FlatCAM/locale/en/LC_MESSAGES/strings.po

# SOME DESCRIPTIVE TITLE.
# Copyright (C) YEAR ORGANIZATION
# FIRST AUTHOR <EMAIL@ADDRESS>, YEAR.
#
msgid ""
msgstr ""
"Project-Id-Version: \n"
"POT-Creation-Date: 2019-06-22 23:56+0300\n"
"PO-Revision-Date: 2019-06-22 23:56+0300\n"
"Last-Translator: \n"
"Language-Team: \n"
"Language: en\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Generated-By: pygettext.py 1.5\n"
"X-Generator: Poedit 2.2.1\n"
"Plural-Forms: nplurals=2; plural=(n != 1);\n"
"X-Poedit-Basepath: ../../..\n"
"X-Poedit-SearchPath-0: .\n"
"X-Poedit-SearchPathExcluded-0: build\n"
"X-Poedit-SearchPathExcluded-1: doc\n"
"X-Poedit-SearchPathExcluded-2: tests\n"

#: FlatCAMApp.py:925
msgid "[ERROR] Could not find the Language files. The App strings are missing."
msgstr ""
"[ERROR] Could not find the Language files. The App strings are missing."

#: FlatCAMApp.py:2018 ObjectCollection.py:80 flatcamTools/ToolImage.py:213
#: flatcamTools/ToolPcbWizard.py:299 flatcamTools/ToolPcbWizard.py:322
msgid "Open cancelled."
msgstr "Open cancelled."

#: FlatCAMApp.py:2032
msgid "Open Config file failed."
msgstr "Open Config file failed."

#: FlatCAMApp.py:2046
msgid "Open Script file failed."
msgstr "Open Script file failed."

#: FlatCAMApp.py:2244
msgid "[WARNING_NOTCL] Select a Geometry, Gerber or Excellon Object to edit."
msgstr "[WARNING_NOTCL] Select a Geometry, Gerber or Excellon Object to edit."

#: FlatCAMApp.py:2254
msgid ""
"[WARNING_NOTCL] Simultanoeus editing of tools geometry in a MultiGeo "
"Geometry is not possible.\n"
"Edit only one geometry at a time."
msgstr ""
"[WARNING_NOTCL] Simultanoeus editing of tools geometry in a MultiGeo "
"Geometry is not possible.\n"
"Edit only one geometry at a time."

#: FlatCAMApp.py:2309
msgid "[WARNING_NOTCL] Editor is activated ..."
msgstr "[WARNING_NOTCL] Editor is activated ..."

#: FlatCAMApp.py:2327
msgid "Do you want to save the edited object?"
msgstr "Do you want to save the edited object?"

#: FlatCAMApp.py:2328 flatcamGUI/FlatCAMGUI.py:1618
msgid "Close Editor"
msgstr "Close Editor"

#: FlatCAMApp.py:2331 FlatCAMApp.py:3423 FlatCAMApp.py:5989
#: FlatCAMTranslation.py:89 flatcamGUI/FlatCAMGUI.py:3730
msgid "Yes"
msgstr "Yes"

#: FlatCAMApp.py:2332 FlatCAMApp.py:3424 FlatCAMApp.py:5990
#: FlatCAMTranslation.py:90 flatcamGUI/FlatCAMGUI.py:3731
msgid "No"
msgstr "No"

#: FlatCAMApp.py:2333 FlatCAMApp.py:3425 FlatCAMApp.py:3836 FlatCAMApp.py:5991
msgid "Cancel"
msgstr "Cancel"

#: FlatCAMApp.py:2360
msgid "[WARNING] Object empty after edit."
msgstr "[WARNING] Object empty after edit."

#: FlatCAMApp.py:2382 FlatCAMApp.py:2401 FlatCAMApp.py:2413
msgid "[WARNING_NOTCL] Select a Gerber, Geometry or Excellon Object to update."
msgstr ""
"[WARNING_NOTCL] Select a Gerber, Geometry or Excellon Object to update."

#: FlatCAMApp.py:2385
#, python-format
msgid "[selected] %s is updated, returning to App..."
msgstr "[selected] %s is updated, returning to App..."

#: FlatCAMApp.py:2750
msgid "[ERROR] Could not load defaults file."
msgstr "[ERROR] Could not load defaults file."

#: FlatCAMApp.py:2762
msgid "[ERROR] Failed to parse defaults file."
msgstr "[ERROR] Failed to parse defaults file."

#: FlatCAMApp.py:2783 FlatCAMApp.py:2787
msgid "Import FlatCAM Preferences"
msgstr "Import FlatCAM Preferences"

#: FlatCAMApp.py:2793
msgid "[WARNING_NOTCL] FlatCAM preferences import cancelled."
msgstr "[WARNING_NOTCL] FlatCAM preferences import cancelled."

#: FlatCAMApp.py:2801 FlatCAMApp.py:2855 FlatCAMApp.py:3302
msgid "[ERROR_NOTCL] Could not load defaults file."
msgstr "[ERROR_NOTCL] Could not load defaults file."

#: FlatCAMApp.py:2809 FlatCAMApp.py:3311
msgid "[ERROR_NOTCL] Failed to parse defaults file."
msgstr "[ERROR_NOTCL] Failed to parse defaults file."

#: FlatCAMApp.py:2812
#, python-format
msgid "[success] Imported Defaults from %s"
msgstr "[success] Imported Defaults from %s"

#: FlatCAMApp.py:2827 FlatCAMApp.py:2832
msgid "Export FlatCAM Preferences"
msgstr "Export FlatCAM Preferences"

#: FlatCAMApp.py:2839
msgid "[WARNING_NOTCL] FlatCAM preferences export cancelled."
msgstr "[WARNING_NOTCL] FlatCAM preferences export cancelled."

#: FlatCAMApp.py:2874 FlatCAMApp.py:3356
msgid "[ERROR_NOTCL] Failed to write defaults to file."
msgstr "[ERROR_NOTCL] Failed to write defaults to file."

#: FlatCAMApp.py:2927
msgid "[ERROR_NOTCL] Failed to open recent files file for writing."
msgstr "[ERROR_NOTCL] Failed to open recent files file for writing."

#: FlatCAMApp.py:3004 camlib.py:4457
msgid "[ERROR_NOTCL] An internal error has ocurred. See shell.\n"
msgstr "[ERROR_NOTCL] An internal error has ocurred. See shell.\n"

#: FlatCAMApp.py:3005
#, python-brace-format
msgid ""
"Object ({kind}) failed because: {error} \n"
"\n"
msgstr ""
"Object ({kind}) failed because: {error} \n"
"\n"

#: FlatCAMApp.py:3025
msgid "Converting units to "
msgstr "Converting units to "

#: FlatCAMApp.py:3104 FlatCAMApp.py:3107 FlatCAMApp.py:3110 FlatCAMApp.py:3113
#, python-brace-format
msgid ""
"[selected] {kind} created/selected: <span style=\"color:{color};\">{name}</"
"span>"
msgstr ""
"[selected] {kind} created/selected: <span style=\"color:{color};\">{name}</"
"span>"

#: FlatCAMApp.py:3207
#, python-brace-format
msgid ""
"<font size=8><B>FlatCAM</B></font><BR>Version {version} {beta} ({date}) - "
"{arch} <BR><BR>2D Computer-Aided Printed Circuit Board<BR>Manufacturing."
"<BR><BR>(c) 2014-2019 <B>Juan Pablo Caram</B><BR><BR><B> Main Contributors:</"
"B><BR>Denis Hayrullin<BR>Kamil Sopko<BR>Marius Stanciu<BR>Matthieu "
"Berthomé<BR>and many others found <a href = \"https://bitbucket.org/jpcgt/"
"flatcam/pull-requests/?state=MERGED\">here.</a><BR><BR>Development is done "
"<a href = \"https://bitbucket.org/jpcgt/flatcam/src/Beta/\">here.</"
"a><BR>DOWNLOAD area <a href = \"https://bitbucket.org/jpcgt/flatcam/"
"downloads/\">here.</a><BR>"
msgstr ""
"<font size=8><B>FlatCAM</B></font><BR>Version {version} {beta} ({date}) - "
"{arch} <BR><BR>2D Computer-Aided Printed Circuit Board<BR>Manufacturing."
"<BR><BR>(c) 2014-2019 <B>Juan Pablo Caram</B><BR><BR><B> Main Contributors:</"
"B><BR>Denis Hayrullin<BR>Kamil Sopko<BR>Marius Stanciu<BR>Matthieu "
"Berthomé<BR>and many others found <a href = \"https://bitbucket.org/jpcgt/"
"flatcam/pull-requests/?state=MERGED\">here.</a><BR><BR>Development is done "
"<a href = \"https://bitbucket.org/jpcgt/flatcam/src/Beta/\">here.</"
"a><BR>DOWNLOAD area <a href = \"https://bitbucket.org/jpcgt/flatcam/"
"downloads/\">here.</a><BR>"

#: FlatCAMApp.py:3360
msgid "[success] Defaults saved."
msgstr "[success] Defaults saved."

#: FlatCAMApp.py:3381
msgid "[ERROR_NOTCL] Could not load factory defaults file."
msgstr "[ERROR_NOTCL] Could not load factory defaults file."

#: FlatCAMApp.py:3390
msgid "[ERROR_NOTCL] Failed to parse factory defaults file."
msgstr "[ERROR_NOTCL] Failed to parse factory defaults file."

#: FlatCAMApp.py:3404
msgid "[ERROR_NOTCL] Failed to write factory defaults to file."
msgstr "[ERROR_NOTCL] Failed to write factory defaults to file."

#: FlatCAMApp.py:3408
msgid "Factory defaults saved."
msgstr "Factory defaults saved."

#: FlatCAMApp.py:3413 flatcamGUI/FlatCAMGUI.py:3106
msgid "[WARNING_NOTCL] Application is saving the project. Please wait ..."
msgstr "[WARNING_NOTCL] Application is saving the project. Please wait ..."

#: FlatCAMApp.py:3418
msgid ""
"There are files/objects modified in FlatCAM. \n"
"Do you want to Save the project?"
msgstr ""
"There are files/objects modified in FlatCAM. \n"
"Do you want to Save the project?"

#: FlatCAMApp.py:3421 FlatCAMApp.py:5987
msgid "Save changes"
msgstr "Save changes"

#: FlatCAMApp.py:3488
msgid ""
"[ERROR] Failed join. The Geometry objects are of different types.\n"
"At least one is MultiGeo type and the other is SingleGeo type. A possibility "
"is to convert from one to another and retry joining \n"
"but in the case of converting from MultiGeo to SingleGeo, informations may "
"be lost and the result may not be what was expected. \n"
"Check the generated GCODE."
msgstr ""
"[ERROR] Failed join. The Geometry objects are of different types.\n"
"At least one is MultiGeo type and the other is SingleGeo type. A possibility "
"is to convert from one to another and retry joining \n"
"but in the case of converting from MultiGeo to SingleGeo, informations may "
"be lost and the result may not be what was expected. \n"
"Check the generated GCODE."

#: FlatCAMApp.py:3529
msgid "[ERROR_NOTCL] Failed. Excellon joining works only on Excellon objects."
msgstr "[ERROR_NOTCL] Failed. Excellon joining works only on Excellon objects."

#: FlatCAMApp.py:3551
msgid "[ERROR_NOTCL] Failed. Gerber joining works only on Gerber objects."
msgstr "[ERROR_NOTCL] Failed. Gerber joining works only on Gerber objects."

#: FlatCAMApp.py:3566 FlatCAMApp.py:3591
msgid "[ERROR_NOTCL] Failed. Select a Geometry Object and try again."
msgstr "[ERROR_NOTCL] Failed. Select a Geometry Object and try again."

#: FlatCAMApp.py:3570 FlatCAMApp.py:3595
#, python-format
msgid "[ERROR_NOTCL] Expected a FlatCAMGeometry, got %s"
msgstr "[ERROR_NOTCL] Expected a FlatCAMGeometry, got %s"

#: FlatCAMApp.py:3583
msgid "[success] A Geometry object was converted to MultiGeo type."
msgstr "[success] A Geometry object was converted to MultiGeo type."

#: FlatCAMApp.py:3609
msgid "[success] A Geometry object was converted to SingleGeo type."
msgstr "[success] A Geometry object was converted to SingleGeo type."

#: FlatCAMApp.py:3835 FlatCAMApp.py:4674 FlatCAMApp.py:6262 FlatCAMApp.py:6273
#: FlatCAMApp.py:6513 FlatCAMApp.py:6523
msgid "Ok"
msgstr "Ok"

#: FlatCAMApp.py:3880
#, python-format
msgid "[success] Converted units to %s"
msgstr "[success] Converted units to %s"

#: FlatCAMApp.py:3891
msgid "[WARNING_NOTCL] Units conversion cancelled."
msgstr "[WARNING_NOTCL] Units conversion cancelled."

#: FlatCAMApp.py:4543
msgid "Open file"
msgstr "Open file"

#: FlatCAMApp.py:4574 FlatCAMApp.py:4579
msgid "Export G-Code ..."
msgstr "Export G-Code ..."

#: FlatCAMApp.py:4582
msgid "[WARNING_NOTCL] Export Code cancelled."
msgstr "[WARNING_NOTCL] Export Code cancelled."

#: FlatCAMApp.py:4592
msgid "[WARNING] No such file or directory"
msgstr "[WARNING] No such file or directory"

#: FlatCAMApp.py:4599
#, python-format
msgid "Saved to: %s"
msgstr "Saved to: %s"

#: FlatCAMApp.py:4662 FlatCAMApp.py:4695 FlatCAMApp.py:4706 FlatCAMApp.py:4717
#: flatcamTools/ToolNonCopperClear.py:489 flatcamTools/ToolSolderPaste.py:765
msgid ""
"[WARNING_NOTCL] Please enter a tool diameter with non-zero value, in Float "
"format."
msgstr ""
"[WARNING_NOTCL] Please enter a tool diameter with non-zero value, in Float "
"format."

#: FlatCAMApp.py:4667 FlatCAMApp.py:4700 FlatCAMApp.py:4711 FlatCAMApp.py:4722
#: flatcamGUI/FlatCAMGUI.py:3001
msgid "[WARNING_NOTCL] Adding Tool cancelled ..."
msgstr "[WARNING_NOTCL] Adding Tool cancelled ..."

#: FlatCAMApp.py:4670
msgid ""
"Adding Tool works only when Advanced is checked.\n"
"Go to Preferences -> General - Show Advanced Options."
msgstr ""
"Adding Tool works only when Advanced is checked.\n"
"Go to Preferences -> General - Show Advanced Options."

#: FlatCAMApp.py:4783
msgid "Object(s) deleted ..."
msgstr "Object(s) deleted ..."

#: FlatCAMApp.py:4787
msgid "Failed. No object(s) selected..."
msgstr "Failed. No object(s) selected..."

#: FlatCAMApp.py:4789
msgid "Save the work in Editor and try again ..."
msgstr "Save the work in Editor and try again ..."

#: FlatCAMApp.py:4802
msgid "Click to set the origin ..."
msgstr "Click to set the origin ..."

#: FlatCAMApp.py:4814
msgid "Jump to ..."
msgstr "Jump to ..."

#: FlatCAMApp.py:4815
msgid "Enter the coordinates in format X,Y:"
msgstr "Enter the coordinates in format X,Y:"

#: FlatCAMApp.py:4822
msgid "Wrong coordinates. Enter coordinates in format: X,Y"
msgstr "Wrong coordinates. Enter coordinates in format: X,Y"

#: FlatCAMApp.py:4840 flatcamEditors/FlatCAMExcEditor.py:2320
#: flatcamEditors/FlatCAMExcEditor.py:2327
#: flatcamEditors/FlatCAMGeoEditor.py:3648
#: flatcamEditors/FlatCAMGeoEditor.py:3662
#: flatcamEditors/FlatCAMGrbEditor.py:1040
#: flatcamEditors/FlatCAMGrbEditor.py:1141
#: flatcamEditors/FlatCAMGrbEditor.py:1409
#: flatcamEditors/FlatCAMGrbEditor.py:1666
#: flatcamEditors/FlatCAMGrbEditor.py:3960
#: flatcamEditors/FlatCAMGrbEditor.py:3974 flatcamGUI/FlatCAMGUI.py:2414
#: flatcamGUI/FlatCAMGUI.py:2426
msgid "[success] Done."
msgstr "[success] Done."

#: FlatCAMApp.py:4972 FlatCAMApp.py:5039
msgid "[WARNING_NOTCL] No object is selected. Select an object and try again."
msgstr "[WARNING_NOTCL] No object is selected. Select an object and try again."

#: FlatCAMApp.py:5080
msgid "[success] Origin set ..."
msgstr "[success] Origin set ..."

#: FlatCAMApp.py:5100
msgid "Preferences"
msgstr "Preferences"

#: FlatCAMApp.py:5120
msgid "[WARNING_NOTCL] No object selected to Flip on Y axis."
msgstr "[WARNING_NOTCL] No object selected to Flip on Y axis."

#: FlatCAMApp.py:5145
msgid "[success] Flip on Y axis done."
msgstr "[success] Flip on Y axis done."

#: FlatCAMApp.py:5147 FlatCAMApp.py:5187
#: flatcamEditors/FlatCAMGeoEditor.py:1355
#: flatcamEditors/FlatCAMGrbEditor.py:5343 flatcamTools/ToolTransform.py:748
#, python-format
msgid "[ERROR_NOTCL] Due of %s, Flip action was not executed."
msgstr "[ERROR_NOTCL] Due of %s, Flip action was not executed."

#: FlatCAMApp.py:5160
msgid "[WARNING_NOTCL] No object selected to Flip on X axis."
msgstr "[WARNING_NOTCL] No object selected to Flip on X axis."

#: FlatCAMApp.py:5185
msgid "[success] Flip on X axis done."
msgstr "[success] Flip on X axis done."

#: FlatCAMApp.py:5200
msgid "[WARNING_NOTCL] No object selected to Rotate."
msgstr "[WARNING_NOTCL] No object selected to Rotate."

#: FlatCAMApp.py:5203 FlatCAMApp.py:5248 FlatCAMApp.py:5279
msgid "Transform"
msgstr "Transform"

#: FlatCAMApp.py:5203 FlatCAMApp.py:5248 FlatCAMApp.py:5279
msgid "Enter the Angle value:"
msgstr "Enter the Angle value:"

#: FlatCAMApp.py:5233
msgid "[success] Rotation done."
msgstr "[success] Rotation done."

#: FlatCAMApp.py:5235 flatcamEditors/FlatCAMGeoEditor.py:1298
#: flatcamEditors/FlatCAMGrbEditor.py:5272 flatcamTools/ToolTransform.py:677
#, python-format
msgid "[ERROR_NOTCL] Due of %s, rotation movement was not executed."
msgstr "[ERROR_NOTCL] Due of %s, rotation movement was not executed."

#: FlatCAMApp.py:5246
msgid "[WARNING_NOTCL] No object selected to Skew/Shear on X axis."
msgstr "[WARNING_NOTCL] No object selected to Skew/Shear on X axis."

#: FlatCAMApp.py:5267
msgid "[success] Skew on X axis done."
msgstr "[success] Skew on X axis done."

#: FlatCAMApp.py:5277
msgid "[WARNING_NOTCL] No object selected to Skew/Shear on Y axis."
msgstr "[WARNING_NOTCL] No object selected to Skew/Shear on Y axis."

#: FlatCAMApp.py:5298
msgid "[success] Skew on Y axis done."
msgstr "[success] Skew on Y axis done."

#: FlatCAMApp.py:5368
msgid "Grid On/Off"
msgstr "Grid On/Off"

#: FlatCAMApp.py:5381 flatcamEditors/FlatCAMGeoEditor.py:937
#: flatcamEditors/FlatCAMGrbEditor.py:2381
#: flatcamEditors/FlatCAMGrbEditor.py:4861 flatcamGUI/ObjectUI.py:991
#: flatcamTools/ToolDblSided.py:160 flatcamTools/ToolDblSided.py:208
#: flatcamTools/ToolNonCopperClear.py:134 flatcamTools/ToolPaint.py:131
#: flatcamTools/ToolSolderPaste.py:115 flatcamTools/ToolSolderPaste.py:479
#: flatcamTools/ToolTransform.py:337
msgid "Add"
msgstr "Add"

#: FlatCAMApp.py:5382 FlatCAMObj.py:3295
#: flatcamEditors/FlatCAMGrbEditor.py:2386 flatcamGUI/FlatCAMGUI.py:527
#: flatcamGUI/FlatCAMGUI.py:724 flatcamGUI/FlatCAMGUI.py:1616
#: flatcamGUI/FlatCAMGUI.py:1953 flatcamGUI/ObjectUI.py:1007
#: flatcamTools/ToolNonCopperClear.py:146 flatcamTools/ToolPaint.py:143
#: flatcamTools/ToolSolderPaste.py:121 flatcamTools/ToolSolderPaste.py:481
msgid "Delete"
msgstr "Delete"

#: FlatCAMApp.py:5395
msgid "New Grid ..."
msgstr "New Grid ..."

#: FlatCAMApp.py:5396
msgid "Enter a Grid Value:"
msgstr "Enter a Grid Value:"

#: FlatCAMApp.py:5404 FlatCAMApp.py:5431
msgid ""
"[WARNING_NOTCL] Please enter a grid value with non-zero value, in Float "
"format."
msgstr ""
"[WARNING_NOTCL] Please enter a grid value with non-zero value, in Float "
"format."

#: FlatCAMApp.py:5410
msgid "[success] New Grid added ..."
msgstr "[success] New Grid added ..."

#: FlatCAMApp.py:5413
msgid "[WARNING_NOTCL] Grid already exists ..."
msgstr "[WARNING_NOTCL] Grid already exists ..."

#: FlatCAMApp.py:5416
msgid "[WARNING_NOTCL] Adding New Grid cancelled ..."
msgstr "[WARNING_NOTCL] Adding New Grid cancelled ..."

#: FlatCAMApp.py:5438
msgid "[ERROR_NOTCL] Grid Value does not exist ..."
msgstr "[ERROR_NOTCL] Grid Value does not exist ..."

#: FlatCAMApp.py:5441
msgid "[success] Grid Value deleted ..."
msgstr "[success] Grid Value deleted ..."

#: FlatCAMApp.py:5444
msgid "[WARNING_NOTCL] Delete Grid value cancelled ..."
msgstr "[WARNING_NOTCL] Delete Grid value cancelled ..."

#: FlatCAMApp.py:5483
msgid "[WARNING_NOTCL] No object selected to copy it's name"
msgstr "[WARNING_NOTCL] No object selected to copy it's name"

#: FlatCAMApp.py:5487
msgid "Name copied on clipboard ..."
msgstr "Name copied on clipboard ..."

#: FlatCAMApp.py:5529 flatcamEditors/FlatCAMGrbEditor.py:3901
msgid "[success] Coordinates copied to clipboard."
msgstr "[success] Coordinates copied to clipboard."

#: FlatCAMApp.py:5785 FlatCAMApp.py:5788 FlatCAMApp.py:5791 FlatCAMApp.py:5794
#: FlatCAMApp.py:5809 FlatCAMApp.py:5812 FlatCAMApp.py:5815 FlatCAMApp.py:5818
#: FlatCAMApp.py:5858 FlatCAMApp.py:5861 FlatCAMApp.py:5864 FlatCAMApp.py:5867
#: ObjectCollection.py:719 ObjectCollection.py:722 ObjectCollection.py:725
#: ObjectCollection.py:728
#, python-brace-format
msgid "[selected]<span style=\"color:{color};\">{name}</span> selected"
msgstr "[selected]<span style=\"color:{color};\">{name}</span> selected"

#: FlatCAMApp.py:5984
msgid ""
"There are files/objects opened in FlatCAM.\n"
"Creating a New project will delete them.\n"
"Do you want to Save the project?"
msgstr ""
"There are files/objects opened in FlatCAM.\n"
"Creating a New project will delete them.\n"
"Do you want to Save the project?"

#: FlatCAMApp.py:6005
msgid "[success] New Project created..."
msgstr "[success] New Project created..."

#: FlatCAMApp.py:6121 FlatCAMApp.py:6124 flatcamGUI/FlatCAMGUI.py:608
#: flatcamGUI/FlatCAMGUI.py:1832
msgid "Open Gerber"
msgstr "Open Gerber"

#: FlatCAMApp.py:6129
msgid "[WARNING_NOTCL] Open Gerber cancelled."
msgstr "[WARNING_NOTCL] Open Gerber cancelled."

#: FlatCAMApp.py:6150 FlatCAMApp.py:6153 flatcamGUI/FlatCAMGUI.py:609
#: flatcamGUI/FlatCAMGUI.py:1833
msgid "Open Excellon"
msgstr "Open Excellon"

#: FlatCAMApp.py:6158
msgid "[WARNING_NOTCL] Open Excellon cancelled."
msgstr "[WARNING_NOTCL] Open Excellon cancelled."

#: FlatCAMApp.py:6180 FlatCAMApp.py:6183
msgid "Open G-Code"
msgstr "Open G-Code"

#: FlatCAMApp.py:6188
msgid "[WARNING_NOTCL] Open G-Code cancelled."
msgstr "[WARNING_NOTCL] Open G-Code cancelled."

#: FlatCAMApp.py:6206 FlatCAMApp.py:6209
msgid "Open Project"
msgstr "Open Project"

#: FlatCAMApp.py:6217
msgid "[WARNING_NOTCL] Open Project cancelled."
msgstr "[WARNING_NOTCL] Open Project cancelled."

#: FlatCAMApp.py:6236 FlatCAMApp.py:6239
msgid "Open Configuration File"
msgstr "Open Configuration File"

#: FlatCAMApp.py:6243
msgid "[WARNING_NOTCL] Open Config cancelled."
msgstr "[WARNING_NOTCL] Open Config cancelled."

#: FlatCAMApp.py:6258 FlatCAMApp.py:6509 FlatCAMApp.py:8662 FlatCAMApp.py:8682
#: FlatCAMApp.py:8703 FlatCAMApp.py:8725
msgid "[WARNING_NOTCL] No object selected."
msgstr "[WARNING_NOTCL] No object selected."

#: FlatCAMApp.py:6259 FlatCAMApp.py:6510
msgid "Please Select a Geometry object to export"
msgstr "Please Select a Geometry object to export"

#: FlatCAMApp.py:6270
msgid "[ERROR_NOTCL] Only Geometry, Gerber and CNCJob objects can be used."
msgstr "[ERROR_NOTCL] Only Geometry, Gerber and CNCJob objects can be used."

#: FlatCAMApp.py:6283 FlatCAMApp.py:6287
msgid "Export SVG"
msgstr "Export SVG"

#: FlatCAMApp.py:6292
msgid "[WARNING_NOTCL] Export SVG cancelled."
msgstr "[WARNING_NOTCL] Export SVG cancelled."

#: FlatCAMApp.py:6311
msgid "[[WARNING_NOTCL]] Data must be a 3D array with last dimension 3 or 4"
msgstr "[[WARNING_NOTCL]] Data must be a 3D array with last dimension 3 or 4"

#: FlatCAMApp.py:6317 FlatCAMApp.py:6321
msgid "Export PNG Image"
msgstr "Export PNG Image"

#: FlatCAMApp.py:6326
msgid "Export PNG cancelled."
msgstr "Export PNG cancelled."

#: FlatCAMApp.py:6345
msgid ""
"[WARNING_NOTCL] No object selected. Please select an Gerber object to export."
msgstr ""
"[WARNING_NOTCL] No object selected. Please select an Gerber object to export."

#: FlatCAMApp.py:6350 FlatCAMApp.py:6473
msgid ""
"[ERROR_NOTCL] Failed. Only Gerber objects can be saved as Gerber files..."
msgstr ""
"[ERROR_NOTCL] Failed. Only Gerber objects can be saved as Gerber files..."

#: FlatCAMApp.py:6362
msgid "Save Gerber source file"
msgstr "Save Gerber source file"

#: FlatCAMApp.py:6367
msgid "[WARNING_NOTCL] Save Gerber source file cancelled."
msgstr "[WARNING_NOTCL] Save Gerber source file cancelled."

#: FlatCAMApp.py:6386
msgid ""
"[WARNING_NOTCL] No object selected. Please select an Excellon object to "
"export."
msgstr ""
"[WARNING_NOTCL] No object selected. Please select an Excellon object to "
"export."

#: FlatCAMApp.py:6391 FlatCAMApp.py:6432
msgid ""
"[ERROR_NOTCL] Failed. Only Excellon objects can be saved as Excellon files..."
msgstr ""
"[ERROR_NOTCL] Failed. Only Excellon objects can be saved as Excellon files..."

#: FlatCAMApp.py:6399 FlatCAMApp.py:6403
msgid "Save Excellon source file"
msgstr "Save Excellon source file"

#: FlatCAMApp.py:6408
msgid "[WARNING_NOTCL] Saving Excellon source file cancelled."
msgstr "[WARNING_NOTCL] Saving Excellon source file cancelled."

#: FlatCAMApp.py:6427
msgid ""
"[WARNING_NOTCL] No object selected. Please Select an Excellon object to "
"export."
msgstr ""
"[WARNING_NOTCL] No object selected. Please Select an Excellon object to "
"export."

#: FlatCAMApp.py:6440 FlatCAMApp.py:6444
msgid "Export Excellon"
msgstr "Export Excellon"

#: FlatCAMApp.py:6449
msgid "[WARNING_NOTCL] Export Excellon cancelled."
msgstr "[WARNING_NOTCL] Export Excellon cancelled."

#: FlatCAMApp.py:6468
msgid ""
"[WARNING_NOTCL] No object selected. Please Select an Gerber object to export."
msgstr ""
"[WARNING_NOTCL] No object selected. Please Select an Gerber object to export."

#: FlatCAMApp.py:6481 FlatCAMApp.py:6485
msgid "Export Gerber"
msgstr "Export Gerber"

#: FlatCAMApp.py:6490
msgid "[WARNING_NOTCL] Export Gerber cancelled."
msgstr "[WARNING_NOTCL] Export Gerber cancelled."

#: FlatCAMApp.py:6520
msgid "[ERROR_NOTCL] Only Geometry objects can be used."
msgstr "[ERROR_NOTCL] Only Geometry objects can be used."

#: FlatCAMApp.py:6534 FlatCAMApp.py:6538
msgid "Export DXF"
msgstr "Export DXF"

#: FlatCAMApp.py:6544
msgid "[WARNING_NOTCL] Export DXF cancelled."
msgstr "[WARNING_NOTCL] Export DXF cancelled."

#: FlatCAMApp.py:6564 FlatCAMApp.py:6567
msgid "Import SVG"
msgstr "Import SVG"

#: FlatCAMApp.py:6576
msgid "[WARNING_NOTCL] Open SVG cancelled."
msgstr "[WARNING_NOTCL] Open SVG cancelled."

#: FlatCAMApp.py:6595 FlatCAMApp.py:6599
msgid "Import DXF"
msgstr "Import DXF"

#: FlatCAMApp.py:6608
msgid "[WARNING_NOTCL] Open DXF cancelled."
msgstr "[WARNING_NOTCL] Open DXF cancelled."

#: FlatCAMApp.py:6626
#, python-format
msgid "%s"
msgstr "%s"

#: FlatCAMApp.py:6646
msgid ""
"[WARNING_NOTCL] Select an Gerber or Excellon file to view it's source file."
msgstr ""
"[WARNING_NOTCL] Select an Gerber or Excellon file to view it's source file."

#: FlatCAMApp.py:6653
msgid ""
"[WARNING_NOTCL] There is no selected object for which to see it's source "
"file code."
msgstr ""
"[WARNING_NOTCL] There is no selected object for which to see it's source "
"file code."

#: FlatCAMApp.py:6661
msgid "Source Editor"
msgstr "Source Editor"

#: FlatCAMApp.py:6671
#, python-format
msgid "[ERROR]App.on_view_source() -->%s"
msgstr "[ERROR]App.on_view_source() -->%s"

#: FlatCAMApp.py:6683 FlatCAMApp.py:7825 FlatCAMObj.py:5588
#: flatcamTools/ToolSolderPaste.py:1278
msgid "Code Editor"
msgstr "Code Editor"

#: FlatCAMApp.py:6695
msgid "Script Editor"
msgstr "Script Editor"

#: FlatCAMApp.py:6698
msgid ""
"#\n"
"# CREATE A NEW FLATCAM TCL SCRIPT\n"
"# TCL Tutorial here: https://www.tcl.tk/man/tcl8.5/tutorial/tcltutorial."
"html\n"
"#\n"
"\n"
"# FlatCAM commands list:\n"
"# AddCircle, AddPolygon, AddPolyline, AddRectangle, AlignDrill, "
"AlignDrillGrid, ClearShell, Cncjob,\n"
"# Cutout, Delete, Drillcncjob, ExportGcode, ExportSVG, Exteriors, GeoCutout, "
"GeoUnion, GetNames, GetSys,\n"
"# ImportSvg, Interiors, Isolate, Follow, JoinExcellon, JoinGeometry, "
"ListSys, MillHoles, Mirror, New,\n"
"# NewGeometry, Offset, OpenExcellon, OpenGCode, OpenGerber, OpenProject, "
"Options, Paint, Panelize,\n"
"# Plot, SaveProject, SaveSys, Scale, SetActive, SetSys, Skew, SubtractPoly,"
"SubtractRectangle, Version,\n"
"# WriteGCode\n"
"#\n"
"\n"
msgstr ""
"#\n"
"# CREATE A NEW FLATCAM TCL SCRIPT\n"
"# TCL Tutorial here: https://www.tcl.tk/man/tcl8.5/tutorial/tcltutorial."
"html\n"
"#\n"
"\n"
"# FlatCAM commands list:\n"
"# AddCircle, AddPolygon, AddPolyline, AddRectangle, AlignDrill, "
"AlignDrillGrid, ClearShell, Cncjob,\n"
"# Cutout, Delete, Drillcncjob, ExportGcode, ExportSVG, Exteriors, GeoCutout, "
"GeoUnion, GetNames, GetSys,\n"
"# ImportSvg, Interiors, Isolate, Follow, JoinExcellon, JoinGeometry, "
"ListSys, MillHoles, Mirror, New,\n"
"# NewGeometry, Offset, OpenExcellon, OpenGCode, OpenGerber, OpenProject, "
"Options, Paint, Panelize,\n"
"# Plot, SaveProject, SaveSys, Scale, SetActive, SetSys, Skew, SubtractPoly,"
"SubtractRectangle, Version,\n"
"# WriteGCode\n"
"#\n"
"\n"

#: FlatCAMApp.py:6721 FlatCAMApp.py:6724
msgid "Open TCL script"
msgstr "Open TCL script"

#: FlatCAMApp.py:6732
msgid "[WARNING_NOTCL] Open TCL script cancelled."
msgstr "[WARNING_NOTCL] Open TCL script cancelled."

#: FlatCAMApp.py:6744
#, python-format
msgid "[ERROR]App.on_fileopenscript() -->%s"
msgstr "[ERROR]App.on_fileopenscript() -->%s"

#: FlatCAMApp.py:6770 FlatCAMApp.py:6773
msgid "Run TCL script"
msgstr "Run TCL script"

#: FlatCAMApp.py:6781
msgid "[WARNING_NOTCL] Run TCL script cancelled."
msgstr "[WARNING_NOTCL] Run TCL script cancelled."

#: FlatCAMApp.py:6831 FlatCAMApp.py:6835
msgid "Save Project As ..."
msgstr "Save Project As ..."

#: FlatCAMApp.py:6832
#, python-brace-format
msgid "{l_save}/Project_{date}"
msgstr "{l_save}/Project_{date}"

#: FlatCAMApp.py:6840
msgid "[WARNING_NOTCL] Save Project cancelled."
msgstr "[WARNING_NOTCL] Save Project cancelled."

#: FlatCAMApp.py:6884
msgid "Exporting SVG"
msgstr "Exporting SVG"

#: FlatCAMApp.py:6918 FlatCAMApp.py:7024 FlatCAMApp.py:7139
#, python-format
msgid "[success] SVG file exported to %s"
msgstr "[success] SVG file exported to %s"

#: FlatCAMApp.py:6949 FlatCAMApp.py:7070
#, python-format
msgid "[WARNING_NOTCL] No object Box. Using instead %s"
msgstr "[WARNING_NOTCL] No object Box. Using instead %s"

#: FlatCAMApp.py:7027 FlatCAMApp.py:7142
msgid "Generating Film ... Please wait."
msgstr "Generating Film ... Please wait."

#: FlatCAMApp.py:7290
#, python-format
msgid "[success] Excellon file exported to %s"
msgstr "[success] Excellon file exported to %s"

#: FlatCAMApp.py:7297
msgid "Exporting Excellon"
msgstr "Exporting Excellon"

#: FlatCAMApp.py:7302 FlatCAMApp.py:7309
msgid "[ERROR_NOTCL] Could not export Excellon file."
msgstr "[ERROR_NOTCL] Could not export Excellon file."

#: FlatCAMApp.py:7407
#, python-format
msgid "[success] Gerber file exported to %s"
msgstr "[success] Gerber file exported to %s"

#: FlatCAMApp.py:7414
msgid "Exporting Gerber"
msgstr "Exporting Gerber"

#: FlatCAMApp.py:7419 FlatCAMApp.py:7426
msgid "[ERROR_NOTCL] Could not export Gerber file."
msgstr "[ERROR_NOTCL] Could not export Gerber file."

#: FlatCAMApp.py:7466
#, python-format
msgid "[success] DXF file exported to %s"
msgstr "[success] DXF file exported to %s"

#: FlatCAMApp.py:7472
msgid "Exporting DXF"
msgstr "Exporting DXF"

#: FlatCAMApp.py:7477 FlatCAMApp.py:7484
msgid "[[WARNING_NOTCL]] Could not export DXF file."
msgstr "[[WARNING_NOTCL]] Could not export DXF file."

#: FlatCAMApp.py:7504 FlatCAMApp.py:7546 FlatCAMApp.py:7590
msgid ""
"[ERROR_NOTCL] Not supported type is picked as parameter. Only Geometry and "
"Gerber are supported"
msgstr ""
"[ERROR_NOTCL] Not supported type is picked as parameter. Only Geometry and "
"Gerber are supported"

#: FlatCAMApp.py:7514
msgid "Importing SVG"
msgstr "Importing SVG"

#: FlatCAMApp.py:7525 FlatCAMApp.py:7567 FlatCAMApp.py:7610 FlatCAMApp.py:7687
#: FlatCAMApp.py:7748 FlatCAMApp.py:7811 flatcamTools/ToolPDF.py:212
#, python-format
msgid "[success] Opened: %s"
msgstr "[success] Opened: %s"

#: FlatCAMApp.py:7556
msgid "Importing DXF"
msgstr "Importing DXF"

#: FlatCAMApp.py:7598
msgid "Importing Image"
msgstr "Importing Image"

#: FlatCAMApp.py:7639 FlatCAMApp.py:7641
#, python-format
msgid "[ERROR_NOTCL] Failed to open file: %s"
msgstr "[ERROR_NOTCL] Failed to open file: %s"

#: FlatCAMApp.py:7644
#, python-brace-format
msgid "[ERROR_NOTCL] Failed to parse file: {name}. {error}"
msgstr "[ERROR_NOTCL] Failed to parse file: {name}. {error}"

#: FlatCAMApp.py:7651 FlatCAMObj.py:4266
#: flatcamEditors/FlatCAMExcEditor.py:2077
msgid "[ERROR] An internal error has ocurred. See shell.\n"
msgstr "[ERROR] An internal error has ocurred. See shell.\n"

#: FlatCAMApp.py:7660
msgid ""
"[ERROR_NOTCL] Object is not Gerber file or empty. Aborting object creation."
msgstr ""
"[ERROR_NOTCL] Object is not Gerber file or empty. Aborting object creation."

#: FlatCAMApp.py:7668
msgid "Opening Gerber"
msgstr "Opening Gerber"

#: FlatCAMApp.py:7678
msgid "[ERROR_NOTCL] Open Gerber failed. Probable not a Gerber file."
msgstr "[ERROR_NOTCL] Open Gerber failed. Probable not a Gerber file."

#: FlatCAMApp.py:7711 flatcamTools/ToolPcbWizard.py:421
msgid "[ERROR_NOTCL] This is not Excellon file."
msgstr "[ERROR_NOTCL] This is not Excellon file."

#: FlatCAMApp.py:7714
#, python-format
msgid "[ERROR_NOTCL] Cannot open file: %s"
msgstr "[ERROR_NOTCL] Cannot open file: %s"

#: FlatCAMApp.py:7719 flatcamTools/ToolPcbWizard.py:429
msgid "[ERROR_NOTCL] An internal error has occurred. See shell.\n"
msgstr "[ERROR_NOTCL] An internal error has occurred. See shell.\n"

#: FlatCAMApp.py:7732 flatcamTools/ToolPDF.py:262
#: flatcamTools/ToolPcbWizard.py:442
#, python-format
msgid "[ERROR_NOTCL] No geometry found in file: %s"
msgstr "[ERROR_NOTCL] No geometry found in file: %s"

#: FlatCAMApp.py:7735
msgid "Opening Excellon."
msgstr "Opening Excellon."

#: FlatCAMApp.py:7741
msgid "[ERROR_NOTCL] Open Excellon file failed. Probable not an Excellon file."
msgstr ""
"[ERROR_NOTCL] Open Excellon file failed. Probable not an Excellon file."

#: FlatCAMApp.py:7778
#, python-format
msgid "[ERROR_NOTCL] Failed to open %s"
msgstr "[ERROR_NOTCL] Failed to open %s"

#: FlatCAMApp.py:7788
msgid "[ERROR_NOTCL] This is not GCODE"
msgstr "[ERROR_NOTCL] This is not GCODE"

#: FlatCAMApp.py:7794
msgid "Opening G-Code."
msgstr "Opening G-Code."

#: FlatCAMApp.py:7802
msgid ""
"[ERROR_NOTCL] Failed to create CNCJob Object. Probable not a GCode file.\n"
" Attempting to create a FlatCAM CNCJob Object from G-Code file failed during "
"processing"
msgstr ""
"[ERROR_NOTCL] Failed to create CNCJob Object. Probable not a GCode file.\n"
" Attempting to create a FlatCAM CNCJob Object from G-Code file failed during "
"processing"

#: FlatCAMApp.py:7842
#, python-format
msgid "[ERROR_NOTCL] Failed to open config file: %s"
msgstr "[ERROR_NOTCL] Failed to open config file: %s"

#: FlatCAMApp.py:7868 FlatCAMApp.py:7885
#, python-format
msgid "[ERROR_NOTCL] Failed to open project file: %s"
msgstr "[ERROR_NOTCL] Failed to open project file: %s"

#: FlatCAMApp.py:7908
#, python-format
msgid "[success] Project loaded from: %s"
msgstr "[success] Project loaded from: %s"

#: FlatCAMApp.py:8013
msgid "Available commands:\n"
msgstr "Available commands:\n"

#: FlatCAMApp.py:8015
msgid ""
"\n"
"\n"
"Type help <command_name> for usage.\n"
" Example: help open_gerber"
msgstr ""
"\n"
"\n"
"Type help <command_name> for usage.\n"
" Example: help open_gerber"

#: FlatCAMApp.py:8165
msgid "Shows list of commands."
msgstr "Shows list of commands."

#: FlatCAMApp.py:8222
msgid "[ERROR_NOTCL] Failed to load recent item list."
msgstr "[ERROR_NOTCL] Failed to load recent item list."

#: FlatCAMApp.py:8229
msgid "[ERROR_NOTCL] Failed to parse recent item list."
msgstr "[ERROR_NOTCL] Failed to parse recent item list."

#: FlatCAMApp.py:8273
msgid "Clear Recent files"
msgstr "Clear Recent files"

#: FlatCAMApp.py:8290 flatcamGUI/FlatCAMGUI.py:968
msgid "<b>Shortcut Key List</b>"
msgstr "<b>Shortcut Key List</b>"

#: FlatCAMApp.py:8297
msgid ""
"\n"
"<p><span style=\"font-size:14px\"><strong>Selected Tab - Choose an Item from "
"Project Tab</strong></span></p>\n"
"\n"
"<p><span style=\"font-size:10px\"><strong>Details</strong>:<br />\n"
"The normal flow when working in FlatCAM is the following:</span></p>\n"
"\n"
"<ol>\n"
"\t<li><span style=\"font-size:10px\">Loat/Import a Gerber, Excellon, Gcode, "
"DXF, Raster Image or SVG file into FlatCAM using either the menu&#39;s, "
"toolbars, key shortcuts or even dragging and dropping the files on the GUI."
"<br />\n"
"\t<br />\n"
"\tYou can also load a <strong>FlatCAM project</strong> by double clicking on "
"the project file, drag &amp; drop of the file into the FLATCAM GUI or "
"through the menu/toolbar links offered within the app.</span><br />\n"
"\t&nbsp;</li>\n"
"\t<li><span style=\"font-size:10px\">Once an object is available in the "
"Project Tab, by selecting it and then focusing on <strong>SELECTED TAB </"
"strong>(more simpler is to double click the object name in the Project Tab), "
"<strong>SELECTED TAB </strong>will be updated with the object properties "
"according to it&#39;s kind: Gerber, Excellon, Geometry or CNCJob object.<br /"
">\n"
"\t<br />\n"
"\tIf the selection of the object is done on the canvas by single click "
"instead, and the <strong>SELECTED TAB</strong> is in focus, again the object "
"properties will be displayed into the Selected Tab. Alternatively, double "
"clicking on the object on the canvas will bring the <strong>SELECTED TAB</"
"strong> and populate it even if it was out of focus.<br />\n"
"\t<br />\n"
"\tYou can change the parameters in this screen and the flow direction is "
"like this:<br />\n"
"\t<br />\n"
"\t<strong>Gerber/Excellon Object</strong> -&gt; Change Param -&gt; Generate "
"Geometry -&gt;<strong> Geometry Object </strong>-&gt; Add tools (change "
"param in Selected Tab) -&gt; Generate CNCJob -&gt;<strong> CNCJob Object </"
"strong>-&gt; Verify GCode (through Edit CNC Code) and/or append/prepend to "
"GCode (again, done in <strong>SELECTED TAB)&nbsp;</strong>-&gt; Save GCode</"
"span></li>\n"
"</ol>\n"
"\n"
"<p><span style=\"font-size:10px\">A list of key shortcuts is available "
"through an menu entry in <strong>Help -&gt; Shortcuts List</strong>&nbsp;or "
"through it&#39;s own key shortcut: <strng>F3</strong>.</span></p>\n"
"\n"
"        "
msgstr ""
"\n"
"<p><span style=\"font-size:14px\"><strong>Selected Tab - Choose an Item from "
"Project Tab</strong></span></p>\n"
"\n"
"<p><span style=\"font-size:10px\"><strong>Details</strong>:<br />\n"
"The normal flow when working in FlatCAM is the following:</span></p>\n"
"\n"
"<ol>\n"
"\t<li><span style=\"font-size:10px\">Loat/Import a Gerber, Excellon, Gcode, "
"DXF, Raster Image or SVG file into FlatCAM using either the menu&#39;s, "
"toolbars, key shortcuts or even dragging and dropping the files on the GUI."
"<br />\n"
"\t<br />\n"
"\tYou can also load a <strong>FlatCAM project</strong> by double clicking on "
"the project file, drag &amp; drop of the file into the FLATCAM GUI or "
"through the menu/toolbar links offered within the app.</span><br />\n"
"\t&nbsp;</li>\n"
"\t<li><span style=\"font-size:10px\">Once an object is available in the "
"Project Tab, by selecting it and then focusing on <strong>SELECTED TAB </"
"strong>(more simpler is to double click the object name in the Project Tab), "
"<strong>SELECTED TAB </strong>will be updated with the object properties "
"according to it&#39;s kind: Gerber, Excellon, Geometry or CNCJob object.<br /"
">\n"
"\t<br />\n"
"\tIf the selection of the object is done on the canvas by single click "
"instead, and the <strong>SELECTED TAB</strong> is in focus, again the object "
"properties will be displayed into the Selected Tab. Alternatively, double "
"clicking on the object on the canvas will bring the <strong>SELECTED TAB</"
"strong> and populate it even if it was out of focus.<br />\n"
"\t<br />\n"
"\tYou can change the parameters in this screen and the flow direction is "
"like this:<br />\n"
"\t<br />\n"
"\t<strong>Gerber/Excellon Object</strong> -&gt; Change Param -&gt; Generate "
"Geometry -&gt;<strong> Geometry Object </strong>-&gt; Add tools (change "
"param in Selected Tab) -&gt; Generate CNCJob -&gt;<strong> CNCJob Object </"
"strong>-&gt; Verify GCode (through Edit CNC Code) and/or append/prepend to "
"GCode (again, done in <strong>SELECTED TAB)&nbsp;</strong>-&gt; Save GCode</"
"span></li>\n"
"</ol>\n"
"\n"
"<p><span style=\"font-size:10px\">A list of key shortcuts is available "
"through an menu entry in <strong>Help -&gt; Shortcuts List</strong>&nbsp;or "
"through it&#39;s own key shortcut: <strng>F3</strong>.</span></p>\n"
"\n"
"        "

#: FlatCAMApp.py:8404
msgid "[WARNING_NOTCL] Failed checking for latest version. Could not connect."
msgstr "[WARNING_NOTCL] Failed checking for latest version. Could not connect."

#: FlatCAMApp.py:8411
msgid "[ERROR_NOTCL] Could not parse information about latest version."
msgstr "[ERROR_NOTCL] Could not parse information about latest version."

#: FlatCAMApp.py:8421
msgid "[success] FlatCAM is up to date!"
msgstr "[success] FlatCAM is up to date!"

#: FlatCAMApp.py:8426
msgid "Newer Version Available"
msgstr "Newer Version Available"

#: FlatCAMApp.py:8427
msgid ""
"There is a newer version of FlatCAM available for download:\n"
"\n"
msgstr ""
"There is a newer version of FlatCAM available for download:\n"
"\n"

#: FlatCAMApp.py:8429
msgid "info"
msgstr "info"

#: FlatCAMApp.py:8448
msgid "[success] All plots disabled."
msgstr "[success] All plots disabled."

#: FlatCAMApp.py:8454
msgid "[success] All non selected plots disabled."
msgstr "[success] All non selected plots disabled."

#: FlatCAMApp.py:8460
msgid "[success] All plots enabled."
msgstr "[success] All plots enabled."

#: FlatCAMApp.py:8466
msgid "[success] Selected plots enabled..."
msgstr "[success] Selected plots enabled..."

#: FlatCAMApp.py:8474
msgid "[success] Selected plots disabled..."
msgstr "[success] Selected plots disabled..."

#: FlatCAMApp.py:8484 FlatCAMApp.py:8497
msgid "Working ..."
msgstr "Working ..."

#: FlatCAMApp.py:8531
msgid "Saving FlatCAM Project"
msgstr "Saving FlatCAM Project"

#: FlatCAMApp.py:8552 FlatCAMApp.py:8583
#, python-format
msgid "[success] Project saved to: %s"
msgstr "[success] Project saved to: %s"

#: FlatCAMApp.py:8570
#, python-format
msgid "[ERROR_NOTCL] Failed to verify project file: %s. Retry to save it."
msgstr "[ERROR_NOTCL] Failed to verify project file: %s. Retry to save it."

#: FlatCAMApp.py:8577
#, python-format
msgid "[ERROR_NOTCL] Failed to parse saved project file: %s. Retry to save it."
msgstr ""
"[ERROR_NOTCL] Failed to parse saved project file: %s. Retry to save it."

#: FlatCAMApp.py:8585
#, python-format
msgid "[ERROR_NOTCL] Failed to save project file: %s. Retry to save it."
msgstr "[ERROR_NOTCL] Failed to save project file: %s. Retry to save it."

#: FlatCAMObj.py:207
#, python-brace-format
msgid "[success] Name changed from {old} to {new}"
msgstr "[success] Name changed from {old} to {new}"

#: FlatCAMObj.py:553 FlatCAMObj.py:2034 FlatCAMObj.py:3300 FlatCAMObj.py:5485
msgid "<span style=\"color:green;\"><b>Basic</b></span>"
msgstr "<span style=\"color:green;\"><b>Basic</b></span>"

#: FlatCAMObj.py:565 FlatCAMObj.py:2050 FlatCAMObj.py:3322 FlatCAMObj.py:5491
msgid "<span style=\"color:red;\"><b>Advanced</b></span>"
msgstr "<span style=\"color:red;\"><b>Advanced</b></span>"

#: FlatCAMObj.py:927 FlatCAMObj.py:982
#, python-format
msgid "[success] Isolation geometry created: %s"
msgstr "[success] Isolation geometry created: %s"

#: FlatCAMObj.py:1161
msgid "Plotting Apertures"
msgstr "Plotting Apertures"

#: FlatCAMObj.py:1877 flatcamEditors/FlatCAMExcEditor.py:1368
msgid "Total Drills"
msgstr "Total Drills"

#: FlatCAMObj.py:1903 flatcamEditors/FlatCAMExcEditor.py:1400
msgid "Total Slots"
msgstr "Total Slots"

#: FlatCAMObj.py:2106 FlatCAMObj.py:3374 FlatCAMObj.py:3674 FlatCAMObj.py:3869
#: FlatCAMObj.py:3882 FlatCAMObj.py:3999 FlatCAMObj.py:4416 FlatCAMObj.py:4654
#: FlatCAMObj.py:5067 flatcamEditors/FlatCAMExcEditor.py:1474
#: flatcamTools/ToolCalculators.py:307 flatcamTools/ToolCalculators.py:318
#: flatcamTools/ToolCalculators.py:330 flatcamTools/ToolCalculators.py:345
#: flatcamTools/ToolCalculators.py:358 flatcamTools/ToolCalculators.py:372
#: flatcamTools/ToolCalculators.py:383 flatcamTools/ToolCalculators.py:394
#: flatcamTools/ToolCalculators.py:405 flatcamTools/ToolFilm.py:241
#: flatcamTools/ToolFilm.py:248 flatcamTools/ToolNonCopperClear.py:480
#: flatcamTools/ToolNonCopperClear.py:551
#: flatcamTools/ToolNonCopperClear.py:627
#: flatcamTools/ToolNonCopperClear.py:644 flatcamTools/ToolPaint.py:538
#: flatcamTools/ToolPaint.py:608 flatcamTools/ToolPaint.py:743
#: flatcamTools/ToolPaint.py:844 flatcamTools/ToolPaint.py:999
#: flatcamTools/ToolPanelize.py:385 flatcamTools/ToolPanelize.py:397
#: flatcamTools/ToolPanelize.py:410 flatcamTools/ToolPanelize.py:423
#: flatcamTools/ToolPanelize.py:435 flatcamTools/ToolPanelize.py:446
#: flatcamTools/ToolSolderPaste.py:756 flatcamTools/ToolSolderPaste.py:827
msgid "[ERROR_NOTCL] Wrong value format entered, use a number."
msgstr "[ERROR_NOTCL] Wrong value format entered, use a number."

#: FlatCAMObj.py:2330 FlatCAMObj.py:2422 FlatCAMObj.py:2545
msgid ""
"[ERROR_NOTCL] Please select one or more tools from the list and try again."
msgstr ""
"[ERROR_NOTCL] Please select one or more tools from the list and try again."

#: FlatCAMObj.py:2337
msgid ""
"[ERROR_NOTCL] Milling tool for DRILLS is larger than hole size. Cancelled."
msgstr ""
"[ERROR_NOTCL] Milling tool for DRILLS is larger than hole size. Cancelled."

#: FlatCAMObj.py:2351 FlatCAMObj.py:2446 FlatCAMObj.py:2565
msgid "Tool_nr"
msgstr "Tool_nr"

#: FlatCAMObj.py:2351 FlatCAMObj.py:2446 FlatCAMObj.py:2565
#: flatcamEditors/FlatCAMExcEditor.py:819
#: flatcamEditors/FlatCAMExcEditor.py:2020 flatcamGUI/ObjectUI.py:556
#: flatcamTools/ToolNonCopperClear.py:83 flatcamTools/ToolPaint.py:80
#: flatcamTools/ToolPcbWizard.py:78 flatcamTools/ToolSolderPaste.py:81
msgid "Diameter"
msgstr "Diameter"

#: FlatCAMObj.py:2351 FlatCAMObj.py:2446 FlatCAMObj.py:2565
msgid "Drills_Nr"
msgstr "Drills_Nr"

#: FlatCAMObj.py:2351 FlatCAMObj.py:2446 FlatCAMObj.py:2565
msgid "Slots_Nr"
msgstr "Slots_Nr"

#: FlatCAMObj.py:2432
msgid ""
"[ERROR_NOTCL] Milling tool for SLOTS is larger than hole size. Cancelled."
msgstr ""
"[ERROR_NOTCL] Milling tool for SLOTS is larger than hole size. Cancelled."

#: FlatCAMObj.py:2607 FlatCAMObj.py:4304 FlatCAMObj.py:4520 FlatCAMObj.py:4837
msgid ""
"[ERROR_NOTCL] Wrong value format for self.defaults[\"z_pdepth\"] or self."
"options[\"z_pdepth\"]"
msgstr ""
"[ERROR_NOTCL] Wrong value format for self.defaults[\"z_pdepth\"] or self."
"options[\"z_pdepth\"]"

#: FlatCAMObj.py:2619 FlatCAMObj.py:4316 FlatCAMObj.py:4532 FlatCAMObj.py:4849
msgid ""
"[ERROR_NOTCL] Wrong value format for self.defaults[\"feedrate_probe\"] or "
"self.options[\"feedrate_probe\"]"
msgstr ""
"[ERROR_NOTCL] Wrong value format for self.defaults[\"feedrate_probe\"] or "
"self.options[\"feedrate_probe\"]"

#: FlatCAMObj.py:2651 FlatCAMObj.py:4725 FlatCAMObj.py:4730 FlatCAMObj.py:4880
msgid "Generating CNC Code"
msgstr "Generating CNC Code"

#: FlatCAMObj.py:2677 FlatCAMObj.py:5026 camlib.py:5167 camlib.py:5626
#: camlib.py:5889
msgid ""
"[ERROR]The Toolchange X,Y field in Edit -> Preferences has to be in the "
"format (x, y) \n"
"but now there is only one value, not two. "
msgstr ""
"[ERROR]The Toolchange X,Y field in Edit -> Preferences has to be in the "
"format (x, y) \n"
"but now there is only one value, not two. "

#: FlatCAMObj.py:2997 FlatCAMObj.py:3925 FlatCAMObj.py:3926 FlatCAMObj.py:3935
msgid "Iso"
msgstr "Iso"

#: FlatCAMObj.py:2997 FlatCAMObj.py:3257 FlatCAMObj.py:3539
msgid "Rough"
msgstr "Rough"

#: FlatCAMObj.py:2997
msgid "Finish"
msgstr "Finish"

#: FlatCAMObj.py:3293 flatcamGUI/FlatCAMGUI.py:526 flatcamGUI/FlatCAMGUI.py:722
#: flatcamGUI/FlatCAMGUI.py:1615 flatcamGUI/FlatCAMGUI.py:1951
#: flatcamGUI/ObjectUI.py:999
msgid "Copy"
msgstr "Copy"

#: FlatCAMObj.py:3509
msgid "[ERROR_NOTCL] Please enter the desired tool diameter in Float format."
msgstr "[ERROR_NOTCL] Please enter the desired tool diameter in Float format."

#: FlatCAMObj.py:3584
msgid "[success] Tool added in Tool Table."
msgstr "[success] Tool added in Tool Table."

#: FlatCAMObj.py:3589
msgid "[ERROR_NOTCL] Default Tool added. Wrong value format entered."
msgstr "[ERROR_NOTCL] Default Tool added. Wrong value format entered."

#: FlatCAMObj.py:3619 FlatCAMObj.py:3629
msgid "[WARNING_NOTCL] Failed. Select a tool to copy."
msgstr "[WARNING_NOTCL] Failed. Select a tool to copy."

#: FlatCAMObj.py:3658
msgid "[success] Tool was copied in Tool Table."
msgstr "[success] Tool was copied in Tool Table."

#: FlatCAMObj.py:3691
msgid "[success] Tool was edited in Tool Table."
msgstr "[success] Tool was edited in Tool Table."

#: FlatCAMObj.py:3722 FlatCAMObj.py:3732
msgid "[WARNING_NOTCL] Failed. Select a tool to delete."
msgstr "[WARNING_NOTCL] Failed. Select a tool to delete."

#: FlatCAMObj.py:3756
msgid "[success] Tool was deleted in Tool Table."
msgstr "[success] Tool was deleted in Tool Table."

#: FlatCAMObj.py:4185
#, python-format
msgid ""
"[WARNING_NOTCL] This Geometry can't be processed because it is %s geometry."
msgstr ""
"[WARNING_NOTCL] This Geometry can't be processed because it is %s geometry."

#: FlatCAMObj.py:4202
msgid "[ERROR_NOTCL] Wrong Tool Dia value format entered, use a number."
msgstr "[ERROR_NOTCL] Wrong Tool Dia value format entered, use a number."

#: FlatCAMObj.py:4229
msgid "[ERROR_NOTCL] Failed. No tool selected in the tool table ..."
msgstr "[ERROR_NOTCL] Failed. No tool selected in the tool table ..."

#: FlatCAMObj.py:4267
#, python-format
msgid "FlatCAMObj.FlatCAMGeometry.mtool_gen_cncjob() --> %s"
msgstr "FlatCAMObj.FlatCAMGeometry.mtool_gen_cncjob() --> %s"

#: FlatCAMObj.py:4425 FlatCAMObj.py:4663
msgid ""
"[WARNING] Tool Offset is selected in Tool Table but no value is provided.\n"
"Add a Tool Offset or change the Offset Type."
msgstr ""
"[WARNING] Tool Offset is selected in Tool Table but no value is provided.\n"
"Add a Tool Offset or change the Offset Type."

#: FlatCAMObj.py:4544 flatcamTools/ToolSolderPaste.py:1107
#: flatcamTools/ToolSolderPaste.py:1162
msgid "[ERROR_NOTCL] Cancelled. Empty file, it has no geometry..."
msgstr "[ERROR_NOTCL] Cancelled. Empty file, it has no geometry..."

#: FlatCAMObj.py:4913 FlatCAMObj.py:4923 camlib.py:3348 camlib.py:3357
msgid "[ERROR_NOTCL] Scale factor has to be a number: integer or float."
msgstr "[ERROR_NOTCL] Scale factor has to be a number: integer or float."

#: FlatCAMObj.py:4961
msgid "[success] Geometry Scale done."
msgstr "[success] Geometry Scale done."

#: FlatCAMObj.py:4978 camlib.py:3426
msgid ""
"[ERROR_NOTCL] An (x,y) pair of values are needed. Probable you entered only "
"one value in the Offset field."
msgstr ""
"[ERROR_NOTCL] An (x,y) pair of values are needed. Probable you entered only "
"one value in the Offset field."

#: FlatCAMObj.py:4998
msgid "[success] Geometry Offset done."
msgstr "[success] Geometry Offset done."

#: FlatCAMObj.py:5553 FlatCAMObj.py:5558 flatcamTools/ToolSolderPaste.py:1361
msgid "Export Machine Code ..."
msgstr "Export Machine Code ..."

#: FlatCAMObj.py:5564 flatcamTools/ToolSolderPaste.py:1364
msgid "[WARNING_NOTCL] Export Machine Code cancelled ..."
msgstr "[WARNING_NOTCL] Export Machine Code cancelled ..."

#: FlatCAMObj.py:5577
#, python-format
msgid "[success] Machine Code file saved to: %s"
msgstr "[success] Machine Code file saved to: %s"

#: FlatCAMObj.py:5599
#, python-format
msgid "[ERROR]FlatCAMCNNJob.on_edit_code_click() -->%s"
msgstr "[ERROR]FlatCAMCNNJob.on_edit_code_click() -->%s"

#: FlatCAMObj.py:5716
#, python-format
msgid ""
"[WARNING_NOTCL] This CNCJob object can't be processed because it is a %s "
"CNCJob object."
msgstr ""
"[WARNING_NOTCL] This CNCJob object can't be processed because it is a %s "
"CNCJob object."

#: FlatCAMObj.py:5769
msgid "[ERROR_NOTCL] G-code does not have a units code: either G20 or G21"
msgstr "[ERROR_NOTCL] G-code does not have a units code: either G20 or G21"

#: FlatCAMObj.py:5782
msgid ""
"[ERROR_NOTCL] Cancelled. The Toolchange Custom code is enabled but it's "
"empty."
msgstr ""
"[ERROR_NOTCL] Cancelled. The Toolchange Custom code is enabled but it's "
"empty."

#: FlatCAMObj.py:5789
msgid "[success] Toolchange G-code was replaced by a custom code."
msgstr "[success] Toolchange G-code was replaced by a custom code."

#: FlatCAMObj.py:5804 flatcamTools/ToolSolderPaste.py:1390
msgid "[WARNING_NOTCL] No such file or directory"
msgstr "[WARNING_NOTCL] No such file or directory"

#: FlatCAMObj.py:5824 FlatCAMObj.py:5836
msgid ""
"[WARNING_NOTCL] The used postprocessor file has to have in it's name: "
"'toolchange_custom'"
msgstr ""
"[WARNING_NOTCL] The used postprocessor file has to have in it's name: "
"'toolchange_custom'"

#: FlatCAMObj.py:5842
msgid "[ERROR] There is no postprocessor file."
msgstr "[ERROR] There is no postprocessor file."

#: ObjectCollection.py:420
#, python-brace-format
msgid "Object renamed from <b>{old}</b> to <b>{new}</b>"
msgstr "Object renamed from <b>{old}</b> to <b>{new}</b>"

#: ObjectCollection.py:759
#, python-format
msgid "[ERROR] Cause of error: %s"
msgstr "[ERROR] Cause of error: %s"

#: camlib.py:197
msgid "[ERROR_NOTCL] self.solid_geometry is neither BaseGeometry or list."
msgstr "[ERROR_NOTCL] self.solid_geometry is neither BaseGeometry or list."

#: camlib.py:1391
msgid "[success] Object was mirrored ..."
msgstr "[success] Object was mirrored ..."

#: camlib.py:1393
msgid "[ERROR_NOTCL] Failed to mirror. No object selected"
msgstr "[ERROR_NOTCL] Failed to mirror. No object selected"

#: camlib.py:1429
msgid "[success] Object was rotated ..."
msgstr "[success] Object was rotated ..."

#: camlib.py:1431
msgid "[ERROR_NOTCL] Failed to rotate. No object selected"
msgstr "[ERROR_NOTCL] Failed to rotate. No object selected"

#: camlib.py:1465
msgid "[success] Object was skewed ..."
msgstr "[success] Object was skewed ..."

#: camlib.py:1467
msgid "[ERROR_NOTCL] Failed to skew. No object selected"
msgstr "[ERROR_NOTCL] Failed to skew. No object selected"

#: camlib.py:2728 camlib.py:2813
#, python-format
msgid "[WARNING] Coordinates missing, line ignored: %s"
msgstr "[WARNING] Coordinates missing, line ignored: %s"

#: camlib.py:2729 camlib.py:2814
msgid "[WARNING_NOTCL] GERBER file might be CORRUPT. Check the file !!!"
msgstr "[WARNING_NOTCL] GERBER file might be CORRUPT. Check the file !!!"

#: camlib.py:2778
#, python-format
msgid ""
"[ERROR] Region does not have enough points. File will be processed but there "
"are parser errors. Line number: %s"
msgstr ""
"[ERROR] Region does not have enough points. File will be processed but there "
"are parser errors. Line number: %s"

#: camlib.py:3170
#, python-format
msgid ""
"[ERROR]Gerber Parser ERROR.\n"
"%s:"
msgstr ""
"[ERROR]Gerber Parser ERROR.\n"
"%s:"

#: camlib.py:3394
msgid "[success] Gerber Scale done."
msgstr "[success] Gerber Scale done."

#: camlib.py:3459
msgid "[success] Gerber Offset done."
msgstr "[success] Gerber Offset done."

#: camlib.py:3513
msgid "[success] Gerber Mirror done."
msgstr "[success] Gerber Mirror done."

#: camlib.py:3559
msgid "[success] Gerber Skew done."
msgstr "[success] Gerber Skew done."

#: camlib.py:3597
msgid "[success] Gerber Rotate done."
msgstr "[success] Gerber Rotate done."

#: camlib.py:3878
#, python-format
msgid "[ERROR_NOTCL] This is GCODE mark: %s"
msgstr "[ERROR_NOTCL] This is GCODE mark: %s"

#: camlib.py:3993
#, python-format
msgid ""
"[WARNING] No tool diameter info's. See shell.\n"
"A tool change event: T%s was found but the Excellon file have no "
"informations regarding the tool diameters therefore the application will try "
"to load it by using some 'fake' diameters.\n"
"The user needs to edit the resulting Excellon object and change the "
"diameters to reflect the real diameters."
msgstr ""
"[WARNING] No tool diameter info's. See shell.\n"
"A tool change event: T%s was found but the Excellon file have no "
"informations regarding the tool diameters therefore the application will try "
"to load it by using some 'fake' diameters.\n"
"The user needs to edit the resulting Excellon object and change the "
"diameters to reflect the real diameters."

#: camlib.py:4458
#, python-brace-format
msgid ""
"[ERROR] Excellon Parser error.\n"
"Parsing Failed. Line {l_nr}: {line}\n"
msgstr ""
"[ERROR] Excellon Parser error.\n"
"Parsing Failed. Line {l_nr}: {line}\n"

#: camlib.py:4537
msgid ""
"[WARNING] Excellon.create_geometry() -> a drill location was skipped due of "
"not having a tool associated.\n"
"Check the resulting GCode."
msgstr ""
"[WARNING] Excellon.create_geometry() -> a drill location was skipped due of "
"not having a tool associated.\n"
"Check the resulting GCode."

#: camlib.py:5076
#, python-format
msgid "[ERROR] There is no such parameter: %s"
msgstr "[ERROR] There is no such parameter: %s"

#: camlib.py:5146
msgid ""
"[WARNING] The Cut Z parameter has positive value. It is the depth value to "
"drill into material.\n"
"The Cut Z parameter needs to have a negative value, assuming it is a typo "
"therefore the app will convert the value to negative. Check the resulting "
"CNC code (Gcode etc)."
msgstr ""
"[WARNING] The Cut Z parameter has positive value. It is the depth value to "
"drill into material.\n"
"The Cut Z parameter needs to have a negative value, assuming it is a typo "
"therefore the app will convert the value to negative. Check the resulting "
"CNC code (Gcode etc)."

#: camlib.py:5153 camlib.py:5649 camlib.py:5912
#, python-format
msgid ""
"[WARNING] The Cut Z parameter is zero. There will be no cut, skipping %s file"
msgstr ""
"[WARNING] The Cut Z parameter is zero. There will be no cut, skipping %s file"

#: camlib.py:5382 camlib.py:5479 camlib.py:5537
msgid "[ERROR_NOTCL] The loaded Excellon file has no drills ..."
msgstr "[ERROR_NOTCL] The loaded Excellon file has no drills ..."

#: camlib.py:5484
msgid "[ERROR_NOTCL] Wrong optimization type selected."
msgstr "[ERROR_NOTCL] Wrong optimization type selected."

#: camlib.py:5637 camlib.py:5900
msgid ""
"[ERROR_NOTCL] Cut_Z parameter is None or zero. Most likely a bad "
"combinations of other parameters."
msgstr ""
"[ERROR_NOTCL] Cut_Z parameter is None or zero. Most likely a bad "
"combinations of other parameters."

#: camlib.py:5642 camlib.py:5905
msgid ""
"[WARNING] The Cut Z parameter has positive value. It is the depth value to "
"cut into material.\n"
"The Cut Z parameter needs to have a negative value, assuming it is a typo "
"therefore the app will convert the value to negative.Check the resulting CNC "
"code (Gcode etc)."
msgstr ""
"[WARNING] The Cut Z parameter has positive value. It is the depth value to "
"cut into material.\n"
"The Cut Z parameter needs to have a negative value, assuming it is a typo "
"therefore the app will convert the value to negative.Check the resulting CNC "
"code (Gcode etc)."

#: camlib.py:5654 camlib.py:5917
msgid "[ERROR_NOTCL] Travel Z parameter is None or zero."
msgstr "[ERROR_NOTCL] Travel Z parameter is None or zero."

#: camlib.py:5658 camlib.py:5921
msgid ""
"[WARNING] The Travel Z parameter has negative value. It is the height value "
"to travel between cuts.\n"
"The Z Travel parameter needs to have a positive value, assuming it is a typo "
"therefore the app will convert the value to positive.Check the resulting CNC "
"code (Gcode etc)."
msgstr ""
"[WARNING] The Travel Z parameter has negative value. It is the height value "
"to travel between cuts.\n"
"The Z Travel parameter needs to have a positive value, assuming it is a typo "
"therefore the app will convert the value to positive.Check the resulting CNC "
"code (Gcode etc)."

#: camlib.py:5665 camlib.py:5928
#, python-format
msgid ""
"[WARNING] The Z Travel parameter is zero. This is dangerous, skipping %s file"
msgstr ""
"[WARNING] The Z Travel parameter is zero. This is dangerous, skipping %s file"

#: camlib.py:5795
#, python-format
msgid "[ERROR]Expected a Geometry, got %s"
msgstr "[ERROR]Expected a Geometry, got %s"

#: camlib.py:5801
msgid ""
"[ERROR_NOTCL] Trying to generate a CNC Job from a Geometry object without "
"solid_geometry."
msgstr ""
"[ERROR_NOTCL] Trying to generate a CNC Job from a Geometry object without "
"solid_geometry."

#: camlib.py:5840
msgid ""
"[ERROR_NOTCL] The Tool Offset value is too negative to use for the "
"current_geometry.\n"
"Raise the value (in module) and try again."
msgstr ""
"[ERROR_NOTCL] The Tool Offset value is too negative to use for the "
"current_geometry.\n"
"Raise the value (in module) and try again."

#: camlib.py:6052
msgid "[ERROR_NOTCL] There is no tool data in the SolderPaste geometry."
msgstr "[ERROR_NOTCL] There is no tool data in the SolderPaste geometry."

#: flatcamEditors/FlatCAMExcEditor.py:37 flatcamEditors/FlatCAMExcEditor.py:143
#: flatcamEditors/FlatCAMGrbEditor.py:229
#: flatcamEditors/FlatCAMGrbEditor.py:234
msgid "Click to place ..."
msgstr "Click to place ..."

#: flatcamEditors/FlatCAMExcEditor.py:46
msgid "[WARNING_NOTCL] To add a drill first select a tool"
msgstr "[WARNING_NOTCL] To add a drill first select a tool"

#: flatcamEditors/FlatCAMExcEditor.py:62 flatcamEditors/FlatCAMExcEditor.py:165
#: flatcamEditors/FlatCAMExcEditor.py:450
#: flatcamEditors/FlatCAMExcEditor.py:475
#: flatcamEditors/FlatCAMGrbEditor.py:451
#: flatcamEditors/FlatCAMGrbEditor.py:1776
#: flatcamEditors/FlatCAMGrbEditor.py:1804
msgid "Click on target location ..."
msgstr "Click on target location ..."

#: flatcamEditors/FlatCAMExcEditor.py:108
msgid "[success] Done. Drill added."
msgstr "[success] Done. Drill added."

#: flatcamEditors/FlatCAMExcEditor.py:150
msgid "[WARNING_NOTCL] To add an Drill Array first select a tool in Tool Table"
msgstr ""
"[WARNING_NOTCL] To add an Drill Array first select a tool in Tool Table"

#: flatcamEditors/FlatCAMExcEditor.py:182
msgid "Click on the Drill Circular Array Start position"
msgstr "Click on the Drill Circular Array Start position"

#: flatcamEditors/FlatCAMExcEditor.py:204
#: flatcamEditors/FlatCAMGrbEditor.py:494
msgid ""
"[ERROR_NOTCL] The value is not Float. Check for comma instead of dot "
"separator."
msgstr ""
"[ERROR_NOTCL] The value is not Float. Check for comma instead of dot "
"separator."

#: flatcamEditors/FlatCAMExcEditor.py:207
#, python-format
msgid "[ERROR_NOTCL] The value is mistyped. Check the value. %s"
msgstr "[ERROR_NOTCL] The value is mistyped. Check the value. %s"

#: flatcamEditors/FlatCAMExcEditor.py:305
msgid "[WARNING_NOTCL] Too many drills for the selected spacing angle."
msgstr "[WARNING_NOTCL] Too many drills for the selected spacing angle."

#: flatcamEditors/FlatCAMExcEditor.py:322
msgid "[success] Done. Drill Array added."
msgstr "[success] Done. Drill Array added."

#: flatcamEditors/FlatCAMExcEditor.py:333
msgid "Click on the Drill(s) to resize ..."
msgstr "Click on the Drill(s) to resize ..."

#: flatcamEditors/FlatCAMExcEditor.py:354
msgid ""
"[ERROR_NOTCL] Resize drill(s) failed. Please enter a diameter for resize."
msgstr ""
"[ERROR_NOTCL] Resize drill(s) failed. Please enter a diameter for resize."

#: flatcamEditors/FlatCAMExcEditor.py:424
msgid "[success] Done. Drill Resize completed."
msgstr "[success] Done. Drill Resize completed."

#: flatcamEditors/FlatCAMExcEditor.py:427
msgid "[WARNING_NOTCL] Cancelled. No drills selected for resize ..."
msgstr "[WARNING_NOTCL] Cancelled. No drills selected for resize ..."

#: flatcamEditors/FlatCAMExcEditor.py:452
#: flatcamEditors/FlatCAMGrbEditor.py:1778
msgid "Click on reference location ..."
msgstr "Click on reference location ..."

#: flatcamEditors/FlatCAMExcEditor.py:507
msgid "[success] Done. Drill(s) Move completed."
msgstr "[success] Done. Drill(s) Move completed."

#: flatcamEditors/FlatCAMExcEditor.py:592
msgid "[success] Done. Drill(s) copied."
msgstr "[success] Done. Drill(s) copied."

#: flatcamEditors/FlatCAMExcEditor.py:792 flatcamGUI/FlatCAMGUI.py:5008
msgid "Excellon Editor"
msgstr "Excellon Editor"

#: flatcamEditors/FlatCAMExcEditor.py:799
#: flatcamEditors/FlatCAMGrbEditor.py:2266
msgid "Name:"
msgstr "Name:"

#: flatcamEditors/FlatCAMExcEditor.py:805 flatcamTools/ToolNonCopperClear.py:72
#: flatcamTools/ToolPaint.py:69 flatcamTools/ToolSolderPaste.py:70
msgid "Tools Table"
msgstr "Tools Table"

#: flatcamEditors/FlatCAMExcEditor.py:807 flatcamGUI/ObjectUI.py:538
msgid ""
"Tools in this Excellon object\n"
"when are used for drilling."
msgstr ""
"Tools in this Excellon object\n"
"when are used for drilling."

#: flatcamEditors/FlatCAMExcEditor.py:827
msgid "Add/Delete Tool"
msgstr "Add/Delete Tool"

#: flatcamEditors/FlatCAMExcEditor.py:829
msgid ""
"Add/Delete a tool to the tool list\n"
"for this Excellon object."
msgstr ""
"Add/Delete a tool to the tool list\n"
"for this Excellon object."

#: flatcamEditors/FlatCAMExcEditor.py:837 flatcamTools/ToolCutOut.py:77
msgid "Tool Dia:"
msgstr "Tool Dia:"

#: flatcamEditors/FlatCAMExcEditor.py:839 flatcamGUI/FlatCAMGUI.py:5037
#: flatcamGUI/ObjectUI.py:978
msgid "Diameter for the new tool"
msgstr "Diameter for the new tool"

#: flatcamEditors/FlatCAMExcEditor.py:847
msgid "Add Tool"
msgstr "Add Tool"

#: flatcamEditors/FlatCAMExcEditor.py:849
msgid ""
"Add a new tool to the tool list\n"
"with the diameter specified above."
msgstr ""
"Add a new tool to the tool list\n"
"with the diameter specified above."

#: flatcamEditors/FlatCAMExcEditor.py:861
msgid "Delete Tool"
msgstr "Delete Tool"

#: flatcamEditors/FlatCAMExcEditor.py:863
msgid ""
"Delete a tool in the tool list\n"
"by selecting a row in the tool table."
msgstr ""
"Delete a tool in the tool list\n"
"by selecting a row in the tool table."

#: flatcamEditors/FlatCAMExcEditor.py:881
msgid "Resize Drill(s)"
msgstr "Resize Drill(s)"

#: flatcamEditors/FlatCAMExcEditor.py:883
msgid "Resize a drill or a selection of drills."
msgstr "Resize a drill or a selection of drills."

#: flatcamEditors/FlatCAMExcEditor.py:890
msgid "Resize Dia:"
msgstr "Resize Dia:"

#: flatcamEditors/FlatCAMExcEditor.py:892
msgid "Diameter to resize to."
msgstr "Diameter to resize to."

#: flatcamEditors/FlatCAMExcEditor.py:900
msgid "Resize"
msgstr "Resize"

#: flatcamEditors/FlatCAMExcEditor.py:902
msgid "Resize drill(s)"
msgstr "Resize drill(s)"

#: flatcamEditors/FlatCAMExcEditor.py:924 flatcamGUI/FlatCAMGUI.py:1612
msgid "Add Drill Array"
msgstr "Add Drill Array"

#: flatcamEditors/FlatCAMExcEditor.py:926
msgid "Add an array of drills (linear or circular array)"
msgstr "Add an array of drills (linear or circular array)"

#: flatcamEditors/FlatCAMExcEditor.py:932
msgid ""
"Select the type of drills array to create.\n"
"It can be Linear X(Y) or Circular"
msgstr ""
"Select the type of drills array to create.\n"
"It can be Linear X(Y) or Circular"

#: flatcamEditors/FlatCAMExcEditor.py:935
#: flatcamEditors/FlatCAMGrbEditor.py:2499
msgid "Linear"
msgstr "Linear"

#: flatcamEditors/FlatCAMExcEditor.py:936
#: flatcamEditors/FlatCAMGrbEditor.py:2500
msgid "Circular"
msgstr "Circular"

#: flatcamEditors/FlatCAMExcEditor.py:944 flatcamGUI/FlatCAMGUI.py:5047
msgid "Nr of drills:"
msgstr "Nr of drills:"

#: flatcamEditors/FlatCAMExcEditor.py:946 flatcamGUI/FlatCAMGUI.py:5049
msgid "Specify how many drills to be in the array."
msgstr "Specify how many drills to be in the array."

#: flatcamEditors/FlatCAMExcEditor.py:964
#: flatcamEditors/FlatCAMExcEditor.py:1010
#: flatcamEditors/FlatCAMGrbEditor.py:2526
#: flatcamEditors/FlatCAMGrbEditor.py:2571
msgid "Direction:"
msgstr "Direction:"

#: flatcamEditors/FlatCAMExcEditor.py:966
#: flatcamEditors/FlatCAMGrbEditor.py:2528 flatcamGUI/FlatCAMGUI.py:5064
msgid ""
"Direction on which the linear array is oriented:\n"
"- 'X' - horizontal axis \n"
"- 'Y' - vertical axis or \n"
"- 'Angle' - a custom angle for the array inclination"
msgstr ""
"Direction on which the linear array is oriented:\n"
"- 'X' - horizontal axis \n"
"- 'Y' - vertical axis or \n"
"- 'Angle' - a custom angle for the array inclination"

#: flatcamEditors/FlatCAMExcEditor.py:979
#: flatcamEditors/FlatCAMGrbEditor.py:2541 flatcamGUI/FlatCAMGUI.py:5078
msgid "Pitch:"
msgstr "Pitch:"

#: flatcamEditors/FlatCAMExcEditor.py:981
#: flatcamEditors/FlatCAMGrbEditor.py:2543 flatcamGUI/FlatCAMGUI.py:5080
msgid "Pitch = Distance between elements of the array."
msgstr "Pitch = Distance between elements of the array."

#: flatcamEditors/FlatCAMExcEditor.py:989
#: flatcamEditors/FlatCAMExcEditor.py:1024
#: flatcamEditors/FlatCAMGeoEditor.py:665
#: flatcamEditors/FlatCAMGrbEditor.py:2550
#: flatcamEditors/FlatCAMGrbEditor.py:2586
#: flatcamEditors/FlatCAMGrbEditor.py:4588 flatcamGUI/FlatCAMGUI.py:5089
#: flatcamTools/ToolTransform.py:68
msgid "Angle:"
msgstr "Angle:"

#: flatcamEditors/FlatCAMExcEditor.py:991
#: flatcamEditors/FlatCAMGrbEditor.py:2552
msgid ""
"Angle at which the linear array is placed.\n"
"The precision is of max 2 decimals.\n"
"Min value is: -359.99 degrees.\n"
"Max value is:  360.00 degrees."
msgstr ""
"Angle at which the linear array is placed.\n"
"The precision is of max 2 decimals.\n"
"Min value is: -359.99 degrees.\n"
"Max value is:  360.00 degrees."

#: flatcamEditors/FlatCAMExcEditor.py:1012
#: flatcamEditors/FlatCAMGrbEditor.py:2573
msgid ""
"Direction for circular array.Can be CW = clockwise or CCW = counter "
"clockwise."
msgstr ""
"Direction for circular array.Can be CW = clockwise or CCW = counter "
"clockwise."

#: flatcamEditors/FlatCAMExcEditor.py:1026
#: flatcamEditors/FlatCAMGrbEditor.py:2588 flatcamGUI/FlatCAMGUI.py:5091
#: flatcamGUI/FlatCAMGUI.py:5117
msgid "Angle at which each element in circular array is placed."
msgstr "Angle at which each element in circular array is placed."

#: flatcamEditors/FlatCAMExcEditor.py:1487
msgid ""
"[WARNING_NOTCL] Tool already in the original or actual tool list.\n"
"Save and reedit Excellon if you need to add this tool. "
msgstr ""
"[WARNING_NOTCL] Tool already in the original or actual tool list.\n"
"Save and reedit Excellon if you need to add this tool. "

#: flatcamEditors/FlatCAMExcEditor.py:1496 flatcamGUI/FlatCAMGUI.py:2997
#, python-brace-format
msgid "[success] Added new tool with dia: {dia} {units}"
msgstr "[success] Added new tool with dia: {dia} {units}"

#: flatcamEditors/FlatCAMExcEditor.py:1528
msgid "[WARNING_NOTCL] Select a tool in Tool Table"
msgstr "[WARNING_NOTCL] Select a tool in Tool Table"

#: flatcamEditors/FlatCAMExcEditor.py:1560
#, python-brace-format
msgid "[success] Deleted tool with dia: {del_dia} {units}"
msgstr "[success] Deleted tool with dia: {del_dia} {units}"

#: flatcamEditors/FlatCAMExcEditor.py:2074
msgid ""
"[ERROR_NOTCL] There are no Tools definitions in the file. Aborting Excellon "
"creation."
msgstr ""
"[ERROR_NOTCL] There are no Tools definitions in the file. Aborting Excellon "
"creation."

#: flatcamEditors/FlatCAMExcEditor.py:2083
msgid "Creating Excellon."
msgstr "Creating Excellon."

#: flatcamEditors/FlatCAMExcEditor.py:2092
msgid "[success] Excellon editing finished."
msgstr "[success] Excellon editing finished."

#: flatcamEditors/FlatCAMExcEditor.py:2109
msgid "[WARNING_NOTCL] Cancelled. There is no Tool/Drill selected"
msgstr "[WARNING_NOTCL] Cancelled. There is no Tool/Drill selected"

#: flatcamEditors/FlatCAMExcEditor.py:2637
msgid "[success] Done. Drill(s) deleted."
msgstr "[success] Done. Drill(s) deleted."

#: flatcamEditors/FlatCAMExcEditor.py:2705
#: flatcamEditors/FlatCAMGrbEditor.py:4350
msgid "Click on the circular array Center position"
msgstr "Click on the circular array Center position"

#: flatcamEditors/FlatCAMGeoEditor.py:80
#: flatcamEditors/FlatCAMGrbEditor.py:2416
msgid "Buffer distance:"
msgstr "Buffer distance:"

#: flatcamEditors/FlatCAMGeoEditor.py:81
#: flatcamEditors/FlatCAMGrbEditor.py:2417
msgid "Buffer corner:"
msgstr "Buffer corner:"

#: flatcamEditors/FlatCAMGeoEditor.py:83
msgid ""
"There are 3 types of corners:\n"
" - 'Round': the corner is rounded for exterior buffer.\n"
" - 'Square:' the corner is met in a sharp angle for exterior buffer.\n"
" - 'Beveled:' the corner is a line that directly connects the features "
"meeting in the corner"
msgstr ""
"There are 3 types of corners:\n"
" - 'Round': the corner is rounded for exterior buffer.\n"
" - 'Square:' the corner is met in a sharp angle for exterior buffer.\n"
" - 'Beveled:' the corner is a line that directly connects the features "
"meeting in the corner"

#: flatcamEditors/FlatCAMGeoEditor.py:89
#: flatcamEditors/FlatCAMGrbEditor.py:2425
msgid "Round"
msgstr "Round"

#: flatcamEditors/FlatCAMGeoEditor.py:90
#: flatcamEditors/FlatCAMGrbEditor.py:2426
msgid "Square"
msgstr "Square"

#: flatcamEditors/FlatCAMGeoEditor.py:91
#: flatcamEditors/FlatCAMGrbEditor.py:2427
msgid "Beveled"
msgstr "Beveled"

#: flatcamEditors/FlatCAMGeoEditor.py:98
msgid "Buffer Interior"
msgstr "Buffer Interior"

#: flatcamEditors/FlatCAMGeoEditor.py:100
msgid "Buffer Exterior"
msgstr "Buffer Exterior"

#: flatcamEditors/FlatCAMGeoEditor.py:106
msgid "Full Buffer"
msgstr "Full Buffer"

#: flatcamEditors/FlatCAMGeoEditor.py:127
#: flatcamEditors/FlatCAMGeoEditor.py:2682
msgid "Buffer Tool"
msgstr "Buffer Tool"

#: flatcamEditors/FlatCAMGeoEditor.py:138
#: flatcamEditors/FlatCAMGeoEditor.py:155
#: flatcamEditors/FlatCAMGeoEditor.py:172
#: flatcamEditors/FlatCAMGeoEditor.py:2700
#: flatcamEditors/FlatCAMGeoEditor.py:2726
#: flatcamEditors/FlatCAMGeoEditor.py:2752
#: flatcamEditors/FlatCAMGrbEditor.py:4402
msgid ""
"[WARNING_NOTCL] Buffer distance value is missing or wrong format. Add it and "
"retry."
msgstr ""
"[WARNING_NOTCL] Buffer distance value is missing or wrong format. Add it and "
"retry."

#: flatcamEditors/FlatCAMGeoEditor.py:343
msgid "Text Tool"
msgstr "Text Tool"

#: flatcamEditors/FlatCAMGeoEditor.py:401 flatcamGUI/FlatCAMGUI.py:803
msgid "Tool"
msgstr "Tool"

#: flatcamEditors/FlatCAMGeoEditor.py:432 flatcamGUI/FlatCAMGUI.py:4054
#: flatcamGUI/FlatCAMGUI.py:5163 flatcamGUI/FlatCAMGUI.py:5597
#: flatcamGUI/FlatCAMGUI.py:5874 flatcamGUI/FlatCAMGUI.py:6014
#: flatcamGUI/ObjectUI.py:260
msgid "Tool dia:"
msgstr "Tool dia:"

#: flatcamEditors/FlatCAMGeoEditor.py:434 flatcamGUI/FlatCAMGUI.py:6016
msgid ""
"Diameter of the tool to\n"
"be used in the operation."
msgstr ""
"Diameter of the tool to\n"
"be used in the operation."

#: flatcamEditors/FlatCAMGeoEditor.py:443 flatcamGUI/FlatCAMGUI.py:5780
#: flatcamGUI/FlatCAMGUI.py:6025 flatcamTools/ToolNonCopperClear.py:165
#: flatcamTools/ToolPaint.py:160
msgid "Overlap Rate:"
msgstr "Overlap Rate:"

#: flatcamEditors/FlatCAMGeoEditor.py:445 flatcamTools/ToolPaint.py:162
#, python-format
msgid ""
"How much (fraction) of the tool width to overlap each tool pass.\n"
"Example:\n"
"A value here of 0.25 means 25% from the tool diameter found above.\n"
"\n"
"Adjust the value starting with lower values\n"
"and increasing it if areas that should be painted are still \n"
"not painted.\n"
"Lower values = faster processing, faster execution on PCB.\n"
"Higher values = slow processing and slow execution on CNC\n"
"due of too many paths."
msgstr ""
"How much (fraction) of the tool width to overlap each tool pass.\n"
"Example:\n"
"A value here of 0.25 means 25% from the tool diameter found above.\n"
"\n"
"Adjust the value starting with lower values\n"
"and increasing it if areas that should be painted are still \n"
"not painted.\n"
"Lower values = faster processing, faster execution on PCB.\n"
"Higher values = slow processing and slow execution on CNC\n"
"due of too many paths."

#: flatcamEditors/FlatCAMGeoEditor.py:461 flatcamGUI/FlatCAMGUI.py:5796
#: flatcamGUI/FlatCAMGUI.py:5882 flatcamGUI/FlatCAMGUI.py:6035
#: flatcamTools/ToolCutOut.py:86 flatcamTools/ToolNonCopperClear.py:181
#: flatcamTools/ToolPaint.py:177
msgid "Margin:"
msgstr "Margin:"

#: flatcamEditors/FlatCAMGeoEditor.py:463 flatcamGUI/FlatCAMGUI.py:6037
#: flatcamTools/ToolPaint.py:179
msgid ""
"Distance by which to avoid\n"
"the edges of the polygon to\n"
"be painted."
msgstr ""
"Distance by which to avoid\n"
"the edges of the polygon to\n"
"be painted."

#: flatcamEditors/FlatCAMGeoEditor.py:472 flatcamGUI/FlatCAMGUI.py:5805
#: flatcamGUI/FlatCAMGUI.py:6046 flatcamTools/ToolNonCopperClear.py:190
#: flatcamTools/ToolPaint.py:188
msgid "Method:"
msgstr "Method:"

#: flatcamEditors/FlatCAMGeoEditor.py:474 flatcamGUI/FlatCAMGUI.py:6048
msgid ""
"Algorithm to paint the polygon:<BR><B>Standard</B>: Fixed step inwards."
"<BR><B>Seed-based</B>: Outwards from seed."
msgstr ""
"Algorithm to paint the polygon:<BR><B>Standard</B>: Fixed step inwards."
"<BR><B>Seed-based</B>: Outwards from seed."

#: flatcamEditors/FlatCAMGeoEditor.py:487 flatcamGUI/FlatCAMGUI.py:5821
#: flatcamGUI/FlatCAMGUI.py:6061 flatcamTools/ToolNonCopperClear.py:206
#: flatcamTools/ToolPaint.py:204
msgid "Connect:"
msgstr "Connect:"

#: flatcamEditors/FlatCAMGeoEditor.py:489 flatcamGUI/FlatCAMGUI.py:5823
#: flatcamGUI/FlatCAMGUI.py:6063 flatcamTools/ToolNonCopperClear.py:208
#: flatcamTools/ToolPaint.py:206
msgid ""
"Draw lines between resulting\n"
"segments to minimize tool lifts."
msgstr ""
"Draw lines between resulting\n"
"segments to minimize tool lifts."

#: flatcamEditors/FlatCAMGeoEditor.py:496 flatcamGUI/FlatCAMGUI.py:5830
#: flatcamGUI/FlatCAMGUI.py:6071 flatcamTools/ToolNonCopperClear.py:215
#: flatcamTools/ToolPaint.py:213
msgid "Contour:"
msgstr "Contour:"

#: flatcamEditors/FlatCAMGeoEditor.py:498 flatcamGUI/FlatCAMGUI.py:5832
#: flatcamGUI/FlatCAMGUI.py:6073 flatcamTools/ToolNonCopperClear.py:217
#: flatcamTools/ToolPaint.py:215
msgid ""
"Cut around the perimeter of the polygon\n"
"to trim rough edges."
msgstr ""
"Cut around the perimeter of the polygon\n"
"to trim rough edges."

#: flatcamEditors/FlatCAMGeoEditor.py:509
msgid "Paint"
msgstr "Paint"

#: flatcamEditors/FlatCAMGeoEditor.py:527 flatcamGUI/FlatCAMGUI.py:643
#: flatcamGUI/FlatCAMGUI.py:1866 flatcamGUI/ObjectUI.py:1314
#: flatcamTools/ToolPaint.py:341
msgid "Paint Tool"
msgstr "Paint Tool"

#: flatcamEditors/FlatCAMGeoEditor.py:563
msgid "[WARNING_NOTCL] Paint cancelled. No shape selected."
msgstr "[WARNING_NOTCL] Paint cancelled. No shape selected."

#: flatcamEditors/FlatCAMGeoEditor.py:574 flatcamTools/ToolCutOut.py:355
#: flatcamTools/ToolCutOut.py:518 flatcamTools/ToolCutOut.py:657
#: flatcamTools/ToolCutOut.py:762 flatcamTools/ToolDblSided.py:363
msgid ""
"[WARNING_NOTCL] Tool diameter value is missing or wrong format. Add it and "
"retry."
msgstr ""
"[WARNING_NOTCL] Tool diameter value is missing or wrong format. Add it and "
"retry."

#: flatcamEditors/FlatCAMGeoEditor.py:585
msgid ""
"[WARNING_NOTCL] Overlap value is missing or wrong format. Add it and retry."
msgstr ""
"[WARNING_NOTCL] Overlap value is missing or wrong format. Add it and retry."

#: flatcamEditors/FlatCAMGeoEditor.py:597
msgid ""
"[WARNING_NOTCL] Margin distance value is missing or wrong format. Add it and "
"retry."
msgstr ""
"[WARNING_NOTCL] Margin distance value is missing or wrong format. Add it and "
"retry."

#: flatcamEditors/FlatCAMGeoEditor.py:606
#: flatcamEditors/FlatCAMGeoEditor.py:2707
#: flatcamEditors/FlatCAMGeoEditor.py:2733
#: flatcamEditors/FlatCAMGeoEditor.py:2759
#: flatcamTools/ToolNonCopperClear.py:813 flatcamTools/ToolProperties.py:104
msgid "Tools"
msgstr "Tools"

#: flatcamEditors/FlatCAMGeoEditor.py:617
#: flatcamEditors/FlatCAMGeoEditor.py:990
#: flatcamEditors/FlatCAMGrbEditor.py:4539
#: flatcamEditors/FlatCAMGrbEditor.py:4924 flatcamGUI/FlatCAMGUI.py:654
#: flatcamGUI/FlatCAMGUI.py:1879 flatcamTools/ToolTransform.py:398
msgid "Transform Tool"
msgstr "Transform Tool"

#: flatcamEditors/FlatCAMGeoEditor.py:618
#: flatcamEditors/FlatCAMGeoEditor.py:679
#: flatcamEditors/FlatCAMGrbEditor.py:4540
#: flatcamEditors/FlatCAMGrbEditor.py:4602 flatcamTools/ToolTransform.py:24
#: flatcamTools/ToolTransform.py:82
msgid "Rotate"
msgstr "Rotate"

#: flatcamEditors/FlatCAMGeoEditor.py:619
#: flatcamEditors/FlatCAMGrbEditor.py:4541 flatcamTools/ToolTransform.py:25
msgid "Skew/Shear"
msgstr "Skew/Shear"

#: flatcamEditors/FlatCAMGeoEditor.py:620
#: flatcamEditors/FlatCAMGrbEditor.py:2471
#: flatcamEditors/FlatCAMGrbEditor.py:4542 flatcamGUI/FlatCAMGUI.py:718
#: flatcamGUI/FlatCAMGUI.py:1947 flatcamGUI/ObjectUI.py:100
#: flatcamTools/ToolTransform.py:26
msgid "Scale"
msgstr "Scale"

#: flatcamEditors/FlatCAMGeoEditor.py:621
#: flatcamEditors/FlatCAMGrbEditor.py:4543 flatcamTools/ToolTransform.py:27
msgid "Mirror (Flip)"
msgstr "Mirror (Flip)"

#: flatcamEditors/FlatCAMGeoEditor.py:622
#: flatcamEditors/FlatCAMGrbEditor.py:4544 flatcamGUI/ObjectUI.py:127
#: flatcamGUI/ObjectUI.py:891 flatcamGUI/ObjectUI.py:1465
#: flatcamTools/ToolTransform.py:28
msgid "Offset"
msgstr "Offset"

#: flatcamEditors/FlatCAMGeoEditor.py:633
#: flatcamEditors/FlatCAMGrbEditor.py:4556
#, python-format
msgid "Editor %s"
msgstr "Editor %s"

#: flatcamEditors/FlatCAMGeoEditor.py:667
#: flatcamEditors/FlatCAMGrbEditor.py:4590 flatcamTools/ToolTransform.py:70
msgid ""
"Angle for Rotation action, in degrees.\n"
"Float number between -360 and 359.\n"
"Positive numbers for CW motion.\n"
"Negative numbers for CCW motion."
msgstr ""
"Angle for Rotation action, in degrees.\n"
"Float number between -360 and 359.\n"
"Positive numbers for CW motion.\n"
"Negative numbers for CCW motion."

#: flatcamEditors/FlatCAMGeoEditor.py:681
#: flatcamEditors/FlatCAMGrbEditor.py:4604
msgid ""
"Rotate the selected shape(s).\n"
"The point of reference is the middle of\n"
"the bounding box for all selected shapes."
msgstr ""
"Rotate the selected shape(s).\n"
"The point of reference is the middle of\n"
"the bounding box for all selected shapes."

#: flatcamEditors/FlatCAMGeoEditor.py:704
#: flatcamEditors/FlatCAMGrbEditor.py:4627 flatcamTools/ToolTransform.py:107
msgid "Angle X:"
msgstr "Angle X:"

#: flatcamEditors/FlatCAMGeoEditor.py:706
#: flatcamEditors/FlatCAMGeoEditor.py:724
#: flatcamEditors/FlatCAMGrbEditor.py:4629
#: flatcamEditors/FlatCAMGrbEditor.py:4647 flatcamTools/ToolTransform.py:109
#: flatcamTools/ToolTransform.py:127
msgid ""
"Angle for Skew action, in degrees.\n"
"Float number between -360 and 359."
msgstr ""
"Angle for Skew action, in degrees.\n"
"Float number between -360 and 359."

#: flatcamEditors/FlatCAMGeoEditor.py:715
#: flatcamEditors/FlatCAMGrbEditor.py:4638 flatcamTools/ToolTransform.py:118
msgid "Skew X"
msgstr "Skew X"

#: flatcamEditors/FlatCAMGeoEditor.py:717
#: flatcamEditors/FlatCAMGeoEditor.py:735
#: flatcamEditors/FlatCAMGrbEditor.py:4640
#: flatcamEditors/FlatCAMGrbEditor.py:4658
msgid ""
"Skew/shear the selected shape(s).\n"
"The point of reference is the middle of\n"
"the bounding box for all selected shapes."
msgstr ""
"Skew/shear the selected shape(s).\n"
"The point of reference is the middle of\n"
"the bounding box for all selected shapes."

#: flatcamEditors/FlatCAMGeoEditor.py:722
#: flatcamEditors/FlatCAMGrbEditor.py:4645 flatcamTools/ToolTransform.py:125
msgid "Angle Y:"
msgstr "Angle Y:"

#: flatcamEditors/FlatCAMGeoEditor.py:733
#: flatcamEditors/FlatCAMGrbEditor.py:4656 flatcamTools/ToolTransform.py:136
msgid "Skew Y"
msgstr "Skew Y"

#: flatcamEditors/FlatCAMGeoEditor.py:761
#: flatcamEditors/FlatCAMGrbEditor.py:4684 flatcamTools/ToolTransform.py:164
msgid "Factor X:"
msgstr "Factor X:"

#: flatcamEditors/FlatCAMGeoEditor.py:763
#: flatcamEditors/FlatCAMGrbEditor.py:4686 flatcamTools/ToolTransform.py:166
msgid "Factor for Scale action over X axis."
msgstr "Factor for Scale action over X axis."

#: flatcamEditors/FlatCAMGeoEditor.py:771
#: flatcamEditors/FlatCAMGrbEditor.py:4694 flatcamTools/ToolTransform.py:174
msgid "Scale X"
msgstr "Scale X"

#: flatcamEditors/FlatCAMGeoEditor.py:773
#: flatcamEditors/FlatCAMGeoEditor.py:790
#: flatcamEditors/FlatCAMGrbEditor.py:4696
#: flatcamEditors/FlatCAMGrbEditor.py:4713
msgid ""
"Scale the selected shape(s).\n"
"The point of reference depends on \n"
"the Scale reference checkbox state."
msgstr ""
"Scale the selected shape(s).\n"
"The point of reference depends on \n"
"the Scale reference checkbox state."

#: flatcamEditors/FlatCAMGeoEditor.py:778
#: flatcamEditors/FlatCAMGrbEditor.py:4701 flatcamTools/ToolTransform.py:181
msgid "Factor Y:"
msgstr "Factor Y:"

#: flatcamEditors/FlatCAMGeoEditor.py:780
#: flatcamEditors/FlatCAMGrbEditor.py:4703 flatcamTools/ToolTransform.py:183
msgid "Factor for Scale action over Y axis."
msgstr "Factor for Scale action over Y axis."

#: flatcamEditors/FlatCAMGeoEditor.py:788
#: flatcamEditors/FlatCAMGrbEditor.py:4711 flatcamTools/ToolTransform.py:191
msgid "Scale Y"
msgstr "Scale Y"

#: flatcamEditors/FlatCAMGeoEditor.py:797
#: flatcamEditors/FlatCAMGrbEditor.py:4720 flatcamGUI/FlatCAMGUI.py:6420
#: flatcamTools/ToolTransform.py:200
msgid "Link"
msgstr "Link"

#: flatcamEditors/FlatCAMGeoEditor.py:799
#: flatcamEditors/FlatCAMGrbEditor.py:4722
msgid ""
"Scale the selected shape(s)\n"
"using the Scale Factor X for both axis."
msgstr ""
"Scale the selected shape(s)\n"
"using the Scale Factor X for both axis."

#: flatcamEditors/FlatCAMGeoEditor.py:805
#: flatcamEditors/FlatCAMGrbEditor.py:4728 flatcamGUI/FlatCAMGUI.py:6428
#: flatcamTools/ToolTransform.py:208
msgid "Scale Reference"
msgstr "Scale Reference"

#: flatcamEditors/FlatCAMGeoEditor.py:807
#: flatcamEditors/FlatCAMGrbEditor.py:4730
msgid ""
"Scale the selected shape(s)\n"
"using the origin reference when checked,\n"
"and the center of the biggest bounding box\n"
"of the selected shapes when unchecked."
msgstr ""
"Scale the selected shape(s)\n"
"using the origin reference when checked,\n"
"and the center of the biggest bounding box\n"
"of the selected shapes when unchecked."

#: flatcamEditors/FlatCAMGeoEditor.py:835
#: flatcamEditors/FlatCAMGrbEditor.py:4759 flatcamTools/ToolTransform.py:238
msgid "Value X:"
msgstr "Value X:"

#: flatcamEditors/FlatCAMGeoEditor.py:837
#: flatcamEditors/FlatCAMGrbEditor.py:4761 flatcamTools/ToolTransform.py:240
msgid "Value for Offset action on X axis."
msgstr "Value for Offset action on X axis."

#: flatcamEditors/FlatCAMGeoEditor.py:845
#: flatcamEditors/FlatCAMGrbEditor.py:4769 flatcamTools/ToolTransform.py:248
msgid "Offset X"
msgstr "Offset X"

#: flatcamEditors/FlatCAMGeoEditor.py:847
#: flatcamEditors/FlatCAMGeoEditor.py:865
#: flatcamEditors/FlatCAMGrbEditor.py:4771
#: flatcamEditors/FlatCAMGrbEditor.py:4789
msgid ""
"Offset the selected shape(s).\n"
"The point of reference is the middle of\n"
"the bounding box for all selected shapes.\n"
msgstr ""
"Offset the selected shape(s).\n"
"The point of reference is the middle of\n"
"the bounding box for all selected shapes.\n"

#: flatcamEditors/FlatCAMGeoEditor.py:853
#: flatcamEditors/FlatCAMGrbEditor.py:4777 flatcamTools/ToolTransform.py:255
msgid "Value Y:"
msgstr "Value Y:"

#: flatcamEditors/FlatCAMGeoEditor.py:855
#: flatcamEditors/FlatCAMGrbEditor.py:4779 flatcamTools/ToolTransform.py:257
msgid "Value for Offset action on Y axis."
msgstr "Value for Offset action on Y axis."

#: flatcamEditors/FlatCAMGeoEditor.py:863
#: flatcamEditors/FlatCAMGrbEditor.py:4787 flatcamTools/ToolTransform.py:265
msgid "Offset Y"
msgstr "Offset Y"

#: flatcamEditors/FlatCAMGeoEditor.py:894
#: flatcamEditors/FlatCAMGrbEditor.py:4818 flatcamTools/ToolTransform.py:295
msgid "Flip on X"
msgstr "Flip on X"

#: flatcamEditors/FlatCAMGeoEditor.py:896
#: flatcamEditors/FlatCAMGeoEditor.py:904
#: flatcamEditors/FlatCAMGrbEditor.py:4820
#: flatcamEditors/FlatCAMGrbEditor.py:4828
msgid ""
"Flip the selected shape(s) over the X axis.\n"
"Does not create a new shape."
msgstr ""
"Flip the selected shape(s) over the X axis.\n"
"Does not create a new shape."

#: flatcamEditors/FlatCAMGeoEditor.py:902
#: flatcamEditors/FlatCAMGrbEditor.py:4826 flatcamTools/ToolTransform.py:303
msgid "Flip on Y"
msgstr "Flip on Y"

#: flatcamEditors/FlatCAMGeoEditor.py:911
#: flatcamEditors/FlatCAMGrbEditor.py:4835 flatcamTools/ToolTransform.py:312
msgid "Ref Pt"
msgstr "Ref Pt"

#: flatcamEditors/FlatCAMGeoEditor.py:913
#: flatcamEditors/FlatCAMGrbEditor.py:4837
msgid ""
"Flip the selected shape(s)\n"
"around the point in Point Entry Field.\n"
"\n"
"The point coordinates can be captured by\n"
"left click on canvas together with pressing\n"
"SHIFT key. \n"
"Then click Add button to insert coordinates.\n"
"Or enter the coords in format (x, y) in the\n"
"Point Entry field and click Flip on X(Y)"
msgstr ""
"Flip the selected shape(s)\n"
"around the point in Point Entry Field.\n"
"\n"
"The point coordinates can be captured by\n"
"left click on canvas together with pressing\n"
"SHIFT key. \n"
"Then click Add button to insert coordinates.\n"
"Or enter the coords in format (x, y) in the\n"
"Point Entry field and click Flip on X(Y)"

#: flatcamEditors/FlatCAMGeoEditor.py:925
#: flatcamEditors/FlatCAMGrbEditor.py:4849 flatcamTools/ToolTransform.py:325
msgid "Point:"
msgstr "Point:"

#: flatcamEditors/FlatCAMGeoEditor.py:927
#: flatcamEditors/FlatCAMGrbEditor.py:4851
msgid ""
"Coordinates in format (x, y) used as reference for mirroring.\n"
"The 'x' in (x, y) will be used when using Flip on X and\n"
"the 'y' in (x, y) will be used when using Flip on Y."
msgstr ""
"Coordinates in format (x, y) used as reference for mirroring.\n"
"The 'x' in (x, y) will be used when using Flip on X and\n"
"the 'y' in (x, y) will be used when using Flip on Y."

#: flatcamEditors/FlatCAMGeoEditor.py:939
#: flatcamEditors/FlatCAMGrbEditor.py:4863 flatcamTools/ToolTransform.py:339
msgid ""
"The point coordinates can be captured by\n"
"left click on canvas together with pressing\n"
"SHIFT key. Then click Add button to insert."
msgstr ""
"The point coordinates can be captured by\n"
"left click on canvas together with pressing\n"
"SHIFT key. Then click Add button to insert."

#: flatcamEditors/FlatCAMGeoEditor.py:1054
#: flatcamEditors/FlatCAMGrbEditor.py:4988
msgid "[WARNING_NOTCL] Transformation cancelled. No shape selected."
msgstr "[WARNING_NOTCL] Transformation cancelled. No shape selected."

#: flatcamEditors/FlatCAMGeoEditor.py:1075
#: flatcamEditors/FlatCAMGrbEditor.py:5008 flatcamTools/ToolTransform.py:468
msgid "[ERROR_NOTCL] Wrong value format entered for Rotate, use a number."
msgstr "[ERROR_NOTCL] Wrong value format entered for Rotate, use a number."

#: flatcamEditors/FlatCAMGeoEditor.py:1112
#: flatcamEditors/FlatCAMGrbEditor.py:5051 flatcamTools/ToolTransform.py:502
msgid "[ERROR_NOTCL] Wrong value format entered for Skew X, use a number."
msgstr "[ERROR_NOTCL] Wrong value format entered for Skew X, use a number."

#: flatcamEditors/FlatCAMGeoEditor.py:1133
#: flatcamEditors/FlatCAMGrbEditor.py:5078 flatcamTools/ToolTransform.py:520
msgid "[ERROR_NOTCL] Wrong value format entered for Skew Y, use a number."
msgstr "[ERROR_NOTCL] Wrong value format entered for Skew Y, use a number."

#: flatcamEditors/FlatCAMGeoEditor.py:1154
#: flatcamEditors/FlatCAMGrbEditor.py:5105 flatcamTools/ToolTransform.py:538
msgid "[ERROR_NOTCL] Wrong value format entered for Scale X, use a number."
msgstr "[ERROR_NOTCL] Wrong value format entered for Scale X, use a number."

#: flatcamEditors/FlatCAMGeoEditor.py:1191
#: flatcamEditors/FlatCAMGrbEditor.py:5146 flatcamTools/ToolTransform.py:572
msgid "[ERROR_NOTCL] Wrong value format entered for Scale Y, use a number."
msgstr "[ERROR_NOTCL] Wrong value format entered for Scale Y, use a number."

#: flatcamEditors/FlatCAMGeoEditor.py:1223
#: flatcamEditors/FlatCAMGrbEditor.py:5184 flatcamTools/ToolTransform.py:601
msgid "[ERROR_NOTCL] Wrong value format entered for Offset X, use a number."
msgstr "[ERROR_NOTCL] Wrong value format entered for Offset X, use a number."

#: flatcamEditors/FlatCAMGeoEditor.py:1244
#: flatcamEditors/FlatCAMGrbEditor.py:5210 flatcamTools/ToolTransform.py:619
msgid "[ERROR_NOTCL] Wrong value format entered for Offset Y, use a number."
msgstr "[ERROR_NOTCL] Wrong value format entered for Offset Y, use a number."

#: flatcamEditors/FlatCAMGeoEditor.py:1262
#: flatcamEditors/FlatCAMGrbEditor.py:5233
msgid "[WARNING_NOTCL] No shape selected. Please Select a shape to rotate!"
msgstr "[WARNING_NOTCL] No shape selected. Please Select a shape to rotate!"

#: flatcamEditors/FlatCAMGeoEditor.py:1265
#: flatcamEditors/FlatCAMGrbEditor.py:5236 flatcamTools/ToolTransform.py:640
msgid "Appying Rotate"
msgstr "Appying Rotate"

#: flatcamEditors/FlatCAMGeoEditor.py:1293
#: flatcamEditors/FlatCAMGrbEditor.py:5269
msgid "[success] Done. Rotate completed."
msgstr "[success] Done. Rotate completed."

#: flatcamEditors/FlatCAMGeoEditor.py:1309
#: flatcamEditors/FlatCAMGrbEditor.py:5288
msgid "[WARNING_NOTCL] No shape selected. Please Select a shape to flip!"
msgstr "[WARNING_NOTCL] No shape selected. Please Select a shape to flip!"

#: flatcamEditors/FlatCAMGeoEditor.py:1312
#: flatcamEditors/FlatCAMGrbEditor.py:5291 flatcamTools/ToolTransform.py:691
msgid "Applying Flip"
msgstr "Applying Flip"

#: flatcamEditors/FlatCAMGeoEditor.py:1342
#: flatcamEditors/FlatCAMGrbEditor.py:5330 flatcamTools/ToolTransform.py:733
msgid "[success] Flip on the Y axis done ..."
msgstr "[success] Flip on the Y axis done ..."

#: flatcamEditors/FlatCAMGeoEditor.py:1345
#: flatcamEditors/FlatCAMGrbEditor.py:5338 flatcamTools/ToolTransform.py:742
msgid "[success] Flip on the X axis done ..."
msgstr "[success] Flip on the X axis done ..."

#: flatcamEditors/FlatCAMGeoEditor.py:1364
#: flatcamEditors/FlatCAMGrbEditor.py:5358
msgid "[WARNING_NOTCL] No shape selected. Please Select a shape to shear/skew!"
msgstr ""
"[WARNING_NOTCL] No shape selected. Please Select a shape to shear/skew!"

#: flatcamEditors/FlatCAMGeoEditor.py:1367
#: flatcamEditors/FlatCAMGrbEditor.py:5361 flatcamTools/ToolTransform.py:760
msgid "Applying Skew"
msgstr "Applying Skew"

#: flatcamEditors/FlatCAMGeoEditor.py:1392
#: flatcamEditors/FlatCAMGrbEditor.py:5396 flatcamTools/ToolTransform.py:791
#, python-format
msgid "[success] Skew on the %s axis done ..."
msgstr "[success] Skew on the %s axis done ..."

#: flatcamEditors/FlatCAMGeoEditor.py:1396
#: flatcamEditors/FlatCAMGrbEditor.py:5400 flatcamTools/ToolTransform.py:795
#, python-format
msgid "[ERROR_NOTCL] Due of %s, Skew action was not executed."
msgstr "[ERROR_NOTCL] Due of %s, Skew action was not executed."

#: flatcamEditors/FlatCAMGeoEditor.py:1407
#: flatcamEditors/FlatCAMGrbEditor.py:5419
msgid "[WARNING_NOTCL] No shape selected. Please Select a shape to scale!"
msgstr "[WARNING_NOTCL] No shape selected. Please Select a shape to scale!"

#: flatcamEditors/FlatCAMGeoEditor.py:1410
#: flatcamEditors/FlatCAMGrbEditor.py:5422 flatcamTools/ToolTransform.py:809
msgid "Applying Scale"
msgstr "Applying Scale"

#: flatcamEditors/FlatCAMGeoEditor.py:1443
#: flatcamEditors/FlatCAMGrbEditor.py:5460 flatcamTools/ToolTransform.py:848
#, python-format
msgid "[success] Scale on the %s axis done ..."
msgstr "[success] Scale on the %s axis done ..."

#: flatcamEditors/FlatCAMGeoEditor.py:1446
#: flatcamEditors/FlatCAMGrbEditor.py:5463 flatcamTools/ToolTransform.py:851
#, python-format
msgid "[ERROR_NOTCL] Due of %s, Scale action was not executed."
msgstr "[ERROR_NOTCL] Due of %s, Scale action was not executed."

#: flatcamEditors/FlatCAMGeoEditor.py:1455
#: flatcamEditors/FlatCAMGrbEditor.py:5476
msgid "[WARNING_NOTCL] No shape selected. Please Select a shape to offset!"
msgstr "[WARNING_NOTCL] No shape selected. Please Select a shape to offset!"

#: flatcamEditors/FlatCAMGeoEditor.py:1458
#: flatcamEditors/FlatCAMGrbEditor.py:5479 flatcamTools/ToolTransform.py:861
msgid "Applying Offset"
msgstr "Applying Offset"

#: flatcamEditors/FlatCAMGeoEditor.py:1469
#: flatcamEditors/FlatCAMGrbEditor.py:5501 flatcamTools/ToolTransform.py:880
#, python-format
msgid "[success] Offset on the %s axis done ..."
msgstr "[success] Offset on the %s axis done ..."

#: flatcamEditors/FlatCAMGeoEditor.py:1473
#: flatcamEditors/FlatCAMGrbEditor.py:5505 flatcamTools/ToolTransform.py:884
#, python-format
msgid "[ERROR_NOTCL] Due of %s, Offset action was not executed."
msgstr "[ERROR_NOTCL] Due of %s, Offset action was not executed."

#: flatcamEditors/FlatCAMGeoEditor.py:1477
#: flatcamEditors/FlatCAMGrbEditor.py:5509
msgid "Rotate ..."
msgstr "Rotate ..."

#: flatcamEditors/FlatCAMGeoEditor.py:1478
#: flatcamEditors/FlatCAMGeoEditor.py:1535
#: flatcamEditors/FlatCAMGeoEditor.py:1552
#: flatcamEditors/FlatCAMGrbEditor.py:5510
#: flatcamEditors/FlatCAMGrbEditor.py:5567
#: flatcamEditors/FlatCAMGrbEditor.py:5584
msgid "Enter an Angle Value (degrees):"
msgstr "Enter an Angle Value (degrees):"

#: flatcamEditors/FlatCAMGeoEditor.py:1487
#: flatcamEditors/FlatCAMGrbEditor.py:5519
msgid "[success] Geometry shape rotate done..."
msgstr "[success] Geometry shape rotate done..."

#: flatcamEditors/FlatCAMGeoEditor.py:1492
#: flatcamEditors/FlatCAMGrbEditor.py:5524
msgid "[WARNING_NOTCL] Geometry shape rotate cancelled..."
msgstr "[WARNING_NOTCL] Geometry shape rotate cancelled..."

#: flatcamEditors/FlatCAMGeoEditor.py:1498
#: flatcamEditors/FlatCAMGrbEditor.py:5530
msgid "Offset on X axis ..."
msgstr "Offset on X axis ..."

#: flatcamEditors/FlatCAMGeoEditor.py:1499
#: flatcamEditors/FlatCAMGeoEditor.py:1518
#: flatcamEditors/FlatCAMGrbEditor.py:5531
#: flatcamEditors/FlatCAMGrbEditor.py:5550
#, python-format
msgid "Enter a distance Value (%s):"
msgstr "Enter a distance Value (%s):"

#: flatcamEditors/FlatCAMGeoEditor.py:1508
#: flatcamEditors/FlatCAMGrbEditor.py:5540
msgid "[success] Geometry shape offset on X axis done..."
msgstr "[success] Geometry shape offset on X axis done..."

#: flatcamEditors/FlatCAMGeoEditor.py:1512
#: flatcamEditors/FlatCAMGrbEditor.py:5544
msgid "[WARNING_NOTCL] Geometry shape offset X cancelled..."
msgstr "[WARNING_NOTCL] Geometry shape offset X cancelled..."

#: flatcamEditors/FlatCAMGeoEditor.py:1517
#: flatcamEditors/FlatCAMGrbEditor.py:5549
msgid "Offset on Y axis ..."
msgstr "Offset on Y axis ..."

#: flatcamEditors/FlatCAMGeoEditor.py:1527
#: flatcamEditors/FlatCAMGrbEditor.py:5559
msgid "[success] Geometry shape offset on Y axis done..."
msgstr "[success] Geometry shape offset on Y axis done..."

#: flatcamEditors/FlatCAMGeoEditor.py:1531
#: flatcamEditors/FlatCAMGrbEditor.py:5563
msgid "[WARNING_NOTCL] Geometry shape offset Y cancelled..."
msgstr "[WARNING_NOTCL] Geometry shape offset Y cancelled..."

#: flatcamEditors/FlatCAMGeoEditor.py:1534
#: flatcamEditors/FlatCAMGrbEditor.py:5566
msgid "Skew on X axis ..."
msgstr "Skew on X axis ..."

#: flatcamEditors/FlatCAMGeoEditor.py:1544
#: flatcamEditors/FlatCAMGrbEditor.py:5576
msgid "[success] Geometry shape skew on X axis done..."
msgstr "[success] Geometry shape skew on X axis done..."

#: flatcamEditors/FlatCAMGeoEditor.py:1548
#: flatcamEditors/FlatCAMGrbEditor.py:5580
msgid "[WARNING_NOTCL] Geometry shape skew X cancelled..."
msgstr "[WARNING_NOTCL] Geometry shape skew X cancelled..."

#: flatcamEditors/FlatCAMGeoEditor.py:1551
#: flatcamEditors/FlatCAMGrbEditor.py:5583
msgid "Skew on Y axis ..."
msgstr "Skew on Y axis ..."

#: flatcamEditors/FlatCAMGeoEditor.py:1561
#: flatcamEditors/FlatCAMGrbEditor.py:5593
msgid "[success] Geometry shape skew on Y axis done..."
msgstr "[success] Geometry shape skew on Y axis done..."

#: flatcamEditors/FlatCAMGeoEditor.py:1565
#: flatcamEditors/FlatCAMGrbEditor.py:5597
msgid "[WARNING_NOTCL] Geometry shape skew Y cancelled..."
msgstr "[WARNING_NOTCL] Geometry shape skew Y cancelled..."

#: flatcamEditors/FlatCAMGeoEditor.py:1929
#: flatcamEditors/FlatCAMGeoEditor.py:1980
#: flatcamEditors/FlatCAMGrbEditor.py:1361
#: flatcamEditors/FlatCAMGrbEditor.py:1430
msgid "Click on Center point ..."
msgstr "Click on Center point ..."

#: flatcamEditors/FlatCAMGeoEditor.py:1936
#: flatcamEditors/FlatCAMGrbEditor.py:1369
msgid "Click on Perimeter point to complete ..."
msgstr "Click on Perimeter point to complete ..."

#: flatcamEditors/FlatCAMGeoEditor.py:1965
msgid "[success] Done. Adding Circle completed."
msgstr "[success] Done. Adding Circle completed."

#: flatcamEditors/FlatCAMGeoEditor.py:2000
#: flatcamEditors/FlatCAMGrbEditor.py:1462
msgid "Click on Start point ..."
msgstr "Click on Start point ..."

#: flatcamEditors/FlatCAMGeoEditor.py:2002
#: flatcamEditors/FlatCAMGrbEditor.py:1464
msgid "Click on Point3 ..."
msgstr "Click on Point3 ..."

#: flatcamEditors/FlatCAMGeoEditor.py:2004
#: flatcamEditors/FlatCAMGrbEditor.py:1466
msgid "Click on Stop point ..."
msgstr "Click on Stop point ..."

#: flatcamEditors/FlatCAMGeoEditor.py:2009
#: flatcamEditors/FlatCAMGrbEditor.py:1471
msgid "Click on Stop point to complete ..."
msgstr "Click on Stop point to complete ..."

#: flatcamEditors/FlatCAMGeoEditor.py:2011
#: flatcamEditors/FlatCAMGrbEditor.py:1473
msgid "Click on Point2 to complete ..."
msgstr "Click on Point2 to complete ..."

#: flatcamEditors/FlatCAMGeoEditor.py:2013
#: flatcamEditors/FlatCAMGrbEditor.py:1475
msgid "Click on Center point to complete ..."
msgstr "Click on Center point to complete ..."

#: flatcamEditors/FlatCAMGeoEditor.py:2025
#: flatcamEditors/FlatCAMGrbEditor.py:1487
#, python-format
msgid "Direction: %s"
msgstr "Direction: %s"

#: flatcamEditors/FlatCAMGeoEditor.py:2035
#: flatcamEditors/FlatCAMGrbEditor.py:1497
msgid "Mode: Start -> Stop -> Center. Click on Start point ..."
msgstr "Mode: Start -> Stop -> Center. Click on Start point ..."

#: flatcamEditors/FlatCAMGeoEditor.py:2038
#: flatcamEditors/FlatCAMGrbEditor.py:1500
msgid "Mode: Point1 -> Point3 -> Point2. Click on Point1 ..."
msgstr "Mode: Point1 -> Point3 -> Point2. Click on Point1 ..."

#: flatcamEditors/FlatCAMGeoEditor.py:2041
#: flatcamEditors/FlatCAMGrbEditor.py:1503
msgid "Mode: Center -> Start -> Stop. Click on Center point ..."
msgstr "Mode: Center -> Start -> Stop. Click on Center point ..."

#: flatcamEditors/FlatCAMGeoEditor.py:2179
msgid "[success] Done. Arc completed."
msgstr "[success] Done. Arc completed."

#: flatcamEditors/FlatCAMGeoEditor.py:2198
#: flatcamEditors/FlatCAMGeoEditor.py:2251
#: flatcamEditors/FlatCAMGeoEditor.py:2626
msgid "Click on 1st corner ..."
msgstr "Click on 1st corner ..."

#: flatcamEditors/FlatCAMGeoEditor.py:2204
msgid "Click on opposite corner to complete ..."
msgstr "Click on opposite corner to complete ..."

#: flatcamEditors/FlatCAMGeoEditor.py:2232
msgid "[success] Done. Rectangle completed."
msgstr "[success] Done. Rectangle completed."

#: flatcamEditors/FlatCAMGeoEditor.py:2258
msgid "Click on next Point or click right mouse button to complete ..."
msgstr "Click on next Point or click right mouse button to complete ..."

#: flatcamEditors/FlatCAMGeoEditor.py:2286
msgid "[success] Done. Polygon completed."
msgstr "[success] Done. Polygon completed."

#: flatcamEditors/FlatCAMGeoEditor.py:2296
#: flatcamEditors/FlatCAMGeoEditor.py:2342
#: flatcamEditors/FlatCAMGrbEditor.py:1058
#: flatcamEditors/FlatCAMGrbEditor.py:1252
msgid "Backtracked one point ..."
msgstr "Backtracked one point ..."

#: flatcamEditors/FlatCAMGeoEditor.py:2324
msgid "[success] Done. Path completed."
msgstr "[success] Done. Path completed."

#: flatcamEditors/FlatCAMGeoEditor.py:2447
msgid "[WARNING_NOTCL] MOVE: No shape selected. Select a shape to move ..."
msgstr "[WARNING_NOTCL] MOVE: No shape selected. Select a shape to move ..."

#: flatcamEditors/FlatCAMGeoEditor.py:2449
#: flatcamEditors/FlatCAMGeoEditor.py:2461
msgid " MOVE: Click on reference point ..."
msgstr " MOVE: Click on reference point ..."

#: flatcamEditors/FlatCAMGeoEditor.py:2452
msgid " Click on destination point ..."
msgstr " Click on destination point ..."

#: flatcamEditors/FlatCAMGeoEditor.py:2486
msgid "[success] Done. Geometry(s) Move completed."
msgstr "[success] Done. Geometry(s) Move completed."

#: flatcamEditors/FlatCAMGeoEditor.py:2606
msgid "[success] Done. Geometry(s) Copy completed."
msgstr "[success] Done. Geometry(s) Copy completed."

#: flatcamEditors/FlatCAMGeoEditor.py:2640
#, python-format
msgid ""
"[ERROR]Font not supported. Only Regular, Bold, Italic and BoldItalic are "
"supported. Error: %s"
msgstr ""
"[ERROR]Font not supported. Only Regular, Bold, Italic and BoldItalic are "
"supported. Error: %s"

#: flatcamEditors/FlatCAMGeoEditor.py:2650
msgid "[success] Done. Adding Text completed."
msgstr "[success] Done. Adding Text completed."

#: flatcamEditors/FlatCAMGeoEditor.py:2678
msgid "Create buffer geometry ..."
msgstr "Create buffer geometry ..."

#: flatcamEditors/FlatCAMGeoEditor.py:2689
#: flatcamEditors/FlatCAMGeoEditor.py:2715
#: flatcamEditors/FlatCAMGeoEditor.py:2741
msgid "[WARNING_NOTCL] Buffer cancelled. No shape selected."
msgstr "[WARNING_NOTCL] Buffer cancelled. No shape selected."

#: flatcamEditors/FlatCAMGeoEditor.py:2711
#: flatcamEditors/FlatCAMGrbEditor.py:4447
msgid "[success] Done. Buffer Tool completed."
msgstr "[success] Done. Buffer Tool completed."

#: flatcamEditors/FlatCAMGeoEditor.py:2737
msgid "[success] Done. Buffer Int Tool completed."
msgstr "[success] Done. Buffer Int Tool completed."

#: flatcamEditors/FlatCAMGeoEditor.py:2763
msgid "[success] Done. Buffer Ext Tool completed."
msgstr "[success] Done. Buffer Ext Tool completed."

#: flatcamEditors/FlatCAMGeoEditor.py:2798
#: flatcamEditors/FlatCAMGrbEditor.py:1983
msgid "Select a shape to act as deletion area ..."
msgstr "Select a shape to act as deletion area ..."

#: flatcamEditors/FlatCAMGeoEditor.py:2800
#: flatcamEditors/FlatCAMGeoEditor.py:2819
#: flatcamEditors/FlatCAMGeoEditor.py:2825
#: flatcamEditors/FlatCAMGrbEditor.py:1985
msgid "Click to pick-up the erase shape..."
msgstr "Click to pick-up the erase shape..."

#: flatcamEditors/FlatCAMGeoEditor.py:2829
#: flatcamEditors/FlatCAMGrbEditor.py:2042
msgid "Click to erase ..."
msgstr "Click to erase ..."

#: flatcamEditors/FlatCAMGeoEditor.py:2858
#: flatcamEditors/FlatCAMGrbEditor.py:2075
msgid "[success] Done. Eraser tool action completed."
msgstr "[success] Done. Eraser tool action completed."

#: flatcamEditors/FlatCAMGeoEditor.py:2901
msgid "Create Paint geometry ..."
msgstr "Create Paint geometry ..."

#: flatcamEditors/FlatCAMGeoEditor.py:2915
#: flatcamEditors/FlatCAMGrbEditor.py:2217
msgid "Shape transformations ..."
msgstr "Shape transformations ..."

#: flatcamEditors/FlatCAMGeoEditor.py:3419
#, python-brace-format
msgid ""
"[WARNING_NOTCL] Editing MultiGeo Geometry, tool: {tool} with diameter: {dia}"
msgstr ""
"[WARNING_NOTCL] Editing MultiGeo Geometry, tool: {tool} with diameter: {dia}"

#: flatcamEditors/FlatCAMGeoEditor.py:3796
msgid "[WARNING_NOTCL] Copy cancelled. No shape selected."
msgstr "[WARNING_NOTCL] Copy cancelled. No shape selected."

#: flatcamEditors/FlatCAMGeoEditor.py:3803 flatcamGUI/FlatCAMGUI.py:2727
#: flatcamGUI/FlatCAMGUI.py:2773 flatcamGUI/FlatCAMGUI.py:2791
#: flatcamGUI/FlatCAMGUI.py:2922 flatcamGUI/FlatCAMGUI.py:2934
#: flatcamGUI/FlatCAMGUI.py:2968
msgid "Click on target point."
msgstr "Click on target point."

#: flatcamEditors/FlatCAMGeoEditor.py:4047
#: flatcamEditors/FlatCAMGeoEditor.py:4082
msgid ""
"[WARNING_NOTCL] A selection of at least 2 geo items is required to do "
"Intersection."
msgstr ""
"[WARNING_NOTCL] A selection of at least 2 geo items is required to do "
"Intersection."

#: flatcamEditors/FlatCAMGeoEditor.py:4166
#: flatcamEditors/FlatCAMGeoEditor.py:4204
#: flatcamEditors/FlatCAMGeoEditor.py:4280
msgid ""
"[ERROR_NOTCL] Negative buffer value is not accepted. Use Buffer interior to "
"generate an 'inside' shape"
msgstr ""
"[ERROR_NOTCL] Negative buffer value is not accepted. Use Buffer interior to "
"generate an 'inside' shape"

#: flatcamEditors/FlatCAMGeoEditor.py:4175
#: flatcamEditors/FlatCAMGeoEditor.py:4213
#: flatcamEditors/FlatCAMGeoEditor.py:4288
msgid "[WARNING_NOTCL] Nothing selected for buffering."
msgstr "[WARNING_NOTCL] Nothing selected for buffering."

#: flatcamEditors/FlatCAMGeoEditor.py:4179
#: flatcamEditors/FlatCAMGeoEditor.py:4217
#: flatcamEditors/FlatCAMGeoEditor.py:4292
msgid "[WARNING_NOTCL] Invalid distance for buffering."
msgstr "[WARNING_NOTCL] Invalid distance for buffering."

#: flatcamEditors/FlatCAMGeoEditor.py:4189
#: flatcamEditors/FlatCAMGeoEditor.py:4301
msgid ""
"[ERROR_NOTCL] Failed, the result is empty. Choose a different buffer value."
msgstr ""
"[ERROR_NOTCL] Failed, the result is empty. Choose a different buffer value."

#: flatcamEditors/FlatCAMGeoEditor.py:4197
msgid "[success] Full buffer geometry created."
msgstr "[success] Full buffer geometry created."

#: flatcamEditors/FlatCAMGeoEditor.py:4227
msgid ""
"[ERROR_NOTCL] Failed, the result is empty. Choose a smaller buffer value."
msgstr ""
"[ERROR_NOTCL] Failed, the result is empty. Choose a smaller buffer value."

#: flatcamEditors/FlatCAMGeoEditor.py:4242
msgid "[success] Interior buffer geometry created."
msgstr "[success] Interior buffer geometry created."

#: flatcamEditors/FlatCAMGeoEditor.py:4313
msgid "[success] Exterior buffer geometry created."
msgstr "[success] Exterior buffer geometry created."

#: flatcamEditors/FlatCAMGeoEditor.py:4377
msgid "[WARNING_NOTCL] Nothing selected for painting."
msgstr "[WARNING_NOTCL] Nothing selected for painting."

#: flatcamEditors/FlatCAMGeoEditor.py:4383
msgid "[WARNING] Invalid value for {}"
msgstr "[WARNING] Invalid value for {}"

#: flatcamEditors/FlatCAMGeoEditor.py:4389
msgid ""
"[ERROR_NOTCL] Could not do Paint. Overlap value has to be less than 1.00 "
"(100%)."
msgstr ""
"[ERROR_NOTCL] Could not do Paint. Overlap value has to be less than 1.00 "
"(100%)."

#: flatcamEditors/FlatCAMGeoEditor.py:4448
#, python-format
msgid ""
"[ERROR] Could not do Paint. Try a different combination of parameters. Or a "
"different method of Paint\n"
"%s"
msgstr ""
"[ERROR] Could not do Paint. Try a different combination of parameters. Or a "
"different method of Paint\n"
"%s"

#: flatcamEditors/FlatCAMGeoEditor.py:4459
msgid "[success] Paint done."
msgstr "[success] Paint done."

#: flatcamEditors/FlatCAMGrbEditor.py:200
msgid "[WARNING_NOTCL] To add an Pad first select a aperture in Aperture Table"
msgstr ""
"[WARNING_NOTCL] To add an Pad first select a aperture in Aperture Table"

#: flatcamEditors/FlatCAMGrbEditor.py:206
#: flatcamEditors/FlatCAMGrbEditor.py:398
msgid ""
"[WARNING_NOTCL] Aperture size is zero. It needs to be greater than zero."
msgstr ""
"[WARNING_NOTCL] Aperture size is zero. It needs to be greater than zero."

#: flatcamEditors/FlatCAMGrbEditor.py:357
#: flatcamEditors/FlatCAMGrbEditor.py:662
msgid ""
"Incompatible aperture type. Select an aperture with type 'C', 'R' or 'O'."
msgstr ""
"Incompatible aperture type. Select an aperture with type 'C', 'R' or 'O'."

#: flatcamEditors/FlatCAMGrbEditor.py:369
msgid "[success] Done. Adding Pad completed."
msgstr "[success] Done. Adding Pad completed."

#: flatcamEditors/FlatCAMGrbEditor.py:391
msgid ""
"[WARNING_NOTCL] To add an Pad Array first select a aperture in Aperture Table"
msgstr ""
"[WARNING_NOTCL] To add an Pad Array first select a aperture in Aperture Table"

#: flatcamEditors/FlatCAMGrbEditor.py:468
msgid "Click on the Pad Circular Array Start position"
msgstr "Click on the Pad Circular Array Start position"

#: flatcamEditors/FlatCAMGrbEditor.py:497
msgid "[ERROR_NOTCL] The value is mistyped. Check the value."
msgstr "[ERROR_NOTCL] The value is mistyped. Check the value."

#: flatcamEditors/FlatCAMGrbEditor.py:687
msgid "[WARNING_NOTCL] Too many Pads for the selected spacing angle."
msgstr "[WARNING_NOTCL] Too many Pads for the selected spacing angle."

#: flatcamEditors/FlatCAMGrbEditor.py:709
msgid "[success] Done. Pad Array added."
msgstr "[success] Done. Pad Array added."

#: flatcamEditors/FlatCAMGrbEditor.py:730
msgid "Select shape(s) and then click ..."
msgstr "Select shape(s) and then click ..."

#: flatcamEditors/FlatCAMGrbEditor.py:741
msgid "[ERROR_NOTCL] Failed. Nothing selected."
msgstr "[ERROR_NOTCL] Failed. Nothing selected."

#: flatcamEditors/FlatCAMGrbEditor.py:756
msgid ""
"[WARNING_NOTCL] Failed. Poligonize works only on geometries belonging to the "
"same aperture."
msgstr ""
"[WARNING_NOTCL] Failed. Poligonize works only on geometries belonging to the "
"same aperture."

#: flatcamEditors/FlatCAMGrbEditor.py:809
msgid "[success] Done. Poligonize completed."
msgstr "[success] Done. Poligonize completed."

#: flatcamEditors/FlatCAMGrbEditor.py:860
#: flatcamEditors/FlatCAMGrbEditor.py:1075
#: flatcamEditors/FlatCAMGrbEditor.py:1099
msgid "Corner Mode 1: 45 degrees ..."
msgstr "Corner Mode 1: 45 degrees ..."

#: flatcamEditors/FlatCAMGrbEditor.py:862
msgid "Click on 1st point ..."
msgstr "Click on 1st point ..."

#: flatcamEditors/FlatCAMGrbEditor.py:872
#: flatcamEditors/FlatCAMGrbEditor.py:1170
msgid "Click on next Point or click Right mouse button to complete ..."
msgstr "Click on next Point or click Right mouse button to complete ..."

#: flatcamEditors/FlatCAMGrbEditor.py:1063
#: flatcamEditors/FlatCAMGrbEditor.py:1096
msgid "Corner Mode 2: Reverse 45 degrees ..."
msgstr "Corner Mode 2: Reverse 45 degrees ..."

#: flatcamEditors/FlatCAMGrbEditor.py:1066
#: flatcamEditors/FlatCAMGrbEditor.py:1093
msgid "Corner Mode 3: 90 degrees ..."
msgstr "Corner Mode 3: 90 degrees ..."

#: flatcamEditors/FlatCAMGrbEditor.py:1069
#: flatcamEditors/FlatCAMGrbEditor.py:1090
msgid "Corner Mode 4: Reverse 90 degrees ..."
msgstr "Corner Mode 4: Reverse 90 degrees ..."

#: flatcamEditors/FlatCAMGrbEditor.py:1072
#: flatcamEditors/FlatCAMGrbEditor.py:1087
msgid "Corner Mode 5: Free angle ..."
msgstr "Corner Mode 5: Free angle ..."

#: flatcamEditors/FlatCAMGrbEditor.py:1126
#: flatcamEditors/FlatCAMGrbEditor.py:1284
#: flatcamEditors/FlatCAMGrbEditor.py:1323
msgid "Track Mode 1: 45 degrees ..."
msgstr "Track Mode 1: 45 degrees ..."

#: flatcamEditors/FlatCAMGrbEditor.py:1264
#: flatcamEditors/FlatCAMGrbEditor.py:1318
msgid "Track Mode 2: Reverse 45 degrees ..."
msgstr "Track Mode 2: Reverse 45 degrees ..."

#: flatcamEditors/FlatCAMGrbEditor.py:1269
#: flatcamEditors/FlatCAMGrbEditor.py:1313
msgid "Track Mode 3: 90 degrees ..."
msgstr "Track Mode 3: 90 degrees ..."

#: flatcamEditors/FlatCAMGrbEditor.py:1274
#: flatcamEditors/FlatCAMGrbEditor.py:1308
msgid "Track Mode 4: Reverse 90 degrees ..."
msgstr "Track Mode 4: Reverse 90 degrees ..."

#: flatcamEditors/FlatCAMGrbEditor.py:1279
#: flatcamEditors/FlatCAMGrbEditor.py:1303
msgid "Track Mode 5: Free angle ..."
msgstr "Track Mode 5: Free angle ..."

#: flatcamEditors/FlatCAMGrbEditor.py:1683
msgid "Scale the selected Gerber apertures ..."
msgstr "Scale the selected Gerber apertures ..."

#: flatcamEditors/FlatCAMGrbEditor.py:1725
msgid "Buffer the selected apertures ..."
msgstr "Buffer the selected apertures ..."

#: flatcamEditors/FlatCAMGrbEditor.py:1769
msgid "[WARNING_NOTCL] Nothing selected to move ..."
msgstr "[WARNING_NOTCL] Nothing selected to move ..."

#: flatcamEditors/FlatCAMGrbEditor.py:1892
msgid "[success] Done. Apertures Move completed."
msgstr "[success] Done. Apertures Move completed."

#: flatcamEditors/FlatCAMGrbEditor.py:1968
msgid "[success] Done. Apertures copied."
msgstr "[success] Done. Apertures copied."

#: flatcamEditors/FlatCAMGrbEditor.py:2259 flatcamGUI/FlatCAMGUI.py:1604
#: flatcamGUI/FlatCAMGUI.py:4323
msgid "Gerber Editor"
msgstr "Gerber Editor"

#: flatcamEditors/FlatCAMGrbEditor.py:2278 flatcamGUI/ObjectUI.py:192
msgid "<b>Apertures:</b>"
msgstr "<b>Apertures:</b>"

#: flatcamEditors/FlatCAMGrbEditor.py:2280 flatcamGUI/ObjectUI.py:194
msgid "Apertures Table for the Gerber Object."
msgstr "Apertures Table for the Gerber Object."

#: flatcamEditors/FlatCAMGrbEditor.py:2291
#: flatcamEditors/FlatCAMGrbEditor.py:3601 flatcamGUI/ObjectUI.py:228
msgid "Code"
msgstr "Code"

#: flatcamEditors/FlatCAMGrbEditor.py:2291
#: flatcamEditors/FlatCAMGrbEditor.py:3601 flatcamGUI/ObjectUI.py:228
#: flatcamGUI/ObjectUI.py:891 flatcamGUI/ObjectUI.py:1465
msgid "Type"
msgstr "Type"

#: flatcamEditors/FlatCAMGrbEditor.py:2291
#: flatcamEditors/FlatCAMGrbEditor.py:3601 flatcamGUI/ObjectUI.py:228
msgid "Size"
msgstr "Size"

#: flatcamEditors/FlatCAMGrbEditor.py:2291
#: flatcamEditors/FlatCAMGrbEditor.py:3601 flatcamGUI/ObjectUI.py:228
msgid "Dim"
msgstr "Dim"

#: flatcamEditors/FlatCAMGrbEditor.py:2295 flatcamGUI/ObjectUI.py:232
msgid "Index"
msgstr "Index"

#: flatcamEditors/FlatCAMGrbEditor.py:2297 flatcamGUI/ObjectUI.py:234
msgid "Aperture Code"
msgstr "Aperture Code"

#: flatcamEditors/FlatCAMGrbEditor.py:2299 flatcamGUI/ObjectUI.py:236
msgid "Type of aperture: circular, rectangle, macros etc"
msgstr "Type of aperture: circular, rectangle, macros etc"

#: flatcamEditors/FlatCAMGrbEditor.py:2301
#: flatcamEditors/FlatCAMGrbEditor.py:2334 flatcamGUI/ObjectUI.py:238
msgid "Aperture Size:"
msgstr "Aperture Size:"

#: flatcamEditors/FlatCAMGrbEditor.py:2303 flatcamGUI/ObjectUI.py:240
msgid ""
"Aperture Dimensions:\n"
" - (width, height) for R, O type.\n"
" - (dia, nVertices) for P type"
msgstr ""
"Aperture Dimensions:\n"
" - (width, height) for R, O type.\n"
" - (dia, nVertices) for P type"

#: flatcamEditors/FlatCAMGrbEditor.py:2324
msgid "Aperture Code:"
msgstr "Aperture Code:"

#: flatcamEditors/FlatCAMGrbEditor.py:2326
msgid "Code for the new aperture"
msgstr "Code for the new aperture"

#: flatcamEditors/FlatCAMGrbEditor.py:2336
msgid ""
"Size for the new aperture.\n"
"If aperture type is 'R' or 'O' then\n"
"this value is automatically\n"
"calculated as:\n"
"sqrt(width**2 + height**2)"
msgstr ""
"Size for the new aperture.\n"
"If aperture type is 'R' or 'O' then\n"
"this value is automatically\n"
"calculated as:\n"
"sqrt(width**2 + height**2)"

#: flatcamEditors/FlatCAMGrbEditor.py:2348
msgid "Aperture Type:"
msgstr "Aperture Type:"

#: flatcamEditors/FlatCAMGrbEditor.py:2350
msgid ""
"Select the type of new aperture. Can be:\n"
"C = circular\n"
"R = rectangular\n"
"O = oblong"
msgstr ""
"Select the type of new aperture. Can be:\n"
"C = circular\n"
"R = rectangular\n"
"O = oblong"

#: flatcamEditors/FlatCAMGrbEditor.py:2361
msgid "Aperture Dim:"
msgstr "Aperture Dim:"

#: flatcamEditors/FlatCAMGrbEditor.py:2363
msgid ""
"Dimensions for the new aperture.\n"
"Active only for rectangular apertures (type R).\n"
"The format is (width, height)"
msgstr ""
"Dimensions for the new aperture.\n"
"Active only for rectangular apertures (type R).\n"
"The format is (width, height)"

#: flatcamEditors/FlatCAMGrbEditor.py:2372
msgid "Add/Delete Aperture:"
msgstr "Add/Delete Aperture:"

#: flatcamEditors/FlatCAMGrbEditor.py:2374
msgid "Add/Delete an aperture in the aperture table"
msgstr "Add/Delete an aperture in the aperture table"

#: flatcamEditors/FlatCAMGrbEditor.py:2383
msgid "Add a new aperture to the aperture list."
msgstr "Add a new aperture to the aperture list."

#: flatcamEditors/FlatCAMGrbEditor.py:2388
msgid "Delete a aperture in the aperture list"
msgstr "Delete a aperture in the aperture list"

#: flatcamEditors/FlatCAMGrbEditor.py:2404
msgid "Buffer Aperture:"
msgstr "Buffer Aperture:"

#: flatcamEditors/FlatCAMGrbEditor.py:2406
msgid "Buffer a aperture in the aperture list"
msgstr "Buffer a aperture in the aperture list"

#: flatcamEditors/FlatCAMGrbEditor.py:2419
msgid ""
"There are 3 types of corners:\n"
" - 'Round': the corner is rounded.\n"
" - 'Square:' the corner is met in a sharp angle.\n"
" - 'Beveled:' the corner is a line that directly connects the features "
"meeting in the corner"
msgstr ""
"There are 3 types of corners:\n"
" - 'Round': the corner is rounded.\n"
" - 'Square:' the corner is met in a sharp angle.\n"
" - 'Beveled:' the corner is a line that directly connects the features "
"meeting in the corner"

#: flatcamEditors/FlatCAMGrbEditor.py:2434 flatcamGUI/FlatCAMGUI.py:717
#: flatcamGUI/FlatCAMGUI.py:1946
msgid "Buffer"
msgstr "Buffer"

#: flatcamEditors/FlatCAMGrbEditor.py:2448
msgid "Scale Aperture:"
msgstr "Scale Aperture:"

#: flatcamEditors/FlatCAMGrbEditor.py:2450
msgid "Scale a aperture in the aperture list"
msgstr "Scale a aperture in the aperture list"

#: flatcamEditors/FlatCAMGrbEditor.py:2458
msgid "Scale factor:"
msgstr "Scale factor:"

#: flatcamEditors/FlatCAMGrbEditor.py:2460
msgid ""
"The factor by which to scale the selected aperture.\n"
"Values can be between 0.0000 and 999.9999"
msgstr ""
"The factor by which to scale the selected aperture.\n"
"Values can be between 0.0000 and 999.9999"

#: flatcamEditors/FlatCAMGrbEditor.py:2488 flatcamGUI/FlatCAMGUI.py:707
#: flatcamGUI/FlatCAMGUI.py:1936
msgid "Add Pad Array"
msgstr "Add Pad Array"

#: flatcamEditors/FlatCAMGrbEditor.py:2490
msgid "Add an array of pads (linear or circular array)"
msgstr "Add an array of pads (linear or circular array)"

#: flatcamEditors/FlatCAMGrbEditor.py:2496
msgid ""
"Select the type of pads array to create.\n"
"It can be Linear X(Y) or Circular"
msgstr ""
"Select the type of pads array to create.\n"
"It can be Linear X(Y) or Circular"

#: flatcamEditors/FlatCAMGrbEditor.py:2507
msgid "Nr of pads:"
msgstr "Nr of pads:"

#: flatcamEditors/FlatCAMGrbEditor.py:2509
msgid "Specify how many pads to be in the array."
msgstr "Specify how many pads to be in the array."

#: flatcamEditors/FlatCAMGrbEditor.py:2986
#: flatcamEditors/FlatCAMGrbEditor.py:2990
msgid ""
"[WARNING_NOTCL] Aperture code value is missing or wrong format. Add it and "
"retry."
msgstr ""
"[WARNING_NOTCL] Aperture code value is missing or wrong format. Add it and "
"retry."

#: flatcamEditors/FlatCAMGrbEditor.py:3026
msgid ""
"[WARNING_NOTCL] Aperture dimensions value is missing or wrong format. Add it "
"in format (width, height) and retry."
msgstr ""
"[WARNING_NOTCL] Aperture dimensions value is missing or wrong format. Add it "
"in format (width, height) and retry."

#: flatcamEditors/FlatCAMGrbEditor.py:3038
msgid ""
"[WARNING_NOTCL] Aperture size value is missing or wrong format. Add it and "
"retry."
msgstr ""
"[WARNING_NOTCL] Aperture size value is missing or wrong format. Add it and "
"retry."

#: flatcamEditors/FlatCAMGrbEditor.py:3049
msgid "[WARNING_NOTCL] Aperture already in the aperture table."
msgstr "[WARNING_NOTCL] Aperture already in the aperture table."

#: flatcamEditors/FlatCAMGrbEditor.py:3056
#, python-brace-format
msgid "[success] Added new aperture with code: {apid}"
msgstr "[success] Added new aperture with code: {apid}"

#: flatcamEditors/FlatCAMGrbEditor.py:3084
msgid "[WARNING_NOTCL] Select an aperture in Aperture Table"
msgstr "[WARNING_NOTCL] Select an aperture in Aperture Table"

#: flatcamEditors/FlatCAMGrbEditor.py:3090
#, python-format
msgid "[WARNING_NOTCL] Select an aperture in Aperture Table --> %s"
msgstr "[WARNING_NOTCL] Select an aperture in Aperture Table --> %s"

#: flatcamEditors/FlatCAMGrbEditor.py:3113
#, python-brace-format
msgid "[success] Deleted aperture with code: {del_dia}"
msgstr "[success] Deleted aperture with code: {del_dia}"

#: flatcamEditors/FlatCAMGrbEditor.py:3533
#, python-format
msgid "Adding aperture: %s geo ..."
msgstr "Adding aperture: %s geo ..."

#: flatcamEditors/FlatCAMGrbEditor.py:3718
msgid ""
"[ERROR_NOTCL] There are no Aperture definitions in the file. Aborting Gerber "
"creation."
msgstr ""
"[ERROR_NOTCL] There are no Aperture definitions in the file. Aborting Gerber "
"creation."

#: flatcamEditors/FlatCAMGrbEditor.py:3721
msgid "[ERROR] An internal error has occurred. See shell.\n"
msgstr "[ERROR] An internal error has occurred. See shell.\n"

#: flatcamEditors/FlatCAMGrbEditor.py:3726
msgid "Creating Gerber."
msgstr "Creating Gerber."

#: flatcamEditors/FlatCAMGrbEditor.py:3734
msgid "[success] Gerber editing finished."
msgstr "[success] Gerber editing finished."

#: flatcamEditors/FlatCAMGrbEditor.py:3750
msgid "[WARNING_NOTCL] Cancelled. No aperture is selected"
msgstr "[WARNING_NOTCL] Cancelled. No aperture is selected"

#: flatcamEditors/FlatCAMGrbEditor.py:4280
msgid "[ERROR_NOTCL] Failed. No aperture geometry is selected."
msgstr "[ERROR_NOTCL] Failed. No aperture geometry is selected."

#: flatcamEditors/FlatCAMGrbEditor.py:4288
msgid "[success] Done. Apertures geometry deleted."
msgstr "[success] Done. Apertures geometry deleted."

#: flatcamEditors/FlatCAMGrbEditor.py:4431
msgid ""
"[WARNING_NOTCL] No aperture to buffer. Select at least one aperture and try "
"again."
msgstr ""
"[WARNING_NOTCL] No aperture to buffer. Select at least one aperture and try "
"again."

#: flatcamEditors/FlatCAMGrbEditor.py:4444
#, python-format
msgid ""
"[ERROR_NOTCL] Failed.\n"
"%s"
msgstr ""
"[ERROR_NOTCL] Failed.\n"
"%s"

#: flatcamEditors/FlatCAMGrbEditor.py:4461
msgid ""
"[WARNING_NOTCL] Scale factor value is missing or wrong format. Add it and "
"retry."
msgstr ""
"[WARNING_NOTCL] Scale factor value is missing or wrong format. Add it and "
"retry."

#: flatcamEditors/FlatCAMGrbEditor.py:4494
msgid ""
"[WARNING_NOTCL] No aperture to scale. Select at least one aperture and try "
"again."
msgstr ""
"[WARNING_NOTCL] No aperture to scale. Select at least one aperture and try "
"again."

#: flatcamEditors/FlatCAMGrbEditor.py:4510
msgid "[success] Done. Scale Tool completed."
msgstr "[success] Done. Scale Tool completed."

#: flatcamGUI/FlatCAMGUI.py:50
msgid "&File"
msgstr "&File"

#: flatcamGUI/FlatCAMGUI.py:55
msgid "&New Project ...\tCTRL+N"
msgstr "&New Project ...\tCTRL+N"

#: flatcamGUI/FlatCAMGUI.py:57
msgid "Will create a new, blank project"
msgstr "Will create a new, blank project"

#: flatcamGUI/FlatCAMGUI.py:62
msgid "&New"
msgstr "&New"

#: flatcamGUI/FlatCAMGUI.py:65
msgid "Geometry\tN"
msgstr "Geometry\tN"

#: flatcamGUI/FlatCAMGUI.py:67
msgid "Will create a new, empty Geometry Object."
msgstr "Will create a new, empty Geometry Object."

#: flatcamGUI/FlatCAMGUI.py:69
msgid "Gerber\tB"
msgstr "Gerber\tB"

#: flatcamGUI/FlatCAMGUI.py:71
msgid "Will create a new, empty Gerber Object."
msgstr "Will create a new, empty Gerber Object."

#: flatcamGUI/FlatCAMGUI.py:73
msgid "Excellon\tL"
msgstr "Excellon\tL"

#: flatcamGUI/FlatCAMGUI.py:75
msgid "Will create a new, empty Excellon Object."
msgstr "Will create a new, empty Excellon Object."

#: flatcamGUI/FlatCAMGUI.py:78 flatcamTools/ToolPcbWizard.py:63
#: flatcamTools/ToolPcbWizard.py:71
msgid "Open"
msgstr "Open"

#: flatcamGUI/FlatCAMGUI.py:83
msgid "Open &Gerber ...\tCTRL+G"
msgstr "Open &Gerber ...\tCTRL+G"

#: flatcamGUI/FlatCAMGUI.py:90
msgid "Open &Excellon ...\tCTRL+E"
msgstr "Open &Excellon ...\tCTRL+E"

#: flatcamGUI/FlatCAMGUI.py:95
msgid "Open G-&Code ..."
msgstr "Open G-&Code ..."

#: flatcamGUI/FlatCAMGUI.py:99
msgid "Open &Project ..."
msgstr "Open &Project ..."

#: flatcamGUI/FlatCAMGUI.py:105
msgid "Open Config ..."
msgstr "Open Config ..."

#: flatcamGUI/FlatCAMGUI.py:109
msgid "Recent files"
msgstr "Recent files"

#: flatcamGUI/FlatCAMGUI.py:115
msgid "Scripting"
msgstr "Scripting"

#: flatcamGUI/FlatCAMGUI.py:118
msgid "New Script ..."
msgstr "New Script ..."

#: flatcamGUI/FlatCAMGUI.py:120
msgid "Open Script ..."
msgstr "Open Script ..."

#: flatcamGUI/FlatCAMGUI.py:122
msgid "Run Script ...\tSHIFT+S"
msgstr "Run Script ...\tSHIFT+S"

#: flatcamGUI/FlatCAMGUI.py:125
msgid ""
"Will run the opened Tcl Script thus\n"
"enabling the automation of certain\n"
"functions of FlatCAM."
msgstr ""
"Will run the opened Tcl Script thus\n"
"enabling the automation of certain\n"
"functions of FlatCAM."

#: flatcamGUI/FlatCAMGUI.py:138
msgid "Import"
msgstr "Import"

#: flatcamGUI/FlatCAMGUI.py:140
msgid "&SVG as Geometry Object ..."
msgstr "&SVG as Geometry Object ..."

#: flatcamGUI/FlatCAMGUI.py:143
msgid "&SVG as Gerber Object ..."
msgstr "&SVG as Gerber Object ..."

#: flatcamGUI/FlatCAMGUI.py:148
msgid "&DXF as Geometry Object ..."
msgstr "&DXF as Geometry Object ..."

#: flatcamGUI/FlatCAMGUI.py:151
msgid "&DXF as Gerber Object ..."
msgstr "&DXF as Gerber Object ..."

#: flatcamGUI/FlatCAMGUI.py:156
msgid "Export"
msgstr "Export"

#: flatcamGUI/FlatCAMGUI.py:159
msgid "Export &SVG ..."
msgstr "Export &SVG ..."

#: flatcamGUI/FlatCAMGUI.py:162
msgid "Export DXF ..."
msgstr "Export DXF ..."

#: flatcamGUI/FlatCAMGUI.py:167
msgid "Export &PNG ..."
msgstr "Export &PNG ..."

#: flatcamGUI/FlatCAMGUI.py:169
msgid ""
"Will export an image in PNG format,\n"
"the saved image will contain the visual \n"
"information currently in FlatCAM Plot Area."
msgstr ""
"Will export an image in PNG format,\n"
"the saved image will contain the visual \n"
"information currently in FlatCAM Plot Area."

#: flatcamGUI/FlatCAMGUI.py:177
msgid "Export &Excellon ..."
msgstr "Export &Excellon ..."

#: flatcamGUI/FlatCAMGUI.py:180
msgid ""
"Will export an Excellon Object as Excellon file,\n"
"the coordinates format, the file units and zeros\n"
"are set in Preferences -> Excellon Export."
msgstr ""
"Will export an Excellon Object as Excellon file,\n"
"the coordinates format, the file units and zeros\n"
"are set in Preferences -> Excellon Export."

#: flatcamGUI/FlatCAMGUI.py:186
msgid "Export &Gerber ..."
msgstr "Export &Gerber ..."

#: flatcamGUI/FlatCAMGUI.py:189
msgid ""
"Will export an Gerber Object as Gerber file,\n"
"the coordinates format, the file units and zeros\n"
"are set in Preferences -> Gerber Export."
msgstr ""
"Will export an Gerber Object as Gerber file,\n"
"the coordinates format, the file units and zeros\n"
"are set in Preferences -> Gerber Export."

#: flatcamGUI/FlatCAMGUI.py:199
msgid "Save &Defaults"
msgstr "Save &Defaults"

#: flatcamGUI/FlatCAMGUI.py:205 flatcamGUI/FlatCAMGUI.py:528
msgid "Save"
msgstr "Save"

#: flatcamGUI/FlatCAMGUI.py:208
msgid "&Save Project ..."
msgstr "&Save Project ..."

#: flatcamGUI/FlatCAMGUI.py:213
msgid "Save Project &As ...\tCTRL+S"
msgstr "Save Project &As ...\tCTRL+S"

#: flatcamGUI/FlatCAMGUI.py:217
msgid "Save Project C&opy ..."
msgstr "Save Project C&opy ..."

#: flatcamGUI/FlatCAMGUI.py:225
msgid "E&xit"
msgstr "E&xit"

#: flatcamGUI/FlatCAMGUI.py:231
msgid "&Edit"
msgstr "&Edit"

#: flatcamGUI/FlatCAMGUI.py:234
msgid "Edit Object\tE"
msgstr "Edit Object\tE"

#: flatcamGUI/FlatCAMGUI.py:235
msgid "Close Editor\tCTRL+S"
msgstr "Close Editor\tCTRL+S"

#: flatcamGUI/FlatCAMGUI.py:243
msgid "Conversion"
msgstr "Conversion"

#: flatcamGUI/FlatCAMGUI.py:245
msgid "&Join Geo/Gerber/Exc -> Geo"
msgstr "&Join Geo/Gerber/Exc -> Geo"

#: flatcamGUI/FlatCAMGUI.py:247
msgid ""
"Merge a selection of objects, which can be of type:\n"
"- Gerber\n"
"- Excellon\n"
"- Geometry\n"
"into a new combo Geometry object."
msgstr ""
"Merge a selection of objects, which can be of type:\n"
"- Gerber\n"
"- Excellon\n"
"- Geometry\n"
"into a new combo Geometry object."

#: flatcamGUI/FlatCAMGUI.py:254
msgid "Join Excellon(s) -> Excellon"
msgstr "Join Excellon(s) -> Excellon"

#: flatcamGUI/FlatCAMGUI.py:256
msgid "Merge a selection of Excellon objects into a new combo Excellon object."
msgstr ""
"Merge a selection of Excellon objects into a new combo Excellon object."

#: flatcamGUI/FlatCAMGUI.py:259
msgid "Join Gerber(s) -> Gerber"
msgstr "Join Gerber(s) -> Gerber"

#: flatcamGUI/FlatCAMGUI.py:261
msgid "Merge a selection of Gerber objects into a new combo Gerber object."
msgstr "Merge a selection of Gerber objects into a new combo Gerber object."

#: flatcamGUI/FlatCAMGUI.py:266
msgid "Convert Single to MultiGeo"
msgstr "Convert Single to MultiGeo"

#: flatcamGUI/FlatCAMGUI.py:268
msgid ""
"Will convert a Geometry object from single_geometry type\n"
"to a multi_geometry type."
msgstr ""
"Will convert a Geometry object from single_geometry type\n"
"to a multi_geometry type."

#: flatcamGUI/FlatCAMGUI.py:272
msgid "Convert Multi to SingleGeo"
msgstr "Convert Multi to SingleGeo"

#: flatcamGUI/FlatCAMGUI.py:274
msgid ""
"Will convert a Geometry object from multi_geometry type\n"
"to a single_geometry type."
msgstr ""
"Will convert a Geometry object from multi_geometry type\n"
"to a single_geometry type."

#: flatcamGUI/FlatCAMGUI.py:280
msgid "Convert Any to Geo"
msgstr "Convert Any to Geo"

#: flatcamGUI/FlatCAMGUI.py:282
msgid "Convert Any to Gerber"
msgstr "Convert Any to Gerber"

#: flatcamGUI/FlatCAMGUI.py:287
msgid "&Copy\tCTRL+C"
msgstr "&Copy\tCTRL+C"

#: flatcamGUI/FlatCAMGUI.py:291
msgid "&Delete\tDEL"
msgstr "&Delete\tDEL"

#: flatcamGUI/FlatCAMGUI.py:295
msgid "Se&t Origin\tO"
msgstr "Se&t Origin\tO"

#: flatcamGUI/FlatCAMGUI.py:296
msgid "Jump to Location\tJ"
msgstr "Jump to Location\tJ"

#: flatcamGUI/FlatCAMGUI.py:301
msgid "Toggle Units\tQ"
msgstr "Toggle Units\tQ"

#: flatcamGUI/FlatCAMGUI.py:303
msgid "&Select All\tCTRL+A"
msgstr "&Select All\tCTRL+A"

#: flatcamGUI/FlatCAMGUI.py:307
msgid "&Preferences\tSHIFT+P"
msgstr "&Preferences\tSHIFT+P"

#: flatcamGUI/FlatCAMGUI.py:310
msgid "&Options"
msgstr "&Options"

#: flatcamGUI/FlatCAMGUI.py:325
msgid "&Rotate Selection\tSHIFT+(R)"
msgstr "&Rotate Selection\tSHIFT+(R)"

#: flatcamGUI/FlatCAMGUI.py:330
msgid "&Skew on X axis\tSHIFT+X"
msgstr "&Skew on X axis\tSHIFT+X"

#: flatcamGUI/FlatCAMGUI.py:332
msgid "S&kew on Y axis\tSHIFT+Y"
msgstr "S&kew on Y axis\tSHIFT+Y"

#: flatcamGUI/FlatCAMGUI.py:337
msgid "Flip on &X axis\tX"
msgstr "Flip on &X axis\tX"

#: flatcamGUI/FlatCAMGUI.py:339
msgid "Flip on &Y axis\tY"
msgstr "Flip on &Y axis\tY"

#: flatcamGUI/FlatCAMGUI.py:344
msgid "View source\tALT+S"
msgstr "View source\tALT+S"

#: flatcamGUI/FlatCAMGUI.py:349
msgid "&View"
msgstr "&View"

#: flatcamGUI/FlatCAMGUI.py:350
msgid "Enable all plots\tALT+1"
msgstr "Enable all plots\tALT+1"

#: flatcamGUI/FlatCAMGUI.py:352
msgid "Disable all plots\tALT+2"
msgstr "Disable all plots\tALT+2"

#: flatcamGUI/FlatCAMGUI.py:354
msgid "Disable non-selected\tALT+3"
msgstr "Disable non-selected\tALT+3"

#: flatcamGUI/FlatCAMGUI.py:357
msgid "&Zoom Fit\tV"
msgstr "&Zoom Fit\tV"

#: flatcamGUI/FlatCAMGUI.py:358
msgid "&Zoom In\t="
msgstr "&Zoom In\t="

#: flatcamGUI/FlatCAMGUI.py:359
msgid "&Zoom Out\t-"
msgstr "&Zoom Out\t-"

#: flatcamGUI/FlatCAMGUI.py:363
msgid "Toggle Code Editor\tCTRL+E"
msgstr "Toggle Code Editor\tCTRL+E"

#: flatcamGUI/FlatCAMGUI.py:366
msgid "&Toggle FullScreen\tALT+F10"
msgstr "&Toggle FullScreen\tALT+F10"

#: flatcamGUI/FlatCAMGUI.py:368
msgid "&Toggle Plot Area\tCTRL+F10"
msgstr "&Toggle Plot Area\tCTRL+F10"

#: flatcamGUI/FlatCAMGUI.py:370
msgid "&Toggle Project/Sel/Tool\t`"
msgstr "&Toggle Project/Sel/Tool\t`"

#: flatcamGUI/FlatCAMGUI.py:373
msgid "&Toggle Grid Snap\tG"
msgstr "&Toggle Grid Snap\tG"

#: flatcamGUI/FlatCAMGUI.py:375
msgid "&Toggle Axis\tSHIFT+G"
msgstr "&Toggle Axis\tSHIFT+G"

#: flatcamGUI/FlatCAMGUI.py:378
msgid "Toggle Workspace\tSHIFT+W"
msgstr "Toggle Workspace\tSHIFT+W"

#: flatcamGUI/FlatCAMGUI.py:381
msgid "&Tool"
msgstr "&Tool"

#: flatcamGUI/FlatCAMGUI.py:383
msgid "&Command Line\tS"
msgstr "&Command Line\tS"

#: flatcamGUI/FlatCAMGUI.py:386
msgid "&Help"
msgstr "&Help"

#: flatcamGUI/FlatCAMGUI.py:387
msgid "Help\tF1"
msgstr "Help\tF1"

#: flatcamGUI/FlatCAMGUI.py:388
msgid "FlatCAM.org"
msgstr "FlatCAM.org"

#: flatcamGUI/FlatCAMGUI.py:391
msgid "Shortcuts List\tF3"
msgstr "Shortcuts List\tF3"

#: flatcamGUI/FlatCAMGUI.py:392
msgid "YouTube Channel\tF4"
msgstr "YouTube Channel\tF4"

#: flatcamGUI/FlatCAMGUI.py:394
msgid "About"
msgstr "About"

#: flatcamGUI/FlatCAMGUI.py:401
msgid "Add Circle\tO"
msgstr "Add Circle\tO"

#: flatcamGUI/FlatCAMGUI.py:403
msgid "Add Arc\tA"
msgstr "Add Arc\tA"

#: flatcamGUI/FlatCAMGUI.py:406
msgid "Add Rectangle\tR"
msgstr "Add Rectangle\tR"

#: flatcamGUI/FlatCAMGUI.py:409
msgid "Add Polygon\tN"
msgstr "Add Polygon\tN"

#: flatcamGUI/FlatCAMGUI.py:411
msgid "Add Path\tP"
msgstr "Add Path\tP"

#: flatcamGUI/FlatCAMGUI.py:413
msgid "Add Text\tT"
msgstr "Add Text\tT"

#: flatcamGUI/FlatCAMGUI.py:416
msgid "Polygon Union\tU"
msgstr "Polygon Union\tU"

#: flatcamGUI/FlatCAMGUI.py:418
msgid "Polygon Intersection\tE"
msgstr "Polygon Intersection\tE"

#: flatcamGUI/FlatCAMGUI.py:420
msgid "Polygon Subtraction\tS"
msgstr "Polygon Subtraction\tS"

#: flatcamGUI/FlatCAMGUI.py:424
msgid "Cut Path\tX"
msgstr "Cut Path\tX"

#: flatcamGUI/FlatCAMGUI.py:426
msgid "Copy Geom\tC"
msgstr "Copy Geom\tC"

#: flatcamGUI/FlatCAMGUI.py:428
msgid "Delete Shape\tDEL"
msgstr "Delete Shape\tDEL"

#: flatcamGUI/FlatCAMGUI.py:431 flatcamGUI/FlatCAMGUI.py:503
msgid "Move\tM"
msgstr "Move\tM"

#: flatcamGUI/FlatCAMGUI.py:433
msgid "Buffer Tool\tB"
msgstr "Buffer Tool\tB"

#: flatcamGUI/FlatCAMGUI.py:436
msgid "Paint Tool\tI"
msgstr "Paint Tool\tI"

#: flatcamGUI/FlatCAMGUI.py:439
msgid "Transform Tool\tALT+R"
msgstr "Transform Tool\tALT+R"

#: flatcamGUI/FlatCAMGUI.py:443
msgid "Toggle Corner Snap\tK"
msgstr "Toggle Corner Snap\tK"

#: flatcamGUI/FlatCAMGUI.py:446
msgid ">Excellon Editor<"
msgstr ">Excellon Editor<"

#: flatcamGUI/FlatCAMGUI.py:450
msgid "Add Drill Array\tA"
msgstr "Add Drill Array\tA"

#: flatcamGUI/FlatCAMGUI.py:452
msgid "Add Drill\tD"
msgstr "Add Drill\tD"

#: flatcamGUI/FlatCAMGUI.py:456
msgid "Resize Drill(S)\tR"
msgstr "Resize Drill(S)\tR"

#: flatcamGUI/FlatCAMGUI.py:458 flatcamGUI/FlatCAMGUI.py:496
msgid "Copy\tC"
msgstr "Copy\tC"

#: flatcamGUI/FlatCAMGUI.py:460 flatcamGUI/FlatCAMGUI.py:498
msgid "Delete\tDEL"
msgstr "Delete\tDEL"

#: flatcamGUI/FlatCAMGUI.py:465
msgid "Move Drill(s)\tM"
msgstr "Move Drill(s)\tM"

#: flatcamGUI/FlatCAMGUI.py:468
msgid ">Gerber Editor<"
msgstr ">Gerber Editor<"

#: flatcamGUI/FlatCAMGUI.py:472
msgid "Add Pad\tP"
msgstr "Add Pad\tP"

#: flatcamGUI/FlatCAMGUI.py:474
msgid "Add Pad Array\tA"
msgstr "Add Pad Array\tA"

#: flatcamGUI/FlatCAMGUI.py:476
msgid "Add Track\tT"
msgstr "Add Track\tT"

#: flatcamGUI/FlatCAMGUI.py:478
msgid "Add Region\tN"
msgstr "Add Region\tN"

#: flatcamGUI/FlatCAMGUI.py:482
msgid "Poligonize\tALT+N"
msgstr "Poligonize\tALT+N"

#: flatcamGUI/FlatCAMGUI.py:484
msgid "Add SemiDisc\tE"
msgstr "Add SemiDisc\tE"

#: flatcamGUI/FlatCAMGUI.py:486
msgid "Add Disc\tD"
msgstr "Add Disc\tD"

#: flatcamGUI/FlatCAMGUI.py:488
msgid "Buffer\tB"
msgstr "Buffer\tB"

#: flatcamGUI/FlatCAMGUI.py:490
msgid "Scale\tS"
msgstr "Scale\tS"

#: flatcamGUI/FlatCAMGUI.py:492
msgid "Transform\tALT+R"
msgstr "Transform\tALT+R"

#: flatcamGUI/FlatCAMGUI.py:519
msgid "Enable Plot"
msgstr "Enable Plot"

#: flatcamGUI/FlatCAMGUI.py:520 flatcamGUI/FlatCAMGUI.py:1577
msgid "Disable Plot"
msgstr "Disable Plot"

#: flatcamGUI/FlatCAMGUI.py:522
msgid "Generate CNC"
msgstr "Generate CNC"

#: flatcamGUI/FlatCAMGUI.py:523
msgid "View Source"
msgstr "View Source"

#: flatcamGUI/FlatCAMGUI.py:525 flatcamGUI/FlatCAMGUI.py:1617
msgid "Edit"
msgstr "Edit"

#: flatcamGUI/FlatCAMGUI.py:531 flatcamGUI/FlatCAMGUI.py:1623
#: flatcamTools/ToolProperties.py:25
msgid "Properties"
msgstr "Properties"

#: flatcamGUI/FlatCAMGUI.py:560
msgid "File Toolbar"
msgstr "File Toolbar"

#: flatcamGUI/FlatCAMGUI.py:564
msgid "Edit Toolbar"
msgstr "Edit Toolbar"

#: flatcamGUI/FlatCAMGUI.py:568
msgid "View Toolbar"
msgstr "View Toolbar"

#: flatcamGUI/FlatCAMGUI.py:572
msgid "Shell Toolbar"
msgstr "Shell Toolbar"

#: flatcamGUI/FlatCAMGUI.py:576
msgid "Tools Toolbar"
msgstr "Tools Toolbar"

#: flatcamGUI/FlatCAMGUI.py:580
msgid "Excellon Editor Toolbar"
msgstr "Excellon Editor Toolbar"

#: flatcamGUI/FlatCAMGUI.py:584
msgid "Geometry Editor Toolbar"
msgstr "Geometry Editor Toolbar"

#: flatcamGUI/FlatCAMGUI.py:588
msgid "Gerber Editor Toolbar"
msgstr "Gerber Editor Toolbar"

#: flatcamGUI/FlatCAMGUI.py:592
msgid "Grid Toolbar"
msgstr "Grid Toolbar"

#: flatcamGUI/FlatCAMGUI.py:611 flatcamGUI/FlatCAMGUI.py:1835
msgid "Open project"
msgstr "Open project"

#: flatcamGUI/FlatCAMGUI.py:612 flatcamGUI/FlatCAMGUI.py:1836
msgid "Save project"
msgstr "Save project"

#: flatcamGUI/FlatCAMGUI.py:615 flatcamGUI/FlatCAMGUI.py:1839
msgid "New Blank Geometry"
msgstr "New Blank Geometry"

#: flatcamGUI/FlatCAMGUI.py:616
msgid "New Blank Gerber"
msgstr "New Blank Gerber"

#: flatcamGUI/FlatCAMGUI.py:617 flatcamGUI/FlatCAMGUI.py:1840
msgid "New Blank Excellon"
msgstr "New Blank Excellon"

#: flatcamGUI/FlatCAMGUI.py:619 flatcamGUI/FlatCAMGUI.py:1842
msgid "Editor"
msgstr "Editor"

#: flatcamGUI/FlatCAMGUI.py:621 flatcamGUI/FlatCAMGUI.py:1844
msgid "Save Object and close the Editor"
msgstr "Save Object and close the Editor"

#: flatcamGUI/FlatCAMGUI.py:625 flatcamGUI/FlatCAMGUI.py:1848
msgid "&Delete"
msgstr "&Delete"

#: flatcamGUI/FlatCAMGUI.py:628 flatcamGUI/FlatCAMGUI.py:1851
msgid "&Replot"
msgstr "&Replot"

#: flatcamGUI/FlatCAMGUI.py:629 flatcamGUI/FlatCAMGUI.py:1852
msgid "&Clear plot"
msgstr "&Clear plot"

#: flatcamGUI/FlatCAMGUI.py:630 flatcamGUI/FlatCAMGUI.py:1853
msgid "Zoom In"
msgstr "Zoom In"

#: flatcamGUI/FlatCAMGUI.py:631 flatcamGUI/FlatCAMGUI.py:1854
msgid "Zoom Out"
msgstr "Zoom Out"

#: flatcamGUI/FlatCAMGUI.py:632 flatcamGUI/FlatCAMGUI.py:1592
#: flatcamGUI/FlatCAMGUI.py:1855
msgid "Zoom Fit"
msgstr "Zoom Fit"

#: flatcamGUI/FlatCAMGUI.py:637 flatcamGUI/FlatCAMGUI.py:1860
msgid "&Command Line"
msgstr "&Command Line"

#: flatcamGUI/FlatCAMGUI.py:640 flatcamGUI/FlatCAMGUI.py:1863
msgid "2Sided Tool"
msgstr "2Sided Tool"

#: flatcamGUI/FlatCAMGUI.py:641 flatcamGUI/FlatCAMGUI.py:1864
msgid "&Cutout Tool"
msgstr "&Cutout Tool"

#: flatcamGUI/FlatCAMGUI.py:642 flatcamGUI/FlatCAMGUI.py:1865
#: flatcamGUI/ObjectUI.py:392 flatcamTools/ToolNonCopperClear.py:285
msgid "NCC Tool"
msgstr "NCC Tool"

#: flatcamGUI/FlatCAMGUI.py:646 flatcamGUI/FlatCAMGUI.py:1869
msgid "Panel Tool"
msgstr "Panel Tool"

#: flatcamGUI/FlatCAMGUI.py:647 flatcamGUI/FlatCAMGUI.py:1870
#: flatcamTools/ToolFilm.py:204
msgid "Film Tool"
msgstr "Film Tool"

#: flatcamGUI/FlatCAMGUI.py:648 flatcamGUI/FlatCAMGUI.py:1872
#: flatcamTools/ToolSolderPaste.py:451
msgid "SolderPaste Tool"
msgstr "SolderPaste Tool"

#: flatcamGUI/FlatCAMGUI.py:649 flatcamGUI/FlatCAMGUI.py:1873
#: flatcamTools/ToolSub.py:26
msgid "Substract Tool"
msgstr "Substract Tool"

#: flatcamGUI/FlatCAMGUI.py:653 flatcamGUI/FlatCAMGUI.py:1878
msgid "Calculators Tool"
msgstr "Calculators Tool"

#: flatcamGUI/FlatCAMGUI.py:657 flatcamGUI/FlatCAMGUI.py:671
#: flatcamGUI/FlatCAMGUI.py:705 flatcamGUI/FlatCAMGUI.py:1882
#: flatcamGUI/FlatCAMGUI.py:1934
msgid "Select"
msgstr "Select"

#: flatcamGUI/FlatCAMGUI.py:658 flatcamGUI/FlatCAMGUI.py:1883
msgid "Add Drill Hole"
msgstr "Add Drill Hole"

#: flatcamGUI/FlatCAMGUI.py:660 flatcamGUI/FlatCAMGUI.py:1885
msgid "Add Drill Hole Array"
msgstr "Add Drill Hole Array"

#: flatcamGUI/FlatCAMGUI.py:661 flatcamGUI/FlatCAMGUI.py:1886
msgid "Resize Drill"
msgstr "Resize Drill"

#: flatcamGUI/FlatCAMGUI.py:664 flatcamGUI/FlatCAMGUI.py:1889
msgid "Copy Drill"
msgstr "Copy Drill"

#: flatcamGUI/FlatCAMGUI.py:665 flatcamGUI/FlatCAMGUI.py:1891
msgid "Delete Drill"
msgstr "Delete Drill"

#: flatcamGUI/FlatCAMGUI.py:668 flatcamGUI/FlatCAMGUI.py:1894
msgid "Move Drill"
msgstr "Move Drill"

#: flatcamGUI/FlatCAMGUI.py:672 flatcamGUI/FlatCAMGUI.py:1898
msgid "Add Circle"
msgstr "Add Circle"

#: flatcamGUI/FlatCAMGUI.py:673 flatcamGUI/FlatCAMGUI.py:1899
msgid "Add Arc"
msgstr "Add Arc"

#: flatcamGUI/FlatCAMGUI.py:675 flatcamGUI/FlatCAMGUI.py:1901
msgid "Add Rectangle"
msgstr "Add Rectangle"

#: flatcamGUI/FlatCAMGUI.py:678 flatcamGUI/FlatCAMGUI.py:1904
msgid "Add Path"
msgstr "Add Path"

#: flatcamGUI/FlatCAMGUI.py:679 flatcamGUI/FlatCAMGUI.py:1906
msgid "Add Polygon"
msgstr "Add Polygon"

#: flatcamGUI/FlatCAMGUI.py:681 flatcamGUI/FlatCAMGUI.py:1908
msgid "Add Text"
msgstr "Add Text"

#: flatcamGUI/FlatCAMGUI.py:682 flatcamGUI/FlatCAMGUI.py:1910
msgid "Add Buffer"
msgstr "Add Buffer"

#: flatcamGUI/FlatCAMGUI.py:683 flatcamGUI/FlatCAMGUI.py:1911
msgid "Paint Shape"
msgstr "Paint Shape"

#: flatcamGUI/FlatCAMGUI.py:684 flatcamGUI/FlatCAMGUI.py:719
#: flatcamGUI/FlatCAMGUI.py:1912 flatcamGUI/FlatCAMGUI.py:1948
msgid "Eraser"
msgstr "Eraser"

#: flatcamGUI/FlatCAMGUI.py:687 flatcamGUI/FlatCAMGUI.py:1916
msgid "Polygon Union"
msgstr "Polygon Union"

#: flatcamGUI/FlatCAMGUI.py:689 flatcamGUI/FlatCAMGUI.py:1918
msgid "Polygon Intersection"
msgstr "Polygon Intersection"

#: flatcamGUI/FlatCAMGUI.py:691 flatcamGUI/FlatCAMGUI.py:1920
msgid "Polygon Subtraction"
msgstr "Polygon Subtraction"

#: flatcamGUI/FlatCAMGUI.py:694 flatcamGUI/FlatCAMGUI.py:1923
msgid "Cut Path"
msgstr "Cut Path"

#: flatcamGUI/FlatCAMGUI.py:695
msgid "Copy Shape(s)"
msgstr "Copy Shape(s)"

#: flatcamGUI/FlatCAMGUI.py:698
msgid "Delete Shape '-'"
msgstr "Delete Shape '-'"

#: flatcamGUI/FlatCAMGUI.py:700 flatcamGUI/FlatCAMGUI.py:726
#: flatcamGUI/FlatCAMGUI.py:1928 flatcamGUI/FlatCAMGUI.py:1955
msgid "Transformations"
msgstr "Transformations"

#: flatcamGUI/FlatCAMGUI.py:702
msgid "Move Objects "
msgstr "Move Objects "

#: flatcamGUI/FlatCAMGUI.py:706 flatcamGUI/FlatCAMGUI.py:1935
msgid "Add Pad"
msgstr "Add Pad"

#: flatcamGUI/FlatCAMGUI.py:708 flatcamGUI/FlatCAMGUI.py:1937
msgid "Add Track"
msgstr "Add Track"

#: flatcamGUI/FlatCAMGUI.py:709 flatcamGUI/FlatCAMGUI.py:1938
msgid "Add Region"
msgstr "Add Region"

#: flatcamGUI/FlatCAMGUI.py:711 flatcamGUI/FlatCAMGUI.py:1940
msgid "Poligonize"
msgstr "Poligonize"

#: flatcamGUI/FlatCAMGUI.py:713 flatcamGUI/FlatCAMGUI.py:1942
msgid "SemiDisc"
msgstr "SemiDisc"

#: flatcamGUI/FlatCAMGUI.py:714 flatcamGUI/FlatCAMGUI.py:1943
msgid "Disc"
msgstr "Disc"

#: flatcamGUI/FlatCAMGUI.py:728 flatcamGUI/FlatCAMGUI.py:1602
#: flatcamGUI/FlatCAMGUI.py:1622 flatcamGUI/FlatCAMGUI.py:1957
#: flatcamTools/ToolMove.py:26
msgid "Move"
msgstr "Move"

#: flatcamGUI/FlatCAMGUI.py:734 flatcamGUI/FlatCAMGUI.py:1963
msgid "Snap to grid"
msgstr "Snap to grid"

#: flatcamGUI/FlatCAMGUI.py:737 flatcamGUI/FlatCAMGUI.py:1966
msgid "Grid X snapping distance"
msgstr "Grid X snapping distance"

#: flatcamGUI/FlatCAMGUI.py:742 flatcamGUI/FlatCAMGUI.py:1971
msgid "Grid Y snapping distance"
msgstr "Grid Y snapping distance"

#: flatcamGUI/FlatCAMGUI.py:748 flatcamGUI/FlatCAMGUI.py:1977
msgid ""
"When active, value on Grid_X\n"
"is copied to the Grid_Y value."
msgstr ""
"When active, value on Grid_X\n"
"is copied to the Grid_Y value."

#: flatcamGUI/FlatCAMGUI.py:754 flatcamGUI/FlatCAMGUI.py:1983
msgid "Snap to corner"
msgstr "Snap to corner"

#: flatcamGUI/FlatCAMGUI.py:758 flatcamGUI/FlatCAMGUI.py:1987
#: flatcamGUI/FlatCAMGUI.py:3344
msgid "Max. magnet distance"
msgstr "Max. magnet distance"

#: flatcamGUI/FlatCAMGUI.py:786 flatcamGUI/FlatCAMGUI.py:1586
msgid "Project"
msgstr "Project"

#: flatcamGUI/FlatCAMGUI.py:796
msgid "Selected"
msgstr "Selected"

#: flatcamGUI/FlatCAMGUI.py:815 flatcamGUI/FlatCAMGUI.py:823
msgid "Plot Area"
msgstr "Plot Area"

#: flatcamGUI/FlatCAMGUI.py:847
msgid "General"
msgstr "General"

#: flatcamGUI/FlatCAMGUI.py:856
msgid "APP.  DEFAULTS"
msgstr "APP.  DEFAULTS"

#: flatcamGUI/FlatCAMGUI.py:857
msgid "PROJ. OPTIONS "
msgstr "PROJ. OPTIONS "

#: flatcamGUI/FlatCAMGUI.py:868
msgid "GERBER"
msgstr "GERBER"

#: flatcamGUI/FlatCAMGUI.py:877
msgid "EXCELLON"
msgstr "EXCELLON"

#: flatcamGUI/FlatCAMGUI.py:886
msgid "GEOMETRY"
msgstr "GEOMETRY"

#: flatcamGUI/FlatCAMGUI.py:896
msgid "CNC-JOB"
msgstr "CNC-JOB"

#: flatcamGUI/FlatCAMGUI.py:905
msgid "TOOLS"
msgstr "TOOLS"

#: flatcamGUI/FlatCAMGUI.py:922
msgid "Import Preferences"
msgstr "Import Preferences"

#: flatcamGUI/FlatCAMGUI.py:925
msgid ""
"Import a full set of FlatCAM settings from a file\n"
"previously saved on HDD.\n"
"\n"
"FlatCAM automatically save a 'factory_defaults' file\n"
"on the first start. Do not delete that file."
msgstr ""
"Import a full set of FlatCAM settings from a file\n"
"previously saved on HDD.\n"
"\n"
"FlatCAM automatically save a 'factory_defaults' file\n"
"on the first start. Do not delete that file."

#: flatcamGUI/FlatCAMGUI.py:932
msgid "Export Preferences"
msgstr "Export Preferences"

#: flatcamGUI/FlatCAMGUI.py:935
msgid ""
"Export a full set of FlatCAM settings in a file\n"
"that is saved on HDD."
msgstr ""
"Export a full set of FlatCAM settings in a file\n"
"that is saved on HDD."

#: flatcamGUI/FlatCAMGUI.py:940
msgid "Open Pref Folder"
msgstr "Open Pref Folder"

#: flatcamGUI/FlatCAMGUI.py:943
msgid "Open the folder where FlatCAM save the preferences files."
msgstr "Open the folder where FlatCAM save the preferences files."

#: flatcamGUI/FlatCAMGUI.py:951
msgid "Save Preferences"
msgstr "Save Preferences"

#: flatcamGUI/FlatCAMGUI.py:954
msgid ""
"Save the current settings in the 'current_defaults' file\n"
"which is the file storing the working default preferences."
msgstr ""
"Save the current settings in the 'current_defaults' file\n"
"which is the file storing the working default preferences."

#: flatcamGUI/FlatCAMGUI.py:980
msgid ""
"<b>General Shortcut list</b><br>\n"
"            <table border=\"0\" cellpadding=\"0\" cellspacing=\"0\" style="
"\"width:283px\">\n"
"                <tbody>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\" width=\"89\"><strong>F3</strong></"
"td>\n"
"                        <td width=\"194\"><span style=\"color:"
"#006400\"><strong>&nbsp;SHOW SHORTCUT LIST</strong></span></td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\">&nbsp;</td>\n"
"                        <td>&nbsp;</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>1</strong></td>\n"
"                        <td>&nbsp;Switch to Project Tab</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>2</strong></td>\n"
"                        <td>&nbsp;Switch to Selected Tab</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>3</strong></td>\n"
"                        <td>&nbsp;Switch to Tool Tab</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\">&nbsp;</td>\n"
"                        <td>&nbsp;</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>B</strong></td>\n"
"                        <td>&nbsp;New Gerber</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>E</strong></td>\n"
"                        <td>&nbsp;Edit Object (if selected)</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>G</strong></td>\n"
"                        <td>&nbsp;Grid On/Off</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>J</strong></td>\n"
"                        <td>&nbsp;Jump to Coordinates</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>L</strong></td>\n"
"                        <td>&nbsp;New Excellon</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>M</strong></td>\n"
"                        <td>&nbsp;Move Obj</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>N</strong></td>\n"
"                        <td>&nbsp;New Geometry</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>O</strong></td>\n"
"                        <td>&nbsp;Set Origin</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>Q</strong></td>\n"
"                        <td>&nbsp;Change Units</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>P</strong></td>\n"
"                        <td>&nbsp;Open Properties Tool</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>R</strong></td>\n"
"                        <td>&nbsp;Rotate by 90 degree CW</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>S</strong></td>\n"
"                        <td>&nbsp;Shell Toggle</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>T</strong></td>\n"
"                        <td>&nbsp;Add a Tool (when in Geometry Selected Tab "
"or in Tools NCC or Tools Paint)</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>V</strong></td>\n"
"                        <td>&nbsp;Zoom Fit</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>X</strong></td>\n"
"                        <td>&nbsp;Flip on X_axis</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>Y</strong></td>\n"
"                        <td>&nbsp;Flip on Y_axis</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>&#39;-&#39;</strong></td>\n"
"                        <td>&nbsp;Zoom Out</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>&#39;=&#39;</strong></td>\n"
"                        <td>&nbsp;Zoom In</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\">&nbsp;</td>\n"
"                        <td>&nbsp;</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>CTRL+A</strong></td>\n"
"                        <td>&nbsp;Select All</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>CTRL+C</strong></td>\n"
"                        <td>&nbsp;Copy Obj</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>CTRL+E</strong></td>\n"
"                        <td>&nbsp;Open Excellon File</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>CTRL+G</strong></td>\n"
"                        <td>&nbsp;Open Gerber File</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>CTRL+N</strong></td>\n"
"                        <td>&nbsp;New Project</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>CTRL+M</strong></td>\n"
"                        <td>&nbsp;Measurement Tool</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>CTRL+O</strong></td>\n"
"                        <td>&nbsp;Open Project</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>CTRL+S</strong></td>\n"
"                        <td>&nbsp;Save Project As</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>CTRL+F10</strong></td>\n"
"                        <td>&nbsp;Toggle Plot Area</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\">&nbsp;</td>\n"
"                        <td>&nbsp;</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>SHIFT+C</strong></td>\n"
"                        <td>&nbsp;Copy Obj_Name</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>SHIFT+E</strong></td>\n"
"                        <td>&nbsp;Toggle Code Editor</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>SHIFT+G</strong></td>\n"
"                        <td>&nbsp;Toggle the axis</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>SHIFT+P</strong></td>\n"
"                        <td>&nbsp;Open Preferences Window</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>SHIFT+R</strong></td>\n"
"                        <td>&nbsp;Rotate by 90 degree CCW</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>SHIFT+S</strong></td>\n"
"                        <td>&nbsp;Run a Script</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>SHIFT+W</strong></td>\n"
"                        <td>&nbsp;Toggle the workspace</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>SHIFT+X</strong></td>\n"
"                        <td>&nbsp;Skew on X axis</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>SHIFT+Y</strong></td>\n"
"                        <td>&nbsp;Skew on Y axis</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\">&nbsp;</td>\n"
"                        <td>&nbsp;</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>ALT+C</strong></td>\n"
"                        <td>&nbsp;Calculators Tool</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>ALT+D</strong></td>\n"
"                        <td>&nbsp;2-Sided PCB Tool</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>ALT+K</strong></td>\n"
"                        <td>&nbsp;Solder Paste Dispensing Tool</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>ALT+L</strong></td>\n"
"                        <td>&nbsp;Film PCB Tool</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>ALT+N</strong></td>\n"
"                        <td>&nbsp;Non-Copper Clearing Tool</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>ALT+P</strong></td>\n"
"                        <td>&nbsp;Paint Area Tool</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>ALT+Q</strong></td>\n"
"                        <td>&nbsp;PDF Import Tool</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>ALT+R</strong></td>\n"
"                        <td>&nbsp;Transformations Tool</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>ALT+S</strong></td>\n"
"                        <td>&nbsp;View File Source</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>ALT+U</strong></td>\n"
"                        <td>&nbsp;Cutout PCB Tool</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>ALT+1</strong></td>\n"
"                        <td>&nbsp;Enable all Plots</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>ALT+2</strong></td>\n"
"                        <td>&nbsp;Disable all Plots</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>ALT+3</strong></td>\n"
"                        <td>&nbsp;Disable Non-selected Plots</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>ALT+F10</strong></td>\n"
"                        <td>&nbsp;Toggle Full Screen</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\">&nbsp;</td>\n"
"                        <td>&nbsp;</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>F1</strong></td>\n"
"                        <td>&nbsp;Open Online Manual</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>F4</strong></td>\n"
"                        <td>&nbsp;Open Online Tutorials</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>Del</strong></td>\n"
"                        <td>&nbsp;Delete Object</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>Del</strong></td>\n"
"                        <td>&nbsp;Alternate: Delete Tool</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>'`'</strong></td>\n"
"                        <td>&nbsp;(left to Key_1)Toogle Notebook Area (Left "
"Side)</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>SPACE</strong></td>\n"
"                        <td>&nbsp;En(Dis)able Obj Plot</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>Escape</strong></td>\n"
"                        <td>&nbsp;Deselects all objects</td>\n"
"                    </tr>\n"
"                </tbody>\n"
"            </table>\n"
"    \n"
"            "
msgstr ""
"<b>General Shortcut list</b><br>\n"
"            <table border=\"0\" cellpadding=\"0\" cellspacing=\"0\" style="
"\"width:283px\">\n"
"                <tbody>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\" width=\"89\"><strong>F3</strong></"
"td>\n"
"                        <td width=\"194\"><span style=\"color:"
"#006400\"><strong>&nbsp;SHOW SHORTCUT LIST</strong></span></td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\">&nbsp;</td>\n"
"                        <td>&nbsp;</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>1</strong></td>\n"
"                        <td>&nbsp;Switch to Project Tab</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>2</strong></td>\n"
"                        <td>&nbsp;Switch to Selected Tab</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>3</strong></td>\n"
"                        <td>&nbsp;Switch to Tool Tab</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\">&nbsp;</td>\n"
"                        <td>&nbsp;</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>B</strong></td>\n"
"                        <td>&nbsp;New Gerber</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>E</strong></td>\n"
"                        <td>&nbsp;Edit Object (if selected)</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>G</strong></td>\n"
"                        <td>&nbsp;Grid On/Off</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>J</strong></td>\n"
"                        <td>&nbsp;Jump to Coordinates</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>L</strong></td>\n"
"                        <td>&nbsp;New Excellon</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>M</strong></td>\n"
"                        <td>&nbsp;Move Obj</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>N</strong></td>\n"
"                        <td>&nbsp;New Geometry</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>O</strong></td>\n"
"                        <td>&nbsp;Set Origin</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>Q</strong></td>\n"
"                        <td>&nbsp;Change Units</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>P</strong></td>\n"
"                        <td>&nbsp;Open Properties Tool</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>R</strong></td>\n"
"                        <td>&nbsp;Rotate by 90 degree CW</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>S</strong></td>\n"
"                        <td>&nbsp;Shell Toggle</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>T</strong></td>\n"
"                        <td>&nbsp;Add a Tool (when in Geometry Selected Tab "
"or in Tools NCC or Tools Paint)</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>V</strong></td>\n"
"                        <td>&nbsp;Zoom Fit</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>X</strong></td>\n"
"                        <td>&nbsp;Flip on X_axis</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>Y</strong></td>\n"
"                        <td>&nbsp;Flip on Y_axis</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>&#39;-&#39;</strong></td>\n"
"                        <td>&nbsp;Zoom Out</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>&#39;=&#39;</strong></td>\n"
"                        <td>&nbsp;Zoom In</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\">&nbsp;</td>\n"
"                        <td>&nbsp;</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>CTRL+A</strong></td>\n"
"                        <td>&nbsp;Select All</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>CTRL+C</strong></td>\n"
"                        <td>&nbsp;Copy Obj</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>CTRL+E</strong></td>\n"
"                        <td>&nbsp;Open Excellon File</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>CTRL+G</strong></td>\n"
"                        <td>&nbsp;Open Gerber File</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>CTRL+N</strong></td>\n"
"                        <td>&nbsp;New Project</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>CTRL+M</strong></td>\n"
"                        <td>&nbsp;Measurement Tool</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>CTRL+O</strong></td>\n"
"                        <td>&nbsp;Open Project</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>CTRL+S</strong></td>\n"
"                        <td>&nbsp;Save Project As</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>CTRL+F10</strong></td>\n"
"                        <td>&nbsp;Toggle Plot Area</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\">&nbsp;</td>\n"
"                        <td>&nbsp;</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>SHIFT+C</strong></td>\n"
"                        <td>&nbsp;Copy Obj_Name</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>SHIFT+E</strong></td>\n"
"                        <td>&nbsp;Toggle Code Editor</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>SHIFT+G</strong></td>\n"
"                        <td>&nbsp;Toggle the axis</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>SHIFT+P</strong></td>\n"
"                        <td>&nbsp;Open Preferences Window</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>SHIFT+R</strong></td>\n"
"                        <td>&nbsp;Rotate by 90 degree CCW</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>SHIFT+S</strong></td>\n"
"                        <td>&nbsp;Run a Script</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>SHIFT+W</strong></td>\n"
"                        <td>&nbsp;Toggle the workspace</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>SHIFT+X</strong></td>\n"
"                        <td>&nbsp;Skew on X axis</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>SHIFT+Y</strong></td>\n"
"                        <td>&nbsp;Skew on Y axis</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\">&nbsp;</td>\n"
"                        <td>&nbsp;</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>ALT+C</strong></td>\n"
"                        <td>&nbsp;Calculators Tool</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>ALT+D</strong></td>\n"
"                        <td>&nbsp;2-Sided PCB Tool</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>ALT+K</strong></td>\n"
"                        <td>&nbsp;Solder Paste Dispensing Tool</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>ALT+L</strong></td>\n"
"                        <td>&nbsp;Film PCB Tool</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>ALT+N</strong></td>\n"
"                        <td>&nbsp;Non-Copper Clearing Tool</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>ALT+P</strong></td>\n"
"                        <td>&nbsp;Paint Area Tool</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>ALT+Q</strong></td>\n"
"                        <td>&nbsp;PDF Import Tool</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>ALT+R</strong></td>\n"
"                        <td>&nbsp;Transformations Tool</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>ALT+S</strong></td>\n"
"                        <td>&nbsp;View File Source</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>ALT+U</strong></td>\n"
"                        <td>&nbsp;Cutout PCB Tool</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>ALT+1</strong></td>\n"
"                        <td>&nbsp;Enable all Plots</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>ALT+2</strong></td>\n"
"                        <td>&nbsp;Disable all Plots</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>ALT+3</strong></td>\n"
"                        <td>&nbsp;Disable Non-selected Plots</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>ALT+F10</strong></td>\n"
"                        <td>&nbsp;Toggle Full Screen</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\">&nbsp;</td>\n"
"                        <td>&nbsp;</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>F1</strong></td>\n"
"                        <td>&nbsp;Open Online Manual</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>F4</strong></td>\n"
"                        <td>&nbsp;Open Online Tutorials</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>Del</strong></td>\n"
"                        <td>&nbsp;Delete Object</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>Del</strong></td>\n"
"                        <td>&nbsp;Alternate: Delete Tool</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>'`'</strong></td>\n"
"                        <td>&nbsp;(left to Key_1)Toogle Notebook Area (Left "
"Side)</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>SPACE</strong></td>\n"
"                        <td>&nbsp;En(Dis)able Obj Plot</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>Escape</strong></td>\n"
"                        <td>&nbsp;Deselects all objects</td>\n"
"                    </tr>\n"
"                </tbody>\n"
"            </table>\n"
"    \n"
"            "

#: flatcamGUI/FlatCAMGUI.py:1265
msgid ""
"<b>Editor Shortcut list</b><br>\n"
"            <br>\n"
"            <strong><span style=\"color:#0000ff\">GEOMETRY EDITOR</span></"
"strong><br>\n"
"    \n"
"            <table border=\"0\" cellpadding=\"0\" cellspacing=\"0\" style="
"\"width:283px\">\n"
"                <tbody>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\" width=\"89\"><strong>A</strong></"
"td>\n"
"                        <td width=\"194\">&nbsp;Draw an Arc</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>B</strong></td>\n"
"                        <td>&nbsp;Buffer Tool</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>C</strong></td>\n"
"                        <td>&nbsp;Copy Geo Item</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>D</strong></td>\n"
"                        <td>&nbsp;Within Add Arc will toogle the ARC "
"direction: CW or CCW</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>E</strong></td>\n"
"                        <td>&nbsp;Polygon Intersection Tool</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>I</strong></td>\n"
"                        <td>&nbsp;Paint Tool</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>J</strong></td>\n"
"                        <td>&nbsp;Jump to Location (x, y)</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>K</strong></td>\n"
"                        <td>&nbsp;Toggle Corner Snap</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>M</strong></td>\n"
"                        <td>&nbsp;Move Geo Item</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>M</strong></td>\n"
"                        <td>&nbsp;Within Add Arc will cycle through the ARC "
"modes</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>N</strong></td>\n"
"                        <td>&nbsp;Draw a Polygon</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>O</strong></td>\n"
"                        <td>&nbsp;Draw a Circle</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>P</strong></td>\n"
"                        <td>&nbsp;Draw a Path</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>R</strong></td>\n"
"                        <td>&nbsp;Draw Rectangle</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>S</strong></td>\n"
"                        <td>&nbsp;Polygon Substraction Tool</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>T</strong></td>\n"
"                        <td>&nbsp;Add Text Tool</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>U</strong></td>\n"
"                        <td>&nbsp;Polygon Union Tool</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>X</strong></td>\n"
"                        <td>&nbsp;Flip shape on X axis</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>Y</strong></td>\n"
"                        <td>&nbsp;Flip shape on Y axis</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\">&nbsp;</td>\n"
"                        <td>&nbsp;</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>SHIFT+X</strong></td>\n"
"                        <td>&nbsp;Skew shape on X axis</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>SHIFT+Y</strong></td>\n"
"                        <td>&nbsp;Skew shape on Y axis</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\">&nbsp;</td>\n"
"                        <td>&nbsp;</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>ALT+R</strong></td>\n"
"                        <td>&nbsp;Editor Transformation Tool</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>ALT+X</strong></td>\n"
"                        <td>&nbsp;Offset shape on X axis</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>ALT+Y</strong></td>\n"
"                        <td>&nbsp;Offset shape on Y axis</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\">&nbsp;</td>\n"
"                        <td>&nbsp;</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>CTRL+M</strong></td>\n"
"                        <td>&nbsp;Measurement Tool</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>CTRL+S</strong></td>\n"
"                        <td>&nbsp;Save Object and Exit Editor</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>CTRL+X</strong></td>\n"
"                        <td>&nbsp;Polygon Cut Tool</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\">&nbsp;</td>\n"
"                        <td>&nbsp;</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>Space</strong></td>\n"
"                        <td>&nbsp;Rotate Geometry</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>ENTER</strong></td>\n"
"                        <td>&nbsp;Finish drawing for certain tools</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>ESC</strong></td>\n"
"                        <td>&nbsp;Abort and return to Select</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>Del</strong></td>\n"
"                        <td>&nbsp;Delete Shape</td>\n"
"                    </tr>\n"
"                </tbody>\n"
"            </table>\n"
"            <br>\n"
"            <br>\n"
"            <strong><span style=\"color:#ff0000\">EXCELLON EDITOR</span></"
"strong><br>\n"
"            <table border=\"0\" cellpadding=\"0\" cellspacing=\"0\" style="
"\"width:283px\">\n"
"                <tbody>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\" width=\"89\"><strong>A</strong></"
"td>\n"
"                        <td width=\"194\">&nbsp;Add Drill Array</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>C</strong></td>\n"
"                        <td>&nbsp;Copy Drill(s)</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>D</strong></td>\n"
"                        <td>&nbsp;Add Drill</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>J</strong></td>\n"
"                        <td>&nbsp;Jump to Location (x, y)</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>M</strong></td>\n"
"                        <td>&nbsp;Move Drill(s)</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>R</strong></td>\n"
"                        <td>&nbsp;Resize Drill(s)</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>T</strong></td>\n"
"                        <td>&nbsp;Add a new Tool</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\">&nbsp;</td>\n"
"                        <td>&nbsp;</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>Del</strong></td>\n"
"                        <td>&nbsp;Delete Drill(s)</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>Del</strong></td>\n"
"                        <td>&nbsp;Alternate: Delete Tool(s)</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\">&nbsp;</td>\n"
"                        <td>&nbsp;</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>ESC</strong></td>\n"
"                        <td>&nbsp;Abort and return to Select</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>CTRL+S</strong></td>\n"
"                        <td>&nbsp;Save Object and Exit Editor</td>\n"
"                    </tr>\n"
"                </tbody>\n"
"            </table>\n"
"            <br>\n"
"            <br>\n"
"            <strong><span style=\"color:#00ff00\">GERBER EDITOR</span></"
"strong><br>\n"
"            <table border=\"0\" cellpadding=\"0\" cellspacing=\"0\" style="
"\"width:283px\">\n"
"                <tbody>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\" width=\"89\"><strong>A</strong></"
"td>\n"
"                        <td width=\"194\">&nbsp;Add Pad Array</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>B</strong></td>\n"
"                        <td>&nbsp;Buffer</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>C</strong></td>\n"
"                        <td>&nbsp;Copy</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>D</strong></td>\n"
"                        <td>&nbsp;Add Disc</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>E</strong></td>\n"
"                        <td>&nbsp;Add SemiDisc</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>J</strong></td>\n"
"                        <td>&nbsp;Jump to Location (x, y)</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>M</strong></td>\n"
"                        <td>&nbsp;Move</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>N</strong></td>\n"
"                        <td>&nbsp;Add Region</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>P</strong></td>\n"
"                        <td>&nbsp;Add Pad</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>R</strong></td>\n"
"                        <td>&nbsp;Within Track & Region Tools will cycle in "
"REVERSE the bend modes</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>S</strong></td>\n"
"                        <td>&nbsp;Scale</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>T</strong></td>\n"
"                        <td>&nbsp;Add Track</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>T</strong></td>\n"
"                        <td>&nbsp;Within Track & Region Tools will cycle "
"FORWARD the bend modes</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\">&nbsp;</td>\n"
"                        <td>&nbsp;</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>Del</strong></td>\n"
"                        <td>&nbsp;Delete</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>Del</strong></td>\n"
"                        <td>&nbsp;Alternate: Delete Apertures</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\">&nbsp;</td>\n"
"                        <td>&nbsp;</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>ESC</strong></td>\n"
"                        <td>&nbsp;Abort and return to Select</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>CTRL+S</strong></td>\n"
"                        <td>&nbsp;Save Object and Exit Editor</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\">&nbsp;</td>\n"
"                        <td>&nbsp;</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>ALT+R</strong></td>\n"
"                        <td>&nbsp;Transformation Tool</td>\n"
"                    </tr>\n"
"                </tbody>\n"
"            </table>\n"
"                    "
msgstr ""
"<b>Editor Shortcut list</b><br>\n"
"            <br>\n"
"            <strong><span style=\"color:#0000ff\">GEOMETRY EDITOR</span></"
"strong><br>\n"
"    \n"
"            <table border=\"0\" cellpadding=\"0\" cellspacing=\"0\" style="
"\"width:283px\">\n"
"                <tbody>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\" width=\"89\"><strong>A</strong></"
"td>\n"
"                        <td width=\"194\">&nbsp;Draw an Arc</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>B</strong></td>\n"
"                        <td>&nbsp;Buffer Tool</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>C</strong></td>\n"
"                        <td>&nbsp;Copy Geo Item</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>D</strong></td>\n"
"                        <td>&nbsp;Within Add Arc will toogle the ARC "
"direction: CW or CCW</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>E</strong></td>\n"
"                        <td>&nbsp;Polygon Intersection Tool</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>I</strong></td>\n"
"                        <td>&nbsp;Paint Tool</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>J</strong></td>\n"
"                        <td>&nbsp;Jump to Location (x, y)</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>K</strong></td>\n"
"                        <td>&nbsp;Toggle Corner Snap</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>M</strong></td>\n"
"                        <td>&nbsp;Move Geo Item</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>M</strong></td>\n"
"                        <td>&nbsp;Within Add Arc will cycle through the ARC "
"modes</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>N</strong></td>\n"
"                        <td>&nbsp;Draw a Polygon</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>O</strong></td>\n"
"                        <td>&nbsp;Draw a Circle</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>P</strong></td>\n"
"                        <td>&nbsp;Draw a Path</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>R</strong></td>\n"
"                        <td>&nbsp;Draw Rectangle</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>S</strong></td>\n"
"                        <td>&nbsp;Polygon Substraction Tool</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>T</strong></td>\n"
"                        <td>&nbsp;Add Text Tool</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>U</strong></td>\n"
"                        <td>&nbsp;Polygon Union Tool</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>X</strong></td>\n"
"                        <td>&nbsp;Flip shape on X axis</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>Y</strong></td>\n"
"                        <td>&nbsp;Flip shape on Y axis</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\">&nbsp;</td>\n"
"                        <td>&nbsp;</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>SHIFT+X</strong></td>\n"
"                        <td>&nbsp;Skew shape on X axis</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>SHIFT+Y</strong></td>\n"
"                        <td>&nbsp;Skew shape on Y axis</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\">&nbsp;</td>\n"
"                        <td>&nbsp;</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>ALT+R</strong></td>\n"
"                        <td>&nbsp;Editor Transformation Tool</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>ALT+X</strong></td>\n"
"                        <td>&nbsp;Offset shape on X axis</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>ALT+Y</strong></td>\n"
"                        <td>&nbsp;Offset shape on Y axis</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\">&nbsp;</td>\n"
"                        <td>&nbsp;</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>CTRL+M</strong></td>\n"
"                        <td>&nbsp;Measurement Tool</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>CTRL+S</strong></td>\n"
"                        <td>&nbsp;Save Object and Exit Editor</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>CTRL+X</strong></td>\n"
"                        <td>&nbsp;Polygon Cut Tool</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\">&nbsp;</td>\n"
"                        <td>&nbsp;</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>Space</strong></td>\n"
"                        <td>&nbsp;Rotate Geometry</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>ENTER</strong></td>\n"
"                        <td>&nbsp;Finish drawing for certain tools</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>ESC</strong></td>\n"
"                        <td>&nbsp;Abort and return to Select</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>Del</strong></td>\n"
"                        <td>&nbsp;Delete Shape</td>\n"
"                    </tr>\n"
"                </tbody>\n"
"            </table>\n"
"            <br>\n"
"            <br>\n"
"            <strong><span style=\"color:#ff0000\">EXCELLON EDITOR</span></"
"strong><br>\n"
"            <table border=\"0\" cellpadding=\"0\" cellspacing=\"0\" style="
"\"width:283px\">\n"
"                <tbody>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\" width=\"89\"><strong>A</strong></"
"td>\n"
"                        <td width=\"194\">&nbsp;Add Drill Array</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>C</strong></td>\n"
"                        <td>&nbsp;Copy Drill(s)</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>D</strong></td>\n"
"                        <td>&nbsp;Add Drill</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>J</strong></td>\n"
"                        <td>&nbsp;Jump to Location (x, y)</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>M</strong></td>\n"
"                        <td>&nbsp;Move Drill(s)</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>R</strong></td>\n"
"                        <td>&nbsp;Resize Drill(s)</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>T</strong></td>\n"
"                        <td>&nbsp;Add a new Tool</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\">&nbsp;</td>\n"
"                        <td>&nbsp;</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>Del</strong></td>\n"
"                        <td>&nbsp;Delete Drill(s)</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>Del</strong></td>\n"
"                        <td>&nbsp;Alternate: Delete Tool(s)</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\">&nbsp;</td>\n"
"                        <td>&nbsp;</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>ESC</strong></td>\n"
"                        <td>&nbsp;Abort and return to Select</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>CTRL+S</strong></td>\n"
"                        <td>&nbsp;Save Object and Exit Editor</td>\n"
"                    </tr>\n"
"                </tbody>\n"
"            </table>\n"
"            <br>\n"
"            <br>\n"
"            <strong><span style=\"color:#00ff00\">GERBER EDITOR</span></"
"strong><br>\n"
"            <table border=\"0\" cellpadding=\"0\" cellspacing=\"0\" style="
"\"width:283px\">\n"
"                <tbody>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\" width=\"89\"><strong>A</strong></"
"td>\n"
"                        <td width=\"194\">&nbsp;Add Pad Array</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>B</strong></td>\n"
"                        <td>&nbsp;Buffer</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>C</strong></td>\n"
"                        <td>&nbsp;Copy</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>D</strong></td>\n"
"                        <td>&nbsp;Add Disc</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>E</strong></td>\n"
"                        <td>&nbsp;Add SemiDisc</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>J</strong></td>\n"
"                        <td>&nbsp;Jump to Location (x, y)</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>M</strong></td>\n"
"                        <td>&nbsp;Move</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>N</strong></td>\n"
"                        <td>&nbsp;Add Region</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>P</strong></td>\n"
"                        <td>&nbsp;Add Pad</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>R</strong></td>\n"
"                        <td>&nbsp;Within Track & Region Tools will cycle in "
"REVERSE the bend modes</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>S</strong></td>\n"
"                        <td>&nbsp;Scale</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>T</strong></td>\n"
"                        <td>&nbsp;Add Track</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>T</strong></td>\n"
"                        <td>&nbsp;Within Track & Region Tools will cycle "
"FORWARD the bend modes</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\">&nbsp;</td>\n"
"                        <td>&nbsp;</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>Del</strong></td>\n"
"                        <td>&nbsp;Delete</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>Del</strong></td>\n"
"                        <td>&nbsp;Alternate: Delete Apertures</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\">&nbsp;</td>\n"
"                        <td>&nbsp;</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>ESC</strong></td>\n"
"                        <td>&nbsp;Abort and return to Select</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>CTRL+S</strong></td>\n"
"                        <td>&nbsp;Save Object and Exit Editor</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\">&nbsp;</td>\n"
"                        <td>&nbsp;</td>\n"
"                    </tr>\n"
"                    <tr height=\"20\">\n"
"                        <td height=\"20\"><strong>ALT+R</strong></td>\n"
"                        <td>&nbsp;Transformation Tool</td>\n"
"                    </tr>\n"
"                </tbody>\n"
"            </table>\n"
"                    "

#: flatcamGUI/FlatCAMGUI.py:1578
msgid "Toggle Panel"
msgstr "Toggle Panel"

#: flatcamGUI/FlatCAMGUI.py:1581
msgid "New"
msgstr "New"

#: flatcamGUI/FlatCAMGUI.py:1582
msgid "Geometry"
msgstr "Geometry"

#: flatcamGUI/FlatCAMGUI.py:1584
msgid "Excellon"
msgstr "Excellon"

#: flatcamGUI/FlatCAMGUI.py:1589
msgid "Grids"
msgstr "Grids"

#: flatcamGUI/FlatCAMGUI.py:1591
msgid "View"
msgstr "View"

#: flatcamGUI/FlatCAMGUI.py:1593
msgid "Clear Plot"
msgstr "Clear Plot"

#: flatcamGUI/FlatCAMGUI.py:1594
msgid "Replot"
msgstr "Replot"

#: flatcamGUI/FlatCAMGUI.py:1597
msgid "Geo Editor"
msgstr "Geo Editor"

#: flatcamGUI/FlatCAMGUI.py:1598
msgid "Line"
msgstr "Line"

#: flatcamGUI/FlatCAMGUI.py:1599
msgid "Rectangle"
msgstr "Rectangle"

#: flatcamGUI/FlatCAMGUI.py:1600
msgid "Cut"
msgstr "Cut"

#: flatcamGUI/FlatCAMGUI.py:1605
msgid "Pad"
msgstr "Pad"

#: flatcamGUI/FlatCAMGUI.py:1606
msgid "Pad Array"
msgstr "Pad Array"

#: flatcamGUI/FlatCAMGUI.py:1607
msgid "Track"
msgstr "Track"

#: flatcamGUI/FlatCAMGUI.py:1608
msgid "Region"
msgstr "Region"

#: flatcamGUI/FlatCAMGUI.py:1610
msgid "Exc Editor"
msgstr "Exc Editor"

#: flatcamGUI/FlatCAMGUI.py:1611
msgid "Add Drill"
msgstr "Add Drill"

#: flatcamGUI/FlatCAMGUI.py:1643
msgid "Print Preview"
msgstr "Print Preview"

#: flatcamGUI/FlatCAMGUI.py:1644
msgid "Print Code"
msgstr "Print Code"

#: flatcamGUI/FlatCAMGUI.py:1645
msgid "Find in Code"
msgstr "Find in Code"

#: flatcamGUI/FlatCAMGUI.py:1650
msgid "Replace With"
msgstr "Replace With"

#: flatcamGUI/FlatCAMGUI.py:1654
msgid "All"
msgstr "All"

#: flatcamGUI/FlatCAMGUI.py:1656
msgid ""
"When checked it will replace all instances in the 'Find' box\n"
"with the text in the 'Replace' box.."
msgstr ""
"When checked it will replace all instances in the 'Find' box\n"
"with the text in the 'Replace' box.."

#: flatcamGUI/FlatCAMGUI.py:1659
msgid "Open Code"
msgstr "Open Code"

#: flatcamGUI/FlatCAMGUI.py:1660
msgid "Save Code"
msgstr "Save Code"

#: flatcamGUI/FlatCAMGUI.py:1695
msgid ""
"Relative neasurement.\n"
"Reference is last click position"
msgstr ""
"Relative neasurement.\n"
"Reference is last click position"

#: flatcamGUI/FlatCAMGUI.py:1701
msgid ""
"Absolute neasurement.\n"
"Reference is (X=0, Y= 0) position"
msgstr ""
"Absolute neasurement.\n"
"Reference is (X=0, Y= 0) position"

#: flatcamGUI/FlatCAMGUI.py:1897
msgid "Select 'Esc'"
msgstr "Select 'Esc'"

#: flatcamGUI/FlatCAMGUI.py:1924
msgid "Copy Objects"
msgstr "Copy Objects"

#: flatcamGUI/FlatCAMGUI.py:1926
msgid "Delete Shape"
msgstr "Delete Shape"

#: flatcamGUI/FlatCAMGUI.py:1931
msgid "Move Objects"
msgstr "Move Objects"

#: flatcamGUI/FlatCAMGUI.py:2360
msgid ""
"Please first select a geometry item to be cutted\n"
"then select the geometry item that will be cutted\n"
"out of the first item. In the end press ~X~ key or\n"
"the toolbar button."
msgstr ""
"Please first select a geometry item to be cutted\n"
"then select the geometry item that will be cutted\n"
"out of the first item. In the end press ~X~ key or\n"
"the toolbar button."

#: flatcamGUI/FlatCAMGUI.py:2367 flatcamGUI/FlatCAMGUI.py:2504
#: flatcamGUI/FlatCAMGUI.py:2563 flatcamGUI/FlatCAMGUI.py:2583
msgid "Warning"
msgstr "Warning"

#: flatcamGUI/FlatCAMGUI.py:2434 flatcamGUI/FlatCAMGUI.py:2633
#: flatcamGUI/FlatCAMGUI.py:2844
msgid "[WARNING_NOTCL] Cancelled."
msgstr "[WARNING_NOTCL] Cancelled."

#: flatcamGUI/FlatCAMGUI.py:2499
msgid ""
"Please select geometry items \n"
"on which to perform Intersection Tool."
msgstr ""
"Please select geometry items \n"
"on which to perform Intersection Tool."

#: flatcamGUI/FlatCAMGUI.py:2558
msgid ""
"Please select geometry items \n"
"on which to perform Substraction Tool."
msgstr ""
"Please select geometry items \n"
"on which to perform Substraction Tool."

#: flatcamGUI/FlatCAMGUI.py:2578
msgid ""
"Please select geometry items \n"
"on which to perform union."
msgstr ""
"Please select geometry items \n"
"on which to perform union."

#: flatcamGUI/FlatCAMGUI.py:2649 flatcamGUI/FlatCAMGUI.py:2861
msgid "[WARNING_NOTCL] Cancelled. Nothing selected to delete."
msgstr "[WARNING_NOTCL] Cancelled. Nothing selected to delete."

#: flatcamGUI/FlatCAMGUI.py:2733 flatcamGUI/FlatCAMGUI.py:2928
msgid "[WARNING_NOTCL] Cancelled. Nothing selected to copy."
msgstr "[WARNING_NOTCL] Cancelled. Nothing selected to copy."

#: flatcamGUI/FlatCAMGUI.py:2779 flatcamGUI/FlatCAMGUI.py:2974
msgid "[WARNING_NOTCL] Cancelled. Nothing selected to move."
msgstr "[WARNING_NOTCL] Cancelled. Nothing selected to move."

#: flatcamGUI/FlatCAMGUI.py:2988
msgid "New Tool ..."
msgstr "New Tool ..."

#: flatcamGUI/FlatCAMGUI.py:2989
msgid "Enter a Tool Diameter:"
msgstr "Enter a Tool Diameter:"

#: flatcamGUI/FlatCAMGUI.py:3032
msgid "Measurement Tool exit..."
msgstr "Measurement Tool exit..."

#: flatcamGUI/FlatCAMGUI.py:3323
msgid "GUI Preferences"
msgstr "GUI Preferences"

#: flatcamGUI/FlatCAMGUI.py:3329
msgid "Grid X value:"
msgstr "Grid X value:"

#: flatcamGUI/FlatCAMGUI.py:3331
msgid "This is the Grid snap value on X axis."
msgstr "This is the Grid snap value on X axis."

#: flatcamGUI/FlatCAMGUI.py:3336
msgid "Grid Y value:"
msgstr "Grid Y value:"

#: flatcamGUI/FlatCAMGUI.py:3338
msgid "This is the Grid snap value on Y axis."
msgstr "This is the Grid snap value on Y axis."

#: flatcamGUI/FlatCAMGUI.py:3343
msgid "Snap Max:"
msgstr "Snap Max:"

#: flatcamGUI/FlatCAMGUI.py:3348
msgid "Workspace:"
msgstr "Workspace:"

#: flatcamGUI/FlatCAMGUI.py:3350
msgid ""
"Draw a delimiting rectangle on canvas.\n"
"The purpose is to illustrate the limits for our work."
msgstr ""
"Draw a delimiting rectangle on canvas.\n"
"The purpose is to illustrate the limits for our work."

#: flatcamGUI/FlatCAMGUI.py:3353
msgid "Wk. format:"
msgstr "Wk. format:"

#: flatcamGUI/FlatCAMGUI.py:3355
msgid ""
"Select the type of rectangle to be used on canvas,\n"
"as valid workspace."
msgstr ""
"Select the type of rectangle to be used on canvas,\n"
"as valid workspace."

#: flatcamGUI/FlatCAMGUI.py:3368
msgid "Plot Fill:"
msgstr "Plot Fill:"

#: flatcamGUI/FlatCAMGUI.py:3370
msgid ""
"Set the fill color for plotted objects.\n"
"First 6 digits are the color and the last 2\n"
"digits are for alpha (transparency) level."
msgstr ""
"Set the fill color for plotted objects.\n"
"First 6 digits are the color and the last 2\n"
"digits are for alpha (transparency) level."

#: flatcamGUI/FlatCAMGUI.py:3384 flatcamGUI/FlatCAMGUI.py:3434
#: flatcamGUI/FlatCAMGUI.py:3484
msgid "Alpha Level:"
msgstr "Alpha Level:"

#: flatcamGUI/FlatCAMGUI.py:3386
msgid "Set the fill transparency for plotted objects."
msgstr "Set the fill transparency for plotted objects."

#: flatcamGUI/FlatCAMGUI.py:3403
msgid "Plot Line:"
msgstr "Plot Line:"

#: flatcamGUI/FlatCAMGUI.py:3405
msgid "Set the line color for plotted objects."
msgstr "Set the line color for plotted objects."

#: flatcamGUI/FlatCAMGUI.py:3417
msgid "Sel. Fill:"
msgstr "Sel. Fill:"

#: flatcamGUI/FlatCAMGUI.py:3419
msgid ""
"Set the fill color for the selection box\n"
"in case that the selection is done from left to right.\n"
"First 6 digits are the color and the last 2\n"
"digits are for alpha (transparency) level."
msgstr ""
"Set the fill color for the selection box\n"
"in case that the selection is done from left to right.\n"
"First 6 digits are the color and the last 2\n"
"digits are for alpha (transparency) level."

#: flatcamGUI/FlatCAMGUI.py:3436
msgid "Set the fill transparency for the 'left to right' selection box."
msgstr "Set the fill transparency for the 'left to right' selection box."

#: flatcamGUI/FlatCAMGUI.py:3453
msgid "Sel. Line:"
msgstr "Sel. Line:"

#: flatcamGUI/FlatCAMGUI.py:3455
msgid "Set the line color for the 'left to right' selection box."
msgstr "Set the line color for the 'left to right' selection box."

#: flatcamGUI/FlatCAMGUI.py:3467
msgid "Sel2. Fill:"
msgstr "Sel2. Fill:"

#: flatcamGUI/FlatCAMGUI.py:3469
msgid ""
"Set the fill color for the selection box\n"
"in case that the selection is done from right to left.\n"
"First 6 digits are the color and the last 2\n"
"digits are for alpha (transparency) level."
msgstr ""
"Set the fill color for the selection box\n"
"in case that the selection is done from right to left.\n"
"First 6 digits are the color and the last 2\n"
"digits are for alpha (transparency) level."

#: flatcamGUI/FlatCAMGUI.py:3486
msgid "Set the fill transparency for selection 'right to left' box."
msgstr "Set the fill transparency for selection 'right to left' box."

#: flatcamGUI/FlatCAMGUI.py:3503
msgid "Sel2. Line:"
msgstr "Sel2. Line:"

#: flatcamGUI/FlatCAMGUI.py:3505
msgid "Set the line color for the 'right to left' selection box."
msgstr "Set the line color for the 'right to left' selection box."

#: flatcamGUI/FlatCAMGUI.py:3517
msgid "Editor Draw:"
msgstr "Editor Draw:"

#: flatcamGUI/FlatCAMGUI.py:3519
msgid "Set the color for the shape."
msgstr "Set the color for the shape."

#: flatcamGUI/FlatCAMGUI.py:3531
msgid "Editor Draw Sel.:"
msgstr "Editor Draw Sel.:"

#: flatcamGUI/FlatCAMGUI.py:3533
msgid "Set the color of the shape when selected."
msgstr "Set the color of the shape when selected."

#: flatcamGUI/FlatCAMGUI.py:3545
msgid "Project Items:"
msgstr "Project Items:"

#: flatcamGUI/FlatCAMGUI.py:3547
msgid "Set the color of the items in Project Tab Tree."
msgstr "Set the color of the items in Project Tab Tree."

#: flatcamGUI/FlatCAMGUI.py:3558
msgid "Proj. Dis. Items:"
msgstr "Proj. Dis. Items:"

#: flatcamGUI/FlatCAMGUI.py:3560
msgid ""
"Set the color of the items in Project Tab Tree,\n"
"for the case when the items are disabled."
msgstr ""
"Set the color of the items in Project Tab Tree,\n"
"for the case when the items are disabled."

#: flatcamGUI/FlatCAMGUI.py:3611
msgid "GUI Settings"
msgstr "GUI Settings"

#: flatcamGUI/FlatCAMGUI.py:3617
msgid "Layout:"
msgstr "Layout:"

#: flatcamGUI/FlatCAMGUI.py:3619
msgid ""
"Select an layout for FlatCAM.\n"
"It is applied immediately."
msgstr ""
"Select an layout for FlatCAM.\n"
"It is applied immediately."

#: flatcamGUI/FlatCAMGUI.py:3635
msgid "Style:"
msgstr "Style:"

#: flatcamGUI/FlatCAMGUI.py:3637
msgid ""
"Select an style for FlatCAM.\n"
"It will be applied at the next app start."
msgstr ""
"Select an style for FlatCAM.\n"
"It will be applied at the next app start."

#: flatcamGUI/FlatCAMGUI.py:3648
msgid "HDPI Support:"
msgstr "HDPI Support:"

#: flatcamGUI/FlatCAMGUI.py:3650
msgid ""
"Enable High DPI support for FlatCAM.\n"
"It will be applied at the next app start."
msgstr ""
"Enable High DPI support for FlatCAM.\n"
"It will be applied at the next app start."

#: flatcamGUI/FlatCAMGUI.py:3663
msgid "Clear GUI Settings:"
msgstr "Clear GUI Settings:"

#: flatcamGUI/FlatCAMGUI.py:3665
msgid ""
"Clear the GUI settings for FlatCAM,\n"
"such as: layout, gui state, style, hdpi support etc."
msgstr ""
"Clear the GUI settings for FlatCAM,\n"
"such as: layout, gui state, style, hdpi support etc."

#: flatcamGUI/FlatCAMGUI.py:3668
msgid "Clear"
msgstr "Clear"

#: flatcamGUI/FlatCAMGUI.py:3672
msgid "Hover Shape:"
msgstr "Hover Shape:"

#: flatcamGUI/FlatCAMGUI.py:3674
msgid ""
"Enable display of a hover shape for FlatCAM objects.\n"
"It is displayed whenever the mouse cursor is hovering\n"
"over any kind of not-selected object."
msgstr ""
"Enable display of a hover shape for FlatCAM objects.\n"
"It is displayed whenever the mouse cursor is hovering\n"
"over any kind of not-selected object."

#: flatcamGUI/FlatCAMGUI.py:3681
msgid "Sel. Shape:"
msgstr "Sel. Shape:"

#: flatcamGUI/FlatCAMGUI.py:3683
msgid ""
"Enable the display of a selection shape for FlatCAM objects.\n"
"It is displayed whenever the mouse selects an object\n"
"either by clicking or dragging mouse from left to right or\n"
"right to left."
msgstr ""
"Enable the display of a selection shape for FlatCAM objects.\n"
"It is displayed whenever the mouse selects an object\n"
"either by clicking or dragging mouse from left to right or\n"
"right to left."

#: flatcamGUI/FlatCAMGUI.py:3725
msgid "Are you sure you want to delete the GUI Settings? \n"
msgstr "Are you sure you want to delete the GUI Settings? \n"

#: flatcamGUI/FlatCAMGUI.py:3728
msgid "Clear GUI Settings"
msgstr "Clear GUI Settings"

#: flatcamGUI/FlatCAMGUI.py:3749
msgid "App Preferences"
msgstr "App Preferences"

#: flatcamGUI/FlatCAMGUI.py:3755
msgid "<b>Units:</b>"
msgstr "<b>Units:</b>"

#: flatcamGUI/FlatCAMGUI.py:3756
msgid ""
"The default value for FlatCAM units.\n"
"Whatever is selected here is set every time\n"
"FLatCAM is started."
msgstr ""
"The default value for FlatCAM units.\n"
"Whatever is selected here is set every time\n"
"FLatCAM is started."

#: flatcamGUI/FlatCAMGUI.py:3763
msgid "<b>APP. LEVEL:</b>"
msgstr "<b>APP. LEVEL:</b>"

#: flatcamGUI/FlatCAMGUI.py:3764
msgid ""
"Choose the default level of usage for FlatCAM.\n"
"BASIC level -> reduced functionality, best for beginner's.\n"
"ADVANCED level -> full functionality.\n"
"\n"
"The choice here will influence the parameters in\n"
"the Selected Tab for all kinds of FlatCAM objects."
msgstr ""
"Choose the default level of usage for FlatCAM.\n"
"BASIC level -> reduced functionality, best for beginner's.\n"
"ADVANCED level -> full functionality.\n"
"\n"
"The choice here will influence the parameters in\n"
"the Selected Tab for all kinds of FlatCAM objects."

#: flatcamGUI/FlatCAMGUI.py:3769
msgid "Basic"
msgstr "Basic"

#: flatcamGUI/FlatCAMGUI.py:3770
msgid "Advanced"
msgstr "Advanced"

#: flatcamGUI/FlatCAMGUI.py:3773
msgid "<b>Languages:</b>"
msgstr "<b>Languages:</b>"

#: flatcamGUI/FlatCAMGUI.py:3774
msgid "Set the language used throughout FlatCAM."
msgstr "Set the language used throughout FlatCAM."

#: flatcamGUI/FlatCAMGUI.py:3777
msgid "Apply Language"
msgstr "Apply Language"

#: flatcamGUI/FlatCAMGUI.py:3778
msgid ""
"Set the language used throughout FlatCAM.\n"
"The app will restart after click.Windows: When FlatCAM is installed in "
"Program Files\n"
"directory, it is possible that the app will not\n"
"restart after the button is clicked due of Windows\n"
"security features. In this case the language will be\n"
"applied at the next app start."
msgstr ""
"Set the language used throughout FlatCAM.\n"
"The app will restart after click.Windows: When FlatCAM is installed in "
"Program Files\n"
"directory, it is possible that the app will not\n"
"restart after the button is clicked due of Windows\n"
"security features. In this case the language will be\n"
"applied at the next app start."

#: flatcamGUI/FlatCAMGUI.py:3787
msgid "Shell at StartUp:"
msgstr "Shell at StartUp:"

#: flatcamGUI/FlatCAMGUI.py:3789 flatcamGUI/FlatCAMGUI.py:3794
msgid ""
"Check this box if you want the shell to\n"
"start automatically at startup."
msgstr ""
"Check this box if you want the shell to\n"
"start automatically at startup."

#: flatcamGUI/FlatCAMGUI.py:3799
msgid "Version Check:"
msgstr "Version Check:"

#: flatcamGUI/FlatCAMGUI.py:3801 flatcamGUI/FlatCAMGUI.py:3806
msgid ""
"Check this box if you want to check\n"
"for a new version automatically at startup."
msgstr ""
"Check this box if you want to check\n"
"for a new version automatically at startup."

#: flatcamGUI/FlatCAMGUI.py:3811
msgid "Send Stats:"
msgstr "Send Stats:"

#: flatcamGUI/FlatCAMGUI.py:3813 flatcamGUI/FlatCAMGUI.py:3818
msgid ""
"Check this box if you agree to send anonymous\n"
"stats automatically at startup, to help improve FlatCAM."
msgstr ""
"Check this box if you agree to send anonymous\n"
"stats automatically at startup, to help improve FlatCAM."

#: flatcamGUI/FlatCAMGUI.py:3825
msgid "<b>Pan Button:</b>"
msgstr "<b>Pan Button:</b>"

#: flatcamGUI/FlatCAMGUI.py:3826
msgid ""
"Select the mouse button to use for panning:\n"
"- MMB --> Middle Mouse Button\n"
"- RMB --> Right Mouse Button"
msgstr ""
"Select the mouse button to use for panning:\n"
"- MMB --> Middle Mouse Button\n"
"- RMB --> Right Mouse Button"

#: flatcamGUI/FlatCAMGUI.py:3833
msgid "<b>Multiple Sel:</b>"
msgstr "<b>Multiple Sel:</b>"

#: flatcamGUI/FlatCAMGUI.py:3834
msgid "Select the key used for multiple selection."
msgstr "Select the key used for multiple selection."

#: flatcamGUI/FlatCAMGUI.py:3839
msgid "Project at StartUp:"
msgstr "Project at StartUp:"

#: flatcamGUI/FlatCAMGUI.py:3841 flatcamGUI/FlatCAMGUI.py:3846
msgid ""
"Check this box if you want the project/selected/tool tab area to\n"
"to be shown automatically at startup."
msgstr ""
"Check this box if you want the project/selected/tool tab area to\n"
"to be shown automatically at startup."

#: flatcamGUI/FlatCAMGUI.py:3851
msgid "Project AutoHide:"
msgstr "Project AutoHide:"

#: flatcamGUI/FlatCAMGUI.py:3853 flatcamGUI/FlatCAMGUI.py:3859
msgid ""
"Check this box if you want the project/selected/tool tab area to\n"
"hide automatically when there are no objects loaded and\n"
"to show whenever a new object is created."
msgstr ""
"Check this box if you want the project/selected/tool tab area to\n"
"hide automatically when there are no objects loaded and\n"
"to show whenever a new object is created."

#: flatcamGUI/FlatCAMGUI.py:3865
msgid "<b>Enable ToolTips:</b>"
msgstr "<b>Enable ToolTips:</b>"

#: flatcamGUI/FlatCAMGUI.py:3867 flatcamGUI/FlatCAMGUI.py:3872
msgid ""
"Check this box if you want to have toolTips displayed\n"
"when hovering with mouse over items throughout the App."
msgstr ""
"Check this box if you want to have toolTips displayed\n"
"when hovering with mouse over items throughout the App."

#: flatcamGUI/FlatCAMGUI.py:3875
msgid "Workers number:"
msgstr "Workers number:"

#: flatcamGUI/FlatCAMGUI.py:3877 flatcamGUI/FlatCAMGUI.py:3886
msgid ""
"The number of Qthreads made available to the App.\n"
"A bigger number may finish the jobs more quickly but\n"
"depending on your computer speed, may make the App\n"
"unresponsive. Can have a value between 2 and 16.\n"
"Default value is 2.\n"
"After change, it will be applied at next App start."
msgstr ""
"The number of Qthreads made available to the App.\n"
"A bigger number may finish the jobs more quickly but\n"
"depending on your computer speed, may make the App\n"
"unresponsive. Can have a value between 2 and 16.\n"
"Default value is 2.\n"
"After change, it will be applied at next App start."

#: flatcamGUI/FlatCAMGUI.py:3898 flatcamGUI/FlatCAMGUI.py:3907
msgid ""
"This value can counter the effect of the Circle Steps\n"
"parameter. Default value is 0.01.\n"
"A lower value will increase the detail both in image\n"
"and in Gcode for the circles, with a higher cost in\n"
"performance. Higher value will provide more\n"
"performance at the expense of level of detail."
msgstr ""
"This value can counter the effect of the Circle Steps\n"
"parameter. Default value is 0.01.\n"
"A lower value will increase the detail both in image\n"
"and in Gcode for the circles, with a higher cost in\n"
"performance. Higher value will provide more\n"
"performance at the expense of level of detail."

#: flatcamGUI/FlatCAMGUI.py:3943
msgid "\"Open\" behavior"
msgstr "\"Open\" behavior"

#: flatcamGUI/FlatCAMGUI.py:3945
msgid ""
"When checked the path for the last saved file is used when saving files,\n"
"and the path for the last opened file is used when opening files.\n"
"\n"
"When unchecked the path for opening files is the one used last: either the\n"
"path for saving files or the path for opening files."
msgstr ""
"When checked the path for the last saved file is used when saving files,\n"
"and the path for the last opened file is used when opening files.\n"
"\n"
"When unchecked the path for opening files is the one used last: either the\n"
"path for saving files or the path for opening files."

#: flatcamGUI/FlatCAMGUI.py:3954
msgid "Save Compressed Project"
msgstr "Save Compressed Project"

#: flatcamGUI/FlatCAMGUI.py:3956
msgid ""
"Whether to save a compressed or uncompressed project.\n"
"When checked it will save a compressed FlatCAM project."
msgstr ""
"Whether to save a compressed or uncompressed project.\n"
"When checked it will save a compressed FlatCAM project."

#: flatcamGUI/FlatCAMGUI.py:3967
msgid "Compression Level:"
msgstr "Compression Level:"

#: flatcamGUI/FlatCAMGUI.py:3969
msgid ""
"The level of compression used when saving\n"
"a FlatCAM project. Higher value means better compression\n"
"but require more RAM usage and more processing time."
msgstr ""
"The level of compression used when saving\n"
"a FlatCAM project. Higher value means better compression\n"
"but require more RAM usage and more processing time."

#: flatcamGUI/FlatCAMGUI.py:3992
msgid "Gerber General"
msgstr "Gerber General"

#: flatcamGUI/FlatCAMGUI.py:3995 flatcamGUI/FlatCAMGUI.py:4361
#: flatcamGUI/FlatCAMGUI.py:5135 flatcamGUI/FlatCAMGUI.py:5504
#: flatcamGUI/ObjectUI.py:150 flatcamGUI/ObjectUI.py:505
#: flatcamGUI/ObjectUI.py:833 flatcamGUI/ObjectUI.py:1350
msgid "<b>Plot Options:</b>"
msgstr "<b>Plot Options:</b>"

#: flatcamGUI/FlatCAMGUI.py:4002 flatcamGUI/FlatCAMGUI.py:4373
#: flatcamGUI/ObjectUI.py:156 flatcamGUI/ObjectUI.py:506
msgid "Solid"
msgstr "Solid"

#: flatcamGUI/FlatCAMGUI.py:4004 flatcamGUI/ObjectUI.py:158
msgid "Solid color polygons."
msgstr "Solid color polygons."

#: flatcamGUI/FlatCAMGUI.py:4009 flatcamGUI/ObjectUI.py:164
msgid "M-Color"
msgstr "M-Color"

#: flatcamGUI/FlatCAMGUI.py:4011 flatcamGUI/ObjectUI.py:166
msgid "Draw polygons in different colors."
msgstr "Draw polygons in different colors."

#: flatcamGUI/FlatCAMGUI.py:4016 flatcamGUI/FlatCAMGUI.py:4367
#: flatcamGUI/FlatCAMGUI.py:5139 flatcamGUI/ObjectUI.py:172
msgid "Plot"
msgstr "Plot"

#: flatcamGUI/FlatCAMGUI.py:4018 flatcamGUI/FlatCAMGUI.py:5141
#: flatcamGUI/ObjectUI.py:174 flatcamGUI/ObjectUI.py:546
#: flatcamGUI/ObjectUI.py:879 flatcamGUI/ObjectUI.py:1450
msgid "Plot (show) this object."
msgstr "Plot (show) this object."

#: flatcamGUI/FlatCAMGUI.py:4023 flatcamGUI/FlatCAMGUI.py:5149
#: flatcamGUI/FlatCAMGUI.py:5587
msgid "Circle Steps:"
msgstr "Circle Steps:"

#: flatcamGUI/FlatCAMGUI.py:4025
msgid ""
"The number of circle steps for Gerber \n"
"circular aperture linear approximation."
msgstr ""
"The number of circle steps for Gerber \n"
"circular aperture linear approximation."

#: flatcamGUI/FlatCAMGUI.py:4040
msgid "Gerber Options"
msgstr "Gerber Options"

#: flatcamGUI/FlatCAMGUI.py:4043 flatcamGUI/ObjectUI.py:251
msgid "<b>Isolation Routing:</b>"
msgstr "<b>Isolation Routing:</b>"

#: flatcamGUI/FlatCAMGUI.py:4045 flatcamGUI/ObjectUI.py:253
msgid ""
"Create a Geometry object with\n"
"toolpaths to cut outside polygons."
msgstr ""
"Create a Geometry object with\n"
"toolpaths to cut outside polygons."

#: flatcamGUI/FlatCAMGUI.py:4056 flatcamGUI/FlatCAMGUI.py:4735
#: flatcamGUI/FlatCAMGUI.py:5876 flatcamGUI/ObjectUI.py:788
#: flatcamGUI/ObjectUI.py:804
msgid "Diameter of the cutting tool."
msgstr "Diameter of the cutting tool."

#: flatcamGUI/FlatCAMGUI.py:4063
msgid "Width (# passes):"
msgstr "Width (# passes):"

#: flatcamGUI/FlatCAMGUI.py:4065 flatcamGUI/ObjectUI.py:275
msgid ""
"Width of the isolation gap in\n"
"number (integer) of tool widths."
msgstr ""
"Width of the isolation gap in\n"
"number (integer) of tool widths."

#: flatcamGUI/FlatCAMGUI.py:4073 flatcamGUI/ObjectUI.py:283
msgid "Pass overlap:"
msgstr "Pass overlap:"

#: flatcamGUI/FlatCAMGUI.py:4075 flatcamGUI/ObjectUI.py:285
#, python-format
msgid ""
"How much (fraction) of the tool width to overlap each tool pass.\n"
"Example:\n"
"A value here of 0.25 means an overlap of 25% from the tool diameter found "
"above."
msgstr ""
"How much (fraction) of the tool width to overlap each tool pass.\n"
"Example:\n"
"A value here of 0.25 means an overlap of 25% from the tool diameter found "
"above."

#: flatcamGUI/FlatCAMGUI.py:4083 flatcamGUI/ObjectUI.py:295
msgid "Milling Type:"
msgstr "Milling Type:"

#: flatcamGUI/FlatCAMGUI.py:4085 flatcamGUI/ObjectUI.py:297
msgid ""
"Milling type:\n"
"- climb / best for precision milling and to reduce tool usage\n"
"- conventional / useful when there is no backlash compensation"
msgstr ""
"Milling type:\n"
"- climb / best for precision milling and to reduce tool usage\n"
"- conventional / useful when there is no backlash compensation"

#: flatcamGUI/FlatCAMGUI.py:4095
msgid "Combine Passes"
msgstr "Combine Passes"

#: flatcamGUI/FlatCAMGUI.py:4097 flatcamGUI/ObjectUI.py:309
msgid "Combine all passes into one object"
msgstr "Combine all passes into one object"

#: flatcamGUI/FlatCAMGUI.py:4102
msgid "<b>Clear non-copper:</b>"
msgstr "<b>Clear non-copper:</b>"

#: flatcamGUI/FlatCAMGUI.py:4104 flatcamGUI/FlatCAMGUI.py:5764
#: flatcamGUI/ObjectUI.py:386
msgid ""
"Create a Geometry object with\n"
"toolpaths to cut all non-copper regions."
msgstr ""
"Create a Geometry object with\n"
"toolpaths to cut all non-copper regions."

#: flatcamGUI/FlatCAMGUI.py:4113 flatcamGUI/FlatCAMGUI.py:4139
#: flatcamGUI/ObjectUI.py:430 flatcamGUI/ObjectUI.py:464
msgid "Boundary Margin:"
msgstr "Boundary Margin:"

#: flatcamGUI/FlatCAMGUI.py:4115 flatcamGUI/ObjectUI.py:432
msgid ""
"Specify the edge of the PCB\n"
"by drawing a box around all\n"
"objects with this minimum\n"
"distance."
msgstr ""
"Specify the edge of the PCB\n"
"by drawing a box around all\n"
"objects with this minimum\n"
"distance."

#: flatcamGUI/FlatCAMGUI.py:4125 flatcamGUI/FlatCAMGUI.py:4148
msgid "Rounded corners"
msgstr "Rounded corners"

#: flatcamGUI/FlatCAMGUI.py:4127
msgid ""
"Creates a Geometry objects with polygons\n"
"covering the copper-free areas of the PCB."
msgstr ""
"Creates a Geometry objects with polygons\n"
"covering the copper-free areas of the PCB."

#: flatcamGUI/FlatCAMGUI.py:4133 flatcamGUI/ObjectUI.py:454
msgid "<b>Bounding Box:</b>"
msgstr "<b>Bounding Box:</b>"

#: flatcamGUI/FlatCAMGUI.py:4141 flatcamGUI/ObjectUI.py:466
msgid ""
"Distance of the edges of the box\n"
"to the nearest polygon."
msgstr ""
"Distance of the edges of the box\n"
"to the nearest polygon."

#: flatcamGUI/FlatCAMGUI.py:4150 flatcamGUI/ObjectUI.py:476
msgid ""
"If the bounding box is \n"
"to have rounded corners\n"
"their radius is equal to\n"
"the margin."
msgstr ""
"If the bounding box is \n"
"to have rounded corners\n"
"their radius is equal to\n"
"the margin."

#: flatcamGUI/FlatCAMGUI.py:4164
msgid "Gerber Adv. Options"
msgstr "Gerber Adv. Options"

#: flatcamGUI/FlatCAMGUI.py:4167
msgid "<b>Advanced Param.:</b>"
msgstr "<b>Advanced Param.:</b>"

#: flatcamGUI/FlatCAMGUI.py:4169
msgid ""
"A list of Gerber advanced parameters.\n"
"Those parameters are available only for\n"
"Advanced App. Level."
msgstr ""
"A list of Gerber advanced parameters.\n"
"Those parameters are available only for\n"
"Advanced App. Level."

#: flatcamGUI/FlatCAMGUI.py:4179 flatcamGUI/ObjectUI.py:314
msgid "\"Follow\""
msgstr "\"Follow\""

#: flatcamGUI/FlatCAMGUI.py:4181 flatcamGUI/ObjectUI.py:316
msgid ""
"Generate a 'Follow' geometry.\n"
"This means that it will cut through\n"
"the middle of the trace."
msgstr ""
"Generate a 'Follow' geometry.\n"
"This means that it will cut through\n"
"the middle of the trace."

#: flatcamGUI/FlatCAMGUI.py:4188
msgid "Table Show/Hide"
msgstr "Table Show/Hide"

#: flatcamGUI/FlatCAMGUI.py:4190
msgid ""
"Toggle the display of the Gerber Apertures Table.\n"
"Also, on hide, it will delete all mark shapes\n"
"that are drawn on canvas."
msgstr ""
"Toggle the display of the Gerber Apertures Table.\n"
"Also, on hide, it will delete all mark shapes\n"
"that are drawn on canvas."

#: flatcamGUI/FlatCAMGUI.py:4229
msgid "Gerber Export"
msgstr "Gerber Export"

#: flatcamGUI/FlatCAMGUI.py:4232 flatcamGUI/FlatCAMGUI.py:4884
msgid "<b>Export Options:</b>"
msgstr "<b>Export Options:</b>"

#: flatcamGUI/FlatCAMGUI.py:4234
msgid ""
"The parameters set here are used in the file exported\n"
"when using the File -> Export -> Export Gerber menu entry."
msgstr ""
"The parameters set here are used in the file exported\n"
"when using the File -> Export -> Export Gerber menu entry."

#: flatcamGUI/FlatCAMGUI.py:4243 flatcamGUI/FlatCAMGUI.py:4895
msgid "<b>Units</b>:"
msgstr "<b>Units</b>:"

#: flatcamGUI/FlatCAMGUI.py:4245 flatcamGUI/FlatCAMGUI.py:4251
msgid "The units used in the Gerber file."
msgstr "The units used in the Gerber file."

#: flatcamGUI/FlatCAMGUI.py:4257 flatcamGUI/FlatCAMGUI.py:4909
msgid "<b>Int/Decimals:</b>"
msgstr "<b>Int/Decimals:</b>"

#: flatcamGUI/FlatCAMGUI.py:4259
msgid ""
"The number of digits in the whole part of the number\n"
"and in the fractional part of the number."
msgstr ""
"The number of digits in the whole part of the number\n"
"and in the fractional part of the number."

#: flatcamGUI/FlatCAMGUI.py:4270
msgid ""
"This numbers signify the number of digits in\n"
"the whole part of Gerber coordinates."
msgstr ""
"This numbers signify the number of digits in\n"
"the whole part of Gerber coordinates."

#: flatcamGUI/FlatCAMGUI.py:4284
msgid ""
"This numbers signify the number of digits in\n"
"the decimal part of Gerber coordinates."
msgstr ""
"This numbers signify the number of digits in\n"
"the decimal part of Gerber coordinates."

#: flatcamGUI/FlatCAMGUI.py:4293 flatcamGUI/FlatCAMGUI.py:4970
msgid "<b>Zeros</b>:"
msgstr "<b>Zeros</b>:"

#: flatcamGUI/FlatCAMGUI.py:4296 flatcamGUI/FlatCAMGUI.py:4306
msgid ""
"This sets the type of Gerber zeros.\n"
"If LZ then Leading Zeros are removed and\n"
"Trailing Zeros are kept.\n"
"If TZ is checked then Trailing Zeros are removed\n"
"and Leading Zeros are kept."
msgstr ""
"This sets the type of Gerber zeros.\n"
"If LZ then Leading Zeros are removed and\n"
"Trailing Zeros are kept.\n"
"If TZ is checked then Trailing Zeros are removed\n"
"and Leading Zeros are kept."

#: flatcamGUI/FlatCAMGUI.py:4326 flatcamGUI/FlatCAMGUI.py:5011
#: flatcamGUI/FlatCAMGUI.py:5470 flatcamGUI/FlatCAMGUI.py:5762
#: flatcamGUI/FlatCAMGUI.py:5863 flatcamGUI/FlatCAMGUI.py:5942
#: flatcamGUI/FlatCAMGUI.py:6001 flatcamGUI/FlatCAMGUI.py:6104
#: flatcamGUI/FlatCAMGUI.py:6165 flatcamGUI/FlatCAMGUI.py:6364
#: flatcamGUI/FlatCAMGUI.py:6491
msgid "<b>Parameters:</b>"
msgstr "<b>Parameters:</b>"

#: flatcamGUI/FlatCAMGUI.py:4328
msgid "A list of Gerber Editor parameters."
msgstr "A list of Gerber Editor parameters."

#: flatcamGUI/FlatCAMGUI.py:4336 flatcamGUI/FlatCAMGUI.py:5021
#: flatcamGUI/FlatCAMGUI.py:5480
msgid "Selection limit:"
msgstr "Selection limit:"

#: flatcamGUI/FlatCAMGUI.py:4338
msgid ""
"Set the number of selected Gerber geometry\n"
"items above which the utility geometry\n"
"becomes just a selection rectangle.\n"
"Increases the performance when moving a\n"
"large number of geometric elements."
msgstr ""
"Set the number of selected Gerber geometry\n"
"items above which the utility geometry\n"
"becomes just a selection rectangle.\n"
"Increases the performance when moving a\n"
"large number of geometric elements."

#: flatcamGUI/FlatCAMGUI.py:4358
msgid "Excellon General"
msgstr "Excellon General"

#: flatcamGUI/FlatCAMGUI.py:4380
msgid "<b>Excellon Format:</b>"
msgstr "<b>Excellon Format:</b>"

#: flatcamGUI/FlatCAMGUI.py:4382
msgid ""
"The NC drill files, usually named Excellon files\n"
"are files that can be found in different formats.\n"
"Here we set the format used when the provided\n"
"coordinates are not using period.\n"
"\n"
"Possible presets:\n"
"\n"
"PROTEUS 3:3 MM LZ\n"
"DipTrace 5:2 MM TZ\n"
"DipTrace 4:3 MM LZ\n"
"\n"
"EAGLE 3:3 MM TZ\n"
"EAGLE 4:3 MM TZ\n"
"EAGLE 2:5 INCH TZ\n"
"EAGLE 3:5 INCH TZ\n"
"\n"
"ALTIUM 2:4 INCH LZ\n"
"Sprint Layout 2:4 INCH LZ\n"
"KiCAD 3:5 INCH TZ"
msgstr ""
"The NC drill files, usually named Excellon files\n"
"are files that can be found in different formats.\n"
"Here we set the format used when the provided\n"
"coordinates are not using period.\n"
"\n"
"Possible presets:\n"
"\n"
"PROTEUS 3:3 MM LZ\n"
"DipTrace 5:2 MM TZ\n"
"DipTrace 4:3 MM LZ\n"
"\n"
"EAGLE 3:3 MM TZ\n"
"EAGLE 4:3 MM TZ\n"
"EAGLE 2:5 INCH TZ\n"
"EAGLE 3:5 INCH TZ\n"
"\n"
"ALTIUM 2:4 INCH LZ\n"
"Sprint Layout 2:4 INCH LZ\n"
"KiCAD 3:5 INCH TZ"

#: flatcamGUI/FlatCAMGUI.py:4407
msgid "INCH:"
msgstr "INCH:"

#: flatcamGUI/FlatCAMGUI.py:4410
msgid "Default values for INCH are 2:4"
msgstr "Default values for INCH are 2:4"

#: flatcamGUI/FlatCAMGUI.py:4418 flatcamGUI/FlatCAMGUI.py:4451
#: flatcamGUI/FlatCAMGUI.py:4924
msgid ""
"This numbers signify the number of digits in\n"
"the whole part of Excellon coordinates."
msgstr ""
"This numbers signify the number of digits in\n"
"the whole part of Excellon coordinates."

#: flatcamGUI/FlatCAMGUI.py:4432 flatcamGUI/FlatCAMGUI.py:4465
#: flatcamGUI/FlatCAMGUI.py:4938
msgid ""
"This numbers signify the number of digits in\n"
"the decimal part of Excellon coordinates."
msgstr ""
"This numbers signify the number of digits in\n"
"the decimal part of Excellon coordinates."

#: flatcamGUI/FlatCAMGUI.py:4440
msgid "METRIC:"
msgstr "METRIC:"

#: flatcamGUI/FlatCAMGUI.py:4443
msgid "Default values for METRIC are 3:3"
msgstr "Default values for METRIC are 3:3"

#: flatcamGUI/FlatCAMGUI.py:4474
msgid "Default <b>Zeros</b>:"
msgstr "Default <b>Zeros</b>:"

#: flatcamGUI/FlatCAMGUI.py:4477 flatcamGUI/FlatCAMGUI.py:4973
msgid ""
"This sets the type of Excellon zeros.\n"
"If LZ then Leading Zeros are kept and\n"
"Trailing Zeros are removed.\n"
"If TZ is checked then Trailing Zeros are kept\n"
"and Leading Zeros are removed."
msgstr ""
"This sets the type of Excellon zeros.\n"
"If LZ then Leading Zeros are kept and\n"
"Trailing Zeros are removed.\n"
"If TZ is checked then Trailing Zeros are kept\n"
"and Leading Zeros are removed."

#: flatcamGUI/FlatCAMGUI.py:4488
msgid ""
"This sets the default type of Excellon zeros.\n"
"If it is not detected in the parsed file the value here\n"
"will be used.If LZ then Leading Zeros are kept and\n"
"Trailing Zeros are removed.\n"
"If TZ is checked then Trailing Zeros are kept\n"
"and Leading Zeros are removed."
msgstr ""
"This sets the default type of Excellon zeros.\n"
"If it is not detected in the parsed file the value here\n"
"will be used.If LZ then Leading Zeros are kept and\n"
"Trailing Zeros are removed.\n"
"If TZ is checked then Trailing Zeros are kept\n"
"and Leading Zeros are removed."

#: flatcamGUI/FlatCAMGUI.py:4498
msgid "Default <b>Units</b>:"
msgstr "Default <b>Units</b>:"

#: flatcamGUI/FlatCAMGUI.py:4501
msgid ""
"This sets the default units of Excellon files.\n"
"If it is not detected in the parsed file the value here\n"
"will be used.Some Excellon files don't have an header\n"
"therefore this parameter will be used."
msgstr ""
"This sets the default units of Excellon files.\n"
"If it is not detected in the parsed file the value here\n"
"will be used.Some Excellon files don't have an header\n"
"therefore this parameter will be used."

#: flatcamGUI/FlatCAMGUI.py:4512
msgid ""
"This sets the units of Excellon files.\n"
"Some Excellon files don't have an header\n"
"therefore this parameter will be used."
msgstr ""
"This sets the units of Excellon files.\n"
"Some Excellon files don't have an header\n"
"therefore this parameter will be used."

#: flatcamGUI/FlatCAMGUI.py:4520
msgid "<b>Excellon Optimization:</b>"
msgstr "<b>Excellon Optimization:</b>"

#: flatcamGUI/FlatCAMGUI.py:4523
msgid "Algorithm:   "
msgstr "Algorithm:   "

#: flatcamGUI/FlatCAMGUI.py:4525 flatcamGUI/FlatCAMGUI.py:4539
msgid ""
"This sets the optimization type for the Excellon drill path.\n"
"If MH is checked then Google OR-Tools algorithm with MetaHeuristic\n"
"Guided Local Path is used. Default search time is 3sec.\n"
"Use set_sys excellon_search_time value Tcl Command to set other values.\n"
"If Basic is checked then Google OR-Tools Basic algorithm is used.\n"
"\n"
"If DISABLED, then FlatCAM works in 32bit mode and it uses \n"
"Travelling Salesman algorithm for path optimization."
msgstr ""
"This sets the optimization type for the Excellon drill path.\n"
"If MH is checked then Google OR-Tools algorithm with MetaHeuristic\n"
"Guided Local Path is used. Default search time is 3sec.\n"
"Use set_sys excellon_search_time value Tcl Command to set other values.\n"
"If Basic is checked then Google OR-Tools Basic algorithm is used.\n"
"\n"
"If DISABLED, then FlatCAM works in 32bit mode and it uses \n"
"Travelling Salesman algorithm for path optimization."

#: flatcamGUI/FlatCAMGUI.py:4550
msgid "Optimization Time:   "
msgstr "Optimization Time:   "

#: flatcamGUI/FlatCAMGUI.py:4553
msgid ""
"When OR-Tools Metaheuristic (MH) is enabled there is a\n"
"maximum threshold for how much time is spent doing the\n"
"path optimization. This max duration is set here.\n"
"In seconds."
msgstr ""
"When OR-Tools Metaheuristic (MH) is enabled there is a\n"
"maximum threshold for how much time is spent doing the\n"
"path optimization. This max duration is set here.\n"
"In seconds."

#: flatcamGUI/FlatCAMGUI.py:4596
msgid "Excellon Options"
msgstr "Excellon Options"

#: flatcamGUI/FlatCAMGUI.py:4599 flatcamGUI/ObjectUI.py:584
msgid "<b>Create CNC Job</b>"
msgstr "<b>Create CNC Job</b>"

#: flatcamGUI/FlatCAMGUI.py:4601
msgid ""
"Parameters used to create a CNC Job object\n"
"for this drill object."
msgstr ""
"Parameters used to create a CNC Job object\n"
"for this drill object."

#: flatcamGUI/FlatCAMGUI.py:4609 flatcamGUI/FlatCAMGUI.py:5196
#: flatcamGUI/FlatCAMGUI.py:6300 flatcamGUI/ObjectUI.py:595
#: flatcamGUI/ObjectUI.py:1062 flatcamTools/ToolCalculators.py:108
msgid "Cut Z:"
msgstr "Cut Z:"

#: flatcamGUI/FlatCAMGUI.py:4611 flatcamGUI/ObjectUI.py:597
msgid ""
"Drill depth (negative)\n"
"below the copper surface."
msgstr ""
"Drill depth (negative)\n"
"below the copper surface."

#: flatcamGUI/FlatCAMGUI.py:4618 flatcamGUI/FlatCAMGUI.py:5229
#: flatcamGUI/ObjectUI.py:605 flatcamGUI/ObjectUI.py:1098
msgid "Travel Z:"
msgstr "Travel Z:"

#: flatcamGUI/FlatCAMGUI.py:4620 flatcamGUI/ObjectUI.py:607
msgid ""
"Tool height when travelling\n"
"across the XY plane."
msgstr ""
"Tool height when travelling\n"
"across the XY plane."

#: flatcamGUI/FlatCAMGUI.py:4628 flatcamGUI/FlatCAMGUI.py:5239
msgid "Tool change:"
msgstr "Tool change:"

#: flatcamGUI/FlatCAMGUI.py:4630 flatcamGUI/FlatCAMGUI.py:5241
#: flatcamGUI/ObjectUI.py:617
msgid ""
"Include tool-change sequence\n"
"in G-Code (Pause for tool change)."
msgstr ""
"Include tool-change sequence\n"
"in G-Code (Pause for tool change)."

#: flatcamGUI/FlatCAMGUI.py:4637 flatcamGUI/FlatCAMGUI.py:5249
msgid "Toolchange Z:"
msgstr "Toolchange Z:"

#: flatcamGUI/FlatCAMGUI.py:4639 flatcamGUI/FlatCAMGUI.py:5251
msgid "Toolchange Z position."
msgstr "Toolchange Z position."

#: flatcamGUI/FlatCAMGUI.py:4645
msgid "Feedrate:"
msgstr "Feedrate:"

#: flatcamGUI/FlatCAMGUI.py:4647
msgid ""
"Tool speed while drilling\n"
"(in units per minute)."
msgstr ""
"Tool speed while drilling\n"
"(in units per minute)."

#: flatcamGUI/FlatCAMGUI.py:4655
msgid "Spindle Speed:"
msgstr "Spindle Speed:"

#: flatcamGUI/FlatCAMGUI.py:4657 flatcamGUI/FlatCAMGUI.py:5281
#: flatcamGUI/ObjectUI.py:684
msgid ""
"Speed of the spindle\n"
"in RPM (optional)"
msgstr ""
"Speed of the spindle\n"
"in RPM (optional)"

#: flatcamGUI/FlatCAMGUI.py:4665 flatcamGUI/FlatCAMGUI.py:5289
msgid "Spindle dir.:"
msgstr "Spindle dir.:"

#: flatcamGUI/FlatCAMGUI.py:4667 flatcamGUI/FlatCAMGUI.py:5291
msgid ""
"This sets the direction that the spindle is rotating.\n"
"It can be either:\n"
"- CW = clockwise or\n"
"- CCW = counter clockwise"
msgstr ""
"This sets the direction that the spindle is rotating.\n"
"It can be either:\n"
"- CW = clockwise or\n"
"- CCW = counter clockwise"

#: flatcamGUI/FlatCAMGUI.py:4679 flatcamGUI/FlatCAMGUI.py:5303
#: flatcamGUI/ObjectUI.py:692 flatcamGUI/ObjectUI.py:1224
msgid "Dwell:"
msgstr "Dwell:"

#: flatcamGUI/FlatCAMGUI.py:4681 flatcamGUI/FlatCAMGUI.py:5305
#: flatcamGUI/ObjectUI.py:694 flatcamGUI/ObjectUI.py:1227
msgid ""
"Pause to allow the spindle to reach its\n"
"speed before cutting."
msgstr ""
"Pause to allow the spindle to reach its\n"
"speed before cutting."

#: flatcamGUI/FlatCAMGUI.py:4684 flatcamGUI/FlatCAMGUI.py:5308
msgid "Duration:"
msgstr "Duration:"

#: flatcamGUI/FlatCAMGUI.py:4686 flatcamGUI/FlatCAMGUI.py:5310
#: flatcamGUI/ObjectUI.py:699 flatcamGUI/ObjectUI.py:1234
msgid "Number of milliseconds for spindle to dwell."
msgstr "Number of milliseconds for spindle to dwell."

#: flatcamGUI/FlatCAMGUI.py:4698 flatcamGUI/FlatCAMGUI.py:5320
#: flatcamGUI/ObjectUI.py:707
msgid "Postprocessor:"
msgstr "Postprocessor:"

#: flatcamGUI/FlatCAMGUI.py:4700
msgid ""
"The postprocessor file that dictates\n"
"gcode output."
msgstr ""
"The postprocessor file that dictates\n"
"gcode output."

#: flatcamGUI/FlatCAMGUI.py:4709
msgid "<b>Gcode:    </b>"
msgstr "<b>Gcode:    </b>"

#: flatcamGUI/FlatCAMGUI.py:4711
msgid ""
"Choose what to use for GCode generation:\n"
"'Drills', 'Slots' or 'Both'.\n"
"When choosing 'Slots' or 'Both', slots will be\n"
"converted to drills."
msgstr ""
"Choose what to use for GCode generation:\n"
"'Drills', 'Slots' or 'Both'.\n"
"When choosing 'Slots' or 'Both', slots will be\n"
"converted to drills."

#: flatcamGUI/FlatCAMGUI.py:4727 flatcamGUI/ObjectUI.py:772
msgid "<b>Mill Holes</b>"
msgstr "<b>Mill Holes</b>"

#: flatcamGUI/FlatCAMGUI.py:4729 flatcamGUI/ObjectUI.py:774
msgid "Create Geometry for milling holes."
msgstr "Create Geometry for milling holes."

#: flatcamGUI/FlatCAMGUI.py:4733
msgid "Drill Tool dia:"
msgstr "Drill Tool dia:"

#: flatcamGUI/FlatCAMGUI.py:4740
msgid "Slot Tool dia:"
msgstr "Slot Tool dia:"

#: flatcamGUI/FlatCAMGUI.py:4742
msgid ""
"Diameter of the cutting tool\n"
"when milling slots."
msgstr ""
"Diameter of the cutting tool\n"
"when milling slots."

#: flatcamGUI/FlatCAMGUI.py:4754
msgid "Defaults"
msgstr "Defaults"

#: flatcamGUI/FlatCAMGUI.py:4767
msgid "Excellon Adv. Options"
msgstr "Excellon Adv. Options"

#: flatcamGUI/FlatCAMGUI.py:4773 flatcamGUI/FlatCAMGUI.py:5343
msgid "<b>Advanced Options:</b>"
msgstr "<b>Advanced Options:</b>"

#: flatcamGUI/FlatCAMGUI.py:4775
msgid ""
"Parameters used to create a CNC Job object\n"
"for this drill object that are shown when App Level is Advanced."
msgstr ""
"Parameters used to create a CNC Job object\n"
"for this drill object that are shown when App Level is Advanced."

#: flatcamGUI/FlatCAMGUI.py:4783
msgid "Offset Z:"
msgstr "Offset Z:"

#: flatcamGUI/FlatCAMGUI.py:4785 flatcamGUI/ObjectUI.py:574
msgid ""
"Some drill bits (the larger ones) need to drill deeper\n"
"to create the desired exit hole diameter due of the tip shape.\n"
"The value here can compensate the Cut Z parameter."
msgstr ""
"Some drill bits (the larger ones) need to drill deeper\n"
"to create the desired exit hole diameter due of the tip shape.\n"
"The value here can compensate the Cut Z parameter."

#: flatcamGUI/FlatCAMGUI.py:4792 flatcamGUI/FlatCAMGUI.py:5354
msgid "Toolchange X,Y:"
msgstr "Toolchange X,Y:"

#: flatcamGUI/FlatCAMGUI.py:4794 flatcamGUI/FlatCAMGUI.py:5356
msgid "Toolchange X,Y position."
msgstr "Toolchange X,Y position."

#: flatcamGUI/FlatCAMGUI.py:4800 flatcamGUI/FlatCAMGUI.py:5363
#: flatcamGUI/ObjectUI.py:634
msgid "Start move Z:"
msgstr "Start move Z:"

#: flatcamGUI/FlatCAMGUI.py:4802
msgid ""
"Height of the tool just after start.\n"
"Delete the value if you don't need this feature."
msgstr ""
"Height of the tool just after start.\n"
"Delete the value if you don't need this feature."

#: flatcamGUI/FlatCAMGUI.py:4809 flatcamGUI/FlatCAMGUI.py:5373
#: flatcamGUI/ObjectUI.py:644 flatcamGUI/ObjectUI.py:1144
msgid "End move Z:"
msgstr "End move Z:"

#: flatcamGUI/FlatCAMGUI.py:4811 flatcamGUI/FlatCAMGUI.py:5375
msgid ""
"Height of the tool after\n"
"the last move at the end of the job."
msgstr ""
"Height of the tool after\n"
"the last move at the end of the job."

#: flatcamGUI/FlatCAMGUI.py:4818 flatcamGUI/FlatCAMGUI.py:5383
#: flatcamGUI/ObjectUI.py:665
msgid "Feedrate Rapids:"
msgstr "Feedrate Rapids:"

#: flatcamGUI/FlatCAMGUI.py:4820 flatcamGUI/ObjectUI.py:667
msgid ""
"Tool speed while drilling\n"
"(in units per minute).\n"
"This is for the rapid move G00.\n"
"It is useful only for Marlin,\n"
"ignore for any other cases."
msgstr ""
"Tool speed while drilling\n"
"(in units per minute).\n"
"This is for the rapid move G00.\n"
"It is useful only for Marlin,\n"
"ignore for any other cases."

#: flatcamGUI/FlatCAMGUI.py:4831 flatcamGUI/FlatCAMGUI.py:5407
#: flatcamGUI/ObjectUI.py:718 flatcamGUI/ObjectUI.py:1256
msgid "Probe Z depth:"
msgstr "Probe Z depth:"

#: flatcamGUI/FlatCAMGUI.py:4833 flatcamGUI/FlatCAMGUI.py:5409
#: flatcamGUI/ObjectUI.py:720 flatcamGUI/ObjectUI.py:1259
msgid ""
"The maximum depth that the probe is allowed\n"
"to probe. Negative value, in current units."
msgstr ""
"The maximum depth that the probe is allowed\n"
"to probe. Negative value, in current units."

#: flatcamGUI/FlatCAMGUI.py:4841 flatcamGUI/FlatCAMGUI.py:5417
#: flatcamGUI/ObjectUI.py:730 flatcamGUI/ObjectUI.py:1270
msgid "Feedrate Probe:"
msgstr "Feedrate Probe:"

#: flatcamGUI/FlatCAMGUI.py:4843 flatcamGUI/FlatCAMGUI.py:5419
#: flatcamGUI/ObjectUI.py:732 flatcamGUI/ObjectUI.py:1273
msgid "The feedrate used while the probe is probing."
msgstr "The feedrate used while the probe is probing."

#: flatcamGUI/FlatCAMGUI.py:4849 flatcamGUI/FlatCAMGUI.py:5426
msgid "Fast Plunge:"
msgstr "Fast Plunge:"

#: flatcamGUI/FlatCAMGUI.py:4851 flatcamGUI/FlatCAMGUI.py:5428
msgid ""
"By checking this, the vertical move from\n"
"Z_Toolchange to Z_move is done with G0,\n"
"meaning the fastest speed available.\n"
"WARNING: the move is done at Toolchange X,Y coords."
msgstr ""
"By checking this, the vertical move from\n"
"Z_Toolchange to Z_move is done with G0,\n"
"meaning the fastest speed available.\n"
"WARNING: the move is done at Toolchange X,Y coords."

#: flatcamGUI/FlatCAMGUI.py:4860
msgid "Fast Retract:"
msgstr "Fast Retract:"

#: flatcamGUI/FlatCAMGUI.py:4862
msgid ""
"Exit hole strategy.\n"
" - When uncheked, while exiting the drilled hole the drill bit\n"
"will travel slow, with set feedrate (G1), up to zero depth and then\n"
"travel as fast as possible (G0) to the Z Move (travel height).\n"
" - When checked the travel from Z cut (cut depth) to Z_move\n"
"(travel height) is done as fast as possible (G0) in one move."
msgstr ""
"Exit hole strategy.\n"
" - When uncheked, while exiting the drilled hole the drill bit\n"
"will travel slow, with set feedrate (G1), up to zero depth and then\n"
"travel as fast as possible (G0) to the Z Move (travel height).\n"
" - When checked the travel from Z cut (cut depth) to Z_move\n"
"(travel height) is done as fast as possible (G0) in one move."

#: flatcamGUI/FlatCAMGUI.py:4881
msgid "Excellon Export"
msgstr "Excellon Export"

#: flatcamGUI/FlatCAMGUI.py:4886
msgid ""
"The parameters set here are used in the file exported\n"
"when using the File -> Export -> Export Excellon menu entry."
msgstr ""
"The parameters set here are used in the file exported\n"
"when using the File -> Export -> Export Excellon menu entry."

#: flatcamGUI/FlatCAMGUI.py:4897 flatcamGUI/FlatCAMGUI.py:4903
msgid "The units used in the Excellon file."
msgstr "The units used in the Excellon file."

#: flatcamGUI/FlatCAMGUI.py:4911
msgid ""
"The NC drill files, usually named Excellon files\n"
"are files that can be found in different formats.\n"
"Here we set the format used when the provided\n"
"coordinates are not using period."
msgstr ""
"The NC drill files, usually named Excellon files\n"
"are files that can be found in different formats.\n"
"Here we set the format used when the provided\n"
"coordinates are not using period."

#: flatcamGUI/FlatCAMGUI.py:4947
msgid "<b>Format:</b>"
msgstr "<b>Format:</b>"

#: flatcamGUI/FlatCAMGUI.py:4949 flatcamGUI/FlatCAMGUI.py:4959
msgid ""
"Select the kind of coordinates format used.\n"
"Coordinates can be saved with decimal point or without.\n"
"When there is no decimal point, it is required to specify\n"
"the number of digits for integer part and the number of decimals.\n"
"Also it will have to be specified if LZ = leading zeros are kept\n"
"or TZ = trailing zeros are kept."
msgstr ""
"Select the kind of coordinates format used.\n"
"Coordinates can be saved with decimal point or without.\n"
"When there is no decimal point, it is required to specify\n"
"the number of digits for integer part and the number of decimals.\n"
"Also it will have to be specified if LZ = leading zeros are kept\n"
"or TZ = trailing zeros are kept."

#: flatcamGUI/FlatCAMGUI.py:4983
msgid ""
"This sets the default type of Excellon zeros.\n"
"If LZ then Leading Zeros are kept and\n"
"Trailing Zeros are removed.\n"
"If TZ is checked then Trailing Zeros are kept\n"
"and Leading Zeros are removed."
msgstr ""
"This sets the default type of Excellon zeros.\n"
"If LZ then Leading Zeros are kept and\n"
"Trailing Zeros are removed.\n"
"If TZ is checked then Trailing Zeros are kept\n"
"and Leading Zeros are removed."

#: flatcamGUI/FlatCAMGUI.py:5013
msgid "A list of Excellon Editor parameters."
msgstr "A list of Excellon Editor parameters."

#: flatcamGUI/FlatCAMGUI.py:5023
msgid ""
"Set the number of selected Excellon geometry\n"
"items above which the utility geometry\n"
"becomes just a selection rectangle.\n"
"Increases the performance when moving a\n"
"large number of geometric elements."
msgstr ""
"Set the number of selected Excellon geometry\n"
"items above which the utility geometry\n"
"becomes just a selection rectangle.\n"
"Increases the performance when moving a\n"
"large number of geometric elements."

#: flatcamGUI/FlatCAMGUI.py:5035
msgid "New Tool Dia:"
msgstr "New Tool Dia:"

#: flatcamGUI/FlatCAMGUI.py:5058
msgid "<b>Linear Drill Array:</b>"
msgstr "<b>Linear Drill Array:</b>"

#: flatcamGUI/FlatCAMGUI.py:5062
msgid "Linear Dir.:"
msgstr "Linear Dir.:"

#: flatcamGUI/FlatCAMGUI.py:5098
msgid "<b>Circular Drill Array:</b>"
msgstr "<b>Circular Drill Array:</b>"

#: flatcamGUI/FlatCAMGUI.py:5102
msgid "Circular Dir.:"
msgstr "Circular Dir.:"

#: flatcamGUI/FlatCAMGUI.py:5104
msgid ""
"Direction for circular array.\n"
"Can be CW = clockwise or CCW = counter clockwise."
msgstr ""
"Direction for circular array.\n"
"Can be CW = clockwise or CCW = counter clockwise."

#: flatcamGUI/FlatCAMGUI.py:5115
msgid "Circ. Angle:"
msgstr "Circ. Angle:"

#: flatcamGUI/FlatCAMGUI.py:5132
msgid "Geometry General"
msgstr "Geometry General"

#: flatcamGUI/FlatCAMGUI.py:5151
msgid ""
"The number of circle steps for <b>Geometry</b> \n"
"circle and arc shapes linear approximation."
msgstr ""
"The number of circle steps for <b>Geometry</b> \n"
"circle and arc shapes linear approximation."

#: flatcamGUI/FlatCAMGUI.py:5159
msgid "<b>Tools:</b>"
msgstr "<b>Tools:</b>"

#: flatcamGUI/FlatCAMGUI.py:5165 flatcamGUI/FlatCAMGUI.py:5774
msgid "Diameters of the cutting tools, separated by ','"
msgstr "Diameters of the cutting tools, separated by ','"

#: flatcamGUI/FlatCAMGUI.py:5179
msgid "Geometry Options"
msgstr "Geometry Options"

#: flatcamGUI/FlatCAMGUI.py:5184
msgid "<b>Create CNC Job:</b>"
msgstr "<b>Create CNC Job:</b>"

#: flatcamGUI/FlatCAMGUI.py:5186
msgid ""
"Create a CNC Job object\n"
"tracing the contours of this\n"
"Geometry object."
msgstr ""
"Create a CNC Job object\n"
"tracing the contours of this\n"
"Geometry object."

#: flatcamGUI/FlatCAMGUI.py:5198 flatcamGUI/ObjectUI.py:1065
msgid ""
"Cutting depth (negative)\n"
"below the copper surface."
msgstr ""
"Cutting depth (negative)\n"
"below the copper surface."

#: flatcamGUI/FlatCAMGUI.py:5206
msgid "Multidepth"
msgstr "Multidepth"

#: flatcamGUI/FlatCAMGUI.py:5208
msgid "Multidepth usage: True or False."
msgstr "Multidepth usage: True or False."

#: flatcamGUI/FlatCAMGUI.py:5213
msgid "Depth/Pass:"
msgstr "Depth/Pass:"

#: flatcamGUI/FlatCAMGUI.py:5215
msgid ""
"The depth to cut on each pass,\n"
"when multidepth is enabled.\n"
"It has positive value although\n"
"it is a fraction from the depth\n"
"which has negative value."
msgstr ""
"The depth to cut on each pass,\n"
"when multidepth is enabled.\n"
"It has positive value although\n"
"it is a fraction from the depth\n"
"which has negative value."

#: flatcamGUI/FlatCAMGUI.py:5231 flatcamGUI/ObjectUI.py:1101
msgid ""
"Height of the tool when\n"
"moving without cutting."
msgstr ""
"Height of the tool when\n"
"moving without cutting."

#: flatcamGUI/FlatCAMGUI.py:5258 flatcamGUI/ObjectUI.py:1156
msgid "Feed Rate X-Y:"
msgstr "Feed Rate X-Y:"

#: flatcamGUI/FlatCAMGUI.py:5260 flatcamGUI/ObjectUI.py:1159
msgid ""
"Cutting speed in the XY\n"
"plane in units per minute"
msgstr ""
"Cutting speed in the XY\n"
"plane in units per minute"

#: flatcamGUI/FlatCAMGUI.py:5268
msgid "Feed Rate Z:"
msgstr "Feed Rate Z:"

#: flatcamGUI/FlatCAMGUI.py:5270
msgid ""
"Cutting speed in the XY\n"
"plane in units per minute.\n"
"It is called also Plunge."
msgstr ""
"Cutting speed in the XY\n"
"plane in units per minute.\n"
"It is called also Plunge."

#: flatcamGUI/FlatCAMGUI.py:5279 flatcamGUI/ObjectUI.py:682
#: flatcamGUI/ObjectUI.py:1211
msgid "Spindle speed:"
msgstr "Spindle speed:"

#: flatcamGUI/FlatCAMGUI.py:5322
msgid ""
"The postprocessor file that dictates\n"
"Machine Code output."
msgstr ""
"The postprocessor file that dictates\n"
"Machine Code output."

#: flatcamGUI/FlatCAMGUI.py:5338
msgid "Geometry Adv. Options"
msgstr "Geometry Adv. Options"

#: flatcamGUI/FlatCAMGUI.py:5345
msgid ""
"Parameters to create a CNC Job object\n"
"tracing the contours of a Geometry object."
msgstr ""
"Parameters to create a CNC Job object\n"
"tracing the contours of a Geometry object."

#: flatcamGUI/FlatCAMGUI.py:5365
msgid ""
"Height of the tool just after starting the work.\n"
"Delete the value if you don't need this feature."
msgstr ""
"Height of the tool just after starting the work.\n"
"Delete the value if you don't need this feature."

#: flatcamGUI/FlatCAMGUI.py:5385
msgid ""
"Cutting speed in the XY plane\n"
"(in units per minute).\n"
"This is for the rapid move G00.\n"
"It is useful only for Marlin,\n"
"ignore for any other cases."
msgstr ""
"Cutting speed in the XY plane\n"
"(in units per minute).\n"
"This is for the rapid move G00.\n"
"It is useful only for Marlin,\n"
"ignore for any other cases."

#: flatcamGUI/FlatCAMGUI.py:5397
msgid "Re-cut 1st pt."
msgstr "Re-cut 1st pt."

#: flatcamGUI/FlatCAMGUI.py:5399 flatcamGUI/ObjectUI.py:1202
msgid ""
"In order to remove possible\n"
"copper leftovers where first cut\n"
"meet with last cut, we generate an\n"
"extended cut over the first cut section."
msgstr ""
"In order to remove possible\n"
"copper leftovers where first cut\n"
"meet with last cut, we generate an\n"
"extended cut over the first cut section."

#: flatcamGUI/FlatCAMGUI.py:5438
msgid "Seg. X size:"
msgstr "Seg. X size:"

#: flatcamGUI/FlatCAMGUI.py:5440
msgid ""
"The size of the trace segment on the X axis.\n"
"Useful for auto-leveling.\n"
"A value of 0 means no segmentation on the X axis."
msgstr ""
"The size of the trace segment on the X axis.\n"
"Useful for auto-leveling.\n"
"A value of 0 means no segmentation on the X axis."

#: flatcamGUI/FlatCAMGUI.py:5449
msgid "Seg. Y size:"
msgstr "Seg. Y size:"

#: flatcamGUI/FlatCAMGUI.py:5451
msgid ""
"The size of the trace segment on the Y axis.\n"
"Useful for auto-leveling.\n"
"A value of 0 means no segmentation on the Y axis."
msgstr ""
"The size of the trace segment on the Y axis.\n"
"Useful for auto-leveling.\n"
"A value of 0 means no segmentation on the Y axis."

#: flatcamGUI/FlatCAMGUI.py:5467
msgid "Geometry Editor"
msgstr "Geometry Editor"

#: flatcamGUI/FlatCAMGUI.py:5472
msgid "A list of Geometry Editor parameters."
msgstr "A list of Geometry Editor parameters."

#: flatcamGUI/FlatCAMGUI.py:5482
msgid ""
"Set the number of selected geometry\n"
"items above which the utility geometry\n"
"becomes just a selection rectangle.\n"
"Increases the performance when moving a\n"
"large number of geometric elements."
msgstr ""
"Set the number of selected geometry\n"
"items above which the utility geometry\n"
"becomes just a selection rectangle.\n"
"Increases the performance when moving a\n"
"large number of geometric elements."

#: flatcamGUI/FlatCAMGUI.py:5501
msgid "CNC Job General"
msgstr "CNC Job General"

#: flatcamGUI/FlatCAMGUI.py:5514 flatcamGUI/ObjectUI.py:544
#: flatcamGUI/ObjectUI.py:877 flatcamGUI/ObjectUI.py:1447
msgid "Plot Object"
msgstr "Plot Object"

#: flatcamGUI/FlatCAMGUI.py:5521
msgid "Plot kind:"
msgstr "Plot kind:"

#: flatcamGUI/FlatCAMGUI.py:5523 flatcamGUI/ObjectUI.py:1356
msgid ""
"This selects the kind of geometries on the canvas to plot.\n"
"Those can be either of type 'Travel' which means the moves\n"
"above the work piece or it can be of type 'Cut',\n"
"which means the moves that cut into the material."
msgstr ""
"This selects the kind of geometries on the canvas to plot.\n"
"Those can be either of type 'Travel' which means the moves\n"
"above the work piece or it can be of type 'Cut',\n"
"which means the moves that cut into the material."

#: flatcamGUI/FlatCAMGUI.py:5540
msgid "Display Annotation:"
msgstr "Display Annotation:"

#: flatcamGUI/FlatCAMGUI.py:5542 flatcamGUI/ObjectUI.py:1372
msgid ""
"This selects if to display text annotation on the plot.\n"
"When checked it will display numbers in order for each end\n"
"of a travel line."
msgstr ""
"This selects if to display text annotation on the plot.\n"
"When checked it will display numbers in order for each end\n"
"of a travel line."

#: flatcamGUI/FlatCAMGUI.py:5554
msgid "Annotation Size:"
msgstr "Annotation Size:"

#: flatcamGUI/FlatCAMGUI.py:5556
msgid "The font size of the annotation text. In pixels."
msgstr "The font size of the annotation text. In pixels."

#: flatcamGUI/FlatCAMGUI.py:5564
msgid "Annotation Color:"
msgstr "Annotation Color:"

#: flatcamGUI/FlatCAMGUI.py:5566
msgid "Set the font color for the annotation texts."
msgstr "Set the font color for the annotation texts."

#: flatcamGUI/FlatCAMGUI.py:5589
msgid ""
"The number of circle steps for <b>GCode</b> \n"
"circle and arc shapes linear approximation."
msgstr ""
"The number of circle steps for <b>GCode</b> \n"
"circle and arc shapes linear approximation."

#: flatcamGUI/FlatCAMGUI.py:5599
msgid ""
"Diameter of the tool to be\n"
"rendered in the plot."
msgstr ""
"Diameter of the tool to be\n"
"rendered in the plot."

#: flatcamGUI/FlatCAMGUI.py:5607
msgid "Coords dec.:"
msgstr "Coords dec.:"

#: flatcamGUI/FlatCAMGUI.py:5609
msgid ""
"The number of decimals to be used for \n"
"the X, Y, Z coordinates in CNC code (GCODE, etc.)"
msgstr ""
"The number of decimals to be used for \n"
"the X, Y, Z coordinates in CNC code (GCODE, etc.)"

#: flatcamGUI/FlatCAMGUI.py:5617
msgid "Feedrate dec.:"
msgstr "Feedrate dec.:"

#: flatcamGUI/FlatCAMGUI.py:5619
msgid ""
"The number of decimals to be used for \n"
"the Feedrate parameter in CNC code (GCODE, etc.)"
msgstr ""
"The number of decimals to be used for \n"
"the Feedrate parameter in CNC code (GCODE, etc.)"

#: flatcamGUI/FlatCAMGUI.py:5634
msgid "CNC Job Options"
msgstr "CNC Job Options"

#: flatcamGUI/FlatCAMGUI.py:5637 flatcamGUI/FlatCAMGUI.py:5678
msgid "<b>Export G-Code:</b>"
msgstr "<b>Export G-Code:</b>"

#: flatcamGUI/FlatCAMGUI.py:5639 flatcamGUI/FlatCAMGUI.py:5680
#: flatcamGUI/ObjectUI.py:1483
msgid ""
"Export and save G-Code to\n"
"make this object to a file."
msgstr ""
"Export and save G-Code to\n"
"make this object to a file."

#: flatcamGUI/FlatCAMGUI.py:5645
msgid "Prepend to G-Code:"
msgstr "Prepend to G-Code:"

#: flatcamGUI/FlatCAMGUI.py:5647
msgid ""
"Type here any G-Code commands you would\n"
"like to add at the beginning of the G-Code file."
msgstr ""
"Type here any G-Code commands you would\n"
"like to add at the beginning of the G-Code file."

#: flatcamGUI/FlatCAMGUI.py:5656
msgid "Append to G-Code:"
msgstr "Append to G-Code:"

#: flatcamGUI/FlatCAMGUI.py:5658 flatcamGUI/ObjectUI.py:1505
msgid ""
"Type here any G-Code commands you would\n"
"like to append to the generated file.\n"
"I.e.: M2 (End of program)"
msgstr ""
"Type here any G-Code commands you would\n"
"like to append to the generated file.\n"
"I.e.: M2 (End of program)"

#: flatcamGUI/FlatCAMGUI.py:5675
msgid "CNC Job Adv. Options"
msgstr "CNC Job Adv. Options"

#: flatcamGUI/FlatCAMGUI.py:5686 flatcamGUI/ObjectUI.py:1523
msgid "Toolchange G-Code:"
msgstr "Toolchange G-Code:"

#: flatcamGUI/FlatCAMGUI.py:5688
msgid ""
"Type here any G-Code commands you would\n"
"like to be executed when Toolchange event is encountered.\n"
"This will constitute a Custom Toolchange GCode,\n"
"or a Toolchange Macro."
msgstr ""
"Type here any G-Code commands you would\n"
"like to be executed when Toolchange event is encountered.\n"
"This will constitute a Custom Toolchange GCode,\n"
"or a Toolchange Macro."

#: flatcamGUI/FlatCAMGUI.py:5702 flatcamGUI/ObjectUI.py:1545
msgid "Use Toolchange Macro"
msgstr "Use Toolchange Macro"

#: flatcamGUI/FlatCAMGUI.py:5704 flatcamGUI/ObjectUI.py:1548
msgid ""
"Check this box if you want to use\n"
"a Custom Toolchange GCode (macro)."
msgstr ""
"Check this box if you want to use\n"
"a Custom Toolchange GCode (macro)."

#: flatcamGUI/FlatCAMGUI.py:5716 flatcamGUI/ObjectUI.py:1557
msgid ""
"A list of the FlatCAM variables that can be used\n"
"in the Toolchange event.\n"
"They have to be surrounded by the '%' symbol"
msgstr ""
"A list of the FlatCAM variables that can be used\n"
"in the Toolchange event.\n"
"They have to be surrounded by the '%' symbol"

#: flatcamGUI/FlatCAMGUI.py:5723 flatcamGUI/ObjectUI.py:1564
msgid "Parameters"
msgstr "Parameters"

#: flatcamGUI/FlatCAMGUI.py:5726 flatcamGUI/ObjectUI.py:1567
msgid "FlatCAM CNC parameters"
msgstr "FlatCAM CNC parameters"

#: flatcamGUI/FlatCAMGUI.py:5727 flatcamGUI/ObjectUI.py:1568
msgid "tool = tool number"
msgstr "tool = tool number"

#: flatcamGUI/FlatCAMGUI.py:5728 flatcamGUI/ObjectUI.py:1569
msgid "tooldia = tool diameter"
msgstr "tooldia = tool diameter"

#: flatcamGUI/FlatCAMGUI.py:5729 flatcamGUI/ObjectUI.py:1570
msgid "t_drills = for Excellon, total number of drills"
msgstr "t_drills = for Excellon, total number of drills"

#: flatcamGUI/FlatCAMGUI.py:5730 flatcamGUI/ObjectUI.py:1571
msgid "x_toolchange = X coord for Toolchange"
msgstr "x_toolchange = X coord for Toolchange"

#: flatcamGUI/FlatCAMGUI.py:5731 flatcamGUI/ObjectUI.py:1572
msgid "y_toolchange = Y coord for Toolchange"
msgstr "y_toolchange = Y coord for Toolchange"

#: flatcamGUI/FlatCAMGUI.py:5732 flatcamGUI/ObjectUI.py:1573
msgid "z_toolchange = Z coord for Toolchange"
msgstr "z_toolchange = Z coord for Toolchange"

#: flatcamGUI/FlatCAMGUI.py:5733
msgid "z_cut = Z depth for the cut"
msgstr "z_cut = Z depth for the cut"

#: flatcamGUI/FlatCAMGUI.py:5734
msgid "z_move = Z height for travel"
msgstr "z_move = Z height for travel"

#: flatcamGUI/FlatCAMGUI.py:5735 flatcamGUI/ObjectUI.py:1576
msgid "z_depthpercut = the step value for multidepth cut"
msgstr "z_depthpercut = the step value for multidepth cut"

#: flatcamGUI/FlatCAMGUI.py:5736 flatcamGUI/ObjectUI.py:1577
msgid "spindlesspeed = the value for the spindle speed"
msgstr "spindlesspeed = the value for the spindle speed"

#: flatcamGUI/FlatCAMGUI.py:5738 flatcamGUI/ObjectUI.py:1578
msgid "dwelltime = time to dwell to allow the spindle to reach it's set RPM"
msgstr "dwelltime = time to dwell to allow the spindle to reach it's set RPM"

#: flatcamGUI/FlatCAMGUI.py:5759
msgid "NCC Tool Options"
msgstr "NCC Tool Options"

#: flatcamGUI/FlatCAMGUI.py:5772 flatcamGUI/FlatCAMGUI.py:6502
msgid "Tools dia:"
msgstr "Tools dia:"

#: flatcamGUI/FlatCAMGUI.py:5782 flatcamTools/ToolNonCopperClear.py:167
#, python-format
msgid ""
"How much (fraction) of the tool width to overlap each tool pass.\n"
"Example:\n"
"A value here of 0.25 means 25% from the tool diameter found above.\n"
"\n"
"Adjust the value starting with lower values\n"
"and increasing it if areas that should be cleared are still \n"
"not cleared.\n"
"Lower values = faster processing, faster execution on PCB.\n"
"Higher values = slow processing and slow execution on CNC\n"
"due of too many paths."
msgstr ""
"How much (fraction) of the tool width to overlap each tool pass.\n"
"Example:\n"
"A value here of 0.25 means 25% from the tool diameter found above.\n"
"\n"
"Adjust the value starting with lower values\n"
"and increasing it if areas that should be cleared are still \n"
"not cleared.\n"
"Lower values = faster processing, faster execution on PCB.\n"
"Higher values = slow processing and slow execution on CNC\n"
"due of too many paths."

#: flatcamGUI/FlatCAMGUI.py:5798 flatcamTools/ToolNonCopperClear.py:183
msgid "Bounding box margin."
msgstr "Bounding box margin."

#: flatcamGUI/FlatCAMGUI.py:5807 flatcamTools/ToolNonCopperClear.py:192
#: flatcamTools/ToolPaint.py:190
msgid ""
"Algorithm for non-copper clearing:<BR><B>Standard</B>: Fixed step inwards."
"<BR><B>Seed-based</B>: Outwards from seed.<BR><B>Line-based</B>: Parallel "
"lines."
msgstr ""
"Algorithm for non-copper clearing:<BR><B>Standard</B>: Fixed step inwards."
"<BR><B>Seed-based</B>: Outwards from seed.<BR><B>Line-based</B>: Parallel "
"lines."

#: flatcamGUI/FlatCAMGUI.py:5839 flatcamTools/ToolNonCopperClear.py:224
#: flatcamTools/ToolPaint.py:222
msgid "Rest M.:"
msgstr "Rest M.:"

#: flatcamGUI/FlatCAMGUI.py:5841
msgid ""
"If checked, use 'rest machining'.\n"
"Basically it will clear copper outside PCB features,\n"
"using the biggest tool and continue with the next tools,\n"
"from bigger to smaller, to clear areas of copper that\n"
"could not be cleared by previous tool.\n"
"If not checked, use the standard algorithm."
msgstr ""
"If checked, use 'rest machining'.\n"
"Basically it will clear copper outside PCB features,\n"
"using the biggest tool and continue with the next tools,\n"
"from bigger to smaller, to clear areas of copper that\n"
"could not be cleared by previous tool.\n"
"If not checked, use the standard algorithm."

#: flatcamGUI/FlatCAMGUI.py:5860
msgid "Cutout Tool Options"
msgstr "Cutout Tool Options"

#: flatcamGUI/FlatCAMGUI.py:5865 flatcamGUI/ObjectUI.py:402
msgid ""
"Create toolpaths to cut around\n"
"the PCB and separate it from\n"
"the original board."
msgstr ""
"Create toolpaths to cut around\n"
"the PCB and separate it from\n"
"the original board."

#: flatcamGUI/FlatCAMGUI.py:5884
msgid ""
"Distance from objects at which\n"
"to draw the cutout."
msgstr ""
"Distance from objects at which\n"
"to draw the cutout."

#: flatcamGUI/FlatCAMGUI.py:5891 flatcamTools/ToolCutOut.py:96
msgid "Gap size:"
msgstr "Gap size:"

#: flatcamGUI/FlatCAMGUI.py:5893
msgid ""
"Size of the gaps in the toolpath\n"
"that will remain to hold the\n"
"board in place."
msgstr ""
"Size of the gaps in the toolpath\n"
"that will remain to hold the\n"
"board in place."

#: flatcamGUI/FlatCAMGUI.py:5901 flatcamTools/ToolCutOut.py:134
msgid "Gaps:"
msgstr "Gaps:"

#: flatcamGUI/FlatCAMGUI.py:5903
msgid ""
"Number of bridge gaps used for the cutout.\n"
"There can be maximum 8 bridges/gaps.\n"
"The choices are:\n"
"- lr    - left + right\n"
"- tb    - top + bottom\n"
"- 4     - left + right +top + bottom\n"
"- 2lr   - 2*left + 2*right\n"
"- 2tb  - 2*top + 2*bottom\n"
"- 8     - 2*left + 2*right +2*top + 2*bottom"
msgstr ""
"Number of bridge gaps used for the cutout.\n"
"There can be maximum 8 bridges/gaps.\n"
"The choices are:\n"
"- lr    - left + right\n"
"- tb    - top + bottom\n"
"- 4     - left + right +top + bottom\n"
"- 2lr   - 2*left + 2*right\n"
"- 2tb  - 2*top + 2*bottom\n"
"- 8     - 2*left + 2*right +2*top + 2*bottom"

#: flatcamGUI/FlatCAMGUI.py:5924 flatcamTools/ToolCutOut.py:115
msgid "Convex Sh.:"
msgstr "Convex Sh.:"

#: flatcamGUI/FlatCAMGUI.py:5926
msgid "Create a convex shape surrounding the entire PCB."
msgstr "Create a convex shape surrounding the entire PCB."

#: flatcamGUI/FlatCAMGUI.py:5939
msgid "2Sided Tool Options"
msgstr "2Sided Tool Options"

#: flatcamGUI/FlatCAMGUI.py:5944
msgid ""
"A tool to help in creating a double sided\n"
"PCB using alignment holes."
msgstr ""
"A tool to help in creating a double sided\n"
"PCB using alignment holes."

#: flatcamGUI/FlatCAMGUI.py:5954 flatcamTools/ToolDblSided.py:235
msgid "Drill diam.:"
msgstr "Drill diam.:"

#: flatcamGUI/FlatCAMGUI.py:5956 flatcamTools/ToolDblSided.py:226
#: flatcamTools/ToolDblSided.py:237
msgid "Diameter of the drill for the alignment holes."
msgstr "Diameter of the drill for the alignment holes."

#: flatcamGUI/FlatCAMGUI.py:5965 flatcamTools/ToolDblSided.py:120
msgid "Mirror Axis:"
msgstr "Mirror Axis:"

#: flatcamGUI/FlatCAMGUI.py:5967 flatcamTools/ToolDblSided.py:122
msgid "Mirror vertically (X) or horizontally (Y)."
msgstr "Mirror vertically (X) or horizontally (Y)."

#: flatcamGUI/FlatCAMGUI.py:5978 flatcamTools/ToolDblSided.py:133
msgid "Axis Ref:"
msgstr "Axis Ref:"

#: flatcamGUI/FlatCAMGUI.py:5980
msgid ""
"The axis should pass through a <b>point</b> or cut\n"
" a specified <b>box</b> (in a Geometry object) in \n"
"the middle."
msgstr ""
"The axis should pass through a <b>point</b> or cut\n"
" a specified <b>box</b> (in a Geometry object) in \n"
"the middle."

#: flatcamGUI/FlatCAMGUI.py:5996
msgid "Paint Tool Options"
msgstr "Paint Tool Options"

#: flatcamGUI/FlatCAMGUI.py:6003 flatcamGUI/ObjectUI.py:1305
msgid ""
"Creates tool paths to cover the\n"
"whole area of a polygon (remove\n"
"all copper). You will be asked\n"
"to click on the desired polygon."
msgstr ""
"Creates tool paths to cover the\n"
"whole area of a polygon (remove\n"
"all copper). You will be asked\n"
"to click on the desired polygon."

#: flatcamGUI/FlatCAMGUI.py:6027
msgid ""
"How much (fraction) of the tool\n"
"width to overlap each tool pass."
msgstr ""
"How much (fraction) of the tool\n"
"width to overlap each tool pass."

#: flatcamGUI/FlatCAMGUI.py:6081 flatcamTools/ToolPaint.py:237
msgid "Selection:"
msgstr "Selection:"

#: flatcamGUI/FlatCAMGUI.py:6083
msgid "How to select the polygons to paint."
msgstr "How to select the polygons to paint."

#: flatcamGUI/FlatCAMGUI.py:6101
msgid "Film Tool Options"
msgstr "Film Tool Options"

#: flatcamGUI/FlatCAMGUI.py:6106
msgid ""
"Create a PCB film from a Gerber or Geometry\n"
"FlatCAM object.\n"
"The file is saved in SVG format."
msgstr ""
"Create a PCB film from a Gerber or Geometry\n"
"FlatCAM object.\n"
"The file is saved in SVG format."

#: flatcamGUI/FlatCAMGUI.py:6117 flatcamTools/ToolFilm.py:116
msgid "Film Type:"
msgstr "Film Type:"

#: flatcamGUI/FlatCAMGUI.py:6119 flatcamTools/ToolFilm.py:118
msgid ""
"Generate a Positive black film or a Negative film.\n"
"Positive means that it will print the features\n"
"with black on a white canvas.\n"
"Negative means that it will print the features\n"
"with white on a black canvas.\n"
"The Film format is SVG."
msgstr ""
"Generate a Positive black film or a Negative film.\n"
"Positive means that it will print the features\n"
"with black on a white canvas.\n"
"Negative means that it will print the features\n"
"with white on a black canvas.\n"
"The Film format is SVG."

#: flatcamGUI/FlatCAMGUI.py:6130 flatcamTools/ToolFilm.py:130
msgid "Border:"
msgstr "Border:"

#: flatcamGUI/FlatCAMGUI.py:6132 flatcamTools/ToolFilm.py:132
msgid ""
"Specify a border around the object.\n"
"Only for negative film.\n"
"It helps if we use as a Box Object the same \n"
"object as in Film Object. It will create a thick\n"
"black bar around the actual print allowing for a\n"
"better delimitation of the outline features which are of\n"
"white color like the rest and which may confound with the\n"
"surroundings if not for this border."
msgstr ""
"Specify a border around the object.\n"
"Only for negative film.\n"
"It helps if we use as a Box Object the same \n"
"object as in Film Object. It will create a thick\n"
"black bar around the actual print allowing for a\n"
"better delimitation of the outline features which are of\n"
"white color like the rest and which may confound with the\n"
"surroundings if not for this border."

#: flatcamGUI/FlatCAMGUI.py:6145 flatcamTools/ToolFilm.py:144
msgid "Scale Stroke:"
msgstr "Scale Stroke:"

#: flatcamGUI/FlatCAMGUI.py:6147 flatcamTools/ToolFilm.py:146
msgid ""
"Scale the line stroke thickness of each feature in the SVG file.\n"
"It means that the line that envelope each SVG feature will be thicker or "
"thinner,\n"
"therefore the fine features may be more affected by this parameter."
msgstr ""
"Scale the line stroke thickness of each feature in the SVG file.\n"
"It means that the line that envelope each SVG feature will be thicker or "
"thinner,\n"
"therefore the fine features may be more affected by this parameter."

#: flatcamGUI/FlatCAMGUI.py:6162
msgid "Panelize Tool Options"
msgstr "Panelize Tool Options"

#: flatcamGUI/FlatCAMGUI.py:6167
msgid ""
"Create an object that contains an array of (x, y) elements,\n"
"each element is a copy of the source object spaced\n"
"at a X distance, Y distance of each other."
msgstr ""
"Create an object that contains an array of (x, y) elements,\n"
"each element is a copy of the source object spaced\n"
"at a X distance, Y distance of each other."

#: flatcamGUI/FlatCAMGUI.py:6178 flatcamTools/ToolPanelize.py:147
msgid "Spacing cols:"
msgstr "Spacing cols:"

#: flatcamGUI/FlatCAMGUI.py:6180 flatcamTools/ToolPanelize.py:149
msgid ""
"Spacing between columns of the desired panel.\n"
"In current units."
msgstr ""
"Spacing between columns of the desired panel.\n"
"In current units."

#: flatcamGUI/FlatCAMGUI.py:6188 flatcamTools/ToolPanelize.py:156
msgid "Spacing rows:"
msgstr "Spacing rows:"

#: flatcamGUI/FlatCAMGUI.py:6190 flatcamTools/ToolPanelize.py:158
msgid ""
"Spacing between rows of the desired panel.\n"
"In current units."
msgstr ""
"Spacing between rows of the desired panel.\n"
"In current units."

#: flatcamGUI/FlatCAMGUI.py:6198 flatcamTools/ToolPanelize.py:165
msgid "Columns:"
msgstr "Columns:"

#: flatcamGUI/FlatCAMGUI.py:6200 flatcamTools/ToolPanelize.py:167
msgid "Number of columns of the desired panel"
msgstr "Number of columns of the desired panel"

#: flatcamGUI/FlatCAMGUI.py:6207 flatcamTools/ToolPanelize.py:173
msgid "Rows:"
msgstr "Rows:"

#: flatcamGUI/FlatCAMGUI.py:6209 flatcamTools/ToolPanelize.py:175
msgid "Number of rows of the desired panel"
msgstr "Number of rows of the desired panel"

#: flatcamGUI/FlatCAMGUI.py:6217
msgid "Panel Type:"
msgstr "Panel Type:"

#: flatcamGUI/FlatCAMGUI.py:6219
msgid ""
"Choose the type of object for the panel object:\n"
"- Gerber\n"
"- Geometry"
msgstr ""
"Choose the type of object for the panel object:\n"
"- Gerber\n"
"- Geometry"

#: flatcamGUI/FlatCAMGUI.py:6228
msgid "Constrain within:"
msgstr "Constrain within:"

#: flatcamGUI/FlatCAMGUI.py:6230 flatcamTools/ToolPanelize.py:195
msgid ""
"Area define by DX and DY within to constrain the panel.\n"
"DX and DY values are in current units.\n"
"Regardless of how many columns and rows are desired,\n"
"the final panel will have as many columns and rows as\n"
"they fit completely within selected area."
msgstr ""
"Area define by DX and DY within to constrain the panel.\n"
"DX and DY values are in current units.\n"
"Regardless of how many columns and rows are desired,\n"
"the final panel will have as many columns and rows as\n"
"they fit completely within selected area."

#: flatcamGUI/FlatCAMGUI.py:6239 flatcamTools/ToolPanelize.py:204
msgid "Width (DX):"
msgstr "Width (DX):"

#: flatcamGUI/FlatCAMGUI.py:6241 flatcamTools/ToolPanelize.py:206
msgid ""
"The width (DX) within which the panel must fit.\n"
"In current units."
msgstr ""
"The width (DX) within which the panel must fit.\n"
"In current units."

#: flatcamGUI/FlatCAMGUI.py:6248 flatcamTools/ToolPanelize.py:212
msgid "Height (DY):"
msgstr "Height (DY):"

#: flatcamGUI/FlatCAMGUI.py:6250 flatcamTools/ToolPanelize.py:214
msgid ""
"The height (DY)within which the panel must fit.\n"
"In current units."
msgstr ""
"The height (DY)within which the panel must fit.\n"
"In current units."

#: flatcamGUI/FlatCAMGUI.py:6264
msgid "Calculators Tool Options"
msgstr "Calculators Tool Options"

#: flatcamGUI/FlatCAMGUI.py:6267
msgid "<b>V-Shape Tool Calculator:</b>"
msgstr "<b>V-Shape Tool Calculator:</b>"

#: flatcamGUI/FlatCAMGUI.py:6269
msgid ""
"Calculate the tool diameter for a given V-shape tool,\n"
"having the tip diameter, tip angle and\n"
"depth-of-cut as parameters."
msgstr ""
"Calculate the tool diameter for a given V-shape tool,\n"
"having the tip diameter, tip angle and\n"
"depth-of-cut as parameters."

#: flatcamGUI/FlatCAMGUI.py:6280 flatcamTools/ToolCalculators.py:94
msgid "Tip Diameter:"
msgstr "Tip Diameter:"

#: flatcamGUI/FlatCAMGUI.py:6282
msgid ""
"This is the tool tip diameter.\n"
"It is specified by manufacturer."
msgstr ""
"This is the tool tip diameter.\n"
"It is specified by manufacturer."

#: flatcamGUI/FlatCAMGUI.py:6290
msgid "Tip angle:"
msgstr "Tip angle:"

#: flatcamGUI/FlatCAMGUI.py:6292
msgid ""
"This is the angle on the tip of the tool.\n"
"It is specified by manufacturer."
msgstr ""
"This is the angle on the tip of the tool.\n"
"It is specified by manufacturer."

#: flatcamGUI/FlatCAMGUI.py:6302
msgid ""
"This is depth to cut into material.\n"
"In the CNCJob object it is the CutZ parameter."
msgstr ""
"This is depth to cut into material.\n"
"In the CNCJob object it is the CutZ parameter."

#: flatcamGUI/FlatCAMGUI.py:6309
msgid "<b>ElectroPlating Calculator:</b>"
msgstr "<b>ElectroPlating Calculator:</b>"

#: flatcamGUI/FlatCAMGUI.py:6311 flatcamTools/ToolCalculators.py:152
msgid ""
"This calculator is useful for those who plate the via/pad/drill holes,\n"
"using a method like grahite ink or calcium hypophosphite ink or palladium "
"chloride."
msgstr ""
"This calculator is useful for those who plate the via/pad/drill holes,\n"
"using a method like grahite ink or calcium hypophosphite ink or palladium "
"chloride."

#: flatcamGUI/FlatCAMGUI.py:6321 flatcamTools/ToolCalculators.py:161
msgid "Board Length:"
msgstr "Board Length:"

#: flatcamGUI/FlatCAMGUI.py:6323 flatcamTools/ToolCalculators.py:165
msgid "This is the board length. In centimeters."
msgstr "This is the board length. In centimeters."

#: flatcamGUI/FlatCAMGUI.py:6329 flatcamTools/ToolCalculators.py:167
msgid "Board Width:"
msgstr "Board Width:"

#: flatcamGUI/FlatCAMGUI.py:6331 flatcamTools/ToolCalculators.py:171
msgid "This is the board width.In centimeters."
msgstr "This is the board width.In centimeters."

#: flatcamGUI/FlatCAMGUI.py:6336 flatcamTools/ToolCalculators.py:173
msgid "Current Density:"
msgstr "Current Density:"

#: flatcamGUI/FlatCAMGUI.py:6339 flatcamTools/ToolCalculators.py:177
msgid ""
"Current density to pass through the board. \n"
"In Amps per Square Feet ASF."
msgstr ""
"Current density to pass through the board. \n"
"In Amps per Square Feet ASF."

#: flatcamGUI/FlatCAMGUI.py:6345 flatcamTools/ToolCalculators.py:181
msgid "Copper Growth:"
msgstr "Copper Growth:"

#: flatcamGUI/FlatCAMGUI.py:6348 flatcamTools/ToolCalculators.py:185
msgid ""
"How thick the copper growth is intended to be.\n"
"In microns."
msgstr ""
"How thick the copper growth is intended to be.\n"
"In microns."

#: flatcamGUI/FlatCAMGUI.py:6361
msgid "Transform Tool Options"
msgstr "Transform Tool Options"

#: flatcamGUI/FlatCAMGUI.py:6366
msgid ""
"Various transformations that can be applied\n"
"on a FlatCAM object."
msgstr ""
"Various transformations that can be applied\n"
"on a FlatCAM object."

#: flatcamGUI/FlatCAMGUI.py:6376
msgid "Rotate Angle:"
msgstr "Rotate Angle:"

#: flatcamGUI/FlatCAMGUI.py:6378
msgid "Angle for rotation. In degrees."
msgstr "Angle for rotation. In degrees."

#: flatcamGUI/FlatCAMGUI.py:6385
msgid "Skew_X angle:"
msgstr "Skew_X angle:"

#: flatcamGUI/FlatCAMGUI.py:6387
msgid "Angle for Skew/Shear on X axis. In degrees."
msgstr "Angle for Skew/Shear on X axis. In degrees."

#: flatcamGUI/FlatCAMGUI.py:6394
msgid "Skew_Y angle:"
msgstr "Skew_Y angle:"

#: flatcamGUI/FlatCAMGUI.py:6396
msgid "Angle for Skew/Shear on Y axis. In degrees."
msgstr "Angle for Skew/Shear on Y axis. In degrees."

#: flatcamGUI/FlatCAMGUI.py:6403
msgid "Scale_X factor:"
msgstr "Scale_X factor:"

#: flatcamGUI/FlatCAMGUI.py:6405
msgid "Factor for scaling on X axis."
msgstr "Factor for scaling on X axis."

#: flatcamGUI/FlatCAMGUI.py:6412
msgid "Scale_Y factor:"
msgstr "Scale_Y factor:"

#: flatcamGUI/FlatCAMGUI.py:6414
msgid "Factor for scaling on Y axis."
msgstr "Factor for scaling on Y axis."

#: flatcamGUI/FlatCAMGUI.py:6422
msgid ""
"Scale the selected object(s)\n"
"using the Scale_X factor for both axis."
msgstr ""
"Scale the selected object(s)\n"
"using the Scale_X factor for both axis."

#: flatcamGUI/FlatCAMGUI.py:6430 flatcamTools/ToolTransform.py:210
msgid ""
"Scale the selected object(s)\n"
"using the origin reference when checked,\n"
"and the center of the biggest bounding box\n"
"of the selected objects when unchecked."
msgstr ""
"Scale the selected object(s)\n"
"using the origin reference when checked,\n"
"and the center of the biggest bounding box\n"
"of the selected objects when unchecked."

#: flatcamGUI/FlatCAMGUI.py:6439
msgid "Offset_X val:"
msgstr "Offset_X val:"

#: flatcamGUI/FlatCAMGUI.py:6441
msgid "Distance to offset on X axis. In current units."
msgstr "Distance to offset on X axis. In current units."

#: flatcamGUI/FlatCAMGUI.py:6448
msgid "Offset_Y val:"
msgstr "Offset_Y val:"

#: flatcamGUI/FlatCAMGUI.py:6450
msgid "Distance to offset on Y axis. In current units."
msgstr "Distance to offset on Y axis. In current units."

#: flatcamGUI/FlatCAMGUI.py:6456
msgid "Mirror Reference"
msgstr "Mirror Reference"

#: flatcamGUI/FlatCAMGUI.py:6458 flatcamTools/ToolTransform.py:314
msgid ""
"Flip the selected object(s)\n"
"around the point in Point Entry Field.\n"
"\n"
"The point coordinates can be captured by\n"
"left click on canvas together with pressing\n"
"SHIFT key. \n"
"Then click Add button to insert coordinates.\n"
"Or enter the coords in format (x, y) in the\n"
"Point Entry field and click Flip on X(Y)"
msgstr ""
"Flip the selected object(s)\n"
"around the point in Point Entry Field.\n"
"\n"
"The point coordinates can be captured by\n"
"left click on canvas together with pressing\n"
"SHIFT key. \n"
"Then click Add button to insert coordinates.\n"
"Or enter the coords in format (x, y) in the\n"
"Point Entry field and click Flip on X(Y)"

#: flatcamGUI/FlatCAMGUI.py:6469
msgid " Mirror Ref. Point:"
msgstr " Mirror Ref. Point:"

#: flatcamGUI/FlatCAMGUI.py:6471 flatcamTools/ToolTransform.py:327
msgid ""
"Coordinates in format (x, y) used as reference for mirroring.\n"
"The 'x' in (x, y) will be used when using Flip on X and\n"
"the 'y' in (x, y) will be used when using Flip on Y and"
msgstr ""
"Coordinates in format (x, y) used as reference for mirroring.\n"
"The 'x' in (x, y) will be used when using Flip on X and\n"
"the 'y' in (x, y) will be used when using Flip on Y and"

#: flatcamGUI/FlatCAMGUI.py:6488
msgid "SolderPaste Tool Options"
msgstr "SolderPaste Tool Options"

#: flatcamGUI/FlatCAMGUI.py:6493
msgid ""
"A tool to create GCode for dispensing\n"
"solder paste onto a PCB."
msgstr ""
"A tool to create GCode for dispensing\n"
"solder paste onto a PCB."

#: flatcamGUI/FlatCAMGUI.py:6504
msgid "Diameters of nozzle tools, separated by ','"
msgstr "Diameters of nozzle tools, separated by ','"

#: flatcamGUI/FlatCAMGUI.py:6511
msgid "<b>New Nozzle Dia:</b>"
msgstr "<b>New Nozzle Dia:</b>"

#: flatcamGUI/FlatCAMGUI.py:6513 flatcamTools/ToolSolderPaste.py:103
msgid "Diameter for the new Nozzle tool to add in the Tool Table"
msgstr "Diameter for the new Nozzle tool to add in the Tool Table"

#: flatcamGUI/FlatCAMGUI.py:6521 flatcamTools/ToolSolderPaste.py:166
msgid "Z Dispense Start:"
msgstr "Z Dispense Start:"

#: flatcamGUI/FlatCAMGUI.py:6523 flatcamTools/ToolSolderPaste.py:168
msgid "The height (Z) when solder paste dispensing starts."
msgstr "The height (Z) when solder paste dispensing starts."

#: flatcamGUI/FlatCAMGUI.py:6530 flatcamTools/ToolSolderPaste.py:174
msgid "Z Dispense:"
msgstr "Z Dispense:"

#: flatcamGUI/FlatCAMGUI.py:6532 flatcamTools/ToolSolderPaste.py:176
msgid "The height (Z) when doing solder paste dispensing."
msgstr "The height (Z) when doing solder paste dispensing."

#: flatcamGUI/FlatCAMGUI.py:6539 flatcamTools/ToolSolderPaste.py:183
msgid "Z Dispense Stop:"
msgstr "Z Dispense Stop:"

#: flatcamGUI/FlatCAMGUI.py:6541 flatcamTools/ToolSolderPaste.py:185
msgid "The height (Z) when solder paste dispensing stops."
msgstr "The height (Z) when solder paste dispensing stops."

#: flatcamGUI/FlatCAMGUI.py:6548 flatcamTools/ToolSolderPaste.py:191
msgid "Z Travel:"
msgstr "Z Travel:"

#: flatcamGUI/FlatCAMGUI.py:6550 flatcamTools/ToolSolderPaste.py:193
msgid ""
"The height (Z) for travel between pads\n"
"(without dispensing solder paste)."
msgstr ""
"The height (Z) for travel between pads\n"
"(without dispensing solder paste)."

#: flatcamGUI/FlatCAMGUI.py:6558 flatcamTools/ToolSolderPaste.py:200
msgid "Z Toolchange:"
msgstr "Z Toolchange:"

#: flatcamGUI/FlatCAMGUI.py:6560 flatcamTools/ToolSolderPaste.py:202
msgid "The height (Z) for tool (nozzle) change."
msgstr "The height (Z) for tool (nozzle) change."

#: flatcamGUI/FlatCAMGUI.py:6567 flatcamTools/ToolSolderPaste.py:208
msgid "XY Toolchange:"
msgstr "XY Toolchange:"

#: flatcamGUI/FlatCAMGUI.py:6569 flatcamTools/ToolSolderPaste.py:210
msgid ""
"The X,Y location for tool (nozzle) change.\n"
"The format is (x, y) where x and y are real numbers."
msgstr ""
"The X,Y location for tool (nozzle) change.\n"
"The format is (x, y) where x and y are real numbers."

#: flatcamGUI/FlatCAMGUI.py:6577 flatcamTools/ToolSolderPaste.py:217
msgid "Feedrate X-Y:"
msgstr "Feedrate X-Y:"

#: flatcamGUI/FlatCAMGUI.py:6579 flatcamTools/ToolSolderPaste.py:219
msgid "Feedrate (speed) while moving on the X-Y plane."
msgstr "Feedrate (speed) while moving on the X-Y plane."

#: flatcamGUI/FlatCAMGUI.py:6586 flatcamTools/ToolSolderPaste.py:225
msgid "Feedrate Z:"
msgstr "Feedrate Z:"

#: flatcamGUI/FlatCAMGUI.py:6588 flatcamTools/ToolSolderPaste.py:227
msgid ""
"Feedrate (speed) while moving vertically\n"
"(on Z plane)."
msgstr ""
"Feedrate (speed) while moving vertically\n"
"(on Z plane)."

#: flatcamGUI/FlatCAMGUI.py:6596 flatcamTools/ToolSolderPaste.py:234
msgid "Feedrate Z Dispense:"
msgstr "Feedrate Z Dispense:"

#: flatcamGUI/FlatCAMGUI.py:6598
msgid ""
"Feedrate (speed) while moving up vertically\n"
"to Dispense position (on Z plane)."
msgstr ""
"Feedrate (speed) while moving up vertically\n"
"to Dispense position (on Z plane)."

#: flatcamGUI/FlatCAMGUI.py:6606 flatcamTools/ToolSolderPaste.py:243
msgid "Spindle Speed FWD:"
msgstr "Spindle Speed FWD:"

#: flatcamGUI/FlatCAMGUI.py:6608 flatcamTools/ToolSolderPaste.py:245
msgid ""
"The dispenser speed while pushing solder paste\n"
"through the dispenser nozzle."
msgstr ""
"The dispenser speed while pushing solder paste\n"
"through the dispenser nozzle."

#: flatcamGUI/FlatCAMGUI.py:6616 flatcamTools/ToolSolderPaste.py:252
msgid "Dwell FWD:"
msgstr "Dwell FWD:"

#: flatcamGUI/FlatCAMGUI.py:6618 flatcamTools/ToolSolderPaste.py:254
msgid "Pause after solder dispensing."
msgstr "Pause after solder dispensing."

#: flatcamGUI/FlatCAMGUI.py:6625 flatcamTools/ToolSolderPaste.py:260
msgid "Spindle Speed REV:"
msgstr "Spindle Speed REV:"

#: flatcamGUI/FlatCAMGUI.py:6627 flatcamTools/ToolSolderPaste.py:262
msgid ""
"The dispenser speed while retracting solder paste\n"
"through the dispenser nozzle."
msgstr ""
"The dispenser speed while retracting solder paste\n"
"through the dispenser nozzle."

#: flatcamGUI/FlatCAMGUI.py:6635 flatcamTools/ToolSolderPaste.py:269
msgid "Dwell REV:"
msgstr "Dwell REV:"

#: flatcamGUI/FlatCAMGUI.py:6637 flatcamTools/ToolSolderPaste.py:271
msgid ""
"Pause after solder paste dispenser retracted,\n"
"to allow pressure equilibrium."
msgstr ""
"Pause after solder paste dispenser retracted,\n"
"to allow pressure equilibrium."

#: flatcamGUI/FlatCAMGUI.py:6644 flatcamTools/ToolSolderPaste.py:277
msgid "PostProcessors:"
msgstr "PostProcessors:"

#: flatcamGUI/FlatCAMGUI.py:6646 flatcamTools/ToolSolderPaste.py:279
msgid "Files that control the GCode generation."
msgstr "Files that control the GCode generation."

#: flatcamGUI/FlatCAMGUI.py:6676 flatcamGUI/FlatCAMGUI.py:6682
msgid "Idle."
msgstr "Idle."

#: flatcamGUI/FlatCAMGUI.py:6706
msgid "Application started ..."
msgstr "Application started ..."

#: flatcamGUI/FlatCAMGUI.py:6707
msgid "Hello!"
msgstr "Hello!"

#: flatcamGUI/ObjectUI.py:33
msgid "FlatCAM Object"
msgstr "FlatCAM Object"

#: flatcamGUI/ObjectUI.py:58
msgid ""
"BASIC is suitable for a beginner. Many parameters\n"
"are hidden from the user in this mode.\n"
"ADVANCED mode will make available all parameters.\n"
"\n"
"To change the application LEVEL, go to:\n"
"Edit -> Preferences -> General and check:\n"
"'APP. LEVEL' radio button."
msgstr ""
"BASIC is suitable for a beginner. Many parameters\n"
"are hidden from the user in this mode.\n"
"ADVANCED mode will make available all parameters.\n"
"\n"
"To change the application LEVEL, go to:\n"
"Edit -> Preferences -> General and check:\n"
"'APP. LEVEL' radio button."

#: flatcamGUI/ObjectUI.py:79
msgid "<b>Scale:</b>"
msgstr "<b>Scale:</b>"

#: flatcamGUI/ObjectUI.py:81
msgid "Change the size of the object."
msgstr "Change the size of the object."

#: flatcamGUI/ObjectUI.py:89
msgid "Factor:"
msgstr "Factor:"

#: flatcamGUI/ObjectUI.py:91
msgid ""
"Factor by which to multiply\n"
"geometric features of this object."
msgstr ""
"Factor by which to multiply\n"
"geometric features of this object."

#: flatcamGUI/ObjectUI.py:102
msgid "Perform scaling operation."
msgstr "Perform scaling operation."

#: flatcamGUI/ObjectUI.py:108
msgid "<b>Offset:</b>"
msgstr "<b>Offset:</b>"

#: flatcamGUI/ObjectUI.py:110
msgid "Change the position of this object."
msgstr "Change the position of this object."

#: flatcamGUI/ObjectUI.py:117
msgid "Vector:"
msgstr "Vector:"

#: flatcamGUI/ObjectUI.py:119
msgid ""
"Amount by which to move the object\n"
"in the x and y axes in (x, y) format."
msgstr ""
"Amount by which to move the object\n"
"in the x and y axes in (x, y) format."

#: flatcamGUI/ObjectUI.py:129
msgid "Perform the offset operation."
msgstr "Perform the offset operation."

#: flatcamGUI/ObjectUI.py:143
msgid "Gerber Object"
msgstr "Gerber Object"

#: flatcamGUI/ObjectUI.py:182 flatcamGUI/ObjectUI.py:517
#: flatcamGUI/ObjectUI.py:839 flatcamGUI/ObjectUI.py:1382
msgid "<b>Name:</b>"
msgstr "<b>Name:</b>"

#: flatcamGUI/ObjectUI.py:203
msgid ""
"Toggle the display of the Gerber Apertures Table.\n"
"When unchecked, it will delete all mark shapes\n"
"that are drawn on canvas."
msgstr ""
"Toggle the display of the Gerber Apertures Table.\n"
"When unchecked, it will delete all mark shapes\n"
"that are drawn on canvas."

#: flatcamGUI/ObjectUI.py:214
msgid "Mark All"
msgstr "Mark All"

#: flatcamGUI/ObjectUI.py:216
msgid ""
"When checked it will display all the apertures.\n"
"When unchecked, it will delete all mark shapes\n"
"that are drawn on canvas."
msgstr ""
"When checked it will display all the apertures.\n"
"When unchecked, it will delete all mark shapes\n"
"that are drawn on canvas."

#: flatcamGUI/ObjectUI.py:244
msgid "Mark the aperture instances on canvas."
msgstr "Mark the aperture instances on canvas."

#: flatcamGUI/ObjectUI.py:262
msgid ""
"Diameter of the cutting tool.\n"
"If you want to have an isolation path\n"
"inside the actual shape of the Gerber\n"
"feature, use a negative value for\n"
"this parameter."
msgstr ""
"Diameter of the cutting tool.\n"
"If you want to have an isolation path\n"
"inside the actual shape of the Gerber\n"
"feature, use a negative value for\n"
"this parameter."

#: flatcamGUI/ObjectUI.py:273
msgid "Passes:"
msgstr "Passes:"

#: flatcamGUI/ObjectUI.py:307
msgid "Combine"
msgstr "Combine"

#: flatcamGUI/ObjectUI.py:323
msgid "<b>Generate Isolation Geometry:</b>"
msgstr "<b>Generate Isolation Geometry:</b>"

#: flatcamGUI/ObjectUI.py:325
msgid ""
"Create a Geometry object with toolpaths to cut \n"
"isolation outside, inside or on both sides of the\n"
"object. For a Gerber object outside means outside\n"
"of the Gerber feature and inside means inside of\n"
"the Gerber feature, if possible at all. This means\n"
"that only if the Gerber feature has openings inside, they\n"
"will be isolated. If what is wanted is to cut isolation\n"
"inside the actual Gerber feature, use a negative tool\n"
"diameter above."
msgstr ""
"Create a Geometry object with toolpaths to cut \n"
"isolation outside, inside or on both sides of the\n"
"object. For a Gerber object outside means outside\n"
"of the Gerber feature and inside means inside of\n"
"the Gerber feature, if possible at all. This means\n"
"that only if the Gerber feature has openings inside, they\n"
"will be isolated. If what is wanted is to cut isolation\n"
"inside the actual Gerber feature, use a negative tool\n"
"diameter above."

#: flatcamGUI/ObjectUI.py:344
msgid "FULL Geo"
msgstr "FULL Geo"

#: flatcamGUI/ObjectUI.py:346
msgid ""
"Create the Geometry Object\n"
"for isolation routing. It contains both\n"
"the interiors and exteriors geometry."
msgstr ""
"Create the Geometry Object\n"
"for isolation routing. It contains both\n"
"the interiors and exteriors geometry."

#: flatcamGUI/ObjectUI.py:355
msgid "Ext Geo"
msgstr "Ext Geo"

#: flatcamGUI/ObjectUI.py:357
msgid ""
"Create the Geometry Object\n"
"for isolation routing containing\n"
"only the exteriors geometry."
msgstr ""
"Create the Geometry Object\n"
"for isolation routing containing\n"
"only the exteriors geometry."

#: flatcamGUI/ObjectUI.py:364
msgid "Int Geo"
msgstr "Int Geo"

#: flatcamGUI/ObjectUI.py:366
msgid ""
"Create the Geometry Object\n"
"for isolation routing containing\n"
"only the interiors geometry."
msgstr ""
"Create the Geometry Object\n"
"for isolation routing containing\n"
"only the interiors geometry."

#: flatcamGUI/ObjectUI.py:384
msgid "<b>Clear N-copper:</b>"
msgstr "<b>Clear N-copper:</b>"

#: flatcamGUI/ObjectUI.py:394 flatcamTools/ToolNonCopperClear.py:240
msgid ""
"Create the Geometry Object\n"
"for non-copper routing."
msgstr ""
"Create the Geometry Object\n"
"for non-copper routing."

#: flatcamGUI/ObjectUI.py:400
msgid "<b>Board cutout:</b>"
msgstr "<b>Board cutout:</b>"

#: flatcamGUI/ObjectUI.py:408 flatcamTools/ToolCutOut.py:313
msgid "Cutout Tool"
msgstr "Cutout Tool"

#: flatcamGUI/ObjectUI.py:410
msgid ""
"Generate the geometry for\n"
"the board cutout."
msgstr ""
"Generate the geometry for\n"
"the board cutout."

#: flatcamGUI/ObjectUI.py:416
msgid "<b>Non-copper regions:</b>"
msgstr "<b>Non-copper regions:</b>"

#: flatcamGUI/ObjectUI.py:418
msgid ""
"Create polygons covering the\n"
"areas without copper on the PCB.\n"
"Equivalent to the inverse of this\n"
"object. Can be used to remove all\n"
"copper from a specified region."
msgstr ""
"Create polygons covering the\n"
"areas without copper on the PCB.\n"
"Equivalent to the inverse of this\n"
"object. Can be used to remove all\n"
"copper from a specified region."

#: flatcamGUI/ObjectUI.py:443 flatcamGUI/ObjectUI.py:474
msgid "Rounded Geo"
msgstr "Rounded Geo"

#: flatcamGUI/ObjectUI.py:445
msgid "Resulting geometry will have rounded corners."
msgstr "Resulting geometry will have rounded corners."

#: flatcamGUI/ObjectUI.py:450 flatcamGUI/ObjectUI.py:484
#: flatcamTools/ToolCutOut.py:168 flatcamTools/ToolCutOut.py:188
#: flatcamTools/ToolCutOut.py:239 flatcamTools/ToolSolderPaste.py:127
msgid "Generate Geo"
msgstr "Generate Geo"

#: flatcamGUI/ObjectUI.py:456
msgid ""
"Create a geometry surrounding the Gerber object.\n"
"Square shape."
msgstr ""
"Create a geometry surrounding the Gerber object.\n"
"Square shape."

#: flatcamGUI/ObjectUI.py:486
msgid "Generate the Geometry object."
msgstr "Generate the Geometry object."

#: flatcamGUI/ObjectUI.py:497
msgid "Excellon Object"
msgstr "Excellon Object"

#: flatcamGUI/ObjectUI.py:508
msgid "Solid circles."
msgstr "Solid circles."

#: flatcamGUI/ObjectUI.py:536 flatcamGUI/ObjectUI.py:858
msgid "<b>Tools Table</b>"
msgstr "<b>Tools Table</b>"

#: flatcamGUI/ObjectUI.py:556
msgid "Drills"
msgstr "Drills"

#: flatcamGUI/ObjectUI.py:556
msgid "Slots"
msgstr "Slots"

#: flatcamGUI/ObjectUI.py:557
msgid "Offset Z"
msgstr "Offset Z"

#: flatcamGUI/ObjectUI.py:561
msgid ""
"This is the Tool Number.\n"
"When ToolChange is checked, on toolchange event this value\n"
"will be showed as a T1, T2 ... Tn in the Machine Code."
msgstr ""
"This is the Tool Number.\n"
"When ToolChange is checked, on toolchange event this value\n"
"will be showed as a T1, T2 ... Tn in the Machine Code."

#: flatcamGUI/ObjectUI.py:565 flatcamGUI/ObjectUI.py:904
#: flatcamTools/ToolNonCopperClear.py:97 flatcamTools/ToolPaint.py:94
msgid ""
"Tool Diameter. It's value (in current FlatCAM units) \n"
"is the cut width into the material."
msgstr ""
"Tool Diameter. It's value (in current FlatCAM units) \n"
"is the cut width into the material."

#: flatcamGUI/ObjectUI.py:568
msgid ""
"The number of Drill holes. Holes that are drilled with\n"
"a drill bit."
msgstr ""
"The number of Drill holes. Holes that are drilled with\n"
"a drill bit."

#: flatcamGUI/ObjectUI.py:571
msgid ""
"The number of Slot holes. Holes that are created by\n"
"milling them with an endmill bit."
msgstr ""
"The number of Slot holes. Holes that are created by\n"
"milling them with an endmill bit."

#: flatcamGUI/ObjectUI.py:578
msgid "Toggle display of the drills for the current tool."
msgstr "Toggle display of the drills for the current tool."

#: flatcamGUI/ObjectUI.py:586
msgid ""
"Create a CNC Job object\n"
"for this drill object."
msgstr ""
"Create a CNC Job object\n"
"for this drill object."

#: flatcamGUI/ObjectUI.py:615 flatcamGUI/ObjectUI.py:1118
msgid "Tool change"
msgstr "Tool change"

#: flatcamGUI/ObjectUI.py:623 flatcamGUI/ObjectUI.py:1111
msgid "Tool change Z:"
msgstr "Tool change Z:"

#: flatcamGUI/ObjectUI.py:625 flatcamGUI/ObjectUI.py:1114
msgid ""
"Z-axis position (height) for\n"
"tool change."
msgstr ""
"Z-axis position (height) for\n"
"tool change."

#: flatcamGUI/ObjectUI.py:636
msgid ""
"Tool height just before starting the work.\n"
"Delete the value if you don't need this feature."
msgstr ""
"Tool height just before starting the work.\n"
"Delete the value if you don't need this feature."

#: flatcamGUI/ObjectUI.py:646
msgid ""
"Z-axis position (height) for\n"
"the last move."
msgstr ""
"Z-axis position (height) for\n"
"the last move."

#: flatcamGUI/ObjectUI.py:654
msgid "Feedrate (Plunge):"
msgstr "Feedrate (Plunge):"

#: flatcamGUI/ObjectUI.py:656
msgid ""
"Tool speed while drilling\n"
"(in units per minute).\n"
"This is for linear move G01."
msgstr ""
"Tool speed while drilling\n"
"(in units per minute).\n"
"This is for linear move G01."

#: flatcamGUI/ObjectUI.py:709
msgid ""
"The json file that dictates\n"
"gcode output."
msgstr ""
"The json file that dictates\n"
"gcode output."

#: flatcamGUI/ObjectUI.py:741
msgid ""
"Select from the Tools Table above\n"
"the tools you want to include."
msgstr ""
"Select from the Tools Table above\n"
"the tools you want to include."

#: flatcamGUI/ObjectUI.py:748
msgid "<b>Type:    </b>"
msgstr "<b>Type:    </b>"

#: flatcamGUI/ObjectUI.py:750
msgid ""
"Choose what to use for GCode generation:\n"
"'Drills', 'Slots' or 'Both'.\n"
"When choosing 'Slots' or 'Both', slots will be\n"
"converted to a series of drills."
msgstr ""
"Choose what to use for GCode generation:\n"
"'Drills', 'Slots' or 'Both'.\n"
"When choosing 'Slots' or 'Both', slots will be\n"
"converted to a series of drills."

#: flatcamGUI/ObjectUI.py:765
msgid "Create GCode"
msgstr "Create GCode"

#: flatcamGUI/ObjectUI.py:767
msgid "Generate the CNC Job."
msgstr "Generate the CNC Job."

#: flatcamGUI/ObjectUI.py:779
msgid ""
"Select from the Tools Table above\n"
" the hole dias that are to be milled."
msgstr ""
"Select from the Tools Table above\n"
" the hole dias that are to be milled."

#: flatcamGUI/ObjectUI.py:786
msgid "Drills Tool dia:"
msgstr "Drills Tool dia:"

#: flatcamGUI/ObjectUI.py:793
msgid "Mill Drills Geo"
msgstr "Mill Drills Geo"

#: flatcamGUI/ObjectUI.py:795
msgid ""
"Create the Geometry Object\n"
"for milling DRILLS toolpaths."
msgstr ""
"Create the Geometry Object\n"
"for milling DRILLS toolpaths."

#: flatcamGUI/ObjectUI.py:802
msgid "Slots Tool dia:"
msgstr "Slots Tool dia:"

#: flatcamGUI/ObjectUI.py:809
msgid "Mill Slots Geo"
msgstr "Mill Slots Geo"

#: flatcamGUI/ObjectUI.py:811
msgid ""
"Create the Geometry Object\n"
"for milling SLOTS toolpaths."
msgstr ""
"Create the Geometry Object\n"
"for milling SLOTS toolpaths."

#: flatcamGUI/ObjectUI.py:829
msgid "Geometry Object"
msgstr "Geometry Object"

#: flatcamGUI/ObjectUI.py:860
msgid ""
"Tools in this Geometry object used for cutting.\n"
"The 'Offset' entry will set an offset for the cut.\n"
"'Offset' can be inside, outside, on path (none) and custom.\n"
"'Type' entry is only informative and it allow to know the \n"
"intent of using the current tool. \n"
"It can be Rough(ing), Finish(ing) or Iso(lation).\n"
"The 'Tool type'(TT) can be circular with 1 to 4 teeths(C1..C4),\n"
"ball(B), or V-Shaped(V). \n"
"When V-shaped is selected the 'Type' entry is automatically \n"
"set to Isolation, the CutZ parameter in the UI form is\n"
"grayed out and Cut Z is automatically calculated from the newly \n"
"showed UI form entries named V-Tip Dia and V-Tip Angle."
msgstr ""
"Tools in this Geometry object used for cutting.\n"
"The 'Offset' entry will set an offset for the cut.\n"
"'Offset' can be inside, outside, on path (none) and custom.\n"
"'Type' entry is only informative and it allow to know the \n"
"intent of using the current tool. \n"
"It can be Rough(ing), Finish(ing) or Iso(lation).\n"
"The 'Tool type'(TT) can be circular with 1 to 4 teeths(C1..C4),\n"
"ball(B), or V-Shaped(V). \n"
"When V-shaped is selected the 'Type' entry is automatically \n"
"set to Isolation, the CutZ parameter in the UI form is\n"
"grayed out and Cut Z is automatically calculated from the newly \n"
"showed UI form entries named V-Tip Dia and V-Tip Angle."

#: flatcamGUI/ObjectUI.py:891 flatcamGUI/ObjectUI.py:1465
msgid "Dia"
msgstr "Dia"

#: flatcamGUI/ObjectUI.py:891 flatcamGUI/ObjectUI.py:1465
msgid "TT"
msgstr "TT"

#: flatcamGUI/ObjectUI.py:898
msgid ""
"This is the Tool Number.\n"
"When ToolChange is checked, on toolchange event this value\n"
"will be showed as a T1, T2 ... Tn"
msgstr ""
"This is the Tool Number.\n"
"When ToolChange is checked, on toolchange event this value\n"
"will be showed as a T1, T2 ... Tn"

#: flatcamGUI/ObjectUI.py:909
msgid ""
"The value for the Offset can be:\n"
"- Path -> There is no offset, the tool cut will be done through the geometry "
"line.\n"
"- In(side) -> The tool cut will follow the geometry inside. It will create a "
"'pocket'.\n"
"- Out(side) -> The tool cut will follow the geometry line on the outside."
msgstr ""
"The value for the Offset can be:\n"
"- Path -> There is no offset, the tool cut will be done through the geometry "
"line.\n"
"- In(side) -> The tool cut will follow the geometry inside. It will create a "
"'pocket'.\n"
"- Out(side) -> The tool cut will follow the geometry line on the outside."

#: flatcamGUI/ObjectUI.py:916
msgid ""
"The (Operation) Type has only informative value. Usually the UI form "
"values \n"
"are choosed based on the operation type and this will serve as a reminder.\n"
"Can be 'Roughing', 'Finishing' or 'Isolation'.\n"
"For Roughing we may choose a lower Feedrate and multiDepth cut.\n"
"For Finishing we may choose a higher Feedrate, without multiDepth.\n"
"For Isolation we need a lower Feedrate as it use a milling bit with a fine "
"tip."
msgstr ""
"The (Operation) Type has only informative value. Usually the UI form "
"values \n"
"are choosed based on the operation type and this will serve as a reminder.\n"
"Can be 'Roughing', 'Finishing' or 'Isolation'.\n"
"For Roughing we may choose a lower Feedrate and multiDepth cut.\n"
"For Finishing we may choose a higher Feedrate, without multiDepth.\n"
"For Isolation we need a lower Feedrate as it use a milling bit with a fine "
"tip."

#: flatcamGUI/ObjectUI.py:925
msgid ""
"The Tool Type (TT) can be:\n"
"- Circular with 1 ... 4 teeth -> it is informative only. Being circular the "
"cut width in material\n"
"is exactly the tool diameter.\n"
"- Ball -> informative only and make reference to the Ball type endmill.\n"
"- V-Shape -> it will disable de Z-Cut parameter in the UI form and enable "
"two additional UI form\n"
"fields: V-Tip Dia and V-Tip Angle. Adjusting those two values will adjust "
"the Z-Cut parameter such\n"
"as the cut width into material will be equal with the value in the Tool "
"Diameter column of this table.\n"
"Choosing the V-Shape Tool Type automatically will select the Operation Type "
"as Isolation."
msgstr ""
"The Tool Type (TT) can be:\n"
"- Circular with 1 ... 4 teeth -> it is informative only. Being circular the "
"cut width in material\n"
"is exactly the tool diameter.\n"
"- Ball -> informative only and make reference to the Ball type endmill.\n"
"- V-Shape -> it will disable de Z-Cut parameter in the UI form and enable "
"two additional UI form\n"
"fields: V-Tip Dia and V-Tip Angle. Adjusting those two values will adjust "
"the Z-Cut parameter such\n"
"as the cut width into material will be equal with the value in the Tool "
"Diameter column of this table.\n"
"Choosing the V-Shape Tool Type automatically will select the Operation Type "
"as Isolation."

#: flatcamGUI/ObjectUI.py:936
msgid ""
"Plot column. It is visible only for MultiGeo geometries, meaning geometries "
"that holds the geometry\n"
"data into the tools. For those geometries, deleting the tool will delete the "
"geometry data also,\n"
"so be WARNED. From the checkboxes on each row it can be enabled/disabled the "
"plot on canvas\n"
"for the corresponding tool."
msgstr ""
"Plot column. It is visible only for MultiGeo geometries, meaning geometries "
"that holds the geometry\n"
"data into the tools. For those geometries, deleting the tool will delete the "
"geometry data also,\n"
"so be WARNED. From the checkboxes on each row it can be enabled/disabled the "
"plot on canvas\n"
"for the corresponding tool."

#: flatcamGUI/ObjectUI.py:949
msgid "Tool Offset:"
msgstr "Tool Offset:"

#: flatcamGUI/ObjectUI.py:952
msgid ""
"The value to offset the cut when \n"
"the Offset type selected is 'Offset'.\n"
"The value can be positive for 'outside'\n"
"cut and negative for 'inside' cut."
msgstr ""
"The value to offset the cut when \n"
"the Offset type selected is 'Offset'.\n"
"The value can be positive for 'outside'\n"
"cut and negative for 'inside' cut."

#: flatcamGUI/ObjectUI.py:975
msgid "<b>Tool Dia:</b>"
msgstr "<b>Tool Dia:</b>"

#: flatcamGUI/ObjectUI.py:994 flatcamTools/ToolNonCopperClear.py:136
#: flatcamTools/ToolPaint.py:133
msgid ""
"Add a new tool to the Tool Table\n"
"with the diameter specified above."
msgstr ""
"Add a new tool to the Tool Table\n"
"with the diameter specified above."

#: flatcamGUI/ObjectUI.py:1002
msgid ""
"Copy a selection of tools in the Tool Table\n"
"by first selecting a row in the Tool Table."
msgstr ""
"Copy a selection of tools in the Tool Table\n"
"by first selecting a row in the Tool Table."

#: flatcamGUI/ObjectUI.py:1010
msgid ""
"Delete a selection of tools in the Tool Table\n"
"by first selecting a row in the Tool Table."
msgstr ""
"Delete a selection of tools in the Tool Table\n"
"by first selecting a row in the Tool Table."

#: flatcamGUI/ObjectUI.py:1026
msgid "<b>Tool Data</b>"
msgstr "<b>Tool Data</b>"

#: flatcamGUI/ObjectUI.py:1029
msgid ""
"The data used for creating GCode.\n"
"Each tool store it's own set of such data."
msgstr ""
"The data used for creating GCode.\n"
"Each tool store it's own set of such data."

#: flatcamGUI/ObjectUI.py:1039
msgid "V-Tip Dia:"
msgstr "V-Tip Dia:"

#: flatcamGUI/ObjectUI.py:1042
msgid "The tip diameter for V-Shape Tool"
msgstr "The tip diameter for V-Shape Tool"

#: flatcamGUI/ObjectUI.py:1050
msgid "V-Tip Angle:"
msgstr "V-Tip Angle:"

#: flatcamGUI/ObjectUI.py:1053
msgid ""
"The tip angle for V-Shape Tool.\n"
"In degree."
msgstr ""
"The tip angle for V-Shape Tool.\n"
"In degree."

#: flatcamGUI/ObjectUI.py:1074
msgid "Multi-Depth:"
msgstr "Multi-Depth:"

#: flatcamGUI/ObjectUI.py:1077
msgid ""
"Use multiple passes to limit\n"
"the cut depth in each pass. Will\n"
"cut multiple times until Cut Z is\n"
"reached.\n"
"To the right, input the depth of \n"
"each pass (positive value)."
msgstr ""
"Use multiple passes to limit\n"
"the cut depth in each pass. Will\n"
"cut multiple times until Cut Z is\n"
"reached.\n"
"To the right, input the depth of \n"
"each pass (positive value)."

#: flatcamGUI/ObjectUI.py:1090
msgid "Depth of each pass (positive)."
msgstr "Depth of each pass (positive)."

#: flatcamGUI/ObjectUI.py:1121
msgid ""
"Include tool-change sequence\n"
"in the Machine Code (Pause for tool change)."
msgstr ""
"Include tool-change sequence\n"
"in the Machine Code (Pause for tool change)."

#: flatcamGUI/ObjectUI.py:1147
msgid ""
"This is the height (Z) at which the CNC\n"
"will go as the last move."
msgstr ""
"This is the height (Z) at which the CNC\n"
"will go as the last move."

#: flatcamGUI/ObjectUI.py:1168
msgid "Feed Rate Z (Plunge):"
msgstr "Feed Rate Z (Plunge):"

#: flatcamGUI/ObjectUI.py:1171
msgid ""
"Cutting speed in the Z\n"
"plane in units per minute"
msgstr ""
"Cutting speed in the Z\n"
"plane in units per minute"

#: flatcamGUI/ObjectUI.py:1180
msgid "Feed Rate Rapids:"
msgstr "Feed Rate Rapids:"

#: flatcamGUI/ObjectUI.py:1183
msgid ""
"Cutting speed in the XY\n"
"plane in units per minute\n"
"(in units per minute).\n"
"This is for the rapid move G00.\n"
"It is useful only for Marlin,\n"
"ignore for any other cases."
msgstr ""
"Cutting speed in the XY\n"
"plane in units per minute\n"
"(in units per minute).\n"
"This is for the rapid move G00.\n"
"It is useful only for Marlin,\n"
"ignore for any other cases."

#: flatcamGUI/ObjectUI.py:1199
msgid "Cut over 1st pt"
msgstr "Cut over 1st pt"

#: flatcamGUI/ObjectUI.py:1214
msgid ""
"Speed of the spindle in RPM (optional).\n"
"If LASER postprocessor is used,\n"
"this value is the power of laser."
msgstr ""
"Speed of the spindle in RPM (optional).\n"
"If LASER postprocessor is used,\n"
"this value is the power of laser."

#: flatcamGUI/ObjectUI.py:1243
msgid "PostProcessor:"
msgstr "PostProcessor:"

#: flatcamGUI/ObjectUI.py:1246
msgid ""
"The Postprocessor file that dictates\n"
"the Machine Code (like GCode, RML, HPGL) output."
msgstr ""
"The Postprocessor file that dictates\n"
"the Machine Code (like GCode, RML, HPGL) output."

#: flatcamGUI/ObjectUI.py:1284
msgid ""
"Add at least one tool in the tool-table.\n"
"Click the header to select all, or Ctrl + LMB\n"
"for custom selection of tools."
msgstr ""
"Add at least one tool in the tool-table.\n"
"Click the header to select all, or Ctrl + LMB\n"
"for custom selection of tools."

#: flatcamGUI/ObjectUI.py:1291
msgid "Generate"
msgstr "Generate"

#: flatcamGUI/ObjectUI.py:1294
msgid "Generate the CNC Job object."
msgstr "Generate the CNC Job object."

#: flatcamGUI/ObjectUI.py:1302
msgid "<b>Paint Area:</b>"
msgstr "<b>Paint Area:</b>"

#: flatcamGUI/ObjectUI.py:1317
msgid "Launch Paint Tool in Tools Tab."
msgstr "Launch Paint Tool in Tools Tab."

#: flatcamGUI/ObjectUI.py:1334
msgid "CNC Job Object"
msgstr "CNC Job Object"

#: flatcamGUI/ObjectUI.py:1353
msgid "<b>Plot kind:</b>"
msgstr "<b>Plot kind:</b>"

#: flatcamGUI/ObjectUI.py:1369
msgid "<b>Display Annotation:</b>"
msgstr "<b>Display Annotation:</b>"

#: flatcamGUI/ObjectUI.py:1388
msgid "<b>Travelled dist.:</b>"
msgstr "<b>Travelled dist.:</b>"

#: flatcamGUI/ObjectUI.py:1391 flatcamGUI/ObjectUI.py:1398
msgid ""
"This is the total travelled distance on X-Y plane.\n"
"In current units."
msgstr ""
"This is the total travelled distance on X-Y plane.\n"
"In current units."

#: flatcamGUI/ObjectUI.py:1429
msgid "<b>CNC Tools Table</b>"
msgstr "<b>CNC Tools Table</b>"

#: flatcamGUI/ObjectUI.py:1432
msgid ""
"Tools in this CNCJob object used for cutting.\n"
"The tool diameter is used for plotting on canvas.\n"
"The 'Offset' entry will set an offset for the cut.\n"
"'Offset' can be inside, outside, on path (none) and custom.\n"
"'Type' entry is only informative and it allow to know the \n"
"intent of using the current tool. \n"
"It can be Rough(ing), Finish(ing) or Iso(lation).\n"
"The 'Tool type'(TT) can be circular with 1 to 4 teeths(C1..C4),\n"
"ball(B), or V-Shaped(V)."
msgstr ""
"Tools in this CNCJob object used for cutting.\n"
"The tool diameter is used for plotting on canvas.\n"
"The 'Offset' entry will set an offset for the cut.\n"
"'Offset' can be inside, outside, on path (none) and custom.\n"
"'Type' entry is only informative and it allow to know the \n"
"intent of using the current tool. \n"
"It can be Rough(ing), Finish(ing) or Iso(lation).\n"
"The 'Tool type'(TT) can be circular with 1 to 4 teeths(C1..C4),\n"
"ball(B), or V-Shaped(V)."

#: flatcamGUI/ObjectUI.py:1466
msgid "P"
msgstr "P"

#: flatcamGUI/ObjectUI.py:1472
msgid "Update Plot"
msgstr "Update Plot"

#: flatcamGUI/ObjectUI.py:1474
msgid "Update the plot."
msgstr "Update the plot."

#: flatcamGUI/ObjectUI.py:1481
msgid "<b>Export CNC Code:</b>"
msgstr "<b>Export CNC Code:</b>"

#: flatcamGUI/ObjectUI.py:1489
msgid "Prepend to CNC Code:"
msgstr "Prepend to CNC Code:"

#: flatcamGUI/ObjectUI.py:1492
msgid ""
"Type here any G-Code commands you would\n"
"like to add to the beginning of the generated file."
msgstr ""
"Type here any G-Code commands you would\n"
"like to add to the beginning of the generated file."

#: flatcamGUI/ObjectUI.py:1502
msgid "Append to CNC Code:"
msgstr "Append to CNC Code:"

#: flatcamGUI/ObjectUI.py:1526
msgid ""
"Type here any G-Code commands you would\n"
"like to be executed when Toolchange event is encountered.\n"
"This will constitute a Custom Toolchange GCode,\n"
"or a Toolchange Macro.\n"
"The FlatCAM variables are surrounded by '%' symbol.\n"
"\n"
"WARNING: it can be used only with a postprocessor file\n"
"that has 'toolchange_custom' in it's name and this is built\n"
"having as template the 'Toolchange Custom' posprocessor file."
msgstr ""
"Type here any G-Code commands you would\n"
"like to be executed when Toolchange event is encountered.\n"
"This will constitute a Custom Toolchange GCode,\n"
"or a Toolchange Macro.\n"
"The FlatCAM variables are surrounded by '%' symbol.\n"
"\n"
"WARNING: it can be used only with a postprocessor file\n"
"that has 'toolchange_custom' in it's name and this is built\n"
"having as template the 'Toolchange Custom' posprocessor file."

#: flatcamGUI/ObjectUI.py:1574
msgid "z_cut = depth where to cut"
msgstr "z_cut = depth where to cut"

#: flatcamGUI/ObjectUI.py:1575
msgid "z_move = height where to travel"
msgstr "z_move = height where to travel"

#: flatcamGUI/ObjectUI.py:1593
msgid "View CNC Code"
msgstr "View CNC Code"

#: flatcamGUI/ObjectUI.py:1596
msgid ""
"Opens TAB to view/modify/print G-Code\n"
"file."
msgstr ""
"Opens TAB to view/modify/print G-Code\n"
"file."

#: flatcamGUI/ObjectUI.py:1602
msgid "Save CNC Code"
msgstr "Save CNC Code"

#: flatcamGUI/ObjectUI.py:1605
msgid ""
"Opens dialog to save G-Code\n"
"file."
msgstr ""
"Opens dialog to save G-Code\n"
"file."

#: flatcamTools/ToolCalculators.py:24
msgid "Calculators"
msgstr "Calculators"

#: flatcamTools/ToolCalculators.py:25
msgid "V-Shape Tool Calculator"
msgstr "V-Shape Tool Calculator"

#: flatcamTools/ToolCalculators.py:26
msgid "Units Calculator"
msgstr "Units Calculator"

#: flatcamTools/ToolCalculators.py:27
msgid "ElectroPlating Calculator"
msgstr "ElectroPlating Calculator"

#: flatcamTools/ToolCalculators.py:68
msgid "Here you enter the value to be converted from INCH to MM"
msgstr "Here you enter the value to be converted from INCH to MM"

#: flatcamTools/ToolCalculators.py:73
msgid "Here you enter the value to be converted from MM to INCH"
msgstr "Here you enter the value to be converted from MM to INCH"

#: flatcamTools/ToolCalculators.py:98
msgid ""
"This is the diameter of the tool tip.\n"
"The manufacturer specifies it."
msgstr ""
"This is the diameter of the tool tip.\n"
"The manufacturer specifies it."

#: flatcamTools/ToolCalculators.py:101
msgid "Tip Angle:"
msgstr "Tip Angle:"

#: flatcamTools/ToolCalculators.py:105
msgid ""
"This is the angle of the tip of the tool.\n"
"It is specified by manufacturer."
msgstr ""
"This is the angle of the tip of the tool.\n"
"It is specified by manufacturer."

#: flatcamTools/ToolCalculators.py:112
msgid ""
"This is the depth to cut into the material.\n"
"In the CNCJob is the CutZ parameter."
msgstr ""
"This is the depth to cut into the material.\n"
"In the CNCJob is the CutZ parameter."

#: flatcamTools/ToolCalculators.py:115
msgid "Tool Diameter:"
msgstr "Tool Diameter:"

#: flatcamTools/ToolCalculators.py:119
msgid ""
"This is the tool diameter to be entered into\n"
"FlatCAM Gerber section.\n"
"In the CNCJob section it is called >Tool dia<."
msgstr ""
"This is the tool diameter to be entered into\n"
"FlatCAM Gerber section.\n"
"In the CNCJob section it is called >Tool dia<."

#: flatcamTools/ToolCalculators.py:131 flatcamTools/ToolCalculators.py:214
msgid "Calculate"
msgstr "Calculate"

#: flatcamTools/ToolCalculators.py:134
msgid ""
"Calculate either the Cut Z or the effective tool diameter,\n"
"  depending on which is desired and which is known. "
msgstr ""
"Calculate either the Cut Z or the effective tool diameter,\n"
"  depending on which is desired and which is known. "

#: flatcamTools/ToolCalculators.py:190
msgid "Current Value:"
msgstr "Current Value:"

#: flatcamTools/ToolCalculators.py:194
msgid ""
"This is the current intensity value\n"
"to be set on the Power Supply. In Amps."
msgstr ""
"This is the current intensity value\n"
"to be set on the Power Supply. In Amps."

#: flatcamTools/ToolCalculators.py:198
msgid "Time:"
msgstr "Time:"

#: flatcamTools/ToolCalculators.py:202
msgid ""
"This is the calculated time required for the procedure.\n"
"In minutes."
msgstr ""
"This is the calculated time required for the procedure.\n"
"In minutes."

#: flatcamTools/ToolCalculators.py:217
msgid ""
"Calculate the current intensity value and the procedure time,\n"
"  depending on the parameters above"
msgstr ""
"Calculate the current intensity value and the procedure time,\n"
"  depending on the parameters above"

#: flatcamTools/ToolCutOut.py:17
msgid "Cutout PCB"
msgstr "Cutout PCB"

#: flatcamTools/ToolCutOut.py:53
msgid "Obj Type:"
msgstr "Obj Type:"

#: flatcamTools/ToolCutOut.py:55
msgid ""
"Specify the type of object to be cutout.\n"
"It can be of type: Gerber or Geometry.\n"
"What is selected here will dictate the kind\n"
"of objects that will populate the 'Object' combobox."
msgstr ""
"Specify the type of object to be cutout.\n"
"It can be of type: Gerber or Geometry.\n"
"What is selected here will dictate the kind\n"
"of objects that will populate the 'Object' combobox."

#: flatcamTools/ToolCutOut.py:69 flatcamTools/ToolPanelize.py:71
msgid "Object:"
msgstr "Object:"

#: flatcamTools/ToolCutOut.py:71
msgid "Object to be cutout.                        "
msgstr "Object to be cutout.                        "

#: flatcamTools/ToolCutOut.py:79
msgid ""
"Diameter of the tool used to cutout\n"
"the PCB shape out of the surrounding material."
msgstr ""
"Diameter of the tool used to cutout\n"
"the PCB shape out of the surrounding material."

#: flatcamTools/ToolCutOut.py:88
msgid ""
"Margin over bounds. A positive value here\n"
"will make the cutout of the PCB further from\n"
"the actual PCB border"
msgstr ""
"Margin over bounds. A positive value here\n"
"will make the cutout of the PCB further from\n"
"the actual PCB border"

#: flatcamTools/ToolCutOut.py:98
msgid ""
"The size of the bridge gaps in the cutout\n"
"used to keep the board connected to\n"
"the surrounding material (the one \n"
"from which the PCB is cutout)."
msgstr ""
"The size of the bridge gaps in the cutout\n"
"used to keep the board connected to\n"
"the surrounding material (the one \n"
"from which the PCB is cutout)."

#: flatcamTools/ToolCutOut.py:117
msgid ""
"Create a convex shape surrounding the entire PCB.\n"
"Used only if the source object type is Gerber."
msgstr ""
"Create a convex shape surrounding the entire PCB.\n"
"Used only if the source object type is Gerber."

#: flatcamTools/ToolCutOut.py:123
msgid "A. Automatic Bridge Gaps"
msgstr "A. Automatic Bridge Gaps"

#: flatcamTools/ToolCutOut.py:125
msgid "This section handle creation of automatic bridge gaps."
msgstr "This section handle creation of automatic bridge gaps."

#: flatcamTools/ToolCutOut.py:136
msgid ""
"Number of gaps used for the Automatic cutout.\n"
"There can be maximum 8 bridges/gaps.\n"
"The choices are:\n"
"- lr    - left + right\n"
"- tb    - top + bottom\n"
"- 4     - left + right +top + bottom\n"
"- 2lr   - 2*left + 2*right\n"
"- 2tb  - 2*top + 2*bottom\n"
"- 8     - 2*left + 2*right +2*top + 2*bottom"
msgstr ""
"Number of gaps used for the Automatic cutout.\n"
"There can be maximum 8 bridges/gaps.\n"
"The choices are:\n"
"- lr    - left + right\n"
"- tb    - top + bottom\n"
"- 4     - left + right +top + bottom\n"
"- 2lr   - 2*left + 2*right\n"
"- 2tb  - 2*top + 2*bottom\n"
"- 8     - 2*left + 2*right +2*top + 2*bottom"

#: flatcamTools/ToolCutOut.py:159
msgid "FreeForm:"
msgstr "FreeForm:"

#: flatcamTools/ToolCutOut.py:161
msgid ""
"The cutout shape can be of ny shape.\n"
"Useful when the PCB has a non-rectangular shape."
msgstr ""
"The cutout shape can be of ny shape.\n"
"Useful when the PCB has a non-rectangular shape."

#: flatcamTools/ToolCutOut.py:170
msgid ""
"Cutout the selected object.\n"
"The cutout shape can be of any shape.\n"
"Useful when the PCB has a non-rectangular shape."
msgstr ""
"Cutout the selected object.\n"
"The cutout shape can be of any shape.\n"
"Useful when the PCB has a non-rectangular shape."

#: flatcamTools/ToolCutOut.py:179
msgid "Rectangular:"
msgstr "Rectangular:"

#: flatcamTools/ToolCutOut.py:181
msgid ""
"The resulting cutout shape is\n"
"always a rectangle shape and it will be\n"
"the bounding box of the Object."
msgstr ""
"The resulting cutout shape is\n"
"always a rectangle shape and it will be\n"
"the bounding box of the Object."

#: flatcamTools/ToolCutOut.py:190
msgid ""
"Cutout the selected object.\n"
"The resulting cutout shape is\n"
"always a rectangle shape and it will be\n"
"the bounding box of the Object."
msgstr ""
"Cutout the selected object.\n"
"The resulting cutout shape is\n"
"always a rectangle shape and it will be\n"
"the bounding box of the Object."

#: flatcamTools/ToolCutOut.py:198
msgid "B. Manual Bridge Gaps"
msgstr "B. Manual Bridge Gaps"

#: flatcamTools/ToolCutOut.py:200
msgid ""
"This section handle creation of manual bridge gaps.\n"
"This is done by mouse clicking on the perimeter of the\n"
"Geometry object that is used as a cutout object. "
msgstr ""
"This section handle creation of manual bridge gaps.\n"
"This is done by mouse clicking on the perimeter of the\n"
"Geometry object that is used as a cutout object. "

#: flatcamTools/ToolCutOut.py:216
msgid "Geo Obj:"
msgstr "Geo Obj:"

#: flatcamTools/ToolCutOut.py:218
msgid "Geometry object used to create the manual cutout."
msgstr "Geometry object used to create the manual cutout."

#: flatcamTools/ToolCutOut.py:229
msgid "Manual Geo:"
msgstr "Manual Geo:"

#: flatcamTools/ToolCutOut.py:231 flatcamTools/ToolCutOut.py:241
msgid ""
"If the object to be cutout is a Gerber\n"
"first create a Geometry that surrounds it,\n"
"to be used as the cutout, if one doesn't exist yet.\n"
"Select the source Gerber file in the top object combobox."
msgstr ""
"If the object to be cutout is a Gerber\n"
"first create a Geometry that surrounds it,\n"
"to be used as the cutout, if one doesn't exist yet.\n"
"Select the source Gerber file in the top object combobox."

#: flatcamTools/ToolCutOut.py:251
msgid "Manual Add Bridge Gaps:"
msgstr "Manual Add Bridge Gaps:"

#: flatcamTools/ToolCutOut.py:253
msgid ""
"Use the left mouse button (LMB) click\n"
"to create a bridge gap to separate the PCB from\n"
"the surrounding material."
msgstr ""
"Use the left mouse button (LMB) click\n"
"to create a bridge gap to separate the PCB from\n"
"the surrounding material."

#: flatcamTools/ToolCutOut.py:260
msgid "Generate Gap"
msgstr "Generate Gap"

#: flatcamTools/ToolCutOut.py:262
msgid ""
"Use the left mouse button (LMB) click\n"
"to create a bridge gap to separate the PCB from\n"
"the surrounding material.\n"
"The LMB click has to be done on the perimeter of\n"
"the Geometry object used as a cutout geometry."
msgstr ""
"Use the left mouse button (LMB) click\n"
"to create a bridge gap to separate the PCB from\n"
"the surrounding material.\n"
"The LMB click has to be done on the perimeter of\n"
"the Geometry object used as a cutout geometry."

#: flatcamTools/ToolCutOut.py:341 flatcamTools/ToolCutOut.py:505
#: flatcamTools/ToolNonCopperClear.py:666 flatcamTools/ToolPaint.py:764
#: flatcamTools/ToolPanelize.py:352 flatcamTools/ToolPanelize.py:366
#: flatcamTools/ToolSub.py:237 flatcamTools/ToolSub.py:249
#: flatcamTools/ToolSub.py:428 flatcamTools/ToolSub.py:440
#, python-format
msgid "[ERROR_NOTCL] Could not retrieve object: %s"
msgstr "[ERROR_NOTCL] Could not retrieve object: %s"

#: flatcamTools/ToolCutOut.py:345
msgid ""
"[ERROR_NOTCL] There is no object selected for Cutout.\n"
"Select one and try again."
msgstr ""
"[ERROR_NOTCL] There is no object selected for Cutout.\n"
"Select one and try again."

#: flatcamTools/ToolCutOut.py:360
msgid ""
"[WARNING_NOTCL] Tool Diameter is zero value. Change it to a positive real "
"number."
msgstr ""
"[WARNING_NOTCL] Tool Diameter is zero value. Change it to a positive real "
"number."

#: flatcamTools/ToolCutOut.py:370 flatcamTools/ToolCutOut.py:533
#: flatcamTools/ToolCutOut.py:777
msgid ""
"[WARNING_NOTCL] Margin value is missing or wrong format. Add it and retry."
msgstr ""
"[WARNING_NOTCL] Margin value is missing or wrong format. Add it and retry."

#: flatcamTools/ToolCutOut.py:381 flatcamTools/ToolCutOut.py:544
#: flatcamTools/ToolCutOut.py:672
msgid ""
"[WARNING_NOTCL] Gap size value is missing or wrong format. Add it and retry."
msgstr ""
"[WARNING_NOTCL] Gap size value is missing or wrong format. Add it and retry."

#: flatcamTools/ToolCutOut.py:388 flatcamTools/ToolCutOut.py:551
msgid "[WARNING_NOTCL] Number of gaps value is missing. Add it and retry."
msgstr "[WARNING_NOTCL] Number of gaps value is missing. Add it and retry."

#: flatcamTools/ToolCutOut.py:392 flatcamTools/ToolCutOut.py:555
msgid ""
"[WARNING_NOTCL] Gaps value can be only one of: 'lr', 'tb', '2lr', '2tb', 4 "
"or 8. Fill in a correct value and retry. "
msgstr ""
"[WARNING_NOTCL] Gaps value can be only one of: 'lr', 'tb', '2lr', '2tb', 4 "
"or 8. Fill in a correct value and retry. "

#: flatcamTools/ToolCutOut.py:397 flatcamTools/ToolCutOut.py:560
msgid ""
"[ERROR]Cutout operation cannot be done on a multi-geo Geometry.\n"
"Optionally, this Multi-geo Geometry can be converted to Single-geo "
"Geometry,\n"
"and after that perform Cutout."
msgstr ""
"[ERROR]Cutout operation cannot be done on a multi-geo Geometry.\n"
"Optionally, this Multi-geo Geometry can be converted to Single-geo "
"Geometry,\n"
"and after that perform Cutout."

#: flatcamTools/ToolCutOut.py:489 flatcamTools/ToolCutOut.py:642
msgid "[success] Any form CutOut operation finished."
msgstr "[success] Any form CutOut operation finished."

#: flatcamTools/ToolCutOut.py:509 flatcamTools/ToolPaint.py:768
#: flatcamTools/ToolPanelize.py:358
#, python-format
msgid "[ERROR_NOTCL] Object not found: %s"
msgstr "[ERROR_NOTCL] Object not found: %s"

#: flatcamTools/ToolCutOut.py:523 flatcamTools/ToolCutOut.py:662
#: flatcamTools/ToolCutOut.py:767
msgid ""
"[ERROR_NOTCL] Tool Diameter is zero value. Change it to a positive real "
"number."
msgstr ""
"[ERROR_NOTCL] Tool Diameter is zero value. Change it to a positive real "
"number."

#: flatcamTools/ToolCutOut.py:647
msgid ""
"Click on the selected geometry object perimeter to create a bridge gap ..."
msgstr ""
"Click on the selected geometry object perimeter to create a bridge gap ..."

#: flatcamTools/ToolCutOut.py:688
msgid "Making manual bridge gap..."
msgstr "Making manual bridge gap..."

#: flatcamTools/ToolCutOut.py:711
#, python-format
msgid "[ERROR_NOTCL] Could not retrieve Geometry object: %s"
msgstr "[ERROR_NOTCL] Could not retrieve Geometry object: %s"

#: flatcamTools/ToolCutOut.py:715
#, python-format
msgid "[ERROR_NOTCL] Geometry object for manual cutout not found: %s"
msgstr "[ERROR_NOTCL] Geometry object for manual cutout not found: %s"

#: flatcamTools/ToolCutOut.py:725
msgid "[success] Added manual Bridge Gap."
msgstr "[success] Added manual Bridge Gap."

#: flatcamTools/ToolCutOut.py:742
#, python-format
msgid "[ERROR_NOTCL] Could not retrieve Gerber object: %s"
msgstr "[ERROR_NOTCL] Could not retrieve Gerber object: %s"

#: flatcamTools/ToolCutOut.py:746
msgid ""
"[ERROR_NOTCL] There is no Gerber object selected for Cutout.\n"
"Select one and try again."
msgstr ""
"[ERROR_NOTCL] There is no Gerber object selected for Cutout.\n"
"Select one and try again."

#: flatcamTools/ToolCutOut.py:751
msgid ""
"[ERROR_NOTCL] The selected object has to be of Gerber type.\n"
"Select a Gerber file and try again."
msgstr ""
"[ERROR_NOTCL] The selected object has to be of Gerber type.\n"
"Select a Gerber file and try again."

#: flatcamTools/ToolDblSided.py:18
msgid "2-Sided PCB"
msgstr "2-Sided PCB"

#: flatcamTools/ToolDblSided.py:52 flatcamTools/ToolDblSided.py:76
#: flatcamTools/ToolDblSided.py:100
msgid "Mirror"
msgstr "Mirror"

#: flatcamTools/ToolDblSided.py:54 flatcamTools/ToolDblSided.py:78
#: flatcamTools/ToolDblSided.py:102
msgid ""
"Mirrors (flips) the specified object around \n"
"the specified axis. Does not create a new \n"
"object, but modifies it."
msgstr ""
"Mirrors (flips) the specified object around \n"
"the specified axis. Does not create a new \n"
"object, but modifies it."

#: flatcamTools/ToolDblSided.py:73
msgid "Excellon Object to be mirrored."
msgstr "Excellon Object to be mirrored."

#: flatcamTools/ToolDblSided.py:97
msgid "Geometry Obj to be mirrored."
msgstr "Geometry Obj to be mirrored."

#: flatcamTools/ToolDblSided.py:135
msgid ""
"The axis should pass through a <b>point</b> or cut\n"
" a specified <b>box</b> (in a FlatCAM object) through \n"
"the center."
msgstr ""
"The axis should pass through a <b>point</b> or cut\n"
" a specified <b>box</b> (in a FlatCAM object) through \n"
"the center."

#: flatcamTools/ToolDblSided.py:152
msgid "Point/Box Reference:"
msgstr "Point/Box Reference:"

#: flatcamTools/ToolDblSided.py:154
msgid ""
"If 'Point' is selected above it store the coordinates (x, y) through which\n"
"the mirroring axis passes.\n"
"If 'Box' is selected above, select here a FlatCAM object (Gerber, Exc or "
"Geo).\n"
"Through the center of this object pass the mirroring axis selected above."
msgstr ""
"If 'Point' is selected above it store the coordinates (x, y) through which\n"
"the mirroring axis passes.\n"
"If 'Box' is selected above, select here a FlatCAM object (Gerber, Exc or "
"Geo).\n"
"Through the center of this object pass the mirroring axis selected above."

#: flatcamTools/ToolDblSided.py:162
msgid ""
"Add the coordinates in format <b>(x, y)</b> through which the mirroring "
"axis \n"
" selected in 'MIRROR AXIS' pass.\n"
"The (x, y) coordinates are captured by pressing SHIFT key\n"
"and left mouse button click on canvas or you can enter the coords manually."
msgstr ""
"Add the coordinates in format <b>(x, y)</b> through which the mirroring "
"axis \n"
" selected in 'MIRROR AXIS' pass.\n"
"The (x, y) coordinates are captured by pressing SHIFT key\n"
"and left mouse button click on canvas or you can enter the coords manually."

#: flatcamTools/ToolDblSided.py:182
msgid "Gerber   Reference Box Object"
msgstr "Gerber   Reference Box Object"

#: flatcamTools/ToolDblSided.py:183
msgid "Excellon Reference Box Object"
msgstr "Excellon Reference Box Object"

#: flatcamTools/ToolDblSided.py:184
msgid "Geometry Reference Box Object"
msgstr "Geometry Reference Box Object"

#: flatcamTools/ToolDblSided.py:193
msgid "Alignment Drill Coordinates:"
msgstr "Alignment Drill Coordinates:"

#: flatcamTools/ToolDblSided.py:195
msgid ""
"Alignment holes (x1, y1), (x2, y2), ... on one side of the mirror axis. For "
"each set of (x, y) coordinates\n"
"entered here, a pair of drills will be created:\n"
"\n"
"- one drill at the coordinates from the field\n"
"- one drill in mirror position over the axis selected above in the 'Mirror "
"Axis'."
msgstr ""
"Alignment holes (x1, y1), (x2, y2), ... on one side of the mirror axis. For "
"each set of (x, y) coordinates\n"
"entered here, a pair of drills will be created:\n"
"\n"
"- one drill at the coordinates from the field\n"
"- one drill in mirror position over the axis selected above in the 'Mirror "
"Axis'."

#: flatcamTools/ToolDblSided.py:210
msgid ""
"Add alignment drill holes coords in the format: (x1, y1), (x2, y2), ... \n"
"on one side of the mirror axis.\n"
"\n"
"The coordinates set can be obtained:\n"
"- press SHIFT key and left mouse clicking on canvas. Then click Add.\n"
"- press SHIFT key and left mouse clicking on canvas. Then CTRL+V in the "
"field.\n"
"- press SHIFT key and left mouse clicking on canvas. Then RMB click in the "
"field and click Paste.\n"
"- by entering the coords manually in the format: (x1, y1), (x2, y2), ..."
msgstr ""
"Add alignment drill holes coords in the format: (x1, y1), (x2, y2), ... \n"
"on one side of the mirror axis.\n"
"\n"
"The coordinates set can be obtained:\n"
"- press SHIFT key and left mouse clicking on canvas. Then click Add.\n"
"- press SHIFT key and left mouse clicking on canvas. Then CTRL+V in the "
"field.\n"
"- press SHIFT key and left mouse clicking on canvas. Then RMB click in the "
"field and click Paste.\n"
"- by entering the coords manually in the format: (x1, y1), (x2, y2), ..."

#: flatcamTools/ToolDblSided.py:224
msgid "Alignment Drill Diameter"
msgstr "Alignment Drill Diameter"

#: flatcamTools/ToolDblSided.py:247
msgid "Create Excellon Object"
msgstr "Create Excellon Object"

#: flatcamTools/ToolDblSided.py:249
msgid ""
"Creates an Excellon Object containing the\n"
"specified alignment holes and their mirror\n"
"images."
msgstr ""
"Creates an Excellon Object containing the\n"
"specified alignment holes and their mirror\n"
"images."

#: flatcamTools/ToolDblSided.py:255
msgid "Reset"
msgstr "Reset"

#: flatcamTools/ToolDblSided.py:257
msgid "Resets all the fields."
msgstr "Resets all the fields."

#: flatcamTools/ToolDblSided.py:302
msgid "2-Sided Tool"
msgstr "2-Sided Tool"

#: flatcamTools/ToolDblSided.py:327
msgid ""
"[WARNING_NOTCL] 'Point' reference is selected and 'Point' coordinates are "
"missing. Add them and retry."
msgstr ""
"[WARNING_NOTCL] 'Point' reference is selected and 'Point' coordinates are "
"missing. Add them and retry."

#: flatcamTools/ToolDblSided.py:346
msgid ""
"[WARNING_NOTCL] There is no Box reference object loaded. Load one and retry."
msgstr ""
"[WARNING_NOTCL] There is no Box reference object loaded. Load one and retry."

#: flatcamTools/ToolDblSided.py:368
msgid ""
"[WARNING_NOTCL] No value or wrong format in Drill Dia entry. Add it and "
"retry."
msgstr ""
"[WARNING_NOTCL] No value or wrong format in Drill Dia entry. Add it and "
"retry."

#: flatcamTools/ToolDblSided.py:375
msgid ""
"[WARNING_NOTCL] There are no Alignment Drill Coordinates to use. Add them "
"and retry."
msgstr ""
"[WARNING_NOTCL] There are no Alignment Drill Coordinates to use. Add them "
"and retry."

#: flatcamTools/ToolDblSided.py:397
msgid "[success] Excellon object with alignment drills created..."
msgstr "[success] Excellon object with alignment drills created..."

#: flatcamTools/ToolDblSided.py:406
msgid "[WARNING_NOTCL] There is no Gerber object loaded ..."
msgstr "[WARNING_NOTCL] There is no Gerber object loaded ..."

#: flatcamTools/ToolDblSided.py:410 flatcamTools/ToolDblSided.py:453
#: flatcamTools/ToolDblSided.py:497
msgid ""
"[ERROR_NOTCL] Only Gerber, Excellon and Geometry objects can be mirrored."
msgstr ""
"[ERROR_NOTCL] Only Gerber, Excellon and Geometry objects can be mirrored."

#: flatcamTools/ToolDblSided.py:420
msgid ""
"[WARNING_NOTCL] 'Point' coordinates missing. Using Origin (0, 0) as "
"mirroring reference."
msgstr ""
"[WARNING_NOTCL] 'Point' coordinates missing. Using Origin (0, 0) as "
"mirroring reference."

#: flatcamTools/ToolDblSided.py:430 flatcamTools/ToolDblSided.py:474
#: flatcamTools/ToolDblSided.py:511
msgid "[WARNING_NOTCL] There is no Box object loaded ..."
msgstr "[WARNING_NOTCL] There is no Box object loaded ..."

#: flatcamTools/ToolDblSided.py:440
#, python-format
msgid "[success] Gerber %s was mirrored..."
msgstr "[success] Gerber %s was mirrored..."

#: flatcamTools/ToolDblSided.py:449
msgid "[WARNING_NOTCL] There is no Excellon object loaded ..."
msgstr "[WARNING_NOTCL] There is no Excellon object loaded ..."

#: flatcamTools/ToolDblSided.py:464
msgid ""
"[WARNING_NOTCL] There are no Point coordinates in the Point field. Add "
"coords and try again ..."
msgstr ""
"[WARNING_NOTCL] There are no Point coordinates in the Point field. Add "
"coords and try again ..."

#: flatcamTools/ToolDblSided.py:484
#, python-format
msgid "[success] Excellon %s was mirrored..."
msgstr "[success] Excellon %s was mirrored..."

#: flatcamTools/ToolDblSided.py:493
msgid "[WARNING_NOTCL] There is no Geometry object loaded ..."
msgstr "[WARNING_NOTCL] There is no Geometry object loaded ..."

#: flatcamTools/ToolDblSided.py:521
#, python-format
msgid "[success] Geometry %s was mirrored..."
msgstr "[success] Geometry %s was mirrored..."

#: flatcamTools/ToolFilm.py:25
msgid "Film PCB"
msgstr "Film PCB"

#: flatcamTools/ToolFilm.py:56 flatcamTools/ToolImage.py:53
#: flatcamTools/ToolPanelize.py:56
msgid "Object Type:"
msgstr "Object Type:"

#: flatcamTools/ToolFilm.py:58
msgid ""
"Specify the type of object for which to create the film.\n"
"The object can be of type: Gerber or Geometry.\n"
"The selection here decide the type of objects that will be\n"
"in the Film Object combobox."
msgstr ""
"Specify the type of object for which to create the film.\n"
"The object can be of type: Gerber or Geometry.\n"
"The selection here decide the type of objects that will be\n"
"in the Film Object combobox."

#: flatcamTools/ToolFilm.py:71
msgid "Film Object:"
msgstr "Film Object:"

#: flatcamTools/ToolFilm.py:73
msgid "Object for which to create the film."
msgstr "Object for which to create the film."

#: flatcamTools/ToolFilm.py:89 flatcamTools/ToolPanelize.py:111
msgid "Box Type:"
msgstr "Box Type:"

#: flatcamTools/ToolFilm.py:91
msgid ""
"Specify the type of object to be used as an container for\n"
"film creation. It can be: Gerber or Geometry type.The selection here decide "
"the type of objects that will be\n"
"in the Box Object combobox."
msgstr ""
"Specify the type of object to be used as an container for\n"
"film creation. It can be: Gerber or Geometry type.The selection here decide "
"the type of objects that will be\n"
"in the Box Object combobox."

#: flatcamTools/ToolFilm.py:104 flatcamTools/ToolPanelize.py:126
msgid "Box Object:"
msgstr "Box Object:"

#: flatcamTools/ToolFilm.py:106
msgid ""
"The actual object that is used a container for the\n"
" selected object for which we create the film.\n"
"Usually it is the PCB outline but it can be also the\n"
"same object for which the film is created."
msgstr ""
"The actual object that is used a container for the\n"
" selected object for which we create the film.\n"
"Usually it is the PCB outline but it can be also the\n"
"same object for which the film is created."

#: flatcamTools/ToolFilm.py:157
msgid "Save Film"
msgstr "Save Film"

#: flatcamTools/ToolFilm.py:159
msgid ""
"Create a Film for the selected object, within\n"
"the specified box. Does not create a new \n"
" FlatCAM object, but directly save it in SVG format\n"
"which can be opened with Inkscape."
msgstr ""
"Create a Film for the selected object, within\n"
"the specified box. Does not create a new \n"
" FlatCAM object, but directly save it in SVG format\n"
"which can be opened with Inkscape."

#: flatcamTools/ToolFilm.py:225
msgid ""
"[ERROR_NOTCL] No FlatCAM object selected. Load an object for Film and retry."
msgstr ""
"[ERROR_NOTCL] No FlatCAM object selected. Load an object for Film and retry."

#: flatcamTools/ToolFilm.py:231
msgid ""
"[ERROR_NOTCL] No FlatCAM object selected. Load an object for Box and retry."
msgstr ""
"[ERROR_NOTCL] No FlatCAM object selected. Load an object for Box and retry."

#: flatcamTools/ToolFilm.py:255
msgid "Generating Film ..."
msgstr "Generating Film ..."

#: flatcamTools/ToolFilm.py:260 flatcamTools/ToolFilm.py:264
msgid "Export SVG positive"
msgstr "Export SVG positive"

#: flatcamTools/ToolFilm.py:269
msgid "[WARNING_NOTCL] Export SVG positive cancelled."
msgstr "[WARNING_NOTCL] Export SVG positive cancelled."

#: flatcamTools/ToolFilm.py:276 flatcamTools/ToolFilm.py:280
msgid "Export SVG negative"
msgstr "Export SVG negative"

#: flatcamTools/ToolFilm.py:285
msgid "[WARNING_NOTCL] Export SVG negative cancelled."
msgstr "[WARNING_NOTCL] Export SVG negative cancelled."

#: flatcamTools/ToolImage.py:25
msgid "Image as Object"
msgstr "Image as Object"

#: flatcamTools/ToolImage.py:31
msgid "Image to PCB"
msgstr "Image to PCB"

#: flatcamTools/ToolImage.py:55
msgid ""
"Specify the type of object to create from the image.\n"
"It can be of type: Gerber or Geometry."
msgstr ""
"Specify the type of object to create from the image.\n"
"It can be of type: Gerber or Geometry."

#: flatcamTools/ToolImage.py:63
msgid "DPI value:"
msgstr "DPI value:"

#: flatcamTools/ToolImage.py:65
msgid "Specify a DPI value for the image."
msgstr "Specify a DPI value for the image."

#: flatcamTools/ToolImage.py:72
msgid "Level of detail"
msgstr "Level of detail"

#: flatcamTools/ToolImage.py:81
msgid "Image type"
msgstr "Image type"

#: flatcamTools/ToolImage.py:83
msgid ""
"Choose a method for the image interpretation.\n"
"B/W means a black & white image. Color means a colored image."
msgstr ""
"Choose a method for the image interpretation.\n"
"B/W means a black & white image. Color means a colored image."

#: flatcamTools/ToolImage.py:90 flatcamTools/ToolImage.py:103
#: flatcamTools/ToolImage.py:114 flatcamTools/ToolImage.py:125
msgid "Mask value"
msgstr "Mask value"

#: flatcamTools/ToolImage.py:92
msgid ""
"Mask for monochrome image.\n"
"Takes values between [0 ... 255].\n"
"Decides the level of details to include\n"
"in the resulting geometry.\n"
"0 means no detail and 255 means everything \n"
"(which is totally black)."
msgstr ""
"Mask for monochrome image.\n"
"Takes values between [0 ... 255].\n"
"Decides the level of details to include\n"
"in the resulting geometry.\n"
"0 means no detail and 255 means everything \n"
"(which is totally black)."

#: flatcamTools/ToolImage.py:105
msgid ""
"Mask for RED color.\n"
"Takes values between [0 ... 255].\n"
"Decides the level of details to include\n"
"in the resulting geometry."
msgstr ""
"Mask for RED color.\n"
"Takes values between [0 ... 255].\n"
"Decides the level of details to include\n"
"in the resulting geometry."

#: flatcamTools/ToolImage.py:116
msgid ""
"Mask for GREEN color.\n"
"Takes values between [0 ... 255].\n"
"Decides the level of details to include\n"
"in the resulting geometry."
msgstr ""
"Mask for GREEN color.\n"
"Takes values between [0 ... 255].\n"
"Decides the level of details to include\n"
"in the resulting geometry."

#: flatcamTools/ToolImage.py:127
msgid ""
"Mask for BLUE color.\n"
"Takes values between [0 ... 255].\n"
"Decides the level of details to include\n"
"in the resulting geometry."
msgstr ""
"Mask for BLUE color.\n"
"Takes values between [0 ... 255].\n"
"Decides the level of details to include\n"
"in the resulting geometry."

#: flatcamTools/ToolImage.py:139
msgid "Import image"
msgstr "Import image"

#: flatcamTools/ToolImage.py:141
msgid "Open a image of raster type and then import it in FlatCAM."
msgstr "Open a image of raster type and then import it in FlatCAM."

#: flatcamTools/ToolImage.py:170
msgid "Image Tool"
msgstr "Image Tool"

#: flatcamTools/ToolImage.py:200 flatcamTools/ToolImage.py:203
msgid "Import IMAGE"
msgstr "Import IMAGE"

#: flatcamTools/ToolMeasurement.py:26
msgid "Measurement"
msgstr "Measurement"

#: flatcamTools/ToolMeasurement.py:44
msgid "Units:"
msgstr "Units:"

#: flatcamTools/ToolMeasurement.py:45
msgid "Those are the units in which the distance is measured."
msgstr "Those are the units in which the distance is measured."

#: flatcamTools/ToolMeasurement.py:49
msgid "Start"
msgstr "Start"

#: flatcamTools/ToolMeasurement.py:49 flatcamTools/ToolMeasurement.py:52
msgid "Coords"
msgstr "Coords"

#: flatcamTools/ToolMeasurement.py:50 flatcamTools/ToolMeasurement.py:66
msgid "This is measuring Start point coordinates."
msgstr "This is measuring Start point coordinates."

#: flatcamTools/ToolMeasurement.py:52
msgid "Stop"
msgstr "Stop"

#: flatcamTools/ToolMeasurement.py:53 flatcamTools/ToolMeasurement.py:70
msgid "This is the measuring Stop point coordinates."
msgstr "This is the measuring Stop point coordinates."

#: flatcamTools/ToolMeasurement.py:55
msgid "Dx:"
msgstr "Dx:"

#: flatcamTools/ToolMeasurement.py:56 flatcamTools/ToolMeasurement.py:74
msgid "This is the distance measured over the X axis."
msgstr "This is the distance measured over the X axis."

#: flatcamTools/ToolMeasurement.py:58
msgid "Dy:"
msgstr "Dy:"

#: flatcamTools/ToolMeasurement.py:59 flatcamTools/ToolMeasurement.py:79
msgid "This is the distance measured over the Y axis."
msgstr "This is the distance measured over the Y axis."

#: flatcamTools/ToolMeasurement.py:61
msgid "DISTANCE"
msgstr "DISTANCE"

#: flatcamTools/ToolMeasurement.py:62 flatcamTools/ToolMeasurement.py:84
msgid "This is the point to point Euclidian distance."
msgstr "This is the point to point Euclidian distance."

#: flatcamTools/ToolMeasurement.py:86
msgid "Measure"
msgstr "Measure"

#: flatcamTools/ToolMeasurement.py:132
msgid "Meas. Tool"
msgstr "Meas. Tool"

#: flatcamTools/ToolMeasurement.py:177
msgid "MEASURING: Click on the Start point ..."
msgstr "MEASURING: Click on the Start point ..."

#: flatcamTools/ToolMeasurement.py:270
msgid "MEASURING: Click on the Destination point ..."
msgstr "MEASURING: Click on the Destination point ..."

#: flatcamTools/ToolMeasurement.py:278
#, python-brace-format
msgid "MEASURING: Result D(x) = {d_x} | D(y) = {d_y} | Distance = {d_z}"
msgstr "MEASURING: Result D(x) = {d_x} | D(y) = {d_y} | Distance = {d_z}"

#: flatcamTools/ToolMove.py:81
msgid "MOVE: Click on the Start point ..."
msgstr "MOVE: Click on the Start point ..."

#: flatcamTools/ToolMove.py:88
msgid "[WARNING_NOTCL] MOVE action cancelled. No object(s) to move."
msgstr "[WARNING_NOTCL] MOVE action cancelled. No object(s) to move."

#: flatcamTools/ToolMove.py:110
msgid "MOVE: Click on the Destination point ..."
msgstr "MOVE: Click on the Destination point ..."

#: flatcamTools/ToolMove.py:128
msgid "Moving ..."
msgstr "Moving ..."

#: flatcamTools/ToolMove.py:135
msgid "[WARNING_NOTCL] No object(s) selected."
msgstr "[WARNING_NOTCL] No object(s) selected."

#: flatcamTools/ToolMove.py:158
#, python-format
msgid "[ERROR_NOTCL] ToolMove.on_left_click() --> %s"
msgstr "[ERROR_NOTCL] ToolMove.on_left_click() --> %s"

#: flatcamTools/ToolMove.py:164
#, python-format
msgid "[success] %s object was moved ..."
msgstr "[success] %s object was moved ..."

#: flatcamTools/ToolMove.py:174
msgid "[ERROR_NOTCL] ToolMove.on_left_click() --> Error when mouse left click."
msgstr ""
"[ERROR_NOTCL] ToolMove.on_left_click() --> Error when mouse left click."

#: flatcamTools/ToolMove.py:202
msgid "[WARNING_NOTCL] Move action cancelled."
msgstr "[WARNING_NOTCL] Move action cancelled."

#: flatcamTools/ToolMove.py:214
msgid "[WARNING_NOTCL] Object(s) not selected"
msgstr "[WARNING_NOTCL] Object(s) not selected"

#: flatcamTools/ToolNonCopperClear.py:26
msgid "Non-Copper Clearing"
msgstr "Non-Copper Clearing"

#: flatcamTools/ToolNonCopperClear.py:64
msgid "Gerber object to be cleared of excess copper.                        "
msgstr "Gerber object to be cleared of excess copper.                        "

#: flatcamTools/ToolNonCopperClear.py:74
msgid ""
"Tools pool from which the algorithm\n"
"will pick the ones used for copper clearing."
msgstr ""
"Tools pool from which the algorithm\n"
"will pick the ones used for copper clearing."

#: flatcamTools/ToolNonCopperClear.py:89
msgid ""
"This is the Tool Number.\n"
"Non copper clearing will start with the tool with the biggest \n"
"diameter, continuing until there are no more tools.\n"
"Only tools that create NCC clearing geometry will still be present\n"
"in the resulting geometry. This is because with some tools\n"
"this function will not be able to create painting geometry."
msgstr ""
"This is the Tool Number.\n"
"Non copper clearing will start with the tool with the biggest \n"
"diameter, continuing until there are no more tools.\n"
"Only tools that create NCC clearing geometry will still be present\n"
"in the resulting geometry. This is because with some tools\n"
"this function will not be able to create painting geometry."

#: flatcamTools/ToolNonCopperClear.py:101 flatcamTools/ToolPaint.py:98
msgid ""
"The Tool Type (TT) can be:<BR>- <B>Circular</B> with 1 ... 4 teeth -> it is "
"informative only. Being circular, <BR>the cut width in material is exactly "
"the tool diameter.<BR>- <B>Ball</B> -> informative only and make reference "
"to the Ball type endmill.<BR>- <B>V-Shape</B> -> it will disable de Z-Cut "
"parameter in the resulting geometry UI form and enable two additional UI "
"form fields in the resulting geometry: V-Tip Dia and V-Tip Angle. Adjusting "
"those two values will adjust the Z-Cut parameter such as the cut width into "
"material will be equal with the value in the Tool Diameter column of this "
"table.<BR>Choosing the <B>V-Shape</B> Tool Type automatically will select "
"the Operation Type in the resulting geometry as Isolation."
msgstr ""
"The Tool Type (TT) can be:<BR>- <B>Circular</B> with 1 ... 4 teeth -> it is "
"informative only. Being circular, <BR>the cut width in material is exactly "
"the tool diameter.<BR>- <B>Ball</B> -> informative only and make reference "
"to the Ball type endmill.<BR>- <B>V-Shape</B> -> it will disable de Z-Cut "
"parameter in the resulting geometry UI form and enable two additional UI "
"form fields in the resulting geometry: V-Tip Dia and V-Tip Angle. Adjusting "
"those two values will adjust the Z-Cut parameter such as the cut width into "
"material will be equal with the value in the Tool Diameter column of this "
"table.<BR>Choosing the <B>V-Shape</B> Tool Type automatically will select "
"the Operation Type in the resulting geometry as Isolation."

#: flatcamTools/ToolNonCopperClear.py:120 flatcamTools/ToolPaint.py:117
msgid "Tool Dia"
msgstr "Tool Dia"

#: flatcamTools/ToolNonCopperClear.py:122
msgid "Diameter for the new tool to add in the Tool Table"
msgstr "Diameter for the new tool to add in the Tool Table"

#: flatcamTools/ToolNonCopperClear.py:148 flatcamTools/ToolPaint.py:145
#: flatcamTools/ToolSolderPaste.py:123
msgid ""
"Delete a selection of tools in the Tool Table\n"
"by first selecting a row(s) in the Tool Table."
msgstr ""
"Delete a selection of tools in the Tool Table\n"
"by first selecting a row(s) in the Tool Table."

#: flatcamTools/ToolNonCopperClear.py:199
msgid "Standard"
msgstr "Standard"

#: flatcamTools/ToolNonCopperClear.py:200
msgid "Seed-based"
msgstr "Seed-based"

#: flatcamTools/ToolNonCopperClear.py:201
msgid "Straight lines"
msgstr "Straight lines"

#: flatcamTools/ToolNonCopperClear.py:226
msgid ""
"If checked, use 'rest machining'.\n"
"Basically it will clear copper outside PCB features,\n"
"using the biggest tool and continue with the next tools,\n"
"from bigger to smaller, to clear areas of copper that\n"
"could not be cleared by previous tool, until there is\n"
"no more copper to clear or there are no more tools.\n"
"If not checked, use the standard algorithm."
msgstr ""
"If checked, use 'rest machining'.\n"
"Basically it will clear copper outside PCB features,\n"
"using the biggest tool and continue with the next tools,\n"
"from bigger to smaller, to clear areas of copper that\n"
"could not be cleared by previous tool, until there is\n"
"no more copper to clear or there are no more tools.\n"
"If not checked, use the standard algorithm."

#: flatcamTools/ToolNonCopperClear.py:238
msgid "Generate Geometry"
msgstr "Generate Geometry"

#: flatcamTools/ToolNonCopperClear.py:485 flatcamTools/ToolPaint.py:544
#: flatcamTools/ToolSolderPaste.py:761
msgid "[WARNING_NOTCL] Please enter a tool diameter to add, in Float format."
msgstr "[WARNING_NOTCL] Please enter a tool diameter to add, in Float format."

#: flatcamTools/ToolNonCopperClear.py:513 flatcamTools/ToolPaint.py:568
msgid "[WARNING_NOTCL] Adding tool cancelled. Tool already in Tool Table."
msgstr "[WARNING_NOTCL] Adding tool cancelled. Tool already in Tool Table."

#: flatcamTools/ToolNonCopperClear.py:518 flatcamTools/ToolPaint.py:573
msgid "[success] New tool added to Tool Table."
msgstr "[success] New tool added to Tool Table."

#: flatcamTools/ToolNonCopperClear.py:560 flatcamTools/ToolPaint.py:616
msgid "[success] Tool from Tool Table was edited."
msgstr "[success] Tool from Tool Table was edited."

#: flatcamTools/ToolNonCopperClear.py:571 flatcamTools/ToolPaint.py:627
#: flatcamTools/ToolSolderPaste.py:847
msgid ""
"[WARNING_NOTCL] Edit cancelled. New diameter value is already in the Tool "
"Table."
msgstr ""
"[WARNING_NOTCL] Edit cancelled. New diameter value is already in the Tool "
"Table."

#: flatcamTools/ToolNonCopperClear.py:610 flatcamTools/ToolPaint.py:724
msgid "[WARNING_NOTCL] Delete failed. Select a tool to delete."
msgstr "[WARNING_NOTCL] Delete failed. Select a tool to delete."

#: flatcamTools/ToolNonCopperClear.py:615 flatcamTools/ToolPaint.py:729
msgid "[success] Tool(s) deleted from Tool Table."
msgstr "[success] Tool(s) deleted from Tool Table."

#: flatcamTools/ToolNonCopperClear.py:633 flatcamTools/ToolPaint.py:748
msgid ""
"[ERROR_NOTCL] Overlap value must be between 0 (inclusive) and 1 (exclusive), "
msgstr ""
"[ERROR_NOTCL] Overlap value must be between 0 (inclusive) and 1 (exclusive), "

#: flatcamTools/ToolNonCopperClear.py:673
msgid "[ERROR_NOTCL] No Gerber file available."
msgstr "[ERROR_NOTCL] No Gerber file available."

#: flatcamTools/ToolNonCopperClear.py:711
#: flatcamTools/ToolNonCopperClear.py:833
msgid "Clearing Non-Copper areas."
msgstr "Clearing Non-Copper areas."

#: flatcamTools/ToolNonCopperClear.py:729
#, python-format
msgid "[success] Non-Copper Clearing with ToolDia = %s started."
msgstr "[success] Non-Copper Clearing with ToolDia = %s started."

#: flatcamTools/ToolNonCopperClear.py:798
#, python-format
msgid "[ERROR_NOTCL] NCCTool.clear_non_copper() --> %s"
msgstr "[ERROR_NOTCL] NCCTool.clear_non_copper() --> %s"

#: flatcamTools/ToolNonCopperClear.py:803
msgid "[success] NCC Tool finished."
msgstr "[success] NCC Tool finished."

#: flatcamTools/ToolNonCopperClear.py:805
msgid ""
"[WARNING_NOTCL] NCC Tool finished but some PCB features could not be "
"cleared. Check the result."
msgstr ""
"[WARNING_NOTCL] NCC Tool finished but some PCB features could not be "
"cleared. Check the result."

#: flatcamTools/ToolNonCopperClear.py:851
#, python-format
msgid "[success] Non-Copper Rest Clearing with ToolDia = %s started."
msgstr "[success] Non-Copper Rest Clearing with ToolDia = %s started."

#: flatcamTools/ToolNonCopperClear.py:949
#, python-format
msgid "[ERROR_NOTCL] NCCTool.clear_non_copper_rest() --> %s"
msgstr "[ERROR_NOTCL] NCCTool.clear_non_copper_rest() --> %s"

#: flatcamTools/ToolNonCopperClear.py:957
msgid ""
"[ERROR_NOTCL] NCC Tool finished but could not clear the object with current "
"settings."
msgstr ""
"[ERROR_NOTCL] NCC Tool finished but could not clear the object with current "
"settings."

#: flatcamTools/ToolPDF.py:38
msgid "PDF Import Tool"
msgstr "PDF Import Tool"

#: flatcamTools/ToolPDF.py:152 flatcamTools/ToolPDF.py:156
msgid "Open PDF"
msgstr "Open PDF"

#: flatcamTools/ToolPDF.py:159
msgid "[WARNING_NOTCL] Open PDF cancelled."
msgstr "[WARNING_NOTCL] Open PDF cancelled."

#: flatcamTools/ToolPDF.py:186
msgid "Parsing PDF file ..."
msgstr "Parsing PDF file ..."

#: flatcamTools/ToolPDF.py:265 flatcamTools/ToolPDF.py:338
#, python-format
msgid "Rendering PDF layer #%d ..."
msgstr "Rendering PDF layer #%d ..."

#: flatcamTools/ToolPDF.py:269 flatcamTools/ToolPDF.py:342
msgid "[ERROR_NOTCL] Open PDF file failed."
msgstr "[ERROR_NOTCL] Open PDF file failed."

#: flatcamTools/ToolPDF.py:274 flatcamTools/ToolPDF.py:347
#, python-format
msgid "[success] Rendered: %s"
msgstr "[success] Rendered: %s"

#: flatcamTools/ToolPaint.py:24
msgid "Paint Area"
msgstr "Paint Area"

#: flatcamTools/ToolPaint.py:60
msgid "Geometry:"
msgstr "Geometry:"

#: flatcamTools/ToolPaint.py:62
msgid "Geometry object to be painted.                        "
msgstr "Geometry object to be painted.                        "

#: flatcamTools/ToolPaint.py:71
msgid ""
"Tools pool from which the algorithm\n"
"will pick the ones used for painting."
msgstr ""
"Tools pool from which the algorithm\n"
"will pick the ones used for painting."

#: flatcamTools/ToolPaint.py:86
msgid ""
"This is the Tool Number.\n"
"Painting will start with the tool with the biggest diameter,\n"
"continuing until there are no more tools.\n"
"Only tools that create painting geometry will still be present\n"
"in the resulting geometry. This is because with some tools\n"
"this function will not be able to create painting geometry."
msgstr ""
"This is the Tool Number.\n"
"Painting will start with the tool with the biggest diameter,\n"
"continuing until there are no more tools.\n"
"Only tools that create painting geometry will still be present\n"
"in the resulting geometry. This is because with some tools\n"
"this function will not be able to create painting geometry."

#: flatcamTools/ToolPaint.py:119
msgid "Diameter for the new tool."
msgstr "Diameter for the new tool."

#: flatcamTools/ToolPaint.py:224
msgid ""
"If checked, use 'rest machining'.\n"
"Basically it will clear copper outside PCB features,\n"
"using the biggest tool and continue with the next tools,\n"
"from bigger to smaller, to clear areas of copper that\n"
"could not be cleared by previous tool, until there is\n"
"no more copper to clear or there are no more tools.\n"
"\n"
"If not checked, use the standard algorithm."
msgstr ""
"If checked, use 'rest machining'.\n"
"Basically it will clear copper outside PCB features,\n"
"using the biggest tool and continue with the next tools,\n"
"from bigger to smaller, to clear areas of copper that\n"
"could not be cleared by previous tool, until there is\n"
"no more copper to clear or there are no more tools.\n"
"\n"
"If not checked, use the standard algorithm."

#: flatcamTools/ToolPaint.py:239
msgid ""
"How to select the polygons to paint.<BR>Options:<BR>- <B>Single</B>: left "
"mouse click on the polygon to be painted.<BR>- <B>All</B>: paint all "
"polygons."
msgstr ""
"How to select the polygons to paint.<BR>Options:<BR>- <B>Single</B>: left "
"mouse click on the polygon to be painted.<BR>- <B>All</B>: paint all "
"polygons."

#: flatcamTools/ToolPaint.py:254
msgid "Create Paint Geometry"
msgstr "Create Paint Geometry"

#: flatcamTools/ToolPaint.py:256
msgid ""
"After clicking here, click inside<BR>the polygon you wish to be painted if "
"<B>Single</B> is selected.<BR>If <B>All</B>  is selected then the Paint will "
"start after click.<BR>A new Geometry object with the tool<BR>paths will be "
"created."
msgstr ""
"After clicking here, click inside<BR>the polygon you wish to be painted if "
"<B>Single</B> is selected.<BR>If <B>All</B>  is selected then the Paint will "
"start after click.<BR>A new Geometry object with the tool<BR>paths will be "
"created."

#: flatcamTools/ToolPaint.py:733
msgid "geometry_on_paint_button"
msgstr "geometry_on_paint_button"

#: flatcamTools/ToolPaint.py:752 flatcamTools/ToolPaint.py:787
msgid "[WARNING_NOTCL] Click inside the desired polygon."
msgstr "[WARNING_NOTCL] Click inside the desired polygon."

#: flatcamTools/ToolPaint.py:774
msgid "[ERROR_NOTCL] Can't do Paint on MultiGeo geometries ..."
msgstr "[ERROR_NOTCL] Can't do Paint on MultiGeo geometries ..."

#: flatcamTools/ToolPaint.py:796 flatcamTools/ToolPaint.py:1003
msgid "Painting polygon..."
msgstr "Painting polygon..."

#: flatcamTools/ToolPaint.py:851
msgid "[WARNING] No polygon found."
msgstr "[WARNING] No polygon found."

#: flatcamTools/ToolPaint.py:854
msgid "Painting polygon."
msgstr "Painting polygon."

#: flatcamTools/ToolPaint.py:896
msgid "[ERROR_NOTCL] Geometry could not be painted completely"
msgstr "[ERROR_NOTCL] Geometry could not be painted completely"

#: flatcamTools/ToolPaint.py:922
#, python-format
msgid ""
"[ERROR] Could not do Paint. Try a different combination of parameters. Or a "
"different strategy of paint\n"
"%s"
msgstr ""
"[ERROR] Could not do Paint. Try a different combination of parameters. Or a "
"different strategy of paint\n"
"%s"

#: flatcamTools/ToolPaint.py:964
#, python-format
msgid "[ERROR_NOTCL] PaintTool.paint_poly() --> %s"
msgstr "[ERROR_NOTCL] PaintTool.paint_poly() --> %s"

#: flatcamTools/ToolPaint.py:970 flatcamTools/ToolPaint.py:1267
msgid "Polygon Paint started ..."
msgstr "Polygon Paint started ..."

#: flatcamTools/ToolPaint.py:1123 flatcamTools/ToolPaint.py:1212
#, python-format
msgid ""
"[ERROR] Could not do Paint All. Try a different combination of parameters. "
"Or a different Method of paint\n"
"%s"
msgstr ""
"[ERROR] Could not do Paint All. Try a different combination of parameters. "
"Or a different Method of paint\n"
"%s"

#: flatcamTools/ToolPaint.py:1147
msgid ""
"[ERROR] There is no Painting Geometry in the file.\n"
"Usually it means that the tool diameter is too big for the painted "
"geometry.\n"
"Change the painting parameters and try again."
msgstr ""
"[ERROR] There is no Painting Geometry in the file.\n"
"Usually it means that the tool diameter is too big for the painted "
"geometry.\n"
"Change the painting parameters and try again."

#: flatcamTools/ToolPaint.py:1156
msgid "[success] Paint All Done."
msgstr "[success] Paint All Done."

#: flatcamTools/ToolPaint.py:1242
msgid ""
"[ERROR_NOTCL] There is no Painting Geometry in the file.\n"
"Usually it means that the tool diameter is too big for the painted "
"geometry.\n"
"Change the painting parameters and try again."
msgstr ""
"[ERROR_NOTCL] There is no Painting Geometry in the file.\n"
"Usually it means that the tool diameter is too big for the painted "
"geometry.\n"
"Change the painting parameters and try again."

#: flatcamTools/ToolPaint.py:1251
msgid "[success] Paint All with Rest-Machining done."
msgstr "[success] Paint All with Rest-Machining done."

#: flatcamTools/ToolPanelize.py:25
msgid "Panelize PCB"
msgstr "Panelize PCB"

#: flatcamTools/ToolPanelize.py:58
msgid ""
"Specify the type of object to be panelized\n"
"It can be of type: Gerber, Excellon or Geometry.\n"
"The selection here decide the type of objects that will be\n"
"in the Object combobox."
msgstr ""
"Specify the type of object to be panelized\n"
"It can be of type: Gerber, Excellon or Geometry.\n"
"The selection here decide the type of objects that will be\n"
"in the Object combobox."

#: flatcamTools/ToolPanelize.py:73
msgid ""
"Object to be panelized. This means that it will\n"
"be duplicated in an array of rows and columns."
msgstr ""
"Object to be panelized. This means that it will\n"
"be duplicated in an array of rows and columns."

#: flatcamTools/ToolPanelize.py:86
msgid "<b>Penelization Reference:</b>"
msgstr "<b>Penelization Reference:</b>"

#: flatcamTools/ToolPanelize.py:88
msgid ""
"Choose the reference for panelization:\n"
"- Object = the bounding box of a different object\n"
"- Bounding Box = the bounding box of the object to be panelized\n"
"\n"
"The reference is useful when doing panelization for more than one\n"
"object. The spacings (really offsets) will be applied in reference\n"
"to this reference object therefore maintaining the panelized\n"
"objects in sync."
msgstr ""
"Choose the reference for panelization:\n"
"- Object = the bounding box of a different object\n"
"- Bounding Box = the bounding box of the object to be panelized\n"
"\n"
"The reference is useful when doing panelization for more than one\n"
"object. The spacings (really offsets) will be applied in reference\n"
"to this reference object therefore maintaining the panelized\n"
"objects in sync."

#: flatcamTools/ToolPanelize.py:113
msgid ""
"Specify the type of object to be used as an container for\n"
"panelization. It can be: Gerber or Geometry type.\n"
"The selection here decide the type of objects that will be\n"
"in the Box Object combobox."
msgstr ""
"Specify the type of object to be used as an container for\n"
"panelization. It can be: Gerber or Geometry type.\n"
"The selection here decide the type of objects that will be\n"
"in the Box Object combobox."

#: flatcamTools/ToolPanelize.py:128
msgid ""
"The actual object that is used a container for the\n"
" selected object that is to be panelized."
msgstr ""
"The actual object that is used a container for the\n"
" selected object that is to be panelized."

#: flatcamTools/ToolPanelize.py:134
msgid "<b>Panel Data:</b>"
msgstr "<b>Panel Data:</b>"

#: flatcamTools/ToolPanelize.py:136
msgid ""
"This informations will shape the resulting panel.\n"
"The number of rows and columns will set how many\n"
"duplicates of the original geometry will be generated.\n"
"\n"
"The spacings will set the distance between any two\n"
"elements of the panel array."
msgstr ""
"This informations will shape the resulting panel.\n"
"The number of rows and columns will set how many\n"
"duplicates of the original geometry will be generated.\n"
"\n"
"The spacings will set the distance between any two\n"
"elements of the panel array."

#: flatcamTools/ToolPanelize.py:183
msgid "<b>Panel Type:</b>"
msgstr "<b>Panel Type:</b>"

#: flatcamTools/ToolPanelize.py:185
msgid ""
"Choose the type of object for the panel object:\n"
"- Geometry\n"
"- Gerber"
msgstr ""
"Choose the type of object for the panel object:\n"
"- Geometry\n"
"- Gerber"

#: flatcamTools/ToolPanelize.py:193
msgid "Constrain panel within:"
msgstr "Constrain panel within:"

#: flatcamTools/ToolPanelize.py:227
msgid "Panelize Object"
msgstr "Panelize Object"

#: flatcamTools/ToolPanelize.py:229
msgid ""
"Panelize the specified object around the specified box.\n"
"In other words it creates multiple copies of the source object,\n"
"arranged in a 2D array of rows and columns."
msgstr ""
"Panelize the specified object around the specified box.\n"
"In other words it creates multiple copies of the source object,\n"
"arranged in a 2D array of rows and columns."

#: flatcamTools/ToolPanelize.py:370
#, python-format
msgid "[WARNING_NOTCL]No object Box. Using instead %s"
msgstr "[WARNING_NOTCL]No object Box. Using instead %s"

#: flatcamTools/ToolPanelize.py:453
msgid ""
"[ERROR_NOTCL] Columns or Rows are zero value. Change them to a positive "
"integer."
msgstr ""
"[ERROR_NOTCL] Columns or Rows are zero value. Change them to a positive "
"integer."

#: flatcamTools/ToolPanelize.py:478 flatcamTools/ToolPanelize.py:635
msgid "Generating panel ... Please wait."
msgstr "Generating panel ... Please wait."

#: flatcamTools/ToolPanelize.py:628
msgid "[success] Panel done..."
msgstr "[success] Panel done..."

#: flatcamTools/ToolPanelize.py:631
#, python-brace-format
msgid ""
"[WARNING] Too big for the constrain area. Final panel has {col} columns and "
"{row} rows"
msgstr ""
"[WARNING] Too big for the constrain area. Final panel has {col} columns and "
"{row} rows"

#: flatcamTools/ToolPanelize.py:640
msgid "[success] Panel created successfully."
msgstr "[success] Panel created successfully."

#: flatcamTools/ToolPcbWizard.py:32
msgid "PcbWizard Import Tool"
msgstr "PcbWizard Import Tool"

#: flatcamTools/ToolPcbWizard.py:40
msgid "Import 2-file Excellon"
msgstr "Import 2-file Excellon"

#: flatcamTools/ToolPcbWizard.py:57
msgid "Excellon file:"
msgstr "Excellon file:"

#: flatcamTools/ToolPcbWizard.py:59
msgid ""
"Load the Excellon file.\n"
"Usually it has a .DRL extension"
msgstr ""
"Load the Excellon file.\n"
"Usually it has a .DRL extension"

#: flatcamTools/ToolPcbWizard.py:66
msgid "INF file:"
msgstr "INF file:"

#: flatcamTools/ToolPcbWizard.py:68
msgid "Load the INF file."
msgstr "Load the INF file."

#: flatcamTools/ToolPcbWizard.py:81
msgid "Tool Number"
msgstr "Tool Number"

#: flatcamTools/ToolPcbWizard.py:83
msgid "Tool diameter in file units."
msgstr "Tool diameter in file units."

#: flatcamTools/ToolPcbWizard.py:97
msgid "Int. digits:"
msgstr "Int. digits:"

#: flatcamTools/ToolPcbWizard.py:99
msgid "The number of digits for the integral part of the coordinates."
msgstr "The number of digits for the integral part of the coordinates."

#: flatcamTools/ToolPcbWizard.py:106
msgid "Frac. digits:"
msgstr "Frac. digits:"

#: flatcamTools/ToolPcbWizard.py:108
msgid "The number of digits for the fractional part of the coordinates."
msgstr "The number of digits for the fractional part of the coordinates."

#: flatcamTools/ToolPcbWizard.py:116
msgid "Zeros supp.:"
msgstr "Zeros supp.:"

#: flatcamTools/ToolPcbWizard.py:118
msgid ""
"The type of zeros suppression used.\n"
"Can be of type:\n"
"- LZ = leading zeros are kept\n"
"- TZ = trailing zeros are kept\n"
"- No Suppression = no zero suppression"
msgstr ""
"The type of zeros suppression used.\n"
"Can be of type:\n"
"- LZ = leading zeros are kept\n"
"- TZ = trailing zeros are kept\n"
"- No Suppression = no zero suppression"

#: flatcamTools/ToolPcbWizard.py:129
msgid "Units"
msgstr "Units"

#: flatcamTools/ToolPcbWizard.py:131
msgid ""
"The type of units that the coordinates and tool\n"
"diameters are using. Can be INCH or MM."
msgstr ""
"The type of units that the coordinates and tool\n"
"diameters are using. Can be INCH or MM."

#: flatcamTools/ToolPcbWizard.py:138
msgid "Import Excellon"
msgstr "Import Excellon"

#: flatcamTools/ToolPcbWizard.py:140
msgid ""
"Import in FlatCAM an Excellon file\n"
"that store it's information's in 2 files.\n"
"One usually has .DRL extension while\n"
"the other has .INF extension."
msgstr ""
"Import in FlatCAM an Excellon file\n"
"that store it's information's in 2 files.\n"
"One usually has .DRL extension while\n"
"the other has .INF extension."

#: flatcamTools/ToolPcbWizard.py:194
msgid "PCBWizard Tool"
msgstr "PCBWizard Tool"

#: flatcamTools/ToolPcbWizard.py:288 flatcamTools/ToolPcbWizard.py:292
msgid "Load PcbWizard Excellon file"
msgstr "Load PcbWizard Excellon file"

#: flatcamTools/ToolPcbWizard.py:312 flatcamTools/ToolPcbWizard.py:316
msgid "Load PcbWizard INF file"
msgstr "Load PcbWizard INF file"

#: flatcamTools/ToolPcbWizard.py:363
msgid ""
"[ERROR] The INF file does not contain the tool table.\n"
"Try to open the Excellon file from File -> Open -> Excellon\n"
"and edit the drill diameters manually."
msgstr ""
"[ERROR] The INF file does not contain the tool table.\n"
"Try to open the Excellon file from File -> Open -> Excellon\n"
"and edit the drill diameters manually."

#: flatcamTools/ToolPcbWizard.py:383
msgid "[success] PcbWizard .INF file loaded."
msgstr "[success] PcbWizard .INF file loaded."

#: flatcamTools/ToolPcbWizard.py:387
msgid "[success] Main PcbWizard Excellon file loaded."
msgstr "[success] Main PcbWizard Excellon file loaded."

#: flatcamTools/ToolPcbWizard.py:424
#, python-format
msgid "[ERROR_NOTCL] Cannot parse file: %s"
msgstr "[ERROR_NOTCL] Cannot parse file: %s"

#: flatcamTools/ToolPcbWizard.py:447
msgid "Importing Excellon."
msgstr "Importing Excellon."

#: flatcamTools/ToolPcbWizard.py:454
msgid "[ERROR_NOTCL] Import Excellon file failed."
msgstr "[ERROR_NOTCL] Import Excellon file failed."

#: flatcamTools/ToolPcbWizard.py:461
#, python-format
msgid "[success] Imported: %s"
msgstr "[success] Imported: %s"

#: flatcamTools/ToolPcbWizard.py:464
msgid "[WARNING_NOTCL] Excellon merging is in progress. Please wait..."
msgstr "[WARNING_NOTCL] Excellon merging is in progress. Please wait..."

#: flatcamTools/ToolPcbWizard.py:466
msgid "[ERROR_NOTCL] The imported Excellon file is None."
msgstr "[ERROR_NOTCL] The imported Excellon file is None."

#: flatcamTools/ToolProperties.py:103
msgid "[ERROR_NOTCL] Properties Tool was not displayed. No object selected."
msgstr "[ERROR_NOTCL] Properties Tool was not displayed. No object selected."

#: flatcamTools/ToolProperties.py:110
msgid "[success] Object Properties are displayed."
msgstr "[success] Object Properties are displayed."

#: flatcamTools/ToolProperties.py:111
msgid "Properties Tool"
msgstr "Properties Tool"

#: flatcamTools/ToolShell.py:69
msgid "...proccessing..."
msgstr "...proccessing..."

#: flatcamTools/ToolShell.py:71
#, python-format
msgid "...proccessing... [%s]"
msgstr "...proccessing... [%s]"

#: flatcamTools/ToolSolderPaste.py:37
msgid "Solder Paste Tool"
msgstr "Solder Paste Tool"

#: flatcamTools/ToolSolderPaste.py:65
msgid "Gerber Solder paste object.                        "
msgstr "Gerber Solder paste object.                        "

#: flatcamTools/ToolSolderPaste.py:72
msgid ""
"Tools pool from which the algorithm\n"
"will pick the ones used for dispensing solder paste."
msgstr ""
"Tools pool from which the algorithm\n"
"will pick the ones used for dispensing solder paste."

#: flatcamTools/ToolSolderPaste.py:87
msgid ""
"This is the Tool Number.\n"
"The solder dispensing will start with the tool with the biggest \n"
"diameter, continuing until there are no more Nozzle tools.\n"
"If there are no longer tools but there are still pads not covered\n"
" with solder paste, the app will issue a warning message box."
msgstr ""
"This is the Tool Number.\n"
"The solder dispensing will start with the tool with the biggest \n"
"diameter, continuing until there are no more Nozzle tools.\n"
"If there are no longer tools but there are still pads not covered\n"
" with solder paste, the app will issue a warning message box."

#: flatcamTools/ToolSolderPaste.py:94
msgid ""
"Nozzle tool Diameter. It's value (in current FlatCAM units)\n"
"is the width of the solder paste dispensed."
msgstr ""
"Nozzle tool Diameter. It's value (in current FlatCAM units)\n"
"is the width of the solder paste dispensed."

#: flatcamTools/ToolSolderPaste.py:101
msgid "New Nozzle Tool"
msgstr "New Nozzle Tool"

#: flatcamTools/ToolSolderPaste.py:117
msgid ""
"Add a new nozzle tool to the Tool Table\n"
"with the diameter specified above."
msgstr ""
"Add a new nozzle tool to the Tool Table\n"
"with the diameter specified above."

#: flatcamTools/ToolSolderPaste.py:129
msgid "Generate solder paste dispensing geometry."
msgstr "Generate solder paste dispensing geometry."

#: flatcamTools/ToolSolderPaste.py:142
msgid "STEP 1:"
msgstr "STEP 1:"

#: flatcamTools/ToolSolderPaste.py:144
msgid ""
"First step is to select a number of nozzle tools for usage\n"
"and then optionally modify the GCode parameters bellow."
msgstr ""
"First step is to select a number of nozzle tools for usage\n"
"and then optionally modify the GCode parameters bellow."

#: flatcamTools/ToolSolderPaste.py:147
msgid ""
"Select tools.\n"
"Modify parameters."
msgstr ""
"Select tools.\n"
"Modify parameters."

#: flatcamTools/ToolSolderPaste.py:236
msgid ""
"Feedrate (speed) while moving up vertically\n"
" to Dispense position (on Z plane)."
msgstr ""
"Feedrate (speed) while moving up vertically\n"
" to Dispense position (on Z plane)."

#: flatcamTools/ToolSolderPaste.py:290
msgid "Generate GCode"
msgstr "Generate GCode"

#: flatcamTools/ToolSolderPaste.py:292
msgid ""
"Generate GCode for Solder Paste dispensing\n"
"on PCB pads."
msgstr ""
"Generate GCode for Solder Paste dispensing\n"
"on PCB pads."

#: flatcamTools/ToolSolderPaste.py:308
msgid "STEP 2:"
msgstr "STEP 2:"

#: flatcamTools/ToolSolderPaste.py:310
msgid ""
"Second step is to create a solder paste dispensing\n"
"geometry out of an Solder Paste Mask Gerber file."
msgstr ""
"Second step is to create a solder paste dispensing\n"
"geometry out of an Solder Paste Mask Gerber file."

#: flatcamTools/ToolSolderPaste.py:326
msgid "Geo Result:"
msgstr "Geo Result:"

#: flatcamTools/ToolSolderPaste.py:328
msgid ""
"Geometry Solder Paste object.\n"
"The name of the object has to end in:\n"
"'_solderpaste' as a protection."
msgstr ""
"Geometry Solder Paste object.\n"
"The name of the object has to end in:\n"
"'_solderpaste' as a protection."

#: flatcamTools/ToolSolderPaste.py:337
msgid "STEP 3:"
msgstr "STEP 3:"

#: flatcamTools/ToolSolderPaste.py:339
msgid ""
"Third step is to select a solder paste dispensing geometry,\n"
"and then generate a CNCJob object.\n"
"\n"
"REMEMBER: if you want to create a CNCJob with new parameters,\n"
"first you need to generate a geometry with those new params,\n"
"and only after that you can generate an updated CNCJob."
msgstr ""
"Third step is to select a solder paste dispensing geometry,\n"
"and then generate a CNCJob object.\n"
"\n"
"REMEMBER: if you want to create a CNCJob with new parameters,\n"
"first you need to generate a geometry with those new params,\n"
"and only after that you can generate an updated CNCJob."

#: flatcamTools/ToolSolderPaste.py:359
msgid "CNC Result:"
msgstr "CNC Result:"

#: flatcamTools/ToolSolderPaste.py:361
msgid ""
"CNCJob Solder paste object.\n"
"In order to enable the GCode save section,\n"
"the name of the object has to end in:\n"
"'_solderpaste' as a protection."
msgstr ""
"CNCJob Solder paste object.\n"
"In order to enable the GCode save section,\n"
"the name of the object has to end in:\n"
"'_solderpaste' as a protection."

#: flatcamTools/ToolSolderPaste.py:371
msgid "View GCode"
msgstr "View GCode"

#: flatcamTools/ToolSolderPaste.py:373
msgid ""
"View the generated GCode for Solder Paste dispensing\n"
"on PCB pads."
msgstr ""
"View the generated GCode for Solder Paste dispensing\n"
"on PCB pads."

#: flatcamTools/ToolSolderPaste.py:377
msgid "Save GCode"
msgstr "Save GCode"

#: flatcamTools/ToolSolderPaste.py:379
msgid ""
"Save the generated GCode for Solder Paste dispensing\n"
"on PCB pads, to a file."
msgstr ""
"Save the generated GCode for Solder Paste dispensing\n"
"on PCB pads, to a file."

#: flatcamTools/ToolSolderPaste.py:383
msgid "STEP 4:"
msgstr "STEP 4:"

#: flatcamTools/ToolSolderPaste.py:385
msgid ""
"Fourth step (and last) is to select a CNCJob made from \n"
"a solder paste dispensing geometry, and then view/save it's GCode."
msgstr ""
"Fourth step (and last) is to select a CNCJob made from \n"
"a solder paste dispensing geometry, and then view/save it's GCode."

#: flatcamTools/ToolSolderPaste.py:413
msgid "Delete Object"
msgstr "Delete Object"

#: flatcamTools/ToolSolderPaste.py:789
msgid ""
"[WARNING_NOTCL] Adding Nozzle tool cancelled. Tool already in Tool Table."
msgstr ""
"[WARNING_NOTCL] Adding Nozzle tool cancelled. Tool already in Tool Table."

#: flatcamTools/ToolSolderPaste.py:794
msgid "[success] New Nozzle tool added to Tool Table."
msgstr "[success] New Nozzle tool added to Tool Table."

#: flatcamTools/ToolSolderPaste.py:836
msgid "[success] Nozzle tool from Tool Table was edited."
msgstr "[success] Nozzle tool from Tool Table was edited."

#: flatcamTools/ToolSolderPaste.py:892
msgid "[WARNING_NOTCL] Delete failed. Select a Nozzle tool to delete."
msgstr "[WARNING_NOTCL] Delete failed. Select a Nozzle tool to delete."

#: flatcamTools/ToolSolderPaste.py:897
msgid "[success] Nozzle tool(s) deleted from Tool Table."
msgstr "[success] Nozzle tool(s) deleted from Tool Table."

#: flatcamTools/ToolSolderPaste.py:952
msgid "[WARNING_NOTCL] No SolderPaste mask Gerber object loaded."
msgstr "[WARNING_NOTCL] No SolderPaste mask Gerber object loaded."

#: flatcamTools/ToolSolderPaste.py:969
msgid "Creating Solder Paste dispensing geometry."
msgstr "Creating Solder Paste dispensing geometry."

#: flatcamTools/ToolSolderPaste.py:981
msgid "[WARNING_NOTCL] No Nozzle tools in the tool table."
msgstr "[WARNING_NOTCL] No Nozzle tools in the tool table."

#: flatcamTools/ToolSolderPaste.py:1110
msgid "[success] Solder Paste geometry generated successfully..."
msgstr "[success] Solder Paste geometry generated successfully..."

#: flatcamTools/ToolSolderPaste.py:1116
msgid ""
"[WARNING_NOTCL] Some or all pads have no solder due of inadequate nozzle "
"diameters..."
msgstr ""
"[WARNING_NOTCL] Some or all pads have no solder due of inadequate nozzle "
"diameters..."

#: flatcamTools/ToolSolderPaste.py:1130
msgid "Generating Solder Paste dispensing geometry..."
msgstr "Generating Solder Paste dispensing geometry..."

#: flatcamTools/ToolSolderPaste.py:1150
msgid "[WARNING_NOTCL] There is no Geometry object available."
msgstr "[WARNING_NOTCL] There is no Geometry object available."

#: flatcamTools/ToolSolderPaste.py:1154
msgid ""
"[WARNING_NOTCL] This Geometry can't be processed. NOT a solder_paste_tool "
"geometry."
msgstr ""
"[WARNING_NOTCL] This Geometry can't be processed. NOT a solder_paste_tool "
"geometry."

#: flatcamTools/ToolSolderPaste.py:1259
#, python-format
msgid "[success] ToolSolderPaste CNCjob created: %s"
msgstr "[success] ToolSolderPaste CNCjob created: %s"

#: flatcamTools/ToolSolderPaste.py:1291 flatcamTools/ToolSolderPaste.py:1295
#: flatcamTools/ToolSolderPaste.py:1346
msgid ""
"[WARNING_NOTCL] This CNCJob object can't be processed. NOT a "
"solder_paste_tool CNCJob object."
msgstr ""
"[WARNING_NOTCL] This CNCJob object can't be processed. NOT a "
"solder_paste_tool CNCJob object."

#: flatcamTools/ToolSolderPaste.py:1318
msgid "[ERROR_NOTCL] No Gcode in the object..."
msgstr "[ERROR_NOTCL] No Gcode in the object..."

#: flatcamTools/ToolSolderPaste.py:1327
#, python-format
msgid "[ERROR] ToolSolderPaste.on_view_gcode() -->%s"
msgstr "[ERROR] ToolSolderPaste.on_view_gcode() -->%s"

#: flatcamTools/ToolSolderPaste.py:1356
msgid "Export GCode ..."
msgstr "Export GCode ..."

#: flatcamTools/ToolSolderPaste.py:1396
#, python-format
msgid "[success] Solder paste dispenser GCode file saved to: %s"
msgstr "[success] Solder paste dispenser GCode file saved to: %s"

#: flatcamTools/ToolSub.py:55
msgid "<b>Gerber Objects</b>"
msgstr "<b>Gerber Objects</b>"

#: flatcamTools/ToolSub.py:64 flatcamTools/ToolSub.py:110
msgid "Target:"
msgstr "Target:"

#: flatcamTools/ToolSub.py:66
msgid ""
"Gerber object from which to substract\n"
"the substractor Gerber object."
msgstr ""
"Gerber object from which to substract\n"
"the substractor Gerber object."

#: flatcamTools/ToolSub.py:78 flatcamTools/ToolSub.py:124
msgid "Substractor:"
msgstr "Substractor:"

#: flatcamTools/ToolSub.py:80
msgid ""
"Gerber object that will be substracted\n"
"from the target Gerber object."
msgstr ""
"Gerber object that will be substracted\n"
"from the target Gerber object."

#: flatcamTools/ToolSub.py:87
msgid "Substract Gerber"
msgstr "Substract Gerber"

#: flatcamTools/ToolSub.py:89
msgid ""
"Will remove the area occupied by the substractor\n"
"Gerber from the Target Gerber.\n"
"Can be used to remove the overlapping silkscreen\n"
"over the soldermask."
msgstr ""
"Will remove the area occupied by the substractor\n"
"Gerber from the Target Gerber.\n"
"Can be used to remove the overlapping silkscreen\n"
"over the soldermask."

#: flatcamTools/ToolSub.py:101
msgid "<b>Geometry Objects</b>"
msgstr "<b>Geometry Objects</b>"

#: flatcamTools/ToolSub.py:112
msgid ""
"Geometry object from which to substract\n"
"the substractor Geometry object."
msgstr ""
"Geometry object from which to substract\n"
"the substractor Geometry object."

#: flatcamTools/ToolSub.py:126
msgid ""
"Geometry object that will be substracted\n"
"from the target Geometry object."
msgstr ""
"Geometry object that will be substracted\n"
"from the target Geometry object."

#: flatcamTools/ToolSub.py:133
msgid "Substract Geometry"
msgstr "Substract Geometry"

#: flatcamTools/ToolSub.py:135
msgid ""
"Will remove the area occupied by the substractor\n"
"Geometry from the Target Geometry."
msgstr ""
"Will remove the area occupied by the substractor\n"
"Geometry from the Target Geometry."

#: flatcamTools/ToolSub.py:215
msgid "Sub Tool"
msgstr "Sub Tool"

#: flatcamTools/ToolSub.py:230 flatcamTools/ToolSub.py:421
msgid "[ERROR_NOTCL] No Target object loaded."
msgstr "[ERROR_NOTCL] No Target object loaded."

#: flatcamTools/ToolSub.py:242 flatcamTools/ToolSub.py:433
msgid "[ERROR_NOTCL] No Substractor object loaded."
msgstr "[ERROR_NOTCL] No Substractor object loaded."

#: flatcamTools/ToolSub.py:294
#, python-format
msgid "Parsing aperture %s geometry ..."
msgstr "Parsing aperture %s geometry ..."

#: flatcamTools/ToolSub.py:396 flatcamTools/ToolSub.py:539
msgid "Generating new object ..."
msgstr "Generating new object ..."

#: flatcamTools/ToolSub.py:399 flatcamTools/ToolSub.py:542
msgid "[ERROR_NOTCL] Generating new object failed."
msgstr "[ERROR_NOTCL] Generating new object failed."

#: flatcamTools/ToolSub.py:403 flatcamTools/ToolSub.py:547
#, python-format
msgid "[success] Created: %s"
msgstr "[success] Created: %s"

#: flatcamTools/ToolSub.py:444
msgid ""
"[ERROR_NOTCL] Currently, the Substractor geometry cannot be of type Multigeo."
msgstr ""
"[ERROR_NOTCL] Currently, the Substractor geometry cannot be of type Multigeo."

#: flatcamTools/ToolSub.py:489
msgid "Parsing solid_geometry ..."
msgstr "Parsing solid_geometry ..."

#: flatcamTools/ToolSub.py:491
#, python-format
msgid "Parsing tool %s geometry ..."
msgstr "Parsing tool %s geometry ..."

#: flatcamTools/ToolTransform.py:23
msgid "Object Transform"
msgstr "Object Transform"

#: flatcamTools/ToolTransform.py:84
msgid ""
"Rotate the selected object(s).\n"
"The point of reference is the middle of\n"
"the bounding box for all selected objects."
msgstr ""
"Rotate the selected object(s).\n"
"The point of reference is the middle of\n"
"the bounding box for all selected objects."

#: flatcamTools/ToolTransform.py:120 flatcamTools/ToolTransform.py:138
msgid ""
"Skew/shear the selected object(s).\n"
"The point of reference is the middle of\n"
"the bounding box for all selected objects."
msgstr ""
"Skew/shear the selected object(s).\n"
"The point of reference is the middle of\n"
"the bounding box for all selected objects."

#: flatcamTools/ToolTransform.py:176 flatcamTools/ToolTransform.py:193
msgid ""
"Scale the selected object(s).\n"
"The point of reference depends on \n"
"the Scale reference checkbox state."
msgstr ""
"Scale the selected object(s).\n"
"The point of reference depends on \n"
"the Scale reference checkbox state."

#: flatcamTools/ToolTransform.py:202
msgid ""
"Scale the selected object(s)\n"
"using the Scale Factor X for both axis."
msgstr ""
"Scale the selected object(s)\n"
"using the Scale Factor X for both axis."

#: flatcamTools/ToolTransform.py:250 flatcamTools/ToolTransform.py:267
msgid ""
"Offset the selected object(s).\n"
"The point of reference is the middle of\n"
"the bounding box for all selected objects.\n"
msgstr ""
"Offset the selected object(s).\n"
"The point of reference is the middle of\n"
"the bounding box for all selected objects.\n"

#: flatcamTools/ToolTransform.py:297 flatcamTools/ToolTransform.py:305
msgid ""
"Flip the selected object(s) over the X axis.\n"
"Does not create a new object.\n"
" "
msgstr ""
"Flip the selected object(s) over the X axis.\n"
"Does not create a new object.\n"
" "

#: flatcamTools/ToolTransform.py:637
msgid "[WARNING_NOTCL] No object selected. Please Select an object to rotate!"
msgstr "[WARNING_NOTCL] No object selected. Please Select an object to rotate!"

#: flatcamTools/ToolTransform.py:665
msgid "CNCJob objects can't be rotated."
msgstr "CNCJob objects can't be rotated."

#: flatcamTools/ToolTransform.py:673
msgid "[success] Rotate done ..."
msgstr "[success] Rotate done ..."

#: flatcamTools/ToolTransform.py:688
msgid "[WARNING_NOTCL] No object selected. Please Select an object to flip!"
msgstr "[WARNING_NOTCL] No object selected. Please Select an object to flip!"

#: flatcamTools/ToolTransform.py:723
msgid "CNCJob objects can't be mirrored/flipped."
msgstr "CNCJob objects can't be mirrored/flipped."

#: flatcamTools/ToolTransform.py:757
msgid ""
"[WARNING_NOTCL] No object selected. Please Select an object to shear/skew!"
msgstr ""
"[WARNING_NOTCL] No object selected. Please Select an object to shear/skew!"

#: flatcamTools/ToolTransform.py:779
msgid "CNCJob objects can't be skewed."
msgstr "CNCJob objects can't be skewed."

#: flatcamTools/ToolTransform.py:806
msgid "[WARNING_NOTCL] No object selected. Please Select an object to scale!"
msgstr "[WARNING_NOTCL] No object selected. Please Select an object to scale!"

#: flatcamTools/ToolTransform.py:839
msgid "CNCJob objects can't be scaled."
msgstr "CNCJob objects can't be scaled."

#: flatcamTools/ToolTransform.py:858
msgid "[WARNING_NOTCL] No object selected. Please Select an object to offset!"
msgstr "[WARNING_NOTCL] No object selected. Please Select an object to offset!"

#: flatcamTools/ToolTransform.py:867
msgid "CNCJob objects can't be offseted."
msgstr "CNCJob objects can't be offseted."

#~ msgid "Tool dia:                   "
#~ msgstr "Tool dia:                   "

#~ msgid ""
#~ "The diameter of the cutting\n"
#~ "tool.."
#~ msgstr ""
#~ "The diameter of the cutting\n"
#~ "tool.."

#~ msgid "Disable"
#~ msgstr "Disable"

#~ msgid "[WARNING_NOTCL] Move cancelled. No shape selected."
#~ msgstr "[WARNING_NOTCL] Move cancelled. No shape selected."

#~ msgid "Click on the Destination point..."
#~ msgstr "Click on the Destination point..."

#~ msgid "Copy as &Geom"
#~ msgstr "Copy as &Geom"

#~ msgid "Ap. Scale Factor:"
#~ msgstr "Ap. Scale Factor:"

#~ msgid ""
#~ "Change the size of the selected apertures.\n"
#~ "Factor by which to multiply\n"
#~ "geometric features of this object."
#~ msgstr ""
#~ "Change the size of the selected apertures.\n"
#~ "Factor by which to multiply\n"
#~ "geometric features of this object."

#~ msgid "Ap. Buffer Factor:"
#~ msgstr "Ap. Buffer Factor:"

#~ msgid ""
#~ "Change the size of the selected apertures.\n"
#~ "Factor by which to expand/shrink\n"
#~ "geometric features of this object."
#~ msgstr ""
#~ "Change the size of the selected apertures.\n"
#~ "Factor by which to expand/shrink\n"
#~ "geometric features of this object."

#~ msgid "[WARNING]No object Box. Using instead %s"
#~ msgstr "[WARNING]No object Box. Using instead %s"

#~ msgid "Path"
#~ msgstr "Path"

#~ msgid "In"
#~ msgstr "In"

#~ msgid "Out"
#~ msgstr "Out"

#~ msgid "Custom"
#~ msgstr "Custom"

#~ msgid "Angle"
#~ msgstr "Angle"

#~ msgid "Copy Drill(s)"
#~ msgstr "Copy Drill(s)"

#~ msgid "MMB"
#~ msgstr "MMB"

#~ msgid "RMB"
#~ msgstr "RMB"

#~ msgid "CTRL"
#~ msgstr "CTRL"

#~ msgid "SHIFT"
#~ msgstr "SHIFT"

#~ msgid "Climb"
#~ msgstr "Climb"

#~ msgid "Conv."
#~ msgstr "Conv."

#~ msgid "LZ"
#~ msgstr "LZ"

#~ msgid "TZ"
#~ msgstr "TZ"

#~ msgid "INCH"
#~ msgstr "INCH"

#~ msgid "MM"
#~ msgstr "MM"

#~ msgid "MH"
#~ msgstr "MH"

#~ msgid "Both"
#~ msgstr "Both"

#~ msgid "Decimal"
#~ msgstr "Decimal"

#~ msgid "No-Decimal"
#~ msgstr "No-Decimal"

#~ msgid "Travel"
#~ msgstr "Travel"

#~ msgid "X"
#~ msgstr "X"

#~ msgid "Y"
#~ msgstr "Y"

#~ msgid "Point"
#~ msgstr "Point"

#~ msgid "Box"
#~ msgstr "Box"

#~ msgid "Single"
#~ msgstr "Single"

#~ msgid "Pos"
#~ msgstr "Pos"

#~ msgid "Neg"
#~ msgstr "Neg"

#~ msgid "Gerber"
#~ msgstr "Gerber"

#~ msgid "Geo"
#~ msgstr "Geo"

#~ msgid "Solid   "
#~ msgstr "Solid   "

#~ msgid "M-Color   "
#~ msgstr "M-Color   "

#~ msgid "Done."
#~ msgstr "Done."

#~ msgid "Click on CENTER ..."
#~ msgstr "Click on CENTER ..."

#~ msgid "[success] Done. Region completed."
#~ msgstr "[success] Done. Region completed."

#~ msgid "Add an aperture to the aperture list"
#~ msgstr "Add an aperture to the aperture list"

#~ msgid "Go"
#~ msgstr "Go"

#~ msgid "Del Aperture:"
#~ msgstr "Del Aperture:"

#~ msgid ""
#~ "Delete a aperture in the aperture list.\n"
#~ "It will delete also the associated geometry."
#~ msgstr ""
#~ "Delete a aperture in the aperture list.\n"
#~ "It will delete also the associated geometry."

#~ msgid "Save && Close Edit"
#~ msgstr "Save && Close Edit"

#~ msgid ""
#~ "<b>Editor Shortcut list</b><br>\n"
#~ "            <br>\n"
#~ "            <strong><span style=\"color:#0000ff\">GEOMETRY EDITOR</span></"
#~ "strong><br>\n"
#~ "    \n"
#~ "            <table border=\"0\" cellpadding=\"0\" cellspacing=\"0\" style="
#~ "\"width:283px\">\n"
#~ "                <tbody>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\" width=\"89\"><strong>A</"
#~ "strong></td>\n"
#~ "                        <td width=\"194\">&nbsp;Draw an Arc</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>B</strong></td>\n"
#~ "                        <td>&nbsp;Buffer Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>C</strong></td>\n"
#~ "                        <td>&nbsp;Copy Geo Item</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>E</strong></td>\n"
#~ "                        <td>&nbsp;Polygon Intersection Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>I</strong></td>\n"
#~ "                        <td>&nbsp;Paint Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>J</strong></td>\n"
#~ "                        <td>&nbsp;Jump to Location (x, y)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>K</strong></td>\n"
#~ "                        <td>&nbsp;Toggle Corner Snap</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>M</strong></td>\n"
#~ "                        <td>&nbsp;Move Geo Item</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>N</strong></td>\n"
#~ "                        <td>&nbsp;Draw a Polygon</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>O</strong></td>\n"
#~ "                        <td>&nbsp;Draw a Circle</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>P</strong></td>\n"
#~ "                        <td>&nbsp;Draw a Path</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>R</strong></td>\n"
#~ "                        <td>&nbsp;Draw Rectangle</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>S</strong></td>\n"
#~ "                        <td>&nbsp;Polygon Substraction Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>T</strong></td>\n"
#~ "                        <td>&nbsp;Add Text Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>U</strong></td>\n"
#~ "                        <td>&nbsp;Polygon Union Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>X</strong></td>\n"
#~ "                        <td>&nbsp;Flip shape on X axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Y</strong></td>\n"
#~ "                        <td>&nbsp;Flip shape on Y axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>SHIFT+X</strong></td>\n"
#~ "                        <td>&nbsp;Skew shape on X axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>SHIFT+Y</strong></td>\n"
#~ "                        <td>&nbsp;Skew shape on Y axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+R</strong></td>\n"
#~ "                        <td>&nbsp;Editor Transformation Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+X</strong></td>\n"
#~ "                        <td>&nbsp;Offset shape on X axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+Y</strong></td>\n"
#~ "                        <td>&nbsp;Offset shape on Y axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>CTRL+M</strong></td>\n"
#~ "                        <td>&nbsp;Measurement Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>CTRL+S</strong></td>\n"
#~ "                        <td>&nbsp;Save Object and Exit Editor</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>CTRL+X</strong></td>\n"
#~ "                        <td>&nbsp;Polygon Cut Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Space</strong></td>\n"
#~ "                        <td>&nbsp;Rotate Geometry</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ENTER</strong></td>\n"
#~ "                        <td>&nbsp;Finish drawing for certain tools</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ESC</strong></td>\n"
#~ "                        <td>&nbsp;Abort and return to Select</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Del</strong></td>\n"
#~ "                        <td>&nbsp;Delete Shape</td>\n"
#~ "                    </tr>\n"
#~ "                </tbody>\n"
#~ "            </table>\n"
#~ "            <br>\n"
#~ "            <br>\n"
#~ "            <strong><span style=\"color:#ff0000\">EXCELLON EDITOR</span></"
#~ "strong><br>\n"
#~ "            <table border=\"0\" cellpadding=\"0\" cellspacing=\"0\" style="
#~ "\"width:283px\">\n"
#~ "                <tbody>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\" width=\"89\"><strong>A</"
#~ "strong></td>\n"
#~ "                        <td width=\"194\">&nbsp;Add Drill Array</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>C</strong></td>\n"
#~ "                        <td>&nbsp;Copy Drill(s)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>D</strong></td>\n"
#~ "                        <td>&nbsp;Add Drill</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>J</strong></td>\n"
#~ "                        <td>&nbsp;Jump to Location (x, y)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>M</strong></td>\n"
#~ "                        <td>&nbsp;Move Drill(s)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>R</strong></td>\n"
#~ "                        <td>&nbsp;Resize Drill(s)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>T</strong></td>\n"
#~ "                        <td>&nbsp;Add a new Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Del</strong></td>\n"
#~ "                        <td>&nbsp;Delete Drill(s)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Del</strong></td>\n"
#~ "                        <td>&nbsp;Alternate: Delete Tool(s)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ESC</strong></td>\n"
#~ "                        <td>&nbsp;Abort and return to Select</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>CTRL+S</strong></td>\n"
#~ "                        <td>&nbsp;Save Object and Exit Editor</td>\n"
#~ "                    </tr>\n"
#~ "                </tbody>\n"
#~ "            </table>\n"
#~ "                    "
#~ msgstr ""
#~ "<b>Editor Shortcut list</b><br>\n"
#~ "            <br>\n"
#~ "            <strong><span style=\"color:#0000ff\">GEOMETRY EDITOR</span></"
#~ "strong><br>\n"
#~ "    \n"
#~ "            <table border=\"0\" cellpadding=\"0\" cellspacing=\"0\" style="
#~ "\"width:283px\">\n"
#~ "                <tbody>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\" width=\"89\"><strong>A</"
#~ "strong></td>\n"
#~ "                        <td width=\"194\">&nbsp;Draw an Arc</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>B</strong></td>\n"
#~ "                        <td>&nbsp;Buffer Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>C</strong></td>\n"
#~ "                        <td>&nbsp;Copy Geo Item</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>E</strong></td>\n"
#~ "                        <td>&nbsp;Polygon Intersection Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>I</strong></td>\n"
#~ "                        <td>&nbsp;Paint Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>J</strong></td>\n"
#~ "                        <td>&nbsp;Jump to Location (x, y)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>K</strong></td>\n"
#~ "                        <td>&nbsp;Toggle Corner Snap</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>M</strong></td>\n"
#~ "                        <td>&nbsp;Move Geo Item</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>N</strong></td>\n"
#~ "                        <td>&nbsp;Draw a Polygon</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>O</strong></td>\n"
#~ "                        <td>&nbsp;Draw a Circle</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>P</strong></td>\n"
#~ "                        <td>&nbsp;Draw a Path</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>R</strong></td>\n"
#~ "                        <td>&nbsp;Draw Rectangle</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>S</strong></td>\n"
#~ "                        <td>&nbsp;Polygon Substraction Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>T</strong></td>\n"
#~ "                        <td>&nbsp;Add Text Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>U</strong></td>\n"
#~ "                        <td>&nbsp;Polygon Union Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>X</strong></td>\n"
#~ "                        <td>&nbsp;Flip shape on X axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Y</strong></td>\n"
#~ "                        <td>&nbsp;Flip shape on Y axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>SHIFT+X</strong></td>\n"
#~ "                        <td>&nbsp;Skew shape on X axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>SHIFT+Y</strong></td>\n"
#~ "                        <td>&nbsp;Skew shape on Y axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+R</strong></td>\n"
#~ "                        <td>&nbsp;Editor Transformation Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+X</strong></td>\n"
#~ "                        <td>&nbsp;Offset shape on X axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+Y</strong></td>\n"
#~ "                        <td>&nbsp;Offset shape on Y axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>CTRL+M</strong></td>\n"
#~ "                        <td>&nbsp;Measurement Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>CTRL+S</strong></td>\n"
#~ "                        <td>&nbsp;Save Object and Exit Editor</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>CTRL+X</strong></td>\n"
#~ "                        <td>&nbsp;Polygon Cut Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Space</strong></td>\n"
#~ "                        <td>&nbsp;Rotate Geometry</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ENTER</strong></td>\n"
#~ "                        <td>&nbsp;Finish drawing for certain tools</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ESC</strong></td>\n"
#~ "                        <td>&nbsp;Abort and return to Select</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Del</strong></td>\n"
#~ "                        <td>&nbsp;Delete Shape</td>\n"
#~ "                    </tr>\n"
#~ "                </tbody>\n"
#~ "            </table>\n"
#~ "            <br>\n"
#~ "            <br>\n"
#~ "            <strong><span style=\"color:#ff0000\">EXCELLON EDITOR</span></"
#~ "strong><br>\n"
#~ "            <table border=\"0\" cellpadding=\"0\" cellspacing=\"0\" style="
#~ "\"width:283px\">\n"
#~ "                <tbody>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\" width=\"89\"><strong>A</"
#~ "strong></td>\n"
#~ "                        <td width=\"194\">&nbsp;Add Drill Array</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>C</strong></td>\n"
#~ "                        <td>&nbsp;Copy Drill(s)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>D</strong></td>\n"
#~ "                        <td>&nbsp;Add Drill</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>J</strong></td>\n"
#~ "                        <td>&nbsp;Jump to Location (x, y)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>M</strong></td>\n"
#~ "                        <td>&nbsp;Move Drill(s)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>R</strong></td>\n"
#~ "                        <td>&nbsp;Resize Drill(s)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>T</strong></td>\n"
#~ "                        <td>&nbsp;Add a new Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Del</strong></td>\n"
#~ "                        <td>&nbsp;Delete Drill(s)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Del</strong></td>\n"
#~ "                        <td>&nbsp;Alternate: Delete Tool(s)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ESC</strong></td>\n"
#~ "                        <td>&nbsp;Abort and return to Select</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>CTRL+S</strong></td>\n"
#~ "                        <td>&nbsp;Save Object and Exit Editor</td>\n"
#~ "                    </tr>\n"
#~ "                </tbody>\n"
#~ "            </table>\n"
#~ "                    "

#~ msgid "[ERROR_NOTCL]Could not load defaults file."
#~ msgstr "[ERROR_NOTCL]Could not load defaults file."

#~ msgid "[ERROR_NOTCL] Failed to parse project file: %s"
#~ msgstr "[ERROR_NOTCL] Failed to parse project file: %s"

#~ msgid "[ERROR_NOTCL]Wrong value format entered, use a number."
#~ msgstr "[ERROR_NOTCL]Wrong value format entered, use a number."

#~ msgid ""
#~ "[ERROR_NOTCL] The aperture scale factor value is missing or wrong format."
#~ msgstr ""
#~ "[ERROR_NOTCL] The aperture scale factor value is missing or wrong format."

#~ msgid "[ERROR_NOTCL] The aperture buffer value is missing or wrong format."
#~ msgstr "[ERROR_NOTCL] The aperture buffer value is missing or wrong format."

#~ msgid "[ERROR_NOTCL]Cancelled. Empty file, it has no geometry..."
#~ msgstr "[ERROR_NOTCL]Cancelled. Empty file, it has no geometry..."

#~ msgid "[WARNING_NOTCL]Export Machine Code cancelled ..."
#~ msgstr "[WARNING_NOTCL]Export Machine Code cancelled ..."

#~ msgid "[success] GUI settings deleted ..."
#~ msgstr "[success] GUI settings deleted ..."

#~ msgid "Scale Factor:"
#~ msgstr "Scale Factor:"

#~ msgid "Buffer Factor:"
#~ msgstr "Buffer Factor:"

#~ msgid "<b>Generate new Gerber Object:</b>"
#~ msgstr "<b>Generate new Gerber Object:</b>"

#~ msgid "Will generate a new Gerber object from the changed apertures."
#~ msgstr "Will generate a new Gerber object from the changed apertures."

#~ msgid ""
#~ "Will generate a new Gerber object from the changed apertures.\n"
#~ "This new object can then be isolated etc."
#~ msgstr ""
#~ "Will generate a new Gerber object from the changed apertures.\n"
#~ "This new object can then be isolated etc."

#~ msgid "[success]Flip on the Y axis done ..."
#~ msgstr "[success]Flip on the Y axis done ..."

#~ msgid "[success]Flip on the X axis done ..."
#~ msgstr "[success]Flip on the X axis done ..."

#~ msgid "[success]Skew on the %s axis done ..."
#~ msgstr "[success]Skew on the %s axis done ..."

#~ msgid "[success]Offset on the %s axis done ..."
#~ msgstr "[success]Offset on the %s axis done ..."

#~ msgid ""
#~ "How much (fraction) of the tool width to overlap each tool pass.\n"
#~ "Example:\n"
#~ "A value here of 0.25 means 25\\% from the tool diameter found above.\n"
#~ "\n"
#~ "Adjust the value starting with lower values\n"
#~ "and increasing it if areas that should be painted are still \n"
#~ "not painted.\n"
#~ "Lower values = faster processing, faster execution on PCB.\n"
#~ "Higher values = slow processing and slow execution on CNC\n"
#~ "due of too many paths."
#~ msgstr ""
#~ "How much (fraction) of the tool width to overlap each tool pass.\n"
#~ "Example:\n"
#~ "A value here of 0.25 means 25\\% from the tool diameter found above.\n"
#~ "\n"
#~ "Adjust the value starting with lower values\n"
#~ "and increasing it if areas that should be painted are still \n"
#~ "not painted.\n"
#~ "Lower values = faster processing, faster execution on PCB.\n"
#~ "Higher values = slow processing and slow execution on CNC\n"
#~ "due of too many paths."

#~| msgid "z_toolchange = Z coord for Toolchange"
#~ msgid "z_cut = Z coord for Toolchange"
#~ msgstr "z_cut = Z coord for Toolchange"

#~| msgid "z_toolchange = Z coord for Toolchange"
#~ msgid "z_move = Z coord for Toolchange"
#~ msgstr "z_move = Z coord for Toolchange"

#~ msgid "%s/Project_%s"
#~ msgstr "%s/Project_%s"

#~ msgid "tool_tab"
#~ msgstr "tool_tab"