FlatCAM/locale/en/LC_MESSAGES/strings.po

# SOME DESCRIPTIVE TITLE.
# Copyright (C) YEAR ORGANIZATION
# FIRST AUTHOR <EMAIL@ADDRESS>, YEAR.
#
msgid ""
msgstr ""
"Project-Id-Version: \n"
"POT-Creation-Date: 2019-10-15 02:32+0300\n"
"PO-Revision-Date: 2019-10-15 02:32+0300\n"
"Last-Translator: \n"
"Language-Team: \n"
"Language: en\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Generated-By: pygettext.py 1.5\n"
"X-Generator: Poedit 2.2.3\n"
"Plural-Forms: nplurals=2; plural=(n != 1);\n"
"X-Poedit-Basepath: ../../..\n"
"X-Poedit-SearchPath-0: .\n"
"X-Poedit-SearchPathExcluded-0: build\n"
"X-Poedit-SearchPathExcluded-1: doc\n"
"X-Poedit-SearchPathExcluded-2: tests\n"

#: FlatCAMApp.py:409
msgid "FlatCAM is initializing ..."
msgstr "FlatCAM is initializing ..."

#: FlatCAMApp.py:1358
msgid "Could not find the Language files. The App strings are missing."
msgstr "Could not find the Language files. The App strings are missing."

#: FlatCAMApp.py:1759
msgid ""
"FlatCAM is initializing ...\n"
"Canvas initialization started."
msgstr ""
"FlatCAM is initializing ...\n"
"Canvas initialization started."

#: FlatCAMApp.py:1775
msgid ""
"FlatCAM is initializing ...\n"
"Canvas initialization started.\n"
"Canvas initialization finished in"
msgstr ""
"FlatCAM is initializing ...\n"
"Canvas initialization started.\n"
"Canvas initialization finished in"

#: FlatCAMApp.py:1981
msgid "Detachable Tabs"
msgstr "Detachable Tabs"

#: FlatCAMApp.py:2481
msgid ""
"Type >help< to get started\n"
"\n"
msgstr ""
"Type >help< to get started\n"
"\n"

#: FlatCAMApp.py:2706 FlatCAMApp.py:8804
msgid "New Project - Not saved"
msgstr "New Project - Not saved"

#: FlatCAMApp.py:2780 FlatCAMApp.py:8862 FlatCAMApp.py:8898 FlatCAMApp.py:8938
#: FlatCAMApp.py:9702 FlatCAMApp.py:10956 FlatCAMApp.py:11009
msgid ""
"Canvas initialization started.\n"
"Canvas initialization finished in"
msgstr ""
"Canvas initialization started.\n"
"Canvas initialization finished in"

#: FlatCAMApp.py:2782
msgid "Executing Tcl Script ..."
msgstr "Executing Tcl Script ..."

#: FlatCAMApp.py:2835 ObjectCollection.py:81 flatcamTools/ToolImage.py:219
#: flatcamTools/ToolPcbWizard.py:300 flatcamTools/ToolPcbWizard.py:323
msgid "Open cancelled."
msgstr "Open cancelled."

#: FlatCAMApp.py:2851
msgid "Open Config file failed."
msgstr "Open Config file failed."

#: FlatCAMApp.py:2866
msgid "Open Script file failed."
msgstr "Open Script file failed."

#: FlatCAMApp.py:2892
msgid "Open Excellon file failed."
msgstr "Open Excellon file failed."

#: FlatCAMApp.py:2905
msgid "Open GCode file failed."
msgstr "Open GCode file failed."

#: FlatCAMApp.py:2918
msgid "Open Gerber file failed."
msgstr "Open Gerber file failed."

#: FlatCAMApp.py:3238
msgid "Select a Geometry, Gerber or Excellon Object to edit."
msgstr "Select a Geometry, Gerber or Excellon Object to edit."

#: FlatCAMApp.py:3252
msgid ""
"Simultanoeus editing of tools geometry in a MultiGeo Geometry is not "
"possible.\n"
"Edit only one geometry at a time."
msgstr ""
"Simultanoeus editing of tools geometry in a MultiGeo Geometry is not "
"possible.\n"
"Edit only one geometry at a time."

#: FlatCAMApp.py:3307
msgid "Editor is activated ..."
msgstr "Editor is activated ..."

#: FlatCAMApp.py:3325
msgid "Do you want to save the edited object?"
msgstr "Do you want to save the edited object?"

#: FlatCAMApp.py:3326 flatcamGUI/FlatCAMGUI.py:1914
msgid "Close Editor"
msgstr "Close Editor"

#: FlatCAMApp.py:3329 FlatCAMApp.py:5007 FlatCAMApp.py:7607 FlatCAMApp.py:8711
#: FlatCAMTranslation.py:97 FlatCAMTranslation.py:171
#: flatcamGUI/PreferencesUI.py:933
msgid "Yes"
msgstr "Yes"

#: FlatCAMApp.py:3330 FlatCAMApp.py:5008 FlatCAMApp.py:7608 FlatCAMApp.py:8712
#: FlatCAMTranslation.py:98 FlatCAMTranslation.py:172
#: flatcamGUI/PreferencesUI.py:934 flatcamGUI/PreferencesUI.py:3786
#: flatcamGUI/PreferencesUI.py:4178 flatcamTools/ToolNonCopperClear.py:171
#: flatcamTools/ToolPaint.py:144
msgid "No"
msgstr "No"

#: FlatCAMApp.py:3331 FlatCAMApp.py:5009 FlatCAMApp.py:5879 FlatCAMApp.py:7005
#: FlatCAMApp.py:8713
msgid "Cancel"
msgstr "Cancel"

#: FlatCAMApp.py:3359
msgid "Object empty after edit."
msgstr "Object empty after edit."

#: FlatCAMApp.py:3408 FlatCAMApp.py:3428 FlatCAMApp.py:3443
msgid "Select a Gerber, Geometry or Excellon Object to update."
msgstr "Select a Gerber, Geometry or Excellon Object to update."

#: FlatCAMApp.py:3412
msgid "is updated, returning to App..."
msgstr "is updated, returning to App..."

#: FlatCAMApp.py:3808 FlatCAMApp.py:3862 FlatCAMApp.py:4871
msgid "Could not load defaults file."
msgstr "Could not load defaults file."

#: FlatCAMApp.py:3821 FlatCAMApp.py:3871 FlatCAMApp.py:4881
msgid "Failed to parse defaults file."
msgstr "Failed to parse defaults file."

#: FlatCAMApp.py:3842 FlatCAMApp.py:3846
msgid "Import FlatCAM Preferences"
msgstr "Import FlatCAM Preferences"

#: FlatCAMApp.py:3853
msgid "FlatCAM preferences import cancelled."
msgstr "FlatCAM preferences import cancelled."

#: FlatCAMApp.py:3876
msgid "Imported Defaults from"
msgstr "Imported Defaults from"

#: FlatCAMApp.py:3896 FlatCAMApp.py:3901 flatcamGUI/FlatCAMGUI.py:3960
msgid "Export FlatCAM Preferences"
msgstr "Export FlatCAM Preferences"

#: FlatCAMApp.py:3909
msgid "FlatCAM preferences export cancelled."
msgstr "FlatCAM preferences export cancelled."

#: FlatCAMApp.py:3918 FlatCAMApp.py:9883 FlatCAMApp.py:10010
#: FlatCAMApp.py:10152 FlatCAMApp.py:10211 FlatCAMApp.py:10328
#: FlatCAMApp.py:10467 FlatCAMObj.py:6300
#: flatcamEditors/FlatCAMTextEditor.py:217 flatcamGUI/FlatCAMGUI.py:3977
#: flatcamTools/ToolSolderPaste.py:1453
msgid ""
"Permission denied, saving not possible.\n"
"Most likely another app is holding the file open and not accessible."
msgstr ""
"Permission denied, saving not possible.\n"
"Most likely another app is holding the file open and not accessible."

#: FlatCAMApp.py:3931
msgid "Could not load preferences file."
msgstr "Could not load preferences file."

#: FlatCAMApp.py:3951
msgid "Failed to write defaults to file."
msgstr "Failed to write defaults to file."

#: FlatCAMApp.py:3957
msgid "Exported preferences to"
msgstr "Exported preferences to"

#: FlatCAMApp.py:3974
msgid "FlatCAM Preferences Folder opened."
msgstr "FlatCAM Preferences Folder opened."

#: FlatCAMApp.py:4057
msgid "Failed to open recent files file for writing."
msgstr "Failed to open recent files file for writing."

#: FlatCAMApp.py:4068
msgid "Failed to open recent projects file for writing."
msgstr "Failed to open recent projects file for writing."

#: FlatCAMApp.py:4154 flatcamParsers/ParseExcellon.py:868
#: flatcamTools/ToolSolderPaste.py:1239
msgid "An internal error has ocurred. See shell.\n"
msgstr "An internal error has ocurred. See shell.\n"

#: FlatCAMApp.py:4155
#, python-brace-format
msgid ""
"Object ({kind}) failed because: {error} \n"
"\n"
msgstr ""
"Object ({kind}) failed because: {error} \n"
"\n"

#: FlatCAMApp.py:4176
msgid "Converting units to "
msgstr "Converting units to "

#: FlatCAMApp.py:4267
msgid ""
"#\n"
"# CREATE A NEW FLATCAM TCL SCRIPT\n"
"# TCL Tutorial here: https://www.tcl.tk/man/tcl8.5/tutorial/tcltutorial."
"html\n"
"#\n"
"\n"
"# FlatCAM commands list:\n"
"# AddCircle, AddPolygon, AddPolyline, AddRectangle, AlignDrill, "
"AlignDrillGrid, ClearShell, ClearCopper,\n"
"# Cncjob, Cutout, Delete, Drillcncjob, ExportGcode, ExportSVG, Exteriors, "
"GeoCutout, GeoUnion, GetNames,\n"
"# GetSys, ImportSvg, Interiors, Isolate, Follow, JoinExcellon, JoinGeometry, "
"ListSys, MillDrills,\n"
"# MillSlots, Mirror, New, NewGeometry, Offset, OpenExcellon, OpenGCode, "
"OpenGerber, OpenProject,\n"
"# Options, Paint, Panelize, Plot, SaveProject, SaveSys, Scale, SetActive, "
"SetSys, Skew, SubtractPoly,\n"
"# SubtractRectangle, Version, WriteGCode\n"
"#\n"
"\n"
msgstr ""
"#\n"
"# CREATE A NEW FLATCAM TCL SCRIPT\n"
"# TCL Tutorial here: https://www.tcl.tk/man/tcl8.5/tutorial/tcltutorial."
"html\n"
"#\n"
"\n"
"# FlatCAM commands list:\n"
"# AddCircle, AddPolygon, AddPolyline, AddRectangle, AlignDrill, "
"AlignDrillGrid, ClearShell, ClearCopper,\n"
"# Cncjob, Cutout, Delete, Drillcncjob, ExportGcode, ExportSVG, Exteriors, "
"GeoCutout, GeoUnion, GetNames,\n"
"# GetSys, ImportSvg, Interiors, Isolate, Follow, JoinExcellon, JoinGeometry, "
"ListSys, MillDrills,\n"
"# MillSlots, Mirror, New, NewGeometry, Offset, OpenExcellon, OpenGCode, "
"OpenGerber, OpenProject,\n"
"# Options, Paint, Panelize, Plot, SaveProject, SaveSys, Scale, SetActive, "
"SetSys, Skew, SubtractPoly,\n"
"# SubtractRectangle, Version, WriteGCode\n"
"#\n"
"\n"

#: FlatCAMApp.py:4329 FlatCAMApp.py:4332 FlatCAMApp.py:4335 FlatCAMApp.py:4338
#: FlatCAMApp.py:4341 FlatCAMApp.py:4344
#, python-brace-format
msgid ""
"[selected] {kind} created/selected: <span style=\"color:{color};\">{name}</"
"span>"
msgstr ""
"[selected] {kind} created/selected: <span style=\"color:{color};\">{name}</"
"span>"

#: FlatCAMApp.py:4359 FlatCAMApp.py:7085 FlatCAMObj.py:256 FlatCAMObj.py:271
#: FlatCAMObj.py:287 FlatCAMObj.py:367 flatcamTools/ToolMove.py:217
msgid "Plotting"
msgstr "Plotting"

#: FlatCAMApp.py:4453 flatcamGUI/FlatCAMGUI.py:452
msgid "About FlatCAM"
msgstr "About FlatCAM"

#: FlatCAMApp.py:4482
msgid "2D Computer-Aided Printed Circuit Board Manufacturing"
msgstr "2D Computer-Aided Printed Circuit Board Manufacturing"

#: FlatCAMApp.py:4483
msgid "Development"
msgstr "Development"

#: FlatCAMApp.py:4484
msgid "DOWNLOAD"
msgstr "DOWNLOAD"

#: FlatCAMApp.py:4485
msgid "Issue tracker"
msgstr "Issue tracker"

#: FlatCAMApp.py:4489 FlatCAMApp.py:4801 flatcamGUI/FlatCAMGUI.py:3780
msgid "Close"
msgstr "Close"

#: FlatCAMApp.py:4504
msgid ""
"\n"
"Licensed under the MIT license:\n"
"http://www.opensource.org/licenses/mit-license.php\n"
"\n"
"Permission is hereby granted, free of charge, to any person obtaining a "
"copy\n"
"of this software and associated documentation files (the \"Software\"), to "
"deal\n"
"in the Software without restriction, including without limitation the "
"rights\n"
"to use, copy, modify, merge, publish, distribute, sublicense, and/or sell\n"
"copies of the Software, and to permit persons to whom the Software is\n"
"furnished to do so, subject to the following conditions:\n"
"\n"
"The above copyright notice and this permission notice shall be included in\n"
"all copies or substantial portions of the Software.\n"
"\n"
"THE SOFTWARE IS PROVIDED \"AS IS\", WITHOUT WARRANTY OF ANY KIND, EXPRESS "
"OR\n"
"IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,\n"
"FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE\n"
"AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER\n"
"LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING "
"FROM,\n"
"OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN\n"
"THE SOFTWARE."
msgstr ""
"\n"
"Licensed under the MIT license:\n"
"http://www.opensource.org/licenses/mit-license.php\n"
"\n"
"Permission is hereby granted, free of charge, to any person obtaining a "
"copy\n"
"of this software and associated documentation files (the \"Software\"), to "
"deal\n"
"in the Software without restriction, including without limitation the "
"rights\n"
"to use, copy, modify, merge, publish, distribute, sublicense, and/or sell\n"
"copies of the Software, and to permit persons to whom the Software is\n"
"furnished to do so, subject to the following conditions:\n"
"\n"
"The above copyright notice and this permission notice shall be included in\n"
"all copies or substantial portions of the Software.\n"
"\n"
"THE SOFTWARE IS PROVIDED \"AS IS\", WITHOUT WARRANTY OF ANY KIND, EXPRESS "
"OR\n"
"IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,\n"
"FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE\n"
"AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER\n"
"LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING "
"FROM,\n"
"OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN\n"
"THE SOFTWARE."

#: FlatCAMApp.py:4530
msgid ""
"Some of the icons used are from the following sources: <BR><div>Icons made "
"by <a href=\"https://www.flaticon.com/authors/freepik\" title=\"Freepik"
"\">Freepik</a> from <a href=\"https://www.flaticon.com/\"             title="
"\"Flaticon\">www.flaticon.com</a></div><br>Icons by <a target=\"_blank\" "
"href=\"https://icons8.com\">Icons8</a>"
msgstr ""
"Some of the icons used are from the following sources: <BR><div>Icons made "
"by <a href=\"https://www.flaticon.com/authors/freepik\" title=\"Freepik"
"\">Freepik</a> from <a href=\"https://www.flaticon.com/\"             title="
"\"Flaticon\">www.flaticon.com</a></div><br>Icons by <a target=\"_blank\" "
"href=\"https://icons8.com\">Icons8</a>"

#: FlatCAMApp.py:4561
msgid "Splash"
msgstr "Splash"

#: FlatCAMApp.py:4567
msgid "Programmers"
msgstr "Programmers"

#: FlatCAMApp.py:4573
msgid "Translators"
msgstr "Translators"

#: FlatCAMApp.py:4579
msgid "License"
msgstr "License"

#: FlatCAMApp.py:4585
msgid "Attributions"
msgstr "Attributions"

#: FlatCAMApp.py:4606
msgid "Programmer"
msgstr "Programmer"

#: FlatCAMApp.py:4607
msgid "Status"
msgstr "Status"

#: FlatCAMApp.py:4609
msgid "Program Author"
msgstr "Program Author"

#: FlatCAMApp.py:4613
msgid "Maintainer >= 2019"
msgstr "Maintainer >= 2019"

#: FlatCAMApp.py:4668
msgid "Language"
msgstr "Language"

#: FlatCAMApp.py:4669
msgid "Translator"
msgstr "Translator"

#: FlatCAMApp.py:4670
msgid "E-mail"
msgstr "E-mail"

#: FlatCAMApp.py:4773 FlatCAMApp.py:4781 FlatCAMApp.py:7625
#: flatcamGUI/FlatCAMGUI.py:436
msgid "Bookmarks Manager"
msgstr "Bookmarks Manager"

#: FlatCAMApp.py:4792
msgid ""
"This entry will resolve to another website if:\n"
"\n"
"1. FlatCAM.org website is down\n"
"2. Someone forked FlatCAM project and wants to point\n"
"to his own website\n"
"\n"
"If you can't get any informations about FlatCAM beta\n"
"use the YouTube channel link from the Help menu."
msgstr ""

#: FlatCAMApp.py:4799
#, fuzzy
#| msgid "Alternate: Delete Tool"
msgid "Alternative website"
msgstr "Alternate: Delete Tool"

#: FlatCAMApp.py:5002 FlatCAMTranslation.py:166
msgid ""
"There are files/objects modified in FlatCAM. \n"
"Do you want to Save the project?"
msgstr ""
"There are files/objects modified in FlatCAM. \n"
"Do you want to Save the project?"

#: FlatCAMApp.py:5005 FlatCAMApp.py:8709 FlatCAMTranslation.py:169
msgid "Save changes"
msgstr "Save changes"

#: FlatCAMApp.py:5235
msgid "Selected Excellon file extensions registered with FlatCAM."
msgstr "Selected Excellon file extensions registered with FlatCAM."

#: FlatCAMApp.py:5257
msgid "Selected GCode file extensions registered with FlatCAM."
msgstr "Selected GCode file extensions registered with FlatCAM."

#: FlatCAMApp.py:5279
msgid "Selected Gerber file extensions registered with FlatCAM."
msgstr "Selected Gerber file extensions registered with FlatCAM."

#: FlatCAMApp.py:5440 FlatCAMApp.py:5496 FlatCAMApp.py:5524
msgid "At least two objects are required for join. Objects currently selected"
msgstr "At least two objects are required for join. Objects currently selected"

#: FlatCAMApp.py:5449
msgid ""
"Failed join. The Geometry objects are of different types.\n"
"At least one is MultiGeo type and the other is SingleGeo type. A possibility "
"is to convert from one to another and retry joining \n"
"but in the case of converting from MultiGeo to SingleGeo, informations may "
"be lost and the result may not be what was expected. \n"
"Check the generated GCODE."
msgstr ""
"Failed join. The Geometry objects are of different types.\n"
"At least one is MultiGeo type and the other is SingleGeo type. A possibility "
"is to convert from one to another and retry joining \n"
"but in the case of converting from MultiGeo to SingleGeo, informations may "
"be lost and the result may not be what was expected. \n"
"Check the generated GCODE."

#: FlatCAMApp.py:5491
msgid "Failed. Excellon joining works only on Excellon objects."
msgstr "Failed. Excellon joining works only on Excellon objects."

#: FlatCAMApp.py:5519
msgid "Failed. Gerber joining works only on Gerber objects."
msgstr "Failed. Gerber joining works only on Gerber objects."

#: FlatCAMApp.py:5549 FlatCAMApp.py:5586
msgid "Failed. Select a Geometry Object and try again."
msgstr "Failed. Select a Geometry Object and try again."

#: FlatCAMApp.py:5554 FlatCAMApp.py:5591
msgid "Expected a FlatCAMGeometry, got"
msgstr "Expected a FlatCAMGeometry, got"

#: FlatCAMApp.py:5568
msgid "A Geometry object was converted to MultiGeo type."
msgstr "A Geometry object was converted to MultiGeo type."

#: FlatCAMApp.py:5606
msgid "A Geometry object was converted to SingleGeo type."
msgstr "A Geometry object was converted to SingleGeo type."

#: FlatCAMApp.py:5873
msgid "Toggle Units"
msgstr "Toggle Units"

#: FlatCAMApp.py:5875
msgid "Change project units ..."
msgstr "Change project units ..."

#: FlatCAMApp.py:5876
msgid ""
"Changing the units of the project causes all geometrical properties of all "
"objects to be scaled accordingly.\n"
"Continue?"
msgstr ""
"Changing the units of the project causes all geometrical properties of all "
"objects to be scaled accordingly.\n"
"Continue?"

#: FlatCAMApp.py:5878 FlatCAMApp.py:6928 FlatCAMApp.py:7004 FlatCAMApp.py:9022
#: FlatCAMApp.py:9036 FlatCAMApp.py:9384 FlatCAMApp.py:9395
msgid "Ok"
msgstr "Ok"

#: FlatCAMApp.py:5927
msgid "Converted units to"
msgstr "Converted units to"

#: FlatCAMApp.py:5939
msgid " Units conversion cancelled."
msgstr " Units conversion cancelled."

#: FlatCAMApp.py:6916 flatcamTools/ToolNonCopperClear.py:550
#: flatcamTools/ToolNonCopperClear.py:953 flatcamTools/ToolPaint.py:460
#: flatcamTools/ToolSolderPaste.py:472 flatcamTools/ToolSolderPaste.py:799
msgid "Please enter a tool diameter with non-zero value, in Float format."
msgstr "Please enter a tool diameter with non-zero value, in Float format."

#: FlatCAMApp.py:6921 flatcamTools/ToolNonCopperClear.py:554
#: flatcamTools/ToolPaint.py:464 flatcamTools/ToolSolderPaste.py:476
msgid "Adding Tool cancelled"
msgstr "Adding Tool cancelled"

#: FlatCAMApp.py:6924
msgid ""
"Adding Tool works only when Advanced is checked.\n"
"Go to Preferences -> General - Show Advanced Options."
msgstr ""
"Adding Tool works only when Advanced is checked.\n"
"Go to Preferences -> General - Show Advanced Options."

#: FlatCAMApp.py:6999
msgid "Delete objects"
msgstr "Delete objects"

#: FlatCAMApp.py:7002
msgid ""
"Are you sure you want to permanently delete\n"
"the selected objects?"
msgstr ""
"Are you sure you want to permanently delete\n"
"the selected objects?"

#: FlatCAMApp.py:7033
msgid "Object(s) deleted"
msgstr "Object(s) deleted"

#: FlatCAMApp.py:7037
msgid "Failed. No object(s) selected..."
msgstr "Failed. No object(s) selected..."

#: FlatCAMApp.py:7039
msgid "Save the work in Editor and try again ..."
msgstr "Save the work in Editor and try again ..."

#: FlatCAMApp.py:7069
msgid "Object deleted"
msgstr "Object deleted"

#: FlatCAMApp.py:7096
msgid "Click to set the origin ..."
msgstr "Click to set the origin ..."

#: FlatCAMApp.py:7118
msgid "Setting Origin..."
msgstr "Setting Origin..."

#: FlatCAMApp.py:7130
msgid "Origin set"
msgstr "Origin set"

#: FlatCAMApp.py:7137
msgid "Origin coordinates specified but incomplete."
msgstr "Origin coordinates specified but incomplete."

#: FlatCAMApp.py:7195
msgid "Jump to ..."
msgstr "Jump to ..."

#: FlatCAMApp.py:7196
msgid "Enter the coordinates in format X,Y:"
msgstr "Enter the coordinates in format X,Y:"

#: FlatCAMApp.py:7204
msgid "Wrong coordinates. Enter coordinates in format: X,Y"
msgstr "Wrong coordinates. Enter coordinates in format: X,Y"

#: FlatCAMApp.py:7252 flatcamEditors/FlatCAMExcEditor.py:3486
#: flatcamEditors/FlatCAMExcEditor.py:3494
#: flatcamEditors/FlatCAMGeoEditor.py:3915
#: flatcamEditors/FlatCAMGeoEditor.py:3930
#: flatcamEditors/FlatCAMGrbEditor.py:1067
#: flatcamEditors/FlatCAMGrbEditor.py:1171
#: flatcamEditors/FlatCAMGrbEditor.py:1445
#: flatcamEditors/FlatCAMGrbEditor.py:1703
#: flatcamEditors/FlatCAMGrbEditor.py:4302
#: flatcamEditors/FlatCAMGrbEditor.py:4317 flatcamGUI/FlatCAMGUI.py:2757
#: flatcamGUI/FlatCAMGUI.py:2769
msgid "Done."
msgstr "Done."

#: FlatCAMApp.py:7396 FlatCAMApp.py:7464
msgid "No object is selected. Select an object and try again."
msgstr "No object is selected. Select an object and try again."

#: FlatCAMApp.py:7484
msgid ""
"Aborting. The current task will be gracefully closed as soon as possible..."
msgstr ""
"Aborting. The current task will be gracefully closed as soon as possible..."

#: FlatCAMApp.py:7490
msgid "The current task was gracefully closed on user request..."
msgstr "The current task was gracefully closed on user request..."

#: FlatCAMApp.py:7507 FlatCAMApp.py:7571
msgid "Preferences"
msgstr "Preferences"

#: FlatCAMApp.py:7567
msgid "Preferences edited but not saved."
msgstr "Preferences edited but not saved."

#: FlatCAMApp.py:7602
msgid ""
"One or more values are changed.\n"
"Do you want to save the Preferences?"
msgstr ""
"One or more values are changed.\n"
"Do you want to save the Preferences?"

#: FlatCAMApp.py:7604 flatcamGUI/FlatCAMGUI.py:210
#: flatcamGUI/FlatCAMGUI.py:1087
msgid "Save Preferences"
msgstr "Save Preferences"

#: FlatCAMApp.py:7617
msgid "Preferences saved."
msgstr "Preferences saved."

#: FlatCAMApp.py:7622 FlatCAMApp.py:9610 FlatCAMApp.py:10962 FlatCAMObj.py:6058
#: flatcamTools/ToolSolderPaste.py:1329
msgid "Code Editor"
msgstr "Code Editor"

#: FlatCAMApp.py:7640
msgid "No object selected to Flip on Y axis."
msgstr "No object selected to Flip on Y axis."

#: FlatCAMApp.py:7666
msgid "Flip on Y axis done."
msgstr "Flip on Y axis done."

#: FlatCAMApp.py:7669 FlatCAMApp.py:7712
#: flatcamEditors/FlatCAMGrbEditor.py:5758
msgid "Flip action was not executed."
msgstr "Flip action was not executed."

#: FlatCAMApp.py:7683
msgid "No object selected to Flip on X axis."
msgstr "No object selected to Flip on X axis."

#: FlatCAMApp.py:7709
msgid "Flip on X axis done."
msgstr "Flip on X axis done."

#: FlatCAMApp.py:7726
msgid "No object selected to Rotate."
msgstr "No object selected to Rotate."

#: FlatCAMApp.py:7729 FlatCAMApp.py:7777 FlatCAMApp.py:7810
msgid "Transform"
msgstr "Transform"

#: FlatCAMApp.py:7729 FlatCAMApp.py:7777 FlatCAMApp.py:7810
msgid "Enter the Angle value:"
msgstr "Enter the Angle value:"

#: FlatCAMApp.py:7760
msgid "Rotation done."
msgstr "Rotation done."

#: FlatCAMApp.py:7763
msgid "Rotation movement was not executed."
msgstr "Rotation movement was not executed."

#: FlatCAMApp.py:7775
msgid "No object selected to Skew/Shear on X axis."
msgstr "No object selected to Skew/Shear on X axis."

#: FlatCAMApp.py:7797
msgid "Skew on X axis done."
msgstr "Skew on X axis done."

#: FlatCAMApp.py:7808
msgid "No object selected to Skew/Shear on Y axis."
msgstr "No object selected to Skew/Shear on Y axis."

#: FlatCAMApp.py:7830
msgid "Skew on Y axis done."
msgstr "Skew on Y axis done."

#: FlatCAMApp.py:7999 flatcamGUI/FlatCAMGUI.py:1417
msgid "Grid On/Off"
msgstr "Grid On/Off"

#: FlatCAMApp.py:8012 flatcamEditors/FlatCAMGeoEditor.py:942
#: flatcamEditors/FlatCAMGrbEditor.py:2496
#: flatcamEditors/FlatCAMGrbEditor.py:5268 flatcamGUI/ObjectUI.py:1204
#: flatcamTools/ToolDblSided.py:161 flatcamTools/ToolDblSided.py:208
#: flatcamTools/ToolNonCopperClear.py:245 flatcamTools/ToolPaint.py:171
#: flatcamTools/ToolSolderPaste.py:114 flatcamTools/ToolSolderPaste.py:501
#: flatcamTools/ToolTransform.py:307
msgid "Add"
msgstr "Add"

#: FlatCAMApp.py:8013 FlatCAMObj.py:3770
#: flatcamEditors/FlatCAMGrbEditor.py:2501
#: flatcamEditors/FlatCAMGrbEditor.py:2644 flatcamGUI/FlatCAMGUI.py:596
#: flatcamGUI/FlatCAMGUI.py:831 flatcamGUI/FlatCAMGUI.py:1816
#: flatcamGUI/FlatCAMGUI.py:1912 flatcamGUI/FlatCAMGUI.py:2240
#: flatcamGUI/ObjectUI.py:1220 flatcamTools/ToolNonCopperClear.py:257
#: flatcamTools/ToolPaint.py:183 flatcamTools/ToolSolderPaste.py:120
#: flatcamTools/ToolSolderPaste.py:503
msgid "Delete"
msgstr "Delete"

#: FlatCAMApp.py:8026
msgid "New Grid ..."
msgstr "New Grid ..."

#: FlatCAMApp.py:8027
msgid "Enter a Grid Value:"
msgstr "Enter a Grid Value:"

#: FlatCAMApp.py:8035 FlatCAMApp.py:8062
msgid "Please enter a grid value with non-zero value, in Float format."
msgstr "Please enter a grid value with non-zero value, in Float format."

#: FlatCAMApp.py:8041
msgid "New Grid added"
msgstr "New Grid added"

#: FlatCAMApp.py:8044
msgid "Grid already exists"
msgstr "Grid already exists"

#: FlatCAMApp.py:8047
msgid "Adding New Grid cancelled"
msgstr "Adding New Grid cancelled"

#: FlatCAMApp.py:8069
msgid " Grid Value does not exist"
msgstr " Grid Value does not exist"

#: FlatCAMApp.py:8072
msgid "Grid Value deleted"
msgstr "Grid Value deleted"

#: FlatCAMApp.py:8075
msgid "Delete Grid value cancelled"
msgstr "Delete Grid value cancelled"

#: FlatCAMApp.py:8081
msgid "Key Shortcut List"
msgstr "Key Shortcut List"

#: FlatCAMApp.py:8115
msgid " No object selected to copy it's name"
msgstr " No object selected to copy it's name"

#: FlatCAMApp.py:8119
msgid "Name copied on clipboard ..."
msgstr "Name copied on clipboard ..."

#: FlatCAMApp.py:8325 flatcamEditors/FlatCAMGrbEditor.py:4234
msgid "Coordinates copied to clipboard."
msgstr "Coordinates copied to clipboard."

#: FlatCAMApp.py:8465 FlatCAMApp.py:8469 FlatCAMApp.py:8473 FlatCAMApp.py:8477
#: FlatCAMApp.py:8493 FlatCAMApp.py:8497 FlatCAMApp.py:8501 FlatCAMApp.py:8505
#: FlatCAMApp.py:8545 FlatCAMApp.py:8548 FlatCAMApp.py:8551 FlatCAMApp.py:8554
#: ObjectCollection.py:765 ObjectCollection.py:768 ObjectCollection.py:771
#: ObjectCollection.py:774 ObjectCollection.py:777 ObjectCollection.py:780
#, python-brace-format
msgid "[selected]<span style=\"color:{color};\">{name}</span> selected"
msgstr "[selected]<span style=\"color:{color};\">{name}</span> selected"

#: FlatCAMApp.py:8706
msgid ""
"There are files/objects opened in FlatCAM.\n"
"Creating a New project will delete them.\n"
"Do you want to Save the project?"
msgstr ""
"There are files/objects opened in FlatCAM.\n"
"Creating a New project will delete them.\n"
"Do you want to Save the project?"

#: FlatCAMApp.py:8728
msgid "New Project created"
msgstr "New Project created"

#: FlatCAMApp.py:8853 FlatCAMApp.py:8857 flatcamGUI/FlatCAMGUI.py:681
#: flatcamGUI/FlatCAMGUI.py:2105
msgid "Open Gerber"
msgstr "Open Gerber"

#: FlatCAMApp.py:8864
msgid "Opening Gerber file."
msgstr "Opening Gerber file."

#: FlatCAMApp.py:8870
msgid "Open Gerber cancelled."
msgstr "Open Gerber cancelled."

#: FlatCAMApp.py:8890 FlatCAMApp.py:8894 flatcamGUI/FlatCAMGUI.py:682
#: flatcamGUI/FlatCAMGUI.py:2106
msgid "Open Excellon"
msgstr "Open Excellon"

#: FlatCAMApp.py:8900
msgid "Opening Excellon file."
msgstr "Opening Excellon file."

#: FlatCAMApp.py:8906
msgid " Open Excellon cancelled."
msgstr " Open Excellon cancelled."

#: FlatCAMApp.py:8929 FlatCAMApp.py:8933
msgid "Open G-Code"
msgstr "Open G-Code"

#: FlatCAMApp.py:8940
msgid "Opening G-Code file."
msgstr "Opening G-Code file."

#: FlatCAMApp.py:8946
msgid "Open G-Code cancelled."
msgstr "Open G-Code cancelled."

#: FlatCAMApp.py:8963 FlatCAMApp.py:8966 flatcamGUI/FlatCAMGUI.py:1423
msgid "Open Project"
msgstr "Open Project"

#: FlatCAMApp.py:8975
msgid "Open Project cancelled."
msgstr "Open Project cancelled."

#: FlatCAMApp.py:8994 FlatCAMApp.py:8997
msgid "Open Configuration File"
msgstr "Open Configuration File"

#: FlatCAMApp.py:9002
msgid "Open Config cancelled."
msgstr "Open Config cancelled."

#: FlatCAMApp.py:9018 FlatCAMApp.py:9380
msgid "No object selected."
msgstr "No object selected."

#: FlatCAMApp.py:9019 FlatCAMApp.py:9381
msgid "Please Select a Geometry object to export"
msgstr "Please Select a Geometry object to export"

#: FlatCAMApp.py:9033
msgid "Only Geometry, Gerber and CNCJob objects can be used."
msgstr "Only Geometry, Gerber and CNCJob objects can be used."

#: FlatCAMApp.py:9046 FlatCAMApp.py:9050
msgid "Export SVG"
msgstr "Export SVG"

#: FlatCAMApp.py:9056
msgid " Export SVG cancelled."
msgstr " Export SVG cancelled."

#: FlatCAMApp.py:9077
msgid "Data must be a 3D array with last dimension 3 or 4"
msgstr "Data must be a 3D array with last dimension 3 or 4"

#: FlatCAMApp.py:9083 FlatCAMApp.py:9087
msgid "Export PNG Image"
msgstr "Export PNG Image"

#: FlatCAMApp.py:9092
msgid "Export PNG cancelled."
msgstr "Export PNG cancelled."

#: FlatCAMApp.py:9116
msgid "No object selected. Please select an Gerber object to export."
msgstr "No object selected. Please select an Gerber object to export."

#: FlatCAMApp.py:9122 FlatCAMApp.py:9342
msgid "Failed. Only Gerber objects can be saved as Gerber files..."
msgstr "Failed. Only Gerber objects can be saved as Gerber files..."

#: FlatCAMApp.py:9134
msgid "Save Gerber source file"
msgstr "Save Gerber source file"

#: FlatCAMApp.py:9140
msgid "Save Gerber source file cancelled."
msgstr "Save Gerber source file cancelled."

#: FlatCAMApp.py:9160
msgid "No object selected. Please select an Script object to export."
msgstr "No object selected. Please select an Script object to export."

#: FlatCAMApp.py:9166
msgid "Failed. Only Script objects can be saved as TCL Script files..."
msgstr "Failed. Only Script objects can be saved as TCL Script files..."

#: FlatCAMApp.py:9178
msgid "Save Script source file"
msgstr "Save Script source file"

#: FlatCAMApp.py:9184
msgid "Save Script source file cancelled."
msgstr "Save Script source file cancelled."

#: FlatCAMApp.py:9204
msgid "No object selected. Please select an Document object to export."
msgstr "No object selected. Please select an Document object to export."

#: FlatCAMApp.py:9210
msgid "Failed. Only Document objects can be saved as Document files..."
msgstr "Failed. Only Document objects can be saved as Document files..."

#: FlatCAMApp.py:9222
msgid "Save Document source file"
msgstr "Save Document source file"

#: FlatCAMApp.py:9228
msgid "Save Document source file cancelled."
msgstr "Save Document source file cancelled."

#: FlatCAMApp.py:9248
msgid "No object selected. Please select an Excellon object to export."
msgstr "No object selected. Please select an Excellon object to export."

#: FlatCAMApp.py:9254 FlatCAMApp.py:9298
msgid "Failed. Only Excellon objects can be saved as Excellon files..."
msgstr "Failed. Only Excellon objects can be saved as Excellon files..."

#: FlatCAMApp.py:9262 FlatCAMApp.py:9266
msgid "Save Excellon source file"
msgstr "Save Excellon source file"

#: FlatCAMApp.py:9272
msgid "Saving Excellon source file cancelled."
msgstr "Saving Excellon source file cancelled."

#: FlatCAMApp.py:9292
msgid "No object selected. Please Select an Excellon object to export."
msgstr "No object selected. Please Select an Excellon object to export."

#: FlatCAMApp.py:9306 FlatCAMApp.py:9310
msgid "Export Excellon"
msgstr "Export Excellon"

#: FlatCAMApp.py:9316
msgid "Export Excellon cancelled."
msgstr "Export Excellon cancelled."

#: FlatCAMApp.py:9336
msgid "No object selected. Please Select an Gerber object to export."
msgstr "No object selected. Please Select an Gerber object to export."

#: FlatCAMApp.py:9350 FlatCAMApp.py:9354
msgid "Export Gerber"
msgstr "Export Gerber"

#: FlatCAMApp.py:9360
msgid "Export Gerber cancelled."
msgstr "Export Gerber cancelled."

#: FlatCAMApp.py:9392
msgid "Only Geometry objects can be used."
msgstr "Only Geometry objects can be used."

#: FlatCAMApp.py:9406 FlatCAMApp.py:9410
msgid "Export DXF"
msgstr "Export DXF"

#: FlatCAMApp.py:9417
msgid "Export DXF cancelled."
msgstr "Export DXF cancelled."

#: FlatCAMApp.py:9437 FlatCAMApp.py:9440
msgid "Import SVG"
msgstr "Import SVG"

#: FlatCAMApp.py:9450
msgid "Open SVG cancelled."
msgstr "Open SVG cancelled."

#: FlatCAMApp.py:9469 FlatCAMApp.py:9473
msgid "Import DXF"
msgstr "Import DXF"

#: FlatCAMApp.py:9483
msgid "Open DXF cancelled."
msgstr "Open DXF cancelled."

#: FlatCAMApp.py:9521
msgid "Viewing the source code of the selected object."
msgstr "Viewing the source code of the selected object."

#: FlatCAMApp.py:9522 FlatCAMObj.py:6044
msgid "Loading..."
msgstr "Loading..."

#: FlatCAMApp.py:9529
msgid "Select an Gerber or Excellon file to view it's source file."
msgstr "Select an Gerber or Excellon file to view it's source file."

#: FlatCAMApp.py:9544
msgid "Source Editor"
msgstr "Source Editor"

#: FlatCAMApp.py:9577 FlatCAMApp.py:9584
msgid "There is no selected object for which to see it's source file code."
msgstr "There is no selected object for which to see it's source file code."

#: FlatCAMApp.py:9596
msgid "Failed to load the source code for the selected object"
msgstr "Failed to load the source code for the selected object"

#: FlatCAMApp.py:9635
msgid "New TCL script file created in Code Editor."
msgstr "New TCL script file created in Code Editor."

#: FlatCAMApp.py:9673 FlatCAMApp.py:9675
msgid "Open TCL script"
msgstr "Open TCL script"

#: FlatCAMApp.py:9680
msgid "Open TCL script cancelled."
msgstr "Open TCL script cancelled."

#: FlatCAMApp.py:9704
msgid "Executing FlatCAMScript file."
msgstr "Executing FlatCAMScript file."

#: FlatCAMApp.py:9711 FlatCAMApp.py:9714
msgid "Run TCL script"
msgstr "Run TCL script"

#: FlatCAMApp.py:9724
msgid "Run TCL script cancelled."
msgstr "Run TCL script cancelled."

#: FlatCAMApp.py:9740
msgid "TCL script file opened in Code Editor and executed."
msgstr "TCL script file opened in Code Editor and executed."

#: FlatCAMApp.py:9791 FlatCAMApp.py:9795
msgid "Save Project As ..."
msgstr "Save Project As ..."

#: FlatCAMApp.py:9792
#, python-brace-format
msgid "{l_save}/Project_{date}"
msgstr "{l_save}/Project_{date}"

#: FlatCAMApp.py:9801
msgid "Save Project cancelled."
msgstr "Save Project cancelled."

#: FlatCAMApp.py:9849
msgid "Exporting SVG"
msgstr "Exporting SVG"

#: FlatCAMApp.py:9891 FlatCAMApp.py:10018 FlatCAMApp.py:10161
msgid "SVG file exported to"
msgstr "SVG file exported to"

#: FlatCAMApp.py:9938 FlatCAMApp.py:10080 flatcamTools/ToolPanelize.py:396
msgid "No object Box. Using instead"
msgstr "No object Box. Using instead"

#: FlatCAMApp.py:10021 FlatCAMApp.py:10164
msgid "Generating Film ... Please wait."
msgstr "Generating Film ... Please wait."

#: FlatCAMApp.py:10336
msgid "Excellon file exported to"
msgstr "Excellon file exported to"

#: FlatCAMApp.py:10345
msgid "Exporting Excellon"
msgstr "Exporting Excellon"

#: FlatCAMApp.py:10351 FlatCAMApp.py:10359
msgid "Could not export Excellon file."
msgstr "Could not export Excellon file."

#: FlatCAMApp.py:10475
msgid "Gerber file exported to"
msgstr "Gerber file exported to"

#: FlatCAMApp.py:10483
msgid "Exporting Gerber"
msgstr "Exporting Gerber"

#: FlatCAMApp.py:10489 FlatCAMApp.py:10497
msgid "Could not export Gerber file."
msgstr "Could not export Gerber file."

#: FlatCAMApp.py:10542
msgid "DXF file exported to"
msgstr "DXF file exported to"

#: FlatCAMApp.py:10548
msgid "Exporting DXF"
msgstr "Exporting DXF"

#: FlatCAMApp.py:10554 FlatCAMApp.py:10562
msgid "Could not export DXF file."
msgstr "Could not export DXF file."

#: FlatCAMApp.py:10584 FlatCAMApp.py:10629 FlatCAMApp.py:10673
msgid ""
"Not supported type is picked as parameter. Only Geometry and Gerber are "
"supported"
msgstr ""
"Not supported type is picked as parameter. Only Geometry and Gerber are "
"supported"

#: FlatCAMApp.py:10594
msgid "Importing SVG"
msgstr "Importing SVG"

#: FlatCAMApp.py:10606 FlatCAMApp.py:10649 FlatCAMApp.py:10694
#: FlatCAMApp.py:10775 FlatCAMApp.py:10842 FlatCAMApp.py:10905
#: FlatCAMApp.py:10943 flatcamTools/ToolPDF.py:219
msgid "Opened"
msgstr "Opened"

#: FlatCAMApp.py:10638
msgid "Importing DXF"
msgstr "Importing DXF"

#: FlatCAMApp.py:10681
msgid "Importing Image"
msgstr "Importing Image"

#: FlatCAMApp.py:10724
msgid "Failed to open file"
msgstr "Failed to open file"

#: FlatCAMApp.py:10729
msgid "Failed to parse file"
msgstr "Failed to parse file"

#: FlatCAMApp.py:10736 FlatCAMApp.py:10810 FlatCAMObj.py:4750
#: flatcamEditors/FlatCAMGrbEditor.py:4046 flatcamTools/ToolPcbWizard.py:436
msgid "An internal error has occurred. See shell.\n"
msgstr "An internal error has occurred. See shell.\n"

#: FlatCAMApp.py:10746
msgid "Object is not Gerber file or empty. Aborting object creation."
msgstr "Object is not Gerber file or empty. Aborting object creation."

#: FlatCAMApp.py:10754
msgid "Opening Gerber"
msgstr "Opening Gerber"

#: FlatCAMApp.py:10765
msgid " Open Gerber failed. Probable not a Gerber file."
msgstr " Open Gerber failed. Probable not a Gerber file."

#: FlatCAMApp.py:10800 flatcamTools/ToolPcbWizard.py:426
msgid "This is not Excellon file."
msgstr "This is not Excellon file."

#: FlatCAMApp.py:10804
msgid "Cannot open file"
msgstr "Cannot open file"

#: FlatCAMApp.py:10824 flatcamTools/ToolPDF.py:269
#: flatcamTools/ToolPcbWizard.py:450
msgid "No geometry found in file"
msgstr "No geometry found in file"

#: FlatCAMApp.py:10827
msgid "Opening Excellon."
msgstr "Opening Excellon."

#: FlatCAMApp.py:10834
msgid "Open Excellon file failed. Probable not an Excellon file."
msgstr "Open Excellon file failed. Probable not an Excellon file."

#: FlatCAMApp.py:10865
#, fuzzy
#| msgid "Opening G-Code file."
msgid "Reading GCode file"
msgstr "Opening G-Code file."

#: FlatCAMApp.py:10872
msgid "Failed to open"
msgstr "Failed to open"

#: FlatCAMApp.py:10880
msgid "This is not GCODE"
msgstr "This is not GCODE"

#: FlatCAMApp.py:10885
msgid "Opening G-Code."
msgstr "Opening G-Code."

#: FlatCAMApp.py:10894
#, fuzzy
#| msgid ""
#| "Failed to create CNCJob Object. Probable not a GCode file.\n"
#| " Attempting to create a FlatCAM CNCJob Object from G-Code file failed "
#| "during processing"
msgid ""
"Failed to create CNCJob Object. Probable not a GCode file. Try to load it "
"from File menu.\n"
" Attempting to create a FlatCAM CNCJob Object from G-Code file failed during "
"processing"
msgstr ""
"Failed to create CNCJob Object. Probable not a GCode file.\n"
" Attempting to create a FlatCAM CNCJob Object from G-Code file failed during "
"processing"

#: FlatCAMApp.py:10919
msgid "Opening TCL Script..."
msgstr "Opening TCL Script..."

#: FlatCAMApp.py:10927
msgid "TCL script file opened in Code Editor."
msgstr "TCL script file opened in Code Editor."

#: FlatCAMApp.py:10930
msgid "Failed to open TCL Script."
msgstr "Failed to open TCL Script."

#: FlatCAMApp.py:10958
msgid "Opening FlatCAM Config file."
msgstr "Opening FlatCAM Config file."

#: FlatCAMApp.py:10980
msgid "Failed to open config file"
msgstr "Failed to open config file"

#: FlatCAMApp.py:11006
msgid "Loading Project ... Please Wait ..."
msgstr "Loading Project ... Please Wait ..."

#: FlatCAMApp.py:11011
msgid "Opening FlatCAM Project file."
msgstr "Opening FlatCAM Project file."

#: FlatCAMApp.py:11021 FlatCAMApp.py:11039
msgid "Failed to open project file"
msgstr "Failed to open project file"

#: FlatCAMApp.py:11073
msgid "Loading Project ... restoring"
msgstr "Loading Project ... restoring"

#: FlatCAMApp.py:11082
msgid "Project loaded from"
msgstr "Project loaded from"

#: FlatCAMApp.py:11145
msgid "Redrawing all objects"
msgstr "Redrawing all objects"

#: FlatCAMApp.py:11177
msgid "Available commands:\n"
msgstr "Available commands:\n"

#: FlatCAMApp.py:11179
msgid ""
"\n"
"\n"
"Type help <command_name> for usage.\n"
" Example: help open_gerber"
msgstr ""
"\n"
"\n"
"Type help <command_name> for usage.\n"
" Example: help open_gerber"

#: FlatCAMApp.py:11329
msgid "Shows list of commands."
msgstr "Shows list of commands."

#: FlatCAMApp.py:11391
msgid "Failed to load recent item list."
msgstr "Failed to load recent item list."

#: FlatCAMApp.py:11399
msgid "Failed to parse recent item list."
msgstr "Failed to parse recent item list."

#: FlatCAMApp.py:11410
msgid "Failed to load recent projects item list."
msgstr "Failed to load recent projects item list."

#: FlatCAMApp.py:11418
msgid "Failed to parse recent project item list."
msgstr "Failed to parse recent project item list."

#: FlatCAMApp.py:11477
msgid "Clear Recent projects"
msgstr "Clear Recent projects"

#: FlatCAMApp.py:11500
msgid "Clear Recent files"
msgstr "Clear Recent files"

#: FlatCAMApp.py:11517 flatcamGUI/FlatCAMGUI.py:1104
msgid "<b>Shortcut Key List</b>"
msgstr "<b>Shortcut Key List</b>"

#: FlatCAMApp.py:11591
msgid "Selected Tab - Choose an Item from Project Tab"
msgstr "Selected Tab - Choose an Item from Project Tab"

#: FlatCAMApp.py:11592
msgid "Details"
msgstr "Details"

#: FlatCAMApp.py:11594
msgid "The normal flow when working in FlatCAM is the following:"
msgstr "The normal flow when working in FlatCAM is the following:"

#: FlatCAMApp.py:11595
msgid ""
"Load/Import a Gerber, Excellon, Gcode, DXF, Raster Image or SVG file into "
"FlatCAM using either the toolbars, key shortcuts or even dragging and "
"dropping the files on the GUI."
msgstr ""
"Load/Import a Gerber, Excellon, Gcode, DXF, Raster Image or SVG file into "
"FlatCAM using either the toolbars, key shortcuts or even dragging and "
"dropping the files on the GUI."

#: FlatCAMApp.py:11598
msgid ""
"You can also load a FlatCAM project by double clicking on the project file, "
"drag and drop of the file into the FLATCAM GUI or through the menu (or "
"toolbar) actions offered within the app."
msgstr ""
"You can also load a FlatCAM project by double clicking on the project file, "
"drag and drop of the file into the FLATCAM GUI or through the menu (or "
"toolbar) actions offered within the app."

#: FlatCAMApp.py:11601
msgid ""
"Once an object is available in the Project Tab, by selecting it and then "
"focusing on SELECTED TAB (more simpler is to double click the object name in "
"the Project Tab, SELECTED TAB will be updated with the object properties "
"according to its kind: Gerber, Excellon, Geometry or CNCJob object."
msgstr ""
"Once an object is available in the Project Tab, by selecting it and then "
"focusing on SELECTED TAB (more simpler is to double click the object name in "
"the Project Tab, SELECTED TAB will be updated with the object properties "
"according to its kind: Gerber, Excellon, Geometry or CNCJob object."

#: FlatCAMApp.py:11605
msgid ""
"If the selection of the object is done on the canvas by single click "
"instead, and the SELECTED TAB is in focus, again the object properties will "
"be displayed into the Selected Tab. Alternatively, double clicking on the "
"object on the canvas will bring the SELECTED TAB and populate it even if it "
"was out of focus."
msgstr ""
"If the selection of the object is done on the canvas by single click "
"instead, and the SELECTED TAB is in focus, again the object properties will "
"be displayed into the Selected Tab. Alternatively, double clicking on the "
"object on the canvas will bring the SELECTED TAB and populate it even if it "
"was out of focus."

#: FlatCAMApp.py:11609
msgid ""
"You can change the parameters in this screen and the flow direction is like "
"this:"
msgstr ""
"You can change the parameters in this screen and the flow direction is like "
"this:"

#: FlatCAMApp.py:11610
msgid ""
"Gerber/Excellon Object --> Change Parameter --> Generate Geometry --> "
"Geometry Object --> Add tools (change param in Selected Tab) --> Generate "
"CNCJob --> CNCJob Object --> Verify GCode (through Edit CNC Code) and/or "
"append/prepend to GCode (again, done in SELECTED TAB) --> Save GCode."
msgstr ""
"Gerber/Excellon Object --> Change Parameter --> Generate Geometry --> "
"Geometry Object --> Add tools (change param in Selected Tab) --> Generate "
"CNCJob --> CNCJob Object --> Verify GCode (through Edit CNC Code) and/or "
"append/prepend to GCode (again, done in SELECTED TAB) --> Save GCode."

#: FlatCAMApp.py:11614
msgid ""
"A list of key shortcuts is available through an menu entry in Help --> "
"Shortcuts List or through its own key shortcut: <b>F3</b>."
msgstr ""
"A list of key shortcuts is available through an menu entry in Help --> "
"Shortcuts List or through its own key shortcut: <b>F3</b>."

#: FlatCAMApp.py:11675
msgid "Failed checking for latest version. Could not connect."
msgstr "Failed checking for latest version. Could not connect."

#: FlatCAMApp.py:11683
msgid "Could not parse information about latest version."
msgstr "Could not parse information about latest version."

#: FlatCAMApp.py:11694
msgid "FlatCAM is up to date!"
msgstr "FlatCAM is up to date!"

#: FlatCAMApp.py:11699
msgid "Newer Version Available"
msgstr "Newer Version Available"

#: FlatCAMApp.py:11700
msgid ""
"There is a newer version of FlatCAM available for download:\n"
"\n"
msgstr ""
"There is a newer version of FlatCAM available for download:\n"
"\n"

#: FlatCAMApp.py:11702
msgid "info"
msgstr "info"

#: FlatCAMApp.py:11781
msgid "All plots disabled."
msgstr "All plots disabled."

#: FlatCAMApp.py:11788
msgid "All non selected plots disabled."
msgstr "All non selected plots disabled."

#: FlatCAMApp.py:11795
msgid "All plots enabled."
msgstr "All plots enabled."

#: FlatCAMApp.py:11802
msgid "Selected plots enabled..."
msgstr "Selected plots enabled..."

#: FlatCAMApp.py:11811
msgid "Selected plots disabled..."
msgstr "Selected plots disabled..."

#: FlatCAMApp.py:11829
msgid "Enabling plots ..."
msgstr "Enabling plots ..."

#: FlatCAMApp.py:11868
msgid "Disabling plots ..."
msgstr "Disabling plots ..."

#: FlatCAMApp.py:11890
msgid "Working ..."
msgstr "Working ..."

#: FlatCAMApp.py:11929
msgid "Saving FlatCAM Project"
msgstr "Saving FlatCAM Project"

#: FlatCAMApp.py:11951 FlatCAMApp.py:11989
msgid "Project saved to"
msgstr "Project saved to"

#: FlatCAMApp.py:11971
msgid "Failed to verify project file"
msgstr "Failed to verify project file"

#: FlatCAMApp.py:11971 FlatCAMApp.py:11980 FlatCAMApp.py:11992
msgid "Retry to save it."
msgstr "Retry to save it."

#: FlatCAMApp.py:11980 FlatCAMApp.py:11992
msgid "Failed to parse saved project file"
msgstr "Failed to parse saved project file"

#: FlatCAMApp.py:12213
msgid "The user requested a graceful exit of the current task."
msgstr "The user requested a graceful exit of the current task."

#: FlatCAMObj.py:242
msgid "Name changed from"
msgstr "Name changed from"

#: FlatCAMObj.py:242
msgid "to"
msgstr "to"

#: FlatCAMObj.py:253
msgid "Offsetting..."
msgstr "Offsetting..."

#: FlatCAMObj.py:268
msgid "Scaling..."
msgstr "Scaling..."

#: FlatCAMObj.py:284
msgid "Skewing..."
msgstr "Skewing..."

#: FlatCAMObj.py:654 FlatCAMObj.py:2482 FlatCAMObj.py:3774
#: flatcamGUI/PreferencesUI.py:993 flatcamGUI/PreferencesUI.py:2072
msgid "Basic"
msgstr "Basic"

#: FlatCAMObj.py:676 FlatCAMObj.py:2494 FlatCAMObj.py:3794
#: flatcamGUI/PreferencesUI.py:994
msgid "Advanced"
msgstr "Advanced"

#: FlatCAMObj.py:892
msgid "Buffering solid geometry"
msgstr "Buffering solid geometry"

#: FlatCAMObj.py:895 camlib.py:986 flatcamGUI/PreferencesUI.py:1519
#: flatcamTools/ToolNonCopperClear.py:1581
#: flatcamTools/ToolNonCopperClear.py:1679
#: flatcamTools/ToolNonCopperClear.py:1691
#: flatcamTools/ToolNonCopperClear.py:1929
#: flatcamTools/ToolNonCopperClear.py:2025
#: flatcamTools/ToolNonCopperClear.py:2037
msgid "Buffering"
msgstr "Buffering"

#: FlatCAMObj.py:901
msgid "Done"
msgstr "Done"

#: FlatCAMObj.py:942 FlatCAMObj.py:958 FlatCAMObj.py:975
msgid "Isolating..."
msgstr "Isolating..."

#: FlatCAMObj.py:1179 FlatCAMObj.py:1307
#: flatcamTools/ToolNonCopperClear.py:1610
#: flatcamTools/ToolNonCopperClear.py:1953
msgid "Isolation geometry could not be generated."
msgstr "Isolation geometry could not be generated."

#: FlatCAMObj.py:1228 FlatCAMObj.py:3457 FlatCAMObj.py:3732 FlatCAMObj.py:4008
msgid "Rough"
msgstr "Rough"

#: FlatCAMObj.py:1253 FlatCAMObj.py:1330
msgid "Isolation geometry created"
msgstr "Isolation geometry created"

#: FlatCAMObj.py:1262 FlatCAMObj.py:1337
msgid "Subtracting Geo"
msgstr "Subtracting Geo"

#: FlatCAMObj.py:1555
msgid "Plotting Apertures"
msgstr "Plotting Apertures"

#: FlatCAMObj.py:2309 flatcamEditors/FlatCAMExcEditor.py:2319
msgid "Total Drills"
msgstr "Total Drills"

#: FlatCAMObj.py:2341 flatcamEditors/FlatCAMExcEditor.py:2351
msgid "Total Slots"
msgstr "Total Slots"

#: FlatCAMObj.py:2548 FlatCAMObj.py:3844 FlatCAMObj.py:4142 FlatCAMObj.py:4333
#: FlatCAMObj.py:4344 FlatCAMObj.py:4462 FlatCAMObj.py:4684 FlatCAMObj.py:4807
#: FlatCAMObj.py:4970 FlatCAMObj.py:5489
#: flatcamEditors/FlatCAMExcEditor.py:2426
#: flatcamEditors/FlatCAMGeoEditor.py:1082
#: flatcamEditors/FlatCAMGeoEditor.py:1119
#: flatcamEditors/FlatCAMGeoEditor.py:1140
#: flatcamEditors/FlatCAMGeoEditor.py:1161
#: flatcamEditors/FlatCAMGeoEditor.py:1198
#: flatcamEditors/FlatCAMGeoEditor.py:1230
#: flatcamEditors/FlatCAMGeoEditor.py:1251
#: flatcamEditors/FlatCAMGrbEditor.py:5417
#: flatcamEditors/FlatCAMGrbEditor.py:5460
#: flatcamEditors/FlatCAMGrbEditor.py:5487
#: flatcamEditors/FlatCAMGrbEditor.py:5514
#: flatcamEditors/FlatCAMGrbEditor.py:5555
#: flatcamEditors/FlatCAMGrbEditor.py:5593
#: flatcamEditors/FlatCAMGrbEditor.py:5619
#: flatcamTools/ToolNonCopperClear.py:942
#: flatcamTools/ToolNonCopperClear.py:1018
#: flatcamTools/ToolNonCopperClear.py:1417 flatcamTools/ToolPaint.py:792
#: flatcamTools/ToolPaint.py:985 flatcamTools/ToolPaint.py:1271
#: flatcamTools/ToolPaint.py:1548 flatcamTools/ToolPaint.py:2025
#: flatcamTools/ToolSolderPaste.py:789 flatcamTools/ToolSolderPaste.py:864
msgid "Wrong value format entered, use a number."
msgstr "Wrong value format entered, use a number."

#: FlatCAMObj.py:2802 FlatCAMObj.py:2894 FlatCAMObj.py:3015
msgid "Please select one or more tools from the list and try again."
msgstr "Please select one or more tools from the list and try again."

#: FlatCAMObj.py:2808
msgid "Milling tool for DRILLS is larger than hole size. Cancelled."
msgstr "Milling tool for DRILLS is larger than hole size. Cancelled."

#: FlatCAMObj.py:2823 FlatCAMObj.py:2916 FlatCAMObj.py:3034
msgid "Tool_nr"
msgstr "Tool_nr"

#: FlatCAMObj.py:2823 FlatCAMObj.py:2916 FlatCAMObj.py:3034
#: flatcamEditors/FlatCAMExcEditor.py:1500
#: flatcamEditors/FlatCAMExcEditor.py:2934 flatcamGUI/ObjectUI.py:708
#: flatcamTools/ToolNonCopperClear.py:107 flatcamTools/ToolPaint.py:106
#: flatcamTools/ToolPcbWizard.py:75 flatcamTools/ToolSolderPaste.py:80
msgid "Diameter"
msgstr "Diameter"

#: FlatCAMObj.py:2823 FlatCAMObj.py:2916 FlatCAMObj.py:3034
msgid "Drills_Nr"
msgstr "Drills_Nr"

#: FlatCAMObj.py:2823 FlatCAMObj.py:2916 FlatCAMObj.py:3034
msgid "Slots_Nr"
msgstr "Slots_Nr"

#: FlatCAMObj.py:2903
msgid "Milling tool for SLOTS is larger than hole size. Cancelled."
msgstr "Milling tool for SLOTS is larger than hole size. Cancelled."

#: FlatCAMObj.py:3075 FlatCAMObj.py:5183
msgid ""
"Wrong value format for self.defaults[\"z_pdepth\"] or self.options[\"z_pdepth"
"\"]"
msgstr ""
"Wrong value format for self.defaults[\"z_pdepth\"] or self.options[\"z_pdepth"
"\"]"

#: FlatCAMObj.py:3086 FlatCAMObj.py:5194
msgid ""
"Wrong value format for self.defaults[\"feedrate_probe\"] or self."
"options[\"feedrate_probe\"]"
msgstr ""
"Wrong value format for self.defaults[\"feedrate_probe\"] or self."
"options[\"feedrate_probe\"]"

#: FlatCAMObj.py:3116 FlatCAMObj.py:5069 FlatCAMObj.py:5075 FlatCAMObj.py:5229
msgid "Generating CNC Code"
msgstr "Generating CNC Code"

#: FlatCAMObj.py:3142 camlib.py:2403 camlib.py:3387
msgid ""
"The Toolchange X,Y field in Edit -> Preferences has to be in the format (x, "
"y) \n"
"but now there is only one value, not two. "
msgstr ""
"The Toolchange X,Y field in Edit -> Preferences has to be in the format (x, "
"y) \n"
"but now there is only one value, not two. "

#: FlatCAMObj.py:3457 FlatCAMObj.py:4384 FlatCAMObj.py:4385 FlatCAMObj.py:4394
msgid "Iso"
msgstr "Iso"

#: FlatCAMObj.py:3457
msgid "Finish"
msgstr "Finish"

#: FlatCAMObj.py:3768 flatcamGUI/FlatCAMGUI.py:595 flatcamGUI/FlatCAMGUI.py:829
#: flatcamGUI/FlatCAMGUI.py:1813 flatcamGUI/FlatCAMGUI.py:1911
#: flatcamGUI/FlatCAMGUI.py:2238 flatcamGUI/ObjectUI.py:1212
#: flatcamTools/ToolPanelize.py:498 flatcamTools/ToolPanelize.py:525
#: flatcamTools/ToolPanelize.py:625 flatcamTools/ToolPanelize.py:659
#: flatcamTools/ToolPanelize.py:724
msgid "Copy"
msgstr "Copy"

#: FlatCAMObj.py:3982
msgid "Please enter the desired tool diameter in Float format."
msgstr "Please enter the desired tool diameter in Float format."

#: FlatCAMObj.py:4053
msgid "Tool added in Tool Table."
msgstr "Tool added in Tool Table."

#: FlatCAMObj.py:4057
msgid "Default Tool added. Wrong value format entered."
msgstr "Default Tool added. Wrong value format entered."

#: FlatCAMObj.py:4090 FlatCAMObj.py:4099
msgid "Failed. Select a tool to copy."
msgstr "Failed. Select a tool to copy."

#: FlatCAMObj.py:4127
msgid "Tool was copied in Tool Table."
msgstr "Tool was copied in Tool Table."

#: FlatCAMObj.py:4157
msgid "Tool was edited in Tool Table."
msgstr "Tool was edited in Tool Table."

#: FlatCAMObj.py:4186 FlatCAMObj.py:4195
msgid "Failed. Select a tool to delete."
msgstr "Failed. Select a tool to delete."

#: FlatCAMObj.py:4218
msgid "Tool was deleted in Tool Table."
msgstr "Tool was deleted in Tool Table."

#: FlatCAMObj.py:4664
msgid "This Geometry can't be processed because it is"
msgstr "This Geometry can't be processed because it is"

#: FlatCAMObj.py:4666
msgid "geometry"
msgstr "geometry"

#: FlatCAMObj.py:4709
msgid "Failed. No tool selected in the tool table ..."
msgstr "Failed. No tool selected in the tool table ..."

#: FlatCAMObj.py:4812 FlatCAMObj.py:4976
msgid ""
"Tool Offset is selected in Tool Table but no value is provided.\n"
"Add a Tool Offset or change the Offset Type."
msgstr ""
"Tool Offset is selected in Tool Table but no value is provided.\n"
"Add a Tool Offset or change the Offset Type."

#: FlatCAMObj.py:4877 FlatCAMObj.py:5036
msgid "G-Code parsing in progress..."
msgstr "G-Code parsing in progress..."

#: FlatCAMObj.py:4879 FlatCAMObj.py:5038
msgid "G-Code parsing finished..."
msgstr "G-Code parsing finished..."

#: FlatCAMObj.py:4887
msgid "Finished G-Code processing"
msgstr "Finished G-Code processing"

#: FlatCAMObj.py:4889 FlatCAMObj.py:5050
msgid "G-Code processing failed with error"
msgstr "G-Code processing failed with error"

#: FlatCAMObj.py:4937 flatcamTools/ToolSolderPaste.py:1212
msgid "Cancelled. Empty file, it has no geometry"
msgstr "Cancelled. Empty file, it has no geometry"

#: FlatCAMObj.py:5048 FlatCAMObj.py:5222
msgid "Finished G-Code processing..."
msgstr "Finished G-Code processing..."

#: FlatCAMObj.py:5072 FlatCAMObj.py:5078 FlatCAMObj.py:5232
msgid "CNCjob created"
msgstr "CNCjob created"

#: FlatCAMObj.py:5264 FlatCAMObj.py:5274 flatcamParsers/ParseGerber.py:1649
#: flatcamParsers/ParseGerber.py:1659
msgid "Scale factor has to be a number: integer or float."
msgstr "Scale factor has to be a number: integer or float."

#: FlatCAMObj.py:5348
msgid "Geometry Scale done."
msgstr "Geometry Scale done."

#: FlatCAMObj.py:5365 flatcamParsers/ParseGerber.py:1774
msgid ""
"An (x,y) pair of values are needed. Probable you entered only one value in "
"the Offset field."
msgstr ""
"An (x,y) pair of values are needed. Probable you entered only one value in "
"the Offset field."

#: FlatCAMObj.py:5419
msgid "Geometry Offset done."
msgstr "Geometry Offset done."

#: FlatCAMObj.py:5448
msgid ""
"The Toolchange X,Y field in Edit -> Preferences has to be in the format (x, "
"y)\n"
"but now there is only one value, not two."
msgstr ""
"The Toolchange X,Y field in Edit -> Preferences has to be in the format (x, "
"y)\n"
"but now there is only one value, not two."

#: FlatCAMObj.py:5939 FlatCAMObj.py:6562 FlatCAMObj.py:6746
msgid "<span style=\"color:green;\"><b>Basic</b></span>"
msgstr "<span style=\"color:green;\"><b>Basic</b></span>"

#: FlatCAMObj.py:5945 FlatCAMObj.py:6566 FlatCAMObj.py:6750
msgid "<span style=\"color:red;\"><b>Advanced</b></span>"
msgstr "<span style=\"color:red;\"><b>Advanced</b></span>"

#: FlatCAMObj.py:5988
msgid "Plotting..."
msgstr "Plotting..."

#: FlatCAMObj.py:6012 FlatCAMObj.py:6017 flatcamTools/ToolSolderPaste.py:1418
msgid "Export Machine Code ..."
msgstr "Export Machine Code ..."

#: FlatCAMObj.py:6023 flatcamTools/ToolSolderPaste.py:1422
msgid "Export Machine Code cancelled ..."
msgstr "Export Machine Code cancelled ..."

#: FlatCAMObj.py:6041
msgid "Machine Code file saved to"
msgstr "Machine Code file saved to"

#: FlatCAMObj.py:6096
msgid "Loaded Machine Code into Code Editor"
msgstr "Loaded Machine Code into Code Editor"

#: FlatCAMObj.py:6211
msgid "This CNCJob object can't be processed because it is a"
msgstr "This CNCJob object can't be processed because it is a"

#: FlatCAMObj.py:6213
msgid "CNCJob object"
msgstr "CNCJob object"

#: FlatCAMObj.py:6265
msgid "G-code does not have a units code: either G20 or G21"
msgstr "G-code does not have a units code: either G20 or G21"

#: FlatCAMObj.py:6277
msgid "Cancelled. The Toolchange Custom code is enabled but it's empty."
msgstr "Cancelled. The Toolchange Custom code is enabled but it's empty."

#: FlatCAMObj.py:6283
msgid "Toolchange G-code was replaced by a custom code."
msgstr "Toolchange G-code was replaced by a custom code."

#: FlatCAMObj.py:6296 flatcamEditors/FlatCAMTextEditor.py:213
#: flatcamTools/ToolSolderPaste.py:1449
msgid "No such file or directory"
msgstr "No such file or directory"

#: FlatCAMObj.py:6310 flatcamEditors/FlatCAMTextEditor.py:225
msgid "Saved to"
msgstr "Saved to"

#: FlatCAMObj.py:6320 FlatCAMObj.py:6330
msgid ""
"The used postprocessor file has to have in it's name: 'toolchange_custom'"
msgstr ""
"The used postprocessor file has to have in it's name: 'toolchange_custom'"

#: FlatCAMObj.py:6334
msgid "There is no postprocessor file."
msgstr "There is no postprocessor file."

#: FlatCAMObj.py:6611
msgid "Script Editor"
msgstr "Script Editor"

#: FlatCAMObj.py:6850
msgid "Document Editor"
msgstr "Document Editor"

#: FlatCAMProcess.py:172
msgid "processes running."
msgstr "processes running."

#: FlatCAMTranslation.py:92
msgid "The application will restart."
msgstr "The application will restart."

#: FlatCAMTranslation.py:94
msgid "Are you sure do you want to change the current language to"
msgstr "Are you sure do you want to change the current language to"

#: FlatCAMTranslation.py:95
msgid "Apply Language ..."
msgstr "Apply Language ..."

#: ObjectCollection.py:441
#, python-brace-format
msgid "Object renamed from <b>{old}</b> to <b>{new}</b>"
msgstr "Object renamed from <b>{old}</b> to <b>{new}</b>"

#: ObjectCollection.py:811
msgid "Cause of error"
msgstr "Cause of error"

#: camlib.py:597
msgid "self.solid_geometry is neither BaseGeometry or list."
msgstr "self.solid_geometry is neither BaseGeometry or list."

#: camlib.py:976
msgid "Pass"
msgstr "Pass"

#: camlib.py:996
msgid "Get Exteriors"
msgstr "Get Exteriors"

#: camlib.py:999
msgid "Get Interiors"
msgstr "Get Interiors"

#: camlib.py:1965
msgid "Object was mirrored"
msgstr "Object was mirrored"

#: camlib.py:1968
msgid "Failed to mirror. No object selected"
msgstr "Failed to mirror. No object selected"

#: camlib.py:2037
msgid "Object was rotated"
msgstr "Object was rotated"

#: camlib.py:2040
msgid "Failed to rotate. No object selected"
msgstr "Failed to rotate. No object selected"

#: camlib.py:2108
msgid "Object was skewed"
msgstr "Object was skewed"

#: camlib.py:2111
msgid "Failed to skew. No object selected"
msgstr "Failed to skew. No object selected"

#: camlib.py:2308
msgid "There is no such parameter"
msgstr "There is no such parameter"

#: camlib.py:2380
msgid ""
"The Cut Z parameter has positive value. It is the depth value to drill into "
"material.\n"
"The Cut Z parameter needs to have a negative value, assuming it is a typo "
"therefore the app will convert the value to negative. Check the resulting "
"CNC code (Gcode etc)."
msgstr ""
"The Cut Z parameter has positive value. It is the depth value to drill into "
"material.\n"
"The Cut Z parameter needs to have a negative value, assuming it is a typo "
"therefore the app will convert the value to negative. Check the resulting "
"CNC code (Gcode etc)."

#: camlib.py:2388 camlib.py:3063 camlib.py:3413
msgid "The Cut Z parameter is zero. There will be no cut, skipping file"
msgstr "The Cut Z parameter is zero. There will be no cut, skipping file"

#: camlib.py:2440
msgid "Creating a list of points to drill..."
msgstr "Creating a list of points to drill..."

#: camlib.py:2523
msgid "Starting G-Code"
msgstr "Starting G-Code"

#: camlib.py:2621 camlib.py:2768 camlib.py:2873 camlib.py:3179 camlib.py:3527
msgid "Starting G-Code for tool with diameter"
msgstr "Starting G-Code for tool with diameter"

#: camlib.py:2678 camlib.py:2825 camlib.py:2931
msgid "G91 coordinates not implemented"
msgstr "G91 coordinates not implemented"

#: camlib.py:2684 camlib.py:2831 camlib.py:2937
msgid "The loaded Excellon file has no drills"
msgstr "The loaded Excellon file has no drills"

#: camlib.py:2959
msgid "Finished G-Code generation..."
msgstr "Finished G-Code generation..."

#: camlib.py:3036
msgid ""
"The Toolchange X,Y field in Edit -> Preferences has to be in the format (x, "
"y) \n"
"but now there is only one value, not two."
msgstr ""
"The Toolchange X,Y field in Edit -> Preferences has to be in the format (x, "
"y) \n"
"but now there is only one value, not two."

#: camlib.py:3049 camlib.py:3399
msgid ""
"Cut_Z parameter is None or zero. Most likely a bad combinations of other "
"parameters."
msgstr ""
"Cut_Z parameter is None or zero. Most likely a bad combinations of other "
"parameters."

#: camlib.py:3055 camlib.py:3405
msgid ""
"The Cut Z parameter has positive value. It is the depth value to cut into "
"material.\n"
"The Cut Z parameter needs to have a negative value, assuming it is a typo "
"therefore the app will convert the value to negative.Check the resulting CNC "
"code (Gcode etc)."
msgstr ""
"The Cut Z parameter has positive value. It is the depth value to cut into "
"material.\n"
"The Cut Z parameter needs to have a negative value, assuming it is a typo "
"therefore the app will convert the value to negative.Check the resulting CNC "
"code (Gcode etc)."

#: camlib.py:3073 camlib.py:3419
msgid "Travel Z parameter is None or zero."
msgstr "Travel Z parameter is None or zero."

#: camlib.py:3078 camlib.py:3424
msgid ""
"The Travel Z parameter has negative value. It is the height value to travel "
"between cuts.\n"
"The Z Travel parameter needs to have a positive value, assuming it is a typo "
"therefore the app will convert the value to positive.Check the resulting CNC "
"code (Gcode etc)."
msgstr ""
"The Travel Z parameter has negative value. It is the height value to travel "
"between cuts.\n"
"The Z Travel parameter needs to have a positive value, assuming it is a typo "
"therefore the app will convert the value to positive.Check the resulting CNC "
"code (Gcode etc)."

#: camlib.py:3086 camlib.py:3432
msgid "The Z Travel parameter is zero. This is dangerous, skipping file"
msgstr "The Z Travel parameter is zero. This is dangerous, skipping file"

#: camlib.py:3101 camlib.py:3451
msgid "Indexing geometry before generating G-Code..."
msgstr "Indexing geometry before generating G-Code..."

#: camlib.py:3162 camlib.py:3513
msgid "Starting G-Code..."
msgstr "Starting G-Code..."

#: camlib.py:3249 camlib.py:3597
msgid "Finished G-Code generation"
msgstr "Finished G-Code generation"

#: camlib.py:3251
msgid "paths traced"
msgstr "paths traced"

#: camlib.py:3287
msgid "Expected a Geometry, got"
msgstr "Expected a Geometry, got"

#: camlib.py:3294
msgid ""
"Trying to generate a CNC Job from a Geometry object without solid_geometry."
msgstr ""
"Trying to generate a CNC Job from a Geometry object without solid_geometry."

#: camlib.py:3334
msgid ""
"The Tool Offset value is too negative to use for the current_geometry.\n"
"Raise the value (in module) and try again."
msgstr ""
"The Tool Offset value is too negative to use for the current_geometry.\n"
"Raise the value (in module) and try again."

#: camlib.py:3599
msgid " paths traced."
msgstr " paths traced."

#: camlib.py:3628
msgid "There is no tool data in the SolderPaste geometry."
msgstr "There is no tool data in the SolderPaste geometry."

#: camlib.py:3715
msgid "Finished SolderPste G-Code generation"
msgstr "Finished SolderPste G-Code generation"

#: camlib.py:3717
msgid "paths traced."
msgstr "paths traced."

#: camlib.py:3971
msgid "Parsing GCode file. Number of lines"
msgstr ""

#: camlib.py:4061
#, fuzzy
#| msgid "Create Geometry for milling holes."
msgid "Creating Geometry from the parsed GCode file. "
msgstr "Create Geometry for milling holes."

#: camlib.py:4193 camlib.py:4477 camlib.py:4580 camlib.py:4627
msgid "G91 coordinates not implemented ..."
msgstr "G91 coordinates not implemented ..."

#: camlib.py:4324
msgid "Unifying Geometry from parsed Geometry segments"
msgstr ""

#: flatcamEditors/FlatCAMExcEditor.py:45 flatcamEditors/FlatCAMExcEditor.py:70
#: flatcamEditors/FlatCAMExcEditor.py:152
#: flatcamEditors/FlatCAMExcEditor.py:356
#: flatcamEditors/FlatCAMExcEditor.py:548
#: flatcamEditors/FlatCAMGrbEditor.py:238
#: flatcamEditors/FlatCAMGrbEditor.py:243
msgid "Click to place ..."
msgstr "Click to place ..."

#: flatcamEditors/FlatCAMExcEditor.py:54
msgid "To add a drill first select a tool"
msgstr "To add a drill first select a tool"

#: flatcamEditors/FlatCAMExcEditor.py:117
msgid "Done. Drill added."
msgstr "Done. Drill added."

#: flatcamEditors/FlatCAMExcEditor.py:160
msgid "To add an Drill Array first select a tool in Tool Table"
msgstr "To add an Drill Array first select a tool in Tool Table"

#: flatcamEditors/FlatCAMExcEditor.py:176
#: flatcamEditors/FlatCAMExcEditor.py:386
#: flatcamEditors/FlatCAMExcEditor.py:596
#: flatcamEditors/FlatCAMExcEditor.py:1098
#: flatcamEditors/FlatCAMExcEditor.py:1123
#: flatcamEditors/FlatCAMGrbEditor.py:462
#: flatcamEditors/FlatCAMGrbEditor.py:1877
#: flatcamEditors/FlatCAMGrbEditor.py:1905
msgid "Click on target location ..."
msgstr "Click on target location ..."

#: flatcamEditors/FlatCAMExcEditor.py:193
msgid "Click on the Drill Circular Array Start position"
msgstr "Click on the Drill Circular Array Start position"

#: flatcamEditors/FlatCAMExcEditor.py:215
#: flatcamEditors/FlatCAMExcEditor.py:635
#: flatcamEditors/FlatCAMGrbEditor.py:505
msgid "The value is not Float. Check for comma instead of dot separator."
msgstr "The value is not Float. Check for comma instead of dot separator."

#: flatcamEditors/FlatCAMExcEditor.py:219
msgid "The value is mistyped. Check the value"
msgstr "The value is mistyped. Check the value"

#: flatcamEditors/FlatCAMExcEditor.py:318
msgid "Too many drills for the selected spacing angle."
msgstr "Too many drills for the selected spacing angle."

#: flatcamEditors/FlatCAMExcEditor.py:336
msgid "Done. Drill Array added."
msgstr "Done. Drill Array added."

#: flatcamEditors/FlatCAMExcEditor.py:365
msgid "To add a slot first select a tool"
msgstr "To add a slot first select a tool"

#: flatcamEditors/FlatCAMExcEditor.py:423
#: flatcamEditors/FlatCAMExcEditor.py:430
#: flatcamEditors/FlatCAMExcEditor.py:701
#: flatcamEditors/FlatCAMExcEditor.py:708
msgid "Value is missing or wrong format. Add it and retry."
msgstr "Value is missing or wrong format. Add it and retry."

#: flatcamEditors/FlatCAMExcEditor.py:529
msgid "Done. Adding Slot completed."
msgstr "Done. Adding Slot completed."

#: flatcamEditors/FlatCAMExcEditor.py:556
msgid "To add an Slot Array first select a tool in Tool Table"
msgstr "To add an Slot Array first select a tool in Tool Table"

#: flatcamEditors/FlatCAMExcEditor.py:613
msgid "Click on the Slot Circular Array Start position"
msgstr "Click on the Slot Circular Array Start position"

#: flatcamEditors/FlatCAMExcEditor.py:639
#: flatcamEditors/FlatCAMGrbEditor.py:509
msgid "The value is mistyped. Check the value."
msgstr "The value is mistyped. Check the value."

#: flatcamEditors/FlatCAMExcEditor.py:818
msgid "Too many Slots for the selected spacing angle."
msgstr "Too many Slots for the selected spacing angle."

#: flatcamEditors/FlatCAMExcEditor.py:841
msgid "Done. Slot Array added."
msgstr "Done. Slot Array added."

#: flatcamEditors/FlatCAMExcEditor.py:858
msgid "Click on the Drill(s) to resize ..."
msgstr "Click on the Drill(s) to resize ..."

#: flatcamEditors/FlatCAMExcEditor.py:888
msgid "Resize drill(s) failed. Please enter a diameter for resize."
msgstr "Resize drill(s) failed. Please enter a diameter for resize."

#: flatcamEditors/FlatCAMExcEditor.py:978
#: flatcamEditors/FlatCAMExcEditor.py:1048 flatcamGUI/FlatCAMGUI.py:2778
#: flatcamGUI/FlatCAMGUI.py:2989 flatcamGUI/FlatCAMGUI.py:3206
msgid "Cancelled."
msgstr "Cancelled."

#: flatcamEditors/FlatCAMExcEditor.py:1069
msgid "Done. Drill/Slot Resize completed."
msgstr "Done. Drill/Slot Resize completed."

#: flatcamEditors/FlatCAMExcEditor.py:1072
msgid "Cancelled. No drills/slots selected for resize ..."
msgstr "Cancelled. No drills/slots selected for resize ..."

#: flatcamEditors/FlatCAMExcEditor.py:1100
#: flatcamEditors/FlatCAMGrbEditor.py:1879
msgid "Click on reference location ..."
msgstr "Click on reference location ..."

#: flatcamEditors/FlatCAMExcEditor.py:1156
msgid "Done. Drill(s) Move completed."
msgstr "Done. Drill(s) Move completed."

#: flatcamEditors/FlatCAMExcEditor.py:1254
msgid "Done. Drill(s) copied."
msgstr "Done. Drill(s) copied."

#: flatcamEditors/FlatCAMExcEditor.py:1473 flatcamGUI/PreferencesUI.py:2613
msgid "Excellon Editor"
msgstr "Excellon Editor"

#: flatcamEditors/FlatCAMExcEditor.py:1480
#: flatcamEditors/FlatCAMGrbEditor.py:2380
msgid "Name:"
msgstr "Name:"

#: flatcamEditors/FlatCAMExcEditor.py:1486 flatcamGUI/ObjectUI.py:688
#: flatcamGUI/ObjectUI.py:1066 flatcamTools/ToolNonCopperClear.py:96
#: flatcamTools/ToolPaint.py:95 flatcamTools/ToolSolderPaste.py:69
msgid "Tools Table"
msgstr "Tools Table"

#: flatcamEditors/FlatCAMExcEditor.py:1488 flatcamGUI/ObjectUI.py:690
msgid ""
"Tools in this Excellon object\n"
"when are used for drilling."
msgstr ""
"Tools in this Excellon object\n"
"when are used for drilling."

#: flatcamEditors/FlatCAMExcEditor.py:1508
msgid "Add/Delete Tool"
msgstr "Add/Delete Tool"

#: flatcamEditors/FlatCAMExcEditor.py:1510
msgid ""
"Add/Delete a tool to the tool list\n"
"for this Excellon object."
msgstr ""
"Add/Delete a tool to the tool list\n"
"for this Excellon object."

#: flatcamEditors/FlatCAMExcEditor.py:1518 flatcamGUI/ObjectUI.py:1187
#: flatcamTools/ToolNonCopperClear.py:212 flatcamTools/ToolPaint.py:159
msgid "Tool Dia"
msgstr "Tool Dia"

#: flatcamEditors/FlatCAMExcEditor.py:1520 flatcamGUI/ObjectUI.py:1190
#: flatcamGUI/PreferencesUI.py:2643
msgid "Diameter for the new tool"
msgstr "Diameter for the new tool"

#: flatcamEditors/FlatCAMExcEditor.py:1528
msgid "Add Tool"
msgstr "Add Tool"

#: flatcamEditors/FlatCAMExcEditor.py:1530
msgid ""
"Add a new tool to the tool list\n"
"with the diameter specified above."
msgstr ""
"Add a new tool to the tool list\n"
"with the diameter specified above."

#: flatcamEditors/FlatCAMExcEditor.py:1542
msgid "Delete Tool"
msgstr "Delete Tool"

#: flatcamEditors/FlatCAMExcEditor.py:1544
msgid ""
"Delete a tool in the tool list\n"
"by selecting a row in the tool table."
msgstr ""
"Delete a tool in the tool list\n"
"by selecting a row in the tool table."

#: flatcamEditors/FlatCAMExcEditor.py:1562 flatcamGUI/FlatCAMGUI.py:1694
msgid "Resize Drill(s)"
msgstr "Resize Drill(s)"

#: flatcamEditors/FlatCAMExcEditor.py:1564
msgid "Resize a drill or a selection of drills."
msgstr "Resize a drill or a selection of drills."

#: flatcamEditors/FlatCAMExcEditor.py:1571
msgid "Resize Dia"
msgstr "Resize Dia"

#: flatcamEditors/FlatCAMExcEditor.py:1573
msgid "Diameter to resize to."
msgstr "Diameter to resize to."

#: flatcamEditors/FlatCAMExcEditor.py:1581
msgid "Resize"
msgstr "Resize"

#: flatcamEditors/FlatCAMExcEditor.py:1583
msgid "Resize drill(s)"
msgstr "Resize drill(s)"

#: flatcamEditors/FlatCAMExcEditor.py:1608 flatcamGUI/FlatCAMGUI.py:1693
#: flatcamGUI/FlatCAMGUI.py:1903
msgid "Add Drill Array"
msgstr "Add Drill Array"

#: flatcamEditors/FlatCAMExcEditor.py:1610
msgid "Add an array of drills (linear or circular array)"
msgstr "Add an array of drills (linear or circular array)"

#: flatcamEditors/FlatCAMExcEditor.py:1616
msgid ""
"Select the type of drills array to create.\n"
"It can be Linear X(Y) or Circular"
msgstr ""
"Select the type of drills array to create.\n"
"It can be Linear X(Y) or Circular"

#: flatcamEditors/FlatCAMExcEditor.py:1619
#: flatcamEditors/FlatCAMExcEditor.py:1821
#: flatcamEditors/FlatCAMGrbEditor.py:2683
msgid "Linear"
msgstr "Linear"

#: flatcamEditors/FlatCAMExcEditor.py:1620
#: flatcamEditors/FlatCAMExcEditor.py:1822
#: flatcamEditors/FlatCAMGrbEditor.py:2684 flatcamGUI/PreferencesUI.py:3722
#: flatcamTools/ToolNonCopperClear.py:203
msgid "Circular"
msgstr "Circular"

#: flatcamEditors/FlatCAMExcEditor.py:1628 flatcamGUI/PreferencesUI.py:2654
msgid "Nr of drills"
msgstr "Nr of drills"

#: flatcamEditors/FlatCAMExcEditor.py:1629 flatcamGUI/PreferencesUI.py:2656
msgid "Specify how many drills to be in the array."
msgstr "Specify how many drills to be in the array."

#: flatcamEditors/FlatCAMExcEditor.py:1646
#: flatcamEditors/FlatCAMExcEditor.py:1693
#: flatcamEditors/FlatCAMExcEditor.py:1757
#: flatcamEditors/FlatCAMExcEditor.py:1848
#: flatcamEditors/FlatCAMExcEditor.py:1895
#: flatcamEditors/FlatCAMGrbEditor.py:1523
#: flatcamEditors/FlatCAMGrbEditor.py:2710
#: flatcamEditors/FlatCAMGrbEditor.py:2755 flatcamGUI/PreferencesUI.py:2764
msgid "Direction"
msgstr "Direction"

#: flatcamEditors/FlatCAMExcEditor.py:1648
#: flatcamEditors/FlatCAMExcEditor.py:1850
#: flatcamEditors/FlatCAMGrbEditor.py:2712 flatcamGUI/PreferencesUI.py:1755
#: flatcamGUI/PreferencesUI.py:2672 flatcamGUI/PreferencesUI.py:2820
msgid ""
"Direction on which the linear array is oriented:\n"
"- 'X' - horizontal axis \n"
"- 'Y' - vertical axis or \n"
"- 'Angle' - a custom angle for the array inclination"
msgstr ""
"Direction on which the linear array is oriented:\n"
"- 'X' - horizontal axis \n"
"- 'Y' - vertical axis or \n"
"- 'Angle' - a custom angle for the array inclination"

#: flatcamEditors/FlatCAMExcEditor.py:1655
#: flatcamEditors/FlatCAMExcEditor.py:1766
#: flatcamEditors/FlatCAMExcEditor.py:1857
#: flatcamEditors/FlatCAMGrbEditor.py:2719 flatcamGUI/PreferencesUI.py:1761
#: flatcamGUI/PreferencesUI.py:2678 flatcamGUI/PreferencesUI.py:2773
#: flatcamGUI/PreferencesUI.py:2826 flatcamGUI/PreferencesUI.py:4482
#: flatcamTools/ToolFilm.py:230
msgid "X"
msgstr "X"

#: flatcamEditors/FlatCAMExcEditor.py:1656
#: flatcamEditors/FlatCAMExcEditor.py:1767
#: flatcamEditors/FlatCAMExcEditor.py:1858
#: flatcamEditors/FlatCAMGrbEditor.py:2720 flatcamGUI/PreferencesUI.py:1762
#: flatcamGUI/PreferencesUI.py:2679 flatcamGUI/PreferencesUI.py:2774
#: flatcamGUI/PreferencesUI.py:2827 flatcamGUI/PreferencesUI.py:4483
#: flatcamTools/ToolFilm.py:231
msgid "Y"
msgstr "Y"

#: flatcamEditors/FlatCAMExcEditor.py:1657
#: flatcamEditors/FlatCAMExcEditor.py:1671
#: flatcamEditors/FlatCAMExcEditor.py:1705
#: flatcamEditors/FlatCAMExcEditor.py:1768
#: flatcamEditors/FlatCAMExcEditor.py:1772
#: flatcamEditors/FlatCAMExcEditor.py:1859
#: flatcamEditors/FlatCAMExcEditor.py:1873
#: flatcamEditors/FlatCAMExcEditor.py:1907
#: flatcamEditors/FlatCAMGrbEditor.py:2721
#: flatcamEditors/FlatCAMGrbEditor.py:2734
#: flatcamEditors/FlatCAMGrbEditor.py:2770 flatcamGUI/PreferencesUI.py:1763
#: flatcamGUI/PreferencesUI.py:1781 flatcamGUI/PreferencesUI.py:2680
#: flatcamGUI/PreferencesUI.py:2699 flatcamGUI/PreferencesUI.py:2775
#: flatcamGUI/PreferencesUI.py:2780 flatcamGUI/PreferencesUI.py:2828
#: flatcamGUI/PreferencesUI.py:2849 flatcamGUI/PreferencesUI.py:4774
#: flatcamTools/ToolDistance.py:59 flatcamTools/ToolDistanceMin.py:63
#: flatcamTools/ToolTransform.py:60
msgid "Angle"
msgstr "Angle"

#: flatcamEditors/FlatCAMExcEditor.py:1661
#: flatcamEditors/FlatCAMExcEditor.py:1863
#: flatcamEditors/FlatCAMGrbEditor.py:2725 flatcamGUI/PreferencesUI.py:1769
#: flatcamGUI/PreferencesUI.py:2686 flatcamGUI/PreferencesUI.py:2834
msgid "Pitch"
msgstr "Pitch"

#: flatcamEditors/FlatCAMExcEditor.py:1663
#: flatcamEditors/FlatCAMExcEditor.py:1865
#: flatcamEditors/FlatCAMGrbEditor.py:2727 flatcamGUI/PreferencesUI.py:1771
#: flatcamGUI/PreferencesUI.py:2688 flatcamGUI/PreferencesUI.py:2836
msgid "Pitch = Distance between elements of the array."
msgstr "Pitch = Distance between elements of the array."

#: flatcamEditors/FlatCAMExcEditor.py:1673
#: flatcamEditors/FlatCAMExcEditor.py:1875
#: flatcamEditors/FlatCAMGrbEditor.py:2736
msgid ""
"Angle at which the linear array is placed.\n"
"The precision is of max 2 decimals.\n"
"Min value is: -359.99 degrees.\n"
"Max value is:  360.00 degrees."
msgstr ""
"Angle at which the linear array is placed.\n"
"The precision is of max 2 decimals.\n"
"Min value is: -359.99 degrees.\n"
"Max value is:  360.00 degrees."

#: flatcamEditors/FlatCAMExcEditor.py:1694
#: flatcamEditors/FlatCAMExcEditor.py:1896
#: flatcamEditors/FlatCAMGrbEditor.py:2757
msgid ""
"Direction for circular array.Can be CW = clockwise or CCW = counter "
"clockwise."
msgstr ""
"Direction for circular array.Can be CW = clockwise or CCW = counter "
"clockwise."

#: flatcamEditors/FlatCAMExcEditor.py:1701
#: flatcamEditors/FlatCAMExcEditor.py:1903
#: flatcamEditors/FlatCAMGrbEditor.py:2765 flatcamGUI/PreferencesUI.py:1803
#: flatcamGUI/PreferencesUI.py:2428 flatcamGUI/PreferencesUI.py:2722
#: flatcamGUI/PreferencesUI.py:2872 flatcamGUI/PreferencesUI.py:3262
msgid "CW"
msgstr "CW"

#: flatcamEditors/FlatCAMExcEditor.py:1702
#: flatcamEditors/FlatCAMExcEditor.py:1904
#: flatcamEditors/FlatCAMGrbEditor.py:2766 flatcamGUI/PreferencesUI.py:1804
#: flatcamGUI/PreferencesUI.py:2429 flatcamGUI/PreferencesUI.py:2723
#: flatcamGUI/PreferencesUI.py:2873 flatcamGUI/PreferencesUI.py:3263
msgid "CCW"
msgstr "CCW"

#: flatcamEditors/FlatCAMExcEditor.py:1706
#: flatcamEditors/FlatCAMExcEditor.py:1908
#: flatcamEditors/FlatCAMGrbEditor.py:2772 flatcamGUI/PreferencesUI.py:1783
#: flatcamGUI/PreferencesUI.py:1812 flatcamGUI/PreferencesUI.py:2701
#: flatcamGUI/PreferencesUI.py:2731 flatcamGUI/PreferencesUI.py:2851
#: flatcamGUI/PreferencesUI.py:2881
msgid "Angle at which each element in circular array is placed."
msgstr "Angle at which each element in circular array is placed."

#: flatcamEditors/FlatCAMExcEditor.py:1736
msgid "Slot Parameters"
msgstr "Slot Parameters"

#: flatcamEditors/FlatCAMExcEditor.py:1738
msgid ""
"Parameters for adding a slot (hole with oval shape)\n"
"either single or as an part of an array."
msgstr ""
"Parameters for adding a slot (hole with oval shape)\n"
"either single or as an part of an array."

#: flatcamEditors/FlatCAMExcEditor.py:1747 flatcamGUI/PreferencesUI.py:2748
#: flatcamTools/ToolProperties.py:349
msgid "Length"
msgstr "Length"

#: flatcamEditors/FlatCAMExcEditor.py:1749 flatcamGUI/PreferencesUI.py:2750
msgid "Length = The length of the slot."
msgstr "Length = The length of the slot."

#: flatcamEditors/FlatCAMExcEditor.py:1759 flatcamGUI/PreferencesUI.py:2766
msgid ""
"Direction on which the slot is oriented:\n"
"- 'X' - horizontal axis \n"
"- 'Y' - vertical axis or \n"
"- 'Angle' - a custom angle for the slot inclination"
msgstr ""
"Direction on which the slot is oriented:\n"
"- 'X' - horizontal axis \n"
"- 'Y' - vertical axis or \n"
"- 'Angle' - a custom angle for the slot inclination"

#: flatcamEditors/FlatCAMExcEditor.py:1774 flatcamGUI/PreferencesUI.py:2782
msgid ""
"Angle at which the slot is placed.\n"
"The precision is of max 2 decimals.\n"
"Min value is: -359.99 degrees.\n"
"Max value is:  360.00 degrees."
msgstr ""
"Angle at which the slot is placed.\n"
"The precision is of max 2 decimals.\n"
"Min value is: -359.99 degrees.\n"
"Max value is:  360.00 degrees."

#: flatcamEditors/FlatCAMExcEditor.py:1807
msgid "Slot Array Parameters"
msgstr "Slot Array Parameters"

#: flatcamEditors/FlatCAMExcEditor.py:1809
msgid "Parameters for the array of slots (linear or circular array)"
msgstr "Parameters for the array of slots (linear or circular array)"

#: flatcamEditors/FlatCAMExcEditor.py:1818
msgid ""
"Select the type of slot array to create.\n"
"It can be Linear X(Y) or Circular"
msgstr ""
"Select the type of slot array to create.\n"
"It can be Linear X(Y) or Circular"

#: flatcamEditors/FlatCAMExcEditor.py:1830 flatcamGUI/PreferencesUI.py:2805
msgid "Nr of slots"
msgstr "Nr of slots"

#: flatcamEditors/FlatCAMExcEditor.py:1831 flatcamGUI/PreferencesUI.py:2807
msgid "Specify how many slots to be in the array."
msgstr "Specify how many slots to be in the array."

#: flatcamEditors/FlatCAMExcEditor.py:2438
msgid ""
"Tool already in the original or actual tool list.\n"
"Save and reedit Excellon if you need to add this tool. "
msgstr ""
"Tool already in the original or actual tool list.\n"
"Save and reedit Excellon if you need to add this tool. "

#: flatcamEditors/FlatCAMExcEditor.py:2447 flatcamGUI/FlatCAMGUI.py:3375
msgid "Added new tool with dia"
msgstr "Added new tool with dia"

#: flatcamEditors/FlatCAMExcEditor.py:2481
msgid "Select a tool in Tool Table"
msgstr "Select a tool in Tool Table"

#: flatcamEditors/FlatCAMExcEditor.py:2514
msgid "Deleted tool with diameter"
msgstr "Deleted tool with diameter"

#: flatcamEditors/FlatCAMExcEditor.py:2664
msgid "Done. Tool edit completed."
msgstr "Done. Tool edit completed."

#: flatcamEditors/FlatCAMExcEditor.py:3210
msgid "There are no Tools definitions in the file. Aborting Excellon creation."
msgstr ""
"There are no Tools definitions in the file. Aborting Excellon creation."

#: flatcamEditors/FlatCAMExcEditor.py:3214
msgid "An internal error has ocurred. See Shell.\n"
msgstr "An internal error has ocurred. See Shell.\n"

#: flatcamEditors/FlatCAMExcEditor.py:3220
msgid "Creating Excellon."
msgstr "Creating Excellon."

#: flatcamEditors/FlatCAMExcEditor.py:3234
msgid "Excellon editing finished."
msgstr "Excellon editing finished."

#: flatcamEditors/FlatCAMExcEditor.py:3252
msgid "Cancelled. There is no Tool/Drill selected"
msgstr "Cancelled. There is no Tool/Drill selected"

#: flatcamEditors/FlatCAMExcEditor.py:3860
msgid "Done. Drill(s) deleted."
msgstr "Done. Drill(s) deleted."

#: flatcamEditors/FlatCAMExcEditor.py:3932
#: flatcamEditors/FlatCAMExcEditor.py:3942
#: flatcamEditors/FlatCAMGrbEditor.py:4702
msgid "Click on the circular array Center position"
msgstr "Click on the circular array Center position"

#: flatcamEditors/FlatCAMGeoEditor.py:83
msgid "Buffer distance:"
msgstr "Buffer distance:"

#: flatcamEditors/FlatCAMGeoEditor.py:84
msgid "Buffer corner:"
msgstr "Buffer corner:"

#: flatcamEditors/FlatCAMGeoEditor.py:86
msgid ""
"There are 3 types of corners:\n"
" - 'Round': the corner is rounded for exterior buffer.\n"
" - 'Square:' the corner is met in a sharp angle for exterior buffer.\n"
" - 'Beveled:' the corner is a line that directly connects the features "
"meeting in the corner"
msgstr ""
"There are 3 types of corners:\n"
" - 'Round': the corner is rounded for exterior buffer.\n"
" - 'Square:' the corner is met in a sharp angle for exterior buffer.\n"
" - 'Beveled:' the corner is a line that directly connects the features "
"meeting in the corner"

#: flatcamEditors/FlatCAMGeoEditor.py:92
#: flatcamEditors/FlatCAMGrbEditor.py:2541
msgid "Round"
msgstr "Round"

#: flatcamEditors/FlatCAMGeoEditor.py:93
#: flatcamEditors/FlatCAMGrbEditor.py:2542
msgid "Square"
msgstr "Square"

#: flatcamEditors/FlatCAMGeoEditor.py:94
#: flatcamEditors/FlatCAMGrbEditor.py:2543
msgid "Beveled"
msgstr "Beveled"

#: flatcamEditors/FlatCAMGeoEditor.py:101
msgid "Buffer Interior"
msgstr "Buffer Interior"

#: flatcamEditors/FlatCAMGeoEditor.py:103
msgid "Buffer Exterior"
msgstr "Buffer Exterior"

#: flatcamEditors/FlatCAMGeoEditor.py:109
msgid "Full Buffer"
msgstr "Full Buffer"

#: flatcamEditors/FlatCAMGeoEditor.py:130
#: flatcamEditors/FlatCAMGeoEditor.py:2777 flatcamGUI/FlatCAMGUI.py:1603
#: flatcamGUI/PreferencesUI.py:1823
msgid "Buffer Tool"
msgstr "Buffer Tool"

#: flatcamEditors/FlatCAMGeoEditor.py:142
#: flatcamEditors/FlatCAMGeoEditor.py:159
#: flatcamEditors/FlatCAMGeoEditor.py:176
#: flatcamEditors/FlatCAMGeoEditor.py:2797
#: flatcamEditors/FlatCAMGeoEditor.py:2827
#: flatcamEditors/FlatCAMGeoEditor.py:2857
#: flatcamEditors/FlatCAMGrbEditor.py:4755
msgid "Buffer distance value is missing or wrong format. Add it and retry."
msgstr "Buffer distance value is missing or wrong format. Add it and retry."

#: flatcamEditors/FlatCAMGeoEditor.py:239
msgid "Font"
msgstr "Font"

#: flatcamEditors/FlatCAMGeoEditor.py:320 flatcamGUI/FlatCAMGUI.py:1864
msgid "Text"
msgstr "Text"

#: flatcamEditors/FlatCAMGeoEditor.py:346
msgid "Text Tool"
msgstr "Text Tool"

#: flatcamEditors/FlatCAMGeoEditor.py:404 flatcamGUI/FlatCAMGUI.py:909
msgid "Tool"
msgstr "Tool"

#: flatcamEditors/FlatCAMGeoEditor.py:435 flatcamGUI/ObjectUI.py:337
#: flatcamGUI/PreferencesUI.py:1304 flatcamGUI/PreferencesUI.py:2936
#: flatcamGUI/PreferencesUI.py:3981 flatcamGUI/PreferencesUI.py:4159
#: flatcamTools/ToolCutOut.py:101
msgid "Tool dia"
msgstr "Tool dia"

#: flatcamEditors/FlatCAMGeoEditor.py:437 flatcamGUI/PreferencesUI.py:4161
msgid ""
"Diameter of the tool to\n"
"be used in the operation."
msgstr ""
"Diameter of the tool to\n"
"be used in the operation."

#: flatcamEditors/FlatCAMGeoEditor.py:446 flatcamGUI/PreferencesUI.py:3818
#: flatcamGUI/PreferencesUI.py:4191 flatcamTools/ToolNonCopperClear.py:294
#: flatcamTools/ToolPaint.py:202
msgid "Overlap Rate"
msgstr "Overlap Rate"

#: flatcamEditors/FlatCAMGeoEditor.py:448 flatcamGUI/PreferencesUI.py:4193
#: flatcamTools/ToolPaint.py:204
#, python-format
msgid ""
"How much (fraction) of the tool width to overlap each tool pass.\n"
"Example:\n"
"A value here of 0.25 means 25%% from the tool diameter found above.\n"
"\n"
"Adjust the value starting with lower values\n"
"and increasing it if areas that should be painted are still \n"
"not painted.\n"
"Lower values = faster processing, faster execution on PCB.\n"
"Higher values = slow processing and slow execution on CNC\n"
"due of too many paths."
msgstr ""
"How much (fraction) of the tool width to overlap each tool pass.\n"
"Example:\n"
"A value here of 0.25 means 25%% from the tool diameter found above.\n"
"\n"
"Adjust the value starting with lower values\n"
"and increasing it if areas that should be painted are still \n"
"not painted.\n"
"Lower values = faster processing, faster execution on PCB.\n"
"Higher values = slow processing and slow execution on CNC\n"
"due of too many paths."

#: flatcamEditors/FlatCAMGeoEditor.py:464 flatcamGUI/PreferencesUI.py:3839
#: flatcamGUI/PreferencesUI.py:4009 flatcamGUI/PreferencesUI.py:4213
#: flatcamTools/ToolNonCopperClear.py:314 flatcamTools/ToolPaint.py:223
msgid "Margin"
msgstr "Margin"

#: flatcamEditors/FlatCAMGeoEditor.py:466 flatcamGUI/PreferencesUI.py:4215
#: flatcamTools/ToolPaint.py:225
msgid ""
"Distance by which to avoid\n"
"the edges of the polygon to\n"
"be painted."
msgstr ""
"Distance by which to avoid\n"
"the edges of the polygon to\n"
"be painted."

#: flatcamEditors/FlatCAMGeoEditor.py:475 flatcamGUI/PreferencesUI.py:3852
#: flatcamGUI/PreferencesUI.py:4228 flatcamTools/ToolNonCopperClear.py:325
#: flatcamTools/ToolPaint.py:236
msgid "Method"
msgstr "Method"

#: flatcamEditors/FlatCAMGeoEditor.py:477
msgid ""
"Algorithm to paint the polygon:<BR><B>Standard</B>: Fixed step inwards."
"<BR><B>Seed-based</B>: Outwards from seed."
msgstr ""
"Algorithm to paint the polygon:<BR><B>Standard</B>: Fixed step inwards."
"<BR><B>Seed-based</B>: Outwards from seed."

#: flatcamEditors/FlatCAMGeoEditor.py:483 flatcamGUI/PreferencesUI.py:3861
#: flatcamGUI/PreferencesUI.py:4237 flatcamTools/ToolNonCopperClear.py:334
#: flatcamTools/ToolPaint.py:245
msgid "Standard"
msgstr "Standard"

#: flatcamEditors/FlatCAMGeoEditor.py:484 flatcamGUI/PreferencesUI.py:3862
#: flatcamGUI/PreferencesUI.py:4238 flatcamTools/ToolNonCopperClear.py:335
#: flatcamTools/ToolPaint.py:246
msgid "Seed-based"
msgstr "Seed-based"

#: flatcamEditors/FlatCAMGeoEditor.py:485 flatcamGUI/PreferencesUI.py:3863
#: flatcamGUI/PreferencesUI.py:4239 flatcamTools/ToolNonCopperClear.py:336
#: flatcamTools/ToolPaint.py:247
msgid "Straight lines"
msgstr "Straight lines"

#: flatcamEditors/FlatCAMGeoEditor.py:490
msgid "Connect:"
msgstr "Connect:"

#: flatcamEditors/FlatCAMGeoEditor.py:492 flatcamGUI/PreferencesUI.py:3870
#: flatcamGUI/PreferencesUI.py:4246 flatcamTools/ToolNonCopperClear.py:343
#: flatcamTools/ToolPaint.py:254
msgid ""
"Draw lines between resulting\n"
"segments to minimize tool lifts."
msgstr ""
"Draw lines between resulting\n"
"segments to minimize tool lifts."

#: flatcamEditors/FlatCAMGeoEditor.py:499
msgid "Contour:"
msgstr "Contour:"

#: flatcamEditors/FlatCAMGeoEditor.py:501 flatcamGUI/PreferencesUI.py:3880
#: flatcamGUI/PreferencesUI.py:4256 flatcamTools/ToolNonCopperClear.py:352
#: flatcamTools/ToolPaint.py:263
msgid ""
"Cut around the perimeter of the polygon\n"
"to trim rough edges."
msgstr ""
"Cut around the perimeter of the polygon\n"
"to trim rough edges."

#: flatcamEditors/FlatCAMGeoEditor.py:512 flatcamGUI/FlatCAMGUI.py:1866
msgid "Paint"
msgstr "Paint"

#: flatcamEditors/FlatCAMGeoEditor.py:530 flatcamGUI/FlatCAMGUI.py:734
#: flatcamGUI/FlatCAMGUI.py:2148 flatcamGUI/ObjectUI.py:1565
#: flatcamTools/ToolPaint.py:24 flatcamTools/ToolPaint.py:491
msgid "Paint Tool"
msgstr "Paint Tool"

#: flatcamEditors/FlatCAMGeoEditor.py:567
msgid "Paint cancelled. No shape selected."
msgstr "Paint cancelled. No shape selected."

#: flatcamEditors/FlatCAMGeoEditor.py:579 flatcamTools/ToolDblSided.py:373
msgid "Tool diameter value is missing or wrong format. Add it and retry."
msgstr "Tool diameter value is missing or wrong format. Add it and retry."

#: flatcamEditors/FlatCAMGeoEditor.py:590
msgid "Overlap value is missing or wrong format. Add it and retry."
msgstr "Overlap value is missing or wrong format. Add it and retry."

#: flatcamEditors/FlatCAMGeoEditor.py:602
msgid "Margin distance value is missing or wrong format. Add it and retry."
msgstr "Margin distance value is missing or wrong format. Add it and retry."

#: flatcamEditors/FlatCAMGeoEditor.py:610
#: flatcamEditors/FlatCAMGeoEditor.py:2803
#: flatcamEditors/FlatCAMGeoEditor.py:2833
#: flatcamEditors/FlatCAMGeoEditor.py:2863 flatcamGUI/PreferencesUI.py:2932
#: flatcamTools/ToolProperties.py:112 flatcamTools/ToolProperties.py:138
msgid "Tools"
msgstr "Tools"

#: flatcamEditors/FlatCAMGeoEditor.py:621
#: flatcamEditors/FlatCAMGeoEditor.py:995
#: flatcamEditors/FlatCAMGrbEditor.py:4946
#: flatcamEditors/FlatCAMGrbEditor.py:5331 flatcamGUI/FlatCAMGUI.py:747
#: flatcamGUI/FlatCAMGUI.py:2161 flatcamTools/ToolTransform.py:369
msgid "Transform Tool"
msgstr "Transform Tool"

#: flatcamEditors/FlatCAMGeoEditor.py:622
#: flatcamEditors/FlatCAMGeoEditor.py:684
#: flatcamEditors/FlatCAMGrbEditor.py:4947
#: flatcamEditors/FlatCAMGrbEditor.py:5009 flatcamGUI/PreferencesUI.py:4766
#: flatcamTools/ToolTransform.py:23 flatcamTools/ToolTransform.py:77
msgid "Rotate"
msgstr "Rotate"

#: flatcamEditors/FlatCAMGeoEditor.py:623
#: flatcamEditors/FlatCAMGrbEditor.py:4948 flatcamTools/ToolTransform.py:24
msgid "Skew/Shear"
msgstr "Skew/Shear"

#: flatcamEditors/FlatCAMGeoEditor.py:624
#: flatcamEditors/FlatCAMGrbEditor.py:2588
#: flatcamEditors/FlatCAMGrbEditor.py:4949 flatcamGUI/FlatCAMGUI.py:822
#: flatcamGUI/FlatCAMGUI.py:1815 flatcamGUI/FlatCAMGUI.py:1893
#: flatcamGUI/FlatCAMGUI.py:2232 flatcamGUI/ObjectUI.py:87
#: flatcamGUI/ObjectUI.py:108 flatcamGUI/PreferencesUI.py:4816
#: flatcamTools/ToolTransform.py:25
msgid "Scale"
msgstr "Scale"

#: flatcamEditors/FlatCAMGeoEditor.py:625
#: flatcamEditors/FlatCAMGrbEditor.py:4950 flatcamTools/ToolTransform.py:26
msgid "Mirror (Flip)"
msgstr "Mirror (Flip)"

#: flatcamEditors/FlatCAMGeoEditor.py:626
#: flatcamEditors/FlatCAMGrbEditor.py:4951 flatcamGUI/ObjectUI.py:119
#: flatcamGUI/ObjectUI.py:134 flatcamGUI/ObjectUI.py:1099
#: flatcamGUI/ObjectUI.py:1711 flatcamGUI/PreferencesUI.py:3903
#: flatcamGUI/PreferencesUI.py:4863 flatcamTools/ToolNonCopperClear.py:374
#: flatcamTools/ToolTransform.py:27
msgid "Offset"
msgstr "Offset"

#: flatcamEditors/FlatCAMGeoEditor.py:638
#: flatcamEditors/FlatCAMGrbEditor.py:4963 flatcamGUI/FlatCAMGUI.py:694
#: flatcamGUI/FlatCAMGUI.py:2115
msgid "Editor"
msgstr "Editor"

#: flatcamEditors/FlatCAMGeoEditor.py:670
#: flatcamEditors/FlatCAMGrbEditor.py:4995
msgid "Angle:"
msgstr "Angle:"

#: flatcamEditors/FlatCAMGeoEditor.py:672
#: flatcamEditors/FlatCAMGrbEditor.py:4997 flatcamGUI/PreferencesUI.py:4776
#: flatcamTools/ToolTransform.py:62
msgid ""
"Angle for Rotation action, in degrees.\n"
"Float number between -360 and 359.\n"
"Positive numbers for CW motion.\n"
"Negative numbers for CCW motion."
msgstr ""
"Angle for Rotation action, in degrees.\n"
"Float number between -360 and 359.\n"
"Positive numbers for CW motion.\n"
"Negative numbers for CCW motion."

#: flatcamEditors/FlatCAMGeoEditor.py:686
#: flatcamEditors/FlatCAMGrbEditor.py:5011
msgid ""
"Rotate the selected shape(s).\n"
"The point of reference is the middle of\n"
"the bounding box for all selected shapes."
msgstr ""
"Rotate the selected shape(s).\n"
"The point of reference is the middle of\n"
"the bounding box for all selected shapes."

#: flatcamEditors/FlatCAMGeoEditor.py:709
#: flatcamEditors/FlatCAMGrbEditor.py:5034
msgid "Angle X:"
msgstr "Angle X:"

#: flatcamEditors/FlatCAMGeoEditor.py:711
#: flatcamEditors/FlatCAMGeoEditor.py:729
#: flatcamEditors/FlatCAMGrbEditor.py:5036
#: flatcamEditors/FlatCAMGrbEditor.py:5054 flatcamGUI/PreferencesUI.py:4795
#: flatcamGUI/PreferencesUI.py:4809
msgid ""
"Angle for Skew action, in degrees.\n"
"Float number between -360 and 359."
msgstr ""
"Angle for Skew action, in degrees.\n"
"Float number between -360 and 359."

#: flatcamEditors/FlatCAMGeoEditor.py:720
#: flatcamEditors/FlatCAMGrbEditor.py:5045 flatcamTools/ToolTransform.py:106
msgid "Skew X"
msgstr "Skew X"

#: flatcamEditors/FlatCAMGeoEditor.py:722
#: flatcamEditors/FlatCAMGeoEditor.py:740
#: flatcamEditors/FlatCAMGrbEditor.py:5047
#: flatcamEditors/FlatCAMGrbEditor.py:5065
msgid ""
"Skew/shear the selected shape(s).\n"
"The point of reference is the middle of\n"
"the bounding box for all selected shapes."
msgstr ""
"Skew/shear the selected shape(s).\n"
"The point of reference is the middle of\n"
"the bounding box for all selected shapes."

#: flatcamEditors/FlatCAMGeoEditor.py:727
#: flatcamEditors/FlatCAMGrbEditor.py:5052
msgid "Angle Y:"
msgstr "Angle Y:"

#: flatcamEditors/FlatCAMGeoEditor.py:738
#: flatcamEditors/FlatCAMGrbEditor.py:5063 flatcamTools/ToolTransform.py:128
msgid "Skew Y"
msgstr "Skew Y"

#: flatcamEditors/FlatCAMGeoEditor.py:766
#: flatcamEditors/FlatCAMGrbEditor.py:5091
msgid "Factor X:"
msgstr "Factor X:"

#: flatcamEditors/FlatCAMGeoEditor.py:768
#: flatcamEditors/FlatCAMGrbEditor.py:5093
msgid "Factor for Scale action over X axis."
msgstr "Factor for Scale action over X axis."

#: flatcamEditors/FlatCAMGeoEditor.py:776
#: flatcamEditors/FlatCAMGrbEditor.py:5101 flatcamTools/ToolTransform.py:155
msgid "Scale X"
msgstr "Scale X"

#: flatcamEditors/FlatCAMGeoEditor.py:778
#: flatcamEditors/FlatCAMGeoEditor.py:795
#: flatcamEditors/FlatCAMGrbEditor.py:5103
#: flatcamEditors/FlatCAMGrbEditor.py:5120
msgid ""
"Scale the selected shape(s).\n"
"The point of reference depends on \n"
"the Scale reference checkbox state."
msgstr ""
"Scale the selected shape(s).\n"
"The point of reference depends on \n"
"the Scale reference checkbox state."

#: flatcamEditors/FlatCAMGeoEditor.py:783
#: flatcamEditors/FlatCAMGrbEditor.py:5108
msgid "Factor Y:"
msgstr "Factor Y:"

#: flatcamEditors/FlatCAMGeoEditor.py:785
#: flatcamEditors/FlatCAMGrbEditor.py:5110
msgid "Factor for Scale action over Y axis."
msgstr "Factor for Scale action over Y axis."

#: flatcamEditors/FlatCAMGeoEditor.py:793
#: flatcamEditors/FlatCAMGrbEditor.py:5118 flatcamTools/ToolTransform.py:176
msgid "Scale Y"
msgstr "Scale Y"

#: flatcamEditors/FlatCAMGeoEditor.py:802
#: flatcamEditors/FlatCAMGrbEditor.py:5127 flatcamGUI/PreferencesUI.py:4845
#: flatcamTools/ToolTransform.py:189
msgid "Link"
msgstr "Link"

#: flatcamEditors/FlatCAMGeoEditor.py:804
#: flatcamEditors/FlatCAMGrbEditor.py:5129
msgid ""
"Scale the selected shape(s)\n"
"using the Scale Factor X for both axis."
msgstr ""
"Scale the selected shape(s)\n"
"using the Scale Factor X for both axis."

#: flatcamEditors/FlatCAMGeoEditor.py:810
#: flatcamEditors/FlatCAMGrbEditor.py:5135 flatcamGUI/PreferencesUI.py:4853
#: flatcamTools/ToolTransform.py:197
msgid "Scale Reference"
msgstr "Scale Reference"

#: flatcamEditors/FlatCAMGeoEditor.py:812
#: flatcamEditors/FlatCAMGrbEditor.py:5137
msgid ""
"Scale the selected shape(s)\n"
"using the origin reference when checked,\n"
"and the center of the biggest bounding box\n"
"of the selected shapes when unchecked."
msgstr ""
"Scale the selected shape(s)\n"
"using the origin reference when checked,\n"
"and the center of the biggest bounding box\n"
"of the selected shapes when unchecked."

#: flatcamEditors/FlatCAMGeoEditor.py:840
#: flatcamEditors/FlatCAMGrbEditor.py:5166
msgid "Value X:"
msgstr "Value X:"

#: flatcamEditors/FlatCAMGeoEditor.py:842
#: flatcamEditors/FlatCAMGrbEditor.py:5168
msgid "Value for Offset action on X axis."
msgstr "Value for Offset action on X axis."

#: flatcamEditors/FlatCAMGeoEditor.py:850
#: flatcamEditors/FlatCAMGrbEditor.py:5176 flatcamTools/ToolTransform.py:224
msgid "Offset X"
msgstr "Offset X"

#: flatcamEditors/FlatCAMGeoEditor.py:852
#: flatcamEditors/FlatCAMGeoEditor.py:870
#: flatcamEditors/FlatCAMGrbEditor.py:5178
#: flatcamEditors/FlatCAMGrbEditor.py:5196
msgid ""
"Offset the selected shape(s).\n"
"The point of reference is the middle of\n"
"the bounding box for all selected shapes.\n"
msgstr ""
"Offset the selected shape(s).\n"
"The point of reference is the middle of\n"
"the bounding box for all selected shapes.\n"

#: flatcamEditors/FlatCAMGeoEditor.py:858
#: flatcamEditors/FlatCAMGrbEditor.py:5184
msgid "Value Y:"
msgstr "Value Y:"

#: flatcamEditors/FlatCAMGeoEditor.py:860
#: flatcamEditors/FlatCAMGrbEditor.py:5186
msgid "Value for Offset action on Y axis."
msgstr "Value for Offset action on Y axis."

#: flatcamEditors/FlatCAMGeoEditor.py:868
#: flatcamEditors/FlatCAMGrbEditor.py:5194 flatcamTools/ToolTransform.py:245
msgid "Offset Y"
msgstr "Offset Y"

#: flatcamEditors/FlatCAMGeoEditor.py:899
#: flatcamEditors/FlatCAMGrbEditor.py:5225 flatcamTools/ToolTransform.py:263
msgid "Flip on X"
msgstr "Flip on X"

#: flatcamEditors/FlatCAMGeoEditor.py:901
#: flatcamEditors/FlatCAMGeoEditor.py:909
#: flatcamEditors/FlatCAMGrbEditor.py:5227
#: flatcamEditors/FlatCAMGrbEditor.py:5235
msgid ""
"Flip the selected shape(s) over the X axis.\n"
"Does not create a new shape."
msgstr ""
"Flip the selected shape(s) over the X axis.\n"
"Does not create a new shape."

#: flatcamEditors/FlatCAMGeoEditor.py:907
#: flatcamEditors/FlatCAMGrbEditor.py:5233 flatcamTools/ToolTransform.py:269
msgid "Flip on Y"
msgstr "Flip on Y"

#: flatcamEditors/FlatCAMGeoEditor.py:916
#: flatcamEditors/FlatCAMGrbEditor.py:5242
msgid "Ref Pt"
msgstr "Ref Pt"

#: flatcamEditors/FlatCAMGeoEditor.py:918
#: flatcamEditors/FlatCAMGrbEditor.py:5244
msgid ""
"Flip the selected shape(s)\n"
"around the point in Point Entry Field.\n"
"\n"
"The point coordinates can be captured by\n"
"left click on canvas together with pressing\n"
"SHIFT key. \n"
"Then click Add button to insert coordinates.\n"
"Or enter the coords in format (x, y) in the\n"
"Point Entry field and click Flip on X(Y)"
msgstr ""
"Flip the selected shape(s)\n"
"around the point in Point Entry Field.\n"
"\n"
"The point coordinates can be captured by\n"
"left click on canvas together with pressing\n"
"SHIFT key. \n"
"Then click Add button to insert coordinates.\n"
"Or enter the coords in format (x, y) in the\n"
"Point Entry field and click Flip on X(Y)"

#: flatcamEditors/FlatCAMGeoEditor.py:930
#: flatcamEditors/FlatCAMGrbEditor.py:5256
msgid "Point:"
msgstr "Point:"

#: flatcamEditors/FlatCAMGeoEditor.py:932
#: flatcamEditors/FlatCAMGrbEditor.py:5258 flatcamTools/ToolTransform.py:298
msgid ""
"Coordinates in format (x, y) used as reference for mirroring.\n"
"The 'x' in (x, y) will be used when using Flip on X and\n"
"the 'y' in (x, y) will be used when using Flip on Y."
msgstr ""
"Coordinates in format (x, y) used as reference for mirroring.\n"
"The 'x' in (x, y) will be used when using Flip on X and\n"
"the 'y' in (x, y) will be used when using Flip on Y."

#: flatcamEditors/FlatCAMGeoEditor.py:944
#: flatcamEditors/FlatCAMGrbEditor.py:5270 flatcamTools/ToolTransform.py:309
msgid ""
"The point coordinates can be captured by\n"
"left click on canvas together with pressing\n"
"SHIFT key. Then click Add button to insert."
msgstr ""
"The point coordinates can be captured by\n"
"left click on canvas together with pressing\n"
"SHIFT key. Then click Add button to insert."

#: flatcamEditors/FlatCAMGeoEditor.py:1060
#: flatcamEditors/FlatCAMGrbEditor.py:5396
msgid "Transformation cancelled. No shape selected."
msgstr "Transformation cancelled. No shape selected."

#: flatcamEditors/FlatCAMGeoEditor.py:1269
#: flatcamEditors/FlatCAMGrbEditor.py:5642
msgid "No shape selected. Please Select a shape to rotate!"
msgstr "No shape selected. Please Select a shape to rotate!"

#: flatcamEditors/FlatCAMGeoEditor.py:1272
#: flatcamEditors/FlatCAMGrbEditor.py:5645 flatcamTools/ToolTransform.py:543
msgid "Appying Rotate"
msgstr "Appying Rotate"

#: flatcamEditors/FlatCAMGeoEditor.py:1301
#: flatcamEditors/FlatCAMGrbEditor.py:5679
msgid "Done. Rotate completed."
msgstr "Done. Rotate completed."

#: flatcamEditors/FlatCAMGeoEditor.py:1307
msgid "Rotation action was not executed"
msgstr "Rotation action was not executed"

#: flatcamEditors/FlatCAMGeoEditor.py:1319
#: flatcamEditors/FlatCAMGrbEditor.py:5700
msgid "No shape selected. Please Select a shape to flip!"
msgstr "No shape selected. Please Select a shape to flip!"

#: flatcamEditors/FlatCAMGeoEditor.py:1322
#: flatcamEditors/FlatCAMGrbEditor.py:5703 flatcamTools/ToolTransform.py:596
msgid "Applying Flip"
msgstr "Applying Flip"

#: flatcamEditors/FlatCAMGeoEditor.py:1353
#: flatcamEditors/FlatCAMGrbEditor.py:5743 flatcamTools/ToolTransform.py:639
msgid "Flip on the Y axis done"
msgstr "Flip on the Y axis done"

#: flatcamEditors/FlatCAMGeoEditor.py:1357
#: flatcamEditors/FlatCAMGrbEditor.py:5752 flatcamTools/ToolTransform.py:649
msgid "Flip on the X axis done"
msgstr "Flip on the X axis done"

#: flatcamEditors/FlatCAMGeoEditor.py:1368
msgid "Flip action was not executed"
msgstr "Flip action was not executed"

#: flatcamEditors/FlatCAMGeoEditor.py:1378
#: flatcamEditors/FlatCAMGrbEditor.py:5774
msgid "No shape selected. Please Select a shape to shear/skew!"
msgstr "No shape selected. Please Select a shape to shear/skew!"

#: flatcamEditors/FlatCAMGeoEditor.py:1381
#: flatcamEditors/FlatCAMGrbEditor.py:5777 flatcamTools/ToolTransform.py:674
msgid "Applying Skew"
msgstr "Applying Skew"

#: flatcamEditors/FlatCAMGeoEditor.py:1407
#: flatcamEditors/FlatCAMGrbEditor.py:5814
msgid "Skew on the X axis done"
msgstr "Skew on the X axis done"

#: flatcamEditors/FlatCAMGeoEditor.py:1410
#: flatcamEditors/FlatCAMGrbEditor.py:5817
msgid "Skew on the Y axis done"
msgstr "Skew on the Y axis done"

#: flatcamEditors/FlatCAMGeoEditor.py:1415
msgid "Skew action was not executed"
msgstr "Skew action was not executed"

#: flatcamEditors/FlatCAMGeoEditor.py:1427
#: flatcamEditors/FlatCAMGrbEditor.py:5842
msgid "No shape selected. Please Select a shape to scale!"
msgstr "No shape selected. Please Select a shape to scale!"

#: flatcamEditors/FlatCAMGeoEditor.py:1430
#: flatcamEditors/FlatCAMGrbEditor.py:5845 flatcamTools/ToolTransform.py:726
msgid "Applying Scale"
msgstr "Applying Scale"

#: flatcamEditors/FlatCAMGeoEditor.py:1465
#: flatcamEditors/FlatCAMGrbEditor.py:5885
msgid "Scale on the X axis done"
msgstr "Scale on the X axis done"

#: flatcamEditors/FlatCAMGeoEditor.py:1468
#: flatcamEditors/FlatCAMGrbEditor.py:5888
msgid "Scale on the Y axis done"
msgstr "Scale on the Y axis done"

#: flatcamEditors/FlatCAMGeoEditor.py:1472
msgid "Scale action was not executed"
msgstr "Scale action was not executed"

#: flatcamEditors/FlatCAMGeoEditor.py:1482
#: flatcamEditors/FlatCAMGrbEditor.py:5906
msgid "No shape selected. Please Select a shape to offset!"
msgstr "No shape selected. Please Select a shape to offset!"

#: flatcamEditors/FlatCAMGeoEditor.py:1485
#: flatcamEditors/FlatCAMGrbEditor.py:5909 flatcamTools/ToolTransform.py:781
msgid "Applying Offset"
msgstr "Applying Offset"

#: flatcamEditors/FlatCAMGeoEditor.py:1498
#: flatcamEditors/FlatCAMGrbEditor.py:5933
msgid "Offset on the X axis done"
msgstr "Offset on the X axis done"

#: flatcamEditors/FlatCAMGeoEditor.py:1501
#: flatcamEditors/FlatCAMGrbEditor.py:5936
msgid "Offset on the Y axis done"
msgstr "Offset on the Y axis done"

#: flatcamEditors/FlatCAMGeoEditor.py:1506
msgid "Offset action was not executed"
msgstr "Offset action was not executed"

#: flatcamEditors/FlatCAMGeoEditor.py:1510
#: flatcamEditors/FlatCAMGrbEditor.py:5945
msgid "Rotate ..."
msgstr "Rotate ..."

#: flatcamEditors/FlatCAMGeoEditor.py:1511
#: flatcamEditors/FlatCAMGeoEditor.py:1566
#: flatcamEditors/FlatCAMGeoEditor.py:1583
#: flatcamEditors/FlatCAMGrbEditor.py:5946
#: flatcamEditors/FlatCAMGrbEditor.py:6001
#: flatcamEditors/FlatCAMGrbEditor.py:6018
msgid "Enter an Angle Value (degrees)"
msgstr "Enter an Angle Value (degrees)"

#: flatcamEditors/FlatCAMGeoEditor.py:1520
#: flatcamEditors/FlatCAMGrbEditor.py:5955
msgid "Geometry shape rotate done"
msgstr "Geometry shape rotate done"

#: flatcamEditors/FlatCAMGeoEditor.py:1524
#: flatcamEditors/FlatCAMGrbEditor.py:5959
msgid "Geometry shape rotate cancelled"
msgstr "Geometry shape rotate cancelled"

#: flatcamEditors/FlatCAMGeoEditor.py:1529
#: flatcamEditors/FlatCAMGrbEditor.py:5964
msgid "Offset on X axis ..."
msgstr "Offset on X axis ..."

#: flatcamEditors/FlatCAMGeoEditor.py:1530
#: flatcamEditors/FlatCAMGeoEditor.py:1549
#: flatcamEditors/FlatCAMGrbEditor.py:5965
#: flatcamEditors/FlatCAMGrbEditor.py:5984
msgid "Enter a distance Value"
msgstr "Enter a distance Value"

#: flatcamEditors/FlatCAMGeoEditor.py:1539
#: flatcamEditors/FlatCAMGrbEditor.py:5974
msgid "Geometry shape offset on X axis done"
msgstr "Geometry shape offset on X axis done"

#: flatcamEditors/FlatCAMGeoEditor.py:1543
#: flatcamEditors/FlatCAMGrbEditor.py:5978
msgid "Geometry shape offset X cancelled"
msgstr "Geometry shape offset X cancelled"

#: flatcamEditors/FlatCAMGeoEditor.py:1548
#: flatcamEditors/FlatCAMGrbEditor.py:5983
msgid "Offset on Y axis ..."
msgstr "Offset on Y axis ..."

#: flatcamEditors/FlatCAMGeoEditor.py:1558
#: flatcamEditors/FlatCAMGrbEditor.py:5993
msgid "Geometry shape offset on Y axis done"
msgstr "Geometry shape offset on Y axis done"

#: flatcamEditors/FlatCAMGeoEditor.py:1562
msgid "Geometry shape offset on Y axis canceled"
msgstr "Geometry shape offset on Y axis canceled"

#: flatcamEditors/FlatCAMGeoEditor.py:1565
#: flatcamEditors/FlatCAMGrbEditor.py:6000
msgid "Skew on X axis ..."
msgstr "Skew on X axis ..."

#: flatcamEditors/FlatCAMGeoEditor.py:1575
#: flatcamEditors/FlatCAMGrbEditor.py:6010
msgid "Geometry shape skew on X axis done"
msgstr "Geometry shape skew on X axis done"

#: flatcamEditors/FlatCAMGeoEditor.py:1579
msgid "Geometry shape skew on X axis canceled"
msgstr "Geometry shape skew on X axis canceled"

#: flatcamEditors/FlatCAMGeoEditor.py:1582
#: flatcamEditors/FlatCAMGrbEditor.py:6017
msgid "Skew on Y axis ..."
msgstr "Skew on Y axis ..."

#: flatcamEditors/FlatCAMGeoEditor.py:1592
#: flatcamEditors/FlatCAMGrbEditor.py:6027
msgid "Geometry shape skew on Y axis done"
msgstr "Geometry shape skew on Y axis done"

#: flatcamEditors/FlatCAMGeoEditor.py:1596
msgid "Geometry shape skew on Y axis canceled"
msgstr "Geometry shape skew on Y axis canceled"

#: flatcamEditors/FlatCAMGeoEditor.py:1960
#: flatcamEditors/FlatCAMGeoEditor.py:2012
#: flatcamEditors/FlatCAMGrbEditor.py:1396
#: flatcamEditors/FlatCAMGrbEditor.py:1466
msgid "Click on Center point ..."
msgstr "Click on Center point ..."

#: flatcamEditors/FlatCAMGeoEditor.py:1967
#: flatcamEditors/FlatCAMGrbEditor.py:1404
msgid "Click on Perimeter point to complete ..."
msgstr "Click on Perimeter point to complete ..."

#: flatcamEditors/FlatCAMGeoEditor.py:1997
msgid "Done. Adding Circle completed."
msgstr "Done. Adding Circle completed."

#: flatcamEditors/FlatCAMGeoEditor.py:2032
#: flatcamEditors/FlatCAMGrbEditor.py:1498
msgid "Click on Start point ..."
msgstr "Click on Start point ..."

#: flatcamEditors/FlatCAMGeoEditor.py:2034
#: flatcamEditors/FlatCAMGrbEditor.py:1500
msgid "Click on Point3 ..."
msgstr "Click on Point3 ..."

#: flatcamEditors/FlatCAMGeoEditor.py:2036
#: flatcamEditors/FlatCAMGrbEditor.py:1502
msgid "Click on Stop point ..."
msgstr "Click on Stop point ..."

#: flatcamEditors/FlatCAMGeoEditor.py:2041
#: flatcamEditors/FlatCAMGrbEditor.py:1507
msgid "Click on Stop point to complete ..."
msgstr "Click on Stop point to complete ..."

#: flatcamEditors/FlatCAMGeoEditor.py:2043
#: flatcamEditors/FlatCAMGrbEditor.py:1509
msgid "Click on Point2 to complete ..."
msgstr "Click on Point2 to complete ..."

#: flatcamEditors/FlatCAMGeoEditor.py:2045
#: flatcamEditors/FlatCAMGrbEditor.py:1511
msgid "Click on Center point to complete ..."
msgstr "Click on Center point to complete ..."

#: flatcamEditors/FlatCAMGeoEditor.py:2057
#, python-format
msgid "Direction: %s"
msgstr "Direction: %s"

#: flatcamEditors/FlatCAMGeoEditor.py:2067
#: flatcamEditors/FlatCAMGrbEditor.py:1533
msgid "Mode: Start -> Stop -> Center. Click on Start point ..."
msgstr "Mode: Start -> Stop -> Center. Click on Start point ..."

#: flatcamEditors/FlatCAMGeoEditor.py:2070
#: flatcamEditors/FlatCAMGrbEditor.py:1536
msgid "Mode: Point1 -> Point3 -> Point2. Click on Point1 ..."
msgstr "Mode: Point1 -> Point3 -> Point2. Click on Point1 ..."

#: flatcamEditors/FlatCAMGeoEditor.py:2073
#: flatcamEditors/FlatCAMGrbEditor.py:1539
msgid "Mode: Center -> Start -> Stop. Click on Center point ..."
msgstr "Mode: Center -> Start -> Stop. Click on Center point ..."

#: flatcamEditors/FlatCAMGeoEditor.py:2212
msgid "Done. Arc completed."
msgstr "Done. Arc completed."

#: flatcamEditors/FlatCAMGeoEditor.py:2231
#: flatcamEditors/FlatCAMGeoEditor.py:2285
#: flatcamEditors/FlatCAMGeoEditor.py:2713
msgid "Click on 1st corner ..."
msgstr "Click on 1st corner ..."

#: flatcamEditors/FlatCAMGeoEditor.py:2237
msgid "Click on opposite corner to complete ..."
msgstr "Click on opposite corner to complete ..."

#: flatcamEditors/FlatCAMGeoEditor.py:2266
msgid "Done. Rectangle completed."
msgstr "Done. Rectangle completed."

#: flatcamEditors/FlatCAMGeoEditor.py:2292
msgid "Click on next Point or click right mouse button to complete ..."
msgstr "Click on next Point or click right mouse button to complete ..."

#: flatcamEditors/FlatCAMGeoEditor.py:2321
msgid "Done. Polygon completed."
msgstr "Done. Polygon completed."

#: flatcamEditors/FlatCAMGeoEditor.py:2331
#: flatcamEditors/FlatCAMGeoEditor.py:2377
#: flatcamEditors/FlatCAMGrbEditor.py:1085
#: flatcamEditors/FlatCAMGrbEditor.py:1287
msgid "Backtracked one point ..."
msgstr "Backtracked one point ..."

#: flatcamEditors/FlatCAMGeoEditor.py:2359
msgid "Done. Path completed."
msgstr "Done. Path completed."

#: flatcamEditors/FlatCAMGeoEditor.py:2477
msgid "No shape selected. Select a shape to explode"
msgstr "No shape selected. Select a shape to explode"

#: flatcamEditors/FlatCAMGeoEditor.py:2510
msgid "Done. Polygons exploded into lines."
msgstr "Done. Polygons exploded into lines."

#: flatcamEditors/FlatCAMGeoEditor.py:2532
msgid "MOVE: No shape selected. Select a shape to move"
msgstr "MOVE: No shape selected. Select a shape to move"

#: flatcamEditors/FlatCAMGeoEditor.py:2534
#: flatcamEditors/FlatCAMGeoEditor.py:2546
msgid " MOVE: Click on reference point ..."
msgstr " MOVE: Click on reference point ..."

#: flatcamEditors/FlatCAMGeoEditor.py:2537
msgid " Click on destination point ..."
msgstr " Click on destination point ..."

#: flatcamEditors/FlatCAMGeoEditor.py:2572
msgid "Done. Geometry(s) Move completed."
msgstr "Done. Geometry(s) Move completed."

#: flatcamEditors/FlatCAMGeoEditor.py:2693
msgid "Done. Geometry(s) Copy completed."
msgstr "Done. Geometry(s) Copy completed."

#: flatcamEditors/FlatCAMGeoEditor.py:2730
msgid ""
"Font not supported. Only Regular, Bold, Italic and BoldItalic are supported. "
"Error"
msgstr ""
"Font not supported. Only Regular, Bold, Italic and BoldItalic are supported. "
"Error"

#: flatcamEditors/FlatCAMGeoEditor.py:2738
msgid "No text to add."
msgstr "No text to add."

#: flatcamEditors/FlatCAMGeoEditor.py:2745
msgid " Done. Adding Text completed."
msgstr " Done. Adding Text completed."

#: flatcamEditors/FlatCAMGeoEditor.py:2773
msgid "Create buffer geometry ..."
msgstr "Create buffer geometry ..."

#: flatcamEditors/FlatCAMGeoEditor.py:2785
#: flatcamEditors/FlatCAMGeoEditor.py:2815
#: flatcamEditors/FlatCAMGeoEditor.py:2845
msgid "Buffer cancelled. No shape selected."
msgstr "Buffer cancelled. No shape selected."

#: flatcamEditors/FlatCAMGeoEditor.py:2810
#: flatcamEditors/FlatCAMGrbEditor.py:4800
msgid "Done. Buffer Tool completed."
msgstr "Done. Buffer Tool completed."

#: flatcamEditors/FlatCAMGeoEditor.py:2840
msgid "Done. Buffer Int Tool completed."
msgstr "Done. Buffer Int Tool completed."

#: flatcamEditors/FlatCAMGeoEditor.py:2870
msgid "Done. Buffer Ext Tool completed."
msgstr "Done. Buffer Ext Tool completed."

#: flatcamEditors/FlatCAMGeoEditor.py:2905
#: flatcamEditors/FlatCAMGrbEditor.py:2086
msgid "Select a shape to act as deletion area ..."
msgstr "Select a shape to act as deletion area ..."

#: flatcamEditors/FlatCAMGeoEditor.py:2907
#: flatcamEditors/FlatCAMGeoEditor.py:2926
#: flatcamEditors/FlatCAMGeoEditor.py:2932
#: flatcamEditors/FlatCAMGrbEditor.py:2088
msgid "Click to pick-up the erase shape..."
msgstr "Click to pick-up the erase shape..."

#: flatcamEditors/FlatCAMGeoEditor.py:2936
#: flatcamEditors/FlatCAMGrbEditor.py:2145
msgid "Click to erase ..."
msgstr "Click to erase ..."

#: flatcamEditors/FlatCAMGeoEditor.py:2966
#: flatcamEditors/FlatCAMGrbEditor.py:2179
msgid "Done. Eraser tool action completed."
msgstr "Done. Eraser tool action completed."

#: flatcamEditors/FlatCAMGeoEditor.py:3009
msgid "Create Paint geometry ..."
msgstr "Create Paint geometry ..."

#: flatcamEditors/FlatCAMGeoEditor.py:3023
#: flatcamEditors/FlatCAMGrbEditor.py:2330
msgid "Shape transformations ..."
msgstr "Shape transformations ..."

#: flatcamEditors/FlatCAMGeoEditor.py:3644
msgid "Editing MultiGeo Geometry, tool"
msgstr "Editing MultiGeo Geometry, tool"

#: flatcamEditors/FlatCAMGeoEditor.py:3646
msgid "with diameter"
msgstr "with diameter"

#: flatcamEditors/FlatCAMGeoEditor.py:4048
msgid "Copy cancelled. No shape selected."
msgstr "Copy cancelled. No shape selected."

#: flatcamEditors/FlatCAMGeoEditor.py:4055 flatcamGUI/FlatCAMGUI.py:3084
#: flatcamGUI/FlatCAMGUI.py:3131 flatcamGUI/FlatCAMGUI.py:3150
#: flatcamGUI/FlatCAMGUI.py:3285 flatcamGUI/FlatCAMGUI.py:3298
#: flatcamGUI/FlatCAMGUI.py:3332 flatcamGUI/FlatCAMGUI.py:3394
msgid "Click on target point."
msgstr "Click on target point."

#: flatcamEditors/FlatCAMGeoEditor.py:4345
#: flatcamEditors/FlatCAMGeoEditor.py:4380
msgid "A selection of at least 2 geo items is required to do Intersection."
msgstr "A selection of at least 2 geo items is required to do Intersection."

#: flatcamEditors/FlatCAMGeoEditor.py:4466
#: flatcamEditors/FlatCAMGeoEditor.py:4575
msgid ""
"Negative buffer value is not accepted. Use Buffer interior to generate an "
"'inside' shape"
msgstr ""
"Negative buffer value is not accepted. Use Buffer interior to generate an "
"'inside' shape"

#: flatcamEditors/FlatCAMGeoEditor.py:4476
#: flatcamEditors/FlatCAMGeoEditor.py:4532
#: flatcamEditors/FlatCAMGeoEditor.py:4584
msgid "Nothing selected for buffering."
msgstr "Nothing selected for buffering."

#: flatcamEditors/FlatCAMGeoEditor.py:4481
#: flatcamEditors/FlatCAMGeoEditor.py:4537
#: flatcamEditors/FlatCAMGeoEditor.py:4589
msgid "Invalid distance for buffering."
msgstr "Invalid distance for buffering."

#: flatcamEditors/FlatCAMGeoEditor.py:4505
#: flatcamEditors/FlatCAMGeoEditor.py:4609
msgid "Failed, the result is empty. Choose a different buffer value."
msgstr "Failed, the result is empty. Choose a different buffer value."

#: flatcamEditors/FlatCAMGeoEditor.py:4516
msgid "Full buffer geometry created."
msgstr "Full buffer geometry created."

#: flatcamEditors/FlatCAMGeoEditor.py:4523
msgid "Negative buffer value is not accepted."
msgstr "Negative buffer value is not accepted."

#: flatcamEditors/FlatCAMGeoEditor.py:4557
msgid "Failed, the result is empty. Choose a smaller buffer value."
msgstr "Failed, the result is empty. Choose a smaller buffer value."

#: flatcamEditors/FlatCAMGeoEditor.py:4568
msgid "Interior buffer geometry created."
msgstr "Interior buffer geometry created."

#: flatcamEditors/FlatCAMGeoEditor.py:4620
msgid "Exterior buffer geometry created."
msgstr "Exterior buffer geometry created."

#: flatcamEditors/FlatCAMGeoEditor.py:4685
msgid "Nothing selected for painting."
msgstr "Nothing selected for painting."

#: flatcamEditors/FlatCAMGeoEditor.py:4692
msgid "Invalid value for"
msgstr "Invalid value for"

#: flatcamEditors/FlatCAMGeoEditor.py:4698
#, python-format
msgid "Could not do Paint. Overlap value has to be less than 1.00 (100%%)."
msgstr "Could not do Paint. Overlap value has to be less than 1.00 (100%%)."

#: flatcamEditors/FlatCAMGeoEditor.py:4757
msgid ""
"Could not do Paint. Try a different combination of parameters. Or a "
"different method of Paint"
msgstr ""
"Could not do Paint. Try a different combination of parameters. Or a "
"different method of Paint"

#: flatcamEditors/FlatCAMGeoEditor.py:4771
msgid "Paint done."
msgstr "Paint done."

#: flatcamEditors/FlatCAMGrbEditor.py:208
msgid "To add an Pad first select a aperture in Aperture Table"
msgstr "To add an Pad first select a aperture in Aperture Table"

#: flatcamEditors/FlatCAMGrbEditor.py:215
#: flatcamEditors/FlatCAMGrbEditor.py:409
msgid "Aperture size is zero. It needs to be greater than zero."
msgstr "Aperture size is zero. It needs to be greater than zero."

#: flatcamEditors/FlatCAMGrbEditor.py:366
#: flatcamEditors/FlatCAMGrbEditor.py:674
msgid ""
"Incompatible aperture type. Select an aperture with type 'C', 'R' or 'O'."
msgstr ""
"Incompatible aperture type. Select an aperture with type 'C', 'R' or 'O'."

#: flatcamEditors/FlatCAMGrbEditor.py:379
msgid "Done. Adding Pad completed."
msgstr "Done. Adding Pad completed."

#: flatcamEditors/FlatCAMGrbEditor.py:401
msgid "To add an Pad Array first select a aperture in Aperture Table"
msgstr "To add an Pad Array first select a aperture in Aperture Table"

#: flatcamEditors/FlatCAMGrbEditor.py:479
msgid "Click on the Pad Circular Array Start position"
msgstr "Click on the Pad Circular Array Start position"

#: flatcamEditors/FlatCAMGrbEditor.py:700
msgid "Too many Pads for the selected spacing angle."
msgstr "Too many Pads for the selected spacing angle."

#: flatcamEditors/FlatCAMGrbEditor.py:723
msgid "Done. Pad Array added."
msgstr "Done. Pad Array added."

#: flatcamEditors/FlatCAMGrbEditor.py:744
msgid "Select shape(s) and then click ..."
msgstr "Select shape(s) and then click ..."

#: flatcamEditors/FlatCAMGrbEditor.py:756
msgid "Failed. Nothing selected."
msgstr "Failed. Nothing selected."

#: flatcamEditors/FlatCAMGrbEditor.py:772
msgid ""
"Failed. Poligonize works only on geometries belonging to the same aperture."
msgstr ""
"Failed. Poligonize works only on geometries belonging to the same aperture."

#: flatcamEditors/FlatCAMGrbEditor.py:826
msgid "Done. Poligonize completed."
msgstr "Done. Poligonize completed."

#: flatcamEditors/FlatCAMGrbEditor.py:879
#: flatcamEditors/FlatCAMGrbEditor.py:1102
#: flatcamEditors/FlatCAMGrbEditor.py:1126
msgid "Corner Mode 1: 45 degrees ..."
msgstr "Corner Mode 1: 45 degrees ..."

#: flatcamEditors/FlatCAMGrbEditor.py:881
msgid "Click on 1st point ..."
msgstr "Click on 1st point ..."

#: flatcamEditors/FlatCAMGrbEditor.py:891
#: flatcamEditors/FlatCAMGrbEditor.py:1202
msgid "Click on next Point or click Right mouse button to complete ..."
msgstr "Click on next Point or click Right mouse button to complete ..."

#: flatcamEditors/FlatCAMGrbEditor.py:1090
#: flatcamEditors/FlatCAMGrbEditor.py:1123
msgid "Corner Mode 2: Reverse 45 degrees ..."
msgstr "Corner Mode 2: Reverse 45 degrees ..."

#: flatcamEditors/FlatCAMGrbEditor.py:1093
#: flatcamEditors/FlatCAMGrbEditor.py:1120
msgid "Corner Mode 3: 90 degrees ..."
msgstr "Corner Mode 3: 90 degrees ..."

#: flatcamEditors/FlatCAMGrbEditor.py:1096
#: flatcamEditors/FlatCAMGrbEditor.py:1117
msgid "Corner Mode 4: Reverse 90 degrees ..."
msgstr "Corner Mode 4: Reverse 90 degrees ..."

#: flatcamEditors/FlatCAMGrbEditor.py:1099
#: flatcamEditors/FlatCAMGrbEditor.py:1114
msgid "Corner Mode 5: Free angle ..."
msgstr "Corner Mode 5: Free angle ..."

#: flatcamEditors/FlatCAMGrbEditor.py:1153
#: flatcamEditors/FlatCAMGrbEditor.py:1319
#: flatcamEditors/FlatCAMGrbEditor.py:1358
msgid "Track Mode 1: 45 degrees ..."
msgstr "Track Mode 1: 45 degrees ..."

#: flatcamEditors/FlatCAMGrbEditor.py:1299
#: flatcamEditors/FlatCAMGrbEditor.py:1353
msgid "Track Mode 2: Reverse 45 degrees ..."
msgstr "Track Mode 2: Reverse 45 degrees ..."

#: flatcamEditors/FlatCAMGrbEditor.py:1304
#: flatcamEditors/FlatCAMGrbEditor.py:1348
msgid "Track Mode 3: 90 degrees ..."
msgstr "Track Mode 3: 90 degrees ..."

#: flatcamEditors/FlatCAMGrbEditor.py:1309
#: flatcamEditors/FlatCAMGrbEditor.py:1343
msgid "Track Mode 4: Reverse 90 degrees ..."
msgstr "Track Mode 4: Reverse 90 degrees ..."

#: flatcamEditors/FlatCAMGrbEditor.py:1314
#: flatcamEditors/FlatCAMGrbEditor.py:1338
msgid "Track Mode 5: Free angle ..."
msgstr "Track Mode 5: Free angle ..."

#: flatcamEditors/FlatCAMGrbEditor.py:1720
msgid "Scale the selected Gerber apertures ..."
msgstr "Scale the selected Gerber apertures ..."

#: flatcamEditors/FlatCAMGrbEditor.py:1762
msgid "Buffer the selected apertures ..."
msgstr "Buffer the selected apertures ..."

#: flatcamEditors/FlatCAMGrbEditor.py:1804
msgid "Mark polygon areas in the edited Gerber ..."
msgstr "Mark polygon areas in the edited Gerber ..."

#: flatcamEditors/FlatCAMGrbEditor.py:1870
msgid "Nothing selected to move"
msgstr "Nothing selected to move"

#: flatcamEditors/FlatCAMGrbEditor.py:1994
msgid "Done. Apertures Move completed."
msgstr "Done. Apertures Move completed."

#: flatcamEditors/FlatCAMGrbEditor.py:2071
msgid "Done. Apertures copied."
msgstr "Done. Apertures copied."

#: flatcamEditors/FlatCAMGrbEditor.py:2373 flatcamGUI/FlatCAMGUI.py:1879
#: flatcamGUI/PreferencesUI.py:1662
msgid "Gerber Editor"
msgstr "Gerber Editor"

#: flatcamEditors/FlatCAMGrbEditor.py:2393 flatcamGUI/ObjectUI.py:205
#: flatcamTools/ToolProperties.py:136
msgid "Apertures"
msgstr "Apertures"

#: flatcamEditors/FlatCAMGrbEditor.py:2395 flatcamGUI/ObjectUI.py:207
msgid "Apertures Table for the Gerber Object."
msgstr "Apertures Table for the Gerber Object."

#: flatcamEditors/FlatCAMGrbEditor.py:2406
#: flatcamEditors/FlatCAMGrbEditor.py:3734 flatcamGUI/ObjectUI.py:240
msgid "Code"
msgstr "Code"

#: flatcamEditors/FlatCAMGrbEditor.py:2406
#: flatcamEditors/FlatCAMGrbEditor.py:3734 flatcamGUI/ObjectUI.py:240
#: flatcamGUI/ObjectUI.py:1099 flatcamGUI/ObjectUI.py:1711
msgid "Type"
msgstr "Type"

#: flatcamEditors/FlatCAMGrbEditor.py:2406
#: flatcamEditors/FlatCAMGrbEditor.py:3734 flatcamGUI/ObjectUI.py:240
msgid "Size"
msgstr "Size"

#: flatcamEditors/FlatCAMGrbEditor.py:2406
#: flatcamEditors/FlatCAMGrbEditor.py:3734 flatcamGUI/ObjectUI.py:240
msgid "Dim"
msgstr "Dim"

#: flatcamEditors/FlatCAMGrbEditor.py:2410 flatcamGUI/ObjectUI.py:244
msgid "Index"
msgstr "Index"

#: flatcamEditors/FlatCAMGrbEditor.py:2412
#: flatcamEditors/FlatCAMGrbEditor.py:2439 flatcamGUI/ObjectUI.py:246
msgid "Aperture Code"
msgstr "Aperture Code"

#: flatcamEditors/FlatCAMGrbEditor.py:2414 flatcamGUI/ObjectUI.py:248
msgid "Type of aperture: circular, rectangle, macros etc"
msgstr "Type of aperture: circular, rectangle, macros etc"

#: flatcamEditors/FlatCAMGrbEditor.py:2416 flatcamGUI/ObjectUI.py:250
msgid "Aperture Size:"
msgstr "Aperture Size:"

#: flatcamEditors/FlatCAMGrbEditor.py:2418 flatcamGUI/ObjectUI.py:252
msgid ""
"Aperture Dimensions:\n"
" - (width, height) for R, O type.\n"
" - (dia, nVertices) for P type"
msgstr ""
"Aperture Dimensions:\n"
" - (width, height) for R, O type.\n"
" - (dia, nVertices) for P type"

#: flatcamEditors/FlatCAMGrbEditor.py:2441 flatcamGUI/PreferencesUI.py:1692
msgid "Code for the new aperture"
msgstr "Code for the new aperture"

#: flatcamEditors/FlatCAMGrbEditor.py:2449
msgid "Aperture Size"
msgstr "Aperture Size"

#: flatcamEditors/FlatCAMGrbEditor.py:2451
msgid ""
"Size for the new aperture.\n"
"If aperture type is 'R' or 'O' then\n"
"this value is automatically\n"
"calculated as:\n"
"sqrt(width**2 + height**2)"
msgstr ""
"Size for the new aperture.\n"
"If aperture type is 'R' or 'O' then\n"
"this value is automatically\n"
"calculated as:\n"
"sqrt(width**2 + height**2)"

#: flatcamEditors/FlatCAMGrbEditor.py:2463
msgid "Aperture Type"
msgstr "Aperture Type"

#: flatcamEditors/FlatCAMGrbEditor.py:2465
msgid ""
"Select the type of new aperture. Can be:\n"
"C = circular\n"
"R = rectangular\n"
"O = oblong"
msgstr ""
"Select the type of new aperture. Can be:\n"
"C = circular\n"
"R = rectangular\n"
"O = oblong"

#: flatcamEditors/FlatCAMGrbEditor.py:2476
msgid "Aperture Dim"
msgstr "Aperture Dim"

#: flatcamEditors/FlatCAMGrbEditor.py:2478
msgid ""
"Dimensions for the new aperture.\n"
"Active only for rectangular apertures (type R).\n"
"The format is (width, height)"
msgstr ""
"Dimensions for the new aperture.\n"
"Active only for rectangular apertures (type R).\n"
"The format is (width, height)"

#: flatcamEditors/FlatCAMGrbEditor.py:2487
msgid "Add/Delete Aperture"
msgstr "Add/Delete Aperture"

#: flatcamEditors/FlatCAMGrbEditor.py:2489
msgid "Add/Delete an aperture in the aperture table"
msgstr "Add/Delete an aperture in the aperture table"

#: flatcamEditors/FlatCAMGrbEditor.py:2498
msgid "Add a new aperture to the aperture list."
msgstr "Add a new aperture to the aperture list."

#: flatcamEditors/FlatCAMGrbEditor.py:2503
msgid "Delete a aperture in the aperture list"
msgstr "Delete a aperture in the aperture list"

#: flatcamEditors/FlatCAMGrbEditor.py:2520
msgid "Buffer Aperture"
msgstr "Buffer Aperture"

#: flatcamEditors/FlatCAMGrbEditor.py:2522
msgid "Buffer a aperture in the aperture list"
msgstr "Buffer a aperture in the aperture list"

#: flatcamEditors/FlatCAMGrbEditor.py:2532 flatcamGUI/PreferencesUI.py:1827
msgid "Buffer distance"
msgstr "Buffer distance"

#: flatcamEditors/FlatCAMGrbEditor.py:2533
msgid "Buffer corner"
msgstr "Buffer corner"

#: flatcamEditors/FlatCAMGrbEditor.py:2535
msgid ""
"There are 3 types of corners:\n"
" - 'Round': the corner is rounded.\n"
" - 'Square:' the corner is met in a sharp angle.\n"
" - 'Beveled:' the corner is a line that directly connects the features "
"meeting in the corner"
msgstr ""
"There are 3 types of corners:\n"
" - 'Round': the corner is rounded.\n"
" - 'Square:' the corner is met in a sharp angle.\n"
" - 'Beveled:' the corner is a line that directly connects the features "
"meeting in the corner"

#: flatcamEditors/FlatCAMGrbEditor.py:2550 flatcamGUI/FlatCAMGUI.py:821
#: flatcamGUI/FlatCAMGUI.py:1813 flatcamGUI/FlatCAMGUI.py:1865
#: flatcamGUI/FlatCAMGUI.py:1892 flatcamGUI/FlatCAMGUI.py:2231
msgid "Buffer"
msgstr "Buffer"

#: flatcamEditors/FlatCAMGrbEditor.py:2565
msgid "Scale Aperture"
msgstr "Scale Aperture"

#: flatcamEditors/FlatCAMGrbEditor.py:2567
msgid "Scale a aperture in the aperture list"
msgstr "Scale a aperture in the aperture list"

#: flatcamEditors/FlatCAMGrbEditor.py:2575 flatcamGUI/PreferencesUI.py:1843
msgid "Scale factor"
msgstr "Scale factor"

#: flatcamEditors/FlatCAMGrbEditor.py:2577
msgid ""
"The factor by which to scale the selected aperture.\n"
"Values can be between 0.0000 and 999.9999"
msgstr ""
"The factor by which to scale the selected aperture.\n"
"Values can be between 0.0000 and 999.9999"

#: flatcamEditors/FlatCAMGrbEditor.py:2603
msgid "Mark polygons"
msgstr "Mark polygons"

#: flatcamEditors/FlatCAMGrbEditor.py:2605
msgid "Mark the polygon areas."
msgstr "Mark the polygon areas."

#: flatcamEditors/FlatCAMGrbEditor.py:2613
msgid "Area UPPER threshold"
msgstr "Area UPPER threshold"

#: flatcamEditors/FlatCAMGrbEditor.py:2615
msgid ""
"The threshold value, all areas less than this are marked.\n"
"Can have a value between 0.0000 and 9999.9999"
msgstr ""
"The threshold value, all areas less than this are marked.\n"
"Can have a value between 0.0000 and 9999.9999"

#: flatcamEditors/FlatCAMGrbEditor.py:2622
msgid "Area LOWER threshold"
msgstr "Area LOWER threshold"

#: flatcamEditors/FlatCAMGrbEditor.py:2624
msgid ""
"The threshold value, all areas more than this are marked.\n"
"Can have a value between 0.0000 and 9999.9999"
msgstr ""
"The threshold value, all areas more than this are marked.\n"
"Can have a value between 0.0000 and 9999.9999"

#: flatcamEditors/FlatCAMGrbEditor.py:2638
msgid "Mark"
msgstr "Mark"

#: flatcamEditors/FlatCAMGrbEditor.py:2640
msgid "Mark the polygons that fit within limits."
msgstr "Mark the polygons that fit within limits."

#: flatcamEditors/FlatCAMGrbEditor.py:2646
msgid "Delete all the marked polygons."
msgstr "Delete all the marked polygons."

#: flatcamEditors/FlatCAMGrbEditor.py:2650 flatcamGUI/PreferencesUI.py:686
msgid "Clear"
msgstr "Clear"

#: flatcamEditors/FlatCAMGrbEditor.py:2652
msgid "Clear all the markings."
msgstr "Clear all the markings."

#: flatcamEditors/FlatCAMGrbEditor.py:2672 flatcamGUI/FlatCAMGUI.py:811
#: flatcamGUI/FlatCAMGUI.py:1813 flatcamGUI/FlatCAMGUI.py:2221
msgid "Add Pad Array"
msgstr "Add Pad Array"

#: flatcamEditors/FlatCAMGrbEditor.py:2674
msgid "Add an array of pads (linear or circular array)"
msgstr "Add an array of pads (linear or circular array)"

#: flatcamEditors/FlatCAMGrbEditor.py:2680
msgid ""
"Select the type of pads array to create.\n"
"It can be Linear X(Y) or Circular"
msgstr ""
"Select the type of pads array to create.\n"
"It can be Linear X(Y) or Circular"

#: flatcamEditors/FlatCAMGrbEditor.py:2691 flatcamGUI/PreferencesUI.py:1729
msgid "Nr of pads"
msgstr "Nr of pads"

#: flatcamEditors/FlatCAMGrbEditor.py:2693 flatcamGUI/PreferencesUI.py:1731
msgid "Specify how many pads to be in the array."
msgstr "Specify how many pads to be in the array."

#: flatcamEditors/FlatCAMGrbEditor.py:3215
#: flatcamEditors/FlatCAMGrbEditor.py:3219
msgid "Aperture code value is missing or wrong format. Add it and retry."
msgstr "Aperture code value is missing or wrong format. Add it and retry."

#: flatcamEditors/FlatCAMGrbEditor.py:3255
msgid ""
"Aperture dimensions value is missing or wrong format. Add it in format "
"(width, height) and retry."
msgstr ""
"Aperture dimensions value is missing or wrong format. Add it in format "
"(width, height) and retry."

#: flatcamEditors/FlatCAMGrbEditor.py:3268
msgid "Aperture size value is missing or wrong format. Add it and retry."
msgstr "Aperture size value is missing or wrong format. Add it and retry."

#: flatcamEditors/FlatCAMGrbEditor.py:3279
msgid "Aperture already in the aperture table."
msgstr "Aperture already in the aperture table."

#: flatcamEditors/FlatCAMGrbEditor.py:3287
msgid "Added new aperture with code"
msgstr "Added new aperture with code"

#: flatcamEditors/FlatCAMGrbEditor.py:3316
msgid " Select an aperture in Aperture Table"
msgstr " Select an aperture in Aperture Table"

#: flatcamEditors/FlatCAMGrbEditor.py:3323
msgid "Select an aperture in Aperture Table -->"
msgstr "Select an aperture in Aperture Table -->"

#: flatcamEditors/FlatCAMGrbEditor.py:3347
msgid "Deleted aperture with code"
msgstr "Deleted aperture with code"

#: flatcamEditors/FlatCAMGrbEditor.py:3860
msgid "Adding geometry for aperture"
msgstr "Adding geometry for aperture"

#: flatcamEditors/FlatCAMGrbEditor.py:4043
msgid ""
"There are no Aperture definitions in the file. Aborting Gerber creation."
msgstr ""
"There are no Aperture definitions in the file. Aborting Gerber creation."

#: flatcamEditors/FlatCAMGrbEditor.py:4053
msgid "Creating Gerber."
msgstr "Creating Gerber."

#: flatcamEditors/FlatCAMGrbEditor.py:4062
msgid "Done. Gerber editing finished."
msgstr "Done. Gerber editing finished."

#: flatcamEditors/FlatCAMGrbEditor.py:4079
msgid "Cancelled. No aperture is selected"
msgstr "Cancelled. No aperture is selected"

#: flatcamEditors/FlatCAMGrbEditor.py:4631
msgid "Failed. No aperture geometry is selected."
msgstr "Failed. No aperture geometry is selected."

#: flatcamEditors/FlatCAMGrbEditor.py:4640
#: flatcamEditors/FlatCAMGrbEditor.py:4912
msgid "Done. Apertures geometry deleted."
msgstr "Done. Apertures geometry deleted."

#: flatcamEditors/FlatCAMGrbEditor.py:4783
msgid "No aperture to buffer. Select at least one aperture and try again."
msgstr "No aperture to buffer. Select at least one aperture and try again."

#: flatcamEditors/FlatCAMGrbEditor.py:4796
msgid "Failed."
msgstr "Failed."

#: flatcamEditors/FlatCAMGrbEditor.py:4815
msgid "Scale factor value is missing or wrong format. Add it and retry."
msgstr "Scale factor value is missing or wrong format. Add it and retry."

#: flatcamEditors/FlatCAMGrbEditor.py:4847
msgid "No aperture to scale. Select at least one aperture and try again."
msgstr "No aperture to scale. Select at least one aperture and try again."

#: flatcamEditors/FlatCAMGrbEditor.py:4863
msgid "Done. Scale Tool completed."
msgstr "Done. Scale Tool completed."

#: flatcamEditors/FlatCAMGrbEditor.py:4901
msgid "Polygons marked."
msgstr "Polygons marked."

#: flatcamEditors/FlatCAMGrbEditor.py:4904
msgid "No polygons were marked. None fit within the limits."
msgstr "No polygons were marked. None fit within the limits."

#: flatcamEditors/FlatCAMGrbEditor.py:5683
msgid "Rotation action was not executed."
msgstr "Rotation action was not executed."

#: flatcamEditors/FlatCAMGrbEditor.py:5822
msgid "Skew action was not executed."
msgstr "Skew action was not executed."

#: flatcamEditors/FlatCAMGrbEditor.py:5892
msgid "Scale action was not executed."
msgstr "Scale action was not executed."

#: flatcamEditors/FlatCAMGrbEditor.py:5941
msgid "Offset action was not executed."
msgstr "Offset action was not executed."

#: flatcamEditors/FlatCAMGrbEditor.py:5997
msgid "Geometry shape offset Y cancelled"
msgstr "Geometry shape offset Y cancelled"

#: flatcamEditors/FlatCAMGrbEditor.py:6014
msgid "Geometry shape skew X cancelled"
msgstr "Geometry shape skew X cancelled"

#: flatcamEditors/FlatCAMGrbEditor.py:6031
msgid "Geometry shape skew Y cancelled"
msgstr "Geometry shape skew Y cancelled"

#: flatcamEditors/FlatCAMTextEditor.py:54
msgid "Print Preview"
msgstr "Print Preview"

#: flatcamEditors/FlatCAMTextEditor.py:55
msgid "Open a OS standard Preview Print window."
msgstr "Open a OS standard Preview Print window."

#: flatcamEditors/FlatCAMTextEditor.py:58
msgid "Print Code"
msgstr "Print Code"

#: flatcamEditors/FlatCAMTextEditor.py:59
msgid "Open a OS standard Print window."
msgstr "Open a OS standard Print window."

#: flatcamEditors/FlatCAMTextEditor.py:61
msgid "Find in Code"
msgstr "Find in Code"

#: flatcamEditors/FlatCAMTextEditor.py:62
msgid "Will search and highlight in yellow the string in the Find box."
msgstr "Will search and highlight in yellow the string in the Find box."

#: flatcamEditors/FlatCAMTextEditor.py:66
msgid "Find box. Enter here the strings to be searched in the text."
msgstr "Find box. Enter here the strings to be searched in the text."

#: flatcamEditors/FlatCAMTextEditor.py:68
msgid "Replace With"
msgstr "Replace With"

#: flatcamEditors/FlatCAMTextEditor.py:69
msgid ""
"Will replace the string from the Find box with the one in the Replace box."
msgstr ""
"Will replace the string from the Find box with the one in the Replace box."

#: flatcamEditors/FlatCAMTextEditor.py:73
msgid "String to replace the one in the Find box throughout the text."
msgstr "String to replace the one in the Find box throughout the text."

#: flatcamEditors/FlatCAMTextEditor.py:75 flatcamGUI/ObjectUI.py:1604
#: flatcamGUI/PreferencesUI.py:3393 flatcamGUI/PreferencesUI.py:4276
msgid "All"
msgstr "All"

#: flatcamEditors/FlatCAMTextEditor.py:76
msgid ""
"When checked it will replace all instances in the 'Find' box\n"
"with the text in the 'Replace' box.."
msgstr ""
"When checked it will replace all instances in the 'Find' box\n"
"with the text in the 'Replace' box.."

#: flatcamEditors/FlatCAMTextEditor.py:79
msgid "Copy All"
msgstr "Copy All"

#: flatcamEditors/FlatCAMTextEditor.py:80
msgid "Will copy all the text in the Code Editor to the clipboard."
msgstr "Will copy all the text in the Code Editor to the clipboard."

#: flatcamEditors/FlatCAMTextEditor.py:83
msgid "Open Code"
msgstr "Open Code"

#: flatcamEditors/FlatCAMTextEditor.py:84
msgid "Will open a text file in the editor."
msgstr "Will open a text file in the editor."

#: flatcamEditors/FlatCAMTextEditor.py:86
msgid "Save Code"
msgstr "Save Code"

#: flatcamEditors/FlatCAMTextEditor.py:87
msgid "Will save the text in the editor into a file."
msgstr "Will save the text in the editor into a file."

#: flatcamEditors/FlatCAMTextEditor.py:89
msgid "Run Code"
msgstr "Run Code"

#: flatcamEditors/FlatCAMTextEditor.py:90
msgid "Will run the TCL commands found in the text file, one by one."
msgstr "Will run the TCL commands found in the text file, one by one."

#: flatcamEditors/FlatCAMTextEditor.py:165
msgid "Open file"
msgstr "Open file"

#: flatcamEditors/FlatCAMTextEditor.py:196
#: flatcamEditors/FlatCAMTextEditor.py:201
msgid "Export G-Code ..."
msgstr "Export G-Code ..."

#: flatcamEditors/FlatCAMTextEditor.py:204
msgid "Export Code cancelled."
msgstr "Export Code cancelled."

#: flatcamEditors/FlatCAMTextEditor.py:271
msgid "Code Editor content copied to clipboard ..."
msgstr "Code Editor content copied to clipboard ..."

#: flatcamGUI/FlatCAMGUI.py:46 flatcamGUI/FlatCAMGUI.py:48
#: flatcamGUI/FlatCAMGUI.py:1836
msgid "Toggle Panel"
msgstr "Toggle Panel"

#: flatcamGUI/FlatCAMGUI.py:58
msgid "File"
msgstr "File"

#: flatcamGUI/FlatCAMGUI.py:63
msgid "&New Project ...\tCTRL+N"
msgstr "&New Project ...\tCTRL+N"

#: flatcamGUI/FlatCAMGUI.py:65
msgid "Will create a new, blank project"
msgstr "Will create a new, blank project"

#: flatcamGUI/FlatCAMGUI.py:70
msgid "&New"
msgstr "&New"

#: flatcamGUI/FlatCAMGUI.py:73
msgid "Geometry\tN"
msgstr "Geometry\tN"

#: flatcamGUI/FlatCAMGUI.py:75
msgid "Will create a new, empty Geometry Object."
msgstr "Will create a new, empty Geometry Object."

#: flatcamGUI/FlatCAMGUI.py:77
msgid "Gerber\tB"
msgstr "Gerber\tB"

#: flatcamGUI/FlatCAMGUI.py:79
msgid "Will create a new, empty Gerber Object."
msgstr "Will create a new, empty Gerber Object."

#: flatcamGUI/FlatCAMGUI.py:81
msgid "Excellon\tL"
msgstr "Excellon\tL"

#: flatcamGUI/FlatCAMGUI.py:83
msgid "Will create a new, empty Excellon Object."
msgstr "Will create a new, empty Excellon Object."

#: flatcamGUI/FlatCAMGUI.py:87
msgid "Document\tD"
msgstr "Document\tD"

#: flatcamGUI/FlatCAMGUI.py:89
msgid "Will create a new, empty Document Object."
msgstr "Will create a new, empty Document Object."

#: flatcamGUI/FlatCAMGUI.py:92 flatcamGUI/FlatCAMGUI.py:3659
#: flatcamTools/ToolPcbWizard.py:61 flatcamTools/ToolPcbWizard.py:68
msgid "Open"
msgstr "Open"

#: flatcamGUI/FlatCAMGUI.py:96
msgid "Open &Project ..."
msgstr "Open &Project ..."

#: flatcamGUI/FlatCAMGUI.py:102 flatcamGUI/FlatCAMGUI.py:3668
msgid "Open &Gerber ...\tCTRL+G"
msgstr "Open &Gerber ...\tCTRL+G"

#: flatcamGUI/FlatCAMGUI.py:107 flatcamGUI/FlatCAMGUI.py:3673
msgid "Open &Excellon ...\tCTRL+E"
msgstr "Open &Excellon ...\tCTRL+E"

#: flatcamGUI/FlatCAMGUI.py:111 flatcamGUI/FlatCAMGUI.py:3677
msgid "Open G-&Code ..."
msgstr "Open G-&Code ..."

#: flatcamGUI/FlatCAMGUI.py:117
msgid "Open Config ..."
msgstr "Open Config ..."

#: flatcamGUI/FlatCAMGUI.py:121
msgid "Recent projects"
msgstr "Recent projects"

#: flatcamGUI/FlatCAMGUI.py:122
msgid "Recent files"
msgstr "Recent files"

#: flatcamGUI/FlatCAMGUI.py:128
msgid "Scripting"
msgstr "Scripting"

#: flatcamGUI/FlatCAMGUI.py:131 flatcamGUI/FlatCAMGUI.py:724
#: flatcamGUI/FlatCAMGUI.py:2140
msgid "New Script ..."
msgstr "New Script ..."

#: flatcamGUI/FlatCAMGUI.py:132 flatcamGUI/FlatCAMGUI.py:725
#: flatcamGUI/FlatCAMGUI.py:2141
msgid "Open Script ..."
msgstr "Open Script ..."

#: flatcamGUI/FlatCAMGUI.py:134 flatcamGUI/FlatCAMGUI.py:726
#: flatcamGUI/FlatCAMGUI.py:2142 flatcamGUI/FlatCAMGUI.py:3648
msgid "Run Script ..."
msgstr "Run Script ..."

#: flatcamGUI/FlatCAMGUI.py:136 flatcamGUI/FlatCAMGUI.py:3650
msgid ""
"Will run the opened Tcl Script thus\n"
"enabling the automation of certain\n"
"functions of FlatCAM."
msgstr ""
"Will run the opened Tcl Script thus\n"
"enabling the automation of certain\n"
"functions of FlatCAM."

#: flatcamGUI/FlatCAMGUI.py:149
msgid "Import"
msgstr "Import"

#: flatcamGUI/FlatCAMGUI.py:151
msgid "&SVG as Geometry Object ..."
msgstr "&SVG as Geometry Object ..."

#: flatcamGUI/FlatCAMGUI.py:154
msgid "&SVG as Gerber Object ..."
msgstr "&SVG as Gerber Object ..."

#: flatcamGUI/FlatCAMGUI.py:159
msgid "&DXF as Geometry Object ..."
msgstr "&DXF as Geometry Object ..."

#: flatcamGUI/FlatCAMGUI.py:162
msgid "&DXF as Gerber Object ..."
msgstr "&DXF as Gerber Object ..."

#: flatcamGUI/FlatCAMGUI.py:167
msgid "Export"
msgstr "Export"

#: flatcamGUI/FlatCAMGUI.py:170
msgid "Export &SVG ..."
msgstr "Export &SVG ..."

#: flatcamGUI/FlatCAMGUI.py:173
msgid "Export DXF ..."
msgstr "Export DXF ..."

#: flatcamGUI/FlatCAMGUI.py:178
msgid "Export &PNG ..."
msgstr "Export &PNG ..."

#: flatcamGUI/FlatCAMGUI.py:180
msgid ""
"Will export an image in PNG format,\n"
"the saved image will contain the visual \n"
"information currently in FlatCAM Plot Area."
msgstr ""
"Will export an image in PNG format,\n"
"the saved image will contain the visual \n"
"information currently in FlatCAM Plot Area."

#: flatcamGUI/FlatCAMGUI.py:189
msgid "Export &Excellon ..."
msgstr "Export &Excellon ..."

#: flatcamGUI/FlatCAMGUI.py:191
msgid ""
"Will export an Excellon Object as Excellon file,\n"
"the coordinates format, the file units and zeros\n"
"are set in Preferences -> Excellon Export."
msgstr ""
"Will export an Excellon Object as Excellon file,\n"
"the coordinates format, the file units and zeros\n"
"are set in Preferences -> Excellon Export."

#: flatcamGUI/FlatCAMGUI.py:198
msgid "Export &Gerber ..."
msgstr "Export &Gerber ..."

#: flatcamGUI/FlatCAMGUI.py:200
msgid ""
"Will export an Gerber Object as Gerber file,\n"
"the coordinates format, the file units and zeros\n"
"are set in Preferences -> Gerber Export."
msgstr ""
"Will export an Gerber Object as Gerber file,\n"
"the coordinates format, the file units and zeros\n"
"are set in Preferences -> Gerber Export."

#: flatcamGUI/FlatCAMGUI.py:216
msgid "Backup"
msgstr "Backup"

#: flatcamGUI/FlatCAMGUI.py:220
msgid "Import Preferences from file ..."
msgstr "Import Preferences from file ..."

#: flatcamGUI/FlatCAMGUI.py:225
msgid "Export Preferences to file ..."
msgstr "Export Preferences to file ..."

#: flatcamGUI/FlatCAMGUI.py:231 flatcamGUI/FlatCAMGUI.py:597
msgid "Save"
msgstr "Save"

#: flatcamGUI/FlatCAMGUI.py:234
msgid "&Save Project ..."
msgstr "&Save Project ..."

#: flatcamGUI/FlatCAMGUI.py:239
msgid "Save Project &As ...\tCTRL+S"
msgstr "Save Project &As ...\tCTRL+S"

#: flatcamGUI/FlatCAMGUI.py:244
msgid "Save Project C&opy ..."
msgstr "Save Project C&opy ..."

#: flatcamGUI/FlatCAMGUI.py:251
msgid "E&xit"
msgstr "E&xit"

#: flatcamGUI/FlatCAMGUI.py:259 flatcamGUI/FlatCAMGUI.py:594
#: flatcamGUI/FlatCAMGUI.py:1913
msgid "Edit"
msgstr "Edit"

#: flatcamGUI/FlatCAMGUI.py:262
msgid "Edit Object\tE"
msgstr "Edit Object\tE"

#: flatcamGUI/FlatCAMGUI.py:263
msgid "Close Editor\tCTRL+S"
msgstr "Close Editor\tCTRL+S"

#: flatcamGUI/FlatCAMGUI.py:271
msgid "Conversion"
msgstr "Conversion"

#: flatcamGUI/FlatCAMGUI.py:273
msgid "&Join Geo/Gerber/Exc -> Geo"
msgstr "&Join Geo/Gerber/Exc -> Geo"

#: flatcamGUI/FlatCAMGUI.py:275
msgid ""
"Merge a selection of objects, which can be of type:\n"
"- Gerber\n"
"- Excellon\n"
"- Geometry\n"
"into a new combo Geometry object."
msgstr ""
"Merge a selection of objects, which can be of type:\n"
"- Gerber\n"
"- Excellon\n"
"- Geometry\n"
"into a new combo Geometry object."

#: flatcamGUI/FlatCAMGUI.py:282
msgid "Join Excellon(s) -> Excellon"
msgstr "Join Excellon(s) -> Excellon"

#: flatcamGUI/FlatCAMGUI.py:284
msgid "Merge a selection of Excellon objects into a new combo Excellon object."
msgstr ""
"Merge a selection of Excellon objects into a new combo Excellon object."

#: flatcamGUI/FlatCAMGUI.py:287
msgid "Join Gerber(s) -> Gerber"
msgstr "Join Gerber(s) -> Gerber"

#: flatcamGUI/FlatCAMGUI.py:289
msgid "Merge a selection of Gerber objects into a new combo Gerber object."
msgstr "Merge a selection of Gerber objects into a new combo Gerber object."

#: flatcamGUI/FlatCAMGUI.py:294
msgid "Convert Single to MultiGeo"
msgstr "Convert Single to MultiGeo"

#: flatcamGUI/FlatCAMGUI.py:296
msgid ""
"Will convert a Geometry object from single_geometry type\n"
"to a multi_geometry type."
msgstr ""
"Will convert a Geometry object from single_geometry type\n"
"to a multi_geometry type."

#: flatcamGUI/FlatCAMGUI.py:300
msgid "Convert Multi to SingleGeo"
msgstr "Convert Multi to SingleGeo"

#: flatcamGUI/FlatCAMGUI.py:302
msgid ""
"Will convert a Geometry object from multi_geometry type\n"
"to a single_geometry type."
msgstr ""
"Will convert a Geometry object from multi_geometry type\n"
"to a single_geometry type."

#: flatcamGUI/FlatCAMGUI.py:308
msgid "Convert Any to Geo"
msgstr "Convert Any to Geo"

#: flatcamGUI/FlatCAMGUI.py:310
msgid "Convert Any to Gerber"
msgstr "Convert Any to Gerber"

#: flatcamGUI/FlatCAMGUI.py:315
msgid "&Copy\tCTRL+C"
msgstr "&Copy\tCTRL+C"

#: flatcamGUI/FlatCAMGUI.py:319
msgid "&Delete\tDEL"
msgstr "&Delete\tDEL"

#: flatcamGUI/FlatCAMGUI.py:323
msgid "Se&t Origin\tO"
msgstr "Se&t Origin\tO"

#: flatcamGUI/FlatCAMGUI.py:324
msgid "Jump to Location\tJ"
msgstr "Jump to Location\tJ"

#: flatcamGUI/FlatCAMGUI.py:329
msgid "Toggle Units\tQ"
msgstr "Toggle Units\tQ"

#: flatcamGUI/FlatCAMGUI.py:330
msgid "&Select All\tCTRL+A"
msgstr "&Select All\tCTRL+A"

#: flatcamGUI/FlatCAMGUI.py:334
msgid "&Preferences\tSHIFT+P"
msgstr "&Preferences\tSHIFT+P"

#: flatcamGUI/FlatCAMGUI.py:337 flatcamTools/ToolProperties.py:134
msgid "Options"
msgstr "Options"

#: flatcamGUI/FlatCAMGUI.py:352
msgid "&Rotate Selection\tSHIFT+(R)"
msgstr "&Rotate Selection\tSHIFT+(R)"

#: flatcamGUI/FlatCAMGUI.py:357
msgid "&Skew on X axis\tSHIFT+X"
msgstr "&Skew on X axis\tSHIFT+X"

#: flatcamGUI/FlatCAMGUI.py:359
msgid "S&kew on Y axis\tSHIFT+Y"
msgstr "S&kew on Y axis\tSHIFT+Y"

#: flatcamGUI/FlatCAMGUI.py:364
msgid "Flip on &X axis\tX"
msgstr "Flip on &X axis\tX"

#: flatcamGUI/FlatCAMGUI.py:366
msgid "Flip on &Y axis\tY"
msgstr "Flip on &Y axis\tY"

#: flatcamGUI/FlatCAMGUI.py:371
msgid "View source\tALT+S"
msgstr "View source\tALT+S"

#: flatcamGUI/FlatCAMGUI.py:378
msgid "&View"
msgstr "&View"

#: flatcamGUI/FlatCAMGUI.py:379
msgid "Enable all plots\tALT+1"
msgstr "Enable all plots\tALT+1"

#: flatcamGUI/FlatCAMGUI.py:381
msgid "Disable all plots\tALT+2"
msgstr "Disable all plots\tALT+2"

#: flatcamGUI/FlatCAMGUI.py:383
msgid "Disable non-selected\tALT+3"
msgstr "Disable non-selected\tALT+3"

#: flatcamGUI/FlatCAMGUI.py:386
msgid "&Zoom Fit\tV"
msgstr "&Zoom Fit\tV"

#: flatcamGUI/FlatCAMGUI.py:387
msgid "&Zoom In\t="
msgstr "&Zoom In\t="

#: flatcamGUI/FlatCAMGUI.py:388
msgid "&Zoom Out\t-"
msgstr "&Zoom Out\t-"

#: flatcamGUI/FlatCAMGUI.py:392
msgid "Redraw All\tF5"
msgstr "Redraw All\tF5"

#: flatcamGUI/FlatCAMGUI.py:396
msgid "Toggle Code Editor\tSHIFT+E"
msgstr "Toggle Code Editor\tSHIFT+E"

#: flatcamGUI/FlatCAMGUI.py:399
msgid "&Toggle FullScreen\tALT+F10"
msgstr "&Toggle FullScreen\tALT+F10"

#: flatcamGUI/FlatCAMGUI.py:401
msgid "&Toggle Plot Area\tCTRL+F10"
msgstr "&Toggle Plot Area\tCTRL+F10"

#: flatcamGUI/FlatCAMGUI.py:403
msgid "&Toggle Project/Sel/Tool\t`"
msgstr "&Toggle Project/Sel/Tool\t`"

#: flatcamGUI/FlatCAMGUI.py:407
msgid "&Toggle Grid Snap\tG"
msgstr "&Toggle Grid Snap\tG"

#: flatcamGUI/FlatCAMGUI.py:409
msgid "&Toggle Grid Lines\tALT+G"
msgstr "&Toggle Grid Lines\tALT+G"

#: flatcamGUI/FlatCAMGUI.py:410
msgid "&Toggle Axis\tSHIFT+G"
msgstr "&Toggle Axis\tSHIFT+G"

#: flatcamGUI/FlatCAMGUI.py:413
msgid "Toggle Workspace\tSHIFT+W"
msgstr "Toggle Workspace\tSHIFT+W"

#: flatcamGUI/FlatCAMGUI.py:418
msgid "Objects"
msgstr "Objects"

#: flatcamGUI/FlatCAMGUI.py:423
msgid "&Tool"
msgstr "&Tool"

#: flatcamGUI/FlatCAMGUI.py:425
msgid "&Command Line\tS"
msgstr "&Command Line\tS"

#: flatcamGUI/FlatCAMGUI.py:430
msgid "Help"
msgstr "Help"

#: flatcamGUI/FlatCAMGUI.py:431
msgid "Online Help\tF1"
msgstr "Online Help\tF1"

#: flatcamGUI/FlatCAMGUI.py:433
msgid "Bookmarks"
msgstr "Bookmarks"

#: flatcamGUI/FlatCAMGUI.py:439
msgid "Report a bug"
msgstr "Report a bug"

#: flatcamGUI/FlatCAMGUI.py:442
msgid "Excellon Specification"
msgstr "Excellon Specification"

#: flatcamGUI/FlatCAMGUI.py:444
msgid "Gerber Specification"
msgstr "Gerber Specification"

#: flatcamGUI/FlatCAMGUI.py:449
msgid "Shortcuts List\tF3"
msgstr "Shortcuts List\tF3"

#: flatcamGUI/FlatCAMGUI.py:450
msgid "YouTube Channel\tF4"
msgstr "YouTube Channel\tF4"

#: flatcamGUI/FlatCAMGUI.py:461
msgid "Add Circle\tO"
msgstr "Add Circle\tO"

#: flatcamGUI/FlatCAMGUI.py:463
msgid "Add Arc\tA"
msgstr "Add Arc\tA"

#: flatcamGUI/FlatCAMGUI.py:466
msgid "Add Rectangle\tR"
msgstr "Add Rectangle\tR"

#: flatcamGUI/FlatCAMGUI.py:469
msgid "Add Polygon\tN"
msgstr "Add Polygon\tN"

#: flatcamGUI/FlatCAMGUI.py:471
msgid "Add Path\tP"
msgstr "Add Path\tP"

#: flatcamGUI/FlatCAMGUI.py:473
msgid "Add Text\tT"
msgstr "Add Text\tT"

#: flatcamGUI/FlatCAMGUI.py:476
msgid "Polygon Union\tU"
msgstr "Polygon Union\tU"

#: flatcamGUI/FlatCAMGUI.py:478
msgid "Polygon Intersection\tE"
msgstr "Polygon Intersection\tE"

#: flatcamGUI/FlatCAMGUI.py:480
msgid "Polygon Subtraction\tS"
msgstr "Polygon Subtraction\tS"

#: flatcamGUI/FlatCAMGUI.py:484
msgid "Cut Path\tX"
msgstr "Cut Path\tX"

#: flatcamGUI/FlatCAMGUI.py:486
msgid "Copy Geom\tC"
msgstr "Copy Geom\tC"

#: flatcamGUI/FlatCAMGUI.py:488
msgid "Delete Shape\tDEL"
msgstr "Delete Shape\tDEL"

#: flatcamGUI/FlatCAMGUI.py:491 flatcamGUI/FlatCAMGUI.py:573
msgid "Move\tM"
msgstr "Move\tM"

#: flatcamGUI/FlatCAMGUI.py:493
msgid "Buffer Tool\tB"
msgstr "Buffer Tool\tB"

#: flatcamGUI/FlatCAMGUI.py:496
msgid "Paint Tool\tI"
msgstr "Paint Tool\tI"

#: flatcamGUI/FlatCAMGUI.py:499
msgid "Transform Tool\tALT+R"
msgstr "Transform Tool\tALT+R"

#: flatcamGUI/FlatCAMGUI.py:503
msgid "Toggle Corner Snap\tK"
msgstr "Toggle Corner Snap\tK"

#: flatcamGUI/FlatCAMGUI.py:509
msgid ">Excellon Editor<"
msgstr ">Excellon Editor<"

#: flatcamGUI/FlatCAMGUI.py:513
msgid "Add Drill Array\tA"
msgstr "Add Drill Array\tA"

#: flatcamGUI/FlatCAMGUI.py:515
msgid "Add Drill\tD"
msgstr "Add Drill\tD"

#: flatcamGUI/FlatCAMGUI.py:519
msgid "Add Slot Array\tQ"
msgstr "Add Slot Array\tQ"

#: flatcamGUI/FlatCAMGUI.py:521
msgid "Add Slot\tW"
msgstr "Add Slot\tW"

#: flatcamGUI/FlatCAMGUI.py:525
msgid "Resize Drill(S)\tR"
msgstr "Resize Drill(S)\tR"

#: flatcamGUI/FlatCAMGUI.py:527 flatcamGUI/FlatCAMGUI.py:568
msgid "Copy\tC"
msgstr "Copy\tC"

#: flatcamGUI/FlatCAMGUI.py:529 flatcamGUI/FlatCAMGUI.py:570
msgid "Delete\tDEL"
msgstr "Delete\tDEL"

#: flatcamGUI/FlatCAMGUI.py:534
msgid "Move Drill(s)\tM"
msgstr "Move Drill(s)\tM"

#: flatcamGUI/FlatCAMGUI.py:539
msgid ">Gerber Editor<"
msgstr ">Gerber Editor<"

#: flatcamGUI/FlatCAMGUI.py:543
msgid "Add Pad\tP"
msgstr "Add Pad\tP"

#: flatcamGUI/FlatCAMGUI.py:545
msgid "Add Pad Array\tA"
msgstr "Add Pad Array\tA"

#: flatcamGUI/FlatCAMGUI.py:547
msgid "Add Track\tT"
msgstr "Add Track\tT"

#: flatcamGUI/FlatCAMGUI.py:549
msgid "Add Region\tN"
msgstr "Add Region\tN"

#: flatcamGUI/FlatCAMGUI.py:553
msgid "Poligonize\tALT+N"
msgstr "Poligonize\tALT+N"

#: flatcamGUI/FlatCAMGUI.py:555
msgid "Add SemiDisc\tE"
msgstr "Add SemiDisc\tE"

#: flatcamGUI/FlatCAMGUI.py:556
msgid "Add Disc\tD"
msgstr "Add Disc\tD"

#: flatcamGUI/FlatCAMGUI.py:558
msgid "Buffer\tB"
msgstr "Buffer\tB"

#: flatcamGUI/FlatCAMGUI.py:559
msgid "Scale\tS"
msgstr "Scale\tS"

#: flatcamGUI/FlatCAMGUI.py:561
msgid "Mark Area\tALT+A"
msgstr "Mark Area\tALT+A"

#: flatcamGUI/FlatCAMGUI.py:563
msgid "Eraser\tCTRL+E"
msgstr "Eraser\tCTRL+E"

#: flatcamGUI/FlatCAMGUI.py:565
msgid "Transform\tALT+R"
msgstr "Transform\tALT+R"

#: flatcamGUI/FlatCAMGUI.py:588
msgid "Enable Plot"
msgstr "Enable Plot"

#: flatcamGUI/FlatCAMGUI.py:589
msgid "Disable Plot"
msgstr "Disable Plot"

#: flatcamGUI/FlatCAMGUI.py:591
msgid "Generate CNC"
msgstr "Generate CNC"

#: flatcamGUI/FlatCAMGUI.py:592
msgid "View Source"
msgstr "View Source"

#: flatcamGUI/FlatCAMGUI.py:600 flatcamGUI/FlatCAMGUI.py:1919
#: flatcamTools/ToolProperties.py:23
msgid "Properties"
msgstr "Properties"

#: flatcamGUI/FlatCAMGUI.py:629
msgid "File Toolbar"
msgstr "File Toolbar"

#: flatcamGUI/FlatCAMGUI.py:633
msgid "Edit Toolbar"
msgstr "Edit Toolbar"

#: flatcamGUI/FlatCAMGUI.py:637
msgid "View Toolbar"
msgstr "View Toolbar"

#: flatcamGUI/FlatCAMGUI.py:641
msgid "Shell Toolbar"
msgstr "Shell Toolbar"

#: flatcamGUI/FlatCAMGUI.py:645
msgid "Tools Toolbar"
msgstr "Tools Toolbar"

#: flatcamGUI/FlatCAMGUI.py:649
msgid "Excellon Editor Toolbar"
msgstr "Excellon Editor Toolbar"

#: flatcamGUI/FlatCAMGUI.py:655
msgid "Geometry Editor Toolbar"
msgstr "Geometry Editor Toolbar"

#: flatcamGUI/FlatCAMGUI.py:659
msgid "Gerber Editor Toolbar"
msgstr "Gerber Editor Toolbar"

#: flatcamGUI/FlatCAMGUI.py:663
msgid "Grid Toolbar"
msgstr "Grid Toolbar"

#: flatcamGUI/FlatCAMGUI.py:684 flatcamGUI/FlatCAMGUI.py:2108
msgid "Open project"
msgstr "Open project"

#: flatcamGUI/FlatCAMGUI.py:685 flatcamGUI/FlatCAMGUI.py:2109
msgid "Save project"
msgstr "Save project"

#: flatcamGUI/FlatCAMGUI.py:690 flatcamGUI/FlatCAMGUI.py:2112
msgid "New Blank Geometry"
msgstr "New Blank Geometry"

#: flatcamGUI/FlatCAMGUI.py:691
msgid "New Blank Gerber"
msgstr "New Blank Gerber"

#: flatcamGUI/FlatCAMGUI.py:692 flatcamGUI/FlatCAMGUI.py:2113
msgid "New Blank Excellon"
msgstr "New Blank Excellon"

#: flatcamGUI/FlatCAMGUI.py:696 flatcamGUI/FlatCAMGUI.py:2117
msgid "Save Object and close the Editor"
msgstr "Save Object and close the Editor"

#: flatcamGUI/FlatCAMGUI.py:700 flatcamGUI/FlatCAMGUI.py:2121
msgid "&Delete"
msgstr "&Delete"

#: flatcamGUI/FlatCAMGUI.py:702 flatcamGUI/FlatCAMGUI.py:1422
#: flatcamGUI/FlatCAMGUI.py:1610 flatcamGUI/FlatCAMGUI.py:2123
#: flatcamTools/ToolDistance.py:25 flatcamTools/ToolDistance.py:155
msgid "Distance Tool"
msgstr "Distance Tool"

#: flatcamGUI/FlatCAMGUI.py:704 flatcamGUI/FlatCAMGUI.py:2125
msgid "Distance Min Tool"
msgstr "Distance Min Tool"

#: flatcamGUI/FlatCAMGUI.py:705 flatcamGUI/FlatCAMGUI.py:1418
#: flatcamGUI/FlatCAMGUI.py:2126
msgid "Set Origin"
msgstr "Set Origin"

#: flatcamGUI/FlatCAMGUI.py:706 flatcamGUI/FlatCAMGUI.py:2127
msgid "Jump to Location"
msgstr "Jump to Location"

#: flatcamGUI/FlatCAMGUI.py:712 flatcamGUI/FlatCAMGUI.py:2130
msgid "&Replot"
msgstr "&Replot"

#: flatcamGUI/FlatCAMGUI.py:713 flatcamGUI/FlatCAMGUI.py:2131
msgid "&Clear plot"
msgstr "&Clear plot"

#: flatcamGUI/FlatCAMGUI.py:714 flatcamGUI/FlatCAMGUI.py:1421
#: flatcamGUI/FlatCAMGUI.py:2132
msgid "Zoom In"
msgstr "Zoom In"

#: flatcamGUI/FlatCAMGUI.py:715 flatcamGUI/FlatCAMGUI.py:1421
#: flatcamGUI/FlatCAMGUI.py:2133
msgid "Zoom Out"
msgstr "Zoom Out"

#: flatcamGUI/FlatCAMGUI.py:716 flatcamGUI/FlatCAMGUI.py:1420
#: flatcamGUI/FlatCAMGUI.py:1850 flatcamGUI/FlatCAMGUI.py:2134
msgid "Zoom Fit"
msgstr "Zoom Fit"

#: flatcamGUI/FlatCAMGUI.py:723 flatcamGUI/FlatCAMGUI.py:2139
msgid "&Command Line"
msgstr "&Command Line"

#: flatcamGUI/FlatCAMGUI.py:731 flatcamGUI/FlatCAMGUI.py:2145
msgid "2Sided Tool"
msgstr "2Sided Tool"

#: flatcamGUI/FlatCAMGUI.py:732 flatcamGUI/ObjectUI.py:553
#: flatcamTools/ToolCutOut.py:362
msgid "Cutout Tool"
msgstr "Cutout Tool"

#: flatcamGUI/FlatCAMGUI.py:733 flatcamGUI/FlatCAMGUI.py:2147
#: flatcamGUI/ObjectUI.py:537 flatcamTools/ToolNonCopperClear.py:591
msgid "NCC Tool"
msgstr "NCC Tool"

#: flatcamGUI/FlatCAMGUI.py:737 flatcamGUI/FlatCAMGUI.py:2151
msgid "Panel Tool"
msgstr "Panel Tool"

#: flatcamGUI/FlatCAMGUI.py:738 flatcamGUI/FlatCAMGUI.py:2152
#: flatcamTools/ToolFilm.py:418
msgid "Film Tool"
msgstr "Film Tool"

#: flatcamGUI/FlatCAMGUI.py:739 flatcamGUI/FlatCAMGUI.py:2154
#: flatcamTools/ToolSolderPaste.py:457
msgid "SolderPaste Tool"
msgstr "SolderPaste Tool"

#: flatcamGUI/FlatCAMGUI.py:740 flatcamGUI/FlatCAMGUI.py:2155
#: flatcamTools/ToolSub.py:27
msgid "Substract Tool"
msgstr "Substract Tool"

#: flatcamGUI/FlatCAMGUI.py:741 flatcamTools/ToolRulesCheck.py:582
msgid "Rules Tool"
msgstr "Rules Tool"

#: flatcamGUI/FlatCAMGUI.py:742 flatcamGUI/FlatCAMGUI.py:1428
#: flatcamTools/ToolOptimal.py:26 flatcamTools/ToolOptimal.py:270
msgid "Optimal Tool"
msgstr "Optimal Tool"

#: flatcamGUI/FlatCAMGUI.py:746 flatcamGUI/FlatCAMGUI.py:1426
#: flatcamGUI/FlatCAMGUI.py:2160
msgid "Calculators Tool"
msgstr "Calculators Tool"

#: flatcamGUI/FlatCAMGUI.py:752 flatcamGUI/FlatCAMGUI.py:771
#: flatcamGUI/FlatCAMGUI.py:809 flatcamGUI/FlatCAMGUI.py:2164
#: flatcamGUI/FlatCAMGUI.py:2219
msgid "Select"
msgstr "Select"

#: flatcamGUI/FlatCAMGUI.py:753 flatcamGUI/FlatCAMGUI.py:2165
msgid "Add Drill Hole"
msgstr "Add Drill Hole"

#: flatcamGUI/FlatCAMGUI.py:755 flatcamGUI/FlatCAMGUI.py:2167
msgid "Add Drill Hole Array"
msgstr "Add Drill Hole Array"

#: flatcamGUI/FlatCAMGUI.py:756 flatcamGUI/FlatCAMGUI.py:1695
#: flatcamGUI/FlatCAMGUI.py:1905 flatcamGUI/FlatCAMGUI.py:2169
msgid "Add Slot"
msgstr "Add Slot"

#: flatcamGUI/FlatCAMGUI.py:758 flatcamGUI/FlatCAMGUI.py:1694
#: flatcamGUI/FlatCAMGUI.py:1906 flatcamGUI/FlatCAMGUI.py:2171
msgid "Add Slot Array"
msgstr "Add Slot Array"

#: flatcamGUI/FlatCAMGUI.py:759 flatcamGUI/FlatCAMGUI.py:1908
#: flatcamGUI/FlatCAMGUI.py:2168
msgid "Resize Drill"
msgstr "Resize Drill"

#: flatcamGUI/FlatCAMGUI.py:762 flatcamGUI/FlatCAMGUI.py:2174
msgid "Copy Drill"
msgstr "Copy Drill"

#: flatcamGUI/FlatCAMGUI.py:763 flatcamGUI/FlatCAMGUI.py:2176
msgid "Delete Drill"
msgstr "Delete Drill"

#: flatcamGUI/FlatCAMGUI.py:766 flatcamGUI/FlatCAMGUI.py:2179
msgid "Move Drill"
msgstr "Move Drill"

#: flatcamGUI/FlatCAMGUI.py:772 flatcamGUI/FlatCAMGUI.py:2183
msgid "Add Circle"
msgstr "Add Circle"

#: flatcamGUI/FlatCAMGUI.py:773 flatcamGUI/FlatCAMGUI.py:2184
msgid "Add Arc"
msgstr "Add Arc"

#: flatcamGUI/FlatCAMGUI.py:775 flatcamGUI/FlatCAMGUI.py:2186
msgid "Add Rectangle"
msgstr "Add Rectangle"

#: flatcamGUI/FlatCAMGUI.py:778 flatcamGUI/FlatCAMGUI.py:2189
msgid "Add Path"
msgstr "Add Path"

#: flatcamGUI/FlatCAMGUI.py:779 flatcamGUI/FlatCAMGUI.py:2191
msgid "Add Polygon"
msgstr "Add Polygon"

#: flatcamGUI/FlatCAMGUI.py:781 flatcamGUI/FlatCAMGUI.py:2193
msgid "Add Text"
msgstr "Add Text"

#: flatcamGUI/FlatCAMGUI.py:782 flatcamGUI/FlatCAMGUI.py:2194
msgid "Add Buffer"
msgstr "Add Buffer"

#: flatcamGUI/FlatCAMGUI.py:783 flatcamGUI/FlatCAMGUI.py:2195
msgid "Paint Shape"
msgstr "Paint Shape"

#: flatcamGUI/FlatCAMGUI.py:784 flatcamGUI/FlatCAMGUI.py:826
#: flatcamGUI/FlatCAMGUI.py:1867 flatcamGUI/FlatCAMGUI.py:1895
#: flatcamGUI/FlatCAMGUI.py:2196 flatcamGUI/FlatCAMGUI.py:2235
msgid "Eraser"
msgstr "Eraser"

#: flatcamGUI/FlatCAMGUI.py:787 flatcamGUI/FlatCAMGUI.py:2199
msgid "Polygon Union"
msgstr "Polygon Union"

#: flatcamGUI/FlatCAMGUI.py:788 flatcamGUI/FlatCAMGUI.py:2200
msgid "Polygon Explode"
msgstr "Polygon Explode"

#: flatcamGUI/FlatCAMGUI.py:791 flatcamGUI/FlatCAMGUI.py:2203
msgid "Polygon Intersection"
msgstr "Polygon Intersection"

#: flatcamGUI/FlatCAMGUI.py:793 flatcamGUI/FlatCAMGUI.py:2205
msgid "Polygon Subtraction"
msgstr "Polygon Subtraction"

#: flatcamGUI/FlatCAMGUI.py:796 flatcamGUI/FlatCAMGUI.py:2208
msgid "Cut Path"
msgstr "Cut Path"

#: flatcamGUI/FlatCAMGUI.py:797
msgid "Copy Shape(s)"
msgstr "Copy Shape(s)"

#: flatcamGUI/FlatCAMGUI.py:800
msgid "Delete Shape '-'"
msgstr "Delete Shape '-'"

#: flatcamGUI/FlatCAMGUI.py:802 flatcamGUI/FlatCAMGUI.py:833
#: flatcamGUI/FlatCAMGUI.py:1874 flatcamGUI/FlatCAMGUI.py:1899
#: flatcamGUI/FlatCAMGUI.py:2213 flatcamGUI/FlatCAMGUI.py:2242
msgid "Transformations"
msgstr "Transformations"

#: flatcamGUI/FlatCAMGUI.py:804
msgid "Move Objects "
msgstr "Move Objects "

#: flatcamGUI/FlatCAMGUI.py:810 flatcamGUI/FlatCAMGUI.py:1814
#: flatcamGUI/FlatCAMGUI.py:2220
msgid "Add Pad"
msgstr "Add Pad"

#: flatcamGUI/FlatCAMGUI.py:812 flatcamGUI/FlatCAMGUI.py:1815
#: flatcamGUI/FlatCAMGUI.py:2222
msgid "Add Track"
msgstr "Add Track"

#: flatcamGUI/FlatCAMGUI.py:813 flatcamGUI/FlatCAMGUI.py:1814
#: flatcamGUI/FlatCAMGUI.py:2223
msgid "Add Region"
msgstr "Add Region"

#: flatcamGUI/FlatCAMGUI.py:815 flatcamGUI/FlatCAMGUI.py:1887
#: flatcamGUI/FlatCAMGUI.py:2225
msgid "Poligonize"
msgstr "Poligonize"

#: flatcamGUI/FlatCAMGUI.py:817 flatcamGUI/FlatCAMGUI.py:1888
#: flatcamGUI/FlatCAMGUI.py:2227
msgid "SemiDisc"
msgstr "SemiDisc"

#: flatcamGUI/FlatCAMGUI.py:818 flatcamGUI/FlatCAMGUI.py:1889
#: flatcamGUI/FlatCAMGUI.py:2228
msgid "Disc"
msgstr "Disc"

#: flatcamGUI/FlatCAMGUI.py:824 flatcamGUI/FlatCAMGUI.py:1894
#: flatcamGUI/FlatCAMGUI.py:2234
msgid "Mark Area"
msgstr "Mark Area"

#: flatcamGUI/FlatCAMGUI.py:835 flatcamGUI/FlatCAMGUI.py:1814
#: flatcamGUI/FlatCAMGUI.py:1877 flatcamGUI/FlatCAMGUI.py:1918
#: flatcamGUI/FlatCAMGUI.py:2244 flatcamTools/ToolMove.py:25
msgid "Move"
msgstr "Move"

#: flatcamGUI/FlatCAMGUI.py:842 flatcamGUI/FlatCAMGUI.py:2250
msgid "Snap to grid"
msgstr "Snap to grid"

#: flatcamGUI/FlatCAMGUI.py:845 flatcamGUI/FlatCAMGUI.py:2253
msgid "Grid X snapping distance"
msgstr "Grid X snapping distance"

#: flatcamGUI/FlatCAMGUI.py:850 flatcamGUI/FlatCAMGUI.py:2258
msgid "Grid Y snapping distance"
msgstr "Grid Y snapping distance"

#: flatcamGUI/FlatCAMGUI.py:856 flatcamGUI/FlatCAMGUI.py:2264
msgid ""
"When active, value on Grid_X\n"
"is copied to the Grid_Y value."
msgstr ""
"When active, value on Grid_X\n"
"is copied to the Grid_Y value."

#: flatcamGUI/FlatCAMGUI.py:862 flatcamGUI/FlatCAMGUI.py:2270
msgid "Snap to corner"
msgstr "Snap to corner"

#: flatcamGUI/FlatCAMGUI.py:866 flatcamGUI/FlatCAMGUI.py:2274
#: flatcamGUI/PreferencesUI.py:323
msgid "Max. magnet distance"
msgstr "Max. magnet distance"

#: flatcamGUI/FlatCAMGUI.py:888 flatcamGUI/FlatCAMGUI.py:1844
msgid "Project"
msgstr "Project"

#: flatcamGUI/FlatCAMGUI.py:900
msgid "Selected"
msgstr "Selected"

#: flatcamGUI/FlatCAMGUI.py:927 flatcamGUI/FlatCAMGUI.py:935
msgid "Plot Area"
msgstr "Plot Area"

#: flatcamGUI/FlatCAMGUI.py:961
msgid "General"
msgstr "General"

#: flatcamGUI/FlatCAMGUI.py:970
msgid "APP.  DEFAULTS"
msgstr "APP.  DEFAULTS"

#: flatcamGUI/FlatCAMGUI.py:971
msgid "PROJ. OPTIONS "
msgstr "PROJ. OPTIONS "

#: flatcamGUI/FlatCAMGUI.py:983 flatcamTools/ToolDblSided.py:48
#: flatcamTools/ToolOptimal.py:63
msgid "GERBER"
msgstr "GERBER"

#: flatcamGUI/FlatCAMGUI.py:993 flatcamTools/ToolDblSided.py:72
msgid "EXCELLON"
msgstr "EXCELLON"

#: flatcamGUI/FlatCAMGUI.py:1003 flatcamTools/ToolDblSided.py:96
msgid "GEOMETRY"
msgstr "GEOMETRY"

#: flatcamGUI/FlatCAMGUI.py:1013
msgid "CNC-JOB"
msgstr "CNC-JOB"

#: flatcamGUI/FlatCAMGUI.py:1022 flatcamGUI/ObjectUI.py:526
msgid "TOOLS"
msgstr "TOOLS"

#: flatcamGUI/FlatCAMGUI.py:1031
msgid "TOOLS 2"
msgstr "TOOLS 2"

#: flatcamGUI/FlatCAMGUI.py:1041
msgid "UTILITIES"
msgstr "UTILITIES"

#: flatcamGUI/FlatCAMGUI.py:1058
msgid "Import Preferences"
msgstr "Import Preferences"

#: flatcamGUI/FlatCAMGUI.py:1061
msgid ""
"Import a full set of FlatCAM settings from a file\n"
"previously saved on HDD.\n"
"\n"
"FlatCAM automatically save a 'factory_defaults' file\n"
"on the first start. Do not delete that file."
msgstr ""
"Import a full set of FlatCAM settings from a file\n"
"previously saved on HDD.\n"
"\n"
"FlatCAM automatically save a 'factory_defaults' file\n"
"on the first start. Do not delete that file."

#: flatcamGUI/FlatCAMGUI.py:1068
msgid "Export Preferences"
msgstr "Export Preferences"

#: flatcamGUI/FlatCAMGUI.py:1071
msgid ""
"Export a full set of FlatCAM settings in a file\n"
"that is saved on HDD."
msgstr ""
"Export a full set of FlatCAM settings in a file\n"
"that is saved on HDD."

#: flatcamGUI/FlatCAMGUI.py:1076
msgid "Open Pref Folder"
msgstr "Open Pref Folder"

#: flatcamGUI/FlatCAMGUI.py:1079
msgid "Open the folder where FlatCAM save the preferences files."
msgstr "Open the folder where FlatCAM save the preferences files."

#: flatcamGUI/FlatCAMGUI.py:1090
msgid ""
"Save the current settings in the 'current_defaults' file\n"
"which is the file storing the working default preferences."
msgstr ""
"Save the current settings in the 'current_defaults' file\n"
"which is the file storing the working default preferences."

#: flatcamGUI/FlatCAMGUI.py:1415
msgid "SHOW SHORTCUT LIST"
msgstr "SHOW SHORTCUT LIST"

#: flatcamGUI/FlatCAMGUI.py:1415
msgid "Switch to Project Tab"
msgstr "Switch to Project Tab"

#: flatcamGUI/FlatCAMGUI.py:1415
msgid "Switch to Selected Tab"
msgstr "Switch to Selected Tab"

#: flatcamGUI/FlatCAMGUI.py:1416
msgid "Switch to Tool Tab"
msgstr "Switch to Tool Tab"

#: flatcamGUI/FlatCAMGUI.py:1417
msgid "New Gerber"
msgstr "New Gerber"

#: flatcamGUI/FlatCAMGUI.py:1417
msgid "Edit Object (if selected)"
msgstr "Edit Object (if selected)"

#: flatcamGUI/FlatCAMGUI.py:1417
msgid "Jump to Coordinates"
msgstr "Jump to Coordinates"

#: flatcamGUI/FlatCAMGUI.py:1418
msgid "New Excellon"
msgstr "New Excellon"

#: flatcamGUI/FlatCAMGUI.py:1418
msgid "Move Obj"
msgstr "Move Obj"

#: flatcamGUI/FlatCAMGUI.py:1418
msgid "New Geometry"
msgstr "New Geometry"

#: flatcamGUI/FlatCAMGUI.py:1418
msgid "Change Units"
msgstr "Change Units"

#: flatcamGUI/FlatCAMGUI.py:1419
msgid "Open Properties Tool"
msgstr "Open Properties Tool"

#: flatcamGUI/FlatCAMGUI.py:1419
msgid "Rotate by 90 degree CW"
msgstr "Rotate by 90 degree CW"

#: flatcamGUI/FlatCAMGUI.py:1419
msgid "Shell Toggle"
msgstr "Shell Toggle"

#: flatcamGUI/FlatCAMGUI.py:1420
msgid ""
"Add a Tool (when in Geometry Selected Tab or in Tools NCC or Tools Paint)"
msgstr ""
"Add a Tool (when in Geometry Selected Tab or in Tools NCC or Tools Paint)"

#: flatcamGUI/FlatCAMGUI.py:1421
msgid "Flip on X_axis"
msgstr "Flip on X_axis"

#: flatcamGUI/FlatCAMGUI.py:1421
msgid "Flip on Y_axis"
msgstr "Flip on Y_axis"

#: flatcamGUI/FlatCAMGUI.py:1421
msgid "Select All"
msgstr "Select All"

#: flatcamGUI/FlatCAMGUI.py:1421
msgid "Copy Obj"
msgstr "Copy Obj"

#: flatcamGUI/FlatCAMGUI.py:1422
msgid "Open Excellon File"
msgstr "Open Excellon File"

#: flatcamGUI/FlatCAMGUI.py:1422
msgid "Open Gerber File"
msgstr "Open Gerber File"

#: flatcamGUI/FlatCAMGUI.py:1422
msgid "New Project"
msgstr "New Project"

#: flatcamGUI/FlatCAMGUI.py:1423
msgid "Save Project As"
msgstr "Save Project As"

#: flatcamGUI/FlatCAMGUI.py:1423
msgid "Toggle Plot Area"
msgstr "Toggle Plot Area"

#: flatcamGUI/FlatCAMGUI.py:1423
msgid "Copy Obj_Name"
msgstr "Copy Obj_Name"

#: flatcamGUI/FlatCAMGUI.py:1424
msgid "Toggle Code Editor"
msgstr "Toggle Code Editor"

#: flatcamGUI/FlatCAMGUI.py:1424
msgid "Toggle the axis"
msgstr "Toggle the axis"

#: flatcamGUI/FlatCAMGUI.py:1424 flatcamGUI/FlatCAMGUI.py:1608
#: flatcamGUI/FlatCAMGUI.py:1695 flatcamGUI/FlatCAMGUI.py:1817
msgid "Distance Minimum Tool"
msgstr "Distance Minimum Tool"

#: flatcamGUI/FlatCAMGUI.py:1424
msgid "Open Preferences Window"
msgstr "Open Preferences Window"

#: flatcamGUI/FlatCAMGUI.py:1425
msgid "Rotate by 90 degree CCW"
msgstr "Rotate by 90 degree CCW"

#: flatcamGUI/FlatCAMGUI.py:1425
msgid "Run a Script"
msgstr "Run a Script"

#: flatcamGUI/FlatCAMGUI.py:1425
msgid "Toggle the workspace"
msgstr "Toggle the workspace"

#: flatcamGUI/FlatCAMGUI.py:1425
msgid "Skew on X axis"
msgstr "Skew on X axis"

#: flatcamGUI/FlatCAMGUI.py:1426
msgid "Skew on Y axis"
msgstr "Skew on Y axis"

#: flatcamGUI/FlatCAMGUI.py:1426
msgid "2-Sided PCB Tool"
msgstr "2-Sided PCB Tool"

#: flatcamGUI/FlatCAMGUI.py:1426
msgid "Transformations Tool"
msgstr "Transformations Tool"

#: flatcamGUI/FlatCAMGUI.py:1427
msgid "Solder Paste Dispensing Tool"
msgstr "Solder Paste Dispensing Tool"

#: flatcamGUI/FlatCAMGUI.py:1428
msgid "Film PCB Tool"
msgstr "Film PCB Tool"

#: flatcamGUI/FlatCAMGUI.py:1428
msgid "Non-Copper Clearing Tool"
msgstr "Non-Copper Clearing Tool"

#: flatcamGUI/FlatCAMGUI.py:1429
msgid "Paint Area Tool"
msgstr "Paint Area Tool"

#: flatcamGUI/FlatCAMGUI.py:1429 flatcamTools/ToolPDF.py:37
msgid "PDF Import Tool"
msgstr "PDF Import Tool"

#: flatcamGUI/FlatCAMGUI.py:1429
msgid "Rules Check Tool"
msgstr "Rules Check Tool"

#: flatcamGUI/FlatCAMGUI.py:1430
msgid "View File Source"
msgstr "View File Source"

#: flatcamGUI/FlatCAMGUI.py:1431
msgid "Cutout PCB Tool"
msgstr "Cutout PCB Tool"

#: flatcamGUI/FlatCAMGUI.py:1431
msgid "Enable all Plots"
msgstr "Enable all Plots"

#: flatcamGUI/FlatCAMGUI.py:1431
msgid "Disable all Plots"
msgstr "Disable all Plots"

#: flatcamGUI/FlatCAMGUI.py:1431
msgid "Disable Non-selected Plots"
msgstr "Disable Non-selected Plots"

#: flatcamGUI/FlatCAMGUI.py:1432
msgid "Toggle Full Screen"
msgstr "Toggle Full Screen"

#: flatcamGUI/FlatCAMGUI.py:1432
msgid "Abort current task (gracefully)"
msgstr "Abort current task (gracefully)"

#: flatcamGUI/FlatCAMGUI.py:1432
msgid "Open Online Manual"
msgstr "Open Online Manual"

#: flatcamGUI/FlatCAMGUI.py:1433
msgid "Open Online Tutorials"
msgstr "Open Online Tutorials"

#: flatcamGUI/FlatCAMGUI.py:1433
msgid "Refresh Plots"
msgstr "Refresh Plots"

#: flatcamGUI/FlatCAMGUI.py:1433 flatcamTools/ToolSolderPaste.py:414
msgid "Delete Object"
msgstr "Delete Object"

#: flatcamGUI/FlatCAMGUI.py:1433
msgid "Alternate: Delete Tool"
msgstr "Alternate: Delete Tool"

#: flatcamGUI/FlatCAMGUI.py:1434
msgid "(left to Key_1)Toogle Notebook Area (Left Side)"
msgstr "(left to Key_1)Toogle Notebook Area (Left Side)"

#: flatcamGUI/FlatCAMGUI.py:1434
msgid "En(Dis)able Obj Plot"
msgstr "En(Dis)able Obj Plot"

#: flatcamGUI/FlatCAMGUI.py:1435
msgid "Deselects all objects"
msgstr "Deselects all objects"

#: flatcamGUI/FlatCAMGUI.py:1449
msgid "Editor Shortcut list"
msgstr "Editor Shortcut list"

#: flatcamGUI/FlatCAMGUI.py:1603
msgid "GEOMETRY EDITOR"
msgstr "GEOMETRY EDITOR"

#: flatcamGUI/FlatCAMGUI.py:1603
msgid "Draw an Arc"
msgstr "Draw an Arc"

#: flatcamGUI/FlatCAMGUI.py:1603
msgid "Copy Geo Item"
msgstr "Copy Geo Item"

#: flatcamGUI/FlatCAMGUI.py:1604
msgid "Within Add Arc will toogle the ARC direction: CW or CCW"
msgstr "Within Add Arc will toogle the ARC direction: CW or CCW"

#: flatcamGUI/FlatCAMGUI.py:1604
msgid "Polygon Intersection Tool"
msgstr "Polygon Intersection Tool"

#: flatcamGUI/FlatCAMGUI.py:1605
msgid "Geo Paint Tool"
msgstr "Geo Paint Tool"

#: flatcamGUI/FlatCAMGUI.py:1605 flatcamGUI/FlatCAMGUI.py:1694
#: flatcamGUI/FlatCAMGUI.py:1814
msgid "Jump to Location (x, y)"
msgstr "Jump to Location (x, y)"

#: flatcamGUI/FlatCAMGUI.py:1605
msgid "Toggle Corner Snap"
msgstr "Toggle Corner Snap"

#: flatcamGUI/FlatCAMGUI.py:1605
msgid "Move Geo Item"
msgstr "Move Geo Item"

#: flatcamGUI/FlatCAMGUI.py:1606
msgid "Within Add Arc will cycle through the ARC modes"
msgstr "Within Add Arc will cycle through the ARC modes"

#: flatcamGUI/FlatCAMGUI.py:1606
msgid "Draw a Polygon"
msgstr "Draw a Polygon"

#: flatcamGUI/FlatCAMGUI.py:1606
msgid "Draw a Circle"
msgstr "Draw a Circle"

#: flatcamGUI/FlatCAMGUI.py:1607
msgid "Draw a Path"
msgstr "Draw a Path"

#: flatcamGUI/FlatCAMGUI.py:1607
msgid "Draw Rectangle"
msgstr "Draw Rectangle"

#: flatcamGUI/FlatCAMGUI.py:1607
msgid "Polygon Subtraction Tool"
msgstr "Polygon Subtraction Tool"

#: flatcamGUI/FlatCAMGUI.py:1607
msgid "Add Text Tool"
msgstr "Add Text Tool"

#: flatcamGUI/FlatCAMGUI.py:1608
msgid "Polygon Union Tool"
msgstr "Polygon Union Tool"

#: flatcamGUI/FlatCAMGUI.py:1608
msgid "Flip shape on X axis"
msgstr "Flip shape on X axis"

#: flatcamGUI/FlatCAMGUI.py:1608
msgid "Flip shape on Y axis"
msgstr "Flip shape on Y axis"

#: flatcamGUI/FlatCAMGUI.py:1609
msgid "Skew shape on X axis"
msgstr "Skew shape on X axis"

#: flatcamGUI/FlatCAMGUI.py:1609
msgid "Skew shape on Y axis"
msgstr "Skew shape on Y axis"

#: flatcamGUI/FlatCAMGUI.py:1609
msgid "Editor Transformation Tool"
msgstr "Editor Transformation Tool"

#: flatcamGUI/FlatCAMGUI.py:1610
msgid "Offset shape on X axis"
msgstr "Offset shape on X axis"

#: flatcamGUI/FlatCAMGUI.py:1610
msgid "Offset shape on Y axis"
msgstr "Offset shape on Y axis"

#: flatcamGUI/FlatCAMGUI.py:1611 flatcamGUI/FlatCAMGUI.py:1697
#: flatcamGUI/FlatCAMGUI.py:1819
msgid "Save Object and Exit Editor"
msgstr "Save Object and Exit Editor"

#: flatcamGUI/FlatCAMGUI.py:1611
msgid "Polygon Cut Tool"
msgstr "Polygon Cut Tool"

#: flatcamGUI/FlatCAMGUI.py:1612
msgid "Rotate Geometry"
msgstr "Rotate Geometry"

#: flatcamGUI/FlatCAMGUI.py:1612
msgid "Finish drawing for certain tools"
msgstr "Finish drawing for certain tools"

#: flatcamGUI/FlatCAMGUI.py:1612 flatcamGUI/FlatCAMGUI.py:1697
#: flatcamGUI/FlatCAMGUI.py:1817
msgid "Abort and return to Select"
msgstr "Abort and return to Select"

#: flatcamGUI/FlatCAMGUI.py:1613 flatcamGUI/FlatCAMGUI.py:2211
msgid "Delete Shape"
msgstr "Delete Shape"

#: flatcamGUI/FlatCAMGUI.py:1693
msgid "EXCELLON EDITOR"
msgstr "EXCELLON EDITOR"

#: flatcamGUI/FlatCAMGUI.py:1693
msgid "Copy Drill(s)"
msgstr "Copy Drill(s)"

#: flatcamGUI/FlatCAMGUI.py:1693 flatcamGUI/FlatCAMGUI.py:1902
msgid "Add Drill"
msgstr "Add Drill"

#: flatcamGUI/FlatCAMGUI.py:1694
msgid "Move Drill(s)"
msgstr "Move Drill(s)"

#: flatcamGUI/FlatCAMGUI.py:1695
msgid "Add a new Tool"
msgstr "Add a new Tool"

#: flatcamGUI/FlatCAMGUI.py:1696
msgid "Delete Drill(s)"
msgstr "Delete Drill(s)"

#: flatcamGUI/FlatCAMGUI.py:1696
msgid "Alternate: Delete Tool(s)"
msgstr "Alternate: Delete Tool(s)"

#: flatcamGUI/FlatCAMGUI.py:1813
msgid "GERBER EDITOR"
msgstr "GERBER EDITOR"

#: flatcamGUI/FlatCAMGUI.py:1813
msgid "Add Disc"
msgstr "Add Disc"

#: flatcamGUI/FlatCAMGUI.py:1813
msgid "Add SemiDisc"
msgstr "Add SemiDisc"

#: flatcamGUI/FlatCAMGUI.py:1815
msgid "Within Track & Region Tools will cycle in REVERSE the bend modes"
msgstr "Within Track & Region Tools will cycle in REVERSE the bend modes"

#: flatcamGUI/FlatCAMGUI.py:1816
msgid "Within Track & Region Tools will cycle FORWARD the bend modes"
msgstr "Within Track & Region Tools will cycle FORWARD the bend modes"

#: flatcamGUI/FlatCAMGUI.py:1817
msgid "Alternate: Delete Apertures"
msgstr "Alternate: Delete Apertures"

#: flatcamGUI/FlatCAMGUI.py:1818
msgid "Eraser Tool"
msgstr "Eraser Tool"

#: flatcamGUI/FlatCAMGUI.py:1819 flatcamGUI/PreferencesUI.py:1854
msgid "Mark Area Tool"
msgstr "Mark Area Tool"

#: flatcamGUI/FlatCAMGUI.py:1819
msgid "Poligonize Tool"
msgstr "Poligonize Tool"

#: flatcamGUI/FlatCAMGUI.py:1819
msgid "Transformation Tool"
msgstr "Transformation Tool"

#: flatcamGUI/FlatCAMGUI.py:1835
msgid "Toggle Visibility"
msgstr "Toggle Visibility"

#: flatcamGUI/FlatCAMGUI.py:1839
msgid "New"
msgstr "New"

#: flatcamGUI/FlatCAMGUI.py:1840
msgid "Geometry"
msgstr "Geometry"

#: flatcamGUI/FlatCAMGUI.py:1842 flatcamTools/ToolFilm.py:326
msgid "Excellon"
msgstr "Excellon"

#: flatcamGUI/FlatCAMGUI.py:1847
msgid "Grids"
msgstr "Grids"

#: flatcamGUI/FlatCAMGUI.py:1849
msgid "View"
msgstr "View"

#: flatcamGUI/FlatCAMGUI.py:1851
msgid "Clear Plot"
msgstr "Clear Plot"

#: flatcamGUI/FlatCAMGUI.py:1852
msgid "Replot"
msgstr "Replot"

#: flatcamGUI/FlatCAMGUI.py:1855
msgid "Geo Editor"
msgstr "Geo Editor"

#: flatcamGUI/FlatCAMGUI.py:1856
msgid "Path"
msgstr "Path"

#: flatcamGUI/FlatCAMGUI.py:1857
msgid "Rectangle"
msgstr "Rectangle"

#: flatcamGUI/FlatCAMGUI.py:1859
msgid "Circle"
msgstr "Circle"

#: flatcamGUI/FlatCAMGUI.py:1860
msgid "Polygon"
msgstr "Polygon"

#: flatcamGUI/FlatCAMGUI.py:1861
msgid "Arc"
msgstr "Arc"

#: flatcamGUI/FlatCAMGUI.py:1870
msgid "Union"
msgstr "Union"

#: flatcamGUI/FlatCAMGUI.py:1871
msgid "Intersection"
msgstr "Intersection"

#: flatcamGUI/FlatCAMGUI.py:1872
msgid "Substraction"
msgstr "Substraction"

#: flatcamGUI/FlatCAMGUI.py:1873 flatcamGUI/ObjectUI.py:1606
#: flatcamGUI/PreferencesUI.py:3395
msgid "Cut"
msgstr "Cut"

#: flatcamGUI/FlatCAMGUI.py:1880
msgid "Pad"
msgstr "Pad"

#: flatcamGUI/FlatCAMGUI.py:1881
msgid "Pad Array"
msgstr "Pad Array"

#: flatcamGUI/FlatCAMGUI.py:1884
msgid "Track"
msgstr "Track"

#: flatcamGUI/FlatCAMGUI.py:1885
msgid "Region"
msgstr "Region"

#: flatcamGUI/FlatCAMGUI.py:1901
msgid "Exc Editor"
msgstr "Exc Editor"

#: flatcamGUI/FlatCAMGUI.py:1931
msgid ""
"Relative neasurement.\n"
"Reference is last click position"
msgstr ""
"Relative neasurement.\n"
"Reference is last click position"

#: flatcamGUI/FlatCAMGUI.py:1937
msgid ""
"Absolute neasurement.\n"
"Reference is (X=0, Y= 0) position"
msgstr ""
"Absolute neasurement.\n"
"Reference is (X=0, Y= 0) position"

#: flatcamGUI/FlatCAMGUI.py:2054
msgid "Lock Toolbars"
msgstr "Lock Toolbars"

#: flatcamGUI/FlatCAMGUI.py:2146
msgid "&Cutout Tool"
msgstr "&Cutout Tool"

#: flatcamGUI/FlatCAMGUI.py:2182
msgid "Select 'Esc'"
msgstr "Select 'Esc'"

#: flatcamGUI/FlatCAMGUI.py:2209
msgid "Copy Objects"
msgstr "Copy Objects"

#: flatcamGUI/FlatCAMGUI.py:2216
msgid "Move Objects"
msgstr "Move Objects"

#: flatcamGUI/FlatCAMGUI.py:2698
msgid ""
"Please first select a geometry item to be cutted\n"
"then select the geometry item that will be cutted\n"
"out of the first item. In the end press ~X~ key or\n"
"the toolbar button."
msgstr ""
"Please first select a geometry item to be cutted\n"
"then select the geometry item that will be cutted\n"
"out of the first item. In the end press ~X~ key or\n"
"the toolbar button."

#: flatcamGUI/FlatCAMGUI.py:2705 flatcamGUI/FlatCAMGUI.py:2848
#: flatcamGUI/FlatCAMGUI.py:2907 flatcamGUI/FlatCAMGUI.py:2927
msgid "Warning"
msgstr "Warning"

#: flatcamGUI/FlatCAMGUI.py:2843
msgid ""
"Please select geometry items \n"
"on which to perform Intersection Tool."
msgstr ""
"Please select geometry items \n"
"on which to perform Intersection Tool."

#: flatcamGUI/FlatCAMGUI.py:2902
msgid ""
"Please select geometry items \n"
"on which to perform Substraction Tool."
msgstr ""
"Please select geometry items \n"
"on which to perform Substraction Tool."

#: flatcamGUI/FlatCAMGUI.py:2922
msgid ""
"Please select geometry items \n"
"on which to perform union."
msgstr ""
"Please select geometry items \n"
"on which to perform union."

#: flatcamGUI/FlatCAMGUI.py:3006 flatcamGUI/FlatCAMGUI.py:3224
msgid "Cancelled. Nothing selected to delete."
msgstr "Cancelled. Nothing selected to delete."

#: flatcamGUI/FlatCAMGUI.py:3091 flatcamGUI/FlatCAMGUI.py:3292
msgid "Cancelled. Nothing selected to copy."
msgstr "Cancelled. Nothing selected to copy."

#: flatcamGUI/FlatCAMGUI.py:3138 flatcamGUI/FlatCAMGUI.py:3339
msgid "Cancelled. Nothing selected to move."
msgstr "Cancelled. Nothing selected to move."

#: flatcamGUI/FlatCAMGUI.py:3365
msgid "New Tool ..."
msgstr "New Tool ..."

#: flatcamGUI/FlatCAMGUI.py:3366 flatcamTools/ToolNonCopperClear.py:542
#: flatcamTools/ToolPaint.py:452 flatcamTools/ToolSolderPaste.py:464
msgid "Enter a Tool Diameter"
msgstr "Enter a Tool Diameter"

#: flatcamGUI/FlatCAMGUI.py:3382
msgid "Adding Tool cancelled ..."
msgstr "Adding Tool cancelled ..."

#: flatcamGUI/FlatCAMGUI.py:3425
msgid "Distance Tool exit..."
msgstr "Distance Tool exit..."

#: flatcamGUI/FlatCAMGUI.py:3531
msgid "Application is saving the project. Please wait ..."
msgstr "Application is saving the project. Please wait ..."

#: flatcamGUI/FlatCAMGUI.py:3569 flatcamGUI/FlatCAMGUI.py:3576
msgid "Idle."
msgstr "Idle."

#: flatcamGUI/FlatCAMGUI.py:3605
msgid "Application started ..."
msgstr "Application started ..."

#: flatcamGUI/FlatCAMGUI.py:3606
msgid "Hello!"
msgstr "Hello!"

#: flatcamGUI/FlatCAMGUI.py:3662
msgid "Open Project ..."
msgstr "Open Project ..."

#: flatcamGUI/FlatCAMGUI.py:3687
msgid "Exit"
msgstr "Exit"

#: flatcamGUI/FlatCAMGUI.py:3736 flatcamGUI/FlatCAMGUI.py:3763
msgid "Title"
msgstr "Title"

#: flatcamGUI/FlatCAMGUI.py:3737 flatcamGUI/FlatCAMGUI.py:3767
msgid "Web Link"
msgstr "Web Link"

#: flatcamGUI/FlatCAMGUI.py:3741
msgid ""
"Index.\n"
"The rows in gray color will populate the Bookmarks menu.\n"
"The number of gray colored rows is set in Preferences."
msgstr ""
"Index.\n"
"The rows in gray color will populate the Bookmarks menu.\n"
"The number of gray colored rows is set in Preferences."

#: flatcamGUI/FlatCAMGUI.py:3745
msgid ""
"Description of the link that is set as an menu action.\n"
"Try to keep it short because it is installed as a menu item."
msgstr ""
"Description of the link that is set as an menu action.\n"
"Try to keep it short because it is installed as a menu item."

#: flatcamGUI/FlatCAMGUI.py:3748
msgid "Web Link. E.g: https://your_website.org "
msgstr "Web Link. E.g: https://your_website.org "

#: flatcamGUI/FlatCAMGUI.py:3757
msgid "<b>New Bookmark</b>"
msgstr "<b>New Bookmark</b>"

#: flatcamGUI/FlatCAMGUI.py:3776
msgid "Add Entry"
msgstr "Add Entry"

#: flatcamGUI/FlatCAMGUI.py:3777
msgid "Remove Entry"
msgstr "Remove Entry"

#: flatcamGUI/FlatCAMGUI.py:3778
msgid "Export List"
msgstr "Export List"

#: flatcamGUI/FlatCAMGUI.py:3779
msgid "Import List"
msgstr "Import List"

#: flatcamGUI/FlatCAMGUI.py:3914
msgid "This bookmark can not be removed"
msgstr ""

#: flatcamGUI/FlatCAMGUI.py:3961
#, python-brace-format
msgid "{l_save}/FlatCAM_Bookmarks_{date}"
msgstr "{l_save}/FlatCAM_Bookmarks_{date}"

#: flatcamGUI/FlatCAMGUI.py:3969
msgid "FlatCAM bookmarks export cancelled."
msgstr "FlatCAM bookmarks export cancelled."

#: flatcamGUI/FlatCAMGUI.py:3989
msgid "Could not load bookamrks file."
msgstr "Could not load bookamrks file."

#: flatcamGUI/FlatCAMGUI.py:4000
msgid "Failed to write bookmarks to file."
msgstr "Failed to write bookmarks to file."

#: flatcamGUI/FlatCAMGUI.py:4003
msgid "Exported bookmarks to"
msgstr "Exported bookmarks to"

#: flatcamGUI/FlatCAMGUI.py:4009
msgid "Import FlatCAM Bookmarks"
msgstr "Import FlatCAM Bookmarks"

#: flatcamGUI/FlatCAMGUI.py:4016
msgid "FlatCAM bookmarks import cancelled."
msgstr "FlatCAM bookmarks import cancelled."

#: flatcamGUI/FlatCAMGUI.py:4024
msgid "Could not load bookmarks file."
msgstr "Could not load bookmarks file."

#: flatcamGUI/FlatCAMGUI.py:4032
msgid "Imported Bookmarks from"
msgstr "Imported Bookmarks from"

#: flatcamGUI/ObjectUI.py:34
msgid "FlatCAM Object"
msgstr "FlatCAM Object"

#: flatcamGUI/ObjectUI.py:61
msgid ""
"BASIC is suitable for a beginner. Many parameters\n"
"are hidden from the user in this mode.\n"
"ADVANCED mode will make available all parameters.\n"
"\n"
"To change the application LEVEL, go to:\n"
"Edit -> Preferences -> General and check:\n"
"'APP. LEVEL' radio button."
msgstr ""
"BASIC is suitable for a beginner. Many parameters\n"
"are hidden from the user in this mode.\n"
"ADVANCED mode will make available all parameters.\n"
"\n"
"To change the application LEVEL, go to:\n"
"Edit -> Preferences -> General and check:\n"
"'APP. LEVEL' radio button."

#: flatcamGUI/ObjectUI.py:89
msgid "Change the size of the object."
msgstr "Change the size of the object."

#: flatcamGUI/ObjectUI.py:95
msgid "Factor"
msgstr "Factor"

#: flatcamGUI/ObjectUI.py:97
msgid ""
"Factor by which to multiply\n"
"geometric features of this object."
msgstr ""
"Factor by which to multiply\n"
"geometric features of this object."

#: flatcamGUI/ObjectUI.py:110
msgid "Perform scaling operation."
msgstr "Perform scaling operation."

#: flatcamGUI/ObjectUI.py:121
msgid "Change the position of this object."
msgstr "Change the position of this object."

#: flatcamGUI/ObjectUI.py:126
msgid "Vector"
msgstr "Vector"

#: flatcamGUI/ObjectUI.py:128
msgid ""
"Amount by which to move the object\n"
"in the x and y axes in (x, y) format."
msgstr ""
"Amount by which to move the object\n"
"in the x and y axes in (x, y) format."

#: flatcamGUI/ObjectUI.py:136
msgid "Perform the offset operation."
msgstr "Perform the offset operation."

#: flatcamGUI/ObjectUI.py:153
msgid "Gerber Object"
msgstr "Gerber Object"

#: flatcamGUI/ObjectUI.py:163 flatcamGUI/ObjectUI.py:657
#: flatcamGUI/ObjectUI.py:1041 flatcamGUI/ObjectUI.py:1590
#: flatcamGUI/PreferencesUI.py:1193 flatcamGUI/PreferencesUI.py:1893
#: flatcamGUI/PreferencesUI.py:2904 flatcamGUI/PreferencesUI.py:3369
msgid "Plot Options"
msgstr "Plot Options"

#: flatcamGUI/ObjectUI.py:169 flatcamGUI/ObjectUI.py:658
#: flatcamGUI/PreferencesUI.py:1200 flatcamGUI/PreferencesUI.py:1905
msgid "Solid"
msgstr "Solid"

#: flatcamGUI/ObjectUI.py:171 flatcamGUI/PreferencesUI.py:1202
msgid "Solid color polygons."
msgstr "Solid color polygons."

#: flatcamGUI/ObjectUI.py:177 flatcamGUI/PreferencesUI.py:1207
msgid "M-Color"
msgstr "M-Color"

#: flatcamGUI/ObjectUI.py:179 flatcamGUI/PreferencesUI.py:1209
msgid "Draw polygons in different colors."
msgstr "Draw polygons in different colors."

#: flatcamGUI/ObjectUI.py:185 flatcamGUI/ObjectUI.py:696
#: flatcamGUI/PreferencesUI.py:1214 flatcamGUI/PreferencesUI.py:1899
#: flatcamGUI/PreferencesUI.py:2908
msgid "Plot"
msgstr "Plot"

#: flatcamGUI/ObjectUI.py:187 flatcamGUI/ObjectUI.py:698
#: flatcamGUI/ObjectUI.py:1087 flatcamGUI/ObjectUI.py:1700
#: flatcamGUI/PreferencesUI.py:1216 flatcamGUI/PreferencesUI.py:2910
#: flatcamGUI/PreferencesUI.py:3380
msgid "Plot (show) this object."
msgstr "Plot (show) this object."

#: flatcamGUI/ObjectUI.py:195 flatcamGUI/ObjectUI.py:669
#: flatcamGUI/ObjectUI.py:1047 flatcamGUI/ObjectUI.py:1620
#: flatcamGUI/ObjectUI.py:1881 flatcamGUI/ObjectUI.py:1933
msgid "Name"
msgstr "Name"

#: flatcamGUI/ObjectUI.py:216
msgid ""
"Toggle the display of the Gerber Apertures Table.\n"
"When unchecked, it will delete all mark shapes\n"
"that are drawn on canvas."
msgstr ""
"Toggle the display of the Gerber Apertures Table.\n"
"When unchecked, it will delete all mark shapes\n"
"that are drawn on canvas."

#: flatcamGUI/ObjectUI.py:226
msgid "Mark All"
msgstr "Mark All"

#: flatcamGUI/ObjectUI.py:228
msgid ""
"When checked it will display all the apertures.\n"
"When unchecked, it will delete all mark shapes\n"
"that are drawn on canvas."
msgstr ""
"When checked it will display all the apertures.\n"
"When unchecked, it will delete all mark shapes\n"
"that are drawn on canvas."

#: flatcamGUI/ObjectUI.py:256
msgid "Mark the aperture instances on canvas."
msgstr "Mark the aperture instances on canvas."

#: flatcamGUI/ObjectUI.py:265 flatcamGUI/PreferencesUI.py:1293
msgid "Isolation Routing"
msgstr "Isolation Routing"

#: flatcamGUI/ObjectUI.py:267 flatcamGUI/PreferencesUI.py:1295
msgid ""
"Create a Geometry object with\n"
"toolpaths to cut outside polygons."
msgstr ""
"Create a Geometry object with\n"
"toolpaths to cut outside polygons."

#: flatcamGUI/ObjectUI.py:282 flatcamGUI/PreferencesUI.py:1467
#: flatcamGUI/PreferencesUI.py:3714 flatcamTools/ToolNonCopperClear.py:195
msgid "Tool Type"
msgstr "Tool Type"

#: flatcamGUI/ObjectUI.py:284 flatcamGUI/PreferencesUI.py:1469
msgid ""
"Choose what tool to use for Gerber isolation:\n"
"'Circular' or 'V-shape'.\n"
"When the 'V-shape' is selected then the tool\n"
"diameter will depend on the chosen cut depth."
msgstr ""
"Choose what tool to use for Gerber isolation:\n"
"'Circular' or 'V-shape'.\n"
"When the 'V-shape' is selected then the tool\n"
"diameter will depend on the chosen cut depth."

#: flatcamGUI/ObjectUI.py:296 flatcamGUI/ObjectUI.py:1260
#: flatcamGUI/PreferencesUI.py:1481 flatcamGUI/PreferencesUI.py:3733
#: flatcamTools/ToolNonCopperClear.py:222
msgid "V-Tip Dia"
msgstr "V-Tip Dia"

#: flatcamGUI/ObjectUI.py:298 flatcamGUI/ObjectUI.py:1263
#: flatcamGUI/PreferencesUI.py:1483 flatcamGUI/PreferencesUI.py:3735
#: flatcamTools/ToolNonCopperClear.py:224
msgid "The tip diameter for V-Shape Tool"
msgstr "The tip diameter for V-Shape Tool"

#: flatcamGUI/ObjectUI.py:309 flatcamGUI/ObjectUI.py:1275
#: flatcamGUI/PreferencesUI.py:1493 flatcamGUI/PreferencesUI.py:3745
#: flatcamTools/ToolNonCopperClear.py:232
msgid "V-Tip Angle"
msgstr "V-Tip Angle"

#: flatcamGUI/ObjectUI.py:311 flatcamGUI/ObjectUI.py:1278
#: flatcamGUI/PreferencesUI.py:1495 flatcamGUI/PreferencesUI.py:3747
#: flatcamTools/ToolNonCopperClear.py:234
msgid ""
"The tip angle for V-Shape Tool.\n"
"In degree."
msgstr ""
"The tip angle for V-Shape Tool.\n"
"In degree."

#: flatcamGUI/ObjectUI.py:323 flatcamGUI/ObjectUI.py:751
#: flatcamGUI/ObjectUI.py:1291 flatcamGUI/PreferencesUI.py:1506
#: flatcamGUI/PreferencesUI.py:2148 flatcamGUI/PreferencesUI.py:2970
#: flatcamGUI/PreferencesUI.py:3799 flatcamGUI/PreferencesUI.py:4673
#: flatcamTools/ToolCalculators.py:109 flatcamTools/ToolNonCopperClear.py:277
msgid "Cut Z"
msgstr "Cut Z"

#: flatcamGUI/ObjectUI.py:325 flatcamGUI/ObjectUI.py:1294
#: flatcamGUI/PreferencesUI.py:1508 flatcamGUI/PreferencesUI.py:2972
msgid ""
"Cutting depth (negative)\n"
"below the copper surface."
msgstr ""
"Cutting depth (negative)\n"
"below the copper surface."

#: flatcamGUI/ObjectUI.py:339
msgid ""
"Diameter of the cutting tool.\n"
"If you want to have an isolation path\n"
"inside the actual shape of the Gerber\n"
"feature, use a negative value for\n"
"this parameter."
msgstr ""
"Diameter of the cutting tool.\n"
"If you want to have an isolation path\n"
"inside the actual shape of the Gerber\n"
"feature, use a negative value for\n"
"this parameter."

#: flatcamGUI/ObjectUI.py:355 flatcamGUI/PreferencesUI.py:1317
msgid "# Passes"
msgstr "# Passes"

#: flatcamGUI/ObjectUI.py:357 flatcamGUI/PreferencesUI.py:1319
msgid ""
"Width of the isolation gap in\n"
"number (integer) of tool widths."
msgstr ""
"Width of the isolation gap in\n"
"number (integer) of tool widths."

#: flatcamGUI/ObjectUI.py:367 flatcamGUI/PreferencesUI.py:1328
msgid "Pass overlap"
msgstr "Pass overlap"

#: flatcamGUI/ObjectUI.py:369 flatcamGUI/PreferencesUI.py:1330
#, python-format
msgid ""
"How much (fraction) of the tool width to overlap each tool pass.\n"
"Example:\n"
"A value here of 0.25 means an overlap of 25%% from the tool diameter found "
"above."
msgstr ""
"How much (fraction) of the tool width to overlap each tool pass.\n"
"Example:\n"
"A value here of 0.25 means an overlap of 25%% from the tool diameter found "
"above."

#: flatcamGUI/ObjectUI.py:383 flatcamGUI/PreferencesUI.py:1343
#: flatcamGUI/PreferencesUI.py:3347 flatcamGUI/PreferencesUI.py:3759
#: flatcamTools/ToolNonCopperClear.py:147
msgid "Milling Type"
msgstr "Milling Type"

#: flatcamGUI/ObjectUI.py:385 flatcamGUI/PreferencesUI.py:1345
#: flatcamGUI/PreferencesUI.py:3349
msgid ""
"Milling type:\n"
"- climb / best for precision milling and to reduce tool usage\n"
"- conventional / useful when there is no backlash compensation"
msgstr ""
"Milling type:\n"
"- climb / best for precision milling and to reduce tool usage\n"
"- conventional / useful when there is no backlash compensation"

#: flatcamGUI/ObjectUI.py:389 flatcamGUI/PreferencesUI.py:1350
#: flatcamGUI/PreferencesUI.py:3353 flatcamGUI/PreferencesUI.py:3766
#: flatcamTools/ToolNonCopperClear.py:154
msgid "Climb"
msgstr "Climb"

#: flatcamGUI/ObjectUI.py:390 flatcamGUI/PreferencesUI.py:1351
#: flatcamGUI/PreferencesUI.py:3354 flatcamGUI/PreferencesUI.py:3767
#: flatcamTools/ToolNonCopperClear.py:155
msgid "Conv."
msgstr "Conv."

#: flatcamGUI/ObjectUI.py:395 flatcamGUI/PreferencesUI.py:1355
msgid "Combine Passes"
msgstr "Combine Passes"

#: flatcamGUI/ObjectUI.py:397 flatcamGUI/PreferencesUI.py:1357
msgid "Combine all passes into one object"
msgstr "Combine all passes into one object"

#: flatcamGUI/ObjectUI.py:401 flatcamGUI/PreferencesUI.py:1448
msgid "\"Follow\""
msgstr "\"Follow\""

#: flatcamGUI/ObjectUI.py:402 flatcamGUI/PreferencesUI.py:1450
msgid ""
"Generate a 'Follow' geometry.\n"
"This means that it will cut through\n"
"the middle of the trace."
msgstr ""
"Generate a 'Follow' geometry.\n"
"This means that it will cut through\n"
"the middle of the trace."

#: flatcamGUI/ObjectUI.py:407
msgid "Except"
msgstr "Except"

#: flatcamGUI/ObjectUI.py:408
msgid ""
"When the isolation geometry is generated,\n"
"by checking this, the area of the object bellow\n"
"will be subtracted from the isolation geometry."
msgstr ""
"When the isolation geometry is generated,\n"
"by checking this, the area of the object bellow\n"
"will be subtracted from the isolation geometry."

#: flatcamGUI/ObjectUI.py:433 flatcamTools/ToolCutOut.py:61
#: flatcamTools/ToolNonCopperClear.py:69 flatcamTools/ToolPaint.py:68
msgid "Obj Type"
msgstr "Obj Type"

#: flatcamGUI/ObjectUI.py:435
msgid ""
"Specify the type of object to be excepted from isolation.\n"
"It can be of type: Gerber or Geometry.\n"
"What is selected here will dictate the kind\n"
"of objects that will populate the 'Object' combobox."
msgstr ""
"Specify the type of object to be excepted from isolation.\n"
"It can be of type: Gerber or Geometry.\n"
"What is selected here will dictate the kind\n"
"of objects that will populate the 'Object' combobox."

#: flatcamGUI/ObjectUI.py:448 flatcamTools/ToolCutOut.py:77
#: flatcamTools/ToolNonCopperClear.py:87 flatcamTools/ToolPaint.py:86
#: flatcamTools/ToolPanelize.py:70 flatcamTools/ToolPanelize.py:83
msgid "Object"
msgstr "Object"

#: flatcamGUI/ObjectUI.py:449
msgid "Object whose area will be removed from isolation geometry."
msgstr "Object whose area will be removed from isolation geometry."

#: flatcamGUI/ObjectUI.py:453
msgid "Generate Isolation Geometry"
msgstr "Generate Isolation Geometry"

#: flatcamGUI/ObjectUI.py:455
msgid ""
"Create a Geometry object with toolpaths to cut \n"
"isolation outside, inside or on both sides of the\n"
"object. For a Gerber object outside means outside\n"
"of the Gerber feature and inside means inside of\n"
"the Gerber feature, if possible at all. This means\n"
"that only if the Gerber feature has openings inside, they\n"
"will be isolated. If what is wanted is to cut isolation\n"
"inside the actual Gerber feature, use a negative tool\n"
"diameter above."
msgstr ""
"Create a Geometry object with toolpaths to cut \n"
"isolation outside, inside or on both sides of the\n"
"object. For a Gerber object outside means outside\n"
"of the Gerber feature and inside means inside of\n"
"the Gerber feature, if possible at all. This means\n"
"that only if the Gerber feature has openings inside, they\n"
"will be isolated. If what is wanted is to cut isolation\n"
"inside the actual Gerber feature, use a negative tool\n"
"diameter above."

#: flatcamGUI/ObjectUI.py:467
msgid "Buffer Solid Geometry"
msgstr "Buffer Solid Geometry"

#: flatcamGUI/ObjectUI.py:469
msgid ""
"This button is shown only when the Gerber file\n"
"is loaded without buffering.\n"
"Clicking this will create the buffered geometry\n"
"required for isolation."
msgstr ""
"This button is shown only when the Gerber file\n"
"is loaded without buffering.\n"
"Clicking this will create the buffered geometry\n"
"required for isolation."

#: flatcamGUI/ObjectUI.py:476
msgid "FULL Geo"
msgstr "FULL Geo"

#: flatcamGUI/ObjectUI.py:478
msgid ""
"Create the Geometry Object\n"
"for isolation routing. It contains both\n"
"the interiors and exteriors geometry."
msgstr ""
"Create the Geometry Object\n"
"for isolation routing. It contains both\n"
"the interiors and exteriors geometry."

#: flatcamGUI/ObjectUI.py:487
msgid "Ext Geo"
msgstr "Ext Geo"

#: flatcamGUI/ObjectUI.py:489
msgid ""
"Create the Geometry Object\n"
"for isolation routing containing\n"
"only the exteriors geometry."
msgstr ""
"Create the Geometry Object\n"
"for isolation routing containing\n"
"only the exteriors geometry."

#: flatcamGUI/ObjectUI.py:496
msgid "Int Geo"
msgstr "Int Geo"

#: flatcamGUI/ObjectUI.py:498
msgid ""
"Create the Geometry Object\n"
"for isolation routing containing\n"
"only the interiors geometry."
msgstr ""
"Create the Geometry Object\n"
"for isolation routing containing\n"
"only the interiors geometry."

#: flatcamGUI/ObjectUI.py:530
msgid "Clear N-copper"
msgstr "Clear N-copper"

#: flatcamGUI/ObjectUI.py:532 flatcamGUI/PreferencesUI.py:3697
msgid ""
"Create a Geometry object with\n"
"toolpaths to cut all non-copper regions."
msgstr ""
"Create a Geometry object with\n"
"toolpaths to cut all non-copper regions."

#: flatcamGUI/ObjectUI.py:539 flatcamTools/ToolNonCopperClear.py:459
msgid ""
"Create the Geometry Object\n"
"for non-copper routing."
msgstr ""
"Create the Geometry Object\n"
"for non-copper routing."

#: flatcamGUI/ObjectUI.py:546
msgid "Board cutout"
msgstr "Board cutout"

#: flatcamGUI/ObjectUI.py:548 flatcamGUI/PreferencesUI.py:3972
msgid ""
"Create toolpaths to cut around\n"
"the PCB and separate it from\n"
"the original board."
msgstr ""
"Create toolpaths to cut around\n"
"the PCB and separate it from\n"
"the original board."

#: flatcamGUI/ObjectUI.py:555
msgid ""
"Generate the geometry for\n"
"the board cutout."
msgstr ""
"Generate the geometry for\n"
"the board cutout."

#: flatcamGUI/ObjectUI.py:562 flatcamGUI/PreferencesUI.py:1362
msgid "Non-copper regions"
msgstr "Non-copper regions"

#: flatcamGUI/ObjectUI.py:564 flatcamGUI/PreferencesUI.py:1364
msgid ""
"Create polygons covering the\n"
"areas without copper on the PCB.\n"
"Equivalent to the inverse of this\n"
"object. Can be used to remove all\n"
"copper from a specified region."
msgstr ""
"Create polygons covering the\n"
"areas without copper on the PCB.\n"
"Equivalent to the inverse of this\n"
"object. Can be used to remove all\n"
"copper from a specified region."

#: flatcamGUI/ObjectUI.py:574 flatcamGUI/ObjectUI.py:610
#: flatcamGUI/PreferencesUI.py:1376 flatcamGUI/PreferencesUI.py:1404
msgid "Boundary Margin"
msgstr "Boundary Margin"

#: flatcamGUI/ObjectUI.py:576 flatcamGUI/PreferencesUI.py:1378
msgid ""
"Specify the edge of the PCB\n"
"by drawing a box around all\n"
"objects with this minimum\n"
"distance."
msgstr ""
"Specify the edge of the PCB\n"
"by drawing a box around all\n"
"objects with this minimum\n"
"distance."

#: flatcamGUI/ObjectUI.py:591 flatcamGUI/ObjectUI.py:624
#: flatcamGUI/PreferencesUI.py:1391 flatcamGUI/PreferencesUI.py:1417
msgid "Rounded Geo"
msgstr "Rounded Geo"

#: flatcamGUI/ObjectUI.py:593 flatcamGUI/PreferencesUI.py:1393
msgid "Resulting geometry will have rounded corners."
msgstr "Resulting geometry will have rounded corners."

#: flatcamGUI/ObjectUI.py:597 flatcamGUI/ObjectUI.py:633
#: flatcamTools/ToolCutOut.py:197 flatcamTools/ToolCutOut.py:217
#: flatcamTools/ToolCutOut.py:268 flatcamTools/ToolSolderPaste.py:126
msgid "Generate Geo"
msgstr "Generate Geo"

#: flatcamGUI/ObjectUI.py:602 flatcamGUI/PreferencesUI.py:1398
#: flatcamTools/ToolPanelize.py:84
msgid "Bounding Box"
msgstr "Bounding Box"

#: flatcamGUI/ObjectUI.py:604
msgid ""
"Create a geometry surrounding the Gerber object.\n"
"Square shape."
msgstr ""
"Create a geometry surrounding the Gerber object.\n"
"Square shape."

#: flatcamGUI/ObjectUI.py:612 flatcamGUI/PreferencesUI.py:1406
msgid ""
"Distance of the edges of the box\n"
"to the nearest polygon."
msgstr ""
"Distance of the edges of the box\n"
"to the nearest polygon."

#: flatcamGUI/ObjectUI.py:626 flatcamGUI/PreferencesUI.py:1419
msgid ""
"If the bounding box is \n"
"to have rounded corners\n"
"their radius is equal to\n"
"the margin."
msgstr ""
"If the bounding box is \n"
"to have rounded corners\n"
"their radius is equal to\n"
"the margin."

#: flatcamGUI/ObjectUI.py:635
msgid "Generate the Geometry object."
msgstr "Generate the Geometry object."

#: flatcamGUI/ObjectUI.py:647
msgid "Excellon Object"
msgstr "Excellon Object"

#: flatcamGUI/ObjectUI.py:660
msgid "Solid circles."
msgstr "Solid circles."

#: flatcamGUI/ObjectUI.py:708
msgid "Drills"
msgstr "Drills"

#: flatcamGUI/ObjectUI.py:708 flatcamGUI/PreferencesUI.py:2744
msgid "Slots"
msgstr "Slots"

#: flatcamGUI/ObjectUI.py:709 flatcamGUI/PreferencesUI.py:2349
msgid "Offset Z"
msgstr "Offset Z"

#: flatcamGUI/ObjectUI.py:713
msgid ""
"This is the Tool Number.\n"
"When ToolChange is checked, on toolchange event this value\n"
"will be showed as a T1, T2 ... Tn in the Machine Code.\n"
"\n"
"Here the tools are selected for G-code generation."
msgstr ""
"This is the Tool Number.\n"
"When ToolChange is checked, on toolchange event this value\n"
"will be showed as a T1, T2 ... Tn in the Machine Code.\n"
"\n"
"Here the tools are selected for G-code generation."

#: flatcamGUI/ObjectUI.py:718 flatcamGUI/ObjectUI.py:1112
#: flatcamTools/ToolPaint.py:120
msgid ""
"Tool Diameter. It's value (in current FlatCAM units) \n"
"is the cut width into the material."
msgstr ""
"Tool Diameter. It's value (in current FlatCAM units) \n"
"is the cut width into the material."

#: flatcamGUI/ObjectUI.py:721
msgid ""
"The number of Drill holes. Holes that are drilled with\n"
"a drill bit."
msgstr ""
"The number of Drill holes. Holes that are drilled with\n"
"a drill bit."

#: flatcamGUI/ObjectUI.py:724
msgid ""
"The number of Slot holes. Holes that are created by\n"
"milling them with an endmill bit."
msgstr ""
"The number of Slot holes. Holes that are created by\n"
"milling them with an endmill bit."

#: flatcamGUI/ObjectUI.py:727 flatcamGUI/PreferencesUI.py:2351
msgid ""
"Some drill bits (the larger ones) need to drill deeper\n"
"to create the desired exit hole diameter due of the tip shape.\n"
"The value here can compensate the Cut Z parameter."
msgstr ""
"Some drill bits (the larger ones) need to drill deeper\n"
"to create the desired exit hole diameter due of the tip shape.\n"
"The value here can compensate the Cut Z parameter."

#: flatcamGUI/ObjectUI.py:731
msgid ""
"Toggle display of the drills for the current tool.\n"
"This does not select the tools for G-code generation."
msgstr ""
"Toggle display of the drills for the current tool.\n"
"This does not select the tools for G-code generation."

#: flatcamGUI/ObjectUI.py:738 flatcamGUI/PreferencesUI.py:2137
#: flatcamGUI/PreferencesUI.py:2958
msgid "Create CNC Job"
msgstr "Create CNC Job"

#: flatcamGUI/ObjectUI.py:740
msgid ""
"Create a CNC Job object\n"
"for this drill object."
msgstr ""
"Create a CNC Job object\n"
"for this drill object."

#: flatcamGUI/ObjectUI.py:753 flatcamGUI/PreferencesUI.py:2150
msgid ""
"Drill depth (negative)\n"
"below the copper surface."
msgstr ""
"Drill depth (negative)\n"
"below the copper surface."

#: flatcamGUI/ObjectUI.py:765 flatcamGUI/ObjectUI.py:1333
#: flatcamGUI/PreferencesUI.py:2161 flatcamGUI/PreferencesUI.py:3018
msgid "Travel Z"
msgstr "Travel Z"

#: flatcamGUI/ObjectUI.py:767 flatcamGUI/PreferencesUI.py:2163
msgid ""
"Tool height when travelling\n"
"across the XY plane."
msgstr ""
"Tool height when travelling\n"
"across the XY plane."

#: flatcamGUI/ObjectUI.py:779 flatcamGUI/ObjectUI.py:1354
#: flatcamGUI/PreferencesUI.py:2174 flatcamGUI/PreferencesUI.py:3033
msgid "Tool change"
msgstr "Tool change"

#: flatcamGUI/ObjectUI.py:781 flatcamGUI/PreferencesUI.py:2176
msgid ""
"Include tool-change sequence\n"
"in G-Code (Pause for tool change)."
msgstr ""
"Include tool-change sequence\n"
"in G-Code (Pause for tool change)."

#: flatcamGUI/ObjectUI.py:787 flatcamGUI/ObjectUI.py:1347
msgid "Tool change Z"
msgstr "Tool change Z"

#: flatcamGUI/ObjectUI.py:789 flatcamGUI/ObjectUI.py:1350
#: flatcamGUI/PreferencesUI.py:2185 flatcamGUI/PreferencesUI.py:3048
msgid ""
"Z-axis position (height) for\n"
"tool change."
msgstr ""
"Z-axis position (height) for\n"
"tool change."

#: flatcamGUI/ObjectUI.py:802 flatcamGUI/PreferencesUI.py:2369
#: flatcamGUI/PreferencesUI.py:3187
msgid "Start move Z"
msgstr "Start move Z"

#: flatcamGUI/ObjectUI.py:804 flatcamGUI/PreferencesUI.py:2371
msgid ""
"Height of the tool just after start.\n"
"Delete the value if you don't need this feature."
msgstr ""
"Height of the tool just after start.\n"
"Delete the value if you don't need this feature."

#: flatcamGUI/ObjectUI.py:812 flatcamGUI/ObjectUI.py:1383
#: flatcamGUI/PreferencesUI.py:2196 flatcamGUI/PreferencesUI.py:3062
msgid "End move Z"
msgstr "End move Z"

#: flatcamGUI/ObjectUI.py:814 flatcamGUI/ObjectUI.py:1385
#: flatcamGUI/PreferencesUI.py:2198 flatcamGUI/PreferencesUI.py:3064
msgid ""
"Height of the tool after\n"
"the last move at the end of the job."
msgstr ""
"Height of the tool after\n"
"the last move at the end of the job."

#: flatcamGUI/ObjectUI.py:826 flatcamGUI/PreferencesUI.py:2209
#: flatcamGUI/PreferencesUI.py:5022 flatcamTools/ToolSolderPaste.py:223
msgid "Feedrate Z"
msgstr "Feedrate Z"

#: flatcamGUI/ObjectUI.py:828 flatcamGUI/PreferencesUI.py:2211
msgid ""
"Tool speed while drilling\n"
"(in units per minute).\n"
"So called 'Plunge' feedrate.\n"
"This is for linear move G01."
msgstr ""
"Tool speed while drilling\n"
"(in units per minute).\n"
"So called 'Plunge' feedrate.\n"
"This is for linear move G01."

#: flatcamGUI/ObjectUI.py:842 flatcamGUI/PreferencesUI.py:2379
msgid "Feedrate Rapids"
msgstr "Feedrate Rapids"

#: flatcamGUI/ObjectUI.py:844 flatcamGUI/PreferencesUI.py:2381
msgid ""
"Tool speed while drilling\n"
"(in units per minute).\n"
"This is for the rapid move G00.\n"
"It is useful only for Marlin,\n"
"ignore for any other cases."
msgstr ""
"Tool speed while drilling\n"
"(in units per minute).\n"
"This is for the rapid move G00.\n"
"It is useful only for Marlin,\n"
"ignore for any other cases."

#: flatcamGUI/ObjectUI.py:862 flatcamGUI/ObjectUI.py:1456
#: flatcamGUI/PreferencesUI.py:3108
msgid "Spindle speed"
msgstr "Spindle speed"

#: flatcamGUI/ObjectUI.py:864 flatcamGUI/PreferencesUI.py:2226
msgid ""
"Speed of the spindle\n"
"in RPM (optional)"
msgstr ""
"Speed of the spindle\n"
"in RPM (optional)"

#: flatcamGUI/ObjectUI.py:872 flatcamGUI/ObjectUI.py:1470
#: flatcamGUI/PreferencesUI.py:2234 flatcamGUI/PreferencesUI.py:3121
msgid "Dwell"
msgstr "Dwell"

#: flatcamGUI/ObjectUI.py:874 flatcamGUI/ObjectUI.py:1473
#: flatcamGUI/PreferencesUI.py:2236 flatcamGUI/PreferencesUI.py:3123
msgid ""
"Pause to allow the spindle to reach its\n"
"speed before cutting."
msgstr ""
"Pause to allow the spindle to reach its\n"
"speed before cutting."

#: flatcamGUI/ObjectUI.py:883 flatcamGUI/ObjectUI.py:1483
#: flatcamGUI/PreferencesUI.py:2241 flatcamGUI/PreferencesUI.py:3128
msgid "Number of time units for spindle to dwell."
msgstr "Number of time units for spindle to dwell."

#: flatcamGUI/ObjectUI.py:891 flatcamGUI/PreferencesUI.py:2256
#: flatcamGUI/PreferencesUI.py:3143
msgid "Postprocessor"
msgstr "Postprocessor"

#: flatcamGUI/ObjectUI.py:893 flatcamGUI/PreferencesUI.py:2258
msgid ""
"The postprocessor JSON file that dictates\n"
"Gcode output."
msgstr ""
"The postprocessor JSON file that dictates\n"
"Gcode output."

#: flatcamGUI/ObjectUI.py:902 flatcamGUI/ObjectUI.py:1503
#: flatcamGUI/PreferencesUI.py:2395 flatcamGUI/PreferencesUI.py:3225
msgid "Probe Z depth"
msgstr "Probe Z depth"

#: flatcamGUI/ObjectUI.py:904 flatcamGUI/ObjectUI.py:1505
#: flatcamGUI/PreferencesUI.py:2397 flatcamGUI/PreferencesUI.py:3227
msgid ""
"The maximum depth that the probe is allowed\n"
"to probe. Negative value, in current units."
msgstr ""
"The maximum depth that the probe is allowed\n"
"to probe. Negative value, in current units."

#: flatcamGUI/ObjectUI.py:918 flatcamGUI/ObjectUI.py:1520
#: flatcamGUI/PreferencesUI.py:2408 flatcamGUI/PreferencesUI.py:3240
msgid "Feedrate Probe"
msgstr "Feedrate Probe"

#: flatcamGUI/ObjectUI.py:920 flatcamGUI/ObjectUI.py:1522
#: flatcamGUI/PreferencesUI.py:2410 flatcamGUI/PreferencesUI.py:3242
msgid "The feedrate used while the probe is probing."
msgstr "The feedrate used while the probe is probing."

#: flatcamGUI/ObjectUI.py:940
msgid ""
"Select from the Tools Table above\n"
"the hole dias that are to be drilled.\n"
"Use the # column to make the selection."
msgstr ""
"Select from the Tools Table above\n"
"the hole dias that are to be drilled.\n"
"Use the # column to make the selection."

#: flatcamGUI/ObjectUI.py:947 flatcamGUI/PreferencesUI.py:2267
msgid "Gcode"
msgstr "Gcode"

#: flatcamGUI/ObjectUI.py:949
msgid ""
"Choose what to use for GCode generation:\n"
"'Drills', 'Slots' or 'Both'.\n"
"When choosing 'Slots' or 'Both', slots will be\n"
"converted to a series of drills."
msgstr ""
"Choose what to use for GCode generation:\n"
"'Drills', 'Slots' or 'Both'.\n"
"When choosing 'Slots' or 'Both', slots will be\n"
"converted to a series of drills."

#: flatcamGUI/ObjectUI.py:963
msgid "Create Drills GCode"
msgstr "Create Drills GCode"

#: flatcamGUI/ObjectUI.py:965
msgid "Generate the CNC Job."
msgstr "Generate the CNC Job."

#: flatcamGUI/ObjectUI.py:970 flatcamGUI/PreferencesUI.py:2285
msgid "Mill Holes"
msgstr "Mill Holes"

#: flatcamGUI/ObjectUI.py:972 flatcamGUI/PreferencesUI.py:2287
msgid "Create Geometry for milling holes."
msgstr "Create Geometry for milling holes."

#: flatcamGUI/ObjectUI.py:977
msgid ""
"Select from the Tools Table above\n"
"the hole dias that are to be milled.\n"
"Use the # column to make the selection."
msgstr ""
"Select from the Tools Table above\n"
"the hole dias that are to be milled.\n"
"Use the # column to make the selection."

#: flatcamGUI/ObjectUI.py:983 flatcamGUI/PreferencesUI.py:2291
msgid "Drill Tool dia"
msgstr "Drill Tool dia"

#: flatcamGUI/ObjectUI.py:985 flatcamGUI/PreferencesUI.py:1306
#: flatcamGUI/PreferencesUI.py:2293
msgid "Diameter of the cutting tool."
msgstr "Diameter of the cutting tool."

#: flatcamGUI/ObjectUI.py:992
msgid "Mill Drills Geo"
msgstr "Mill Drills Geo"

#: flatcamGUI/ObjectUI.py:994
msgid ""
"Create the Geometry Object\n"
"for milling DRILLS toolpaths."
msgstr ""
"Create the Geometry Object\n"
"for milling DRILLS toolpaths."

#: flatcamGUI/ObjectUI.py:1002 flatcamGUI/PreferencesUI.py:2302
msgid "Slot Tool dia"
msgstr "Slot Tool dia"

#: flatcamGUI/ObjectUI.py:1004 flatcamGUI/PreferencesUI.py:2304
msgid ""
"Diameter of the cutting tool\n"
"when milling slots."
msgstr ""
"Diameter of the cutting tool\n"
"when milling slots."

#: flatcamGUI/ObjectUI.py:1013
msgid "Mill Slots Geo"
msgstr "Mill Slots Geo"

#: flatcamGUI/ObjectUI.py:1015
msgid ""
"Create the Geometry Object\n"
"for milling SLOTS toolpaths."
msgstr ""
"Create the Geometry Object\n"
"for milling SLOTS toolpaths."

#: flatcamGUI/ObjectUI.py:1036
msgid "Geometry Object"
msgstr "Geometry Object"

#: flatcamGUI/ObjectUI.py:1068
msgid ""
"Tools in this Geometry object used for cutting.\n"
"The 'Offset' entry will set an offset for the cut.\n"
"'Offset' can be inside, outside, on path (none) and custom.\n"
"'Type' entry is only informative and it allow to know the \n"
"intent of using the current tool. \n"
"It can be Rough(ing), Finish(ing) or Iso(lation).\n"
"The 'Tool type'(TT) can be circular with 1 to 4 teeths(C1..C4),\n"
"ball(B), or V-Shaped(V). \n"
"When V-shaped is selected the 'Type' entry is automatically \n"
"set to Isolation, the CutZ parameter in the UI form is\n"
"grayed out and Cut Z is automatically calculated from the newly \n"
"showed UI form entries named V-Tip Dia and V-Tip Angle."
msgstr ""
"Tools in this Geometry object used for cutting.\n"
"The 'Offset' entry will set an offset for the cut.\n"
"'Offset' can be inside, outside, on path (none) and custom.\n"
"'Type' entry is only informative and it allow to know the \n"
"intent of using the current tool. \n"
"It can be Rough(ing), Finish(ing) or Iso(lation).\n"
"The 'Tool type'(TT) can be circular with 1 to 4 teeths(C1..C4),\n"
"ball(B), or V-Shaped(V). \n"
"When V-shaped is selected the 'Type' entry is automatically \n"
"set to Isolation, the CutZ parameter in the UI form is\n"
"grayed out and Cut Z is automatically calculated from the newly \n"
"showed UI form entries named V-Tip Dia and V-Tip Angle."

#: flatcamGUI/ObjectUI.py:1085 flatcamGUI/ObjectUI.py:1698
#: flatcamGUI/PreferencesUI.py:3379
msgid "Plot Object"
msgstr "Plot Object"

#: flatcamGUI/ObjectUI.py:1099 flatcamGUI/ObjectUI.py:1711
msgid "Dia"
msgstr "Dia"

#: flatcamGUI/ObjectUI.py:1099 flatcamGUI/ObjectUI.py:1711
#: flatcamTools/ToolNonCopperClear.py:107 flatcamTools/ToolPaint.py:106
msgid "TT"
msgstr "TT"

#: flatcamGUI/ObjectUI.py:1106
msgid ""
"This is the Tool Number.\n"
"When ToolChange is checked, on toolchange event this value\n"
"will be showed as a T1, T2 ... Tn"
msgstr ""
"This is the Tool Number.\n"
"When ToolChange is checked, on toolchange event this value\n"
"will be showed as a T1, T2 ... Tn"

#: flatcamGUI/ObjectUI.py:1117
msgid ""
"The value for the Offset can be:\n"
"- Path -> There is no offset, the tool cut will be done through the geometry "
"line.\n"
"- In(side) -> The tool cut will follow the geometry inside. It will create a "
"'pocket'.\n"
"- Out(side) -> The tool cut will follow the geometry line on the outside."
msgstr ""
"The value for the Offset can be:\n"
"- Path -> There is no offset, the tool cut will be done through the geometry "
"line.\n"
"- In(side) -> The tool cut will follow the geometry inside. It will create a "
"'pocket'.\n"
"- Out(side) -> The tool cut will follow the geometry line on the outside."

#: flatcamGUI/ObjectUI.py:1124
msgid ""
"The (Operation) Type has only informative value. Usually the UI form "
"values \n"
"are choose based on the operation type and this will serve as a reminder.\n"
"Can be 'Roughing', 'Finishing' or 'Isolation'.\n"
"For Roughing we may choose a lower Feedrate and multiDepth cut.\n"
"For Finishing we may choose a higher Feedrate, without multiDepth.\n"
"For Isolation we need a lower Feedrate as it use a milling bit with a fine "
"tip."
msgstr ""
"The (Operation) Type has only informative value. Usually the UI form "
"values \n"
"are choose based on the operation type and this will serve as a reminder.\n"
"Can be 'Roughing', 'Finishing' or 'Isolation'.\n"
"For Roughing we may choose a lower Feedrate and multiDepth cut.\n"
"For Finishing we may choose a higher Feedrate, without multiDepth.\n"
"For Isolation we need a lower Feedrate as it use a milling bit with a fine "
"tip."

#: flatcamGUI/ObjectUI.py:1133
msgid ""
"The Tool Type (TT) can be:\n"
"- Circular with 1 ... 4 teeth -> it is informative only. Being circular the "
"cut width in material\n"
"is exactly the tool diameter.\n"
"- Ball -> informative only and make reference to the Ball type endmill.\n"
"- V-Shape -> it will disable de Z-Cut parameter in the UI form and enable "
"two additional UI form\n"
"fields: V-Tip Dia and V-Tip Angle. Adjusting those two values will adjust "
"the Z-Cut parameter such\n"
"as the cut width into material will be equal with the value in the Tool "
"Diameter column of this table.\n"
"Choosing the V-Shape Tool Type automatically will select the Operation Type "
"as Isolation."
msgstr ""
"The Tool Type (TT) can be:\n"
"- Circular with 1 ... 4 teeth -> it is informative only. Being circular the "
"cut width in material\n"
"is exactly the tool diameter.\n"
"- Ball -> informative only and make reference to the Ball type endmill.\n"
"- V-Shape -> it will disable de Z-Cut parameter in the UI form and enable "
"two additional UI form\n"
"fields: V-Tip Dia and V-Tip Angle. Adjusting those two values will adjust "
"the Z-Cut parameter such\n"
"as the cut width into material will be equal with the value in the Tool "
"Diameter column of this table.\n"
"Choosing the V-Shape Tool Type automatically will select the Operation Type "
"as Isolation."

#: flatcamGUI/ObjectUI.py:1145
msgid ""
"Plot column. It is visible only for MultiGeo geometries, meaning geometries "
"that holds the geometry\n"
"data into the tools. For those geometries, deleting the tool will delete the "
"geometry data also,\n"
"so be WARNED. From the checkboxes on each row it can be enabled/disabled the "
"plot on canvas\n"
"for the corresponding tool."
msgstr ""
"Plot column. It is visible only for MultiGeo geometries, meaning geometries "
"that holds the geometry\n"
"data into the tools. For those geometries, deleting the tool will delete the "
"geometry data also,\n"
"so be WARNED. From the checkboxes on each row it can be enabled/disabled the "
"plot on canvas\n"
"for the corresponding tool."

#: flatcamGUI/ObjectUI.py:1158
msgid "Tool Offset"
msgstr "Tool Offset"

#: flatcamGUI/ObjectUI.py:1161
msgid ""
"The value to offset the cut when \n"
"the Offset type selected is 'Offset'.\n"
"The value can be positive for 'outside'\n"
"cut and negative for 'inside' cut."
msgstr ""
"The value to offset the cut when \n"
"the Offset type selected is 'Offset'.\n"
"The value can be positive for 'outside'\n"
"cut and negative for 'inside' cut."

#: flatcamGUI/ObjectUI.py:1207 flatcamTools/ToolNonCopperClear.py:247
#: flatcamTools/ToolPaint.py:173
msgid ""
"Add a new tool to the Tool Table\n"
"with the diameter specified above."
msgstr ""
"Add a new tool to the Tool Table\n"
"with the diameter specified above."

#: flatcamGUI/ObjectUI.py:1215
msgid ""
"Copy a selection of tools in the Tool Table\n"
"by first selecting a row in the Tool Table."
msgstr ""
"Copy a selection of tools in the Tool Table\n"
"by first selecting a row in the Tool Table."

#: flatcamGUI/ObjectUI.py:1223
msgid ""
"Delete a selection of tools in the Tool Table\n"
"by first selecting a row in the Tool Table."
msgstr ""
"Delete a selection of tools in the Tool Table\n"
"by first selecting a row in the Tool Table."

#: flatcamGUI/ObjectUI.py:1239
msgid "Tool Data"
msgstr "Tool Data"

#: flatcamGUI/ObjectUI.py:1242
msgid ""
"The data used for creating GCode.\n"
"Each tool store it's own set of such data."
msgstr ""
"The data used for creating GCode.\n"
"Each tool store it's own set of such data."

#: flatcamGUI/ObjectUI.py:1307 flatcamGUI/PreferencesUI.py:2985
msgid "Multi-Depth"
msgstr "Multi-Depth"

#: flatcamGUI/ObjectUI.py:1310 flatcamGUI/PreferencesUI.py:2988
msgid ""
"Use multiple passes to limit\n"
"the cut depth in each pass. Will\n"
"cut multiple times until Cut Z is\n"
"reached."
msgstr ""
"Use multiple passes to limit\n"
"the cut depth in each pass. Will\n"
"cut multiple times until Cut Z is\n"
"reached."

#: flatcamGUI/ObjectUI.py:1324
msgid "Depth of each pass (positive)."
msgstr "Depth of each pass (positive)."

#: flatcamGUI/ObjectUI.py:1335 flatcamGUI/PreferencesUI.py:3020
msgid ""
"Height of the tool when\n"
"moving without cutting."
msgstr ""
"Height of the tool when\n"
"moving without cutting."

#: flatcamGUI/ObjectUI.py:1357 flatcamGUI/PreferencesUI.py:3036
msgid ""
"Include tool-change sequence\n"
"in the Machine Code (Pause for tool change)."
msgstr ""
"Include tool-change sequence\n"
"in the Machine Code (Pause for tool change)."

#: flatcamGUI/ObjectUI.py:1397 flatcamGUI/PreferencesUI.py:3077
msgid "Feed Rate X-Y"
msgstr "Feed Rate X-Y"

#: flatcamGUI/ObjectUI.py:1399 flatcamGUI/PreferencesUI.py:3079
msgid ""
"Cutting speed in the XY\n"
"plane in units per minute"
msgstr ""
"Cutting speed in the XY\n"
"plane in units per minute"

#: flatcamGUI/ObjectUI.py:1411 flatcamGUI/PreferencesUI.py:3092
msgid "Feed Rate Z"
msgstr "Feed Rate Z"

#: flatcamGUI/ObjectUI.py:1413 flatcamGUI/PreferencesUI.py:3094
msgid ""
"Cutting speed in the XY\n"
"plane in units per minute.\n"
"It is called also Plunge."
msgstr ""
"Cutting speed in the XY\n"
"plane in units per minute.\n"
"It is called also Plunge."

#: flatcamGUI/ObjectUI.py:1426 flatcamGUI/PreferencesUI.py:3197
msgid "Feed Rate Rapids"
msgstr "Feed Rate Rapids"

#: flatcamGUI/ObjectUI.py:1428 flatcamGUI/PreferencesUI.py:3199
msgid ""
"Cutting speed in the XY plane\n"
"(in units per minute).\n"
"This is for the rapid move G00.\n"
"It is useful only for Marlin,\n"
"ignore for any other cases."
msgstr ""
"Cutting speed in the XY plane\n"
"(in units per minute).\n"
"This is for the rapid move G00.\n"
"It is useful only for Marlin,\n"
"ignore for any other cases."

#: flatcamGUI/ObjectUI.py:1446 flatcamGUI/PreferencesUI.py:3215
msgid "Re-cut 1st pt."
msgstr "Re-cut 1st pt."

#: flatcamGUI/ObjectUI.py:1448 flatcamGUI/PreferencesUI.py:3217
msgid ""
"In order to remove possible\n"
"copper leftovers where first cut\n"
"meet with last cut, we generate an\n"
"extended cut over the first cut section."
msgstr ""
"In order to remove possible\n"
"copper leftovers where first cut\n"
"meet with last cut, we generate an\n"
"extended cut over the first cut section."

#: flatcamGUI/ObjectUI.py:1459 flatcamGUI/PreferencesUI.py:3111
msgid ""
"Speed of the spindle in RPM (optional).\n"
"If LASER postprocessor is used,\n"
"this value is the power of laser."
msgstr ""
"Speed of the spindle in RPM (optional).\n"
"If LASER postprocessor is used,\n"
"this value is the power of laser."

#: flatcamGUI/ObjectUI.py:1491 flatcamGUI/PreferencesUI.py:5080
#: flatcamTools/ToolSolderPaste.py:275
msgid "PostProcessor"
msgstr "PostProcessor"

#: flatcamGUI/ObjectUI.py:1493 flatcamGUI/PreferencesUI.py:3145
msgid ""
"The Postprocessor file that dictates\n"
"the Machine Code (like GCode, RML, HPGL) output."
msgstr ""
"The Postprocessor file that dictates\n"
"the Machine Code (like GCode, RML, HPGL) output."

#: flatcamGUI/ObjectUI.py:1537
msgid ""
"Add at least one tool in the tool-table.\n"
"Click the header to select all, or Ctrl + LMB\n"
"for custom selection of tools."
msgstr ""
"Add at least one tool in the tool-table.\n"
"Click the header to select all, or Ctrl + LMB\n"
"for custom selection of tools."

#: flatcamGUI/ObjectUI.py:1544
msgid "Generate"
msgstr "Generate"

#: flatcamGUI/ObjectUI.py:1546
msgid "Generate the CNC Job object."
msgstr "Generate the CNC Job object."

#: flatcamGUI/ObjectUI.py:1553
msgid "Paint Area"
msgstr "Paint Area"

#: flatcamGUI/ObjectUI.py:1556 flatcamGUI/PreferencesUI.py:4148
msgid ""
"Creates tool paths to cover the\n"
"whole area of a polygon (remove\n"
"all copper). You will be asked\n"
"to click on the desired polygon."
msgstr ""
"Creates tool paths to cover the\n"
"whole area of a polygon (remove\n"
"all copper). You will be asked\n"
"to click on the desired polygon."

#: flatcamGUI/ObjectUI.py:1567
msgid "Launch Paint Tool in Tools Tab."
msgstr "Launch Paint Tool in Tools Tab."

#: flatcamGUI/ObjectUI.py:1583
msgid "CNC Job Object"
msgstr "CNC Job Object"

#: flatcamGUI/ObjectUI.py:1593 flatcamGUI/PreferencesUI.py:3384
msgid "Plot kind"
msgstr "Plot kind"

#: flatcamGUI/ObjectUI.py:1596 flatcamGUI/PreferencesUI.py:3386
msgid ""
"This selects the kind of geometries on the canvas to plot.\n"
"Those can be either of type 'Travel' which means the moves\n"
"above the work piece or it can be of type 'Cut',\n"
"which means the moves that cut into the material."
msgstr ""
"This selects the kind of geometries on the canvas to plot.\n"
"Those can be either of type 'Travel' which means the moves\n"
"above the work piece or it can be of type 'Cut',\n"
"which means the moves that cut into the material."

#: flatcamGUI/ObjectUI.py:1605 flatcamGUI/PreferencesUI.py:3394
msgid "Travel"
msgstr "Travel"

#: flatcamGUI/ObjectUI.py:1609 flatcamGUI/PreferencesUI.py:3403
msgid "Display Annotation"
msgstr "Display Annotation"

#: flatcamGUI/ObjectUI.py:1611 flatcamGUI/PreferencesUI.py:3405
msgid ""
"This selects if to display text annotation on the plot.\n"
"When checked it will display numbers in order for each end\n"
"of a travel line."
msgstr ""
"This selects if to display text annotation on the plot.\n"
"When checked it will display numbers in order for each end\n"
"of a travel line."

#: flatcamGUI/ObjectUI.py:1626
msgid "Travelled dist."
msgstr "Travelled dist."

#: flatcamGUI/ObjectUI.py:1628 flatcamGUI/ObjectUI.py:1633
msgid ""
"This is the total travelled distance on X-Y plane.\n"
"In current units."
msgstr ""
"This is the total travelled distance on X-Y plane.\n"
"In current units."

#: flatcamGUI/ObjectUI.py:1638
msgid "Estimated time"
msgstr "Estimated time"

#: flatcamGUI/ObjectUI.py:1640 flatcamGUI/ObjectUI.py:1645
msgid ""
"This is the estimated time to do the routing/drilling,\n"
"without the time spent in ToolChange events."
msgstr ""
"This is the estimated time to do the routing/drilling,\n"
"without the time spent in ToolChange events."

#: flatcamGUI/ObjectUI.py:1680
msgid "CNC Tools Table"
msgstr "CNC Tools Table"

#: flatcamGUI/ObjectUI.py:1683
msgid ""
"Tools in this CNCJob object used for cutting.\n"
"The tool diameter is used for plotting on canvas.\n"
"The 'Offset' entry will set an offset for the cut.\n"
"'Offset' can be inside, outside, on path (none) and custom.\n"
"'Type' entry is only informative and it allow to know the \n"
"intent of using the current tool. \n"
"It can be Rough(ing), Finish(ing) or Iso(lation).\n"
"The 'Tool type'(TT) can be circular with 1 to 4 teeths(C1..C4),\n"
"ball(B), or V-Shaped(V)."
msgstr ""
"Tools in this CNCJob object used for cutting.\n"
"The tool diameter is used for plotting on canvas.\n"
"The 'Offset' entry will set an offset for the cut.\n"
"'Offset' can be inside, outside, on path (none) and custom.\n"
"'Type' entry is only informative and it allow to know the \n"
"intent of using the current tool. \n"
"It can be Rough(ing), Finish(ing) or Iso(lation).\n"
"The 'Tool type'(TT) can be circular with 1 to 4 teeths(C1..C4),\n"
"ball(B), or V-Shaped(V)."

#: flatcamGUI/ObjectUI.py:1712
msgid "P"
msgstr "P"

#: flatcamGUI/ObjectUI.py:1724
msgid "Update Plot"
msgstr "Update Plot"

#: flatcamGUI/ObjectUI.py:1726
msgid "Update the plot."
msgstr "Update the plot."

#: flatcamGUI/ObjectUI.py:1733 flatcamGUI/PreferencesUI.py:3554
msgid "Export CNC Code"
msgstr "Export CNC Code"

#: flatcamGUI/ObjectUI.py:1735 flatcamGUI/PreferencesUI.py:3505
#: flatcamGUI/PreferencesUI.py:3556
msgid ""
"Export and save G-Code to\n"
"make this object to a file."
msgstr ""
"Export and save G-Code to\n"
"make this object to a file."

#: flatcamGUI/ObjectUI.py:1741
msgid "Prepend to CNC Code"
msgstr "Prepend to CNC Code"

#: flatcamGUI/ObjectUI.py:1743 flatcamGUI/PreferencesUI.py:3521
msgid ""
"Type here any G-Code commands you would\n"
"like to add at the beginning of the G-Code file."
msgstr ""
"Type here any G-Code commands you would\n"
"like to add at the beginning of the G-Code file."

#: flatcamGUI/ObjectUI.py:1752
msgid "Append to CNC Code"
msgstr "Append to CNC Code"

#: flatcamGUI/ObjectUI.py:1754 flatcamGUI/PreferencesUI.py:3533
msgid ""
"Type here any G-Code commands you would\n"
"like to append to the generated file.\n"
"I.e.: M2 (End of program)"
msgstr ""
"Type here any G-Code commands you would\n"
"like to append to the generated file.\n"
"I.e.: M2 (End of program)"

#: flatcamGUI/ObjectUI.py:1771 flatcamGUI/PreferencesUI.py:3562
msgid "Toolchange G-Code"
msgstr "Toolchange G-Code"

#: flatcamGUI/ObjectUI.py:1774 flatcamGUI/PreferencesUI.py:3565
msgid ""
"Type here any G-Code commands you would\n"
"like to be executed when Toolchange event is encountered.\n"
"This will constitute a Custom Toolchange GCode,\n"
"or a Toolchange Macro.\n"
"The FlatCAM variables are surrounded by '%' symbol.\n"
"\n"
"WARNING: it can be used only with a postprocessor file\n"
"that has 'toolchange_custom' in it's name and this is built\n"
"having as template the 'Toolchange Custom' posprocessor file."
msgstr ""
"Type here any G-Code commands you would\n"
"like to be executed when Toolchange event is encountered.\n"
"This will constitute a Custom Toolchange GCode,\n"
"or a Toolchange Macro.\n"
"The FlatCAM variables are surrounded by '%' symbol.\n"
"\n"
"WARNING: it can be used only with a postprocessor file\n"
"that has 'toolchange_custom' in it's name and this is built\n"
"having as template the 'Toolchange Custom' posprocessor file."

#: flatcamGUI/ObjectUI.py:1793 flatcamGUI/PreferencesUI.py:3593
msgid "Use Toolchange Macro"
msgstr "Use Toolchange Macro"

#: flatcamGUI/ObjectUI.py:1795 flatcamGUI/PreferencesUI.py:3595
msgid ""
"Check this box if you want to use\n"
"a Custom Toolchange GCode (macro)."
msgstr ""
"Check this box if you want to use\n"
"a Custom Toolchange GCode (macro)."

#: flatcamGUI/ObjectUI.py:1803 flatcamGUI/PreferencesUI.py:3607
msgid ""
"A list of the FlatCAM variables that can be used\n"
"in the Toolchange event.\n"
"They have to be surrounded by the '%' symbol"
msgstr ""
"A list of the FlatCAM variables that can be used\n"
"in the Toolchange event.\n"
"They have to be surrounded by the '%' symbol"

#: flatcamGUI/ObjectUI.py:1810 flatcamGUI/PreferencesUI.py:1665
#: flatcamGUI/PreferencesUI.py:2616 flatcamGUI/PreferencesUI.py:3322
#: flatcamGUI/PreferencesUI.py:3614 flatcamGUI/PreferencesUI.py:3695
#: flatcamGUI/PreferencesUI.py:3970 flatcamGUI/PreferencesUI.py:4082
#: flatcamGUI/PreferencesUI.py:4305 flatcamGUI/PreferencesUI.py:4503
#: flatcamGUI/PreferencesUI.py:4752 flatcamGUI/PreferencesUI.py:4927
#: flatcamGUI/PreferencesUI.py:5100 flatcamGUI/PreferencesUI.py:5122
#: flatcamGUI/PreferencesUI.py:5346 flatcamTools/ToolNonCopperClear.py:273
msgid "Parameters"
msgstr "Parameters"

#: flatcamGUI/ObjectUI.py:1813 flatcamGUI/PreferencesUI.py:3617
msgid "FlatCAM CNC parameters"
msgstr "FlatCAM CNC parameters"

#: flatcamGUI/ObjectUI.py:1814 flatcamGUI/PreferencesUI.py:3618
msgid "tool number"
msgstr "tool number"

#: flatcamGUI/ObjectUI.py:1815 flatcamGUI/PreferencesUI.py:3619
msgid "tool diameter"
msgstr "tool diameter"

#: flatcamGUI/ObjectUI.py:1816 flatcamGUI/PreferencesUI.py:3620
msgid "for Excellon, total number of drills"
msgstr "for Excellon, total number of drills"

#: flatcamGUI/ObjectUI.py:1818 flatcamGUI/PreferencesUI.py:3622
msgid "X coord for Toolchange"
msgstr "X coord for Toolchange"

#: flatcamGUI/ObjectUI.py:1819
msgid "Y coord for Toolchange"
msgstr "Y coord for Toolchange"

#: flatcamGUI/ObjectUI.py:1820 flatcamGUI/PreferencesUI.py:3625
msgid "Z coord for Toolchange"
msgstr "Z coord for Toolchange"

#: flatcamGUI/ObjectUI.py:1821
msgid "depth where to cut"
msgstr "depth where to cut"

#: flatcamGUI/ObjectUI.py:1822
msgid "height where to travel"
msgstr "height where to travel"

#: flatcamGUI/ObjectUI.py:1823 flatcamGUI/PreferencesUI.py:3628
msgid "the step value for multidepth cut"
msgstr "the step value for multidepth cut"

#: flatcamGUI/ObjectUI.py:1825 flatcamGUI/PreferencesUI.py:3630
msgid "the value for the spindle speed"
msgstr "the value for the spindle speed"

#: flatcamGUI/ObjectUI.py:1827
msgid "time to dwell to allow the spindle to reach it's set RPM"
msgstr "time to dwell to allow the spindle to reach it's set RPM"

#: flatcamGUI/ObjectUI.py:1843
msgid "View CNC Code"
msgstr "View CNC Code"

#: flatcamGUI/ObjectUI.py:1845
msgid ""
"Opens TAB to view/modify/print G-Code\n"
"file."
msgstr ""
"Opens TAB to view/modify/print G-Code\n"
"file."

#: flatcamGUI/ObjectUI.py:1850
msgid "Save CNC Code"
msgstr "Save CNC Code"

#: flatcamGUI/ObjectUI.py:1852
msgid ""
"Opens dialog to save G-Code\n"
"file."
msgstr ""
"Opens dialog to save G-Code\n"
"file."

#: flatcamGUI/ObjectUI.py:1872
msgid "Script Object"
msgstr "Script Object"

#: flatcamGUI/ObjectUI.py:1891 flatcamGUI/ObjectUI.py:1950
msgid "Auto Completer"
msgstr "Auto Completer"

#: flatcamGUI/ObjectUI.py:1893
msgid "This selects if the auto completer is enabled in the Script Editor."
msgstr "This selects if the auto completer is enabled in the Script Editor."

#: flatcamGUI/ObjectUI.py:1924
msgid "Document Object"
msgstr "Document Object"

#: flatcamGUI/ObjectUI.py:1952
msgid "This selects if the auto completer is enabled in the Document Editor."
msgstr "This selects if the auto completer is enabled in the Document Editor."

#: flatcamGUI/ObjectUI.py:1970
msgid "Font Type"
msgstr "Font Type"

#: flatcamGUI/ObjectUI.py:1987
msgid "Font Size"
msgstr "Font Size"

#: flatcamGUI/ObjectUI.py:2023
msgid "Alignment"
msgstr "Alignment"

#: flatcamGUI/ObjectUI.py:2028
msgid "Align Left"
msgstr "Align Left"

#: flatcamGUI/ObjectUI.py:2033
msgid "Center"
msgstr "Center"

#: flatcamGUI/ObjectUI.py:2038
msgid "Align Right"
msgstr "Align Right"

#: flatcamGUI/ObjectUI.py:2043
msgid "Justify"
msgstr "Justify"

#: flatcamGUI/ObjectUI.py:2050
msgid "Font Color"
msgstr "Font Color"

#: flatcamGUI/ObjectUI.py:2052
msgid "Set the font color for the selected text"
msgstr "Set the font color for the selected text"

#: flatcamGUI/ObjectUI.py:2066
msgid "Selection Color"
msgstr "Selection Color"

#: flatcamGUI/ObjectUI.py:2068
msgid "Set the selection color when doing text selection."
msgstr "Set the selection color when doing text selection."

#: flatcamGUI/ObjectUI.py:2082
msgid "Tab Size"
msgstr "Tab Size"

#: flatcamGUI/ObjectUI.py:2084
msgid "Set the tab size. In pixels. Default value is 80 pixels."
msgstr "Set the tab size. In pixels. Default value is 80 pixels."

#: flatcamGUI/PlotCanvasLegacy.py:1082
msgid ""
"Could not annotate due of a difference between the number of text elements "
"and the number of text positions."
msgstr ""
"Could not annotate due of a difference between the number of text elements "
"and the number of text positions."

#: flatcamGUI/PreferencesUI.py:298
msgid "GUI Preferences"
msgstr "GUI Preferences"

#: flatcamGUI/PreferencesUI.py:304
msgid "Grid X value"
msgstr "Grid X value"

#: flatcamGUI/PreferencesUI.py:306
msgid "This is the Grid snap value on X axis."
msgstr "This is the Grid snap value on X axis."

#: flatcamGUI/PreferencesUI.py:313
msgid "Grid Y value"
msgstr "Grid Y value"

#: flatcamGUI/PreferencesUI.py:315
msgid "This is the Grid snap value on Y axis."
msgstr "This is the Grid snap value on Y axis."

#: flatcamGUI/PreferencesUI.py:322
msgid "Snap Max"
msgstr "Snap Max"

#: flatcamGUI/PreferencesUI.py:329
msgid "Workspace"
msgstr "Workspace"

#: flatcamGUI/PreferencesUI.py:331
msgid ""
"Draw a delimiting rectangle on canvas.\n"
"The purpose is to illustrate the limits for our work."
msgstr ""
"Draw a delimiting rectangle on canvas.\n"
"The purpose is to illustrate the limits for our work."

#: flatcamGUI/PreferencesUI.py:334
msgid "Wk. format"
msgstr "Wk. format"

#: flatcamGUI/PreferencesUI.py:336
msgid ""
"Select the type of rectangle to be used on canvas,\n"
"as valid workspace."
msgstr ""
"Select the type of rectangle to be used on canvas,\n"
"as valid workspace."

#: flatcamGUI/PreferencesUI.py:349
msgid "Plot Fill"
msgstr "Plot Fill"

#: flatcamGUI/PreferencesUI.py:351
msgid ""
"Set the fill color for plotted objects.\n"
"First 6 digits are the color and the last 2\n"
"digits are for alpha (transparency) level."
msgstr ""
"Set the fill color for plotted objects.\n"
"First 6 digits are the color and the last 2\n"
"digits are for alpha (transparency) level."

#: flatcamGUI/PreferencesUI.py:365 flatcamGUI/PreferencesUI.py:414
#: flatcamGUI/PreferencesUI.py:463
msgid "Alpha Level"
msgstr "Alpha Level"

#: flatcamGUI/PreferencesUI.py:367
msgid "Set the fill transparency for plotted objects."
msgstr "Set the fill transparency for plotted objects."

#: flatcamGUI/PreferencesUI.py:383
msgid "Plot Line"
msgstr "Plot Line"

#: flatcamGUI/PreferencesUI.py:385
msgid "Set the line color for plotted objects."
msgstr "Set the line color for plotted objects."

#: flatcamGUI/PreferencesUI.py:397
msgid "Sel. Fill"
msgstr "Sel. Fill"

#: flatcamGUI/PreferencesUI.py:399
msgid ""
"Set the fill color for the selection box\n"
"in case that the selection is done from left to right.\n"
"First 6 digits are the color and the last 2\n"
"digits are for alpha (transparency) level."
msgstr ""
"Set the fill color for the selection box\n"
"in case that the selection is done from left to right.\n"
"First 6 digits are the color and the last 2\n"
"digits are for alpha (transparency) level."

#: flatcamGUI/PreferencesUI.py:416
msgid "Set the fill transparency for the 'left to right' selection box."
msgstr "Set the fill transparency for the 'left to right' selection box."

#: flatcamGUI/PreferencesUI.py:432
msgid "Sel. Line"
msgstr "Sel. Line"

#: flatcamGUI/PreferencesUI.py:434
msgid "Set the line color for the 'left to right' selection box."
msgstr "Set the line color for the 'left to right' selection box."

#: flatcamGUI/PreferencesUI.py:446
msgid "Sel2. Fill"
msgstr "Sel2. Fill"

#: flatcamGUI/PreferencesUI.py:448
msgid ""
"Set the fill color for the selection box\n"
"in case that the selection is done from right to left.\n"
"First 6 digits are the color and the last 2\n"
"digits are for alpha (transparency) level."
msgstr ""
"Set the fill color for the selection box\n"
"in case that the selection is done from right to left.\n"
"First 6 digits are the color and the last 2\n"
"digits are for alpha (transparency) level."

#: flatcamGUI/PreferencesUI.py:465
msgid "Set the fill transparency for selection 'right to left' box."
msgstr "Set the fill transparency for selection 'right to left' box."

#: flatcamGUI/PreferencesUI.py:481
msgid "Sel2. Line"
msgstr "Sel2. Line"

#: flatcamGUI/PreferencesUI.py:483
msgid "Set the line color for the 'right to left' selection box."
msgstr "Set the line color for the 'right to left' selection box."

#: flatcamGUI/PreferencesUI.py:495
msgid "Editor Draw"
msgstr "Editor Draw"

#: flatcamGUI/PreferencesUI.py:497
msgid "Set the color for the shape."
msgstr "Set the color for the shape."

#: flatcamGUI/PreferencesUI.py:509
msgid "Editor Draw Sel."
msgstr "Editor Draw Sel."

#: flatcamGUI/PreferencesUI.py:511
msgid "Set the color of the shape when selected."
msgstr "Set the color of the shape when selected."

#: flatcamGUI/PreferencesUI.py:523
msgid "Project Items"
msgstr "Project Items"

#: flatcamGUI/PreferencesUI.py:525
msgid "Set the color of the items in Project Tab Tree."
msgstr "Set the color of the items in Project Tab Tree."

#: flatcamGUI/PreferencesUI.py:536
msgid "Proj. Dis. Items"
msgstr "Proj. Dis. Items"

#: flatcamGUI/PreferencesUI.py:538
msgid ""
"Set the color of the items in Project Tab Tree,\n"
"for the case when the items are disabled."
msgstr ""
"Set the color of the items in Project Tab Tree,\n"
"for the case when the items are disabled."

#: flatcamGUI/PreferencesUI.py:551
msgid "Activity Icon"
msgstr "Activity Icon"

#: flatcamGUI/PreferencesUI.py:553
msgid "Select the GIF that show activity when FlatCAM is active."
msgstr "Select the GIF that show activity when FlatCAM is active."

#: flatcamGUI/PreferencesUI.py:599
msgid "GUI Settings"
msgstr "GUI Settings"

#: flatcamGUI/PreferencesUI.py:612
msgid "Theme"
msgstr "Theme"

#: flatcamGUI/PreferencesUI.py:614
msgid ""
"Select a theme for FlatCAM.\n"
"The application will restart after change."
msgstr ""
"Select a theme for FlatCAM.\n"
"The application will restart after change."

#: flatcamGUI/PreferencesUI.py:618
msgid "Light"
msgstr "Light"

#: flatcamGUI/PreferencesUI.py:619
msgid "Dark"
msgstr "Dark"

#: flatcamGUI/PreferencesUI.py:626
msgid "Layout"
msgstr "Layout"

#: flatcamGUI/PreferencesUI.py:628
msgid ""
"Select an layout for FlatCAM.\n"
"It is applied immediately."
msgstr ""
"Select an layout for FlatCAM.\n"
"It is applied immediately."

#: flatcamGUI/PreferencesUI.py:647
msgid "Style"
msgstr "Style"

#: flatcamGUI/PreferencesUI.py:649
msgid ""
"Select an style for FlatCAM.\n"
"It will be applied at the next app start."
msgstr ""
"Select an style for FlatCAM.\n"
"It will be applied at the next app start."

#: flatcamGUI/PreferencesUI.py:663
msgid "HDPI Support"
msgstr "HDPI Support"

#: flatcamGUI/PreferencesUI.py:665
msgid ""
"Enable High DPI support for FlatCAM.\n"
"It will be applied at the next app start."
msgstr ""
"Enable High DPI support for FlatCAM.\n"
"It will be applied at the next app start."

#: flatcamGUI/PreferencesUI.py:681 flatcamGUI/PreferencesUI.py:931
msgid "Clear GUI Settings"
msgstr "Clear GUI Settings"

#: flatcamGUI/PreferencesUI.py:683
msgid ""
"Clear the GUI settings for FlatCAM,\n"
"such as: layout, gui state, style, hdpi support etc."
msgstr ""
"Clear the GUI settings for FlatCAM,\n"
"such as: layout, gui state, style, hdpi support etc."

#: flatcamGUI/PreferencesUI.py:693
msgid "Hover Shape"
msgstr "Hover Shape"

#: flatcamGUI/PreferencesUI.py:695
msgid ""
"Enable display of a hover shape for FlatCAM objects.\n"
"It is displayed whenever the mouse cursor is hovering\n"
"over any kind of not-selected object."
msgstr ""
"Enable display of a hover shape for FlatCAM objects.\n"
"It is displayed whenever the mouse cursor is hovering\n"
"over any kind of not-selected object."

#: flatcamGUI/PreferencesUI.py:705
msgid "Sel. Shape"
msgstr "Sel. Shape"

#: flatcamGUI/PreferencesUI.py:707
msgid ""
"Enable the display of a selection shape for FlatCAM objects.\n"
"It is displayed whenever the mouse selects an object\n"
"either by clicking or dragging mouse from left to right or\n"
"right to left."
msgstr ""
"Enable the display of a selection shape for FlatCAM objects.\n"
"It is displayed whenever the mouse selects an object\n"
"either by clicking or dragging mouse from left to right or\n"
"right to left."

#: flatcamGUI/PreferencesUI.py:720
msgid "NB Font Size"
msgstr "NB Font Size"

#: flatcamGUI/PreferencesUI.py:722
msgid ""
"This sets the font size for the elements found in the Notebook.\n"
"The notebook is the collapsible area in the left side of the GUI,\n"
"and include the Project, Selected and Tool tabs."
msgstr ""
"This sets the font size for the elements found in the Notebook.\n"
"The notebook is the collapsible area in the left side of the GUI,\n"
"and include the Project, Selected and Tool tabs."

#: flatcamGUI/PreferencesUI.py:741
msgid "Axis Font Size"
msgstr "Axis Font Size"

#: flatcamGUI/PreferencesUI.py:743
msgid "This sets the font size for canvas axis."
msgstr "This sets the font size for canvas axis."

#: flatcamGUI/PreferencesUI.py:760
msgid "Textbox Font Size"
msgstr "Textbox Font Size"

#: flatcamGUI/PreferencesUI.py:762
msgid ""
"This sets the font size for the Textbox GUI\n"
"elements that are used in FlatCAM."
msgstr ""
"This sets the font size for the Textbox GUI\n"
"elements that are used in FlatCAM."

#: flatcamGUI/PreferencesUI.py:783
msgid "Splash Screen"
msgstr "Splash Screen"

#: flatcamGUI/PreferencesUI.py:785
msgid "Enable display of the splash screen at application startup."
msgstr "Enable display of the splash screen at application startup."

#: flatcamGUI/PreferencesUI.py:798
msgid "Sys Tray Icon"
msgstr "Sys Tray Icon"

#: flatcamGUI/PreferencesUI.py:800
msgid "Enable display of FlatCAM icon in Sys Tray."
msgstr "Enable display of FlatCAM icon in Sys Tray."

#: flatcamGUI/PreferencesUI.py:808
msgid "Shell at StartUp"
msgstr "Shell at StartUp"

#: flatcamGUI/PreferencesUI.py:810 flatcamGUI/PreferencesUI.py:815
msgid ""
"Check this box if you want the shell to\n"
"start automatically at startup."
msgstr ""
"Check this box if you want the shell to\n"
"start automatically at startup."

#: flatcamGUI/PreferencesUI.py:823
msgid "Project at StartUp"
msgstr "Project at StartUp"

#: flatcamGUI/PreferencesUI.py:825 flatcamGUI/PreferencesUI.py:830
msgid ""
"Check this box if you want the project/selected/tool tab area to\n"
"to be shown automatically at startup."
msgstr ""
"Check this box if you want the project/selected/tool tab area to\n"
"to be shown automatically at startup."

#: flatcamGUI/PreferencesUI.py:838
msgid "Project AutoHide"
msgstr "Project AutoHide"

#: flatcamGUI/PreferencesUI.py:840 flatcamGUI/PreferencesUI.py:846
msgid ""
"Check this box if you want the project/selected/tool tab area to\n"
"hide automatically when there are no objects loaded and\n"
"to show whenever a new object is created."
msgstr ""
"Check this box if you want the project/selected/tool tab area to\n"
"hide automatically when there are no objects loaded and\n"
"to show whenever a new object is created."

#: flatcamGUI/PreferencesUI.py:857
msgid "Enable ToolTips"
msgstr "Enable ToolTips"

#: flatcamGUI/PreferencesUI.py:859 flatcamGUI/PreferencesUI.py:864
msgid ""
"Check this box if you want to have toolTips displayed\n"
"when hovering with mouse over items throughout the App."
msgstr ""
"Check this box if you want to have toolTips displayed\n"
"when hovering with mouse over items throughout the App."

#: flatcamGUI/PreferencesUI.py:872
msgid "Mouse Cursor"
msgstr "Mouse Cursor"

#: flatcamGUI/PreferencesUI.py:874
msgid ""
"Choose a mouse cursor shape.\n"
"- Small -> with a customizable size.\n"
"- Big -> Infinite lines"
msgstr ""
"Choose a mouse cursor shape.\n"
"- Small -> with a customizable size.\n"
"- Big -> Infinite lines"

#: flatcamGUI/PreferencesUI.py:880
msgid "Small"
msgstr "Small"

#: flatcamGUI/PreferencesUI.py:881
msgid "Big"
msgstr "Big"

#: flatcamGUI/PreferencesUI.py:887
msgid "Mouse Cursor Size"
msgstr "Mouse Cursor Size"

#: flatcamGUI/PreferencesUI.py:889
msgid "Set the size of the mouse cursor, in pixels."
msgstr "Set the size of the mouse cursor, in pixels."

#: flatcamGUI/PreferencesUI.py:900
msgid "Delete object confirmation"
msgstr "Delete object confirmation"

#: flatcamGUI/PreferencesUI.py:902
msgid ""
"When checked the application will ask for user confirmation\n"
"whenever the Delete object(s) event is triggered, either by\n"
"menu shortcut or key shortcut."
msgstr ""
"When checked the application will ask for user confirmation\n"
"whenever the Delete object(s) event is triggered, either by\n"
"menu shortcut or key shortcut."

#: flatcamGUI/PreferencesUI.py:928
msgid "Are you sure you want to delete the GUI Settings? \n"
msgstr "Are you sure you want to delete the GUI Settings? \n"

#: flatcamGUI/PreferencesUI.py:952
msgid "App Preferences"
msgstr "App Preferences"

#: flatcamGUI/PreferencesUI.py:961 flatcamGUI/PreferencesUI.py:1244
#: flatcamGUI/PreferencesUI.py:1578 flatcamGUI/PreferencesUI.py:2479
#: flatcamTools/ToolDistance.py:42 flatcamTools/ToolDistanceMin.py:44
#: flatcamTools/ToolPcbWizard.py:126 flatcamTools/ToolProperties.py:132
msgid "Units"
msgstr "Units"

#: flatcamGUI/PreferencesUI.py:962
msgid ""
"The default value for FlatCAM units.\n"
"Whatever is selected here is set every time\n"
"FLatCAM is started."
msgstr ""
"The default value for FlatCAM units.\n"
"Whatever is selected here is set every time\n"
"FLatCAM is started."

#: flatcamGUI/PreferencesUI.py:965
msgid "IN"
msgstr "IN"

#: flatcamGUI/PreferencesUI.py:966 flatcamGUI/PreferencesUI.py:1250
#: flatcamGUI/PreferencesUI.py:1584 flatcamGUI/PreferencesUI.py:2038
#: flatcamGUI/PreferencesUI.py:2485 flatcamTools/ToolCalculators.py:61
#: flatcamTools/ToolPcbWizard.py:125
msgid "MM"
msgstr "MM"

#: flatcamGUI/PreferencesUI.py:972
msgid "Graphic Engine"
msgstr "Graphic Engine"

#: flatcamGUI/PreferencesUI.py:973
msgid ""
"Choose what graphic engine to use in FlatCAM.\n"
"Legacy(2D) -> reduced functionality, slow performance but enhanced "
"compatibility.\n"
"OpenGL(3D) -> full functionality, high performance\n"
"Some graphic cards are too old and do not work in OpenGL(3D) mode, like:\n"
"Intel HD3000 or older. In this case the plot area will be black therefore\n"
"use the Legacy(2D) mode."
msgstr ""
"Choose what graphic engine to use in FlatCAM.\n"
"Legacy(2D) -> reduced functionality, slow performance but enhanced "
"compatibility.\n"
"OpenGL(3D) -> full functionality, high performance\n"
"Some graphic cards are too old and do not work in OpenGL(3D) mode, like:\n"
"Intel HD3000 or older. In this case the plot area will be black therefore\n"
"use the Legacy(2D) mode."

#: flatcamGUI/PreferencesUI.py:979
msgid "Legacy(2D)"
msgstr "Legacy(2D)"

#: flatcamGUI/PreferencesUI.py:980
msgid "OpenGL(3D)"
msgstr "OpenGL(3D)"

#: flatcamGUI/PreferencesUI.py:987
msgid "APP. LEVEL"
msgstr "APP. LEVEL"

#: flatcamGUI/PreferencesUI.py:988
msgid ""
"Choose the default level of usage for FlatCAM.\n"
"BASIC level -> reduced functionality, best for beginner's.\n"
"ADVANCED level -> full functionality.\n"
"\n"
"The choice here will influence the parameters in\n"
"the Selected Tab for all kinds of FlatCAM objects."
msgstr ""
"Choose the default level of usage for FlatCAM.\n"
"BASIC level -> reduced functionality, best for beginner's.\n"
"ADVANCED level -> full functionality.\n"
"\n"
"The choice here will influence the parameters in\n"
"the Selected Tab for all kinds of FlatCAM objects."

#: flatcamGUI/PreferencesUI.py:1000
msgid "Portable app"
msgstr "Portable app"

#: flatcamGUI/PreferencesUI.py:1001
msgid ""
"Choose if the application should run as portable.\n"
"\n"
"If Checked the application will run portable,\n"
"which means that the preferences files will be saved\n"
"in the application folder, in the lib\\config subfolder."
msgstr ""
"Choose if the application should run as portable.\n"
"\n"
"If Checked the application will run portable,\n"
"which means that the preferences files will be saved\n"
"in the application folder, in the lib\\config subfolder."

#: flatcamGUI/PreferencesUI.py:1011
msgid "Languages"
msgstr "Languages"

#: flatcamGUI/PreferencesUI.py:1012
msgid "Set the language used throughout FlatCAM."
msgstr "Set the language used throughout FlatCAM."

#: flatcamGUI/PreferencesUI.py:1018
msgid "Apply Language"
msgstr "Apply Language"

#: flatcamGUI/PreferencesUI.py:1019
msgid ""
"Set the language used throughout FlatCAM.\n"
"The app will restart after click.Windows: When FlatCAM is installed in "
"Program Files\n"
"directory, it is possible that the app will not\n"
"restart after the button is clicked due of Windows\n"
"security features. In this case the language will be\n"
"applied at the next app start."
msgstr ""
"Set the language used throughout FlatCAM.\n"
"The app will restart after click.Windows: When FlatCAM is installed in "
"Program Files\n"
"directory, it is possible that the app will not\n"
"restart after the button is clicked due of Windows\n"
"security features. In this case the language will be\n"
"applied at the next app start."

#: flatcamGUI/PreferencesUI.py:1031
msgid "Version Check"
msgstr "Version Check"

#: flatcamGUI/PreferencesUI.py:1033 flatcamGUI/PreferencesUI.py:1038
msgid ""
"Check this box if you want to check\n"
"for a new version automatically at startup."
msgstr ""
"Check this box if you want to check\n"
"for a new version automatically at startup."

#: flatcamGUI/PreferencesUI.py:1046
msgid "Send Stats"
msgstr "Send Stats"

#: flatcamGUI/PreferencesUI.py:1048 flatcamGUI/PreferencesUI.py:1053
msgid ""
"Check this box if you agree to send anonymous\n"
"stats automatically at startup, to help improve FlatCAM."
msgstr ""
"Check this box if you agree to send anonymous\n"
"stats automatically at startup, to help improve FlatCAM."

#: flatcamGUI/PreferencesUI.py:1063
msgid "Pan Button"
msgstr "Pan Button"

#: flatcamGUI/PreferencesUI.py:1064
msgid ""
"Select the mouse button to use for panning:\n"
"- MMB --> Middle Mouse Button\n"
"- RMB --> Right Mouse Button"
msgstr ""
"Select the mouse button to use for panning:\n"
"- MMB --> Middle Mouse Button\n"
"- RMB --> Right Mouse Button"

#: flatcamGUI/PreferencesUI.py:1067
msgid "MMB"
msgstr "MMB"

#: flatcamGUI/PreferencesUI.py:1068
msgid "RMB"
msgstr "RMB"

#: flatcamGUI/PreferencesUI.py:1074
msgid "Multiple Sel"
msgstr "Multiple Sel"

#: flatcamGUI/PreferencesUI.py:1075
msgid "Select the key used for multiple selection."
msgstr "Select the key used for multiple selection."

#: flatcamGUI/PreferencesUI.py:1076
msgid "CTRL"
msgstr "CTRL"

#: flatcamGUI/PreferencesUI.py:1077
msgid "SHIFT"
msgstr "SHIFT"

#: flatcamGUI/PreferencesUI.py:1083
msgid "Workers number"
msgstr "Workers number"

#: flatcamGUI/PreferencesUI.py:1085 flatcamGUI/PreferencesUI.py:1094
msgid ""
"The number of Qthreads made available to the App.\n"
"A bigger number may finish the jobs more quickly but\n"
"depending on your computer speed, may make the App\n"
"unresponsive. Can have a value between 2 and 16.\n"
"Default value is 2.\n"
"After change, it will be applied at next App start."
msgstr ""
"The number of Qthreads made available to the App.\n"
"A bigger number may finish the jobs more quickly but\n"
"depending on your computer speed, may make the App\n"
"unresponsive. Can have a value between 2 and 16.\n"
"Default value is 2.\n"
"After change, it will be applied at next App start."

#: flatcamGUI/PreferencesUI.py:1107
msgid "Geo Tolerance"
msgstr "Geo Tolerance"

#: flatcamGUI/PreferencesUI.py:1109 flatcamGUI/PreferencesUI.py:1118
msgid ""
"This value can counter the effect of the Circle Steps\n"
"parameter. Default value is 0.01.\n"
"A lower value will increase the detail both in image\n"
"and in Gcode for the circles, with a higher cost in\n"
"performance. Higher value will provide more\n"
"performance at the expense of level of detail."
msgstr ""
"This value can counter the effect of the Circle Steps\n"
"parameter. Default value is 0.01.\n"
"A lower value will increase the detail both in image\n"
"and in Gcode for the circles, with a higher cost in\n"
"performance. Higher value will provide more\n"
"performance at the expense of level of detail."

#: flatcamGUI/PreferencesUI.py:1133
msgid "\"Open\" behavior"
msgstr "\"Open\" behavior"

#: flatcamGUI/PreferencesUI.py:1135
msgid ""
"When checked the path for the last saved file is used when saving files,\n"
"and the path for the last opened file is used when opening files.\n"
"\n"
"When unchecked the path for opening files is the one used last: either the\n"
"path for saving files or the path for opening files."
msgstr ""
"When checked the path for the last saved file is used when saving files,\n"
"and the path for the last opened file is used when opening files.\n"
"\n"
"When unchecked the path for opening files is the one used last: either the\n"
"path for saving files or the path for opening files."

#: flatcamGUI/PreferencesUI.py:1144
msgid "Save Compressed Project"
msgstr "Save Compressed Project"

#: flatcamGUI/PreferencesUI.py:1146
msgid ""
"Whether to save a compressed or uncompressed project.\n"
"When checked it will save a compressed FlatCAM project."
msgstr ""
"Whether to save a compressed or uncompressed project.\n"
"When checked it will save a compressed FlatCAM project."

#: flatcamGUI/PreferencesUI.py:1155
msgid "Compression"
msgstr "Compression"

#: flatcamGUI/PreferencesUI.py:1157
msgid ""
"The level of compression used when saving\n"
"a FlatCAM project. Higher value means better compression\n"
"but require more RAM usage and more processing time."
msgstr ""
"The level of compression used when saving\n"
"a FlatCAM project. Higher value means better compression\n"
"but require more RAM usage and more processing time."

#: flatcamGUI/PreferencesUI.py:1168
msgid "Bookmarks limit"
msgstr "Bookmarks limit"

#: flatcamGUI/PreferencesUI.py:1170
msgid ""
"The maximum number of bookmarks that may be installed in the menu.\n"
"The number of bookmarks in the bookmark manager may be greater\n"
"but the menu will hold only so much."
msgstr ""
"The maximum number of bookmarks that may be installed in the menu.\n"
"The number of bookmarks in the bookmark manager may be greater\n"
"but the menu will hold only so much."

#: flatcamGUI/PreferencesUI.py:1190
msgid "Gerber General"
msgstr "Gerber General"

#: flatcamGUI/PreferencesUI.py:1221 flatcamGUI/PreferencesUI.py:2920
#: flatcamGUI/PreferencesUI.py:3419
msgid "Circle Steps"
msgstr "Circle Steps"

#: flatcamGUI/PreferencesUI.py:1223
msgid ""
"The number of circle steps for Gerber \n"
"circular aperture linear approximation."
msgstr ""
"The number of circle steps for Gerber \n"
"circular aperture linear approximation."

#: flatcamGUI/PreferencesUI.py:1235
msgid "Default Values"
msgstr "Default Values"

#: flatcamGUI/PreferencesUI.py:1237
msgid ""
"Those values will be used as fallback values\n"
"in case that they are not found in the Gerber file."
msgstr ""
"Those values will be used as fallback values\n"
"in case that they are not found in the Gerber file."

#: flatcamGUI/PreferencesUI.py:1246 flatcamGUI/PreferencesUI.py:1252
#: flatcamGUI/PreferencesUI.py:1580 flatcamGUI/PreferencesUI.py:1586
msgid "The units used in the Gerber file."
msgstr "The units used in the Gerber file."

#: flatcamGUI/PreferencesUI.py:1249 flatcamGUI/PreferencesUI.py:1583
#: flatcamGUI/PreferencesUI.py:1939 flatcamGUI/PreferencesUI.py:2037
#: flatcamGUI/PreferencesUI.py:2484 flatcamTools/ToolCalculators.py:60
#: flatcamTools/ToolPcbWizard.py:124
msgid "INCH"
msgstr "INCH"

#: flatcamGUI/PreferencesUI.py:1259 flatcamGUI/PreferencesUI.py:1632
#: flatcamGUI/PreferencesUI.py:2552
msgid "Zeros"
msgstr "Zeros"

#: flatcamGUI/PreferencesUI.py:1262 flatcamGUI/PreferencesUI.py:1272
#: flatcamGUI/PreferencesUI.py:1635 flatcamGUI/PreferencesUI.py:1645
msgid ""
"This sets the type of Gerber zeros.\n"
"If LZ then Leading Zeros are removed and\n"
"Trailing Zeros are kept.\n"
"If TZ is checked then Trailing Zeros are removed\n"
"and Leading Zeros are kept."
msgstr ""
"This sets the type of Gerber zeros.\n"
"If LZ then Leading Zeros are removed and\n"
"Trailing Zeros are kept.\n"
"If TZ is checked then Trailing Zeros are removed\n"
"and Leading Zeros are kept."

#: flatcamGUI/PreferencesUI.py:1269 flatcamGUI/PreferencesUI.py:1642
#: flatcamGUI/PreferencesUI.py:2013 flatcamGUI/PreferencesUI.py:2562
#: flatcamTools/ToolPcbWizard.py:110
msgid "LZ"
msgstr "LZ"

#: flatcamGUI/PreferencesUI.py:1270 flatcamGUI/PreferencesUI.py:1643
#: flatcamGUI/PreferencesUI.py:2014 flatcamGUI/PreferencesUI.py:2563
#: flatcamTools/ToolPcbWizard.py:111
msgid "TZ"
msgstr "TZ"

#: flatcamGUI/PreferencesUI.py:1290
msgid "Gerber Options"
msgstr "Gerber Options"

#: flatcamGUI/PreferencesUI.py:1433
msgid "Gerber Adv. Options"
msgstr "Gerber Adv. Options"

#: flatcamGUI/PreferencesUI.py:1436 flatcamGUI/PreferencesUI.py:2338
#: flatcamGUI/PreferencesUI.py:3166
msgid "Advanced Options"
msgstr "Advanced Options"

#: flatcamGUI/PreferencesUI.py:1438
msgid ""
"A list of Gerber advanced parameters.\n"
"Those parameters are available only for\n"
"Advanced App. Level."
msgstr ""
"A list of Gerber advanced parameters.\n"
"Those parameters are available only for\n"
"Advanced App. Level."

#: flatcamGUI/PreferencesUI.py:1457
msgid "Table Show/Hide"
msgstr "Table Show/Hide"

#: flatcamGUI/PreferencesUI.py:1459
msgid ""
"Toggle the display of the Gerber Apertures Table.\n"
"Also, on hide, it will delete all mark shapes\n"
"that are drawn on canvas."
msgstr ""
"Toggle the display of the Gerber Apertures Table.\n"
"Also, on hide, it will delete all mark shapes\n"
"that are drawn on canvas."

#: flatcamGUI/PreferencesUI.py:1521
msgid ""
"Buffering type:\n"
"- None --> best performance, fast file loading but no so good display\n"
"- Full --> slow file loading but good visuals. This is the default.\n"
"<<WARNING>>: Don't change this unless you know what you are doing !!!"
msgstr ""
"Buffering type:\n"
"- None --> best performance, fast file loading but no so good display\n"
"- Full --> slow file loading but good visuals. This is the default.\n"
"<<WARNING>>: Don't change this unless you know what you are doing !!!"

#: flatcamGUI/PreferencesUI.py:1526 flatcamGUI/PreferencesUI.py:4481
#: flatcamTools/ToolFilm.py:229 flatcamTools/ToolProperties.py:297
#: flatcamTools/ToolProperties.py:311 flatcamTools/ToolProperties.py:314
#: flatcamTools/ToolProperties.py:317
msgid "None"
msgstr "None"

#: flatcamGUI/PreferencesUI.py:1527
msgid "Full"
msgstr "Full"

#: flatcamGUI/PreferencesUI.py:1532
msgid "Simplify"
msgstr "Simplify"

#: flatcamGUI/PreferencesUI.py:1534
msgid ""
"When checked all the Gerber polygons will be\n"
"loaded with simplification having a set tolerance.\n"
"<<WARNING>>: Don't change this unless you know what you are doing !!!"
msgstr ""
"When checked all the Gerber polygons will be\n"
"loaded with simplification having a set tolerance.\n"
"<<WARNING>>: Don't change this unless you know what you are doing !!!"

#: flatcamGUI/PreferencesUI.py:1541
msgid "Tolerance"
msgstr "Tolerance"

#: flatcamGUI/PreferencesUI.py:1542
msgid "Tolerance for polygon simplification."
msgstr "Tolerance for polygon simplification."

#: flatcamGUI/PreferencesUI.py:1564
msgid "Gerber Export"
msgstr "Gerber Export"

#: flatcamGUI/PreferencesUI.py:1567 flatcamGUI/PreferencesUI.py:2468
msgid "Export Options"
msgstr "Export Options"

#: flatcamGUI/PreferencesUI.py:1569
msgid ""
"The parameters set here are used in the file exported\n"
"when using the File -> Export -> Export Gerber menu entry."
msgstr ""
"The parameters set here are used in the file exported\n"
"when using the File -> Export -> Export Gerber menu entry."

#: flatcamGUI/PreferencesUI.py:1592 flatcamGUI/PreferencesUI.py:2493
msgid "Int/Decimals"
msgstr "Int/Decimals"

#: flatcamGUI/PreferencesUI.py:1594
msgid ""
"The number of digits in the whole part of the number\n"
"and in the fractional part of the number."
msgstr ""
"The number of digits in the whole part of the number\n"
"and in the fractional part of the number."

#: flatcamGUI/PreferencesUI.py:1607
msgid ""
"This numbers signify the number of digits in\n"
"the whole part of Gerber coordinates."
msgstr ""
"This numbers signify the number of digits in\n"
"the whole part of Gerber coordinates."

#: flatcamGUI/PreferencesUI.py:1623
msgid ""
"This numbers signify the number of digits in\n"
"the decimal part of Gerber coordinates."
msgstr ""
"This numbers signify the number of digits in\n"
"the decimal part of Gerber coordinates."

#: flatcamGUI/PreferencesUI.py:1667
msgid "A list of Gerber Editor parameters."
msgstr "A list of Gerber Editor parameters."

#: flatcamGUI/PreferencesUI.py:1675 flatcamGUI/PreferencesUI.py:2626
#: flatcamGUI/PreferencesUI.py:3332
msgid "Selection limit"
msgstr "Selection limit"

#: flatcamGUI/PreferencesUI.py:1677
msgid ""
"Set the number of selected Gerber geometry\n"
"items above which the utility geometry\n"
"becomes just a selection rectangle.\n"
"Increases the performance when moving a\n"
"large number of geometric elements."
msgstr ""
"Set the number of selected Gerber geometry\n"
"items above which the utility geometry\n"
"becomes just a selection rectangle.\n"
"Increases the performance when moving a\n"
"large number of geometric elements."

#: flatcamGUI/PreferencesUI.py:1690
msgid "New Aperture code"
msgstr "New Aperture code"

#: flatcamGUI/PreferencesUI.py:1703
msgid "New Aperture size"
msgstr "New Aperture size"

#: flatcamGUI/PreferencesUI.py:1705
msgid "Size for the new aperture"
msgstr "Size for the new aperture"

#: flatcamGUI/PreferencesUI.py:1716
msgid "New Aperture type"
msgstr "New Aperture type"

#: flatcamGUI/PreferencesUI.py:1718
msgid ""
"Type for the new aperture.\n"
"Can be 'C', 'R' or 'O'."
msgstr ""
"Type for the new aperture.\n"
"Can be 'C', 'R' or 'O'."

#: flatcamGUI/PreferencesUI.py:1741
msgid "Aperture Dimensions"
msgstr "Aperture Dimensions"

#: flatcamGUI/PreferencesUI.py:1743 flatcamGUI/PreferencesUI.py:2938
#: flatcamGUI/PreferencesUI.py:3707
msgid "Diameters of the cutting tools, separated by ','"
msgstr "Diameters of the cutting tools, separated by ','"

#: flatcamGUI/PreferencesUI.py:1749
msgid "Linear Pad Array"
msgstr "Linear Pad Array"

#: flatcamGUI/PreferencesUI.py:1753 flatcamGUI/PreferencesUI.py:2670
#: flatcamGUI/PreferencesUI.py:2818
msgid "Linear Direction"
msgstr "Linear Direction"

#: flatcamGUI/PreferencesUI.py:1793
msgid "Circular Pad Array"
msgstr "Circular Pad Array"

#: flatcamGUI/PreferencesUI.py:1797 flatcamGUI/PreferencesUI.py:2716
#: flatcamGUI/PreferencesUI.py:2866
msgid "Circular Direction"
msgstr "Circular Direction"

#: flatcamGUI/PreferencesUI.py:1799 flatcamGUI/PreferencesUI.py:2718
#: flatcamGUI/PreferencesUI.py:2868
msgid ""
"Direction for circular array.\n"
"Can be CW = clockwise or CCW = counter clockwise."
msgstr ""
"Direction for circular array.\n"
"Can be CW = clockwise or CCW = counter clockwise."

#: flatcamGUI/PreferencesUI.py:1810 flatcamGUI/PreferencesUI.py:2729
#: flatcamGUI/PreferencesUI.py:2879
msgid "Circular Angle"
msgstr "Circular Angle"

#: flatcamGUI/PreferencesUI.py:1829
msgid "Distance at which to buffer the Gerber element."
msgstr "Distance at which to buffer the Gerber element."

#: flatcamGUI/PreferencesUI.py:1839
msgid "Scale Tool"
msgstr "Scale Tool"

#: flatcamGUI/PreferencesUI.py:1845
msgid "Factor to scale the Gerber element."
msgstr "Factor to scale the Gerber element."

#: flatcamGUI/PreferencesUI.py:1858
msgid "Threshold low"
msgstr "Threshold low"

#: flatcamGUI/PreferencesUI.py:1860
msgid "Threshold value under which the apertures are not marked."
msgstr "Threshold value under which the apertures are not marked."

#: flatcamGUI/PreferencesUI.py:1870
msgid "Threshold high"
msgstr "Threshold high"

#: flatcamGUI/PreferencesUI.py:1872
msgid "Threshold value over which the apertures are not marked."
msgstr "Threshold value over which the apertures are not marked."

#: flatcamGUI/PreferencesUI.py:1890
msgid "Excellon General"
msgstr "Excellon General"

#: flatcamGUI/PreferencesUI.py:1912
msgid "Excellon Format"
msgstr "Excellon Format"

#: flatcamGUI/PreferencesUI.py:1914
msgid ""
"The NC drill files, usually named Excellon files\n"
"are files that can be found in different formats.\n"
"Here we set the format used when the provided\n"
"coordinates are not using period.\n"
"\n"
"Possible presets:\n"
"\n"
"PROTEUS 3:3 MM LZ\n"
"DipTrace 5:2 MM TZ\n"
"DipTrace 4:3 MM LZ\n"
"\n"
"EAGLE 3:3 MM TZ\n"
"EAGLE 4:3 MM TZ\n"
"EAGLE 2:5 INCH TZ\n"
"EAGLE 3:5 INCH TZ\n"
"\n"
"ALTIUM 2:4 INCH LZ\n"
"Sprint Layout 2:4 INCH LZ\n"
"KiCAD 3:5 INCH TZ"
msgstr ""
"The NC drill files, usually named Excellon files\n"
"are files that can be found in different formats.\n"
"Here we set the format used when the provided\n"
"coordinates are not using period.\n"
"\n"
"Possible presets:\n"
"\n"
"PROTEUS 3:3 MM LZ\n"
"DipTrace 5:2 MM TZ\n"
"DipTrace 4:3 MM LZ\n"
"\n"
"EAGLE 3:3 MM TZ\n"
"EAGLE 4:3 MM TZ\n"
"EAGLE 2:5 INCH TZ\n"
"EAGLE 3:5 INCH TZ\n"
"\n"
"ALTIUM 2:4 INCH LZ\n"
"Sprint Layout 2:4 INCH LZ\n"
"KiCAD 3:5 INCH TZ"

#: flatcamGUI/PreferencesUI.py:1942
msgid "Default values for INCH are 2:4"
msgstr "Default values for INCH are 2:4"

#: flatcamGUI/PreferencesUI.py:1949 flatcamGUI/PreferencesUI.py:1980
#: flatcamGUI/PreferencesUI.py:2507
msgid ""
"This numbers signify the number of digits in\n"
"the whole part of Excellon coordinates."
msgstr ""
"This numbers signify the number of digits in\n"
"the whole part of Excellon coordinates."

#: flatcamGUI/PreferencesUI.py:1962 flatcamGUI/PreferencesUI.py:1993
#: flatcamGUI/PreferencesUI.py:2520
msgid ""
"This numbers signify the number of digits in\n"
"the decimal part of Excellon coordinates."
msgstr ""
"This numbers signify the number of digits in\n"
"the decimal part of Excellon coordinates."

#: flatcamGUI/PreferencesUI.py:1970
msgid "METRIC"
msgstr "METRIC"

#: flatcamGUI/PreferencesUI.py:1973
msgid "Default values for METRIC are 3:3"
msgstr "Default values for METRIC are 3:3"

#: flatcamGUI/PreferencesUI.py:2002
msgid "Default <b>Zeros</b>"
msgstr "Default <b>Zeros</b>"

#: flatcamGUI/PreferencesUI.py:2005 flatcamGUI/PreferencesUI.py:2555
msgid ""
"This sets the type of Excellon zeros.\n"
"If LZ then Leading Zeros are kept and\n"
"Trailing Zeros are removed.\n"
"If TZ is checked then Trailing Zeros are kept\n"
"and Leading Zeros are removed."
msgstr ""
"This sets the type of Excellon zeros.\n"
"If LZ then Leading Zeros are kept and\n"
"Trailing Zeros are removed.\n"
"If TZ is checked then Trailing Zeros are kept\n"
"and Leading Zeros are removed."

#: flatcamGUI/PreferencesUI.py:2016
msgid ""
"This sets the default type of Excellon zeros.\n"
"If it is not detected in the parsed file the value here\n"
"will be used.If LZ then Leading Zeros are kept and\n"
"Trailing Zeros are removed.\n"
"If TZ is checked then Trailing Zeros are kept\n"
"and Leading Zeros are removed."
msgstr ""
"This sets the default type of Excellon zeros.\n"
"If it is not detected in the parsed file the value here\n"
"will be used.If LZ then Leading Zeros are kept and\n"
"Trailing Zeros are removed.\n"
"If TZ is checked then Trailing Zeros are kept\n"
"and Leading Zeros are removed."

#: flatcamGUI/PreferencesUI.py:2026
msgid "Default <b>Units</b>"
msgstr "Default <b>Units</b>"

#: flatcamGUI/PreferencesUI.py:2029
msgid ""
"This sets the default units of Excellon files.\n"
"If it is not detected in the parsed file the value here\n"
"will be used.Some Excellon files don't have an header\n"
"therefore this parameter will be used."
msgstr ""
"This sets the default units of Excellon files.\n"
"If it is not detected in the parsed file the value here\n"
"will be used.Some Excellon files don't have an header\n"
"therefore this parameter will be used."

#: flatcamGUI/PreferencesUI.py:2040
msgid ""
"This sets the units of Excellon files.\n"
"Some Excellon files don't have an header\n"
"therefore this parameter will be used."
msgstr ""
"This sets the units of Excellon files.\n"
"Some Excellon files don't have an header\n"
"therefore this parameter will be used."

#: flatcamGUI/PreferencesUI.py:2046
msgid "Update Export settings"
msgstr "Update Export settings"

#: flatcamGUI/PreferencesUI.py:2054
msgid "Excellon Optimization"
msgstr "Excellon Optimization"

#: flatcamGUI/PreferencesUI.py:2057
msgid "Algorithm:"
msgstr "Algorithm:"

#: flatcamGUI/PreferencesUI.py:2059 flatcamGUI/PreferencesUI.py:2076
msgid ""
"This sets the optimization type for the Excellon drill path.\n"
"If <<MetaHeuristic>> is checked then Google OR-Tools algorithm with\n"
"MetaHeuristic Guided Local Path is used. Default search time is 3sec.\n"
"If <<Basic>> is checked then Google OR-Tools Basic algorithm is used.\n"
"If <<TSA>> is checked then Travelling Salesman algorithm is used for\n"
"drill path optimization.\n"
"\n"
"If this control is disabled, then FlatCAM works in 32bit mode and it uses\n"
"Travelling Salesman algorithm for path optimization."
msgstr ""
"This sets the optimization type for the Excellon drill path.\n"
"If <<MetaHeuristic>> is checked then Google OR-Tools algorithm with\n"
"MetaHeuristic Guided Local Path is used. Default search time is 3sec.\n"
"If <<Basic>> is checked then Google OR-Tools Basic algorithm is used.\n"
"If <<TSA>> is checked then Travelling Salesman algorithm is used for\n"
"drill path optimization.\n"
"\n"
"If this control is disabled, then FlatCAM works in 32bit mode and it uses\n"
"Travelling Salesman algorithm for path optimization."

#: flatcamGUI/PreferencesUI.py:2071
msgid "MetaHeuristic"
msgstr "MetaHeuristic"

#: flatcamGUI/PreferencesUI.py:2073
msgid "TSA"
msgstr "TSA"

#: flatcamGUI/PreferencesUI.py:2088
msgid "Optimization Time"
msgstr "Optimization Time"

#: flatcamGUI/PreferencesUI.py:2091
msgid ""
"When OR-Tools Metaheuristic (MH) is enabled there is a\n"
"maximum threshold for how much time is spent doing the\n"
"path optimization. This max duration is set here.\n"
"In seconds."
msgstr ""
"When OR-Tools Metaheuristic (MH) is enabled there is a\n"
"maximum threshold for how much time is spent doing the\n"
"path optimization. This max duration is set here.\n"
"In seconds."

#: flatcamGUI/PreferencesUI.py:2134
msgid "Excellon Options"
msgstr "Excellon Options"

#: flatcamGUI/PreferencesUI.py:2139
msgid ""
"Parameters used to create a CNC Job object\n"
"for this drill object."
msgstr ""
"Parameters used to create a CNC Job object\n"
"for this drill object."

#: flatcamGUI/PreferencesUI.py:2183 flatcamGUI/PreferencesUI.py:3045
msgid "Toolchange Z"
msgstr "Toolchange Z"

#: flatcamGUI/PreferencesUI.py:2224
msgid "Spindle Speed"
msgstr "Spindle Speed"

#: flatcamGUI/PreferencesUI.py:2239 flatcamGUI/PreferencesUI.py:3126
msgid "Duration"
msgstr "Duration"

#: flatcamGUI/PreferencesUI.py:2269
msgid ""
"Choose what to use for GCode generation:\n"
"'Drills', 'Slots' or 'Both'.\n"
"When choosing 'Slots' or 'Both', slots will be\n"
"converted to drills."
msgstr ""
"Choose what to use for GCode generation:\n"
"'Drills', 'Slots' or 'Both'.\n"
"When choosing 'Slots' or 'Both', slots will be\n"
"converted to drills."

#: flatcamGUI/PreferencesUI.py:2319
msgid "Defaults"
msgstr "Defaults"

#: flatcamGUI/PreferencesUI.py:2332
msgid "Excellon Adv. Options"
msgstr "Excellon Adv. Options"

#: flatcamGUI/PreferencesUI.py:2340
msgid ""
"A list of Excellon advanced parameters.\n"
"Those parameters are available only for\n"
"Advanced App. Level."
msgstr ""
"A list of Excellon advanced parameters.\n"
"Those parameters are available only for\n"
"Advanced App. Level."

#: flatcamGUI/PreferencesUI.py:2361
msgid "Toolchange X,Y"
msgstr "Toolchange X,Y"

#: flatcamGUI/PreferencesUI.py:2363 flatcamGUI/PreferencesUI.py:3180
msgid "Toolchange X,Y position."
msgstr "Toolchange X,Y position."

#: flatcamGUI/PreferencesUI.py:2420 flatcamGUI/PreferencesUI.py:3254
msgid "Spindle dir."
msgstr "Spindle dir."

#: flatcamGUI/PreferencesUI.py:2422 flatcamGUI/PreferencesUI.py:3256
msgid ""
"This sets the direction that the spindle is rotating.\n"
"It can be either:\n"
"- CW = clockwise or\n"
"- CCW = counter clockwise"
msgstr ""
"This sets the direction that the spindle is rotating.\n"
"It can be either:\n"
"- CW = clockwise or\n"
"- CCW = counter clockwise"

#: flatcamGUI/PreferencesUI.py:2433 flatcamGUI/PreferencesUI.py:3268
msgid "Fast Plunge"
msgstr "Fast Plunge"

#: flatcamGUI/PreferencesUI.py:2435 flatcamGUI/PreferencesUI.py:3270
msgid ""
"By checking this, the vertical move from\n"
"Z_Toolchange to Z_move is done with G0,\n"
"meaning the fastest speed available.\n"
"WARNING: the move is done at Toolchange X,Y coords."
msgstr ""
"By checking this, the vertical move from\n"
"Z_Toolchange to Z_move is done with G0,\n"
"meaning the fastest speed available.\n"
"WARNING: the move is done at Toolchange X,Y coords."

#: flatcamGUI/PreferencesUI.py:2444
msgid "Fast Retract"
msgstr "Fast Retract"

#: flatcamGUI/PreferencesUI.py:2446
msgid ""
"Exit hole strategy.\n"
" - When uncheked, while exiting the drilled hole the drill bit\n"
"will travel slow, with set feedrate (G1), up to zero depth and then\n"
"travel as fast as possible (G0) to the Z Move (travel height).\n"
" - When checked the travel from Z cut (cut depth) to Z_move\n"
"(travel height) is done as fast as possible (G0) in one move."
msgstr ""
"Exit hole strategy.\n"
" - When uncheked, while exiting the drilled hole the drill bit\n"
"will travel slow, with set feedrate (G1), up to zero depth and then\n"
"travel as fast as possible (G0) to the Z Move (travel height).\n"
" - When checked the travel from Z cut (cut depth) to Z_move\n"
"(travel height) is done as fast as possible (G0) in one move."

#: flatcamGUI/PreferencesUI.py:2465
msgid "Excellon Export"
msgstr "Excellon Export"

#: flatcamGUI/PreferencesUI.py:2470
msgid ""
"The parameters set here are used in the file exported\n"
"when using the File -> Export -> Export Excellon menu entry."
msgstr ""
"The parameters set here are used in the file exported\n"
"when using the File -> Export -> Export Excellon menu entry."

#: flatcamGUI/PreferencesUI.py:2481 flatcamGUI/PreferencesUI.py:2487
msgid "The units used in the Excellon file."
msgstr "The units used in the Excellon file."

#: flatcamGUI/PreferencesUI.py:2495
msgid ""
"The NC drill files, usually named Excellon files\n"
"are files that can be found in different formats.\n"
"Here we set the format used when the provided\n"
"coordinates are not using period."
msgstr ""
"The NC drill files, usually named Excellon files\n"
"are files that can be found in different formats.\n"
"Here we set the format used when the provided\n"
"coordinates are not using period."

#: flatcamGUI/PreferencesUI.py:2529
msgid "Format"
msgstr "Format"

#: flatcamGUI/PreferencesUI.py:2531 flatcamGUI/PreferencesUI.py:2541
msgid ""
"Select the kind of coordinates format used.\n"
"Coordinates can be saved with decimal point or without.\n"
"When there is no decimal point, it is required to specify\n"
"the number of digits for integer part and the number of decimals.\n"
"Also it will have to be specified if LZ = leading zeros are kept\n"
"or TZ = trailing zeros are kept."
msgstr ""
"Select the kind of coordinates format used.\n"
"Coordinates can be saved with decimal point or without.\n"
"When there is no decimal point, it is required to specify\n"
"the number of digits for integer part and the number of decimals.\n"
"Also it will have to be specified if LZ = leading zeros are kept\n"
"or TZ = trailing zeros are kept."

#: flatcamGUI/PreferencesUI.py:2538
msgid "Decimal"
msgstr "Decimal"

#: flatcamGUI/PreferencesUI.py:2539
msgid "No-Decimal"
msgstr "No-Decimal"

#: flatcamGUI/PreferencesUI.py:2565
msgid ""
"This sets the default type of Excellon zeros.\n"
"If LZ then Leading Zeros are kept and\n"
"Trailing Zeros are removed.\n"
"If TZ is checked then Trailing Zeros are kept\n"
"and Leading Zeros are removed."
msgstr ""
"This sets the default type of Excellon zeros.\n"
"If LZ then Leading Zeros are kept and\n"
"Trailing Zeros are removed.\n"
"If TZ is checked then Trailing Zeros are kept\n"
"and Leading Zeros are removed."

#: flatcamGUI/PreferencesUI.py:2575
msgid "Slot type"
msgstr "Slot type"

#: flatcamGUI/PreferencesUI.py:2578 flatcamGUI/PreferencesUI.py:2588
msgid ""
"This sets how the slots will be exported.\n"
"If ROUTED then the slots will be routed\n"
"using M15/M16 commands.\n"
"If DRILLED(G85) the slots will be exported\n"
"using the Drilled slot command (G85)."
msgstr ""
"This sets how the slots will be exported.\n"
"If ROUTED then the slots will be routed\n"
"using M15/M16 commands.\n"
"If DRILLED(G85) the slots will be exported\n"
"using the Drilled slot command (G85)."

#: flatcamGUI/PreferencesUI.py:2585
msgid "Routed"
msgstr "Routed"

#: flatcamGUI/PreferencesUI.py:2586
msgid "Drilled(G85)"
msgstr "Drilled(G85)"

#: flatcamGUI/PreferencesUI.py:2618
msgid "A list of Excellon Editor parameters."
msgstr "A list of Excellon Editor parameters."

#: flatcamGUI/PreferencesUI.py:2628
msgid ""
"Set the number of selected Excellon geometry\n"
"items above which the utility geometry\n"
"becomes just a selection rectangle.\n"
"Increases the performance when moving a\n"
"large number of geometric elements."
msgstr ""
"Set the number of selected Excellon geometry\n"
"items above which the utility geometry\n"
"becomes just a selection rectangle.\n"
"Increases the performance when moving a\n"
"large number of geometric elements."

#: flatcamGUI/PreferencesUI.py:2641
msgid "New Tool Dia"
msgstr "New Tool Dia"

#: flatcamGUI/PreferencesUI.py:2666
msgid "Linear Drill Array"
msgstr "Linear Drill Array"

#: flatcamGUI/PreferencesUI.py:2712
msgid "Circular Drill Array"
msgstr "Circular Drill Array"

#: flatcamGUI/PreferencesUI.py:2801
msgid "Linear Slot Array"
msgstr "Linear Slot Array"

#: flatcamGUI/PreferencesUI.py:2862
msgid "Circular Slot Array"
msgstr "Circular Slot Array"

#: flatcamGUI/PreferencesUI.py:2901
msgid "Geometry General"
msgstr "Geometry General"

#: flatcamGUI/PreferencesUI.py:2922
msgid ""
"The number of circle steps for <b>Geometry</b> \n"
"circle and arc shapes linear approximation."
msgstr ""
"The number of circle steps for <b>Geometry</b> \n"
"circle and arc shapes linear approximation."

#: flatcamGUI/PreferencesUI.py:2953
msgid "Geometry Options"
msgstr "Geometry Options"

#: flatcamGUI/PreferencesUI.py:2960
msgid ""
"Create a CNC Job object\n"
"tracing the contours of this\n"
"Geometry object."
msgstr ""
"Create a CNC Job object\n"
"tracing the contours of this\n"
"Geometry object."

#: flatcamGUI/PreferencesUI.py:2997
msgid "Depth/Pass"
msgstr "Depth/Pass"

#: flatcamGUI/PreferencesUI.py:2999
msgid ""
"The depth to cut on each pass,\n"
"when multidepth is enabled.\n"
"It has positive value although\n"
"it is a fraction from the depth\n"
"which has negative value."
msgstr ""
"The depth to cut on each pass,\n"
"when multidepth is enabled.\n"
"It has positive value although\n"
"it is a fraction from the depth\n"
"which has negative value."

#: flatcamGUI/PreferencesUI.py:3161
msgid "Geometry Adv. Options"
msgstr "Geometry Adv. Options"

#: flatcamGUI/PreferencesUI.py:3168
msgid ""
"A list of Geometry advanced parameters.\n"
"Those parameters are available only for\n"
"Advanced App. Level."
msgstr ""
"A list of Geometry advanced parameters.\n"
"Those parameters are available only for\n"
"Advanced App. Level."

#: flatcamGUI/PreferencesUI.py:3178 flatcamGUI/PreferencesUI.py:5003
#: flatcamTools/ToolSolderPaste.py:206
msgid "Toolchange X-Y"
msgstr "Toolchange X-Y"

#: flatcamGUI/PreferencesUI.py:3189
msgid ""
"Height of the tool just after starting the work.\n"
"Delete the value if you don't need this feature."
msgstr ""
"Height of the tool just after starting the work.\n"
"Delete the value if you don't need this feature."

#: flatcamGUI/PreferencesUI.py:3280
msgid "Seg. X size"
msgstr "Seg. X size"

#: flatcamGUI/PreferencesUI.py:3282
msgid ""
"The size of the trace segment on the X axis.\n"
"Useful for auto-leveling.\n"
"A value of 0 means no segmentation on the X axis."
msgstr ""
"The size of the trace segment on the X axis.\n"
"Useful for auto-leveling.\n"
"A value of 0 means no segmentation on the X axis."

#: flatcamGUI/PreferencesUI.py:3296
msgid "Seg. Y size"
msgstr "Seg. Y size"

#: flatcamGUI/PreferencesUI.py:3298
msgid ""
"The size of the trace segment on the Y axis.\n"
"Useful for auto-leveling.\n"
"A value of 0 means no segmentation on the Y axis."
msgstr ""
"The size of the trace segment on the Y axis.\n"
"Useful for auto-leveling.\n"
"A value of 0 means no segmentation on the Y axis."

#: flatcamGUI/PreferencesUI.py:3319
msgid "Geometry Editor"
msgstr "Geometry Editor"

#: flatcamGUI/PreferencesUI.py:3324
msgid "A list of Geometry Editor parameters."
msgstr "A list of Geometry Editor parameters."

#: flatcamGUI/PreferencesUI.py:3334
msgid ""
"Set the number of selected geometry\n"
"items above which the utility geometry\n"
"becomes just a selection rectangle.\n"
"Increases the performance when moving a\n"
"large number of geometric elements."
msgstr ""
"Set the number of selected geometry\n"
"items above which the utility geometry\n"
"becomes just a selection rectangle.\n"
"Increases the performance when moving a\n"
"large number of geometric elements."

#: flatcamGUI/PreferencesUI.py:3366
msgid "CNC Job General"
msgstr "CNC Job General"

#: flatcamGUI/PreferencesUI.py:3421
msgid ""
"The number of circle steps for <b>GCode</b> \n"
"circle and arc shapes linear approximation."
msgstr ""
"The number of circle steps for <b>GCode</b> \n"
"circle and arc shapes linear approximation."

#: flatcamGUI/PreferencesUI.py:3430
msgid "Travel dia"
msgstr "Travel dia"

#: flatcamGUI/PreferencesUI.py:3432
msgid ""
"The width of the travel lines to be\n"
"rendered in the plot."
msgstr ""
"The width of the travel lines to be\n"
"rendered in the plot."

#: flatcamGUI/PreferencesUI.py:3448
msgid "Coordinates decimals"
msgstr "Coordinates decimals"

#: flatcamGUI/PreferencesUI.py:3450
msgid ""
"The number of decimals to be used for \n"
"the X, Y, Z coordinates in CNC code (GCODE, etc.)"
msgstr ""
"The number of decimals to be used for \n"
"the X, Y, Z coordinates in CNC code (GCODE, etc.)"

#: flatcamGUI/PreferencesUI.py:3461
msgid "Feedrate decimals"
msgstr "Feedrate decimals"

#: flatcamGUI/PreferencesUI.py:3463
msgid ""
"The number of decimals to be used for \n"
"the Feedrate parameter in CNC code (GCODE, etc.)"
msgstr ""
"The number of decimals to be used for \n"
"the Feedrate parameter in CNC code (GCODE, etc.)"

#: flatcamGUI/PreferencesUI.py:3474
msgid "Coordinates type"
msgstr "Coordinates type"

#: flatcamGUI/PreferencesUI.py:3476
msgid ""
"The type of coordinates to be used in Gcode.\n"
"Can be:\n"
"- Absolute G90 -> the reference is the origin x=0, y=0\n"
"- Incremental G91 -> the reference is the previous position"
msgstr ""
"The type of coordinates to be used in Gcode.\n"
"Can be:\n"
"- Absolute G90 -> the reference is the origin x=0, y=0\n"
"- Incremental G91 -> the reference is the previous position"

#: flatcamGUI/PreferencesUI.py:3482
msgid "Absolute G90"
msgstr "Absolute G90"

#: flatcamGUI/PreferencesUI.py:3483
msgid "Incremental G91"
msgstr "Incremental G91"

#: flatcamGUI/PreferencesUI.py:3500
msgid "CNC Job Options"
msgstr "CNC Job Options"

#: flatcamGUI/PreferencesUI.py:3503
msgid "Export G-Code"
msgstr "Export G-Code"

#: flatcamGUI/PreferencesUI.py:3519
msgid "Prepend to G-Code"
msgstr "Prepend to G-Code"

#: flatcamGUI/PreferencesUI.py:3531
msgid "Append to G-Code"
msgstr "Append to G-Code"

#: flatcamGUI/PreferencesUI.py:3551
msgid "CNC Job Adv. Options"
msgstr "CNC Job Adv. Options"

#: flatcamGUI/PreferencesUI.py:3623
msgid "y_toolchange = Y coord for Toolchange"
msgstr "y_toolchange = Y coord for Toolchange"

#: flatcamGUI/PreferencesUI.py:3626
msgid "Z depth for the cut"
msgstr "Z depth for the cut"

#: flatcamGUI/PreferencesUI.py:3627
msgid "Z height for travel"
msgstr "Z height for travel"

#: flatcamGUI/PreferencesUI.py:3633
msgid "dwelltime = time to dwell to allow the spindle to reach it's set RPM"
msgstr "dwelltime = time to dwell to allow the spindle to reach it's set RPM"

#: flatcamGUI/PreferencesUI.py:3652
msgid "Annotation Size"
msgstr "Annotation Size"

#: flatcamGUI/PreferencesUI.py:3654
msgid "The font size of the annotation text. In pixels."
msgstr "The font size of the annotation text. In pixels."

#: flatcamGUI/PreferencesUI.py:3664
msgid "Annotation Color"
msgstr "Annotation Color"

#: flatcamGUI/PreferencesUI.py:3666
msgid "Set the font color for the annotation texts."
msgstr "Set the font color for the annotation texts."

#: flatcamGUI/PreferencesUI.py:3692
msgid "NCC Tool Options"
msgstr "NCC Tool Options"

#: flatcamGUI/PreferencesUI.py:3705 flatcamGUI/PreferencesUI.py:4938
msgid "Tools dia"
msgstr "Tools dia"

#: flatcamGUI/PreferencesUI.py:3716 flatcamGUI/PreferencesUI.py:3724
#: flatcamTools/ToolNonCopperClear.py:197
#: flatcamTools/ToolNonCopperClear.py:205
msgid ""
"Default tool type:\n"
"- 'V-shape'\n"
"- Circular"
msgstr ""
"Default tool type:\n"
"- 'V-shape'\n"
"- Circular"

#: flatcamGUI/PreferencesUI.py:3721 flatcamTools/ToolNonCopperClear.py:202
msgid "V-shape"
msgstr "V-shape"

#: flatcamGUI/PreferencesUI.py:3761 flatcamGUI/PreferencesUI.py:3769
#: flatcamTools/ToolNonCopperClear.py:149
#: flatcamTools/ToolNonCopperClear.py:157
msgid ""
"Milling type when the selected tool is of type: 'iso_op':\n"
"- climb / best for precision milling and to reduce tool usage\n"
"- conventional / useful when there is no backlash compensation"
msgstr ""
"Milling type when the selected tool is of type: 'iso_op':\n"
"- climb / best for precision milling and to reduce tool usage\n"
"- conventional / useful when there is no backlash compensation"

#: flatcamGUI/PreferencesUI.py:3778 flatcamGUI/PreferencesUI.py:4170
#: flatcamTools/ToolNonCopperClear.py:163 flatcamTools/ToolPaint.py:136
msgid "Tool order"
msgstr "Tool order"

#: flatcamGUI/PreferencesUI.py:3779 flatcamGUI/PreferencesUI.py:3789
#: flatcamGUI/PreferencesUI.py:4171 flatcamGUI/PreferencesUI.py:4181
#: flatcamTools/ToolNonCopperClear.py:164
#: flatcamTools/ToolNonCopperClear.py:174 flatcamTools/ToolPaint.py:137
#: flatcamTools/ToolPaint.py:147
msgid ""
"This set the way that the tools in the tools table are used.\n"
"'No' --> means that the used order is the one in the tool table\n"
"'Forward' --> means that the tools will be ordered from small to big\n"
"'Reverse' --> menas that the tools will ordered from big to small\n"
"\n"
"WARNING: using rest machining will automatically set the order\n"
"in reverse and disable this control."
msgstr ""
"This set the way that the tools in the tools table are used.\n"
"'No' --> means that the used order is the one in the tool table\n"
"'Forward' --> means that the tools will be ordered from small to big\n"
"'Reverse' --> menas that the tools will ordered from big to small\n"
"\n"
"WARNING: using rest machining will automatically set the order\n"
"in reverse and disable this control."

#: flatcamGUI/PreferencesUI.py:3787 flatcamGUI/PreferencesUI.py:4179
#: flatcamTools/ToolNonCopperClear.py:172 flatcamTools/ToolPaint.py:145
msgid "Forward"
msgstr "Forward"

#: flatcamGUI/PreferencesUI.py:3788 flatcamGUI/PreferencesUI.py:4180
#: flatcamTools/ToolNonCopperClear.py:173 flatcamTools/ToolPaint.py:146
msgid "Reverse"
msgstr "Reverse"

#: flatcamGUI/PreferencesUI.py:3801 flatcamGUI/PreferencesUI.py:3810
#: flatcamTools/ToolNonCopperClear.py:279
#: flatcamTools/ToolNonCopperClear.py:287
msgid ""
"Depth of cut into material. Negative value.\n"
"In FlatCAM units."
msgstr ""
"Depth of cut into material. Negative value.\n"
"In FlatCAM units."

#: flatcamGUI/PreferencesUI.py:3820 flatcamTools/ToolNonCopperClear.py:296
#, python-format
msgid ""
"How much (fraction) of the tool width to overlap each tool pass.\n"
"Example:\n"
"A value here of 0.25 means 25%% from the tool diameter found above.\n"
"\n"
"Adjust the value starting with lower values\n"
"and increasing it if areas that should be cleared are still \n"
"not cleared.\n"
"Lower values = faster processing, faster execution on PCB.\n"
"Higher values = slow processing and slow execution on CNC\n"
"due of too many paths."
msgstr ""
"How much (fraction) of the tool width to overlap each tool pass.\n"
"Example:\n"
"A value here of 0.25 means 25%% from the tool diameter found above.\n"
"\n"
"Adjust the value starting with lower values\n"
"and increasing it if areas that should be cleared are still \n"
"not cleared.\n"
"Lower values = faster processing, faster execution on PCB.\n"
"Higher values = slow processing and slow execution on CNC\n"
"due of too many paths."

#: flatcamGUI/PreferencesUI.py:3841 flatcamTools/ToolNonCopperClear.py:316
msgid "Bounding box margin."
msgstr "Bounding box margin."

#: flatcamGUI/PreferencesUI.py:3854 flatcamGUI/PreferencesUI.py:4230
#: flatcamTools/ToolNonCopperClear.py:327
msgid ""
"Algorithm for non-copper clearing:<BR><B>Standard</B>: Fixed step inwards."
"<BR><B>Seed-based</B>: Outwards from seed.<BR><B>Line-based</B>: Parallel "
"lines."
msgstr ""
"Algorithm for non-copper clearing:<BR><B>Standard</B>: Fixed step inwards."
"<BR><B>Seed-based</B>: Outwards from seed.<BR><B>Line-based</B>: Parallel "
"lines."

#: flatcamGUI/PreferencesUI.py:3868 flatcamGUI/PreferencesUI.py:4244
#: flatcamTools/ToolNonCopperClear.py:341 flatcamTools/ToolPaint.py:252
msgid "Connect"
msgstr "Connect"

#: flatcamGUI/PreferencesUI.py:3878 flatcamGUI/PreferencesUI.py:4254
#: flatcamTools/ToolNonCopperClear.py:350 flatcamTools/ToolPaint.py:261
msgid "Contour"
msgstr "Contour"

#: flatcamGUI/PreferencesUI.py:3888 flatcamTools/ToolNonCopperClear.py:359
#: flatcamTools/ToolPaint.py:270
msgid "Rest M."
msgstr "Rest M."

#: flatcamGUI/PreferencesUI.py:3890 flatcamTools/ToolNonCopperClear.py:361
msgid ""
"If checked, use 'rest machining'.\n"
"Basically it will clear copper outside PCB features,\n"
"using the biggest tool and continue with the next tools,\n"
"from bigger to smaller, to clear areas of copper that\n"
"could not be cleared by previous tool, until there is\n"
"no more copper to clear or there are no more tools.\n"
"If not checked, use the standard algorithm."
msgstr ""
"If checked, use 'rest machining'.\n"
"Basically it will clear copper outside PCB features,\n"
"using the biggest tool and continue with the next tools,\n"
"from bigger to smaller, to clear areas of copper that\n"
"could not be cleared by previous tool, until there is\n"
"no more copper to clear or there are no more tools.\n"
"If not checked, use the standard algorithm."

#: flatcamGUI/PreferencesUI.py:3905 flatcamGUI/PreferencesUI.py:3917
#: flatcamTools/ToolNonCopperClear.py:376
#: flatcamTools/ToolNonCopperClear.py:388
msgid ""
"If used, it will add an offset to the copper features.\n"
"The copper clearing will finish to a distance\n"
"from the copper features.\n"
"The value can be between 0 and 10 FlatCAM units."
msgstr ""
"If used, it will add an offset to the copper features.\n"
"The copper clearing will finish to a distance\n"
"from the copper features.\n"
"The value can be between 0 and 10 FlatCAM units."

#: flatcamGUI/PreferencesUI.py:3915 flatcamTools/ToolNonCopperClear.py:386
msgid "Offset value"
msgstr "Offset value"

#: flatcamGUI/PreferencesUI.py:3932 flatcamTools/ToolNonCopperClear.py:412
msgid "Itself"
msgstr "Itself"

#: flatcamGUI/PreferencesUI.py:3933 flatcamGUI/PreferencesUI.py:4275
msgid "Area"
msgstr "Area"

#: flatcamGUI/PreferencesUI.py:3934
msgid "Ref"
msgstr "Ref"

#: flatcamGUI/PreferencesUI.py:3935 flatcamGUI/PreferencesUI.py:4454
#: flatcamTools/ToolFilm.py:199
msgid "Reference"
msgstr "Reference"

#: flatcamGUI/PreferencesUI.py:3937 flatcamTools/ToolNonCopperClear.py:418
msgid ""
"- 'Itself' -  the non copper clearing extent\n"
"is based on the object that is copper cleared.\n"
" - 'Area Selection' - left mouse click to start selection of the area to be "
"painted.\n"
"Keeping a modifier key pressed (CTRL or SHIFT) will allow to add multiple "
"areas.\n"
"- 'Reference Object' -  will do non copper clearing within the area\n"
"specified by another object."
msgstr ""
"- 'Itself' -  the non copper clearing extent\n"
"is based on the object that is copper cleared.\n"
" - 'Area Selection' - left mouse click to start selection of the area to be "
"painted.\n"
"Keeping a modifier key pressed (CTRL or SHIFT) will allow to add multiple "
"areas.\n"
"- 'Reference Object' -  will do non copper clearing within the area\n"
"specified by another object."

#: flatcamGUI/PreferencesUI.py:3948 flatcamGUI/PreferencesUI.py:4283
msgid "Normal"
msgstr "Normal"

#: flatcamGUI/PreferencesUI.py:3949 flatcamGUI/PreferencesUI.py:4284
msgid "Progressive"
msgstr "Progressive"

#: flatcamGUI/PreferencesUI.py:3950
msgid "NCC Plotting"
msgstr "NCC Plotting"

#: flatcamGUI/PreferencesUI.py:3952
msgid ""
"- 'Normal' -  normal plotting, done at the end of the NCC job\n"
"- 'Progressive' - after each shape is generated it will be plotted."
msgstr ""
"- 'Normal' -  normal plotting, done at the end of the NCC job\n"
"- 'Progressive' - after each shape is generated it will be plotted."

#: flatcamGUI/PreferencesUI.py:3966
msgid "Cutout Tool Options"
msgstr "Cutout Tool Options"

#: flatcamGUI/PreferencesUI.py:3983 flatcamTools/ToolCutOut.py:103
msgid ""
"Diameter of the tool used to cutout\n"
"the PCB shape out of the surrounding material."
msgstr ""
"Diameter of the tool used to cutout\n"
"the PCB shape out of the surrounding material."

#: flatcamGUI/PreferencesUI.py:3995 flatcamTools/ToolCutOut.py:84
msgid "Obj kind"
msgstr "Obj kind"

#: flatcamGUI/PreferencesUI.py:3997 flatcamTools/ToolCutOut.py:86
msgid ""
"Choice of what kind the object we want to cutout is.<BR>- <B>Single</B>: "
"contain a single PCB Gerber outline object.<BR>- <B>Panel</B>: a panel PCB "
"Gerber object, which is made\n"
"out of many individual PCB outlines."
msgstr ""
"Choice of what kind the object we want to cutout is.<BR>- <B>Single</B>: "
"contain a single PCB Gerber outline object.<BR>- <B>Panel</B>: a panel PCB "
"Gerber object, which is made\n"
"out of many individual PCB outlines."

#: flatcamGUI/PreferencesUI.py:4004 flatcamGUI/PreferencesUI.py:4274
#: flatcamTools/ToolCutOut.py:92
msgid "Single"
msgstr "Single"

#: flatcamGUI/PreferencesUI.py:4005 flatcamTools/ToolCutOut.py:93
msgid "Panel"
msgstr "Panel"

#: flatcamGUI/PreferencesUI.py:4011 flatcamTools/ToolCutOut.py:114
msgid ""
"Margin over bounds. A positive value here\n"
"will make the cutout of the PCB further from\n"
"the actual PCB border"
msgstr ""
"Margin over bounds. A positive value here\n"
"will make the cutout of the PCB further from\n"
"the actual PCB border"

#: flatcamGUI/PreferencesUI.py:4023
msgid "Gap size"
msgstr "Gap size"

#: flatcamGUI/PreferencesUI.py:4025 flatcamTools/ToolCutOut.py:126
msgid ""
"The size of the bridge gaps in the cutout\n"
"used to keep the board connected to\n"
"the surrounding material (the one \n"
"from which the PCB is cutout)."
msgstr ""
"The size of the bridge gaps in the cutout\n"
"used to keep the board connected to\n"
"the surrounding material (the one \n"
"from which the PCB is cutout)."

#: flatcamGUI/PreferencesUI.py:4038 flatcamTools/ToolCutOut.py:162
msgid "Gaps"
msgstr "Gaps"

#: flatcamGUI/PreferencesUI.py:4040
msgid ""
"Number of gaps used for the cutout.\n"
"There can be maximum 8 bridges/gaps.\n"
"The choices are:\n"
"- None  - no gaps\n"
"- lr    - left + right\n"
"- tb    - top + bottom\n"
"- 4     - left + right +top + bottom\n"
"- 2lr   - 2*left + 2*right\n"
"- 2tb  - 2*top + 2*bottom\n"
"- 8     - 2*left + 2*right +2*top + 2*bottom"
msgstr ""
"Number of gaps used for the cutout.\n"
"There can be maximum 8 bridges/gaps.\n"
"The choices are:\n"
"- None  - no gaps\n"
"- lr    - left + right\n"
"- tb    - top + bottom\n"
"- 4     - left + right +top + bottom\n"
"- 2lr   - 2*left + 2*right\n"
"- 2tb  - 2*top + 2*bottom\n"
"- 8     - 2*left + 2*right +2*top + 2*bottom"

#: flatcamGUI/PreferencesUI.py:4062 flatcamTools/ToolCutOut.py:143
msgid "Convex Sh."
msgstr "Convex Sh."

#: flatcamGUI/PreferencesUI.py:4064 flatcamTools/ToolCutOut.py:145
msgid ""
"Create a convex shape surrounding the entire PCB.\n"
"Used only if the source object type is Gerber."
msgstr ""
"Create a convex shape surrounding the entire PCB.\n"
"Used only if the source object type is Gerber."

#: flatcamGUI/PreferencesUI.py:4078
msgid "2Sided Tool Options"
msgstr "2Sided Tool Options"

#: flatcamGUI/PreferencesUI.py:4084
msgid ""
"A tool to help in creating a double sided\n"
"PCB using alignment holes."
msgstr ""
"A tool to help in creating a double sided\n"
"PCB using alignment holes."

#: flatcamGUI/PreferencesUI.py:4098 flatcamTools/ToolDblSided.py:240
msgid "Drill dia"
msgstr "Drill dia"

#: flatcamGUI/PreferencesUI.py:4100 flatcamTools/ToolDblSided.py:231
#: flatcamTools/ToolDblSided.py:242
msgid "Diameter of the drill for the alignment holes."
msgstr "Diameter of the drill for the alignment holes."

#: flatcamGUI/PreferencesUI.py:4109 flatcamTools/ToolDblSided.py:121
msgid "Mirror Axis:"
msgstr "Mirror Axis:"

#: flatcamGUI/PreferencesUI.py:4111 flatcamTools/ToolDblSided.py:123
msgid "Mirror vertically (X) or horizontally (Y)."
msgstr "Mirror vertically (X) or horizontally (Y)."

#: flatcamGUI/PreferencesUI.py:4120 flatcamTools/ToolDblSided.py:132
msgid "Point"
msgstr "Point"

#: flatcamGUI/PreferencesUI.py:4121 flatcamTools/ToolDblSided.py:133
msgid "Box"
msgstr "Box"

#: flatcamGUI/PreferencesUI.py:4122
msgid "Axis Ref"
msgstr "Axis Ref"

#: flatcamGUI/PreferencesUI.py:4124 flatcamTools/ToolDblSided.py:136
msgid ""
"The axis should pass through a <b>point</b> or cut\n"
" a specified <b>box</b> (in a FlatCAM object) through \n"
"the center."
msgstr ""
"The axis should pass through a <b>point</b> or cut\n"
" a specified <b>box</b> (in a FlatCAM object) through \n"
"the center."

#: flatcamGUI/PreferencesUI.py:4140
msgid "Paint Tool Options"
msgstr "Paint Tool Options"

#: flatcamGUI/PreferencesUI.py:4146
msgid "<b>Parameters:</b>"
msgstr "<b>Parameters:</b>"

#: flatcamGUI/PreferencesUI.py:4264 flatcamTools/ToolPaint.py:285
msgid "Selection"
msgstr "Selection"

#: flatcamGUI/PreferencesUI.py:4266 flatcamTools/ToolPaint.py:287
#: flatcamTools/ToolPaint.py:303
msgid ""
"How to select Polygons to be painted.\n"
"\n"
"- 'Area Selection' - left mouse click to start selection of the area to be "
"painted.\n"
"Keeping a modifier key pressed (CTRL or SHIFT) will allow to add multiple "
"areas.\n"
"- 'All Polygons' - the Paint will start after click.\n"
"- 'Reference Object' -  will do non copper clearing within the area\n"
"specified by another object."
msgstr ""
"How to select Polygons to be painted.\n"
"\n"
"- 'Area Selection' - left mouse click to start selection of the area to be "
"painted.\n"
"Keeping a modifier key pressed (CTRL or SHIFT) will allow to add multiple "
"areas.\n"
"- 'All Polygons' - the Paint will start after click.\n"
"- 'Reference Object' -  will do non copper clearing within the area\n"
"specified by another object."

#: flatcamGUI/PreferencesUI.py:4277
msgid "Ref."
msgstr "Ref."

#: flatcamGUI/PreferencesUI.py:4285
msgid "Paint Plotting"
msgstr "Paint Plotting"

#: flatcamGUI/PreferencesUI.py:4287
msgid ""
"- 'Normal' -  normal plotting, done at the end of the Paint job\n"
"- 'Progressive' - after each shape is generated it will be plotted."
msgstr ""
"- 'Normal' -  normal plotting, done at the end of the Paint job\n"
"- 'Progressive' - after each shape is generated it will be plotted."

#: flatcamGUI/PreferencesUI.py:4301
msgid "Film Tool Options"
msgstr "Film Tool Options"

#: flatcamGUI/PreferencesUI.py:4307
msgid ""
"Create a PCB film from a Gerber or Geometry\n"
"FlatCAM object.\n"
"The file is saved in SVG format."
msgstr ""
"Create a PCB film from a Gerber or Geometry\n"
"FlatCAM object.\n"
"The file is saved in SVG format."

#: flatcamGUI/PreferencesUI.py:4318
msgid "Film Type"
msgstr "Film Type"

#: flatcamGUI/PreferencesUI.py:4320 flatcamTools/ToolFilm.py:267
msgid ""
"Generate a Positive black film or a Negative film.\n"
"Positive means that it will print the features\n"
"with black on a white canvas.\n"
"Negative means that it will print the features\n"
"with white on a black canvas.\n"
"The Film format is SVG."
msgstr ""
"Generate a Positive black film or a Negative film.\n"
"Positive means that it will print the features\n"
"with black on a white canvas.\n"
"Negative means that it will print the features\n"
"with white on a black canvas.\n"
"The Film format is SVG."

#: flatcamGUI/PreferencesUI.py:4331
msgid "Film Color"
msgstr "Film Color"

#: flatcamGUI/PreferencesUI.py:4333
msgid "Set the film color when positive film is selected."
msgstr "Set the film color when positive film is selected."

#: flatcamGUI/PreferencesUI.py:4356 flatcamTools/ToolFilm.py:283
msgid "Border"
msgstr "Border"

#: flatcamGUI/PreferencesUI.py:4358 flatcamTools/ToolFilm.py:285
msgid ""
"Specify a border around the object.\n"
"Only for negative film.\n"
"It helps if we use as a Box Object the same \n"
"object as in Film Object. It will create a thick\n"
"black bar around the actual print allowing for a\n"
"better delimitation of the outline features which are of\n"
"white color like the rest and which may confound with the\n"
"surroundings if not for this border."
msgstr ""
"Specify a border around the object.\n"
"Only for negative film.\n"
"It helps if we use as a Box Object the same \n"
"object as in Film Object. It will create a thick\n"
"black bar around the actual print allowing for a\n"
"better delimitation of the outline features which are of\n"
"white color like the rest and which may confound with the\n"
"surroundings if not for this border."

#: flatcamGUI/PreferencesUI.py:4375 flatcamTools/ToolFilm.py:250
msgid "Scale Stroke"
msgstr "Scale Stroke"

#: flatcamGUI/PreferencesUI.py:4377 flatcamTools/ToolFilm.py:252
msgid ""
"Scale the line stroke thickness of each feature in the SVG file.\n"
"It means that the line that envelope each SVG feature will be thicker or "
"thinner,\n"
"therefore the fine features may be more affected by this parameter."
msgstr ""
"Scale the line stroke thickness of each feature in the SVG file.\n"
"It means that the line that envelope each SVG feature will be thicker or "
"thinner,\n"
"therefore the fine features may be more affected by this parameter."

#: flatcamGUI/PreferencesUI.py:4384 flatcamTools/ToolFilm.py:127
msgid "Film Adjustments"
msgstr "Film Adjustments"

#: flatcamGUI/PreferencesUI.py:4386 flatcamTools/ToolFilm.py:129
msgid ""
"Sometime the printers will distort the print shape, especially the Laser "
"types.\n"
"This section provide the tools to compensate for the print distortions."
msgstr ""
"Sometime the printers will distort the print shape, especially the Laser "
"types.\n"
"This section provide the tools to compensate for the print distortions."

#: flatcamGUI/PreferencesUI.py:4393 flatcamTools/ToolFilm.py:136
msgid "Scale Film geometry"
msgstr "Scale Film geometry"

#: flatcamGUI/PreferencesUI.py:4395 flatcamTools/ToolFilm.py:138
msgid ""
"A value greater than 1 will stretch the film\n"
"while a value less than 1 will jolt it."
msgstr ""
"A value greater than 1 will stretch the film\n"
"while a value less than 1 will jolt it."

#: flatcamGUI/PreferencesUI.py:4405 flatcamGUI/PreferencesUI.py:4824
#: flatcamTools/ToolFilm.py:148 flatcamTools/ToolTransform.py:145
msgid "X factor"
msgstr "X factor"

#: flatcamGUI/PreferencesUI.py:4414 flatcamGUI/PreferencesUI.py:4837
#: flatcamTools/ToolFilm.py:157 flatcamTools/ToolTransform.py:166
msgid "Y factor"
msgstr "Y factor"

#: flatcamGUI/PreferencesUI.py:4424 flatcamTools/ToolFilm.py:169
msgid "Skew Film geometry"
msgstr "Skew Film geometry"

#: flatcamGUI/PreferencesUI.py:4426 flatcamTools/ToolFilm.py:171
msgid ""
"Positive values will skew to the right\n"
"while negative values will skew to the left."
msgstr ""
"Positive values will skew to the right\n"
"while negative values will skew to the left."

#: flatcamGUI/PreferencesUI.py:4436 flatcamGUI/PreferencesUI.py:4793
#: flatcamTools/ToolFilm.py:181 flatcamTools/ToolTransform.py:95
msgid "X angle"
msgstr "X angle"

#: flatcamGUI/PreferencesUI.py:4445 flatcamGUI/PreferencesUI.py:4807
#: flatcamTools/ToolFilm.py:190 flatcamTools/ToolTransform.py:117
msgid "Y angle"
msgstr "Y angle"

#: flatcamGUI/PreferencesUI.py:4456 flatcamTools/ToolFilm.py:201
msgid ""
"The reference point to be used as origin for the skew.\n"
"It can be one of the four points of the geometry bounding box."
msgstr ""
"The reference point to be used as origin for the skew.\n"
"It can be one of the four points of the geometry bounding box."

#: flatcamGUI/PreferencesUI.py:4459 flatcamTools/ToolFilm.py:204
msgid "Bottom Left"
msgstr "Bottom Left"

#: flatcamGUI/PreferencesUI.py:4460 flatcamTools/ToolFilm.py:205
msgid "Top Left"
msgstr "Top Left"

#: flatcamGUI/PreferencesUI.py:4461 flatcamTools/ToolFilm.py:206
msgid "Bottom Right"
msgstr "Bottom Right"

#: flatcamGUI/PreferencesUI.py:4462 flatcamTools/ToolFilm.py:207
msgid "Top right"
msgstr "Top right"

#: flatcamGUI/PreferencesUI.py:4470 flatcamTools/ToolFilm.py:218
msgid "Mirror Film geometry"
msgstr "Mirror Film geometry"

#: flatcamGUI/PreferencesUI.py:4472 flatcamTools/ToolFilm.py:220
msgid "Mirror the film geometry on the selected axis or on both."
msgstr "Mirror the film geometry on the selected axis or on both."

#: flatcamGUI/PreferencesUI.py:4484 flatcamTools/ToolFilm.py:232
msgid "Both"
msgstr "Both"

#: flatcamGUI/PreferencesUI.py:4486 flatcamTools/ToolFilm.py:234
msgid "Mirror axis"
msgstr "Mirror axis"

#: flatcamGUI/PreferencesUI.py:4499
msgid "Panelize Tool Options"
msgstr "Panelize Tool Options"

#: flatcamGUI/PreferencesUI.py:4505
msgid ""
"Create an object that contains an array of (x, y) elements,\n"
"each element is a copy of the source object spaced\n"
"at a X distance, Y distance of each other."
msgstr ""
"Create an object that contains an array of (x, y) elements,\n"
"each element is a copy of the source object spaced\n"
"at a X distance, Y distance of each other."

#: flatcamGUI/PreferencesUI.py:4520 flatcamTools/ToolPanelize.py:149
msgid "Spacing cols"
msgstr "Spacing cols"

#: flatcamGUI/PreferencesUI.py:4522 flatcamTools/ToolPanelize.py:151
msgid ""
"Spacing between columns of the desired panel.\n"
"In current units."
msgstr ""
"Spacing between columns of the desired panel.\n"
"In current units."

#: flatcamGUI/PreferencesUI.py:4534 flatcamTools/ToolPanelize.py:161
msgid "Spacing rows"
msgstr "Spacing rows"

#: flatcamGUI/PreferencesUI.py:4536 flatcamTools/ToolPanelize.py:163
msgid ""
"Spacing between rows of the desired panel.\n"
"In current units."
msgstr ""
"Spacing between rows of the desired panel.\n"
"In current units."

#: flatcamGUI/PreferencesUI.py:4547 flatcamTools/ToolPanelize.py:172
msgid "Columns"
msgstr "Columns"

#: flatcamGUI/PreferencesUI.py:4549 flatcamTools/ToolPanelize.py:174
msgid "Number of columns of the desired panel"
msgstr "Number of columns of the desired panel"

#: flatcamGUI/PreferencesUI.py:4559 flatcamTools/ToolPanelize.py:182
msgid "Rows"
msgstr "Rows"

#: flatcamGUI/PreferencesUI.py:4561 flatcamTools/ToolPanelize.py:184
msgid "Number of rows of the desired panel"
msgstr "Number of rows of the desired panel"

#: flatcamGUI/PreferencesUI.py:4567 flatcamTools/ToolPanelize.py:190
msgid "Gerber"
msgstr "Gerber"

#: flatcamGUI/PreferencesUI.py:4568 flatcamTools/ToolPanelize.py:191
msgid "Geo"
msgstr "Geo"

#: flatcamGUI/PreferencesUI.py:4569 flatcamTools/ToolPanelize.py:192
msgid "Panel Type"
msgstr "Panel Type"

#: flatcamGUI/PreferencesUI.py:4571
msgid ""
"Choose the type of object for the panel object:\n"
"- Gerber\n"
"- Geometry"
msgstr ""
"Choose the type of object for the panel object:\n"
"- Gerber\n"
"- Geometry"

#: flatcamGUI/PreferencesUI.py:4580
msgid "Constrain within"
msgstr "Constrain within"

#: flatcamGUI/PreferencesUI.py:4582 flatcamTools/ToolPanelize.py:204
msgid ""
"Area define by DX and DY within to constrain the panel.\n"
"DX and DY values are in current units.\n"
"Regardless of how many columns and rows are desired,\n"
"the final panel will have as many columns and rows as\n"
"they fit completely within selected area."
msgstr ""
"Area define by DX and DY within to constrain the panel.\n"
"DX and DY values are in current units.\n"
"Regardless of how many columns and rows are desired,\n"
"the final panel will have as many columns and rows as\n"
"they fit completely within selected area."

#: flatcamGUI/PreferencesUI.py:4595 flatcamTools/ToolPanelize.py:216
msgid "Width (DX)"
msgstr "Width (DX)"

#: flatcamGUI/PreferencesUI.py:4597 flatcamTools/ToolPanelize.py:218
msgid ""
"The width (DX) within which the panel must fit.\n"
"In current units."
msgstr ""
"The width (DX) within which the panel must fit.\n"
"In current units."

#: flatcamGUI/PreferencesUI.py:4608 flatcamTools/ToolPanelize.py:227
msgid "Height (DY)"
msgstr "Height (DY)"

#: flatcamGUI/PreferencesUI.py:4610 flatcamTools/ToolPanelize.py:229
msgid ""
"The height (DY)within which the panel must fit.\n"
"In current units."
msgstr ""
"The height (DY)within which the panel must fit.\n"
"In current units."

#: flatcamGUI/PreferencesUI.py:4624
msgid "Calculators Tool Options"
msgstr "Calculators Tool Options"

#: flatcamGUI/PreferencesUI.py:4628 flatcamTools/ToolCalculators.py:24
msgid "V-Shape Tool Calculator"
msgstr "V-Shape Tool Calculator"

#: flatcamGUI/PreferencesUI.py:4630
msgid ""
"Calculate the tool diameter for a given V-shape tool,\n"
"having the tip diameter, tip angle and\n"
"depth-of-cut as parameters."
msgstr ""
"Calculate the tool diameter for a given V-shape tool,\n"
"having the tip diameter, tip angle and\n"
"depth-of-cut as parameters."

#: flatcamGUI/PreferencesUI.py:4645 flatcamTools/ToolCalculators.py:93
msgid "Tip Diameter"
msgstr "Tip Diameter"

#: flatcamGUI/PreferencesUI.py:4647 flatcamTools/ToolCalculators.py:99
msgid ""
"This is the tool tip diameter.\n"
"It is specified by manufacturer."
msgstr ""
"This is the tool tip diameter.\n"
"It is specified by manufacturer."

#: flatcamGUI/PreferencesUI.py:4659 flatcamTools/ToolCalculators.py:102
msgid "Tip Angle"
msgstr "Tip Angle"

#: flatcamGUI/PreferencesUI.py:4661
msgid ""
"This is the angle on the tip of the tool.\n"
"It is specified by manufacturer."
msgstr ""
"This is the angle on the tip of the tool.\n"
"It is specified by manufacturer."

#: flatcamGUI/PreferencesUI.py:4675
msgid ""
"This is depth to cut into material.\n"
"In the CNCJob object it is the CutZ parameter."
msgstr ""
"This is depth to cut into material.\n"
"In the CNCJob object it is the CutZ parameter."

#: flatcamGUI/PreferencesUI.py:4682 flatcamTools/ToolCalculators.py:26
msgid "ElectroPlating Calculator"
msgstr "ElectroPlating Calculator"

#: flatcamGUI/PreferencesUI.py:4684 flatcamTools/ToolCalculators.py:153
msgid ""
"This calculator is useful for those who plate the via/pad/drill holes,\n"
"using a method like grahite ink or calcium hypophosphite ink or palladium "
"chloride."
msgstr ""
"This calculator is useful for those who plate the via/pad/drill holes,\n"
"using a method like grahite ink or calcium hypophosphite ink or palladium "
"chloride."

#: flatcamGUI/PreferencesUI.py:4698 flatcamTools/ToolCalculators.py:162
msgid "Board Length"
msgstr "Board Length"

#: flatcamGUI/PreferencesUI.py:4700 flatcamTools/ToolCalculators.py:167
msgid "This is the board length. In centimeters."
msgstr "This is the board length. In centimeters."

#: flatcamGUI/PreferencesUI.py:4710 flatcamTools/ToolCalculators.py:169
msgid "Board Width"
msgstr "Board Width"

#: flatcamGUI/PreferencesUI.py:4712 flatcamTools/ToolCalculators.py:174
msgid "This is the board width.In centimeters."
msgstr "This is the board width.In centimeters."

#: flatcamGUI/PreferencesUI.py:4717 flatcamTools/ToolCalculators.py:176
msgid "Current Density"
msgstr "Current Density"

#: flatcamGUI/PreferencesUI.py:4723 flatcamTools/ToolCalculators.py:181
msgid ""
"Current density to pass through the board. \n"
"In Amps per Square Feet ASF."
msgstr ""
"Current density to pass through the board. \n"
"In Amps per Square Feet ASF."

#: flatcamGUI/PreferencesUI.py:4729 flatcamTools/ToolCalculators.py:184
msgid "Copper Growth"
msgstr "Copper Growth"

#: flatcamGUI/PreferencesUI.py:4735 flatcamTools/ToolCalculators.py:189
msgid ""
"How thick the copper growth is intended to be.\n"
"In microns."
msgstr ""
"How thick the copper growth is intended to be.\n"
"In microns."

#: flatcamGUI/PreferencesUI.py:4748
msgid "Transform Tool Options"
msgstr "Transform Tool Options"

#: flatcamGUI/PreferencesUI.py:4754
msgid ""
"Various transformations that can be applied\n"
"on a FlatCAM object."
msgstr ""
"Various transformations that can be applied\n"
"on a FlatCAM object."

#: flatcamGUI/PreferencesUI.py:4785
msgid "Skew"
msgstr "Skew"

#: flatcamGUI/PreferencesUI.py:4826 flatcamTools/ToolTransform.py:147
msgid "Factor for scaling on X axis."
msgstr "Factor for scaling on X axis."

#: flatcamGUI/PreferencesUI.py:4839 flatcamTools/ToolTransform.py:168
msgid "Factor for scaling on Y axis."
msgstr "Factor for scaling on Y axis."

#: flatcamGUI/PreferencesUI.py:4847 flatcamTools/ToolTransform.py:191
msgid ""
"Scale the selected object(s)\n"
"using the Scale_X factor for both axis."
msgstr ""
"Scale the selected object(s)\n"
"using the Scale_X factor for both axis."

#: flatcamGUI/PreferencesUI.py:4855 flatcamTools/ToolTransform.py:199
msgid ""
"Scale the selected object(s)\n"
"using the origin reference when checked,\n"
"and the center of the biggest bounding box\n"
"of the selected objects when unchecked."
msgstr ""
"Scale the selected object(s)\n"
"using the origin reference when checked,\n"
"and the center of the biggest bounding box\n"
"of the selected objects when unchecked."

#: flatcamGUI/PreferencesUI.py:4871 flatcamTools/ToolTransform.py:214
msgid "X val"
msgstr "X val"

#: flatcamGUI/PreferencesUI.py:4873 flatcamTools/ToolTransform.py:216
msgid "Distance to offset on X axis. In current units."
msgstr "Distance to offset on X axis. In current units."

#: flatcamGUI/PreferencesUI.py:4884 flatcamTools/ToolTransform.py:235
msgid "Y val"
msgstr "Y val"

#: flatcamGUI/PreferencesUI.py:4886 flatcamTools/ToolTransform.py:237
msgid "Distance to offset on Y axis. In current units."
msgstr "Distance to offset on Y axis. In current units."

#: flatcamGUI/PreferencesUI.py:4892 flatcamTools/ToolTransform.py:282
msgid "Mirror Reference"
msgstr "Mirror Reference"

#: flatcamGUI/PreferencesUI.py:4894 flatcamTools/ToolTransform.py:284
msgid ""
"Flip the selected object(s)\n"
"around the point in Point Entry Field.\n"
"\n"
"The point coordinates can be captured by\n"
"left click on canvas together with pressing\n"
"SHIFT key. \n"
"Then click Add button to insert coordinates.\n"
"Or enter the coords in format (x, y) in the\n"
"Point Entry field and click Flip on X(Y)"
msgstr ""
"Flip the selected object(s)\n"
"around the point in Point Entry Field.\n"
"\n"
"The point coordinates can be captured by\n"
"left click on canvas together with pressing\n"
"SHIFT key. \n"
"Then click Add button to insert coordinates.\n"
"Or enter the coords in format (x, y) in the\n"
"Point Entry field and click Flip on X(Y)"

#: flatcamGUI/PreferencesUI.py:4905
msgid "Mirror Reference point"
msgstr "Mirror Reference point"

#: flatcamGUI/PreferencesUI.py:4907
msgid ""
"Coordinates in format (x, y) used as reference for mirroring.\n"
"The 'x' in (x, y) will be used when using Flip on X and\n"
"the 'y' in (x, y) will be used when using Flip on Y and"
msgstr ""
"Coordinates in format (x, y) used as reference for mirroring.\n"
"The 'x' in (x, y) will be used when using Flip on X and\n"
"the 'y' in (x, y) will be used when using Flip on Y and"

#: flatcamGUI/PreferencesUI.py:4924
msgid "SolderPaste Tool Options"
msgstr "SolderPaste Tool Options"

#: flatcamGUI/PreferencesUI.py:4929
msgid ""
"A tool to create GCode for dispensing\n"
"solder paste onto a PCB."
msgstr ""
"A tool to create GCode for dispensing\n"
"solder paste onto a PCB."

#: flatcamGUI/PreferencesUI.py:4940
msgid "Diameters of nozzle tools, separated by ','"
msgstr "Diameters of nozzle tools, separated by ','"

#: flatcamGUI/PreferencesUI.py:4947
msgid "New Nozzle Dia"
msgstr "New Nozzle Dia"

#: flatcamGUI/PreferencesUI.py:4949 flatcamTools/ToolSolderPaste.py:102
msgid "Diameter for the new Nozzle tool to add in the Tool Table"
msgstr "Diameter for the new Nozzle tool to add in the Tool Table"

#: flatcamGUI/PreferencesUI.py:4957 flatcamTools/ToolSolderPaste.py:165
msgid "Z Dispense Start"
msgstr "Z Dispense Start"

#: flatcamGUI/PreferencesUI.py:4959 flatcamTools/ToolSolderPaste.py:167
msgid "The height (Z) when solder paste dispensing starts."
msgstr "The height (Z) when solder paste dispensing starts."

#: flatcamGUI/PreferencesUI.py:4966 flatcamTools/ToolSolderPaste.py:173
msgid "Z Dispense"
msgstr "Z Dispense"

#: flatcamGUI/PreferencesUI.py:4968 flatcamTools/ToolSolderPaste.py:175
msgid "The height (Z) when doing solder paste dispensing."
msgstr "The height (Z) when doing solder paste dispensing."

#: flatcamGUI/PreferencesUI.py:4975 flatcamTools/ToolSolderPaste.py:181
msgid "Z Dispense Stop"
msgstr "Z Dispense Stop"

#: flatcamGUI/PreferencesUI.py:4977 flatcamTools/ToolSolderPaste.py:183
msgid "The height (Z) when solder paste dispensing stops."
msgstr "The height (Z) when solder paste dispensing stops."

#: flatcamGUI/PreferencesUI.py:4984 flatcamTools/ToolSolderPaste.py:189
msgid "Z Travel"
msgstr "Z Travel"

#: flatcamGUI/PreferencesUI.py:4986 flatcamTools/ToolSolderPaste.py:191
msgid ""
"The height (Z) for travel between pads\n"
"(without dispensing solder paste)."
msgstr ""
"The height (Z) for travel between pads\n"
"(without dispensing solder paste)."

#: flatcamGUI/PreferencesUI.py:4994 flatcamTools/ToolSolderPaste.py:198
msgid "Z Toolchange"
msgstr "Z Toolchange"

#: flatcamGUI/PreferencesUI.py:4996 flatcamTools/ToolSolderPaste.py:200
msgid "The height (Z) for tool (nozzle) change."
msgstr "The height (Z) for tool (nozzle) change."

#: flatcamGUI/PreferencesUI.py:5005 flatcamTools/ToolSolderPaste.py:208
msgid ""
"The X,Y location for tool (nozzle) change.\n"
"The format is (x, y) where x and y are real numbers."
msgstr ""
"The X,Y location for tool (nozzle) change.\n"
"The format is (x, y) where x and y are real numbers."

#: flatcamGUI/PreferencesUI.py:5013 flatcamTools/ToolSolderPaste.py:215
msgid "Feedrate X-Y"
msgstr "Feedrate X-Y"

#: flatcamGUI/PreferencesUI.py:5015 flatcamTools/ToolSolderPaste.py:217
msgid "Feedrate (speed) while moving on the X-Y plane."
msgstr "Feedrate (speed) while moving on the X-Y plane."

#: flatcamGUI/PreferencesUI.py:5024 flatcamTools/ToolSolderPaste.py:225
msgid ""
"Feedrate (speed) while moving vertically\n"
"(on Z plane)."
msgstr ""
"Feedrate (speed) while moving vertically\n"
"(on Z plane)."

#: flatcamGUI/PreferencesUI.py:5032 flatcamTools/ToolSolderPaste.py:232
msgid "Feedrate Z Dispense"
msgstr "Feedrate Z Dispense"

#: flatcamGUI/PreferencesUI.py:5034
msgid ""
"Feedrate (speed) while moving up vertically\n"
"to Dispense position (on Z plane)."
msgstr ""
"Feedrate (speed) while moving up vertically\n"
"to Dispense position (on Z plane)."

#: flatcamGUI/PreferencesUI.py:5042 flatcamTools/ToolSolderPaste.py:241
msgid "Spindle Speed FWD"
msgstr "Spindle Speed FWD"

#: flatcamGUI/PreferencesUI.py:5044 flatcamTools/ToolSolderPaste.py:243
msgid ""
"The dispenser speed while pushing solder paste\n"
"through the dispenser nozzle."
msgstr ""
"The dispenser speed while pushing solder paste\n"
"through the dispenser nozzle."

#: flatcamGUI/PreferencesUI.py:5052 flatcamTools/ToolSolderPaste.py:250
msgid "Dwell FWD"
msgstr "Dwell FWD"

#: flatcamGUI/PreferencesUI.py:5054 flatcamTools/ToolSolderPaste.py:252
msgid "Pause after solder dispensing."
msgstr "Pause after solder dispensing."

#: flatcamGUI/PreferencesUI.py:5061 flatcamTools/ToolSolderPaste.py:258
msgid "Spindle Speed REV"
msgstr "Spindle Speed REV"

#: flatcamGUI/PreferencesUI.py:5063 flatcamTools/ToolSolderPaste.py:260
msgid ""
"The dispenser speed while retracting solder paste\n"
"through the dispenser nozzle."
msgstr ""
"The dispenser speed while retracting solder paste\n"
"through the dispenser nozzle."

#: flatcamGUI/PreferencesUI.py:5071 flatcamTools/ToolSolderPaste.py:267
msgid "Dwell REV"
msgstr "Dwell REV"

#: flatcamGUI/PreferencesUI.py:5073 flatcamTools/ToolSolderPaste.py:269
msgid ""
"Pause after solder paste dispenser retracted,\n"
"to allow pressure equilibrium."
msgstr ""
"Pause after solder paste dispenser retracted,\n"
"to allow pressure equilibrium."

#: flatcamGUI/PreferencesUI.py:5082 flatcamTools/ToolSolderPaste.py:277
msgid "Files that control the GCode generation."
msgstr "Files that control the GCode generation."

#: flatcamGUI/PreferencesUI.py:5097
msgid "Substractor Tool Options"
msgstr "Substractor Tool Options"

#: flatcamGUI/PreferencesUI.py:5102
msgid ""
"A tool to substract one Gerber or Geometry object\n"
"from another of the same type."
msgstr ""
"A tool to substract one Gerber or Geometry object\n"
"from another of the same type."

#: flatcamGUI/PreferencesUI.py:5107 flatcamTools/ToolSub.py:134
msgid "Close paths"
msgstr "Close paths"

#: flatcamGUI/PreferencesUI.py:5108 flatcamTools/ToolSub.py:135
msgid ""
"Checking this will close the paths cut by the Geometry substractor object."
msgstr ""
"Checking this will close the paths cut by the Geometry substractor object."

#: flatcamGUI/PreferencesUI.py:5119
msgid "Check Rules Tool Options"
msgstr "Check Rules Tool Options"

#: flatcamGUI/PreferencesUI.py:5124
msgid ""
"A tool to check if Gerber files fir within a set\n"
"of Manufacturing Rules."
msgstr ""
"A tool to check if Gerber files fir within a set\n"
"of Manufacturing Rules."

#: flatcamGUI/PreferencesUI.py:5134 flatcamTools/ToolRulesCheck.py:251
#: flatcamTools/ToolRulesCheck.py:895
msgid "Trace Size"
msgstr "Trace Size"

#: flatcamGUI/PreferencesUI.py:5136 flatcamTools/ToolRulesCheck.py:253
msgid "This checks if the minimum size for traces is met."
msgstr "This checks if the minimum size for traces is met."

#: flatcamGUI/PreferencesUI.py:5146 flatcamGUI/PreferencesUI.py:5166
#: flatcamGUI/PreferencesUI.py:5186 flatcamGUI/PreferencesUI.py:5206
#: flatcamGUI/PreferencesUI.py:5226 flatcamGUI/PreferencesUI.py:5246
#: flatcamGUI/PreferencesUI.py:5266 flatcamGUI/PreferencesUI.py:5286
#: flatcamGUI/PreferencesUI.py:5308 flatcamGUI/PreferencesUI.py:5328
#: flatcamTools/ToolRulesCheck.py:263 flatcamTools/ToolRulesCheck.py:285
#: flatcamTools/ToolRulesCheck.py:308 flatcamTools/ToolRulesCheck.py:331
#: flatcamTools/ToolRulesCheck.py:354 flatcamTools/ToolRulesCheck.py:377
#: flatcamTools/ToolRulesCheck.py:400 flatcamTools/ToolRulesCheck.py:423
#: flatcamTools/ToolRulesCheck.py:448 flatcamTools/ToolRulesCheck.py:471
msgid "Min value"
msgstr "Min value"

#: flatcamGUI/PreferencesUI.py:5148 flatcamTools/ToolRulesCheck.py:265
msgid "Minimum acceptable trace size."
msgstr "Minimum acceptable trace size."

#: flatcamGUI/PreferencesUI.py:5153 flatcamTools/ToolRulesCheck.py:272
#: flatcamTools/ToolRulesCheck.py:1123 flatcamTools/ToolRulesCheck.py:1153
msgid "Copper to Copper clearance"
msgstr "Copper to Copper clearance"

#: flatcamGUI/PreferencesUI.py:5155 flatcamTools/ToolRulesCheck.py:274
msgid ""
"This checks if the minimum clearance between copper\n"
"features is met."
msgstr ""
"This checks if the minimum clearance between copper\n"
"features is met."

#: flatcamGUI/PreferencesUI.py:5168 flatcamGUI/PreferencesUI.py:5188
#: flatcamGUI/PreferencesUI.py:5208 flatcamGUI/PreferencesUI.py:5228
#: flatcamGUI/PreferencesUI.py:5248 flatcamGUI/PreferencesUI.py:5268
#: flatcamGUI/PreferencesUI.py:5330 flatcamTools/ToolRulesCheck.py:287
#: flatcamTools/ToolRulesCheck.py:310 flatcamTools/ToolRulesCheck.py:333
#: flatcamTools/ToolRulesCheck.py:356 flatcamTools/ToolRulesCheck.py:379
#: flatcamTools/ToolRulesCheck.py:402 flatcamTools/ToolRulesCheck.py:450
msgid "Minimum acceptable clearance value."
msgstr "Minimum acceptable clearance value."

#: flatcamGUI/PreferencesUI.py:5173 flatcamTools/ToolRulesCheck.py:295
#: flatcamTools/ToolRulesCheck.py:1183 flatcamTools/ToolRulesCheck.py:1189
#: flatcamTools/ToolRulesCheck.py:1202 flatcamTools/ToolRulesCheck.py:1209
msgid "Copper to Outline clearance"
msgstr "Copper to Outline clearance"

#: flatcamGUI/PreferencesUI.py:5175 flatcamTools/ToolRulesCheck.py:297
msgid ""
"This checks if the minimum clearance between copper\n"
"features and the outline is met."
msgstr ""
"This checks if the minimum clearance between copper\n"
"features and the outline is met."

#: flatcamGUI/PreferencesUI.py:5193 flatcamTools/ToolRulesCheck.py:318
msgid "Silk to Silk Clearance"
msgstr "Silk to Silk Clearance"

#: flatcamGUI/PreferencesUI.py:5195 flatcamTools/ToolRulesCheck.py:320
msgid ""
"This checks if the minimum clearance between silkscreen\n"
"features and silkscreen features is met."
msgstr ""
"This checks if the minimum clearance between silkscreen\n"
"features and silkscreen features is met."

#: flatcamGUI/PreferencesUI.py:5213 flatcamTools/ToolRulesCheck.py:341
#: flatcamTools/ToolRulesCheck.py:1292 flatcamTools/ToolRulesCheck.py:1298
#: flatcamTools/ToolRulesCheck.py:1316
msgid "Silk to Solder Mask Clearance"
msgstr "Silk to Solder Mask Clearance"

#: flatcamGUI/PreferencesUI.py:5215 flatcamTools/ToolRulesCheck.py:343
msgid ""
"This checks if the minimum clearance between silkscreen\n"
"features and soldermask features is met."
msgstr ""
"This checks if the minimum clearance between silkscreen\n"
"features and soldermask features is met."

#: flatcamGUI/PreferencesUI.py:5233 flatcamTools/ToolRulesCheck.py:364
#: flatcamTools/ToolRulesCheck.py:1346 flatcamTools/ToolRulesCheck.py:1352
#: flatcamTools/ToolRulesCheck.py:1366 flatcamTools/ToolRulesCheck.py:1373
msgid "Silk to Outline Clearance"
msgstr "Silk to Outline Clearance"

#: flatcamGUI/PreferencesUI.py:5235 flatcamTools/ToolRulesCheck.py:366
msgid ""
"This checks if the minimum clearance between silk\n"
"features and the outline is met."
msgstr ""
"This checks if the minimum clearance between silk\n"
"features and the outline is met."

#: flatcamGUI/PreferencesUI.py:5253 flatcamTools/ToolRulesCheck.py:387
#: flatcamTools/ToolRulesCheck.py:1384 flatcamTools/ToolRulesCheck.py:1411
msgid "Minimum Solder Mask Sliver"
msgstr "Minimum Solder Mask Sliver"

#: flatcamGUI/PreferencesUI.py:5255 flatcamTools/ToolRulesCheck.py:389
msgid ""
"This checks if the minimum clearance between soldermask\n"
"features and soldermask features is met."
msgstr ""
"This checks if the minimum clearance between soldermask\n"
"features and soldermask features is met."

#: flatcamGUI/PreferencesUI.py:5273 flatcamTools/ToolRulesCheck.py:410
#: flatcamTools/ToolRulesCheck.py:1449 flatcamTools/ToolRulesCheck.py:1455
#: flatcamTools/ToolRulesCheck.py:1471 flatcamTools/ToolRulesCheck.py:1478
msgid "Minimum Annular Ring"
msgstr "Minimum Annular Ring"

#: flatcamGUI/PreferencesUI.py:5275 flatcamTools/ToolRulesCheck.py:412
msgid ""
"This checks if the minimum copper ring left by drilling\n"
"a hole into a pad is met."
msgstr ""
"This checks if the minimum copper ring left by drilling\n"
"a hole into a pad is met."

#: flatcamGUI/PreferencesUI.py:5288 flatcamTools/ToolRulesCheck.py:425
msgid "Minimum acceptable ring value."
msgstr "Minimum acceptable ring value."

#: flatcamGUI/PreferencesUI.py:5295 flatcamTools/ToolRulesCheck.py:435
#: flatcamTools/ToolRulesCheck.py:839
msgid "Hole to Hole Clearance"
msgstr "Hole to Hole Clearance"

#: flatcamGUI/PreferencesUI.py:5297 flatcamTools/ToolRulesCheck.py:437
msgid ""
"This checks if the minimum clearance between a drill hole\n"
"and another drill hole is met."
msgstr ""
"This checks if the minimum clearance between a drill hole\n"
"and another drill hole is met."

#: flatcamGUI/PreferencesUI.py:5310 flatcamTools/ToolRulesCheck.py:473
msgid "Minimum acceptable drill size."
msgstr "Minimum acceptable drill size."

#: flatcamGUI/PreferencesUI.py:5315 flatcamTools/ToolRulesCheck.py:458
#: flatcamTools/ToolRulesCheck.py:813
msgid "Hole Size"
msgstr "Hole Size"

#: flatcamGUI/PreferencesUI.py:5317 flatcamTools/ToolRulesCheck.py:460
msgid ""
"This checks if the drill holes\n"
"sizes are above the threshold."
msgstr ""
"This checks if the drill holes\n"
"sizes are above the threshold."

#: flatcamGUI/PreferencesUI.py:5342
msgid "Optimal Tool Options"
msgstr "Optimal Tool Options"

#: flatcamGUI/PreferencesUI.py:5348
msgid ""
"A tool to find the minimum distance between\n"
"every two Gerber geometric elements"
msgstr ""
"A tool to find the minimum distance between\n"
"every two Gerber geometric elements"

#: flatcamGUI/PreferencesUI.py:5363 flatcamTools/ToolOptimal.py:70
msgid "Precision"
msgstr "Precision"

#: flatcamGUI/PreferencesUI.py:5365
msgid "Number of decimals for the distances and coordinates in this tool."
msgstr "Number of decimals for the distances and coordinates in this tool."

#: flatcamGUI/PreferencesUI.py:5379
msgid "Excellon File associations"
msgstr "Excellon File associations"

#: flatcamGUI/PreferencesUI.py:5391 flatcamGUI/PreferencesUI.py:5463
#: flatcamGUI/PreferencesUI.py:5532 flatcamGUI/PreferencesUI.py:5601
msgid "Restore"
msgstr "Restore"

#: flatcamGUI/PreferencesUI.py:5392 flatcamGUI/PreferencesUI.py:5464
#: flatcamGUI/PreferencesUI.py:5533
msgid "Restore the extension list to the default state."
msgstr "Restore the extension list to the default state."

#: flatcamGUI/PreferencesUI.py:5393 flatcamGUI/PreferencesUI.py:5465
#: flatcamGUI/PreferencesUI.py:5534 flatcamGUI/PreferencesUI.py:5603
msgid "Delete All"
msgstr "Delete All"

#: flatcamGUI/PreferencesUI.py:5394 flatcamGUI/PreferencesUI.py:5466
#: flatcamGUI/PreferencesUI.py:5535
msgid "Delete all extensions from the list."
msgstr "Delete all extensions from the list."

#: flatcamGUI/PreferencesUI.py:5402 flatcamGUI/PreferencesUI.py:5474
#: flatcamGUI/PreferencesUI.py:5543
msgid "Extensions list"
msgstr "Extensions list"

#: flatcamGUI/PreferencesUI.py:5404 flatcamGUI/PreferencesUI.py:5476
#: flatcamGUI/PreferencesUI.py:5545
msgid ""
"List of file extensions to be\n"
"associated with FlatCAM."
msgstr ""
"List of file extensions to be\n"
"associated with FlatCAM."

#: flatcamGUI/PreferencesUI.py:5424 flatcamGUI/PreferencesUI.py:5496
#: flatcamGUI/PreferencesUI.py:5564 flatcamGUI/PreferencesUI.py:5635
msgid "Extension"
msgstr "Extension"

#: flatcamGUI/PreferencesUI.py:5425 flatcamGUI/PreferencesUI.py:5497
#: flatcamGUI/PreferencesUI.py:5565
msgid "A file extension to be added or deleted to the list."
msgstr "A file extension to be added or deleted to the list."

#: flatcamGUI/PreferencesUI.py:5433 flatcamGUI/PreferencesUI.py:5505
#: flatcamGUI/PreferencesUI.py:5573
msgid "Add Extension"
msgstr "Add Extension"

#: flatcamGUI/PreferencesUI.py:5434 flatcamGUI/PreferencesUI.py:5506
#: flatcamGUI/PreferencesUI.py:5574
msgid "Add a file extension to the list"
msgstr "Add a file extension to the list"

#: flatcamGUI/PreferencesUI.py:5435 flatcamGUI/PreferencesUI.py:5507
#: flatcamGUI/PreferencesUI.py:5575
msgid "Delete Extension"
msgstr "Delete Extension"

#: flatcamGUI/PreferencesUI.py:5436 flatcamGUI/PreferencesUI.py:5508
#: flatcamGUI/PreferencesUI.py:5576
msgid "Delete a file extension from the list"
msgstr "Delete a file extension from the list"

#: flatcamGUI/PreferencesUI.py:5443 flatcamGUI/PreferencesUI.py:5515
#: flatcamGUI/PreferencesUI.py:5583
msgid "Apply Association"
msgstr "Apply Association"

#: flatcamGUI/PreferencesUI.py:5444 flatcamGUI/PreferencesUI.py:5516
#: flatcamGUI/PreferencesUI.py:5584
msgid ""
"Apply the file associations between\n"
"FlatCAM and the files with above extensions.\n"
"They will be active after next logon.\n"
"This work only in Windows."
msgstr ""
"Apply the file associations between\n"
"FlatCAM and the files with above extensions.\n"
"They will be active after next logon.\n"
"This work only in Windows."

#: flatcamGUI/PreferencesUI.py:5461
msgid "GCode File associations"
msgstr "GCode File associations"

#: flatcamGUI/PreferencesUI.py:5530
msgid "Gerber File associations"
msgstr "Gerber File associations"

#: flatcamGUI/PreferencesUI.py:5599
msgid "Autocompleter Keywords"
msgstr "Autocompleter Keywords"

#: flatcamGUI/PreferencesUI.py:5602
msgid "Restore the autocompleter keywords list to the default state."
msgstr "Restore the autocompleter keywords list to the default state."

#: flatcamGUI/PreferencesUI.py:5604
msgid "Delete all autocompleter keywords from the list."
msgstr "Delete all autocompleter keywords from the list."

#: flatcamGUI/PreferencesUI.py:5612
msgid "Keywords list"
msgstr "Keywords list"

#: flatcamGUI/PreferencesUI.py:5614
msgid ""
"List of keywords used by\n"
"the autocompleter in FlatCAM.\n"
"The autocompleter is installed\n"
"in the Code Editor and for the Tcl Shell."
msgstr ""
"List of keywords used by\n"
"the autocompleter in FlatCAM.\n"
"The autocompleter is installed\n"
"in the Code Editor and for the Tcl Shell."

#: flatcamGUI/PreferencesUI.py:5636
msgid "A keyword to be added or deleted to the list."
msgstr "A keyword to be added or deleted to the list."

#: flatcamGUI/PreferencesUI.py:5644
msgid "Add keyword"
msgstr "Add keyword"

#: flatcamGUI/PreferencesUI.py:5645
msgid "Add a keyword to the list"
msgstr "Add a keyword to the list"

#: flatcamGUI/PreferencesUI.py:5646
msgid "Delete keyword"
msgstr "Delete keyword"

#: flatcamGUI/PreferencesUI.py:5647
msgid "Delete a keyword from the list"
msgstr "Delete a keyword from the list"

#: flatcamParsers/ParseExcellon.py:295
msgid "This is GCODE mark"
msgstr "This is GCODE mark"

#: flatcamParsers/ParseExcellon.py:411
msgid ""
"No tool diameter info's. See shell.\n"
"A tool change event: T"
msgstr ""
"No tool diameter info's. See shell.\n"
"A tool change event: T"

#: flatcamParsers/ParseExcellon.py:414
msgid ""
"was found but the Excellon file have no informations regarding the tool "
"diameters therefore the application will try to load it by using some 'fake' "
"diameters.\n"
"The user needs to edit the resulting Excellon object and change the "
"diameters to reflect the real diameters."
msgstr ""
"was found but the Excellon file have no informations regarding the tool "
"diameters therefore the application will try to load it by using some 'fake' "
"diameters.\n"
"The user needs to edit the resulting Excellon object and change the "
"diameters to reflect the real diameters."

#: flatcamParsers/ParseExcellon.py:869
#, python-brace-format
msgid ""
"{e_code} Excellon Parser error.\n"
"Parsing Failed. Line {l_nr}: {line}\n"
msgstr ""
"{e_code} Excellon Parser error.\n"
"Parsing Failed. Line {l_nr}: {line}\n"

#: flatcamParsers/ParseExcellon.py:952
msgid ""
"Excellon.create_geometry() -> a drill location was skipped due of not having "
"a tool associated.\n"
"Check the resulting GCode."
msgstr ""
"Excellon.create_geometry() -> a drill location was skipped due of not having "
"a tool associated.\n"
"Check the resulting GCode."

#: flatcamParsers/ParseFont.py:304
msgid "Font not supported, try another one."
msgstr "Font not supported, try another one."

#: flatcamParsers/ParseGerber.py:404
msgid "Gerber processing. Parsing"
msgstr "Gerber processing. Parsing"

#: flatcamParsers/ParseGerber.py:404
msgid "lines"
msgstr "lines"

#: flatcamParsers/ParseGerber.py:933 flatcamParsers/ParseGerber.py:1028
msgid "Coordinates missing, line ignored"
msgstr "Coordinates missing, line ignored"

#: flatcamParsers/ParseGerber.py:935 flatcamParsers/ParseGerber.py:1030
msgid "GERBER file might be CORRUPT. Check the file !!!"
msgstr "GERBER file might be CORRUPT. Check the file !!!"

#: flatcamParsers/ParseGerber.py:984
msgid ""
"Region does not have enough points. File will be processed but there are "
"parser errors. Line number"
msgstr ""
"Region does not have enough points. File will be processed but there are "
"parser errors. Line number"

#: flatcamParsers/ParseGerber.py:1375
msgid "Gerber processing. Joining polygons"
msgstr "Gerber processing. Joining polygons"

#: flatcamParsers/ParseGerber.py:1392
msgid "Gerber processing. Applying Gerber polarity."
msgstr "Gerber processing. Applying Gerber polarity."

#: flatcamParsers/ParseGerber.py:1434
msgid "Gerber Line"
msgstr "Gerber Line"

#: flatcamParsers/ParseGerber.py:1434
msgid "Gerber Line Content"
msgstr "Gerber Line Content"

#: flatcamParsers/ParseGerber.py:1436
msgid "Gerber Parser ERROR"
msgstr "Gerber Parser ERROR"

#: flatcamParsers/ParseGerber.py:1738
msgid "Gerber Scale done."
msgstr "Gerber Scale done."

#: flatcamParsers/ParseGerber.py:1828
msgid "Gerber Offset done."
msgstr "Gerber Offset done."

#: flatcamParsers/ParseGerber.py:1905
msgid "Gerber Mirror done."
msgstr "Gerber Mirror done."

#: flatcamParsers/ParseGerber.py:1977
msgid "Gerber Skew done."
msgstr "Gerber Skew done."

#: flatcamParsers/ParseGerber.py:2038
msgid "Gerber Rotate done."
msgstr "Gerber Rotate done."

#: flatcamTools/ToolCalculators.py:23
msgid "Calculators"
msgstr "Calculators"

#: flatcamTools/ToolCalculators.py:25
msgid "Units Calculator"
msgstr "Units Calculator"

#: flatcamTools/ToolCalculators.py:69
msgid "Here you enter the value to be converted from INCH to MM"
msgstr "Here you enter the value to be converted from INCH to MM"

#: flatcamTools/ToolCalculators.py:74
msgid "Here you enter the value to be converted from MM to INCH"
msgstr "Here you enter the value to be converted from MM to INCH"

#: flatcamTools/ToolCalculators.py:106
msgid ""
"This is the angle of the tip of the tool.\n"
"It is specified by manufacturer."
msgstr ""
"This is the angle of the tip of the tool.\n"
"It is specified by manufacturer."

#: flatcamTools/ToolCalculators.py:115
msgid ""
"This is the depth to cut into the material.\n"
"In the CNCJob is the CutZ parameter."
msgstr ""
"This is the depth to cut into the material.\n"
"In the CNCJob is the CutZ parameter."

#: flatcamTools/ToolCalculators.py:118
msgid "Tool Diameter"
msgstr "Tool Diameter"

#: flatcamTools/ToolCalculators.py:123
msgid ""
"This is the tool diameter to be entered into\n"
"FlatCAM Gerber section.\n"
"In the CNCJob section it is called >Tool dia<."
msgstr ""
"This is the tool diameter to be entered into\n"
"FlatCAM Gerber section.\n"
"In the CNCJob section it is called >Tool dia<."

#: flatcamTools/ToolCalculators.py:134 flatcamTools/ToolCalculators.py:220
msgid "Calculate"
msgstr "Calculate"

#: flatcamTools/ToolCalculators.py:137
msgid ""
"Calculate either the Cut Z or the effective tool diameter,\n"
"  depending on which is desired and which is known. "
msgstr ""
"Calculate either the Cut Z or the effective tool diameter,\n"
"  depending on which is desired and which is known. "

#: flatcamTools/ToolCalculators.py:194
msgid "Current Value"
msgstr "Current Value"

#: flatcamTools/ToolCalculators.py:199
msgid ""
"This is the current intensity value\n"
"to be set on the Power Supply. In Amps."
msgstr ""
"This is the current intensity value\n"
"to be set on the Power Supply. In Amps."

#: flatcamTools/ToolCalculators.py:203
msgid "Time"
msgstr "Time"

#: flatcamTools/ToolCalculators.py:208
msgid ""
"This is the calculated time required for the procedure.\n"
"In minutes."
msgstr ""
"This is the calculated time required for the procedure.\n"
"In minutes."

#: flatcamTools/ToolCalculators.py:223
msgid ""
"Calculate the current intensity value and the procedure time,\n"
"depending on the parameters above"
msgstr ""
"Calculate the current intensity value and the procedure time,\n"
"depending on the parameters above"

#: flatcamTools/ToolCalculators.py:270
msgid "Calc. Tool"
msgstr "Calc. Tool"

#: flatcamTools/ToolCutOut.py:25
msgid "Cutout PCB"
msgstr "Cutout PCB"

#: flatcamTools/ToolCutOut.py:63
msgid ""
"Specify the type of object to be cutout.\n"
"It can be of type: Gerber or Geometry.\n"
"What is selected here will dictate the kind\n"
"of objects that will populate the 'Object' combobox."
msgstr ""
"Specify the type of object to be cutout.\n"
"It can be of type: Gerber or Geometry.\n"
"What is selected here will dictate the kind\n"
"of objects that will populate the 'Object' combobox."

#: flatcamTools/ToolCutOut.py:79
msgid "Object to be cutout.                        "
msgstr "Object to be cutout.                        "

#: flatcamTools/ToolCutOut.py:112
msgid "Margin:"
msgstr "Margin:"

#: flatcamTools/ToolCutOut.py:124
msgid "Gap size:"
msgstr "Gap size:"

#: flatcamTools/ToolCutOut.py:151
msgid "A. Automatic Bridge Gaps"
msgstr "A. Automatic Bridge Gaps"

#: flatcamTools/ToolCutOut.py:153
msgid "This section handle creation of automatic bridge gaps."
msgstr "This section handle creation of automatic bridge gaps."

#: flatcamTools/ToolCutOut.py:164
msgid ""
"Number of gaps used for the Automatic cutout.\n"
"There can be maximum 8 bridges/gaps.\n"
"The choices are:\n"
"- None  - no gaps\n"
"- lr    - left + right\n"
"- tb    - top + bottom\n"
"- 4     - left + right +top + bottom\n"
"- 2lr   - 2*left + 2*right\n"
"- 2tb  - 2*top + 2*bottom\n"
"- 8     - 2*left + 2*right +2*top + 2*bottom"
msgstr ""
"Number of gaps used for the Automatic cutout.\n"
"There can be maximum 8 bridges/gaps.\n"
"The choices are:\n"
"- None  - no gaps\n"
"- lr    - left + right\n"
"- tb    - top + bottom\n"
"- 4     - left + right +top + bottom\n"
"- 2lr   - 2*left + 2*right\n"
"- 2tb  - 2*top + 2*bottom\n"
"- 8     - 2*left + 2*right +2*top + 2*bottom"

#: flatcamTools/ToolCutOut.py:188
msgid "FreeForm"
msgstr "FreeForm"

#: flatcamTools/ToolCutOut.py:190
msgid ""
"The cutout shape can be of ny shape.\n"
"Useful when the PCB has a non-rectangular shape."
msgstr ""
"The cutout shape can be of ny shape.\n"
"Useful when the PCB has a non-rectangular shape."

#: flatcamTools/ToolCutOut.py:199
msgid ""
"Cutout the selected object.\n"
"The cutout shape can be of any shape.\n"
"Useful when the PCB has a non-rectangular shape."
msgstr ""
"Cutout the selected object.\n"
"The cutout shape can be of any shape.\n"
"Useful when the PCB has a non-rectangular shape."

#: flatcamTools/ToolCutOut.py:208
msgid "Rectangular"
msgstr "Rectangular"

#: flatcamTools/ToolCutOut.py:210
msgid ""
"The resulting cutout shape is\n"
"always a rectangle shape and it will be\n"
"the bounding box of the Object."
msgstr ""
"The resulting cutout shape is\n"
"always a rectangle shape and it will be\n"
"the bounding box of the Object."

#: flatcamTools/ToolCutOut.py:219
msgid ""
"Cutout the selected object.\n"
"The resulting cutout shape is\n"
"always a rectangle shape and it will be\n"
"the bounding box of the Object."
msgstr ""
"Cutout the selected object.\n"
"The resulting cutout shape is\n"
"always a rectangle shape and it will be\n"
"the bounding box of the Object."

#: flatcamTools/ToolCutOut.py:227
msgid "B. Manual Bridge Gaps"
msgstr "B. Manual Bridge Gaps"

#: flatcamTools/ToolCutOut.py:229
msgid ""
"This section handle creation of manual bridge gaps.\n"
"This is done by mouse clicking on the perimeter of the\n"
"Geometry object that is used as a cutout object. "
msgstr ""
"This section handle creation of manual bridge gaps.\n"
"This is done by mouse clicking on the perimeter of the\n"
"Geometry object that is used as a cutout object. "

#: flatcamTools/ToolCutOut.py:245
msgid "Geo Obj"
msgstr "Geo Obj"

#: flatcamTools/ToolCutOut.py:247
msgid "Geometry object used to create the manual cutout."
msgstr "Geometry object used to create the manual cutout."

#: flatcamTools/ToolCutOut.py:258
msgid "Manual Geo"
msgstr "Manual Geo"

#: flatcamTools/ToolCutOut.py:260 flatcamTools/ToolCutOut.py:270
msgid ""
"If the object to be cutout is a Gerber\n"
"first create a Geometry that surrounds it,\n"
"to be used as the cutout, if one doesn't exist yet.\n"
"Select the source Gerber file in the top object combobox."
msgstr ""
"If the object to be cutout is a Gerber\n"
"first create a Geometry that surrounds it,\n"
"to be used as the cutout, if one doesn't exist yet.\n"
"Select the source Gerber file in the top object combobox."

#: flatcamTools/ToolCutOut.py:280
msgid "Manual Add Bridge Gaps"
msgstr "Manual Add Bridge Gaps"

#: flatcamTools/ToolCutOut.py:282
msgid ""
"Use the left mouse button (LMB) click\n"
"to create a bridge gap to separate the PCB from\n"
"the surrounding material."
msgstr ""
"Use the left mouse button (LMB) click\n"
"to create a bridge gap to separate the PCB from\n"
"the surrounding material."

#: flatcamTools/ToolCutOut.py:289
msgid "Generate Gap"
msgstr "Generate Gap"

#: flatcamTools/ToolCutOut.py:291
msgid ""
"Use the left mouse button (LMB) click\n"
"to create a bridge gap to separate the PCB from\n"
"the surrounding material.\n"
"The LMB click has to be done on the perimeter of\n"
"the Geometry object used as a cutout geometry."
msgstr ""
"Use the left mouse button (LMB) click\n"
"to create a bridge gap to separate the PCB from\n"
"the surrounding material.\n"
"The LMB click has to be done on the perimeter of\n"
"the Geometry object used as a cutout geometry."

#: flatcamTools/ToolCutOut.py:390 flatcamTools/ToolCutOut.py:561
#: flatcamTools/ToolNonCopperClear.py:1115
#: flatcamTools/ToolNonCopperClear.py:1156
#: flatcamTools/ToolNonCopperClear.py:1188 flatcamTools/ToolPaint.py:1064
#: flatcamTools/ToolPanelize.py:374 flatcamTools/ToolPanelize.py:391
#: flatcamTools/ToolSub.py:253 flatcamTools/ToolSub.py:268
#: flatcamTools/ToolSub.py:455 flatcamTools/ToolSub.py:470
#: tclCommands/TclCommandCopperClear.py:131
#: tclCommands/TclCommandCopperClear.py:208 tclCommands/TclCommandPaint.py:133
msgid "Could not retrieve object"
msgstr "Could not retrieve object"

#: flatcamTools/ToolCutOut.py:395
msgid ""
"There is no object selected for Cutout.\n"
"Select one and try again."
msgstr ""
"There is no object selected for Cutout.\n"
"Select one and try again."

#: flatcamTools/ToolCutOut.py:401 flatcamTools/ToolCutOut.py:570
#: flatcamTools/ToolCutOut.py:711 flatcamTools/ToolCutOut.py:793
msgid "Tool Diameter is zero value. Change it to a positive real number."
msgstr "Tool Diameter is zero value. Change it to a positive real number."

#: flatcamTools/ToolCutOut.py:415 flatcamTools/ToolCutOut.py:585
msgid "Number of gaps value is missing. Add it and retry."
msgstr "Number of gaps value is missing. Add it and retry."

#: flatcamTools/ToolCutOut.py:420 flatcamTools/ToolCutOut.py:589
msgid ""
"Gaps value can be only one of: 'None', 'lr', 'tb', '2lr', '2tb', 4 or 8. "
"Fill in a correct value and retry. "
msgstr ""
"Gaps value can be only one of: 'None', 'lr', 'tb', '2lr', '2tb', 4 or 8. "
"Fill in a correct value and retry. "

#: flatcamTools/ToolCutOut.py:425 flatcamTools/ToolCutOut.py:595
msgid ""
"Cutout operation cannot be done on a multi-geo Geometry.\n"
"Optionally, this Multi-geo Geometry can be converted to Single-geo "
"Geometry,\n"
"and after that perform Cutout."
msgstr ""
"Cutout operation cannot be done on a multi-geo Geometry.\n"
"Optionally, this Multi-geo Geometry can be converted to Single-geo "
"Geometry,\n"
"and after that perform Cutout."

#: flatcamTools/ToolCutOut.py:544 flatcamTools/ToolCutOut.py:700
msgid "Any form CutOut operation finished."
msgstr "Any form CutOut operation finished."

#: flatcamTools/ToolCutOut.py:565 flatcamTools/ToolNonCopperClear.py:1119
#: flatcamTools/ToolPaint.py:960 flatcamTools/ToolPanelize.py:381
#: tclCommands/TclCommandBbox.py:66 tclCommands/TclCommandNregions.py:65
msgid "Object not found"
msgstr "Object not found"

#: flatcamTools/ToolCutOut.py:705
msgid ""
"Click on the selected geometry object perimeter to create a bridge gap ..."
msgstr ""
"Click on the selected geometry object perimeter to create a bridge gap ..."

#: flatcamTools/ToolCutOut.py:722 flatcamTools/ToolCutOut.py:748
msgid "Could not retrieve Geometry object"
msgstr "Could not retrieve Geometry object"

#: flatcamTools/ToolCutOut.py:753
msgid "Geometry object for manual cutout not found"
msgstr "Geometry object for manual cutout not found"

#: flatcamTools/ToolCutOut.py:763
msgid "Added manual Bridge Gap."
msgstr "Added manual Bridge Gap."

#: flatcamTools/ToolCutOut.py:775
msgid "Could not retrieve Gerber object"
msgstr "Could not retrieve Gerber object"

#: flatcamTools/ToolCutOut.py:780
msgid ""
"There is no Gerber object selected for Cutout.\n"
"Select one and try again."
msgstr ""
"There is no Gerber object selected for Cutout.\n"
"Select one and try again."

#: flatcamTools/ToolCutOut.py:786
msgid ""
"The selected object has to be of Gerber type.\n"
"Select a Gerber file and try again."
msgstr ""
"The selected object has to be of Gerber type.\n"
"Select a Gerber file and try again."

#: flatcamTools/ToolCutOut.py:821
msgid "Geometry not supported for cutout"
msgstr "Geometry not supported for cutout"

#: flatcamTools/ToolCutOut.py:873
msgid "Making manual bridge gap..."
msgstr "Making manual bridge gap..."

#: flatcamTools/ToolDblSided.py:18
msgid "2-Sided PCB"
msgstr "2-Sided PCB"

#: flatcamTools/ToolDblSided.py:53 flatcamTools/ToolDblSided.py:77
#: flatcamTools/ToolDblSided.py:101
msgid "Mirror"
msgstr "Mirror"

#: flatcamTools/ToolDblSided.py:55 flatcamTools/ToolDblSided.py:79
#: flatcamTools/ToolDblSided.py:103
msgid ""
"Mirrors (flips) the specified object around \n"
"the specified axis. Does not create a new \n"
"object, but modifies it."
msgstr ""
"Mirrors (flips) the specified object around \n"
"the specified axis. Does not create a new \n"
"object, but modifies it."

#: flatcamTools/ToolDblSided.py:74
msgid "Excellon Object to be mirrored."
msgstr "Excellon Object to be mirrored."

#: flatcamTools/ToolDblSided.py:98
msgid "Geometry Obj to be mirrored."
msgstr "Geometry Obj to be mirrored."

#: flatcamTools/ToolDblSided.py:134
msgid "Axis Ref:"
msgstr "Axis Ref:"

#: flatcamTools/ToolDblSided.py:153
msgid "Point/Box Reference"
msgstr "Point/Box Reference"

#: flatcamTools/ToolDblSided.py:155
msgid ""
"If 'Point' is selected above it store the coordinates (x, y) through which\n"
"the mirroring axis passes.\n"
"If 'Box' is selected above, select here a FlatCAM object (Gerber, Exc or "
"Geo).\n"
"Through the center of this object pass the mirroring axis selected above."
msgstr ""
"If 'Point' is selected above it store the coordinates (x, y) through which\n"
"the mirroring axis passes.\n"
"If 'Box' is selected above, select here a FlatCAM object (Gerber, Exc or "
"Geo).\n"
"Through the center of this object pass the mirroring axis selected above."

#: flatcamTools/ToolDblSided.py:163
msgid ""
"Add the coordinates in format <b>(x, y)</b> through which the mirroring "
"axis \n"
" selected in 'MIRROR AXIS' pass.\n"
"The (x, y) coordinates are captured by pressing SHIFT key\n"
"and left mouse button click on canvas or you can enter the coords manually."
msgstr ""
"Add the coordinates in format <b>(x, y)</b> through which the mirroring "
"axis \n"
" selected in 'MIRROR AXIS' pass.\n"
"The (x, y) coordinates are captured by pressing SHIFT key\n"
"and left mouse button click on canvas or you can enter the coords manually."

#: flatcamTools/ToolDblSided.py:183 flatcamTools/ToolNonCopperClear.py:437
#: flatcamTools/ToolPaint.py:321
msgid "Gerber   Reference Box Object"
msgstr "Gerber   Reference Box Object"

#: flatcamTools/ToolDblSided.py:184 flatcamTools/ToolNonCopperClear.py:438
#: flatcamTools/ToolPaint.py:322
msgid "Excellon Reference Box Object"
msgstr "Excellon Reference Box Object"

#: flatcamTools/ToolDblSided.py:185 flatcamTools/ToolNonCopperClear.py:439
#: flatcamTools/ToolPaint.py:323
msgid "Geometry Reference Box Object"
msgstr "Geometry Reference Box Object"

#: flatcamTools/ToolDblSided.py:193
msgid "Alignment Drill Coordinates"
msgstr "Alignment Drill Coordinates"

#: flatcamTools/ToolDblSided.py:195
msgid ""
"Alignment holes (x1, y1), (x2, y2), ... on one side of the mirror axis. For "
"each set of (x, y) coordinates\n"
"entered here, a pair of drills will be created:\n"
"\n"
"- one drill at the coordinates from the field\n"
"- one drill in mirror position over the axis selected above in the 'Mirror "
"Axis'."
msgstr ""
"Alignment holes (x1, y1), (x2, y2), ... on one side of the mirror axis. For "
"each set of (x, y) coordinates\n"
"entered here, a pair of drills will be created:\n"
"\n"
"- one drill at the coordinates from the field\n"
"- one drill in mirror position over the axis selected above in the 'Mirror "
"Axis'."

#: flatcamTools/ToolDblSided.py:210
msgid ""
"Add alignment drill holes coords in the format: (x1, y1), (x2, y2), ... \n"
"on one side of the mirror axis.\n"
"\n"
"The coordinates set can be obtained:\n"
"- press SHIFT key and left mouse clicking on canvas. Then click Add.\n"
"- press SHIFT key and left mouse clicking on canvas. Then CTRL+V in the "
"field.\n"
"- press SHIFT key and left mouse clicking on canvas. Then RMB click in the "
"field and click Paste.\n"
"- by entering the coords manually in the format: (x1, y1), (x2, y2), ..."
msgstr ""
"Add alignment drill holes coords in the format: (x1, y1), (x2, y2), ... \n"
"on one side of the mirror axis.\n"
"\n"
"The coordinates set can be obtained:\n"
"- press SHIFT key and left mouse clicking on canvas. Then click Add.\n"
"- press SHIFT key and left mouse clicking on canvas. Then CTRL+V in the "
"field.\n"
"- press SHIFT key and left mouse clicking on canvas. Then RMB click in the "
"field and click Paste.\n"
"- by entering the coords manually in the format: (x1, y1), (x2, y2), ..."

#: flatcamTools/ToolDblSided.py:229
msgid "Alignment Drill Diameter"
msgstr "Alignment Drill Diameter"

#: flatcamTools/ToolDblSided.py:252
msgid "Create Excellon Object"
msgstr "Create Excellon Object"

#: flatcamTools/ToolDblSided.py:254
msgid ""
"Creates an Excellon Object containing the\n"
"specified alignment holes and their mirror\n"
"images."
msgstr ""
"Creates an Excellon Object containing the\n"
"specified alignment holes and their mirror\n"
"images."

#: flatcamTools/ToolDblSided.py:260
msgid "Reset"
msgstr "Reset"

#: flatcamTools/ToolDblSided.py:262
msgid "Resets all the fields."
msgstr "Resets all the fields."

#: flatcamTools/ToolDblSided.py:312
msgid "2-Sided Tool"
msgstr "2-Sided Tool"

#: flatcamTools/ToolDblSided.py:337
msgid ""
"'Point' reference is selected and 'Point' coordinates are missing. Add them "
"and retry."
msgstr ""
"'Point' reference is selected and 'Point' coordinates are missing. Add them "
"and retry."

#: flatcamTools/ToolDblSided.py:356
msgid "There is no Box reference object loaded. Load one and retry."
msgstr "There is no Box reference object loaded. Load one and retry."

#: flatcamTools/ToolDblSided.py:379
msgid "No value or wrong format in Drill Dia entry. Add it and retry."
msgstr "No value or wrong format in Drill Dia entry. Add it and retry."

#: flatcamTools/ToolDblSided.py:386
msgid "There are no Alignment Drill Coordinates to use. Add them and retry."
msgstr "There are no Alignment Drill Coordinates to use. Add them and retry."

#: flatcamTools/ToolDblSided.py:409
msgid "Excellon object with alignment drills created..."
msgstr "Excellon object with alignment drills created..."

#: flatcamTools/ToolDblSided.py:418 flatcamTools/ToolOptimal.py:302
msgid "There is no Gerber object loaded ..."
msgstr "There is no Gerber object loaded ..."

#: flatcamTools/ToolDblSided.py:422 flatcamTools/ToolDblSided.py:465
#: flatcamTools/ToolDblSided.py:509
msgid "Only Gerber, Excellon and Geometry objects can be mirrored."
msgstr "Only Gerber, Excellon and Geometry objects can be mirrored."

#: flatcamTools/ToolDblSided.py:432
msgid ""
"'Point' coordinates missing. Using Origin (0, 0) as mirroring reference."
msgstr ""
"'Point' coordinates missing. Using Origin (0, 0) as mirroring reference."

#: flatcamTools/ToolDblSided.py:442 flatcamTools/ToolDblSided.py:486
#: flatcamTools/ToolDblSided.py:523
msgid "There is no Box object loaded ..."
msgstr "There is no Box object loaded ..."

#: flatcamTools/ToolDblSided.py:452 flatcamTools/ToolDblSided.py:496
#: flatcamTools/ToolDblSided.py:533
msgid "was mirrored"
msgstr "was mirrored"

#: flatcamTools/ToolDblSided.py:461
msgid "There is no Excellon object loaded ..."
msgstr "There is no Excellon object loaded ..."

#: flatcamTools/ToolDblSided.py:476
msgid ""
"There are no Point coordinates in the Point field. Add coords and try "
"again ..."
msgstr ""
"There are no Point coordinates in the Point field. Add coords and try "
"again ..."

#: flatcamTools/ToolDblSided.py:505
msgid "There is no Geometry object loaded ..."
msgstr "There is no Geometry object loaded ..."

#: flatcamTools/ToolDistance.py:43 flatcamTools/ToolDistanceMin.py:45
msgid "Those are the units in which the distance is measured."
msgstr "Those are the units in which the distance is measured."

#: flatcamTools/ToolDistance.py:44 flatcamTools/ToolDistanceMin.py:46
msgid "METRIC (mm)"
msgstr "METRIC (mm)"

#: flatcamTools/ToolDistance.py:44 flatcamTools/ToolDistanceMin.py:46
msgid "INCH (in)"
msgstr "INCH (in)"

#: flatcamTools/ToolDistance.py:47
msgid "Start Coords"
msgstr "Start Coords"

#: flatcamTools/ToolDistance.py:48 flatcamTools/ToolDistance.py:68
msgid "This is measuring Start point coordinates."
msgstr "This is measuring Start point coordinates."

#: flatcamTools/ToolDistance.py:50
msgid "Stop Coords"
msgstr "Stop Coords"

#: flatcamTools/ToolDistance.py:51 flatcamTools/ToolDistance.py:73
msgid "This is the measuring Stop point coordinates."
msgstr "This is the measuring Stop point coordinates."

#: flatcamTools/ToolDistance.py:53 flatcamTools/ToolDistanceMin.py:57
msgid "Dx"
msgstr "Dx"

#: flatcamTools/ToolDistance.py:54 flatcamTools/ToolDistance.py:78
#: flatcamTools/ToolDistanceMin.py:58 flatcamTools/ToolDistanceMin.py:87
msgid "This is the distance measured over the X axis."
msgstr "This is the distance measured over the X axis."

#: flatcamTools/ToolDistance.py:56 flatcamTools/ToolDistanceMin.py:60
msgid "Dy"
msgstr "Dy"

#: flatcamTools/ToolDistance.py:57 flatcamTools/ToolDistance.py:83
#: flatcamTools/ToolDistanceMin.py:61 flatcamTools/ToolDistanceMin.py:92
msgid "This is the distance measured over the Y axis."
msgstr "This is the distance measured over the Y axis."

#: flatcamTools/ToolDistance.py:60 flatcamTools/ToolDistance.py:88
#: flatcamTools/ToolDistanceMin.py:64 flatcamTools/ToolDistanceMin.py:97
msgid "This is orientation angle of the measuring line."
msgstr "This is orientation angle of the measuring line."

#: flatcamTools/ToolDistance.py:62 flatcamTools/ToolDistanceMin.py:66
msgid "DISTANCE"
msgstr "DISTANCE"

#: flatcamTools/ToolDistance.py:63 flatcamTools/ToolDistance.py:93
msgid "This is the point to point Euclidian distance."
msgstr "This is the point to point Euclidian distance."

#: flatcamTools/ToolDistance.py:95 flatcamTools/ToolDistanceMin.py:109
msgid "Measure"
msgstr "Measure"

#: flatcamTools/ToolDistance.py:201
msgid "MEASURING: Click on the Start point ..."
msgstr "MEASURING: Click on the Start point ..."

#: flatcamTools/ToolDistance.py:334
msgid "MEASURING: Click on the Destination point ..."
msgstr "MEASURING: Click on the Destination point ..."

#: flatcamTools/ToolDistance.py:341 flatcamTools/ToolDistanceMin.py:277
#, python-brace-format
msgid "MEASURING: Result D(x) = {d_x} | D(y) = {d_y} | Distance = {d_z}"
msgstr "MEASURING: Result D(x) = {d_x} | D(y) = {d_y} | Distance = {d_z}"

#: flatcamTools/ToolDistanceMin.py:27 flatcamTools/ToolDistanceMin.py:148
msgid "Minimum Distance Tool"
msgstr "Minimum Distance Tool"

#: flatcamTools/ToolDistanceMin.py:49
msgid "First object point"
msgstr "First object point"

#: flatcamTools/ToolDistanceMin.py:50 flatcamTools/ToolDistanceMin.py:75
msgid ""
"This is first object point coordinates.\n"
"This is the start point for measuring distance."
msgstr ""
"This is first object point coordinates.\n"
"This is the start point for measuring distance."

#: flatcamTools/ToolDistanceMin.py:53
msgid "Second object point"
msgstr "Second object point"

#: flatcamTools/ToolDistanceMin.py:54 flatcamTools/ToolDistanceMin.py:81
msgid ""
"This is second object point coordinates.\n"
"This is the end point for measuring distance."
msgstr ""
"This is second object point coordinates.\n"
"This is the end point for measuring distance."

#: flatcamTools/ToolDistanceMin.py:67 flatcamTools/ToolDistanceMin.py:102
msgid "This is the point to point Euclidean distance."
msgstr "This is the point to point Euclidean distance."

#: flatcamTools/ToolDistanceMin.py:69
msgid "Half Point"
msgstr "Half Point"

#: flatcamTools/ToolDistanceMin.py:70 flatcamTools/ToolDistanceMin.py:107
msgid "This is the middle point of the point to point Euclidean distance."
msgstr "This is the middle point of the point to point Euclidean distance."

#: flatcamTools/ToolDistanceMin.py:112
msgid "Jump to Half Point"
msgstr "Jump to Half Point"

#: flatcamTools/ToolDistanceMin.py:159
msgid ""
"Select two objects and no more, to measure the distance between them ..."
msgstr ""
"Select two objects and no more, to measure the distance between them ..."

#: flatcamTools/ToolDistanceMin.py:200 flatcamTools/ToolDistanceMin.py:210
#: flatcamTools/ToolDistanceMin.py:219 flatcamTools/ToolDistanceMin.py:240
msgid "Select two objects and no more. Currently the selection has objects: "
msgstr "Select two objects and no more. Currently the selection has objects: "

#: flatcamTools/ToolDistanceMin.py:284
msgid "Objects intersects or touch at"
msgstr "Objects intersects or touch at"

#: flatcamTools/ToolDistanceMin.py:290
msgid "Jumped to the half point between the two selected objects"
msgstr "Jumped to the half point between the two selected objects"

#: flatcamTools/ToolFilm.py:28
msgid "Film PCB"
msgstr "Film PCB"

#: flatcamTools/ToolFilm.py:64 flatcamTools/ToolImage.py:52
#: flatcamTools/ToolPanelize.py:55 flatcamTools/ToolProperties.py:142
msgid "Object Type"
msgstr "Object Type"

#: flatcamTools/ToolFilm.py:66
msgid ""
"Specify the type of object for which to create the film.\n"
"The object can be of type: Gerber or Geometry.\n"
"The selection here decide the type of objects that will be\n"
"in the Film Object combobox."
msgstr ""
"Specify the type of object for which to create the film.\n"
"The object can be of type: Gerber or Geometry.\n"
"The selection here decide the type of objects that will be\n"
"in the Film Object combobox."

#: flatcamTools/ToolFilm.py:80
msgid "Film Object"
msgstr "Film Object"

#: flatcamTools/ToolFilm.py:82
msgid "Object for which to create the film."
msgstr "Object for which to create the film."

#: flatcamTools/ToolFilm.py:99
msgid "Box Type:"
msgstr "Box Type:"

#: flatcamTools/ToolFilm.py:101
msgid ""
"Specify the type of object to be used as an container for\n"
"film creation. It can be: Gerber or Geometry type.The selection here decide "
"the type of objects that will be\n"
"in the Box Object combobox."
msgstr ""
"Specify the type of object to be used as an container for\n"
"film creation. It can be: Gerber or Geometry type.The selection here decide "
"the type of objects that will be\n"
"in the Box Object combobox."

#: flatcamTools/ToolFilm.py:115 flatcamTools/ToolPanelize.py:125
msgid "Box Object"
msgstr "Box Object"

#: flatcamTools/ToolFilm.py:117
msgid ""
"The actual object that is used a container for the\n"
" selected object for which we create the film.\n"
"Usually it is the PCB outline but it can be also the\n"
"same object for which the film is created."
msgstr ""
"The actual object that is used a container for the\n"
" selected object for which we create the film.\n"
"Usually it is the PCB outline but it can be also the\n"
"same object for which the film is created."

#: flatcamTools/ToolFilm.py:262
msgid "Positive"
msgstr "Positive"

#: flatcamTools/ToolFilm.py:263
msgid "Negative"
msgstr "Negative"

#: flatcamTools/ToolFilm.py:265
msgid "Film Type:"
msgstr "Film Type:"

#: flatcamTools/ToolFilm.py:301
msgid "Punch drill holes"
msgstr "Punch drill holes"

#: flatcamTools/ToolFilm.py:302
msgid ""
"When checked the generated film will have holes in pads when\n"
"the generated film is positive. This is done to help drilling,\n"
"when done manually."
msgstr ""
"When checked the generated film will have holes in pads when\n"
"the generated film is positive. This is done to help drilling,\n"
"when done manually."

#: flatcamTools/ToolFilm.py:320
msgid "Source"
msgstr "Source"

#: flatcamTools/ToolFilm.py:322
msgid ""
"The punch hole source can be:\n"
"- Excellon -> an Excellon holes center will serve as reference.\n"
"- Pad Center -> will try to use the pads center as reference."
msgstr ""
"The punch hole source can be:\n"
"- Excellon -> an Excellon holes center will serve as reference.\n"
"- Pad Center -> will try to use the pads center as reference."

#: flatcamTools/ToolFilm.py:327
msgid "Pad center"
msgstr "Pad center"

#: flatcamTools/ToolFilm.py:332
msgid "Excellon Obj"
msgstr "Excellon Obj"

#: flatcamTools/ToolFilm.py:334
msgid ""
"Remove the geometry of Excellon from the Film to create tge holes in pads."
msgstr ""
"Remove the geometry of Excellon from the Film to create tge holes in pads."

#: flatcamTools/ToolFilm.py:346
msgid "Punch Size"
msgstr "Punch Size"

#: flatcamTools/ToolFilm.py:347
msgid "The value here will control how big is the punch hole in the pads."
msgstr "The value here will control how big is the punch hole in the pads."

#: flatcamTools/ToolFilm.py:363
msgid "Save Film"
msgstr "Save Film"

#: flatcamTools/ToolFilm.py:365
msgid ""
"Create a Film for the selected object, within\n"
"the specified box. Does not create a new \n"
" FlatCAM object, but directly save it in SVG format\n"
"which can be opened with Inkscape."
msgstr ""
"Create a Film for the selected object, within\n"
"the specified box. Does not create a new \n"
" FlatCAM object, but directly save it in SVG format\n"
"which can be opened with Inkscape."

#: flatcamTools/ToolFilm.py:477
msgid ""
"Using the Pad center does not work on Geometry objects. Only a Gerber object "
"has pads."
msgstr ""
"Using the Pad center does not work on Geometry objects. Only a Gerber object "
"has pads."

#: flatcamTools/ToolFilm.py:487
msgid "No FlatCAM object selected. Load an object for Film and retry."
msgstr "No FlatCAM object selected. Load an object for Film and retry."

#: flatcamTools/ToolFilm.py:494
msgid "No FlatCAM object selected. Load an object for Box and retry."
msgstr "No FlatCAM object selected. Load an object for Box and retry."

#: flatcamTools/ToolFilm.py:505
msgid "Generating Film ..."
msgstr "Generating Film ..."

#: flatcamTools/ToolFilm.py:543 flatcamTools/ToolFilm.py:547
msgid "Export SVG positive"
msgstr "Export SVG positive"

#: flatcamTools/ToolFilm.py:552
msgid "Export SVG positive cancelled."
msgstr "Export SVG positive cancelled."

#: flatcamTools/ToolFilm.py:574
msgid ""
"No Excellon object selected. Load an object for punching reference and retry."
msgstr ""
"No Excellon object selected. Load an object for punching reference and retry."

#: flatcamTools/ToolFilm.py:598
msgid ""
" Could not generate punched hole film because the punch hole sizeis bigger "
"than some of the apertures in the Gerber object."
msgstr ""
" Could not generate punched hole film because the punch hole sizeis bigger "
"than some of the apertures in the Gerber object."

#: flatcamTools/ToolFilm.py:610
msgid ""
"Could not generate punched hole film because the punch hole sizeis bigger "
"than some of the apertures in the Gerber object."
msgstr ""
"Could not generate punched hole film because the punch hole sizeis bigger "
"than some of the apertures in the Gerber object."

#: flatcamTools/ToolFilm.py:628
msgid ""
"Could not generate punched hole film because the newly created object "
"geometry is the same as the one in the source object geometry..."
msgstr ""
"Could not generate punched hole film because the newly created object "
"geometry is the same as the one in the source object geometry..."

#: flatcamTools/ToolFilm.py:673 flatcamTools/ToolFilm.py:677
msgid "Export SVG negative"
msgstr "Export SVG negative"

#: flatcamTools/ToolFilm.py:682
msgid "Export SVG negative cancelled."
msgstr "Export SVG negative cancelled."

#: flatcamTools/ToolImage.py:24
msgid "Image as Object"
msgstr "Image as Object"

#: flatcamTools/ToolImage.py:30
msgid "Image to PCB"
msgstr "Image to PCB"

#: flatcamTools/ToolImage.py:54
msgid ""
"Specify the type of object to create from the image.\n"
"It can be of type: Gerber or Geometry."
msgstr ""
"Specify the type of object to create from the image.\n"
"It can be of type: Gerber or Geometry."

#: flatcamTools/ToolImage.py:62
msgid "DPI value"
msgstr "DPI value"

#: flatcamTools/ToolImage.py:63
msgid "Specify a DPI value for the image."
msgstr "Specify a DPI value for the image."

#: flatcamTools/ToolImage.py:69
msgid "Level of detail"
msgstr "Level of detail"

#: flatcamTools/ToolImage.py:78
msgid "Image type"
msgstr "Image type"

#: flatcamTools/ToolImage.py:80
msgid ""
"Choose a method for the image interpretation.\n"
"B/W means a black & white image. Color means a colored image."
msgstr ""
"Choose a method for the image interpretation.\n"
"B/W means a black & white image. Color means a colored image."

#: flatcamTools/ToolImage.py:89 flatcamTools/ToolImage.py:104
#: flatcamTools/ToolImage.py:117 flatcamTools/ToolImage.py:130
msgid "Mask value"
msgstr "Mask value"

#: flatcamTools/ToolImage.py:91
msgid ""
"Mask for monochrome image.\n"
"Takes values between [0 ... 255].\n"
"Decides the level of details to include\n"
"in the resulting geometry.\n"
"0 means no detail and 255 means everything \n"
"(which is totally black)."
msgstr ""
"Mask for monochrome image.\n"
"Takes values between [0 ... 255].\n"
"Decides the level of details to include\n"
"in the resulting geometry.\n"
"0 means no detail and 255 means everything \n"
"(which is totally black)."

#: flatcamTools/ToolImage.py:106
msgid ""
"Mask for RED color.\n"
"Takes values between [0 ... 255].\n"
"Decides the level of details to include\n"
"in the resulting geometry."
msgstr ""
"Mask for RED color.\n"
"Takes values between [0 ... 255].\n"
"Decides the level of details to include\n"
"in the resulting geometry."

#: flatcamTools/ToolImage.py:119
msgid ""
"Mask for GREEN color.\n"
"Takes values between [0 ... 255].\n"
"Decides the level of details to include\n"
"in the resulting geometry."
msgstr ""
"Mask for GREEN color.\n"
"Takes values between [0 ... 255].\n"
"Decides the level of details to include\n"
"in the resulting geometry."

#: flatcamTools/ToolImage.py:132
msgid ""
"Mask for BLUE color.\n"
"Takes values between [0 ... 255].\n"
"Decides the level of details to include\n"
"in the resulting geometry."
msgstr ""
"Mask for BLUE color.\n"
"Takes values between [0 ... 255].\n"
"Decides the level of details to include\n"
"in the resulting geometry."

#: flatcamTools/ToolImage.py:140
msgid "Import image"
msgstr "Import image"

#: flatcamTools/ToolImage.py:142
msgid "Open a image of raster type and then import it in FlatCAM."
msgstr "Open a image of raster type and then import it in FlatCAM."

#: flatcamTools/ToolImage.py:176
msgid "Image Tool"
msgstr "Image Tool"

#: flatcamTools/ToolImage.py:206 flatcamTools/ToolImage.py:209
msgid "Import IMAGE"
msgstr "Import IMAGE"

#: flatcamTools/ToolMove.py:98
msgid "MOVE: Click on the Start point ..."
msgstr "MOVE: Click on the Start point ..."

#: flatcamTools/ToolMove.py:109
msgid "MOVE action cancelled. No object(s) to move."
msgstr "MOVE action cancelled. No object(s) to move."

#: flatcamTools/ToolMove.py:136
msgid "MOVE: Click on the Destination point ..."
msgstr "MOVE: Click on the Destination point ..."

#: flatcamTools/ToolMove.py:159
msgid "Moving..."
msgstr "Moving..."

#: flatcamTools/ToolMove.py:162
msgid "No object(s) selected."
msgstr "No object(s) selected."

#: flatcamTools/ToolMove.py:209
msgid "Error when mouse left click."
msgstr "Error when mouse left click."

#: flatcamTools/ToolMove.py:257
msgid "Move action cancelled."
msgstr "Move action cancelled."

#: flatcamTools/ToolNonCopperClear.py:25
msgid "Non-Copper Clearing"
msgstr "Non-Copper Clearing"

#: flatcamTools/ToolNonCopperClear.py:71
msgid ""
"Specify the type of object to be cleared of excess copper.\n"
"It can be of type: Gerber or Geometry.\n"
"What is selected here will dictate the kind\n"
"of objects that will populate the 'Object' combobox."
msgstr ""
"Specify the type of object to be cleared of excess copper.\n"
"It can be of type: Gerber or Geometry.\n"
"What is selected here will dictate the kind\n"
"of objects that will populate the 'Object' combobox."

#: flatcamTools/ToolNonCopperClear.py:88
msgid "Object to be cleared of excess copper."
msgstr "Object to be cleared of excess copper."

#: flatcamTools/ToolNonCopperClear.py:98
msgid ""
"Tools pool from which the algorithm\n"
"will pick the ones used for copper clearing."
msgstr ""
"Tools pool from which the algorithm\n"
"will pick the ones used for copper clearing."

#: flatcamTools/ToolNonCopperClear.py:107
msgid "Operation"
msgstr "Operation"

#: flatcamTools/ToolNonCopperClear.py:113
msgid ""
"This is the Tool Number.\n"
"Non copper clearing will start with the tool with the biggest \n"
"diameter, continuing until there are no more tools.\n"
"Only tools that create NCC clearing geometry will still be present\n"
"in the resulting geometry. This is because with some tools\n"
"this function will not be able to create painting geometry."
msgstr ""
"This is the Tool Number.\n"
"Non copper clearing will start with the tool with the biggest \n"
"diameter, continuing until there are no more tools.\n"
"Only tools that create NCC clearing geometry will still be present\n"
"in the resulting geometry. This is because with some tools\n"
"this function will not be able to create painting geometry."

#: flatcamTools/ToolNonCopperClear.py:121
msgid ""
"Tool Diameter. It's value (in current FlatCAM units)\n"
"is the cut width into the material."
msgstr ""
"Tool Diameter. It's value (in current FlatCAM units)\n"
"is the cut width into the material."

#: flatcamTools/ToolNonCopperClear.py:125
msgid ""
"The Tool Type (TT) can be:\n"
"- Circular with 1 ... 4 teeth -> it is informative only. Being circular,\n"
"the cut width in material is exactly the tool diameter.\n"
"- Ball -> informative only and make reference to the Ball type endmill.\n"
"- V-Shape -> it will disable de Z-Cut parameter in the resulting geometry UI "
"form\n"
"and enable two additional UI form fields in the resulting geometry: V-Tip "
"Dia and\n"
"V-Tip Angle. Adjusting those two values will adjust the Z-Cut parameter "
"such\n"
"as the cut width into material will be equal with the value in the Tool "
"Diameter\n"
"column of this table.\n"
"Choosing the 'V-Shape' Tool Type automatically will select the Operation "
"Type\n"
"in the resulting geometry as Isolation."
msgstr ""
"The Tool Type (TT) can be:\n"
"- Circular with 1 ... 4 teeth -> it is informative only. Being circular,\n"
"the cut width in material is exactly the tool diameter.\n"
"- Ball -> informative only and make reference to the Ball type endmill.\n"
"- V-Shape -> it will disable de Z-Cut parameter in the resulting geometry UI "
"form\n"
"and enable two additional UI form fields in the resulting geometry: V-Tip "
"Dia and\n"
"V-Tip Angle. Adjusting those two values will adjust the Z-Cut parameter "
"such\n"
"as the cut width into material will be equal with the value in the Tool "
"Diameter\n"
"column of this table.\n"
"Choosing the 'V-Shape' Tool Type automatically will select the Operation "
"Type\n"
"in the resulting geometry as Isolation."

#: flatcamTools/ToolNonCopperClear.py:138
msgid ""
"The 'Operation' can be:\n"
"- Isolation -> will ensure that the non-copper clearing is always complete.\n"
"If it's not successful then the non-copper clearing will fail, too.\n"
"- Clear -> the regular non-copper clearing."
msgstr ""
"The 'Operation' can be:\n"
"- Isolation -> will ensure that the non-copper clearing is always complete.\n"
"If it's not successful then the non-copper clearing will fail, too.\n"
"- Clear -> the regular non-copper clearing."

#: flatcamTools/ToolNonCopperClear.py:191
msgid "Tool Selection"
msgstr "Tool Selection"

#: flatcamTools/ToolNonCopperClear.py:214
msgid "Diameter for the new tool to add in the Tool Table"
msgstr "Diameter for the new tool to add in the Tool Table"

#: flatcamTools/ToolNonCopperClear.py:259 flatcamTools/ToolPaint.py:185
#: flatcamTools/ToolSolderPaste.py:122
msgid ""
"Delete a selection of tools in the Tool Table\n"
"by first selecting a row(s) in the Tool Table."
msgstr ""
"Delete a selection of tools in the Tool Table\n"
"by first selecting a row(s) in the Tool Table."

#: flatcamTools/ToolNonCopperClear.py:413 flatcamTools/ToolPaint.py:298
msgid "Area Selection"
msgstr "Area Selection"

#: flatcamTools/ToolNonCopperClear.py:414 flatcamTools/ToolPaint.py:300
msgid "Reference Object"
msgstr "Reference Object"

#: flatcamTools/ToolNonCopperClear.py:416
msgid "Reference:"
msgstr "Reference:"

#: flatcamTools/ToolNonCopperClear.py:431 flatcamTools/ToolPaint.py:315
msgid "Ref. Type"
msgstr "Ref. Type"

#: flatcamTools/ToolNonCopperClear.py:433
msgid ""
"The type of FlatCAM object to be used as non copper clearing reference.\n"
"It can be Gerber, Excellon or Geometry."
msgstr ""
"The type of FlatCAM object to be used as non copper clearing reference.\n"
"It can be Gerber, Excellon or Geometry."

#: flatcamTools/ToolNonCopperClear.py:442 flatcamTools/ToolPaint.py:326
msgid "Ref. Object"
msgstr "Ref. Object"

#: flatcamTools/ToolNonCopperClear.py:444 flatcamTools/ToolPaint.py:328
msgid "The FlatCAM object to be used as non copper clearing reference."
msgstr "The FlatCAM object to be used as non copper clearing reference."

#: flatcamTools/ToolNonCopperClear.py:457
msgid "Generate Geometry"
msgstr "Generate Geometry"

#: flatcamTools/ToolNonCopperClear.py:541 flatcamTools/ToolPaint.py:451
#: flatcamTools/ToolSolderPaste.py:463
msgid "New Tool"
msgstr "New Tool"

#: flatcamTools/ToolNonCopperClear.py:947 flatcamTools/ToolPaint.py:723
#: flatcamTools/ToolSolderPaste.py:794
msgid "Please enter a tool diameter to add, in Float format."
msgstr "Please enter a tool diameter to add, in Float format."

#: flatcamTools/ToolNonCopperClear.py:978 flatcamTools/ToolPaint.py:748
msgid "Adding tool cancelled. Tool already in Tool Table."
msgstr "Adding tool cancelled. Tool already in Tool Table."

#: flatcamTools/ToolNonCopperClear.py:983 flatcamTools/ToolPaint.py:754
msgid "New tool added to Tool Table."
msgstr "New tool added to Tool Table."

#: flatcamTools/ToolNonCopperClear.py:1027 flatcamTools/ToolPaint.py:800
msgid "Tool from Tool Table was edited."
msgstr "Tool from Tool Table was edited."

#: flatcamTools/ToolNonCopperClear.py:1038 flatcamTools/ToolPaint.py:812
#: flatcamTools/ToolSolderPaste.py:885
msgid "Edit cancelled. New diameter value is already in the Tool Table."
msgstr "Edit cancelled. New diameter value is already in the Tool Table."

#: flatcamTools/ToolNonCopperClear.py:1078 flatcamTools/ToolPaint.py:910
msgid "Delete failed. Select a tool to delete."
msgstr "Delete failed. Select a tool to delete."

#: flatcamTools/ToolNonCopperClear.py:1083 flatcamTools/ToolPaint.py:916
msgid "Tool(s) deleted from Tool Table."
msgstr "Tool(s) deleted from Tool Table."

#: flatcamTools/ToolNonCopperClear.py:1101
msgid "Overlap value must be between 0 (inclusive) and 1 (exclusive), "
msgstr "Overlap value must be between 0 (inclusive) and 1 (exclusive), "

#: flatcamTools/ToolNonCopperClear.py:1135
msgid "Wrong Tool Dia value format entered, use a number."
msgstr "Wrong Tool Dia value format entered, use a number."

#: flatcamTools/ToolNonCopperClear.py:1144 flatcamTools/ToolPaint.py:990
msgid "No selected tools in Tool Table."
msgstr "No selected tools in Tool Table."

#: flatcamTools/ToolNonCopperClear.py:1169
msgid "Click the start point of the area."
msgstr "Click the start point of the area."

#: flatcamTools/ToolNonCopperClear.py:1219 flatcamTools/ToolPaint.py:1100
msgid "Click the end point of the paint area."
msgstr "Click the end point of the paint area."

#: flatcamTools/ToolNonCopperClear.py:1225 flatcamTools/ToolPaint.py:1106
msgid "Zone added. Click to start adding next zone or right click to finish."
msgstr "Zone added. Click to start adding next zone or right click to finish."

#: flatcamTools/ToolNonCopperClear.py:1366
#: flatcamTools/ToolNonCopperClear.py:1368
msgid "Non-Copper clearing ..."
msgstr "Non-Copper clearing ..."

#: flatcamTools/ToolNonCopperClear.py:1378
msgid "NCC Tool started. Reading parameters."
msgstr "NCC Tool started. Reading parameters."

#: flatcamTools/ToolNonCopperClear.py:1441
msgid "NCC Tool. Preparing non-copper polygons."
msgstr "NCC Tool. Preparing non-copper polygons."

#: flatcamTools/ToolNonCopperClear.py:1469 flatcamTools/ToolPaint.py:2500
msgid "No object available."
msgstr "No object available."

#: flatcamTools/ToolNonCopperClear.py:1511
msgid "The reference object type is not supported."
msgstr "The reference object type is not supported."

#: flatcamTools/ToolNonCopperClear.py:1537
msgid ""
"NCC Tool. Finished non-copper polygons. Normal copper clearing task started."
msgstr ""
"NCC Tool. Finished non-copper polygons. Normal copper clearing task started."

#: flatcamTools/ToolNonCopperClear.py:1569
msgid "NCC Tool. Calculate 'empty' area."
msgstr "NCC Tool. Calculate 'empty' area."

#: flatcamTools/ToolNonCopperClear.py:1584
#: flatcamTools/ToolNonCopperClear.py:1682
#: flatcamTools/ToolNonCopperClear.py:1694
#: flatcamTools/ToolNonCopperClear.py:1932
#: flatcamTools/ToolNonCopperClear.py:2028
#: flatcamTools/ToolNonCopperClear.py:2040
msgid "Buffering finished"
msgstr "Buffering finished"

#: flatcamTools/ToolNonCopperClear.py:1701
#: flatcamTools/ToolNonCopperClear.py:2046
msgid "The selected object is not suitable for copper clearing."
msgstr "The selected object is not suitable for copper clearing."

#: flatcamTools/ToolNonCopperClear.py:1706
#: flatcamTools/ToolNonCopperClear.py:2051
msgid "Could not get the extent of the area to be non copper cleared."
msgstr "Could not get the extent of the area to be non copper cleared."

#: flatcamTools/ToolNonCopperClear.py:1713
msgid "NCC Tool. Finished calculation of 'empty' area."
msgstr "NCC Tool. Finished calculation of 'empty' area."

#: flatcamTools/ToolNonCopperClear.py:1726
#: flatcamTools/ToolNonCopperClear.py:2076
msgid "NCC Tool clearing with tool diameter = "
msgstr "NCC Tool clearing with tool diameter = "

#: flatcamTools/ToolNonCopperClear.py:1729
#: flatcamTools/ToolNonCopperClear.py:2079
msgid "started."
msgstr "started."

#: flatcamTools/ToolNonCopperClear.py:1871
msgid ""
"There is no NCC Geometry in the file.\n"
"Usually it means that the tool diameter is too big for the painted "
"geometry.\n"
"Change the painting parameters and try again."
msgstr ""
"There is no NCC Geometry in the file.\n"
"Usually it means that the tool diameter is too big for the painted "
"geometry.\n"
"Change the painting parameters and try again."

#: flatcamTools/ToolNonCopperClear.py:1881
msgid "NCC Tool clear all done."
msgstr "NCC Tool clear all done."

#: flatcamTools/ToolNonCopperClear.py:1883
msgid "NCC Tool clear all done but the copper features isolation is broken for"
msgstr ""
"NCC Tool clear all done but the copper features isolation is broken for"

#: flatcamTools/ToolNonCopperClear.py:1886
#: flatcamTools/ToolNonCopperClear.py:2252
msgid "tools"
msgstr "tools"

#: flatcamTools/ToolNonCopperClear.py:2248
msgid "NCC Tool Rest Machining clear all done."
msgstr "NCC Tool Rest Machining clear all done."

#: flatcamTools/ToolNonCopperClear.py:2251
msgid ""
"NCC Tool Rest Machining clear all done but the copper features isolation is "
"broken for"
msgstr ""
"NCC Tool Rest Machining clear all done but the copper features isolation is "
"broken for"

#: flatcamTools/ToolNonCopperClear.py:2687
msgid ""
"Try to use the Buffering Type = Full in Preferences -> Gerber General. "
"Reload the Gerber file after this change."
msgstr ""
"Try to use the Buffering Type = Full in Preferences -> Gerber General. "
"Reload the Gerber file after this change."

#: flatcamTools/ToolOptimal.py:71
msgid "Number of decimals kept for found distances."
msgstr "Number of decimals kept for found distances."

#: flatcamTools/ToolOptimal.py:79
msgid "Minimum distance"
msgstr "Minimum distance"

#: flatcamTools/ToolOptimal.py:80
msgid "Display minimum distance between copper features."
msgstr "Display minimum distance between copper features."

#: flatcamTools/ToolOptimal.py:84
msgid "Determined"
msgstr "Determined"

#: flatcamTools/ToolOptimal.py:98
msgid "Occurring"
msgstr "Occurring"

#: flatcamTools/ToolOptimal.py:99
msgid "How many times this minimum is found."
msgstr "How many times this minimum is found."

#: flatcamTools/ToolOptimal.py:105
msgid "Minimum points coordinates"
msgstr "Minimum points coordinates"

#: flatcamTools/ToolOptimal.py:106
msgid "Coordinates for points where minimum distance was found."
msgstr "Coordinates for points where minimum distance was found."

#: flatcamTools/ToolOptimal.py:122 flatcamTools/ToolOptimal.py:190
msgid "Jump to selected position"
msgstr "Jump to selected position"

#: flatcamTools/ToolOptimal.py:124 flatcamTools/ToolOptimal.py:192
msgid ""
"Select a position in the Locations text box and then\n"
"click this button."
msgstr ""
"Select a position in the Locations text box and then\n"
"click this button."

#: flatcamTools/ToolOptimal.py:132
msgid "Other distances"
msgstr "Other distances"

#: flatcamTools/ToolOptimal.py:133
msgid ""
"Will display other distances in the Gerber file ordered from\n"
"the minimum to the maximum, not including the absolute minimum."
msgstr ""
"Will display other distances in the Gerber file ordered from\n"
"the minimum to the maximum, not including the absolute minimum."

#: flatcamTools/ToolOptimal.py:138
msgid "Other distances points coordinates"
msgstr "Other distances points coordinates"

#: flatcamTools/ToolOptimal.py:139 flatcamTools/ToolOptimal.py:153
#: flatcamTools/ToolOptimal.py:173
msgid ""
"Other distances and the coordinates for points\n"
"where the distance was found."
msgstr ""
"Other distances and the coordinates for points\n"
"where the distance was found."

#: flatcamTools/ToolOptimal.py:152
msgid "Gerber distances"
msgstr "Gerber distances"

#: flatcamTools/ToolOptimal.py:172
msgid "Points coordinates"
msgstr "Points coordinates"

#: flatcamTools/ToolOptimal.py:200
msgid "Find Minimum"
msgstr "Find Minimum"

#: flatcamTools/ToolOptimal.py:202
msgid ""
"Calculate the minimum distance between copper features,\n"
"this will allow the determination of the right tool to\n"
"use for isolation or copper clearing."
msgstr ""
"Calculate the minimum distance between copper features,\n"
"this will allow the determination of the right tool to\n"
"use for isolation or copper clearing."

#: flatcamTools/ToolOptimal.py:306
msgid "Only Gerber objects can be evaluated."
msgstr "Only Gerber objects can be evaluated."

#: flatcamTools/ToolOptimal.py:309 flatcamTools/ToolPanelize.py:763
#: flatcamTools/ToolRulesCheck.py:1093
msgid "Working..."
msgstr "Working..."

#: flatcamTools/ToolOptimal.py:312
msgid ""
"Optimal Tool. Started to search for the minimum distance between copper "
"features."
msgstr ""
"Optimal Tool. Started to search for the minimum distance between copper "
"features."

#: flatcamTools/ToolOptimal.py:322
msgid "Optimal Tool. Parsing geometry for aperture"
msgstr "Optimal Tool. Parsing geometry for aperture"

#: flatcamTools/ToolOptimal.py:333
msgid "Optimal Tool. Creating a buffer for the object geometry."
msgstr "Optimal Tool. Creating a buffer for the object geometry."

#: flatcamTools/ToolOptimal.py:343
msgid ""
"The Gerber object has one Polygon as geometry.\n"
"There are no distances between geometry elements to be found."
msgstr ""
"The Gerber object has one Polygon as geometry.\n"
"There are no distances between geometry elements to be found."

#: flatcamTools/ToolOptimal.py:348
msgid ""
"Optimal Tool. Finding the distances between each two elements. Iterations"
msgstr ""
"Optimal Tool. Finding the distances between each two elements. Iterations"

#: flatcamTools/ToolOptimal.py:383
msgid "Optimal Tool. Finding the minimum distance."
msgstr "Optimal Tool. Finding the minimum distance."

#: flatcamTools/ToolOptimal.py:399
msgid "Optimal Tool. Finished successfully."
msgstr "Optimal Tool. Finished successfully."

#: flatcamTools/ToolPDF.py:151 flatcamTools/ToolPDF.py:155
msgid "Open PDF"
msgstr "Open PDF"

#: flatcamTools/ToolPDF.py:158
msgid "Open PDF cancelled"
msgstr "Open PDF cancelled"

#: flatcamTools/ToolPDF.py:189
msgid "Parsing PDF file ..."
msgstr "Parsing PDF file ..."

#: flatcamTools/ToolPDF.py:272 flatcamTools/ToolPDF.py:347
#, python-format
msgid "Rendering PDF layer #%d ..."
msgstr "Rendering PDF layer #%d ..."

#: flatcamTools/ToolPDF.py:277 flatcamTools/ToolPDF.py:352
msgid "Open PDF file failed."
msgstr "Open PDF file failed."

#: flatcamTools/ToolPDF.py:283 flatcamTools/ToolPDF.py:357
msgid "Rendered"
msgstr "Rendered"

#: flatcamTools/ToolPaint.py:70
msgid ""
"Specify the type of object to be painted.\n"
"It can be of type: Gerber or Geometry.\n"
"What is selected here will dictate the kind\n"
"of objects that will populate the 'Object' combobox."
msgstr ""
"Specify the type of object to be painted.\n"
"It can be of type: Gerber or Geometry.\n"
"What is selected here will dictate the kind\n"
"of objects that will populate the 'Object' combobox."

#: flatcamTools/ToolPaint.py:87
msgid "Object to be painted."
msgstr "Object to be painted."

#: flatcamTools/ToolPaint.py:97
msgid ""
"Tools pool from which the algorithm\n"
"will pick the ones used for painting."
msgstr ""
"Tools pool from which the algorithm\n"
"will pick the ones used for painting."

#: flatcamTools/ToolPaint.py:112
msgid ""
"This is the Tool Number.\n"
"Painting will start with the tool with the biggest diameter,\n"
"continuing until there are no more tools.\n"
"Only tools that create painting geometry will still be present\n"
"in the resulting geometry. This is because with some tools\n"
"this function will not be able to create painting geometry."
msgstr ""
"This is the Tool Number.\n"
"Painting will start with the tool with the biggest diameter,\n"
"continuing until there are no more tools.\n"
"Only tools that create painting geometry will still be present\n"
"in the resulting geometry. This is because with some tools\n"
"this function will not be able to create painting geometry."

#: flatcamTools/ToolPaint.py:124
msgid ""
"The Tool Type (TT) can be:<BR>- <B>Circular</B> with 1 ... 4 teeth -> it is "
"informative only. Being circular, <BR>the cut width in material is exactly "
"the tool diameter.<BR>- <B>Ball</B> -> informative only and make reference "
"to the Ball type endmill.<BR>- <B>V-Shape</B> -> it will disable de Z-Cut "
"parameter in the resulting geometry UI form and enable two additional UI "
"form fields in the resulting geometry: V-Tip Dia and V-Tip Angle. Adjusting "
"those two values will adjust the Z-Cut parameter such as the cut width into "
"material will be equal with the value in the Tool Diameter column of this "
"table.<BR>Choosing the <B>V-Shape</B> Tool Type automatically will select "
"the Operation Type in the resulting geometry as Isolation."
msgstr ""
"The Tool Type (TT) can be:<BR>- <B>Circular</B> with 1 ... 4 teeth -> it is "
"informative only. Being circular, <BR>the cut width in material is exactly "
"the tool diameter.<BR>- <B>Ball</B> -> informative only and make reference "
"to the Ball type endmill.<BR>- <B>V-Shape</B> -> it will disable de Z-Cut "
"parameter in the resulting geometry UI form and enable two additional UI "
"form fields in the resulting geometry: V-Tip Dia and V-Tip Angle. Adjusting "
"those two values will adjust the Z-Cut parameter such as the cut width into "
"material will be equal with the value in the Tool Diameter column of this "
"table.<BR>Choosing the <B>V-Shape</B> Tool Type automatically will select "
"the Operation Type in the resulting geometry as Isolation."

#: flatcamTools/ToolPaint.py:161
msgid "Diameter for the new tool."
msgstr "Diameter for the new tool."

#: flatcamTools/ToolPaint.py:238
msgid ""
"Algorithm for painting:\n"
"- Standard: Fixed step inwards.\n"
"- Seed-based: Outwards from seed.\n"
"- Line-based: Parallel lines."
msgstr ""
"Algorithm for painting:\n"
"- Standard: Fixed step inwards.\n"
"- Seed-based: Outwards from seed.\n"
"- Line-based: Parallel lines."

#: flatcamTools/ToolPaint.py:272
msgid ""
"If checked, use 'rest machining'.\n"
"Basically it will clear copper outside PCB features,\n"
"using the biggest tool and continue with the next tools,\n"
"from bigger to smaller, to clear areas of copper that\n"
"could not be cleared by previous tool, until there is\n"
"no more copper to clear or there are no more tools.\n"
"\n"
"If not checked, use the standard algorithm."
msgstr ""
"If checked, use 'rest machining'.\n"
"Basically it will clear copper outside PCB features,\n"
"using the biggest tool and continue with the next tools,\n"
"from bigger to smaller, to clear areas of copper that\n"
"could not be cleared by previous tool, until there is\n"
"no more copper to clear or there are no more tools.\n"
"\n"
"If not checked, use the standard algorithm."

#: flatcamTools/ToolPaint.py:297
msgid "Single Polygon"
msgstr "Single Polygon"

#: flatcamTools/ToolPaint.py:299
msgid "All Polygons"
msgstr "All Polygons"

#: flatcamTools/ToolPaint.py:317
msgid ""
"The type of FlatCAM object to be used as paint reference.\n"
"It can be Gerber, Excellon or Geometry."
msgstr ""
"The type of FlatCAM object to be used as paint reference.\n"
"It can be Gerber, Excellon or Geometry."

#: flatcamTools/ToolPaint.py:342
msgid "Create Paint Geometry"
msgstr "Create Paint Geometry"

#: flatcamTools/ToolPaint.py:344
msgid ""
"- 'Area Selection' - left mouse click to start selection of the area to be "
"painted.\n"
"Keeping a modifier key pressed (CTRL or SHIFT) will allow to add multiple "
"areas.\n"
"- 'All Polygons' - the Paint will start after click.\n"
"- 'Reference Object' -  will do non copper clearing within the area\n"
"specified by another object."
msgstr ""
"- 'Area Selection' - left mouse click to start selection of the area to be "
"painted.\n"
"Keeping a modifier key pressed (CTRL or SHIFT) will allow to add multiple "
"areas.\n"
"- 'All Polygons' - the Paint will start after click.\n"
"- 'Reference Object' -  will do non copper clearing within the area\n"
"specified by another object."

#: flatcamTools/ToolPaint.py:930
msgid "Paint Tool. Reading parameters."
msgstr "Paint Tool. Reading parameters."

#: flatcamTools/ToolPaint.py:936
msgid "Overlap value must be between 0 (inclusive) and 1 (exclusive)"
msgstr "Overlap value must be between 0 (inclusive) and 1 (exclusive)"

#: flatcamTools/ToolPaint.py:940 flatcamTools/ToolPaint.py:1003
msgid "Click inside the desired polygon."
msgstr "Click inside the desired polygon."

#: flatcamTools/ToolPaint.py:954
#, python-format
msgid "Could not retrieve object: %s"
msgstr "Could not retrieve object: %s"

#: flatcamTools/ToolPaint.py:968
msgid "Can't do Paint on MultiGeo geometries"
msgstr "Can't do Paint on MultiGeo geometries"

#: flatcamTools/ToolPaint.py:1012 flatcamTools/ToolPaint.py:1285
msgid "Painting polygon..."
msgstr "Painting polygon..."

#: flatcamTools/ToolPaint.py:1043
msgid "Click the start point of the paint area."
msgstr "Click the start point of the paint area."

#: flatcamTools/ToolPaint.py:1241 flatcamTools/ToolPaint.py:1245
#: flatcamTools/ToolPaint.py:1248 flatcamTools/ToolPaint.py:1287
#: flatcamTools/ToolPaint.py:1814 flatcamTools/ToolPaint.py:1818
#: flatcamTools/ToolPaint.py:1821 flatcamTools/ToolPaint.py:2103
#: flatcamTools/ToolPaint.py:2108 flatcamTools/ToolPaint.py:2111
#: flatcamTools/ToolPaint.py:2285 flatcamTools/ToolPaint.py:2292
msgid "Paint Tool."
msgstr "Paint Tool."

#: flatcamTools/ToolPaint.py:1241 flatcamTools/ToolPaint.py:1245
#: flatcamTools/ToolPaint.py:1248
msgid "Normal painting polygon task started."
msgstr "Normal painting polygon task started."

#: flatcamTools/ToolPaint.py:1242 flatcamTools/ToolPaint.py:1640
#: flatcamTools/ToolPaint.py:1815 flatcamTools/ToolPaint.py:2105
#: flatcamTools/ToolPaint.py:2287
msgid "Buffering geometry..."
msgstr "Buffering geometry..."

#: flatcamTools/ToolPaint.py:1282
msgid "No polygon found."
msgstr "No polygon found."

#: flatcamTools/ToolPaint.py:1287
msgid "Painting polygon at location"
msgstr "Painting polygon at location"

#: flatcamTools/ToolPaint.py:1370
msgid "Geometry could not be painted completely"
msgstr "Geometry could not be painted completely"

#: flatcamTools/ToolPaint.py:1415
msgid ""
"Could not do Paint. Try a different combination of parameters. Or a "
"different strategy of paint"
msgstr ""
"Could not do Paint. Try a different combination of parameters. Or a "
"different strategy of paint"

#: flatcamTools/ToolPaint.py:1459 flatcamTools/ToolPaint.py:1794
#: flatcamTools/ToolPaint.py:1944 flatcamTools/ToolPaint.py:2265
#: flatcamTools/ToolPaint.py:2419
msgid ""
"There is no Painting Geometry in the file.\n"
"Usually it means that the tool diameter is too big for the painted "
"geometry.\n"
"Change the painting parameters and try again."
msgstr ""
"There is no Painting Geometry in the file.\n"
"Usually it means that the tool diameter is too big for the painted "
"geometry.\n"
"Change the painting parameters and try again."

#: flatcamTools/ToolPaint.py:1464
msgid "Paint Single Done."
msgstr "Paint Single Done."

#: flatcamTools/ToolPaint.py:1496 flatcamTools/ToolPaint.py:1972
#: flatcamTools/ToolPaint.py:2447
msgid "Polygon Paint started ..."
msgstr "Polygon Paint started ..."

#: flatcamTools/ToolPaint.py:1557 flatcamTools/ToolPaint.py:2034
msgid "Painting polygons..."
msgstr "Painting polygons..."

#: flatcamTools/ToolPaint.py:1639 flatcamTools/ToolPaint.py:1642
#: flatcamTools/ToolPaint.py:1644
msgid "Paint Tool. Normal painting all task started."
msgstr "Paint Tool. Normal painting all task started."

#: flatcamTools/ToolPaint.py:1678 flatcamTools/ToolPaint.py:1850
#: flatcamTools/ToolPaint.py:2152 flatcamTools/ToolPaint.py:2328
msgid "Painting with tool diameter = "
msgstr "Painting with tool diameter = "

#: flatcamTools/ToolPaint.py:1681 flatcamTools/ToolPaint.py:1853
#: flatcamTools/ToolPaint.py:2155 flatcamTools/ToolPaint.py:2331
msgid "started"
msgstr "started"

#: flatcamTools/ToolPaint.py:1743 flatcamTools/ToolPaint.py:1899
#: flatcamTools/ToolPaint.py:2215 flatcamTools/ToolPaint.py:2375
msgid ""
"Could not do Paint All. Try a different combination of parameters. Or a "
"different Method of paint"
msgstr ""
"Could not do Paint All. Try a different combination of parameters. Or a "
"different Method of paint"

#: flatcamTools/ToolPaint.py:1803
msgid "Paint All Done."
msgstr "Paint All Done."

#: flatcamTools/ToolPaint.py:1814 flatcamTools/ToolPaint.py:1818
#: flatcamTools/ToolPaint.py:1821
msgid "Rest machining painting all task started."
msgstr "Rest machining painting all task started."

#: flatcamTools/ToolPaint.py:1953 flatcamTools/ToolPaint.py:2428
msgid "Paint All with Rest-Machining done."
msgstr "Paint All with Rest-Machining done."

#: flatcamTools/ToolPaint.py:2104 flatcamTools/ToolPaint.py:2108
#: flatcamTools/ToolPaint.py:2111
msgid "Normal painting area task started."
msgstr "Normal painting area task started."

#: flatcamTools/ToolPaint.py:2274
msgid "Paint Area Done."
msgstr "Paint Area Done."

#: flatcamTools/ToolPaint.py:2286 flatcamTools/ToolPaint.py:2292
msgid "Rest machining painting area task started."
msgstr "Rest machining painting area task started."

#: flatcamTools/ToolPaint.py:2289
msgid "Paint Tool. Rest machining painting area task started."
msgstr "Paint Tool. Rest machining painting area task started."

#: flatcamTools/ToolPanelize.py:24
msgid "Panelize PCB"
msgstr "Panelize PCB"

#: flatcamTools/ToolPanelize.py:57
msgid ""
"Specify the type of object to be panelized\n"
"It can be of type: Gerber, Excellon or Geometry.\n"
"The selection here decide the type of objects that will be\n"
"in the Object combobox."
msgstr ""
"Specify the type of object to be panelized\n"
"It can be of type: Gerber, Excellon or Geometry.\n"
"The selection here decide the type of objects that will be\n"
"in the Object combobox."

#: flatcamTools/ToolPanelize.py:72
msgid ""
"Object to be panelized. This means that it will\n"
"be duplicated in an array of rows and columns."
msgstr ""
"Object to be panelized. This means that it will\n"
"be duplicated in an array of rows and columns."

#: flatcamTools/ToolPanelize.py:85
msgid "Penelization Reference"
msgstr "Penelization Reference"

#: flatcamTools/ToolPanelize.py:87
msgid ""
"Choose the reference for panelization:\n"
"- Object = the bounding box of a different object\n"
"- Bounding Box = the bounding box of the object to be panelized\n"
"\n"
"The reference is useful when doing panelization for more than one\n"
"object. The spacings (really offsets) will be applied in reference\n"
"to this reference object therefore maintaining the panelized\n"
"objects in sync."
msgstr ""
"Choose the reference for panelization:\n"
"- Object = the bounding box of a different object\n"
"- Bounding Box = the bounding box of the object to be panelized\n"
"\n"
"The reference is useful when doing panelization for more than one\n"
"object. The spacings (really offsets) will be applied in reference\n"
"to this reference object therefore maintaining the panelized\n"
"objects in sync."

#: flatcamTools/ToolPanelize.py:110
msgid "Box Type"
msgstr "Box Type"

#: flatcamTools/ToolPanelize.py:112
msgid ""
"Specify the type of object to be used as an container for\n"
"panelization. It can be: Gerber or Geometry type.\n"
"The selection here decide the type of objects that will be\n"
"in the Box Object combobox."
msgstr ""
"Specify the type of object to be used as an container for\n"
"panelization. It can be: Gerber or Geometry type.\n"
"The selection here decide the type of objects that will be\n"
"in the Box Object combobox."

#: flatcamTools/ToolPanelize.py:127
msgid ""
"The actual object that is used a container for the\n"
" selected object that is to be panelized."
msgstr ""
"The actual object that is used a container for the\n"
" selected object that is to be panelized."

#: flatcamTools/ToolPanelize.py:133
msgid "Panel Data"
msgstr "Panel Data"

#: flatcamTools/ToolPanelize.py:135
msgid ""
"This informations will shape the resulting panel.\n"
"The number of rows and columns will set how many\n"
"duplicates of the original geometry will be generated.\n"
"\n"
"The spacings will set the distance between any two\n"
"elements of the panel array."
msgstr ""
"This informations will shape the resulting panel.\n"
"The number of rows and columns will set how many\n"
"duplicates of the original geometry will be generated.\n"
"\n"
"The spacings will set the distance between any two\n"
"elements of the panel array."

#: flatcamTools/ToolPanelize.py:194
msgid ""
"Choose the type of object for the panel object:\n"
"- Geometry\n"
"- Gerber"
msgstr ""
"Choose the type of object for the panel object:\n"
"- Geometry\n"
"- Gerber"

#: flatcamTools/ToolPanelize.py:202
msgid "Constrain panel within"
msgstr "Constrain panel within"

#: flatcamTools/ToolPanelize.py:242
msgid "Panelize Object"
msgstr "Panelize Object"

#: flatcamTools/ToolPanelize.py:244 flatcamTools/ToolRulesCheck.py:487
msgid ""
"Panelize the specified object around the specified box.\n"
"In other words it creates multiple copies of the source object,\n"
"arranged in a 2D array of rows and columns."
msgstr ""
"Panelize the specified object around the specified box.\n"
"In other words it creates multiple copies of the source object,\n"
"arranged in a 2D array of rows and columns."

#: flatcamTools/ToolPanelize.py:292
msgid "Panel. Tool"
msgstr "Panel. Tool"

#: flatcamTools/ToolPanelize.py:423
msgid "Columns or Rows are zero value. Change them to a positive integer."
msgstr "Columns or Rows are zero value. Change them to a positive integer."

#: flatcamTools/ToolPanelize.py:448
msgid "Generating panel ... "
msgstr "Generating panel ... "

#: flatcamTools/ToolPanelize.py:734
msgid "Generating panel ... Adding the Gerber code."
msgstr "Generating panel ... Adding the Gerber code."

#: flatcamTools/ToolPanelize.py:746
msgid "Generating panel... Spawning copies"
msgstr "Generating panel... Spawning copies"

#: flatcamTools/ToolPanelize.py:756
msgid "Panel done..."
msgstr "Panel done..."

#: flatcamTools/ToolPanelize.py:759
#, python-brace-format
msgid ""
"{text} Too big for the constrain area. Final panel has {col} columns and "
"{row} rows"
msgstr ""
"{text} Too big for the constrain area. Final panel has {col} columns and "
"{row} rows"

#: flatcamTools/ToolPanelize.py:768
msgid "Panel created successfully."
msgstr "Panel created successfully."

#: flatcamTools/ToolPcbWizard.py:31
msgid "PcbWizard Import Tool"
msgstr "PcbWizard Import Tool"

#: flatcamTools/ToolPcbWizard.py:39
msgid "Import 2-file Excellon"
msgstr "Import 2-file Excellon"

#: flatcamTools/ToolPcbWizard.py:50
msgid "Load files"
msgstr "Load files"

#: flatcamTools/ToolPcbWizard.py:56
msgid "Excellon file"
msgstr "Excellon file"

#: flatcamTools/ToolPcbWizard.py:58
msgid ""
"Load the Excellon file.\n"
"Usually it has a .DRL extension"
msgstr ""
"Load the Excellon file.\n"
"Usually it has a .DRL extension"

#: flatcamTools/ToolPcbWizard.py:64
msgid "INF file"
msgstr "INF file"

#: flatcamTools/ToolPcbWizard.py:66
msgid "Load the INF file."
msgstr "Load the INF file."

#: flatcamTools/ToolPcbWizard.py:78
msgid "Tool Number"
msgstr "Tool Number"

#: flatcamTools/ToolPcbWizard.py:80
msgid "Tool diameter in file units."
msgstr "Tool diameter in file units."

#: flatcamTools/ToolPcbWizard.py:86
msgid "Excellon format"
msgstr "Excellon format"

#: flatcamTools/ToolPcbWizard.py:94
msgid "Int. digits"
msgstr "Int. digits"

#: flatcamTools/ToolPcbWizard.py:96
msgid "The number of digits for the integral part of the coordinates."
msgstr "The number of digits for the integral part of the coordinates."

#: flatcamTools/ToolPcbWizard.py:103
msgid "Frac. digits"
msgstr "Frac. digits"

#: flatcamTools/ToolPcbWizard.py:105
msgid "The number of digits for the fractional part of the coordinates."
msgstr "The number of digits for the fractional part of the coordinates."

#: flatcamTools/ToolPcbWizard.py:112
msgid "No Suppression"
msgstr "No Suppression"

#: flatcamTools/ToolPcbWizard.py:113
msgid "Zeros supp."
msgstr "Zeros supp."

#: flatcamTools/ToolPcbWizard.py:115
msgid ""
"The type of zeros suppression used.\n"
"Can be of type:\n"
"- LZ = leading zeros are kept\n"
"- TZ = trailing zeros are kept\n"
"- No Suppression = no zero suppression"
msgstr ""
"The type of zeros suppression used.\n"
"Can be of type:\n"
"- LZ = leading zeros are kept\n"
"- TZ = trailing zeros are kept\n"
"- No Suppression = no zero suppression"

#: flatcamTools/ToolPcbWizard.py:128
msgid ""
"The type of units that the coordinates and tool\n"
"diameters are using. Can be INCH or MM."
msgstr ""
"The type of units that the coordinates and tool\n"
"diameters are using. Can be INCH or MM."

#: flatcamTools/ToolPcbWizard.py:135
msgid "Import Excellon"
msgstr "Import Excellon"

#: flatcamTools/ToolPcbWizard.py:137
msgid ""
"Import in FlatCAM an Excellon file\n"
"that store it's information's in 2 files.\n"
"One usually has .DRL extension while\n"
"the other has .INF extension."
msgstr ""
"Import in FlatCAM an Excellon file\n"
"that store it's information's in 2 files.\n"
"One usually has .DRL extension while\n"
"the other has .INF extension."

#: flatcamTools/ToolPcbWizard.py:196
msgid "PCBWizard Tool"
msgstr "PCBWizard Tool"

#: flatcamTools/ToolPcbWizard.py:290 flatcamTools/ToolPcbWizard.py:294
msgid "Load PcbWizard Excellon file"
msgstr "Load PcbWizard Excellon file"

#: flatcamTools/ToolPcbWizard.py:313 flatcamTools/ToolPcbWizard.py:317
msgid "Load PcbWizard INF file"
msgstr "Load PcbWizard INF file"

#: flatcamTools/ToolPcbWizard.py:365
msgid ""
"The INF file does not contain the tool table.\n"
"Try to open the Excellon file from File -> Open -> Excellon\n"
"and edit the drill diameters manually."
msgstr ""
"The INF file does not contain the tool table.\n"
"Try to open the Excellon file from File -> Open -> Excellon\n"
"and edit the drill diameters manually."

#: flatcamTools/ToolPcbWizard.py:386
msgid "PcbWizard .INF file loaded."
msgstr "PcbWizard .INF file loaded."

#: flatcamTools/ToolPcbWizard.py:391
msgid "Main PcbWizard Excellon file loaded."
msgstr "Main PcbWizard Excellon file loaded."

#: flatcamTools/ToolPcbWizard.py:430
msgid "Cannot parse file"
msgstr "Cannot parse file"

#: flatcamTools/ToolPcbWizard.py:455
msgid "Importing Excellon."
msgstr "Importing Excellon."

#: flatcamTools/ToolPcbWizard.py:462
msgid "Import Excellon file failed."
msgstr "Import Excellon file failed."

#: flatcamTools/ToolPcbWizard.py:470
msgid "Imported"
msgstr "Imported"

#: flatcamTools/ToolPcbWizard.py:474
msgid "Excellon merging is in progress. Please wait..."
msgstr "Excellon merging is in progress. Please wait..."

#: flatcamTools/ToolPcbWizard.py:477
msgid "The imported Excellon file is None."
msgstr "The imported Excellon file is None."

#: flatcamTools/ToolProperties.py:111
msgid "Properties Tool was not displayed. No object selected."
msgstr "Properties Tool was not displayed. No object selected."

#: flatcamTools/ToolProperties.py:119
msgid "Object Properties are displayed."
msgstr "Object Properties are displayed."

#: flatcamTools/ToolProperties.py:120
msgid "Properties Tool"
msgstr "Properties Tool"

#: flatcamTools/ToolProperties.py:129
msgid "TYPE"
msgstr "TYPE"

#: flatcamTools/ToolProperties.py:130
msgid "NAME"
msgstr "NAME"

#: flatcamTools/ToolProperties.py:131
msgid "Dimensions"
msgstr "Dimensions"

#: flatcamTools/ToolProperties.py:145
msgid "Geo Type"
msgstr "Geo Type"

#: flatcamTools/ToolProperties.py:146
msgid "Single-Geo"
msgstr "Single-Geo"

#: flatcamTools/ToolProperties.py:146
msgid "Multi-Geo"
msgstr "Multi-Geo"

#: flatcamTools/ToolProperties.py:154
msgid "Calculating dimensions ... Please wait."
msgstr "Calculating dimensions ... Please wait."

#: flatcamTools/ToolProperties.py:245
msgid "Inch"
msgstr "Inch"

#: flatcamTools/ToolProperties.py:246
msgid "Metric"
msgstr "Metric"

#: flatcamTools/ToolProperties.py:297 flatcamTools/ToolProperties.py:311
#: flatcamTools/ToolProperties.py:314 flatcamTools/ToolProperties.py:317
msgid "Present"
msgstr "Present"

#: flatcamTools/ToolProperties.py:351
msgid "Width"
msgstr "Width"

#: flatcamTools/ToolProperties.py:356 flatcamTools/ToolProperties.py:360
msgid "Box Area"
msgstr "Box Area"

#: flatcamTools/ToolProperties.py:357 flatcamTools/ToolProperties.py:361
msgid "Convex_Hull Area"
msgstr "Convex_Hull Area"

#: flatcamTools/ToolRulesCheck.py:28
msgid "Check Rules"
msgstr "Check Rules"

#: flatcamTools/ToolRulesCheck.py:56
msgid "Gerber Files"
msgstr "Gerber Files"

#: flatcamTools/ToolRulesCheck.py:58
msgid "Gerber objects for which to check rules."
msgstr "Gerber objects for which to check rules."

#: flatcamTools/ToolRulesCheck.py:72
msgid "Top"
msgstr "Top"

#: flatcamTools/ToolRulesCheck.py:74
msgid "The Top Gerber Copper object for which rules are checked."
msgstr "The Top Gerber Copper object for which rules are checked."

#: flatcamTools/ToolRulesCheck.py:89
msgid "Bottom"
msgstr "Bottom"

#: flatcamTools/ToolRulesCheck.py:91
msgid "The Bottom Gerber Copper object for which rules are checked."
msgstr "The Bottom Gerber Copper object for which rules are checked."

#: flatcamTools/ToolRulesCheck.py:106
msgid "SM Top"
msgstr "SM Top"

#: flatcamTools/ToolRulesCheck.py:108
msgid "The Top Gerber Solder Mask object for which rules are checked."
msgstr "The Top Gerber Solder Mask object for which rules are checked."

#: flatcamTools/ToolRulesCheck.py:123
msgid "SM Bottom"
msgstr "SM Bottom"

#: flatcamTools/ToolRulesCheck.py:125
msgid "The Bottom Gerber Solder Mask object for which rules are checked."
msgstr "The Bottom Gerber Solder Mask object for which rules are checked."

#: flatcamTools/ToolRulesCheck.py:140
msgid "Silk Top"
msgstr "Silk Top"

#: flatcamTools/ToolRulesCheck.py:142
msgid "The Top Gerber Silkscreen object for which rules are checked."
msgstr "The Top Gerber Silkscreen object for which rules are checked."

#: flatcamTools/ToolRulesCheck.py:157
msgid "Silk Bottom"
msgstr "Silk Bottom"

#: flatcamTools/ToolRulesCheck.py:159
msgid "The Bottom Gerber Silkscreen object for which rules are checked."
msgstr "The Bottom Gerber Silkscreen object for which rules are checked."

#: flatcamTools/ToolRulesCheck.py:174
msgid "Outline"
msgstr "Outline"

#: flatcamTools/ToolRulesCheck.py:176
msgid "The Gerber Outline (Cutout) object for which rules are checked."
msgstr "The Gerber Outline (Cutout) object for which rules are checked."

#: flatcamTools/ToolRulesCheck.py:187
msgid "Excellon Objects"
msgstr "Excellon Objects"

#: flatcamTools/ToolRulesCheck.py:189
msgid "Excellon objects for which to check rules."
msgstr "Excellon objects for which to check rules."

#: flatcamTools/ToolRulesCheck.py:200
msgid "Excellon 1"
msgstr "Excellon 1"

#: flatcamTools/ToolRulesCheck.py:202
msgid ""
"Excellon object for which to check rules.\n"
"Holds the plated holes or a general Excellon file content."
msgstr ""
"Excellon object for which to check rules.\n"
"Holds the plated holes or a general Excellon file content."

#: flatcamTools/ToolRulesCheck.py:218
msgid "Excellon 2"
msgstr "Excellon 2"

#: flatcamTools/ToolRulesCheck.py:220
msgid ""
"Excellon object for which to check rules.\n"
"Holds the non-plated holes."
msgstr ""
"Excellon object for which to check rules.\n"
"Holds the non-plated holes."

#: flatcamTools/ToolRulesCheck.py:233
msgid "All Rules"
msgstr "All Rules"

#: flatcamTools/ToolRulesCheck.py:235
msgid "This check/uncheck all the rules below."
msgstr "This check/uncheck all the rules below."

#: flatcamTools/ToolRulesCheck.py:485
msgid "Run Rules Check"
msgstr "Run Rules Check"

#: flatcamTools/ToolRulesCheck.py:1124 flatcamTools/ToolRulesCheck.py:1184
#: flatcamTools/ToolRulesCheck.py:1221 flatcamTools/ToolRulesCheck.py:1293
#: flatcamTools/ToolRulesCheck.py:1347 flatcamTools/ToolRulesCheck.py:1385
#: flatcamTools/ToolRulesCheck.py:1450
msgid "Value is not valid."
msgstr "Value is not valid."

#: flatcamTools/ToolRulesCheck.py:1138
msgid "TOP -> Copper to Copper clearance"
msgstr "TOP -> Copper to Copper clearance"

#: flatcamTools/ToolRulesCheck.py:1149
msgid "BOTTOM -> Copper to Copper clearance"
msgstr "BOTTOM -> Copper to Copper clearance"

#: flatcamTools/ToolRulesCheck.py:1154 flatcamTools/ToolRulesCheck.py:1248
#: flatcamTools/ToolRulesCheck.py:1412
msgid ""
"At least one Gerber object has to be selected for this rule but none is "
"selected."
msgstr ""
"At least one Gerber object has to be selected for this rule but none is "
"selected."

#: flatcamTools/ToolRulesCheck.py:1190
msgid ""
"One of the copper Gerber objects or the Outline Gerber object is not valid."
msgstr ""
"One of the copper Gerber objects or the Outline Gerber object is not valid."

#: flatcamTools/ToolRulesCheck.py:1203 flatcamTools/ToolRulesCheck.py:1367
msgid ""
"Outline Gerber object presence is mandatory for this rule but it is not "
"selected."
msgstr ""
"Outline Gerber object presence is mandatory for this rule but it is not "
"selected."

#: flatcamTools/ToolRulesCheck.py:1220 flatcamTools/ToolRulesCheck.py:1247
msgid "Silk to Silk clearance"
msgstr "Silk to Silk clearance"

#: flatcamTools/ToolRulesCheck.py:1233
msgid "TOP -> Silk to Silk clearance"
msgstr "TOP -> Silk to Silk clearance"

#: flatcamTools/ToolRulesCheck.py:1243
msgid "BOTTOM -> Silk to Silk clearance"
msgstr "BOTTOM -> Silk to Silk clearance"

#: flatcamTools/ToolRulesCheck.py:1299
msgid "One or more of the Gerber objects is not valid."
msgstr "One or more of the Gerber objects is not valid."

#: flatcamTools/ToolRulesCheck.py:1307
msgid "TOP -> Silk to Solder Mask Clearance"
msgstr "TOP -> Silk to Solder Mask Clearance"

#: flatcamTools/ToolRulesCheck.py:1313
msgid "BOTTOM -> Silk to Solder Mask Clearance"
msgstr "BOTTOM -> Silk to Solder Mask Clearance"

#: flatcamTools/ToolRulesCheck.py:1317
msgid ""
"Both Silk and Solder Mask Gerber objects has to be either both Top or both "
"Bottom."
msgstr ""
"Both Silk and Solder Mask Gerber objects has to be either both Top or both "
"Bottom."

#: flatcamTools/ToolRulesCheck.py:1353
msgid ""
"One of the Silk Gerber objects or the Outline Gerber object is not valid."
msgstr ""
"One of the Silk Gerber objects or the Outline Gerber object is not valid."

#: flatcamTools/ToolRulesCheck.py:1397
msgid "TOP -> Minimum Solder Mask Sliver"
msgstr "TOP -> Minimum Solder Mask Sliver"

#: flatcamTools/ToolRulesCheck.py:1407
msgid "BOTTOM -> Minimum Solder Mask Sliver"
msgstr "BOTTOM -> Minimum Solder Mask Sliver"

#: flatcamTools/ToolRulesCheck.py:1456
msgid "One of the Copper Gerber objects or the Excellon objects is not valid."
msgstr "One of the Copper Gerber objects or the Excellon objects is not valid."

#: flatcamTools/ToolRulesCheck.py:1472
msgid ""
"Excellon object presence is mandatory for this rule but none is selected."
msgstr ""
"Excellon object presence is mandatory for this rule but none is selected."

#: flatcamTools/ToolRulesCheck.py:1545 flatcamTools/ToolRulesCheck.py:1558
#: flatcamTools/ToolRulesCheck.py:1569 flatcamTools/ToolRulesCheck.py:1582
msgid "STATUS"
msgstr "STATUS"

#: flatcamTools/ToolRulesCheck.py:1548 flatcamTools/ToolRulesCheck.py:1572
msgid "FAILED"
msgstr "FAILED"

#: flatcamTools/ToolRulesCheck.py:1561 flatcamTools/ToolRulesCheck.py:1585
msgid "PASSED"
msgstr "PASSED"

#: flatcamTools/ToolRulesCheck.py:1562 flatcamTools/ToolRulesCheck.py:1586
msgid "Violations: There are no violations for the current rule."
msgstr "Violations: There are no violations for the current rule."

#: flatcamTools/ToolShell.py:70 flatcamTools/ToolShell.py:72
msgid "...proccessing..."
msgstr "...proccessing..."

#: flatcamTools/ToolSolderPaste.py:36
msgid "Solder Paste Tool"
msgstr "Solder Paste Tool"

#: flatcamTools/ToolSolderPaste.py:64
msgid "Gerber Solder paste object.                        "
msgstr "Gerber Solder paste object.                        "

#: flatcamTools/ToolSolderPaste.py:71
msgid ""
"Tools pool from which the algorithm\n"
"will pick the ones used for dispensing solder paste."
msgstr ""
"Tools pool from which the algorithm\n"
"will pick the ones used for dispensing solder paste."

#: flatcamTools/ToolSolderPaste.py:86
msgid ""
"This is the Tool Number.\n"
"The solder dispensing will start with the tool with the biggest \n"
"diameter, continuing until there are no more Nozzle tools.\n"
"If there are no longer tools but there are still pads not covered\n"
" with solder paste, the app will issue a warning message box."
msgstr ""
"This is the Tool Number.\n"
"The solder dispensing will start with the tool with the biggest \n"
"diameter, continuing until there are no more Nozzle tools.\n"
"If there are no longer tools but there are still pads not covered\n"
" with solder paste, the app will issue a warning message box."

#: flatcamTools/ToolSolderPaste.py:93
msgid ""
"Nozzle tool Diameter. It's value (in current FlatCAM units)\n"
"is the width of the solder paste dispensed."
msgstr ""
"Nozzle tool Diameter. It's value (in current FlatCAM units)\n"
"is the width of the solder paste dispensed."

#: flatcamTools/ToolSolderPaste.py:100
msgid "New Nozzle Tool"
msgstr "New Nozzle Tool"

#: flatcamTools/ToolSolderPaste.py:116
msgid ""
"Add a new nozzle tool to the Tool Table\n"
"with the diameter specified above."
msgstr ""
"Add a new nozzle tool to the Tool Table\n"
"with the diameter specified above."

#: flatcamTools/ToolSolderPaste.py:128
msgid "Generate solder paste dispensing geometry."
msgstr "Generate solder paste dispensing geometry."

#: flatcamTools/ToolSolderPaste.py:141
msgid "STEP 1"
msgstr "STEP 1"

#: flatcamTools/ToolSolderPaste.py:143
msgid ""
"First step is to select a number of nozzle tools for usage\n"
"and then optionally modify the GCode parameters bellow."
msgstr ""
"First step is to select a number of nozzle tools for usage\n"
"and then optionally modify the GCode parameters bellow."

#: flatcamTools/ToolSolderPaste.py:146
msgid ""
"Select tools.\n"
"Modify parameters."
msgstr ""
"Select tools.\n"
"Modify parameters."

#: flatcamTools/ToolSolderPaste.py:234
msgid ""
"Feedrate (speed) while moving up vertically\n"
" to Dispense position (on Z plane)."
msgstr ""
"Feedrate (speed) while moving up vertically\n"
" to Dispense position (on Z plane)."

#: flatcamTools/ToolSolderPaste.py:288
msgid "Generate GCode"
msgstr "Generate GCode"

#: flatcamTools/ToolSolderPaste.py:290
msgid ""
"Generate GCode for Solder Paste dispensing\n"
"on PCB pads."
msgstr ""
"Generate GCode for Solder Paste dispensing\n"
"on PCB pads."

#: flatcamTools/ToolSolderPaste.py:305
msgid "STEP 2"
msgstr "STEP 2"

#: flatcamTools/ToolSolderPaste.py:307
msgid ""
"Second step is to create a solder paste dispensing\n"
"geometry out of an Solder Paste Mask Gerber file."
msgstr ""
"Second step is to create a solder paste dispensing\n"
"geometry out of an Solder Paste Mask Gerber file."

#: flatcamTools/ToolSolderPaste.py:323
msgid "Geo Result"
msgstr "Geo Result"

#: flatcamTools/ToolSolderPaste.py:325
msgid ""
"Geometry Solder Paste object.\n"
"The name of the object has to end in:\n"
"'_solderpaste' as a protection."
msgstr ""
"Geometry Solder Paste object.\n"
"The name of the object has to end in:\n"
"'_solderpaste' as a protection."

#: flatcamTools/ToolSolderPaste.py:334
msgid "STEP 3"
msgstr "STEP 3"

#: flatcamTools/ToolSolderPaste.py:336
msgid ""
"Third step is to select a solder paste dispensing geometry,\n"
"and then generate a CNCJob object.\n"
"\n"
"REMEMBER: if you want to create a CNCJob with new parameters,\n"
"first you need to generate a geometry with those new params,\n"
"and only after that you can generate an updated CNCJob."
msgstr ""
"Third step is to select a solder paste dispensing geometry,\n"
"and then generate a CNCJob object.\n"
"\n"
"REMEMBER: if you want to create a CNCJob with new parameters,\n"
"first you need to generate a geometry with those new params,\n"
"and only after that you can generate an updated CNCJob."

#: flatcamTools/ToolSolderPaste.py:356
msgid "CNC Result"
msgstr "CNC Result"

#: flatcamTools/ToolSolderPaste.py:358
msgid ""
"CNCJob Solder paste object.\n"
"In order to enable the GCode save section,\n"
"the name of the object has to end in:\n"
"'_solderpaste' as a protection."
msgstr ""
"CNCJob Solder paste object.\n"
"In order to enable the GCode save section,\n"
"the name of the object has to end in:\n"
"'_solderpaste' as a protection."

#: flatcamTools/ToolSolderPaste.py:368
msgid "View GCode"
msgstr "View GCode"

#: flatcamTools/ToolSolderPaste.py:370
msgid ""
"View the generated GCode for Solder Paste dispensing\n"
"on PCB pads."
msgstr ""
"View the generated GCode for Solder Paste dispensing\n"
"on PCB pads."

#: flatcamTools/ToolSolderPaste.py:374
msgid "Save GCode"
msgstr "Save GCode"

#: flatcamTools/ToolSolderPaste.py:376
msgid ""
"Save the generated GCode for Solder Paste dispensing\n"
"on PCB pads, to a file."
msgstr ""
"Save the generated GCode for Solder Paste dispensing\n"
"on PCB pads, to a file."

#: flatcamTools/ToolSolderPaste.py:380
msgid "STEP 4"
msgstr "STEP 4"

#: flatcamTools/ToolSolderPaste.py:382
msgid ""
"Fourth step (and last) is to select a CNCJob made from \n"
"a solder paste dispensing geometry, and then view/save it's GCode."
msgstr ""
"Fourth step (and last) is to select a CNCJob made from \n"
"a solder paste dispensing geometry, and then view/save it's GCode."

#: flatcamTools/ToolSolderPaste.py:824
msgid "Adding Nozzle tool cancelled. Tool already in Tool Table."
msgstr "Adding Nozzle tool cancelled. Tool already in Tool Table."

#: flatcamTools/ToolSolderPaste.py:830
msgid "New Nozzle tool added to Tool Table."
msgstr "New Nozzle tool added to Tool Table."

#: flatcamTools/ToolSolderPaste.py:873
msgid "Nozzle tool from Tool Table was edited."
msgstr "Nozzle tool from Tool Table was edited."

#: flatcamTools/ToolSolderPaste.py:931
msgid "Delete failed. Select a Nozzle tool to delete."
msgstr "Delete failed. Select a Nozzle tool to delete."

#: flatcamTools/ToolSolderPaste.py:937
msgid "Nozzle tool(s) deleted from Tool Table."
msgstr "Nozzle tool(s) deleted from Tool Table."

#: flatcamTools/ToolSolderPaste.py:993
msgid "No SolderPaste mask Gerber object loaded."
msgstr "No SolderPaste mask Gerber object loaded."

#: flatcamTools/ToolSolderPaste.py:1011
msgid "Creating Solder Paste dispensing geometry."
msgstr "Creating Solder Paste dispensing geometry."

#: flatcamTools/ToolSolderPaste.py:1024
msgid "No Nozzle tools in the tool table."
msgstr "No Nozzle tools in the tool table."

#: flatcamTools/ToolSolderPaste.py:1151
msgid "Cancelled. Empty file, it has no geometry..."
msgstr "Cancelled. Empty file, it has no geometry..."

#: flatcamTools/ToolSolderPaste.py:1155
msgid "Solder Paste geometry generated successfully"
msgstr "Solder Paste geometry generated successfully"

#: flatcamTools/ToolSolderPaste.py:1162
msgid "Some or all pads have no solder due of inadequate nozzle diameters..."
msgstr "Some or all pads have no solder due of inadequate nozzle diameters..."

#: flatcamTools/ToolSolderPaste.py:1176
msgid "Generating Solder Paste dispensing geometry..."
msgstr "Generating Solder Paste dispensing geometry..."

#: flatcamTools/ToolSolderPaste.py:1197
msgid "There is no Geometry object available."
msgstr "There is no Geometry object available."

#: flatcamTools/ToolSolderPaste.py:1202
msgid "This Geometry can't be processed. NOT a solder_paste_tool geometry."
msgstr "This Geometry can't be processed. NOT a solder_paste_tool geometry."

#: flatcamTools/ToolSolderPaste.py:1310
msgid "ToolSolderPaste CNCjob created"
msgstr "ToolSolderPaste CNCjob created"

#: flatcamTools/ToolSolderPaste.py:1343 flatcamTools/ToolSolderPaste.py:1348
#: flatcamTools/ToolSolderPaste.py:1403
msgid ""
"This CNCJob object can't be processed. NOT a solder_paste_tool CNCJob object."
msgstr ""
"This CNCJob object can't be processed. NOT a solder_paste_tool CNCJob object."

#: flatcamTools/ToolSolderPaste.py:1373
msgid "No Gcode in the object"
msgstr "No Gcode in the object"

#: flatcamTools/ToolSolderPaste.py:1413
msgid "Export GCode ..."
msgstr "Export GCode ..."

#: flatcamTools/ToolSolderPaste.py:1461
msgid "Solder paste dispenser GCode file saved to"
msgstr "Solder paste dispenser GCode file saved to"

#: flatcamTools/ToolSub.py:56
msgid "Gerber Objects"
msgstr "Gerber Objects"

#: flatcamTools/ToolSub.py:65 flatcamTools/ToolSub.py:111
msgid "Target"
msgstr "Target"

#: flatcamTools/ToolSub.py:67
msgid ""
"Gerber object from which to substract\n"
"the substractor Gerber object."
msgstr ""
"Gerber object from which to substract\n"
"the substractor Gerber object."

#: flatcamTools/ToolSub.py:79 flatcamTools/ToolSub.py:125
msgid "Substractor"
msgstr "Substractor"

#: flatcamTools/ToolSub.py:81
msgid ""
"Gerber object that will be substracted\n"
"from the target Gerber object."
msgstr ""
"Gerber object that will be substracted\n"
"from the target Gerber object."

#: flatcamTools/ToolSub.py:88
msgid "Substract Gerber"
msgstr "Substract Gerber"

#: flatcamTools/ToolSub.py:90
msgid ""
"Will remove the area occupied by the substractor\n"
"Gerber from the Target Gerber.\n"
"Can be used to remove the overlapping silkscreen\n"
"over the soldermask."
msgstr ""
"Will remove the area occupied by the substractor\n"
"Gerber from the Target Gerber.\n"
"Can be used to remove the overlapping silkscreen\n"
"over the soldermask."

#: flatcamTools/ToolSub.py:102
msgid "Geometry Objects"
msgstr "Geometry Objects"

#: flatcamTools/ToolSub.py:113
msgid ""
"Geometry object from which to substract\n"
"the substractor Geometry object."
msgstr ""
"Geometry object from which to substract\n"
"the substractor Geometry object."

#: flatcamTools/ToolSub.py:127
msgid ""
"Geometry object that will be substracted\n"
"from the target Geometry object."
msgstr ""
"Geometry object that will be substracted\n"
"from the target Geometry object."

#: flatcamTools/ToolSub.py:138
msgid "Substract Geometry"
msgstr "Substract Geometry"

#: flatcamTools/ToolSub.py:140
msgid ""
"Will remove the area occupied by the substractor\n"
"Geometry from the Target Geometry."
msgstr ""
"Will remove the area occupied by the substractor\n"
"Geometry from the Target Geometry."

#: flatcamTools/ToolSub.py:227
msgid "Sub Tool"
msgstr "Sub Tool"

#: flatcamTools/ToolSub.py:244 flatcamTools/ToolSub.py:446
msgid "No Target object loaded."
msgstr "No Target object loaded."

#: flatcamTools/ToolSub.py:259 flatcamTools/ToolSub.py:461
msgid "No Substractor object loaded."
msgstr "No Substractor object loaded."

#: flatcamTools/ToolSub.py:313
msgid "Parsing geometry for aperture"
msgstr "Parsing geometry for aperture"

#: flatcamTools/ToolSub.py:415 flatcamTools/ToolSub.py:618
msgid "Generating new object ..."
msgstr "Generating new object ..."

#: flatcamTools/ToolSub.py:419 flatcamTools/ToolSub.py:622
#: flatcamTools/ToolSub.py:703
msgid "Generating new object failed."
msgstr "Generating new object failed."

#: flatcamTools/ToolSub.py:424 flatcamTools/ToolSub.py:628
msgid "Created"
msgstr "Created"

#: flatcamTools/ToolSub.py:475
msgid "Currently, the Substractor geometry cannot be of type Multigeo."
msgstr "Currently, the Substractor geometry cannot be of type Multigeo."

#: flatcamTools/ToolSub.py:520
msgid "Parsing solid_geometry ..."
msgstr "Parsing solid_geometry ..."

#: flatcamTools/ToolSub.py:522
msgid "Parsing solid_geometry for tool"
msgstr "Parsing solid_geometry for tool"

#: flatcamTools/ToolTransform.py:22
msgid "Object Transform"
msgstr "Object Transform"

#: flatcamTools/ToolTransform.py:79
msgid ""
"Rotate the selected object(s).\n"
"The point of reference is the middle of\n"
"the bounding box for all selected objects."
msgstr ""
"Rotate the selected object(s).\n"
"The point of reference is the middle of\n"
"the bounding box for all selected objects."

#: flatcamTools/ToolTransform.py:97 flatcamTools/ToolTransform.py:119
msgid ""
"Angle for Skew action, in degrees.\n"
"Float number between -360 and 360."
msgstr ""
"Angle for Skew action, in degrees.\n"
"Float number between -360 and 360."

#: flatcamTools/ToolTransform.py:108 flatcamTools/ToolTransform.py:130
msgid ""
"Skew/shear the selected object(s).\n"
"The point of reference is the middle of\n"
"the bounding box for all selected objects."
msgstr ""
"Skew/shear the selected object(s).\n"
"The point of reference is the middle of\n"
"the bounding box for all selected objects."

#: flatcamTools/ToolTransform.py:157 flatcamTools/ToolTransform.py:178
msgid ""
"Scale the selected object(s).\n"
"The point of reference depends on \n"
"the Scale reference checkbox state."
msgstr ""
"Scale the selected object(s).\n"
"The point of reference depends on \n"
"the Scale reference checkbox state."

#: flatcamTools/ToolTransform.py:226 flatcamTools/ToolTransform.py:247
msgid ""
"Offset the selected object(s).\n"
"The point of reference is the middle of\n"
"the bounding box for all selected objects.\n"
msgstr ""
"Offset the selected object(s).\n"
"The point of reference is the middle of\n"
"the bounding box for all selected objects.\n"

#: flatcamTools/ToolTransform.py:265 flatcamTools/ToolTransform.py:271
msgid "Flip the selected object(s) over the X axis."
msgstr "Flip the selected object(s) over the X axis."

#: flatcamTools/ToolTransform.py:296
msgid "Ref. Point"
msgstr "Ref. Point"

#: flatcamTools/ToolTransform.py:435
msgid "Rotate transformation can not be done for a value of 0."
msgstr "Rotate transformation can not be done for a value of 0."

#: flatcamTools/ToolTransform.py:474 flatcamTools/ToolTransform.py:497
msgid "Scale transformation can not be done for a factor of 0 or 1."
msgstr "Scale transformation can not be done for a factor of 0 or 1."

#: flatcamTools/ToolTransform.py:513 flatcamTools/ToolTransform.py:524
msgid "Offset transformation can not be done for a value of 0."
msgstr "Offset transformation can not be done for a value of 0."

#: flatcamTools/ToolTransform.py:540
msgid "No object selected. Please Select an object to rotate!"
msgstr "No object selected. Please Select an object to rotate!"

#: flatcamTools/ToolTransform.py:568
msgid "CNCJob objects can't be rotated."
msgstr "CNCJob objects can't be rotated."

#: flatcamTools/ToolTransform.py:576
msgid "Rotate done"
msgstr "Rotate done"

#: flatcamTools/ToolTransform.py:581 flatcamTools/ToolTransform.py:656
#: flatcamTools/ToolTransform.py:711 flatcamTools/ToolTransform.py:770
#: flatcamTools/ToolTransform.py:806
msgid "Due of"
msgstr "Due of"

#: flatcamTools/ToolTransform.py:581 flatcamTools/ToolTransform.py:656
#: flatcamTools/ToolTransform.py:711 flatcamTools/ToolTransform.py:770
#: flatcamTools/ToolTransform.py:806
msgid "action was not executed."
msgstr "action was not executed."

#: flatcamTools/ToolTransform.py:593
msgid "No object selected. Please Select an object to flip"
msgstr "No object selected. Please Select an object to flip"

#: flatcamTools/ToolTransform.py:628
msgid "CNCJob objects can't be mirrored/flipped."
msgstr "CNCJob objects can't be mirrored/flipped."

#: flatcamTools/ToolTransform.py:666
msgid "Skew transformation can not be done for 0, 90 and 180 degrees."
msgstr "Skew transformation can not be done for 0, 90 and 180 degrees."

#: flatcamTools/ToolTransform.py:671
msgid "No object selected. Please Select an object to shear/skew!"
msgstr "No object selected. Please Select an object to shear/skew!"

#: flatcamTools/ToolTransform.py:693
msgid "CNCJob objects can't be skewed."
msgstr "CNCJob objects can't be skewed."

#: flatcamTools/ToolTransform.py:706
msgid "Skew on the"
msgstr "Skew on the"

#: flatcamTools/ToolTransform.py:706 flatcamTools/ToolTransform.py:766
#: flatcamTools/ToolTransform.py:801
msgid "axis done"
msgstr "axis done"

#: flatcamTools/ToolTransform.py:723
msgid "No object selected. Please Select an object to scale!"
msgstr "No object selected. Please Select an object to scale!"

#: flatcamTools/ToolTransform.py:756
msgid "CNCJob objects can't be scaled."
msgstr "CNCJob objects can't be scaled."

#: flatcamTools/ToolTransform.py:766
msgid "Scale on the"
msgstr "Scale on the"

#: flatcamTools/ToolTransform.py:778
msgid "No object selected. Please Select an object to offset!"
msgstr "No object selected. Please Select an object to offset!"

#: flatcamTools/ToolTransform.py:787
msgid "CNCJob objects can't be offset."
msgstr "CNCJob objects can't be offset."

#: flatcamTools/ToolTransform.py:801
msgid "Offset on the"
msgstr "Offset on the"

#: tclCommands/TclCommandBbox.py:70 tclCommands/TclCommandNregions.py:68
msgid "Expected FlatCAMGerber or FlatCAMGeometry, got"
msgstr "Expected FlatCAMGerber or FlatCAMGeometry, got"

#: tclCommands/TclCommandBounds.py:64 tclCommands/TclCommandBounds.py:68
msgid "Expected a list of objects names separated by comma. Got"
msgstr "Expected a list of objects names separated by comma. Got"

#: tclCommands/TclCommandBounds.py:79
msgid "TclCommand Bounds done."
msgstr "TclCommand Bounds done."

#: tclCommands/TclCommandCopperClear.py:237 tclCommands/TclCommandPaint.py:235
msgid "Expected -box <value>."
msgstr "Expected -box <value>."

#: tclCommands/TclCommandCopperClear.py:246 tclCommands/TclCommandPaint.py:244
#: tclCommands/TclCommandScale.py:63
msgid "Could not retrieve box object"
msgstr "Could not retrieve box object"

#: tclCommands/TclCommandCopperClear.py:268
msgid ""
"None of the following args: 'ref', 'all' were found or none was set to 1.\n"
"Copper clearing failed."
msgstr ""
"None of the following args: 'ref', 'all' were found or none was set to 1.\n"
"Copper clearing failed."

#: tclCommands/TclCommandPaint.py:212
msgid "Expected -x <value> and -y <value>."
msgstr "Expected -x <value> and -y <value>."

#: tclCommands/TclCommandPaint.py:263
msgid ""
"There was none of the following args: 'ref', 'single', 'all'.\n"
"Paint failed."
msgstr ""
"There was none of the following args: 'ref', 'single', 'all'.\n"
"Paint failed."

#: tclCommands/TclCommandScale.py:83
msgid "Expected -origin <origin> or -origin <min_bounds> or -origin <center>."
msgstr "Expected -origin <origin> or -origin <min_bounds> or -origin <center>."

#: tclCommands/TclCommandScale.py:92
msgid "Expected -x <value> -y <value>."
msgstr "Expected -x <value> -y <value>."

#: tclCommands/TclCommandSetOrigin.py:87
msgid "Expected a pair of (x, y) coordinates. Got"
msgstr "Expected a pair of (x, y) coordinates. Got"

#: tclCommands/TclCommandSetOrigin.py:94
msgid "Origin set by offsetting all loaded objects with "
msgstr "Origin set by offsetting all loaded objects with "

#: tclCommands/TclCommandSubtractRectangle.py:49
msgid "No Geometry name in args. Provide a name and try again."
msgstr "No Geometry name in args. Provide a name and try again."

#~ msgid "Could not load factory defaults file."
#~ msgstr "Could not load factory defaults file."

#~ msgid "Failed to parse factory defaults file."
#~ msgstr "Failed to parse factory defaults file."

#~ msgid "Failed to write factory defaults to file."
#~ msgstr "Failed to write factory defaults to file."

#~ msgid "Factory defaults saved."
#~ msgstr "Factory defaults saved."

#~ msgid "&Help"
#~ msgstr "&Help"

#~ msgid "FlatCAM.org"
#~ msgstr "FlatCAM.org"

#~ msgid "tool = tool number"
#~ msgstr "tool = tool number"

#~ msgid "tooldia = tool diameter"
#~ msgstr "tooldia = tool diameter"

#~ msgid "t_drills = for Excellon, total number of drills"
#~ msgstr "t_drills = for Excellon, total number of drills"

#~ msgid "x_toolchange = X coord for Toolchange"
#~ msgstr "x_toolchange = X coord for Toolchange"

#~ msgid "z_toolchange = Z coord for Toolchange"
#~ msgstr "z_toolchange = Z coord for Toolchange"

#~ msgid "z_depthpercut = the step value for multidepth cut"
#~ msgstr "z_depthpercut = the step value for multidepth cut"

#~ msgid "spindlesspeed = the value for the spindle speed"
#~ msgstr "spindlesspeed = the value for the spindle speed"

#~ msgid "White"
#~ msgstr "White"

#~ msgid "Rotate Angle"
#~ msgstr "Rotate Angle"

#~ msgid "Skew_X angle"
#~ msgstr "Skew_X angle"

#~ msgid "Skew_Y angle"
#~ msgstr "Skew_Y angle"

#~ msgid "Scale_X factor"
#~ msgstr "Scale_X factor"

#~ msgid "Scale_Y factor"
#~ msgstr "Scale_Y factor"

#~ msgid "Offset_X val"
#~ msgstr "Offset_X val"

#~ msgid "Offset_Y val"
#~ msgstr "Offset_Y val"

#~ msgid " Mirror Ref. Point"
#~ msgstr " Mirror Ref. Point"

#~ msgid "Object(s) not selected"
#~ msgstr "Object(s) not selected"

#~ msgid "The Gerber Copper Bottom file for which rules are checked."
#~ msgstr "The Gerber Copper Bottom file for which rules are checked."

#~ msgid "The Gerber Silkscreen Bottom file for which rules are checked."
#~ msgstr "The Gerber Silkscreen Bottom file for which rules are checked."

#~| msgid "Excellon file"
#~ msgid "Excellon Files"
#~ msgstr "Excellon Files"

#~ msgid "Go"
#~ msgstr "Go"

#~ msgid "There are no polygons to mark area."
#~ msgstr "There are no polygons to mark area."

#~ msgid "&Edit"
#~ msgstr "&Edit"

#~ msgid "&Options"
#~ msgstr "&Options"

#~ msgid "Measurement Tool"
#~ msgstr "Measurement Tool"

#~ msgid "Margin value is missing or wrong format. Add it and retry."
#~ msgstr "Margin value is missing or wrong format. Add it and retry."

#~ msgid "Gap size value is missing or wrong format. Add it and retry."
#~ msgstr "Gap size value is missing or wrong format. Add it and retry."

#~ msgid "Measurement"
#~ msgstr "Measurement"

#~ msgid "Meas. Tool"
#~ msgstr "Meas. Tool"

#~ msgid "Not available with the current Graphic Engine Legacy(2D)."
#~ msgstr "Not available with the current Graphic Engine Legacy(2D)."

#~ msgid "ToolMove.on_left_click()"
#~ msgstr "ToolMove.on_left_click()"

#~ msgid "on_paint_button_click"
#~ msgstr "on_paint_button_click"

#~ msgid "PaintTool.paint_poly()"
#~ msgstr "PaintTool.paint_poly()"

#~ msgid "ToolSolderPaste.on_view_gcode()"
#~ msgstr "ToolSolderPaste.on_view_gcode()"

#~ msgid "App.on_fileopenscript() -->"
#~ msgstr "App.on_fileopenscript() -->"

#~ msgid "<span style=\"color:green;\"><b>%s</b></span>"
#~ msgstr "<span style=\"color:green;\"><b>%s</b></span>"

#~ msgid "<span style=\"color:red;\"><b>%s</b></span>"
#~ msgstr "<span style=\"color:red;\"><b>%s</b></span>"

#~ msgid "FlatCAMObj.FlatCAMGeometry.mtool_gen_cncjob() -->"
#~ msgstr "FlatCAMObj.FlatCAMGeometry.mtool_gen_cncjob() -->"

#~ msgid "FlatCAMCNNJob.on_edit_code_click() -->"
#~ msgstr "FlatCAMCNNJob.on_edit_code_click() -->"

#~ msgid ""
#~ "toolbars, key shortcuts or even dragging and dropping the files on the GUI"
#~ msgstr ""
#~ "toolbars, key shortcuts or even dragging and dropping the files on the GUI"

#~ msgid ""
#~ "You can also load a FlatCAM project by double clicking on the project "
#~ "file, drag"
#~ msgstr ""
#~ "You can also load a FlatCAM project by double clicking on the project "
#~ "file, drag"

#~ msgid ""
#~ "Once an object is available in the Project Tab, by selecting it and then "
#~ "focusing on"
#~ msgstr ""
#~ "Once an object is available in the Project Tab, by selecting it and then "
#~ "focusing on"

#~ msgid "SELECTED TAB"
#~ msgstr "SELECTED TAB"

#~ msgid "more simpler is to double click the object name in the Project Tab"
#~ msgstr "more simpler is to double click the object name in the Project Tab"

#~ msgid "will be updated with the object properties according to"
#~ msgstr "will be updated with the object properties according to"

#~ msgid "kind: Gerber, Excellon, Geometry or CNCJob object"
#~ msgstr "kind: Gerber, Excellon, Geometry or CNCJob object"

#~ msgid ""
#~ "If the selection of the object is done on the canvas by single click "
#~ "instead, and the"
#~ msgstr ""
#~ "If the selection of the object is done on the canvas by single click "
#~ "instead, and the"

#~ msgid "and populate it even if it was out of focus"
#~ msgstr "and populate it even if it was out of focus"

#~ msgid "Gerber/Excellon Object"
#~ msgstr "Gerber/Excellon Object"

#~ msgid "Change Parameter"
#~ msgstr "Change Parameter"

#~ msgid "Add tools (change param in Selected Tab)"
#~ msgstr "Add tools (change param in Selected Tab)"

#~ msgid "Generate CNCJob"
#~ msgstr "Generate CNCJob"

#~ msgid "CNCJob Object"
#~ msgstr "CNCJob Object"

#~ msgid ""
#~ "Verify GCode (through Edit CNC Code) and/or append/prepend to GCode "
#~ "(again, done in"
#~ msgstr ""
#~ "Verify GCode (through Edit CNC Code) and/or append/prepend to GCode "
#~ "(again, done in"

#~ msgid "Shortcuts List"
#~ msgstr "Shortcuts List"

#~ msgid "or through"
#~ msgstr "or through"

#~ msgid "own key shortcut"
#~ msgstr "own key shortcut"

#~ msgid "polygons"
#~ msgstr "polygons"

#~ msgid "geo"
#~ msgstr "geo"

#~ msgid "Start"
#~ msgstr "Start"

#~ msgid "Stop"
#~ msgstr "Stop"

#~ msgid "Generating panel ..."
#~ msgstr "Generating panel ..."

#~ msgid "Spawning copies"
#~ msgstr "Spawning copies"

#~ msgid "Parsing tool"
#~ msgstr "Parsing tool"

#~ msgid ""
#~ " Wrong value format for self.defaults[\"feedrate_probe\"] or self."
#~ "options[\"feedrate_probe\"]"
#~ msgstr ""
#~ " Wrong value format for self.defaults[\"feedrate_probe\"] or self."
#~ "options[\"feedrate_probe\"]"

#~ msgid "Wrong optimization type selected."
#~ msgstr "Wrong optimization type selected."

#~ msgid "FILE ASSOCIATIONS"
#~ msgstr "FILE ASSOCIATIONS"

#~ msgid "Advanced Param."
#~ msgstr "Advanced Param."

#~ msgid "MH"
#~ msgstr "MH"

#~ msgid "Feedrate (Plunge)"
#~ msgstr "Feedrate (Plunge)"

#~ msgid ""
#~ "Parameters used to create a CNC Job object\n"
#~ "for this drill object that are shown when App Level is Advanced."
#~ msgstr ""
#~ "Parameters used to create a CNC Job object\n"
#~ "for this drill object that are shown when App Level is Advanced."

#~ msgid ""
#~ "Parameters to create a CNC Job object\n"
#~ "tracing the contours of a Geometry object."
#~ msgstr ""
#~ "Parameters to create a CNC Job object\n"
#~ "tracing the contours of a Geometry object."

#~ msgid "Manufacturing"
#~ msgstr "Manufacturing"

#~ msgid "Function"
#~ msgstr "Function"

#~ msgid ""
#~ "Juan Pablo Caram <BR><BR>Denis Hayrullin<BR>Kamil Sopko<BR>Marius "
#~ "Stanciu<BR>Matthieu Berthomé<BR><Br>and many others found <a href = "
#~ "\"https://bitbucket.org/jpcgt/flatcam/pull-requests/?state=MERGED\">here."
#~ "</a><BR><BR>"
#~ msgstr ""
#~ "Juan Pablo Caram <BR><BR>Denis Hayrullin<BR>Kamil Sopko<BR>Marius "
#~ "Stanciu<BR>Matthieu Berthomé<BR><Br>and many others found <a href = "
#~ "\"https://bitbucket.org/jpcgt/flatcam/pull-requests/?state=MERGED\">here."
#~ "</a><BR><BR>"

#~ msgid ""
#~ "\n"
#~ "<p><span style=\"font-size:{tsize}px\"><strong>Selected Tab - Choose an "
#~ "Item from Project Tab</strong></span></p>\n"
#~ "\n"
#~ "<p><span style=\"font-size:{fsize}px\"><strong>Details</strong>:<br />\n"
#~ "The normal flow when working in FlatCAM is the following:</span></p>\n"
#~ "\n"
#~ "<ol>\n"
#~ "\t<li><span style=\"font-size:{fsize}px\">Loat/Import a Gerber, Excellon, "
#~ "Gcode, DXF, Raster Image or SVG file into FlatCAM using either the "
#~ "menu&#39;s, toolbars, key shortcuts or even dragging and dropping the "
#~ "files on the GUI.<br />\n"
#~ "\t<br />\n"
#~ "\tYou can also load a <strong>FlatCAM project</strong> by double clicking "
#~ "on the project file, drag &amp; drop of the file into the FLATCAM GUI or "
#~ "through the menu/toolbar links offered within the app.</span><br />\n"
#~ "\t&nbsp;</li>\n"
#~ "\t<li><span style=\"font-size:{fsize}px\">Once an object is available in "
#~ "the Project Tab, by selecting it and then focusing on <strong>SELECTED "
#~ "TAB </strong>(more simpler is to double click the object name in the "
#~ "Project Tab), <strong>SELECTED TAB </strong>will be updated with the "
#~ "object properties according to it&#39;s kind: Gerber, Excellon, Geometry "
#~ "or CNCJob object.<br />\n"
#~ "\t<br />\n"
#~ "\tIf the selection of the object is done on the canvas by single click "
#~ "instead, and the <strong>SELECTED TAB</strong> is in focus, again the "
#~ "object properties will be displayed into the Selected Tab. Alternatively, "
#~ "double clicking on the object on the canvas will bring the "
#~ "<strong>SELECTED TAB</strong> and populate it even if it was out of focus."
#~ "<br />\n"
#~ "\t<br />\n"
#~ "\tYou can change the parameters in this screen and the flow direction is "
#~ "like this:<br />\n"
#~ "\t<br />\n"
#~ "\t<strong>Gerber/Excellon Object</strong> -&gt; Change Param -&gt; "
#~ "Generate Geometry -&gt;<strong> Geometry Object </strong>-&gt; Add tools "
#~ "(change param in Selected Tab) -&gt; Generate CNCJob -&gt;<strong> CNCJob "
#~ "Object </strong>-&gt; Verify GCode (through Edit CNC Code) and/or append/"
#~ "prepend to GCode (again, done in <strong>SELECTED TAB)&nbsp;</strong>-"
#~ "&gt; Save GCode</span></li>\n"
#~ "</ol>\n"
#~ "\n"
#~ "<p><span style=\"font-size:{fsize}px\">A list of key shortcuts is "
#~ "available through an menu entry in <strong>Help -&gt; Shortcuts List</"
#~ "strong>&nbsp;or through it&#39;s own key shortcut: <strong>F3</strong>.</"
#~ "span></p>\n"
#~ "\n"
#~ "        "
#~ msgstr ""
#~ "\n"
#~ "<p><span style=\"font-size:{tsize}px\"><strong>Selected Tab - Choose an "
#~ "Item from Project Tab</strong></span></p>\n"
#~ "\n"
#~ "<p><span style=\"font-size:{fsize}px\"><strong>Details</strong>:<br />\n"
#~ "The normal flow when working in FlatCAM is the following:</span></p>\n"
#~ "\n"
#~ "<ol>\n"
#~ "\t<li><span style=\"font-size:{fsize}px\">Loat/Import a Gerber, Excellon, "
#~ "Gcode, DXF, Raster Image or SVG file into FlatCAM using either the "
#~ "menu&#39;s, toolbars, key shortcuts or even dragging and dropping the "
#~ "files on the GUI.<br />\n"
#~ "\t<br />\n"
#~ "\tYou can also load a <strong>FlatCAM project</strong> by double clicking "
#~ "on the project file, drag &amp; drop of the file into the FLATCAM GUI or "
#~ "through the menu/toolbar links offered within the app.</span><br />\n"
#~ "\t&nbsp;</li>\n"
#~ "\t<li><span style=\"font-size:{fsize}px\">Once an object is available in "
#~ "the Project Tab, by selecting it and then focusing on <strong>SELECTED "
#~ "TAB </strong>(more simpler is to double click the object name in the "
#~ "Project Tab), <strong>SELECTED TAB </strong>will be updated with the "
#~ "object properties according to it&#39;s kind: Gerber, Excellon, Geometry "
#~ "or CNCJob object.<br />\n"
#~ "\t<br />\n"
#~ "\tIf the selection of the object is done on the canvas by single click "
#~ "instead, and the <strong>SELECTED TAB</strong> is in focus, again the "
#~ "object properties will be displayed into the Selected Tab. Alternatively, "
#~ "double clicking on the object on the canvas will bring the "
#~ "<strong>SELECTED TAB</strong> and populate it even if it was out of focus."
#~ "<br />\n"
#~ "\t<br />\n"
#~ "\tYou can change the parameters in this screen and the flow direction is "
#~ "like this:<br />\n"
#~ "\t<br />\n"
#~ "\t<strong>Gerber/Excellon Object</strong> -&gt; Change Param -&gt; "
#~ "Generate Geometry -&gt;<strong> Geometry Object </strong>-&gt; Add tools "
#~ "(change param in Selected Tab) -&gt; Generate CNCJob -&gt;<strong> CNCJob "
#~ "Object </strong>-&gt; Verify GCode (through Edit CNC Code) and/or append/"
#~ "prepend to GCode (again, done in <strong>SELECTED TAB)&nbsp;</strong>-"
#~ "&gt; Save GCode</span></li>\n"
#~ "</ol>\n"
#~ "\n"
#~ "<p><span style=\"font-size:{fsize}px\">A list of key shortcuts is "
#~ "available through an menu entry in <strong>Help -&gt; Shortcuts List</"
#~ "strong>&nbsp;or through it&#39;s own key shortcut: <strong>F3</strong>.</"
#~ "span></p>\n"
#~ "\n"
#~ "        "

#~ msgid "Run Script ...\tSHIFT+S"
#~ msgstr "Run Script ...\tSHIFT+S"

#~| msgid ""
#~| "<font size=8><B>FlatCAM</B></font><BR>Version {version} {beta} ({date}) "
#~| "- {arch} <BR><BR>2D Computer-Aided Printed Circuit "
#~| "Board<BR>Manufacturing.<BR><BR>(c) 2014-2019 <B>Juan Pablo Caram</"
#~| "B><BR><BR><B> Main Contributors:</B><BR>Denis Hayrullin<BR>Kamil "
#~| "Sopko<BR>Marius Stanciu<BR>Matthieu Berthomé<BR>and many others found <a "
#~| "href = \"https://bitbucket.org/jpcgt/flatcam/pull-requests/?state=MERGED"
#~| "\">here.</a><BR><BR>Development is done <a href = \"https://bitbucket."
#~| "org/jpcgt/flatcam/src/Beta/\">here.</a><BR>DOWNLOAD area <a href = "
#~| "\"https://bitbucket.org/jpcgt/flatcam/downloads/\">here.</a><BR>"
#~ msgid ""
#~ "<font size=8><B>FlatCAM</B></font><BR>Version {version} {beta} ({date}) - "
#~ "{arch} <BR><BR>2D Computer-Aided Printed Circuit Board<BR>Manufacturing."
#~ "<BR><BR><B> License: </B><BR>Licensed under MIT license (2014 - "
#~ "2019)<BR>by (c)Juan Pablo Caram <BR><BR><B> Programmers:</B><BR>Denis "
#~ "Hayrullin<BR>Kamil Sopko<BR>Marius Stanciu<BR>Matthieu Berthomé<BR>and "
#~ "many others found <a href = \"https://bitbucket.org/jpcgt/flatcam/pull-"
#~ "requests/?state=MERGED\">here.</a><BR><BR><B>Development</B> is done <a "
#~ "href = \"https://bitbucket.org/jpcgt/flatcam/src/Beta/\">here.</"
#~ "a><BR><b>DOWNLOAD</B> area <a href = \"https://bitbucket.org/jpcgt/"
#~ "flatcam/downloads/\">here.</a><BR>"
#~ msgstr ""
#~ "<font size=8><B>FlatCAM</B></font><BR>Version {version} {beta} ({date}) - "
#~ "{arch} <BR><BR>2D Computer-Aided Printed Circuit Board<BR>Manufacturing."
#~ "<BR><BR><B> License: </B><BR>Licensed under MIT license (2014 - "
#~ "2019)<BR>by (c)Juan Pablo Caram <BR><BR><B> Programmers:</B><BR>Denis "
#~ "Hayrullin<BR>Kamil Sopko<BR>Marius Stanciu<BR>Matthieu Berthomé<BR>and "
#~ "many others found <a href = \"https://bitbucket.org/jpcgt/flatcam/pull-"
#~ "requests/?state=MERGED\">here.</a><BR><BR><B>Development</B> is done <a "
#~ "href = \"https://bitbucket.org/jpcgt/flatcam/src/Beta/\">here.</"
#~ "a><BR><b>DOWNLOAD</B> area <a href = \"https://bitbucket.org/jpcgt/"
#~ "flatcam/downloads/\">here.</a><BR>"

#~| msgid "[ERROR_NOTCL] Expected a FlatCAMGeometry, got %s"
#~ msgid "Expected a FlatCAMGeometry, got %s"
#~ msgstr "Expected a FlatCAMGeometry, got %s"

#~ msgid "Saved to: %s"
#~ msgstr "Saved to: %s"

#~ msgid "[WARNING_NOTCL] Adding Tool cancelled ..."
#~ msgstr "[WARNING_NOTCL] Adding Tool cancelled ..."

#~ msgid "%s"
#~ msgstr "%s"

#~| msgid "[ERROR]App.on_view_source() -->%s"
#~ msgid "App.on_view_source() -->"
#~ msgstr "App.on_view_source() -->"

#~ msgid "[success] Name changed from {old} to {new}"
#~ msgstr "[success] Name changed from {old} to {new}"

#~| msgid ""
#~| "[ERROR_NOTCL] Failed.\n"
#~| "%s"
#~ msgid "[ERROR_NOTCL] %s"
#~ msgstr "[ERROR_NOTCL] %s"

#~ msgid "Editor %s"
#~ msgstr "Editor %s"

#~ msgid "[success] Done. Path completed."
#~ msgstr "[success] Done. Path completed."

#~ msgid "[success] Paint done."
#~ msgstr "[success] Paint done."

#~ msgid "About"
#~ msgstr "About"

#~| msgid ""
#~| "<b>General Shortcut list</b><br>\n"
#~| "            <table border=\"0\" cellpadding=\"0\" cellspacing=\"0\" "
#~| "style=\"width:283px\">\n"
#~| "                <tbody>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\" width=\"89\"><strong>F3</"
#~| "strong></td>\n"
#~| "                        <td width=\"194\"><span style=\"color:"
#~| "#006400\"><strong>&nbsp;SHOW SHORTCUT LIST</strong></span></td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\">&nbsp;</td>\n"
#~| "                        <td>&nbsp;</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>1</strong></td>\n"
#~| "                        <td>&nbsp;Switch to Project Tab</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>2</strong></td>\n"
#~| "                        <td>&nbsp;Switch to Selected Tab</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>3</strong></td>\n"
#~| "                        <td>&nbsp;Switch to Tool Tab</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\">&nbsp;</td>\n"
#~| "                        <td>&nbsp;</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>B</strong></td>\n"
#~| "                        <td>&nbsp;New Gerber</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>E</strong></td>\n"
#~| "                        <td>&nbsp;Edit Object (if selected)</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>G</strong></td>\n"
#~| "                        <td>&nbsp;Grid On/Off</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>J</strong></td>\n"
#~| "                        <td>&nbsp;Jump to Coordinates</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>L</strong></td>\n"
#~| "                        <td>&nbsp;New Excellon</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>M</strong></td>\n"
#~| "                        <td>&nbsp;Move Obj</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>N</strong></td>\n"
#~| "                        <td>&nbsp;New Geometry</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>O</strong></td>\n"
#~| "                        <td>&nbsp;Set Origin</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>Q</strong></td>\n"
#~| "                        <td>&nbsp;Change Units</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>P</strong></td>\n"
#~| "                        <td>&nbsp;Open Properties Tool</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>R</strong></td>\n"
#~| "                        <td>&nbsp;Rotate by 90 degree CW</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>S</strong></td>\n"
#~| "                        <td>&nbsp;Shell Toggle</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>T</strong></td>\n"
#~| "                        <td>&nbsp;Add a Tool (when in Geometry Selected "
#~| "Tab or in Tools NCC or Tools Paint)</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>V</strong></td>\n"
#~| "                        <td>&nbsp;Zoom Fit</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>X</strong></td>\n"
#~| "                        <td>&nbsp;Flip on X_axis</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>Y</strong></td>\n"
#~| "                        <td>&nbsp;Flip on Y_axis</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>&#39;-&#39;</strong></"
#~| "td>\n"
#~| "                        <td>&nbsp;Zoom Out</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>&#39;=&#39;</strong></"
#~| "td>\n"
#~| "                        <td>&nbsp;Zoom In</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\">&nbsp;</td>\n"
#~| "                        <td>&nbsp;</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>CTRL+A</strong></td>\n"
#~| "                        <td>&nbsp;Select All</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>CTRL+C</strong></td>\n"
#~| "                        <td>&nbsp;Copy Obj</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>CTRL+E</strong></td>\n"
#~| "                        <td>&nbsp;Open Excellon File</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>CTRL+G</strong></td>\n"
#~| "                        <td>&nbsp;Open Gerber File</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>CTRL+N</strong></td>\n"
#~| "                        <td>&nbsp;New Project</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>CTRL+M</strong></td>\n"
#~| "                        <td>&nbsp;Measurement Tool</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>CTRL+O</strong></td>\n"
#~| "                        <td>&nbsp;Open Project</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>CTRL+S</strong></td>\n"
#~| "                        <td>&nbsp;Save Project As</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>CTRL+F10</strong></"
#~| "td>\n"
#~| "                        <td>&nbsp;Toggle Plot Area</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\">&nbsp;</td>\n"
#~| "                        <td>&nbsp;</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>SHIFT+C</strong></td>\n"
#~| "                        <td>&nbsp;Copy Obj_Name</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>SHIFT+E</strong></td>\n"
#~| "                        <td>&nbsp;Toggle Code Editor</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>SHIFT+G</strong></td>\n"
#~| "                        <td>&nbsp;Toggle the axis</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>SHIFT+P</strong></td>\n"
#~| "                        <td>&nbsp;Open Preferences Window</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>SHIFT+R</strong></td>\n"
#~| "                        <td>&nbsp;Rotate by 90 degree CCW</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>SHIFT+S</strong></td>\n"
#~| "                        <td>&nbsp;Run a Script</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>SHIFT+W</strong></td>\n"
#~| "                        <td>&nbsp;Toggle the workspace</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>SHIFT+X</strong></td>\n"
#~| "                        <td>&nbsp;Skew on X axis</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>SHIFT+Y</strong></td>\n"
#~| "                        <td>&nbsp;Skew on Y axis</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\">&nbsp;</td>\n"
#~| "                        <td>&nbsp;</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>ALT+C</strong></td>\n"
#~| "                        <td>&nbsp;Calculators Tool</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>ALT+D</strong></td>\n"
#~| "                        <td>&nbsp;2-Sided PCB Tool</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>ALT+K</strong></td>\n"
#~| "                        <td>&nbsp;Solder Paste Dispensing Tool</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>ALT+L</strong></td>\n"
#~| "                        <td>&nbsp;Film PCB Tool</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>ALT+N</strong></td>\n"
#~| "                        <td>&nbsp;Non-Copper Clearing Tool</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>ALT+P</strong></td>\n"
#~| "                        <td>&nbsp;Paint Area Tool</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>ALT+Q</strong></td>\n"
#~| "                        <td>&nbsp;PDF Import Tool</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>ALT+R</strong></td>\n"
#~| "                        <td>&nbsp;Transformations Tool</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>ALT+S</strong></td>\n"
#~| "                        <td>&nbsp;View File Source</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>ALT+U</strong></td>\n"
#~| "                        <td>&nbsp;Cutout PCB Tool</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>ALT+1</strong></td>\n"
#~| "                        <td>&nbsp;Enable all Plots</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>ALT+2</strong></td>\n"
#~| "                        <td>&nbsp;Disable all Plots</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>ALT+3</strong></td>\n"
#~| "                        <td>&nbsp;Disable Non-selected Plots</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>ALT+F10</strong></td>\n"
#~| "                        <td>&nbsp;Toggle Full Screen</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\">&nbsp;</td>\n"
#~| "                        <td>&nbsp;</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>F1</strong></td>\n"
#~| "                        <td>&nbsp;Open Online Manual</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>F4</strong></td>\n"
#~| "                        <td>&nbsp;Open Online Tutorials</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>Del</strong></td>\n"
#~| "                        <td>&nbsp;Delete Object</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>Del</strong></td>\n"
#~| "                        <td>&nbsp;Alternate: Delete Tool</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>'`'</strong></td>\n"
#~| "                        <td>&nbsp;(left to Key_1)Toogle Notebook Area "
#~| "(Left Side)</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>SPACE</strong></td>\n"
#~| "                        <td>&nbsp;En(Dis)able Obj Plot</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>Escape</strong></td>\n"
#~| "                        <td>&nbsp;Deselects all objects</td>\n"
#~| "                    </tr>\n"
#~| "                </tbody>\n"
#~| "            </table>\n"
#~| "    \n"
#~| "            "
#~ msgid ""
#~ "<b>General Shortcut list</b><br>\n"
#~ "            <table border=\"0\" cellpadding=\"0\" cellspacing=\"0\" style="
#~ "\"width:283px\">\n"
#~ "                <tbody>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\" width=\"89\"><strong>F3</"
#~ "strong></td>\n"
#~ "                        <td width=\"194\"><span style=\"color:"
#~ "#006400\"><strong>&nbsp;SHOW SHORTCUT LIST</strong></span></td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>1</strong></td>\n"
#~ "                        <td>&nbsp;Switch to Project Tab</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>2</strong></td>\n"
#~ "                        <td>&nbsp;Switch to Selected Tab</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>3</strong></td>\n"
#~ "                        <td>&nbsp;Switch to Tool Tab</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>B</strong></td>\n"
#~ "                        <td>&nbsp;New Gerber</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>E</strong></td>\n"
#~ "                        <td>&nbsp;Edit Object (if selected)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>G</strong></td>\n"
#~ "                        <td>&nbsp;Grid On/Off</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>J</strong></td>\n"
#~ "                        <td>&nbsp;Jump to Coordinates</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>L</strong></td>\n"
#~ "                        <td>&nbsp;New Excellon</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>M</strong></td>\n"
#~ "                        <td>&nbsp;Move Obj</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>N</strong></td>\n"
#~ "                        <td>&nbsp;New Geometry</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>O</strong></td>\n"
#~ "                        <td>&nbsp;Set Origin</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Q</strong></td>\n"
#~ "                        <td>&nbsp;Change Units</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>P</strong></td>\n"
#~ "                        <td>&nbsp;Open Properties Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>R</strong></td>\n"
#~ "                        <td>&nbsp;Rotate by 90 degree CW</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>S</strong></td>\n"
#~ "                        <td>&nbsp;Shell Toggle</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>T</strong></td>\n"
#~ "                        <td>&nbsp;Add a Tool (when in Geometry Selected "
#~ "Tab or in Tools NCC or Tools Paint)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>V</strong></td>\n"
#~ "                        <td>&nbsp;Zoom Fit</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>X</strong></td>\n"
#~ "                        <td>&nbsp;Flip on X_axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Y</strong></td>\n"
#~ "                        <td>&nbsp;Flip on Y_axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>&#39;-&#39;</strong></"
#~ "td>\n"
#~ "                        <td>&nbsp;Zoom Out</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>&#39;=&#39;</strong></"
#~ "td>\n"
#~ "                        <td>&nbsp;Zoom In</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>CTRL+A</strong></td>\n"
#~ "                        <td>&nbsp;Select All</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>CTRL+C</strong></td>\n"
#~ "                        <td>&nbsp;Copy Obj</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>CTRL+E</strong></td>\n"
#~ "                        <td>&nbsp;Open Excellon File</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>CTRL+G</strong></td>\n"
#~ "                        <td>&nbsp;Open Gerber File</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>CTRL+N</strong></td>\n"
#~ "                        <td>&nbsp;New Project</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>CTRL+M</strong></td>\n"
#~ "                        <td>&nbsp;Measurement Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>CTRL+O</strong></td>\n"
#~ "                        <td>&nbsp;Open Project</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>CTRL+S</strong></td>\n"
#~ "                        <td>&nbsp;Save Project As</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>CTRL+F10</strong></td>\n"
#~ "                        <td>&nbsp;Toggle Plot Area</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>SHIFT+C</strong></td>\n"
#~ "                        <td>&nbsp;Copy Obj_Name</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>SHIFT+E</strong></td>\n"
#~ "                        <td>&nbsp;Toggle Code Editor</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>SHIFT+G</strong></td>\n"
#~ "                        <td>&nbsp;Toggle the axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>SHIFT+P</strong></td>\n"
#~ "                        <td>&nbsp;Open Preferences Window</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>SHIFT+R</strong></td>\n"
#~ "                        <td>&nbsp;Rotate by 90 degree CCW</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>SHIFT+S</strong></td>\n"
#~ "                        <td>&nbsp;Run a Script</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>SHIFT+W</strong></td>\n"
#~ "                        <td>&nbsp;Toggle the workspace</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>SHIFT+X</strong></td>\n"
#~ "                        <td>&nbsp;Skew on X axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>SHIFT+Y</strong></td>\n"
#~ "                        <td>&nbsp;Skew on Y axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+C</strong></td>\n"
#~ "                        <td>&nbsp;Calculators Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+D</strong></td>\n"
#~ "                        <td>&nbsp;2-Sided PCB Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+K</strong></td>\n"
#~ "                        <td>&nbsp;Solder Paste Dispensing Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+L</strong></td>\n"
#~ "                        <td>&nbsp;Film PCB Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+N</strong></td>\n"
#~ "                        <td>&nbsp;Non-Copper Clearing Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+P</strong></td>\n"
#~ "                        <td>&nbsp;Paint Area Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+Q</strong></td>\n"
#~ "                        <td>&nbsp;PDF Import Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+R</strong></td>\n"
#~ "                        <td>&nbsp;Transformations Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+S</strong></td>\n"
#~ "                        <td>&nbsp;View File Source</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+U</strong></td>\n"
#~ "                        <td>&nbsp;Cutout PCB Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+1</strong></td>\n"
#~ "                        <td>&nbsp;Enable all Plots</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+2</strong></td>\n"
#~ "                        <td>&nbsp;Disable all Plots</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+3</strong></td>\n"
#~ "                        <td>&nbsp;Disable Non-selected Plots</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+F10</strong></td>\n"
#~ "                        <td>&nbsp;Toggle Full Screen</td>\n"
#~ "                    </tr>                 \n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>CTRL+ALT+X</strong></"
#~ "td>\n"
#~ "                        <td>&nbsp;Abort current task (gracefully)</td>\n"
#~ "                    </tr>                    \n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>F1</strong></td>\n"
#~ "                        <td>&nbsp;Open Online Manual</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>F4</strong></td>\n"
#~ "                        <td>&nbsp;Open Online Tutorials</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Del</strong></td>\n"
#~ "                        <td>&nbsp;Delete Object</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Del</strong></td>\n"
#~ "                        <td>&nbsp;Alternate: Delete Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>'`'</strong></td>\n"
#~ "                        <td>&nbsp;(left to Key_1)Toogle Notebook Area "
#~ "(Left Side)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>SPACE</strong></td>\n"
#~ "                        <td>&nbsp;En(Dis)able Obj Plot</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Escape</strong></td>\n"
#~ "                        <td>&nbsp;Deselects all objects</td>\n"
#~ "                    </tr>\n"
#~ "                </tbody>\n"
#~ "            </table>\n"
#~ "    \n"
#~ "            "
#~ msgstr ""
#~ "<b>General Shortcut list</b><br>\n"
#~ "            <table border=\"0\" cellpadding=\"0\" cellspacing=\"0\" style="
#~ "\"width:283px\">\n"
#~ "                <tbody>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\" width=\"89\"><strong>F3</"
#~ "strong></td>\n"
#~ "                        <td width=\"194\"><span style=\"color:"
#~ "#006400\"><strong>&nbsp;SHOW SHORTCUT LIST</strong></span></td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>1</strong></td>\n"
#~ "                        <td>&nbsp;Switch to Project Tab</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>2</strong></td>\n"
#~ "                        <td>&nbsp;Switch to Selected Tab</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>3</strong></td>\n"
#~ "                        <td>&nbsp;Switch to Tool Tab</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>B</strong></td>\n"
#~ "                        <td>&nbsp;New Gerber</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>E</strong></td>\n"
#~ "                        <td>&nbsp;Edit Object (if selected)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>G</strong></td>\n"
#~ "                        <td>&nbsp;Grid On/Off</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>J</strong></td>\n"
#~ "                        <td>&nbsp;Jump to Coordinates</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>L</strong></td>\n"
#~ "                        <td>&nbsp;New Excellon</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>M</strong></td>\n"
#~ "                        <td>&nbsp;Move Obj</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>N</strong></td>\n"
#~ "                        <td>&nbsp;New Geometry</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>O</strong></td>\n"
#~ "                        <td>&nbsp;Set Origin</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Q</strong></td>\n"
#~ "                        <td>&nbsp;Change Units</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>P</strong></td>\n"
#~ "                        <td>&nbsp;Open Properties Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>R</strong></td>\n"
#~ "                        <td>&nbsp;Rotate by 90 degree CW</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>S</strong></td>\n"
#~ "                        <td>&nbsp;Shell Toggle</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>T</strong></td>\n"
#~ "                        <td>&nbsp;Add a Tool (when in Geometry Selected "
#~ "Tab or in Tools NCC or Tools Paint)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>V</strong></td>\n"
#~ "                        <td>&nbsp;Zoom Fit</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>X</strong></td>\n"
#~ "                        <td>&nbsp;Flip on X_axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Y</strong></td>\n"
#~ "                        <td>&nbsp;Flip on Y_axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>&#39;-&#39;</strong></"
#~ "td>\n"
#~ "                        <td>&nbsp;Zoom Out</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>&#39;=&#39;</strong></"
#~ "td>\n"
#~ "                        <td>&nbsp;Zoom In</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>CTRL+A</strong></td>\n"
#~ "                        <td>&nbsp;Select All</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>CTRL+C</strong></td>\n"
#~ "                        <td>&nbsp;Copy Obj</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>CTRL+E</strong></td>\n"
#~ "                        <td>&nbsp;Open Excellon File</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>CTRL+G</strong></td>\n"
#~ "                        <td>&nbsp;Open Gerber File</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>CTRL+N</strong></td>\n"
#~ "                        <td>&nbsp;New Project</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>CTRL+M</strong></td>\n"
#~ "                        <td>&nbsp;Measurement Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>CTRL+O</strong></td>\n"
#~ "                        <td>&nbsp;Open Project</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>CTRL+S</strong></td>\n"
#~ "                        <td>&nbsp;Save Project As</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>CTRL+F10</strong></td>\n"
#~ "                        <td>&nbsp;Toggle Plot Area</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>SHIFT+C</strong></td>\n"
#~ "                        <td>&nbsp;Copy Obj_Name</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>SHIFT+E</strong></td>\n"
#~ "                        <td>&nbsp;Toggle Code Editor</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>SHIFT+G</strong></td>\n"
#~ "                        <td>&nbsp;Toggle the axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>SHIFT+P</strong></td>\n"
#~ "                        <td>&nbsp;Open Preferences Window</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>SHIFT+R</strong></td>\n"
#~ "                        <td>&nbsp;Rotate by 90 degree CCW</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>SHIFT+S</strong></td>\n"
#~ "                        <td>&nbsp;Run a Script</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>SHIFT+W</strong></td>\n"
#~ "                        <td>&nbsp;Toggle the workspace</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>SHIFT+X</strong></td>\n"
#~ "                        <td>&nbsp;Skew on X axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>SHIFT+Y</strong></td>\n"
#~ "                        <td>&nbsp;Skew on Y axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+C</strong></td>\n"
#~ "                        <td>&nbsp;Calculators Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+D</strong></td>\n"
#~ "                        <td>&nbsp;2-Sided PCB Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+K</strong></td>\n"
#~ "                        <td>&nbsp;Solder Paste Dispensing Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+L</strong></td>\n"
#~ "                        <td>&nbsp;Film PCB Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+N</strong></td>\n"
#~ "                        <td>&nbsp;Non-Copper Clearing Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+P</strong></td>\n"
#~ "                        <td>&nbsp;Paint Area Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+Q</strong></td>\n"
#~ "                        <td>&nbsp;PDF Import Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+R</strong></td>\n"
#~ "                        <td>&nbsp;Transformations Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+S</strong></td>\n"
#~ "                        <td>&nbsp;View File Source</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+U</strong></td>\n"
#~ "                        <td>&nbsp;Cutout PCB Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+1</strong></td>\n"
#~ "                        <td>&nbsp;Enable all Plots</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+2</strong></td>\n"
#~ "                        <td>&nbsp;Disable all Plots</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+3</strong></td>\n"
#~ "                        <td>&nbsp;Disable Non-selected Plots</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+F10</strong></td>\n"
#~ "                        <td>&nbsp;Toggle Full Screen</td>\n"
#~ "                    </tr>                 \n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>CTRL+ALT+X</strong></"
#~ "td>\n"
#~ "                        <td>&nbsp;Abort current task (gracefully)</td>\n"
#~ "                    </tr>                    \n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>F1</strong></td>\n"
#~ "                        <td>&nbsp;Open Online Manual</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>F4</strong></td>\n"
#~ "                        <td>&nbsp;Open Online Tutorials</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Del</strong></td>\n"
#~ "                        <td>&nbsp;Delete Object</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Del</strong></td>\n"
#~ "                        <td>&nbsp;Alternate: Delete Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>'`'</strong></td>\n"
#~ "                        <td>&nbsp;(left to Key_1)Toogle Notebook Area "
#~ "(Left Side)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>SPACE</strong></td>\n"
#~ "                        <td>&nbsp;En(Dis)able Obj Plot</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Escape</strong></td>\n"
#~ "                        <td>&nbsp;Deselects all objects</td>\n"
#~ "                    </tr>\n"
#~ "                </tbody>\n"
#~ "            </table>\n"
#~ "    \n"
#~ "            "

#~ msgid ""
#~ "<b>Editor Shortcut list</b><br>\n"
#~ "            <br>\n"
#~ "            <strong><span style=\"color:#0000ff\">GEOMETRY EDITOR</span></"
#~ "strong><br>\n"
#~ "    \n"
#~ "            <table border=\"0\" cellpadding=\"0\" cellspacing=\"0\" style="
#~ "\"width:283px\">\n"
#~ "                <tbody>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\" width=\"89\"><strong>A</"
#~ "strong></td>\n"
#~ "                        <td width=\"194\">&nbsp;Draw an Arc</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>B</strong></td>\n"
#~ "                        <td>&nbsp;Buffer Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>C</strong></td>\n"
#~ "                        <td>&nbsp;Copy Geo Item</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>D</strong></td>\n"
#~ "                        <td>&nbsp;Within Add Arc will toogle the ARC "
#~ "direction: CW or CCW</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>E</strong></td>\n"
#~ "                        <td>&nbsp;Polygon Intersection Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>I</strong></td>\n"
#~ "                        <td>&nbsp;Paint Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>J</strong></td>\n"
#~ "                        <td>&nbsp;Jump to Location (x, y)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>K</strong></td>\n"
#~ "                        <td>&nbsp;Toggle Corner Snap</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>M</strong></td>\n"
#~ "                        <td>&nbsp;Move Geo Item</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>M</strong></td>\n"
#~ "                        <td>&nbsp;Within Add Arc will cycle through the "
#~ "ARC modes</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>N</strong></td>\n"
#~ "                        <td>&nbsp;Draw a Polygon</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>O</strong></td>\n"
#~ "                        <td>&nbsp;Draw a Circle</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>P</strong></td>\n"
#~ "                        <td>&nbsp;Draw a Path</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>R</strong></td>\n"
#~ "                        <td>&nbsp;Draw Rectangle</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>S</strong></td>\n"
#~ "                        <td>&nbsp;Polygon Substraction Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>T</strong></td>\n"
#~ "                        <td>&nbsp;Add Text Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>U</strong></td>\n"
#~ "                        <td>&nbsp;Polygon Union Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>X</strong></td>\n"
#~ "                        <td>&nbsp;Flip shape on X axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Y</strong></td>\n"
#~ "                        <td>&nbsp;Flip shape on Y axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>SHIFT+X</strong></td>\n"
#~ "                        <td>&nbsp;Skew shape on X axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>SHIFT+Y</strong></td>\n"
#~ "                        <td>&nbsp;Skew shape on Y axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+R</strong></td>\n"
#~ "                        <td>&nbsp;Editor Transformation Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+X</strong></td>\n"
#~ "                        <td>&nbsp;Offset shape on X axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+Y</strong></td>\n"
#~ "                        <td>&nbsp;Offset shape on Y axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>CTRL+M</strong></td>\n"
#~ "                        <td>&nbsp;Measurement Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>CTRL+S</strong></td>\n"
#~ "                        <td>&nbsp;Save Object and Exit Editor</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>CTRL+X</strong></td>\n"
#~ "                        <td>&nbsp;Polygon Cut Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Space</strong></td>\n"
#~ "                        <td>&nbsp;Rotate Geometry</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ENTER</strong></td>\n"
#~ "                        <td>&nbsp;Finish drawing for certain tools</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ESC</strong></td>\n"
#~ "                        <td>&nbsp;Abort and return to Select</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Del</strong></td>\n"
#~ "                        <td>&nbsp;Delete Shape</td>\n"
#~ "                    </tr>\n"
#~ "                </tbody>\n"
#~ "            </table>\n"
#~ "            <br>\n"
#~ "            <br>\n"
#~ "            <strong><span style=\"color:#ff0000\">EXCELLON EDITOR</span></"
#~ "strong><br>\n"
#~ "            <table border=\"0\" cellpadding=\"0\" cellspacing=\"0\" style="
#~ "\"width:283px\">\n"
#~ "                <tbody>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\" width=\"89\"><strong>A</"
#~ "strong></td>\n"
#~ "                        <td width=\"194\">&nbsp;Add Drill Array</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>C</strong></td>\n"
#~ "                        <td>&nbsp;Copy Drill(s)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>D</strong></td>\n"
#~ "                        <td>&nbsp;Add Drill</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>J</strong></td>\n"
#~ "                        <td>&nbsp;Jump to Location (x, y)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>M</strong></td>\n"
#~ "                        <td>&nbsp;Move Drill(s)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\" width=\"89\"><strong>Q</"
#~ "strong></td>\n"
#~ "                        <td width=\"194\">&nbsp;Add Slot Array</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>R</strong></td>\n"
#~ "                        <td>&nbsp;Resize Drill(s)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>T</strong></td>\n"
#~ "                        <td>&nbsp;Add a new Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\" width=\"89\"><strong>W</"
#~ "strong></td>\n"
#~ "                        <td width=\"194\">&nbsp;Add Slot</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Del</strong></td>\n"
#~ "                        <td>&nbsp;Delete Drill(s)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Del</strong></td>\n"
#~ "                        <td>&nbsp;Alternate: Delete Tool(s)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ESC</strong></td>\n"
#~ "                        <td>&nbsp;Abort and return to Select</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>CTRL+S</strong></td>\n"
#~ "                        <td>&nbsp;Save Object and Exit Editor</td>\n"
#~ "                    </tr>\n"
#~ "                </tbody>\n"
#~ "            </table>\n"
#~ "            <br>\n"
#~ "            <br>\n"
#~ "            <strong><span style=\"color:#00ff00\">GERBER EDITOR</span></"
#~ "strong><br>\n"
#~ "            <table border=\"0\" cellpadding=\"0\" cellspacing=\"0\" style="
#~ "\"width:283px\">\n"
#~ "                <tbody>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\" width=\"89\"><strong>A</"
#~ "strong></td>\n"
#~ "                        <td width=\"194\">&nbsp;Add Pad Array</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>B</strong></td>\n"
#~ "                        <td>&nbsp;Buffer</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>C</strong></td>\n"
#~ "                        <td>&nbsp;Copy</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>D</strong></td>\n"
#~ "                        <td>&nbsp;Add Disc</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>E</strong></td>\n"
#~ "                        <td>&nbsp;Add SemiDisc</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>J</strong></td>\n"
#~ "                        <td>&nbsp;Jump to Location (x, y)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>M</strong></td>\n"
#~ "                        <td>&nbsp;Move</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>N</strong></td>\n"
#~ "                        <td>&nbsp;Add Region</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>P</strong></td>\n"
#~ "                        <td>&nbsp;Add Pad</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>R</strong></td>\n"
#~ "                        <td>&nbsp;Within Track & Region Tools will cycle "
#~ "in REVERSE the bend modes</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>S</strong></td>\n"
#~ "                        <td>&nbsp;Scale</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>T</strong></td>\n"
#~ "                        <td>&nbsp;Add Track</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>T</strong></td>\n"
#~ "                        <td>&nbsp;Within Track & Region Tools will cycle "
#~ "FORWARD the bend modes</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Del</strong></td>\n"
#~ "                        <td>&nbsp;Delete</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Del</strong></td>\n"
#~ "                        <td>&nbsp;Alternate: Delete Apertures</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ESC</strong></td>\n"
#~ "                        <td>&nbsp;Abort and return to Select</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>CTRL+E</strong></td>\n"
#~ "                        <td>&nbsp;Eraser Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>CTRL+S</strong></td>\n"
#~ "                        <td>&nbsp;Save Object and Exit Editor</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                     <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+A</strong></td>\n"
#~ "                        <td>&nbsp;Mark Area Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+N</strong></td>\n"
#~ "                        <td>&nbsp;Poligonize Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+R</strong></td>\n"
#~ "                        <td>&nbsp;Transformation Tool</td>\n"
#~ "                    </tr>\n"
#~ "                </tbody>\n"
#~ "            </table>\n"
#~ "                    "
#~ msgstr ""
#~ "<b>Editor Shortcut list</b><br>\n"
#~ "            <br>\n"
#~ "            <strong><span style=\"color:#0000ff\">GEOMETRY EDITOR</span></"
#~ "strong><br>\n"
#~ "    \n"
#~ "            <table border=\"0\" cellpadding=\"0\" cellspacing=\"0\" style="
#~ "\"width:283px\">\n"
#~ "                <tbody>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\" width=\"89\"><strong>A</"
#~ "strong></td>\n"
#~ "                        <td width=\"194\">&nbsp;Draw an Arc</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>B</strong></td>\n"
#~ "                        <td>&nbsp;Buffer Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>C</strong></td>\n"
#~ "                        <td>&nbsp;Copy Geo Item</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>D</strong></td>\n"
#~ "                        <td>&nbsp;Within Add Arc will toogle the ARC "
#~ "direction: CW or CCW</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>E</strong></td>\n"
#~ "                        <td>&nbsp;Polygon Intersection Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>I</strong></td>\n"
#~ "                        <td>&nbsp;Paint Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>J</strong></td>\n"
#~ "                        <td>&nbsp;Jump to Location (x, y)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>K</strong></td>\n"
#~ "                        <td>&nbsp;Toggle Corner Snap</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>M</strong></td>\n"
#~ "                        <td>&nbsp;Move Geo Item</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>M</strong></td>\n"
#~ "                        <td>&nbsp;Within Add Arc will cycle through the "
#~ "ARC modes</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>N</strong></td>\n"
#~ "                        <td>&nbsp;Draw a Polygon</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>O</strong></td>\n"
#~ "                        <td>&nbsp;Draw a Circle</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>P</strong></td>\n"
#~ "                        <td>&nbsp;Draw a Path</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>R</strong></td>\n"
#~ "                        <td>&nbsp;Draw Rectangle</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>S</strong></td>\n"
#~ "                        <td>&nbsp;Polygon Substraction Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>T</strong></td>\n"
#~ "                        <td>&nbsp;Add Text Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>U</strong></td>\n"
#~ "                        <td>&nbsp;Polygon Union Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>X</strong></td>\n"
#~ "                        <td>&nbsp;Flip shape on X axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Y</strong></td>\n"
#~ "                        <td>&nbsp;Flip shape on Y axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>SHIFT+X</strong></td>\n"
#~ "                        <td>&nbsp;Skew shape on X axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>SHIFT+Y</strong></td>\n"
#~ "                        <td>&nbsp;Skew shape on Y axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+R</strong></td>\n"
#~ "                        <td>&nbsp;Editor Transformation Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+X</strong></td>\n"
#~ "                        <td>&nbsp;Offset shape on X axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+Y</strong></td>\n"
#~ "                        <td>&nbsp;Offset shape on Y axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>CTRL+M</strong></td>\n"
#~ "                        <td>&nbsp;Measurement Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>CTRL+S</strong></td>\n"
#~ "                        <td>&nbsp;Save Object and Exit Editor</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>CTRL+X</strong></td>\n"
#~ "                        <td>&nbsp;Polygon Cut Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Space</strong></td>\n"
#~ "                        <td>&nbsp;Rotate Geometry</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ENTER</strong></td>\n"
#~ "                        <td>&nbsp;Finish drawing for certain tools</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ESC</strong></td>\n"
#~ "                        <td>&nbsp;Abort and return to Select</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Del</strong></td>\n"
#~ "                        <td>&nbsp;Delete Shape</td>\n"
#~ "                    </tr>\n"
#~ "                </tbody>\n"
#~ "            </table>\n"
#~ "            <br>\n"
#~ "            <br>\n"
#~ "            <strong><span style=\"color:#ff0000\">EXCELLON EDITOR</span></"
#~ "strong><br>\n"
#~ "            <table border=\"0\" cellpadding=\"0\" cellspacing=\"0\" style="
#~ "\"width:283px\">\n"
#~ "                <tbody>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\" width=\"89\"><strong>A</"
#~ "strong></td>\n"
#~ "                        <td width=\"194\">&nbsp;Add Drill Array</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>C</strong></td>\n"
#~ "                        <td>&nbsp;Copy Drill(s)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>D</strong></td>\n"
#~ "                        <td>&nbsp;Add Drill</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>J</strong></td>\n"
#~ "                        <td>&nbsp;Jump to Location (x, y)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>M</strong></td>\n"
#~ "                        <td>&nbsp;Move Drill(s)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\" width=\"89\"><strong>Q</"
#~ "strong></td>\n"
#~ "                        <td width=\"194\">&nbsp;Add Slot Array</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>R</strong></td>\n"
#~ "                        <td>&nbsp;Resize Drill(s)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>T</strong></td>\n"
#~ "                        <td>&nbsp;Add a new Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\" width=\"89\"><strong>W</"
#~ "strong></td>\n"
#~ "                        <td width=\"194\">&nbsp;Add Slot</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Del</strong></td>\n"
#~ "                        <td>&nbsp;Delete Drill(s)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Del</strong></td>\n"
#~ "                        <td>&nbsp;Alternate: Delete Tool(s)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ESC</strong></td>\n"
#~ "                        <td>&nbsp;Abort and return to Select</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>CTRL+S</strong></td>\n"
#~ "                        <td>&nbsp;Save Object and Exit Editor</td>\n"
#~ "                    </tr>\n"
#~ "                </tbody>\n"
#~ "            </table>\n"
#~ "            <br>\n"
#~ "            <br>\n"
#~ "            <strong><span style=\"color:#00ff00\">GERBER EDITOR</span></"
#~ "strong><br>\n"
#~ "            <table border=\"0\" cellpadding=\"0\" cellspacing=\"0\" style="
#~ "\"width:283px\">\n"
#~ "                <tbody>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\" width=\"89\"><strong>A</"
#~ "strong></td>\n"
#~ "                        <td width=\"194\">&nbsp;Add Pad Array</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>B</strong></td>\n"
#~ "                        <td>&nbsp;Buffer</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>C</strong></td>\n"
#~ "                        <td>&nbsp;Copy</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>D</strong></td>\n"
#~ "                        <td>&nbsp;Add Disc</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>E</strong></td>\n"
#~ "                        <td>&nbsp;Add SemiDisc</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>J</strong></td>\n"
#~ "                        <td>&nbsp;Jump to Location (x, y)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>M</strong></td>\n"
#~ "                        <td>&nbsp;Move</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>N</strong></td>\n"
#~ "                        <td>&nbsp;Add Region</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>P</strong></td>\n"
#~ "                        <td>&nbsp;Add Pad</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>R</strong></td>\n"
#~ "                        <td>&nbsp;Within Track & Region Tools will cycle "
#~ "in REVERSE the bend modes</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>S</strong></td>\n"
#~ "                        <td>&nbsp;Scale</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>T</strong></td>\n"
#~ "                        <td>&nbsp;Add Track</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>T</strong></td>\n"
#~ "                        <td>&nbsp;Within Track & Region Tools will cycle "
#~ "FORWARD the bend modes</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Del</strong></td>\n"
#~ "                        <td>&nbsp;Delete</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Del</strong></td>\n"
#~ "                        <td>&nbsp;Alternate: Delete Apertures</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ESC</strong></td>\n"
#~ "                        <td>&nbsp;Abort and return to Select</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>CTRL+E</strong></td>\n"
#~ "                        <td>&nbsp;Eraser Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>CTRL+S</strong></td>\n"
#~ "                        <td>&nbsp;Save Object and Exit Editor</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                     <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+A</strong></td>\n"
#~ "                        <td>&nbsp;Mark Area Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+N</strong></td>\n"
#~ "                        <td>&nbsp;Poligonize Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+R</strong></td>\n"
#~ "                        <td>&nbsp;Transformation Tool</td>\n"
#~ "                    </tr>\n"
#~ "                </tbody>\n"
#~ "            </table>\n"
#~ "                    "

#~ msgid "[success] Done."
#~ msgstr "[success] Done."

#~ msgid "[WARNING_NOTCL] Cancelled."
#~ msgstr "[WARNING_NOTCL] Cancelled."

#~ msgid "[success] Added new tool with dia: {dia} {units}"
#~ msgstr "[success] Added new tool with dia: {dia} {units}"

#~ msgid "[WARNING_NOTCL] Application is saving the project. Please wait ..."
#~ msgstr "[WARNING_NOTCL] Application is saving the project. Please wait ..."

#~ msgid "<b>%s:</b>"
#~ msgstr "<b>%s:</b>"

#~ msgid "%s:"
#~ msgstr "%s:"

#~| msgid "[ERROR_NOTCL] Object not found: %s"
#~ msgid "Object not found: %s"
#~ msgstr "Object not found: %s"

#~ msgid "[success] Opened: %s"
#~ msgstr "[success] Opened: %s"

#~ msgid "[success] Paint All Done."
#~ msgstr "[success] Paint All Done."

#~| msgid ""
#~| "[ERROR] Could not do Paint All. Try a different combination of "
#~| "parameters. Or a different Method of paint\n"
#~| "%s"
#~ msgid ""
#~ "Could not do Paint All. Try a different combination of parameters. Or a "
#~ "different Method of paint\n"
#~ "%s"
#~ msgstr ""
#~ "Could not do Paint All. Try a different combination of parameters. Or a "
#~ "different Method of paint\n"
#~ "%s"

#~| msgid "[success] Paint All Done."
#~ msgid "[success] Paint Area Done."
#~ msgstr "[success] Paint Area Done."

#~ msgid "Generating panel ... Please wait."
#~ msgstr "Generating panel ... Please wait."

#~ msgid "...proccessing... [%s]"
#~ msgstr "...proccessing... [%s]"

#~ msgid "Parsing aperture %s geometry ..."
#~ msgstr "Parsing aperture %s geometry ..."

#~ msgid "[success] Skew on the %s axis done ..."
#~ msgstr "[success] Skew on the %s axis done ..."

#~ msgid "[ERROR_NOTCL] Could not load defaults file."
#~ msgstr "[ERROR_NOTCL] Could not load defaults file."

#~ msgid "[ERROR_NOTCL] Failed to parse defaults file."
#~ msgstr "[ERROR_NOTCL] Failed to parse defaults file."

#~ msgid "[ERROR_NOTCL] An internal error has ocurred. See shell.\n"
#~ msgstr "[ERROR_NOTCL] An internal error has ocurred. See shell.\n"

#~ msgid "[success] Defaults saved."
#~ msgstr "[success] Defaults saved."

#~ msgid "[success] Converted units to %s"
#~ msgstr "[success] Converted units to %s"

#~ msgid "[WARNING_NOTCL] Export Code cancelled."
#~ msgstr "[WARNING_NOTCL] Export Code cancelled."

#~ msgid "[success] Origin set ..."
#~ msgstr "[success] Origin set ..."

#~ msgid "[success] Skew on X axis done."
#~ msgstr "[success] Skew on X axis done."

#~ msgid "[success] Skew on Y axis done."
#~ msgstr "[success] Skew on Y axis done."

#~ msgid "[success] New Grid added ..."
#~ msgstr "[success] New Grid added ..."

#~ msgid "[WARNING_NOTCL] Open Gerber cancelled."
#~ msgstr "[WARNING_NOTCL] Open Gerber cancelled."

#~ msgid "[WARNING_NOTCL] Open G-Code cancelled."
#~ msgstr "[WARNING_NOTCL] Open G-Code cancelled."

#~ msgid "[WARNING_NOTCL] Open Project cancelled."
#~ msgstr "[WARNING_NOTCL] Open Project cancelled."

#~ msgid "[WARNING_NOTCL] Open Config cancelled."
#~ msgstr "[WARNING_NOTCL] Open Config cancelled."

#~ msgid "[WARNING_NOTCL] No object selected."
#~ msgstr "[WARNING_NOTCL] No object selected."

#~ msgid "[WARNING_NOTCL] Export SVG cancelled."
#~ msgstr "[WARNING_NOTCL] Export SVG cancelled."

#~ msgid "[WARNING_NOTCL] Export Excellon cancelled."
#~ msgstr "[WARNING_NOTCL] Export Excellon cancelled."

#~ msgid "[WARNING_NOTCL] Export Gerber cancelled."
#~ msgstr "[WARNING_NOTCL] Export Gerber cancelled."

#~ msgid "[WARNING_NOTCL] Export DXF cancelled."
#~ msgstr "[WARNING_NOTCL] Export DXF cancelled."

#~ msgid "[WARNING_NOTCL] Open SVG cancelled."
#~ msgstr "[WARNING_NOTCL] Open SVG cancelled."

#~ msgid "[WARNING_NOTCL] Open DXF cancelled."
#~ msgstr "[WARNING_NOTCL] Open DXF cancelled."

#~ msgid "[WARNING_NOTCL] No object Box. Using instead %s"
#~ msgstr "[WARNING_NOTCL] No object Box. Using instead %s"

#~ msgid "[ERROR_NOTCL] Failed to parse file: {name}. {error}"
#~ msgstr "[ERROR_NOTCL] Failed to parse file: {name}. {error}"

#~ msgid "[ERROR_NOTCL] An internal error has occurred. See shell.\n"
#~ msgstr "[ERROR_NOTCL] An internal error has occurred. See shell.\n"

#~ msgid "[ERROR_NOTCL] Failed to verify project file: %s. Retry to save it."
#~ msgstr "[ERROR_NOTCL] Failed to verify project file: %s. Retry to save it."

#~ msgid ""
#~ "[ERROR_NOTCL] Failed to parse saved project file: %s. Retry to save it."
#~ msgstr ""
#~ "[ERROR_NOTCL] Failed to parse saved project file: %s. Retry to save it."

#~ msgid "[ERROR_NOTCL] Failed to save project file: %s. Retry to save it."
#~ msgstr "[ERROR_NOTCL] Failed to save project file: %s. Retry to save it."

#~ msgid "[ERROR_NOTCL] Wrong value format entered, use a number."
#~ msgstr "[ERROR_NOTCL] Wrong value format entered, use a number."

#~ msgid "[ERROR_NOTCL] Cancelled. Empty file, it has no geometry..."
#~ msgstr "[ERROR_NOTCL] Cancelled. Empty file, it has no geometry..."

#~ msgid "[WARNING_NOTCL] Export Machine Code cancelled ..."
#~ msgstr "[WARNING_NOTCL] Export Machine Code cancelled ..."

#~ msgid "[WARNING_NOTCL] No such file or directory"
#~ msgstr "[WARNING_NOTCL] No such file or directory"

#~ msgid "[ERROR_NOTCL] The value is mistyped. Check the value. %s"
#~ msgstr "[ERROR_NOTCL] The value is mistyped. Check the value. %s"

#~ msgid "[ERROR_NOTCL] Cancelled."
#~ msgstr "[ERROR_NOTCL] Cancelled."

#~ msgid "Tool Dia:"
#~ msgstr "Tool Dia:"

#~ msgid "Nr of drills:"
#~ msgstr "Nr of drills:"

#~ msgid "Direction:"
#~ msgstr "Direction:"

#~ msgid "Pitch:"
#~ msgstr "Pitch:"

#~ msgid "Length:"
#~ msgstr "Length:"

#~ msgid "Nr of slots:"
#~ msgstr "Nr of slots:"

#~ msgid "[success] Deleted tool with dia: {del_dia} {units}"
#~ msgstr "[success] Deleted tool with dia: {del_dia} {units}"

#~ msgid "Tool dia:"
#~ msgstr "Tool dia:"

#~ msgid "Overlap Rate:"
#~ msgstr "Overlap Rate:"

#~ msgid "Method:"
#~ msgstr "Method:"

#~ msgid "[ERROR_NOTCL] Wrong value format entered for Rotate, use a number."
#~ msgstr "[ERROR_NOTCL] Wrong value format entered for Rotate, use a number."

#~ msgid "[ERROR_NOTCL] Wrong value format entered for Skew X, use a number."
#~ msgstr "[ERROR_NOTCL] Wrong value format entered for Skew X, use a number."

#~ msgid "[ERROR_NOTCL] Wrong value format entered for Skew Y, use a number."
#~ msgstr "[ERROR_NOTCL] Wrong value format entered for Skew Y, use a number."

#~ msgid "[ERROR_NOTCL] Wrong value format entered for Scale X, use a number."
#~ msgstr "[ERROR_NOTCL] Wrong value format entered for Scale X, use a number."

#~ msgid "[ERROR_NOTCL] Wrong value format entered for Scale Y, use a number."
#~ msgstr "[ERROR_NOTCL] Wrong value format entered for Scale Y, use a number."

#~ msgid "[ERROR_NOTCL] Wrong value format entered for Offset X, use a number."
#~ msgstr ""
#~ "[ERROR_NOTCL] Wrong value format entered for Offset X, use a number."

#~ msgid "[ERROR_NOTCL] Wrong value format entered for Offset Y, use a number."
#~ msgstr ""
#~ "[ERROR_NOTCL] Wrong value format entered for Offset Y, use a number."

#~ msgid "[success] Flip on the Y axis done ..."
#~ msgstr "[success] Flip on the Y axis done ..."

#~ msgid "[success] Flip on the X axis done ..."
#~ msgstr "[success] Flip on the X axis done ..."

#~ msgid "[success] Offset on the %s axis done ..."
#~ msgstr "[success] Offset on the %s axis done ..."

#~ msgid ""
#~ "[WARNING_NOTCL] Editing MultiGeo Geometry, tool: {tool} with diameter: "
#~ "{dia}"
#~ msgstr ""
#~ "[WARNING_NOTCL] Editing MultiGeo Geometry, tool: {tool} with diameter: "
#~ "{dia}"

#~ msgid "Clear GUI Settings:"
#~ msgstr "Clear GUI Settings:"

#~ msgid "Duration:"
#~ msgstr "Duration:"

#~ msgid "Fast Plunge:"
#~ msgstr "Fast Plunge:"

#~ msgid "Linear Dir.:"
#~ msgstr "Linear Dir.:"

#~ msgid "Plot kind:"
#~ msgstr "Plot kind:"

#~ msgid ""
#~ "Select from the Tools Table above\n"
#~ "the tools you want to include."
#~ msgstr ""
#~ "Select from the Tools Table above\n"
#~ "the tools you want to include."

#~ msgid ""
#~ "[WARNING_NOTCL] Tool Diameter is zero value. Change it to a positive real "
#~ "number."
#~ msgstr ""
#~ "[WARNING_NOTCL] Tool Diameter is zero value. Change it to a positive real "
#~ "number."

#~ msgid "[success] Gerber %s was mirrored..."
#~ msgstr "[success] Gerber %s was mirrored..."

#~ msgid "[success] Excellon %s was mirrored..."
#~ msgstr "[success] Excellon %s was mirrored..."

#~ msgid "[success] Geometry %s was mirrored..."
#~ msgstr "[success] Geometry %s was mirrored..."

#~ msgid "[WARNING_NOTCL] No object(s) selected."
#~ msgstr "[WARNING_NOTCL] No object(s) selected."

#~ msgid "[success] %s object was moved ..."
#~ msgstr "[success] %s object was moved ..."

#~ msgid "[WARNING_NOTCL] Object(s) not selected"
#~ msgstr "[WARNING_NOTCL] Object(s) not selected"

#~ msgid "[WARNING_NOTCL] Buffering ..."
#~ msgstr "[WARNING_NOTCL] Buffering ..."

#~ msgid "[success] Non-Copper Clearing with ToolDia = %s started."
#~ msgstr "[success] Non-Copper Clearing with ToolDia = %s started."

#~ msgid "[ERROR_NOTCL] NCCTool.clear_non_copper() --> %s"
#~ msgstr "[ERROR_NOTCL] NCCTool.clear_non_copper() --> %s"

#~ msgid "[success] NCC Tool finished."
#~ msgstr "[success] NCC Tool finished."

#~ msgid ""
#~ "[WARNING_NOTCL] NCC Tool finished but some PCB features could not be "
#~ "cleared. Check the result."
#~ msgstr ""
#~ "[WARNING_NOTCL] NCC Tool finished but some PCB features could not be "
#~ "cleared. Check the result."

#~ msgid "[success] Non-Copper Rest Clearing with ToolDia = %s started."
#~ msgstr "[success] Non-Copper Rest Clearing with ToolDia = %s started."

#~ msgid "[ERROR_NOTCL] NCCTool.clear_non_copper_rest() --> %s"
#~ msgstr "[ERROR_NOTCL] NCCTool.clear_non_copper_rest() --> %s"

#~ msgid ""
#~ "[ERROR_NOTCL] NCC Tool finished but could not clear the object with "
#~ "current settings."
#~ msgstr ""
#~ "[ERROR_NOTCL] NCC Tool finished but could not clear the object with "
#~ "current settings."

#~ msgid "[WARNING_NOTCL] Open PDF cancelled."
#~ msgstr "[WARNING_NOTCL] Open PDF cancelled."

#~ msgid "[ERROR_NOTCL] Open PDF file failed."
#~ msgstr "[ERROR_NOTCL] Open PDF file failed."

#~ msgid "[success] Rendered: %s"
#~ msgstr "[success] Rendered: %s"

#~ msgid ""
#~ "How to select the polygons to paint.<BR>Options:<BR>- <B>Single Polygons</"
#~ "B>: left mouse click on the polygon to be painted.<BR>- <B>Area "
#~ "Selection</B>: left mouse click to start selection of the area to be "
#~ "painted.<BR>- <B>All Polygons</B>: paint all polygons.<BR>- <B>Reference "
#~ "Object</B>: paint an area described by an external reference object."
#~ msgstr ""
#~ "How to select the polygons to paint.<BR>Options:<BR>- <B>Single Polygons</"
#~ "B>: left mouse click on the polygon to be painted.<BR>- <B>Area "
#~ "Selection</B>: left mouse click to start selection of the area to be "
#~ "painted.<BR>- <B>All Polygons</B>: paint all polygons.<BR>- <B>Reference "
#~ "Object</B>: paint an area described by an external reference object."

#~ msgid ""
#~ "[ERROR_NOTCL] There is no Painting Geometry in the file.\n"
#~ "Usually it means that the tool diameter is too big for the painted "
#~ "geometry.\n"
#~ "Change the painting parameters and try again."
#~ msgstr ""
#~ "[ERROR_NOTCL] There is no Painting Geometry in the file.\n"
#~ "Usually it means that the tool diameter is too big for the painted "
#~ "geometry.\n"
#~ "Change the painting parameters and try again."

#~ msgid "[WARNING_NOTCL]No object Box. Using instead %s"
#~ msgstr "[WARNING_NOTCL]No object Box. Using instead %s"

#~ msgid "[success] Imported: %s"
#~ msgstr "[success] Imported: %s"

#~ msgid "[ERROR_NOTCL] Generating new object failed."
#~ msgstr "[ERROR_NOTCL] Generating new object failed."

#~ msgid "[success] Created: %s"
#~ msgstr "[success] Created: %s"

#~ msgid "[success] Rotate done ..."
#~ msgstr "[success] Rotate done ..."

#~ msgid ""
#~ "When choosing the 'Itself' option the non copper clearing extent\n"
#~ "is based on the object that is copper cleared.\n"
#~ " Choosing the 'Box' option will do non copper clearing within the box\n"
#~ "specified by another object different than the one that is copper cleared."
#~ msgstr ""
#~ "When choosing the 'Itself' option the non copper clearing extent\n"
#~ "is based on the object that is copper cleared.\n"
#~ " Choosing the 'Box' option will do non copper clearing within the box\n"
#~ "specified by another object different than the one that is copper cleared."

#~ msgid ""
#~ "How to select the polygons to paint.<BR>Options:<BR>- <B>Single</B>: left "
#~ "mouse click on the polygon to be painted.<BR>- <B>Area</B>: left mouse "
#~ "click to start selection of the area to be painted.<BR>- <B>All</B>: "
#~ "paint all polygons.<BR>- <B>Ref</B>: paint an area described by an "
#~ "external reference object."
#~ msgstr ""
#~ "How to select the polygons to paint.<BR>Options:<BR>- <B>Single</B>: left "
#~ "mouse click on the polygon to be painted.<BR>- <B>Area</B>: left mouse "
#~ "click to start selection of the area to be painted.<BR>- <B>All</B>: "
#~ "paint all polygons.<BR>- <B>Ref</B>: paint an area described by an "
#~ "external reference object."

#~ msgid "Geometry object to be painted.                        "
#~ msgstr "Geometry object to be painted.                        "

#~ msgid ""
#~ "After clicking here, click inside<BR>the polygon you wish to be painted "
#~ "if <B>Single</B> is selected.<BR>If <B>Area</B> is selected, then the "
#~ "selection of the area to be painted<BR>will be initiated by a first click "
#~ "and finished by the second mouse click.<BR>If <B>All</B>  is selected "
#~ "then the Paint will start after click.<BR>If <B>Ref</B>  is selected then "
#~ "the Paint will start after click,<BR>and the painted area will be "
#~ "described by a selected object.<BR>A new Geometry object with the tool "
#~ "paths will be created."
#~ msgstr ""
#~ "After clicking here, click inside<BR>the polygon you wish to be painted "
#~ "if <B>Single</B> is selected.<BR>If <B>Area</B> is selected, then the "
#~ "selection of the area to be painted<BR>will be initiated by a first click "
#~ "and finished by the second mouse click.<BR>If <B>All</B>  is selected "
#~ "then the Paint will start after click.<BR>If <B>Ref</B>  is selected then "
#~ "the Paint will start after click,<BR>and the painted area will be "
#~ "described by a selected object.<BR>A new Geometry object with the tool "
#~ "paths will be created."

#~ msgid "<b>Apertures:</b>"
#~ msgstr "<b>Apertures:</b>"

#~ msgid "Aperture Code:"
#~ msgstr "Aperture Code:"

#~ msgid "<b>Languages:</b>"
#~ msgstr "<b>Languages:</b>"

#~ msgid "Width (# passes):"
#~ msgstr "Width (# passes):"

#~| msgid "<b>Clear non-copper:</b>"
#~ msgid "Clear non-copper"
#~ msgstr "Clear non-copper"

#~ msgid "Rounded corners"
#~ msgstr "Rounded corners"

#~ msgid ""
#~ "Creates a Geometry objects with polygons\n"
#~ "covering the copper-free areas of the PCB."
#~ msgstr ""
#~ "Creates a Geometry objects with polygons\n"
#~ "covering the copper-free areas of the PCB."

#~ msgid "<b>Bounding Box:</b>"
#~ msgstr "<b>Bounding Box:</b>"

#~ msgid "<b>Units</b>:"
#~ msgstr "<b>Units</b>:"

#~ msgid "<b>Zeros</b>:"
#~ msgstr "<b>Zeros</b>:"

#~ msgid "INCH:"
#~ msgstr "INCH:"

#~ msgid "Tool change:"
#~ msgstr "Tool change:"

#~ msgid "Toolchange Z position."
#~ msgstr "Toolchange Z position."

#~ msgid "Feedrate:"
#~ msgstr "Feedrate:"

#~ msgid ""
#~ "Tool speed while drilling\n"
#~ "(in units per minute)."
#~ msgstr ""
#~ "Tool speed while drilling\n"
#~ "(in units per minute)."

#~ msgid "<b>Gcode:    </b>"
#~ msgstr "<b>Gcode:    </b>"

#~ msgid "Offset Z:"
#~ msgstr "Offset Z:"

#~ msgid "<b>Slots:</b>"
#~ msgstr "<b>Slots:</b>"

#~ msgid "<b>Create CNC Job:</b>"
#~ msgstr "<b>Create CNC Job:</b>"

#~ msgid "Multidepth"
#~ msgstr "Multidepth"

#~ msgid "Multidepth usage: True or False."
#~ msgstr "Multidepth usage: True or False."

#~ msgid ""
#~ "The postprocessor file that dictates\n"
#~ "Machine Code output."
#~ msgstr ""
#~ "The postprocessor file that dictates\n"
#~ "Machine Code output."

#~ msgid "Display Annotation:"
#~ msgstr "Display Annotation:"

#~ msgid ""
#~ "Type here any G-Code commands you would\n"
#~ "like to be executed when Toolchange event is encountered.\n"
#~ "This will constitute a Custom Toolchange GCode,\n"
#~ "or a Toolchange Macro."
#~ msgstr ""
#~ "Type here any G-Code commands you would\n"
#~ "like to be executed when Toolchange event is encountered.\n"
#~ "This will constitute a Custom Toolchange GCode,\n"
#~ "or a Toolchange Macro."

#~ msgid ""
#~ "If checked, use 'rest machining'.\n"
#~ "Basically it will clear copper outside PCB features,\n"
#~ "using the biggest tool and continue with the next tools,\n"
#~ "from bigger to smaller, to clear areas of copper that\n"
#~ "could not be cleared by previous tool.\n"
#~ "If not checked, use the standard algorithm."
#~ msgstr ""
#~ "If checked, use 'rest machining'.\n"
#~ "Basically it will clear copper outside PCB features,\n"
#~ "using the biggest tool and continue with the next tools,\n"
#~ "from bigger to smaller, to clear areas of copper that\n"
#~ "could not be cleared by previous tool.\n"
#~ "If not checked, use the standard algorithm."

#~ msgid "Offset:"
#~ msgstr "Offset:"

#~ msgid ""
#~ "Distance from objects at which\n"
#~ "to draw the cutout."
#~ msgstr ""
#~ "Distance from objects at which\n"
#~ "to draw the cutout."

#~ msgid ""
#~ "Size of the gaps in the toolpath\n"
#~ "that will remain to hold the\n"
#~ "board in place."
#~ msgstr ""
#~ "Size of the gaps in the toolpath\n"
#~ "that will remain to hold the\n"
#~ "board in place."

#~ msgid "Create a convex shape surrounding the entire PCB."
#~ msgstr "Create a convex shape surrounding the entire PCB."

#~ msgid ""
#~ "The axis should pass through a <b>point</b> or cut\n"
#~ " a specified <b>box</b> (in a Geometry object) in \n"
#~ "the middle."
#~ msgstr ""
#~ "The axis should pass through a <b>point</b> or cut\n"
#~ " a specified <b>box</b> (in a Geometry object) in \n"
#~ "the middle."

#~ msgid ""
#~ "How much (fraction) of the tool\n"
#~ "width to overlap each tool pass."
#~ msgstr ""
#~ "How much (fraction) of the tool\n"
#~ "width to overlap each tool pass."

#~ msgid "Panel Type:"
#~ msgstr "Panel Type:"

#~ msgid "Tip angle:"
#~ msgstr "Tip angle:"

#~ msgid "Angle for rotation. In degrees."
#~ msgstr "Angle for rotation. In degrees."

#~ msgid "Angle for Skew/Shear on X axis. In degrees."
#~ msgstr "Angle for Skew/Shear on X axis. In degrees."

#~ msgid "Angle for Skew/Shear on Y axis. In degrees."
#~ msgstr "Angle for Skew/Shear on Y axis. In degrees."

#~ msgid "XY Toolchange:"
#~ msgstr "XY Toolchange:"

#~ msgid "PostProcessors:"
#~ msgstr "PostProcessors:"

#~ msgid "<b>Scale:</b>"
#~ msgstr "<b>Scale:</b>"

#~ msgid "<b>Offset:</b>"
#~ msgstr "<b>Offset:</b>"

#~ msgid "Combine"
#~ msgstr "Combine"

#~ msgid "<b>Tools Table</b>"
#~ msgstr "<b>Tools Table</b>"

#~ msgid ""
#~ "Tool height just before starting the work.\n"
#~ "Delete the value if you don't need this feature."
#~ msgstr ""
#~ "Tool height just before starting the work.\n"
#~ "Delete the value if you don't need this feature."

#~ msgid ""
#~ "Z-axis position (height) for\n"
#~ "the last move."
#~ msgstr ""
#~ "Z-axis position (height) for\n"
#~ "the last move."

#~ msgid ""
#~ "The json file that dictates\n"
#~ "gcode output."
#~ msgstr ""
#~ "The json file that dictates\n"
#~ "gcode output."

#~ msgid "<b>Type:    </b>"
#~ msgstr "<b>Type:    </b>"

#~ msgid "Drills Tool dia:"
#~ msgstr "Drills Tool dia:"

#~ msgid "Slots Tool dia:"
#~ msgstr "Slots Tool dia:"

#~ msgid "<b>Tool Dia:</b>"
#~ msgstr "<b>Tool Dia:</b>"

#~ msgid "<b>Tool Data</b>"
#~ msgstr "<b>Tool Data</b>"

#~ msgid ""
#~ "This is the height (Z) at which the CNC\n"
#~ "will go as the last move."
#~ msgstr ""
#~ "This is the height (Z) at which the CNC\n"
#~ "will go as the last move."

#~ msgid "Feed Rate Z (Plunge):"
#~ msgstr "Feed Rate Z (Plunge):"

#~ msgid ""
#~ "Cutting speed in the Z\n"
#~ "plane in units per minute"
#~ msgstr ""
#~ "Cutting speed in the Z\n"
#~ "plane in units per minute"

#~ msgid ""
#~ "Cutting speed in the XY\n"
#~ "plane in units per minute\n"
#~ "(in units per minute).\n"
#~ "This is for the rapid move G00.\n"
#~ "It is useful only for Marlin,\n"
#~ "ignore for any other cases."
#~ msgstr ""
#~ "Cutting speed in the XY\n"
#~ "plane in units per minute\n"
#~ "(in units per minute).\n"
#~ "This is for the rapid move G00.\n"
#~ "It is useful only for Marlin,\n"
#~ "ignore for any other cases."

#~ msgid "Cut over 1st pt"
#~ msgstr "Cut over 1st pt"

#~ msgid "<b>Paint Area:</b>"
#~ msgstr "<b>Paint Area:</b>"

#~ msgid "<b>CNC Tools Table</b>"
#~ msgstr "<b>CNC Tools Table</b>"

#~ msgid ""
#~ "Type here any G-Code commands you would\n"
#~ "like to add to the beginning of the generated file."
#~ msgstr ""
#~ "Type here any G-Code commands you would\n"
#~ "like to add to the beginning of the generated file."

#~ msgid ""
#~ "This is the diameter of the tool tip.\n"
#~ "The manufacturer specifies it."
#~ msgstr ""
#~ "This is the diameter of the tool tip.\n"
#~ "The manufacturer specifies it."

#~ msgid "Object:"
#~ msgstr "Object:"

#~ msgid "Units:"
#~ msgstr "Units:"

#~ msgid ""
#~ "- 'Itself': the non copper clearing extent\n"
#~ "is based on the object that is copper cleared.\n"
#~ " - 'Box': will do non copper clearing within the box\n"
#~ "specified by the object selected in the Ref. Object combobox."
#~ msgstr ""
#~ "- 'Itself': the non copper clearing extent\n"
#~ "is based on the object that is copper cleared.\n"
#~ " - 'Box': will do non copper clearing within the box\n"
#~ "specified by the object selected in the Ref. Object combobox."

#~ msgid "Geometry:"
#~ msgstr "Geometry:"

#~ msgid ""
#~ "Scale the selected object(s)\n"
#~ "using the Scale Factor X for both axis."
#~ msgstr ""
#~ "Scale the selected object(s)\n"
#~ "using the Scale Factor X for both axis."

#~ msgid "<b>Excellon Format:</b>"
#~ msgstr "<b>Excellon Format:</b>"

#~ msgid "<b>Tools:</b>"
#~ msgstr "<b>Tools:</b>"

#~ msgid "<b>Export G-Code:</b>"
#~ msgstr "<b>Export G-Code:</b>"

#~ msgid "How to select the polygons to paint."
#~ msgstr "How to select the polygons to paint."

#~ msgid "<b>V-Shape Tool Calculator:</b>"
#~ msgstr "<b>V-Shape Tool Calculator:</b>"

#~ msgid "<b>ElectroPlating Calculator:</b>"
#~ msgstr "<b>ElectroPlating Calculator:</b>"

#~ msgid "<b>Name:</b>"
#~ msgstr "<b>Name:</b>"

#~ msgid "<b>Plot kind:</b>"
#~ msgstr "<b>Plot kind:</b>"

#~ msgid "<b>Display Annotation:</b>"
#~ msgstr "<b>Display Annotation:</b>"

#~ msgid "<b>GERBER:</b>"
#~ msgstr "<b>GERBER:</b>"

#~ msgid "<b>EXCELLON:</b>"
#~ msgstr "<b>EXCELLON:</b>"

#~ msgid "<b>GEOMETRY</b>:"
#~ msgstr "<b>GEOMETRY</b>:"

#~ msgid "<b>Panel Type:</b>"
#~ msgstr "<b>Panel Type:</b>"

#~ msgid "<b>Excellon format:</b>"
#~ msgstr "<b>Excellon format:</b>"

#~ msgid "<b>Gerber Objects</b>"
#~ msgstr "<b>Gerber Objects</b>"

#~ msgid "<b>Geometry Objects</b>"
#~ msgstr "<b>Geometry Objects</b>"

#~ msgid "Save &Defaults"
#~ msgstr "Save &Defaults"

#~ msgid "Line"
#~ msgstr "Line"

#~ msgid "Tool dia:                   "
#~ msgstr "Tool dia:                   "

#~ msgid ""
#~ "The diameter of the cutting\n"
#~ "tool.."
#~ msgstr ""
#~ "The diameter of the cutting\n"
#~ "tool.."

#~ msgid "Disable"
#~ msgstr "Disable"

#~ msgid "[WARNING_NOTCL] Move cancelled. No shape selected."
#~ msgstr "[WARNING_NOTCL] Move cancelled. No shape selected."

#~ msgid "Click on the Destination point..."
#~ msgstr "Click on the Destination point..."

#~ msgid "Copy as &Geom"
#~ msgstr "Copy as &Geom"

#~ msgid "Ap. Scale Factor:"
#~ msgstr "Ap. Scale Factor:"

#~ msgid ""
#~ "Change the size of the selected apertures.\n"
#~ "Factor by which to multiply\n"
#~ "geometric features of this object."
#~ msgstr ""
#~ "Change the size of the selected apertures.\n"
#~ "Factor by which to multiply\n"
#~ "geometric features of this object."

#~ msgid "Ap. Buffer Factor:"
#~ msgstr "Ap. Buffer Factor:"

#~ msgid ""
#~ "Change the size of the selected apertures.\n"
#~ "Factor by which to expand/shrink\n"
#~ "geometric features of this object."
#~ msgstr ""
#~ "Change the size of the selected apertures.\n"
#~ "Factor by which to expand/shrink\n"
#~ "geometric features of this object."

#~ msgid "In"
#~ msgstr "In"

#~ msgid "Out"
#~ msgstr "Out"

#~ msgid "Custom"
#~ msgstr "Custom"

#~ msgid "Pos"
#~ msgstr "Pos"

#~ msgid "Neg"
#~ msgstr "Neg"

#~ msgid "Solid   "
#~ msgstr "Solid   "

#~ msgid "M-Color   "
#~ msgstr "M-Color   "

#~ msgid "Click on CENTER ..."
#~ msgstr "Click on CENTER ..."

#~ msgid "[success] Done. Region completed."
#~ msgstr "[success] Done. Region completed."

#~ msgid "Del Aperture:"
#~ msgstr "Del Aperture:"

#~ msgid ""
#~ "Delete a aperture in the aperture list.\n"
#~ "It will delete also the associated geometry."
#~ msgstr ""
#~ "Delete a aperture in the aperture list.\n"
#~ "It will delete also the associated geometry."

#~ msgid "Save && Close Edit"
#~ msgstr "Save && Close Edit"

#~ msgid ""
#~ "<b>Editor Shortcut list</b><br>\n"
#~ "            <br>\n"
#~ "            <strong><span style=\"color:#0000ff\">GEOMETRY EDITOR</span></"
#~ "strong><br>\n"
#~ "    \n"
#~ "            <table border=\"0\" cellpadding=\"0\" cellspacing=\"0\" style="
#~ "\"width:283px\">\n"
#~ "                <tbody>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\" width=\"89\"><strong>A</"
#~ "strong></td>\n"
#~ "                        <td width=\"194\">&nbsp;Draw an Arc</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>B</strong></td>\n"
#~ "                        <td>&nbsp;Buffer Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>C</strong></td>\n"
#~ "                        <td>&nbsp;Copy Geo Item</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>E</strong></td>\n"
#~ "                        <td>&nbsp;Polygon Intersection Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>I</strong></td>\n"
#~ "                        <td>&nbsp;Paint Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>J</strong></td>\n"
#~ "                        <td>&nbsp;Jump to Location (x, y)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>K</strong></td>\n"
#~ "                        <td>&nbsp;Toggle Corner Snap</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>M</strong></td>\n"
#~ "                        <td>&nbsp;Move Geo Item</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>N</strong></td>\n"
#~ "                        <td>&nbsp;Draw a Polygon</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>O</strong></td>\n"
#~ "                        <td>&nbsp;Draw a Circle</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>P</strong></td>\n"
#~ "                        <td>&nbsp;Draw a Path</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>R</strong></td>\n"
#~ "                        <td>&nbsp;Draw Rectangle</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>S</strong></td>\n"
#~ "                        <td>&nbsp;Polygon Substraction Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>T</strong></td>\n"
#~ "                        <td>&nbsp;Add Text Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>U</strong></td>\n"
#~ "                        <td>&nbsp;Polygon Union Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>X</strong></td>\n"
#~ "                        <td>&nbsp;Flip shape on X axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Y</strong></td>\n"
#~ "                        <td>&nbsp;Flip shape on Y axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>SHIFT+X</strong></td>\n"
#~ "                        <td>&nbsp;Skew shape on X axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>SHIFT+Y</strong></td>\n"
#~ "                        <td>&nbsp;Skew shape on Y axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+R</strong></td>\n"
#~ "                        <td>&nbsp;Editor Transformation Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+X</strong></td>\n"
#~ "                        <td>&nbsp;Offset shape on X axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+Y</strong></td>\n"
#~ "                        <td>&nbsp;Offset shape on Y axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>CTRL+M</strong></td>\n"
#~ "                        <td>&nbsp;Measurement Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>CTRL+S</strong></td>\n"
#~ "                        <td>&nbsp;Save Object and Exit Editor</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>CTRL+X</strong></td>\n"
#~ "                        <td>&nbsp;Polygon Cut Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Space</strong></td>\n"
#~ "                        <td>&nbsp;Rotate Geometry</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ENTER</strong></td>\n"
#~ "                        <td>&nbsp;Finish drawing for certain tools</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ESC</strong></td>\n"
#~ "                        <td>&nbsp;Abort and return to Select</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Del</strong></td>\n"
#~ "                        <td>&nbsp;Delete Shape</td>\n"
#~ "                    </tr>\n"
#~ "                </tbody>\n"
#~ "            </table>\n"
#~ "            <br>\n"
#~ "            <br>\n"
#~ "            <strong><span style=\"color:#ff0000\">EXCELLON EDITOR</span></"
#~ "strong><br>\n"
#~ "            <table border=\"0\" cellpadding=\"0\" cellspacing=\"0\" style="
#~ "\"width:283px\">\n"
#~ "                <tbody>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\" width=\"89\"><strong>A</"
#~ "strong></td>\n"
#~ "                        <td width=\"194\">&nbsp;Add Drill Array</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>C</strong></td>\n"
#~ "                        <td>&nbsp;Copy Drill(s)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>D</strong></td>\n"
#~ "                        <td>&nbsp;Add Drill</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>J</strong></td>\n"
#~ "                        <td>&nbsp;Jump to Location (x, y)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>M</strong></td>\n"
#~ "                        <td>&nbsp;Move Drill(s)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>R</strong></td>\n"
#~ "                        <td>&nbsp;Resize Drill(s)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>T</strong></td>\n"
#~ "                        <td>&nbsp;Add a new Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Del</strong></td>\n"
#~ "                        <td>&nbsp;Delete Drill(s)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Del</strong></td>\n"
#~ "                        <td>&nbsp;Alternate: Delete Tool(s)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ESC</strong></td>\n"
#~ "                        <td>&nbsp;Abort and return to Select</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>CTRL+S</strong></td>\n"
#~ "                        <td>&nbsp;Save Object and Exit Editor</td>\n"
#~ "                    </tr>\n"
#~ "                </tbody>\n"
#~ "            </table>\n"
#~ "                    "
#~ msgstr ""
#~ "<b>Editor Shortcut list</b><br>\n"
#~ "            <br>\n"
#~ "            <strong><span style=\"color:#0000ff\">GEOMETRY EDITOR</span></"
#~ "strong><br>\n"
#~ "    \n"
#~ "            <table border=\"0\" cellpadding=\"0\" cellspacing=\"0\" style="
#~ "\"width:283px\">\n"
#~ "                <tbody>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\" width=\"89\"><strong>A</"
#~ "strong></td>\n"
#~ "                        <td width=\"194\">&nbsp;Draw an Arc</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>B</strong></td>\n"
#~ "                        <td>&nbsp;Buffer Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>C</strong></td>\n"
#~ "                        <td>&nbsp;Copy Geo Item</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>E</strong></td>\n"
#~ "                        <td>&nbsp;Polygon Intersection Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>I</strong></td>\n"
#~ "                        <td>&nbsp;Paint Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>J</strong></td>\n"
#~ "                        <td>&nbsp;Jump to Location (x, y)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>K</strong></td>\n"
#~ "                        <td>&nbsp;Toggle Corner Snap</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>M</strong></td>\n"
#~ "                        <td>&nbsp;Move Geo Item</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>N</strong></td>\n"
#~ "                        <td>&nbsp;Draw a Polygon</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>O</strong></td>\n"
#~ "                        <td>&nbsp;Draw a Circle</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>P</strong></td>\n"
#~ "                        <td>&nbsp;Draw a Path</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>R</strong></td>\n"
#~ "                        <td>&nbsp;Draw Rectangle</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>S</strong></td>\n"
#~ "                        <td>&nbsp;Polygon Substraction Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>T</strong></td>\n"
#~ "                        <td>&nbsp;Add Text Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>U</strong></td>\n"
#~ "                        <td>&nbsp;Polygon Union Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>X</strong></td>\n"
#~ "                        <td>&nbsp;Flip shape on X axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Y</strong></td>\n"
#~ "                        <td>&nbsp;Flip shape on Y axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>SHIFT+X</strong></td>\n"
#~ "                        <td>&nbsp;Skew shape on X axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>SHIFT+Y</strong></td>\n"
#~ "                        <td>&nbsp;Skew shape on Y axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+R</strong></td>\n"
#~ "                        <td>&nbsp;Editor Transformation Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+X</strong></td>\n"
#~ "                        <td>&nbsp;Offset shape on X axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+Y</strong></td>\n"
#~ "                        <td>&nbsp;Offset shape on Y axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>CTRL+M</strong></td>\n"
#~ "                        <td>&nbsp;Measurement Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>CTRL+S</strong></td>\n"
#~ "                        <td>&nbsp;Save Object and Exit Editor</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>CTRL+X</strong></td>\n"
#~ "                        <td>&nbsp;Polygon Cut Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Space</strong></td>\n"
#~ "                        <td>&nbsp;Rotate Geometry</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ENTER</strong></td>\n"
#~ "                        <td>&nbsp;Finish drawing for certain tools</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ESC</strong></td>\n"
#~ "                        <td>&nbsp;Abort and return to Select</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Del</strong></td>\n"
#~ "                        <td>&nbsp;Delete Shape</td>\n"
#~ "                    </tr>\n"
#~ "                </tbody>\n"
#~ "            </table>\n"
#~ "            <br>\n"
#~ "            <br>\n"
#~ "            <strong><span style=\"color:#ff0000\">EXCELLON EDITOR</span></"
#~ "strong><br>\n"
#~ "            <table border=\"0\" cellpadding=\"0\" cellspacing=\"0\" style="
#~ "\"width:283px\">\n"
#~ "                <tbody>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\" width=\"89\"><strong>A</"
#~ "strong></td>\n"
#~ "                        <td width=\"194\">&nbsp;Add Drill Array</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>C</strong></td>\n"
#~ "                        <td>&nbsp;Copy Drill(s)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>D</strong></td>\n"
#~ "                        <td>&nbsp;Add Drill</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>J</strong></td>\n"
#~ "                        <td>&nbsp;Jump to Location (x, y)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>M</strong></td>\n"
#~ "                        <td>&nbsp;Move Drill(s)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>R</strong></td>\n"
#~ "                        <td>&nbsp;Resize Drill(s)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>T</strong></td>\n"
#~ "                        <td>&nbsp;Add a new Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Del</strong></td>\n"
#~ "                        <td>&nbsp;Delete Drill(s)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Del</strong></td>\n"
#~ "                        <td>&nbsp;Alternate: Delete Tool(s)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ESC</strong></td>\n"
#~ "                        <td>&nbsp;Abort and return to Select</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>CTRL+S</strong></td>\n"
#~ "                        <td>&nbsp;Save Object and Exit Editor</td>\n"
#~ "                    </tr>\n"
#~ "                </tbody>\n"
#~ "            </table>\n"
#~ "                    "

#~ msgid "[ERROR_NOTCL]Could not load defaults file."
#~ msgstr "[ERROR_NOTCL]Could not load defaults file."

#~ msgid ""
#~ "[ERROR_NOTCL] The aperture scale factor value is missing or wrong format."
#~ msgstr ""
#~ "[ERROR_NOTCL] The aperture scale factor value is missing or wrong format."

#~ msgid "[WARNING_NOTCL]Export Machine Code cancelled ..."
#~ msgstr "[WARNING_NOTCL]Export Machine Code cancelled ..."

#~ msgid "[success] GUI settings deleted ..."
#~ msgstr "[success] GUI settings deleted ..."

#~ msgid "Scale Factor:"
#~ msgstr "Scale Factor:"

#~ msgid "Buffer Factor:"
#~ msgstr "Buffer Factor:"

#~ msgid "<b>Generate new Gerber Object:</b>"
#~ msgstr "<b>Generate new Gerber Object:</b>"

#~ msgid "Will generate a new Gerber object from the changed apertures."
#~ msgstr "Will generate a new Gerber object from the changed apertures."

#~ msgid ""
#~ "Will generate a new Gerber object from the changed apertures.\n"
#~ "This new object can then be isolated etc."
#~ msgstr ""
#~ "Will generate a new Gerber object from the changed apertures.\n"
#~ "This new object can then be isolated etc."

#~ msgid "[success]Offset on the %s axis done ..."
#~ msgstr "[success]Offset on the %s axis done ..."

#~ msgid ""
#~ "How much (fraction) of the tool width to overlap each tool pass.\n"
#~ "Example:\n"
#~ "A value here of 0.25 means 25\\% from the tool diameter found above.\n"
#~ "\n"
#~ "Adjust the value starting with lower values\n"
#~ "and increasing it if areas that should be painted are still \n"
#~ "not painted.\n"
#~ "Lower values = faster processing, faster execution on PCB.\n"
#~ "Higher values = slow processing and slow execution on CNC\n"
#~ "due of too many paths."
#~ msgstr ""
#~ "How much (fraction) of the tool width to overlap each tool pass.\n"
#~ "Example:\n"
#~ "A value here of 0.25 means 25\\% from the tool diameter found above.\n"
#~ "\n"
#~ "Adjust the value starting with lower values\n"
#~ "and increasing it if areas that should be painted are still \n"
#~ "not painted.\n"
#~ "Lower values = faster processing, faster execution on PCB.\n"
#~ "Higher values = slow processing and slow execution on CNC\n"
#~ "due of too many paths."

#~| msgid "z_toolchange = Z coord for Toolchange"
#~ msgid "z_move = Z coord for Toolchange"
#~ msgstr "z_move = Z coord for Toolchange"

#~ msgid "%s/Project_%s"
#~ msgstr "%s/Project_%s"

#~ msgid "tool_tab"
#~ msgstr "tool_tab"