FlatCAM/locale/en/LC_MESSAGES/strings.po

# SOME DESCRIPTIVE TITLE.
# Copyright (C) YEAR ORGANIZATION
# FIRST AUTHOR <EMAIL@ADDRESS>, YEAR.
#
msgid ""
msgstr ""
"Project-Id-Version: \n"
"POT-Creation-Date: 2019-03-13 16:15+0200\n"
"PO-Revision-Date: 2019-03-13 16:16+0200\n"
"Language-Team: \n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Generated-By: pygettext.py 1.5\n"
"X-Generator: Poedit 2.2.1\n"
"Last-Translator: \n"
"Plural-Forms: nplurals=2; plural=(n != 1);\n"
"Language: en\n"

#: D:\1.DEV\FlatCAM_beta\camlib.py:200
msgid "[ERROR_NOTCL] self.solid_geometry is neither BaseGeometry or list."
msgstr "[ERROR_NOTCL] self.solid_geometry is neither BaseGeometry or list."

#: D:\1.DEV\FlatCAM_beta\camlib.py:1387
msgid "[success]Object was mirrored ..."
msgstr "[success]Object was mirrored ..."

#: D:\1.DEV\FlatCAM_beta\camlib.py:1389
msgid "[ERROR_NOTCL] Failed to mirror. No object selected"
msgstr "[ERROR_NOTCL] Failed to mirror. No object selected"

#: D:\1.DEV\FlatCAM_beta\camlib.py:1425
msgid "[success]Object was rotated ..."
msgstr "[success]Object was rotated ..."

#: D:\1.DEV\FlatCAM_beta\camlib.py:1427
msgid "[ERROR_NOTCL] Failed to rotate. No object selected"
msgstr "[ERROR_NOTCL] Failed to rotate. No object selected"

#: D:\1.DEV\FlatCAM_beta\camlib.py:1461
msgid "[success]Object was skewed ..."
msgstr "[success]Object was skewed ..."

#: D:\1.DEV\FlatCAM_beta\camlib.py:1463
msgid "[ERROR_NOTCL] Failed to skew. No object selected"
msgstr "[ERROR_NOTCL] Failed to skew. No object selected"

#: D:\1.DEV\FlatCAM_beta\camlib.py:2647 D:\1.DEV\FlatCAM_beta\camlib.py:2727
msgid "[WARNING] Coordinates missing, line ignored: %s"
msgstr "[WARNING] Coordinates missing, line ignored: %s"

#: D:\1.DEV\FlatCAM_beta\camlib.py:2648 D:\1.DEV\FlatCAM_beta\camlib.py:2728
msgid "[WARNING_NOTCL] GERBER file might be CORRUPT. Check the file !!!"
msgstr "[WARNING_NOTCL] GERBER file might be CORRUPT. Check the file !!!"

#: D:\1.DEV\FlatCAM_beta\camlib.py:2696
msgid ""
"[ERROR] Region does not have enough points. File will be processed but there "
"are parser errors. Line number: %s"
msgstr ""
"[ERROR] Region does not have enough points. File will be processed but there "
"are parser errors. Line number: %s"

#: D:\1.DEV\FlatCAM_beta\camlib.py:3051
msgid ""
"[ERROR]Gerber Parser ERROR.\n"
"%s:"
msgstr ""
"[ERROR]Gerber Parser ERROR.\n"
"%s:"

#: D:\1.DEV\FlatCAM_beta\camlib.py:3229 D:\1.DEV\FlatCAM_beta\camlib.py:3238
#: D:\1.DEV\FlatCAM_beta\FlatCAMObj.py:4736
#: D:\1.DEV\FlatCAM_beta\FlatCAMObj.py:4746
msgid "[ERROR_NOTCL] Scale factor has to be a number: integer or float."
msgstr "[ERROR_NOTCL] Scale factor has to be a number: integer or float."

#: D:\1.DEV\FlatCAM_beta\camlib.py:3267
msgid "[success]Gerber Scale done."
msgstr "[success]Gerber Scale done."

#: D:\1.DEV\FlatCAM_beta\camlib.py:3300
#: D:\1.DEV\FlatCAM_beta\FlatCAMObj.py:4801
msgid ""
"[ERROR_NOTCL]An (x,y) pair of values are needed. Probable you entered only "
"one value in the Offset field."
msgstr ""
"[ERROR_NOTCL]An (x,y) pair of values are needed. Probable you entered only "
"one value in the Offset field."

#: D:\1.DEV\FlatCAM_beta\camlib.py:3324
msgid "[success]Gerber Offset done."
msgstr "[success]Gerber Offset done."

#: D:\1.DEV\FlatCAM_beta\camlib.py:3700
msgid "[ERROR_NOTCL] This is GCODE mark: %s"
msgstr "[ERROR_NOTCL] This is GCODE mark: %s"

#: D:\1.DEV\FlatCAM_beta\camlib.py:4229
#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:2539
msgid "[ERROR_NOTCL] An internal error has ocurred. See shell.\n"
msgstr "[ERROR_NOTCL] An internal error has ocurred. See shell.\n"

#: D:\1.DEV\FlatCAM_beta\camlib.py:4230
msgid ""
"[ERROR] Excellon Parser error.\n"
"Parsing Failed. Line %d: %s\n"
msgstr ""
"[ERROR] Excellon Parser error.\n"
"Parsing Failed. Line %d: %s\n"

#: D:\1.DEV\FlatCAM_beta\camlib.py:4307
msgid ""
"[WARNING] Excellon.create_geometry() -> a drill location was skipped due of "
"not having a tool associated.\n"
"Check the resulting GCode."
msgstr ""
"[WARNING] Excellon.create_geometry() -> a drill location was skipped due of "
"not having a tool associated.\n"
"Check the resulting GCode."

#: D:\1.DEV\FlatCAM_beta\camlib.py:4843
msgid "[ERROR] There is no such parameter: %s"
msgstr "[ERROR] There is no such parameter: %s"

#: D:\1.DEV\FlatCAM_beta\camlib.py:4908
msgid ""
"[WARNING] The Cut Z parameter has positive value. It is the depth value to "
"drill into material.\n"
"The Cut Z parameter needs to have a negative value, assuming it is a typo "
"therefore the app will convert the value to negative. Check the resulting "
"CNC code (Gcode etc)."
msgstr ""
"[WARNING] The Cut Z parameter has positive value. It is the depth value to "
"drill into material.\n"
"The Cut Z parameter needs to have a negative value, assuming it is a typo "
"therefore the app will convert the value to negative. Check the resulting "
"CNC code (Gcode etc)."

#: D:\1.DEV\FlatCAM_beta\camlib.py:4915 D:\1.DEV\FlatCAM_beta\camlib.py:5383
#: D:\1.DEV\FlatCAM_beta\camlib.py:5654
msgid ""
"[WARNING] The Cut Z parameter is zero. There will be no cut, skipping %s file"
msgstr ""
"[WARNING] The Cut Z parameter is zero. There will be no cut, skipping %s file"

#: D:\1.DEV\FlatCAM_beta\camlib.py:4929 D:\1.DEV\FlatCAM_beta\camlib.py:5360
#: D:\1.DEV\FlatCAM_beta\camlib.py:5631
#: D:\1.DEV\FlatCAM_beta\FlatCAMObj.py:2515
#: D:\1.DEV\FlatCAM_beta\FlatCAMObj.py:4849
msgid ""
"[ERROR]The Toolchange X,Y field in Edit -> Preferences has to be in the "
"format (x, y) \n"
"but now there is only one value, not two. "
msgstr ""
"[ERROR]The Toolchange X,Y field in Edit -> Preferences has to be in the "
"format (x, y) \n"
"but now there is only one value, not two. "

#: D:\1.DEV\FlatCAM_beta\camlib.py:5131 D:\1.DEV\FlatCAM_beta\camlib.py:5221
#: D:\1.DEV\FlatCAM_beta\camlib.py:5272
msgid "[ERROR_NOTCL]The loaded Excellon file has no drills ..."
msgstr "[ERROR_NOTCL]The loaded Excellon file has no drills ..."

#: D:\1.DEV\FlatCAM_beta\camlib.py:5226
msgid "[ERROR_NOTCL] Wrong optimization type selected."
msgstr "[ERROR_NOTCL] Wrong optimization type selected."

#: D:\1.DEV\FlatCAM_beta\camlib.py:5371 D:\1.DEV\FlatCAM_beta\camlib.py:5642
msgid ""
"[ERROR_NOTCL] Cut_Z parameter is None or zero. Most likely a bad "
"combinations of other parameters."
msgstr ""
"[ERROR_NOTCL] Cut_Z parameter is None or zero. Most likely a bad "
"combinations of other parameters."

#: D:\1.DEV\FlatCAM_beta\camlib.py:5376 D:\1.DEV\FlatCAM_beta\camlib.py:5647
msgid ""
"[WARNING] The Cut Z parameter has positive value. It is the depth value to "
"cut into material.\n"
"The Cut Z parameter needs to have a negative value, assuming it is a typo "
"therefore the app will convert the value to negative.Check the resulting CNC "
"code (Gcode etc)."
msgstr ""
"[WARNING] The Cut Z parameter has positive value. It is the depth value to "
"cut into material.\n"
"The Cut Z parameter needs to have a negative value, assuming it is a typo "
"therefore the app will convert the value to negative.Check the resulting CNC "
"code (Gcode etc)."

#: D:\1.DEV\FlatCAM_beta\camlib.py:5388 D:\1.DEV\FlatCAM_beta\camlib.py:5659
msgid "[ERROR_NOTCL] Travel Z parameter is None or zero."
msgstr "[ERROR_NOTCL] Travel Z parameter is None or zero."

#: D:\1.DEV\FlatCAM_beta\camlib.py:5392 D:\1.DEV\FlatCAM_beta\camlib.py:5663
msgid ""
"[WARNING] The Travel Z parameter has negative value. It is the height value "
"to travel between cuts.\n"
"The Z Travel parameter needs to have a positive value, assuming it is a typo "
"therefore the app will convert the value to positive.Check the resulting CNC "
"code (Gcode etc)."
msgstr ""
"[WARNING] The Travel Z parameter has negative value. It is the height value "
"to travel between cuts.\n"
"The Z Travel parameter needs to have a positive value, assuming it is a typo "
"therefore the app will convert the value to positive.Check the resulting CNC "
"code (Gcode etc)."

#: D:\1.DEV\FlatCAM_beta\camlib.py:5399 D:\1.DEV\FlatCAM_beta\camlib.py:5670
msgid ""
"[WARNING] The Z Travel parameter is zero. This is dangerous, skipping %s file"
msgstr ""
"[WARNING] The Z Travel parameter is zero. This is dangerous, skipping %s file"

#: D:\1.DEV\FlatCAM_beta\camlib.py:5529
msgid "[ERROR]Expected a Geometry, got %s"
msgstr "[ERROR]Expected a Geometry, got %s"

#: D:\1.DEV\FlatCAM_beta\camlib.py:5535
msgid ""
"[ERROR_NOTCL]Trying to generate a CNC Job from a Geometry object without "
"solid_geometry."
msgstr ""
"[ERROR_NOTCL]Trying to generate a CNC Job from a Geometry object without "
"solid_geometry."

#: D:\1.DEV\FlatCAM_beta\camlib.py:5574
msgid ""
"[ERROR_NOTCL]The Tool Offset value is too negative to use for the "
"current_geometry.\n"
"Raise the value (in module) and try again."
msgstr ""
"[ERROR_NOTCL]The Tool Offset value is too negative to use for the "
"current_geometry.\n"
"Raise the value (in module) and try again."

#: D:\1.DEV\FlatCAM_beta\camlib.py:5796
msgid "[ERROR_NOTCL] There is no tool data in the SolderPaste geometry."
msgstr "[ERROR_NOTCL] There is no tool data in the SolderPaste geometry."

#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:844
msgid "[ERROR] Could not find the Language files. The App strings are missing."
msgstr ""
"[ERROR] Could not find the Language files. The App strings are missing."

#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:1672
#: D:\1.DEV\FlatCAM_beta\ObjectCollection.py:80
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolImage.py:210
msgid "Open cancelled."
msgstr "Open cancelled."

#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:1686
msgid "Open Config file failed."
msgstr "Open Config file failed."

#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:1871
msgid ""
"[WARNING_NOTCL] Editing a MultiGeo Geometry is not possible for the moment."
msgstr ""
"[WARNING_NOTCL] Editing a MultiGeo Geometry is not possible for the moment."

#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:1892
msgid "[WARNING_NOTCL]Select a Geometry or Excellon Object to edit."
msgstr "[WARNING_NOTCL]Select a Geometry or Excellon Object to edit."

#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:1903
msgid "[WARNING_NOTCL]Editor is activated ..."
msgstr "[WARNING_NOTCL]Editor is activated ..."

#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:1942
msgid "[WARNING] Object empty after edit."
msgstr "[WARNING] Object empty after edit."

#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:1951
msgid "[WARNING_NOTCL]Select a Geometry or Excellon Object to update."
msgstr "[WARNING_NOTCL]Select a Geometry or Excellon Object to update."

#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:1964
msgid "[selected] %s is updated, returning to App..."
msgstr "[selected] %s is updated, returning to App..."

#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:2287
msgid "[ERROR] Could not load defaults file."
msgstr "[ERROR] Could not load defaults file."

#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:2299
msgid "[ERROR] Failed to parse defaults file."
msgstr "[ERROR] Failed to parse defaults file."

#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:2320
#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:2323
msgid "Import FlatCAM Preferences"
msgstr "Import FlatCAM Preferences"

#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:2328
msgid "[WARNING_NOTCL]FlatCAM preferences import cancelled."
msgstr "[WARNING_NOTCL]FlatCAM preferences import cancelled."

#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:2336
#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:2810
msgid "[ERROR_NOTCL] Could not load defaults file."
msgstr "[ERROR_NOTCL] Could not load defaults file."

#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:2344
#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:2819
msgid "[ERROR_NOTCL] Failed to parse defaults file."
msgstr "[ERROR_NOTCL] Failed to parse defaults file."

#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:2347
msgid "[success]Imported Defaults from %s"
msgstr "[success]Imported Defaults from %s"

#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:2357
#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:2361
msgid "Export FlatCAM Preferences"
msgstr "Export FlatCAM Preferences"

#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:2367
msgid "[WARNING_NOTCL]FlatCAM preferences export cancelled."
msgstr "[WARNING_NOTCL]FlatCAM preferences export cancelled."

#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:2383
msgid "[ERROR_NOTCL]Could not load defaults file."
msgstr "[ERROR_NOTCL]Could not load defaults file."

#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:2402
#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:2833
msgid "[ERROR_NOTCL] Failed to write defaults to file."
msgstr "[ERROR_NOTCL] Failed to write defaults to file."

#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:2454
msgid "[ERROR_NOTCL]Failed to open recent files file for writing."
msgstr "[ERROR_NOTCL]Failed to open recent files file for writing."

#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:2540
msgid ""
"Object (%s) failed because: %s \n"
"\n"
msgstr ""
"Object (%s) failed because: %s \n"
"\n"

#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:2560
msgid "Converting units to "
msgstr "Converting units to "

#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:2621
#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:2624
#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:2627
msgid "[selected]%s created/selected: <span style=\"color:%s;\">%s</span>"
msgstr "[selected]%s created/selected: <span style=\"color:%s;\">%s</span>"

#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:2865
msgid "[success]Defaults saved."
msgstr "[success]Defaults saved."

#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:2886
msgid "[ERROR_NOTCL] Could not load factory defaults file."
msgstr "[ERROR_NOTCL] Could not load factory defaults file."

#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:2895
msgid "[ERROR_NOTCL] Failed to parse factory defaults file."
msgstr "[ERROR_NOTCL] Failed to parse factory defaults file."

#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:2909
msgid "[ERROR_NOTCL] Failed to write factory defaults to file."
msgstr "[ERROR_NOTCL] Failed to write factory defaults to file."

#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:2913
msgid "Factory defaults saved."
msgstr "Factory defaults saved."

#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:2918
msgid ""
"There are files/objects modified in FlatCAM. \n"
"Do you want to Save the project?"
msgstr ""
"There are files/objects modified in FlatCAM. \n"
"Do you want to Save the project?"

#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:2921
#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:5190
msgid "Save changes"
msgstr "Save changes"

#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:2981
msgid ""
"[ERROR] Failed join. The Geometry objects are of different types.\n"
"At least one is MultiGeo type and the other is SingleGeo type. A possibility "
"is to convert from one to another and retry joining \n"
"but in the case of converting from MultiGeo to SingleGeo, informations may "
"be lost and the result may not be what was expected. \n"
"Check the generated GCODE."
msgstr ""
"[ERROR] Failed join. The Geometry objects are of different types.\n"
"At least one is MultiGeo type and the other is SingleGeo type. A possibility "
"is to convert from one to another and retry joining \n"
"but in the case of converting from MultiGeo to SingleGeo, informations may "
"be lost and the result may not be what was expected. \n"
"Check the generated GCODE."

#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:3022
msgid "[ERROR_NOTCL]Failed. Excellon joining works only on Excellon objects."
msgstr "[ERROR_NOTCL]Failed. Excellon joining works only on Excellon objects."

#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:3044
msgid "[ERROR_NOTCL]Failed. Gerber joining works only on Gerber objects."
msgstr "[ERROR_NOTCL]Failed. Gerber joining works only on Gerber objects."

#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:3059
#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:3084
msgid "[ERROR_NOTCL]Failed. Select a Geometry Object and try again."
msgstr "[ERROR_NOTCL]Failed. Select a Geometry Object and try again."

#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:3063
#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:3088
msgid "[ERROR_NOTCL]Expected a FlatCAMGeometry, got %s"
msgstr "[ERROR_NOTCL]Expected a FlatCAMGeometry, got %s"

#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:3076
msgid "[success] A Geometry object was converted to MultiGeo type."
msgstr "[success] A Geometry object was converted to MultiGeo type."

#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:3102
msgid "[success] A Geometry object was converted to SingleGeo type."
msgstr "[success] A Geometry object was converted to SingleGeo type."

#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:3286
msgid "[success]Converted units to %s"
msgstr "[success]Converted units to %s"

#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:3297
msgid "[WARNING_NOTCL]Units conversion cancelled."
msgstr "[WARNING_NOTCL]Units conversion cancelled."

#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:3862
msgid "Open file"
msgstr "Open file"

#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:3913
#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:3918
msgid "Export G-Code ..."
msgstr "Export G-Code ..."

#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:3921
msgid "[WARNING_NOTCL]Export Code cancelled."
msgstr "[WARNING_NOTCL]Export Code cancelled."

#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:3931
msgid "[WARNING] No such file or directory"
msgstr "[WARNING] No such file or directory"

#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:3938
msgid "Saved to: %s"
msgstr "Saved to: %s"

#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:4001
#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:4033
#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:4044
#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:4055
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolNonCopperClear.py:484
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolSolderPaste.py:761
msgid ""
"[WARNING_NOTCL] Please enter a tool diameter with non-zero value, in Float "
"format."
msgstr ""
"[WARNING_NOTCL] Please enter a tool diameter with non-zero value, in Float "
"format."

#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:4006
#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:4038
#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:4049
#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:4060
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:2484
msgid "[WARNING_NOTCL] Adding Tool cancelled ..."
msgstr "[WARNING_NOTCL] Adding Tool cancelled ..."

#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:4009
msgid ""
"Adding Tool works only when Advanced is checked.\n"
"Go to Preferences -> General - Show Advanced Options."
msgstr ""
"Adding Tool works only when Advanced is checked.\n"
"Go to Preferences -> General - Show Advanced Options."

#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:4114
msgid "Object(s) deleted ..."
msgstr "Object(s) deleted ..."

#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:4118
msgid "Failed. No object(s) selected..."
msgstr "Failed. No object(s) selected..."

#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:4120
msgid "Save the work in Editor and try again ..."
msgstr "Save the work in Editor and try again ..."

#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:4133
msgid "Click to set the origin ..."
msgstr "Click to set the origin ..."

#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:4145
msgid "Jump to ..."
msgstr "Jump to ..."

#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:4146
msgid "Enter the coordinates in format X,Y:"
msgstr "Enter the coordinates in format X,Y:"

#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:4153
msgid "Wrong coordinates. Enter coordinates in format: X,Y"
msgstr "Wrong coordinates. Enter coordinates in format: X,Y"

#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:4168
msgid "Done."
msgstr "Done."

#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:4300
msgid "[success] Origin set ..."
msgstr "[success] Origin set ..."

#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:4338
msgid "[WARNING_NOTCL] No object selected to Flip on Y axis."
msgstr "[WARNING_NOTCL] No object selected to Flip on Y axis."

#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:4363
msgid "[success] Flip on Y axis done."
msgstr "[success] Flip on Y axis done."

#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:4365
#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:4405
#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:1340
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolTransform.py:747
msgid "[ERROR_NOTCL] Due of %s, Flip action was not executed."
msgstr "[ERROR_NOTCL] Due of %s, Flip action was not executed."

#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:4378
msgid "[WARNING_NOTCL] No object selected to Flip on X axis."
msgstr "[WARNING_NOTCL] No object selected to Flip on X axis."

#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:4403
msgid "[success] Flip on X axis done."
msgstr "[success] Flip on X axis done."

#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:4418
msgid "[WARNING_NOTCL] No object selected to Rotate."
msgstr "[WARNING_NOTCL] No object selected to Rotate."

#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:4421
#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:4466
#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:4497
msgid "Enter the Angle value:"
msgstr "Enter the Angle value:"

#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:4421
#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:4466
#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:4497
msgid "Transform"
msgstr "Transform"

#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:4451
msgid "[success] Rotation done."
msgstr "[success] Rotation done."

#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:4453
#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:1283
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolTransform.py:675
msgid "[ERROR_NOTCL] Due of %s, rotation movement was not executed."
msgstr "[ERROR_NOTCL] Due of %s, rotation movement was not executed."

#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:4464
msgid "[WARNING_NOTCL] No object selected to Skew/Shear on X axis."
msgstr "[WARNING_NOTCL] No object selected to Skew/Shear on X axis."

#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:4485
msgid "[success] Skew on X axis done."
msgstr "[success] Skew on X axis done."

#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:4495
msgid "[WARNING_NOTCL] No object selected to Skew/Shear on Y axis."
msgstr "[WARNING_NOTCL] No object selected to Skew/Shear on Y axis."

#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:4516
msgid "[success] Skew on Y axis done."
msgstr "[success] Skew on Y axis done."

#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:4612
#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:4639
msgid ""
"[WARNING_NOTCL] Please enter a grid value with non-zero value, in Float "
"format."
msgstr ""
"[WARNING_NOTCL] Please enter a grid value with non-zero value, in Float "
"format."

#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:4618
msgid "[success] New Grid added ..."
msgstr "[success] New Grid added ..."

#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:4621
msgid "[WARNING_NOTCL] Grid already exists ..."
msgstr "[WARNING_NOTCL] Grid already exists ..."

#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:4624
msgid "[WARNING_NOTCL] Adding New Grid cancelled ..."
msgstr "[WARNING_NOTCL] Adding New Grid cancelled ..."

#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:4646
msgid "[ERROR_NOTCL] Grid Value does not exist ..."
msgstr "[ERROR_NOTCL] Grid Value does not exist ..."

#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:4649
msgid "[success] Grid Value deleted ..."
msgstr "[success] Grid Value deleted ..."

#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:4652
msgid "[WARNING_NOTCL] Delete Grid value cancelled ..."
msgstr "[WARNING_NOTCL] Delete Grid value cancelled ..."

#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:4691
msgid "[WARNING_NOTCL]No object selected to copy it's name"
msgstr "[WARNING_NOTCL]No object selected to copy it's name"

#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:4695
msgid "Name copied on clipboard ..."
msgstr "Name copied on clipboard ..."

#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:4990
#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:4993
#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:4996
#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:4999
#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:5013
#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:5016
#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:5019
#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:5022
#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:5061
#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:5064
#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:5067
#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:5070
#: D:\1.DEV\FlatCAM_beta\ObjectCollection.py:696
#: D:\1.DEV\FlatCAM_beta\ObjectCollection.py:699
#: D:\1.DEV\FlatCAM_beta\ObjectCollection.py:702
#: D:\1.DEV\FlatCAM_beta\ObjectCollection.py:705
msgid "[selected]<span style=\"color:%s;\">%s</span> selected"
msgstr "[selected]<span style=\"color:%s;\">%s</span> selected"

#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:5187
msgid ""
"There are files/objects opened in FlatCAM.\n"
"Creating a New project will delete them.\n"
"Do you want to Save the project?"
msgstr ""
"There are files/objects opened in FlatCAM.\n"
"Creating a New project will delete them.\n"
"Do you want to Save the project?"

#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:5205
msgid "[success] New Project created..."
msgstr "[success] New Project created..."

#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:5286
msgid ""
"[WARNING_NOTCL] Select an Gerber or Excellon file to view it's source file."
msgstr ""
"[WARNING_NOTCL] Select an Gerber or Excellon file to view it's source file."

#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:5293
msgid ""
"[WARNING_NOTCL] There is no selected object for which to see it's source "
"file code."
msgstr ""
"[WARNING_NOTCL] There is no selected object for which to see it's source "
"file code."

#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:5297
#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:6728
#: D:\1.DEV\FlatCAM_beta\FlatCAMObj.py:5398
msgid "Code Editor"
msgstr "Code Editor"

#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:5310
msgid "[ERROR]App.on_view_source() -->%s"
msgstr "[ERROR]App.on_view_source() -->%s"

#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:5348
#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:5351
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:541
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:1590
msgid "Open Gerber"
msgstr "Open Gerber"

#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:5356
msgid "[WARNING_NOTCL] Open Gerber cancelled."
msgstr "[WARNING_NOTCL] Open Gerber cancelled."

#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:5377
#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:5380
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:542
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:1591
msgid "Open Excellon"
msgstr "Open Excellon"

#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:5385
msgid "[WARNING_NOTCL]Open Excellon cancelled."
msgstr "[WARNING_NOTCL]Open Excellon cancelled."

#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:5407
#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:5410
msgid "Open G-Code"
msgstr "Open G-Code"

#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:5415
msgid "[WARNING_NOTCL]Open G-Code cancelled."
msgstr "[WARNING_NOTCL]Open G-Code cancelled."

#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:5433
#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:5436
msgid "Open Project"
msgstr "Open Project"

#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:5444
msgid "[WARNING_NOTCL]Open Project cancelled."
msgstr "[WARNING_NOTCL]Open Project cancelled."

#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:5463
#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:5466
msgid "Open Configuration File"
msgstr "Open Configuration File"

#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:5470
msgid "[WARNING_NOTCL]Open Config cancelled."
msgstr "[WARNING_NOTCL]Open Config cancelled."

#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:5485
#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:5682
#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:7588
#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:7608
#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:7629
#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:7651
msgid "[WARNING_NOTCL] No object selected."
msgstr "[WARNING_NOTCL] No object selected."

#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:5486
#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:5683
msgid "Please Select a Geometry object to export"
msgstr "Please Select a Geometry object to export"

#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:5497
msgid "[ERROR_NOTCL] Only Geometry, Gerber and CNCJob objects can be used."
msgstr "[ERROR_NOTCL] Only Geometry, Gerber and CNCJob objects can be used."

#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:5510
#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:5514
msgid "Export SVG"
msgstr "Export SVG"

#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:5519
msgid "[WARNING_NOTCL]Export SVG cancelled."
msgstr "[WARNING_NOTCL]Export SVG cancelled."

#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:5533
msgid "[[WARNING_NOTCL]] Data must be a 3D array with last dimension 3 or 4"
msgstr "[[WARNING_NOTCL]] Data must be a 3D array with last dimension 3 or 4"

#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:5539
#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:5543
msgid "Export PNG Image"
msgstr "Export PNG Image"

#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:5548
msgid "Export PNG cancelled."
msgstr "Export PNG cancelled."

#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:5565
msgid ""
"[WARNING_NOTCL] No object selected. Please select an Gerber object to export."
msgstr ""
"[WARNING_NOTCL] No object selected. Please select an Gerber object to export."

#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:5570
msgid ""
"[ERROR_NOTCL] Failed. Only Gerber objects can be saved as Gerber files..."
msgstr ""
"[ERROR_NOTCL] Failed. Only Gerber objects can be saved as Gerber files..."

#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:5582
msgid "Save Gerber source file"
msgstr "Save Gerber source file"

#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:5587
msgid "[WARNING_NOTCL] Save Gerber source file cancelled."
msgstr "[WARNING_NOTCL] Save Gerber source file cancelled."

#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:5604
msgid ""
"[WARNING_NOTCL] No object selected. Please select an Excellon object to "
"export."
msgstr ""
"[WARNING_NOTCL] No object selected. Please select an Excellon object to "
"export."

#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:5609
#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:5648
msgid ""
"[ERROR_NOTCL] Failed. Only Excellon objects can be saved as Excellon files..."
msgstr ""
"[ERROR_NOTCL] Failed. Only Excellon objects can be saved as Excellon files..."

#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:5617
#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:5621
msgid "Save Excellon source file"
msgstr "Save Excellon source file"

#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:5626
msgid "[WARNING_NOTCL] Saving Excellon source file cancelled."
msgstr "[WARNING_NOTCL] Saving Excellon source file cancelled."

#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:5643
msgid ""
"[WARNING_NOTCL] No object selected. Please Select an Excellon object to "
"export."
msgstr ""
"[WARNING_NOTCL] No object selected. Please Select an Excellon object to "
"export."

#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:5656
#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:5660
msgid "Export Excellon"
msgstr "Export Excellon"

#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:5665
msgid "[WARNING_NOTCL]Export Excellon cancelled."
msgstr "[WARNING_NOTCL]Export Excellon cancelled."

#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:5693
msgid "[ERROR_NOTCL] Only Geometry objects can be used."
msgstr "[ERROR_NOTCL] Only Geometry objects can be used."

#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:5706
#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:5710
msgid "Export DXF"
msgstr "Export DXF"

#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:5715
msgid "[WARNING_NOTCL] Export DXF cancelled."
msgstr "[WARNING_NOTCL] Export DXF cancelled."

#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:5733
#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:5736
msgid "Import SVG"
msgstr "Import SVG"

#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:5744
msgid "[WARNING_NOTCL] Open SVG cancelled."
msgstr "[WARNING_NOTCL] Open SVG cancelled."

#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:5763
#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:5766
msgid "Import DXF"
msgstr "Import DXF"

#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:5774
msgid "[WARNING_NOTCL]Open DXF cancelled."
msgstr "[WARNING_NOTCL]Open DXF cancelled."

#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:5792
#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:5795
msgid "Open TCL script"
msgstr "Open TCL script"

#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:5803
msgid "[WARNING_NOTCL]Open TCL script cancelled."
msgstr "[WARNING_NOTCL]Open TCL script cancelled."

#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:5851
#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:5855
msgid "Save Project As ..."
msgstr "Save Project As ..."

#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:5852
msgid "%s/Project_%s"
msgstr "%s/Project_%s"

#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:5860
msgid "[WARNING_NOTCL] Save Project cancelled."
msgstr "[WARNING_NOTCL] Save Project cancelled."

#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:5905
msgid "Exporting SVG"
msgstr "Exporting SVG"

#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:5938
#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:6043
#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:6157
msgid "[success] SVG file exported to %s"
msgstr "[success] SVG file exported to %s"

#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:5969
#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:6089
msgid "[WARNING_NOTCL]No object Box. Using instead %s"
msgstr "[WARNING_NOTCL]No object Box. Using instead %s"

#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:6046
#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:6160
msgid "Generating Film ... Please wait."
msgstr "Generating Film ... Please wait."

#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:6307
msgid "[success] Excellon file exported to %s"
msgstr "[success] Excellon file exported to %s"

#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:6314
msgid "Exporting Excellon"
msgstr "Exporting Excellon"

#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:6319
#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:6326
msgid "[ERROR_NOTCL] Could not export Excellon file."
msgstr "[ERROR_NOTCL] Could not export Excellon file."

#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:6365
msgid "[success] DXF file exported to %s"
msgstr "[success] DXF file exported to %s"

#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:6371
msgid "Exporting DXF"
msgstr "Exporting DXF"

#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:6376
#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:6383
msgid "[[WARNING_NOTCL]] Could not export DXF file."
msgstr "[[WARNING_NOTCL]] Could not export DXF file."

#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:6403
#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:6445
#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:6486
msgid ""
"[ERROR_NOTCL] Not supported type is picked as parameter. Only Geometry and "
"Gerber are supported"
msgstr ""
"[ERROR_NOTCL] Not supported type is picked as parameter. Only Geometry and "
"Gerber are supported"

#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:6413
msgid "Importing SVG"
msgstr "Importing SVG"

#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:6424
#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:6466
#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:6506
#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:6582
#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:6649
#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:6714
msgid "[success] Opened: %s"
msgstr "[success] Opened: %s"

#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:6455
msgid "Importing DXF"
msgstr "Importing DXF"

#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:6494
msgid "Importing Image"
msgstr "Importing Image"

#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:6535
#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:6537
msgid "[ERROR_NOTCL] Failed to open file: %s"
msgstr "[ERROR_NOTCL] Failed to open file: %s"

#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:6540
msgid "[ERROR_NOTCL] Failed to parse file: %s. %s"
msgstr "[ERROR_NOTCL] Failed to parse file: %s. %s"

#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:6546
#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:5802
#: D:\1.DEV\FlatCAM_beta\FlatCAMObj.py:4104
msgid "[ERROR] An internal error has ocurred. See shell.\n"
msgstr "[ERROR] An internal error has ocurred. See shell.\n"

#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:6555
msgid ""
"[ERROR_NOTCL] Object is not Gerber file or empty. Aborting object creation."
msgstr ""
"[ERROR_NOTCL] Object is not Gerber file or empty. Aborting object creation."

#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:6563
msgid "Opening Gerber"
msgstr "Opening Gerber"

#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:6573
msgid "[ERROR_NOTCL] Open Gerber failed. Probable not a Gerber file."
msgstr "[ERROR_NOTCL] Open Gerber failed. Probable not a Gerber file."

#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:6608
msgid "[ERROR_NOTCL] This is not Excellon file."
msgstr "[ERROR_NOTCL] This is not Excellon file."

#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:6611
msgid "[ERROR_NOTCL] Cannot open file: %s"
msgstr "[ERROR_NOTCL] Cannot open file: %s"

#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:6616
msgid "[ERROR_NOTCL] An internal error has occurred. See shell.\n"
msgstr "[ERROR_NOTCL] An internal error has occurred. See shell.\n"

#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:6632
msgid "[ERROR_NOTCL] No geometry found in file: %s"
msgstr "[ERROR_NOTCL] No geometry found in file: %s"

#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:6635
msgid "Opening Excellon."
msgstr "Opening Excellon."

#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:6642
msgid "[ERROR_NOTCL] Open Excellon file failed. Probable not an Excellon file."
msgstr ""
"[ERROR_NOTCL] Open Excellon file failed. Probable not an Excellon file."

#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:6681
msgid "[ERROR_NOTCL] Failed to open %s"
msgstr "[ERROR_NOTCL] Failed to open %s"

#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:6691
msgid "[ERROR_NOTCL] This is not GCODE"
msgstr "[ERROR_NOTCL] This is not GCODE"

#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:6697
msgid "Opening G-Code."
msgstr "Opening G-Code."

#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:6705
msgid ""
"[ERROR_NOTCL] Failed to create CNCJob Object. Probable not a GCode file.\n"
" Attempting to create a FlatCAM CNCJob Object from G-Code file failed during "
"processing"
msgstr ""
"[ERROR_NOTCL] Failed to create CNCJob Object. Probable not a GCode file.\n"
" Attempting to create a FlatCAM CNCJob Object from G-Code file failed during "
"processing"

#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:6745
msgid "[ERROR_NOTCL] Failed to open config file: %s"
msgstr "[ERROR_NOTCL] Failed to open config file: %s"

#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:6770
#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:6787
msgid "[ERROR_NOTCL] Failed to open project file: %s"
msgstr "[ERROR_NOTCL] Failed to open project file: %s"

#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:6777
msgid "[ERROR_NOTCL] Failed to parse project file: %s"
msgstr "[ERROR_NOTCL] Failed to parse project file: %s"

#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:6813
msgid "[success] Project loaded from: %s"
msgstr "[success] Project loaded from: %s"

#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:6943
msgid "Available commands:\n"
msgstr "Available commands:\n"

#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:6945
msgid ""
"\n"
"\n"
"Type help <command_name> for usage.\n"
" Example: help open_gerber"
msgstr ""
"\n"
"\n"
"Type help <command_name> for usage.\n"
" Example: help open_gerber"

#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:7093
msgid "Shows list of commands."
msgstr "Shows list of commands."

#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:7146
msgid "[ERROR_NOTCL] Failed to load recent item list."
msgstr "[ERROR_NOTCL] Failed to load recent item list."

#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:7153
msgid "[ERROR_NOTCL] Failed to parse recent item list."
msgstr "[ERROR_NOTCL] Failed to parse recent item list."

#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:7214
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:856
msgid "<b>Shortcut Key List</b>"
msgstr "<b>Shortcut Key List</b>"

#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:7221
msgid ""
"\n"
"<p><span style=\"font-size:14px\"><strong>Selected Tab - Choose an Item from "
"Project Tab</strong></span></p>\n"
"\n"
"<p><span style=\"font-size:10px\"><strong>Details</strong>:<br />\n"
"The normal flow when working in FlatCAM is the following:</span></p>\n"
"\n"
"<ol>\n"
"\t<li><span style=\"font-size:10px\">Loat/Import a Gerber, Excellon, Gcode, "
"DXF, Raster Image or SVG file into FlatCAM using either the menu&#39;s, "
"toolbars, key shortcuts or even dragging and dropping the files on the GUI."
"<br />\n"
"\t<br />\n"
"\tYou can also load a <strong>FlatCAM project</strong> by double clicking on "
"the project file, drag &amp; drop of the file into the FLATCAM GUI or "
"through the menu/toolbar links offered within the app.</span><br />\n"
"\t&nbsp;</li>\n"
"\t<li><span style=\"font-size:10px\">Once an object is available in the "
"Project Tab, by selecting it and then focusing on <strong>SELECTED TAB </"
"strong>(more simpler is to double click the object name in the Project Tab), "
"<strong>SELECTED TAB </strong>will be updated with the object properties "
"according to it&#39;s kind: Gerber, Excellon, Geometry or CNCJob object.<br /"
">\n"
"\t<br />\n"
"\tIf the selection of the object is done on the canvas by single click "
"instead, and the <strong>SELECTED TAB</strong> is in focus, again the object "
"properties will be displayed into the Selected Tab. Alternatively, double "
"clicking on the object on the canvas will bring the <strong>SELECTED TAB</"
"strong> and populate it even if it was out of focus.<br />\n"
"\t<br />\n"
"\tYou can change the parameters in this screen and the flow direction is "
"like this:<br />\n"
"\t<br />\n"
"\t<strong>Gerber/Excellon Object</strong> -&gt; Change Param -&gt; Generate "
"Geometry -&gt;<strong> Geometry Object </strong>-&gt; Add tools (change "
"param in Selected Tab) -&gt; Generate CNCJob -&gt;<strong> CNCJob Object </"
"strong>-&gt; Verify GCode (through Edit CNC Code) and/or append/prepend to "
"GCode (again, done in <strong>SELECTED TAB)&nbsp;</strong>-&gt; Save GCode</"
"span></li>\n"
"</ol>\n"
"\n"
"<p><span style=\"font-size:10px\">A list of key shortcuts is available "
"through an menu entry in <strong>Help -&gt; Shortcuts List</strong>&nbsp;or "
"through it&#39;s own key shortcut: <strng>F3</strong>.</span></p>\n"
"\n"
"        "
msgstr ""
"\n"
"<p><span style=\"font-size:14px\"><strong>Selected Tab - Choose an Item from "
"Project Tab</strong></span></p>\n"
"\n"
"<p><span style=\"font-size:10px\"><strong>Details</strong>:<br />\n"
"The normal flow when working in FlatCAM is the following:</span></p>\n"
"\n"
"<ol>\n"
"\t<li><span style=\"font-size:10px\">Loat/Import a Gerber, Excellon, Gcode, "
"DXF, Raster Image or SVG file into FlatCAM using either the menu&#39;s, "
"toolbars, key shortcuts or even dragging and dropping the files on the GUI."
"<br />\n"
"\t<br />\n"
"\tYou can also load a <strong>FlatCAM project</strong> by double clicking on "
"the project file, drag &amp; drop of the file into the FLATCAM GUI or "
"through the menu/toolbar links offered within the app.</span><br />\n"
"\t&nbsp;</li>\n"
"\t<li><span style=\"font-size:10px\">Once an object is available in the "
"Project Tab, by selecting it and then focusing on <strong>SELECTED TAB </"
"strong>(more simpler is to double click the object name in the Project Tab), "
"<strong>SELECTED TAB </strong>will be updated with the object properties "
"according to it&#39;s kind: Gerber, Excellon, Geometry or CNCJob object.<br /"
">\n"
"\t<br />\n"
"\tIf the selection of the object is done on the canvas by single click "
"instead, and the <strong>SELECTED TAB</strong> is in focus, again the object "
"properties will be displayed into the Selected Tab. Alternatively, double "
"clicking on the object on the canvas will bring the <strong>SELECTED TAB</"
"strong> and populate it even if it was out of focus.<br />\n"
"\t<br />\n"
"\tYou can change the parameters in this screen and the flow direction is "
"like this:<br />\n"
"\t<br />\n"
"\t<strong>Gerber/Excellon Object</strong> -&gt; Change Param -&gt; Generate "
"Geometry -&gt;<strong> Geometry Object </strong>-&gt; Add tools (change "
"param in Selected Tab) -&gt; Generate CNCJob -&gt;<strong> CNCJob Object </"
"strong>-&gt; Verify GCode (through Edit CNC Code) and/or append/prepend to "
"GCode (again, done in <strong>SELECTED TAB)&nbsp;</strong>-&gt; Save GCode</"
"span></li>\n"
"</ol>\n"
"\n"
"<p><span style=\"font-size:10px\">A list of key shortcuts is available "
"through an menu entry in <strong>Help -&gt; Shortcuts List</strong>&nbsp;or "
"through it&#39;s own key shortcut: <strng>F3</strong>.</span></p>\n"
"\n"
"        "

#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:7325
msgid "[WARNING_NOTCL] Failed checking for latest version. Could not connect."
msgstr "[WARNING_NOTCL] Failed checking for latest version. Could not connect."

#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:7332
msgid "[ERROR_NOTCL] Could not parse information about latest version."
msgstr "[ERROR_NOTCL] Could not parse information about latest version."

#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:7342
msgid "[success] FlatCAM is up to date!"
msgstr "[success] FlatCAM is up to date!"

#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:7347
msgid "Newer Version Available"
msgstr "Newer Version Available"

#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:7348
msgid ""
"There is a newer version of FlatCAM available for download:\n"
"\n"
msgstr ""
"There is a newer version of FlatCAM available for download:\n"
"\n"

#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:7350
msgid "info"
msgstr "info"

#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:7369
msgid "[success]All plots disabled."
msgstr "[success]All plots disabled."

#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:7375
msgid "[success]All non selected plots disabled."
msgstr "[success]All non selected plots disabled."

#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:7381
msgid "[success]All plots enabled."
msgstr "[success]All plots enabled."

#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:7491
msgid "Saving FlatCAM Project"
msgstr "Saving FlatCAM Project"

#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:7512
#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:7543
msgid "[success] Project saved to: %s"
msgstr "[success] Project saved to: %s"

#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:7530
msgid "[ERROR_NOTCL] Failed to verify project file: %s. Retry to save it."
msgstr "[ERROR_NOTCL] Failed to verify project file: %s. Retry to save it."

#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:7537
msgid "[ERROR_NOTCL] Failed to parse saved project file: %s. Retry to save it."
msgstr ""
"[ERROR_NOTCL] Failed to parse saved project file: %s. Retry to save it."

#: D:\1.DEV\FlatCAM_beta\FlatCAMApp.py:7545
msgid "[ERROR_NOTCL] Failed to save project file: %s. Retry to save it."
msgstr "[ERROR_NOTCL] Failed to save project file: %s. Retry to save it."

#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:76
msgid "Buffer distance:"
msgstr "Buffer distance:"

#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:77
msgid "Buffer corner:"
msgstr "Buffer corner:"

#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:79
msgid ""
"There are 3 types of corners:\n"
" - 'Round': the corner is rounded for exterior buffer.\n"
" - 'Square:' the corner is met in a sharp angle for exterior buffer.\n"
" - 'Beveled:' the corner is a line that directly connects the features "
"meeting in the corner"
msgstr ""
"There are 3 types of corners:\n"
" - 'Round': the corner is rounded for exterior buffer.\n"
" - 'Square:' the corner is met in a sharp angle for exterior buffer.\n"
" - 'Beveled:' the corner is a line that directly connects the features "
"meeting in the corner"

#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:85
msgid "Round"
msgstr "Round"

#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:86
msgid "Square"
msgstr "Square"

#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:87
msgid "Beveled"
msgstr "Beveled"

#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:94
msgid "Buffer Interior"
msgstr "Buffer Interior"

#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:96
msgid "Buffer Exterior"
msgstr "Buffer Exterior"

#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:102
msgid "Full Buffer"
msgstr "Full Buffer"

#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:123
#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:2623
msgid "Buffer Tool"
msgstr "Buffer Tool"

#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:134
#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:151
#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:168
#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:2641
#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:2667
#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:2693
msgid ""
"[WARNING_NOTCL] Buffer distance value is missing or wrong format. Add it and "
"retry."
msgstr ""
"[WARNING_NOTCL] Buffer distance value is missing or wrong format. Add it and "
"retry."

#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:416
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:3402
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:4608
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:4884
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:5015
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:330
msgid "Tool dia:"
msgstr "Tool dia:"

#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:418
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:5017
msgid ""
"Diameter of the tool to\n"
"be used in the operation."
msgstr ""
"Diameter of the tool to\n"
"be used in the operation."

#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:427
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:4790
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:5026
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolNonCopperClear.py:164
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolPaint.py:160
msgid "Overlap:"
msgstr "Overlap:"

#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:429
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolPaint.py:162
msgid ""
"How much (fraction) of the tool width to overlap each tool pass.\n"
"Example:\n"
"A value here of 0.25 means 25% from the tool diameter found above.\n"
"\n"
"Adjust the value starting with lower values\n"
"and increasing it if areas that should be painted are still \n"
"not painted.\n"
"Lower values = faster processing, faster execution on PCB.\n"
"Higher values = slow processing and slow execution on CNC\n"
"due of too many paths."
msgstr ""
"How much (fraction) of the tool width to overlap each tool pass.\n"
"Example:\n"
"A value here of 0.25 means 25% from the tool diameter found above.\n"
"\n"
"Adjust the value starting with lower values\n"
"and increasing it if areas that should be painted are still \n"
"not painted.\n"
"Lower values = faster processing, faster execution on PCB.\n"
"Higher values = slow processing and slow execution on CNC\n"
"due of too many paths."

#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:445
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:4806
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:4892
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:5036
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolCutOut.py:86
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolNonCopperClear.py:180
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolPaint.py:177
msgid "Margin:"
msgstr "Margin:"

#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:447
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:5038
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolPaint.py:179
msgid ""
"Distance by which to avoid\n"
"the edges of the polygon to\n"
"be painted."
msgstr ""
"Distance by which to avoid\n"
"the edges of the polygon to\n"
"be painted."

#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:456
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:4815
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:5047
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolNonCopperClear.py:189
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolPaint.py:188
msgid "Method:"
msgstr "Method:"

#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:458
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:5049
msgid ""
"Algorithm to paint the polygon:<BR><B>Standard</B>: Fixed step inwards."
"<BR><B>Seed-based</B>: Outwards from seed."
msgstr ""
"Algorithm to paint the polygon:<BR><B>Standard</B>: Fixed step inwards."
"<BR><B>Seed-based</B>: Outwards from seed."

#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:464
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:4824
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:5055
msgid "Standard"
msgstr "Standard"

#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:465
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:4825
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:5056
msgid "Seed-based"
msgstr "Seed-based"

#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:466
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:4826
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:5057
msgid "Straight lines"
msgstr "Straight lines"

#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:471
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:4831
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:5062
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolNonCopperClear.py:205
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolPaint.py:204
msgid "Connect:"
msgstr "Connect:"

#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:473
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:4833
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:5064
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolNonCopperClear.py:207
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolPaint.py:206
msgid ""
"Draw lines between resulting\n"
"segments to minimize tool lifts."
msgstr ""
"Draw lines between resulting\n"
"segments to minimize tool lifts."

#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:480
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:4840
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:5072
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolNonCopperClear.py:214
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolPaint.py:213
msgid "Contour:"
msgstr "Contour:"

#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:482
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:4842
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:5074
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolNonCopperClear.py:216
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolPaint.py:215
msgid ""
"Cut around the perimeter of the polygon\n"
"to trim rough edges."
msgstr ""
"Cut around the perimeter of the polygon\n"
"to trim rough edges."

#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:494
msgid "Paint"
msgstr "Paint"

#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:512
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:575
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:1624
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:1378
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolPaint.py:337
msgid "Paint Tool"
msgstr "Paint Tool"

#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:548
msgid "[WARNING_NOTCL] Paint cancelled. No shape selected."
msgstr "[WARNING_NOTCL] Paint cancelled. No shape selected."

#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:559
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolCutOut.py:340
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolCutOut.py:478
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolCutOut.py:598
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolCutOut.py:703
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolDblSided.py:350
msgid ""
"[WARNING_NOTCL] Tool diameter value is missing or wrong format. Add it and "
"retry."
msgstr ""
"[WARNING_NOTCL] Tool diameter value is missing or wrong format. Add it and "
"retry."

#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:570
msgid ""
"[WARNING_NOTCL] Overlap value is missing or wrong format. Add it and retry."
msgstr ""
"[WARNING_NOTCL] Overlap value is missing or wrong format. Add it and retry."

#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:582
msgid ""
"[WARNING_NOTCL] Margin distance value is missing or wrong format. Add it and "
"retry."
msgstr ""
"[WARNING_NOTCL] Margin distance value is missing or wrong format. Add it and "
"retry."

#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:591
#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:2648
#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:2674
#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:2700
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolNonCopperClear.py:803
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolProperties.py:101
msgid "Tools"
msgstr "Tools"

#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:602
#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:975
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:584
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:1635
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolTransform.py:395
msgid "Transform Tool"
msgstr "Transform Tool"

#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:603
#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:664
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolTransform.py:24
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolTransform.py:82
msgid "Rotate"
msgstr "Rotate"

#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:604
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolTransform.py:25
msgid "Skew/Shear"
msgstr "Skew/Shear"

#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:605
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:99
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:264
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolTransform.py:26
msgid "Scale"
msgstr "Scale"

#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:606
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolTransform.py:27
msgid "Mirror (Flip)"
msgstr "Mirror (Flip)"

#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:607
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:126
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:958
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:1516
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolTransform.py:28
msgid "Offset"
msgstr "Offset"

#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:618
msgid "Editor %s"
msgstr "Editor %s"

#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:650
#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:4851
#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:4887
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolTransform.py:68
msgid "Angle:"
msgstr "Angle:"

#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:652
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolTransform.py:70
msgid ""
"Angle for Rotation action, in degrees.\n"
"Float number between -360 and 359.\n"
"Positive numbers for CW motion.\n"
"Negative numbers for CCW motion."
msgstr ""
"Angle for Rotation action, in degrees.\n"
"Float number between -360 and 359.\n"
"Positive numbers for CW motion.\n"
"Negative numbers for CCW motion."

#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:666
msgid ""
"Rotate the selected shape(s).\n"
"The point of reference is the middle of\n"
"the bounding box for all selected shapes."
msgstr ""
"Rotate the selected shape(s).\n"
"The point of reference is the middle of\n"
"the bounding box for all selected shapes."

#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:689
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolTransform.py:107
msgid "Angle X:"
msgstr "Angle X:"

#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:691
#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:709
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolTransform.py:109
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolTransform.py:127
msgid ""
"Angle for Skew action, in degrees.\n"
"Float number between -360 and 359."
msgstr ""
"Angle for Skew action, in degrees.\n"
"Float number between -360 and 359."

#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:700
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolTransform.py:118
msgid "Skew X"
msgstr "Skew X"

#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:702
#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:720
msgid ""
"Skew/shear the selected shape(s).\n"
"The point of reference is the middle of\n"
"the bounding box for all selected shapes."
msgstr ""
"Skew/shear the selected shape(s).\n"
"The point of reference is the middle of\n"
"the bounding box for all selected shapes."

#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:707
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolTransform.py:125
msgid "Angle Y:"
msgstr "Angle Y:"

#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:718
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolTransform.py:136
msgid "Skew Y"
msgstr "Skew Y"

#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:746
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolTransform.py:164
msgid "Factor X:"
msgstr "Factor X:"

#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:748
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolTransform.py:166
msgid "Factor for Scale action over X axis."
msgstr "Factor for Scale action over X axis."

#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:756
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolTransform.py:174
msgid "Scale X"
msgstr "Scale X"

#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:758
#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:775
msgid ""
"Scale the selected shape(s).\n"
"The point of reference depends on \n"
"the Scale reference checkbox state."
msgstr ""
"Scale the selected shape(s).\n"
"The point of reference depends on \n"
"the Scale reference checkbox state."

#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:763
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolTransform.py:181
msgid "Factor Y:"
msgstr "Factor Y:"

#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:765
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolTransform.py:183
msgid "Factor for Scale action over Y axis."
msgstr "Factor for Scale action over Y axis."

#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:773
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolTransform.py:191
msgid "Scale Y"
msgstr "Scale Y"

#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:782
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:5421
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolTransform.py:200
msgid "Link"
msgstr "Link"

#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:784
msgid ""
"Scale the selected shape(s)\n"
"using the Scale Factor X for both axis."
msgstr ""
"Scale the selected shape(s)\n"
"using the Scale Factor X for both axis."

#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:790
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:5429
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolTransform.py:208
msgid "Scale Reference"
msgstr "Scale Reference"

#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:792
msgid ""
"Scale the selected shape(s)\n"
"using the origin reference when checked,\n"
"and the center of the biggest bounding box\n"
"of the selected shapes when unchecked."
msgstr ""
"Scale the selected shape(s)\n"
"using the origin reference when checked,\n"
"and the center of the biggest bounding box\n"
"of the selected shapes when unchecked."

#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:820
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolTransform.py:238
msgid "Value X:"
msgstr "Value X:"

#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:822
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolTransform.py:240
msgid "Value for Offset action on X axis."
msgstr "Value for Offset action on X axis."

#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:830
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolTransform.py:248
msgid "Offset X"
msgstr "Offset X"

#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:832
#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:850
msgid ""
"Offset the selected shape(s).\n"
"The point of reference is the middle of\n"
"the bounding box for all selected shapes.\n"
msgstr ""
"Offset the selected shape(s).\n"
"The point of reference is the middle of\n"
"the bounding box for all selected shapes.\n"

#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:838
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolTransform.py:255
msgid "Value Y:"
msgstr "Value Y:"

#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:840
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolTransform.py:257
msgid "Value for Offset action on Y axis."
msgstr "Value for Offset action on Y axis."

#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:848
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolTransform.py:265
msgid "Offset Y"
msgstr "Offset Y"

#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:879
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolTransform.py:295
msgid "Flip on X"
msgstr "Flip on X"

#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:881
#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:889
msgid ""
"Flip the selected shape(s) over the X axis.\n"
"Does not create a new shape."
msgstr ""
"Flip the selected shape(s) over the X axis.\n"
"Does not create a new shape."

#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:887
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolTransform.py:303
msgid "Flip on Y"
msgstr "Flip on Y"

#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:896
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolTransform.py:312
msgid "Ref Pt"
msgstr "Ref Pt"

#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:898
msgid ""
"Flip the selected shape(s)\n"
"around the point in Point Entry Field.\n"
"\n"
"The point coordinates can be captured by\n"
"left click on canvas together with pressing\n"
"SHIFT key. \n"
"Then click Add button to insert coordinates.\n"
"Or enter the coords in format (x, y) in the\n"
"Point Entry field and click Flip on X(Y)"
msgstr ""
"Flip the selected shape(s)\n"
"around the point in Point Entry Field.\n"
"\n"
"The point coordinates can be captured by\n"
"left click on canvas together with pressing\n"
"SHIFT key. \n"
"Then click Add button to insert coordinates.\n"
"Or enter the coords in format (x, y) in the\n"
"Point Entry field and click Flip on X(Y)"

#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:910
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolTransform.py:325
msgid "Point:"
msgstr "Point:"

#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:912
msgid ""
"Coordinates in format (x, y) used as reference for mirroring.\n"
"The 'x' in (x, y) will be used when using Flip on X and\n"
"the 'y' in (x, y) will be used when using Flip on Y."
msgstr ""
"Coordinates in format (x, y) used as reference for mirroring.\n"
"The 'x' in (x, y) will be used when using Flip on X and\n"
"the 'y' in (x, y) will be used when using Flip on Y."

#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:922
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:1058
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolDblSided.py:152
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolDblSided.py:200
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolNonCopperClear.py:133
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolPaint.py:131
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolSolderPaste.py:115
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolSolderPaste.py:475
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolTransform.py:337
msgid "Add"
msgstr "Add"

#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:924
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolTransform.py:339
msgid ""
"The point coordinates can be captured by\n"
"left click on canvas together with pressing\n"
"SHIFT key. Then click Add button to insert."
msgstr ""
"The point coordinates can be captured by\n"
"left click on canvas together with pressing\n"
"SHIFT key. Then click Add button to insert."

#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:1039
msgid "[WARNING_NOTCL] Transformation cancelled. No shape selected."
msgstr "[WARNING_NOTCL] Transformation cancelled. No shape selected."

#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:1060
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolTransform.py:465
msgid "[ERROR_NOTCL]Wrong value format entered for Rotate, use a number."
msgstr "[ERROR_NOTCL]Wrong value format entered for Rotate, use a number."

#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:1097
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolTransform.py:499
msgid "[ERROR_NOTCL]Wrong value format entered for Skew X, use a number."
msgstr "[ERROR_NOTCL]Wrong value format entered for Skew X, use a number."

#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:1118
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolTransform.py:517
msgid "[ERROR_NOTCL]Wrong value format entered for Skew Y, use a number."
msgstr "[ERROR_NOTCL]Wrong value format entered for Skew Y, use a number."

#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:1139
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolTransform.py:535
msgid "[ERROR_NOTCL]Wrong value format entered for Scale X, use a number."
msgstr "[ERROR_NOTCL]Wrong value format entered for Scale X, use a number."

#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:1176
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolTransform.py:569
msgid "[ERROR_NOTCL]Wrong value format entered for Scale Y, use a number."
msgstr "[ERROR_NOTCL]Wrong value format entered for Scale Y, use a number."

#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:1208
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolTransform.py:598
msgid "[ERROR_NOTCL]Wrong value format entered for Offset X, use a number."
msgstr "[ERROR_NOTCL]Wrong value format entered for Offset X, use a number."

#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:1229
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolTransform.py:616
msgid "[ERROR_NOTCL]Wrong value format entered for Offset Y, use a number."
msgstr "[ERROR_NOTCL]Wrong value format entered for Offset Y, use a number."

#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:1247
msgid "[WARNING_NOTCL] No shape selected. Please Select a shape to rotate!"
msgstr "[WARNING_NOTCL] No shape selected. Please Select a shape to rotate!"

#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:1250
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolTransform.py:637
msgid "Appying Rotate"
msgstr "Appying Rotate"

#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:1278
msgid "[success] Done. Rotate completed."
msgstr "[success] Done. Rotate completed."

#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:1294
msgid "[WARNING_NOTCL] No shape selected. Please Select a shape to flip!"
msgstr "[WARNING_NOTCL] No shape selected. Please Select a shape to flip!"

#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:1297
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolTransform.py:689
msgid "Applying Flip"
msgstr "Applying Flip"

#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:1327
msgid "[success] Flip on the Y axis done ..."
msgstr "[success] Flip on the Y axis done ..."

#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:1330
msgid "[success] Flip on the X axis done ..."
msgstr "[success] Flip on the X axis done ..."

#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:1349
msgid "[WARNING_NOTCL] No shape selected. Please Select a shape to shear/skew!"
msgstr ""
"[WARNING_NOTCL] No shape selected. Please Select a shape to shear/skew!"

#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:1352
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolTransform.py:759
msgid "Applying Skew"
msgstr "Applying Skew"

#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:1377
msgid "[success] Skew on the %s axis done ..."
msgstr "[success] Skew on the %s axis done ..."

#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:1381
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolTransform.py:794
msgid "[ERROR_NOTCL] Due of %s, Skew action was not executed."
msgstr "[ERROR_NOTCL] Due of %s, Skew action was not executed."

#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:1392
msgid "[WARNING_NOTCL] No shape selected. Please Select a shape to scale!"
msgstr "[WARNING_NOTCL] No shape selected. Please Select a shape to scale!"

#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:1395
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolTransform.py:808
msgid "Applying Scale"
msgstr "Applying Scale"

#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:1428
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolTransform.py:846
msgid "[success] Scale on the %s axis done ..."
msgstr "[success] Scale on the %s axis done ..."

#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:1431
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolTransform.py:849
msgid "[ERROR_NOTCL] Due of %s, Scale action was not executed."
msgstr "[ERROR_NOTCL] Due of %s, Scale action was not executed."

#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:1440
msgid "[WARNING_NOTCL] No shape selected. Please Select a shape to offset!"
msgstr "[WARNING_NOTCL] No shape selected. Please Select a shape to offset!"

#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:1443
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolTransform.py:861
msgid "Applying Offset"
msgstr "Applying Offset"

#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:1467
msgid "[success] Offset on the %s axis done ..."
msgstr "[success] Offset on the %s axis done ..."

#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:1471
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolTransform.py:895
msgid "[ERROR_NOTCL] Due of %s, Offset action was not executed."
msgstr "[ERROR_NOTCL] Due of %s, Offset action was not executed."

#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:1475
msgid "Rotate ..."
msgstr "Rotate ..."

#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:1476
#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:1533
#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:1550
msgid "Enter an Angle Value (degrees):"
msgstr "Enter an Angle Value (degrees):"

#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:1485
msgid "[success] Geometry shape rotate done..."
msgstr "[success] Geometry shape rotate done..."

#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:1490
msgid "[WARNING_NOTCL] Geometry shape rotate cancelled..."
msgstr "[WARNING_NOTCL] Geometry shape rotate cancelled..."

#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:1496
msgid "Offset on X axis ..."
msgstr "Offset on X axis ..."

#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:1497
#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:1516
msgid "Enter a distance Value (%s):"
msgstr "Enter a distance Value (%s):"

#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:1506
msgid "[success] Geometry shape offset on X axis done..."
msgstr "[success] Geometry shape offset on X axis done..."

#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:1510
msgid "[WARNING_NOTCL] Geometry shape offset X cancelled..."
msgstr "[WARNING_NOTCL] Geometry shape offset X cancelled..."

#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:1515
msgid "Offset on Y axis ..."
msgstr "Offset on Y axis ..."

#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:1525
msgid "[success] Geometry shape offset on Y axis done..."
msgstr "[success] Geometry shape offset on Y axis done..."

#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:1529
msgid "[WARNING_NOTCL] Geometry shape offset Y cancelled..."
msgstr "[WARNING_NOTCL] Geometry shape offset Y cancelled..."

#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:1532
msgid "Skew on X axis ..."
msgstr "Skew on X axis ..."

#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:1542
msgid "[success] Geometry shape skew on X axis done..."
msgstr "[success] Geometry shape skew on X axis done..."

#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:1546
msgid "[WARNING_NOTCL] Geometry shape skew X cancelled..."
msgstr "[WARNING_NOTCL] Geometry shape skew X cancelled..."

#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:1549
msgid "Skew on Y axis ..."
msgstr "Skew on Y axis ..."

#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:1559
msgid "[success] Geometry shape skew on Y axis done..."
msgstr "[success] Geometry shape skew on Y axis done..."

#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:1563
msgid "[WARNING_NOTCL] Geometry shape skew Y cancelled..."
msgstr "[WARNING_NOTCL] Geometry shape skew Y cancelled..."

#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:1894
#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:1933
msgid "Click on CENTER ..."
msgstr "Click on CENTER ..."

#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:1901
msgid "Click on Circle perimeter point to complete ..."
msgstr "Click on Circle perimeter point to complete ..."

#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:1925
msgid "[success]Done. Adding Circle completed."
msgstr "[success]Done. Adding Circle completed."

#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:1952
msgid "Click on Start arc point ..."
msgstr "Click on Start arc point ..."

#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:1956
msgid "Click on End arc point to complete ..."
msgstr "Click on End arc point to complete ..."

#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:2111
msgid "[success]Done. Arc completed."
msgstr "[success]Done. Arc completed."

#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:2123
msgid "Click on 1st corner ..."
msgstr "Click on 1st corner ..."

#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:2163
msgid "Click on 1st point ..."
msgstr "Click on 1st point ..."

#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:2170
msgid "Click on next Point or click Right mouse button to complete ..."
msgstr "Click on next Point or click Right mouse button to complete ..."

#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:2193
msgid "[success]Done. Polygon completed."
msgstr "[success]Done. Polygon completed."

#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:2212
msgid "[success]Done. Path completed."
msgstr "[success]Done. Path completed."

#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:2472
#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:4034
msgid "[WARNING_NOTCL] Move cancelled. No shape selected."
msgstr "[WARNING_NOTCL] Move cancelled. No shape selected."

#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:2476
msgid "Click on reference point."
msgstr "Click on reference point."

#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:2479
msgid "Click on destination point."
msgstr "Click on destination point."

#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:2510
msgid "[success]Done. Geometry(s) Move completed."
msgstr "[success]Done. Geometry(s) Move completed."

#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:2555
msgid "[success]Done. Geometry(s) Copy completed."
msgstr "[success]Done. Geometry(s) Copy completed."

#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:2567
msgid "Click on the Destination point..."
msgstr "Click on the Destination point..."

#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:2581
msgid ""
"[ERROR]Font not supported. Only Regular, Bold, Italic and BoldItalic are "
"supported. Error: %s"
msgstr ""
"[ERROR]Font not supported. Only Regular, Bold, Italic and BoldItalic are "
"supported. Error: %s"

#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:2591
msgid "[success]Done. Adding Text completed."
msgstr "[success]Done. Adding Text completed."

#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:2619
msgid "Create buffer geometry ..."
msgstr "Create buffer geometry ..."

#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:2630
#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:2656
#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:2682
msgid "[WARNING_NOTCL] Buffer cancelled. No shape selected."
msgstr "[WARNING_NOTCL] Buffer cancelled. No shape selected."

#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:2652
msgid "[success]Done. Buffer Tool completed."
msgstr "[success]Done. Buffer Tool completed."

#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:2678
msgid "[success]Done. Buffer Int Tool completed."
msgstr "[success]Done. Buffer Int Tool completed."

#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:2704
msgid "[success]Done. Buffer Ext Tool completed."
msgstr "[success]Done. Buffer Ext Tool completed."

#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:2737
msgid "Create Paint geometry ..."
msgstr "Create Paint geometry ..."

#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:2751
msgid "Shape transformations ..."
msgstr "Shape transformations ..."

#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:2776
msgid "[WARNING_NOTCL] To add a drill first select a tool"
msgstr "[WARNING_NOTCL] To add a drill first select a tool"

#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:2785
#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:2875
#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:3148
#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:3173
msgid "Click on target location ..."
msgstr "Click on target location ..."

#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:2825
msgid "[success]Done. Drill added."
msgstr "[success]Done. Drill added."

#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:2867
msgid "[WARNING_NOTCL] To add an Drill Array first select a tool in Tool Table"
msgstr ""
"[WARNING_NOTCL] To add an Drill Array first select a tool in Tool Table"

#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:2892
msgid "Click on the Drill Circular Array Start position"
msgstr "Click on the Drill Circular Array Start position"

#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:2914
msgid ""
"[ERROR_NOTCL] The value is not Float. Check for comma instead of dot "
"separator."
msgstr ""
"[ERROR_NOTCL] The value is not Float. Check for comma instead of dot "
"separator."

#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:2917
msgid "[ERROR_NOTCL] The value is mistyped. Check the value."
msgstr "[ERROR_NOTCL] The value is mistyped. Check the value."

#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:3010
msgid "[WARNING_NOTCL]Too many drills for the selected spacing angle."
msgstr "[WARNING_NOTCL]Too many drills for the selected spacing angle."

#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:3027
msgid "[success]Done. Drill Array added."
msgstr "[success]Done. Drill Array added."

#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:3038
msgid "Click on the Drill(s) to resize ..."
msgstr "Click on the Drill(s) to resize ..."

#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:3058
msgid ""
"[ERROR_NOTCL]Resize drill(s) failed. Please enter a diameter for resize."
msgstr ""
"[ERROR_NOTCL]Resize drill(s) failed. Please enter a diameter for resize."

#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:3130
msgid "[success]Done. Drill Resize completed."
msgstr "[success]Done. Drill Resize completed."

#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:3150
msgid "Click on reference location ..."
msgstr "Click on reference location ..."

#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:3205
msgid "[success]Done. Drill(s) Move completed."
msgstr "[success]Done. Drill(s) Move completed."

#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:3258
msgid "[success]Done. Drill(s) copied."
msgstr "[success]Done. Drill(s) copied."

#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:3908
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:2114
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:2126
msgid "[success]Done."
msgstr "[success]Done."

#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:4041
msgid "[WARNING_NOTCL] Copy cancelled. No shape selected."
msgstr "[WARNING_NOTCL] Copy cancelled. No shape selected."

#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:4048
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:2406
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:2418
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:2452
msgid "Click on target point."
msgstr "Click on target point."

#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:4289
msgid ""
"[WARNING_NOTCL]A selection of at least 2 geo items is required to do "
"Intersection."
msgstr ""
"[WARNING_NOTCL]A selection of at least 2 geo items is required to do "
"Intersection."

#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:4327
#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:4364
#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:4436
msgid ""
"[ERROR_NOTCL]Negative buffer value is not accepted. Use Buffer interior to "
"generate an 'inside' shape"
msgstr ""
"[ERROR_NOTCL]Negative buffer value is not accepted. Use Buffer interior to "
"generate an 'inside' shape"

#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:4335
#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:4373
#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:4444
msgid "[WARNING_NOTCL] Nothing selected for buffering."
msgstr "[WARNING_NOTCL] Nothing selected for buffering."

#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:4339
#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:4377
#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:4448
msgid "[WARNING_NOTCL] Invalid distance for buffering."
msgstr "[WARNING_NOTCL] Invalid distance for buffering."

#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:4349
#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:4457
msgid ""
"[ERROR_NOTCL]Failed, the result is empty. Choose a different buffer value."
msgstr ""
"[ERROR_NOTCL]Failed, the result is empty. Choose a different buffer value."

#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:4357
msgid "[success]Full buffer geometry created."
msgstr "[success]Full buffer geometry created."

#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:4386
msgid ""
"[ERROR_NOTCL]Failed, the result is empty. Choose a smaller buffer value."
msgstr ""
"[ERROR_NOTCL]Failed, the result is empty. Choose a smaller buffer value."

#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:4398
#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:4469
msgid "[success]Exterior buffer geometry created."
msgstr "[success]Exterior buffer geometry created."

#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:4533
msgid "[WARNING_NOTCL]Nothing selected for painting."
msgstr "[WARNING_NOTCL]Nothing selected for painting."

#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:4539
msgid "[WARNING] Invalid value for {}"
msgstr "[WARNING] Invalid value for {}"

#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:4545
msgid ""
"[ERROR_NOTCL] Could not do Paint. Overlap value has to be less than 1.00 "
"(100%)."
msgstr ""
"[ERROR_NOTCL] Could not do Paint. Overlap value has to be less than 1.00 "
"(100%)."

#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:4604
msgid ""
"[ERROR] Could not do Paint. Try a different combination of parameters. Or a "
"different method of Paint\n"
"%s"
msgstr ""
"[ERROR] Could not do Paint. Try a different combination of parameters. Or a "
"different method of Paint\n"
"%s"

#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:4615
msgid "[success] Paint done."
msgstr "[success] Paint done."

#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:4647
msgid "Excellon Editor"
msgstr "Excellon Editor"

#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:4654
msgid "Name:"
msgstr "Name:"

#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:4674
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolNonCopperClear.py:71
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolPaint.py:69
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolSolderPaste.py:70
msgid "Tools Table"
msgstr "Tools Table"

#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:4676
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:608
msgid ""
"Tools in this Excellon object\n"
"when are used for drilling."
msgstr ""
"Tools in this Excellon object\n"
"when are used for drilling."

#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:4685
#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:5745
#: D:\1.DEV\FlatCAM_beta\FlatCAMObj.py:2203
#: D:\1.DEV\FlatCAM_beta\FlatCAMObj.py:2297
#: D:\1.DEV\FlatCAM_beta\FlatCAMObj.py:2408
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:626
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolNonCopperClear.py:82
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolPaint.py:80
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolSolderPaste.py:81
msgid "Diameter"
msgstr "Diameter"

#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:4693
msgid "Add/Delete Tool"
msgstr "Add/Delete Tool"

#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:4695
msgid ""
"Add/Delete a tool to the tool list\n"
"for this Excellon object."
msgstr ""
"Add/Delete a tool to the tool list\n"
"for this Excellon object."

#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:4703
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolCutOut.py:77
msgid "Tool Dia:"
msgstr "Tool Dia:"

#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:4705
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:1044
msgid "Diameter for the new tool"
msgstr "Diameter for the new tool"

#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:4714
msgid "Add Tool"
msgstr "Add Tool"

#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:4716
msgid ""
"Add a new tool to the tool list\n"
"with the diameter specified above."
msgstr ""
"Add a new tool to the tool list\n"
"with the diameter specified above."

#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:4726
msgid "Delete Tool"
msgstr "Delete Tool"

#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:4728
msgid ""
"Delete a tool in the tool list\n"
"by selecting a row in the tool table."
msgstr ""
"Delete a tool in the tool list\n"
"by selecting a row in the tool table."

#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:4746
msgid "Resize Drill(s)"
msgstr "Resize Drill(s)"

#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:4748
msgid "Resize a drill or a selection of drills."
msgstr "Resize a drill or a selection of drills."

#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:4755
msgid "Resize Dia:"
msgstr "Resize Dia:"

#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:4757
msgid "Diameter to resize to."
msgstr "Diameter to resize to."

#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:4765
msgid "Resize"
msgstr "Resize"

#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:4767
msgid "Resize drill(s)"
msgstr "Resize drill(s)"

#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:4789
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:1384
msgid "Add Drill Array"
msgstr "Add Drill Array"

#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:4791
msgid "Add an array of drills (linear or circular array)"
msgstr "Add an array of drills (linear or circular array)"

#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:4797
msgid ""
"Select the type of drills array to create.\n"
"It can be Linear X(Y) or Circular"
msgstr ""
"Select the type of drills array to create.\n"
"It can be Linear X(Y) or Circular"

#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:4800
msgid "Linear"
msgstr "Linear"

#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:4801
msgid "Circular"
msgstr "Circular"

#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:4808
msgid "Nr of drills:"
msgstr "Nr of drills:"

#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:4810
msgid "Specify how many drills to be in the array."
msgstr "Specify how many drills to be in the array."

#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:4827
#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:4872
msgid "Direction:"
msgstr "Direction:"

#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:4829
msgid ""
"Direction on which the linear array is oriented:\n"
"- 'X' - horizontal axis \n"
"- 'Y' - vertical axis or \n"
"- 'Angle' - a custom angle for the array inclination"
msgstr ""
"Direction on which the linear array is oriented:\n"
"- 'X' - horizontal axis \n"
"- 'Y' - vertical axis or \n"
"- 'Angle' - a custom angle for the array inclination"

#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:4838
msgid "Angle"
msgstr "Angle"

#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:4842
msgid "Pitch:"
msgstr "Pitch:"

#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:4844
msgid "Pitch = Distance between elements of the array."
msgstr "Pitch = Distance between elements of the array."

#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:4853
msgid ""
"Angle at which the linear array is placed.\n"
"The precision is of max 2 decimals.\n"
"Min value is: -359.99 degrees.\n"
"Max value is:  360.00 degrees."
msgstr ""
"Angle at which the linear array is placed.\n"
"The precision is of max 2 decimals.\n"
"Min value is: -359.99 degrees.\n"
"Max value is:  360.00 degrees."

#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:4874
msgid ""
"Direction for circular array.Can be CW = clockwise or CCW = counter "
"clockwise."
msgstr ""
"Direction for circular array.Can be CW = clockwise or CCW = counter "
"clockwise."

#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:4889
msgid "Angle at which each element in circular array is placed."
msgstr "Angle at which each element in circular array is placed."

#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:5210
#: D:\1.DEV\FlatCAM_beta\FlatCAMObj.py:1725
msgid "Total Drills"
msgstr "Total Drills"

#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:5242
#: D:\1.DEV\FlatCAM_beta\FlatCAMObj.py:1751
msgid "Total Slots"
msgstr "Total Slots"

#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:5316
#: D:\1.DEV\FlatCAM_beta\FlatCAMObj.py:1957
#: D:\1.DEV\FlatCAM_beta\FlatCAMObj.py:3220
#: D:\1.DEV\FlatCAM_beta\FlatCAMObj.py:3526
#: D:\1.DEV\FlatCAM_beta\FlatCAMObj.py:3713
#: D:\1.DEV\FlatCAM_beta\FlatCAMObj.py:3726
#: D:\1.DEV\FlatCAM_beta\FlatCAMObj.py:3843
#: D:\1.DEV\FlatCAM_beta\FlatCAMObj.py:4251
#: D:\1.DEV\FlatCAM_beta\FlatCAMObj.py:4484
#: D:\1.DEV\FlatCAM_beta\FlatCAMObj.py:4890
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolCalculators.py:304
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolCalculators.py:315
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolCalculators.py:327
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolCalculators.py:342
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolCalculators.py:355
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolCalculators.py:369
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolCalculators.py:380
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolCalculators.py:391
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolCalculators.py:402
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolFilm.py:238
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolFilm.py:245
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolNonCopperClear.py:475
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolNonCopperClear.py:622
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolNonCopperClear.py:634
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolPaint.py:534
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolPaint.py:604
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolPaint.py:739
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolPaint.py:830
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolPaint.py:985
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolPanelize.py:320
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolPanelize.py:332
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolPanelize.py:345
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolPanelize.py:358
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolPanelize.py:370
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolPanelize.py:381
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolSolderPaste.py:752
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolSolderPaste.py:823
msgid "[ERROR_NOTCL]Wrong value format entered, use a number."
msgstr "[ERROR_NOTCL]Wrong value format entered, use a number."

#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:5329
msgid ""
"[WARNING_NOTCL]Tool already in the original or actual tool list.\n"
"Save and reedit Excellon if you need to add this tool. "
msgstr ""
"[WARNING_NOTCL]Tool already in the original or actual tool list.\n"
"Save and reedit Excellon if you need to add this tool. "

#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:5338
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:2481
msgid "[success]Added new tool with dia: %s %s"
msgstr "[success]Added new tool with dia: %s %s"

#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:5369
msgid "[WARNING_NOTCL]Select a tool in Tool Table"
msgstr "[WARNING_NOTCL]Select a tool in Tool Table"

#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:5402
msgid "[success]Deleted tool with dia: %s %s"
msgstr "[success]Deleted tool with dia: %s %s"

#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:5799
msgid ""
"[ERROR_NOTCL] There are no Tools definitions in the file. Aborting Excellon "
"creation."
msgstr ""
"[ERROR_NOTCL] There are no Tools definitions in the file. Aborting Excellon "
"creation."

#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:5808
msgid "Creating Excellon."
msgstr "Creating Excellon."

#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:5817
msgid "[success]Excellon editing finished."
msgstr "[success]Excellon editing finished."

#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:5834
msgid "[WARNING_NOTCL]Cancelled. There is no Tool/Drill selected"
msgstr "[WARNING_NOTCL]Cancelled. There is no Tool/Drill selected"

#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:6316
msgid "[success]Done. Drill(s) deleted."
msgstr "[success]Done. Drill(s) deleted."

#: D:\1.DEV\FlatCAM_beta\FlatCAMEditor.py:6386
msgid "Click on the circular array Center position"
msgstr "Click on the circular array Center position"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:55
msgid "&New Project ...\tCTRL+N"
msgstr "&New Project ...\tCTRL+N"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:57
msgid "Will create a new, blank project"
msgstr "Will create a new, blank project"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:62
msgid "&New"
msgstr "&New"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:65
msgid "Geometry\tN"
msgstr "Geometry\tN"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:67
msgid "Will create a new, empty Geometry Object."
msgstr "Will create a new, empty Geometry Object."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:69
msgid "Excellon\tL"
msgstr "Excellon\tL"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:71
msgid "Will create a new, empty Excellon Object."
msgstr "Will create a new, empty Excellon Object."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:74
msgid "Open"
msgstr "Open"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:79
msgid "Open &Gerber ...\tCTRL+G"
msgstr "Open &Gerber ...\tCTRL+G"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:86
msgid "Open &Excellon ...\tCTRL+E"
msgstr "Open &Excellon ...\tCTRL+E"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:91
msgid "Open G-&Code ..."
msgstr "Open G-&Code ..."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:95
msgid "Open &Project ..."
msgstr "Open &Project ..."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:101
msgid "Open Config ..."
msgstr "Open Config ..."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:105
msgid "Recent files"
msgstr "Recent files"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:111
msgid "Run Script ...\tSHIFT+S"
msgstr "Run Script ...\tSHIFT+S"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:114
msgid ""
"Will run the opened Tcl Script thus\n"
"enabling the automation of certain\n"
"functions of FlatCAM."
msgstr ""
"Will run the opened Tcl Script thus\n"
"enabling the automation of certain\n"
"functions of FlatCAM."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:124
msgid "Import"
msgstr "Import"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:126
msgid "&SVG as Geometry Object ..."
msgstr "&SVG as Geometry Object ..."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:129
msgid "&SVG as Gerber Object ..."
msgstr "&SVG as Gerber Object ..."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:134
msgid "&DXF as Geometry Object ..."
msgstr "&DXF as Geometry Object ..."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:137
msgid "&DXF as Gerber Object ..."
msgstr "&DXF as Gerber Object ..."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:142
msgid "Export"
msgstr "Export"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:145
msgid "Export &SVG ..."
msgstr "Export &SVG ..."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:148
msgid "Export DXF ..."
msgstr "Export DXF ..."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:153
msgid "Export &PNG ..."
msgstr "Export &PNG ..."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:155
msgid ""
"Will export an image in PNG format,\n"
"the saved image will contain the visual \n"
"information currently in FlatCAM Plot Area."
msgstr ""
"Will export an image in PNG format,\n"
"the saved image will contain the visual \n"
"information currently in FlatCAM Plot Area."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:163
msgid "Export &Excellon ..."
msgstr "Export &Excellon ..."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:166
msgid ""
"Will export an Excellon Object as Excellon file,\n"
"the coordinates format, the file units and zeros\n"
"are set in Preferences -> Excellon Export."
msgstr ""
"Will export an Excellon Object as Excellon file,\n"
"the coordinates format, the file units and zeros\n"
"are set in Preferences -> Excellon Export."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:177
msgid "Save &Defaults"
msgstr "Save &Defaults"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:183
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:465
msgid "Save"
msgstr "Save"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:185
msgid "&Save Project ..."
msgstr "&Save Project ..."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:190
msgid "Save Project &As ...\tCTRL+S"
msgstr "Save Project &As ...\tCTRL+S"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:194
msgid "Save Project C&opy ..."
msgstr "Save Project C&opy ..."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:202
msgid "E&xit"
msgstr "E&xit"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:208
msgid "&Edit"
msgstr "&Edit"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:211
msgid "Edit Object\tE"
msgstr "Edit Object\tE"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:212
msgid "Save && Close Editor\tCTRL+S"
msgstr "Save && Close Editor\tCTRL+S"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:220
msgid "Conversion"
msgstr "Conversion"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:222
msgid "&Join Geo/Gerber/Exc -> Geo"
msgstr "&Join Geo/Gerber/Exc -> Geo"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:224
msgid ""
"Merge a selection of objects, which can be of type:\n"
"- Gerber\n"
"- Excellon\n"
"- Geometry\n"
"into a new combo Geometry object."
msgstr ""
"Merge a selection of objects, which can be of type:\n"
"- Gerber\n"
"- Excellon\n"
"- Geometry\n"
"into a new combo Geometry object."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:231
msgid "Join Excellon(s) -> Excellon"
msgstr "Join Excellon(s) -> Excellon"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:233
msgid "Merge a selection of Excellon objects into a new combo Excellon object."
msgstr ""
"Merge a selection of Excellon objects into a new combo Excellon object."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:236
msgid "Join Gerber(s) -> Gerber"
msgstr "Join Gerber(s) -> Gerber"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:238
msgid "Merge a selection of Gerber objects into a new combo Gerber object."
msgstr "Merge a selection of Gerber objects into a new combo Gerber object."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:243
msgid "Convert Single to MultiGeo"
msgstr "Convert Single to MultiGeo"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:245
msgid ""
"Will convert a Geometry object from single_geometry type\n"
"to a multi_geometry type."
msgstr ""
"Will convert a Geometry object from single_geometry type\n"
"to a multi_geometry type."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:249
msgid "Convert Multi to SingleGeo"
msgstr "Convert Multi to SingleGeo"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:251
msgid ""
"Will convert a Geometry object from multi_geometry type\n"
"to a single_geometry type."
msgstr ""
"Will convert a Geometry object from multi_geometry type\n"
"to a single_geometry type."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:258
msgid "&Copy Object\tCTRL+C"
msgstr "&Copy Object\tCTRL+C"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:260
msgid "Copy as &Geom"
msgstr "Copy as &Geom"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:263
msgid "&Delete\tDEL"
msgstr "&Delete\tDEL"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:267
msgid "Se&t Origin\tO"
msgstr "Se&t Origin\tO"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:268
msgid "Jump to Location\tJ"
msgstr "Jump to Location\tJ"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:273
msgid "Toggle Units\tQ"
msgstr "Toggle Units\tQ"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:275
msgid "&Select All\tCTRL+A"
msgstr "&Select All\tCTRL+A"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:279
msgid "&Preferences\tSHIFT+P"
msgstr "&Preferences\tSHIFT+P"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:282
msgid "&Options"
msgstr "&Options"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:297
msgid "&Rotate Selection\tSHIFT+(R)"
msgstr "&Rotate Selection\tSHIFT+(R)"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:302
msgid "&Skew on X axis\tSHIFT+X"
msgstr "&Skew on X axis\tSHIFT+X"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:304
msgid "S&kew on Y axis\tSHIFT+Y"
msgstr "S&kew on Y axis\tSHIFT+Y"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:309
msgid "Flip on &X axis\tX"
msgstr "Flip on &X axis\tX"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:311
msgid "Flip on &Y axis\tY"
msgstr "Flip on &Y axis\tY"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:316
msgid "View source\tALT+S"
msgstr "View source\tALT+S"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:321
msgid "&View"
msgstr "&View"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:322
msgid "Enable all plots\tALT+1"
msgstr "Enable all plots\tALT+1"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:324
msgid "Disable all plots\tALT+2"
msgstr "Disable all plots\tALT+2"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:326
msgid "Disable non-selected\tALT+3"
msgstr "Disable non-selected\tALT+3"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:329
msgid "&Zoom Fit\tV"
msgstr "&Zoom Fit\tV"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:330
msgid "&Zoom In\t-"
msgstr "&Zoom In\t-"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:331
msgid "&Zoom Out\t="
msgstr "&Zoom Out\t="

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:335
msgid "Toggle Code Editor\tCTRL+E"
msgstr "Toggle Code Editor\tCTRL+E"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:338
msgid "&Toggle FullScreen\tALT+F10"
msgstr "&Toggle FullScreen\tALT+F10"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:340
msgid "&Toggle Plot Area\tCTRL+F10"
msgstr "&Toggle Plot Area\tCTRL+F10"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:342
msgid "&Toggle Project/Sel/Tool\t`"
msgstr "&Toggle Project/Sel/Tool\t`"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:345
msgid "&Toggle Grid Snap\tG"
msgstr "&Toggle Grid Snap\tG"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:347
msgid "&Toggle Axis\tSHIFT+G"
msgstr "&Toggle Axis\tSHIFT+G"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:350
msgid "Toggle Workspace\tSHIFT+W"
msgstr "Toggle Workspace\tSHIFT+W"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:356
msgid "&Command Line\tS"
msgstr "&Command Line\tS"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:360
msgid "Help\tF1"
msgstr "Help\tF1"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:361
msgid "FlatCAM.org"
msgstr "FlatCAM.org"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:364
msgid "Shortcuts List\tF3"
msgstr "Shortcuts List\tF3"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:365
msgid "YouTube Channel\tF4"
msgstr "YouTube Channel\tF4"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:367
msgid "About"
msgstr "About"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:378
msgid "Add Circle\tO"
msgstr "Add Circle\tO"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:380
msgid "Add Arc\tA"
msgstr "Add Arc\tA"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:383
msgid "Add Rectangle\tR"
msgstr "Add Rectangle\tR"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:386
msgid "Add Polygon\tN"
msgstr "Add Polygon\tN"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:388
msgid "Add Path\tP"
msgstr "Add Path\tP"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:390
msgid "Add Text\tT"
msgstr "Add Text\tT"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:393
msgid "Polygon Union\tU"
msgstr "Polygon Union\tU"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:395
msgid "Polygon Intersection\tE"
msgstr "Polygon Intersection\tE"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:397
msgid "Polygon Subtraction\tS"
msgstr "Polygon Subtraction\tS"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:401
msgid "Cut Path\tX"
msgstr "Cut Path\tX"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:403
msgid "Copy Geom\tC"
msgstr "Copy Geom\tC"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:405
msgid "Delete Shape\tDEL"
msgstr "Delete Shape\tDEL"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:408
msgid "Move\tM"
msgstr "Move\tM"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:410
msgid "Buffer Tool\tB"
msgstr "Buffer Tool\tB"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:413
msgid "Paint Tool\tI"
msgstr "Paint Tool\tI"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:416
msgid "Transform Tool\tALT+R"
msgstr "Transform Tool\tALT+R"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:420
msgid "Toggle Corner Snap\tK"
msgstr "Toggle Corner Snap\tK"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:423
msgid ">Excellon Editor<"
msgstr ">Excellon Editor<"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:427
msgid "Add Drill Array\tA"
msgstr "Add Drill Array\tA"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:429
msgid "Add Drill\tD"
msgstr "Add Drill\tD"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:433
msgid "Resize Drill(S)\tR"
msgstr "Resize Drill(S)\tR"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:435
msgid "Copy\tC"
msgstr "Copy\tC"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:437
msgid "Delete\tDEL"
msgstr "Delete\tDEL"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:442
msgid "Move Drill(s)\tM"
msgstr "Move Drill(s)\tM"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:456
msgid "Enable Plot"
msgstr "Enable Plot"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:457
msgid "Disable Plot"
msgstr "Disable Plot"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:459
msgid "Generate CNC"
msgstr "Generate CNC"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:460
msgid "View Source"
msgstr "View Source"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:462
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:1390
msgid "Edit"
msgstr "Edit"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:463
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:1388
#: D:\1.DEV\FlatCAM_beta\FlatCAMObj.py:3142
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:1066
msgid "Copy"
msgstr "Copy"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:464
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:1389
#: D:\1.DEV\FlatCAM_beta\FlatCAMObj.py:3144
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:1074
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolNonCopperClear.py:145
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolPaint.py:143
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolSolderPaste.py:121
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolSolderPaste.py:477
msgid "Delete"
msgstr "Delete"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:468
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:1396
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolProperties.py:25
msgid "Properties"
msgstr "Properties"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:497
msgid "File Toolbar"
msgstr "File Toolbar"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:501
msgid "Edit Toolbar"
msgstr "Edit Toolbar"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:505
msgid "View Toolbar"
msgstr "View Toolbar"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:509
msgid "Shell Toolbar"
msgstr "Shell Toolbar"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:513
msgid "Tools Toolbar"
msgstr "Tools Toolbar"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:517
msgid "Excellon Editor Toolbar"
msgstr "Excellon Editor Toolbar"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:521
msgid "Geometry Editor Toolbar"
msgstr "Geometry Editor Toolbar"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:525
msgid "Grid Toolbar"
msgstr "Grid Toolbar"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:544
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:1593
msgid "Open project"
msgstr "Open project"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:545
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:1594
msgid "Save project"
msgstr "Save project"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:548
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:1597
msgid "New Blank Geometry"
msgstr "New Blank Geometry"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:549
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:1598
msgid "New Blank Excellon"
msgstr "New Blank Excellon"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:551
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:1600
msgid "Editor"
msgstr "Editor"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:553
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:1602
msgid "Save Object and close the Editor"
msgstr "Save Object and close the Editor"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:557
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:1606
msgid "&Delete"
msgstr "&Delete"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:560
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:1609
msgid "&Replot"
msgstr "&Replot"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:561
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:1610
msgid "&Clear plot"
msgstr "&Clear plot"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:562
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:1611
msgid "Zoom In"
msgstr "Zoom In"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:563
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:1612
msgid "Zoom Out"
msgstr "Zoom Out"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:564
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:1370
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:1613
msgid "Zoom Fit"
msgstr "Zoom Fit"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:569
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:1618
msgid "&Command Line"
msgstr "&Command Line"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:572
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:1621
msgid "2Sided Tool"
msgstr "2Sided Tool"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:573
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:1622
msgid "&Cutout Tool"
msgstr "&Cutout Tool"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:574
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:1623
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:462
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolNonCopperClear.py:280
msgid "NCC Tool"
msgstr "NCC Tool"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:578
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:1627
msgid "Panel Tool"
msgstr "Panel Tool"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:579
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:1628
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolFilm.py:201
msgid "Film Tool"
msgstr "Film Tool"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:580
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:1630
msgid "SolderPaste Tool"
msgstr "SolderPaste Tool"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:583
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:1634
msgid "Calculators Tool"
msgstr "Calculators Tool"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:587
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:601
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:1638
msgid "Select"
msgstr "Select"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:588
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:1639
msgid "Add Drill Hole"
msgstr "Add Drill Hole"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:591
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:1642
msgid "Resize Drill"
msgstr "Resize Drill"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:594
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:1645
msgid "Copy Drill"
msgstr "Copy Drill"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:595
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:1647
msgid "Delete Drill"
msgstr "Delete Drill"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:598
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:1650
msgid "Move Drill"
msgstr "Move Drill"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:602
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:1654
msgid "Add Circle"
msgstr "Add Circle"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:603
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:1655
msgid "Add Arc"
msgstr "Add Arc"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:605
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:1657
msgid "Add Rectangle"
msgstr "Add Rectangle"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:608
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:1660
msgid "Add Path"
msgstr "Add Path"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:609
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:1662
msgid "Add Polygon"
msgstr "Add Polygon"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:611
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:1664
msgid "Add Text"
msgstr "Add Text"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:612
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:1666
msgid "Add Buffer"
msgstr "Add Buffer"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:613
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:1667
msgid "Paint Shape"
msgstr "Paint Shape"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:616
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:1670
msgid "Polygon Union"
msgstr "Polygon Union"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:618
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:1672
msgid "Polygon Intersection"
msgstr "Polygon Intersection"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:620
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:1674
msgid "Polygon Subtraction"
msgstr "Polygon Subtraction"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:623
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:1677
msgid "Cut Path"
msgstr "Cut Path"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:624
msgid "Copy Shape(s)"
msgstr "Copy Shape(s)"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:627
msgid "Delete Shape '-'"
msgstr "Delete Shape '-'"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:629
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:1682
msgid "Transformations"
msgstr "Transformations"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:631
msgid "Move Objects "
msgstr "Move Objects "

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:637
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:1691
msgid "Snap to grid"
msgstr "Snap to grid"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:640
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:1694
msgid "Grid X snapping distance"
msgstr "Grid X snapping distance"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:645
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:1699
msgid "Grid Y snapping distance"
msgstr "Grid Y snapping distance"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:651
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:1705
msgid ""
"When active, value on Grid_X\n"
"is copied to the Grid_Y value."
msgstr ""
"When active, value on Grid_X\n"
"is copied to the Grid_Y value."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:657
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:1711
msgid "Snap to corner"
msgstr "Snap to corner"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:661
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:1715
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:2787
msgid "Max. magnet distance"
msgstr "Max. magnet distance"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:675
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:1364
msgid "Project"
msgstr "Project"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:684
msgid "Selected"
msgstr "Selected"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:688
msgid "tool_tab"
msgstr "tool_tab"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:691
msgid "Tool"
msgstr "Tool"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:703
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:711
msgid "Plot Area"
msgstr "Plot Area"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:735
msgid "General"
msgstr "General"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:744
msgid "APP.  DEFAULTS"
msgstr "APP.  DEFAULTS"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:745
msgid "PROJ. OPTIONS "
msgstr "PROJ. OPTIONS "

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:756
msgid "GERBER"
msgstr "GERBER"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:765
msgid "EXCELLON"
msgstr "EXCELLON"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:774
msgid "GEOMETRY"
msgstr "GEOMETRY"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:784
msgid "CNC-JOB"
msgstr "CNC-JOB"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:793
msgid "TOOLS"
msgstr "TOOLS"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:810
msgid "Import Preferences"
msgstr "Import Preferences"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:813
msgid ""
"Import a full set of FlatCAM settings from a file\n"
"previously saved on HDD.\n"
"\n"
"FlatCAM automatically save a 'factory_defaults' file\n"
"on the first start. Do not delete that file."
msgstr ""
"Import a full set of FlatCAM settings from a file\n"
"previously saved on HDD.\n"
"\n"
"FlatCAM automatically save a 'factory_defaults' file\n"
"on the first start. Do not delete that file."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:820
msgid "Export Preferences"
msgstr "Export Preferences"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:823
msgid ""
"Export a full set of FlatCAM settings in a file\n"
"that is saved on HDD."
msgstr ""
"Export a full set of FlatCAM settings in a file\n"
"that is saved on HDD."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:828
msgid "Open Pref Folder"
msgstr "Open Pref Folder"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:831
msgid "Open the folder where FlatCAM save the preferences files."
msgstr "Open the folder where FlatCAM save the preferences files."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:839
msgid "Save Preferences"
msgstr "Save Preferences"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:842
msgid ""
"Save the current settings in the 'current_defaults' file\n"
"which is the file storing the working default preferences."
msgstr ""
"Save the current settings in the 'current_defaults' file\n"
"which is the file storing the working default preferences."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:867
msgid ""
"<b>General Shortcut list</b><br>\n"
"            <table border=\"0\" cellpadding=\"0\" cellspacing=\"0\" style="
"\"width:283px\">\n"
"                <tbody>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\" width=\"89\"><strong>F3</strong></"
"td>\n"
"                        <td width=\"194\"><span style=\"color:"
"#006400\"><strong>&nbsp;SHOW SHORTCUT LIST</strong></span></td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\">&nbsp;</td>\n"
"                        <td>&nbsp;</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>1</strong></td>\n"
"                        <td>&nbsp;Switch to Project Tab</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>2</strong></td>\n"
"                        <td>&nbsp;Switch to Selected Tab</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>3</strong></td>\n"
"                        <td>&nbsp;Switch to Tool Tab</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\">&nbsp;</td>\n"
"                        <td>&nbsp;</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>E</strong></td>\n"
"                        <td>&nbsp;Edit Object (if selected)</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>G</strong></td>\n"
"                        <td>&nbsp;Grid On/Off</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>J</strong></td>\n"
"                        <td>&nbsp;Jump to Coordinates</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>L</strong></td>\n"
"                        <td>&nbsp;New Excellon</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>M</strong></td>\n"
"                        <td>&nbsp;Move Obj</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>N</strong></td>\n"
"                        <td>&nbsp;New Geometry</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>O</strong></td>\n"
"                        <td>&nbsp;Set Origin</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>Q</strong></td>\n"
"                        <td>&nbsp;Change Units</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>P</strong></td>\n"
"                        <td>&nbsp;Open Properties Tool</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>R</strong></td>\n"
"                        <td>&nbsp;Rotate by 90 degree CW</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>S</strong></td>\n"
"                        <td>&nbsp;Shell Toggle</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>T</strong></td>\n"
"                        <td>&nbsp;Add a Tool (when in Geometry Selected Tab "
"or in Tools NCC or Tools Paint)</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>V</strong></td>\n"
"                        <td>&nbsp;Zoom Fit</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>X</strong></td>\n"
"                        <td>&nbsp;Flip on X_axis</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>Y</strong></td>\n"
"                        <td>&nbsp;Flip on Y_axis</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>&#39;=&#39;</strong></td>\n"
"                        <td>&nbsp;Zoom Out</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>&#39;-&#39;</strong></td>\n"
"                        <td>&nbsp;Zoom In</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\">&nbsp;</td>\n"
"                        <td>&nbsp;</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>CTRL+A</strong></td>\n"
"                        <td>&nbsp;Select All</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>CTRL+C</strong></td>\n"
"                        <td>&nbsp;Copy Obj</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>CTRL+E</strong></td>\n"
"                        <td>&nbsp;Open Excellon File</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>CTRL+G</strong></td>\n"
"                        <td>&nbsp;Open Gerber File</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>CTRL+N</strong></td>\n"
"                        <td>&nbsp;New Project</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>CTRL+M</strong></td>\n"
"                        <td>&nbsp;Measurement Tool</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>CTRL+O</strong></td>\n"
"                        <td>&nbsp;Open Project</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>CTRL+S</strong></td>\n"
"                        <td>&nbsp;Save Project As</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>CTRL+F10</strong></td>\n"
"                        <td>&nbsp;Toggle Plot Area</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\">&nbsp;</td>\n"
"                        <td>&nbsp;</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>SHIFT+C</strong></td>\n"
"                        <td>&nbsp;Copy Obj_Name</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>SHIFT+E</strong></td>\n"
"                        <td>&nbsp;Toggle Code Editor</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>SHIFT+G</strong></td>\n"
"                        <td>&nbsp;Toggle the axis</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>SHIFT+P</strong></td>\n"
"                        <td>&nbsp;Open Preferences Window</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>SHIFT+R</strong></td>\n"
"                        <td>&nbsp;Rotate by 90 degree CCW</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>SHIFT+S</strong></td>\n"
"                        <td>&nbsp;Run a Script</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>SHIFT+W</strong></td>\n"
"                        <td>&nbsp;Toggle the workspace</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>SHIFT+X</strong></td>\n"
"                        <td>&nbsp;Skew on X axis</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>SHIFT+Y</strong></td>\n"
"                        <td>&nbsp;Skew on Y axis</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\">&nbsp;</td>\n"
"                        <td>&nbsp;</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>ALT+C</strong></td>\n"
"                        <td>&nbsp;Calculators Tool</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>ALT+D</strong></td>\n"
"                        <td>&nbsp;2-Sided PCB Tool</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>ALT+K</strong></td>\n"
"                        <td>&nbsp;Solder Paste Dispensing Tool</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>ALT+L</strong></td>\n"
"                        <td>&nbsp;Film PCB Tool</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>ALT+N</strong></td>\n"
"                        <td>&nbsp;Non-Copper Clearing Tool</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>ALT+P</strong></td>\n"
"                        <td>&nbsp;Paint Area Tool</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>ALT+R</strong></td>\n"
"                        <td>&nbsp;Transformations Tool</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>ALT+S</strong></td>\n"
"                        <td>&nbsp;View File Source</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>ALT+U</strong></td>\n"
"                        <td>&nbsp;Cutout PCB Tool</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>ALT+1</strong></td>\n"
"                        <td>&nbsp;Enable all Plots</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>ALT+2</strong></td>\n"
"                        <td>&nbsp;Disable all Plots</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>ALT+3</strong></td>\n"
"                        <td>&nbsp;Disable Non-selected Plots</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>ALT+F10</strong></td>\n"
"                        <td>&nbsp;Toggle Full Screen</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\">&nbsp;</td>\n"
"                        <td>&nbsp;</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>F1</strong></td>\n"
"                        <td>&nbsp;Open Online Manual</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>F4</strong></td>\n"
"                        <td>&nbsp;Open Online Tutorials</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>Del</strong></td>\n"
"                        <td>&nbsp;Delete Object</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>Del</strong></td>\n"
"                        <td>&nbsp;Alternate: Delete Tool</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>'`'</strong></td>\n"
"                        <td>&nbsp;(left to Key_1)Toogle Notebook Area (Left "
"Side)</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>SPACE</strong></td>\n"
"                        <td>&nbsp;En(Dis)able Obj Plot</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>Escape</strong></td>\n"
"                        <td>&nbsp;Deselects all objects</td>\n"
"                    </tr>\n"
"                </tbody>\n"
"            </table>\n"
"    \n"
"            "
msgstr ""
"<b>General Shortcut list</b><br>\n"
"            <table border=\"0\" cellpadding=\"0\" cellspacing=\"0\" style="
"\"width:283px\">\n"
"                <tbody>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\" width=\"89\"><strong>F3</strong></"
"td>\n"
"                        <td width=\"194\"><span style=\"color:"
"#006400\"><strong>&nbsp;SHOW SHORTCUT LIST</strong></span></td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\">&nbsp;</td>\n"
"                        <td>&nbsp;</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>1</strong></td>\n"
"                        <td>&nbsp;Switch to Project Tab</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>2</strong></td>\n"
"                        <td>&nbsp;Switch to Selected Tab</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>3</strong></td>\n"
"                        <td>&nbsp;Switch to Tool Tab</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\">&nbsp;</td>\n"
"                        <td>&nbsp;</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>E</strong></td>\n"
"                        <td>&nbsp;Edit Object (if selected)</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>G</strong></td>\n"
"                        <td>&nbsp;Grid On/Off</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>J</strong></td>\n"
"                        <td>&nbsp;Jump to Coordinates</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>L</strong></td>\n"
"                        <td>&nbsp;New Excellon</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>M</strong></td>\n"
"                        <td>&nbsp;Move Obj</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>N</strong></td>\n"
"                        <td>&nbsp;New Geometry</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>O</strong></td>\n"
"                        <td>&nbsp;Set Origin</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>Q</strong></td>\n"
"                        <td>&nbsp;Change Units</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>P</strong></td>\n"
"                        <td>&nbsp;Open Properties Tool</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>R</strong></td>\n"
"                        <td>&nbsp;Rotate by 90 degree CW</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>S</strong></td>\n"
"                        <td>&nbsp;Shell Toggle</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>T</strong></td>\n"
"                        <td>&nbsp;Add a Tool (when in Geometry Selected Tab "
"or in Tools NCC or Tools Paint)</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>V</strong></td>\n"
"                        <td>&nbsp;Zoom Fit</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>X</strong></td>\n"
"                        <td>&nbsp;Flip on X_axis</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>Y</strong></td>\n"
"                        <td>&nbsp;Flip on Y_axis</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>&#39;=&#39;</strong></td>\n"
"                        <td>&nbsp;Zoom Out</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>&#39;-&#39;</strong></td>\n"
"                        <td>&nbsp;Zoom In</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\">&nbsp;</td>\n"
"                        <td>&nbsp;</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>CTRL+A</strong></td>\n"
"                        <td>&nbsp;Select All</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>CTRL+C</strong></td>\n"
"                        <td>&nbsp;Copy Obj</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>CTRL+E</strong></td>\n"
"                        <td>&nbsp;Open Excellon File</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>CTRL+G</strong></td>\n"
"                        <td>&nbsp;Open Gerber File</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>CTRL+N</strong></td>\n"
"                        <td>&nbsp;New Project</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>CTRL+M</strong></td>\n"
"                        <td>&nbsp;Measurement Tool</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>CTRL+O</strong></td>\n"
"                        <td>&nbsp;Open Project</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>CTRL+S</strong></td>\n"
"                        <td>&nbsp;Save Project As</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>CTRL+F10</strong></td>\n"
"                        <td>&nbsp;Toggle Plot Area</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\">&nbsp;</td>\n"
"                        <td>&nbsp;</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>SHIFT+C</strong></td>\n"
"                        <td>&nbsp;Copy Obj_Name</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>SHIFT+E</strong></td>\n"
"                        <td>&nbsp;Toggle Code Editor</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>SHIFT+G</strong></td>\n"
"                        <td>&nbsp;Toggle the axis</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>SHIFT+P</strong></td>\n"
"                        <td>&nbsp;Open Preferences Window</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>SHIFT+R</strong></td>\n"
"                        <td>&nbsp;Rotate by 90 degree CCW</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>SHIFT+S</strong></td>\n"
"                        <td>&nbsp;Run a Script</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>SHIFT+W</strong></td>\n"
"                        <td>&nbsp;Toggle the workspace</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>SHIFT+X</strong></td>\n"
"                        <td>&nbsp;Skew on X axis</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>SHIFT+Y</strong></td>\n"
"                        <td>&nbsp;Skew on Y axis</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\">&nbsp;</td>\n"
"                        <td>&nbsp;</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>ALT+C</strong></td>\n"
"                        <td>&nbsp;Calculators Tool</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>ALT+D</strong></td>\n"
"                        <td>&nbsp;2-Sided PCB Tool</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>ALT+K</strong></td>\n"
"                        <td>&nbsp;Solder Paste Dispensing Tool</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>ALT+L</strong></td>\n"
"                        <td>&nbsp;Film PCB Tool</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>ALT+N</strong></td>\n"
"                        <td>&nbsp;Non-Copper Clearing Tool</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>ALT+P</strong></td>\n"
"                        <td>&nbsp;Paint Area Tool</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>ALT+R</strong></td>\n"
"                        <td>&nbsp;Transformations Tool</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>ALT+S</strong></td>\n"
"                        <td>&nbsp;View File Source</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>ALT+U</strong></td>\n"
"                        <td>&nbsp;Cutout PCB Tool</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>ALT+1</strong></td>\n"
"                        <td>&nbsp;Enable all Plots</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>ALT+2</strong></td>\n"
"                        <td>&nbsp;Disable all Plots</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>ALT+3</strong></td>\n"
"                        <td>&nbsp;Disable Non-selected Plots</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>ALT+F10</strong></td>\n"
"                        <td>&nbsp;Toggle Full Screen</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\">&nbsp;</td>\n"
"                        <td>&nbsp;</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>F1</strong></td>\n"
"                        <td>&nbsp;Open Online Manual</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>F4</strong></td>\n"
"                        <td>&nbsp;Open Online Tutorials</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>Del</strong></td>\n"
"                        <td>&nbsp;Delete Object</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>Del</strong></td>\n"
"                        <td>&nbsp;Alternate: Delete Tool</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>'`'</strong></td>\n"
"                        <td>&nbsp;(left to Key_1)Toogle Notebook Area (Left "
"Side)</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>SPACE</strong></td>\n"
"                        <td>&nbsp;En(Dis)able Obj Plot</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>Escape</strong></td>\n"
"                        <td>&nbsp;Deselects all objects</td>\n"
"                    </tr>\n"
"                </tbody>\n"
"            </table>\n"
"    \n"
"            "

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:1144
msgid ""
"<b>Editor Shortcut list</b><br>\n"
"            <br>\n"
"            <strong><span style=\"color:#0000ff\">GEOMETRY EDITOR</span></"
"strong><br>\n"
"    \n"
"            <table border=\"0\" cellpadding=\"0\" cellspacing=\"0\" style="
"\"width:283px\">\n"
"                <tbody>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\" width=\"89\"><strong>A</strong></"
"td>\n"
"                        <td width=\"194\">&nbsp;Draw an Arc</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>B</strong></td>\n"
"                        <td>&nbsp;Buffer Tool</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>C</strong></td>\n"
"                        <td>&nbsp;Copy Geo Item</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>E</strong></td>\n"
"                        <td>&nbsp;Polygon Intersection Tool</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>I</strong></td>\n"
"                        <td>&nbsp;Paint Tool</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>J</strong></td>\n"
"                        <td>&nbsp;Jump to Location (x, y)</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>K</strong></td>\n"
"                        <td>&nbsp;Toggle Corner Snap</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>M</strong></td>\n"
"                        <td>&nbsp;Move Geo Item</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>N</strong></td>\n"
"                        <td>&nbsp;Draw a Polygon</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>O</strong></td>\n"
"                        <td>&nbsp;Draw a Circle</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>P</strong></td>\n"
"                        <td>&nbsp;Draw a Path</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>R</strong></td>\n"
"                        <td>&nbsp;Draw Rectangle</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>S</strong></td>\n"
"                        <td>&nbsp;Polygon Substraction Tool</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>T</strong></td>\n"
"                        <td>&nbsp;Add Text Tool</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>U</strong></td>\n"
"                        <td>&nbsp;Polygon Union Tool</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>X</strong></td>\n"
"                        <td>&nbsp;Flip shape on X axis</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>Y</strong></td>\n"
"                        <td>&nbsp;Flip shape on Y axis</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\">&nbsp;</td>\n"
"                        <td>&nbsp;</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>SHIFT+X</strong></td>\n"
"                        <td>&nbsp;Skew shape on X axis</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>SHIFT+Y</strong></td>\n"
"                        <td>&nbsp;Skew shape on Y axis</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\">&nbsp;</td>\n"
"                        <td>&nbsp;</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>ALT+R</strong></td>\n"
"                        <td>&nbsp;Editor Transformation Tool</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>ALT+X</strong></td>\n"
"                        <td>&nbsp;Offset shape on X axis</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>ALT+Y</strong></td>\n"
"                        <td>&nbsp;Offset shape on Y axis</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\">&nbsp;</td>\n"
"                        <td>&nbsp;</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>CTRL+M</strong></td>\n"
"                        <td>&nbsp;Measurement Tool</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>CTRL+S</strong></td>\n"
"                        <td>&nbsp;Save Object and Exit Editor</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>CTRL+X</strong></td>\n"
"                        <td>&nbsp;Polygon Cut Tool</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\">&nbsp;</td>\n"
"                        <td>&nbsp;</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>Space</strong></td>\n"
"                        <td>&nbsp;Rotate Geometry</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>ENTER</strong></td>\n"
"                        <td>&nbsp;Finish drawing for certain tools</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>ESC</strong></td>\n"
"                        <td>&nbsp;Abort and return to Select</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>Del</strong></td>\n"
"                        <td>&nbsp;Delete Shape</td>\n"
"                    </tr>\n"
"                </tbody>\n"
"            </table>\n"
"            <br>\n"
"            <br>\n"
"            <strong><span style=\"color:#ff0000\">EXCELLON EDITOR</span></"
"strong><br>\n"
"            <table border=\"0\" cellpadding=\"0\" cellspacing=\"0\" style="
"\"width:283px\">\n"
"                <tbody>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\" width=\"89\"><strong>A</strong></"
"td>\n"
"                        <td width=\"194\">&nbsp;Add Drill Array</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>C</strong></td>\n"
"                        <td>&nbsp;Copy Drill(s)</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>D</strong></td>\n"
"                        <td>&nbsp;Add Drill</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>J</strong></td>\n"
"                        <td>&nbsp;Jump to Location (x, y)</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>M</strong></td>\n"
"                        <td>&nbsp;Move Drill(s)</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>R</strong></td>\n"
"                        <td>&nbsp;Resize Drill(s)</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>T</strong></td>\n"
"                        <td>&nbsp;Add a new Tool</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\">&nbsp;</td>\n"
"                        <td>&nbsp;</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>Del</strong></td>\n"
"                        <td>&nbsp;Delete Drill(s)</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>Del</strong></td>\n"
"                        <td>&nbsp;Alternate: Delete Tool(s)</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\">&nbsp;</td>\n"
"                        <td>&nbsp;</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>ESC</strong></td>\n"
"                        <td>&nbsp;Abort and return to Select</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>CTRL+S</strong></td>\n"
"                        <td>&nbsp;Save Object and Exit Editor</td>\n"
"                    </tr>\n"
"                </tbody>\n"
"            </table>\n"
"                    "
msgstr ""
"<b>Editor Shortcut list</b><br>\n"
"            <br>\n"
"            <strong><span style=\"color:#0000ff\">GEOMETRY EDITOR</span></"
"strong><br>\n"
"    \n"
"            <table border=\"0\" cellpadding=\"0\" cellspacing=\"0\" style="
"\"width:283px\">\n"
"                <tbody>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\" width=\"89\"><strong>A</strong></"
"td>\n"
"                        <td width=\"194\">&nbsp;Draw an Arc</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>B</strong></td>\n"
"                        <td>&nbsp;Buffer Tool</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>C</strong></td>\n"
"                        <td>&nbsp;Copy Geo Item</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>E</strong></td>\n"
"                        <td>&nbsp;Polygon Intersection Tool</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>I</strong></td>\n"
"                        <td>&nbsp;Paint Tool</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>J</strong></td>\n"
"                        <td>&nbsp;Jump to Location (x, y)</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>K</strong></td>\n"
"                        <td>&nbsp;Toggle Corner Snap</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>M</strong></td>\n"
"                        <td>&nbsp;Move Geo Item</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>N</strong></td>\n"
"                        <td>&nbsp;Draw a Polygon</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>O</strong></td>\n"
"                        <td>&nbsp;Draw a Circle</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>P</strong></td>\n"
"                        <td>&nbsp;Draw a Path</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>R</strong></td>\n"
"                        <td>&nbsp;Draw Rectangle</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>S</strong></td>\n"
"                        <td>&nbsp;Polygon Substraction Tool</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>T</strong></td>\n"
"                        <td>&nbsp;Add Text Tool</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>U</strong></td>\n"
"                        <td>&nbsp;Polygon Union Tool</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>X</strong></td>\n"
"                        <td>&nbsp;Flip shape on X axis</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>Y</strong></td>\n"
"                        <td>&nbsp;Flip shape on Y axis</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\">&nbsp;</td>\n"
"                        <td>&nbsp;</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>SHIFT+X</strong></td>\n"
"                        <td>&nbsp;Skew shape on X axis</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>SHIFT+Y</strong></td>\n"
"                        <td>&nbsp;Skew shape on Y axis</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\">&nbsp;</td>\n"
"                        <td>&nbsp;</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>ALT+R</strong></td>\n"
"                        <td>&nbsp;Editor Transformation Tool</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>ALT+X</strong></td>\n"
"                        <td>&nbsp;Offset shape on X axis</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>ALT+Y</strong></td>\n"
"                        <td>&nbsp;Offset shape on Y axis</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\">&nbsp;</td>\n"
"                        <td>&nbsp;</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>CTRL+M</strong></td>\n"
"                        <td>&nbsp;Measurement Tool</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>CTRL+S</strong></td>\n"
"                        <td>&nbsp;Save Object and Exit Editor</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>CTRL+X</strong></td>\n"
"                        <td>&nbsp;Polygon Cut Tool</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\">&nbsp;</td>\n"
"                        <td>&nbsp;</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>Space</strong></td>\n"
"                        <td>&nbsp;Rotate Geometry</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>ENTER</strong></td>\n"
"                        <td>&nbsp;Finish drawing for certain tools</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>ESC</strong></td>\n"
"                        <td>&nbsp;Abort and return to Select</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>Del</strong></td>\n"
"                        <td>&nbsp;Delete Shape</td>\n"
"                    </tr>\n"
"                </tbody>\n"
"            </table>\n"
"            <br>\n"
"            <br>\n"
"            <strong><span style=\"color:#ff0000\">EXCELLON EDITOR</span></"
"strong><br>\n"
"            <table border=\"0\" cellpadding=\"0\" cellspacing=\"0\" style="
"\"width:283px\">\n"
"                <tbody>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\" width=\"89\"><strong>A</strong></"
"td>\n"
"                        <td width=\"194\">&nbsp;Add Drill Array</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>C</strong></td>\n"
"                        <td>&nbsp;Copy Drill(s)</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>D</strong></td>\n"
"                        <td>&nbsp;Add Drill</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>J</strong></td>\n"
"                        <td>&nbsp;Jump to Location (x, y)</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>M</strong></td>\n"
"                        <td>&nbsp;Move Drill(s)</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>R</strong></td>\n"
"                        <td>&nbsp;Resize Drill(s)</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>T</strong></td>\n"
"                        <td>&nbsp;Add a new Tool</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\">&nbsp;</td>\n"
"                        <td>&nbsp;</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>Del</strong></td>\n"
"                        <td>&nbsp;Delete Drill(s)</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>Del</strong></td>\n"
"                        <td>&nbsp;Alternate: Delete Tool(s)</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\">&nbsp;</td>\n"
"                        <td>&nbsp;</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>ESC</strong></td>\n"
"                        <td>&nbsp;Abort and return to Select</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>CTRL+S</strong></td>\n"
"                        <td>&nbsp;Save Object and Exit Editor</td>\n"
"                    </tr>\n"
"                </tbody>\n"
"            </table>\n"
"                    "

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:1358
msgid "Disable"
msgstr "Disable"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:1360
msgid "New"
msgstr "New"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:1361
msgid "Geometry"
msgstr "Geometry"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:1362
msgid "Excellon"
msgstr "Excellon"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:1367
msgid "Grids"
msgstr "Grids"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:1369
msgid "View"
msgstr "View"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:1371
msgid "Clear Plot"
msgstr "Clear Plot"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:1372
msgid "Replot"
msgstr "Replot"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:1375
msgid "Geo Editor"
msgstr "Geo Editor"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:1376
msgid "Line"
msgstr "Line"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:1377
msgid "Rectangle"
msgstr "Rectangle"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:1378
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:4590
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:1430
msgid "Cut"
msgstr "Cut"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:1380
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:1395
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolMove.py:26
msgid "Move"
msgstr "Move"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:1382
msgid "Exc Editor"
msgstr "Exc Editor"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:1383
msgid "Add Drill"
msgstr "Add Drill"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:1385
msgid "Copy Drill(s)"
msgstr "Copy Drill(s)"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:1391
msgid "Save && Close Edit"
msgstr "Save && Close Edit"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:1416
msgid "Print Preview"
msgstr "Print Preview"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:1417
msgid "Print Code"
msgstr "Print Code"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:1418
msgid "Find in Code"
msgstr "Find in Code"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:1423
msgid "Replace With"
msgstr "Replace With"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:1427
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:4588
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:5089
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:1428
msgid "All"
msgstr "All"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:1429
msgid ""
"When checked it will replace all instances in the 'Find' box\n"
"with the text in the 'Replace' box.."
msgstr ""
"When checked it will replace all instances in the 'Find' box\n"
"with the text in the 'Replace' box.."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:1432
msgid "Open Code"
msgstr "Open Code"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:1433
msgid "Save Code"
msgstr "Save Code"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:1468
msgid ""
"Relative neasurement.\n"
"Reference is last click position"
msgstr ""
"Relative neasurement.\n"
"Reference is last click position"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:1474
msgid ""
"Absolute neasurement.\n"
"Reference is (X=0, Y= 0) position"
msgstr ""
"Absolute neasurement.\n"
"Reference is (X=0, Y= 0) position"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:1641
msgid "Add Drill Hole Array"
msgstr "Add Drill Hole Array"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:1653
msgid "Select 'Esc'"
msgstr "Select 'Esc'"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:1678
msgid "Copy Objects"
msgstr "Copy Objects"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:1680
msgid "Delete Shape"
msgstr "Delete Shape"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:1685
msgid "Move Objects"
msgstr "Move Objects"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:2060
msgid ""
"Please first select a geometry item to be cutted\n"
"then select the geometry item that will be cutted\n"
"out of the first item. In the end press ~X~ key or\n"
"the toolbar button."
msgstr ""
"Please first select a geometry item to be cutted\n"
"then select the geometry item that will be cutted\n"
"out of the first item. In the end press ~X~ key or\n"
"the toolbar button."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:2067
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:2199
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:2258
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:2278
msgid "Warning"
msgstr "Warning"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:2134
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:2328
msgid "[WARNING_NOTCL]Cancelled."
msgstr "[WARNING_NOTCL]Cancelled."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:2194
msgid ""
"Please select geometry items \n"
"on which to perform Intersection Tool."
msgstr ""
"Please select geometry items \n"
"on which to perform Intersection Tool."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:2252
msgid ""
"Please select geometry items \n"
"on which to perform Substraction Tool."
msgstr ""
"Please select geometry items \n"
"on which to perform Substraction Tool."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:2273
msgid ""
"Please select geometry items \n"
"on which to perform union."
msgstr ""
"Please select geometry items \n"
"on which to perform union."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:2345
msgid "[WARNING_NOTCL]Cancelled. Nothing selected to delete."
msgstr "[WARNING_NOTCL]Cancelled. Nothing selected to delete."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:2412
msgid "[WARNING_NOTCL]Cancelled. Nothing selected to copy."
msgstr "[WARNING_NOTCL]Cancelled. Nothing selected to copy."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:2458
msgid "[WARNING_NOTCL]Cancelled. Nothing selected to move."
msgstr "[WARNING_NOTCL]Cancelled. Nothing selected to move."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:2472
msgid "New Tool ..."
msgstr "New Tool ..."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:2473
msgid "Enter a Tool Diameter:"
msgstr "Enter a Tool Diameter:"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:2772
msgid "Grid X value:"
msgstr "Grid X value:"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:2774
msgid "This is the Grid snap value on X axis."
msgstr "This is the Grid snap value on X axis."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:2779
msgid "Grid Y value:"
msgstr "Grid Y value:"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:2781
msgid "This is the Grid snap value on Y axis."
msgstr "This is the Grid snap value on Y axis."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:2786
msgid "Snap Max:"
msgstr "Snap Max:"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:2791
msgid "Workspace:"
msgstr "Workspace:"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:2793
msgid ""
"Draw a delimiting rectangle on canvas.\n"
"The purpose is to illustrate the limits for our work."
msgstr ""
"Draw a delimiting rectangle on canvas.\n"
"The purpose is to illustrate the limits for our work."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:2796
msgid "Wk. format:"
msgstr "Wk. format:"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:2798
msgid ""
"Select the type of rectangle to be used on canvas,\n"
"as valid workspace."
msgstr ""
"Select the type of rectangle to be used on canvas,\n"
"as valid workspace."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:2811
msgid "Plot Fill:"
msgstr "Plot Fill:"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:2813
msgid ""
"Set the fill color for plotted objects.\n"
"First 6 digits are the color and the last 2\n"
"digits are for alpha (transparency) level."
msgstr ""
"Set the fill color for plotted objects.\n"
"First 6 digits are the color and the last 2\n"
"digits are for alpha (transparency) level."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:2827
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:2877
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:2927
msgid "Alpha Level:"
msgstr "Alpha Level:"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:2829
msgid "Set the fill transparency for plotted objects."
msgstr "Set the fill transparency for plotted objects."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:2846
msgid "Plot Line:"
msgstr "Plot Line:"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:2848
msgid "Set the line color for plotted objects."
msgstr "Set the line color for plotted objects."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:2860
msgid "Sel. Fill:"
msgstr "Sel. Fill:"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:2862
msgid ""
"Set the fill color for the selection box\n"
"in case that the selection is done from left to right.\n"
"First 6 digits are the color and the last 2\n"
"digits are for alpha (transparency) level."
msgstr ""
"Set the fill color for the selection box\n"
"in case that the selection is done from left to right.\n"
"First 6 digits are the color and the last 2\n"
"digits are for alpha (transparency) level."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:2879
msgid "Set the fill transparency for the 'left to right' selection box."
msgstr "Set the fill transparency for the 'left to right' selection box."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:2896
msgid "Sel. Line:"
msgstr "Sel. Line:"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:2898
msgid "Set the line color for the 'left to right' selection box."
msgstr "Set the line color for the 'left to right' selection box."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:2910
msgid "Sel2. Fill:"
msgstr "Sel2. Fill:"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:2912
msgid ""
"Set the fill color for the selection box\n"
"in case that the selection is done from right to left.\n"
"First 6 digits are the color and the last 2\n"
"digits are for alpha (transparency) level."
msgstr ""
"Set the fill color for the selection box\n"
"in case that the selection is done from right to left.\n"
"First 6 digits are the color and the last 2\n"
"digits are for alpha (transparency) level."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:2929
msgid "Set the fill transparency for selection 'right to left' box."
msgstr "Set the fill transparency for selection 'right to left' box."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:2946
msgid "Sel2. Line:"
msgstr "Sel2. Line:"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:2948
msgid "Set the line color for the 'right to left' selection box."
msgstr "Set the line color for the 'right to left' selection box."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:2960
msgid "Editor Draw:"
msgstr "Editor Draw:"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:2962
msgid "Set the color for the shape."
msgstr "Set the color for the shape."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:2974
msgid "Editor Draw Sel.:"
msgstr "Editor Draw Sel.:"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:2976
msgid "Set the color of the shape when selected."
msgstr "Set the color of the shape when selected."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:3023
msgid "GUI Settings"
msgstr "GUI Settings"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:3030
msgid "Layout:"
msgstr "Layout:"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:3032
msgid ""
"Select an layout for FlatCAM.\n"
"It is applied immediately."
msgstr ""
"Select an layout for FlatCAM.\n"
"It is applied immediately."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:3048
msgid "Style:"
msgstr "Style:"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:3050
msgid ""
"Select an style for FlatCAM.\n"
"It will be applied at the next app start."
msgstr ""
"Select an style for FlatCAM.\n"
"It will be applied at the next app start."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:3061
msgid "HDPI Support:"
msgstr "HDPI Support:"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:3063
msgid ""
"Enable High DPI support for FlatCAM.\n"
"It will be applied at the next app start."
msgstr ""
"Enable High DPI support for FlatCAM.\n"
"It will be applied at the next app start."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:3076
msgid "Clear GUI Settings:"
msgstr "Clear GUI Settings:"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:3078
msgid ""
"Clear the GUI settings for FlatCAM,\n"
"such as: layout, gui state, style, hdpi support etc."
msgstr ""
"Clear the GUI settings for FlatCAM,\n"
"such as: layout, gui state, style, hdpi support etc."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:3081
msgid "Clear"
msgstr "Clear"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:3085
msgid "Hover Shape:"
msgstr "Hover Shape:"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:3087
msgid ""
"Enable display of a hover shape for FlatCAM objects.\n"
"It is displayed whenever the mouse cursor is hovering\n"
"over any kind of not-selected object."
msgstr ""
"Enable display of a hover shape for FlatCAM objects.\n"
"It is displayed whenever the mouse cursor is hovering\n"
"over any kind of not-selected object."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:3128
msgid "Are you sure you want to delete the GUI Settings? \n"
msgstr "Are you sure you want to delete the GUI Settings? \n"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:3131
msgid "Clear GUI Settings"
msgstr "Clear GUI Settings"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:3144
msgid "[success] GUI settings deleted ..."
msgstr "[success] GUI settings deleted ..."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:3151
msgid "App Preferences"
msgstr "App Preferences"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:3157
msgid "<b>Units:</b>"
msgstr "<b>Units:</b>"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:3158
msgid ""
"The default value for FlatCAM units.\n"
"Whatever is selected here is set every time\n"
"FLatCAM is started."
msgstr ""
"The default value for FlatCAM units.\n"
"Whatever is selected here is set every time\n"
"FLatCAM is started."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:3165
msgid "<b>APP. LEVEL:</b>"
msgstr "<b>APP. LEVEL:</b>"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:3166
msgid ""
"Choose the default level of usage for FlatCAM.\n"
"BASIC level -> reduced functionality, best for beginner's.\n"
"ADVANCED level -> full functionality.\n"
"\n"
"The choice here will influence the parameters in\n"
"the Selected Tab for all kinds of FlatCAM objects."
msgstr ""
"Choose the default level of usage for FlatCAM.\n"
"BASIC level -> reduced functionality, best for beginner's.\n"
"ADVANCED level -> full functionality.\n"
"\n"
"The choice here will influence the parameters in\n"
"the Selected Tab for all kinds of FlatCAM objects."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:3171
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:3775
msgid "Basic"
msgstr "Basic"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:3172
msgid "Advanced"
msgstr "Advanced"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:3175
msgid "<b>Languages:</b>"
msgstr "<b>Languages:</b>"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:3176
msgid "Set the language used throughout FlatCAM."
msgstr "Set the language used throughout FlatCAM."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:3179
msgid "Apply Language"
msgstr "Apply Language"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:3182
msgid "Shell at StartUp:"
msgstr "Shell at StartUp:"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:3184
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:3189
msgid ""
"Check this box if you want the shell to\n"
"start automatically at startup."
msgstr ""
"Check this box if you want the shell to\n"
"start automatically at startup."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:3194
msgid "Version Check:"
msgstr "Version Check:"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:3196
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:3201
msgid ""
"Check this box if you want to check\n"
"for a new version automatically at startup."
msgstr ""
"Check this box if you want to check\n"
"for a new version automatically at startup."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:3206
msgid "Send Stats:"
msgstr "Send Stats:"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:3208
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:3213
msgid ""
"Check this box if you agree to send anonymous\n"
"stats automatically at startup, to help improve FlatCAM."
msgstr ""
"Check this box if you agree to send anonymous\n"
"stats automatically at startup, to help improve FlatCAM."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:3220
msgid "<b>Pan Button:</b>"
msgstr "<b>Pan Button:</b>"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:3221
msgid ""
"Select the mouse button to use for panning:\n"
"- MMB --> Middle Mouse Button\n"
"- RMB --> Right Mouse Button"
msgstr ""
"Select the mouse button to use for panning:\n"
"- MMB --> Middle Mouse Button\n"
"- RMB --> Right Mouse Button"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:3224
msgid "MMB"
msgstr "MMB"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:3225
msgid "RMB"
msgstr "RMB"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:3228
msgid "<b>Multiple Sel:</b>"
msgstr "<b>Multiple Sel:</b>"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:3229
msgid "Select the key used for multiple selection."
msgstr "Select the key used for multiple selection."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:3230
msgid "CTRL"
msgstr "CTRL"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:3231
msgid "SHIFT"
msgstr "SHIFT"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:3234
msgid "Project at StartUp:"
msgstr "Project at StartUp:"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:3236
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:3241
msgid ""
"Check this box if you want the project/selected/tool tab area to\n"
"to be shown automatically at startup."
msgstr ""
"Check this box if you want the project/selected/tool tab area to\n"
"to be shown automatically at startup."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:3246
msgid "Project AutoHide:"
msgstr "Project AutoHide:"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:3248
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:3254
msgid ""
"Check this box if you want the project/selected/tool tab area to\n"
"hide automatically when there are no objects loaded and\n"
"to show whenever a new object is created."
msgstr ""
"Check this box if you want the project/selected/tool tab area to\n"
"hide automatically when there are no objects loaded and\n"
"to show whenever a new object is created."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:3260
msgid "<b>Enable ToolTips:</b>"
msgstr "<b>Enable ToolTips:</b>"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:3262
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:3267
msgid ""
"Check this box if you want to have toolTips displayed\n"
"when hovering with mouse over items throughout the App."
msgstr ""
"Check this box if you want to have toolTips displayed\n"
"when hovering with mouse over items throughout the App."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:3301
msgid "Save Compressed Project"
msgstr "Save Compressed Project"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:3303
msgid ""
"Whether to save a compressed or uncompressed project.\n"
"When checked it will save a compressed FlatCAM project."
msgstr ""
"Whether to save a compressed or uncompressed project.\n"
"When checked it will save a compressed FlatCAM project."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:3314
msgid "Compression Level:"
msgstr "Compression Level:"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:3316
msgid ""
"The level of compression used when saving\n"
"a FlatCAM project. Higher value means better compression\n"
"but require more RAM usage and more processing time."
msgstr ""
"The level of compression used when saving\n"
"a FlatCAM project. Higher value means better compression\n"
"but require more RAM usage and more processing time."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:3342
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:3583
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:4238
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:4562
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:149
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:575
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:900
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:1414
msgid "<b>Plot Options:</b>"
msgstr "<b>Plot Options:</b>"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:3349
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:3595
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:576
msgid "Solid"
msgstr "Solid"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:3351
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:157
msgid "Solid color polygons."
msgstr "Solid color polygons."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:3356
msgid "M-Color"
msgstr "M-Color"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:3358
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:165
msgid "Draw polygons in different colors."
msgstr "Draw polygons in different colors."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:3363
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:3589
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:4242
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:171
msgid "Plot"
msgstr "Plot"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:3365
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:4244
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:173
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:616
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:946
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:1500
msgid "Plot (show) this object."
msgstr "Plot (show) this object."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:3370
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:4251
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:4598
msgid "Circle Steps:"
msgstr "Circle Steps:"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:3372
msgid ""
"The number of circle steps for Gerber \n"
"circular aperture linear approximation."
msgstr ""
"The number of circle steps for Gerber \n"
"circular aperture linear approximation."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:3387
msgid "Gerber Options"
msgstr "Gerber Options"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:3391
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:321
msgid "<b>Isolation Routing:</b>"
msgstr "<b>Isolation Routing:</b>"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:3393
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:323
msgid ""
"Create a Geometry object with\n"
"toolpaths to cut outside polygons."
msgstr ""
"Create a Geometry object with\n"
"toolpaths to cut outside polygons."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:3404
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:3961
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:4886
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:855
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:871
msgid "Diameter of the cutting tool."
msgstr "Diameter of the cutting tool."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:3411
msgid "Width (# passes):"
msgstr "Width (# passes):"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:3413
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:345
msgid ""
"Width of the isolation gap in\n"
"number (integer) of tool widths."
msgstr ""
"Width of the isolation gap in\n"
"number (integer) of tool widths."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:3421
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:353
msgid "Pass overlap:"
msgstr "Pass overlap:"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:3423
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:355
msgid ""
"How much (fraction) of the tool width to overlap each tool pass.\n"
"Example:\n"
"A value here of 0.25 means an overlap of 25% from the tool diameter found "
"above."
msgstr ""
"How much (fraction) of the tool width to overlap each tool pass.\n"
"Example:\n"
"A value here of 0.25 means an overlap of 25% from the tool diameter found "
"above."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:3431
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:365
msgid "Milling Type:"
msgstr "Milling Type:"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:3433
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:367
msgid ""
"Milling type:\n"
"- climb / best for precision milling and to reduce tool usage\n"
"- conventional / useful when there is no backlash compensation"
msgstr ""
"Milling type:\n"
"- climb / best for precision milling and to reduce tool usage\n"
"- conventional / useful when there is no backlash compensation"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:3438
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:372
msgid "Climb"
msgstr "Climb"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:3439
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:373
msgid "Conv."
msgstr "Conv."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:3443
msgid "Combine Passes"
msgstr "Combine Passes"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:3445
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:379
msgid "Combine all passes into one object"
msgstr "Combine all passes into one object"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:3450
msgid "<b>Clear non-copper:</b>"
msgstr "<b>Clear non-copper:</b>"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:3452
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:4774
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:456
msgid ""
"Create a Geometry object with\n"
"toolpaths to cut all non-copper regions."
msgstr ""
"Create a Geometry object with\n"
"toolpaths to cut all non-copper regions."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:3461
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:3487
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:500
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:534
msgid "Boundary Margin:"
msgstr "Boundary Margin:"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:3463
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:502
msgid ""
"Specify the edge of the PCB\n"
"by drawing a box around all\n"
"objects with this minimum\n"
"distance."
msgstr ""
"Specify the edge of the PCB\n"
"by drawing a box around all\n"
"objects with this minimum\n"
"distance."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:3473
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:3496
msgid "Rounded corners"
msgstr "Rounded corners"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:3475
msgid ""
"Creates a Geometry objects with polygons\n"
"covering the copper-free areas of the PCB."
msgstr ""
"Creates a Geometry objects with polygons\n"
"covering the copper-free areas of the PCB."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:3481
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:524
msgid "<b>Bounding Box:</b>"
msgstr "<b>Bounding Box:</b>"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:3489
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:536
msgid ""
"Distance of the edges of the box\n"
"to the nearest polygon."
msgstr ""
"Distance of the edges of the box\n"
"to the nearest polygon."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:3498
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:546
msgid ""
"If the bounding box is \n"
"to have rounded corners\n"
"their radius is equal to\n"
"the margin."
msgstr ""
"If the bounding box is \n"
"to have rounded corners\n"
"their radius is equal to\n"
"the margin."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:3512
msgid "Gerber Adv. Options"
msgstr "Gerber Adv. Options"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:3516
msgid "<b>Advanced Param.:</b>"
msgstr "<b>Advanced Param.:</b>"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:3518
msgid ""
"A list of Gerber advanced parameters.\n"
"Those parameters are available only for\n"
"Advanced App. Level."
msgstr ""
"A list of Gerber advanced parameters.\n"
"Those parameters are available only for\n"
"Advanced App. Level."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:3528
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:384
msgid "\"Follow\""
msgstr "\"Follow\""

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:3530
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:386
msgid ""
"Generate a 'Follow' geometry.\n"
"This means that it will cut through\n"
"the middle of the trace."
msgstr ""
"Generate a 'Follow' geometry.\n"
"This means that it will cut through\n"
"the middle of the trace."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:3538
msgid "Table Show/Hide"
msgstr "Table Show/Hide"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:3540
msgid ""
"Toggle the display of the Gerber Apertures Table.\n"
"Also, on hide, it will delete all mark shapes\n"
"that are drawn on canvas."
msgstr ""
"Toggle the display of the Gerber Apertures Table.\n"
"Also, on hide, it will delete all mark shapes\n"
"that are drawn on canvas."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:3548
msgid "Ap. Scale Factor:"
msgstr "Ap. Scale Factor:"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:3550
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:253
msgid ""
"Change the size of the selected apertures.\n"
"Factor by which to multiply\n"
"geometric features of this object."
msgstr ""
"Change the size of the selected apertures.\n"
"Factor by which to multiply\n"
"geometric features of this object."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:3560
msgid "Ap. Buffer Factor:"
msgstr "Ap. Buffer Factor:"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:3562
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:274
msgid ""
"Change the size of the selected apertures.\n"
"Factor by which to expand/shrink\n"
"geometric features of this object."
msgstr ""
"Change the size of the selected apertures.\n"
"Factor by which to expand/shrink\n"
"geometric features of this object."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:3580
msgid "Excellon General"
msgstr "Excellon General"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:3602
msgid "<b>Excellon Format:</b>"
msgstr "<b>Excellon Format:</b>"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:3604
msgid ""
"The NC drill files, usually named Excellon files\n"
"are files that can be found in different formats.\n"
"Here we set the format used when the provided\n"
"coordinates are not using period.\n"
"\n"
"Possible presets:\n"
"\n"
"PROTEUS 3:3 MM LZ\n"
"DipTrace 5:2 MM TZ\n"
"DipTrace 4:3 MM LZ\n"
"\n"
"EAGLE 3:3 MM TZ\n"
"EAGLE 4:3 MM TZ\n"
"EAGLE 2:5 INCH TZ\n"
"EAGLE 3:5 INCH TZ\n"
"\n"
"ALTIUM 2:4 INCH LZ\n"
"Sprint Layout 2:4 INCH LZ\n"
"KiCAD 3:5 INCH TZ"
msgstr ""
"The NC drill files, usually named Excellon files\n"
"are files that can be found in different formats.\n"
"Here we set the format used when the provided\n"
"coordinates are not using period.\n"
"\n"
"Possible presets:\n"
"\n"
"PROTEUS 3:3 MM LZ\n"
"DipTrace 5:2 MM TZ\n"
"DipTrace 4:3 MM LZ\n"
"\n"
"EAGLE 3:3 MM TZ\n"
"EAGLE 4:3 MM TZ\n"
"EAGLE 2:5 INCH TZ\n"
"EAGLE 3:5 INCH TZ\n"
"\n"
"ALTIUM 2:4 INCH LZ\n"
"Sprint Layout 2:4 INCH LZ\n"
"KiCAD 3:5 INCH TZ"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:3629
msgid "INCH:"
msgstr "INCH:"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:3632
msgid "Default values for INCH are 2:4"
msgstr "Default values for INCH are 2:4"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:3640
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:3673
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:4150
msgid ""
"This numbers signify the number of digits in\n"
"the whole part of Excellon coordinates."
msgstr ""
"This numbers signify the number of digits in\n"
"the whole part of Excellon coordinates."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:3654
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:3687
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:4164
msgid ""
"This numbers signify the number of digits in\n"
"the decimal part of Excellon coordinates."
msgstr ""
"This numbers signify the number of digits in\n"
"the decimal part of Excellon coordinates."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:3662
msgid "METRIC:"
msgstr "METRIC:"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:3665
msgid "Default values for METRIC are 3:3"
msgstr "Default values for METRIC are 3:3"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:3696
msgid "Default <b>Zeros</b>:"
msgstr "Default <b>Zeros</b>:"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:3699
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:4199
msgid ""
"This sets the type of Excellon zeros.\n"
"If LZ then Leading Zeros are kept and\n"
"Trailing Zeros are removed.\n"
"If TZ is checked then Trailing Zeros are kept\n"
"and Leading Zeros are removed."
msgstr ""
"This sets the type of Excellon zeros.\n"
"If LZ then Leading Zeros are kept and\n"
"Trailing Zeros are removed.\n"
"If TZ is checked then Trailing Zeros are kept\n"
"and Leading Zeros are removed."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:3707
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:4206
msgid "LZ"
msgstr "LZ"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:3708
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:4207
msgid "TZ"
msgstr "TZ"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:3710
msgid ""
"This sets the default type of Excellon zeros.\n"
"If it is not detected in the parsed file the value here\n"
"will be used.If LZ then Leading Zeros are kept and\n"
"Trailing Zeros are removed.\n"
"If TZ is checked then Trailing Zeros are kept\n"
"and Leading Zeros are removed."
msgstr ""
"This sets the default type of Excellon zeros.\n"
"If it is not detected in the parsed file the value here\n"
"will be used.If LZ then Leading Zeros are kept and\n"
"Trailing Zeros are removed.\n"
"If TZ is checked then Trailing Zeros are kept\n"
"and Leading Zeros are removed."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:3724
msgid "Default <b>Units</b>:"
msgstr "Default <b>Units</b>:"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:3727
msgid ""
"This sets the default units of Excellon files.\n"
"If it is not detected in the parsed file the value here\n"
"will be used.Some Excellon files don't have an header\n"
"therefore this parameter will be used."
msgstr ""
"This sets the default units of Excellon files.\n"
"If it is not detected in the parsed file the value here\n"
"will be used.Some Excellon files don't have an header\n"
"therefore this parameter will be used."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:3735
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:4126
msgid "INCH"
msgstr "INCH"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:3736
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:4127
msgid "MM"
msgstr "MM"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:3738
msgid ""
"This sets the units of Excellon files.\n"
"Some Excellon files don't have an header\n"
"therefore this parameter will be used."
msgstr ""
"This sets the units of Excellon files.\n"
"Some Excellon files don't have an header\n"
"therefore this parameter will be used."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:3754
msgid "<b>Excellon Optimization:</b>"
msgstr "<b>Excellon Optimization:</b>"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:3761
msgid "Algorithm:   "
msgstr "Algorithm:   "

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:3764
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:3777
msgid ""
"This sets the optimization type for the Excellon drill path.\n"
"If MH is checked then Google OR-Tools algorithm with MetaHeuristic\n"
"Guided Local Path is used. Default search time is 3sec.\n"
"Use set_sys excellon_search_time value Tcl Command to set other values.\n"
"If Basic is checked then Google OR-Tools Basic algorithm is used.\n"
"\n"
"If DISABLED, then FlatCAM works in 32bit mode and it uses \n"
"Travelling Salesman algorithm for path optimization."
msgstr ""
"This sets the optimization type for the Excellon drill path.\n"
"If MH is checked then Google OR-Tools algorithm with MetaHeuristic\n"
"Guided Local Path is used. Default search time is 3sec.\n"
"Use set_sys excellon_search_time value Tcl Command to set other values.\n"
"If Basic is checked then Google OR-Tools Basic algorithm is used.\n"
"\n"
"If DISABLED, then FlatCAM works in 32bit mode and it uses \n"
"Travelling Salesman algorithm for path optimization."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:3774
msgid "MH"
msgstr "MH"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:3789
msgid "Optimization Time:   "
msgstr "Optimization Time:   "

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:3792
msgid ""
"When OR-Tools Metaheuristic (MH) is enabled there is a\n"
"maximum threshold for how much time is spent doing the\n"
"path optimization. This max duration is set here.\n"
"In seconds."
msgstr ""
"When OR-Tools Metaheuristic (MH) is enabled there is a\n"
"maximum threshold for how much time is spent doing the\n"
"path optimization. This max duration is set here.\n"
"In seconds."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:3833
msgid "Excellon Options"
msgstr "Excellon Options"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:3836
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:654
msgid "<b>Create CNC Job</b>"
msgstr "<b>Create CNC Job</b>"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:3838
msgid ""
"Parameters used to create a CNC Job object\n"
"for this drill object."
msgstr ""
"Parameters used to create a CNC Job object\n"
"for this drill object."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:3846
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:4302
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:5301
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:665
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:1129
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolCalculators.py:108
msgid "Cut Z:"
msgstr "Cut Z:"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:3848
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:667
msgid ""
"Drill depth (negative)\n"
"below the copper surface."
msgstr ""
"Drill depth (negative)\n"
"below the copper surface."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:3855
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:4335
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:675
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:1165
msgid "Travel Z:"
msgstr "Travel Z:"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:3857
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:677
msgid ""
"Tool height when travelling\n"
"across the XY plane."
msgstr ""
"Tool height when travelling\n"
"across the XY plane."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:3865
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:4345
msgid "Tool change:"
msgstr "Tool change:"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:3867
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:4347
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:687
msgid ""
"Include tool-change sequence\n"
"in G-Code (Pause for tool change)."
msgstr ""
"Include tool-change sequence\n"
"in G-Code (Pause for tool change)."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:3874
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:4355
msgid "Toolchange Z:"
msgstr "Toolchange Z:"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:3876
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:4357
msgid "Toolchange Z position."
msgstr "Toolchange Z position."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:3882
msgid "Feedrate:"
msgstr "Feedrate:"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:3884
msgid ""
"Tool speed while drilling\n"
"(in units per minute)."
msgstr ""
"Tool speed while drilling\n"
"(in units per minute)."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:3892
msgid "Spindle Speed:"
msgstr "Spindle Speed:"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:3894
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:4387
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:751
msgid ""
"Speed of the spindle\n"
"in RPM (optional)"
msgstr ""
"Speed of the spindle\n"
"in RPM (optional)"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:3902
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:4395
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:759
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:1288
msgid "Dwell:"
msgstr "Dwell:"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:3904
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:4397
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:761
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:1290
msgid ""
"Pause to allow the spindle to reach its\n"
"speed before cutting."
msgstr ""
"Pause to allow the spindle to reach its\n"
"speed before cutting."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:3907
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:4400
msgid "Duration:"
msgstr "Duration:"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:3909
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:4402
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:766
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:1297
msgid "Number of milliseconds for spindle to dwell."
msgstr "Number of milliseconds for spindle to dwell."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:3921
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:4412
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:774
msgid "Postprocessor:"
msgstr "Postprocessor:"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:3923
msgid ""
"The postprocessor file that dictates\n"
"gcode output."
msgstr ""
"The postprocessor file that dictates\n"
"gcode output."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:3933
msgid "<b>Gcode:    </b>"
msgstr "<b>Gcode:    </b>"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:3935
msgid ""
"Choose what to use for GCode generation:\n"
"'Drills', 'Slots' or 'Both'.\n"
"When choosing 'Slots' or 'Both', slots will be\n"
"converted to drills."
msgstr ""
"Choose what to use for GCode generation:\n"
"'Drills', 'Slots' or 'Both'.\n"
"When choosing 'Slots' or 'Both', slots will be\n"
"converted to drills."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:3940
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:626
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:822
msgid "Drills"
msgstr "Drills"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:3941
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:626
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:823
msgid "Slots"
msgstr "Slots"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:3942
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:824
msgid "Both"
msgstr "Both"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:3951
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:839
msgid "<b>Mill Holes</b>"
msgstr "<b>Mill Holes</b>"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:3953
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:841
msgid "Create Geometry for milling holes."
msgstr "Create Geometry for milling holes."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:3959
msgid "Drill Tool dia:"
msgstr "Drill Tool dia:"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:3966
msgid "Slot Tool dia:"
msgstr "Slot Tool dia:"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:3968
msgid ""
"Diameter of the cutting tool\n"
"when milling slots."
msgstr ""
"Diameter of the cutting tool\n"
"when milling slots."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:3980
msgid "Defaults"
msgstr "Defaults"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:3993
msgid "Excellon Adv. Options"
msgstr "Excellon Adv. Options"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:3999
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:4435
msgid "<b>Advanced Options:</b>"
msgstr "<b>Advanced Options:</b>"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:4001
msgid ""
"Parameters used to create a CNC Job object\n"
"for this drill object that are shown when App Level is Advanced."
msgstr ""
"Parameters used to create a CNC Job object\n"
"for this drill object that are shown when App Level is Advanced."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:4009
msgid "Offset Z:"
msgstr "Offset Z:"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:4011
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:644
msgid ""
"Some drill bits (the larger ones) need to drill deeper\n"
"to create the desired exit hole diameter due of the tip shape.\n"
"The value here can compensate the Cut Z parameter."
msgstr ""
"Some drill bits (the larger ones) need to drill deeper\n"
"to create the desired exit hole diameter due of the tip shape.\n"
"The value here can compensate the Cut Z parameter."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:4018
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:4446
msgid "Toolchange X,Y:"
msgstr "Toolchange X,Y:"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:4020
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:4448
msgid "Toolchange X,Y position."
msgstr "Toolchange X,Y position."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:4026
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:4455
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:704
msgid "Start move Z:"
msgstr "Start move Z:"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:4028
msgid ""
"Height of the tool just after start.\n"
"Delete the value if you don't need this feature."
msgstr ""
"Height of the tool just after start.\n"
"Delete the value if you don't need this feature."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:4035
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:4465
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:714
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:1211
msgid "End move Z:"
msgstr "End move Z:"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:4037
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:4467
msgid ""
"Height of the tool after\n"
"the last move at the end of the job."
msgstr ""
"Height of the tool after\n"
"the last move at the end of the job."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:4044
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:4475
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:735
msgid "Feedrate Rapids:"
msgstr "Feedrate Rapids:"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:4046
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:737
msgid ""
"Tool speed while drilling\n"
"(in units per minute).\n"
"This is for the rapid move G00.\n"
"It is useful only for Marlin,\n"
"ignore for any other cases."
msgstr ""
"Tool speed while drilling\n"
"(in units per minute).\n"
"This is for the rapid move G00.\n"
"It is useful only for Marlin,\n"
"ignore for any other cases."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:4057
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:4499
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:785
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:1320
msgid "Probe Z depth:"
msgstr "Probe Z depth:"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:4059
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:4501
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:787
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:1322
msgid ""
"The maximum depth that the probe is allowed\n"
"to probe. Negative value, in current units."
msgstr ""
"The maximum depth that the probe is allowed\n"
"to probe. Negative value, in current units."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:4067
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:4509
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:797
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:1334
msgid "Feedrate Probe:"
msgstr "Feedrate Probe:"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:4069
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:4511
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:799
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:1336
msgid "The feedrate used while the probe is probing."
msgstr "The feedrate used while the probe is probing."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:4075
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:4518
msgid "Fast Plunge:"
msgstr "Fast Plunge:"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:4077
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:4520
msgid ""
"By checking this, the vertical move from\n"
"Z_Toolchange to Z_move is done with G0,\n"
"meaning the fastest speed available.\n"
"WARNING: the move is done at Toolchange X,Y coords."
msgstr ""
"By checking this, the vertical move from\n"
"Z_Toolchange to Z_move is done with G0,\n"
"meaning the fastest speed available.\n"
"WARNING: the move is done at Toolchange X,Y coords."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:4086
msgid "Fast Retract:"
msgstr "Fast Retract:"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:4088
msgid ""
"Exit hole strategy.\n"
" - When uncheked, while exiting the drilled hole the drill bit\n"
"will travel slow, with set feedrate (G1), up to zero depth and then\n"
"travel as fast as possible (G0) to the Z Move (travel height).\n"
" - When checked the travel from Z cut (cut depth) to Z_move\n"
"(travel height) is done as fast as possible (G0) in one move."
msgstr ""
"Exit hole strategy.\n"
" - When uncheked, while exiting the drilled hole the drill bit\n"
"will travel slow, with set feedrate (G1), up to zero depth and then\n"
"travel as fast as possible (G0) to the Z Move (travel height).\n"
" - When checked the travel from Z cut (cut depth) to Z_move\n"
"(travel height) is done as fast as possible (G0) in one move."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:4107
msgid "Excellon Export"
msgstr "Excellon Export"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:4110
msgid "<b>Export Options:</b>"
msgstr "<b>Export Options:</b>"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:4112
msgid ""
"The parameters set here are used in the file exported\n"
"when using the File -> Export -> Export Excellon menu entry."
msgstr ""
"The parameters set here are used in the file exported\n"
"when using the File -> Export -> Export Excellon menu entry."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:4121
msgid "<b>Units</b>:"
msgstr "<b>Units</b>:"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:4123
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:4129
msgid "The units used in the Excellon file."
msgstr "The units used in the Excellon file."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:4135
msgid "<b>Int/Decimals:</b>"
msgstr "<b>Int/Decimals:</b>"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:4137
msgid ""
"The NC drill files, usually named Excellon files\n"
"are files that can be found in different formats.\n"
"Here we set the format used when the provided\n"
"coordinates are not using period."
msgstr ""
"The NC drill files, usually named Excellon files\n"
"are files that can be found in different formats.\n"
"Here we set the format used when the provided\n"
"coordinates are not using period."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:4173
msgid "<b>Format:</b>"
msgstr "<b>Format:</b>"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:4175
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:4185
msgid ""
"Select the kind of coordinates format used.\n"
"Coordinates can be saved with decimal point or without.\n"
"When there is no decimal point, it is required to specify\n"
"the number of digits for integer part and the number of decimals.\n"
"Also it will have to be specified if LZ = leading zeros are kept\n"
"or TZ = trailing zeros are kept."
msgstr ""
"Select the kind of coordinates format used.\n"
"Coordinates can be saved with decimal point or without.\n"
"When there is no decimal point, it is required to specify\n"
"the number of digits for integer part and the number of decimals.\n"
"Also it will have to be specified if LZ = leading zeros are kept\n"
"or TZ = trailing zeros are kept."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:4182
msgid "Decimal"
msgstr "Decimal"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:4183
msgid "No-Decimal"
msgstr "No-Decimal"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:4196
msgid "<b>Zeros</b>:"
msgstr "<b>Zeros</b>:"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:4209
msgid ""
"This sets the default type of Excellon zeros.\n"
"If LZ then Leading Zeros are kept and\n"
"Trailing Zeros are removed.\n"
"If TZ is checked then Trailing Zeros are kept\n"
"and Leading Zeros are removed."
msgstr ""
"This sets the default type of Excellon zeros.\n"
"If LZ then Leading Zeros are kept and\n"
"Trailing Zeros are removed.\n"
"If TZ is checked then Trailing Zeros are kept\n"
"and Leading Zeros are removed."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:4235
msgid "Geometry General"
msgstr "Geometry General"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:4253
msgid ""
"The number of circle steps for <b>Geometry</b> \n"
"circle and arc shapes linear approximation."
msgstr ""
"The number of circle steps for <b>Geometry</b> \n"
"circle and arc shapes linear approximation."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:4261
msgid "<b>Tools</b>"
msgstr "<b>Tools</b>"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:4268
msgid "Tool dia:                   "
msgstr "Tool dia:                   "

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:4270
msgid ""
"The diameter of the cutting\n"
"tool.."
msgstr ""
"The diameter of the cutting\n"
"tool.."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:4285
msgid "Geometry Options"
msgstr "Geometry Options"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:4290
msgid "<b>Create CNC Job:</b>"
msgstr "<b>Create CNC Job:</b>"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:4292
msgid ""
"Create a CNC Job object\n"
"tracing the contours of this\n"
"Geometry object."
msgstr ""
"Create a CNC Job object\n"
"tracing the contours of this\n"
"Geometry object."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:4304
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:1131
msgid ""
"Cutting depth (negative)\n"
"below the copper surface."
msgstr ""
"Cutting depth (negative)\n"
"below the copper surface."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:4312
msgid "Multidepth"
msgstr "Multidepth"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:4314
msgid "Multidepth usage: True or False."
msgstr "Multidepth usage: True or False."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:4319
msgid "Depth/Pass:"
msgstr "Depth/Pass:"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:4321
msgid ""
"The depth to cut on each pass,\n"
"when multidepth is enabled.\n"
"It has positive value although\n"
"it is a fraction from the depth\n"
"which has negative value."
msgstr ""
"The depth to cut on each pass,\n"
"when multidepth is enabled.\n"
"It has positive value although\n"
"it is a fraction from the depth\n"
"which has negative value."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:4337
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:1167
msgid ""
"Height of the tool when\n"
"moving without cutting."
msgstr ""
"Height of the tool when\n"
"moving without cutting."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:4364
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:1223
msgid "Feed Rate X-Y:"
msgstr "Feed Rate X-Y:"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:4366
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:1225
msgid ""
"Cutting speed in the XY\n"
"plane in units per minute"
msgstr ""
"Cutting speed in the XY\n"
"plane in units per minute"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:4374
msgid "Feed Rate Z:"
msgstr "Feed Rate Z:"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:4376
msgid ""
"Cutting speed in the XY\n"
"plane in units per minute.\n"
"It is called also Plunge."
msgstr ""
"Cutting speed in the XY\n"
"plane in units per minute.\n"
"It is called also Plunge."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:4385
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:749
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:1275
msgid "Spindle speed:"
msgstr "Spindle speed:"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:4414
msgid ""
"The postprocessor file that dictates\n"
"Machine Code output."
msgstr ""
"The postprocessor file that dictates\n"
"Machine Code output."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:4430
msgid "Geometry Adv. Options"
msgstr "Geometry Adv. Options"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:4437
msgid ""
"Parameters to create a CNC Job object\n"
"tracing the contours of a Geometry object."
msgstr ""
"Parameters to create a CNC Job object\n"
"tracing the contours of a Geometry object."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:4457
msgid ""
"Height of the tool just after starting the work.\n"
"Delete the value if you don't need this feature."
msgstr ""
"Height of the tool just after starting the work.\n"
"Delete the value if you don't need this feature."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:4477
msgid ""
"Cutting speed in the XY plane\n"
"(in units per minute).\n"
"This is for the rapid move G00.\n"
"It is useful only for Marlin,\n"
"ignore for any other cases."
msgstr ""
"Cutting speed in the XY plane\n"
"(in units per minute).\n"
"This is for the rapid move G00.\n"
"It is useful only for Marlin,\n"
"ignore for any other cases."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:4489
msgid "Re-cut 1st pt."
msgstr "Re-cut 1st pt."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:4491
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:1265
msgid ""
"In order to remove possible\n"
"copper leftovers where first cut\n"
"meet with last cut, we generate an\n"
"extended cut over the first cut section."
msgstr ""
"In order to remove possible\n"
"copper leftovers where first cut\n"
"meet with last cut, we generate an\n"
"extended cut over the first cut section."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:4530
msgid "Seg. X size:"
msgstr "Seg. X size:"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:4532
msgid ""
"The size of the trace segment on the X axis.\n"
"Useful for auto-leveling.\n"
"A value of 0 means no segmentation on the X axis."
msgstr ""
"The size of the trace segment on the X axis.\n"
"Useful for auto-leveling.\n"
"A value of 0 means no segmentation on the X axis."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:4541
msgid "Seg. Y size:"
msgstr "Seg. Y size:"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:4543
msgid ""
"The size of the trace segment on the Y axis.\n"
"Useful for auto-leveling.\n"
"A value of 0 means no segmentation on the Y axis."
msgstr ""
"The size of the trace segment on the Y axis.\n"
"Useful for auto-leveling.\n"
"A value of 0 means no segmentation on the Y axis."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:4559
msgid "CNC Job General"
msgstr "CNC Job General"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:4572
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:614
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:944
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:1498
msgid "Plot Object"
msgstr "Plot Object"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:4579
msgid "Plot kind:"
msgstr "Plot kind:"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:4581
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:1419
msgid ""
"This selects the kind of geometries on the canvas to plot.\n"
"Those can be either of type 'Travel' which means the moves\n"
"above the work piece or it can be of type 'Cut',\n"
"which means the moves that cut into the material."
msgstr ""
"This selects the kind of geometries on the canvas to plot.\n"
"Those can be either of type 'Travel' which means the moves\n"
"above the work piece or it can be of type 'Cut',\n"
"which means the moves that cut into the material."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:4589
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:1429
msgid "Travel"
msgstr "Travel"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:4600
msgid ""
"The number of circle steps for <b>GCode</b> \n"
"circle and arc shapes linear approximation."
msgstr ""
"The number of circle steps for <b>GCode</b> \n"
"circle and arc shapes linear approximation."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:4610
msgid ""
"Diameter of the tool to be\n"
"rendered in the plot."
msgstr ""
"Diameter of the tool to be\n"
"rendered in the plot."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:4618
msgid "Coords dec.:"
msgstr "Coords dec.:"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:4620
msgid ""
"The number of decimals to be used for \n"
"the X, Y, Z coordinates in CNC code (GCODE, etc.)"
msgstr ""
"The number of decimals to be used for \n"
"the X, Y, Z coordinates in CNC code (GCODE, etc.)"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:4628
msgid "Feedrate dec.:"
msgstr "Feedrate dec.:"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:4630
msgid ""
"The number of decimals to be used for \n"
"the Feedrate parameter in CNC code (GCODE, etc.)"
msgstr ""
"The number of decimals to be used for \n"
"the Feedrate parameter in CNC code (GCODE, etc.)"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:4645
msgid "CNC Job Options"
msgstr "CNC Job Options"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:4648
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:4689
msgid "<b>Export G-Code:</b>"
msgstr "<b>Export G-Code:</b>"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:4650
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:4691
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:1534
msgid ""
"Export and save G-Code to\n"
"make this object to a file."
msgstr ""
"Export and save G-Code to\n"
"make this object to a file."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:4656
msgid "Prepend to G-Code:"
msgstr "Prepend to G-Code:"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:4658
msgid ""
"Type here any G-Code commands you would\n"
"like to add at the beginning of the G-Code file."
msgstr ""
"Type here any G-Code commands you would\n"
"like to add at the beginning of the G-Code file."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:4667
msgid "Append to G-Code:"
msgstr "Append to G-Code:"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:4669
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:1555
msgid ""
"Type here any G-Code commands you would\n"
"like to append to the generated file.\n"
"I.e.: M2 (End of program)"
msgstr ""
"Type here any G-Code commands you would\n"
"like to append to the generated file.\n"
"I.e.: M2 (End of program)"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:4686
msgid "CNC Job Adv. Options"
msgstr "CNC Job Adv. Options"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:4697
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:1574
msgid "Toolchange G-Code:"
msgstr "Toolchange G-Code:"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:4699
msgid ""
"Type here any G-Code commands you would\n"
"like to be executed when Toolchange event is encountered.\n"
"This will constitute a Custom Toolchange GCode,\n"
"or a Toolchange Macro."
msgstr ""
"Type here any G-Code commands you would\n"
"like to be executed when Toolchange event is encountered.\n"
"This will constitute a Custom Toolchange GCode,\n"
"or a Toolchange Macro."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:4713
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:1596
msgid "Use Toolchange Macro"
msgstr "Use Toolchange Macro"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:4715
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:1598
msgid ""
"Check this box if you want to use\n"
"a Custom Toolchange GCode (macro)."
msgstr ""
"Check this box if you want to use\n"
"a Custom Toolchange GCode (macro)."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:4727
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:1614
msgid ""
"A list of the FlatCAM variables that can be used\n"
"in the Toolchange event.\n"
"They have to be surrounded by the '%' symbol"
msgstr ""
"A list of the FlatCAM variables that can be used\n"
"in the Toolchange event.\n"
"They have to be surrounded by the '%' symbol"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:4734
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:1623
msgid "Parameters"
msgstr "Parameters"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:4737
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:1626
msgid "FlatCAM CNC parameters"
msgstr "FlatCAM CNC parameters"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:4738
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:1627
msgid "tool = tool number"
msgstr "tool = tool number"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:4739
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:1628
msgid "tooldia = tool diameter"
msgstr "tooldia = tool diameter"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:4740
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:1629
msgid "t_drills = for Excellon, total number of drills"
msgstr "t_drills = for Excellon, total number of drills"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:4741
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:1630
msgid "x_toolchange = X coord for Toolchange"
msgstr "x_toolchange = X coord for Toolchange"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:4742
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:1631
msgid "y_toolchange = Y coord for Toolchange"
msgstr "y_toolchange = Y coord for Toolchange"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:4743
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:1632
msgid "z_toolchange = Z coord for Toolchange"
msgstr "z_toolchange = Z coord for Toolchange"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:4744
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:1633
msgid "z_cut = Z coord for Toolchange"
msgstr "z_cut = Z coord for Toolchange"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:4745
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:1634
msgid "z_move = Z coord for Toolchange"
msgstr "z_move = Z coord for Toolchange"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:4746
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:1635
msgid "z_depthpercut = the step value for multidepth cut"
msgstr "z_depthpercut = the step value for multidepth cut"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:4747
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:1636
msgid "spindlesspeed = the value for the spindle speed"
msgstr "spindlesspeed = the value for the spindle speed"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:4748
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:1637
msgid "dwelltime = time to dwell to allow the spindle to reach it's set RPM"
msgstr "dwelltime = time to dwell to allow the spindle to reach it's set RPM"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:4769
msgid "NCC Tool Options"
msgstr "NCC Tool Options"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:4772
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:4873
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:4943
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:5002
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:5105
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:5166
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:5365
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:5492
msgid "<b>Parameters:</b>"
msgstr "<b>Parameters:</b>"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:4782
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:5503
msgid "Tools dia:"
msgstr "Tools dia:"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:4784
msgid "Diameters of the cutting tools, separated by ','"
msgstr "Diameters of the cutting tools, separated by ','"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:4792
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolNonCopperClear.py:166
msgid ""
"How much (fraction) of the tool width to overlap each tool pass.\n"
"Example:\n"
"A value here of 0.25 means 25% from the tool diameter found above.\n"
"\n"
"Adjust the value starting with lower values\n"
"and increasing it if areas that should be cleared are still \n"
"not cleared.\n"
"Lower values = faster processing, faster execution on PCB.\n"
"Higher values = slow processing and slow execution on CNC\n"
"due of too many paths."
msgstr ""
"How much (fraction) of the tool width to overlap each tool pass.\n"
"Example:\n"
"A value here of 0.25 means 25% from the tool diameter found above.\n"
"\n"
"Adjust the value starting with lower values\n"
"and increasing it if areas that should be cleared are still \n"
"not cleared.\n"
"Lower values = faster processing, faster execution on PCB.\n"
"Higher values = slow processing and slow execution on CNC\n"
"due of too many paths."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:4808
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolNonCopperClear.py:182
msgid "Bounding box margin."
msgstr "Bounding box margin."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:4817
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolNonCopperClear.py:191
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolPaint.py:190
msgid ""
"Algorithm for non-copper clearing:<BR><B>Standard</B>: Fixed step inwards."
"<BR><B>Seed-based</B>: Outwards from seed.<BR><B>Line-based</B>: Parallel "
"lines."
msgstr ""
"Algorithm for non-copper clearing:<BR><B>Standard</B>: Fixed step inwards."
"<BR><B>Seed-based</B>: Outwards from seed.<BR><B>Line-based</B>: Parallel "
"lines."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:4849
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolNonCopperClear.py:223
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolPaint.py:222
msgid "Rest M.:"
msgstr "Rest M.:"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:4851
msgid ""
"If checked, use 'rest machining'.\n"
"Basically it will clear copper outside PCB features,\n"
"using the biggest tool and continue with the next tools,\n"
"from bigger to smaller, to clear areas of copper that\n"
"could not be cleared by previous tool.\n"
"If not checked, use the standard algorithm."
msgstr ""
"If checked, use 'rest machining'.\n"
"Basically it will clear copper outside PCB features,\n"
"using the biggest tool and continue with the next tools,\n"
"from bigger to smaller, to clear areas of copper that\n"
"could not be cleared by previous tool.\n"
"If not checked, use the standard algorithm."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:4870
msgid "Cutout Tool Options"
msgstr "Cutout Tool Options"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:4875
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:472
msgid ""
"Create toolpaths to cut around\n"
"the PCB and separate it from\n"
"the original board."
msgstr ""
"Create toolpaths to cut around\n"
"the PCB and separate it from\n"
"the original board."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:4894
msgid ""
"Distance from objects at which\n"
"to draw the cutout."
msgstr ""
"Distance from objects at which\n"
"to draw the cutout."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:4901
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolCutOut.py:96
msgid "Gap size:"
msgstr "Gap size:"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:4903
msgid ""
"Size of the gaps in the toolpath\n"
"that will remain to hold the\n"
"board in place."
msgstr ""
"Size of the gaps in the toolpath\n"
"that will remain to hold the\n"
"board in place."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:4911
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolCutOut.py:125
msgid "Gaps:"
msgstr "Gaps:"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:4913
msgid ""
"Number of bridge gaps used for the cutout.\n"
"There can be maximum 8 bridges/gaps.\n"
"The choices are:\n"
"- lr    - left + right\n"
"- tb    - top + bottom\n"
"- 4     - left + right +top + bottom\n"
"- 2lr   - 2*left + 2*right\n"
"- 2tb  - 2*top + 2*bottom\n"
"- 8     - 2*left + 2*right +2*top + 2*bottom"
msgstr ""
"Number of bridge gaps used for the cutout.\n"
"There can be maximum 8 bridges/gaps.\n"
"The choices are:\n"
"- lr    - left + right\n"
"- tb    - top + bottom\n"
"- 4     - left + right +top + bottom\n"
"- 2lr   - 2*left + 2*right\n"
"- 2tb  - 2*top + 2*bottom\n"
"- 8     - 2*left + 2*right +2*top + 2*bottom"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:4940
msgid "2Sided Tool Options"
msgstr "2Sided Tool Options"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:4945
msgid ""
"A tool to help in creating a double sided\n"
"PCB using alignment holes."
msgstr ""
"A tool to help in creating a double sided\n"
"PCB using alignment holes."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:4955
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolDblSided.py:227
msgid "Drill diam.:"
msgstr "Drill diam.:"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:4957
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolDblSided.py:218
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolDblSided.py:229
msgid "Diameter of the drill for the alignment holes."
msgstr "Diameter of the drill for the alignment holes."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:4964
msgid "X"
msgstr "X"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:4965
msgid "Y"
msgstr "Y"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:4966
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolDblSided.py:116
msgid "Mirror Axis:"
msgstr "Mirror Axis:"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:4968
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolDblSided.py:118
msgid "Mirror vertically (X) or horizontally (Y)."
msgstr "Mirror vertically (X) or horizontally (Y)."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:4977
msgid "Point"
msgstr "Point"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:4978
msgid "Box"
msgstr "Box"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:4979
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolDblSided.py:129
msgid "Axis Ref:"
msgstr "Axis Ref:"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:4981
msgid ""
"The axis should pass through a <b>point</b> or cut\n"
" a specified <b>box</b> (in a Geometry object) in \n"
"the middle."
msgstr ""
"The axis should pass through a <b>point</b> or cut\n"
" a specified <b>box</b> (in a Geometry object) in \n"
"the middle."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:4997
msgid "Paint Tool Options"
msgstr "Paint Tool Options"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:5004
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:1368
msgid ""
"Creates tool paths to cover the\n"
"whole area of a polygon (remove\n"
"all copper). You will be asked\n"
"to click on the desired polygon."
msgstr ""
"Creates tool paths to cover the\n"
"whole area of a polygon (remove\n"
"all copper). You will be asked\n"
"to click on the desired polygon."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:5028
msgid ""
"How much (fraction) of the tool\n"
"width to overlap each tool pass."
msgstr ""
"How much (fraction) of the tool\n"
"width to overlap each tool pass."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:5082
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolPaint.py:237
msgid "Selection:"
msgstr "Selection:"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:5084
msgid "How to select the polygons to paint."
msgstr "How to select the polygons to paint."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:5088
msgid "Single"
msgstr "Single"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:5102
msgid "Film Tool Options"
msgstr "Film Tool Options"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:5107
msgid ""
"Create a PCB film from a Gerber or Geometry\n"
"FlatCAM object.\n"
"The file is saved in SVG format."
msgstr ""
"Create a PCB film from a Gerber or Geometry\n"
"FlatCAM object.\n"
"The file is saved in SVG format."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:5116
msgid "Pos"
msgstr "Pos"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:5117
msgid "Neg"
msgstr "Neg"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:5118
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolFilm.py:116
msgid "Film Type:"
msgstr "Film Type:"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:5120
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolFilm.py:118
msgid ""
"Generate a Positive black film or a Negative film.\n"
"Positive means that it will print the features\n"
"with black on a white canvas.\n"
"Negative means that it will print the features\n"
"with white on a black canvas.\n"
"The Film format is SVG."
msgstr ""
"Generate a Positive black film or a Negative film.\n"
"Positive means that it will print the features\n"
"with black on a white canvas.\n"
"Negative means that it will print the features\n"
"with white on a black canvas.\n"
"The Film format is SVG."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:5131
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolFilm.py:130
msgid "Border:"
msgstr "Border:"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:5133
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolFilm.py:132
msgid ""
"Specify a border around the object.\n"
"Only for negative film.\n"
"It helps if we use as a Box Object the same \n"
"object as in Film Object. It will create a thick\n"
"black bar around the actual print allowing for a\n"
"better delimitation of the outline features which are of\n"
"white color like the rest and which may confound with the\n"
"surroundings if not for this border."
msgstr ""
"Specify a border around the object.\n"
"Only for negative film.\n"
"It helps if we use as a Box Object the same \n"
"object as in Film Object. It will create a thick\n"
"black bar around the actual print allowing for a\n"
"better delimitation of the outline features which are of\n"
"white color like the rest and which may confound with the\n"
"surroundings if not for this border."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:5146
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolFilm.py:144
msgid "Scale Stroke:"
msgstr "Scale Stroke:"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:5148
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolFilm.py:146
msgid ""
"Scale the line stroke thickness of each feature in the SVG file.\n"
"It means that the line that envelope each SVG feature will be thicker or "
"thinner,\n"
"therefore the fine features may be more affected by this parameter."
msgstr ""
"Scale the line stroke thickness of each feature in the SVG file.\n"
"It means that the line that envelope each SVG feature will be thicker or "
"thinner,\n"
"therefore the fine features may be more affected by this parameter."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:5163
msgid "Panelize Tool Options"
msgstr "Panelize Tool Options"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:5168
msgid ""
"Create an object that contains an array of (x, y) elements,\n"
"each element is a copy of the source object spaced\n"
"at a X distance, Y distance of each other."
msgstr ""
"Create an object that contains an array of (x, y) elements,\n"
"each element is a copy of the source object spaced\n"
"at a X distance, Y distance of each other."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:5179
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolPanelize.py:113
msgid "Spacing cols:"
msgstr "Spacing cols:"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:5181
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolPanelize.py:115
msgid ""
"Spacing between columns of the desired panel.\n"
"In current units."
msgstr ""
"Spacing between columns of the desired panel.\n"
"In current units."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:5189
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolPanelize.py:122
msgid "Spacing rows:"
msgstr "Spacing rows:"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:5191
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolPanelize.py:124
msgid ""
"Spacing between rows of the desired panel.\n"
"In current units."
msgstr ""
"Spacing between rows of the desired panel.\n"
"In current units."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:5199
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolPanelize.py:131
msgid "Columns:"
msgstr "Columns:"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:5201
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolPanelize.py:133
msgid "Number of columns of the desired panel"
msgstr "Number of columns of the desired panel"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:5208
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolPanelize.py:139
msgid "Rows:"
msgstr "Rows:"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:5210
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolPanelize.py:141
msgid "Number of rows of the desired panel"
msgstr "Number of rows of the desired panel"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:5216
msgid "Gerber"
msgstr "Gerber"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:5217
msgid "Geo"
msgstr "Geo"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:5218
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolPanelize.py:148
msgid "Panel Type:"
msgstr "Panel Type:"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:5220
msgid ""
"Choose the type of object for the panel object:\n"
"- Gerber\n"
"- Geometry"
msgstr ""
"Choose the type of object for the panel object:\n"
"- Gerber\n"
"- Geometry"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:5229
msgid "Constrain within:"
msgstr "Constrain within:"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:5231
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolPanelize.py:160
msgid ""
"Area define by DX and DY within to constrain the panel.\n"
"DX and DY values are in current units.\n"
"Regardless of how many columns and rows are desired,\n"
"the final panel will have as many columns and rows as\n"
"they fit completely within selected area."
msgstr ""
"Area define by DX and DY within to constrain the panel.\n"
"DX and DY values are in current units.\n"
"Regardless of how many columns and rows are desired,\n"
"the final panel will have as many columns and rows as\n"
"they fit completely within selected area."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:5240
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolPanelize.py:169
msgid "Width (DX):"
msgstr "Width (DX):"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:5242
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolPanelize.py:171
msgid ""
"The width (DX) within which the panel must fit.\n"
"In current units."
msgstr ""
"The width (DX) within which the panel must fit.\n"
"In current units."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:5249
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolPanelize.py:177
msgid "Height (DY):"
msgstr "Height (DY):"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:5251
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolPanelize.py:179
msgid ""
"The height (DY)within which the panel must fit.\n"
"In current units."
msgstr ""
"The height (DY)within which the panel must fit.\n"
"In current units."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:5265
msgid "Calculators Tool Options"
msgstr "Calculators Tool Options"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:5268
msgid "<b>V-Shape Tool Calculator:</b>"
msgstr "<b>V-Shape Tool Calculator:</b>"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:5270
msgid ""
"Calculate the tool diameter for a given V-shape tool,\n"
"having the tip diameter, tip angle and\n"
"depth-of-cut as parameters."
msgstr ""
"Calculate the tool diameter for a given V-shape tool,\n"
"having the tip diameter, tip angle and\n"
"depth-of-cut as parameters."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:5281
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolCalculators.py:94
msgid "Tip Diameter:"
msgstr "Tip Diameter:"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:5283
msgid ""
"This is the tool tip diameter.\n"
"It is specified by manufacturer."
msgstr ""
"This is the tool tip diameter.\n"
"It is specified by manufacturer."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:5291
msgid "Tip angle:"
msgstr "Tip angle:"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:5293
msgid ""
"This is the angle on the tip of the tool.\n"
"It is specified by manufacturer."
msgstr ""
"This is the angle on the tip of the tool.\n"
"It is specified by manufacturer."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:5303
msgid ""
"This is depth to cut into material.\n"
"In the CNCJob object it is the CutZ parameter."
msgstr ""
"This is depth to cut into material.\n"
"In the CNCJob object it is the CutZ parameter."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:5310
msgid "<b>ElectroPlating Calculator:</b>"
msgstr "<b>ElectroPlating Calculator:</b>"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:5312
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolCalculators.py:152
msgid ""
"This calculator is useful for those who plate the via/pad/drill holes,\n"
"using a method like grahite ink or calcium hypophosphite ink or palladium "
"chloride."
msgstr ""
"This calculator is useful for those who plate the via/pad/drill holes,\n"
"using a method like grahite ink or calcium hypophosphite ink or palladium "
"chloride."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:5322
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolCalculators.py:161
msgid "Board Length:"
msgstr "Board Length:"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:5324
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolCalculators.py:165
msgid "This is the board length. In centimeters."
msgstr "This is the board length. In centimeters."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:5330
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolCalculators.py:167
msgid "Board Width:"
msgstr "Board Width:"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:5332
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolCalculators.py:171
msgid "This is the board width.In centimeters."
msgstr "This is the board width.In centimeters."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:5337
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolCalculators.py:173
msgid "Current Density:"
msgstr "Current Density:"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:5340
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolCalculators.py:177
msgid ""
"Current density to pass through the board. \n"
"In Amps per Square Feet ASF."
msgstr ""
"Current density to pass through the board. \n"
"In Amps per Square Feet ASF."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:5346
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolCalculators.py:181
msgid "Copper Growth:"
msgstr "Copper Growth:"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:5349
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolCalculators.py:185
msgid ""
"How thick the copper growth is intended to be.\n"
"In microns."
msgstr ""
"How thick the copper growth is intended to be.\n"
"In microns."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:5362
msgid "Transform Tool Options"
msgstr "Transform Tool Options"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:5367
msgid ""
"Various transformations that can be applied\n"
"on a FlatCAM object."
msgstr ""
"Various transformations that can be applied\n"
"on a FlatCAM object."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:5377
msgid "Rotate Angle:"
msgstr "Rotate Angle:"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:5379
msgid "Angle for rotation. In degrees."
msgstr "Angle for rotation. In degrees."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:5386
msgid "Skew_X angle:"
msgstr "Skew_X angle:"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:5388
msgid "Angle for Skew/Shear on X axis. In degrees."
msgstr "Angle for Skew/Shear on X axis. In degrees."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:5395
msgid "Skew_Y angle:"
msgstr "Skew_Y angle:"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:5397
msgid "Angle for Skew/Shear on Y axis. In degrees."
msgstr "Angle for Skew/Shear on Y axis. In degrees."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:5404
msgid "Scale_X factor:"
msgstr "Scale_X factor:"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:5406
msgid "Factor for scaling on X axis."
msgstr "Factor for scaling on X axis."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:5413
msgid "Scale_Y factor:"
msgstr "Scale_Y factor:"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:5415
msgid "Factor for scaling on Y axis."
msgstr "Factor for scaling on Y axis."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:5423
msgid ""
"Scale the selected object(s)\n"
"using the Scale_X factor for both axis."
msgstr ""
"Scale the selected object(s)\n"
"using the Scale_X factor for both axis."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:5431
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolTransform.py:210
msgid ""
"Scale the selected object(s)\n"
"using the origin reference when checked,\n"
"and the center of the biggest bounding box\n"
"of the selected objects when unchecked."
msgstr ""
"Scale the selected object(s)\n"
"using the origin reference when checked,\n"
"and the center of the biggest bounding box\n"
"of the selected objects when unchecked."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:5440
msgid "Offset_X val:"
msgstr "Offset_X val:"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:5442
msgid "Distance to offset on X axis. In current units."
msgstr "Distance to offset on X axis. In current units."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:5449
msgid "Offset_Y val:"
msgstr "Offset_Y val:"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:5451
msgid "Distance to offset on Y axis. In current units."
msgstr "Distance to offset on Y axis. In current units."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:5457
msgid "Mirror Reference"
msgstr "Mirror Reference"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:5459
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolTransform.py:314
msgid ""
"Flip the selected object(s)\n"
"around the point in Point Entry Field.\n"
"\n"
"The point coordinates can be captured by\n"
"left click on canvas together with pressing\n"
"SHIFT key. \n"
"Then click Add button to insert coordinates.\n"
"Or enter the coords in format (x, y) in the\n"
"Point Entry field and click Flip on X(Y)"
msgstr ""
"Flip the selected object(s)\n"
"around the point in Point Entry Field.\n"
"\n"
"The point coordinates can be captured by\n"
"left click on canvas together with pressing\n"
"SHIFT key. \n"
"Then click Add button to insert coordinates.\n"
"Or enter the coords in format (x, y) in the\n"
"Point Entry field and click Flip on X(Y)"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:5470
msgid " Mirror Ref. Point:"
msgstr " Mirror Ref. Point:"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:5472
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolTransform.py:327
msgid ""
"Coordinates in format (x, y) used as reference for mirroring.\n"
"The 'x' in (x, y) will be used when using Flip on X and\n"
"the 'y' in (x, y) will be used when using Flip on Y and"
msgstr ""
"Coordinates in format (x, y) used as reference for mirroring.\n"
"The 'x' in (x, y) will be used when using Flip on X and\n"
"the 'y' in (x, y) will be used when using Flip on Y and"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:5489
msgid "SolderPaste Tool Options"
msgstr "SolderPaste Tool Options"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:5494
msgid ""
"A tool to create GCode for dispensing\n"
"solder paste onto a PCB."
msgstr ""
"A tool to create GCode for dispensing\n"
"solder paste onto a PCB."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:5505
msgid "Diameters of nozzle tools, separated by ','"
msgstr "Diameters of nozzle tools, separated by ','"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:5512
msgid "<b>New Nozzle Dia:</b>"
msgstr "<b>New Nozzle Dia:</b>"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:5514
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolSolderPaste.py:103
msgid "Diameter for the new Nozzle tool to add in the Tool Table"
msgstr "Diameter for the new Nozzle tool to add in the Tool Table"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:5522
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolSolderPaste.py:166
msgid "Z Dispense Start:"
msgstr "Z Dispense Start:"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:5524
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolSolderPaste.py:168
msgid "The height (Z) when solder paste dispensing starts."
msgstr "The height (Z) when solder paste dispensing starts."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:5531
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolSolderPaste.py:174
msgid "Z Dispense:"
msgstr "Z Dispense:"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:5533
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolSolderPaste.py:176
msgid "The height (Z) when doing solder paste dispensing."
msgstr "The height (Z) when doing solder paste dispensing."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:5540
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolSolderPaste.py:183
msgid "Z Dispense Stop:"
msgstr "Z Dispense Stop:"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:5542
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolSolderPaste.py:185
msgid "The height (Z) when solder paste dispensing stops."
msgstr "The height (Z) when solder paste dispensing stops."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:5549
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolSolderPaste.py:191
msgid "Z Travel:"
msgstr "Z Travel:"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:5551
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolSolderPaste.py:193
msgid ""
"The height (Z) for travel between pads\n"
"(without dispensing solder paste)."
msgstr ""
"The height (Z) for travel between pads\n"
"(without dispensing solder paste)."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:5559
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolSolderPaste.py:200
msgid "Z Toolchange:"
msgstr "Z Toolchange:"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:5561
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolSolderPaste.py:202
msgid "The height (Z) for tool (nozzle) change."
msgstr "The height (Z) for tool (nozzle) change."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:5568
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolSolderPaste.py:208
msgid "XY Toolchange:"
msgstr "XY Toolchange:"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:5570
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolSolderPaste.py:210
msgid ""
"The X,Y location for tool (nozzle) change.\n"
"The format is (x, y) where x and y are real numbers."
msgstr ""
"The X,Y location for tool (nozzle) change.\n"
"The format is (x, y) where x and y are real numbers."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:5578
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolSolderPaste.py:217
msgid "Feedrate X-Y:"
msgstr "Feedrate X-Y:"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:5580
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolSolderPaste.py:219
msgid "Feedrate (speed) while moving on the X-Y plane."
msgstr "Feedrate (speed) while moving on the X-Y plane."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:5587
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolSolderPaste.py:225
msgid "Feedrate Z:"
msgstr "Feedrate Z:"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:5589
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolSolderPaste.py:227
msgid ""
"Feedrate (speed) while moving vertically\n"
"(on Z plane)."
msgstr ""
"Feedrate (speed) while moving vertically\n"
"(on Z plane)."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:5597
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolSolderPaste.py:234
msgid "Feedrate Z Dispense:"
msgstr "Feedrate Z Dispense:"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:5599
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolSolderPaste.py:236
msgid ""
"Feedrate (speed) while moving up vertically\n"
" to Dispense position (on Z plane)."
msgstr ""
"Feedrate (speed) while moving up vertically\n"
" to Dispense position (on Z plane)."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:5607
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolSolderPaste.py:243
msgid "Spindle Speed FWD:"
msgstr "Spindle Speed FWD:"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:5609
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolSolderPaste.py:245
msgid ""
"The dispenser speed while pushing solder paste\n"
"through the dispenser nozzle."
msgstr ""
"The dispenser speed while pushing solder paste\n"
"through the dispenser nozzle."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:5617
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolSolderPaste.py:252
msgid "Dwell FWD:"
msgstr "Dwell FWD:"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:5619
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolSolderPaste.py:254
msgid "Pause after solder dispensing."
msgstr "Pause after solder dispensing."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:5626
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolSolderPaste.py:260
msgid "Spindle Speed REV:"
msgstr "Spindle Speed REV:"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:5628
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolSolderPaste.py:262
msgid ""
"The dispenser speed while retracting solder paste\n"
"through the dispenser nozzle."
msgstr ""
"The dispenser speed while retracting solder paste\n"
"through the dispenser nozzle."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:5636
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolSolderPaste.py:269
msgid "Dwell REV:"
msgstr "Dwell REV:"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:5638
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolSolderPaste.py:271
msgid ""
"Pause after solder paste dispenser retracted,\n"
"to allow pressure equilibrium."
msgstr ""
"Pause after solder paste dispenser retracted,\n"
"to allow pressure equilibrium."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:5645
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolSolderPaste.py:277
msgid "PostProcessors:"
msgstr "PostProcessors:"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:5647
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolSolderPaste.py:279
msgid "Files that control the GCode generation."
msgstr "Files that control the GCode generation."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:5677
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:5683
msgid "Idle."
msgstr "Idle."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:5707
msgid "Application started ..."
msgstr "Application started ..."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\FlatCAMGUI.py:5708
msgid "Hello!"
msgstr "Hello!"

#: D:\1.DEV\FlatCAM_beta\FlatCAMObj.py:193
msgid "[success]Name changed from %s to %s"
msgstr "[success]Name changed from %s to %s"

#: D:\1.DEV\FlatCAM_beta\FlatCAMObj.py:531
#: D:\1.DEV\FlatCAM_beta\FlatCAMObj.py:1885
#: D:\1.DEV\FlatCAM_beta\FlatCAMObj.py:3148
#: D:\1.DEV\FlatCAM_beta\FlatCAMObj.py:5295
msgid "<span style=\"color:green;\"><b>Basic</b></span>"
msgstr "<span style=\"color:green;\"><b>Basic</b></span>"

#: D:\1.DEV\FlatCAM_beta\FlatCAMObj.py:543
#: D:\1.DEV\FlatCAM_beta\FlatCAMObj.py:1901
#: D:\1.DEV\FlatCAM_beta\FlatCAMObj.py:3170
#: D:\1.DEV\FlatCAM_beta\FlatCAMObj.py:5301
msgid "<span style=\"color:red;\"><b>Advanced</b></span>"
msgstr "<span style=\"color:red;\"><b>Advanced</b></span>"

#: D:\1.DEV\FlatCAM_beta\FlatCAMObj.py:898
#: D:\1.DEV\FlatCAM_beta\FlatCAMObj.py:953
msgid "[success]Isolation geometry created: %s"
msgstr "[success]Isolation geometry created: %s"

#: D:\1.DEV\FlatCAM_beta\FlatCAMObj.py:1028
msgid ""
"[ERROR_NOTCL] The aperture scale factor value is missing or wrong format."
msgstr ""
"[ERROR_NOTCL] The aperture scale factor value is missing or wrong format."

#: D:\1.DEV\FlatCAM_beta\FlatCAMObj.py:1043
#: D:\1.DEV\FlatCAM_beta\FlatCAMObj.py:1078
msgid ""
"[WARNING_NOTCL] No aperture to scale. Select at least one aperture and try "
"again."
msgstr ""
"[WARNING_NOTCL] No aperture to scale. Select at least one aperture and try "
"again."

#: D:\1.DEV\FlatCAM_beta\FlatCAMObj.py:1063
msgid "[ERROR_NOTCL] The aperture buffer value is missing or wrong format."
msgstr "[ERROR_NOTCL] The aperture buffer value is missing or wrong format."

#: D:\1.DEV\FlatCAM_beta\FlatCAMObj.py:1136
msgid "Generating Gerber"
msgstr "Generating Gerber"

#: D:\1.DEV\FlatCAM_beta\FlatCAMObj.py:1143
msgid "[ERROR_NOTCL] Cretion of Gerber failed."
msgstr "[ERROR_NOTCL] Cretion of Gerber failed."

#: D:\1.DEV\FlatCAM_beta\FlatCAMObj.py:1151
msgid "[success] Created: %s"
msgstr "[success] Created: %s"

#: D:\1.DEV\FlatCAM_beta\FlatCAMObj.py:1271
msgid "Plotting Apertures"
msgstr "Plotting Apertures"

#: D:\1.DEV\FlatCAM_beta\FlatCAMObj.py:2181
#: D:\1.DEV\FlatCAM_beta\FlatCAMObj.py:2272
#: D:\1.DEV\FlatCAM_beta\FlatCAMObj.py:2387
msgid ""
"[ERROR_NOTCL]Please select one or more tools from the list and try again."
msgstr ""
"[ERROR_NOTCL]Please select one or more tools from the list and try again."

#: D:\1.DEV\FlatCAM_beta\FlatCAMObj.py:2188
msgid ""
"[ERROR_NOTCL] Milling tool for DRILLS is larger than hole size. Cancelled."
msgstr ""
"[ERROR_NOTCL] Milling tool for DRILLS is larger than hole size. Cancelled."

#: D:\1.DEV\FlatCAM_beta\FlatCAMObj.py:2203
#: D:\1.DEV\FlatCAM_beta\FlatCAMObj.py:2297
#: D:\1.DEV\FlatCAM_beta\FlatCAMObj.py:2408
msgid "Drills_Nr"
msgstr "Drills_Nr"

#: D:\1.DEV\FlatCAM_beta\FlatCAMObj.py:2203
#: D:\1.DEV\FlatCAM_beta\FlatCAMObj.py:2297
#: D:\1.DEV\FlatCAM_beta\FlatCAMObj.py:2408
msgid "Slots_Nr"
msgstr "Slots_Nr"

#: D:\1.DEV\FlatCAM_beta\FlatCAMObj.py:2203
#: D:\1.DEV\FlatCAM_beta\FlatCAMObj.py:2297
#: D:\1.DEV\FlatCAM_beta\FlatCAMObj.py:2408
msgid "Tool_nr"
msgstr "Tool_nr"

#: D:\1.DEV\FlatCAM_beta\FlatCAMObj.py:2282
msgid ""
"[ERROR_NOTCL] Milling tool for SLOTS is larger than hole size. Cancelled."
msgstr ""
"[ERROR_NOTCL] Milling tool for SLOTS is larger than hole size. Cancelled."

#: D:\1.DEV\FlatCAM_beta\FlatCAMObj.py:2445
#: D:\1.DEV\FlatCAM_beta\FlatCAMObj.py:4139
#: D:\1.DEV\FlatCAM_beta\FlatCAMObj.py:4350
#: D:\1.DEV\FlatCAM_beta\FlatCAMObj.py:4665
msgid ""
"[ERROR_NOTCL]Wrong value format for self.defaults[\"z_pdepth\"] or self."
"options[\"z_pdepth\"]"
msgstr ""
"[ERROR_NOTCL]Wrong value format for self.defaults[\"z_pdepth\"] or self."
"options[\"z_pdepth\"]"

#: D:\1.DEV\FlatCAM_beta\FlatCAMObj.py:2457
#: D:\1.DEV\FlatCAM_beta\FlatCAMObj.py:4151
#: D:\1.DEV\FlatCAM_beta\FlatCAMObj.py:4362
#: D:\1.DEV\FlatCAM_beta\FlatCAMObj.py:4677
msgid ""
"[ERROR_NOTCL]Wrong value format for self.defaults[\"feedrate_probe\"] or "
"self.options[\"feedrate_probe\"]"
msgstr ""
"[ERROR_NOTCL]Wrong value format for self.defaults[\"feedrate_probe\"] or "
"self.options[\"feedrate_probe\"]"

#: D:\1.DEV\FlatCAM_beta\FlatCAMObj.py:2490
#: D:\1.DEV\FlatCAM_beta\FlatCAMObj.py:4553
#: D:\1.DEV\FlatCAM_beta\FlatCAMObj.py:4558
#: D:\1.DEV\FlatCAM_beta\FlatCAMObj.py:4704
msgid "Generating CNC Code"
msgstr "Generating CNC Code"

#: D:\1.DEV\FlatCAM_beta\FlatCAMObj.py:2863
msgid "In"
msgstr "In"

#: D:\1.DEV\FlatCAM_beta\FlatCAMObj.py:2863
msgid "Out"
msgstr "Out"

#: D:\1.DEV\FlatCAM_beta\FlatCAMObj.py:2863
#: D:\1.DEV\FlatCAM_beta\FlatCAMObj.py:3105
#: D:\1.DEV\FlatCAM_beta\FlatCAMObj.py:3390
msgid "Path"
msgstr "Path"

#: D:\1.DEV\FlatCAM_beta\FlatCAMObj.py:2863
#: D:\1.DEV\FlatCAM_beta\FlatCAMObj.py:3186
#: D:\1.DEV\FlatCAM_beta\FlatCAMObj.py:3759
msgid "Custom"
msgstr "Custom"

#: D:\1.DEV\FlatCAM_beta\FlatCAMObj.py:2864
msgid "Finish"
msgstr "Finish"

#: D:\1.DEV\FlatCAM_beta\FlatCAMObj.py:2864
#: D:\1.DEV\FlatCAM_beta\FlatCAMObj.py:3107
#: D:\1.DEV\FlatCAM_beta\FlatCAMObj.py:3392
msgid "Rough"
msgstr "Rough"

#: D:\1.DEV\FlatCAM_beta\FlatCAMObj.py:2864
#: D:\1.DEV\FlatCAM_beta\FlatCAMObj.py:3770
#: D:\1.DEV\FlatCAM_beta\FlatCAMObj.py:3771
#: D:\1.DEV\FlatCAM_beta\FlatCAMObj.py:3780
msgid "Iso"
msgstr "Iso"

#: D:\1.DEV\FlatCAM_beta\FlatCAMObj.py:3361
msgid "[ERROR_NOTCL] Please enter the desired tool diameter in Float format."
msgstr "[ERROR_NOTCL] Please enter the desired tool diameter in Float format."

#: D:\1.DEV\FlatCAM_beta\FlatCAMObj.py:3436
msgid "[success] Tool added in Tool Table."
msgstr "[success] Tool added in Tool Table."

#: D:\1.DEV\FlatCAM_beta\FlatCAMObj.py:3441
msgid "[ERROR_NOTCL]Default Tool added. Wrong value format entered."
msgstr "[ERROR_NOTCL]Default Tool added. Wrong value format entered."

#: D:\1.DEV\FlatCAM_beta\FlatCAMObj.py:3471
#: D:\1.DEV\FlatCAM_beta\FlatCAMObj.py:3481
msgid "[WARNING_NOTCL]Failed. Select a tool to copy."
msgstr "[WARNING_NOTCL]Failed. Select a tool to copy."

#: D:\1.DEV\FlatCAM_beta\FlatCAMObj.py:3510
msgid "[success] Tool was copied in Tool Table."
msgstr "[success] Tool was copied in Tool Table."

#: D:\1.DEV\FlatCAM_beta\FlatCAMObj.py:3543
msgid "[success] Tool was edited in Tool Table."
msgstr "[success] Tool was edited in Tool Table."

#: D:\1.DEV\FlatCAM_beta\FlatCAMObj.py:3574
#: D:\1.DEV\FlatCAM_beta\FlatCAMObj.py:3584
msgid "[WARNING_NOTCL]Failed. Select a tool to delete."
msgstr "[WARNING_NOTCL]Failed. Select a tool to delete."

#: D:\1.DEV\FlatCAM_beta\FlatCAMObj.py:3608
msgid "[success] Tool was deleted in Tool Table."
msgstr "[success] Tool was deleted in Tool Table."

#: D:\1.DEV\FlatCAM_beta\FlatCAMObj.py:4022
msgid ""
"[WARNING_NOTCL]This Geometry can't be processed because it is %s geometry."
msgstr ""
"[WARNING_NOTCL]This Geometry can't be processed because it is %s geometry."

#: D:\1.DEV\FlatCAM_beta\FlatCAMObj.py:4039
msgid "[ERROR_NOTCL]Wrong Tool Dia value format entered, use a number."
msgstr "[ERROR_NOTCL]Wrong Tool Dia value format entered, use a number."

#: D:\1.DEV\FlatCAM_beta\FlatCAMObj.py:4066
msgid "[ERROR_NOTCL] Failed. No tool selected in the tool table ..."
msgstr "[ERROR_NOTCL] Failed. No tool selected in the tool table ..."

#: D:\1.DEV\FlatCAM_beta\FlatCAMObj.py:4105
msgid "FlatCAMObj.FlatCAMGeometry.mtool_gen_cncjob() --> %s"
msgstr "FlatCAMObj.FlatCAMGeometry.mtool_gen_cncjob() --> %s"

#: D:\1.DEV\FlatCAM_beta\FlatCAMObj.py:4260
#: D:\1.DEV\FlatCAM_beta\FlatCAMObj.py:4493
msgid ""
"[WARNING] Tool Offset is selected in Tool Table but no value is provided.\n"
"Add a Tool Offset or change the Offset Type."
msgstr ""
"[WARNING] Tool Offset is selected in Tool Table but no value is provided.\n"
"Add a Tool Offset or change the Offset Type."

#: D:\1.DEV\FlatCAM_beta\FlatCAMObj.py:4374
msgid "[ERROR_NOTCL]Cancelled. Empty file, it has no geometry..."
msgstr "[ERROR_NOTCL]Cancelled. Empty file, it has no geometry..."

#: D:\1.DEV\FlatCAM_beta\FlatCAMObj.py:4784
msgid "[success]Geometry Scale done."
msgstr "[success]Geometry Scale done."

#: D:\1.DEV\FlatCAM_beta\FlatCAMObj.py:4821
msgid "[success]Geometry Offset done."
msgstr "[success]Geometry Offset done."

#: D:\1.DEV\FlatCAM_beta\FlatCAMObj.py:5364
#: D:\1.DEV\FlatCAM_beta\FlatCAMObj.py:5369
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolSolderPaste.py:1357
msgid "Export Machine Code ..."
msgstr "Export Machine Code ..."

#: D:\1.DEV\FlatCAM_beta\FlatCAMObj.py:5374
msgid "[WARNING_NOTCL]Export Machine Code cancelled ..."
msgstr "[WARNING_NOTCL]Export Machine Code cancelled ..."

#: D:\1.DEV\FlatCAM_beta\FlatCAMObj.py:5386
msgid "[success] Machine Code file saved to: %s"
msgstr "[success] Machine Code file saved to: %s"

#: D:\1.DEV\FlatCAM_beta\FlatCAMObj.py:5417
msgid "[ERROR]FlatCAMCNNJob.on_modifygcode_button_click() -->%s"
msgstr "[ERROR]FlatCAMCNNJob.on_modifygcode_button_click() -->%s"

#: D:\1.DEV\FlatCAM_beta\FlatCAMObj.py:5523
msgid ""
"[WARNING_NOTCL]This CNCJob object can't be processed because it is a %s "
"CNCJob object."
msgstr ""
"[WARNING_NOTCL]This CNCJob object can't be processed because it is a %s "
"CNCJob object."

#: D:\1.DEV\FlatCAM_beta\FlatCAMObj.py:5575
msgid "[ERROR_NOTCL] G-code does not have a units code: either G20 or G21"
msgstr "[ERROR_NOTCL] G-code does not have a units code: either G20 or G21"

#: D:\1.DEV\FlatCAM_beta\FlatCAMObj.py:5588
msgid ""
"[ERROR_NOTCL] Cancelled. The Toolchange Custom code is enabled but it's "
"empty."
msgstr ""
"[ERROR_NOTCL] Cancelled. The Toolchange Custom code is enabled but it's "
"empty."

#: D:\1.DEV\FlatCAM_beta\FlatCAMObj.py:5595
msgid "[success] Toolchange G-code was replaced by a custom code."
msgstr "[success] Toolchange G-code was replaced by a custom code."

#: D:\1.DEV\FlatCAM_beta\FlatCAMObj.py:5610
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolSolderPaste.py:1386
msgid "[WARNING_NOTCL] No such file or directory"
msgstr "[WARNING_NOTCL] No such file or directory"

#: D:\1.DEV\FlatCAM_beta\FlatCAMObj.py:5630
#: D:\1.DEV\FlatCAM_beta\FlatCAMObj.py:5642
msgid ""
"[WARNING_NOTCL] The used postprocessor file has to have in it's name: "
"'toolchange_custom'"
msgstr ""
"[WARNING_NOTCL] The used postprocessor file has to have in it's name: "
"'toolchange_custom'"

#: D:\1.DEV\FlatCAM_beta\FlatCAMObj.py:5648
msgid "[ERROR] There is no postprocessor file."
msgstr "[ERROR] There is no postprocessor file."

#: D:\1.DEV\FlatCAM_beta\ObjectCollection.py:402
msgid "Object renamed from %s to %s"
msgstr "Object renamed from %s to %s"

#: D:\1.DEV\FlatCAM_beta\ObjectCollection.py:736
msgid "[ERROR] Cause of error: %s"
msgstr "[ERROR] Cause of error: %s"

msgid "FlatCAM Object"
msgstr "FlatCAM Object"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:56
msgid ""
"BASIC is suitable for a beginner. Many parameters\n"
"are hidden from the user in this mode.\n"
"ADVANCED mode will make available all parameters.\n"
"\n"
"To change the application LEVEL, go to:\n"
"Edit -> Preferences -> General and check:\n"
"'APP. LEVEL' radio button."
msgstr ""
"BASIC is suitable for a beginner. Many parameters\n"
"are hidden from the user in this mode.\n"
"ADVANCED mode will make available all parameters.\n"
"\n"
"To change the application LEVEL, go to:\n"
"Edit -> Preferences -> General and check:\n"
"'APP. LEVEL' radio button."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:78
msgid "<b>Scale:</b>"
msgstr "<b>Scale:</b>"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:80
msgid "Change the size of the object."
msgstr "Change the size of the object."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:88
msgid "Factor:"
msgstr "Factor:"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:90
msgid ""
"Factor by which to multiply\n"
"geometric features of this object."
msgstr ""
"Factor by which to multiply\n"
"geometric features of this object."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:101
msgid "Perform scaling operation."
msgstr "Perform scaling operation."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:107
msgid "<b>Offset:</b>"
msgstr "<b>Offset:</b>"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:109
msgid "Change the position of this object."
msgstr "Change the position of this object."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:116
msgid "Vector:"
msgstr "Vector:"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:118
msgid ""
"Amount by which to move the object\n"
"in the x and y axes in (x, y) format."
msgstr ""
"Amount by which to move the object\n"
"in the x and y axes in (x, y) format."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:128
msgid "Perform the offset operation."
msgstr "Perform the offset operation."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:142
msgid "Gerber Object"
msgstr "Gerber Object"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:155
msgid "Solid   "
msgstr "Solid   "

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:163
msgid "M-Color   "
msgstr "M-Color   "

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:181
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:587
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:906
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:1436
msgid "<b>Name:</b>"
msgstr "<b>Name:</b>"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:191
msgid "<b>Apertures:</b>"
msgstr "<b>Apertures:</b>"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:193
msgid "Apertures Table for the Gerber Object."
msgstr "Apertures Table for the Gerber Object."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:202
msgid ""
"Toggle the display of the Gerber Apertures Table.\n"
"When unchecked, it will delete all mark shapes\n"
"that are drawn on canvas."
msgstr ""
"Toggle the display of the Gerber Apertures Table.\n"
"When unchecked, it will delete all mark shapes\n"
"that are drawn on canvas."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:213
msgid "Mark All"
msgstr "Mark All"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:215
msgid ""
"When checked it will display all the apertures.\n"
"When unchecked, it will delete all mark shapes\n"
"that are drawn on canvas."
msgstr ""
"When checked it will display all the apertures.\n"
"When unchecked, it will delete all mark shapes\n"
"that are drawn on canvas."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:227
msgid "Code"
msgstr "Code"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:227
msgid "Dim"
msgstr "Dim"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:227
msgid "Size"
msgstr "Size"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:227
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:958
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:1516
msgid "Type"
msgstr "Type"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:231
msgid "Index"
msgstr "Index"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:233
msgid "Aperture Code"
msgstr "Aperture Code"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:235
msgid "Type of aperture: circular, rectangle, macros etc"
msgstr "Type of aperture: circular, rectangle, macros etc"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:237
msgid "Aperture Size:"
msgstr "Aperture Size:"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:239
msgid ""
"Aperture Dimensions:\n"
" - (width, height) for R, O type.\n"
" - (dia, nVertices) for P type"
msgstr ""
"Aperture Dimensions:\n"
" - (width, height) for R, O type.\n"
" - (dia, nVertices) for P type"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:243
msgid "Mark the aperture instances on canvas."
msgstr "Mark the aperture instances on canvas."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:251
msgid "Scale Factor:"
msgstr "Scale Factor:"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:266
msgid "Perform scaling operation on the selected apertures."
msgstr "Perform scaling operation on the selected apertures."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:272
msgid "Buffer Factor:"
msgstr "Buffer Factor:"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:285
msgid "Buffer"
msgstr "Buffer"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:287
msgid "Perform buffer operation on the selected apertures."
msgstr "Perform buffer operation on the selected apertures."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:295
msgid "<b>Generate new Gerber Object:</b>"
msgstr "<b>Generate new Gerber Object:</b>"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:297
msgid "Will generate a new Gerber object from the changed apertures."
msgstr "Will generate a new Gerber object from the changed apertures."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:303
msgid "Go"
msgstr "Go"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:305
msgid ""
"Will generate a new Gerber object from the changed apertures.\n"
"This new object can then be isolated etc."
msgstr ""
"Will generate a new Gerber object from the changed apertures.\n"
"This new object can then be isolated etc."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:332
msgid ""
"Diameter of the cutting tool.\n"
"If you want to have an isolation path\n"
"inside the actual shape of the Gerber\n"
"feature, use a negative value for\n"
"this parameter."
msgstr ""
"Diameter of the cutting tool.\n"
"If you want to have an isolation path\n"
"inside the actual shape of the Gerber\n"
"feature, use a negative value for\n"
"this parameter."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:343
msgid "Passes:"
msgstr "Passes:"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:377
msgid "Combine"
msgstr "Combine"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:393
msgid "<b>Generate Isolation Geometry:</b>"
msgstr "<b>Generate Isolation Geometry:</b>"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:395
msgid ""
"Create a Geometry object with toolpaths to cut \n"
"isolation outside, inside or on both sides of the\n"
"object. For a Gerber object outside means outside\n"
"of the Gerber feature and inside means inside of\n"
"the Gerber feature, if possible at all. This means\n"
"that only if the Gerber feature has openings inside, they\n"
"will be isolated. If what is wanted is to cut isolation\n"
"inside the actual Gerber feature, use a negative tool\n"
"diameter above."
msgstr ""
"Create a Geometry object with toolpaths to cut \n"
"isolation outside, inside or on both sides of the\n"
"object. For a Gerber object outside means outside\n"
"of the Gerber feature and inside means inside of\n"
"the Gerber feature, if possible at all. This means\n"
"that only if the Gerber feature has openings inside, they\n"
"will be isolated. If what is wanted is to cut isolation\n"
"inside the actual Gerber feature, use a negative tool\n"
"diameter above."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:414
msgid "FULL Geo"
msgstr "FULL Geo"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:416
msgid ""
"Create the Geometry Object\n"
"for isolation routing. It contains both\n"
"the interiors and exteriors geometry."
msgstr ""
"Create the Geometry Object\n"
"for isolation routing. It contains both\n"
"the interiors and exteriors geometry."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:425
msgid "Ext Geo"
msgstr "Ext Geo"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:427
msgid ""
"Create the Geometry Object\n"
"for isolation routing containing\n"
"only the exteriors geometry."
msgstr ""
"Create the Geometry Object\n"
"for isolation routing containing\n"
"only the exteriors geometry."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:434
msgid "Int Geo"
msgstr "Int Geo"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:436
msgid ""
"Create the Geometry Object\n"
"for isolation routing containing\n"
"only the interiors geometry."
msgstr ""
"Create the Geometry Object\n"
"for isolation routing containing\n"
"only the interiors geometry."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:454
msgid "<b>Clear N-copper:</b>"
msgstr "<b>Clear N-copper:</b>"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:464
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolNonCopperClear.py:239
msgid ""
"Create the Geometry Object\n"
"for non-copper routing."
msgstr ""
"Create the Geometry Object\n"
"for non-copper routing."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:470
msgid "<b>Board cutout:</b>"
msgstr "<b>Board cutout:</b>"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:478
msgid "Cutout Tool"
msgstr "Cutout Tool"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:480
msgid ""
"Generate the geometry for\n"
"the board cutout."
msgstr ""
"Generate the geometry for\n"
"the board cutout."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:486
msgid "<b>Non-copper regions:</b>"
msgstr "<b>Non-copper regions:</b>"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:488
msgid ""
"Create polygons covering the\n"
"areas without copper on the PCB.\n"
"Equivalent to the inverse of this\n"
"object. Can be used to remove all\n"
"copper from a specified region."
msgstr ""
"Create polygons covering the\n"
"areas without copper on the PCB.\n"
"Equivalent to the inverse of this\n"
"object. Can be used to remove all\n"
"copper from a specified region."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:513
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:544
msgid "Rounded Geo"
msgstr "Rounded Geo"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:515
msgid "Resulting geometry will have rounded corners."
msgstr "Resulting geometry will have rounded corners."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:520
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:554
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolCutOut.py:159
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolCutOut.py:179
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolCutOut.py:230
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolSolderPaste.py:127
msgid "Generate Geo"
msgstr "Generate Geo"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:526
msgid ""
"Create a geometry surrounding the Gerber object.\n"
"Square shape."
msgstr ""
"Create a geometry surrounding the Gerber object.\n"
"Square shape."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:556
msgid "Generate the Geometry object."
msgstr "Generate the Geometry object."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:567
msgid "Excellon Object"
msgstr "Excellon Object"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:578
msgid "Solid circles."
msgstr "Solid circles."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:606
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:925
msgid "<b>Tools Table</b>"
msgstr "<b>Tools Table</b>"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:627
msgid "Offset Z"
msgstr "Offset Z"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:631
msgid ""
"This is the Tool Number.\n"
"When ToolChange is checked, on toolchange event this value\n"
"will be showed as a T1, T2 ... Tn in the Machine Code."
msgstr ""
"This is the Tool Number.\n"
"When ToolChange is checked, on toolchange event this value\n"
"will be showed as a T1, T2 ... Tn in the Machine Code."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:635
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:970
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolNonCopperClear.py:96
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolPaint.py:94
msgid ""
"Tool Diameter. It's value (in current FlatCAM units) \n"
"is the cut width into the material."
msgstr ""
"Tool Diameter. It's value (in current FlatCAM units) \n"
"is the cut width into the material."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:638
msgid ""
"The number of Drill holes. Holes that are drilled with\n"
"a drill bit."
msgstr ""
"The number of Drill holes. Holes that are drilled with\n"
"a drill bit."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:641
msgid ""
"The number of Slot holes. Holes that are created by\n"
"milling them with an endmill bit."
msgstr ""
"The number of Slot holes. Holes that are created by\n"
"milling them with an endmill bit."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:648
msgid "Toggle display of the drills for the current tool."
msgstr "Toggle display of the drills for the current tool."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:656
msgid ""
"Create a CNC Job object\n"
"for this drill object."
msgstr ""
"Create a CNC Job object\n"
"for this drill object."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:685
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:1185
msgid "Tool change"
msgstr "Tool change"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:693
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:1178
msgid "Tool change Z:"
msgstr "Tool change Z:"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:695
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:1180
msgid ""
"Z-axis position (height) for\n"
"tool change."
msgstr ""
"Z-axis position (height) for\n"
"tool change."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:706
msgid ""
"Tool height just before starting the work.\n"
"Delete the value if you don't need this feature."
msgstr ""
"Tool height just before starting the work.\n"
"Delete the value if you don't need this feature."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:716
msgid ""
"Z-axis position (height) for\n"
"the last move."
msgstr ""
"Z-axis position (height) for\n"
"the last move."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:724
msgid "Feedrate (Plunge):"
msgstr "Feedrate (Plunge):"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:726
msgid ""
"Tool speed while drilling\n"
"(in units per minute).\n"
"This is for linear move G01."
msgstr ""
"Tool speed while drilling\n"
"(in units per minute).\n"
"This is for linear move G01."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:776
msgid ""
"The json file that dictates\n"
"gcode output."
msgstr ""
"The json file that dictates\n"
"gcode output."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:808
msgid ""
"Select from the Tools Table above\n"
"the tools you want to include."
msgstr ""
"Select from the Tools Table above\n"
"the tools you want to include."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:815
msgid "<b>Type:    </b>"
msgstr "<b>Type:    </b>"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:817
msgid ""
"Choose what to use for GCode generation:\n"
"'Drills', 'Slots' or 'Both'.\n"
"When choosing 'Slots' or 'Both', slots will be\n"
"converted to a series of drills."
msgstr ""
"Choose what to use for GCode generation:\n"
"'Drills', 'Slots' or 'Both'.\n"
"When choosing 'Slots' or 'Both', slots will be\n"
"converted to a series of drills."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:832
msgid "Create GCode"
msgstr "Create GCode"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:834
msgid "Generate the CNC Job."
msgstr "Generate the CNC Job."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:846
msgid ""
"Select from the Tools Table above\n"
" the hole dias that are to be milled."
msgstr ""
"Select from the Tools Table above\n"
" the hole dias that are to be milled."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:853
msgid "Drills Tool dia:"
msgstr "Drills Tool dia:"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:860
msgid "Mill Drills Geo"
msgstr "Mill Drills Geo"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:862
msgid ""
"Create the Geometry Object\n"
"for milling DRILLS toolpaths."
msgstr ""
"Create the Geometry Object\n"
"for milling DRILLS toolpaths."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:869
msgid "Slots Tool dia:"
msgstr "Slots Tool dia:"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:876
msgid "Mill Slots Geo"
msgstr "Mill Slots Geo"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:878
msgid ""
"Create the Geometry Object\n"
"for milling SLOTS toolpaths."
msgstr ""
"Create the Geometry Object\n"
"for milling SLOTS toolpaths."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:896
msgid "Geometry Object"
msgstr "Geometry Object"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:927
msgid ""
"Tools in this Geometry object used for cutting.\n"
"The 'Offset' entry will set an offset for the cut.\n"
"'Offset' can be inside, outside, on path (none) and custom.\n"
"'Type' entry is only informative and it allow to know the \n"
"intent of using the current tool. \n"
"It can be Rough(ing), Finish(ing) or Iso(lation).\n"
"The 'Tool type'(TT) can be circular with 1 to 4 teeths(C1..C4),\n"
"ball(B), or V-Shaped(V). \n"
"When V-shaped is selected the 'Type' entry is automatically \n"
"set to Isolation, the CutZ parameter in the UI form is\n"
"grayed out and Cut Z is automatically calculated from the newly \n"
"showed UI form entries named V-Tip Dia and V-Tip Angle."
msgstr ""
"Tools in this Geometry object used for cutting.\n"
"The 'Offset' entry will set an offset for the cut.\n"
"'Offset' can be inside, outside, on path (none) and custom.\n"
"'Type' entry is only informative and it allow to know the \n"
"intent of using the current tool. \n"
"It can be Rough(ing), Finish(ing) or Iso(lation).\n"
"The 'Tool type'(TT) can be circular with 1 to 4 teeths(C1..C4),\n"
"ball(B), or V-Shaped(V). \n"
"When V-shaped is selected the 'Type' entry is automatically \n"
"set to Isolation, the CutZ parameter in the UI form is\n"
"grayed out and Cut Z is automatically calculated from the newly \n"
"showed UI form entries named V-Tip Dia and V-Tip Angle."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:958
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:1516
msgid "Dia"
msgstr "Dia"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:958
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:1516
msgid "TT"
msgstr "TT"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:964
msgid ""
"This is the Tool Number.\n"
"When ToolChange is checked, on toolchange event this value\n"
"will be showed as a T1, T2 ... Tn"
msgstr ""
"This is the Tool Number.\n"
"When ToolChange is checked, on toolchange event this value\n"
"will be showed as a T1, T2 ... Tn"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:975
msgid ""
"The value for the Offset can be:\n"
"- Path -> There is no offset, the tool cut will be done through the geometry "
"line.\n"
"- In(side) -> The tool cut will follow the geometry inside. It will create a "
"'pocket'.\n"
"- Out(side) -> The tool cut will follow the geometry line on the outside."
msgstr ""
"The value for the Offset can be:\n"
"- Path -> There is no offset, the tool cut will be done through the geometry "
"line.\n"
"- In(side) -> The tool cut will follow the geometry inside. It will create a "
"'pocket'.\n"
"- Out(side) -> The tool cut will follow the geometry line on the outside."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:982
msgid ""
"The (Operation) Type has only informative value. Usually the UI form "
"values \n"
"are choosed based on the operation type and this will serve as a reminder.\n"
"Can be 'Roughing', 'Finishing' or 'Isolation'.\n"
"For Roughing we may choose a lower Feedrate and multiDepth cut.\n"
"For Finishing we may choose a higher Feedrate, without multiDepth.\n"
"For Isolation we need a lower Feedrate as it use a milling bit with a fine "
"tip."
msgstr ""
"The (Operation) Type has only informative value. Usually the UI form "
"values \n"
"are choosed based on the operation type and this will serve as a reminder.\n"
"Can be 'Roughing', 'Finishing' or 'Isolation'.\n"
"For Roughing we may choose a lower Feedrate and multiDepth cut.\n"
"For Finishing we may choose a higher Feedrate, without multiDepth.\n"
"For Isolation we need a lower Feedrate as it use a milling bit with a fine "
"tip."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:991
msgid ""
"The Tool Type (TT) can be:\n"
"- Circular with 1 ... 4 teeth -> it is informative only. Being circular the "
"cut width in material\n"
"is exactly the tool diameter.\n"
"- Ball -> informative only and make reference to the Ball type endmill.\n"
"- V-Shape -> it will disable de Z-Cut parameter in the UI form and enable "
"two additional UI form\n"
"fields: V-Tip Dia and V-Tip Angle. Adjusting those two values will adjust "
"the Z-Cut parameter such\n"
"as the cut width into material will be equal with the value in the Tool "
"Diameter column of this table.\n"
"Choosing the V-Shape Tool Type automatically will select the Operation Type "
"as Isolation."
msgstr ""
"The Tool Type (TT) can be:\n"
"- Circular with 1 ... 4 teeth -> it is informative only. Being circular the "
"cut width in material\n"
"is exactly the tool diameter.\n"
"- Ball -> informative only and make reference to the Ball type endmill.\n"
"- V-Shape -> it will disable de Z-Cut parameter in the UI form and enable "
"two additional UI form\n"
"fields: V-Tip Dia and V-Tip Angle. Adjusting those two values will adjust "
"the Z-Cut parameter such\n"
"as the cut width into material will be equal with the value in the Tool "
"Diameter column of this table.\n"
"Choosing the V-Shape Tool Type automatically will select the Operation Type "
"as Isolation."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:1002
msgid ""
"Plot column. It is visible only for MultiGeo geometries, meaning geometries "
"that holds the geometry\n"
"data into the tools. For those geometries, deleting the tool will delete the "
"geometry data also,\n"
"so be WARNED. From the checkboxes on each row it can be enabled/disabled the "
"plot on canvas\n"
"for the corresponding tool."
msgstr ""
"Plot column. It is visible only for MultiGeo geometries, meaning geometries "
"that holds the geometry\n"
"data into the tools. For those geometries, deleting the tool will delete the "
"geometry data also,\n"
"so be WARNED. From the checkboxes on each row it can be enabled/disabled the "
"plot on canvas\n"
"for the corresponding tool."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:1016
msgid "Tool Offset:"
msgstr "Tool Offset:"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:1018
msgid ""
"The value to offset the cut when \n"
"the Offset type selected is 'Offset'.\n"
"The value can be positive for 'outside'\n"
"cut and negative for 'inside' cut."
msgstr ""
"The value to offset the cut when \n"
"the Offset type selected is 'Offset'.\n"
"The value can be positive for 'outside'\n"
"cut and negative for 'inside' cut."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:1042
msgid "<b>Tool Dia:</b>"
msgstr "<b>Tool Dia:</b>"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:1060
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolNonCopperClear.py:135
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolPaint.py:133
msgid ""
"Add a new tool to the Tool Table\n"
"with the diameter specified above."
msgstr ""
"Add a new tool to the Tool Table\n"
"with the diameter specified above."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:1068
msgid ""
"Copy a selection of tools in the Tool Table\n"
"by first selecting a row in the Tool Table."
msgstr ""
"Copy a selection of tools in the Tool Table\n"
"by first selecting a row in the Tool Table."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:1076
msgid ""
"Delete a selection of tools in the Tool Table\n"
"by first selecting a row in the Tool Table."
msgstr ""
"Delete a selection of tools in the Tool Table\n"
"by first selecting a row in the Tool Table."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:1093
msgid "<b>Tool Data</b>"
msgstr "<b>Tool Data</b>"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:1095
msgid ""
"The data used for creating GCode.\n"
"Each tool store it's own set of such data."
msgstr ""
"The data used for creating GCode.\n"
"Each tool store it's own set of such data."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:1106
msgid "V-Tip Dia:"
msgstr "V-Tip Dia:"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:1108
msgid "The tip diameter for V-Shape Tool"
msgstr "The tip diameter for V-Shape Tool"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:1117
msgid "V-Tip Angle:"
msgstr "V-Tip Angle:"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:1119
msgid ""
"The tip angle for V-Shape Tool.\n"
"In degree."
msgstr ""
"The tip angle for V-Shape Tool.\n"
"In degree."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:1141
msgid "Multi-Depth:"
msgstr "Multi-Depth:"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:1143
msgid ""
"Use multiple passes to limit\n"
"the cut depth in each pass. Will\n"
"cut multiple times until Cut Z is\n"
"reached.\n"
"To the right, input the depth of \n"
"each pass (positive value)."
msgstr ""
"Use multiple passes to limit\n"
"the cut depth in each pass. Will\n"
"cut multiple times until Cut Z is\n"
"reached.\n"
"To the right, input the depth of \n"
"each pass (positive value)."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:1156
msgid "Depth of each pass (positive)."
msgstr "Depth of each pass (positive)."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:1187
msgid ""
"Include tool-change sequence\n"
"in the Machine Code (Pause for tool change)."
msgstr ""
"Include tool-change sequence\n"
"in the Machine Code (Pause for tool change)."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:1213
msgid ""
"This is the height (Z) at which the CNC\n"
"will go as the last move."
msgstr ""
"This is the height (Z) at which the CNC\n"
"will go as the last move."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:1235
msgid "Feed Rate Z (Plunge):"
msgstr "Feed Rate Z (Plunge):"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:1237
msgid ""
"Cutting speed in the Z\n"
"plane in units per minute"
msgstr ""
"Cutting speed in the Z\n"
"plane in units per minute"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:1247
msgid "Feed Rate Rapids:"
msgstr "Feed Rate Rapids:"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:1249
msgid ""
"Cutting speed in the XY\n"
"plane in units per minute\n"
"(in units per minute).\n"
"This is for the rapid move G00.\n"
"It is useful only for Marlin,\n"
"ignore for any other cases."
msgstr ""
"Cutting speed in the XY\n"
"plane in units per minute\n"
"(in units per minute).\n"
"This is for the rapid move G00.\n"
"It is useful only for Marlin,\n"
"ignore for any other cases."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:1263
msgid "Cut over 1st pt"
msgstr "Cut over 1st pt"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:1277
msgid ""
"Speed of the spindle in RPM (optional).\n"
"If LASER postprocessor is used,\n"
"this value is the power of laser."
msgstr ""
"Speed of the spindle in RPM (optional).\n"
"If LASER postprocessor is used,\n"
"this value is the power of laser."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:1307
msgid "PostProcessor:"
msgstr "PostProcessor:"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:1309
msgid ""
"The Postprocessor file that dictates\n"
"the Machine Code (like GCode, RML, HPGL) output."
msgstr ""
"The Postprocessor file that dictates\n"
"the Machine Code (like GCode, RML, HPGL) output."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:1347
msgid ""
"Add at least one tool in the tool-table.\n"
"Click the header to select all, or Ctrl + LMB\n"
"for custom selection of tools."
msgstr ""
"Add at least one tool in the tool-table.\n"
"Click the header to select all, or Ctrl + LMB\n"
"for custom selection of tools."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:1355
msgid "Generate"
msgstr "Generate"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:1357
msgid "Generate the CNC Job object."
msgstr "Generate the CNC Job object."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:1366
msgid "<b>Paint Area:</b>"
msgstr "<b>Paint Area:</b>"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:1380
msgid "Launch Paint Tool in Tools Tab."
msgstr "Launch Paint Tool in Tools Tab."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:1398
msgid "CNC Job Object"
msgstr "CNC Job Object"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:1417
msgid "<b>Plot kind:</b>"
msgstr "<b>Plot kind:</b>"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:1442
msgid "<b>Travelled dist.:</b>"
msgstr "<b>Travelled dist.:</b>"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:1444
#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:1451
msgid ""
"This is the total travelled distance on X-Y plane.\n"
"In current units."
msgstr ""
"This is the total travelled distance on X-Y plane.\n"
"In current units."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:1480
msgid "<b>CNC Tools Table</b>"
msgstr "<b>CNC Tools Table</b>"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:1482
msgid ""
"Tools in this CNCJob object used for cutting.\n"
"The tool diameter is used for plotting on canvas.\n"
"The 'Offset' entry will set an offset for the cut.\n"
"'Offset' can be inside, outside, on path (none) and custom.\n"
"'Type' entry is only informative and it allow to know the \n"
"intent of using the current tool. \n"
"It can be Rough(ing), Finish(ing) or Iso(lation).\n"
"The 'Tool type'(TT) can be circular with 1 to 4 teeths(C1..C4),\n"
"ball(B), or V-Shaped(V)."
msgstr ""
"Tools in this CNCJob object used for cutting.\n"
"The tool diameter is used for plotting on canvas.\n"
"The 'Offset' entry will set an offset for the cut.\n"
"'Offset' can be inside, outside, on path (none) and custom.\n"
"'Type' entry is only informative and it allow to know the \n"
"intent of using the current tool. \n"
"It can be Rough(ing), Finish(ing) or Iso(lation).\n"
"The 'Tool type'(TT) can be circular with 1 to 4 teeths(C1..C4),\n"
"ball(B), or V-Shaped(V)."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:1517
msgid "P"
msgstr "P"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:1523
msgid "Update Plot"
msgstr "Update Plot"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:1525
msgid "Update the plot."
msgstr "Update the plot."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:1532
msgid "<b>Export CNC Code:</b>"
msgstr "<b>Export CNC Code:</b>"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:1540
msgid "Prepend to CNC Code:"
msgstr "Prepend to CNC Code:"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:1542
msgid ""
"Type here any G-Code commands you would\n"
"like to add to the beginning of the generated file."
msgstr ""
"Type here any G-Code commands you would\n"
"like to add to the beginning of the generated file."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:1553
msgid "Append to CNC Code"
msgstr "Append to CNC Code"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:1576
msgid ""
"Type here any G-Code commands you would\n"
"like to be executed when Toolchange event is encountered.\n"
"This will constitute a Custom Toolchange GCode,\n"
"or a Toolchange Macro.\n"
"The FlatCAM variables are surrounded by '%' symbol.\n"
"\n"
"WARNING: it can be used only with a postprocessor file\n"
"that has 'toolchange_custom' in it's name and this is built\n"
"having as template the 'Toolchange Custom' posprocessor file."
msgstr ""
"Type here any G-Code commands you would\n"
"like to be executed when Toolchange event is encountered.\n"
"This will constitute a Custom Toolchange GCode,\n"
"or a Toolchange Macro.\n"
"The FlatCAM variables are surrounded by '%' symbol.\n"
"\n"
"WARNING: it can be used only with a postprocessor file\n"
"that has 'toolchange_custom' in it's name and this is built\n"
"having as template the 'Toolchange Custom' posprocessor file."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:1655
msgid "View CNC Code"
msgstr "View CNC Code"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:1657
msgid ""
"Opens TAB to view/modify/print G-Code\n"
"file."
msgstr ""
"Opens TAB to view/modify/print G-Code\n"
"file."

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:1664
msgid "Save CNC Code"
msgstr "Save CNC Code"

#: D:\1.DEV\FlatCAM_beta\flatcamGUI\ObjectUI.py:1666
msgid ""
"Opens dialog to save G-Code\n"
"file."
msgstr ""
"Opens dialog to save G-Code\n"
"file."

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolCalculators.py:24
msgid "Calculators"
msgstr "Calculators"

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolCalculators.py:25
msgid "V-Shape Tool Calculator"
msgstr "V-Shape Tool Calculator"

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolCalculators.py:26
msgid "Units Calculator"
msgstr "Units Calculator"

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolCalculators.py:27
msgid "ElectroPlating Calculator"
msgstr "ElectroPlating Calculator"

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolCalculators.py:68
msgid "Here you enter the value to be converted from INCH to MM"
msgstr "Here you enter the value to be converted from INCH to MM"

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolCalculators.py:73
msgid "Here you enter the value to be converted from MM to INCH"
msgstr "Here you enter the value to be converted from MM to INCH"

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolCalculators.py:98
msgid ""
"This is the diameter of the tool tip.\n"
"The manufacturer specifies it."
msgstr ""
"This is the diameter of the tool tip.\n"
"The manufacturer specifies it."

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolCalculators.py:101
msgid "Tip Angle:"
msgstr "Tip Angle:"

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolCalculators.py:105
msgid ""
"This is the angle of the tip of the tool.\n"
"It is specified by manufacturer."
msgstr ""
"This is the angle of the tip of the tool.\n"
"It is specified by manufacturer."

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolCalculators.py:112
msgid ""
"This is the depth to cut into the material.\n"
"In the CNCJob is the CutZ parameter."
msgstr ""
"This is the depth to cut into the material.\n"
"In the CNCJob is the CutZ parameter."

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolCalculators.py:115
msgid "Tool Diameter:"
msgstr "Tool Diameter:"

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolCalculators.py:119
msgid ""
"This is the tool diameter to be entered into\n"
"FlatCAM Gerber section.\n"
"In the CNCJob section it is called >Tool dia<."
msgstr ""
"This is the tool diameter to be entered into\n"
"FlatCAM Gerber section.\n"
"In the CNCJob section it is called >Tool dia<."

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolCalculators.py:131
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolCalculators.py:214
msgid "Calculate"
msgstr "Calculate"

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolCalculators.py:134
msgid ""
"Calculate either the Cut Z or the effective tool diameter,\n"
"  depending on which is desired and which is known. "
msgstr ""
"Calculate either the Cut Z or the effective tool diameter,\n"
"  depending on which is desired and which is known. "

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolCalculators.py:190
msgid "Current Value:"
msgstr "Current Value:"

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolCalculators.py:194
msgid ""
"This is the current intensity value\n"
"to be set on the Power Supply. In Amps."
msgstr ""
"This is the current intensity value\n"
"to be set on the Power Supply. In Amps."

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolCalculators.py:198
msgid "Time:"
msgstr "Time:"

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolCalculators.py:202
msgid ""
"This is the calculated time required for the procedure.\n"
"In minutes."
msgstr ""
"This is the calculated time required for the procedure.\n"
"In minutes."

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolCalculators.py:217
msgid ""
"Calculate the current intensity value and the procedure time,\n"
"  depending on the parameters above"
msgstr ""
"Calculate the current intensity value and the procedure time,\n"
"  depending on the parameters above"

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolCutOut.py:17
msgid "Cutout PCB"
msgstr "Cutout PCB"

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolCutOut.py:53
msgid "Obj Type:"
msgstr "Obj Type:"

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolCutOut.py:55
msgid ""
"Specify the type of object to be cutout.\n"
"It can be of type: Gerber or Geometry.\n"
"What is selected here will dictate the kind\n"
"of objects that will populate the 'Object' combobox."
msgstr ""
"Specify the type of object to be cutout.\n"
"It can be of type: Gerber or Geometry.\n"
"What is selected here will dictate the kind\n"
"of objects that will populate the 'Object' combobox."

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolCutOut.py:69
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolPanelize.py:71
msgid "Object:"
msgstr "Object:"

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolCutOut.py:71
msgid "Object to be cutout.                        "
msgstr "Object to be cutout.                        "

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolCutOut.py:79
msgid ""
"Diameter of the tool used to cutout\n"
"the PCB shape out of the surrounding material."
msgstr ""
"Diameter of the tool used to cutout\n"
"the PCB shape out of the surrounding material."

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolCutOut.py:88
msgid ""
"Margin over bounds. A positive value here\n"
"will make the cutout of the PCB further from\n"
"the actual PCB border"
msgstr ""
"Margin over bounds. A positive value here\n"
"will make the cutout of the PCB further from\n"
"the actual PCB border"

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolCutOut.py:98
msgid ""
"The size of the bridge gaps in the cutout\n"
"used to keep the board connected to\n"
"the surrounding material (the one \n"
"from which the PCB is cutout)."
msgstr ""
"The size of the bridge gaps in the cutout\n"
"used to keep the board connected to\n"
"the surrounding material (the one \n"
"from which the PCB is cutout)."

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolCutOut.py:114
msgid "A. Automatic Bridge Gaps"
msgstr "A. Automatic Bridge Gaps"

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolCutOut.py:116
msgid "This section handle creation of automatic bridge gaps."
msgstr "This section handle creation of automatic bridge gaps."

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolCutOut.py:127
msgid ""
"Number of gaps used for the Automatic cutout.\n"
"There can be maximum 8 bridges/gaps.\n"
"The choices are:\n"
"- lr    - left + right\n"
"- tb    - top + bottom\n"
"- 4     - left + right +top + bottom\n"
"- 2lr   - 2*left + 2*right\n"
"- 2tb  - 2*top + 2*bottom\n"
"- 8     - 2*left + 2*right +2*top + 2*bottom"
msgstr ""
"Number of gaps used for the Automatic cutout.\n"
"There can be maximum 8 bridges/gaps.\n"
"The choices are:\n"
"- lr    - left + right\n"
"- tb    - top + bottom\n"
"- 4     - left + right +top + bottom\n"
"- 2lr   - 2*left + 2*right\n"
"- 2tb  - 2*top + 2*bottom\n"
"- 8     - 2*left + 2*right +2*top + 2*bottom"

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolCutOut.py:150
msgid "FreeForm:"
msgstr "FreeForm:"

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolCutOut.py:152
msgid ""
"The cutout shape can be of ny shape.\n"
"Useful when the PCB has a non-rectangular shape."
msgstr ""
"The cutout shape can be of ny shape.\n"
"Useful when the PCB has a non-rectangular shape."

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolCutOut.py:161
msgid ""
"Cutout the selected object.\n"
"The cutout shape can be of any shape.\n"
"Useful when the PCB has a non-rectangular shape."
msgstr ""
"Cutout the selected object.\n"
"The cutout shape can be of any shape.\n"
"Useful when the PCB has a non-rectangular shape."

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolCutOut.py:170
msgid "Rectangular:"
msgstr "Rectangular:"

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolCutOut.py:172
msgid ""
"The resulting cutout shape is\n"
"always a rectangle shape and it will be\n"
"the bounding box of the Object."
msgstr ""
"The resulting cutout shape is\n"
"always a rectangle shape and it will be\n"
"the bounding box of the Object."

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolCutOut.py:181
msgid ""
"Cutout the selected object.\n"
"The resulting cutout shape is\n"
"always a rectangle shape and it will be\n"
"the bounding box of the Object."
msgstr ""
"Cutout the selected object.\n"
"The resulting cutout shape is\n"
"always a rectangle shape and it will be\n"
"the bounding box of the Object."

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolCutOut.py:189
msgid "B. Manual Bridge Gaps"
msgstr "B. Manual Bridge Gaps"

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolCutOut.py:191
msgid ""
"This section handle creation of manual bridge gaps.\n"
"This is done by mouse clicking on the perimeter of the\n"
"Geometry object that is used as a cutout object. "
msgstr ""
"This section handle creation of manual bridge gaps.\n"
"This is done by mouse clicking on the perimeter of the\n"
"Geometry object that is used as a cutout object. "

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolCutOut.py:207
msgid "Geo Obj:"
msgstr "Geo Obj:"

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolCutOut.py:209
msgid "Geometry object used to create the manual cutout."
msgstr "Geometry object used to create the manual cutout."

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolCutOut.py:220
msgid "Manual Geo:"
msgstr "Manual Geo:"

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolCutOut.py:222
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolCutOut.py:232
msgid ""
"If the object to be cutout is a Gerber\n"
"first create a Geometry that surrounds it,\n"
"to be used as the cutout, if one doesn't exist yet.\n"
"Select the source Gerber file in the top object combobox."
msgstr ""
"If the object to be cutout is a Gerber\n"
"first create a Geometry that surrounds it,\n"
"to be used as the cutout, if one doesn't exist yet.\n"
"Select the source Gerber file in the top object combobox."

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolCutOut.py:242
msgid "Manual Add Bridge Gaps:"
msgstr "Manual Add Bridge Gaps:"

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolCutOut.py:244
msgid ""
"Use the left mouse button (LMB) click\n"
"to create a bridge gap to separate the PCB from\n"
"the surrounding material."
msgstr ""
"Use the left mouse button (LMB) click\n"
"to create a bridge gap to separate the PCB from\n"
"the surrounding material."

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolCutOut.py:251
msgid "Generate Gap"
msgstr "Generate Gap"

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolCutOut.py:253
msgid ""
"Use the left mouse button (LMB) click\n"
"to create a bridge gap to separate the PCB from\n"
"the surrounding material.\n"
"The LMB click has to be done on the perimeter of\n"
"the Geometry object used as a cutout geometry."
msgstr ""
"Use the left mouse button (LMB) click\n"
"to create a bridge gap to separate the PCB from\n"
"the surrounding material.\n"
"The LMB click has to be done on the perimeter of\n"
"the Geometry object used as a cutout geometry."

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolCutOut.py:326
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolCutOut.py:465
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolNonCopperClear.py:656
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolPaint.py:753
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolPanelize.py:290
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolPanelize.py:304
msgid "[ERROR_NOTCL]Could not retrieve object: %s"
msgstr "[ERROR_NOTCL]Could not retrieve object: %s"

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolCutOut.py:330
msgid ""
"[ERROR_NOTCL]There is no object selected for Cutout.\n"
"Select one and try again."
msgstr ""
"[ERROR_NOTCL]There is no object selected for Cutout.\n"
"Select one and try again."

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolCutOut.py:346
msgid ""
"[WARNING_NOTCL]Tool Diameter is zero value. Change it to a positive integer."
msgstr ""
"[WARNING_NOTCL]Tool Diameter is zero value. Change it to a positive integer."

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolCutOut.py:356
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolCutOut.py:493
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolCutOut.py:718
msgid ""
"[WARNING_NOTCL] Margin value is missing or wrong format. Add it and retry."
msgstr ""
"[WARNING_NOTCL] Margin value is missing or wrong format. Add it and retry."

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolCutOut.py:367
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolCutOut.py:504
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolCutOut.py:613
msgid ""
"[WARNING_NOTCL] Gap size value is missing or wrong format. Add it and retry."
msgstr ""
"[WARNING_NOTCL] Gap size value is missing or wrong format. Add it and retry."

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolCutOut.py:374
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolCutOut.py:511
msgid "[WARNING_NOTCL] Number of gaps value is missing. Add it and retry."
msgstr "[WARNING_NOTCL] Number of gaps value is missing. Add it and retry."

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolCutOut.py:378
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolCutOut.py:515
msgid ""
"[WARNING_NOTCL] Gaps value can be only one of: 'lr', 'tb', '2lr', '2tb', 4 "
"or 8. Fill in a correct value and retry. "
msgstr ""
"[WARNING_NOTCL] Gaps value can be only one of: 'lr', 'tb', '2lr', '2tb', 4 "
"or 8. Fill in a correct value and retry. "

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolCutOut.py:383
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolCutOut.py:520
msgid ""
"[ERROR]Cutout operation cannot be done on a multi-geo Geometry.\n"
"Optionally, this Multi-geo Geometry can be converted to Single-geo "
"Geometry,\n"
"and after that perform Cutout."
msgstr ""
"[ERROR]Cutout operation cannot be done on a multi-geo Geometry.\n"
"Optionally, this Multi-geo Geometry can be converted to Single-geo "
"Geometry,\n"
"and after that perform Cutout."

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolCutOut.py:449
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolCutOut.py:583
msgid "[success] Any form CutOut operation finished."
msgstr "[success] Any form CutOut operation finished."

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolCutOut.py:469
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolPaint.py:757
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolPanelize.py:296
msgid "[ERROR_NOTCL]Object not found: %s"
msgstr "[ERROR_NOTCL]Object not found: %s"

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolCutOut.py:483
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolCutOut.py:603
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolCutOut.py:708
msgid ""
"[ERROR_NOTCL]Tool Diameter is zero value. Change it to a positive integer."
msgstr ""
"[ERROR_NOTCL]Tool Diameter is zero value. Change it to a positive integer."

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolCutOut.py:588
msgid ""
"Click on the selected geometry object perimeter to create a bridge gap ..."
msgstr ""
"Click on the selected geometry object perimeter to create a bridge gap ..."

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolCutOut.py:629
msgid "Making manual bridge gap..."
msgstr "Making manual bridge gap..."

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolCutOut.py:652
msgid "[ERROR_NOTCL]Could not retrieve Geoemtry object: %s"
msgstr "[ERROR_NOTCL]Could not retrieve Geoemtry object: %s"

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolCutOut.py:656
msgid "[ERROR_NOTCL]Geometry object for manual cutout not found: %s"
msgstr "[ERROR_NOTCL]Geometry object for manual cutout not found: %s"

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolCutOut.py:666
msgid "[success] Added manual Bridge Gap."
msgstr "[success] Added manual Bridge Gap."

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolCutOut.py:683
msgid "[ERROR_NOTCL]Could not retrieve Gerber object: %s"
msgstr "[ERROR_NOTCL]Could not retrieve Gerber object: %s"

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolCutOut.py:687
msgid ""
"[ERROR_NOTCL]There is no Gerber object selected for Cutout.\n"
"Select one and try again."
msgstr ""
"[ERROR_NOTCL]There is no Gerber object selected for Cutout.\n"
"Select one and try again."

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolCutOut.py:692
msgid ""
"[ERROR_NOTCL]The selected object has to be of Gerber type.\n"
"Select a Gerber file and try again."
msgstr ""
"[ERROR_NOTCL]The selected object has to be of Gerber type.\n"
"Select a Gerber file and try again."

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolDblSided.py:18
msgid "2-Sided PCB"
msgstr "2-Sided PCB"

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolDblSided.py:52
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolDblSided.py:76
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolDblSided.py:100
msgid "Mirror"
msgstr "Mirror"

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolDblSided.py:54
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolDblSided.py:78
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolDblSided.py:102
msgid ""
"Mirrors (flips) the specified object around \n"
"the specified axis. Does not create a new \n"
"object, but modifies it."
msgstr ""
"Mirrors (flips) the specified object around \n"
"the specified axis. Does not create a new \n"
"object, but modifies it."

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolDblSided.py:73
msgid "Excellon Object to be mirrored."
msgstr "Excellon Object to be mirrored."

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolDblSided.py:97
msgid "Geometry Obj to be mirrored."
msgstr "Geometry Obj to be mirrored."

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolDblSided.py:131
msgid ""
"The axis should pass through a <b>point</b> or cut\n"
" a specified <b>box</b> (in a FlatCAM object) through \n"
"the center."
msgstr ""
"The axis should pass through a <b>point</b> or cut\n"
" a specified <b>box</b> (in a FlatCAM object) through \n"
"the center."

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolDblSided.py:144
msgid "Point/Box Reference:"
msgstr "Point/Box Reference:"

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolDblSided.py:146
msgid ""
"If 'Point' is selected above it store the coordinates (x, y) through which\n"
"the mirroring axis passes.\n"
"If 'Box' is selected above, select here a FlatCAM object (Gerber, Exc or "
"Geo).\n"
"Through the center of this object pass the mirroring axis selected above."
msgstr ""
"If 'Point' is selected above it store the coordinates (x, y) through which\n"
"the mirroring axis passes.\n"
"If 'Box' is selected above, select here a FlatCAM object (Gerber, Exc or "
"Geo).\n"
"Through the center of this object pass the mirroring axis selected above."

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolDblSided.py:154
msgid ""
"Add the coordinates in format <b>(x, y)</b> through which the mirroring "
"axis \n"
" selected in 'MIRROR AXIS' pass.\n"
"The (x, y) coordinates are captured by pressing SHIFT key\n"
"and left mouse button click on canvas or you can enter the coords manually."
msgstr ""
"Add the coordinates in format <b>(x, y)</b> through which the mirroring "
"axis \n"
" selected in 'MIRROR AXIS' pass.\n"
"The (x, y) coordinates are captured by pressing SHIFT key\n"
"and left mouse button click on canvas or you can enter the coords manually."

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolDblSided.py:174
msgid "Gerber   Reference Box Object"
msgstr "Gerber   Reference Box Object"

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolDblSided.py:175
msgid "Excellon Reference Box Object"
msgstr "Excellon Reference Box Object"

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolDblSided.py:176
msgid "Geometry Reference Box Object"
msgstr "Geometry Reference Box Object"

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolDblSided.py:185
msgid ">Alignment Drill Coordinates:"
msgstr ">Alignment Drill Coordinates:"

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolDblSided.py:187
msgid ""
"Alignment holes (x1, y1), (x2, y2), ... on one side of the mirror axis. For "
"each set of (x, y) coordinates\n"
"entered here, a pair of drills will be created:\n"
"\n"
"- one drill at the coordinates from the field\n"
"- one drill in mirror position over the axis selected above in the 'Mirror "
"Axis'."
msgstr ""
"Alignment holes (x1, y1), (x2, y2), ... on one side of the mirror axis. For "
"each set of (x, y) coordinates\n"
"entered here, a pair of drills will be created:\n"
"\n"
"- one drill at the coordinates from the field\n"
"- one drill in mirror position over the axis selected above in the 'Mirror "
"Axis'."

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolDblSided.py:202
msgid ""
"Add alignment drill holes coords in the format: (x1, y1), (x2, y2), ... \n"
"on one side of the mirror axis.\n"
"\n"
"The coordinates set can be obtained:\n"
"- press SHIFT key and left mouse clicking on canvas. Then click Add.\n"
"- press SHIFT key and left mouse clicking on canvas. Then CTRL+V in the "
"field.\n"
"- press SHIFT key and left mouse clicking on canvas. Then RMB click in the "
"field and click Paste.\n"
"- by entering the coords manually in the format: (x1, y1), (x2, y2), ..."
msgstr ""
"Add alignment drill holes coords in the format: (x1, y1), (x2, y2), ... \n"
"on one side of the mirror axis.\n"
"\n"
"The coordinates set can be obtained:\n"
"- press SHIFT key and left mouse clicking on canvas. Then click Add.\n"
"- press SHIFT key and left mouse clicking on canvas. Then CTRL+V in the "
"field.\n"
"- press SHIFT key and left mouse clicking on canvas. Then RMB click in the "
"field and click Paste.\n"
"- by entering the coords manually in the format: (x1, y1), (x2, y2), ..."

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolDblSided.py:216
msgid "Alignment Drill Diameter"
msgstr "Alignment Drill Diameter"

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolDblSided.py:236
msgid "Create Excellon Object"
msgstr "Create Excellon Object"

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolDblSided.py:238
msgid ""
"Creates an Excellon Object containing the\n"
"specified alignment holes and their mirror\n"
"images."
msgstr ""
"Creates an Excellon Object containing the\n"
"specified alignment holes and their mirror\n"
"images."

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolDblSided.py:245
msgid "Reset"
msgstr "Reset"

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolDblSided.py:247
msgid "Resets all the fields."
msgstr "Resets all the fields."

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolDblSided.py:289
msgid "2-Sided Tool"
msgstr "2-Sided Tool"

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolDblSided.py:314
msgid ""
"[WARNING_NOTCL] 'Point' reference is selected and 'Point' coordinates are "
"missing. Add them and retry."
msgstr ""
"[WARNING_NOTCL] 'Point' reference is selected and 'Point' coordinates are "
"missing. Add them and retry."

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolDblSided.py:333
msgid ""
"[WARNING_NOTCL] There is no Box reference object loaded. Load one and retry."
msgstr ""
"[WARNING_NOTCL] There is no Box reference object loaded. Load one and retry."

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolDblSided.py:355
msgid ""
"[WARNING_NOTCL]No value or wrong format in Drill Dia entry. Add it and retry."
msgstr ""
"[WARNING_NOTCL]No value or wrong format in Drill Dia entry. Add it and retry."

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolDblSided.py:362
msgid ""
"[WARNING_NOTCL] There are no Alignment Drill Coordinates to use. Add them "
"and retry."
msgstr ""
"[WARNING_NOTCL] There are no Alignment Drill Coordinates to use. Add them "
"and retry."

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolDblSided.py:384
msgid "[success] Excellon object with alignment drills created..."
msgstr "[success] Excellon object with alignment drills created..."

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolDblSided.py:393
msgid "[WARNING_NOTCL] There is no Gerber object loaded ..."
msgstr "[WARNING_NOTCL] There is no Gerber object loaded ..."

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolDblSided.py:397
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolDblSided.py:440
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolDblSided.py:484
msgid ""
"[ERROR_NOTCL] Only Gerber, Excellon and Geometry objects can be mirrored."
msgstr ""
"[ERROR_NOTCL] Only Gerber, Excellon and Geometry objects can be mirrored."

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolDblSided.py:407
msgid ""
"[WARNING_NOTCL] 'Point' coordinates missing. Using Origin (0, 0) as "
"mirroring reference."
msgstr ""
"[WARNING_NOTCL] 'Point' coordinates missing. Using Origin (0, 0) as "
"mirroring reference."

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolDblSided.py:417
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolDblSided.py:461
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolDblSided.py:498
msgid "[WARNING_NOTCL] There is no Box object loaded ..."
msgstr "[WARNING_NOTCL] There is no Box object loaded ..."

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolDblSided.py:427
msgid "[success] Gerber %s was mirrored..."
msgstr "[success] Gerber %s was mirrored..."

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolDblSided.py:436
msgid "[WARNING_NOTCL] There is no Excellon object loaded ..."
msgstr "[WARNING_NOTCL] There is no Excellon object loaded ..."

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolDblSided.py:451
msgid ""
"[WARNING_NOTCL] There are no Point coordinates in the Point field. Add "
"coords and try again ..."
msgstr ""
"[WARNING_NOTCL] There are no Point coordinates in the Point field. Add "
"coords and try again ..."

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolDblSided.py:471
msgid "[success] Excellon %s was mirrored..."
msgstr "[success] Excellon %s was mirrored..."

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolDblSided.py:480
msgid "[WARNING_NOTCL] There is no Geometry object loaded ..."
msgstr "[WARNING_NOTCL] There is no Geometry object loaded ..."

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolDblSided.py:508
msgid "[success] Geometry %s was mirrored..."
msgstr "[success] Geometry %s was mirrored..."

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolFilm.py:25
msgid "Film PCB"
msgstr "Film PCB"

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolFilm.py:56
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolImage.py:53
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolPanelize.py:56
msgid "Object Type:"
msgstr "Object Type:"

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolFilm.py:58
msgid ""
"Specify the type of object for which to create the film.\n"
"The object can be of type: Gerber or Geometry.\n"
"The selection here decide the type of objects that will be\n"
"in the Film Object combobox."
msgstr ""
"Specify the type of object for which to create the film.\n"
"The object can be of type: Gerber or Geometry.\n"
"The selection here decide the type of objects that will be\n"
"in the Film Object combobox."

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolFilm.py:71
msgid "Film Object:"
msgstr "Film Object:"

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolFilm.py:73
msgid "Object for which to create the film."
msgstr "Object for which to create the film."

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolFilm.py:89
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolPanelize.py:89
msgid "Box Type:"
msgstr "Box Type:"

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolFilm.py:91
msgid ""
"Specify the type of object to be used as an container for\n"
"film creation. It can be: Gerber or Geometry type.The selection here decide "
"the type of objects that will be\n"
"in the Box Object combobox."
msgstr ""
"Specify the type of object to be used as an container for\n"
"film creation. It can be: Gerber or Geometry type.The selection here decide "
"the type of objects that will be\n"
"in the Box Object combobox."

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolFilm.py:104
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolPanelize.py:104
msgid "Box Object:"
msgstr "Box Object:"

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolFilm.py:106
msgid ""
"The actual object that is used a container for the\n"
" selected object for which we create the film.\n"
"Usually it is the PCB outline but it can be also the\n"
"same object for which the film is created."
msgstr ""
"The actual object that is used a container for the\n"
" selected object for which we create the film.\n"
"Usually it is the PCB outline but it can be also the\n"
"same object for which the film is created."

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolFilm.py:157
msgid "Save Film"
msgstr "Save Film"

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolFilm.py:159
msgid ""
"Create a Film for the selected object, within\n"
"the specified box. Does not create a new \n"
" FlatCAM object, but directly save it in SVG format\n"
"which can be opened with Inkscape."
msgstr ""
"Create a Film for the selected object, within\n"
"the specified box. Does not create a new \n"
" FlatCAM object, but directly save it in SVG format\n"
"which can be opened with Inkscape."

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolFilm.py:222
msgid ""
"[ERROR_NOTCL] No FlatCAM object selected. Load an object for Film and retry."
msgstr ""
"[ERROR_NOTCL] No FlatCAM object selected. Load an object for Film and retry."

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolFilm.py:228
msgid ""
"[ERROR_NOTCL] No FlatCAM object selected. Load an object for Box and retry."
msgstr ""
"[ERROR_NOTCL] No FlatCAM object selected. Load an object for Box and retry."

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolFilm.py:252
msgid "Generating Film ..."
msgstr "Generating Film ..."

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolFilm.py:257
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolFilm.py:261
msgid "Export SVG positive"
msgstr "Export SVG positive"

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolFilm.py:266
msgid "[WARNING_NOTCL]Export SVG positive cancelled."
msgstr "[WARNING_NOTCL]Export SVG positive cancelled."

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolFilm.py:273
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolFilm.py:277
msgid "Export SVG negative"
msgstr "Export SVG negative"

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolFilm.py:282
msgid "[WARNING_NOTCL]Export SVG negative cancelled."
msgstr "[WARNING_NOTCL]Export SVG negative cancelled."

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolImage.py:25
msgid "Image as Object"
msgstr "Image as Object"

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolImage.py:31
msgid "Image to PCB"
msgstr "Image to PCB"

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolImage.py:55
msgid ""
"Specify the type of object to create from the image.\n"
"It can be of type: Gerber or Geometry."
msgstr ""
"Specify the type of object to create from the image.\n"
"It can be of type: Gerber or Geometry."

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolImage.py:63
msgid "DPI value:"
msgstr "DPI value:"

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolImage.py:65
msgid "Specify a DPI value for the image."
msgstr "Specify a DPI value for the image."

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolImage.py:72
msgid "Level of detail"
msgstr "Level of detail"

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolImage.py:81
msgid "Image type"
msgstr "Image type"

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolImage.py:83
msgid ""
"Choose a method for the image interpretation.\n"
"B/W means a black & white image. Color means a colored image."
msgstr ""
"Choose a method for the image interpretation.\n"
"B/W means a black & white image. Color means a colored image."

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolImage.py:90
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolImage.py:103
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolImage.py:114
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolImage.py:125
msgid "Mask value"
msgstr "Mask value"

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolImage.py:92
msgid ""
"Mask for monochrome image.\n"
"Takes values between [0 ... 255].\n"
"Decides the level of details to include\n"
"in the resulting geometry.\n"
"0 means no detail and 255 means everything \n"
"(which is totally black)."
msgstr ""
"Mask for monochrome image.\n"
"Takes values between [0 ... 255].\n"
"Decides the level of details to include\n"
"in the resulting geometry.\n"
"0 means no detail and 255 means everything \n"
"(which is totally black)."

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolImage.py:105
msgid ""
"Mask for RED color.\n"
"Takes values between [0 ... 255].\n"
"Decides the level of details to include\n"
"in the resulting geometry."
msgstr ""
"Mask for RED color.\n"
"Takes values between [0 ... 255].\n"
"Decides the level of details to include\n"
"in the resulting geometry."

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolImage.py:116
msgid ""
"Mask for GREEN color.\n"
"Takes values between [0 ... 255].\n"
"Decides the level of details to include\n"
"in the resulting geometry."
msgstr ""
"Mask for GREEN color.\n"
"Takes values between [0 ... 255].\n"
"Decides the level of details to include\n"
"in the resulting geometry."

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolImage.py:127
msgid ""
"Mask for BLUE color.\n"
"Takes values between [0 ... 255].\n"
"Decides the level of details to include\n"
"in the resulting geometry."
msgstr ""
"Mask for BLUE color.\n"
"Takes values between [0 ... 255].\n"
"Decides the level of details to include\n"
"in the resulting geometry."

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolImage.py:139
msgid "Import image"
msgstr "Import image"

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolImage.py:141
msgid "Open a image of raster type and then import it in FlatCAM."
msgstr "Open a image of raster type and then import it in FlatCAM."

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolImage.py:167
msgid "Image Tool"
msgstr "Image Tool"

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolImage.py:197
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolImage.py:200
msgid "Import IMAGE"
msgstr "Import IMAGE"

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolMeasurement.py:26
msgid "Measurement"
msgstr "Measurement"

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolMeasurement.py:47
msgid "Start"
msgstr "Start"

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolMeasurement.py:47
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolMeasurement.py:50
msgid "Coords"
msgstr "Coords"

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolMeasurement.py:48
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolMeasurement.py:99
msgid "This is measuring Start point coordinates."
msgstr "This is measuring Start point coordinates."

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolMeasurement.py:50
msgid "Stop"
msgstr "Stop"

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolMeasurement.py:51
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolMeasurement.py:104
msgid "This is the measuring Stop point coordinates."
msgstr "This is the measuring Stop point coordinates."

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolMeasurement.py:54
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolMeasurement.py:109
msgid "This is the distance measured over the X axis."
msgstr "This is the distance measured over the X axis."

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolMeasurement.py:57
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolMeasurement.py:115
msgid "This is the distance measured over the Y axis."
msgstr "This is the distance measured over the Y axis."

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolMeasurement.py:59
msgid "DISTANCE"
msgstr "DISTANCE"

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolMeasurement.py:60
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolMeasurement.py:121
msgid "This is the point to point Euclidian distance."
msgstr "This is the point to point Euclidian distance."

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolMeasurement.py:63
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolMeasurement.py:70
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolMeasurement.py:77
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolMeasurement.py:84
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolMeasurement.py:91
msgid "Those are the units in which the distance is measured."
msgstr "Those are the units in which the distance is measured."

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolMeasurement.py:124
msgid "Measure"
msgstr "Measure"

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolMeasurement.py:183
msgid "Meas. Tool"
msgstr "Meas. Tool"

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolMeasurement.py:276
msgid "MEASURING: Click on the Start point ..."
msgstr "MEASURING: Click on the Start point ..."

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolMeasurement.py:305
msgid "MEASURING: Click on the Destination point ..."
msgstr "MEASURING: Click on the Destination point ..."

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolMeasurement.py:326
msgid "MEASURING: Result D(x) = %.4f | D(y) = %.4f | Distance = %.4f"
msgstr "MEASURING: Result D(x) = %.4f | D(y) = %.4f | Distance = %.4f"

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolMove.py:81
msgid "MOVE: Click on the Start point ..."
msgstr "MOVE: Click on the Start point ..."

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolMove.py:88
msgid "[WARNING_NOTCL] MOVE action cancelled. No object(s) to move."
msgstr "[WARNING_NOTCL] MOVE action cancelled. No object(s) to move."

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolMove.py:110
msgid "MOVE: Click on the Destination point ..."
msgstr "MOVE: Click on the Destination point ..."

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolMove.py:128
msgid "Moving ..."
msgstr "Moving ..."

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolMove.py:135
msgid "[WARNING_NOTCL] No object(s) selected."
msgstr "[WARNING_NOTCL] No object(s) selected."

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolMove.py:158
msgid "[ERROR_NOTCL] ToolMove.on_left_click() --> %s"
msgstr "[ERROR_NOTCL] ToolMove.on_left_click() --> %s"

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolMove.py:164
msgid "[success]%s object was moved ..."
msgstr "[success]%s object was moved ..."

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolMove.py:174
msgid "[ERROR_NOTCL] ToolMove.on_left_click() --> Error when mouse left click."
msgstr ""
"[ERROR_NOTCL] ToolMove.on_left_click() --> Error when mouse left click."

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolMove.py:202
msgid "[WARNING_NOTCL]Move action cancelled."
msgstr "[WARNING_NOTCL]Move action cancelled."

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolMove.py:214
msgid "[WARNING_NOTCL]Object(s) not selected"
msgstr "[WARNING_NOTCL]Object(s) not selected"

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolNonCopperClear.py:25
msgid "Non-Copper Clearing"
msgstr "Non-Copper Clearing"

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolNonCopperClear.py:63
msgid "Gerber object to be cleared of excess copper.                        "
msgstr "Gerber object to be cleared of excess copper.                        "

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolNonCopperClear.py:73
msgid ""
"Tools pool from which the algorithm\n"
"will pick the ones used for copper clearing."
msgstr ""
"Tools pool from which the algorithm\n"
"will pick the ones used for copper clearing."

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolNonCopperClear.py:88
msgid ""
"This is the Tool Number.\n"
"Non copper clearing will start with the tool with the biggest \n"
"diameter, continuing until there are no more tools.\n"
"Only tools that create NCC clearing geometry will still be present\n"
"in the resulting geometry. This is because with some tools\n"
"this function will not be able to create painting geometry."
msgstr ""
"This is the Tool Number.\n"
"Non copper clearing will start with the tool with the biggest \n"
"diameter, continuing until there are no more tools.\n"
"Only tools that create NCC clearing geometry will still be present\n"
"in the resulting geometry. This is because with some tools\n"
"this function will not be able to create painting geometry."

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolNonCopperClear.py:100
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolPaint.py:98
msgid ""
"The Tool Type (TT) can be:<BR>- <B>Circular</B> with 1 ... 4 teeth -> it is "
"informative only. Being circular, <BR>the cut width in material is exactly "
"the tool diameter.<BR>- <B>Ball</B> -> informative only and make reference "
"to the Ball type endmill.<BR>- <B>V-Shape</B> -> it will disable de Z-Cut "
"parameter in the resulting geometry UI form and enable two additional UI "
"form fields in the resulting geometry: V-Tip Dia and V-Tip Angle. Adjusting "
"those two values will adjust the Z-Cut parameter such as the cut width into "
"material will be equal with the value in the Tool Diameter column of this "
"table.<BR>Choosing the <B>V-Shape</B> Tool Type automatically will select "
"the Operation Type in the resulting geometry as Isolation."
msgstr ""
"The Tool Type (TT) can be:<BR>- <B>Circular</B> with 1 ... 4 teeth -> it is "
"informative only. Being circular, <BR>the cut width in material is exactly "
"the tool diameter.<BR>- <B>Ball</B> -> informative only and make reference "
"to the Ball type endmill.<BR>- <B>V-Shape</B> -> it will disable de Z-Cut "
"parameter in the resulting geometry UI form and enable two additional UI "
"form fields in the resulting geometry: V-Tip Dia and V-Tip Angle. Adjusting "
"those two values will adjust the Z-Cut parameter such as the cut width into "
"material will be equal with the value in the Tool Diameter column of this "
"table.<BR>Choosing the <B>V-Shape</B> Tool Type automatically will select "
"the Operation Type in the resulting geometry as Isolation."

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolNonCopperClear.py:119
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolPaint.py:117
msgid "Tool Dia"
msgstr "Tool Dia"

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolNonCopperClear.py:121
msgid "Diameter for the new tool to add in the Tool Table"
msgstr "Diameter for the new tool to add in the Tool Table"

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolNonCopperClear.py:147
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolPaint.py:145
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolSolderPaste.py:123
msgid ""
"Delete a selection of tools in the Tool Table\n"
"by first selecting a row(s) in the Tool Table."
msgstr ""
"Delete a selection of tools in the Tool Table\n"
"by first selecting a row(s) in the Tool Table."

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolNonCopperClear.py:225
msgid ""
"If checked, use 'rest machining'.\n"
"Basically it will clear copper outside PCB features,\n"
"using the biggest tool and continue with the next tools,\n"
"from bigger to smaller, to clear areas of copper that\n"
"could not be cleared by previous tool, until there is\n"
"no more copper to clear or there are no more tools.\n"
"If not checked, use the standard algorithm."
msgstr ""
"If checked, use 'rest machining'.\n"
"Basically it will clear copper outside PCB features,\n"
"using the biggest tool and continue with the next tools,\n"
"from bigger to smaller, to clear areas of copper that\n"
"could not be cleared by previous tool, until there is\n"
"no more copper to clear or there are no more tools.\n"
"If not checked, use the standard algorithm."

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolNonCopperClear.py:237
msgid "Generate Geometry"
msgstr "Generate Geometry"

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolNonCopperClear.py:480
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolPaint.py:540
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolSolderPaste.py:757
msgid "[WARNING_NOTCL] Please enter a tool diameter to add, in Float format."
msgstr "[WARNING_NOTCL] Please enter a tool diameter to add, in Float format."

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolNonCopperClear.py:508
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolPaint.py:564
msgid "[WARNING_NOTCL]Adding tool cancelled. Tool already in Tool Table."
msgstr "[WARNING_NOTCL]Adding tool cancelled. Tool already in Tool Table."

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolNonCopperClear.py:513
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolPaint.py:569
msgid "[success] New tool added to Tool Table."
msgstr "[success] New tool added to Tool Table."

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolNonCopperClear.py:546
msgid "[ERROR_NOTCL] Wrong value format entered, use a number."
msgstr "[ERROR_NOTCL] Wrong value format entered, use a number."

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolNonCopperClear.py:555
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolPaint.py:612
msgid "[success] Tool from Tool Table was edited."
msgstr "[success] Tool from Tool Table was edited."

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolNonCopperClear.py:566
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolPaint.py:623
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolSolderPaste.py:843
msgid ""
"[WARNING_NOTCL] Edit cancelled. New diameter value is already in the Tool "
"Table."
msgstr ""
"[WARNING_NOTCL] Edit cancelled. New diameter value is already in the Tool "
"Table."

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolNonCopperClear.py:605
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolPaint.py:720
msgid "[WARNING_NOTCL]Delete failed. Select a tool to delete."
msgstr "[WARNING_NOTCL]Delete failed. Select a tool to delete."

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolNonCopperClear.py:610
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolPaint.py:725
msgid "[success] Tool(s) deleted from Tool Table."
msgstr "[success] Tool(s) deleted from Tool Table."

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolNonCopperClear.py:663
msgid "[ERROR_NOTCL]No Gerber file available."
msgstr "[ERROR_NOTCL]No Gerber file available."

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolNonCopperClear.py:701
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolNonCopperClear.py:823
msgid "Clearing Non-Copper areas."
msgstr "Clearing Non-Copper areas."

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolNonCopperClear.py:719
msgid "[success] Non-Copper Clearing with ToolDia = %s started."
msgstr "[success] Non-Copper Clearing with ToolDia = %s started."

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolNonCopperClear.py:788
msgid "[ERROR_NOTCL] NCCTool.clear_non_copper() --> %s"
msgstr "[ERROR_NOTCL] NCCTool.clear_non_copper() --> %s"

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolNonCopperClear.py:793
msgid "[success] NCC Tool finished."
msgstr "[success] NCC Tool finished."

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolNonCopperClear.py:795
msgid ""
"[WARNING_NOTCL] NCC Tool finished but some PCB features could not be "
"cleared. Check the result."
msgstr ""
"[WARNING_NOTCL] NCC Tool finished but some PCB features could not be "
"cleared. Check the result."

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolNonCopperClear.py:841
msgid "[success] Non-Copper Rest Clearing with ToolDia = %s started."
msgstr "[success] Non-Copper Rest Clearing with ToolDia = %s started."

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolNonCopperClear.py:939
msgid "[ERROR_NOTCL] NCCTool.clear_non_copper_rest() --> %s"
msgstr "[ERROR_NOTCL] NCCTool.clear_non_copper_rest() --> %s"

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolNonCopperClear.py:947
msgid ""
"[ERROR_NOTCL] NCC Tool finished but could not clear the object with current "
"settings."
msgstr ""
"[ERROR_NOTCL] NCC Tool finished but could not clear the object with current "
"settings."

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolPaint.py:24
msgid "Paint Area"
msgstr "Paint Area"

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolPaint.py:60
msgid "Geometry:"
msgstr "Geometry:"

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolPaint.py:62
msgid "Geometry object to be painted.                        "
msgstr "Geometry object to be painted.                        "

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolPaint.py:71
msgid ""
"Tools pool from which the algorithm\n"
"will pick the ones used for painting."
msgstr ""
"Tools pool from which the algorithm\n"
"will pick the ones used for painting."

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolPaint.py:86
msgid ""
"This is the Tool Number.\n"
"Painting will start with the tool with the biggest diameter,\n"
"continuing until there are no more tools.\n"
"Only tools that create painting geometry will still be present\n"
"in the resulting geometry. This is because with some tools\n"
"this function will not be able to create painting geometry."
msgstr ""
"This is the Tool Number.\n"
"Painting will start with the tool with the biggest diameter,\n"
"continuing until there are no more tools.\n"
"Only tools that create painting geometry will still be present\n"
"in the resulting geometry. This is because with some tools\n"
"this function will not be able to create painting geometry."

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolPaint.py:119
msgid "Diameter for the new tool."
msgstr "Diameter for the new tool."

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolPaint.py:224
msgid ""
"If checked, use 'rest machining'.\n"
"Basically it will clear copper outside PCB features,\n"
"using the biggest tool and continue with the next tools,\n"
"from bigger to smaller, to clear areas of copper that\n"
"could not be cleared by previous tool, until there is\n"
"no more copper to clear or there are no more tools.\n"
"\n"
"If not checked, use the standard algorithm."
msgstr ""
"If checked, use 'rest machining'.\n"
"Basically it will clear copper outside PCB features,\n"
"using the biggest tool and continue with the next tools,\n"
"from bigger to smaller, to clear areas of copper that\n"
"could not be cleared by previous tool, until there is\n"
"no more copper to clear or there are no more tools.\n"
"\n"
"If not checked, use the standard algorithm."

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolPaint.py:239
msgid ""
"How to select the polygons to paint.<BR>Options:<BR>- <B>Single</B>: left "
"mouse click on the polygon to be painted.<BR>- <B>All</B>: paint all "
"polygons."
msgstr ""
"How to select the polygons to paint.<BR>Options:<BR>- <B>Single</B>: left "
"mouse click on the polygon to be painted.<BR>- <B>All</B>: paint all "
"polygons."

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolPaint.py:254
msgid "Create Paint Geometry"
msgstr "Create Paint Geometry"

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolPaint.py:256
msgid ""
"After clicking here, click inside<BR>the polygon you wish to be painted if "
"<B>Single</B> is selected.<BR>If <B>All</B>  is selected then the Paint will "
"start after click.<BR>A new Geometry object with the tool<BR>paths will be "
"created."
msgstr ""
"After clicking here, click inside<BR>the polygon you wish to be painted if "
"<B>Single</B> is selected.<BR>If <B>All</B>  is selected then the Paint will "
"start after click.<BR>A new Geometry object with the tool<BR>paths will be "
"created."

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolPaint.py:729
msgid "geometry_on_paint_button"
msgstr "geometry_on_paint_button"

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolPaint.py:731
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolPaint.py:776
msgid "[WARNING_NOTCL]Click inside the desired polygon."
msgstr "[WARNING_NOTCL]Click inside the desired polygon."

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolPaint.py:763
msgid "[ERROR_NOTCL] Can't do Paint on MultiGeo geometries ..."
msgstr "[ERROR_NOTCL] Can't do Paint on MultiGeo geometries ..."

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolPaint.py:785
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolPaint.py:989
msgid "Painting polygon..."
msgstr "Painting polygon..."

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolPaint.py:837
msgid "[WARNING] No polygon found."
msgstr "[WARNING] No polygon found."

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolPaint.py:840
msgid "Painting polygon."
msgstr "Painting polygon."

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolPaint.py:882
msgid "[ERROR_NOTCL] Geometry could not be painted completely"
msgstr "[ERROR_NOTCL] Geometry could not be painted completely"

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolPaint.py:908
msgid ""
"[ERROR] Could not do Paint. Try a different combination of parameters. Or a "
"different strategy of paint\n"
"%s"
msgstr ""
"[ERROR] Could not do Paint. Try a different combination of parameters. Or a "
"different strategy of paint\n"
"%s"

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolPaint.py:950
msgid "[ERROR_NOTCL] PaintTool.paint_poly() --> %s"
msgstr "[ERROR_NOTCL] PaintTool.paint_poly() --> %s"

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolPaint.py:956
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolPaint.py:1248
msgid "Polygon Paint started ..."
msgstr "Polygon Paint started ..."

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolPaint.py:1104
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolPaint.py:1193
msgid ""
"[ERROR] Could not do Paint All. Try a different combination of parameters. "
"Or a different Method of paint\n"
"%s"
msgstr ""
"[ERROR] Could not do Paint All. Try a different combination of parameters. "
"Or a different Method of paint\n"
"%s"

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolPaint.py:1128
msgid ""
"[ERROR] There is no Painting Geometry in the file.\n"
"Usually it means that the tool diameter is too big for the painted "
"geometry.\n"
"Change the painting parameters and try again."
msgstr ""
"[ERROR] There is no Painting Geometry in the file.\n"
"Usually it means that the tool diameter is too big for the painted "
"geometry.\n"
"Change the painting parameters and try again."

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolPaint.py:1137
msgid "[success] Paint All Done."
msgstr "[success] Paint All Done."

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolPaint.py:1223
msgid ""
"[ERROR_NOTCL] There is no Painting Geometry in the file.\n"
"Usually it means that the tool diameter is too big for the painted "
"geometry.\n"
"Change the painting parameters and try again."
msgstr ""
"[ERROR_NOTCL] There is no Painting Geometry in the file.\n"
"Usually it means that the tool diameter is too big for the painted "
"geometry.\n"
"Change the painting parameters and try again."

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolPaint.py:1232
msgid "[success] Paint All with Rest-Machining done."
msgstr "[success] Paint All with Rest-Machining done."

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolPanelize.py:25
msgid "Panelize PCB"
msgstr "Panelize PCB"

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolPanelize.py:58
msgid ""
"Specify the type of object to be panelized\n"
"It can be of type: Gerber, Excellon or Geometry.\n"
"The selection here decide the type of objects that will be\n"
"in the Object combobox."
msgstr ""
"Specify the type of object to be panelized\n"
"It can be of type: Gerber, Excellon or Geometry.\n"
"The selection here decide the type of objects that will be\n"
"in the Object combobox."

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolPanelize.py:73
msgid ""
"Object to be panelized. This means that it will\n"
"be duplicated in an array of rows and columns."
msgstr ""
"Object to be panelized. This means that it will\n"
"be duplicated in an array of rows and columns."

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolPanelize.py:91
msgid ""
"Specify the type of object to be used as an container for\n"
"panelization. It can be: Gerber or Geometry type.\n"
"The selection here decide the type of objects that will be\n"
"in the Box Object combobox."
msgstr ""
"Specify the type of object to be used as an container for\n"
"panelization. It can be: Gerber or Geometry type.\n"
"The selection here decide the type of objects that will be\n"
"in the Box Object combobox."

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolPanelize.py:106
msgid ""
"The actual object that is used a container for the\n"
" selected object that is to be panelized."
msgstr ""
"The actual object that is used a container for the\n"
" selected object that is to be panelized."

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolPanelize.py:150
msgid ""
"Choose the type of object for the panel object:\n"
"- Geometry\n"
"- Gerber"
msgstr ""
"Choose the type of object for the panel object:\n"
"- Geometry\n"
"- Gerber"

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolPanelize.py:158
msgid "Constrain panel within:"
msgstr "Constrain panel within:"

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolPanelize.py:192
msgid "Panelize Object"
msgstr "Panelize Object"

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolPanelize.py:194
msgid ""
"Panelize the specified object around the specified box.\n"
"In other words it creates multiple copies of the source object,\n"
"arranged in a 2D array of rows and columns."
msgstr ""
"Panelize the specified object around the specified box.\n"
"In other words it creates multiple copies of the source object,\n"
"arranged in a 2D array of rows and columns."

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolPanelize.py:308
msgid "[WARNING]No object Box. Using instead %s"
msgstr "[WARNING]No object Box. Using instead %s"

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolPanelize.py:389
msgid ""
"[ERROR_NOTCL]Columns or Rows are zero value. Change them to a positive "
"integer."
msgstr ""
"[ERROR_NOTCL]Columns or Rows are zero value. Change them to a positive "
"integer."

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolPanelize.py:414
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolPanelize.py:523
msgid "Generating panel ... Please wait."
msgstr "Generating panel ... Please wait."

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolPanelize.py:517
msgid "[success]Panel done..."
msgstr "[success]Panel done..."

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolPanelize.py:520
msgid ""
"[WARNING] Too big for the constrain area. Final panel has %s columns and %s "
"rows"
msgstr ""
"[WARNING] Too big for the constrain area. Final panel has %s columns and %s "
"rows"

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolPanelize.py:528
msgid "[success]Panel created successfully."
msgstr "[success]Panel created successfully."

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolProperties.py:100
msgid "[ERROR_NOTCL] Properties Tool was not displayed. No object selected."
msgstr "[ERROR_NOTCL] Properties Tool was not displayed. No object selected."

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolProperties.py:107
msgid "[success] Object Properties are displayed."
msgstr "[success] Object Properties are displayed."

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolProperties.py:108
msgid "Properties Tool"
msgstr "Properties Tool"

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolShell.py:69
msgid "...proccessing..."
msgstr "...proccessing..."

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolShell.py:71
msgid "...proccessing... [%s]"
msgstr "...proccessing... [%s]"

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolSolderPaste.py:37
msgid "Solder Paste Tool"
msgstr "Solder Paste Tool"

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolSolderPaste.py:65
msgid "Gerber Solder paste object.                        "
msgstr "Gerber Solder paste object.                        "

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolSolderPaste.py:72
msgid ""
"Tools pool from which the algorithm\n"
"will pick the ones used for dispensing solder paste."
msgstr ""
"Tools pool from which the algorithm\n"
"will pick the ones used for dispensing solder paste."

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolSolderPaste.py:87
msgid ""
"This is the Tool Number.\n"
"The solder dispensing will start with the tool with the biggest \n"
"diameter, continuing until there are no more Nozzle tools.\n"
"If there are no longer tools but there are still pads not covered\n"
" with solder paste, the app will issue a warning message box."
msgstr ""
"This is the Tool Number.\n"
"The solder dispensing will start with the tool with the biggest \n"
"diameter, continuing until there are no more Nozzle tools.\n"
"If there are no longer tools but there are still pads not covered\n"
" with solder paste, the app will issue a warning message box."

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolSolderPaste.py:94
msgid ""
"Nozzle tool Diameter. It's value (in current FlatCAM units)\n"
"is the width of the solder paste dispensed."
msgstr ""
"Nozzle tool Diameter. It's value (in current FlatCAM units)\n"
"is the width of the solder paste dispensed."

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolSolderPaste.py:101
msgid "New Nozzle Tool"
msgstr "New Nozzle Tool"

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolSolderPaste.py:117
msgid ""
"Add a new nozzle tool to the Tool Table\n"
"with the diameter specified above."
msgstr ""
"Add a new nozzle tool to the Tool Table\n"
"with the diameter specified above."

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolSolderPaste.py:129
msgid "Generate solder paste dispensing geometry."
msgstr "Generate solder paste dispensing geometry."

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolSolderPaste.py:142
msgid "STEP 1"
msgstr "STEP 1"

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolSolderPaste.py:144
msgid ""
"First step is to select a number of nozzle tools for usage\n"
"and then optionally modify the GCode parameters bellow."
msgstr ""
"First step is to select a number of nozzle tools for usage\n"
"and then optionally modify the GCode parameters bellow."

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolSolderPaste.py:147
msgid ""
"Select tools.\n"
"Modify parameters."
msgstr ""
"Select tools.\n"
"Modify parameters."

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolSolderPaste.py:290
msgid "Generate GCode"
msgstr "Generate GCode"

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolSolderPaste.py:292
msgid ""
"Generate GCode for Solder Paste dispensing\n"
"on PCB pads."
msgstr ""
"Generate GCode for Solder Paste dispensing\n"
"on PCB pads."

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolSolderPaste.py:308
msgid "STEP 2:"
msgstr "STEP 2:"

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolSolderPaste.py:310
msgid ""
"Second step is to create a solder paste dispensing\n"
"geometry out of an Solder Paste Mask Gerber file."
msgstr ""
"Second step is to create a solder paste dispensing\n"
"geometry out of an Solder Paste Mask Gerber file."

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolSolderPaste.py:326
msgid "Geo Result:"
msgstr "Geo Result:"

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolSolderPaste.py:328
msgid ""
"Geometry Solder Paste object.\n"
"The name of the object has to end in:\n"
"'_solderpaste' as a protection."
msgstr ""
"Geometry Solder Paste object.\n"
"The name of the object has to end in:\n"
"'_solderpaste' as a protection."

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolSolderPaste.py:337
msgid "STEP 3:"
msgstr "STEP 3:"

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolSolderPaste.py:339
msgid ""
"Third step is to select a solder paste dispensing geometry,\n"
"and then generate a CNCJob object.\n"
"\n"
"REMEMBER: if you want to create a CNCJob with new parameters,\n"
"first you need to generate a geometry with those new params,\n"
"and only after that you can generate an updated CNCJob."
msgstr ""
"Third step is to select a solder paste dispensing geometry,\n"
"and then generate a CNCJob object.\n"
"\n"
"REMEMBER: if you want to create a CNCJob with new parameters,\n"
"first you need to generate a geometry with those new params,\n"
"and only after that you can generate an updated CNCJob."

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolSolderPaste.py:359
msgid "CNC Result:"
msgstr "CNC Result:"

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolSolderPaste.py:361
msgid ""
"CNCJob Solder paste object.\n"
"In order to enable the GCode save section,\n"
"the name of the object has to end in:\n"
"'_solderpaste' as a protection."
msgstr ""
"CNCJob Solder paste object.\n"
"In order to enable the GCode save section,\n"
"the name of the object has to end in:\n"
"'_solderpaste' as a protection."

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolSolderPaste.py:371
msgid "View GCode"
msgstr "View GCode"

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolSolderPaste.py:373
msgid ""
"View the generated GCode for Solder Paste dispensing\n"
"on PCB pads."
msgstr ""
"View the generated GCode for Solder Paste dispensing\n"
"on PCB pads."

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolSolderPaste.py:377
msgid "Save GCode"
msgstr "Save GCode"

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolSolderPaste.py:379
msgid ""
"Save the generated GCode for Solder Paste dispensing\n"
"on PCB pads, to a file."
msgstr ""
"Save the generated GCode for Solder Paste dispensing\n"
"on PCB pads, to a file."

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolSolderPaste.py:383
msgid "STEP 4:"
msgstr "STEP 4:"

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolSolderPaste.py:385
msgid ""
"Fourth step (and last) is to select a CNCJob made from \n"
"a solder paste dispensing geometry, and then view/save it's GCode."
msgstr ""
"Fourth step (and last) is to select a CNCJob made from \n"
"a solder paste dispensing geometry, and then view/save it's GCode."

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolSolderPaste.py:413
msgid "Delete Object"
msgstr "Delete Object"

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolSolderPaste.py:785
msgid ""
"[WARNING_NOTCL] Adding Nozzle tool cancelled. Tool already in Tool Table."
msgstr ""
"[WARNING_NOTCL] Adding Nozzle tool cancelled. Tool already in Tool Table."

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolSolderPaste.py:790
msgid "[success] New Nozzle tool added to Tool Table."
msgstr "[success] New Nozzle tool added to Tool Table."

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolSolderPaste.py:832
msgid "[success] Nozzle tool from Tool Table was edited."
msgstr "[success] Nozzle tool from Tool Table was edited."

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolSolderPaste.py:888
msgid "[WARNING_NOTCL] Delete failed. Select a Nozzle tool to delete."
msgstr "[WARNING_NOTCL] Delete failed. Select a Nozzle tool to delete."

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolSolderPaste.py:893
msgid "[success] Nozzle tool(s) deleted from Tool Table."
msgstr "[success] Nozzle tool(s) deleted from Tool Table."

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolSolderPaste.py:948
msgid "[WARNING_NOTCL] No SolderPaste mask Gerber object loaded."
msgstr "[WARNING_NOTCL] No SolderPaste mask Gerber object loaded."

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolSolderPaste.py:965
msgid "Creating Solder Paste dispensing geometry."
msgstr "Creating Solder Paste dispensing geometry."

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolSolderPaste.py:977
msgid "[WARNING_NOTCL] No Nozzle tools in the tool table."
msgstr "[WARNING_NOTCL] No Nozzle tools in the tool table."

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolSolderPaste.py:1103
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolSolderPaste.py:1158
msgid "[ERROR_NOTCL] Cancelled. Empty file, it has no geometry..."
msgstr "[ERROR_NOTCL] Cancelled. Empty file, it has no geometry..."

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolSolderPaste.py:1106
msgid "[success] Solder Paste geometry generated successfully..."
msgstr "[success] Solder Paste geometry generated successfully..."

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolSolderPaste.py:1112
msgid ""
"[WARNING_NOTCL] Some or all pads have no solder due of inadequate nozzle "
"diameters..."
msgstr ""
"[WARNING_NOTCL] Some or all pads have no solder due of inadequate nozzle "
"diameters..."

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolSolderPaste.py:1126
msgid "Generating Solder Paste dispensing geometry..."
msgstr "Generating Solder Paste dispensing geometry..."

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolSolderPaste.py:1146
msgid "[WARNING_NOTCL] There is no Geometry object available."
msgstr "[WARNING_NOTCL] There is no Geometry object available."

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolSolderPaste.py:1150
msgid ""
"[WARNING_NOTCL] This Geometry can't be processed. NOT a solder_paste_tool "
"geometry."
msgstr ""
"[WARNING_NOTCL] This Geometry can't be processed. NOT a solder_paste_tool "
"geometry."

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolSolderPaste.py:1255
msgid "[success] ToolSolderPaste CNCjob created: %s"
msgstr "[success] ToolSolderPaste CNCjob created: %s"

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolSolderPaste.py:1287
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolSolderPaste.py:1291
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolSolderPaste.py:1342
msgid ""
"[WARNING_NOTCL] This CNCJob object can't be processed. NOT a "
"solder_paste_tool CNCJob object."
msgstr ""
"[WARNING_NOTCL] This CNCJob object can't be processed. NOT a "
"solder_paste_tool CNCJob object."

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolSolderPaste.py:1314
msgid "[ERROR_NOTCL] No Gcode in the object..."
msgstr "[ERROR_NOTCL] No Gcode in the object..."

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolSolderPaste.py:1323
msgid "[ERROR] ToolSolderPaste.on_view_gcode() -->%s"
msgstr "[ERROR] ToolSolderPaste.on_view_gcode() -->%s"

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolSolderPaste.py:1352
msgid "Export GCode ..."
msgstr "Export GCode ..."

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolSolderPaste.py:1360
msgid "[WARNING_NOTCL] Export Machine Code cancelled ..."
msgstr "[WARNING_NOTCL] Export Machine Code cancelled ..."

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolSolderPaste.py:1390
msgid "[success] Solder paste dispenser GCode file saved to: %s"
msgstr "[success] Solder paste dispenser GCode file saved to: %s"

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolTransform.py:23
msgid "Object Transform"
msgstr "Object Transform"

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolTransform.py:84
msgid ""
"Rotate the selected object(s).\n"
"The point of reference is the middle of\n"
"the bounding box for all selected objects."
msgstr ""
"Rotate the selected object(s).\n"
"The point of reference is the middle of\n"
"the bounding box for all selected objects."

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolTransform.py:120
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolTransform.py:138
msgid ""
"Skew/shear the selected object(s).\n"
"The point of reference is the middle of\n"
"the bounding box for all selected objects."
msgstr ""
"Skew/shear the selected object(s).\n"
"The point of reference is the middle of\n"
"the bounding box for all selected objects."

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolTransform.py:176
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolTransform.py:193
msgid ""
"Scale the selected object(s).\n"
"The point of reference depends on \n"
"the Scale reference checkbox state."
msgstr ""
"Scale the selected object(s).\n"
"The point of reference depends on \n"
"the Scale reference checkbox state."

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolTransform.py:202
msgid ""
"Scale the selected object(s)\n"
"using the Scale Factor X for both axis."
msgstr ""
"Scale the selected object(s)\n"
"using the Scale Factor X for both axis."

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolTransform.py:250
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolTransform.py:267
msgid ""
"Offset the selected object(s).\n"
"The point of reference is the middle of\n"
"the bounding box for all selected objects.\n"
msgstr ""
"Offset the selected object(s).\n"
"The point of reference is the middle of\n"
"the bounding box for all selected objects.\n"

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolTransform.py:297
#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolTransform.py:305
msgid ""
"Flip the selected object(s) over the X axis.\n"
"Does not create a new object.\n"
" "
msgstr ""
"Flip the selected object(s) over the X axis.\n"
"Does not create a new object.\n"
" "

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolTransform.py:634
msgid "[WARNING_NOTCL] No object selected. Please Select an object to rotate!"
msgstr "[WARNING_NOTCL] No object selected. Please Select an object to rotate!"

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolTransform.py:662
msgid "CNCJob objects can't be rotated."
msgstr "CNCJob objects can't be rotated."

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolTransform.py:671
msgid "[success]Rotate done ..."
msgstr "[success]Rotate done ..."

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolTransform.py:686
msgid "[WARNING_NOTCL] No object selected. Please Select an object to flip!"
msgstr "[WARNING_NOTCL] No object selected. Please Select an object to flip!"

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolTransform.py:721
msgid "CNCJob objects can't be mirrored/flipped."
msgstr "CNCJob objects can't be mirrored/flipped."

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolTransform.py:732
msgid "[success]Flip on the Y axis done ..."
msgstr "[success]Flip on the Y axis done ..."

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolTransform.py:742
msgid "[success]Flip on the X axis done ..."
msgstr "[success]Flip on the X axis done ..."

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolTransform.py:756
msgid ""
"[WARNING_NOTCL] No object selected. Please Select an object to shear/skew!"
msgstr ""
"[WARNING_NOTCL] No object selected. Please Select an object to shear/skew!"

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolTransform.py:778
msgid "CNCJob objects can't be skewed."
msgstr "CNCJob objects can't be skewed."

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolTransform.py:790
msgid "[success]Skew on the %s axis done ..."
msgstr "[success]Skew on the %s axis done ..."

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolTransform.py:805
msgid "[WARNING_NOTCL] No object selected. Please Select an object to scale!"
msgstr "[WARNING_NOTCL] No object selected. Please Select an object to scale!"

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolTransform.py:838
msgid "CNCJob objects can't be scaled."
msgstr "CNCJob objects can't be scaled."

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolTransform.py:858
msgid "[WARNING_NOTCL] No object selected. Please Select an object to offset!"
msgstr "[WARNING_NOTCL] No object selected. Please Select an object to offset!"

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolTransform.py:879
msgid "CNCJob objects can't be offseted."
msgstr "CNCJob objects can't be offseted."

#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolTransform.py:891
msgid "[success]Offset on the %s axis done ..."
msgstr "[success]Offset on the %s axis done ..."