FlatCAM/locale/en/LC_MESSAGES/strings.po

# SOME DESCRIPTIVE TITLE.
# Copyright (C) YEAR ORGANIZATION
# FIRST AUTHOR <EMAIL@ADDRESS>, YEAR.
#
msgid ""
msgstr ""
"Project-Id-Version: \n"
"POT-Creation-Date: 2019-06-05 12:38+0300\n"
"PO-Revision-Date: 2019-06-05 13:01+0300\n"
"Last-Translator: \n"
"Language-Team: \n"
"Language: en\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Generated-By: pygettext.py 1.5\n"
"X-Generator: Poedit 2.2.1\n"
"Plural-Forms: nplurals=2; plural=(n != 1);\n"
"X-Poedit-Basepath: ../../..\n"
"X-Poedit-SearchPath-0: .\n"
"X-Poedit-SearchPathExcluded-0: build\n"
"X-Poedit-SearchPathExcluded-1: doc\n"
"X-Poedit-SearchPathExcluded-2: tests\n"

#: FlatCAMApp.py:925
msgid "[ERROR] Could not find the Language files. The App strings are missing."
msgstr ""
"[ERROR] Could not find the Language files. The App strings are missing."

#: FlatCAMApp.py:2013 ObjectCollection.py:80 flatcamTools/ToolImage.py:213
#: flatcamTools/ToolPcbWizard.py:299 flatcamTools/ToolPcbWizard.py:322
msgid "Open cancelled."
msgstr "Open cancelled."

#: FlatCAMApp.py:2027
msgid "Open Config file failed."
msgstr "Open Config file failed."

#: FlatCAMApp.py:2041
msgid "Open Script file failed."
msgstr "Open Script file failed."

#: FlatCAMApp.py:2230
msgid "[WARNING_NOTCL] Select a Geometry, Gerber or Excellon Object to edit."
msgstr "[WARNING_NOTCL] Select a Geometry, Gerber or Excellon Object to edit."

#: FlatCAMApp.py:2240
msgid ""
"[WARNING_NOTCL] Simultanoeus editing of tools geometry in a MultiGeo "
"Geometry is not possible.\n"
"Edit only one geometry at a time."
msgstr ""
"[WARNING_NOTCL] Simultanoeus editing of tools geometry in a MultiGeo "
"Geometry is not possible.\n"
"Edit only one geometry at a time."

#: FlatCAMApp.py:2284
msgid "[WARNING_NOTCL] Editor is activated ..."
msgstr "[WARNING_NOTCL] Editor is activated ..."

#: FlatCAMApp.py:2302
msgid "Do you want to save the edited object?"
msgstr "Do you want to save the edited object?"

#: FlatCAMApp.py:2303 flatcamGUI/FlatCAMGUI.py:1618
msgid "Close Editor"
msgstr "Close Editor"

#: FlatCAMApp.py:2306 FlatCAMApp.py:3398 FlatCAMApp.py:5876
#: FlatCAMTranslation.py:89 flatcamGUI/FlatCAMGUI.py:3730
msgid "Yes"
msgstr "Yes"

#: FlatCAMApp.py:2307 FlatCAMApp.py:3399 FlatCAMApp.py:5877
#: FlatCAMTranslation.py:90 flatcamGUI/FlatCAMGUI.py:3731
msgid "No"
msgstr "No"

#: FlatCAMApp.py:2308 FlatCAMApp.py:3400 FlatCAMApp.py:3732 FlatCAMApp.py:5878
msgid "Cancel"
msgstr "Cancel"

#: FlatCAMApp.py:2335
msgid "[WARNING] Object empty after edit."
msgstr "[WARNING] Object empty after edit."

#: FlatCAMApp.py:2357 FlatCAMApp.py:2376 FlatCAMApp.py:2388
msgid "[WARNING_NOTCL] Select a Gerber, Geometry or Excellon Object to update."
msgstr ""
"[WARNING_NOTCL] Select a Gerber, Geometry or Excellon Object to update."

#: FlatCAMApp.py:2360
#, python-format
msgid "[selected] %s is updated, returning to App..."
msgstr "[selected] %s is updated, returning to App..."

#: FlatCAMApp.py:2725
msgid "[ERROR] Could not load defaults file."
msgstr "[ERROR] Could not load defaults file."

#: FlatCAMApp.py:2737
msgid "[ERROR] Failed to parse defaults file."
msgstr "[ERROR] Failed to parse defaults file."

#: FlatCAMApp.py:2758 FlatCAMApp.py:2762
msgid "Import FlatCAM Preferences"
msgstr "Import FlatCAM Preferences"

#: FlatCAMApp.py:2768
msgid "[WARNING_NOTCL] FlatCAM preferences import cancelled."
msgstr "[WARNING_NOTCL] FlatCAM preferences import cancelled."

#: FlatCAMApp.py:2776 FlatCAMApp.py:2830 FlatCAMApp.py:3277
msgid "[ERROR_NOTCL] Could not load defaults file."
msgstr "[ERROR_NOTCL] Could not load defaults file."

#: FlatCAMApp.py:2784 FlatCAMApp.py:3286
msgid "[ERROR_NOTCL] Failed to parse defaults file."
msgstr "[ERROR_NOTCL] Failed to parse defaults file."

#: FlatCAMApp.py:2787
#, python-format
msgid "[success] Imported Defaults from %s"
msgstr "[success] Imported Defaults from %s"

#: FlatCAMApp.py:2802 FlatCAMApp.py:2807
msgid "Export FlatCAM Preferences"
msgstr "Export FlatCAM Preferences"

#: FlatCAMApp.py:2814
msgid "[WARNING_NOTCL] FlatCAM preferences export cancelled."
msgstr "[WARNING_NOTCL] FlatCAM preferences export cancelled."

#: FlatCAMApp.py:2849 FlatCAMApp.py:3331
msgid "[ERROR_NOTCL] Failed to write defaults to file."
msgstr "[ERROR_NOTCL] Failed to write defaults to file."

#: FlatCAMApp.py:2902
msgid "[ERROR_NOTCL] Failed to open recent files file for writing."
msgstr "[ERROR_NOTCL] Failed to open recent files file for writing."

#: FlatCAMApp.py:2979 camlib.py:4443
msgid "[ERROR_NOTCL] An internal error has ocurred. See shell.\n"
msgstr "[ERROR_NOTCL] An internal error has ocurred. See shell.\n"

#: FlatCAMApp.py:2980
#, python-brace-format
msgid ""
"Object ({kind}) failed because: {error} \n"
"\n"
msgstr ""
"Object ({kind}) failed because: {error} \n"
"\n"

#: FlatCAMApp.py:3000
msgid "Converting units to "
msgstr "Converting units to "

#: FlatCAMApp.py:3079 FlatCAMApp.py:3082 FlatCAMApp.py:3085 FlatCAMApp.py:3088
#, python-brace-format
msgid ""
"[selected] {kind} created/selected: <span style=\"color:{color};\">{name}</"
"span>"
msgstr ""
"[selected] {kind} created/selected: <span style=\"color:{color};\">{name}</"
"span>"

#: FlatCAMApp.py:3182
#, python-brace-format
msgid ""
"<font size=8><B>FlatCAM</B></font><BR>Version {version} {beta} ({date}) - "
"{arch} <BR><BR>2D Computer-Aided Printed Circuit Board<BR>Manufacturing."
"<BR><BR>(c) 2014-2019 <B>Juan Pablo Caram</B><BR><BR><B> Main Contributors:</"
"B><BR>Denis Hayrullin<BR>Kamil Sopko<BR>Marius Stanciu<BR>Matthieu "
"Berthomé<BR>and many others found <a href = \"https://bitbucket.org/jpcgt/"
"flatcam/pull-requests/?state=MERGED\">here.</a><BR><BR>Development is done "
"<a href = \"https://bitbucket.org/jpcgt/flatcam/src/Beta/\">here.</"
"a><BR>DOWNLOAD area <a href = \"https://bitbucket.org/jpcgt/flatcam/"
"downloads/\">here.</a><BR>"
msgstr ""
"<font size=8><B>FlatCAM</B></font><BR>Version {version} {beta} ({date}) - "
"{arch} <BR><BR>2D Computer-Aided Printed Circuit Board<BR>Manufacturing."
"<BR><BR>(c) 2014-2019 <B>Juan Pablo Caram</B><BR><BR><B> Main Contributors:</"
"B><BR>Denis Hayrullin<BR>Kamil Sopko<BR>Marius Stanciu<BR>Matthieu "
"Berthomé<BR>and many others found <a href = \"https://bitbucket.org/jpcgt/"
"flatcam/pull-requests/?state=MERGED\">here.</a><BR><BR>Development is done "
"<a href = \"https://bitbucket.org/jpcgt/flatcam/src/Beta/\">here.</"
"a><BR>DOWNLOAD area <a href = \"https://bitbucket.org/jpcgt/flatcam/"
"downloads/\">here.</a><BR>"

#: FlatCAMApp.py:3335
msgid "[success] Defaults saved."
msgstr "[success] Defaults saved."

#: FlatCAMApp.py:3356
msgid "[ERROR_NOTCL] Could not load factory defaults file."
msgstr "[ERROR_NOTCL] Could not load factory defaults file."

#: FlatCAMApp.py:3365
msgid "[ERROR_NOTCL] Failed to parse factory defaults file."
msgstr "[ERROR_NOTCL] Failed to parse factory defaults file."

#: FlatCAMApp.py:3379
msgid "[ERROR_NOTCL] Failed to write factory defaults to file."
msgstr "[ERROR_NOTCL] Failed to write factory defaults to file."

#: FlatCAMApp.py:3383
msgid "Factory defaults saved."
msgstr "Factory defaults saved."

#: FlatCAMApp.py:3388 flatcamGUI/FlatCAMGUI.py:3106
msgid "[WARNING_NOTCL] Application is saving the project. Please wait ..."
msgstr "[WARNING_NOTCL] Application is saving the project. Please wait ..."

#: FlatCAMApp.py:3393
msgid ""
"There are files/objects modified in FlatCAM. \n"
"Do you want to Save the project?"
msgstr ""
"There are files/objects modified in FlatCAM. \n"
"Do you want to Save the project?"

#: FlatCAMApp.py:3396 FlatCAMApp.py:5874
msgid "Save changes"
msgstr "Save changes"

#: FlatCAMApp.py:3463
msgid ""
"[ERROR] Failed join. The Geometry objects are of different types.\n"
"At least one is MultiGeo type and the other is SingleGeo type. A possibility "
"is to convert from one to another and retry joining \n"
"but in the case of converting from MultiGeo to SingleGeo, informations may "
"be lost and the result may not be what was expected. \n"
"Check the generated GCODE."
msgstr ""
"[ERROR] Failed join. The Geometry objects are of different types.\n"
"At least one is MultiGeo type and the other is SingleGeo type. A possibility "
"is to convert from one to another and retry joining \n"
"but in the case of converting from MultiGeo to SingleGeo, informations may "
"be lost and the result may not be what was expected. \n"
"Check the generated GCODE."

#: FlatCAMApp.py:3504
msgid "[ERROR_NOTCL] Failed. Excellon joining works only on Excellon objects."
msgstr "[ERROR_NOTCL] Failed. Excellon joining works only on Excellon objects."

#: FlatCAMApp.py:3526
msgid "[ERROR_NOTCL] Failed. Gerber joining works only on Gerber objects."
msgstr "[ERROR_NOTCL] Failed. Gerber joining works only on Gerber objects."

#: FlatCAMApp.py:3541 FlatCAMApp.py:3566
msgid "[ERROR_NOTCL] Failed. Select a Geometry Object and try again."
msgstr "[ERROR_NOTCL] Failed. Select a Geometry Object and try again."

#: FlatCAMApp.py:3545 FlatCAMApp.py:3570
#, python-format
msgid "[ERROR_NOTCL] Expected a FlatCAMGeometry, got %s"
msgstr "[ERROR_NOTCL] Expected a FlatCAMGeometry, got %s"

#: FlatCAMApp.py:3558
msgid "[success] A Geometry object was converted to MultiGeo type."
msgstr "[success] A Geometry object was converted to MultiGeo type."

#: FlatCAMApp.py:3584
msgid "[success] A Geometry object was converted to SingleGeo type."
msgstr "[success] A Geometry object was converted to SingleGeo type."

#: FlatCAMApp.py:3731 FlatCAMApp.py:4567 FlatCAMApp.py:6141 FlatCAMApp.py:6152
#: FlatCAMApp.py:6392 FlatCAMApp.py:6402
msgid "Ok"
msgstr "Ok"

#: FlatCAMApp.py:3773
#, python-format
msgid "[success] Converted units to %s"
msgstr "[success] Converted units to %s"

#: FlatCAMApp.py:3784
msgid "[WARNING_NOTCL] Units conversion cancelled."
msgstr "[WARNING_NOTCL] Units conversion cancelled."

#: FlatCAMApp.py:4436
msgid "Open file"
msgstr "Open file"

#: FlatCAMApp.py:4467 FlatCAMApp.py:4472
msgid "Export G-Code ..."
msgstr "Export G-Code ..."

#: FlatCAMApp.py:4475
msgid "[WARNING_NOTCL] Export Code cancelled."
msgstr "[WARNING_NOTCL] Export Code cancelled."

#: FlatCAMApp.py:4485
msgid "[WARNING] No such file or directory"
msgstr "[WARNING] No such file or directory"

#: FlatCAMApp.py:4492
#, python-format
msgid "Saved to: %s"
msgstr "Saved to: %s"

#: FlatCAMApp.py:4555 FlatCAMApp.py:4588 FlatCAMApp.py:4599 FlatCAMApp.py:4610
#: flatcamTools/ToolNonCopperClear.py:489 flatcamTools/ToolSolderPaste.py:765
msgid ""
"[WARNING_NOTCL] Please enter a tool diameter with non-zero value, in Float "
"format."
msgstr ""
"[WARNING_NOTCL] Please enter a tool diameter with non-zero value, in Float "
"format."

#: FlatCAMApp.py:4560 FlatCAMApp.py:4593 FlatCAMApp.py:4604 FlatCAMApp.py:4615
#: flatcamGUI/FlatCAMGUI.py:3001
msgid "[WARNING_NOTCL] Adding Tool cancelled ..."
msgstr "[WARNING_NOTCL] Adding Tool cancelled ..."

#: FlatCAMApp.py:4563
msgid ""
"Adding Tool works only when Advanced is checked.\n"
"Go to Preferences -> General - Show Advanced Options."
msgstr ""
"Adding Tool works only when Advanced is checked.\n"
"Go to Preferences -> General - Show Advanced Options."

#: FlatCAMApp.py:4676
msgid "Object(s) deleted ..."
msgstr "Object(s) deleted ..."

#: FlatCAMApp.py:4680
msgid "Failed. No object(s) selected..."
msgstr "Failed. No object(s) selected..."

#: FlatCAMApp.py:4682
msgid "Save the work in Editor and try again ..."
msgstr "Save the work in Editor and try again ..."

#: FlatCAMApp.py:4695
msgid "Click to set the origin ..."
msgstr "Click to set the origin ..."

#: FlatCAMApp.py:4707
msgid "Jump to ..."
msgstr "Jump to ..."

#: FlatCAMApp.py:4708
msgid "Enter the coordinates in format X,Y:"
msgstr "Enter the coordinates in format X,Y:"

#: FlatCAMApp.py:4715
msgid "Wrong coordinates. Enter coordinates in format: X,Y"
msgstr "Wrong coordinates. Enter coordinates in format: X,Y"

#: FlatCAMApp.py:4733 flatcamEditors/FlatCAMExcEditor.py:2320
#: flatcamEditors/FlatCAMExcEditor.py:2327
#: flatcamEditors/FlatCAMGeoEditor.py:3645
#: flatcamEditors/FlatCAMGeoEditor.py:3659
#: flatcamEditors/FlatCAMGrbEditor.py:1040
#: flatcamEditors/FlatCAMGrbEditor.py:1141
#: flatcamEditors/FlatCAMGrbEditor.py:1409
#: flatcamEditors/FlatCAMGrbEditor.py:1666
#: flatcamEditors/FlatCAMGrbEditor.py:3950
#: flatcamEditors/FlatCAMGrbEditor.py:3964 flatcamGUI/FlatCAMGUI.py:2414
#: flatcamGUI/FlatCAMGUI.py:2426
msgid "[success] Done."
msgstr "[success] Done."

#: FlatCAMApp.py:4865 FlatCAMApp.py:4932
msgid "[WARNING_NOTCL] No object is selected. Select an object and try again."
msgstr "[WARNING_NOTCL] No object is selected. Select an object and try again."

#: FlatCAMApp.py:4973
msgid "[success] Origin set ..."
msgstr "[success] Origin set ..."

#: FlatCAMApp.py:4993
msgid "Preferences"
msgstr "Preferences"

#: FlatCAMApp.py:5013
msgid "[WARNING_NOTCL] No object selected to Flip on Y axis."
msgstr "[WARNING_NOTCL] No object selected to Flip on Y axis."

#: FlatCAMApp.py:5038
msgid "[success] Flip on Y axis done."
msgstr "[success] Flip on Y axis done."

#: FlatCAMApp.py:5040 FlatCAMApp.py:5080
#: flatcamEditors/FlatCAMGeoEditor.py:1355
#: flatcamEditors/FlatCAMGrbEditor.py:5331 flatcamTools/ToolTransform.py:748
#, python-format
msgid "[ERROR_NOTCL] Due of %s, Flip action was not executed."
msgstr "[ERROR_NOTCL] Due of %s, Flip action was not executed."

#: FlatCAMApp.py:5053
msgid "[WARNING_NOTCL] No object selected to Flip on X axis."
msgstr "[WARNING_NOTCL] No object selected to Flip on X axis."

#: FlatCAMApp.py:5078
msgid "[success] Flip on X axis done."
msgstr "[success] Flip on X axis done."

#: FlatCAMApp.py:5093
msgid "[WARNING_NOTCL] No object selected to Rotate."
msgstr "[WARNING_NOTCL] No object selected to Rotate."

#: FlatCAMApp.py:5096 FlatCAMApp.py:5141 FlatCAMApp.py:5172
msgid "Transform"
msgstr "Transform"

#: FlatCAMApp.py:5096 FlatCAMApp.py:5141 FlatCAMApp.py:5172
msgid "Enter the Angle value:"
msgstr "Enter the Angle value:"

#: FlatCAMApp.py:5126
msgid "[success] Rotation done."
msgstr "[success] Rotation done."

#: FlatCAMApp.py:5128 flatcamEditors/FlatCAMGeoEditor.py:1298
#: flatcamEditors/FlatCAMGrbEditor.py:5262 flatcamTools/ToolTransform.py:677
#, python-format
msgid "[ERROR_NOTCL] Due of %s, rotation movement was not executed."
msgstr "[ERROR_NOTCL] Due of %s, rotation movement was not executed."

#: FlatCAMApp.py:5139
msgid "[WARNING_NOTCL] No object selected to Skew/Shear on X axis."
msgstr "[WARNING_NOTCL] No object selected to Skew/Shear on X axis."

#: FlatCAMApp.py:5160
msgid "[success] Skew on X axis done."
msgstr "[success] Skew on X axis done."

#: FlatCAMApp.py:5170
msgid "[WARNING_NOTCL] No object selected to Skew/Shear on Y axis."
msgstr "[WARNING_NOTCL] No object selected to Skew/Shear on Y axis."

#: FlatCAMApp.py:5191
msgid "[success] Skew on Y axis done."
msgstr "[success] Skew on Y axis done."

#: FlatCAMApp.py:5260
msgid "Grid On/Off"
msgstr "Grid On/Off"

#: FlatCAMApp.py:5273 flatcamEditors/FlatCAMGeoEditor.py:937
#: flatcamEditors/FlatCAMGrbEditor.py:2381
#: flatcamEditors/FlatCAMGrbEditor.py:4853 flatcamGUI/ObjectUI.py:991
#: flatcamTools/ToolDblSided.py:160 flatcamTools/ToolDblSided.py:208
#: flatcamTools/ToolNonCopperClear.py:134 flatcamTools/ToolPaint.py:131
#: flatcamTools/ToolSolderPaste.py:115 flatcamTools/ToolSolderPaste.py:479
#: flatcamTools/ToolTransform.py:337
msgid "Add"
msgstr "Add"

#: FlatCAMApp.py:5274 FlatCAMObj.py:3306
#: flatcamEditors/FlatCAMGrbEditor.py:2386 flatcamGUI/FlatCAMGUI.py:527
#: flatcamGUI/FlatCAMGUI.py:724 flatcamGUI/FlatCAMGUI.py:1616
#: flatcamGUI/FlatCAMGUI.py:1953 flatcamGUI/ObjectUI.py:1007
#: flatcamTools/ToolNonCopperClear.py:146 flatcamTools/ToolPaint.py:143
#: flatcamTools/ToolSolderPaste.py:121 flatcamTools/ToolSolderPaste.py:481
msgid "Delete"
msgstr "Delete"

#: FlatCAMApp.py:5287
msgid "New Grid ..."
msgstr "New Grid ..."

#: FlatCAMApp.py:5288
msgid "Enter a Grid Value:"
msgstr "Enter a Grid Value:"

#: FlatCAMApp.py:5296 FlatCAMApp.py:5323
msgid ""
"[WARNING_NOTCL] Please enter a grid value with non-zero value, in Float "
"format."
msgstr ""
"[WARNING_NOTCL] Please enter a grid value with non-zero value, in Float "
"format."

#: FlatCAMApp.py:5302
msgid "[success] New Grid added ..."
msgstr "[success] New Grid added ..."

#: FlatCAMApp.py:5305
msgid "[WARNING_NOTCL] Grid already exists ..."
msgstr "[WARNING_NOTCL] Grid already exists ..."

#: FlatCAMApp.py:5308
msgid "[WARNING_NOTCL] Adding New Grid cancelled ..."
msgstr "[WARNING_NOTCL] Adding New Grid cancelled ..."

#: FlatCAMApp.py:5330
msgid "[ERROR_NOTCL] Grid Value does not exist ..."
msgstr "[ERROR_NOTCL] Grid Value does not exist ..."

#: FlatCAMApp.py:5333
msgid "[success] Grid Value deleted ..."
msgstr "[success] Grid Value deleted ..."

#: FlatCAMApp.py:5336
msgid "[WARNING_NOTCL] Delete Grid value cancelled ..."
msgstr "[WARNING_NOTCL] Delete Grid value cancelled ..."

#: FlatCAMApp.py:5375
msgid "[WARNING_NOTCL] No object selected to copy it's name"
msgstr "[WARNING_NOTCL] No object selected to copy it's name"

#: FlatCAMApp.py:5379
msgid "Name copied on clipboard ..."
msgstr "Name copied on clipboard ..."

#: FlatCAMApp.py:5672 FlatCAMApp.py:5675 FlatCAMApp.py:5678 FlatCAMApp.py:5681
#: FlatCAMApp.py:5696 FlatCAMApp.py:5699 FlatCAMApp.py:5702 FlatCAMApp.py:5705
#: FlatCAMApp.py:5745 FlatCAMApp.py:5748 FlatCAMApp.py:5751 FlatCAMApp.py:5754
#: ObjectCollection.py:717 ObjectCollection.py:720 ObjectCollection.py:723
#: ObjectCollection.py:726
#, python-brace-format
msgid "[selected]<span style=\"color:{color};\">{name}</span> selected"
msgstr "[selected]<span style=\"color:{color};\">{name}</span> selected"

#: FlatCAMApp.py:5871
msgid ""
"There are files/objects opened in FlatCAM.\n"
"Creating a New project will delete them.\n"
"Do you want to Save the project?"
msgstr ""
"There are files/objects opened in FlatCAM.\n"
"Creating a New project will delete them.\n"
"Do you want to Save the project?"

#: FlatCAMApp.py:5892
msgid "[success] New Project created..."
msgstr "[success] New Project created..."

#: FlatCAMApp.py:6000 FlatCAMApp.py:6003 flatcamGUI/FlatCAMGUI.py:608
#: flatcamGUI/FlatCAMGUI.py:1832
msgid "Open Gerber"
msgstr "Open Gerber"

#: FlatCAMApp.py:6008
msgid "[WARNING_NOTCL] Open Gerber cancelled."
msgstr "[WARNING_NOTCL] Open Gerber cancelled."

#: FlatCAMApp.py:6029 FlatCAMApp.py:6032 flatcamGUI/FlatCAMGUI.py:609
#: flatcamGUI/FlatCAMGUI.py:1833
msgid "Open Excellon"
msgstr "Open Excellon"

#: FlatCAMApp.py:6037
msgid "[WARNING_NOTCL] Open Excellon cancelled."
msgstr "[WARNING_NOTCL] Open Excellon cancelled."

#: FlatCAMApp.py:6059 FlatCAMApp.py:6062
msgid "Open G-Code"
msgstr "Open G-Code"

#: FlatCAMApp.py:6067
msgid "[WARNING_NOTCL] Open G-Code cancelled."
msgstr "[WARNING_NOTCL] Open G-Code cancelled."

#: FlatCAMApp.py:6085 FlatCAMApp.py:6088
msgid "Open Project"
msgstr "Open Project"

#: FlatCAMApp.py:6096
msgid "[WARNING_NOTCL] Open Project cancelled."
msgstr "[WARNING_NOTCL] Open Project cancelled."

#: FlatCAMApp.py:6115 FlatCAMApp.py:6118
msgid "Open Configuration File"
msgstr "Open Configuration File"

#: FlatCAMApp.py:6122
msgid "[WARNING_NOTCL Open Config cancelled."
msgstr "[WARNING_NOTCL Open Config cancelled."

#: FlatCAMApp.py:6137 FlatCAMApp.py:6388 FlatCAMApp.py:8538 FlatCAMApp.py:8558
#: FlatCAMApp.py:8579 FlatCAMApp.py:8601
msgid "[WARNING_NOTCL] No object selected."
msgstr "[WARNING_NOTCL] No object selected."

#: FlatCAMApp.py:6138 FlatCAMApp.py:6389
msgid "Please Select a Geometry object to export"
msgstr "Please Select a Geometry object to export"

#: FlatCAMApp.py:6149
msgid "[ERROR_NOTCL] Only Geometry, Gerber and CNCJob objects can be used."
msgstr "[ERROR_NOTCL] Only Geometry, Gerber and CNCJob objects can be used."

#: FlatCAMApp.py:6162 FlatCAMApp.py:6166
msgid "Export SVG"
msgstr "Export SVG"

#: FlatCAMApp.py:6171
msgid "[WARNING_NOTCL] Export SVG cancelled."
msgstr "[WARNING_NOTCL] Export SVG cancelled."

#: FlatCAMApp.py:6190
msgid "[[WARNING_NOTCL]] Data must be a 3D array with last dimension 3 or 4"
msgstr "[[WARNING_NOTCL]] Data must be a 3D array with last dimension 3 or 4"

#: FlatCAMApp.py:6196 FlatCAMApp.py:6200
msgid "Export PNG Image"
msgstr "Export PNG Image"

#: FlatCAMApp.py:6205
msgid "Export PNG cancelled."
msgstr "Export PNG cancelled."

#: FlatCAMApp.py:6224
msgid ""
"[WARNING_NOTCL] No object selected. Please select an Gerber object to export."
msgstr ""
"[WARNING_NOTCL] No object selected. Please select an Gerber object to export."

#: FlatCAMApp.py:6229 FlatCAMApp.py:6352
msgid ""
"[ERROR_NOTCL] Failed. Only Gerber objects can be saved as Gerber files..."
msgstr ""
"[ERROR_NOTCL] Failed. Only Gerber objects can be saved as Gerber files..."

#: FlatCAMApp.py:6241
msgid "Save Gerber source file"
msgstr "Save Gerber source file"

#: FlatCAMApp.py:6246
msgid "[WARNING_NOTCL] Save Gerber source file cancelled."
msgstr "[WARNING_NOTCL] Save Gerber source file cancelled."

#: FlatCAMApp.py:6265
msgid ""
"[WARNING_NOTCL] No object selected. Please select an Excellon object to "
"export."
msgstr ""
"[WARNING_NOTCL] No object selected. Please select an Excellon object to "
"export."

#: FlatCAMApp.py:6270 FlatCAMApp.py:6311
msgid ""
"[ERROR_NOTCL] Failed. Only Excellon objects can be saved as Excellon files..."
msgstr ""
"[ERROR_NOTCL] Failed. Only Excellon objects can be saved as Excellon files..."

#: FlatCAMApp.py:6278 FlatCAMApp.py:6282
msgid "Save Excellon source file"
msgstr "Save Excellon source file"

#: FlatCAMApp.py:6287
msgid "[WARNING_NOTCL] Saving Excellon source file cancelled."
msgstr "[WARNING_NOTCL] Saving Excellon source file cancelled."

#: FlatCAMApp.py:6306
msgid ""
"[WARNING_NOTCL] No object selected. Please Select an Excellon object to "
"export."
msgstr ""
"[WARNING_NOTCL] No object selected. Please Select an Excellon object to "
"export."

#: FlatCAMApp.py:6319 FlatCAMApp.py:6323
msgid "Export Excellon"
msgstr "Export Excellon"

#: FlatCAMApp.py:6328
msgid "[WARNING_NOTCL] Export Excellon cancelled."
msgstr "[WARNING_NOTCL] Export Excellon cancelled."

#: FlatCAMApp.py:6347
msgid ""
"[WARNING_NOTCL] No object selected. Please Select an Gerber object to export."
msgstr ""
"[WARNING_NOTCL] No object selected. Please Select an Gerber object to export."

#: FlatCAMApp.py:6360 FlatCAMApp.py:6364
msgid "Export Gerber"
msgstr "Export Gerber"

#: FlatCAMApp.py:6369
msgid "[WARNING_NOTCL] Export Gerber cancelled."
msgstr "[WARNING_NOTCL] Export Gerber cancelled."

#: FlatCAMApp.py:6399
msgid "[ERROR_NOTCL] Only Geometry objects can be used."
msgstr "[ERROR_NOTCL] Only Geometry objects can be used."

#: FlatCAMApp.py:6413 FlatCAMApp.py:6417
msgid "Export DXF"
msgstr "Export DXF"

#: FlatCAMApp.py:6423
msgid "[WARNING_NOTCL] Export DXF cancelled."
msgstr "[WARNING_NOTCL] Export DXF cancelled."

#: FlatCAMApp.py:6443 FlatCAMApp.py:6446
msgid "Import SVG"
msgstr "Import SVG"

#: FlatCAMApp.py:6455
msgid "[WARNING_NOTCL] Open SVG cancelled."
msgstr "[WARNING_NOTCL] Open SVG cancelled."

#: FlatCAMApp.py:6474 FlatCAMApp.py:6478
msgid "Import DXF"
msgstr "Import DXF"

#: FlatCAMApp.py:6487
msgid "[WARNING_NOTCL] Open DXF cancelled."
msgstr "[WARNING_NOTCL] Open DXF cancelled."

#: FlatCAMApp.py:6505
#, python-format
msgid "%s"
msgstr "%s"

#: FlatCAMApp.py:6525
msgid ""
"[WARNING_NOTCL] Select an Gerber or Excellon file to view it's source file."
msgstr ""
"[WARNING_NOTCL] Select an Gerber or Excellon file to view it's source file."

#: FlatCAMApp.py:6532
msgid ""
"[WARNING_NOTCL] There is no selected object for which to see it's source "
"file code."
msgstr ""
"[WARNING_NOTCL] There is no selected object for which to see it's source "
"file code."

#: FlatCAMApp.py:6540
msgid "Source Editor"
msgstr "Source Editor"

#: FlatCAMApp.py:6550
#, python-format
msgid "[ERROR]App.on_view_source() -->%s"
msgstr "[ERROR]App.on_view_source() -->%s"

#: FlatCAMApp.py:6562 FlatCAMApp.py:7704 FlatCAMObj.py:5581
msgid "Code Editor"
msgstr "Code Editor"

#: FlatCAMApp.py:6574
msgid "Script Editor"
msgstr "Script Editor"

#: FlatCAMApp.py:6577
msgid ""
"#\n"
"# CREATE A NEW FLATCAM TCL SCRIPT\n"
"# TCL Tutorial here: https://www.tcl.tk/man/tcl8.5/tutorial/tcltutorial."
"html\n"
"#\n"
"\n"
"# FlatCAM commands list:\n"
"# AddCircle, AddPolygon, AddPolyline, AddRectangle, AlignDrill, "
"AlignDrillGrid, ClearShell, Cncjob,\n"
"# Cutout, Delete, Drillcncjob, ExportGcode, ExportSVG, Exteriors, GeoCutout, "
"GeoUnion, GetNames, GetSys,\n"
"# ImportSvg, Interiors, Isolate, Follow, JoinExcellon, JoinGeometry, "
"ListSys, MillHoles, Mirror, New,\n"
"# NewGeometry, Offset, OpenExcellon, OpenGCode, OpenGerber, OpenProject, "
"Options, Paint, Panelize,\n"
"# Plot, SaveProject, SaveSys, Scale, SetActive, SetSys, Skew, SubtractPoly,"
"SubtractRectangle, Version,\n"
"# WriteGCode\n"
"#\n"
"\n"
msgstr ""
"#\n"
"# CREATE A NEW FLATCAM TCL SCRIPT\n"
"# TCL Tutorial here: https://www.tcl.tk/man/tcl8.5/tutorial/tcltutorial."
"html\n"
"#\n"
"\n"
"# FlatCAM commands list:\n"
"# AddCircle, AddPolygon, AddPolyline, AddRectangle, AlignDrill, "
"AlignDrillGrid, ClearShell, Cncjob,\n"
"# Cutout, Delete, Drillcncjob, ExportGcode, ExportSVG, Exteriors, GeoCutout, "
"GeoUnion, GetNames, GetSys,\n"
"# ImportSvg, Interiors, Isolate, Follow, JoinExcellon, JoinGeometry, "
"ListSys, MillHoles, Mirror, New,\n"
"# NewGeometry, Offset, OpenExcellon, OpenGCode, OpenGerber, OpenProject, "
"Options, Paint, Panelize,\n"
"# Plot, SaveProject, SaveSys, Scale, SetActive, SetSys, Skew, SubtractPoly,"
"SubtractRectangle, Version,\n"
"# WriteGCode\n"
"#\n"
"\n"

#: FlatCAMApp.py:6600 FlatCAMApp.py:6603
msgid "Open TCL script"
msgstr "Open TCL script"

#: FlatCAMApp.py:6611
msgid "[WARNING_NOTCL] Open TCL script cancelled."
msgstr "[WARNING_NOTCL] Open TCL script cancelled."

#: FlatCAMApp.py:6623
#, python-format
msgid "[ERROR]App.on_fileopenscript() -->%s"
msgstr "[ERROR]App.on_fileopenscript() -->%s"

#: FlatCAMApp.py:6649 FlatCAMApp.py:6652
msgid "Run TCL script"
msgstr "Run TCL script"

#: FlatCAMApp.py:6660
msgid "[WARNING_NOTCL] Run TCL script cancelled."
msgstr "[WARNING_NOTCL] Run TCL script cancelled."

#: FlatCAMApp.py:6710 FlatCAMApp.py:6714
msgid "Save Project As ..."
msgstr "Save Project As ..."

#: FlatCAMApp.py:6711
#, python-brace-format
msgid "{l_save}/Project_{date}"
msgstr "{l_save}/Project_{date}"

#: FlatCAMApp.py:6719
msgid "[WARNING_NOTCL] Save Project cancelled."
msgstr "[WARNING_NOTCL] Save Project cancelled."

#: FlatCAMApp.py:6763
msgid "Exporting SVG"
msgstr "Exporting SVG"

#: FlatCAMApp.py:6797 FlatCAMApp.py:6903 FlatCAMApp.py:7018
#, python-format
msgid "[success] SVG file exported to %s"
msgstr "[success] SVG file exported to %s"

#: FlatCAMApp.py:6828 FlatCAMApp.py:6949
#, python-format
msgid "[WARNING_NOTCL] No object Box. Using instead %s"
msgstr "[WARNING_NOTCL] No object Box. Using instead %s"

#: FlatCAMApp.py:6906 FlatCAMApp.py:7021
msgid "Generating Film ... Please wait."
msgstr "Generating Film ... Please wait."

#: FlatCAMApp.py:7169
#, python-format
msgid "[success] Excellon file exported to %s"
msgstr "[success] Excellon file exported to %s"

#: FlatCAMApp.py:7176
msgid "Exporting Excellon"
msgstr "Exporting Excellon"

#: FlatCAMApp.py:7181 FlatCAMApp.py:7188
msgid "[ERROR_NOTCL] Could not export Excellon file."
msgstr "[ERROR_NOTCL] Could not export Excellon file."

#: FlatCAMApp.py:7286
#, python-format
msgid "[success] Gerber file exported to %s"
msgstr "[success] Gerber file exported to %s"

#: FlatCAMApp.py:7293
msgid "Exporting Gerber"
msgstr "Exporting Gerber"

#: FlatCAMApp.py:7298 FlatCAMApp.py:7305
msgid "[ERROR_NOTCL] Could not export Gerber file."
msgstr "[ERROR_NOTCL] Could not export Gerber file."

#: FlatCAMApp.py:7345
#, python-format
msgid "[success] DXF file exported to %s"
msgstr "[success] DXF file exported to %s"

#: FlatCAMApp.py:7351
msgid "Exporting DXF"
msgstr "Exporting DXF"

#: FlatCAMApp.py:7356 FlatCAMApp.py:7363
msgid "[[WARNING_NOTCL]] Could not export DXF file."
msgstr "[[WARNING_NOTCL]] Could not export DXF file."

#: FlatCAMApp.py:7383 FlatCAMApp.py:7425 FlatCAMApp.py:7469
msgid ""
"[ERROR_NOTCL] Not supported type is picked as parameter. Only Geometry and "
"Gerber are supported"
msgstr ""
"[ERROR_NOTCL] Not supported type is picked as parameter. Only Geometry and "
"Gerber are supported"

#: FlatCAMApp.py:7393
msgid "Importing SVG"
msgstr "Importing SVG"

#: FlatCAMApp.py:7404 FlatCAMApp.py:7446 FlatCAMApp.py:7489 FlatCAMApp.py:7566
#: FlatCAMApp.py:7627 FlatCAMApp.py:7690 flatcamTools/ToolPDF.py:212
#, python-format
msgid "[success] Opened: %s"
msgstr "[success] Opened: %s"

#: FlatCAMApp.py:7435
msgid "Importing DXF"
msgstr "Importing DXF"

#: FlatCAMApp.py:7477
msgid "Importing Image"
msgstr "Importing Image"

#: FlatCAMApp.py:7518 FlatCAMApp.py:7520
#, python-format
msgid "[ERROR_NOTCL] Failed to open file: %s"
msgstr "[ERROR_NOTCL] Failed to open file: %s"

#: FlatCAMApp.py:7523
#, python-brace-format
msgid "[ERROR_NOTCL] Failed to parse file: {name}. {error}"
msgstr "[ERROR_NOTCL] Failed to parse file: {name}. {error}"

#: FlatCAMApp.py:7530 FlatCAMObj.py:4266
#: flatcamEditors/FlatCAMExcEditor.py:2077
msgid "[ERROR] An internal error has ocurred. See shell.\n"
msgstr "[ERROR] An internal error has ocurred. See shell.\n"

#: FlatCAMApp.py:7539
msgid ""
"[ERROR_NOTCL] Object is not Gerber file or empty. Aborting object creation."
msgstr ""
"[ERROR_NOTCL] Object is not Gerber file or empty. Aborting object creation."

#: FlatCAMApp.py:7547
msgid "Opening Gerber"
msgstr "Opening Gerber"

#: FlatCAMApp.py:7557
msgid "[ERROR_NOTCL] Open Gerber failed. Probable not a Gerber file."
msgstr "[ERROR_NOTCL] Open Gerber failed. Probable not a Gerber file."

#: FlatCAMApp.py:7590 flatcamTools/ToolPcbWizard.py:421
msgid "[ERROR_NOTCL] This is not Excellon file."
msgstr "[ERROR_NOTCL] This is not Excellon file."

#: FlatCAMApp.py:7593
#, python-format
msgid "[ERROR_NOTCL] Cannot open file: %s"
msgstr "[ERROR_NOTCL] Cannot open file: %s"

#: FlatCAMApp.py:7598 flatcamTools/ToolPcbWizard.py:429
msgid "[ERROR_NOTCL] An internal error has occurred. See shell.\n"
msgstr "[ERROR_NOTCL] An internal error has occurred. See shell.\n"

#: FlatCAMApp.py:7611 flatcamTools/ToolPDF.py:262
#: flatcamTools/ToolPcbWizard.py:442
#, python-format
msgid "[ERROR_NOTCL] No geometry found in file: %s"
msgstr "[ERROR_NOTCL] No geometry found in file: %s"

#: FlatCAMApp.py:7614
msgid "Opening Excellon."
msgstr "Opening Excellon."

#: FlatCAMApp.py:7620
msgid "[ERROR_NOTCL] Open Excellon file failed. Probable not an Excellon file."
msgstr ""
"[ERROR_NOTCL] Open Excellon file failed. Probable not an Excellon file."

#: FlatCAMApp.py:7657
#, python-format
msgid "[ERROR_NOTCL] Failed to open %s"
msgstr "[ERROR_NOTCL] Failed to open %s"

#: FlatCAMApp.py:7667
msgid "[ERROR_NOTCL] This is not GCODE"
msgstr "[ERROR_NOTCL] This is not GCODE"

#: FlatCAMApp.py:7673
msgid "Opening G-Code."
msgstr "Opening G-Code."

#: FlatCAMApp.py:7681
msgid ""
"[ERROR_NOTCL] Failed to create CNCJob Object. Probable not a GCode file.\n"
" Attempting to create a FlatCAM CNCJob Object from G-Code file failed during "
"processing"
msgstr ""
"[ERROR_NOTCL] Failed to create CNCJob Object. Probable not a GCode file.\n"
" Attempting to create a FlatCAM CNCJob Object from G-Code file failed during "
"processing"

#: FlatCAMApp.py:7721
#, python-format
msgid "[ERROR_NOTCL] Failed to open config file: %s"
msgstr "[ERROR_NOTCL] Failed to open config file: %s"

#: FlatCAMApp.py:7747 FlatCAMApp.py:7764
#, python-format
msgid "[ERROR_NOTCL] Failed to open project file: %s"
msgstr "[ERROR_NOTCL] Failed to open project file: %s"

#: FlatCAMApp.py:7787
#, python-format
msgid "[success] Project loaded from: %s"
msgstr "[success] Project loaded from: %s"

#: FlatCAMApp.py:7892
msgid "Available commands:\n"
msgstr "Available commands:\n"

#: FlatCAMApp.py:7894
msgid ""
"\n"
"\n"
"Type help <command_name> for usage.\n"
" Example: help open_gerber"
msgstr ""
"\n"
"\n"
"Type help <command_name> for usage.\n"
" Example: help open_gerber"

#: FlatCAMApp.py:8044
msgid "Shows list of commands."
msgstr "Shows list of commands."

#: FlatCAMApp.py:8101
msgid "[ERROR_NOTCL] Failed to load recent item list."
msgstr "[ERROR_NOTCL] Failed to load recent item list."

#: FlatCAMApp.py:8108
msgid "[ERROR_NOTCL] Failed to parse recent item list."
msgstr "[ERROR_NOTCL] Failed to parse recent item list."

#: FlatCAMApp.py:8169 flatcamGUI/FlatCAMGUI.py:968
msgid "<b>Shortcut Key List</b>"
msgstr "<b>Shortcut Key List</b>"

#: FlatCAMApp.py:8176
msgid ""
"\n"
"<p><span style=\"font-size:14px\"><strong>Selected Tab - Choose an Item from "
"Project Tab</strong></span></p>\n"
"\n"
"<p><span style=\"font-size:10px\"><strong>Details</strong>:<br />\n"
"The normal flow when working in FlatCAM is the following:</span></p>\n"
"\n"
"<ol>\n"
"\t<li><span style=\"font-size:10px\">Loat/Import a Gerber, Excellon, Gcode, "
"DXF, Raster Image or SVG file into FlatCAM using either the menu&#39;s, "
"toolbars, key shortcuts or even dragging and dropping the files on the GUI."
"<br />\n"
"\t<br />\n"
"\tYou can also load a <strong>FlatCAM project</strong> by double clicking on "
"the project file, drag &amp; drop of the file into the FLATCAM GUI or "
"through the menu/toolbar links offered within the app.</span><br />\n"
"\t&nbsp;</li>\n"
"\t<li><span style=\"font-size:10px\">Once an object is available in the "
"Project Tab, by selecting it and then focusing on <strong>SELECTED TAB </"
"strong>(more simpler is to double click the object name in the Project Tab), "
"<strong>SELECTED TAB </strong>will be updated with the object properties "
"according to it&#39;s kind: Gerber, Excellon, Geometry or CNCJob object.<br /"
">\n"
"\t<br />\n"
"\tIf the selection of the object is done on the canvas by single click "
"instead, and the <strong>SELECTED TAB</strong> is in focus, again the object "
"properties will be displayed into the Selected Tab. Alternatively, double "
"clicking on the object on the canvas will bring the <strong>SELECTED TAB</"
"strong> and populate it even if it was out of focus.<br />\n"
"\t<br />\n"
"\tYou can change the parameters in this screen and the flow direction is "
"like this:<br />\n"
"\t<br />\n"
"\t<strong>Gerber/Excellon Object</strong> -&gt; Change Param -&gt; Generate "
"Geometry -&gt;<strong> Geometry Object </strong>-&gt; Add tools (change "
"param in Selected Tab) -&gt; Generate CNCJob -&gt;<strong> CNCJob Object </"
"strong>-&gt; Verify GCode (through Edit CNC Code) and/or append/prepend to "
"GCode (again, done in <strong>SELECTED TAB)&nbsp;</strong>-&gt; Save GCode</"
"span></li>\n"
"</ol>\n"
"\n"
"<p><span style=\"font-size:10px\">A list of key shortcuts is available "
"through an menu entry in <strong>Help -&gt; Shortcuts List</strong>&nbsp;or "
"through it&#39;s own key shortcut: <strng>F3</strong>.</span></p>\n"
"\n"
"        "
msgstr ""
"\n"
"<p><span style=\"font-size:14px\"><strong>Selected Tab - Choose an Item from "
"Project Tab</strong></span></p>\n"
"\n"
"<p><span style=\"font-size:10px\"><strong>Details</strong>:<br />\n"
"The normal flow when working in FlatCAM is the following:</span></p>\n"
"\n"
"<ol>\n"
"\t<li><span style=\"font-size:10px\">Loat/Import a Gerber, Excellon, Gcode, "
"DXF, Raster Image or SVG file into FlatCAM using either the menu&#39;s, "
"toolbars, key shortcuts or even dragging and dropping the files on the GUI."
"<br />\n"
"\t<br />\n"
"\tYou can also load a <strong>FlatCAM project</strong> by double clicking on "
"the project file, drag &amp; drop of the file into the FLATCAM GUI or "
"through the menu/toolbar links offered within the app.</span><br />\n"
"\t&nbsp;</li>\n"
"\t<li><span style=\"font-size:10px\">Once an object is available in the "
"Project Tab, by selecting it and then focusing on <strong>SELECTED TAB </"
"strong>(more simpler is to double click the object name in the Project Tab), "
"<strong>SELECTED TAB </strong>will be updated with the object properties "
"according to it&#39;s kind: Gerber, Excellon, Geometry or CNCJob object.<br /"
">\n"
"\t<br />\n"
"\tIf the selection of the object is done on the canvas by single click "
"instead, and the <strong>SELECTED TAB</strong> is in focus, again the object "
"properties will be displayed into the Selected Tab. Alternatively, double "
"clicking on the object on the canvas will bring the <strong>SELECTED TAB</"
"strong> and populate it even if it was out of focus.<br />\n"
"\t<br />\n"
"\tYou can change the parameters in this screen and the flow direction is "
"like this:<br />\n"
"\t<br />\n"
"\t<strong>Gerber/Excellon Object</strong> -&gt; Change Param -&gt; Generate "
"Geometry -&gt;<strong> Geometry Object </strong>-&gt; Add tools (change "
"param in Selected Tab) -&gt; Generate CNCJob -&gt;<strong> CNCJob Object </"
"strong>-&gt; Verify GCode (through Edit CNC Code) and/or append/prepend to "
"GCode (again, done in <strong>SELECTED TAB)&nbsp;</strong>-&gt; Save GCode</"
"span></li>\n"
"</ol>\n"
"\n"
"<p><span style=\"font-size:10px\">A list of key shortcuts is available "
"through an menu entry in <strong>Help -&gt; Shortcuts List</strong>&nbsp;or "
"through it&#39;s own key shortcut: <strng>F3</strong>.</span></p>\n"
"\n"
"        "

#: FlatCAMApp.py:8280
msgid "[WARNING_NOTCL] Failed checking for latest version. Could not connect."
msgstr "[WARNING_NOTCL] Failed checking for latest version. Could not connect."

#: FlatCAMApp.py:8287
msgid "[ERROR_NOTCL] Could not parse information about latest version."
msgstr "[ERROR_NOTCL] Could not parse information about latest version."

#: FlatCAMApp.py:8297
msgid "[success] FlatCAM is up to date!"
msgstr "[success] FlatCAM is up to date!"

#: FlatCAMApp.py:8302
msgid "Newer Version Available"
msgstr "Newer Version Available"

#: FlatCAMApp.py:8303
msgid ""
"There is a newer version of FlatCAM available for download:\n"
"\n"
msgstr ""
"There is a newer version of FlatCAM available for download:\n"
"\n"

#: FlatCAMApp.py:8305
msgid "info"
msgstr "info"

#: FlatCAMApp.py:8324
msgid "[success] All plots disabled."
msgstr "[success] All plots disabled."

#: FlatCAMApp.py:8330
msgid "[success] All non selected plots disabled."
msgstr "[success] All non selected plots disabled."

#: FlatCAMApp.py:8336
msgid "[success] All plots enabled."
msgstr "[success] All plots enabled."

#: FlatCAMApp.py:8342
#| msgid "[success] All plots enabled."
msgid "[success] Selected plots enabled..."
msgstr "[success] Selected plots enabled..."

#: FlatCAMApp.py:8350
#| msgid "[success] All non selected plots disabled."
msgid "[success] Selected plots disabled..."
msgstr "[success] Selected plots disabled..."

#: FlatCAMApp.py:8360 FlatCAMApp.py:8373
#| msgid "Moving ..."
msgid "Working ..."
msgstr "Working ..."

#: FlatCAMApp.py:8407
msgid "Saving FlatCAM Project"
msgstr "Saving FlatCAM Project"

#: FlatCAMApp.py:8428 FlatCAMApp.py:8459
#, python-format
msgid "[success] Project saved to: %s"
msgstr "[success] Project saved to: %s"

#: FlatCAMApp.py:8446
#, python-format
msgid "[ERROR_NOTCL] Failed to verify project file: %s. Retry to save it."
msgstr "[ERROR_NOTCL] Failed to verify project file: %s. Retry to save it."

#: FlatCAMApp.py:8453
#, python-format
msgid "[ERROR_NOTCL] Failed to parse saved project file: %s. Retry to save it."
msgstr ""
"[ERROR_NOTCL] Failed to parse saved project file: %s. Retry to save it."

#: FlatCAMApp.py:8461
#, python-format
msgid "[ERROR_NOTCL] Failed to save project file: %s. Retry to save it."
msgstr "[ERROR_NOTCL] Failed to save project file: %s. Retry to save it."

#: FlatCAMObj.py:202
#, python-brace-format
msgid "[success] Name changed from {old} to {new}"
msgstr "[success] Name changed from {old} to {new}"

#: FlatCAMObj.py:546 FlatCAMObj.py:2031 FlatCAMObj.py:3311 FlatCAMObj.py:5478
msgid "<span style=\"color:green;\"><b>Basic</b></span>"
msgstr "<span style=\"color:green;\"><b>Basic</b></span>"

#: FlatCAMObj.py:558 FlatCAMObj.py:2047 FlatCAMObj.py:3333 FlatCAMObj.py:5484
msgid "<span style=\"color:red;\"><b>Advanced</b></span>"
msgstr "<span style=\"color:red;\"><b>Advanced</b></span>"

#: FlatCAMObj.py:921 FlatCAMObj.py:976
#, python-format
msgid "[success] Isolation geometry created: %s"
msgstr "[success] Isolation geometry created: %s"

#: FlatCAMObj.py:1155
msgid "Plotting Apertures"
msgstr "Plotting Apertures"

#: FlatCAMObj.py:1870 flatcamEditors/FlatCAMExcEditor.py:1368
msgid "Total Drills"
msgstr "Total Drills"

#: FlatCAMObj.py:1896 flatcamEditors/FlatCAMExcEditor.py:1400
msgid "Total Slots"
msgstr "Total Slots"

#: FlatCAMObj.py:2103 FlatCAMObj.py:3384 FlatCAMObj.py:3682 FlatCAMObj.py:3869
#: FlatCAMObj.py:3882 FlatCAMObj.py:3999 FlatCAMObj.py:4416 FlatCAMObj.py:4653
#: FlatCAMObj.py:5061 flatcamEditors/FlatCAMExcEditor.py:1474
#: flatcamTools/ToolCalculators.py:307 flatcamTools/ToolCalculators.py:318
#: flatcamTools/ToolCalculators.py:330 flatcamTools/ToolCalculators.py:345
#: flatcamTools/ToolCalculators.py:358 flatcamTools/ToolCalculators.py:372
#: flatcamTools/ToolCalculators.py:383 flatcamTools/ToolCalculators.py:394
#: flatcamTools/ToolCalculators.py:405 flatcamTools/ToolFilm.py:241
#: flatcamTools/ToolFilm.py:248 flatcamTools/ToolNonCopperClear.py:480
#: flatcamTools/ToolNonCopperClear.py:551
#: flatcamTools/ToolNonCopperClear.py:627
#: flatcamTools/ToolNonCopperClear.py:644 flatcamTools/ToolPaint.py:538
#: flatcamTools/ToolPaint.py:608 flatcamTools/ToolPaint.py:743
#: flatcamTools/ToolPaint.py:844 flatcamTools/ToolPaint.py:999
#: flatcamTools/ToolPanelize.py:385 flatcamTools/ToolPanelize.py:397
#: flatcamTools/ToolPanelize.py:410 flatcamTools/ToolPanelize.py:423
#: flatcamTools/ToolPanelize.py:435 flatcamTools/ToolPanelize.py:446
#: flatcamTools/ToolSolderPaste.py:756 flatcamTools/ToolSolderPaste.py:827
msgid "[ERROR_NOTCL] Wrong value format entered, use a number."
msgstr "[ERROR_NOTCL] Wrong value format entered, use a number."

#: FlatCAMObj.py:2327 FlatCAMObj.py:2418 FlatCAMObj.py:2540
msgid ""
"[ERROR_NOTCL] Please select one or more tools from the list and try again."
msgstr ""
"[ERROR_NOTCL] Please select one or more tools from the list and try again."

#: FlatCAMObj.py:2334
msgid ""
"[ERROR_NOTCL] Milling tool for DRILLS is larger than hole size. Cancelled."
msgstr ""
"[ERROR_NOTCL] Milling tool for DRILLS is larger than hole size. Cancelled."

#: FlatCAMObj.py:2348 FlatCAMObj.py:2442 FlatCAMObj.py:2560
msgid "Tool_nr"
msgstr "Tool_nr"

#: FlatCAMObj.py:2348 FlatCAMObj.py:2442 FlatCAMObj.py:2560
#: flatcamEditors/FlatCAMExcEditor.py:819
#: flatcamEditors/FlatCAMExcEditor.py:2020 flatcamGUI/ObjectUI.py:556
#: flatcamTools/ToolNonCopperClear.py:83 flatcamTools/ToolPaint.py:80
#: flatcamTools/ToolPcbWizard.py:78 flatcamTools/ToolSolderPaste.py:81
msgid "Diameter"
msgstr "Diameter"

#: FlatCAMObj.py:2348 FlatCAMObj.py:2442 FlatCAMObj.py:2560
msgid "Drills_Nr"
msgstr "Drills_Nr"

#: FlatCAMObj.py:2348 FlatCAMObj.py:2442 FlatCAMObj.py:2560
msgid "Slots_Nr"
msgstr "Slots_Nr"

#: FlatCAMObj.py:2428
msgid ""
"[ERROR_NOTCL] Milling tool for SLOTS is larger than hole size. Cancelled."
msgstr ""
"[ERROR_NOTCL] Milling tool for SLOTS is larger than hole size. Cancelled."

#: FlatCAMObj.py:2602 FlatCAMObj.py:4304 FlatCAMObj.py:4519 FlatCAMObj.py:4836
msgid ""
"[ERROR_NOTCL] Wrong value format for self.defaults[\"z_pdepth\"] or self."
"options[\"z_pdepth\"]"
msgstr ""
"[ERROR_NOTCL] Wrong value format for self.defaults[\"z_pdepth\"] or self."
"options[\"z_pdepth\"]"

#: FlatCAMObj.py:2614 FlatCAMObj.py:4316 FlatCAMObj.py:4531 FlatCAMObj.py:4848
msgid ""
"[ERROR_NOTCL] Wrong value format for self.defaults[\"feedrate_probe\"] or "
"self.options[\"feedrate_probe\"]"
msgstr ""
"[ERROR_NOTCL] Wrong value format for self.defaults[\"feedrate_probe\"] or "
"self.options[\"feedrate_probe\"]"

#: FlatCAMObj.py:2646 FlatCAMObj.py:4723 FlatCAMObj.py:4728 FlatCAMObj.py:4874
msgid "Generating CNC Code"
msgstr "Generating CNC Code"

#: FlatCAMObj.py:2672 FlatCAMObj.py:5020 camlib.py:5152 camlib.py:5611
#: camlib.py:5874
msgid ""
"[ERROR]The Toolchange X,Y field in Edit -> Preferences has to be in the "
"format (x, y) \n"
"but now there is only one value, not two. "
msgstr ""
"[ERROR]The Toolchange X,Y field in Edit -> Preferences has to be in the "
"format (x, y) \n"
"but now there is only one value, not two. "

#: FlatCAMObj.py:3020 FlatCAMObj.py:3925 FlatCAMObj.py:3926 FlatCAMObj.py:3935
msgid "Iso"
msgstr "Iso"

#: FlatCAMObj.py:3020 FlatCAMObj.py:3269 FlatCAMObj.py:3549
msgid "Rough"
msgstr "Rough"

#: FlatCAMObj.py:3020
msgid "Finish"
msgstr "Finish"

#: FlatCAMObj.py:3304 flatcamGUI/FlatCAMGUI.py:526 flatcamGUI/FlatCAMGUI.py:722
#: flatcamGUI/FlatCAMGUI.py:1615 flatcamGUI/FlatCAMGUI.py:1951
#: flatcamGUI/ObjectUI.py:999
msgid "Copy"
msgstr "Copy"

#: FlatCAMObj.py:3519
msgid "[ERROR_NOTCL] Please enter the desired tool diameter in Float format."
msgstr "[ERROR_NOTCL] Please enter the desired tool diameter in Float format."

#: FlatCAMObj.py:3592
msgid "[success] Tool added in Tool Table."
msgstr "[success] Tool added in Tool Table."

#: FlatCAMObj.py:3597
msgid "[ERROR_NOTCL] Default Tool added. Wrong value format entered."
msgstr "[ERROR_NOTCL] Default Tool added. Wrong value format entered."

#: FlatCAMObj.py:3627 FlatCAMObj.py:3637
msgid "[WARNING_NOTCL] Failed. Select a tool to copy."
msgstr "[WARNING_NOTCL] Failed. Select a tool to copy."

#: FlatCAMObj.py:3666
msgid "[success] Tool was copied in Tool Table."
msgstr "[success] Tool was copied in Tool Table."

#: FlatCAMObj.py:3699
msgid "[success] Tool was edited in Tool Table."
msgstr "[success] Tool was edited in Tool Table."

#: FlatCAMObj.py:3730 FlatCAMObj.py:3740
msgid "[WARNING_NOTCL] Failed. Select a tool to delete."
msgstr "[WARNING_NOTCL] Failed. Select a tool to delete."

#: FlatCAMObj.py:3764
msgid "[success] Tool was deleted in Tool Table."
msgstr "[success] Tool was deleted in Tool Table."

#: FlatCAMObj.py:4185
#, python-format
msgid ""
"[WARNING_NOTCL] This Geometry can't be processed because it is %s geometry."
msgstr ""
"[WARNING_NOTCL] This Geometry can't be processed because it is %s geometry."

#: FlatCAMObj.py:4202
msgid "[ERROR_NOTCL] Wrong Tool Dia value format entered, use a number."
msgstr "[ERROR_NOTCL] Wrong Tool Dia value format entered, use a number."

#: FlatCAMObj.py:4229
msgid "[ERROR_NOTCL] Failed. No tool selected in the tool table ..."
msgstr "[ERROR_NOTCL] Failed. No tool selected in the tool table ..."

#: FlatCAMObj.py:4267
#, python-format
msgid "FlatCAMObj.FlatCAMGeometry.mtool_gen_cncjob() --> %s"
msgstr "FlatCAMObj.FlatCAMGeometry.mtool_gen_cncjob() --> %s"

#: FlatCAMObj.py:4425 FlatCAMObj.py:4662
msgid ""
"[WARNING] Tool Offset is selected in Tool Table but no value is provided.\n"
"Add a Tool Offset or change the Offset Type."
msgstr ""
"[WARNING] Tool Offset is selected in Tool Table but no value is provided.\n"
"Add a Tool Offset or change the Offset Type."

#: FlatCAMObj.py:4543 flatcamTools/ToolSolderPaste.py:1107
#: flatcamTools/ToolSolderPaste.py:1162
msgid "[ERROR_NOTCL] Cancelled. Empty file, it has no geometry..."
msgstr "[ERROR_NOTCL] Cancelled. Empty file, it has no geometry..."

#: FlatCAMObj.py:4907 FlatCAMObj.py:4917 camlib.py:3335 camlib.py:3344
msgid "[ERROR_NOTCL] Scale factor has to be a number: integer or float."
msgstr "[ERROR_NOTCL] Scale factor has to be a number: integer or float."

#: FlatCAMObj.py:4955
msgid "[success] Geometry Scale done."
msgstr "[success] Geometry Scale done."

#: FlatCAMObj.py:4972 camlib.py:3414
msgid ""
"[ERROR_NOTCL] An (x,y) pair of values are needed. Probable you entered only "
"one value in the Offset field."
msgstr ""
"[ERROR_NOTCL] An (x,y) pair of values are needed. Probable you entered only "
"one value in the Offset field."

#: FlatCAMObj.py:4992
msgid "[success] Geometry Offset done."
msgstr "[success] Geometry Offset done."

#: FlatCAMObj.py:5546 FlatCAMObj.py:5551 flatcamTools/ToolSolderPaste.py:1361
msgid "Export Machine Code ..."
msgstr "Export Machine Code ..."

#: FlatCAMObj.py:5557 flatcamTools/ToolSolderPaste.py:1364
msgid "[WARNING_NOTCL] Export Machine Code cancelled ..."
msgstr "[WARNING_NOTCL] Export Machine Code cancelled ..."

#: FlatCAMObj.py:5570
#, python-format
msgid "[success] Machine Code file saved to: %s"
msgstr "[success] Machine Code file saved to: %s"

#: FlatCAMObj.py:5592
#, python-format
msgid "[ERROR]FlatCAMCNNJob.on_edit_code_click() -->%s"
msgstr "[ERROR]FlatCAMCNNJob.on_edit_code_click() -->%s"

#: FlatCAMObj.py:5709
#, python-format
msgid ""
"[WARNING_NOTCL] This CNCJob object can't be processed because it is a %s "
"CNCJob object."
msgstr ""
"[WARNING_NOTCL] This CNCJob object can't be processed because it is a %s "
"CNCJob object."

#: FlatCAMObj.py:5762
msgid "[ERROR_NOTCL] G-code does not have a units code: either G20 or G21"
msgstr "[ERROR_NOTCL] G-code does not have a units code: either G20 or G21"

#: FlatCAMObj.py:5775
msgid ""
"[ERROR_NOTCL] Cancelled. The Toolchange Custom code is enabled but it's "
"empty."
msgstr ""
"[ERROR_NOTCL] Cancelled. The Toolchange Custom code is enabled but it's "
"empty."

#: FlatCAMObj.py:5782
msgid "[success] Toolchange G-code was replaced by a custom code."
msgstr "[success] Toolchange G-code was replaced by a custom code."

#: FlatCAMObj.py:5797 flatcamTools/ToolSolderPaste.py:1390
msgid "[WARNING_NOTCL] No such file or directory"
msgstr "[WARNING_NOTCL] No such file or directory"

#: FlatCAMObj.py:5817 FlatCAMObj.py:5829
msgid ""
"[WARNING_NOTCL] The used postprocessor file has to have in it's name: "
"'toolchange_custom'"
msgstr ""
"[WARNING_NOTCL] The used postprocessor file has to have in it's name: "
"'toolchange_custom'"

#: FlatCAMObj.py:5835
msgid "[ERROR] There is no postprocessor file."
msgstr "[ERROR] There is no postprocessor file."

#: ObjectCollection.py:420
#, python-brace-format
msgid "Object renamed from <b>{old}</b> to <b>{new}</b>"
msgstr "Object renamed from <b>{old}</b> to <b>{new}</b>"

#: ObjectCollection.py:757
#, python-format
msgid "[ERROR] Cause of error: %s"
msgstr "[ERROR] Cause of error: %s"

#: camlib.py:198
msgid "[ERROR_NOTCL] self.solid_geometry is neither BaseGeometry or list."
msgstr "[ERROR_NOTCL] self.solid_geometry is neither BaseGeometry or list."

#: camlib.py:1381
msgid "[success] Object was mirrored ..."
msgstr "[success] Object was mirrored ..."

#: camlib.py:1383
msgid "[ERROR_NOTCL] Failed to mirror. No object selected"
msgstr "[ERROR_NOTCL] Failed to mirror. No object selected"

#: camlib.py:1419
msgid "[success] Object was rotated ..."
msgstr "[success] Object was rotated ..."

#: camlib.py:1421
msgid "[ERROR_NOTCL] Failed to rotate. No object selected"
msgstr "[ERROR_NOTCL] Failed to rotate. No object selected"

#: camlib.py:1455
msgid "[success] Object was skewed ..."
msgstr "[success] Object was skewed ..."

#: camlib.py:1457
msgid "[ERROR_NOTCL] Failed to skew. No object selected"
msgstr "[ERROR_NOTCL] Failed to skew. No object selected"

#: camlib.py:2717 camlib.py:2802
#, python-format
msgid "[WARNING] Coordinates missing, line ignored: %s"
msgstr "[WARNING] Coordinates missing, line ignored: %s"

#: camlib.py:2718 camlib.py:2803
msgid "[WARNING_NOTCL] GERBER file might be CORRUPT. Check the file !!!"
msgstr "[WARNING_NOTCL] GERBER file might be CORRUPT. Check the file !!!"

#: camlib.py:2767
#, python-format
msgid ""
"[ERROR] Region does not have enough points. File will be processed but there "
"are parser errors. Line number: %s"
msgstr ""
"[ERROR] Region does not have enough points. File will be processed but there "
"are parser errors. Line number: %s"

#: camlib.py:3159
#, python-format
msgid ""
"[ERROR]Gerber Parser ERROR.\n"
"%s:"
msgstr ""
"[ERROR]Gerber Parser ERROR.\n"
"%s:"

#: camlib.py:3381
msgid "[success] Gerber Scale done."
msgstr "[success] Gerber Scale done."

#: camlib.py:3447
msgid "[success] Gerber Offset done."
msgstr "[success] Gerber Offset done."

#: camlib.py:3501
msgid "[success] Gerber Mirror done."
msgstr "[success] Gerber Mirror done."

#: camlib.py:3547
msgid "[success] Gerber Skew done."
msgstr "[success] Gerber Skew done."

#: camlib.py:3585
msgid "[success] Gerber Rotate done."
msgstr "[success] Gerber Rotate done."

#: camlib.py:3864
#, python-format
msgid "[ERROR_NOTCL] This is GCODE mark: %s"
msgstr "[ERROR_NOTCL] This is GCODE mark: %s"

#: camlib.py:3979
#, python-format
msgid ""
"[WARNING] No tool diameter info's. See shell.\n"
"A tool change event: T%s was found but the Excellon file have no "
"informations regarding the tool diameters therefore the application will try "
"to load it by using some 'fake' diameters.\n"
"The user needs to edit the resulting Excellon object and change the "
"diameters to reflect the real diameters."
msgstr ""
"[WARNING] No tool diameter info's. See shell.\n"
"A tool change event: T%s was found but the Excellon file have no "
"informations regarding the tool diameters therefore the application will try "
"to load it by using some 'fake' diameters.\n"
"The user needs to edit the resulting Excellon object and change the "
"diameters to reflect the real diameters."

#: camlib.py:4444
#, python-brace-format
msgid ""
"[ERROR] Excellon Parser error.\n"
"Parsing Failed. Line {l_nr}: {line}\n"
msgstr ""
"[ERROR] Excellon Parser error.\n"
"Parsing Failed. Line {l_nr}: {line}\n"

#: camlib.py:4521
msgid ""
"[WARNING] Excellon.create_geometry() -> a drill location was skipped due of "
"not having a tool associated.\n"
"Check the resulting GCode."
msgstr ""
"[WARNING] Excellon.create_geometry() -> a drill location was skipped due of "
"not having a tool associated.\n"
"Check the resulting GCode."

#: camlib.py:5061
#, python-format
msgid "[ERROR] There is no such parameter: %s"
msgstr "[ERROR] There is no such parameter: %s"

#: camlib.py:5131
msgid ""
"[WARNING] The Cut Z parameter has positive value. It is the depth value to "
"drill into material.\n"
"The Cut Z parameter needs to have a negative value, assuming it is a typo "
"therefore the app will convert the value to negative. Check the resulting "
"CNC code (Gcode etc)."
msgstr ""
"[WARNING] The Cut Z parameter has positive value. It is the depth value to "
"drill into material.\n"
"The Cut Z parameter needs to have a negative value, assuming it is a typo "
"therefore the app will convert the value to negative. Check the resulting "
"CNC code (Gcode etc)."

#: camlib.py:5138 camlib.py:5634 camlib.py:5897
#, python-format
msgid ""
"[WARNING] The Cut Z parameter is zero. There will be no cut, skipping %s file"
msgstr ""
"[WARNING] The Cut Z parameter is zero. There will be no cut, skipping %s file"

#: camlib.py:5367 camlib.py:5464 camlib.py:5522
msgid "[ERROR_NOTCL] The loaded Excellon file has no drills ..."
msgstr "[ERROR_NOTCL] The loaded Excellon file has no drills ..."

#: camlib.py:5469
msgid "[ERROR_NOTCL] Wrong optimization type selected."
msgstr "[ERROR_NOTCL] Wrong optimization type selected."

#: camlib.py:5622 camlib.py:5885
msgid ""
"[ERROR_NOTCL] Cut_Z parameter is None or zero. Most likely a bad "
"combinations of other parameters."
msgstr ""
"[ERROR_NOTCL] Cut_Z parameter is None or zero. Most likely a bad "
"combinations of other parameters."

#: camlib.py:5627 camlib.py:5890
msgid ""
"[WARNING] The Cut Z parameter has positive value. It is the depth value to "
"cut into material.\n"
"The Cut Z parameter needs to have a negative value, assuming it is a typo "
"therefore the app will convert the value to negative.Check the resulting CNC "
"code (Gcode etc)."
msgstr ""
"[WARNING] The Cut Z parameter has positive value. It is the depth value to "
"cut into material.\n"
"The Cut Z parameter needs to have a negative value, assuming it is a typo "
"therefore the app will convert the value to negative.Check the resulting CNC "
"code (Gcode etc)."

#: camlib.py:5639 camlib.py:5902
msgid "[ERROR_NOTCL] Travel Z parameter is None or zero."
msgstr "[ERROR_NOTCL] Travel Z parameter is None or zero."

#: camlib.py:5643 camlib.py:5906
msgid ""
"[WARNING] The Travel Z parameter has negative value. It is the height value "
"to travel between cuts.\n"
"The Z Travel parameter needs to have a positive value, assuming it is a typo "
"therefore the app will convert the value to positive.Check the resulting CNC "
"code (Gcode etc)."
msgstr ""
"[WARNING] The Travel Z parameter has negative value. It is the height value "
"to travel between cuts.\n"
"The Z Travel parameter needs to have a positive value, assuming it is a typo "
"therefore the app will convert the value to positive.Check the resulting CNC "
"code (Gcode etc)."

#: camlib.py:5650 camlib.py:5913
#, python-format
msgid ""
"[WARNING] The Z Travel parameter is zero. This is dangerous, skipping %s file"
msgstr ""
"[WARNING] The Z Travel parameter is zero. This is dangerous, skipping %s file"

#: camlib.py:5780
#, python-format
msgid "[ERROR]Expected a Geometry, got %s"
msgstr "[ERROR]Expected a Geometry, got %s"

#: camlib.py:5786
msgid ""
"[ERROR_NOTCL] Trying to generate a CNC Job from a Geometry object without "
"solid_geometry."
msgstr ""
"[ERROR_NOTCL] Trying to generate a CNC Job from a Geometry object without "
"solid_geometry."

#: camlib.py:5825
msgid ""
"[ERROR_NOTCL] The Tool Offset value is too negative to use for the "
"current_geometry.\n"
"Raise the value (in module) and try again."
msgstr ""
"[ERROR_NOTCL] The Tool Offset value is too negative to use for the "
"current_geometry.\n"
"Raise the value (in module) and try again."

#: camlib.py:6039
msgid "[ERROR_NOTCL] There is no tool data in the SolderPaste geometry."
msgstr "[ERROR_NOTCL] There is no tool data in the SolderPaste geometry."

#: flatcamEditors/FlatCAMExcEditor.py:37 flatcamEditors/FlatCAMExcEditor.py:143
#: flatcamEditors/FlatCAMGrbEditor.py:229
#: flatcamEditors/FlatCAMGrbEditor.py:234
msgid "Click to place ..."
msgstr "Click to place ..."

#: flatcamEditors/FlatCAMExcEditor.py:46
msgid "[WARNING_NOTCL] To add a drill first select a tool"
msgstr "[WARNING_NOTCL] To add a drill first select a tool"

#: flatcamEditors/FlatCAMExcEditor.py:62 flatcamEditors/FlatCAMExcEditor.py:165
#: flatcamEditors/FlatCAMExcEditor.py:450
#: flatcamEditors/FlatCAMExcEditor.py:475
#: flatcamEditors/FlatCAMGrbEditor.py:451
#: flatcamEditors/FlatCAMGrbEditor.py:1776
#: flatcamEditors/FlatCAMGrbEditor.py:1804
msgid "Click on target location ..."
msgstr "Click on target location ..."

#: flatcamEditors/FlatCAMExcEditor.py:108
msgid "[success] Done. Drill added."
msgstr "[success] Done. Drill added."

#: flatcamEditors/FlatCAMExcEditor.py:150
msgid "[WARNING_NOTCL] To add an Drill Array first select a tool in Tool Table"
msgstr ""
"[WARNING_NOTCL] To add an Drill Array first select a tool in Tool Table"

#: flatcamEditors/FlatCAMExcEditor.py:182
msgid "Click on the Drill Circular Array Start position"
msgstr "Click on the Drill Circular Array Start position"

#: flatcamEditors/FlatCAMExcEditor.py:204
#: flatcamEditors/FlatCAMGrbEditor.py:494
msgid ""
"[ERROR_NOTCL] The value is not Float. Check for comma instead of dot "
"separator."
msgstr ""
"[ERROR_NOTCL] The value is not Float. Check for comma instead of dot "
"separator."

#: flatcamEditors/FlatCAMExcEditor.py:207
#, python-format
#| msgid "[ERROR_NOTCL] The value is mistyped. Check the value."
msgid "[ERROR_NOTCL] The value is mistyped. Check the value. %s"
msgstr "[ERROR_NOTCL] The value is mistyped. Check the value. %s"

#: flatcamEditors/FlatCAMExcEditor.py:305
msgid "[WARNING_NOTCL] Too many drills for the selected spacing angle."
msgstr "[WARNING_NOTCL] Too many drills for the selected spacing angle."

#: flatcamEditors/FlatCAMExcEditor.py:322
msgid "[success] Done. Drill Array added."
msgstr "[success] Done. Drill Array added."

#: flatcamEditors/FlatCAMExcEditor.py:333
msgid "Click on the Drill(s) to resize ..."
msgstr "Click on the Drill(s) to resize ..."

#: flatcamEditors/FlatCAMExcEditor.py:354
msgid ""
"[ERROR_NOTCL] Resize drill(s) failed. Please enter a diameter for resize."
msgstr ""
"[ERROR_NOTCL] Resize drill(s) failed. Please enter a diameter for resize."

#: flatcamEditors/FlatCAMExcEditor.py:424
msgid "[success] Done. Drill Resize completed."
msgstr "[success] Done. Drill Resize completed."

#: flatcamEditors/FlatCAMExcEditor.py:427
msgid "[WARNING_NOTCL] Cancelled. No drills selected for resize ..."
msgstr "[WARNING_NOTCL] Cancelled. No drills selected for resize ..."

#: flatcamEditors/FlatCAMExcEditor.py:452
#: flatcamEditors/FlatCAMGrbEditor.py:1778
msgid "Click on reference location ..."
msgstr "Click on reference location ..."

#: flatcamEditors/FlatCAMExcEditor.py:507
msgid "[success] Done. Drill(s) Move completed."
msgstr "[success] Done. Drill(s) Move completed."

#: flatcamEditors/FlatCAMExcEditor.py:592
msgid "[success] Done. Drill(s) copied."
msgstr "[success] Done. Drill(s) copied."

#: flatcamEditors/FlatCAMExcEditor.py:792 flatcamGUI/FlatCAMGUI.py:5026
msgid "Excellon Editor"
msgstr "Excellon Editor"

#: flatcamEditors/FlatCAMExcEditor.py:799
#: flatcamEditors/FlatCAMGrbEditor.py:2266
msgid "Name:"
msgstr "Name:"

#: flatcamEditors/FlatCAMExcEditor.py:805 flatcamTools/ToolNonCopperClear.py:72
#: flatcamTools/ToolPaint.py:69 flatcamTools/ToolSolderPaste.py:70
msgid "Tools Table"
msgstr "Tools Table"

#: flatcamEditors/FlatCAMExcEditor.py:807 flatcamGUI/ObjectUI.py:538
msgid ""
"Tools in this Excellon object\n"
"when are used for drilling."
msgstr ""
"Tools in this Excellon object\n"
"when are used for drilling."

#: flatcamEditors/FlatCAMExcEditor.py:827
msgid "Add/Delete Tool"
msgstr "Add/Delete Tool"

#: flatcamEditors/FlatCAMExcEditor.py:829
msgid ""
"Add/Delete a tool to the tool list\n"
"for this Excellon object."
msgstr ""
"Add/Delete a tool to the tool list\n"
"for this Excellon object."

#: flatcamEditors/FlatCAMExcEditor.py:837 flatcamTools/ToolCutOut.py:77
msgid "Tool Dia:"
msgstr "Tool Dia:"

#: flatcamEditors/FlatCAMExcEditor.py:839 flatcamGUI/FlatCAMGUI.py:5055
#: flatcamGUI/ObjectUI.py:978
msgid "Diameter for the new tool"
msgstr "Diameter for the new tool"

#: flatcamEditors/FlatCAMExcEditor.py:847
msgid "Add Tool"
msgstr "Add Tool"

#: flatcamEditors/FlatCAMExcEditor.py:849
msgid ""
"Add a new tool to the tool list\n"
"with the diameter specified above."
msgstr ""
"Add a new tool to the tool list\n"
"with the diameter specified above."

#: flatcamEditors/FlatCAMExcEditor.py:861
msgid "Delete Tool"
msgstr "Delete Tool"

#: flatcamEditors/FlatCAMExcEditor.py:863
msgid ""
"Delete a tool in the tool list\n"
"by selecting a row in the tool table."
msgstr ""
"Delete a tool in the tool list\n"
"by selecting a row in the tool table."

#: flatcamEditors/FlatCAMExcEditor.py:881
msgid "Resize Drill(s)"
msgstr "Resize Drill(s)"

#: flatcamEditors/FlatCAMExcEditor.py:883
msgid "Resize a drill or a selection of drills."
msgstr "Resize a drill or a selection of drills."

#: flatcamEditors/FlatCAMExcEditor.py:890
msgid "Resize Dia:"
msgstr "Resize Dia:"

#: flatcamEditors/FlatCAMExcEditor.py:892
msgid "Diameter to resize to."
msgstr "Diameter to resize to."

#: flatcamEditors/FlatCAMExcEditor.py:900
msgid "Resize"
msgstr "Resize"

#: flatcamEditors/FlatCAMExcEditor.py:902
msgid "Resize drill(s)"
msgstr "Resize drill(s)"

#: flatcamEditors/FlatCAMExcEditor.py:924 flatcamGUI/FlatCAMGUI.py:1612
msgid "Add Drill Array"
msgstr "Add Drill Array"

#: flatcamEditors/FlatCAMExcEditor.py:926
msgid "Add an array of drills (linear or circular array)"
msgstr "Add an array of drills (linear or circular array)"

#: flatcamEditors/FlatCAMExcEditor.py:932
msgid ""
"Select the type of drills array to create.\n"
"It can be Linear X(Y) or Circular"
msgstr ""
"Select the type of drills array to create.\n"
"It can be Linear X(Y) or Circular"

#: flatcamEditors/FlatCAMExcEditor.py:935
#: flatcamEditors/FlatCAMGrbEditor.py:2499
msgid "Linear"
msgstr "Linear"

#: flatcamEditors/FlatCAMExcEditor.py:936
#: flatcamEditors/FlatCAMGrbEditor.py:2500
msgid "Circular"
msgstr "Circular"

#: flatcamEditors/FlatCAMExcEditor.py:944 flatcamGUI/FlatCAMGUI.py:5065
msgid "Nr of drills:"
msgstr "Nr of drills:"

#: flatcamEditors/FlatCAMExcEditor.py:946 flatcamGUI/FlatCAMGUI.py:5067
msgid "Specify how many drills to be in the array."
msgstr "Specify how many drills to be in the array."

#: flatcamEditors/FlatCAMExcEditor.py:964
#: flatcamEditors/FlatCAMExcEditor.py:1010
#: flatcamEditors/FlatCAMGrbEditor.py:2526
#: flatcamEditors/FlatCAMGrbEditor.py:2571
msgid "Direction:"
msgstr "Direction:"

#: flatcamEditors/FlatCAMExcEditor.py:966
#: flatcamEditors/FlatCAMGrbEditor.py:2528 flatcamGUI/FlatCAMGUI.py:5082
msgid ""
"Direction on which the linear array is oriented:\n"
"- 'X' - horizontal axis \n"
"- 'Y' - vertical axis or \n"
"- 'Angle' - a custom angle for the array inclination"
msgstr ""
"Direction on which the linear array is oriented:\n"
"- 'X' - horizontal axis \n"
"- 'Y' - vertical axis or \n"
"- 'Angle' - a custom angle for the array inclination"

#: flatcamEditors/FlatCAMExcEditor.py:979
#: flatcamEditors/FlatCAMGrbEditor.py:2541 flatcamGUI/FlatCAMGUI.py:5096
msgid "Pitch:"
msgstr "Pitch:"

#: flatcamEditors/FlatCAMExcEditor.py:981
#: flatcamEditors/FlatCAMGrbEditor.py:2543 flatcamGUI/FlatCAMGUI.py:5098
msgid "Pitch = Distance between elements of the array."
msgstr "Pitch = Distance between elements of the array."

#: flatcamEditors/FlatCAMExcEditor.py:989
#: flatcamEditors/FlatCAMExcEditor.py:1024
#: flatcamEditors/FlatCAMGeoEditor.py:665
#: flatcamEditors/FlatCAMGrbEditor.py:2550
#: flatcamEditors/FlatCAMGrbEditor.py:2586
#: flatcamEditors/FlatCAMGrbEditor.py:4580 flatcamGUI/FlatCAMGUI.py:5107
#: flatcamTools/ToolTransform.py:68
msgid "Angle:"
msgstr "Angle:"

#: flatcamEditors/FlatCAMExcEditor.py:991
#: flatcamEditors/FlatCAMGrbEditor.py:2552
msgid ""
"Angle at which the linear array is placed.\n"
"The precision is of max 2 decimals.\n"
"Min value is: -359.99 degrees.\n"
"Max value is:  360.00 degrees."
msgstr ""
"Angle at which the linear array is placed.\n"
"The precision is of max 2 decimals.\n"
"Min value is: -359.99 degrees.\n"
"Max value is:  360.00 degrees."

#: flatcamEditors/FlatCAMExcEditor.py:1012
#: flatcamEditors/FlatCAMGrbEditor.py:2573
msgid ""
"Direction for circular array.Can be CW = clockwise or CCW = counter "
"clockwise."
msgstr ""
"Direction for circular array.Can be CW = clockwise or CCW = counter "
"clockwise."

#: flatcamEditors/FlatCAMExcEditor.py:1026
#: flatcamEditors/FlatCAMGrbEditor.py:2588 flatcamGUI/FlatCAMGUI.py:5109
#: flatcamGUI/FlatCAMGUI.py:5135
msgid "Angle at which each element in circular array is placed."
msgstr "Angle at which each element in circular array is placed."

#: flatcamEditors/FlatCAMExcEditor.py:1487
msgid ""
"[WARNING_NOTCL] Tool already in the original or actual tool list.\n"
"Save and reedit Excellon if you need to add this tool. "
msgstr ""
"[WARNING_NOTCL] Tool already in the original or actual tool list.\n"
"Save and reedit Excellon if you need to add this tool. "

#: flatcamEditors/FlatCAMExcEditor.py:1496 flatcamGUI/FlatCAMGUI.py:2997
#, python-brace-format
msgid "[success] Added new tool with dia: {dia} {units}"
msgstr "[success] Added new tool with dia: {dia} {units}"

#: flatcamEditors/FlatCAMExcEditor.py:1528
msgid "[WARNING_NOTCL] Select a tool in Tool Table"
msgstr "[WARNING_NOTCL] Select a tool in Tool Table"

#: flatcamEditors/FlatCAMExcEditor.py:1560
#, python-brace-format
msgid "[success] Deleted tool with dia: {del_dia} {units}"
msgstr "[success] Deleted tool with dia: {del_dia} {units}"

#: flatcamEditors/FlatCAMExcEditor.py:2074
msgid ""
"[ERROR_NOTCL] There are no Tools definitions in the file. Aborting Excellon "
"creation."
msgstr ""
"[ERROR_NOTCL] There are no Tools definitions in the file. Aborting Excellon "
"creation."

#: flatcamEditors/FlatCAMExcEditor.py:2083
msgid "Creating Excellon."
msgstr "Creating Excellon."

#: flatcamEditors/FlatCAMExcEditor.py:2092
msgid "[success] Excellon editing finished."
msgstr "[success] Excellon editing finished."

#: flatcamEditors/FlatCAMExcEditor.py:2109
msgid "[WARNING_NOTCL] Cancelled. There is no Tool/Drill selected"
msgstr "[WARNING_NOTCL] Cancelled. There is no Tool/Drill selected"

#: flatcamEditors/FlatCAMExcEditor.py:2637
msgid "[success] Done. Drill(s) deleted."
msgstr "[success] Done. Drill(s) deleted."

#: flatcamEditors/FlatCAMExcEditor.py:2705
#: flatcamEditors/FlatCAMGrbEditor.py:4340
msgid "Click on the circular array Center position"
msgstr "Click on the circular array Center position"

#: flatcamEditors/FlatCAMGeoEditor.py:80
#: flatcamEditors/FlatCAMGrbEditor.py:2416
msgid "Buffer distance:"
msgstr "Buffer distance:"

#: flatcamEditors/FlatCAMGeoEditor.py:81
#: flatcamEditors/FlatCAMGrbEditor.py:2417
msgid "Buffer corner:"
msgstr "Buffer corner:"

#: flatcamEditors/FlatCAMGeoEditor.py:83
msgid ""
"There are 3 types of corners:\n"
" - 'Round': the corner is rounded for exterior buffer.\n"
" - 'Square:' the corner is met in a sharp angle for exterior buffer.\n"
" - 'Beveled:' the corner is a line that directly connects the features "
"meeting in the corner"
msgstr ""
"There are 3 types of corners:\n"
" - 'Round': the corner is rounded for exterior buffer.\n"
" - 'Square:' the corner is met in a sharp angle for exterior buffer.\n"
" - 'Beveled:' the corner is a line that directly connects the features "
"meeting in the corner"

#: flatcamEditors/FlatCAMGeoEditor.py:89
#: flatcamEditors/FlatCAMGrbEditor.py:2425
msgid "Round"
msgstr "Round"

#: flatcamEditors/FlatCAMGeoEditor.py:90
#: flatcamEditors/FlatCAMGrbEditor.py:2426
msgid "Square"
msgstr "Square"

#: flatcamEditors/FlatCAMGeoEditor.py:91
#: flatcamEditors/FlatCAMGrbEditor.py:2427
msgid "Beveled"
msgstr "Beveled"

#: flatcamEditors/FlatCAMGeoEditor.py:98
msgid "Buffer Interior"
msgstr "Buffer Interior"

#: flatcamEditors/FlatCAMGeoEditor.py:100
msgid "Buffer Exterior"
msgstr "Buffer Exterior"

#: flatcamEditors/FlatCAMGeoEditor.py:106
msgid "Full Buffer"
msgstr "Full Buffer"

#: flatcamEditors/FlatCAMGeoEditor.py:127
#: flatcamEditors/FlatCAMGeoEditor.py:2682
msgid "Buffer Tool"
msgstr "Buffer Tool"

#: flatcamEditors/FlatCAMGeoEditor.py:138
#: flatcamEditors/FlatCAMGeoEditor.py:155
#: flatcamEditors/FlatCAMGeoEditor.py:172
#: flatcamEditors/FlatCAMGeoEditor.py:2700
#: flatcamEditors/FlatCAMGeoEditor.py:2726
#: flatcamEditors/FlatCAMGeoEditor.py:2752
#: flatcamEditors/FlatCAMGrbEditor.py:4392
msgid ""
"[WARNING_NOTCL] Buffer distance value is missing or wrong format. Add it and "
"retry."
msgstr ""
"[WARNING_NOTCL] Buffer distance value is missing or wrong format. Add it and "
"retry."

#: flatcamEditors/FlatCAMGeoEditor.py:343
msgid "Text Tool"
msgstr "Text Tool"

#: flatcamEditors/FlatCAMGeoEditor.py:401 flatcamGUI/FlatCAMGUI.py:803
msgid "Tool"
msgstr "Tool"

#: flatcamEditors/FlatCAMGeoEditor.py:432 flatcamGUI/FlatCAMGUI.py:4054
#: flatcamGUI/FlatCAMGUI.py:5618 flatcamGUI/FlatCAMGUI.py:5895
#: flatcamGUI/FlatCAMGUI.py:6035 flatcamGUI/ObjectUI.py:260
msgid "Tool dia:"
msgstr "Tool dia:"

#: flatcamEditors/FlatCAMGeoEditor.py:434 flatcamGUI/FlatCAMGUI.py:6037
msgid ""
"Diameter of the tool to\n"
"be used in the operation."
msgstr ""
"Diameter of the tool to\n"
"be used in the operation."

#: flatcamEditors/FlatCAMGeoEditor.py:443 flatcamGUI/FlatCAMGUI.py:5801
#: flatcamGUI/FlatCAMGUI.py:6046 flatcamTools/ToolNonCopperClear.py:165
#: flatcamTools/ToolPaint.py:160
msgid "Overlap Rate:"
msgstr "Overlap Rate:"

#: flatcamEditors/FlatCAMGeoEditor.py:445 flatcamTools/ToolPaint.py:162
#, python-format
msgid ""
"How much (fraction) of the tool width to overlap each tool pass.\n"
"Example:\n"
"A value here of 0.25 means 25% from the tool diameter found above.\n"
"\n"
"Adjust the value starting with lower values\n"
"and increasing it if areas that should be painted are still \n"
"not painted.\n"
"Lower values = faster processing, faster execution on PCB.\n"
"Higher values = slow processing and slow execution on CNC\n"
"due of too many paths."
msgstr ""
"How much (fraction) of the tool width to overlap each tool pass.\n"
"Example:\n"
"A value here of 0.25 means 25% from the tool diameter found above.\n"
"\n"
"Adjust the value starting with lower values\n"
"and increasing it if areas that should be painted are still \n"
"not painted.\n"
"Lower values = faster processing, faster execution on PCB.\n"
"Higher values = slow processing and slow execution on CNC\n"
"due of too many paths."

#: flatcamEditors/FlatCAMGeoEditor.py:461 flatcamGUI/FlatCAMGUI.py:5817
#: flatcamGUI/FlatCAMGUI.py:5903 flatcamGUI/FlatCAMGUI.py:6056
#: flatcamTools/ToolCutOut.py:86 flatcamTools/ToolNonCopperClear.py:181
#: flatcamTools/ToolPaint.py:177
msgid "Margin:"
msgstr "Margin:"

#: flatcamEditors/FlatCAMGeoEditor.py:463 flatcamGUI/FlatCAMGUI.py:6058
#: flatcamTools/ToolPaint.py:179
msgid ""
"Distance by which to avoid\n"
"the edges of the polygon to\n"
"be painted."
msgstr ""
"Distance by which to avoid\n"
"the edges of the polygon to\n"
"be painted."

#: flatcamEditors/FlatCAMGeoEditor.py:472 flatcamGUI/FlatCAMGUI.py:5826
#: flatcamGUI/FlatCAMGUI.py:6067 flatcamTools/ToolNonCopperClear.py:190
#: flatcamTools/ToolPaint.py:188
msgid "Method:"
msgstr "Method:"

#: flatcamEditors/FlatCAMGeoEditor.py:474 flatcamGUI/FlatCAMGUI.py:6069
msgid ""
"Algorithm to paint the polygon:<BR><B>Standard</B>: Fixed step inwards."
"<BR><B>Seed-based</B>: Outwards from seed."
msgstr ""
"Algorithm to paint the polygon:<BR><B>Standard</B>: Fixed step inwards."
"<BR><B>Seed-based</B>: Outwards from seed."

#: flatcamEditors/FlatCAMGeoEditor.py:487 flatcamGUI/FlatCAMGUI.py:5842
#: flatcamGUI/FlatCAMGUI.py:6082 flatcamTools/ToolNonCopperClear.py:206
#: flatcamTools/ToolPaint.py:204
msgid "Connect:"
msgstr "Connect:"

#: flatcamEditors/FlatCAMGeoEditor.py:489 flatcamGUI/FlatCAMGUI.py:5844
#: flatcamGUI/FlatCAMGUI.py:6084 flatcamTools/ToolNonCopperClear.py:208
#: flatcamTools/ToolPaint.py:206
msgid ""
"Draw lines between resulting\n"
"segments to minimize tool lifts."
msgstr ""
"Draw lines between resulting\n"
"segments to minimize tool lifts."

#: flatcamEditors/FlatCAMGeoEditor.py:496 flatcamGUI/FlatCAMGUI.py:5851
#: flatcamGUI/FlatCAMGUI.py:6092 flatcamTools/ToolNonCopperClear.py:215
#: flatcamTools/ToolPaint.py:213
msgid "Contour:"
msgstr "Contour:"

#: flatcamEditors/FlatCAMGeoEditor.py:498 flatcamGUI/FlatCAMGUI.py:5853
#: flatcamGUI/FlatCAMGUI.py:6094 flatcamTools/ToolNonCopperClear.py:217
#: flatcamTools/ToolPaint.py:215
msgid ""
"Cut around the perimeter of the polygon\n"
"to trim rough edges."
msgstr ""
"Cut around the perimeter of the polygon\n"
"to trim rough edges."

#: flatcamEditors/FlatCAMGeoEditor.py:509
msgid "Paint"
msgstr "Paint"

#: flatcamEditors/FlatCAMGeoEditor.py:527 flatcamGUI/FlatCAMGUI.py:643
#: flatcamGUI/FlatCAMGUI.py:1866 flatcamGUI/ObjectUI.py:1314
#: flatcamTools/ToolPaint.py:341
msgid "Paint Tool"
msgstr "Paint Tool"

#: flatcamEditors/FlatCAMGeoEditor.py:563
msgid "[WARNING_NOTCL] Paint cancelled. No shape selected."
msgstr "[WARNING_NOTCL] Paint cancelled. No shape selected."

#: flatcamEditors/FlatCAMGeoEditor.py:574 flatcamTools/ToolCutOut.py:355
#: flatcamTools/ToolCutOut.py:512 flatcamTools/ToolCutOut.py:651
#: flatcamTools/ToolCutOut.py:756 flatcamTools/ToolDblSided.py:363
msgid ""
"[WARNING_NOTCL] Tool diameter value is missing or wrong format. Add it and "
"retry."
msgstr ""
"[WARNING_NOTCL] Tool diameter value is missing or wrong format. Add it and "
"retry."

#: flatcamEditors/FlatCAMGeoEditor.py:585
msgid ""
"[WARNING_NOTCL] Overlap value is missing or wrong format. Add it and retry."
msgstr ""
"[WARNING_NOTCL] Overlap value is missing or wrong format. Add it and retry."

#: flatcamEditors/FlatCAMGeoEditor.py:597
msgid ""
"[WARNING_NOTCL] Margin distance value is missing or wrong format. Add it and "
"retry."
msgstr ""
"[WARNING_NOTCL] Margin distance value is missing or wrong format. Add it and "
"retry."

#: flatcamEditors/FlatCAMGeoEditor.py:606
#: flatcamEditors/FlatCAMGeoEditor.py:2707
#: flatcamEditors/FlatCAMGeoEditor.py:2733
#: flatcamEditors/FlatCAMGeoEditor.py:2759
#: flatcamTools/ToolNonCopperClear.py:813 flatcamTools/ToolProperties.py:104
msgid "Tools"
msgstr "Tools"

#: flatcamEditors/FlatCAMGeoEditor.py:617
#: flatcamEditors/FlatCAMGeoEditor.py:990
#: flatcamEditors/FlatCAMGrbEditor.py:4531
#: flatcamEditors/FlatCAMGrbEditor.py:4916 flatcamGUI/FlatCAMGUI.py:654
#: flatcamGUI/FlatCAMGUI.py:1879 flatcamTools/ToolTransform.py:398
msgid "Transform Tool"
msgstr "Transform Tool"

#: flatcamEditors/FlatCAMGeoEditor.py:618
#: flatcamEditors/FlatCAMGeoEditor.py:679
#: flatcamEditors/FlatCAMGrbEditor.py:4532
#: flatcamEditors/FlatCAMGrbEditor.py:4594 flatcamTools/ToolTransform.py:24
#: flatcamTools/ToolTransform.py:82
msgid "Rotate"
msgstr "Rotate"

#: flatcamEditors/FlatCAMGeoEditor.py:619
#: flatcamEditors/FlatCAMGrbEditor.py:4533 flatcamTools/ToolTransform.py:25
msgid "Skew/Shear"
msgstr "Skew/Shear"

#: flatcamEditors/FlatCAMGeoEditor.py:620
#: flatcamEditors/FlatCAMGrbEditor.py:2471
#: flatcamEditors/FlatCAMGrbEditor.py:4534 flatcamGUI/FlatCAMGUI.py:718
#: flatcamGUI/FlatCAMGUI.py:1947 flatcamGUI/ObjectUI.py:100
#: flatcamTools/ToolTransform.py:26
msgid "Scale"
msgstr "Scale"

#: flatcamEditors/FlatCAMGeoEditor.py:621
#: flatcamEditors/FlatCAMGrbEditor.py:4535 flatcamTools/ToolTransform.py:27
msgid "Mirror (Flip)"
msgstr "Mirror (Flip)"

#: flatcamEditors/FlatCAMGeoEditor.py:622
#: flatcamEditors/FlatCAMGrbEditor.py:4536 flatcamGUI/ObjectUI.py:127
#: flatcamGUI/ObjectUI.py:891 flatcamGUI/ObjectUI.py:1465
#: flatcamTools/ToolTransform.py:28
msgid "Offset"
msgstr "Offset"

#: flatcamEditors/FlatCAMGeoEditor.py:633
#: flatcamEditors/FlatCAMGrbEditor.py:4548
#, python-format
msgid "Editor %s"
msgstr "Editor %s"

#: flatcamEditors/FlatCAMGeoEditor.py:667
#: flatcamEditors/FlatCAMGrbEditor.py:4582 flatcamTools/ToolTransform.py:70
msgid ""
"Angle for Rotation action, in degrees.\n"
"Float number between -360 and 359.\n"
"Positive numbers for CW motion.\n"
"Negative numbers for CCW motion."
msgstr ""
"Angle for Rotation action, in degrees.\n"
"Float number between -360 and 359.\n"
"Positive numbers for CW motion.\n"
"Negative numbers for CCW motion."

#: flatcamEditors/FlatCAMGeoEditor.py:681
#: flatcamEditors/FlatCAMGrbEditor.py:4596
msgid ""
"Rotate the selected shape(s).\n"
"The point of reference is the middle of\n"
"the bounding box for all selected shapes."
msgstr ""
"Rotate the selected shape(s).\n"
"The point of reference is the middle of\n"
"the bounding box for all selected shapes."

#: flatcamEditors/FlatCAMGeoEditor.py:704
#: flatcamEditors/FlatCAMGrbEditor.py:4619 flatcamTools/ToolTransform.py:107
msgid "Angle X:"
msgstr "Angle X:"

#: flatcamEditors/FlatCAMGeoEditor.py:706
#: flatcamEditors/FlatCAMGeoEditor.py:724
#: flatcamEditors/FlatCAMGrbEditor.py:4621
#: flatcamEditors/FlatCAMGrbEditor.py:4639 flatcamTools/ToolTransform.py:109
#: flatcamTools/ToolTransform.py:127
msgid ""
"Angle for Skew action, in degrees.\n"
"Float number between -360 and 359."
msgstr ""
"Angle for Skew action, in degrees.\n"
"Float number between -360 and 359."

#: flatcamEditors/FlatCAMGeoEditor.py:715
#: flatcamEditors/FlatCAMGrbEditor.py:4630 flatcamTools/ToolTransform.py:118
msgid "Skew X"
msgstr "Skew X"

#: flatcamEditors/FlatCAMGeoEditor.py:717
#: flatcamEditors/FlatCAMGeoEditor.py:735
#: flatcamEditors/FlatCAMGrbEditor.py:4632
#: flatcamEditors/FlatCAMGrbEditor.py:4650
msgid ""
"Skew/shear the selected shape(s).\n"
"The point of reference is the middle of\n"
"the bounding box for all selected shapes."
msgstr ""
"Skew/shear the selected shape(s).\n"
"The point of reference is the middle of\n"
"the bounding box for all selected shapes."

#: flatcamEditors/FlatCAMGeoEditor.py:722
#: flatcamEditors/FlatCAMGrbEditor.py:4637 flatcamTools/ToolTransform.py:125
msgid "Angle Y:"
msgstr "Angle Y:"

#: flatcamEditors/FlatCAMGeoEditor.py:733
#: flatcamEditors/FlatCAMGrbEditor.py:4648 flatcamTools/ToolTransform.py:136
msgid "Skew Y"
msgstr "Skew Y"

#: flatcamEditors/FlatCAMGeoEditor.py:761
#: flatcamEditors/FlatCAMGrbEditor.py:4676 flatcamTools/ToolTransform.py:164
msgid "Factor X:"
msgstr "Factor X:"

#: flatcamEditors/FlatCAMGeoEditor.py:763
#: flatcamEditors/FlatCAMGrbEditor.py:4678 flatcamTools/ToolTransform.py:166
msgid "Factor for Scale action over X axis."
msgstr "Factor for Scale action over X axis."

#: flatcamEditors/FlatCAMGeoEditor.py:771
#: flatcamEditors/FlatCAMGrbEditor.py:4686 flatcamTools/ToolTransform.py:174
msgid "Scale X"
msgstr "Scale X"

#: flatcamEditors/FlatCAMGeoEditor.py:773
#: flatcamEditors/FlatCAMGeoEditor.py:790
#: flatcamEditors/FlatCAMGrbEditor.py:4688
#: flatcamEditors/FlatCAMGrbEditor.py:4705
msgid ""
"Scale the selected shape(s).\n"
"The point of reference depends on \n"
"the Scale reference checkbox state."
msgstr ""
"Scale the selected shape(s).\n"
"The point of reference depends on \n"
"the Scale reference checkbox state."

#: flatcamEditors/FlatCAMGeoEditor.py:778
#: flatcamEditors/FlatCAMGrbEditor.py:4693 flatcamTools/ToolTransform.py:181
msgid "Factor Y:"
msgstr "Factor Y:"

#: flatcamEditors/FlatCAMGeoEditor.py:780
#: flatcamEditors/FlatCAMGrbEditor.py:4695 flatcamTools/ToolTransform.py:183
msgid "Factor for Scale action over Y axis."
msgstr "Factor for Scale action over Y axis."

#: flatcamEditors/FlatCAMGeoEditor.py:788
#: flatcamEditors/FlatCAMGrbEditor.py:4703 flatcamTools/ToolTransform.py:191
msgid "Scale Y"
msgstr "Scale Y"

#: flatcamEditors/FlatCAMGeoEditor.py:797
#: flatcamEditors/FlatCAMGrbEditor.py:4712 flatcamGUI/FlatCAMGUI.py:6441
#: flatcamTools/ToolTransform.py:200
msgid "Link"
msgstr "Link"

#: flatcamEditors/FlatCAMGeoEditor.py:799
#: flatcamEditors/FlatCAMGrbEditor.py:4714
msgid ""
"Scale the selected shape(s)\n"
"using the Scale Factor X for both axis."
msgstr ""
"Scale the selected shape(s)\n"
"using the Scale Factor X for both axis."

#: flatcamEditors/FlatCAMGeoEditor.py:805
#: flatcamEditors/FlatCAMGrbEditor.py:4720 flatcamGUI/FlatCAMGUI.py:6449
#: flatcamTools/ToolTransform.py:208
msgid "Scale Reference"
msgstr "Scale Reference"

#: flatcamEditors/FlatCAMGeoEditor.py:807
#: flatcamEditors/FlatCAMGrbEditor.py:4722
msgid ""
"Scale the selected shape(s)\n"
"using the origin reference when checked,\n"
"and the center of the biggest bounding box\n"
"of the selected shapes when unchecked."
msgstr ""
"Scale the selected shape(s)\n"
"using the origin reference when checked,\n"
"and the center of the biggest bounding box\n"
"of the selected shapes when unchecked."

#: flatcamEditors/FlatCAMGeoEditor.py:835
#: flatcamEditors/FlatCAMGrbEditor.py:4751 flatcamTools/ToolTransform.py:238
msgid "Value X:"
msgstr "Value X:"

#: flatcamEditors/FlatCAMGeoEditor.py:837
#: flatcamEditors/FlatCAMGrbEditor.py:4753 flatcamTools/ToolTransform.py:240
msgid "Value for Offset action on X axis."
msgstr "Value for Offset action on X axis."

#: flatcamEditors/FlatCAMGeoEditor.py:845
#: flatcamEditors/FlatCAMGrbEditor.py:4761 flatcamTools/ToolTransform.py:248
msgid "Offset X"
msgstr "Offset X"

#: flatcamEditors/FlatCAMGeoEditor.py:847
#: flatcamEditors/FlatCAMGeoEditor.py:865
#: flatcamEditors/FlatCAMGrbEditor.py:4763
#: flatcamEditors/FlatCAMGrbEditor.py:4781
msgid ""
"Offset the selected shape(s).\n"
"The point of reference is the middle of\n"
"the bounding box for all selected shapes.\n"
msgstr ""
"Offset the selected shape(s).\n"
"The point of reference is the middle of\n"
"the bounding box for all selected shapes.\n"

#: flatcamEditors/FlatCAMGeoEditor.py:853
#: flatcamEditors/FlatCAMGrbEditor.py:4769 flatcamTools/ToolTransform.py:255
msgid "Value Y:"
msgstr "Value Y:"

#: flatcamEditors/FlatCAMGeoEditor.py:855
#: flatcamEditors/FlatCAMGrbEditor.py:4771 flatcamTools/ToolTransform.py:257
msgid "Value for Offset action on Y axis."
msgstr "Value for Offset action on Y axis."

#: flatcamEditors/FlatCAMGeoEditor.py:863
#: flatcamEditors/FlatCAMGrbEditor.py:4779 flatcamTools/ToolTransform.py:265
msgid "Offset Y"
msgstr "Offset Y"

#: flatcamEditors/FlatCAMGeoEditor.py:894
#: flatcamEditors/FlatCAMGrbEditor.py:4810 flatcamTools/ToolTransform.py:295
msgid "Flip on X"
msgstr "Flip on X"

#: flatcamEditors/FlatCAMGeoEditor.py:896
#: flatcamEditors/FlatCAMGeoEditor.py:904
#: flatcamEditors/FlatCAMGrbEditor.py:4812
#: flatcamEditors/FlatCAMGrbEditor.py:4820
msgid ""
"Flip the selected shape(s) over the X axis.\n"
"Does not create a new shape."
msgstr ""
"Flip the selected shape(s) over the X axis.\n"
"Does not create a new shape."

#: flatcamEditors/FlatCAMGeoEditor.py:902
#: flatcamEditors/FlatCAMGrbEditor.py:4818 flatcamTools/ToolTransform.py:303
msgid "Flip on Y"
msgstr "Flip on Y"

#: flatcamEditors/FlatCAMGeoEditor.py:911
#: flatcamEditors/FlatCAMGrbEditor.py:4827 flatcamTools/ToolTransform.py:312
msgid "Ref Pt"
msgstr "Ref Pt"

#: flatcamEditors/FlatCAMGeoEditor.py:913
#: flatcamEditors/FlatCAMGrbEditor.py:4829
msgid ""
"Flip the selected shape(s)\n"
"around the point in Point Entry Field.\n"
"\n"
"The point coordinates can be captured by\n"
"left click on canvas together with pressing\n"
"SHIFT key. \n"
"Then click Add button to insert coordinates.\n"
"Or enter the coords in format (x, y) in the\n"
"Point Entry field and click Flip on X(Y)"
msgstr ""
"Flip the selected shape(s)\n"
"around the point in Point Entry Field.\n"
"\n"
"The point coordinates can be captured by\n"
"left click on canvas together with pressing\n"
"SHIFT key. \n"
"Then click Add button to insert coordinates.\n"
"Or enter the coords in format (x, y) in the\n"
"Point Entry field and click Flip on X(Y)"

#: flatcamEditors/FlatCAMGeoEditor.py:925
#: flatcamEditors/FlatCAMGrbEditor.py:4841 flatcamTools/ToolTransform.py:325
msgid "Point:"
msgstr "Point:"

#: flatcamEditors/FlatCAMGeoEditor.py:927
#: flatcamEditors/FlatCAMGrbEditor.py:4843
msgid ""
"Coordinates in format (x, y) used as reference for mirroring.\n"
"The 'x' in (x, y) will be used when using Flip on X and\n"
"the 'y' in (x, y) will be used when using Flip on Y."
msgstr ""
"Coordinates in format (x, y) used as reference for mirroring.\n"
"The 'x' in (x, y) will be used when using Flip on X and\n"
"the 'y' in (x, y) will be used when using Flip on Y."

#: flatcamEditors/FlatCAMGeoEditor.py:939
#: flatcamEditors/FlatCAMGrbEditor.py:4855 flatcamTools/ToolTransform.py:339
msgid ""
"The point coordinates can be captured by\n"
"left click on canvas together with pressing\n"
"SHIFT key. Then click Add button to insert."
msgstr ""
"The point coordinates can be captured by\n"
"left click on canvas together with pressing\n"
"SHIFT key. Then click Add button to insert."

#: flatcamEditors/FlatCAMGeoEditor.py:1054
#: flatcamEditors/FlatCAMGrbEditor.py:4980
msgid "[WARNING_NOTCL] Transformation cancelled. No shape selected."
msgstr "[WARNING_NOTCL] Transformation cancelled. No shape selected."

#: flatcamEditors/FlatCAMGeoEditor.py:1075
#: flatcamEditors/FlatCAMGrbEditor.py:5000 flatcamTools/ToolTransform.py:468
msgid "[ERROR_NOTCL] Wrong value format entered for Rotate, use a number."
msgstr "[ERROR_NOTCL] Wrong value format entered for Rotate, use a number."

#: flatcamEditors/FlatCAMGeoEditor.py:1112
#: flatcamEditors/FlatCAMGrbEditor.py:5043 flatcamTools/ToolTransform.py:502
msgid "[ERROR_NOTCL] Wrong value format entered for Skew X, use a number."
msgstr "[ERROR_NOTCL] Wrong value format entered for Skew X, use a number."

#: flatcamEditors/FlatCAMGeoEditor.py:1133
#: flatcamEditors/FlatCAMGrbEditor.py:5070 flatcamTools/ToolTransform.py:520
msgid "[ERROR_NOTCL] Wrong value format entered for Skew Y, use a number."
msgstr "[ERROR_NOTCL] Wrong value format entered for Skew Y, use a number."

#: flatcamEditors/FlatCAMGeoEditor.py:1154
#: flatcamEditors/FlatCAMGrbEditor.py:5097 flatcamTools/ToolTransform.py:538
msgid "[ERROR_NOTCL] Wrong value format entered for Scale X, use a number."
msgstr "[ERROR_NOTCL] Wrong value format entered for Scale X, use a number."

#: flatcamEditors/FlatCAMGeoEditor.py:1191
#: flatcamEditors/FlatCAMGrbEditor.py:5138 flatcamTools/ToolTransform.py:572
msgid "[ERROR_NOTCL] Wrong value format entered for Scale Y, use a number."
msgstr "[ERROR_NOTCL] Wrong value format entered for Scale Y, use a number."

#: flatcamEditors/FlatCAMGeoEditor.py:1223
#: flatcamEditors/FlatCAMGrbEditor.py:5176 flatcamTools/ToolTransform.py:601
msgid "[ERROR_NOTCL] Wrong value format entered for Offset X, use a number."
msgstr "[ERROR_NOTCL] Wrong value format entered for Offset X, use a number."

#: flatcamEditors/FlatCAMGeoEditor.py:1244
#: flatcamEditors/FlatCAMGrbEditor.py:5202 flatcamTools/ToolTransform.py:619
msgid "[ERROR_NOTCL] Wrong value format entered for Offset Y, use a number."
msgstr "[ERROR_NOTCL] Wrong value format entered for Offset Y, use a number."

#: flatcamEditors/FlatCAMGeoEditor.py:1262
#: flatcamEditors/FlatCAMGrbEditor.py:5225
msgid "[WARNING_NOTCL] No shape selected. Please Select a shape to rotate!"
msgstr "[WARNING_NOTCL] No shape selected. Please Select a shape to rotate!"

#: flatcamEditors/FlatCAMGeoEditor.py:1265
#: flatcamEditors/FlatCAMGrbEditor.py:5228 flatcamTools/ToolTransform.py:640
msgid "Appying Rotate"
msgstr "Appying Rotate"

#: flatcamEditors/FlatCAMGeoEditor.py:1293
#: flatcamEditors/FlatCAMGrbEditor.py:5259
msgid "[success] Done. Rotate completed."
msgstr "[success] Done. Rotate completed."

#: flatcamEditors/FlatCAMGeoEditor.py:1309
#: flatcamEditors/FlatCAMGrbEditor.py:5278
msgid "[WARNING_NOTCL] No shape selected. Please Select a shape to flip!"
msgstr "[WARNING_NOTCL] No shape selected. Please Select a shape to flip!"

#: flatcamEditors/FlatCAMGeoEditor.py:1312
#: flatcamEditors/FlatCAMGrbEditor.py:5281 flatcamTools/ToolTransform.py:691
msgid "Applying Flip"
msgstr "Applying Flip"

#: flatcamEditors/FlatCAMGeoEditor.py:1342
#: flatcamEditors/FlatCAMGrbEditor.py:5318 flatcamTools/ToolTransform.py:733
msgid "[success] Flip on the Y axis done ..."
msgstr "[success] Flip on the Y axis done ..."

#: flatcamEditors/FlatCAMGeoEditor.py:1345
#: flatcamEditors/FlatCAMGrbEditor.py:5326 flatcamTools/ToolTransform.py:742
msgid "[success] Flip on the X axis done ..."
msgstr "[success] Flip on the X axis done ..."

#: flatcamEditors/FlatCAMGeoEditor.py:1364
#: flatcamEditors/FlatCAMGrbEditor.py:5346
msgid "[WARNING_NOTCL] No shape selected. Please Select a shape to shear/skew!"
msgstr ""
"[WARNING_NOTCL] No shape selected. Please Select a shape to shear/skew!"

#: flatcamEditors/FlatCAMGeoEditor.py:1367
#: flatcamEditors/FlatCAMGrbEditor.py:5349 flatcamTools/ToolTransform.py:760
msgid "Applying Skew"
msgstr "Applying Skew"

#: flatcamEditors/FlatCAMGeoEditor.py:1392
#: flatcamEditors/FlatCAMGrbEditor.py:5382 flatcamTools/ToolTransform.py:791
#, python-format
msgid "[success] Skew on the %s axis done ..."
msgstr "[success] Skew on the %s axis done ..."

#: flatcamEditors/FlatCAMGeoEditor.py:1396
#: flatcamEditors/FlatCAMGrbEditor.py:5386 flatcamTools/ToolTransform.py:795
#, python-format
msgid "[ERROR_NOTCL] Due of %s, Skew action was not executed."
msgstr "[ERROR_NOTCL] Due of %s, Skew action was not executed."

#: flatcamEditors/FlatCAMGeoEditor.py:1407
#: flatcamEditors/FlatCAMGrbEditor.py:5405
msgid "[WARNING_NOTCL] No shape selected. Please Select a shape to scale!"
msgstr "[WARNING_NOTCL] No shape selected. Please Select a shape to scale!"

#: flatcamEditors/FlatCAMGeoEditor.py:1410
#: flatcamEditors/FlatCAMGrbEditor.py:5408 flatcamTools/ToolTransform.py:809
msgid "Applying Scale"
msgstr "Applying Scale"

#: flatcamEditors/FlatCAMGeoEditor.py:1443
#: flatcamEditors/FlatCAMGrbEditor.py:5444 flatcamTools/ToolTransform.py:848
#, python-format
msgid "[success] Scale on the %s axis done ..."
msgstr "[success] Scale on the %s axis done ..."

#: flatcamEditors/FlatCAMGeoEditor.py:1446
#: flatcamEditors/FlatCAMGrbEditor.py:5447 flatcamTools/ToolTransform.py:851
#, python-format
msgid "[ERROR_NOTCL] Due of %s, Scale action was not executed."
msgstr "[ERROR_NOTCL] Due of %s, Scale action was not executed."

#: flatcamEditors/FlatCAMGeoEditor.py:1455
#: flatcamEditors/FlatCAMGrbEditor.py:5460
msgid "[WARNING_NOTCL] No shape selected. Please Select a shape to offset!"
msgstr "[WARNING_NOTCL] No shape selected. Please Select a shape to offset!"

#: flatcamEditors/FlatCAMGeoEditor.py:1458
#: flatcamEditors/FlatCAMGrbEditor.py:5463 flatcamTools/ToolTransform.py:861
msgid "Applying Offset"
msgstr "Applying Offset"

#: flatcamEditors/FlatCAMGeoEditor.py:1469
#: flatcamEditors/FlatCAMGrbEditor.py:5484 flatcamTools/ToolTransform.py:880
#, python-format
msgid "[success] Offset on the %s axis done ..."
msgstr "[success] Offset on the %s axis done ..."

#: flatcamEditors/FlatCAMGeoEditor.py:1473
#: flatcamEditors/FlatCAMGrbEditor.py:5488 flatcamTools/ToolTransform.py:884
#, python-format
msgid "[ERROR_NOTCL] Due of %s, Offset action was not executed."
msgstr "[ERROR_NOTCL] Due of %s, Offset action was not executed."

#: flatcamEditors/FlatCAMGeoEditor.py:1477
#: flatcamEditors/FlatCAMGrbEditor.py:5492
msgid "Rotate ..."
msgstr "Rotate ..."

#: flatcamEditors/FlatCAMGeoEditor.py:1478
#: flatcamEditors/FlatCAMGeoEditor.py:1535
#: flatcamEditors/FlatCAMGeoEditor.py:1552
#: flatcamEditors/FlatCAMGrbEditor.py:5493
#: flatcamEditors/FlatCAMGrbEditor.py:5550
#: flatcamEditors/FlatCAMGrbEditor.py:5567
msgid "Enter an Angle Value (degrees):"
msgstr "Enter an Angle Value (degrees):"

#: flatcamEditors/FlatCAMGeoEditor.py:1487
#: flatcamEditors/FlatCAMGrbEditor.py:5502
msgid "[success] Geometry shape rotate done..."
msgstr "[success] Geometry shape rotate done..."

#: flatcamEditors/FlatCAMGeoEditor.py:1492
#: flatcamEditors/FlatCAMGrbEditor.py:5507
msgid "[WARNING_NOTCL] Geometry shape rotate cancelled..."
msgstr "[WARNING_NOTCL] Geometry shape rotate cancelled..."

#: flatcamEditors/FlatCAMGeoEditor.py:1498
#: flatcamEditors/FlatCAMGrbEditor.py:5513
msgid "Offset on X axis ..."
msgstr "Offset on X axis ..."

#: flatcamEditors/FlatCAMGeoEditor.py:1499
#: flatcamEditors/FlatCAMGeoEditor.py:1518
#: flatcamEditors/FlatCAMGrbEditor.py:5514
#: flatcamEditors/FlatCAMGrbEditor.py:5533
#, python-format
msgid "Enter a distance Value (%s):"
msgstr "Enter a distance Value (%s):"

#: flatcamEditors/FlatCAMGeoEditor.py:1508
#: flatcamEditors/FlatCAMGrbEditor.py:5523
msgid "[success] Geometry shape offset on X axis done..."
msgstr "[success] Geometry shape offset on X axis done..."

#: flatcamEditors/FlatCAMGeoEditor.py:1512
#: flatcamEditors/FlatCAMGrbEditor.py:5527
msgid "[WARNING_NOTCL] Geometry shape offset X cancelled..."
msgstr "[WARNING_NOTCL] Geometry shape offset X cancelled..."

#: flatcamEditors/FlatCAMGeoEditor.py:1517
#: flatcamEditors/FlatCAMGrbEditor.py:5532
msgid "Offset on Y axis ..."
msgstr "Offset on Y axis ..."

#: flatcamEditors/FlatCAMGeoEditor.py:1527
#: flatcamEditors/FlatCAMGrbEditor.py:5542
msgid "[success] Geometry shape offset on Y axis done..."
msgstr "[success] Geometry shape offset on Y axis done..."

#: flatcamEditors/FlatCAMGeoEditor.py:1531
#: flatcamEditors/FlatCAMGrbEditor.py:5546
msgid "[WARNING_NOTCL] Geometry shape offset Y cancelled..."
msgstr "[WARNING_NOTCL] Geometry shape offset Y cancelled..."

#: flatcamEditors/FlatCAMGeoEditor.py:1534
#: flatcamEditors/FlatCAMGrbEditor.py:5549
msgid "Skew on X axis ..."
msgstr "Skew on X axis ..."

#: flatcamEditors/FlatCAMGeoEditor.py:1544
#: flatcamEditors/FlatCAMGrbEditor.py:5559
msgid "[success] Geometry shape skew on X axis done..."
msgstr "[success] Geometry shape skew on X axis done..."

#: flatcamEditors/FlatCAMGeoEditor.py:1548
#: flatcamEditors/FlatCAMGrbEditor.py:5563
msgid "[WARNING_NOTCL] Geometry shape skew X cancelled..."
msgstr "[WARNING_NOTCL] Geometry shape skew X cancelled..."

#: flatcamEditors/FlatCAMGeoEditor.py:1551
#: flatcamEditors/FlatCAMGrbEditor.py:5566
msgid "Skew on Y axis ..."
msgstr "Skew on Y axis ..."

#: flatcamEditors/FlatCAMGeoEditor.py:1561
#: flatcamEditors/FlatCAMGrbEditor.py:5576
msgid "[success] Geometry shape skew on Y axis done..."
msgstr "[success] Geometry shape skew on Y axis done..."

#: flatcamEditors/FlatCAMGeoEditor.py:1565
#: flatcamEditors/FlatCAMGrbEditor.py:5580
msgid "[WARNING_NOTCL] Geometry shape skew Y cancelled..."
msgstr "[WARNING_NOTCL] Geometry shape skew Y cancelled..."

#: flatcamEditors/FlatCAMGeoEditor.py:1929
#: flatcamEditors/FlatCAMGeoEditor.py:1980
#: flatcamEditors/FlatCAMGrbEditor.py:1361
#: flatcamEditors/FlatCAMGrbEditor.py:1430
msgid "Click on Center point ..."
msgstr "Click on Center point ..."

#: flatcamEditors/FlatCAMGeoEditor.py:1936
#: flatcamEditors/FlatCAMGrbEditor.py:1369
msgid "Click on Perimeter point to complete ..."
msgstr "Click on Perimeter point to complete ..."

#: flatcamEditors/FlatCAMGeoEditor.py:1965
msgid "[success] Done. Adding Circle completed."
msgstr "[success] Done. Adding Circle completed."

#: flatcamEditors/FlatCAMGeoEditor.py:2000
#: flatcamEditors/FlatCAMGrbEditor.py:1462
msgid "Click on Start point ..."
msgstr "Click on Start point ..."

#: flatcamEditors/FlatCAMGeoEditor.py:2002
#: flatcamEditors/FlatCAMGrbEditor.py:1464
msgid "Click on Point3 ..."
msgstr "Click on Point3 ..."

#: flatcamEditors/FlatCAMGeoEditor.py:2004
#: flatcamEditors/FlatCAMGrbEditor.py:1466
msgid "Click on Stop point ..."
msgstr "Click on Stop point ..."

#: flatcamEditors/FlatCAMGeoEditor.py:2009
#: flatcamEditors/FlatCAMGrbEditor.py:1471
msgid "Click on Stop point to complete ..."
msgstr "Click on Stop point to complete ..."

#: flatcamEditors/FlatCAMGeoEditor.py:2011
#: flatcamEditors/FlatCAMGrbEditor.py:1473
msgid "Click on Point2 to complete ..."
msgstr "Click on Point2 to complete ..."

#: flatcamEditors/FlatCAMGeoEditor.py:2013
#: flatcamEditors/FlatCAMGrbEditor.py:1475
msgid "Click on Center point to complete ..."
msgstr "Click on Center point to complete ..."

#: flatcamEditors/FlatCAMGeoEditor.py:2025
#: flatcamEditors/FlatCAMGrbEditor.py:1487
#, python-format
msgid "Direction: %s"
msgstr "Direction: %s"

#: flatcamEditors/FlatCAMGeoEditor.py:2035
#: flatcamEditors/FlatCAMGrbEditor.py:1497
msgid "Mode: Start -> Stop -> Center. Click on Start point ..."
msgstr "Mode: Start -> Stop -> Center. Click on Start point ..."

#: flatcamEditors/FlatCAMGeoEditor.py:2038
#: flatcamEditors/FlatCAMGrbEditor.py:1500
msgid "Mode: Point1 -> Point3 -> Point2. Click on Point1 ..."
msgstr "Mode: Point1 -> Point3 -> Point2. Click on Point1 ..."

#: flatcamEditors/FlatCAMGeoEditor.py:2041
#: flatcamEditors/FlatCAMGrbEditor.py:1503
msgid "Mode: Center -> Start -> Stop. Click on Center point ..."
msgstr "Mode: Center -> Start -> Stop. Click on Center point ..."

#: flatcamEditors/FlatCAMGeoEditor.py:2179
msgid "[success] Done. Arc completed."
msgstr "[success] Done. Arc completed."

#: flatcamEditors/FlatCAMGeoEditor.py:2198
#: flatcamEditors/FlatCAMGeoEditor.py:2251
#: flatcamEditors/FlatCAMGeoEditor.py:2626
msgid "Click on 1st corner ..."
msgstr "Click on 1st corner ..."

#: flatcamEditors/FlatCAMGeoEditor.py:2204
msgid "Click on opposite corner to complete ..."
msgstr "Click on opposite corner to complete ..."

#: flatcamEditors/FlatCAMGeoEditor.py:2232
msgid "[success] Done. Rectangle completed."
msgstr "[success] Done. Rectangle completed."

#: flatcamEditors/FlatCAMGeoEditor.py:2258
msgid "Click on next Point or click right mouse button to complete ..."
msgstr "Click on next Point or click right mouse button to complete ..."

#: flatcamEditors/FlatCAMGeoEditor.py:2286
msgid "[success] Done. Polygon completed."
msgstr "[success] Done. Polygon completed."

#: flatcamEditors/FlatCAMGeoEditor.py:2296
#: flatcamEditors/FlatCAMGeoEditor.py:2342
#: flatcamEditors/FlatCAMGrbEditor.py:1058
#: flatcamEditors/FlatCAMGrbEditor.py:1252
msgid "Backtracked one point ..."
msgstr "Backtracked one point ..."

#: flatcamEditors/FlatCAMGeoEditor.py:2324
msgid "[success] Done. Path completed."
msgstr "[success] Done. Path completed."

#: flatcamEditors/FlatCAMGeoEditor.py:2447
msgid "[WARNING_NOTCL] MOVE: No shape selected. Select a shape to move ..."
msgstr "[WARNING_NOTCL] MOVE: No shape selected. Select a shape to move ..."

#: flatcamEditors/FlatCAMGeoEditor.py:2449
#: flatcamEditors/FlatCAMGeoEditor.py:2461
msgid " MOVE: Click on reference point ..."
msgstr " MOVE: Click on reference point ..."

#: flatcamEditors/FlatCAMGeoEditor.py:2452
msgid " Click on destination point ..."
msgstr " Click on destination point ..."

#: flatcamEditors/FlatCAMGeoEditor.py:2486
msgid "[success] Done. Geometry(s) Move completed."
msgstr "[success] Done. Geometry(s) Move completed."

#: flatcamEditors/FlatCAMGeoEditor.py:2606
msgid "[success] Done. Geometry(s) Copy completed."
msgstr "[success] Done. Geometry(s) Copy completed."

#: flatcamEditors/FlatCAMGeoEditor.py:2640
#, python-format
msgid ""
"[ERROR]Font not supported. Only Regular, Bold, Italic and BoldItalic are "
"supported. Error: %s"
msgstr ""
"[ERROR]Font not supported. Only Regular, Bold, Italic and BoldItalic are "
"supported. Error: %s"

#: flatcamEditors/FlatCAMGeoEditor.py:2650
msgid "[success] Done. Adding Text completed."
msgstr "[success] Done. Adding Text completed."

#: flatcamEditors/FlatCAMGeoEditor.py:2678
msgid "Create buffer geometry ..."
msgstr "Create buffer geometry ..."

#: flatcamEditors/FlatCAMGeoEditor.py:2689
#: flatcamEditors/FlatCAMGeoEditor.py:2715
#: flatcamEditors/FlatCAMGeoEditor.py:2741
msgid "[WARNING_NOTCL] Buffer cancelled. No shape selected."
msgstr "[WARNING_NOTCL] Buffer cancelled. No shape selected."

#: flatcamEditors/FlatCAMGeoEditor.py:2711
#: flatcamEditors/FlatCAMGrbEditor.py:4442
msgid "[success] Done. Buffer Tool completed."
msgstr "[success] Done. Buffer Tool completed."

#: flatcamEditors/FlatCAMGeoEditor.py:2737
msgid "[success] Done. Buffer Int Tool completed."
msgstr "[success] Done. Buffer Int Tool completed."

#: flatcamEditors/FlatCAMGeoEditor.py:2763
msgid "[success] Done. Buffer Ext Tool completed."
msgstr "[success] Done. Buffer Ext Tool completed."

#: flatcamEditors/FlatCAMGeoEditor.py:2798
#: flatcamEditors/FlatCAMGrbEditor.py:1983
msgid "Select a shape to act as deletion area ..."
msgstr "Select a shape to act as deletion area ..."

#: flatcamEditors/FlatCAMGeoEditor.py:2800
#: flatcamEditors/FlatCAMGeoEditor.py:2819
#: flatcamEditors/FlatCAMGeoEditor.py:2825
#: flatcamEditors/FlatCAMGrbEditor.py:1985
msgid "Click to pick-up the erase shape..."
msgstr "Click to pick-up the erase shape..."

#: flatcamEditors/FlatCAMGeoEditor.py:2829
#: flatcamEditors/FlatCAMGrbEditor.py:2042
msgid "Click to erase ..."
msgstr "Click to erase ..."

#: flatcamEditors/FlatCAMGeoEditor.py:2858
#: flatcamEditors/FlatCAMGrbEditor.py:2075
msgid "[success] Done. Eraser tool action completed."
msgstr "[success] Done. Eraser tool action completed."

#: flatcamEditors/FlatCAMGeoEditor.py:2901
msgid "Create Paint geometry ..."
msgstr "Create Paint geometry ..."

#: flatcamEditors/FlatCAMGeoEditor.py:2915
#: flatcamEditors/FlatCAMGrbEditor.py:2217
msgid "Shape transformations ..."
msgstr "Shape transformations ..."

#: flatcamEditors/FlatCAMGeoEditor.py:3416
#, python-brace-format
#| msgid ""
#| "[WARNING] Editing MultiGeo Geometry, tool: {tool} with diameter: {dia}"
msgid ""
"[WARNING_NOTCL] Editing MultiGeo Geometry, tool: {tool} with diameter: {dia}"
msgstr ""
"[WARNING_NOTCL] Editing MultiGeo Geometry, tool: {tool} with diameter: {dia}"

#: flatcamEditors/FlatCAMGeoEditor.py:3793
msgid "[WARNING_NOTCL] Copy cancelled. No shape selected."
msgstr "[WARNING_NOTCL] Copy cancelled. No shape selected."

#: flatcamEditors/FlatCAMGeoEditor.py:3800 flatcamGUI/FlatCAMGUI.py:2727
#: flatcamGUI/FlatCAMGUI.py:2773 flatcamGUI/FlatCAMGUI.py:2791
#: flatcamGUI/FlatCAMGUI.py:2922 flatcamGUI/FlatCAMGUI.py:2934
#: flatcamGUI/FlatCAMGUI.py:2968
msgid "Click on target point."
msgstr "Click on target point."

#: flatcamEditors/FlatCAMGeoEditor.py:4044
#: flatcamEditors/FlatCAMGeoEditor.py:4079
msgid ""
"[WARNING_NOTCL] A selection of at least 2 geo items is required to do "
"Intersection."
msgstr ""
"[WARNING_NOTCL] A selection of at least 2 geo items is required to do "
"Intersection."

#: flatcamEditors/FlatCAMGeoEditor.py:4163
#: flatcamEditors/FlatCAMGeoEditor.py:4201
#: flatcamEditors/FlatCAMGeoEditor.py:4277
msgid ""
"[ERROR_NOTCL] Negative buffer value is not accepted. Use Buffer interior to "
"generate an 'inside' shape"
msgstr ""
"[ERROR_NOTCL] Negative buffer value is not accepted. Use Buffer interior to "
"generate an 'inside' shape"

#: flatcamEditors/FlatCAMGeoEditor.py:4172
#: flatcamEditors/FlatCAMGeoEditor.py:4210
#: flatcamEditors/FlatCAMGeoEditor.py:4285
msgid "[WARNING_NOTCL] Nothing selected for buffering."
msgstr "[WARNING_NOTCL] Nothing selected for buffering."

#: flatcamEditors/FlatCAMGeoEditor.py:4176
#: flatcamEditors/FlatCAMGeoEditor.py:4214
#: flatcamEditors/FlatCAMGeoEditor.py:4289
msgid "[WARNING_NOTCL] Invalid distance for buffering."
msgstr "[WARNING_NOTCL] Invalid distance for buffering."

#: flatcamEditors/FlatCAMGeoEditor.py:4186
#: flatcamEditors/FlatCAMGeoEditor.py:4298
msgid ""
"[ERROR_NOTCL] Failed, the result is empty. Choose a different buffer value."
msgstr ""
"[ERROR_NOTCL] Failed, the result is empty. Choose a different buffer value."

#: flatcamEditors/FlatCAMGeoEditor.py:4194
msgid "[success] Full buffer geometry created."
msgstr "[success] Full buffer geometry created."

#: flatcamEditors/FlatCAMGeoEditor.py:4224
msgid ""
"[ERROR_NOTCL] Failed, the result is empty. Choose a smaller buffer value."
msgstr ""
"[ERROR_NOTCL] Failed, the result is empty. Choose a smaller buffer value."

#: flatcamEditors/FlatCAMGeoEditor.py:4239
msgid "[success] Interior buffer geometry created."
msgstr "[success] Interior buffer geometry created."

#: flatcamEditors/FlatCAMGeoEditor.py:4310
msgid "[success] Exterior buffer geometry created."
msgstr "[success] Exterior buffer geometry created."

#: flatcamEditors/FlatCAMGeoEditor.py:4374
msgid "[WARNING_NOTCL] Nothing selected for painting."
msgstr "[WARNING_NOTCL] Nothing selected for painting."

#: flatcamEditors/FlatCAMGeoEditor.py:4380
msgid "[WARNING] Invalid value for {}"
msgstr "[WARNING] Invalid value for {}"

#: flatcamEditors/FlatCAMGeoEditor.py:4386
msgid ""
"[ERROR_NOTCL] Could not do Paint. Overlap value has to be less than 1.00 "
"(100%)."
msgstr ""
"[ERROR_NOTCL] Could not do Paint. Overlap value has to be less than 1.00 "
"(100%)."

#: flatcamEditors/FlatCAMGeoEditor.py:4445
#, python-format
msgid ""
"[ERROR] Could not do Paint. Try a different combination of parameters. Or a "
"different method of Paint\n"
"%s"
msgstr ""
"[ERROR] Could not do Paint. Try a different combination of parameters. Or a "
"different method of Paint\n"
"%s"

#: flatcamEditors/FlatCAMGeoEditor.py:4456
msgid "[success] Paint done."
msgstr "[success] Paint done."

#: flatcamEditors/FlatCAMGrbEditor.py:200
msgid "[WARNING_NOTCL] To add an Pad first select a aperture in Aperture Table"
msgstr ""
"[WARNING_NOTCL] To add an Pad first select a aperture in Aperture Table"

#: flatcamEditors/FlatCAMGrbEditor.py:206
#: flatcamEditors/FlatCAMGrbEditor.py:398
msgid ""
"[WARNING_NOTCL] Aperture size is zero. It needs to be greater than zero."
msgstr ""
"[WARNING_NOTCL] Aperture size is zero. It needs to be greater than zero."

#: flatcamEditors/FlatCAMGrbEditor.py:357
#: flatcamEditors/FlatCAMGrbEditor.py:662
msgid ""
"Incompatible aperture type. Select an aperture with type 'C', 'R' or 'O'."
msgstr ""
"Incompatible aperture type. Select an aperture with type 'C', 'R' or 'O'."

#: flatcamEditors/FlatCAMGrbEditor.py:369
msgid "[success] Done. Adding Pad completed."
msgstr "[success] Done. Adding Pad completed."

#: flatcamEditors/FlatCAMGrbEditor.py:391
msgid ""
"[WARNING_NOTCL] To add an Pad Array first select a aperture in Aperture Table"
msgstr ""
"[WARNING_NOTCL] To add an Pad Array first select a aperture in Aperture Table"

#: flatcamEditors/FlatCAMGrbEditor.py:468
msgid "Click on the Pad Circular Array Start position"
msgstr "Click on the Pad Circular Array Start position"

#: flatcamEditors/FlatCAMGrbEditor.py:497
msgid "[ERROR_NOTCL] The value is mistyped. Check the value."
msgstr "[ERROR_NOTCL] The value is mistyped. Check the value."

#: flatcamEditors/FlatCAMGrbEditor.py:687
msgid "[WARNING_NOTCL] Too many Pads for the selected spacing angle."
msgstr "[WARNING_NOTCL] Too many Pads for the selected spacing angle."

#: flatcamEditors/FlatCAMGrbEditor.py:709
msgid "[success] Done. Pad Array added."
msgstr "[success] Done. Pad Array added."

#: flatcamEditors/FlatCAMGrbEditor.py:730
msgid "Select shape(s) and then click ..."
msgstr "Select shape(s) and then click ..."

#: flatcamEditors/FlatCAMGrbEditor.py:741
msgid "[ERROR_NOTCL] Failed. Nothing selected."
msgstr "[ERROR_NOTCL] Failed. Nothing selected."

#: flatcamEditors/FlatCAMGrbEditor.py:756
msgid ""
"[WARNING_NOTCL] Failed. Poligonize works only on geometries belonging to the "
"same aperture."
msgstr ""
"[WARNING_NOTCL] Failed. Poligonize works only on geometries belonging to the "
"same aperture."

#: flatcamEditors/FlatCAMGrbEditor.py:809
msgid "[success] Done. Poligonize completed."
msgstr "[success] Done. Poligonize completed."

#: flatcamEditors/FlatCAMGrbEditor.py:860
#: flatcamEditors/FlatCAMGrbEditor.py:1075
#: flatcamEditors/FlatCAMGrbEditor.py:1099
msgid "Corner Mode 1: 45 degrees ..."
msgstr "Corner Mode 1: 45 degrees ..."

#: flatcamEditors/FlatCAMGrbEditor.py:862
msgid "Click on 1st point ..."
msgstr "Click on 1st point ..."

#: flatcamEditors/FlatCAMGrbEditor.py:872
#: flatcamEditors/FlatCAMGrbEditor.py:1170
msgid "Click on next Point or click Right mouse button to complete ..."
msgstr "Click on next Point or click Right mouse button to complete ..."

#: flatcamEditors/FlatCAMGrbEditor.py:1063
#: flatcamEditors/FlatCAMGrbEditor.py:1096
msgid "Corner Mode 2: Reverse 45 degrees ..."
msgstr "Corner Mode 2: Reverse 45 degrees ..."

#: flatcamEditors/FlatCAMGrbEditor.py:1066
#: flatcamEditors/FlatCAMGrbEditor.py:1093
msgid "Corner Mode 3: 90 degrees ..."
msgstr "Corner Mode 3: 90 degrees ..."

#: flatcamEditors/FlatCAMGrbEditor.py:1069
#: flatcamEditors/FlatCAMGrbEditor.py:1090
msgid "Corner Mode 4: Reverse 90 degrees ..."
msgstr "Corner Mode 4: Reverse 90 degrees ..."

#: flatcamEditors/FlatCAMGrbEditor.py:1072
#: flatcamEditors/FlatCAMGrbEditor.py:1087
msgid "Corner Mode 5: Free angle ..."
msgstr "Corner Mode 5: Free angle ..."

#: flatcamEditors/FlatCAMGrbEditor.py:1126
#: flatcamEditors/FlatCAMGrbEditor.py:1284
#: flatcamEditors/FlatCAMGrbEditor.py:1323
msgid "Track Mode 1: 45 degrees ..."
msgstr "Track Mode 1: 45 degrees ..."

#: flatcamEditors/FlatCAMGrbEditor.py:1264
#: flatcamEditors/FlatCAMGrbEditor.py:1318
msgid "Track Mode 2: Reverse 45 degrees ..."
msgstr "Track Mode 2: Reverse 45 degrees ..."

#: flatcamEditors/FlatCAMGrbEditor.py:1269
#: flatcamEditors/FlatCAMGrbEditor.py:1313
msgid "Track Mode 3: 90 degrees ..."
msgstr "Track Mode 3: 90 degrees ..."

#: flatcamEditors/FlatCAMGrbEditor.py:1274
#: flatcamEditors/FlatCAMGrbEditor.py:1308
msgid "Track Mode 4: Reverse 90 degrees ..."
msgstr "Track Mode 4: Reverse 90 degrees ..."

#: flatcamEditors/FlatCAMGrbEditor.py:1279
#: flatcamEditors/FlatCAMGrbEditor.py:1303
msgid "Track Mode 5: Free angle ..."
msgstr "Track Mode 5: Free angle ..."

#: flatcamEditors/FlatCAMGrbEditor.py:1683
msgid "Scale the selected Gerber apertures ..."
msgstr "Scale the selected Gerber apertures ..."

#: flatcamEditors/FlatCAMGrbEditor.py:1725
msgid "Buffer the selected apertures ..."
msgstr "Buffer the selected apertures ..."

#: flatcamEditors/FlatCAMGrbEditor.py:1769
msgid "[WARNING_NOTCL] Nothing selected to move ..."
msgstr "[WARNING_NOTCL] Nothing selected to move ..."

#: flatcamEditors/FlatCAMGrbEditor.py:1892
msgid "[success] Done. Apertures Move completed."
msgstr "[success] Done. Apertures Move completed."

#: flatcamEditors/FlatCAMGrbEditor.py:1968
msgid "[success] Done. Apertures copied."
msgstr "[success] Done. Apertures copied."

#: flatcamEditors/FlatCAMGrbEditor.py:2259 flatcamGUI/FlatCAMGUI.py:1604
#: flatcamGUI/FlatCAMGUI.py:4323
msgid "Gerber Editor"
msgstr "Gerber Editor"

#: flatcamEditors/FlatCAMGrbEditor.py:2278 flatcamGUI/ObjectUI.py:192
msgid "<b>Apertures:</b>"
msgstr "<b>Apertures:</b>"

#: flatcamEditors/FlatCAMGrbEditor.py:2280 flatcamGUI/ObjectUI.py:194
msgid "Apertures Table for the Gerber Object."
msgstr "Apertures Table for the Gerber Object."

#: flatcamEditors/FlatCAMGrbEditor.py:2291
#: flatcamEditors/FlatCAMGrbEditor.py:3602 flatcamGUI/ObjectUI.py:228
msgid "Code"
msgstr "Code"

#: flatcamEditors/FlatCAMGrbEditor.py:2291
#: flatcamEditors/FlatCAMGrbEditor.py:3602 flatcamGUI/ObjectUI.py:228
#: flatcamGUI/ObjectUI.py:891 flatcamGUI/ObjectUI.py:1465
msgid "Type"
msgstr "Type"

#: flatcamEditors/FlatCAMGrbEditor.py:2291
#: flatcamEditors/FlatCAMGrbEditor.py:3602 flatcamGUI/ObjectUI.py:228
msgid "Size"
msgstr "Size"

#: flatcamEditors/FlatCAMGrbEditor.py:2291
#: flatcamEditors/FlatCAMGrbEditor.py:3602 flatcamGUI/ObjectUI.py:228
msgid "Dim"
msgstr "Dim"

#: flatcamEditors/FlatCAMGrbEditor.py:2295 flatcamGUI/ObjectUI.py:232
msgid "Index"
msgstr "Index"

#: flatcamEditors/FlatCAMGrbEditor.py:2297 flatcamGUI/ObjectUI.py:234
msgid "Aperture Code"
msgstr "Aperture Code"

#: flatcamEditors/FlatCAMGrbEditor.py:2299 flatcamGUI/ObjectUI.py:236
msgid "Type of aperture: circular, rectangle, macros etc"
msgstr "Type of aperture: circular, rectangle, macros etc"

#: flatcamEditors/FlatCAMGrbEditor.py:2301
#: flatcamEditors/FlatCAMGrbEditor.py:2334 flatcamGUI/ObjectUI.py:238
msgid "Aperture Size:"
msgstr "Aperture Size:"

#: flatcamEditors/FlatCAMGrbEditor.py:2303 flatcamGUI/ObjectUI.py:240
msgid ""
"Aperture Dimensions:\n"
" - (width, height) for R, O type.\n"
" - (dia, nVertices) for P type"
msgstr ""
"Aperture Dimensions:\n"
" - (width, height) for R, O type.\n"
" - (dia, nVertices) for P type"

#: flatcamEditors/FlatCAMGrbEditor.py:2324
msgid "Aperture Code:"
msgstr "Aperture Code:"

#: flatcamEditors/FlatCAMGrbEditor.py:2326
msgid "Code for the new aperture"
msgstr "Code for the new aperture"

#: flatcamEditors/FlatCAMGrbEditor.py:2336
msgid ""
"Size for the new aperture.\n"
"If aperture type is 'R' or 'O' then\n"
"this value is automatically\n"
"calculated as:\n"
"sqrt(width**2 + height**2)"
msgstr ""
"Size for the new aperture.\n"
"If aperture type is 'R' or 'O' then\n"
"this value is automatically\n"
"calculated as:\n"
"sqrt(width**2 + height**2)"

#: flatcamEditors/FlatCAMGrbEditor.py:2348
msgid "Aperture Type:"
msgstr "Aperture Type:"

#: flatcamEditors/FlatCAMGrbEditor.py:2350
msgid ""
"Select the type of new aperture. Can be:\n"
"C = circular\n"
"R = rectangular\n"
"O = oblong"
msgstr ""
"Select the type of new aperture. Can be:\n"
"C = circular\n"
"R = rectangular\n"
"O = oblong"

#: flatcamEditors/FlatCAMGrbEditor.py:2361
msgid "Aperture Dim:"
msgstr "Aperture Dim:"

#: flatcamEditors/FlatCAMGrbEditor.py:2363
msgid ""
"Dimensions for the new aperture.\n"
"Active only for rectangular apertures (type R).\n"
"The format is (width, height)"
msgstr ""
"Dimensions for the new aperture.\n"
"Active only for rectangular apertures (type R).\n"
"The format is (width, height)"

#: flatcamEditors/FlatCAMGrbEditor.py:2372
msgid "Add/Delete Aperture:"
msgstr "Add/Delete Aperture:"

#: flatcamEditors/FlatCAMGrbEditor.py:2374
msgid "Add/Delete an aperture in the aperture table"
msgstr "Add/Delete an aperture in the aperture table"

#: flatcamEditors/FlatCAMGrbEditor.py:2383
msgid "Add a new aperture to the aperture list."
msgstr "Add a new aperture to the aperture list."

#: flatcamEditors/FlatCAMGrbEditor.py:2388
msgid "Delete a aperture in the aperture list"
msgstr "Delete a aperture in the aperture list"

#: flatcamEditors/FlatCAMGrbEditor.py:2404
msgid "Buffer Aperture:"
msgstr "Buffer Aperture:"

#: flatcamEditors/FlatCAMGrbEditor.py:2406
msgid "Buffer a aperture in the aperture list"
msgstr "Buffer a aperture in the aperture list"

#: flatcamEditors/FlatCAMGrbEditor.py:2419
msgid ""
"There are 3 types of corners:\n"
" - 'Round': the corner is rounded.\n"
" - 'Square:' the corner is met in a sharp angle.\n"
" - 'Beveled:' the corner is a line that directly connects the features "
"meeting in the corner"
msgstr ""
"There are 3 types of corners:\n"
" - 'Round': the corner is rounded.\n"
" - 'Square:' the corner is met in a sharp angle.\n"
" - 'Beveled:' the corner is a line that directly connects the features "
"meeting in the corner"

#: flatcamEditors/FlatCAMGrbEditor.py:2434 flatcamGUI/FlatCAMGUI.py:717
#: flatcamGUI/FlatCAMGUI.py:1946
msgid "Buffer"
msgstr "Buffer"

#: flatcamEditors/FlatCAMGrbEditor.py:2448
msgid "Scale Aperture:"
msgstr "Scale Aperture:"

#: flatcamEditors/FlatCAMGrbEditor.py:2450
msgid "Scale a aperture in the aperture list"
msgstr "Scale a aperture in the aperture list"

#: flatcamEditors/FlatCAMGrbEditor.py:2458
msgid "Scale factor:"
msgstr "Scale factor:"

#: flatcamEditors/FlatCAMGrbEditor.py:2460
msgid ""
"The factor by which to scale the selected aperture.\n"
"Values can be between 0.0000 and 999.9999"
msgstr ""
"The factor by which to scale the selected aperture.\n"
"Values can be between 0.0000 and 999.9999"

#: flatcamEditors/FlatCAMGrbEditor.py:2488 flatcamGUI/FlatCAMGUI.py:707
#: flatcamGUI/FlatCAMGUI.py:1936
msgid "Add Pad Array"
msgstr "Add Pad Array"

#: flatcamEditors/FlatCAMGrbEditor.py:2490
msgid "Add an array of pads (linear or circular array)"
msgstr "Add an array of pads (linear or circular array)"

#: flatcamEditors/FlatCAMGrbEditor.py:2496
msgid ""
"Select the type of pads array to create.\n"
"It can be Linear X(Y) or Circular"
msgstr ""
"Select the type of pads array to create.\n"
"It can be Linear X(Y) or Circular"

#: flatcamEditors/FlatCAMGrbEditor.py:2507
msgid "Nr of pads:"
msgstr "Nr of pads:"

#: flatcamEditors/FlatCAMGrbEditor.py:2509
msgid "Specify how many pads to be in the array."
msgstr "Specify how many pads to be in the array."

#: flatcamEditors/FlatCAMGrbEditor.py:2986
#: flatcamEditors/FlatCAMGrbEditor.py:2990
msgid ""
"[WARNING_NOTCL] Aperture code value is missing or wrong format. Add it and "
"retry."
msgstr ""
"[WARNING_NOTCL] Aperture code value is missing or wrong format. Add it and "
"retry."

#: flatcamEditors/FlatCAMGrbEditor.py:3026
msgid ""
"[WARNING_NOTCL] Aperture dimensions value is missing or wrong format. Add it "
"in format (width, height) and retry."
msgstr ""
"[WARNING_NOTCL] Aperture dimensions value is missing or wrong format. Add it "
"in format (width, height) and retry."

#: flatcamEditors/FlatCAMGrbEditor.py:3038
msgid ""
"[WARNING_NOTCL] Aperture size value is missing or wrong format. Add it and "
"retry."
msgstr ""
"[WARNING_NOTCL] Aperture size value is missing or wrong format. Add it and "
"retry."

#: flatcamEditors/FlatCAMGrbEditor.py:3049
msgid "[WARNING_NOTCL] Aperture already in the aperture table."
msgstr "[WARNING_NOTCL] Aperture already in the aperture table."

#: flatcamEditors/FlatCAMGrbEditor.py:3056
#, python-brace-format
msgid "[success] Added new aperture with code: {apid}"
msgstr "[success] Added new aperture with code: {apid}"

#: flatcamEditors/FlatCAMGrbEditor.py:3084
msgid "[WARNING_NOTCL] Select an aperture in Aperture Table"
msgstr "[WARNING_NOTCL] Select an aperture in Aperture Table"

#: flatcamEditors/FlatCAMGrbEditor.py:3090
#, python-format
msgid "[WARNING_NOTCL] Select an aperture in Aperture Table --> %s"
msgstr "[WARNING_NOTCL] Select an aperture in Aperture Table --> %s"

#: flatcamEditors/FlatCAMGrbEditor.py:3113
#, python-brace-format
msgid "[success] Deleted aperture with code: {del_dia}"
msgstr "[success] Deleted aperture with code: {del_dia}"

#: flatcamEditors/FlatCAMGrbEditor.py:3533
#, python-format
msgid "Adding aperture: %s geo ..."
msgstr "Adding aperture: %s geo ..."

#: flatcamEditors/FlatCAMGrbEditor.py:3718
msgid ""
"[ERROR_NOTCL] There are no Aperture definitions in the file. Aborting Gerber "
"creation."
msgstr ""
"[ERROR_NOTCL] There are no Aperture definitions in the file. Aborting Gerber "
"creation."

#: flatcamEditors/FlatCAMGrbEditor.py:3721
msgid "[ERROR] An internal error has occurred. See shell.\n"
msgstr "[ERROR] An internal error has occurred. See shell.\n"

#: flatcamEditors/FlatCAMGrbEditor.py:3726
msgid "Creating Gerber."
msgstr "Creating Gerber."

#: flatcamEditors/FlatCAMGrbEditor.py:3734
msgid "[success] Gerber editing finished."
msgstr "[success] Gerber editing finished."

#: flatcamEditors/FlatCAMGrbEditor.py:3750
msgid "[WARNING_NOTCL] Cancelled. No aperture is selected"
msgstr "[WARNING_NOTCL] Cancelled. No aperture is selected"

#: flatcamEditors/FlatCAMGrbEditor.py:4270
msgid "[ERROR_NOTCL] Failed. No aperture geometry is selected."
msgstr "[ERROR_NOTCL] Failed. No aperture geometry is selected."

#: flatcamEditors/FlatCAMGrbEditor.py:4278
msgid "[success] Done. Apertures geometry deleted."
msgstr "[success] Done. Apertures geometry deleted."

#: flatcamEditors/FlatCAMGrbEditor.py:4427
msgid ""
"[WARNING_NOTCL] No aperture to buffer. Select at least one aperture and try "
"again."
msgstr ""
"[WARNING_NOTCL] No aperture to buffer. Select at least one aperture and try "
"again."

#: flatcamEditors/FlatCAMGrbEditor.py:4456
msgid ""
"[WARNING_NOTCL] Scale factor value is missing or wrong format. Add it and "
"retry."
msgstr ""
"[WARNING_NOTCL] Scale factor value is missing or wrong format. Add it and "
"retry."

#: flatcamEditors/FlatCAMGrbEditor.py:4486
msgid ""
"[WARNING_NOTCL] No aperture to scale. Select at least one aperture and try "
"again."
msgstr ""
"[WARNING_NOTCL] No aperture to scale. Select at least one aperture and try "
"again."

#: flatcamEditors/FlatCAMGrbEditor.py:4502
msgid "[success] Done. Scale Tool completed."
msgstr "[success] Done. Scale Tool completed."

#: flatcamGUI/FlatCAMGUI.py:50
msgid "&File"
msgstr "&File"

#: flatcamGUI/FlatCAMGUI.py:55
msgid "&New Project ...\tCTRL+N"
msgstr "&New Project ...\tCTRL+N"

#: flatcamGUI/FlatCAMGUI.py:57
msgid "Will create a new, blank project"
msgstr "Will create a new, blank project"

#: flatcamGUI/FlatCAMGUI.py:62
msgid "&New"
msgstr "&New"

#: flatcamGUI/FlatCAMGUI.py:65
msgid "Geometry\tN"
msgstr "Geometry\tN"

#: flatcamGUI/FlatCAMGUI.py:67
msgid "Will create a new, empty Geometry Object."
msgstr "Will create a new, empty Geometry Object."

#: flatcamGUI/FlatCAMGUI.py:69
msgid "Gerber\tB"
msgstr "Gerber\tB"

#: flatcamGUI/FlatCAMGUI.py:71
msgid "Will create a new, empty Gerber Object."
msgstr "Will create a new, empty Gerber Object."

#: flatcamGUI/FlatCAMGUI.py:73
msgid "Excellon\tL"
msgstr "Excellon\tL"

#: flatcamGUI/FlatCAMGUI.py:75
msgid "Will create a new, empty Excellon Object."
msgstr "Will create a new, empty Excellon Object."

#: flatcamGUI/FlatCAMGUI.py:78 flatcamTools/ToolPcbWizard.py:63
#: flatcamTools/ToolPcbWizard.py:71
msgid "Open"
msgstr "Open"

#: flatcamGUI/FlatCAMGUI.py:83
msgid "Open &Gerber ...\tCTRL+G"
msgstr "Open &Gerber ...\tCTRL+G"

#: flatcamGUI/FlatCAMGUI.py:90
msgid "Open &Excellon ...\tCTRL+E"
msgstr "Open &Excellon ...\tCTRL+E"

#: flatcamGUI/FlatCAMGUI.py:95
msgid "Open G-&Code ..."
msgstr "Open G-&Code ..."

#: flatcamGUI/FlatCAMGUI.py:99
msgid "Open &Project ..."
msgstr "Open &Project ..."

#: flatcamGUI/FlatCAMGUI.py:105
msgid "Open Config ..."
msgstr "Open Config ..."

#: flatcamGUI/FlatCAMGUI.py:109
msgid "Recent files"
msgstr "Recent files"

#: flatcamGUI/FlatCAMGUI.py:115
msgid "Scripting"
msgstr "Scripting"

#: flatcamGUI/FlatCAMGUI.py:118
msgid "New Script ..."
msgstr "New Script ..."

#: flatcamGUI/FlatCAMGUI.py:120
msgid "Open Script ..."
msgstr "Open Script ..."

#: flatcamGUI/FlatCAMGUI.py:122
msgid "Run Script ...\tSHIFT+S"
msgstr "Run Script ...\tSHIFT+S"

#: flatcamGUI/FlatCAMGUI.py:125
msgid ""
"Will run the opened Tcl Script thus\n"
"enabling the automation of certain\n"
"functions of FlatCAM."
msgstr ""
"Will run the opened Tcl Script thus\n"
"enabling the automation of certain\n"
"functions of FlatCAM."

#: flatcamGUI/FlatCAMGUI.py:138
msgid "Import"
msgstr "Import"

#: flatcamGUI/FlatCAMGUI.py:140
msgid "&SVG as Geometry Object ..."
msgstr "&SVG as Geometry Object ..."

#: flatcamGUI/FlatCAMGUI.py:143
msgid "&SVG as Gerber Object ..."
msgstr "&SVG as Gerber Object ..."

#: flatcamGUI/FlatCAMGUI.py:148
msgid "&DXF as Geometry Object ..."
msgstr "&DXF as Geometry Object ..."

#: flatcamGUI/FlatCAMGUI.py:151
msgid "&DXF as Gerber Object ..."
msgstr "&DXF as Gerber Object ..."

#: flatcamGUI/FlatCAMGUI.py:156
msgid "Export"
msgstr "Export"

#: flatcamGUI/FlatCAMGUI.py:159
msgid "Export &SVG ..."
msgstr "Export &SVG ..."

#: flatcamGUI/FlatCAMGUI.py:162
msgid "Export DXF ..."
msgstr "Export DXF ..."

#: flatcamGUI/FlatCAMGUI.py:167
msgid "Export &PNG ..."
msgstr "Export &PNG ..."

#: flatcamGUI/FlatCAMGUI.py:169
msgid ""
"Will export an image in PNG format,\n"
"the saved image will contain the visual \n"
"information currently in FlatCAM Plot Area."
msgstr ""
"Will export an image in PNG format,\n"
"the saved image will contain the visual \n"
"information currently in FlatCAM Plot Area."

#: flatcamGUI/FlatCAMGUI.py:177
msgid "Export &Excellon ..."
msgstr "Export &Excellon ..."

#: flatcamGUI/FlatCAMGUI.py:180
msgid ""
"Will export an Excellon Object as Excellon file,\n"
"the coordinates format, the file units and zeros\n"
"are set in Preferences -> Excellon Export."
msgstr ""
"Will export an Excellon Object as Excellon file,\n"
"the coordinates format, the file units and zeros\n"
"are set in Preferences -> Excellon Export."

#: flatcamGUI/FlatCAMGUI.py:186
msgid "Export &Gerber ..."
msgstr "Export &Gerber ..."

#: flatcamGUI/FlatCAMGUI.py:189
msgid ""
"Will export an Gerber Object as Gerber file,\n"
"the coordinates format, the file units and zeros\n"
"are set in Preferences -> Gerber Export."
msgstr ""
"Will export an Gerber Object as Gerber file,\n"
"the coordinates format, the file units and zeros\n"
"are set in Preferences -> Gerber Export."

#: flatcamGUI/FlatCAMGUI.py:199
msgid "Save &Defaults"
msgstr "Save &Defaults"

#: flatcamGUI/FlatCAMGUI.py:205 flatcamGUI/FlatCAMGUI.py:528
msgid "Save"
msgstr "Save"

#: flatcamGUI/FlatCAMGUI.py:208
msgid "&Save Project ..."
msgstr "&Save Project ..."

#: flatcamGUI/FlatCAMGUI.py:213
msgid "Save Project &As ...\tCTRL+S"
msgstr "Save Project &As ...\tCTRL+S"

#: flatcamGUI/FlatCAMGUI.py:217
msgid "Save Project C&opy ..."
msgstr "Save Project C&opy ..."

#: flatcamGUI/FlatCAMGUI.py:225
msgid "E&xit"
msgstr "E&xit"

#: flatcamGUI/FlatCAMGUI.py:231
msgid "&Edit"
msgstr "&Edit"

#: flatcamGUI/FlatCAMGUI.py:234
msgid "Edit Object\tE"
msgstr "Edit Object\tE"

#: flatcamGUI/FlatCAMGUI.py:235
msgid "Close Editor\tCTRL+S"
msgstr "Close Editor\tCTRL+S"

#: flatcamGUI/FlatCAMGUI.py:243
msgid "Conversion"
msgstr "Conversion"

#: flatcamGUI/FlatCAMGUI.py:245
msgid "&Join Geo/Gerber/Exc -> Geo"
msgstr "&Join Geo/Gerber/Exc -> Geo"

#: flatcamGUI/FlatCAMGUI.py:247
msgid ""
"Merge a selection of objects, which can be of type:\n"
"- Gerber\n"
"- Excellon\n"
"- Geometry\n"
"into a new combo Geometry object."
msgstr ""
"Merge a selection of objects, which can be of type:\n"
"- Gerber\n"
"- Excellon\n"
"- Geometry\n"
"into a new combo Geometry object."

#: flatcamGUI/FlatCAMGUI.py:254
msgid "Join Excellon(s) -> Excellon"
msgstr "Join Excellon(s) -> Excellon"

#: flatcamGUI/FlatCAMGUI.py:256
msgid "Merge a selection of Excellon objects into a new combo Excellon object."
msgstr ""
"Merge a selection of Excellon objects into a new combo Excellon object."

#: flatcamGUI/FlatCAMGUI.py:259
msgid "Join Gerber(s) -> Gerber"
msgstr "Join Gerber(s) -> Gerber"

#: flatcamGUI/FlatCAMGUI.py:261
msgid "Merge a selection of Gerber objects into a new combo Gerber object."
msgstr "Merge a selection of Gerber objects into a new combo Gerber object."

#: flatcamGUI/FlatCAMGUI.py:266
msgid "Convert Single to MultiGeo"
msgstr "Convert Single to MultiGeo"

#: flatcamGUI/FlatCAMGUI.py:268
msgid ""
"Will convert a Geometry object from single_geometry type\n"
"to a multi_geometry type."
msgstr ""
"Will convert a Geometry object from single_geometry type\n"
"to a multi_geometry type."

#: flatcamGUI/FlatCAMGUI.py:272
msgid "Convert Multi to SingleGeo"
msgstr "Convert Multi to SingleGeo"

#: flatcamGUI/FlatCAMGUI.py:274
msgid ""
"Will convert a Geometry object from multi_geometry type\n"
"to a single_geometry type."
msgstr ""
"Will convert a Geometry object from multi_geometry type\n"
"to a single_geometry type."

#: flatcamGUI/FlatCAMGUI.py:280
msgid "Convert Any to Geo"
msgstr "Convert Any to Geo"

#: flatcamGUI/FlatCAMGUI.py:282
msgid "Convert Any to Gerber"
msgstr "Convert Any to Gerber"

#: flatcamGUI/FlatCAMGUI.py:287
msgid "&Copy\tCTRL+C"
msgstr "&Copy\tCTRL+C"

#: flatcamGUI/FlatCAMGUI.py:291
msgid "&Delete\tDEL"
msgstr "&Delete\tDEL"

#: flatcamGUI/FlatCAMGUI.py:295
msgid "Se&t Origin\tO"
msgstr "Se&t Origin\tO"

#: flatcamGUI/FlatCAMGUI.py:296
msgid "Jump to Location\tJ"
msgstr "Jump to Location\tJ"

#: flatcamGUI/FlatCAMGUI.py:301
msgid "Toggle Units\tQ"
msgstr "Toggle Units\tQ"

#: flatcamGUI/FlatCAMGUI.py:303
msgid "&Select All\tCTRL+A"
msgstr "&Select All\tCTRL+A"

#: flatcamGUI/FlatCAMGUI.py:307
msgid "&Preferences\tSHIFT+P"
msgstr "&Preferences\tSHIFT+P"

#: flatcamGUI/FlatCAMGUI.py:310
msgid "&Options"
msgstr "&Options"

#: flatcamGUI/FlatCAMGUI.py:325
msgid "&Rotate Selection\tSHIFT+(R)"
msgstr "&Rotate Selection\tSHIFT+(R)"

#: flatcamGUI/FlatCAMGUI.py:330
msgid "&Skew on X axis\tSHIFT+X"
msgstr "&Skew on X axis\tSHIFT+X"

#: flatcamGUI/FlatCAMGUI.py:332
msgid "S&kew on Y axis\tSHIFT+Y"
msgstr "S&kew on Y axis\tSHIFT+Y"

#: flatcamGUI/FlatCAMGUI.py:337
msgid "Flip on &X axis\tX"
msgstr "Flip on &X axis\tX"

#: flatcamGUI/FlatCAMGUI.py:339
msgid "Flip on &Y axis\tY"
msgstr "Flip on &Y axis\tY"

#: flatcamGUI/FlatCAMGUI.py:344
msgid "View source\tALT+S"
msgstr "View source\tALT+S"

#: flatcamGUI/FlatCAMGUI.py:349
msgid "&View"
msgstr "&View"

#: flatcamGUI/FlatCAMGUI.py:350
msgid "Enable all plots\tALT+1"
msgstr "Enable all plots\tALT+1"

#: flatcamGUI/FlatCAMGUI.py:352
msgid "Disable all plots\tALT+2"
msgstr "Disable all plots\tALT+2"

#: flatcamGUI/FlatCAMGUI.py:354
msgid "Disable non-selected\tALT+3"
msgstr "Disable non-selected\tALT+3"

#: flatcamGUI/FlatCAMGUI.py:357
msgid "&Zoom Fit\tV"
msgstr "&Zoom Fit\tV"

#: flatcamGUI/FlatCAMGUI.py:358
msgid "&Zoom In\t-"
msgstr "&Zoom In\t-"

#: flatcamGUI/FlatCAMGUI.py:359
msgid "&Zoom Out\t="
msgstr "&Zoom Out\t="

#: flatcamGUI/FlatCAMGUI.py:363
msgid "Toggle Code Editor\tCTRL+E"
msgstr "Toggle Code Editor\tCTRL+E"

#: flatcamGUI/FlatCAMGUI.py:366
msgid "&Toggle FullScreen\tALT+F10"
msgstr "&Toggle FullScreen\tALT+F10"

#: flatcamGUI/FlatCAMGUI.py:368
msgid "&Toggle Plot Area\tCTRL+F10"
msgstr "&Toggle Plot Area\tCTRL+F10"

#: flatcamGUI/FlatCAMGUI.py:370
msgid "&Toggle Project/Sel/Tool\t`"
msgstr "&Toggle Project/Sel/Tool\t`"

#: flatcamGUI/FlatCAMGUI.py:373
msgid "&Toggle Grid Snap\tG"
msgstr "&Toggle Grid Snap\tG"

#: flatcamGUI/FlatCAMGUI.py:375
msgid "&Toggle Axis\tSHIFT+G"
msgstr "&Toggle Axis\tSHIFT+G"

#: flatcamGUI/FlatCAMGUI.py:378
msgid "Toggle Workspace\tSHIFT+W"
msgstr "Toggle Workspace\tSHIFT+W"

#: flatcamGUI/FlatCAMGUI.py:381
msgid "&Tool"
msgstr "&Tool"

#: flatcamGUI/FlatCAMGUI.py:383
msgid "&Command Line\tS"
msgstr "&Command Line\tS"

#: flatcamGUI/FlatCAMGUI.py:386
msgid "&Help"
msgstr "&Help"

#: flatcamGUI/FlatCAMGUI.py:387
msgid "Help\tF1"
msgstr "Help\tF1"

#: flatcamGUI/FlatCAMGUI.py:388
msgid "FlatCAM.org"
msgstr "FlatCAM.org"

#: flatcamGUI/FlatCAMGUI.py:391
msgid "Shortcuts List\tF3"
msgstr "Shortcuts List\tF3"

#: flatcamGUI/FlatCAMGUI.py:392
msgid "YouTube Channel\tF4"
msgstr "YouTube Channel\tF4"

#: flatcamGUI/FlatCAMGUI.py:394
msgid "About"
msgstr "About"

#: flatcamGUI/FlatCAMGUI.py:401
msgid "Add Circle\tO"
msgstr "Add Circle\tO"

#: flatcamGUI/FlatCAMGUI.py:403
msgid "Add Arc\tA"
msgstr "Add Arc\tA"

#: flatcamGUI/FlatCAMGUI.py:406
msgid "Add Rectangle\tR"
msgstr "Add Rectangle\tR"

#: flatcamGUI/FlatCAMGUI.py:409
msgid "Add Polygon\tN"
msgstr "Add Polygon\tN"

#: flatcamGUI/FlatCAMGUI.py:411
msgid "Add Path\tP"
msgstr "Add Path\tP"

#: flatcamGUI/FlatCAMGUI.py:413
msgid "Add Text\tT"
msgstr "Add Text\tT"

#: flatcamGUI/FlatCAMGUI.py:416
msgid "Polygon Union\tU"
msgstr "Polygon Union\tU"

#: flatcamGUI/FlatCAMGUI.py:418
msgid "Polygon Intersection\tE"
msgstr "Polygon Intersection\tE"

#: flatcamGUI/FlatCAMGUI.py:420
msgid "Polygon Subtraction\tS"
msgstr "Polygon Subtraction\tS"

#: flatcamGUI/FlatCAMGUI.py:424
msgid "Cut Path\tX"
msgstr "Cut Path\tX"

#: flatcamGUI/FlatCAMGUI.py:426
msgid "Copy Geom\tC"
msgstr "Copy Geom\tC"

#: flatcamGUI/FlatCAMGUI.py:428
msgid "Delete Shape\tDEL"
msgstr "Delete Shape\tDEL"

#: flatcamGUI/FlatCAMGUI.py:431 flatcamGUI/FlatCAMGUI.py:503
msgid "Move\tM"
msgstr "Move\tM"

#: flatcamGUI/FlatCAMGUI.py:433
msgid "Buffer Tool\tB"
msgstr "Buffer Tool\tB"

#: flatcamGUI/FlatCAMGUI.py:436
msgid "Paint Tool\tI"
msgstr "Paint Tool\tI"

#: flatcamGUI/FlatCAMGUI.py:439
msgid "Transform Tool\tALT+R"
msgstr "Transform Tool\tALT+R"

#: flatcamGUI/FlatCAMGUI.py:443
msgid "Toggle Corner Snap\tK"
msgstr "Toggle Corner Snap\tK"

#: flatcamGUI/FlatCAMGUI.py:446
msgid ">Excellon Editor<"
msgstr ">Excellon Editor<"

#: flatcamGUI/FlatCAMGUI.py:450
msgid "Add Drill Array\tA"
msgstr "Add Drill Array\tA"

#: flatcamGUI/FlatCAMGUI.py:452
msgid "Add Drill\tD"
msgstr "Add Drill\tD"

#: flatcamGUI/FlatCAMGUI.py:456
msgid "Resize Drill(S)\tR"
msgstr "Resize Drill(S)\tR"

#: flatcamGUI/FlatCAMGUI.py:458 flatcamGUI/FlatCAMGUI.py:496
msgid "Copy\tC"
msgstr "Copy\tC"

#: flatcamGUI/FlatCAMGUI.py:460 flatcamGUI/FlatCAMGUI.py:498
msgid "Delete\tDEL"
msgstr "Delete\tDEL"

#: flatcamGUI/FlatCAMGUI.py:465
msgid "Move Drill(s)\tM"
msgstr "Move Drill(s)\tM"

#: flatcamGUI/FlatCAMGUI.py:468
msgid ">Gerber Editor<"
msgstr ">Gerber Editor<"

#: flatcamGUI/FlatCAMGUI.py:472
msgid "Add Pad\tP"
msgstr "Add Pad\tP"

#: flatcamGUI/FlatCAMGUI.py:474
msgid "Add Pad Array\tA"
msgstr "Add Pad Array\tA"

#: flatcamGUI/FlatCAMGUI.py:476
msgid "Add Track\tT"
msgstr "Add Track\tT"

#: flatcamGUI/FlatCAMGUI.py:478
msgid "Add Region\tN"
msgstr "Add Region\tN"

#: flatcamGUI/FlatCAMGUI.py:482
msgid "Poligonize\tALT+N"
msgstr "Poligonize\tALT+N"

#: flatcamGUI/FlatCAMGUI.py:484
msgid "Add SemiDisc\tE"
msgstr "Add SemiDisc\tE"

#: flatcamGUI/FlatCAMGUI.py:486
msgid "Add Disc\tD"
msgstr "Add Disc\tD"

#: flatcamGUI/FlatCAMGUI.py:488
msgid "Buffer\tB"
msgstr "Buffer\tB"

#: flatcamGUI/FlatCAMGUI.py:490
msgid "Scale\tS"
msgstr "Scale\tS"

#: flatcamGUI/FlatCAMGUI.py:492
msgid "Transform\tALT+R"
msgstr "Transform\tALT+R"

#: flatcamGUI/FlatCAMGUI.py:519
msgid "Enable Plot"
msgstr "Enable Plot"

#: flatcamGUI/FlatCAMGUI.py:520 flatcamGUI/FlatCAMGUI.py:1577
msgid "Disable Plot"
msgstr "Disable Plot"

#: flatcamGUI/FlatCAMGUI.py:522
msgid "Generate CNC"
msgstr "Generate CNC"

#: flatcamGUI/FlatCAMGUI.py:523
msgid "View Source"
msgstr "View Source"

#: flatcamGUI/FlatCAMGUI.py:525 flatcamGUI/FlatCAMGUI.py:1617
msgid "Edit"
msgstr "Edit"

#: flatcamGUI/FlatCAMGUI.py:531 flatcamGUI/FlatCAMGUI.py:1623
#: flatcamTools/ToolProperties.py:25
msgid "Properties"
msgstr "Properties"

#: flatcamGUI/FlatCAMGUI.py:560
msgid "File Toolbar"
msgstr "File Toolbar"

#: flatcamGUI/FlatCAMGUI.py:564
msgid "Edit Toolbar"
msgstr "Edit Toolbar"

#: flatcamGUI/FlatCAMGUI.py:568
msgid "View Toolbar"
msgstr "View Toolbar"

#: flatcamGUI/FlatCAMGUI.py:572
msgid "Shell Toolbar"
msgstr "Shell Toolbar"

#: flatcamGUI/FlatCAMGUI.py:576
msgid "Tools Toolbar"
msgstr "Tools Toolbar"

#: flatcamGUI/FlatCAMGUI.py:580
msgid "Excellon Editor Toolbar"
msgstr "Excellon Editor Toolbar"

#: flatcamGUI/FlatCAMGUI.py:584
msgid "Geometry Editor Toolbar"
msgstr "Geometry Editor Toolbar"

#: flatcamGUI/FlatCAMGUI.py:588
msgid "Gerber Editor Toolbar"
msgstr "Gerber Editor Toolbar"

#: flatcamGUI/FlatCAMGUI.py:592
msgid "Grid Toolbar"
msgstr "Grid Toolbar"

#: flatcamGUI/FlatCAMGUI.py:611 flatcamGUI/FlatCAMGUI.py:1835
msgid "Open project"
msgstr "Open project"

#: flatcamGUI/FlatCAMGUI.py:612 flatcamGUI/FlatCAMGUI.py:1836
msgid "Save project"
msgstr "Save project"

#: flatcamGUI/FlatCAMGUI.py:615 flatcamGUI/FlatCAMGUI.py:1839
msgid "New Blank Geometry"
msgstr "New Blank Geometry"

#: flatcamGUI/FlatCAMGUI.py:616
msgid "New Blank Gerber"
msgstr "New Blank Gerber"

#: flatcamGUI/FlatCAMGUI.py:617 flatcamGUI/FlatCAMGUI.py:1840
msgid "New Blank Excellon"
msgstr "New Blank Excellon"

#: flatcamGUI/FlatCAMGUI.py:619 flatcamGUI/FlatCAMGUI.py:1842
msgid "Editor"
msgstr "Editor"

#: flatcamGUI/FlatCAMGUI.py:621 flatcamGUI/FlatCAMGUI.py:1844
msgid "Save Object and close the Editor"
msgstr "Save Object and close the Editor"

#: flatcamGUI/FlatCAMGUI.py:625 flatcamGUI/FlatCAMGUI.py:1848
msgid "&Delete"
msgstr "&Delete"

#: flatcamGUI/FlatCAMGUI.py:628 flatcamGUI/FlatCAMGUI.py:1851
msgid "&Replot"
msgstr "&Replot"

#: flatcamGUI/FlatCAMGUI.py:629 flatcamGUI/FlatCAMGUI.py:1852
msgid "&Clear plot"
msgstr "&Clear plot"

#: flatcamGUI/FlatCAMGUI.py:630 flatcamGUI/FlatCAMGUI.py:1853
msgid "Zoom In"
msgstr "Zoom In"

#: flatcamGUI/FlatCAMGUI.py:631 flatcamGUI/FlatCAMGUI.py:1854
msgid "Zoom Out"
msgstr "Zoom Out"

#: flatcamGUI/FlatCAMGUI.py:632 flatcamGUI/FlatCAMGUI.py:1592
#: flatcamGUI/FlatCAMGUI.py:1855
msgid "Zoom Fit"
msgstr "Zoom Fit"

#: flatcamGUI/FlatCAMGUI.py:637 flatcamGUI/FlatCAMGUI.py:1860
msgid "&Command Line"
msgstr "&Command Line"

#: flatcamGUI/FlatCAMGUI.py:640 flatcamGUI/FlatCAMGUI.py:1863
msgid "2Sided Tool"
msgstr "2Sided Tool"

#: flatcamGUI/FlatCAMGUI.py:641 flatcamGUI/FlatCAMGUI.py:1864
msgid "&Cutout Tool"
msgstr "&Cutout Tool"

#: flatcamGUI/FlatCAMGUI.py:642 flatcamGUI/FlatCAMGUI.py:1865
#: flatcamGUI/ObjectUI.py:392 flatcamTools/ToolNonCopperClear.py:285
msgid "NCC Tool"
msgstr "NCC Tool"

#: flatcamGUI/FlatCAMGUI.py:646 flatcamGUI/FlatCAMGUI.py:1869
msgid "Panel Tool"
msgstr "Panel Tool"

#: flatcamGUI/FlatCAMGUI.py:647 flatcamGUI/FlatCAMGUI.py:1870
#: flatcamTools/ToolFilm.py:204
msgid "Film Tool"
msgstr "Film Tool"

#: flatcamGUI/FlatCAMGUI.py:648 flatcamGUI/FlatCAMGUI.py:1872
msgid "SolderPaste Tool"
msgstr "SolderPaste Tool"

#: flatcamGUI/FlatCAMGUI.py:649 flatcamGUI/FlatCAMGUI.py:1873
#: flatcamTools/ToolSub.py:26
msgid "Substract Tool"
msgstr "Substract Tool"

#: flatcamGUI/FlatCAMGUI.py:653 flatcamGUI/FlatCAMGUI.py:1878
msgid "Calculators Tool"
msgstr "Calculators Tool"

#: flatcamGUI/FlatCAMGUI.py:657 flatcamGUI/FlatCAMGUI.py:671
#: flatcamGUI/FlatCAMGUI.py:705 flatcamGUI/FlatCAMGUI.py:1882
#: flatcamGUI/FlatCAMGUI.py:1934
msgid "Select"
msgstr "Select"

#: flatcamGUI/FlatCAMGUI.py:658 flatcamGUI/FlatCAMGUI.py:1883
msgid "Add Drill Hole"
msgstr "Add Drill Hole"

#: flatcamGUI/FlatCAMGUI.py:660 flatcamGUI/FlatCAMGUI.py:1885
msgid "Add Drill Hole Array"
msgstr "Add Drill Hole Array"

#: flatcamGUI/FlatCAMGUI.py:661 flatcamGUI/FlatCAMGUI.py:1886
msgid "Resize Drill"
msgstr "Resize Drill"

#: flatcamGUI/FlatCAMGUI.py:664 flatcamGUI/FlatCAMGUI.py:1889
msgid "Copy Drill"
msgstr "Copy Drill"

#: flatcamGUI/FlatCAMGUI.py:665 flatcamGUI/FlatCAMGUI.py:1891
msgid "Delete Drill"
msgstr "Delete Drill"

#: flatcamGUI/FlatCAMGUI.py:668 flatcamGUI/FlatCAMGUI.py:1894
msgid "Move Drill"
msgstr "Move Drill"

#: flatcamGUI/FlatCAMGUI.py:672 flatcamGUI/FlatCAMGUI.py:1898
msgid "Add Circle"
msgstr "Add Circle"

#: flatcamGUI/FlatCAMGUI.py:673 flatcamGUI/FlatCAMGUI.py:1899
msgid "Add Arc"
msgstr "Add Arc"

#: flatcamGUI/FlatCAMGUI.py:675 flatcamGUI/FlatCAMGUI.py:1901
msgid "Add Rectangle"
msgstr "Add Rectangle"

#: flatcamGUI/FlatCAMGUI.py:678 flatcamGUI/FlatCAMGUI.py:1904
msgid "Add Path"
msgstr "Add Path"

#: flatcamGUI/FlatCAMGUI.py:679 flatcamGUI/FlatCAMGUI.py:1906
msgid "Add Polygon"
msgstr "Add Polygon"

#: flatcamGUI/FlatCAMGUI.py:681 flatcamGUI/FlatCAMGUI.py:1908
msgid "Add Text"
msgstr "Add Text"

#: flatcamGUI/FlatCAMGUI.py:682 flatcamGUI/FlatCAMGUI.py:1910
msgid "Add Buffer"
msgstr "Add Buffer"

#: flatcamGUI/FlatCAMGUI.py:683 flatcamGUI/FlatCAMGUI.py:1911
msgid "Paint Shape"
msgstr "Paint Shape"

#: flatcamGUI/FlatCAMGUI.py:684 flatcamGUI/FlatCAMGUI.py:719
#: flatcamGUI/FlatCAMGUI.py:1912 flatcamGUI/FlatCAMGUI.py:1948
msgid "Eraser"
msgstr "Eraser"

#: flatcamGUI/FlatCAMGUI.py:687 flatcamGUI/FlatCAMGUI.py:1916
msgid "Polygon Union"
msgstr "Polygon Union"

#: flatcamGUI/FlatCAMGUI.py:689 flatcamGUI/FlatCAMGUI.py:1918
msgid "Polygon Intersection"
msgstr "Polygon Intersection"

#: flatcamGUI/FlatCAMGUI.py:691 flatcamGUI/FlatCAMGUI.py:1920
msgid "Polygon Subtraction"
msgstr "Polygon Subtraction"

#: flatcamGUI/FlatCAMGUI.py:694 flatcamGUI/FlatCAMGUI.py:1923
msgid "Cut Path"
msgstr "Cut Path"

#: flatcamGUI/FlatCAMGUI.py:695
msgid "Copy Shape(s)"
msgstr "Copy Shape(s)"

#: flatcamGUI/FlatCAMGUI.py:698
msgid "Delete Shape '-'"
msgstr "Delete Shape '-'"

#: flatcamGUI/FlatCAMGUI.py:700 flatcamGUI/FlatCAMGUI.py:726
#: flatcamGUI/FlatCAMGUI.py:1928 flatcamGUI/FlatCAMGUI.py:1955
msgid "Transformations"
msgstr "Transformations"

#: flatcamGUI/FlatCAMGUI.py:702
msgid "Move Objects "
msgstr "Move Objects "

#: flatcamGUI/FlatCAMGUI.py:706 flatcamGUI/FlatCAMGUI.py:1935
msgid "Add Pad"
msgstr "Add Pad"

#: flatcamGUI/FlatCAMGUI.py:708 flatcamGUI/FlatCAMGUI.py:1937
msgid "Add Track"
msgstr "Add Track"

#: flatcamGUI/FlatCAMGUI.py:709 flatcamGUI/FlatCAMGUI.py:1938
msgid "Add Region"
msgstr "Add Region"

#: flatcamGUI/FlatCAMGUI.py:711 flatcamGUI/FlatCAMGUI.py:1940
msgid "Poligonize"
msgstr "Poligonize"

#: flatcamGUI/FlatCAMGUI.py:713 flatcamGUI/FlatCAMGUI.py:1942
msgid "SemiDisc"
msgstr "SemiDisc"

#: flatcamGUI/FlatCAMGUI.py:714 flatcamGUI/FlatCAMGUI.py:1943
msgid "Disc"
msgstr "Disc"

#: flatcamGUI/FlatCAMGUI.py:728 flatcamGUI/FlatCAMGUI.py:1602
#: flatcamGUI/FlatCAMGUI.py:1622 flatcamGUI/FlatCAMGUI.py:1957
#: flatcamTools/ToolMove.py:26
msgid "Move"
msgstr "Move"

#: flatcamGUI/FlatCAMGUI.py:734 flatcamGUI/FlatCAMGUI.py:1963
msgid "Snap to grid"
msgstr "Snap to grid"

#: flatcamGUI/FlatCAMGUI.py:737 flatcamGUI/FlatCAMGUI.py:1966
msgid "Grid X snapping distance"
msgstr "Grid X snapping distance"

#: flatcamGUI/FlatCAMGUI.py:742 flatcamGUI/FlatCAMGUI.py:1971
msgid "Grid Y snapping distance"
msgstr "Grid Y snapping distance"

#: flatcamGUI/FlatCAMGUI.py:748 flatcamGUI/FlatCAMGUI.py:1977
msgid ""
"When active, value on Grid_X\n"
"is copied to the Grid_Y value."
msgstr ""
"When active, value on Grid_X\n"
"is copied to the Grid_Y value."

#: flatcamGUI/FlatCAMGUI.py:754 flatcamGUI/FlatCAMGUI.py:1983
msgid "Snap to corner"
msgstr "Snap to corner"

#: flatcamGUI/FlatCAMGUI.py:758 flatcamGUI/FlatCAMGUI.py:1987
#: flatcamGUI/FlatCAMGUI.py:3344
msgid "Max. magnet distance"
msgstr "Max. magnet distance"

#: flatcamGUI/FlatCAMGUI.py:786 flatcamGUI/FlatCAMGUI.py:1586
msgid "Project"
msgstr "Project"

#: flatcamGUI/FlatCAMGUI.py:796
msgid "Selected"
msgstr "Selected"

#: flatcamGUI/FlatCAMGUI.py:815 flatcamGUI/FlatCAMGUI.py:823
msgid "Plot Area"
msgstr "Plot Area"

#: flatcamGUI/FlatCAMGUI.py:847
msgid "General"
msgstr "General"

#: flatcamGUI/FlatCAMGUI.py:856
msgid "APP.  DEFAULTS"
msgstr "APP.  DEFAULTS"

#: flatcamGUI/FlatCAMGUI.py:857
msgid "PROJ. OPTIONS "
msgstr "PROJ. OPTIONS "

#: flatcamGUI/FlatCAMGUI.py:868
msgid "GERBER"
msgstr "GERBER"

#: flatcamGUI/FlatCAMGUI.py:877
msgid "EXCELLON"
msgstr "EXCELLON"

#: flatcamGUI/FlatCAMGUI.py:886
msgid "GEOMETRY"
msgstr "GEOMETRY"

#: flatcamGUI/FlatCAMGUI.py:896
msgid "CNC-JOB"
msgstr "CNC-JOB"

#: flatcamGUI/FlatCAMGUI.py:905
msgid "TOOLS"
msgstr "TOOLS"

#: flatcamGUI/FlatCAMGUI.py:922
msgid "Import Preferences"
msgstr "Import Preferences"

#: flatcamGUI/FlatCAMGUI.py:925
msgid ""
"Import a full set of FlatCAM settings from a file\n"
"previously saved on HDD.\n"
"\n"
"FlatCAM automatically save a 'factory_defaults' file\n"
"on the first start. Do not delete that file."
msgstr ""
"Import a full set of FlatCAM settings from a file\n"
"previously saved on HDD.\n"
"\n"
"FlatCAM automatically save a 'factory_defaults' file\n"
"on the first start. Do not delete that file."

#: flatcamGUI/FlatCAMGUI.py:932
msgid "Export Preferences"
msgstr "Export Preferences"

#: flatcamGUI/FlatCAMGUI.py:935
msgid ""
"Export a full set of FlatCAM settings in a file\n"
"that is saved on HDD."
msgstr ""
"Export a full set of FlatCAM settings in a file\n"
"that is saved on HDD."

#: flatcamGUI/FlatCAMGUI.py:940
msgid "Open Pref Folder"
msgstr "Open Pref Folder"

#: flatcamGUI/FlatCAMGUI.py:943
msgid "Open the folder where FlatCAM save the preferences files."
msgstr "Open the folder where FlatCAM save the preferences files."

#: flatcamGUI/FlatCAMGUI.py:951
msgid "Save Preferences"
msgstr "Save Preferences"

#: flatcamGUI/FlatCAMGUI.py:954
msgid ""
"Save the current settings in the 'current_defaults' file\n"
"which is the file storing the working default preferences."
msgstr ""
"Save the current settings in the 'current_defaults' file\n"
"which is the file storing the working default preferences."

#: flatcamGUI/FlatCAMGUI.py:980
msgid ""
"<b>General Shortcut list</b><br>\n"
"            <table border=\"0\" cellpadding=\"0\" cellspacing=\"0\" style="
"\"width:283px\">\n"
"                <tbody>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\" width=\"89\"><strong>F3</strong></"
"td>\n"
"                        <td width=\"194\"><span style=\"color:"
"#006400\"><strong>&nbsp;SHOW SHORTCUT LIST</strong></span></td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\">&nbsp;</td>\n"
"                        <td>&nbsp;</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>1</strong></td>\n"
"                        <td>&nbsp;Switch to Project Tab</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>2</strong></td>\n"
"                        <td>&nbsp;Switch to Selected Tab</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>3</strong></td>\n"
"                        <td>&nbsp;Switch to Tool Tab</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\">&nbsp;</td>\n"
"                        <td>&nbsp;</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>B</strong></td>\n"
"                        <td>&nbsp;New Gerber</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>E</strong></td>\n"
"                        <td>&nbsp;Edit Object (if selected)</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>G</strong></td>\n"
"                        <td>&nbsp;Grid On/Off</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>J</strong></td>\n"
"                        <td>&nbsp;Jump to Coordinates</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>L</strong></td>\n"
"                        <td>&nbsp;New Excellon</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>M</strong></td>\n"
"                        <td>&nbsp;Move Obj</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>N</strong></td>\n"
"                        <td>&nbsp;New Geometry</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>O</strong></td>\n"
"                        <td>&nbsp;Set Origin</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>Q</strong></td>\n"
"                        <td>&nbsp;Change Units</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>P</strong></td>\n"
"                        <td>&nbsp;Open Properties Tool</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>R</strong></td>\n"
"                        <td>&nbsp;Rotate by 90 degree CW</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>S</strong></td>\n"
"                        <td>&nbsp;Shell Toggle</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>T</strong></td>\n"
"                        <td>&nbsp;Add a Tool (when in Geometry Selected Tab "
"or in Tools NCC or Tools Paint)</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>V</strong></td>\n"
"                        <td>&nbsp;Zoom Fit</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>X</strong></td>\n"
"                        <td>&nbsp;Flip on X_axis</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>Y</strong></td>\n"
"                        <td>&nbsp;Flip on Y_axis</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>&#39;=&#39;</strong></td>\n"
"                        <td>&nbsp;Zoom Out</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>&#39;-&#39;</strong></td>\n"
"                        <td>&nbsp;Zoom In</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\">&nbsp;</td>\n"
"                        <td>&nbsp;</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>CTRL+A</strong></td>\n"
"                        <td>&nbsp;Select All</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>CTRL+C</strong></td>\n"
"                        <td>&nbsp;Copy Obj</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>CTRL+E</strong></td>\n"
"                        <td>&nbsp;Open Excellon File</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>CTRL+G</strong></td>\n"
"                        <td>&nbsp;Open Gerber File</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>CTRL+N</strong></td>\n"
"                        <td>&nbsp;New Project</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>CTRL+M</strong></td>\n"
"                        <td>&nbsp;Measurement Tool</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>CTRL+O</strong></td>\n"
"                        <td>&nbsp;Open Project</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>CTRL+S</strong></td>\n"
"                        <td>&nbsp;Save Project As</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>CTRL+F10</strong></td>\n"
"                        <td>&nbsp;Toggle Plot Area</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\">&nbsp;</td>\n"
"                        <td>&nbsp;</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>SHIFT+C</strong></td>\n"
"                        <td>&nbsp;Copy Obj_Name</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>SHIFT+E</strong></td>\n"
"                        <td>&nbsp;Toggle Code Editor</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>SHIFT+G</strong></td>\n"
"                        <td>&nbsp;Toggle the axis</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>SHIFT+P</strong></td>\n"
"                        <td>&nbsp;Open Preferences Window</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>SHIFT+R</strong></td>\n"
"                        <td>&nbsp;Rotate by 90 degree CCW</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>SHIFT+S</strong></td>\n"
"                        <td>&nbsp;Run a Script</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>SHIFT+W</strong></td>\n"
"                        <td>&nbsp;Toggle the workspace</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>SHIFT+X</strong></td>\n"
"                        <td>&nbsp;Skew on X axis</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>SHIFT+Y</strong></td>\n"
"                        <td>&nbsp;Skew on Y axis</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\">&nbsp;</td>\n"
"                        <td>&nbsp;</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>ALT+C</strong></td>\n"
"                        <td>&nbsp;Calculators Tool</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>ALT+D</strong></td>\n"
"                        <td>&nbsp;2-Sided PCB Tool</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>ALT+K</strong></td>\n"
"                        <td>&nbsp;Solder Paste Dispensing Tool</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>ALT+L</strong></td>\n"
"                        <td>&nbsp;Film PCB Tool</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>ALT+N</strong></td>\n"
"                        <td>&nbsp;Non-Copper Clearing Tool</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>ALT+P</strong></td>\n"
"                        <td>&nbsp;Paint Area Tool</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>ALT+Q</strong></td>\n"
"                        <td>&nbsp;PDF Import Tool</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>ALT+R</strong></td>\n"
"                        <td>&nbsp;Transformations Tool</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>ALT+S</strong></td>\n"
"                        <td>&nbsp;View File Source</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>ALT+U</strong></td>\n"
"                        <td>&nbsp;Cutout PCB Tool</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>ALT+1</strong></td>\n"
"                        <td>&nbsp;Enable all Plots</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>ALT+2</strong></td>\n"
"                        <td>&nbsp;Disable all Plots</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>ALT+3</strong></td>\n"
"                        <td>&nbsp;Disable Non-selected Plots</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>ALT+F10</strong></td>\n"
"                        <td>&nbsp;Toggle Full Screen</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\">&nbsp;</td>\n"
"                        <td>&nbsp;</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>F1</strong></td>\n"
"                        <td>&nbsp;Open Online Manual</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>F4</strong></td>\n"
"                        <td>&nbsp;Open Online Tutorials</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>Del</strong></td>\n"
"                        <td>&nbsp;Delete Object</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>Del</strong></td>\n"
"                        <td>&nbsp;Alternate: Delete Tool</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>'`'</strong></td>\n"
"                        <td>&nbsp;(left to Key_1)Toogle Notebook Area (Left "
"Side)</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>SPACE</strong></td>\n"
"                        <td>&nbsp;En(Dis)able Obj Plot</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>Escape</strong></td>\n"
"                        <td>&nbsp;Deselects all objects</td>\n"
"                    </tr>\n"
"                </tbody>\n"
"            </table>\n"
"    \n"
"            "
msgstr ""
"<b>General Shortcut list</b><br>\n"
"            <table border=\"0\" cellpadding=\"0\" cellspacing=\"0\" style="
"\"width:283px\">\n"
"                <tbody>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\" width=\"89\"><strong>F3</strong></"
"td>\n"
"                        <td width=\"194\"><span style=\"color:"
"#006400\"><strong>&nbsp;SHOW SHORTCUT LIST</strong></span></td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\">&nbsp;</td>\n"
"                        <td>&nbsp;</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>1</strong></td>\n"
"                        <td>&nbsp;Switch to Project Tab</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>2</strong></td>\n"
"                        <td>&nbsp;Switch to Selected Tab</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>3</strong></td>\n"
"                        <td>&nbsp;Switch to Tool Tab</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\">&nbsp;</td>\n"
"                        <td>&nbsp;</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>B</strong></td>\n"
"                        <td>&nbsp;New Gerber</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>E</strong></td>\n"
"                        <td>&nbsp;Edit Object (if selected)</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>G</strong></td>\n"
"                        <td>&nbsp;Grid On/Off</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>J</strong></td>\n"
"                        <td>&nbsp;Jump to Coordinates</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>L</strong></td>\n"
"                        <td>&nbsp;New Excellon</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>M</strong></td>\n"
"                        <td>&nbsp;Move Obj</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>N</strong></td>\n"
"                        <td>&nbsp;New Geometry</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>O</strong></td>\n"
"                        <td>&nbsp;Set Origin</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>Q</strong></td>\n"
"                        <td>&nbsp;Change Units</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>P</strong></td>\n"
"                        <td>&nbsp;Open Properties Tool</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>R</strong></td>\n"
"                        <td>&nbsp;Rotate by 90 degree CW</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>S</strong></td>\n"
"                        <td>&nbsp;Shell Toggle</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>T</strong></td>\n"
"                        <td>&nbsp;Add a Tool (when in Geometry Selected Tab "
"or in Tools NCC or Tools Paint)</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>V</strong></td>\n"
"                        <td>&nbsp;Zoom Fit</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>X</strong></td>\n"
"                        <td>&nbsp;Flip on X_axis</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>Y</strong></td>\n"
"                        <td>&nbsp;Flip on Y_axis</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>&#39;=&#39;</strong></td>\n"
"                        <td>&nbsp;Zoom Out</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>&#39;-&#39;</strong></td>\n"
"                        <td>&nbsp;Zoom In</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\">&nbsp;</td>\n"
"                        <td>&nbsp;</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>CTRL+A</strong></td>\n"
"                        <td>&nbsp;Select All</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>CTRL+C</strong></td>\n"
"                        <td>&nbsp;Copy Obj</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>CTRL+E</strong></td>\n"
"                        <td>&nbsp;Open Excellon File</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>CTRL+G</strong></td>\n"
"                        <td>&nbsp;Open Gerber File</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>CTRL+N</strong></td>\n"
"                        <td>&nbsp;New Project</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>CTRL+M</strong></td>\n"
"                        <td>&nbsp;Measurement Tool</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>CTRL+O</strong></td>\n"
"                        <td>&nbsp;Open Project</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>CTRL+S</strong></td>\n"
"                        <td>&nbsp;Save Project As</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>CTRL+F10</strong></td>\n"
"                        <td>&nbsp;Toggle Plot Area</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\">&nbsp;</td>\n"
"                        <td>&nbsp;</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>SHIFT+C</strong></td>\n"
"                        <td>&nbsp;Copy Obj_Name</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>SHIFT+E</strong></td>\n"
"                        <td>&nbsp;Toggle Code Editor</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>SHIFT+G</strong></td>\n"
"                        <td>&nbsp;Toggle the axis</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>SHIFT+P</strong></td>\n"
"                        <td>&nbsp;Open Preferences Window</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>SHIFT+R</strong></td>\n"
"                        <td>&nbsp;Rotate by 90 degree CCW</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>SHIFT+S</strong></td>\n"
"                        <td>&nbsp;Run a Script</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>SHIFT+W</strong></td>\n"
"                        <td>&nbsp;Toggle the workspace</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>SHIFT+X</strong></td>\n"
"                        <td>&nbsp;Skew on X axis</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>SHIFT+Y</strong></td>\n"
"                        <td>&nbsp;Skew on Y axis</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\">&nbsp;</td>\n"
"                        <td>&nbsp;</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>ALT+C</strong></td>\n"
"                        <td>&nbsp;Calculators Tool</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>ALT+D</strong></td>\n"
"                        <td>&nbsp;2-Sided PCB Tool</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>ALT+K</strong></td>\n"
"                        <td>&nbsp;Solder Paste Dispensing Tool</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>ALT+L</strong></td>\n"
"                        <td>&nbsp;Film PCB Tool</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>ALT+N</strong></td>\n"
"                        <td>&nbsp;Non-Copper Clearing Tool</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>ALT+P</strong></td>\n"
"                        <td>&nbsp;Paint Area Tool</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>ALT+Q</strong></td>\n"
"                        <td>&nbsp;PDF Import Tool</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>ALT+R</strong></td>\n"
"                        <td>&nbsp;Transformations Tool</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>ALT+S</strong></td>\n"
"                        <td>&nbsp;View File Source</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>ALT+U</strong></td>\n"
"                        <td>&nbsp;Cutout PCB Tool</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>ALT+1</strong></td>\n"
"                        <td>&nbsp;Enable all Plots</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>ALT+2</strong></td>\n"
"                        <td>&nbsp;Disable all Plots</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>ALT+3</strong></td>\n"
"                        <td>&nbsp;Disable Non-selected Plots</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>ALT+F10</strong></td>\n"
"                        <td>&nbsp;Toggle Full Screen</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\">&nbsp;</td>\n"
"                        <td>&nbsp;</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>F1</strong></td>\n"
"                        <td>&nbsp;Open Online Manual</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>F4</strong></td>\n"
"                        <td>&nbsp;Open Online Tutorials</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>Del</strong></td>\n"
"                        <td>&nbsp;Delete Object</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>Del</strong></td>\n"
"                        <td>&nbsp;Alternate: Delete Tool</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>'`'</strong></td>\n"
"                        <td>&nbsp;(left to Key_1)Toogle Notebook Area (Left "
"Side)</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>SPACE</strong></td>\n"
"                        <td>&nbsp;En(Dis)able Obj Plot</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>Escape</strong></td>\n"
"                        <td>&nbsp;Deselects all objects</td>\n"
"                    </tr>\n"
"                </tbody>\n"
"            </table>\n"
"    \n"
"            "

#: flatcamGUI/FlatCAMGUI.py:1265
msgid ""
"<b>Editor Shortcut list</b><br>\n"
"            <br>\n"
"            <strong><span style=\"color:#0000ff\">GEOMETRY EDITOR</span></"
"strong><br>\n"
"    \n"
"            <table border=\"0\" cellpadding=\"0\" cellspacing=\"0\" style="
"\"width:283px\">\n"
"                <tbody>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\" width=\"89\"><strong>A</strong></"
"td>\n"
"                        <td width=\"194\">&nbsp;Draw an Arc</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>B</strong></td>\n"
"                        <td>&nbsp;Buffer Tool</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>C</strong></td>\n"
"                        <td>&nbsp;Copy Geo Item</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>D</strong></td>\n"
"                        <td>&nbsp;Within Add Arc will toogle the ARC "
"direction: CW or CCW</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>E</strong></td>\n"
"                        <td>&nbsp;Polygon Intersection Tool</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>I</strong></td>\n"
"                        <td>&nbsp;Paint Tool</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>J</strong></td>\n"
"                        <td>&nbsp;Jump to Location (x, y)</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>K</strong></td>\n"
"                        <td>&nbsp;Toggle Corner Snap</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>M</strong></td>\n"
"                        <td>&nbsp;Move Geo Item</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>M</strong></td>\n"
"                        <td>&nbsp;Within Add Arc will cycle through the ARC "
"modes</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>N</strong></td>\n"
"                        <td>&nbsp;Draw a Polygon</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>O</strong></td>\n"
"                        <td>&nbsp;Draw a Circle</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>P</strong></td>\n"
"                        <td>&nbsp;Draw a Path</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>R</strong></td>\n"
"                        <td>&nbsp;Draw Rectangle</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>S</strong></td>\n"
"                        <td>&nbsp;Polygon Substraction Tool</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>T</strong></td>\n"
"                        <td>&nbsp;Add Text Tool</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>U</strong></td>\n"
"                        <td>&nbsp;Polygon Union Tool</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>X</strong></td>\n"
"                        <td>&nbsp;Flip shape on X axis</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>Y</strong></td>\n"
"                        <td>&nbsp;Flip shape on Y axis</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\">&nbsp;</td>\n"
"                        <td>&nbsp;</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>SHIFT+X</strong></td>\n"
"                        <td>&nbsp;Skew shape on X axis</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>SHIFT+Y</strong></td>\n"
"                        <td>&nbsp;Skew shape on Y axis</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\">&nbsp;</td>\n"
"                        <td>&nbsp;</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>ALT+R</strong></td>\n"
"                        <td>&nbsp;Editor Transformation Tool</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>ALT+X</strong></td>\n"
"                        <td>&nbsp;Offset shape on X axis</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>ALT+Y</strong></td>\n"
"                        <td>&nbsp;Offset shape on Y axis</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\">&nbsp;</td>\n"
"                        <td>&nbsp;</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>CTRL+M</strong></td>\n"
"                        <td>&nbsp;Measurement Tool</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>CTRL+S</strong></td>\n"
"                        <td>&nbsp;Save Object and Exit Editor</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>CTRL+X</strong></td>\n"
"                        <td>&nbsp;Polygon Cut Tool</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\">&nbsp;</td>\n"
"                        <td>&nbsp;</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>Space</strong></td>\n"
"                        <td>&nbsp;Rotate Geometry</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>ENTER</strong></td>\n"
"                        <td>&nbsp;Finish drawing for certain tools</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>ESC</strong></td>\n"
"                        <td>&nbsp;Abort and return to Select</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>Del</strong></td>\n"
"                        <td>&nbsp;Delete Shape</td>\n"
"                    </tr>\n"
"                </tbody>\n"
"            </table>\n"
"            <br>\n"
"            <br>\n"
"            <strong><span style=\"color:#ff0000\">EXCELLON EDITOR</span></"
"strong><br>\n"
"            <table border=\"0\" cellpadding=\"0\" cellspacing=\"0\" style="
"\"width:283px\">\n"
"                <tbody>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\" width=\"89\"><strong>A</strong></"
"td>\n"
"                        <td width=\"194\">&nbsp;Add Drill Array</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>C</strong></td>\n"
"                        <td>&nbsp;Copy Drill(s)</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>D</strong></td>\n"
"                        <td>&nbsp;Add Drill</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>J</strong></td>\n"
"                        <td>&nbsp;Jump to Location (x, y)</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>M</strong></td>\n"
"                        <td>&nbsp;Move Drill(s)</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>R</strong></td>\n"
"                        <td>&nbsp;Resize Drill(s)</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>T</strong></td>\n"
"                        <td>&nbsp;Add a new Tool</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\">&nbsp;</td>\n"
"                        <td>&nbsp;</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>Del</strong></td>\n"
"                        <td>&nbsp;Delete Drill(s)</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>Del</strong></td>\n"
"                        <td>&nbsp;Alternate: Delete Tool(s)</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\">&nbsp;</td>\n"
"                        <td>&nbsp;</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>ESC</strong></td>\n"
"                        <td>&nbsp;Abort and return to Select</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>CTRL+S</strong></td>\n"
"                        <td>&nbsp;Save Object and Exit Editor</td>\n"
"                    </tr>\n"
"                </tbody>\n"
"            </table>\n"
"            <br>\n"
"            <br>\n"
"            <strong><span style=\"color:#00ff00\">GERBER EDITOR</span></"
"strong><br>\n"
"            <table border=\"0\" cellpadding=\"0\" cellspacing=\"0\" style="
"\"width:283px\">\n"
"                <tbody>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\" width=\"89\"><strong>A</strong></"
"td>\n"
"                        <td width=\"194\">&nbsp;Add Pad Array</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>B</strong></td>\n"
"                        <td>&nbsp;Buffer</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>C</strong></td>\n"
"                        <td>&nbsp;Copy</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>D</strong></td>\n"
"                        <td>&nbsp;Add Disc</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>E</strong></td>\n"
"                        <td>&nbsp;Add SemiDisc</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>J</strong></td>\n"
"                        <td>&nbsp;Jump to Location (x, y)</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>M</strong></td>\n"
"                        <td>&nbsp;Move</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>N</strong></td>\n"
"                        <td>&nbsp;Add Region</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>P</strong></td>\n"
"                        <td>&nbsp;Add Pad</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>R</strong></td>\n"
"                        <td>&nbsp;Within Track & Region Tools will cycle in "
"REVERSE the bend modes</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>S</strong></td>\n"
"                        <td>&nbsp;Scale</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>T</strong></td>\n"
"                        <td>&nbsp;Add Track</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>T</strong></td>\n"
"                        <td>&nbsp;Within Track & Region Tools will cycle "
"FORWARD the bend modes</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\">&nbsp;</td>\n"
"                        <td>&nbsp;</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>Del</strong></td>\n"
"                        <td>&nbsp;Delete</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>Del</strong></td>\n"
"                        <td>&nbsp;Alternate: Delete Apertures</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\">&nbsp;</td>\n"
"                        <td>&nbsp;</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>ESC</strong></td>\n"
"                        <td>&nbsp;Abort and return to Select</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>CTRL+S</strong></td>\n"
"                        <td>&nbsp;Save Object and Exit Editor</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\">&nbsp;</td>\n"
"                        <td>&nbsp;</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>ALT+R</strong></td>\n"
"                        <td>&nbsp;Transformation Tool</td>\n"
"                    </tr>\n"
"                </tbody>\n"
"            </table>\n"
"                    "
msgstr ""
"<b>Editor Shortcut list</b><br>\n"
"            <br>\n"
"            <strong><span style=\"color:#0000ff\">GEOMETRY EDITOR</span></"
"strong><br>\n"
"    \n"
"            <table border=\"0\" cellpadding=\"0\" cellspacing=\"0\" style="
"\"width:283px\">\n"
"                <tbody>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\" width=\"89\"><strong>A</strong></"
"td>\n"
"                        <td width=\"194\">&nbsp;Draw an Arc</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>B</strong></td>\n"
"                        <td>&nbsp;Buffer Tool</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>C</strong></td>\n"
"                        <td>&nbsp;Copy Geo Item</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>D</strong></td>\n"
"                        <td>&nbsp;Within Add Arc will toogle the ARC "
"direction: CW or CCW</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>E</strong></td>\n"
"                        <td>&nbsp;Polygon Intersection Tool</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>I</strong></td>\n"
"                        <td>&nbsp;Paint Tool</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>J</strong></td>\n"
"                        <td>&nbsp;Jump to Location (x, y)</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>K</strong></td>\n"
"                        <td>&nbsp;Toggle Corner Snap</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>M</strong></td>\n"
"                        <td>&nbsp;Move Geo Item</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>M</strong></td>\n"
"                        <td>&nbsp;Within Add Arc will cycle through the ARC "
"modes</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>N</strong></td>\n"
"                        <td>&nbsp;Draw a Polygon</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>O</strong></td>\n"
"                        <td>&nbsp;Draw a Circle</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>P</strong></td>\n"
"                        <td>&nbsp;Draw a Path</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>R</strong></td>\n"
"                        <td>&nbsp;Draw Rectangle</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>S</strong></td>\n"
"                        <td>&nbsp;Polygon Substraction Tool</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>T</strong></td>\n"
"                        <td>&nbsp;Add Text Tool</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>U</strong></td>\n"
"                        <td>&nbsp;Polygon Union Tool</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>X</strong></td>\n"
"                        <td>&nbsp;Flip shape on X axis</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>Y</strong></td>\n"
"                        <td>&nbsp;Flip shape on Y axis</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\">&nbsp;</td>\n"
"                        <td>&nbsp;</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>SHIFT+X</strong></td>\n"
"                        <td>&nbsp;Skew shape on X axis</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>SHIFT+Y</strong></td>\n"
"                        <td>&nbsp;Skew shape on Y axis</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\">&nbsp;</td>\n"
"                        <td>&nbsp;</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>ALT+R</strong></td>\n"
"                        <td>&nbsp;Editor Transformation Tool</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>ALT+X</strong></td>\n"
"                        <td>&nbsp;Offset shape on X axis</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>ALT+Y</strong></td>\n"
"                        <td>&nbsp;Offset shape on Y axis</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\">&nbsp;</td>\n"
"                        <td>&nbsp;</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>CTRL+M</strong></td>\n"
"                        <td>&nbsp;Measurement Tool</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>CTRL+S</strong></td>\n"
"                        <td>&nbsp;Save Object and Exit Editor</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>CTRL+X</strong></td>\n"
"                        <td>&nbsp;Polygon Cut Tool</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\">&nbsp;</td>\n"
"                        <td>&nbsp;</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>Space</strong></td>\n"
"                        <td>&nbsp;Rotate Geometry</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>ENTER</strong></td>\n"
"                        <td>&nbsp;Finish drawing for certain tools</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>ESC</strong></td>\n"
"                        <td>&nbsp;Abort and return to Select</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>Del</strong></td>\n"
"                        <td>&nbsp;Delete Shape</td>\n"
"                    </tr>\n"
"                </tbody>\n"
"            </table>\n"
"            <br>\n"
"            <br>\n"
"            <strong><span style=\"color:#ff0000\">EXCELLON EDITOR</span></"
"strong><br>\n"
"            <table border=\"0\" cellpadding=\"0\" cellspacing=\"0\" style="
"\"width:283px\">\n"
"                <tbody>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\" width=\"89\"><strong>A</strong></"
"td>\n"
"                        <td width=\"194\">&nbsp;Add Drill Array</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>C</strong></td>\n"
"                        <td>&nbsp;Copy Drill(s)</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>D</strong></td>\n"
"                        <td>&nbsp;Add Drill</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>J</strong></td>\n"
"                        <td>&nbsp;Jump to Location (x, y)</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>M</strong></td>\n"
"                        <td>&nbsp;Move Drill(s)</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>R</strong></td>\n"
"                        <td>&nbsp;Resize Drill(s)</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>T</strong></td>\n"
"                        <td>&nbsp;Add a new Tool</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\">&nbsp;</td>\n"
"                        <td>&nbsp;</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>Del</strong></td>\n"
"                        <td>&nbsp;Delete Drill(s)</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>Del</strong></td>\n"
"                        <td>&nbsp;Alternate: Delete Tool(s)</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\">&nbsp;</td>\n"
"                        <td>&nbsp;</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>ESC</strong></td>\n"
"                        <td>&nbsp;Abort and return to Select</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>CTRL+S</strong></td>\n"
"                        <td>&nbsp;Save Object and Exit Editor</td>\n"
"                    </tr>\n"
"                </tbody>\n"
"            </table>\n"
"            <br>\n"
"            <br>\n"
"            <strong><span style=\"color:#00ff00\">GERBER EDITOR</span></"
"strong><br>\n"
"            <table border=\"0\" cellpadding=\"0\" cellspacing=\"0\" style="
"\"width:283px\">\n"
"                <tbody>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\" width=\"89\"><strong>A</strong></"
"td>\n"
"                        <td width=\"194\">&nbsp;Add Pad Array</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>B</strong></td>\n"
"                        <td>&nbsp;Buffer</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>C</strong></td>\n"
"                        <td>&nbsp;Copy</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>D</strong></td>\n"
"                        <td>&nbsp;Add Disc</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>E</strong></td>\n"
"                        <td>&nbsp;Add SemiDisc</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>J</strong></td>\n"
"                        <td>&nbsp;Jump to Location (x, y)</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>M</strong></td>\n"
"                        <td>&nbsp;Move</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>N</strong></td>\n"
"                        <td>&nbsp;Add Region</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>P</strong></td>\n"
"                        <td>&nbsp;Add Pad</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>R</strong></td>\n"
"                        <td>&nbsp;Within Track & Region Tools will cycle in "
"REVERSE the bend modes</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>S</strong></td>\n"
"                        <td>&nbsp;Scale</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>T</strong></td>\n"
"                        <td>&nbsp;Add Track</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>T</strong></td>\n"
"                        <td>&nbsp;Within Track & Region Tools will cycle "
"FORWARD the bend modes</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\">&nbsp;</td>\n"
"                        <td>&nbsp;</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>Del</strong></td>\n"
"                        <td>&nbsp;Delete</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>Del</strong></td>\n"
"                        <td>&nbsp;Alternate: Delete Apertures</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\">&nbsp;</td>\n"
"                        <td>&nbsp;</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>ESC</strong></td>\n"
"                        <td>&nbsp;Abort and return to Select</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>CTRL+S</strong></td>\n"
"                        <td>&nbsp;Save Object and Exit Editor</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\">&nbsp;</td>\n"
"                        <td>&nbsp;</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>ALT+R</strong></td>\n"
"                        <td>&nbsp;Transformation Tool</td>\n"
"                    </tr>\n"
"                </tbody>\n"
"            </table>\n"
"                    "

#: flatcamGUI/FlatCAMGUI.py:1578
#| msgid "Toggle Units\tQ"
msgid "Toggle Panel"
msgstr "Toggle Panel"

#: flatcamGUI/FlatCAMGUI.py:1581
msgid "New"
msgstr "New"

#: flatcamGUI/FlatCAMGUI.py:1582
msgid "Geometry"
msgstr "Geometry"

#: flatcamGUI/FlatCAMGUI.py:1584
msgid "Excellon"
msgstr "Excellon"

#: flatcamGUI/FlatCAMGUI.py:1589
msgid "Grids"
msgstr "Grids"

#: flatcamGUI/FlatCAMGUI.py:1591
msgid "View"
msgstr "View"

#: flatcamGUI/FlatCAMGUI.py:1593
msgid "Clear Plot"
msgstr "Clear Plot"

#: flatcamGUI/FlatCAMGUI.py:1594
msgid "Replot"
msgstr "Replot"

#: flatcamGUI/FlatCAMGUI.py:1597
msgid "Geo Editor"
msgstr "Geo Editor"

#: flatcamGUI/FlatCAMGUI.py:1598
msgid "Line"
msgstr "Line"

#: flatcamGUI/FlatCAMGUI.py:1599
msgid "Rectangle"
msgstr "Rectangle"

#: flatcamGUI/FlatCAMGUI.py:1600
msgid "Cut"
msgstr "Cut"

#: flatcamGUI/FlatCAMGUI.py:1605
msgid "Pad"
msgstr "Pad"

#: flatcamGUI/FlatCAMGUI.py:1606
msgid "Pad Array"
msgstr "Pad Array"

#: flatcamGUI/FlatCAMGUI.py:1607
msgid "Track"
msgstr "Track"

#: flatcamGUI/FlatCAMGUI.py:1608
msgid "Region"
msgstr "Region"

#: flatcamGUI/FlatCAMGUI.py:1610
msgid "Exc Editor"
msgstr "Exc Editor"

#: flatcamGUI/FlatCAMGUI.py:1611
msgid "Add Drill"
msgstr "Add Drill"

#: flatcamGUI/FlatCAMGUI.py:1643
msgid "Print Preview"
msgstr "Print Preview"

#: flatcamGUI/FlatCAMGUI.py:1644
msgid "Print Code"
msgstr "Print Code"

#: flatcamGUI/FlatCAMGUI.py:1645
msgid "Find in Code"
msgstr "Find in Code"

#: flatcamGUI/FlatCAMGUI.py:1650
msgid "Replace With"
msgstr "Replace With"

#: flatcamGUI/FlatCAMGUI.py:1654
msgid "All"
msgstr "All"

#: flatcamGUI/FlatCAMGUI.py:1656
msgid ""
"When checked it will replace all instances in the 'Find' box\n"
"with the text in the 'Replace' box.."
msgstr ""
"When checked it will replace all instances in the 'Find' box\n"
"with the text in the 'Replace' box.."

#: flatcamGUI/FlatCAMGUI.py:1659
msgid "Open Code"
msgstr "Open Code"

#: flatcamGUI/FlatCAMGUI.py:1660
msgid "Save Code"
msgstr "Save Code"

#: flatcamGUI/FlatCAMGUI.py:1695
msgid ""
"Relative neasurement.\n"
"Reference is last click position"
msgstr ""
"Relative neasurement.\n"
"Reference is last click position"

#: flatcamGUI/FlatCAMGUI.py:1701
msgid ""
"Absolute neasurement.\n"
"Reference is (X=0, Y= 0) position"
msgstr ""
"Absolute neasurement.\n"
"Reference is (X=0, Y= 0) position"

#: flatcamGUI/FlatCAMGUI.py:1897
msgid "Select 'Esc'"
msgstr "Select 'Esc'"

#: flatcamGUI/FlatCAMGUI.py:1924
msgid "Copy Objects"
msgstr "Copy Objects"

#: flatcamGUI/FlatCAMGUI.py:1926
msgid "Delete Shape"
msgstr "Delete Shape"

#: flatcamGUI/FlatCAMGUI.py:1931
msgid "Move Objects"
msgstr "Move Objects"

#: flatcamGUI/FlatCAMGUI.py:2360
msgid ""
"Please first select a geometry item to be cutted\n"
"then select the geometry item that will be cutted\n"
"out of the first item. In the end press ~X~ key or\n"
"the toolbar button."
msgstr ""
"Please first select a geometry item to be cutted\n"
"then select the geometry item that will be cutted\n"
"out of the first item. In the end press ~X~ key or\n"
"the toolbar button."

#: flatcamGUI/FlatCAMGUI.py:2367 flatcamGUI/FlatCAMGUI.py:2504
#: flatcamGUI/FlatCAMGUI.py:2563 flatcamGUI/FlatCAMGUI.py:2583
msgid "Warning"
msgstr "Warning"

#: flatcamGUI/FlatCAMGUI.py:2434 flatcamGUI/FlatCAMGUI.py:2633
#: flatcamGUI/FlatCAMGUI.py:2844
msgid "[WARNING_NOTCL] Cancelled."
msgstr "[WARNING_NOTCL] Cancelled."

#: flatcamGUI/FlatCAMGUI.py:2499
msgid ""
"Please select geometry items \n"
"on which to perform Intersection Tool."
msgstr ""
"Please select geometry items \n"
"on which to perform Intersection Tool."

#: flatcamGUI/FlatCAMGUI.py:2558
msgid ""
"Please select geometry items \n"
"on which to perform Substraction Tool."
msgstr ""
"Please select geometry items \n"
"on which to perform Substraction Tool."

#: flatcamGUI/FlatCAMGUI.py:2578
msgid ""
"Please select geometry items \n"
"on which to perform union."
msgstr ""
"Please select geometry items \n"
"on which to perform union."

#: flatcamGUI/FlatCAMGUI.py:2649 flatcamGUI/FlatCAMGUI.py:2861
msgid "[WARNING_NOTCL] Cancelled. Nothing selected to delete."
msgstr "[WARNING_NOTCL] Cancelled. Nothing selected to delete."

#: flatcamGUI/FlatCAMGUI.py:2733 flatcamGUI/FlatCAMGUI.py:2928
msgid "[WARNING_NOTCL] Cancelled. Nothing selected to copy."
msgstr "[WARNING_NOTCL] Cancelled. Nothing selected to copy."

#: flatcamGUI/FlatCAMGUI.py:2779 flatcamGUI/FlatCAMGUI.py:2974
msgid "[WARNING_NOTCL] Cancelled. Nothing selected to move."
msgstr "[WARNING_NOTCL] Cancelled. Nothing selected to move."

#: flatcamGUI/FlatCAMGUI.py:2988
msgid "New Tool ..."
msgstr "New Tool ..."

#: flatcamGUI/FlatCAMGUI.py:2989
msgid "Enter a Tool Diameter:"
msgstr "Enter a Tool Diameter:"

#: flatcamGUI/FlatCAMGUI.py:3032
msgid "Measurement Tool exit..."
msgstr "Measurement Tool exit..."

#: flatcamGUI/FlatCAMGUI.py:3329
msgid "Grid X value:"
msgstr "Grid X value:"

#: flatcamGUI/FlatCAMGUI.py:3331
msgid "This is the Grid snap value on X axis."
msgstr "This is the Grid snap value on X axis."

#: flatcamGUI/FlatCAMGUI.py:3336
msgid "Grid Y value:"
msgstr "Grid Y value:"

#: flatcamGUI/FlatCAMGUI.py:3338
msgid "This is the Grid snap value on Y axis."
msgstr "This is the Grid snap value on Y axis."

#: flatcamGUI/FlatCAMGUI.py:3343
msgid "Snap Max:"
msgstr "Snap Max:"

#: flatcamGUI/FlatCAMGUI.py:3348
msgid "Workspace:"
msgstr "Workspace:"

#: flatcamGUI/FlatCAMGUI.py:3350
msgid ""
"Draw a delimiting rectangle on canvas.\n"
"The purpose is to illustrate the limits for our work."
msgstr ""
"Draw a delimiting rectangle on canvas.\n"
"The purpose is to illustrate the limits for our work."

#: flatcamGUI/FlatCAMGUI.py:3353
msgid "Wk. format:"
msgstr "Wk. format:"

#: flatcamGUI/FlatCAMGUI.py:3355
msgid ""
"Select the type of rectangle to be used on canvas,\n"
"as valid workspace."
msgstr ""
"Select the type of rectangle to be used on canvas,\n"
"as valid workspace."

#: flatcamGUI/FlatCAMGUI.py:3368
msgid "Plot Fill:"
msgstr "Plot Fill:"

#: flatcamGUI/FlatCAMGUI.py:3370
msgid ""
"Set the fill color for plotted objects.\n"
"First 6 digits are the color and the last 2\n"
"digits are for alpha (transparency) level."
msgstr ""
"Set the fill color for plotted objects.\n"
"First 6 digits are the color and the last 2\n"
"digits are for alpha (transparency) level."

#: flatcamGUI/FlatCAMGUI.py:3384 flatcamGUI/FlatCAMGUI.py:3434
#: flatcamGUI/FlatCAMGUI.py:3484
msgid "Alpha Level:"
msgstr "Alpha Level:"

#: flatcamGUI/FlatCAMGUI.py:3386
msgid "Set the fill transparency for plotted objects."
msgstr "Set the fill transparency for plotted objects."

#: flatcamGUI/FlatCAMGUI.py:3403
msgid "Plot Line:"
msgstr "Plot Line:"

#: flatcamGUI/FlatCAMGUI.py:3405
msgid "Set the line color for plotted objects."
msgstr "Set the line color for plotted objects."

#: flatcamGUI/FlatCAMGUI.py:3417
msgid "Sel. Fill:"
msgstr "Sel. Fill:"

#: flatcamGUI/FlatCAMGUI.py:3419
msgid ""
"Set the fill color for the selection box\n"
"in case that the selection is done from left to right.\n"
"First 6 digits are the color and the last 2\n"
"digits are for alpha (transparency) level."
msgstr ""
"Set the fill color for the selection box\n"
"in case that the selection is done from left to right.\n"
"First 6 digits are the color and the last 2\n"
"digits are for alpha (transparency) level."

#: flatcamGUI/FlatCAMGUI.py:3436
msgid "Set the fill transparency for the 'left to right' selection box."
msgstr "Set the fill transparency for the 'left to right' selection box."

#: flatcamGUI/FlatCAMGUI.py:3453
msgid "Sel. Line:"
msgstr "Sel. Line:"

#: flatcamGUI/FlatCAMGUI.py:3455
msgid "Set the line color for the 'left to right' selection box."
msgstr "Set the line color for the 'left to right' selection box."

#: flatcamGUI/FlatCAMGUI.py:3467
msgid "Sel2. Fill:"
msgstr "Sel2. Fill:"

#: flatcamGUI/FlatCAMGUI.py:3469
msgid ""
"Set the fill color for the selection box\n"
"in case that the selection is done from right to left.\n"
"First 6 digits are the color and the last 2\n"
"digits are for alpha (transparency) level."
msgstr ""
"Set the fill color for the selection box\n"
"in case that the selection is done from right to left.\n"
"First 6 digits are the color and the last 2\n"
"digits are for alpha (transparency) level."

#: flatcamGUI/FlatCAMGUI.py:3486
msgid "Set the fill transparency for selection 'right to left' box."
msgstr "Set the fill transparency for selection 'right to left' box."

#: flatcamGUI/FlatCAMGUI.py:3503
msgid "Sel2. Line:"
msgstr "Sel2. Line:"

#: flatcamGUI/FlatCAMGUI.py:3505
msgid "Set the line color for the 'right to left' selection box."
msgstr "Set the line color for the 'right to left' selection box."

#: flatcamGUI/FlatCAMGUI.py:3517
msgid "Editor Draw:"
msgstr "Editor Draw:"

#: flatcamGUI/FlatCAMGUI.py:3519
msgid "Set the color for the shape."
msgstr "Set the color for the shape."

#: flatcamGUI/FlatCAMGUI.py:3531
msgid "Editor Draw Sel.:"
msgstr "Editor Draw Sel.:"

#: flatcamGUI/FlatCAMGUI.py:3533
msgid "Set the color of the shape when selected."
msgstr "Set the color of the shape when selected."

#: flatcamGUI/FlatCAMGUI.py:3545
msgid "Project Items:"
msgstr "Project Items:"

#: flatcamGUI/FlatCAMGUI.py:3547
msgid "Set the color of the items in Project Tab Tree."
msgstr "Set the color of the items in Project Tab Tree."

#: flatcamGUI/FlatCAMGUI.py:3558
msgid "Proj. Dis. Items:"
msgstr "Proj. Dis. Items:"

#: flatcamGUI/FlatCAMGUI.py:3560
msgid ""
"Set the color of the items in Project Tab Tree,\n"
"for the case when the items are disabled."
msgstr ""
"Set the color of the items in Project Tab Tree,\n"
"for the case when the items are disabled."

#: flatcamGUI/FlatCAMGUI.py:3611
msgid "GUI Settings"
msgstr "GUI Settings"

#: flatcamGUI/FlatCAMGUI.py:3617
msgid "Layout:"
msgstr "Layout:"

#: flatcamGUI/FlatCAMGUI.py:3619
msgid ""
"Select an layout for FlatCAM.\n"
"It is applied immediately."
msgstr ""
"Select an layout for FlatCAM.\n"
"It is applied immediately."

#: flatcamGUI/FlatCAMGUI.py:3635
msgid "Style:"
msgstr "Style:"

#: flatcamGUI/FlatCAMGUI.py:3637
msgid ""
"Select an style for FlatCAM.\n"
"It will be applied at the next app start."
msgstr ""
"Select an style for FlatCAM.\n"
"It will be applied at the next app start."

#: flatcamGUI/FlatCAMGUI.py:3648
msgid "HDPI Support:"
msgstr "HDPI Support:"

#: flatcamGUI/FlatCAMGUI.py:3650
msgid ""
"Enable High DPI support for FlatCAM.\n"
"It will be applied at the next app start."
msgstr ""
"Enable High DPI support for FlatCAM.\n"
"It will be applied at the next app start."

#: flatcamGUI/FlatCAMGUI.py:3663
msgid "Clear GUI Settings:"
msgstr "Clear GUI Settings:"

#: flatcamGUI/FlatCAMGUI.py:3665
msgid ""
"Clear the GUI settings for FlatCAM,\n"
"such as: layout, gui state, style, hdpi support etc."
msgstr ""
"Clear the GUI settings for FlatCAM,\n"
"such as: layout, gui state, style, hdpi support etc."

#: flatcamGUI/FlatCAMGUI.py:3668
msgid "Clear"
msgstr "Clear"

#: flatcamGUI/FlatCAMGUI.py:3672
msgid "Hover Shape:"
msgstr "Hover Shape:"

#: flatcamGUI/FlatCAMGUI.py:3674
msgid ""
"Enable display of a hover shape for FlatCAM objects.\n"
"It is displayed whenever the mouse cursor is hovering\n"
"over any kind of not-selected object."
msgstr ""
"Enable display of a hover shape for FlatCAM objects.\n"
"It is displayed whenever the mouse cursor is hovering\n"
"over any kind of not-selected object."

#: flatcamGUI/FlatCAMGUI.py:3681
msgid "Sel. Shape:"
msgstr "Sel. Shape:"

#: flatcamGUI/FlatCAMGUI.py:3683
msgid ""
"Enable the display of a selection shape for FlatCAM objects.\n"
"It is displayed whenever the mouse selects an object\n"
"either by clicking or dragging mouse from left to right or\n"
"right to left."
msgstr ""
"Enable the display of a selection shape for FlatCAM objects.\n"
"It is displayed whenever the mouse selects an object\n"
"either by clicking or dragging mouse from left to right or\n"
"right to left."

#: flatcamGUI/FlatCAMGUI.py:3725
msgid "Are you sure you want to delete the GUI Settings? \n"
msgstr "Are you sure you want to delete the GUI Settings? \n"

#: flatcamGUI/FlatCAMGUI.py:3728
msgid "Clear GUI Settings"
msgstr "Clear GUI Settings"

#: flatcamGUI/FlatCAMGUI.py:3749
msgid "App Preferences"
msgstr "App Preferences"

#: flatcamGUI/FlatCAMGUI.py:3755
msgid "<b>Units:</b>"
msgstr "<b>Units:</b>"

#: flatcamGUI/FlatCAMGUI.py:3756
msgid ""
"The default value for FlatCAM units.\n"
"Whatever is selected here is set every time\n"
"FLatCAM is started."
msgstr ""
"The default value for FlatCAM units.\n"
"Whatever is selected here is set every time\n"
"FLatCAM is started."

#: flatcamGUI/FlatCAMGUI.py:3763
msgid "<b>APP. LEVEL:</b>"
msgstr "<b>APP. LEVEL:</b>"

#: flatcamGUI/FlatCAMGUI.py:3764
msgid ""
"Choose the default level of usage for FlatCAM.\n"
"BASIC level -> reduced functionality, best for beginner's.\n"
"ADVANCED level -> full functionality.\n"
"\n"
"The choice here will influence the parameters in\n"
"the Selected Tab for all kinds of FlatCAM objects."
msgstr ""
"Choose the default level of usage for FlatCAM.\n"
"BASIC level -> reduced functionality, best for beginner's.\n"
"ADVANCED level -> full functionality.\n"
"\n"
"The choice here will influence the parameters in\n"
"the Selected Tab for all kinds of FlatCAM objects."

#: flatcamGUI/FlatCAMGUI.py:3773
msgid "<b>Languages:</b>"
msgstr "<b>Languages:</b>"

#: flatcamGUI/FlatCAMGUI.py:3774
msgid "Set the language used throughout FlatCAM."
msgstr "Set the language used throughout FlatCAM."

#: flatcamGUI/FlatCAMGUI.py:3777
msgid "Apply Language"
msgstr "Apply Language"

#: flatcamGUI/FlatCAMGUI.py:3778
msgid ""
"Set the language used throughout FlatCAM.\n"
"The app will restart after click.Windows: When FlatCAM is installed in "
"Program Files\n"
"directory, it is possible that the app will not\n"
"restart after the button is clicked due of Windows\n"
"security features. In this case the language will be\n"
"applied at the next app start."
msgstr ""
"Set the language used throughout FlatCAM.\n"
"The app will restart after click.Windows: When FlatCAM is installed in "
"Program Files\n"
"directory, it is possible that the app will not\n"
"restart after the button is clicked due of Windows\n"
"security features. In this case the language will be\n"
"applied at the next app start."

#: flatcamGUI/FlatCAMGUI.py:3787
msgid "Shell at StartUp:"
msgstr "Shell at StartUp:"

#: flatcamGUI/FlatCAMGUI.py:3789 flatcamGUI/FlatCAMGUI.py:3794
msgid ""
"Check this box if you want the shell to\n"
"start automatically at startup."
msgstr ""
"Check this box if you want the shell to\n"
"start automatically at startup."

#: flatcamGUI/FlatCAMGUI.py:3799
msgid "Version Check:"
msgstr "Version Check:"

#: flatcamGUI/FlatCAMGUI.py:3801 flatcamGUI/FlatCAMGUI.py:3806
msgid ""
"Check this box if you want to check\n"
"for a new version automatically at startup."
msgstr ""
"Check this box if you want to check\n"
"for a new version automatically at startup."

#: flatcamGUI/FlatCAMGUI.py:3811
msgid "Send Stats:"
msgstr "Send Stats:"

#: flatcamGUI/FlatCAMGUI.py:3813 flatcamGUI/FlatCAMGUI.py:3818
msgid ""
"Check this box if you agree to send anonymous\n"
"stats automatically at startup, to help improve FlatCAM."
msgstr ""
"Check this box if you agree to send anonymous\n"
"stats automatically at startup, to help improve FlatCAM."

#: flatcamGUI/FlatCAMGUI.py:3825
msgid "<b>Pan Button:</b>"
msgstr "<b>Pan Button:</b>"

#: flatcamGUI/FlatCAMGUI.py:3826
msgid ""
"Select the mouse button to use for panning:\n"
"- MMB --> Middle Mouse Button\n"
"- RMB --> Right Mouse Button"
msgstr ""
"Select the mouse button to use for panning:\n"
"- MMB --> Middle Mouse Button\n"
"- RMB --> Right Mouse Button"

#: flatcamGUI/FlatCAMGUI.py:3833
msgid "<b>Multiple Sel:</b>"
msgstr "<b>Multiple Sel:</b>"

#: flatcamGUI/FlatCAMGUI.py:3834
msgid "Select the key used for multiple selection."
msgstr "Select the key used for multiple selection."

#: flatcamGUI/FlatCAMGUI.py:3839
msgid "Project at StartUp:"
msgstr "Project at StartUp:"

#: flatcamGUI/FlatCAMGUI.py:3841 flatcamGUI/FlatCAMGUI.py:3846
msgid ""
"Check this box if you want the project/selected/tool tab area to\n"
"to be shown automatically at startup."
msgstr ""
"Check this box if you want the project/selected/tool tab area to\n"
"to be shown automatically at startup."

#: flatcamGUI/FlatCAMGUI.py:3851
msgid "Project AutoHide:"
msgstr "Project AutoHide:"

#: flatcamGUI/FlatCAMGUI.py:3853 flatcamGUI/FlatCAMGUI.py:3859
msgid ""
"Check this box if you want the project/selected/tool tab area to\n"
"hide automatically when there are no objects loaded and\n"
"to show whenever a new object is created."
msgstr ""
"Check this box if you want the project/selected/tool tab area to\n"
"hide automatically when there are no objects loaded and\n"
"to show whenever a new object is created."

#: flatcamGUI/FlatCAMGUI.py:3865
msgid "<b>Enable ToolTips:</b>"
msgstr "<b>Enable ToolTips:</b>"

#: flatcamGUI/FlatCAMGUI.py:3867 flatcamGUI/FlatCAMGUI.py:3872
msgid ""
"Check this box if you want to have toolTips displayed\n"
"when hovering with mouse over items throughout the App."
msgstr ""
"Check this box if you want to have toolTips displayed\n"
"when hovering with mouse over items throughout the App."

#: flatcamGUI/FlatCAMGUI.py:3875
msgid "Workers number:"
msgstr "Workers number:"

#: flatcamGUI/FlatCAMGUI.py:3877 flatcamGUI/FlatCAMGUI.py:3886
msgid ""
"The number of Qthreads made available to the App.\n"
"A bigger number may finish the jobs more quickly but\n"
"depending on your computer speed, may make the App\n"
"unresponsive. Can have a value between 2 and 16.\n"
"Default value is 2.\n"
"After change, it will be applied at next App start."
msgstr ""
"The number of Qthreads made available to the App.\n"
"A bigger number may finish the jobs more quickly but\n"
"depending on your computer speed, may make the App\n"
"unresponsive. Can have a value between 2 and 16.\n"
"Default value is 2.\n"
"After change, it will be applied at next App start."

#: flatcamGUI/FlatCAMGUI.py:3898 flatcamGUI/FlatCAMGUI.py:3907
msgid ""
"This value can counter the effect of the Circle Steps\n"
"parameter. Default value is 0.01.\n"
"A lower value will increase the detail both in image\n"
"and in Gcode for the circles, with a higher cost in\n"
"performance. Higher value will provide more\n"
"performance at the expense of level of detail."
msgstr ""
"This value can counter the effect of the Circle Steps\n"
"parameter. Default value is 0.01.\n"
"A lower value will increase the detail both in image\n"
"and in Gcode for the circles, with a higher cost in\n"
"performance. Higher value will provide more\n"
"performance at the expense of level of detail."

#: flatcamGUI/FlatCAMGUI.py:3943
msgid "\"Open\" behavior"
msgstr "\"Open\" behavior"

#: flatcamGUI/FlatCAMGUI.py:3945
msgid ""
"When checked the path for the last saved file is used when saving files,\n"
"and the path for the last opened file is used when opening files.\n"
"\n"
"When unchecked the path for opening files is the one used last: either the\n"
"path for saving files or the path for opening files."
msgstr ""
"When checked the path for the last saved file is used when saving files,\n"
"and the path for the last opened file is used when opening files.\n"
"\n"
"When unchecked the path for opening files is the one used last: either the\n"
"path for saving files or the path for opening files."

#: flatcamGUI/FlatCAMGUI.py:3954
msgid "Save Compressed Project"
msgstr "Save Compressed Project"

#: flatcamGUI/FlatCAMGUI.py:3956
msgid ""
"Whether to save a compressed or uncompressed project.\n"
"When checked it will save a compressed FlatCAM project."
msgstr ""
"Whether to save a compressed or uncompressed project.\n"
"When checked it will save a compressed FlatCAM project."

#: flatcamGUI/FlatCAMGUI.py:3967
msgid "Compression Level:"
msgstr "Compression Level:"

#: flatcamGUI/FlatCAMGUI.py:3969
msgid ""
"The level of compression used when saving\n"
"a FlatCAM project. Higher value means better compression\n"
"but require more RAM usage and more processing time."
msgstr ""
"The level of compression used when saving\n"
"a FlatCAM project. Higher value means better compression\n"
"but require more RAM usage and more processing time."

#: flatcamGUI/FlatCAMGUI.py:3995 flatcamGUI/FlatCAMGUI.py:4361
#: flatcamGUI/FlatCAMGUI.py:5153 flatcamGUI/FlatCAMGUI.py:5525
#: flatcamGUI/ObjectUI.py:150 flatcamGUI/ObjectUI.py:505
#: flatcamGUI/ObjectUI.py:833 flatcamGUI/ObjectUI.py:1350
msgid "<b>Plot Options:</b>"
msgstr "<b>Plot Options:</b>"

#: flatcamGUI/FlatCAMGUI.py:4002 flatcamGUI/FlatCAMGUI.py:4373
#: flatcamGUI/ObjectUI.py:156 flatcamGUI/ObjectUI.py:506
msgid "Solid"
msgstr "Solid"

#: flatcamGUI/FlatCAMGUI.py:4004 flatcamGUI/ObjectUI.py:158
msgid "Solid color polygons."
msgstr "Solid color polygons."

#: flatcamGUI/FlatCAMGUI.py:4009 flatcamGUI/ObjectUI.py:164
msgid "M-Color"
msgstr "M-Color"

#: flatcamGUI/FlatCAMGUI.py:4011 flatcamGUI/ObjectUI.py:166
msgid "Draw polygons in different colors."
msgstr "Draw polygons in different colors."

#: flatcamGUI/FlatCAMGUI.py:4016 flatcamGUI/FlatCAMGUI.py:4367
#: flatcamGUI/FlatCAMGUI.py:5157 flatcamGUI/ObjectUI.py:172
msgid "Plot"
msgstr "Plot"

#: flatcamGUI/FlatCAMGUI.py:4018 flatcamGUI/FlatCAMGUI.py:5159
#: flatcamGUI/ObjectUI.py:174 flatcamGUI/ObjectUI.py:546
#: flatcamGUI/ObjectUI.py:879 flatcamGUI/ObjectUI.py:1450
msgid "Plot (show) this object."
msgstr "Plot (show) this object."

#: flatcamGUI/FlatCAMGUI.py:4023 flatcamGUI/FlatCAMGUI.py:5166
#: flatcamGUI/FlatCAMGUI.py:5608
msgid "Circle Steps:"
msgstr "Circle Steps:"

#: flatcamGUI/FlatCAMGUI.py:4025
msgid ""
"The number of circle steps for Gerber \n"
"circular aperture linear approximation."
msgstr ""
"The number of circle steps for Gerber \n"
"circular aperture linear approximation."

#: flatcamGUI/FlatCAMGUI.py:4040
msgid "Gerber Options"
msgstr "Gerber Options"

#: flatcamGUI/FlatCAMGUI.py:4043 flatcamGUI/ObjectUI.py:251
msgid "<b>Isolation Routing:</b>"
msgstr "<b>Isolation Routing:</b>"

#: flatcamGUI/FlatCAMGUI.py:4045 flatcamGUI/ObjectUI.py:253
msgid ""
"Create a Geometry object with\n"
"toolpaths to cut outside polygons."
msgstr ""
"Create a Geometry object with\n"
"toolpaths to cut outside polygons."

#: flatcamGUI/FlatCAMGUI.py:4056 flatcamGUI/FlatCAMGUI.py:4753
#: flatcamGUI/FlatCAMGUI.py:5897 flatcamGUI/ObjectUI.py:788
#: flatcamGUI/ObjectUI.py:804
msgid "Diameter of the cutting tool."
msgstr "Diameter of the cutting tool."

#: flatcamGUI/FlatCAMGUI.py:4063
msgid "Width (# passes):"
msgstr "Width (# passes):"

#: flatcamGUI/FlatCAMGUI.py:4065 flatcamGUI/ObjectUI.py:275
msgid ""
"Width of the isolation gap in\n"
"number (integer) of tool widths."
msgstr ""
"Width of the isolation gap in\n"
"number (integer) of tool widths."

#: flatcamGUI/FlatCAMGUI.py:4073 flatcamGUI/ObjectUI.py:283
msgid "Pass overlap:"
msgstr "Pass overlap:"

#: flatcamGUI/FlatCAMGUI.py:4075 flatcamGUI/ObjectUI.py:285
#, python-format
msgid ""
"How much (fraction) of the tool width to overlap each tool pass.\n"
"Example:\n"
"A value here of 0.25 means an overlap of 25%% from the tool diameter found "
"above."
msgstr ""
"How much (fraction) of the tool width to overlap each tool pass.\n"
"Example:\n"
"A value here of 0.25 means an overlap of 25%% from the tool diameter found "
"above."

#: flatcamGUI/FlatCAMGUI.py:4083 flatcamGUI/ObjectUI.py:295
msgid "Milling Type:"
msgstr "Milling Type:"

#: flatcamGUI/FlatCAMGUI.py:4085 flatcamGUI/ObjectUI.py:297
msgid ""
"Milling type:\n"
"- climb / best for precision milling and to reduce tool usage\n"
"- conventional / useful when there is no backlash compensation"
msgstr ""
"Milling type:\n"
"- climb / best for precision milling and to reduce tool usage\n"
"- conventional / useful when there is no backlash compensation"

#: flatcamGUI/FlatCAMGUI.py:4095
msgid "Combine Passes"
msgstr "Combine Passes"

#: flatcamGUI/FlatCAMGUI.py:4097 flatcamGUI/ObjectUI.py:309
msgid "Combine all passes into one object"
msgstr "Combine all passes into one object"

#: flatcamGUI/FlatCAMGUI.py:4102
msgid "<b>Clear non-copper:</b>"
msgstr "<b>Clear non-copper:</b>"

#: flatcamGUI/FlatCAMGUI.py:4104 flatcamGUI/FlatCAMGUI.py:5785
#: flatcamGUI/ObjectUI.py:386
msgid ""
"Create a Geometry object with\n"
"toolpaths to cut all non-copper regions."
msgstr ""
"Create a Geometry object with\n"
"toolpaths to cut all non-copper regions."

#: flatcamGUI/FlatCAMGUI.py:4113 flatcamGUI/FlatCAMGUI.py:4139
#: flatcamGUI/ObjectUI.py:430 flatcamGUI/ObjectUI.py:464
msgid "Boundary Margin:"
msgstr "Boundary Margin:"

#: flatcamGUI/FlatCAMGUI.py:4115 flatcamGUI/ObjectUI.py:432
msgid ""
"Specify the edge of the PCB\n"
"by drawing a box around all\n"
"objects with this minimum\n"
"distance."
msgstr ""
"Specify the edge of the PCB\n"
"by drawing a box around all\n"
"objects with this minimum\n"
"distance."

#: flatcamGUI/FlatCAMGUI.py:4125 flatcamGUI/FlatCAMGUI.py:4148
msgid "Rounded corners"
msgstr "Rounded corners"

#: flatcamGUI/FlatCAMGUI.py:4127
msgid ""
"Creates a Geometry objects with polygons\n"
"covering the copper-free areas of the PCB."
msgstr ""
"Creates a Geometry objects with polygons\n"
"covering the copper-free areas of the PCB."

#: flatcamGUI/FlatCAMGUI.py:4133 flatcamGUI/ObjectUI.py:454
msgid "<b>Bounding Box:</b>"
msgstr "<b>Bounding Box:</b>"

#: flatcamGUI/FlatCAMGUI.py:4141 flatcamGUI/ObjectUI.py:466
msgid ""
"Distance of the edges of the box\n"
"to the nearest polygon."
msgstr ""
"Distance of the edges of the box\n"
"to the nearest polygon."

#: flatcamGUI/FlatCAMGUI.py:4150 flatcamGUI/ObjectUI.py:476
msgid ""
"If the bounding box is \n"
"to have rounded corners\n"
"their radius is equal to\n"
"the margin."
msgstr ""
"If the bounding box is \n"
"to have rounded corners\n"
"their radius is equal to\n"
"the margin."

#: flatcamGUI/FlatCAMGUI.py:4164
msgid "Gerber Adv. Options"
msgstr "Gerber Adv. Options"

#: flatcamGUI/FlatCAMGUI.py:4167
msgid "<b>Advanced Param.:</b>"
msgstr "<b>Advanced Param.:</b>"

#: flatcamGUI/FlatCAMGUI.py:4169
msgid ""
"A list of Gerber advanced parameters.\n"
"Those parameters are available only for\n"
"Advanced App. Level."
msgstr ""
"A list of Gerber advanced parameters.\n"
"Those parameters are available only for\n"
"Advanced App. Level."

#: flatcamGUI/FlatCAMGUI.py:4179 flatcamGUI/ObjectUI.py:314
msgid "\"Follow\""
msgstr "\"Follow\""

#: flatcamGUI/FlatCAMGUI.py:4181 flatcamGUI/ObjectUI.py:316
msgid ""
"Generate a 'Follow' geometry.\n"
"This means that it will cut through\n"
"the middle of the trace."
msgstr ""
"Generate a 'Follow' geometry.\n"
"This means that it will cut through\n"
"the middle of the trace."

#: flatcamGUI/FlatCAMGUI.py:4188
msgid "Table Show/Hide"
msgstr "Table Show/Hide"

#: flatcamGUI/FlatCAMGUI.py:4190
msgid ""
"Toggle the display of the Gerber Apertures Table.\n"
"Also, on hide, it will delete all mark shapes\n"
"that are drawn on canvas."
msgstr ""
"Toggle the display of the Gerber Apertures Table.\n"
"Also, on hide, it will delete all mark shapes\n"
"that are drawn on canvas."

#: flatcamGUI/FlatCAMGUI.py:4229
msgid "Gerber Export"
msgstr "Gerber Export"

#: flatcamGUI/FlatCAMGUI.py:4232 flatcamGUI/FlatCAMGUI.py:4902
msgid "<b>Export Options:</b>"
msgstr "<b>Export Options:</b>"

#: flatcamGUI/FlatCAMGUI.py:4234
msgid ""
"The parameters set here are used in the file exported\n"
"when using the File -> Export -> Export Gerber menu entry."
msgstr ""
"The parameters set here are used in the file exported\n"
"when using the File -> Export -> Export Gerber menu entry."

#: flatcamGUI/FlatCAMGUI.py:4243 flatcamGUI/FlatCAMGUI.py:4913
msgid "<b>Units</b>:"
msgstr "<b>Units</b>:"

#: flatcamGUI/FlatCAMGUI.py:4245 flatcamGUI/FlatCAMGUI.py:4251
msgid "The units used in the Gerber file."
msgstr "The units used in the Gerber file."

#: flatcamGUI/FlatCAMGUI.py:4257 flatcamGUI/FlatCAMGUI.py:4927
msgid "<b>Int/Decimals:</b>"
msgstr "<b>Int/Decimals:</b>"

#: flatcamGUI/FlatCAMGUI.py:4259
msgid ""
"The number of digits in the whole part of the number\n"
"and in the fractional part of the number."
msgstr ""
"The number of digits in the whole part of the number\n"
"and in the fractional part of the number."

#: flatcamGUI/FlatCAMGUI.py:4270
msgid ""
"This numbers signify the number of digits in\n"
"the whole part of Gerber coordinates."
msgstr ""
"This numbers signify the number of digits in\n"
"the whole part of Gerber coordinates."

#: flatcamGUI/FlatCAMGUI.py:4284
msgid ""
"This numbers signify the number of digits in\n"
"the decimal part of Gerber coordinates."
msgstr ""
"This numbers signify the number of digits in\n"
"the decimal part of Gerber coordinates."

#: flatcamGUI/FlatCAMGUI.py:4293 flatcamGUI/FlatCAMGUI.py:4988
msgid "<b>Zeros</b>:"
msgstr "<b>Zeros</b>:"

#: flatcamGUI/FlatCAMGUI.py:4296 flatcamGUI/FlatCAMGUI.py:4306
msgid ""
"This sets the type of Gerber zeros.\n"
"If LZ then Leading Zeros are removed and\n"
"Trailing Zeros are kept.\n"
"If TZ is checked then Trailing Zeros are removed\n"
"and Leading Zeros are kept."
msgstr ""
"This sets the type of Gerber zeros.\n"
"If LZ then Leading Zeros are removed and\n"
"Trailing Zeros are kept.\n"
"If TZ is checked then Trailing Zeros are removed\n"
"and Leading Zeros are kept."

#: flatcamGUI/FlatCAMGUI.py:4326 flatcamGUI/FlatCAMGUI.py:5029
#: flatcamGUI/FlatCAMGUI.py:5491 flatcamGUI/FlatCAMGUI.py:5783
#: flatcamGUI/FlatCAMGUI.py:5884 flatcamGUI/FlatCAMGUI.py:5963
#: flatcamGUI/FlatCAMGUI.py:6022 flatcamGUI/FlatCAMGUI.py:6125
#: flatcamGUI/FlatCAMGUI.py:6186 flatcamGUI/FlatCAMGUI.py:6385
#: flatcamGUI/FlatCAMGUI.py:6512
msgid "<b>Parameters:</b>"
msgstr "<b>Parameters:</b>"

#: flatcamGUI/FlatCAMGUI.py:4328
msgid "A list of Gerber Editor parameters."
msgstr "A list of Gerber Editor parameters."

#: flatcamGUI/FlatCAMGUI.py:4336 flatcamGUI/FlatCAMGUI.py:5039
#: flatcamGUI/FlatCAMGUI.py:5501
msgid "Selection limit:"
msgstr "Selection limit:"

#: flatcamGUI/FlatCAMGUI.py:4338
msgid ""
"Set the number of selected Gerber geometry\n"
"items above which the utility geometry\n"
"becomes just a selection rectangle.\n"
"Increases the performance when moving a\n"
"large number of geometric elements."
msgstr ""
"Set the number of selected Gerber geometry\n"
"items above which the utility geometry\n"
"becomes just a selection rectangle.\n"
"Increases the performance when moving a\n"
"large number of geometric elements."

#: flatcamGUI/FlatCAMGUI.py:4358
msgid "Excellon General"
msgstr "Excellon General"

#: flatcamGUI/FlatCAMGUI.py:4380
msgid "<b>Excellon Format:</b>"
msgstr "<b>Excellon Format:</b>"

#: flatcamGUI/FlatCAMGUI.py:4382
msgid ""
"The NC drill files, usually named Excellon files\n"
"are files that can be found in different formats.\n"
"Here we set the format used when the provided\n"
"coordinates are not using period.\n"
"\n"
"Possible presets:\n"
"\n"
"PROTEUS 3:3 MM LZ\n"
"DipTrace 5:2 MM TZ\n"
"DipTrace 4:3 MM LZ\n"
"\n"
"EAGLE 3:3 MM TZ\n"
"EAGLE 4:3 MM TZ\n"
"EAGLE 2:5 INCH TZ\n"
"EAGLE 3:5 INCH TZ\n"
"\n"
"ALTIUM 2:4 INCH LZ\n"
"Sprint Layout 2:4 INCH LZ\n"
"KiCAD 3:5 INCH TZ"
msgstr ""
"The NC drill files, usually named Excellon files\n"
"are files that can be found in different formats.\n"
"Here we set the format used when the provided\n"
"coordinates are not using period.\n"
"\n"
"Possible presets:\n"
"\n"
"PROTEUS 3:3 MM LZ\n"
"DipTrace 5:2 MM TZ\n"
"DipTrace 4:3 MM LZ\n"
"\n"
"EAGLE 3:3 MM TZ\n"
"EAGLE 4:3 MM TZ\n"
"EAGLE 2:5 INCH TZ\n"
"EAGLE 3:5 INCH TZ\n"
"\n"
"ALTIUM 2:4 INCH LZ\n"
"Sprint Layout 2:4 INCH LZ\n"
"KiCAD 3:5 INCH TZ"

#: flatcamGUI/FlatCAMGUI.py:4407
msgid "INCH:"
msgstr "INCH:"

#: flatcamGUI/FlatCAMGUI.py:4410
msgid "Default values for INCH are 2:4"
msgstr "Default values for INCH are 2:4"

#: flatcamGUI/FlatCAMGUI.py:4418 flatcamGUI/FlatCAMGUI.py:4451
#: flatcamGUI/FlatCAMGUI.py:4942
msgid ""
"This numbers signify the number of digits in\n"
"the whole part of Excellon coordinates."
msgstr ""
"This numbers signify the number of digits in\n"
"the whole part of Excellon coordinates."

#: flatcamGUI/FlatCAMGUI.py:4432 flatcamGUI/FlatCAMGUI.py:4465
#: flatcamGUI/FlatCAMGUI.py:4956
msgid ""
"This numbers signify the number of digits in\n"
"the decimal part of Excellon coordinates."
msgstr ""
"This numbers signify the number of digits in\n"
"the decimal part of Excellon coordinates."

#: flatcamGUI/FlatCAMGUI.py:4440
msgid "METRIC:"
msgstr "METRIC:"

#: flatcamGUI/FlatCAMGUI.py:4443
msgid "Default values for METRIC are 3:3"
msgstr "Default values for METRIC are 3:3"

#: flatcamGUI/FlatCAMGUI.py:4474
msgid "Default <b>Zeros</b>:"
msgstr "Default <b>Zeros</b>:"

#: flatcamGUI/FlatCAMGUI.py:4477 flatcamGUI/FlatCAMGUI.py:4991
msgid ""
"This sets the type of Excellon zeros.\n"
"If LZ then Leading Zeros are kept and\n"
"Trailing Zeros are removed.\n"
"If TZ is checked then Trailing Zeros are kept\n"
"and Leading Zeros are removed."
msgstr ""
"This sets the type of Excellon zeros.\n"
"If LZ then Leading Zeros are kept and\n"
"Trailing Zeros are removed.\n"
"If TZ is checked then Trailing Zeros are kept\n"
"and Leading Zeros are removed."

#: flatcamGUI/FlatCAMGUI.py:4488
msgid ""
"This sets the default type of Excellon zeros.\n"
"If it is not detected in the parsed file the value here\n"
"will be used.If LZ then Leading Zeros are kept and\n"
"Trailing Zeros are removed.\n"
"If TZ is checked then Trailing Zeros are kept\n"
"and Leading Zeros are removed."
msgstr ""
"This sets the default type of Excellon zeros.\n"
"If it is not detected in the parsed file the value here\n"
"will be used.If LZ then Leading Zeros are kept and\n"
"Trailing Zeros are removed.\n"
"If TZ is checked then Trailing Zeros are kept\n"
"and Leading Zeros are removed."

#: flatcamGUI/FlatCAMGUI.py:4502
msgid "Default <b>Units</b>:"
msgstr "Default <b>Units</b>:"

#: flatcamGUI/FlatCAMGUI.py:4505
msgid ""
"This sets the default units of Excellon files.\n"
"If it is not detected in the parsed file the value here\n"
"will be used.Some Excellon files don't have an header\n"
"therefore this parameter will be used."
msgstr ""
"This sets the default units of Excellon files.\n"
"If it is not detected in the parsed file the value here\n"
"will be used.Some Excellon files don't have an header\n"
"therefore this parameter will be used."

#: flatcamGUI/FlatCAMGUI.py:4516
msgid ""
"This sets the units of Excellon files.\n"
"Some Excellon files don't have an header\n"
"therefore this parameter will be used."
msgstr ""
"This sets the units of Excellon files.\n"
"Some Excellon files don't have an header\n"
"therefore this parameter will be used."

#: flatcamGUI/FlatCAMGUI.py:4532
msgid "<b>Excellon Optimization:</b>"
msgstr "<b>Excellon Optimization:</b>"

#: flatcamGUI/FlatCAMGUI.py:4539
msgid "Algorithm:   "
msgstr "Algorithm:   "

#: flatcamGUI/FlatCAMGUI.py:4542 flatcamGUI/FlatCAMGUI.py:4555
msgid ""
"This sets the optimization type for the Excellon drill path.\n"
"If MH is checked then Google OR-Tools algorithm with MetaHeuristic\n"
"Guided Local Path is used. Default search time is 3sec.\n"
"Use set_sys excellon_search_time value Tcl Command to set other values.\n"
"If Basic is checked then Google OR-Tools Basic algorithm is used.\n"
"\n"
"If DISABLED, then FlatCAM works in 32bit mode and it uses \n"
"Travelling Salesman algorithm for path optimization."
msgstr ""
"This sets the optimization type for the Excellon drill path.\n"
"If MH is checked then Google OR-Tools algorithm with MetaHeuristic\n"
"Guided Local Path is used. Default search time is 3sec.\n"
"Use set_sys excellon_search_time value Tcl Command to set other values.\n"
"If Basic is checked then Google OR-Tools Basic algorithm is used.\n"
"\n"
"If DISABLED, then FlatCAM works in 32bit mode and it uses \n"
"Travelling Salesman algorithm for path optimization."

#: flatcamGUI/FlatCAMGUI.py:4567
msgid "Optimization Time:   "
msgstr "Optimization Time:   "

#: flatcamGUI/FlatCAMGUI.py:4570
msgid ""
"When OR-Tools Metaheuristic (MH) is enabled there is a\n"
"maximum threshold for how much time is spent doing the\n"
"path optimization. This max duration is set here.\n"
"In seconds."
msgstr ""
"When OR-Tools Metaheuristic (MH) is enabled there is a\n"
"maximum threshold for how much time is spent doing the\n"
"path optimization. This max duration is set here.\n"
"In seconds."

#: flatcamGUI/FlatCAMGUI.py:4612
msgid "Excellon Options"
msgstr "Excellon Options"

#: flatcamGUI/FlatCAMGUI.py:4615 flatcamGUI/ObjectUI.py:584
msgid "<b>Create CNC Job</b>"
msgstr "<b>Create CNC Job</b>"

#: flatcamGUI/FlatCAMGUI.py:4617
msgid ""
"Parameters used to create a CNC Job object\n"
"for this drill object."
msgstr ""
"Parameters used to create a CNC Job object\n"
"for this drill object."

#: flatcamGUI/FlatCAMGUI.py:4625 flatcamGUI/FlatCAMGUI.py:5217
#: flatcamGUI/FlatCAMGUI.py:6321 flatcamGUI/ObjectUI.py:595
#: flatcamGUI/ObjectUI.py:1062 flatcamTools/ToolCalculators.py:108
msgid "Cut Z:"
msgstr "Cut Z:"

#: flatcamGUI/FlatCAMGUI.py:4627 flatcamGUI/ObjectUI.py:597
msgid ""
"Drill depth (negative)\n"
"below the copper surface."
msgstr ""
"Drill depth (negative)\n"
"below the copper surface."

#: flatcamGUI/FlatCAMGUI.py:4634 flatcamGUI/FlatCAMGUI.py:5250
#: flatcamGUI/ObjectUI.py:605 flatcamGUI/ObjectUI.py:1098
msgid "Travel Z:"
msgstr "Travel Z:"

#: flatcamGUI/FlatCAMGUI.py:4636 flatcamGUI/ObjectUI.py:607
msgid ""
"Tool height when travelling\n"
"across the XY plane."
msgstr ""
"Tool height when travelling\n"
"across the XY plane."

#: flatcamGUI/FlatCAMGUI.py:4644 flatcamGUI/FlatCAMGUI.py:5260
msgid "Tool change:"
msgstr "Tool change:"

#: flatcamGUI/FlatCAMGUI.py:4646 flatcamGUI/FlatCAMGUI.py:5262
#: flatcamGUI/ObjectUI.py:617
msgid ""
"Include tool-change sequence\n"
"in G-Code (Pause for tool change)."
msgstr ""
"Include tool-change sequence\n"
"in G-Code (Pause for tool change)."

#: flatcamGUI/FlatCAMGUI.py:4653 flatcamGUI/FlatCAMGUI.py:5270
msgid "Toolchange Z:"
msgstr "Toolchange Z:"

#: flatcamGUI/FlatCAMGUI.py:4655 flatcamGUI/FlatCAMGUI.py:5272
msgid "Toolchange Z position."
msgstr "Toolchange Z position."

#: flatcamGUI/FlatCAMGUI.py:4661
msgid "Feedrate:"
msgstr "Feedrate:"

#: flatcamGUI/FlatCAMGUI.py:4663
msgid ""
"Tool speed while drilling\n"
"(in units per minute)."
msgstr ""
"Tool speed while drilling\n"
"(in units per minute)."

#: flatcamGUI/FlatCAMGUI.py:4671
msgid "Spindle Speed:"
msgstr "Spindle Speed:"

#: flatcamGUI/FlatCAMGUI.py:4673 flatcamGUI/FlatCAMGUI.py:5302
#: flatcamGUI/ObjectUI.py:684
msgid ""
"Speed of the spindle\n"
"in RPM (optional)"
msgstr ""
"Speed of the spindle\n"
"in RPM (optional)"

#: flatcamGUI/FlatCAMGUI.py:4681 flatcamGUI/FlatCAMGUI.py:5310
msgid "Spindle dir.:"
msgstr "Spindle dir.:"

#: flatcamGUI/FlatCAMGUI.py:4683 flatcamGUI/FlatCAMGUI.py:5312
msgid ""
"This sets the direction that the spindle is rotating.\n"
"It can be either:\n"
"- CW = clockwise or\n"
"- CCW = counter clockwise"
msgstr ""
"This sets the direction that the spindle is rotating.\n"
"It can be either:\n"
"- CW = clockwise or\n"
"- CCW = counter clockwise"

#: flatcamGUI/FlatCAMGUI.py:4695 flatcamGUI/FlatCAMGUI.py:5324
#: flatcamGUI/ObjectUI.py:692 flatcamGUI/ObjectUI.py:1224
msgid "Dwell:"
msgstr "Dwell:"

#: flatcamGUI/FlatCAMGUI.py:4697 flatcamGUI/FlatCAMGUI.py:5326
#: flatcamGUI/ObjectUI.py:694 flatcamGUI/ObjectUI.py:1227
msgid ""
"Pause to allow the spindle to reach its\n"
"speed before cutting."
msgstr ""
"Pause to allow the spindle to reach its\n"
"speed before cutting."

#: flatcamGUI/FlatCAMGUI.py:4700 flatcamGUI/FlatCAMGUI.py:5329
msgid "Duration:"
msgstr "Duration:"

#: flatcamGUI/FlatCAMGUI.py:4702 flatcamGUI/FlatCAMGUI.py:5331
#: flatcamGUI/ObjectUI.py:699 flatcamGUI/ObjectUI.py:1234
msgid "Number of milliseconds for spindle to dwell."
msgstr "Number of milliseconds for spindle to dwell."

#: flatcamGUI/FlatCAMGUI.py:4714 flatcamGUI/FlatCAMGUI.py:5341
#: flatcamGUI/ObjectUI.py:707
msgid "Postprocessor:"
msgstr "Postprocessor:"

#: flatcamGUI/FlatCAMGUI.py:4716
msgid ""
"The postprocessor file that dictates\n"
"gcode output."
msgstr ""
"The postprocessor file that dictates\n"
"gcode output."

#: flatcamGUI/FlatCAMGUI.py:4725
msgid "<b>Gcode:    </b>"
msgstr "<b>Gcode:    </b>"

#: flatcamGUI/FlatCAMGUI.py:4727
msgid ""
"Choose what to use for GCode generation:\n"
"'Drills', 'Slots' or 'Both'.\n"
"When choosing 'Slots' or 'Both', slots will be\n"
"converted to drills."
msgstr ""
"Choose what to use for GCode generation:\n"
"'Drills', 'Slots' or 'Both'.\n"
"When choosing 'Slots' or 'Both', slots will be\n"
"converted to drills."

#: flatcamGUI/FlatCAMGUI.py:4743 flatcamGUI/ObjectUI.py:772
msgid "<b>Mill Holes</b>"
msgstr "<b>Mill Holes</b>"

#: flatcamGUI/FlatCAMGUI.py:4745 flatcamGUI/ObjectUI.py:774
msgid "Create Geometry for milling holes."
msgstr "Create Geometry for milling holes."

#: flatcamGUI/FlatCAMGUI.py:4751
msgid "Drill Tool dia:"
msgstr "Drill Tool dia:"

#: flatcamGUI/FlatCAMGUI.py:4758
msgid "Slot Tool dia:"
msgstr "Slot Tool dia:"

#: flatcamGUI/FlatCAMGUI.py:4760
msgid ""
"Diameter of the cutting tool\n"
"when milling slots."
msgstr ""
"Diameter of the cutting tool\n"
"when milling slots."

#: flatcamGUI/FlatCAMGUI.py:4772
msgid "Defaults"
msgstr "Defaults"

#: flatcamGUI/FlatCAMGUI.py:4785
msgid "Excellon Adv. Options"
msgstr "Excellon Adv. Options"

#: flatcamGUI/FlatCAMGUI.py:4791 flatcamGUI/FlatCAMGUI.py:5364
msgid "<b>Advanced Options:</b>"
msgstr "<b>Advanced Options:</b>"

#: flatcamGUI/FlatCAMGUI.py:4793
msgid ""
"Parameters used to create a CNC Job object\n"
"for this drill object that are shown when App Level is Advanced."
msgstr ""
"Parameters used to create a CNC Job object\n"
"for this drill object that are shown when App Level is Advanced."

#: flatcamGUI/FlatCAMGUI.py:4801
msgid "Offset Z:"
msgstr "Offset Z:"

#: flatcamGUI/FlatCAMGUI.py:4803 flatcamGUI/ObjectUI.py:574
msgid ""
"Some drill bits (the larger ones) need to drill deeper\n"
"to create the desired exit hole diameter due of the tip shape.\n"
"The value here can compensate the Cut Z parameter."
msgstr ""
"Some drill bits (the larger ones) need to drill deeper\n"
"to create the desired exit hole diameter due of the tip shape.\n"
"The value here can compensate the Cut Z parameter."

#: flatcamGUI/FlatCAMGUI.py:4810 flatcamGUI/FlatCAMGUI.py:5375
msgid "Toolchange X,Y:"
msgstr "Toolchange X,Y:"

#: flatcamGUI/FlatCAMGUI.py:4812 flatcamGUI/FlatCAMGUI.py:5377
msgid "Toolchange X,Y position."
msgstr "Toolchange X,Y position."

#: flatcamGUI/FlatCAMGUI.py:4818 flatcamGUI/FlatCAMGUI.py:5384
#: flatcamGUI/ObjectUI.py:634
msgid "Start move Z:"
msgstr "Start move Z:"

#: flatcamGUI/FlatCAMGUI.py:4820
msgid ""
"Height of the tool just after start.\n"
"Delete the value if you don't need this feature."
msgstr ""
"Height of the tool just after start.\n"
"Delete the value if you don't need this feature."

#: flatcamGUI/FlatCAMGUI.py:4827 flatcamGUI/FlatCAMGUI.py:5394
#: flatcamGUI/ObjectUI.py:644 flatcamGUI/ObjectUI.py:1144
msgid "End move Z:"
msgstr "End move Z:"

#: flatcamGUI/FlatCAMGUI.py:4829 flatcamGUI/FlatCAMGUI.py:5396
msgid ""
"Height of the tool after\n"
"the last move at the end of the job."
msgstr ""
"Height of the tool after\n"
"the last move at the end of the job."

#: flatcamGUI/FlatCAMGUI.py:4836 flatcamGUI/FlatCAMGUI.py:5404
#: flatcamGUI/ObjectUI.py:665
msgid "Feedrate Rapids:"
msgstr "Feedrate Rapids:"

#: flatcamGUI/FlatCAMGUI.py:4838 flatcamGUI/ObjectUI.py:667
msgid ""
"Tool speed while drilling\n"
"(in units per minute).\n"
"This is for the rapid move G00.\n"
"It is useful only for Marlin,\n"
"ignore for any other cases."
msgstr ""
"Tool speed while drilling\n"
"(in units per minute).\n"
"This is for the rapid move G00.\n"
"It is useful only for Marlin,\n"
"ignore for any other cases."

#: flatcamGUI/FlatCAMGUI.py:4849 flatcamGUI/FlatCAMGUI.py:5428
#: flatcamGUI/ObjectUI.py:718 flatcamGUI/ObjectUI.py:1256
msgid "Probe Z depth:"
msgstr "Probe Z depth:"

#: flatcamGUI/FlatCAMGUI.py:4851 flatcamGUI/FlatCAMGUI.py:5430
#: flatcamGUI/ObjectUI.py:720 flatcamGUI/ObjectUI.py:1259
msgid ""
"The maximum depth that the probe is allowed\n"
"to probe. Negative value, in current units."
msgstr ""
"The maximum depth that the probe is allowed\n"
"to probe. Negative value, in current units."

#: flatcamGUI/FlatCAMGUI.py:4859 flatcamGUI/FlatCAMGUI.py:5438
#: flatcamGUI/ObjectUI.py:730 flatcamGUI/ObjectUI.py:1270
msgid "Feedrate Probe:"
msgstr "Feedrate Probe:"

#: flatcamGUI/FlatCAMGUI.py:4861 flatcamGUI/FlatCAMGUI.py:5440
#: flatcamGUI/ObjectUI.py:732 flatcamGUI/ObjectUI.py:1273
msgid "The feedrate used while the probe is probing."
msgstr "The feedrate used while the probe is probing."

#: flatcamGUI/FlatCAMGUI.py:4867 flatcamGUI/FlatCAMGUI.py:5447
msgid "Fast Plunge:"
msgstr "Fast Plunge:"

#: flatcamGUI/FlatCAMGUI.py:4869 flatcamGUI/FlatCAMGUI.py:5449
msgid ""
"By checking this, the vertical move from\n"
"Z_Toolchange to Z_move is done with G0,\n"
"meaning the fastest speed available.\n"
"WARNING: the move is done at Toolchange X,Y coords."
msgstr ""
"By checking this, the vertical move from\n"
"Z_Toolchange to Z_move is done with G0,\n"
"meaning the fastest speed available.\n"
"WARNING: the move is done at Toolchange X,Y coords."

#: flatcamGUI/FlatCAMGUI.py:4878
msgid "Fast Retract:"
msgstr "Fast Retract:"

#: flatcamGUI/FlatCAMGUI.py:4880
msgid ""
"Exit hole strategy.\n"
" - When uncheked, while exiting the drilled hole the drill bit\n"
"will travel slow, with set feedrate (G1), up to zero depth and then\n"
"travel as fast as possible (G0) to the Z Move (travel height).\n"
" - When checked the travel from Z cut (cut depth) to Z_move\n"
"(travel height) is done as fast as possible (G0) in one move."
msgstr ""
"Exit hole strategy.\n"
" - When uncheked, while exiting the drilled hole the drill bit\n"
"will travel slow, with set feedrate (G1), up to zero depth and then\n"
"travel as fast as possible (G0) to the Z Move (travel height).\n"
" - When checked the travel from Z cut (cut depth) to Z_move\n"
"(travel height) is done as fast as possible (G0) in one move."

#: flatcamGUI/FlatCAMGUI.py:4899
msgid "Excellon Export"
msgstr "Excellon Export"

#: flatcamGUI/FlatCAMGUI.py:4904
msgid ""
"The parameters set here are used in the file exported\n"
"when using the File -> Export -> Export Excellon menu entry."
msgstr ""
"The parameters set here are used in the file exported\n"
"when using the File -> Export -> Export Excellon menu entry."

#: flatcamGUI/FlatCAMGUI.py:4915 flatcamGUI/FlatCAMGUI.py:4921
msgid "The units used in the Excellon file."
msgstr "The units used in the Excellon file."

#: flatcamGUI/FlatCAMGUI.py:4929
msgid ""
"The NC drill files, usually named Excellon files\n"
"are files that can be found in different formats.\n"
"Here we set the format used when the provided\n"
"coordinates are not using period."
msgstr ""
"The NC drill files, usually named Excellon files\n"
"are files that can be found in different formats.\n"
"Here we set the format used when the provided\n"
"coordinates are not using period."

#: flatcamGUI/FlatCAMGUI.py:4965
msgid "<b>Format:</b>"
msgstr "<b>Format:</b>"

#: flatcamGUI/FlatCAMGUI.py:4967 flatcamGUI/FlatCAMGUI.py:4977
msgid ""
"Select the kind of coordinates format used.\n"
"Coordinates can be saved with decimal point or without.\n"
"When there is no decimal point, it is required to specify\n"
"the number of digits for integer part and the number of decimals.\n"
"Also it will have to be specified if LZ = leading zeros are kept\n"
"or TZ = trailing zeros are kept."
msgstr ""
"Select the kind of coordinates format used.\n"
"Coordinates can be saved with decimal point or without.\n"
"When there is no decimal point, it is required to specify\n"
"the number of digits for integer part and the number of decimals.\n"
"Also it will have to be specified if LZ = leading zeros are kept\n"
"or TZ = trailing zeros are kept."

#: flatcamGUI/FlatCAMGUI.py:5001
msgid ""
"This sets the default type of Excellon zeros.\n"
"If LZ then Leading Zeros are kept and\n"
"Trailing Zeros are removed.\n"
"If TZ is checked then Trailing Zeros are kept\n"
"and Leading Zeros are removed."
msgstr ""
"This sets the default type of Excellon zeros.\n"
"If LZ then Leading Zeros are kept and\n"
"Trailing Zeros are removed.\n"
"If TZ is checked then Trailing Zeros are kept\n"
"and Leading Zeros are removed."

#: flatcamGUI/FlatCAMGUI.py:5031
#| msgid "A list of Geometry Editor parameters."
msgid "A list of Excellon Editor parameters."
msgstr "A list of Excellon Editor parameters."

#: flatcamGUI/FlatCAMGUI.py:5041
#| msgid ""
#| "Set the number of selected geometry\n"
#| "items above which the utility geometry\n"
#| "becomes just a selection rectangle.\n"
#| "Increases the performance when moving a\n"
#| "large number of geometric elements."
msgid ""
"Set the number of selected Excellon geometry\n"
"items above which the utility geometry\n"
"becomes just a selection rectangle.\n"
"Increases the performance when moving a\n"
"large number of geometric elements."
msgstr ""
"Set the number of selected Excellon geometry\n"
"items above which the utility geometry\n"
"becomes just a selection rectangle.\n"
"Increases the performance when moving a\n"
"large number of geometric elements."

#: flatcamGUI/FlatCAMGUI.py:5053
#| msgid "Tool Dia:"
msgid "New Tool Dia:"
msgstr "New Tool Dia:"

#: flatcamGUI/FlatCAMGUI.py:5076
#| msgid "<b>Paint Area:</b>"
msgid "<b>Linear Drill Array:</b>"
msgstr "<b>Linear Drill Array:</b>"

#: flatcamGUI/FlatCAMGUI.py:5080
#| msgid "Linear"
msgid "Linear Dir.:"
msgstr "Linear Dir.:"

#: flatcamGUI/FlatCAMGUI.py:5116
#| msgid "<b>Paint Area:</b>"
msgid "<b>Circular Drill Array:</b>"
msgstr "<b>Circular Drill Array:</b>"

#: flatcamGUI/FlatCAMGUI.py:5120
#| msgid "Circular"
msgid "Circular Dir.:"
msgstr "Circular Dir.:"

#: flatcamGUI/FlatCAMGUI.py:5122
#| msgid ""
#| "Direction for circular array.Can be CW = clockwise or CCW = counter "
#| "clockwise."
msgid ""
"Direction for circular array.\n"
"Can be CW = clockwise or CCW = counter clockwise."
msgstr ""
"Direction for circular array.\n"
"Can be CW = clockwise or CCW = counter clockwise."

#: flatcamGUI/FlatCAMGUI.py:5133
#| msgid "Tip Angle:"
msgid "Circ. Angle:"
msgstr "Circ. Angle:"

#: flatcamGUI/FlatCAMGUI.py:5150
msgid "Geometry General"
msgstr "Geometry General"

#: flatcamGUI/FlatCAMGUI.py:5168
msgid ""
"The number of circle steps for <b>Geometry</b> \n"
"circle and arc shapes linear approximation."
msgstr ""
"The number of circle steps for <b>Geometry</b> \n"
"circle and arc shapes linear approximation."

#: flatcamGUI/FlatCAMGUI.py:5176
msgid "<b>Tools</b>"
msgstr "<b>Tools</b>"

#: flatcamGUI/FlatCAMGUI.py:5183
msgid "Tool dia:                   "
msgstr "Tool dia:                   "

#: flatcamGUI/FlatCAMGUI.py:5185
msgid ""
"The diameter of the cutting\n"
"tool.."
msgstr ""
"The diameter of the cutting\n"
"tool.."

#: flatcamGUI/FlatCAMGUI.py:5200
msgid "Geometry Options"
msgstr "Geometry Options"

#: flatcamGUI/FlatCAMGUI.py:5205
msgid "<b>Create CNC Job:</b>"
msgstr "<b>Create CNC Job:</b>"

#: flatcamGUI/FlatCAMGUI.py:5207
msgid ""
"Create a CNC Job object\n"
"tracing the contours of this\n"
"Geometry object."
msgstr ""
"Create a CNC Job object\n"
"tracing the contours of this\n"
"Geometry object."

#: flatcamGUI/FlatCAMGUI.py:5219 flatcamGUI/ObjectUI.py:1065
msgid ""
"Cutting depth (negative)\n"
"below the copper surface."
msgstr ""
"Cutting depth (negative)\n"
"below the copper surface."

#: flatcamGUI/FlatCAMGUI.py:5227
msgid "Multidepth"
msgstr "Multidepth"

#: flatcamGUI/FlatCAMGUI.py:5229
msgid "Multidepth usage: True or False."
msgstr "Multidepth usage: True or False."

#: flatcamGUI/FlatCAMGUI.py:5234
msgid "Depth/Pass:"
msgstr "Depth/Pass:"

#: flatcamGUI/FlatCAMGUI.py:5236
msgid ""
"The depth to cut on each pass,\n"
"when multidepth is enabled.\n"
"It has positive value although\n"
"it is a fraction from the depth\n"
"which has negative value."
msgstr ""
"The depth to cut on each pass,\n"
"when multidepth is enabled.\n"
"It has positive value although\n"
"it is a fraction from the depth\n"
"which has negative value."

#: flatcamGUI/FlatCAMGUI.py:5252 flatcamGUI/ObjectUI.py:1101
msgid ""
"Height of the tool when\n"
"moving without cutting."
msgstr ""
"Height of the tool when\n"
"moving without cutting."

#: flatcamGUI/FlatCAMGUI.py:5279 flatcamGUI/ObjectUI.py:1156
msgid "Feed Rate X-Y:"
msgstr "Feed Rate X-Y:"

#: flatcamGUI/FlatCAMGUI.py:5281 flatcamGUI/ObjectUI.py:1159
msgid ""
"Cutting speed in the XY\n"
"plane in units per minute"
msgstr ""
"Cutting speed in the XY\n"
"plane in units per minute"

#: flatcamGUI/FlatCAMGUI.py:5289
msgid "Feed Rate Z:"
msgstr "Feed Rate Z:"

#: flatcamGUI/FlatCAMGUI.py:5291
msgid ""
"Cutting speed in the XY\n"
"plane in units per minute.\n"
"It is called also Plunge."
msgstr ""
"Cutting speed in the XY\n"
"plane in units per minute.\n"
"It is called also Plunge."

#: flatcamGUI/FlatCAMGUI.py:5300 flatcamGUI/ObjectUI.py:682
#: flatcamGUI/ObjectUI.py:1211
msgid "Spindle speed:"
msgstr "Spindle speed:"

#: flatcamGUI/FlatCAMGUI.py:5343
msgid ""
"The postprocessor file that dictates\n"
"Machine Code output."
msgstr ""
"The postprocessor file that dictates\n"
"Machine Code output."

#: flatcamGUI/FlatCAMGUI.py:5359
msgid "Geometry Adv. Options"
msgstr "Geometry Adv. Options"

#: flatcamGUI/FlatCAMGUI.py:5366
msgid ""
"Parameters to create a CNC Job object\n"
"tracing the contours of a Geometry object."
msgstr ""
"Parameters to create a CNC Job object\n"
"tracing the contours of a Geometry object."

#: flatcamGUI/FlatCAMGUI.py:5386
msgid ""
"Height of the tool just after starting the work.\n"
"Delete the value if you don't need this feature."
msgstr ""
"Height of the tool just after starting the work.\n"
"Delete the value if you don't need this feature."

#: flatcamGUI/FlatCAMGUI.py:5406
msgid ""
"Cutting speed in the XY plane\n"
"(in units per minute).\n"
"This is for the rapid move G00.\n"
"It is useful only for Marlin,\n"
"ignore for any other cases."
msgstr ""
"Cutting speed in the XY plane\n"
"(in units per minute).\n"
"This is for the rapid move G00.\n"
"It is useful only for Marlin,\n"
"ignore for any other cases."

#: flatcamGUI/FlatCAMGUI.py:5418
msgid "Re-cut 1st pt."
msgstr "Re-cut 1st pt."

#: flatcamGUI/FlatCAMGUI.py:5420 flatcamGUI/ObjectUI.py:1202
msgid ""
"In order to remove possible\n"
"copper leftovers where first cut\n"
"meet with last cut, we generate an\n"
"extended cut over the first cut section."
msgstr ""
"In order to remove possible\n"
"copper leftovers where first cut\n"
"meet with last cut, we generate an\n"
"extended cut over the first cut section."

#: flatcamGUI/FlatCAMGUI.py:5459
msgid "Seg. X size:"
msgstr "Seg. X size:"

#: flatcamGUI/FlatCAMGUI.py:5461
msgid ""
"The size of the trace segment on the X axis.\n"
"Useful for auto-leveling.\n"
"A value of 0 means no segmentation on the X axis."
msgstr ""
"The size of the trace segment on the X axis.\n"
"Useful for auto-leveling.\n"
"A value of 0 means no segmentation on the X axis."

#: flatcamGUI/FlatCAMGUI.py:5470
msgid "Seg. Y size:"
msgstr "Seg. Y size:"

#: flatcamGUI/FlatCAMGUI.py:5472
msgid ""
"The size of the trace segment on the Y axis.\n"
"Useful for auto-leveling.\n"
"A value of 0 means no segmentation on the Y axis."
msgstr ""
"The size of the trace segment on the Y axis.\n"
"Useful for auto-leveling.\n"
"A value of 0 means no segmentation on the Y axis."

#: flatcamGUI/FlatCAMGUI.py:5488
msgid "Geometry Editor"
msgstr "Geometry Editor"

#: flatcamGUI/FlatCAMGUI.py:5493
msgid "A list of Geometry Editor parameters."
msgstr "A list of Geometry Editor parameters."

#: flatcamGUI/FlatCAMGUI.py:5503
msgid ""
"Set the number of selected geometry\n"
"items above which the utility geometry\n"
"becomes just a selection rectangle.\n"
"Increases the performance when moving a\n"
"large number of geometric elements."
msgstr ""
"Set the number of selected geometry\n"
"items above which the utility geometry\n"
"becomes just a selection rectangle.\n"
"Increases the performance when moving a\n"
"large number of geometric elements."

#: flatcamGUI/FlatCAMGUI.py:5522
msgid "CNC Job General"
msgstr "CNC Job General"

#: flatcamGUI/FlatCAMGUI.py:5535 flatcamGUI/ObjectUI.py:544
#: flatcamGUI/ObjectUI.py:877 flatcamGUI/ObjectUI.py:1447
msgid "Plot Object"
msgstr "Plot Object"

#: flatcamGUI/FlatCAMGUI.py:5542
msgid "Plot kind:"
msgstr "Plot kind:"

#: flatcamGUI/FlatCAMGUI.py:5544 flatcamGUI/ObjectUI.py:1356
msgid ""
"This selects the kind of geometries on the canvas to plot.\n"
"Those can be either of type 'Travel' which means the moves\n"
"above the work piece or it can be of type 'Cut',\n"
"which means the moves that cut into the material."
msgstr ""
"This selects the kind of geometries on the canvas to plot.\n"
"Those can be either of type 'Travel' which means the moves\n"
"above the work piece or it can be of type 'Cut',\n"
"which means the moves that cut into the material."

#: flatcamGUI/FlatCAMGUI.py:5561
msgid "Display Annotation:"
msgstr "Display Annotation:"

#: flatcamGUI/FlatCAMGUI.py:5563 flatcamGUI/ObjectUI.py:1372
msgid ""
"This selects if to display text annotation on the plot.\n"
"When checked it will display numbers in order for each end\n"
"of a travel line."
msgstr ""
"This selects if to display text annotation on the plot.\n"
"When checked it will display numbers in order for each end\n"
"of a travel line."

#: flatcamGUI/FlatCAMGUI.py:5575
msgid "Annotation Size:"
msgstr "Annotation Size:"

#: flatcamGUI/FlatCAMGUI.py:5577
msgid "The font size of the annotation text. In pixels."
msgstr "The font size of the annotation text. In pixels."

#: flatcamGUI/FlatCAMGUI.py:5585
msgid "Annotation Color:"
msgstr "Annotation Color:"

#: flatcamGUI/FlatCAMGUI.py:5587
#| msgid "Set the color for the shape."
msgid "Set the font color for the annotation texts."
msgstr "Set the font color for the annotation texts."

#: flatcamGUI/FlatCAMGUI.py:5610
msgid ""
"The number of circle steps for <b>GCode</b> \n"
"circle and arc shapes linear approximation."
msgstr ""
"The number of circle steps for <b>GCode</b> \n"
"circle and arc shapes linear approximation."

#: flatcamGUI/FlatCAMGUI.py:5620
msgid ""
"Diameter of the tool to be\n"
"rendered in the plot."
msgstr ""
"Diameter of the tool to be\n"
"rendered in the plot."

#: flatcamGUI/FlatCAMGUI.py:5628
msgid "Coords dec.:"
msgstr "Coords dec.:"

#: flatcamGUI/FlatCAMGUI.py:5630
msgid ""
"The number of decimals to be used for \n"
"the X, Y, Z coordinates in CNC code (GCODE, etc.)"
msgstr ""
"The number of decimals to be used for \n"
"the X, Y, Z coordinates in CNC code (GCODE, etc.)"

#: flatcamGUI/FlatCAMGUI.py:5638
msgid "Feedrate dec.:"
msgstr "Feedrate dec.:"

#: flatcamGUI/FlatCAMGUI.py:5640
msgid ""
"The number of decimals to be used for \n"
"the Feedrate parameter in CNC code (GCODE, etc.)"
msgstr ""
"The number of decimals to be used for \n"
"the Feedrate parameter in CNC code (GCODE, etc.)"

#: flatcamGUI/FlatCAMGUI.py:5655
msgid "CNC Job Options"
msgstr "CNC Job Options"

#: flatcamGUI/FlatCAMGUI.py:5658 flatcamGUI/FlatCAMGUI.py:5699
msgid "<b>Export G-Code:</b>"
msgstr "<b>Export G-Code:</b>"

#: flatcamGUI/FlatCAMGUI.py:5660 flatcamGUI/FlatCAMGUI.py:5701
#: flatcamGUI/ObjectUI.py:1483
msgid ""
"Export and save G-Code to\n"
"make this object to a file."
msgstr ""
"Export and save G-Code to\n"
"make this object to a file."

#: flatcamGUI/FlatCAMGUI.py:5666
msgid "Prepend to G-Code:"
msgstr "Prepend to G-Code:"

#: flatcamGUI/FlatCAMGUI.py:5668
msgid ""
"Type here any G-Code commands you would\n"
"like to add at the beginning of the G-Code file."
msgstr ""
"Type here any G-Code commands you would\n"
"like to add at the beginning of the G-Code file."

#: flatcamGUI/FlatCAMGUI.py:5677
msgid "Append to G-Code:"
msgstr "Append to G-Code:"

#: flatcamGUI/FlatCAMGUI.py:5679 flatcamGUI/ObjectUI.py:1505
msgid ""
"Type here any G-Code commands you would\n"
"like to append to the generated file.\n"
"I.e.: M2 (End of program)"
msgstr ""
"Type here any G-Code commands you would\n"
"like to append to the generated file.\n"
"I.e.: M2 (End of program)"

#: flatcamGUI/FlatCAMGUI.py:5696
msgid "CNC Job Adv. Options"
msgstr "CNC Job Adv. Options"

#: flatcamGUI/FlatCAMGUI.py:5707 flatcamGUI/ObjectUI.py:1523
msgid "Toolchange G-Code:"
msgstr "Toolchange G-Code:"

#: flatcamGUI/FlatCAMGUI.py:5709
msgid ""
"Type here any G-Code commands you would\n"
"like to be executed when Toolchange event is encountered.\n"
"This will constitute a Custom Toolchange GCode,\n"
"or a Toolchange Macro."
msgstr ""
"Type here any G-Code commands you would\n"
"like to be executed when Toolchange event is encountered.\n"
"This will constitute a Custom Toolchange GCode,\n"
"or a Toolchange Macro."

#: flatcamGUI/FlatCAMGUI.py:5723 flatcamGUI/ObjectUI.py:1545
msgid "Use Toolchange Macro"
msgstr "Use Toolchange Macro"

#: flatcamGUI/FlatCAMGUI.py:5725 flatcamGUI/ObjectUI.py:1548
msgid ""
"Check this box if you want to use\n"
"a Custom Toolchange GCode (macro)."
msgstr ""
"Check this box if you want to use\n"
"a Custom Toolchange GCode (macro)."

#: flatcamGUI/FlatCAMGUI.py:5737 flatcamGUI/ObjectUI.py:1557
msgid ""
"A list of the FlatCAM variables that can be used\n"
"in the Toolchange event.\n"
"They have to be surrounded by the '%' symbol"
msgstr ""
"A list of the FlatCAM variables that can be used\n"
"in the Toolchange event.\n"
"They have to be surrounded by the '%' symbol"

#: flatcamGUI/FlatCAMGUI.py:5744 flatcamGUI/ObjectUI.py:1564
msgid "Parameters"
msgstr "Parameters"

#: flatcamGUI/FlatCAMGUI.py:5747 flatcamGUI/ObjectUI.py:1567
msgid "FlatCAM CNC parameters"
msgstr "FlatCAM CNC parameters"

#: flatcamGUI/FlatCAMGUI.py:5748 flatcamGUI/ObjectUI.py:1568
msgid "tool = tool number"
msgstr "tool = tool number"

#: flatcamGUI/FlatCAMGUI.py:5749 flatcamGUI/ObjectUI.py:1569
msgid "tooldia = tool diameter"
msgstr "tooldia = tool diameter"

#: flatcamGUI/FlatCAMGUI.py:5750 flatcamGUI/ObjectUI.py:1570
msgid "t_drills = for Excellon, total number of drills"
msgstr "t_drills = for Excellon, total number of drills"

#: flatcamGUI/FlatCAMGUI.py:5751 flatcamGUI/ObjectUI.py:1571
msgid "x_toolchange = X coord for Toolchange"
msgstr "x_toolchange = X coord for Toolchange"

#: flatcamGUI/FlatCAMGUI.py:5752 flatcamGUI/ObjectUI.py:1572
msgid "y_toolchange = Y coord for Toolchange"
msgstr "y_toolchange = Y coord for Toolchange"

#: flatcamGUI/FlatCAMGUI.py:5753 flatcamGUI/ObjectUI.py:1573
msgid "z_toolchange = Z coord for Toolchange"
msgstr "z_toolchange = Z coord for Toolchange"

#: flatcamGUI/FlatCAMGUI.py:5754
msgid "z_cut = Z depth for the cut"
msgstr "z_cut = Z depth for the cut"

#: flatcamGUI/FlatCAMGUI.py:5755
msgid "z_move = Z height for travel"
msgstr "z_move = Z height for travel"

#: flatcamGUI/FlatCAMGUI.py:5756 flatcamGUI/ObjectUI.py:1576
msgid "z_depthpercut = the step value for multidepth cut"
msgstr "z_depthpercut = the step value for multidepth cut"

#: flatcamGUI/FlatCAMGUI.py:5757 flatcamGUI/ObjectUI.py:1577
msgid "spindlesspeed = the value for the spindle speed"
msgstr "spindlesspeed = the value for the spindle speed"

#: flatcamGUI/FlatCAMGUI.py:5759 flatcamGUI/ObjectUI.py:1578
msgid "dwelltime = time to dwell to allow the spindle to reach it's set RPM"
msgstr "dwelltime = time to dwell to allow the spindle to reach it's set RPM"

#: flatcamGUI/FlatCAMGUI.py:5780
msgid "NCC Tool Options"
msgstr "NCC Tool Options"

#: flatcamGUI/FlatCAMGUI.py:5793 flatcamGUI/FlatCAMGUI.py:6523
msgid "Tools dia:"
msgstr "Tools dia:"

#: flatcamGUI/FlatCAMGUI.py:5795
msgid "Diameters of the cutting tools, separated by ','"
msgstr "Diameters of the cutting tools, separated by ','"

#: flatcamGUI/FlatCAMGUI.py:5803 flatcamTools/ToolNonCopperClear.py:167
#, python-format
msgid ""
"How much (fraction) of the tool width to overlap each tool pass.\n"
"Example:\n"
"A value here of 0.25 means 25% from the tool diameter found above.\n"
"\n"
"Adjust the value starting with lower values\n"
"and increasing it if areas that should be cleared are still \n"
"not cleared.\n"
"Lower values = faster processing, faster execution on PCB.\n"
"Higher values = slow processing and slow execution on CNC\n"
"due of too many paths."
msgstr ""
"How much (fraction) of the tool width to overlap each tool pass.\n"
"Example:\n"
"A value here of 0.25 means 25% from the tool diameter found above.\n"
"\n"
"Adjust the value starting with lower values\n"
"and increasing it if areas that should be cleared are still \n"
"not cleared.\n"
"Lower values = faster processing, faster execution on PCB.\n"
"Higher values = slow processing and slow execution on CNC\n"
"due of too many paths."

#: flatcamGUI/FlatCAMGUI.py:5819 flatcamTools/ToolNonCopperClear.py:183
msgid "Bounding box margin."
msgstr "Bounding box margin."

#: flatcamGUI/FlatCAMGUI.py:5828 flatcamTools/ToolNonCopperClear.py:192
#: flatcamTools/ToolPaint.py:190
msgid ""
"Algorithm for non-copper clearing:<BR><B>Standard</B>: Fixed step inwards."
"<BR><B>Seed-based</B>: Outwards from seed.<BR><B>Line-based</B>: Parallel "
"lines."
msgstr ""
"Algorithm for non-copper clearing:<BR><B>Standard</B>: Fixed step inwards."
"<BR><B>Seed-based</B>: Outwards from seed.<BR><B>Line-based</B>: Parallel "
"lines."

#: flatcamGUI/FlatCAMGUI.py:5860 flatcamTools/ToolNonCopperClear.py:224
#: flatcamTools/ToolPaint.py:222
msgid "Rest M.:"
msgstr "Rest M.:"

#: flatcamGUI/FlatCAMGUI.py:5862
msgid ""
"If checked, use 'rest machining'.\n"
"Basically it will clear copper outside PCB features,\n"
"using the biggest tool and continue with the next tools,\n"
"from bigger to smaller, to clear areas of copper that\n"
"could not be cleared by previous tool.\n"
"If not checked, use the standard algorithm."
msgstr ""
"If checked, use 'rest machining'.\n"
"Basically it will clear copper outside PCB features,\n"
"using the biggest tool and continue with the next tools,\n"
"from bigger to smaller, to clear areas of copper that\n"
"could not be cleared by previous tool.\n"
"If not checked, use the standard algorithm."

#: flatcamGUI/FlatCAMGUI.py:5881
msgid "Cutout Tool Options"
msgstr "Cutout Tool Options"

#: flatcamGUI/FlatCAMGUI.py:5886 flatcamGUI/ObjectUI.py:402
msgid ""
"Create toolpaths to cut around\n"
"the PCB and separate it from\n"
"the original board."
msgstr ""
"Create toolpaths to cut around\n"
"the PCB and separate it from\n"
"the original board."

#: flatcamGUI/FlatCAMGUI.py:5905
msgid ""
"Distance from objects at which\n"
"to draw the cutout."
msgstr ""
"Distance from objects at which\n"
"to draw the cutout."

#: flatcamGUI/FlatCAMGUI.py:5912 flatcamTools/ToolCutOut.py:96
msgid "Gap size:"
msgstr "Gap size:"

#: flatcamGUI/FlatCAMGUI.py:5914
msgid ""
"Size of the gaps in the toolpath\n"
"that will remain to hold the\n"
"board in place."
msgstr ""
"Size of the gaps in the toolpath\n"
"that will remain to hold the\n"
"board in place."

#: flatcamGUI/FlatCAMGUI.py:5922 flatcamTools/ToolCutOut.py:134
msgid "Gaps:"
msgstr "Gaps:"

#: flatcamGUI/FlatCAMGUI.py:5924
msgid ""
"Number of bridge gaps used for the cutout.\n"
"There can be maximum 8 bridges/gaps.\n"
"The choices are:\n"
"- lr    - left + right\n"
"- tb    - top + bottom\n"
"- 4     - left + right +top + bottom\n"
"- 2lr   - 2*left + 2*right\n"
"- 2tb  - 2*top + 2*bottom\n"
"- 8     - 2*left + 2*right +2*top + 2*bottom"
msgstr ""
"Number of bridge gaps used for the cutout.\n"
"There can be maximum 8 bridges/gaps.\n"
"The choices are:\n"
"- lr    - left + right\n"
"- tb    - top + bottom\n"
"- 4     - left + right +top + bottom\n"
"- 2lr   - 2*left + 2*right\n"
"- 2tb  - 2*top + 2*bottom\n"
"- 8     - 2*left + 2*right +2*top + 2*bottom"

#: flatcamGUI/FlatCAMGUI.py:5945 flatcamTools/ToolCutOut.py:115
msgid "Convex Sh.:"
msgstr "Convex Sh.:"

#: flatcamGUI/FlatCAMGUI.py:5947
msgid "Create a convex shape surrounding the entire PCB."
msgstr "Create a convex shape surrounding the entire PCB."

#: flatcamGUI/FlatCAMGUI.py:5960
msgid "2Sided Tool Options"
msgstr "2Sided Tool Options"

#: flatcamGUI/FlatCAMGUI.py:5965
msgid ""
"A tool to help in creating a double sided\n"
"PCB using alignment holes."
msgstr ""
"A tool to help in creating a double sided\n"
"PCB using alignment holes."

#: flatcamGUI/FlatCAMGUI.py:5975 flatcamTools/ToolDblSided.py:235
msgid "Drill diam.:"
msgstr "Drill diam.:"

#: flatcamGUI/FlatCAMGUI.py:5977 flatcamTools/ToolDblSided.py:226
#: flatcamTools/ToolDblSided.py:237
msgid "Diameter of the drill for the alignment holes."
msgstr "Diameter of the drill for the alignment holes."

#: flatcamGUI/FlatCAMGUI.py:5986 flatcamTools/ToolDblSided.py:120
msgid "Mirror Axis:"
msgstr "Mirror Axis:"

#: flatcamGUI/FlatCAMGUI.py:5988 flatcamTools/ToolDblSided.py:122
msgid "Mirror vertically (X) or horizontally (Y)."
msgstr "Mirror vertically (X) or horizontally (Y)."

#: flatcamGUI/FlatCAMGUI.py:5999 flatcamTools/ToolDblSided.py:133
msgid "Axis Ref:"
msgstr "Axis Ref:"

#: flatcamGUI/FlatCAMGUI.py:6001
msgid ""
"The axis should pass through a <b>point</b> or cut\n"
" a specified <b>box</b> (in a Geometry object) in \n"
"the middle."
msgstr ""
"The axis should pass through a <b>point</b> or cut\n"
" a specified <b>box</b> (in a Geometry object) in \n"
"the middle."

#: flatcamGUI/FlatCAMGUI.py:6017
msgid "Paint Tool Options"
msgstr "Paint Tool Options"

#: flatcamGUI/FlatCAMGUI.py:6024 flatcamGUI/ObjectUI.py:1305
msgid ""
"Creates tool paths to cover the\n"
"whole area of a polygon (remove\n"
"all copper). You will be asked\n"
"to click on the desired polygon."
msgstr ""
"Creates tool paths to cover the\n"
"whole area of a polygon (remove\n"
"all copper). You will be asked\n"
"to click on the desired polygon."

#: flatcamGUI/FlatCAMGUI.py:6048
msgid ""
"How much (fraction) of the tool\n"
"width to overlap each tool pass."
msgstr ""
"How much (fraction) of the tool\n"
"width to overlap each tool pass."

#: flatcamGUI/FlatCAMGUI.py:6102 flatcamTools/ToolPaint.py:237
msgid "Selection:"
msgstr "Selection:"

#: flatcamGUI/FlatCAMGUI.py:6104
msgid "How to select the polygons to paint."
msgstr "How to select the polygons to paint."

#: flatcamGUI/FlatCAMGUI.py:6122
msgid "Film Tool Options"
msgstr "Film Tool Options"

#: flatcamGUI/FlatCAMGUI.py:6127
msgid ""
"Create a PCB film from a Gerber or Geometry\n"
"FlatCAM object.\n"
"The file is saved in SVG format."
msgstr ""
"Create a PCB film from a Gerber or Geometry\n"
"FlatCAM object.\n"
"The file is saved in SVG format."

#: flatcamGUI/FlatCAMGUI.py:6138 flatcamTools/ToolFilm.py:116
msgid "Film Type:"
msgstr "Film Type:"

#: flatcamGUI/FlatCAMGUI.py:6140 flatcamTools/ToolFilm.py:118
msgid ""
"Generate a Positive black film or a Negative film.\n"
"Positive means that it will print the features\n"
"with black on a white canvas.\n"
"Negative means that it will print the features\n"
"with white on a black canvas.\n"
"The Film format is SVG."
msgstr ""
"Generate a Positive black film or a Negative film.\n"
"Positive means that it will print the features\n"
"with black on a white canvas.\n"
"Negative means that it will print the features\n"
"with white on a black canvas.\n"
"The Film format is SVG."

#: flatcamGUI/FlatCAMGUI.py:6151 flatcamTools/ToolFilm.py:130
msgid "Border:"
msgstr "Border:"

#: flatcamGUI/FlatCAMGUI.py:6153 flatcamTools/ToolFilm.py:132
msgid ""
"Specify a border around the object.\n"
"Only for negative film.\n"
"It helps if we use as a Box Object the same \n"
"object as in Film Object. It will create a thick\n"
"black bar around the actual print allowing for a\n"
"better delimitation of the outline features which are of\n"
"white color like the rest and which may confound with the\n"
"surroundings if not for this border."
msgstr ""
"Specify a border around the object.\n"
"Only for negative film.\n"
"It helps if we use as a Box Object the same \n"
"object as in Film Object. It will create a thick\n"
"black bar around the actual print allowing for a\n"
"better delimitation of the outline features which are of\n"
"white color like the rest and which may confound with the\n"
"surroundings if not for this border."

#: flatcamGUI/FlatCAMGUI.py:6166 flatcamTools/ToolFilm.py:144
msgid "Scale Stroke:"
msgstr "Scale Stroke:"

#: flatcamGUI/FlatCAMGUI.py:6168 flatcamTools/ToolFilm.py:146
msgid ""
"Scale the line stroke thickness of each feature in the SVG file.\n"
"It means that the line that envelope each SVG feature will be thicker or "
"thinner,\n"
"therefore the fine features may be more affected by this parameter."
msgstr ""
"Scale the line stroke thickness of each feature in the SVG file.\n"
"It means that the line that envelope each SVG feature will be thicker or "
"thinner,\n"
"therefore the fine features may be more affected by this parameter."

#: flatcamGUI/FlatCAMGUI.py:6183
msgid "Panelize Tool Options"
msgstr "Panelize Tool Options"

#: flatcamGUI/FlatCAMGUI.py:6188
msgid ""
"Create an object that contains an array of (x, y) elements,\n"
"each element is a copy of the source object spaced\n"
"at a X distance, Y distance of each other."
msgstr ""
"Create an object that contains an array of (x, y) elements,\n"
"each element is a copy of the source object spaced\n"
"at a X distance, Y distance of each other."

#: flatcamGUI/FlatCAMGUI.py:6199 flatcamTools/ToolPanelize.py:147
msgid "Spacing cols:"
msgstr "Spacing cols:"

#: flatcamGUI/FlatCAMGUI.py:6201 flatcamTools/ToolPanelize.py:149
msgid ""
"Spacing between columns of the desired panel.\n"
"In current units."
msgstr ""
"Spacing between columns of the desired panel.\n"
"In current units."

#: flatcamGUI/FlatCAMGUI.py:6209 flatcamTools/ToolPanelize.py:156
msgid "Spacing rows:"
msgstr "Spacing rows:"

#: flatcamGUI/FlatCAMGUI.py:6211 flatcamTools/ToolPanelize.py:158
msgid ""
"Spacing between rows of the desired panel.\n"
"In current units."
msgstr ""
"Spacing between rows of the desired panel.\n"
"In current units."

#: flatcamGUI/FlatCAMGUI.py:6219 flatcamTools/ToolPanelize.py:165
msgid "Columns:"
msgstr "Columns:"

#: flatcamGUI/FlatCAMGUI.py:6221 flatcamTools/ToolPanelize.py:167
msgid "Number of columns of the desired panel"
msgstr "Number of columns of the desired panel"

#: flatcamGUI/FlatCAMGUI.py:6228 flatcamTools/ToolPanelize.py:173
msgid "Rows:"
msgstr "Rows:"

#: flatcamGUI/FlatCAMGUI.py:6230 flatcamTools/ToolPanelize.py:175
msgid "Number of rows of the desired panel"
msgstr "Number of rows of the desired panel"

#: flatcamGUI/FlatCAMGUI.py:6238
msgid "Panel Type:"
msgstr "Panel Type:"

#: flatcamGUI/FlatCAMGUI.py:6240
msgid ""
"Choose the type of object for the panel object:\n"
"- Gerber\n"
"- Geometry"
msgstr ""
"Choose the type of object for the panel object:\n"
"- Gerber\n"
"- Geometry"

#: flatcamGUI/FlatCAMGUI.py:6249
msgid "Constrain within:"
msgstr "Constrain within:"

#: flatcamGUI/FlatCAMGUI.py:6251 flatcamTools/ToolPanelize.py:195
msgid ""
"Area define by DX and DY within to constrain the panel.\n"
"DX and DY values are in current units.\n"
"Regardless of how many columns and rows are desired,\n"
"the final panel will have as many columns and rows as\n"
"they fit completely within selected area."
msgstr ""
"Area define by DX and DY within to constrain the panel.\n"
"DX and DY values are in current units.\n"
"Regardless of how many columns and rows are desired,\n"
"the final panel will have as many columns and rows as\n"
"they fit completely within selected area."

#: flatcamGUI/FlatCAMGUI.py:6260 flatcamTools/ToolPanelize.py:204
msgid "Width (DX):"
msgstr "Width (DX):"

#: flatcamGUI/FlatCAMGUI.py:6262 flatcamTools/ToolPanelize.py:206
msgid ""
"The width (DX) within which the panel must fit.\n"
"In current units."
msgstr ""
"The width (DX) within which the panel must fit.\n"
"In current units."

#: flatcamGUI/FlatCAMGUI.py:6269 flatcamTools/ToolPanelize.py:212
msgid "Height (DY):"
msgstr "Height (DY):"

#: flatcamGUI/FlatCAMGUI.py:6271 flatcamTools/ToolPanelize.py:214
msgid ""
"The height (DY)within which the panel must fit.\n"
"In current units."
msgstr ""
"The height (DY)within which the panel must fit.\n"
"In current units."

#: flatcamGUI/FlatCAMGUI.py:6285
msgid "Calculators Tool Options"
msgstr "Calculators Tool Options"

#: flatcamGUI/FlatCAMGUI.py:6288
msgid "<b>V-Shape Tool Calculator:</b>"
msgstr "<b>V-Shape Tool Calculator:</b>"

#: flatcamGUI/FlatCAMGUI.py:6290
msgid ""
"Calculate the tool diameter for a given V-shape tool,\n"
"having the tip diameter, tip angle and\n"
"depth-of-cut as parameters."
msgstr ""
"Calculate the tool diameter for a given V-shape tool,\n"
"having the tip diameter, tip angle and\n"
"depth-of-cut as parameters."

#: flatcamGUI/FlatCAMGUI.py:6301 flatcamTools/ToolCalculators.py:94
msgid "Tip Diameter:"
msgstr "Tip Diameter:"

#: flatcamGUI/FlatCAMGUI.py:6303
msgid ""
"This is the tool tip diameter.\n"
"It is specified by manufacturer."
msgstr ""
"This is the tool tip diameter.\n"
"It is specified by manufacturer."

#: flatcamGUI/FlatCAMGUI.py:6311
msgid "Tip angle:"
msgstr "Tip angle:"

#: flatcamGUI/FlatCAMGUI.py:6313
msgid ""
"This is the angle on the tip of the tool.\n"
"It is specified by manufacturer."
msgstr ""
"This is the angle on the tip of the tool.\n"
"It is specified by manufacturer."

#: flatcamGUI/FlatCAMGUI.py:6323
msgid ""
"This is depth to cut into material.\n"
"In the CNCJob object it is the CutZ parameter."
msgstr ""
"This is depth to cut into material.\n"
"In the CNCJob object it is the CutZ parameter."

#: flatcamGUI/FlatCAMGUI.py:6330
msgid "<b>ElectroPlating Calculator:</b>"
msgstr "<b>ElectroPlating Calculator:</b>"

#: flatcamGUI/FlatCAMGUI.py:6332 flatcamTools/ToolCalculators.py:152
msgid ""
"This calculator is useful for those who plate the via/pad/drill holes,\n"
"using a method like grahite ink or calcium hypophosphite ink or palladium "
"chloride."
msgstr ""
"This calculator is useful for those who plate the via/pad/drill holes,\n"
"using a method like grahite ink or calcium hypophosphite ink or palladium "
"chloride."

#: flatcamGUI/FlatCAMGUI.py:6342 flatcamTools/ToolCalculators.py:161
msgid "Board Length:"
msgstr "Board Length:"

#: flatcamGUI/FlatCAMGUI.py:6344 flatcamTools/ToolCalculators.py:165
msgid "This is the board length. In centimeters."
msgstr "This is the board length. In centimeters."

#: flatcamGUI/FlatCAMGUI.py:6350 flatcamTools/ToolCalculators.py:167
msgid "Board Width:"
msgstr "Board Width:"

#: flatcamGUI/FlatCAMGUI.py:6352 flatcamTools/ToolCalculators.py:171
msgid "This is the board width.In centimeters."
msgstr "This is the board width.In centimeters."

#: flatcamGUI/FlatCAMGUI.py:6357 flatcamTools/ToolCalculators.py:173
msgid "Current Density:"
msgstr "Current Density:"

#: flatcamGUI/FlatCAMGUI.py:6360 flatcamTools/ToolCalculators.py:177
msgid ""
"Current density to pass through the board. \n"
"In Amps per Square Feet ASF."
msgstr ""
"Current density to pass through the board. \n"
"In Amps per Square Feet ASF."

#: flatcamGUI/FlatCAMGUI.py:6366 flatcamTools/ToolCalculators.py:181
msgid "Copper Growth:"
msgstr "Copper Growth:"

#: flatcamGUI/FlatCAMGUI.py:6369 flatcamTools/ToolCalculators.py:185
msgid ""
"How thick the copper growth is intended to be.\n"
"In microns."
msgstr ""
"How thick the copper growth is intended to be.\n"
"In microns."

#: flatcamGUI/FlatCAMGUI.py:6382
msgid "Transform Tool Options"
msgstr "Transform Tool Options"

#: flatcamGUI/FlatCAMGUI.py:6387
msgid ""
"Various transformations that can be applied\n"
"on a FlatCAM object."
msgstr ""
"Various transformations that can be applied\n"
"on a FlatCAM object."

#: flatcamGUI/FlatCAMGUI.py:6397
msgid "Rotate Angle:"
msgstr "Rotate Angle:"

#: flatcamGUI/FlatCAMGUI.py:6399
msgid "Angle for rotation. In degrees."
msgstr "Angle for rotation. In degrees."

#: flatcamGUI/FlatCAMGUI.py:6406
msgid "Skew_X angle:"
msgstr "Skew_X angle:"

#: flatcamGUI/FlatCAMGUI.py:6408
msgid "Angle for Skew/Shear on X axis. In degrees."
msgstr "Angle for Skew/Shear on X axis. In degrees."

#: flatcamGUI/FlatCAMGUI.py:6415
msgid "Skew_Y angle:"
msgstr "Skew_Y angle:"

#: flatcamGUI/FlatCAMGUI.py:6417
msgid "Angle for Skew/Shear on Y axis. In degrees."
msgstr "Angle for Skew/Shear on Y axis. In degrees."

#: flatcamGUI/FlatCAMGUI.py:6424
msgid "Scale_X factor:"
msgstr "Scale_X factor:"

#: flatcamGUI/FlatCAMGUI.py:6426
msgid "Factor for scaling on X axis."
msgstr "Factor for scaling on X axis."

#: flatcamGUI/FlatCAMGUI.py:6433
msgid "Scale_Y factor:"
msgstr "Scale_Y factor:"

#: flatcamGUI/FlatCAMGUI.py:6435
msgid "Factor for scaling on Y axis."
msgstr "Factor for scaling on Y axis."

#: flatcamGUI/FlatCAMGUI.py:6443
msgid ""
"Scale the selected object(s)\n"
"using the Scale_X factor for both axis."
msgstr ""
"Scale the selected object(s)\n"
"using the Scale_X factor for both axis."

#: flatcamGUI/FlatCAMGUI.py:6451 flatcamTools/ToolTransform.py:210
msgid ""
"Scale the selected object(s)\n"
"using the origin reference when checked,\n"
"and the center of the biggest bounding box\n"
"of the selected objects when unchecked."
msgstr ""
"Scale the selected object(s)\n"
"using the origin reference when checked,\n"
"and the center of the biggest bounding box\n"
"of the selected objects when unchecked."

#: flatcamGUI/FlatCAMGUI.py:6460
msgid "Offset_X val:"
msgstr "Offset_X val:"

#: flatcamGUI/FlatCAMGUI.py:6462
msgid "Distance to offset on X axis. In current units."
msgstr "Distance to offset on X axis. In current units."

#: flatcamGUI/FlatCAMGUI.py:6469
msgid "Offset_Y val:"
msgstr "Offset_Y val:"

#: flatcamGUI/FlatCAMGUI.py:6471
msgid "Distance to offset on Y axis. In current units."
msgstr "Distance to offset on Y axis. In current units."

#: flatcamGUI/FlatCAMGUI.py:6477
msgid "Mirror Reference"
msgstr "Mirror Reference"

#: flatcamGUI/FlatCAMGUI.py:6479 flatcamTools/ToolTransform.py:314
msgid ""
"Flip the selected object(s)\n"
"around the point in Point Entry Field.\n"
"\n"
"The point coordinates can be captured by\n"
"left click on canvas together with pressing\n"
"SHIFT key. \n"
"Then click Add button to insert coordinates.\n"
"Or enter the coords in format (x, y) in the\n"
"Point Entry field and click Flip on X(Y)"
msgstr ""
"Flip the selected object(s)\n"
"around the point in Point Entry Field.\n"
"\n"
"The point coordinates can be captured by\n"
"left click on canvas together with pressing\n"
"SHIFT key. \n"
"Then click Add button to insert coordinates.\n"
"Or enter the coords in format (x, y) in the\n"
"Point Entry field and click Flip on X(Y)"

#: flatcamGUI/FlatCAMGUI.py:6490
msgid " Mirror Ref. Point:"
msgstr " Mirror Ref. Point:"

#: flatcamGUI/FlatCAMGUI.py:6492 flatcamTools/ToolTransform.py:327
msgid ""
"Coordinates in format (x, y) used as reference for mirroring.\n"
"The 'x' in (x, y) will be used when using Flip on X and\n"
"the 'y' in (x, y) will be used when using Flip on Y and"
msgstr ""
"Coordinates in format (x, y) used as reference for mirroring.\n"
"The 'x' in (x, y) will be used when using Flip on X and\n"
"the 'y' in (x, y) will be used when using Flip on Y and"

#: flatcamGUI/FlatCAMGUI.py:6509
msgid "SolderPaste Tool Options"
msgstr "SolderPaste Tool Options"

#: flatcamGUI/FlatCAMGUI.py:6514
msgid ""
"A tool to create GCode for dispensing\n"
"solder paste onto a PCB."
msgstr ""
"A tool to create GCode for dispensing\n"
"solder paste onto a PCB."

#: flatcamGUI/FlatCAMGUI.py:6525
msgid "Diameters of nozzle tools, separated by ','"
msgstr "Diameters of nozzle tools, separated by ','"

#: flatcamGUI/FlatCAMGUI.py:6532
msgid "<b>New Nozzle Dia:</b>"
msgstr "<b>New Nozzle Dia:</b>"

#: flatcamGUI/FlatCAMGUI.py:6534 flatcamTools/ToolSolderPaste.py:103
msgid "Diameter for the new Nozzle tool to add in the Tool Table"
msgstr "Diameter for the new Nozzle tool to add in the Tool Table"

#: flatcamGUI/FlatCAMGUI.py:6542 flatcamTools/ToolSolderPaste.py:166
msgid "Z Dispense Start:"
msgstr "Z Dispense Start:"

#: flatcamGUI/FlatCAMGUI.py:6544 flatcamTools/ToolSolderPaste.py:168
msgid "The height (Z) when solder paste dispensing starts."
msgstr "The height (Z) when solder paste dispensing starts."

#: flatcamGUI/FlatCAMGUI.py:6551 flatcamTools/ToolSolderPaste.py:174
msgid "Z Dispense:"
msgstr "Z Dispense:"

#: flatcamGUI/FlatCAMGUI.py:6553 flatcamTools/ToolSolderPaste.py:176
msgid "The height (Z) when doing solder paste dispensing."
msgstr "The height (Z) when doing solder paste dispensing."

#: flatcamGUI/FlatCAMGUI.py:6560 flatcamTools/ToolSolderPaste.py:183
msgid "Z Dispense Stop:"
msgstr "Z Dispense Stop:"

#: flatcamGUI/FlatCAMGUI.py:6562 flatcamTools/ToolSolderPaste.py:185
msgid "The height (Z) when solder paste dispensing stops."
msgstr "The height (Z) when solder paste dispensing stops."

#: flatcamGUI/FlatCAMGUI.py:6569 flatcamTools/ToolSolderPaste.py:191
msgid "Z Travel:"
msgstr "Z Travel:"

#: flatcamGUI/FlatCAMGUI.py:6571 flatcamTools/ToolSolderPaste.py:193
msgid ""
"The height (Z) for travel between pads\n"
"(without dispensing solder paste)."
msgstr ""
"The height (Z) for travel between pads\n"
"(without dispensing solder paste)."

#: flatcamGUI/FlatCAMGUI.py:6579 flatcamTools/ToolSolderPaste.py:200
msgid "Z Toolchange:"
msgstr "Z Toolchange:"

#: flatcamGUI/FlatCAMGUI.py:6581 flatcamTools/ToolSolderPaste.py:202
msgid "The height (Z) for tool (nozzle) change."
msgstr "The height (Z) for tool (nozzle) change."

#: flatcamGUI/FlatCAMGUI.py:6588 flatcamTools/ToolSolderPaste.py:208
msgid "XY Toolchange:"
msgstr "XY Toolchange:"

#: flatcamGUI/FlatCAMGUI.py:6590 flatcamTools/ToolSolderPaste.py:210
msgid ""
"The X,Y location for tool (nozzle) change.\n"
"The format is (x, y) where x and y are real numbers."
msgstr ""
"The X,Y location for tool (nozzle) change.\n"
"The format is (x, y) where x and y are real numbers."

#: flatcamGUI/FlatCAMGUI.py:6598 flatcamTools/ToolSolderPaste.py:217
msgid "Feedrate X-Y:"
msgstr "Feedrate X-Y:"

#: flatcamGUI/FlatCAMGUI.py:6600 flatcamTools/ToolSolderPaste.py:219
msgid "Feedrate (speed) while moving on the X-Y plane."
msgstr "Feedrate (speed) while moving on the X-Y plane."

#: flatcamGUI/FlatCAMGUI.py:6607 flatcamTools/ToolSolderPaste.py:225
msgid "Feedrate Z:"
msgstr "Feedrate Z:"

#: flatcamGUI/FlatCAMGUI.py:6609 flatcamTools/ToolSolderPaste.py:227
msgid ""
"Feedrate (speed) while moving vertically\n"
"(on Z plane)."
msgstr ""
"Feedrate (speed) while moving vertically\n"
"(on Z plane)."

#: flatcamGUI/FlatCAMGUI.py:6617 flatcamTools/ToolSolderPaste.py:234
msgid "Feedrate Z Dispense:"
msgstr "Feedrate Z Dispense:"

#: flatcamGUI/FlatCAMGUI.py:6619
#| msgid ""
#| "Feedrate (speed) while moving up vertically\n"
#| " to Dispense position (on Z plane)."
msgid ""
"Feedrate (speed) while moving up vertically\n"
"to Dispense position (on Z plane)."
msgstr ""
"Feedrate (speed) while moving up vertically\n"
"to Dispense position (on Z plane)."

#: flatcamGUI/FlatCAMGUI.py:6627 flatcamTools/ToolSolderPaste.py:243
msgid "Spindle Speed FWD:"
msgstr "Spindle Speed FWD:"

#: flatcamGUI/FlatCAMGUI.py:6629 flatcamTools/ToolSolderPaste.py:245
msgid ""
"The dispenser speed while pushing solder paste\n"
"through the dispenser nozzle."
msgstr ""
"The dispenser speed while pushing solder paste\n"
"through the dispenser nozzle."

#: flatcamGUI/FlatCAMGUI.py:6637 flatcamTools/ToolSolderPaste.py:252
msgid "Dwell FWD:"
msgstr "Dwell FWD:"

#: flatcamGUI/FlatCAMGUI.py:6639 flatcamTools/ToolSolderPaste.py:254
msgid "Pause after solder dispensing."
msgstr "Pause after solder dispensing."

#: flatcamGUI/FlatCAMGUI.py:6646 flatcamTools/ToolSolderPaste.py:260
msgid "Spindle Speed REV:"
msgstr "Spindle Speed REV:"

#: flatcamGUI/FlatCAMGUI.py:6648 flatcamTools/ToolSolderPaste.py:262
msgid ""
"The dispenser speed while retracting solder paste\n"
"through the dispenser nozzle."
msgstr ""
"The dispenser speed while retracting solder paste\n"
"through the dispenser nozzle."

#: flatcamGUI/FlatCAMGUI.py:6656 flatcamTools/ToolSolderPaste.py:269
msgid "Dwell REV:"
msgstr "Dwell REV:"

#: flatcamGUI/FlatCAMGUI.py:6658 flatcamTools/ToolSolderPaste.py:271
msgid ""
"Pause after solder paste dispenser retracted,\n"
"to allow pressure equilibrium."
msgstr ""
"Pause after solder paste dispenser retracted,\n"
"to allow pressure equilibrium."

#: flatcamGUI/FlatCAMGUI.py:6665 flatcamTools/ToolSolderPaste.py:277
msgid "PostProcessors:"
msgstr "PostProcessors:"

#: flatcamGUI/FlatCAMGUI.py:6667 flatcamTools/ToolSolderPaste.py:279
msgid "Files that control the GCode generation."
msgstr "Files that control the GCode generation."

#: flatcamGUI/FlatCAMGUI.py:6697 flatcamGUI/FlatCAMGUI.py:6703
msgid "Idle."
msgstr "Idle."

#: flatcamGUI/FlatCAMGUI.py:6727
msgid "Application started ..."
msgstr "Application started ..."

#: flatcamGUI/FlatCAMGUI.py:6728
msgid "Hello!"
msgstr "Hello!"

#: flatcamGUI/ObjectUI.py:33
msgid "FlatCAM Object"
msgstr "FlatCAM Object"

#: flatcamGUI/ObjectUI.py:58
msgid ""
"BASIC is suitable for a beginner. Many parameters\n"
"are hidden from the user in this mode.\n"
"ADVANCED mode will make available all parameters.\n"
"\n"
"To change the application LEVEL, go to:\n"
"Edit -> Preferences -> General and check:\n"
"'APP. LEVEL' radio button."
msgstr ""
"BASIC is suitable for a beginner. Many parameters\n"
"are hidden from the user in this mode.\n"
"ADVANCED mode will make available all parameters.\n"
"\n"
"To change the application LEVEL, go to:\n"
"Edit -> Preferences -> General and check:\n"
"'APP. LEVEL' radio button."

#: flatcamGUI/ObjectUI.py:79
msgid "<b>Scale:</b>"
msgstr "<b>Scale:</b>"

#: flatcamGUI/ObjectUI.py:81
msgid "Change the size of the object."
msgstr "Change the size of the object."

#: flatcamGUI/ObjectUI.py:89
msgid "Factor:"
msgstr "Factor:"

#: flatcamGUI/ObjectUI.py:91
msgid ""
"Factor by which to multiply\n"
"geometric features of this object."
msgstr ""
"Factor by which to multiply\n"
"geometric features of this object."

#: flatcamGUI/ObjectUI.py:102
msgid "Perform scaling operation."
msgstr "Perform scaling operation."

#: flatcamGUI/ObjectUI.py:108
msgid "<b>Offset:</b>"
msgstr "<b>Offset:</b>"

#: flatcamGUI/ObjectUI.py:110
msgid "Change the position of this object."
msgstr "Change the position of this object."

#: flatcamGUI/ObjectUI.py:117
msgid "Vector:"
msgstr "Vector:"

#: flatcamGUI/ObjectUI.py:119
msgid ""
"Amount by which to move the object\n"
"in the x and y axes in (x, y) format."
msgstr ""
"Amount by which to move the object\n"
"in the x and y axes in (x, y) format."

#: flatcamGUI/ObjectUI.py:129
msgid "Perform the offset operation."
msgstr "Perform the offset operation."

#: flatcamGUI/ObjectUI.py:143
msgid "Gerber Object"
msgstr "Gerber Object"

#: flatcamGUI/ObjectUI.py:182 flatcamGUI/ObjectUI.py:517
#: flatcamGUI/ObjectUI.py:839 flatcamGUI/ObjectUI.py:1382
msgid "<b>Name:</b>"
msgstr "<b>Name:</b>"

#: flatcamGUI/ObjectUI.py:203
msgid ""
"Toggle the display of the Gerber Apertures Table.\n"
"When unchecked, it will delete all mark shapes\n"
"that are drawn on canvas."
msgstr ""
"Toggle the display of the Gerber Apertures Table.\n"
"When unchecked, it will delete all mark shapes\n"
"that are drawn on canvas."

#: flatcamGUI/ObjectUI.py:214
msgid "Mark All"
msgstr "Mark All"

#: flatcamGUI/ObjectUI.py:216
msgid ""
"When checked it will display all the apertures.\n"
"When unchecked, it will delete all mark shapes\n"
"that are drawn on canvas."
msgstr ""
"When checked it will display all the apertures.\n"
"When unchecked, it will delete all mark shapes\n"
"that are drawn on canvas."

#: flatcamGUI/ObjectUI.py:244
msgid "Mark the aperture instances on canvas."
msgstr "Mark the aperture instances on canvas."

#: flatcamGUI/ObjectUI.py:262
msgid ""
"Diameter of the cutting tool.\n"
"If you want to have an isolation path\n"
"inside the actual shape of the Gerber\n"
"feature, use a negative value for\n"
"this parameter."
msgstr ""
"Diameter of the cutting tool.\n"
"If you want to have an isolation path\n"
"inside the actual shape of the Gerber\n"
"feature, use a negative value for\n"
"this parameter."

#: flatcamGUI/ObjectUI.py:273
msgid "Passes:"
msgstr "Passes:"

#: flatcamGUI/ObjectUI.py:307
msgid "Combine"
msgstr "Combine"

#: flatcamGUI/ObjectUI.py:323
msgid "<b>Generate Isolation Geometry:</b>"
msgstr "<b>Generate Isolation Geometry:</b>"

#: flatcamGUI/ObjectUI.py:325
msgid ""
"Create a Geometry object with toolpaths to cut \n"
"isolation outside, inside or on both sides of the\n"
"object. For a Gerber object outside means outside\n"
"of the Gerber feature and inside means inside of\n"
"the Gerber feature, if possible at all. This means\n"
"that only if the Gerber feature has openings inside, they\n"
"will be isolated. If what is wanted is to cut isolation\n"
"inside the actual Gerber feature, use a negative tool\n"
"diameter above."
msgstr ""
"Create a Geometry object with toolpaths to cut \n"
"isolation outside, inside or on both sides of the\n"
"object. For a Gerber object outside means outside\n"
"of the Gerber feature and inside means inside of\n"
"the Gerber feature, if possible at all. This means\n"
"that only if the Gerber feature has openings inside, they\n"
"will be isolated. If what is wanted is to cut isolation\n"
"inside the actual Gerber feature, use a negative tool\n"
"diameter above."

#: flatcamGUI/ObjectUI.py:344
msgid "FULL Geo"
msgstr "FULL Geo"

#: flatcamGUI/ObjectUI.py:346
msgid ""
"Create the Geometry Object\n"
"for isolation routing. It contains both\n"
"the interiors and exteriors geometry."
msgstr ""
"Create the Geometry Object\n"
"for isolation routing. It contains both\n"
"the interiors and exteriors geometry."

#: flatcamGUI/ObjectUI.py:355
msgid "Ext Geo"
msgstr "Ext Geo"

#: flatcamGUI/ObjectUI.py:357
msgid ""
"Create the Geometry Object\n"
"for isolation routing containing\n"
"only the exteriors geometry."
msgstr ""
"Create the Geometry Object\n"
"for isolation routing containing\n"
"only the exteriors geometry."

#: flatcamGUI/ObjectUI.py:364
msgid "Int Geo"
msgstr "Int Geo"

#: flatcamGUI/ObjectUI.py:366
msgid ""
"Create the Geometry Object\n"
"for isolation routing containing\n"
"only the interiors geometry."
msgstr ""
"Create the Geometry Object\n"
"for isolation routing containing\n"
"only the interiors geometry."

#: flatcamGUI/ObjectUI.py:384
msgid "<b>Clear N-copper:</b>"
msgstr "<b>Clear N-copper:</b>"

#: flatcamGUI/ObjectUI.py:394 flatcamTools/ToolNonCopperClear.py:240
msgid ""
"Create the Geometry Object\n"
"for non-copper routing."
msgstr ""
"Create the Geometry Object\n"
"for non-copper routing."

#: flatcamGUI/ObjectUI.py:400
msgid "<b>Board cutout:</b>"
msgstr "<b>Board cutout:</b>"

#: flatcamGUI/ObjectUI.py:408
msgid "Cutout Tool"
msgstr "Cutout Tool"

#: flatcamGUI/ObjectUI.py:410
msgid ""
"Generate the geometry for\n"
"the board cutout."
msgstr ""
"Generate the geometry for\n"
"the board cutout."

#: flatcamGUI/ObjectUI.py:416
msgid "<b>Non-copper regions:</b>"
msgstr "<b>Non-copper regions:</b>"

#: flatcamGUI/ObjectUI.py:418
msgid ""
"Create polygons covering the\n"
"areas without copper on the PCB.\n"
"Equivalent to the inverse of this\n"
"object. Can be used to remove all\n"
"copper from a specified region."
msgstr ""
"Create polygons covering the\n"
"areas without copper on the PCB.\n"
"Equivalent to the inverse of this\n"
"object. Can be used to remove all\n"
"copper from a specified region."

#: flatcamGUI/ObjectUI.py:443 flatcamGUI/ObjectUI.py:474
msgid "Rounded Geo"
msgstr "Rounded Geo"

#: flatcamGUI/ObjectUI.py:445
msgid "Resulting geometry will have rounded corners."
msgstr "Resulting geometry will have rounded corners."

#: flatcamGUI/ObjectUI.py:450 flatcamGUI/ObjectUI.py:484
#: flatcamTools/ToolCutOut.py:168 flatcamTools/ToolCutOut.py:188
#: flatcamTools/ToolCutOut.py:239 flatcamTools/ToolSolderPaste.py:127
msgid "Generate Geo"
msgstr "Generate Geo"

#: flatcamGUI/ObjectUI.py:456
msgid ""
"Create a geometry surrounding the Gerber object.\n"
"Square shape."
msgstr ""
"Create a geometry surrounding the Gerber object.\n"
"Square shape."

#: flatcamGUI/ObjectUI.py:486
msgid "Generate the Geometry object."
msgstr "Generate the Geometry object."

#: flatcamGUI/ObjectUI.py:497
msgid "Excellon Object"
msgstr "Excellon Object"

#: flatcamGUI/ObjectUI.py:508
msgid "Solid circles."
msgstr "Solid circles."

#: flatcamGUI/ObjectUI.py:536 flatcamGUI/ObjectUI.py:858
msgid "<b>Tools Table</b>"
msgstr "<b>Tools Table</b>"

#: flatcamGUI/ObjectUI.py:556
msgid "Drills"
msgstr "Drills"

#: flatcamGUI/ObjectUI.py:556
msgid "Slots"
msgstr "Slots"

#: flatcamGUI/ObjectUI.py:557
msgid "Offset Z"
msgstr "Offset Z"

#: flatcamGUI/ObjectUI.py:561
msgid ""
"This is the Tool Number.\n"
"When ToolChange is checked, on toolchange event this value\n"
"will be showed as a T1, T2 ... Tn in the Machine Code."
msgstr ""
"This is the Tool Number.\n"
"When ToolChange is checked, on toolchange event this value\n"
"will be showed as a T1, T2 ... Tn in the Machine Code."

#: flatcamGUI/ObjectUI.py:565 flatcamGUI/ObjectUI.py:904
#: flatcamTools/ToolNonCopperClear.py:97 flatcamTools/ToolPaint.py:94
msgid ""
"Tool Diameter. It's value (in current FlatCAM units) \n"
"is the cut width into the material."
msgstr ""
"Tool Diameter. It's value (in current FlatCAM units) \n"
"is the cut width into the material."

#: flatcamGUI/ObjectUI.py:568
msgid ""
"The number of Drill holes. Holes that are drilled with\n"
"a drill bit."
msgstr ""
"The number of Drill holes. Holes that are drilled with\n"
"a drill bit."

#: flatcamGUI/ObjectUI.py:571
msgid ""
"The number of Slot holes. Holes that are created by\n"
"milling them with an endmill bit."
msgstr ""
"The number of Slot holes. Holes that are created by\n"
"milling them with an endmill bit."

#: flatcamGUI/ObjectUI.py:578
msgid "Toggle display of the drills for the current tool."
msgstr "Toggle display of the drills for the current tool."

#: flatcamGUI/ObjectUI.py:586
msgid ""
"Create a CNC Job object\n"
"for this drill object."
msgstr ""
"Create a CNC Job object\n"
"for this drill object."

#: flatcamGUI/ObjectUI.py:615 flatcamGUI/ObjectUI.py:1118
msgid "Tool change"
msgstr "Tool change"

#: flatcamGUI/ObjectUI.py:623 flatcamGUI/ObjectUI.py:1111
msgid "Tool change Z:"
msgstr "Tool change Z:"

#: flatcamGUI/ObjectUI.py:625 flatcamGUI/ObjectUI.py:1114
msgid ""
"Z-axis position (height) for\n"
"tool change."
msgstr ""
"Z-axis position (height) for\n"
"tool change."

#: flatcamGUI/ObjectUI.py:636
msgid ""
"Tool height just before starting the work.\n"
"Delete the value if you don't need this feature."
msgstr ""
"Tool height just before starting the work.\n"
"Delete the value if you don't need this feature."

#: flatcamGUI/ObjectUI.py:646
msgid ""
"Z-axis position (height) for\n"
"the last move."
msgstr ""
"Z-axis position (height) for\n"
"the last move."

#: flatcamGUI/ObjectUI.py:654
msgid "Feedrate (Plunge):"
msgstr "Feedrate (Plunge):"

#: flatcamGUI/ObjectUI.py:656
msgid ""
"Tool speed while drilling\n"
"(in units per minute).\n"
"This is for linear move G01."
msgstr ""
"Tool speed while drilling\n"
"(in units per minute).\n"
"This is for linear move G01."

#: flatcamGUI/ObjectUI.py:709
msgid ""
"The json file that dictates\n"
"gcode output."
msgstr ""
"The json file that dictates\n"
"gcode output."

#: flatcamGUI/ObjectUI.py:741
msgid ""
"Select from the Tools Table above\n"
"the tools you want to include."
msgstr ""
"Select from the Tools Table above\n"
"the tools you want to include."

#: flatcamGUI/ObjectUI.py:748
msgid "<b>Type:    </b>"
msgstr "<b>Type:    </b>"

#: flatcamGUI/ObjectUI.py:750
msgid ""
"Choose what to use for GCode generation:\n"
"'Drills', 'Slots' or 'Both'.\n"
"When choosing 'Slots' or 'Both', slots will be\n"
"converted to a series of drills."
msgstr ""
"Choose what to use for GCode generation:\n"
"'Drills', 'Slots' or 'Both'.\n"
"When choosing 'Slots' or 'Both', slots will be\n"
"converted to a series of drills."

#: flatcamGUI/ObjectUI.py:765
msgid "Create GCode"
msgstr "Create GCode"

#: flatcamGUI/ObjectUI.py:767
msgid "Generate the CNC Job."
msgstr "Generate the CNC Job."

#: flatcamGUI/ObjectUI.py:779
msgid ""
"Select from the Tools Table above\n"
" the hole dias that are to be milled."
msgstr ""
"Select from the Tools Table above\n"
" the hole dias that are to be milled."

#: flatcamGUI/ObjectUI.py:786
msgid "Drills Tool dia:"
msgstr "Drills Tool dia:"

#: flatcamGUI/ObjectUI.py:793
msgid "Mill Drills Geo"
msgstr "Mill Drills Geo"

#: flatcamGUI/ObjectUI.py:795
msgid ""
"Create the Geometry Object\n"
"for milling DRILLS toolpaths."
msgstr ""
"Create the Geometry Object\n"
"for milling DRILLS toolpaths."

#: flatcamGUI/ObjectUI.py:802
msgid "Slots Tool dia:"
msgstr "Slots Tool dia:"

#: flatcamGUI/ObjectUI.py:809
msgid "Mill Slots Geo"
msgstr "Mill Slots Geo"

#: flatcamGUI/ObjectUI.py:811
msgid ""
"Create the Geometry Object\n"
"for milling SLOTS toolpaths."
msgstr ""
"Create the Geometry Object\n"
"for milling SLOTS toolpaths."

#: flatcamGUI/ObjectUI.py:829
msgid "Geometry Object"
msgstr "Geometry Object"

#: flatcamGUI/ObjectUI.py:860
msgid ""
"Tools in this Geometry object used for cutting.\n"
"The 'Offset' entry will set an offset for the cut.\n"
"'Offset' can be inside, outside, on path (none) and custom.\n"
"'Type' entry is only informative and it allow to know the \n"
"intent of using the current tool. \n"
"It can be Rough(ing), Finish(ing) or Iso(lation).\n"
"The 'Tool type'(TT) can be circular with 1 to 4 teeths(C1..C4),\n"
"ball(B), or V-Shaped(V). \n"
"When V-shaped is selected the 'Type' entry is automatically \n"
"set to Isolation, the CutZ parameter in the UI form is\n"
"grayed out and Cut Z is automatically calculated from the newly \n"
"showed UI form entries named V-Tip Dia and V-Tip Angle."
msgstr ""
"Tools in this Geometry object used for cutting.\n"
"The 'Offset' entry will set an offset for the cut.\n"
"'Offset' can be inside, outside, on path (none) and custom.\n"
"'Type' entry is only informative and it allow to know the \n"
"intent of using the current tool. \n"
"It can be Rough(ing), Finish(ing) or Iso(lation).\n"
"The 'Tool type'(TT) can be circular with 1 to 4 teeths(C1..C4),\n"
"ball(B), or V-Shaped(V). \n"
"When V-shaped is selected the 'Type' entry is automatically \n"
"set to Isolation, the CutZ parameter in the UI form is\n"
"grayed out and Cut Z is automatically calculated from the newly \n"
"showed UI form entries named V-Tip Dia and V-Tip Angle."

#: flatcamGUI/ObjectUI.py:891 flatcamGUI/ObjectUI.py:1465
msgid "Dia"
msgstr "Dia"

#: flatcamGUI/ObjectUI.py:891 flatcamGUI/ObjectUI.py:1465
msgid "TT"
msgstr "TT"

#: flatcamGUI/ObjectUI.py:898
msgid ""
"This is the Tool Number.\n"
"When ToolChange is checked, on toolchange event this value\n"
"will be showed as a T1, T2 ... Tn"
msgstr ""
"This is the Tool Number.\n"
"When ToolChange is checked, on toolchange event this value\n"
"will be showed as a T1, T2 ... Tn"

#: flatcamGUI/ObjectUI.py:909
msgid ""
"The value for the Offset can be:\n"
"- Path -> There is no offset, the tool cut will be done through the geometry "
"line.\n"
"- In(side) -> The tool cut will follow the geometry inside. It will create a "
"'pocket'.\n"
"- Out(side) -> The tool cut will follow the geometry line on the outside."
msgstr ""
"The value for the Offset can be:\n"
"- Path -> There is no offset, the tool cut will be done through the geometry "
"line.\n"
"- In(side) -> The tool cut will follow the geometry inside. It will create a "
"'pocket'.\n"
"- Out(side) -> The tool cut will follow the geometry line on the outside."

#: flatcamGUI/ObjectUI.py:916
msgid ""
"The (Operation) Type has only informative value. Usually the UI form "
"values \n"
"are choosed based on the operation type and this will serve as a reminder.\n"
"Can be 'Roughing', 'Finishing' or 'Isolation'.\n"
"For Roughing we may choose a lower Feedrate and multiDepth cut.\n"
"For Finishing we may choose a higher Feedrate, without multiDepth.\n"
"For Isolation we need a lower Feedrate as it use a milling bit with a fine "
"tip."
msgstr ""
"The (Operation) Type has only informative value. Usually the UI form "
"values \n"
"are choosed based on the operation type and this will serve as a reminder.\n"
"Can be 'Roughing', 'Finishing' or 'Isolation'.\n"
"For Roughing we may choose a lower Feedrate and multiDepth cut.\n"
"For Finishing we may choose a higher Feedrate, without multiDepth.\n"
"For Isolation we need a lower Feedrate as it use a milling bit with a fine "
"tip."

#: flatcamGUI/ObjectUI.py:925
msgid ""
"The Tool Type (TT) can be:\n"
"- Circular with 1 ... 4 teeth -> it is informative only. Being circular the "
"cut width in material\n"
"is exactly the tool diameter.\n"
"- Ball -> informative only and make reference to the Ball type endmill.\n"
"- V-Shape -> it will disable de Z-Cut parameter in the UI form and enable "
"two additional UI form\n"
"fields: V-Tip Dia and V-Tip Angle. Adjusting those two values will adjust "
"the Z-Cut parameter such\n"
"as the cut width into material will be equal with the value in the Tool "
"Diameter column of this table.\n"
"Choosing the V-Shape Tool Type automatically will select the Operation Type "
"as Isolation."
msgstr ""
"The Tool Type (TT) can be:\n"
"- Circular with 1 ... 4 teeth -> it is informative only. Being circular the "
"cut width in material\n"
"is exactly the tool diameter.\n"
"- Ball -> informative only and make reference to the Ball type endmill.\n"
"- V-Shape -> it will disable de Z-Cut parameter in the UI form and enable "
"two additional UI form\n"
"fields: V-Tip Dia and V-Tip Angle. Adjusting those two values will adjust "
"the Z-Cut parameter such\n"
"as the cut width into material will be equal with the value in the Tool "
"Diameter column of this table.\n"
"Choosing the V-Shape Tool Type automatically will select the Operation Type "
"as Isolation."

#: flatcamGUI/ObjectUI.py:936
msgid ""
"Plot column. It is visible only for MultiGeo geometries, meaning geometries "
"that holds the geometry\n"
"data into the tools. For those geometries, deleting the tool will delete the "
"geometry data also,\n"
"so be WARNED. From the checkboxes on each row it can be enabled/disabled the "
"plot on canvas\n"
"for the corresponding tool."
msgstr ""
"Plot column. It is visible only for MultiGeo geometries, meaning geometries "
"that holds the geometry\n"
"data into the tools. For those geometries, deleting the tool will delete the "
"geometry data also,\n"
"so be WARNED. From the checkboxes on each row it can be enabled/disabled the "
"plot on canvas\n"
"for the corresponding tool."

#: flatcamGUI/ObjectUI.py:949
msgid "Tool Offset:"
msgstr "Tool Offset:"

#: flatcamGUI/ObjectUI.py:952
msgid ""
"The value to offset the cut when \n"
"the Offset type selected is 'Offset'.\n"
"The value can be positive for 'outside'\n"
"cut and negative for 'inside' cut."
msgstr ""
"The value to offset the cut when \n"
"the Offset type selected is 'Offset'.\n"
"The value can be positive for 'outside'\n"
"cut and negative for 'inside' cut."

#: flatcamGUI/ObjectUI.py:975
msgid "<b>Tool Dia:</b>"
msgstr "<b>Tool Dia:</b>"

#: flatcamGUI/ObjectUI.py:994 flatcamTools/ToolNonCopperClear.py:136
#: flatcamTools/ToolPaint.py:133
msgid ""
"Add a new tool to the Tool Table\n"
"with the diameter specified above."
msgstr ""
"Add a new tool to the Tool Table\n"
"with the diameter specified above."

#: flatcamGUI/ObjectUI.py:1002
msgid ""
"Copy a selection of tools in the Tool Table\n"
"by first selecting a row in the Tool Table."
msgstr ""
"Copy a selection of tools in the Tool Table\n"
"by first selecting a row in the Tool Table."

#: flatcamGUI/ObjectUI.py:1010
msgid ""
"Delete a selection of tools in the Tool Table\n"
"by first selecting a row in the Tool Table."
msgstr ""
"Delete a selection of tools in the Tool Table\n"
"by first selecting a row in the Tool Table."

#: flatcamGUI/ObjectUI.py:1026
msgid "<b>Tool Data</b>"
msgstr "<b>Tool Data</b>"

#: flatcamGUI/ObjectUI.py:1029
msgid ""
"The data used for creating GCode.\n"
"Each tool store it's own set of such data."
msgstr ""
"The data used for creating GCode.\n"
"Each tool store it's own set of such data."

#: flatcamGUI/ObjectUI.py:1039
msgid "V-Tip Dia:"
msgstr "V-Tip Dia:"

#: flatcamGUI/ObjectUI.py:1042
msgid "The tip diameter for V-Shape Tool"
msgstr "The tip diameter for V-Shape Tool"

#: flatcamGUI/ObjectUI.py:1050
msgid "V-Tip Angle:"
msgstr "V-Tip Angle:"

#: flatcamGUI/ObjectUI.py:1053
msgid ""
"The tip angle for V-Shape Tool.\n"
"In degree."
msgstr ""
"The tip angle for V-Shape Tool.\n"
"In degree."

#: flatcamGUI/ObjectUI.py:1074
msgid "Multi-Depth:"
msgstr "Multi-Depth:"

#: flatcamGUI/ObjectUI.py:1077
msgid ""
"Use multiple passes to limit\n"
"the cut depth in each pass. Will\n"
"cut multiple times until Cut Z is\n"
"reached.\n"
"To the right, input the depth of \n"
"each pass (positive value)."
msgstr ""
"Use multiple passes to limit\n"
"the cut depth in each pass. Will\n"
"cut multiple times until Cut Z is\n"
"reached.\n"
"To the right, input the depth of \n"
"each pass (positive value)."

#: flatcamGUI/ObjectUI.py:1090
msgid "Depth of each pass (positive)."
msgstr "Depth of each pass (positive)."

#: flatcamGUI/ObjectUI.py:1121
msgid ""
"Include tool-change sequence\n"
"in the Machine Code (Pause for tool change)."
msgstr ""
"Include tool-change sequence\n"
"in the Machine Code (Pause for tool change)."

#: flatcamGUI/ObjectUI.py:1147
msgid ""
"This is the height (Z) at which the CNC\n"
"will go as the last move."
msgstr ""
"This is the height (Z) at which the CNC\n"
"will go as the last move."

#: flatcamGUI/ObjectUI.py:1168
msgid "Feed Rate Z (Plunge):"
msgstr "Feed Rate Z (Plunge):"

#: flatcamGUI/ObjectUI.py:1171
msgid ""
"Cutting speed in the Z\n"
"plane in units per minute"
msgstr ""
"Cutting speed in the Z\n"
"plane in units per minute"

#: flatcamGUI/ObjectUI.py:1180
msgid "Feed Rate Rapids:"
msgstr "Feed Rate Rapids:"

#: flatcamGUI/ObjectUI.py:1183
msgid ""
"Cutting speed in the XY\n"
"plane in units per minute\n"
"(in units per minute).\n"
"This is for the rapid move G00.\n"
"It is useful only for Marlin,\n"
"ignore for any other cases."
msgstr ""
"Cutting speed in the XY\n"
"plane in units per minute\n"
"(in units per minute).\n"
"This is for the rapid move G00.\n"
"It is useful only for Marlin,\n"
"ignore for any other cases."

#: flatcamGUI/ObjectUI.py:1199
msgid "Cut over 1st pt"
msgstr "Cut over 1st pt"

#: flatcamGUI/ObjectUI.py:1214
msgid ""
"Speed of the spindle in RPM (optional).\n"
"If LASER postprocessor is used,\n"
"this value is the power of laser."
msgstr ""
"Speed of the spindle in RPM (optional).\n"
"If LASER postprocessor is used,\n"
"this value is the power of laser."

#: flatcamGUI/ObjectUI.py:1243
msgid "PostProcessor:"
msgstr "PostProcessor:"

#: flatcamGUI/ObjectUI.py:1246
msgid ""
"The Postprocessor file that dictates\n"
"the Machine Code (like GCode, RML, HPGL) output."
msgstr ""
"The Postprocessor file that dictates\n"
"the Machine Code (like GCode, RML, HPGL) output."

#: flatcamGUI/ObjectUI.py:1284
msgid ""
"Add at least one tool in the tool-table.\n"
"Click the header to select all, or Ctrl + LMB\n"
"for custom selection of tools."
msgstr ""
"Add at least one tool in the tool-table.\n"
"Click the header to select all, or Ctrl + LMB\n"
"for custom selection of tools."

#: flatcamGUI/ObjectUI.py:1291
msgid "Generate"
msgstr "Generate"

#: flatcamGUI/ObjectUI.py:1294
msgid "Generate the CNC Job object."
msgstr "Generate the CNC Job object."

#: flatcamGUI/ObjectUI.py:1302
msgid "<b>Paint Area:</b>"
msgstr "<b>Paint Area:</b>"

#: flatcamGUI/ObjectUI.py:1317
msgid "Launch Paint Tool in Tools Tab."
msgstr "Launch Paint Tool in Tools Tab."

#: flatcamGUI/ObjectUI.py:1334
msgid "CNC Job Object"
msgstr "CNC Job Object"

#: flatcamGUI/ObjectUI.py:1353
msgid "<b>Plot kind:</b>"
msgstr "<b>Plot kind:</b>"

#: flatcamGUI/ObjectUI.py:1369
#| msgid "<b>Plot Options:</b>"
msgid "<b>Display Annotation:</b>"
msgstr "<b>Display Annotation:</b>"

#: flatcamGUI/ObjectUI.py:1388
msgid "<b>Travelled dist.:</b>"
msgstr "<b>Travelled dist.:</b>"

#: flatcamGUI/ObjectUI.py:1391 flatcamGUI/ObjectUI.py:1398
msgid ""
"This is the total travelled distance on X-Y plane.\n"
"In current units."
msgstr ""
"This is the total travelled distance on X-Y plane.\n"
"In current units."

#: flatcamGUI/ObjectUI.py:1429
msgid "<b>CNC Tools Table</b>"
msgstr "<b>CNC Tools Table</b>"

#: flatcamGUI/ObjectUI.py:1432
msgid ""
"Tools in this CNCJob object used for cutting.\n"
"The tool diameter is used for plotting on canvas.\n"
"The 'Offset' entry will set an offset for the cut.\n"
"'Offset' can be inside, outside, on path (none) and custom.\n"
"'Type' entry is only informative and it allow to know the \n"
"intent of using the current tool. \n"
"It can be Rough(ing), Finish(ing) or Iso(lation).\n"
"The 'Tool type'(TT) can be circular with 1 to 4 teeths(C1..C4),\n"
"ball(B), or V-Shaped(V)."
msgstr ""
"Tools in this CNCJob object used for cutting.\n"
"The tool diameter is used for plotting on canvas.\n"
"The 'Offset' entry will set an offset for the cut.\n"
"'Offset' can be inside, outside, on path (none) and custom.\n"
"'Type' entry is only informative and it allow to know the \n"
"intent of using the current tool. \n"
"It can be Rough(ing), Finish(ing) or Iso(lation).\n"
"The 'Tool type'(TT) can be circular with 1 to 4 teeths(C1..C4),\n"
"ball(B), or V-Shaped(V)."

#: flatcamGUI/ObjectUI.py:1466
msgid "P"
msgstr "P"

#: flatcamGUI/ObjectUI.py:1472
msgid "Update Plot"
msgstr "Update Plot"

#: flatcamGUI/ObjectUI.py:1474
msgid "Update the plot."
msgstr "Update the plot."

#: flatcamGUI/ObjectUI.py:1481
msgid "<b>Export CNC Code:</b>"
msgstr "<b>Export CNC Code:</b>"

#: flatcamGUI/ObjectUI.py:1489
msgid "Prepend to CNC Code:"
msgstr "Prepend to CNC Code:"

#: flatcamGUI/ObjectUI.py:1492
msgid ""
"Type here any G-Code commands you would\n"
"like to add to the beginning of the generated file."
msgstr ""
"Type here any G-Code commands you would\n"
"like to add to the beginning of the generated file."

#: flatcamGUI/ObjectUI.py:1502
msgid "Append to CNC Code"
msgstr "Append to CNC Code"

#: flatcamGUI/ObjectUI.py:1526
msgid ""
"Type here any G-Code commands you would\n"
"like to be executed when Toolchange event is encountered.\n"
"This will constitute a Custom Toolchange GCode,\n"
"or a Toolchange Macro.\n"
"The FlatCAM variables are surrounded by '%' symbol.\n"
"\n"
"WARNING: it can be used only with a postprocessor file\n"
"that has 'toolchange_custom' in it's name and this is built\n"
"having as template the 'Toolchange Custom' posprocessor file."
msgstr ""
"Type here any G-Code commands you would\n"
"like to be executed when Toolchange event is encountered.\n"
"This will constitute a Custom Toolchange GCode,\n"
"or a Toolchange Macro.\n"
"The FlatCAM variables are surrounded by '%' symbol.\n"
"\n"
"WARNING: it can be used only with a postprocessor file\n"
"that has 'toolchange_custom' in it's name and this is built\n"
"having as template the 'Toolchange Custom' posprocessor file."

#: flatcamGUI/ObjectUI.py:1574
msgid "z_cut = depth where to cut"
msgstr "z_cut = depth where to cut"

#: flatcamGUI/ObjectUI.py:1575
msgid "z_move = height where to travel"
msgstr "z_move = height where to travel"

#: flatcamGUI/ObjectUI.py:1593
msgid "View CNC Code"
msgstr "View CNC Code"

#: flatcamGUI/ObjectUI.py:1596
msgid ""
"Opens TAB to view/modify/print G-Code\n"
"file."
msgstr ""
"Opens TAB to view/modify/print G-Code\n"
"file."

#: flatcamGUI/ObjectUI.py:1602
msgid "Save CNC Code"
msgstr "Save CNC Code"

#: flatcamGUI/ObjectUI.py:1605
msgid ""
"Opens dialog to save G-Code\n"
"file."
msgstr ""
"Opens dialog to save G-Code\n"
"file."

#: flatcamTools/ToolCalculators.py:24
msgid "Calculators"
msgstr "Calculators"

#: flatcamTools/ToolCalculators.py:25
msgid "V-Shape Tool Calculator"
msgstr "V-Shape Tool Calculator"

#: flatcamTools/ToolCalculators.py:26
msgid "Units Calculator"
msgstr "Units Calculator"

#: flatcamTools/ToolCalculators.py:27
msgid "ElectroPlating Calculator"
msgstr "ElectroPlating Calculator"

#: flatcamTools/ToolCalculators.py:68
msgid "Here you enter the value to be converted from INCH to MM"
msgstr "Here you enter the value to be converted from INCH to MM"

#: flatcamTools/ToolCalculators.py:73
msgid "Here you enter the value to be converted from MM to INCH"
msgstr "Here you enter the value to be converted from MM to INCH"

#: flatcamTools/ToolCalculators.py:98
msgid ""
"This is the diameter of the tool tip.\n"
"The manufacturer specifies it."
msgstr ""
"This is the diameter of the tool tip.\n"
"The manufacturer specifies it."

#: flatcamTools/ToolCalculators.py:101
msgid "Tip Angle:"
msgstr "Tip Angle:"

#: flatcamTools/ToolCalculators.py:105
msgid ""
"This is the angle of the tip of the tool.\n"
"It is specified by manufacturer."
msgstr ""
"This is the angle of the tip of the tool.\n"
"It is specified by manufacturer."

#: flatcamTools/ToolCalculators.py:112
msgid ""
"This is the depth to cut into the material.\n"
"In the CNCJob is the CutZ parameter."
msgstr ""
"This is the depth to cut into the material.\n"
"In the CNCJob is the CutZ parameter."

#: flatcamTools/ToolCalculators.py:115
msgid "Tool Diameter:"
msgstr "Tool Diameter:"

#: flatcamTools/ToolCalculators.py:119
msgid ""
"This is the tool diameter to be entered into\n"
"FlatCAM Gerber section.\n"
"In the CNCJob section it is called >Tool dia<."
msgstr ""
"This is the tool diameter to be entered into\n"
"FlatCAM Gerber section.\n"
"In the CNCJob section it is called >Tool dia<."

#: flatcamTools/ToolCalculators.py:131 flatcamTools/ToolCalculators.py:214
msgid "Calculate"
msgstr "Calculate"

#: flatcamTools/ToolCalculators.py:134
msgid ""
"Calculate either the Cut Z or the effective tool diameter,\n"
"  depending on which is desired and which is known. "
msgstr ""
"Calculate either the Cut Z or the effective tool diameter,\n"
"  depending on which is desired and which is known. "

#: flatcamTools/ToolCalculators.py:190
msgid "Current Value:"
msgstr "Current Value:"

#: flatcamTools/ToolCalculators.py:194
msgid ""
"This is the current intensity value\n"
"to be set on the Power Supply. In Amps."
msgstr ""
"This is the current intensity value\n"
"to be set on the Power Supply. In Amps."

#: flatcamTools/ToolCalculators.py:198
msgid "Time:"
msgstr "Time:"

#: flatcamTools/ToolCalculators.py:202
msgid ""
"This is the calculated time required for the procedure.\n"
"In minutes."
msgstr ""
"This is the calculated time required for the procedure.\n"
"In minutes."

#: flatcamTools/ToolCalculators.py:217
msgid ""
"Calculate the current intensity value and the procedure time,\n"
"  depending on the parameters above"
msgstr ""
"Calculate the current intensity value and the procedure time,\n"
"  depending on the parameters above"

#: flatcamTools/ToolCutOut.py:17
msgid "Cutout PCB"
msgstr "Cutout PCB"

#: flatcamTools/ToolCutOut.py:53
msgid "Obj Type:"
msgstr "Obj Type:"

#: flatcamTools/ToolCutOut.py:55
msgid ""
"Specify the type of object to be cutout.\n"
"It can be of type: Gerber or Geometry.\n"
"What is selected here will dictate the kind\n"
"of objects that will populate the 'Object' combobox."
msgstr ""
"Specify the type of object to be cutout.\n"
"It can be of type: Gerber or Geometry.\n"
"What is selected here will dictate the kind\n"
"of objects that will populate the 'Object' combobox."

#: flatcamTools/ToolCutOut.py:69 flatcamTools/ToolPanelize.py:71
msgid "Object:"
msgstr "Object:"

#: flatcamTools/ToolCutOut.py:71
msgid "Object to be cutout.                        "
msgstr "Object to be cutout.                        "

#: flatcamTools/ToolCutOut.py:79
msgid ""
"Diameter of the tool used to cutout\n"
"the PCB shape out of the surrounding material."
msgstr ""
"Diameter of the tool used to cutout\n"
"the PCB shape out of the surrounding material."

#: flatcamTools/ToolCutOut.py:88
msgid ""
"Margin over bounds. A positive value here\n"
"will make the cutout of the PCB further from\n"
"the actual PCB border"
msgstr ""
"Margin over bounds. A positive value here\n"
"will make the cutout of the PCB further from\n"
"the actual PCB border"

#: flatcamTools/ToolCutOut.py:98
msgid ""
"The size of the bridge gaps in the cutout\n"
"used to keep the board connected to\n"
"the surrounding material (the one \n"
"from which the PCB is cutout)."
msgstr ""
"The size of the bridge gaps in the cutout\n"
"used to keep the board connected to\n"
"the surrounding material (the one \n"
"from which the PCB is cutout)."

#: flatcamTools/ToolCutOut.py:117
msgid ""
"Create a convex shape surrounding the entire PCB.\n"
"Used only if the source object type is Gerber."
msgstr ""
"Create a convex shape surrounding the entire PCB.\n"
"Used only if the source object type is Gerber."

#: flatcamTools/ToolCutOut.py:123
msgid "A. Automatic Bridge Gaps"
msgstr "A. Automatic Bridge Gaps"

#: flatcamTools/ToolCutOut.py:125
msgid "This section handle creation of automatic bridge gaps."
msgstr "This section handle creation of automatic bridge gaps."

#: flatcamTools/ToolCutOut.py:136
msgid ""
"Number of gaps used for the Automatic cutout.\n"
"There can be maximum 8 bridges/gaps.\n"
"The choices are:\n"
"- lr    - left + right\n"
"- tb    - top + bottom\n"
"- 4     - left + right +top + bottom\n"
"- 2lr   - 2*left + 2*right\n"
"- 2tb  - 2*top + 2*bottom\n"
"- 8     - 2*left + 2*right +2*top + 2*bottom"
msgstr ""
"Number of gaps used for the Automatic cutout.\n"
"There can be maximum 8 bridges/gaps.\n"
"The choices are:\n"
"- lr    - left + right\n"
"- tb    - top + bottom\n"
"- 4     - left + right +top + bottom\n"
"- 2lr   - 2*left + 2*right\n"
"- 2tb  - 2*top + 2*bottom\n"
"- 8     - 2*left + 2*right +2*top + 2*bottom"

#: flatcamTools/ToolCutOut.py:159
msgid "FreeForm:"
msgstr "FreeForm:"

#: flatcamTools/ToolCutOut.py:161
msgid ""
"The cutout shape can be of ny shape.\n"
"Useful when the PCB has a non-rectangular shape."
msgstr ""
"The cutout shape can be of ny shape.\n"
"Useful when the PCB has a non-rectangular shape."

#: flatcamTools/ToolCutOut.py:170
msgid ""
"Cutout the selected object.\n"
"The cutout shape can be of any shape.\n"
"Useful when the PCB has a non-rectangular shape."
msgstr ""
"Cutout the selected object.\n"
"The cutout shape can be of any shape.\n"
"Useful when the PCB has a non-rectangular shape."

#: flatcamTools/ToolCutOut.py:179
msgid "Rectangular:"
msgstr "Rectangular:"

#: flatcamTools/ToolCutOut.py:181
msgid ""
"The resulting cutout shape is\n"
"always a rectangle shape and it will be\n"
"the bounding box of the Object."
msgstr ""
"The resulting cutout shape is\n"
"always a rectangle shape and it will be\n"
"the bounding box of the Object."

#: flatcamTools/ToolCutOut.py:190
msgid ""
"Cutout the selected object.\n"
"The resulting cutout shape is\n"
"always a rectangle shape and it will be\n"
"the bounding box of the Object."
msgstr ""
"Cutout the selected object.\n"
"The resulting cutout shape is\n"
"always a rectangle shape and it will be\n"
"the bounding box of the Object."

#: flatcamTools/ToolCutOut.py:198
msgid "B. Manual Bridge Gaps"
msgstr "B. Manual Bridge Gaps"

#: flatcamTools/ToolCutOut.py:200
msgid ""
"This section handle creation of manual bridge gaps.\n"
"This is done by mouse clicking on the perimeter of the\n"
"Geometry object that is used as a cutout object. "
msgstr ""
"This section handle creation of manual bridge gaps.\n"
"This is done by mouse clicking on the perimeter of the\n"
"Geometry object that is used as a cutout object. "

#: flatcamTools/ToolCutOut.py:216
msgid "Geo Obj:"
msgstr "Geo Obj:"

#: flatcamTools/ToolCutOut.py:218
msgid "Geometry object used to create the manual cutout."
msgstr "Geometry object used to create the manual cutout."

#: flatcamTools/ToolCutOut.py:229
msgid "Manual Geo:"
msgstr "Manual Geo:"

#: flatcamTools/ToolCutOut.py:231 flatcamTools/ToolCutOut.py:241
msgid ""
"If the object to be cutout is a Gerber\n"
"first create a Geometry that surrounds it,\n"
"to be used as the cutout, if one doesn't exist yet.\n"
"Select the source Gerber file in the top object combobox."
msgstr ""
"If the object to be cutout is a Gerber\n"
"first create a Geometry that surrounds it,\n"
"to be used as the cutout, if one doesn't exist yet.\n"
"Select the source Gerber file in the top object combobox."

#: flatcamTools/ToolCutOut.py:251
msgid "Manual Add Bridge Gaps:"
msgstr "Manual Add Bridge Gaps:"

#: flatcamTools/ToolCutOut.py:253
msgid ""
"Use the left mouse button (LMB) click\n"
"to create a bridge gap to separate the PCB from\n"
"the surrounding material."
msgstr ""
"Use the left mouse button (LMB) click\n"
"to create a bridge gap to separate the PCB from\n"
"the surrounding material."

#: flatcamTools/ToolCutOut.py:260
msgid "Generate Gap"
msgstr "Generate Gap"

#: flatcamTools/ToolCutOut.py:262
msgid ""
"Use the left mouse button (LMB) click\n"
"to create a bridge gap to separate the PCB from\n"
"the surrounding material.\n"
"The LMB click has to be done on the perimeter of\n"
"the Geometry object used as a cutout geometry."
msgstr ""
"Use the left mouse button (LMB) click\n"
"to create a bridge gap to separate the PCB from\n"
"the surrounding material.\n"
"The LMB click has to be done on the perimeter of\n"
"the Geometry object used as a cutout geometry."

#: flatcamTools/ToolCutOut.py:341 flatcamTools/ToolCutOut.py:499
#: flatcamTools/ToolNonCopperClear.py:666 flatcamTools/ToolPaint.py:764
#: flatcamTools/ToolPanelize.py:352 flatcamTools/ToolPanelize.py:366
#: flatcamTools/ToolSub.py:237 flatcamTools/ToolSub.py:249
#: flatcamTools/ToolSub.py:428 flatcamTools/ToolSub.py:440
#, python-format
msgid "[ERROR_NOTCL] Could not retrieve object: %s"
msgstr "[ERROR_NOTCL] Could not retrieve object: %s"

#: flatcamTools/ToolCutOut.py:345
msgid ""
"[ERROR_NOTCL] There is no object selected for Cutout.\n"
"Select one and try again."
msgstr ""
"[ERROR_NOTCL] There is no object selected for Cutout.\n"
"Select one and try again."

#: flatcamTools/ToolCutOut.py:360
msgid ""
"[WARNING_NOTCL] Tool Diameter is zero value. Change it to a positive real "
"number."
msgstr ""
"[WARNING_NOTCL] Tool Diameter is zero value. Change it to a positive real "
"number."

#: flatcamTools/ToolCutOut.py:370 flatcamTools/ToolCutOut.py:527
#: flatcamTools/ToolCutOut.py:771
msgid ""
"[WARNING_NOTCL] Margin value is missing or wrong format. Add it and retry."
msgstr ""
"[WARNING_NOTCL] Margin value is missing or wrong format. Add it and retry."

#: flatcamTools/ToolCutOut.py:381 flatcamTools/ToolCutOut.py:538
#: flatcamTools/ToolCutOut.py:666
msgid ""
"[WARNING_NOTCL] Gap size value is missing or wrong format. Add it and retry."
msgstr ""
"[WARNING_NOTCL] Gap size value is missing or wrong format. Add it and retry."

#: flatcamTools/ToolCutOut.py:388 flatcamTools/ToolCutOut.py:545
msgid "[WARNING_NOTCL] Number of gaps value is missing. Add it and retry."
msgstr "[WARNING_NOTCL] Number of gaps value is missing. Add it and retry."

#: flatcamTools/ToolCutOut.py:392 flatcamTools/ToolCutOut.py:549
msgid ""
"[WARNING_NOTCL] Gaps value can be only one of: 'lr', 'tb', '2lr', '2tb', 4 "
"or 8. Fill in a correct value and retry. "
msgstr ""
"[WARNING_NOTCL] Gaps value can be only one of: 'lr', 'tb', '2lr', '2tb', 4 "
"or 8. Fill in a correct value and retry. "

#: flatcamTools/ToolCutOut.py:397 flatcamTools/ToolCutOut.py:554
msgid ""
"[ERROR]Cutout operation cannot be done on a multi-geo Geometry.\n"
"Optionally, this Multi-geo Geometry can be converted to Single-geo "
"Geometry,\n"
"and after that perform Cutout."
msgstr ""
"[ERROR]Cutout operation cannot be done on a multi-geo Geometry.\n"
"Optionally, this Multi-geo Geometry can be converted to Single-geo "
"Geometry,\n"
"and after that perform Cutout."

#: flatcamTools/ToolCutOut.py:483 flatcamTools/ToolCutOut.py:636
msgid "[success] Any form CutOut operation finished."
msgstr "[success] Any form CutOut operation finished."

#: flatcamTools/ToolCutOut.py:503 flatcamTools/ToolPaint.py:768
#: flatcamTools/ToolPanelize.py:358
#, python-format
msgid "[ERROR_NOTCL] Object not found: %s"
msgstr "[ERROR_NOTCL] Object not found: %s"

#: flatcamTools/ToolCutOut.py:517 flatcamTools/ToolCutOut.py:656
#: flatcamTools/ToolCutOut.py:761
msgid ""
"[ERROR_NOTCL] Tool Diameter is zero value. Change it to a positive real "
"number."
msgstr ""
"[ERROR_NOTCL] Tool Diameter is zero value. Change it to a positive real "
"number."

#: flatcamTools/ToolCutOut.py:641
msgid ""
"Click on the selected geometry object perimeter to create a bridge gap ..."
msgstr ""
"Click on the selected geometry object perimeter to create a bridge gap ..."

#: flatcamTools/ToolCutOut.py:682
msgid "Making manual bridge gap..."
msgstr "Making manual bridge gap..."

#: flatcamTools/ToolCutOut.py:705
#, python-format
msgid "[ERROR_NOTCL] Could not retrieve Geometry object: %s"
msgstr "[ERROR_NOTCL] Could not retrieve Geometry object: %s"

#: flatcamTools/ToolCutOut.py:709
#, python-format
msgid "[ERROR_NOTCL] Geometry object for manual cutout not found: %s"
msgstr "[ERROR_NOTCL] Geometry object for manual cutout not found: %s"

#: flatcamTools/ToolCutOut.py:719
msgid "[success] Added manual Bridge Gap."
msgstr "[success] Added manual Bridge Gap."

#: flatcamTools/ToolCutOut.py:736
#, python-format
msgid "[ERROR_NOTCL] Could not retrieve Gerber object: %s"
msgstr "[ERROR_NOTCL] Could not retrieve Gerber object: %s"

#: flatcamTools/ToolCutOut.py:740
msgid ""
"[ERROR_NOTCL] There is no Gerber object selected for Cutout.\n"
"Select one and try again."
msgstr ""
"[ERROR_NOTCL] There is no Gerber object selected for Cutout.\n"
"Select one and try again."

#: flatcamTools/ToolCutOut.py:745
msgid ""
"[ERROR_NOTCL] The selected object has to be of Gerber type.\n"
"Select a Gerber file and try again."
msgstr ""
"[ERROR_NOTCL] The selected object has to be of Gerber type.\n"
"Select a Gerber file and try again."

#: flatcamTools/ToolDblSided.py:18
msgid "2-Sided PCB"
msgstr "2-Sided PCB"

#: flatcamTools/ToolDblSided.py:52 flatcamTools/ToolDblSided.py:76
#: flatcamTools/ToolDblSided.py:100
msgid "Mirror"
msgstr "Mirror"

#: flatcamTools/ToolDblSided.py:54 flatcamTools/ToolDblSided.py:78
#: flatcamTools/ToolDblSided.py:102
msgid ""
"Mirrors (flips) the specified object around \n"
"the specified axis. Does not create a new \n"
"object, but modifies it."
msgstr ""
"Mirrors (flips) the specified object around \n"
"the specified axis. Does not create a new \n"
"object, but modifies it."

#: flatcamTools/ToolDblSided.py:73
msgid "Excellon Object to be mirrored."
msgstr "Excellon Object to be mirrored."

#: flatcamTools/ToolDblSided.py:97
msgid "Geometry Obj to be mirrored."
msgstr "Geometry Obj to be mirrored."

#: flatcamTools/ToolDblSided.py:135
msgid ""
"The axis should pass through a <b>point</b> or cut\n"
" a specified <b>box</b> (in a FlatCAM object) through \n"
"the center."
msgstr ""
"The axis should pass through a <b>point</b> or cut\n"
" a specified <b>box</b> (in a FlatCAM object) through \n"
"the center."

#: flatcamTools/ToolDblSided.py:152
msgid "Point/Box Reference:"
msgstr "Point/Box Reference:"

#: flatcamTools/ToolDblSided.py:154
msgid ""
"If 'Point' is selected above it store the coordinates (x, y) through which\n"
"the mirroring axis passes.\n"
"If 'Box' is selected above, select here a FlatCAM object (Gerber, Exc or "
"Geo).\n"
"Through the center of this object pass the mirroring axis selected above."
msgstr ""
"If 'Point' is selected above it store the coordinates (x, y) through which\n"
"the mirroring axis passes.\n"
"If 'Box' is selected above, select here a FlatCAM object (Gerber, Exc or "
"Geo).\n"
"Through the center of this object pass the mirroring axis selected above."

#: flatcamTools/ToolDblSided.py:162
msgid ""
"Add the coordinates in format <b>(x, y)</b> through which the mirroring "
"axis \n"
" selected in 'MIRROR AXIS' pass.\n"
"The (x, y) coordinates are captured by pressing SHIFT key\n"
"and left mouse button click on canvas or you can enter the coords manually."
msgstr ""
"Add the coordinates in format <b>(x, y)</b> through which the mirroring "
"axis \n"
" selected in 'MIRROR AXIS' pass.\n"
"The (x, y) coordinates are captured by pressing SHIFT key\n"
"and left mouse button click on canvas or you can enter the coords manually."

#: flatcamTools/ToolDblSided.py:182
msgid "Gerber   Reference Box Object"
msgstr "Gerber   Reference Box Object"

#: flatcamTools/ToolDblSided.py:183
msgid "Excellon Reference Box Object"
msgstr "Excellon Reference Box Object"

#: flatcamTools/ToolDblSided.py:184
msgid "Geometry Reference Box Object"
msgstr "Geometry Reference Box Object"

#: flatcamTools/ToolDblSided.py:193
msgid "Alignment Drill Coordinates:"
msgstr "Alignment Drill Coordinates:"

#: flatcamTools/ToolDblSided.py:195
msgid ""
"Alignment holes (x1, y1), (x2, y2), ... on one side of the mirror axis. For "
"each set of (x, y) coordinates\n"
"entered here, a pair of drills will be created:\n"
"\n"
"- one drill at the coordinates from the field\n"
"- one drill in mirror position over the axis selected above in the 'Mirror "
"Axis'."
msgstr ""
"Alignment holes (x1, y1), (x2, y2), ... on one side of the mirror axis. For "
"each set of (x, y) coordinates\n"
"entered here, a pair of drills will be created:\n"
"\n"
"- one drill at the coordinates from the field\n"
"- one drill in mirror position over the axis selected above in the 'Mirror "
"Axis'."

#: flatcamTools/ToolDblSided.py:210
msgid ""
"Add alignment drill holes coords in the format: (x1, y1), (x2, y2), ... \n"
"on one side of the mirror axis.\n"
"\n"
"The coordinates set can be obtained:\n"
"- press SHIFT key and left mouse clicking on canvas. Then click Add.\n"
"- press SHIFT key and left mouse clicking on canvas. Then CTRL+V in the "
"field.\n"
"- press SHIFT key and left mouse clicking on canvas. Then RMB click in the "
"field and click Paste.\n"
"- by entering the coords manually in the format: (x1, y1), (x2, y2), ..."
msgstr ""
"Add alignment drill holes coords in the format: (x1, y1), (x2, y2), ... \n"
"on one side of the mirror axis.\n"
"\n"
"The coordinates set can be obtained:\n"
"- press SHIFT key and left mouse clicking on canvas. Then click Add.\n"
"- press SHIFT key and left mouse clicking on canvas. Then CTRL+V in the "
"field.\n"
"- press SHIFT key and left mouse clicking on canvas. Then RMB click in the "
"field and click Paste.\n"
"- by entering the coords manually in the format: (x1, y1), (x2, y2), ..."

#: flatcamTools/ToolDblSided.py:224
msgid "Alignment Drill Diameter"
msgstr "Alignment Drill Diameter"

#: flatcamTools/ToolDblSided.py:247
msgid "Create Excellon Object"
msgstr "Create Excellon Object"

#: flatcamTools/ToolDblSided.py:249
msgid ""
"Creates an Excellon Object containing the\n"
"specified alignment holes and their mirror\n"
"images."
msgstr ""
"Creates an Excellon Object containing the\n"
"specified alignment holes and their mirror\n"
"images."

#: flatcamTools/ToolDblSided.py:255
msgid "Reset"
msgstr "Reset"

#: flatcamTools/ToolDblSided.py:257
msgid "Resets all the fields."
msgstr "Resets all the fields."

#: flatcamTools/ToolDblSided.py:302
msgid "2-Sided Tool"
msgstr "2-Sided Tool"

#: flatcamTools/ToolDblSided.py:327
msgid ""
"[WARNING_NOTCL] 'Point' reference is selected and 'Point' coordinates are "
"missing. Add them and retry."
msgstr ""
"[WARNING_NOTCL] 'Point' reference is selected and 'Point' coordinates are "
"missing. Add them and retry."

#: flatcamTools/ToolDblSided.py:346
msgid ""
"[WARNING_NOTCL] There is no Box reference object loaded. Load one and retry."
msgstr ""
"[WARNING_NOTCL] There is no Box reference object loaded. Load one and retry."

#: flatcamTools/ToolDblSided.py:368
msgid ""
"[WARNING_NOTCL] No value or wrong format in Drill Dia entry. Add it and "
"retry."
msgstr ""
"[WARNING_NOTCL] No value or wrong format in Drill Dia entry. Add it and "
"retry."

#: flatcamTools/ToolDblSided.py:375
msgid ""
"[WARNING_NOTCL] There are no Alignment Drill Coordinates to use. Add them "
"and retry."
msgstr ""
"[WARNING_NOTCL] There are no Alignment Drill Coordinates to use. Add them "
"and retry."

#: flatcamTools/ToolDblSided.py:397
msgid "[success] Excellon object with alignment drills created..."
msgstr "[success] Excellon object with alignment drills created..."

#: flatcamTools/ToolDblSided.py:406
msgid "[WARNING_NOTCL] There is no Gerber object loaded ..."
msgstr "[WARNING_NOTCL] There is no Gerber object loaded ..."

#: flatcamTools/ToolDblSided.py:410 flatcamTools/ToolDblSided.py:453
#: flatcamTools/ToolDblSided.py:497
msgid ""
"[ERROR_NOTCL] Only Gerber, Excellon and Geometry objects can be mirrored."
msgstr ""
"[ERROR_NOTCL] Only Gerber, Excellon and Geometry objects can be mirrored."

#: flatcamTools/ToolDblSided.py:420
msgid ""
"[WARNING_NOTCL] 'Point' coordinates missing. Using Origin (0, 0) as "
"mirroring reference."
msgstr ""
"[WARNING_NOTCL] 'Point' coordinates missing. Using Origin (0, 0) as "
"mirroring reference."

#: flatcamTools/ToolDblSided.py:430 flatcamTools/ToolDblSided.py:474
#: flatcamTools/ToolDblSided.py:511
msgid "[WARNING_NOTCL] There is no Box object loaded ..."
msgstr "[WARNING_NOTCL] There is no Box object loaded ..."

#: flatcamTools/ToolDblSided.py:440
#, python-format
msgid "[success] Gerber %s was mirrored..."
msgstr "[success] Gerber %s was mirrored..."

#: flatcamTools/ToolDblSided.py:449
msgid "[WARNING_NOTCL] There is no Excellon object loaded ..."
msgstr "[WARNING_NOTCL] There is no Excellon object loaded ..."

#: flatcamTools/ToolDblSided.py:464
msgid ""
"[WARNING_NOTCL] There are no Point coordinates in the Point field. Add "
"coords and try again ..."
msgstr ""
"[WARNING_NOTCL] There are no Point coordinates in the Point field. Add "
"coords and try again ..."

#: flatcamTools/ToolDblSided.py:484
#, python-format
msgid "[success] Excellon %s was mirrored..."
msgstr "[success] Excellon %s was mirrored..."

#: flatcamTools/ToolDblSided.py:493
msgid "[WARNING_NOTCL] There is no Geometry object loaded ..."
msgstr "[WARNING_NOTCL] There is no Geometry object loaded ..."

#: flatcamTools/ToolDblSided.py:521
#, python-format
msgid "[success] Geometry %s was mirrored..."
msgstr "[success] Geometry %s was mirrored..."

#: flatcamTools/ToolFilm.py:25
msgid "Film PCB"
msgstr "Film PCB"

#: flatcamTools/ToolFilm.py:56 flatcamTools/ToolImage.py:53
#: flatcamTools/ToolPanelize.py:56
msgid "Object Type:"
msgstr "Object Type:"

#: flatcamTools/ToolFilm.py:58
msgid ""
"Specify the type of object for which to create the film.\n"
"The object can be of type: Gerber or Geometry.\n"
"The selection here decide the type of objects that will be\n"
"in the Film Object combobox."
msgstr ""
"Specify the type of object for which to create the film.\n"
"The object can be of type: Gerber or Geometry.\n"
"The selection here decide the type of objects that will be\n"
"in the Film Object combobox."

#: flatcamTools/ToolFilm.py:71
msgid "Film Object:"
msgstr "Film Object:"

#: flatcamTools/ToolFilm.py:73
msgid "Object for which to create the film."
msgstr "Object for which to create the film."

#: flatcamTools/ToolFilm.py:89 flatcamTools/ToolPanelize.py:111
msgid "Box Type:"
msgstr "Box Type:"

#: flatcamTools/ToolFilm.py:91
msgid ""
"Specify the type of object to be used as an container for\n"
"film creation. It can be: Gerber or Geometry type.The selection here decide "
"the type of objects that will be\n"
"in the Box Object combobox."
msgstr ""
"Specify the type of object to be used as an container for\n"
"film creation. It can be: Gerber or Geometry type.The selection here decide "
"the type of objects that will be\n"
"in the Box Object combobox."

#: flatcamTools/ToolFilm.py:104 flatcamTools/ToolPanelize.py:126
msgid "Box Object:"
msgstr "Box Object:"

#: flatcamTools/ToolFilm.py:106
msgid ""
"The actual object that is used a container for the\n"
" selected object for which we create the film.\n"
"Usually it is the PCB outline but it can be also the\n"
"same object for which the film is created."
msgstr ""
"The actual object that is used a container for the\n"
" selected object for which we create the film.\n"
"Usually it is the PCB outline but it can be also the\n"
"same object for which the film is created."

#: flatcamTools/ToolFilm.py:157
msgid "Save Film"
msgstr "Save Film"

#: flatcamTools/ToolFilm.py:159
msgid ""
"Create a Film for the selected object, within\n"
"the specified box. Does not create a new \n"
" FlatCAM object, but directly save it in SVG format\n"
"which can be opened with Inkscape."
msgstr ""
"Create a Film for the selected object, within\n"
"the specified box. Does not create a new \n"
" FlatCAM object, but directly save it in SVG format\n"
"which can be opened with Inkscape."

#: flatcamTools/ToolFilm.py:225
msgid ""
"[ERROR_NOTCL] No FlatCAM object selected. Load an object for Film and retry."
msgstr ""
"[ERROR_NOTCL] No FlatCAM object selected. Load an object for Film and retry."

#: flatcamTools/ToolFilm.py:231
msgid ""
"[ERROR_NOTCL] No FlatCAM object selected. Load an object for Box and retry."
msgstr ""
"[ERROR_NOTCL] No FlatCAM object selected. Load an object for Box and retry."

#: flatcamTools/ToolFilm.py:255
msgid "Generating Film ..."
msgstr "Generating Film ..."

#: flatcamTools/ToolFilm.py:260 flatcamTools/ToolFilm.py:264
msgid "Export SVG positive"
msgstr "Export SVG positive"

#: flatcamTools/ToolFilm.py:269
msgid "[WARNING_NOTCL] Export SVG positive cancelled."
msgstr "[WARNING_NOTCL] Export SVG positive cancelled."

#: flatcamTools/ToolFilm.py:276 flatcamTools/ToolFilm.py:280
msgid "Export SVG negative"
msgstr "Export SVG negative"

#: flatcamTools/ToolFilm.py:285
msgid "[WARNING_NOTCL] Export SVG negative cancelled."
msgstr "[WARNING_NOTCL] Export SVG negative cancelled."

#: flatcamTools/ToolImage.py:25
msgid "Image as Object"
msgstr "Image as Object"

#: flatcamTools/ToolImage.py:31
msgid "Image to PCB"
msgstr "Image to PCB"

#: flatcamTools/ToolImage.py:55
msgid ""
"Specify the type of object to create from the image.\n"
"It can be of type: Gerber or Geometry."
msgstr ""
"Specify the type of object to create from the image.\n"
"It can be of type: Gerber or Geometry."

#: flatcamTools/ToolImage.py:63
msgid "DPI value:"
msgstr "DPI value:"

#: flatcamTools/ToolImage.py:65
msgid "Specify a DPI value for the image."
msgstr "Specify a DPI value for the image."

#: flatcamTools/ToolImage.py:72
msgid "Level of detail"
msgstr "Level of detail"

#: flatcamTools/ToolImage.py:81
msgid "Image type"
msgstr "Image type"

#: flatcamTools/ToolImage.py:83
msgid ""
"Choose a method for the image interpretation.\n"
"B/W means a black & white image. Color means a colored image."
msgstr ""
"Choose a method for the image interpretation.\n"
"B/W means a black & white image. Color means a colored image."

#: flatcamTools/ToolImage.py:90 flatcamTools/ToolImage.py:103
#: flatcamTools/ToolImage.py:114 flatcamTools/ToolImage.py:125
msgid "Mask value"
msgstr "Mask value"

#: flatcamTools/ToolImage.py:92
msgid ""
"Mask for monochrome image.\n"
"Takes values between [0 ... 255].\n"
"Decides the level of details to include\n"
"in the resulting geometry.\n"
"0 means no detail and 255 means everything \n"
"(which is totally black)."
msgstr ""
"Mask for monochrome image.\n"
"Takes values between [0 ... 255].\n"
"Decides the level of details to include\n"
"in the resulting geometry.\n"
"0 means no detail and 255 means everything \n"
"(which is totally black)."

#: flatcamTools/ToolImage.py:105
msgid ""
"Mask for RED color.\n"
"Takes values between [0 ... 255].\n"
"Decides the level of details to include\n"
"in the resulting geometry."
msgstr ""
"Mask for RED color.\n"
"Takes values between [0 ... 255].\n"
"Decides the level of details to include\n"
"in the resulting geometry."

#: flatcamTools/ToolImage.py:116
msgid ""
"Mask for GREEN color.\n"
"Takes values between [0 ... 255].\n"
"Decides the level of details to include\n"
"in the resulting geometry."
msgstr ""
"Mask for GREEN color.\n"
"Takes values between [0 ... 255].\n"
"Decides the level of details to include\n"
"in the resulting geometry."

#: flatcamTools/ToolImage.py:127
msgid ""
"Mask for BLUE color.\n"
"Takes values between [0 ... 255].\n"
"Decides the level of details to include\n"
"in the resulting geometry."
msgstr ""
"Mask for BLUE color.\n"
"Takes values between [0 ... 255].\n"
"Decides the level of details to include\n"
"in the resulting geometry."

#: flatcamTools/ToolImage.py:139
msgid "Import image"
msgstr "Import image"

#: flatcamTools/ToolImage.py:141
msgid "Open a image of raster type and then import it in FlatCAM."
msgstr "Open a image of raster type and then import it in FlatCAM."

#: flatcamTools/ToolImage.py:170
msgid "Image Tool"
msgstr "Image Tool"

#: flatcamTools/ToolImage.py:200 flatcamTools/ToolImage.py:203
msgid "Import IMAGE"
msgstr "Import IMAGE"

#: flatcamTools/ToolMeasurement.py:26
msgid "Measurement"
msgstr "Measurement"

#: flatcamTools/ToolMeasurement.py:44
msgid "Units:"
msgstr "Units:"

#: flatcamTools/ToolMeasurement.py:45
msgid "Those are the units in which the distance is measured."
msgstr "Those are the units in which the distance is measured."

#: flatcamTools/ToolMeasurement.py:49
msgid "Start"
msgstr "Start"

#: flatcamTools/ToolMeasurement.py:49 flatcamTools/ToolMeasurement.py:52
msgid "Coords"
msgstr "Coords"

#: flatcamTools/ToolMeasurement.py:50 flatcamTools/ToolMeasurement.py:66
msgid "This is measuring Start point coordinates."
msgstr "This is measuring Start point coordinates."

#: flatcamTools/ToolMeasurement.py:52
msgid "Stop"
msgstr "Stop"

#: flatcamTools/ToolMeasurement.py:53 flatcamTools/ToolMeasurement.py:70
msgid "This is the measuring Stop point coordinates."
msgstr "This is the measuring Stop point coordinates."

#: flatcamTools/ToolMeasurement.py:56 flatcamTools/ToolMeasurement.py:74
msgid "This is the distance measured over the X axis."
msgstr "This is the distance measured over the X axis."

#: flatcamTools/ToolMeasurement.py:59 flatcamTools/ToolMeasurement.py:79
msgid "This is the distance measured over the Y axis."
msgstr "This is the distance measured over the Y axis."

#: flatcamTools/ToolMeasurement.py:61
msgid "DISTANCE"
msgstr "DISTANCE"

#: flatcamTools/ToolMeasurement.py:62 flatcamTools/ToolMeasurement.py:84
msgid "This is the point to point Euclidian distance."
msgstr "This is the point to point Euclidian distance."

#: flatcamTools/ToolMeasurement.py:86
msgid "Measure"
msgstr "Measure"

#: flatcamTools/ToolMeasurement.py:132
msgid "Meas. Tool"
msgstr "Meas. Tool"

#: flatcamTools/ToolMeasurement.py:177
msgid "MEASURING: Click on the Start point ..."
msgstr "MEASURING: Click on the Start point ..."

#: flatcamTools/ToolMeasurement.py:270
msgid "MEASURING: Click on the Destination point ..."
msgstr "MEASURING: Click on the Destination point ..."

#: flatcamTools/ToolMeasurement.py:278
#, python-brace-format
msgid "MEASURING: Result D(x) = {d_x} | D(y) = {d_y} | Distance = {d_z}"
msgstr "MEASURING: Result D(x) = {d_x} | D(y) = {d_y} | Distance = {d_z}"

#: flatcamTools/ToolMove.py:81
msgid "MOVE: Click on the Start point ..."
msgstr "MOVE: Click on the Start point ..."

#: flatcamTools/ToolMove.py:88
msgid "[WARNING_NOTCL] MOVE action cancelled. No object(s) to move."
msgstr "[WARNING_NOTCL] MOVE action cancelled. No object(s) to move."

#: flatcamTools/ToolMove.py:110
msgid "MOVE: Click on the Destination point ..."
msgstr "MOVE: Click on the Destination point ..."

#: flatcamTools/ToolMove.py:128
msgid "Moving ..."
msgstr "Moving ..."

#: flatcamTools/ToolMove.py:135
msgid "[WARNING_NOTCL] No object(s) selected."
msgstr "[WARNING_NOTCL] No object(s) selected."

#: flatcamTools/ToolMove.py:158
#, python-format
msgid "[ERROR_NOTCL] ToolMove.on_left_click() --> %s"
msgstr "[ERROR_NOTCL] ToolMove.on_left_click() --> %s"

#: flatcamTools/ToolMove.py:164
#, python-format
msgid "[success] %s object was moved ..."
msgstr "[success] %s object was moved ..."

#: flatcamTools/ToolMove.py:174
msgid "[ERROR_NOTCL] ToolMove.on_left_click() --> Error when mouse left click."
msgstr ""
"[ERROR_NOTCL] ToolMove.on_left_click() --> Error when mouse left click."

#: flatcamTools/ToolMove.py:202
msgid "[WARNING_NOTCL] Move action cancelled."
msgstr "[WARNING_NOTCL] Move action cancelled."

#: flatcamTools/ToolMove.py:214
msgid "[WARNING_NOTCL] Object(s) not selected"
msgstr "[WARNING_NOTCL] Object(s) not selected"

#: flatcamTools/ToolNonCopperClear.py:26
msgid "Non-Copper Clearing"
msgstr "Non-Copper Clearing"

#: flatcamTools/ToolNonCopperClear.py:64
msgid "Gerber object to be cleared of excess copper.                        "
msgstr "Gerber object to be cleared of excess copper.                        "

#: flatcamTools/ToolNonCopperClear.py:74
msgid ""
"Tools pool from which the algorithm\n"
"will pick the ones used for copper clearing."
msgstr ""
"Tools pool from which the algorithm\n"
"will pick the ones used for copper clearing."

#: flatcamTools/ToolNonCopperClear.py:89
msgid ""
"This is the Tool Number.\n"
"Non copper clearing will start with the tool with the biggest \n"
"diameter, continuing until there are no more tools.\n"
"Only tools that create NCC clearing geometry will still be present\n"
"in the resulting geometry. This is because with some tools\n"
"this function will not be able to create painting geometry."
msgstr ""
"This is the Tool Number.\n"
"Non copper clearing will start with the tool with the biggest \n"
"diameter, continuing until there are no more tools.\n"
"Only tools that create NCC clearing geometry will still be present\n"
"in the resulting geometry. This is because with some tools\n"
"this function will not be able to create painting geometry."

#: flatcamTools/ToolNonCopperClear.py:101 flatcamTools/ToolPaint.py:98
msgid ""
"The Tool Type (TT) can be:<BR>- <B>Circular</B> with 1 ... 4 teeth -> it is "
"informative only. Being circular, <BR>the cut width in material is exactly "
"the tool diameter.<BR>- <B>Ball</B> -> informative only and make reference "
"to the Ball type endmill.<BR>- <B>V-Shape</B> -> it will disable de Z-Cut "
"parameter in the resulting geometry UI form and enable two additional UI "
"form fields in the resulting geometry: V-Tip Dia and V-Tip Angle. Adjusting "
"those two values will adjust the Z-Cut parameter such as the cut width into "
"material will be equal with the value in the Tool Diameter column of this "
"table.<BR>Choosing the <B>V-Shape</B> Tool Type automatically will select "
"the Operation Type in the resulting geometry as Isolation."
msgstr ""
"The Tool Type (TT) can be:<BR>- <B>Circular</B> with 1 ... 4 teeth -> it is "
"informative only. Being circular, <BR>the cut width in material is exactly "
"the tool diameter.<BR>- <B>Ball</B> -> informative only and make reference "
"to the Ball type endmill.<BR>- <B>V-Shape</B> -> it will disable de Z-Cut "
"parameter in the resulting geometry UI form and enable two additional UI "
"form fields in the resulting geometry: V-Tip Dia and V-Tip Angle. Adjusting "
"those two values will adjust the Z-Cut parameter such as the cut width into "
"material will be equal with the value in the Tool Diameter column of this "
"table.<BR>Choosing the <B>V-Shape</B> Tool Type automatically will select "
"the Operation Type in the resulting geometry as Isolation."

#: flatcamTools/ToolNonCopperClear.py:120 flatcamTools/ToolPaint.py:117
msgid "Tool Dia"
msgstr "Tool Dia"

#: flatcamTools/ToolNonCopperClear.py:122
msgid "Diameter for the new tool to add in the Tool Table"
msgstr "Diameter for the new tool to add in the Tool Table"

#: flatcamTools/ToolNonCopperClear.py:148 flatcamTools/ToolPaint.py:145
#: flatcamTools/ToolSolderPaste.py:123
msgid ""
"Delete a selection of tools in the Tool Table\n"
"by first selecting a row(s) in the Tool Table."
msgstr ""
"Delete a selection of tools in the Tool Table\n"
"by first selecting a row(s) in the Tool Table."

#: flatcamTools/ToolNonCopperClear.py:226
msgid ""
"If checked, use 'rest machining'.\n"
"Basically it will clear copper outside PCB features,\n"
"using the biggest tool and continue with the next tools,\n"
"from bigger to smaller, to clear areas of copper that\n"
"could not be cleared by previous tool, until there is\n"
"no more copper to clear or there are no more tools.\n"
"If not checked, use the standard algorithm."
msgstr ""
"If checked, use 'rest machining'.\n"
"Basically it will clear copper outside PCB features,\n"
"using the biggest tool and continue with the next tools,\n"
"from bigger to smaller, to clear areas of copper that\n"
"could not be cleared by previous tool, until there is\n"
"no more copper to clear or there are no more tools.\n"
"If not checked, use the standard algorithm."

#: flatcamTools/ToolNonCopperClear.py:238
msgid "Generate Geometry"
msgstr "Generate Geometry"

#: flatcamTools/ToolNonCopperClear.py:485 flatcamTools/ToolPaint.py:544
#: flatcamTools/ToolSolderPaste.py:761
msgid "[WARNING_NOTCL] Please enter a tool diameter to add, in Float format."
msgstr "[WARNING_NOTCL] Please enter a tool diameter to add, in Float format."

#: flatcamTools/ToolNonCopperClear.py:513 flatcamTools/ToolPaint.py:568
msgid "[WARNING_NOTCL] Adding tool cancelled. Tool already in Tool Table."
msgstr "[WARNING_NOTCL] Adding tool cancelled. Tool already in Tool Table."

#: flatcamTools/ToolNonCopperClear.py:518 flatcamTools/ToolPaint.py:573
msgid "[success] New tool added to Tool Table."
msgstr "[success] New tool added to Tool Table."

#: flatcamTools/ToolNonCopperClear.py:560 flatcamTools/ToolPaint.py:616
msgid "[success] Tool from Tool Table was edited."
msgstr "[success] Tool from Tool Table was edited."

#: flatcamTools/ToolNonCopperClear.py:571 flatcamTools/ToolPaint.py:627
#: flatcamTools/ToolSolderPaste.py:847
msgid ""
"[WARNING_NOTCL] Edit cancelled. New diameter value is already in the Tool "
"Table."
msgstr ""
"[WARNING_NOTCL] Edit cancelled. New diameter value is already in the Tool "
"Table."

#: flatcamTools/ToolNonCopperClear.py:610 flatcamTools/ToolPaint.py:724
msgid "[WARNING_NOTCL] Delete failed. Select a tool to delete."
msgstr "[WARNING_NOTCL] Delete failed. Select a tool to delete."

#: flatcamTools/ToolNonCopperClear.py:615 flatcamTools/ToolPaint.py:729
msgid "[success] Tool(s) deleted from Tool Table."
msgstr "[success] Tool(s) deleted from Tool Table."

#: flatcamTools/ToolNonCopperClear.py:633 flatcamTools/ToolPaint.py:748
msgid ""
"[ERROR_NOTCL] Overlap value must be between 0 (inclusive) and 1 (exclusive), "
msgstr ""
"[ERROR_NOTCL] Overlap value must be between 0 (inclusive) and 1 (exclusive), "

#: flatcamTools/ToolNonCopperClear.py:673
msgid "[ERROR_NOTCL] No Gerber file available."
msgstr "[ERROR_NOTCL] No Gerber file available."

#: flatcamTools/ToolNonCopperClear.py:711
#: flatcamTools/ToolNonCopperClear.py:833
msgid "Clearing Non-Copper areas."
msgstr "Clearing Non-Copper areas."

#: flatcamTools/ToolNonCopperClear.py:729
#, python-format
msgid "[success] Non-Copper Clearing with ToolDia = %s started."
msgstr "[success] Non-Copper Clearing with ToolDia = %s started."

#: flatcamTools/ToolNonCopperClear.py:798
#, python-format
msgid "[ERROR_NOTCL] NCCTool.clear_non_copper() --> %s"
msgstr "[ERROR_NOTCL] NCCTool.clear_non_copper() --> %s"

#: flatcamTools/ToolNonCopperClear.py:803
msgid "[success] NCC Tool finished."
msgstr "[success] NCC Tool finished."

#: flatcamTools/ToolNonCopperClear.py:805
msgid ""
"[WARNING_NOTCL] NCC Tool finished but some PCB features could not be "
"cleared. Check the result."
msgstr ""
"[WARNING_NOTCL] NCC Tool finished but some PCB features could not be "
"cleared. Check the result."

#: flatcamTools/ToolNonCopperClear.py:851
#, python-format
msgid "[success] Non-Copper Rest Clearing with ToolDia = %s started."
msgstr "[success] Non-Copper Rest Clearing with ToolDia = %s started."

#: flatcamTools/ToolNonCopperClear.py:949
#, python-format
msgid "[ERROR_NOTCL] NCCTool.clear_non_copper_rest() --> %s"
msgstr "[ERROR_NOTCL] NCCTool.clear_non_copper_rest() --> %s"

#: flatcamTools/ToolNonCopperClear.py:957
msgid ""
"[ERROR_NOTCL] NCC Tool finished but could not clear the object with current "
"settings."
msgstr ""
"[ERROR_NOTCL] NCC Tool finished but could not clear the object with current "
"settings."

#: flatcamTools/ToolPDF.py:38
msgid "PDF Import Tool"
msgstr "PDF Import Tool"

#: flatcamTools/ToolPDF.py:152 flatcamTools/ToolPDF.py:156
msgid "Open PDF"
msgstr "Open PDF"

#: flatcamTools/ToolPDF.py:159
msgid "[WARNING_NOTCL] Open PDF cancelled."
msgstr "[WARNING_NOTCL] Open PDF cancelled."

#: flatcamTools/ToolPDF.py:186
msgid "Parsing PDF file ..."
msgstr "Parsing PDF file ..."

#: flatcamTools/ToolPDF.py:265 flatcamTools/ToolPDF.py:338
#, python-format
msgid "Rendering PDF layer #%d ..."
msgstr "Rendering PDF layer #%d ..."

#: flatcamTools/ToolPDF.py:269 flatcamTools/ToolPDF.py:342
msgid "[ERROR_NOTCL] Open PDF file failed."
msgstr "[ERROR_NOTCL] Open PDF file failed."

#: flatcamTools/ToolPDF.py:274 flatcamTools/ToolPDF.py:347
#, python-format
msgid "[success] Rendered: %s"
msgstr "[success] Rendered: %s"

#: flatcamTools/ToolPaint.py:24
msgid "Paint Area"
msgstr "Paint Area"

#: flatcamTools/ToolPaint.py:60
msgid "Geometry:"
msgstr "Geometry:"

#: flatcamTools/ToolPaint.py:62
msgid "Geometry object to be painted.                        "
msgstr "Geometry object to be painted.                        "

#: flatcamTools/ToolPaint.py:71
msgid ""
"Tools pool from which the algorithm\n"
"will pick the ones used for painting."
msgstr ""
"Tools pool from which the algorithm\n"
"will pick the ones used for painting."

#: flatcamTools/ToolPaint.py:86
msgid ""
"This is the Tool Number.\n"
"Painting will start with the tool with the biggest diameter,\n"
"continuing until there are no more tools.\n"
"Only tools that create painting geometry will still be present\n"
"in the resulting geometry. This is because with some tools\n"
"this function will not be able to create painting geometry."
msgstr ""
"This is the Tool Number.\n"
"Painting will start with the tool with the biggest diameter,\n"
"continuing until there are no more tools.\n"
"Only tools that create painting geometry will still be present\n"
"in the resulting geometry. This is because with some tools\n"
"this function will not be able to create painting geometry."

#: flatcamTools/ToolPaint.py:119
msgid "Diameter for the new tool."
msgstr "Diameter for the new tool."

#: flatcamTools/ToolPaint.py:224
msgid ""
"If checked, use 'rest machining'.\n"
"Basically it will clear copper outside PCB features,\n"
"using the biggest tool and continue with the next tools,\n"
"from bigger to smaller, to clear areas of copper that\n"
"could not be cleared by previous tool, until there is\n"
"no more copper to clear or there are no more tools.\n"
"\n"
"If not checked, use the standard algorithm."
msgstr ""
"If checked, use 'rest machining'.\n"
"Basically it will clear copper outside PCB features,\n"
"using the biggest tool and continue with the next tools,\n"
"from bigger to smaller, to clear areas of copper that\n"
"could not be cleared by previous tool, until there is\n"
"no more copper to clear or there are no more tools.\n"
"\n"
"If not checked, use the standard algorithm."

#: flatcamTools/ToolPaint.py:239
msgid ""
"How to select the polygons to paint.<BR>Options:<BR>- <B>Single</B>: left "
"mouse click on the polygon to be painted.<BR>- <B>All</B>: paint all "
"polygons."
msgstr ""
"How to select the polygons to paint.<BR>Options:<BR>- <B>Single</B>: left "
"mouse click on the polygon to be painted.<BR>- <B>All</B>: paint all "
"polygons."

#: flatcamTools/ToolPaint.py:254
msgid "Create Paint Geometry"
msgstr "Create Paint Geometry"

#: flatcamTools/ToolPaint.py:256
msgid ""
"After clicking here, click inside<BR>the polygon you wish to be painted if "
"<B>Single</B> is selected.<BR>If <B>All</B>  is selected then the Paint will "
"start after click.<BR>A new Geometry object with the tool<BR>paths will be "
"created."
msgstr ""
"After clicking here, click inside<BR>the polygon you wish to be painted if "
"<B>Single</B> is selected.<BR>If <B>All</B>  is selected then the Paint will "
"start after click.<BR>A new Geometry object with the tool<BR>paths will be "
"created."

#: flatcamTools/ToolPaint.py:733
msgid "geometry_on_paint_button"
msgstr "geometry_on_paint_button"

#: flatcamTools/ToolPaint.py:752 flatcamTools/ToolPaint.py:787
msgid "[WARNING_NOTCL] Click inside the desired polygon."
msgstr "[WARNING_NOTCL] Click inside the desired polygon."

#: flatcamTools/ToolPaint.py:774
msgid "[ERROR_NOTCL] Can't do Paint on MultiGeo geometries ..."
msgstr "[ERROR_NOTCL] Can't do Paint on MultiGeo geometries ..."

#: flatcamTools/ToolPaint.py:796 flatcamTools/ToolPaint.py:1003
msgid "Painting polygon..."
msgstr "Painting polygon..."

#: flatcamTools/ToolPaint.py:851
msgid "[WARNING] No polygon found."
msgstr "[WARNING] No polygon found."

#: flatcamTools/ToolPaint.py:854
msgid "Painting polygon."
msgstr "Painting polygon."

#: flatcamTools/ToolPaint.py:896
msgid "[ERROR_NOTCL] Geometry could not be painted completely"
msgstr "[ERROR_NOTCL] Geometry could not be painted completely"

#: flatcamTools/ToolPaint.py:922
#, python-format
msgid ""
"[ERROR] Could not do Paint. Try a different combination of parameters. Or a "
"different strategy of paint\n"
"%s"
msgstr ""
"[ERROR] Could not do Paint. Try a different combination of parameters. Or a "
"different strategy of paint\n"
"%s"

#: flatcamTools/ToolPaint.py:964
#, python-format
msgid "[ERROR_NOTCL] PaintTool.paint_poly() --> %s"
msgstr "[ERROR_NOTCL] PaintTool.paint_poly() --> %s"

#: flatcamTools/ToolPaint.py:970 flatcamTools/ToolPaint.py:1263
msgid "Polygon Paint started ..."
msgstr "Polygon Paint started ..."

#: flatcamTools/ToolPaint.py:1119 flatcamTools/ToolPaint.py:1208
#, python-format
msgid ""
"[ERROR] Could not do Paint All. Try a different combination of parameters. "
"Or a different Method of paint\n"
"%s"
msgstr ""
"[ERROR] Could not do Paint All. Try a different combination of parameters. "
"Or a different Method of paint\n"
"%s"

#: flatcamTools/ToolPaint.py:1143
msgid ""
"[ERROR] There is no Painting Geometry in the file.\n"
"Usually it means that the tool diameter is too big for the painted "
"geometry.\n"
"Change the painting parameters and try again."
msgstr ""
"[ERROR] There is no Painting Geometry in the file.\n"
"Usually it means that the tool diameter is too big for the painted "
"geometry.\n"
"Change the painting parameters and try again."

#: flatcamTools/ToolPaint.py:1152
msgid "[success] Paint All Done."
msgstr "[success] Paint All Done."

#: flatcamTools/ToolPaint.py:1238
msgid ""
"[ERROR_NOTCL] There is no Painting Geometry in the file.\n"
"Usually it means that the tool diameter is too big for the painted "
"geometry.\n"
"Change the painting parameters and try again."
msgstr ""
"[ERROR_NOTCL] There is no Painting Geometry in the file.\n"
"Usually it means that the tool diameter is too big for the painted "
"geometry.\n"
"Change the painting parameters and try again."

#: flatcamTools/ToolPaint.py:1247
msgid "[success] Paint All with Rest-Machining done."
msgstr "[success] Paint All with Rest-Machining done."

#: flatcamTools/ToolPanelize.py:25
msgid "Panelize PCB"
msgstr "Panelize PCB"

#: flatcamTools/ToolPanelize.py:58
msgid ""
"Specify the type of object to be panelized\n"
"It can be of type: Gerber, Excellon or Geometry.\n"
"The selection here decide the type of objects that will be\n"
"in the Object combobox."
msgstr ""
"Specify the type of object to be panelized\n"
"It can be of type: Gerber, Excellon or Geometry.\n"
"The selection here decide the type of objects that will be\n"
"in the Object combobox."

#: flatcamTools/ToolPanelize.py:73
msgid ""
"Object to be panelized. This means that it will\n"
"be duplicated in an array of rows and columns."
msgstr ""
"Object to be panelized. This means that it will\n"
"be duplicated in an array of rows and columns."

#: flatcamTools/ToolPanelize.py:86
msgid "<b>Penelization Reference:</b>"
msgstr "<b>Penelization Reference:</b>"

#: flatcamTools/ToolPanelize.py:88
msgid ""
"Choose the reference for panelization:\n"
"- Object = the bounding box of a different object\n"
"- Bounding Box = the bounding box of the object to be panelized\n"
"\n"
"The reference is useful when doing panelization for more than one\n"
"object. The spacings (really offsets) will be applied in reference\n"
"to this reference object therefore maintaining the panelized\n"
"objects in sync."
msgstr ""
"Choose the reference for panelization:\n"
"- Object = the bounding box of a different object\n"
"- Bounding Box = the bounding box of the object to be panelized\n"
"\n"
"The reference is useful when doing panelization for more than one\n"
"object. The spacings (really offsets) will be applied in reference\n"
"to this reference object therefore maintaining the panelized\n"
"objects in sync."

#: flatcamTools/ToolPanelize.py:113
msgid ""
"Specify the type of object to be used as an container for\n"
"panelization. It can be: Gerber or Geometry type.\n"
"The selection here decide the type of objects that will be\n"
"in the Box Object combobox."
msgstr ""
"Specify the type of object to be used as an container for\n"
"panelization. It can be: Gerber or Geometry type.\n"
"The selection here decide the type of objects that will be\n"
"in the Box Object combobox."

#: flatcamTools/ToolPanelize.py:128
msgid ""
"The actual object that is used a container for the\n"
" selected object that is to be panelized."
msgstr ""
"The actual object that is used a container for the\n"
" selected object that is to be panelized."

#: flatcamTools/ToolPanelize.py:134
msgid "<b>Panel Data:</b>"
msgstr "<b>Panel Data:</b>"

#: flatcamTools/ToolPanelize.py:136
msgid ""
"This informations will shape the resulting panel.\n"
"The number of rows and columns will set how many\n"
"duplicates of the original geometry will be generated.\n"
"\n"
"The spacings will set the distance between any two\n"
"elements of the panel array."
msgstr ""
"This informations will shape the resulting panel.\n"
"The number of rows and columns will set how many\n"
"duplicates of the original geometry will be generated.\n"
"\n"
"The spacings will set the distance between any two\n"
"elements of the panel array."

#: flatcamTools/ToolPanelize.py:183
msgid "<b>Panel Type:</b>"
msgstr "<b>Panel Type:</b>"

#: flatcamTools/ToolPanelize.py:185
msgid ""
"Choose the type of object for the panel object:\n"
"- Geometry\n"
"- Gerber"
msgstr ""
"Choose the type of object for the panel object:\n"
"- Geometry\n"
"- Gerber"

#: flatcamTools/ToolPanelize.py:193
msgid "Constrain panel within:"
msgstr "Constrain panel within:"

#: flatcamTools/ToolPanelize.py:227
msgid "Panelize Object"
msgstr "Panelize Object"

#: flatcamTools/ToolPanelize.py:229
msgid ""
"Panelize the specified object around the specified box.\n"
"In other words it creates multiple copies of the source object,\n"
"arranged in a 2D array of rows and columns."
msgstr ""
"Panelize the specified object around the specified box.\n"
"In other words it creates multiple copies of the source object,\n"
"arranged in a 2D array of rows and columns."

#: flatcamTools/ToolPanelize.py:370
#, python-format
msgid "[WARNING_NOTCL]No object Box. Using instead %s"
msgstr "[WARNING_NOTCL]No object Box. Using instead %s"

#: flatcamTools/ToolPanelize.py:453
msgid ""
"[ERROR_NOTCL] Columns or Rows are zero value. Change them to a positive "
"integer."
msgstr ""
"[ERROR_NOTCL] Columns or Rows are zero value. Change them to a positive "
"integer."

#: flatcamTools/ToolPanelize.py:478 flatcamTools/ToolPanelize.py:635
msgid "Generating panel ... Please wait."
msgstr "Generating panel ... Please wait."

#: flatcamTools/ToolPanelize.py:628
msgid "[success] Panel done..."
msgstr "[success] Panel done..."

#: flatcamTools/ToolPanelize.py:631
#, python-brace-format
msgid ""
"[WARNING] Too big for the constrain area. Final panel has {col} columns and "
"{row} rows"
msgstr ""
"[WARNING] Too big for the constrain area. Final panel has {col} columns and "
"{row} rows"

#: flatcamTools/ToolPanelize.py:640
msgid "[success] Panel created successfully."
msgstr "[success] Panel created successfully."

#: flatcamTools/ToolPcbWizard.py:32
msgid "PcbWizard Import Tool"
msgstr "PcbWizard Import Tool"

#: flatcamTools/ToolPcbWizard.py:40
msgid "Import 2-file Excellon"
msgstr "Import 2-file Excellon"

#: flatcamTools/ToolPcbWizard.py:57
msgid "Excellon file:"
msgstr "Excellon file:"

#: flatcamTools/ToolPcbWizard.py:59
msgid ""
"Load the Excellon file.\n"
"Usually it has a .DRL extension"
msgstr ""
"Load the Excellon file.\n"
"Usually it has a .DRL extension"

#: flatcamTools/ToolPcbWizard.py:66
msgid "INF file:"
msgstr "INF file:"

#: flatcamTools/ToolPcbWizard.py:68
msgid "Load the INF file."
msgstr "Load the INF file."

#: flatcamTools/ToolPcbWizard.py:81
msgid "Tool Number"
msgstr "Tool Number"

#: flatcamTools/ToolPcbWizard.py:83
msgid "Tool diameter in file units."
msgstr "Tool diameter in file units."

#: flatcamTools/ToolPcbWizard.py:97
msgid "Int. digits:"
msgstr "Int. digits:"

#: flatcamTools/ToolPcbWizard.py:99
msgid "The number of digits for the integral part of the coordinates."
msgstr "The number of digits for the integral part of the coordinates."

#: flatcamTools/ToolPcbWizard.py:106
msgid "Frac. digits:"
msgstr "Frac. digits:"

#: flatcamTools/ToolPcbWizard.py:108
msgid "The number of digits for the fractional part of the coordinates."
msgstr "The number of digits for the fractional part of the coordinates."

#: flatcamTools/ToolPcbWizard.py:116
msgid "Zeros supp.:"
msgstr "Zeros supp.:"

#: flatcamTools/ToolPcbWizard.py:118
msgid ""
"The type of zeros suppression used.\n"
"Can be of type:\n"
"- LZ = leading zeros are kept\n"
"- TZ = trailing zeros are kept\n"
"- No Suppression = no zero suppression"
msgstr ""
"The type of zeros suppression used.\n"
"Can be of type:\n"
"- LZ = leading zeros are kept\n"
"- TZ = trailing zeros are kept\n"
"- No Suppression = no zero suppression"

#: flatcamTools/ToolPcbWizard.py:129
msgid "Units"
msgstr "Units"

#: flatcamTools/ToolPcbWizard.py:131
msgid ""
"The type of units that the coordinates and tool\n"
"diameters are using. Can be INCH or MM."
msgstr ""
"The type of units that the coordinates and tool\n"
"diameters are using. Can be INCH or MM."

#: flatcamTools/ToolPcbWizard.py:138
msgid "Import Excellon"
msgstr "Import Excellon"

#: flatcamTools/ToolPcbWizard.py:140
msgid ""
"Import in FlatCAM an Excellon file\n"
"that store it's information's in 2 files.\n"
"One usually has .DRL extension while\n"
"the other has .INF extension."
msgstr ""
"Import in FlatCAM an Excellon file\n"
"that store it's information's in 2 files.\n"
"One usually has .DRL extension while\n"
"the other has .INF extension."

#: flatcamTools/ToolPcbWizard.py:194
msgid "PCBWizard Tool"
msgstr "PCBWizard Tool"

#: flatcamTools/ToolPcbWizard.py:288 flatcamTools/ToolPcbWizard.py:292
msgid "Load PcbWizard Excellon file"
msgstr "Load PcbWizard Excellon file"

#: flatcamTools/ToolPcbWizard.py:312 flatcamTools/ToolPcbWizard.py:316
msgid "Load PcbWizard INF file"
msgstr "Load PcbWizard INF file"

#: flatcamTools/ToolPcbWizard.py:363
msgid ""
"[ERROR] The INF file does not contain the tool table.\n"
"Try to open the Excellon file from File -> Open -> Excellon\n"
"and edit the drill diameters manually."
msgstr ""
"[ERROR] The INF file does not contain the tool table.\n"
"Try to open the Excellon file from File -> Open -> Excellon\n"
"and edit the drill diameters manually."

#: flatcamTools/ToolPcbWizard.py:383
msgid "[success] PcbWizard .INF file loaded."
msgstr "[success] PcbWizard .INF file loaded."

#: flatcamTools/ToolPcbWizard.py:387
msgid "[success] Main PcbWizard Excellon file loaded."
msgstr "[success] Main PcbWizard Excellon file loaded."

#: flatcamTools/ToolPcbWizard.py:424
#, python-format
msgid "[ERROR_NOTCL] Cannot parse file: %s"
msgstr "[ERROR_NOTCL] Cannot parse file: %s"

#: flatcamTools/ToolPcbWizard.py:447
msgid "Importing Excellon."
msgstr "Importing Excellon."

#: flatcamTools/ToolPcbWizard.py:454
msgid "[ERROR_NOTCL] Import Excellon file failed."
msgstr "[ERROR_NOTCL] Import Excellon file failed."

#: flatcamTools/ToolPcbWizard.py:461
#, python-format
msgid "[success] Imported: %s"
msgstr "[success] Imported: %s"

#: flatcamTools/ToolPcbWizard.py:464
msgid "[WARNING_NOTCL] Excellon merging is in progress. Please wait..."
msgstr "[WARNING_NOTCL] Excellon merging is in progress. Please wait..."

#: flatcamTools/ToolPcbWizard.py:466
msgid "[ERROR_NOTCL] The imported Excellon file is None."
msgstr "[ERROR_NOTCL] The imported Excellon file is None."

#: flatcamTools/ToolProperties.py:103
msgid "[ERROR_NOTCL] Properties Tool was not displayed. No object selected."
msgstr "[ERROR_NOTCL] Properties Tool was not displayed. No object selected."

#: flatcamTools/ToolProperties.py:110
msgid "[success] Object Properties are displayed."
msgstr "[success] Object Properties are displayed."

#: flatcamTools/ToolProperties.py:111
msgid "Properties Tool"
msgstr "Properties Tool"

#: flatcamTools/ToolShell.py:69
msgid "...proccessing..."
msgstr "...proccessing..."

#: flatcamTools/ToolShell.py:71
#, python-format
msgid "...proccessing... [%s]"
msgstr "...proccessing... [%s]"

#: flatcamTools/ToolSolderPaste.py:37
msgid "Solder Paste Tool"
msgstr "Solder Paste Tool"

#: flatcamTools/ToolSolderPaste.py:65
msgid "Gerber Solder paste object.                        "
msgstr "Gerber Solder paste object.                        "

#: flatcamTools/ToolSolderPaste.py:72
msgid ""
"Tools pool from which the algorithm\n"
"will pick the ones used for dispensing solder paste."
msgstr ""
"Tools pool from which the algorithm\n"
"will pick the ones used for dispensing solder paste."

#: flatcamTools/ToolSolderPaste.py:87
msgid ""
"This is the Tool Number.\n"
"The solder dispensing will start with the tool with the biggest \n"
"diameter, continuing until there are no more Nozzle tools.\n"
"If there are no longer tools but there are still pads not covered\n"
" with solder paste, the app will issue a warning message box."
msgstr ""
"This is the Tool Number.\n"
"The solder dispensing will start with the tool with the biggest \n"
"diameter, continuing until there are no more Nozzle tools.\n"
"If there are no longer tools but there are still pads not covered\n"
" with solder paste, the app will issue a warning message box."

#: flatcamTools/ToolSolderPaste.py:94
msgid ""
"Nozzle tool Diameter. It's value (in current FlatCAM units)\n"
"is the width of the solder paste dispensed."
msgstr ""
"Nozzle tool Diameter. It's value (in current FlatCAM units)\n"
"is the width of the solder paste dispensed."

#: flatcamTools/ToolSolderPaste.py:101
msgid "New Nozzle Tool"
msgstr "New Nozzle Tool"

#: flatcamTools/ToolSolderPaste.py:117
msgid ""
"Add a new nozzle tool to the Tool Table\n"
"with the diameter specified above."
msgstr ""
"Add a new nozzle tool to the Tool Table\n"
"with the diameter specified above."

#: flatcamTools/ToolSolderPaste.py:129
msgid "Generate solder paste dispensing geometry."
msgstr "Generate solder paste dispensing geometry."

#: flatcamTools/ToolSolderPaste.py:142
msgid "STEP 1"
msgstr "STEP 1"

#: flatcamTools/ToolSolderPaste.py:144
msgid ""
"First step is to select a number of nozzle tools for usage\n"
"and then optionally modify the GCode parameters bellow."
msgstr ""
"First step is to select a number of nozzle tools for usage\n"
"and then optionally modify the GCode parameters bellow."

#: flatcamTools/ToolSolderPaste.py:147
msgid ""
"Select tools.\n"
"Modify parameters."
msgstr ""
"Select tools.\n"
"Modify parameters."

#: flatcamTools/ToolSolderPaste.py:236
msgid ""
"Feedrate (speed) while moving up vertically\n"
" to Dispense position (on Z plane)."
msgstr ""
"Feedrate (speed) while moving up vertically\n"
" to Dispense position (on Z plane)."

#: flatcamTools/ToolSolderPaste.py:290
msgid "Generate GCode"
msgstr "Generate GCode"

#: flatcamTools/ToolSolderPaste.py:292
msgid ""
"Generate GCode for Solder Paste dispensing\n"
"on PCB pads."
msgstr ""
"Generate GCode for Solder Paste dispensing\n"
"on PCB pads."

#: flatcamTools/ToolSolderPaste.py:308
msgid "STEP 2:"
msgstr "STEP 2:"

#: flatcamTools/ToolSolderPaste.py:310
msgid ""
"Second step is to create a solder paste dispensing\n"
"geometry out of an Solder Paste Mask Gerber file."
msgstr ""
"Second step is to create a solder paste dispensing\n"
"geometry out of an Solder Paste Mask Gerber file."

#: flatcamTools/ToolSolderPaste.py:326
msgid "Geo Result:"
msgstr "Geo Result:"

#: flatcamTools/ToolSolderPaste.py:328
msgid ""
"Geometry Solder Paste object.\n"
"The name of the object has to end in:\n"
"'_solderpaste' as a protection."
msgstr ""
"Geometry Solder Paste object.\n"
"The name of the object has to end in:\n"
"'_solderpaste' as a protection."

#: flatcamTools/ToolSolderPaste.py:337
msgid "STEP 3:"
msgstr "STEP 3:"

#: flatcamTools/ToolSolderPaste.py:339
msgid ""
"Third step is to select a solder paste dispensing geometry,\n"
"and then generate a CNCJob object.\n"
"\n"
"REMEMBER: if you want to create a CNCJob with new parameters,\n"
"first you need to generate a geometry with those new params,\n"
"and only after that you can generate an updated CNCJob."
msgstr ""
"Third step is to select a solder paste dispensing geometry,\n"
"and then generate a CNCJob object.\n"
"\n"
"REMEMBER: if you want to create a CNCJob with new parameters,\n"
"first you need to generate a geometry with those new params,\n"
"and only after that you can generate an updated CNCJob."

#: flatcamTools/ToolSolderPaste.py:359
msgid "CNC Result:"
msgstr "CNC Result:"

#: flatcamTools/ToolSolderPaste.py:361
msgid ""
"CNCJob Solder paste object.\n"
"In order to enable the GCode save section,\n"
"the name of the object has to end in:\n"
"'_solderpaste' as a protection."
msgstr ""
"CNCJob Solder paste object.\n"
"In order to enable the GCode save section,\n"
"the name of the object has to end in:\n"
"'_solderpaste' as a protection."

#: flatcamTools/ToolSolderPaste.py:371
msgid "View GCode"
msgstr "View GCode"

#: flatcamTools/ToolSolderPaste.py:373
msgid ""
"View the generated GCode for Solder Paste dispensing\n"
"on PCB pads."
msgstr ""
"View the generated GCode for Solder Paste dispensing\n"
"on PCB pads."

#: flatcamTools/ToolSolderPaste.py:377
msgid "Save GCode"
msgstr "Save GCode"

#: flatcamTools/ToolSolderPaste.py:379
msgid ""
"Save the generated GCode for Solder Paste dispensing\n"
"on PCB pads, to a file."
msgstr ""
"Save the generated GCode for Solder Paste dispensing\n"
"on PCB pads, to a file."

#: flatcamTools/ToolSolderPaste.py:383
msgid "STEP 4:"
msgstr "STEP 4:"

#: flatcamTools/ToolSolderPaste.py:385
msgid ""
"Fourth step (and last) is to select a CNCJob made from \n"
"a solder paste dispensing geometry, and then view/save it's GCode."
msgstr ""
"Fourth step (and last) is to select a CNCJob made from \n"
"a solder paste dispensing geometry, and then view/save it's GCode."

#: flatcamTools/ToolSolderPaste.py:413
msgid "Delete Object"
msgstr "Delete Object"

#: flatcamTools/ToolSolderPaste.py:789
msgid ""
"[WARNING_NOTCL] Adding Nozzle tool cancelled. Tool already in Tool Table."
msgstr ""
"[WARNING_NOTCL] Adding Nozzle tool cancelled. Tool already in Tool Table."

#: flatcamTools/ToolSolderPaste.py:794
msgid "[success] New Nozzle tool added to Tool Table."
msgstr "[success] New Nozzle tool added to Tool Table."

#: flatcamTools/ToolSolderPaste.py:836
msgid "[success] Nozzle tool from Tool Table was edited."
msgstr "[success] Nozzle tool from Tool Table was edited."

#: flatcamTools/ToolSolderPaste.py:892
msgid "[WARNING_NOTCL] Delete failed. Select a Nozzle tool to delete."
msgstr "[WARNING_NOTCL] Delete failed. Select a Nozzle tool to delete."

#: flatcamTools/ToolSolderPaste.py:897
msgid "[success] Nozzle tool(s) deleted from Tool Table."
msgstr "[success] Nozzle tool(s) deleted from Tool Table."

#: flatcamTools/ToolSolderPaste.py:952
msgid "[WARNING_NOTCL] No SolderPaste mask Gerber object loaded."
msgstr "[WARNING_NOTCL] No SolderPaste mask Gerber object loaded."

#: flatcamTools/ToolSolderPaste.py:969
msgid "Creating Solder Paste dispensing geometry."
msgstr "Creating Solder Paste dispensing geometry."

#: flatcamTools/ToolSolderPaste.py:981
msgid "[WARNING_NOTCL] No Nozzle tools in the tool table."
msgstr "[WARNING_NOTCL] No Nozzle tools in the tool table."

#: flatcamTools/ToolSolderPaste.py:1110
msgid "[success] Solder Paste geometry generated successfully..."
msgstr "[success] Solder Paste geometry generated successfully..."

#: flatcamTools/ToolSolderPaste.py:1116
msgid ""
"[WARNING_NOTCL] Some or all pads have no solder due of inadequate nozzle "
"diameters..."
msgstr ""
"[WARNING_NOTCL] Some or all pads have no solder due of inadequate nozzle "
"diameters..."

#: flatcamTools/ToolSolderPaste.py:1130
msgid "Generating Solder Paste dispensing geometry..."
msgstr "Generating Solder Paste dispensing geometry..."

#: flatcamTools/ToolSolderPaste.py:1150
msgid "[WARNING_NOTCL] There is no Geometry object available."
msgstr "[WARNING_NOTCL] There is no Geometry object available."

#: flatcamTools/ToolSolderPaste.py:1154
msgid ""
"[WARNING_NOTCL] This Geometry can't be processed. NOT a solder_paste_tool "
"geometry."
msgstr ""
"[WARNING_NOTCL] This Geometry can't be processed. NOT a solder_paste_tool "
"geometry."

#: flatcamTools/ToolSolderPaste.py:1259
#, python-format
msgid "[success] ToolSolderPaste CNCjob created: %s"
msgstr "[success] ToolSolderPaste CNCjob created: %s"

#: flatcamTools/ToolSolderPaste.py:1291 flatcamTools/ToolSolderPaste.py:1295
#: flatcamTools/ToolSolderPaste.py:1346
msgid ""
"[WARNING_NOTCL] This CNCJob object can't be processed. NOT a "
"solder_paste_tool CNCJob object."
msgstr ""
"[WARNING_NOTCL] This CNCJob object can't be processed. NOT a "
"solder_paste_tool CNCJob object."

#: flatcamTools/ToolSolderPaste.py:1318
msgid "[ERROR_NOTCL] No Gcode in the object..."
msgstr "[ERROR_NOTCL] No Gcode in the object..."

#: flatcamTools/ToolSolderPaste.py:1327
#, python-format
msgid "[ERROR] ToolSolderPaste.on_view_gcode() -->%s"
msgstr "[ERROR] ToolSolderPaste.on_view_gcode() -->%s"

#: flatcamTools/ToolSolderPaste.py:1356
msgid "Export GCode ..."
msgstr "Export GCode ..."

#: flatcamTools/ToolSolderPaste.py:1396
#, python-format
msgid "[success] Solder paste dispenser GCode file saved to: %s"
msgstr "[success] Solder paste dispenser GCode file saved to: %s"

#: flatcamTools/ToolSub.py:55
msgid "<b>Gerber Objects</b>"
msgstr "<b>Gerber Objects</b>"

#: flatcamTools/ToolSub.py:64 flatcamTools/ToolSub.py:110
msgid "Target:"
msgstr "Target:"

#: flatcamTools/ToolSub.py:66
msgid ""
"Gerber object from which to substract\n"
"the substractor Gerber object."
msgstr ""
"Gerber object from which to substract\n"
"the substractor Gerber object."

#: flatcamTools/ToolSub.py:78 flatcamTools/ToolSub.py:124
msgid "Substractor:"
msgstr "Substractor:"

#: flatcamTools/ToolSub.py:80
msgid ""
"Gerber object that will be substracted\n"
"from the target Gerber object."
msgstr ""
"Gerber object that will be substracted\n"
"from the target Gerber object."

#: flatcamTools/ToolSub.py:87
msgid "Substract Gerber"
msgstr "Substract Gerber"

#: flatcamTools/ToolSub.py:89
msgid ""
"Will remove the area occupied by the substractor\n"
"Gerber from the Target Gerber.\n"
"Can be used to remove the overlapping silkscreen\n"
"over the soldermask."
msgstr ""
"Will remove the area occupied by the substractor\n"
"Gerber from the Target Gerber.\n"
"Can be used to remove the overlapping silkscreen\n"
"over the soldermask."

#: flatcamTools/ToolSub.py:101
msgid "<b>Geometry Objects</b>"
msgstr "<b>Geometry Objects</b>"

#: flatcamTools/ToolSub.py:112
msgid ""
"Geometry object from which to substract\n"
"the substractor Geometry object."
msgstr ""
"Geometry object from which to substract\n"
"the substractor Geometry object."

#: flatcamTools/ToolSub.py:126
msgid ""
"Geometry object that will be substracted\n"
"from the target Geometry object."
msgstr ""
"Geometry object that will be substracted\n"
"from the target Geometry object."

#: flatcamTools/ToolSub.py:133
msgid "Substract Geometry"
msgstr "Substract Geometry"

#: flatcamTools/ToolSub.py:135
msgid ""
"Will remove the area occupied by the substractor\n"
"Geometry from the Target Geometry."
msgstr ""
"Will remove the area occupied by the substractor\n"
"Geometry from the Target Geometry."

#: flatcamTools/ToolSub.py:215
msgid "Sub Tool"
msgstr "Sub Tool"

#: flatcamTools/ToolSub.py:230 flatcamTools/ToolSub.py:421
msgid "[ERROR_NOTCL] No Target object loaded."
msgstr "[ERROR_NOTCL] No Target object loaded."

#: flatcamTools/ToolSub.py:242 flatcamTools/ToolSub.py:433
msgid "[ERROR_NOTCL] No Substractor object loaded."
msgstr "[ERROR_NOTCL] No Substractor object loaded."

#: flatcamTools/ToolSub.py:294
#, python-format
msgid "Parsing aperture %s geometry ..."
msgstr "Parsing aperture %s geometry ..."

#: flatcamTools/ToolSub.py:396 flatcamTools/ToolSub.py:539
msgid "Generating new object ..."
msgstr "Generating new object ..."

#: flatcamTools/ToolSub.py:399 flatcamTools/ToolSub.py:542
msgid "[ERROR_NOTCL] Generating new object failed."
msgstr "[ERROR_NOTCL] Generating new object failed."

#: flatcamTools/ToolSub.py:403 flatcamTools/ToolSub.py:547
#, python-format
msgid "[success] Created: %s"
msgstr "[success] Created: %s"

#: flatcamTools/ToolSub.py:444
msgid ""
"[ERROR_NOTCL] Currently, the Substractor geometry cannot be of type Multigeo."
msgstr ""
"[ERROR_NOTCL] Currently, the Substractor geometry cannot be of type Multigeo."

#: flatcamTools/ToolSub.py:489
msgid "Parsing solid_geometry ..."
msgstr "Parsing solid_geometry ..."

#: flatcamTools/ToolSub.py:491
#, python-format
msgid "Parsing tool %s geometry ..."
msgstr "Parsing tool %s geometry ..."

#: flatcamTools/ToolTransform.py:23
msgid "Object Transform"
msgstr "Object Transform"

#: flatcamTools/ToolTransform.py:84
msgid ""
"Rotate the selected object(s).\n"
"The point of reference is the middle of\n"
"the bounding box for all selected objects."
msgstr ""
"Rotate the selected object(s).\n"
"The point of reference is the middle of\n"
"the bounding box for all selected objects."

#: flatcamTools/ToolTransform.py:120 flatcamTools/ToolTransform.py:138
msgid ""
"Skew/shear the selected object(s).\n"
"The point of reference is the middle of\n"
"the bounding box for all selected objects."
msgstr ""
"Skew/shear the selected object(s).\n"
"The point of reference is the middle of\n"
"the bounding box for all selected objects."

#: flatcamTools/ToolTransform.py:176 flatcamTools/ToolTransform.py:193
msgid ""
"Scale the selected object(s).\n"
"The point of reference depends on \n"
"the Scale reference checkbox state."
msgstr ""
"Scale the selected object(s).\n"
"The point of reference depends on \n"
"the Scale reference checkbox state."

#: flatcamTools/ToolTransform.py:202
msgid ""
"Scale the selected object(s)\n"
"using the Scale Factor X for both axis."
msgstr ""
"Scale the selected object(s)\n"
"using the Scale Factor X for both axis."

#: flatcamTools/ToolTransform.py:250 flatcamTools/ToolTransform.py:267
msgid ""
"Offset the selected object(s).\n"
"The point of reference is the middle of\n"
"the bounding box for all selected objects.\n"
msgstr ""
"Offset the selected object(s).\n"
"The point of reference is the middle of\n"
"the bounding box for all selected objects.\n"

#: flatcamTools/ToolTransform.py:297 flatcamTools/ToolTransform.py:305
msgid ""
"Flip the selected object(s) over the X axis.\n"
"Does not create a new object.\n"
" "
msgstr ""
"Flip the selected object(s) over the X axis.\n"
"Does not create a new object.\n"
" "

#: flatcamTools/ToolTransform.py:637
msgid "[WARNING_NOTCL] No object selected. Please Select an object to rotate!"
msgstr "[WARNING_NOTCL] No object selected. Please Select an object to rotate!"

#: flatcamTools/ToolTransform.py:665
msgid "CNCJob objects can't be rotated."
msgstr "CNCJob objects can't be rotated."

#: flatcamTools/ToolTransform.py:673
msgid "[success] Rotate done ..."
msgstr "[success] Rotate done ..."

#: flatcamTools/ToolTransform.py:688
msgid "[WARNING_NOTCL] No object selected. Please Select an object to flip!"
msgstr "[WARNING_NOTCL] No object selected. Please Select an object to flip!"

#: flatcamTools/ToolTransform.py:723
msgid "CNCJob objects can't be mirrored/flipped."
msgstr "CNCJob objects can't be mirrored/flipped."

#: flatcamTools/ToolTransform.py:757
msgid ""
"[WARNING_NOTCL] No object selected. Please Select an object to shear/skew!"
msgstr ""
"[WARNING_NOTCL] No object selected. Please Select an object to shear/skew!"

#: flatcamTools/ToolTransform.py:779
msgid "CNCJob objects can't be skewed."
msgstr "CNCJob objects can't be skewed."

#: flatcamTools/ToolTransform.py:806
msgid "[WARNING_NOTCL] No object selected. Please Select an object to scale!"
msgstr "[WARNING_NOTCL] No object selected. Please Select an object to scale!"

#: flatcamTools/ToolTransform.py:839
msgid "CNCJob objects can't be scaled."
msgstr "CNCJob objects can't be scaled."

#: flatcamTools/ToolTransform.py:858
msgid "[WARNING_NOTCL] No object selected. Please Select an object to offset!"
msgstr "[WARNING_NOTCL] No object selected. Please Select an object to offset!"

#: flatcamTools/ToolTransform.py:867
msgid "CNCJob objects can't be offseted."
msgstr "CNCJob objects can't be offseted."

#~ msgid "Disable"
#~ msgstr "Disable"

#~ msgid "[WARNING_NOTCL] Move cancelled. No shape selected."
#~ msgstr "[WARNING_NOTCL] Move cancelled. No shape selected."

#~ msgid "Click on the Destination point..."
#~ msgstr "Click on the Destination point..."

#~ msgid "Copy as &Geom"
#~ msgstr "Copy as &Geom"

#~ msgid "Ap. Scale Factor:"
#~ msgstr "Ap. Scale Factor:"

#~ msgid ""
#~ "Change the size of the selected apertures.\n"
#~ "Factor by which to multiply\n"
#~ "geometric features of this object."
#~ msgstr ""
#~ "Change the size of the selected apertures.\n"
#~ "Factor by which to multiply\n"
#~ "geometric features of this object."

#~ msgid "Ap. Buffer Factor:"
#~ msgstr "Ap. Buffer Factor:"

#~ msgid ""
#~ "Change the size of the selected apertures.\n"
#~ "Factor by which to expand/shrink\n"
#~ "geometric features of this object."
#~ msgstr ""
#~ "Change the size of the selected apertures.\n"
#~ "Factor by which to expand/shrink\n"
#~ "geometric features of this object."

#~ msgid "[WARNING]No object Box. Using instead %s"
#~ msgstr "[WARNING]No object Box. Using instead %s"

#~ msgid "Path"
#~ msgstr "Path"

#~ msgid "In"
#~ msgstr "In"

#~ msgid "Out"
#~ msgstr "Out"

#~ msgid "Custom"
#~ msgstr "Custom"

#~ msgid "Angle"
#~ msgstr "Angle"

#~ msgid "Standard"
#~ msgstr "Standard"

#~ msgid "Seed-based"
#~ msgstr "Seed-based"

#~ msgid "Straight lines"
#~ msgstr "Straight lines"

#~ msgid "Copy Drill(s)"
#~ msgstr "Copy Drill(s)"

#~ msgid "Basic"
#~ msgstr "Basic"

#~ msgid "Advanced"
#~ msgstr "Advanced"

#~ msgid "MMB"
#~ msgstr "MMB"

#~ msgid "RMB"
#~ msgstr "RMB"

#~ msgid "CTRL"
#~ msgstr "CTRL"

#~ msgid "SHIFT"
#~ msgstr "SHIFT"

#~ msgid "Climb"
#~ msgstr "Climb"

#~ msgid "Conv."
#~ msgstr "Conv."

#~ msgid "LZ"
#~ msgstr "LZ"

#~ msgid "TZ"
#~ msgstr "TZ"

#~ msgid "INCH"
#~ msgstr "INCH"

#~ msgid "MM"
#~ msgstr "MM"

#~ msgid "MH"
#~ msgstr "MH"

#~ msgid "Both"
#~ msgstr "Both"

#~ msgid "Decimal"
#~ msgstr "Decimal"

#~ msgid "No-Decimal"
#~ msgstr "No-Decimal"

#~ msgid "Travel"
#~ msgstr "Travel"

#~ msgid "X"
#~ msgstr "X"

#~ msgid "Y"
#~ msgstr "Y"

#~ msgid "Point"
#~ msgstr "Point"

#~ msgid "Box"
#~ msgstr "Box"

#~ msgid "Single"
#~ msgstr "Single"

#~ msgid "Pos"
#~ msgstr "Pos"

#~ msgid "Neg"
#~ msgstr "Neg"

#~ msgid "Gerber"
#~ msgstr "Gerber"

#~ msgid "Geo"
#~ msgstr "Geo"

#~ msgid "Solid   "
#~ msgstr "Solid   "

#~ msgid "M-Color   "
#~ msgstr "M-Color   "

#~ msgid "Done."
#~ msgstr "Done."

#~ msgid "Click on CENTER ..."
#~ msgstr "Click on CENTER ..."

#~ msgid "[success] Done. Region completed."
#~ msgstr "[success] Done. Region completed."

#~ msgid "Add an aperture to the aperture list"
#~ msgstr "Add an aperture to the aperture list"

#~ msgid "Go"
#~ msgstr "Go"

#~ msgid "Del Aperture:"
#~ msgstr "Del Aperture:"

#~ msgid ""
#~ "Delete a aperture in the aperture list.\n"
#~ "It will delete also the associated geometry."
#~ msgstr ""
#~ "Delete a aperture in the aperture list.\n"
#~ "It will delete also the associated geometry."

#~ msgid "Save && Close Edit"
#~ msgstr "Save && Close Edit"

#~ msgid ""
#~ "<b>Editor Shortcut list</b><br>\n"
#~ "            <br>\n"
#~ "            <strong><span style=\"color:#0000ff\">GEOMETRY EDITOR</span></"
#~ "strong><br>\n"
#~ "    \n"
#~ "            <table border=\"0\" cellpadding=\"0\" cellspacing=\"0\" style="
#~ "\"width:283px\">\n"
#~ "                <tbody>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\" width=\"89\"><strong>A</"
#~ "strong></td>\n"
#~ "                        <td width=\"194\">&nbsp;Draw an Arc</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>B</strong></td>\n"
#~ "                        <td>&nbsp;Buffer Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>C</strong></td>\n"
#~ "                        <td>&nbsp;Copy Geo Item</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>E</strong></td>\n"
#~ "                        <td>&nbsp;Polygon Intersection Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>I</strong></td>\n"
#~ "                        <td>&nbsp;Paint Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>J</strong></td>\n"
#~ "                        <td>&nbsp;Jump to Location (x, y)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>K</strong></td>\n"
#~ "                        <td>&nbsp;Toggle Corner Snap</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>M</strong></td>\n"
#~ "                        <td>&nbsp;Move Geo Item</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>N</strong></td>\n"
#~ "                        <td>&nbsp;Draw a Polygon</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>O</strong></td>\n"
#~ "                        <td>&nbsp;Draw a Circle</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>P</strong></td>\n"
#~ "                        <td>&nbsp;Draw a Path</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>R</strong></td>\n"
#~ "                        <td>&nbsp;Draw Rectangle</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>S</strong></td>\n"
#~ "                        <td>&nbsp;Polygon Substraction Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>T</strong></td>\n"
#~ "                        <td>&nbsp;Add Text Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>U</strong></td>\n"
#~ "                        <td>&nbsp;Polygon Union Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>X</strong></td>\n"
#~ "                        <td>&nbsp;Flip shape on X axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Y</strong></td>\n"
#~ "                        <td>&nbsp;Flip shape on Y axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>SHIFT+X</strong></td>\n"
#~ "                        <td>&nbsp;Skew shape on X axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>SHIFT+Y</strong></td>\n"
#~ "                        <td>&nbsp;Skew shape on Y axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+R</strong></td>\n"
#~ "                        <td>&nbsp;Editor Transformation Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+X</strong></td>\n"
#~ "                        <td>&nbsp;Offset shape on X axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+Y</strong></td>\n"
#~ "                        <td>&nbsp;Offset shape on Y axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>CTRL+M</strong></td>\n"
#~ "                        <td>&nbsp;Measurement Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>CTRL+S</strong></td>\n"
#~ "                        <td>&nbsp;Save Object and Exit Editor</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>CTRL+X</strong></td>\n"
#~ "                        <td>&nbsp;Polygon Cut Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Space</strong></td>\n"
#~ "                        <td>&nbsp;Rotate Geometry</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ENTER</strong></td>\n"
#~ "                        <td>&nbsp;Finish drawing for certain tools</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ESC</strong></td>\n"
#~ "                        <td>&nbsp;Abort and return to Select</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Del</strong></td>\n"
#~ "                        <td>&nbsp;Delete Shape</td>\n"
#~ "                    </tr>\n"
#~ "                </tbody>\n"
#~ "            </table>\n"
#~ "            <br>\n"
#~ "            <br>\n"
#~ "            <strong><span style=\"color:#ff0000\">EXCELLON EDITOR</span></"
#~ "strong><br>\n"
#~ "            <table border=\"0\" cellpadding=\"0\" cellspacing=\"0\" style="
#~ "\"width:283px\">\n"
#~ "                <tbody>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\" width=\"89\"><strong>A</"
#~ "strong></td>\n"
#~ "                        <td width=\"194\">&nbsp;Add Drill Array</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>C</strong></td>\n"
#~ "                        <td>&nbsp;Copy Drill(s)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>D</strong></td>\n"
#~ "                        <td>&nbsp;Add Drill</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>J</strong></td>\n"
#~ "                        <td>&nbsp;Jump to Location (x, y)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>M</strong></td>\n"
#~ "                        <td>&nbsp;Move Drill(s)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>R</strong></td>\n"
#~ "                        <td>&nbsp;Resize Drill(s)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>T</strong></td>\n"
#~ "                        <td>&nbsp;Add a new Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Del</strong></td>\n"
#~ "                        <td>&nbsp;Delete Drill(s)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Del</strong></td>\n"
#~ "                        <td>&nbsp;Alternate: Delete Tool(s)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ESC</strong></td>\n"
#~ "                        <td>&nbsp;Abort and return to Select</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>CTRL+S</strong></td>\n"
#~ "                        <td>&nbsp;Save Object and Exit Editor</td>\n"
#~ "                    </tr>\n"
#~ "                </tbody>\n"
#~ "            </table>\n"
#~ "                    "
#~ msgstr ""
#~ "<b>Editor Shortcut list</b><br>\n"
#~ "            <br>\n"
#~ "            <strong><span style=\"color:#0000ff\">GEOMETRY EDITOR</span></"
#~ "strong><br>\n"
#~ "    \n"
#~ "            <table border=\"0\" cellpadding=\"0\" cellspacing=\"0\" style="
#~ "\"width:283px\">\n"
#~ "                <tbody>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\" width=\"89\"><strong>A</"
#~ "strong></td>\n"
#~ "                        <td width=\"194\">&nbsp;Draw an Arc</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>B</strong></td>\n"
#~ "                        <td>&nbsp;Buffer Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>C</strong></td>\n"
#~ "                        <td>&nbsp;Copy Geo Item</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>E</strong></td>\n"
#~ "                        <td>&nbsp;Polygon Intersection Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>I</strong></td>\n"
#~ "                        <td>&nbsp;Paint Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>J</strong></td>\n"
#~ "                        <td>&nbsp;Jump to Location (x, y)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>K</strong></td>\n"
#~ "                        <td>&nbsp;Toggle Corner Snap</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>M</strong></td>\n"
#~ "                        <td>&nbsp;Move Geo Item</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>N</strong></td>\n"
#~ "                        <td>&nbsp;Draw a Polygon</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>O</strong></td>\n"
#~ "                        <td>&nbsp;Draw a Circle</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>P</strong></td>\n"
#~ "                        <td>&nbsp;Draw a Path</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>R</strong></td>\n"
#~ "                        <td>&nbsp;Draw Rectangle</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>S</strong></td>\n"
#~ "                        <td>&nbsp;Polygon Substraction Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>T</strong></td>\n"
#~ "                        <td>&nbsp;Add Text Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>U</strong></td>\n"
#~ "                        <td>&nbsp;Polygon Union Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>X</strong></td>\n"
#~ "                        <td>&nbsp;Flip shape on X axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Y</strong></td>\n"
#~ "                        <td>&nbsp;Flip shape on Y axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>SHIFT+X</strong></td>\n"
#~ "                        <td>&nbsp;Skew shape on X axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>SHIFT+Y</strong></td>\n"
#~ "                        <td>&nbsp;Skew shape on Y axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+R</strong></td>\n"
#~ "                        <td>&nbsp;Editor Transformation Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+X</strong></td>\n"
#~ "                        <td>&nbsp;Offset shape on X axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+Y</strong></td>\n"
#~ "                        <td>&nbsp;Offset shape on Y axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>CTRL+M</strong></td>\n"
#~ "                        <td>&nbsp;Measurement Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>CTRL+S</strong></td>\n"
#~ "                        <td>&nbsp;Save Object and Exit Editor</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>CTRL+X</strong></td>\n"
#~ "                        <td>&nbsp;Polygon Cut Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Space</strong></td>\n"
#~ "                        <td>&nbsp;Rotate Geometry</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ENTER</strong></td>\n"
#~ "                        <td>&nbsp;Finish drawing for certain tools</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ESC</strong></td>\n"
#~ "                        <td>&nbsp;Abort and return to Select</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Del</strong></td>\n"
#~ "                        <td>&nbsp;Delete Shape</td>\n"
#~ "                    </tr>\n"
#~ "                </tbody>\n"
#~ "            </table>\n"
#~ "            <br>\n"
#~ "            <br>\n"
#~ "            <strong><span style=\"color:#ff0000\">EXCELLON EDITOR</span></"
#~ "strong><br>\n"
#~ "            <table border=\"0\" cellpadding=\"0\" cellspacing=\"0\" style="
#~ "\"width:283px\">\n"
#~ "                <tbody>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\" width=\"89\"><strong>A</"
#~ "strong></td>\n"
#~ "                        <td width=\"194\">&nbsp;Add Drill Array</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>C</strong></td>\n"
#~ "                        <td>&nbsp;Copy Drill(s)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>D</strong></td>\n"
#~ "                        <td>&nbsp;Add Drill</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>J</strong></td>\n"
#~ "                        <td>&nbsp;Jump to Location (x, y)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>M</strong></td>\n"
#~ "                        <td>&nbsp;Move Drill(s)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>R</strong></td>\n"
#~ "                        <td>&nbsp;Resize Drill(s)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>T</strong></td>\n"
#~ "                        <td>&nbsp;Add a new Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Del</strong></td>\n"
#~ "                        <td>&nbsp;Delete Drill(s)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Del</strong></td>\n"
#~ "                        <td>&nbsp;Alternate: Delete Tool(s)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ESC</strong></td>\n"
#~ "                        <td>&nbsp;Abort and return to Select</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>CTRL+S</strong></td>\n"
#~ "                        <td>&nbsp;Save Object and Exit Editor</td>\n"
#~ "                    </tr>\n"
#~ "                </tbody>\n"
#~ "            </table>\n"
#~ "                    "

#~ msgid "[ERROR_NOTCL]Could not load defaults file."
#~ msgstr "[ERROR_NOTCL]Could not load defaults file."

#~ msgid "[ERROR_NOTCL] Failed to parse project file: %s"
#~ msgstr "[ERROR_NOTCL] Failed to parse project file: %s"

#~ msgid "[ERROR_NOTCL]Wrong value format entered, use a number."
#~ msgstr "[ERROR_NOTCL]Wrong value format entered, use a number."

#~ msgid ""
#~ "[ERROR_NOTCL] The aperture scale factor value is missing or wrong format."
#~ msgstr ""
#~ "[ERROR_NOTCL] The aperture scale factor value is missing or wrong format."

#~ msgid "[ERROR_NOTCL] The aperture buffer value is missing or wrong format."
#~ msgstr "[ERROR_NOTCL] The aperture buffer value is missing or wrong format."

#~ msgid "[ERROR_NOTCL]Cancelled. Empty file, it has no geometry..."
#~ msgstr "[ERROR_NOTCL]Cancelled. Empty file, it has no geometry..."

#~ msgid "[WARNING_NOTCL]Export Machine Code cancelled ..."
#~ msgstr "[WARNING_NOTCL]Export Machine Code cancelled ..."

#~ msgid "[success] GUI settings deleted ..."
#~ msgstr "[success] GUI settings deleted ..."

#~ msgid "Scale Factor:"
#~ msgstr "Scale Factor:"

#~ msgid "Buffer Factor:"
#~ msgstr "Buffer Factor:"

#~ msgid "<b>Generate new Gerber Object:</b>"
#~ msgstr "<b>Generate new Gerber Object:</b>"

#~ msgid "Will generate a new Gerber object from the changed apertures."
#~ msgstr "Will generate a new Gerber object from the changed apertures."

#~ msgid ""
#~ "Will generate a new Gerber object from the changed apertures.\n"
#~ "This new object can then be isolated etc."
#~ msgstr ""
#~ "Will generate a new Gerber object from the changed apertures.\n"
#~ "This new object can then be isolated etc."

#~ msgid "[success]Flip on the Y axis done ..."
#~ msgstr "[success]Flip on the Y axis done ..."

#~ msgid "[success]Flip on the X axis done ..."
#~ msgstr "[success]Flip on the X axis done ..."

#~ msgid "[success]Skew on the %s axis done ..."
#~ msgstr "[success]Skew on the %s axis done ..."

#~ msgid "[success]Offset on the %s axis done ..."
#~ msgstr "[success]Offset on the %s axis done ..."

#~ msgid ""
#~ "How much (fraction) of the tool width to overlap each tool pass.\n"
#~ "Example:\n"
#~ "A value here of 0.25 means 25\\% from the tool diameter found above.\n"
#~ "\n"
#~ "Adjust the value starting with lower values\n"
#~ "and increasing it if areas that should be painted are still \n"
#~ "not painted.\n"
#~ "Lower values = faster processing, faster execution on PCB.\n"
#~ "Higher values = slow processing and slow execution on CNC\n"
#~ "due of too many paths."
#~ msgstr ""
#~ "How much (fraction) of the tool width to overlap each tool pass.\n"
#~ "Example:\n"
#~ "A value here of 0.25 means 25\\% from the tool diameter found above.\n"
#~ "\n"
#~ "Adjust the value starting with lower values\n"
#~ "and increasing it if areas that should be painted are still \n"
#~ "not painted.\n"
#~ "Lower values = faster processing, faster execution on PCB.\n"
#~ "Higher values = slow processing and slow execution on CNC\n"
#~ "due of too many paths."

#~| msgid "z_toolchange = Z coord for Toolchange"
#~ msgid "z_cut = Z coord for Toolchange"
#~ msgstr "z_cut = Z coord for Toolchange"

#~| msgid "z_toolchange = Z coord for Toolchange"
#~ msgid "z_move = Z coord for Toolchange"
#~ msgstr "z_move = Z coord for Toolchange"

#~ msgid "%s/Project_%s"
#~ msgstr "%s/Project_%s"

#~ msgid "tool_tab"
#~ msgstr "tool_tab"