FlatCAM/locale/en/LC_MESSAGES/strings.po

# SOME DESCRIPTIVE TITLE.
# Copyright (C) YEAR ORGANIZATION
# FIRST AUTHOR <EMAIL@ADDRESS>, YEAR.
#
msgid ""
msgstr ""
"Project-Id-Version: \n"
"POT-Creation-Date: 2019-05-20 01:44+0300\n"
"PO-Revision-Date: 2019-05-20 01:46+0300\n"
"Last-Translator: \n"
"Language-Team: \n"
"Language: en\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Generated-By: pygettext.py 1.5\n"
"X-Generator: Poedit 2.2.1\n"
"Plural-Forms: nplurals=2; plural=(n != 1);\n"
"X-Poedit-Basepath: ../../..\n"
"X-Poedit-SearchPath-0: .\n"
"X-Poedit-SearchPathExcluded-0: build\n"
"X-Poedit-SearchPathExcluded-1: doc\n"
"X-Poedit-SearchPathExcluded-2: tests\n"

#: FlatCAMApp.py:898
msgid "[ERROR] Could not find the Language files. The App strings are missing."
msgstr ""
"[ERROR] Could not find the Language files. The App strings are missing."

#: FlatCAMApp.py:1962 ObjectCollection.py:80 flatcamTools/ToolImage.py:213
#: flatcamTools/ToolPcbWizard.py:299 flatcamTools/ToolPcbWizard.py:322
msgid "Open cancelled."
msgstr "Open cancelled."

#: FlatCAMApp.py:1976
msgid "Open Config file failed."
msgstr "Open Config file failed."

#: FlatCAMApp.py:1990
msgid "Open Script file failed."
msgstr "Open Script file failed."

#: FlatCAMApp.py:2181
msgid "[WARNING_NOTCL] Select a Geometry, Gerber or Excellon Object to edit."
msgstr "[WARNING_NOTCL] Select a Geometry, Gerber or Excellon Object to edit."

#: FlatCAMApp.py:2191
msgid ""
"[WARNING_NOTCL] Simultanoeus editing of tools geometry in a MultiGeo "
"Geometry is not possible.\n"
"Edit only one geometry at a time."
msgstr ""
"[WARNING_NOTCL] Simultanoeus editing of tools geometry in a MultiGeo "
"Geometry is not possible.\n"
"Edit only one geometry at a time."

#: FlatCAMApp.py:2235
msgid "[WARNING_NOTCL] Editor is activated ..."
msgstr "[WARNING_NOTCL] Editor is activated ..."

#: FlatCAMApp.py:2254
msgid "Do you want to save the edited object?"
msgstr "Do you want to save the edited object?"

#: FlatCAMApp.py:2255 flatcamGUI/FlatCAMGUI.py:1618
msgid "Close Editor"
msgstr "Close Editor"

#: FlatCAMApp.py:2258 FlatCAMApp.py:3349 FlatCAMApp.py:5799
#: FlatCAMTranslation.py:89 flatcamGUI/FlatCAMGUI.py:3726
msgid "Yes"
msgstr "Yes"

#: FlatCAMApp.py:2259 FlatCAMApp.py:3350 FlatCAMApp.py:5800
#: FlatCAMTranslation.py:90 flatcamGUI/FlatCAMGUI.py:3727
msgid "No"
msgstr "No"

#: FlatCAMApp.py:2260 FlatCAMApp.py:3351 FlatCAMApp.py:3683 FlatCAMApp.py:5801
msgid "Cancel"
msgstr "Cancel"

#: FlatCAMApp.py:2287
msgid "[WARNING] Object empty after edit."
msgstr "[WARNING] Object empty after edit."

#: FlatCAMApp.py:2309 FlatCAMApp.py:2328 FlatCAMApp.py:2340
msgid "[WARNING_NOTCL] Select a Gerber, Geometry or Excellon Object to update."
msgstr ""
"[WARNING_NOTCL] Select a Gerber, Geometry or Excellon Object to update."

#: FlatCAMApp.py:2312
#, python-format
msgid "[selected] %s is updated, returning to App..."
msgstr "[selected] %s is updated, returning to App..."

#: FlatCAMApp.py:2677
msgid "[ERROR] Could not load defaults file."
msgstr "[ERROR] Could not load defaults file."

#: FlatCAMApp.py:2689
msgid "[ERROR] Failed to parse defaults file."
msgstr "[ERROR] Failed to parse defaults file."

#: FlatCAMApp.py:2710 FlatCAMApp.py:2713
msgid "Import FlatCAM Preferences"
msgstr "Import FlatCAM Preferences"

#: FlatCAMApp.py:2718
msgid "[WARNING_NOTCL] FlatCAM preferences import cancelled."
msgstr "[WARNING_NOTCL] FlatCAM preferences import cancelled."

#: FlatCAMApp.py:2726 FlatCAMApp.py:2773 FlatCAMApp.py:3228
msgid "[ERROR_NOTCL] Could not load defaults file."
msgstr "[ERROR_NOTCL] Could not load defaults file."

#: FlatCAMApp.py:2734 FlatCAMApp.py:3237
msgid "[ERROR_NOTCL] Failed to parse defaults file."
msgstr "[ERROR_NOTCL] Failed to parse defaults file."

#: FlatCAMApp.py:2737
#, python-format
msgid "[success] Imported Defaults from %s"
msgstr "[success] Imported Defaults from %s"

#: FlatCAMApp.py:2747 FlatCAMApp.py:2751
msgid "Export FlatCAM Preferences"
msgstr "Export FlatCAM Preferences"

#: FlatCAMApp.py:2757
msgid "[WARNING_NOTCL] FlatCAM preferences export cancelled."
msgstr "[WARNING_NOTCL] FlatCAM preferences export cancelled."

#: FlatCAMApp.py:2792 FlatCAMApp.py:3282
msgid "[ERROR_NOTCL] Failed to write defaults to file."
msgstr "[ERROR_NOTCL] Failed to write defaults to file."

#: FlatCAMApp.py:2845
msgid "[ERROR_NOTCL] Failed to open recent files file for writing."
msgstr "[ERROR_NOTCL] Failed to open recent files file for writing."

#: FlatCAMApp.py:2930 camlib.py:4453
msgid "[ERROR_NOTCL] An internal error has ocurred. See shell.\n"
msgstr "[ERROR_NOTCL] An internal error has ocurred. See shell.\n"

#: FlatCAMApp.py:2931
#, python-brace-format
msgid ""
"Object ({kind}) failed because: {error} \n"
"\n"
msgstr ""
"Object ({kind}) failed because: {error} \n"
"\n"

#: FlatCAMApp.py:2951
msgid "Converting units to "
msgstr "Converting units to "

#: FlatCAMApp.py:3030 FlatCAMApp.py:3033 FlatCAMApp.py:3036 FlatCAMApp.py:3039
#, python-brace-format
msgid ""
"[selected] {kind} created/selected: <span style=\"color:{color};\">{name}</"
"span>"
msgstr ""
"[selected] {kind} created/selected: <span style=\"color:{color};\">{name}</"
"span>"

#: FlatCAMApp.py:3133
#, python-brace-format
msgid ""
"<font size=8><B>FlatCAM</B></font><BR>Version {version} {beta} ({date}) - "
"{arch} <BR><BR>2D Computer-Aided Printed Circuit Board<BR>Manufacturing."
"<BR><BR>(c) 2014-2019 <B>Juan Pablo Caram</B><BR><BR><B> Main Contributors:</"
"B><BR>Denis Hayrullin<BR>Kamil Sopko<BR>Marius Stanciu<BR>Matthieu "
"Berthomé<BR>and many others found <a href = \"https://bitbucket.org/jpcgt/"
"flatcam/pull-requests/?state=MERGED\">here.</a><BR><BR>Development is done "
"<a href = \"https://bitbucket.org/jpcgt/flatcam/src/Beta/\">here.</"
"a><BR>DOWNLOAD area <a href = \"https://bitbucket.org/jpcgt/flatcam/"
"downloads/\">here.</a><BR>"
msgstr ""
"<font size=8><B>FlatCAM</B></font><BR>Version {version} {beta} ({date}) - "
"{arch} <BR><BR>2D Computer-Aided Printed Circuit Board<BR>Manufacturing."
"<BR><BR>(c) 2014-2019 <B>Juan Pablo Caram</B><BR><BR><B> Main Contributors:</"
"B><BR>Denis Hayrullin<BR>Kamil Sopko<BR>Marius Stanciu<BR>Matthieu "
"Berthomé<BR>and many others found <a href = \"https://bitbucket.org/jpcgt/"
"flatcam/pull-requests/?state=MERGED\">here.</a><BR><BR>Development is done "
"<a href = \"https://bitbucket.org/jpcgt/flatcam/src/Beta/\">here.</"
"a><BR>DOWNLOAD area <a href = \"https://bitbucket.org/jpcgt/flatcam/"
"downloads/\">here.</a><BR>"

#: FlatCAMApp.py:3286
msgid "[success] Defaults saved."
msgstr "[success] Defaults saved."

#: FlatCAMApp.py:3307
msgid "[ERROR_NOTCL] Could not load factory defaults file."
msgstr "[ERROR_NOTCL] Could not load factory defaults file."

#: FlatCAMApp.py:3316
msgid "[ERROR_NOTCL] Failed to parse factory defaults file."
msgstr "[ERROR_NOTCL] Failed to parse factory defaults file."

#: FlatCAMApp.py:3330
msgid "[ERROR_NOTCL] Failed to write factory defaults to file."
msgstr "[ERROR_NOTCL] Failed to write factory defaults to file."

#: FlatCAMApp.py:3334
msgid "Factory defaults saved."
msgstr "Factory defaults saved."

#: FlatCAMApp.py:3339 flatcamGUI/FlatCAMGUI.py:3103
msgid "[WARNING_NOTCL] Application is saving the project. Please wait ..."
msgstr "[WARNING_NOTCL] Application is saving the project. Please wait ..."

#: FlatCAMApp.py:3344
msgid ""
"There are files/objects modified in FlatCAM. \n"
"Do you want to Save the project?"
msgstr ""
"There are files/objects modified in FlatCAM. \n"
"Do you want to Save the project?"

#: FlatCAMApp.py:3347 FlatCAMApp.py:5797
msgid "Save changes"
msgstr "Save changes"

#: FlatCAMApp.py:3414
msgid ""
"[ERROR] Failed join. The Geometry objects are of different types.\n"
"At least one is MultiGeo type and the other is SingleGeo type. A possibility "
"is to convert from one to another and retry joining \n"
"but in the case of converting from MultiGeo to SingleGeo, informations may "
"be lost and the result may not be what was expected. \n"
"Check the generated GCODE."
msgstr ""
"[ERROR] Failed join. The Geometry objects are of different types.\n"
"At least one is MultiGeo type and the other is SingleGeo type. A possibility "
"is to convert from one to another and retry joining \n"
"but in the case of converting from MultiGeo to SingleGeo, informations may "
"be lost and the result may not be what was expected. \n"
"Check the generated GCODE."

#: FlatCAMApp.py:3455
msgid "[ERROR_NOTCL] Failed. Excellon joining works only on Excellon objects."
msgstr "[ERROR_NOTCL] Failed. Excellon joining works only on Excellon objects."

#: FlatCAMApp.py:3477
msgid "[ERROR_NOTCL] Failed. Gerber joining works only on Gerber objects."
msgstr "[ERROR_NOTCL] Failed. Gerber joining works only on Gerber objects."

#: FlatCAMApp.py:3492 FlatCAMApp.py:3517
msgid "[ERROR_NOTCL] Failed. Select a Geometry Object and try again."
msgstr "[ERROR_NOTCL] Failed. Select a Geometry Object and try again."

#: FlatCAMApp.py:3496 FlatCAMApp.py:3521
#, python-format
msgid "[ERROR_NOTCL] Expected a FlatCAMGeometry, got %s"
msgstr "[ERROR_NOTCL] Expected a FlatCAMGeometry, got %s"

#: FlatCAMApp.py:3509
msgid "[success] A Geometry object was converted to MultiGeo type."
msgstr "[success] A Geometry object was converted to MultiGeo type."

#: FlatCAMApp.py:3535
msgid "[success] A Geometry object was converted to SingleGeo type."
msgstr "[success] A Geometry object was converted to SingleGeo type."

#: FlatCAMApp.py:3682 FlatCAMApp.py:4495 FlatCAMApp.py:6064 FlatCAMApp.py:6075
#: FlatCAMApp.py:6312 FlatCAMApp.py:6322
msgid "Ok"
msgstr "Ok"

#: FlatCAMApp.py:3724
#, python-format
msgid "[success] Converted units to %s"
msgstr "[success] Converted units to %s"

#: FlatCAMApp.py:3735
msgid "[WARNING_NOTCL] Units conversion cancelled."
msgstr "[WARNING_NOTCL] Units conversion cancelled."

#: FlatCAMApp.py:4364
msgid "Open file"
msgstr "Open file"

#: FlatCAMApp.py:4395 FlatCAMApp.py:4400
msgid "Export G-Code ..."
msgstr "Export G-Code ..."

#: FlatCAMApp.py:4403
msgid "[WARNING_NOTCL] Export Code cancelled."
msgstr "[WARNING_NOTCL] Export Code cancelled."

#: FlatCAMApp.py:4413
msgid "[WARNING] No such file or directory"
msgstr "[WARNING] No such file or directory"

#: FlatCAMApp.py:4420
#, python-format
msgid "Saved to: %s"
msgstr "Saved to: %s"

#: FlatCAMApp.py:4483 FlatCAMApp.py:4516 FlatCAMApp.py:4527 FlatCAMApp.py:4538
#: flatcamTools/ToolNonCopperClear.py:489 flatcamTools/ToolSolderPaste.py:765
msgid ""
"[WARNING_NOTCL] Please enter a tool diameter with non-zero value, in Float "
"format."
msgstr ""
"[WARNING_NOTCL] Please enter a tool diameter with non-zero value, in Float "
"format."

#: FlatCAMApp.py:4488 FlatCAMApp.py:4521 FlatCAMApp.py:4532 FlatCAMApp.py:4543
#: flatcamGUI/FlatCAMGUI.py:2998
msgid "[WARNING_NOTCL] Adding Tool cancelled ..."
msgstr "[WARNING_NOTCL] Adding Tool cancelled ..."

#: FlatCAMApp.py:4491
msgid ""
"Adding Tool works only when Advanced is checked.\n"
"Go to Preferences -> General - Show Advanced Options."
msgstr ""
"Adding Tool works only when Advanced is checked.\n"
"Go to Preferences -> General - Show Advanced Options."

#: FlatCAMApp.py:4604
msgid "Object(s) deleted ..."
msgstr "Object(s) deleted ..."

#: FlatCAMApp.py:4608
msgid "Failed. No object(s) selected..."
msgstr "Failed. No object(s) selected..."

#: FlatCAMApp.py:4610
msgid "Save the work in Editor and try again ..."
msgstr "Save the work in Editor and try again ..."

#: FlatCAMApp.py:4623
msgid "Click to set the origin ..."
msgstr "Click to set the origin ..."

#: FlatCAMApp.py:4635
msgid "Jump to ..."
msgstr "Jump to ..."

#: FlatCAMApp.py:4636
msgid "Enter the coordinates in format X,Y:"
msgstr "Enter the coordinates in format X,Y:"

#: FlatCAMApp.py:4643
msgid "Wrong coordinates. Enter coordinates in format: X,Y"
msgstr "Wrong coordinates. Enter coordinates in format: X,Y"

#: FlatCAMApp.py:4661 flatcamEditors/FlatCAMExcEditor.py:2285
#: flatcamEditors/FlatCAMExcEditor.py:2292
#: flatcamEditors/FlatCAMGeoEditor.py:3555
#: flatcamEditors/FlatCAMGeoEditor.py:3569
#: flatcamEditors/FlatCAMGrbEditor.py:1037
#: flatcamEditors/FlatCAMGrbEditor.py:1138
#: flatcamEditors/FlatCAMGrbEditor.py:1399
#: flatcamEditors/FlatCAMGrbEditor.py:1649
#: flatcamEditors/FlatCAMGrbEditor.py:3784
#: flatcamEditors/FlatCAMGrbEditor.py:3798 flatcamGUI/FlatCAMGUI.py:2412
#: flatcamGUI/FlatCAMGUI.py:2424
msgid "[success] Done."
msgstr "[success] Done."

#: FlatCAMApp.py:4794 FlatCAMApp.py:4863
#| msgid "[WARNING_NOTCL] No object selected. Please Select an object to flip!"
msgid "[WARNING_NOTCL] No object is selected. Select an object and try again."
msgstr "[WARNING_NOTCL] No object is selected. Select an object and try again."

#: FlatCAMApp.py:4904
msgid "[success] Origin set ..."
msgstr "[success] Origin set ..."

#: FlatCAMApp.py:4924
msgid "Preferences"
msgstr "Preferences"

#: FlatCAMApp.py:4944
msgid "[WARNING_NOTCL] No object selected to Flip on Y axis."
msgstr "[WARNING_NOTCL] No object selected to Flip on Y axis."

#: FlatCAMApp.py:4969
msgid "[success] Flip on Y axis done."
msgstr "[success] Flip on Y axis done."

#: FlatCAMApp.py:4971 FlatCAMApp.py:5011
#: flatcamEditors/FlatCAMGeoEditor.py:1356
#: flatcamEditors/FlatCAMGrbEditor.py:5165 flatcamTools/ToolTransform.py:748
#, python-format
msgid "[ERROR_NOTCL] Due of %s, Flip action was not executed."
msgstr "[ERROR_NOTCL] Due of %s, Flip action was not executed."

#: FlatCAMApp.py:4984
msgid "[WARNING_NOTCL] No object selected to Flip on X axis."
msgstr "[WARNING_NOTCL] No object selected to Flip on X axis."

#: FlatCAMApp.py:5009
msgid "[success] Flip on X axis done."
msgstr "[success] Flip on X axis done."

#: FlatCAMApp.py:5024
msgid "[WARNING_NOTCL] No object selected to Rotate."
msgstr "[WARNING_NOTCL] No object selected to Rotate."

#: FlatCAMApp.py:5027 FlatCAMApp.py:5072 FlatCAMApp.py:5103
msgid "Transform"
msgstr "Transform"

#: FlatCAMApp.py:5027 FlatCAMApp.py:5072 FlatCAMApp.py:5103
msgid "Enter the Angle value:"
msgstr "Enter the Angle value:"

#: FlatCAMApp.py:5057
msgid "[success] Rotation done."
msgstr "[success] Rotation done."

#: FlatCAMApp.py:5059 flatcamEditors/FlatCAMGeoEditor.py:1299
#: flatcamEditors/FlatCAMGrbEditor.py:5096 flatcamTools/ToolTransform.py:677
#, python-format
msgid "[ERROR_NOTCL] Due of %s, rotation movement was not executed."
msgstr "[ERROR_NOTCL] Due of %s, rotation movement was not executed."

#: FlatCAMApp.py:5070
msgid "[WARNING_NOTCL] No object selected to Skew/Shear on X axis."
msgstr "[WARNING_NOTCL] No object selected to Skew/Shear on X axis."

#: FlatCAMApp.py:5091
msgid "[success] Skew on X axis done."
msgstr "[success] Skew on X axis done."

#: FlatCAMApp.py:5101
msgid "[WARNING_NOTCL] No object selected to Skew/Shear on Y axis."
msgstr "[WARNING_NOTCL] No object selected to Skew/Shear on Y axis."

#: FlatCAMApp.py:5122
msgid "[success] Skew on Y axis done."
msgstr "[success] Skew on Y axis done."

#: FlatCAMApp.py:5197 flatcamEditors/FlatCAMGeoEditor.py:938
#: flatcamEditors/FlatCAMGrbEditor.py:2223
#: flatcamEditors/FlatCAMGrbEditor.py:4687 flatcamGUI/ObjectUI.py:991
#: flatcamTools/ToolDblSided.py:160 flatcamTools/ToolDblSided.py:208
#: flatcamTools/ToolNonCopperClear.py:134 flatcamTools/ToolPaint.py:131
#: flatcamTools/ToolSolderPaste.py:115 flatcamTools/ToolSolderPaste.py:479
#: flatcamTools/ToolTransform.py:337
msgid "Add"
msgstr "Add"

#: FlatCAMApp.py:5198 FlatCAMObj.py:3302
#: flatcamEditors/FlatCAMGrbEditor.py:2228 flatcamGUI/FlatCAMGUI.py:532
#: flatcamGUI/FlatCAMGUI.py:726 flatcamGUI/FlatCAMGUI.py:1616
#: flatcamGUI/FlatCAMGUI.py:1948 flatcamGUI/ObjectUI.py:1007
#: flatcamTools/ToolNonCopperClear.py:146 flatcamTools/ToolPaint.py:143
#: flatcamTools/ToolSolderPaste.py:121 flatcamTools/ToolSolderPaste.py:481
msgid "Delete"
msgstr "Delete"

#: FlatCAMApp.py:5210
msgid "New Grid ..."
msgstr "New Grid ..."

#: FlatCAMApp.py:5211
msgid "Enter a Grid Value:"
msgstr "Enter a Grid Value:"

#: FlatCAMApp.py:5219 FlatCAMApp.py:5246
msgid ""
"[WARNING_NOTCL] Please enter a grid value with non-zero value, in Float "
"format."
msgstr ""
"[WARNING_NOTCL] Please enter a grid value with non-zero value, in Float "
"format."

#: FlatCAMApp.py:5225
msgid "[success] New Grid added ..."
msgstr "[success] New Grid added ..."

#: FlatCAMApp.py:5228
msgid "[WARNING_NOTCL] Grid already exists ..."
msgstr "[WARNING_NOTCL] Grid already exists ..."

#: FlatCAMApp.py:5231
msgid "[WARNING_NOTCL] Adding New Grid cancelled ..."
msgstr "[WARNING_NOTCL] Adding New Grid cancelled ..."

#: FlatCAMApp.py:5253
msgid "[ERROR_NOTCL] Grid Value does not exist ..."
msgstr "[ERROR_NOTCL] Grid Value does not exist ..."

#: FlatCAMApp.py:5256
msgid "[success] Grid Value deleted ..."
msgstr "[success] Grid Value deleted ..."

#: FlatCAMApp.py:5259
msgid "[WARNING_NOTCL] Delete Grid value cancelled ..."
msgstr "[WARNING_NOTCL] Delete Grid value cancelled ..."

#: FlatCAMApp.py:5298
msgid "[WARNING_NOTCL] No object selected to copy it's name"
msgstr "[WARNING_NOTCL] No object selected to copy it's name"

#: FlatCAMApp.py:5302
msgid "Name copied on clipboard ..."
msgstr "Name copied on clipboard ..."

#: FlatCAMApp.py:5595 FlatCAMApp.py:5598 FlatCAMApp.py:5601 FlatCAMApp.py:5604
#: FlatCAMApp.py:5619 FlatCAMApp.py:5622 FlatCAMApp.py:5625 FlatCAMApp.py:5628
#: FlatCAMApp.py:5668 FlatCAMApp.py:5671 FlatCAMApp.py:5674 FlatCAMApp.py:5677
#: ObjectCollection.py:717 ObjectCollection.py:720 ObjectCollection.py:723
#: ObjectCollection.py:726
#, python-brace-format
msgid "[selected]<span style=\"color:{color};\">{name}</span> selected"
msgstr "[selected]<span style=\"color:{color};\">{name}</span> selected"

#: FlatCAMApp.py:5794
msgid ""
"There are files/objects opened in FlatCAM.\n"
"Creating a New project will delete them.\n"
"Do you want to Save the project?"
msgstr ""
"There are files/objects opened in FlatCAM.\n"
"Creating a New project will delete them.\n"
"Do you want to Save the project?"

#: FlatCAMApp.py:5815
msgid "[success] New Project created..."
msgstr "[success] New Project created..."

#: FlatCAMApp.py:5923 FlatCAMApp.py:5926 flatcamGUI/FlatCAMGUI.py:613
#: flatcamGUI/FlatCAMGUI.py:1831
msgid "Open Gerber"
msgstr "Open Gerber"

#: FlatCAMApp.py:5931
msgid "[WARNING_NOTCL] Open Gerber cancelled."
msgstr "[WARNING_NOTCL] Open Gerber cancelled."

#: FlatCAMApp.py:5952 FlatCAMApp.py:5955 flatcamGUI/FlatCAMGUI.py:614
#: flatcamGUI/FlatCAMGUI.py:1832
msgid "Open Excellon"
msgstr "Open Excellon"

#: FlatCAMApp.py:5960
msgid "[WARNING_NOTCL] Open Excellon cancelled."
msgstr "[WARNING_NOTCL] Open Excellon cancelled."

#: FlatCAMApp.py:5982 FlatCAMApp.py:5985
msgid "Open G-Code"
msgstr "Open G-Code"

#: FlatCAMApp.py:5990
msgid "[WARNING_NOTCL] Open G-Code cancelled."
msgstr "[WARNING_NOTCL] Open G-Code cancelled."

#: FlatCAMApp.py:6008 FlatCAMApp.py:6011
msgid "Open Project"
msgstr "Open Project"

#: FlatCAMApp.py:6019
msgid "[WARNING_NOTCL] Open Project cancelled."
msgstr "[WARNING_NOTCL] Open Project cancelled."

#: FlatCAMApp.py:6038 FlatCAMApp.py:6041
msgid "Open Configuration File"
msgstr "Open Configuration File"

#: FlatCAMApp.py:6045
msgid "[WARNING_NOTCL Open Config cancelled."
msgstr "[WARNING_NOTCL Open Config cancelled."

#: FlatCAMApp.py:6060 FlatCAMApp.py:6308 FlatCAMApp.py:8519 FlatCAMApp.py:8539
#: FlatCAMApp.py:8560 FlatCAMApp.py:8582
msgid "[WARNING_NOTCL] No object selected."
msgstr "[WARNING_NOTCL] No object selected."

#: FlatCAMApp.py:6061 FlatCAMApp.py:6309
msgid "Please Select a Geometry object to export"
msgstr "Please Select a Geometry object to export"

#: FlatCAMApp.py:6072
msgid "[ERROR_NOTCL] Only Geometry, Gerber and CNCJob objects can be used."
msgstr "[ERROR_NOTCL] Only Geometry, Gerber and CNCJob objects can be used."

#: FlatCAMApp.py:6085 FlatCAMApp.py:6089
msgid "Export SVG"
msgstr "Export SVG"

#: FlatCAMApp.py:6094
msgid "[WARNING_NOTCL] Export SVG cancelled."
msgstr "[WARNING_NOTCL] Export SVG cancelled."

#: FlatCAMApp.py:6110
msgid "[[WARNING_NOTCL]] Data must be a 3D array with last dimension 3 or 4"
msgstr "[[WARNING_NOTCL]] Data must be a 3D array with last dimension 3 or 4"

#: FlatCAMApp.py:6116 FlatCAMApp.py:6120
msgid "Export PNG Image"
msgstr "Export PNG Image"

#: FlatCAMApp.py:6125
msgid "Export PNG cancelled."
msgstr "Export PNG cancelled."

#: FlatCAMApp.py:6144
msgid ""
"[WARNING_NOTCL] No object selected. Please select an Gerber object to export."
msgstr ""
"[WARNING_NOTCL] No object selected. Please select an Gerber object to export."

#: FlatCAMApp.py:6149 FlatCAMApp.py:6272
msgid ""
"[ERROR_NOTCL] Failed. Only Gerber objects can be saved as Gerber files..."
msgstr ""
"[ERROR_NOTCL] Failed. Only Gerber objects can be saved as Gerber files..."

#: FlatCAMApp.py:6161
msgid "Save Gerber source file"
msgstr "Save Gerber source file"

#: FlatCAMApp.py:6166
msgid "[WARNING_NOTCL] Save Gerber source file cancelled."
msgstr "[WARNING_NOTCL] Save Gerber source file cancelled."

#: FlatCAMApp.py:6185
msgid ""
"[WARNING_NOTCL] No object selected. Please select an Excellon object to "
"export."
msgstr ""
"[WARNING_NOTCL] No object selected. Please select an Excellon object to "
"export."

#: FlatCAMApp.py:6190 FlatCAMApp.py:6231
msgid ""
"[ERROR_NOTCL] Failed. Only Excellon objects can be saved as Excellon files..."
msgstr ""
"[ERROR_NOTCL] Failed. Only Excellon objects can be saved as Excellon files..."

#: FlatCAMApp.py:6198 FlatCAMApp.py:6202
msgid "Save Excellon source file"
msgstr "Save Excellon source file"

#: FlatCAMApp.py:6207
msgid "[WARNING_NOTCL] Saving Excellon source file cancelled."
msgstr "[WARNING_NOTCL] Saving Excellon source file cancelled."

#: FlatCAMApp.py:6226
msgid ""
"[WARNING_NOTCL] No object selected. Please Select an Excellon object to "
"export."
msgstr ""
"[WARNING_NOTCL] No object selected. Please Select an Excellon object to "
"export."

#: FlatCAMApp.py:6239 FlatCAMApp.py:6243
msgid "Export Excellon"
msgstr "Export Excellon"

#: FlatCAMApp.py:6248
msgid "[WARNING_NOTCL] Export Excellon cancelled."
msgstr "[WARNING_NOTCL] Export Excellon cancelled."

#: FlatCAMApp.py:6267
#| msgid ""
#| "[WARNING_NOTCL] No object selected. Please select an Gerber object to "
#| "export."
msgid ""
"[WARNING_NOTCL] No object selected. Please Select an Gerber object to export."
msgstr ""
"[WARNING_NOTCL] No object selected. Please Select an Gerber object to export."

#: FlatCAMApp.py:6280 FlatCAMApp.py:6284
#| msgid "Export SVG"
msgid "Export Gerber"
msgstr "Export Gerber"

#: FlatCAMApp.py:6289
#| msgid "[WARNING_NOTCL] Export SVG cancelled."
msgid "[WARNING_NOTCL] Export Gerber cancelled."
msgstr "[WARNING_NOTCL] Export Gerber cancelled."

#: FlatCAMApp.py:6319
msgid "[ERROR_NOTCL] Only Geometry objects can be used."
msgstr "[ERROR_NOTCL] Only Geometry objects can be used."

#: FlatCAMApp.py:6333 FlatCAMApp.py:6337
msgid "Export DXF"
msgstr "Export DXF"

#: FlatCAMApp.py:6342
msgid "[WARNING_NOTCL] Export DXF cancelled."
msgstr "[WARNING_NOTCL] Export DXF cancelled."

#: FlatCAMApp.py:6362 FlatCAMApp.py:6365
msgid "Import SVG"
msgstr "Import SVG"

#: FlatCAMApp.py:6373
msgid "[WARNING_NOTCL] Open SVG cancelled."
msgstr "[WARNING_NOTCL] Open SVG cancelled."

#: FlatCAMApp.py:6392 FlatCAMApp.py:6395
msgid "Import DXF"
msgstr "Import DXF"

#: FlatCAMApp.py:6403
msgid "[WARNING_NOTCL] Open DXF cancelled."
msgstr "[WARNING_NOTCL] Open DXF cancelled."

#: FlatCAMApp.py:6421
#, python-format
msgid "%s"
msgstr "%s"

#: FlatCAMApp.py:6441
msgid ""
"[WARNING_NOTCL] Select an Gerber or Excellon file to view it's source file."
msgstr ""
"[WARNING_NOTCL] Select an Gerber or Excellon file to view it's source file."

#: FlatCAMApp.py:6448
msgid ""
"[WARNING_NOTCL] There is no selected object for which to see it's source "
"file code."
msgstr ""
"[WARNING_NOTCL] There is no selected object for which to see it's source "
"file code."

#: FlatCAMApp.py:6456
msgid "Source Editor"
msgstr "Source Editor"

#: FlatCAMApp.py:6466
#, python-format
msgid "[ERROR]App.on_view_source() -->%s"
msgstr "[ERROR]App.on_view_source() -->%s"

#: FlatCAMApp.py:6478 FlatCAMApp.py:7621 FlatCAMObj.py:5573
msgid "Code Editor"
msgstr "Code Editor"

#: FlatCAMApp.py:6490
msgid "Script Editor"
msgstr "Script Editor"

#: FlatCAMApp.py:6493
msgid ""
"#\n"
"# CREATE A NEW FLATCAM TCL SCRIPT\n"
"# TCL Tutorial here: https://www.tcl.tk/man/tcl8.5/tutorial/tcltutorial."
"html\n"
"#\n"
"\n"
"# FlatCAM commands list:\n"
"# AddCircle, AddPolygon, AddPolyline, AddRectangle, AlignDrill, "
"AlignDrillGrid, ClearShell, Cncjob,\n"
"# Cutout, Delete, Drillcncjob, ExportGcode, ExportSVG, Exteriors, GeoCutout, "
"GeoUnion, GetNames, GetSys,\n"
"# ImportSvg, Interiors, Isolate, Follow, JoinExcellon, JoinGeometry, "
"ListSys, MillHoles, Mirror, New,\n"
"# NewGeometry, Offset, OpenExcellon, OpenGCode, OpenGerber, OpenProject, "
"Options, Paint, Panelize,\n"
"# Plot, SaveProject, SaveSys, Scale, SetActive, SetSys, Skew, SubtractPoly,"
"SubtractRectangle, Version,\n"
"# WriteGCode\n"
"#\n"
"\n"
msgstr ""
"#\n"
"# CREATE A NEW FLATCAM TCL SCRIPT\n"
"# TCL Tutorial here: https://www.tcl.tk/man/tcl8.5/tutorial/tcltutorial."
"html\n"
"#\n"
"\n"
"# FlatCAM commands list:\n"
"# AddCircle, AddPolygon, AddPolyline, AddRectangle, AlignDrill, "
"AlignDrillGrid, ClearShell, Cncjob,\n"
"# Cutout, Delete, Drillcncjob, ExportGcode, ExportSVG, Exteriors, GeoCutout, "
"GeoUnion, GetNames, GetSys,\n"
"# ImportSvg, Interiors, Isolate, Follow, JoinExcellon, JoinGeometry, "
"ListSys, MillHoles, Mirror, New,\n"
"# NewGeometry, Offset, OpenExcellon, OpenGCode, OpenGerber, OpenProject, "
"Options, Paint, Panelize,\n"
"# Plot, SaveProject, SaveSys, Scale, SetActive, SetSys, Skew, SubtractPoly,"
"SubtractRectangle, Version,\n"
"# WriteGCode\n"
"#\n"
"\n"

#: FlatCAMApp.py:6516 FlatCAMApp.py:6519
msgid "Open TCL script"
msgstr "Open TCL script"

#: FlatCAMApp.py:6527
msgid "[WARNING_NOTCL] Open TCL script cancelled."
msgstr "[WARNING_NOTCL] Open TCL script cancelled."

#: FlatCAMApp.py:6539
#, python-format
msgid "[ERROR]App.on_fileopenscript() -->%s"
msgstr "[ERROR]App.on_fileopenscript() -->%s"

#: FlatCAMApp.py:6565 FlatCAMApp.py:6568
msgid "Run TCL script"
msgstr "Run TCL script"

#: FlatCAMApp.py:6576
msgid "[WARNING_NOTCL] Run TCL script cancelled."
msgstr "[WARNING_NOTCL] Run TCL script cancelled."

#: FlatCAMApp.py:6622 FlatCAMApp.py:6626
msgid "Save Project As ..."
msgstr "Save Project As ..."

#: FlatCAMApp.py:6623
#, python-brace-format
msgid "{l_save}/Project_{date}"
msgstr "{l_save}/Project_{date}"

#: FlatCAMApp.py:6631
msgid "[WARNING_NOTCL] Save Project cancelled."
msgstr "[WARNING_NOTCL] Save Project cancelled."

#: FlatCAMApp.py:6676
msgid "Exporting SVG"
msgstr "Exporting SVG"

#: FlatCAMApp.py:6710 FlatCAMApp.py:6816 FlatCAMApp.py:6931
#, python-format
msgid "[success] SVG file exported to %s"
msgstr "[success] SVG file exported to %s"

#: FlatCAMApp.py:6741 FlatCAMApp.py:6862
#, python-format
msgid "[WARNING_NOTCL] No object Box. Using instead %s"
msgstr "[WARNING_NOTCL] No object Box. Using instead %s"

#: FlatCAMApp.py:6819 FlatCAMApp.py:6934
msgid "Generating Film ... Please wait."
msgstr "Generating Film ... Please wait."

#: FlatCAMApp.py:7082
#, python-format
msgid "[success] Excellon file exported to %s"
msgstr "[success] Excellon file exported to %s"

#: FlatCAMApp.py:7089
msgid "Exporting Excellon"
msgstr "Exporting Excellon"

#: FlatCAMApp.py:7094 FlatCAMApp.py:7101
msgid "[ERROR_NOTCL] Could not export Excellon file."
msgstr "[ERROR_NOTCL] Could not export Excellon file."

#: FlatCAMApp.py:7199
#, python-format
#| msgid "[success] SVG file exported to %s"
msgid "[success] Gerber file exported to %s"
msgstr "[success] Gerber file exported to %s"

#: FlatCAMApp.py:7206
#| msgid "Exporting SVG"
msgid "Exporting Gerber"
msgstr "Exporting Gerber"

#: FlatCAMApp.py:7211 FlatCAMApp.py:7218
#| msgid "[ERROR_NOTCL] Could not export Excellon file."
msgid "[ERROR_NOTCL] Could not export Gerber file."
msgstr "[ERROR_NOTCL] Could not export Gerber file."

#: FlatCAMApp.py:7258
#, python-format
msgid "[success] DXF file exported to %s"
msgstr "[success] DXF file exported to %s"

#: FlatCAMApp.py:7264
msgid "Exporting DXF"
msgstr "Exporting DXF"

#: FlatCAMApp.py:7269 FlatCAMApp.py:7276
msgid "[[WARNING_NOTCL]] Could not export DXF file."
msgstr "[[WARNING_NOTCL]] Could not export DXF file."

#: FlatCAMApp.py:7296 FlatCAMApp.py:7338 FlatCAMApp.py:7379
msgid ""
"[ERROR_NOTCL] Not supported type is picked as parameter. Only Geometry and "
"Gerber are supported"
msgstr ""
"[ERROR_NOTCL] Not supported type is picked as parameter. Only Geometry and "
"Gerber are supported"

#: FlatCAMApp.py:7306
msgid "Importing SVG"
msgstr "Importing SVG"

#: FlatCAMApp.py:7317 FlatCAMApp.py:7359 FlatCAMApp.py:7399 FlatCAMApp.py:7475
#: FlatCAMApp.py:7542 FlatCAMApp.py:7607 flatcamTools/ToolPDF.py:212
#, python-format
msgid "[success] Opened: %s"
msgstr "[success] Opened: %s"

#: FlatCAMApp.py:7348
msgid "Importing DXF"
msgstr "Importing DXF"

#: FlatCAMApp.py:7387
msgid "Importing Image"
msgstr "Importing Image"

#: FlatCAMApp.py:7428 FlatCAMApp.py:7430
#, python-format
msgid "[ERROR_NOTCL] Failed to open file: %s"
msgstr "[ERROR_NOTCL] Failed to open file: %s"

#: FlatCAMApp.py:7433
#, python-brace-format
msgid "[ERROR_NOTCL] Failed to parse file: {name}. {error}"
msgstr "[ERROR_NOTCL] Failed to parse file: {name}. {error}"

#: FlatCAMApp.py:7439 FlatCAMObj.py:4271
#: flatcamEditors/FlatCAMExcEditor.py:2041
msgid "[ERROR] An internal error has ocurred. See shell.\n"
msgstr "[ERROR] An internal error has ocurred. See shell.\n"

#: FlatCAMApp.py:7448
msgid ""
"[ERROR_NOTCL] Object is not Gerber file or empty. Aborting object creation."
msgstr ""
"[ERROR_NOTCL] Object is not Gerber file or empty. Aborting object creation."

#: FlatCAMApp.py:7456
msgid "Opening Gerber"
msgstr "Opening Gerber"

#: FlatCAMApp.py:7466
msgid "[ERROR_NOTCL] Open Gerber failed. Probable not a Gerber file."
msgstr "[ERROR_NOTCL] Open Gerber failed. Probable not a Gerber file."

#: FlatCAMApp.py:7501 flatcamTools/ToolPcbWizard.py:421
msgid "[ERROR_NOTCL] This is not Excellon file."
msgstr "[ERROR_NOTCL] This is not Excellon file."

#: FlatCAMApp.py:7504
#, python-format
msgid "[ERROR_NOTCL] Cannot open file: %s"
msgstr "[ERROR_NOTCL] Cannot open file: %s"

#: FlatCAMApp.py:7509 flatcamTools/ToolPcbWizard.py:429
msgid "[ERROR_NOTCL] An internal error has occurred. See shell.\n"
msgstr "[ERROR_NOTCL] An internal error has occurred. See shell.\n"

#: FlatCAMApp.py:7525 flatcamTools/ToolPDF.py:262
#: flatcamTools/ToolPcbWizard.py:442
#, python-format
msgid "[ERROR_NOTCL] No geometry found in file: %s"
msgstr "[ERROR_NOTCL] No geometry found in file: %s"

#: FlatCAMApp.py:7528
msgid "Opening Excellon."
msgstr "Opening Excellon."

#: FlatCAMApp.py:7535
msgid "[ERROR_NOTCL] Open Excellon file failed. Probable not an Excellon file."
msgstr ""
"[ERROR_NOTCL] Open Excellon file failed. Probable not an Excellon file."

#: FlatCAMApp.py:7574
#, python-format
msgid "[ERROR_NOTCL] Failed to open %s"
msgstr "[ERROR_NOTCL] Failed to open %s"

#: FlatCAMApp.py:7584
msgid "[ERROR_NOTCL] This is not GCODE"
msgstr "[ERROR_NOTCL] This is not GCODE"

#: FlatCAMApp.py:7590
msgid "Opening G-Code."
msgstr "Opening G-Code."

#: FlatCAMApp.py:7598
msgid ""
"[ERROR_NOTCL] Failed to create CNCJob Object. Probable not a GCode file.\n"
" Attempting to create a FlatCAM CNCJob Object from G-Code file failed during "
"processing"
msgstr ""
"[ERROR_NOTCL] Failed to create CNCJob Object. Probable not a GCode file.\n"
" Attempting to create a FlatCAM CNCJob Object from G-Code file failed during "
"processing"

#: FlatCAMApp.py:7638
#, python-format
msgid "[ERROR_NOTCL] Failed to open config file: %s"
msgstr "[ERROR_NOTCL] Failed to open config file: %s"

#: FlatCAMApp.py:7663 FlatCAMApp.py:7679
#, python-format
msgid "[ERROR_NOTCL] Failed to open project file: %s"
msgstr "[ERROR_NOTCL] Failed to open project file: %s"

#: FlatCAMApp.py:7705
#, python-format
msgid "[success] Project loaded from: %s"
msgstr "[success] Project loaded from: %s"

#: FlatCAMApp.py:7835
msgid "Available commands:\n"
msgstr "Available commands:\n"

#: FlatCAMApp.py:7837
msgid ""
"\n"
"\n"
"Type help <command_name> for usage.\n"
" Example: help open_gerber"
msgstr ""
"\n"
"\n"
"Type help <command_name> for usage.\n"
" Example: help open_gerber"

#: FlatCAMApp.py:7985
msgid "Shows list of commands."
msgstr "Shows list of commands."

#: FlatCAMApp.py:8042
msgid "[ERROR_NOTCL] Failed to load recent item list."
msgstr "[ERROR_NOTCL] Failed to load recent item list."

#: FlatCAMApp.py:8049
msgid "[ERROR_NOTCL] Failed to parse recent item list."
msgstr "[ERROR_NOTCL] Failed to parse recent item list."

#: FlatCAMApp.py:8110 flatcamGUI/FlatCAMGUI.py:970
msgid "<b>Shortcut Key List</b>"
msgstr "<b>Shortcut Key List</b>"

#: FlatCAMApp.py:8117
msgid ""
"\n"
"<p><span style=\"font-size:14px\"><strong>Selected Tab - Choose an Item from "
"Project Tab</strong></span></p>\n"
"\n"
"<p><span style=\"font-size:10px\"><strong>Details</strong>:<br />\n"
"The normal flow when working in FlatCAM is the following:</span></p>\n"
"\n"
"<ol>\n"
"\t<li><span style=\"font-size:10px\">Loat/Import a Gerber, Excellon, Gcode, "
"DXF, Raster Image or SVG file into FlatCAM using either the menu&#39;s, "
"toolbars, key shortcuts or even dragging and dropping the files on the GUI."
"<br />\n"
"\t<br />\n"
"\tYou can also load a <strong>FlatCAM project</strong> by double clicking on "
"the project file, drag &amp; drop of the file into the FLATCAM GUI or "
"through the menu/toolbar links offered within the app.</span><br />\n"
"\t&nbsp;</li>\n"
"\t<li><span style=\"font-size:10px\">Once an object is available in the "
"Project Tab, by selecting it and then focusing on <strong>SELECTED TAB </"
"strong>(more simpler is to double click the object name in the Project Tab), "
"<strong>SELECTED TAB </strong>will be updated with the object properties "
"according to it&#39;s kind: Gerber, Excellon, Geometry or CNCJob object.<br /"
">\n"
"\t<br />\n"
"\tIf the selection of the object is done on the canvas by single click "
"instead, and the <strong>SELECTED TAB</strong> is in focus, again the object "
"properties will be displayed into the Selected Tab. Alternatively, double "
"clicking on the object on the canvas will bring the <strong>SELECTED TAB</"
"strong> and populate it even if it was out of focus.<br />\n"
"\t<br />\n"
"\tYou can change the parameters in this screen and the flow direction is "
"like this:<br />\n"
"\t<br />\n"
"\t<strong>Gerber/Excellon Object</strong> -&gt; Change Param -&gt; Generate "
"Geometry -&gt;<strong> Geometry Object </strong>-&gt; Add tools (change "
"param in Selected Tab) -&gt; Generate CNCJob -&gt;<strong> CNCJob Object </"
"strong>-&gt; Verify GCode (through Edit CNC Code) and/or append/prepend to "
"GCode (again, done in <strong>SELECTED TAB)&nbsp;</strong>-&gt; Save GCode</"
"span></li>\n"
"</ol>\n"
"\n"
"<p><span style=\"font-size:10px\">A list of key shortcuts is available "
"through an menu entry in <strong>Help -&gt; Shortcuts List</strong>&nbsp;or "
"through it&#39;s own key shortcut: <strng>F3</strong>.</span></p>\n"
"\n"
"        "
msgstr ""
"\n"
"<p><span style=\"font-size:14px\"><strong>Selected Tab - Choose an Item from "
"Project Tab</strong></span></p>\n"
"\n"
"<p><span style=\"font-size:10px\"><strong>Details</strong>:<br />\n"
"The normal flow when working in FlatCAM is the following:</span></p>\n"
"\n"
"<ol>\n"
"\t<li><span style=\"font-size:10px\">Loat/Import a Gerber, Excellon, Gcode, "
"DXF, Raster Image or SVG file into FlatCAM using either the menu&#39;s, "
"toolbars, key shortcuts or even dragging and dropping the files on the GUI."
"<br />\n"
"\t<br />\n"
"\tYou can also load a <strong>FlatCAM project</strong> by double clicking on "
"the project file, drag &amp; drop of the file into the FLATCAM GUI or "
"through the menu/toolbar links offered within the app.</span><br />\n"
"\t&nbsp;</li>\n"
"\t<li><span style=\"font-size:10px\">Once an object is available in the "
"Project Tab, by selecting it and then focusing on <strong>SELECTED TAB </"
"strong>(more simpler is to double click the object name in the Project Tab), "
"<strong>SELECTED TAB </strong>will be updated with the object properties "
"according to it&#39;s kind: Gerber, Excellon, Geometry or CNCJob object.<br /"
">\n"
"\t<br />\n"
"\tIf the selection of the object is done on the canvas by single click "
"instead, and the <strong>SELECTED TAB</strong> is in focus, again the object "
"properties will be displayed into the Selected Tab. Alternatively, double "
"clicking on the object on the canvas will bring the <strong>SELECTED TAB</"
"strong> and populate it even if it was out of focus.<br />\n"
"\t<br />\n"
"\tYou can change the parameters in this screen and the flow direction is "
"like this:<br />\n"
"\t<br />\n"
"\t<strong>Gerber/Excellon Object</strong> -&gt; Change Param -&gt; Generate "
"Geometry -&gt;<strong> Geometry Object </strong>-&gt; Add tools (change "
"param in Selected Tab) -&gt; Generate CNCJob -&gt;<strong> CNCJob Object </"
"strong>-&gt; Verify GCode (through Edit CNC Code) and/or append/prepend to "
"GCode (again, done in <strong>SELECTED TAB)&nbsp;</strong>-&gt; Save GCode</"
"span></li>\n"
"</ol>\n"
"\n"
"<p><span style=\"font-size:10px\">A list of key shortcuts is available "
"through an menu entry in <strong>Help -&gt; Shortcuts List</strong>&nbsp;or "
"through it&#39;s own key shortcut: <strng>F3</strong>.</span></p>\n"
"\n"
"        "

#: FlatCAMApp.py:8221
msgid "[WARNING_NOTCL] Failed checking for latest version. Could not connect."
msgstr "[WARNING_NOTCL] Failed checking for latest version. Could not connect."

#: FlatCAMApp.py:8228
msgid "[ERROR_NOTCL] Could not parse information about latest version."
msgstr "[ERROR_NOTCL] Could not parse information about latest version."

#: FlatCAMApp.py:8238
msgid "[success] FlatCAM is up to date!"
msgstr "[success] FlatCAM is up to date!"

#: FlatCAMApp.py:8243
msgid "Newer Version Available"
msgstr "Newer Version Available"

#: FlatCAMApp.py:8244
msgid ""
"There is a newer version of FlatCAM available for download:\n"
"\n"
msgstr ""
"There is a newer version of FlatCAM available for download:\n"
"\n"

#: FlatCAMApp.py:8246
msgid "info"
msgstr "info"

#: FlatCAMApp.py:8265
msgid "[success] All plots disabled."
msgstr "[success] All plots disabled."

#: FlatCAMApp.py:8271
msgid "[success] All non selected plots disabled."
msgstr "[success] All non selected plots disabled."

#: FlatCAMApp.py:8277
msgid "[success] All plots enabled."
msgstr "[success] All plots enabled."

#: FlatCAMApp.py:8388
msgid "Saving FlatCAM Project"
msgstr "Saving FlatCAM Project"

#: FlatCAMApp.py:8409 FlatCAMApp.py:8440
#, python-format
msgid "[success] Project saved to: %s"
msgstr "[success] Project saved to: %s"

#: FlatCAMApp.py:8427
#, python-format
msgid "[ERROR_NOTCL] Failed to verify project file: %s. Retry to save it."
msgstr "[ERROR_NOTCL] Failed to verify project file: %s. Retry to save it."

#: FlatCAMApp.py:8434
#, python-format
msgid "[ERROR_NOTCL] Failed to parse saved project file: %s. Retry to save it."
msgstr ""
"[ERROR_NOTCL] Failed to parse saved project file: %s. Retry to save it."

#: FlatCAMApp.py:8442
#, python-format
msgid "[ERROR_NOTCL] Failed to save project file: %s. Retry to save it."
msgstr "[ERROR_NOTCL] Failed to save project file: %s. Retry to save it."

#: FlatCAMObj.py:201
#, python-brace-format
msgid "[success] Name changed from {old} to {new}"
msgstr "[success] Name changed from {old} to {new}"

#: FlatCAMObj.py:548 FlatCAMObj.py:2033 FlatCAMObj.py:3307 FlatCAMObj.py:5470
msgid "<span style=\"color:green;\"><b>Basic</b></span>"
msgstr "<span style=\"color:green;\"><b>Basic</b></span>"

#: FlatCAMObj.py:560 FlatCAMObj.py:2049 FlatCAMObj.py:3329 FlatCAMObj.py:5476
msgid "<span style=\"color:red;\"><b>Advanced</b></span>"
msgstr "<span style=\"color:red;\"><b>Advanced</b></span>"

#: FlatCAMObj.py:923 FlatCAMObj.py:978
#, python-format
msgid "[success] Isolation geometry created: %s"
msgstr "[success] Isolation geometry created: %s"

#: FlatCAMObj.py:1157
msgid "Plotting Apertures"
msgstr "Plotting Apertures"

#: FlatCAMObj.py:1872 flatcamEditors/FlatCAMExcEditor.py:1332
msgid "Total Drills"
msgstr "Total Drills"

#: FlatCAMObj.py:1898 flatcamEditors/FlatCAMExcEditor.py:1364
msgid "Total Slots"
msgstr "Total Slots"

#: FlatCAMObj.py:2105 FlatCAMObj.py:3380 FlatCAMObj.py:3687 FlatCAMObj.py:3874
#: FlatCAMObj.py:3887 FlatCAMObj.py:4004 FlatCAMObj.py:4419 FlatCAMObj.py:4654
#: FlatCAMObj.py:5062 flatcamEditors/FlatCAMExcEditor.py:1439
#: flatcamTools/ToolCalculators.py:307 flatcamTools/ToolCalculators.py:318
#: flatcamTools/ToolCalculators.py:330 flatcamTools/ToolCalculators.py:345
#: flatcamTools/ToolCalculators.py:358 flatcamTools/ToolCalculators.py:372
#: flatcamTools/ToolCalculators.py:383 flatcamTools/ToolCalculators.py:394
#: flatcamTools/ToolCalculators.py:405 flatcamTools/ToolFilm.py:241
#: flatcamTools/ToolFilm.py:248 flatcamTools/ToolNonCopperClear.py:480
#: flatcamTools/ToolNonCopperClear.py:551
#: flatcamTools/ToolNonCopperClear.py:627
#: flatcamTools/ToolNonCopperClear.py:644 flatcamTools/ToolPaint.py:538
#: flatcamTools/ToolPaint.py:608 flatcamTools/ToolPaint.py:743
#: flatcamTools/ToolPaint.py:840 flatcamTools/ToolPaint.py:995
#: flatcamTools/ToolPanelize.py:385 flatcamTools/ToolPanelize.py:397
#: flatcamTools/ToolPanelize.py:410 flatcamTools/ToolPanelize.py:423
#: flatcamTools/ToolPanelize.py:435 flatcamTools/ToolPanelize.py:446
#: flatcamTools/ToolSolderPaste.py:756 flatcamTools/ToolSolderPaste.py:827
msgid "[ERROR_NOTCL] Wrong value format entered, use a number."
msgstr "[ERROR_NOTCL] Wrong value format entered, use a number."

#: FlatCAMObj.py:2329 FlatCAMObj.py:2420 FlatCAMObj.py:2542
msgid ""
"[ERROR_NOTCL] Please select one or more tools from the list and try again."
msgstr ""
"[ERROR_NOTCL] Please select one or more tools from the list and try again."

#: FlatCAMObj.py:2336
msgid ""
"[ERROR_NOTCL] Milling tool for DRILLS is larger than hole size. Cancelled."
msgstr ""
"[ERROR_NOTCL] Milling tool for DRILLS is larger than hole size. Cancelled."

#: FlatCAMObj.py:2350 FlatCAMObj.py:2444 FlatCAMObj.py:2562
msgid "Tool_nr"
msgstr "Tool_nr"

#: FlatCAMObj.py:2350 FlatCAMObj.py:2444 FlatCAMObj.py:2562
#: flatcamEditors/FlatCAMExcEditor.py:785
#: flatcamEditors/FlatCAMExcEditor.py:1984 flatcamGUI/ObjectUI.py:556
#: flatcamTools/ToolNonCopperClear.py:83 flatcamTools/ToolPaint.py:80
#: flatcamTools/ToolPcbWizard.py:78 flatcamTools/ToolSolderPaste.py:81
msgid "Diameter"
msgstr "Diameter"

#: FlatCAMObj.py:2350 FlatCAMObj.py:2444 FlatCAMObj.py:2562
msgid "Drills_Nr"
msgstr "Drills_Nr"

#: FlatCAMObj.py:2350 FlatCAMObj.py:2444 FlatCAMObj.py:2562
msgid "Slots_Nr"
msgstr "Slots_Nr"

#: FlatCAMObj.py:2430
msgid ""
"[ERROR_NOTCL] Milling tool for SLOTS is larger than hole size. Cancelled."
msgstr ""
"[ERROR_NOTCL] Milling tool for SLOTS is larger than hole size. Cancelled."

#: FlatCAMObj.py:2604 FlatCAMObj.py:4307 FlatCAMObj.py:4520 FlatCAMObj.py:4837
msgid ""
"[ERROR_NOTCL] Wrong value format for self.defaults[\"z_pdepth\"] or self."
"options[\"z_pdepth\"]"
msgstr ""
"[ERROR_NOTCL] Wrong value format for self.defaults[\"z_pdepth\"] or self."
"options[\"z_pdepth\"]"

#: FlatCAMObj.py:2616 FlatCAMObj.py:4319 FlatCAMObj.py:4532 FlatCAMObj.py:4849
msgid ""
"[ERROR_NOTCL] Wrong value format for self.defaults[\"feedrate_probe\"] or "
"self.options[\"feedrate_probe\"]"
msgstr ""
"[ERROR_NOTCL] Wrong value format for self.defaults[\"feedrate_probe\"] or "
"self.options[\"feedrate_probe\"]"

#: FlatCAMObj.py:2648 FlatCAMObj.py:4724 FlatCAMObj.py:4729 FlatCAMObj.py:4875
msgid "Generating CNC Code"
msgstr "Generating CNC Code"

#: FlatCAMObj.py:2674 FlatCAMObj.py:5021 camlib.py:5165 camlib.py:5624
#: camlib.py:5887
msgid ""
"[ERROR]The Toolchange X,Y field in Edit -> Preferences has to be in the "
"format (x, y) \n"
"but now there is only one value, not two. "
msgstr ""
"[ERROR]The Toolchange X,Y field in Edit -> Preferences has to be in the "
"format (x, y) \n"
"but now there is only one value, not two. "

#: FlatCAMObj.py:3022 FlatCAMObj.py:3930 FlatCAMObj.py:3931 FlatCAMObj.py:3940
msgid "Iso"
msgstr "Iso"

#: FlatCAMObj.py:3022 FlatCAMObj.py:3265 FlatCAMObj.py:3552
msgid "Rough"
msgstr "Rough"

#: FlatCAMObj.py:3022
msgid "Finish"
msgstr "Finish"

#: FlatCAMObj.py:3300 flatcamGUI/FlatCAMGUI.py:531 flatcamGUI/FlatCAMGUI.py:724
#: flatcamGUI/FlatCAMGUI.py:1615 flatcamGUI/FlatCAMGUI.py:1946
#: flatcamGUI/ObjectUI.py:999
msgid "Copy"
msgstr "Copy"

#: FlatCAMObj.py:3522
msgid "[ERROR_NOTCL] Please enter the desired tool diameter in Float format."
msgstr "[ERROR_NOTCL] Please enter the desired tool diameter in Float format."

#: FlatCAMObj.py:3597
msgid "[success] Tool added in Tool Table."
msgstr "[success] Tool added in Tool Table."

#: FlatCAMObj.py:3602
msgid "[ERROR_NOTCL] Default Tool added. Wrong value format entered."
msgstr "[ERROR_NOTCL] Default Tool added. Wrong value format entered."

#: FlatCAMObj.py:3632 FlatCAMObj.py:3642
msgid "[WARNING_NOTCL] Failed. Select a tool to copy."
msgstr "[WARNING_NOTCL] Failed. Select a tool to copy."

#: FlatCAMObj.py:3671
msgid "[success] Tool was copied in Tool Table."
msgstr "[success] Tool was copied in Tool Table."

#: FlatCAMObj.py:3704
msgid "[success] Tool was edited in Tool Table."
msgstr "[success] Tool was edited in Tool Table."

#: FlatCAMObj.py:3735 FlatCAMObj.py:3745
msgid "[WARNING_NOTCL] Failed. Select a tool to delete."
msgstr "[WARNING_NOTCL] Failed. Select a tool to delete."

#: FlatCAMObj.py:3769
msgid "[success] Tool was deleted in Tool Table."
msgstr "[success] Tool was deleted in Tool Table."

#: FlatCAMObj.py:4190
#, python-format
msgid ""
"[WARNING_NOTCL] This Geometry can't be processed because it is %s geometry."
msgstr ""
"[WARNING_NOTCL] This Geometry can't be processed because it is %s geometry."

#: FlatCAMObj.py:4207
msgid "[ERROR_NOTCL] Wrong Tool Dia value format entered, use a number."
msgstr "[ERROR_NOTCL] Wrong Tool Dia value format entered, use a number."

#: FlatCAMObj.py:4234
msgid "[ERROR_NOTCL] Failed. No tool selected in the tool table ..."
msgstr "[ERROR_NOTCL] Failed. No tool selected in the tool table ..."

#: FlatCAMObj.py:4272
#, python-format
msgid "FlatCAMObj.FlatCAMGeometry.mtool_gen_cncjob() --> %s"
msgstr "FlatCAMObj.FlatCAMGeometry.mtool_gen_cncjob() --> %s"

#: FlatCAMObj.py:4428 FlatCAMObj.py:4663
msgid ""
"[WARNING] Tool Offset is selected in Tool Table but no value is provided.\n"
"Add a Tool Offset or change the Offset Type."
msgstr ""
"[WARNING] Tool Offset is selected in Tool Table but no value is provided.\n"
"Add a Tool Offset or change the Offset Type."

#: FlatCAMObj.py:4544 flatcamTools/ToolSolderPaste.py:1107
#: flatcamTools/ToolSolderPaste.py:1162
msgid "[ERROR_NOTCL] Cancelled. Empty file, it has no geometry..."
msgstr "[ERROR_NOTCL] Cancelled. Empty file, it has no geometry..."

#: FlatCAMObj.py:4908 FlatCAMObj.py:4918 camlib.py:3346 camlib.py:3355
msgid "[ERROR_NOTCL] Scale factor has to be a number: integer or float."
msgstr "[ERROR_NOTCL] Scale factor has to be a number: integer or float."

#: FlatCAMObj.py:4956
msgid "[success] Geometry Scale done."
msgstr "[success] Geometry Scale done."

#: FlatCAMObj.py:4973 camlib.py:3425
msgid ""
"[ERROR_NOTCL] An (x,y) pair of values are needed. Probable you entered only "
"one value in the Offset field."
msgstr ""
"[ERROR_NOTCL] An (x,y) pair of values are needed. Probable you entered only "
"one value in the Offset field."

#: FlatCAMObj.py:4993
msgid "[success] Geometry Offset done."
msgstr "[success] Geometry Offset done."

#: FlatCAMObj.py:5538 FlatCAMObj.py:5543 flatcamTools/ToolSolderPaste.py:1361
msgid "Export Machine Code ..."
msgstr "Export Machine Code ..."

#: FlatCAMObj.py:5549 flatcamTools/ToolSolderPaste.py:1364
msgid "[WARNING_NOTCL] Export Machine Code cancelled ..."
msgstr "[WARNING_NOTCL] Export Machine Code cancelled ..."

#: FlatCAMObj.py:5562
#, python-format
msgid "[success] Machine Code file saved to: %s"
msgstr "[success] Machine Code file saved to: %s"

#: FlatCAMObj.py:5584
#, python-format
msgid "[ERROR]FlatCAMCNNJob.on_edit_code_click() -->%s"
msgstr "[ERROR]FlatCAMCNNJob.on_edit_code_click() -->%s"

#: FlatCAMObj.py:5701
#, python-format
msgid ""
"[WARNING_NOTCL] This CNCJob object can't be processed because it is a %s "
"CNCJob object."
msgstr ""
"[WARNING_NOTCL] This CNCJob object can't be processed because it is a %s "
"CNCJob object."

#: FlatCAMObj.py:5754
msgid "[ERROR_NOTCL] G-code does not have a units code: either G20 or G21"
msgstr "[ERROR_NOTCL] G-code does not have a units code: either G20 or G21"

#: FlatCAMObj.py:5767
msgid ""
"[ERROR_NOTCL] Cancelled. The Toolchange Custom code is enabled but it's "
"empty."
msgstr ""
"[ERROR_NOTCL] Cancelled. The Toolchange Custom code is enabled but it's "
"empty."

#: FlatCAMObj.py:5774
msgid "[success] Toolchange G-code was replaced by a custom code."
msgstr "[success] Toolchange G-code was replaced by a custom code."

#: FlatCAMObj.py:5789 flatcamTools/ToolSolderPaste.py:1390
msgid "[WARNING_NOTCL] No such file or directory"
msgstr "[WARNING_NOTCL] No such file or directory"

#: FlatCAMObj.py:5809 FlatCAMObj.py:5821
msgid ""
"[WARNING_NOTCL] The used postprocessor file has to have in it's name: "
"'toolchange_custom'"
msgstr ""
"[WARNING_NOTCL] The used postprocessor file has to have in it's name: "
"'toolchange_custom'"

#: FlatCAMObj.py:5827
msgid "[ERROR] There is no postprocessor file."
msgstr "[ERROR] There is no postprocessor file."

#: ObjectCollection.py:419
#, python-brace-format
msgid "Object renamed from <b>{old}</b> to <b>{new}</b>"
msgstr "Object renamed from <b>{old}</b> to <b>{new}</b>"

#: ObjectCollection.py:757
#, python-format
msgid "[ERROR] Cause of error: %s"
msgstr "[ERROR] Cause of error: %s"

#: camlib.py:202
msgid "[ERROR_NOTCL] self.solid_geometry is neither BaseGeometry or list."
msgstr "[ERROR_NOTCL] self.solid_geometry is neither BaseGeometry or list."

#: camlib.py:1390
msgid "[success] Object was mirrored ..."
msgstr "[success] Object was mirrored ..."

#: camlib.py:1392
msgid "[ERROR_NOTCL] Failed to mirror. No object selected"
msgstr "[ERROR_NOTCL] Failed to mirror. No object selected"

#: camlib.py:1428
msgid "[success] Object was rotated ..."
msgstr "[success] Object was rotated ..."

#: camlib.py:1430
msgid "[ERROR_NOTCL] Failed to rotate. No object selected"
msgstr "[ERROR_NOTCL] Failed to rotate. No object selected"

#: camlib.py:1464
msgid "[success] Object was skewed ..."
msgstr "[success] Object was skewed ..."

#: camlib.py:1466
msgid "[ERROR_NOTCL] Failed to skew. No object selected"
msgstr "[ERROR_NOTCL] Failed to skew. No object selected"

#: camlib.py:2728 camlib.py:2813
#, python-format
msgid "[WARNING] Coordinates missing, line ignored: %s"
msgstr "[WARNING] Coordinates missing, line ignored: %s"

#: camlib.py:2729 camlib.py:2814
msgid "[WARNING_NOTCL] GERBER file might be CORRUPT. Check the file !!!"
msgstr "[WARNING_NOTCL] GERBER file might be CORRUPT. Check the file !!!"

#: camlib.py:2778
#, python-format
msgid ""
"[ERROR] Region does not have enough points. File will be processed but there "
"are parser errors. Line number: %s"
msgstr ""
"[ERROR] Region does not have enough points. File will be processed but there "
"are parser errors. Line number: %s"

#: camlib.py:3170
#, python-format
msgid ""
"[ERROR]Gerber Parser ERROR.\n"
"%s:"
msgstr ""
"[ERROR]Gerber Parser ERROR.\n"
"%s:"

#: camlib.py:3392
msgid "[success] Gerber Scale done."
msgstr "[success] Gerber Scale done."

#: camlib.py:3458
msgid "[success] Gerber Offset done."
msgstr "[success] Gerber Offset done."

#: camlib.py:3512
#| msgid "[success] Gerber Scale done."
msgid "[success] Gerber Mirror done."
msgstr "[success] Gerber Mirror done."

#: camlib.py:3558
#| msgid "[success] Gerber Scale done."
msgid "[success] Gerber Skew done."
msgstr "[success] Gerber Skew done."

#: camlib.py:3596
#| msgid "[success] Gerber Scale done."
msgid "[success] Gerber Rotate done."
msgstr "[success] Gerber Rotate done."

#: camlib.py:3875
#, python-format
msgid "[ERROR_NOTCL] This is GCODE mark: %s"
msgstr "[ERROR_NOTCL] This is GCODE mark: %s"

#: camlib.py:3989
#, python-format
msgid ""
"[WARNING] No tool diameter info's. See shell.\n"
"A tool change event: T%s was found but the Excellon file have no "
"informations regarding the tool diameters therefore the application will try "
"to load it by using some 'fake' diameters.\n"
"The user needs to edit the resulting Excellon object and change the "
"diameters to reflect the real diameters."
msgstr ""
"[WARNING] No tool diameter info's. See shell.\n"
"A tool change event: T%s was found but the Excellon file have no "
"informations regarding the tool diameters therefore the application will try "
"to load it by using some 'fake' diameters.\n"
"The user needs to edit the resulting Excellon object and change the "
"diameters to reflect the real diameters."

#: camlib.py:4454
#, python-brace-format
msgid ""
"[ERROR] Excellon Parser error.\n"
"Parsing Failed. Line {l_nr}: {line}\n"
msgstr ""
"[ERROR] Excellon Parser error.\n"
"Parsing Failed. Line {l_nr}: {line}\n"

#: camlib.py:4531
msgid ""
"[WARNING] Excellon.create_geometry() -> a drill location was skipped due of "
"not having a tool associated.\n"
"Check the resulting GCode."
msgstr ""
"[WARNING] Excellon.create_geometry() -> a drill location was skipped due of "
"not having a tool associated.\n"
"Check the resulting GCode."

#: camlib.py:5074
#, python-format
msgid "[ERROR] There is no such parameter: %s"
msgstr "[ERROR] There is no such parameter: %s"

#: camlib.py:5144
msgid ""
"[WARNING] The Cut Z parameter has positive value. It is the depth value to "
"drill into material.\n"
"The Cut Z parameter needs to have a negative value, assuming it is a typo "
"therefore the app will convert the value to negative. Check the resulting "
"CNC code (Gcode etc)."
msgstr ""
"[WARNING] The Cut Z parameter has positive value. It is the depth value to "
"drill into material.\n"
"The Cut Z parameter needs to have a negative value, assuming it is a typo "
"therefore the app will convert the value to negative. Check the resulting "
"CNC code (Gcode etc)."

#: camlib.py:5151 camlib.py:5647 camlib.py:5910
#, python-format
msgid ""
"[WARNING] The Cut Z parameter is zero. There will be no cut, skipping %s file"
msgstr ""
"[WARNING] The Cut Z parameter is zero. There will be no cut, skipping %s file"

#: camlib.py:5380 camlib.py:5477 camlib.py:5535
msgid "[ERROR_NOTCL] The loaded Excellon file has no drills ..."
msgstr "[ERROR_NOTCL] The loaded Excellon file has no drills ..."

#: camlib.py:5482
msgid "[ERROR_NOTCL] Wrong optimization type selected."
msgstr "[ERROR_NOTCL] Wrong optimization type selected."

#: camlib.py:5635 camlib.py:5898
msgid ""
"[ERROR_NOTCL] Cut_Z parameter is None or zero. Most likely a bad "
"combinations of other parameters."
msgstr ""
"[ERROR_NOTCL] Cut_Z parameter is None or zero. Most likely a bad "
"combinations of other parameters."

#: camlib.py:5640 camlib.py:5903
msgid ""
"[WARNING] The Cut Z parameter has positive value. It is the depth value to "
"cut into material.\n"
"The Cut Z parameter needs to have a negative value, assuming it is a typo "
"therefore the app will convert the value to negative.Check the resulting CNC "
"code (Gcode etc)."
msgstr ""
"[WARNING] The Cut Z parameter has positive value. It is the depth value to "
"cut into material.\n"
"The Cut Z parameter needs to have a negative value, assuming it is a typo "
"therefore the app will convert the value to negative.Check the resulting CNC "
"code (Gcode etc)."

#: camlib.py:5652 camlib.py:5915
msgid "[ERROR_NOTCL] Travel Z parameter is None or zero."
msgstr "[ERROR_NOTCL] Travel Z parameter is None or zero."

#: camlib.py:5656 camlib.py:5919
msgid ""
"[WARNING] The Travel Z parameter has negative value. It is the height value "
"to travel between cuts.\n"
"The Z Travel parameter needs to have a positive value, assuming it is a typo "
"therefore the app will convert the value to positive.Check the resulting CNC "
"code (Gcode etc)."
msgstr ""
"[WARNING] The Travel Z parameter has negative value. It is the height value "
"to travel between cuts.\n"
"The Z Travel parameter needs to have a positive value, assuming it is a typo "
"therefore the app will convert the value to positive.Check the resulting CNC "
"code (Gcode etc)."

#: camlib.py:5663 camlib.py:5926
#, python-format
msgid ""
"[WARNING] The Z Travel parameter is zero. This is dangerous, skipping %s file"
msgstr ""
"[WARNING] The Z Travel parameter is zero. This is dangerous, skipping %s file"

#: camlib.py:5793
#, python-format
msgid "[ERROR]Expected a Geometry, got %s"
msgstr "[ERROR]Expected a Geometry, got %s"

#: camlib.py:5799
msgid ""
"[ERROR_NOTCL] Trying to generate a CNC Job from a Geometry object without "
"solid_geometry."
msgstr ""
"[ERROR_NOTCL] Trying to generate a CNC Job from a Geometry object without "
"solid_geometry."

#: camlib.py:5838
msgid ""
"[ERROR_NOTCL] The Tool Offset value is too negative to use for the "
"current_geometry.\n"
"Raise the value (in module) and try again."
msgstr ""
"[ERROR_NOTCL] The Tool Offset value is too negative to use for the "
"current_geometry.\n"
"Raise the value (in module) and try again."

#: camlib.py:6052
msgid "[ERROR_NOTCL] There is no tool data in the SolderPaste geometry."
msgstr "[ERROR_NOTCL] There is no tool data in the SolderPaste geometry."

#: flatcamEditors/FlatCAMExcEditor.py:46
msgid "[WARNING_NOTCL] To add a drill first select a tool"
msgstr "[WARNING_NOTCL] To add a drill first select a tool"

#: flatcamEditors/FlatCAMExcEditor.py:62 flatcamEditors/FlatCAMExcEditor.py:165
#: flatcamEditors/FlatCAMExcEditor.py:447
#: flatcamEditors/FlatCAMExcEditor.py:472
#: flatcamEditors/FlatCAMGrbEditor.py:451
#: flatcamEditors/FlatCAMGrbEditor.py:1759
#: flatcamEditors/FlatCAMGrbEditor.py:1787
msgid "Click on target location ..."
msgstr "Click on target location ..."

#: flatcamEditors/FlatCAMExcEditor.py:108
msgid "[success] Done. Drill added."
msgstr "[success] Done. Drill added."

#: flatcamEditors/FlatCAMExcEditor.py:150
msgid "[WARNING_NOTCL] To add an Drill Array first select a tool in Tool Table"
msgstr ""
"[WARNING_NOTCL] To add an Drill Array first select a tool in Tool Table"

#: flatcamEditors/FlatCAMExcEditor.py:182
msgid "Click on the Drill Circular Array Start position"
msgstr "Click on the Drill Circular Array Start position"

#: flatcamEditors/FlatCAMExcEditor.py:204
#: flatcamEditors/FlatCAMGrbEditor.py:494
msgid ""
"[ERROR_NOTCL] The value is not Float. Check for comma instead of dot "
"separator."
msgstr ""
"[ERROR_NOTCL] The value is not Float. Check for comma instead of dot "
"separator."

#: flatcamEditors/FlatCAMExcEditor.py:207
#: flatcamEditors/FlatCAMGrbEditor.py:497
msgid "[ERROR_NOTCL] The value is mistyped. Check the value."
msgstr "[ERROR_NOTCL] The value is mistyped. Check the value."

#: flatcamEditors/FlatCAMExcEditor.py:305
msgid "[WARNING_NOTCL] Too many drills for the selected spacing angle."
msgstr "[WARNING_NOTCL] Too many drills for the selected spacing angle."

#: flatcamEditors/FlatCAMExcEditor.py:322
msgid "[success] Done. Drill Array added."
msgstr "[success] Done. Drill Array added."

#: flatcamEditors/FlatCAMExcEditor.py:333
msgid "Click on the Drill(s) to resize ..."
msgstr "Click on the Drill(s) to resize ..."

#: flatcamEditors/FlatCAMExcEditor.py:353
msgid ""
"[ERROR_NOTCL] Resize drill(s) failed. Please enter a diameter for resize."
msgstr ""
"[ERROR_NOTCL] Resize drill(s) failed. Please enter a diameter for resize."

#: flatcamEditors/FlatCAMExcEditor.py:423
msgid "[success] Done. Drill Resize completed."
msgstr "[success] Done. Drill Resize completed."

#: flatcamEditors/FlatCAMExcEditor.py:426
msgid "[WARNING_NOTCL] Cancelled. No drills selected for resize ..."
msgstr "[WARNING_NOTCL] Cancelled. No drills selected for resize ..."

#: flatcamEditors/FlatCAMExcEditor.py:449
#: flatcamEditors/FlatCAMGrbEditor.py:1761
msgid "Click on reference location ..."
msgstr "Click on reference location ..."

#: flatcamEditors/FlatCAMExcEditor.py:504
msgid "[success] Done. Drill(s) Move completed."
msgstr "[success] Done. Drill(s) Move completed."

#: flatcamEditors/FlatCAMExcEditor.py:557
msgid "[success] Done. Drill(s) copied."
msgstr "[success] Done. Drill(s) copied."

#: flatcamEditors/FlatCAMExcEditor.py:758
msgid "Excellon Editor"
msgstr "Excellon Editor"

#: flatcamEditors/FlatCAMExcEditor.py:765
#: flatcamEditors/FlatCAMGrbEditor.py:2108
msgid "Name:"
msgstr "Name:"

#: flatcamEditors/FlatCAMExcEditor.py:771 flatcamTools/ToolNonCopperClear.py:72
#: flatcamTools/ToolPaint.py:69 flatcamTools/ToolSolderPaste.py:70
msgid "Tools Table"
msgstr "Tools Table"

#: flatcamEditors/FlatCAMExcEditor.py:773 flatcamGUI/ObjectUI.py:538
msgid ""
"Tools in this Excellon object\n"
"when are used for drilling."
msgstr ""
"Tools in this Excellon object\n"
"when are used for drilling."

#: flatcamEditors/FlatCAMExcEditor.py:793
msgid "Add/Delete Tool"
msgstr "Add/Delete Tool"

#: flatcamEditors/FlatCAMExcEditor.py:795
msgid ""
"Add/Delete a tool to the tool list\n"
"for this Excellon object."
msgstr ""
"Add/Delete a tool to the tool list\n"
"for this Excellon object."

#: flatcamEditors/FlatCAMExcEditor.py:803 flatcamTools/ToolCutOut.py:77
msgid "Tool Dia:"
msgstr "Tool Dia:"

#: flatcamEditors/FlatCAMExcEditor.py:805 flatcamGUI/ObjectUI.py:978
msgid "Diameter for the new tool"
msgstr "Diameter for the new tool"

#: flatcamEditors/FlatCAMExcEditor.py:814
msgid "Add Tool"
msgstr "Add Tool"

#: flatcamEditors/FlatCAMExcEditor.py:816
msgid ""
"Add a new tool to the tool list\n"
"with the diameter specified above."
msgstr ""
"Add a new tool to the tool list\n"
"with the diameter specified above."

#: flatcamEditors/FlatCAMExcEditor.py:826
msgid "Delete Tool"
msgstr "Delete Tool"

#: flatcamEditors/FlatCAMExcEditor.py:828
msgid ""
"Delete a tool in the tool list\n"
"by selecting a row in the tool table."
msgstr ""
"Delete a tool in the tool list\n"
"by selecting a row in the tool table."

#: flatcamEditors/FlatCAMExcEditor.py:846
msgid "Resize Drill(s)"
msgstr "Resize Drill(s)"

#: flatcamEditors/FlatCAMExcEditor.py:848
msgid "Resize a drill or a selection of drills."
msgstr "Resize a drill or a selection of drills."

#: flatcamEditors/FlatCAMExcEditor.py:855
msgid "Resize Dia:"
msgstr "Resize Dia:"

#: flatcamEditors/FlatCAMExcEditor.py:857
msgid "Diameter to resize to."
msgstr "Diameter to resize to."

#: flatcamEditors/FlatCAMExcEditor.py:865
msgid "Resize"
msgstr "Resize"

#: flatcamEditors/FlatCAMExcEditor.py:867
msgid "Resize drill(s)"
msgstr "Resize drill(s)"

#: flatcamEditors/FlatCAMExcEditor.py:889 flatcamGUI/FlatCAMGUI.py:1612
msgid "Add Drill Array"
msgstr "Add Drill Array"

#: flatcamEditors/FlatCAMExcEditor.py:891
msgid "Add an array of drills (linear or circular array)"
msgstr "Add an array of drills (linear or circular array)"

#: flatcamEditors/FlatCAMExcEditor.py:897
msgid ""
"Select the type of drills array to create.\n"
"It can be Linear X(Y) or Circular"
msgstr ""
"Select the type of drills array to create.\n"
"It can be Linear X(Y) or Circular"

#: flatcamEditors/FlatCAMExcEditor.py:900
#: flatcamEditors/FlatCAMGrbEditor.py:2341
msgid "Linear"
msgstr "Linear"

#: flatcamEditors/FlatCAMExcEditor.py:901
#: flatcamEditors/FlatCAMGrbEditor.py:2342
msgid "Circular"
msgstr "Circular"

#: flatcamEditors/FlatCAMExcEditor.py:908
msgid "Nr of drills:"
msgstr "Nr of drills:"

#: flatcamEditors/FlatCAMExcEditor.py:910
msgid "Specify how many drills to be in the array."
msgstr "Specify how many drills to be in the array."

#: flatcamEditors/FlatCAMExcEditor.py:927
#: flatcamEditors/FlatCAMExcEditor.py:972
#: flatcamEditors/FlatCAMGrbEditor.py:2368
#: flatcamEditors/FlatCAMGrbEditor.py:2413
msgid "Direction:"
msgstr "Direction:"

#: flatcamEditors/FlatCAMExcEditor.py:929
#: flatcamEditors/FlatCAMGrbEditor.py:2370
msgid ""
"Direction on which the linear array is oriented:\n"
"- 'X' - horizontal axis \n"
"- 'Y' - vertical axis or \n"
"- 'Angle' - a custom angle for the array inclination"
msgstr ""
"Direction on which the linear array is oriented:\n"
"- 'X' - horizontal axis \n"
"- 'Y' - vertical axis or \n"
"- 'Angle' - a custom angle for the array inclination"

#: flatcamEditors/FlatCAMExcEditor.py:942
#: flatcamEditors/FlatCAMGrbEditor.py:2383
msgid "Pitch:"
msgstr "Pitch:"

#: flatcamEditors/FlatCAMExcEditor.py:944
#: flatcamEditors/FlatCAMGrbEditor.py:2385
msgid "Pitch = Distance between elements of the array."
msgstr "Pitch = Distance between elements of the array."

#: flatcamEditors/FlatCAMExcEditor.py:951
#: flatcamEditors/FlatCAMExcEditor.py:987
#: flatcamEditors/FlatCAMGeoEditor.py:666
#: flatcamEditors/FlatCAMGrbEditor.py:2392
#: flatcamEditors/FlatCAMGrbEditor.py:2428
#: flatcamEditors/FlatCAMGrbEditor.py:4414 flatcamTools/ToolTransform.py:68
msgid "Angle:"
msgstr "Angle:"

#: flatcamEditors/FlatCAMExcEditor.py:953
#: flatcamEditors/FlatCAMGrbEditor.py:2394
msgid ""
"Angle at which the linear array is placed.\n"
"The precision is of max 2 decimals.\n"
"Min value is: -359.99 degrees.\n"
"Max value is:  360.00 degrees."
msgstr ""
"Angle at which the linear array is placed.\n"
"The precision is of max 2 decimals.\n"
"Min value is: -359.99 degrees.\n"
"Max value is:  360.00 degrees."

#: flatcamEditors/FlatCAMExcEditor.py:974
#: flatcamEditors/FlatCAMGrbEditor.py:2415
msgid ""
"Direction for circular array.Can be CW = clockwise or CCW = counter "
"clockwise."
msgstr ""
"Direction for circular array.Can be CW = clockwise or CCW = counter "
"clockwise."

#: flatcamEditors/FlatCAMExcEditor.py:989
#: flatcamEditors/FlatCAMGrbEditor.py:2430
msgid "Angle at which each element in circular array is placed."
msgstr "Angle at which each element in circular array is placed."

#: flatcamEditors/FlatCAMExcEditor.py:1452
msgid ""
"[WARNING_NOTCL] Tool already in the original or actual tool list.\n"
"Save and reedit Excellon if you need to add this tool. "
msgstr ""
"[WARNING_NOTCL] Tool already in the original or actual tool list.\n"
"Save and reedit Excellon if you need to add this tool. "

#: flatcamEditors/FlatCAMExcEditor.py:1461 flatcamGUI/FlatCAMGUI.py:2995
#, python-brace-format
msgid "[success] Added new tool with dia: {dia} {units}"
msgstr "[success] Added new tool with dia: {dia} {units}"

#: flatcamEditors/FlatCAMExcEditor.py:1493
msgid "[WARNING_NOTCL] Select a tool in Tool Table"
msgstr "[WARNING_NOTCL] Select a tool in Tool Table"

#: flatcamEditors/FlatCAMExcEditor.py:1526
#, python-brace-format
msgid "[success] Deleted tool with dia: {del_dia} {units}"
msgstr "[success] Deleted tool with dia: {del_dia} {units}"

#: flatcamEditors/FlatCAMExcEditor.py:2038
msgid ""
"[ERROR_NOTCL] There are no Tools definitions in the file. Aborting Excellon "
"creation."
msgstr ""
"[ERROR_NOTCL] There are no Tools definitions in the file. Aborting Excellon "
"creation."

#: flatcamEditors/FlatCAMExcEditor.py:2047
msgid "Creating Excellon."
msgstr "Creating Excellon."

#: flatcamEditors/FlatCAMExcEditor.py:2056
msgid "[success] Excellon editing finished."
msgstr "[success] Excellon editing finished."

#: flatcamEditors/FlatCAMExcEditor.py:2073
msgid "[WARNING_NOTCL] Cancelled. There is no Tool/Drill selected"
msgstr "[WARNING_NOTCL] Cancelled. There is no Tool/Drill selected"

#: flatcamEditors/FlatCAMExcEditor.py:2605
msgid "[success] Done. Drill(s) deleted."
msgstr "[success] Done. Drill(s) deleted."

#: flatcamEditors/FlatCAMExcEditor.py:2675
#: flatcamEditors/FlatCAMGrbEditor.py:4174
msgid "Click on the circular array Center position"
msgstr "Click on the circular array Center position"

#: flatcamEditors/FlatCAMGeoEditor.py:80
#: flatcamEditors/FlatCAMGrbEditor.py:2258
msgid "Buffer distance:"
msgstr "Buffer distance:"

#: flatcamEditors/FlatCAMGeoEditor.py:81
#: flatcamEditors/FlatCAMGrbEditor.py:2259
msgid "Buffer corner:"
msgstr "Buffer corner:"

#: flatcamEditors/FlatCAMGeoEditor.py:83
msgid ""
"There are 3 types of corners:\n"
" - 'Round': the corner is rounded for exterior buffer.\n"
" - 'Square:' the corner is met in a sharp angle for exterior buffer.\n"
" - 'Beveled:' the corner is a line that directly connects the features "
"meeting in the corner"
msgstr ""
"There are 3 types of corners:\n"
" - 'Round': the corner is rounded for exterior buffer.\n"
" - 'Square:' the corner is met in a sharp angle for exterior buffer.\n"
" - 'Beveled:' the corner is a line that directly connects the features "
"meeting in the corner"

#: flatcamEditors/FlatCAMGeoEditor.py:89
#: flatcamEditors/FlatCAMGrbEditor.py:2267
msgid "Round"
msgstr "Round"

#: flatcamEditors/FlatCAMGeoEditor.py:90
#: flatcamEditors/FlatCAMGrbEditor.py:2268
msgid "Square"
msgstr "Square"

#: flatcamEditors/FlatCAMGeoEditor.py:91
#: flatcamEditors/FlatCAMGrbEditor.py:2269
msgid "Beveled"
msgstr "Beveled"

#: flatcamEditors/FlatCAMGeoEditor.py:98
msgid "Buffer Interior"
msgstr "Buffer Interior"

#: flatcamEditors/FlatCAMGeoEditor.py:100
msgid "Buffer Exterior"
msgstr "Buffer Exterior"

#: flatcamEditors/FlatCAMGeoEditor.py:106
msgid "Full Buffer"
msgstr "Full Buffer"

#: flatcamEditors/FlatCAMGeoEditor.py:127
#: flatcamEditors/FlatCAMGeoEditor.py:2696
msgid "Buffer Tool"
msgstr "Buffer Tool"

#: flatcamEditors/FlatCAMGeoEditor.py:138
#: flatcamEditors/FlatCAMGeoEditor.py:155
#: flatcamEditors/FlatCAMGeoEditor.py:172
#: flatcamEditors/FlatCAMGeoEditor.py:2714
#: flatcamEditors/FlatCAMGeoEditor.py:2740
#: flatcamEditors/FlatCAMGeoEditor.py:2766
#: flatcamEditors/FlatCAMGrbEditor.py:4226
msgid ""
"[WARNING_NOTCL] Buffer distance value is missing or wrong format. Add it and "
"retry."
msgstr ""
"[WARNING_NOTCL] Buffer distance value is missing or wrong format. Add it and "
"retry."

#: flatcamEditors/FlatCAMGeoEditor.py:343
msgid "Text Tool"
msgstr "Text Tool"

#: flatcamEditors/FlatCAMGeoEditor.py:401 flatcamGUI/FlatCAMGUI.py:805
msgid "Tool"
msgstr "Tool"

#: flatcamEditors/FlatCAMGeoEditor.py:432 flatcamGUI/FlatCAMGUI.py:4051
#: flatcamGUI/FlatCAMGUI.py:5448 flatcamGUI/FlatCAMGUI.py:5724
#: flatcamGUI/FlatCAMGUI.py:5864 flatcamGUI/ObjectUI.py:260
msgid "Tool dia:"
msgstr "Tool dia:"

#: flatcamEditors/FlatCAMGeoEditor.py:434 flatcamGUI/FlatCAMGUI.py:5866
msgid ""
"Diameter of the tool to\n"
"be used in the operation."
msgstr ""
"Diameter of the tool to\n"
"be used in the operation."

#: flatcamEditors/FlatCAMGeoEditor.py:443 flatcamGUI/FlatCAMGUI.py:5630
#: flatcamGUI/FlatCAMGUI.py:5875 flatcamTools/ToolNonCopperClear.py:165
#: flatcamTools/ToolPaint.py:160
msgid "Overlap Rate:"
msgstr "Overlap Rate:"

#: flatcamEditors/FlatCAMGeoEditor.py:445 flatcamTools/ToolPaint.py:162
#, python-format
msgid ""
"How much (fraction) of the tool width to overlap each tool pass.\n"
"Example:\n"
"A value here of 0.25 means 25% from the tool diameter found above.\n"
"\n"
"Adjust the value starting with lower values\n"
"and increasing it if areas that should be painted are still \n"
"not painted.\n"
"Lower values = faster processing, faster execution on PCB.\n"
"Higher values = slow processing and slow execution on CNC\n"
"due of too many paths."
msgstr ""
"How much (fraction) of the tool width to overlap each tool pass.\n"
"Example:\n"
"A value here of 0.25 means 25% from the tool diameter found above.\n"
"\n"
"Adjust the value starting with lower values\n"
"and increasing it if areas that should be painted are still \n"
"not painted.\n"
"Lower values = faster processing, faster execution on PCB.\n"
"Higher values = slow processing and slow execution on CNC\n"
"due of too many paths."

#: flatcamEditors/FlatCAMGeoEditor.py:461 flatcamGUI/FlatCAMGUI.py:5646
#: flatcamGUI/FlatCAMGUI.py:5732 flatcamGUI/FlatCAMGUI.py:5885
#: flatcamTools/ToolCutOut.py:86 flatcamTools/ToolNonCopperClear.py:181
#: flatcamTools/ToolPaint.py:177
msgid "Margin:"
msgstr "Margin:"

#: flatcamEditors/FlatCAMGeoEditor.py:463 flatcamGUI/FlatCAMGUI.py:5887
#: flatcamTools/ToolPaint.py:179
msgid ""
"Distance by which to avoid\n"
"the edges of the polygon to\n"
"be painted."
msgstr ""
"Distance by which to avoid\n"
"the edges of the polygon to\n"
"be painted."

#: flatcamEditors/FlatCAMGeoEditor.py:472 flatcamGUI/FlatCAMGUI.py:5655
#: flatcamGUI/FlatCAMGUI.py:5896 flatcamTools/ToolNonCopperClear.py:190
#: flatcamTools/ToolPaint.py:188
msgid "Method:"
msgstr "Method:"

#: flatcamEditors/FlatCAMGeoEditor.py:474 flatcamGUI/FlatCAMGUI.py:5898
msgid ""
"Algorithm to paint the polygon:<BR><B>Standard</B>: Fixed step inwards."
"<BR><B>Seed-based</B>: Outwards from seed."
msgstr ""
"Algorithm to paint the polygon:<BR><B>Standard</B>: Fixed step inwards."
"<BR><B>Seed-based</B>: Outwards from seed."

#: flatcamEditors/FlatCAMGeoEditor.py:487 flatcamGUI/FlatCAMGUI.py:5671
#: flatcamGUI/FlatCAMGUI.py:5911 flatcamTools/ToolNonCopperClear.py:206
#: flatcamTools/ToolPaint.py:204
msgid "Connect:"
msgstr "Connect:"

#: flatcamEditors/FlatCAMGeoEditor.py:489 flatcamGUI/FlatCAMGUI.py:5673
#: flatcamGUI/FlatCAMGUI.py:5913 flatcamTools/ToolNonCopperClear.py:208
#: flatcamTools/ToolPaint.py:206
msgid ""
"Draw lines between resulting\n"
"segments to minimize tool lifts."
msgstr ""
"Draw lines between resulting\n"
"segments to minimize tool lifts."

#: flatcamEditors/FlatCAMGeoEditor.py:496 flatcamGUI/FlatCAMGUI.py:5680
#: flatcamGUI/FlatCAMGUI.py:5921 flatcamTools/ToolNonCopperClear.py:215
#: flatcamTools/ToolPaint.py:213
msgid "Contour:"
msgstr "Contour:"

#: flatcamEditors/FlatCAMGeoEditor.py:498 flatcamGUI/FlatCAMGUI.py:5682
#: flatcamGUI/FlatCAMGUI.py:5923 flatcamTools/ToolNonCopperClear.py:217
#: flatcamTools/ToolPaint.py:215
msgid ""
"Cut around the perimeter of the polygon\n"
"to trim rough edges."
msgstr ""
"Cut around the perimeter of the polygon\n"
"to trim rough edges."

#: flatcamEditors/FlatCAMGeoEditor.py:510
msgid "Paint"
msgstr "Paint"

#: flatcamEditors/FlatCAMGeoEditor.py:528 flatcamGUI/FlatCAMGUI.py:648
#: flatcamGUI/FlatCAMGUI.py:1865 flatcamGUI/ObjectUI.py:1314
#: flatcamTools/ToolPaint.py:341
msgid "Paint Tool"
msgstr "Paint Tool"

#: flatcamEditors/FlatCAMGeoEditor.py:564
msgid "[WARNING_NOTCL] Paint cancelled. No shape selected."
msgstr "[WARNING_NOTCL] Paint cancelled. No shape selected."

#: flatcamEditors/FlatCAMGeoEditor.py:575 flatcamTools/ToolCutOut.py:355
#: flatcamTools/ToolCutOut.py:512 flatcamTools/ToolCutOut.py:651
#: flatcamTools/ToolCutOut.py:756 flatcamTools/ToolDblSided.py:363
msgid ""
"[WARNING_NOTCL] Tool diameter value is missing or wrong format. Add it and "
"retry."
msgstr ""
"[WARNING_NOTCL] Tool diameter value is missing or wrong format. Add it and "
"retry."

#: flatcamEditors/FlatCAMGeoEditor.py:586
msgid ""
"[WARNING_NOTCL] Overlap value is missing or wrong format. Add it and retry."
msgstr ""
"[WARNING_NOTCL] Overlap value is missing or wrong format. Add it and retry."

#: flatcamEditors/FlatCAMGeoEditor.py:598
msgid ""
"[WARNING_NOTCL] Margin distance value is missing or wrong format. Add it and "
"retry."
msgstr ""
"[WARNING_NOTCL] Margin distance value is missing or wrong format. Add it and "
"retry."

#: flatcamEditors/FlatCAMGeoEditor.py:607
#: flatcamEditors/FlatCAMGeoEditor.py:2721
#: flatcamEditors/FlatCAMGeoEditor.py:2747
#: flatcamEditors/FlatCAMGeoEditor.py:2773
#: flatcamTools/ToolNonCopperClear.py:813 flatcamTools/ToolProperties.py:104
msgid "Tools"
msgstr "Tools"

#: flatcamEditors/FlatCAMGeoEditor.py:618
#: flatcamEditors/FlatCAMGeoEditor.py:991
#: flatcamEditors/FlatCAMGrbEditor.py:4365
#: flatcamEditors/FlatCAMGrbEditor.py:4750 flatcamGUI/FlatCAMGUI.py:659
#: flatcamGUI/FlatCAMGUI.py:1878 flatcamTools/ToolTransform.py:398
msgid "Transform Tool"
msgstr "Transform Tool"

#: flatcamEditors/FlatCAMGeoEditor.py:619
#: flatcamEditors/FlatCAMGeoEditor.py:680
#: flatcamEditors/FlatCAMGrbEditor.py:4366
#: flatcamEditors/FlatCAMGrbEditor.py:4428 flatcamTools/ToolTransform.py:24
#: flatcamTools/ToolTransform.py:82
msgid "Rotate"
msgstr "Rotate"

#: flatcamEditors/FlatCAMGeoEditor.py:620
#: flatcamEditors/FlatCAMGrbEditor.py:4367 flatcamTools/ToolTransform.py:25
msgid "Skew/Shear"
msgstr "Skew/Shear"

#: flatcamEditors/FlatCAMGeoEditor.py:621
#: flatcamEditors/FlatCAMGrbEditor.py:2313
#: flatcamEditors/FlatCAMGrbEditor.py:4368 flatcamGUI/FlatCAMGUI.py:722
#: flatcamGUI/FlatCAMGUI.py:1944 flatcamGUI/ObjectUI.py:100
#: flatcamTools/ToolTransform.py:26
msgid "Scale"
msgstr "Scale"

#: flatcamEditors/FlatCAMGeoEditor.py:622
#: flatcamEditors/FlatCAMGrbEditor.py:4369 flatcamTools/ToolTransform.py:27
msgid "Mirror (Flip)"
msgstr "Mirror (Flip)"

#: flatcamEditors/FlatCAMGeoEditor.py:623
#: flatcamEditors/FlatCAMGrbEditor.py:4370 flatcamGUI/ObjectUI.py:127
#: flatcamGUI/ObjectUI.py:891 flatcamGUI/ObjectUI.py:1452
#: flatcamTools/ToolTransform.py:28
msgid "Offset"
msgstr "Offset"

#: flatcamEditors/FlatCAMGeoEditor.py:634
#: flatcamEditors/FlatCAMGrbEditor.py:4382
#, python-format
msgid "Editor %s"
msgstr "Editor %s"

#: flatcamEditors/FlatCAMGeoEditor.py:668
#: flatcamEditors/FlatCAMGrbEditor.py:4416 flatcamTools/ToolTransform.py:70
msgid ""
"Angle for Rotation action, in degrees.\n"
"Float number between -360 and 359.\n"
"Positive numbers for CW motion.\n"
"Negative numbers for CCW motion."
msgstr ""
"Angle for Rotation action, in degrees.\n"
"Float number between -360 and 359.\n"
"Positive numbers for CW motion.\n"
"Negative numbers for CCW motion."

#: flatcamEditors/FlatCAMGeoEditor.py:682
#: flatcamEditors/FlatCAMGrbEditor.py:4430
msgid ""
"Rotate the selected shape(s).\n"
"The point of reference is the middle of\n"
"the bounding box for all selected shapes."
msgstr ""
"Rotate the selected shape(s).\n"
"The point of reference is the middle of\n"
"the bounding box for all selected shapes."

#: flatcamEditors/FlatCAMGeoEditor.py:705
#: flatcamEditors/FlatCAMGrbEditor.py:4453 flatcamTools/ToolTransform.py:107
msgid "Angle X:"
msgstr "Angle X:"

#: flatcamEditors/FlatCAMGeoEditor.py:707
#: flatcamEditors/FlatCAMGeoEditor.py:725
#: flatcamEditors/FlatCAMGrbEditor.py:4455
#: flatcamEditors/FlatCAMGrbEditor.py:4473 flatcamTools/ToolTransform.py:109
#: flatcamTools/ToolTransform.py:127
msgid ""
"Angle for Skew action, in degrees.\n"
"Float number between -360 and 359."
msgstr ""
"Angle for Skew action, in degrees.\n"
"Float number between -360 and 359."

#: flatcamEditors/FlatCAMGeoEditor.py:716
#: flatcamEditors/FlatCAMGrbEditor.py:4464 flatcamTools/ToolTransform.py:118
msgid "Skew X"
msgstr "Skew X"

#: flatcamEditors/FlatCAMGeoEditor.py:718
#: flatcamEditors/FlatCAMGeoEditor.py:736
#: flatcamEditors/FlatCAMGrbEditor.py:4466
#: flatcamEditors/FlatCAMGrbEditor.py:4484
msgid ""
"Skew/shear the selected shape(s).\n"
"The point of reference is the middle of\n"
"the bounding box for all selected shapes."
msgstr ""
"Skew/shear the selected shape(s).\n"
"The point of reference is the middle of\n"
"the bounding box for all selected shapes."

#: flatcamEditors/FlatCAMGeoEditor.py:723
#: flatcamEditors/FlatCAMGrbEditor.py:4471 flatcamTools/ToolTransform.py:125
msgid "Angle Y:"
msgstr "Angle Y:"

#: flatcamEditors/FlatCAMGeoEditor.py:734
#: flatcamEditors/FlatCAMGrbEditor.py:4482 flatcamTools/ToolTransform.py:136
msgid "Skew Y"
msgstr "Skew Y"

#: flatcamEditors/FlatCAMGeoEditor.py:762
#: flatcamEditors/FlatCAMGrbEditor.py:4510 flatcamTools/ToolTransform.py:164
msgid "Factor X:"
msgstr "Factor X:"

#: flatcamEditors/FlatCAMGeoEditor.py:764
#: flatcamEditors/FlatCAMGrbEditor.py:4512 flatcamTools/ToolTransform.py:166
msgid "Factor for Scale action over X axis."
msgstr "Factor for Scale action over X axis."

#: flatcamEditors/FlatCAMGeoEditor.py:772
#: flatcamEditors/FlatCAMGrbEditor.py:4520 flatcamTools/ToolTransform.py:174
msgid "Scale X"
msgstr "Scale X"

#: flatcamEditors/FlatCAMGeoEditor.py:774
#: flatcamEditors/FlatCAMGeoEditor.py:791
#: flatcamEditors/FlatCAMGrbEditor.py:4522
#: flatcamEditors/FlatCAMGrbEditor.py:4539
msgid ""
"Scale the selected shape(s).\n"
"The point of reference depends on \n"
"the Scale reference checkbox state."
msgstr ""
"Scale the selected shape(s).\n"
"The point of reference depends on \n"
"the Scale reference checkbox state."

#: flatcamEditors/FlatCAMGeoEditor.py:779
#: flatcamEditors/FlatCAMGrbEditor.py:4527 flatcamTools/ToolTransform.py:181
msgid "Factor Y:"
msgstr "Factor Y:"

#: flatcamEditors/FlatCAMGeoEditor.py:781
#: flatcamEditors/FlatCAMGrbEditor.py:4529 flatcamTools/ToolTransform.py:183
msgid "Factor for Scale action over Y axis."
msgstr "Factor for Scale action over Y axis."

#: flatcamEditors/FlatCAMGeoEditor.py:789
#: flatcamEditors/FlatCAMGrbEditor.py:4537 flatcamTools/ToolTransform.py:191
msgid "Scale Y"
msgstr "Scale Y"

#: flatcamEditors/FlatCAMGeoEditor.py:798
#: flatcamEditors/FlatCAMGrbEditor.py:4546 flatcamGUI/FlatCAMGUI.py:6270
#: flatcamTools/ToolTransform.py:200
msgid "Link"
msgstr "Link"

#: flatcamEditors/FlatCAMGeoEditor.py:800
#: flatcamEditors/FlatCAMGrbEditor.py:4548
msgid ""
"Scale the selected shape(s)\n"
"using the Scale Factor X for both axis."
msgstr ""
"Scale the selected shape(s)\n"
"using the Scale Factor X for both axis."

#: flatcamEditors/FlatCAMGeoEditor.py:806
#: flatcamEditors/FlatCAMGrbEditor.py:4554 flatcamGUI/FlatCAMGUI.py:6278
#: flatcamTools/ToolTransform.py:208
msgid "Scale Reference"
msgstr "Scale Reference"

#: flatcamEditors/FlatCAMGeoEditor.py:808
#: flatcamEditors/FlatCAMGrbEditor.py:4556
msgid ""
"Scale the selected shape(s)\n"
"using the origin reference when checked,\n"
"and the center of the biggest bounding box\n"
"of the selected shapes when unchecked."
msgstr ""
"Scale the selected shape(s)\n"
"using the origin reference when checked,\n"
"and the center of the biggest bounding box\n"
"of the selected shapes when unchecked."

#: flatcamEditors/FlatCAMGeoEditor.py:836
#: flatcamEditors/FlatCAMGrbEditor.py:4585 flatcamTools/ToolTransform.py:238
msgid "Value X:"
msgstr "Value X:"

#: flatcamEditors/FlatCAMGeoEditor.py:838
#: flatcamEditors/FlatCAMGrbEditor.py:4587 flatcamTools/ToolTransform.py:240
msgid "Value for Offset action on X axis."
msgstr "Value for Offset action on X axis."

#: flatcamEditors/FlatCAMGeoEditor.py:846
#: flatcamEditors/FlatCAMGrbEditor.py:4595 flatcamTools/ToolTransform.py:248
msgid "Offset X"
msgstr "Offset X"

#: flatcamEditors/FlatCAMGeoEditor.py:848
#: flatcamEditors/FlatCAMGeoEditor.py:866
#: flatcamEditors/FlatCAMGrbEditor.py:4597
#: flatcamEditors/FlatCAMGrbEditor.py:4615
msgid ""
"Offset the selected shape(s).\n"
"The point of reference is the middle of\n"
"the bounding box for all selected shapes.\n"
msgstr ""
"Offset the selected shape(s).\n"
"The point of reference is the middle of\n"
"the bounding box for all selected shapes.\n"

#: flatcamEditors/FlatCAMGeoEditor.py:854
#: flatcamEditors/FlatCAMGrbEditor.py:4603 flatcamTools/ToolTransform.py:255
msgid "Value Y:"
msgstr "Value Y:"

#: flatcamEditors/FlatCAMGeoEditor.py:856
#: flatcamEditors/FlatCAMGrbEditor.py:4605 flatcamTools/ToolTransform.py:257
msgid "Value for Offset action on Y axis."
msgstr "Value for Offset action on Y axis."

#: flatcamEditors/FlatCAMGeoEditor.py:864
#: flatcamEditors/FlatCAMGrbEditor.py:4613 flatcamTools/ToolTransform.py:265
msgid "Offset Y"
msgstr "Offset Y"

#: flatcamEditors/FlatCAMGeoEditor.py:895
#: flatcamEditors/FlatCAMGrbEditor.py:4644 flatcamTools/ToolTransform.py:295
msgid "Flip on X"
msgstr "Flip on X"

#: flatcamEditors/FlatCAMGeoEditor.py:897
#: flatcamEditors/FlatCAMGeoEditor.py:905
#: flatcamEditors/FlatCAMGrbEditor.py:4646
#: flatcamEditors/FlatCAMGrbEditor.py:4654
msgid ""
"Flip the selected shape(s) over the X axis.\n"
"Does not create a new shape."
msgstr ""
"Flip the selected shape(s) over the X axis.\n"
"Does not create a new shape."

#: flatcamEditors/FlatCAMGeoEditor.py:903
#: flatcamEditors/FlatCAMGrbEditor.py:4652 flatcamTools/ToolTransform.py:303
msgid "Flip on Y"
msgstr "Flip on Y"

#: flatcamEditors/FlatCAMGeoEditor.py:912
#: flatcamEditors/FlatCAMGrbEditor.py:4661 flatcamTools/ToolTransform.py:312
msgid "Ref Pt"
msgstr "Ref Pt"

#: flatcamEditors/FlatCAMGeoEditor.py:914
#: flatcamEditors/FlatCAMGrbEditor.py:4663
msgid ""
"Flip the selected shape(s)\n"
"around the point in Point Entry Field.\n"
"\n"
"The point coordinates can be captured by\n"
"left click on canvas together with pressing\n"
"SHIFT key. \n"
"Then click Add button to insert coordinates.\n"
"Or enter the coords in format (x, y) in the\n"
"Point Entry field and click Flip on X(Y)"
msgstr ""
"Flip the selected shape(s)\n"
"around the point in Point Entry Field.\n"
"\n"
"The point coordinates can be captured by\n"
"left click on canvas together with pressing\n"
"SHIFT key. \n"
"Then click Add button to insert coordinates.\n"
"Or enter the coords in format (x, y) in the\n"
"Point Entry field and click Flip on X(Y)"

#: flatcamEditors/FlatCAMGeoEditor.py:926
#: flatcamEditors/FlatCAMGrbEditor.py:4675 flatcamTools/ToolTransform.py:325
msgid "Point:"
msgstr "Point:"

#: flatcamEditors/FlatCAMGeoEditor.py:928
#: flatcamEditors/FlatCAMGrbEditor.py:4677
msgid ""
"Coordinates in format (x, y) used as reference for mirroring.\n"
"The 'x' in (x, y) will be used when using Flip on X and\n"
"the 'y' in (x, y) will be used when using Flip on Y."
msgstr ""
"Coordinates in format (x, y) used as reference for mirroring.\n"
"The 'x' in (x, y) will be used when using Flip on X and\n"
"the 'y' in (x, y) will be used when using Flip on Y."

#: flatcamEditors/FlatCAMGeoEditor.py:940
#: flatcamEditors/FlatCAMGrbEditor.py:4689 flatcamTools/ToolTransform.py:339
msgid ""
"The point coordinates can be captured by\n"
"left click on canvas together with pressing\n"
"SHIFT key. Then click Add button to insert."
msgstr ""
"The point coordinates can be captured by\n"
"left click on canvas together with pressing\n"
"SHIFT key. Then click Add button to insert."

#: flatcamEditors/FlatCAMGeoEditor.py:1055
#: flatcamEditors/FlatCAMGrbEditor.py:4814
msgid "[WARNING_NOTCL] Transformation cancelled. No shape selected."
msgstr "[WARNING_NOTCL] Transformation cancelled. No shape selected."

#: flatcamEditors/FlatCAMGeoEditor.py:1076
#: flatcamEditors/FlatCAMGrbEditor.py:4834 flatcamTools/ToolTransform.py:468
msgid "[ERROR_NOTCL] Wrong value format entered for Rotate, use a number."
msgstr "[ERROR_NOTCL] Wrong value format entered for Rotate, use a number."

#: flatcamEditors/FlatCAMGeoEditor.py:1113
#: flatcamEditors/FlatCAMGrbEditor.py:4877 flatcamTools/ToolTransform.py:502
msgid "[ERROR_NOTCL] Wrong value format entered for Skew X, use a number."
msgstr "[ERROR_NOTCL] Wrong value format entered for Skew X, use a number."

#: flatcamEditors/FlatCAMGeoEditor.py:1134
#: flatcamEditors/FlatCAMGrbEditor.py:4904 flatcamTools/ToolTransform.py:520
msgid "[ERROR_NOTCL] Wrong value format entered for Skew Y, use a number."
msgstr "[ERROR_NOTCL] Wrong value format entered for Skew Y, use a number."

#: flatcamEditors/FlatCAMGeoEditor.py:1155
#: flatcamEditors/FlatCAMGrbEditor.py:4931 flatcamTools/ToolTransform.py:538
msgid "[ERROR_NOTCL] Wrong value format entered for Scale X, use a number."
msgstr "[ERROR_NOTCL] Wrong value format entered for Scale X, use a number."

#: flatcamEditors/FlatCAMGeoEditor.py:1192
#: flatcamEditors/FlatCAMGrbEditor.py:4972 flatcamTools/ToolTransform.py:572
msgid "[ERROR_NOTCL] Wrong value format entered for Scale Y, use a number."
msgstr "[ERROR_NOTCL] Wrong value format entered for Scale Y, use a number."

#: flatcamEditors/FlatCAMGeoEditor.py:1224
#: flatcamEditors/FlatCAMGrbEditor.py:5010 flatcamTools/ToolTransform.py:601
msgid "[ERROR_NOTCL] Wrong value format entered for Offset X, use a number."
msgstr "[ERROR_NOTCL] Wrong value format entered for Offset X, use a number."

#: flatcamEditors/FlatCAMGeoEditor.py:1245
#: flatcamEditors/FlatCAMGrbEditor.py:5036 flatcamTools/ToolTransform.py:619
msgid "[ERROR_NOTCL] Wrong value format entered for Offset Y, use a number."
msgstr "[ERROR_NOTCL] Wrong value format entered for Offset Y, use a number."

#: flatcamEditors/FlatCAMGeoEditor.py:1263
#: flatcamEditors/FlatCAMGrbEditor.py:5059
msgid "[WARNING_NOTCL] No shape selected. Please Select a shape to rotate!"
msgstr "[WARNING_NOTCL] No shape selected. Please Select a shape to rotate!"

#: flatcamEditors/FlatCAMGeoEditor.py:1266
#: flatcamEditors/FlatCAMGrbEditor.py:5062 flatcamTools/ToolTransform.py:640
msgid "Appying Rotate"
msgstr "Appying Rotate"

#: flatcamEditors/FlatCAMGeoEditor.py:1294
#: flatcamEditors/FlatCAMGrbEditor.py:5093
msgid "[success] Done. Rotate completed."
msgstr "[success] Done. Rotate completed."

#: flatcamEditors/FlatCAMGeoEditor.py:1310
#: flatcamEditors/FlatCAMGrbEditor.py:5112
msgid "[WARNING_NOTCL] No shape selected. Please Select a shape to flip!"
msgstr "[WARNING_NOTCL] No shape selected. Please Select a shape to flip!"

#: flatcamEditors/FlatCAMGeoEditor.py:1313
#: flatcamEditors/FlatCAMGrbEditor.py:5115 flatcamTools/ToolTransform.py:691
msgid "Applying Flip"
msgstr "Applying Flip"

#: flatcamEditors/FlatCAMGeoEditor.py:1343
#: flatcamEditors/FlatCAMGrbEditor.py:5152 flatcamTools/ToolTransform.py:733
msgid "[success] Flip on the Y axis done ..."
msgstr "[success] Flip on the Y axis done ..."

#: flatcamEditors/FlatCAMGeoEditor.py:1346
#: flatcamEditors/FlatCAMGrbEditor.py:5160 flatcamTools/ToolTransform.py:742
msgid "[success] Flip on the X axis done ..."
msgstr "[success] Flip on the X axis done ..."

#: flatcamEditors/FlatCAMGeoEditor.py:1365
#: flatcamEditors/FlatCAMGrbEditor.py:5180
msgid "[WARNING_NOTCL] No shape selected. Please Select a shape to shear/skew!"
msgstr ""
"[WARNING_NOTCL] No shape selected. Please Select a shape to shear/skew!"

#: flatcamEditors/FlatCAMGeoEditor.py:1368
#: flatcamEditors/FlatCAMGrbEditor.py:5183 flatcamTools/ToolTransform.py:760
msgid "Applying Skew"
msgstr "Applying Skew"

#: flatcamEditors/FlatCAMGeoEditor.py:1393
#: flatcamEditors/FlatCAMGrbEditor.py:5216 flatcamTools/ToolTransform.py:791
#, python-format
msgid "[success] Skew on the %s axis done ..."
msgstr "[success] Skew on the %s axis done ..."

#: flatcamEditors/FlatCAMGeoEditor.py:1397
#: flatcamEditors/FlatCAMGrbEditor.py:5220 flatcamTools/ToolTransform.py:795
#, python-format
msgid "[ERROR_NOTCL] Due of %s, Skew action was not executed."
msgstr "[ERROR_NOTCL] Due of %s, Skew action was not executed."

#: flatcamEditors/FlatCAMGeoEditor.py:1408
#: flatcamEditors/FlatCAMGrbEditor.py:5239
msgid "[WARNING_NOTCL] No shape selected. Please Select a shape to scale!"
msgstr "[WARNING_NOTCL] No shape selected. Please Select a shape to scale!"

#: flatcamEditors/FlatCAMGeoEditor.py:1411
#: flatcamEditors/FlatCAMGrbEditor.py:5242 flatcamTools/ToolTransform.py:809
msgid "Applying Scale"
msgstr "Applying Scale"

#: flatcamEditors/FlatCAMGeoEditor.py:1444
#: flatcamEditors/FlatCAMGrbEditor.py:5278 flatcamTools/ToolTransform.py:848
#, python-format
msgid "[success] Scale on the %s axis done ..."
msgstr "[success] Scale on the %s axis done ..."

#: flatcamEditors/FlatCAMGeoEditor.py:1447
#: flatcamEditors/FlatCAMGrbEditor.py:5281 flatcamTools/ToolTransform.py:851
#, python-format
msgid "[ERROR_NOTCL] Due of %s, Scale action was not executed."
msgstr "[ERROR_NOTCL] Due of %s, Scale action was not executed."

#: flatcamEditors/FlatCAMGeoEditor.py:1456
#: flatcamEditors/FlatCAMGrbEditor.py:5294
msgid "[WARNING_NOTCL] No shape selected. Please Select a shape to offset!"
msgstr "[WARNING_NOTCL] No shape selected. Please Select a shape to offset!"

#: flatcamEditors/FlatCAMGeoEditor.py:1459
#: flatcamEditors/FlatCAMGrbEditor.py:5297 flatcamTools/ToolTransform.py:861
msgid "Applying Offset"
msgstr "Applying Offset"

#: flatcamEditors/FlatCAMGeoEditor.py:1483
#: flatcamEditors/FlatCAMGrbEditor.py:5318 flatcamTools/ToolTransform.py:880
#, python-format
msgid "[success] Offset on the %s axis done ..."
msgstr "[success] Offset on the %s axis done ..."

#: flatcamEditors/FlatCAMGeoEditor.py:1487
#: flatcamEditors/FlatCAMGrbEditor.py:5322 flatcamTools/ToolTransform.py:884
#, python-format
msgid "[ERROR_NOTCL] Due of %s, Offset action was not executed."
msgstr "[ERROR_NOTCL] Due of %s, Offset action was not executed."

#: flatcamEditors/FlatCAMGeoEditor.py:1491
#: flatcamEditors/FlatCAMGrbEditor.py:5326
msgid "Rotate ..."
msgstr "Rotate ..."

#: flatcamEditors/FlatCAMGeoEditor.py:1492
#: flatcamEditors/FlatCAMGeoEditor.py:1549
#: flatcamEditors/FlatCAMGeoEditor.py:1566
#: flatcamEditors/FlatCAMGrbEditor.py:5327
#: flatcamEditors/FlatCAMGrbEditor.py:5384
#: flatcamEditors/FlatCAMGrbEditor.py:5401
msgid "Enter an Angle Value (degrees):"
msgstr "Enter an Angle Value (degrees):"

#: flatcamEditors/FlatCAMGeoEditor.py:1501
#: flatcamEditors/FlatCAMGrbEditor.py:5336
msgid "[success] Geometry shape rotate done..."
msgstr "[success] Geometry shape rotate done..."

#: flatcamEditors/FlatCAMGeoEditor.py:1506
#: flatcamEditors/FlatCAMGrbEditor.py:5341
msgid "[WARNING_NOTCL] Geometry shape rotate cancelled..."
msgstr "[WARNING_NOTCL] Geometry shape rotate cancelled..."

#: flatcamEditors/FlatCAMGeoEditor.py:1512
#: flatcamEditors/FlatCAMGrbEditor.py:5347
msgid "Offset on X axis ..."
msgstr "Offset on X axis ..."

#: flatcamEditors/FlatCAMGeoEditor.py:1513
#: flatcamEditors/FlatCAMGeoEditor.py:1532
#: flatcamEditors/FlatCAMGrbEditor.py:5348
#: flatcamEditors/FlatCAMGrbEditor.py:5367
#, python-format
msgid "Enter a distance Value (%s):"
msgstr "Enter a distance Value (%s):"

#: flatcamEditors/FlatCAMGeoEditor.py:1522
#: flatcamEditors/FlatCAMGrbEditor.py:5357
msgid "[success] Geometry shape offset on X axis done..."
msgstr "[success] Geometry shape offset on X axis done..."

#: flatcamEditors/FlatCAMGeoEditor.py:1526
#: flatcamEditors/FlatCAMGrbEditor.py:5361
msgid "[WARNING_NOTCL] Geometry shape offset X cancelled..."
msgstr "[WARNING_NOTCL] Geometry shape offset X cancelled..."

#: flatcamEditors/FlatCAMGeoEditor.py:1531
#: flatcamEditors/FlatCAMGrbEditor.py:5366
msgid "Offset on Y axis ..."
msgstr "Offset on Y axis ..."

#: flatcamEditors/FlatCAMGeoEditor.py:1541
#: flatcamEditors/FlatCAMGrbEditor.py:5376
msgid "[success] Geometry shape offset on Y axis done..."
msgstr "[success] Geometry shape offset on Y axis done..."

#: flatcamEditors/FlatCAMGeoEditor.py:1545
#: flatcamEditors/FlatCAMGrbEditor.py:5380
msgid "[WARNING_NOTCL] Geometry shape offset Y cancelled..."
msgstr "[WARNING_NOTCL] Geometry shape offset Y cancelled..."

#: flatcamEditors/FlatCAMGeoEditor.py:1548
#: flatcamEditors/FlatCAMGrbEditor.py:5383
msgid "Skew on X axis ..."
msgstr "Skew on X axis ..."

#: flatcamEditors/FlatCAMGeoEditor.py:1558
#: flatcamEditors/FlatCAMGrbEditor.py:5393
msgid "[success] Geometry shape skew on X axis done..."
msgstr "[success] Geometry shape skew on X axis done..."

#: flatcamEditors/FlatCAMGeoEditor.py:1562
#: flatcamEditors/FlatCAMGrbEditor.py:5397
msgid "[WARNING_NOTCL] Geometry shape skew X cancelled..."
msgstr "[WARNING_NOTCL] Geometry shape skew X cancelled..."

#: flatcamEditors/FlatCAMGeoEditor.py:1565
#: flatcamEditors/FlatCAMGrbEditor.py:5400
msgid "Skew on Y axis ..."
msgstr "Skew on Y axis ..."

#: flatcamEditors/FlatCAMGeoEditor.py:1575
#: flatcamEditors/FlatCAMGrbEditor.py:5410
msgid "[success] Geometry shape skew on Y axis done..."
msgstr "[success] Geometry shape skew on Y axis done..."

#: flatcamEditors/FlatCAMGeoEditor.py:1579
#: flatcamEditors/FlatCAMGrbEditor.py:5414
msgid "[WARNING_NOTCL] Geometry shape skew Y cancelled..."
msgstr "[WARNING_NOTCL] Geometry shape skew Y cancelled..."

#: flatcamEditors/FlatCAMGeoEditor.py:1943
#: flatcamEditors/FlatCAMGeoEditor.py:1994
#: flatcamEditors/FlatCAMGrbEditor.py:1351
#: flatcamEditors/FlatCAMGrbEditor.py:1420
msgid "Click on Center point ..."
msgstr "Click on Center point ..."

#: flatcamEditors/FlatCAMGeoEditor.py:1950
#: flatcamEditors/FlatCAMGrbEditor.py:1359
msgid "Click on Perimeter point to complete ..."
msgstr "Click on Perimeter point to complete ..."

#: flatcamEditors/FlatCAMGeoEditor.py:1979
msgid "[success] Done. Adding Circle completed."
msgstr "[success] Done. Adding Circle completed."

#: flatcamEditors/FlatCAMGeoEditor.py:2014
#: flatcamEditors/FlatCAMGrbEditor.py:1445
msgid "Click on Start point ..."
msgstr "Click on Start point ..."

#: flatcamEditors/FlatCAMGeoEditor.py:2016
#: flatcamEditors/FlatCAMGrbEditor.py:1447
msgid "Click on Point3 ..."
msgstr "Click on Point3 ..."

#: flatcamEditors/FlatCAMGeoEditor.py:2018
#: flatcamEditors/FlatCAMGrbEditor.py:1449
msgid "Click on Stop point ..."
msgstr "Click on Stop point ..."

#: flatcamEditors/FlatCAMGeoEditor.py:2023
#: flatcamEditors/FlatCAMGrbEditor.py:1454
msgid "Click on Stop point to complete ..."
msgstr "Click on Stop point to complete ..."

#: flatcamEditors/FlatCAMGeoEditor.py:2025
#: flatcamEditors/FlatCAMGrbEditor.py:1456
msgid "Click on Point2 to complete ..."
msgstr "Click on Point2 to complete ..."

#: flatcamEditors/FlatCAMGeoEditor.py:2027
#: flatcamEditors/FlatCAMGrbEditor.py:1458
msgid "Click on Center point to complete ..."
msgstr "Click on Center point to complete ..."

#: flatcamEditors/FlatCAMGeoEditor.py:2039
#: flatcamEditors/FlatCAMGrbEditor.py:1470
#, python-format
msgid "Direction: %s"
msgstr "Direction: %s"

#: flatcamEditors/FlatCAMGeoEditor.py:2049
#: flatcamEditors/FlatCAMGrbEditor.py:1480
msgid "Mode: Start -> Stop -> Center. Click on Start point ..."
msgstr "Mode: Start -> Stop -> Center. Click on Start point ..."

#: flatcamEditors/FlatCAMGeoEditor.py:2052
#: flatcamEditors/FlatCAMGrbEditor.py:1483
msgid "Mode: Point1 -> Point3 -> Point2. Click on Point1 ..."
msgstr "Mode: Point1 -> Point3 -> Point2. Click on Point1 ..."

#: flatcamEditors/FlatCAMGeoEditor.py:2055
#: flatcamEditors/FlatCAMGrbEditor.py:1486
msgid "Mode: Center -> Start -> Stop. Click on Center point ..."
msgstr "Mode: Center -> Start -> Stop. Click on Center point ..."

#: flatcamEditors/FlatCAMGeoEditor.py:2193
msgid "[success] Done. Arc completed."
msgstr "[success] Done. Arc completed."

#: flatcamEditors/FlatCAMGeoEditor.py:2212
#: flatcamEditors/FlatCAMGeoEditor.py:2265
#: flatcamEditors/FlatCAMGeoEditor.py:2640
msgid "Click on 1st corner ..."
msgstr "Click on 1st corner ..."

#: flatcamEditors/FlatCAMGeoEditor.py:2218
#| msgid "Click on Stop point to complete ..."
msgid "Click on opposite corner to complete ..."
msgstr "Click on opposite corner to complete ..."

#: flatcamEditors/FlatCAMGeoEditor.py:2246
msgid "[success] Done. Rectangle completed."
msgstr "[success] Done. Rectangle completed."

#: flatcamEditors/FlatCAMGeoEditor.py:2272
#| msgid "Click on next Point or click Right mouse button to complete ..."
msgid "Click on next Point or click right mouse button to complete ..."
msgstr "Click on next Point or click right mouse button to complete ..."

#: flatcamEditors/FlatCAMGeoEditor.py:2300
msgid "[success] Done. Polygon completed."
msgstr "[success] Done. Polygon completed."

#: flatcamEditors/FlatCAMGeoEditor.py:2310
#: flatcamEditors/FlatCAMGeoEditor.py:2356
#: flatcamEditors/FlatCAMGrbEditor.py:1055
#: flatcamEditors/FlatCAMGrbEditor.py:1249
msgid "Backtracked one point ..."
msgstr "Backtracked one point ..."

#: flatcamEditors/FlatCAMGeoEditor.py:2338
msgid "[success] Done. Path completed."
msgstr "[success] Done. Path completed."

#: flatcamEditors/FlatCAMGeoEditor.py:2461
#| msgid "[WARNING_NOTCL] No shape selected. Please Select a shape to rotate!"
msgid "[WARNING_NOTCL] MOVE: No shape selected. Select a shape to move ..."
msgstr "[WARNING_NOTCL] MOVE: No shape selected. Select a shape to move ..."

#: flatcamEditors/FlatCAMGeoEditor.py:2463
#: flatcamEditors/FlatCAMGeoEditor.py:2475
#| msgid "Click on reference point."
msgid " MOVE: Click on reference point ..."
msgstr " MOVE: Click on reference point ..."

#: flatcamEditors/FlatCAMGeoEditor.py:2466
#| msgid "Click on destination point."
msgid " Click on destination point ..."
msgstr " Click on destination point ..."

#: flatcamEditors/FlatCAMGeoEditor.py:2500
msgid "[success] Done. Geometry(s) Move completed."
msgstr "[success] Done. Geometry(s) Move completed."

#: flatcamEditors/FlatCAMGeoEditor.py:2620
msgid "[success] Done. Geometry(s) Copy completed."
msgstr "[success] Done. Geometry(s) Copy completed."

#: flatcamEditors/FlatCAMGeoEditor.py:2654
#, python-format
msgid ""
"[ERROR]Font not supported. Only Regular, Bold, Italic and BoldItalic are "
"supported. Error: %s"
msgstr ""
"[ERROR]Font not supported. Only Regular, Bold, Italic and BoldItalic are "
"supported. Error: %s"

#: flatcamEditors/FlatCAMGeoEditor.py:2664
msgid "[success] Done. Adding Text completed."
msgstr "[success] Done. Adding Text completed."

#: flatcamEditors/FlatCAMGeoEditor.py:2692
msgid "Create buffer geometry ..."
msgstr "Create buffer geometry ..."

#: flatcamEditors/FlatCAMGeoEditor.py:2703
#: flatcamEditors/FlatCAMGeoEditor.py:2729
#: flatcamEditors/FlatCAMGeoEditor.py:2755
msgid "[WARNING_NOTCL] Buffer cancelled. No shape selected."
msgstr "[WARNING_NOTCL] Buffer cancelled. No shape selected."

#: flatcamEditors/FlatCAMGeoEditor.py:2725
#: flatcamEditors/FlatCAMGrbEditor.py:4276
msgid "[success] Done. Buffer Tool completed."
msgstr "[success] Done. Buffer Tool completed."

#: flatcamEditors/FlatCAMGeoEditor.py:2751
msgid "[success] Done. Buffer Int Tool completed."
msgstr "[success] Done. Buffer Int Tool completed."

#: flatcamEditors/FlatCAMGeoEditor.py:2777
msgid "[success] Done. Buffer Ext Tool completed."
msgstr "[success] Done. Buffer Ext Tool completed."

#: flatcamEditors/FlatCAMGeoEditor.py:2810
msgid "Create Paint geometry ..."
msgstr "Create Paint geometry ..."

#: flatcamEditors/FlatCAMGeoEditor.py:2824
#: flatcamEditors/FlatCAMGrbEditor.py:2059
msgid "Shape transformations ..."
msgstr "Shape transformations ..."

#: flatcamEditors/FlatCAMGeoEditor.py:3327
#, python-brace-format
msgid "[WARNING] Editing MultiGeo Geometry, tool: {tool} with diameter: {dia}"
msgstr "[WARNING] Editing MultiGeo Geometry, tool: {tool} with diameter: {dia}"

#: flatcamEditors/FlatCAMGeoEditor.py:3703
msgid "[WARNING_NOTCL] Copy cancelled. No shape selected."
msgstr "[WARNING_NOTCL] Copy cancelled. No shape selected."

#: flatcamEditors/FlatCAMGeoEditor.py:3710 flatcamGUI/FlatCAMGUI.py:2725
#: flatcamGUI/FlatCAMGUI.py:2771 flatcamGUI/FlatCAMGUI.py:2789
#: flatcamGUI/FlatCAMGUI.py:2920 flatcamGUI/FlatCAMGUI.py:2932
#: flatcamGUI/FlatCAMGUI.py:2966
msgid "Click on target point."
msgstr "Click on target point."

#: flatcamEditors/FlatCAMGeoEditor.py:3953
#: flatcamEditors/FlatCAMGeoEditor.py:3987
msgid ""
"[WARNING_NOTCL] A selection of at least 2 geo items is required to do "
"Intersection."
msgstr ""
"[WARNING_NOTCL] A selection of at least 2 geo items is required to do "
"Intersection."

#: flatcamEditors/FlatCAMGeoEditor.py:4071
#: flatcamEditors/FlatCAMGeoEditor.py:4108
#: flatcamEditors/FlatCAMGeoEditor.py:4184
msgid ""
"[ERROR_NOTCL] Negative buffer value is not accepted. Use Buffer interior to "
"generate an 'inside' shape"
msgstr ""
"[ERROR_NOTCL] Negative buffer value is not accepted. Use Buffer interior to "
"generate an 'inside' shape"

#: flatcamEditors/FlatCAMGeoEditor.py:4079
#: flatcamEditors/FlatCAMGeoEditor.py:4117
#: flatcamEditors/FlatCAMGeoEditor.py:4192
msgid "[WARNING_NOTCL] Nothing selected for buffering."
msgstr "[WARNING_NOTCL] Nothing selected for buffering."

#: flatcamEditors/FlatCAMGeoEditor.py:4083
#: flatcamEditors/FlatCAMGeoEditor.py:4121
#: flatcamEditors/FlatCAMGeoEditor.py:4196
msgid "[WARNING_NOTCL] Invalid distance for buffering."
msgstr "[WARNING_NOTCL] Invalid distance for buffering."

#: flatcamEditors/FlatCAMGeoEditor.py:4093
#: flatcamEditors/FlatCAMGeoEditor.py:4205
msgid ""
"[ERROR_NOTCL] Failed, the result is empty. Choose a different buffer value."
msgstr ""
"[ERROR_NOTCL] Failed, the result is empty. Choose a different buffer value."

#: flatcamEditors/FlatCAMGeoEditor.py:4101
msgid "[success] Full buffer geometry created."
msgstr "[success] Full buffer geometry created."

#: flatcamEditors/FlatCAMGeoEditor.py:4131
msgid ""
"[ERROR_NOTCL] Failed, the result is empty. Choose a smaller buffer value."
msgstr ""
"[ERROR_NOTCL] Failed, the result is empty. Choose a smaller buffer value."

#: flatcamEditors/FlatCAMGeoEditor.py:4146
msgid "[success] Interior buffer geometry created."
msgstr "[success] Interior buffer geometry created."

#: flatcamEditors/FlatCAMGeoEditor.py:4217
msgid "[success] Exterior buffer geometry created."
msgstr "[success] Exterior buffer geometry created."

#: flatcamEditors/FlatCAMGeoEditor.py:4281
msgid "[WARNING_NOTCL] Nothing selected for painting."
msgstr "[WARNING_NOTCL] Nothing selected for painting."

#: flatcamEditors/FlatCAMGeoEditor.py:4287
msgid "[WARNING] Invalid value for {}"
msgstr "[WARNING] Invalid value for {}"

#: flatcamEditors/FlatCAMGeoEditor.py:4293
msgid ""
"[ERROR_NOTCL] Could not do Paint. Overlap value has to be less than 1.00 "
"(100%)."
msgstr ""
"[ERROR_NOTCL] Could not do Paint. Overlap value has to be less than 1.00 "
"(100%)."

#: flatcamEditors/FlatCAMGeoEditor.py:4352
#, python-format
msgid ""
"[ERROR] Could not do Paint. Try a different combination of parameters. Or a "
"different method of Paint\n"
"%s"
msgstr ""
"[ERROR] Could not do Paint. Try a different combination of parameters. Or a "
"different method of Paint\n"
"%s"

#: flatcamEditors/FlatCAMGeoEditor.py:4363
msgid "[success] Paint done."
msgstr "[success] Paint done."

#: flatcamEditors/FlatCAMGrbEditor.py:200
msgid "[WARNING_NOTCL] To add an Pad first select a aperture in Aperture Table"
msgstr ""
"[WARNING_NOTCL] To add an Pad first select a aperture in Aperture Table"

#: flatcamEditors/FlatCAMGrbEditor.py:206
#: flatcamEditors/FlatCAMGrbEditor.py:398
msgid ""
"[WARNING_NOTCL] Aperture size is zero. It needs to be greater than zero."
msgstr ""
"[WARNING_NOTCL] Aperture size is zero. It needs to be greater than zero."

#: flatcamEditors/FlatCAMGrbEditor.py:229
#: flatcamEditors/FlatCAMGrbEditor.py:234
msgid "Click to place ..."
msgstr "Click to place ..."

#: flatcamEditors/FlatCAMGrbEditor.py:357
#: flatcamEditors/FlatCAMGrbEditor.py:660
msgid ""
"Incompatible aperture type. Select an aperture with type 'C', 'R' or 'O'."
msgstr ""
"Incompatible aperture type. Select an aperture with type 'C', 'R' or 'O'."

#: flatcamEditors/FlatCAMGrbEditor.py:369
msgid "[success] Done. Adding Pad completed."
msgstr "[success] Done. Adding Pad completed."

#: flatcamEditors/FlatCAMGrbEditor.py:391
msgid ""
"[WARNING_NOTCL] To add an Pad Array first select a aperture in Aperture Table"
msgstr ""
"[WARNING_NOTCL] To add an Pad Array first select a aperture in Aperture Table"

#: flatcamEditors/FlatCAMGrbEditor.py:468
msgid "Click on the Pad Circular Array Start position"
msgstr "Click on the Pad Circular Array Start position"

#: flatcamEditors/FlatCAMGrbEditor.py:685
msgid "[WARNING_NOTCL] Too many Pads for the selected spacing angle."
msgstr "[WARNING_NOTCL] Too many Pads for the selected spacing angle."

#: flatcamEditors/FlatCAMGrbEditor.py:707
msgid "[success] Done. Pad Array added."
msgstr "[success] Done. Pad Array added."

#: flatcamEditors/FlatCAMGrbEditor.py:728
msgid "Select shape(s) and then click ..."
msgstr "Select shape(s) and then click ..."

#: flatcamEditors/FlatCAMGrbEditor.py:739
msgid "[ERROR_NOTCL] Failed. Nothing selected."
msgstr "[ERROR_NOTCL] Failed. Nothing selected."

#: flatcamEditors/FlatCAMGrbEditor.py:754
msgid ""
"[WARNING_NOTCL] Failed. Poligonize works only on geometries belonging to the "
"same aperture."
msgstr ""
"[WARNING_NOTCL] Failed. Poligonize works only on geometries belonging to the "
"same aperture."

#: flatcamEditors/FlatCAMGrbEditor.py:807
msgid "[success] Done. Poligonize completed."
msgstr "[success] Done. Poligonize completed."

#: flatcamEditors/FlatCAMGrbEditor.py:857
#: flatcamEditors/FlatCAMGrbEditor.py:1072
#: flatcamEditors/FlatCAMGrbEditor.py:1096
msgid "Corner Mode 1: 45 degrees ..."
msgstr "Corner Mode 1: 45 degrees ..."

#: flatcamEditors/FlatCAMGrbEditor.py:859
msgid "Click on 1st point ..."
msgstr "Click on 1st point ..."

#: flatcamEditors/FlatCAMGrbEditor.py:869
#: flatcamEditors/FlatCAMGrbEditor.py:1167
msgid "Click on next Point or click Right mouse button to complete ..."
msgstr "Click on next Point or click Right mouse button to complete ..."

#: flatcamEditors/FlatCAMGrbEditor.py:1060
#: flatcamEditors/FlatCAMGrbEditor.py:1093
msgid "Corner Mode 2: Reverse 45 degrees ..."
msgstr "Corner Mode 2: Reverse 45 degrees ..."

#: flatcamEditors/FlatCAMGrbEditor.py:1063
#: flatcamEditors/FlatCAMGrbEditor.py:1090
msgid "Corner Mode 3: 90 degrees ..."
msgstr "Corner Mode 3: 90 degrees ..."

#: flatcamEditors/FlatCAMGrbEditor.py:1066
#: flatcamEditors/FlatCAMGrbEditor.py:1087
msgid "Corner Mode 4: Reverse 90 degrees ..."
msgstr "Corner Mode 4: Reverse 90 degrees ..."

#: flatcamEditors/FlatCAMGrbEditor.py:1069
#: flatcamEditors/FlatCAMGrbEditor.py:1084
msgid "Corner Mode 5: Free angle ..."
msgstr "Corner Mode 5: Free angle ..."

#: flatcamEditors/FlatCAMGrbEditor.py:1123
#: flatcamEditors/FlatCAMGrbEditor.py:1281
#: flatcamEditors/FlatCAMGrbEditor.py:1320
msgid "Track Mode 1: 45 degrees ..."
msgstr "Track Mode 1: 45 degrees ..."

#: flatcamEditors/FlatCAMGrbEditor.py:1261
#: flatcamEditors/FlatCAMGrbEditor.py:1315
msgid "Track Mode 2: Reverse 45 degrees ..."
msgstr "Track Mode 2: Reverse 45 degrees ..."

#: flatcamEditors/FlatCAMGrbEditor.py:1266
#: flatcamEditors/FlatCAMGrbEditor.py:1310
msgid "Track Mode 3: 90 degrees ..."
msgstr "Track Mode 3: 90 degrees ..."

#: flatcamEditors/FlatCAMGrbEditor.py:1271
#: flatcamEditors/FlatCAMGrbEditor.py:1305
msgid "Track Mode 4: Reverse 90 degrees ..."
msgstr "Track Mode 4: Reverse 90 degrees ..."

#: flatcamEditors/FlatCAMGrbEditor.py:1276
#: flatcamEditors/FlatCAMGrbEditor.py:1300
msgid "Track Mode 5: Free angle ..."
msgstr "Track Mode 5: Free angle ..."

#: flatcamEditors/FlatCAMGrbEditor.py:1666
msgid "Scale the selected Gerber apertures ..."
msgstr "Scale the selected Gerber apertures ..."

#: flatcamEditors/FlatCAMGrbEditor.py:1708
msgid "Buffer the selected apertures ..."
msgstr "Buffer the selected apertures ..."

#: flatcamEditors/FlatCAMGrbEditor.py:1752
#| msgid "[WARNING_NOTCL] Cancelled. Nothing selected to move."
msgid "[WARNING_NOTCL] Nothing selected to move ..."
msgstr "[WARNING_NOTCL] Nothing selected to move ..."

#: flatcamEditors/FlatCAMGrbEditor.py:1875
msgid "[success] Done. Apertures Move completed."
msgstr "[success] Done. Apertures Move completed."

#: flatcamEditors/FlatCAMGrbEditor.py:1951
msgid "[success] Done. Apertures copied."
msgstr "[success] Done. Apertures copied."

#: flatcamEditors/FlatCAMGrbEditor.py:2101 flatcamGUI/FlatCAMGUI.py:1604
#: flatcamGUI/FlatCAMGUI.py:4322
msgid "Gerber Editor"
msgstr "Gerber Editor"

#: flatcamEditors/FlatCAMGrbEditor.py:2120 flatcamGUI/ObjectUI.py:192
msgid "<b>Apertures:</b>"
msgstr "<b>Apertures:</b>"

#: flatcamEditors/FlatCAMGrbEditor.py:2122 flatcamGUI/ObjectUI.py:194
msgid "Apertures Table for the Gerber Object."
msgstr "Apertures Table for the Gerber Object."

#: flatcamEditors/FlatCAMGrbEditor.py:2133
#: flatcamEditors/FlatCAMGrbEditor.py:3442 flatcamGUI/ObjectUI.py:228
msgid "Code"
msgstr "Code"

#: flatcamEditors/FlatCAMGrbEditor.py:2133
#: flatcamEditors/FlatCAMGrbEditor.py:3442 flatcamGUI/ObjectUI.py:228
#: flatcamGUI/ObjectUI.py:891 flatcamGUI/ObjectUI.py:1452
msgid "Type"
msgstr "Type"

#: flatcamEditors/FlatCAMGrbEditor.py:2133
#: flatcamEditors/FlatCAMGrbEditor.py:3442 flatcamGUI/ObjectUI.py:228
msgid "Size"
msgstr "Size"

#: flatcamEditors/FlatCAMGrbEditor.py:2133
#: flatcamEditors/FlatCAMGrbEditor.py:3442 flatcamGUI/ObjectUI.py:228
msgid "Dim"
msgstr "Dim"

#: flatcamEditors/FlatCAMGrbEditor.py:2137 flatcamGUI/ObjectUI.py:232
msgid "Index"
msgstr "Index"

#: flatcamEditors/FlatCAMGrbEditor.py:2139 flatcamGUI/ObjectUI.py:234
msgid "Aperture Code"
msgstr "Aperture Code"

#: flatcamEditors/FlatCAMGrbEditor.py:2141 flatcamGUI/ObjectUI.py:236
msgid "Type of aperture: circular, rectangle, macros etc"
msgstr "Type of aperture: circular, rectangle, macros etc"

#: flatcamEditors/FlatCAMGrbEditor.py:2143
#: flatcamEditors/FlatCAMGrbEditor.py:2176 flatcamGUI/ObjectUI.py:238
msgid "Aperture Size:"
msgstr "Aperture Size:"

#: flatcamEditors/FlatCAMGrbEditor.py:2145 flatcamGUI/ObjectUI.py:240
msgid ""
"Aperture Dimensions:\n"
" - (width, height) for R, O type.\n"
" - (dia, nVertices) for P type"
msgstr ""
"Aperture Dimensions:\n"
" - (width, height) for R, O type.\n"
" - (dia, nVertices) for P type"

#: flatcamEditors/FlatCAMGrbEditor.py:2166
msgid "Aperture Code:"
msgstr "Aperture Code:"

#: flatcamEditors/FlatCAMGrbEditor.py:2168
msgid "Code for the new aperture"
msgstr "Code for the new aperture"

#: flatcamEditors/FlatCAMGrbEditor.py:2178
msgid ""
"Size for the new aperture.\n"
"If aperture type is 'R' or 'O' then\n"
"this value is automatically\n"
"calculated as:\n"
"sqrt(width**2 + height**2)"
msgstr ""
"Size for the new aperture.\n"
"If aperture type is 'R' or 'O' then\n"
"this value is automatically\n"
"calculated as:\n"
"sqrt(width**2 + height**2)"

#: flatcamEditors/FlatCAMGrbEditor.py:2190
msgid "Aperture Type:"
msgstr "Aperture Type:"

#: flatcamEditors/FlatCAMGrbEditor.py:2192
msgid ""
"Select the type of new aperture. Can be:\n"
"C = circular\n"
"R = rectangular\n"
"O = oblong"
msgstr ""
"Select the type of new aperture. Can be:\n"
"C = circular\n"
"R = rectangular\n"
"O = oblong"

#: flatcamEditors/FlatCAMGrbEditor.py:2203
msgid "Aperture Dim:"
msgstr "Aperture Dim:"

#: flatcamEditors/FlatCAMGrbEditor.py:2205
msgid ""
"Dimensions for the new aperture.\n"
"Active only for rectangular apertures (type R).\n"
"The format is (width, height)"
msgstr ""
"Dimensions for the new aperture.\n"
"Active only for rectangular apertures (type R).\n"
"The format is (width, height)"

#: flatcamEditors/FlatCAMGrbEditor.py:2214
msgid "Add/Delete Aperture:"
msgstr "Add/Delete Aperture:"

#: flatcamEditors/FlatCAMGrbEditor.py:2216
msgid "Add/Delete an aperture in the aperture table"
msgstr "Add/Delete an aperture in the aperture table"

#: flatcamEditors/FlatCAMGrbEditor.py:2225
msgid "Add a new aperture to the aperture list."
msgstr "Add a new aperture to the aperture list."

#: flatcamEditors/FlatCAMGrbEditor.py:2230
msgid "Delete a aperture in the aperture list"
msgstr "Delete a aperture in the aperture list"

#: flatcamEditors/FlatCAMGrbEditor.py:2246
msgid "Buffer Aperture:"
msgstr "Buffer Aperture:"

#: flatcamEditors/FlatCAMGrbEditor.py:2248
msgid "Buffer a aperture in the aperture list"
msgstr "Buffer a aperture in the aperture list"

#: flatcamEditors/FlatCAMGrbEditor.py:2261
msgid ""
"There are 3 types of corners:\n"
" - 'Round': the corner is rounded.\n"
" - 'Square:' the corner is met in a sharp angle.\n"
" - 'Beveled:' the corner is a line that directly connects the features "
"meeting in the corner"
msgstr ""
"There are 3 types of corners:\n"
" - 'Round': the corner is rounded.\n"
" - 'Square:' the corner is met in a sharp angle.\n"
" - 'Beveled:' the corner is a line that directly connects the features "
"meeting in the corner"

#: flatcamEditors/FlatCAMGrbEditor.py:2276 flatcamGUI/FlatCAMGUI.py:721
#: flatcamGUI/FlatCAMGUI.py:1943
msgid "Buffer"
msgstr "Buffer"

#: flatcamEditors/FlatCAMGrbEditor.py:2290
msgid "Scale Aperture:"
msgstr "Scale Aperture:"

#: flatcamEditors/FlatCAMGrbEditor.py:2292
msgid "Scale a aperture in the aperture list"
msgstr "Scale a aperture in the aperture list"

#: flatcamEditors/FlatCAMGrbEditor.py:2300
msgid "Scale factor:"
msgstr "Scale factor:"

#: flatcamEditors/FlatCAMGrbEditor.py:2302
msgid ""
"The factor by which to scale the selected aperture.\n"
"Values can be between 0.0000 and 999.9999"
msgstr ""
"The factor by which to scale the selected aperture.\n"
"Values can be between 0.0000 and 999.9999"

#: flatcamEditors/FlatCAMGrbEditor.py:2330 flatcamGUI/FlatCAMGUI.py:711
#: flatcamGUI/FlatCAMGUI.py:1933
msgid "Add Pad Array"
msgstr "Add Pad Array"

#: flatcamEditors/FlatCAMGrbEditor.py:2332
msgid "Add an array of pads (linear or circular array)"
msgstr "Add an array of pads (linear or circular array)"

#: flatcamEditors/FlatCAMGrbEditor.py:2338
msgid ""
"Select the type of pads array to create.\n"
"It can be Linear X(Y) or Circular"
msgstr ""
"Select the type of pads array to create.\n"
"It can be Linear X(Y) or Circular"

#: flatcamEditors/FlatCAMGrbEditor.py:2349
msgid "Nr of pads:"
msgstr "Nr of pads:"

#: flatcamEditors/FlatCAMGrbEditor.py:2351
msgid "Specify how many pads to be in the array."
msgstr "Specify how many pads to be in the array."

#: flatcamEditors/FlatCAMGrbEditor.py:2826
#: flatcamEditors/FlatCAMGrbEditor.py:2830
msgid ""
"[WARNING_NOTCL] Aperture code value is missing or wrong format. Add it and "
"retry."
msgstr ""
"[WARNING_NOTCL] Aperture code value is missing or wrong format. Add it and "
"retry."

#: flatcamEditors/FlatCAMGrbEditor.py:2866
msgid ""
"[WARNING_NOTCL] Aperture dimensions value is missing or wrong format. Add it "
"in format (width, height) and retry."
msgstr ""
"[WARNING_NOTCL] Aperture dimensions value is missing or wrong format. Add it "
"in format (width, height) and retry."

#: flatcamEditors/FlatCAMGrbEditor.py:2878
msgid ""
"[WARNING_NOTCL] Aperture size value is missing or wrong format. Add it and "
"retry."
msgstr ""
"[WARNING_NOTCL] Aperture size value is missing or wrong format. Add it and "
"retry."

#: flatcamEditors/FlatCAMGrbEditor.py:2889
msgid "[WARNING_NOTCL] Aperture already in the aperture table."
msgstr "[WARNING_NOTCL] Aperture already in the aperture table."

#: flatcamEditors/FlatCAMGrbEditor.py:2896
#, python-brace-format
msgid "[success] Added new aperture with code: {apid}"
msgstr "[success] Added new aperture with code: {apid}"

#: flatcamEditors/FlatCAMGrbEditor.py:2924
msgid "[WARNING_NOTCL] Select an aperture in Aperture Table"
msgstr "[WARNING_NOTCL] Select an aperture in Aperture Table"

#: flatcamEditors/FlatCAMGrbEditor.py:2930
#, python-format
#| msgid "[WARNING_NOTCL] Select an aperture in Aperture Table"
msgid "[WARNING_NOTCL] Select an aperture in Aperture Table --> %s"
msgstr "[WARNING_NOTCL] Select an aperture in Aperture Table --> %s"

#: flatcamEditors/FlatCAMGrbEditor.py:2953
#, python-brace-format
msgid "[success] Deleted aperture with code: {del_dia}"
msgstr "[success] Deleted aperture with code: {del_dia}"

#: flatcamEditors/FlatCAMGrbEditor.py:3373
#, python-format
msgid "Adding aperture: %s geo ..."
msgstr "Adding aperture: %s geo ..."

#: flatcamEditors/FlatCAMGrbEditor.py:3552
msgid ""
"[ERROR_NOTCL] There are no Aperture definitions in the file. Aborting Gerber "
"creation."
msgstr ""
"[ERROR_NOTCL] There are no Aperture definitions in the file. Aborting Gerber "
"creation."

#: flatcamEditors/FlatCAMGrbEditor.py:3555
#| msgid "[ERROR] An internal error has ocurred. See shell.\n"
msgid "[ERROR] An internal error has occurred. See shell.\n"
msgstr "[ERROR] An internal error has occurred. See shell.\n"

#: flatcamEditors/FlatCAMGrbEditor.py:3560
msgid "Creating Gerber."
msgstr "Creating Gerber."

#: flatcamEditors/FlatCAMGrbEditor.py:3568
msgid "[success] Gerber editing finished."
msgstr "[success] Gerber editing finished."

#: flatcamEditors/FlatCAMGrbEditor.py:3584
msgid "[WARNING_NOTCL] Cancelled. No aperture is selected"
msgstr "[WARNING_NOTCL] Cancelled. No aperture is selected"

#: flatcamEditors/FlatCAMGrbEditor.py:4104
msgid "[ERROR_NOTCL] Failed. No aperture geometry is selected."
msgstr "[ERROR_NOTCL] Failed. No aperture geometry is selected."

#: flatcamEditors/FlatCAMGrbEditor.py:4112
msgid "[success] Done. Apertures geometry deleted."
msgstr "[success] Done. Apertures geometry deleted."

#: flatcamEditors/FlatCAMGrbEditor.py:4261
msgid ""
"[WARNING_NOTCL] No aperture to buffer. Select at least one aperture and try "
"again."
msgstr ""
"[WARNING_NOTCL] No aperture to buffer. Select at least one aperture and try "
"again."

#: flatcamEditors/FlatCAMGrbEditor.py:4290
msgid ""
"[WARNING_NOTCL] Scale factor value is missing or wrong format. Add it and "
"retry."
msgstr ""
"[WARNING_NOTCL] Scale factor value is missing or wrong format. Add it and "
"retry."

#: flatcamEditors/FlatCAMGrbEditor.py:4320
msgid ""
"[WARNING_NOTCL] No aperture to scale. Select at least one aperture and try "
"again."
msgstr ""
"[WARNING_NOTCL] No aperture to scale. Select at least one aperture and try "
"again."

#: flatcamEditors/FlatCAMGrbEditor.py:4336
msgid "[success] Done. Scale Tool completed."
msgstr "[success] Done. Scale Tool completed."

#: flatcamGUI/FlatCAMGUI.py:50
msgid "&File"
msgstr "&File"

#: flatcamGUI/FlatCAMGUI.py:55
msgid "&New Project ...\tCTRL+N"
msgstr "&New Project ...\tCTRL+N"

#: flatcamGUI/FlatCAMGUI.py:57
msgid "Will create a new, blank project"
msgstr "Will create a new, blank project"

#: flatcamGUI/FlatCAMGUI.py:62
msgid "&New"
msgstr "&New"

#: flatcamGUI/FlatCAMGUI.py:65
msgid "Geometry\tN"
msgstr "Geometry\tN"

#: flatcamGUI/FlatCAMGUI.py:67
msgid "Will create a new, empty Geometry Object."
msgstr "Will create a new, empty Geometry Object."

#: flatcamGUI/FlatCAMGUI.py:69
msgid "Gerber\tB"
msgstr "Gerber\tB"

#: flatcamGUI/FlatCAMGUI.py:71
msgid "Will create a new, empty Gerber Object."
msgstr "Will create a new, empty Gerber Object."

#: flatcamGUI/FlatCAMGUI.py:73
msgid "Excellon\tL"
msgstr "Excellon\tL"

#: flatcamGUI/FlatCAMGUI.py:75
msgid "Will create a new, empty Excellon Object."
msgstr "Will create a new, empty Excellon Object."

#: flatcamGUI/FlatCAMGUI.py:78 flatcamTools/ToolPcbWizard.py:63
#: flatcamTools/ToolPcbWizard.py:71
msgid "Open"
msgstr "Open"

#: flatcamGUI/FlatCAMGUI.py:83
msgid "Open &Gerber ...\tCTRL+G"
msgstr "Open &Gerber ...\tCTRL+G"

#: flatcamGUI/FlatCAMGUI.py:90
msgid "Open &Excellon ...\tCTRL+E"
msgstr "Open &Excellon ...\tCTRL+E"

#: flatcamGUI/FlatCAMGUI.py:95
msgid "Open G-&Code ..."
msgstr "Open G-&Code ..."

#: flatcamGUI/FlatCAMGUI.py:99
msgid "Open &Project ..."
msgstr "Open &Project ..."

#: flatcamGUI/FlatCAMGUI.py:105
msgid "Open Config ..."
msgstr "Open Config ..."

#: flatcamGUI/FlatCAMGUI.py:109
msgid "Recent files"
msgstr "Recent files"

#: flatcamGUI/FlatCAMGUI.py:115
msgid "Scripting"
msgstr "Scripting"

#: flatcamGUI/FlatCAMGUI.py:118
msgid "New Script ..."
msgstr "New Script ..."

#: flatcamGUI/FlatCAMGUI.py:120
msgid "Open Script ..."
msgstr "Open Script ..."

#: flatcamGUI/FlatCAMGUI.py:122
msgid "Run Script ...\tSHIFT+S"
msgstr "Run Script ...\tSHIFT+S"

#: flatcamGUI/FlatCAMGUI.py:125
msgid ""
"Will run the opened Tcl Script thus\n"
"enabling the automation of certain\n"
"functions of FlatCAM."
msgstr ""
"Will run the opened Tcl Script thus\n"
"enabling the automation of certain\n"
"functions of FlatCAM."

#: flatcamGUI/FlatCAMGUI.py:138
msgid "Import"
msgstr "Import"

#: flatcamGUI/FlatCAMGUI.py:140
msgid "&SVG as Geometry Object ..."
msgstr "&SVG as Geometry Object ..."

#: flatcamGUI/FlatCAMGUI.py:143
msgid "&SVG as Gerber Object ..."
msgstr "&SVG as Gerber Object ..."

#: flatcamGUI/FlatCAMGUI.py:148
msgid "&DXF as Geometry Object ..."
msgstr "&DXF as Geometry Object ..."

#: flatcamGUI/FlatCAMGUI.py:151
msgid "&DXF as Gerber Object ..."
msgstr "&DXF as Gerber Object ..."

#: flatcamGUI/FlatCAMGUI.py:156
msgid "Export"
msgstr "Export"

#: flatcamGUI/FlatCAMGUI.py:159
msgid "Export &SVG ..."
msgstr "Export &SVG ..."

#: flatcamGUI/FlatCAMGUI.py:162
msgid "Export DXF ..."
msgstr "Export DXF ..."

#: flatcamGUI/FlatCAMGUI.py:167
msgid "Export &PNG ..."
msgstr "Export &PNG ..."

#: flatcamGUI/FlatCAMGUI.py:169
msgid ""
"Will export an image in PNG format,\n"
"the saved image will contain the visual \n"
"information currently in FlatCAM Plot Area."
msgstr ""
"Will export an image in PNG format,\n"
"the saved image will contain the visual \n"
"information currently in FlatCAM Plot Area."

#: flatcamGUI/FlatCAMGUI.py:177
msgid "Export &Excellon ..."
msgstr "Export &Excellon ..."

#: flatcamGUI/FlatCAMGUI.py:180
msgid ""
"Will export an Excellon Object as Excellon file,\n"
"the coordinates format, the file units and zeros\n"
"are set in Preferences -> Excellon Export."
msgstr ""
"Will export an Excellon Object as Excellon file,\n"
"the coordinates format, the file units and zeros\n"
"are set in Preferences -> Excellon Export."

#: flatcamGUI/FlatCAMGUI.py:186
#| msgid "Export &SVG ..."
msgid "Export &Gerber ..."
msgstr "Export &Gerber ..."

#: flatcamGUI/FlatCAMGUI.py:189
#| msgid ""
#| "Will export an Excellon Object as Excellon file,\n"
#| "the coordinates format, the file units and zeros\n"
#| "are set in Preferences -> Excellon Export."
msgid ""
"Will export an Gerber Object as Gerber file,\n"
"the coordinates format, the file units and zeros\n"
"are set in Preferences -> Gerber Export."
msgstr ""
"Will export an Gerber Object as Gerber file,\n"
"the coordinates format, the file units and zeros\n"
"are set in Preferences -> Gerber Export."

#: flatcamGUI/FlatCAMGUI.py:199
msgid "Save &Defaults"
msgstr "Save &Defaults"

#: flatcamGUI/FlatCAMGUI.py:205 flatcamGUI/FlatCAMGUI.py:533
msgid "Save"
msgstr "Save"

#: flatcamGUI/FlatCAMGUI.py:207
msgid "&Save Project ..."
msgstr "&Save Project ..."

#: flatcamGUI/FlatCAMGUI.py:212
msgid "Save Project &As ...\tCTRL+S"
msgstr "Save Project &As ...\tCTRL+S"

#: flatcamGUI/FlatCAMGUI.py:216
msgid "Save Project C&opy ..."
msgstr "Save Project C&opy ..."

#: flatcamGUI/FlatCAMGUI.py:224
msgid "E&xit"
msgstr "E&xit"

#: flatcamGUI/FlatCAMGUI.py:230
msgid "&Edit"
msgstr "&Edit"

#: flatcamGUI/FlatCAMGUI.py:233
msgid "Edit Object\tE"
msgstr "Edit Object\tE"

#: flatcamGUI/FlatCAMGUI.py:234
msgid "Close Editor\tCTRL+S"
msgstr "Close Editor\tCTRL+S"

#: flatcamGUI/FlatCAMGUI.py:242
msgid "Conversion"
msgstr "Conversion"

#: flatcamGUI/FlatCAMGUI.py:244
msgid "&Join Geo/Gerber/Exc -> Geo"
msgstr "&Join Geo/Gerber/Exc -> Geo"

#: flatcamGUI/FlatCAMGUI.py:246
msgid ""
"Merge a selection of objects, which can be of type:\n"
"- Gerber\n"
"- Excellon\n"
"- Geometry\n"
"into a new combo Geometry object."
msgstr ""
"Merge a selection of objects, which can be of type:\n"
"- Gerber\n"
"- Excellon\n"
"- Geometry\n"
"into a new combo Geometry object."

#: flatcamGUI/FlatCAMGUI.py:253
msgid "Join Excellon(s) -> Excellon"
msgstr "Join Excellon(s) -> Excellon"

#: flatcamGUI/FlatCAMGUI.py:255
msgid "Merge a selection of Excellon objects into a new combo Excellon object."
msgstr ""
"Merge a selection of Excellon objects into a new combo Excellon object."

#: flatcamGUI/FlatCAMGUI.py:258
msgid "Join Gerber(s) -> Gerber"
msgstr "Join Gerber(s) -> Gerber"

#: flatcamGUI/FlatCAMGUI.py:260
msgid "Merge a selection of Gerber objects into a new combo Gerber object."
msgstr "Merge a selection of Gerber objects into a new combo Gerber object."

#: flatcamGUI/FlatCAMGUI.py:265
msgid "Convert Single to MultiGeo"
msgstr "Convert Single to MultiGeo"

#: flatcamGUI/FlatCAMGUI.py:267
msgid ""
"Will convert a Geometry object from single_geometry type\n"
"to a multi_geometry type."
msgstr ""
"Will convert a Geometry object from single_geometry type\n"
"to a multi_geometry type."

#: flatcamGUI/FlatCAMGUI.py:271
msgid "Convert Multi to SingleGeo"
msgstr "Convert Multi to SingleGeo"

#: flatcamGUI/FlatCAMGUI.py:273
msgid ""
"Will convert a Geometry object from multi_geometry type\n"
"to a single_geometry type."
msgstr ""
"Will convert a Geometry object from multi_geometry type\n"
"to a single_geometry type."

#: flatcamGUI/FlatCAMGUI.py:279
#| msgid "Convert Single to MultiGeo"
msgid "Convert Any to Geo"
msgstr "Convert Any to Geo"

#: flatcamGUI/FlatCAMGUI.py:281
#| msgid "Convert Single to MultiGeo"
msgid "Convert Any to Gerber"
msgstr "Convert Any to Gerber"

#: flatcamGUI/FlatCAMGUI.py:286
#| msgid "&Copy Object\tCTRL+C"
msgid "&Copy\tCTRL+C"
msgstr "&Copy\tCTRL+C"

#: flatcamGUI/FlatCAMGUI.py:290
msgid "&Delete\tDEL"
msgstr "&Delete\tDEL"

#: flatcamGUI/FlatCAMGUI.py:294
msgid "Se&t Origin\tO"
msgstr "Se&t Origin\tO"

#: flatcamGUI/FlatCAMGUI.py:295
msgid "Jump to Location\tJ"
msgstr "Jump to Location\tJ"

#: flatcamGUI/FlatCAMGUI.py:300
msgid "Toggle Units\tQ"
msgstr "Toggle Units\tQ"

#: flatcamGUI/FlatCAMGUI.py:302
msgid "&Select All\tCTRL+A"
msgstr "&Select All\tCTRL+A"

#: flatcamGUI/FlatCAMGUI.py:306
msgid "&Preferences\tSHIFT+P"
msgstr "&Preferences\tSHIFT+P"

#: flatcamGUI/FlatCAMGUI.py:309
msgid "&Options"
msgstr "&Options"

#: flatcamGUI/FlatCAMGUI.py:324
msgid "&Rotate Selection\tSHIFT+(R)"
msgstr "&Rotate Selection\tSHIFT+(R)"

#: flatcamGUI/FlatCAMGUI.py:329
msgid "&Skew on X axis\tSHIFT+X"
msgstr "&Skew on X axis\tSHIFT+X"

#: flatcamGUI/FlatCAMGUI.py:331
msgid "S&kew on Y axis\tSHIFT+Y"
msgstr "S&kew on Y axis\tSHIFT+Y"

#: flatcamGUI/FlatCAMGUI.py:336
msgid "Flip on &X axis\tX"
msgstr "Flip on &X axis\tX"

#: flatcamGUI/FlatCAMGUI.py:338
msgid "Flip on &Y axis\tY"
msgstr "Flip on &Y axis\tY"

#: flatcamGUI/FlatCAMGUI.py:343
msgid "View source\tALT+S"
msgstr "View source\tALT+S"

#: flatcamGUI/FlatCAMGUI.py:348
msgid "&View"
msgstr "&View"

#: flatcamGUI/FlatCAMGUI.py:349
msgid "Enable all plots\tALT+1"
msgstr "Enable all plots\tALT+1"

#: flatcamGUI/FlatCAMGUI.py:351
msgid "Disable all plots\tALT+2"
msgstr "Disable all plots\tALT+2"

#: flatcamGUI/FlatCAMGUI.py:353
msgid "Disable non-selected\tALT+3"
msgstr "Disable non-selected\tALT+3"

#: flatcamGUI/FlatCAMGUI.py:356
msgid "&Zoom Fit\tV"
msgstr "&Zoom Fit\tV"

#: flatcamGUI/FlatCAMGUI.py:357
msgid "&Zoom In\t-"
msgstr "&Zoom In\t-"

#: flatcamGUI/FlatCAMGUI.py:358
msgid "&Zoom Out\t="
msgstr "&Zoom Out\t="

#: flatcamGUI/FlatCAMGUI.py:362
msgid "Toggle Code Editor\tCTRL+E"
msgstr "Toggle Code Editor\tCTRL+E"

#: flatcamGUI/FlatCAMGUI.py:365
msgid "&Toggle FullScreen\tALT+F10"
msgstr "&Toggle FullScreen\tALT+F10"

#: flatcamGUI/FlatCAMGUI.py:367
msgid "&Toggle Plot Area\tCTRL+F10"
msgstr "&Toggle Plot Area\tCTRL+F10"

#: flatcamGUI/FlatCAMGUI.py:369
msgid "&Toggle Project/Sel/Tool\t`"
msgstr "&Toggle Project/Sel/Tool\t`"

#: flatcamGUI/FlatCAMGUI.py:372
msgid "&Toggle Grid Snap\tG"
msgstr "&Toggle Grid Snap\tG"

#: flatcamGUI/FlatCAMGUI.py:374
msgid "&Toggle Axis\tSHIFT+G"
msgstr "&Toggle Axis\tSHIFT+G"

#: flatcamGUI/FlatCAMGUI.py:377
msgid "Toggle Workspace\tSHIFT+W"
msgstr "Toggle Workspace\tSHIFT+W"

#: flatcamGUI/FlatCAMGUI.py:381
msgid "&Tool"
msgstr "&Tool"

#: flatcamGUI/FlatCAMGUI.py:383
msgid "&Command Line\tS"
msgstr "&Command Line\tS"

#: flatcamGUI/FlatCAMGUI.py:386
msgid "&Help"
msgstr "&Help"

#: flatcamGUI/FlatCAMGUI.py:387
msgid "Help\tF1"
msgstr "Help\tF1"

#: flatcamGUI/FlatCAMGUI.py:388
msgid "FlatCAM.org"
msgstr "FlatCAM.org"

#: flatcamGUI/FlatCAMGUI.py:391
msgid "Shortcuts List\tF3"
msgstr "Shortcuts List\tF3"

#: flatcamGUI/FlatCAMGUI.py:392
msgid "YouTube Channel\tF4"
msgstr "YouTube Channel\tF4"

#: flatcamGUI/FlatCAMGUI.py:394
msgid "About"
msgstr "About"

#: flatcamGUI/FlatCAMGUI.py:405
msgid "Add Circle\tO"
msgstr "Add Circle\tO"

#: flatcamGUI/FlatCAMGUI.py:407
msgid "Add Arc\tA"
msgstr "Add Arc\tA"

#: flatcamGUI/FlatCAMGUI.py:410
msgid "Add Rectangle\tR"
msgstr "Add Rectangle\tR"

#: flatcamGUI/FlatCAMGUI.py:413
msgid "Add Polygon\tN"
msgstr "Add Polygon\tN"

#: flatcamGUI/FlatCAMGUI.py:415
msgid "Add Path\tP"
msgstr "Add Path\tP"

#: flatcamGUI/FlatCAMGUI.py:417
msgid "Add Text\tT"
msgstr "Add Text\tT"

#: flatcamGUI/FlatCAMGUI.py:420
msgid "Polygon Union\tU"
msgstr "Polygon Union\tU"

#: flatcamGUI/FlatCAMGUI.py:422
msgid "Polygon Intersection\tE"
msgstr "Polygon Intersection\tE"

#: flatcamGUI/FlatCAMGUI.py:424
msgid "Polygon Subtraction\tS"
msgstr "Polygon Subtraction\tS"

#: flatcamGUI/FlatCAMGUI.py:428
msgid "Cut Path\tX"
msgstr "Cut Path\tX"

#: flatcamGUI/FlatCAMGUI.py:430
msgid "Copy Geom\tC"
msgstr "Copy Geom\tC"

#: flatcamGUI/FlatCAMGUI.py:432
msgid "Delete Shape\tDEL"
msgstr "Delete Shape\tDEL"

#: flatcamGUI/FlatCAMGUI.py:435 flatcamGUI/FlatCAMGUI.py:508
msgid "Move\tM"
msgstr "Move\tM"

#: flatcamGUI/FlatCAMGUI.py:437
msgid "Buffer Tool\tB"
msgstr "Buffer Tool\tB"

#: flatcamGUI/FlatCAMGUI.py:440
msgid "Paint Tool\tI"
msgstr "Paint Tool\tI"

#: flatcamGUI/FlatCAMGUI.py:443
msgid "Transform Tool\tALT+R"
msgstr "Transform Tool\tALT+R"

#: flatcamGUI/FlatCAMGUI.py:447
msgid "Toggle Corner Snap\tK"
msgstr "Toggle Corner Snap\tK"

#: flatcamGUI/FlatCAMGUI.py:450
msgid ">Excellon Editor<"
msgstr ">Excellon Editor<"

#: flatcamGUI/FlatCAMGUI.py:454
msgid "Add Drill Array\tA"
msgstr "Add Drill Array\tA"

#: flatcamGUI/FlatCAMGUI.py:456
msgid "Add Drill\tD"
msgstr "Add Drill\tD"

#: flatcamGUI/FlatCAMGUI.py:460
msgid "Resize Drill(S)\tR"
msgstr "Resize Drill(S)\tR"

#: flatcamGUI/FlatCAMGUI.py:462 flatcamGUI/FlatCAMGUI.py:501
msgid "Copy\tC"
msgstr "Copy\tC"

#: flatcamGUI/FlatCAMGUI.py:464 flatcamGUI/FlatCAMGUI.py:503
msgid "Delete\tDEL"
msgstr "Delete\tDEL"

#: flatcamGUI/FlatCAMGUI.py:469
msgid "Move Drill(s)\tM"
msgstr "Move Drill(s)\tM"

#: flatcamGUI/FlatCAMGUI.py:473
msgid ">Gerber Editor<"
msgstr ">Gerber Editor<"

#: flatcamGUI/FlatCAMGUI.py:477
msgid "Add Pad\tP"
msgstr "Add Pad\tP"

#: flatcamGUI/FlatCAMGUI.py:479
msgid "Add Pad Array\tA"
msgstr "Add Pad Array\tA"

#: flatcamGUI/FlatCAMGUI.py:481
msgid "Add Track\tT"
msgstr "Add Track\tT"

#: flatcamGUI/FlatCAMGUI.py:483
msgid "Add Region\tN"
msgstr "Add Region\tN"

#: flatcamGUI/FlatCAMGUI.py:487
msgid "Poligonize\tALT+N"
msgstr "Poligonize\tALT+N"

#: flatcamGUI/FlatCAMGUI.py:489
msgid "Add SemiDisc\tE"
msgstr "Add SemiDisc\tE"

#: flatcamGUI/FlatCAMGUI.py:491
msgid "Add Disc\tD"
msgstr "Add Disc\tD"

#: flatcamGUI/FlatCAMGUI.py:493
msgid "Buffer\tB"
msgstr "Buffer\tB"

#: flatcamGUI/FlatCAMGUI.py:495
msgid "Scale\tS"
msgstr "Scale\tS"

#: flatcamGUI/FlatCAMGUI.py:497
msgid "Transform\tALT+R"
msgstr "Transform\tALT+R"

#: flatcamGUI/FlatCAMGUI.py:524
msgid "Enable Plot"
msgstr "Enable Plot"

#: flatcamGUI/FlatCAMGUI.py:525
msgid "Disable Plot"
msgstr "Disable Plot"

#: flatcamGUI/FlatCAMGUI.py:527
msgid "Generate CNC"
msgstr "Generate CNC"

#: flatcamGUI/FlatCAMGUI.py:528
msgid "View Source"
msgstr "View Source"

#: flatcamGUI/FlatCAMGUI.py:530 flatcamGUI/FlatCAMGUI.py:1617
msgid "Edit"
msgstr "Edit"

#: flatcamGUI/FlatCAMGUI.py:536 flatcamGUI/FlatCAMGUI.py:1623
#: flatcamTools/ToolProperties.py:25
msgid "Properties"
msgstr "Properties"

#: flatcamGUI/FlatCAMGUI.py:565
msgid "File Toolbar"
msgstr "File Toolbar"

#: flatcamGUI/FlatCAMGUI.py:569
msgid "Edit Toolbar"
msgstr "Edit Toolbar"

#: flatcamGUI/FlatCAMGUI.py:573
msgid "View Toolbar"
msgstr "View Toolbar"

#: flatcamGUI/FlatCAMGUI.py:577
msgid "Shell Toolbar"
msgstr "Shell Toolbar"

#: flatcamGUI/FlatCAMGUI.py:581
msgid "Tools Toolbar"
msgstr "Tools Toolbar"

#: flatcamGUI/FlatCAMGUI.py:585
msgid "Excellon Editor Toolbar"
msgstr "Excellon Editor Toolbar"

#: flatcamGUI/FlatCAMGUI.py:589
msgid "Geometry Editor Toolbar"
msgstr "Geometry Editor Toolbar"

#: flatcamGUI/FlatCAMGUI.py:593
msgid "Gerber Editor Toolbar"
msgstr "Gerber Editor Toolbar"

#: flatcamGUI/FlatCAMGUI.py:597
msgid "Grid Toolbar"
msgstr "Grid Toolbar"

#: flatcamGUI/FlatCAMGUI.py:616 flatcamGUI/FlatCAMGUI.py:1834
msgid "Open project"
msgstr "Open project"

#: flatcamGUI/FlatCAMGUI.py:617 flatcamGUI/FlatCAMGUI.py:1835
msgid "Save project"
msgstr "Save project"

#: flatcamGUI/FlatCAMGUI.py:620 flatcamGUI/FlatCAMGUI.py:1838
msgid "New Blank Geometry"
msgstr "New Blank Geometry"

#: flatcamGUI/FlatCAMGUI.py:621
msgid "New Blank Gerber"
msgstr "New Blank Gerber"

#: flatcamGUI/FlatCAMGUI.py:622 flatcamGUI/FlatCAMGUI.py:1839
msgid "New Blank Excellon"
msgstr "New Blank Excellon"

#: flatcamGUI/FlatCAMGUI.py:624 flatcamGUI/FlatCAMGUI.py:1841
msgid "Editor"
msgstr "Editor"

#: flatcamGUI/FlatCAMGUI.py:626 flatcamGUI/FlatCAMGUI.py:1843
msgid "Save Object and close the Editor"
msgstr "Save Object and close the Editor"

#: flatcamGUI/FlatCAMGUI.py:630 flatcamGUI/FlatCAMGUI.py:1847
msgid "&Delete"
msgstr "&Delete"

#: flatcamGUI/FlatCAMGUI.py:633 flatcamGUI/FlatCAMGUI.py:1850
msgid "&Replot"
msgstr "&Replot"

#: flatcamGUI/FlatCAMGUI.py:634 flatcamGUI/FlatCAMGUI.py:1851
msgid "&Clear plot"
msgstr "&Clear plot"

#: flatcamGUI/FlatCAMGUI.py:635 flatcamGUI/FlatCAMGUI.py:1852
msgid "Zoom In"
msgstr "Zoom In"

#: flatcamGUI/FlatCAMGUI.py:636 flatcamGUI/FlatCAMGUI.py:1853
msgid "Zoom Out"
msgstr "Zoom Out"

#: flatcamGUI/FlatCAMGUI.py:637 flatcamGUI/FlatCAMGUI.py:1592
#: flatcamGUI/FlatCAMGUI.py:1854
msgid "Zoom Fit"
msgstr "Zoom Fit"

#: flatcamGUI/FlatCAMGUI.py:642 flatcamGUI/FlatCAMGUI.py:1859
msgid "&Command Line"
msgstr "&Command Line"

#: flatcamGUI/FlatCAMGUI.py:645 flatcamGUI/FlatCAMGUI.py:1862
msgid "2Sided Tool"
msgstr "2Sided Tool"

#: flatcamGUI/FlatCAMGUI.py:646 flatcamGUI/FlatCAMGUI.py:1863
msgid "&Cutout Tool"
msgstr "&Cutout Tool"

#: flatcamGUI/FlatCAMGUI.py:647 flatcamGUI/FlatCAMGUI.py:1864
#: flatcamGUI/ObjectUI.py:392 flatcamTools/ToolNonCopperClear.py:285
msgid "NCC Tool"
msgstr "NCC Tool"

#: flatcamGUI/FlatCAMGUI.py:651 flatcamGUI/FlatCAMGUI.py:1868
msgid "Panel Tool"
msgstr "Panel Tool"

#: flatcamGUI/FlatCAMGUI.py:652 flatcamGUI/FlatCAMGUI.py:1869
#: flatcamTools/ToolFilm.py:204
msgid "Film Tool"
msgstr "Film Tool"

#: flatcamGUI/FlatCAMGUI.py:653 flatcamGUI/FlatCAMGUI.py:1871
msgid "SolderPaste Tool"
msgstr "SolderPaste Tool"

#: flatcamGUI/FlatCAMGUI.py:654 flatcamGUI/FlatCAMGUI.py:1872
#: flatcamTools/ToolSub.py:26
msgid "Substract Tool"
msgstr "Substract Tool"

#: flatcamGUI/FlatCAMGUI.py:658 flatcamGUI/FlatCAMGUI.py:1877
msgid "Calculators Tool"
msgstr "Calculators Tool"

#: flatcamGUI/FlatCAMGUI.py:662 flatcamGUI/FlatCAMGUI.py:676
#: flatcamGUI/FlatCAMGUI.py:709 flatcamGUI/FlatCAMGUI.py:1881
#: flatcamGUI/FlatCAMGUI.py:1931
msgid "Select"
msgstr "Select"

#: flatcamGUI/FlatCAMGUI.py:663 flatcamGUI/FlatCAMGUI.py:1882
msgid "Add Drill Hole"
msgstr "Add Drill Hole"

#: flatcamGUI/FlatCAMGUI.py:665 flatcamGUI/FlatCAMGUI.py:1884
msgid "Add Drill Hole Array"
msgstr "Add Drill Hole Array"

#: flatcamGUI/FlatCAMGUI.py:666 flatcamGUI/FlatCAMGUI.py:1885
msgid "Resize Drill"
msgstr "Resize Drill"

#: flatcamGUI/FlatCAMGUI.py:669 flatcamGUI/FlatCAMGUI.py:1888
msgid "Copy Drill"
msgstr "Copy Drill"

#: flatcamGUI/FlatCAMGUI.py:670 flatcamGUI/FlatCAMGUI.py:1890
msgid "Delete Drill"
msgstr "Delete Drill"

#: flatcamGUI/FlatCAMGUI.py:673 flatcamGUI/FlatCAMGUI.py:1893
msgid "Move Drill"
msgstr "Move Drill"

#: flatcamGUI/FlatCAMGUI.py:677 flatcamGUI/FlatCAMGUI.py:1897
msgid "Add Circle"
msgstr "Add Circle"

#: flatcamGUI/FlatCAMGUI.py:678 flatcamGUI/FlatCAMGUI.py:1898
msgid "Add Arc"
msgstr "Add Arc"

#: flatcamGUI/FlatCAMGUI.py:680 flatcamGUI/FlatCAMGUI.py:1900
msgid "Add Rectangle"
msgstr "Add Rectangle"

#: flatcamGUI/FlatCAMGUI.py:683 flatcamGUI/FlatCAMGUI.py:1903
msgid "Add Path"
msgstr "Add Path"

#: flatcamGUI/FlatCAMGUI.py:684 flatcamGUI/FlatCAMGUI.py:1905
msgid "Add Polygon"
msgstr "Add Polygon"

#: flatcamGUI/FlatCAMGUI.py:686 flatcamGUI/FlatCAMGUI.py:1907
msgid "Add Text"
msgstr "Add Text"

#: flatcamGUI/FlatCAMGUI.py:687 flatcamGUI/FlatCAMGUI.py:1909
msgid "Add Buffer"
msgstr "Add Buffer"

#: flatcamGUI/FlatCAMGUI.py:688 flatcamGUI/FlatCAMGUI.py:1910
msgid "Paint Shape"
msgstr "Paint Shape"

#: flatcamGUI/FlatCAMGUI.py:691 flatcamGUI/FlatCAMGUI.py:1913
msgid "Polygon Union"
msgstr "Polygon Union"

#: flatcamGUI/FlatCAMGUI.py:693 flatcamGUI/FlatCAMGUI.py:1915
msgid "Polygon Intersection"
msgstr "Polygon Intersection"

#: flatcamGUI/FlatCAMGUI.py:695 flatcamGUI/FlatCAMGUI.py:1917
msgid "Polygon Subtraction"
msgstr "Polygon Subtraction"

#: flatcamGUI/FlatCAMGUI.py:698 flatcamGUI/FlatCAMGUI.py:1920
msgid "Cut Path"
msgstr "Cut Path"

#: flatcamGUI/FlatCAMGUI.py:699
msgid "Copy Shape(s)"
msgstr "Copy Shape(s)"

#: flatcamGUI/FlatCAMGUI.py:702
msgid "Delete Shape '-'"
msgstr "Delete Shape '-'"

#: flatcamGUI/FlatCAMGUI.py:704 flatcamGUI/FlatCAMGUI.py:728
#: flatcamGUI/FlatCAMGUI.py:1925 flatcamGUI/FlatCAMGUI.py:1950
msgid "Transformations"
msgstr "Transformations"

#: flatcamGUI/FlatCAMGUI.py:706
msgid "Move Objects "
msgstr "Move Objects "

#: flatcamGUI/FlatCAMGUI.py:710 flatcamGUI/FlatCAMGUI.py:1932
msgid "Add Pad"
msgstr "Add Pad"

#: flatcamGUI/FlatCAMGUI.py:712 flatcamGUI/FlatCAMGUI.py:1934
msgid "Add Track"
msgstr "Add Track"

#: flatcamGUI/FlatCAMGUI.py:713 flatcamGUI/FlatCAMGUI.py:1935
msgid "Add Region"
msgstr "Add Region"

#: flatcamGUI/FlatCAMGUI.py:715 flatcamGUI/FlatCAMGUI.py:1937
msgid "Poligonize"
msgstr "Poligonize"

#: flatcamGUI/FlatCAMGUI.py:717 flatcamGUI/FlatCAMGUI.py:1939
msgid "SemiDisc"
msgstr "SemiDisc"

#: flatcamGUI/FlatCAMGUI.py:718 flatcamGUI/FlatCAMGUI.py:1940
msgid "Disc"
msgstr "Disc"

#: flatcamGUI/FlatCAMGUI.py:730 flatcamGUI/FlatCAMGUI.py:1602
#: flatcamGUI/FlatCAMGUI.py:1622 flatcamGUI/FlatCAMGUI.py:1952
#: flatcamTools/ToolMove.py:26
msgid "Move"
msgstr "Move"

#: flatcamGUI/FlatCAMGUI.py:736 flatcamGUI/FlatCAMGUI.py:1958
msgid "Snap to grid"
msgstr "Snap to grid"

#: flatcamGUI/FlatCAMGUI.py:739 flatcamGUI/FlatCAMGUI.py:1961
msgid "Grid X snapping distance"
msgstr "Grid X snapping distance"

#: flatcamGUI/FlatCAMGUI.py:744 flatcamGUI/FlatCAMGUI.py:1966
msgid "Grid Y snapping distance"
msgstr "Grid Y snapping distance"

#: flatcamGUI/FlatCAMGUI.py:750 flatcamGUI/FlatCAMGUI.py:1972
msgid ""
"When active, value on Grid_X\n"
"is copied to the Grid_Y value."
msgstr ""
"When active, value on Grid_X\n"
"is copied to the Grid_Y value."

#: flatcamGUI/FlatCAMGUI.py:756 flatcamGUI/FlatCAMGUI.py:1978
msgid "Snap to corner"
msgstr "Snap to corner"

#: flatcamGUI/FlatCAMGUI.py:760 flatcamGUI/FlatCAMGUI.py:1982
#: flatcamGUI/FlatCAMGUI.py:3339
msgid "Max. magnet distance"
msgstr "Max. magnet distance"

#: flatcamGUI/FlatCAMGUI.py:788 flatcamGUI/FlatCAMGUI.py:1586
msgid "Project"
msgstr "Project"

#: flatcamGUI/FlatCAMGUI.py:798
msgid "Selected"
msgstr "Selected"

#: flatcamGUI/FlatCAMGUI.py:817 flatcamGUI/FlatCAMGUI.py:825
msgid "Plot Area"
msgstr "Plot Area"

#: flatcamGUI/FlatCAMGUI.py:849
msgid "General"
msgstr "General"

#: flatcamGUI/FlatCAMGUI.py:858
msgid "APP.  DEFAULTS"
msgstr "APP.  DEFAULTS"

#: flatcamGUI/FlatCAMGUI.py:859
msgid "PROJ. OPTIONS "
msgstr "PROJ. OPTIONS "

#: flatcamGUI/FlatCAMGUI.py:870
msgid "GERBER"
msgstr "GERBER"

#: flatcamGUI/FlatCAMGUI.py:879
msgid "EXCELLON"
msgstr "EXCELLON"

#: flatcamGUI/FlatCAMGUI.py:888
msgid "GEOMETRY"
msgstr "GEOMETRY"

#: flatcamGUI/FlatCAMGUI.py:898
msgid "CNC-JOB"
msgstr "CNC-JOB"

#: flatcamGUI/FlatCAMGUI.py:907
msgid "TOOLS"
msgstr "TOOLS"

#: flatcamGUI/FlatCAMGUI.py:924
msgid "Import Preferences"
msgstr "Import Preferences"

#: flatcamGUI/FlatCAMGUI.py:927
msgid ""
"Import a full set of FlatCAM settings from a file\n"
"previously saved on HDD.\n"
"\n"
"FlatCAM automatically save a 'factory_defaults' file\n"
"on the first start. Do not delete that file."
msgstr ""
"Import a full set of FlatCAM settings from a file\n"
"previously saved on HDD.\n"
"\n"
"FlatCAM automatically save a 'factory_defaults' file\n"
"on the first start. Do not delete that file."

#: flatcamGUI/FlatCAMGUI.py:934
msgid "Export Preferences"
msgstr "Export Preferences"

#: flatcamGUI/FlatCAMGUI.py:937
msgid ""
"Export a full set of FlatCAM settings in a file\n"
"that is saved on HDD."
msgstr ""
"Export a full set of FlatCAM settings in a file\n"
"that is saved on HDD."

#: flatcamGUI/FlatCAMGUI.py:942
msgid "Open Pref Folder"
msgstr "Open Pref Folder"

#: flatcamGUI/FlatCAMGUI.py:945
msgid "Open the folder where FlatCAM save the preferences files."
msgstr "Open the folder where FlatCAM save the preferences files."

#: flatcamGUI/FlatCAMGUI.py:953
msgid "Save Preferences"
msgstr "Save Preferences"

#: flatcamGUI/FlatCAMGUI.py:956
msgid ""
"Save the current settings in the 'current_defaults' file\n"
"which is the file storing the working default preferences."
msgstr ""
"Save the current settings in the 'current_defaults' file\n"
"which is the file storing the working default preferences."

#: flatcamGUI/FlatCAMGUI.py:982
msgid ""
"<b>General Shortcut list</b><br>\n"
"            <table border=\"0\" cellpadding=\"0\" cellspacing=\"0\" style="
"\"width:283px\">\n"
"                <tbody>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\" width=\"89\"><strong>F3</strong></"
"td>\n"
"                        <td width=\"194\"><span style=\"color:"
"#006400\"><strong>&nbsp;SHOW SHORTCUT LIST</strong></span></td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\">&nbsp;</td>\n"
"                        <td>&nbsp;</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>1</strong></td>\n"
"                        <td>&nbsp;Switch to Project Tab</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>2</strong></td>\n"
"                        <td>&nbsp;Switch to Selected Tab</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>3</strong></td>\n"
"                        <td>&nbsp;Switch to Tool Tab</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\">&nbsp;</td>\n"
"                        <td>&nbsp;</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>B</strong></td>\n"
"                        <td>&nbsp;New Gerber</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>E</strong></td>\n"
"                        <td>&nbsp;Edit Object (if selected)</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>G</strong></td>\n"
"                        <td>&nbsp;Grid On/Off</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>J</strong></td>\n"
"                        <td>&nbsp;Jump to Coordinates</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>L</strong></td>\n"
"                        <td>&nbsp;New Excellon</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>M</strong></td>\n"
"                        <td>&nbsp;Move Obj</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>N</strong></td>\n"
"                        <td>&nbsp;New Geometry</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>O</strong></td>\n"
"                        <td>&nbsp;Set Origin</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>Q</strong></td>\n"
"                        <td>&nbsp;Change Units</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>P</strong></td>\n"
"                        <td>&nbsp;Open Properties Tool</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>R</strong></td>\n"
"                        <td>&nbsp;Rotate by 90 degree CW</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>S</strong></td>\n"
"                        <td>&nbsp;Shell Toggle</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>T</strong></td>\n"
"                        <td>&nbsp;Add a Tool (when in Geometry Selected Tab "
"or in Tools NCC or Tools Paint)</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>V</strong></td>\n"
"                        <td>&nbsp;Zoom Fit</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>X</strong></td>\n"
"                        <td>&nbsp;Flip on X_axis</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>Y</strong></td>\n"
"                        <td>&nbsp;Flip on Y_axis</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>&#39;=&#39;</strong></td>\n"
"                        <td>&nbsp;Zoom Out</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>&#39;-&#39;</strong></td>\n"
"                        <td>&nbsp;Zoom In</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\">&nbsp;</td>\n"
"                        <td>&nbsp;</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>CTRL+A</strong></td>\n"
"                        <td>&nbsp;Select All</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>CTRL+C</strong></td>\n"
"                        <td>&nbsp;Copy Obj</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>CTRL+E</strong></td>\n"
"                        <td>&nbsp;Open Excellon File</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>CTRL+G</strong></td>\n"
"                        <td>&nbsp;Open Gerber File</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>CTRL+N</strong></td>\n"
"                        <td>&nbsp;New Project</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>CTRL+M</strong></td>\n"
"                        <td>&nbsp;Measurement Tool</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>CTRL+O</strong></td>\n"
"                        <td>&nbsp;Open Project</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>CTRL+S</strong></td>\n"
"                        <td>&nbsp;Save Project As</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>CTRL+F10</strong></td>\n"
"                        <td>&nbsp;Toggle Plot Area</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\">&nbsp;</td>\n"
"                        <td>&nbsp;</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>SHIFT+C</strong></td>\n"
"                        <td>&nbsp;Copy Obj_Name</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>SHIFT+E</strong></td>\n"
"                        <td>&nbsp;Toggle Code Editor</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>SHIFT+G</strong></td>\n"
"                        <td>&nbsp;Toggle the axis</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>SHIFT+P</strong></td>\n"
"                        <td>&nbsp;Open Preferences Window</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>SHIFT+R</strong></td>\n"
"                        <td>&nbsp;Rotate by 90 degree CCW</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>SHIFT+S</strong></td>\n"
"                        <td>&nbsp;Run a Script</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>SHIFT+W</strong></td>\n"
"                        <td>&nbsp;Toggle the workspace</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>SHIFT+X</strong></td>\n"
"                        <td>&nbsp;Skew on X axis</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>SHIFT+Y</strong></td>\n"
"                        <td>&nbsp;Skew on Y axis</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\">&nbsp;</td>\n"
"                        <td>&nbsp;</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>ALT+C</strong></td>\n"
"                        <td>&nbsp;Calculators Tool</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>ALT+D</strong></td>\n"
"                        <td>&nbsp;2-Sided PCB Tool</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>ALT+K</strong></td>\n"
"                        <td>&nbsp;Solder Paste Dispensing Tool</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>ALT+L</strong></td>\n"
"                        <td>&nbsp;Film PCB Tool</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>ALT+N</strong></td>\n"
"                        <td>&nbsp;Non-Copper Clearing Tool</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>ALT+P</strong></td>\n"
"                        <td>&nbsp;Paint Area Tool</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>ALT+Q</strong></td>\n"
"                        <td>&nbsp;PDF Import Tool</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>ALT+R</strong></td>\n"
"                        <td>&nbsp;Transformations Tool</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>ALT+S</strong></td>\n"
"                        <td>&nbsp;View File Source</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>ALT+U</strong></td>\n"
"                        <td>&nbsp;Cutout PCB Tool</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>ALT+1</strong></td>\n"
"                        <td>&nbsp;Enable all Plots</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>ALT+2</strong></td>\n"
"                        <td>&nbsp;Disable all Plots</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>ALT+3</strong></td>\n"
"                        <td>&nbsp;Disable Non-selected Plots</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>ALT+F10</strong></td>\n"
"                        <td>&nbsp;Toggle Full Screen</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\">&nbsp;</td>\n"
"                        <td>&nbsp;</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>F1</strong></td>\n"
"                        <td>&nbsp;Open Online Manual</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>F4</strong></td>\n"
"                        <td>&nbsp;Open Online Tutorials</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>Del</strong></td>\n"
"                        <td>&nbsp;Delete Object</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>Del</strong></td>\n"
"                        <td>&nbsp;Alternate: Delete Tool</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>'`'</strong></td>\n"
"                        <td>&nbsp;(left to Key_1)Toogle Notebook Area (Left "
"Side)</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>SPACE</strong></td>\n"
"                        <td>&nbsp;En(Dis)able Obj Plot</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>Escape</strong></td>\n"
"                        <td>&nbsp;Deselects all objects</td>\n"
"                    </tr>\n"
"                </tbody>\n"
"            </table>\n"
"    \n"
"            "
msgstr ""
"<b>General Shortcut list</b><br>\n"
"            <table border=\"0\" cellpadding=\"0\" cellspacing=\"0\" style="
"\"width:283px\">\n"
"                <tbody>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\" width=\"89\"><strong>F3</strong></"
"td>\n"
"                        <td width=\"194\"><span style=\"color:"
"#006400\"><strong>&nbsp;SHOW SHORTCUT LIST</strong></span></td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\">&nbsp;</td>\n"
"                        <td>&nbsp;</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>1</strong></td>\n"
"                        <td>&nbsp;Switch to Project Tab</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>2</strong></td>\n"
"                        <td>&nbsp;Switch to Selected Tab</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>3</strong></td>\n"
"                        <td>&nbsp;Switch to Tool Tab</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\">&nbsp;</td>\n"
"                        <td>&nbsp;</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>B</strong></td>\n"
"                        <td>&nbsp;New Gerber</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>E</strong></td>\n"
"                        <td>&nbsp;Edit Object (if selected)</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>G</strong></td>\n"
"                        <td>&nbsp;Grid On/Off</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>J</strong></td>\n"
"                        <td>&nbsp;Jump to Coordinates</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>L</strong></td>\n"
"                        <td>&nbsp;New Excellon</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>M</strong></td>\n"
"                        <td>&nbsp;Move Obj</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>N</strong></td>\n"
"                        <td>&nbsp;New Geometry</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>O</strong></td>\n"
"                        <td>&nbsp;Set Origin</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>Q</strong></td>\n"
"                        <td>&nbsp;Change Units</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>P</strong></td>\n"
"                        <td>&nbsp;Open Properties Tool</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>R</strong></td>\n"
"                        <td>&nbsp;Rotate by 90 degree CW</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>S</strong></td>\n"
"                        <td>&nbsp;Shell Toggle</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>T</strong></td>\n"
"                        <td>&nbsp;Add a Tool (when in Geometry Selected Tab "
"or in Tools NCC or Tools Paint)</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>V</strong></td>\n"
"                        <td>&nbsp;Zoom Fit</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>X</strong></td>\n"
"                        <td>&nbsp;Flip on X_axis</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>Y</strong></td>\n"
"                        <td>&nbsp;Flip on Y_axis</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>&#39;=&#39;</strong></td>\n"
"                        <td>&nbsp;Zoom Out</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>&#39;-&#39;</strong></td>\n"
"                        <td>&nbsp;Zoom In</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\">&nbsp;</td>\n"
"                        <td>&nbsp;</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>CTRL+A</strong></td>\n"
"                        <td>&nbsp;Select All</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>CTRL+C</strong></td>\n"
"                        <td>&nbsp;Copy Obj</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>CTRL+E</strong></td>\n"
"                        <td>&nbsp;Open Excellon File</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>CTRL+G</strong></td>\n"
"                        <td>&nbsp;Open Gerber File</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>CTRL+N</strong></td>\n"
"                        <td>&nbsp;New Project</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>CTRL+M</strong></td>\n"
"                        <td>&nbsp;Measurement Tool</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>CTRL+O</strong></td>\n"
"                        <td>&nbsp;Open Project</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>CTRL+S</strong></td>\n"
"                        <td>&nbsp;Save Project As</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>CTRL+F10</strong></td>\n"
"                        <td>&nbsp;Toggle Plot Area</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\">&nbsp;</td>\n"
"                        <td>&nbsp;</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>SHIFT+C</strong></td>\n"
"                        <td>&nbsp;Copy Obj_Name</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>SHIFT+E</strong></td>\n"
"                        <td>&nbsp;Toggle Code Editor</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>SHIFT+G</strong></td>\n"
"                        <td>&nbsp;Toggle the axis</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>SHIFT+P</strong></td>\n"
"                        <td>&nbsp;Open Preferences Window</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>SHIFT+R</strong></td>\n"
"                        <td>&nbsp;Rotate by 90 degree CCW</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>SHIFT+S</strong></td>\n"
"                        <td>&nbsp;Run a Script</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>SHIFT+W</strong></td>\n"
"                        <td>&nbsp;Toggle the workspace</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>SHIFT+X</strong></td>\n"
"                        <td>&nbsp;Skew on X axis</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>SHIFT+Y</strong></td>\n"
"                        <td>&nbsp;Skew on Y axis</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\">&nbsp;</td>\n"
"                        <td>&nbsp;</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>ALT+C</strong></td>\n"
"                        <td>&nbsp;Calculators Tool</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>ALT+D</strong></td>\n"
"                        <td>&nbsp;2-Sided PCB Tool</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>ALT+K</strong></td>\n"
"                        <td>&nbsp;Solder Paste Dispensing Tool</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>ALT+L</strong></td>\n"
"                        <td>&nbsp;Film PCB Tool</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>ALT+N</strong></td>\n"
"                        <td>&nbsp;Non-Copper Clearing Tool</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>ALT+P</strong></td>\n"
"                        <td>&nbsp;Paint Area Tool</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>ALT+Q</strong></td>\n"
"                        <td>&nbsp;PDF Import Tool</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>ALT+R</strong></td>\n"
"                        <td>&nbsp;Transformations Tool</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>ALT+S</strong></td>\n"
"                        <td>&nbsp;View File Source</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>ALT+U</strong></td>\n"
"                        <td>&nbsp;Cutout PCB Tool</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>ALT+1</strong></td>\n"
"                        <td>&nbsp;Enable all Plots</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>ALT+2</strong></td>\n"
"                        <td>&nbsp;Disable all Plots</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>ALT+3</strong></td>\n"
"                        <td>&nbsp;Disable Non-selected Plots</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>ALT+F10</strong></td>\n"
"                        <td>&nbsp;Toggle Full Screen</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\">&nbsp;</td>\n"
"                        <td>&nbsp;</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>F1</strong></td>\n"
"                        <td>&nbsp;Open Online Manual</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>F4</strong></td>\n"
"                        <td>&nbsp;Open Online Tutorials</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>Del</strong></td>\n"
"                        <td>&nbsp;Delete Object</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>Del</strong></td>\n"
"                        <td>&nbsp;Alternate: Delete Tool</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>'`'</strong></td>\n"
"                        <td>&nbsp;(left to Key_1)Toogle Notebook Area (Left "
"Side)</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>SPACE</strong></td>\n"
"                        <td>&nbsp;En(Dis)able Obj Plot</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>Escape</strong></td>\n"
"                        <td>&nbsp;Deselects all objects</td>\n"
"                    </tr>\n"
"                </tbody>\n"
"            </table>\n"
"    \n"
"            "

#: flatcamGUI/FlatCAMGUI.py:1267
msgid ""
"<b>Editor Shortcut list</b><br>\n"
"            <br>\n"
"            <strong><span style=\"color:#0000ff\">GEOMETRY EDITOR</span></"
"strong><br>\n"
"    \n"
"            <table border=\"0\" cellpadding=\"0\" cellspacing=\"0\" style="
"\"width:283px\">\n"
"                <tbody>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\" width=\"89\"><strong>A</strong></"
"td>\n"
"                        <td width=\"194\">&nbsp;Draw an Arc</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>B</strong></td>\n"
"                        <td>&nbsp;Buffer Tool</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>C</strong></td>\n"
"                        <td>&nbsp;Copy Geo Item</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>D</strong></td>\n"
"                        <td>&nbsp;Within Add Arc will toogle the ARC "
"direction: CW or CCW</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>E</strong></td>\n"
"                        <td>&nbsp;Polygon Intersection Tool</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>I</strong></td>\n"
"                        <td>&nbsp;Paint Tool</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>J</strong></td>\n"
"                        <td>&nbsp;Jump to Location (x, y)</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>K</strong></td>\n"
"                        <td>&nbsp;Toggle Corner Snap</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>M</strong></td>\n"
"                        <td>&nbsp;Move Geo Item</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>M</strong></td>\n"
"                        <td>&nbsp;Within Add Arc will cycle through the ARC "
"modes</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>N</strong></td>\n"
"                        <td>&nbsp;Draw a Polygon</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>O</strong></td>\n"
"                        <td>&nbsp;Draw a Circle</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>P</strong></td>\n"
"                        <td>&nbsp;Draw a Path</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>R</strong></td>\n"
"                        <td>&nbsp;Draw Rectangle</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>S</strong></td>\n"
"                        <td>&nbsp;Polygon Substraction Tool</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>T</strong></td>\n"
"                        <td>&nbsp;Add Text Tool</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>U</strong></td>\n"
"                        <td>&nbsp;Polygon Union Tool</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>X</strong></td>\n"
"                        <td>&nbsp;Flip shape on X axis</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>Y</strong></td>\n"
"                        <td>&nbsp;Flip shape on Y axis</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\">&nbsp;</td>\n"
"                        <td>&nbsp;</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>SHIFT+X</strong></td>\n"
"                        <td>&nbsp;Skew shape on X axis</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>SHIFT+Y</strong></td>\n"
"                        <td>&nbsp;Skew shape on Y axis</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\">&nbsp;</td>\n"
"                        <td>&nbsp;</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>ALT+R</strong></td>\n"
"                        <td>&nbsp;Editor Transformation Tool</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>ALT+X</strong></td>\n"
"                        <td>&nbsp;Offset shape on X axis</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>ALT+Y</strong></td>\n"
"                        <td>&nbsp;Offset shape on Y axis</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\">&nbsp;</td>\n"
"                        <td>&nbsp;</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>CTRL+M</strong></td>\n"
"                        <td>&nbsp;Measurement Tool</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>CTRL+S</strong></td>\n"
"                        <td>&nbsp;Save Object and Exit Editor</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>CTRL+X</strong></td>\n"
"                        <td>&nbsp;Polygon Cut Tool</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\">&nbsp;</td>\n"
"                        <td>&nbsp;</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>Space</strong></td>\n"
"                        <td>&nbsp;Rotate Geometry</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>ENTER</strong></td>\n"
"                        <td>&nbsp;Finish drawing for certain tools</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>ESC</strong></td>\n"
"                        <td>&nbsp;Abort and return to Select</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>Del</strong></td>\n"
"                        <td>&nbsp;Delete Shape</td>\n"
"                    </tr>\n"
"                </tbody>\n"
"            </table>\n"
"            <br>\n"
"            <br>\n"
"            <strong><span style=\"color:#ff0000\">EXCELLON EDITOR</span></"
"strong><br>\n"
"            <table border=\"0\" cellpadding=\"0\" cellspacing=\"0\" style="
"\"width:283px\">\n"
"                <tbody>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\" width=\"89\"><strong>A</strong></"
"td>\n"
"                        <td width=\"194\">&nbsp;Add Drill Array</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>C</strong></td>\n"
"                        <td>&nbsp;Copy Drill(s)</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>D</strong></td>\n"
"                        <td>&nbsp;Add Drill</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>J</strong></td>\n"
"                        <td>&nbsp;Jump to Location (x, y)</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>M</strong></td>\n"
"                        <td>&nbsp;Move Drill(s)</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>R</strong></td>\n"
"                        <td>&nbsp;Resize Drill(s)</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>T</strong></td>\n"
"                        <td>&nbsp;Add a new Tool</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\">&nbsp;</td>\n"
"                        <td>&nbsp;</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>Del</strong></td>\n"
"                        <td>&nbsp;Delete Drill(s)</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>Del</strong></td>\n"
"                        <td>&nbsp;Alternate: Delete Tool(s)</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\">&nbsp;</td>\n"
"                        <td>&nbsp;</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>ESC</strong></td>\n"
"                        <td>&nbsp;Abort and return to Select</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>CTRL+S</strong></td>\n"
"                        <td>&nbsp;Save Object and Exit Editor</td>\n"
"                    </tr>\n"
"                </tbody>\n"
"            </table>\n"
"            <br>\n"
"            <br>\n"
"            <strong><span style=\"color:#00ff00\">GERBER EDITOR</span></"
"strong><br>\n"
"            <table border=\"0\" cellpadding=\"0\" cellspacing=\"0\" style="
"\"width:283px\">\n"
"                <tbody>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\" width=\"89\"><strong>A</strong></"
"td>\n"
"                        <td width=\"194\">&nbsp;Add Pad Array</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>B</strong></td>\n"
"                        <td>&nbsp;Buffer</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>C</strong></td>\n"
"                        <td>&nbsp;Copy</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>D</strong></td>\n"
"                        <td>&nbsp;Add Disc</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>E</strong></td>\n"
"                        <td>&nbsp;Add SemiDisc</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>J</strong></td>\n"
"                        <td>&nbsp;Jump to Location (x, y)</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>M</strong></td>\n"
"                        <td>&nbsp;Move</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>N</strong></td>\n"
"                        <td>&nbsp;Add Region</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>P</strong></td>\n"
"                        <td>&nbsp;Add Pad</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>R</strong></td>\n"
"                        <td>&nbsp;Within Track & Region Tools will cycle in "
"REVERSE the bend modes</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>S</strong></td>\n"
"                        <td>&nbsp;Scale</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>T</strong></td>\n"
"                        <td>&nbsp;Add Track</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>T</strong></td>\n"
"                        <td>&nbsp;Within Track & Region Tools will cycle "
"FORWARD the bend modes</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\">&nbsp;</td>\n"
"                        <td>&nbsp;</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>Del</strong></td>\n"
"                        <td>&nbsp;Delete</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>Del</strong></td>\n"
"                        <td>&nbsp;Alternate: Delete Apertures</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\">&nbsp;</td>\n"
"                        <td>&nbsp;</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>ESC</strong></td>\n"
"                        <td>&nbsp;Abort and return to Select</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>CTRL+S</strong></td>\n"
"                        <td>&nbsp;Save Object and Exit Editor</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\">&nbsp;</td>\n"
"                        <td>&nbsp;</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>ALT+R</strong></td>\n"
"                        <td>&nbsp;Transformation Tool</td>\n"
"                    </tr>\n"
"                </tbody>\n"
"            </table>\n"
"                    "
msgstr ""
"<b>Editor Shortcut list</b><br>\n"
"            <br>\n"
"            <strong><span style=\"color:#0000ff\">GEOMETRY EDITOR</span></"
"strong><br>\n"
"    \n"
"            <table border=\"0\" cellpadding=\"0\" cellspacing=\"0\" style="
"\"width:283px\">\n"
"                <tbody>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\" width=\"89\"><strong>A</strong></"
"td>\n"
"                        <td width=\"194\">&nbsp;Draw an Arc</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>B</strong></td>\n"
"                        <td>&nbsp;Buffer Tool</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>C</strong></td>\n"
"                        <td>&nbsp;Copy Geo Item</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>D</strong></td>\n"
"                        <td>&nbsp;Within Add Arc will toogle the ARC "
"direction: CW or CCW</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>E</strong></td>\n"
"                        <td>&nbsp;Polygon Intersection Tool</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>I</strong></td>\n"
"                        <td>&nbsp;Paint Tool</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>J</strong></td>\n"
"                        <td>&nbsp;Jump to Location (x, y)</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>K</strong></td>\n"
"                        <td>&nbsp;Toggle Corner Snap</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>M</strong></td>\n"
"                        <td>&nbsp;Move Geo Item</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>M</strong></td>\n"
"                        <td>&nbsp;Within Add Arc will cycle through the ARC "
"modes</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>N</strong></td>\n"
"                        <td>&nbsp;Draw a Polygon</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>O</strong></td>\n"
"                        <td>&nbsp;Draw a Circle</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>P</strong></td>\n"
"                        <td>&nbsp;Draw a Path</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>R</strong></td>\n"
"                        <td>&nbsp;Draw Rectangle</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>S</strong></td>\n"
"                        <td>&nbsp;Polygon Substraction Tool</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>T</strong></td>\n"
"                        <td>&nbsp;Add Text Tool</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>U</strong></td>\n"
"                        <td>&nbsp;Polygon Union Tool</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>X</strong></td>\n"
"                        <td>&nbsp;Flip shape on X axis</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>Y</strong></td>\n"
"                        <td>&nbsp;Flip shape on Y axis</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\">&nbsp;</td>\n"
"                        <td>&nbsp;</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>SHIFT+X</strong></td>\n"
"                        <td>&nbsp;Skew shape on X axis</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>SHIFT+Y</strong></td>\n"
"                        <td>&nbsp;Skew shape on Y axis</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\">&nbsp;</td>\n"
"                        <td>&nbsp;</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>ALT+R</strong></td>\n"
"                        <td>&nbsp;Editor Transformation Tool</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>ALT+X</strong></td>\n"
"                        <td>&nbsp;Offset shape on X axis</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>ALT+Y</strong></td>\n"
"                        <td>&nbsp;Offset shape on Y axis</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\">&nbsp;</td>\n"
"                        <td>&nbsp;</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>CTRL+M</strong></td>\n"
"                        <td>&nbsp;Measurement Tool</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>CTRL+S</strong></td>\n"
"                        <td>&nbsp;Save Object and Exit Editor</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>CTRL+X</strong></td>\n"
"                        <td>&nbsp;Polygon Cut Tool</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\">&nbsp;</td>\n"
"                        <td>&nbsp;</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>Space</strong></td>\n"
"                        <td>&nbsp;Rotate Geometry</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>ENTER</strong></td>\n"
"                        <td>&nbsp;Finish drawing for certain tools</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>ESC</strong></td>\n"
"                        <td>&nbsp;Abort and return to Select</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>Del</strong></td>\n"
"                        <td>&nbsp;Delete Shape</td>\n"
"                    </tr>\n"
"                </tbody>\n"
"            </table>\n"
"            <br>\n"
"            <br>\n"
"            <strong><span style=\"color:#ff0000\">EXCELLON EDITOR</span></"
"strong><br>\n"
"            <table border=\"0\" cellpadding=\"0\" cellspacing=\"0\" style="
"\"width:283px\">\n"
"                <tbody>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\" width=\"89\"><strong>A</strong></"
"td>\n"
"                        <td width=\"194\">&nbsp;Add Drill Array</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>C</strong></td>\n"
"                        <td>&nbsp;Copy Drill(s)</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>D</strong></td>\n"
"                        <td>&nbsp;Add Drill</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>J</strong></td>\n"
"                        <td>&nbsp;Jump to Location (x, y)</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>M</strong></td>\n"
"                        <td>&nbsp;Move Drill(s)</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>R</strong></td>\n"
"                        <td>&nbsp;Resize Drill(s)</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>T</strong></td>\n"
"                        <td>&nbsp;Add a new Tool</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\">&nbsp;</td>\n"
"                        <td>&nbsp;</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>Del</strong></td>\n"
"                        <td>&nbsp;Delete Drill(s)</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>Del</strong></td>\n"
"                        <td>&nbsp;Alternate: Delete Tool(s)</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\">&nbsp;</td>\n"
"                        <td>&nbsp;</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>ESC</strong></td>\n"
"                        <td>&nbsp;Abort and return to Select</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>CTRL+S</strong></td>\n"
"                        <td>&nbsp;Save Object and Exit Editor</td>\n"
"                    </tr>\n"
"                </tbody>\n"
"            </table>\n"
"            <br>\n"
"            <br>\n"
"            <strong><span style=\"color:#00ff00\">GERBER EDITOR</span></"
"strong><br>\n"
"            <table border=\"0\" cellpadding=\"0\" cellspacing=\"0\" style="
"\"width:283px\">\n"
"                <tbody>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\" width=\"89\"><strong>A</strong></"
"td>\n"
"                        <td width=\"194\">&nbsp;Add Pad Array</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>B</strong></td>\n"
"                        <td>&nbsp;Buffer</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>C</strong></td>\n"
"                        <td>&nbsp;Copy</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>D</strong></td>\n"
"                        <td>&nbsp;Add Disc</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>E</strong></td>\n"
"                        <td>&nbsp;Add SemiDisc</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>J</strong></td>\n"
"                        <td>&nbsp;Jump to Location (x, y)</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>M</strong></td>\n"
"                        <td>&nbsp;Move</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>N</strong></td>\n"
"                        <td>&nbsp;Add Region</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>P</strong></td>\n"
"                        <td>&nbsp;Add Pad</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>R</strong></td>\n"
"                        <td>&nbsp;Within Track & Region Tools will cycle in "
"REVERSE the bend modes</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>S</strong></td>\n"
"                        <td>&nbsp;Scale</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>T</strong></td>\n"
"                        <td>&nbsp;Add Track</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>T</strong></td>\n"
"                        <td>&nbsp;Within Track & Region Tools will cycle "
"FORWARD the bend modes</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\">&nbsp;</td>\n"
"                        <td>&nbsp;</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>Del</strong></td>\n"
"                        <td>&nbsp;Delete</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>Del</strong></td>\n"
"                        <td>&nbsp;Alternate: Delete Apertures</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\">&nbsp;</td>\n"
"                        <td>&nbsp;</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>ESC</strong></td>\n"
"                        <td>&nbsp;Abort and return to Select</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>CTRL+S</strong></td>\n"
"                        <td>&nbsp;Save Object and Exit Editor</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\">&nbsp;</td>\n"
"                        <td>&nbsp;</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>ALT+R</strong></td>\n"
"                        <td>&nbsp;Transformation Tool</td>\n"
"                    </tr>\n"
"                </tbody>\n"
"            </table>\n"
"                    "

#: flatcamGUI/FlatCAMGUI.py:1579
msgid "Disable"
msgstr "Disable"

#: flatcamGUI/FlatCAMGUI.py:1581
msgid "New"
msgstr "New"

#: flatcamGUI/FlatCAMGUI.py:1582
msgid "Geometry"
msgstr "Geometry"

#: flatcamGUI/FlatCAMGUI.py:1584
msgid "Excellon"
msgstr "Excellon"

#: flatcamGUI/FlatCAMGUI.py:1589
msgid "Grids"
msgstr "Grids"

#: flatcamGUI/FlatCAMGUI.py:1591
msgid "View"
msgstr "View"

#: flatcamGUI/FlatCAMGUI.py:1593
msgid "Clear Plot"
msgstr "Clear Plot"

#: flatcamGUI/FlatCAMGUI.py:1594
msgid "Replot"
msgstr "Replot"

#: flatcamGUI/FlatCAMGUI.py:1597
msgid "Geo Editor"
msgstr "Geo Editor"

#: flatcamGUI/FlatCAMGUI.py:1598
msgid "Line"
msgstr "Line"

#: flatcamGUI/FlatCAMGUI.py:1599
msgid "Rectangle"
msgstr "Rectangle"

#: flatcamGUI/FlatCAMGUI.py:1600
msgid "Cut"
msgstr "Cut"

#: flatcamGUI/FlatCAMGUI.py:1605
msgid "Pad"
msgstr "Pad"

#: flatcamGUI/FlatCAMGUI.py:1606
msgid "Pad Array"
msgstr "Pad Array"

#: flatcamGUI/FlatCAMGUI.py:1607
msgid "Track"
msgstr "Track"

#: flatcamGUI/FlatCAMGUI.py:1608
msgid "Region"
msgstr "Region"

#: flatcamGUI/FlatCAMGUI.py:1610
msgid "Exc Editor"
msgstr "Exc Editor"

#: flatcamGUI/FlatCAMGUI.py:1611
msgid "Add Drill"
msgstr "Add Drill"

#: flatcamGUI/FlatCAMGUI.py:1643
msgid "Print Preview"
msgstr "Print Preview"

#: flatcamGUI/FlatCAMGUI.py:1644
msgid "Print Code"
msgstr "Print Code"

#: flatcamGUI/FlatCAMGUI.py:1645
msgid "Find in Code"
msgstr "Find in Code"

#: flatcamGUI/FlatCAMGUI.py:1650
msgid "Replace With"
msgstr "Replace With"

#: flatcamGUI/FlatCAMGUI.py:1654
msgid "All"
msgstr "All"

#: flatcamGUI/FlatCAMGUI.py:1656
msgid ""
"When checked it will replace all instances in the 'Find' box\n"
"with the text in the 'Replace' box.."
msgstr ""
"When checked it will replace all instances in the 'Find' box\n"
"with the text in the 'Replace' box.."

#: flatcamGUI/FlatCAMGUI.py:1659
msgid "Open Code"
msgstr "Open Code"

#: flatcamGUI/FlatCAMGUI.py:1660
msgid "Save Code"
msgstr "Save Code"

#: flatcamGUI/FlatCAMGUI.py:1695
msgid ""
"Relative neasurement.\n"
"Reference is last click position"
msgstr ""
"Relative neasurement.\n"
"Reference is last click position"

#: flatcamGUI/FlatCAMGUI.py:1701
msgid ""
"Absolute neasurement.\n"
"Reference is (X=0, Y= 0) position"
msgstr ""
"Absolute neasurement.\n"
"Reference is (X=0, Y= 0) position"

#: flatcamGUI/FlatCAMGUI.py:1896
msgid "Select 'Esc'"
msgstr "Select 'Esc'"

#: flatcamGUI/FlatCAMGUI.py:1921
msgid "Copy Objects"
msgstr "Copy Objects"

#: flatcamGUI/FlatCAMGUI.py:1923
msgid "Delete Shape"
msgstr "Delete Shape"

#: flatcamGUI/FlatCAMGUI.py:1928
msgid "Move Objects"
msgstr "Move Objects"

#: flatcamGUI/FlatCAMGUI.py:2358
msgid ""
"Please first select a geometry item to be cutted\n"
"then select the geometry item that will be cutted\n"
"out of the first item. In the end press ~X~ key or\n"
"the toolbar button."
msgstr ""
"Please first select a geometry item to be cutted\n"
"then select the geometry item that will be cutted\n"
"out of the first item. In the end press ~X~ key or\n"
"the toolbar button."

#: flatcamGUI/FlatCAMGUI.py:2365 flatcamGUI/FlatCAMGUI.py:2502
#: flatcamGUI/FlatCAMGUI.py:2561 flatcamGUI/FlatCAMGUI.py:2581
msgid "Warning"
msgstr "Warning"

#: flatcamGUI/FlatCAMGUI.py:2432 flatcamGUI/FlatCAMGUI.py:2631
#: flatcamGUI/FlatCAMGUI.py:2842
msgid "[WARNING_NOTCL] Cancelled."
msgstr "[WARNING_NOTCL] Cancelled."

#: flatcamGUI/FlatCAMGUI.py:2497
msgid ""
"Please select geometry items \n"
"on which to perform Intersection Tool."
msgstr ""
"Please select geometry items \n"
"on which to perform Intersection Tool."

#: flatcamGUI/FlatCAMGUI.py:2556
msgid ""
"Please select geometry items \n"
"on which to perform Substraction Tool."
msgstr ""
"Please select geometry items \n"
"on which to perform Substraction Tool."

#: flatcamGUI/FlatCAMGUI.py:2576
msgid ""
"Please select geometry items \n"
"on which to perform union."
msgstr ""
"Please select geometry items \n"
"on which to perform union."

#: flatcamGUI/FlatCAMGUI.py:2647 flatcamGUI/FlatCAMGUI.py:2859
msgid "[WARNING_NOTCL] Cancelled. Nothing selected to delete."
msgstr "[WARNING_NOTCL] Cancelled. Nothing selected to delete."

#: flatcamGUI/FlatCAMGUI.py:2731 flatcamGUI/FlatCAMGUI.py:2926
msgid "[WARNING_NOTCL] Cancelled. Nothing selected to copy."
msgstr "[WARNING_NOTCL] Cancelled. Nothing selected to copy."

#: flatcamGUI/FlatCAMGUI.py:2777 flatcamGUI/FlatCAMGUI.py:2972
msgid "[WARNING_NOTCL] Cancelled. Nothing selected to move."
msgstr "[WARNING_NOTCL] Cancelled. Nothing selected to move."

#: flatcamGUI/FlatCAMGUI.py:2986
msgid "New Tool ..."
msgstr "New Tool ..."

#: flatcamGUI/FlatCAMGUI.py:2987
msgid "Enter a Tool Diameter:"
msgstr "Enter a Tool Diameter:"

#: flatcamGUI/FlatCAMGUI.py:3029
msgid "Measurement Tool exit..."
msgstr "Measurement Tool exit..."

#: flatcamGUI/FlatCAMGUI.py:3324
msgid "Grid X value:"
msgstr "Grid X value:"

#: flatcamGUI/FlatCAMGUI.py:3326
msgid "This is the Grid snap value on X axis."
msgstr "This is the Grid snap value on X axis."

#: flatcamGUI/FlatCAMGUI.py:3331
msgid "Grid Y value:"
msgstr "Grid Y value:"

#: flatcamGUI/FlatCAMGUI.py:3333
msgid "This is the Grid snap value on Y axis."
msgstr "This is the Grid snap value on Y axis."

#: flatcamGUI/FlatCAMGUI.py:3338
msgid "Snap Max:"
msgstr "Snap Max:"

#: flatcamGUI/FlatCAMGUI.py:3343
msgid "Workspace:"
msgstr "Workspace:"

#: flatcamGUI/FlatCAMGUI.py:3345
msgid ""
"Draw a delimiting rectangle on canvas.\n"
"The purpose is to illustrate the limits for our work."
msgstr ""
"Draw a delimiting rectangle on canvas.\n"
"The purpose is to illustrate the limits for our work."

#: flatcamGUI/FlatCAMGUI.py:3348
msgid "Wk. format:"
msgstr "Wk. format:"

#: flatcamGUI/FlatCAMGUI.py:3350
msgid ""
"Select the type of rectangle to be used on canvas,\n"
"as valid workspace."
msgstr ""
"Select the type of rectangle to be used on canvas,\n"
"as valid workspace."

#: flatcamGUI/FlatCAMGUI.py:3363
msgid "Plot Fill:"
msgstr "Plot Fill:"

#: flatcamGUI/FlatCAMGUI.py:3365
msgid ""
"Set the fill color for plotted objects.\n"
"First 6 digits are the color and the last 2\n"
"digits are for alpha (transparency) level."
msgstr ""
"Set the fill color for plotted objects.\n"
"First 6 digits are the color and the last 2\n"
"digits are for alpha (transparency) level."

#: flatcamGUI/FlatCAMGUI.py:3379 flatcamGUI/FlatCAMGUI.py:3429
#: flatcamGUI/FlatCAMGUI.py:3479
msgid "Alpha Level:"
msgstr "Alpha Level:"

#: flatcamGUI/FlatCAMGUI.py:3381
msgid "Set the fill transparency for plotted objects."
msgstr "Set the fill transparency for plotted objects."

#: flatcamGUI/FlatCAMGUI.py:3398
msgid "Plot Line:"
msgstr "Plot Line:"

#: flatcamGUI/FlatCAMGUI.py:3400
msgid "Set the line color for plotted objects."
msgstr "Set the line color for plotted objects."

#: flatcamGUI/FlatCAMGUI.py:3412
msgid "Sel. Fill:"
msgstr "Sel. Fill:"

#: flatcamGUI/FlatCAMGUI.py:3414
msgid ""
"Set the fill color for the selection box\n"
"in case that the selection is done from left to right.\n"
"First 6 digits are the color and the last 2\n"
"digits are for alpha (transparency) level."
msgstr ""
"Set the fill color for the selection box\n"
"in case that the selection is done from left to right.\n"
"First 6 digits are the color and the last 2\n"
"digits are for alpha (transparency) level."

#: flatcamGUI/FlatCAMGUI.py:3431
msgid "Set the fill transparency for the 'left to right' selection box."
msgstr "Set the fill transparency for the 'left to right' selection box."

#: flatcamGUI/FlatCAMGUI.py:3448
msgid "Sel. Line:"
msgstr "Sel. Line:"

#: flatcamGUI/FlatCAMGUI.py:3450
msgid "Set the line color for the 'left to right' selection box."
msgstr "Set the line color for the 'left to right' selection box."

#: flatcamGUI/FlatCAMGUI.py:3462
msgid "Sel2. Fill:"
msgstr "Sel2. Fill:"

#: flatcamGUI/FlatCAMGUI.py:3464
msgid ""
"Set the fill color for the selection box\n"
"in case that the selection is done from right to left.\n"
"First 6 digits are the color and the last 2\n"
"digits are for alpha (transparency) level."
msgstr ""
"Set the fill color for the selection box\n"
"in case that the selection is done from right to left.\n"
"First 6 digits are the color and the last 2\n"
"digits are for alpha (transparency) level."

#: flatcamGUI/FlatCAMGUI.py:3481
msgid "Set the fill transparency for selection 'right to left' box."
msgstr "Set the fill transparency for selection 'right to left' box."

#: flatcamGUI/FlatCAMGUI.py:3498
msgid "Sel2. Line:"
msgstr "Sel2. Line:"

#: flatcamGUI/FlatCAMGUI.py:3500
msgid "Set the line color for the 'right to left' selection box."
msgstr "Set the line color for the 'right to left' selection box."

#: flatcamGUI/FlatCAMGUI.py:3512
msgid "Editor Draw:"
msgstr "Editor Draw:"

#: flatcamGUI/FlatCAMGUI.py:3514
msgid "Set the color for the shape."
msgstr "Set the color for the shape."

#: flatcamGUI/FlatCAMGUI.py:3526
msgid "Editor Draw Sel.:"
msgstr "Editor Draw Sel.:"

#: flatcamGUI/FlatCAMGUI.py:3528
msgid "Set the color of the shape when selected."
msgstr "Set the color of the shape when selected."

#: flatcamGUI/FlatCAMGUI.py:3540
msgid "Project Items:"
msgstr "Project Items:"

#: flatcamGUI/FlatCAMGUI.py:3542
msgid "Set the color of the items in Project Tab Tree."
msgstr "Set the color of the items in Project Tab Tree."

#: flatcamGUI/FlatCAMGUI.py:3553
msgid "Proj. Dis. Items:"
msgstr "Proj. Dis. Items:"

#: flatcamGUI/FlatCAMGUI.py:3555
msgid ""
"Set the color of the items in Project Tab Tree,\n"
"for the case when the items are disabled."
msgstr ""
"Set the color of the items in Project Tab Tree,\n"
"for the case when the items are disabled."

#: flatcamGUI/FlatCAMGUI.py:3606
msgid "GUI Settings"
msgstr "GUI Settings"

#: flatcamGUI/FlatCAMGUI.py:3613
msgid "Layout:"
msgstr "Layout:"

#: flatcamGUI/FlatCAMGUI.py:3615
msgid ""
"Select an layout for FlatCAM.\n"
"It is applied immediately."
msgstr ""
"Select an layout for FlatCAM.\n"
"It is applied immediately."

#: flatcamGUI/FlatCAMGUI.py:3631
msgid "Style:"
msgstr "Style:"

#: flatcamGUI/FlatCAMGUI.py:3633
msgid ""
"Select an style for FlatCAM.\n"
"It will be applied at the next app start."
msgstr ""
"Select an style for FlatCAM.\n"
"It will be applied at the next app start."

#: flatcamGUI/FlatCAMGUI.py:3644
msgid "HDPI Support:"
msgstr "HDPI Support:"

#: flatcamGUI/FlatCAMGUI.py:3646
msgid ""
"Enable High DPI support for FlatCAM.\n"
"It will be applied at the next app start."
msgstr ""
"Enable High DPI support for FlatCAM.\n"
"It will be applied at the next app start."

#: flatcamGUI/FlatCAMGUI.py:3659
msgid "Clear GUI Settings:"
msgstr "Clear GUI Settings:"

#: flatcamGUI/FlatCAMGUI.py:3661
msgid ""
"Clear the GUI settings for FlatCAM,\n"
"such as: layout, gui state, style, hdpi support etc."
msgstr ""
"Clear the GUI settings for FlatCAM,\n"
"such as: layout, gui state, style, hdpi support etc."

#: flatcamGUI/FlatCAMGUI.py:3664
msgid "Clear"
msgstr "Clear"

#: flatcamGUI/FlatCAMGUI.py:3668
msgid "Hover Shape:"
msgstr "Hover Shape:"

#: flatcamGUI/FlatCAMGUI.py:3670
msgid ""
"Enable display of a hover shape for FlatCAM objects.\n"
"It is displayed whenever the mouse cursor is hovering\n"
"over any kind of not-selected object."
msgstr ""
"Enable display of a hover shape for FlatCAM objects.\n"
"It is displayed whenever the mouse cursor is hovering\n"
"over any kind of not-selected object."

#: flatcamGUI/FlatCAMGUI.py:3677
msgid "Sel. Shape:"
msgstr "Sel. Shape:"

#: flatcamGUI/FlatCAMGUI.py:3679
msgid ""
"Enable the display of a selection shape for FlatCAM objects.\n"
"It is displayed whenever the mouse selects an object\n"
"either by clicking or dragging mouse from left to right or\n"
"right to left."
msgstr ""
"Enable the display of a selection shape for FlatCAM objects.\n"
"It is displayed whenever the mouse selects an object\n"
"either by clicking or dragging mouse from left to right or\n"
"right to left."

#: flatcamGUI/FlatCAMGUI.py:3721
msgid "Are you sure you want to delete the GUI Settings? \n"
msgstr "Are you sure you want to delete the GUI Settings? \n"

#: flatcamGUI/FlatCAMGUI.py:3724
msgid "Clear GUI Settings"
msgstr "Clear GUI Settings"

#: flatcamGUI/FlatCAMGUI.py:3745
msgid "App Preferences"
msgstr "App Preferences"

#: flatcamGUI/FlatCAMGUI.py:3751
msgid "<b>Units:</b>"
msgstr "<b>Units:</b>"

#: flatcamGUI/FlatCAMGUI.py:3752
msgid ""
"The default value for FlatCAM units.\n"
"Whatever is selected here is set every time\n"
"FLatCAM is started."
msgstr ""
"The default value for FlatCAM units.\n"
"Whatever is selected here is set every time\n"
"FLatCAM is started."

#: flatcamGUI/FlatCAMGUI.py:3759
msgid "<b>APP. LEVEL:</b>"
msgstr "<b>APP. LEVEL:</b>"

#: flatcamGUI/FlatCAMGUI.py:3760
msgid ""
"Choose the default level of usage for FlatCAM.\n"
"BASIC level -> reduced functionality, best for beginner's.\n"
"ADVANCED level -> full functionality.\n"
"\n"
"The choice here will influence the parameters in\n"
"the Selected Tab for all kinds of FlatCAM objects."
msgstr ""
"Choose the default level of usage for FlatCAM.\n"
"BASIC level -> reduced functionality, best for beginner's.\n"
"ADVANCED level -> full functionality.\n"
"\n"
"The choice here will influence the parameters in\n"
"the Selected Tab for all kinds of FlatCAM objects."

#: flatcamGUI/FlatCAMGUI.py:3769
msgid "<b>Languages:</b>"
msgstr "<b>Languages:</b>"

#: flatcamGUI/FlatCAMGUI.py:3770
msgid "Set the language used throughout FlatCAM."
msgstr "Set the language used throughout FlatCAM."

#: flatcamGUI/FlatCAMGUI.py:3773
msgid "Apply Language"
msgstr "Apply Language"

#: flatcamGUI/FlatCAMGUI.py:3774
msgid ""
"Set the language used throughout FlatCAM.\n"
"The app will restart after click.Windows: When FlatCAM is installed in "
"Program Files\n"
"directory, it is possible that the app will not\n"
"restart after the button is clicked due of Windows\n"
"security features. In this case the language will be\n"
"applied at the next app start."
msgstr ""
"Set the language used throughout FlatCAM.\n"
"The app will restart after click.Windows: When FlatCAM is installed in "
"Program Files\n"
"directory, it is possible that the app will not\n"
"restart after the button is clicked due of Windows\n"
"security features. In this case the language will be\n"
"applied at the next app start."

#: flatcamGUI/FlatCAMGUI.py:3783
msgid "Shell at StartUp:"
msgstr "Shell at StartUp:"

#: flatcamGUI/FlatCAMGUI.py:3785 flatcamGUI/FlatCAMGUI.py:3790
msgid ""
"Check this box if you want the shell to\n"
"start automatically at startup."
msgstr ""
"Check this box if you want the shell to\n"
"start automatically at startup."

#: flatcamGUI/FlatCAMGUI.py:3795
msgid "Version Check:"
msgstr "Version Check:"

#: flatcamGUI/FlatCAMGUI.py:3797 flatcamGUI/FlatCAMGUI.py:3802
msgid ""
"Check this box if you want to check\n"
"for a new version automatically at startup."
msgstr ""
"Check this box if you want to check\n"
"for a new version automatically at startup."

#: flatcamGUI/FlatCAMGUI.py:3807
msgid "Send Stats:"
msgstr "Send Stats:"

#: flatcamGUI/FlatCAMGUI.py:3809 flatcamGUI/FlatCAMGUI.py:3814
msgid ""
"Check this box if you agree to send anonymous\n"
"stats automatically at startup, to help improve FlatCAM."
msgstr ""
"Check this box if you agree to send anonymous\n"
"stats automatically at startup, to help improve FlatCAM."

#: flatcamGUI/FlatCAMGUI.py:3821
msgid "<b>Pan Button:</b>"
msgstr "<b>Pan Button:</b>"

#: flatcamGUI/FlatCAMGUI.py:3822
msgid ""
"Select the mouse button to use for panning:\n"
"- MMB --> Middle Mouse Button\n"
"- RMB --> Right Mouse Button"
msgstr ""
"Select the mouse button to use for panning:\n"
"- MMB --> Middle Mouse Button\n"
"- RMB --> Right Mouse Button"

#: flatcamGUI/FlatCAMGUI.py:3829
msgid "<b>Multiple Sel:</b>"
msgstr "<b>Multiple Sel:</b>"

#: flatcamGUI/FlatCAMGUI.py:3830
msgid "Select the key used for multiple selection."
msgstr "Select the key used for multiple selection."

#: flatcamGUI/FlatCAMGUI.py:3835
msgid "Project at StartUp:"
msgstr "Project at StartUp:"

#: flatcamGUI/FlatCAMGUI.py:3837 flatcamGUI/FlatCAMGUI.py:3842
msgid ""
"Check this box if you want the project/selected/tool tab area to\n"
"to be shown automatically at startup."
msgstr ""
"Check this box if you want the project/selected/tool tab area to\n"
"to be shown automatically at startup."

#: flatcamGUI/FlatCAMGUI.py:3847
msgid "Project AutoHide:"
msgstr "Project AutoHide:"

#: flatcamGUI/FlatCAMGUI.py:3849 flatcamGUI/FlatCAMGUI.py:3855
msgid ""
"Check this box if you want the project/selected/tool tab area to\n"
"hide automatically when there are no objects loaded and\n"
"to show whenever a new object is created."
msgstr ""
"Check this box if you want the project/selected/tool tab area to\n"
"hide automatically when there are no objects loaded and\n"
"to show whenever a new object is created."

#: flatcamGUI/FlatCAMGUI.py:3861
msgid "<b>Enable ToolTips:</b>"
msgstr "<b>Enable ToolTips:</b>"

#: flatcamGUI/FlatCAMGUI.py:3863 flatcamGUI/FlatCAMGUI.py:3868
msgid ""
"Check this box if you want to have toolTips displayed\n"
"when hovering with mouse over items throughout the App."
msgstr ""
"Check this box if you want to have toolTips displayed\n"
"when hovering with mouse over items throughout the App."

#: flatcamGUI/FlatCAMGUI.py:3871
msgid "Workers number:"
msgstr "Workers number:"

#: flatcamGUI/FlatCAMGUI.py:3873 flatcamGUI/FlatCAMGUI.py:3882
msgid ""
"The number of Qthreads made available to the App.\n"
"A bigger number may finish the jobs more quickly but\n"
"depending on your computer speed, may make the App\n"
"unresponsive. Can have a value between 2 and 16.\n"
"Default value is 2.\n"
"After change, it will be applied at next App start."
msgstr ""
"The number of Qthreads made available to the App.\n"
"A bigger number may finish the jobs more quickly but\n"
"depending on your computer speed, may make the App\n"
"unresponsive. Can have a value between 2 and 16.\n"
"Default value is 2.\n"
"After change, it will be applied at next App start."

#: flatcamGUI/FlatCAMGUI.py:3894 flatcamGUI/FlatCAMGUI.py:3903
msgid ""
"This value can counter the effect of the Circle Steps\n"
"parameter. Default value is 0.01.\n"
"A lower value will increase the detail both in image\n"
"and in Gcode for the circles, with a higher cost in\n"
"performance. Higher value will provide more\n"
"performance at the expense of level of detail."
msgstr ""
"This value can counter the effect of the Circle Steps\n"
"parameter. Default value is 0.01.\n"
"A lower value will increase the detail both in image\n"
"and in Gcode for the circles, with a higher cost in\n"
"performance. Higher value will provide more\n"
"performance at the expense of level of detail."

#: flatcamGUI/FlatCAMGUI.py:3939
#| msgid "Open Gerber"
msgid "\"Open\" behavior"
msgstr "\"Open\" behavior"

#: flatcamGUI/FlatCAMGUI.py:3941
msgid ""
"When checked the path for the last saved file is used when saving files,\n"
"and the path for the last opened file is used when opening files.\n"
"\n"
"When unchecked the path for opening files is the one used last: either the\n"
"path for saving files or the path for opening files."
msgstr ""
"When checked the path for the last saved file is used when saving files,\n"
"and the path for the last opened file is used when opening files.\n"
"\n"
"When unchecked the path for opening files is the one used last: either the\n"
"path for saving files or the path for opening files."

#: flatcamGUI/FlatCAMGUI.py:3950
msgid "Save Compressed Project"
msgstr "Save Compressed Project"

#: flatcamGUI/FlatCAMGUI.py:3952
msgid ""
"Whether to save a compressed or uncompressed project.\n"
"When checked it will save a compressed FlatCAM project."
msgstr ""
"Whether to save a compressed or uncompressed project.\n"
"When checked it will save a compressed FlatCAM project."

#: flatcamGUI/FlatCAMGUI.py:3963
msgid "Compression Level:"
msgstr "Compression Level:"

#: flatcamGUI/FlatCAMGUI.py:3965
msgid ""
"The level of compression used when saving\n"
"a FlatCAM project. Higher value means better compression\n"
"but require more RAM usage and more processing time."
msgstr ""
"The level of compression used when saving\n"
"a FlatCAM project. Higher value means better compression\n"
"but require more RAM usage and more processing time."

#: flatcamGUI/FlatCAMGUI.py:3991 flatcamGUI/FlatCAMGUI.py:4360
#: flatcamGUI/FlatCAMGUI.py:5030 flatcamGUI/FlatCAMGUI.py:5402
#: flatcamGUI/ObjectUI.py:150 flatcamGUI/ObjectUI.py:505
#: flatcamGUI/ObjectUI.py:833 flatcamGUI/ObjectUI.py:1350
msgid "<b>Plot Options:</b>"
msgstr "<b>Plot Options:</b>"

#: flatcamGUI/FlatCAMGUI.py:3998 flatcamGUI/FlatCAMGUI.py:4372
#: flatcamGUI/ObjectUI.py:156 flatcamGUI/ObjectUI.py:506
msgid "Solid"
msgstr "Solid"

#: flatcamGUI/FlatCAMGUI.py:4000 flatcamGUI/ObjectUI.py:158
msgid "Solid color polygons."
msgstr "Solid color polygons."

#: flatcamGUI/FlatCAMGUI.py:4005 flatcamGUI/ObjectUI.py:164
msgid "M-Color"
msgstr "M-Color"

#: flatcamGUI/FlatCAMGUI.py:4007 flatcamGUI/ObjectUI.py:166
msgid "Draw polygons in different colors."
msgstr "Draw polygons in different colors."

#: flatcamGUI/FlatCAMGUI.py:4012 flatcamGUI/FlatCAMGUI.py:4366
#: flatcamGUI/FlatCAMGUI.py:5034 flatcamGUI/ObjectUI.py:172
msgid "Plot"
msgstr "Plot"

#: flatcamGUI/FlatCAMGUI.py:4014 flatcamGUI/FlatCAMGUI.py:5036
#: flatcamGUI/ObjectUI.py:174 flatcamGUI/ObjectUI.py:546
#: flatcamGUI/ObjectUI.py:879 flatcamGUI/ObjectUI.py:1437
msgid "Plot (show) this object."
msgstr "Plot (show) this object."

#: flatcamGUI/FlatCAMGUI.py:4019 flatcamGUI/FlatCAMGUI.py:5043
#: flatcamGUI/FlatCAMGUI.py:5438
msgid "Circle Steps:"
msgstr "Circle Steps:"

#: flatcamGUI/FlatCAMGUI.py:4021
msgid ""
"The number of circle steps for Gerber \n"
"circular aperture linear approximation."
msgstr ""
"The number of circle steps for Gerber \n"
"circular aperture linear approximation."

#: flatcamGUI/FlatCAMGUI.py:4036
msgid "Gerber Options"
msgstr "Gerber Options"

#: flatcamGUI/FlatCAMGUI.py:4040 flatcamGUI/ObjectUI.py:251
msgid "<b>Isolation Routing:</b>"
msgstr "<b>Isolation Routing:</b>"

#: flatcamGUI/FlatCAMGUI.py:4042 flatcamGUI/ObjectUI.py:253
msgid ""
"Create a Geometry object with\n"
"toolpaths to cut outside polygons."
msgstr ""
"Create a Geometry object with\n"
"toolpaths to cut outside polygons."

#: flatcamGUI/FlatCAMGUI.py:4053 flatcamGUI/FlatCAMGUI.py:4753
#: flatcamGUI/FlatCAMGUI.py:5726 flatcamGUI/ObjectUI.py:788
#: flatcamGUI/ObjectUI.py:804
msgid "Diameter of the cutting tool."
msgstr "Diameter of the cutting tool."

#: flatcamGUI/FlatCAMGUI.py:4060
msgid "Width (# passes):"
msgstr "Width (# passes):"

#: flatcamGUI/FlatCAMGUI.py:4062 flatcamGUI/ObjectUI.py:275
msgid ""
"Width of the isolation gap in\n"
"number (integer) of tool widths."
msgstr ""
"Width of the isolation gap in\n"
"number (integer) of tool widths."

#: flatcamGUI/FlatCAMGUI.py:4070 flatcamGUI/ObjectUI.py:283
msgid "Pass overlap:"
msgstr "Pass overlap:"

#: flatcamGUI/FlatCAMGUI.py:4072 flatcamGUI/ObjectUI.py:285
#, python-format
msgid ""
"How much (fraction) of the tool width to overlap each tool pass.\n"
"Example:\n"
"A value here of 0.25 means an overlap of 25%% from the tool diameter found "
"above."
msgstr ""
"How much (fraction) of the tool width to overlap each tool pass.\n"
"Example:\n"
"A value here of 0.25 means an overlap of 25%% from the tool diameter found "
"above."

#: flatcamGUI/FlatCAMGUI.py:4080 flatcamGUI/ObjectUI.py:295
msgid "Milling Type:"
msgstr "Milling Type:"

#: flatcamGUI/FlatCAMGUI.py:4082 flatcamGUI/ObjectUI.py:297
msgid ""
"Milling type:\n"
"- climb / best for precision milling and to reduce tool usage\n"
"- conventional / useful when there is no backlash compensation"
msgstr ""
"Milling type:\n"
"- climb / best for precision milling and to reduce tool usage\n"
"- conventional / useful when there is no backlash compensation"

#: flatcamGUI/FlatCAMGUI.py:4092
msgid "Combine Passes"
msgstr "Combine Passes"

#: flatcamGUI/FlatCAMGUI.py:4094 flatcamGUI/ObjectUI.py:309
msgid "Combine all passes into one object"
msgstr "Combine all passes into one object"

#: flatcamGUI/FlatCAMGUI.py:4099
msgid "<b>Clear non-copper:</b>"
msgstr "<b>Clear non-copper:</b>"

#: flatcamGUI/FlatCAMGUI.py:4101 flatcamGUI/FlatCAMGUI.py:5614
#: flatcamGUI/ObjectUI.py:386
msgid ""
"Create a Geometry object with\n"
"toolpaths to cut all non-copper regions."
msgstr ""
"Create a Geometry object with\n"
"toolpaths to cut all non-copper regions."

#: flatcamGUI/FlatCAMGUI.py:4110 flatcamGUI/FlatCAMGUI.py:4136
#: flatcamGUI/ObjectUI.py:430 flatcamGUI/ObjectUI.py:464
msgid "Boundary Margin:"
msgstr "Boundary Margin:"

#: flatcamGUI/FlatCAMGUI.py:4112 flatcamGUI/ObjectUI.py:432
msgid ""
"Specify the edge of the PCB\n"
"by drawing a box around all\n"
"objects with this minimum\n"
"distance."
msgstr ""
"Specify the edge of the PCB\n"
"by drawing a box around all\n"
"objects with this minimum\n"
"distance."

#: flatcamGUI/FlatCAMGUI.py:4122 flatcamGUI/FlatCAMGUI.py:4145
msgid "Rounded corners"
msgstr "Rounded corners"

#: flatcamGUI/FlatCAMGUI.py:4124
msgid ""
"Creates a Geometry objects with polygons\n"
"covering the copper-free areas of the PCB."
msgstr ""
"Creates a Geometry objects with polygons\n"
"covering the copper-free areas of the PCB."

#: flatcamGUI/FlatCAMGUI.py:4130 flatcamGUI/ObjectUI.py:454
msgid "<b>Bounding Box:</b>"
msgstr "<b>Bounding Box:</b>"

#: flatcamGUI/FlatCAMGUI.py:4138 flatcamGUI/ObjectUI.py:466
msgid ""
"Distance of the edges of the box\n"
"to the nearest polygon."
msgstr ""
"Distance of the edges of the box\n"
"to the nearest polygon."

#: flatcamGUI/FlatCAMGUI.py:4147 flatcamGUI/ObjectUI.py:476
msgid ""
"If the bounding box is \n"
"to have rounded corners\n"
"their radius is equal to\n"
"the margin."
msgstr ""
"If the bounding box is \n"
"to have rounded corners\n"
"their radius is equal to\n"
"the margin."

#: flatcamGUI/FlatCAMGUI.py:4161
msgid "Gerber Adv. Options"
msgstr "Gerber Adv. Options"

#: flatcamGUI/FlatCAMGUI.py:4165
msgid "<b>Advanced Param.:</b>"
msgstr "<b>Advanced Param.:</b>"

#: flatcamGUI/FlatCAMGUI.py:4167
msgid ""
"A list of Gerber advanced parameters.\n"
"Those parameters are available only for\n"
"Advanced App. Level."
msgstr ""
"A list of Gerber advanced parameters.\n"
"Those parameters are available only for\n"
"Advanced App. Level."

#: flatcamGUI/FlatCAMGUI.py:4177 flatcamGUI/ObjectUI.py:314
msgid "\"Follow\""
msgstr "\"Follow\""

#: flatcamGUI/FlatCAMGUI.py:4179 flatcamGUI/ObjectUI.py:316
msgid ""
"Generate a 'Follow' geometry.\n"
"This means that it will cut through\n"
"the middle of the trace."
msgstr ""
"Generate a 'Follow' geometry.\n"
"This means that it will cut through\n"
"the middle of the trace."

#: flatcamGUI/FlatCAMGUI.py:4187
msgid "Table Show/Hide"
msgstr "Table Show/Hide"

#: flatcamGUI/FlatCAMGUI.py:4189
msgid ""
"Toggle the display of the Gerber Apertures Table.\n"
"Also, on hide, it will delete all mark shapes\n"
"that are drawn on canvas."
msgstr ""
"Toggle the display of the Gerber Apertures Table.\n"
"Also, on hide, it will delete all mark shapes\n"
"that are drawn on canvas."

#: flatcamGUI/FlatCAMGUI.py:4228
#| msgid "Gerber Editor"
msgid "Gerber Export"
msgstr "Gerber Export"

#: flatcamGUI/FlatCAMGUI.py:4231 flatcamGUI/FlatCAMGUI.py:4902
msgid "<b>Export Options:</b>"
msgstr "<b>Export Options:</b>"

#: flatcamGUI/FlatCAMGUI.py:4233
#| msgid ""
#| "The parameters set here are used in the file exported\n"
#| "when using the File -> Export -> Export Excellon menu entry."
msgid ""
"The parameters set here are used in the file exported\n"
"when using the File -> Export -> Export Gerber menu entry."
msgstr ""
"The parameters set here are used in the file exported\n"
"when using the File -> Export -> Export Gerber menu entry."

#: flatcamGUI/FlatCAMGUI.py:4242 flatcamGUI/FlatCAMGUI.py:4913
msgid "<b>Units</b>:"
msgstr "<b>Units</b>:"

#: flatcamGUI/FlatCAMGUI.py:4244 flatcamGUI/FlatCAMGUI.py:4250
#| msgid "The units used in the Excellon file."
msgid "The units used in the Gerber file."
msgstr "The units used in the Gerber file."

#: flatcamGUI/FlatCAMGUI.py:4256 flatcamGUI/FlatCAMGUI.py:4927
msgid "<b>Int/Decimals:</b>"
msgstr "<b>Int/Decimals:</b>"

#: flatcamGUI/FlatCAMGUI.py:4258
#| msgid "The number of digits for the fractional part of the coordinates."
msgid ""
"The number of digits in the whole part of the number\n"
"and in the fractional part of the number."
msgstr ""
"The number of digits in the whole part of the number\n"
"and in the fractional part of the number."

#: flatcamGUI/FlatCAMGUI.py:4269
#| msgid ""
#| "This numbers signify the number of digits in\n"
#| "the whole part of Excellon coordinates."
msgid ""
"This numbers signify the number of digits in\n"
"the whole part of Gerber coordinates."
msgstr ""
"This numbers signify the number of digits in\n"
"the whole part of Gerber coordinates."

#: flatcamGUI/FlatCAMGUI.py:4283
#| msgid ""
#| "This numbers signify the number of digits in\n"
#| "the decimal part of Excellon coordinates."
msgid ""
"This numbers signify the number of digits in\n"
"the decimal part of Gerber coordinates."
msgstr ""
"This numbers signify the number of digits in\n"
"the decimal part of Gerber coordinates."

#: flatcamGUI/FlatCAMGUI.py:4292 flatcamGUI/FlatCAMGUI.py:4988
msgid "<b>Zeros</b>:"
msgstr "<b>Zeros</b>:"

#: flatcamGUI/FlatCAMGUI.py:4295 flatcamGUI/FlatCAMGUI.py:4305
#| msgid ""
#| "This sets the type of Excellon zeros.\n"
#| "If LZ then Leading Zeros are kept and\n"
#| "Trailing Zeros are removed.\n"
#| "If TZ is checked then Trailing Zeros are kept\n"
#| "and Leading Zeros are removed."
msgid ""
"This sets the type of Gerber zeros.\n"
"If LZ then Leading Zeros are removed and\n"
"Trailing Zeros are kept.\n"
"If TZ is checked then Trailing Zeros are removed\n"
"and Leading Zeros are kept."
msgstr ""
"This sets the type of Gerber zeros.\n"
"If LZ then Leading Zeros are removed and\n"
"Trailing Zeros are kept.\n"
"If TZ is checked then Trailing Zeros are removed\n"
"and Leading Zeros are kept."

#: flatcamGUI/FlatCAMGUI.py:4325 flatcamGUI/FlatCAMGUI.py:5368
#: flatcamGUI/FlatCAMGUI.py:5612 flatcamGUI/FlatCAMGUI.py:5713
#: flatcamGUI/FlatCAMGUI.py:5792 flatcamGUI/FlatCAMGUI.py:5851
#: flatcamGUI/FlatCAMGUI.py:5954 flatcamGUI/FlatCAMGUI.py:6015
#: flatcamGUI/FlatCAMGUI.py:6214 flatcamGUI/FlatCAMGUI.py:6341
msgid "<b>Parameters:</b>"
msgstr "<b>Parameters:</b>"

#: flatcamGUI/FlatCAMGUI.py:4327
msgid "A list of Gerber Editor parameters."
msgstr "A list of Gerber Editor parameters."

#: flatcamGUI/FlatCAMGUI.py:4335 flatcamGUI/FlatCAMGUI.py:5378
#| msgid "Selection:"
msgid "Selection limit:"
msgstr "Selection limit:"

#: flatcamGUI/FlatCAMGUI.py:4337
msgid ""
"Set the number of selected Gerber geometry\n"
"items above which the utility geometry\n"
"becomes just a selection rectangle.\n"
"Increases the performance when moving a\n"
"large number of geometric elements."
msgstr ""
"Set the number of selected Gerber geometry\n"
"items above which the utility geometry\n"
"becomes just a selection rectangle.\n"
"Increases the performance when moving a\n"
"large number of geometric elements."

#: flatcamGUI/FlatCAMGUI.py:4357
msgid "Excellon General"
msgstr "Excellon General"

#: flatcamGUI/FlatCAMGUI.py:4379
msgid "<b>Excellon Format:</b>"
msgstr "<b>Excellon Format:</b>"

#: flatcamGUI/FlatCAMGUI.py:4381
msgid ""
"The NC drill files, usually named Excellon files\n"
"are files that can be found in different formats.\n"
"Here we set the format used when the provided\n"
"coordinates are not using period.\n"
"\n"
"Possible presets:\n"
"\n"
"PROTEUS 3:3 MM LZ\n"
"DipTrace 5:2 MM TZ\n"
"DipTrace 4:3 MM LZ\n"
"\n"
"EAGLE 3:3 MM TZ\n"
"EAGLE 4:3 MM TZ\n"
"EAGLE 2:5 INCH TZ\n"
"EAGLE 3:5 INCH TZ\n"
"\n"
"ALTIUM 2:4 INCH LZ\n"
"Sprint Layout 2:4 INCH LZ\n"
"KiCAD 3:5 INCH TZ"
msgstr ""
"The NC drill files, usually named Excellon files\n"
"are files that can be found in different formats.\n"
"Here we set the format used when the provided\n"
"coordinates are not using period.\n"
"\n"
"Possible presets:\n"
"\n"
"PROTEUS 3:3 MM LZ\n"
"DipTrace 5:2 MM TZ\n"
"DipTrace 4:3 MM LZ\n"
"\n"
"EAGLE 3:3 MM TZ\n"
"EAGLE 4:3 MM TZ\n"
"EAGLE 2:5 INCH TZ\n"
"EAGLE 3:5 INCH TZ\n"
"\n"
"ALTIUM 2:4 INCH LZ\n"
"Sprint Layout 2:4 INCH LZ\n"
"KiCAD 3:5 INCH TZ"

#: flatcamGUI/FlatCAMGUI.py:4406
msgid "INCH:"
msgstr "INCH:"

#: flatcamGUI/FlatCAMGUI.py:4409
msgid "Default values for INCH are 2:4"
msgstr "Default values for INCH are 2:4"

#: flatcamGUI/FlatCAMGUI.py:4417 flatcamGUI/FlatCAMGUI.py:4450
#: flatcamGUI/FlatCAMGUI.py:4942
msgid ""
"This numbers signify the number of digits in\n"
"the whole part of Excellon coordinates."
msgstr ""
"This numbers signify the number of digits in\n"
"the whole part of Excellon coordinates."

#: flatcamGUI/FlatCAMGUI.py:4431 flatcamGUI/FlatCAMGUI.py:4464
#: flatcamGUI/FlatCAMGUI.py:4956
msgid ""
"This numbers signify the number of digits in\n"
"the decimal part of Excellon coordinates."
msgstr ""
"This numbers signify the number of digits in\n"
"the decimal part of Excellon coordinates."

#: flatcamGUI/FlatCAMGUI.py:4439
msgid "METRIC:"
msgstr "METRIC:"

#: flatcamGUI/FlatCAMGUI.py:4442
msgid "Default values for METRIC are 3:3"
msgstr "Default values for METRIC are 3:3"

#: flatcamGUI/FlatCAMGUI.py:4473
msgid "Default <b>Zeros</b>:"
msgstr "Default <b>Zeros</b>:"

#: flatcamGUI/FlatCAMGUI.py:4476 flatcamGUI/FlatCAMGUI.py:4991
msgid ""
"This sets the type of Excellon zeros.\n"
"If LZ then Leading Zeros are kept and\n"
"Trailing Zeros are removed.\n"
"If TZ is checked then Trailing Zeros are kept\n"
"and Leading Zeros are removed."
msgstr ""
"This sets the type of Excellon zeros.\n"
"If LZ then Leading Zeros are kept and\n"
"Trailing Zeros are removed.\n"
"If TZ is checked then Trailing Zeros are kept\n"
"and Leading Zeros are removed."

#: flatcamGUI/FlatCAMGUI.py:4487
msgid ""
"This sets the default type of Excellon zeros.\n"
"If it is not detected in the parsed file the value here\n"
"will be used.If LZ then Leading Zeros are kept and\n"
"Trailing Zeros are removed.\n"
"If TZ is checked then Trailing Zeros are kept\n"
"and Leading Zeros are removed."
msgstr ""
"This sets the default type of Excellon zeros.\n"
"If it is not detected in the parsed file the value here\n"
"will be used.If LZ then Leading Zeros are kept and\n"
"Trailing Zeros are removed.\n"
"If TZ is checked then Trailing Zeros are kept\n"
"and Leading Zeros are removed."

#: flatcamGUI/FlatCAMGUI.py:4501
msgid "Default <b>Units</b>:"
msgstr "Default <b>Units</b>:"

#: flatcamGUI/FlatCAMGUI.py:4504
msgid ""
"This sets the default units of Excellon files.\n"
"If it is not detected in the parsed file the value here\n"
"will be used.Some Excellon files don't have an header\n"
"therefore this parameter will be used."
msgstr ""
"This sets the default units of Excellon files.\n"
"If it is not detected in the parsed file the value here\n"
"will be used.Some Excellon files don't have an header\n"
"therefore this parameter will be used."

#: flatcamGUI/FlatCAMGUI.py:4515
msgid ""
"This sets the units of Excellon files.\n"
"Some Excellon files don't have an header\n"
"therefore this parameter will be used."
msgstr ""
"This sets the units of Excellon files.\n"
"Some Excellon files don't have an header\n"
"therefore this parameter will be used."

#: flatcamGUI/FlatCAMGUI.py:4531
msgid "<b>Excellon Optimization:</b>"
msgstr "<b>Excellon Optimization:</b>"

#: flatcamGUI/FlatCAMGUI.py:4538
msgid "Algorithm:   "
msgstr "Algorithm:   "

#: flatcamGUI/FlatCAMGUI.py:4541 flatcamGUI/FlatCAMGUI.py:4554
msgid ""
"This sets the optimization type for the Excellon drill path.\n"
"If MH is checked then Google OR-Tools algorithm with MetaHeuristic\n"
"Guided Local Path is used. Default search time is 3sec.\n"
"Use set_sys excellon_search_time value Tcl Command to set other values.\n"
"If Basic is checked then Google OR-Tools Basic algorithm is used.\n"
"\n"
"If DISABLED, then FlatCAM works in 32bit mode and it uses \n"
"Travelling Salesman algorithm for path optimization."
msgstr ""
"This sets the optimization type for the Excellon drill path.\n"
"If MH is checked then Google OR-Tools algorithm with MetaHeuristic\n"
"Guided Local Path is used. Default search time is 3sec.\n"
"Use set_sys excellon_search_time value Tcl Command to set other values.\n"
"If Basic is checked then Google OR-Tools Basic algorithm is used.\n"
"\n"
"If DISABLED, then FlatCAM works in 32bit mode and it uses \n"
"Travelling Salesman algorithm for path optimization."

#: flatcamGUI/FlatCAMGUI.py:4566
msgid "Optimization Time:   "
msgstr "Optimization Time:   "

#: flatcamGUI/FlatCAMGUI.py:4569
msgid ""
"When OR-Tools Metaheuristic (MH) is enabled there is a\n"
"maximum threshold for how much time is spent doing the\n"
"path optimization. This max duration is set here.\n"
"In seconds."
msgstr ""
"When OR-Tools Metaheuristic (MH) is enabled there is a\n"
"maximum threshold for how much time is spent doing the\n"
"path optimization. This max duration is set here.\n"
"In seconds."

#: flatcamGUI/FlatCAMGUI.py:4611
msgid "Excellon Options"
msgstr "Excellon Options"

#: flatcamGUI/FlatCAMGUI.py:4614 flatcamGUI/ObjectUI.py:584
msgid "<b>Create CNC Job</b>"
msgstr "<b>Create CNC Job</b>"

#: flatcamGUI/FlatCAMGUI.py:4616
msgid ""
"Parameters used to create a CNC Job object\n"
"for this drill object."
msgstr ""
"Parameters used to create a CNC Job object\n"
"for this drill object."

#: flatcamGUI/FlatCAMGUI.py:4624 flatcamGUI/FlatCAMGUI.py:5094
#: flatcamGUI/FlatCAMGUI.py:6150 flatcamGUI/ObjectUI.py:595
#: flatcamGUI/ObjectUI.py:1062 flatcamTools/ToolCalculators.py:108
msgid "Cut Z:"
msgstr "Cut Z:"

#: flatcamGUI/FlatCAMGUI.py:4626 flatcamGUI/ObjectUI.py:597
msgid ""
"Drill depth (negative)\n"
"below the copper surface."
msgstr ""
"Drill depth (negative)\n"
"below the copper surface."

#: flatcamGUI/FlatCAMGUI.py:4633 flatcamGUI/FlatCAMGUI.py:5127
#: flatcamGUI/ObjectUI.py:605 flatcamGUI/ObjectUI.py:1098
msgid "Travel Z:"
msgstr "Travel Z:"

#: flatcamGUI/FlatCAMGUI.py:4635 flatcamGUI/ObjectUI.py:607
msgid ""
"Tool height when travelling\n"
"across the XY plane."
msgstr ""
"Tool height when travelling\n"
"across the XY plane."

#: flatcamGUI/FlatCAMGUI.py:4643 flatcamGUI/FlatCAMGUI.py:5137
msgid "Tool change:"
msgstr "Tool change:"

#: flatcamGUI/FlatCAMGUI.py:4645 flatcamGUI/FlatCAMGUI.py:5139
#: flatcamGUI/ObjectUI.py:617
msgid ""
"Include tool-change sequence\n"
"in G-Code (Pause for tool change)."
msgstr ""
"Include tool-change sequence\n"
"in G-Code (Pause for tool change)."

#: flatcamGUI/FlatCAMGUI.py:4652 flatcamGUI/FlatCAMGUI.py:5147
msgid "Toolchange Z:"
msgstr "Toolchange Z:"

#: flatcamGUI/FlatCAMGUI.py:4654 flatcamGUI/FlatCAMGUI.py:5149
msgid "Toolchange Z position."
msgstr "Toolchange Z position."

#: flatcamGUI/FlatCAMGUI.py:4660
msgid "Feedrate:"
msgstr "Feedrate:"

#: flatcamGUI/FlatCAMGUI.py:4662
msgid ""
"Tool speed while drilling\n"
"(in units per minute)."
msgstr ""
"Tool speed while drilling\n"
"(in units per minute)."

#: flatcamGUI/FlatCAMGUI.py:4670
msgid "Spindle Speed:"
msgstr "Spindle Speed:"

#: flatcamGUI/FlatCAMGUI.py:4672 flatcamGUI/FlatCAMGUI.py:5179
#: flatcamGUI/ObjectUI.py:684
msgid ""
"Speed of the spindle\n"
"in RPM (optional)"
msgstr ""
"Speed of the spindle\n"
"in RPM (optional)"

#: flatcamGUI/FlatCAMGUI.py:4680 flatcamGUI/FlatCAMGUI.py:5187
#| msgid "Spindle Speed:"
msgid "Spindle dir.:"
msgstr "Spindle dir.:"

#: flatcamGUI/FlatCAMGUI.py:4682 flatcamGUI/FlatCAMGUI.py:5189
#| msgid ""
#| "Direction for circular array.Can be CW = clockwise or CCW = counter "
#| "clockwise."
msgid ""
"This sets the direction that the spindle is rotating.\n"
"It can be either:\n"
"- CW = clockwise or\n"
"- CCW = counter clockwise"
msgstr ""
"This sets the direction that the spindle is rotating.\n"
"It can be either:\n"
"- CW = clockwise or\n"
"- CCW = counter clockwise"

#: flatcamGUI/FlatCAMGUI.py:4694 flatcamGUI/FlatCAMGUI.py:5201
#: flatcamGUI/ObjectUI.py:692 flatcamGUI/ObjectUI.py:1224
msgid "Dwell:"
msgstr "Dwell:"

#: flatcamGUI/FlatCAMGUI.py:4696 flatcamGUI/FlatCAMGUI.py:5203
#: flatcamGUI/ObjectUI.py:694 flatcamGUI/ObjectUI.py:1227
msgid ""
"Pause to allow the spindle to reach its\n"
"speed before cutting."
msgstr ""
"Pause to allow the spindle to reach its\n"
"speed before cutting."

#: flatcamGUI/FlatCAMGUI.py:4699 flatcamGUI/FlatCAMGUI.py:5206
msgid "Duration:"
msgstr "Duration:"

#: flatcamGUI/FlatCAMGUI.py:4701 flatcamGUI/FlatCAMGUI.py:5208
#: flatcamGUI/ObjectUI.py:699 flatcamGUI/ObjectUI.py:1234
msgid "Number of milliseconds for spindle to dwell."
msgstr "Number of milliseconds for spindle to dwell."

#: flatcamGUI/FlatCAMGUI.py:4713 flatcamGUI/FlatCAMGUI.py:5218
#: flatcamGUI/ObjectUI.py:707
msgid "Postprocessor:"
msgstr "Postprocessor:"

#: flatcamGUI/FlatCAMGUI.py:4715
msgid ""
"The postprocessor file that dictates\n"
"gcode output."
msgstr ""
"The postprocessor file that dictates\n"
"gcode output."

#: flatcamGUI/FlatCAMGUI.py:4725
msgid "<b>Gcode:    </b>"
msgstr "<b>Gcode:    </b>"

#: flatcamGUI/FlatCAMGUI.py:4727
msgid ""
"Choose what to use for GCode generation:\n"
"'Drills', 'Slots' or 'Both'.\n"
"When choosing 'Slots' or 'Both', slots will be\n"
"converted to drills."
msgstr ""
"Choose what to use for GCode generation:\n"
"'Drills', 'Slots' or 'Both'.\n"
"When choosing 'Slots' or 'Both', slots will be\n"
"converted to drills."

#: flatcamGUI/FlatCAMGUI.py:4743 flatcamGUI/ObjectUI.py:772
msgid "<b>Mill Holes</b>"
msgstr "<b>Mill Holes</b>"

#: flatcamGUI/FlatCAMGUI.py:4745 flatcamGUI/ObjectUI.py:774
msgid "Create Geometry for milling holes."
msgstr "Create Geometry for milling holes."

#: flatcamGUI/FlatCAMGUI.py:4751
msgid "Drill Tool dia:"
msgstr "Drill Tool dia:"

#: flatcamGUI/FlatCAMGUI.py:4758
msgid "Slot Tool dia:"
msgstr "Slot Tool dia:"

#: flatcamGUI/FlatCAMGUI.py:4760
msgid ""
"Diameter of the cutting tool\n"
"when milling slots."
msgstr ""
"Diameter of the cutting tool\n"
"when milling slots."

#: flatcamGUI/FlatCAMGUI.py:4772
msgid "Defaults"
msgstr "Defaults"

#: flatcamGUI/FlatCAMGUI.py:4785
msgid "Excellon Adv. Options"
msgstr "Excellon Adv. Options"

#: flatcamGUI/FlatCAMGUI.py:4791 flatcamGUI/FlatCAMGUI.py:5241
msgid "<b>Advanced Options:</b>"
msgstr "<b>Advanced Options:</b>"

#: flatcamGUI/FlatCAMGUI.py:4793
msgid ""
"Parameters used to create a CNC Job object\n"
"for this drill object that are shown when App Level is Advanced."
msgstr ""
"Parameters used to create a CNC Job object\n"
"for this drill object that are shown when App Level is Advanced."

#: flatcamGUI/FlatCAMGUI.py:4801
msgid "Offset Z:"
msgstr "Offset Z:"

#: flatcamGUI/FlatCAMGUI.py:4803 flatcamGUI/ObjectUI.py:574
msgid ""
"Some drill bits (the larger ones) need to drill deeper\n"
"to create the desired exit hole diameter due of the tip shape.\n"
"The value here can compensate the Cut Z parameter."
msgstr ""
"Some drill bits (the larger ones) need to drill deeper\n"
"to create the desired exit hole diameter due of the tip shape.\n"
"The value here can compensate the Cut Z parameter."

#: flatcamGUI/FlatCAMGUI.py:4810 flatcamGUI/FlatCAMGUI.py:5252
msgid "Toolchange X,Y:"
msgstr "Toolchange X,Y:"

#: flatcamGUI/FlatCAMGUI.py:4812 flatcamGUI/FlatCAMGUI.py:5254
msgid "Toolchange X,Y position."
msgstr "Toolchange X,Y position."

#: flatcamGUI/FlatCAMGUI.py:4818 flatcamGUI/FlatCAMGUI.py:5261
#: flatcamGUI/ObjectUI.py:634
msgid "Start move Z:"
msgstr "Start move Z:"

#: flatcamGUI/FlatCAMGUI.py:4820
msgid ""
"Height of the tool just after start.\n"
"Delete the value if you don't need this feature."
msgstr ""
"Height of the tool just after start.\n"
"Delete the value if you don't need this feature."

#: flatcamGUI/FlatCAMGUI.py:4827 flatcamGUI/FlatCAMGUI.py:5271
#: flatcamGUI/ObjectUI.py:644 flatcamGUI/ObjectUI.py:1144
msgid "End move Z:"
msgstr "End move Z:"

#: flatcamGUI/FlatCAMGUI.py:4829 flatcamGUI/FlatCAMGUI.py:5273
msgid ""
"Height of the tool after\n"
"the last move at the end of the job."
msgstr ""
"Height of the tool after\n"
"the last move at the end of the job."

#: flatcamGUI/FlatCAMGUI.py:4836 flatcamGUI/FlatCAMGUI.py:5281
#: flatcamGUI/ObjectUI.py:665
msgid "Feedrate Rapids:"
msgstr "Feedrate Rapids:"

#: flatcamGUI/FlatCAMGUI.py:4838 flatcamGUI/ObjectUI.py:667
msgid ""
"Tool speed while drilling\n"
"(in units per minute).\n"
"This is for the rapid move G00.\n"
"It is useful only for Marlin,\n"
"ignore for any other cases."
msgstr ""
"Tool speed while drilling\n"
"(in units per minute).\n"
"This is for the rapid move G00.\n"
"It is useful only for Marlin,\n"
"ignore for any other cases."

#: flatcamGUI/FlatCAMGUI.py:4849 flatcamGUI/FlatCAMGUI.py:5305
#: flatcamGUI/ObjectUI.py:718 flatcamGUI/ObjectUI.py:1256
msgid "Probe Z depth:"
msgstr "Probe Z depth:"

#: flatcamGUI/FlatCAMGUI.py:4851 flatcamGUI/FlatCAMGUI.py:5307
#: flatcamGUI/ObjectUI.py:720 flatcamGUI/ObjectUI.py:1259
msgid ""
"The maximum depth that the probe is allowed\n"
"to probe. Negative value, in current units."
msgstr ""
"The maximum depth that the probe is allowed\n"
"to probe. Negative value, in current units."

#: flatcamGUI/FlatCAMGUI.py:4859 flatcamGUI/FlatCAMGUI.py:5315
#: flatcamGUI/ObjectUI.py:730 flatcamGUI/ObjectUI.py:1270
msgid "Feedrate Probe:"
msgstr "Feedrate Probe:"

#: flatcamGUI/FlatCAMGUI.py:4861 flatcamGUI/FlatCAMGUI.py:5317
#: flatcamGUI/ObjectUI.py:732 flatcamGUI/ObjectUI.py:1273
msgid "The feedrate used while the probe is probing."
msgstr "The feedrate used while the probe is probing."

#: flatcamGUI/FlatCAMGUI.py:4867 flatcamGUI/FlatCAMGUI.py:5324
msgid "Fast Plunge:"
msgstr "Fast Plunge:"

#: flatcamGUI/FlatCAMGUI.py:4869 flatcamGUI/FlatCAMGUI.py:5326
msgid ""
"By checking this, the vertical move from\n"
"Z_Toolchange to Z_move is done with G0,\n"
"meaning the fastest speed available.\n"
"WARNING: the move is done at Toolchange X,Y coords."
msgstr ""
"By checking this, the vertical move from\n"
"Z_Toolchange to Z_move is done with G0,\n"
"meaning the fastest speed available.\n"
"WARNING: the move is done at Toolchange X,Y coords."

#: flatcamGUI/FlatCAMGUI.py:4878
msgid "Fast Retract:"
msgstr "Fast Retract:"

#: flatcamGUI/FlatCAMGUI.py:4880
msgid ""
"Exit hole strategy.\n"
" - When uncheked, while exiting the drilled hole the drill bit\n"
"will travel slow, with set feedrate (G1), up to zero depth and then\n"
"travel as fast as possible (G0) to the Z Move (travel height).\n"
" - When checked the travel from Z cut (cut depth) to Z_move\n"
"(travel height) is done as fast as possible (G0) in one move."
msgstr ""
"Exit hole strategy.\n"
" - When uncheked, while exiting the drilled hole the drill bit\n"
"will travel slow, with set feedrate (G1), up to zero depth and then\n"
"travel as fast as possible (G0) to the Z Move (travel height).\n"
" - When checked the travel from Z cut (cut depth) to Z_move\n"
"(travel height) is done as fast as possible (G0) in one move."

#: flatcamGUI/FlatCAMGUI.py:4899
msgid "Excellon Export"
msgstr "Excellon Export"

#: flatcamGUI/FlatCAMGUI.py:4904
msgid ""
"The parameters set here are used in the file exported\n"
"when using the File -> Export -> Export Excellon menu entry."
msgstr ""
"The parameters set here are used in the file exported\n"
"when using the File -> Export -> Export Excellon menu entry."

#: flatcamGUI/FlatCAMGUI.py:4915 flatcamGUI/FlatCAMGUI.py:4921
msgid "The units used in the Excellon file."
msgstr "The units used in the Excellon file."

#: flatcamGUI/FlatCAMGUI.py:4929
msgid ""
"The NC drill files, usually named Excellon files\n"
"are files that can be found in different formats.\n"
"Here we set the format used when the provided\n"
"coordinates are not using period."
msgstr ""
"The NC drill files, usually named Excellon files\n"
"are files that can be found in different formats.\n"
"Here we set the format used when the provided\n"
"coordinates are not using period."

#: flatcamGUI/FlatCAMGUI.py:4965
msgid "<b>Format:</b>"
msgstr "<b>Format:</b>"

#: flatcamGUI/FlatCAMGUI.py:4967 flatcamGUI/FlatCAMGUI.py:4977
msgid ""
"Select the kind of coordinates format used.\n"
"Coordinates can be saved with decimal point or without.\n"
"When there is no decimal point, it is required to specify\n"
"the number of digits for integer part and the number of decimals.\n"
"Also it will have to be specified if LZ = leading zeros are kept\n"
"or TZ = trailing zeros are kept."
msgstr ""
"Select the kind of coordinates format used.\n"
"Coordinates can be saved with decimal point or without.\n"
"When there is no decimal point, it is required to specify\n"
"the number of digits for integer part and the number of decimals.\n"
"Also it will have to be specified if LZ = leading zeros are kept\n"
"or TZ = trailing zeros are kept."

#: flatcamGUI/FlatCAMGUI.py:5001
msgid ""
"This sets the default type of Excellon zeros.\n"
"If LZ then Leading Zeros are kept and\n"
"Trailing Zeros are removed.\n"
"If TZ is checked then Trailing Zeros are kept\n"
"and Leading Zeros are removed."
msgstr ""
"This sets the default type of Excellon zeros.\n"
"If LZ then Leading Zeros are kept and\n"
"Trailing Zeros are removed.\n"
"If TZ is checked then Trailing Zeros are kept\n"
"and Leading Zeros are removed."

#: flatcamGUI/FlatCAMGUI.py:5027
msgid "Geometry General"
msgstr "Geometry General"

#: flatcamGUI/FlatCAMGUI.py:5045
msgid ""
"The number of circle steps for <b>Geometry</b> \n"
"circle and arc shapes linear approximation."
msgstr ""
"The number of circle steps for <b>Geometry</b> \n"
"circle and arc shapes linear approximation."

#: flatcamGUI/FlatCAMGUI.py:5053
msgid "<b>Tools</b>"
msgstr "<b>Tools</b>"

#: flatcamGUI/FlatCAMGUI.py:5060
msgid "Tool dia:                   "
msgstr "Tool dia:                   "

#: flatcamGUI/FlatCAMGUI.py:5062
msgid ""
"The diameter of the cutting\n"
"tool.."
msgstr ""
"The diameter of the cutting\n"
"tool.."

#: flatcamGUI/FlatCAMGUI.py:5077
msgid "Geometry Options"
msgstr "Geometry Options"

#: flatcamGUI/FlatCAMGUI.py:5082
msgid "<b>Create CNC Job:</b>"
msgstr "<b>Create CNC Job:</b>"

#: flatcamGUI/FlatCAMGUI.py:5084
msgid ""
"Create a CNC Job object\n"
"tracing the contours of this\n"
"Geometry object."
msgstr ""
"Create a CNC Job object\n"
"tracing the contours of this\n"
"Geometry object."

#: flatcamGUI/FlatCAMGUI.py:5096 flatcamGUI/ObjectUI.py:1065
msgid ""
"Cutting depth (negative)\n"
"below the copper surface."
msgstr ""
"Cutting depth (negative)\n"
"below the copper surface."

#: flatcamGUI/FlatCAMGUI.py:5104
msgid "Multidepth"
msgstr "Multidepth"

#: flatcamGUI/FlatCAMGUI.py:5106
msgid "Multidepth usage: True or False."
msgstr "Multidepth usage: True or False."

#: flatcamGUI/FlatCAMGUI.py:5111
msgid "Depth/Pass:"
msgstr "Depth/Pass:"

#: flatcamGUI/FlatCAMGUI.py:5113
msgid ""
"The depth to cut on each pass,\n"
"when multidepth is enabled.\n"
"It has positive value although\n"
"it is a fraction from the depth\n"
"which has negative value."
msgstr ""
"The depth to cut on each pass,\n"
"when multidepth is enabled.\n"
"It has positive value although\n"
"it is a fraction from the depth\n"
"which has negative value."

#: flatcamGUI/FlatCAMGUI.py:5129 flatcamGUI/ObjectUI.py:1101
msgid ""
"Height of the tool when\n"
"moving without cutting."
msgstr ""
"Height of the tool when\n"
"moving without cutting."

#: flatcamGUI/FlatCAMGUI.py:5156 flatcamGUI/ObjectUI.py:1156
msgid "Feed Rate X-Y:"
msgstr "Feed Rate X-Y:"

#: flatcamGUI/FlatCAMGUI.py:5158 flatcamGUI/ObjectUI.py:1159
msgid ""
"Cutting speed in the XY\n"
"plane in units per minute"
msgstr ""
"Cutting speed in the XY\n"
"plane in units per minute"

#: flatcamGUI/FlatCAMGUI.py:5166
msgid "Feed Rate Z:"
msgstr "Feed Rate Z:"

#: flatcamGUI/FlatCAMGUI.py:5168
msgid ""
"Cutting speed in the XY\n"
"plane in units per minute.\n"
"It is called also Plunge."
msgstr ""
"Cutting speed in the XY\n"
"plane in units per minute.\n"
"It is called also Plunge."

#: flatcamGUI/FlatCAMGUI.py:5177 flatcamGUI/ObjectUI.py:682
#: flatcamGUI/ObjectUI.py:1211
msgid "Spindle speed:"
msgstr "Spindle speed:"

#: flatcamGUI/FlatCAMGUI.py:5220
msgid ""
"The postprocessor file that dictates\n"
"Machine Code output."
msgstr ""
"The postprocessor file that dictates\n"
"Machine Code output."

#: flatcamGUI/FlatCAMGUI.py:5236
msgid "Geometry Adv. Options"
msgstr "Geometry Adv. Options"

#: flatcamGUI/FlatCAMGUI.py:5243
msgid ""
"Parameters to create a CNC Job object\n"
"tracing the contours of a Geometry object."
msgstr ""
"Parameters to create a CNC Job object\n"
"tracing the contours of a Geometry object."

#: flatcamGUI/FlatCAMGUI.py:5263
msgid ""
"Height of the tool just after starting the work.\n"
"Delete the value if you don't need this feature."
msgstr ""
"Height of the tool just after starting the work.\n"
"Delete the value if you don't need this feature."

#: flatcamGUI/FlatCAMGUI.py:5283
msgid ""
"Cutting speed in the XY plane\n"
"(in units per minute).\n"
"This is for the rapid move G00.\n"
"It is useful only for Marlin,\n"
"ignore for any other cases."
msgstr ""
"Cutting speed in the XY plane\n"
"(in units per minute).\n"
"This is for the rapid move G00.\n"
"It is useful only for Marlin,\n"
"ignore for any other cases."

#: flatcamGUI/FlatCAMGUI.py:5295
msgid "Re-cut 1st pt."
msgstr "Re-cut 1st pt."

#: flatcamGUI/FlatCAMGUI.py:5297 flatcamGUI/ObjectUI.py:1202
msgid ""
"In order to remove possible\n"
"copper leftovers where first cut\n"
"meet with last cut, we generate an\n"
"extended cut over the first cut section."
msgstr ""
"In order to remove possible\n"
"copper leftovers where first cut\n"
"meet with last cut, we generate an\n"
"extended cut over the first cut section."

#: flatcamGUI/FlatCAMGUI.py:5336
msgid "Seg. X size:"
msgstr "Seg. X size:"

#: flatcamGUI/FlatCAMGUI.py:5338
msgid ""
"The size of the trace segment on the X axis.\n"
"Useful for auto-leveling.\n"
"A value of 0 means no segmentation on the X axis."
msgstr ""
"The size of the trace segment on the X axis.\n"
"Useful for auto-leveling.\n"
"A value of 0 means no segmentation on the X axis."

#: flatcamGUI/FlatCAMGUI.py:5347
msgid "Seg. Y size:"
msgstr "Seg. Y size:"

#: flatcamGUI/FlatCAMGUI.py:5349
msgid ""
"The size of the trace segment on the Y axis.\n"
"Useful for auto-leveling.\n"
"A value of 0 means no segmentation on the Y axis."
msgstr ""
"The size of the trace segment on the Y axis.\n"
"Useful for auto-leveling.\n"
"A value of 0 means no segmentation on the Y axis."

#: flatcamGUI/FlatCAMGUI.py:5365
#| msgid "Geo Editor"
msgid "Geometry Editor"
msgstr "Geometry Editor"

#: flatcamGUI/FlatCAMGUI.py:5370
#| msgid "Geometry Editor Toolbar"
msgid "A list of Geometry Editor parameters."
msgstr "A list of Geometry Editor parameters."

#: flatcamGUI/FlatCAMGUI.py:5380
msgid ""
"Set the number of selected geometry\n"
"items above which the utility geometry\n"
"becomes just a selection rectangle.\n"
"Increases the performance when moving a\n"
"large number of geometric elements."
msgstr ""
"Set the number of selected geometry\n"
"items above which the utility geometry\n"
"becomes just a selection rectangle.\n"
"Increases the performance when moving a\n"
"large number of geometric elements."

#: flatcamGUI/FlatCAMGUI.py:5399
msgid "CNC Job General"
msgstr "CNC Job General"

#: flatcamGUI/FlatCAMGUI.py:5412 flatcamGUI/ObjectUI.py:544
#: flatcamGUI/ObjectUI.py:877 flatcamGUI/ObjectUI.py:1434
msgid "Plot Object"
msgstr "Plot Object"

#: flatcamGUI/FlatCAMGUI.py:5419
msgid "Plot kind:"
msgstr "Plot kind:"

#: flatcamGUI/FlatCAMGUI.py:5421 flatcamGUI/ObjectUI.py:1356
msgid ""
"This selects the kind of geometries on the canvas to plot.\n"
"Those can be either of type 'Travel' which means the moves\n"
"above the work piece or it can be of type 'Cut',\n"
"which means the moves that cut into the material."
msgstr ""
"This selects the kind of geometries on the canvas to plot.\n"
"Those can be either of type 'Travel' which means the moves\n"
"above the work piece or it can be of type 'Cut',\n"
"which means the moves that cut into the material."

#: flatcamGUI/FlatCAMGUI.py:5440
msgid ""
"The number of circle steps for <b>GCode</b> \n"
"circle and arc shapes linear approximation."
msgstr ""
"The number of circle steps for <b>GCode</b> \n"
"circle and arc shapes linear approximation."

#: flatcamGUI/FlatCAMGUI.py:5450
msgid ""
"Diameter of the tool to be\n"
"rendered in the plot."
msgstr ""
"Diameter of the tool to be\n"
"rendered in the plot."

#: flatcamGUI/FlatCAMGUI.py:5458
msgid "Coords dec.:"
msgstr "Coords dec.:"

#: flatcamGUI/FlatCAMGUI.py:5460
msgid ""
"The number of decimals to be used for \n"
"the X, Y, Z coordinates in CNC code (GCODE, etc.)"
msgstr ""
"The number of decimals to be used for \n"
"the X, Y, Z coordinates in CNC code (GCODE, etc.)"

#: flatcamGUI/FlatCAMGUI.py:5468
msgid "Feedrate dec.:"
msgstr "Feedrate dec.:"

#: flatcamGUI/FlatCAMGUI.py:5470
msgid ""
"The number of decimals to be used for \n"
"the Feedrate parameter in CNC code (GCODE, etc.)"
msgstr ""
"The number of decimals to be used for \n"
"the Feedrate parameter in CNC code (GCODE, etc.)"

#: flatcamGUI/FlatCAMGUI.py:5485
msgid "CNC Job Options"
msgstr "CNC Job Options"

#: flatcamGUI/FlatCAMGUI.py:5488 flatcamGUI/FlatCAMGUI.py:5529
msgid "<b>Export G-Code:</b>"
msgstr "<b>Export G-Code:</b>"

#: flatcamGUI/FlatCAMGUI.py:5490 flatcamGUI/FlatCAMGUI.py:5531
#: flatcamGUI/ObjectUI.py:1470
msgid ""
"Export and save G-Code to\n"
"make this object to a file."
msgstr ""
"Export and save G-Code to\n"
"make this object to a file."

#: flatcamGUI/FlatCAMGUI.py:5496
msgid "Prepend to G-Code:"
msgstr "Prepend to G-Code:"

#: flatcamGUI/FlatCAMGUI.py:5498
msgid ""
"Type here any G-Code commands you would\n"
"like to add at the beginning of the G-Code file."
msgstr ""
"Type here any G-Code commands you would\n"
"like to add at the beginning of the G-Code file."

#: flatcamGUI/FlatCAMGUI.py:5507
msgid "Append to G-Code:"
msgstr "Append to G-Code:"

#: flatcamGUI/FlatCAMGUI.py:5509 flatcamGUI/ObjectUI.py:1492
msgid ""
"Type here any G-Code commands you would\n"
"like to append to the generated file.\n"
"I.e.: M2 (End of program)"
msgstr ""
"Type here any G-Code commands you would\n"
"like to append to the generated file.\n"
"I.e.: M2 (End of program)"

#: flatcamGUI/FlatCAMGUI.py:5526
msgid "CNC Job Adv. Options"
msgstr "CNC Job Adv. Options"

#: flatcamGUI/FlatCAMGUI.py:5537 flatcamGUI/ObjectUI.py:1510
msgid "Toolchange G-Code:"
msgstr "Toolchange G-Code:"

#: flatcamGUI/FlatCAMGUI.py:5539
msgid ""
"Type here any G-Code commands you would\n"
"like to be executed when Toolchange event is encountered.\n"
"This will constitute a Custom Toolchange GCode,\n"
"or a Toolchange Macro."
msgstr ""
"Type here any G-Code commands you would\n"
"like to be executed when Toolchange event is encountered.\n"
"This will constitute a Custom Toolchange GCode,\n"
"or a Toolchange Macro."

#: flatcamGUI/FlatCAMGUI.py:5553 flatcamGUI/ObjectUI.py:1532
msgid "Use Toolchange Macro"
msgstr "Use Toolchange Macro"

#: flatcamGUI/FlatCAMGUI.py:5555 flatcamGUI/ObjectUI.py:1535
msgid ""
"Check this box if you want to use\n"
"a Custom Toolchange GCode (macro)."
msgstr ""
"Check this box if you want to use\n"
"a Custom Toolchange GCode (macro)."

#: flatcamGUI/FlatCAMGUI.py:5567 flatcamGUI/ObjectUI.py:1544
msgid ""
"A list of the FlatCAM variables that can be used\n"
"in the Toolchange event.\n"
"They have to be surrounded by the '%' symbol"
msgstr ""
"A list of the FlatCAM variables that can be used\n"
"in the Toolchange event.\n"
"They have to be surrounded by the '%' symbol"

#: flatcamGUI/FlatCAMGUI.py:5574 flatcamGUI/ObjectUI.py:1551
msgid "Parameters"
msgstr "Parameters"

#: flatcamGUI/FlatCAMGUI.py:5577 flatcamGUI/ObjectUI.py:1554
msgid "FlatCAM CNC parameters"
msgstr "FlatCAM CNC parameters"

#: flatcamGUI/FlatCAMGUI.py:5578 flatcamGUI/ObjectUI.py:1555
msgid "tool = tool number"
msgstr "tool = tool number"

#: flatcamGUI/FlatCAMGUI.py:5579 flatcamGUI/ObjectUI.py:1556
msgid "tooldia = tool diameter"
msgstr "tooldia = tool diameter"

#: flatcamGUI/FlatCAMGUI.py:5580 flatcamGUI/ObjectUI.py:1557
msgid "t_drills = for Excellon, total number of drills"
msgstr "t_drills = for Excellon, total number of drills"

#: flatcamGUI/FlatCAMGUI.py:5581 flatcamGUI/ObjectUI.py:1558
msgid "x_toolchange = X coord for Toolchange"
msgstr "x_toolchange = X coord for Toolchange"

#: flatcamGUI/FlatCAMGUI.py:5582 flatcamGUI/ObjectUI.py:1559
msgid "y_toolchange = Y coord for Toolchange"
msgstr "y_toolchange = Y coord for Toolchange"

#: flatcamGUI/FlatCAMGUI.py:5583 flatcamGUI/ObjectUI.py:1560
msgid "z_toolchange = Z coord for Toolchange"
msgstr "z_toolchange = Z coord for Toolchange"

#: flatcamGUI/FlatCAMGUI.py:5584
msgid "z_cut = Z depth for the cut"
msgstr "z_cut = Z depth for the cut"

#: flatcamGUI/FlatCAMGUI.py:5585
msgid "z_move = Z height for travel"
msgstr "z_move = Z height for travel"

#: flatcamGUI/FlatCAMGUI.py:5586 flatcamGUI/ObjectUI.py:1563
msgid "z_depthpercut = the step value for multidepth cut"
msgstr "z_depthpercut = the step value for multidepth cut"

#: flatcamGUI/FlatCAMGUI.py:5587 flatcamGUI/ObjectUI.py:1564
msgid "spindlesspeed = the value for the spindle speed"
msgstr "spindlesspeed = the value for the spindle speed"

#: flatcamGUI/FlatCAMGUI.py:5588 flatcamGUI/ObjectUI.py:1565
msgid "dwelltime = time to dwell to allow the spindle to reach it's set RPM"
msgstr "dwelltime = time to dwell to allow the spindle to reach it's set RPM"

#: flatcamGUI/FlatCAMGUI.py:5609
msgid "NCC Tool Options"
msgstr "NCC Tool Options"

#: flatcamGUI/FlatCAMGUI.py:5622 flatcamGUI/FlatCAMGUI.py:6352
msgid "Tools dia:"
msgstr "Tools dia:"

#: flatcamGUI/FlatCAMGUI.py:5624
msgid "Diameters of the cutting tools, separated by ','"
msgstr "Diameters of the cutting tools, separated by ','"

#: flatcamGUI/FlatCAMGUI.py:5632 flatcamTools/ToolNonCopperClear.py:167
#, python-format
msgid ""
"How much (fraction) of the tool width to overlap each tool pass.\n"
"Example:\n"
"A value here of 0.25 means 25% from the tool diameter found above.\n"
"\n"
"Adjust the value starting with lower values\n"
"and increasing it if areas that should be cleared are still \n"
"not cleared.\n"
"Lower values = faster processing, faster execution on PCB.\n"
"Higher values = slow processing and slow execution on CNC\n"
"due of too many paths."
msgstr ""
"How much (fraction) of the tool width to overlap each tool pass.\n"
"Example:\n"
"A value here of 0.25 means 25% from the tool diameter found above.\n"
"\n"
"Adjust the value starting with lower values\n"
"and increasing it if areas that should be cleared are still \n"
"not cleared.\n"
"Lower values = faster processing, faster execution on PCB.\n"
"Higher values = slow processing and slow execution on CNC\n"
"due of too many paths."

#: flatcamGUI/FlatCAMGUI.py:5648 flatcamTools/ToolNonCopperClear.py:183
msgid "Bounding box margin."
msgstr "Bounding box margin."

#: flatcamGUI/FlatCAMGUI.py:5657 flatcamTools/ToolNonCopperClear.py:192
#: flatcamTools/ToolPaint.py:190
msgid ""
"Algorithm for non-copper clearing:<BR><B>Standard</B>: Fixed step inwards."
"<BR><B>Seed-based</B>: Outwards from seed.<BR><B>Line-based</B>: Parallel "
"lines."
msgstr ""
"Algorithm for non-copper clearing:<BR><B>Standard</B>: Fixed step inwards."
"<BR><B>Seed-based</B>: Outwards from seed.<BR><B>Line-based</B>: Parallel "
"lines."

#: flatcamGUI/FlatCAMGUI.py:5689 flatcamTools/ToolNonCopperClear.py:224
#: flatcamTools/ToolPaint.py:222
msgid "Rest M.:"
msgstr "Rest M.:"

#: flatcamGUI/FlatCAMGUI.py:5691
msgid ""
"If checked, use 'rest machining'.\n"
"Basically it will clear copper outside PCB features,\n"
"using the biggest tool and continue with the next tools,\n"
"from bigger to smaller, to clear areas of copper that\n"
"could not be cleared by previous tool.\n"
"If not checked, use the standard algorithm."
msgstr ""
"If checked, use 'rest machining'.\n"
"Basically it will clear copper outside PCB features,\n"
"using the biggest tool and continue with the next tools,\n"
"from bigger to smaller, to clear areas of copper that\n"
"could not be cleared by previous tool.\n"
"If not checked, use the standard algorithm."

#: flatcamGUI/FlatCAMGUI.py:5710
msgid "Cutout Tool Options"
msgstr "Cutout Tool Options"

#: flatcamGUI/FlatCAMGUI.py:5715 flatcamGUI/ObjectUI.py:402
msgid ""
"Create toolpaths to cut around\n"
"the PCB and separate it from\n"
"the original board."
msgstr ""
"Create toolpaths to cut around\n"
"the PCB and separate it from\n"
"the original board."

#: flatcamGUI/FlatCAMGUI.py:5734
msgid ""
"Distance from objects at which\n"
"to draw the cutout."
msgstr ""
"Distance from objects at which\n"
"to draw the cutout."

#: flatcamGUI/FlatCAMGUI.py:5741 flatcamTools/ToolCutOut.py:96
msgid "Gap size:"
msgstr "Gap size:"

#: flatcamGUI/FlatCAMGUI.py:5743
msgid ""
"Size of the gaps in the toolpath\n"
"that will remain to hold the\n"
"board in place."
msgstr ""
"Size of the gaps in the toolpath\n"
"that will remain to hold the\n"
"board in place."

#: flatcamGUI/FlatCAMGUI.py:5751 flatcamTools/ToolCutOut.py:134
msgid "Gaps:"
msgstr "Gaps:"

#: flatcamGUI/FlatCAMGUI.py:5753
msgid ""
"Number of bridge gaps used for the cutout.\n"
"There can be maximum 8 bridges/gaps.\n"
"The choices are:\n"
"- lr    - left + right\n"
"- tb    - top + bottom\n"
"- 4     - left + right +top + bottom\n"
"- 2lr   - 2*left + 2*right\n"
"- 2tb  - 2*top + 2*bottom\n"
"- 8     - 2*left + 2*right +2*top + 2*bottom"
msgstr ""
"Number of bridge gaps used for the cutout.\n"
"There can be maximum 8 bridges/gaps.\n"
"The choices are:\n"
"- lr    - left + right\n"
"- tb    - top + bottom\n"
"- 4     - left + right +top + bottom\n"
"- 2lr   - 2*left + 2*right\n"
"- 2tb  - 2*top + 2*bottom\n"
"- 8     - 2*left + 2*right +2*top + 2*bottom"

#: flatcamGUI/FlatCAMGUI.py:5774 flatcamTools/ToolCutOut.py:115
msgid "Convex Sh.:"
msgstr "Convex Sh.:"

#: flatcamGUI/FlatCAMGUI.py:5776
msgid "Create a convex shape surrounding the entire PCB."
msgstr "Create a convex shape surrounding the entire PCB."

#: flatcamGUI/FlatCAMGUI.py:5789
msgid "2Sided Tool Options"
msgstr "2Sided Tool Options"

#: flatcamGUI/FlatCAMGUI.py:5794
msgid ""
"A tool to help in creating a double sided\n"
"PCB using alignment holes."
msgstr ""
"A tool to help in creating a double sided\n"
"PCB using alignment holes."

#: flatcamGUI/FlatCAMGUI.py:5804 flatcamTools/ToolDblSided.py:235
msgid "Drill diam.:"
msgstr "Drill diam.:"

#: flatcamGUI/FlatCAMGUI.py:5806 flatcamTools/ToolDblSided.py:226
#: flatcamTools/ToolDblSided.py:237
msgid "Diameter of the drill for the alignment holes."
msgstr "Diameter of the drill for the alignment holes."

#: flatcamGUI/FlatCAMGUI.py:5815 flatcamTools/ToolDblSided.py:120
msgid "Mirror Axis:"
msgstr "Mirror Axis:"

#: flatcamGUI/FlatCAMGUI.py:5817 flatcamTools/ToolDblSided.py:122
msgid "Mirror vertically (X) or horizontally (Y)."
msgstr "Mirror vertically (X) or horizontally (Y)."

#: flatcamGUI/FlatCAMGUI.py:5828 flatcamTools/ToolDblSided.py:133
msgid "Axis Ref:"
msgstr "Axis Ref:"

#: flatcamGUI/FlatCAMGUI.py:5830
msgid ""
"The axis should pass through a <b>point</b> or cut\n"
" a specified <b>box</b> (in a Geometry object) in \n"
"the middle."
msgstr ""
"The axis should pass through a <b>point</b> or cut\n"
" a specified <b>box</b> (in a Geometry object) in \n"
"the middle."

#: flatcamGUI/FlatCAMGUI.py:5846
msgid "Paint Tool Options"
msgstr "Paint Tool Options"

#: flatcamGUI/FlatCAMGUI.py:5853 flatcamGUI/ObjectUI.py:1305
msgid ""
"Creates tool paths to cover the\n"
"whole area of a polygon (remove\n"
"all copper). You will be asked\n"
"to click on the desired polygon."
msgstr ""
"Creates tool paths to cover the\n"
"whole area of a polygon (remove\n"
"all copper). You will be asked\n"
"to click on the desired polygon."

#: flatcamGUI/FlatCAMGUI.py:5877
msgid ""
"How much (fraction) of the tool\n"
"width to overlap each tool pass."
msgstr ""
"How much (fraction) of the tool\n"
"width to overlap each tool pass."

#: flatcamGUI/FlatCAMGUI.py:5931 flatcamTools/ToolPaint.py:237
msgid "Selection:"
msgstr "Selection:"

#: flatcamGUI/FlatCAMGUI.py:5933
msgid "How to select the polygons to paint."
msgstr "How to select the polygons to paint."

#: flatcamGUI/FlatCAMGUI.py:5951
msgid "Film Tool Options"
msgstr "Film Tool Options"

#: flatcamGUI/FlatCAMGUI.py:5956
msgid ""
"Create a PCB film from a Gerber or Geometry\n"
"FlatCAM object.\n"
"The file is saved in SVG format."
msgstr ""
"Create a PCB film from a Gerber or Geometry\n"
"FlatCAM object.\n"
"The file is saved in SVG format."

#: flatcamGUI/FlatCAMGUI.py:5967 flatcamTools/ToolFilm.py:116
msgid "Film Type:"
msgstr "Film Type:"

#: flatcamGUI/FlatCAMGUI.py:5969 flatcamTools/ToolFilm.py:118
msgid ""
"Generate a Positive black film or a Negative film.\n"
"Positive means that it will print the features\n"
"with black on a white canvas.\n"
"Negative means that it will print the features\n"
"with white on a black canvas.\n"
"The Film format is SVG."
msgstr ""
"Generate a Positive black film or a Negative film.\n"
"Positive means that it will print the features\n"
"with black on a white canvas.\n"
"Negative means that it will print the features\n"
"with white on a black canvas.\n"
"The Film format is SVG."

#: flatcamGUI/FlatCAMGUI.py:5980 flatcamTools/ToolFilm.py:130
msgid "Border:"
msgstr "Border:"

#: flatcamGUI/FlatCAMGUI.py:5982 flatcamTools/ToolFilm.py:132
msgid ""
"Specify a border around the object.\n"
"Only for negative film.\n"
"It helps if we use as a Box Object the same \n"
"object as in Film Object. It will create a thick\n"
"black bar around the actual print allowing for a\n"
"better delimitation of the outline features which are of\n"
"white color like the rest and which may confound with the\n"
"surroundings if not for this border."
msgstr ""
"Specify a border around the object.\n"
"Only for negative film.\n"
"It helps if we use as a Box Object the same \n"
"object as in Film Object. It will create a thick\n"
"black bar around the actual print allowing for a\n"
"better delimitation of the outline features which are of\n"
"white color like the rest and which may confound with the\n"
"surroundings if not for this border."

#: flatcamGUI/FlatCAMGUI.py:5995 flatcamTools/ToolFilm.py:144
msgid "Scale Stroke:"
msgstr "Scale Stroke:"

#: flatcamGUI/FlatCAMGUI.py:5997 flatcamTools/ToolFilm.py:146
msgid ""
"Scale the line stroke thickness of each feature in the SVG file.\n"
"It means that the line that envelope each SVG feature will be thicker or "
"thinner,\n"
"therefore the fine features may be more affected by this parameter."
msgstr ""
"Scale the line stroke thickness of each feature in the SVG file.\n"
"It means that the line that envelope each SVG feature will be thicker or "
"thinner,\n"
"therefore the fine features may be more affected by this parameter."

#: flatcamGUI/FlatCAMGUI.py:6012
msgid "Panelize Tool Options"
msgstr "Panelize Tool Options"

#: flatcamGUI/FlatCAMGUI.py:6017
msgid ""
"Create an object that contains an array of (x, y) elements,\n"
"each element is a copy of the source object spaced\n"
"at a X distance, Y distance of each other."
msgstr ""
"Create an object that contains an array of (x, y) elements,\n"
"each element is a copy of the source object spaced\n"
"at a X distance, Y distance of each other."

#: flatcamGUI/FlatCAMGUI.py:6028 flatcamTools/ToolPanelize.py:147
msgid "Spacing cols:"
msgstr "Spacing cols:"

#: flatcamGUI/FlatCAMGUI.py:6030 flatcamTools/ToolPanelize.py:149
msgid ""
"Spacing between columns of the desired panel.\n"
"In current units."
msgstr ""
"Spacing between columns of the desired panel.\n"
"In current units."

#: flatcamGUI/FlatCAMGUI.py:6038 flatcamTools/ToolPanelize.py:156
msgid "Spacing rows:"
msgstr "Spacing rows:"

#: flatcamGUI/FlatCAMGUI.py:6040 flatcamTools/ToolPanelize.py:158
msgid ""
"Spacing between rows of the desired panel.\n"
"In current units."
msgstr ""
"Spacing between rows of the desired panel.\n"
"In current units."

#: flatcamGUI/FlatCAMGUI.py:6048 flatcamTools/ToolPanelize.py:165
msgid "Columns:"
msgstr "Columns:"

#: flatcamGUI/FlatCAMGUI.py:6050 flatcamTools/ToolPanelize.py:167
msgid "Number of columns of the desired panel"
msgstr "Number of columns of the desired panel"

#: flatcamGUI/FlatCAMGUI.py:6057 flatcamTools/ToolPanelize.py:173
msgid "Rows:"
msgstr "Rows:"

#: flatcamGUI/FlatCAMGUI.py:6059 flatcamTools/ToolPanelize.py:175
msgid "Number of rows of the desired panel"
msgstr "Number of rows of the desired panel"

#: flatcamGUI/FlatCAMGUI.py:6067
msgid "Panel Type:"
msgstr "Panel Type:"

#: flatcamGUI/FlatCAMGUI.py:6069
msgid ""
"Choose the type of object for the panel object:\n"
"- Gerber\n"
"- Geometry"
msgstr ""
"Choose the type of object for the panel object:\n"
"- Gerber\n"
"- Geometry"

#: flatcamGUI/FlatCAMGUI.py:6078
msgid "Constrain within:"
msgstr "Constrain within:"

#: flatcamGUI/FlatCAMGUI.py:6080 flatcamTools/ToolPanelize.py:195
msgid ""
"Area define by DX and DY within to constrain the panel.\n"
"DX and DY values are in current units.\n"
"Regardless of how many columns and rows are desired,\n"
"the final panel will have as many columns and rows as\n"
"they fit completely within selected area."
msgstr ""
"Area define by DX and DY within to constrain the panel.\n"
"DX and DY values are in current units.\n"
"Regardless of how many columns and rows are desired,\n"
"the final panel will have as many columns and rows as\n"
"they fit completely within selected area."

#: flatcamGUI/FlatCAMGUI.py:6089 flatcamTools/ToolPanelize.py:204
msgid "Width (DX):"
msgstr "Width (DX):"

#: flatcamGUI/FlatCAMGUI.py:6091 flatcamTools/ToolPanelize.py:206
msgid ""
"The width (DX) within which the panel must fit.\n"
"In current units."
msgstr ""
"The width (DX) within which the panel must fit.\n"
"In current units."

#: flatcamGUI/FlatCAMGUI.py:6098 flatcamTools/ToolPanelize.py:212
msgid "Height (DY):"
msgstr "Height (DY):"

#: flatcamGUI/FlatCAMGUI.py:6100 flatcamTools/ToolPanelize.py:214
msgid ""
"The height (DY)within which the panel must fit.\n"
"In current units."
msgstr ""
"The height (DY)within which the panel must fit.\n"
"In current units."

#: flatcamGUI/FlatCAMGUI.py:6114
msgid "Calculators Tool Options"
msgstr "Calculators Tool Options"

#: flatcamGUI/FlatCAMGUI.py:6117
msgid "<b>V-Shape Tool Calculator:</b>"
msgstr "<b>V-Shape Tool Calculator:</b>"

#: flatcamGUI/FlatCAMGUI.py:6119
msgid ""
"Calculate the tool diameter for a given V-shape tool,\n"
"having the tip diameter, tip angle and\n"
"depth-of-cut as parameters."
msgstr ""
"Calculate the tool diameter for a given V-shape tool,\n"
"having the tip diameter, tip angle and\n"
"depth-of-cut as parameters."

#: flatcamGUI/FlatCAMGUI.py:6130 flatcamTools/ToolCalculators.py:94
msgid "Tip Diameter:"
msgstr "Tip Diameter:"

#: flatcamGUI/FlatCAMGUI.py:6132
msgid ""
"This is the tool tip diameter.\n"
"It is specified by manufacturer."
msgstr ""
"This is the tool tip diameter.\n"
"It is specified by manufacturer."

#: flatcamGUI/FlatCAMGUI.py:6140
msgid "Tip angle:"
msgstr "Tip angle:"

#: flatcamGUI/FlatCAMGUI.py:6142
msgid ""
"This is the angle on the tip of the tool.\n"
"It is specified by manufacturer."
msgstr ""
"This is the angle on the tip of the tool.\n"
"It is specified by manufacturer."

#: flatcamGUI/FlatCAMGUI.py:6152
msgid ""
"This is depth to cut into material.\n"
"In the CNCJob object it is the CutZ parameter."
msgstr ""
"This is depth to cut into material.\n"
"In the CNCJob object it is the CutZ parameter."

#: flatcamGUI/FlatCAMGUI.py:6159
msgid "<b>ElectroPlating Calculator:</b>"
msgstr "<b>ElectroPlating Calculator:</b>"

#: flatcamGUI/FlatCAMGUI.py:6161 flatcamTools/ToolCalculators.py:152
msgid ""
"This calculator is useful for those who plate the via/pad/drill holes,\n"
"using a method like grahite ink or calcium hypophosphite ink or palladium "
"chloride."
msgstr ""
"This calculator is useful for those who plate the via/pad/drill holes,\n"
"using a method like grahite ink or calcium hypophosphite ink or palladium "
"chloride."

#: flatcamGUI/FlatCAMGUI.py:6171 flatcamTools/ToolCalculators.py:161
msgid "Board Length:"
msgstr "Board Length:"

#: flatcamGUI/FlatCAMGUI.py:6173 flatcamTools/ToolCalculators.py:165
msgid "This is the board length. In centimeters."
msgstr "This is the board length. In centimeters."

#: flatcamGUI/FlatCAMGUI.py:6179 flatcamTools/ToolCalculators.py:167
msgid "Board Width:"
msgstr "Board Width:"

#: flatcamGUI/FlatCAMGUI.py:6181 flatcamTools/ToolCalculators.py:171
msgid "This is the board width.In centimeters."
msgstr "This is the board width.In centimeters."

#: flatcamGUI/FlatCAMGUI.py:6186 flatcamTools/ToolCalculators.py:173
msgid "Current Density:"
msgstr "Current Density:"

#: flatcamGUI/FlatCAMGUI.py:6189 flatcamTools/ToolCalculators.py:177
msgid ""
"Current density to pass through the board. \n"
"In Amps per Square Feet ASF."
msgstr ""
"Current density to pass through the board. \n"
"In Amps per Square Feet ASF."

#: flatcamGUI/FlatCAMGUI.py:6195 flatcamTools/ToolCalculators.py:181
msgid "Copper Growth:"
msgstr "Copper Growth:"

#: flatcamGUI/FlatCAMGUI.py:6198 flatcamTools/ToolCalculators.py:185
msgid ""
"How thick the copper growth is intended to be.\n"
"In microns."
msgstr ""
"How thick the copper growth is intended to be.\n"
"In microns."

#: flatcamGUI/FlatCAMGUI.py:6211
msgid "Transform Tool Options"
msgstr "Transform Tool Options"

#: flatcamGUI/FlatCAMGUI.py:6216
msgid ""
"Various transformations that can be applied\n"
"on a FlatCAM object."
msgstr ""
"Various transformations that can be applied\n"
"on a FlatCAM object."

#: flatcamGUI/FlatCAMGUI.py:6226
msgid "Rotate Angle:"
msgstr "Rotate Angle:"

#: flatcamGUI/FlatCAMGUI.py:6228
msgid "Angle for rotation. In degrees."
msgstr "Angle for rotation. In degrees."

#: flatcamGUI/FlatCAMGUI.py:6235
msgid "Skew_X angle:"
msgstr "Skew_X angle:"

#: flatcamGUI/FlatCAMGUI.py:6237
msgid "Angle for Skew/Shear on X axis. In degrees."
msgstr "Angle for Skew/Shear on X axis. In degrees."

#: flatcamGUI/FlatCAMGUI.py:6244
msgid "Skew_Y angle:"
msgstr "Skew_Y angle:"

#: flatcamGUI/FlatCAMGUI.py:6246
msgid "Angle for Skew/Shear on Y axis. In degrees."
msgstr "Angle for Skew/Shear on Y axis. In degrees."

#: flatcamGUI/FlatCAMGUI.py:6253
msgid "Scale_X factor:"
msgstr "Scale_X factor:"

#: flatcamGUI/FlatCAMGUI.py:6255
msgid "Factor for scaling on X axis."
msgstr "Factor for scaling on X axis."

#: flatcamGUI/FlatCAMGUI.py:6262
msgid "Scale_Y factor:"
msgstr "Scale_Y factor:"

#: flatcamGUI/FlatCAMGUI.py:6264
msgid "Factor for scaling on Y axis."
msgstr "Factor for scaling on Y axis."

#: flatcamGUI/FlatCAMGUI.py:6272
msgid ""
"Scale the selected object(s)\n"
"using the Scale_X factor for both axis."
msgstr ""
"Scale the selected object(s)\n"
"using the Scale_X factor for both axis."

#: flatcamGUI/FlatCAMGUI.py:6280 flatcamTools/ToolTransform.py:210
msgid ""
"Scale the selected object(s)\n"
"using the origin reference when checked,\n"
"and the center of the biggest bounding box\n"
"of the selected objects when unchecked."
msgstr ""
"Scale the selected object(s)\n"
"using the origin reference when checked,\n"
"and the center of the biggest bounding box\n"
"of the selected objects when unchecked."

#: flatcamGUI/FlatCAMGUI.py:6289
msgid "Offset_X val:"
msgstr "Offset_X val:"

#: flatcamGUI/FlatCAMGUI.py:6291
msgid "Distance to offset on X axis. In current units."
msgstr "Distance to offset on X axis. In current units."

#: flatcamGUI/FlatCAMGUI.py:6298
msgid "Offset_Y val:"
msgstr "Offset_Y val:"

#: flatcamGUI/FlatCAMGUI.py:6300
msgid "Distance to offset on Y axis. In current units."
msgstr "Distance to offset on Y axis. In current units."

#: flatcamGUI/FlatCAMGUI.py:6306
msgid "Mirror Reference"
msgstr "Mirror Reference"

#: flatcamGUI/FlatCAMGUI.py:6308 flatcamTools/ToolTransform.py:314
msgid ""
"Flip the selected object(s)\n"
"around the point in Point Entry Field.\n"
"\n"
"The point coordinates can be captured by\n"
"left click on canvas together with pressing\n"
"SHIFT key. \n"
"Then click Add button to insert coordinates.\n"
"Or enter the coords in format (x, y) in the\n"
"Point Entry field and click Flip on X(Y)"
msgstr ""
"Flip the selected object(s)\n"
"around the point in Point Entry Field.\n"
"\n"
"The point coordinates can be captured by\n"
"left click on canvas together with pressing\n"
"SHIFT key. \n"
"Then click Add button to insert coordinates.\n"
"Or enter the coords in format (x, y) in the\n"
"Point Entry field and click Flip on X(Y)"

#: flatcamGUI/FlatCAMGUI.py:6319
msgid " Mirror Ref. Point:"
msgstr " Mirror Ref. Point:"

#: flatcamGUI/FlatCAMGUI.py:6321 flatcamTools/ToolTransform.py:327
msgid ""
"Coordinates in format (x, y) used as reference for mirroring.\n"
"The 'x' in (x, y) will be used when using Flip on X and\n"
"the 'y' in (x, y) will be used when using Flip on Y and"
msgstr ""
"Coordinates in format (x, y) used as reference for mirroring.\n"
"The 'x' in (x, y) will be used when using Flip on X and\n"
"the 'y' in (x, y) will be used when using Flip on Y and"

#: flatcamGUI/FlatCAMGUI.py:6338
msgid "SolderPaste Tool Options"
msgstr "SolderPaste Tool Options"

#: flatcamGUI/FlatCAMGUI.py:6343
msgid ""
"A tool to create GCode for dispensing\n"
"solder paste onto a PCB."
msgstr ""
"A tool to create GCode for dispensing\n"
"solder paste onto a PCB."

#: flatcamGUI/FlatCAMGUI.py:6354
msgid "Diameters of nozzle tools, separated by ','"
msgstr "Diameters of nozzle tools, separated by ','"

#: flatcamGUI/FlatCAMGUI.py:6361
msgid "<b>New Nozzle Dia:</b>"
msgstr "<b>New Nozzle Dia:</b>"

#: flatcamGUI/FlatCAMGUI.py:6363 flatcamTools/ToolSolderPaste.py:103
msgid "Diameter for the new Nozzle tool to add in the Tool Table"
msgstr "Diameter for the new Nozzle tool to add in the Tool Table"

#: flatcamGUI/FlatCAMGUI.py:6371 flatcamTools/ToolSolderPaste.py:166
msgid "Z Dispense Start:"
msgstr "Z Dispense Start:"

#: flatcamGUI/FlatCAMGUI.py:6373 flatcamTools/ToolSolderPaste.py:168
msgid "The height (Z) when solder paste dispensing starts."
msgstr "The height (Z) when solder paste dispensing starts."

#: flatcamGUI/FlatCAMGUI.py:6380 flatcamTools/ToolSolderPaste.py:174
msgid "Z Dispense:"
msgstr "Z Dispense:"

#: flatcamGUI/FlatCAMGUI.py:6382 flatcamTools/ToolSolderPaste.py:176
msgid "The height (Z) when doing solder paste dispensing."
msgstr "The height (Z) when doing solder paste dispensing."

#: flatcamGUI/FlatCAMGUI.py:6389 flatcamTools/ToolSolderPaste.py:183
msgid "Z Dispense Stop:"
msgstr "Z Dispense Stop:"

#: flatcamGUI/FlatCAMGUI.py:6391 flatcamTools/ToolSolderPaste.py:185
msgid "The height (Z) when solder paste dispensing stops."
msgstr "The height (Z) when solder paste dispensing stops."

#: flatcamGUI/FlatCAMGUI.py:6398 flatcamTools/ToolSolderPaste.py:191
msgid "Z Travel:"
msgstr "Z Travel:"

#: flatcamGUI/FlatCAMGUI.py:6400 flatcamTools/ToolSolderPaste.py:193
msgid ""
"The height (Z) for travel between pads\n"
"(without dispensing solder paste)."
msgstr ""
"The height (Z) for travel between pads\n"
"(without dispensing solder paste)."

#: flatcamGUI/FlatCAMGUI.py:6408 flatcamTools/ToolSolderPaste.py:200
msgid "Z Toolchange:"
msgstr "Z Toolchange:"

#: flatcamGUI/FlatCAMGUI.py:6410 flatcamTools/ToolSolderPaste.py:202
msgid "The height (Z) for tool (nozzle) change."
msgstr "The height (Z) for tool (nozzle) change."

#: flatcamGUI/FlatCAMGUI.py:6417 flatcamTools/ToolSolderPaste.py:208
msgid "XY Toolchange:"
msgstr "XY Toolchange:"

#: flatcamGUI/FlatCAMGUI.py:6419 flatcamTools/ToolSolderPaste.py:210
msgid ""
"The X,Y location for tool (nozzle) change.\n"
"The format is (x, y) where x and y are real numbers."
msgstr ""
"The X,Y location for tool (nozzle) change.\n"
"The format is (x, y) where x and y are real numbers."

#: flatcamGUI/FlatCAMGUI.py:6427 flatcamTools/ToolSolderPaste.py:217
msgid "Feedrate X-Y:"
msgstr "Feedrate X-Y:"

#: flatcamGUI/FlatCAMGUI.py:6429 flatcamTools/ToolSolderPaste.py:219
msgid "Feedrate (speed) while moving on the X-Y plane."
msgstr "Feedrate (speed) while moving on the X-Y plane."

#: flatcamGUI/FlatCAMGUI.py:6436 flatcamTools/ToolSolderPaste.py:225
msgid "Feedrate Z:"
msgstr "Feedrate Z:"

#: flatcamGUI/FlatCAMGUI.py:6438 flatcamTools/ToolSolderPaste.py:227
msgid ""
"Feedrate (speed) while moving vertically\n"
"(on Z plane)."
msgstr ""
"Feedrate (speed) while moving vertically\n"
"(on Z plane)."

#: flatcamGUI/FlatCAMGUI.py:6446 flatcamTools/ToolSolderPaste.py:234
msgid "Feedrate Z Dispense:"
msgstr "Feedrate Z Dispense:"

#: flatcamGUI/FlatCAMGUI.py:6448 flatcamTools/ToolSolderPaste.py:236
msgid ""
"Feedrate (speed) while moving up vertically\n"
" to Dispense position (on Z plane)."
msgstr ""
"Feedrate (speed) while moving up vertically\n"
" to Dispense position (on Z plane)."

#: flatcamGUI/FlatCAMGUI.py:6456 flatcamTools/ToolSolderPaste.py:243
msgid "Spindle Speed FWD:"
msgstr "Spindle Speed FWD:"

#: flatcamGUI/FlatCAMGUI.py:6458 flatcamTools/ToolSolderPaste.py:245
msgid ""
"The dispenser speed while pushing solder paste\n"
"through the dispenser nozzle."
msgstr ""
"The dispenser speed while pushing solder paste\n"
"through the dispenser nozzle."

#: flatcamGUI/FlatCAMGUI.py:6466 flatcamTools/ToolSolderPaste.py:252
msgid "Dwell FWD:"
msgstr "Dwell FWD:"

#: flatcamGUI/FlatCAMGUI.py:6468 flatcamTools/ToolSolderPaste.py:254
msgid "Pause after solder dispensing."
msgstr "Pause after solder dispensing."

#: flatcamGUI/FlatCAMGUI.py:6475 flatcamTools/ToolSolderPaste.py:260
msgid "Spindle Speed REV:"
msgstr "Spindle Speed REV:"

#: flatcamGUI/FlatCAMGUI.py:6477 flatcamTools/ToolSolderPaste.py:262
msgid ""
"The dispenser speed while retracting solder paste\n"
"through the dispenser nozzle."
msgstr ""
"The dispenser speed while retracting solder paste\n"
"through the dispenser nozzle."

#: flatcamGUI/FlatCAMGUI.py:6485 flatcamTools/ToolSolderPaste.py:269
msgid "Dwell REV:"
msgstr "Dwell REV:"

#: flatcamGUI/FlatCAMGUI.py:6487 flatcamTools/ToolSolderPaste.py:271
msgid ""
"Pause after solder paste dispenser retracted,\n"
"to allow pressure equilibrium."
msgstr ""
"Pause after solder paste dispenser retracted,\n"
"to allow pressure equilibrium."

#: flatcamGUI/FlatCAMGUI.py:6494 flatcamTools/ToolSolderPaste.py:277
msgid "PostProcessors:"
msgstr "PostProcessors:"

#: flatcamGUI/FlatCAMGUI.py:6496 flatcamTools/ToolSolderPaste.py:279
msgid "Files that control the GCode generation."
msgstr "Files that control the GCode generation."

#: flatcamGUI/FlatCAMGUI.py:6526 flatcamGUI/FlatCAMGUI.py:6532
msgid "Idle."
msgstr "Idle."

#: flatcamGUI/FlatCAMGUI.py:6556
msgid "Application started ..."
msgstr "Application started ..."

#: flatcamGUI/FlatCAMGUI.py:6557
msgid "Hello!"
msgstr "Hello!"

#: flatcamGUI/ObjectUI.py:33
msgid "FlatCAM Object"
msgstr "FlatCAM Object"

#: flatcamGUI/ObjectUI.py:58
msgid ""
"BASIC is suitable for a beginner. Many parameters\n"
"are hidden from the user in this mode.\n"
"ADVANCED mode will make available all parameters.\n"
"\n"
"To change the application LEVEL, go to:\n"
"Edit -> Preferences -> General and check:\n"
"'APP. LEVEL' radio button."
msgstr ""
"BASIC is suitable for a beginner. Many parameters\n"
"are hidden from the user in this mode.\n"
"ADVANCED mode will make available all parameters.\n"
"\n"
"To change the application LEVEL, go to:\n"
"Edit -> Preferences -> General and check:\n"
"'APP. LEVEL' radio button."

#: flatcamGUI/ObjectUI.py:79
msgid "<b>Scale:</b>"
msgstr "<b>Scale:</b>"

#: flatcamGUI/ObjectUI.py:81
msgid "Change the size of the object."
msgstr "Change the size of the object."

#: flatcamGUI/ObjectUI.py:89
msgid "Factor:"
msgstr "Factor:"

#: flatcamGUI/ObjectUI.py:91
msgid ""
"Factor by which to multiply\n"
"geometric features of this object."
msgstr ""
"Factor by which to multiply\n"
"geometric features of this object."

#: flatcamGUI/ObjectUI.py:102
msgid "Perform scaling operation."
msgstr "Perform scaling operation."

#: flatcamGUI/ObjectUI.py:108
msgid "<b>Offset:</b>"
msgstr "<b>Offset:</b>"

#: flatcamGUI/ObjectUI.py:110
msgid "Change the position of this object."
msgstr "Change the position of this object."

#: flatcamGUI/ObjectUI.py:117
msgid "Vector:"
msgstr "Vector:"

#: flatcamGUI/ObjectUI.py:119
msgid ""
"Amount by which to move the object\n"
"in the x and y axes in (x, y) format."
msgstr ""
"Amount by which to move the object\n"
"in the x and y axes in (x, y) format."

#: flatcamGUI/ObjectUI.py:129
msgid "Perform the offset operation."
msgstr "Perform the offset operation."

#: flatcamGUI/ObjectUI.py:143
msgid "Gerber Object"
msgstr "Gerber Object"

#: flatcamGUI/ObjectUI.py:182 flatcamGUI/ObjectUI.py:517
#: flatcamGUI/ObjectUI.py:839 flatcamGUI/ObjectUI.py:1372
msgid "<b>Name:</b>"
msgstr "<b>Name:</b>"

#: flatcamGUI/ObjectUI.py:203
msgid ""
"Toggle the display of the Gerber Apertures Table.\n"
"When unchecked, it will delete all mark shapes\n"
"that are drawn on canvas."
msgstr ""
"Toggle the display of the Gerber Apertures Table.\n"
"When unchecked, it will delete all mark shapes\n"
"that are drawn on canvas."

#: flatcamGUI/ObjectUI.py:214
msgid "Mark All"
msgstr "Mark All"

#: flatcamGUI/ObjectUI.py:216
msgid ""
"When checked it will display all the apertures.\n"
"When unchecked, it will delete all mark shapes\n"
"that are drawn on canvas."
msgstr ""
"When checked it will display all the apertures.\n"
"When unchecked, it will delete all mark shapes\n"
"that are drawn on canvas."

#: flatcamGUI/ObjectUI.py:244
msgid "Mark the aperture instances on canvas."
msgstr "Mark the aperture instances on canvas."

#: flatcamGUI/ObjectUI.py:262
msgid ""
"Diameter of the cutting tool.\n"
"If you want to have an isolation path\n"
"inside the actual shape of the Gerber\n"
"feature, use a negative value for\n"
"this parameter."
msgstr ""
"Diameter of the cutting tool.\n"
"If you want to have an isolation path\n"
"inside the actual shape of the Gerber\n"
"feature, use a negative value for\n"
"this parameter."

#: flatcamGUI/ObjectUI.py:273
msgid "Passes:"
msgstr "Passes:"

#: flatcamGUI/ObjectUI.py:307
msgid "Combine"
msgstr "Combine"

#: flatcamGUI/ObjectUI.py:323
msgid "<b>Generate Isolation Geometry:</b>"
msgstr "<b>Generate Isolation Geometry:</b>"

#: flatcamGUI/ObjectUI.py:325
msgid ""
"Create a Geometry object with toolpaths to cut \n"
"isolation outside, inside or on both sides of the\n"
"object. For a Gerber object outside means outside\n"
"of the Gerber feature and inside means inside of\n"
"the Gerber feature, if possible at all. This means\n"
"that only if the Gerber feature has openings inside, they\n"
"will be isolated. If what is wanted is to cut isolation\n"
"inside the actual Gerber feature, use a negative tool\n"
"diameter above."
msgstr ""
"Create a Geometry object with toolpaths to cut \n"
"isolation outside, inside or on both sides of the\n"
"object. For a Gerber object outside means outside\n"
"of the Gerber feature and inside means inside of\n"
"the Gerber feature, if possible at all. This means\n"
"that only if the Gerber feature has openings inside, they\n"
"will be isolated. If what is wanted is to cut isolation\n"
"inside the actual Gerber feature, use a negative tool\n"
"diameter above."

#: flatcamGUI/ObjectUI.py:344
msgid "FULL Geo"
msgstr "FULL Geo"

#: flatcamGUI/ObjectUI.py:346
msgid ""
"Create the Geometry Object\n"
"for isolation routing. It contains both\n"
"the interiors and exteriors geometry."
msgstr ""
"Create the Geometry Object\n"
"for isolation routing. It contains both\n"
"the interiors and exteriors geometry."

#: flatcamGUI/ObjectUI.py:355
msgid "Ext Geo"
msgstr "Ext Geo"

#: flatcamGUI/ObjectUI.py:357
msgid ""
"Create the Geometry Object\n"
"for isolation routing containing\n"
"only the exteriors geometry."
msgstr ""
"Create the Geometry Object\n"
"for isolation routing containing\n"
"only the exteriors geometry."

#: flatcamGUI/ObjectUI.py:364
msgid "Int Geo"
msgstr "Int Geo"

#: flatcamGUI/ObjectUI.py:366
msgid ""
"Create the Geometry Object\n"
"for isolation routing containing\n"
"only the interiors geometry."
msgstr ""
"Create the Geometry Object\n"
"for isolation routing containing\n"
"only the interiors geometry."

#: flatcamGUI/ObjectUI.py:384
msgid "<b>Clear N-copper:</b>"
msgstr "<b>Clear N-copper:</b>"

#: flatcamGUI/ObjectUI.py:394 flatcamTools/ToolNonCopperClear.py:240
msgid ""
"Create the Geometry Object\n"
"for non-copper routing."
msgstr ""
"Create the Geometry Object\n"
"for non-copper routing."

#: flatcamGUI/ObjectUI.py:400
msgid "<b>Board cutout:</b>"
msgstr "<b>Board cutout:</b>"

#: flatcamGUI/ObjectUI.py:408
msgid "Cutout Tool"
msgstr "Cutout Tool"

#: flatcamGUI/ObjectUI.py:410
msgid ""
"Generate the geometry for\n"
"the board cutout."
msgstr ""
"Generate the geometry for\n"
"the board cutout."

#: flatcamGUI/ObjectUI.py:416
msgid "<b>Non-copper regions:</b>"
msgstr "<b>Non-copper regions:</b>"

#: flatcamGUI/ObjectUI.py:418
msgid ""
"Create polygons covering the\n"
"areas without copper on the PCB.\n"
"Equivalent to the inverse of this\n"
"object. Can be used to remove all\n"
"copper from a specified region."
msgstr ""
"Create polygons covering the\n"
"areas without copper on the PCB.\n"
"Equivalent to the inverse of this\n"
"object. Can be used to remove all\n"
"copper from a specified region."

#: flatcamGUI/ObjectUI.py:443 flatcamGUI/ObjectUI.py:474
msgid "Rounded Geo"
msgstr "Rounded Geo"

#: flatcamGUI/ObjectUI.py:445
msgid "Resulting geometry will have rounded corners."
msgstr "Resulting geometry will have rounded corners."

#: flatcamGUI/ObjectUI.py:450 flatcamGUI/ObjectUI.py:484
#: flatcamTools/ToolCutOut.py:168 flatcamTools/ToolCutOut.py:188
#: flatcamTools/ToolCutOut.py:239 flatcamTools/ToolSolderPaste.py:127
msgid "Generate Geo"
msgstr "Generate Geo"

#: flatcamGUI/ObjectUI.py:456
msgid ""
"Create a geometry surrounding the Gerber object.\n"
"Square shape."
msgstr ""
"Create a geometry surrounding the Gerber object.\n"
"Square shape."

#: flatcamGUI/ObjectUI.py:486
msgid "Generate the Geometry object."
msgstr "Generate the Geometry object."

#: flatcamGUI/ObjectUI.py:497
msgid "Excellon Object"
msgstr "Excellon Object"

#: flatcamGUI/ObjectUI.py:508
msgid "Solid circles."
msgstr "Solid circles."

#: flatcamGUI/ObjectUI.py:536 flatcamGUI/ObjectUI.py:858
msgid "<b>Tools Table</b>"
msgstr "<b>Tools Table</b>"

#: flatcamGUI/ObjectUI.py:556
msgid "Drills"
msgstr "Drills"

#: flatcamGUI/ObjectUI.py:556
msgid "Slots"
msgstr "Slots"

#: flatcamGUI/ObjectUI.py:557
msgid "Offset Z"
msgstr "Offset Z"

#: flatcamGUI/ObjectUI.py:561
msgid ""
"This is the Tool Number.\n"
"When ToolChange is checked, on toolchange event this value\n"
"will be showed as a T1, T2 ... Tn in the Machine Code."
msgstr ""
"This is the Tool Number.\n"
"When ToolChange is checked, on toolchange event this value\n"
"will be showed as a T1, T2 ... Tn in the Machine Code."

#: flatcamGUI/ObjectUI.py:565 flatcamGUI/ObjectUI.py:904
#: flatcamTools/ToolNonCopperClear.py:97 flatcamTools/ToolPaint.py:94
msgid ""
"Tool Diameter. It's value (in current FlatCAM units) \n"
"is the cut width into the material."
msgstr ""
"Tool Diameter. It's value (in current FlatCAM units) \n"
"is the cut width into the material."

#: flatcamGUI/ObjectUI.py:568
msgid ""
"The number of Drill holes. Holes that are drilled with\n"
"a drill bit."
msgstr ""
"The number of Drill holes. Holes that are drilled with\n"
"a drill bit."

#: flatcamGUI/ObjectUI.py:571
msgid ""
"The number of Slot holes. Holes that are created by\n"
"milling them with an endmill bit."
msgstr ""
"The number of Slot holes. Holes that are created by\n"
"milling them with an endmill bit."

#: flatcamGUI/ObjectUI.py:578
msgid "Toggle display of the drills for the current tool."
msgstr "Toggle display of the drills for the current tool."

#: flatcamGUI/ObjectUI.py:586
msgid ""
"Create a CNC Job object\n"
"for this drill object."
msgstr ""
"Create a CNC Job object\n"
"for this drill object."

#: flatcamGUI/ObjectUI.py:615 flatcamGUI/ObjectUI.py:1118
msgid "Tool change"
msgstr "Tool change"

#: flatcamGUI/ObjectUI.py:623 flatcamGUI/ObjectUI.py:1111
msgid "Tool change Z:"
msgstr "Tool change Z:"

#: flatcamGUI/ObjectUI.py:625 flatcamGUI/ObjectUI.py:1114
msgid ""
"Z-axis position (height) for\n"
"tool change."
msgstr ""
"Z-axis position (height) for\n"
"tool change."

#: flatcamGUI/ObjectUI.py:636
msgid ""
"Tool height just before starting the work.\n"
"Delete the value if you don't need this feature."
msgstr ""
"Tool height just before starting the work.\n"
"Delete the value if you don't need this feature."

#: flatcamGUI/ObjectUI.py:646
msgid ""
"Z-axis position (height) for\n"
"the last move."
msgstr ""
"Z-axis position (height) for\n"
"the last move."

#: flatcamGUI/ObjectUI.py:654
msgid "Feedrate (Plunge):"
msgstr "Feedrate (Plunge):"

#: flatcamGUI/ObjectUI.py:656
msgid ""
"Tool speed while drilling\n"
"(in units per minute).\n"
"This is for linear move G01."
msgstr ""
"Tool speed while drilling\n"
"(in units per minute).\n"
"This is for linear move G01."

#: flatcamGUI/ObjectUI.py:709
msgid ""
"The json file that dictates\n"
"gcode output."
msgstr ""
"The json file that dictates\n"
"gcode output."

#: flatcamGUI/ObjectUI.py:741
msgid ""
"Select from the Tools Table above\n"
"the tools you want to include."
msgstr ""
"Select from the Tools Table above\n"
"the tools you want to include."

#: flatcamGUI/ObjectUI.py:748
msgid "<b>Type:    </b>"
msgstr "<b>Type:    </b>"

#: flatcamGUI/ObjectUI.py:750
msgid ""
"Choose what to use for GCode generation:\n"
"'Drills', 'Slots' or 'Both'.\n"
"When choosing 'Slots' or 'Both', slots will be\n"
"converted to a series of drills."
msgstr ""
"Choose what to use for GCode generation:\n"
"'Drills', 'Slots' or 'Both'.\n"
"When choosing 'Slots' or 'Both', slots will be\n"
"converted to a series of drills."

#: flatcamGUI/ObjectUI.py:765
msgid "Create GCode"
msgstr "Create GCode"

#: flatcamGUI/ObjectUI.py:767
msgid "Generate the CNC Job."
msgstr "Generate the CNC Job."

#: flatcamGUI/ObjectUI.py:779
msgid ""
"Select from the Tools Table above\n"
" the hole dias that are to be milled."
msgstr ""
"Select from the Tools Table above\n"
" the hole dias that are to be milled."

#: flatcamGUI/ObjectUI.py:786
msgid "Drills Tool dia:"
msgstr "Drills Tool dia:"

#: flatcamGUI/ObjectUI.py:793
msgid "Mill Drills Geo"
msgstr "Mill Drills Geo"

#: flatcamGUI/ObjectUI.py:795
msgid ""
"Create the Geometry Object\n"
"for milling DRILLS toolpaths."
msgstr ""
"Create the Geometry Object\n"
"for milling DRILLS toolpaths."

#: flatcamGUI/ObjectUI.py:802
msgid "Slots Tool dia:"
msgstr "Slots Tool dia:"

#: flatcamGUI/ObjectUI.py:809
msgid "Mill Slots Geo"
msgstr "Mill Slots Geo"

#: flatcamGUI/ObjectUI.py:811
msgid ""
"Create the Geometry Object\n"
"for milling SLOTS toolpaths."
msgstr ""
"Create the Geometry Object\n"
"for milling SLOTS toolpaths."

#: flatcamGUI/ObjectUI.py:829
msgid "Geometry Object"
msgstr "Geometry Object"

#: flatcamGUI/ObjectUI.py:860
msgid ""
"Tools in this Geometry object used for cutting.\n"
"The 'Offset' entry will set an offset for the cut.\n"
"'Offset' can be inside, outside, on path (none) and custom.\n"
"'Type' entry is only informative and it allow to know the \n"
"intent of using the current tool. \n"
"It can be Rough(ing), Finish(ing) or Iso(lation).\n"
"The 'Tool type'(TT) can be circular with 1 to 4 teeths(C1..C4),\n"
"ball(B), or V-Shaped(V). \n"
"When V-shaped is selected the 'Type' entry is automatically \n"
"set to Isolation, the CutZ parameter in the UI form is\n"
"grayed out and Cut Z is automatically calculated from the newly \n"
"showed UI form entries named V-Tip Dia and V-Tip Angle."
msgstr ""
"Tools in this Geometry object used for cutting.\n"
"The 'Offset' entry will set an offset for the cut.\n"
"'Offset' can be inside, outside, on path (none) and custom.\n"
"'Type' entry is only informative and it allow to know the \n"
"intent of using the current tool. \n"
"It can be Rough(ing), Finish(ing) or Iso(lation).\n"
"The 'Tool type'(TT) can be circular with 1 to 4 teeths(C1..C4),\n"
"ball(B), or V-Shaped(V). \n"
"When V-shaped is selected the 'Type' entry is automatically \n"
"set to Isolation, the CutZ parameter in the UI form is\n"
"grayed out and Cut Z is automatically calculated from the newly \n"
"showed UI form entries named V-Tip Dia and V-Tip Angle."

#: flatcamGUI/ObjectUI.py:891 flatcamGUI/ObjectUI.py:1452
msgid "Dia"
msgstr "Dia"

#: flatcamGUI/ObjectUI.py:891 flatcamGUI/ObjectUI.py:1452
msgid "TT"
msgstr "TT"

#: flatcamGUI/ObjectUI.py:898
msgid ""
"This is the Tool Number.\n"
"When ToolChange is checked, on toolchange event this value\n"
"will be showed as a T1, T2 ... Tn"
msgstr ""
"This is the Tool Number.\n"
"When ToolChange is checked, on toolchange event this value\n"
"will be showed as a T1, T2 ... Tn"

#: flatcamGUI/ObjectUI.py:909
msgid ""
"The value for the Offset can be:\n"
"- Path -> There is no offset, the tool cut will be done through the geometry "
"line.\n"
"- In(side) -> The tool cut will follow the geometry inside. It will create a "
"'pocket'.\n"
"- Out(side) -> The tool cut will follow the geometry line on the outside."
msgstr ""
"The value for the Offset can be:\n"
"- Path -> There is no offset, the tool cut will be done through the geometry "
"line.\n"
"- In(side) -> The tool cut will follow the geometry inside. It will create a "
"'pocket'.\n"
"- Out(side) -> The tool cut will follow the geometry line on the outside."

#: flatcamGUI/ObjectUI.py:916
msgid ""
"The (Operation) Type has only informative value. Usually the UI form "
"values \n"
"are choosed based on the operation type and this will serve as a reminder.\n"
"Can be 'Roughing', 'Finishing' or 'Isolation'.\n"
"For Roughing we may choose a lower Feedrate and multiDepth cut.\n"
"For Finishing we may choose a higher Feedrate, without multiDepth.\n"
"For Isolation we need a lower Feedrate as it use a milling bit with a fine "
"tip."
msgstr ""
"The (Operation) Type has only informative value. Usually the UI form "
"values \n"
"are choosed based on the operation type and this will serve as a reminder.\n"
"Can be 'Roughing', 'Finishing' or 'Isolation'.\n"
"For Roughing we may choose a lower Feedrate and multiDepth cut.\n"
"For Finishing we may choose a higher Feedrate, without multiDepth.\n"
"For Isolation we need a lower Feedrate as it use a milling bit with a fine "
"tip."

#: flatcamGUI/ObjectUI.py:925
msgid ""
"The Tool Type (TT) can be:\n"
"- Circular with 1 ... 4 teeth -> it is informative only. Being circular the "
"cut width in material\n"
"is exactly the tool diameter.\n"
"- Ball -> informative only and make reference to the Ball type endmill.\n"
"- V-Shape -> it will disable de Z-Cut parameter in the UI form and enable "
"two additional UI form\n"
"fields: V-Tip Dia and V-Tip Angle. Adjusting those two values will adjust "
"the Z-Cut parameter such\n"
"as the cut width into material will be equal with the value in the Tool "
"Diameter column of this table.\n"
"Choosing the V-Shape Tool Type automatically will select the Operation Type "
"as Isolation."
msgstr ""
"The Tool Type (TT) can be:\n"
"- Circular with 1 ... 4 teeth -> it is informative only. Being circular the "
"cut width in material\n"
"is exactly the tool diameter.\n"
"- Ball -> informative only and make reference to the Ball type endmill.\n"
"- V-Shape -> it will disable de Z-Cut parameter in the UI form and enable "
"two additional UI form\n"
"fields: V-Tip Dia and V-Tip Angle. Adjusting those two values will adjust "
"the Z-Cut parameter such\n"
"as the cut width into material will be equal with the value in the Tool "
"Diameter column of this table.\n"
"Choosing the V-Shape Tool Type automatically will select the Operation Type "
"as Isolation."

#: flatcamGUI/ObjectUI.py:936
msgid ""
"Plot column. It is visible only for MultiGeo geometries, meaning geometries "
"that holds the geometry\n"
"data into the tools. For those geometries, deleting the tool will delete the "
"geometry data also,\n"
"so be WARNED. From the checkboxes on each row it can be enabled/disabled the "
"plot on canvas\n"
"for the corresponding tool."
msgstr ""
"Plot column. It is visible only for MultiGeo geometries, meaning geometries "
"that holds the geometry\n"
"data into the tools. For those geometries, deleting the tool will delete the "
"geometry data also,\n"
"so be WARNED. From the checkboxes on each row it can be enabled/disabled the "
"plot on canvas\n"
"for the corresponding tool."

#: flatcamGUI/ObjectUI.py:949
msgid "Tool Offset:"
msgstr "Tool Offset:"

#: flatcamGUI/ObjectUI.py:952
msgid ""
"The value to offset the cut when \n"
"the Offset type selected is 'Offset'.\n"
"The value can be positive for 'outside'\n"
"cut and negative for 'inside' cut."
msgstr ""
"The value to offset the cut when \n"
"the Offset type selected is 'Offset'.\n"
"The value can be positive for 'outside'\n"
"cut and negative for 'inside' cut."

#: flatcamGUI/ObjectUI.py:975
msgid "<b>Tool Dia:</b>"
msgstr "<b>Tool Dia:</b>"

#: flatcamGUI/ObjectUI.py:994 flatcamTools/ToolNonCopperClear.py:136
#: flatcamTools/ToolPaint.py:133
msgid ""
"Add a new tool to the Tool Table\n"
"with the diameter specified above."
msgstr ""
"Add a new tool to the Tool Table\n"
"with the diameter specified above."

#: flatcamGUI/ObjectUI.py:1002
msgid ""
"Copy a selection of tools in the Tool Table\n"
"by first selecting a row in the Tool Table."
msgstr ""
"Copy a selection of tools in the Tool Table\n"
"by first selecting a row in the Tool Table."

#: flatcamGUI/ObjectUI.py:1010
msgid ""
"Delete a selection of tools in the Tool Table\n"
"by first selecting a row in the Tool Table."
msgstr ""
"Delete a selection of tools in the Tool Table\n"
"by first selecting a row in the Tool Table."

#: flatcamGUI/ObjectUI.py:1026
msgid "<b>Tool Data</b>"
msgstr "<b>Tool Data</b>"

#: flatcamGUI/ObjectUI.py:1029
msgid ""
"The data used for creating GCode.\n"
"Each tool store it's own set of such data."
msgstr ""
"The data used for creating GCode.\n"
"Each tool store it's own set of such data."

#: flatcamGUI/ObjectUI.py:1039
msgid "V-Tip Dia:"
msgstr "V-Tip Dia:"

#: flatcamGUI/ObjectUI.py:1042
msgid "The tip diameter for V-Shape Tool"
msgstr "The tip diameter for V-Shape Tool"

#: flatcamGUI/ObjectUI.py:1050
msgid "V-Tip Angle:"
msgstr "V-Tip Angle:"

#: flatcamGUI/ObjectUI.py:1053
msgid ""
"The tip angle for V-Shape Tool.\n"
"In degree."
msgstr ""
"The tip angle for V-Shape Tool.\n"
"In degree."

#: flatcamGUI/ObjectUI.py:1074
msgid "Multi-Depth:"
msgstr "Multi-Depth:"

#: flatcamGUI/ObjectUI.py:1077
msgid ""
"Use multiple passes to limit\n"
"the cut depth in each pass. Will\n"
"cut multiple times until Cut Z is\n"
"reached.\n"
"To the right, input the depth of \n"
"each pass (positive value)."
msgstr ""
"Use multiple passes to limit\n"
"the cut depth in each pass. Will\n"
"cut multiple times until Cut Z is\n"
"reached.\n"
"To the right, input the depth of \n"
"each pass (positive value)."

#: flatcamGUI/ObjectUI.py:1090
msgid "Depth of each pass (positive)."
msgstr "Depth of each pass (positive)."

#: flatcamGUI/ObjectUI.py:1121
msgid ""
"Include tool-change sequence\n"
"in the Machine Code (Pause for tool change)."
msgstr ""
"Include tool-change sequence\n"
"in the Machine Code (Pause for tool change)."

#: flatcamGUI/ObjectUI.py:1147
msgid ""
"This is the height (Z) at which the CNC\n"
"will go as the last move."
msgstr ""
"This is the height (Z) at which the CNC\n"
"will go as the last move."

#: flatcamGUI/ObjectUI.py:1168
msgid "Feed Rate Z (Plunge):"
msgstr "Feed Rate Z (Plunge):"

#: flatcamGUI/ObjectUI.py:1171
msgid ""
"Cutting speed in the Z\n"
"plane in units per minute"
msgstr ""
"Cutting speed in the Z\n"
"plane in units per minute"

#: flatcamGUI/ObjectUI.py:1180
msgid "Feed Rate Rapids:"
msgstr "Feed Rate Rapids:"

#: flatcamGUI/ObjectUI.py:1183
msgid ""
"Cutting speed in the XY\n"
"plane in units per minute\n"
"(in units per minute).\n"
"This is for the rapid move G00.\n"
"It is useful only for Marlin,\n"
"ignore for any other cases."
msgstr ""
"Cutting speed in the XY\n"
"plane in units per minute\n"
"(in units per minute).\n"
"This is for the rapid move G00.\n"
"It is useful only for Marlin,\n"
"ignore for any other cases."

#: flatcamGUI/ObjectUI.py:1199
msgid "Cut over 1st pt"
msgstr "Cut over 1st pt"

#: flatcamGUI/ObjectUI.py:1214
msgid ""
"Speed of the spindle in RPM (optional).\n"
"If LASER postprocessor is used,\n"
"this value is the power of laser."
msgstr ""
"Speed of the spindle in RPM (optional).\n"
"If LASER postprocessor is used,\n"
"this value is the power of laser."

#: flatcamGUI/ObjectUI.py:1243
msgid "PostProcessor:"
msgstr "PostProcessor:"

#: flatcamGUI/ObjectUI.py:1246
msgid ""
"The Postprocessor file that dictates\n"
"the Machine Code (like GCode, RML, HPGL) output."
msgstr ""
"The Postprocessor file that dictates\n"
"the Machine Code (like GCode, RML, HPGL) output."

#: flatcamGUI/ObjectUI.py:1284
msgid ""
"Add at least one tool in the tool-table.\n"
"Click the header to select all, or Ctrl + LMB\n"
"for custom selection of tools."
msgstr ""
"Add at least one tool in the tool-table.\n"
"Click the header to select all, or Ctrl + LMB\n"
"for custom selection of tools."

#: flatcamGUI/ObjectUI.py:1291
msgid "Generate"
msgstr "Generate"

#: flatcamGUI/ObjectUI.py:1294
msgid "Generate the CNC Job object."
msgstr "Generate the CNC Job object."

#: flatcamGUI/ObjectUI.py:1302
msgid "<b>Paint Area:</b>"
msgstr "<b>Paint Area:</b>"

#: flatcamGUI/ObjectUI.py:1317
msgid "Launch Paint Tool in Tools Tab."
msgstr "Launch Paint Tool in Tools Tab."

#: flatcamGUI/ObjectUI.py:1334
msgid "CNC Job Object"
msgstr "CNC Job Object"

#: flatcamGUI/ObjectUI.py:1353
msgid "<b>Plot kind:</b>"
msgstr "<b>Plot kind:</b>"

#: flatcamGUI/ObjectUI.py:1378
msgid "<b>Travelled dist.:</b>"
msgstr "<b>Travelled dist.:</b>"

#: flatcamGUI/ObjectUI.py:1381 flatcamGUI/ObjectUI.py:1388
msgid ""
"This is the total travelled distance on X-Y plane.\n"
"In current units."
msgstr ""
"This is the total travelled distance on X-Y plane.\n"
"In current units."

#: flatcamGUI/ObjectUI.py:1416
msgid "<b>CNC Tools Table</b>"
msgstr "<b>CNC Tools Table</b>"

#: flatcamGUI/ObjectUI.py:1419
msgid ""
"Tools in this CNCJob object used for cutting.\n"
"The tool diameter is used for plotting on canvas.\n"
"The 'Offset' entry will set an offset for the cut.\n"
"'Offset' can be inside, outside, on path (none) and custom.\n"
"'Type' entry is only informative and it allow to know the \n"
"intent of using the current tool. \n"
"It can be Rough(ing), Finish(ing) or Iso(lation).\n"
"The 'Tool type'(TT) can be circular with 1 to 4 teeths(C1..C4),\n"
"ball(B), or V-Shaped(V)."
msgstr ""
"Tools in this CNCJob object used for cutting.\n"
"The tool diameter is used for plotting on canvas.\n"
"The 'Offset' entry will set an offset for the cut.\n"
"'Offset' can be inside, outside, on path (none) and custom.\n"
"'Type' entry is only informative and it allow to know the \n"
"intent of using the current tool. \n"
"It can be Rough(ing), Finish(ing) or Iso(lation).\n"
"The 'Tool type'(TT) can be circular with 1 to 4 teeths(C1..C4),\n"
"ball(B), or V-Shaped(V)."

#: flatcamGUI/ObjectUI.py:1453
msgid "P"
msgstr "P"

#: flatcamGUI/ObjectUI.py:1459
msgid "Update Plot"
msgstr "Update Plot"

#: flatcamGUI/ObjectUI.py:1461
msgid "Update the plot."
msgstr "Update the plot."

#: flatcamGUI/ObjectUI.py:1468
msgid "<b>Export CNC Code:</b>"
msgstr "<b>Export CNC Code:</b>"

#: flatcamGUI/ObjectUI.py:1476
msgid "Prepend to CNC Code:"
msgstr "Prepend to CNC Code:"

#: flatcamGUI/ObjectUI.py:1479
msgid ""
"Type here any G-Code commands you would\n"
"like to add to the beginning of the generated file."
msgstr ""
"Type here any G-Code commands you would\n"
"like to add to the beginning of the generated file."

#: flatcamGUI/ObjectUI.py:1489
msgid "Append to CNC Code"
msgstr "Append to CNC Code"

#: flatcamGUI/ObjectUI.py:1513
msgid ""
"Type here any G-Code commands you would\n"
"like to be executed when Toolchange event is encountered.\n"
"This will constitute a Custom Toolchange GCode,\n"
"or a Toolchange Macro.\n"
"The FlatCAM variables are surrounded by '%' symbol.\n"
"\n"
"WARNING: it can be used only with a postprocessor file\n"
"that has 'toolchange_custom' in it's name and this is built\n"
"having as template the 'Toolchange Custom' posprocessor file."
msgstr ""
"Type here any G-Code commands you would\n"
"like to be executed when Toolchange event is encountered.\n"
"This will constitute a Custom Toolchange GCode,\n"
"or a Toolchange Macro.\n"
"The FlatCAM variables are surrounded by '%' symbol.\n"
"\n"
"WARNING: it can be used only with a postprocessor file\n"
"that has 'toolchange_custom' in it's name and this is built\n"
"having as template the 'Toolchange Custom' posprocessor file."

#: flatcamGUI/ObjectUI.py:1561
msgid "z_cut = depth where to cut"
msgstr "z_cut = depth where to cut"

#: flatcamGUI/ObjectUI.py:1562
msgid "z_move = height where to travel"
msgstr "z_move = height where to travel"

#: flatcamGUI/ObjectUI.py:1580
msgid "View CNC Code"
msgstr "View CNC Code"

#: flatcamGUI/ObjectUI.py:1583
msgid ""
"Opens TAB to view/modify/print G-Code\n"
"file."
msgstr ""
"Opens TAB to view/modify/print G-Code\n"
"file."

#: flatcamGUI/ObjectUI.py:1589
msgid "Save CNC Code"
msgstr "Save CNC Code"

#: flatcamGUI/ObjectUI.py:1592
msgid ""
"Opens dialog to save G-Code\n"
"file."
msgstr ""
"Opens dialog to save G-Code\n"
"file."

#: flatcamTools/ToolCalculators.py:24
msgid "Calculators"
msgstr "Calculators"

#: flatcamTools/ToolCalculators.py:25
msgid "V-Shape Tool Calculator"
msgstr "V-Shape Tool Calculator"

#: flatcamTools/ToolCalculators.py:26
msgid "Units Calculator"
msgstr "Units Calculator"

#: flatcamTools/ToolCalculators.py:27
msgid "ElectroPlating Calculator"
msgstr "ElectroPlating Calculator"

#: flatcamTools/ToolCalculators.py:68
msgid "Here you enter the value to be converted from INCH to MM"
msgstr "Here you enter the value to be converted from INCH to MM"

#: flatcamTools/ToolCalculators.py:73
msgid "Here you enter the value to be converted from MM to INCH"
msgstr "Here you enter the value to be converted from MM to INCH"

#: flatcamTools/ToolCalculators.py:98
msgid ""
"This is the diameter of the tool tip.\n"
"The manufacturer specifies it."
msgstr ""
"This is the diameter of the tool tip.\n"
"The manufacturer specifies it."

#: flatcamTools/ToolCalculators.py:101
msgid "Tip Angle:"
msgstr "Tip Angle:"

#: flatcamTools/ToolCalculators.py:105
msgid ""
"This is the angle of the tip of the tool.\n"
"It is specified by manufacturer."
msgstr ""
"This is the angle of the tip of the tool.\n"
"It is specified by manufacturer."

#: flatcamTools/ToolCalculators.py:112
msgid ""
"This is the depth to cut into the material.\n"
"In the CNCJob is the CutZ parameter."
msgstr ""
"This is the depth to cut into the material.\n"
"In the CNCJob is the CutZ parameter."

#: flatcamTools/ToolCalculators.py:115
msgid "Tool Diameter:"
msgstr "Tool Diameter:"

#: flatcamTools/ToolCalculators.py:119
msgid ""
"This is the tool diameter to be entered into\n"
"FlatCAM Gerber section.\n"
"In the CNCJob section it is called >Tool dia<."
msgstr ""
"This is the tool diameter to be entered into\n"
"FlatCAM Gerber section.\n"
"In the CNCJob section it is called >Tool dia<."

#: flatcamTools/ToolCalculators.py:131 flatcamTools/ToolCalculators.py:214
msgid "Calculate"
msgstr "Calculate"

#: flatcamTools/ToolCalculators.py:134
msgid ""
"Calculate either the Cut Z or the effective tool diameter,\n"
"  depending on which is desired and which is known. "
msgstr ""
"Calculate either the Cut Z or the effective tool diameter,\n"
"  depending on which is desired and which is known. "

#: flatcamTools/ToolCalculators.py:190
msgid "Current Value:"
msgstr "Current Value:"

#: flatcamTools/ToolCalculators.py:194
msgid ""
"This is the current intensity value\n"
"to be set on the Power Supply. In Amps."
msgstr ""
"This is the current intensity value\n"
"to be set on the Power Supply. In Amps."

#: flatcamTools/ToolCalculators.py:198
msgid "Time:"
msgstr "Time:"

#: flatcamTools/ToolCalculators.py:202
msgid ""
"This is the calculated time required for the procedure.\n"
"In minutes."
msgstr ""
"This is the calculated time required for the procedure.\n"
"In minutes."

#: flatcamTools/ToolCalculators.py:217
msgid ""
"Calculate the current intensity value and the procedure time,\n"
"  depending on the parameters above"
msgstr ""
"Calculate the current intensity value and the procedure time,\n"
"  depending on the parameters above"

#: flatcamTools/ToolCutOut.py:17
msgid "Cutout PCB"
msgstr "Cutout PCB"

#: flatcamTools/ToolCutOut.py:53
msgid "Obj Type:"
msgstr "Obj Type:"

#: flatcamTools/ToolCutOut.py:55
msgid ""
"Specify the type of object to be cutout.\n"
"It can be of type: Gerber or Geometry.\n"
"What is selected here will dictate the kind\n"
"of objects that will populate the 'Object' combobox."
msgstr ""
"Specify the type of object to be cutout.\n"
"It can be of type: Gerber or Geometry.\n"
"What is selected here will dictate the kind\n"
"of objects that will populate the 'Object' combobox."

#: flatcamTools/ToolCutOut.py:69 flatcamTools/ToolPanelize.py:71
msgid "Object:"
msgstr "Object:"

#: flatcamTools/ToolCutOut.py:71
msgid "Object to be cutout.                        "
msgstr "Object to be cutout.                        "

#: flatcamTools/ToolCutOut.py:79
msgid ""
"Diameter of the tool used to cutout\n"
"the PCB shape out of the surrounding material."
msgstr ""
"Diameter of the tool used to cutout\n"
"the PCB shape out of the surrounding material."

#: flatcamTools/ToolCutOut.py:88
msgid ""
"Margin over bounds. A positive value here\n"
"will make the cutout of the PCB further from\n"
"the actual PCB border"
msgstr ""
"Margin over bounds. A positive value here\n"
"will make the cutout of the PCB further from\n"
"the actual PCB border"

#: flatcamTools/ToolCutOut.py:98
msgid ""
"The size of the bridge gaps in the cutout\n"
"used to keep the board connected to\n"
"the surrounding material (the one \n"
"from which the PCB is cutout)."
msgstr ""
"The size of the bridge gaps in the cutout\n"
"used to keep the board connected to\n"
"the surrounding material (the one \n"
"from which the PCB is cutout)."

#: flatcamTools/ToolCutOut.py:117
#| msgid "Create a convex shape surrounding the entire PCB."
msgid ""
"Create a convex shape surrounding the entire PCB.\n"
"Used only if the source object type is Gerber."
msgstr ""
"Create a convex shape surrounding the entire PCB.\n"
"Used only if the source object type is Gerber."

#: flatcamTools/ToolCutOut.py:123
msgid "A. Automatic Bridge Gaps"
msgstr "A. Automatic Bridge Gaps"

#: flatcamTools/ToolCutOut.py:125
msgid "This section handle creation of automatic bridge gaps."
msgstr "This section handle creation of automatic bridge gaps."

#: flatcamTools/ToolCutOut.py:136
msgid ""
"Number of gaps used for the Automatic cutout.\n"
"There can be maximum 8 bridges/gaps.\n"
"The choices are:\n"
"- lr    - left + right\n"
"- tb    - top + bottom\n"
"- 4     - left + right +top + bottom\n"
"- 2lr   - 2*left + 2*right\n"
"- 2tb  - 2*top + 2*bottom\n"
"- 8     - 2*left + 2*right +2*top + 2*bottom"
msgstr ""
"Number of gaps used for the Automatic cutout.\n"
"There can be maximum 8 bridges/gaps.\n"
"The choices are:\n"
"- lr    - left + right\n"
"- tb    - top + bottom\n"
"- 4     - left + right +top + bottom\n"
"- 2lr   - 2*left + 2*right\n"
"- 2tb  - 2*top + 2*bottom\n"
"- 8     - 2*left + 2*right +2*top + 2*bottom"

#: flatcamTools/ToolCutOut.py:159
msgid "FreeForm:"
msgstr "FreeForm:"

#: flatcamTools/ToolCutOut.py:161
msgid ""
"The cutout shape can be of ny shape.\n"
"Useful when the PCB has a non-rectangular shape."
msgstr ""
"The cutout shape can be of ny shape.\n"
"Useful when the PCB has a non-rectangular shape."

#: flatcamTools/ToolCutOut.py:170
msgid ""
"Cutout the selected object.\n"
"The cutout shape can be of any shape.\n"
"Useful when the PCB has a non-rectangular shape."
msgstr ""
"Cutout the selected object.\n"
"The cutout shape can be of any shape.\n"
"Useful when the PCB has a non-rectangular shape."

#: flatcamTools/ToolCutOut.py:179
msgid "Rectangular:"
msgstr "Rectangular:"

#: flatcamTools/ToolCutOut.py:181
msgid ""
"The resulting cutout shape is\n"
"always a rectangle shape and it will be\n"
"the bounding box of the Object."
msgstr ""
"The resulting cutout shape is\n"
"always a rectangle shape and it will be\n"
"the bounding box of the Object."

#: flatcamTools/ToolCutOut.py:190
msgid ""
"Cutout the selected object.\n"
"The resulting cutout shape is\n"
"always a rectangle shape and it will be\n"
"the bounding box of the Object."
msgstr ""
"Cutout the selected object.\n"
"The resulting cutout shape is\n"
"always a rectangle shape and it will be\n"
"the bounding box of the Object."

#: flatcamTools/ToolCutOut.py:198
msgid "B. Manual Bridge Gaps"
msgstr "B. Manual Bridge Gaps"

#: flatcamTools/ToolCutOut.py:200
msgid ""
"This section handle creation of manual bridge gaps.\n"
"This is done by mouse clicking on the perimeter of the\n"
"Geometry object that is used as a cutout object. "
msgstr ""
"This section handle creation of manual bridge gaps.\n"
"This is done by mouse clicking on the perimeter of the\n"
"Geometry object that is used as a cutout object. "

#: flatcamTools/ToolCutOut.py:216
msgid "Geo Obj:"
msgstr "Geo Obj:"

#: flatcamTools/ToolCutOut.py:218
msgid "Geometry object used to create the manual cutout."
msgstr "Geometry object used to create the manual cutout."

#: flatcamTools/ToolCutOut.py:229
msgid "Manual Geo:"
msgstr "Manual Geo:"

#: flatcamTools/ToolCutOut.py:231 flatcamTools/ToolCutOut.py:241
msgid ""
"If the object to be cutout is a Gerber\n"
"first create a Geometry that surrounds it,\n"
"to be used as the cutout, if one doesn't exist yet.\n"
"Select the source Gerber file in the top object combobox."
msgstr ""
"If the object to be cutout is a Gerber\n"
"first create a Geometry that surrounds it,\n"
"to be used as the cutout, if one doesn't exist yet.\n"
"Select the source Gerber file in the top object combobox."

#: flatcamTools/ToolCutOut.py:251
msgid "Manual Add Bridge Gaps:"
msgstr "Manual Add Bridge Gaps:"

#: flatcamTools/ToolCutOut.py:253
msgid ""
"Use the left mouse button (LMB) click\n"
"to create a bridge gap to separate the PCB from\n"
"the surrounding material."
msgstr ""
"Use the left mouse button (LMB) click\n"
"to create a bridge gap to separate the PCB from\n"
"the surrounding material."

#: flatcamTools/ToolCutOut.py:260
msgid "Generate Gap"
msgstr "Generate Gap"

#: flatcamTools/ToolCutOut.py:262
msgid ""
"Use the left mouse button (LMB) click\n"
"to create a bridge gap to separate the PCB from\n"
"the surrounding material.\n"
"The LMB click has to be done on the perimeter of\n"
"the Geometry object used as a cutout geometry."
msgstr ""
"Use the left mouse button (LMB) click\n"
"to create a bridge gap to separate the PCB from\n"
"the surrounding material.\n"
"The LMB click has to be done on the perimeter of\n"
"the Geometry object used as a cutout geometry."

#: flatcamTools/ToolCutOut.py:341 flatcamTools/ToolCutOut.py:499
#: flatcamTools/ToolNonCopperClear.py:666 flatcamTools/ToolPaint.py:764
#: flatcamTools/ToolPanelize.py:352 flatcamTools/ToolPanelize.py:366
#: flatcamTools/ToolSub.py:237 flatcamTools/ToolSub.py:249
#: flatcamTools/ToolSub.py:428 flatcamTools/ToolSub.py:440
#, python-format
msgid "[ERROR_NOTCL] Could not retrieve object: %s"
msgstr "[ERROR_NOTCL] Could not retrieve object: %s"

#: flatcamTools/ToolCutOut.py:345
msgid ""
"[ERROR_NOTCL] There is no object selected for Cutout.\n"
"Select one and try again."
msgstr ""
"[ERROR_NOTCL] There is no object selected for Cutout.\n"
"Select one and try again."

#: flatcamTools/ToolCutOut.py:360
msgid ""
"[WARNING_NOTCL] Tool Diameter is zero value. Change it to a positive real "
"number."
msgstr ""
"[WARNING_NOTCL] Tool Diameter is zero value. Change it to a positive real "
"number."

#: flatcamTools/ToolCutOut.py:370 flatcamTools/ToolCutOut.py:527
#: flatcamTools/ToolCutOut.py:771
msgid ""
"[WARNING_NOTCL] Margin value is missing or wrong format. Add it and retry."
msgstr ""
"[WARNING_NOTCL] Margin value is missing or wrong format. Add it and retry."

#: flatcamTools/ToolCutOut.py:381 flatcamTools/ToolCutOut.py:538
#: flatcamTools/ToolCutOut.py:666
msgid ""
"[WARNING_NOTCL] Gap size value is missing or wrong format. Add it and retry."
msgstr ""
"[WARNING_NOTCL] Gap size value is missing or wrong format. Add it and retry."

#: flatcamTools/ToolCutOut.py:388 flatcamTools/ToolCutOut.py:545
msgid "[WARNING_NOTCL] Number of gaps value is missing. Add it and retry."
msgstr "[WARNING_NOTCL] Number of gaps value is missing. Add it and retry."

#: flatcamTools/ToolCutOut.py:392 flatcamTools/ToolCutOut.py:549
msgid ""
"[WARNING_NOTCL] Gaps value can be only one of: 'lr', 'tb', '2lr', '2tb', 4 "
"or 8. Fill in a correct value and retry. "
msgstr ""
"[WARNING_NOTCL] Gaps value can be only one of: 'lr', 'tb', '2lr', '2tb', 4 "
"or 8. Fill in a correct value and retry. "

#: flatcamTools/ToolCutOut.py:397 flatcamTools/ToolCutOut.py:554
msgid ""
"[ERROR]Cutout operation cannot be done on a multi-geo Geometry.\n"
"Optionally, this Multi-geo Geometry can be converted to Single-geo "
"Geometry,\n"
"and after that perform Cutout."
msgstr ""
"[ERROR]Cutout operation cannot be done on a multi-geo Geometry.\n"
"Optionally, this Multi-geo Geometry can be converted to Single-geo "
"Geometry,\n"
"and after that perform Cutout."

#: flatcamTools/ToolCutOut.py:483 flatcamTools/ToolCutOut.py:636
msgid "[success] Any form CutOut operation finished."
msgstr "[success] Any form CutOut operation finished."

#: flatcamTools/ToolCutOut.py:503 flatcamTools/ToolPaint.py:768
#: flatcamTools/ToolPanelize.py:358
#, python-format
msgid "[ERROR_NOTCL] Object not found: %s"
msgstr "[ERROR_NOTCL] Object not found: %s"

#: flatcamTools/ToolCutOut.py:517 flatcamTools/ToolCutOut.py:656
#: flatcamTools/ToolCutOut.py:761
msgid ""
"[ERROR_NOTCL] Tool Diameter is zero value. Change it to a positive real "
"number."
msgstr ""
"[ERROR_NOTCL] Tool Diameter is zero value. Change it to a positive real "
"number."

#: flatcamTools/ToolCutOut.py:641
msgid ""
"Click on the selected geometry object perimeter to create a bridge gap ..."
msgstr ""
"Click on the selected geometry object perimeter to create a bridge gap ..."

#: flatcamTools/ToolCutOut.py:682
msgid "Making manual bridge gap..."
msgstr "Making manual bridge gap..."

#: flatcamTools/ToolCutOut.py:705
#, python-format
msgid "[ERROR_NOTCL] Could not retrieve Geometry object: %s"
msgstr "[ERROR_NOTCL] Could not retrieve Geometry object: %s"

#: flatcamTools/ToolCutOut.py:709
#, python-format
msgid "[ERROR_NOTCL] Geometry object for manual cutout not found: %s"
msgstr "[ERROR_NOTCL] Geometry object for manual cutout not found: %s"

#: flatcamTools/ToolCutOut.py:719
msgid "[success] Added manual Bridge Gap."
msgstr "[success] Added manual Bridge Gap."

#: flatcamTools/ToolCutOut.py:736
#, python-format
msgid "[ERROR_NOTCL] Could not retrieve Gerber object: %s"
msgstr "[ERROR_NOTCL] Could not retrieve Gerber object: %s"

#: flatcamTools/ToolCutOut.py:740
msgid ""
"[ERROR_NOTCL] There is no Gerber object selected for Cutout.\n"
"Select one and try again."
msgstr ""
"[ERROR_NOTCL] There is no Gerber object selected for Cutout.\n"
"Select one and try again."

#: flatcamTools/ToolCutOut.py:745
msgid ""
"[ERROR_NOTCL] The selected object has to be of Gerber type.\n"
"Select a Gerber file and try again."
msgstr ""
"[ERROR_NOTCL] The selected object has to be of Gerber type.\n"
"Select a Gerber file and try again."

#: flatcamTools/ToolDblSided.py:18
msgid "2-Sided PCB"
msgstr "2-Sided PCB"

#: flatcamTools/ToolDblSided.py:52 flatcamTools/ToolDblSided.py:76
#: flatcamTools/ToolDblSided.py:100
msgid "Mirror"
msgstr "Mirror"

#: flatcamTools/ToolDblSided.py:54 flatcamTools/ToolDblSided.py:78
#: flatcamTools/ToolDblSided.py:102
msgid ""
"Mirrors (flips) the specified object around \n"
"the specified axis. Does not create a new \n"
"object, but modifies it."
msgstr ""
"Mirrors (flips) the specified object around \n"
"the specified axis. Does not create a new \n"
"object, but modifies it."

#: flatcamTools/ToolDblSided.py:73
msgid "Excellon Object to be mirrored."
msgstr "Excellon Object to be mirrored."

#: flatcamTools/ToolDblSided.py:97
msgid "Geometry Obj to be mirrored."
msgstr "Geometry Obj to be mirrored."

#: flatcamTools/ToolDblSided.py:135
msgid ""
"The axis should pass through a <b>point</b> or cut\n"
" a specified <b>box</b> (in a FlatCAM object) through \n"
"the center."
msgstr ""
"The axis should pass through a <b>point</b> or cut\n"
" a specified <b>box</b> (in a FlatCAM object) through \n"
"the center."

#: flatcamTools/ToolDblSided.py:152
msgid "Point/Box Reference:"
msgstr "Point/Box Reference:"

#: flatcamTools/ToolDblSided.py:154
msgid ""
"If 'Point' is selected above it store the coordinates (x, y) through which\n"
"the mirroring axis passes.\n"
"If 'Box' is selected above, select here a FlatCAM object (Gerber, Exc or "
"Geo).\n"
"Through the center of this object pass the mirroring axis selected above."
msgstr ""
"If 'Point' is selected above it store the coordinates (x, y) through which\n"
"the mirroring axis passes.\n"
"If 'Box' is selected above, select here a FlatCAM object (Gerber, Exc or "
"Geo).\n"
"Through the center of this object pass the mirroring axis selected above."

#: flatcamTools/ToolDblSided.py:162
msgid ""
"Add the coordinates in format <b>(x, y)</b> through which the mirroring "
"axis \n"
" selected in 'MIRROR AXIS' pass.\n"
"The (x, y) coordinates are captured by pressing SHIFT key\n"
"and left mouse button click on canvas or you can enter the coords manually."
msgstr ""
"Add the coordinates in format <b>(x, y)</b> through which the mirroring "
"axis \n"
" selected in 'MIRROR AXIS' pass.\n"
"The (x, y) coordinates are captured by pressing SHIFT key\n"
"and left mouse button click on canvas or you can enter the coords manually."

#: flatcamTools/ToolDblSided.py:182
msgid "Gerber   Reference Box Object"
msgstr "Gerber   Reference Box Object"

#: flatcamTools/ToolDblSided.py:183
msgid "Excellon Reference Box Object"
msgstr "Excellon Reference Box Object"

#: flatcamTools/ToolDblSided.py:184
msgid "Geometry Reference Box Object"
msgstr "Geometry Reference Box Object"

#: flatcamTools/ToolDblSided.py:193
msgid "Alignment Drill Coordinates:"
msgstr "Alignment Drill Coordinates:"

#: flatcamTools/ToolDblSided.py:195
msgid ""
"Alignment holes (x1, y1), (x2, y2), ... on one side of the mirror axis. For "
"each set of (x, y) coordinates\n"
"entered here, a pair of drills will be created:\n"
"\n"
"- one drill at the coordinates from the field\n"
"- one drill in mirror position over the axis selected above in the 'Mirror "
"Axis'."
msgstr ""
"Alignment holes (x1, y1), (x2, y2), ... on one side of the mirror axis. For "
"each set of (x, y) coordinates\n"
"entered here, a pair of drills will be created:\n"
"\n"
"- one drill at the coordinates from the field\n"
"- one drill in mirror position over the axis selected above in the 'Mirror "
"Axis'."

#: flatcamTools/ToolDblSided.py:210
msgid ""
"Add alignment drill holes coords in the format: (x1, y1), (x2, y2), ... \n"
"on one side of the mirror axis.\n"
"\n"
"The coordinates set can be obtained:\n"
"- press SHIFT key and left mouse clicking on canvas. Then click Add.\n"
"- press SHIFT key and left mouse clicking on canvas. Then CTRL+V in the "
"field.\n"
"- press SHIFT key and left mouse clicking on canvas. Then RMB click in the "
"field and click Paste.\n"
"- by entering the coords manually in the format: (x1, y1), (x2, y2), ..."
msgstr ""
"Add alignment drill holes coords in the format: (x1, y1), (x2, y2), ... \n"
"on one side of the mirror axis.\n"
"\n"
"The coordinates set can be obtained:\n"
"- press SHIFT key and left mouse clicking on canvas. Then click Add.\n"
"- press SHIFT key and left mouse clicking on canvas. Then CTRL+V in the "
"field.\n"
"- press SHIFT key and left mouse clicking on canvas. Then RMB click in the "
"field and click Paste.\n"
"- by entering the coords manually in the format: (x1, y1), (x2, y2), ..."

#: flatcamTools/ToolDblSided.py:224
msgid "Alignment Drill Diameter"
msgstr "Alignment Drill Diameter"

#: flatcamTools/ToolDblSided.py:247
msgid "Create Excellon Object"
msgstr "Create Excellon Object"

#: flatcamTools/ToolDblSided.py:249
msgid ""
"Creates an Excellon Object containing the\n"
"specified alignment holes and their mirror\n"
"images."
msgstr ""
"Creates an Excellon Object containing the\n"
"specified alignment holes and their mirror\n"
"images."

#: flatcamTools/ToolDblSided.py:255
msgid "Reset"
msgstr "Reset"

#: flatcamTools/ToolDblSided.py:257
msgid "Resets all the fields."
msgstr "Resets all the fields."

#: flatcamTools/ToolDblSided.py:302
msgid "2-Sided Tool"
msgstr "2-Sided Tool"

#: flatcamTools/ToolDblSided.py:327
msgid ""
"[WARNING_NOTCL] 'Point' reference is selected and 'Point' coordinates are "
"missing. Add them and retry."
msgstr ""
"[WARNING_NOTCL] 'Point' reference is selected and 'Point' coordinates are "
"missing. Add them and retry."

#: flatcamTools/ToolDblSided.py:346
msgid ""
"[WARNING_NOTCL] There is no Box reference object loaded. Load one and retry."
msgstr ""
"[WARNING_NOTCL] There is no Box reference object loaded. Load one and retry."

#: flatcamTools/ToolDblSided.py:368
msgid ""
"[WARNING_NOTCL] No value or wrong format in Drill Dia entry. Add it and "
"retry."
msgstr ""
"[WARNING_NOTCL] No value or wrong format in Drill Dia entry. Add it and "
"retry."

#: flatcamTools/ToolDblSided.py:375
msgid ""
"[WARNING_NOTCL] There are no Alignment Drill Coordinates to use. Add them "
"and retry."
msgstr ""
"[WARNING_NOTCL] There are no Alignment Drill Coordinates to use. Add them "
"and retry."

#: flatcamTools/ToolDblSided.py:397
msgid "[success] Excellon object with alignment drills created..."
msgstr "[success] Excellon object with alignment drills created..."

#: flatcamTools/ToolDblSided.py:406
msgid "[WARNING_NOTCL] There is no Gerber object loaded ..."
msgstr "[WARNING_NOTCL] There is no Gerber object loaded ..."

#: flatcamTools/ToolDblSided.py:410 flatcamTools/ToolDblSided.py:453
#: flatcamTools/ToolDblSided.py:497
msgid ""
"[ERROR_NOTCL] Only Gerber, Excellon and Geometry objects can be mirrored."
msgstr ""
"[ERROR_NOTCL] Only Gerber, Excellon and Geometry objects can be mirrored."

#: flatcamTools/ToolDblSided.py:420
msgid ""
"[WARNING_NOTCL] 'Point' coordinates missing. Using Origin (0, 0) as "
"mirroring reference."
msgstr ""
"[WARNING_NOTCL] 'Point' coordinates missing. Using Origin (0, 0) as "
"mirroring reference."

#: flatcamTools/ToolDblSided.py:430 flatcamTools/ToolDblSided.py:474
#: flatcamTools/ToolDblSided.py:511
msgid "[WARNING_NOTCL] There is no Box object loaded ..."
msgstr "[WARNING_NOTCL] There is no Box object loaded ..."

#: flatcamTools/ToolDblSided.py:440
#, python-format
msgid "[success] Gerber %s was mirrored..."
msgstr "[success] Gerber %s was mirrored..."

#: flatcamTools/ToolDblSided.py:449
msgid "[WARNING_NOTCL] There is no Excellon object loaded ..."
msgstr "[WARNING_NOTCL] There is no Excellon object loaded ..."

#: flatcamTools/ToolDblSided.py:464
msgid ""
"[WARNING_NOTCL] There are no Point coordinates in the Point field. Add "
"coords and try again ..."
msgstr ""
"[WARNING_NOTCL] There are no Point coordinates in the Point field. Add "
"coords and try again ..."

#: flatcamTools/ToolDblSided.py:484
#, python-format
msgid "[success] Excellon %s was mirrored..."
msgstr "[success] Excellon %s was mirrored..."

#: flatcamTools/ToolDblSided.py:493
msgid "[WARNING_NOTCL] There is no Geometry object loaded ..."
msgstr "[WARNING_NOTCL] There is no Geometry object loaded ..."

#: flatcamTools/ToolDblSided.py:521
#, python-format
msgid "[success] Geometry %s was mirrored..."
msgstr "[success] Geometry %s was mirrored..."

#: flatcamTools/ToolFilm.py:25
msgid "Film PCB"
msgstr "Film PCB"

#: flatcamTools/ToolFilm.py:56 flatcamTools/ToolImage.py:53
#: flatcamTools/ToolPanelize.py:56
msgid "Object Type:"
msgstr "Object Type:"

#: flatcamTools/ToolFilm.py:58
msgid ""
"Specify the type of object for which to create the film.\n"
"The object can be of type: Gerber or Geometry.\n"
"The selection here decide the type of objects that will be\n"
"in the Film Object combobox."
msgstr ""
"Specify the type of object for which to create the film.\n"
"The object can be of type: Gerber or Geometry.\n"
"The selection here decide the type of objects that will be\n"
"in the Film Object combobox."

#: flatcamTools/ToolFilm.py:71
msgid "Film Object:"
msgstr "Film Object:"

#: flatcamTools/ToolFilm.py:73
msgid "Object for which to create the film."
msgstr "Object for which to create the film."

#: flatcamTools/ToolFilm.py:89 flatcamTools/ToolPanelize.py:111
msgid "Box Type:"
msgstr "Box Type:"

#: flatcamTools/ToolFilm.py:91
msgid ""
"Specify the type of object to be used as an container for\n"
"film creation. It can be: Gerber or Geometry type.The selection here decide "
"the type of objects that will be\n"
"in the Box Object combobox."
msgstr ""
"Specify the type of object to be used as an container for\n"
"film creation. It can be: Gerber or Geometry type.The selection here decide "
"the type of objects that will be\n"
"in the Box Object combobox."

#: flatcamTools/ToolFilm.py:104 flatcamTools/ToolPanelize.py:126
msgid "Box Object:"
msgstr "Box Object:"

#: flatcamTools/ToolFilm.py:106
msgid ""
"The actual object that is used a container for the\n"
" selected object for which we create the film.\n"
"Usually it is the PCB outline but it can be also the\n"
"same object for which the film is created."
msgstr ""
"The actual object that is used a container for the\n"
" selected object for which we create the film.\n"
"Usually it is the PCB outline but it can be also the\n"
"same object for which the film is created."

#: flatcamTools/ToolFilm.py:157
msgid "Save Film"
msgstr "Save Film"

#: flatcamTools/ToolFilm.py:159
msgid ""
"Create a Film for the selected object, within\n"
"the specified box. Does not create a new \n"
" FlatCAM object, but directly save it in SVG format\n"
"which can be opened with Inkscape."
msgstr ""
"Create a Film for the selected object, within\n"
"the specified box. Does not create a new \n"
" FlatCAM object, but directly save it in SVG format\n"
"which can be opened with Inkscape."

#: flatcamTools/ToolFilm.py:225
msgid ""
"[ERROR_NOTCL] No FlatCAM object selected. Load an object for Film and retry."
msgstr ""
"[ERROR_NOTCL] No FlatCAM object selected. Load an object for Film and retry."

#: flatcamTools/ToolFilm.py:231
msgid ""
"[ERROR_NOTCL] No FlatCAM object selected. Load an object for Box and retry."
msgstr ""
"[ERROR_NOTCL] No FlatCAM object selected. Load an object for Box and retry."

#: flatcamTools/ToolFilm.py:255
msgid "Generating Film ..."
msgstr "Generating Film ..."

#: flatcamTools/ToolFilm.py:260 flatcamTools/ToolFilm.py:264
msgid "Export SVG positive"
msgstr "Export SVG positive"

#: flatcamTools/ToolFilm.py:269
msgid "[WARNING_NOTCL] Export SVG positive cancelled."
msgstr "[WARNING_NOTCL] Export SVG positive cancelled."

#: flatcamTools/ToolFilm.py:276 flatcamTools/ToolFilm.py:280
msgid "Export SVG negative"
msgstr "Export SVG negative"

#: flatcamTools/ToolFilm.py:285
msgid "[WARNING_NOTCL] Export SVG negative cancelled."
msgstr "[WARNING_NOTCL] Export SVG negative cancelled."

#: flatcamTools/ToolImage.py:25
msgid "Image as Object"
msgstr "Image as Object"

#: flatcamTools/ToolImage.py:31
msgid "Image to PCB"
msgstr "Image to PCB"

#: flatcamTools/ToolImage.py:55
msgid ""
"Specify the type of object to create from the image.\n"
"It can be of type: Gerber or Geometry."
msgstr ""
"Specify the type of object to create from the image.\n"
"It can be of type: Gerber or Geometry."

#: flatcamTools/ToolImage.py:63
msgid "DPI value:"
msgstr "DPI value:"

#: flatcamTools/ToolImage.py:65
msgid "Specify a DPI value for the image."
msgstr "Specify a DPI value for the image."

#: flatcamTools/ToolImage.py:72
msgid "Level of detail"
msgstr "Level of detail"

#: flatcamTools/ToolImage.py:81
msgid "Image type"
msgstr "Image type"

#: flatcamTools/ToolImage.py:83
msgid ""
"Choose a method for the image interpretation.\n"
"B/W means a black & white image. Color means a colored image."
msgstr ""
"Choose a method for the image interpretation.\n"
"B/W means a black & white image. Color means a colored image."

#: flatcamTools/ToolImage.py:90 flatcamTools/ToolImage.py:103
#: flatcamTools/ToolImage.py:114 flatcamTools/ToolImage.py:125
msgid "Mask value"
msgstr "Mask value"

#: flatcamTools/ToolImage.py:92
msgid ""
"Mask for monochrome image.\n"
"Takes values between [0 ... 255].\n"
"Decides the level of details to include\n"
"in the resulting geometry.\n"
"0 means no detail and 255 means everything \n"
"(which is totally black)."
msgstr ""
"Mask for monochrome image.\n"
"Takes values between [0 ... 255].\n"
"Decides the level of details to include\n"
"in the resulting geometry.\n"
"0 means no detail and 255 means everything \n"
"(which is totally black)."

#: flatcamTools/ToolImage.py:105
msgid ""
"Mask for RED color.\n"
"Takes values between [0 ... 255].\n"
"Decides the level of details to include\n"
"in the resulting geometry."
msgstr ""
"Mask for RED color.\n"
"Takes values between [0 ... 255].\n"
"Decides the level of details to include\n"
"in the resulting geometry."

#: flatcamTools/ToolImage.py:116
msgid ""
"Mask for GREEN color.\n"
"Takes values between [0 ... 255].\n"
"Decides the level of details to include\n"
"in the resulting geometry."
msgstr ""
"Mask for GREEN color.\n"
"Takes values between [0 ... 255].\n"
"Decides the level of details to include\n"
"in the resulting geometry."

#: flatcamTools/ToolImage.py:127
msgid ""
"Mask for BLUE color.\n"
"Takes values between [0 ... 255].\n"
"Decides the level of details to include\n"
"in the resulting geometry."
msgstr ""
"Mask for BLUE color.\n"
"Takes values between [0 ... 255].\n"
"Decides the level of details to include\n"
"in the resulting geometry."

#: flatcamTools/ToolImage.py:139
msgid "Import image"
msgstr "Import image"

#: flatcamTools/ToolImage.py:141
msgid "Open a image of raster type and then import it in FlatCAM."
msgstr "Open a image of raster type and then import it in FlatCAM."

#: flatcamTools/ToolImage.py:170
msgid "Image Tool"
msgstr "Image Tool"

#: flatcamTools/ToolImage.py:200 flatcamTools/ToolImage.py:203
msgid "Import IMAGE"
msgstr "Import IMAGE"

#: flatcamTools/ToolMeasurement.py:26
msgid "Measurement"
msgstr "Measurement"

#: flatcamTools/ToolMeasurement.py:44
msgid "Units:"
msgstr "Units:"

#: flatcamTools/ToolMeasurement.py:45
msgid "Those are the units in which the distance is measured."
msgstr "Those are the units in which the distance is measured."

#: flatcamTools/ToolMeasurement.py:49
msgid "Start"
msgstr "Start"

#: flatcamTools/ToolMeasurement.py:49 flatcamTools/ToolMeasurement.py:52
msgid "Coords"
msgstr "Coords"

#: flatcamTools/ToolMeasurement.py:50 flatcamTools/ToolMeasurement.py:66
msgid "This is measuring Start point coordinates."
msgstr "This is measuring Start point coordinates."

#: flatcamTools/ToolMeasurement.py:52
msgid "Stop"
msgstr "Stop"

#: flatcamTools/ToolMeasurement.py:53 flatcamTools/ToolMeasurement.py:70
msgid "This is the measuring Stop point coordinates."
msgstr "This is the measuring Stop point coordinates."

#: flatcamTools/ToolMeasurement.py:56 flatcamTools/ToolMeasurement.py:74
msgid "This is the distance measured over the X axis."
msgstr "This is the distance measured over the X axis."

#: flatcamTools/ToolMeasurement.py:59 flatcamTools/ToolMeasurement.py:79
msgid "This is the distance measured over the Y axis."
msgstr "This is the distance measured over the Y axis."

#: flatcamTools/ToolMeasurement.py:61
msgid "DISTANCE"
msgstr "DISTANCE"

#: flatcamTools/ToolMeasurement.py:62 flatcamTools/ToolMeasurement.py:84
msgid "This is the point to point Euclidian distance."
msgstr "This is the point to point Euclidian distance."

#: flatcamTools/ToolMeasurement.py:86
msgid "Measure"
msgstr "Measure"

#: flatcamTools/ToolMeasurement.py:132
msgid "Meas. Tool"
msgstr "Meas. Tool"

#: flatcamTools/ToolMeasurement.py:177
msgid "MEASURING: Click on the Start point ..."
msgstr "MEASURING: Click on the Start point ..."

#: flatcamTools/ToolMeasurement.py:270
msgid "MEASURING: Click on the Destination point ..."
msgstr "MEASURING: Click on the Destination point ..."

#: flatcamTools/ToolMeasurement.py:278
#, python-brace-format
msgid "MEASURING: Result D(x) = {d_x} | D(y) = {d_y} | Distance = {d_z}"
msgstr "MEASURING: Result D(x) = {d_x} | D(y) = {d_y} | Distance = {d_z}"

#: flatcamTools/ToolMove.py:81
msgid "MOVE: Click on the Start point ..."
msgstr "MOVE: Click on the Start point ..."

#: flatcamTools/ToolMove.py:88
msgid "[WARNING_NOTCL] MOVE action cancelled. No object(s) to move."
msgstr "[WARNING_NOTCL] MOVE action cancelled. No object(s) to move."

#: flatcamTools/ToolMove.py:110
msgid "MOVE: Click on the Destination point ..."
msgstr "MOVE: Click on the Destination point ..."

#: flatcamTools/ToolMove.py:128
msgid "Moving ..."
msgstr "Moving ..."

#: flatcamTools/ToolMove.py:135
msgid "[WARNING_NOTCL] No object(s) selected."
msgstr "[WARNING_NOTCL] No object(s) selected."

#: flatcamTools/ToolMove.py:158
#, python-format
msgid "[ERROR_NOTCL] ToolMove.on_left_click() --> %s"
msgstr "[ERROR_NOTCL] ToolMove.on_left_click() --> %s"

#: flatcamTools/ToolMove.py:164
#, python-format
msgid "[success] %s object was moved ..."
msgstr "[success] %s object was moved ..."

#: flatcamTools/ToolMove.py:174
msgid "[ERROR_NOTCL] ToolMove.on_left_click() --> Error when mouse left click."
msgstr ""
"[ERROR_NOTCL] ToolMove.on_left_click() --> Error when mouse left click."

#: flatcamTools/ToolMove.py:202
msgid "[WARNING_NOTCL] Move action cancelled."
msgstr "[WARNING_NOTCL] Move action cancelled."

#: flatcamTools/ToolMove.py:214
msgid "[WARNING_NOTCL] Object(s) not selected"
msgstr "[WARNING_NOTCL] Object(s) not selected"

#: flatcamTools/ToolNonCopperClear.py:26
msgid "Non-Copper Clearing"
msgstr "Non-Copper Clearing"

#: flatcamTools/ToolNonCopperClear.py:64
msgid "Gerber object to be cleared of excess copper.                        "
msgstr "Gerber object to be cleared of excess copper.                        "

#: flatcamTools/ToolNonCopperClear.py:74
msgid ""
"Tools pool from which the algorithm\n"
"will pick the ones used for copper clearing."
msgstr ""
"Tools pool from which the algorithm\n"
"will pick the ones used for copper clearing."

#: flatcamTools/ToolNonCopperClear.py:89
msgid ""
"This is the Tool Number.\n"
"Non copper clearing will start with the tool with the biggest \n"
"diameter, continuing until there are no more tools.\n"
"Only tools that create NCC clearing geometry will still be present\n"
"in the resulting geometry. This is because with some tools\n"
"this function will not be able to create painting geometry."
msgstr ""
"This is the Tool Number.\n"
"Non copper clearing will start with the tool with the biggest \n"
"diameter, continuing until there are no more tools.\n"
"Only tools that create NCC clearing geometry will still be present\n"
"in the resulting geometry. This is because with some tools\n"
"this function will not be able to create painting geometry."

#: flatcamTools/ToolNonCopperClear.py:101 flatcamTools/ToolPaint.py:98
msgid ""
"The Tool Type (TT) can be:<BR>- <B>Circular</B> with 1 ... 4 teeth -> it is "
"informative only. Being circular, <BR>the cut width in material is exactly "
"the tool diameter.<BR>- <B>Ball</B> -> informative only and make reference "
"to the Ball type endmill.<BR>- <B>V-Shape</B> -> it will disable de Z-Cut "
"parameter in the resulting geometry UI form and enable two additional UI "
"form fields in the resulting geometry: V-Tip Dia and V-Tip Angle. Adjusting "
"those two values will adjust the Z-Cut parameter such as the cut width into "
"material will be equal with the value in the Tool Diameter column of this "
"table.<BR>Choosing the <B>V-Shape</B> Tool Type automatically will select "
"the Operation Type in the resulting geometry as Isolation."
msgstr ""
"The Tool Type (TT) can be:<BR>- <B>Circular</B> with 1 ... 4 teeth -> it is "
"informative only. Being circular, <BR>the cut width in material is exactly "
"the tool diameter.<BR>- <B>Ball</B> -> informative only and make reference "
"to the Ball type endmill.<BR>- <B>V-Shape</B> -> it will disable de Z-Cut "
"parameter in the resulting geometry UI form and enable two additional UI "
"form fields in the resulting geometry: V-Tip Dia and V-Tip Angle. Adjusting "
"those two values will adjust the Z-Cut parameter such as the cut width into "
"material will be equal with the value in the Tool Diameter column of this "
"table.<BR>Choosing the <B>V-Shape</B> Tool Type automatically will select "
"the Operation Type in the resulting geometry as Isolation."

#: flatcamTools/ToolNonCopperClear.py:120 flatcamTools/ToolPaint.py:117
msgid "Tool Dia"
msgstr "Tool Dia"

#: flatcamTools/ToolNonCopperClear.py:122
msgid "Diameter for the new tool to add in the Tool Table"
msgstr "Diameter for the new tool to add in the Tool Table"

#: flatcamTools/ToolNonCopperClear.py:148 flatcamTools/ToolPaint.py:145
#: flatcamTools/ToolSolderPaste.py:123
msgid ""
"Delete a selection of tools in the Tool Table\n"
"by first selecting a row(s) in the Tool Table."
msgstr ""
"Delete a selection of tools in the Tool Table\n"
"by first selecting a row(s) in the Tool Table."

#: flatcamTools/ToolNonCopperClear.py:226
msgid ""
"If checked, use 'rest machining'.\n"
"Basically it will clear copper outside PCB features,\n"
"using the biggest tool and continue with the next tools,\n"
"from bigger to smaller, to clear areas of copper that\n"
"could not be cleared by previous tool, until there is\n"
"no more copper to clear or there are no more tools.\n"
"If not checked, use the standard algorithm."
msgstr ""
"If checked, use 'rest machining'.\n"
"Basically it will clear copper outside PCB features,\n"
"using the biggest tool and continue with the next tools,\n"
"from bigger to smaller, to clear areas of copper that\n"
"could not be cleared by previous tool, until there is\n"
"no more copper to clear or there are no more tools.\n"
"If not checked, use the standard algorithm."

#: flatcamTools/ToolNonCopperClear.py:238
msgid "Generate Geometry"
msgstr "Generate Geometry"

#: flatcamTools/ToolNonCopperClear.py:485 flatcamTools/ToolPaint.py:544
#: flatcamTools/ToolSolderPaste.py:761
msgid "[WARNING_NOTCL] Please enter a tool diameter to add, in Float format."
msgstr "[WARNING_NOTCL] Please enter a tool diameter to add, in Float format."

#: flatcamTools/ToolNonCopperClear.py:513 flatcamTools/ToolPaint.py:568
msgid "[WARNING_NOTCL] Adding tool cancelled. Tool already in Tool Table."
msgstr "[WARNING_NOTCL] Adding tool cancelled. Tool already in Tool Table."

#: flatcamTools/ToolNonCopperClear.py:518 flatcamTools/ToolPaint.py:573
msgid "[success] New tool added to Tool Table."
msgstr "[success] New tool added to Tool Table."

#: flatcamTools/ToolNonCopperClear.py:560 flatcamTools/ToolPaint.py:616
msgid "[success] Tool from Tool Table was edited."
msgstr "[success] Tool from Tool Table was edited."

#: flatcamTools/ToolNonCopperClear.py:571 flatcamTools/ToolPaint.py:627
#: flatcamTools/ToolSolderPaste.py:847
msgid ""
"[WARNING_NOTCL] Edit cancelled. New diameter value is already in the Tool "
"Table."
msgstr ""
"[WARNING_NOTCL] Edit cancelled. New diameter value is already in the Tool "
"Table."

#: flatcamTools/ToolNonCopperClear.py:610 flatcamTools/ToolPaint.py:724
msgid "[WARNING_NOTCL] Delete failed. Select a tool to delete."
msgstr "[WARNING_NOTCL] Delete failed. Select a tool to delete."

#: flatcamTools/ToolNonCopperClear.py:615 flatcamTools/ToolPaint.py:729
msgid "[success] Tool(s) deleted from Tool Table."
msgstr "[success] Tool(s) deleted from Tool Table."

#: flatcamTools/ToolNonCopperClear.py:633 flatcamTools/ToolPaint.py:748
msgid ""
"[ERROR_NOTCL] Overlap value must be between 0 (inclusive) and 1 (exclusive), "
msgstr ""
"[ERROR_NOTCL] Overlap value must be between 0 (inclusive) and 1 (exclusive), "

#: flatcamTools/ToolNonCopperClear.py:673
msgid "[ERROR_NOTCL] No Gerber file available."
msgstr "[ERROR_NOTCL] No Gerber file available."

#: flatcamTools/ToolNonCopperClear.py:711
#: flatcamTools/ToolNonCopperClear.py:833
msgid "Clearing Non-Copper areas."
msgstr "Clearing Non-Copper areas."

#: flatcamTools/ToolNonCopperClear.py:729
#, python-format
msgid "[success] Non-Copper Clearing with ToolDia = %s started."
msgstr "[success] Non-Copper Clearing with ToolDia = %s started."

#: flatcamTools/ToolNonCopperClear.py:798
#, python-format
msgid "[ERROR_NOTCL] NCCTool.clear_non_copper() --> %s"
msgstr "[ERROR_NOTCL] NCCTool.clear_non_copper() --> %s"

#: flatcamTools/ToolNonCopperClear.py:803
msgid "[success] NCC Tool finished."
msgstr "[success] NCC Tool finished."

#: flatcamTools/ToolNonCopperClear.py:805
msgid ""
"[WARNING_NOTCL] NCC Tool finished but some PCB features could not be "
"cleared. Check the result."
msgstr ""
"[WARNING_NOTCL] NCC Tool finished but some PCB features could not be "
"cleared. Check the result."

#: flatcamTools/ToolNonCopperClear.py:851
#, python-format
msgid "[success] Non-Copper Rest Clearing with ToolDia = %s started."
msgstr "[success] Non-Copper Rest Clearing with ToolDia = %s started."

#: flatcamTools/ToolNonCopperClear.py:949
#, python-format
msgid "[ERROR_NOTCL] NCCTool.clear_non_copper_rest() --> %s"
msgstr "[ERROR_NOTCL] NCCTool.clear_non_copper_rest() --> %s"

#: flatcamTools/ToolNonCopperClear.py:957
msgid ""
"[ERROR_NOTCL] NCC Tool finished but could not clear the object with current "
"settings."
msgstr ""
"[ERROR_NOTCL] NCC Tool finished but could not clear the object with current "
"settings."

#: flatcamTools/ToolPDF.py:38
msgid "PDF Import Tool"
msgstr "PDF Import Tool"

#: flatcamTools/ToolPDF.py:152 flatcamTools/ToolPDF.py:156
msgid "Open PDF"
msgstr "Open PDF"

#: flatcamTools/ToolPDF.py:159
msgid "[WARNING_NOTCL] Open PDF cancelled."
msgstr "[WARNING_NOTCL] Open PDF cancelled."

#: flatcamTools/ToolPDF.py:186
msgid "Parsing PDF file ..."
msgstr "Parsing PDF file ..."

#: flatcamTools/ToolPDF.py:265 flatcamTools/ToolPDF.py:338
#, python-format
msgid "Rendering PDF layer #%d ..."
msgstr "Rendering PDF layer #%d ..."

#: flatcamTools/ToolPDF.py:269 flatcamTools/ToolPDF.py:342
msgid "[ERROR_NOTCL] Open PDF file failed."
msgstr "[ERROR_NOTCL] Open PDF file failed."

#: flatcamTools/ToolPDF.py:274 flatcamTools/ToolPDF.py:347
#, python-format
msgid "[success] Rendered: %s"
msgstr "[success] Rendered: %s"

#: flatcamTools/ToolPaint.py:24
msgid "Paint Area"
msgstr "Paint Area"

#: flatcamTools/ToolPaint.py:60
msgid "Geometry:"
msgstr "Geometry:"

#: flatcamTools/ToolPaint.py:62
msgid "Geometry object to be painted.                        "
msgstr "Geometry object to be painted.                        "

#: flatcamTools/ToolPaint.py:71
msgid ""
"Tools pool from which the algorithm\n"
"will pick the ones used for painting."
msgstr ""
"Tools pool from which the algorithm\n"
"will pick the ones used for painting."

#: flatcamTools/ToolPaint.py:86
msgid ""
"This is the Tool Number.\n"
"Painting will start with the tool with the biggest diameter,\n"
"continuing until there are no more tools.\n"
"Only tools that create painting geometry will still be present\n"
"in the resulting geometry. This is because with some tools\n"
"this function will not be able to create painting geometry."
msgstr ""
"This is the Tool Number.\n"
"Painting will start with the tool with the biggest diameter,\n"
"continuing until there are no more tools.\n"
"Only tools that create painting geometry will still be present\n"
"in the resulting geometry. This is because with some tools\n"
"this function will not be able to create painting geometry."

#: flatcamTools/ToolPaint.py:119
msgid "Diameter for the new tool."
msgstr "Diameter for the new tool."

#: flatcamTools/ToolPaint.py:224
msgid ""
"If checked, use 'rest machining'.\n"
"Basically it will clear copper outside PCB features,\n"
"using the biggest tool and continue with the next tools,\n"
"from bigger to smaller, to clear areas of copper that\n"
"could not be cleared by previous tool, until there is\n"
"no more copper to clear or there are no more tools.\n"
"\n"
"If not checked, use the standard algorithm."
msgstr ""
"If checked, use 'rest machining'.\n"
"Basically it will clear copper outside PCB features,\n"
"using the biggest tool and continue with the next tools,\n"
"from bigger to smaller, to clear areas of copper that\n"
"could not be cleared by previous tool, until there is\n"
"no more copper to clear or there are no more tools.\n"
"\n"
"If not checked, use the standard algorithm."

#: flatcamTools/ToolPaint.py:239
msgid ""
"How to select the polygons to paint.<BR>Options:<BR>- <B>Single</B>: left "
"mouse click on the polygon to be painted.<BR>- <B>All</B>: paint all "
"polygons."
msgstr ""
"How to select the polygons to paint.<BR>Options:<BR>- <B>Single</B>: left "
"mouse click on the polygon to be painted.<BR>- <B>All</B>: paint all "
"polygons."

#: flatcamTools/ToolPaint.py:254
msgid "Create Paint Geometry"
msgstr "Create Paint Geometry"

#: flatcamTools/ToolPaint.py:256
msgid ""
"After clicking here, click inside<BR>the polygon you wish to be painted if "
"<B>Single</B> is selected.<BR>If <B>All</B>  is selected then the Paint will "
"start after click.<BR>A new Geometry object with the tool<BR>paths will be "
"created."
msgstr ""
"After clicking here, click inside<BR>the polygon you wish to be painted if "
"<B>Single</B> is selected.<BR>If <B>All</B>  is selected then the Paint will "
"start after click.<BR>A new Geometry object with the tool<BR>paths will be "
"created."

#: flatcamTools/ToolPaint.py:733
msgid "geometry_on_paint_button"
msgstr "geometry_on_paint_button"

#: flatcamTools/ToolPaint.py:752 flatcamTools/ToolPaint.py:787
msgid "[WARNING_NOTCL] Click inside the desired polygon."
msgstr "[WARNING_NOTCL] Click inside the desired polygon."

#: flatcamTools/ToolPaint.py:774
msgid "[ERROR_NOTCL] Can't do Paint on MultiGeo geometries ..."
msgstr "[ERROR_NOTCL] Can't do Paint on MultiGeo geometries ..."

#: flatcamTools/ToolPaint.py:796 flatcamTools/ToolPaint.py:999
msgid "Painting polygon..."
msgstr "Painting polygon..."

#: flatcamTools/ToolPaint.py:847
msgid "[WARNING] No polygon found."
msgstr "[WARNING] No polygon found."

#: flatcamTools/ToolPaint.py:850
msgid "Painting polygon."
msgstr "Painting polygon."

#: flatcamTools/ToolPaint.py:892
msgid "[ERROR_NOTCL] Geometry could not be painted completely"
msgstr "[ERROR_NOTCL] Geometry could not be painted completely"

#: flatcamTools/ToolPaint.py:918
#, python-format
msgid ""
"[ERROR] Could not do Paint. Try a different combination of parameters. Or a "
"different strategy of paint\n"
"%s"
msgstr ""
"[ERROR] Could not do Paint. Try a different combination of parameters. Or a "
"different strategy of paint\n"
"%s"

#: flatcamTools/ToolPaint.py:960
#, python-format
msgid "[ERROR_NOTCL] PaintTool.paint_poly() --> %s"
msgstr "[ERROR_NOTCL] PaintTool.paint_poly() --> %s"

#: flatcamTools/ToolPaint.py:966 flatcamTools/ToolPaint.py:1259
msgid "Polygon Paint started ..."
msgstr "Polygon Paint started ..."

#: flatcamTools/ToolPaint.py:1115 flatcamTools/ToolPaint.py:1204
#, python-format
msgid ""
"[ERROR] Could not do Paint All. Try a different combination of parameters. "
"Or a different Method of paint\n"
"%s"
msgstr ""
"[ERROR] Could not do Paint All. Try a different combination of parameters. "
"Or a different Method of paint\n"
"%s"

#: flatcamTools/ToolPaint.py:1139
msgid ""
"[ERROR] There is no Painting Geometry in the file.\n"
"Usually it means that the tool diameter is too big for the painted "
"geometry.\n"
"Change the painting parameters and try again."
msgstr ""
"[ERROR] There is no Painting Geometry in the file.\n"
"Usually it means that the tool diameter is too big for the painted "
"geometry.\n"
"Change the painting parameters and try again."

#: flatcamTools/ToolPaint.py:1148
msgid "[success] Paint All Done."
msgstr "[success] Paint All Done."

#: flatcamTools/ToolPaint.py:1234
msgid ""
"[ERROR_NOTCL] There is no Painting Geometry in the file.\n"
"Usually it means that the tool diameter is too big for the painted "
"geometry.\n"
"Change the painting parameters and try again."
msgstr ""
"[ERROR_NOTCL] There is no Painting Geometry in the file.\n"
"Usually it means that the tool diameter is too big for the painted "
"geometry.\n"
"Change the painting parameters and try again."

#: flatcamTools/ToolPaint.py:1243
msgid "[success] Paint All with Rest-Machining done."
msgstr "[success] Paint All with Rest-Machining done."

#: flatcamTools/ToolPanelize.py:25
msgid "Panelize PCB"
msgstr "Panelize PCB"

#: flatcamTools/ToolPanelize.py:58
msgid ""
"Specify the type of object to be panelized\n"
"It can be of type: Gerber, Excellon or Geometry.\n"
"The selection here decide the type of objects that will be\n"
"in the Object combobox."
msgstr ""
"Specify the type of object to be panelized\n"
"It can be of type: Gerber, Excellon or Geometry.\n"
"The selection here decide the type of objects that will be\n"
"in the Object combobox."

#: flatcamTools/ToolPanelize.py:73
msgid ""
"Object to be panelized. This means that it will\n"
"be duplicated in an array of rows and columns."
msgstr ""
"Object to be panelized. This means that it will\n"
"be duplicated in an array of rows and columns."

#: flatcamTools/ToolPanelize.py:86
#| msgid "<b>Generate Isolation Geometry:</b>"
msgid "<b>Penelization Reference:</b>"
msgstr "<b>Penelization Reference:</b>"

#: flatcamTools/ToolPanelize.py:88
msgid ""
"Choose the reference for panelization:\n"
"- Object = the bounding box of a different object\n"
"- Bounding Box = the bounding box of the object to be panelized\n"
"\n"
"The reference is useful when doing panelization for more than one\n"
"object. The spacings (really offsets) will be applied in reference\n"
"to this reference object therefore maintaining the panelized\n"
"objects in sync."
msgstr ""
"Choose the reference for panelization:\n"
"- Object = the bounding box of a different object\n"
"- Bounding Box = the bounding box of the object to be panelized\n"
"\n"
"The reference is useful when doing panelization for more than one\n"
"object. The spacings (really offsets) will be applied in reference\n"
"to this reference object therefore maintaining the panelized\n"
"objects in sync."

#: flatcamTools/ToolPanelize.py:113
msgid ""
"Specify the type of object to be used as an container for\n"
"panelization. It can be: Gerber or Geometry type.\n"
"The selection here decide the type of objects that will be\n"
"in the Box Object combobox."
msgstr ""
"Specify the type of object to be used as an container for\n"
"panelization. It can be: Gerber or Geometry type.\n"
"The selection here decide the type of objects that will be\n"
"in the Box Object combobox."

#: flatcamTools/ToolPanelize.py:128
msgid ""
"The actual object that is used a container for the\n"
" selected object that is to be panelized."
msgstr ""
"The actual object that is used a container for the\n"
" selected object that is to be panelized."

#: flatcamTools/ToolPanelize.py:134
#| msgid "<b>Tool Data</b>"
msgid "<b>Panel Data:</b>"
msgstr "<b>Panel Data:</b>"

#: flatcamTools/ToolPanelize.py:136
msgid ""
"This informations will shape the resulting panel.\n"
"The number of rows and columns will set how many\n"
"duplicates of the original geometry will be generated.\n"
"\n"
"The spacings will set the distance between any two\n"
"elements of the panel array."
msgstr ""
"This informations will shape the resulting panel.\n"
"The number of rows and columns will set how many\n"
"duplicates of the original geometry will be generated.\n"
"\n"
"The spacings will set the distance between any two\n"
"elements of the panel array."

#: flatcamTools/ToolPanelize.py:183
#| msgid "Panel Type:"
msgid "<b>Panel Type:</b>"
msgstr "<b>Panel Type:</b>"

#: flatcamTools/ToolPanelize.py:185
msgid ""
"Choose the type of object for the panel object:\n"
"- Geometry\n"
"- Gerber"
msgstr ""
"Choose the type of object for the panel object:\n"
"- Geometry\n"
"- Gerber"

#: flatcamTools/ToolPanelize.py:193
msgid "Constrain panel within:"
msgstr "Constrain panel within:"

#: flatcamTools/ToolPanelize.py:227
msgid "Panelize Object"
msgstr "Panelize Object"

#: flatcamTools/ToolPanelize.py:229
msgid ""
"Panelize the specified object around the specified box.\n"
"In other words it creates multiple copies of the source object,\n"
"arranged in a 2D array of rows and columns."
msgstr ""
"Panelize the specified object around the specified box.\n"
"In other words it creates multiple copies of the source object,\n"
"arranged in a 2D array of rows and columns."

#: flatcamTools/ToolPanelize.py:370
#, python-format
#| msgid "[WARNING_NOTCL] No object Box. Using instead %s"
msgid "[WARNING_NOTCL]No object Box. Using instead %s"
msgstr "[WARNING_NOTCL]No object Box. Using instead %s"

#: flatcamTools/ToolPanelize.py:453
msgid ""
"[ERROR_NOTCL] Columns or Rows are zero value. Change them to a positive "
"integer."
msgstr ""
"[ERROR_NOTCL] Columns or Rows are zero value. Change them to a positive "
"integer."

#: flatcamTools/ToolPanelize.py:478 flatcamTools/ToolPanelize.py:635
msgid "Generating panel ... Please wait."
msgstr "Generating panel ... Please wait."

#: flatcamTools/ToolPanelize.py:628
msgid "[success] Panel done..."
msgstr "[success] Panel done..."

#: flatcamTools/ToolPanelize.py:631
#, python-brace-format
msgid ""
"[WARNING] Too big for the constrain area. Final panel has {col} columns and "
"{row} rows"
msgstr ""
"[WARNING] Too big for the constrain area. Final panel has {col} columns and "
"{row} rows"

#: flatcamTools/ToolPanelize.py:640
msgid "[success] Panel created successfully."
msgstr "[success] Panel created successfully."

#: flatcamTools/ToolPcbWizard.py:32
msgid "PcbWizard Import Tool"
msgstr "PcbWizard Import Tool"

#: flatcamTools/ToolPcbWizard.py:40
msgid "Import 2-file Excellon"
msgstr "Import 2-file Excellon"

#: flatcamTools/ToolPcbWizard.py:57
msgid "Excellon file:"
msgstr "Excellon file:"

#: flatcamTools/ToolPcbWizard.py:59
msgid ""
"Load the Excellon file.\n"
"Usually it has a .DRL extension"
msgstr ""
"Load the Excellon file.\n"
"Usually it has a .DRL extension"

#: flatcamTools/ToolPcbWizard.py:66
msgid "INF file:"
msgstr "INF file:"

#: flatcamTools/ToolPcbWizard.py:68
msgid "Load the INF file."
msgstr "Load the INF file."

#: flatcamTools/ToolPcbWizard.py:81
msgid "Tool Number"
msgstr "Tool Number"

#: flatcamTools/ToolPcbWizard.py:83
msgid "Tool diameter in file units."
msgstr "Tool diameter in file units."

#: flatcamTools/ToolPcbWizard.py:97
msgid "Int. digits:"
msgstr "Int. digits:"

#: flatcamTools/ToolPcbWizard.py:99
msgid "The number of digits for the integral part of the coordinates."
msgstr "The number of digits for the integral part of the coordinates."

#: flatcamTools/ToolPcbWizard.py:106
msgid "Frac. digits:"
msgstr "Frac. digits:"

#: flatcamTools/ToolPcbWizard.py:108
msgid "The number of digits for the fractional part of the coordinates."
msgstr "The number of digits for the fractional part of the coordinates."

#: flatcamTools/ToolPcbWizard.py:116
msgid "Zeros supp.:"
msgstr "Zeros supp.:"

#: flatcamTools/ToolPcbWizard.py:118
msgid ""
"The type of zeros suppression used.\n"
"Can be of type:\n"
"- LZ = leading zeros are kept\n"
"- TZ = trailing zeros are kept\n"
"- No Suppression = no zero suppression"
msgstr ""
"The type of zeros suppression used.\n"
"Can be of type:\n"
"- LZ = leading zeros are kept\n"
"- TZ = trailing zeros are kept\n"
"- No Suppression = no zero suppression"

#: flatcamTools/ToolPcbWizard.py:129
msgid "Units"
msgstr "Units"

#: flatcamTools/ToolPcbWizard.py:131
msgid ""
"The type of units that the coordinates and tool\n"
"diameters are using. Can be INCH or MM."
msgstr ""
"The type of units that the coordinates and tool\n"
"diameters are using. Can be INCH or MM."

#: flatcamTools/ToolPcbWizard.py:138
msgid "Import Excellon"
msgstr "Import Excellon"

#: flatcamTools/ToolPcbWizard.py:140
msgid ""
"Import in FlatCAM an Excellon file\n"
"that store it's information's in 2 files.\n"
"One usually has .DRL extension while\n"
"the other has .INF extension."
msgstr ""
"Import in FlatCAM an Excellon file\n"
"that store it's information's in 2 files.\n"
"One usually has .DRL extension while\n"
"the other has .INF extension."

#: flatcamTools/ToolPcbWizard.py:194
msgid "PCBWizard Tool"
msgstr "PCBWizard Tool"

#: flatcamTools/ToolPcbWizard.py:288 flatcamTools/ToolPcbWizard.py:292
msgid "Load PcbWizard Excellon file"
msgstr "Load PcbWizard Excellon file"

#: flatcamTools/ToolPcbWizard.py:312 flatcamTools/ToolPcbWizard.py:316
msgid "Load PcbWizard INF file"
msgstr "Load PcbWizard INF file"

#: flatcamTools/ToolPcbWizard.py:363
msgid ""
"[ERROR] The INF file does not contain the tool table.\n"
"Try to open the Excellon file from File -> Open -> Excellon\n"
"and edit the drill diameters manually."
msgstr ""
"[ERROR] The INF file does not contain the tool table.\n"
"Try to open the Excellon file from File -> Open -> Excellon\n"
"and edit the drill diameters manually."

#: flatcamTools/ToolPcbWizard.py:383
msgid "[success] PcbWizard .INF file loaded."
msgstr "[success] PcbWizard .INF file loaded."

#: flatcamTools/ToolPcbWizard.py:387
msgid "[success] Main PcbWizard Excellon file loaded."
msgstr "[success] Main PcbWizard Excellon file loaded."

#: flatcamTools/ToolPcbWizard.py:424
#, python-format
msgid "[ERROR_NOTCL] Cannot parse file: %s"
msgstr "[ERROR_NOTCL] Cannot parse file: %s"

#: flatcamTools/ToolPcbWizard.py:447
msgid "Importing Excellon."
msgstr "Importing Excellon."

#: flatcamTools/ToolPcbWizard.py:454
msgid "[ERROR_NOTCL] Import Excellon file failed."
msgstr "[ERROR_NOTCL] Import Excellon file failed."

#: flatcamTools/ToolPcbWizard.py:461
#, python-format
msgid "[success] Imported: %s"
msgstr "[success] Imported: %s"

#: flatcamTools/ToolPcbWizard.py:464
msgid "[WARNING_NOTCL] Excellon merging is in progress. Please wait..."
msgstr "[WARNING_NOTCL] Excellon merging is in progress. Please wait..."

#: flatcamTools/ToolPcbWizard.py:466
msgid "[ERROR_NOTCL] The imported Excellon file is None."
msgstr "[ERROR_NOTCL] The imported Excellon file is None."

#: flatcamTools/ToolProperties.py:103
msgid "[ERROR_NOTCL] Properties Tool was not displayed. No object selected."
msgstr "[ERROR_NOTCL] Properties Tool was not displayed. No object selected."

#: flatcamTools/ToolProperties.py:110
msgid "[success] Object Properties are displayed."
msgstr "[success] Object Properties are displayed."

#: flatcamTools/ToolProperties.py:111
msgid "Properties Tool"
msgstr "Properties Tool"

#: flatcamTools/ToolShell.py:69
msgid "...proccessing..."
msgstr "...proccessing..."

#: flatcamTools/ToolShell.py:71
#, python-format
msgid "...proccessing... [%s]"
msgstr "...proccessing... [%s]"

#: flatcamTools/ToolSolderPaste.py:37
msgid "Solder Paste Tool"
msgstr "Solder Paste Tool"

#: flatcamTools/ToolSolderPaste.py:65
msgid "Gerber Solder paste object.                        "
msgstr "Gerber Solder paste object.                        "

#: flatcamTools/ToolSolderPaste.py:72
msgid ""
"Tools pool from which the algorithm\n"
"will pick the ones used for dispensing solder paste."
msgstr ""
"Tools pool from which the algorithm\n"
"will pick the ones used for dispensing solder paste."

#: flatcamTools/ToolSolderPaste.py:87
msgid ""
"This is the Tool Number.\n"
"The solder dispensing will start with the tool with the biggest \n"
"diameter, continuing until there are no more Nozzle tools.\n"
"If there are no longer tools but there are still pads not covered\n"
" with solder paste, the app will issue a warning message box."
msgstr ""
"This is the Tool Number.\n"
"The solder dispensing will start with the tool with the biggest \n"
"diameter, continuing until there are no more Nozzle tools.\n"
"If there are no longer tools but there are still pads not covered\n"
" with solder paste, the app will issue a warning message box."

#: flatcamTools/ToolSolderPaste.py:94
msgid ""
"Nozzle tool Diameter. It's value (in current FlatCAM units)\n"
"is the width of the solder paste dispensed."
msgstr ""
"Nozzle tool Diameter. It's value (in current FlatCAM units)\n"
"is the width of the solder paste dispensed."

#: flatcamTools/ToolSolderPaste.py:101
msgid "New Nozzle Tool"
msgstr "New Nozzle Tool"

#: flatcamTools/ToolSolderPaste.py:117
msgid ""
"Add a new nozzle tool to the Tool Table\n"
"with the diameter specified above."
msgstr ""
"Add a new nozzle tool to the Tool Table\n"
"with the diameter specified above."

#: flatcamTools/ToolSolderPaste.py:129
msgid "Generate solder paste dispensing geometry."
msgstr "Generate solder paste dispensing geometry."

#: flatcamTools/ToolSolderPaste.py:142
msgid "STEP 1"
msgstr "STEP 1"

#: flatcamTools/ToolSolderPaste.py:144
msgid ""
"First step is to select a number of nozzle tools for usage\n"
"and then optionally modify the GCode parameters bellow."
msgstr ""
"First step is to select a number of nozzle tools for usage\n"
"and then optionally modify the GCode parameters bellow."

#: flatcamTools/ToolSolderPaste.py:147
msgid ""
"Select tools.\n"
"Modify parameters."
msgstr ""
"Select tools.\n"
"Modify parameters."

#: flatcamTools/ToolSolderPaste.py:290
msgid "Generate GCode"
msgstr "Generate GCode"

#: flatcamTools/ToolSolderPaste.py:292
msgid ""
"Generate GCode for Solder Paste dispensing\n"
"on PCB pads."
msgstr ""
"Generate GCode for Solder Paste dispensing\n"
"on PCB pads."

#: flatcamTools/ToolSolderPaste.py:308
msgid "STEP 2:"
msgstr "STEP 2:"

#: flatcamTools/ToolSolderPaste.py:310
msgid ""
"Second step is to create a solder paste dispensing\n"
"geometry out of an Solder Paste Mask Gerber file."
msgstr ""
"Second step is to create a solder paste dispensing\n"
"geometry out of an Solder Paste Mask Gerber file."

#: flatcamTools/ToolSolderPaste.py:326
msgid "Geo Result:"
msgstr "Geo Result:"

#: flatcamTools/ToolSolderPaste.py:328
msgid ""
"Geometry Solder Paste object.\n"
"The name of the object has to end in:\n"
"'_solderpaste' as a protection."
msgstr ""
"Geometry Solder Paste object.\n"
"The name of the object has to end in:\n"
"'_solderpaste' as a protection."

#: flatcamTools/ToolSolderPaste.py:337
msgid "STEP 3:"
msgstr "STEP 3:"

#: flatcamTools/ToolSolderPaste.py:339
msgid ""
"Third step is to select a solder paste dispensing geometry,\n"
"and then generate a CNCJob object.\n"
"\n"
"REMEMBER: if you want to create a CNCJob with new parameters,\n"
"first you need to generate a geometry with those new params,\n"
"and only after that you can generate an updated CNCJob."
msgstr ""
"Third step is to select a solder paste dispensing geometry,\n"
"and then generate a CNCJob object.\n"
"\n"
"REMEMBER: if you want to create a CNCJob with new parameters,\n"
"first you need to generate a geometry with those new params,\n"
"and only after that you can generate an updated CNCJob."

#: flatcamTools/ToolSolderPaste.py:359
msgid "CNC Result:"
msgstr "CNC Result:"

#: flatcamTools/ToolSolderPaste.py:361
msgid ""
"CNCJob Solder paste object.\n"
"In order to enable the GCode save section,\n"
"the name of the object has to end in:\n"
"'_solderpaste' as a protection."
msgstr ""
"CNCJob Solder paste object.\n"
"In order to enable the GCode save section,\n"
"the name of the object has to end in:\n"
"'_solderpaste' as a protection."

#: flatcamTools/ToolSolderPaste.py:371
msgid "View GCode"
msgstr "View GCode"

#: flatcamTools/ToolSolderPaste.py:373
msgid ""
"View the generated GCode for Solder Paste dispensing\n"
"on PCB pads."
msgstr ""
"View the generated GCode for Solder Paste dispensing\n"
"on PCB pads."

#: flatcamTools/ToolSolderPaste.py:377
msgid "Save GCode"
msgstr "Save GCode"

#: flatcamTools/ToolSolderPaste.py:379
msgid ""
"Save the generated GCode for Solder Paste dispensing\n"
"on PCB pads, to a file."
msgstr ""
"Save the generated GCode for Solder Paste dispensing\n"
"on PCB pads, to a file."

#: flatcamTools/ToolSolderPaste.py:383
msgid "STEP 4:"
msgstr "STEP 4:"

#: flatcamTools/ToolSolderPaste.py:385
msgid ""
"Fourth step (and last) is to select a CNCJob made from \n"
"a solder paste dispensing geometry, and then view/save it's GCode."
msgstr ""
"Fourth step (and last) is to select a CNCJob made from \n"
"a solder paste dispensing geometry, and then view/save it's GCode."

#: flatcamTools/ToolSolderPaste.py:413
msgid "Delete Object"
msgstr "Delete Object"

#: flatcamTools/ToolSolderPaste.py:789
msgid ""
"[WARNING_NOTCL] Adding Nozzle tool cancelled. Tool already in Tool Table."
msgstr ""
"[WARNING_NOTCL] Adding Nozzle tool cancelled. Tool already in Tool Table."

#: flatcamTools/ToolSolderPaste.py:794
msgid "[success] New Nozzle tool added to Tool Table."
msgstr "[success] New Nozzle tool added to Tool Table."

#: flatcamTools/ToolSolderPaste.py:836
msgid "[success] Nozzle tool from Tool Table was edited."
msgstr "[success] Nozzle tool from Tool Table was edited."

#: flatcamTools/ToolSolderPaste.py:892
msgid "[WARNING_NOTCL] Delete failed. Select a Nozzle tool to delete."
msgstr "[WARNING_NOTCL] Delete failed. Select a Nozzle tool to delete."

#: flatcamTools/ToolSolderPaste.py:897
msgid "[success] Nozzle tool(s) deleted from Tool Table."
msgstr "[success] Nozzle tool(s) deleted from Tool Table."

#: flatcamTools/ToolSolderPaste.py:952
msgid "[WARNING_NOTCL] No SolderPaste mask Gerber object loaded."
msgstr "[WARNING_NOTCL] No SolderPaste mask Gerber object loaded."

#: flatcamTools/ToolSolderPaste.py:969
msgid "Creating Solder Paste dispensing geometry."
msgstr "Creating Solder Paste dispensing geometry."

#: flatcamTools/ToolSolderPaste.py:981
msgid "[WARNING_NOTCL] No Nozzle tools in the tool table."
msgstr "[WARNING_NOTCL] No Nozzle tools in the tool table."

#: flatcamTools/ToolSolderPaste.py:1110
msgid "[success] Solder Paste geometry generated successfully..."
msgstr "[success] Solder Paste geometry generated successfully..."

#: flatcamTools/ToolSolderPaste.py:1116
msgid ""
"[WARNING_NOTCL] Some or all pads have no solder due of inadequate nozzle "
"diameters..."
msgstr ""
"[WARNING_NOTCL] Some or all pads have no solder due of inadequate nozzle "
"diameters..."

#: flatcamTools/ToolSolderPaste.py:1130
msgid "Generating Solder Paste dispensing geometry..."
msgstr "Generating Solder Paste dispensing geometry..."

#: flatcamTools/ToolSolderPaste.py:1150
msgid "[WARNING_NOTCL] There is no Geometry object available."
msgstr "[WARNING_NOTCL] There is no Geometry object available."

#: flatcamTools/ToolSolderPaste.py:1154
msgid ""
"[WARNING_NOTCL] This Geometry can't be processed. NOT a solder_paste_tool "
"geometry."
msgstr ""
"[WARNING_NOTCL] This Geometry can't be processed. NOT a solder_paste_tool "
"geometry."

#: flatcamTools/ToolSolderPaste.py:1259
#, python-format
msgid "[success] ToolSolderPaste CNCjob created: %s"
msgstr "[success] ToolSolderPaste CNCjob created: %s"

#: flatcamTools/ToolSolderPaste.py:1291 flatcamTools/ToolSolderPaste.py:1295
#: flatcamTools/ToolSolderPaste.py:1346
msgid ""
"[WARNING_NOTCL] This CNCJob object can't be processed. NOT a "
"solder_paste_tool CNCJob object."
msgstr ""
"[WARNING_NOTCL] This CNCJob object can't be processed. NOT a "
"solder_paste_tool CNCJob object."

#: flatcamTools/ToolSolderPaste.py:1318
msgid "[ERROR_NOTCL] No Gcode in the object..."
msgstr "[ERROR_NOTCL] No Gcode in the object..."

#: flatcamTools/ToolSolderPaste.py:1327
#, python-format
msgid "[ERROR] ToolSolderPaste.on_view_gcode() -->%s"
msgstr "[ERROR] ToolSolderPaste.on_view_gcode() -->%s"

#: flatcamTools/ToolSolderPaste.py:1356
msgid "Export GCode ..."
msgstr "Export GCode ..."

#: flatcamTools/ToolSolderPaste.py:1396
#, python-format
msgid "[success] Solder paste dispenser GCode file saved to: %s"
msgstr "[success] Solder paste dispenser GCode file saved to: %s"

#: flatcamTools/ToolSub.py:55
msgid "<b>Gerber Objects</b>"
msgstr "<b>Gerber Objects</b>"

#: flatcamTools/ToolSub.py:64 flatcamTools/ToolSub.py:110
msgid "Target:"
msgstr "Target:"

#: flatcamTools/ToolSub.py:66
msgid ""
"Gerber object from which to substract\n"
"the substractor Gerber object."
msgstr ""
"Gerber object from which to substract\n"
"the substractor Gerber object."

#: flatcamTools/ToolSub.py:78 flatcamTools/ToolSub.py:124
msgid "Substractor:"
msgstr "Substractor:"

#: flatcamTools/ToolSub.py:80
msgid ""
"Gerber object that will be substracted\n"
"from the target Gerber object."
msgstr ""
"Gerber object that will be substracted\n"
"from the target Gerber object."

#: flatcamTools/ToolSub.py:87
msgid "Substract Gerber"
msgstr "Substract Gerber"

#: flatcamTools/ToolSub.py:89
msgid ""
"Will remove the area occupied by the substractor\n"
"Gerber from the Target Gerber.\n"
"Can be used to remove the overlapping silkscreen\n"
"over the soldermask."
msgstr ""
"Will remove the area occupied by the substractor\n"
"Gerber from the Target Gerber.\n"
"Can be used to remove the overlapping silkscreen\n"
"over the soldermask."

#: flatcamTools/ToolSub.py:101
msgid "<b>Geometry Objects</b>"
msgstr "<b>Geometry Objects</b>"

#: flatcamTools/ToolSub.py:112
msgid ""
"Geometry object from which to substract\n"
"the substractor Geometry object."
msgstr ""
"Geometry object from which to substract\n"
"the substractor Geometry object."

#: flatcamTools/ToolSub.py:126
msgid ""
"Geometry object that will be substracted\n"
"from the target Geometry object."
msgstr ""
"Geometry object that will be substracted\n"
"from the target Geometry object."

#: flatcamTools/ToolSub.py:133
msgid "Substract Geometry"
msgstr "Substract Geometry"

#: flatcamTools/ToolSub.py:135
msgid ""
"Will remove the area occupied by the substractor\n"
"Geometry from the Target Geometry."
msgstr ""
"Will remove the area occupied by the substractor\n"
"Geometry from the Target Geometry."

#: flatcamTools/ToolSub.py:215
msgid "Sub Tool"
msgstr "Sub Tool"

#: flatcamTools/ToolSub.py:230 flatcamTools/ToolSub.py:421
msgid "[ERROR_NOTCL] No Target object loaded."
msgstr "[ERROR_NOTCL] No Target object loaded."

#: flatcamTools/ToolSub.py:242 flatcamTools/ToolSub.py:433
msgid "[ERROR_NOTCL] No Substractor object loaded."
msgstr "[ERROR_NOTCL] No Substractor object loaded."

#: flatcamTools/ToolSub.py:294
#, python-format
msgid "Parsing aperture %s geometry ..."
msgstr "Parsing aperture %s geometry ..."

#: flatcamTools/ToolSub.py:396 flatcamTools/ToolSub.py:539
msgid "Generating new object ..."
msgstr "Generating new object ..."

#: flatcamTools/ToolSub.py:399 flatcamTools/ToolSub.py:542
msgid "[ERROR_NOTCL] Generating new object failed."
msgstr "[ERROR_NOTCL] Generating new object failed."

#: flatcamTools/ToolSub.py:403 flatcamTools/ToolSub.py:547
#, python-format
msgid "[success] Created: %s"
msgstr "[success] Created: %s"

#: flatcamTools/ToolSub.py:444
msgid ""
"[ERROR_NOTCL] Currently, the Substractor geometry cannot be of type Multigeo."
msgstr ""
"[ERROR_NOTCL] Currently, the Substractor geometry cannot be of type Multigeo."

#: flatcamTools/ToolSub.py:489
msgid "Parsing solid_geometry ..."
msgstr "Parsing solid_geometry ..."

#: flatcamTools/ToolSub.py:491
#, python-format
msgid "Parsing tool %s geometry ..."
msgstr "Parsing tool %s geometry ..."

#: flatcamTools/ToolTransform.py:23
msgid "Object Transform"
msgstr "Object Transform"

#: flatcamTools/ToolTransform.py:84
msgid ""
"Rotate the selected object(s).\n"
"The point of reference is the middle of\n"
"the bounding box for all selected objects."
msgstr ""
"Rotate the selected object(s).\n"
"The point of reference is the middle of\n"
"the bounding box for all selected objects."

#: flatcamTools/ToolTransform.py:120 flatcamTools/ToolTransform.py:138
msgid ""
"Skew/shear the selected object(s).\n"
"The point of reference is the middle of\n"
"the bounding box for all selected objects."
msgstr ""
"Skew/shear the selected object(s).\n"
"The point of reference is the middle of\n"
"the bounding box for all selected objects."

#: flatcamTools/ToolTransform.py:176 flatcamTools/ToolTransform.py:193
msgid ""
"Scale the selected object(s).\n"
"The point of reference depends on \n"
"the Scale reference checkbox state."
msgstr ""
"Scale the selected object(s).\n"
"The point of reference depends on \n"
"the Scale reference checkbox state."

#: flatcamTools/ToolTransform.py:202
msgid ""
"Scale the selected object(s)\n"
"using the Scale Factor X for both axis."
msgstr ""
"Scale the selected object(s)\n"
"using the Scale Factor X for both axis."

#: flatcamTools/ToolTransform.py:250 flatcamTools/ToolTransform.py:267
msgid ""
"Offset the selected object(s).\n"
"The point of reference is the middle of\n"
"the bounding box for all selected objects.\n"
msgstr ""
"Offset the selected object(s).\n"
"The point of reference is the middle of\n"
"the bounding box for all selected objects.\n"

#: flatcamTools/ToolTransform.py:297 flatcamTools/ToolTransform.py:305
msgid ""
"Flip the selected object(s) over the X axis.\n"
"Does not create a new object.\n"
" "
msgstr ""
"Flip the selected object(s) over the X axis.\n"
"Does not create a new object.\n"
" "

#: flatcamTools/ToolTransform.py:637
msgid "[WARNING_NOTCL] No object selected. Please Select an object to rotate!"
msgstr "[WARNING_NOTCL] No object selected. Please Select an object to rotate!"

#: flatcamTools/ToolTransform.py:665
msgid "CNCJob objects can't be rotated."
msgstr "CNCJob objects can't be rotated."

#: flatcamTools/ToolTransform.py:673
msgid "[success] Rotate done ..."
msgstr "[success] Rotate done ..."

#: flatcamTools/ToolTransform.py:688
msgid "[WARNING_NOTCL] No object selected. Please Select an object to flip!"
msgstr "[WARNING_NOTCL] No object selected. Please Select an object to flip!"

#: flatcamTools/ToolTransform.py:723
msgid "CNCJob objects can't be mirrored/flipped."
msgstr "CNCJob objects can't be mirrored/flipped."

#: flatcamTools/ToolTransform.py:757
msgid ""
"[WARNING_NOTCL] No object selected. Please Select an object to shear/skew!"
msgstr ""
"[WARNING_NOTCL] No object selected. Please Select an object to shear/skew!"

#: flatcamTools/ToolTransform.py:779
msgid "CNCJob objects can't be skewed."
msgstr "CNCJob objects can't be skewed."

#: flatcamTools/ToolTransform.py:806
msgid "[WARNING_NOTCL] No object selected. Please Select an object to scale!"
msgstr "[WARNING_NOTCL] No object selected. Please Select an object to scale!"

#: flatcamTools/ToolTransform.py:839
msgid "CNCJob objects can't be scaled."
msgstr "CNCJob objects can't be scaled."

#: flatcamTools/ToolTransform.py:858
msgid "[WARNING_NOTCL] No object selected. Please Select an object to offset!"
msgstr "[WARNING_NOTCL] No object selected. Please Select an object to offset!"

#: flatcamTools/ToolTransform.py:867
msgid "CNCJob objects can't be offseted."
msgstr "CNCJob objects can't be offseted."

#~ msgid "[WARNING_NOTCL] Move cancelled. No shape selected."
#~ msgstr "[WARNING_NOTCL] Move cancelled. No shape selected."

#~ msgid "Click on the Destination point..."
#~ msgstr "Click on the Destination point..."

#~ msgid "Copy as &Geom"
#~ msgstr "Copy as &Geom"

#~ msgid "Ap. Scale Factor:"
#~ msgstr "Ap. Scale Factor:"

#~ msgid ""
#~ "Change the size of the selected apertures.\n"
#~ "Factor by which to multiply\n"
#~ "geometric features of this object."
#~ msgstr ""
#~ "Change the size of the selected apertures.\n"
#~ "Factor by which to multiply\n"
#~ "geometric features of this object."

#~ msgid "Ap. Buffer Factor:"
#~ msgstr "Ap. Buffer Factor:"

#~ msgid ""
#~ "Change the size of the selected apertures.\n"
#~ "Factor by which to expand/shrink\n"
#~ "geometric features of this object."
#~ msgstr ""
#~ "Change the size of the selected apertures.\n"
#~ "Factor by which to expand/shrink\n"
#~ "geometric features of this object."

#~ msgid "[WARNING]No object Box. Using instead %s"
#~ msgstr "[WARNING]No object Box. Using instead %s"

#~ msgid "Path"
#~ msgstr "Path"

#~ msgid "In"
#~ msgstr "In"

#~ msgid "Out"
#~ msgstr "Out"

#~ msgid "Custom"
#~ msgstr "Custom"

#~ msgid "Angle"
#~ msgstr "Angle"

#~ msgid "Standard"
#~ msgstr "Standard"

#~ msgid "Seed-based"
#~ msgstr "Seed-based"

#~ msgid "Straight lines"
#~ msgstr "Straight lines"

#~ msgid "Copy Drill(s)"
#~ msgstr "Copy Drill(s)"

#~ msgid "Basic"
#~ msgstr "Basic"

#~ msgid "Advanced"
#~ msgstr "Advanced"

#~ msgid "MMB"
#~ msgstr "MMB"

#~ msgid "RMB"
#~ msgstr "RMB"

#~ msgid "CTRL"
#~ msgstr "CTRL"

#~ msgid "SHIFT"
#~ msgstr "SHIFT"

#~ msgid "Climb"
#~ msgstr "Climb"

#~ msgid "Conv."
#~ msgstr "Conv."

#~ msgid "LZ"
#~ msgstr "LZ"

#~ msgid "TZ"
#~ msgstr "TZ"

#~ msgid "INCH"
#~ msgstr "INCH"

#~ msgid "MM"
#~ msgstr "MM"

#~ msgid "MH"
#~ msgstr "MH"

#~ msgid "Both"
#~ msgstr "Both"

#~ msgid "Decimal"
#~ msgstr "Decimal"

#~ msgid "No-Decimal"
#~ msgstr "No-Decimal"

#~ msgid "Travel"
#~ msgstr "Travel"

#~ msgid "X"
#~ msgstr "X"

#~ msgid "Y"
#~ msgstr "Y"

#~ msgid "Point"
#~ msgstr "Point"

#~ msgid "Box"
#~ msgstr "Box"

#~ msgid "Single"
#~ msgstr "Single"

#~ msgid "Pos"
#~ msgstr "Pos"

#~ msgid "Neg"
#~ msgstr "Neg"

#~ msgid "Gerber"
#~ msgstr "Gerber"

#~ msgid "Geo"
#~ msgstr "Geo"

#~ msgid "Solid   "
#~ msgstr "Solid   "

#~ msgid "M-Color   "
#~ msgstr "M-Color   "

#~ msgid "Done."
#~ msgstr "Done."

#~ msgid "Click on CENTER ..."
#~ msgstr "Click on CENTER ..."

#~ msgid "[success] Done. Region completed."
#~ msgstr "[success] Done. Region completed."

#~ msgid "Add an aperture to the aperture list"
#~ msgstr "Add an aperture to the aperture list"

#~ msgid "Go"
#~ msgstr "Go"

#~ msgid "Del Aperture:"
#~ msgstr "Del Aperture:"

#~ msgid ""
#~ "Delete a aperture in the aperture list.\n"
#~ "It will delete also the associated geometry."
#~ msgstr ""
#~ "Delete a aperture in the aperture list.\n"
#~ "It will delete also the associated geometry."

#~ msgid "Save && Close Edit"
#~ msgstr "Save && Close Edit"

#~ msgid ""
#~ "<b>Editor Shortcut list</b><br>\n"
#~ "            <br>\n"
#~ "            <strong><span style=\"color:#0000ff\">GEOMETRY EDITOR</span></"
#~ "strong><br>\n"
#~ "    \n"
#~ "            <table border=\"0\" cellpadding=\"0\" cellspacing=\"0\" style="
#~ "\"width:283px\">\n"
#~ "                <tbody>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\" width=\"89\"><strong>A</"
#~ "strong></td>\n"
#~ "                        <td width=\"194\">&nbsp;Draw an Arc</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>B</strong></td>\n"
#~ "                        <td>&nbsp;Buffer Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>C</strong></td>\n"
#~ "                        <td>&nbsp;Copy Geo Item</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>E</strong></td>\n"
#~ "                        <td>&nbsp;Polygon Intersection Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>I</strong></td>\n"
#~ "                        <td>&nbsp;Paint Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>J</strong></td>\n"
#~ "                        <td>&nbsp;Jump to Location (x, y)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>K</strong></td>\n"
#~ "                        <td>&nbsp;Toggle Corner Snap</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>M</strong></td>\n"
#~ "                        <td>&nbsp;Move Geo Item</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>N</strong></td>\n"
#~ "                        <td>&nbsp;Draw a Polygon</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>O</strong></td>\n"
#~ "                        <td>&nbsp;Draw a Circle</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>P</strong></td>\n"
#~ "                        <td>&nbsp;Draw a Path</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>R</strong></td>\n"
#~ "                        <td>&nbsp;Draw Rectangle</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>S</strong></td>\n"
#~ "                        <td>&nbsp;Polygon Substraction Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>T</strong></td>\n"
#~ "                        <td>&nbsp;Add Text Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>U</strong></td>\n"
#~ "                        <td>&nbsp;Polygon Union Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>X</strong></td>\n"
#~ "                        <td>&nbsp;Flip shape on X axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Y</strong></td>\n"
#~ "                        <td>&nbsp;Flip shape on Y axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>SHIFT+X</strong></td>\n"
#~ "                        <td>&nbsp;Skew shape on X axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>SHIFT+Y</strong></td>\n"
#~ "                        <td>&nbsp;Skew shape on Y axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+R</strong></td>\n"
#~ "                        <td>&nbsp;Editor Transformation Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+X</strong></td>\n"
#~ "                        <td>&nbsp;Offset shape on X axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+Y</strong></td>\n"
#~ "                        <td>&nbsp;Offset shape on Y axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>CTRL+M</strong></td>\n"
#~ "                        <td>&nbsp;Measurement Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>CTRL+S</strong></td>\n"
#~ "                        <td>&nbsp;Save Object and Exit Editor</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>CTRL+X</strong></td>\n"
#~ "                        <td>&nbsp;Polygon Cut Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Space</strong></td>\n"
#~ "                        <td>&nbsp;Rotate Geometry</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ENTER</strong></td>\n"
#~ "                        <td>&nbsp;Finish drawing for certain tools</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ESC</strong></td>\n"
#~ "                        <td>&nbsp;Abort and return to Select</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Del</strong></td>\n"
#~ "                        <td>&nbsp;Delete Shape</td>\n"
#~ "                    </tr>\n"
#~ "                </tbody>\n"
#~ "            </table>\n"
#~ "            <br>\n"
#~ "            <br>\n"
#~ "            <strong><span style=\"color:#ff0000\">EXCELLON EDITOR</span></"
#~ "strong><br>\n"
#~ "            <table border=\"0\" cellpadding=\"0\" cellspacing=\"0\" style="
#~ "\"width:283px\">\n"
#~ "                <tbody>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\" width=\"89\"><strong>A</"
#~ "strong></td>\n"
#~ "                        <td width=\"194\">&nbsp;Add Drill Array</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>C</strong></td>\n"
#~ "                        <td>&nbsp;Copy Drill(s)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>D</strong></td>\n"
#~ "                        <td>&nbsp;Add Drill</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>J</strong></td>\n"
#~ "                        <td>&nbsp;Jump to Location (x, y)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>M</strong></td>\n"
#~ "                        <td>&nbsp;Move Drill(s)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>R</strong></td>\n"
#~ "                        <td>&nbsp;Resize Drill(s)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>T</strong></td>\n"
#~ "                        <td>&nbsp;Add a new Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Del</strong></td>\n"
#~ "                        <td>&nbsp;Delete Drill(s)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Del</strong></td>\n"
#~ "                        <td>&nbsp;Alternate: Delete Tool(s)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ESC</strong></td>\n"
#~ "                        <td>&nbsp;Abort and return to Select</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>CTRL+S</strong></td>\n"
#~ "                        <td>&nbsp;Save Object and Exit Editor</td>\n"
#~ "                    </tr>\n"
#~ "                </tbody>\n"
#~ "            </table>\n"
#~ "                    "
#~ msgstr ""
#~ "<b>Editor Shortcut list</b><br>\n"
#~ "            <br>\n"
#~ "            <strong><span style=\"color:#0000ff\">GEOMETRY EDITOR</span></"
#~ "strong><br>\n"
#~ "    \n"
#~ "            <table border=\"0\" cellpadding=\"0\" cellspacing=\"0\" style="
#~ "\"width:283px\">\n"
#~ "                <tbody>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\" width=\"89\"><strong>A</"
#~ "strong></td>\n"
#~ "                        <td width=\"194\">&nbsp;Draw an Arc</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>B</strong></td>\n"
#~ "                        <td>&nbsp;Buffer Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>C</strong></td>\n"
#~ "                        <td>&nbsp;Copy Geo Item</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>E</strong></td>\n"
#~ "                        <td>&nbsp;Polygon Intersection Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>I</strong></td>\n"
#~ "                        <td>&nbsp;Paint Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>J</strong></td>\n"
#~ "                        <td>&nbsp;Jump to Location (x, y)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>K</strong></td>\n"
#~ "                        <td>&nbsp;Toggle Corner Snap</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>M</strong></td>\n"
#~ "                        <td>&nbsp;Move Geo Item</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>N</strong></td>\n"
#~ "                        <td>&nbsp;Draw a Polygon</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>O</strong></td>\n"
#~ "                        <td>&nbsp;Draw a Circle</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>P</strong></td>\n"
#~ "                        <td>&nbsp;Draw a Path</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>R</strong></td>\n"
#~ "                        <td>&nbsp;Draw Rectangle</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>S</strong></td>\n"
#~ "                        <td>&nbsp;Polygon Substraction Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>T</strong></td>\n"
#~ "                        <td>&nbsp;Add Text Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>U</strong></td>\n"
#~ "                        <td>&nbsp;Polygon Union Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>X</strong></td>\n"
#~ "                        <td>&nbsp;Flip shape on X axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Y</strong></td>\n"
#~ "                        <td>&nbsp;Flip shape on Y axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>SHIFT+X</strong></td>\n"
#~ "                        <td>&nbsp;Skew shape on X axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>SHIFT+Y</strong></td>\n"
#~ "                        <td>&nbsp;Skew shape on Y axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+R</strong></td>\n"
#~ "                        <td>&nbsp;Editor Transformation Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+X</strong></td>\n"
#~ "                        <td>&nbsp;Offset shape on X axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+Y</strong></td>\n"
#~ "                        <td>&nbsp;Offset shape on Y axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>CTRL+M</strong></td>\n"
#~ "                        <td>&nbsp;Measurement Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>CTRL+S</strong></td>\n"
#~ "                        <td>&nbsp;Save Object and Exit Editor</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>CTRL+X</strong></td>\n"
#~ "                        <td>&nbsp;Polygon Cut Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Space</strong></td>\n"
#~ "                        <td>&nbsp;Rotate Geometry</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ENTER</strong></td>\n"
#~ "                        <td>&nbsp;Finish drawing for certain tools</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ESC</strong></td>\n"
#~ "                        <td>&nbsp;Abort and return to Select</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Del</strong></td>\n"
#~ "                        <td>&nbsp;Delete Shape</td>\n"
#~ "                    </tr>\n"
#~ "                </tbody>\n"
#~ "            </table>\n"
#~ "            <br>\n"
#~ "            <br>\n"
#~ "            <strong><span style=\"color:#ff0000\">EXCELLON EDITOR</span></"
#~ "strong><br>\n"
#~ "            <table border=\"0\" cellpadding=\"0\" cellspacing=\"0\" style="
#~ "\"width:283px\">\n"
#~ "                <tbody>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\" width=\"89\"><strong>A</"
#~ "strong></td>\n"
#~ "                        <td width=\"194\">&nbsp;Add Drill Array</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>C</strong></td>\n"
#~ "                        <td>&nbsp;Copy Drill(s)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>D</strong></td>\n"
#~ "                        <td>&nbsp;Add Drill</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>J</strong></td>\n"
#~ "                        <td>&nbsp;Jump to Location (x, y)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>M</strong></td>\n"
#~ "                        <td>&nbsp;Move Drill(s)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>R</strong></td>\n"
#~ "                        <td>&nbsp;Resize Drill(s)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>T</strong></td>\n"
#~ "                        <td>&nbsp;Add a new Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Del</strong></td>\n"
#~ "                        <td>&nbsp;Delete Drill(s)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Del</strong></td>\n"
#~ "                        <td>&nbsp;Alternate: Delete Tool(s)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ESC</strong></td>\n"
#~ "                        <td>&nbsp;Abort and return to Select</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>CTRL+S</strong></td>\n"
#~ "                        <td>&nbsp;Save Object and Exit Editor</td>\n"
#~ "                    </tr>\n"
#~ "                </tbody>\n"
#~ "            </table>\n"
#~ "                    "

#~ msgid "[ERROR_NOTCL]Could not load defaults file."
#~ msgstr "[ERROR_NOTCL]Could not load defaults file."

#~ msgid "[ERROR_NOTCL] Failed to parse project file: %s"
#~ msgstr "[ERROR_NOTCL] Failed to parse project file: %s"

#~ msgid "[ERROR_NOTCL]Wrong value format entered, use a number."
#~ msgstr "[ERROR_NOTCL]Wrong value format entered, use a number."

#~ msgid ""
#~ "[ERROR_NOTCL] The aperture scale factor value is missing or wrong format."
#~ msgstr ""
#~ "[ERROR_NOTCL] The aperture scale factor value is missing or wrong format."

#~ msgid "[ERROR_NOTCL] The aperture buffer value is missing or wrong format."
#~ msgstr "[ERROR_NOTCL] The aperture buffer value is missing or wrong format."

#~ msgid "[ERROR_NOTCL]Cancelled. Empty file, it has no geometry..."
#~ msgstr "[ERROR_NOTCL]Cancelled. Empty file, it has no geometry..."

#~ msgid "[WARNING_NOTCL]Export Machine Code cancelled ..."
#~ msgstr "[WARNING_NOTCL]Export Machine Code cancelled ..."

#~ msgid "[success] GUI settings deleted ..."
#~ msgstr "[success] GUI settings deleted ..."

#~ msgid "Scale Factor:"
#~ msgstr "Scale Factor:"

#~ msgid "Buffer Factor:"
#~ msgstr "Buffer Factor:"

#~ msgid "<b>Generate new Gerber Object:</b>"
#~ msgstr "<b>Generate new Gerber Object:</b>"

#~ msgid "Will generate a new Gerber object from the changed apertures."
#~ msgstr "Will generate a new Gerber object from the changed apertures."

#~ msgid ""
#~ "Will generate a new Gerber object from the changed apertures.\n"
#~ "This new object can then be isolated etc."
#~ msgstr ""
#~ "Will generate a new Gerber object from the changed apertures.\n"
#~ "This new object can then be isolated etc."

#~ msgid "[success]Flip on the Y axis done ..."
#~ msgstr "[success]Flip on the Y axis done ..."

#~ msgid "[success]Flip on the X axis done ..."
#~ msgstr "[success]Flip on the X axis done ..."

#~ msgid "[success]Skew on the %s axis done ..."
#~ msgstr "[success]Skew on the %s axis done ..."

#~ msgid "[success]Offset on the %s axis done ..."
#~ msgstr "[success]Offset on the %s axis done ..."

#~ msgid ""
#~ "How much (fraction) of the tool width to overlap each tool pass.\n"
#~ "Example:\n"
#~ "A value here of 0.25 means 25\\% from the tool diameter found above.\n"
#~ "\n"
#~ "Adjust the value starting with lower values\n"
#~ "and increasing it if areas that should be painted are still \n"
#~ "not painted.\n"
#~ "Lower values = faster processing, faster execution on PCB.\n"
#~ "Higher values = slow processing and slow execution on CNC\n"
#~ "due of too many paths."
#~ msgstr ""
#~ "How much (fraction) of the tool width to overlap each tool pass.\n"
#~ "Example:\n"
#~ "A value here of 0.25 means 25\\% from the tool diameter found above.\n"
#~ "\n"
#~ "Adjust the value starting with lower values\n"
#~ "and increasing it if areas that should be painted are still \n"
#~ "not painted.\n"
#~ "Lower values = faster processing, faster execution on PCB.\n"
#~ "Higher values = slow processing and slow execution on CNC\n"
#~ "due of too many paths."

#~| msgid "z_toolchange = Z coord for Toolchange"
#~ msgid "z_cut = Z coord for Toolchange"
#~ msgstr "z_cut = Z coord for Toolchange"

#~| msgid "z_toolchange = Z coord for Toolchange"
#~ msgid "z_move = Z coord for Toolchange"
#~ msgstr "z_move = Z coord for Toolchange"

#~ msgid "%s/Project_%s"
#~ msgstr "%s/Project_%s"

#~ msgid "tool_tab"
#~ msgstr "tool_tab"