FlatCAM/flatcamEditors/FlatCAMExcEditor.py

from PyQt5 import QtGui, QtCore, QtWidgets
from PyQt5.QtCore import Qt, QSettings

from shapely.geometry import LineString, LinearRing, MultiLineString
from shapely.ops import cascaded_union
import shapely.affinity as affinity

from numpy import arctan2, Inf, array, sqrt, sign, dot
from rtree import index as rtindex

from camlib import *
from flatcamGUI.GUIElements import FCEntry, FCComboBox, FCTable, FCDoubleSpinner, LengthEntry, RadioSet, SpinBoxDelegate
from flatcamEditors.FlatCAMGeoEditor import FCShapeTool, DrawTool, DrawToolShape, DrawToolUtilityShape, FlatCAMGeoEditor

from copy import copy, deepcopy

import gettext
import FlatCAMTranslation as fcTranslate
import builtins

fcTranslate.apply_language('strings')
if '_' not in builtins.__dict__:
    _ = gettext.gettext


class FCDrillAdd(FCShapeTool):
    """
    Resulting type: MultiLineString
    """

    def __init__(self, draw_app):
        DrawTool.__init__(self, draw_app)
        self.name = 'drill_add'

        self.selected_dia = None
        try:
            self.draw_app.app.inform.emit(_("Click to place ..."))
            self.selected_dia = self.draw_app.tool2tooldia[self.draw_app.last_tool_selected]

            # as a visual marker, select again in tooltable the actual tool that we are using
            # remember that it was deselected when clicking on canvas
            item = self.draw_app.tools_table_exc.item((self.draw_app.last_tool_selected - 1), 1)
            self.draw_app.tools_table_exc.setCurrentItem(item)

        except KeyError:
            self.draw_app.app.inform.emit(_("[WARNING_NOTCL] To add a drill first select a tool"))
            self.draw_app.select_tool("drill_select")
            return

        try:
            QtGui.QGuiApplication.restoreOverrideCursor()
        except:
            pass
        self.cursor = QtGui.QCursor(QtGui.QPixmap('share/aero_drill.png'))
        QtGui.QGuiApplication.setOverrideCursor(self.cursor)

        geo = self.utility_geometry(data=(self.draw_app.snap_x, self.draw_app.snap_y))

        if isinstance(geo, DrawToolShape) and geo.geo is not None:
            self.draw_app.draw_utility_geometry(geo=geo)

        self.draw_app.app.inform.emit(_("Click on target location ..."))

        # Switch notebook to Selected page
        self.draw_app.app.ui.notebook.setCurrentWidget(self.draw_app.app.ui.selected_tab)

    def click(self, point):
        self.make()
        return "Done."

    def utility_geometry(self, data=None):
        self.points = data
        return DrawToolUtilityShape(self.util_shape(data))

    def util_shape(self, point):
        if point[0] is None and point[1] is None:
            point_x = self.draw_app.x
            point_y = self.draw_app.y
        else:
            point_x = point[0]
            point_y = point[1]

        start_hor_line = ((point_x - (self.selected_dia / 2)), point_y)
        stop_hor_line = ((point_x + (self.selected_dia / 2)), point_y)
        start_vert_line = (point_x, (point_y - (self.selected_dia / 2)))
        stop_vert_line = (point_x, (point_y + (self.selected_dia / 2)))

        return MultiLineString([(start_hor_line, stop_hor_line), (start_vert_line, stop_vert_line)])

    def make(self):

        try:
            QtGui.QGuiApplication.restoreOverrideCursor()
        except:
            pass

        # add the point to drills if the diameter is a key in the dict, if not, create it add the drill location
        # to the value, as a list of itself
        if self.selected_dia in self.draw_app.points_edit:
            self.draw_app.points_edit[self.selected_dia].append(self.points)
        else:
            self.draw_app.points_edit[self.selected_dia] = [self.points]

        self.draw_app.current_storage = self.draw_app.storage_dict[self.selected_dia]
        self.geometry = DrawToolShape(self.util_shape(self.points))
        self.draw_app.in_action = False
        self.complete = True
        self.draw_app.app.inform.emit(_("[success] Done. Drill added."))


class FCDrillArray(FCShapeTool):
    """
    Resulting type: MultiLineString
    """

    def __init__(self, draw_app):
        DrawTool.__init__(self, draw_app)
        self.name = 'drill_array'

        self.draw_app.array_frame.show()

        self.selected_dia = None
        self.drill_axis = 'X'
        self.drill_array = 'linear'
        self.drill_array_size = None
        self.drill_pitch = None
        self.drill_linear_angle = None

        self.drill_angle = None
        self.drill_direction = None
        self.drill_radius = None

        self.origin = None
        self.destination = None
        self.flag_for_circ_array = None

        self.last_dx = 0
        self.last_dy = 0

        self.pt = []

        try:
            self.draw_app.app.inform.emit(_("Click to place ..."))
            self.selected_dia = self.draw_app.tool2tooldia[self.draw_app.last_tool_selected]
            # as a visual marker, select again in tooltable the actual tool that we are using
            # remember that it was deselected when clicking on canvas
            item = self.draw_app.tools_table_exc.item((self.draw_app.last_tool_selected - 1), 1)
            self.draw_app.tools_table_exc.setCurrentItem(item)
        except KeyError:
            self.draw_app.app.inform.emit(_("[WARNING_NOTCL] To add an Drill Array first select a tool in Tool Table"))
            return

        try:
            QtGui.QGuiApplication.restoreOverrideCursor()
        except:
            pass
        self.cursor = QtGui.QCursor(QtGui.QPixmap('share/aero_drill_array.png'))
        QtGui.QGuiApplication.setOverrideCursor(self.cursor)

        geo = self.utility_geometry(data=(self.draw_app.snap_x, self.draw_app.snap_y), static=True)

        if isinstance(geo, DrawToolShape) and geo.geo is not None:
            self.draw_app.draw_utility_geometry(geo=geo)

        self.draw_app.app.inform.emit(_("Click on target location ..."))

        # Switch notebook to Selected page
        self.draw_app.app.ui.notebook.setCurrentWidget(self.draw_app.app.ui.selected_tab)

    def click(self, point):

        if self.drill_array == 'Linear':
            self.make()
            return
        else:
            if self.flag_for_circ_array is None:
                self.draw_app.in_action = True
                self.pt.append(point)

                self.flag_for_circ_array = True
                self.set_origin(point)
                self.draw_app.app.inform.emit(_("Click on the Drill Circular Array Start position"))
            else:
                self.destination = point
                self.make()
                self.flag_for_circ_array = None
                return

    def set_origin(self, origin):
        self.origin = origin

    def utility_geometry(self, data=None, static=None):
        self.drill_axis = self.draw_app.drill_axis_radio.get_value()
        self.drill_direction = self.draw_app.drill_direction_radio.get_value()
        self.drill_array = self.draw_app.array_type_combo.get_value()
        try:
            self.drill_array_size = int(self.draw_app.drill_array_size_entry.get_value())
            try:
                self.drill_pitch = float(self.draw_app.drill_pitch_entry.get_value())
                self.drill_linear_angle = float(self.draw_app.linear_angle_spinner.get_value())
                self.drill_angle = float(self.draw_app.drill_angle_entry.get_value())
            except TypeError:
                self.draw_app.app.inform.emit(
                    _("[ERROR_NOTCL] The value is not Float. Check for comma instead of dot separator."))
                return
        except Exception as e:
            self.draw_app.app.inform.emit(_("[ERROR_NOTCL] The value is mistyped. Check the value. %s") % str(e))
            return

        if self.drill_array == 'Linear':
            if data[0] is None and data[1] is None:
                dx = self.draw_app.x
                dy = self.draw_app.y
            else:
                dx = data[0]
                dy = data[1]

            geo_list = []
            geo = None
            self.points = [dx, dy]

            for item in range(self.drill_array_size):
                if self.drill_axis == 'X':
                    geo = self.util_shape(((dx + (self.drill_pitch * item)), dy))
                if self.drill_axis == 'Y':
                    geo = self.util_shape((dx, (dy + (self.drill_pitch * item))))
                if self.drill_axis == 'A':
                    x_adj = self.drill_pitch * math.cos(math.radians(self.drill_linear_angle))
                    y_adj = self.drill_pitch * math.sin(math.radians(self.drill_linear_angle))
                    geo = self.util_shape(
                        ((dx + (x_adj * item)), (dy + (y_adj * item)))
                    )

                if static is None or static is False:
                    geo_list.append(affinity.translate(geo, xoff=(dx - self.last_dx), yoff=(dy - self.last_dy)))
                else:
                    geo_list.append(geo)
            # self.origin = data

            self.last_dx = dx
            self.last_dy = dy
            return DrawToolUtilityShape(geo_list)
        else:
            if data[0] is None and data[1] is None:
                cdx = self.draw_app.x
                cdy = self.draw_app.y
            else:
                cdx = data[0]
                cdy = data[1]

            if len(self.pt) > 0:
                temp_points = [x for x in self.pt]
                temp_points.append([cdx, cdy])
                return DrawToolUtilityShape(LineString(temp_points))

    def util_shape(self, point):
        if point[0] is None and point[1] is None:
            point_x = self.draw_app.x
            point_y = self.draw_app.y
        else:
            point_x = point[0]
            point_y = point[1]

        start_hor_line = ((point_x - (self.selected_dia / 2)), point_y)
        stop_hor_line = ((point_x + (self.selected_dia / 2)), point_y)
        start_vert_line = (point_x, (point_y - (self.selected_dia / 2)))
        stop_vert_line = (point_x, (point_y + (self.selected_dia / 2)))

        return MultiLineString([(start_hor_line, stop_hor_line), (start_vert_line, stop_vert_line)])

    def make(self):
        self.geometry = []
        geo = None

        try:
            QtGui.QGuiApplication.restoreOverrideCursor()
        except:
            pass

        # add the point to drills if the diameter is a key in the dict, if not, create it add the drill location
        # to the value, as a list of itself
        if self.selected_dia not in self.draw_app.points_edit:
            self.draw_app.points_edit[self.selected_dia] = []
        for i in range(self.drill_array_size):
            self.draw_app.points_edit[self.selected_dia].append(self.points)

        self.draw_app.current_storage = self.draw_app.storage_dict[self.selected_dia]

        if self.drill_array == 'Linear':
            for item in range(self.drill_array_size):
                if self.drill_axis == 'X':
                    geo = self.util_shape(((self.points[0] + (self.drill_pitch * item)), self.points[1]))
                if self.drill_axis == 'Y':
                    geo = self.util_shape((self.points[0], (self.points[1] + (self.drill_pitch * item))))
                if self.drill_axis == 'A':
                    x_adj = self.drill_pitch * math.cos(math.radians(self.drill_linear_angle))
                    y_adj = self.drill_pitch * math.sin(math.radians(self.drill_linear_angle))
                    geo = self.util_shape(
                        ((self.points[0] + (x_adj * item)), (self.points[1] + (y_adj * item)))
                    )

                self.geometry.append(DrawToolShape(geo))
        else:
            if (self.drill_angle * self.drill_array_size) > 360:
                self.draw_app.app.inform.emit(_("[WARNING_NOTCL] Too many drills for the selected spacing angle."))
                return

            radius = distance(self.destination, self.origin)
            initial_angle = math.asin((self.destination[1] - self.origin[1]) / radius)
            for i in range(self.drill_array_size):
                angle_radians = math.radians(self.drill_angle * i)
                if self.drill_direction == 'CW':
                    x = self.origin[0] + radius * math.cos(-angle_radians + initial_angle)
                    y = self.origin[1] + radius * math.sin(-angle_radians + initial_angle)
                else:
                    x = self.origin[0] + radius * math.cos(angle_radians + initial_angle)
                    y = self.origin[1] + radius * math.sin(angle_radians + initial_angle)

                geo = self.util_shape((x, y))
                self.geometry.append(DrawToolShape(geo))
        self.complete = True
        self.draw_app.app.inform.emit(_("[success] Done. Drill Array added."))
        self.draw_app.in_action = False
        self.draw_app.array_frame.hide()
        return


class FCDrillResize(FCShapeTool):
    def __init__(self, draw_app):
        DrawTool.__init__(self, draw_app)
        self.name = 'drill_resize'

        self.draw_app.app.inform.emit(_("Click on the Drill(s) to resize ..."))
        self.resize_dia = None
        self.draw_app.resize_frame.show()
        self.points = None
        self.selected_dia_list = []
        self.current_storage = None
        self.geometry = []
        self.destination_storage = None

        self.draw_app.resize_btn.clicked.connect(self.make)

        # Switch notebook to Selected page
        self.draw_app.app.ui.notebook.setCurrentWidget(self.draw_app.app.ui.selected_tab)

    def make(self):
        self.draw_app.is_modified = True

        try:
            new_dia = self.draw_app.resdrill_entry.get_value()
        except:
            self.draw_app.app.inform.emit(
                _("[ERROR_NOTCL] Resize drill(s) failed. Please enter a diameter for resize.")
            )
            return

        if new_dia not in self.draw_app.olddia_newdia:
            self.destination_storage = FlatCAMGeoEditor.make_storage()
            self.draw_app.storage_dict[new_dia] = self.destination_storage

            # self.olddia_newdia dict keeps the evidence on current tools diameters as keys and gets updated on values
            # each time a tool diameter is edited or added
            self.draw_app.olddia_newdia[new_dia] = new_dia
        else:
            self.destination_storage = self.draw_app.storage_dict[new_dia]

        for index in self.draw_app.tools_table_exc.selectedIndexes():
            row = index.row()
            # on column 1 in tool tables we hold the diameters, and we retrieve them as strings
            # therefore below we convert to float
            dia_on_row = self.draw_app.tools_table_exc.item(row, 1).text()
            self.selected_dia_list.append(float(dia_on_row))

        # since we add a new tool, we update also the intial state of the tool_table through it's dictionary
        # we add a new entry in the tool2tooldia dict
        self.draw_app.tool2tooldia[len(self.draw_app.olddia_newdia)] = new_dia

        sel_shapes_to_be_deleted = []

        if self.selected_dia_list:
            for sel_dia in self.selected_dia_list:
                self.current_storage = self.draw_app.storage_dict[sel_dia]
                for select_shape in self.draw_app.get_selected():
                    if select_shape in self.current_storage.get_objects():
                        factor = new_dia / sel_dia
                        self.geometry.append(
                            DrawToolShape(affinity.scale(select_shape.geo, xfact=factor, yfact=factor, origin='center'))
                        )
                        self.current_storage.remove(select_shape)
                        # a hack to make the tool_table display less drills per diameter when shape(drill) is deleted
                        # self.points_edit it's only useful first time when we load the data into the storage
                        # but is still used as reference when building tool_table in self.build_ui()
                        # the number of drills displayed in column 2 is just a len(self.points_edit) therefore
                        # deleting self.points_edit elements (doesn't matter who but just the number)
                        # solved the display issue.
                        del self.draw_app.points_edit[sel_dia][0]

                        sel_shapes_to_be_deleted.append(select_shape)

                        self.draw_app.on_exc_shape_complete(self.destination_storage)
                        # a hack to make the tool_table display more drills per diameter when shape(drill) is added
                        # self.points_edit it's only useful first time when we load the data into the storage
                        # but is still used as reference when building tool_table in self.build_ui()
                        # the number of drills displayed in column 2 is just a len(self.points_edit) therefore
                        # deleting self.points_edit elements (doesn't matter who but just the number)
                        # solved the display issue.
                        if new_dia not in self.draw_app.points_edit:
                            self.draw_app.points_edit[new_dia] = [(0, 0)]
                        else:
                            self.draw_app.points_edit[new_dia].append((0, 0))
                        self.geometry = []

                        # if following the resize of the drills there will be no more drills for the selected tool then
                        # delete that tool
                        if not self.draw_app.points_edit[sel_dia]:
                            self.draw_app.on_tool_delete(sel_dia)

            for shp in sel_shapes_to_be_deleted:
                self.draw_app.selected.remove(shp)

            self.draw_app.build_ui()
            self.draw_app.replot()
            self.draw_app.app.inform.emit(_("[success] Done. Drill Resize completed."))

        else:
            self.draw_app.app.inform.emit(_("[WARNING_NOTCL] Cancelled. No drills selected for resize ..."))

        self.draw_app.resize_frame.hide()
        self.complete = True

        # MS: always return to the Select Tool
        self.draw_app.select_tool("drill_select")


class FCDrillMove(FCShapeTool):
    def __init__(self, draw_app):
        DrawTool.__init__(self, draw_app)
        self.name = 'drill_move'

        # self.shape_buffer = self.draw_app.shape_buffer
        self.origin = None
        self.destination = None
        self.selected_dia_list = []

        if self.draw_app.launched_from_shortcuts is True:
            self.draw_app.launched_from_shortcuts = False
            self.draw_app.app.inform.emit(_("Click on target location ..."))
        else:
            self.draw_app.app.inform.emit(_("Click on reference location ..."))
        self.current_storage = None
        self.geometry = []

        for index in self.draw_app.tools_table_exc.selectedIndexes():
            row = index.row()
            # on column 1 in tool tables we hold the diameters, and we retrieve them as strings
            # therefore below we convert to float
            dia_on_row = self.draw_app.tools_table_exc.item(row, 1).text()
            self.selected_dia_list.append(float(dia_on_row))

        # Switch notebook to Selected page
        self.draw_app.app.ui.notebook.setCurrentWidget(self.draw_app.app.ui.selected_tab)

    def set_origin(self, origin):
        self.origin = origin

    def click(self, point):
        if len(self.draw_app.get_selected()) == 0:
            return "Nothing to move."

        if self.origin is None:
            self.set_origin(point)
            self.draw_app.app.inform.emit(_("Click on target location ..."))
            return
        else:
            self.destination = point
            self.make()

            # MS: always return to the Select Tool
            self.draw_app.select_tool("drill_select")
            return

    def make(self):
        # Create new geometry
        dx = self.destination[0] - self.origin[0]
        dy = self.destination[1] - self.origin[1]
        sel_shapes_to_be_deleted = []

        for sel_dia in self.selected_dia_list:
            self.current_storage = self.draw_app.storage_dict[sel_dia]
            for select_shape in self.draw_app.get_selected():
                if select_shape in self.current_storage.get_objects():

                    self.geometry.append(DrawToolShape(affinity.translate(select_shape.geo, xoff=dx, yoff=dy)))
                    self.current_storage.remove(select_shape)
                    sel_shapes_to_be_deleted.append(select_shape)
                    self.draw_app.on_exc_shape_complete(self.current_storage)
                    self.geometry = []

            for shp in sel_shapes_to_be_deleted:
                self.draw_app.selected.remove(shp)
            sel_shapes_to_be_deleted = []

        self.draw_app.build_ui()
        self.draw_app.app.inform.emit(_("[success] Done. Drill(s) Move completed."))

    def utility_geometry(self, data=None):
        """
        Temporary geometry on screen while using this tool.

        :param data:
        :return:
        """
        geo_list = []

        if self.origin is None:
            return None

        if len(self.draw_app.get_selected()) == 0:
            return None

        dx = data[0] - self.origin[0]
        dy = data[1] - self.origin[1]
        for geom in self.draw_app.get_selected():
            geo_list.append(affinity.translate(geom.geo, xoff=dx, yoff=dy))
        return DrawToolUtilityShape(geo_list)


class FCDrillCopy(FCDrillMove):
    def __init__(self, draw_app):
        FCDrillMove.__init__(self, draw_app)
        self.name = 'drill_copy'

    def make(self):
        # Create new geometry
        dx = self.destination[0] - self.origin[0]
        dy = self.destination[1] - self.origin[1]
        sel_shapes_to_be_deleted = []

        for sel_dia in self.selected_dia_list:
            self.current_storage = self.draw_app.storage_dict[sel_dia]
            for select_shape in self.draw_app.get_selected():
                if select_shape in self.current_storage.get_objects():
                    self.geometry.append(DrawToolShape(affinity.translate(select_shape.geo, xoff=dx, yoff=dy)))

                    # add some fake drills into the self.draw_app.points_edit to update the drill count in tool table
                    self.draw_app.points_edit[sel_dia].append((0, 0))

                    sel_shapes_to_be_deleted.append(select_shape)
                    self.draw_app.on_exc_shape_complete(self.current_storage)
                    self.geometry = []

            for shp in sel_shapes_to_be_deleted:
                self.draw_app.selected.remove(shp)
            sel_shapes_to_be_deleted = []

        self.draw_app.build_ui()
        self.draw_app.app.inform.emit(_("[success] Done. Drill(s) copied."))


class FCDrillSelect(DrawTool):
    def __init__(self, exc_editor_app):
        DrawTool.__init__(self, exc_editor_app)
        self.name = 'drill_select'

        try:
            QtGui.QGuiApplication.restoreOverrideCursor()
        except:
            pass

        self.exc_editor_app = exc_editor_app
        self.storage = self.exc_editor_app.storage_dict
        # self.selected = self.exc_editor_app.selected

        # here we store all shapes that were selected so we can search for the nearest to our click location
        self.sel_storage = FlatCAMExcEditor.make_storage()

        self.exc_editor_app.resize_frame.hide()
        self.exc_editor_app.array_frame.hide()

    def click(self, point):
        key_modifier = QtWidgets.QApplication.keyboardModifiers()
        if self.exc_editor_app.app.defaults["global_mselect_key"] == 'Control':
            if key_modifier == Qt.ControlModifier:
                pass
            else:
                self.exc_editor_app.selected = []
        else:
            if key_modifier == Qt.ShiftModifier:
                pass
            else:
                self.exc_editor_app.selected = []

    def click_release(self, pos):
        self.exc_editor_app.tools_table_exc.clearSelection()

        try:
            for storage in self.exc_editor_app.storage_dict:
                for sh in self.exc_editor_app.storage_dict[storage].get_objects():
                    self.sel_storage.insert(sh)

            _, closest_shape = self.sel_storage.nearest(pos)

            # constrain selection to happen only within a certain bounding box
            x_coord, y_coord = closest_shape.geo[0].xy
            delta = (x_coord[1] - x_coord[0])
            # closest_shape_coords = (((x_coord[0] + delta / 2)), y_coord[0])
            xmin = x_coord[0] - (0.7 * delta)
            xmax = x_coord[0] + (1.7 * delta)
            ymin = y_coord[0] - (0.7 * delta)
            ymax = y_coord[0] + (1.7 * delta)
        except StopIteration:
            return ""

        if pos[0] < xmin or pos[0] > xmax or pos[1] < ymin or pos[1] > ymax:
            self.exc_editor_app.selected = []
        else:
            modifiers = QtWidgets.QApplication.keyboardModifiers()
            mod_key = 'Control'
            if modifiers == QtCore.Qt.ShiftModifier:
                mod_key = 'Shift'
            elif modifiers == QtCore.Qt.ControlModifier:
                mod_key = 'Control'

            if mod_key == self.draw_app.app.defaults["global_mselect_key"]:
                if closest_shape in self.exc_editor_app.selected:
                    self.exc_editor_app.selected.remove(closest_shape)
                else:
                    self.exc_editor_app.selected.append(closest_shape)
            else:
                self.draw_app.selected = []
                self.draw_app.selected.append(closest_shape)

            # select the diameter of the selected shape in the tool table
            try:
                self.draw_app.tools_table_exc.cellPressed.disconnect()
            except:
                pass

            sel_tools = set()
            self.exc_editor_app.tools_table_exc.setSelectionMode(QtWidgets.QAbstractItemView.MultiSelection)
            for shape_s in self.exc_editor_app.selected:
                for storage in self.exc_editor_app.storage_dict:
                    if shape_s in self.exc_editor_app.storage_dict[storage].get_objects():
                        sel_tools.add(storage)

            for storage in sel_tools:
                for k, v in self.draw_app.tool2tooldia.items():
                    if v == storage:
                        self.exc_editor_app.tools_table_exc.selectRow(int(k) - 1)
                        self.draw_app.last_tool_selected = int(k)
                        break

            self.exc_editor_app.tools_table_exc.setSelectionMode(QtWidgets.QAbstractItemView.ExtendedSelection)

            self.draw_app.tools_table_exc.cellPressed.connect(self.draw_app.on_row_selected)

        # delete whatever is in selection storage, there is no longer need for those shapes
        self.sel_storage = FlatCAMExcEditor.make_storage()

        return ""

        # pos[0] and pos[1] are the mouse click coordinates (x, y)
        # for storage in self.exc_editor_app.storage_dict:
        #     for obj_shape in self.exc_editor_app.storage_dict[storage].get_objects():
        #         minx, miny, maxx, maxy = obj_shape.geo.bounds
        #         if (minx <= pos[0] <= maxx) and (miny <= pos[1] <= maxy):
        #             over_shape_list.append(obj_shape)
        #
        # try:
        #     # if there is no shape under our click then deselect all shapes
        #     if not over_shape_list:
        #         self.exc_editor_app.selected = []
        #         FlatCAMExcEditor.draw_shape_idx = -1
        #         self.exc_editor_app.tools_table_exc.clearSelection()
        #     else:
        #         # if there are shapes under our click then advance through the list of them, one at the time in a
        #         # circular way
        #         FlatCAMExcEditor.draw_shape_idx = (FlatCAMExcEditor.draw_shape_idx + 1) % len(over_shape_list)
        #         obj_to_add = over_shape_list[int(FlatCAMExcEditor.draw_shape_idx)]
        #
        #         if self.exc_editor_app.app.defaults["global_mselect_key"] == 'Shift':
        #             if self.exc_editor_app.modifiers == Qt.ShiftModifier:
        #                 if obj_to_add in self.exc_editor_app.selected:
        #                     self.exc_editor_app.selected.remove(obj_to_add)
        #                 else:
        #                     self.exc_editor_app.selected.append(obj_to_add)
        #             else:
        #                 self.exc_editor_app.selected = []
        #                 self.exc_editor_app.selected.append(obj_to_add)
        #         else:
        #             # if CONTROL key is pressed then we add to the selected list the current shape but if it's already
        #             # in the selected list, we removed it. Therefore first click selects, second deselects.
        #             if self.exc_editor_app.modifiers == Qt.ControlModifier:
        #                 if obj_to_add in self.exc_editor_app.selected:
        #                     self.exc_editor_app.selected.remove(obj_to_add)
        #                 else:
        #                     self.exc_editor_app.selected.append(obj_to_add)
        #             else:
        #                 self.exc_editor_app.selected = []
        #                 self.exc_editor_app.selected.append(obj_to_add)
        #
        #     for storage in self.exc_editor_app.storage_dict:
        #         for shape in self.exc_editor_app.selected:
        #             if shape in self.exc_editor_app.storage_dict[storage].get_objects():
        #                 for key in self.exc_editor_app.tool2tooldia:
        #                     if self.exc_editor_app.tool2tooldia[key] == storage:
        #                         item = self.exc_editor_app.tools_table_exc.item((key - 1), 1)
        #                         item.setSelected(True)
        #                         # self.exc_editor_app.tools_table_exc.selectItem(key - 1)
        #
        # except Exception as e:
        #     log.error("[ERROR] Something went bad. %s" % str(e))
        #     raise


class FlatCAMExcEditor(QtCore.QObject):

    draw_shape_idx = -1

    def __init__(self, app):
        assert isinstance(app, FlatCAMApp.App), "Expected the app to be a FlatCAMApp.App, got %s" % type(app)

        super(FlatCAMExcEditor, self).__init__()

        self.app = app
        self.canvas = self.app.plotcanvas

        # ## Current application units in Upper Case
        self.units = self.app.ui.general_defaults_form.general_app_group.units_radio.get_value().upper()

        self.exc_edit_widget = QtWidgets.QWidget()
        # ## Box for custom widgets
        # This gets populated in offspring implementations.
        layout = QtWidgets.QVBoxLayout()
        self.exc_edit_widget.setLayout(layout)

        # add a frame and inside add a vertical box layout. Inside this vbox layout I add all the Drills widgets
        # this way I can hide/show the frame
        self.drills_frame = QtWidgets.QFrame()
        self.drills_frame.setContentsMargins(0, 0, 0, 0)
        layout.addWidget(self.drills_frame)
        self.tools_box = QtWidgets.QVBoxLayout()
        self.tools_box.setContentsMargins(0, 0, 0, 0)
        self.drills_frame.setLayout(self.tools_box)

        # ## Page Title box (spacing between children)
        self.title_box = QtWidgets.QHBoxLayout()
        self.tools_box.addLayout(self.title_box)

        # ## Page Title icon
        pixmap = QtGui.QPixmap('share/flatcam_icon32.png')
        self.icon = QtWidgets.QLabel()
        self.icon.setPixmap(pixmap)
        self.title_box.addWidget(self.icon, stretch=0)

        # ## Title label
        self.title_label = QtWidgets.QLabel("<font size=5><b>%s</b></font>" % _('Excellon Editor'))
        self.title_label.setAlignment(QtCore.Qt.AlignLeft | QtCore.Qt.AlignVCenter)
        self.title_box.addWidget(self.title_label, stretch=1)

        # ## Object name
        self.name_box = QtWidgets.QHBoxLayout()
        self.tools_box.addLayout(self.name_box)
        name_label = QtWidgets.QLabel(_("Name:"))
        self.name_box.addWidget(name_label)
        self.name_entry = FCEntry()
        self.name_box.addWidget(self.name_entry)

        # ### Tools Drills ## ##
        self.tools_table_label = QtWidgets.QLabel("<b>%s</b>" % _('Tools Table'))
        self.tools_table_label.setToolTip(
           _("Tools in this Excellon object\n"
             "when are used for drilling.")
        )
        self.tools_box.addWidget(self.tools_table_label)

        self.tools_table_exc = FCTable()
        # delegate = SpinBoxDelegate(units=self.units)
        # self.tools_table_exc.setItemDelegateForColumn(1, delegate)

        self.tools_box.addWidget(self.tools_table_exc)

        self.tools_table_exc.setColumnCount(4)
        self.tools_table_exc.setHorizontalHeaderLabels(['#', _('Diameter'), 'D', 'S'])
        self.tools_table_exc.setSortingEnabled(False)
        self.tools_table_exc.setSelectionBehavior(QtWidgets.QAbstractItemView.SelectRows)

        self.empty_label = QtWidgets.QLabel('')
        self.tools_box.addWidget(self.empty_label)

        # ### Add a new Tool ## ##
        self.addtool_label = QtWidgets.QLabel('<b>%s</b>' % _('Add/Delete Tool'))
        self.addtool_label.setToolTip(
            _("Add/Delete a tool to the tool list\n"
              "for this Excellon object.")
        )
        self.tools_box.addWidget(self.addtool_label)

        grid1 = QtWidgets.QGridLayout()
        self.tools_box.addLayout(grid1)

        addtool_entry_lbl = QtWidgets.QLabel(_('Tool Dia:'))
        addtool_entry_lbl.setToolTip(
            _("Diameter for the new tool")
        )

        hlay = QtWidgets.QHBoxLayout()
        self.addtool_entry = FCEntry()
        self.addtool_entry.setValidator(QtGui.QDoubleValidator(0.0001, 99.9999, 4))
        hlay.addWidget(self.addtool_entry)

        self.addtool_btn = QtWidgets.QPushButton(_('Add Tool'))
        self.addtool_btn.setToolTip(
           _("Add a new tool to the tool list\n"
             "with the diameter specified above.")
        )
        self.addtool_btn.setFixedWidth(80)
        hlay.addWidget(self.addtool_btn)

        grid1.addWidget(addtool_entry_lbl, 0, 0)
        grid1.addLayout(hlay, 0, 1)

        grid2 = QtWidgets.QGridLayout()
        self.tools_box.addLayout(grid2)

        self.deltool_btn = QtWidgets.QPushButton(_('Delete Tool'))
        self.deltool_btn.setToolTip(
           _("Delete a tool in the tool list\n"
             "by selecting a row in the tool table.")
        )
        grid2.addWidget(self.deltool_btn, 0, 1)

        # add a frame and inside add a vertical box layout. Inside this vbox layout I add all the Drills widgets
        # this way I can hide/show the frame
        self.resize_frame = QtWidgets.QFrame()
        self.resize_frame.setContentsMargins(0, 0, 0, 0)
        self.tools_box.addWidget(self.resize_frame)
        self.resize_box = QtWidgets.QVBoxLayout()
        self.resize_box.setContentsMargins(0, 0, 0, 0)
        self.resize_frame.setLayout(self.resize_box)

        # ### Resize a  drill ## ##
        self.emptyresize_label = QtWidgets.QLabel('')
        self.resize_box.addWidget(self.emptyresize_label)

        self.drillresize_label = QtWidgets.QLabel('<b>%s</b>' % _("Resize Drill(s)"))
        self.drillresize_label.setToolTip(
            _("Resize a drill or a selection of drills.")
        )
        self.resize_box.addWidget(self.drillresize_label)

        grid3 = QtWidgets.QGridLayout()
        self.resize_box.addLayout(grid3)

        res_entry_lbl = QtWidgets.QLabel(_('Resize Dia:'))
        res_entry_lbl.setToolTip(
           _( "Diameter to resize to.")
        )
        grid3.addWidget(res_entry_lbl, 0, 0)

        hlay2 = QtWidgets.QHBoxLayout()
        self.resdrill_entry = LengthEntry()
        hlay2.addWidget(self.resdrill_entry)

        self.resize_btn = QtWidgets.QPushButton(_('Resize'))
        self.resize_btn.setToolTip(
            _("Resize drill(s)")
        )
        self.resize_btn.setFixedWidth(80)
        hlay2.addWidget(self.resize_btn)
        grid3.addLayout(hlay2, 0, 1)

        self.resize_frame.hide()

        # add a frame and inside add a vertical box layout. Inside this vbox layout I add
        # all the add drill array  widgets
        # this way I can hide/show the frame
        self.array_frame = QtWidgets.QFrame()
        self.array_frame.setContentsMargins(0, 0, 0, 0)
        self.tools_box.addWidget(self.array_frame)
        self.array_box = QtWidgets.QVBoxLayout()
        self.array_box.setContentsMargins(0, 0, 0, 0)
        self.array_frame.setLayout(self.array_box)

        # ### Add DRILL Array ## ##
        self.emptyarray_label = QtWidgets.QLabel('')
        self.array_box.addWidget(self.emptyarray_label)

        self.drillarray_label = QtWidgets.QLabel('<b>%s</b>' % _("Add Drill Array"))
        self.drillarray_label.setToolTip(
            _("Add an array of drills (linear or circular array)")
        )
        self.array_box.addWidget(self.drillarray_label)

        self.array_type_combo = FCComboBox()
        self.array_type_combo.setToolTip(
           _( "Select the type of drills array to create.\n"
              "It can be Linear X(Y) or Circular")
        )
        self.array_type_combo.addItem(_("Linear"))
        self.array_type_combo.addItem(_("Circular"))

        self.array_box.addWidget(self.array_type_combo)

        self.array_form = QtWidgets.QFormLayout()
        self.array_box.addLayout(self.array_form)

        # Set the number of drill holes in the drill array
        self.drill_array_size_label = QtWidgets.QLabel(_('Nr of drills:'))
        self.drill_array_size_label.setToolTip(
            _("Specify how many drills to be in the array.")
        )
        self.drill_array_size_label.setFixedWidth(100)

        self.drill_array_size_entry = LengthEntry()
        self.array_form.addRow(self.drill_array_size_label, self.drill_array_size_entry)

        self.array_linear_frame = QtWidgets.QFrame()
        self.array_linear_frame.setContentsMargins(0, 0, 0, 0)
        self.array_box.addWidget(self.array_linear_frame)
        self.linear_box = QtWidgets.QVBoxLayout()
        self.linear_box.setContentsMargins(0, 0, 0, 0)
        self.array_linear_frame.setLayout(self.linear_box)

        self.linear_form = QtWidgets.QFormLayout()
        self.linear_box.addLayout(self.linear_form)

        # Linear Drill Array direction
        self.drill_axis_label = QtWidgets.QLabel(_('Direction:'))
        self.drill_axis_label.setToolTip(
            _("Direction on which the linear array is oriented:\n"
              "- 'X' - horizontal axis \n"
              "- 'Y' - vertical axis or \n"
              "- 'Angle' - a custom angle for the array inclination")
        )
        self.drill_axis_label.setFixedWidth(100)

        self.drill_axis_radio = RadioSet([{'label': 'X', 'value': 'X'},
                                          {'label': 'Y', 'value': 'Y'},
                                          {'label': 'Angle', 'value': 'A'}])
        self.linear_form.addRow(self.drill_axis_label, self.drill_axis_radio)

        # Linear Drill Array pitch distance
        self.drill_pitch_label = QtWidgets.QLabel(_('Pitch:'))
        self.drill_pitch_label.setToolTip(
            _("Pitch = Distance between elements of the array.")
        )
        self.drill_pitch_label.setFixedWidth(100)

        self.drill_pitch_entry = LengthEntry()
        self.linear_form.addRow(self.drill_pitch_label, self.drill_pitch_entry)

        # Linear Drill Array angle
        self.linear_angle_label = QtWidgets.QLabel(_('Angle:'))
        self.linear_angle_label.setToolTip(
           _( "Angle at which the linear array is placed.\n"
              "The precision is of max 2 decimals.\n"
              "Min value is: -359.99 degrees.\n"
              "Max value is:  360.00 degrees.")
        )
        self.linear_angle_label.setFixedWidth(100)

        self.linear_angle_spinner = FCDoubleSpinner()
        self.linear_angle_spinner.set_precision(2)
        self.linear_angle_spinner.setRange(-359.99, 360.00)
        self.linear_form.addRow(self.linear_angle_label, self.linear_angle_spinner)

        self.array_circular_frame = QtWidgets.QFrame()
        self.array_circular_frame.setContentsMargins(0, 0, 0, 0)
        self.array_box.addWidget(self.array_circular_frame)
        self.circular_box = QtWidgets.QVBoxLayout()
        self.circular_box.setContentsMargins(0, 0, 0, 0)
        self.array_circular_frame.setLayout(self.circular_box)

        self.drill_direction_label = QtWidgets.QLabel(_('Direction:'))
        self.drill_direction_label.setToolTip(
           _( "Direction for circular array."
              "Can be CW = clockwise or CCW = counter clockwise.")
        )
        self.drill_direction_label.setFixedWidth(100)

        self.circular_form = QtWidgets.QFormLayout()
        self.circular_box.addLayout(self.circular_form)

        self.drill_direction_radio = RadioSet([{'label': 'CW', 'value': 'CW'},
                                               {'label': 'CCW.', 'value': 'CCW'}])
        self.drill_direction_radio.set_value('CW')
        self.circular_form.addRow(self.drill_direction_label, self.drill_direction_radio)

        self.drill_angle_label = QtWidgets.QLabel(_('Angle:'))
        self.drill_angle_label.setToolTip(
            _("Angle at which each element in circular array is placed.")
        )
        self.drill_angle_label.setFixedWidth(100)

        self.drill_angle_entry = LengthEntry()
        self.circular_form.addRow(self.drill_angle_label, self.drill_angle_entry)

        self.array_circular_frame.hide()

        self.linear_angle_spinner.hide()
        self.linear_angle_label.hide()

        self.array_frame.hide()
        self.tools_box.addStretch()

        # ## Toolbar events and properties
        self.tools_exc = {
            "drill_select": {"button": self.app.ui.select_drill_btn,
                             "constructor": FCDrillSelect},
            "drill_add": {"button": self.app.ui.add_drill_btn,
                          "constructor": FCDrillAdd},
            "drill_array": {"button": self.app.ui.add_drill_array_btn,
                            "constructor": FCDrillArray},
            "drill_resize": {"button": self.app.ui.resize_drill_btn,
                             "constructor": FCDrillResize},
            "drill_copy": {"button": self.app.ui.copy_drill_btn,
                           "constructor": FCDrillCopy},
            "drill_move": {"button": self.app.ui.move_drill_btn,
                           "constructor": FCDrillMove},
        }

        # ## Data
        self.active_tool = None

        self.in_action = False

        self.storage_dict = {}
        self.current_storage = []

        # build the data from the Excellon point into a dictionary
        #  {tool_dia: [geometry_in_points]}
        self.points_edit = {}
        self.sorted_diameters =[]

        self.new_drills = []
        self.new_tools = {}
        self.new_slots = {}
        self.new_tool_offset = {}

        # dictionary to store the tool_row and diameters in Tool_table
        # it will be updated everytime self.build_ui() is called
        self.olddia_newdia = {}

        self.tool2tooldia = {}

        # this will store the value for the last selected tool, for use after clicking on canvas when the selection
        # is cleared but as a side effect also the selected tool is cleared
        self.last_tool_selected = None
        self.utility = []

        # this will flag if the Editor "tools" are launched from key shortcuts (True) or from menu toolbar (False)
        self.launched_from_shortcuts = False

        # this var will store the state of the toolbar before starting the editor
        self.toolbar_old_state = False

        self.app.ui.delete_drill_btn.triggered.connect(self.on_delete_btn)
        self.name_entry.returnPressed.connect(self.on_name_activate)
        self.addtool_btn.clicked.connect(self.on_tool_add)
        self.addtool_entry.returnPressed.connect(self.on_tool_add)
        self.deltool_btn.clicked.connect(self.on_tool_delete)
        # self.tools_table_exc.selectionModel().currentChanged.connect(self.on_row_selected)
        self.tools_table_exc.cellPressed.connect(self.on_row_selected)

        self.array_type_combo.currentIndexChanged.connect(self.on_array_type_combo)

        self.drill_axis_radio.activated_custom.connect(self.on_linear_angle_radio)

        self.app.ui.exc_add_array_drill_menuitem.triggered.connect(self.exc_add_drill_array)
        self.app.ui.exc_add_drill_menuitem.triggered.connect(self.exc_add_drill)

        self.app.ui.exc_resize_drill_menuitem.triggered.connect(self.exc_resize_drills)
        self.app.ui.exc_copy_drill_menuitem.triggered.connect(self.exc_copy_drills)
        self.app.ui.exc_delete_drill_menuitem.triggered.connect(self.on_delete_btn)

        self.app.ui.exc_move_drill_menuitem.triggered.connect(self.exc_move_drills)

        # Init GUI
        self.drill_array_size_entry.set_value(5)
        self.drill_pitch_entry.set_value(2.54)
        self.drill_angle_entry.set_value(12)
        self.drill_direction_radio.set_value('CW')
        self.drill_axis_radio.set_value('X')

        self.exc_obj = None

        # VisPy Visuals
        self.shapes = self.app.plotcanvas.new_shape_collection(layers=1)
        self.tool_shape = self.app.plotcanvas.new_shape_collection(layers=1)
        self.app.pool_recreated.connect(self.pool_recreated)

        # Remove from scene
        self.shapes.enabled = False
        self.tool_shape.enabled = False

        # ## List of selected shapes.
        self.selected = []

        self.move_timer = QtCore.QTimer()
        self.move_timer.setSingleShot(True)

        self.key = None  # Currently pressed key
        self.modifiers = None
        self.x = None  # Current mouse cursor pos
        self.y = None
        # Current snapped mouse pos
        self.snap_x = None
        self.snap_y = None
        self.pos = None

        self.complete = False

        def make_callback(thetool):
            def f():
                self.on_tool_select(thetool)
            return f

        for tool in self.tools_exc:
            self.tools_exc[tool]["button"].triggered.connect(make_callback(tool))  # Events
            self.tools_exc[tool]["button"].setCheckable(True)  # Checkable

        self.options = {
            "global_gridx": 0.1,
            "global_gridy": 0.1,
            "snap_max": 0.05,
            "grid_snap": True,
            "corner_snap": False,
            "grid_gap_link": True
        }
        self.app.options_read_form()

        for option in self.options:
            if option in self.app.options:
                self.options[option] = self.app.options[option]

        self.rtree_exc_index = rtindex.Index()
        # flag to show if the object was modified
        self.is_modified = False

        self.edited_obj_name = ""

        # variable to store the total amount of drills per job
        self.tot_drill_cnt = 0
        self.tool_row = 0

        # variable to store the total amount of slots per job
        self.tot_slot_cnt = 0
        self.tool_row_slots = 0

        self.tool_row = 0

        # store the status of the editor so the Delete at object level will not work until the edit is finished
        self.editor_active = False

        def entry2option(option, entry):
            self.options[option] = float(entry.text())

        # store the status of the editor so the Delete at object level will not work until the edit is finished
        self.editor_active = False

    def pool_recreated(self, pool):
        self.shapes.pool = pool
        self.tool_shape.pool = pool

    @staticmethod
    def make_storage():

        # ## Shape storage.
        storage = FlatCAMRTreeStorage()
        storage.get_points = DrawToolShape.get_pts

        return storage

    def set_ui(self):

        # updated units
        self.units = self.app.ui.general_defaults_form.general_app_group.units_radio.get_value().upper()

        self.olddia_newdia.clear()
        self.tool2tooldia.clear()

        # build the self.points_edit dict {dimaters: [point_list]}
        for drill in self.exc_obj.drills:
            if drill['tool'] in self.exc_obj.tools:
                if self.units == 'IN':
                    tool_dia = float('%.3f' % self.exc_obj.tools[drill['tool']]['C'])
                else:
                    tool_dia = float('%.2f' % self.exc_obj.tools[drill['tool']]['C'])

                try:
                    self.points_edit[tool_dia].append(drill['point'])
                except KeyError:
                    self.points_edit[tool_dia] = [drill['point']]
        # update the olddia_newdia dict to make sure we have an updated state of the tool_table
        for key in self.points_edit:
            self.olddia_newdia[key] = key

        sort_temp = []
        for diam in self.olddia_newdia:
            sort_temp.append(float(diam))
        self.sorted_diameters = sorted(sort_temp)

        # populate self.intial_table_rows dict with the tool number as keys and tool diameters as values
        if self.exc_obj.diameterless is False:
            for i in range(len(self.sorted_diameters)):
                tt_dia = self.sorted_diameters[i]
                self.tool2tooldia[i + 1] = tt_dia
        else:
            # the Excellon object has diameters that are bogus information, added by the application because the
            # Excellon file has no tool diameter information. In this case do not order the diameter in the table
            # but use the real order found in the exc_obj.tools
            for k, v in self.exc_obj.tools.items():
                if self.units == 'IN':
                    tool_dia = float('%.3f' % v['C'])
                else:
                    tool_dia = float('%.2f' % v['C'])
                self.tool2tooldia[int(k)] = tool_dia

    def build_ui(self, first_run=None):

        try:
            # if connected, disconnect the signal from the slot on item_changed as it creates issues
            self.tools_table_exc.itemChanged.disconnect()
        except:
            pass

        try:
            self.tools_table_exc.cellPressed.disconnect()
        except:
            pass

        # updated units
        self.units = self.app.ui.general_defaults_form.general_app_group.units_radio.get_value().upper()

        # make a new name for the new Excellon object (the one with edited content)
        self.edited_obj_name = self.exc_obj.options['name']
        self.name_entry.set_value(self.edited_obj_name)

        if self.units == "IN":
            self.addtool_entry.set_value(0.039)
        else:
            self.addtool_entry.set_value(1.00)

        sort_temp = []

        for diam in self.olddia_newdia:
            sort_temp.append(float(diam))
        self.sorted_diameters = sorted(sort_temp)

        # here, self.sorted_diameters will hold in a oblique way, the number of tools
        n = len(self.sorted_diameters)
        # we have (n+2) rows because there are 'n' tools, each a row, plus the last 2 rows for totals.
        self.tools_table_exc.setRowCount(n + 2)

        self.tot_drill_cnt = 0
        self.tot_slot_cnt = 0

        self.tool_row = 0
        # this variable will serve as the real tool_number
        tool_id = 0

        for tool_no in self.sorted_diameters:
            tool_id += 1
            drill_cnt = 0  # variable to store the nr of drills per tool
            slot_cnt = 0  # variable to store the nr of slots per tool

            # Find no of drills for the current tool
            for tool_dia in self.points_edit:
                if float(tool_dia) == tool_no:
                    drill_cnt = len(self.points_edit[tool_dia])

            self.tot_drill_cnt += drill_cnt

            try:
                # Find no of slots for the current tool
                for slot in self.slots:
                    if slot['tool'] == tool_no:
                        slot_cnt += 1

                self.tot_slot_cnt += slot_cnt
            except AttributeError:
                # log.debug("No slots in the Excellon file")
                # slot editing not implemented
                pass

            idd = QtWidgets.QTableWidgetItem('%d' % int(tool_id))
            idd.setFlags(QtCore.Qt.ItemIsSelectable | QtCore.Qt.ItemIsEnabled)
            self.tools_table_exc.setItem(self.tool_row, 0, idd)  # Tool name/id

            # Make sure that the drill diameter when in MM is with no more than 2 decimals
            # There are no drill bits in MM with more than 3 decimals diameter
            # For INCH the decimals should be no more than 3. There are no drills under 10mils
            if self.units == 'MM':
                dia = QtWidgets.QTableWidgetItem('%.2f' % self.olddia_newdia[tool_no])
            else:
                dia = QtWidgets.QTableWidgetItem('%.3f' % self.olddia_newdia[tool_no])

            dia.setFlags(QtCore.Qt.ItemIsEnabled)

            drill_count = QtWidgets.QTableWidgetItem('%d' % drill_cnt)
            drill_count.setFlags(QtCore.Qt.ItemIsEnabled)

            # if the slot number is zero is better to not clutter the GUI with zero's so we print a space
            if slot_cnt > 0:
                slot_count = QtWidgets.QTableWidgetItem('%d' % slot_cnt)
            else:
                slot_count = QtWidgets.QTableWidgetItem('')
            slot_count.setFlags(QtCore.Qt.ItemIsEnabled)

            self.tools_table_exc.setItem(self.tool_row, 1, dia)  # Diameter
            self.tools_table_exc.setItem(self.tool_row, 2, drill_count)  # Number of drills per tool
            self.tools_table_exc.setItem(self.tool_row, 3, slot_count)  # Number of drills per tool

            if first_run is True:
                # set now the last tool selected
                self.last_tool_selected = int(tool_id)

            self.tool_row += 1

        # make the diameter column editable
        for row in range(self.tool_row):
            self.tools_table_exc.item(row, 1).setFlags(
                QtCore.Qt.ItemIsEditable | QtCore.Qt.ItemIsSelectable | QtCore.Qt.ItemIsEnabled)
            self.tools_table_exc.item(row, 2).setForeground(QtGui.QColor(0, 0, 0))
            self.tools_table_exc.item(row, 3).setForeground(QtGui.QColor(0, 0, 0))

        # add a last row with the Total number of drills
        # HACK: made the text on this cell '9999' such it will always be the one before last when sorting
        # it will have to have the foreground color (font color) white
        empty = QtWidgets.QTableWidgetItem('9998')
        empty.setForeground(QtGui.QColor(255, 255, 255))

        empty.setFlags(empty.flags() ^ QtCore.Qt.ItemIsEnabled)
        empty_b = QtWidgets.QTableWidgetItem('')
        empty_b.setFlags(empty_b.flags() ^ QtCore.Qt.ItemIsEnabled)

        label_tot_drill_count = QtWidgets.QTableWidgetItem(_('Total Drills'))
        tot_drill_count = QtWidgets.QTableWidgetItem('%d' % self.tot_drill_cnt)

        label_tot_drill_count.setFlags(label_tot_drill_count.flags() ^ QtCore.Qt.ItemIsEnabled)
        tot_drill_count.setFlags(tot_drill_count.flags() ^ QtCore.Qt.ItemIsEnabled)

        self.tools_table_exc.setItem(self.tool_row, 0, empty)
        self.tools_table_exc.setItem(self.tool_row, 1, label_tot_drill_count)
        self.tools_table_exc.setItem(self.tool_row, 2, tot_drill_count)  # Total number of drills
        self.tools_table_exc.setItem(self.tool_row, 3, empty_b)

        font = QtGui.QFont()
        font.setBold(True)
        font.setWeight(75)

        for k in [1, 2]:
            self.tools_table_exc.item(self.tool_row, k).setForeground(QtGui.QColor(127, 0, 255))
            self.tools_table_exc.item(self.tool_row, k).setFont(font)

        self.tool_row += 1

        # add a last row with the Total number of slots
        # HACK: made the text on this cell '9999' such it will always be the last when sorting
        # it will have to have the foreground color (font color) white
        empty_2 = QtWidgets.QTableWidgetItem('9999')
        empty_2.setForeground(QtGui.QColor(255, 255, 255))

        empty_2.setFlags(empty_2.flags() ^ QtCore.Qt.ItemIsEnabled)

        empty_3 = QtWidgets.QTableWidgetItem('')
        empty_3.setFlags(empty_3.flags() ^ QtCore.Qt.ItemIsEnabled)

        label_tot_slot_count = QtWidgets.QTableWidgetItem(_('Total Slots'))
        tot_slot_count = QtWidgets.QTableWidgetItem('%d' % self.tot_slot_cnt)
        label_tot_slot_count.setFlags(label_tot_slot_count.flags() ^ QtCore.Qt.ItemIsEnabled)
        tot_slot_count.setFlags(tot_slot_count.flags() ^ QtCore.Qt.ItemIsEnabled)

        self.tools_table_exc.setItem(self.tool_row, 0, empty_2)
        self.tools_table_exc.setItem(self.tool_row, 1, label_tot_slot_count)
        self.tools_table_exc.setItem(self.tool_row, 2, empty_3)
        self.tools_table_exc.setItem(self.tool_row, 3, tot_slot_count)  # Total number of slots

        for kl in [1, 2, 3]:
            self.tools_table_exc.item(self.tool_row, kl).setFont(font)
            self.tools_table_exc.item(self.tool_row, kl).setForeground(QtGui.QColor(0, 70, 255))

        # all the tools are selected by default
        self.tools_table_exc.selectColumn(0)
        #
        self.tools_table_exc.resizeColumnsToContents()
        self.tools_table_exc.resizeRowsToContents()

        vertical_header = self.tools_table_exc.verticalHeader()
        # vertical_header.setSectionResizeMode(QtWidgets.QHeaderView.ResizeToContents)
        vertical_header.hide()
        self.tools_table_exc.setVerticalScrollBarPolicy(QtCore.Qt.ScrollBarAlwaysOff)

        horizontal_header = self.tools_table_exc.horizontalHeader()
        horizontal_header.setSectionResizeMode(0, QtWidgets.QHeaderView.ResizeToContents)
        horizontal_header.setSectionResizeMode(1, QtWidgets.QHeaderView.Stretch)
        horizontal_header.setSectionResizeMode(2, QtWidgets.QHeaderView.ResizeToContents)
        horizontal_header.setSectionResizeMode(3, QtWidgets.QHeaderView.ResizeToContents)
        # horizontal_header.setStretchLastSection(True)

        # self.tools_table_exc.setSortingEnabled(True)
        # sort by tool diameter
        self.tools_table_exc.sortItems(1)

        # After sorting, to display also the number of drills in the right row we need to update self.initial_rows dict
        # with the new order. Of course the last 2 rows in the tool table are just for display therefore we don't
        # use them
        self.tool2tooldia.clear()
        for row in range(self.tools_table_exc.rowCount() - 2):
            tool = int(self.tools_table_exc.item(row, 0).text())
            diameter = float(self.tools_table_exc.item(row, 1).text())
            self.tool2tooldia[tool] = diameter

        self.tools_table_exc.setMinimumHeight(self.tools_table_exc.getHeight())
        self.tools_table_exc.setMaximumHeight(self.tools_table_exc.getHeight())

        # make sure no rows are selected so the user have to click the correct row, meaning selecting the correct tool
        self.tools_table_exc.clearSelection()

        # Remove anything else in the GUI Selected Tab
        self.app.ui.selected_scroll_area.takeWidget()
        # Put ourself in the GUI Selected Tab
        self.app.ui.selected_scroll_area.setWidget(self.exc_edit_widget)
        # Switch notebook to Selected page
        self.app.ui.notebook.setCurrentWidget(self.app.ui.selected_tab)

        # we reactivate the signals after the after the tool adding as we don't need to see the tool been populated
        self.tools_table_exc.itemChanged.connect(self.on_tool_edit)
        self.tools_table_exc.cellPressed.connect(self.on_row_selected)

    def on_tool_add(self, tooldia=None):
        self.is_modified = True
        if tooldia:
            tool_dia = tooldia
        else:
            try:
                tool_dia = float(self.addtool_entry.get_value())
            except ValueError:
                # try to convert comma to decimal point. if it's still not working error message and return
                try:
                    tool_dia = float(self.addtool_entry.get_value().replace(',', '.'))
                except ValueError:
                    self.app.inform.emit(_("[ERROR_NOTCL] Wrong value format entered, "
                                         "use a number.")
                                         )
                    return

        if tool_dia not in self.olddia_newdia:
            storage_elem = FlatCAMGeoEditor.make_storage()
            self.storage_dict[tool_dia] = storage_elem

            # self.olddia_newdia dict keeps the evidence on current tools diameters as keys and gets updated on values
            # each time a tool diameter is edited or added
            self.olddia_newdia[tool_dia] = tool_dia
        else:
            self.app.inform.emit(_("[WARNING_NOTCL] Tool already in the original or actual tool list.\n"
                                 "Save and reedit Excellon if you need to add this tool. ")
                                 )
            return

        # since we add a new tool, we update also the initial state of the tool_table through it's dictionary
        # we add a new entry in the tool2tooldia dict
        self.tool2tooldia[len(self.olddia_newdia)] = tool_dia

        self.app.inform.emit(_("[success] Added new tool with dia: {dia} {units}").format(dia=str(tool_dia),
                                                                                          units=str(self.units)))

        self.build_ui()

        # make a quick sort through the tool2tooldia dict so we find which row to select
        row_to_be_selected = None
        for key in sorted(self.tool2tooldia):
            if self.tool2tooldia[key] == tool_dia:
                row_to_be_selected = int(key) - 1
                self.last_tool_selected = int(key)
                break

        self.tools_table_exc.selectRow(row_to_be_selected)

    def on_tool_delete(self, dia=None):
        self.is_modified = True
        deleted_tool_dia_list = []

        try:
            if dia is None or dia is False:
                # deleted_tool_dia = float(self.tools_table_exc.item(self.tools_table_exc.currentRow(), 1).text())
                for index in self.tools_table_exc.selectionModel().selectedRows():
                    row = index.row()
                    deleted_tool_dia_list.append(float(self.tools_table_exc.item(row, 1).text()))
            else:
                if isinstance(dia, list):
                    for dd in dia:
                        deleted_tool_dia_list.append(float('%.4f' % dd))
                else:
                    deleted_tool_dia_list.append(float('%.4f' % dia))
        except:
            self.app.inform.emit(_("[WARNING_NOTCL] Select a tool in Tool Table"))
            return

        for deleted_tool_dia in deleted_tool_dia_list:

            # delete de tool offset
            self.exc_obj.tool_offset.pop(float(deleted_tool_dia), None)

            # delete the storage used for that tool
            storage_elem = FlatCAMGeoEditor.make_storage()
            self.storage_dict[deleted_tool_dia] = storage_elem
            self.storage_dict.pop(deleted_tool_dia, None)

            # I've added this flag_del variable because dictionary don't like
            # having keys deleted while iterating through them
            flag_del = []
            # self.points_edit.pop(deleted_tool_dia, None)
            for deleted_tool in self.tool2tooldia:
                if self.tool2tooldia[deleted_tool] == deleted_tool_dia:
                    flag_del.append(deleted_tool)

            if flag_del:
                for tool_to_be_deleted in flag_del:
                    # delete the tool
                    self.tool2tooldia.pop(tool_to_be_deleted, None)

                    # delete also the drills from points_edit dict just in case we add the tool again,
                    # we don't want to show the number of drills from before was deleter
                    self.points_edit[deleted_tool_dia] = []

            self.olddia_newdia.pop(deleted_tool_dia, None)

            self.app.inform.emit(_("[success] Deleted tool with dia: {del_dia} {units}").format(
                del_dia=str(deleted_tool_dia),
                units=str(self.units)))

        self.replot()
        # self.app.inform.emit("Could not delete selected tool")

        self.build_ui()

    def on_tool_edit(self, item_changed):

        # if connected, disconnect the signal from the slot on item_changed as it creates issues
        self.tools_table_exc.itemChanged.disconnect()
        self.tools_table_exc.cellPressed.disconnect()

        # self.tools_table_exc.selectionModel().currentChanged.disconnect()

        self.is_modified = True
        current_table_dia_edited = None

        if self.tools_table_exc.currentItem() is not None:
            try:
                current_table_dia_edited = float(self.tools_table_exc.currentItem().text())
            except ValueError as e:
                log.debug("FlatCAMExcEditor.on_tool_edit() --> %s" % str(e))
                self.tools_table_exc.setCurrentItem(None)
                return

        row_of_item_changed = self.tools_table_exc.currentRow()

        # rows start with 0, tools start with 1 so we adjust the value by 1
        key_in_tool2tooldia = row_of_item_changed + 1

        dia_changed = self.tool2tooldia[key_in_tool2tooldia]

        # tool diameter is not used so we create a new tool with the desired diameter
        if current_table_dia_edited not in self.olddia_newdia.values():
            # update the dict that holds as keys our initial diameters and as values the edited diameters
            self.olddia_newdia[dia_changed] = current_table_dia_edited
            # update the dict that holds tool_no as key and tool_dia as value
            self.tool2tooldia[key_in_tool2tooldia] = current_table_dia_edited

            # update the tool offset
            modified_offset = self.exc_obj.tool_offset.pop(dia_changed, None)
            if modified_offset is not None:
                self.exc_obj.tool_offset[current_table_dia_edited] = modified_offset

            self.replot()
        else:
            # tool diameter is already in use so we move the drills from the prior tool to the new tool
            factor = current_table_dia_edited / dia_changed
            geometry = []

            for shape_exc in self.storage_dict[dia_changed].get_objects():
                scaled_geo = MultiLineString(
                    [affinity.scale(subgeo, xfact=factor, yfact=factor, origin='center') for subgeo in shape_exc.geo]
                )
                geometry.append(DrawToolShape(scaled_geo))

                # add bogus drill points (for total count of drills)
                for k, v in self.olddia_newdia.items():
                    if v == current_table_dia_edited:
                        self.points_edit[k].append((0, 0))
                        break

            # search for the old dia that correspond to the new dia and add the drills in it's storage
            # everything will be sort out later, when the edited Excellon is updated
            for k, v in self.olddia_newdia.items():
                if v == current_table_dia_edited:
                    self.add_exc_shape(geometry, self.storage_dict[k])
                    break

            # delete the old tool from which we moved the drills
            self.on_tool_delete(dia=dia_changed)

            # delete the tool offset
            self.exc_obj.tool_offset.pop(dia_changed, None)

        # we reactivate the signals after the after the tool editing
        self.tools_table_exc.itemChanged.connect(self.on_tool_edit)
        self.tools_table_exc.cellPressed.connect(self.on_row_selected)

        # self.tools_table_exc.selectionModel().currentChanged.connect(self.on_row_selected)

    def on_name_activate(self):
        self.edited_obj_name = self.name_entry.get_value()

    def activate(self):
        # adjust the status of the menu entries related to the editor
        self.app.ui.menueditedit.setDisabled(True)
        self.app.ui.menueditok.setDisabled(False)
        # adjust the visibility of some of the canvas context menu
        self.app.ui.popmenu_edit.setVisible(False)
        self.app.ui.popmenu_save.setVisible(True)

        self.connect_canvas_event_handlers()

        # initialize working objects
        self.storage_dict = {}
        self.current_storage = []
        self.points_edit = {}
        self.sorted_diameters = []
        self.new_drills = []
        self.new_tools = {}
        self.new_slots = {}
        self.new_tool_offset = {}
        self.olddia_newdia = {}

        self.shapes.enabled = True
        self.tool_shape.enabled = True
        # self.app.app_cursor.enabled = True

        self.app.ui.snap_max_dist_entry.setEnabled(True)
        self.app.ui.corner_snap_btn.setEnabled(True)
        self.app.ui.snap_magnet.setVisible(True)
        self.app.ui.corner_snap_btn.setVisible(True)

        self.app.ui.exc_editor_menu.setDisabled(False)
        self.app.ui.exc_editor_menu.menuAction().setVisible(True)

        self.app.ui.update_obj_btn.setEnabled(True)
        self.app.ui.e_editor_cmenu.setEnabled(True)

        self.app.ui.exc_edit_toolbar.setDisabled(False)
        self.app.ui.exc_edit_toolbar.setVisible(True)
        # self.app.ui.snap_toolbar.setDisabled(False)

        # start with GRID toolbar activated
        if self.app.ui.grid_snap_btn.isChecked() is False:
            self.app.ui.grid_snap_btn.trigger()

        self.app.ui.popmenu_disable.setVisible(False)
        self.app.ui.cmenu_newmenu.menuAction().setVisible(False)
        self.app.ui.popmenu_properties.setVisible(False)
        self.app.ui.e_editor_cmenu.menuAction().setVisible(True)
        self.app.ui.g_editor_cmenu.menuAction().setVisible(False)
        self.app.ui.grb_editor_cmenu.menuAction().setVisible(False)

        # Tell the App that the editor is active
        self.editor_active = True

        # show the UI
        self.drills_frame.show()

    def deactivate(self):
        try:
            QtGui.QGuiApplication.restoreOverrideCursor()
        except:
            pass

        # adjust the status of the menu entries related to the editor
        self.app.ui.menueditedit.setDisabled(False)
        self.app.ui.menueditok.setDisabled(True)
        # adjust the visibility of some of the canvas context menu
        self.app.ui.popmenu_edit.setVisible(True)
        self.app.ui.popmenu_save.setVisible(False)

        self.disconnect_canvas_event_handlers()
        self.clear()
        self.app.ui.exc_edit_toolbar.setDisabled(True)

        settings = QSettings("Open Source", "FlatCAM")
        if settings.contains("layout"):
            layout = settings.value('layout', type=str)
            if layout == 'standard':
                # self.app.ui.exc_edit_toolbar.setVisible(False)

                self.app.ui.snap_max_dist_entry.setEnabled(False)
                self.app.ui.corner_snap_btn.setEnabled(False)
                self.app.ui.snap_magnet.setVisible(False)
                self.app.ui.corner_snap_btn.setVisible(False)
            elif layout == 'compact':
                # self.app.ui.exc_edit_toolbar.setVisible(True)

                self.app.ui.snap_max_dist_entry.setEnabled(False)
                self.app.ui.corner_snap_btn.setEnabled(False)
                self.app.ui.snap_magnet.setVisible(True)
                self.app.ui.corner_snap_btn.setVisible(True)
        else:
            # self.app.ui.exc_edit_toolbar.setVisible(False)

            self.app.ui.snap_max_dist_entry.setEnabled(False)
            self.app.ui.corner_snap_btn.setEnabled(False)
            self.app.ui.snap_magnet.setVisible(False)
            self.app.ui.corner_snap_btn.setVisible(False)

        # set the Editor Toolbar visibility to what was before entering in the Editor
        self.app.ui.exc_edit_toolbar.setVisible(False) if self.toolbar_old_state is False \
            else self.app.ui.exc_edit_toolbar.setVisible(True)

        # Disable visuals
        self.shapes.enabled = False
        self.tool_shape.enabled = False
        # self.app.app_cursor.enabled = False

        # Tell the app that the editor is no longer active
        self.editor_active = False

        self.app.ui.exc_editor_menu.setDisabled(True)
        self.app.ui.exc_editor_menu.menuAction().setVisible(False)

        self.app.ui.update_obj_btn.setEnabled(False)

        self.app.ui.popmenu_disable.setVisible(True)
        self.app.ui.cmenu_newmenu.menuAction().setVisible(True)
        self.app.ui.popmenu_properties.setVisible(True)
        self.app.ui.g_editor_cmenu.menuAction().setVisible(False)
        self.app.ui.e_editor_cmenu.menuAction().setVisible(False)
        self.app.ui.grb_editor_cmenu.menuAction().setVisible(False)

        # Show original geometry
        if self.exc_obj:
            self.exc_obj.visible = True

        # hide the UI
        self.drills_frame.hide()

    def connect_canvas_event_handlers(self):
        # ## Canvas events

        # first connect to new, then disconnect the old handlers
        # don't ask why but if there is nothing connected I've seen issues
        self.canvas.vis_connect('mouse_press', self.on_canvas_click)
        self.canvas.vis_connect('mouse_move', self.on_canvas_move)
        self.canvas.vis_connect('mouse_release', self.on_exc_click_release)

        # make sure that the shortcuts key and mouse events will no longer be linked to the methods from FlatCAMApp
        # but those from FlatCAMGeoEditor
        self.app.plotcanvas.vis_disconnect('mouse_press', self.app.on_mouse_click_over_plot)
        self.app.plotcanvas.vis_disconnect('mouse_move', self.app.on_mouse_move_over_plot)
        self.app.plotcanvas.vis_disconnect('mouse_release', self.app.on_mouse_click_release_over_plot)
        self.app.plotcanvas.vis_disconnect('mouse_double_click', self.app.on_double_click_over_plot)
        self.app.collection.view.clicked.disconnect()

        self.app.ui.popmenu_copy.triggered.disconnect()
        self.app.ui.popmenu_delete.triggered.disconnect()
        self.app.ui.popmenu_move.triggered.disconnect()

        self.app.ui.popmenu_copy.triggered.connect(self.exc_copy_drills)
        self.app.ui.popmenu_delete.triggered.connect(self.on_delete_btn)
        self.app.ui.popmenu_move.triggered.connect(self.exc_move_drills)

        # Excellon Editor
        self.app.ui.drill.triggered.connect(self.exc_add_drill)
        self.app.ui.drill_array.triggered.connect(self.exc_add_drill_array)

    def disconnect_canvas_event_handlers(self):
        # we restore the key and mouse control to FlatCAMApp method
        # first connect to new, then disconnect the old handlers
        # don't ask why but if there is nothing connected I've seen issues
        self.app.plotcanvas.vis_connect('mouse_press', self.app.on_mouse_click_over_plot)
        self.app.plotcanvas.vis_connect('mouse_move', self.app.on_mouse_move_over_plot)
        self.app.plotcanvas.vis_connect('mouse_release', self.app.on_mouse_click_release_over_plot)
        self.app.plotcanvas.vis_connect('mouse_double_click', self.app.on_double_click_over_plot)
        self.app.collection.view.clicked.connect(self.app.collection.on_mouse_down)

        self.canvas.vis_disconnect('mouse_press', self.on_canvas_click)
        self.canvas.vis_disconnect('mouse_move', self.on_canvas_move)
        self.canvas.vis_disconnect('mouse_release', self.on_exc_click_release)

        try:
            self.app.ui.popmenu_copy.triggered.disconnect(self.exc_copy_drills)
        except TypeError:
            pass

        try:
            self.app.ui.popmenu_delete.triggered.disconnect(self.on_delete_btn)
        except TypeError:
            pass

        try:
            self.app.ui.popmenu_move.triggered.disconnect(self.exc_move_drills)
        except TypeError:
            pass

        self.app.ui.popmenu_copy.triggered.connect(self.app.on_copy_object)
        self.app.ui.popmenu_delete.triggered.connect(self.app.on_delete)
        self.app.ui.popmenu_move.triggered.connect(self.app.obj_move)

        # Excellon Editor
        try:
            self.app.ui.drill.triggered.disconnect(self.exc_add_drill)
        except TypeError:
            pass

        try:
            self.app.ui.drill_array.triggered.disconnect(self.exc_add_drill_array)
        except TypeError:
            pass

    def clear(self):
        self.active_tool = None
        # self.shape_buffer = []
        self.selected = []

        self.points_edit = {}
        self.new_tools = {}
        self.new_drills = []

        # self.storage_dict = {}

        self.shapes.clear(update=True)
        self.tool_shape.clear(update=True)

        # self.storage = FlatCAMExcEditor.make_storage()
        self.replot()

    def edit_fcexcellon(self, exc_obj):
        """
        Imports the geometry from the given FlatCAM Excellon object
        into the editor.

        :param exc_obj: FlatCAMExcellon object
        :return: None
        """

        assert isinstance(exc_obj, Excellon), \
            "Expected an Excellon Object, got %s" % type(exc_obj)

        self.deactivate()
        self.activate()

        # Hide original geometry
        self.exc_obj = exc_obj
        exc_obj.visible = False

        # Set selection tolerance
        # DrawToolShape.tolerance = fc_excellon.drawing_tolerance * 10

        self.select_tool("drill_select")

        self.set_ui()

        # now that we hava data, create the GUI interface and add it to the Tool Tab
        self.build_ui(first_run=True)

        # we activate this after the initial build as we don't need to see the tool been populated
        self.tools_table_exc.itemChanged.connect(self.on_tool_edit)

        # build the geometry for each tool-diameter, each drill will be represented by a '+' symbol
        # and then add it to the storage elements (each storage elements is a member of a list
        for tool_dia in self.points_edit:
            storage_elem = FlatCAMGeoEditor.make_storage()
            for point in self.points_edit[tool_dia]:
                # make a '+' sign, the line length is the tool diameter
                start_hor_line = ((point.x - (tool_dia / 2)), point.y)
                stop_hor_line = ((point.x + (tool_dia / 2)), point.y)
                start_vert_line = (point.x, (point.y - (tool_dia / 2)))
                stop_vert_line = (point.x, (point.y + (tool_dia / 2)))
                shape_geo = MultiLineString([(start_hor_line, stop_hor_line), (start_vert_line, stop_vert_line)])
                if shape_geo is not None:
                    self.add_exc_shape(DrawToolShape(shape_geo), storage_elem)
            self.storage_dict[tool_dia] = storage_elem

        self.replot()

        # add a first tool in the Tool Table but only if the Excellon Object is empty
        if not self.tool2tooldia:
            self.on_tool_add(tooldia=1.00)

    def update_fcexcellon(self, exc_obj):
        """
        Create a new Excellon object that contain the edited content of the source Excellon object

        :param exc_obj: FlatCAMExcellon
        :return: None
        """

        # this dictionary will contain tooldia's as keys and a list of coordinates tuple as values
        # the values of this dict are coordinates of the holes (drills)
        edited_points = {}
        for storage_tooldia in self.storage_dict:
            for x in self.storage_dict[storage_tooldia].get_objects():

                # all x.geo in self.storage_dict[storage] are MultiLinestring objects
                # each MultiLineString is made out of Linestrings
                # select first Linestring object in the current MultiLineString
                first_linestring = x.geo[0]
                # get it's coordinates
                first_linestring_coords = first_linestring.coords
                x_coord = first_linestring_coords[0][0] + (float(first_linestring.length / 2))
                y_coord = first_linestring_coords[0][1]

                # create a tuple with the coordinates (x, y) and add it to the list that is the value of the
                # edited_points dictionary
                point = (x_coord, y_coord)
                if storage_tooldia not in edited_points:
                    edited_points[storage_tooldia] = [point]
                else:
                    edited_points[storage_tooldia].append(point)

        # recreate the drills and tools to be added to the new Excellon edited object
        # first, we look in the tool table if one of the tool diameters was changed then
        # append that a tuple formed by (old_dia, edited_dia) to a list
        changed_key = []
        for initial_dia in self.olddia_newdia:
            edited_dia = self.olddia_newdia[initial_dia]
            if edited_dia != initial_dia:
                for old_dia in edited_points:
                    if old_dia == initial_dia:
                        changed_key.append((old_dia, edited_dia))
            # if the initial_dia is not in edited_points it means it is a new tool with no drill points
            # (and we have to add it)
            # because in case we have drill points it will have to be already added in edited_points
            # if initial_dia not in edited_points.keys():
            #     edited_points[initial_dia] = []

        for el in changed_key:
            edited_points[el[1]] = edited_points.pop(el[0])

        # Let's sort the edited_points dictionary by keys (diameters) and store the result in a zipped list
        # ordered_edited_points is a ordered list of tuples;
        # element[0] of the tuple is the diameter and
        # element[1] of the tuple is a list of coordinates (a tuple themselves)
        ordered_edited_points = sorted(zip(edited_points.keys(), edited_points.values()))

        current_tool = 0
        for tool_dia in ordered_edited_points:
            current_tool += 1

            # create the self.tools for the new Excellon object (the one with edited content)
            name = str(current_tool)
            spec = {"C": float(tool_dia[0])}
            self.new_tools[name] = spec

            # add in self.tools the 'solid_geometry' key, the value (a list) is populated bellow
            self.new_tools[name]['solid_geometry'] = []

            # create the self.drills for the new Excellon object (the one with edited content)
            for point in tool_dia[1]:
                self.new_drills.append(
                    {
                        'point': Point(point),
                        'tool': str(current_tool)
                    }
                )
                # repopulate the 'solid_geometry' for each tool
                poly = Point(point).buffer(float(tool_dia[0]) / 2.0, int(int(exc_obj.geo_steps_per_circle) / 4))
                self.new_tools[name]['solid_geometry'].append(poly)

        if self.is_modified is True:
            if "_edit" in self.edited_obj_name:
                try:
                    idd = int(self.edited_obj_name[-1]) + 1
                    self.edited_obj_name = self.edited_obj_name[:-1] + str(idd)
                except ValueError:
                    self.edited_obj_name += "_1"
            else:
                self.edited_obj_name += "_edit"

        self.app.worker_task.emit({'fcn': self.new_edited_excellon,
                                   'params': [self.edited_obj_name]})

        if self.exc_obj.slots:
            self.new_slots = self.exc_obj.slots

        self.new_tool_offset = self.exc_obj.tool_offset

        # reset the tool table
        self.tools_table_exc.clear()
        self.tools_table_exc.setHorizontalHeaderLabels(['#', _('Diameter'), 'D', 'S'])
        self.last_tool_selected = None

        # delete the edited Excellon object which will be replaced by a new one having the edited content of the first
        self.app.collection.set_active(self.exc_obj.options['name'])
        self.app.collection.delete_active()

        # restore GUI to the Selected TAB
        # Remove anything else in the GUI
        self.app.ui.tool_scroll_area.takeWidget()
        # Switch notebook to Selected page
        self.app.ui.notebook.setCurrentWidget(self.app.ui.selected_tab)

    def update_options(self, obj):
        try:
            if not obj.options:
                obj.options = {}
                obj.options['xmin'] = 0
                obj.options['ymin'] = 0
                obj.options['xmax'] = 0
                obj.options['ymax'] = 0
                return True
            else:
                return False
        except AttributeError:
            obj.options = {}
            return True

    def new_edited_excellon(self, outname):
        """
        Creates a new Excellon object for the edited Excellon. Thread-safe.

        :param outname: Name of the resulting object. None causes the
            name to be that of the file.
        :type outname: str
        :return: None
        """

        self.app.log.debug("Update the Excellon object with edited content. Source is %s" %
                           self.exc_obj.options['name'])

        # How the object should be initialized
        def obj_init(excellon_obj, app_obj):
            # self.progress.emit(20)
            excellon_obj.drills = self.new_drills
            excellon_obj.tools = self.new_tools
            excellon_obj.slots = self.new_slots
            excellon_obj.tool_offset = self.new_tool_offset
            excellon_obj.options['name'] = outname

            try:
                excellon_obj.create_geometry()
            except KeyError:
                self.app.inform.emit(
                   _("[ERROR_NOTCL] There are no Tools definitions in the file. Aborting Excellon creation.")
                )
            except:
                msg = _("[ERROR] An internal error has ocurred. See shell.\n")
                msg += traceback.format_exc()
                app_obj.inform.emit(msg)
                raise
                # raise

        with self.app.proc_container.new(_("Creating Excellon.")):

            try:
                self.app.new_object("excellon", outname, obj_init)
            except Exception as e:
                log.error("Error on object creation: %s" % str(e))
                self.app.progress.emit(100)
                return

            self.app.inform.emit(_("[success] Excellon editing finished."))
            # self.progress.emit(100)

    def on_tool_select(self, tool):
        """
        Behavior of the toolbar. Tool initialization.

        :rtype : None
        """
        current_tool = tool

        self.app.log.debug("on_tool_select('%s')" % tool)

        if self.last_tool_selected is None and current_tool is not 'drill_select':
            # self.draw_app.select_tool('drill_select')
            self.complete = True
            current_tool = 'drill_select'
            self.app.inform.emit(_("[WARNING_NOTCL] Cancelled. There is no Tool/Drill selected"))

        # This is to make the group behave as radio group
        if current_tool in self.tools_exc:
            if self.tools_exc[current_tool]["button"].isChecked():
                self.app.log.debug("%s is checked." % current_tool)
                for t in self.tools_exc:
                    if t != current_tool:
                        self.tools_exc[t]["button"].setChecked(False)

                # this is where the Editor toolbar classes (button's) are instantiated
                self.active_tool = self.tools_exc[current_tool]["constructor"](self)
                # self.app.inform.emit(self.active_tool.start_msg)
            else:
                self.app.log.debug("%s is NOT checked." % current_tool)
                for t in self.tools_exc:
                    self.tools_exc[t]["button"].setChecked(False)

                self.select_tool('drill_select')
                self.active_tool = FCDrillSelect(self)

    def on_row_selected(self, row, col):
        if col == 0:
            key_modifier = QtWidgets.QApplication.keyboardModifiers()
            if self.app.defaults["global_mselect_key"] == 'Control':
                modifier_to_use = Qt.ControlModifier
            else:
                modifier_to_use = Qt.ShiftModifier

            if key_modifier == modifier_to_use:
                pass
            else:
                self.selected = []

            try:
                selected_dia = self.tool2tooldia[self.tools_table_exc.currentRow() + 1]
                self.last_tool_selected = int(self.tools_table_exc.currentRow()) + 1
                for obj in self.storage_dict[selected_dia].get_objects():
                    self.selected.append(obj)
            except Exception as e:
                self.app.log.debug(str(e))

            self.replot()

    def toolbar_tool_toggle(self, key):
        self.options[key] = self.sender().isChecked()
        if self.options[key] is True:
            return 1
        else:
            return 0

    def on_canvas_click(self, event):
        """
        event.x and .y have canvas coordinates
        event.xdata and .ydata have plot coordinates

        :param event: Event object dispatched by VisPy
        :return: None
        """

        self.pos = self.canvas.vispy_canvas.translate_coords(event.pos)

        if self.app.grid_status():
            self.pos  = self.app.geo_editor.snap(self.pos[0], self.pos[1])
            self.app.app_cursor.enabled = True
            # Update cursor
            self.app.app_cursor.set_data(np.asarray([(self.pos[0], self.pos[1])]), symbol='++', edge_color='black',
                                         size=20)
        else:
            self.pos = (self.pos[0], self.pos[1])
            self.app.app_cursor.enabled = False

        if event.button is 1:
            self.app.ui.rel_position_label.setText("<b>Dx</b>: %.4f&nbsp;&nbsp;  <b>Dy</b>: "
                                                   "%.4f&nbsp;&nbsp;&nbsp;&nbsp;" % (0, 0))
            self.pos = self.canvas.vispy_canvas.translate_coords(event.pos)

            # Selection with left mouse button
            if self.active_tool is not None and event.button is 1:
                # Dispatch event to active_tool
                # msg = self.active_tool.click(self.app.geo_editor.snap(event.xdata, event.ydata))
                self.active_tool.click(self.app.geo_editor.snap(self.pos[0], self.pos[1]))

                # If it is a shape generating tool
                if isinstance(self.active_tool, FCShapeTool) and self.active_tool.complete:
                    if self.current_storage is not None:
                        self.on_exc_shape_complete(self.current_storage)
                        self.build_ui()
                    # MS: always return to the Select Tool if modifier key is not pressed
                    # else return to the current tool
                    key_modifier = QtWidgets.QApplication.keyboardModifiers()
                    if self.app.defaults["global_mselect_key"] == 'Control':
                        modifier_to_use = Qt.ControlModifier
                    else:
                        modifier_to_use = Qt.ShiftModifier
                    # if modifier key is pressed then we add to the selected list the current shape but if it's already
                    # in the selected list, we removed it. Therefore first click selects, second deselects.
                    if key_modifier == modifier_to_use:
                        self.select_tool(self.active_tool.name)
                    else:
                        # return to Select tool but not for FCPad
                        if isinstance(self.active_tool, FCDrillAdd):
                            self.select_tool(self.active_tool.name)
                        else:
                            self.select_tool("drill_select")
                        return

                if isinstance(self.active_tool, FCDrillSelect):
                    # self.app.log.debug("Replotting after click.")
                    self.replot()
            else:
                self.app.log.debug("No active tool to respond to click!")

    def on_exc_shape_complete(self, storage):
        self.app.log.debug("on_shape_complete()")

        # Add shape
        if type(storage) is list:
            for item_storage in storage:
                self.add_exc_shape(self.active_tool.geometry, item_storage)
        else:
            self.add_exc_shape(self.active_tool.geometry, storage)

        # Remove any utility shapes
        self.delete_utility_geometry()
        self.tool_shape.clear(update=True)

        # Replot and reset tool.
        self.replot()
        # self.active_tool = type(self.active_tool)(self)

    def add_exc_shape(self, shape, storage):
        """
        Adds a shape to the shape storage.

        :param shape: Shape to be added.
        :type shape: DrawToolShape
        :param storage: object where to store the shapes
        :return: None
        """
        # List of DrawToolShape?
        if isinstance(shape, list):
            for subshape in shape:
                self.add_exc_shape(subshape, storage)
            return

        assert isinstance(shape, DrawToolShape), \
            "Expected a DrawToolShape, got %s" % str(type(shape))

        assert shape.geo is not None, \
            "Shape object has empty geometry (None)"

        assert (isinstance(shape.geo, list) and len(shape.geo) > 0) or not isinstance(shape.geo, list), \
            "Shape objects has empty geometry ([])"

        if isinstance(shape, DrawToolUtilityShape):
            self.utility.append(shape)
        else:
            storage.insert(shape)  # TODO: Check performance

    def add_shape(self, shape):
        """
        Adds a shape to the shape storage.

        :param shape: Shape to be added.
        :type shape: DrawToolShape
        :return: None
        """

        # List of DrawToolShape?
        if isinstance(shape, list):
            for subshape in shape:
                self.add_shape(subshape)
            return

        assert isinstance(shape, DrawToolShape), \
            "Expected a DrawToolShape, got %s" % type(shape)

        assert shape.geo is not None, \
            "Shape object has empty geometry (None)"

        assert (isinstance(shape.geo, list) and len(shape.geo) > 0) or not isinstance(shape.geo, list), \
            "Shape objects has empty geometry ([])"

        if isinstance(shape, DrawToolUtilityShape):
            self.utility.append(shape)
        else:
            self.storage.insert(shape)  # TODO: Check performance

    def on_exc_click_release(self, event):
        self.modifiers = QtWidgets.QApplication.keyboardModifiers()

        pos_canvas = self.canvas.vispy_canvas.translate_coords(event.pos)
        if self.app.grid_status():
            pos = self.app.geo_editor.snap(pos_canvas[0], pos_canvas[1])
        else:
            pos = (pos_canvas[0], pos_canvas[1])

        # if the released mouse button was RMB then test if it was a panning motion or not, if not it was a context
        # canvas menu
        try:
            if event.button == 2:  # right click
                if self.app.ui.popMenu.mouse_is_panning is False:
                    try:
                        QtGui.QGuiApplication.restoreOverrideCursor()
                    except:
                        pass
                    if self.active_tool.complete is False and not isinstance(self.active_tool, FCDrillSelect):
                        self.active_tool.complete = True
                        self.in_action = False
                        self.delete_utility_geometry()
                        self.app.inform.emit(_("[success] Done."))
                        self.select_tool('drill_select')
                    else:
                        if isinstance(self.active_tool, FCDrillAdd):
                            self.active_tool.complete = True
                            self.in_action = False
                            self.delete_utility_geometry()
                            self.app.inform.emit(_("[success] Done."))
                            self.select_tool('drill_select')

                        self.app.cursor = QtGui.QCursor()
                        self.app.populate_cmenu_grids()
                        self.app.ui.popMenu.popup(self.app.cursor.pos())

        except Exception as e:
            log.warning("Error: %s" % str(e))
            raise

        # if the released mouse button was LMB then test if we had a right-to-left selection or a left-to-right
        # selection and then select a type of selection ("enclosing" or "touching")
        try:
            if event.button == 1:  # left click
                if self.app.selection_type is not None:
                    self.draw_selection_area_handler(self.pos, pos, self.app.selection_type)
                    self.app.selection_type = None

                elif isinstance(self.active_tool, FCDrillSelect):
                    self.active_tool.click_release((self.pos[0], self.pos[1]))

                    # if there are selected objects then plot them
                    if self.selected:
                        self.replot()
        except Exception as e:
            log.warning("Error: %s" % str(e))
            raise

    def draw_selection_area_handler(self, start_pos, end_pos, sel_type):
        """
        :param start_pos: mouse position when the selection LMB click was done
        :param end_pos: mouse position when the left mouse button is released
        :param sel_type: if True it's a left to right selection (enclosure), if False it's a 'touch' selection
        :return:
        """
        poly_selection = Polygon([start_pos, (end_pos[0], start_pos[1]), end_pos, (start_pos[0], end_pos[1])])

        self.app.delete_selection_shape()
        for storage in self.storage_dict:
            for obj in self.storage_dict[storage].get_objects():
                if (sel_type is True and poly_selection.contains(obj.geo)) or \
                        (sel_type is False and poly_selection.intersects(obj.geo)):
                    if self.key == self.app.defaults["global_mselect_key"]:
                        if obj in self.selected:
                            self.selected.remove(obj)
                        else:
                            # add the object to the selected shapes
                            self.selected.append(obj)
                    else:
                        self.selected.append(obj)

        try:
            self.tools_table_exc.cellPressed.disconnect()
        except:
            pass
        # select the diameter of the selected shape in the tool table
        self.tools_table_exc.setSelectionMode(QtWidgets.QAbstractItemView.MultiSelection)
        for storage in self.storage_dict:
            for shape_s in self.selected:
                if shape_s in self.storage_dict[storage].get_objects():
                    for key in self.tool2tooldia:
                        if self.tool2tooldia[key] == storage:
                            item = self.tools_table_exc.item((key - 1), 1)
                            self.tools_table_exc.setCurrentItem(item)
                            self.last_tool_selected = int(key)

        self.tools_table_exc.setSelectionMode(QtWidgets.QAbstractItemView.ExtendedSelection)

        self.tools_table_exc.cellPressed.connect(self.on_row_selected)
        self.replot()

    def on_canvas_move(self, event):
        """
        Called on 'mouse_move' event

        event.pos have canvas screen coordinates

        :param event: Event object dispatched by VisPy SceneCavas
        :return: None
        """

        pos = self.canvas.vispy_canvas.translate_coords(event.pos)
        event.xdata, event.ydata = pos[0], pos[1]

        self.x = event.xdata
        self.y = event.ydata

        self.app.ui.popMenu.mouse_is_panning = False

        # if the RMB is clicked and mouse is moving over plot then 'panning_action' is True
        if event.button == 2 and event.is_dragging == 1:
            self.app.ui.popMenu.mouse_is_panning = True
            return

        try:
            x = float(event.xdata)
            y = float(event.ydata)
        except TypeError:
            return

        if self.active_tool is None:
            return

        # ## Snap coordinates
        if self.app.grid_status():
            x, y = self.app.geo_editor.snap(x, y)
            self.app.app_cursor.enabled = True
            # Update cursor
            self.app.app_cursor.set_data(np.asarray([(x, y)]), symbol='++', edge_color='black', size=20)
        else:
            self.app.app_cursor.enabled = False

        self.snap_x = x
        self.snap_y = y

        # update the position label in the infobar since the APP mouse event handlers are disconnected
        self.app.ui.position_label.setText("&nbsp;&nbsp;&nbsp;&nbsp;<b>X</b>: %.4f&nbsp;&nbsp;   "
                                           "<b>Y</b>: %.4f" % (x, y))

        if self.pos is None:
            self.pos = (0, 0)
        dx = x - self.pos[0]
        dy = y - self.pos[1]

        # update the reference position label in the infobar since the APP mouse event handlers are disconnected
        self.app.ui.rel_position_label.setText("<b>Dx</b>: %.4f&nbsp;&nbsp;  <b>Dy</b>: "
                                               "%.4f&nbsp;&nbsp;&nbsp;&nbsp;" % (dx, dy))

        # ## Utility geometry (animated)
        geo = self.active_tool.utility_geometry(data=(x, y))

        if isinstance(geo, DrawToolShape) and geo.geo is not None:
            # Remove any previous utility shape
            self.tool_shape.clear(update=True)
            self.draw_utility_geometry(geo=geo)

        # ## Selection area on canvas section # ##
        if event.is_dragging == 1 and event.button == 1:
            # I make an exception for FCDrillAdd and FCDrillArray because clicking and dragging while making regions
            # can create strange issues
            if isinstance(self.active_tool, FCDrillAdd) or isinstance(self.active_tool, FCDrillArray):
                pass
            else:
                dx = pos[0] - self.pos[0]
                self.app.delete_selection_shape()
                if dx < 0:
                    self.app.draw_moving_selection_shape((self.pos[0], self.pos[1]), (x, y),
                                                         color=self.app.defaults["global_alt_sel_line"],
                                                         face_color=self.app.defaults['global_alt_sel_fill'])
                    self.app.selection_type = False
                else:
                    self.app.draw_moving_selection_shape((self.pos[0], self.pos[1]), (x, y))
                    self.app.selection_type = True
        else:
            self.app.selection_type = None

        # Update cursor
        self.app.app_cursor.set_data(np.asarray([(x, y)]), symbol='++', edge_color='black', size=20)

    def on_canvas_key_release(self, event):
        self.key = None

    def draw_utility_geometry(self, geo):
        # Add the new utility shape
        try:
            # this case is for the Font Parse
            for el in list(geo.geo):
                if type(el) == MultiPolygon:
                    for poly in el:
                        self.tool_shape.add(
                            shape=poly,
                            color=(self.app.defaults["global_draw_color"] + '80'),
                            update=False,
                            layer=0,
                            tolerance=None
                        )
                elif type(el) == MultiLineString:
                    for linestring in el:
                        self.tool_shape.add(
                            shape=linestring,
                            color=(self.app.defaults["global_draw_color"] + '80'),
                            update=False,
                            layer=0,
                            tolerance=None
                        )
                else:
                    self.tool_shape.add(
                        shape=el,
                        color=(self.app.defaults["global_draw_color"] + '80'),
                        update=False,
                        layer=0,
                        tolerance=None
                    )
        except TypeError:
            self.tool_shape.add(
                shape=geo.geo, color=(self.app.defaults["global_draw_color"] + '80'),
                update=False, layer=0, tolerance=None)
        self.tool_shape.redraw()

    def replot(self):
        self.plot_all()

    def plot_all(self):
        """
        Plots all shapes in the editor.

        :return: None
        :rtype: None
        """
        # self.app.log.debug("plot_all()")
        self.shapes.clear(update=True)

        for storage in self.storage_dict:
            for shape_plus in self.storage_dict[storage].get_objects():
                if shape_plus.geo is None:
                    continue

                if shape_plus in self.selected:
                    self.plot_shape(geometry=shape_plus.geo, color=self.app.defaults['global_sel_draw_color'],
                                    linewidth=2)
                    continue
                self.plot_shape(geometry=shape_plus.geo, color=self.app.defaults['global_draw_color'])

        # for shape in self.storage.get_objects():
        #     if shape.geo is None:  # TODO: This shouldn't have happened
        #         continue
        #
        #     if shape in self.selected:
        #         self.plot_shape(geometry=shape.geo, color=self.app.defaults['global_sel_draw_color'], linewidth=2)
        #         continue
        #
        #     self.plot_shape(geometry=shape.geo, color=self.app.defaults['global_draw_color'])

        for shape_form in self.utility:
            self.plot_shape(geometry=shape_form.geo, linewidth=1)
            continue

        self.shapes.redraw()

    def plot_shape(self, geometry=None, color='black', linewidth=1):
        """
        Plots a geometric object or list of objects without rendering. Plotted objects
        are returned as a list. This allows for efficient/animated rendering.

        :param geometry: Geometry to be plotted (Any Shapely.geom kind or list of such)
        :param color: Shape color
        :param linewidth: Width of lines in # of pixels.
        :return: List of plotted elements.
        """
        plot_elements = []

        if geometry is None:
            geometry = self.active_tool.geometry

        try:
            for geo in geometry:
                plot_elements += self.plot_shape(geometry=geo, color=color, linewidth=linewidth)

        # ## Non-iterable
        except TypeError:
            # ## DrawToolShape
            if isinstance(geometry, DrawToolShape):
                plot_elements += self.plot_shape(geometry=geometry.geo, color=color, linewidth=linewidth)

            # ## Polygon: Descend into exterior and each interior.
            if type(geometry) == Polygon:
                plot_elements += self.plot_shape(geometry=geometry.exterior, color=color, linewidth=linewidth)
                plot_elements += self.plot_shape(geometry=geometry.interiors, color=color, linewidth=linewidth)

            if type(geometry) == LineString or type(geometry) == LinearRing:
                plot_elements.append(self.shapes.add(shape=geometry, color=color, layer=0))

            if type(geometry) == Point:
                pass

        return plot_elements

    def on_shape_complete(self):
        self.app.log.debug("on_shape_complete()")

        # Add shape
        self.add_shape(self.active_tool.geometry)

        # Remove any utility shapes
        self.delete_utility_geometry()
        self.tool_shape.clear(update=True)

        # Replot and reset tool.
        self.replot()
        # self.active_tool = type(self.active_tool)(self)

    def get_selected(self):
        """
        Returns list of shapes that are selected in the editor.

        :return: List of shapes.
        """
        # return [shape for shape in self.shape_buffer if shape["selected"]]
        return self.selected

    def delete_selected(self):
        temp_ref = [s for s in self.selected]
        for shape_sel in temp_ref:
            self.delete_shape(shape_sel)

        self.selected = []
        self.build_ui()
        self.app.inform.emit(_("[success] Done. Drill(s) deleted."))

    def delete_shape(self, del_shape):
        self.is_modified = True

        if del_shape in self.utility:
            self.utility.remove(del_shape)
            return

        for storage in self.storage_dict:
            # try:
            #     self.storage_dict[storage].remove(shape)
            # except:
            #     pass
            if del_shape in self.storage_dict[storage].get_objects():
                self.storage_dict[storage].remove(del_shape)
                # a hack to make the tool_table display less drills per diameter
                # self.points_edit it's only useful first time when we load the data into the storage
                # but is still used as referecen when building tool_table in self.build_ui()
                # the number of drills displayed in column 2 is just a len(self.points_edit) therefore
                # deleting self.points_edit elements (doesn't matter who but just the number) solved the display issue.
                del self.points_edit[storage][0]

        if del_shape in self.selected:
            self.selected.remove(del_shape)  # TODO: Check performance

    def delete_utility_geometry(self):
        for_deletion = [util_shape for util_shape in self.utility]
        for util_shape in for_deletion:
            self.delete_shape(util_shape)

        self.tool_shape.clear(update=True)
        self.tool_shape.redraw()

    def on_delete_btn(self):
        self.delete_selected()
        self.replot()

    def select_tool(self, toolname):
        """
        Selects a drawing tool. Impacts the object and GUI.

        :param toolname: Name of the tool.
        :return: None
        """
        self.tools_exc[toolname]["button"].setChecked(True)
        self.on_tool_select(toolname)

    def set_selected(self, sel_shape):

        # Remove and add to the end.
        if sel_shape in self.selected:
            self.selected.remove(sel_shape)

        self.selected.append(sel_shape)

    def set_unselected(self, unsel_shape):
        if unsel_shape in self.selected:
            self.selected.remove(unsel_shape)

    def on_array_type_combo(self):
        if self.array_type_combo.currentIndex() == 0:
            self.array_circular_frame.hide()
            self.array_linear_frame.show()
        else:
            self.delete_utility_geometry()
            self.array_circular_frame.show()
            self.array_linear_frame.hide()
            self.app.inform.emit(_("Click on the circular array Center position"))

    def on_linear_angle_radio(self):
        val = self.drill_axis_radio.get_value()
        if val == 'A':
            self.linear_angle_spinner.show()
            self.linear_angle_label.show()
        else:
            self.linear_angle_spinner.hide()
            self.linear_angle_label.hide()

    def exc_add_drill(self):
        self.select_tool('drill_add')
        return

    def exc_add_drill_array(self):
        self.select_tool('drill_array')
        return

    def exc_resize_drills(self):
        self.select_tool('drill_resize')
        return

    def exc_copy_drills(self):
        self.select_tool('drill_copy')
        return

    def exc_move_drills(self):
        self.select_tool('drill_move')
        return

# EOF