FlatCAM/locale/ro/LC_MESSAGES/strings.po

# SOME DESCRIPTIVE TITLE.
# Copyright (C) YEAR ORGANIZATION
# FIRST AUTHOR <EMAIL@ADDRESS>, YEAR.
#
msgid ""
msgstr ""
"Project-Id-Version: \n"
"POT-Creation-Date: 2020-05-18 19:21+0300\n"
"PO-Revision-Date: 2020-05-18 19:21+0300\n"
"Last-Translator: \n"
"Language-Team: \n"
"Language: ro\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Generated-By: pygettext.py 1.5\n"
"X-Generator: Poedit 2.3.1\n"
"Plural-Forms: nplurals=3; plural=(n==1 ? 0 : n==0 || (n!=1 && n%100>=1 && n"
"%100<=19) ? 1 : 2);\n"
"X-Poedit-Basepath: ../../..\n"
"X-Poedit-SearchPath-0: .\n"
"X-Poedit-SearchPathExcluded-0: build\n"
"X-Poedit-SearchPathExcluded-1: tests\n"
"X-Poedit-SearchPathExcluded-2: doc\n"

#: AppDatabase.py:86
msgid "Add Geometry Tool in DB"
msgstr "Adăugați Unealta de Geometrie în DB"

#: AppDatabase.py:88 AppDatabase.py:1643
msgid ""
"Add a new tool in the Tools Database.\n"
"It will be used in the Geometry UI.\n"
"You can edit it after it is added."
msgstr ""
"Adăugați o unealtă nouă în baza de date.\n"
"Acesta va fi utilizată în UI de Geometrie.\n"
"O puteți edita după ce este adăugată."

#: AppDatabase.py:102 AppDatabase.py:1657
msgid "Delete Tool from DB"
msgstr "Ștergeți unealta din DB"

#: AppDatabase.py:104 AppDatabase.py:1659
msgid "Remove a selection of tools in the Tools Database."
msgstr "Stergeți o selecție de Unelte din baza de date Unelte."

#: AppDatabase.py:108 AppDatabase.py:1663
msgid "Export DB"
msgstr "Exportă DB"

#: AppDatabase.py:110 AppDatabase.py:1665
msgid "Save the Tools Database to a custom text file."
msgstr "Salvați baza de date Unelte într-un fișier text."

#: AppDatabase.py:114 AppDatabase.py:1669
msgid "Import DB"
msgstr "Importă DB"

#: AppDatabase.py:116 AppDatabase.py:1671
msgid "Load the Tools Database information's from a custom text file."
msgstr "Încărcați informațiile din baza de date Unelte dintr-un fișier text."

#: AppDatabase.py:120 AppDatabase.py:1681
msgid "Add Tool from Tools DB"
msgstr "Adăugați Unealta din DB Unelte"

#: AppDatabase.py:122 AppDatabase.py:1683
msgid ""
"Add a new tool in the Tools Table of the\n"
"active Geometry object after selecting a tool\n"
"in the Tools Database."
msgstr ""
"Adăugați o Unealta noua în Tabelul Unelte din\n"
"obiectul Geometrie activ după selectarea unei Unelte\n"
"în baza de date Unelte."

#: AppDatabase.py:128 AppDatabase.py:1689 AppGUI/MainGUI.py:1345
#: AppGUI/preferences/PreferencesUIManager.py:942 App_Main.py:2225
#: App_Main.py:3096 App_Main.py:3970 App_Main.py:4529 App_Main.py:6588
msgid "Cancel"
msgstr "Anuleaza"

#: AppDatabase.py:158 AppDatabase.py:833 AppDatabase.py:1087
msgid "Tool Name"
msgstr "Nume unealtă"

#: AppDatabase.py:159 AppDatabase.py:835 AppDatabase.py:1100
#: AppEditors/FlatCAMExcEditor.py:1604 AppGUI/ObjectUI.py:1447
#: AppGUI/ObjectUI.py:1685
#: AppGUI/preferences/tools/ToolsPaintPrefGroupUI.py:132
#: AppTools/ToolNCC.py:278 AppTools/ToolNCC.py:287 AppTools/ToolPaint.py:260
msgid "Tool Dia"
msgstr "Dia Unealtă"

#: AppDatabase.py:160 AppDatabase.py:837 AppDatabase.py:1281
#: AppGUI/ObjectUI.py:1660
msgid "Tool Offset"
msgstr "Ofset unealtă"

#: AppDatabase.py:161 AppDatabase.py:839 AppDatabase.py:1298
msgid "Custom Offset"
msgstr "Ofset Personalizat"

#: AppDatabase.py:162 AppDatabase.py:841 AppDatabase.py:1265
#: AppGUI/ObjectUI.py:309
#: AppGUI/preferences/gerber/GerberAdvOptPrefGroupUI.py:67
#: AppGUI/preferences/tools/ToolsNCCPrefGroupUI.py:53
#: AppGUI/preferences/tools/ToolsPaintPrefGroupUI.py:62
#: AppGUI/preferences/tools/ToolsPaintPrefGroupUI.py:72 AppTools/ToolNCC.py:213
#: AppTools/ToolNCC.py:227 AppTools/ToolPaint.py:195
msgid "Tool Type"
msgstr "Tip Unealtă"

#: AppDatabase.py:163 AppDatabase.py:843 AppDatabase.py:1113
msgid "Tool Shape"
msgstr "Formă unealtă"

#: AppDatabase.py:164 AppDatabase.py:846 AppDatabase.py:1129
#: AppGUI/ObjectUI.py:350 AppGUI/ObjectUI.py:900 AppGUI/ObjectUI.py:1805
#: AppGUI/ObjectUI.py:2466
#: AppGUI/preferences/excellon/ExcellonOptPrefGroupUI.py:93
#: AppGUI/preferences/geometry/GeometryOptPrefGroupUI.py:48
#: AppGUI/preferences/gerber/GerberAdvOptPrefGroupUI.py:107
#: AppGUI/preferences/tools/ToolsCalculatorsPrefGroupUI.py:78
#: AppGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:58
#: AppGUI/preferences/tools/ToolsNCCPrefGroupUI.py:98
#: AppGUI/preferences/tools/ToolsPaintPrefGroupUI.py:105
#: AppGUI/preferences/tools/ToolsPaintPrefGroupUI.py:113
#: AppTools/ToolCalculators.py:114 AppTools/ToolCutOut.py:138
#: AppTools/ToolNCC.py:260 AppTools/ToolNCC.py:268 AppTools/ToolPaint.py:242
msgid "Cut Z"
msgstr "Z tăiere"

#: AppDatabase.py:165 AppDatabase.py:848 AppDatabase.py:1143
msgid "MultiDepth"
msgstr "Multi-Pas"

#: AppDatabase.py:166 AppDatabase.py:850 AppDatabase.py:1156
msgid "DPP"
msgstr "DPP"

#: AppDatabase.py:167 AppDatabase.py:852 AppDatabase.py:1312
msgid "V-Dia"
msgstr "V-Dia"

#: AppDatabase.py:168 AppDatabase.py:854 AppDatabase.py:1326
msgid "V-Angle"
msgstr "V-Unghi"

#: AppDatabase.py:169 AppDatabase.py:856 AppDatabase.py:1170
#: AppGUI/ObjectUI.py:946 AppGUI/ObjectUI.py:1852
#: AppGUI/preferences/excellon/ExcellonOptPrefGroupUI.py:134
#: AppGUI/preferences/geometry/GeometryOptPrefGroupUI.py:101
#: AppGUI/preferences/tools/Tools2CalPrefGroupUI.py:61
#: AppObjects/FlatCAMExcellon.py:1396 AppObjects/FlatCAMGeometry.py:1660
#: AppTools/ToolCalibration.py:74
msgid "Travel Z"
msgstr "Z Deplasare"

#: AppDatabase.py:170 AppDatabase.py:858
msgid "FR"
msgstr "Feedrate"

#: AppDatabase.py:171 AppDatabase.py:860
msgid "FR Z"
msgstr "Z feedrate"

#: AppDatabase.py:172 AppDatabase.py:862 AppDatabase.py:1340
msgid "FR Rapids"
msgstr "Feedrate rapizi"

#: AppDatabase.py:173 AppDatabase.py:864 AppDatabase.py:1213
#: AppGUI/preferences/excellon/ExcellonOptPrefGroupUI.py:222
msgid "Spindle Speed"
msgstr "Viteza Motor"

#: AppDatabase.py:174 AppDatabase.py:866 AppDatabase.py:1228
#: AppGUI/ObjectUI.py:1064 AppGUI/ObjectUI.py:1959
msgid "Dwell"
msgstr "Pauza"

#: AppDatabase.py:175 AppDatabase.py:868 AppDatabase.py:1241
msgid "Dwelltime"
msgstr "Durata pauza"

#: AppDatabase.py:176 AppDatabase.py:870 AppGUI/ObjectUI.py:2116
#: AppGUI/preferences/excellon/ExcellonOptPrefGroupUI.py:257
#: AppGUI/preferences/geometry/GeometryOptPrefGroupUI.py:254
#: AppGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:237
#: AppTools/ToolSolderPaste.py:335
msgid "Preprocessor"
msgstr "Postprocesor"

#: AppDatabase.py:177 AppDatabase.py:872 AppDatabase.py:1356
msgid "ExtraCut"
msgstr "Extra taiere"

#: AppDatabase.py:178 AppDatabase.py:874 AppDatabase.py:1371
msgid "E-Cut Length"
msgstr "Lungime E-taiere"

#: AppDatabase.py:179 AppDatabase.py:876
msgid "Toolchange"
msgstr "Schimb unealtă"

#: AppDatabase.py:180 AppDatabase.py:878
msgid "Toolchange XY"
msgstr "X,Y schimb unealtă"

#: AppDatabase.py:181 AppDatabase.py:880
#: AppGUI/preferences/excellon/ExcellonOptPrefGroupUI.py:160
#: AppGUI/preferences/geometry/GeometryOptPrefGroupUI.py:131
#: AppGUI/preferences/tools/Tools2CalPrefGroupUI.py:98
#: AppTools/ToolCalibration.py:111
msgid "Toolchange Z"
msgstr "Z schimb. unealtă"

#: AppDatabase.py:182 AppDatabase.py:882 AppGUI/ObjectUI.py:1193
#: AppGUI/preferences/excellon/ExcellonAdvOptPrefGroupUI.py:69
#: AppGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:54
msgid "Start Z"
msgstr "Z Start"

#: AppDatabase.py:183 AppDatabase.py:885
msgid "End Z"
msgstr "Z Oprire"

#: AppDatabase.py:187
msgid "Tool Index."
msgstr "Index unealta."

#: AppDatabase.py:189 AppDatabase.py:1089
msgid ""
"Tool name.\n"
"This is not used in the app, it's function\n"
"is to serve as a note for the user."
msgstr ""
"Numele uneltei.\n"
"Aceasta nu este folosită în aplicație, funcția sa\n"
"este să servească drept notă pentru utilizator."

#: AppDatabase.py:193 AppDatabase.py:1102
msgid "Tool Diameter."
msgstr "Diametru unealtă."

#: AppDatabase.py:195 AppDatabase.py:1283
msgid ""
"Tool Offset.\n"
"Can be of a few types:\n"
"Path = zero offset\n"
"In = offset inside by half of tool diameter\n"
"Out = offset outside by half of tool diameter\n"
"Custom = custom offset using the Custom Offset value"
msgstr ""
"Offset-ul uneltei.\n"
"Poate fi de câteva tipuri:\n"
"Cale = decalare zero\n"
"Interior = compensat în interior cu jumătate din diametrul sculei\n"
"Exterior = compensat în exterior cu jumătate din diametrul sculei\n"
"Custom = compensare personalizată folosind valoarea Offset personalizat"

#: AppDatabase.py:202 AppDatabase.py:1300
msgid ""
"Custom Offset.\n"
"A value to be used as offset from the current path."
msgstr ""
"Ofset personalizat.\n"
"O valoare care trebuie utilizată ca compensare din Calea curentă."

#: AppDatabase.py:205 AppDatabase.py:1267
msgid ""
"Tool Type.\n"
"Can be:\n"
"Iso = isolation cut\n"
"Rough = rough cut, low feedrate, multiple passes\n"
"Finish = finishing cut, high feedrate"
msgstr ""
"Tip uneltei.\n"
"Poate fi:\n"
"Iso = tăiere de izolare\n"
"Aspră = tăietură aspră, viteză scăzută, treceri multiple\n"
"Finisare = tăiere de finisare, avans mare"

#: AppDatabase.py:211 AppDatabase.py:1115
msgid ""
"Tool Shape. \n"
"Can be:\n"
"C1 ... C4 = circular tool with x flutes\n"
"B = ball tip milling tool\n"
"V = v-shape milling tool"
msgstr ""
"Forma uneltei.\n"
"Poate fi:\n"
"C1 ... C4 = unealtă circulară cu x dinti\n"
"B = instrument de frezare cu vârf formal bila\n"
"V = instrument de frezare în formă V"

#: AppDatabase.py:217 AppDatabase.py:1131
msgid ""
"Cutting Depth.\n"
"The depth at which to cut into material."
msgstr ""
"Adâncimea de tăiere.\n"
"Adâncimea la care se taie în material."

#: AppDatabase.py:220 AppDatabase.py:1145
msgid ""
"Multi Depth.\n"
"Selecting this will allow cutting in multiple passes,\n"
"each pass adding a DPP parameter depth."
msgstr ""
"Adâncime multiplă\n"
"Selectarea acestui lucru va permite tăierea în mai multe treceri,\n"
"fiecare trecere adăugând o adâncime a parametrului DPP."

#: AppDatabase.py:224 AppDatabase.py:1158
msgid ""
"DPP. Depth per Pass.\n"
"The value used to cut into material on each pass."
msgstr ""
"DPP. Adâncimea pe trecere.\n"
"Valoarea folosită pentru a tăia în material la fiecare trecere."

#: AppDatabase.py:227 AppDatabase.py:1314
msgid ""
"V-Dia.\n"
"Diameter of the tip for V-Shape Tools."
msgstr ""
"V-Dia.\n"
"Diametrul vârfului pentru uneltele în formă de V."

#: AppDatabase.py:230 AppDatabase.py:1328
msgid ""
"V-Agle.\n"
"Angle at the tip for the V-Shape Tools."
msgstr ""
"V-Unghi.\n"
"Unghiul în vârf pentru instrumentele în formă de V."

#: AppDatabase.py:233 AppDatabase.py:1172
msgid ""
"Clearance Height.\n"
"Height at which the milling bit will travel between cuts,\n"
"above the surface of the material, avoiding all fixtures."
msgstr ""
"Înălțimea de Siguranta.\n"
"Înălțimea la care bitul de frezare va călători între tăieturi,\n"
"deasupra suprafeței materialului, evitând toate accesoriile."

#: AppDatabase.py:237
msgid ""
"FR. Feedrate\n"
"The speed on XY plane used while cutting into material."
msgstr ""
"FR. Avans.\n"
"Viteza pe planul XY utilizat la tăierea în material."

#: AppDatabase.py:240
msgid ""
"FR Z. Feedrate Z\n"
"The speed on Z plane."
msgstr ""
"FR Z. Feedrate Z. Avans Z.\n"
"Viteza de deplasare in planul Z."

#: AppDatabase.py:243 AppDatabase.py:1342
msgid ""
"FR Rapids. Feedrate Rapids\n"
"Speed used while moving as fast as possible.\n"
"This is used only by some devices that can't use\n"
"the G0 g-code command. Mostly 3D printers."
msgstr ""
"FR Rapid. Feedrate Rapids. Avans Rapid.\n"
"Viteza folosită în timpul deplasarii pe cât mai repede posibil.\n"
"Acesta este folosit doar de unele dispozitive in care nu poate fi utilizata\n"
"comanda G-cod G0. În mare parte este vorda de imprimante 3D."

#: AppDatabase.py:248 AppDatabase.py:1215
msgid ""
"Spindle Speed.\n"
"If it's left empty it will not be used.\n"
"The speed of the spindle in RPM."
msgstr ""
"Viteza motorului.\n"
"Dacă este lăsat gol, nu va fi folosit.\n"
"Viteza rotorului în RPM."

#: AppDatabase.py:252 AppDatabase.py:1230
msgid ""
"Dwell.\n"
"Check this if a delay is needed to allow\n"
"the spindle motor to reach it's set speed."
msgstr ""
"Pauză.\n"
"Verificați dacă este necesară o întârziere pentru a permite\n"
"motorului sa ajungă la viteza setată."

#: AppDatabase.py:256 AppDatabase.py:1243
msgid ""
"Dwell Time.\n"
"A delay used to allow the motor spindle reach it's set speed."
msgstr ""
"Durata pauzei.\n"
"O întârziere pentru a permite motorului sa ajungă la viteza setată."

#: AppDatabase.py:259
msgid ""
"Preprocessor.\n"
"A selection of files that will alter the generated G-code\n"
"to fit for a number of use cases."
msgstr ""
"Preprocesorul.\n"
"O selecție de fișiere care vor modifica codul G generat\n"
"pentru a se potrivi pentru o serie de cazuri de utilizare."

#: AppDatabase.py:263 AppDatabase.py:1358
msgid ""
"Extra Cut.\n"
"If checked, after a isolation is finished an extra cut\n"
"will be added where the start and end of isolation meet\n"
"such as that this point is covered by this extra cut to\n"
"ensure a complete isolation."
msgstr ""
"Taietura suplimentara\n"
"Dacă este bifat, după terminarea izolării, tăieri suplimentare\n"
"vor fi adăugate acolo unde se întâlnesc începutul și sfârșitul izolării\n"
"astfel că acest punct este acoperit de aceste tăieri suplimentare si\n"
"asigură o izolare completă."

#: AppDatabase.py:269 AppDatabase.py:1373
msgid ""
"Extra Cut length.\n"
"If checked, after a isolation is finished an extra cut\n"
"will be added where the start and end of isolation meet\n"
"such as that this point is covered by this extra cut to\n"
"ensure a complete isolation. This is the length of\n"
"the extra cut."
msgstr ""
"Lungime suplimentară tăiată\n"
"Dacă este bifat, după terminarea izolării, tăieri suplimentare\n"
"vor fi adăugate acolo unde se întâlnesc începutul și sfârșitul izolării\n"
"astfel că acest punct este acoperit de aceste tăieri suplimentare si\n"
"asigură o izolare completă."

#: AppDatabase.py:276
msgid ""
"Toolchange.\n"
"It will create a toolchange event.\n"
"The kind of toolchange is determined by\n"
"the preprocessor file."
msgstr ""
"Schimbarea Uneltei.\n"
"Va crea un eveniment de schimbare a uneltelor.\n"
"Tipul schimbului de unelte este determinat de\n"
"fișierul preprocesor."

#: AppDatabase.py:281
msgid ""
"Toolchange XY.\n"
"A set of coordinates in the format (x, y).\n"
"Will determine the cartesian position of the point\n"
"where the tool change event take place."
msgstr ""
"Schimb de unelte - locatia XY.\n"
"Un set de coordonate în format (x, y).\n"
"Va determina poziția carteziană a punctului\n"
"unde are loc evenimentul schimbării instrumentelor."

#: AppDatabase.py:286
msgid ""
"Toolchange Z.\n"
"The position on Z plane where the tool change event take place."
msgstr ""
"Schimb de unelte - locatia Z.\n"
"Poziția in planul Z unde are loc evenimentul de schimbare a sculei."

#: AppDatabase.py:289
msgid ""
"Start Z.\n"
"If it's left empty it will not be used.\n"
"A position on Z plane to move immediately after job start."
msgstr ""
"Z Start.\n"
"Dacă este lăsat gol, nu va fi folosit.\n"
"O poziție pe planul Z pentru a se deplasa imediat după începerea lucrului."

#: AppDatabase.py:293
msgid ""
"End Z.\n"
"A position on Z plane to move immediately after job stop."
msgstr ""
"Z Sfârșit.\n"
"O poziție pe planul Z pentru a se deplasa imediat după oprirea executiei."

#: AppDatabase.py:305 AppDatabase.py:682 AppDatabase.py:716 AppDatabase.py:1898
#: AppDatabase.py:2144 AppDatabase.py:2178
msgid "Could not load Tools DB file."
msgstr "Nu s-a putut încărca fișierul DB Unelte."

#: AppDatabase.py:313 AppDatabase.py:724 AppDatabase.py:1906
#: AppDatabase.py:2186
msgid "Failed to parse Tools DB file."
msgstr "Eroare la analizarea fișierului DB Unelte."

#: AppDatabase.py:316 AppDatabase.py:727 AppDatabase.py:1909
#: AppDatabase.py:2189
msgid "Loaded FlatCAM Tools DB from"
msgstr "S-a incărcat DB Unelte din"

#: AppDatabase.py:322 AppDatabase.py:1823
msgid "Add to DB"
msgstr "Adăugați la DB Unelte"

#: AppDatabase.py:324 AppDatabase.py:1826
msgid "Copy from DB"
msgstr "Copiați din DB Unelte"

#: AppDatabase.py:326 AppDatabase.py:1829
msgid "Delete from DB"
msgstr "Ștergeți din DB Unelte"

#: AppDatabase.py:603 AppDatabase.py:2044
msgid "Tool added to DB."
msgstr "Unealtă adăugată in DB."

#: AppDatabase.py:624 AppDatabase.py:2077
msgid "Tool copied from Tools DB."
msgstr "Unealta a fost copiată din DB Unelte."

#: AppDatabase.py:642 AppDatabase.py:2104
msgid "Tool removed from Tools DB."
msgstr "Unealta a fost ștearsă din DB Unelte."

#: AppDatabase.py:653 AppDatabase.py:2115
msgid "Export Tools Database"
msgstr "Export DB Unelte"

#: AppDatabase.py:656 AppDatabase.py:2118
msgid "Tools_Database"
msgstr "DB Unelte"

#: AppDatabase.py:663 AppDatabase.py:709 AppDatabase.py:2125
#: AppDatabase.py:2171 AppEditors/FlatCAMExcEditor.py:1023
#: AppEditors/FlatCAMExcEditor.py:1091 AppEditors/FlatCAMTextEditor.py:223
#: AppGUI/MainGUI.py:2657 AppGUI/MainGUI.py:2873 AppGUI/MainGUI.py:3088
#: AppObjects/ObjectCollection.py:126 AppTools/ToolFilm.py:739
#: AppTools/ToolFilm.py:885 AppTools/ToolImage.py:247 AppTools/ToolMove.py:269
#: AppTools/ToolPcbWizard.py:301 AppTools/ToolPcbWizard.py:324
#: AppTools/ToolQRCode.py:791 AppTools/ToolQRCode.py:838 App_Main.py:1720
#: App_Main.py:2452 App_Main.py:2487 App_Main.py:2534 App_Main.py:4033
#: App_Main.py:6779 App_Main.py:6816 App_Main.py:6858 App_Main.py:6887
#: App_Main.py:6928 App_Main.py:6953 App_Main.py:7005 App_Main.py:7040
#: App_Main.py:7085 App_Main.py:7126 App_Main.py:7167 App_Main.py:7208
#: App_Main.py:7249 App_Main.py:7293 App_Main.py:7349 App_Main.py:7381
#: App_Main.py:7413 App_Main.py:7644 App_Main.py:7682 App_Main.py:7725
#: App_Main.py:7802 App_Main.py:7857 Bookmark.py:300 Bookmark.py:342
msgid "Cancelled."
msgstr "Anulat."

#: AppDatabase.py:671 AppDatabase.py:2133 AppEditors/FlatCAMTextEditor.py:276
#: AppObjects/FlatCAMCNCJob.py:959 AppTools/ToolFilm.py:1016
#: AppTools/ToolFilm.py:1197 AppTools/ToolSolderPaste.py:1534 App_Main.py:2542
#: App_Main.py:8101 App_Main.py:8149 App_Main.py:8274 App_Main.py:8410
#: Bookmark.py:308
msgid ""
"Permission denied, saving not possible.\n"
"Most likely another app is holding the file open and not accessible."
msgstr ""
"Permisiune refuzată, salvarea nu este posibilă.\n"
"Cel mai probabil o altă aplicație ține fișierul deschis și inaccesibil."

#: AppDatabase.py:693 AppDatabase.py:696 AppDatabase.py:748 AppDatabase.py:2155
#: AppDatabase.py:2158 AppDatabase.py:2211
msgid "Failed to write Tools DB to file."
msgstr "Eroare la scrierea DB Unelte în fișier."

#: AppDatabase.py:699 AppDatabase.py:2161
msgid "Exported Tools DB to"
msgstr "S-a exportat DB Unelte in"

#: AppDatabase.py:706 AppDatabase.py:2168
msgid "Import FlatCAM Tools DB"
msgstr "Importă DB Unelte"

#: AppDatabase.py:738 AppDatabase.py:913 AppDatabase.py:2200
#: AppDatabase.py:2418 AppObjects/FlatCAMGeometry.py:947
#: AppTools/ToolNCC.py:4015 AppTools/ToolNCC.py:4099 AppTools/ToolPaint.py:3558
#: AppTools/ToolPaint.py:3643 App_Main.py:5422 App_Main.py:5450
#: App_Main.py:5477 App_Main.py:5497
msgid "Tools Database"
msgstr "Baza de Date Unelte"

#: AppDatabase.py:752 AppDatabase.py:2215
msgid "Saved Tools DB."
msgstr "DB unelte salvată."

#: AppDatabase.py:899 AppDatabase.py:2405
msgid "No Tool/row selected in the Tools Database table"
msgstr "Nu a fost selectat nici-o Unealta / rând în tabela DB Unelte"

#: AppDatabase.py:917 AppDatabase.py:2422
msgid "Cancelled adding tool from DB."
msgstr "S-a anulat adăugarea de Unealtă din DB Unelte."

#: AppDatabase.py:1018
msgid "Basic Geo Parameters"
msgstr "Parametrii bază Geometrie"

#: AppDatabase.py:1030
msgid "Advanced Geo Parameters"
msgstr "Param. Avansați Geometrie"

#: AppDatabase.py:1042
msgid "NCC Parameters"
msgstr "Parametrii NCC"

#: AppDatabase.py:1054
msgid "Paint Parameters"
msgstr "Parametrii Paint"

#: AppDatabase.py:1185 AppGUI/ObjectUI.py:967 AppGUI/ObjectUI.py:1871
#: AppGUI/preferences/geometry/GeometryOptPrefGroupUI.py:185
#: AppGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:148
#: AppTools/ToolSolderPaste.py:253
msgid "Feedrate X-Y"
msgstr "Feedrate X-Y"

#: AppDatabase.py:1187
msgid ""
"Feedrate X-Y. Feedrate\n"
"The speed on XY plane used while cutting into material."
msgstr ""
"Avans X-Y. Avans.\n"
"Viteza pe planul XY utilizat la tăierea în material."

#: AppDatabase.py:1199 AppGUI/ObjectUI.py:982 AppGUI/ObjectUI.py:1885
#: AppGUI/preferences/excellon/ExcellonOptPrefGroupUI.py:207
#: AppGUI/preferences/geometry/GeometryOptPrefGroupUI.py:200
#: AppGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:161
#: AppTools/ToolSolderPaste.py:265
msgid "Feedrate Z"
msgstr "Feedrate Z"

#: AppDatabase.py:1201
msgid ""
"Feedrate Z\n"
"The speed on Z plane."
msgstr ""
"Feedrate Z. Avans Z.\n"
"Viteza de deplasare in planul Z."

#: AppDatabase.py:1399 AppGUI/ObjectUI.py:845
#: AppGUI/preferences/excellon/ExcellonOptPrefGroupUI.py:46
#: AppTools/ToolNCC.py:341
msgid "Operation"
msgstr "Operațiuni"

#: AppDatabase.py:1401 AppTools/ToolNCC.py:343
msgid ""
"The 'Operation' can be:\n"
"- Isolation -> will ensure that the non-copper clearing is always complete.\n"
"If it's not successful then the non-copper clearing will fail, too.\n"
"- Clear -> the regular non-copper clearing."
msgstr ""
"„Operațiunea” poate fi:\n"
"- Izolare -> se va asigura că curățarea non-cupru este întotdeauna "
"completă.\n"
"Dacă nu are succes, atunci curățarea din cupru nu va reuși.\n"
"- Curățare -> curățarea obișnuită de cupru."

#: AppDatabase.py:1408 AppEditors/FlatCAMGrbEditor.py:2740
#: AppGUI/GUIElements.py:2604 AppTools/ToolNCC.py:350
msgid "Clear"
msgstr "Șterge"

#: AppDatabase.py:1409 AppTools/ToolNCC.py:351 AppTools/ToolNCC.py:1624
msgid "Isolation"
msgstr "Tip de izolare"

#: AppDatabase.py:1417 AppGUI/ObjectUI.py:409 AppGUI/ObjectUI.py:867
#: AppGUI/preferences/excellon/ExcellonOptPrefGroupUI.py:62
#: AppGUI/preferences/geometry/GeometryEditorPrefGroupUI.py:56
#: AppGUI/preferences/gerber/GerberOptPrefGroupUI.py:95
#: AppGUI/preferences/tools/ToolsNCCPrefGroupUI.py:137 AppTools/ToolNCC.py:359
msgid "Milling Type"
msgstr "Tip Frezare"

#: AppDatabase.py:1419 AppDatabase.py:1427
#: AppGUI/preferences/tools/ToolsNCCPrefGroupUI.py:139
#: AppGUI/preferences/tools/ToolsNCCPrefGroupUI.py:147 AppTools/ToolNCC.py:361
#: AppTools/ToolNCC.py:369
msgid ""
"Milling type when the selected tool is of type: 'iso_op':\n"
"- climb / best for precision milling and to reduce tool usage\n"
"- conventional / useful when there is no backlash compensation"
msgstr ""
"Tipul de frezare cand unealta selectată este de tipul: 'iso_op':\n"
"- urcare -> potrivit pentru frezare de precizie și pt a reduce uzura "
"uneltei\n"
"- conventional -> pentru cazul când nu exista o compensare a 'backlash-ului'"

#: AppDatabase.py:1424 AppGUI/ObjectUI.py:415
#: AppGUI/preferences/geometry/GeometryEditorPrefGroupUI.py:62
#: AppGUI/preferences/gerber/GerberOptPrefGroupUI.py:102
#: AppGUI/preferences/tools/ToolsNCCPrefGroupUI.py:144 AppTools/ToolNCC.py:366
msgid "Climb"
msgstr "Urcare"

#: AppDatabase.py:1425 AppGUI/ObjectUI.py:416
#: AppGUI/preferences/geometry/GeometryEditorPrefGroupUI.py:63
#: AppGUI/preferences/gerber/GerberOptPrefGroupUI.py:103
#: AppGUI/preferences/tools/ToolsNCCPrefGroupUI.py:145 AppTools/ToolNCC.py:367
msgid "Conventional"
msgstr "Convenţional"

#: AppDatabase.py:1437 AppDatabase.py:1546 AppEditors/FlatCAMGeoEditor.py:450
#: AppGUI/preferences/tools/ToolsNCCPrefGroupUI.py:182
#: AppGUI/preferences/tools/ToolsPaintPrefGroupUI.py:163
#: AppTools/ToolNCC.py:382 AppTools/ToolPaint.py:328
msgid "Overlap"
msgstr "Rată suprapunere"

#: AppDatabase.py:1439 AppGUI/preferences/tools/ToolsNCCPrefGroupUI.py:184
#: AppTools/ToolNCC.py:384
msgid ""
"How much (percentage) of the tool width to overlap each tool pass.\n"
"Adjust the value starting with lower values\n"
"and increasing it if areas that should be cleared are still \n"
"not cleared.\n"
"Lower values = faster processing, faster execution on CNC.\n"
"Higher values = slow processing and slow execution on CNC\n"
"due of too many paths."
msgstr ""
"Cât de mult (fracţie) din diametrul uneltei să se suprapună la fiecare "
"trecere a uneltei.\n"
"Ajustează valoarea incepând de la valori mici\n"
"și pe urmă crește dacă ariile care ar trebui >curățate< incă\n"
"nu sunt procesate.\n"
"Valori scăzute = procesare rapidă, execuţie rapidă a PCB-ului.\n"
"Valori mari= procesare lentă cât și o execuţie la fel de lentă a PCB-ului,\n"
"datorită numărului mai mare de treceri-tăiere."

#: AppDatabase.py:1458 AppDatabase.py:1567 AppEditors/FlatCAMGeoEditor.py:470
#: AppGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:72
#: AppGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:229
#: AppGUI/preferences/tools/Tools2FiducialsPrefGroupUI.py:59
#: AppGUI/preferences/tools/Tools2InvertPrefGroupUI.py:45
#: AppGUI/preferences/tools/Tools2InvertPrefGroupUI.py:53
#: AppGUI/preferences/tools/ToolsCornersPrefGroupUI.py:66
#: AppGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:115
#: AppGUI/preferences/tools/ToolsNCCPrefGroupUI.py:202
#: AppGUI/preferences/tools/ToolsPaintPrefGroupUI.py:183
#: AppTools/ToolCopperThieving.py:111 AppTools/ToolCopperThieving.py:362
#: AppTools/ToolCorners.py:140 AppTools/ToolCutOut.py:190
#: AppTools/ToolFiducials.py:172 AppTools/ToolInvertGerber.py:88
#: AppTools/ToolInvertGerber.py:96 AppTools/ToolNCC.py:403
#: AppTools/ToolPaint.py:349
msgid "Margin"
msgstr "Margine"

#: AppDatabase.py:1460
#: AppGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:74
#: AppGUI/preferences/tools/Tools2FiducialsPrefGroupUI.py:61
#: AppGUI/preferences/tools/Tools2FiducialsPrefGroupUI.py:125
#: AppGUI/preferences/tools/ToolsCornersPrefGroupUI.py:68
#: AppGUI/preferences/tools/ToolsNCCPrefGroupUI.py:204
#: AppTools/ToolCopperThieving.py:113 AppTools/ToolCorners.py:142
#: AppTools/ToolFiducials.py:174 AppTools/ToolNCC.py:405
msgid "Bounding box margin."
msgstr "Marginea pentru forma înconjurătoare."

#: AppDatabase.py:1471 AppDatabase.py:1582 AppEditors/FlatCAMGeoEditor.py:484
#: AppGUI/preferences/tools/Tools2EDrillsPrefGroupUI.py:105
#: AppGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:106
#: AppGUI/preferences/tools/ToolsNCCPrefGroupUI.py:215
#: AppGUI/preferences/tools/ToolsPaintPrefGroupUI.py:198
#: AppTools/ToolExtractDrills.py:128 AppTools/ToolNCC.py:416
#: AppTools/ToolPaint.py:364 AppTools/ToolPunchGerber.py:139
msgid "Method"
msgstr "Metodă"

#: AppDatabase.py:1473 AppGUI/preferences/tools/ToolsNCCPrefGroupUI.py:217
#: AppTools/ToolNCC.py:418
msgid ""
"Algorithm for copper clearing:\n"
"- Standard: Fixed step inwards.\n"
"- Seed-based: Outwards from seed.\n"
"- Line-based: Parallel lines."
msgstr ""
"Algoritm pentru curătare cupru:\n"
"- Standard: pas fix spre interior.\n"
"- Punct-origine: înspre exterior porning de la punctul sămanță.\n"
"- Linii: linii paralele."

#: AppDatabase.py:1481 AppDatabase.py:1596 AppEditors/FlatCAMGeoEditor.py:498
#: AppGUI/preferences/tools/ToolsNCCPrefGroupUI.py:230
#: AppGUI/preferences/tools/ToolsPaintPrefGroupUI.py:217
#: AppTools/ToolNCC.py:431 AppTools/ToolNCC.py:2212 AppTools/ToolNCC.py:2739
#: AppTools/ToolNCC.py:2771 AppTools/ToolPaint.py:389
#: AppTools/ToolPaint.py:1839 tclCommands/TclCommandCopperClear.py:126
#: tclCommands/TclCommandCopperClear.py:134 tclCommands/TclCommandPaint.py:125
msgid "Standard"
msgstr "Standard"

#: AppDatabase.py:1481 AppDatabase.py:1596 AppEditors/FlatCAMGeoEditor.py:498
#: AppEditors/FlatCAMGeoEditor.py:568 AppEditors/FlatCAMGeoEditor.py:5144
#: AppGUI/preferences/tools/ToolsNCCPrefGroupUI.py:230
#: AppGUI/preferences/tools/ToolsPaintPrefGroupUI.py:217
#: AppTools/ToolNCC.py:431 AppTools/ToolNCC.py:2223 AppTools/ToolNCC.py:2745
#: AppTools/ToolNCC.py:2777 AppTools/ToolPaint.py:389
#: AppTools/ToolPaint.py:1853 defaults.py:400 defaults.py:432
#: tclCommands/TclCommandCopperClear.py:128
#: tclCommands/TclCommandCopperClear.py:136 tclCommands/TclCommandPaint.py:127
msgid "Seed"
msgstr "Punct_arbitrar"

#: AppDatabase.py:1481 AppDatabase.py:1596 AppEditors/FlatCAMGeoEditor.py:498
#: AppEditors/FlatCAMGeoEditor.py:5148
#: AppGUI/preferences/tools/ToolsNCCPrefGroupUI.py:230
#: AppGUI/preferences/tools/ToolsPaintPrefGroupUI.py:217
#: AppTools/ToolNCC.py:431 AppTools/ToolNCC.py:2234 AppTools/ToolPaint.py:389
#: AppTools/ToolPaint.py:698 AppTools/ToolPaint.py:1867
#: tclCommands/TclCommandCopperClear.py:130 tclCommands/TclCommandPaint.py:129
msgid "Lines"
msgstr "Linii"

#: AppDatabase.py:1481 AppDatabase.py:1596
#: AppGUI/preferences/tools/ToolsNCCPrefGroupUI.py:230
#: AppGUI/preferences/tools/ToolsPaintPrefGroupUI.py:217
#: AppTools/ToolNCC.py:431 AppTools/ToolNCC.py:2245 AppTools/ToolPaint.py:389
#: AppTools/ToolPaint.py:2032 tclCommands/TclCommandPaint.py:133
msgid "Combo"
msgstr "Combinat"

#: AppDatabase.py:1489 AppDatabase.py:1607
#: AppGUI/preferences/tools/ToolsNCCPrefGroupUI.py:237
#: AppGUI/preferences/tools/ToolsPaintPrefGroupUI.py:224
#: AppTools/ToolNCC.py:439 AppTools/ToolPaint.py:400
msgid "Connect"
msgstr "Conectează"

#: AppDatabase.py:1493 AppDatabase.py:1610 AppEditors/FlatCAMGeoEditor.py:507
#: AppGUI/preferences/tools/ToolsNCCPrefGroupUI.py:239
#: AppGUI/preferences/tools/ToolsPaintPrefGroupUI.py:226
#: AppTools/ToolNCC.py:443 AppTools/ToolPaint.py:403
msgid ""
"Draw lines between resulting\n"
"segments to minimize tool lifts."
msgstr ""
"Desenează linii între segmentele\n"
"rezultate pentru a minimiza miscarile\n"
"de ridicare a uneltei."

#: AppDatabase.py:1499 AppDatabase.py:1614
#: AppGUI/preferences/tools/ToolsNCCPrefGroupUI.py:246
#: AppGUI/preferences/tools/ToolsPaintPrefGroupUI.py:232
#: AppTools/ToolNCC.py:449 AppTools/ToolPaint.py:407
msgid "Contour"
msgstr "Contur"

#: AppDatabase.py:1503 AppDatabase.py:1617 AppEditors/FlatCAMGeoEditor.py:517
#: AppGUI/preferences/tools/ToolsNCCPrefGroupUI.py:248
#: AppGUI/preferences/tools/ToolsPaintPrefGroupUI.py:234
#: AppTools/ToolNCC.py:453 AppTools/ToolPaint.py:410
msgid ""
"Cut around the perimeter of the polygon\n"
"to trim rough edges."
msgstr ""
"Taie de-a lungul perimetrului poligonului\n"
"pentru a elimina bavurile."

#: AppDatabase.py:1509 AppEditors/FlatCAMGeoEditor.py:611
#: AppEditors/FlatCAMGrbEditor.py:5289 AppGUI/ObjectUI.py:143
#: AppGUI/ObjectUI.py:1599 AppGUI/ObjectUI.py:2456
#: AppGUI/preferences/tools/ToolsNCCPrefGroupUI.py:255
#: AppGUI/preferences/tools/ToolsTransformPrefGroupUI.py:142
#: AppTools/ToolNCC.py:459 AppTools/ToolTransform.py:28
msgid "Offset"
msgstr "Ofset"

#: AppDatabase.py:1513 AppGUI/preferences/tools/ToolsNCCPrefGroupUI.py:257
#: AppTools/ToolNCC.py:463
msgid ""
"If used, it will add an offset to the copper features.\n"
"The copper clearing will finish to a distance\n"
"from the copper features.\n"
"The value can be between 0 and 10 FlatCAM units."
msgstr ""
"Dacă este folosit, va adăuga un offset la traseele de cupru.\n"
"Curătarea de cupru se va termina la o anume distanță\n"
"de traseele de cupru.\n"
"Valoarea poate fi cuprinsă între 0 și 10 unități FlatCAM."

#: AppDatabase.py:1548 AppEditors/FlatCAMGeoEditor.py:452
#: AppGUI/preferences/tools/ToolsPaintPrefGroupUI.py:165
#: AppTools/ToolPaint.py:330
msgid ""
"How much (percentage) of the tool width to overlap each tool pass.\n"
"Adjust the value starting with lower values\n"
"and increasing it if areas that should be painted are still \n"
"not painted.\n"
"Lower values = faster processing, faster execution on CNC.\n"
"Higher values = slow processing and slow execution on CNC\n"
"due of too many paths."
msgstr ""
"Cat de mult (fracţie) din diametrul uneltei să se suprapună la fiecare "
"trecere a uneltei.\n"
"Ajustează valoarea incepand de la valori mici și pe urma creste dacă ariile "
"care ar trebui\n"
" >pictate< incă nu sunt procesate.\n"
"Valori scăzute = procesare rapidă, execuţie rapidă a PCB-ului.\n"
"Valori mari= procesare lentă cat și o execuţie la fel de lentă a PCB-ului,\n"
"datorită numărului mai mare de treceri-tăiere."

#: AppDatabase.py:1569 AppEditors/FlatCAMGeoEditor.py:472
#: AppGUI/preferences/tools/ToolsPaintPrefGroupUI.py:185
#: AppTools/ToolPaint.py:351
msgid ""
"Distance by which to avoid\n"
"the edges of the polygon to\n"
"be painted."
msgstr ""
"Distanta fata de marginile\n"
"poligonului care trebuie\n"
"să fie >pictat<."

#: AppDatabase.py:1584 AppGUI/preferences/tools/ToolsPaintPrefGroupUI.py:200
#: AppTools/ToolPaint.py:366
msgid ""
"Algorithm for painting:\n"
"- Standard: Fixed step inwards.\n"
"- Seed-based: Outwards from seed.\n"
"- Line-based: Parallel lines.\n"
"- Laser-lines: Active only for Gerber objects.\n"
"Will create lines that follow the traces.\n"
"- Combo: In case of failure a new method will be picked from the above\n"
"in the order specified."
msgstr ""
"Algoritm pentru 'pictare':\n"
"- Standard: pasi fixi spre interior\n"
"- Punct_origine: spre exterior plecand de la punctul samantă\n"
"- Linii: linii paralele\n"
"- Linii-laser: Activ numai pentru fisierele Gerber.\n"
"Va crea treceri-unelte care vor urmari traseele.\n"
"- Combinat: In caz de esec, o noua metodă va fi aleasă dintre cele enumerate "
"mai sus\n"
"intr-o ordine specificată."

#: AppDatabase.py:1596 AppDatabase.py:1598
#: AppGUI/preferences/tools/ToolsPaintPrefGroupUI.py:217
#: AppTools/ToolPaint.py:389 AppTools/ToolPaint.py:391
#: AppTools/ToolPaint.py:692 AppTools/ToolPaint.py:697
#: AppTools/ToolPaint.py:1881 tclCommands/TclCommandPaint.py:131
msgid "Laser_lines"
msgstr "Linii-laser"

#: AppDatabase.py:1641
msgid "Add Tool in DB"
msgstr "Adăugați Unealta în DB"

#: AppDatabase.py:1675
msgid "Save DB"
msgstr "Salvează DB"

#: AppDatabase.py:1677
msgid "Save the Tools Database information's."
msgstr "Salvați informațiile din DB de Unelte."

#: AppEditors/FlatCAMExcEditor.py:50 AppEditors/FlatCAMExcEditor.py:74
#: AppEditors/FlatCAMExcEditor.py:168 AppEditors/FlatCAMExcEditor.py:385
#: AppEditors/FlatCAMExcEditor.py:589 AppEditors/FlatCAMGrbEditor.py:241
#: AppEditors/FlatCAMGrbEditor.py:248
msgid "Click to place ..."
msgstr "Click pt a plasa ..."

#: AppEditors/FlatCAMExcEditor.py:58
msgid "To add a drill first select a tool"
msgstr ""
"Pentru a adăuga o operaţie de găurire mai intai selectează un burghiu "
"(unealtă)"

#: AppEditors/FlatCAMExcEditor.py:122
msgid "Done. Drill added."
msgstr "Executat. Operaţie de găurire adăugată."

#: AppEditors/FlatCAMExcEditor.py:176
msgid "To add an Drill Array first select a tool in Tool Table"
msgstr ""
"Pentru a adăuga o arie de operațiuni de găurire mai intai selectează un "
"burghiu (unealtă)"

#: AppEditors/FlatCAMExcEditor.py:192 AppEditors/FlatCAMExcEditor.py:415
#: AppEditors/FlatCAMExcEditor.py:636 AppEditors/FlatCAMExcEditor.py:1151
#: AppEditors/FlatCAMExcEditor.py:1178 AppEditors/FlatCAMGrbEditor.py:471
#: AppEditors/FlatCAMGrbEditor.py:1935 AppEditors/FlatCAMGrbEditor.py:1965
msgid "Click on target location ..."
msgstr "Click pe locatia tintă ..."

#: AppEditors/FlatCAMExcEditor.py:211
msgid "Click on the Drill Circular Array Start position"
msgstr "Click pe punctul de Start al ariei de operațiuni de găurire"

#: AppEditors/FlatCAMExcEditor.py:233 AppEditors/FlatCAMExcEditor.py:677
#: AppEditors/FlatCAMGrbEditor.py:516
msgid "The value is not Float. Check for comma instead of dot separator."
msgstr ""
"Valoarea nu este număr Real. Verifică să nu fi folosit virgula in loc de "
"punct ca și separator decimal."

#: AppEditors/FlatCAMExcEditor.py:237
msgid "The value is mistyped. Check the value"
msgstr "Valoarea este gresită. Verifică ce ai introdus"

#: AppEditors/FlatCAMExcEditor.py:336
msgid "Too many drills for the selected spacing angle."
msgstr "Prea multe operațiuni de găurire pentru unghiul selectat."

#: AppEditors/FlatCAMExcEditor.py:354
msgid "Done. Drill Array added."
msgstr "Executat. Aria de operațiuni de găurire a fost adăugată."

#: AppEditors/FlatCAMExcEditor.py:394
msgid "To add a slot first select a tool"
msgstr "Pentru a adăuga un slot mai întâi, selectați o unealtă"

#: AppEditors/FlatCAMExcEditor.py:454 AppEditors/FlatCAMExcEditor.py:461
#: AppEditors/FlatCAMExcEditor.py:742 AppEditors/FlatCAMExcEditor.py:749
msgid "Value is missing or wrong format. Add it and retry."
msgstr ""
"Valoarea lipsește sau formatul greșit. Adăugați-l și încercați din nou."

#: AppEditors/FlatCAMExcEditor.py:559
msgid "Done. Adding Slot completed."
msgstr "Terminat. Adăugarea slotului finalizată."

#: AppEditors/FlatCAMExcEditor.py:597
msgid "To add an Slot Array first select a tool in Tool Table"
msgstr ""
"Pentru a adăuga o arie de sloturi, selectați mai întâi o unealtă din tabelul "
"de unelte"

#: AppEditors/FlatCAMExcEditor.py:655
msgid "Click on the Slot Circular Array Start position"
msgstr "Faceți clic pe poziția de pornire a ariei circulare de slotuluri"

#: AppEditors/FlatCAMExcEditor.py:680 AppEditors/FlatCAMGrbEditor.py:519
msgid "The value is mistyped. Check the value."
msgstr "Valoarea este gresită. Verifică ce ai introdus."

#: AppEditors/FlatCAMExcEditor.py:859
msgid "Too many Slots for the selected spacing angle."
msgstr "Prea multe sloturi pentru unghiul de distanțare selectat."

#: AppEditors/FlatCAMExcEditor.py:882
msgid "Done. Slot Array added."
msgstr "Terminat. S-a adăugat aria de sloturi."

#: AppEditors/FlatCAMExcEditor.py:904
msgid "Click on the Drill(s) to resize ..."
msgstr ""
"Click pe operațiunile de găurire care se dorește să fie redimensionate ..."

#: AppEditors/FlatCAMExcEditor.py:934
msgid "Resize drill(s) failed. Please enter a diameter for resize."
msgstr ""
"Redimensionarea operațiunilor de găurire a eșuat. Adaugă o valoare pentru "
"dimetrul la care se face redimensionarea."

#: AppEditors/FlatCAMExcEditor.py:1112
msgid "Done. Drill/Slot Resize completed."
msgstr "Executat. Redimensionarea Perforării / slotului finalizată."

#: AppEditors/FlatCAMExcEditor.py:1115
msgid "Cancelled. No drills/slots selected for resize ..."
msgstr "Anulat. Nu au fost selectate găuri / sloturi pentru redimensionare ..."

#: AppEditors/FlatCAMExcEditor.py:1153 AppEditors/FlatCAMGrbEditor.py:1937
msgid "Click on reference location ..."
msgstr "Click pe locatia de referinţă ..."

#: AppEditors/FlatCAMExcEditor.py:1210
msgid "Done. Drill(s) Move completed."
msgstr "Executat. Operatiile de găurire au fost mutate."

#: AppEditors/FlatCAMExcEditor.py:1318
msgid "Done. Drill(s) copied."
msgstr "Executat. Operatiile de găurire au fost copiate."

#: AppEditors/FlatCAMExcEditor.py:1557
#: AppGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:26
msgid "Excellon Editor"
msgstr "Editor Excellon"

#: AppEditors/FlatCAMExcEditor.py:1564 AppEditors/FlatCAMGrbEditor.py:2460
msgid "Name:"
msgstr "Nume:"

#: AppEditors/FlatCAMExcEditor.py:1570 AppGUI/ObjectUI.py:761
#: AppGUI/ObjectUI.py:1567 AppTools/ToolNCC.py:120 AppTools/ToolPaint.py:114
#: AppTools/ToolSolderPaste.py:74
msgid "Tools Table"
msgstr "Tabela Unelte"

#: AppEditors/FlatCAMExcEditor.py:1572 AppGUI/ObjectUI.py:763
msgid ""
"Tools in this Excellon object\n"
"when are used for drilling."
msgstr ""
"Burghie (unelte) in acest obiect Excellon\n"
"când se face găurire."

#: AppEditors/FlatCAMExcEditor.py:1584 AppEditors/FlatCAMExcEditor.py:3041
#: AppGUI/ObjectUI.py:781 AppObjects/FlatCAMExcellon.py:1177
#: AppObjects/FlatCAMExcellon.py:1268 AppObjects/FlatCAMExcellon.py:1453
#: AppTools/ToolNCC.py:132 AppTools/ToolPaint.py:127
#: AppTools/ToolPcbWizard.py:76 AppTools/ToolProperties.py:416
#: AppTools/ToolProperties.py:476 AppTools/ToolSolderPaste.py:85
#: tclCommands/TclCommandDrillcncjob.py:195
msgid "Diameter"
msgstr "Diametru"

#: AppEditors/FlatCAMExcEditor.py:1592
msgid "Add/Delete Tool"
msgstr "Adaugă/Șterge Unealta"

#: AppEditors/FlatCAMExcEditor.py:1594
msgid ""
"Add/Delete a tool to the tool list\n"
"for this Excellon object."
msgstr ""
"Adaugă/Șterge o unealtă la lista de unelte\n"
"pentru acest obiect Excellon."

#: AppEditors/FlatCAMExcEditor.py:1606 AppGUI/ObjectUI.py:1687
#: AppGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:57
msgid "Diameter for the new tool"
msgstr "Diametru pentru noua unealtă (burghiu, freza)"

#: AppEditors/FlatCAMExcEditor.py:1616
msgid "Add Tool"
msgstr "Adaugă Unealta"

#: AppEditors/FlatCAMExcEditor.py:1618
msgid ""
"Add a new tool to the tool list\n"
"with the diameter specified above."
msgstr ""
"Adaugă o unealtă noua la lista de unelte\n"
"cu diametrul specificat deasupra."

#: AppEditors/FlatCAMExcEditor.py:1630
msgid "Delete Tool"
msgstr "Șterge Unealta"

#: AppEditors/FlatCAMExcEditor.py:1632
msgid ""
"Delete a tool in the tool list\n"
"by selecting a row in the tool table."
msgstr ""
"Șterge o unealtă in lista de unelte\n"
"prin selectarea unei linii in tabela de unelte."

#: AppEditors/FlatCAMExcEditor.py:1650 AppGUI/MainGUI.py:4278
msgid "Resize Drill(s)"
msgstr "Redimensionare operațiuni de găurire"

#: AppEditors/FlatCAMExcEditor.py:1652
msgid "Resize a drill or a selection of drills."
msgstr ""
"Redimensionează o operaţie de găurire sau o selecţie de operațiuni de "
"găurire."

#: AppEditors/FlatCAMExcEditor.py:1659
msgid "Resize Dia"
msgstr "Redimens. Dia"

#: AppEditors/FlatCAMExcEditor.py:1661
msgid "Diameter to resize to."
msgstr "Diametrul la care se face redimensionarea."

#: AppEditors/FlatCAMExcEditor.py:1672
msgid "Resize"
msgstr "Redimensionează"

#: AppEditors/FlatCAMExcEditor.py:1674
msgid "Resize drill(s)"
msgstr "Redimensionează op. de găurire."

#: AppEditors/FlatCAMExcEditor.py:1699 AppGUI/MainGUI.py:1471
#: AppGUI/MainGUI.py:4277
msgid "Add Drill Array"
msgstr "Adaugă o arie de op. găurire"

#: AppEditors/FlatCAMExcEditor.py:1701
msgid "Add an array of drills (linear or circular array)"
msgstr "Adaugă o arie de operațiuni de găurire (arie lineara sau circulara)."

#: AppEditors/FlatCAMExcEditor.py:1707
msgid ""
"Select the type of drills array to create.\n"
"It can be Linear X(Y) or Circular"
msgstr ""
"Selectează tipul de arii de operațiuni de găurire.\n"
"Poate fi Liniar X(Y) sau Circular"

#: AppEditors/FlatCAMExcEditor.py:1710 AppEditors/FlatCAMExcEditor.py:1924
#: AppEditors/FlatCAMGrbEditor.py:2773
msgid "Linear"
msgstr "Liniar"

#: AppEditors/FlatCAMExcEditor.py:1711 AppEditors/FlatCAMExcEditor.py:1925
#: AppEditors/FlatCAMGrbEditor.py:2774 AppGUI/ObjectUI.py:316
#: AppGUI/preferences/tools/Tools2EDrillsPrefGroupUI.py:52
#: AppGUI/preferences/tools/Tools2EDrillsPrefGroupUI.py:149
#: AppGUI/preferences/tools/Tools2FiducialsPrefGroupUI.py:107
#: AppGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:52
#: AppGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:151
#: AppGUI/preferences/tools/ToolsNCCPrefGroupUI.py:61
#: AppGUI/preferences/tools/ToolsPaintPrefGroupUI.py:70
#: AppTools/ToolExtractDrills.py:78 AppTools/ToolExtractDrills.py:201
#: AppTools/ToolFiducials.py:220 AppTools/ToolNCC.py:221
#: AppTools/ToolPaint.py:203 AppTools/ToolPunchGerber.py:89
#: AppTools/ToolPunchGerber.py:229
msgid "Circular"
msgstr "Circular"

#: AppEditors/FlatCAMExcEditor.py:1719
#: AppGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:68
msgid "Nr of drills"
msgstr "Nr. op. găurire"

#: AppEditors/FlatCAMExcEditor.py:1720
#: AppGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:70
msgid "Specify how many drills to be in the array."
msgstr "Specifica cate operațiuni de găurire să fie incluse in arie."

#: AppEditors/FlatCAMExcEditor.py:1738 AppEditors/FlatCAMExcEditor.py:1788
#: AppEditors/FlatCAMExcEditor.py:1860 AppEditors/FlatCAMExcEditor.py:1953
#: AppEditors/FlatCAMExcEditor.py:2004 AppEditors/FlatCAMGrbEditor.py:1571
#: AppEditors/FlatCAMGrbEditor.py:2802 AppEditors/FlatCAMGrbEditor.py:2851
#: AppGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:178
msgid "Direction"
msgstr "Direcţie"

#: AppEditors/FlatCAMExcEditor.py:1740 AppEditors/FlatCAMExcEditor.py:1955
#: AppEditors/FlatCAMGrbEditor.py:2804
#: AppGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:86
#: AppGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:234
#: AppGUI/preferences/gerber/GerberEditorPrefGroupUI.py:122
msgid ""
"Direction on which the linear array is oriented:\n"
"- 'X' - horizontal axis \n"
"- 'Y' - vertical axis or \n"
"- 'Angle' - a custom angle for the array inclination"
msgstr ""
"Directia in care aria lineara este orientata:\n"
"- 'X' - pe axa orizontala \n"
"- 'Y' - pe axa verticala sau \n"
"- 'Unghi' - un unghi particular pentru inclinatia ariei"

#: AppEditors/FlatCAMExcEditor.py:1747 AppEditors/FlatCAMExcEditor.py:1869
#: AppEditors/FlatCAMExcEditor.py:1962 AppEditors/FlatCAMGrbEditor.py:2811
#: AppGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:92
#: AppGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:187
#: AppGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:240
#: AppGUI/preferences/gerber/GerberEditorPrefGroupUI.py:128
#: AppGUI/preferences/tools/ToolsFilmPrefGroupUI.py:208
#: AppTools/ToolFilm.py:239
msgid "X"
msgstr "X"

#: AppEditors/FlatCAMExcEditor.py:1748 AppEditors/FlatCAMExcEditor.py:1870
#: AppEditors/FlatCAMExcEditor.py:1963 AppEditors/FlatCAMGrbEditor.py:2812
#: AppGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:93
#: AppGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:188
#: AppGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:241
#: AppGUI/preferences/gerber/GerberEditorPrefGroupUI.py:129
#: AppGUI/preferences/tools/ToolsFilmPrefGroupUI.py:209
#: AppTools/ToolFilm.py:240
msgid "Y"
msgstr "Y"

#: AppEditors/FlatCAMExcEditor.py:1749 AppEditors/FlatCAMExcEditor.py:1766
#: AppEditors/FlatCAMExcEditor.py:1800 AppEditors/FlatCAMExcEditor.py:1871
#: AppEditors/FlatCAMExcEditor.py:1875 AppEditors/FlatCAMExcEditor.py:1964
#: AppEditors/FlatCAMExcEditor.py:1982 AppEditors/FlatCAMExcEditor.py:2016
#: AppEditors/FlatCAMGrbEditor.py:2813 AppEditors/FlatCAMGrbEditor.py:2830
#: AppEditors/FlatCAMGrbEditor.py:2866
#: AppGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:94
#: AppGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:113
#: AppGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:189
#: AppGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:194
#: AppGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:242
#: AppGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:263
#: AppGUI/preferences/gerber/GerberEditorPrefGroupUI.py:130
#: AppGUI/preferences/gerber/GerberEditorPrefGroupUI.py:148
#: AppGUI/preferences/tools/ToolsTransformPrefGroupUI.py:53
#: AppTools/ToolDistance.py:120 AppTools/ToolDistanceMin.py:68
#: AppTools/ToolTransform.py:60
msgid "Angle"
msgstr "Unghi"

#: AppEditors/FlatCAMExcEditor.py:1753 AppEditors/FlatCAMExcEditor.py:1968
#: AppEditors/FlatCAMGrbEditor.py:2817
#: AppGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:100
#: AppGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:248
#: AppGUI/preferences/gerber/GerberEditorPrefGroupUI.py:136
msgid "Pitch"
msgstr "Pas"

#: AppEditors/FlatCAMExcEditor.py:1755 AppEditors/FlatCAMExcEditor.py:1970
#: AppEditors/FlatCAMGrbEditor.py:2819
#: AppGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:102
#: AppGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:250
#: AppGUI/preferences/gerber/GerberEditorPrefGroupUI.py:138
msgid "Pitch = Distance between elements of the array."
msgstr "Pas = Distanta între elementele ariei."

#: AppEditors/FlatCAMExcEditor.py:1768 AppEditors/FlatCAMExcEditor.py:1984
msgid ""
"Angle at which the linear array is placed.\n"
"The precision is of max 2 decimals.\n"
"Min value is: -360 degrees.\n"
"Max value is:  360.00 degrees."
msgstr ""
"Unghiul global la care aria lineara este plasata.\n"
"Precizia este de max 2 zecimale.\n"
"Val minima este: -360grade.\n"
"Val maxima este:  360.00 grade."

#: AppEditors/FlatCAMExcEditor.py:1789 AppEditors/FlatCAMExcEditor.py:2005
#: AppEditors/FlatCAMGrbEditor.py:2853
msgid ""
"Direction for circular array.Can be CW = clockwise or CCW = counter "
"clockwise."
msgstr ""
"Directia pentru aria circulară. Poate fi CW = in sensul acelor de ceasornic "
"sau CCW = invers acelor de ceasornic."

#: AppEditors/FlatCAMExcEditor.py:1796 AppEditors/FlatCAMExcEditor.py:2012
#: AppEditors/FlatCAMGrbEditor.py:2861
#: AppGUI/preferences/excellon/ExcellonAdvOptPrefGroupUI.py:129
#: AppGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:136
#: AppGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:286
#: AppGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:142
#: AppGUI/preferences/gerber/GerberEditorPrefGroupUI.py:170
msgid "CW"
msgstr "Orar"

#: AppEditors/FlatCAMExcEditor.py:1797 AppEditors/FlatCAMExcEditor.py:2013
#: AppEditors/FlatCAMGrbEditor.py:2862
#: AppGUI/preferences/excellon/ExcellonAdvOptPrefGroupUI.py:130
#: AppGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:137
#: AppGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:287
#: AppGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:143
#: AppGUI/preferences/gerber/GerberEditorPrefGroupUI.py:171
msgid "CCW"
msgstr "Antiorar"

#: AppEditors/FlatCAMExcEditor.py:1801 AppEditors/FlatCAMExcEditor.py:2017
#: AppEditors/FlatCAMGrbEditor.py:2868
#: AppGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:115
#: AppGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:145
#: AppGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:265
#: AppGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:295
#: AppGUI/preferences/gerber/GerberEditorPrefGroupUI.py:150
#: AppGUI/preferences/gerber/GerberEditorPrefGroupUI.py:179
msgid "Angle at which each element in circular array is placed."
msgstr ""
"Unghiul la care fiecare element al ariei circulare este plasat fata de "
"originea ariei."

#: AppEditors/FlatCAMExcEditor.py:1835
msgid "Slot Parameters"
msgstr "Parametrii pt slot"

#: AppEditors/FlatCAMExcEditor.py:1837
msgid ""
"Parameters for adding a slot (hole with oval shape)\n"
"either single or as an part of an array."
msgstr ""
"Parametri pentru adăugarea unui slot (gaură cu formă ovală)\n"
"fie single sau ca parte a unei arii."

#: AppEditors/FlatCAMExcEditor.py:1846
#: AppGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:162
#: AppGUI/preferences/tools/ToolsCornersPrefGroupUI.py:56
#: AppTools/ToolCorners.py:127 AppTools/ToolProperties.py:559
msgid "Length"
msgstr "Lungime"

#: AppEditors/FlatCAMExcEditor.py:1848
#: AppGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:164
msgid "Length = The length of the slot."
msgstr "Lungime = Lungimea slotului."

#: AppEditors/FlatCAMExcEditor.py:1862
#: AppGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:180
msgid ""
"Direction on which the slot is oriented:\n"
"- 'X' - horizontal axis \n"
"- 'Y' - vertical axis or \n"
"- 'Angle' - a custom angle for the slot inclination"
msgstr ""
"Direcția spre care este orientat slotul:\n"
"- „X” - axa orizontală\n"
"- „Y” - axa verticală sau\n"
"- „Unghi” - un unghi personalizat pentru înclinarea slotului"

#: AppEditors/FlatCAMExcEditor.py:1877
msgid ""
"Angle at which the slot is placed.\n"
"The precision is of max 2 decimals.\n"
"Min value is: -360 degrees.\n"
"Max value is:  360.00 degrees."
msgstr ""
"Unghiul la care este plasat slotul.\n"
"Precizia este de maxim 2 zecimale.\n"
"Valoarea minimă este: -360 grade.\n"
"Valoarea maximă este: 360.00 grade."

#: AppEditors/FlatCAMExcEditor.py:1910
msgid "Slot Array Parameters"
msgstr "Parametri Arie sloturi"

#: AppEditors/FlatCAMExcEditor.py:1912
msgid "Parameters for the array of slots (linear or circular array)"
msgstr "Parametri pentru Aria de sloturi (arie circulară sau liniară)"

#: AppEditors/FlatCAMExcEditor.py:1921
msgid ""
"Select the type of slot array to create.\n"
"It can be Linear X(Y) or Circular"
msgstr ""
"Selectați tipul de slot pentru creare.\n"
"Poate fi liniar X (Y) sau circular"

#: AppEditors/FlatCAMExcEditor.py:1933
#: AppGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:219
msgid "Nr of slots"
msgstr "Nr de sloturi"

#: AppEditors/FlatCAMExcEditor.py:1934
#: AppGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:221
msgid "Specify how many slots to be in the array."
msgstr "Specificați câte sloturi trebuie să fie în arie."

#: AppEditors/FlatCAMExcEditor.py:2452 AppObjects/FlatCAMExcellon.py:423
msgid "Total Drills"
msgstr "Nr. Tot. Op. Găurire"

#: AppEditors/FlatCAMExcEditor.py:2484 AppObjects/FlatCAMExcellon.py:454
msgid "Total Slots"
msgstr "Nr. Tot. Sloturi"

#: AppEditors/FlatCAMExcEditor.py:2559 AppEditors/FlatCAMGeoEditor.py:1075
#: AppEditors/FlatCAMGeoEditor.py:1116 AppEditors/FlatCAMGeoEditor.py:1144
#: AppEditors/FlatCAMGeoEditor.py:1172 AppEditors/FlatCAMGeoEditor.py:1216
#: AppEditors/FlatCAMGeoEditor.py:1251 AppEditors/FlatCAMGeoEditor.py:1279
#: AppObjects/FlatCAMGeometry.py:656 AppObjects/FlatCAMGeometry.py:1090
#: AppObjects/FlatCAMGeometry.py:1830 AppObjects/FlatCAMGeometry.py:2480
#: AppTools/ToolNCC.py:1498 AppTools/ToolPaint.py:1248
#: AppTools/ToolPaint.py:1419 AppTools/ToolSolderPaste.py:883
#: AppTools/ToolSolderPaste.py:956
msgid "Wrong value format entered, use a number."
msgstr "Valoare in format incorect, foloseşte un număr."

#: AppEditors/FlatCAMExcEditor.py:2570
msgid ""
"Tool already in the original or actual tool list.\n"
"Save and reedit Excellon if you need to add this tool. "
msgstr ""
"Unealta este deja in lista originală sau actuală de unelte.\n"
"Salvează și reeditează obiectul Excellon dacă ai nevoie să adaugi această "
"unealtă. "

#: AppEditors/FlatCAMExcEditor.py:2579 AppGUI/MainGUI.py:3285
msgid "Added new tool with dia"
msgstr "O nouă unealtă este adăugată cu diametrul"

#: AppEditors/FlatCAMExcEditor.py:2612
msgid "Select a tool in Tool Table"
msgstr "Selectează o unealtă in Tabela de Unelte"

#: AppEditors/FlatCAMExcEditor.py:2642
msgid "Deleted tool with diameter"
msgstr "Unealtă ștearsă cu diametrul"

#: AppEditors/FlatCAMExcEditor.py:2790
msgid "Done. Tool edit completed."
msgstr "Terminat. Editarea uneltei a fost finalizată."

#: AppEditors/FlatCAMExcEditor.py:3327
msgid "There are no Tools definitions in the file. Aborting Excellon creation."
msgstr ""
"Nu exista definitii de unelte in fişier. Se anulează crearea de obiect "
"Excellon."

#: AppEditors/FlatCAMExcEditor.py:3331
msgid "An internal error has ocurred. See Shell.\n"
msgstr ""
"A apărut o eroare internă. Verifică in TCL Shell pt mai multe detalii.\n"

#: AppEditors/FlatCAMExcEditor.py:3336
msgid "Creating Excellon."
msgstr "In curs de creere Excellon."

#: AppEditors/FlatCAMExcEditor.py:3348
msgid "Excellon editing finished."
msgstr "Editarea Excellon a fost terminată."

#: AppEditors/FlatCAMExcEditor.py:3365
msgid "Cancelled. There is no Tool/Drill selected"
msgstr "Anulat. Nu este selectată nici-o unealtă sau op. de găurire"

#: AppEditors/FlatCAMExcEditor.py:3599 AppEditors/FlatCAMExcEditor.py:3607
#: AppEditors/FlatCAMGeoEditor.py:4341 AppEditors/FlatCAMGeoEditor.py:4355
#: AppEditors/FlatCAMGrbEditor.py:1085 AppEditors/FlatCAMGrbEditor.py:1202
#: AppEditors/FlatCAMGrbEditor.py:1488 AppEditors/FlatCAMGrbEditor.py:1757
#: AppEditors/FlatCAMGrbEditor.py:4595 AppEditors/FlatCAMGrbEditor.py:4610
#: AppGUI/MainGUI.py:2638 AppGUI/MainGUI.py:2650
#: AppTools/ToolAlignObjects.py:393 AppTools/ToolAlignObjects.py:415
#: App_Main.py:4899 App_Main.py:5053
msgid "Done."
msgstr "Executat."

#: AppEditors/FlatCAMExcEditor.py:3982
msgid "Done. Drill(s) deleted."
msgstr "Executat. Operatiile de găurire șterse."

#: AppEditors/FlatCAMExcEditor.py:4055 AppEditors/FlatCAMExcEditor.py:4065
#: AppEditors/FlatCAMGrbEditor.py:5041
msgid "Click on the circular array Center position"
msgstr "Click pe punctul de Centru al ariei circulare"

#: AppEditors/FlatCAMGeoEditor.py:84
msgid "Buffer distance:"
msgstr "Distanta pt bufer:"

#: AppEditors/FlatCAMGeoEditor.py:85
msgid "Buffer corner:"
msgstr "Coltul pt bufer:"

#: AppEditors/FlatCAMGeoEditor.py:87
msgid ""
"There are 3 types of corners:\n"
" - 'Round': the corner is rounded for exterior buffer.\n"
" - 'Square': the corner is met in a sharp angle for exterior buffer.\n"
" - 'Beveled': the corner is a line that directly connects the features "
"meeting in the corner"
msgstr ""
"Sunt disponibile 3 tipuri de colțuri:\n"
"- 'Rotund': coltul este rotunjit in cazul buferului exterior.\n"
"- 'Patrat:' colțurile formează unghi de 90 grade pt buferul exterior\n"
"- 'Beveled:' coltul este inlocuit cu o linie care uneste capetele liniilor "
"care formează coltul"

#: AppEditors/FlatCAMGeoEditor.py:93 AppEditors/FlatCAMGrbEditor.py:2629
msgid "Round"
msgstr "Rotund"

#: AppEditors/FlatCAMGeoEditor.py:94 AppEditors/FlatCAMGrbEditor.py:2630
#: AppGUI/ObjectUI.py:1370 AppGUI/ObjectUI.py:2204
#: AppGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:217
#: AppGUI/preferences/tools/Tools2EDrillsPrefGroupUI.py:68
#: AppGUI/preferences/tools/Tools2EDrillsPrefGroupUI.py:175
#: AppGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:68
#: AppGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:177
#: AppGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:143
#: AppGUI/preferences/tools/ToolsNCCPrefGroupUI.py:327
#: AppGUI/preferences/tools/ToolsPaintPrefGroupUI.py:291
#: AppTools/ToolExtractDrills.py:94 AppTools/ToolExtractDrills.py:227
#: AppTools/ToolNCC.py:583 AppTools/ToolPaint.py:526
#: AppTools/ToolPunchGerber.py:105 AppTools/ToolPunchGerber.py:255
#: AppTools/ToolQRCode.py:198
msgid "Square"
msgstr "Patrat"

#: AppEditors/FlatCAMGeoEditor.py:95 AppEditors/FlatCAMGrbEditor.py:2631
msgid "Beveled"
msgstr "Beveled"

#: AppEditors/FlatCAMGeoEditor.py:102
msgid "Buffer Interior"
msgstr "Bufer interior"

#: AppEditors/FlatCAMGeoEditor.py:104
msgid "Buffer Exterior"
msgstr "Bufer Exterior"

#: AppEditors/FlatCAMGeoEditor.py:110
msgid "Full Buffer"
msgstr "Bufer complet"

#: AppEditors/FlatCAMGeoEditor.py:131 AppEditors/FlatCAMGeoEditor.py:3016
#: AppGUI/MainGUI.py:4187
#: AppGUI/preferences/gerber/GerberEditorPrefGroupUI.py:190
msgid "Buffer Tool"
msgstr "Unealta Bufer"

#: AppEditors/FlatCAMGeoEditor.py:143 AppEditors/FlatCAMGeoEditor.py:160
#: AppEditors/FlatCAMGeoEditor.py:177 AppEditors/FlatCAMGeoEditor.py:3035
#: AppEditors/FlatCAMGeoEditor.py:3063 AppEditors/FlatCAMGeoEditor.py:3091
#: AppEditors/FlatCAMGrbEditor.py:5094
msgid "Buffer distance value is missing or wrong format. Add it and retry."
msgstr ""
"Valoarea distantei bufer lipseste sau este intr-un format gresit. Adaugă din "
"nou și reîncearcă."

#: AppEditors/FlatCAMGeoEditor.py:241
msgid "Font"
msgstr "Font"

#: AppEditors/FlatCAMGeoEditor.py:322 AppGUI/MainGUI.py:1409
msgid "Text"
msgstr "Text"

#: AppEditors/FlatCAMGeoEditor.py:348
msgid "Text Tool"
msgstr "Unealta Text"

#: AppEditors/FlatCAMGeoEditor.py:404 AppGUI/MainGUI.py:513
#: AppGUI/MainGUI.py:1156 AppGUI/ObjectUI.py:818 AppGUI/ObjectUI.py:1764
#: AppObjects/FlatCAMExcellon.py:821 AppObjects/FlatCAMExcellon.py:1163
#: AppObjects/FlatCAMGeometry.py:816 AppTools/ToolNCC.py:331
#: AppTools/ToolNCC.py:797 AppTools/ToolPaint.py:313 AppTools/ToolPaint.py:766
msgid "Tool"
msgstr "Unealta"

#: AppEditors/FlatCAMGeoEditor.py:438 AppGUI/ObjectUI.py:364
#: AppGUI/preferences/gerber/GerberOptPrefGroupUI.py:43
msgid "Tool dia"
msgstr "Dia unealtă"

#: AppEditors/FlatCAMGeoEditor.py:440
msgid "Diameter of the tool to be used in the operation."
msgstr "Diametrul uneltei care este utilizata in operaţie."

#: AppEditors/FlatCAMGeoEditor.py:486
msgid ""
"Algorithm to paint the polygons:\n"
"- Standard: Fixed step inwards.\n"
"- Seed-based: Outwards from seed.\n"
"- Line-based: Parallel lines."
msgstr ""
"Algoritm pentru picture poligoane:\n"
"- Standard: pas fix spre interior.\n"
"- Semințe: înspre exterior porning de la punctul sămanță.\n"
"- Linii: linii paralele."

#: AppEditors/FlatCAMGeoEditor.py:505
msgid "Connect:"
msgstr "Conectează:"

#: AppEditors/FlatCAMGeoEditor.py:515
msgid "Contour:"
msgstr "Contur:"

#: AppEditors/FlatCAMGeoEditor.py:528 AppGUI/MainGUI.py:1413
msgid "Paint"
msgstr "Pictează"

#: AppEditors/FlatCAMGeoEditor.py:546 AppGUI/MainGUI.py:917
#: AppGUI/MainGUI.py:1879 AppGUI/ObjectUI.py:2269 AppTools/ToolPaint.py:42
#: AppTools/ToolPaint.py:737
msgid "Paint Tool"
msgstr "Unealta Paint"

#: AppEditors/FlatCAMGeoEditor.py:582 AppEditors/FlatCAMGeoEditor.py:1054
#: AppEditors/FlatCAMGeoEditor.py:3023 AppEditors/FlatCAMGeoEditor.py:3051
#: AppEditors/FlatCAMGeoEditor.py:3079 AppEditors/FlatCAMGeoEditor.py:4494
#: AppEditors/FlatCAMGrbEditor.py:5745
msgid "Cancelled. No shape selected."
msgstr "Anulat. Nici-o forma geometrică nu este selectată."

#: AppEditors/FlatCAMGeoEditor.py:595 AppEditors/FlatCAMGeoEditor.py:3041
#: AppEditors/FlatCAMGeoEditor.py:3069 AppEditors/FlatCAMGeoEditor.py:3097
#: AppGUI/preferences/geometry/GeometryGenPrefGroupUI.py:59
#: AppTools/ToolProperties.py:117 AppTools/ToolProperties.py:162
msgid "Tools"
msgstr "Unelte"

#: AppEditors/FlatCAMGeoEditor.py:606 AppEditors/FlatCAMGeoEditor.py:990
#: AppEditors/FlatCAMGrbEditor.py:5284 AppEditors/FlatCAMGrbEditor.py:5681
#: AppGUI/MainGUI.py:938 AppGUI/MainGUI.py:1900 AppTools/ToolTransform.py:460
msgid "Transform Tool"
msgstr "Unealta Transformare"

#: AppEditors/FlatCAMGeoEditor.py:607 AppEditors/FlatCAMGeoEditor.py:672
#: AppEditors/FlatCAMGrbEditor.py:5285 AppEditors/FlatCAMGrbEditor.py:5350
#: AppGUI/preferences/tools/ToolsTransformPrefGroupUI.py:45
#: AppTools/ToolTransform.py:24 AppTools/ToolTransform.py:466
msgid "Rotate"
msgstr "Rotaţie"

#: AppEditors/FlatCAMGeoEditor.py:608 AppEditors/FlatCAMGrbEditor.py:5286
#: AppTools/ToolTransform.py:25
msgid "Skew/Shear"
msgstr "Deformare"

#: AppEditors/FlatCAMGeoEditor.py:609 AppEditors/FlatCAMGrbEditor.py:2678
#: AppEditors/FlatCAMGrbEditor.py:5287 AppGUI/MainGUI.py:1058
#: AppGUI/MainGUI.py:1456 AppGUI/MainGUI.py:2020 AppGUI/MainGUI.py:4399
#: AppGUI/ObjectUI.py:125
#: AppGUI/preferences/tools/ToolsTransformPrefGroupUI.py:95
#: AppTools/ToolTransform.py:26
msgid "Scale"
msgstr "Scalare"

#: AppEditors/FlatCAMGeoEditor.py:610 AppEditors/FlatCAMGrbEditor.py:5288
#: AppTools/ToolTransform.py:27
msgid "Mirror (Flip)"
msgstr "Oglindire"

#: AppEditors/FlatCAMGeoEditor.py:624 AppEditors/FlatCAMGrbEditor.py:5302
#: AppGUI/MainGUI.py:849 AppGUI/MainGUI.py:1813
msgid "Editor"
msgstr "Editor"

#: AppEditors/FlatCAMGeoEditor.py:656 AppEditors/FlatCAMGrbEditor.py:5334
msgid "Angle:"
msgstr "Unghi:"

#: AppEditors/FlatCAMGeoEditor.py:658 AppEditors/FlatCAMGrbEditor.py:5336
#: AppGUI/preferences/tools/ToolsTransformPrefGroupUI.py:55
#: AppTools/ToolTransform.py:62
msgid ""
"Angle for Rotation action, in degrees.\n"
"Float number between -360 and 359.\n"
"Positive numbers for CW motion.\n"
"Negative numbers for CCW motion."
msgstr ""
"Unghiul pentru Rotaţie, in grade. Număr Real cu valori între -360 și  359.\n"
"Numerele pozitive inseamna o mișcare in sens ace ceasornic.\n"
"Numerele negative inseamna o mișcare in sens invers ace ceasornic."

#: AppEditors/FlatCAMGeoEditor.py:674 AppEditors/FlatCAMGrbEditor.py:5352
msgid ""
"Rotate the selected shape(s).\n"
"The point of reference is the middle of\n"
"the bounding box for all selected shapes."
msgstr ""
"Roteste formele selectate.\n"
"Punctul de referinţă este mijlocul\n"
"formei înconjurătoare care cuprinde\n"
"toate formele selectate."

#: AppEditors/FlatCAMGeoEditor.py:697 AppEditors/FlatCAMGrbEditor.py:5375
msgid "Angle X:"
msgstr "Unghi X:"

#: AppEditors/FlatCAMGeoEditor.py:699 AppEditors/FlatCAMGeoEditor.py:719
#: AppEditors/FlatCAMGrbEditor.py:5377 AppEditors/FlatCAMGrbEditor.py:5397
#: AppGUI/preferences/tools/ToolsTransformPrefGroupUI.py:74
#: AppGUI/preferences/tools/ToolsTransformPrefGroupUI.py:88
#: AppTools/ToolCalibration.py:505 AppTools/ToolCalibration.py:518
msgid ""
"Angle for Skew action, in degrees.\n"
"Float number between -360 and 359."
msgstr ""
"Valoarea unghiului de Deformare, in grade.\n"
"Ia valori Reale între -360 and 359 grade."

#: AppEditors/FlatCAMGeoEditor.py:710 AppEditors/FlatCAMGrbEditor.py:5388
#: AppTools/ToolTransform.py:467
msgid "Skew X"
msgstr "Deformare X"

#: AppEditors/FlatCAMGeoEditor.py:712 AppEditors/FlatCAMGeoEditor.py:732
#: AppEditors/FlatCAMGrbEditor.py:5390 AppEditors/FlatCAMGrbEditor.py:5410
msgid ""
"Skew/shear the selected shape(s).\n"
"The point of reference is the middle of\n"
"the bounding box for all selected shapes."
msgstr ""
"Deformează formele selectate.\n"
"Punctul de referinţă este mijlocul\n"
"formei înconjurătoare care cuprinde\n"
"toate formele selectate."

#: AppEditors/FlatCAMGeoEditor.py:717 AppEditors/FlatCAMGrbEditor.py:5395
msgid "Angle Y:"
msgstr "Unghi Y:"

#: AppEditors/FlatCAMGeoEditor.py:730 AppEditors/FlatCAMGrbEditor.py:5408
#: AppTools/ToolTransform.py:468
msgid "Skew Y"
msgstr "Deformare Y"

#: AppEditors/FlatCAMGeoEditor.py:758 AppEditors/FlatCAMGrbEditor.py:5436
msgid "Factor X:"
msgstr "Factor X:"

#: AppEditors/FlatCAMGeoEditor.py:760 AppEditors/FlatCAMGrbEditor.py:5438
#: AppTools/ToolCalibration.py:469
msgid "Factor for Scale action over X axis."
msgstr "Factor pentru scalarea pe axa X."

#: AppEditors/FlatCAMGeoEditor.py:770 AppEditors/FlatCAMGrbEditor.py:5448
#: AppTools/ToolTransform.py:469
msgid "Scale X"
msgstr "Scalează X"

#: AppEditors/FlatCAMGeoEditor.py:772 AppEditors/FlatCAMGeoEditor.py:791
#: AppEditors/FlatCAMGrbEditor.py:5450 AppEditors/FlatCAMGrbEditor.py:5469
msgid ""
"Scale the selected shape(s).\n"
"The point of reference depends on \n"
"the Scale reference checkbox state."
msgstr ""
"Scalează formele selectate.\n"
"Punctul de referinţă depinde de  \n"
"starea checkbox-ului >Referința scalare<."

#: AppEditors/FlatCAMGeoEditor.py:777 AppEditors/FlatCAMGrbEditor.py:5455
msgid "Factor Y:"
msgstr "Factor Y:"

#: AppEditors/FlatCAMGeoEditor.py:779 AppEditors/FlatCAMGrbEditor.py:5457
#: AppTools/ToolCalibration.py:481
msgid "Factor for Scale action over Y axis."
msgstr "Factor pentru scalarea pe axa Y."

#: AppEditors/FlatCAMGeoEditor.py:789 AppEditors/FlatCAMGrbEditor.py:5467
#: AppTools/ToolTransform.py:470
msgid "Scale Y"
msgstr "Scalează Y"

#: AppEditors/FlatCAMGeoEditor.py:798 AppEditors/FlatCAMGrbEditor.py:5476
#: AppGUI/preferences/tools/ToolsTransformPrefGroupUI.py:124
#: AppTools/ToolTransform.py:189
msgid "Link"
msgstr "Legatura"

#: AppEditors/FlatCAMGeoEditor.py:800 AppEditors/FlatCAMGrbEditor.py:5478
msgid ""
"Scale the selected shape(s)\n"
"using the Scale Factor X for both axis."
msgstr ""
"Scalează formele selectate\n"
"folsoind factorul: Factor X pentru ambele axe."

#: AppEditors/FlatCAMGeoEditor.py:806 AppEditors/FlatCAMGrbEditor.py:5484
#: AppGUI/preferences/tools/ToolsTransformPrefGroupUI.py:132
#: AppTools/ToolTransform.py:196
msgid "Scale Reference"
msgstr "Referința scalare"

#: AppEditors/FlatCAMGeoEditor.py:808 AppEditors/FlatCAMGrbEditor.py:5486
msgid ""
"Scale the selected shape(s)\n"
"using the origin reference when checked,\n"
"and the center of the biggest bounding box\n"
"of the selected shapes when unchecked."
msgstr ""
"Scalează formele selectate.\n"
"Punctul de referinţă este mijlocul\n"
"formei înconjurătoare care cuprinde\n"
"toate formele selectate când nu este\n"
"bifat și este originea când este bifat."

#: AppEditors/FlatCAMGeoEditor.py:836 AppEditors/FlatCAMGrbEditor.py:5515
msgid "Value X:"
msgstr "Valoare X:"

#: AppEditors/FlatCAMGeoEditor.py:838 AppEditors/FlatCAMGrbEditor.py:5517
msgid "Value for Offset action on X axis."
msgstr "Valoare pentru deplasarea pe axa X."

#: AppEditors/FlatCAMGeoEditor.py:848 AppEditors/FlatCAMGrbEditor.py:5527
#: AppTools/ToolTransform.py:473
msgid "Offset X"
msgstr "Ofset pe X"

#: AppEditors/FlatCAMGeoEditor.py:850 AppEditors/FlatCAMGeoEditor.py:870
#: AppEditors/FlatCAMGrbEditor.py:5529 AppEditors/FlatCAMGrbEditor.py:5549
msgid ""
"Offset the selected shape(s).\n"
"The point of reference is the middle of\n"
"the bounding box for all selected shapes.\n"
msgstr ""
"Deplasează formele selectate\n"
"Punctul de referinţă este mijlocul\n"
"formei înconjurătoare care cuprinde\n"
"toate formele selectate.\n"

#: AppEditors/FlatCAMGeoEditor.py:856 AppEditors/FlatCAMGrbEditor.py:5535
msgid "Value Y:"
msgstr "Valoare Y:"

#: AppEditors/FlatCAMGeoEditor.py:858 AppEditors/FlatCAMGrbEditor.py:5537
msgid "Value for Offset action on Y axis."
msgstr "Valoare pentru deplasarea pe axa Y."

#: AppEditors/FlatCAMGeoEditor.py:868 AppEditors/FlatCAMGrbEditor.py:5547
#: AppTools/ToolTransform.py:474
msgid "Offset Y"
msgstr "Ofset pe Y"

#: AppEditors/FlatCAMGeoEditor.py:899 AppEditors/FlatCAMGrbEditor.py:5578
#: AppTools/ToolTransform.py:475
msgid "Flip on X"
msgstr "Oglindește pe X"

#: AppEditors/FlatCAMGeoEditor.py:901 AppEditors/FlatCAMGeoEditor.py:908
#: AppEditors/FlatCAMGrbEditor.py:5580 AppEditors/FlatCAMGrbEditor.py:5587
msgid ""
"Flip the selected shape(s) over the X axis.\n"
"Does not create a new shape."
msgstr ""
"Oglindește formele selectate peste axa X\n"
"Nu crează noi forme."

#: AppEditors/FlatCAMGeoEditor.py:906 AppEditors/FlatCAMGrbEditor.py:5585
#: AppTools/ToolTransform.py:476
msgid "Flip on Y"
msgstr "Oglindește pe Y"

#: AppEditors/FlatCAMGeoEditor.py:914 AppEditors/FlatCAMGrbEditor.py:5593
msgid "Ref Pt"
msgstr "Pt ref"

#: AppEditors/FlatCAMGeoEditor.py:916 AppEditors/FlatCAMGrbEditor.py:5595
msgid ""
"Flip the selected shape(s)\n"
"around the point in Point Entry Field.\n"
"\n"
"The point coordinates can be captured by\n"
"left click on canvas together with pressing\n"
"SHIFT key. \n"
"Then click Add button to insert coordinates.\n"
"Or enter the coords in format (x, y) in the\n"
"Point Entry field and click Flip on X(Y)"
msgstr ""
"Oglindește formele selectate\n"
"in jurul punctului din câmpul >Punct<\n"
"\n"
"Coordonatele punctului pot fi obtinute\n"
"prin click pe canvas in timp ce se tine apasata\n"
"tasta SHIFT.\n"
"Apoi click pe butonul >Adaugă< pentru a insera\n"
"coordonatele.\n"
"Alternativ se pot introduce manual in formatul (x, y). \n"
"La final click pe >Oglindește pe X(Y)<."

#: AppEditors/FlatCAMGeoEditor.py:928 AppEditors/FlatCAMGrbEditor.py:5607
msgid "Point:"
msgstr "Punct:"

#: AppEditors/FlatCAMGeoEditor.py:930 AppEditors/FlatCAMGrbEditor.py:5609
#: AppTools/ToolTransform.py:299
msgid ""
"Coordinates in format (x, y) used as reference for mirroring.\n"
"The 'x' in (x, y) will be used when using Flip on X and\n"
"the 'y' in (x, y) will be used when using Flip on Y."
msgstr ""
"Coordonatele in format (x, y) folosite pentru oglindire.\n"
"Valoarea 'x' in (x, y) va fi folosita când se face oglindire pe X\n"
"și valoarea 'y' in (x, y) va fi folosita când se face oglindire pe Y."

#: AppEditors/FlatCAMGeoEditor.py:938 AppEditors/FlatCAMGrbEditor.py:2581
#: AppEditors/FlatCAMGrbEditor.py:5619 AppGUI/ObjectUI.py:1697
#: AppTools/ToolDblSided.py:192 AppTools/ToolDblSided.py:425
#: AppTools/ToolNCC.py:294 AppTools/ToolNCC.py:631 AppTools/ToolPaint.py:276
#: AppTools/ToolPaint.py:675 AppTools/ToolSolderPaste.py:122
#: AppTools/ToolSolderPaste.py:597 AppTools/ToolTransform.py:478
#: App_Main.py:5843
msgid "Add"
msgstr "Adaugă"

#: AppEditors/FlatCAMGeoEditor.py:940 AppEditors/FlatCAMGrbEditor.py:5621
#: AppTools/ToolTransform.py:309
msgid ""
"The point coordinates can be captured by\n"
"left click on canvas together with pressing\n"
"SHIFT key. Then click Add button to insert."
msgstr ""
"Coordonatele punctului se pot obtine\n"
"prin click pe canvas in timp ce se tine apasata\n"
"tasta SHIFT.\n"
"La final, apasa butonul >Adaugă< pt a le insera."

#: AppEditors/FlatCAMGeoEditor.py:1303 AppEditors/FlatCAMGrbEditor.py:5929
msgid "No shape selected. Please Select a shape to rotate!"
msgstr ""
"Nici-o forma nu este selectată. Selectează o forma pentru a putea face "
"Rotaţie!"

#: AppEditors/FlatCAMGeoEditor.py:1306 AppEditors/FlatCAMGrbEditor.py:5932
#: AppTools/ToolTransform.py:679
msgid "Appying Rotate"
msgstr "Execuţie Rotaţie"

#: AppEditors/FlatCAMGeoEditor.py:1332 AppEditors/FlatCAMGrbEditor.py:5964
msgid "Done. Rotate completed."
msgstr "Executat. Rotaţie finalizată."

#: AppEditors/FlatCAMGeoEditor.py:1334
msgid "Rotation action was not executed"
msgstr "Actiunea de rotatie nu a fost efectuată"

#: AppEditors/FlatCAMGeoEditor.py:1353 AppEditors/FlatCAMGrbEditor.py:5983
msgid "No shape selected. Please Select a shape to flip!"
msgstr ""
"Nici-o formă nu este selectată. Selectează o formă pentru a putea face "
"Oglindire!"

#: AppEditors/FlatCAMGeoEditor.py:1356 AppEditors/FlatCAMGrbEditor.py:5986
#: AppTools/ToolTransform.py:728
msgid "Applying Flip"
msgstr "Execuţie Oglindire"

#: AppEditors/FlatCAMGeoEditor.py:1385 AppEditors/FlatCAMGrbEditor.py:6024
#: AppTools/ToolTransform.py:769
msgid "Flip on the Y axis done"
msgstr "Oglindire pe axa Y executată"

#: AppEditors/FlatCAMGeoEditor.py:1389 AppEditors/FlatCAMGrbEditor.py:6033
#: AppTools/ToolTransform.py:778
msgid "Flip on the X axis done"
msgstr "Oglindire pe axa X executată"

#: AppEditors/FlatCAMGeoEditor.py:1397
msgid "Flip action was not executed"
msgstr "Actiunea de oglindire nu a fost efectuată"

#: AppEditors/FlatCAMGeoEditor.py:1415 AppEditors/FlatCAMGrbEditor.py:6053
msgid "No shape selected. Please Select a shape to shear/skew!"
msgstr ""
"Nici-o formă nu este selectată. Selectează o formă pentru a putea face "
"Deformare!"

#: AppEditors/FlatCAMGeoEditor.py:1418 AppEditors/FlatCAMGrbEditor.py:6056
#: AppTools/ToolTransform.py:801
msgid "Applying Skew"
msgstr "Execuţie Deformare"

#: AppEditors/FlatCAMGeoEditor.py:1441 AppEditors/FlatCAMGrbEditor.py:6090
msgid "Skew on the X axis done"
msgstr "Oglindire pe axa X executată"

#: AppEditors/FlatCAMGeoEditor.py:1443 AppEditors/FlatCAMGrbEditor.py:6092
msgid "Skew on the Y axis done"
msgstr "Oglindire pe axa Y executată"

#: AppEditors/FlatCAMGeoEditor.py:1446
msgid "Skew action was not executed"
msgstr "Actiunea de deformare nu a fost efectuată"

#: AppEditors/FlatCAMGeoEditor.py:1468 AppEditors/FlatCAMGrbEditor.py:6114
msgid "No shape selected. Please Select a shape to scale!"
msgstr ""
"Nici-o formă nu este selectată. Selectează o formă pentru a putea face "
"Scalare!"

#: AppEditors/FlatCAMGeoEditor.py:1471 AppEditors/FlatCAMGrbEditor.py:6117
#: AppTools/ToolTransform.py:847
msgid "Applying Scale"
msgstr "Execuţie Scalare"

#: AppEditors/FlatCAMGeoEditor.py:1503 AppEditors/FlatCAMGrbEditor.py:6154
msgid "Scale on the X axis done"
msgstr "Scalarea pe axa X executată"

#: AppEditors/FlatCAMGeoEditor.py:1505 AppEditors/FlatCAMGrbEditor.py:6156
msgid "Scale on the Y axis done"
msgstr "Scalarea pe axa Y executată"

#: AppEditors/FlatCAMGeoEditor.py:1507
msgid "Scale action was not executed"
msgstr "Scalarea nu a fost efectuată"

#: AppEditors/FlatCAMGeoEditor.py:1522 AppEditors/FlatCAMGrbEditor.py:6173
msgid "No shape selected. Please Select a shape to offset!"
msgstr ""
"Nici-o formă nu este selectată. Selectează o formă pentru a putea face Ofset!"

#: AppEditors/FlatCAMGeoEditor.py:1525 AppEditors/FlatCAMGrbEditor.py:6176
#: AppTools/ToolTransform.py:897
msgid "Applying Offset"
msgstr "Execuţie Ofset"

#: AppEditors/FlatCAMGeoEditor.py:1535 AppEditors/FlatCAMGrbEditor.py:6197
msgid "Offset on the X axis done"
msgstr "Ofset pe axa X efectuat"

#: AppEditors/FlatCAMGeoEditor.py:1537 AppEditors/FlatCAMGrbEditor.py:6199
msgid "Offset on the Y axis done"
msgstr "Ofset pe axa Y efectuat"

#: AppEditors/FlatCAMGeoEditor.py:1540
msgid "Offset action was not executed"
msgstr "Actiuena de Ofset nu a fost efectuată"

#: AppEditors/FlatCAMGeoEditor.py:1544 AppEditors/FlatCAMGrbEditor.py:6206
msgid "Rotate ..."
msgstr "Rotaţie ..."

#: AppEditors/FlatCAMGeoEditor.py:1545 AppEditors/FlatCAMGeoEditor.py:1600
#: AppEditors/FlatCAMGeoEditor.py:1617 AppEditors/FlatCAMGrbEditor.py:6207
#: AppEditors/FlatCAMGrbEditor.py:6256 AppEditors/FlatCAMGrbEditor.py:6271
msgid "Enter an Angle Value (degrees)"
msgstr "Introdu o valoare in grade pt Unghi"

#: AppEditors/FlatCAMGeoEditor.py:1554 AppEditors/FlatCAMGrbEditor.py:6215
msgid "Geometry shape rotate done"
msgstr "Rotatia formei geometrice executată"

#: AppEditors/FlatCAMGeoEditor.py:1558 AppEditors/FlatCAMGrbEditor.py:6218
msgid "Geometry shape rotate cancelled"
msgstr "Rotatia formei geometrice anulată"

#: AppEditors/FlatCAMGeoEditor.py:1563 AppEditors/FlatCAMGrbEditor.py:6223
msgid "Offset on X axis ..."
msgstr "Ofset pe axa X ..."

#: AppEditors/FlatCAMGeoEditor.py:1564 AppEditors/FlatCAMGeoEditor.py:1583
#: AppEditors/FlatCAMGrbEditor.py:6224 AppEditors/FlatCAMGrbEditor.py:6241
msgid "Enter a distance Value"
msgstr "Introdu of valoare pt Distantă"

#: AppEditors/FlatCAMGeoEditor.py:1573 AppEditors/FlatCAMGrbEditor.py:6232
msgid "Geometry shape offset on X axis done"
msgstr "Ofset pe axa X executat"

#: AppEditors/FlatCAMGeoEditor.py:1577 AppEditors/FlatCAMGrbEditor.py:6235
msgid "Geometry shape offset X cancelled"
msgstr "Ofset pe axa X anulat"

#: AppEditors/FlatCAMGeoEditor.py:1582 AppEditors/FlatCAMGrbEditor.py:6240
msgid "Offset on Y axis ..."
msgstr "Ofset pe axa Y ..."

#: AppEditors/FlatCAMGeoEditor.py:1592 AppEditors/FlatCAMGrbEditor.py:6249
msgid "Geometry shape offset on Y axis done"
msgstr "Ofset pe axa Y executat"

#: AppEditors/FlatCAMGeoEditor.py:1596
msgid "Geometry shape offset on Y axis canceled"
msgstr "Ofset pe axa Y anulat"

#: AppEditors/FlatCAMGeoEditor.py:1599 AppEditors/FlatCAMGrbEditor.py:6255
msgid "Skew on X axis ..."
msgstr "Deformare pe axa X ..."

#: AppEditors/FlatCAMGeoEditor.py:1609 AppEditors/FlatCAMGrbEditor.py:6264
msgid "Geometry shape skew on X axis done"
msgstr "Deformarea pe axa X executată"

#: AppEditors/FlatCAMGeoEditor.py:1613
msgid "Geometry shape skew on X axis canceled"
msgstr "Deformarea pe axa X anulată"

#: AppEditors/FlatCAMGeoEditor.py:1616 AppEditors/FlatCAMGrbEditor.py:6270
msgid "Skew on Y axis ..."
msgstr "Deformare pe axa Y ..."

#: AppEditors/FlatCAMGeoEditor.py:1626 AppEditors/FlatCAMGrbEditor.py:6279
msgid "Geometry shape skew on Y axis done"
msgstr "Deformarea pe axa Y executată"

#: AppEditors/FlatCAMGeoEditor.py:1630
msgid "Geometry shape skew on Y axis canceled"
msgstr "Deformarea pe axa Y anulată"

#: AppEditors/FlatCAMGeoEditor.py:2007 AppEditors/FlatCAMGeoEditor.py:2078
#: AppEditors/FlatCAMGrbEditor.py:1435 AppEditors/FlatCAMGrbEditor.py:1513
msgid "Click on Center point ..."
msgstr "Click pe punctul de Centru ..."

#: AppEditors/FlatCAMGeoEditor.py:2020 AppEditors/FlatCAMGrbEditor.py:1445
msgid "Click on Perimeter point to complete ..."
msgstr "Click pe un punct aflat pe Circumferintă pentru terminare ..."

#: AppEditors/FlatCAMGeoEditor.py:2052
msgid "Done. Adding Circle completed."
msgstr "Executat. Adăugarea unei forme Cerc terminată."

#: AppEditors/FlatCAMGeoEditor.py:2106 AppEditors/FlatCAMGrbEditor.py:1546
msgid "Click on Start point ..."
msgstr "Click pe punctul de Start ..."

#: AppEditors/FlatCAMGeoEditor.py:2108 AppEditors/FlatCAMGrbEditor.py:1548
msgid "Click on Point3 ..."
msgstr "Click pe Punctul3 ..."

#: AppEditors/FlatCAMGeoEditor.py:2110 AppEditors/FlatCAMGrbEditor.py:1550
msgid "Click on Stop point ..."
msgstr "Click pe punctulde Stop ..."

#: AppEditors/FlatCAMGeoEditor.py:2115 AppEditors/FlatCAMGrbEditor.py:1555
msgid "Click on Stop point to complete ..."
msgstr "Click pe punctul de Stop pentru terminare ..."

#: AppEditors/FlatCAMGeoEditor.py:2117 AppEditors/FlatCAMGrbEditor.py:1557
msgid "Click on Point2 to complete ..."
msgstr "Click pe Punctul2 pentru terminare ..."

#: AppEditors/FlatCAMGeoEditor.py:2119 AppEditors/FlatCAMGrbEditor.py:1559
msgid "Click on Center point to complete ..."
msgstr "Click pe punctul de Centru pentru terminare ..."

#: AppEditors/FlatCAMGeoEditor.py:2131
#, python-format
msgid "Direction: %s"
msgstr "Direcţie: %s"

#: AppEditors/FlatCAMGeoEditor.py:2145 AppEditors/FlatCAMGrbEditor.py:1585
msgid "Mode: Start -> Stop -> Center. Click on Start point ..."
msgstr "Mod: Start -> Stop -> Centru. Click pe punctul de Start ..."

#: AppEditors/FlatCAMGeoEditor.py:2148 AppEditors/FlatCAMGrbEditor.py:1588
msgid "Mode: Point1 -> Point3 -> Point2. Click on Point1 ..."
msgstr "Mod: Point1 -> Point3 -> Point2. Click pe Punctul1 ..."

#: AppEditors/FlatCAMGeoEditor.py:2151 AppEditors/FlatCAMGrbEditor.py:1591
msgid "Mode: Center -> Start -> Stop. Click on Center point ..."
msgstr "Mod: Center -> Start -> Stop. Click pe punctul de Centru ..."

#: AppEditors/FlatCAMGeoEditor.py:2292
msgid "Done. Arc completed."
msgstr "Executat. Adăugarea unei forme Arc terminată."

#: AppEditors/FlatCAMGeoEditor.py:2323 AppEditors/FlatCAMGeoEditor.py:2396
msgid "Click on 1st corner ..."
msgstr "Click pe primul colt ..."

#: AppEditors/FlatCAMGeoEditor.py:2335
msgid "Click on opposite corner to complete ..."
msgstr "Click pe punctul opus pentru terminare ..."

#: AppEditors/FlatCAMGeoEditor.py:2365
msgid "Done. Rectangle completed."
msgstr "Executat. Adăugare Pătrat terminată."

#: AppEditors/FlatCAMGeoEditor.py:2409 AppTools/ToolNCC.py:1734
#: AppTools/ToolPaint.py:1627 Common.py:303
msgid "Click on next Point or click right mouse button to complete ..."
msgstr ""
"Click pe punctul următor sau click buton dreapta al mousului pentru "
"terminare ..."

#: AppEditors/FlatCAMGeoEditor.py:2440
msgid "Done. Polygon completed."
msgstr "Executat. Adăugarea unei forme Poligon terminată."

#: AppEditors/FlatCAMGeoEditor.py:2454 AppEditors/FlatCAMGeoEditor.py:2519
#: AppEditors/FlatCAMGrbEditor.py:1111 AppEditors/FlatCAMGrbEditor.py:1322
msgid "Backtracked one point ..."
msgstr "Revenit la penultimul Punct ..."

#: AppEditors/FlatCAMGeoEditor.py:2497
msgid "Done. Path completed."
msgstr "Executat. Traseu finalizat."

#: AppEditors/FlatCAMGeoEditor.py:2656
msgid "No shape selected. Select a shape to explode"
msgstr "Nicio formă selectată. Selectați o formă pentru a o exploda"

#: AppEditors/FlatCAMGeoEditor.py:2689
msgid "Done. Polygons exploded into lines."
msgstr "Terminat. Poligoanele au fost descompuse în linii."

#: AppEditors/FlatCAMGeoEditor.py:2721
msgid "MOVE: No shape selected. Select a shape to move"
msgstr ""
"MUTARE: Nici-o formă nu este selectată. Selectează o formă pentru a putea "
"face deplasare"

#: AppEditors/FlatCAMGeoEditor.py:2724 AppEditors/FlatCAMGeoEditor.py:2744
msgid " MOVE: Click on reference point ..."
msgstr " MUTARE: Click pe punctul de referinţă ..."

#: AppEditors/FlatCAMGeoEditor.py:2729
msgid " Click on destination point ..."
msgstr " Click pe punctul de Destinaţie ..."

#: AppEditors/FlatCAMGeoEditor.py:2769
msgid "Done. Geometry(s) Move completed."
msgstr "Executat. Mutarea Geometriilor terminată."

#: AppEditors/FlatCAMGeoEditor.py:2902
msgid "Done. Geometry(s) Copy completed."
msgstr "Executat. Copierea Geometriilor terminată."

#: AppEditors/FlatCAMGeoEditor.py:2933 AppEditors/FlatCAMGrbEditor.py:897
msgid "Click on 1st point ..."
msgstr "Click pe primul punct ..."

#: AppEditors/FlatCAMGeoEditor.py:2957
msgid ""
"Font not supported. Only Regular, Bold, Italic and BoldItalic are supported. "
"Error"
msgstr ""
"Fontul nu este compatibil. Doar cele tip: Regular, Bold, Italic și "
"BoldItalic sunt acceptate. Eroarea"

#: AppEditors/FlatCAMGeoEditor.py:2965
msgid "No text to add."
msgstr "Niciun text de adăugat."

#: AppEditors/FlatCAMGeoEditor.py:2975
msgid " Done. Adding Text completed."
msgstr " Executat. Adăugarea de Text terminată."

#: AppEditors/FlatCAMGeoEditor.py:3012
msgid "Create buffer geometry ..."
msgstr "Crează o geometrie de tipe Bufer ..."

#: AppEditors/FlatCAMGeoEditor.py:3047 AppEditors/FlatCAMGrbEditor.py:5138
msgid "Done. Buffer Tool completed."
msgstr "Executat. Unealta Bufer terminată."

#: AppEditors/FlatCAMGeoEditor.py:3075
msgid "Done. Buffer Int Tool completed."
msgstr "Executat. Unealta Bufer Intern terminată."

#: AppEditors/FlatCAMGeoEditor.py:3103
msgid "Done. Buffer Ext Tool completed."
msgstr "Executat. Unealta Bufer Extern terminată."

#: AppEditors/FlatCAMGeoEditor.py:3152 AppEditors/FlatCAMGrbEditor.py:2151
msgid "Select a shape to act as deletion area ..."
msgstr "Selectează o formă geometrică ca formă de stergere ..."

#: AppEditors/FlatCAMGeoEditor.py:3154 AppEditors/FlatCAMGeoEditor.py:3180
#: AppEditors/FlatCAMGeoEditor.py:3186 AppEditors/FlatCAMGrbEditor.py:2153
msgid "Click to pick-up the erase shape..."
msgstr "Click pentru a activa forma de stergere..."

#: AppEditors/FlatCAMGeoEditor.py:3190 AppEditors/FlatCAMGrbEditor.py:2212
msgid "Click to erase ..."
msgstr "Click pt a sterge ..."

#: AppEditors/FlatCAMGeoEditor.py:3219 AppEditors/FlatCAMGrbEditor.py:2245
msgid "Done. Eraser tool action completed."
msgstr "Executat. Unealta Stergere s-a terminat."

#: AppEditors/FlatCAMGeoEditor.py:3269
msgid "Create Paint geometry ..."
msgstr "Crează o geometrie Paint ..."

#: AppEditors/FlatCAMGeoEditor.py:3282 AppEditors/FlatCAMGrbEditor.py:2408
msgid "Shape transformations ..."
msgstr "Transformări de forme geometrice ..."

#: AppEditors/FlatCAMGeoEditor.py:3338
#: AppGUI/preferences/geometry/GeometryEditorPrefGroupUI.py:27
msgid "Geometry Editor"
msgstr "Editor Geometrii"

#: AppEditors/FlatCAMGeoEditor.py:3344 AppEditors/FlatCAMGrbEditor.py:2486
#: AppEditors/FlatCAMGrbEditor.py:3943 AppGUI/ObjectUI.py:263
#: AppGUI/ObjectUI.py:1599 AppGUI/ObjectUI.py:2456 AppTools/ToolCutOut.py:95
msgid "Type"
msgstr "Tip"

#: AppEditors/FlatCAMGeoEditor.py:3344 AppGUI/ObjectUI.py:218
#: AppGUI/ObjectUI.py:742 AppGUI/ObjectUI.py:1535 AppGUI/ObjectUI.py:2365
#: AppGUI/ObjectUI.py:2669 AppGUI/ObjectUI.py:2736
#: AppTools/ToolCalibration.py:234 AppTools/ToolFiducials.py:73
msgid "Name"
msgstr "Nume"

#: AppEditors/FlatCAMGeoEditor.py:3596
msgid "Ring"
msgstr "Inel"

#: AppEditors/FlatCAMGeoEditor.py:3598
msgid "Line"
msgstr "Linie"

#: AppEditors/FlatCAMGeoEditor.py:3600 AppGUI/MainGUI.py:1403
#: AppGUI/ObjectUI.py:1371 AppGUI/ObjectUI.py:2205
#: AppGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:218
#: AppGUI/preferences/tools/ToolsNCCPrefGroupUI.py:328
#: AppGUI/preferences/tools/ToolsPaintPrefGroupUI.py:292
#: AppTools/ToolNCC.py:584 AppTools/ToolPaint.py:527
msgid "Polygon"
msgstr "Poligon"

#: AppEditors/FlatCAMGeoEditor.py:3602
msgid "Multi-Line"
msgstr "Multi-Linie"

#: AppEditors/FlatCAMGeoEditor.py:3604
msgid "Multi-Polygon"
msgstr "Multi-Poligon"

#: AppEditors/FlatCAMGeoEditor.py:3611
msgid "Geo Elem"
msgstr "Element Geo"

#: AppEditors/FlatCAMGeoEditor.py:4064
msgid "Editing MultiGeo Geometry, tool"
msgstr "Se editează Geometrie tip MultiGeo. unealta"

#: AppEditors/FlatCAMGeoEditor.py:4066
msgid "with diameter"
msgstr "cu diametrul"

#: AppEditors/FlatCAMGeoEditor.py:4501 AppGUI/MainGUI.py:2967
#: AppGUI/MainGUI.py:3013 AppGUI/MainGUI.py:3031 AppGUI/MainGUI.py:3175
#: AppGUI/MainGUI.py:3214 AppGUI/MainGUI.py:3226 AppGUI/MainGUI.py:3243
msgid "Click on target point."
msgstr "Click pe punctul tinta."

#: AppEditors/FlatCAMGeoEditor.py:4815 AppEditors/FlatCAMGeoEditor.py:4850
msgid "A selection of at least 2 geo items is required to do Intersection."
msgstr ""
"Cel puțin o selecţie de doua forme geometrice este necesară pentru a face o "
"Intersecţie."

#: AppEditors/FlatCAMGeoEditor.py:4936 AppEditors/FlatCAMGeoEditor.py:5040
msgid ""
"Negative buffer value is not accepted. Use Buffer interior to generate an "
"'inside' shape"
msgstr ""
"O valoare de bufer negativă nu se acceptă. Foloseste Bufer Interior pentru a "
"genera o formă geo. interioară"

#: AppEditors/FlatCAMGeoEditor.py:4946 AppEditors/FlatCAMGeoEditor.py:4999
#: AppEditors/FlatCAMGeoEditor.py:5049
msgid "Nothing selected for buffering."
msgstr "Nici-o forma geometrică nu este selectată pentru a face Bufer."

#: AppEditors/FlatCAMGeoEditor.py:4951 AppEditors/FlatCAMGeoEditor.py:5003
#: AppEditors/FlatCAMGeoEditor.py:5054
msgid "Invalid distance for buffering."
msgstr "Distanta invalida pentru a face Bufer."

#: AppEditors/FlatCAMGeoEditor.py:4975 AppEditors/FlatCAMGeoEditor.py:5074
msgid "Failed, the result is empty. Choose a different buffer value."
msgstr "Eșuat, rezultatul este gol. Foloseşte o valoare diferita pentru Bufer."

#: AppEditors/FlatCAMGeoEditor.py:4986
msgid "Full buffer geometry created."
msgstr "Geometrie tip Bufer Complet creată."

#: AppEditors/FlatCAMGeoEditor.py:4992
msgid "Negative buffer value is not accepted."
msgstr "Valoarea bufer negativă nu este acceptată."

#: AppEditors/FlatCAMGeoEditor.py:5023
msgid "Failed, the result is empty. Choose a smaller buffer value."
msgstr "Eșuat, rezultatul este gol. Foloseşte of valoare mai mica pt. Bufer."

#: AppEditors/FlatCAMGeoEditor.py:5033
msgid "Interior buffer geometry created."
msgstr "Geometrie Bufer interior creată."

#: AppEditors/FlatCAMGeoEditor.py:5084
msgid "Exterior buffer geometry created."
msgstr "Geometrie Bufer Exterior creată."

#: AppEditors/FlatCAMGeoEditor.py:5090
#, python-format
msgid "Could not do Paint. Overlap value has to be less than 100%%."
msgstr ""
"Nu se poate face Paint. Valoarea de suprapunere trebuie să fie mai puțin de "
"100%%."

#: AppEditors/FlatCAMGeoEditor.py:5097
msgid "Nothing selected for painting."
msgstr "Nici-o forma geometrică nu este selectată pentru Paint."

#: AppEditors/FlatCAMGeoEditor.py:5103
msgid "Invalid value for"
msgstr "Valoare invalida pentru"

#: AppEditors/FlatCAMGeoEditor.py:5162
msgid ""
"Could not do Paint. Try a different combination of parameters. Or a "
"different method of Paint"
msgstr ""
"Nu se poate face Paint. Incearcă o combinaţie diferita de parametri. Or o "
"metoda diferita de Paint"

#: AppEditors/FlatCAMGeoEditor.py:5173
msgid "Paint done."
msgstr "Pictare executata."

#: AppEditors/FlatCAMGrbEditor.py:211
msgid "To add an Pad first select a aperture in Aperture Table"
msgstr ""
"Pentru a adăuga un Pad mai intai selectează o apertură (unealtă) in Tabela "
"de Aperturi"

#: AppEditors/FlatCAMGrbEditor.py:218 AppEditors/FlatCAMGrbEditor.py:418
msgid "Aperture size is zero. It needs to be greater than zero."
msgstr "Dimens. aperturii este zero. Trebuie sa fie mai mare ca zero."

#: AppEditors/FlatCAMGrbEditor.py:371 AppEditors/FlatCAMGrbEditor.py:684
msgid ""
"Incompatible aperture type. Select an aperture with type 'C', 'R' or 'O'."
msgstr ""
"Tip de apertură incompatibil. Selectează o apertură cu tipul 'C', 'R' sau "
"'O'."

#: AppEditors/FlatCAMGrbEditor.py:383
msgid "Done. Adding Pad completed."
msgstr "Executat. Adăugarea padului terminată."

#: AppEditors/FlatCAMGrbEditor.py:410
msgid "To add an Pad Array first select a aperture in Aperture Table"
msgstr ""
"Pentru a adăuga o arie de paduri mai intai selectează o apertura (unealtă) "
"in Tabela de Aperturi"

#: AppEditors/FlatCAMGrbEditor.py:490
msgid "Click on the Pad Circular Array Start position"
msgstr "Click pe punctul de Start al ariei de paduri"

#: AppEditors/FlatCAMGrbEditor.py:710
msgid "Too many Pads for the selected spacing angle."
msgstr "Prea multe paduri pentru unghiul selectat."

#: AppEditors/FlatCAMGrbEditor.py:733
msgid "Done. Pad Array added."
msgstr "Executat. Aria de paduri a fost adăugată."

#: AppEditors/FlatCAMGrbEditor.py:758
msgid "Select shape(s) and then click ..."
msgstr "Selectează formele si apoi click ..."

#: AppEditors/FlatCAMGrbEditor.py:770
msgid "Failed. Nothing selected."
msgstr "Eșuat. Nu este nimic selectat."

#: AppEditors/FlatCAMGrbEditor.py:786
msgid ""
"Failed. Poligonize works only on geometries belonging to the same aperture."
msgstr ""
"Esuat. Poligonizarea lucrează doar asupra geometriilor care apartin aceleasi "
"aperturi."

#: AppEditors/FlatCAMGrbEditor.py:840
msgid "Done. Poligonize completed."
msgstr "Executat. Poligonizare completă."

#: AppEditors/FlatCAMGrbEditor.py:895 AppEditors/FlatCAMGrbEditor.py:1128
#: AppEditors/FlatCAMGrbEditor.py:1152
msgid "Corner Mode 1: 45 degrees ..."
msgstr "Mod Colt 1: 45 grade ..."

#: AppEditors/FlatCAMGrbEditor.py:907 AppEditors/FlatCAMGrbEditor.py:1237
msgid "Click on next Point or click Right mouse button to complete ..."
msgstr ""
"Click pe punctul următor sau click buton dreapta al mousului pentru "
"terminare ..."

#: AppEditors/FlatCAMGrbEditor.py:1116 AppEditors/FlatCAMGrbEditor.py:1149
msgid "Corner Mode 2: Reverse 45 degrees ..."
msgstr "Mod Colt 2: Invers 45 grade ..."

#: AppEditors/FlatCAMGrbEditor.py:1119 AppEditors/FlatCAMGrbEditor.py:1146
msgid "Corner Mode 3: 90 degrees ..."
msgstr "Mod Colt 3: 90 grade ..."

#: AppEditors/FlatCAMGrbEditor.py:1122 AppEditors/FlatCAMGrbEditor.py:1143
msgid "Corner Mode 4: Reverse 90 degrees ..."
msgstr "Mod Colt 4: Invers 90 grade ..."

#: AppEditors/FlatCAMGrbEditor.py:1125 AppEditors/FlatCAMGrbEditor.py:1140
msgid "Corner Mode 5: Free angle ..."
msgstr "Mod Colt 5: Unghi liber ..."

#: AppEditors/FlatCAMGrbEditor.py:1182 AppEditors/FlatCAMGrbEditor.py:1358
#: AppEditors/FlatCAMGrbEditor.py:1397
msgid "Track Mode 1: 45 degrees ..."
msgstr "Mod Traseu 1: 45 grade ..."

#: AppEditors/FlatCAMGrbEditor.py:1338 AppEditors/FlatCAMGrbEditor.py:1392
msgid "Track Mode 2: Reverse 45 degrees ..."
msgstr "Mod Traseu 2: Invers 45 grade ..."

#: AppEditors/FlatCAMGrbEditor.py:1343 AppEditors/FlatCAMGrbEditor.py:1387
msgid "Track Mode 3: 90 degrees ..."
msgstr "Mod Traseu 3: 90 grade ..."

#: AppEditors/FlatCAMGrbEditor.py:1348 AppEditors/FlatCAMGrbEditor.py:1382
msgid "Track Mode 4: Reverse 90 degrees ..."
msgstr "Mod Traseu 4: Invers 90 grade ..."

#: AppEditors/FlatCAMGrbEditor.py:1353 AppEditors/FlatCAMGrbEditor.py:1377
msgid "Track Mode 5: Free angle ..."
msgstr "Mod Traseu 5: Unghi liber ..."

#: AppEditors/FlatCAMGrbEditor.py:1778
msgid "Scale the selected Gerber apertures ..."
msgstr "Șterge aperturile Gerber selectate ..."

#: AppEditors/FlatCAMGrbEditor.py:1820
msgid "Buffer the selected apertures ..."
msgstr "Bufereaza aperturile selectate."

#: AppEditors/FlatCAMGrbEditor.py:1862
msgid "Mark polygon areas in the edited Gerber ..."
msgstr "Marchează ariile poligonale in obiectul Gerber editat ..."

#: AppEditors/FlatCAMGrbEditor.py:1928
msgid "Nothing selected to move"
msgstr "Nimic nu este selectat pentru mutare"

#: AppEditors/FlatCAMGrbEditor.py:2053
msgid "Done. Apertures Move completed."
msgstr "Executat. Mutarea Aperturilor terminată."

#: AppEditors/FlatCAMGrbEditor.py:2135
msgid "Done. Apertures copied."
msgstr "Executat. Aperturile au fost copiate."

#: AppEditors/FlatCAMGrbEditor.py:2453 AppGUI/MainGUI.py:1434
#: AppGUI/preferences/gerber/GerberEditorPrefGroupUI.py:27
msgid "Gerber Editor"
msgstr "Editor Gerber"

#: AppEditors/FlatCAMGrbEditor.py:2473 AppGUI/ObjectUI.py:228
#: AppTools/ToolProperties.py:159
msgid "Apertures"
msgstr "Aperturi"

#: AppEditors/FlatCAMGrbEditor.py:2475 AppGUI/ObjectUI.py:230
msgid "Apertures Table for the Gerber Object."
msgstr "Tabela de aperturi pt obiectul Gerber."

#: AppEditors/FlatCAMGrbEditor.py:2486 AppEditors/FlatCAMGrbEditor.py:3943
#: AppGUI/ObjectUI.py:263
msgid "Code"
msgstr "Cod"

#: AppEditors/FlatCAMGrbEditor.py:2486 AppEditors/FlatCAMGrbEditor.py:3943
#: AppGUI/ObjectUI.py:263
#: AppGUI/preferences/general/GeneralAPPSetGroupUI.py:103
#: AppGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:167
#: AppGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:196
#: AppGUI/preferences/tools/Tools2FiducialsPrefGroupUI.py:43
#: AppTools/ToolCopperThieving.py:261 AppTools/ToolCopperThieving.py:301
#: AppTools/ToolFiducials.py:156
msgid "Size"
msgstr "Dimensiune"

#: AppEditors/FlatCAMGrbEditor.py:2486 AppEditors/FlatCAMGrbEditor.py:3943
#: AppGUI/ObjectUI.py:263
msgid "Dim"
msgstr "Dim"

#: AppEditors/FlatCAMGrbEditor.py:2491 AppGUI/ObjectUI.py:267
msgid "Index"
msgstr "Index"

#: AppEditors/FlatCAMGrbEditor.py:2493 AppEditors/FlatCAMGrbEditor.py:2522
#: AppGUI/ObjectUI.py:269
msgid "Aperture Code"
msgstr "Cod"

#: AppEditors/FlatCAMGrbEditor.py:2495 AppGUI/ObjectUI.py:271
msgid "Type of aperture: circular, rectangle, macros etc"
msgstr ""
"Tipul aperturilor:\n"
"- circular\n"
"- patrulater\n"
"- macro-uri\n"
"etc"

#: AppEditors/FlatCAMGrbEditor.py:2497 AppGUI/ObjectUI.py:273
msgid "Aperture Size:"
msgstr "Dim. aper.:"

#: AppEditors/FlatCAMGrbEditor.py:2499 AppGUI/ObjectUI.py:275
msgid ""
"Aperture Dimensions:\n"
" - (width, height) for R, O type.\n"
" - (dia, nVertices) for P type"
msgstr ""
"Dimensiunile aperturilor:\n"
"- (latime, inaltime) pt tipurile R, O.\n"
"- (diametru, nVertices) pt tipul P"

#: AppEditors/FlatCAMGrbEditor.py:2523
#: AppGUI/preferences/gerber/GerberEditorPrefGroupUI.py:58
msgid "Code for the new aperture"
msgstr "Diametru pentru noua apertură"

#: AppEditors/FlatCAMGrbEditor.py:2532
msgid "Aperture Size"
msgstr "Dim. aper"

#: AppEditors/FlatCAMGrbEditor.py:2534
msgid ""
"Size for the new aperture.\n"
"If aperture type is 'R' or 'O' then\n"
"this value is automatically\n"
"calculated as:\n"
"sqrt(width**2 + height**2)"
msgstr ""
"Dimensiunea pt noua apertură.\n"
"Dacă tipul aperturii este 'R' sau 'O'\n"
"valoarea este calculată automat prin:\n"
"sqrt(lătime**2 + inăltime**2)"

#: AppEditors/FlatCAMGrbEditor.py:2548
msgid "Aperture Type"
msgstr "Tip aper"

#: AppEditors/FlatCAMGrbEditor.py:2550
msgid ""
"Select the type of new aperture. Can be:\n"
"C = circular\n"
"R = rectangular\n"
"O = oblong"
msgstr ""
"Selectează noul tip de apertură. Poate fi:\n"
"C = circular\n"
"R = rectangular\n"
"O = oval"

#: AppEditors/FlatCAMGrbEditor.py:2561
msgid "Aperture Dim"
msgstr "Dim. aper"

#: AppEditors/FlatCAMGrbEditor.py:2563
msgid ""
"Dimensions for the new aperture.\n"
"Active only for rectangular apertures (type R).\n"
"The format is (width, height)"
msgstr ""
"Dimensiunile pentru noua apertură.\n"
"Activă doar pentru aperturile rectangulare (tip 'R').\n"
"Formatul este (lătime, inăltime)"

#: AppEditors/FlatCAMGrbEditor.py:2572
msgid "Add/Delete Aperture"
msgstr "Adaugă/Șterge apertură"

#: AppEditors/FlatCAMGrbEditor.py:2574
msgid "Add/Delete an aperture in the aperture table"
msgstr "Adaugă/Șterge o apertură din lista de aperturi"

#: AppEditors/FlatCAMGrbEditor.py:2583
msgid "Add a new aperture to the aperture list."
msgstr "Adaugă o nouă apertură in lista de aperturi."

#: AppEditors/FlatCAMGrbEditor.py:2586 AppEditors/FlatCAMGrbEditor.py:2734
#: AppGUI/MainGUI.py:753 AppGUI/MainGUI.py:1069 AppGUI/MainGUI.py:1485
#: AppGUI/MainGUI.py:2030 AppGUI/MainGUI.py:4400 AppGUI/ObjectUI.py:1725
#: AppObjects/FlatCAMGeometry.py:556 AppTools/ToolNCC.py:316
#: AppTools/ToolNCC.py:637 AppTools/ToolPaint.py:298 AppTools/ToolPaint.py:681
#: AppTools/ToolSolderPaste.py:128 AppTools/ToolSolderPaste.py:600
#: App_Main.py:5845
msgid "Delete"
msgstr "Șterge"

#: AppEditors/FlatCAMGrbEditor.py:2588
msgid "Delete a aperture in the aperture list"
msgstr "Șterge o apertură din lista de aperturi"

#: AppEditors/FlatCAMGrbEditor.py:2605
msgid "Buffer Aperture"
msgstr "Bufer pt apertură"

#: AppEditors/FlatCAMGrbEditor.py:2607
msgid "Buffer a aperture in the aperture list"
msgstr "Fă bufer pt o apertură din lista de aperturi"

#: AppEditors/FlatCAMGrbEditor.py:2620
#: AppGUI/preferences/gerber/GerberEditorPrefGroupUI.py:194
msgid "Buffer distance"
msgstr "Distanta pt bufer"

#: AppEditors/FlatCAMGrbEditor.py:2621
msgid "Buffer corner"
msgstr "Coltul pt bufer"

#: AppEditors/FlatCAMGrbEditor.py:2623
msgid ""
"There are 3 types of corners:\n"
" - 'Round': the corner is rounded.\n"
" - 'Square': the corner is met in a sharp angle.\n"
" - 'Beveled': the corner is a line that directly connects the features "
"meeting in the corner"
msgstr ""
"Sunt disponibile 3 tipuri de colțuri:\n"
"- 'Rotund': coltul este rotunjit.\n"
"- 'Patrat:' colțurile formează unghi de 90 grade.\n"
"- 'Beveled:' coltul este inlocuit cu o linie care uneste capetele liniilor "
"care formează coltul"

#: AppEditors/FlatCAMGrbEditor.py:2638 AppGUI/MainGUI.py:1056
#: AppGUI/MainGUI.py:1411 AppGUI/MainGUI.py:1454 AppGUI/MainGUI.py:2018
#: AppGUI/MainGUI.py:4397
#: AppGUI/preferences/tools/ToolsTransformPrefGroupUI.py:200
#: AppTools/ToolTransform.py:29
msgid "Buffer"
msgstr "Bufer"

#: AppEditors/FlatCAMGrbEditor.py:2653
msgid "Scale Aperture"
msgstr "Scalează aper"

#: AppEditors/FlatCAMGrbEditor.py:2655
msgid "Scale a aperture in the aperture list"
msgstr "Scalează o apertură in lista de aperturi"

#: AppEditors/FlatCAMGrbEditor.py:2663
#: AppGUI/preferences/gerber/GerberEditorPrefGroupUI.py:209
msgid "Scale factor"
msgstr "Factor Scalare"

#: AppEditors/FlatCAMGrbEditor.py:2665
msgid ""
"The factor by which to scale the selected aperture.\n"
"Values can be between 0.0000 and 999.9999"
msgstr ""
"Factorul cu care se va face scalarea aperturii selectate.\n"
"Poate lua valori intre: 0.000 si 999.9999"

#: AppEditors/FlatCAMGrbEditor.py:2693
msgid "Mark polygons"
msgstr "Marchează poligoanele"

#: AppEditors/FlatCAMGrbEditor.py:2695
msgid "Mark the polygon areas."
msgstr "Marchează ariile poligonale."

#: AppEditors/FlatCAMGrbEditor.py:2703
msgid "Area UPPER threshold"
msgstr "Pragul de sus pt. arie"

#: AppEditors/FlatCAMGrbEditor.py:2705
msgid ""
"The threshold value, all areas less than this are marked.\n"
"Can have a value between 0.0000 and 9999.9999"
msgstr ""
"Valoare de prag, toate poligoanele cu arii mai mici vor fi marcate.\n"
"Poate lua valori intre: 0.000 si 999.9999"

#: AppEditors/FlatCAMGrbEditor.py:2712
msgid "Area LOWER threshold"
msgstr "Pragul de jos pt. arie"

#: AppEditors/FlatCAMGrbEditor.py:2714
msgid ""
"The threshold value, all areas more than this are marked.\n"
"Can have a value between 0.0000 and 9999.9999"
msgstr ""
"Valoare de prag, toate poligoanele cu arii mai mari vor fi marcate.\n"
"Poate lua valori intre: 0.000 si 999.9999"

#: AppEditors/FlatCAMGrbEditor.py:2728
msgid "Mark"
msgstr "Marchează"

#: AppEditors/FlatCAMGrbEditor.py:2730
msgid "Mark the polygons that fit within limits."
msgstr "Marcați poligoanele care se încadrează în limite."

#: AppEditors/FlatCAMGrbEditor.py:2736
msgid "Delete all the marked polygons."
msgstr "Ștergeți toate poligoanele marcate."

#: AppEditors/FlatCAMGrbEditor.py:2742
msgid "Clear all the markings."
msgstr "Ștergeți toate marcajele."

#: AppEditors/FlatCAMGrbEditor.py:2762 AppGUI/MainGUI.py:1041
#: AppGUI/MainGUI.py:2003 AppGUI/MainGUI.py:4397
msgid "Add Pad Array"
msgstr "Adaugă o arie de paduri"

#: AppEditors/FlatCAMGrbEditor.py:2764
msgid "Add an array of pads (linear or circular array)"
msgstr "Adaugă o arie de paduri (arie lineara sau circulara)."

#: AppEditors/FlatCAMGrbEditor.py:2770
msgid ""
"Select the type of pads array to create.\n"
"It can be Linear X(Y) or Circular"
msgstr ""
"Selectează tipul de arii de paduri.\n"
"Poate fi Liniar X(Y) sau Circular"

#: AppEditors/FlatCAMGrbEditor.py:2781
#: AppGUI/preferences/gerber/GerberEditorPrefGroupUI.py:95
msgid "Nr of pads"
msgstr "Nr. paduri"

#: AppEditors/FlatCAMGrbEditor.py:2783
#: AppGUI/preferences/gerber/GerberEditorPrefGroupUI.py:97
msgid "Specify how many pads to be in the array."
msgstr "Specifica cate paduri să fie incluse in arie."

#: AppEditors/FlatCAMGrbEditor.py:2832
msgid ""
"Angle at which the linear array is placed.\n"
"The precision is of max 2 decimals.\n"
"Min value is: -359.99 degrees.\n"
"Max value is:  360.00 degrees."
msgstr ""
"Unghiul global la care aria lineara este plasata.\n"
"Precizia este de max 2 zecimale.\n"
"Val minima este: -359.99 grade.\n"
"Val maxima este:  360.00 grade."

#: AppEditors/FlatCAMGrbEditor.py:3326 AppEditors/FlatCAMGrbEditor.py:3330
msgid "Aperture code value is missing or wrong format. Add it and retry."
msgstr ""
"Valoarea codului aperturii lipseste sau este in format greșit. Adaugă din "
"nou și reîncearcă."

#: AppEditors/FlatCAMGrbEditor.py:3366
msgid ""
"Aperture dimensions value is missing or wrong format. Add it in format "
"(width, height) and retry."
msgstr ""
"Dimensiunile aperturii lipsesc sau sunt intr-un format greșit. Adaugă din "
"nou și reîncearcă."

#: AppEditors/FlatCAMGrbEditor.py:3379
msgid "Aperture size value is missing or wrong format. Add it and retry."
msgstr ""
"Valoarea mărimii aperturii lipseste sau este in format greșit. Adaugă din "
"nou și reîncearcă."

#: AppEditors/FlatCAMGrbEditor.py:3390
msgid "Aperture already in the aperture table."
msgstr "Apertura este deja in lista de aperturi."

#: AppEditors/FlatCAMGrbEditor.py:3397
msgid "Added new aperture with code"
msgstr "O nouă apertură este adăugată cu codul"

#: AppEditors/FlatCAMGrbEditor.py:3429
msgid " Select an aperture in Aperture Table"
msgstr " Selectează o unealtă in Tabela de Aperturi"

#: AppEditors/FlatCAMGrbEditor.py:3437
msgid "Select an aperture in Aperture Table -->"
msgstr "Selectează o unealtă in Tabela de Aperturi -->"

#: AppEditors/FlatCAMGrbEditor.py:3451
msgid "Deleted aperture with code"
msgstr "A fost stearsă unealta cu codul"

#: AppEditors/FlatCAMGrbEditor.py:3519
msgid "Dimensions need two float values separated by comma."
msgstr "Dimensiunile au nevoie de două valori float separate prin virgulă."

#: AppEditors/FlatCAMGrbEditor.py:3528
msgid "Dimensions edited."
msgstr "Dimensiuni editate."

#: AppEditors/FlatCAMGrbEditor.py:4058
msgid "Loading Gerber into Editor"
msgstr "Se încarcă Gerber în editor"

#: AppEditors/FlatCAMGrbEditor.py:4186
msgid "Setting up the UI"
msgstr "Configurarea UI"

#: AppEditors/FlatCAMGrbEditor.py:4187
#, fuzzy
#| msgid "Adding geometry finished. Preparing the GUI"
msgid "Adding geometry finished. Preparing the AppGUI"
msgstr "Adăugarea geometriei terminate. Pregătirea GUI"

#: AppEditors/FlatCAMGrbEditor.py:4196
msgid "Finished loading the Gerber object into the editor."
msgstr "S-a terminat încărcarea obiectului Gerber în editor."

#: AppEditors/FlatCAMGrbEditor.py:4335
msgid ""
"There are no Aperture definitions in the file. Aborting Gerber creation."
msgstr ""
"Nu există definitii de aperturi in fişier. Se anulează crearea de obiect "
"Gerber."

#: AppEditors/FlatCAMGrbEditor.py:4338 AppObjects/AppObject.py:132
#: AppObjects/FlatCAMGeometry.py:1775 AppParsers/ParseExcellon.py:896
#: AppTools/ToolPcbWizard.py:432 App_Main.py:8619 App_Main.py:8683
#: App_Main.py:8814 App_Main.py:8879 App_Main.py:9531
msgid "An internal error has occurred. See shell.\n"
msgstr ""
"A apărut o eroare internă. Verifică in TCL Shell pt mai multe detalii.\n"

#: AppEditors/FlatCAMGrbEditor.py:4345
msgid "Creating Gerber."
msgstr "Gerber in curs de creare."

#: AppEditors/FlatCAMGrbEditor.py:4354
msgid "Done. Gerber editing finished."
msgstr "Editarea Gerber a fost terminată."

#: AppEditors/FlatCAMGrbEditor.py:4372
msgid "Cancelled. No aperture is selected"
msgstr "Anulat. Nici-o apertură nu este selectată"

#: AppEditors/FlatCAMGrbEditor.py:4527 App_Main.py:6171
msgid "Coordinates copied to clipboard."
msgstr "Coordonatele au fost copiate in clipboard."

#: AppEditors/FlatCAMGrbEditor.py:4970
msgid "Failed. No aperture geometry is selected."
msgstr "Anulat. Nici-o geometrie de apertură nu este selectată."

#: AppEditors/FlatCAMGrbEditor.py:4979 AppEditors/FlatCAMGrbEditor.py:5250
msgid "Done. Apertures geometry deleted."
msgstr "Executat. Geometriile aperturilor au fost șterse."

#: AppEditors/FlatCAMGrbEditor.py:5122
msgid "No aperture to buffer. Select at least one aperture and try again."
msgstr ""
"Nici-o apertură sel. pt a face bufer. Selectează cel puțin o apertură și "
"încearcă din nou."

#: AppEditors/FlatCAMGrbEditor.py:5134
msgid "Failed."
msgstr "Esuat."

#: AppEditors/FlatCAMGrbEditor.py:5153
msgid "Scale factor value is missing or wrong format. Add it and retry."
msgstr ""
"Valoarea factorului de scalare lipseste sau este in format gresit. Adaugă "
"din nou și reîncearcă."

#: AppEditors/FlatCAMGrbEditor.py:5185
msgid "No aperture to scale. Select at least one aperture and try again."
msgstr ""
"Nici-o apertură sel. pt scalare. Selectează cel puțin o apertură și încearcă "
"din nou."

#: AppEditors/FlatCAMGrbEditor.py:5201
msgid "Done. Scale Tool completed."
msgstr "Executat. Unealta Scalare a terminat."

#: AppEditors/FlatCAMGrbEditor.py:5239
msgid "Polygons marked."
msgstr "Poligoanele sunt marcate."

#: AppEditors/FlatCAMGrbEditor.py:5242
msgid "No polygons were marked. None fit within the limits."
msgstr "Nu au fost marcate poligoane. Niciunul nu se încadrează în limite."

#: AppEditors/FlatCAMGrbEditor.py:5966
msgid "Rotation action was not executed."
msgstr "Actiuena de rotatie nu a fost efectuatăt."

#: AppEditors/FlatCAMGrbEditor.py:6037 App_Main.py:5604 App_Main.py:5652
msgid "Flip action was not executed."
msgstr "Acțiunea de Oglindire nu a fost executată."

#: AppEditors/FlatCAMGrbEditor.py:6094
msgid "Skew action was not executed."
msgstr "Actiunea de deformare nu a fost efectuată."

#: AppEditors/FlatCAMGrbEditor.py:6159
msgid "Scale action was not executed."
msgstr "Actiuena de scalare nu a fost efectuată."

#: AppEditors/FlatCAMGrbEditor.py:6202
msgid "Offset action was not executed."
msgstr "Actiuena de offset nu a fost efectuată."

#: AppEditors/FlatCAMGrbEditor.py:6252
msgid "Geometry shape offset Y cancelled"
msgstr "Deplasarea formei geometrice pe axa Y anulată"

#: AppEditors/FlatCAMGrbEditor.py:6267
msgid "Geometry shape skew X cancelled"
msgstr "Deformarea formei geometrice pe axa X anulată"

#: AppEditors/FlatCAMGrbEditor.py:6282
msgid "Geometry shape skew Y cancelled"
msgstr "Deformarea formei geometrice pe axa Y executată"

#: AppEditors/FlatCAMTextEditor.py:74
msgid "Print Preview"
msgstr "Preview tiparire"

#: AppEditors/FlatCAMTextEditor.py:75
msgid "Open a OS standard Preview Print window."
msgstr "Deschide o fereastra standard a OS cu Previzualizare Tiparire."

#: AppEditors/FlatCAMTextEditor.py:78
msgid "Print Code"
msgstr "Tipareste Cod"

#: AppEditors/FlatCAMTextEditor.py:79
msgid "Open a OS standard Print window."
msgstr "Deschide o fereastra standard a OS pt Tiparire."

#: AppEditors/FlatCAMTextEditor.py:81
msgid "Find in Code"
msgstr "Cauta in Cod"

#: AppEditors/FlatCAMTextEditor.py:82
msgid "Will search and highlight in yellow the string in the Find box."
msgstr "Va cauta si va sublinia in galben acele stringuri din campul Cautare."

#: AppEditors/FlatCAMTextEditor.py:86
msgid "Find box. Enter here the strings to be searched in the text."
msgstr ""
"Campul Cautare. Introduceti aici acele stringuri care sa fie cautate in text."

#: AppEditors/FlatCAMTextEditor.py:88
msgid "Replace With"
msgstr "Inlocuieste cu"

#: AppEditors/FlatCAMTextEditor.py:89
msgid ""
"Will replace the string from the Find box with the one in the Replace box."
msgstr ""
"Va inlocui toate cuvintele gasite conform cu ce este in 'Căutare'\n"
"cu textul din casuta 'Inlocuieste'."

#: AppEditors/FlatCAMTextEditor.py:93
msgid "String to replace the one in the Find box throughout the text."
msgstr ""
"String care sa inlocuiasca pe acele din campul 'Cautare' in cadrul textului."

#: AppEditors/FlatCAMTextEditor.py:95 AppGUI/ObjectUI.py:486
#: AppGUI/ObjectUI.py:2349 AppGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:54
#: AppGUI/preferences/gerber/GerberOptPrefGroupUI.py:88
msgid "All"
msgstr "Toate"

#: AppEditors/FlatCAMTextEditor.py:96
msgid ""
"When checked it will replace all instances in the 'Find' box\n"
"with the text in the 'Replace' box.."
msgstr ""
"Când este bifat, va inlocui toate cuvintele gasite conform cu ce este in "
"'Caută'\n"
"cu textul din casuta 'Inlocuieste'..."

#: AppEditors/FlatCAMTextEditor.py:99
msgid "Copy All"
msgstr "Copiază tot"

#: AppEditors/FlatCAMTextEditor.py:100
msgid "Will copy all the text in the Code Editor to the clipboard."
msgstr "Va copia textul din editorul de cod în clipboard."

#: AppEditors/FlatCAMTextEditor.py:103
msgid "Open Code"
msgstr "Deschide Cod"

#: AppEditors/FlatCAMTextEditor.py:104
msgid "Will open a text file in the editor."
msgstr "Va deschide un fisier text in Editor."

#: AppEditors/FlatCAMTextEditor.py:106
msgid "Save Code"
msgstr "Salvează Cod"

#: AppEditors/FlatCAMTextEditor.py:107
msgid "Will save the text in the editor into a file."
msgstr "Va salva textul din Editor intr-un fisier."

#: AppEditors/FlatCAMTextEditor.py:109
msgid "Run Code"
msgstr "Rulează Cod"

#: AppEditors/FlatCAMTextEditor.py:110
msgid "Will run the TCL commands found in the text file, one by one."
msgstr ""
"Va rula instructiunile/comenzile TCL care se găsesc in textul din Editor, "
"una cate una."

#: AppEditors/FlatCAMTextEditor.py:184
msgid "Open file"
msgstr "Deschide fişierul"

#: AppEditors/FlatCAMTextEditor.py:215 AppEditors/FlatCAMTextEditor.py:220
msgid "Export Code ..."
msgstr "Exportă GCode ..."

#: AppEditors/FlatCAMTextEditor.py:272 AppObjects/FlatCAMCNCJob.py:955
#: AppTools/ToolSolderPaste.py:1530
msgid "No such file or directory"
msgstr "Nu exista un aşa fişier sau director"

#: AppEditors/FlatCAMTextEditor.py:284 AppObjects/FlatCAMCNCJob.py:969
msgid "Saved to"
msgstr "Salvat in"

#: AppEditors/FlatCAMTextEditor.py:334
msgid "Code Editor content copied to clipboard ..."
msgstr "Conținut Editor de cod copiat în clipboard ..."

#: AppGUI/GUIElements.py:2540
#: AppGUI/preferences/tools/ToolsFilmPrefGroupUI.py:180
#: AppTools/ToolDblSided.py:173 AppTools/ToolDblSided.py:388
#: AppTools/ToolFilm.py:202
msgid "Reference"
msgstr "Referinţă"

#: AppGUI/GUIElements.py:2542
msgid ""
"The reference can be:\n"
"- Absolute -> the reference point is point (0,0)\n"
"- Relative -> the reference point is the mouse position before Jump"
msgstr ""
"Referința poate fi:\n"
"- Absolut -> punctul de referință este punctul (0,0)\n"
"- Relativ -> punctul de referință este poziția mouse-ului înainte de Salt"

#: AppGUI/GUIElements.py:2547
msgid "Abs"
msgstr "Abs"

#: AppGUI/GUIElements.py:2548
msgid "Relative"
msgstr "Relativ"

#: AppGUI/GUIElements.py:2558
msgid "Location"
msgstr "Locaţie"

#: AppGUI/GUIElements.py:2560
msgid ""
"The Location value is a tuple (x,y).\n"
"If the reference is Absolute then the Jump will be at the position (x,y).\n"
"If the reference is Relative then the Jump will be at the (x,y) distance\n"
"from the current mouse location point."
msgstr ""
"Valoarea locației este un tuple (x, y).\n"
"Dacă referința este Absolută, Saltul va fi în poziția (x, y).\n"
"Dacă referința este Relativă, Saltul se va face la distanța (x, y)\n"
"din punctul de locație al mouse-ului curent."

#: AppGUI/GUIElements.py:2600
msgid "Save Log"
msgstr "Salvează Log"

#: AppGUI/GUIElements.py:2610 App_Main.py:2699 App_Main.py:3060
msgid "Close"
msgstr "Închide"

#: AppGUI/GUIElements.py:2619 AppTools/ToolShell.py:278
msgid "Type >help< to get started"
msgstr "Tastați >help< pentru a începe"

#: AppGUI/GUIElements.py:2990 AppGUI/GUIElements.py:2997
msgid "Idle."
msgstr "Inactiv."

#: AppGUI/GUIElements.py:3030
msgid "Application started ..."
msgstr "Aplicaţia a pornit ..."

#: AppGUI/GUIElements.py:3031
msgid "Hello!"
msgstr "Bună!"

#: AppGUI/GUIElements.py:3078 AppGUI/MainGUI.py:201 AppGUI/MainGUI.py:900
#: AppGUI/MainGUI.py:1862
msgid "Run Script ..."
msgstr "Rulează Script..."

#: AppGUI/GUIElements.py:3080 AppGUI/MainGUI.py:203
msgid ""
"Will run the opened Tcl Script thus\n"
"enabling the automation of certain\n"
"functions of FlatCAM."
msgstr ""
"Va rula un script TCL astfel oferind\n"
"o automatizare a anumitor functii\n"
"din FlatCAM."

#: AppGUI/GUIElements.py:3089 AppGUI/MainGUI.py:129
#: AppTools/ToolPcbWizard.py:62 AppTools/ToolPcbWizard.py:69
msgid "Open"
msgstr "Încarcă"

#: AppGUI/GUIElements.py:3093
msgid "Open Project ..."
msgstr "Încarcă Project ..."

#: AppGUI/GUIElements.py:3099 AppGUI/MainGUI.py:140
msgid "Open &Gerber ...\tCtrl+G"
msgstr "Încarcă &Gerber ...\tCtrl+G"

#: AppGUI/GUIElements.py:3104 AppGUI/MainGUI.py:145
msgid "Open &Excellon ...\tCtrl+E"
msgstr "Încarcă  &Excellon ...\tCtrl+E"

#: AppGUI/GUIElements.py:3109 AppGUI/MainGUI.py:150
msgid "Open G-&Code ..."
msgstr "Încarcă G-&Code ..."

#: AppGUI/GUIElements.py:3119
msgid "Exit"
msgstr "Iesiere"

#: AppGUI/MainGUI.py:78 AppGUI/MainGUI.py:80 AppGUI/MainGUI.py:1364
msgid "Toggle Panel"
msgstr "Comută Panel"

#: AppGUI/MainGUI.py:90
msgid "File"
msgstr "Fişiere"

#: AppGUI/MainGUI.py:95
msgid "&New Project ...\tCtrl+N"
msgstr "&Proiect Nou...\tCtrl+N"

#: AppGUI/MainGUI.py:97
msgid "Will create a new, blank project"
msgstr "Se va crea un proiect nou, fără continut"

#: AppGUI/MainGUI.py:102
msgid "&New"
msgstr "&Nou"

#: AppGUI/MainGUI.py:106
msgid "Geometry\tN"
msgstr "Geometrie\tN"

#: AppGUI/MainGUI.py:108
msgid "Will create a new, empty Geometry Object."
msgstr "Va crea un obiect nou de tip Geometrie, fără continut."

#: AppGUI/MainGUI.py:111
msgid "Gerber\tB"
msgstr "Gerber\tB"

#: AppGUI/MainGUI.py:113
msgid "Will create a new, empty Gerber Object."
msgstr "Va crea un obiect nou de tip Gerber, fără continut."

#: AppGUI/MainGUI.py:116
msgid "Excellon\tL"
msgstr "Excellon\tL"

#: AppGUI/MainGUI.py:118
msgid "Will create a new, empty Excellon Object."
msgstr "Va crea un obiect nou de tip Excellon, fără continut."

#: AppGUI/MainGUI.py:123
msgid "Document\tD"
msgstr "Document\tD"

#: AppGUI/MainGUI.py:125
msgid "Will create a new, empty Document Object."
msgstr "Va crea un obiect nou de tip Document, fără continut."

#: AppGUI/MainGUI.py:134
msgid "Open &Project ..."
msgstr "Încarcă &Project ..."

#: AppGUI/MainGUI.py:157
msgid "Open Config ..."
msgstr "Încarcă Config ..."

#: AppGUI/MainGUI.py:162
msgid "Recent projects"
msgstr "Proiectele recente"

#: AppGUI/MainGUI.py:164
msgid "Recent files"
msgstr "Fişierele Recente"

#: AppGUI/MainGUI.py:167 AppGUI/MainGUI.py:755 AppGUI/MainGUI.py:1337
msgid "Save"
msgstr "Salvează"

#: AppGUI/MainGUI.py:171
msgid "&Save Project ...\tCtrl+S"
msgstr "Salvează Proiect ...\tCtrl+S"

#: AppGUI/MainGUI.py:176
msgid "Save Project &As ...\tCtrl+Shift+S"
msgstr "Salvează Proiect ca ...\tCtrl+Shift+S"

#: AppGUI/MainGUI.py:191
msgid "Scripting"
msgstr "Scripting"

#: AppGUI/MainGUI.py:195 AppGUI/MainGUI.py:896 AppGUI/MainGUI.py:1858
msgid "New Script ..."
msgstr "Script nou ..."

#: AppGUI/MainGUI.py:197 AppGUI/MainGUI.py:898 AppGUI/MainGUI.py:1860
msgid "Open Script ..."
msgstr "Încarcă &Script..."

#: AppGUI/MainGUI.py:199
msgid "Open Example ..."
msgstr "Deschideți exemplul ..."

#: AppGUI/MainGUI.py:218
msgid "Import"
msgstr "Import"

#: AppGUI/MainGUI.py:220
msgid "&SVG as Geometry Object ..."
msgstr "&SVG ca și obiect Geometrie ..."

#: AppGUI/MainGUI.py:223
msgid "&SVG as Gerber Object ..."
msgstr "&SVG ca și obiect Gerber ..."

#: AppGUI/MainGUI.py:228
msgid "&DXF as Geometry Object ..."
msgstr "&DXF ca și obiect Geometrie ..."

#: AppGUI/MainGUI.py:231
msgid "&DXF as Gerber Object ..."
msgstr "&DXF ca și obiect Gerber ..."

#: AppGUI/MainGUI.py:235
msgid "HPGL2 as Geometry Object ..."
msgstr "HPGL2 ca obiect de geometrie ..."

#: AppGUI/MainGUI.py:241
msgid "Export"
msgstr "Export"

#: AppGUI/MainGUI.py:245
msgid "Export &SVG ..."
msgstr "Exporta &SVG ..."

#: AppGUI/MainGUI.py:249
msgid "Export DXF ..."
msgstr "Exporta DXF ..."

#: AppGUI/MainGUI.py:255
msgid "Export &PNG ..."
msgstr "Exporta &PNG ..."

#: AppGUI/MainGUI.py:257
msgid ""
"Will export an image in PNG format,\n"
"the saved image will contain the visual \n"
"information currently in FlatCAM Plot Area."
msgstr ""
"Va exporta o imagine in format PNG,\n"
"imagina salvata va contine elementele vizuale\n"
"afisate in zona de afișare."

#: AppGUI/MainGUI.py:266
msgid "Export &Excellon ..."
msgstr "Exporta Excellon ..."

#: AppGUI/MainGUI.py:268
msgid ""
"Will export an Excellon Object as Excellon file,\n"
"the coordinates format, the file units and zeros\n"
"are set in Preferences -> Excellon Export."
msgstr ""
"Va exporta un obiect Excellon intr-un fişier Excellon.\n"
"Formatul coordonatelor, unitatile de masura și tipul\n"
"de zerouri se vor seta in Preferințe -> Export Excellon."

#: AppGUI/MainGUI.py:275
msgid "Export &Gerber ..."
msgstr "Exporta &Gerber ..."

#: AppGUI/MainGUI.py:277
msgid ""
"Will export an Gerber Object as Gerber file,\n"
"the coordinates format, the file units and zeros\n"
"are set in Preferences -> Gerber Export."
msgstr ""
"Va exporta un obiect Gerber intr-un fişier Gerber.\n"
"Formatul coordonatelor, unitatile de măsură și tipul\n"
"de zerouri se vor seta in Preferințe -> Export Gerber."

#: AppGUI/MainGUI.py:287
msgid "Backup"
msgstr "Backup"

#: AppGUI/MainGUI.py:292
msgid "Import Preferences from file ..."
msgstr "Importați Preferințele din fișier ..."

#: AppGUI/MainGUI.py:298
msgid "Export Preferences to file ..."
msgstr "Exportați Preferințele într-un fișier ..."

#: AppGUI/MainGUI.py:306 AppGUI/preferences/PreferencesUIManager.py:1176
msgid "Save Preferences"
msgstr "Salvează Pref"

#: AppGUI/MainGUI.py:312 AppGUI/MainGUI.py:3989
msgid "Print (PDF)"
msgstr "Tipărire (PDF)"

#: AppGUI/MainGUI.py:320
msgid "E&xit"
msgstr "Iesire"

#: AppGUI/MainGUI.py:328 AppGUI/MainGUI.py:749 AppGUI/MainGUI.py:1487
msgid "Edit"
msgstr "Editează"

#: AppGUI/MainGUI.py:332
msgid "Edit Object\tE"
msgstr "Editare Obiect\tE"

#: AppGUI/MainGUI.py:334
msgid "Close Editor\tCtrl+S"
msgstr "Salvează Editor\tCtrl+S"

#: AppGUI/MainGUI.py:343
msgid "Conversion"
msgstr "Conversii"

#: AppGUI/MainGUI.py:345
msgid "&Join Geo/Gerber/Exc -> Geo"
msgstr "&Fuzionează Geo/Gerber/Exc -> Geo"

#: AppGUI/MainGUI.py:347
msgid ""
"Merge a selection of objects, which can be of type:\n"
"- Gerber\n"
"- Excellon\n"
"- Geometry\n"
"into a new combo Geometry object."
msgstr ""
"Fuzionează o selecţie de obiecte care pot fi de tipul:\n"
"- Gerber\n"
"- Excellon\n"
"- Geometrie\n"
"intr-un nou obiect tip Geometrie >combo<."

#: AppGUI/MainGUI.py:354
msgid "Join Excellon(s) -> Excellon"
msgstr "Fuzionează Excellon(s) -> Excellon"

#: AppGUI/MainGUI.py:356
msgid "Merge a selection of Excellon objects into a new combo Excellon object."
msgstr ""
"Fuzionează o selecţie de obiecte Excellon intr-un nou obiect Excellon "
">combo<."

#: AppGUI/MainGUI.py:359
msgid "Join Gerber(s) -> Gerber"
msgstr "Fuzionează Gerber(s) -> Gerber"

#: AppGUI/MainGUI.py:361
msgid "Merge a selection of Gerber objects into a new combo Gerber object."
msgstr ""
"Fuzionează o selecţie de obiecte Gerber intr-un nou obiect Gerber >combo<."

#: AppGUI/MainGUI.py:366
msgid "Convert Single to MultiGeo"
msgstr "Converteste SingleGeo in MultiGeo"

#: AppGUI/MainGUI.py:368
msgid ""
"Will convert a Geometry object from single_geometry type\n"
"to a multi_geometry type."
msgstr ""
"Va converti un obiect Geometrie din tipul simpla geometrie (SingleGeo)\n"
"la tipul geometrie complexa (MultiGeo)."

#: AppGUI/MainGUI.py:372
msgid "Convert Multi to SingleGeo"
msgstr "Converteste MultiGeo in SingleGeo"

#: AppGUI/MainGUI.py:374
msgid ""
"Will convert a Geometry object from multi_geometry type\n"
"to a single_geometry type."
msgstr ""
"Va converti un obiect Geometrie din tipul geometrie complexa (MultiGeo)\n"
"la tipul geometrie simpla (SingleGeo)."

#: AppGUI/MainGUI.py:381
msgid "Convert Any to Geo"
msgstr "Converteste Oricare to Geo"

#: AppGUI/MainGUI.py:384
msgid "Convert Any to Gerber"
msgstr "Converteste Oricare in Gerber"

#: AppGUI/MainGUI.py:390
msgid "&Copy\tCtrl+C"
msgstr "&Copiază\tCtrl+C"

#: AppGUI/MainGUI.py:395
msgid "&Delete\tDEL"
msgstr "&Șterge\tDEL"

#: AppGUI/MainGUI.py:400
msgid "Se&t Origin\tO"
msgstr "Se&tează Originea\tO"

#: AppGUI/MainGUI.py:402
msgid "Move to Origin\tShift+O"
msgstr "Deplasează la Origine\tShift+O"

#: AppGUI/MainGUI.py:405
msgid "Jump to Location\tJ"
msgstr "Sari la Locaţie\tJ"

#: AppGUI/MainGUI.py:407
msgid "Locate in Object\tShift+J"
msgstr "Localizează in Obiect\tShift+J"

#: AppGUI/MainGUI.py:412
msgid "Toggle Units\tQ"
msgstr "Comută Unitati\tQ"

#: AppGUI/MainGUI.py:414
msgid "&Select All\tCtrl+A"
msgstr "&Selectează Tot\tCtrl+A"

#: AppGUI/MainGUI.py:419
msgid "&Preferences\tShift+P"
msgstr "&Preferințe\tShift+P"

#: AppGUI/MainGUI.py:425 AppTools/ToolProperties.py:155
msgid "Options"
msgstr "Opțiuni"

#: AppGUI/MainGUI.py:427
msgid "&Rotate Selection\tShift+(R)"
msgstr "&Roteste Selectia\tShift+(R)"

#: AppGUI/MainGUI.py:432
msgid "&Skew on X axis\tShift+X"
msgstr "&Deformează pe axa X\tShift+X"

#: AppGUI/MainGUI.py:434
msgid "S&kew on Y axis\tShift+Y"
msgstr "Deformează pe axa Y\tShift+Y"

#: AppGUI/MainGUI.py:439
msgid "Flip on &X axis\tX"
msgstr "Oglindește pe axa &X\tX"

#: AppGUI/MainGUI.py:441
msgid "Flip on &Y axis\tY"
msgstr "Oglindește pe axa &Y\tY"

#: AppGUI/MainGUI.py:446
msgid "View source\tAlt+S"
msgstr "Vezi sursa\tAlt+S"

#: AppGUI/MainGUI.py:448
msgid "Tools DataBase\tCtrl+D"
msgstr "Baza de data Unelte\tCtrl+D"

#: AppGUI/MainGUI.py:455 AppGUI/MainGUI.py:1384
msgid "View"
msgstr "Vizualizare"

#: AppGUI/MainGUI.py:457
msgid "Enable all plots\tAlt+1"
msgstr "Activează toate afişările\tAlt+1"

#: AppGUI/MainGUI.py:459
msgid "Disable all plots\tAlt+2"
msgstr "Dezactivează toate afişările\tAlt+2"

#: AppGUI/MainGUI.py:461
msgid "Disable non-selected\tAlt+3"
msgstr "Dezactivează non-selectate\tAlt+3"

#: AppGUI/MainGUI.py:465
msgid "&Zoom Fit\tV"
msgstr "&Mărește și potrivește\tV"

#: AppGUI/MainGUI.py:467
msgid "&Zoom In\t="
msgstr "&Măreste\t="

#: AppGUI/MainGUI.py:469
msgid "&Zoom Out\t-"
msgstr "&Micșorează\t-"

#: AppGUI/MainGUI.py:474
msgid "Redraw All\tF5"
msgstr "Reafisare Toate\tF5"

#: AppGUI/MainGUI.py:478
msgid "Toggle Code Editor\tShift+E"
msgstr "Comută Editorul de cod\tShift+E"

#: AppGUI/MainGUI.py:481
msgid "&Toggle FullScreen\tAlt+F10"
msgstr "Comută FullScreen\tAlt+F10"

#: AppGUI/MainGUI.py:483
msgid "&Toggle Plot Area\tCtrl+F10"
msgstr "Comută Aria de Afișare\tCtrl+F10"

#: AppGUI/MainGUI.py:485
msgid "&Toggle Project/Sel/Tool\t`"
msgstr "Comută Proiect/Sel/Unealta\t`"

#: AppGUI/MainGUI.py:489
msgid "&Toggle Grid Snap\tG"
msgstr "Comută Grid\tG"

#: AppGUI/MainGUI.py:491
msgid "&Toggle Grid Lines\tAlt+G"
msgstr "Comută Linii Grid\tAlt+G"

#: AppGUI/MainGUI.py:493
msgid "&Toggle Axis\tShift+G"
msgstr "Comută Axe\tShift+G"

#: AppGUI/MainGUI.py:495
msgid "Toggle Workspace\tShift+W"
msgstr "Comută Suprafata de lucru\tShift+W"

#: AppGUI/MainGUI.py:497
#, fuzzy
#| msgid "Toggle Units"
msgid "Toggle HUD\tAlt+M"
msgstr "Comută Unitati"

#: AppGUI/MainGUI.py:502
msgid "Objects"
msgstr "Obiecte"

#: AppGUI/MainGUI.py:505 AppGUI/MainGUI.py:3987
#: AppObjects/ObjectCollection.py:1120 AppObjects/ObjectCollection.py:1167
msgid "Select All"
msgstr "Selectează toate"

#: AppGUI/MainGUI.py:507 AppObjects/ObjectCollection.py:1124
#: AppObjects/ObjectCollection.py:1171
msgid "Deselect All"
msgstr "Deselectează toate"

#: AppGUI/MainGUI.py:516
msgid "&Command Line\tS"
msgstr "&Linie de comanda\tS"

#: AppGUI/MainGUI.py:521
msgid "Help"
msgstr "Ajutor"

#: AppGUI/MainGUI.py:523
msgid "Online Help\tF1"
msgstr "Resurse online\tF1"

#: AppGUI/MainGUI.py:526 Bookmark.py:293
msgid "Bookmarks"
msgstr "Bookmarks"

#: AppGUI/MainGUI.py:529 App_Main.py:3031 App_Main.py:3040
msgid "Bookmarks Manager"
msgstr "Bookmarks Manager"

#: AppGUI/MainGUI.py:533
msgid "Report a bug"
msgstr "Raportati o eroare program"

#: AppGUI/MainGUI.py:536
msgid "Excellon Specification"
msgstr "Specificatii Excellon"

#: AppGUI/MainGUI.py:538
msgid "Gerber Specification"
msgstr "Specificatii Gerber"

#: AppGUI/MainGUI.py:543
msgid "Shortcuts List\tF3"
msgstr "Lista shortcut-uri\tF3"

#: AppGUI/MainGUI.py:545
msgid "YouTube Channel\tF4"
msgstr "YouTube \tF4"

#: AppGUI/MainGUI.py:547 App_Main.py:2666
msgid "About FlatCAM"
msgstr "Despre FlatCAM"

#: AppGUI/MainGUI.py:556
msgid "Add Circle\tO"
msgstr "Adaugă Cerc\tO"

#: AppGUI/MainGUI.py:559
msgid "Add Arc\tA"
msgstr "Adaugă Arc\tA"

#: AppGUI/MainGUI.py:562
msgid "Add Rectangle\tR"
msgstr "Adaugă Patrulater\tR"

#: AppGUI/MainGUI.py:565
msgid "Add Polygon\tN"
msgstr "Adaugă Poligon\tN"

#: AppGUI/MainGUI.py:568
msgid "Add Path\tP"
msgstr "Adaugă Cale\tP"

#: AppGUI/MainGUI.py:571
msgid "Add Text\tT"
msgstr "Adaugă Text\tT"

#: AppGUI/MainGUI.py:574
msgid "Polygon Union\tU"
msgstr "Uniune Poligoane\tU"

#: AppGUI/MainGUI.py:576
msgid "Polygon Intersection\tE"
msgstr "Intersecţie Poligoane\tE"

#: AppGUI/MainGUI.py:578
msgid "Polygon Subtraction\tS"
msgstr "Substracţie Poligoane\tS"

#: AppGUI/MainGUI.py:582
msgid "Cut Path\tX"
msgstr "Tăiere Cale\tX"

#: AppGUI/MainGUI.py:586
msgid "Copy Geom\tC"
msgstr "Copiază Geo\tC"

#: AppGUI/MainGUI.py:588
msgid "Delete Shape\tDEL"
msgstr "Șterge forma Geo.\tDEL"

#: AppGUI/MainGUI.py:592 AppGUI/MainGUI.py:679
msgid "Move\tM"
msgstr "Muta\tM"

#: AppGUI/MainGUI.py:594
msgid "Buffer Tool\tB"
msgstr "Unealta Bufer\tB"

#: AppGUI/MainGUI.py:597
msgid "Paint Tool\tI"
msgstr "Unealta Paint\tI"

#: AppGUI/MainGUI.py:600
msgid "Transform Tool\tAlt+R"
msgstr "Unealta Transformare\tAlt+R"

#: AppGUI/MainGUI.py:604
msgid "Toggle Corner Snap\tK"
msgstr "Comută lipire colt\tK"

#: AppGUI/MainGUI.py:610
msgid ">Excellon Editor<"
msgstr ">Editor Excellon<"

#: AppGUI/MainGUI.py:614
msgid "Add Drill Array\tA"
msgstr "Adaugă Arie Găuriri\tA"

#: AppGUI/MainGUI.py:616
msgid "Add Drill\tD"
msgstr "Adaugă Găurire\tD"

#: AppGUI/MainGUI.py:620
msgid "Add Slot Array\tQ"
msgstr "Adăugați Arie de Sloturi\tQ"

#: AppGUI/MainGUI.py:622
msgid "Add Slot\tW"
msgstr "Adăugați Slot\tW"

#: AppGUI/MainGUI.py:626
msgid "Resize Drill(S)\tR"
msgstr "Redimens. Găuriri\tR"

#: AppGUI/MainGUI.py:629 AppGUI/MainGUI.py:673
msgid "Copy\tC"
msgstr "Copiază\tC"

#: AppGUI/MainGUI.py:631 AppGUI/MainGUI.py:675
msgid "Delete\tDEL"
msgstr "Șterge\tDEL"

#: AppGUI/MainGUI.py:636
msgid "Move Drill(s)\tM"
msgstr "Muta Găuriri\tM"

#: AppGUI/MainGUI.py:641
msgid ">Gerber Editor<"
msgstr ">Editor Gerber<"

#: AppGUI/MainGUI.py:645
msgid "Add Pad\tP"
msgstr "Adaugă Pad\tP"

#: AppGUI/MainGUI.py:647
msgid "Add Pad Array\tA"
msgstr "Adaugă Arie paduri\tA"

#: AppGUI/MainGUI.py:649
msgid "Add Track\tT"
msgstr "Adaugă Traseu\tA"

#: AppGUI/MainGUI.py:651
msgid "Add Region\tN"
msgstr "Adaugă Regiune\tN"

#: AppGUI/MainGUI.py:655
msgid "Poligonize\tAlt+N"
msgstr "Poligonizare\tAlt+N"

#: AppGUI/MainGUI.py:657
msgid "Add SemiDisc\tE"
msgstr "Adaugă SemiDisc\tE"

#: AppGUI/MainGUI.py:659
msgid "Add Disc\tD"
msgstr "Adaugă Disc\tD"

#: AppGUI/MainGUI.py:661
msgid "Buffer\tB"
msgstr "Bufer\tB"

#: AppGUI/MainGUI.py:663
msgid "Scale\tS"
msgstr "Scalare\tS"

#: AppGUI/MainGUI.py:665
msgid "Mark Area\tAlt+A"
msgstr "Marchează aria\tAlt+A"

#: AppGUI/MainGUI.py:667
msgid "Eraser\tCtrl+E"
msgstr "Radieră\tCtrl+E"

#: AppGUI/MainGUI.py:669
msgid "Transform\tAlt+R"
msgstr "Unealta Transformare\tAlt+R"

#: AppGUI/MainGUI.py:696
msgid "Enable Plot"
msgstr "Activează Afișare"

#: AppGUI/MainGUI.py:698
msgid "Disable Plot"
msgstr "Dezactivează Afișare"

#: AppGUI/MainGUI.py:702
msgid "Set Color"
msgstr "Setați culoarea"

#: AppGUI/MainGUI.py:705 App_Main.py:9798
msgid "Red"
msgstr "Roșu"

#: AppGUI/MainGUI.py:708 App_Main.py:9800
msgid "Blue"
msgstr "Albastru"

#: AppGUI/MainGUI.py:711 App_Main.py:9803
msgid "Yellow"
msgstr "Galben"

#: AppGUI/MainGUI.py:714 App_Main.py:9805
msgid "Green"
msgstr "Verde"

#: AppGUI/MainGUI.py:717 App_Main.py:9807
msgid "Purple"
msgstr "Violet"

#: AppGUI/MainGUI.py:720 App_Main.py:9809
msgid "Brown"
msgstr "Maro"

#: AppGUI/MainGUI.py:723 App_Main.py:9811 App_Main.py:9867
msgid "White"
msgstr "Alb"

#: AppGUI/MainGUI.py:726 App_Main.py:9813
msgid "Black"
msgstr "Negru"

#: AppGUI/MainGUI.py:731 App_Main.py:9816
msgid "Custom"
msgstr "Personalizat"

#: AppGUI/MainGUI.py:736 App_Main.py:9850
msgid "Opacity"
msgstr "Opacitate"

#: AppGUI/MainGUI.py:739 App_Main.py:9826
msgid "Default"
msgstr "Implicit"

#: AppGUI/MainGUI.py:744
msgid "Generate CNC"
msgstr "Generează CNC"

#: AppGUI/MainGUI.py:746
msgid "View Source"
msgstr "Vizualiz. Sursa"

#: AppGUI/MainGUI.py:751 AppGUI/MainGUI.py:856 AppGUI/MainGUI.py:1067
#: AppGUI/MainGUI.py:1483 AppGUI/MainGUI.py:1821 AppGUI/MainGUI.py:2028
#: AppGUI/MainGUI.py:4397 AppGUI/ObjectUI.py:1719
#: AppObjects/FlatCAMGeometry.py:553 AppTools/ToolPanelize.py:551
#: AppTools/ToolPanelize.py:578 AppTools/ToolPanelize.py:671
#: AppTools/ToolPanelize.py:700 AppTools/ToolPanelize.py:762
msgid "Copy"
msgstr "Copiază"

#: AppGUI/MainGUI.py:759 AppGUI/MainGUI.py:1496 AppTools/ToolProperties.py:31
msgid "Properties"
msgstr "Proprietati"

#: AppGUI/MainGUI.py:788
msgid "File Toolbar"
msgstr "Toolbar Fişiere"

#: AppGUI/MainGUI.py:792
msgid "Edit Toolbar"
msgstr "Toolbar Editare"

#: AppGUI/MainGUI.py:796
msgid "View Toolbar"
msgstr "Toolbar Vizualizare"

#: AppGUI/MainGUI.py:800
msgid "Shell Toolbar"
msgstr "Toolbar Linie de comanda"

#: AppGUI/MainGUI.py:804
msgid "Tools Toolbar"
msgstr "Toolbar Unelte"

#: AppGUI/MainGUI.py:808
msgid "Excellon Editor Toolbar"
msgstr "Toolbar Editor Excellon"

#: AppGUI/MainGUI.py:814
msgid "Geometry Editor Toolbar"
msgstr "Toolbar Editor Geometrii"

#: AppGUI/MainGUI.py:818
msgid "Gerber Editor Toolbar"
msgstr "Toolbar Editor Gerber"

#: AppGUI/MainGUI.py:822
msgid "Grid Toolbar"
msgstr "Toolbar Grid-uri"

#: AppGUI/MainGUI.py:836 AppGUI/MainGUI.py:1800 App_Main.py:6763
#: App_Main.py:6767
msgid "Open Gerber"
msgstr "Încarcă Gerber"

#: AppGUI/MainGUI.py:838 AppGUI/MainGUI.py:1802 App_Main.py:6801
#: App_Main.py:6805
msgid "Open Excellon"
msgstr "Încarcă Excellon"

#: AppGUI/MainGUI.py:841 AppGUI/MainGUI.py:1805
msgid "Open project"
msgstr "Încarcă Proiect"

#: AppGUI/MainGUI.py:843 AppGUI/MainGUI.py:1807
msgid "Save project"
msgstr "Salvează Proiect"

#: AppGUI/MainGUI.py:851 AppGUI/MainGUI.py:1816
msgid "Save Object and close the Editor"
msgstr "Salvează Obiectul și inchide Editorul"

#: AppGUI/MainGUI.py:858 AppGUI/MainGUI.py:1823
msgid "&Delete"
msgstr "&Șterge"

#: AppGUI/MainGUI.py:861 AppGUI/MainGUI.py:1826 AppGUI/MainGUI.py:3988
#: AppGUI/MainGUI.py:4194 AppTools/ToolDistance.py:35
#: AppTools/ToolDistance.py:197
msgid "Distance Tool"
msgstr "Unealta Distanță"

#: AppGUI/MainGUI.py:863 AppGUI/MainGUI.py:1828
msgid "Distance Min Tool"
msgstr "Unealta Distanță min"

#: AppGUI/MainGUI.py:865 AppGUI/MainGUI.py:1830 AppGUI/MainGUI.py:3981
msgid "Set Origin"
msgstr "Setează Originea"

#: AppGUI/MainGUI.py:867 AppGUI/MainGUI.py:1832
msgid "Move to Origin"
msgstr "Deplasează-te la Origine"

#: AppGUI/MainGUI.py:870 AppGUI/MainGUI.py:1834
msgid "Jump to Location"
msgstr "Sari la Locaţie"

#: AppGUI/MainGUI.py:872 AppGUI/MainGUI.py:1836 AppGUI/MainGUI.py:3993
msgid "Locate in Object"
msgstr "Localizează in Obiect"

#: AppGUI/MainGUI.py:878 AppGUI/MainGUI.py:1842
msgid "&Replot"
msgstr "&Reafișare"

#: AppGUI/MainGUI.py:880 AppGUI/MainGUI.py:1844
msgid "&Clear plot"
msgstr "&Șterge Afișare"

#: AppGUI/MainGUI.py:882 AppGUI/MainGUI.py:1846 AppGUI/MainGUI.py:3984
msgid "Zoom In"
msgstr "Marire"

#: AppGUI/MainGUI.py:884 AppGUI/MainGUI.py:1848 AppGUI/MainGUI.py:3984
msgid "Zoom Out"
msgstr "Micsorare"

#: AppGUI/MainGUI.py:886 AppGUI/MainGUI.py:1386 AppGUI/MainGUI.py:1850
#: AppGUI/MainGUI.py:3983
msgid "Zoom Fit"
msgstr "Marire și ajustare"

#: AppGUI/MainGUI.py:894 AppGUI/MainGUI.py:1856
msgid "&Command Line"
msgstr "&Linie de comanda"

#: AppGUI/MainGUI.py:906 AppGUI/MainGUI.py:1868
msgid "2Sided Tool"
msgstr "Unealta 2-fețe"

#: AppGUI/MainGUI.py:908 AppGUI/MainGUI.py:1870 AppGUI/MainGUI.py:3999
msgid "Align Objects Tool"
msgstr "Unealta de Aliniere"

#: AppGUI/MainGUI.py:910 AppGUI/MainGUI.py:1872 AppGUI/MainGUI.py:4000
#: AppTools/ToolExtractDrills.py:393
msgid "Extract Drills Tool"
msgstr "Unealta de Extragere Găuri"

#: AppGUI/MainGUI.py:913 AppGUI/ObjectUI.py:596 AppTools/ToolCutOut.py:440
msgid "Cutout Tool"
msgstr "Unealta Decupare"

#: AppGUI/MainGUI.py:915 AppGUI/MainGUI.py:1877 AppGUI/ObjectUI.py:574
#: AppGUI/ObjectUI.py:2287 AppTools/ToolNCC.py:974
msgid "NCC Tool"
msgstr "Unealta NCC"

#: AppGUI/MainGUI.py:921 AppGUI/MainGUI.py:1883
msgid "Panel Tool"
msgstr "Unealta Panel"

#: AppGUI/MainGUI.py:923 AppGUI/MainGUI.py:1885 AppTools/ToolFilm.py:569
msgid "Film Tool"
msgstr "Unealta Film"

#: AppGUI/MainGUI.py:925 AppGUI/MainGUI.py:1887 AppTools/ToolSolderPaste.py:553
msgid "SolderPaste Tool"
msgstr "Unealta Dispenser SP"

#: AppGUI/MainGUI.py:927 AppGUI/MainGUI.py:1889 AppTools/ToolSub.py:35
msgid "Subtract Tool"
msgstr "Unealta Scădere"

#: AppGUI/MainGUI.py:929 AppGUI/MainGUI.py:1891 AppTools/ToolRulesCheck.py:616
msgid "Rules Tool"
msgstr "Unalta Verif. Reguli"

#: AppGUI/MainGUI.py:931 AppGUI/MainGUI.py:1893 AppGUI/MainGUI.py:4002
#: AppTools/ToolOptimal.py:33 AppTools/ToolOptimal.py:307
msgid "Optimal Tool"
msgstr "Unealta Optim"

#: AppGUI/MainGUI.py:936 AppGUI/MainGUI.py:1898 AppGUI/MainGUI.py:3999
msgid "Calculators Tool"
msgstr "Unealta Calculatoare"

#: AppGUI/MainGUI.py:940 AppGUI/MainGUI.py:1902 AppGUI/MainGUI.py:4003
#: AppTools/ToolQRCode.py:43 AppTools/ToolQRCode.py:382
msgid "QRCode Tool"
msgstr "Unealta QRCode"

#: AppGUI/MainGUI.py:942 AppGUI/MainGUI.py:1904
#: AppTools/ToolCopperThieving.py:39 AppTools/ToolCopperThieving.py:568
msgid "Copper Thieving Tool"
msgstr "Unealta Copper Thieving"

#: AppGUI/MainGUI.py:945 AppGUI/MainGUI.py:1907 AppGUI/MainGUI.py:4000
#: AppTools/ToolFiducials.py:33 AppTools/ToolFiducials.py:396
msgid "Fiducials Tool"
msgstr "Unealta Fiducials"

#: AppGUI/MainGUI.py:947 AppGUI/MainGUI.py:1909 AppTools/ToolCalibration.py:37
#: AppTools/ToolCalibration.py:759
msgid "Calibration Tool"
msgstr "Unealta Calibrare"

#: AppGUI/MainGUI.py:949 AppGUI/MainGUI.py:1911 AppGUI/MainGUI.py:4000
msgid "Punch Gerber Tool"
msgstr "Unealta Punctare Gerber"

#: AppGUI/MainGUI.py:951 AppGUI/MainGUI.py:1913 AppTools/ToolInvertGerber.py:31
msgid "Invert Gerber Tool"
msgstr "Unealta Inversare Gerber"

#: AppGUI/MainGUI.py:953 AppGUI/MainGUI.py:1915 AppGUI/MainGUI.py:4002
#: AppTools/ToolCorners.py:31
#, fuzzy
#| msgid "Invert Gerber Tool"
msgid "Corner Markers Tool"
msgstr "Unealta Inversare Gerber"

#: AppGUI/MainGUI.py:959 AppGUI/MainGUI.py:985 AppGUI/MainGUI.py:1037
#: AppGUI/MainGUI.py:1921 AppGUI/MainGUI.py:1999
msgid "Select"
msgstr "Selectează"

#: AppGUI/MainGUI.py:961 AppGUI/MainGUI.py:1923
msgid "Add Drill Hole"
msgstr "Adaugă o Găurire"

#: AppGUI/MainGUI.py:963 AppGUI/MainGUI.py:1925
msgid "Add Drill Hole Array"
msgstr "Adaugă o arie de Găuriri"

#: AppGUI/MainGUI.py:965 AppGUI/MainGUI.py:1474 AppGUI/MainGUI.py:1929
#: AppGUI/MainGUI.py:4279
msgid "Add Slot"
msgstr "Adaugă Slot"

#: AppGUI/MainGUI.py:967 AppGUI/MainGUI.py:1476 AppGUI/MainGUI.py:1931
#: AppGUI/MainGUI.py:4278
msgid "Add Slot Array"
msgstr "Adaugă o Arie sloturi"

#: AppGUI/MainGUI.py:969 AppGUI/MainGUI.py:1479 AppGUI/MainGUI.py:1927
msgid "Resize Drill"
msgstr "Redimens. Găurire"

#: AppGUI/MainGUI.py:973 AppGUI/MainGUI.py:1935
msgid "Copy Drill"
msgstr "Copiază Găurire"

#: AppGUI/MainGUI.py:975 AppGUI/MainGUI.py:1937
msgid "Delete Drill"
msgstr "Șterge Găurire"

#: AppGUI/MainGUI.py:979 AppGUI/MainGUI.py:1941
msgid "Move Drill"
msgstr "Muta Găurire"

#: AppGUI/MainGUI.py:987 AppGUI/MainGUI.py:1949
msgid "Add Circle"
msgstr "Adaugă Cerc"

#: AppGUI/MainGUI.py:989 AppGUI/MainGUI.py:1951
msgid "Add Arc"
msgstr "Adaugă Arc"

#: AppGUI/MainGUI.py:991 AppGUI/MainGUI.py:1953
msgid "Add Rectangle"
msgstr "Adaugă Patrulater"

#: AppGUI/MainGUI.py:995 AppGUI/MainGUI.py:1957
msgid "Add Path"
msgstr "Adaugă Cale"

#: AppGUI/MainGUI.py:997 AppGUI/MainGUI.py:1959
msgid "Add Polygon"
msgstr "Adaugă Poligon"

#: AppGUI/MainGUI.py:1000 AppGUI/MainGUI.py:1962
msgid "Add Text"
msgstr "Adaugă Text"

#: AppGUI/MainGUI.py:1002 AppGUI/MainGUI.py:1964
msgid "Add Buffer"
msgstr "Adaugă Bufer"

#: AppGUI/MainGUI.py:1004 AppGUI/MainGUI.py:1966
msgid "Paint Shape"
msgstr "Paint o forma"

#: AppGUI/MainGUI.py:1006 AppGUI/MainGUI.py:1063 AppGUI/MainGUI.py:1415
#: AppGUI/MainGUI.py:1460 AppGUI/MainGUI.py:1968 AppGUI/MainGUI.py:2024
msgid "Eraser"
msgstr "Stergere Selectivă"

#: AppGUI/MainGUI.py:1010 AppGUI/MainGUI.py:1972
msgid "Polygon Union"
msgstr "Uniune Poligoane"

#: AppGUI/MainGUI.py:1012 AppGUI/MainGUI.py:1974
msgid "Polygon Explode"
msgstr "Explodare Poligoane"

#: AppGUI/MainGUI.py:1015 AppGUI/MainGUI.py:1977
msgid "Polygon Intersection"
msgstr "Intersecţie Poligoane"

#: AppGUI/MainGUI.py:1017 AppGUI/MainGUI.py:1979
msgid "Polygon Subtraction"
msgstr "Substracţie Poligoane"

#: AppGUI/MainGUI.py:1021 AppGUI/MainGUI.py:1983
msgid "Cut Path"
msgstr "Taie Cale"

#: AppGUI/MainGUI.py:1023
msgid "Copy Shape(s)"
msgstr "Copiază forme geo."

#: AppGUI/MainGUI.py:1026
msgid "Delete Shape '-'"
msgstr "Șterge forme geo"

#: AppGUI/MainGUI.py:1028 AppGUI/MainGUI.py:1071 AppGUI/MainGUI.py:1427
#: AppGUI/MainGUI.py:1464 AppGUI/MainGUI.py:1989 AppGUI/MainGUI.py:2032
#: AppGUI/ObjectUI.py:109
msgid "Transformations"
msgstr "Transformări"

#: AppGUI/MainGUI.py:1031
msgid "Move Objects "
msgstr "Mută Obiecte "

#: AppGUI/MainGUI.py:1039 AppGUI/MainGUI.py:2001 AppGUI/MainGUI.py:4398
msgid "Add Pad"
msgstr "Adaugă Pad"

#: AppGUI/MainGUI.py:1043 AppGUI/MainGUI.py:2005 AppGUI/MainGUI.py:4399
msgid "Add Track"
msgstr "Adaugă Traseu"

#: AppGUI/MainGUI.py:1045 AppGUI/MainGUI.py:2007 AppGUI/MainGUI.py:4398
msgid "Add Region"
msgstr "Adaugă Regiune"

#: AppGUI/MainGUI.py:1047 AppGUI/MainGUI.py:1446 AppGUI/MainGUI.py:2009
msgid "Poligonize"
msgstr "Poligonizare"

#: AppGUI/MainGUI.py:1050 AppGUI/MainGUI.py:1448 AppGUI/MainGUI.py:2012
msgid "SemiDisc"
msgstr "SemiDisc"

#: AppGUI/MainGUI.py:1052 AppGUI/MainGUI.py:1450 AppGUI/MainGUI.py:2014
msgid "Disc"
msgstr "Disc"

#: AppGUI/MainGUI.py:1060 AppGUI/MainGUI.py:1458 AppGUI/MainGUI.py:2022
msgid "Mark Area"
msgstr "Marc. aria"

#: AppGUI/MainGUI.py:1074 AppGUI/MainGUI.py:1431 AppGUI/MainGUI.py:1494
#: AppGUI/MainGUI.py:2035 AppGUI/MainGUI.py:4398 AppTools/ToolMove.py:27
msgid "Move"
msgstr "Mutare"

#: AppGUI/MainGUI.py:1082
msgid "Snap to grid"
msgstr "Lipire la grid"

#: AppGUI/MainGUI.py:1085
msgid "Grid X snapping distance"
msgstr "Distanta de lipire la grid pe axa X"

#: AppGUI/MainGUI.py:1090
msgid "Grid Y snapping distance"
msgstr "Distanta de lipire la grid pe axa Y"

#: AppGUI/MainGUI.py:1096
msgid ""
"When active, value on Grid_X\n"
"is copied to the Grid_Y value."
msgstr ""
"Când este activ, valoarea de pe Grid_X\n"
"este copiata și in Grid_Y."

#: AppGUI/MainGUI.py:1103
msgid "Snap to corner"
msgstr "Lipire la colt"

#: AppGUI/MainGUI.py:1107 AppGUI/preferences/general/GeneralAPPSetGroupUI.py:78
msgid "Max. magnet distance"
msgstr "Distanta magnetica maxima"

#: AppGUI/MainGUI.py:1132 AppGUI/MainGUI.py:1377 App_Main.py:7793
msgid "Project"
msgstr "Proiect"

#: AppGUI/MainGUI.py:1147
msgid "Selected"
msgstr "Selectat"

#: AppGUI/MainGUI.py:1175 AppGUI/MainGUI.py:1183
msgid "Plot Area"
msgstr "Arie Afișare"

#: AppGUI/MainGUI.py:1210
msgid "General"
msgstr "General"

#: AppGUI/MainGUI.py:1225 AppTools/ToolCopperThieving.py:74
#: AppTools/ToolDblSided.py:64 AppTools/ToolExtractDrills.py:61
#: AppTools/ToolInvertGerber.py:72 AppTools/ToolOptimal.py:71
#: AppTools/ToolPunchGerber.py:64
msgid "GERBER"
msgstr "GERBER"

#: AppGUI/MainGUI.py:1235 AppTools/ToolDblSided.py:92
msgid "EXCELLON"
msgstr "EXCELLON"

#: AppGUI/MainGUI.py:1245 AppTools/ToolDblSided.py:120
msgid "GEOMETRY"
msgstr "GEOMETRIE"

#: AppGUI/MainGUI.py:1255
msgid "CNC-JOB"
msgstr "CNCJob"

#: AppGUI/MainGUI.py:1264 AppGUI/ObjectUI.py:563 AppGUI/ObjectUI.py:2262
msgid "TOOLS"
msgstr "Unelte"

#: AppGUI/MainGUI.py:1273
msgid "TOOLS 2"
msgstr "UNELTE 2"

#: AppGUI/MainGUI.py:1283
msgid "UTILITIES"
msgstr "UTILITARE"

#: AppGUI/MainGUI.py:1300
#: AppGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:192
msgid "Restore Defaults"
msgstr "Restabiliți setările de bază"

#: AppGUI/MainGUI.py:1303
msgid ""
"Restore the entire set of default values\n"
"to the initial values loaded after first launch."
msgstr ""
"Restaurați întregul set de valori implicite\n"
"la valorile inițiale încărcate după prima lansare."

#: AppGUI/MainGUI.py:1308
msgid "Open Pref Folder"
msgstr "Deschide Pref Dir"

#: AppGUI/MainGUI.py:1311
msgid "Open the folder where FlatCAM save the preferences files."
msgstr "Deschide directorul unde FlatCAM salvează fişierele cu setări."

#: AppGUI/MainGUI.py:1315 AppGUI/MainGUI.py:1773
msgid "Clear GUI Settings"
msgstr "Șterge Setările GUI"

#: AppGUI/MainGUI.py:1319
msgid ""
"Clear the GUI settings for FlatCAM,\n"
"such as: layout, gui state, style, hdpi support etc."
msgstr ""
"Șterge setările GUI pentru FlatCAM,\n"
"cum ar fi: amplasare, stare UI, suport HDPI sau traducerea."

#: AppGUI/MainGUI.py:1330
msgid "Apply"
msgstr "Aplicați"

#: AppGUI/MainGUI.py:1333
msgid "Apply the current preferences without saving to a file."
msgstr "Aplicați preferințele actuale fără a salva într-un fișier."

#: AppGUI/MainGUI.py:1340
msgid ""
"Save the current settings in the 'current_defaults' file\n"
"which is the file storing the working default preferences."
msgstr ""
"Salvează setările curente in fişierul numit: 'current_defaults'\n"
"fişier care este cel unde se salvează preferințele cu care se va lucra."

#: AppGUI/MainGUI.py:1348
msgid "Will not save the changes and will close the preferences window."
msgstr "Nu va salva modificările și va închide fereastra de preferințe."

#: AppGUI/MainGUI.py:1362
msgid "Toggle Visibility"
msgstr "Comută Vizibilitate"

#: AppGUI/MainGUI.py:1368
msgid "New"
msgstr "Nou"

#: AppGUI/MainGUI.py:1370 AppGUI/ObjectUI.py:450
#: AppObjects/FlatCAMGerber.py:239 AppObjects/FlatCAMGerber.py:327
#: AppTools/ToolCalibration.py:631 AppTools/ToolCalibration.py:648
#: AppTools/ToolCalibration.py:815 AppTools/ToolCopperThieving.py:144
#: AppTools/ToolCopperThieving.py:158 AppTools/ToolCopperThieving.py:604
#: AppTools/ToolCutOut.py:92 AppTools/ToolDblSided.py:226
#: AppTools/ToolFilm.py:69 AppTools/ToolFilm.py:92 AppTools/ToolImage.py:49
#: AppTools/ToolImage.py:271 AppTools/ToolNCC.py:95 AppTools/ToolNCC.py:558
#: AppTools/ToolNCC.py:1300 AppTools/ToolPaint.py:501 AppTools/ToolPaint.py:705
#: AppTools/ToolPanelize.py:116 AppTools/ToolPanelize.py:385
#: AppTools/ToolPanelize.py:402
msgid "Geometry"
msgstr "Geometrie"

#: AppGUI/MainGUI.py:1374
#: AppGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:99
#: AppTools/ToolAlignObjects.py:74 AppTools/ToolAlignObjects.py:110
#: AppTools/ToolCalibration.py:197 AppTools/ToolCalibration.py:631
#: AppTools/ToolCalibration.py:648 AppTools/ToolCalibration.py:807
#: AppTools/ToolCalibration.py:815 AppTools/ToolCopperThieving.py:144
#: AppTools/ToolCopperThieving.py:158 AppTools/ToolCopperThieving.py:604
#: AppTools/ToolDblSided.py:225 AppTools/ToolFilm.py:342
#: AppTools/ToolNCC.py:558 AppTools/ToolNCC.py:1300 AppTools/ToolPaint.py:501
#: AppTools/ToolPaint.py:705 AppTools/ToolPanelize.py:385
#: AppTools/ToolPunchGerber.py:149 AppTools/ToolPunchGerber.py:164
msgid "Excellon"
msgstr "Excellon"

#: AppGUI/MainGUI.py:1381
msgid "Grids"
msgstr "Grid-uri"

#: AppGUI/MainGUI.py:1388
msgid "Clear Plot"
msgstr "Șterge Afișare"

#: AppGUI/MainGUI.py:1390
msgid "Replot"
msgstr "Reafișare"

#: AppGUI/MainGUI.py:1394
msgid "Geo Editor"
msgstr "Editor Geometrii"

#: AppGUI/MainGUI.py:1396
msgid "Path"
msgstr "Pe cale"

#: AppGUI/MainGUI.py:1398
msgid "Rectangle"
msgstr "Patrulater"

#: AppGUI/MainGUI.py:1401
msgid "Circle"
msgstr "Cerc"

#: AppGUI/MainGUI.py:1405
msgid "Arc"
msgstr "Arc"

#: AppGUI/MainGUI.py:1419
msgid "Union"
msgstr "Uniune"

#: AppGUI/MainGUI.py:1421
msgid "Intersection"
msgstr "Intersecţie"

#: AppGUI/MainGUI.py:1423
msgid "Subtraction"
msgstr "Scădere"

#: AppGUI/MainGUI.py:1425 AppGUI/ObjectUI.py:2351
#: AppGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:56
msgid "Cut"
msgstr "Tăiere"

#: AppGUI/MainGUI.py:1436
msgid "Pad"
msgstr "Pad"

#: AppGUI/MainGUI.py:1438
msgid "Pad Array"
msgstr "Arie de paduri"

#: AppGUI/MainGUI.py:1442
msgid "Track"
msgstr "Traseu"

#: AppGUI/MainGUI.py:1444
msgid "Region"
msgstr "Regiune"

#: AppGUI/MainGUI.py:1467
msgid "Exc Editor"
msgstr "Editor EXC"

#: AppGUI/MainGUI.py:1469 AppGUI/MainGUI.py:4277
msgid "Add Drill"
msgstr "Adaugă găurire"

#: AppGUI/MainGUI.py:1489 App_Main.py:2220
msgid "Close Editor"
msgstr "Inchide Editorul"

#: AppGUI/MainGUI.py:1514
msgid ""
"Absolute measurement.\n"
"Reference is (X=0, Y= 0) position"
msgstr ""
"Măsurătoare absolută.\n"
"Referința este originea (0, 0)"

#: AppGUI/MainGUI.py:1615
msgid "Lock Toolbars"
msgstr "Blochează Toolbar-uri"

#: AppGUI/MainGUI.py:1761
msgid "FlatCAM Preferences Folder opened."
msgstr "Folderul de preferințe FlatCAM a fost deschis."

#: AppGUI/MainGUI.py:1772
msgid "Are you sure you want to delete the GUI Settings? \n"
msgstr "Esti sigur că dorești să ștergi setările GUI?\n"

#: AppGUI/MainGUI.py:1775 AppGUI/preferences/PreferencesUIManager.py:941
#: AppGUI/preferences/PreferencesUIManager.py:1179 AppTranslation.py:109
#: AppTranslation.py:206 App_Main.py:2223 App_Main.py:3094 App_Main.py:5526
#: App_Main.py:6586
msgid "Yes"
msgstr "Da"

#: AppGUI/MainGUI.py:1776 AppGUI/preferences/PreferencesUIManager.py:1180
#: AppGUI/preferences/tools/ToolsNCCPrefGroupUI.py:164
#: AppGUI/preferences/tools/ToolsPaintPrefGroupUI.py:150
#: AppTools/ToolNCC.py:182 AppTools/ToolPaint.py:165 AppTranslation.py:110
#: AppTranslation.py:207 App_Main.py:2224 App_Main.py:3095 App_Main.py:5527
#: App_Main.py:6587
msgid "No"
msgstr "Nu"

#: AppGUI/MainGUI.py:1875
msgid "&Cutout Tool"
msgstr "Unealta Decupare"

#: AppGUI/MainGUI.py:1947
msgid "Select 'Esc'"
msgstr "Select"

#: AppGUI/MainGUI.py:1985
msgid "Copy Objects"
msgstr "Copiază Obiecte"

#: AppGUI/MainGUI.py:1987 AppGUI/MainGUI.py:4197
msgid "Delete Shape"
msgstr "Șterge forme geo"

#: AppGUI/MainGUI.py:1993
msgid "Move Objects"
msgstr "Mută Obiecte"

#: AppGUI/MainGUI.py:2577
msgid ""
"Please first select a geometry item to be cutted\n"
"then select the geometry item that will be cutted\n"
"out of the first item. In the end press ~X~ key or\n"
"the toolbar button."
msgstr ""
"Mai intai selectează o forma geometrică care trebuie tăiată\n"
"apoi selectează forma geo. tăietoare. La final apasă tasta ~X~ sau\n"
"butonul corespunzator din Toolbar."

#: AppGUI/MainGUI.py:2584 AppGUI/MainGUI.py:2746 AppGUI/MainGUI.py:2791
#: AppGUI/MainGUI.py:2811
msgid "Warning"
msgstr "Atenţie"

#: AppGUI/MainGUI.py:2741
msgid ""
"Please select geometry items \n"
"on which to perform Intersection Tool."
msgstr ""
"Selectează forma geometrică asupra căreia să se\n"
"aplice Unealta Intersecţie."

#: AppGUI/MainGUI.py:2786
msgid ""
"Please select geometry items \n"
"on which to perform Substraction Tool."
msgstr ""
"Selectează forma geometrică asupra căreia să se\n"
"aplice Unealta Substracţie."

#: AppGUI/MainGUI.py:2806
msgid ""
"Please select geometry items \n"
"on which to perform union."
msgstr ""
"Selectează forma geometrică asupra căreia să se\n"
"aplice Unealta Uniune."

#: AppGUI/MainGUI.py:2889 AppGUI/MainGUI.py:3104
msgid "Cancelled. Nothing selected to delete."
msgstr "Anulat. Nimic nu este selectat pentru ștergere."

#: AppGUI/MainGUI.py:2973 AppGUI/MainGUI.py:3220
msgid "Cancelled. Nothing selected to copy."
msgstr "Anulat. Nimic nu este selectat pentru copiere."

#: AppGUI/MainGUI.py:3019 AppGUI/MainGUI.py:3249
msgid "Cancelled. Nothing selected to move."
msgstr "Anulat. Nimic nu este selectat pentru mutare."

#: AppGUI/MainGUI.py:3275
msgid "New Tool ..."
msgstr "O noua Unealtă ..."

#: AppGUI/MainGUI.py:3276 AppTools/ToolNCC.py:924 AppTools/ToolPaint.py:849
#: AppTools/ToolSolderPaste.py:560
msgid "Enter a Tool Diameter"
msgstr "Introduceti un Diametru de Unealtă"

#: AppGUI/MainGUI.py:3288
msgid "Adding Tool cancelled ..."
msgstr "Adăugarea unei unelte anulată..."

#: AppGUI/MainGUI.py:3302
msgid "Distance Tool exit..."
msgstr "Măsurătoarea s-a terminat ..."

#: AppGUI/MainGUI.py:3481 App_Main.py:3084
msgid "Application is saving the project. Please wait ..."
msgstr "Aplicația salvează proiectul. Vă rugăm aşteptați ..."

#: AppGUI/MainGUI.py:3616 App_Main.py:9309
msgid "<b>Shortcut Key List</b>"
msgstr "<b>Lista cu taste Shortcut</b>"

#: AppGUI/MainGUI.py:3977
#, fuzzy
#| msgid "Key Shortcut List"
msgid "General Shortcut list"
msgstr "Lista de shortcut-uri"

#: AppGUI/MainGUI.py:3978
msgid "SHOW SHORTCUT LIST"
msgstr "ARATA LISTA DE TASTE SHORTCUT"

#: AppGUI/MainGUI.py:3978
msgid "Switch to Project Tab"
msgstr "Treci la Tab-ul Proiect"

#: AppGUI/MainGUI.py:3978
msgid "Switch to Selected Tab"
msgstr "Treci la Tab-ul Selectat"

#: AppGUI/MainGUI.py:3979
msgid "Switch to Tool Tab"
msgstr "Treci la Tab-ul 'Unealta'"

#: AppGUI/MainGUI.py:3980
msgid "New Gerber"
msgstr "Gerber Nou"

#: AppGUI/MainGUI.py:3980
msgid "Edit Object (if selected)"
msgstr "Editeaza obiectul (daca este selectat)"

#: AppGUI/MainGUI.py:3980 App_Main.py:5831
msgid "Grid On/Off"
msgstr "Grid On/Off"

#: AppGUI/MainGUI.py:3980
msgid "Jump to Coordinates"
msgstr "Sari la Coordonatele"

#: AppGUI/MainGUI.py:3981
msgid "New Excellon"
msgstr "Excellon nou"

#: AppGUI/MainGUI.py:3981
msgid "Move Obj"
msgstr "Mută Obiecte"

#: AppGUI/MainGUI.py:3981
msgid "New Geometry"
msgstr "Geometrie Noua"

#: AppGUI/MainGUI.py:3981
msgid "Change Units"
msgstr "Comută Unitati"

#: AppGUI/MainGUI.py:3982
msgid "Open Properties Tool"
msgstr "Deschide Unealta Proprietati"

#: AppGUI/MainGUI.py:3982
msgid "Rotate by 90 degree CW"
msgstr "Roteste cu 90 grade CW"

#: AppGUI/MainGUI.py:3982
msgid "Shell Toggle"
msgstr "Comuta Linie de comanda"

#: AppGUI/MainGUI.py:3983
msgid ""
"Add a Tool (when in Geometry Selected Tab or in Tools NCC or Tools Paint)"
msgstr ""
"Adaugă o Unealtă (cand ne aflam in tab-ul Selected al Geometriei sau in "
"Unealta NCC sau in unealta Paint)"

#: AppGUI/MainGUI.py:3984
msgid "Flip on X_axis"
msgstr "Oglindește pe axa X"

#: AppGUI/MainGUI.py:3984
msgid "Flip on Y_axis"
msgstr "Oglindește pe axa Y"

#: AppGUI/MainGUI.py:3987
msgid "Copy Obj"
msgstr "Copiază Obiecte"

#: AppGUI/MainGUI.py:3987
msgid "Open Tools Database"
msgstr "Deschide baza de date Unelte"

#: AppGUI/MainGUI.py:3988
msgid "Open Excellon File"
msgstr "Încarcă un fisier Excellon"

#: AppGUI/MainGUI.py:3988
msgid "Open Gerber File"
msgstr "Încarcă un fisier Gerber"

#: AppGUI/MainGUI.py:3988
msgid "New Project"
msgstr "Un Nou Project"

#: AppGUI/MainGUI.py:3989 App_Main.py:6876 App_Main.py:6879
msgid "Open Project"
msgstr "Încarcă Project"

#: AppGUI/MainGUI.py:3989 AppTools/ToolPDF.py:41
msgid "PDF Import Tool"
msgstr "Unealta import PDF"

#: AppGUI/MainGUI.py:3989
msgid "Save Project"
msgstr "Salvează Proiectul"

#: AppGUI/MainGUI.py:3989
msgid "Toggle Plot Area"
msgstr "Comută Aria de Afișare"

#: AppGUI/MainGUI.py:3992
msgid "Copy Obj_Name"
msgstr "Copiază Nume Obiect"

#: AppGUI/MainGUI.py:3993
msgid "Toggle Code Editor"
msgstr "Comută Editorul de cod"

#: AppGUI/MainGUI.py:3993
msgid "Toggle the axis"
msgstr "Comută Reprezentare Axe"

#: AppGUI/MainGUI.py:3993 AppGUI/MainGUI.py:4192 AppGUI/MainGUI.py:4279
#: AppGUI/MainGUI.py:4401
msgid "Distance Minimum Tool"
msgstr "Unealta Distanță minimă"

#: AppGUI/MainGUI.py:3994
msgid "Open Preferences Window"
msgstr "Deschide Preferințe"

#: AppGUI/MainGUI.py:3995
msgid "Rotate by 90 degree CCW"
msgstr "Roteste cu 90 grade CCW"

#: AppGUI/MainGUI.py:3995
msgid "Run a Script"
msgstr "Rulează TCL script"

#: AppGUI/MainGUI.py:3995
msgid "Toggle the workspace"
msgstr "Comută Suprafata de lucru"

#: AppGUI/MainGUI.py:3995
msgid "Skew on X axis"
msgstr "Deformare pe axa X"

#: AppGUI/MainGUI.py:3996
msgid "Skew on Y axis"
msgstr "Deformare pe axa Y"

#: AppGUI/MainGUI.py:3999
msgid "2-Sided PCB Tool"
msgstr "Unealta 2-fețe"

#: AppGUI/MainGUI.py:3999
msgid "Transformations Tool"
msgstr "Unealta Transformări"

#: AppGUI/MainGUI.py:4001
msgid "Solder Paste Dispensing Tool"
msgstr "Unealta DispensorPF"

#: AppGUI/MainGUI.py:4002
msgid "Film PCB Tool"
msgstr "Unealta Film"

#: AppGUI/MainGUI.py:4002
msgid "Non-Copper Clearing Tool"
msgstr "Curățăre Non-Cupru"

#: AppGUI/MainGUI.py:4003
msgid "Paint Area Tool"
msgstr "Unealta Paint"

#: AppGUI/MainGUI.py:4003
msgid "Rules Check Tool"
msgstr "Unealta Verificari Reguli"

#: AppGUI/MainGUI.py:4004
msgid "View File Source"
msgstr "Vizualiz. Cod Sursă"

#: AppGUI/MainGUI.py:4005
msgid "Cutout PCB Tool"
msgstr "Unealta Decupare"

#: AppGUI/MainGUI.py:4005
msgid "Enable all Plots"
msgstr "Activează Afișare pt Tot"

#: AppGUI/MainGUI.py:4005
msgid "Disable all Plots"
msgstr "Dezactivează Afișare pt Tot"

#: AppGUI/MainGUI.py:4005
msgid "Disable Non-selected Plots"
msgstr "Dezactivează ne-selectate"

#: AppGUI/MainGUI.py:4006
msgid "Toggle Full Screen"
msgstr "Comută FullScreen"

#: AppGUI/MainGUI.py:4009
msgid "Abort current task (gracefully)"
msgstr "Renutna la task"

#: AppGUI/MainGUI.py:4012
msgid "Save Project As"
msgstr "Salvează Proiectul ca"

#: AppGUI/MainGUI.py:4013
msgid ""
"Paste Special. Will convert a Windows path style to the one required in Tcl "
"Shell"
msgstr ""
"Lipire specială. Va converti stilul de adresa cale Windows in cel necesar in "
"Tcl Shell"

#: AppGUI/MainGUI.py:4016
msgid "Open Online Manual"
msgstr "Deschide Manualul Online"

#: AppGUI/MainGUI.py:4017
msgid "Open Online Tutorials"
msgstr "Deschide Tutoriale Online"

#: AppGUI/MainGUI.py:4017
msgid "Refresh Plots"
msgstr "Improspatare Afișare"

#: AppGUI/MainGUI.py:4017 AppTools/ToolSolderPaste.py:509
msgid "Delete Object"
msgstr "Șterge Obiectul"

#: AppGUI/MainGUI.py:4017
msgid "Alternate: Delete Tool"
msgstr "Alternativ: Șterge Unealta"

#: AppGUI/MainGUI.py:4018
msgid "(left to Key_1)Toggle Notebook Area (Left Side)"
msgstr "(in stanga tasta 1) Comutați zona Notebook (partea stângă)"

#: AppGUI/MainGUI.py:4018
msgid "En(Dis)able Obj Plot"
msgstr "(Dez)activează Afișare"

#: AppGUI/MainGUI.py:4019
msgid "Deselects all objects"
msgstr "Deselectează toate obiectele"

#: AppGUI/MainGUI.py:4033
msgid "Editor Shortcut list"
msgstr "Lista de shortcut-uri"

#: AppGUI/MainGUI.py:4187
msgid "GEOMETRY EDITOR"
msgstr "EDITOR GEOMETRIE"

#: AppGUI/MainGUI.py:4187
msgid "Draw an Arc"
msgstr "Deseneaza un Arc"

#: AppGUI/MainGUI.py:4187
msgid "Copy Geo Item"
msgstr "Copiază Geo"

#: AppGUI/MainGUI.py:4188
msgid "Within Add Arc will toogle the ARC direction: CW or CCW"
msgstr "In cadrul 'Aadauga Arc' va comuta intre directiile arcului: CW sau CCW"

#: AppGUI/MainGUI.py:4188
msgid "Polygon Intersection Tool"
msgstr "Unealta Intersecţie Poligoane"

#: AppGUI/MainGUI.py:4189
msgid "Geo Paint Tool"
msgstr "Unealta Paint Geo"

#: AppGUI/MainGUI.py:4189 AppGUI/MainGUI.py:4278 AppGUI/MainGUI.py:4398
msgid "Jump to Location (x, y)"
msgstr "Sari la Locaţia (x, y)"

#: AppGUI/MainGUI.py:4189
msgid "Toggle Corner Snap"
msgstr "Comută lipire colt"

#: AppGUI/MainGUI.py:4189
msgid "Move Geo Item"
msgstr "Muta El. Geo"

#: AppGUI/MainGUI.py:4190
msgid "Within Add Arc will cycle through the ARC modes"
msgstr "In cadrul 'Adauga Arc' va trece circular prin tipurile de Arc"

#: AppGUI/MainGUI.py:4190
msgid "Draw a Polygon"
msgstr "Deseneaza un Poligon"

#: AppGUI/MainGUI.py:4190
msgid "Draw a Circle"
msgstr "Deseneaza un Cerc"

#: AppGUI/MainGUI.py:4191
msgid "Draw a Path"
msgstr "Deseneaza un Traseu"

#: AppGUI/MainGUI.py:4191
msgid "Draw Rectangle"
msgstr "Deseneaza un Patrulater"

#: AppGUI/MainGUI.py:4191
msgid "Polygon Subtraction Tool"
msgstr "Unealta Substracţie Poligoane"

#: AppGUI/MainGUI.py:4191
msgid "Add Text Tool"
msgstr "Unealta Adaugare Text"

#: AppGUI/MainGUI.py:4192
msgid "Polygon Union Tool"
msgstr "Unealta Uniune Poligoane"

#: AppGUI/MainGUI.py:4192
msgid "Flip shape on X axis"
msgstr "Oglindește pe axa X"

#: AppGUI/MainGUI.py:4192
msgid "Flip shape on Y axis"
msgstr "Oglindește pe axa Y"

#: AppGUI/MainGUI.py:4193
msgid "Skew shape on X axis"
msgstr "Deformare pe axa X"

#: AppGUI/MainGUI.py:4193
msgid "Skew shape on Y axis"
msgstr "Deformare pe axa Y"

#: AppGUI/MainGUI.py:4193
msgid "Editor Transformation Tool"
msgstr "Unealta Transformare in Editor"

#: AppGUI/MainGUI.py:4194
msgid "Offset shape on X axis"
msgstr "Ofset pe axa X"

#: AppGUI/MainGUI.py:4194
msgid "Offset shape on Y axis"
msgstr "Ofset pe axa Y"

#: AppGUI/MainGUI.py:4195 AppGUI/MainGUI.py:4281 AppGUI/MainGUI.py:4403
msgid "Save Object and Exit Editor"
msgstr "Salvează Obiectul și inchide Editorul"

#: AppGUI/MainGUI.py:4195
msgid "Polygon Cut Tool"
msgstr "Unealta Taiere Poligoane"

#: AppGUI/MainGUI.py:4196
msgid "Rotate Geometry"
msgstr "Roteste Geometrie"

#: AppGUI/MainGUI.py:4196
msgid "Finish drawing for certain tools"
msgstr "Termina de desenat (pt anumite unelte)"

#: AppGUI/MainGUI.py:4196 AppGUI/MainGUI.py:4281 AppGUI/MainGUI.py:4401
msgid "Abort and return to Select"
msgstr "Renutna si intoarce-te la Selectie"

#: AppGUI/MainGUI.py:4277
msgid "EXCELLON EDITOR"
msgstr "EDITOR EXCELLON"

#: AppGUI/MainGUI.py:4277
msgid "Copy Drill(s)"
msgstr "Copiaza Găurire"

#: AppGUI/MainGUI.py:4278
msgid "Move Drill(s)"
msgstr "Muta Găuri"

#: AppGUI/MainGUI.py:4279
msgid "Add a new Tool"
msgstr "Adaugă Unealta Noua"

#: AppGUI/MainGUI.py:4280
msgid "Delete Drill(s)"
msgstr "Șterge Găuri"

#: AppGUI/MainGUI.py:4280
msgid "Alternate: Delete Tool(s)"
msgstr "Alternativ: Șterge Unealta"

#: AppGUI/MainGUI.py:4397
msgid "GERBER EDITOR"
msgstr "EDITOR GERBER"

#: AppGUI/MainGUI.py:4397
msgid "Add Disc"
msgstr "Adaugă Disc"

#: AppGUI/MainGUI.py:4397
msgid "Add SemiDisc"
msgstr "Adaugă SemiDisc"

#: AppGUI/MainGUI.py:4399
msgid "Within Track & Region Tools will cycle in REVERSE the bend modes"
msgstr ""
"In cadrul uneltelor Traseu si Regiune va trece circular in Revers prin "
"modurile de indoire"

#: AppGUI/MainGUI.py:4400
msgid "Within Track & Region Tools will cycle FORWARD the bend modes"
msgstr ""
"In cadrul uneltelor Traseu si Regiune va trece circular in Avans prin "
"modurile de indoire"

#: AppGUI/MainGUI.py:4401
msgid "Alternate: Delete Apertures"
msgstr "Alternativ: Șterge Apertură"

#: AppGUI/MainGUI.py:4402
msgid "Eraser Tool"
msgstr "Unealta Stergere"

#: AppGUI/MainGUI.py:4403
#: AppGUI/preferences/gerber/GerberEditorPrefGroupUI.py:220
msgid "Mark Area Tool"
msgstr "Unealta de Marc. Arie"

#: AppGUI/MainGUI.py:4403
msgid "Poligonize Tool"
msgstr "Unealta Poligonizare"

#: AppGUI/MainGUI.py:4403
msgid "Transformation Tool"
msgstr "Unealta Transformare"

#: AppGUI/ObjectUI.py:38
msgid "FlatCAM Object"
msgstr "Obiect FlatCAM"

#: AppGUI/ObjectUI.py:78
msgid ""
"BASIC is suitable for a beginner. Many parameters\n"
"are hidden from the user in this mode.\n"
"ADVANCED mode will make available all parameters.\n"
"\n"
"To change the application LEVEL, go to:\n"
"Edit -> Preferences -> General and check:\n"
"'APP. LEVEL' radio button."
msgstr ""
"Modul de Bază este potrivit pt incepatori. Multi parametri sunt\n"
"ascunsi de user in acest mod.\n"
"Modul Avansat face disponibili toti parametrii programului.\n"
"\n"
"Pt a schimba modul de lucru al aplicaţiei mergi in:\n"
"Edit -> Preferințe -> General și bifează:\n"
"butonul radio: >Nivel App<."

#: AppGUI/ObjectUI.py:111
msgid "Geometrical transformations of the current object."
msgstr "Transformări geometrice ale obictului curent."

#: AppGUI/ObjectUI.py:120
msgid ""
"Factor by which to multiply\n"
"geometric features of this object.\n"
"Expressions are allowed. E.g: 1/25.4"
msgstr ""
"Factor cu care se multiplica \n"
"caracteristicile geometrice ale\n"
"acestui obiect.\n"
"Expresiile sunt permise. De ex: 1 / 25.4"

#: AppGUI/ObjectUI.py:127
msgid "Perform scaling operation."
msgstr "Efectuează operatia de scalare."

#: AppGUI/ObjectUI.py:138
msgid ""
"Amount by which to move the object\n"
"in the x and y axes in (x, y) format.\n"
"Expressions are allowed. E.g: (1/3.2, 0.5*3)"
msgstr ""
"Valoare cu cat să se deplaseze obiectul\n"
"pe axele X și /sau Y in formatul (x,y).\n"
"Expresiile sunt permise. De ex: (1/3.2, 0.5*3)"

#: AppGUI/ObjectUI.py:145
msgid "Perform the offset operation."
msgstr "Efectuează operația de Ofset."

#: AppGUI/ObjectUI.py:157 AppGUI/ObjectUI.py:164 AppTool.py:281 AppTool.py:287
msgid "Edited value is out of range"
msgstr "Valoarea editată este in afara limitelor"

#: AppGUI/ObjectUI.py:159 AppGUI/ObjectUI.py:166 AppTool.py:283 AppTool.py:289
msgid "Edited value is within limits."
msgstr "Valoarea editată este in limite."

#: AppGUI/ObjectUI.py:178 AppTools/ToolCorners.py:55
msgid "Gerber Object"
msgstr "Obiect Gerber"

#: AppGUI/ObjectUI.py:187 AppGUI/ObjectUI.py:730 AppGUI/ObjectUI.py:1528
#: AppGUI/ObjectUI.py:2335 AppGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:30
#: AppGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:33
#: AppGUI/preferences/geometry/GeometryGenPrefGroupUI.py:31
#: AppGUI/preferences/gerber/GerberGenPrefGroupUI.py:31
msgid "Plot Options"
msgstr "Opțiuni afișare"

#: AppGUI/ObjectUI.py:193 AppGUI/ObjectUI.py:731
#: AppGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:45
#: AppGUI/preferences/gerber/GerberGenPrefGroupUI.py:38
#: AppGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:119
#: AppTools/ToolCopperThieving.py:191
msgid "Solid"
msgstr "Solid"

#: AppGUI/ObjectUI.py:195 AppGUI/preferences/gerber/GerberGenPrefGroupUI.py:40
msgid "Solid color polygons."
msgstr "Poligoane color solide."

#: AppGUI/ObjectUI.py:201
msgid "Multi-Color"
msgstr "Multicolor"

#: AppGUI/ObjectUI.py:203 AppGUI/preferences/gerber/GerberGenPrefGroupUI.py:47
msgid "Draw polygons in different colors."
msgstr ""
"Desenează poligoanele Gerber din multiple culori\n"
"alese in mod aleator."

#: AppGUI/ObjectUI.py:209 AppGUI/ObjectUI.py:769
#: AppGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:39
#: AppGUI/preferences/geometry/GeometryGenPrefGroupUI.py:35
#: AppGUI/preferences/gerber/GerberGenPrefGroupUI.py:52
msgid "Plot"
msgstr "Afisează"

#: AppGUI/ObjectUI.py:211 AppGUI/ObjectUI.py:771 AppGUI/ObjectUI.py:1588
#: AppGUI/ObjectUI.py:2445 AppGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:41
#: AppGUI/preferences/geometry/GeometryGenPrefGroupUI.py:37
#: AppGUI/preferences/gerber/GerberGenPrefGroupUI.py:54
msgid "Plot (show) this object."
msgstr "Afisează (arata) acest obiect."

#: AppGUI/ObjectUI.py:239
msgid ""
"Toggle the display of the Gerber Apertures Table.\n"
"When unchecked, it will delete all mark shapes\n"
"that are drawn on canvas."
msgstr ""
"Comută afișarea tabelei de aperturi Gerber.\n"
"Când se debifează, toate marcajele aperturilor\n"
"care sutn curent afisate, vor fi șterse."

#: AppGUI/ObjectUI.py:249
msgid "Mark All"
msgstr "Marc. Toate"

#: AppGUI/ObjectUI.py:251
msgid ""
"When checked it will display all the apertures.\n"
"When unchecked, it will delete all mark shapes\n"
"that are drawn on canvas."
msgstr ""
"Când este bifat se vor afisa toate aperturile.\n"
"Când este debifat se vor șterge toate marcajele de aperturi."

#: AppGUI/ObjectUI.py:279
msgid "Mark the aperture instances on canvas."
msgstr "Marchează aperturile pe canvas."

#: AppGUI/ObjectUI.py:291 AppGUI/preferences/gerber/GerberOptPrefGroupUI.py:32
msgid "Isolation Routing"
msgstr "Izolare"

#: AppGUI/ObjectUI.py:293 AppGUI/preferences/gerber/GerberOptPrefGroupUI.py:34
msgid ""
"Create a Geometry object with\n"
"toolpaths to cut outside polygons."
msgstr ""
"Crează un obiect tip Geometrie cu trasee\n"
"care să fie taiate in afara poligoanelor,\n"
"urmărindu-le conturul."

#: AppGUI/ObjectUI.py:311
#: AppGUI/preferences/gerber/GerberAdvOptPrefGroupUI.py:69
msgid ""
"Choose which tool to use for Gerber isolation:\n"
"'Circular' or 'V-shape'.\n"
"When the 'V-shape' is selected then the tool\n"
"diameter will depend on the chosen cut depth."
msgstr ""
"Alegeți ce unealtă să utilizați pentru izolarea Gerber:\n"
"„Circulară” sau „în formă de V”.\n"
"Când este selectată „forma V”, atunci\n"
"diametrul uneltei va depinde de adâncimea de tăiere aleasă."

#: AppGUI/ObjectUI.py:317
msgid "V-Shape"
msgstr "Forma-V"

#: AppGUI/ObjectUI.py:323 AppGUI/ObjectUI.py:1774
#: AppGUI/preferences/gerber/GerberAdvOptPrefGroupUI.py:81
#: AppGUI/preferences/tools/ToolsNCCPrefGroupUI.py:72
#: AppGUI/preferences/tools/ToolsPaintPrefGroupUI.py:78
#: AppGUI/preferences/tools/ToolsPaintPrefGroupUI.py:85 AppTools/ToolNCC.py:233
#: AppTools/ToolNCC.py:240 AppTools/ToolPaint.py:215
msgid "V-Tip Dia"
msgstr "V-dia"

#: AppGUI/ObjectUI.py:325 AppGUI/ObjectUI.py:1777
#: AppGUI/preferences/gerber/GerberAdvOptPrefGroupUI.py:83
#: AppGUI/preferences/tools/ToolsNCCPrefGroupUI.py:74
#: AppGUI/preferences/tools/ToolsPaintPrefGroupUI.py:80 AppTools/ToolNCC.py:235
#: AppTools/ToolPaint.py:217
msgid "The tip diameter for V-Shape Tool"
msgstr ""
"Diametrul la vârf al uneltei tip V-Shape.\n"
"Forma in V"

#: AppGUI/ObjectUI.py:336 AppGUI/ObjectUI.py:1789
#: AppGUI/preferences/gerber/GerberAdvOptPrefGroupUI.py:94
#: AppGUI/preferences/tools/ToolsNCCPrefGroupUI.py:84
#: AppGUI/preferences/tools/ToolsPaintPrefGroupUI.py:91
#: AppGUI/preferences/tools/ToolsPaintPrefGroupUI.py:99 AppTools/ToolNCC.py:246
#: AppTools/ToolNCC.py:254 AppTools/ToolPaint.py:228
msgid "V-Tip Angle"
msgstr "V-unghi"

#: AppGUI/ObjectUI.py:338 AppGUI/ObjectUI.py:1792
#: AppGUI/preferences/gerber/GerberAdvOptPrefGroupUI.py:96
#: AppGUI/preferences/tools/ToolsNCCPrefGroupUI.py:86
#: AppGUI/preferences/tools/ToolsPaintPrefGroupUI.py:93 AppTools/ToolNCC.py:248
#: AppTools/ToolPaint.py:230
msgid ""
"The tip angle for V-Shape Tool.\n"
"In degree."
msgstr ""
"Unghiul la vârf pentru unealta tip V-Shape. \n"
"In grade."

#: AppGUI/ObjectUI.py:352 AppGUI/ObjectUI.py:1808
#: AppGUI/preferences/geometry/GeometryOptPrefGroupUI.py:50
#: AppGUI/preferences/gerber/GerberAdvOptPrefGroupUI.py:109
#: AppGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:61
#: AppObjects/FlatCAMGeometry.py:1229 AppTools/ToolCutOut.py:141
msgid ""
"Cutting depth (negative)\n"
"below the copper surface."
msgstr ""
"Adâncimea la care se taie sub suprafata de cupru.\n"
"Valoare negativă."

#: AppGUI/ObjectUI.py:366
msgid ""
"Diameter of the cutting tool.\n"
"If you want to have an isolation path\n"
"inside the actual shape of the Gerber\n"
"feature, use a negative value for\n"
"this parameter."
msgstr ""
"Diametrul uneltei taietoare.\n"
"Daca se dorește să se aibă o trecere de izolaţie\n"
"in interiorul poligonului Gerber (traseu), foloseşte\n"
"o valoare negativă pt acest parametru."

#: AppGUI/ObjectUI.py:382 AppGUI/preferences/gerber/GerberOptPrefGroupUI.py:56
msgid "# Passes"
msgstr "# Treceri"

#: AppGUI/ObjectUI.py:384 AppGUI/preferences/gerber/GerberOptPrefGroupUI.py:58
msgid ""
"Width of the isolation gap in\n"
"number (integer) of tool widths."
msgstr ""
"Lăţimea spatiului de izolare\n"
"in număr intreg de grosimi ale uneltei."

#: AppGUI/ObjectUI.py:395 AppGUI/preferences/gerber/GerberOptPrefGroupUI.py:68
msgid "Pass overlap"
msgstr "Suprapunere"

#: AppGUI/ObjectUI.py:397 AppGUI/preferences/gerber/GerberOptPrefGroupUI.py:70
msgid "How much (percentage) of the tool width to overlap each tool pass."
msgstr ""
"Cat de mult (procent) din diametrul uneltei, (lăţimea de tăiere), să se "
"suprapună peste trecerea anterioară."

#: AppGUI/ObjectUI.py:411
#: AppGUI/preferences/geometry/GeometryEditorPrefGroupUI.py:58
#: AppGUI/preferences/gerber/GerberOptPrefGroupUI.py:97
msgid ""
"Milling type:\n"
"- climb / best for precision milling and to reduce tool usage\n"
"- conventional / useful when there is no backlash compensation"
msgstr ""
"Tipul de frezare:\n"
"- urcare -> potrivit pentru frezare de precizie și pt a reduce uzura "
"uneltei\n"
"- conventional -> pentru cazul când nu exista o compensare a 'backlash-ului'"

#: AppGUI/ObjectUI.py:421
msgid "Combine"
msgstr "Combina"

#: AppGUI/ObjectUI.py:423 AppGUI/preferences/gerber/GerberOptPrefGroupUI.py:109
msgid "Combine all passes into one object"
msgstr "Combina toate trecerile intr-un singur obiect"

#: AppGUI/ObjectUI.py:427
#: AppGUI/preferences/gerber/GerberAdvOptPrefGroupUI.py:43
msgid "\"Follow\""
msgstr "\"Urmareste\""

#: AppGUI/ObjectUI.py:428
#: AppGUI/preferences/gerber/GerberAdvOptPrefGroupUI.py:45
msgid ""
"Generate a 'Follow' geometry.\n"
"This means that it will cut through\n"
"the middle of the trace."
msgstr ""
"Generează o geometrie de tip 'urmăritor'.\n"
"Mai exact, in loc să se genereze un poligon se va genera o 'linie'.\n"
"In acest fel se taie prin mijlocul unui traseu și nu in jurul lui."

#: AppGUI/ObjectUI.py:434
msgid "Except"
msgstr "Exceptie"

#: AppGUI/ObjectUI.py:437
msgid ""
"When the isolation geometry is generated,\n"
"by checking this, the area of the object below\n"
"will be subtracted from the isolation geometry."
msgstr ""
"Cand un obiect de geometrie tip Izolare este creat,\n"
"prin bifarea aici, aria obiectului de mai jos va fi\n"
"scăzută din geometria de tip Izolare."

#: AppGUI/ObjectUI.py:450
#: AppGUI/preferences/tools/ToolsPanelizePrefGroupUI.py:97
#: AppObjects/FlatCAMGerber.py:239 AppObjects/FlatCAMGerber.py:327
#: AppTools/ToolAlignObjects.py:73 AppTools/ToolAlignObjects.py:109
#: AppTools/ToolCalibration.py:196 AppTools/ToolCalibration.py:631
#: AppTools/ToolCalibration.py:648 AppTools/ToolCalibration.py:807
#: AppTools/ToolCalibration.py:815 AppTools/ToolCopperThieving.py:144
#: AppTools/ToolCopperThieving.py:158 AppTools/ToolCopperThieving.py:604
#: AppTools/ToolCutOut.py:91 AppTools/ToolDblSided.py:224
#: AppTools/ToolFilm.py:68 AppTools/ToolFilm.py:91 AppTools/ToolImage.py:49
#: AppTools/ToolImage.py:252 AppTools/ToolImage.py:273 AppTools/ToolNCC.py:96
#: AppTools/ToolNCC.py:558 AppTools/ToolNCC.py:1300 AppTools/ToolPaint.py:501
#: AppTools/ToolPaint.py:705 AppTools/ToolPanelize.py:116
#: AppTools/ToolPanelize.py:210 AppTools/ToolPanelize.py:385
#: AppTools/ToolPanelize.py:402
msgid "Gerber"
msgstr "Gerber"

#: AppGUI/ObjectUI.py:457 AppTools/ToolNCC.py:86 AppTools/ToolPaint.py:79
msgid "Obj Type"
msgstr "Tip obiect"

#: AppGUI/ObjectUI.py:459
msgid ""
"Specify the type of object to be excepted from isolation.\n"
"It can be of type: Gerber or Geometry.\n"
"What is selected here will dictate the kind\n"
"of objects that will populate the 'Object' combobox."
msgstr ""
"Specifica obiectul care va fi exceptat de la izolare.\n"
"Poate fi de tip: Gerber sau Geometrie.\n"
"Ce se va selecta aici va controla tipul de \n"
"obiecte care vor aparea in combobox-ul\n"
"numit >Obiect<."

#: AppGUI/ObjectUI.py:472 AppGUI/ObjectUI.py:1324 AppGUI/ObjectUI.py:2158
#: AppGUI/preferences/tools/Tools2CalPrefGroupUI.py:48
#: AppTools/ToolCalibration.py:186 AppTools/ToolNCC.py:109
#: AppTools/ToolPaint.py:102 AppTools/ToolPanelize.py:98
#: AppTools/ToolQRCode.py:78
msgid "Object"
msgstr "Obiect"

#: AppGUI/ObjectUI.py:473
msgid "Object whose area will be removed from isolation geometry."
msgstr ""
"Obiectul a cărui suprafată va fi indepărtată din geometria tip Izolare."

#: AppGUI/ObjectUI.py:480 AppGUI/preferences/gerber/GerberOptPrefGroupUI.py:82
msgid "Scope"
msgstr "Domeniu"

#: AppGUI/ObjectUI.py:482 AppGUI/preferences/gerber/GerberOptPrefGroupUI.py:84
msgid ""
"Isolation scope. Choose what to isolate:\n"
"- 'All' -> Isolate all the polygons in the object\n"
"- 'Selection' -> Isolate a selection of polygons."
msgstr ""
"Domeniul de izolare. Alegeți ce să izolați:\n"
"- 'Toate' -> Izolați toate poligoanele din obiect\n"
"- 'Selecție' -> Izolați o selecție de poligoane."

#: AppGUI/ObjectUI.py:487
#: AppGUI/preferences/general/GeneralGUIPrefGroupUI.py:307
#: AppGUI/preferences/gerber/GerberOptPrefGroupUI.py:89
#: AppGUI/preferences/tools/ToolsNCCPrefGroupUI.py:311
#: AppGUI/preferences/tools/ToolsPaintPrefGroupUI.py:258
#: AppTools/ToolNCC.py:539 AppTools/ToolPaint.py:455
msgid "Selection"
msgstr "Selecţie"

#: AppGUI/ObjectUI.py:495
#: AppGUI/preferences/gerber/GerberAdvOptPrefGroupUI.py:122
msgid "Isolation Type"
msgstr "Tip de izolare"

#: AppGUI/ObjectUI.py:497
#: AppGUI/preferences/gerber/GerberAdvOptPrefGroupUI.py:124
msgid ""
"Choose how the isolation will be executed:\n"
"- 'Full' -> complete isolation of polygons\n"
"- 'Ext' -> will isolate only on the outside\n"
"- 'Int' -> will isolate only on the inside\n"
"'Exterior' isolation is almost always possible\n"
"(with the right tool) but 'Interior'\n"
"isolation can be done only when there is an opening\n"
"inside of the polygon (e.g polygon is a 'doughnut' shape)."
msgstr ""
"Alegeți modul în care se va executa izolarea:\n"
"- 'Complet' -> izolarea completă a poligoanelor din obiect\n"
"- „Ext” -> se va izola doar la exterior\n"
"- „Int” -> se va izola doar pe interior\n"
"Izolarea „exterioară” este aproape întotdeauna posibilă\n"
"(cu instrumentul potrivit), dar izolarea\n"
"„Interior”se poate face numai atunci când există o deschidere\n"
"în interiorul poligonului (de exemplu, poligonul are o formă de „gogoașă”)."

#: AppGUI/ObjectUI.py:506
#: AppGUI/preferences/gerber/GerberAdvOptPrefGroupUI.py:133
#: AppGUI/preferences/gerber/GerberAdvOptPrefGroupUI.py:154
msgid "Full"
msgstr "Complet"

#: AppGUI/ObjectUI.py:507
msgid "Ext"
msgstr "Ext"

#: AppGUI/ObjectUI.py:508
msgid "Int"
msgstr "Int"

#: AppGUI/ObjectUI.py:513
msgid "Generate Isolation Geometry"
msgstr "Creează Geometrie de Izolare"

#: AppGUI/ObjectUI.py:521
msgid ""
"Create a Geometry object with toolpaths to cut \n"
"isolation outside, inside or on both sides of the\n"
"object. For a Gerber object outside means outside\n"
"of the Gerber feature and inside means inside of\n"
"the Gerber feature, if possible at all. This means\n"
"that only if the Gerber feature has openings inside, they\n"
"will be isolated. If what is wanted is to cut isolation\n"
"inside the actual Gerber feature, use a negative tool\n"
"diameter above."
msgstr ""
"Crează un obiect Geometrie cu treceri taietoare pentru\n"
"a efectua o izolare in afară, in interior sau pe ambele parti\n"
"ale obiectului.\n"
"Pt un Gerber >in afară< inseamna in exteriorul elem. Gerber\n"
"(traseu, zona etc) iar >in interior< inseamna efectiv in interiorul\n"
"acelui elem. Gerber (daca poate fi posibil)."

#: AppGUI/ObjectUI.py:533
msgid "Buffer Solid Geometry"
msgstr "Creează Bufer Geometrie Solidă"

#: AppGUI/ObjectUI.py:535
msgid ""
"This button is shown only when the Gerber file\n"
"is loaded without buffering.\n"
"Clicking this will create the buffered geometry\n"
"required for isolation."
msgstr ""
"Acest control este afisat doar cand este incărcat un\n"
"fisier Gerber fără să fie buferată geometria sa.\n"
"Bifarea aici va crea această buferare care este necesară\n"
"pentru a crea geometrie de tip Izolare."

#: AppGUI/ObjectUI.py:567
msgid "Clear N-copper"
msgstr "Curăță Non-Cu"

#: AppGUI/ObjectUI.py:569 AppGUI/preferences/tools/ToolsNCCPrefGroupUI.py:33
msgid ""
"Create a Geometry object with\n"
"toolpaths to cut all non-copper regions."
msgstr ""
"Crează un obiect tip Geometrie cu traiectorii unealtă\n"
"care să curete de cupru toate zonele unde se dorește să nu \n"
"fie cupru."

#: AppGUI/ObjectUI.py:576 AppGUI/ObjectUI.py:2289 AppTools/ToolNCC.py:599
msgid ""
"Create the Geometry Object\n"
"for non-copper routing."
msgstr ""
"Crează un obiect Geometrie\n"
"pt rutare non-cupru (adica pt\n"
"curățare zone de cupru)."

#: AppGUI/ObjectUI.py:589
msgid "Board cutout"
msgstr "Decupare PCB"

#: AppGUI/ObjectUI.py:591 AppGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:34
msgid ""
"Create toolpaths to cut around\n"
"the PCB and separate it from\n"
"the original board."
msgstr ""
"Crează taieturi de jur inprejurul PCB-ului,\n"
"lasand punţi pentru a separa PCB-ul de \n"
"placa din care a fost taiat."

#: AppGUI/ObjectUI.py:598
msgid ""
"Generate the geometry for\n"
"the board cutout."
msgstr ""
"Generează un obiect Geometrie\n"
"pt decuparea PCB."

#: AppGUI/ObjectUI.py:616 AppGUI/preferences/gerber/GerberOptPrefGroupUI.py:119
msgid "Non-copper regions"
msgstr "Regiuni fără Cu"

#: AppGUI/ObjectUI.py:618 AppGUI/preferences/gerber/GerberOptPrefGroupUI.py:121
msgid ""
"Create polygons covering the\n"
"areas without copper on the PCB.\n"
"Equivalent to the inverse of this\n"
"object. Can be used to remove all\n"
"copper from a specified region."
msgstr ""
"Crează poligoane acopering zonele fără\n"
"cupru de pe PCB. Echivalent cu inversul\n"
"obiectului sursa. Poate fi folosit pt a indeparta\n"
"cuprul din zona specificata."

#: AppGUI/ObjectUI.py:628 AppGUI/ObjectUI.py:669
#: AppGUI/preferences/gerber/GerberOptPrefGroupUI.py:133
#: AppGUI/preferences/gerber/GerberOptPrefGroupUI.py:166
msgid "Boundary Margin"
msgstr "Margine"

#: AppGUI/ObjectUI.py:630 AppGUI/preferences/gerber/GerberOptPrefGroupUI.py:135
msgid ""
"Specify the edge of the PCB\n"
"by drawing a box around all\n"
"objects with this minimum\n"
"distance."
msgstr ""
"Specificati marginea PCB-ului prin desenarea\n"
"unei forme patratice de jur imprejurul la toate obiectele\n"
"la o distanţa minima cu valoarea din acest câmp."

#: AppGUI/ObjectUI.py:645 AppGUI/ObjectUI.py:683
#: AppGUI/preferences/gerber/GerberOptPrefGroupUI.py:148
#: AppGUI/preferences/gerber/GerberOptPrefGroupUI.py:179
msgid "Rounded Geo"
msgstr "Geo rotunjita"

#: AppGUI/ObjectUI.py:647 AppGUI/preferences/gerber/GerberOptPrefGroupUI.py:150
msgid "Resulting geometry will have rounded corners."
msgstr ""
"Obiectul Geometrie rezultat \n"
"va avea colțurile rotunjite."

#: AppGUI/ObjectUI.py:651 AppGUI/ObjectUI.py:692
#: AppTools/ToolSolderPaste.py:134
msgid "Generate Geo"
msgstr "Crează Geo"

#: AppGUI/ObjectUI.py:661 AppGUI/preferences/gerber/GerberOptPrefGroupUI.py:160
#: AppGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:137
#: AppTools/ToolPanelize.py:99 AppTools/ToolQRCode.py:192
msgid "Bounding Box"
msgstr "Forma înconjurătoare"

#: AppGUI/ObjectUI.py:663
msgid ""
"Create a geometry surrounding the Gerber object.\n"
"Square shape."
msgstr ""
"Generează un obiect tip Geometrie care va inconjura\n"
"obiectul Gerber. Forma patratica (rectangulara)."

#: AppGUI/ObjectUI.py:671 AppGUI/preferences/gerber/GerberOptPrefGroupUI.py:168
msgid ""
"Distance of the edges of the box\n"
"to the nearest polygon."
msgstr ""
"Distanta de la marginile formei înconjurătoare\n"
"pana la cel mai apropiat poligon."

#: AppGUI/ObjectUI.py:685 AppGUI/preferences/gerber/GerberOptPrefGroupUI.py:181
msgid ""
"If the bounding box is \n"
"to have rounded corners\n"
"their radius is equal to\n"
"the margin."
msgstr ""
"Daca forma înconjurătoare să aibă colțuri rotunjite.\n"
"Raza acesor colțuri va fi egală cu parametrul Margine."

#: AppGUI/ObjectUI.py:694
msgid "Generate the Geometry object."
msgstr "Generează obiectul Geometrie."

#: AppGUI/ObjectUI.py:721
msgid "Excellon Object"
msgstr "Obiect Excellon"

#: AppGUI/ObjectUI.py:733
msgid "Solid circles."
msgstr "Cercuri solide."

#: AppGUI/ObjectUI.py:781 AppGUI/ObjectUI.py:876 AppGUI/ObjectUI.py:2466
#: AppGUI/preferences/excellon/ExcellonOptPrefGroupUI.py:71
#: AppTools/ToolProperties.py:166
msgid "Drills"
msgstr "Găuri"

#: AppGUI/ObjectUI.py:781 AppGUI/ObjectUI.py:877 AppGUI/ObjectUI.py:2466
#: AppGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:158
#: AppGUI/preferences/excellon/ExcellonOptPrefGroupUI.py:72
#: AppTools/ToolProperties.py:168
msgid "Slots"
msgstr "Sloturi"

#: AppGUI/ObjectUI.py:786
msgid ""
"This is the Tool Number.\n"
"When ToolChange is checked, on toolchange event this value\n"
"will be showed as a T1, T2 ... Tn in the Machine Code.\n"
"\n"
"Here the tools are selected for G-code generation."
msgstr ""
"Acesta este numărul uneltei.\n"
"Când se foloseşte optiunea de pauza pt schimb unealtă,\n"
"la evenim. de schimb unealtă, va aparea sub forma T1, T2, etc\n"
"in codul masina CNC.\n"
"Aici se selectează uneltele pt generarea de G-Code."

#: AppGUI/ObjectUI.py:791 AppGUI/ObjectUI.py:1612 AppTools/ToolPaint.py:141
msgid ""
"Tool Diameter. It's value (in current FlatCAM units) \n"
"is the cut width into the material."
msgstr ""
"Diametrul uneltei. Valoarea să (in unitati curente)\n"
"reprezinta lăţimea taieturii in material."

#: AppGUI/ObjectUI.py:794
msgid ""
"The number of Drill holes. Holes that are drilled with\n"
"a drill bit."
msgstr ""
"Numărul de găuri. Sunt găuri efectuate prin\n"
"operațiuni de găurire efectuate cu un burghiu."

#: AppGUI/ObjectUI.py:797
msgid ""
"The number of Slot holes. Holes that are created by\n"
"milling them with an endmill bit."
msgstr ""
"Numărul de sloturi. Sunt găuri efectuate\n"
"prin op. de frezare cu o freza."

#: AppGUI/ObjectUI.py:800
msgid ""
"Toggle display of the drills for the current tool.\n"
"This does not select the tools for G-code generation."
msgstr ""
"Comută afișarea găurilor pt unealta curentă.\n"
"Aceata nu selectează uneltele pt generarea G-Code."

#: AppGUI/ObjectUI.py:818 AppGUI/ObjectUI.py:1764
#: AppObjects/FlatCAMExcellon.py:527 AppObjects/FlatCAMExcellon.py:805
#: AppObjects/FlatCAMExcellon.py:821 AppObjects/FlatCAMExcellon.py:825
#: AppObjects/FlatCAMGeometry.py:322 AppObjects/FlatCAMGeometry.py:816
#: AppObjects/FlatCAMGeometry.py:852 AppTools/ToolNCC.py:331
#: AppTools/ToolNCC.py:797 AppTools/ToolNCC.py:811 AppTools/ToolNCC.py:1196
#: AppTools/ToolPaint.py:313 AppTools/ToolPaint.py:766
#: AppTools/ToolPaint.py:778 AppTools/ToolPaint.py:1170
msgid "Parameters for"
msgstr "Parametri pt"

#: AppGUI/ObjectUI.py:821 AppGUI/ObjectUI.py:1767 AppTools/ToolNCC.py:334
#: AppTools/ToolPaint.py:316
msgid ""
"The data used for creating GCode.\n"
"Each tool store it's own set of such data."
msgstr ""
"Datele folosite pentru crearea codului GCode.\n"
"Fiecare unealtă stochează un subset de asemenea date."

#: AppGUI/ObjectUI.py:847
#: AppGUI/preferences/excellon/ExcellonOptPrefGroupUI.py:48
msgid ""
"Operation type:\n"
"- Drilling -> will drill the drills/slots associated with this tool\n"
"- Milling -> will mill the drills/slots"
msgstr ""
"Tip operatie:\n"
"- Găurire -> va găuri găurile/sloturile associate acestei unelte\n"
"- Frezare -> va freza găurile/sloturile"

#: AppGUI/ObjectUI.py:853
#: AppGUI/preferences/excellon/ExcellonOptPrefGroupUI.py:54
msgid "Drilling"
msgstr "Găurire"

#: AppGUI/ObjectUI.py:854
#: AppGUI/preferences/excellon/ExcellonOptPrefGroupUI.py:55
msgid "Milling"
msgstr "Frezare"

#: AppGUI/ObjectUI.py:869
#: AppGUI/preferences/excellon/ExcellonOptPrefGroupUI.py:64
msgid ""
"Milling type:\n"
"- Drills -> will mill the drills associated with this tool\n"
"- Slots -> will mill the slots associated with this tool\n"
"- Both -> will mill both drills and mills or whatever is available"
msgstr ""
"Tip frezare:\n"
"- Găuri -> va freza găurile asociate acestei unelte\n"
"- Sloturi -> va freza sloturile asociate acestei unelte\n"
"- Ambele -> va freza atat găurile cat si sloturile sau doar acelea care sunt "
"disponibile"

#: AppGUI/ObjectUI.py:878
#: AppGUI/preferences/excellon/ExcellonOptPrefGroupUI.py:73
#: AppGUI/preferences/tools/ToolsFilmPrefGroupUI.py:210
#: AppTools/ToolFilm.py:241
msgid "Both"
msgstr "Ambele"

#: AppGUI/ObjectUI.py:886
#: AppGUI/preferences/excellon/ExcellonOptPrefGroupUI.py:80
msgid "Milling Diameter"
msgstr "Dia frezare"

#: AppGUI/ObjectUI.py:888
#: AppGUI/preferences/excellon/ExcellonOptPrefGroupUI.py:82
msgid "The diameter of the tool who will do the milling"
msgstr "Diametrul frezei când se frezează sloturile"

#: AppGUI/ObjectUI.py:902
#: AppGUI/preferences/excellon/ExcellonOptPrefGroupUI.py:95
msgid ""
"Drill depth (negative)\n"
"below the copper surface."
msgstr ""
"Adâncimea de tăiere (valoare negativă).\n"
"Daca se foloseşte o val. pozitivă, aplicaţia\n"
"va incerca in mod automat să schimbe semnul."

#: AppGUI/ObjectUI.py:921 AppGUI/ObjectUI.py:1826
#: AppGUI/preferences/excellon/ExcellonOptPrefGroupUI.py:113
#: AppGUI/preferences/geometry/GeometryOptPrefGroupUI.py:68
#: AppGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:79
#: AppTools/ToolCutOut.py:159
msgid "Multi-Depth"
msgstr "Multi-Pas"

#: AppGUI/ObjectUI.py:924 AppGUI/ObjectUI.py:1829
#: AppGUI/preferences/excellon/ExcellonOptPrefGroupUI.py:116
#: AppGUI/preferences/geometry/GeometryOptPrefGroupUI.py:71
#: AppGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:82
#: AppTools/ToolCutOut.py:162
msgid ""
"Use multiple passes to limit\n"
"the cut depth in each pass. Will\n"
"cut multiple times until Cut Z is\n"
"reached."
msgstr ""
"Folosiți mai multe pase pentru a limita\n"
"adâncimea tăiată în fiecare trecere. Se\n"
"va tăia de mai multe ori până când este\n"
"atins Z de tăiere, Z Cut."

#: AppGUI/ObjectUI.py:937 AppGUI/ObjectUI.py:1843
#: AppGUI/preferences/excellon/ExcellonOptPrefGroupUI.py:128
#: AppGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:94
#: AppTools/ToolCutOut.py:176
msgid "Depth of each pass (positive)."
msgstr ""
"Adâncimea pentru fiecare trecere.\n"
"Valoare pozitivă, in unitatile curente."

#: AppGUI/ObjectUI.py:948
#: AppGUI/preferences/excellon/ExcellonOptPrefGroupUI.py:136
msgid ""
"Tool height when travelling\n"
"across the XY plane."
msgstr ""
"Înălţimea la care unealtă se deplasează\n"
"in planul X-Y, fără a efectua taieri, adica\n"
"in afara materialului."

#: AppGUI/ObjectUI.py:969 AppGUI/ObjectUI.py:1873
#: AppGUI/preferences/geometry/GeometryOptPrefGroupUI.py:187
msgid ""
"Cutting speed in the XY\n"
"plane in units per minute"
msgstr ""
"Viteza de tăiere in planul X-Y\n"
"in unitati pe minut"

#: AppGUI/ObjectUI.py:984
#: AppGUI/preferences/excellon/ExcellonOptPrefGroupUI.py:209
msgid ""
"Tool speed while drilling\n"
"(in units per minute).\n"
"So called 'Plunge' feedrate.\n"
"This is for linear move G01."
msgstr ""
"Viteza uneltei când se face găuriea\n"
"(in unitati pe minut).\n"
"Asa numita viteza unealta tip \"plunge\".\n"
"Aceasta este mișcarea lineara G01."

#: AppGUI/ObjectUI.py:999 AppGUI/ObjectUI.py:1900
#: AppGUI/preferences/excellon/ExcellonAdvOptPrefGroupUI.py:80
#: AppGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:64
msgid "Feedrate Rapids"
msgstr "Feedrate rapizi"

#: AppGUI/ObjectUI.py:1001
#: AppGUI/preferences/excellon/ExcellonAdvOptPrefGroupUI.py:82
msgid ""
"Tool speed while drilling\n"
"(in units per minute).\n"
"This is for the rapid move G00.\n"
"It is useful only for Marlin,\n"
"ignore for any other cases."
msgstr ""
"Viteza de găurire, in unitati pe minut.\n"
"Corespunde comenzii G0 și este utila doar pentru\n"
"printerul 3D Marlin, implicit când se foloseşte fişierul\n"
"postprocesor: Marlin. Ignora aceasta parametru in rest."

#: AppGUI/ObjectUI.py:1021 AppGUI/ObjectUI.py:1920
#: AppGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:82
msgid "Re-cut"
msgstr "Re-tăiere"

#: AppGUI/ObjectUI.py:1023 AppGUI/ObjectUI.py:1036 AppGUI/ObjectUI.py:1922
#: AppGUI/ObjectUI.py:1934
#: AppGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:84
#: AppGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:96
msgid ""
"In order to remove possible\n"
"copper leftovers where first cut\n"
"meet with last cut, we generate an\n"
"extended cut over the first cut section."
msgstr ""
"Bifează daca se dorește o siguranţă ca resturile de cupru\n"
"care pot ramane acolo unde se intalneste inceputul taierii\n"
"cu sfârşitul acesteia (este vorba de un contur), sunt eliminate\n"
"prin taierea peste acest punct."

#: AppGUI/ObjectUI.py:1049 AppGUI/ObjectUI.py:1943
#: AppGUI/preferences/geometry/GeometryOptPrefGroupUI.py:216
#: AppObjects/FlatCAMExcellon.py:1412 AppObjects/FlatCAMGeometry.py:1676
msgid "Spindle speed"
msgstr "Viteza motor"

#: AppGUI/ObjectUI.py:1051
#: AppGUI/preferences/excellon/ExcellonOptPrefGroupUI.py:224
msgid ""
"Speed of the spindle\n"
"in RPM (optional)"
msgstr ""
"Viteza cu care se roteste motorul ('Spindle').\n"
"In RPM (rotatii pe minut).\n"
"Acest parametru este optional și se poate lasa gol\n"
"daca nu se foloseşte."

#: AppGUI/ObjectUI.py:1066 AppGUI/ObjectUI.py:1962
#: AppGUI/preferences/excellon/ExcellonOptPrefGroupUI.py:238
#: AppGUI/preferences/geometry/GeometryOptPrefGroupUI.py:234
msgid ""
"Pause to allow the spindle to reach its\n"
"speed before cutting."
msgstr ""
"O pauza care permite motorului să ajunga la turatia specificata,\n"
"inainte de a incepe mișcarea spre poziţia de tăiere (găurire)."

#: AppGUI/ObjectUI.py:1077 AppGUI/ObjectUI.py:1972
#: AppGUI/preferences/excellon/ExcellonOptPrefGroupUI.py:246
#: AppGUI/preferences/geometry/GeometryOptPrefGroupUI.py:239
msgid "Number of time units for spindle to dwell."
msgstr "Timpul (ori secunde ori milisec) cat se stă in pauză."

#: AppGUI/ObjectUI.py:1087
#: AppGUI/preferences/excellon/ExcellonAdvOptPrefGroupUI.py:46
msgid "Offset Z"
msgstr "Ofset Z"

#: AppGUI/ObjectUI.py:1089
#: AppGUI/preferences/excellon/ExcellonAdvOptPrefGroupUI.py:48
msgid ""
"Some drill bits (the larger ones) need to drill deeper\n"
"to create the desired exit hole diameter due of the tip shape.\n"
"The value here can compensate the Cut Z parameter."
msgstr ""
"Unele burghie (in special cele cu diametru mai mare)\n"
"au nevoie să găurească mai adanc pentru a depăși conul\n"
"din vârful burghiului astfel încât diametrul găurii de ieșire\n"
"să fie cel dorit.\n"
"Valoarea de aici efectuează o compensare asupra\n"
"parametrului >Z tăiere<."

#: AppGUI/ObjectUI.py:1149 AppGUI/ObjectUI.py:2026 AppTools/ToolNCC.py:492
#: AppTools/ToolPaint.py:422
msgid "Apply parameters to all tools"
msgstr "Aplicați parametrii la toate Uneltele"

#: AppGUI/ObjectUI.py:1151 AppGUI/ObjectUI.py:2028 AppTools/ToolNCC.py:494
#: AppTools/ToolPaint.py:424
msgid ""
"The parameters in the current form will be applied\n"
"on all the tools from the Tool Table."
msgstr ""
"Parametrii din formularul curent vor fi aplicați\n"
"la toate Uneltele din Tabelul Unelte."

#: AppGUI/ObjectUI.py:1162 AppGUI/ObjectUI.py:2039 AppTools/ToolNCC.py:505
#: AppTools/ToolPaint.py:435
msgid "Common Parameters"
msgstr "Parametrii Comuni"

#: AppGUI/ObjectUI.py:1164 AppGUI/ObjectUI.py:2041 AppTools/ToolNCC.py:507
#: AppTools/ToolPaint.py:437
msgid "Parameters that are common for all tools."
msgstr "Parametrii care sunt comuni pentru toate uneltele."

#: AppGUI/ObjectUI.py:1169 AppGUI/ObjectUI.py:2046
msgid "Tool change Z"
msgstr "Z schimb unealtă"

#: AppGUI/ObjectUI.py:1171
#: AppGUI/preferences/excellon/ExcellonOptPrefGroupUI.py:154
msgid ""
"Include tool-change sequence\n"
"in G-Code (Pause for tool change)."
msgstr ""
"Include o secventa de schimbare unealtă\n"
"in codul G-Code (pauza pentru schimbare unealtă).\n"
"De obicei este folosita comanda G-Code M6."

#: AppGUI/ObjectUI.py:1178 AppGUI/ObjectUI.py:2057
#: AppGUI/preferences/excellon/ExcellonOptPrefGroupUI.py:162
#: AppGUI/preferences/geometry/GeometryOptPrefGroupUI.py:134
msgid ""
"Z-axis position (height) for\n"
"tool change."
msgstr "Înălţimea, pe axa Z,  pentru schimbul uneltei."

#: AppGUI/ObjectUI.py:1195
#: AppGUI/preferences/excellon/ExcellonAdvOptPrefGroupUI.py:71
msgid ""
"Height of the tool just after start.\n"
"Delete the value if you don't need this feature."
msgstr ""
"Înălţimea uneltei imediat dupa ce se porneste operatia CNC.\n"
"Lasa casuta goala daca nu se foloseşte."

#: AppGUI/ObjectUI.py:1204 AppGUI/ObjectUI.py:2085
#: AppGUI/preferences/excellon/ExcellonOptPrefGroupUI.py:178
#: AppGUI/preferences/geometry/GeometryOptPrefGroupUI.py:153
msgid "End move Z"
msgstr "Z oprire"

#: AppGUI/ObjectUI.py:1206 AppGUI/ObjectUI.py:2087
#: AppGUI/preferences/excellon/ExcellonOptPrefGroupUI.py:180
#: AppGUI/preferences/geometry/GeometryOptPrefGroupUI.py:155
msgid ""
"Height of the tool after\n"
"the last move at the end of the job."
msgstr "Înălţimea la care se parchează freza dupa ce se termina lucrul."

#: AppGUI/ObjectUI.py:1223 AppGUI/ObjectUI.py:2104
#: AppGUI/preferences/excellon/ExcellonOptPrefGroupUI.py:195
#: AppGUI/preferences/geometry/GeometryOptPrefGroupUI.py:173
msgid "End move X,Y"
msgstr "X-Y Ultima miscare"

#: AppGUI/ObjectUI.py:1225 AppGUI/ObjectUI.py:2106
#: AppGUI/preferences/excellon/ExcellonOptPrefGroupUI.py:197
#: AppGUI/preferences/geometry/GeometryOptPrefGroupUI.py:175
msgid ""
"End move X,Y position. In format (x,y).\n"
"If no value is entered then there is no move\n"
"on X,Y plane at the end of the job."
msgstr ""
"Pozitia X-Y pt ultima miscare. In format (x,y).\n"
"Dacă nici-o valoare nu este introdusă atunci nici-o miscare nu va fi\n"
"efectuată la final."

#: AppGUI/ObjectUI.py:1235 AppGUI/ObjectUI.py:1980
#: AppGUI/preferences/excellon/ExcellonAdvOptPrefGroupUI.py:96
#: AppGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:105
msgid "Probe Z depth"
msgstr "Z sonda"

#: AppGUI/ObjectUI.py:1237 AppGUI/ObjectUI.py:1982
#: AppGUI/preferences/excellon/ExcellonAdvOptPrefGroupUI.py:98
#: AppGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:107
msgid ""
"The maximum depth that the probe is allowed\n"
"to probe. Negative value, in current units."
msgstr ""
"Adâncimea maxima la care este permis sondei să coboare.\n"
"Are o valoare negativă, in unitatile curente."

#: AppGUI/ObjectUI.py:1254 AppGUI/ObjectUI.py:1997
#: AppGUI/preferences/excellon/ExcellonAdvOptPrefGroupUI.py:109
#: AppGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:120
msgid "Feedrate Probe"
msgstr "Feedrate sonda"

#: AppGUI/ObjectUI.py:1256 AppGUI/ObjectUI.py:1999
#: AppGUI/preferences/excellon/ExcellonAdvOptPrefGroupUI.py:111
#: AppGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:122
msgid "The feedrate used while the probe is probing."
msgstr "Viteza sondei când aceasta coboara."

#: AppGUI/ObjectUI.py:1272
msgid "Preprocessor E"
msgstr "Postprocesor E"

#: AppGUI/ObjectUI.py:1274
msgid ""
"The preprocessor JSON file that dictates\n"
"Gcode output for Excellon Objects."
msgstr ""
"Fișierul JSON postprocesor care dictează\n"
"codul Gcode pentru obiectele Excellon."

#: AppGUI/ObjectUI.py:1284
msgid "Preprocessor G"
msgstr "Postprocesor G"

#: AppGUI/ObjectUI.py:1286
msgid ""
"The preprocessor JSON file that dictates\n"
"Gcode output for Geometry (Milling) Objects."
msgstr ""
"Fișierul JSON postprocesor care dictează\n"
"codul Gcode pentru obiectele Geometrie (cand se frezează)."

#: AppGUI/ObjectUI.py:1300 AppGUI/ObjectUI.py:2134
#, fuzzy
#| msgid "Exclusion areas"
msgid "Add exclusion areas"
msgstr "Zone de Excludere"

#: AppGUI/ObjectUI.py:1303 AppGUI/ObjectUI.py:2137
#: AppGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:204
msgid ""
"Include exclusion areas.\n"
"In those areas the travel of the tools\n"
"is forbidden."
msgstr ""
"Includeți zone de excludere.\n"
"În acele zone deplasarea uneltelor\n"
"este interzisă."

#: AppGUI/ObjectUI.py:1324 AppGUI/ObjectUI.py:1343 AppGUI/ObjectUI.py:2158
#: AppGUI/ObjectUI.py:2177
#: AppGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:224
msgid "Strategy"
msgstr "Strategie"

#: AppGUI/ObjectUI.py:1324 AppGUI/ObjectUI.py:1355 AppGUI/ObjectUI.py:2158
#: AppGUI/ObjectUI.py:2189
#: AppGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:236
msgid "Over Z"
msgstr "Peste Z"

#: AppGUI/ObjectUI.py:1326 AppGUI/ObjectUI.py:2160
msgid "This is the Area ID."
msgstr ""

#: AppGUI/ObjectUI.py:1328 AppGUI/ObjectUI.py:2162
msgid "Type of the object where the exclusion area was added."
msgstr ""

#: AppGUI/ObjectUI.py:1330 AppGUI/ObjectUI.py:2164
msgid ""
"The strategy used for exclusion area. Go around the exclusion areas or over "
"it."
msgstr ""

#: AppGUI/ObjectUI.py:1332 AppGUI/ObjectUI.py:2166
msgid ""
"If the strategy is to go over the area then this is the height at which the "
"tool will go to avoid the exclusion area."
msgstr ""

#: AppGUI/ObjectUI.py:1344 AppGUI/ObjectUI.py:2178
#: AppGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:225
msgid ""
"The strategy followed when encountering an exclusion area.\n"
"Can be:\n"
"- Over -> when encountering the area, the tool will go to a set height\n"
"- Around -> will avoid the exclusion area by going around the area"
msgstr ""
"Strategia urmată atunci când întâlnești o zonă de excludere.\n"
"Poate fi:\n"
"- Peste -> când întâlniți zona, instrumentul va merge la o înălțime setată\n"
"- În jur -> va evita zona de excludere ocolind zona"

#: AppGUI/ObjectUI.py:1348 AppGUI/ObjectUI.py:2182
#: AppGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:229
msgid "Over"
msgstr "Peste"

#: AppGUI/ObjectUI.py:1349 AppGUI/ObjectUI.py:2183
#: AppGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:230
msgid "Around"
msgstr "Inconjurare"

#: AppGUI/ObjectUI.py:1356 AppGUI/ObjectUI.py:2190
#: AppGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:237
msgid ""
"The height Z to which the tool will rise in order to avoid\n"
"an interdiction area."
msgstr ""
"Înălțimea Z până la care unealta se va ridica pentru a evita\n"
"o zonă de interdicție."

#: AppGUI/ObjectUI.py:1366 AppGUI/ObjectUI.py:2200
#, fuzzy
#| msgid "Add area"
msgid "Add area:"
msgstr "Adaugă Zonă"

#: AppGUI/ObjectUI.py:1367 AppGUI/ObjectUI.py:2201
msgid "Add an Exclusion Area."
msgstr "Adăugați o zonă de excludere."

#: AppGUI/ObjectUI.py:1373 AppGUI/ObjectUI.py:2207
#: AppGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:214
#: AppGUI/preferences/tools/ToolsNCCPrefGroupUI.py:324
#: AppGUI/preferences/tools/ToolsPaintPrefGroupUI.py:288
#: AppTools/ToolNCC.py:580 AppTools/ToolPaint.py:523
msgid "The kind of selection shape used for area selection."
msgstr "Selectează forma de selectie folosita pentru selectia zonală."

#: AppGUI/ObjectUI.py:1383 AppGUI/ObjectUI.py:2217
#: AppGUI/preferences/utilities/AutoCompletePrefGroupUI.py:32
#: AppGUI/preferences/utilities/FAExcPrefGroupUI.py:42
#: AppGUI/preferences/utilities/FAGcoPrefGroupUI.py:32
#: AppGUI/preferences/utilities/FAGrbPrefGroupUI.py:32
msgid "Delete All"
msgstr "Sterge tot"

#: AppGUI/ObjectUI.py:1384 AppGUI/ObjectUI.py:2218
msgid "Delete all exclusion areas."
msgstr ""
"Ștergeți toate zonele de excludere.Ștergeți toate extensiile din listă."

#: AppGUI/ObjectUI.py:1387 AppGUI/ObjectUI.py:2221
#, fuzzy
#| msgid "Delete Object"
msgid "Delete Selected"
msgstr "Șterge Obiectul"

#: AppGUI/ObjectUI.py:1388 AppGUI/ObjectUI.py:2222
#, fuzzy
#| msgid "Delete all exclusion areas."
msgid "Delete all exclusion areas that are selected in the table."
msgstr ""
"Ștergeți toate zonele de excludere.Ștergeți toate extensiile din listă."

#: AppGUI/ObjectUI.py:1412 AppGUI/ObjectUI.py:2238
msgid ""
"Add / Select at least one tool in the tool-table.\n"
"Click the # header to select all, or Ctrl + LMB\n"
"for custom selection of tools."
msgstr ""
"Adaugă/selectează cel puțin o unealtă in Tabela de Unelte.\n"
"Click pe header coloana # pentru selectarea a toate sau CTRL + LMB click\n"
"pentru o selecţie personalizată de unelte."

#: AppGUI/ObjectUI.py:1420 AppGUI/ObjectUI.py:2245
msgid "Generate CNCJob object"
msgstr "Generează un obiect CNCJob"

#: AppGUI/ObjectUI.py:1422
msgid ""
"Generate the CNC Job.\n"
"If milling then an additional Geometry object will be created"
msgstr ""
"Generează obiectul CNCJob.\n"
"Dacă se frezează atunci va fi creat un obiect Geometrie additional"

#: AppGUI/ObjectUI.py:1439
msgid "Milling Geometry"
msgstr "Geometrie Frezare"

#: AppGUI/ObjectUI.py:1441
msgid ""
"Create Geometry for milling holes.\n"
"Select from the Tools Table above the hole dias to be\n"
"milled. Use the # column to make the selection."
msgstr ""
"Creați Geometrie pentru frezare de găuri.\n"
"Selectați din tabelul Unelte de deasupra găurile\n"
"care trebuie frezate. Utilizați coloana # pentru a face selecția."

#: AppGUI/ObjectUI.py:1449
#: AppGUI/preferences/excellon/ExcellonOptPrefGroupUI.py:296
#: AppGUI/preferences/gerber/GerberOptPrefGroupUI.py:45
msgid "Diameter of the cutting tool."
msgstr "Diametrul uneltei taietoare."

#: AppGUI/ObjectUI.py:1459
msgid "Mill Drills"
msgstr "Frezare Găuri"

#: AppGUI/ObjectUI.py:1461
msgid ""
"Create the Geometry Object\n"
"for milling DRILLS toolpaths."
msgstr ""
"Crează un obiect tip Geometrie pt.\n"
"frezarea rutelor create din Găuri."

#: AppGUI/ObjectUI.py:1479
msgid "Mill Slots"
msgstr "Frezare Sloturi"

#: AppGUI/ObjectUI.py:1481
msgid ""
"Create the Geometry Object\n"
"for milling SLOTS toolpaths."
msgstr ""
"Crează un obiect tip Geometrie pt.\n"
"frezarea rutelor create din Sloturi."

#: AppGUI/ObjectUI.py:1523 AppTools/ToolCutOut.py:319
msgid "Geometry Object"
msgstr "Obiect Geometrie"

#: AppGUI/ObjectUI.py:1569
msgid ""
"Tools in this Geometry object used for cutting.\n"
"The 'Offset' entry will set an offset for the cut.\n"
"'Offset' can be inside, outside, on path (none) and custom.\n"
"'Type' entry is only informative and it allow to know the \n"
"intent of using the current tool. \n"
"It can be Rough(ing), Finish(ing) or Iso(lation).\n"
"The 'Tool type'(TT) can be circular with 1 to 4 teeths(C1..C4),\n"
"ball(B), or V-Shaped(V). \n"
"When V-shaped is selected the 'Type' entry is automatically \n"
"set to Isolation, the CutZ parameter in the UI form is\n"
"grayed out and Cut Z is automatically calculated from the newly \n"
"showed UI form entries named V-Tip Dia and V-Tip Angle."
msgstr ""
"Uneltele din acest obiect Geometrie folosit pentru tăiere.\n"
"Intrarea >Ofset< va seta un ofset pentru tăiere.\n"
"Acesta poate fi Inauntru, In afară, Pe cale și Personalizat.\n"
"Intrarea >Tip< este doar informativa și permite să stim intenția\n"
"pentru care folosim unealta aleasă.\n"
"Poate să fie Grosier, Finisare și Izolaţie.\n"
"Intrarea >Tip unealta< (TU) poate fi: Circular (cu unul sau mai\n"
"multi dinti C1 ...C4), rotunda (B) sau cu vârf V-Shape (V).\n"
"\n"
"Când V-shape este selectat atunci și >Tip< este automat setat \n"
"in 'Izolare', prametrul >Z tăiere< din UI este dezactivat (gri) pt că\n"
"este acum calculat automat din doi noi parametri care sunt afisati:\n"
"- V-Dia \n"
"- V-unghi."

#: AppGUI/ObjectUI.py:1586 AppGUI/ObjectUI.py:2443
#: AppGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:40
msgid "Plot Object"
msgstr "Afisează"

#: AppGUI/ObjectUI.py:1599 AppGUI/ObjectUI.py:2456 AppGUI/ObjectUI.py:2466
#: AppGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:138
#: AppTools/ToolCopperThieving.py:221
msgid "Dia"
msgstr "Dia"

#: AppGUI/ObjectUI.py:1599 AppGUI/ObjectUI.py:2456 AppTools/ToolNCC.py:132
#: AppTools/ToolPaint.py:127
msgid "TT"
msgstr "TU"

#: AppGUI/ObjectUI.py:1606
msgid ""
"This is the Tool Number.\n"
"When ToolChange is checked, on toolchange event this value\n"
"will be showed as a T1, T2 ... Tn"
msgstr ""
"Acesta este numărul uneltei.\n"
"Când se foloseşte optiunea de pauza pt schimb unealtă,\n"
"la evenim. de schimb unealtă, va aparea sub forma T1, T2, etc\n"
"in codul masina CNC"

#: AppGUI/ObjectUI.py:1617
msgid ""
"The value for the Offset can be:\n"
"- Path -> There is no offset, the tool cut will be done through the geometry "
"line.\n"
"- In(side) -> The tool cut will follow the geometry inside. It will create a "
"'pocket'.\n"
"- Out(side) -> The tool cut will follow the geometry line on the outside."
msgstr ""
"Valorile pt Ofset pot fi:\n"
"- Pe cale -> Ofsetul este zero, tăietura va fi efectuatat pe linia "
"geometrică\n"
"- În(ăuntru) -> Tăietura va urma geometria pe interior. Va crea un "
"'buzunar'\n"
"- Afară-> Tăietura va urma geometria pe exterior."

#: AppGUI/ObjectUI.py:1624
msgid ""
"The (Operation) Type has only informative value. Usually the UI form "
"values \n"
"are choose based on the operation type and this will serve as a reminder.\n"
"Can be 'Roughing', 'Finishing' or 'Isolation'.\n"
"For Roughing we may choose a lower Feedrate and multiDepth cut.\n"
"For Finishing we may choose a higher Feedrate, without multiDepth.\n"
"For Isolation we need a lower Feedrate as it use a milling bit with a fine "
"tip."
msgstr ""
"Tipul (operaţiei efectuate cu unealta) are doar o valoare informativa. De "
"obicei\n"
"valorile din UI sunt alese bazate pe tipul operaţiei și acesta ne serveste "
"ca și\n"
"notificare. Poate să fie: Grosier, Finisare sau Izolare.\n"
"Grosier -> putem alege de ex un feedrate scazut și tăiere in mai multe "
"etape.\n"
"Finisare -> alegem un feedrate mai mare și tăiere dintr-o singură operaţie\n"
"Izolare -> avem nevoie de un feedrate scazut pt ca se foloseşte o freza cu "
"un\n"
"vârf fin, ascuțit."

#: AppGUI/ObjectUI.py:1633
msgid ""
"The Tool Type (TT) can be:\n"
"- Circular with 1 ... 4 teeth -> it is informative only. Being circular the "
"cut width in material\n"
"is exactly the tool diameter.\n"
"- Ball -> informative only and make reference to the Ball type endmill.\n"
"- V-Shape -> it will disable Z-Cut parameter in the UI form and enable two "
"additional UI form\n"
"fields: V-Tip Dia and V-Tip Angle. Adjusting those two values will adjust "
"the Z-Cut parameter such\n"
"as the cut width into material will be equal with the value in the Tool "
"Diameter column of this table.\n"
"Choosing the V-Shape Tool Type automatically will select the Operation Type "
"as Isolation."
msgstr ""
"Tipul Uneltei (TU) poate fi:\n"
"- Circular cu 1 ... 4 dinti -> are aspect informativ. Lăţimea de tăiere este "
"exact diametrul uneltei.\n"
"- Rotund (ball) -> val. informativa și face referinţă la tipul de freza "
"Ball\n"
"- V-Shape -> produce modificari in UI. Va dezactiva parametrul >Z tăiere< "
"deoarece acesta va fi\n"
"calculat automat din valorile >V-dia< și >V-unghi, parametri care sunt acum "
"afisati in UI, cat și din\n"
"lăţimea de tăiere in material care este de fapt valoarea diametrului "
"uneltei.\n"
"Alegerea tipului V-Shape (forma in V) va selecta automat Tipul de Operaţie "
"ca Izolare."

#: AppGUI/ObjectUI.py:1645
msgid ""
"Plot column. It is visible only for MultiGeo geometries, meaning geometries "
"that holds the geometry\n"
"data into the tools. For those geometries, deleting the tool will delete the "
"geometry data also,\n"
"so be WARNED. From the checkboxes on each row it can be enabled/disabled the "
"plot on canvas\n"
"for the corresponding tool."
msgstr ""
"Coloana de afișare. Este vizibila doar pentru obiecte Geometrie de tip "
"MultiGeo, ceea ce inseamna că\n"
"obiectul stochează datele geometrice in variabilele unelte. \n"
"\n"
"ATENTIE: Pentru aceste obiecte, ștergerea unei unelte conduce automat și la "
"ștergerea \n"
"datelor geometrice asociate. Din checkbox-urile asociate, fiecarei unelte i "
"se poate activa/dezactiva\n"
"afișarea in canvas."

#: AppGUI/ObjectUI.py:1663
msgid ""
"The value to offset the cut when \n"
"the Offset type selected is 'Offset'.\n"
"The value can be positive for 'outside'\n"
"cut and negative for 'inside' cut."
msgstr ""
"Valoarea cu care se face ofset când tipul de ofset selectat\n"
"este >Ofset<. Aceasta valoare poate fi pozitivă pentru un ofset\n"
"in exterior sau poate fi negativă pentru un ofset in interior."

#: AppGUI/ObjectUI.py:1682 AppTools/ToolNCC.py:209 AppTools/ToolNCC.py:923
#: AppTools/ToolPaint.py:191 AppTools/ToolPaint.py:848
#: AppTools/ToolSolderPaste.py:559
msgid "New Tool"
msgstr "O Noua Unealtă"

#: AppGUI/ObjectUI.py:1699
msgid ""
"Add a new tool to the Tool Table\n"
"with the specified diameter."
msgstr ""
"Adăugați o Unealta noua in Tabelul de Unelte\n"
"cu diametrul specificat."

#: AppGUI/ObjectUI.py:1704 AppTools/ToolNCC.py:300 AppTools/ToolNCC.py:634
#: AppTools/ToolPaint.py:282 AppTools/ToolPaint.py:678
msgid "Add from DB"
msgstr "Adaugă Unealtă din DB"

#: AppGUI/ObjectUI.py:1706 AppTools/ToolNCC.py:302 AppTools/ToolPaint.py:284
msgid ""
"Add a new tool to the Tool Table\n"
"from the Tool DataBase."
msgstr ""
"Adaugă o noua unealta in Tabela de Unelte,\n"
"din DB Unelte."

#: AppGUI/ObjectUI.py:1721
msgid ""
"Copy a selection of tools in the Tool Table\n"
"by first selecting a row in the Tool Table."
msgstr ""
"Copiază o selecţie de unelte in Tabela de Unelte prin\n"
"selectarea unei linii (sau mai multe) in Tabela de Unelte."

#: AppGUI/ObjectUI.py:1727
msgid ""
"Delete a selection of tools in the Tool Table\n"
"by first selecting a row in the Tool Table."
msgstr ""
"Șterge o selecţie de unelte in Tabela de Unelte prin\n"
"selectarea unei linii (sau mai multe) in Tabela de Unelte."

#: AppGUI/ObjectUI.py:1854
#: AppGUI/preferences/geometry/GeometryOptPrefGroupUI.py:103
msgid ""
"Height of the tool when\n"
"moving without cutting."
msgstr ""
"Înălţimea la care se misca unealta când nu taie,\n"
"deasupra materialului."

#: AppGUI/ObjectUI.py:1887
#: AppGUI/preferences/geometry/GeometryOptPrefGroupUI.py:202
msgid ""
"Cutting speed in the XY\n"
"plane in units per minute.\n"
"It is called also Plunge."
msgstr ""
"Viteza de tăiere in planul Z\n"
"in unitati pe minut.\n"
"Mai este numita și viteza de plonjare."

#: AppGUI/ObjectUI.py:1902
#: AppGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:66
msgid ""
"Cutting speed in the XY plane\n"
"(in units per minute).\n"
"This is for the rapid move G00.\n"
"It is useful only for Marlin,\n"
"ignore for any other cases."
msgstr ""
"Viteza de tăiere in planul X-Y, in unitati pe minut,\n"
"in legatura cu comanda G00.\n"
"Este utila doar când se foloseşte cu un printer 3D Marlin,\n"
"pentru toate celelalte cazuri ignora acest parametru."

#: AppGUI/ObjectUI.py:1946
#: AppGUI/preferences/geometry/GeometryOptPrefGroupUI.py:219
msgid ""
"Speed of the spindle in RPM (optional).\n"
"If LASER preprocessor is used,\n"
"this value is the power of laser."
msgstr ""
"Viteza motorului in RPM (optional).\n"
"Daca postprocesorul Laser este folosit,\n"
"valoarea să este puterea laserului."

#: AppGUI/ObjectUI.py:2049
#: AppGUI/preferences/geometry/GeometryOptPrefGroupUI.py:124
msgid ""
"Include tool-change sequence\n"
"in the Machine Code (Pause for tool change)."
msgstr ""
"Include o secventa de schimb unealtă in \n"
"codul masina CNC. O pauza pentru schimbul\n"
"uneltei (M6)."

#: AppGUI/ObjectUI.py:2118
#: AppGUI/preferences/geometry/GeometryOptPrefGroupUI.py:256
msgid ""
"The Preprocessor file that dictates\n"
"the Machine Code (like GCode, RML, HPGL) output."
msgstr ""
"Fişierul postprocesor care controlează generarea\n"
"codului masina CNC (GCode, RML, HPGL) care \n"
"mai apoi este salvat."

#: AppGUI/ObjectUI.py:2247 Common.py:405 Common.py:520 Common.py:573
msgid "Generate the CNC Job object."
msgstr "Generează un obiect CNCJob."

#: AppGUI/ObjectUI.py:2264
msgid "Launch Paint Tool in Tools Tab."
msgstr ""
"Lansează unealta FlatCAM numita Paint și\n"
"o instalează in Tab-ul Unealta."

#: AppGUI/ObjectUI.py:2272 AppGUI/preferences/tools/ToolsPaintPrefGroupUI.py:35
msgid ""
"Creates tool paths to cover the\n"
"whole area of a polygon (remove\n"
"all copper). You will be asked\n"
"to click on the desired polygon."
msgstr ""
"Crează treceri taietoare pentru a acoperi\n"
"intreaga arie a unui poligon (pentru a indeparta\n"
"to cuprul, spre ex.). Când se actionează peste un\n"
"singur poligon se va cere să faceti click pe poligonul\n"
"dorit."

#: AppGUI/ObjectUI.py:2327
msgid "CNC Job Object"
msgstr "Obiect CNCJob"

#: AppGUI/ObjectUI.py:2338 AppGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:45
msgid "Plot kind"
msgstr "Tip afișare"

#: AppGUI/ObjectUI.py:2341 AppGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:47
msgid ""
"This selects the kind of geometries on the canvas to plot.\n"
"Those can be either of type 'Travel' which means the moves\n"
"above the work piece or it can be of type 'Cut',\n"
"which means the moves that cut into the material."
msgstr ""
"Aici se poate selecta tipul de afișare a geometriilor.\n"
"Acestea pot fi:\n"
"- Voiaj -> miscarile deasupra materialului\n"
"- Tăiere -> miscarile in material, tăiere."

#: AppGUI/ObjectUI.py:2350 AppGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:55
msgid "Travel"
msgstr "Voiaj"

#: AppGUI/ObjectUI.py:2354 AppGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:64
msgid "Display Annotation"
msgstr "Afişează notații"

#: AppGUI/ObjectUI.py:2356 AppGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:66
msgid ""
"This selects if to display text annotation on the plot.\n"
"When checked it will display numbers in order for each end\n"
"of a travel line."
msgstr ""
"Aici se poate seta daca sa se afiseze notatiile text.\n"
"Cand este selectat va afisa numerele in ordine pt fiecare\n"
"capat al liniilor de traversare."

#: AppGUI/ObjectUI.py:2371
msgid "Travelled dist."
msgstr "Dist. parcursă"

#: AppGUI/ObjectUI.py:2373 AppGUI/ObjectUI.py:2378
msgid ""
"This is the total travelled distance on X-Y plane.\n"
"In current units."
msgstr ""
"Aceasta este distanţa totala parcursa in planul X-Y.\n"
"In unitatile curente."

#: AppGUI/ObjectUI.py:2383
msgid "Estimated time"
msgstr "Durată estimată"

#: AppGUI/ObjectUI.py:2385 AppGUI/ObjectUI.py:2390
msgid ""
"This is the estimated time to do the routing/drilling,\n"
"without the time spent in ToolChange events."
msgstr ""
"Acesta este timpul estimat pentru efectuarea traseului / găuririi,\n"
"fără timpul petrecut în evenimentele ToolChange."

#: AppGUI/ObjectUI.py:2425
msgid "CNC Tools Table"
msgstr "Tabela Unelte CNC"

#: AppGUI/ObjectUI.py:2428
msgid ""
"Tools in this CNCJob object used for cutting.\n"
"The tool diameter is used for plotting on canvas.\n"
"The 'Offset' entry will set an offset for the cut.\n"
"'Offset' can be inside, outside, on path (none) and custom.\n"
"'Type' entry is only informative and it allow to know the \n"
"intent of using the current tool. \n"
"It can be Rough(ing), Finish(ing) or Iso(lation).\n"
"The 'Tool type'(TT) can be circular with 1 to 4 teeths(C1..C4),\n"
"ball(B), or V-Shaped(V)."
msgstr ""
"Unelete folosite in acest obiect CNCJob pentru tăiere.\n"
"Diametrul uneltei este folosit pentru afișarea pe canvas.\n"
"Coloanele sunt:\n"
"- 'Ofset' -> poate fi in interior, in exterior, pe cale sau personalizat.\n"
"- 'Tipul' -> este doar informativ și poate fi: Grosier, Finisaj, Izolaţie\n"
"- 'Tipul uneltei' -> poate fi circular cu 1 ... 4 dinti, tip bila sau V-"
"Shape\n"
"(cu forma in V)."

#: AppGUI/ObjectUI.py:2456 AppGUI/ObjectUI.py:2467
msgid "P"
msgstr "P"

#: AppGUI/ObjectUI.py:2477
msgid "Update Plot"
msgstr "Actualiz. afișare"

#: AppGUI/ObjectUI.py:2479
msgid "Update the plot."
msgstr "Actualizează afișarea obiectelor."

#: AppGUI/ObjectUI.py:2486
#: AppGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:30
msgid "Export CNC Code"
msgstr "Exporta codul masina CNC"

#: AppGUI/ObjectUI.py:2488
#: AppGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:32
#: AppGUI/preferences/cncjob/CNCJobOptPrefGroupUI.py:33
msgid ""
"Export and save G-Code to\n"
"make this object to a file."
msgstr ""
"Exportă și salvează codul G-Code intr-un fişier\n"
"care este salvat pe HDD."

#: AppGUI/ObjectUI.py:2494
msgid "Prepend to CNC Code"
msgstr "Adaugă la inceput in codul G-Code"

#: AppGUI/ObjectUI.py:2496 AppGUI/ObjectUI.py:2503
#: AppGUI/preferences/cncjob/CNCJobOptPrefGroupUI.py:49
msgid ""
"Type here any G-Code commands you would\n"
"like to add at the beginning of the G-Code file."
msgstr ""
"Adaugă aici orice comenzi G-Code care se dorește să fie\n"
"inserate la inceputul codului G-Code."

#: AppGUI/ObjectUI.py:2509
msgid "Append to CNC Code"
msgstr "Adaugă la sfârşit in codul G-Code"

#: AppGUI/ObjectUI.py:2511 AppGUI/ObjectUI.py:2519
#: AppGUI/preferences/cncjob/CNCJobOptPrefGroupUI.py:65
msgid ""
"Type here any G-Code commands you would\n"
"like to append to the generated file.\n"
"I.e.: M2 (End of program)"
msgstr ""
"Adaugă aici orice comenzi G-Code care se dorește să fie\n"
"inserate la sfârşitul codului G-Code."

#: AppGUI/ObjectUI.py:2533
#: AppGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:38
msgid "Toolchange G-Code"
msgstr "G-Code pt schimb unealtă"

#: AppGUI/ObjectUI.py:2536
#: AppGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:41
msgid ""
"Type here any G-Code commands you would\n"
"like to be executed when Toolchange event is encountered.\n"
"This will constitute a Custom Toolchange GCode,\n"
"or a Toolchange Macro.\n"
"The FlatCAM variables are surrounded by '%' symbol.\n"
"\n"
"WARNING: it can be used only with a preprocessor file\n"
"that has 'toolchange_custom' in it's name and this is built\n"
"having as template the 'Toolchange Custom' posprocessor file."
msgstr ""
"Plasează aici acele comenzi G-Code care se dorește să fie executate\n"
"atunci când evenimentul de tip Schimb Unealtă este intalnit.\n"
"Aceasta va constitui un Macro pentru schimbare unealtă.\n"
"Variabilele FlatCAM folosite aici sunt inconjurate de simbolul %.\n"
"\n"
"ATENTIE:\n"
"poate fi folosit doar cu un fişier postprocesor care contine "
"'toolchange_custom'\n"
"in numele sau."

#: AppGUI/ObjectUI.py:2551
msgid ""
"Type here any G-Code commands you would\n"
"like to be executed when Toolchange event is encountered.\n"
"This will constitute a Custom Toolchange GCode,\n"
"or a Toolchange Macro.\n"
"The FlatCAM variables are surrounded by '%' symbol.\n"
"WARNING: it can be used only with a preprocessor file\n"
"that has 'toolchange_custom' in it's name."
msgstr ""
"Plasează aici acele comenzi G-Code care se dorește să fie executate\n"
"atunci când evenimentul de tip Schimb Unealtă este intalnit.\n"
"Aceasta va constitui un Macro pentru schimbare unealtă.\n"
"Variabilele FlatCAM folosite aici sunt inconjurate de simbolul %.\n"
"ATENTIE:\n"
"Poate fi folosit doar cu un fişier pretprocesor care contine "
"'toolchange_custom'\n"
"in numele sau."

#: AppGUI/ObjectUI.py:2566
#: AppGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:80
msgid "Use Toolchange Macro"
msgstr "Fol. Macro schimb unealtă"

#: AppGUI/ObjectUI.py:2568
#: AppGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:82
msgid ""
"Check this box if you want to use\n"
"a Custom Toolchange GCode (macro)."
msgstr ""
"Bifează aici daca dorești să folosești Macro pentru\n"
"schimb unelte."

#: AppGUI/ObjectUI.py:2576
#: AppGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:94
msgid ""
"A list of the FlatCAM variables that can be used\n"
"in the Toolchange event.\n"
"They have to be surrounded by the '%' symbol"
msgstr ""
"O lista de variabile FlatCAM care se pot folosi in evenimentul \n"
"de schimb al uneltei (când se intalneste comanda M6).\n"
"Este necesar să fie inconjurate de simbolul '%'"

#: AppGUI/ObjectUI.py:2583
#: AppGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:101
#: AppGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:30
#: AppGUI/preferences/geometry/GeometryEditorPrefGroupUI.py:31
#: AppGUI/preferences/gerber/GerberEditorPrefGroupUI.py:31
#: AppGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:37
#: AppGUI/preferences/tools/Tools2CalPrefGroupUI.py:36
#: AppGUI/preferences/tools/Tools2EDrillsPrefGroupUI.py:36
#: AppGUI/preferences/tools/Tools2FiducialsPrefGroupUI.py:36
#: AppGUI/preferences/tools/Tools2InvertPrefGroupUI.py:31
#: AppGUI/preferences/tools/Tools2OptimalPrefGroupUI.py:31
#: AppGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:36
#: AppGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:31
#: AppGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:30
#: AppGUI/preferences/tools/Tools2sidedPrefGroupUI.py:31
#: AppGUI/preferences/tools/ToolsCornersPrefGroupUI.py:35
#: AppGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:32
#: AppGUI/preferences/tools/ToolsFilmPrefGroupUI.py:31
#: AppGUI/preferences/tools/ToolsNCCPrefGroupUI.py:31
#: AppGUI/preferences/tools/ToolsPanelizePrefGroupUI.py:31
#: AppGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:31
#: AppGUI/preferences/tools/ToolsSubPrefGroupUI.py:31
#: AppGUI/preferences/tools/ToolsTransformPrefGroupUI.py:31
#: AppTools/ToolCopperThieving.py:89 AppTools/ToolCorners.py:106
#: AppTools/ToolFiducials.py:149 AppTools/ToolInvertGerber.py:82
msgid "Parameters"
msgstr "Parametri"

#: AppGUI/ObjectUI.py:2586
#: AppGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:106
msgid "FlatCAM CNC parameters"
msgstr "Parametri FlatCAM CNC"

#: AppGUI/ObjectUI.py:2587
#: AppGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:111
msgid "tool number"
msgstr "numărul uneltei"

#: AppGUI/ObjectUI.py:2588
#: AppGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:112
msgid "tool diameter"
msgstr "diametrul sculei"

#: AppGUI/ObjectUI.py:2589
#: AppGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:113
msgid "for Excellon, total number of drills"
msgstr "pentru Excellon, numărul total de operațiuni găurire"

#: AppGUI/ObjectUI.py:2591
#: AppGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:115
msgid "X coord for Toolchange"
msgstr "Coordonata X pentru schimbarea uneltei"

#: AppGUI/ObjectUI.py:2592
#: AppGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:116
msgid "Y coord for Toolchange"
msgstr "Coordonata Y pentru schimbarea uneltei"

#: AppGUI/ObjectUI.py:2593
#: AppGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:118
msgid "Z coord for Toolchange"
msgstr "Coordonata Z pentru schimbarea uneltei"

#: AppGUI/ObjectUI.py:2594
msgid "depth where to cut"
msgstr "adâncimea de tăiere"

#: AppGUI/ObjectUI.py:2595
msgid "height where to travel"
msgstr "inălţimea deplasare"

#: AppGUI/ObjectUI.py:2596
#: AppGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:121
msgid "the step value for multidepth cut"
msgstr "pasul pentru taierea progresiva"

#: AppGUI/ObjectUI.py:2598
#: AppGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:123
msgid "the value for the spindle speed"
msgstr "valoarea viteza motor"

#: AppGUI/ObjectUI.py:2600
msgid "time to dwell to allow the spindle to reach it's set RPM"
msgstr "durata de asteptare ca motorul să ajunga la turatia setată"

#: AppGUI/ObjectUI.py:2616
msgid "View CNC Code"
msgstr "Vizualiz. codul CNC"

#: AppGUI/ObjectUI.py:2618
msgid ""
"Opens TAB to view/modify/print G-Code\n"
"file."
msgstr ""
"Deschide un nou tab pentru a vizualiza, modifica\n"
"sau tipari codul G-Code."

#: AppGUI/ObjectUI.py:2623
msgid "Save CNC Code"
msgstr "Salvează codul CNC"

#: AppGUI/ObjectUI.py:2625
msgid ""
"Opens dialog to save G-Code\n"
"file."
msgstr ""
"Deshide o fereastra dialog pentru salvarea codului\n"
"G-Code intr-un fişier."

#: AppGUI/ObjectUI.py:2659
msgid "Script Object"
msgstr "Editare Script"

#: AppGUI/ObjectUI.py:2679 AppGUI/ObjectUI.py:2753
msgid "Auto Completer"
msgstr "Autocompletare"

#: AppGUI/ObjectUI.py:2681
msgid "This selects if the auto completer is enabled in the Script Editor."
msgstr ""
"Aceasta selectează dacă completatorul automat este activat în Script Editor."

#: AppGUI/ObjectUI.py:2726
msgid "Document Object"
msgstr "Obiect document"

#: AppGUI/ObjectUI.py:2755
msgid "This selects if the auto completer is enabled in the Document Editor."
msgstr ""
"Aceasta selectează dacă completatorul automat este activat în Editorul de "
"documente."

#: AppGUI/ObjectUI.py:2773
msgid "Font Type"
msgstr "Tipul Font"

#: AppGUI/ObjectUI.py:2790
#: AppGUI/preferences/general/GeneralAPPSetGroupUI.py:197
msgid "Font Size"
msgstr "Dim. Font"

#: AppGUI/ObjectUI.py:2826
msgid "Alignment"
msgstr "Aliniere"

#: AppGUI/ObjectUI.py:2831
msgid "Align Left"
msgstr "Aliniați la stânga"

#: AppGUI/ObjectUI.py:2836 App_Main.py:4937
msgid "Center"
msgstr "Centru"

#: AppGUI/ObjectUI.py:2841
msgid "Align Right"
msgstr "Aliniați la dreapta"

#: AppGUI/ObjectUI.py:2846
msgid "Justify"
msgstr "Aliniere duala"

#: AppGUI/ObjectUI.py:2853
msgid "Font Color"
msgstr "Culoare FOnt"

#: AppGUI/ObjectUI.py:2855
msgid "Set the font color for the selected text"
msgstr "Setați culoarea fontului pentru textul selectat"

#: AppGUI/ObjectUI.py:2869
msgid "Selection Color"
msgstr "Culoare de selecție"

#: AppGUI/ObjectUI.py:2871
msgid "Set the selection color when doing text selection."
msgstr "Setați culoarea de selecție atunci când faceți selecția textului."

#: AppGUI/ObjectUI.py:2885
msgid "Tab Size"
msgstr "Dimens. filei"

#: AppGUI/ObjectUI.py:2887
msgid "Set the tab size. In pixels. Default value is 80 pixels."
msgstr ""
"Setați dimensiunea filei. În pixeli. Valoarea implicită este de 80 pixeli."

#: AppGUI/PlotCanvasLegacy.py:1456
msgid ""
"Could not annotate due of a difference between the number of text elements "
"and the number of text positions."
msgstr ""
"Nu s-a putut adnota datorită unei diferențe între numărul de elemente de "
"text și numărul de locații de text."

#: AppGUI/preferences/PreferencesUIManager.py:911
#: AppGUI/preferences/PreferencesUIManager.py:1002
#: AppGUI/preferences/PreferencesUIManager.py:1026
#: AppGUI/preferences/PreferencesUIManager.py:1132 App_Main.py:5357
msgid "Preferences"
msgstr "Preferințe"

#: AppGUI/preferences/PreferencesUIManager.py:917
msgid "Preferences applied."
msgstr "Preferințele au fost aplicate."

#: AppGUI/preferences/PreferencesUIManager.py:937
#, fuzzy
#| msgid "Are you sure you want to delete the GUI Settings? \n"
msgid "Are you sure you want to continue?"
msgstr "Esti sigur că dorești să ștergi setările GUI?\n"

#: AppGUI/preferences/PreferencesUIManager.py:938
#, fuzzy
#| msgid "Application started ..."
msgid "Application restart"
msgstr "Aplicaţia a pornit ..."

#: AppGUI/preferences/PreferencesUIManager.py:1031
msgid "Preferences closed without saving."
msgstr "Tab-ul Preferințe a fost închis fără a salva."

#: AppGUI/preferences/PreferencesUIManager.py:1043
msgid "Preferences default values are restored."
msgstr "Valorile implicite pt preferințe sunt restabilite."

#: AppGUI/preferences/PreferencesUIManager.py:1075 App_Main.py:2498
#: App_Main.py:2566
msgid "Failed to write defaults to file."
msgstr "Salvarea valorilor default intr-un fişier a eșuat."

#: AppGUI/preferences/PreferencesUIManager.py:1079
#: AppGUI/preferences/PreferencesUIManager.py:1188
msgid "Preferences saved."
msgstr "Preferințele au fost salvate."

#: AppGUI/preferences/PreferencesUIManager.py:1129
msgid "Preferences edited but not saved."
msgstr "Preferințele au fost editate dar nu au fost salvate."

#: AppGUI/preferences/PreferencesUIManager.py:1174
msgid ""
"One or more values are changed.\n"
"Do you want to save the Preferences?"
msgstr ""
"Una sau mai multe valori au fost schimbate.\n"
"Dorești să salvezi Preferințele?"

#: AppGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:27
msgid "CNC Job Adv. Options"
msgstr "Opțiuni Avans. CNCJob"

#: AppGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:64
msgid ""
"Type here any G-Code commands you would like to be executed when Toolchange "
"event is encountered.\n"
"This will constitute a Custom Toolchange GCode, or a Toolchange Macro.\n"
"The FlatCAM variables are surrounded by '%' symbol.\n"
"WARNING: it can be used only with a preprocessor file that has "
"'toolchange_custom' in it's name."
msgstr ""
"Plasează aici acele comenzi G-Code care se dorește să fie executate atunci "
"când evenimentul de tip Schimb Unealtă este intalnit.\n"
"Aceasta va constitui un Macro pentru schimbare unealtă.\n"
"Variabilele FlatCAM folosite aici sunt inconjurate de simbolul %.\n"
"\n"
"ATENTIE:\n"
"poate fi folosit doar cu un fişier postprocesor care contine "
"'toolchange_custom' în nume."

#: AppGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:119
msgid "Z depth for the cut"
msgstr "Z adâncimea de tăiere"

#: AppGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:120
msgid "Z height for travel"
msgstr "Z Înălţimea deplasare"

#: AppGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:126
msgid "dwelltime = time to dwell to allow the spindle to reach it's set RPM"
msgstr "dwelltime = durata de asteptare ca motorul să ajunga la turatia setată"

#: AppGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:145
msgid "Annotation Size"
msgstr "Dim. anotate"

#: AppGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:147
msgid "The font size of the annotation text. In pixels."
msgstr "Dimensiunea fontului pt. textul cu notatii. In pixeli."

#: AppGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:157
msgid "Annotation Color"
msgstr "Culoarea anotatii"

#: AppGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:159
msgid "Set the font color for the annotation texts."
msgstr "Setează culoarea pentru textul cu anotatii."

#: AppGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:26
msgid "CNC Job General"
msgstr "CNCJob General"

#: AppGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:77
#: AppGUI/preferences/geometry/GeometryGenPrefGroupUI.py:47
#: AppGUI/preferences/gerber/GerberGenPrefGroupUI.py:59
#: AppGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:45
msgid "Circle Steps"
msgstr "Pași pt. cerc"

#: AppGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:79
msgid ""
"The number of circle steps for <b>GCode</b> \n"
"circle and arc shapes linear approximation."
msgstr ""
"Numărul de segmente utilizate pentru\n"
"aproximarea lineara a reprezentarilor <b>GCodului</b> circular."

#: AppGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:88
msgid "Travel dia"
msgstr "Dia Deplasare"

#: AppGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:90
msgid ""
"The width of the travel lines to be\n"
"rendered in the plot."
msgstr "Diametrul liniilor de deplasare care să fie redate prin afișare."

#: AppGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:103
msgid "G-code Decimals"
msgstr "Zecimale G-Code"

#: AppGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:106
#: AppTools/ToolFiducials.py:74
msgid "Coordinates"
msgstr "Coordinate"

#: AppGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:108
msgid ""
"The number of decimals to be used for \n"
"the X, Y, Z coordinates in CNC code (GCODE, etc.)"
msgstr ""
"Numărul de zecimale care să fie folosit in \n"
"coordonatele X,Y,Z in codul CNC (GCode etc)."

#: AppGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:119
#: AppTools/ToolProperties.py:519
msgid "Feedrate"
msgstr "Feedrate"

#: AppGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:121
msgid ""
"The number of decimals to be used for \n"
"the Feedrate parameter in CNC code (GCODE, etc.)"
msgstr ""
"Numărul de zecimale care să fie folosit in \n"
"parametrul >Feedrate< in codul CNC (GCode etc)."

#: AppGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:132
msgid "Coordinates type"
msgstr "Tip coordinate"

#: AppGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:134
msgid ""
"The type of coordinates to be used in Gcode.\n"
"Can be:\n"
"- Absolute G90 -> the reference is the origin x=0, y=0\n"
"- Incremental G91 -> the reference is the previous position"
msgstr ""
"Tipul de coordinate care să fie folosite in G-Code.\n"
"Poate fi:\n"
"- Absolut G90 -> referinta este originea x=0, y=0\n"
"- Incrementator G91 -> referinta este pozitia anterioară"

#: AppGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:140
msgid "Absolute G90"
msgstr "Absolut G90"

#: AppGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:141
msgid "Incremental G91"
msgstr "Incrementator G91"

#: AppGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:151
msgid "Force Windows style line-ending"
msgstr "Forțați finalizarea liniei în stil Windows"

#: AppGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:153
msgid ""
"When checked will force a Windows style line-ending\n"
"(\\r\\n) on non-Windows OS's."
msgstr ""
"Când este bifat, va forța o linie de finalizare a stilului Windows\n"
"(\\r \\n) pe sistemele de operare non-Windows."

#: AppGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:165
msgid "Travel Line Color"
msgstr "Culoare Linie Trecere"

#: AppGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:169
#: AppGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:235
#: AppGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:262
#: AppGUI/preferences/general/GeneralGUIPrefGroupUI.py:154
#: AppGUI/preferences/general/GeneralGUIPrefGroupUI.py:220
#: AppGUI/preferences/geometry/GeometryGenPrefGroupUI.py:84
#: AppGUI/preferences/gerber/GerberGenPrefGroupUI.py:153
#: AppTools/ToolRulesCheck.py:186
msgid "Outline"
msgstr "Contur"

#: AppGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:171
msgid "Set the travel line color for plotted objects."
msgstr "Setați culoarea liniei de trecere pentru obiectele trasate."

#: AppGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:186
#: AppGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:252
#: AppGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:279
#: AppGUI/preferences/general/GeneralGUIPrefGroupUI.py:170
#: AppGUI/preferences/general/GeneralGUIPrefGroupUI.py:237
#: AppGUI/preferences/gerber/GerberGenPrefGroupUI.py:170
msgid "Fill"
msgstr "Continut"

#: AppGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:188
#: AppGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:254
#: AppGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:281
#: AppGUI/preferences/gerber/GerberGenPrefGroupUI.py:172
msgid ""
"Set the fill color for plotted objects.\n"
"First 6 digits are the color and the last 2\n"
"digits are for alpha (transparency) level."
msgstr ""
"Setează culoarea pentru obiectele afisate.\n"
"Primii 6 digiti sunt culoarea efectivă și ultimii\n"
"doi sunt pentru nivelul de transparenţă (alfa)."

#: AppGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:205
#: AppGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:298
#: AppGUI/preferences/general/GeneralGUIPrefGroupUI.py:190
#: AppGUI/preferences/general/GeneralGUIPrefGroupUI.py:257
#: AppGUI/preferences/gerber/GerberGenPrefGroupUI.py:189
msgid "Alpha"
msgstr "Alfa"

#: AppGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:207
#: AppGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:300
#: AppGUI/preferences/gerber/GerberGenPrefGroupUI.py:191
msgid "Set the fill transparency for plotted objects."
msgstr "Setează nivelul de transparenţă pentru obiectele afisate."

#: AppGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:231
msgid "CNCJob Object Color"
msgstr "Culoare obiect CNCJob"

#: AppGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:237
msgid "Set the color for plotted objects."
msgstr "Setați culoarea pentru obiectele trasate."

#: AppGUI/preferences/cncjob/CNCJobOptPrefGroupUI.py:27
msgid "CNC Job Options"
msgstr "Opțiuni CNCJob"

#: AppGUI/preferences/cncjob/CNCJobOptPrefGroupUI.py:31
msgid "Export G-Code"
msgstr "Exportă G-Code"

#: AppGUI/preferences/cncjob/CNCJobOptPrefGroupUI.py:47
msgid "Prepend to G-Code"
msgstr "Adaugă la inceputul G-Code"

#: AppGUI/preferences/cncjob/CNCJobOptPrefGroupUI.py:56
msgid ""
"Type here any G-Code commands you would like to add at the beginning of the "
"G-Code file."
msgstr ""
"Introduceți aici orice comandă G-Code pe care doriți să o adăugați la "
"începutul fișierului G-Code."

#: AppGUI/preferences/cncjob/CNCJobOptPrefGroupUI.py:63
msgid "Append to G-Code"
msgstr "Adaugă la sfârşitul G-Code"

#: AppGUI/preferences/cncjob/CNCJobOptPrefGroupUI.py:73
msgid ""
"Type here any G-Code commands you would like to append to the generated "
"file.\n"
"I.e.: M2 (End of program)"
msgstr ""
"Adaugă aici orice comenzi G-Code care se dorește să fie\n"
"inserate la sfârşitul codului G-Code.\n"
"De exemplu: M2 (Sfârșitul programului)"

#: AppGUI/preferences/excellon/ExcellonAdvOptPrefGroupUI.py:27
msgid "Excellon Adv. Options"
msgstr "Opțiuni Avans. Excellon"

#: AppGUI/preferences/excellon/ExcellonAdvOptPrefGroupUI.py:34
#: AppGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:33
#: AppGUI/preferences/gerber/GerberAdvOptPrefGroupUI.py:31
msgid "Advanced Options"
msgstr "Opțiuni avansate"

#: AppGUI/preferences/excellon/ExcellonAdvOptPrefGroupUI.py:36
msgid ""
"A list of Excellon advanced parameters.\n"
"Those parameters are available only for\n"
"Advanced App. Level."
msgstr ""
"O lista de parametri Excellon avansati.\n"
"Acesti parametri sunt disponibili doar\n"
"când este selectat Nivelul Avansat pentru\n"
"aplicaţie in Preferințe - > General."

#: AppGUI/preferences/excellon/ExcellonAdvOptPrefGroupUI.py:59
msgid "Toolchange X,Y"
msgstr "X,Y schimb. unealtă"

#: AppGUI/preferences/excellon/ExcellonAdvOptPrefGroupUI.py:61
#: AppGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:47
msgid "Toolchange X,Y position."
msgstr "Poziţia X,Y in format (x,y) unde se face schimbarea uneltei."

#: AppGUI/preferences/excellon/ExcellonAdvOptPrefGroupUI.py:121
#: AppGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:134
msgid "Spindle direction"
msgstr "Directie rotatie Motor"

#: AppGUI/preferences/excellon/ExcellonAdvOptPrefGroupUI.py:123
#: AppGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:136
msgid ""
"This sets the direction that the spindle is rotating.\n"
"It can be either:\n"
"- CW = clockwise or\n"
"- CCW = counter clockwise"
msgstr ""
"Aici se setează directia in care motorul se roteste.\n"
"Poate fi:\n"
"- CW = in sensul acelor de ceasornic\n"
"- CCW = in sensul invers acelor de ceasornic"

#: AppGUI/preferences/excellon/ExcellonAdvOptPrefGroupUI.py:134
#: AppGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:148
msgid "Fast Plunge"
msgstr "Plonjare rapidă"

#: AppGUI/preferences/excellon/ExcellonAdvOptPrefGroupUI.py:136
#: AppGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:150
msgid ""
"By checking this, the vertical move from\n"
"Z_Toolchange to Z_move is done with G0,\n"
"meaning the fastest speed available.\n"
"WARNING: the move is done at Toolchange X,Y coords."
msgstr ""
"Prin bifarea de aici, mișcarea de la Înălţimea unde se face schimbarea "
"uneltei\n"
"pana la Înălţimea unde se face deplasarea între taieri, se va face cu "
"comanda G0.\n"
"Aceasta inseamna că se va folosi viteza maxima disponibila.\n"
"\n"
"ATENTIE: mișcarea aceasta pe verticala se face la coordonatele X, Y unde se "
"schimba\n"
"unealta. Daca aveti ceva plasat sub unealtă ceva se va strica."

#: AppGUI/preferences/excellon/ExcellonAdvOptPrefGroupUI.py:143
msgid "Fast Retract"
msgstr "Retragere rapida"

#: AppGUI/preferences/excellon/ExcellonAdvOptPrefGroupUI.py:145
msgid ""
"Exit hole strategy.\n"
" - When uncheked, while exiting the drilled hole the drill bit\n"
"will travel slow, with set feedrate (G1), up to zero depth and then\n"
"travel as fast as possible (G0) to the Z Move (travel height).\n"
" - When checked the travel from Z cut (cut depth) to Z_move\n"
"(travel height) is done as fast as possible (G0) in one move."
msgstr ""
"Strategia de evacuare a găurii tocmai găurite.\n"
"- când nu este bifat, burghiul va ieși din gaura cu viteza feedrate "
"setată, \n"
"G1, pana ajunge la nivelul zero, ulterior ridicându-se pana la Înălţimea de "
"deplasare\n"
"cu viteza maxima G0\n"
"- când este bifat, burghiul se va deplasa de la adâncimea de tăiere pana la "
"adâncimea\n"
"de deplasare cu viteza maxima G0, intr-o singură mișcare."

#: AppGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:32
msgid "A list of Excellon Editor parameters."
msgstr "O listă de parametri ai Editorului Excellon."

#: AppGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:40
#: AppGUI/preferences/geometry/GeometryEditorPrefGroupUI.py:41
#: AppGUI/preferences/gerber/GerberEditorPrefGroupUI.py:41
#: AppGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:194
msgid "Selection limit"
msgstr "Limita selecţie"

#: AppGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:42
msgid ""
"Set the number of selected Excellon geometry\n"
"items above which the utility geometry\n"
"becomes just a selection rectangle.\n"
"Increases the performance when moving a\n"
"large number of geometric elements."
msgstr ""
"Setează numărul de geometrii Excellon selectate peste care\n"
"geometria utilitară devine o simplă formă pătratica de \n"
"selectie.\n"
"Creste performanta cand se muta un număr mai mare de \n"
"elemente geometrice."

#: AppGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:55
#: AppGUI/preferences/tools/ToolsNCCPrefGroupUI.py:117
#: AppGUI/preferences/tools/ToolsPaintPrefGroupUI.py:123
msgid "New Dia"
msgstr "Dia. nou"

#: AppGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:80
msgid "Linear Drill Array"
msgstr "Arie lineară de găuri"

#: AppGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:84
#: AppGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:232
#: AppGUI/preferences/gerber/GerberEditorPrefGroupUI.py:120
msgid "Linear Direction"
msgstr "Direcție liniară"

#: AppGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:126
msgid "Circular Drill Array"
msgstr "Arie circ. de găuri"

#: AppGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:130
#: AppGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:280
#: AppGUI/preferences/gerber/GerberEditorPrefGroupUI.py:164
msgid "Circular Direction"
msgstr "Direcția circulară"

#: AppGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:132
#: AppGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:282
#: AppGUI/preferences/gerber/GerberEditorPrefGroupUI.py:166
msgid ""
"Direction for circular array.\n"
"Can be CW = clockwise or CCW = counter clockwise."
msgstr ""
"Directia pentru aria circulară.\n"
"Poate fi CW = in sensul acelor de ceasornic sau CCW = invers acelor de "
"ceasornic."

#: AppGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:143
#: AppGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:293
#: AppGUI/preferences/gerber/GerberEditorPrefGroupUI.py:177
msgid "Circular Angle"
msgstr "Unghi circular"

#: AppGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:196
msgid ""
"Angle at which the slot is placed.\n"
"The precision is of max 2 decimals.\n"
"Min value is: -359.99 degrees.\n"
"Max value is:  360.00 degrees."
msgstr ""
"Unghiul la care este plasat slotul.\n"
"Precizia este de maxim 2 zecimale.\n"
"Valoarea minimă este: -359,99 grade.\n"
"Valoarea maximă este: 360,00 grade."

#: AppGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:215
msgid "Linear Slot Array"
msgstr "Arie lineară de Sloturi"

#: AppGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:276
msgid "Circular Slot Array"
msgstr "Arie circ. de Sloturi"

#: AppGUI/preferences/excellon/ExcellonExpPrefGroupUI.py:26
msgid "Excellon Export"
msgstr "Export Excellon"

#: AppGUI/preferences/excellon/ExcellonExpPrefGroupUI.py:30
#: AppGUI/preferences/gerber/GerberExpPrefGroupUI.py:31
msgid "Export Options"
msgstr "Opțiuni de Export"

#: AppGUI/preferences/excellon/ExcellonExpPrefGroupUI.py:32
msgid ""
"The parameters set here are used in the file exported\n"
"when using the File -> Export -> Export Excellon menu entry."
msgstr ""
"Acesti parametri listati aici sunt folositi atunci când\n"
"se exporta un fişier Excellon folosind:\n"
"File -> Exporta -> Exporta Excellon."

#: AppGUI/preferences/excellon/ExcellonExpPrefGroupUI.py:41
#: AppGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:163
#: AppGUI/preferences/general/GeneralAppPrefGroupUI.py:39
#: AppGUI/preferences/gerber/GerberExpPrefGroupUI.py:42
#: AppGUI/preferences/gerber/GerberGenPrefGroupUI.py:82
#: AppTools/ToolDistance.py:56 AppTools/ToolDistanceMin.py:49
#: AppTools/ToolPcbWizard.py:127 AppTools/ToolProperties.py:154
msgid "Units"
msgstr "Unităti"

#: AppGUI/preferences/excellon/ExcellonExpPrefGroupUI.py:43
#: AppGUI/preferences/excellon/ExcellonExpPrefGroupUI.py:49
msgid "The units used in the Excellon file."
msgstr "Unitatile de masura folosite in fişierul Excellon."

#: AppGUI/preferences/excellon/ExcellonExpPrefGroupUI.py:46
#: AppGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:87
#: AppGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:173
#: AppGUI/preferences/gerber/GerberExpPrefGroupUI.py:47
#: AppGUI/preferences/gerber/GerberGenPrefGroupUI.py:87
#: AppTools/ToolCalculators.py:61 AppTools/ToolPcbWizard.py:125
msgid "INCH"
msgstr "Inch"

#: AppGUI/preferences/excellon/ExcellonExpPrefGroupUI.py:47
#: AppGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:174
#: AppGUI/preferences/general/GeneralAppPrefGroupUI.py:43
#: AppGUI/preferences/gerber/GerberExpPrefGroupUI.py:48
#: AppGUI/preferences/gerber/GerberGenPrefGroupUI.py:88
#: AppTools/ToolCalculators.py:62 AppTools/ToolPcbWizard.py:126
msgid "MM"
msgstr "MM"

#: AppGUI/preferences/excellon/ExcellonExpPrefGroupUI.py:55
#: AppGUI/preferences/gerber/GerberExpPrefGroupUI.py:56
msgid "Int/Decimals"
msgstr "Înt/Zecimale"

#: AppGUI/preferences/excellon/ExcellonExpPrefGroupUI.py:57
msgid ""
"The NC drill files, usually named Excellon files\n"
"are files that can be found in different formats.\n"
"Here we set the format used when the provided\n"
"coordinates are not using period."
msgstr ""
"Fişierele NC, numite usual fişiere Excellon\n"
"sunt fişiere care pot fi gasite in diverse formate.\n"
"Aici se setează formatul Excellon când nu se utilizează\n"
"coordonate cu zecimale."

#: AppGUI/preferences/excellon/ExcellonExpPrefGroupUI.py:69
#: AppGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:95
#: AppGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:124
msgid ""
"This numbers signify the number of digits in\n"
"the whole part of Excellon coordinates."
msgstr ""
"Acest număr reprezinta numărul de digiti din partea\n"
"intreaga a coordonatelor Excellon."

#: AppGUI/preferences/excellon/ExcellonExpPrefGroupUI.py:82
#: AppGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:108
#: AppGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:137
msgid ""
"This numbers signify the number of digits in\n"
"the decimal part of Excellon coordinates."
msgstr ""
"Acest număr reprezinta numărul de digiti din partea\n"
"zecimala a coordonatelor Excellon."

#: AppGUI/preferences/excellon/ExcellonExpPrefGroupUI.py:91
msgid "Format"
msgstr "Format"

#: AppGUI/preferences/excellon/ExcellonExpPrefGroupUI.py:93
#: AppGUI/preferences/excellon/ExcellonExpPrefGroupUI.py:103
msgid ""
"Select the kind of coordinates format used.\n"
"Coordinates can be saved with decimal point or without.\n"
"When there is no decimal point, it is required to specify\n"
"the number of digits for integer part and the number of decimals.\n"
"Also it will have to be specified if LZ = leading zeros are kept\n"
"or TZ = trailing zeros are kept."
msgstr ""
"Selectati tipul formatului de coordonate folosit.\n"
"Coordonatele se pot salva cu punct zecimal sau fără.\n"
"Când nu se foloseşte punctul zecimal ca separator între\n"
"partea intreaga și partea zecimala, este necesar să se\n"
"specifice numărul de digiti folosit pentru partea intreaga\n"
"și numărul de digiti folosit pentru partea zecimala.\n"
"Trebuie specificat și modul in care sunt tratate zerourile:\n"
"- LZ = zerourile prefix sunt pastrate și cele sufix eliminate\n"
"- TZ = zerourile prefix sunt eliminate și cele sufix pastrate."

#: AppGUI/preferences/excellon/ExcellonExpPrefGroupUI.py:100
msgid "Decimal"
msgstr "Zecimale"

#: AppGUI/preferences/excellon/ExcellonExpPrefGroupUI.py:101
msgid "No-Decimal"
msgstr "Fără zecimale"

#: AppGUI/preferences/excellon/ExcellonExpPrefGroupUI.py:114
#: AppGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:145
#: AppGUI/preferences/gerber/GerberExpPrefGroupUI.py:96
#: AppGUI/preferences/gerber/GerberGenPrefGroupUI.py:97
msgid "Zeros"
msgstr "Zero-uri"

#: AppGUI/preferences/excellon/ExcellonExpPrefGroupUI.py:117
msgid ""
"This sets the type of Excellon zeros.\n"
"If LZ then Leading Zeros are kept and\n"
"Trailing Zeros are removed.\n"
"If TZ is checked then Trailing Zeros are kept\n"
"and Leading Zeros are removed."
msgstr ""
"Aici se setează tipul de suprimare a zerourilor,\n"
"in cazul unui fişier Excellon.\n"
"LZ = zerourile din fata numărului sunt pastrate și\n"
"cele de la final sunt indepartate.\n"
"TZ = zerourile din fata numărului sunt indepartate și\n"
"cele de la final sunt pastrate.\n"
"(Invers fata de fişierele Gerber)."

#: AppGUI/preferences/excellon/ExcellonExpPrefGroupUI.py:124
#: AppGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:158
#: AppGUI/preferences/gerber/GerberExpPrefGroupUI.py:106
#: AppGUI/preferences/gerber/GerberGenPrefGroupUI.py:107
#: AppTools/ToolPcbWizard.py:111
msgid "LZ"
msgstr "LZ"

#: AppGUI/preferences/excellon/ExcellonExpPrefGroupUI.py:125
#: AppGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:159
#: AppGUI/preferences/gerber/GerberExpPrefGroupUI.py:107
#: AppGUI/preferences/gerber/GerberGenPrefGroupUI.py:108
#: AppTools/ToolPcbWizard.py:112
msgid "TZ"
msgstr "TZ"

#: AppGUI/preferences/excellon/ExcellonExpPrefGroupUI.py:127
msgid ""
"This sets the default type of Excellon zeros.\n"
"If LZ then Leading Zeros are kept and\n"
"Trailing Zeros are removed.\n"
"If TZ is checked then Trailing Zeros are kept\n"
"and Leading Zeros are removed."
msgstr ""
"Acesta este tipul implicit de zero-uri Excellon.\n"
"- LZ = zerourile prefix sunt pastrate și cele sufix eliminate\n"
"- TZ = zerourile prefix sunt eliminate și cele sufix pastrate."

#: AppGUI/preferences/excellon/ExcellonExpPrefGroupUI.py:137
msgid "Slot type"
msgstr "Tip slot"

#: AppGUI/preferences/excellon/ExcellonExpPrefGroupUI.py:140
#: AppGUI/preferences/excellon/ExcellonExpPrefGroupUI.py:150
msgid ""
"This sets how the slots will be exported.\n"
"If ROUTED then the slots will be routed\n"
"using M15/M16 commands.\n"
"If DRILLED(G85) the slots will be exported\n"
"using the Drilled slot command (G85)."
msgstr ""
"Aceasta stabilește modul în care sloturile vor fi exportate.\n"
"Dacă sunt Decupate, atunci sloturile vor fi procesate\n"
"folosind comenzile M15 / M16.\n"
"Dacă sunt Găurite (G85) sloturile vor fi exportate\n"
"folosind comanda slotului găurit (G85)."

#: AppGUI/preferences/excellon/ExcellonExpPrefGroupUI.py:147
msgid "Routed"
msgstr "Decupate"

#: AppGUI/preferences/excellon/ExcellonExpPrefGroupUI.py:148
msgid "Drilled(G85)"
msgstr "Găurite(G85)"

#: AppGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:29
msgid "Excellon General"
msgstr "Excellon General"

#: AppGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:62
msgid "Excellon Format"
msgstr "Format Excellon"

#: AppGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:64
msgid ""
"The NC drill files, usually named Excellon files\n"
"are files that can be found in different formats.\n"
"Here we set the format used when the provided\n"
"coordinates are not using period.\n"
"\n"
"Possible presets:\n"
"\n"
"PROTEUS 3:3 MM LZ\n"
"DipTrace 5:2 MM TZ\n"
"DipTrace 4:3 MM LZ\n"
"\n"
"EAGLE 3:3 MM TZ\n"
"EAGLE 4:3 MM TZ\n"
"EAGLE 2:5 INCH TZ\n"
"EAGLE 3:5 INCH TZ\n"
"\n"
"ALTIUM 2:4 INCH LZ\n"
"Sprint Layout 2:4 INCH LZ\n"
"KiCAD 3:5 INCH TZ"
msgstr ""
"Fişierele de găurire NC drills numite generic Excellon\n"
"sunt fişiere care nu respecta clar un format.\n"
"Fiecare companie și-a aplicat propria viziune aşa încât\n"
"s-a ajuns că nu se poate face o recunoaștere automata\n"
"a formatului Excellon in fiecare caz.\n"
"Aici putem seta manual ce format ne asteptăm să gasim,\n"
"când coordonatele nu sunt reprezentate cu\n"
"separator zecimal.\n"
"\n"
"Setări posibile:\n"
"\n"
"PROTEUS 3:3 MM LZ\n"
"DipTrace 5:2 MM TZ\n"
"DipTrace 4:3 MM LZ\n"
"\n"
"EAGLE 3:3 MM TZ\n"
"EAGLE 4:3 MM TZ\n"
"EAGLE 2:5 INCH TZ\n"
"EAGLE 3:5 INCH TZ\n"
"\n"
"ALTIUM 2:4 INCH LZ\n"
"Sprint Layout 2:4 INCH LZ\n"
"KiCAD 3:5 INCH TZ"

#: AppGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:88
msgid "Default values for INCH are 2:4"
msgstr ""
"Valorile default pentru Inch sunt 2:4\n"
"adica 2 parti intregi și 4 zecimale"

#: AppGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:116
msgid "METRIC"
msgstr "Metric"

#: AppGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:117
msgid "Default values for METRIC are 3:3"
msgstr ""
"Valorile default pentru Metric sunt 3:3\n"
"adica 3 parti intregi și 3 zecimale"

#: AppGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:148
msgid ""
"This sets the type of Excellon zeros.\n"
"If LZ then Leading Zeros are kept and\n"
"Trailing Zeros are removed.\n"
"If TZ is checked then Trailing Zeros are kept\n"
"and Leading Zeros are removed.\n"
"\n"
"This is used when there is no information\n"
"stored in the Excellon file."
msgstr ""
"Aici se setează tipul de suprimare a zerourilor,\n"
"in cazul unui fişier Excellon.\n"
"LZ = zerourile din fata numărului sunt pastrate și\n"
"cele de la final sunt indepartate.\n"
"TZ = zerourile din fata numărului sunt indepartate și\n"
"cele de la final sunt pastrate.\n"
"(Invers fata de fişierele Gerber).\n"
"Se foloseşte atunci când nu există informații\n"
"stocate în fișierul Excellon."

#: AppGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:166
msgid ""
"This sets the default units of Excellon files.\n"
"If it is not detected in the parsed file the value here\n"
"will be used.Some Excellon files don't have an header\n"
"therefore this parameter will be used."
msgstr ""
"Aceasta valoare este valoarea la care se recurge\n"
"in cazul in care nu se poate determina automat\n"
"atunci când se face parsarea fişierlui Excellon.\n"
"Unele fişiere de găurire (Excellon) nu au header\n"
"(unde se gasesc unitatile) și atunci se va folosi\n"
"aceasta valoare."

#: AppGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:176
msgid ""
"This sets the units of Excellon files.\n"
"Some Excellon files don't have an header\n"
"therefore this parameter will be used."
msgstr ""
"Aceasta valoare este valoarea la care se recurge\n"
"in cazul in care nu se poate determina automat\n"
"atunci când se face parsarea fişierlui Excellon.\n"
"Unele fişiere de găurire (Excellon) nu au header\n"
"(unde se gasesc unitatile) și atunci se va folosi\n"
"aceasta valoare."

#: AppGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:184
msgid "Update Export settings"
msgstr "Actualizeaza setarile de Export"

#: AppGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:201
msgid "Excellon Optimization"
msgstr "Optimizare Excellon"

#: AppGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:204
msgid "Algorithm:"
msgstr "Algoritm:"

#: AppGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:206
#: AppGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:222
msgid ""
"This sets the optimization type for the Excellon drill path.\n"
"If <<MetaHeuristic>> is checked then Google OR-Tools algorithm with\n"
"MetaHeuristic Guided Local Path is used. Default search time is 3sec.\n"
"If <<Basic>> is checked then Google OR-Tools Basic algorithm is used.\n"
"If <<TSA>> is checked then Travelling Salesman algorithm is used for\n"
"drill path optimization.\n"
"\n"
"If this control is disabled, then FlatCAM works in 32bit mode and it uses\n"
"Travelling Salesman algorithm for path optimization."
msgstr ""
"Aceasta setează tipul de optimizare pentru calea de găurire Excellon.\n"
"Dacă <<MetaHeuristic>> este bifat, atunci algoritmul Google OR-Tools cu\n"
"Calea locală ghidată MetaHeuristic este utilizat. Timpul implicit de căutare "
"este de 3 secunde.\n"
"Dacă <<Basic>> este bifat, atunci algoritmul Google OR-Tools Basic este "
"utilizat.\n"
"Dacă <<TSA>> este bifat, atunci algoritmul Traveling Salesman este utilizat "
"pentru\n"
"optimizarea căii de găurire\n"
"\n"
"Dacă acest control este dezactivat, FlatCAM funcționează în modul 32 biți și "
"folosește\n"
"Algoritmul Traveling Salesman pentru optimizarea căii."

#: AppGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:217
msgid "MetaHeuristic"
msgstr "MetaHeuristic"

#: AppGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:218
#: AppGUI/preferences/general/GeneralAppPrefGroupUI.py:104
#: AppObjects/FlatCAMExcellon.py:683 AppObjects/FlatCAMGeometry.py:561
#: AppObjects/FlatCAMGerber.py:251
msgid "Basic"
msgstr "Baza"

#: AppGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:219
msgid "TSA"
msgstr "TSA"

#: AppGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:236
#: AppGUI/preferences/excellon/ExcellonOptPrefGroupUI.py:245
#: AppGUI/preferences/geometry/GeometryOptPrefGroupUI.py:237
msgid "Duration"
msgstr "Durată"

#: AppGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:239
msgid ""
"When OR-Tools Metaheuristic (MH) is enabled there is a\n"
"maximum threshold for how much time is spent doing the\n"
"path optimization. This max duration is set here.\n"
"In seconds."
msgstr ""
"Când se foloseşte optimziarea MH, aceasta valoare\n"
"reprezinta cat timp se sta pentru fiecare element in\n"
"incercarea de a afla calea optima."

#: AppGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:258
msgid "Excellon Object Color"
msgstr "Culoare obiect Excellon"

#: AppGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:264
#: AppGUI/preferences/geometry/GeometryGenPrefGroupUI.py:86
#: AppGUI/preferences/gerber/GerberGenPrefGroupUI.py:155
msgid "Set the line color for plotted objects."
msgstr "Setează culoarea conturului."

#: AppGUI/preferences/excellon/ExcellonOptPrefGroupUI.py:29
msgid "Excellon Options"
msgstr "Opțiuni Excellon"

#: AppGUI/preferences/excellon/ExcellonOptPrefGroupUI.py:33
#: AppGUI/preferences/geometry/GeometryOptPrefGroupUI.py:34
msgid "Create CNC Job"
msgstr "Crează CNCJob"

#: AppGUI/preferences/excellon/ExcellonOptPrefGroupUI.py:35
msgid ""
"Parameters used to create a CNC Job object\n"
"for this drill object."
msgstr ""
"Parametrii folositi pentru a crea un obiect FlatCAM tip CNCJob\n"
"din acest obiect Excellon."

#: AppGUI/preferences/excellon/ExcellonOptPrefGroupUI.py:152
#: AppGUI/preferences/geometry/GeometryOptPrefGroupUI.py:121
msgid "Tool change"
msgstr "Schimb unealtă"

#: AppGUI/preferences/excellon/ExcellonOptPrefGroupUI.py:236
#: AppGUI/preferences/geometry/GeometryOptPrefGroupUI.py:232
msgid "Enable Dwell"
msgstr "Activați Pauză"

#: AppGUI/preferences/excellon/ExcellonOptPrefGroupUI.py:259
msgid ""
"The preprocessor JSON file that dictates\n"
"Gcode output."
msgstr ""
"Fișierul JSON postprocesor care dictează\n"
"codul Gcode."

#: AppGUI/preferences/excellon/ExcellonOptPrefGroupUI.py:270
msgid "Gcode"
msgstr "Gcode"

#: AppGUI/preferences/excellon/ExcellonOptPrefGroupUI.py:272
msgid ""
"Choose what to use for GCode generation:\n"
"'Drills', 'Slots' or 'Both'.\n"
"When choosing 'Slots' or 'Both', slots will be\n"
"converted to drills."
msgstr ""
"Alege ce anume să fie folot ca sursa pentru generarea de GCode:\n"
"- Găuri\n"
"- Sloturi\n"
"- Ambele.\n"
"Când se alege Sloturi sau Ambele, sloturile vor fi convertite in serii de "
"găuri."

#: AppGUI/preferences/excellon/ExcellonOptPrefGroupUI.py:288
msgid "Mill Holes"
msgstr "Frezare găuri"

#: AppGUI/preferences/excellon/ExcellonOptPrefGroupUI.py:290
msgid "Create Geometry for milling holes."
msgstr "Crează un obiect tip Geometrie pentru frezarea găurilor."

#: AppGUI/preferences/excellon/ExcellonOptPrefGroupUI.py:294
msgid "Drill Tool dia"
msgstr "Dia. Burghiu Găurire"

#: AppGUI/preferences/excellon/ExcellonOptPrefGroupUI.py:305
msgid "Slot Tool dia"
msgstr "Dia. Freza Slot"

#: AppGUI/preferences/excellon/ExcellonOptPrefGroupUI.py:307
msgid ""
"Diameter of the cutting tool\n"
"when milling slots."
msgstr "Diametrul frezei când se frezează sloturile."

#: AppGUI/preferences/general/GeneralAPPSetGroupUI.py:28
msgid "App Settings"
msgstr "Setări Aplicație"

#: AppGUI/preferences/general/GeneralAPPSetGroupUI.py:49
msgid "Grid Settings"
msgstr "Setări Grilă"

#: AppGUI/preferences/general/GeneralAPPSetGroupUI.py:53
msgid "X value"
msgstr "Val X"

#: AppGUI/preferences/general/GeneralAPPSetGroupUI.py:55
msgid "This is the Grid snap value on X axis."
msgstr "Aceasta este valoare pentru lipire pe Grid pe axa X."

#: AppGUI/preferences/general/GeneralAPPSetGroupUI.py:65
msgid "Y value"
msgstr "Val Y"

#: AppGUI/preferences/general/GeneralAPPSetGroupUI.py:67
msgid "This is the Grid snap value on Y axis."
msgstr "Aceasta este valoare pentru lipire pe Grid pe axa Y."

#: AppGUI/preferences/general/GeneralAPPSetGroupUI.py:77
msgid "Snap Max"
msgstr "Lipire Max"

#: AppGUI/preferences/general/GeneralAPPSetGroupUI.py:92
msgid "Workspace Settings"
msgstr "Setări ale Spațiului de Lucru"

#: AppGUI/preferences/general/GeneralAPPSetGroupUI.py:95
msgid "Active"
msgstr "Activ"

#: AppGUI/preferences/general/GeneralAPPSetGroupUI.py:97
msgid ""
"Draw a delimiting rectangle on canvas.\n"
"The purpose is to illustrate the limits for our work."
msgstr ""
"Desenează un patrulater care delimitează o suprafată de lucru.\n"
"Scopul este de a ilustra limitele suprafetei noastre de lucru."

#: AppGUI/preferences/general/GeneralAPPSetGroupUI.py:105
msgid ""
"Select the type of rectangle to be used on canvas,\n"
"as valid workspace."
msgstr ""
"Selectează tipul de patrulater care va fi desenat pe canvas,\n"
"pentru a delimita suprafata de lucru disponibilă (SL)."

#: AppGUI/preferences/general/GeneralAPPSetGroupUI.py:171
msgid "Orientation"
msgstr "Orientare"

#: AppGUI/preferences/general/GeneralAPPSetGroupUI.py:172
#: AppGUI/preferences/tools/ToolsFilmPrefGroupUI.py:239
#: AppTools/ToolFilm.py:405
msgid ""
"Can be:\n"
"- Portrait\n"
"- Landscape"
msgstr ""
"Poate fi:\n"
"- Portret\n"
"- Peisaj"

#: AppGUI/preferences/general/GeneralAPPSetGroupUI.py:176
#: AppGUI/preferences/tools/ToolsFilmPrefGroupUI.py:243
#: AppTools/ToolFilm.py:409
msgid "Portrait"
msgstr "Portret"

#: AppGUI/preferences/general/GeneralAPPSetGroupUI.py:177
#: AppGUI/preferences/tools/ToolsFilmPrefGroupUI.py:244
#: AppTools/ToolFilm.py:410
msgid "Landscape"
msgstr "Peisaj"

#: AppGUI/preferences/general/GeneralAPPSetGroupUI.py:201
msgid "Notebook"
msgstr "Agendă"

#: AppGUI/preferences/general/GeneralAPPSetGroupUI.py:203
#, fuzzy
#| msgid ""
#| "This sets the font size for the elements found in the Notebook.\n"
#| "The notebook is the collapsible area in the left side of the GUI,\n"
#| "and include the Project, Selected and Tool tabs."
msgid ""
"This sets the font size for the elements found in the Notebook.\n"
"The notebook is the collapsible area in the left side of the AppGUI,\n"
"and include the Project, Selected and Tool tabs."
msgstr ""
"Aceasta stabilește dimensiunea fontului pentru elementele \n"
"găsite în Notebook.\n"
"Notebook-ul este zona pliabilă din partea stângă a GUI,\n"
"și include filele Proiect, Selectat și Unelte."

#: AppGUI/preferences/general/GeneralAPPSetGroupUI.py:222
msgid "Axis"
msgstr "Axă"

#: AppGUI/preferences/general/GeneralAPPSetGroupUI.py:224
msgid "This sets the font size for canvas axis."
msgstr "Aceasta setează dimensiunea fontului pentru axele zonei de afisare."

#: AppGUI/preferences/general/GeneralAPPSetGroupUI.py:241
msgid "Textbox"
msgstr "Casetă de text"

#: AppGUI/preferences/general/GeneralAPPSetGroupUI.py:243
#, fuzzy
#| msgid ""
#| "This sets the font size for the Textbox GUI\n"
#| "elements that are used in FlatCAM."
msgid ""
"This sets the font size for the Textbox AppGUI\n"
"elements that are used in FlatCAM."
msgstr ""
"Aceasta setează dimensiunea fontului pentru elementele \n"
"interfața GUI care sunt utilizate în FlatCAM."

#: AppGUI/preferences/general/GeneralAPPSetGroupUI.py:261
msgid "HUD"
msgstr ""

#: AppGUI/preferences/general/GeneralAPPSetGroupUI.py:263
#, fuzzy
#| msgid "This sets the font size for canvas axis."
msgid "This sets the font size for the Heads Up Display."
msgstr "Aceasta setează dimensiunea fontului pentru axele zonei de afisare."

#: AppGUI/preferences/general/GeneralAPPSetGroupUI.py:288
msgid "Mouse Settings"
msgstr "Setări mouse"

#: AppGUI/preferences/general/GeneralAPPSetGroupUI.py:292
msgid "Cursor Shape"
msgstr "Forma cursorului"

#: AppGUI/preferences/general/GeneralAPPSetGroupUI.py:294
msgid ""
"Choose a mouse cursor shape.\n"
"- Small -> with a customizable size.\n"
"- Big -> Infinite lines"
msgstr ""
"Alegeți o formă de cursor a mouse-ului.\n"
"- Mic -> cu o dimensiune personalizabilă.\n"
"- Mare -> Linii infinite"

#: AppGUI/preferences/general/GeneralAPPSetGroupUI.py:300
msgid "Small"
msgstr "Mic"

#: AppGUI/preferences/general/GeneralAPPSetGroupUI.py:301
msgid "Big"
msgstr "Mare"

#: AppGUI/preferences/general/GeneralAPPSetGroupUI.py:308
msgid "Cursor Size"
msgstr "Dimensiunea cursorului"

#: AppGUI/preferences/general/GeneralAPPSetGroupUI.py:310
msgid "Set the size of the mouse cursor, in pixels."
msgstr "Setați dimensiunea cursorului mouse-ului, în pixeli."

#: AppGUI/preferences/general/GeneralAPPSetGroupUI.py:321
msgid "Cursor Width"
msgstr "Lățimea cursorului"

#: AppGUI/preferences/general/GeneralAPPSetGroupUI.py:323
msgid "Set the line width of the mouse cursor, in pixels."
msgstr "Setați lățimea liniei cursorului mouse-ului, în pixeli."

#: AppGUI/preferences/general/GeneralAPPSetGroupUI.py:334
#: AppGUI/preferences/general/GeneralAPPSetGroupUI.py:341
msgid "Cursor Color"
msgstr "Culoarea cursorului"

#: AppGUI/preferences/general/GeneralAPPSetGroupUI.py:336
msgid "Check this box to color mouse cursor."
msgstr "Bifează această casetă pentru a colora cursorul mouse-ului."

#: AppGUI/preferences/general/GeneralAPPSetGroupUI.py:343
msgid "Set the color of the mouse cursor."
msgstr "Setați culoarea cursorului mouse-ului."

#: AppGUI/preferences/general/GeneralAPPSetGroupUI.py:366
msgid "Pan Button"
msgstr "Buton Pan (mișcare)"

#: AppGUI/preferences/general/GeneralAPPSetGroupUI.py:368
msgid ""
"Select the mouse button to use for panning:\n"
"- MMB --> Middle Mouse Button\n"
"- RMB --> Right Mouse Button"
msgstr ""
"Selectează butonul folosit pentru 'mișcare':\n"
"- MMB - butonul din mijloc al mouse-ului\n"
"- RMB - butonul in dreapta al mouse-ului"

#: AppGUI/preferences/general/GeneralAPPSetGroupUI.py:372
msgid "MMB"
msgstr "MMB"

#: AppGUI/preferences/general/GeneralAPPSetGroupUI.py:373
msgid "RMB"
msgstr "RMB"

#: AppGUI/preferences/general/GeneralAPPSetGroupUI.py:379
msgid "Multiple Selection"
msgstr "Selecție Multiplă"

#: AppGUI/preferences/general/GeneralAPPSetGroupUI.py:381
msgid "Select the key used for multiple selection."
msgstr "Selectează tasta folosita pentru selectia multipla."

#: AppGUI/preferences/general/GeneralAPPSetGroupUI.py:383
msgid "CTRL"
msgstr "CTRL"

#: AppGUI/preferences/general/GeneralAPPSetGroupUI.py:384
msgid "SHIFT"
msgstr "SHIFT"

#: AppGUI/preferences/general/GeneralAPPSetGroupUI.py:395
msgid "Delete object confirmation"
msgstr "Confirmare de ștergere a obiectului"

#: AppGUI/preferences/general/GeneralAPPSetGroupUI.py:397
msgid ""
"When checked the application will ask for user confirmation\n"
"whenever the Delete object(s) event is triggered, either by\n"
"menu shortcut or key shortcut."
msgstr ""
"Când este bifat, aplicația va cere confirmarea utilizatorului\n"
"ori de câte ori este declanșat evenimentul de Ștergere a \n"
"unor obiecte, fie de cu ajutorul meniurilor sau cu combinatii de taste."

#: AppGUI/preferences/general/GeneralAPPSetGroupUI.py:404
msgid "\"Open\" behavior"
msgstr "Stil \"Încarcare\""

#: AppGUI/preferences/general/GeneralAPPSetGroupUI.py:406
msgid ""
"When checked the path for the last saved file is used when saving files,\n"
"and the path for the last opened file is used when opening files.\n"
"\n"
"When unchecked the path for opening files is the one used last: either the\n"
"path for saving files or the path for opening files."
msgstr ""
"Cand este bifat, calea de salvare a ultimului fiser salvat este folosită "
"cand se \n"
"salvează fisiere si calea de deschidere pt ultimul fisier este folosită cand "
"se \n"
"deschide fisiere.\n"
"\n"
"Cand este debifat, calea de deshidere pt ultimul fisier este folosită pt "
"ambele \n"
"cazuri: fie că se deschide un fisier, fie că se salvează un fisier."

#: AppGUI/preferences/general/GeneralAPPSetGroupUI.py:415
msgid "Enable ToolTips"
msgstr "Activează ToolTip-uri"

#: AppGUI/preferences/general/GeneralAPPSetGroupUI.py:417
msgid ""
"Check this box if you want to have toolTips displayed\n"
"when hovering with mouse over items throughout the App."
msgstr ""
"Bifează daca dorești ca să fie afisate texte explicative când se\n"
"tine mouse-ul deasupra diverselor texte din FlatCAM."

#: AppGUI/preferences/general/GeneralAPPSetGroupUI.py:424
msgid "Allow Machinist Unsafe Settings"
msgstr "Permiteți setări nesigure pt Mașiniști"

#: AppGUI/preferences/general/GeneralAPPSetGroupUI.py:426
msgid ""
"If checked, some of the application settings will be allowed\n"
"to have values that are usually unsafe to use.\n"
"Like Z travel negative values or Z Cut positive values.\n"
"It will applied at the next application start.\n"
"<<WARNING>>: Don't change this unless you know what you are doing !!!"
msgstr ""
"Dacă este bifat, unele dintre setările aplicației vor fi permise\n"
"pentru a avea valori de obicei nesigure de utilizat.\n"
"Cum ar fi valori negative pt Z Travel sau valori positive pt Z Tăieri .\n"
"Se va aplica la următoarea pornire a aplicatiei.\n"
"<<AVERTISMENT>>: Nu schimbați acest lucru decât dacă știți ce faceți !!!"

#: AppGUI/preferences/general/GeneralAPPSetGroupUI.py:438
msgid "Bookmarks limit"
msgstr "Limită nr. bookmark-uri"

#: AppGUI/preferences/general/GeneralAPPSetGroupUI.py:440
msgid ""
"The maximum number of bookmarks that may be installed in the menu.\n"
"The number of bookmarks in the bookmark manager may be greater\n"
"but the menu will hold only so much."
msgstr ""
"Numărul maxim de bookmark-uri care pot fi instalate în meniu.\n"
"Numărul de bookmark-uri în managerul de bookmark-uri poate fi mai mare\n"
"dar meniul va conține doar atât de mult."

#: AppGUI/preferences/general/GeneralAPPSetGroupUI.py:449
msgid "Activity Icon"
msgstr "Icon activitare"

#: AppGUI/preferences/general/GeneralAPPSetGroupUI.py:451
msgid "Select the GIF that show activity when FlatCAM is active."
msgstr "Selectați GIF-ul care arată activitatea când FlatCAM este activ."

#: AppGUI/preferences/general/GeneralAppPrefGroupUI.py:29
msgid "App Preferences"
msgstr "Preferințele Aplicaţie"

#: AppGUI/preferences/general/GeneralAppPrefGroupUI.py:40
msgid ""
"The default value for FlatCAM units.\n"
"Whatever is selected here is set every time\n"
"FlatCAM is started."
msgstr ""
"Unitatea de masura pt FlatCAM.\n"
"Este setată la fiecare pornire a programului."

#: AppGUI/preferences/general/GeneralAppPrefGroupUI.py:44
msgid "IN"
msgstr "Inch"

#: AppGUI/preferences/general/GeneralAppPrefGroupUI.py:50
msgid "Precision MM"
msgstr "Precizie MM"

#: AppGUI/preferences/general/GeneralAppPrefGroupUI.py:52
msgid ""
"The number of decimals used throughout the application\n"
"when the set units are in METRIC system.\n"
"Any change here require an application restart."
msgstr ""
"Numărul de zecimale utilizate în întreaga aplicație\n"
"când unitățile setate sunt în sistem METRIC.\n"
"Orice modificare necesită repornirea aplicației."

#: AppGUI/preferences/general/GeneralAppPrefGroupUI.py:64
msgid "Precision INCH"
msgstr "Precizie INCH"

#: AppGUI/preferences/general/GeneralAppPrefGroupUI.py:66
msgid ""
"The number of decimals used throughout the application\n"
"when the set units are in INCH system.\n"
"Any change here require an application restart."
msgstr ""
"Numărul de zecimale utilizate în întreaga aplicație\n"
"când unitățile setate sunt în sistem INCH.\n"
"Orice modificare necesită repornirea aplicației."

#: AppGUI/preferences/general/GeneralAppPrefGroupUI.py:78
msgid "Graphic Engine"
msgstr "Motor grafic"

#: AppGUI/preferences/general/GeneralAppPrefGroupUI.py:79
msgid ""
"Choose what graphic engine to use in FlatCAM.\n"
"Legacy(2D) -> reduced functionality, slow performance but enhanced "
"compatibility.\n"
"OpenGL(3D) -> full functionality, high performance\n"
"Some graphic cards are too old and do not work in OpenGL(3D) mode, like:\n"
"Intel HD3000 or older. In this case the plot area will be black therefore\n"
"use the Legacy(2D) mode."
msgstr ""
"Alegeți ce motor grafic să utilizați în FlatCAM.\n"
"Legacy (2D) -> funcționalitate redusă, performanțe lente, dar "
"compatibilitate îmbunătățită.\n"
"OpenGL (3D) -> funcționalitate completă, performanță ridicată\n"
"Unele placi video sunt prea vechi și nu funcționează în modul OpenGL (3D), "
"cum ar fi:\n"
"Intel HD3000 sau mai vechi. În acest caz, suprafața de afisare va fi neagră\n"
"prin urmare folosiți modul Legacy (2D)."

#: AppGUI/preferences/general/GeneralAppPrefGroupUI.py:85
msgid "Legacy(2D)"
msgstr "Legacy(2D)"

#: AppGUI/preferences/general/GeneralAppPrefGroupUI.py:86
msgid "OpenGL(3D)"
msgstr "OpenGL(3D)"

#: AppGUI/preferences/general/GeneralAppPrefGroupUI.py:98
msgid "APP. LEVEL"
msgstr "Nivel aplicatie"

#: AppGUI/preferences/general/GeneralAppPrefGroupUI.py:99
msgid ""
"Choose the default level of usage for FlatCAM.\n"
"BASIC level -> reduced functionality, best for beginner's.\n"
"ADVANCED level -> full functionality.\n"
"\n"
"The choice here will influence the parameters in\n"
"the Selected Tab for all kinds of FlatCAM objects."
msgstr ""
"Nivelul default de utilizare pt FlatCAM.\n"
"Nivel BAZA -> functionalitate simplificata, potrivit pt incepatori\n"
"Nivel AVANSAT -> functionalitate completa.\n"
"\n"
"Alegerea efectuata aici va influenta ce aparamtri sunt disponibili\n"
"in Tab-ul SELECTAT dar și in alte parti ale FlatCAM."

#: AppGUI/preferences/general/GeneralAppPrefGroupUI.py:105
#: AppObjects/FlatCAMExcellon.py:696 AppObjects/FlatCAMGeometry.py:582
#: AppObjects/FlatCAMGerber.py:278
msgid "Advanced"
msgstr "Avansat"

#: AppGUI/preferences/general/GeneralAppPrefGroupUI.py:111
msgid "Portable app"
msgstr "Aplicație portabilă"

#: AppGUI/preferences/general/GeneralAppPrefGroupUI.py:112
msgid ""
"Choose if the application should run as portable.\n"
"\n"
"If Checked the application will run portable,\n"
"which means that the preferences files will be saved\n"
"in the application folder, in the lib\\config subfolder."
msgstr ""
"Alegeți dacă aplicația ar trebui să funcționeze in modul portabil.\n"
"\n"
"Dacă e bifat, aplicația va rula portabil,\n"
"ceea ce înseamnă că fișierele de preferințe vor fi salvate\n"
"în folderul aplicației, în subfolderul lib \\ config."

#: AppGUI/preferences/general/GeneralAppPrefGroupUI.py:125
msgid "Languages"
msgstr "Traduceri"

#: AppGUI/preferences/general/GeneralAppPrefGroupUI.py:126
msgid "Set the language used throughout FlatCAM."
msgstr "Setează limba folosita pentru textele din FlatCAM."

#: AppGUI/preferences/general/GeneralAppPrefGroupUI.py:132
msgid "Apply Language"
msgstr "Aplica Traducere"

#: AppGUI/preferences/general/GeneralAppPrefGroupUI.py:133
msgid ""
"Set the language used throughout FlatCAM.\n"
"The app will restart after click."
msgstr ""
"Setați limba folosită în FlatCAM.\n"
"Aplicația va reporni după clic."

#: AppGUI/preferences/general/GeneralAppPrefGroupUI.py:147
msgid "Startup Settings"
msgstr "Setări de Pornire"

#: AppGUI/preferences/general/GeneralAppPrefGroupUI.py:151
msgid "Splash Screen"
msgstr "Ecran Pornire"

#: AppGUI/preferences/general/GeneralAppPrefGroupUI.py:153
msgid "Enable display of the splash screen at application startup."
msgstr "Activeaza afisarea unui ecran de pornire la pornirea aplicatiei."

#: AppGUI/preferences/general/GeneralAppPrefGroupUI.py:165
msgid "Sys Tray Icon"
msgstr "Icon in Sys Tray"

#: AppGUI/preferences/general/GeneralAppPrefGroupUI.py:167
msgid "Enable display of FlatCAM icon in Sys Tray."
msgstr "Activare pentru afișarea pictogramei FlatCAM în Sys Tray."

#: AppGUI/preferences/general/GeneralAppPrefGroupUI.py:172
msgid "Show Shell"
msgstr "Arată Shell"

#: AppGUI/preferences/general/GeneralAppPrefGroupUI.py:174
msgid ""
"Check this box if you want the shell to\n"
"start automatically at startup."
msgstr ""
"Bifează in cazul in care se dorește pornirea\n"
"automata a ferestrei Shell (linia de comanda)\n"
"la initializarea aplicaţiei."

#: AppGUI/preferences/general/GeneralAppPrefGroupUI.py:181
msgid "Show Project"
msgstr "Afișați Proiectul"

#: AppGUI/preferences/general/GeneralAppPrefGroupUI.py:183
msgid ""
"Check this box if you want the project/selected/tool tab area to\n"
"to be shown automatically at startup."
msgstr ""
"Bifează aici daca dorești ca zona Notebook să fie\n"
"afișată automat la pornire."

#: AppGUI/preferences/general/GeneralAppPrefGroupUI.py:189
msgid "Version Check"
msgstr "Verificare versiune"

#: AppGUI/preferences/general/GeneralAppPrefGroupUI.py:191
msgid ""
"Check this box if you want to check\n"
"for a new version automatically at startup."
msgstr ""
"Bifează daca se dorește verificarea automata\n"
"daca exista o versiune mai noua,\n"
"la pornirea aplicaţiei."

#: AppGUI/preferences/general/GeneralAppPrefGroupUI.py:198
msgid "Send Statistics"
msgstr "Trimiteți statistici"

#: AppGUI/preferences/general/GeneralAppPrefGroupUI.py:200
msgid ""
"Check this box if you agree to send anonymous\n"
"stats automatically at startup, to help improve FlatCAM."
msgstr ""
"Bifează daca esti de acord ca aplicaţia să trimita la pornire\n"
"un set de informatii cu privire la modul in care folosești\n"
"aplicaţia. In acest fel dezvoltatorii vor sti unde să se focalizeze\n"
"in crearea de inbunatatiri."

#: AppGUI/preferences/general/GeneralAppPrefGroupUI.py:214
msgid "Workers number"
msgstr "Număr de worker's"

#: AppGUI/preferences/general/GeneralAppPrefGroupUI.py:216
msgid ""
"The number of Qthreads made available to the App.\n"
"A bigger number may finish the jobs more quickly but\n"
"depending on your computer speed, may make the App\n"
"unresponsive. Can have a value between 2 and 16.\n"
"Default value is 2.\n"
"After change, it will be applied at next App start."
msgstr ""
"Număarul de QThread-uri care sunt disponibile pt aplicatie.\n"
"Un număr mai mare va permite terminarea operatiilor mai rapida\n"
"dar in functie de cat de rapid este calculatorul, poate face ca aplicatia\n"
"sa devina temporar blocată. Poate lua o valoare intre 2 si 16.\n"
"Valoarea standard este 2.\n"
"Dupa schimbarea valoarii, se va aplica la următoarea pornire a aplicatiei."

#: AppGUI/preferences/general/GeneralAppPrefGroupUI.py:230
msgid "Geo Tolerance"
msgstr "Toleranta geometrică"

#: AppGUI/preferences/general/GeneralAppPrefGroupUI.py:232
msgid ""
"This value can counter the effect of the Circle Steps\n"
"parameter. Default value is 0.005.\n"
"A lower value will increase the detail both in image\n"
"and in Gcode for the circles, with a higher cost in\n"
"performance. Higher value will provide more\n"
"performance at the expense of level of detail."
msgstr ""
"Această valoare afectează efectul prametrului Pasi Cerc.\n"
"Valoarea default este 0.005.\n"
"O valoare mai mică va creste detaliile atat in imagine cat si\n"
"in GCode pentru cercuri dar cu pretul unei scăderi in performantă.\n"
"O valoare mai mare va oferi o performantă crescută dar in\n"
"defavoarea nievelului de detalii."

#: AppGUI/preferences/general/GeneralAppPrefGroupUI.py:252
msgid "Save Settings"
msgstr "Setări pentru Salvare"

#: AppGUI/preferences/general/GeneralAppPrefGroupUI.py:256
msgid "Save Compressed Project"
msgstr "Salvează Proiectul comprimat"

#: AppGUI/preferences/general/GeneralAppPrefGroupUI.py:258
msgid ""
"Whether to save a compressed or uncompressed project.\n"
"When checked it will save a compressed FlatCAM project."
msgstr ""
"Daca să se salveze proiectul in mod arhivat.\n"
"Când este bifat aici, se va salva o arhiva a proiectului\n"
"lucru care poate reduce dimensiunea semnificativ."

#: AppGUI/preferences/general/GeneralAppPrefGroupUI.py:267
msgid "Compression"
msgstr "Compresie"

#: AppGUI/preferences/general/GeneralAppPrefGroupUI.py:269
msgid ""
"The level of compression used when saving\n"
"a FlatCAM project. Higher value means better compression\n"
"but require more RAM usage and more processing time."
msgstr ""
"Nivelul de compresie folosit când se salvează un proiect FlatCAM.\n"
"Valorile posibile sunt [0 ... 9]. Valoarea 0 inseamna compresie minimala\n"
"dar cu consum redus de resurse in timp ce valoarea 9 cere multa memorie RAM\n"
"și in plus, durează semnificativ mai mult."

#: AppGUI/preferences/general/GeneralAppPrefGroupUI.py:280
msgid "Enable Auto Save"
msgstr "Activează Salvarea Automată"

#: AppGUI/preferences/general/GeneralAppPrefGroupUI.py:282
msgid ""
"Check to enable the autosave feature.\n"
"When enabled, the application will try to save a project\n"
"at the set interval."
msgstr ""
"Bifează pentru activarea optiunii de auto-salvare.\n"
"Cand este activate, aplicatia va incereca sa salveze\n"
"proiectul intr-un mod periodic."

#: AppGUI/preferences/general/GeneralAppPrefGroupUI.py:292
msgid "Interval"
msgstr "Interval"

#: AppGUI/preferences/general/GeneralAppPrefGroupUI.py:294
msgid ""
"Time interval for autosaving. In milliseconds.\n"
"The application will try to save periodically but only\n"
"if the project was saved manually at least once.\n"
"While active, some operations may block this feature."
msgstr ""
"Interval periodic pentru autosalvare. In milisecunde.\n"
"Aplicatia va incerca sa salveze periodic doar dacă\n"
"proiectul a fost salvat manual cel putin odată.\n"
"Cand unele operatii sunt active, această capabilitate poate fi sistată."

#: AppGUI/preferences/general/GeneralAppPrefGroupUI.py:310
msgid "Text to PDF parameters"
msgstr "Parametri text la PDF"

#: AppGUI/preferences/general/GeneralAppPrefGroupUI.py:312
msgid "Used when saving text in Code Editor or in FlatCAM Document objects."
msgstr ""
"Utilizat la salvarea textului în Codul Editor sau în obiectele FlatCAM "
"Document."

#: AppGUI/preferences/general/GeneralAppPrefGroupUI.py:321
msgid "Top Margin"
msgstr "Margine Sus"

#: AppGUI/preferences/general/GeneralAppPrefGroupUI.py:323
msgid "Distance between text body and the top of the PDF file."
msgstr "Distanța dintre corpul textului și partea superioară a fișierului PDF."

#: AppGUI/preferences/general/GeneralAppPrefGroupUI.py:334
msgid "Bottom Margin"
msgstr "Margine Jos"

#: AppGUI/preferences/general/GeneralAppPrefGroupUI.py:336
msgid "Distance between text body and the bottom of the PDF file."
msgstr "Distanța dintre corpul textului și partea de jos a fișierului PDF."

#: AppGUI/preferences/general/GeneralAppPrefGroupUI.py:347
msgid "Left Margin"
msgstr "Margine Stânga"

#: AppGUI/preferences/general/GeneralAppPrefGroupUI.py:349
msgid "Distance between text body and the left of the PDF file."
msgstr "Distanța dintre corpul textului și stânga fișierului PDF."

#: AppGUI/preferences/general/GeneralAppPrefGroupUI.py:360
msgid "Right Margin"
msgstr "Margine Dreapta"

#: AppGUI/preferences/general/GeneralAppPrefGroupUI.py:362
msgid "Distance between text body and the right of the PDF file."
msgstr "Distanța dintre corpul textului și dreapta fișierului PDF."

#: AppGUI/preferences/general/GeneralGUIPrefGroupUI.py:26
msgid "GUI Preferences"
msgstr "Preferințe GUI"

#: AppGUI/preferences/general/GeneralGUIPrefGroupUI.py:36
msgid "Theme"
msgstr "Temă"

#: AppGUI/preferences/general/GeneralGUIPrefGroupUI.py:38
msgid ""
"Select a theme for FlatCAM.\n"
"It will theme the plot area."
msgstr ""
"Selectează o Temă pentru FlatCAM.\n"
"Va afecta zona de afisare."

#: AppGUI/preferences/general/GeneralGUIPrefGroupUI.py:43
msgid "Light"
msgstr "Luminos"

#: AppGUI/preferences/general/GeneralGUIPrefGroupUI.py:44
msgid "Dark"
msgstr "Întunecat"

#: AppGUI/preferences/general/GeneralGUIPrefGroupUI.py:51
msgid "Use Gray Icons"
msgstr "Utilizați pictogramele gri"

#: AppGUI/preferences/general/GeneralGUIPrefGroupUI.py:53
msgid ""
"Check this box to use a set of icons with\n"
"a lighter (gray) color. To be used when a\n"
"full dark theme is applied."
msgstr ""
"Bifează această casetă pentru a utiliza un set de pictograme cu\n"
"o culoare mai deschisă (gri). Pentru a fi utilizat atunci când\n"
"se aplică o temă complet întunecată."

#: AppGUI/preferences/general/GeneralGUIPrefGroupUI.py:73
msgid "Layout"
msgstr "Amplasare"

#: AppGUI/preferences/general/GeneralGUIPrefGroupUI.py:75
msgid ""
"Select an layout for FlatCAM.\n"
"It is applied immediately."
msgstr ""
"Selectează un stil de amplasare a elementelor GUI in FlatCAM.\n"
"Se aplică imediat."

#: AppGUI/preferences/general/GeneralGUIPrefGroupUI.py:95
msgid "Style"
msgstr "Stil"

#: AppGUI/preferences/general/GeneralGUIPrefGroupUI.py:97
msgid ""
"Select an style for FlatCAM.\n"
"It will be applied at the next app start."
msgstr ""
"Selectează un stil pentru FlatCAM.\n"
"Se va aplic la următoarea pornire a aplicaţiei."

#: AppGUI/preferences/general/GeneralGUIPrefGroupUI.py:111
msgid "Activate HDPI Support"
msgstr "Activați HDPI"

#: AppGUI/preferences/general/GeneralGUIPrefGroupUI.py:113
msgid ""
"Enable High DPI support for FlatCAM.\n"
"It will be applied at the next app start."
msgstr ""
"Activează capabilitatea de DPI cu valoare mare.\n"
"Util pentru monitoarele 4k.\n"
"Va fi aplicată la următoarea pornire a aplicaţiei."

#: AppGUI/preferences/general/GeneralGUIPrefGroupUI.py:127
msgid "Display Hover Shape"
msgstr "Afișează forma Hover"

#: AppGUI/preferences/general/GeneralGUIPrefGroupUI.py:129
msgid ""
"Enable display of a hover shape for FlatCAM objects.\n"
"It is displayed whenever the mouse cursor is hovering\n"
"over any kind of not-selected object."
msgstr ""
"Activează o formă când se tine mouse-ul deasupra unui obiect\n"
"in canvas-ul FlatCAM. Forma este afișată doar dacă obiectul \n"
"nu este selectat."

#: AppGUI/preferences/general/GeneralGUIPrefGroupUI.py:136
msgid "Display Selection Shape"
msgstr "Afișați forma de selecție"

#: AppGUI/preferences/general/GeneralGUIPrefGroupUI.py:138
msgid ""
"Enable the display of a selection shape for FlatCAM objects.\n"
"It is displayed whenever the mouse selects an object\n"
"either by clicking or dragging mouse from left to right or\n"
"right to left."
msgstr ""
"Activează o formă de selectie pt obiectele FlatCAM.\n"
"Se afisează când mouse-ul selectează un obiect\n"
"pe canvas-ul FlatCAM fie făcând click pe obiect fie prin\n"
"crearea unei ferestre de selectie."

#: AppGUI/preferences/general/GeneralGUIPrefGroupUI.py:151
msgid "Left-Right Selection Color"
msgstr "Culoare de selecție stânga-dreapta"

#: AppGUI/preferences/general/GeneralGUIPrefGroupUI.py:156
msgid "Set the line color for the 'left to right' selection box."
msgstr ""
"Setează transparenţa conturului formei de selecţie\n"
"când selectia se face de la stânga la dreapta."

#: AppGUI/preferences/general/GeneralGUIPrefGroupUI.py:172
msgid ""
"Set the fill color for the selection box\n"
"in case that the selection is done from left to right.\n"
"First 6 digits are the color and the last 2\n"
"digits are for alpha (transparency) level."
msgstr ""
"Setează culoarea pentru forma de selectare in cazul\n"
"in care selectia se face de la stânga la dreapta.\n"
"Primii 6 digiti sunt culoarea efectivă și ultimii\n"
"doi sunt pentru nivelul de transparenţă (alfa)."

#: AppGUI/preferences/general/GeneralGUIPrefGroupUI.py:192
msgid "Set the fill transparency for the 'left to right' selection box."
msgstr ""
"Setează transparenţa formei de selecţie când selectia\n"
"se face de la stânga la dreapta."

#: AppGUI/preferences/general/GeneralGUIPrefGroupUI.py:216
msgid "Right-Left Selection Color"
msgstr "Culoare de selecție dreapta-stânga"

#: AppGUI/preferences/general/GeneralGUIPrefGroupUI.py:222
msgid "Set the line color for the 'right to left' selection box."
msgstr ""
"Setează transparenţa conturului formei de selecţie\n"
"când selectia se face de la dreapta la stânga."

#: AppGUI/preferences/general/GeneralGUIPrefGroupUI.py:239
msgid ""
"Set the fill color for the selection box\n"
"in case that the selection is done from right to left.\n"
"First 6 digits are the color and the last 2\n"
"digits are for alpha (transparency) level."
msgstr ""
"Setează culoarea pentru forma de selectare in cazul\n"
"in care selectia se face de la dreapta la stânga.\n"
"Primii 6 digiti sunt culoarea efectiva și ultimii\n"
"doi sunt pentru nivelul de transparenţă (alfa)."

#: AppGUI/preferences/general/GeneralGUIPrefGroupUI.py:259
msgid "Set the fill transparency for selection 'right to left' box."
msgstr ""
"Setează transparenţa formei de selecţie când selectia\n"
"se face de la dreapta la stânga."

#: AppGUI/preferences/general/GeneralGUIPrefGroupUI.py:286
msgid "Editor Color"
msgstr "Culoare editor"

#: AppGUI/preferences/general/GeneralGUIPrefGroupUI.py:290
msgid "Drawing"
msgstr "Desen"

#: AppGUI/preferences/general/GeneralGUIPrefGroupUI.py:292
msgid "Set the color for the shape."
msgstr "Setează culoarea pentru forma geometrică din Editor."

#: AppGUI/preferences/general/GeneralGUIPrefGroupUI.py:309
msgid "Set the color of the shape when selected."
msgstr ""
"Setează culoarea formei geometrice in Editor\n"
"când se face o selecţie."

#: AppGUI/preferences/general/GeneralGUIPrefGroupUI.py:332
msgid "Project Items Color"
msgstr "Culoarea articolelor din Proiect"

#: AppGUI/preferences/general/GeneralGUIPrefGroupUI.py:336
msgid "Enabled"
msgstr "Activat"

#: AppGUI/preferences/general/GeneralGUIPrefGroupUI.py:338
msgid "Set the color of the items in Project Tab Tree."
msgstr "Setează culoarea elementelor din tab-ul Proiect."

#: AppGUI/preferences/general/GeneralGUIPrefGroupUI.py:352
msgid "Disabled"
msgstr "Dezactivat"

#: AppGUI/preferences/general/GeneralGUIPrefGroupUI.py:354
msgid ""
"Set the color of the items in Project Tab Tree,\n"
"for the case when the items are disabled."
msgstr ""
"Setează culoarea elementelor din tab-ul Proiect\n"
"in cazul in care elementele sunt dezactivate."

#: AppGUI/preferences/general/GeneralGUIPrefGroupUI.py:370
msgid "Project AutoHide"
msgstr "Ascundere Proiect"

#: AppGUI/preferences/general/GeneralGUIPrefGroupUI.py:372
msgid ""
"Check this box if you want the project/selected/tool tab area to\n"
"hide automatically when there are no objects loaded and\n"
"to show whenever a new object is created."
msgstr ""
"Bifează daca dorești ca zona Notebook să fie ascunsă automat\n"
"când nu sunt obiecte incărcate și să fie afișată automat\n"
"când un obiect nou este creat/incărcat."

#: AppGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:27
msgid "Geometry Adv. Options"
msgstr "Opțiuni Avans. Geometrie"

#: AppGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:35
msgid ""
"A list of Geometry advanced parameters.\n"
"Those parameters are available only for\n"
"Advanced App. Level."
msgstr ""
"O lista de parametri Geometrie avansati.\n"
"Acesti parametri sunt disponibili doar\n"
"când este selectat Nivelul Avansat pentru\n"
"aplicaţie in Preferințe - > General."

#: AppGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:45
#: AppGUI/preferences/tools/Tools2CalPrefGroupUI.py:112
#: AppGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:134
#: AppTools/ToolCalibration.py:125 AppTools/ToolSolderPaste.py:240
msgid "Toolchange X-Y"
msgstr "X,Y schimb. unealtă"

#: AppGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:56
msgid ""
"Height of the tool just after starting the work.\n"
"Delete the value if you don't need this feature."
msgstr ""
"Înălţimea uneltei la care se gaseste la inceputul lucrului.\n"
"Lasa câmpul gol daca nu folosești aceasta."

#: AppGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:158
msgid "Segment X size"
msgstr "Dim. seg X"

#: AppGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:160
msgid ""
"The size of the trace segment on the X axis.\n"
"Useful for auto-leveling.\n"
"A value of 0 means no segmentation on the X axis."
msgstr ""
"Dimensiunea segmentului de traseu pe axa X.\n"
"Folositor pentru auto-nivelare.\n"
"O valoare de 0 inseamnaca nu se face segmentare\n"
"pe axa X."

#: AppGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:174
msgid "Segment Y size"
msgstr "Dim. seg Y"

#: AppGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:176
msgid ""
"The size of the trace segment on the Y axis.\n"
"Useful for auto-leveling.\n"
"A value of 0 means no segmentation on the Y axis."
msgstr ""
"Dimensiunea segmentului de traseu pe axa Y.\n"
"Folositor pentru auto-nivelare.\n"
"O valoare de 0 inseamnaca nu se face segmentare\n"
"pe axa Y."

#: AppGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:192
msgid "Area Exclusion"
msgstr "Zonă de Excludere"

#: AppGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:194
msgid ""
"Area exclusion parameters.\n"
"Those parameters are available only for\n"
"Advanced App. Level."
msgstr ""
"Parametrii Excludere Zonă.\n"
"Acesti parametri sunt disponibili doar\n"
"când este selectat Nivelul Avansat pentru\n"
"aplicaţie in Preferințe - > General."

#: AppGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:201
msgid "Exclusion areas"
msgstr "Zone de Excludere"

#: AppGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:212
#: AppGUI/preferences/tools/ToolsNCCPrefGroupUI.py:322
#: AppGUI/preferences/tools/ToolsPaintPrefGroupUI.py:286
#: AppTools/ToolNCC.py:578 AppTools/ToolPaint.py:521
msgid "Shape"
msgstr "Formă"

#: AppGUI/preferences/geometry/GeometryEditorPrefGroupUI.py:33
msgid "A list of Geometry Editor parameters."
msgstr "O lista de parametri ai Editorului de Geometrii."

#: AppGUI/preferences/geometry/GeometryEditorPrefGroupUI.py:43
#: AppGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:196
msgid ""
"Set the number of selected geometry\n"
"items above which the utility geometry\n"
"becomes just a selection rectangle.\n"
"Increases the performance when moving a\n"
"large number of geometric elements."
msgstr ""
"Setează numărul de geometriil selectate peste care\n"
"geometria utilitară devine o simplă formă pătratica de \n"
"selectie.\n"
"Creste performanta cand se muta un număr mai mare de \n"
"elemente geometrice."

#: AppGUI/preferences/geometry/GeometryGenPrefGroupUI.py:27
msgid "Geometry General"
msgstr "Geometrie General"

#: AppGUI/preferences/geometry/GeometryGenPrefGroupUI.py:49
msgid ""
"The number of circle steps for <b>Geometry</b> \n"
"circle and arc shapes linear approximation."
msgstr ""
"Numărul de segmente utilizate pentru\n"
"aproximarea lineara a <b>Geometriilor</b> circulare."

#: AppGUI/preferences/geometry/GeometryGenPrefGroupUI.py:63
#: AppGUI/preferences/tools/ToolsNCCPrefGroupUI.py:41
#: AppGUI/preferences/tools/ToolsPaintPrefGroupUI.py:48
#: AppGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:42
msgid "Tools Dia"
msgstr "Dia Unealtă"

#: AppGUI/preferences/geometry/GeometryGenPrefGroupUI.py:65
#: AppGUI/preferences/gerber/GerberEditorPrefGroupUI.py:108
#: AppGUI/preferences/tools/ToolsNCCPrefGroupUI.py:43
#: AppGUI/preferences/tools/ToolsPaintPrefGroupUI.py:50
#: AppGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:44
msgid ""
"Diameters of the tools, separated by comma.\n"
"The value of the diameter has to use the dot decimals separator.\n"
"Valid values: 0.3, 1.0"
msgstr ""
"Diametrele uneltelor separate cu virgulă.\n"
"Valoarea diametrului trebuie sa folosească punctul ca si separator zecimal.\n"
"Valori valide: 0.3, 1.0"

#: AppGUI/preferences/geometry/GeometryGenPrefGroupUI.py:80
msgid "Geometry Object Color"
msgstr "Culoare obiect Geometrie"

#: AppGUI/preferences/geometry/GeometryOptPrefGroupUI.py:28
msgid "Geometry Options"
msgstr "Opțiuni Geometrie"

#: AppGUI/preferences/geometry/GeometryOptPrefGroupUI.py:36
msgid ""
"Create a CNC Job object\n"
"tracing the contours of this\n"
"Geometry object."
msgstr ""
"Crează un obiect CNCJob care urmăreste conturul\n"
"acestui obiect tip Geometrie."

#: AppGUI/preferences/geometry/GeometryOptPrefGroupUI.py:80
msgid "Depth/Pass"
msgstr "Adânc./Trecere"

#: AppGUI/preferences/geometry/GeometryOptPrefGroupUI.py:82
msgid ""
"The depth to cut on each pass,\n"
"when multidepth is enabled.\n"
"It has positive value although\n"
"it is a fraction from the depth\n"
"which has negative value."
msgstr ""
"Adâncimea la care se taie la fiecare trecere,\n"
"atunci când >MultiPas< este folosit.\n"
"Valoarea este pozitivă desi reprezinta o fracţie\n"
"a adancimii de tăiere care este o valoare negativă."

#: AppGUI/preferences/gerber/GerberAdvOptPrefGroupUI.py:27
msgid "Gerber Adv. Options"
msgstr "Opțiuni Av. Gerber"

#: AppGUI/preferences/gerber/GerberAdvOptPrefGroupUI.py:33
msgid ""
"A list of Gerber advanced parameters.\n"
"Those parameters are available only for\n"
"Advanced App. Level."
msgstr ""
"O lista de parametri Gerber avansati.\n"
"Acesti parametri sunt disponibili doar\n"
"când este selectat Nivelul Avansat pentru\n"
"aplicaţie in Preferințe - > General."

#: AppGUI/preferences/gerber/GerberAdvOptPrefGroupUI.py:52
msgid "Table Show/Hide"
msgstr "Arata/Ascunde Tabela"

#: AppGUI/preferences/gerber/GerberAdvOptPrefGroupUI.py:54
msgid ""
"Toggle the display of the Gerber Apertures Table.\n"
"Also, on hide, it will delete all mark shapes\n"
"that are drawn on canvas."
msgstr ""
"Comută afișarea tabelei de aperturi Gerber.\n"
"când se ascunde aceasta, se vor șterge și toate\n"
"posibil afisatele marcaje ale aperturilor."

#: AppGUI/preferences/gerber/GerberAdvOptPrefGroupUI.py:134
msgid "Exterior"
msgstr "Exterior"

#: AppGUI/preferences/gerber/GerberAdvOptPrefGroupUI.py:135
msgid "Interior"
msgstr "Interior"

#: AppGUI/preferences/gerber/GerberAdvOptPrefGroupUI.py:146
#: AppObjects/FlatCAMGerber.py:497 AppTools/ToolCopperThieving.py:1022
#: AppTools/ToolCopperThieving.py:1211 AppTools/ToolCopperThieving.py:1223
#: AppTools/ToolNCC.py:2059 AppTools/ToolNCC.py:2170 AppTools/ToolNCC.py:2185
#: AppTools/ToolNCC.py:3149 AppTools/ToolNCC.py:3254 AppTools/ToolNCC.py:3269
#: AppTools/ToolNCC.py:3535 AppTools/ToolNCC.py:3636 AppTools/ToolNCC.py:3651
#: camlib.py:982
msgid "Buffering"
msgstr "Buferare"

#: AppGUI/preferences/gerber/GerberAdvOptPrefGroupUI.py:148
msgid ""
"Buffering type:\n"
"- None --> best performance, fast file loading but no so good display\n"
"- Full --> slow file loading but good visuals. This is the default.\n"
"<<WARNING>>: Don't change this unless you know what you are doing !!!"
msgstr ""
"Tip de buferare:\n"
"- Nimic --> performanta superioară, incărcare rapidă a fisierului dar "
"afisarea nu este prea bună\n"
"- Complet --> incărcare lentă dar calitate vizuală bună. Aceasta este "
"valoarea de bază.\n"
"<<ATENTIE>>: Nu schimba această valoare decat dacă stii ce faci !!!"

#: AppGUI/preferences/gerber/GerberAdvOptPrefGroupUI.py:153
#: AppGUI/preferences/tools/Tools2FiducialsPrefGroupUI.py:88
#: AppGUI/preferences/tools/ToolsFilmPrefGroupUI.py:207
#: AppTools/ToolFiducials.py:201 AppTools/ToolFilm.py:238
#: AppTools/ToolProperties.py:452 AppTools/ToolProperties.py:455
#: AppTools/ToolProperties.py:458 AppTools/ToolProperties.py:483
msgid "None"
msgstr "Nimic"

#: AppGUI/preferences/gerber/GerberAdvOptPrefGroupUI.py:159
msgid "Simplify"
msgstr "Simplifica"

#: AppGUI/preferences/gerber/GerberAdvOptPrefGroupUI.py:161
msgid ""
"When checked all the Gerber polygons will be\n"
"loaded with simplification having a set tolerance.\n"
"<<WARNING>>: Don't change this unless you know what you are doing !!!"
msgstr ""
"Când este bifat, toate poligoanele Gerber vor fi\n"
"încărcate simplificat cu o toleranță stabilită.\n"
"<<AVERTISMENT>>: Nu schimbați acest lucru decât dacă știți ce faceți !!!"

#: AppGUI/preferences/gerber/GerberAdvOptPrefGroupUI.py:168
msgid "Tolerance"
msgstr "Toleranta"

#: AppGUI/preferences/gerber/GerberAdvOptPrefGroupUI.py:169
msgid "Tolerance for polygon simplification."
msgstr "Toleranță pentru simplificarea poligoanelor."

#: AppGUI/preferences/gerber/GerberEditorPrefGroupUI.py:33
msgid "A list of Gerber Editor parameters."
msgstr "O listă de parametri ai Editorului Gerber."

#: AppGUI/preferences/gerber/GerberEditorPrefGroupUI.py:43
msgid ""
"Set the number of selected Gerber geometry\n"
"items above which the utility geometry\n"
"becomes just a selection rectangle.\n"
"Increases the performance when moving a\n"
"large number of geometric elements."
msgstr ""
"Setează numărul de geometrii selectate peste care\n"
"geometria utilitară devine un simplu pătrat de selectie.\n"
"Creste performanta cand se mută un număr mai mare\n"
"de elemente geometrice."

#: AppGUI/preferences/gerber/GerberEditorPrefGroupUI.py:56
msgid "New Aperture code"
msgstr "Cod pt aperture noua"

#: AppGUI/preferences/gerber/GerberEditorPrefGroupUI.py:69
msgid "New Aperture size"
msgstr "Dim. pt aperture noua"

#: AppGUI/preferences/gerber/GerberEditorPrefGroupUI.py:71
msgid "Size for the new aperture"
msgstr "Dim. pentru noua apertură"

#: AppGUI/preferences/gerber/GerberEditorPrefGroupUI.py:82
msgid "New Aperture type"
msgstr "Tip pt noua apaertura"

#: AppGUI/preferences/gerber/GerberEditorPrefGroupUI.py:84
msgid ""
"Type for the new aperture.\n"
"Can be 'C', 'R' or 'O'."
msgstr ""
"Tipul noii aperture.\n"
"Poate fi „C”, „R” sau „O”."

#: AppGUI/preferences/gerber/GerberEditorPrefGroupUI.py:106
msgid "Aperture Dimensions"
msgstr "Dim. aper"

#: AppGUI/preferences/gerber/GerberEditorPrefGroupUI.py:116
msgid "Linear Pad Array"
msgstr "Arie Lineară de Sloturi"

#: AppGUI/preferences/gerber/GerberEditorPrefGroupUI.py:160
msgid "Circular Pad Array"
msgstr "Arie de Sloturi circ"

#: AppGUI/preferences/gerber/GerberEditorPrefGroupUI.py:196
msgid "Distance at which to buffer the Gerber element."
msgstr "Distanța la care se bufferează elementul Gerber."

#: AppGUI/preferences/gerber/GerberEditorPrefGroupUI.py:205
msgid "Scale Tool"
msgstr "Unalta de Scalare"

#: AppGUI/preferences/gerber/GerberEditorPrefGroupUI.py:211
msgid "Factor to scale the Gerber element."
msgstr "Factor pentru scalarea elementului Gerber."

#: AppGUI/preferences/gerber/GerberEditorPrefGroupUI.py:224
msgid "Threshold low"
msgstr "Prag minim"

#: AppGUI/preferences/gerber/GerberEditorPrefGroupUI.py:226
msgid "Threshold value under which the apertures are not marked."
msgstr "Valoarea pragului sub care aperturile nu sunt marcate."

#: AppGUI/preferences/gerber/GerberEditorPrefGroupUI.py:236
msgid "Threshold high"
msgstr "Prag mare"

#: AppGUI/preferences/gerber/GerberEditorPrefGroupUI.py:238
msgid "Threshold value over which the apertures are not marked."
msgstr "Valoarea pragului peste care nu sunt marcate aperturile."

#: AppGUI/preferences/gerber/GerberExpPrefGroupUI.py:27
msgid "Gerber Export"
msgstr "Export Gerber"

#: AppGUI/preferences/gerber/GerberExpPrefGroupUI.py:33
msgid ""
"The parameters set here are used in the file exported\n"
"when using the File -> Export -> Export Gerber menu entry."
msgstr ""
"Acesti parametri listati aici sunt folositi atunci când\n"
"se exporta un fişier Gerber folosind:\n"
"File -> Exportă -> Exportă Gerber."

#: AppGUI/preferences/gerber/GerberExpPrefGroupUI.py:44
#: AppGUI/preferences/gerber/GerberExpPrefGroupUI.py:50
#: AppGUI/preferences/gerber/GerberGenPrefGroupUI.py:84
#: AppGUI/preferences/gerber/GerberGenPrefGroupUI.py:90
msgid "The units used in the Gerber file."
msgstr "Unitătile de măsură folosite in fişierul Gerber."

#: AppGUI/preferences/gerber/GerberExpPrefGroupUI.py:58
msgid ""
"The number of digits in the whole part of the number\n"
"and in the fractional part of the number."
msgstr ""
"Acest număr reprezinta numărul de digiti din partea\n"
"intreagă si in partea fractională a numărului."

#: AppGUI/preferences/gerber/GerberExpPrefGroupUI.py:71
msgid ""
"This numbers signify the number of digits in\n"
"the whole part of Gerber coordinates."
msgstr ""
"Acest număr reprezinta numărul de digiti din partea\n"
"intreagă a coordonatelor Gerber."

#: AppGUI/preferences/gerber/GerberExpPrefGroupUI.py:87
msgid ""
"This numbers signify the number of digits in\n"
"the decimal part of Gerber coordinates."
msgstr ""
"Acest număr reprezinta numărul de digiti din partea\n"
"zecimală a coordonatelor Gerber."

#: AppGUI/preferences/gerber/GerberExpPrefGroupUI.py:99
#: AppGUI/preferences/gerber/GerberExpPrefGroupUI.py:109
#: AppGUI/preferences/gerber/GerberGenPrefGroupUI.py:100
#: AppGUI/preferences/gerber/GerberGenPrefGroupUI.py:110
msgid ""
"This sets the type of Gerber zeros.\n"
"If LZ then Leading Zeros are removed and\n"
"Trailing Zeros are kept.\n"
"If TZ is checked then Trailing Zeros are removed\n"
"and Leading Zeros are kept."
msgstr ""
"Aici se setează tipul de suprimare a zerourilor,\n"
"in cazul unui fişier Gerber.\n"
"TZ = zerourile din fata numărului sunt păstrate și\n"
"cele de la final sunt indepărtate.\n"
"LZ = zerourile din fata numărului sunt indepărtate și\n"
"cele de la final sunt păstrate.\n"
"(Invers fată de fişierele Excellon)."

#: AppGUI/preferences/gerber/GerberGenPrefGroupUI.py:27
msgid "Gerber General"
msgstr "Gerber General"

#: AppGUI/preferences/gerber/GerberGenPrefGroupUI.py:45
msgid "M-Color"
msgstr "M-Color"

#: AppGUI/preferences/gerber/GerberGenPrefGroupUI.py:61
msgid ""
"The number of circle steps for Gerber \n"
"circular aperture linear approximation."
msgstr ""
"Numărul de segmente utilizate pentru\n"
"aproximarea lineara a aperturilor Gerber circulare."

#: AppGUI/preferences/gerber/GerberGenPrefGroupUI.py:73
msgid "Default Values"
msgstr "Val. Implicite"

#: AppGUI/preferences/gerber/GerberGenPrefGroupUI.py:75
msgid ""
"Those values will be used as fallback values\n"
"in case that they are not found in the Gerber file."
msgstr ""
"Aceste valori vor fi utilizate ca valori de baza\n"
"în cazul în care acestea nu sunt găsite în fișierul Gerber."

#: AppGUI/preferences/gerber/GerberGenPrefGroupUI.py:126
msgid "Clean Apertures"
msgstr "Curățați Aperturile"

#: AppGUI/preferences/gerber/GerberGenPrefGroupUI.py:128
msgid ""
"Will remove apertures that do not have geometry\n"
"thus lowering the number of apertures in the Gerber object."
msgstr ""
"Va elimina Aperturile care nu au geometrie\n"
"scăzând astfel numărul de aperturi în obiectul Gerber."

#: AppGUI/preferences/gerber/GerberGenPrefGroupUI.py:134
msgid "Polarity change buffer"
msgstr "Tampon la Schimbarea polarității"

#: AppGUI/preferences/gerber/GerberGenPrefGroupUI.py:136
msgid ""
"Will apply extra buffering for the\n"
"solid geometry when we have polarity changes.\n"
"May help loading Gerber files that otherwise\n"
"do not load correctly."
msgstr ""
"Vor aplica un buffering suplimentar pentru\n"
"geometrie solidă când avem schimbări de polaritate.\n"
"Poate ajuta la încărcarea fișierelor Gerber care altfel\n"
"nu se încarcă corect."

#: AppGUI/preferences/gerber/GerberGenPrefGroupUI.py:149
msgid "Gerber Object Color"
msgstr "Culoare obiect Gerber"

#: AppGUI/preferences/gerber/GerberOptPrefGroupUI.py:29
msgid "Gerber Options"
msgstr "Opțiuni Gerber"

#: AppGUI/preferences/gerber/GerberOptPrefGroupUI.py:107
msgid "Combine Passes"
msgstr "Combina"

#: AppGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:27
msgid "Copper Thieving Tool Options"
msgstr "Opțiunile Uneltei Copper Thieving"

#: AppGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:39
msgid ""
"A tool to generate a Copper Thieving that can be added\n"
"to a selected Gerber file."
msgstr ""
"Un instrument pentru a genera o Copper Thieving care poate fi adăugat\n"
"la un fișier Gerber selectat."

#: AppGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:47
msgid "Number of steps (lines) used to interpolate circles."
msgstr "Numărul de pași (linii) utilizate pentru interpolarea cercurilor."

#: AppGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:57
#: AppGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:261
#: AppTools/ToolCopperThieving.py:96 AppTools/ToolCopperThieving.py:431
msgid "Clearance"
msgstr "Degajare"

#: AppGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:59
msgid ""
"This set the distance between the copper Thieving components\n"
"(the polygon fill may be split in multiple polygons)\n"
"and the copper traces in the Gerber file."
msgstr ""
"Acest lucru a stabilit distanța dintre componentele Copper Thieving\n"
"(umplutura poligonului poate fi împărțită în mai multe poligoane)\n"
"si traseele de cupru din fisierul Gerber."

#: AppGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:86
#: AppGUI/preferences/tools/ToolsNCCPrefGroupUI.py:309
#: AppTools/ToolCopperThieving.py:125 AppTools/ToolNCC.py:535
#: AppTools/ToolNCC.py:1306 AppTools/ToolNCC.py:1635 AppTools/ToolNCC.py:1928
#: AppTools/ToolNCC.py:1992 AppTools/ToolNCC.py:3013 AppTools/ToolNCC.py:3022
#: defaults.py:406 tclCommands/TclCommandCopperClear.py:190
msgid "Itself"
msgstr "Însuşi"

#: AppGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:87
#: AppGUI/preferences/tools/ToolsNCCPrefGroupUI.py:309
#: AppGUI/preferences/tools/ToolsPaintPrefGroupUI.py:280
#: AppTools/ToolCopperThieving.py:126 AppTools/ToolNCC.py:535
#: AppTools/ToolNCC.py:1316 AppTools/ToolNCC.py:1648 AppTools/ToolNCC.py:1944
#: AppTools/ToolNCC.py:1999 AppTools/ToolPaint.py:485 AppTools/ToolPaint.py:945
#: AppTools/ToolPaint.py:1451
msgid "Area Selection"
msgstr "Selecţie zonă"

#: AppGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:88
#: AppGUI/preferences/tools/ToolsNCCPrefGroupUI.py:309
#: AppGUI/preferences/tools/ToolsPaintPrefGroupUI.py:280
#: AppTools/ToolCopperThieving.py:127 AppTools/ToolDblSided.py:216
#: AppTools/ToolNCC.py:535 AppTools/ToolNCC.py:1664 AppTools/ToolNCC.py:1950
#: AppTools/ToolNCC.py:2007 AppTools/ToolNCC.py:2383 AppTools/ToolNCC.py:2631
#: AppTools/ToolNCC.py:3058 AppTools/ToolPaint.py:485 AppTools/ToolPaint.py:930
#: AppTools/ToolPaint.py:1467 tclCommands/TclCommandCopperClear.py:192
#: tclCommands/TclCommandPaint.py:166
msgid "Reference Object"
msgstr "Obiect Ref"

#: AppGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:90
#: AppTools/ToolCopperThieving.py:129
msgid "Reference:"
msgstr "Referinţă:"

#: AppGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:92
msgid ""
"- 'Itself' - the copper Thieving extent is based on the object extent.\n"
"- 'Area Selection' - left mouse click to start selection of the area to be "
"filled.\n"
"- 'Reference Object' - will do copper thieving within the area specified by "
"another object."
msgstr ""
"- „Însuși” - dimensiunea Copper Thieving se bazează pe obiectul care este "
"curățat de cupru.\n"
"- „Selecție zonă” - faceți clic stânga cu mouse-ul pentru a începe selecția "
"zonei de completat.\n"
"- „Obiect de referință” - va face Copper Thieving în zona specificată de un "
"alt obiect."

#: AppGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:101
#: AppGUI/preferences/tools/Tools2EDrillsPrefGroupUI.py:76
#: AppGUI/preferences/tools/Tools2EDrillsPrefGroupUI.py:188
#: AppGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:76
#: AppGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:190
#: AppTools/ToolCopperThieving.py:171 AppTools/ToolExtractDrills.py:102
#: AppTools/ToolExtractDrills.py:240 AppTools/ToolPunchGerber.py:113
#: AppTools/ToolPunchGerber.py:268
msgid "Rectangular"
msgstr "Patrulater"

#: AppGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:102
#: AppTools/ToolCopperThieving.py:172
msgid "Minimal"
msgstr "Minimal"

#: AppGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:104
#: AppTools/ToolCopperThieving.py:174 AppTools/ToolFilm.py:94
msgid "Box Type:"
msgstr "Tip container:"

#: AppGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:106
#: AppTools/ToolCopperThieving.py:176
msgid ""
"- 'Rectangular' - the bounding box will be of rectangular shape.\n"
"- 'Minimal' - the bounding box will be the convex hull shape."
msgstr ""
"- „Dreptunghiular” - caseta de delimitare va avea o formă dreptunghiulară.\n"
"- „Minimal” - caseta de delimitare va fi forma arie convexă."

#: AppGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:120
#: AppTools/ToolCopperThieving.py:192
msgid "Dots Grid"
msgstr "Grilă de puncte"

#: AppGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:121
#: AppTools/ToolCopperThieving.py:193
msgid "Squares Grid"
msgstr "Grilă de pătrate"

#: AppGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:122
#: AppTools/ToolCopperThieving.py:194
msgid "Lines Grid"
msgstr "Grilă de linii"

#: AppGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:124
#: AppTools/ToolCopperThieving.py:196
msgid "Fill Type:"
msgstr "Tip de umplere:"

#: AppGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:126
#: AppTools/ToolCopperThieving.py:198
msgid ""
"- 'Solid' - copper thieving will be a solid polygon.\n"
"- 'Dots Grid' - the empty area will be filled with a pattern of dots.\n"
"- 'Squares Grid' - the empty area will be filled with a pattern of squares.\n"
"- 'Lines Grid' - the empty area will be filled with a pattern of lines."
msgstr ""
"- „Solid” - Copper Thieving va fi un poligon solid.\n"
"- „Grilă de puncte” - zona goală va fi umplută cu un model de puncte.\n"
"- „Grilă de pătrate” - zona goală va fi umplută cu un model de pătrate.\n"
"- „Grilă de linii” - zona goală va fi umplută cu un model de linii."

#: AppGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:134
#: AppTools/ToolCopperThieving.py:217
msgid "Dots Grid Parameters"
msgstr "Parametri grilă puncte"

#: AppGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:140
#: AppTools/ToolCopperThieving.py:223
msgid "Dot diameter in Dots Grid."
msgstr "Diametrul punctului în Grila de Puncte."

#: AppGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:151
#: AppGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:180
#: AppGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:209
#: AppTools/ToolCopperThieving.py:234 AppTools/ToolCopperThieving.py:274
#: AppTools/ToolCopperThieving.py:314
msgid "Spacing"
msgstr "Spaţiere"

#: AppGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:153
#: AppTools/ToolCopperThieving.py:236
msgid "Distance between each two dots in Dots Grid."
msgstr "Distanța dintre fiecare două puncte din Grila de Puncte."

#: AppGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:163
#: AppTools/ToolCopperThieving.py:257
msgid "Squares Grid Parameters"
msgstr "Parametri grilă de patrate"

#: AppGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:169
#: AppTools/ToolCopperThieving.py:263
msgid "Square side size in Squares Grid."
msgstr "Dimensiunea pătratului în Grila de Pătrate."

#: AppGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:182
#: AppTools/ToolCopperThieving.py:276
msgid "Distance between each two squares in Squares Grid."
msgstr "Distanța dintre fiecare două pătrate din Grila Pătrate."

#: AppGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:192
#: AppTools/ToolCopperThieving.py:297
msgid "Lines Grid Parameters"
msgstr "Parametri grilă de linii"

#: AppGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:198
#: AppTools/ToolCopperThieving.py:303
msgid "Line thickness size in Lines Grid."
msgstr "Mărimea grosimii liniei în Grila de linii."

#: AppGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:211
#: AppTools/ToolCopperThieving.py:316
msgid "Distance between each two lines in Lines Grid."
msgstr "Distanța dintre fiecare două linii în Grial de linii."

#: AppGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:221
#: AppTools/ToolCopperThieving.py:354
msgid "Robber Bar Parameters"
msgstr "Parametri pentru Robber Bar"

#: AppGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:223
#: AppTools/ToolCopperThieving.py:356
msgid ""
"Parameters used for the robber bar.\n"
"Robber bar = copper border to help in pattern hole plating."
msgstr ""
"Parametrii folosiți pentru Robber Bar.\n"
"Robber Bar = bordura de cupru pentru a ajuta la placarea de găuri, cu model."

#: AppGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:231
#: AppTools/ToolCopperThieving.py:364
msgid "Bounding box margin for robber bar."
msgstr ""
"Marginea pentru forma înconjurătoare\n"
"a Robber Bar."

#: AppGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:242
#: AppGUI/preferences/tools/ToolsCornersPrefGroupUI.py:42
#: AppTools/ToolCopperThieving.py:375 AppTools/ToolCorners.py:113
msgid "Thickness"
msgstr "Grosime"

#: AppGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:244
#: AppTools/ToolCopperThieving.py:377
msgid "The robber bar thickness."
msgstr "Grosimea Robber Bar."

#: AppGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:254
#: AppTools/ToolCopperThieving.py:408
msgid "Pattern Plating Mask"
msgstr "Masca de placare cu model"

#: AppGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:256
#: AppTools/ToolCopperThieving.py:410
msgid "Generate a mask for pattern plating."
msgstr "Generați o mască pentru placarea cu model."

#: AppGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:263
#: AppTools/ToolCopperThieving.py:433
msgid ""
"The distance between the possible copper thieving elements\n"
"and/or robber bar and the actual openings in the mask."
msgstr ""
"Distanța dintre posibilele elemente Copper Thieving\n"
"și / sau Robber Bar și deschiderile efective ale măștii."

#: AppGUI/preferences/tools/Tools2CalPrefGroupUI.py:27
msgid "Calibration Tool Options"
msgstr "Opțiuni Unealta Calibrare"

#: AppGUI/preferences/tools/Tools2CalPrefGroupUI.py:38
#: AppGUI/preferences/tools/Tools2EDrillsPrefGroupUI.py:38
#: AppGUI/preferences/tools/Tools2FiducialsPrefGroupUI.py:38
#: AppGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:38
#: AppGUI/preferences/tools/ToolsCornersPrefGroupUI.py:37
#: AppTools/ToolCopperThieving.py:91 AppTools/ToolCorners.py:108
#: AppTools/ToolFiducials.py:151
msgid "Parameters used for this tool."
msgstr "Parametrii folosiți pentru aceasta unealta."

#: AppGUI/preferences/tools/Tools2CalPrefGroupUI.py:43
#: AppTools/ToolCalibration.py:181
msgid "Source Type"
msgstr "Tipul sursei"

#: AppGUI/preferences/tools/Tools2CalPrefGroupUI.py:44
#: AppTools/ToolCalibration.py:182
msgid ""
"The source of calibration points.\n"
"It can be:\n"
"- Object -> click a hole geo for Excellon or a pad for Gerber\n"
"- Free -> click freely on canvas to acquire the calibration points"
msgstr ""
"Sursa punctelor de calibrare.\n"
"Poate fi:\n"
"- Obiect -> faceți clic pe o geometrie gaură pentru Excellon sau pe un pad "
"pentru Gerber\n"
"- Liber -> faceți clic liber pe ecran pentru a obține punctele de calibrare"

#: AppGUI/preferences/tools/Tools2CalPrefGroupUI.py:49
#: AppTools/ToolCalibration.py:187
msgid "Free"
msgstr "Liber"

#: AppGUI/preferences/tools/Tools2CalPrefGroupUI.py:63
#: AppTools/ToolCalibration.py:76
msgid "Height (Z) for travelling between the points."
msgstr "Înălțime (Z) pentru deplasarea între puncte."

#: AppGUI/preferences/tools/Tools2CalPrefGroupUI.py:75
#: AppTools/ToolCalibration.py:88
msgid "Verification Z"
msgstr "Z Verificare"

#: AppGUI/preferences/tools/Tools2CalPrefGroupUI.py:77
#: AppTools/ToolCalibration.py:90
msgid "Height (Z) for checking the point."
msgstr "Înălțimea (Z) pentru verificarea punctului."

#: AppGUI/preferences/tools/Tools2CalPrefGroupUI.py:89
#: AppTools/ToolCalibration.py:102
msgid "Zero Z tool"
msgstr "Realizare Zero Z"

#: AppGUI/preferences/tools/Tools2CalPrefGroupUI.py:91
#: AppTools/ToolCalibration.py:104
msgid ""
"Include a sequence to zero the height (Z)\n"
"of the verification tool."
msgstr ""
"Includeți o secvență pentru aliniere la zero a înălțimii (Z)\n"
"uneltei de verificare."

#: AppGUI/preferences/tools/Tools2CalPrefGroupUI.py:100
#: AppTools/ToolCalibration.py:113
msgid "Height (Z) for mounting the verification probe."
msgstr "Înălțime (Z) pentru montarea sondei de verificare."

#: AppGUI/preferences/tools/Tools2CalPrefGroupUI.py:114
#: AppTools/ToolCalibration.py:127
msgid ""
"Toolchange X,Y position.\n"
"If no value is entered then the current\n"
"(x, y) point will be used,"
msgstr ""
"Poziția X, Y pt schimbare unealtă.\n"
"Dacă nu este introdusă nicio valoare, atunci poziția\n"
"(x, y) curentă se va folosi,"

#: AppGUI/preferences/tools/Tools2CalPrefGroupUI.py:125
#: AppTools/ToolCalibration.py:153
msgid "Second point"
msgstr "Al doilea punct"

#: AppGUI/preferences/tools/Tools2CalPrefGroupUI.py:127
#: AppTools/ToolCalibration.py:155
msgid ""
"Second point in the Gcode verification can be:\n"
"- top-left -> the user will align the PCB vertically\n"
"- bottom-right -> the user will align the PCB horizontally"
msgstr ""
"Al doilea punct al verificării Gcode poate fi:\n"
"- în stânga sus -> utilizatorul va alinia PCB-ul pe verticală\n"
"- în jos-dreapta -> utilizatorul va alinia PCB-ul pe orizontală"

#: AppGUI/preferences/tools/Tools2CalPrefGroupUI.py:131
#: AppTools/ToolCalibration.py:159 App_Main.py:4934
msgid "Top-Left"
msgstr "Stânga-sus"

#: AppGUI/preferences/tools/Tools2CalPrefGroupUI.py:132
#: AppTools/ToolCalibration.py:160 App_Main.py:4935
msgid "Bottom-Right"
msgstr "Dreapta-jos"

#: AppGUI/preferences/tools/Tools2EDrillsPrefGroupUI.py:27
msgid "Extract Drills Options"
msgstr "Opțiuni Extractie Găuri"

#: AppGUI/preferences/tools/Tools2EDrillsPrefGroupUI.py:42
#: AppGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:42
#: AppTools/ToolExtractDrills.py:68 AppTools/ToolPunchGerber.py:75
msgid "Processed Pads Type"
msgstr "Tipul de pad-uri procesate"

#: AppGUI/preferences/tools/Tools2EDrillsPrefGroupUI.py:44
#: AppGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:44
#: AppTools/ToolExtractDrills.py:70 AppTools/ToolPunchGerber.py:77
msgid ""
"The type of pads shape to be processed.\n"
"If the PCB has many SMD pads with rectangular pads,\n"
"disable the Rectangular aperture."
msgstr ""
"Tipul de forme ale pad-urilor care vor fi procesate.\n"
"Daca PCB-ul are multe paduri SMD cu formă rectangulară,\n"
"dezactivează apertura Rectangular."

#: AppGUI/preferences/tools/Tools2EDrillsPrefGroupUI.py:54
#: AppGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:54
#: AppTools/ToolExtractDrills.py:80 AppTools/ToolPunchGerber.py:91
msgid "Process Circular Pads."
msgstr "Procesează paduri Circulare."

#: AppGUI/preferences/tools/Tools2EDrillsPrefGroupUI.py:60
#: AppGUI/preferences/tools/Tools2EDrillsPrefGroupUI.py:162
#: AppGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:60
#: AppGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:164
#: AppTools/ToolExtractDrills.py:86 AppTools/ToolExtractDrills.py:214
#: AppTools/ToolPunchGerber.py:97 AppTools/ToolPunchGerber.py:242
msgid "Oblong"
msgstr "Oval"

#: AppGUI/preferences/tools/Tools2EDrillsPrefGroupUI.py:62
#: AppGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:62
#: AppTools/ToolExtractDrills.py:88 AppTools/ToolPunchGerber.py:99
msgid "Process Oblong Pads."
msgstr "Procesează paduri Ovale."

#: AppGUI/preferences/tools/Tools2EDrillsPrefGroupUI.py:70
#: AppGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:70
#: AppTools/ToolExtractDrills.py:96 AppTools/ToolPunchGerber.py:107
msgid "Process Square Pads."
msgstr "Procesează paduri Pătratice."

#: AppGUI/preferences/tools/Tools2EDrillsPrefGroupUI.py:78
#: AppGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:78
#: AppTools/ToolExtractDrills.py:104 AppTools/ToolPunchGerber.py:115
msgid "Process Rectangular Pads."
msgstr "Procesează paduri Rectangulare."

#: AppGUI/preferences/tools/Tools2EDrillsPrefGroupUI.py:84
#: AppGUI/preferences/tools/Tools2EDrillsPrefGroupUI.py:201
#: AppGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:84
#: AppGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:203
#: AppTools/ToolExtractDrills.py:110 AppTools/ToolExtractDrills.py:253
#: AppTools/ToolProperties.py:172 AppTools/ToolPunchGerber.py:121
#: AppTools/ToolPunchGerber.py:281
msgid "Others"
msgstr "Altele"

#: AppGUI/preferences/tools/Tools2EDrillsPrefGroupUI.py:86
#: AppGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:86
#: AppTools/ToolExtractDrills.py:112 AppTools/ToolPunchGerber.py:123
msgid "Process pads not in the categories above."
msgstr "Procesează paduri care nu se regăsesc in alte categorii."

#: AppGUI/preferences/tools/Tools2EDrillsPrefGroupUI.py:99
#: AppGUI/preferences/tools/Tools2EDrillsPrefGroupUI.py:123
#: AppGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:100
#: AppGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:125
#: AppTools/ToolExtractDrills.py:139 AppTools/ToolExtractDrills.py:156
#: AppTools/ToolPunchGerber.py:150 AppTools/ToolPunchGerber.py:184
msgid "Fixed Diameter"
msgstr "Dia fix"

#: AppGUI/preferences/tools/Tools2EDrillsPrefGroupUI.py:100
#: AppGUI/preferences/tools/Tools2EDrillsPrefGroupUI.py:140
#: AppGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:101
#: AppGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:142
#: AppTools/ToolExtractDrills.py:140 AppTools/ToolExtractDrills.py:192
#: AppTools/ToolPunchGerber.py:151 AppTools/ToolPunchGerber.py:214
msgid "Fixed Annular Ring"
msgstr "Inel anular Fix"

#: AppGUI/preferences/tools/Tools2EDrillsPrefGroupUI.py:101
#: AppGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:102
#: AppTools/ToolExtractDrills.py:141 AppTools/ToolPunchGerber.py:152
msgid "Proportional"
msgstr "Proportional"

#: AppGUI/preferences/tools/Tools2EDrillsPrefGroupUI.py:107
#: AppTools/ToolExtractDrills.py:130
msgid ""
"The method for processing pads. Can be:\n"
"- Fixed Diameter -> all holes will have a set size\n"
"- Fixed Annular Ring -> all holes will have a set annular ring\n"
"- Proportional -> each hole size will be a fraction of the pad size"
msgstr ""
"Metoda de procesare a padurilor. Poate fi:\n"
"- Diametru fix -> toate găurile vor avea o dimensiune prestabilită\n"
"- Inel anular fix -> toate găurile vor avea un inel anular cu dimensiune "
"prestabilită\n"
"- Proportional -> fiecare gaură va avea un diametru cu dimensiunea fractie a "
"dimensiunii padului"

#: AppGUI/preferences/tools/Tools2EDrillsPrefGroupUI.py:131
#: AppGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:133
#: AppGUI/preferences/tools/ToolsTransformPrefGroupUI.py:220
#: AppTools/ToolExtractDrills.py:164 AppTools/ToolExtractDrills.py:285
#: AppTools/ToolPunchGerber.py:192 AppTools/ToolPunchGerber.py:308
#: AppTools/ToolTransform.py:357 App_Main.py:9852
msgid "Value"
msgstr "Valoare"

#: AppGUI/preferences/tools/Tools2EDrillsPrefGroupUI.py:133
#: AppGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:135
#: AppTools/ToolExtractDrills.py:166 AppTools/ToolPunchGerber.py:194
msgid "Fixed hole diameter."
msgstr "Dia gaură fix."

#: AppGUI/preferences/tools/Tools2EDrillsPrefGroupUI.py:142
#: AppGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:144
#: AppTools/ToolExtractDrills.py:194 AppTools/ToolPunchGerber.py:216
msgid ""
"The size of annular ring.\n"
"The copper sliver between the hole exterior\n"
"and the margin of the copper pad."
msgstr ""
"Dimensiunea Inelului Anular.\n"
"Inelul de cupru dintre exteriorul găurii si\n"
"marginea exterioară a padului de cupru."

#: AppGUI/preferences/tools/Tools2EDrillsPrefGroupUI.py:151
#: AppGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:153
#: AppTools/ToolExtractDrills.py:203 AppTools/ToolPunchGerber.py:231
msgid "The size of annular ring for circular pads."
msgstr "Dimensiunea inelului anular pentru paduri Circulare."

#: AppGUI/preferences/tools/Tools2EDrillsPrefGroupUI.py:164
#: AppGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:166
#: AppTools/ToolExtractDrills.py:216 AppTools/ToolPunchGerber.py:244
msgid "The size of annular ring for oblong pads."
msgstr "Dimensiunea inelului anular pentru paduri Ovale."

#: AppGUI/preferences/tools/Tools2EDrillsPrefGroupUI.py:177
#: AppGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:179
#: AppTools/ToolExtractDrills.py:229 AppTools/ToolPunchGerber.py:257
msgid "The size of annular ring for square pads."
msgstr "Dimensiunea inelului anular pentru paduri Pătratice."

#: AppGUI/preferences/tools/Tools2EDrillsPrefGroupUI.py:190
#: AppGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:192
#: AppTools/ToolExtractDrills.py:242 AppTools/ToolPunchGerber.py:270
msgid "The size of annular ring for rectangular pads."
msgstr "Dimnensiunea inelului anular pentru paduri Rectangulare."

#: AppGUI/preferences/tools/Tools2EDrillsPrefGroupUI.py:203
#: AppGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:205
#: AppTools/ToolExtractDrills.py:255 AppTools/ToolPunchGerber.py:283
msgid "The size of annular ring for other pads."
msgstr ""
"Dimensiunea inelului anular pentru alte tipuri de paduri decat cele de mai "
"sus."

#: AppGUI/preferences/tools/Tools2EDrillsPrefGroupUI.py:213
#: AppGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:215
#: AppTools/ToolExtractDrills.py:276 AppTools/ToolPunchGerber.py:299
msgid "Proportional Diameter"
msgstr "Diametru Proportional"

#: AppGUI/preferences/tools/Tools2EDrillsPrefGroupUI.py:222
#: AppGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:224
msgid "Factor"
msgstr "Factor"

#: AppGUI/preferences/tools/Tools2EDrillsPrefGroupUI.py:224
#: AppGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:226
#: AppTools/ToolExtractDrills.py:287 AppTools/ToolPunchGerber.py:310
msgid ""
"Proportional Diameter.\n"
"The hole diameter will be a fraction of the pad size."
msgstr ""
"Diametru Proportional.\n"
"Diametrul găurii va fi un procent din dimensiunea padului."

#: AppGUI/preferences/tools/Tools2FiducialsPrefGroupUI.py:27
msgid "Fiducials Tool Options"
msgstr "Opțiuni Unealta Fiducials"

#: AppGUI/preferences/tools/Tools2FiducialsPrefGroupUI.py:45
#: AppTools/ToolFiducials.py:158
msgid ""
"This set the fiducial diameter if fiducial type is circular,\n"
"otherwise is the size of the fiducial.\n"
"The soldermask opening is double than that."
msgstr ""
"Aceasta setează diametrul pt fiducial dacă tipul fiducial-ul este circular,\n"
"altfel este dimensiunea fiducial-ului.\n"
"Deschiderea soldermask este dublă."

#: AppGUI/preferences/tools/Tools2FiducialsPrefGroupUI.py:73
#: AppTools/ToolFiducials.py:186
msgid "Auto"
msgstr "Auto"

#: AppGUI/preferences/tools/Tools2FiducialsPrefGroupUI.py:74
#: AppTools/ToolFiducials.py:187
msgid "Manual"
msgstr "Manual"

#: AppGUI/preferences/tools/Tools2FiducialsPrefGroupUI.py:76
#: AppTools/ToolFiducials.py:189
msgid "Mode:"
msgstr "Mod:"

#: AppGUI/preferences/tools/Tools2FiducialsPrefGroupUI.py:78
msgid ""
"- 'Auto' - automatic placement of fiducials in the corners of the bounding "
"box.\n"
"- 'Manual' - manual placement of fiducials."
msgstr ""
"- „Auto” - plasarea automată a fiducial în colțurile casetei de delimitare.\n"
"- „Manual” - plasarea manuală a fiducial."

#: AppGUI/preferences/tools/Tools2FiducialsPrefGroupUI.py:86
#: AppTools/ToolFiducials.py:199
msgid "Up"
msgstr "Sus"

#: AppGUI/preferences/tools/Tools2FiducialsPrefGroupUI.py:87
#: AppTools/ToolFiducials.py:200
msgid "Down"
msgstr "Jos"

#: AppGUI/preferences/tools/Tools2FiducialsPrefGroupUI.py:90
#: AppTools/ToolFiducials.py:203
msgid "Second fiducial"
msgstr "Al 2-lea Fiducial"

#: AppGUI/preferences/tools/Tools2FiducialsPrefGroupUI.py:92
#: AppTools/ToolFiducials.py:205
msgid ""
"The position for the second fiducial.\n"
"- 'Up' - the order is: bottom-left, top-left, top-right.\n"
"- 'Down' - the order is: bottom-left, bottom-right, top-right.\n"
"- 'None' - there is no second fiducial. The order is: bottom-left, top-right."
msgstr ""
"Poziția pentru cel de-al doilea fiducal.\n"
"- „Sus” - ordinea este: jos-stânga, sus-stânga, sus-dreapta.\n"
"- „Jos” - ordinea este: jos-stânga, jos-dreapta, sus-dreapta.\n"
"- „Niciuna” - nu există un al doilea fiduțial. Ordinea este: jos-stânga, sus-"
"dreapta."

#: AppGUI/preferences/tools/Tools2FiducialsPrefGroupUI.py:108
#: AppTools/ToolFiducials.py:221
msgid "Cross"
msgstr "Cruce"

#: AppGUI/preferences/tools/Tools2FiducialsPrefGroupUI.py:109
#: AppTools/ToolFiducials.py:222
msgid "Chess"
msgstr "Şah"

#: AppGUI/preferences/tools/Tools2FiducialsPrefGroupUI.py:112
#: AppTools/ToolFiducials.py:224
msgid "Fiducial Type"
msgstr "Tip Fiducial"

#: AppGUI/preferences/tools/Tools2FiducialsPrefGroupUI.py:114
#: AppTools/ToolFiducials.py:226
msgid ""
"The type of fiducial.\n"
"- 'Circular' - this is the regular fiducial.\n"
"- 'Cross' - cross lines fiducial.\n"
"- 'Chess' - chess pattern fiducial."
msgstr ""
"Tipul de fiducial.\n"
"- „Circular” - acesta este un Fiducial obișnuit.\n"
"- „Cross” - linii încrucișate fiduciare.\n"
"- „Șah” - model de șah fiduciar."

#: AppGUI/preferences/tools/Tools2FiducialsPrefGroupUI.py:123
#: AppTools/ToolFiducials.py:235
msgid "Line thickness"
msgstr "Grosimea liniei"

#: AppGUI/preferences/tools/Tools2InvertPrefGroupUI.py:27
msgid "Invert Gerber Tool Options"
msgstr "Opțiuni Unalta de Inversare Gerber"

#: AppGUI/preferences/tools/Tools2InvertPrefGroupUI.py:33
msgid ""
"A tool to invert Gerber geometry from positive to negative\n"
"and in revers."
msgstr ""
"O unealtă de inversare a geometriei unui obiect Gerber \n"
"din pozitiv in negative si invers."

#: AppGUI/preferences/tools/Tools2InvertPrefGroupUI.py:47
#: AppTools/ToolInvertGerber.py:90
msgid ""
"Distance by which to avoid\n"
"the edges of the Gerber object."
msgstr ""
"Distanta cu care trebuie evitate\n"
"marginile obiectului Gerber."

#: AppGUI/preferences/tools/Tools2InvertPrefGroupUI.py:58
#: AppTools/ToolInvertGerber.py:101
msgid "Lines Join Style"
msgstr "Stil Unire Linii"

#: AppGUI/preferences/tools/Tools2InvertPrefGroupUI.py:60
#: AppTools/ToolInvertGerber.py:103
msgid ""
"The way that the lines in the object outline will be joined.\n"
"Can be:\n"
"- rounded -> an arc is added between two joining lines\n"
"- square -> the lines meet in 90 degrees angle\n"
"- bevel -> the lines are joined by a third line"
msgstr ""
"Modul in care liniile dintr-un perimetru al unui obiect vor fi unite.\n"
"Poate fi:\n"
"- rotunjit -> un arc este adăugat intre oricare doua linii care se "
"intalnesc\n"
"- pătrat -> liniile se vor intalni intr-un unghi de 90 grade\n"
"- Teşit -> liniile sunt unite de o a 3-a linie"

#: AppGUI/preferences/tools/Tools2OptimalPrefGroupUI.py:27
msgid "Optimal Tool Options"
msgstr "Opțiuni Unealta Optim"

#: AppGUI/preferences/tools/Tools2OptimalPrefGroupUI.py:33
msgid ""
"A tool to find the minimum distance between\n"
"every two Gerber geometric elements"
msgstr ""
"Un instrument pentru a găsi distanța minimă între\n"
"la fiecare două elemente geometrice Gerber"

#: AppGUI/preferences/tools/Tools2OptimalPrefGroupUI.py:48
#: AppTools/ToolOptimal.py:78
msgid "Precision"
msgstr "Precizie"

#: AppGUI/preferences/tools/Tools2OptimalPrefGroupUI.py:50
msgid "Number of decimals for the distances and coordinates in this tool."
msgstr ""
"Numărul de zecimale pentru distanțele și coordonatele din acest instrument."

#: AppGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:27
msgid "Punch Gerber Options"
msgstr "Opțiuni Punctare Gerber"

#: AppGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:108
#: AppTools/ToolPunchGerber.py:141
msgid ""
"The punch hole source can be:\n"
"- Excellon Object-> the Excellon object drills center will serve as "
"reference.\n"
"- Fixed Diameter -> will try to use the pads center as reference adding "
"fixed diameter holes.\n"
"- Fixed Annular Ring -> will try to keep a set annular ring.\n"
"- Proportional -> will make a Gerber punch hole having the diameter a "
"percentage of the pad diameter."
msgstr ""
"Sursa de punctare pt găuri poate fi:\n"
"- Obiect Excellon -> centrul găurilor din obiectul Excellon va servi ca "
"referintă.\n"
"- Diametru Fix -> se va incerca să se folosească centrul padurilor ca "
"referintă adăungand diametrul fix al găurilor.\n"
"- Inel anular Fix -> va incerca să mentină un inele anular cu dimensiune "
"prestabilită.\n"
"- Proportional -> găurile de punctare vor avea diametrul un procent "
"prestabilit din diametrul padului."

#: AppGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:27
msgid "QRCode Tool Options"
msgstr "Opțiuni Unealta QRCode"

#: AppGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:33
msgid ""
"A tool to create a QRCode that can be inserted\n"
"into a selected Gerber file, or it can be exported as a file."
msgstr ""
"O unealta pentru a crea un cod QRC care poate fi inserat\n"
"într-un fișier Gerber selectat sau care poate fi exportat ca fișier."

#: AppGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:45
#: AppTools/ToolQRCode.py:100
msgid "Version"
msgstr "Versiune"

#: AppGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:47
#: AppTools/ToolQRCode.py:102
msgid ""
"QRCode version can have values from 1 (21x21 boxes)\n"
"to 40 (177x177 boxes)."
msgstr ""
"Versiunea QRCode poate avea valori de la 1 (21x21 elemente)\n"
"la 40 (177x177 elemente)."

#: AppGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:58
#: AppTools/ToolQRCode.py:113
msgid "Error correction"
msgstr "Corectarea erorii"

#: AppGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:60
#: AppGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:71
#: AppTools/ToolQRCode.py:115 AppTools/ToolQRCode.py:126
#, python-format
msgid ""
"Parameter that controls the error correction used for the QR Code.\n"
"L = maximum 7%% errors can be corrected\n"
"M = maximum 15%% errors can be corrected\n"
"Q = maximum 25%% errors can be corrected\n"
"H = maximum 30%% errors can be corrected."
msgstr ""
"Parametru care controlează corectarea erorilor utilizate pentru codul QR.\n"
"L = maxim 7%% erorile pot fi corectate\n"
"M = maxim 15%% erorile pot fi corectate\n"
"Q = erorile maxime de 25%% pot fi corectate\n"
"H = maxim 30%% erorile pot fi corectate."

#: AppGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:81
#: AppTools/ToolQRCode.py:136
msgid "Box Size"
msgstr "Dim. Element"

#: AppGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:83
#: AppTools/ToolQRCode.py:138
msgid ""
"Box size control the overall size of the QRcode\n"
"by adjusting the size of each box in the code."
msgstr ""
"Dimensiunea Element controlează dimensiunea generală a codului QR\n"
"prin ajustarea dimensiunii fiecărui element din cod."

#: AppGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:94
#: AppTools/ToolQRCode.py:149
msgid "Border Size"
msgstr "Dim Bordură"

#: AppGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:96
#: AppTools/ToolQRCode.py:151
msgid ""
"Size of the QRCode border. How many boxes thick is the border.\n"
"Default value is 4. The width of the clearance around the QRCode."
msgstr ""
"Dimensiunea chenarului QRCode. Câte elemente va contine bordura.\n"
"Valoarea implicită este 4. Lățimea spatiului liber în jurul codului QRC."

#: AppGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:107
#: AppTools/ToolQRCode.py:162
msgid "QRCode Data"
msgstr "Date QRCode"

#: AppGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:109
#: AppTools/ToolQRCode.py:164
msgid "QRCode Data. Alphanumeric text to be encoded in the QRCode."
msgstr "Date QRCode. Text alfanumeric care va fi codat în codul QRC."

#: AppGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:113
#: AppTools/ToolQRCode.py:168
msgid "Add here the text to be included in the QRCode..."
msgstr "Adăugați aici textul care va fi inclus în codul QR ..."

#: AppGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:119
#: AppTools/ToolQRCode.py:174
msgid "Polarity"
msgstr "Polaritate"

#: AppGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:121
#: AppTools/ToolQRCode.py:176
msgid ""
"Choose the polarity of the QRCode.\n"
"It can be drawn in a negative way (squares are clear)\n"
"or in a positive way (squares are opaque)."
msgstr ""
"Alegeți polaritatea codului QRC.\n"
"Poate fi desenat într-un mod negativ (pătratele sunt clare)\n"
"sau într-un mod pozitiv (pătratele sunt opace)."

#: AppGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:125
#: AppTools/ToolFilm.py:279 AppTools/ToolQRCode.py:180
msgid "Negative"
msgstr "Negativ"

#: AppGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:126
#: AppTools/ToolFilm.py:278 AppTools/ToolQRCode.py:181
msgid "Positive"
msgstr "Pozitiv"

#: AppGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:128
#: AppTools/ToolQRCode.py:183
msgid ""
"Choose the type of QRCode to be created.\n"
"If added on a Silkscreen Gerber file the QRCode may\n"
"be added as positive. If it is added to a Copper Gerber\n"
"file then perhaps the QRCode can be added as negative."
msgstr ""
"Alegeți tipul de cod QRC care urmează să fie creat.\n"
"Dacă este adăugat într-un fișier Silkscreen Gerber, codul QR poate\n"
"să fie adăugat ca fiind pozitiv. Dacă este adăugat la un Gerber de cupru\n"
"atunci codul QR poate fi adăugat ca negativ."

#: AppGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:139
#: AppGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:145
#: AppTools/ToolQRCode.py:194 AppTools/ToolQRCode.py:200
msgid ""
"The bounding box, meaning the empty space that surrounds\n"
"the QRCode geometry, can have a rounded or a square shape."
msgstr ""
"Caseta de încadrare, adică spațiul gol care înconjoară\n"
"geometria QRCode, poate avea o formă rotunjită sau pătrată."

#: AppGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:142
#: AppGUI/preferences/tools/ToolsTransformPrefGroupUI.py:239
#: AppTools/ToolQRCode.py:197 AppTools/ToolTransform.py:383
msgid "Rounded"
msgstr "Rotunjit"

#: AppGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:152
#: AppTools/ToolQRCode.py:228
msgid "Fill Color"
msgstr "Culoare Continut"

#: AppGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:154
#: AppTools/ToolQRCode.py:230
msgid "Set the QRCode fill color (squares color)."
msgstr "Setați culoarea QRCode de umplere (culoarea elementelor)."

#: AppGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:173
#: AppTools/ToolQRCode.py:252
msgid "Back Color"
msgstr "Culoare de fundal"

#: AppGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:175
#: AppTools/ToolQRCode.py:254
msgid "Set the QRCode background color."
msgstr "Setați culoarea de fundal QRCode."

#: AppGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:27
msgid "Check Rules Tool Options"
msgstr "Opțiuni Unealta Verificare Reguli"

#: AppGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:32
msgid ""
"A tool to check if Gerber files are within a set\n"
"of Manufacturing Rules."
msgstr ""
"Un instrument pentru a verifica dacă fișierele Gerber se află într-un set\n"
"de Norme de fabricație."

#: AppGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:42
#: AppTools/ToolRulesCheck.py:265 AppTools/ToolRulesCheck.py:929
msgid "Trace Size"
msgstr "Dim. traseu"

#: AppGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:44
#: AppTools/ToolRulesCheck.py:267
msgid "This checks if the minimum size for traces is met."
msgstr "Aceasta verifică dacă dimensiunea minimă a traseelor este respectată."

#: AppGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:54
#: AppGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:74
#: AppGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:94
#: AppGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:114
#: AppGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:134
#: AppGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:154
#: AppGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:174
#: AppGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:194
#: AppGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:216
#: AppGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:236
#: AppTools/ToolRulesCheck.py:277 AppTools/ToolRulesCheck.py:299
#: AppTools/ToolRulesCheck.py:322 AppTools/ToolRulesCheck.py:345
#: AppTools/ToolRulesCheck.py:368 AppTools/ToolRulesCheck.py:391
#: AppTools/ToolRulesCheck.py:414 AppTools/ToolRulesCheck.py:437
#: AppTools/ToolRulesCheck.py:462 AppTools/ToolRulesCheck.py:485
msgid "Min value"
msgstr "Val. min"

#: AppGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:56
#: AppTools/ToolRulesCheck.py:279
msgid "Minimum acceptable trace size."
msgstr "Dimensiunea minimă acceptabilă a traseelor."

#: AppGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:61
#: AppTools/ToolRulesCheck.py:286 AppTools/ToolRulesCheck.py:1157
#: AppTools/ToolRulesCheck.py:1187
msgid "Copper to Copper clearance"
msgstr "Distanta de la cupru până la cupru"

#: AppGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:63
#: AppTools/ToolRulesCheck.py:288
msgid ""
"This checks if the minimum clearance between copper\n"
"features is met."
msgstr ""
"Aceasta verifică dacă distanța minimă dintre traseele cupru\n"
"este îndeplinita."

#: AppGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:76
#: AppGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:96
#: AppGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:116
#: AppGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:136
#: AppGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:156
#: AppGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:176
#: AppGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:238
#: AppTools/ToolRulesCheck.py:301 AppTools/ToolRulesCheck.py:324
#: AppTools/ToolRulesCheck.py:347 AppTools/ToolRulesCheck.py:370
#: AppTools/ToolRulesCheck.py:393 AppTools/ToolRulesCheck.py:416
#: AppTools/ToolRulesCheck.py:464
msgid "Minimum acceptable clearance value."
msgstr "Valoarea minimă acceptabilă a distantei."

#: AppGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:81
#: AppTools/ToolRulesCheck.py:309 AppTools/ToolRulesCheck.py:1217
#: AppTools/ToolRulesCheck.py:1223 AppTools/ToolRulesCheck.py:1236
#: AppTools/ToolRulesCheck.py:1243
msgid "Copper to Outline clearance"
msgstr "Distanta de la Cupru până la contur"

#: AppGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:83
#: AppTools/ToolRulesCheck.py:311
msgid ""
"This checks if the minimum clearance between copper\n"
"features and the outline is met."
msgstr ""
"Aceasta verifică dacă distanța minimă dintre\n"
"traseele de cupru și conturul este îndeplinit."

#: AppGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:101
#: AppTools/ToolRulesCheck.py:332
msgid "Silk to Silk Clearance"
msgstr "Distanta Silk până la Silk Clearance"

#: AppGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:103
#: AppTools/ToolRulesCheck.py:334
msgid ""
"This checks if the minimum clearance between silkscreen\n"
"features and silkscreen features is met."
msgstr ""
"Acest lucru verifică dacă distanța minimă între silk (anotari)\n"
"sunt îndeplinite."

#: AppGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:121
#: AppTools/ToolRulesCheck.py:355 AppTools/ToolRulesCheck.py:1326
#: AppTools/ToolRulesCheck.py:1332 AppTools/ToolRulesCheck.py:1350
msgid "Silk to Solder Mask Clearance"
msgstr "Distanta intre Silk (anotari) si Solder mask (masca fludor)"

#: AppGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:123
#: AppTools/ToolRulesCheck.py:357
msgid ""
"This checks if the minimum clearance between silkscreen\n"
"features and soldermask features is met."
msgstr ""
"Acest lucru verifică dacă distanța minimă între Silk (anotari)\n"
"și Solder Mask (masca de fludor) este îndeplinită."

#: AppGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:141
#: AppTools/ToolRulesCheck.py:378 AppTools/ToolRulesCheck.py:1380
#: AppTools/ToolRulesCheck.py:1386 AppTools/ToolRulesCheck.py:1400
#: AppTools/ToolRulesCheck.py:1407
msgid "Silk to Outline Clearance"
msgstr "Distanta Silk (anotari) si Contur"

#: AppGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:143
#: AppTools/ToolRulesCheck.py:380
msgid ""
"This checks if the minimum clearance between silk\n"
"features and the outline is met."
msgstr ""
"Acest lucru verifică dacă distanța minimă dintre Silk (anotari)\n"
"și Contur este îndeplinită."

#: AppGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:161
#: AppTools/ToolRulesCheck.py:401 AppTools/ToolRulesCheck.py:1418
#: AppTools/ToolRulesCheck.py:1445
msgid "Minimum Solder Mask Sliver"
msgstr ""
"Dim. minima a separatorului din Solder Mask\n"
"(masca de fludor)"

#: AppGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:163
#: AppTools/ToolRulesCheck.py:403
msgid ""
"This checks if the minimum clearance between soldermask\n"
"features and soldermask features is met."
msgstr ""
"Acest lucru verifică dacă distanta minimă între\n"
"elementele soldermask (masca de fludor) este îndeplinită."

#: AppGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:181
#: AppTools/ToolRulesCheck.py:424 AppTools/ToolRulesCheck.py:1483
#: AppTools/ToolRulesCheck.py:1489 AppTools/ToolRulesCheck.py:1505
#: AppTools/ToolRulesCheck.py:1512
msgid "Minimum Annular Ring"
msgstr "Inel anular minim"

#: AppGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:183
#: AppTools/ToolRulesCheck.py:426
msgid ""
"This checks if the minimum copper ring left by drilling\n"
"a hole into a pad is met."
msgstr ""
"Acest lucru verifică dacă inelul de cupru minim rămas prin găurire\n"
"unde se întâlnește o gaură cu pad-ul depășește valoarea minimă."

#: AppGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:196
#: AppTools/ToolRulesCheck.py:439
msgid "Minimum acceptable ring value."
msgstr "Valoarea minimă acceptabilă a inelului."

#: AppGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:203
#: AppTools/ToolRulesCheck.py:449 AppTools/ToolRulesCheck.py:873
msgid "Hole to Hole Clearance"
msgstr "Distanta de la Gaură la Gaură"

#: AppGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:205
#: AppTools/ToolRulesCheck.py:451
msgid ""
"This checks if the minimum clearance between a drill hole\n"
"and another drill hole is met."
msgstr ""
"Acest lucru verifică dacă distanța minimă dintre o gaură\n"
"și o altă gaură este îndeplinită."

#: AppGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:218
#: AppTools/ToolRulesCheck.py:487
msgid "Minimum acceptable drill size."
msgstr "Dimensiunea minimă acceptabilă a gaurii."

#: AppGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:223
#: AppTools/ToolRulesCheck.py:472 AppTools/ToolRulesCheck.py:847
msgid "Hole Size"
msgstr "Dimens. gaura"

#: AppGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:225
#: AppTools/ToolRulesCheck.py:474
msgid ""
"This checks if the drill holes\n"
"sizes are above the threshold."
msgstr ""
"Acest lucru verifică dacă\n"
"dimensiunile găurilor sunt peste prag."

#: AppGUI/preferences/tools/Tools2sidedPrefGroupUI.py:27
msgid "2Sided Tool Options"
msgstr "Opțiuni Unealta 2Fețe"

#: AppGUI/preferences/tools/Tools2sidedPrefGroupUI.py:33
msgid ""
"A tool to help in creating a double sided\n"
"PCB using alignment holes."
msgstr ""
"O unealtă care ajuta in crearea de PCB-uri cu 2 fețe\n"
"folosind găuri de aliniere."

#: AppGUI/preferences/tools/Tools2sidedPrefGroupUI.py:47
msgid "Drill dia"
msgstr "Dia gaură"

#: AppGUI/preferences/tools/Tools2sidedPrefGroupUI.py:49
#: AppTools/ToolDblSided.py:363 AppTools/ToolDblSided.py:368
msgid "Diameter of the drill for the alignment holes."
msgstr "Diametrul găurii pentru găurile de aliniere."

#: AppGUI/preferences/tools/Tools2sidedPrefGroupUI.py:56
#: AppTools/ToolDblSided.py:377
msgid "Align Axis"
msgstr "Aliniați Axa"

#: AppGUI/preferences/tools/Tools2sidedPrefGroupUI.py:58
#: AppGUI/preferences/tools/Tools2sidedPrefGroupUI.py:71
#: AppTools/ToolDblSided.py:165 AppTools/ToolDblSided.py:379
msgid "Mirror vertically (X) or horizontally (Y)."
msgstr "Oglindește vertical (X) sau orizontal (Y)."

#: AppGUI/preferences/tools/Tools2sidedPrefGroupUI.py:69
msgid "Mirror Axis:"
msgstr "Axe oglindire:"

#: AppGUI/preferences/tools/Tools2sidedPrefGroupUI.py:80
#: AppTools/ToolDblSided.py:181
msgid "Point"
msgstr "Punct"

#: AppGUI/preferences/tools/Tools2sidedPrefGroupUI.py:81
#: AppTools/ToolDblSided.py:182
msgid "Box"
msgstr "Forma"

#: AppGUI/preferences/tools/Tools2sidedPrefGroupUI.py:82
msgid "Axis Ref"
msgstr "Axa de Ref"

#: AppGUI/preferences/tools/Tools2sidedPrefGroupUI.py:84
msgid ""
"The axis should pass through a <b>point</b> or cut\n"
" a specified <b>box</b> (in a FlatCAM object) through \n"
"the center."
msgstr ""
"Axa de referinţă ar trebui să treacă printr-un <b>punct</b> ori să strabata\n"
" o <b>forma</b> (obiect FlatCAM) prin mijloc."

#: AppGUI/preferences/tools/ToolsCalculatorsPrefGroupUI.py:27
msgid "Calculators Tool Options"
msgstr "Opțiuni Unealta Calculatoare"

#: AppGUI/preferences/tools/ToolsCalculatorsPrefGroupUI.py:31
#: AppTools/ToolCalculators.py:25
msgid "V-Shape Tool Calculator"
msgstr "Calculator Unealta V-Shape"

#: AppGUI/preferences/tools/ToolsCalculatorsPrefGroupUI.py:33
msgid ""
"Calculate the tool diameter for a given V-shape tool,\n"
"having the tip diameter, tip angle and\n"
"depth-of-cut as parameters."
msgstr ""
"Calculează diametrul pentru o unealtă V-Shape data,\n"
"avand diametrul vârfului și unghiul la vârf cat și\n"
"adâncimea de tăiere, ca parametri."

#: AppGUI/preferences/tools/ToolsCalculatorsPrefGroupUI.py:50
#: AppTools/ToolCalculators.py:94
msgid "Tip Diameter"
msgstr "Dia vârf"

#: AppGUI/preferences/tools/ToolsCalculatorsPrefGroupUI.py:52
#: AppTools/ToolCalculators.py:102
msgid ""
"This is the tool tip diameter.\n"
"It is specified by manufacturer."
msgstr ""
"Acesta este diametrul la vârf al uneltei.\n"
"Este specificat de producator."

#: AppGUI/preferences/tools/ToolsCalculatorsPrefGroupUI.py:64
#: AppTools/ToolCalculators.py:105
msgid "Tip Angle"
msgstr "V-Unghi"

#: AppGUI/preferences/tools/ToolsCalculatorsPrefGroupUI.py:66
msgid ""
"This is the angle on the tip of the tool.\n"
"It is specified by manufacturer."
msgstr ""
"Acesta este unghiul la vârf al uneltei.\n"
"Este specificat de producator."

#: AppGUI/preferences/tools/ToolsCalculatorsPrefGroupUI.py:80
msgid ""
"This is depth to cut into material.\n"
"In the CNCJob object it is the CutZ parameter."
msgstr ""
"Aceasta este adâncimea la care se taie in material.\n"
"In obiectul CNCJob este parametrul >Z tăiere<."

#: AppGUI/preferences/tools/ToolsCalculatorsPrefGroupUI.py:87
#: AppTools/ToolCalculators.py:27
msgid "ElectroPlating Calculator"
msgstr "Calculator ElectroPlacare"

#: AppGUI/preferences/tools/ToolsCalculatorsPrefGroupUI.py:89
#: AppTools/ToolCalculators.py:158
msgid ""
"This calculator is useful for those who plate the via/pad/drill holes,\n"
"using a method like graphite ink or calcium hypophosphite ink or palladium "
"chloride."
msgstr ""
"Acest calculator este util pentru aceia care plachează găuri/vias\n"
"folosind o metoda cum ar fi:\n"
"- cerneala grafitate (carbon)\n"
"- clorura paladiu\n"
"- hipofosfit de calciu."

#: AppGUI/preferences/tools/ToolsCalculatorsPrefGroupUI.py:100
#: AppTools/ToolCalculators.py:167
msgid "Board Length"
msgstr "Lung. plăcii"

#: AppGUI/preferences/tools/ToolsCalculatorsPrefGroupUI.py:102
#: AppTools/ToolCalculators.py:173
msgid "This is the board length. In centimeters."
msgstr ""
"Aceasta este lungimea PCB-ului.\n"
"In centimetri."

#: AppGUI/preferences/tools/ToolsCalculatorsPrefGroupUI.py:112
#: AppTools/ToolCalculators.py:175
msgid "Board Width"
msgstr "Lăt. plăcii"

#: AppGUI/preferences/tools/ToolsCalculatorsPrefGroupUI.py:114
#: AppTools/ToolCalculators.py:181
msgid "This is the board width.In centimeters."
msgstr ""
"Aceasta este lăţimea PCB-ului.\n"
"In centimetri."

#: AppGUI/preferences/tools/ToolsCalculatorsPrefGroupUI.py:119
#: AppTools/ToolCalculators.py:183
msgid "Current Density"
msgstr "Densitate I"

#: AppGUI/preferences/tools/ToolsCalculatorsPrefGroupUI.py:125
#: AppTools/ToolCalculators.py:190
msgid ""
"Current density to pass through the board. \n"
"In Amps per Square Feet ASF."
msgstr ""
"Densitatea de curent care să treaca prin placa.\n"
"In ASF (amperi pe picior la patrat)."

#: AppGUI/preferences/tools/ToolsCalculatorsPrefGroupUI.py:131
#: AppTools/ToolCalculators.py:193
msgid "Copper Growth"
msgstr "Grosime Cu"

#: AppGUI/preferences/tools/ToolsCalculatorsPrefGroupUI.py:137
#: AppTools/ToolCalculators.py:200
msgid ""
"How thick the copper growth is intended to be.\n"
"In microns."
msgstr ""
"Cat de gros se dorește să fie stratul de cupru depus.\n"
"In microni."

#: AppGUI/preferences/tools/ToolsCornersPrefGroupUI.py:27
#, fuzzy
#| msgid "Gerber Options"
msgid "Corner Markers Options"
msgstr "Opțiuni Gerber"

#: AppGUI/preferences/tools/ToolsCornersPrefGroupUI.py:44
#: AppTools/ToolCorners.py:115
msgid "The thickness of the line that makes the corner marker."
msgstr ""

#: AppGUI/preferences/tools/ToolsCornersPrefGroupUI.py:58
#: AppTools/ToolCorners.py:129
msgid "The length of the line that makes the corner marker."
msgstr ""

#: AppGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:28
msgid "Cutout Tool Options"
msgstr "Opțiuni Unealta Decupare"

#: AppGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:43
#: AppTools/ToolCalculators.py:123 AppTools/ToolCutOut.py:129
msgid "Tool Diameter"
msgstr "Dia unealtă"

#: AppGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:45
#: AppTools/ToolCutOut.py:131
msgid ""
"Diameter of the tool used to cutout\n"
"the PCB shape out of the surrounding material."
msgstr ""
"Diametrul uneltei folosita pt decuparea\n"
"PCB-ului din materialului inconjurator."

#: AppGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:100
msgid "Object kind"
msgstr "Tipul de obiect"

#: AppGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:102
#: AppTools/ToolCutOut.py:77
msgid ""
"Choice of what kind the object we want to cutout is.<BR>- <B>Single</B>: "
"contain a single PCB Gerber outline object.<BR>- <B>Panel</B>: a panel PCB "
"Gerber object, which is made\n"
"out of many individual PCB outlines."
msgstr ""
"Genul de obiect pe care vrem să il decupăm..<BR>- <B>Unic</B>: contine un "
"singur contur PCB in obiectul Gerber .<BR>- <B>Panel</B>: un obiect Gerber "
"tip panel, care este făcut\n"
"din mai multe contururi PCB."

#: AppGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:109
#: AppTools/ToolCutOut.py:83
msgid "Single"
msgstr "Unic"

#: AppGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:110
#: AppTools/ToolCutOut.py:84
msgid "Panel"
msgstr "Panel"

#: AppGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:117
#: AppTools/ToolCutOut.py:192
msgid ""
"Margin over bounds. A positive value here\n"
"will make the cutout of the PCB further from\n"
"the actual PCB border"
msgstr ""
"Marginea (zona de siguranţă). O val. pozitivă\n"
"va face decuparea distanțat cu aceasta valoare \n"
"fata de PCB-ul efectiv"

#: AppGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:130
#: AppTools/ToolCutOut.py:203
msgid "Gap size"
msgstr "Dim. punte"

#: AppGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:132
#: AppTools/ToolCutOut.py:205
msgid ""
"The size of the bridge gaps in the cutout\n"
"used to keep the board connected to\n"
"the surrounding material (the one \n"
"from which the PCB is cutout)."
msgstr ""
"Dimenisunea punţilor in decupaj care servesc\n"
"in a mentine ataşat PCB-ul la materialul de unde \n"
"este decupat."

#: AppGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:146
#: AppTools/ToolCutOut.py:245
msgid "Gaps"
msgstr "Punţi"

#: AppGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:148
msgid ""
"Number of gaps used for the cutout.\n"
"There can be maximum 8 bridges/gaps.\n"
"The choices are:\n"
"- None  - no gaps\n"
"- lr    - left + right\n"
"- tb    - top + bottom\n"
"- 4     - left + right +top + bottom\n"
"- 2lr   - 2*left + 2*right\n"
"- 2tb  - 2*top + 2*bottom\n"
"- 8     - 2*left + 2*right +2*top + 2*bottom"
msgstr ""
"Numărul de punţi folosite in decupare.\n"
"Pot fi un număr maxim de 8 punţi aranjate in felul\n"
"următor:\n"
"- Nici unul - nu există spatii\n"
"- lr = stânga -dreapta\n"
"- tb = sus - jos\n"
"- 4 = stânga -dreapta - sus - jos\n"
"- 2lr = 2* stânga - 2* dreapta\n"
"- 2tb = 2* sus - 2* jos\n"
"- 8 = 2* stânga - 2* dreapta - 2* sus - 2* jos"

#: AppGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:170
#: AppTools/ToolCutOut.py:222
msgid "Convex Shape"
msgstr "Forma convexă"

#: AppGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:172
#: AppTools/ToolCutOut.py:225
msgid ""
"Create a convex shape surrounding the entire PCB.\n"
"Used only if the source object type is Gerber."
msgstr ""
"Generează un obiect tip Geometrie care va inconjura\n"
"tot PCB-ul. Forma sa este convexa.\n"
"Se foloseste doar daca obiectul sursă este de tip Gerber."

#: AppGUI/preferences/tools/ToolsFilmPrefGroupUI.py:27
msgid "Film Tool Options"
msgstr "Opțiuni Unealta Film"

#: AppGUI/preferences/tools/ToolsFilmPrefGroupUI.py:33
msgid ""
"Create a PCB film from a Gerber or Geometry\n"
"FlatCAM object.\n"
"The file is saved in SVG format."
msgstr ""
"Crează un film PCB dintr-un obiect Gerber sau tip Geometrie.\n"
"Fişierul este salvat in format SVG."

#: AppGUI/preferences/tools/ToolsFilmPrefGroupUI.py:44
msgid "Film Type"
msgstr "Tip film"

#: AppGUI/preferences/tools/ToolsFilmPrefGroupUI.py:46 AppTools/ToolFilm.py:283
msgid ""
"Generate a Positive black film or a Negative film.\n"
"Positive means that it will print the features\n"
"with black on a white canvas.\n"
"Negative means that it will print the features\n"
"with white on a black canvas.\n"
"The Film format is SVG."
msgstr ""
"Generează un film negru Pozitiv sau un film Negativ.\n"
"Pozitiv = traseele vor fi negre pe un fundal alb.\n"
"Negativ = traseele vor fi albe pe un fundal negru.\n"
"Formatul fişierului pt filmul salvat este SVG."

#: AppGUI/preferences/tools/ToolsFilmPrefGroupUI.py:57
msgid "Film Color"
msgstr "Film Color"

#: AppGUI/preferences/tools/ToolsFilmPrefGroupUI.py:59
msgid "Set the film color when positive film is selected."
msgstr "Setați culoarea filmului atunci când este selectat filmul pozitiv."

#: AppGUI/preferences/tools/ToolsFilmPrefGroupUI.py:82 AppTools/ToolFilm.py:299
msgid "Border"
msgstr "Bordură"

#: AppGUI/preferences/tools/ToolsFilmPrefGroupUI.py:84 AppTools/ToolFilm.py:301
msgid ""
"Specify a border around the object.\n"
"Only for negative film.\n"
"It helps if we use as a Box Object the same \n"
"object as in Film Object. It will create a thick\n"
"black bar around the actual print allowing for a\n"
"better delimitation of the outline features which are of\n"
"white color like the rest and which may confound with the\n"
"surroundings if not for this border."
msgstr ""
"Specifică o bordură de jur imprejurul obiectului.\n"
"Doar pt filmele negative.\n"
"Ajută dacă folosim in Obiect Forma aceluiasi obiect ca in Obiect Film.\n"
"Va crea o bara solidă neagră in jurul printului efectiv permitand o\n"
"delimitare exactă."

#: AppGUI/preferences/tools/ToolsFilmPrefGroupUI.py:101
#: AppTools/ToolFilm.py:266
msgid "Scale Stroke"
msgstr "Scalează"

#: AppGUI/preferences/tools/ToolsFilmPrefGroupUI.py:103
#: AppTools/ToolFilm.py:268
msgid ""
"Scale the line stroke thickness of each feature in the SVG file.\n"
"It means that the line that envelope each SVG feature will be thicker or "
"thinner,\n"
"therefore the fine features may be more affected by this parameter."
msgstr ""
"Scalează grosimea conturului fiecarui element din fişierul SVG.\n"
"Elementele mai mici vor fi afectate mai mult."

#: AppGUI/preferences/tools/ToolsFilmPrefGroupUI.py:110
#: AppTools/ToolFilm.py:124
msgid "Film Adjustments"
msgstr "Reglarea filmelor"

#: AppGUI/preferences/tools/ToolsFilmPrefGroupUI.py:112
#: AppTools/ToolFilm.py:126
msgid ""
"Sometime the printers will distort the print shape, especially the Laser "
"types.\n"
"This section provide the tools to compensate for the print distortions."
msgstr ""
"Unori imprimantele vor denatura forma de imprimare, în special tipurile "
"Laser.\n"
"Această secțiune oferă instrumentele pentru a compensa distorsiunile de "
"tipărire."

#: AppGUI/preferences/tools/ToolsFilmPrefGroupUI.py:119
#: AppTools/ToolFilm.py:133
msgid "Scale Film geometry"
msgstr "Scalați geo film"

#: AppGUI/preferences/tools/ToolsFilmPrefGroupUI.py:121
#: AppTools/ToolFilm.py:135
msgid ""
"A value greater than 1 will stretch the film\n"
"while a value less than 1 will jolt it."
msgstr ""
"O valoare mai mare de 1 va întinde filmul\n"
"în timp ce o valoare mai mică de 1 il va compacta."

#: AppGUI/preferences/tools/ToolsFilmPrefGroupUI.py:131
#: AppGUI/preferences/tools/ToolsTransformPrefGroupUI.py:103
#: AppTools/ToolFilm.py:145 AppTools/ToolTransform.py:148
msgid "X factor"
msgstr "Factor X"

#: AppGUI/preferences/tools/ToolsFilmPrefGroupUI.py:140
#: AppGUI/preferences/tools/ToolsTransformPrefGroupUI.py:116
#: AppTools/ToolFilm.py:154 AppTools/ToolTransform.py:168
msgid "Y factor"
msgstr "Factor Y"

#: AppGUI/preferences/tools/ToolsFilmPrefGroupUI.py:150
#: AppTools/ToolFilm.py:172
msgid "Skew Film geometry"
msgstr "Deformeaza Geo Film"

#: AppGUI/preferences/tools/ToolsFilmPrefGroupUI.py:152
#: AppTools/ToolFilm.py:174
msgid ""
"Positive values will skew to the right\n"
"while negative values will skew to the left."
msgstr ""
"Valorile pozitive vor înclina spre dreapta\n"
"în timp ce valorile negative vor înclina spre stânga."

#: AppGUI/preferences/tools/ToolsFilmPrefGroupUI.py:162
#: AppGUI/preferences/tools/ToolsTransformPrefGroupUI.py:72
#: AppTools/ToolFilm.py:184 AppTools/ToolTransform.py:97
msgid "X angle"
msgstr "Unghi X"

#: AppGUI/preferences/tools/ToolsFilmPrefGroupUI.py:171
#: AppGUI/preferences/tools/ToolsTransformPrefGroupUI.py:86
#: AppTools/ToolFilm.py:193 AppTools/ToolTransform.py:118
msgid "Y angle"
msgstr "Unghi Y"

#: AppGUI/preferences/tools/ToolsFilmPrefGroupUI.py:182
#: AppTools/ToolFilm.py:204
msgid ""
"The reference point to be used as origin for the skew.\n"
"It can be one of the four points of the geometry bounding box."
msgstr ""
"Punctul de referință care trebuie utilizat ca origine pentru Deformare.\n"
"Poate fi unul dintre cele patru puncte ale căsuței de delimitare a "
"geometriei."

#: AppGUI/preferences/tools/ToolsFilmPrefGroupUI.py:185
#: AppTools/ToolCorners.py:80 AppTools/ToolFiducials.py:87
#: AppTools/ToolFilm.py:207
msgid "Bottom Left"
msgstr "Stânga jos"

#: AppGUI/preferences/tools/ToolsFilmPrefGroupUI.py:186
#: AppTools/ToolCorners.py:88 AppTools/ToolFilm.py:208
msgid "Top Left"
msgstr "Stânga sus"

#: AppGUI/preferences/tools/ToolsFilmPrefGroupUI.py:187
#: AppTools/ToolCorners.py:84 AppTools/ToolFilm.py:209
msgid "Bottom Right"
msgstr "Dreapta-jos"

#: AppGUI/preferences/tools/ToolsFilmPrefGroupUI.py:188
#: AppTools/ToolFilm.py:210
msgid "Top right"
msgstr "Dreapta-sus"

#: AppGUI/preferences/tools/ToolsFilmPrefGroupUI.py:196
#: AppTools/ToolFilm.py:227
msgid "Mirror Film geometry"
msgstr "Oglindeste Geo Film"

#: AppGUI/preferences/tools/ToolsFilmPrefGroupUI.py:198
#: AppTools/ToolFilm.py:229
msgid "Mirror the film geometry on the selected axis or on both."
msgstr "Oglindeste geometria filmului pe axa selectată sau pe ambele."

#: AppGUI/preferences/tools/ToolsFilmPrefGroupUI.py:212
#: AppTools/ToolFilm.py:243
msgid "Mirror axis"
msgstr "Axe oglindire"

#: AppGUI/preferences/tools/ToolsFilmPrefGroupUI.py:222
#: AppTools/ToolFilm.py:388
msgid "SVG"
msgstr "SVG"

#: AppGUI/preferences/tools/ToolsFilmPrefGroupUI.py:223
#: AppTools/ToolFilm.py:389
msgid "PNG"
msgstr "PNG"

#: AppGUI/preferences/tools/ToolsFilmPrefGroupUI.py:224
#: AppTools/ToolFilm.py:390
msgid "PDF"
msgstr "PDF"

#: AppGUI/preferences/tools/ToolsFilmPrefGroupUI.py:227
#: AppTools/ToolFilm.py:281 AppTools/ToolFilm.py:393
msgid "Film Type:"
msgstr "Tip film:"

#: AppGUI/preferences/tools/ToolsFilmPrefGroupUI.py:229
#: AppTools/ToolFilm.py:395
msgid ""
"The file type of the saved film. Can be:\n"
"- 'SVG' -> open-source vectorial format\n"
"- 'PNG' -> raster image\n"
"- 'PDF' -> portable document format"
msgstr ""
"Tipul de fișier al filmului salvat. Poate fi:\n"
"- 'SVG' -> format vectorial open-source\n"
"- „PNG” -> imagine raster\n"
"- „PDF” -> format document portabil"

#: AppGUI/preferences/tools/ToolsFilmPrefGroupUI.py:238
#: AppTools/ToolFilm.py:404
msgid "Page Orientation"
msgstr "Orientarea paginii"

#: AppGUI/preferences/tools/ToolsFilmPrefGroupUI.py:251
#: AppTools/ToolFilm.py:417
msgid "Page Size"
msgstr "Mărimea paginii"

#: AppGUI/preferences/tools/ToolsFilmPrefGroupUI.py:252
#: AppTools/ToolFilm.py:418
msgid "A selection of standard ISO 216 page sizes."
msgstr "O selecție de dimensiuni standard de pagină conform ISO 216."

#: AppGUI/preferences/tools/ToolsNCCPrefGroupUI.py:27
msgid "NCC Tool Options"
msgstr "Opțiuni Unealta NCC"

#: AppGUI/preferences/tools/ToolsNCCPrefGroupUI.py:49
#: AppGUI/preferences/tools/ToolsPaintPrefGroupUI.py:57
msgid "Comma separated values"
msgstr "Valori separate cu virgulă"

#: AppGUI/preferences/tools/ToolsNCCPrefGroupUI.py:55
#: AppGUI/preferences/tools/ToolsNCCPrefGroupUI.py:63
#: AppGUI/preferences/tools/ToolsPaintPrefGroupUI.py:64 AppTools/ToolNCC.py:215
#: AppTools/ToolNCC.py:223 AppTools/ToolPaint.py:197 AppTools/ToolPaint.py:205
msgid ""
"Default tool type:\n"
"- 'V-shape'\n"
"- Circular"
msgstr ""
"Tipul de unealtă default:\n"
"- 'Forma-V'\n"
"- Circular"

#: AppGUI/preferences/tools/ToolsNCCPrefGroupUI.py:60
#: AppGUI/preferences/tools/ToolsPaintPrefGroupUI.py:69 AppTools/ToolNCC.py:220
#: AppTools/ToolPaint.py:202
msgid "V-shape"
msgstr "Forma-V"

#: AppGUI/preferences/tools/ToolsNCCPrefGroupUI.py:100
#: AppGUI/preferences/tools/ToolsNCCPrefGroupUI.py:109
#: AppGUI/preferences/tools/ToolsPaintPrefGroupUI.py:107
#: AppGUI/preferences/tools/ToolsPaintPrefGroupUI.py:116
#: AppTools/ToolNCC.py:262 AppTools/ToolNCC.py:271 AppTools/ToolPaint.py:244
#: AppTools/ToolPaint.py:253
msgid ""
"Depth of cut into material. Negative value.\n"
"In FlatCAM units."
msgstr ""
"Adancimea de tăiere in material. Valoare negative.\n"
"In unitătile FlatCAM."

#: AppGUI/preferences/tools/ToolsNCCPrefGroupUI.py:119
#: AppGUI/preferences/tools/ToolsPaintPrefGroupUI.py:125
#: AppTools/ToolNCC.py:280 AppTools/ToolPaint.py:262
msgid ""
"Diameter for the new tool to add in the Tool Table.\n"
"If the tool is V-shape type then this value is automatically\n"
"calculated from the other parameters."
msgstr ""
"Diametru pentru Unealta nouă de adăugat în Tabelul Uneltelor.\n"
"Dacă instrumentul este în formă de V, atunci această valoare este automat\n"
"calculată din ceilalți parametri."

#: AppGUI/preferences/tools/ToolsNCCPrefGroupUI.py:156
#: AppGUI/preferences/tools/ToolsPaintPrefGroupUI.py:142
#: AppTools/ToolNCC.py:174 AppTools/ToolPaint.py:157
msgid "Tool order"
msgstr "Ordine unelte"

#: AppGUI/preferences/tools/ToolsNCCPrefGroupUI.py:157
#: AppGUI/preferences/tools/ToolsNCCPrefGroupUI.py:167
#: AppGUI/preferences/tools/ToolsPaintPrefGroupUI.py:143
#: AppTools/ToolNCC.py:175 AppTools/ToolNCC.py:185 AppTools/ToolPaint.py:158
#: AppTools/ToolPaint.py:168
msgid ""
"This set the way that the tools in the tools table are used.\n"
"'No' --> means that the used order is the one in the tool table\n"
"'Forward' --> means that the tools will be ordered from small to big\n"
"'Reverse' --> means that the tools will ordered from big to small\n"
"\n"
"WARNING: using rest machining will automatically set the order\n"
"in reverse and disable this control."
msgstr ""
"Aceasta stabilește modul în care sunt utilizate uneltele din tabelul de "
"unelte.\n"
"„Nu” -> înseamnă că ordinea utilizată este cea din tabelul de unelte\n"
"„Înainte” -> înseamnă că uneltele vor fi ordonate de la mic la mare\n"
"'Înapoi' -> înseamnă pe care uneltele vor fi ordonate de la mari la mici\n"
"\n"
"AVERTIZARE: folosirea prelucrării 'resturi' va seta automat ordonarea\n"
"în sens invers și va dezactiva acest control."

#: AppGUI/preferences/tools/ToolsNCCPrefGroupUI.py:165
#: AppGUI/preferences/tools/ToolsPaintPrefGroupUI.py:151
#: AppTools/ToolNCC.py:183 AppTools/ToolPaint.py:166
msgid "Forward"
msgstr "Înainte"

#: AppGUI/preferences/tools/ToolsNCCPrefGroupUI.py:166
#: AppGUI/preferences/tools/ToolsPaintPrefGroupUI.py:152
#: AppTools/ToolNCC.py:184 AppTools/ToolPaint.py:167
msgid "Reverse"
msgstr "Înapoi"

#: AppGUI/preferences/tools/ToolsNCCPrefGroupUI.py:266
msgid "Offset value"
msgstr "Valoare Ofset"

#: AppGUI/preferences/tools/ToolsNCCPrefGroupUI.py:268
msgid ""
"If used, it will add an offset to the copper features.\n"
"The copper clearing will finish to a distance\n"
"from the copper features.\n"
"The value can be between 0.0 and 9999.9 FlatCAM units."
msgstr ""
"Dacă este folosit, va adăuga un offset la traseele de cupru.\n"
"Curătarea de cupru se va termina la o anume distanță\n"
"de traseele de cupru.\n"
"Valoarea poate fi cuprinsă între 0 și 9999.9 unități FlatCAM."

#: AppGUI/preferences/tools/ToolsNCCPrefGroupUI.py:288
#: AppGUI/preferences/tools/ToolsPaintPrefGroupUI.py:244
#: AppGUI/preferences/tools/ToolsPaintPrefGroupUI.py:245
#: AppTools/ToolNCC.py:512 AppTools/ToolPaint.py:441
msgid "Rest Machining"
msgstr "Prelucrare prin Resturi"

#: AppGUI/preferences/tools/ToolsNCCPrefGroupUI.py:290 AppTools/ToolNCC.py:516
msgid ""
"If checked, use 'rest machining'.\n"
"Basically it will clear copper outside PCB features,\n"
"using the biggest tool and continue with the next tools,\n"
"from bigger to smaller, to clear areas of copper that\n"
"could not be cleared by previous tool, until there is\n"
"no more copper to clear or there are no more tools.\n"
"If not checked, use the standard algorithm."
msgstr ""
"Daca este bifat foloseşte strategia de curățare tip 'rest'.\n"
"Curățarea de cupru va incepe cu unealta cu diametrul cel mai mare\n"
"continuand ulterior cu cele cu dia mai mic pana numai sunt unelte\n"
"sau s-a terminat procesul.\n"
"Doar uneltele care efectiv au creat geometrie vor fi prezente in obiectul\n"
"final. Aceasta deaorece unele unelte nu vor putea genera geometrie.\n"
"Daca nu este bifat, foloseşte algoritmul standard."

#: AppGUI/preferences/tools/ToolsNCCPrefGroupUI.py:313 AppTools/ToolNCC.py:541
msgid ""
"Selection of area to be processed.\n"
"- 'Itself' - the processing extent is based on the object that is "
"processed.\n"
" - 'Area Selection' - left mouse click to start selection of the area to be "
"processed.\n"
"- 'Reference Object' - will process the area specified by another object."
msgstr ""
"Selectia suprafetei pt procesare.\n"
"- „Însuși” - suprafața de procesare se bazează pe obiectul care este "
"procesat.\n"
"- „Selecție zonă” - faceți clic stânga cu mouse-ul pentru a începe selecția "
"zonei care va fi procesată.\n"
"- „Obiect de referință” - va procesa în zona specificată de un alt obiect."

#: AppGUI/preferences/tools/ToolsNCCPrefGroupUI.py:339
#: AppGUI/preferences/tools/ToolsPaintPrefGroupUI.py:303
msgid "Normal"
msgstr "Normal"

#: AppGUI/preferences/tools/ToolsNCCPrefGroupUI.py:340
#: AppGUI/preferences/tools/ToolsPaintPrefGroupUI.py:304
msgid "Progressive"
msgstr "Progresiv"

#: AppGUI/preferences/tools/ToolsNCCPrefGroupUI.py:341
msgid "NCC Plotting"
msgstr "Afisare NCC"

#: AppGUI/preferences/tools/ToolsNCCPrefGroupUI.py:343
msgid ""
"- 'Normal' -  normal plotting, done at the end of the NCC job\n"
"- 'Progressive' - after each shape is generated it will be plotted."
msgstr ""
"- 'Normal' - afisare normală, efectuată la sfarsitul activitătii NCC\n"
"- 'Progresiv' - forma se afisează imediat ce a fost generată."

#: AppGUI/preferences/tools/ToolsPaintPrefGroupUI.py:27
msgid "Paint Tool Options"
msgstr "Opțiuni Unealta Paint"

#: AppGUI/preferences/tools/ToolsPaintPrefGroupUI.py:33
msgid "<b>Parameters:</b>"
msgstr "<b>Parametri:</b>"

#: AppGUI/preferences/tools/ToolsPaintPrefGroupUI.py:247
#: AppTools/ToolPaint.py:444
msgid ""
"If checked, use 'rest machining'.\n"
"Basically it will clear copper outside PCB features,\n"
"using the biggest tool and continue with the next tools,\n"
"from bigger to smaller, to clear areas of copper that\n"
"could not be cleared by previous tool, until there is\n"
"no more copper to clear or there are no more tools.\n"
"\n"
"If not checked, use the standard algorithm."
msgstr ""
"Daca este bifat, foloste 'rest machining'.\n"
"Mai exact, se va curăța cuprul din afara traseelor,\n"
"folosind mai intai unealta cu diametrul cel mai mare\n"
"apoi folosindu-se progresiv unelte cu diametrul tot\n"
"mai mic, din cele disponibile in tabela de unelte, pt a\n"
"curăța zonele care nu s-au putut curăța cu unealta\n"
"precedenta.\n"
"Daca nu este bifat, foloseşte algoritmul standard."

#: AppGUI/preferences/tools/ToolsPaintPrefGroupUI.py:260
#: AppTools/ToolPaint.py:457
msgid ""
"Selection of area to be processed.\n"
"- 'Polygon Selection' - left mouse click to add/remove polygons to be "
"processed.\n"
"- 'Area Selection' - left mouse click to start selection of the area to be "
"processed.\n"
"Keeping a modifier key pressed (CTRL or SHIFT) will allow to add multiple "
"areas.\n"
"- 'All Polygons' - the process will start after click.\n"
"- 'Reference Object' - will process the area specified by another object."
msgstr ""
"Selectia suprafetei care va fi procesată.\n"
"- „Selecție poligon” - faceți clic stânga pentru a adăuga / elimina "
"poligoane care urmează să fie procesate.\n"
"- „Selecție zonă” - faceți clic stânga cu mouse-ul pentru a începe selecția "
"zonei care va fi procesată.\n"
"Menținerea unei taste modificatoare apăsată (CTRL sau SHIFT) va permite "
"adăugarea mai multor zone.\n"
"- „Toate Poligoanele” - procesarea va începe după clic.\n"
"- „Obiect de referință” - se va procesa zona specificată de un alt obiect."

#: AppGUI/preferences/tools/ToolsPaintPrefGroupUI.py:280
#: AppTools/ToolPaint.py:485 AppTools/ToolPaint.py:941
#: AppTools/ToolPaint.py:1431 tclCommands/TclCommandPaint.py:164
msgid "Polygon Selection"
msgstr "Selecție Poligon"

#: AppGUI/preferences/tools/ToolsPaintPrefGroupUI.py:280
#: AppTools/ToolPaint.py:485 AppTools/ToolPaint.py:1426 defaults.py:433
#: tclCommands/TclCommandPaint.py:162
msgid "All Polygons"
msgstr "Toate Poligoanele"

#: AppGUI/preferences/tools/ToolsPaintPrefGroupUI.py:305
msgid "Paint Plotting"
msgstr "Afisare Paint"

#: AppGUI/preferences/tools/ToolsPaintPrefGroupUI.py:307
msgid ""
"- 'Normal' -  normal plotting, done at the end of the Paint job\n"
"- 'Progressive' - after each shape is generated it will be plotted."
msgstr ""
"- 'Normal' - afisare normală, efectuată la sfarsitul activitătii Paint\n"
"- 'Progresiv' - forma se afisează imediat ce a fost generată."

#: AppGUI/preferences/tools/ToolsPanelizePrefGroupUI.py:27
msgid "Panelize Tool Options"
msgstr "Opțiuni Unealta Panelizare"

#: AppGUI/preferences/tools/ToolsPanelizePrefGroupUI.py:33
msgid ""
"Create an object that contains an array of (x, y) elements,\n"
"each element is a copy of the source object spaced\n"
"at a X distance, Y distance of each other."
msgstr ""
"Crează un obiect care contine o arie de (linii, coloane) elemente,\n"
"unde fiecare element este o copie a obiectului sursa, separat la o\n"
"distanţă X, Y unul de celalalt."

#: AppGUI/preferences/tools/ToolsPanelizePrefGroupUI.py:50
#: AppTools/ToolPanelize.py:165
msgid "Spacing cols"
msgstr "Sep. coloane"

#: AppGUI/preferences/tools/ToolsPanelizePrefGroupUI.py:52
#: AppTools/ToolPanelize.py:167
msgid ""
"Spacing between columns of the desired panel.\n"
"In current units."
msgstr ""
"Spatiul de separare între coloane.\n"
"In unitatile curente."

#: AppGUI/preferences/tools/ToolsPanelizePrefGroupUI.py:64
#: AppTools/ToolPanelize.py:177
msgid "Spacing rows"
msgstr "Sep. linii"

#: AppGUI/preferences/tools/ToolsPanelizePrefGroupUI.py:66
#: AppTools/ToolPanelize.py:179
msgid ""
"Spacing between rows of the desired panel.\n"
"In current units."
msgstr ""
"Spatiul de separare între linii.\n"
"In unitatile curente."

#: AppGUI/preferences/tools/ToolsPanelizePrefGroupUI.py:77
#: AppTools/ToolPanelize.py:188
msgid "Columns"
msgstr "Coloane"

#: AppGUI/preferences/tools/ToolsPanelizePrefGroupUI.py:79
#: AppTools/ToolPanelize.py:190
msgid "Number of columns of the desired panel"
msgstr "Numărul de coloane ale panel-ului dorit"

#: AppGUI/preferences/tools/ToolsPanelizePrefGroupUI.py:89
#: AppTools/ToolPanelize.py:198
msgid "Rows"
msgstr "Linii"

#: AppGUI/preferences/tools/ToolsPanelizePrefGroupUI.py:91
#: AppTools/ToolPanelize.py:200
msgid "Number of rows of the desired panel"
msgstr "Numărul de linii ale panel-ului dorit"

#: AppGUI/preferences/tools/ToolsPanelizePrefGroupUI.py:98
#: AppTools/ToolPanelize.py:211
msgid "Geo"
msgstr "Geo"

#: AppGUI/preferences/tools/ToolsPanelizePrefGroupUI.py:99
#: AppTools/ToolPanelize.py:212
msgid "Panel Type"
msgstr "Tip panel"

#: AppGUI/preferences/tools/ToolsPanelizePrefGroupUI.py:101
msgid ""
"Choose the type of object for the panel object:\n"
"- Gerber\n"
"- Geometry"
msgstr ""
"Alege tipul obiectului panel:\n"
"- Gerber\n"
"- Geometrie"

#: AppGUI/preferences/tools/ToolsPanelizePrefGroupUI.py:110
msgid "Constrain within"
msgstr "Constrange"

#: AppGUI/preferences/tools/ToolsPanelizePrefGroupUI.py:112
#: AppTools/ToolPanelize.py:224
msgid ""
"Area define by DX and DY within to constrain the panel.\n"
"DX and DY values are in current units.\n"
"Regardless of how many columns and rows are desired,\n"
"the final panel will have as many columns and rows as\n"
"they fit completely within selected area."
msgstr ""
"Arie definita de Dx și Dy in care se constrange panel-ul.\n"
"Dx și Dy sunt valori in unitati curente.\n"
"Indiferent de cat de multe coloane și/sau linii sunt selectate mai sus\n"
"panelul final va contine numai acel număr de linii/coloane care se inscrie\n"
"complet in aria desemnata."

#: AppGUI/preferences/tools/ToolsPanelizePrefGroupUI.py:125
#: AppTools/ToolPanelize.py:236
msgid "Width (DX)"
msgstr "Lătime (Dx)"

#: AppGUI/preferences/tools/ToolsPanelizePrefGroupUI.py:127
#: AppTools/ToolPanelize.py:238
msgid ""
"The width (DX) within which the panel must fit.\n"
"In current units."
msgstr ""
"Lăţimea (Dx) in care panelul trebuie să se inscrie.\n"
"In unitati curente."

#: AppGUI/preferences/tools/ToolsPanelizePrefGroupUI.py:138
#: AppTools/ToolPanelize.py:247
msgid "Height (DY)"
msgstr "Inăltime (Dy)"

#: AppGUI/preferences/tools/ToolsPanelizePrefGroupUI.py:140
#: AppTools/ToolPanelize.py:249
msgid ""
"The height (DY)within which the panel must fit.\n"
"In current units."
msgstr ""
"Înălţimea (Dy) in care panelul trebuie să se inscrie.\n"
"In unitati curente."

#: AppGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:27
msgid "SolderPaste Tool Options"
msgstr "Opțiuni Unealta Pasta Fludor"

#: AppGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:33
msgid ""
"A tool to create GCode for dispensing\n"
"solder paste onto a PCB."
msgstr ""
"O unealtă care crează cod G-Code pentru dispensarea de pastă de fludor\n"
"pe padurile unui PCB."

#: AppGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:54
msgid "New Nozzle Dia"
msgstr "Dia nou"

#: AppGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:56
#: AppTools/ToolSolderPaste.py:107
msgid "Diameter for the new Nozzle tool to add in the Tool Table"
msgstr ""
"Valoarea pentru diametrul unei noi unelte (nozzle) pentru adaugare in Tabela "
"de Unelte"

#: AppGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:72
#: AppTools/ToolSolderPaste.py:183
msgid "Z Dispense Start"
msgstr "Z start dispensare"

#: AppGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:74
#: AppTools/ToolSolderPaste.py:185
msgid "The height (Z) when solder paste dispensing starts."
msgstr "Înălţimea (Z) când incepe dispensarea de pastă de fludor."

#: AppGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:85
#: AppTools/ToolSolderPaste.py:195
msgid "Z Dispense"
msgstr "Z dispensare"

#: AppGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:87
#: AppTools/ToolSolderPaste.py:197
msgid "The height (Z) when doing solder paste dispensing."
msgstr "Înălţimea (Z) in timp ce se face dispensarea de pastă de fludor."

#: AppGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:98
#: AppTools/ToolSolderPaste.py:207
msgid "Z Dispense Stop"
msgstr "Z stop dispensare"

#: AppGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:100
#: AppTools/ToolSolderPaste.py:209
msgid "The height (Z) when solder paste dispensing stops."
msgstr "Înălţimea (Z) când se opreste dispensarea de pastă de fludor."

#: AppGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:111
#: AppTools/ToolSolderPaste.py:219
msgid "Z Travel"
msgstr "Z deplasare"

#: AppGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:113
#: AppTools/ToolSolderPaste.py:221
msgid ""
"The height (Z) for travel between pads\n"
"(without dispensing solder paste)."
msgstr ""
"Înălţimea (Z) când se face deplasare între pad-uri.\n"
"(fără dispensare de pastă de fludor)."

#: AppGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:125
#: AppTools/ToolSolderPaste.py:232
msgid "Z Toolchange"
msgstr "Z schimb. unealtă"

#: AppGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:127
#: AppTools/ToolSolderPaste.py:234
msgid "The height (Z) for tool (nozzle) change."
msgstr "Înălţimea (Z) când se schimbă unealta (nozzle-ul)."

#: AppGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:136
#: AppTools/ToolSolderPaste.py:242
msgid ""
"The X,Y location for tool (nozzle) change.\n"
"The format is (x, y) where x and y are real numbers."
msgstr ""
"Coordonatele X, Y pentru schimbarea uneltei (nozzle).\n"
"Formatul este (x,y) unde x și y sunt numere Reale."

#: AppGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:150
#: AppTools/ToolSolderPaste.py:255
msgid "Feedrate (speed) while moving on the X-Y plane."
msgstr "Viteza de deplasare a uneltei când se deplasează in planul X-Y."

#: AppGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:163
#: AppTools/ToolSolderPaste.py:267
msgid ""
"Feedrate (speed) while moving vertically\n"
"(on Z plane)."
msgstr ""
"Viteza de deplasare a uneltei când se misca in plan vertical (planul Z)."

#: AppGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:175
#: AppTools/ToolSolderPaste.py:278
msgid "Feedrate Z Dispense"
msgstr "Feedrate Z dispensare"

#: AppGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:177
msgid ""
"Feedrate (speed) while moving up vertically\n"
"to Dispense position (on Z plane)."
msgstr ""
"Viteza de deplasare la mișcarea pe verticala spre\n"
"poziţia de dispensare (in planul Z)."

#: AppGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:188
#: AppTools/ToolSolderPaste.py:290
msgid "Spindle Speed FWD"
msgstr "Viteza motor inainte"

#: AppGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:190
#: AppTools/ToolSolderPaste.py:292
msgid ""
"The dispenser speed while pushing solder paste\n"
"through the dispenser nozzle."
msgstr ""
"Viteza motorului de dispensare in timp ce impinge pastă de fludor\n"
"prin orificiul uneltei de dispensare."

#: AppGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:202
#: AppTools/ToolSolderPaste.py:303
msgid "Dwell FWD"
msgstr "Pauza FWD"

#: AppGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:204
#: AppTools/ToolSolderPaste.py:305
msgid "Pause after solder dispensing."
msgstr "Pauza dupa dispensarea de pastă de fludor."

#: AppGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:214
#: AppTools/ToolSolderPaste.py:314
msgid "Spindle Speed REV"
msgstr "Viteza motor inapoi"

#: AppGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:216
#: AppTools/ToolSolderPaste.py:316
msgid ""
"The dispenser speed while retracting solder paste\n"
"through the dispenser nozzle."
msgstr ""
"Viteza motorului de dispensare in timp ce retrage pasta de fludor\n"
"prin orificiul uneltei de dispensare."

#: AppGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:228
#: AppTools/ToolSolderPaste.py:327
msgid "Dwell REV"
msgstr "Pauza REV"

#: AppGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:230
#: AppTools/ToolSolderPaste.py:329
msgid ""
"Pause after solder paste dispenser retracted,\n"
"to allow pressure equilibrium."
msgstr ""
"Pauza dupa ce pasta de fludor a fost retrasă,\n"
"necesară pt a ajunge la un echilibru al presiunilor."

#: AppGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:239
#: AppTools/ToolSolderPaste.py:337
msgid "Files that control the GCode generation."
msgstr "Fişiere care controlează generarea codului G-Code."

#: AppGUI/preferences/tools/ToolsSubPrefGroupUI.py:27
msgid "Substractor Tool Options"
msgstr "Opțiuni Unealta Substracţie"

#: AppGUI/preferences/tools/ToolsSubPrefGroupUI.py:33
msgid ""
"A tool to substract one Gerber or Geometry object\n"
"from another of the same type."
msgstr ""
"O unealtă pentru scăderea unui obiect Gerber sau Geometry\n"
"din altul de același tip."

#: AppGUI/preferences/tools/ToolsSubPrefGroupUI.py:38 AppTools/ToolSub.py:155
msgid "Close paths"
msgstr "Închide căile"

#: AppGUI/preferences/tools/ToolsSubPrefGroupUI.py:39
msgid ""
"Checking this will close the paths cut by the Geometry substractor object."
msgstr ""
"Verificând aceasta, se vor închide căile tăiate de obiectul tăietor de tip "
"Geometrie."

#: AppGUI/preferences/tools/ToolsTransformPrefGroupUI.py:27
msgid "Transform Tool Options"
msgstr "Opțiuni Unealta Transformare"

#: AppGUI/preferences/tools/ToolsTransformPrefGroupUI.py:33
msgid ""
"Various transformations that can be applied\n"
"on a FlatCAM object."
msgstr ""
"Diverse transformări care pot fi aplicate\n"
"asupra unui obiect FlatCAM."

#: AppGUI/preferences/tools/ToolsTransformPrefGroupUI.py:64
msgid "Skew"
msgstr "Deformare"

#: AppGUI/preferences/tools/ToolsTransformPrefGroupUI.py:105
#: AppTools/ToolTransform.py:150
msgid "Factor for scaling on X axis."
msgstr "Factor de scalare pe axa X."

#: AppGUI/preferences/tools/ToolsTransformPrefGroupUI.py:118
#: AppTools/ToolTransform.py:170
msgid "Factor for scaling on Y axis."
msgstr "Factor de scalare pe axa Y."

#: AppGUI/preferences/tools/ToolsTransformPrefGroupUI.py:126
#: AppTools/ToolTransform.py:191
msgid ""
"Scale the selected object(s)\n"
"using the Scale_X factor for both axis."
msgstr ""
"Scalează obiectele selectate folosind\n"
"Factor Scal_X pentru ambele axe."

#: AppGUI/preferences/tools/ToolsTransformPrefGroupUI.py:134
#: AppTools/ToolTransform.py:198
msgid ""
"Scale the selected object(s)\n"
"using the origin reference when checked,\n"
"and the center of the biggest bounding box\n"
"of the selected objects when unchecked."
msgstr ""
"Scalează obiectele selectate folosind\n"
"originea ca referinţă atunci când este bifat.\n"
"Când nu este bifat, foloseşte ca referinţă\n"
"centrul formei inconjuatoare care cuprinde\n"
"toate obiectele selectate."

#: AppGUI/preferences/tools/ToolsTransformPrefGroupUI.py:150
#: AppTools/ToolTransform.py:217
msgid "X val"
msgstr "Val X"

#: AppGUI/preferences/tools/ToolsTransformPrefGroupUI.py:152
#: AppTools/ToolTransform.py:219
msgid "Distance to offset on X axis. In current units."
msgstr "Distanta la care se face ofset pe axa X. In unitatile curente."

#: AppGUI/preferences/tools/ToolsTransformPrefGroupUI.py:163
#: AppTools/ToolTransform.py:237
msgid "Y val"
msgstr "Val Y"

#: AppGUI/preferences/tools/ToolsTransformPrefGroupUI.py:165
#: AppTools/ToolTransform.py:239
msgid "Distance to offset on Y axis. In current units."
msgstr "Distanta la care se face ofset pe axa Y. In unitatile curente."

#: AppGUI/preferences/tools/ToolsTransformPrefGroupUI.py:171
#: AppTools/ToolDblSided.py:67 AppTools/ToolDblSided.py:95
#: AppTools/ToolDblSided.py:125
msgid "Mirror"
msgstr "Oglindește"

#: AppGUI/preferences/tools/ToolsTransformPrefGroupUI.py:175
#: AppTools/ToolTransform.py:283
msgid "Mirror Reference"
msgstr "Referinţă Oglindire"

#: AppGUI/preferences/tools/ToolsTransformPrefGroupUI.py:177
#: AppTools/ToolTransform.py:285
msgid ""
"Flip the selected object(s)\n"
"around the point in Point Entry Field.\n"
"\n"
"The point coordinates can be captured by\n"
"left click on canvas together with pressing\n"
"SHIFT key. \n"
"Then click Add button to insert coordinates.\n"
"Or enter the coords in format (x, y) in the\n"
"Point Entry field and click Flip on X(Y)"
msgstr ""
"Oglindește obiectele selectate in jurul punctului\n"
"de referinţă.\n"
"\n"
"Coordonatele punctului se pot obtine prin click pe \n"
"canvas simultan cu apăsarea tastei SHIFT.\n"
"Apoi apasă pe butonul >Adaugă< pentru a insera\n"
"coordonatele.\n"
"Alternativ se pot introduce coordonatele manual,\n"
"in forma (x, y).\n"
"La final apasă butonul de oglindire pe axa dorită"

#: AppGUI/preferences/tools/ToolsTransformPrefGroupUI.py:188
msgid "Mirror Reference point"
msgstr "Punct referinţă Oglindire"

#: AppGUI/preferences/tools/ToolsTransformPrefGroupUI.py:190
msgid ""
"Coordinates in format (x, y) used as reference for mirroring.\n"
"The 'x' in (x, y) will be used when using Flip on X and\n"
"the 'y' in (x, y) will be used when using Flip on Y and"
msgstr ""
"Coordonatele in format (x, y) ale punctului de referinţă pentru\n"
"oglindire.\n"
"X din (x,y) se va folosi când se face oglindirea pe axa X\n"
"Y din (x,y) se va folosi când se face oglindirea pe axa Y si"

#: AppGUI/preferences/tools/ToolsTransformPrefGroupUI.py:203
#: AppTools/ToolDistance.py:505 AppTools/ToolDistanceMin.py:286
#: AppTools/ToolTransform.py:332
msgid "Distance"
msgstr "Distanță"

#: AppGUI/preferences/tools/ToolsTransformPrefGroupUI.py:205
#: AppTools/ToolTransform.py:334
msgid ""
"A positive value will create the effect of dilation,\n"
"while a negative value will create the effect of erosion.\n"
"Each geometry element of the object will be increased\n"
"or decreased with the 'distance'."
msgstr ""
"O valoare pozitivă va crea efectul dilatării,\n"
"în timp ce o valoare negativă va crea efectul eroziunii.\n"
"Fiecare element de geometrie al obiectului va fi mărit\n"
"sau scăzut proportional cu „distanța”."

#: AppGUI/preferences/tools/ToolsTransformPrefGroupUI.py:222
#: AppTools/ToolTransform.py:359
msgid ""
"A positive value will create the effect of dilation,\n"
"while a negative value will create the effect of erosion.\n"
"Each geometry element of the object will be increased\n"
"or decreased to fit the 'Value'. Value is a percentage\n"
"of the initial dimension."
msgstr ""
"O valoare pozitivă va crea efectul dilatării,\n"
"în timp ce o valoare negativă va crea efectul eroziunii.\n"
"Fiecare element de geometrie al obiectului va fi mărit\n"
"sau scăzut proportional cu „distanța”. Valoarea este\n"
"un procent din dimensiunea initială."

#: AppGUI/preferences/tools/ToolsTransformPrefGroupUI.py:241
#: AppTools/ToolTransform.py:385
msgid ""
"If checked then the buffer will surround the buffered shape,\n"
"every corner will be rounded.\n"
"If not checked then the buffer will follow the exact geometry\n"
"of the buffered shape."
msgstr ""
"Dacă este bifat, atunci bufferul va înconjura forma tamponată,\n"
"fiecare colț va fi rotunjit.\n"
"Dacă nu este bifat, bufferul va urma geometria exactă\n"
"de forma tamponată."

#: AppGUI/preferences/utilities/AutoCompletePrefGroupUI.py:27
msgid "Autocompleter Keywords"
msgstr "Cuvinte cheie pt autocomplete"

#: AppGUI/preferences/utilities/AutoCompletePrefGroupUI.py:30
#: AppGUI/preferences/utilities/FAExcPrefGroupUI.py:40
#: AppGUI/preferences/utilities/FAGcoPrefGroupUI.py:30
#: AppGUI/preferences/utilities/FAGrbPrefGroupUI.py:30
msgid "Restore"
msgstr "Restabilire"

#: AppGUI/preferences/utilities/AutoCompletePrefGroupUI.py:31
msgid "Restore the autocompleter keywords list to the default state."
msgstr ""
"Restaurați lista cuvinte cheie pentru autocompletere la starea implicită."

#: AppGUI/preferences/utilities/AutoCompletePrefGroupUI.py:33
msgid "Delete all autocompleter keywords from the list."
msgstr "Ștergeți din listă toate cuvintele cheie pentru autocompletare."

#: AppGUI/preferences/utilities/AutoCompletePrefGroupUI.py:41
msgid "Keywords list"
msgstr "Lista de cuvinte cheie"

#: AppGUI/preferences/utilities/AutoCompletePrefGroupUI.py:43
msgid ""
"List of keywords used by\n"
"the autocompleter in FlatCAM.\n"
"The autocompleter is installed\n"
"in the Code Editor and for the Tcl Shell."
msgstr ""
"Lista cuvintelor cheie utilizate de\n"
"autocompleter în FlatCAM.\n"
"Autocompleterul este instalat\n"
"în Editorul de coduri și pentru Shell Tcl."

#: AppGUI/preferences/utilities/AutoCompletePrefGroupUI.py:64
#: AppGUI/preferences/utilities/FAExcPrefGroupUI.py:73
#: AppGUI/preferences/utilities/FAGcoPrefGroupUI.py:63
#: AppGUI/preferences/utilities/FAGrbPrefGroupUI.py:62
msgid "Extension"
msgstr "Extensie fișier"

#: AppGUI/preferences/utilities/AutoCompletePrefGroupUI.py:65
msgid "A keyword to be added or deleted to the list."
msgstr "Un cuvânt cheie care trebuie adăugat sau șters la listă."

#: AppGUI/preferences/utilities/AutoCompletePrefGroupUI.py:73
msgid "Add keyword"
msgstr "Adăugați cuvant cheie"

#: AppGUI/preferences/utilities/AutoCompletePrefGroupUI.py:74
msgid "Add a keyword to the list"
msgstr "Adăugați un cuvânt cheie la listă"

#: AppGUI/preferences/utilities/AutoCompletePrefGroupUI.py:75
msgid "Delete keyword"
msgstr "Ștergeți cuvântul cheie"

#: AppGUI/preferences/utilities/AutoCompletePrefGroupUI.py:76
msgid "Delete a keyword from the list"
msgstr "Ștergeți un cuvânt cheie din listă"

#: AppGUI/preferences/utilities/FAExcPrefGroupUI.py:27
msgid "Excellon File associations"
msgstr "Asocieri fisiere Excellon"

#: AppGUI/preferences/utilities/FAExcPrefGroupUI.py:41
#: AppGUI/preferences/utilities/FAGcoPrefGroupUI.py:31
#: AppGUI/preferences/utilities/FAGrbPrefGroupUI.py:31
msgid "Restore the extension list to the default state."
msgstr "Restabiliți lista de extensii la starea implicită."

#: AppGUI/preferences/utilities/FAExcPrefGroupUI.py:43
#: AppGUI/preferences/utilities/FAGcoPrefGroupUI.py:33
#: AppGUI/preferences/utilities/FAGrbPrefGroupUI.py:33
msgid "Delete all extensions from the list."
msgstr "Ștergeți toate extensiile din listă."

#: AppGUI/preferences/utilities/FAExcPrefGroupUI.py:51
#: AppGUI/preferences/utilities/FAGcoPrefGroupUI.py:41
#: AppGUI/preferences/utilities/FAGrbPrefGroupUI.py:41
msgid "Extensions list"
msgstr "Lista de extensii"

#: AppGUI/preferences/utilities/FAExcPrefGroupUI.py:53
#: AppGUI/preferences/utilities/FAGcoPrefGroupUI.py:43
#: AppGUI/preferences/utilities/FAGrbPrefGroupUI.py:43
msgid ""
"List of file extensions to be\n"
"associated with FlatCAM."
msgstr ""
"Listă de extensii fisiere care să fie\n"
"associate cu FlatCAM."

#: AppGUI/preferences/utilities/FAExcPrefGroupUI.py:74
#: AppGUI/preferences/utilities/FAGcoPrefGroupUI.py:64
#: AppGUI/preferences/utilities/FAGrbPrefGroupUI.py:63
msgid "A file extension to be added or deleted to the list."
msgstr "O extensie de fișier care trebuie adăugată sau ștersă din listă."

#: AppGUI/preferences/utilities/FAExcPrefGroupUI.py:82
#: AppGUI/preferences/utilities/FAGcoPrefGroupUI.py:72
#: AppGUI/preferences/utilities/FAGrbPrefGroupUI.py:71
msgid "Add Extension"
msgstr "Adaugă Extensie"

#: AppGUI/preferences/utilities/FAExcPrefGroupUI.py:83
#: AppGUI/preferences/utilities/FAGcoPrefGroupUI.py:73
#: AppGUI/preferences/utilities/FAGrbPrefGroupUI.py:72
msgid "Add a file extension to the list"
msgstr "Adăugați o extensie de fișier la listă"

#: AppGUI/preferences/utilities/FAExcPrefGroupUI.py:84
#: AppGUI/preferences/utilities/FAGcoPrefGroupUI.py:74
#: AppGUI/preferences/utilities/FAGrbPrefGroupUI.py:73
msgid "Delete Extension"
msgstr "Ștergeți Extensia"

#: AppGUI/preferences/utilities/FAExcPrefGroupUI.py:85
#: AppGUI/preferences/utilities/FAGcoPrefGroupUI.py:75
#: AppGUI/preferences/utilities/FAGrbPrefGroupUI.py:74
msgid "Delete a file extension from the list"
msgstr "Ștergeți o extensie de fișier din listă"

#: AppGUI/preferences/utilities/FAExcPrefGroupUI.py:92
#: AppGUI/preferences/utilities/FAGcoPrefGroupUI.py:82
#: AppGUI/preferences/utilities/FAGrbPrefGroupUI.py:81
msgid "Apply Association"
msgstr "Aplicați Asociere"

#: AppGUI/preferences/utilities/FAExcPrefGroupUI.py:93
#: AppGUI/preferences/utilities/FAGcoPrefGroupUI.py:83
#: AppGUI/preferences/utilities/FAGrbPrefGroupUI.py:82
msgid ""
"Apply the file associations between\n"
"FlatCAM and the files with above extensions.\n"
"They will be active after next logon.\n"
"This work only in Windows."
msgstr ""
"Aplică asocierea de fisiere intre\n"
"FlatCAM si fisierele cu extensiile de mai sus.\n"
"Vor fi active după următorul login.\n"
"Functionează numai pt Windows."

#: AppGUI/preferences/utilities/FAGcoPrefGroupUI.py:27
msgid "GCode File associations"
msgstr "Asocierile de fisiere G-Code"

#: AppGUI/preferences/utilities/FAGrbPrefGroupUI.py:27
msgid "Gerber File associations"
msgstr "Asocierile de fisiere Gerber"

#: AppObjects/AppObject.py:133
#, python-brace-format
msgid ""
"Object ({kind}) failed because: {error} \n"
"\n"
msgstr ""
"Obiectul ({kind}) a eșuat din cauza: {error} \n"
"\n"

#: AppObjects/AppObject.py:148
msgid "Converting units to "
msgstr "Se convertesc unitătile la "

#: AppObjects/AppObject.py:253
msgid "CREATE A NEW FLATCAM TCL SCRIPT"
msgstr "CREAȚI UN SCRIPT FLATCAM TCL NOU"

#: AppObjects/AppObject.py:254
msgid "TCL Tutorial is here"
msgstr "Tutorialul TCL este aici"

#: AppObjects/AppObject.py:256
msgid "FlatCAM commands list"
msgstr "Lista de comenzi FlatCAM"

#: AppObjects/AppObject.py:257
msgid ""
"Type >help< followed by Run Code for a list of FlatCAM Tcl Commands "
"(displayed in Tcl Shell)."
msgstr ""
"Tastați >ajutor< urmat de Run Code pentru o listă de comenzi Tcl FlatCAM "
"(afișate în Tcl Shell)."

#: AppObjects/AppObject.py:303 AppObjects/AppObject.py:309
#: AppObjects/AppObject.py:315 AppObjects/AppObject.py:321
#: AppObjects/AppObject.py:327 AppObjects/AppObject.py:333
msgid "created/selected"
msgstr "creat / selectat"

#: AppObjects/AppObject.py:348 AppObjects/FlatCAMObj.py:246
#: AppObjects/FlatCAMObj.py:277 AppObjects/FlatCAMObj.py:293
#: AppObjects/FlatCAMObj.py:373 AppTools/ToolCopperThieving.py:1487
#: AppTools/ToolCorners.py:394 AppTools/ToolFiducials.py:810
#: AppTools/ToolMove.py:229 AppTools/ToolQRCode.py:728 App_Main.py:4619
msgid "Plotting"
msgstr "Se afișeaz"

#: AppObjects/FlatCAMCNCJob.py:429 AppObjects/FlatCAMDocument.py:71
#: AppObjects/FlatCAMScript.py:82
msgid "<span style=\"color:green;\"><b>Basic</b></span>"
msgstr "<span style=\"color:green;\"><b>Baza</b></span>"

#: AppObjects/FlatCAMCNCJob.py:435 AppObjects/FlatCAMDocument.py:75
#: AppObjects/FlatCAMScript.py:86
msgid "<span style=\"color:red;\"><b>Advanced</b></span>"
msgstr "<span style=\"color:red;\"><b>Avansat</b></span>"

#: AppObjects/FlatCAMCNCJob.py:478
msgid "Plotting..."
msgstr "Se afișează..."

#: AppObjects/FlatCAMCNCJob.py:507 AppObjects/FlatCAMCNCJob.py:512
#: AppTools/ToolSolderPaste.py:1499
msgid "Export Machine Code ..."
msgstr "Exportă CNC Cod Masina ..."

#: AppObjects/FlatCAMCNCJob.py:517 AppTools/ToolSolderPaste.py:1503
msgid "Export Machine Code cancelled ..."
msgstr "Exportul Codului Mașina a fost anulat ..."

#: AppObjects/FlatCAMCNCJob.py:538
msgid "Machine Code file saved to"
msgstr "Fişierul cu cod CNC este salvat in"

#: AppObjects/FlatCAMCNCJob.py:548 AppObjects/FlatCAMScript.py:134
#: App_Main.py:7455
msgid "Loading..."
msgstr "Se incarcă..."

#: AppObjects/FlatCAMCNCJob.py:562 App_Main.py:7552
msgid "Code Editor"
msgstr "Editor Cod"

#: AppObjects/FlatCAMCNCJob.py:599 AppTools/ToolCalibration.py:1097
msgid "Loaded Machine Code into Code Editor"
msgstr "S-a încărcat Codul Maşină în Editorul Cod"

#: AppObjects/FlatCAMCNCJob.py:740
msgid "This CNCJob object can't be processed because it is a"
msgstr "Acest obiect CNCJob nu poate fi procesat deoarece este un"

#: AppObjects/FlatCAMCNCJob.py:742
msgid "CNCJob object"
msgstr "Obiect CNCJob"

#: AppObjects/FlatCAMCNCJob.py:922
msgid ""
"G-code does not have a G94 code and we will not include the code in the "
"'Prepend to GCode' text box"
msgstr ""
"Codul G nu are un cod G94 și nu vom include codul din caseta de text „Adaugă "
"la GCode”"

#: AppObjects/FlatCAMCNCJob.py:933
msgid "Cancelled. The Toolchange Custom code is enabled but it's empty."
msgstr ""
"Anulat. Codul G-Code din Macro-ul Schimbare unealtă este activat dar nu "
"contine nimic."

#: AppObjects/FlatCAMCNCJob.py:938
msgid "Toolchange G-code was replaced by a custom code."
msgstr "G-Code-ul pt schimbare unealtă a fost inlocuit cu un cod pesonalizat."

#: AppObjects/FlatCAMCNCJob.py:986 AppObjects/FlatCAMCNCJob.py:996
msgid ""
"The used preprocessor file has to have in it's name: 'toolchange_custom'"
msgstr ""
"Postprocesorul folosit trebuie să aibă in numele sau: 'toolchange_custom'"

#: AppObjects/FlatCAMCNCJob.py:999
msgid "There is no preprocessor file."
msgstr "Nu exista nici-un fişier postprocesor."

#: AppObjects/FlatCAMDocument.py:175
msgid "Document Editor"
msgstr "Editor Documente"

#: AppObjects/FlatCAMExcellon.py:527 AppObjects/FlatCAMExcellon.py:825
#: AppObjects/FlatCAMGeometry.py:322 AppObjects/FlatCAMGeometry.py:852
#: AppTools/ToolNCC.py:811 AppTools/ToolNCC.py:1196 AppTools/ToolPaint.py:778
#: AppTools/ToolPaint.py:1170
msgid "Multiple Tools"
msgstr "Unelte multiple"

#: AppObjects/FlatCAMExcellon.py:805
msgid "No Tool Selected"
msgstr "Nici-o Unealtă selectată"

#: AppObjects/FlatCAMExcellon.py:1155 AppObjects/FlatCAMExcellon.py:1248
#: AppObjects/FlatCAMExcellon.py:1435
msgid "Please select one or more tools from the list and try again."
msgstr "Selectează una sau mai multe unelte din lista și încearcă din nou."

#: AppObjects/FlatCAMExcellon.py:1162
msgid "Milling tool for DRILLS is larger than hole size. Cancelled."
msgstr ""
"Anulat. Freza pt frezarea găurilor este mai mare decat diametrul găurii."

#: AppObjects/FlatCAMExcellon.py:1177 AppObjects/FlatCAMExcellon.py:1268
#: AppObjects/FlatCAMExcellon.py:1453 tclCommands/TclCommandDrillcncjob.py:195
msgid "Tool_nr"
msgstr "Nr. Unealtă"

#: AppObjects/FlatCAMExcellon.py:1177 AppObjects/FlatCAMExcellon.py:1268
#: AppObjects/FlatCAMExcellon.py:1453 tclCommands/TclCommandDrillcncjob.py:195
msgid "Drills_Nr"
msgstr "Nr. gaura"

#: AppObjects/FlatCAMExcellon.py:1177 AppObjects/FlatCAMExcellon.py:1268
#: AppObjects/FlatCAMExcellon.py:1453 tclCommands/TclCommandDrillcncjob.py:195
msgid "Slots_Nr"
msgstr "Nr. slot"

#: AppObjects/FlatCAMExcellon.py:1257
msgid "Milling tool for SLOTS is larger than hole size. Cancelled."
msgstr "Anulat. Freza este mai mare decat diametrul slotului de frezat."

#: AppObjects/FlatCAMExcellon.py:1361 AppObjects/FlatCAMGeometry.py:1625
msgid "Focus Z"
msgstr "Focalizare Z"

#: AppObjects/FlatCAMExcellon.py:1380 AppObjects/FlatCAMGeometry.py:1644
msgid "Laser Power"
msgstr "Putere Laser"

#: AppObjects/FlatCAMExcellon.py:1510 AppObjects/FlatCAMGeometry.py:2077
#: AppObjects/FlatCAMGeometry.py:2081 AppObjects/FlatCAMGeometry.py:2232
msgid "Generating CNC Code"
msgstr "CNC Code in curs de generare"

#: AppObjects/FlatCAMExcellon.py:1563 AppObjects/FlatCAMGeometry.py:2542
#, fuzzy
#| msgid "Delete failed. Select a tool to delete."
msgid "Delete failed. There are no exclusion areas to delete."
msgstr "Ștergere eșuată. Selectează o unealtă pt ștergere."

#: AppObjects/FlatCAMExcellon.py:1580 AppObjects/FlatCAMGeometry.py:2559
#, fuzzy
#| msgid "Failed. Nothing selected."
msgid "Delete failed. Nothing is selected."
msgstr "Eșuat. Nu este nimic selectat."

#: AppObjects/FlatCAMExcellon.py:1804 AppTools/ToolNCC.py:918
#: AppTools/ToolPaint.py:843
msgid "Current Tool parameters were applied to all tools."
msgstr "Parametrii Uneltei curente sunt aplicați la toate Uneltele."

#: AppObjects/FlatCAMGeometry.py:123 AppObjects/FlatCAMGeometry.py:1289
#: AppObjects/FlatCAMGeometry.py:1290 AppObjects/FlatCAMGeometry.py:1299
msgid "Iso"
msgstr "Izo"

#: AppObjects/FlatCAMGeometry.py:123 AppObjects/FlatCAMGeometry.py:515
#: AppObjects/FlatCAMGeometry.py:911 AppObjects/FlatCAMGerber.py:891
#: AppObjects/FlatCAMGerber.py:1039 AppTools/ToolCutOut.py:690
#: AppTools/ToolCutOut.py:886 AppTools/ToolCutOut.py:1046
msgid "Rough"
msgstr "Grosier"

#: AppObjects/FlatCAMGeometry.py:123
msgid "Finish"
msgstr "Finisare"

#: AppObjects/FlatCAMGeometry.py:550
msgid "Add from Tool DB"
msgstr "Adaugă Unealta din DB Unelte"

#: AppObjects/FlatCAMGeometry.py:930
msgid "Tool added in Tool Table."
msgstr "Unealtă adăugată in Tabela de Unelte."

#: AppObjects/FlatCAMGeometry.py:1039 AppObjects/FlatCAMGeometry.py:1048
msgid "Failed. Select a tool to copy."
msgstr "Eșuat. Selectează o unealtă pt copiere."

#: AppObjects/FlatCAMGeometry.py:1077
msgid "Tool was copied in Tool Table."
msgstr "Unealta a fost copiata in Tabela de Unelte."

#: AppObjects/FlatCAMGeometry.py:1104
msgid "Tool was edited in Tool Table."
msgstr "Unealta a fost editata in Tabela de Unelte."

#: AppObjects/FlatCAMGeometry.py:1133 AppObjects/FlatCAMGeometry.py:1142
msgid "Failed. Select a tool to delete."
msgstr "Eșuat. Selectează o unealtă pentru ștergere."

#: AppObjects/FlatCAMGeometry.py:1166
msgid "Tool was deleted in Tool Table."
msgstr "Unealta a fost stearsa din Tabela de Unelte."

#: AppObjects/FlatCAMGeometry.py:1203 AppObjects/FlatCAMGeometry.py:1212
msgid ""
"Disabled because the tool is V-shape.\n"
"For V-shape tools the depth of cut is\n"
"calculated from other parameters like:\n"
"- 'V-tip Angle' -> angle at the tip of the tool\n"
"- 'V-tip Dia' -> diameter at the tip of the tool \n"
"- Tool Dia -> 'Dia' column found in the Tool Table\n"
"NB: a value of zero means that Tool Dia = 'V-tip Dia'"
msgstr ""
"Dezactivat deoarece unealta este în formă V.\n"
"Pentru uneltele în formă V adâncimea de tăiere este\n"
"calculată din alți parametri precum:\n"
"- „V-tip Unghi” -> unghiul din vârful uneltei\n"
"- 'V-tip Dia' -> diametrul în vârful sculei\n"
"- Diametrul Uneltei-> coloana „Dia” găsită în tabelul uneltelor\n"
"NB: o valoare de zero înseamnă că Dia Unealta = 'V-tip Dia'"

#: AppObjects/FlatCAMGeometry.py:1697
msgid "This Geometry can't be processed because it is"
msgstr "Acest obiect Geometrie nu poate fi procesat deoarece"

#: AppObjects/FlatCAMGeometry.py:1697
msgid "geometry"
msgstr "geometria"

#: AppObjects/FlatCAMGeometry.py:1738
msgid "Failed. No tool selected in the tool table ..."
msgstr "Eșuat. Nici-o unealtă nu este selectată in Tabela de Unelte ..."

#: AppObjects/FlatCAMGeometry.py:1836 AppObjects/FlatCAMGeometry.py:1986
msgid ""
"Tool Offset is selected in Tool Table but no value is provided.\n"
"Add a Tool Offset or change the Offset Type."
msgstr ""
"Un ofset pt unealtă este selectat in Tabela de Unelte dar nici-o val. nu "
"este oferita.\n"
"Adaugă un ofset pt unealtă sau schimbă Tipul Ofset."

#: AppObjects/FlatCAMGeometry.py:1902 AppObjects/FlatCAMGeometry.py:2048
msgid "G-Code parsing in progress..."
msgstr "Analiza codului G în curs ..."

#: AppObjects/FlatCAMGeometry.py:1904 AppObjects/FlatCAMGeometry.py:2050
msgid "G-Code parsing finished..."
msgstr "Analizarea codului G s-a terminat ..."

#: AppObjects/FlatCAMGeometry.py:1912
msgid "Finished G-Code processing"
msgstr "Prelucrarea G-Code terminată"

#: AppObjects/FlatCAMGeometry.py:1914 AppObjects/FlatCAMGeometry.py:2062
msgid "G-Code processing failed with error"
msgstr "Procesarea G-Code a eșuat cu eroarea"

#: AppObjects/FlatCAMGeometry.py:1956 AppTools/ToolSolderPaste.py:1301
msgid "Cancelled. Empty file, it has no geometry"
msgstr "Anulat. Fişier gol, nu are geometrie"

#: AppObjects/FlatCAMGeometry.py:2060 AppObjects/FlatCAMGeometry.py:2227
msgid "Finished G-Code processing..."
msgstr "Prelucrarea G-Code terminată ..."

#: AppObjects/FlatCAMGeometry.py:2079 AppObjects/FlatCAMGeometry.py:2083
#: AppObjects/FlatCAMGeometry.py:2234
msgid "CNCjob created"
msgstr "CNCjob creat"

#: AppObjects/FlatCAMGeometry.py:2265 AppObjects/FlatCAMGeometry.py:2274
#: AppParsers/ParseGerber.py:1866 AppParsers/ParseGerber.py:1876
msgid "Scale factor has to be a number: integer or float."
msgstr "Factorul de scalare trebuie să fie un număr: natural sau real."

#: AppObjects/FlatCAMGeometry.py:2337
msgid "Geometry Scale done."
msgstr "Scalare Geometrie executată."

#: AppObjects/FlatCAMGeometry.py:2354 AppParsers/ParseGerber.py:1992
msgid ""
"An (x,y) pair of values are needed. Probable you entered only one value in "
"the Offset field."
msgstr ""
"O pereche de valori (x,y) este necesară. Probabil că ai introdus numai o "
"singură valoare in câmpul Offset."

#: AppObjects/FlatCAMGeometry.py:2410
msgid "Geometry Offset done."
msgstr "Ofset Geometrie executat."

#: AppObjects/FlatCAMGeometry.py:2439
msgid ""
"The Toolchange X,Y field in Edit -> Preferences has to be in the format (x, "
"y)\n"
"but now there is only one value, not two."
msgstr ""
"Parametrul >Schimbare Unealtă X, Y< in Editare -> Peferințele trebuie să fie "
"in formatul (x, y) \n"
"dar are o singură valoare in loc de două."

#: AppObjects/FlatCAMGerber.py:494
msgid "Buffering solid geometry"
msgstr "Buferarea geometriei solide"

#: AppObjects/FlatCAMGerber.py:503
msgid "Done"
msgstr "Executat"

#: AppObjects/FlatCAMGerber.py:529 AppObjects/FlatCAMGerber.py:555
msgid "Operation could not be done."
msgstr "Operatia nu a putut fi executată."

#: AppObjects/FlatCAMGerber.py:572
msgid "Isolating..."
msgstr "Se izoleaza..."

#: AppObjects/FlatCAMGerber.py:631
msgid "Click on a polygon to isolate it."
msgstr "Faceți clic pe un poligon pentru a-l izola."

#: AppObjects/FlatCAMGerber.py:670 AppObjects/FlatCAMGerber.py:774
#: AppTools/ToolPaint.py:1515
msgid "Added polygon"
msgstr "S-a adăugat poligon"

#: AppObjects/FlatCAMGerber.py:671 AppObjects/FlatCAMGerber.py:776
msgid "Click to add next polygon or right click to start isolation."
msgstr ""
"Faceți clic pentru a adăuga următorul poligon sau faceți clic dreapta pentru "
"a începe izolarea."

#: AppObjects/FlatCAMGerber.py:683 AppTools/ToolPaint.py:1529
msgid "Removed polygon"
msgstr "Poligon eliminat"

#: AppObjects/FlatCAMGerber.py:684
msgid "Click to add/remove next polygon or right click to start isolation."
msgstr ""
"Faceți clic pentru a adăuga / elimina următorul poligon sau faceți clic "
"dreapta pentru a începe izolarea."

#: AppObjects/FlatCAMGerber.py:689 AppTools/ToolPaint.py:1535
msgid "No polygon detected under click position."
msgstr "Nu a fost detectat niciun poligon sub poziția clicului."

#: AppObjects/FlatCAMGerber.py:710 AppTools/ToolPaint.py:1564
msgid "List of single polygons is empty. Aborting."
msgstr "Lista Poligoanelor este goală. Intrerup."

#: AppObjects/FlatCAMGerber.py:779
msgid "No polygon in selection."
msgstr "Niciun poligon în selecție."

#: AppObjects/FlatCAMGerber.py:907 AppObjects/FlatCAMGerber.py:986
#: AppTools/ToolNCC.py:2097 AppTools/ToolNCC.py:3183 AppTools/ToolNCC.py:3562
msgid "Isolation geometry could not be generated."
msgstr "Geometria de izolare nu a fost posibil să fie generată."

#: AppObjects/FlatCAMGerber.py:932 AppObjects/FlatCAMGerber.py:1064
msgid "Isolation geometry created"
msgstr "Geometria de izolare creată"

#: AppObjects/FlatCAMGerber.py:941 AppObjects/FlatCAMGerber.py:1071
msgid "Subtracting Geo"
msgstr "Scădere Geo"

#: AppObjects/FlatCAMGerber.py:1396
msgid "Plotting Apertures"
msgstr "Aperturile sunt in curs de afișare"

#: AppObjects/FlatCAMObj.py:232
msgid "Name changed from"
msgstr "Nume schimbat din"

#: AppObjects/FlatCAMObj.py:232
msgid "to"
msgstr "la"

#: AppObjects/FlatCAMObj.py:243
msgid "Offsetting..."
msgstr "Ofsetare..."

#: AppObjects/FlatCAMObj.py:257 AppObjects/FlatCAMObj.py:262
msgid "Scaling could not be executed."
msgstr "Scalarea nu a putut fi executată."

#: AppObjects/FlatCAMObj.py:266 AppObjects/FlatCAMObj.py:274
msgid "Scale done."
msgstr "Scalare efectuată."

#: AppObjects/FlatCAMObj.py:272
msgid "Scaling..."
msgstr "Scalare..."

#: AppObjects/FlatCAMObj.py:290
msgid "Skewing..."
msgstr "Deformare..."

#: AppObjects/FlatCAMScript.py:163
msgid "Script Editor"
msgstr "Editor Script"

#: AppObjects/ObjectCollection.py:513
#, python-brace-format
msgid "Object renamed from <b>{old}</b> to <b>{new}</b>"
msgstr "Obiectul este redenumit din <b>{old}</b> in <b>{new}</b>"

#: AppObjects/ObjectCollection.py:925 AppObjects/ObjectCollection.py:931
#: AppObjects/ObjectCollection.py:937 AppObjects/ObjectCollection.py:943
#: AppObjects/ObjectCollection.py:949 AppObjects/ObjectCollection.py:955
#: App_Main.py:6408 App_Main.py:6414 App_Main.py:6420 App_Main.py:6426
msgid "selected"
msgstr "selectat"

#: AppObjects/ObjectCollection.py:986
msgid "Cause of error"
msgstr "Motivul erorii"

#: AppObjects/ObjectCollection.py:1187
msgid "All objects are selected."
msgstr "Totate obiectele sunt selectate."

#: AppObjects/ObjectCollection.py:1197
msgid "Objects selection is cleared."
msgstr "Nici-un obiect nu este selectat."

#: AppParsers/ParseExcellon.py:315
msgid "This is GCODE mark"
msgstr "Acesta este un marcaj Gerber"

#: AppParsers/ParseExcellon.py:432
msgid ""
"No tool diameter info's. See shell.\n"
"A tool change event: T"
msgstr ""
"Nu există informații despre diametrul uneltei. Vezi Shell.\n"
"Un eveniment de schimbare a uneltei: T"

#: AppParsers/ParseExcellon.py:435
msgid ""
"was found but the Excellon file have no informations regarding the tool "
"diameters therefore the application will try to load it by using some 'fake' "
"diameters.\n"
"The user needs to edit the resulting Excellon object and change the "
"diameters to reflect the real diameters."
msgstr ""
"a fost gasită dar fisierul Excellon nu are info's despre diametrele "
"uneltelor prin urmare aplicatia va folosi valori 'false'.\n"
"Userul trebuie să editeze obictul Excellon rezultat si sa ajusteze "
"diametrele a.i sa reflecte diametrele reale."

#: AppParsers/ParseExcellon.py:899
msgid ""
"Excellon Parser error.\n"
"Parsing Failed. Line"
msgstr ""
"Eroare de analiza Excellon.\n"
"Analizarea a esuat. Linia"

#: AppParsers/ParseExcellon.py:981
msgid ""
"Excellon.create_geometry() -> a drill location was skipped due of not having "
"a tool associated.\n"
"Check the resulting GCode."
msgstr ""
"Excellon.create_geometry() -> o locaţie de găurire a fost sarita deoarece nu "
"are o unealtă asociata.\n"
"Verifică codul G-Code rezultat."

#: AppParsers/ParseFont.py:303
msgid "Font not supported, try another one."
msgstr "Fontul nu este acceptat, incearcă altul."

#: AppParsers/ParseGerber.py:425
msgid "Gerber processing. Parsing"
msgstr "Prelucrare Gerber. Analizare"

#: AppParsers/ParseGerber.py:425 AppParsers/ParseHPGL2.py:181
msgid "lines"
msgstr "linii"

#: AppParsers/ParseGerber.py:1001 AppParsers/ParseGerber.py:1101
#: AppParsers/ParseHPGL2.py:274 AppParsers/ParseHPGL2.py:288
#: AppParsers/ParseHPGL2.py:307 AppParsers/ParseHPGL2.py:331
#: AppParsers/ParseHPGL2.py:366
msgid "Coordinates missing, line ignored"
msgstr "Coordonatele lipsesc, linia este ignorată"

#: AppParsers/ParseGerber.py:1003 AppParsers/ParseGerber.py:1103
msgid "GERBER file might be CORRUPT. Check the file !!!"
msgstr "Fişierul Gerber poate fi corrupt. Verificati fişierul!!!"

#: AppParsers/ParseGerber.py:1057
msgid ""
"Region does not have enough points. File will be processed but there are "
"parser errors. Line number"
msgstr ""
"Regiunea Gerber nu are suficiente puncte. Fişierul va fi procesat dar sunt "
"erori de parsare. Numărul liniei"

#: AppParsers/ParseGerber.py:1487 AppParsers/ParseHPGL2.py:401
msgid "Gerber processing. Joining polygons"
msgstr "Prelucrare Gerber. Se combină poligoanele"

#: AppParsers/ParseGerber.py:1504
msgid "Gerber processing. Applying Gerber polarity."
msgstr "Prelucrare Gerber. Se aplica polaritatea Gerber."

#: AppParsers/ParseGerber.py:1564
msgid "Gerber Line"
msgstr "Linia Gerber"

#: AppParsers/ParseGerber.py:1564
msgid "Gerber Line Content"
msgstr "Continut linie Gerber"

#: AppParsers/ParseGerber.py:1566
msgid "Gerber Parser ERROR"
msgstr "Eroare in parserul Gerber"

#: AppParsers/ParseGerber.py:1956
msgid "Gerber Scale done."
msgstr "Scalarea Gerber efectuată."

#: AppParsers/ParseGerber.py:2048
msgid "Gerber Offset done."
msgstr "Offsetare Gerber efectuată."

#: AppParsers/ParseGerber.py:2124
msgid "Gerber Mirror done."
msgstr "Oglindirea Gerber efectuată."

#: AppParsers/ParseGerber.py:2198
msgid "Gerber Skew done."
msgstr "Deformarea Gerber efectuată."

#: AppParsers/ParseGerber.py:2260
msgid "Gerber Rotate done."
msgstr "Rotatia Gerber efectuată."

#: AppParsers/ParseGerber.py:2417
msgid "Gerber Buffer done."
msgstr "Buffer Gerber efectuat."

#: AppParsers/ParseHPGL2.py:181
msgid "HPGL2 processing. Parsing"
msgstr "Prelucrare HPGL2. Analizare"

#: AppParsers/ParseHPGL2.py:413
msgid "HPGL2 Line"
msgstr "Linie HPGL2"

#: AppParsers/ParseHPGL2.py:413
msgid "HPGL2 Line Content"
msgstr "Continut linie HPGL2"

#: AppParsers/ParseHPGL2.py:414
msgid "HPGL2 Parser ERROR"
msgstr "Eroare in parserul HPGL2"

#: AppProcess.py:172
msgid "processes running."
msgstr "procesele care rulează."

#: AppTools/ToolAlignObjects.py:32
msgid "Align Objects"
msgstr "Aliniere Obiecte"

#: AppTools/ToolAlignObjects.py:61
msgid "MOVING object"
msgstr "MISCARE obiect"

#: AppTools/ToolAlignObjects.py:65
msgid ""
"Specify the type of object to be aligned.\n"
"It can be of type: Gerber or Excellon.\n"
"The selection here decide the type of objects that will be\n"
"in the Object combobox."
msgstr ""
"Specifică tipul de obiect care va fi aliniat.\n"
"Poate fi de tipul: Gerber sau Excellon.\n"
"Selectia făcută aici va dicta tipul de obiecte care se vor\n"
"regăsi in combobox-ul >Obiect<."

#: AppTools/ToolAlignObjects.py:86
msgid "Object to be aligned."
msgstr "Obiect care trebuie aliniat."

#: AppTools/ToolAlignObjects.py:98
msgid "TARGET object"
msgstr "Obiectul TINTA"

#: AppTools/ToolAlignObjects.py:100
msgid ""
"Specify the type of object to be aligned to.\n"
"It can be of type: Gerber or Excellon.\n"
"The selection here decide the type of objects that will be\n"
"in the Object combobox."
msgstr ""
"Specifică tipul de obiect la care se va alinia un alt obiect.\n"
"Poate fi de tipul: Gerbe sau Excellon.\n"
"Selectia făcută aici va dicta tipul de obiecte care se vor\n"
"regăsi in combobox-ul >Obiect<."

#: AppTools/ToolAlignObjects.py:122
msgid "Object to be aligned to. Aligner."
msgstr "Obiectul către care se face alinierea. Aliniator."

#: AppTools/ToolAlignObjects.py:135
msgid "Alignment Type"
msgstr "Tip Aliniere"

#: AppTools/ToolAlignObjects.py:137
msgid ""
"The type of alignment can be:\n"
"- Single Point -> it require a single point of sync, the action will be a "
"translation\n"
"- Dual Point -> it require two points of sync, the action will be "
"translation followed by rotation"
msgstr ""
"Tipul de aliniere poate fi:\n"
"- Punct Singular -> necesită un singur punct de sincronizare, actiunea va fi "
"o translatie\n"
"- Punct Dublu -> necesita două puncta de sincronizare, actiunea va di o "
"translatie urmată de o posibilă rotatie"

#: AppTools/ToolAlignObjects.py:143
msgid "Single Point"
msgstr "Punct Singular"

#: AppTools/ToolAlignObjects.py:144
msgid "Dual Point"
msgstr "Punct Dublu"

#: AppTools/ToolAlignObjects.py:159
msgid "Align Object"
msgstr "Aliniază Obiectul"

#: AppTools/ToolAlignObjects.py:161
msgid ""
"Align the specified object to the aligner object.\n"
"If only one point is used then it assumes translation.\n"
"If tho points are used it assume translation and rotation."
msgstr ""
"Aliniază obiectul specificat la obiectul aliniator.\n"
"Dacă doar un singul punct de aliniere este folosit atunci se presupune o "
"simplă translatie.\n"
"Daca se folosesc două puncte atunci va fi o translatie urmată de o posibilă "
"rotatie."

#: AppTools/ToolAlignObjects.py:176 AppTools/ToolCalculators.py:246
#: AppTools/ToolCalibration.py:683 AppTools/ToolCopperThieving.py:484
#: AppTools/ToolCorners.py:173 AppTools/ToolCutOut.py:362
#: AppTools/ToolDblSided.py:471 AppTools/ToolExtractDrills.py:310
#: AppTools/ToolFiducials.py:318 AppTools/ToolFilm.py:503
#: AppTools/ToolInvertGerber.py:140 AppTools/ToolNCC.py:612
#: AppTools/ToolOptimal.py:237 AppTools/ToolPaint.py:555
#: AppTools/ToolPanelize.py:280 AppTools/ToolPunchGerber.py:339
#: AppTools/ToolQRCode.py:314 AppTools/ToolRulesCheck.py:516
#: AppTools/ToolSolderPaste.py:473 AppTools/ToolSub.py:176
#: AppTools/ToolTransform.py:398
msgid "Reset Tool"
msgstr "Resetați Unealta"

#: AppTools/ToolAlignObjects.py:178 AppTools/ToolCalculators.py:248
#: AppTools/ToolCalibration.py:685 AppTools/ToolCopperThieving.py:486
#: AppTools/ToolCorners.py:175 AppTools/ToolCutOut.py:364
#: AppTools/ToolDblSided.py:473 AppTools/ToolExtractDrills.py:312
#: AppTools/ToolFiducials.py:320 AppTools/ToolFilm.py:505
#: AppTools/ToolInvertGerber.py:142 AppTools/ToolNCC.py:614
#: AppTools/ToolOptimal.py:239 AppTools/ToolPaint.py:557
#: AppTools/ToolPanelize.py:282 AppTools/ToolPunchGerber.py:341
#: AppTools/ToolQRCode.py:316 AppTools/ToolRulesCheck.py:518
#: AppTools/ToolSolderPaste.py:475 AppTools/ToolSub.py:178
#: AppTools/ToolTransform.py:400
msgid "Will reset the tool parameters."
msgstr "Va reseta parametrii uneltei."

#: AppTools/ToolAlignObjects.py:244
msgid "Align Tool"
msgstr "Unealta Aliniere"

#: AppTools/ToolAlignObjects.py:289
msgid "There is no aligned FlatCAM object selected..."
msgstr "Nu a fost selectat niciun obiect FlatCAM pentru a fi aliniat..."

#: AppTools/ToolAlignObjects.py:299
msgid "There is no aligner FlatCAM object selected..."
msgstr ""
"Nu a fost selectat niciun obiect FlatCAM către care să se facă alinierea..."

#: AppTools/ToolAlignObjects.py:325 AppTools/ToolAlignObjects.py:385
msgid "First Point"
msgstr "Primul punct"

#: AppTools/ToolAlignObjects.py:325 AppTools/ToolAlignObjects.py:400
msgid "Click on the START point."
msgstr "Click pe punctul START."

#: AppTools/ToolAlignObjects.py:380 AppTools/ToolCalibration.py:920
msgid "Cancelled by user request."
msgstr "Anulat prin solicitarea utilizatorului."

#: AppTools/ToolAlignObjects.py:385 AppTools/ToolAlignObjects.py:407
msgid "Click on the DESTINATION point."
msgstr "Click pe punctul DESTINATIE."

#: AppTools/ToolAlignObjects.py:385 AppTools/ToolAlignObjects.py:400
#: AppTools/ToolAlignObjects.py:407
msgid "Or right click to cancel."
msgstr "Sau fă click dreapta pentru anulare."

#: AppTools/ToolAlignObjects.py:400 AppTools/ToolAlignObjects.py:407
#: AppTools/ToolFiducials.py:111
msgid "Second Point"
msgstr "Al doilea punct"

#: AppTools/ToolCalculators.py:24
msgid "Calculators"
msgstr "Calculatoare"

#: AppTools/ToolCalculators.py:26
msgid "Units Calculator"
msgstr "Calculator Unitati"

#: AppTools/ToolCalculators.py:70
msgid "Here you enter the value to be converted from INCH to MM"
msgstr "Valorile pentru conversie din INCH in MM"

#: AppTools/ToolCalculators.py:75
msgid "Here you enter the value to be converted from MM to INCH"
msgstr "Valorile pentru conversie din MM in INCH"

#: AppTools/ToolCalculators.py:111
msgid ""
"This is the angle of the tip of the tool.\n"
"It is specified by manufacturer."
msgstr ""
"Acesta este unghiul uneltei la vârf.\n"
"Producatorul il specifica in foaia de catalog."

#: AppTools/ToolCalculators.py:120
msgid ""
"This is the depth to cut into the material.\n"
"In the CNCJob is the CutZ parameter."
msgstr ""
"Acest param. este adâncimea de tăiere in material.\n"
"In obiectul CNCJob este parametrul >Z tăiere<."

#: AppTools/ToolCalculators.py:128
msgid ""
"This is the tool diameter to be entered into\n"
"FlatCAM Gerber section.\n"
"In the CNCJob section it is called >Tool dia<."
msgstr ""
"Acesta este diametrul uneltei care trebuie introdus in\n"
"sectiunea FlatCAM Gerber.\n"
"In sectiunea CNCJob este numit >Dia unealtă<."

#: AppTools/ToolCalculators.py:139 AppTools/ToolCalculators.py:235
msgid "Calculate"
msgstr "Calculează"

#: AppTools/ToolCalculators.py:142
msgid ""
"Calculate either the Cut Z or the effective tool diameter,\n"
"  depending on which is desired and which is known. "
msgstr ""
"Calculează ori valorea >Z tăiere< ori valoarea efectiva a diametrului "
"uneltei,\n"
"depinzand de care dintre acestea este cunoscuta. "

#: AppTools/ToolCalculators.py:205
msgid "Current Value"
msgstr "Intensitate"

#: AppTools/ToolCalculators.py:212
msgid ""
"This is the current intensity value\n"
"to be set on the Power Supply. In Amps."
msgstr ""
"Intensitatea curentului electric care se va seta\n"
"in sursa de alimentare. In Amperi."

#: AppTools/ToolCalculators.py:216
msgid "Time"
msgstr "Durată"

#: AppTools/ToolCalculators.py:223
msgid ""
"This is the calculated time required for the procedure.\n"
"In minutes."
msgstr ""
"TImpul necesar (calculat) pentru\n"
"efectuarea procedurii. In minute."

#: AppTools/ToolCalculators.py:238
msgid ""
"Calculate the current intensity value and the procedure time,\n"
"depending on the parameters above"
msgstr ""
"Calculează intensitatea curentului cat și durata procedurii\n"
"in funcţie de parametrii de mai sus"

#: AppTools/ToolCalculators.py:299
msgid "Calc. Tool"
msgstr "Unealta Calc"

#: AppTools/ToolCalibration.py:67
msgid "GCode Parameters"
msgstr "Parametrii GCode"

#: AppTools/ToolCalibration.py:69
msgid "Parameters used when creating the GCode in this tool."
msgstr "Parametrii folosiți la crearea codului GC pentru aceasta unealta."

#: AppTools/ToolCalibration.py:173
msgid "STEP 1: Acquire Calibration Points"
msgstr "PASUL 1: Obțineți punctele de calibrare"

#: AppTools/ToolCalibration.py:175
msgid ""
"Pick four points by clicking on canvas.\n"
"Those four points should be in the four\n"
"(as much as possible) corners of the object."
msgstr ""
"Alege patru puncte făcând clic pe ecran.\n"
"Aceste patru puncte ar trebui să fie în cele patru\n"
"(pe cât posibil) colțurile obiectului."

#: AppTools/ToolCalibration.py:193 AppTools/ToolFilm.py:71
#: AppTools/ToolImage.py:54 AppTools/ToolPanelize.py:77
#: AppTools/ToolProperties.py:177
msgid "Object Type"
msgstr "Tip Obiect"

#: AppTools/ToolCalibration.py:210
msgid "Source object selection"
msgstr "Selectarea obiectului sursă"

#: AppTools/ToolCalibration.py:212
msgid "FlatCAM Object to be used as a source for reference points."
msgstr ""
"Obiect FlatCAM care trebuie utilizat ca sursă pentru punctele de referință."

#: AppTools/ToolCalibration.py:218
msgid "Calibration Points"
msgstr "Puncte de calibrare"

#: AppTools/ToolCalibration.py:220
msgid ""
"Contain the expected calibration points and the\n"
"ones measured."
msgstr ""
"Conține punctele de calibrare așteptate și\n"
"cele măsurate."

#: AppTools/ToolCalibration.py:235 AppTools/ToolSub.py:76
#: AppTools/ToolSub.py:131
msgid "Target"
msgstr "Tintă"

#: AppTools/ToolCalibration.py:236
msgid "Found Delta"
msgstr "Delta găsit"

#: AppTools/ToolCalibration.py:248
msgid "Bot Left X"
msgstr "Stânga jos X"

#: AppTools/ToolCalibration.py:257
msgid "Bot Left Y"
msgstr "Stânga jos Y"

#: AppTools/ToolCalibration.py:275
msgid "Bot Right X"
msgstr "Dreapta-jos X"

#: AppTools/ToolCalibration.py:285
msgid "Bot Right Y"
msgstr "Dreapta-jos Y"

#: AppTools/ToolCalibration.py:300
msgid "Top Left X"
msgstr "Stânga sus X"

#: AppTools/ToolCalibration.py:309
msgid "Top Left Y"
msgstr "Stânga sus Y"

#: AppTools/ToolCalibration.py:324
msgid "Top Right X"
msgstr "Dreapta-sus X"

#: AppTools/ToolCalibration.py:334
msgid "Top Right Y"
msgstr "Dreapta-sus Y"

#: AppTools/ToolCalibration.py:367
msgid "Get Points"
msgstr "Obține puncte"

#: AppTools/ToolCalibration.py:369
msgid ""
"Pick four points by clicking on canvas if the source choice\n"
"is 'free' or inside the object geometry if the source is 'object'.\n"
"Those four points should be in the four squares of\n"
"the object."
msgstr ""
"Alegeți patru puncte dând clic pe ecran dacă alegeți sursa\n"
"„liber” sau în interiorul geometriei obiectului dacă sursa este „obiect”.\n"
"Aceste patru puncte ar trebui să se afle în cele patru colțuri ale\n"
"obiectului."

#: AppTools/ToolCalibration.py:390
msgid "STEP 2: Verification GCode"
msgstr "PASUL 2: GCode de verificare"

#: AppTools/ToolCalibration.py:392 AppTools/ToolCalibration.py:405
msgid ""
"Generate GCode file to locate and align the PCB by using\n"
"the four points acquired above.\n"
"The points sequence is:\n"
"- first point -> set the origin\n"
"- second point -> alignment point. Can be: top-left or bottom-right.\n"
"- third point -> check point. Can be: top-left or bottom-right.\n"
"- forth point -> final verification point. Just for evaluation."
msgstr ""
"Generați fișier GCode pentru a localiza și alinia PCB-ul utilizând\n"
"cele patru puncte dobândite mai sus.\n"
"Secvența punctelor este:\n"
"- primul punct -> setați originea\n"
"- al doilea punct -> punctul de aliniere. Poate fi: sus-stânga sau jos-"
"dreapta.\n"
"- al treilea punct -> punctul de verificare. Poate fi: sus-stânga sau jos-"
"dreapta.\n"
"- punctul înainte -> punctul de verificare final. Doar pentru evaluare."

#: AppTools/ToolCalibration.py:403 AppTools/ToolSolderPaste.py:348
msgid "Generate GCode"
msgstr "Generează GCode"

#: AppTools/ToolCalibration.py:429
msgid "STEP 3: Adjustments"
msgstr "PASUL 3: Reglaje"

#: AppTools/ToolCalibration.py:431 AppTools/ToolCalibration.py:440
msgid ""
"Calculate Scale and Skew factors based on the differences (delta)\n"
"found when checking the PCB pattern. The differences must be filled\n"
"in the fields Found (Delta)."
msgstr ""
"Calculați factorii de Scalare și Deformare pe baza diferențelor (delta)\n"
"găsite la verificarea modelului PCB. Diferențele trebuie completate\n"
"în câmpurile găsite (Delta)."

#: AppTools/ToolCalibration.py:438
msgid "Calculate Factors"
msgstr "Calculați factorii"

#: AppTools/ToolCalibration.py:460
msgid "STEP 4: Adjusted GCode"
msgstr "PASUL 4: GCode ajustat"

#: AppTools/ToolCalibration.py:462
msgid ""
"Generate verification GCode file adjusted with\n"
"the factors above."
msgstr ""
"Generați fișierul GCode de verificare ajustat cu\n"
"factorii de mai sus."

#: AppTools/ToolCalibration.py:467
msgid "Scale Factor X:"
msgstr "Factor scalare X:"

#: AppTools/ToolCalibration.py:479
msgid "Scale Factor Y:"
msgstr "Factor scalare Y:"

#: AppTools/ToolCalibration.py:491
msgid "Apply Scale Factors"
msgstr "Aplicați factorii de scalare"

#: AppTools/ToolCalibration.py:493
msgid "Apply Scale factors on the calibration points."
msgstr "Aplicați factorii de Scalare asupra punctelor de calibrare."

#: AppTools/ToolCalibration.py:503
msgid "Skew Angle X:"
msgstr "Unghi X Deformare:"

#: AppTools/ToolCalibration.py:516
msgid "Skew Angle Y:"
msgstr "Unghi Y Deformare:"

#: AppTools/ToolCalibration.py:529
msgid "Apply Skew Factors"
msgstr "Aplicați factorii de deformare"

#: AppTools/ToolCalibration.py:531
msgid "Apply Skew factors on the calibration points."
msgstr "Aplicați factorii de Deformare asupra punctelor de calibrare."

#: AppTools/ToolCalibration.py:600
msgid "Generate Adjusted GCode"
msgstr "Generați GCode ajustat"

#: AppTools/ToolCalibration.py:602
msgid ""
"Generate verification GCode file adjusted with\n"
"the factors set above.\n"
"The GCode parameters can be readjusted\n"
"before clicking this button."
msgstr ""
"Generați fișierul GCode de verificare ajustat cu\n"
"factorii stabiliți mai sus.\n"
"Parametrii GCode pot fi reglați\n"
"înainte de a face clic pe acest buton."

#: AppTools/ToolCalibration.py:623
msgid "STEP 5: Calibrate FlatCAM Objects"
msgstr "PASUL 5: Calibrați obiectele FlatCAM"

#: AppTools/ToolCalibration.py:625
msgid ""
"Adjust the FlatCAM objects\n"
"with the factors determined and verified above."
msgstr ""
"Reglați obiectele FlatCAM\n"
"cu factorii determinați și verificați mai sus."

#: AppTools/ToolCalibration.py:637
msgid "Adjusted object type"
msgstr "Tipul obiectului ajustat"

#: AppTools/ToolCalibration.py:638
msgid "Type of the FlatCAM Object to be adjusted."
msgstr "Tipul obiectului FlatCAM care trebuie ajustat."

#: AppTools/ToolCalibration.py:651
msgid "Adjusted object selection"
msgstr "Selectarea obiectului ajustat"

#: AppTools/ToolCalibration.py:653
msgid "The FlatCAM Object to be adjusted."
msgstr "Obiectul FlatCAM care trebuie ajustat."

#: AppTools/ToolCalibration.py:660
msgid "Calibrate"
msgstr "Calibreaza"

#: AppTools/ToolCalibration.py:662
msgid ""
"Adjust (scale and/or skew) the objects\n"
"with the factors determined above."
msgstr ""
"Reglați (Scalați și / sau Deformați) obiectele\n"
"cu factorii determinați mai sus."

#: AppTools/ToolCalibration.py:770 AppTools/ToolCalibration.py:771
msgid "Origin"
msgstr "Originea"

#: AppTools/ToolCalibration.py:800
msgid "Tool initialized"
msgstr "Unealtă initializată"

#: AppTools/ToolCalibration.py:838
msgid "There is no source FlatCAM object selected..."
msgstr "Nu a fost selectat niciun obiect FlatCAM sursă ..."

#: AppTools/ToolCalibration.py:859
msgid "Get First calibration point. Bottom Left..."
msgstr "Obțineți primul punct de calibrare. Stânga jos..."

#: AppTools/ToolCalibration.py:926
msgid "Get Second calibration point. Bottom Right (Top Left)..."
msgstr ""
"Obțineți al doilea punct de calibrare. Dreapta jos (sau în stânga sus) ..."

#: AppTools/ToolCalibration.py:930
msgid "Get Third calibration point. Top Left (Bottom Right)..."
msgstr ""
"Obțineți al treilea punct de calibrare. Sus stanga (sau în jos dreapta)..."

#: AppTools/ToolCalibration.py:934
msgid "Get Forth calibration point. Top Right..."
msgstr "Obțineți punctul de calibrare Forth. Sus în dreapta..."

#: AppTools/ToolCalibration.py:938
msgid "Done. All four points have been acquired."
msgstr "Terminat. Toate cele patru puncte au fost obținute."

#: AppTools/ToolCalibration.py:969
msgid "Verification GCode for FlatCAM Calibration Tool"
msgstr "GCode de verificare pentru Unealta FlatCAM de Calibrare"

#: AppTools/ToolCalibration.py:981 AppTools/ToolCalibration.py:1067
msgid "Gcode Viewer"
msgstr "Gcode Viewer"

#: AppTools/ToolCalibration.py:997
msgid "Cancelled. Four points are needed for GCode generation."
msgstr "Anulat. Patru puncte sunt necesare pentru generarea GCode."

#: AppTools/ToolCalibration.py:1253 AppTools/ToolCalibration.py:1349
msgid "There is no FlatCAM object selected..."
msgstr "Nu a fost selectat niciun obiect FlatCAM ..."

#: AppTools/ToolCopperThieving.py:76 AppTools/ToolFiducials.py:261
msgid "Gerber Object to which will be added a copper thieving."
msgstr "Obiect Gerber căruia i se va adăuga Copper Thieving."

#: AppTools/ToolCopperThieving.py:98
msgid ""
"This set the distance between the copper thieving components\n"
"(the polygon fill may be split in multiple polygons)\n"
"and the copper traces in the Gerber file."
msgstr ""
"Aceasta stabileste distanța dintre componentele Copper Thieving\n"
"(umplutura poligonului poate fi împărțită în mai multe poligoane)\n"
"si traseele de cupru din fisierul Gerber."

#: AppTools/ToolCopperThieving.py:131
msgid ""
"- 'Itself' - the copper thieving extent is based on the object extent.\n"
"- 'Area Selection' - left mouse click to start selection of the area to be "
"filled.\n"
"- 'Reference Object' - will do copper thieving within the area specified by "
"another object."
msgstr ""
"- „Însuși” - amploarea Copper Thieving se bazează pe suprafata obiectului.\n"
"- „Selecție zonă” - faceți clic stânga cu mouse-ul pentru a începe selecția "
"zonei.\n"
"- „Obiect de referință” - va face Copper Thieving în zona specificată de un "
"alt obiect."

#: AppTools/ToolCopperThieving.py:138 AppTools/ToolNCC.py:552
#: AppTools/ToolPaint.py:495
msgid "Ref. Type"
msgstr "Tip Ref"

#: AppTools/ToolCopperThieving.py:140
msgid ""
"The type of FlatCAM object to be used as copper thieving reference.\n"
"It can be Gerber, Excellon or Geometry."
msgstr ""
"Tipul obiectului FlatCAM care va fi utilizat ca referință la Copper "
"Thieving.\n"
"Poate fi Gerber, Excellon sau Geometrie."

#: AppTools/ToolCopperThieving.py:149 AppTools/ToolNCC.py:562
#: AppTools/ToolPaint.py:505
msgid "Ref. Object"
msgstr "Obiect Ref"

#: AppTools/ToolCopperThieving.py:151 AppTools/ToolNCC.py:564
#: AppTools/ToolPaint.py:507
msgid "The FlatCAM object to be used as non copper clearing reference."
msgstr ""
"Obiectul FlatCAM pentru a fi utilizat ca referință pt. curățarea de cupru."

#: AppTools/ToolCopperThieving.py:327
msgid "Insert Copper thieving"
msgstr "Inserați Copper Thieving"

#: AppTools/ToolCopperThieving.py:329
msgid ""
"Will add a polygon (may be split in multiple parts)\n"
"that will surround the actual Gerber traces at a certain distance."
msgstr ""
"Se va adăuga un poligon (poate fi împărțit în mai multe părți)\n"
"care va înconjura traseele Gerber la o anumită distanță."

#: AppTools/ToolCopperThieving.py:388
msgid "Insert Robber Bar"
msgstr "Inserați Rober Bar"

#: AppTools/ToolCopperThieving.py:390
msgid ""
"Will add a polygon with a defined thickness\n"
"that will surround the actual Gerber object\n"
"at a certain distance.\n"
"Required when doing holes pattern plating."
msgstr ""
"Se va adăuga un poligon cu o grosime definită\n"
"care va înconjura obiectul Gerber\n"
"la o anumită distanță.\n"
"Necesar atunci când faceți placare găuri cu model."

#: AppTools/ToolCopperThieving.py:414
msgid "Select Soldermask object"
msgstr "Selectați obiectul Soldermask"

#: AppTools/ToolCopperThieving.py:416
msgid ""
"Gerber Object with the soldermask.\n"
"It will be used as a base for\n"
"the pattern plating mask."
msgstr ""
"Obiect Gerber cu Soldermask.\n"
"Acesta va fi folosit ca bază pentru\n"
"generarea de masca pentru placare cu model."

#: AppTools/ToolCopperThieving.py:445
msgid "Plated area"
msgstr "Zona placată"

#: AppTools/ToolCopperThieving.py:447
msgid ""
"The area to be plated by pattern plating.\n"
"Basically is made from the openings in the plating mask.\n"
"\n"
"<<WARNING>> - the calculated area is actually a bit larger\n"
"due of the fact that the soldermask openings are by design\n"
"a bit larger than the copper pads, and this area is\n"
"calculated from the soldermask openings."
msgstr ""
"Zona de placat prin placare cu model.\n"
"Practic este realizată din deschiderile din masca de placare.\n"
"\n"
"<<AVERTISMENT>> - suprafața calculată este de fapt un pic mai mare\n"
"datorită faptului că deschiderile de soldermask sunt prin design\n"
"un pic mai mari decât padurile de cupru, iar această zonă este\n"
"calculată din deschiderile soldermask."

#: AppTools/ToolCopperThieving.py:458
msgid "mm"
msgstr "mm"

#: AppTools/ToolCopperThieving.py:460
msgid "in"
msgstr "in"

#: AppTools/ToolCopperThieving.py:467
msgid "Generate pattern plating mask"
msgstr "Generați mască de placare cu model"

#: AppTools/ToolCopperThieving.py:469
msgid ""
"Will add to the soldermask gerber geometry\n"
"the geometries of the copper thieving and/or\n"
"the robber bar if those were generated."
msgstr ""
"Se va adăuga la geometria soldermask Gerber \n"
"geometriile Copper Thieving și / sau\n"
"Robber Bar dacă acestea au fost generate."

#: AppTools/ToolCopperThieving.py:625 AppTools/ToolCopperThieving.py:650
msgid "Lines Grid works only for 'itself' reference ..."
msgstr "Gridul de Linii funcționează numai pentru referința „în sine” ..."

#: AppTools/ToolCopperThieving.py:636
msgid "Solid fill selected."
msgstr "Umplere solidă selectată."

#: AppTools/ToolCopperThieving.py:641
msgid "Dots grid fill selected."
msgstr "Umplere Grila de Puncte selectată."

#: AppTools/ToolCopperThieving.py:646
msgid "Squares grid fill selected."
msgstr "Umplere Grila de Pătrate selectată."

#: AppTools/ToolCopperThieving.py:667 AppTools/ToolCopperThieving.py:749
#: AppTools/ToolCopperThieving.py:1351 AppTools/ToolCorners.py:251
#: AppTools/ToolDblSided.py:657 AppTools/ToolExtractDrills.py:436
#: AppTools/ToolFiducials.py:467 AppTools/ToolFiducials.py:744
#: AppTools/ToolOptimal.py:342 AppTools/ToolPunchGerber.py:512
#: AppTools/ToolQRCode.py:426
msgid "There is no Gerber object loaded ..."
msgstr "Nu este nici-un obiect Gerber incărcat ..."

#: AppTools/ToolCopperThieving.py:680 AppTools/ToolCopperThieving.py:1279
msgid "Append geometry"
msgstr "Adăugați geometria"

#: AppTools/ToolCopperThieving.py:724 AppTools/ToolCopperThieving.py:1312
#: AppTools/ToolCopperThieving.py:1465
msgid "Append source file"
msgstr "Adăugați fișierul sursă"

#: AppTools/ToolCopperThieving.py:732 AppTools/ToolCopperThieving.py:1320
msgid "Copper Thieving Tool done."
msgstr "Unealta Copper Thieving efectuata."

#: AppTools/ToolCopperThieving.py:759 AppTools/ToolCopperThieving.py:792
#: AppTools/ToolCutOut.py:519 AppTools/ToolCutOut.py:724
#: AppTools/ToolInvertGerber.py:208 AppTools/ToolNCC.py:1599
#: AppTools/ToolNCC.py:1641 AppTools/ToolNCC.py:1670 AppTools/ToolPaint.py:1473
#: AppTools/ToolPanelize.py:423 AppTools/ToolPanelize.py:437
#: AppTools/ToolSub.py:294 AppTools/ToolSub.py:307 AppTools/ToolSub.py:498
#: AppTools/ToolSub.py:513 tclCommands/TclCommandCopperClear.py:97
#: tclCommands/TclCommandPaint.py:99
msgid "Could not retrieve object"
msgstr "Nu s-a putut incărca obiectul"

#: AppTools/ToolCopperThieving.py:769 AppTools/ToolNCC.py:1649 Common.py:200
msgid "Click the start point of the area."
msgstr "Faceți clic pe punctul de pornire al zonei."

#: AppTools/ToolCopperThieving.py:820
msgid "Click the end point of the filling area."
msgstr "Faceți clic pe punctul final al zonei de umplere."

#: AppTools/ToolCopperThieving.py:826 AppTools/ToolNCC.py:1711
#: AppTools/ToolNCC.py:1763 AppTools/ToolPaint.py:1605
#: AppTools/ToolPaint.py:1656 Common.py:256 Common.py:356
msgid "Zone added. Click to start adding next zone or right click to finish."
msgstr ""
"Zona adăugată. Faceți clic stanga pt a continua adăugarea de zone sau click "
"dreapta pentru a termina."

#: AppTools/ToolCopperThieving.py:948 AppTools/ToolCopperThieving.py:952
#: AppTools/ToolCopperThieving.py:1013
msgid "Thieving"
msgstr "Thieving"

#: AppTools/ToolCopperThieving.py:959
msgid "Copper Thieving Tool started. Reading parameters."
msgstr "Unealta Thieving Tool a pornit. Se citesc parametrii."

#: AppTools/ToolCopperThieving.py:984
msgid "Copper Thieving Tool. Preparing isolation polygons."
msgstr "Unealta Thieving Tool. Se pregătesc poligoanele de isolare."

#: AppTools/ToolCopperThieving.py:1029
msgid "Copper Thieving Tool. Preparing areas to fill with copper."
msgstr "Unealta Thieving Tool. Se pregătesc zonele de umplut cu cupru."

#: AppTools/ToolCopperThieving.py:1040 AppTools/ToolOptimal.py:349
#: AppTools/ToolPanelize.py:810 AppTools/ToolRulesCheck.py:1127
msgid "Working..."
msgstr "Se lucrează..."

#: AppTools/ToolCopperThieving.py:1067
msgid "Geometry not supported for bounding box"
msgstr "Geometria nu este acceptată pentru caseta de delimitare"

#: AppTools/ToolCopperThieving.py:1073 AppTools/ToolNCC.py:1942
#: AppTools/ToolNCC.py:1997 AppTools/ToolNCC.py:3038 AppTools/ToolPaint.py:3385
msgid "No object available."
msgstr "Nici-un obiect disponibil."

#: AppTools/ToolCopperThieving.py:1110 AppTools/ToolNCC.py:1967
#: AppTools/ToolNCC.py:2020 AppTools/ToolNCC.py:3080
msgid "The reference object type is not supported."
msgstr "Tipul de obiect de referintă nu este acceptat."

#: AppTools/ToolCopperThieving.py:1115
msgid "Copper Thieving Tool. Appending new geometry and buffering."
msgstr ""
"Unealta Copper Thieving. Se adauga o noua geometrie si se fuzioneaza acestea."

#: AppTools/ToolCopperThieving.py:1131
msgid "Create geometry"
msgstr "Creați geometrie"

#: AppTools/ToolCopperThieving.py:1331 AppTools/ToolCopperThieving.py:1335
msgid "P-Plating Mask"
msgstr "Mască M-Placare"

#: AppTools/ToolCopperThieving.py:1357
msgid "Append PP-M geometry"
msgstr "Adaugă geometrie mască PM"

#: AppTools/ToolCopperThieving.py:1483
msgid "Generating Pattern Plating Mask done."
msgstr "Generarea măștii de placare cu model efectuată."

#: AppTools/ToolCopperThieving.py:1555
msgid "Copper Thieving Tool exit."
msgstr "Unealta Copper Thieving terminata."

#: AppTools/ToolCorners.py:57
#, fuzzy
#| msgid "Gerber Object to which will be added a copper thieving."
msgid "The Gerber object that to which will be added corner markers."
msgstr "Obiect Gerber căruia i se va adăuga Copper Thieving."

#: AppTools/ToolCorners.py:73
#, fuzzy
#| msgid "Location"
msgid "Locations"
msgstr "Locaţie"

#: AppTools/ToolCorners.py:75
msgid "Locations where to place corner markers."
msgstr ""

#: AppTools/ToolCorners.py:92 AppTools/ToolFiducials.py:99
msgid "Top Right"
msgstr "Dreapta-sus"

#: AppTools/ToolCorners.py:158
#, fuzzy
#| msgid "Add area"
msgid "Add Marker"
msgstr "Adaugă Zonă"

#: AppTools/ToolCorners.py:160
msgid "Will add corner markers to the selected Gerber file."
msgstr ""

#: AppTools/ToolCorners.py:225
#, fuzzy
#| msgid "QRCode Tool"
msgid "Corners Tool"
msgstr "Unealta QRCode"

#: AppTools/ToolCorners.py:288
msgid "Please select at least a location"
msgstr ""

#: AppTools/ToolCorners.py:423
#, fuzzy
#| msgid "Copper Thieving Tool exit."
msgid "Corners Tool exit."
msgstr "Unealta Copper Thieving terminata."

#: AppTools/ToolCutOut.py:41
msgid "Cutout PCB"
msgstr "Decupare PCB"

#: AppTools/ToolCutOut.py:69 AppTools/ToolPanelize.py:53
msgid "Source Object"
msgstr "Obiect Sursă"

#: AppTools/ToolCutOut.py:70
msgid "Object to be cutout"
msgstr "Obiect care trebuie decupat"

#: AppTools/ToolCutOut.py:75
msgid "Kind"
msgstr "Fel"

#: AppTools/ToolCutOut.py:97
msgid ""
"Specify the type of object to be cutout.\n"
"It can be of type: Gerber or Geometry.\n"
"What is selected here will dictate the kind\n"
"of objects that will populate the 'Object' combobox."
msgstr ""
"Specifica obiectul care va fi decupat.\n"
"Poate fi de tip: Gerber sau Geometrie.\n"
"Ce se va selecta aici va controla tipul de \n"
"obiecte care vor aparea in combobox-ul\n"
"numit >Obiect<."

#: AppTools/ToolCutOut.py:121
msgid "Tool Parameters"
msgstr "Parametrii Unealtă"

#: AppTools/ToolCutOut.py:238
msgid "A. Automatic Bridge Gaps"
msgstr "A. Punţi realiz. automat"

#: AppTools/ToolCutOut.py:240
msgid "This section handle creation of automatic bridge gaps."
msgstr ""
"Aceasta sectiune va permite crearea in mod automat\n"
"a pana la 8 punţi."

#: AppTools/ToolCutOut.py:247
msgid ""
"Number of gaps used for the Automatic cutout.\n"
"There can be maximum 8 bridges/gaps.\n"
"The choices are:\n"
"- None  - no gaps\n"
"- lr    - left + right\n"
"- tb    - top + bottom\n"
"- 4     - left + right +top + bottom\n"
"- 2lr   - 2*left + 2*right\n"
"- 2tb  - 2*top + 2*bottom\n"
"- 8     - 2*left + 2*right +2*top + 2*bottom"
msgstr ""
"Numărul de punţi folosite in decupare.\n"
"Pot fi un număr maxim de 8 punţi aranjate in felul\n"
"următor:\n"
"- Nici unul - nu există spatii\n"
"- lr = stânga -dreapta\n"
"- tb = sus - jos\n"
"- 4 = stânga -dreapta - sus - jos\n"
"- 2lr = 2* stânga - 2* dreapta\n"
"- 2tb = 2* sus - 2* jos\n"
"- 8 = 2* stânga - 2* dreapta - 2* sus - 2* jos"

#: AppTools/ToolCutOut.py:269
msgid "Generate Freeform Geometry"
msgstr "Generați geometrie cu formă liberă"

#: AppTools/ToolCutOut.py:271
msgid ""
"Cutout the selected object.\n"
"The cutout shape can be of any shape.\n"
"Useful when the PCB has a non-rectangular shape."
msgstr ""
"Decupează obiectul selectat.\n"
"Forma decupajului poate avea orice forma.\n"
"Folositor când PCB-ul are o forma neregulata."

#: AppTools/ToolCutOut.py:283
msgid "Generate Rectangular Geometry"
msgstr "Generați geometrie dreptunghiulară"

#: AppTools/ToolCutOut.py:285
msgid ""
"Cutout the selected object.\n"
"The resulting cutout shape is\n"
"always a rectangle shape and it will be\n"
"the bounding box of the Object."
msgstr ""
"Decupează obiectul selectat.\n"
"Forma decupajului este tot timpul dreptunghiulara.."

#: AppTools/ToolCutOut.py:304
msgid "B. Manual Bridge Gaps"
msgstr "B. Punţi realiz. manual"

#: AppTools/ToolCutOut.py:306
msgid ""
"This section handle creation of manual bridge gaps.\n"
"This is done by mouse clicking on the perimeter of the\n"
"Geometry object that is used as a cutout object. "
msgstr ""
"Permite realizarea de punţi de sustinere in mod manual.\n"
"Se apasa butonul corepsunzator și apoi click cu mouse-ul\n"
"pe perimetrul formei de decupaj. Daca se face simultan cu\n"
"apasarea tastei CTRL, operatia se va repeta automat pana când\n"
"se va apasa tasta 'Escape'. "

#: AppTools/ToolCutOut.py:321
msgid "Geometry object used to create the manual cutout."
msgstr "Obiect tip Geometrie folosit pentru crearea decupajului manual."

#: AppTools/ToolCutOut.py:328
msgid "Generate Manual Geometry"
msgstr "Generați geometrie manuală"

#: AppTools/ToolCutOut.py:330
msgid ""
"If the object to be cutout is a Gerber\n"
"first create a Geometry that surrounds it,\n"
"to be used as the cutout, if one doesn't exist yet.\n"
"Select the source Gerber file in the top object combobox."
msgstr ""
"Daca obiectul care se decupează este un obiect Gerber,\n"
"atunci mai intai crează un obiect Geometrie care il inconjoara\n"
"urmărindu-i forma.\n"
"Selectează obiectul sursa Gerber in combobox-ul de mai sus,\n"
"numit >Obiect<."

#: AppTools/ToolCutOut.py:343
msgid "Manual Add Bridge Gaps"
msgstr "Adaugă punţi manual"

#: AppTools/ToolCutOut.py:345
msgid ""
"Use the left mouse button (LMB) click\n"
"to create a bridge gap to separate the PCB from\n"
"the surrounding material.\n"
"The LMB click has to be done on the perimeter of\n"
"the Geometry object used as a cutout geometry."
msgstr ""
"Permite realizarea de punţi de sustinere in mod manual.\n"
"Se apasa butonul corepsunzator și apoi click cu mouse-ul\n"
"pe perimetrul formei de decupaj. Daca se face simultan cu\n"
"apasarea tastei CTRL, operatia se va repeta automat pana când\n"
"se va apasa tasta 'Escape'."

#: AppTools/ToolCutOut.py:524
msgid ""
"There is no object selected for Cutout.\n"
"Select one and try again."
msgstr ""
"Nu este nici-un obiect selectat pentru decupaj.\n"
"Selectează unul și încearcă din nou."

#: AppTools/ToolCutOut.py:530 AppTools/ToolCutOut.py:733
#: AppTools/ToolCutOut.py:914 AppTools/ToolCutOut.py:996
#: tclCommands/TclCommandGeoCutout.py:184
msgid "Tool Diameter is zero value. Change it to a positive real number."
msgstr "Diametrul uneltei este zero. Schimbă intr-o valoare pozitivă Reală."

#: AppTools/ToolCutOut.py:544 AppTools/ToolCutOut.py:748
msgid "Number of gaps value is missing. Add it and retry."
msgstr ""
"Numărul de punţi lipseste sau este in format gresit. Adaugă din nou și "
"reîncearcă."

#: AppTools/ToolCutOut.py:549 AppTools/ToolCutOut.py:752
msgid ""
"Gaps value can be only one of: 'None', 'lr', 'tb', '2lr', '2tb', 4 or 8. "
"Fill in a correct value and retry. "
msgstr ""
"Valoarea spatiilor poate fi doar una dintre: „Niciuna”, „lr”, „tb”, „2lr”, "
"„2tb”, 4 sau 8. Completați o valoare corectă și încercați din nou. "

#: AppTools/ToolCutOut.py:554 AppTools/ToolCutOut.py:758
msgid ""
"Cutout operation cannot be done on a multi-geo Geometry.\n"
"Optionally, this Multi-geo Geometry can be converted to Single-geo "
"Geometry,\n"
"and after that perform Cutout."
msgstr ""
"Operatia de decupaj nu se poate efectua cu un obiect Geometrie tip "
"MultiGeo.\n"
"Se poate insa converti MultiGeo in tip SingleGeo și apoi se poate efectua "
"decupajul."

#: AppTools/ToolCutOut.py:706 AppTools/ToolCutOut.py:903
msgid "Any form CutOut operation finished."
msgstr "Operatia de decupaj cu formă liberă s-a terminat."

#: AppTools/ToolCutOut.py:728 AppTools/ToolInvertGerber.py:214
#: AppTools/ToolNCC.py:1603 AppTools/ToolPaint.py:1396
#: AppTools/ToolPanelize.py:428 tclCommands/TclCommandBbox.py:71
#: tclCommands/TclCommandNregions.py:71
msgid "Object not found"
msgstr "Obiectul nu a fost gasit"

#: AppTools/ToolCutOut.py:872
msgid "Rectangular cutout with negative margin is not possible."
msgstr "Tăierea rectangulară cu marginea negativă nu este posibilă."

#: AppTools/ToolCutOut.py:908
msgid ""
"Click on the selected geometry object perimeter to create a bridge gap ..."
msgstr ""
"Click pe perimetrul obiectului tip Geometrie selectat\n"
"pentru a crea o punte separatoare."

#: AppTools/ToolCutOut.py:925 AppTools/ToolCutOut.py:951
msgid "Could not retrieve Geometry object"
msgstr "Nu s-a putut incărca obiectul Geometrie"

#: AppTools/ToolCutOut.py:956
msgid "Geometry object for manual cutout not found"
msgstr "Obiectul Geometrie pentru decupaj manual nu este găsit"

#: AppTools/ToolCutOut.py:966
msgid "Added manual Bridge Gap."
msgstr "O punte a fost adăugată in mod manual."

#: AppTools/ToolCutOut.py:978
msgid "Could not retrieve Gerber object"
msgstr "Nu s-a putut incărca obiectul Gerber"

#: AppTools/ToolCutOut.py:983
msgid ""
"There is no Gerber object selected for Cutout.\n"
"Select one and try again."
msgstr ""
"Nu există obiect selectat pt operatia de decupare.\n"
"Selectează un obiect si incearcă din nou."

#: AppTools/ToolCutOut.py:989
msgid ""
"The selected object has to be of Gerber type.\n"
"Select a Gerber file and try again."
msgstr ""
"Obiectul selectat trebuie să fie de tip Gerber.\n"
"Selectează un obiect Gerber si incearcă din nou."

#: AppTools/ToolCutOut.py:1024
msgid "Geometry not supported for cutout"
msgstr "Geometria nu este acceptată pentru decupaj"

#: AppTools/ToolCutOut.py:1099
msgid "Making manual bridge gap..."
msgstr "Se generează o punte separatoare in mod manual..."

#: AppTools/ToolDblSided.py:26
msgid "2-Sided PCB"
msgstr "2-fețe PCB"

#: AppTools/ToolDblSided.py:52
msgid "Mirror Operation"
msgstr "Operațiune Oglindire"

#: AppTools/ToolDblSided.py:53
msgid "Objects to be mirrored"
msgstr "Obiecte care vor fi Oglindite"

#: AppTools/ToolDblSided.py:65
msgid "Gerber to be mirrored"
msgstr "Gerber pentru oglindit"

#: AppTools/ToolDblSided.py:69 AppTools/ToolDblSided.py:97
#: AppTools/ToolDblSided.py:127
msgid ""
"Mirrors (flips) the specified object around \n"
"the specified axis. Does not create a new \n"
"object, but modifies it."
msgstr ""
"Oglindește obiectul specificat pe axa specificata.\n"
"Nu crează un obiect nou ci il modifica."

#: AppTools/ToolDblSided.py:93
msgid "Excellon Object to be mirrored."
msgstr "Obiectul Excellon care va fi oglindit."

#: AppTools/ToolDblSided.py:122
msgid "Geometry Obj to be mirrored."
msgstr "Obiectul Geometrie care va fi oglindit."

#: AppTools/ToolDblSided.py:158
msgid "Mirror Parameters"
msgstr "Parametrii Oglindire"

#: AppTools/ToolDblSided.py:159
msgid "Parameters for the mirror operation"
msgstr "Parametri pt operația de Oglindire"

#: AppTools/ToolDblSided.py:164
msgid "Mirror Axis"
msgstr "Axa Oglindire"

#: AppTools/ToolDblSided.py:175
msgid ""
"The coordinates used as reference for the mirror operation.\n"
"Can be:\n"
"- Point -> a set of coordinates (x,y) around which the object is mirrored\n"
"- Box -> a set of coordinates (x, y) obtained from the center of the\n"
"bounding box of another object selected below"
msgstr ""
"Coordinatele folosite ca referintă pentru operatia de Oglindire.\n"
"Pot fi:\n"
"- Punct -> un set de coordinate (x,y) in jurul cărora se va face oglindirea\n"
"- Cuie -> un set de coordinate (x,y) obtinute din centrul formei "
"inconjurătoare\n"
"al unui alt obiect, selectat mai jos"

#: AppTools/ToolDblSided.py:189
msgid "Point coordinates"
msgstr "Coordonatele Punct"

#: AppTools/ToolDblSided.py:194
msgid ""
"Add the coordinates in format <b>(x, y)</b> through which the mirroring "
"axis\n"
" selected in 'MIRROR AXIS' pass.\n"
"The (x, y) coordinates are captured by pressing SHIFT key\n"
"and left mouse button click on canvas or you can enter the coordinates "
"manually."
msgstr ""
"Adaugă coordonatele in formatul <b>(x, y)</b> prin care trece\n"
"axa de oglindire selectată mai sus, in pasul 'AXA OGLINDIRE'.\n"
"Coordonatele (x,y) pot fi obtinute prin combinatia tasta SHIFT + click mouse "
"pe\n"
"suprafata de afisare sau le puteti introduce manual."

#: AppTools/ToolDblSided.py:218
msgid ""
"It can be of type: Gerber or Excellon or Geometry.\n"
"The coordinates of the center of the bounding box are used\n"
"as reference for mirror operation."
msgstr ""
"Poate fi de tipul: Gerber, Excellon sau Geometrie.\n"
"Coordonatele centrului formei inconjurătoare sunt folosite\n"
"ca si referintă pentru operatiunea de Oglindire."

#: AppTools/ToolDblSided.py:252
msgid "Bounds Values"
msgstr "Valorile Limitelor"

#: AppTools/ToolDblSided.py:254
msgid ""
"Select on canvas the object(s)\n"
"for which to calculate bounds values."
msgstr ""
"Selectati pe suprafata de afisare obiectul(e)\n"
"pentru care se calculează valorile limitelor."

#: AppTools/ToolDblSided.py:264
msgid "X min"
msgstr "X min"

#: AppTools/ToolDblSided.py:266 AppTools/ToolDblSided.py:280
msgid "Minimum location."
msgstr "Locație minimă."

#: AppTools/ToolDblSided.py:278
msgid "Y min"
msgstr "Y min"

#: AppTools/ToolDblSided.py:292
msgid "X max"
msgstr "X max"

#: AppTools/ToolDblSided.py:294 AppTools/ToolDblSided.py:308
msgid "Maximum location."
msgstr "Locație maximă."

#: AppTools/ToolDblSided.py:306
msgid "Y max"
msgstr "Y max"

#: AppTools/ToolDblSided.py:317
msgid "Center point coordinates"
msgstr "Coordonatele punctului central"

#: AppTools/ToolDblSided.py:319
msgid "Centroid"
msgstr "Centroid"

#: AppTools/ToolDblSided.py:321
msgid ""
"The center point location for the rectangular\n"
"bounding shape. Centroid. Format is (x, y)."
msgstr ""
"Locația punctului central pentru dreptunghiul\n"
"formă de delimitare. Centroid. Formatul este (x, y)."

#: AppTools/ToolDblSided.py:330
msgid "Calculate Bounds Values"
msgstr "Calculați valorile limitelor"

#: AppTools/ToolDblSided.py:332
msgid ""
"Calculate the enveloping rectangular shape coordinates,\n"
"for the selection of objects.\n"
"The envelope shape is parallel with the X, Y axis."
msgstr ""
"Calculați coordonatele pt forma dreptunghiulară învelitoare,\n"
"pentru selectarea obiectelor.\n"
"Forma este paralelă cu axele X, Y."

#: AppTools/ToolDblSided.py:352
msgid "PCB Alignment"
msgstr "Aliniere PCB"

#: AppTools/ToolDblSided.py:354 AppTools/ToolDblSided.py:456
msgid ""
"Creates an Excellon Object containing the\n"
"specified alignment holes and their mirror\n"
"images."
msgstr ""
"Crează un obiect Excellon care contine găurile\n"
"de aliniere specificate cat și cele in oglinda."

#: AppTools/ToolDblSided.py:361
msgid "Drill Diameter"
msgstr "Dia Găurire"

#: AppTools/ToolDblSided.py:390 AppTools/ToolDblSided.py:397
msgid ""
"The reference point used to create the second alignment drill\n"
"from the first alignment drill, by doing mirror.\n"
"It can be modified in the Mirror Parameters -> Reference section"
msgstr ""
"Punctul de referintă folosit pentru crearea găurii de aliniere secundară,\n"
"din prima gaură de aliniere prin oglindire.\n"
"Poate fi modificat in Parametri Oglindire -> Sectiunea Referintă"

#: AppTools/ToolDblSided.py:410
msgid "Alignment Drill Coordinates"
msgstr "Dia. găuri de aliniere"

#: AppTools/ToolDblSided.py:412
msgid ""
"Alignment holes (x1, y1), (x2, y2), ... on one side of the mirror axis. For "
"each set of (x, y) coordinates\n"
"entered here, a pair of drills will be created:\n"
"\n"
"- one drill at the coordinates from the field\n"
"- one drill in mirror position over the axis selected above in the 'Align "
"Axis'."
msgstr ""
"Găuri de aliniere in formatul unei liste: (x1, y1), (x2, y2) samd.\n"
"Pentru fiecare punct din lista de mai sus (cu coord. (x,y) )\n"
"vor fi create o pereche de găuri:\n"
"- o gaură cu coord. specificate in campul de editare\n"
"- o gaură cu coord. in poziţia oglindită pe axa selectată mai sus in 'Axa "
"Aliniere'."

#: AppTools/ToolDblSided.py:420
msgid "Drill coordinates"
msgstr "Coordonatele găuri"

#: AppTools/ToolDblSided.py:427
msgid ""
"Add alignment drill holes coordinates in the format: (x1, y1), (x2, "
"y2), ... \n"
"on one side of the alignment axis.\n"
"\n"
"The coordinates set can be obtained:\n"
"- press SHIFT key and left mouse clicking on canvas. Then click Add.\n"
"- press SHIFT key and left mouse clicking on canvas. Then Ctrl+V in the "
"field.\n"
"- press SHIFT key and left mouse clicking on canvas. Then RMB click in the "
"field and click Paste.\n"
"- by entering the coords manually in the format: (x1, y1), (x2, y2), ..."
msgstr ""
"Adăugă coordonatele pt găurile de aliniere in formatul: (x1,y1), (x2,y2) "
"samd\n"
"\n"
"Coordonatele pot fi obtinute prin urmatoarele metodă:\n"
"- apăsare tasta SHIFT + click mouse pe canvas. Apoi apasa butonul 'Adaugă'.\n"
"- apăsare tasta SHIFT + click mouse pe canvas. Apoi CTRL + V combo in câmpul "
"de editare\n"
"- apăsare tasta SHIFT + click mouse pe canvas. Apoi click dreapta și Paste "
"in câmpul de edit.\n"
"- se introduc manual in formatul (x1,y1), (x2,y2) ..."

#: AppTools/ToolDblSided.py:442
msgid "Delete Last"
msgstr "Șterge Ultima"

#: AppTools/ToolDblSided.py:444
msgid "Delete the last coordinates tuple in the list."
msgstr "Șterge ultimul set de coordinate din listă."

#: AppTools/ToolDblSided.py:454
msgid "Create Excellon Object"
msgstr "Crează un obiect Excellon"

#: AppTools/ToolDblSided.py:541
msgid "2-Sided Tool"
msgstr "Unealta 2-fețe"

#: AppTools/ToolDblSided.py:581
msgid ""
"'Point' reference is selected and 'Point' coordinates are missing. Add them "
"and retry."
msgstr ""
"Referința 'Punct' este selectată dar coordonatele sale lipsesc. Adăugă-le si "
"încearcă din nou."

#: AppTools/ToolDblSided.py:600
msgid "There is no Box reference object loaded. Load one and retry."
msgstr ""
"Nici-un obiect container nu este incărcat. Încarcă unul și încearcă din nou."

#: AppTools/ToolDblSided.py:612
msgid "No value or wrong format in Drill Dia entry. Add it and retry."
msgstr ""
"Val. pt dia burghiu lipseste sau este in format gresit. Adaugă una și "
"încearcă din nou."

#: AppTools/ToolDblSided.py:623
msgid "There are no Alignment Drill Coordinates to use. Add them and retry."
msgstr ""
"Nu exista coord. pentru găurile de aliniere. Adaugă-le și încearcă din nou."

#: AppTools/ToolDblSided.py:648
msgid "Excellon object with alignment drills created..."
msgstr "Obiectul Excellon conținând găurile de aliniere a fost creat ..."

#: AppTools/ToolDblSided.py:661 AppTools/ToolDblSided.py:704
#: AppTools/ToolDblSided.py:748
msgid "Only Gerber, Excellon and Geometry objects can be mirrored."
msgstr "Doar obiectele de tip Geometrie, Excellon și Gerber pot fi oglindite."

#: AppTools/ToolDblSided.py:671 AppTools/ToolDblSided.py:715
msgid ""
"There are no Point coordinates in the Point field. Add coords and try "
"again ..."
msgstr ""
"Nu există coord. in câmpul 'Punct'. Adaugă coord. și încearcă din nou..."

#: AppTools/ToolDblSided.py:681 AppTools/ToolDblSided.py:725
#: AppTools/ToolDblSided.py:762
msgid "There is no Box object loaded ..."
msgstr "Nu este incărcat nici-un obiect container ..."

#: AppTools/ToolDblSided.py:691 AppTools/ToolDblSided.py:735
#: AppTools/ToolDblSided.py:772
msgid "was mirrored"
msgstr "a fost oglindit"

#: AppTools/ToolDblSided.py:700 AppTools/ToolPunchGerber.py:533
msgid "There is no Excellon object loaded ..."
msgstr "Nici-un obiect tip Excellon nu este incărcat ..."

#: AppTools/ToolDblSided.py:744
msgid "There is no Geometry object loaded ..."
msgstr "Nici-un obiect tip Geometrie nu este incărcat ..."

#: AppTools/ToolDblSided.py:818 App_Main.py:4572 App_Main.py:4727
msgid "Failed. No object(s) selected..."
msgstr "Eșuat. Nici-un obiect nu este selectat."

#: AppTools/ToolDistance.py:57 AppTools/ToolDistanceMin.py:50
msgid "Those are the units in which the distance is measured."
msgstr "Unitatile de masura in care se masoara distanța."

#: AppTools/ToolDistance.py:58 AppTools/ToolDistanceMin.py:51
msgid "METRIC (mm)"
msgstr "Metric (mm)"

#: AppTools/ToolDistance.py:58 AppTools/ToolDistanceMin.py:51
msgid "INCH (in)"
msgstr "INCH (in)"

#: AppTools/ToolDistance.py:64
msgid "Snap to center"
msgstr "Sari in Centru"

#: AppTools/ToolDistance.py:66
msgid ""
"Mouse cursor will snap to the center of the pad/drill\n"
"when it is hovering over the geometry of the pad/drill."
msgstr ""
"Cursorul mouse-ului va sari (automat) pozitionandu-se in centrul padului/"
"găurii\n"
"atunci cand se găseste deasupra geometriei acelui pad/gaură."

#: AppTools/ToolDistance.py:76
msgid "Start Coords"
msgstr "Coordonate Start"

#: AppTools/ToolDistance.py:77 AppTools/ToolDistance.py:82
msgid "This is measuring Start point coordinates."
msgstr "Coordonatele punctului de Start."

#: AppTools/ToolDistance.py:87
msgid "Stop Coords"
msgstr "Coordonate Stop"

#: AppTools/ToolDistance.py:88 AppTools/ToolDistance.py:93
msgid "This is the measuring Stop point coordinates."
msgstr "Coordonatele punctului de Stop."

#: AppTools/ToolDistance.py:98 AppTools/ToolDistanceMin.py:62
msgid "Dx"
msgstr "Dx"

#: AppTools/ToolDistance.py:99 AppTools/ToolDistance.py:104
#: AppTools/ToolDistanceMin.py:63 AppTools/ToolDistanceMin.py:92
msgid "This is the distance measured over the X axis."
msgstr "Distanta masurata pe axa X."

#: AppTools/ToolDistance.py:109 AppTools/ToolDistanceMin.py:65
msgid "Dy"
msgstr "Dy"

#: AppTools/ToolDistance.py:110 AppTools/ToolDistance.py:115
#: AppTools/ToolDistanceMin.py:66 AppTools/ToolDistanceMin.py:97
msgid "This is the distance measured over the Y axis."
msgstr "Distanta masurata pe axa Y."

#: AppTools/ToolDistance.py:121 AppTools/ToolDistance.py:126
#: AppTools/ToolDistanceMin.py:69 AppTools/ToolDistanceMin.py:102
msgid "This is orientation angle of the measuring line."
msgstr "Acesta este unghiul de orientare al liniei de măsurare."

#: AppTools/ToolDistance.py:131 AppTools/ToolDistanceMin.py:71
msgid "DISTANCE"
msgstr "DISTANTA"

#: AppTools/ToolDistance.py:132 AppTools/ToolDistance.py:137
msgid "This is the point to point Euclidian distance."
msgstr "Distanta euclidiana de la punct la punct."

#: AppTools/ToolDistance.py:142 AppTools/ToolDistance.py:339
#: AppTools/ToolDistanceMin.py:114
msgid "Measure"
msgstr "Măsoară"

#: AppTools/ToolDistance.py:274
msgid "Working"
msgstr "Se lucrează"

#: AppTools/ToolDistance.py:279
msgid "MEASURING: Click on the Start point ..."
msgstr "Masoara: Click pe punctul de Start ..."

#: AppTools/ToolDistance.py:389
msgid "Distance Tool finished."
msgstr "Măsurătoarea s-a terminat."

#: AppTools/ToolDistance.py:461
msgid "Pads overlapped. Aborting."
msgstr "Pad-urile sunt suprapuse. Operatie anulată."

#: AppTools/ToolDistance.py:489
#, fuzzy
#| msgid "Distance Tool finished."
msgid "Distance Tool cancelled."
msgstr "Măsurătoarea s-a terminat."

#: AppTools/ToolDistance.py:494
msgid "MEASURING: Click on the Destination point ..."
msgstr "Masoara: Click pe punctul Destinaţie..."

#: AppTools/ToolDistance.py:503 AppTools/ToolDistanceMin.py:284
msgid "MEASURING"
msgstr "MĂSURARE"

#: AppTools/ToolDistance.py:504 AppTools/ToolDistanceMin.py:285
msgid "Result"
msgstr "Rezultat"

#: AppTools/ToolDistanceMin.py:31 AppTools/ToolDistanceMin.py:143
msgid "Minimum Distance Tool"
msgstr "Unealta de distanță minimă"

#: AppTools/ToolDistanceMin.py:54
msgid "First object point"
msgstr "Primul punct"

#: AppTools/ToolDistanceMin.py:55 AppTools/ToolDistanceMin.py:80
msgid ""
"This is first object point coordinates.\n"
"This is the start point for measuring distance."
msgstr ""
"Aceasta este prima coordonată a punctelor obiectului.\n"
"Acesta este punctul de pornire pentru măsurarea distanței."

#: AppTools/ToolDistanceMin.py:58
msgid "Second object point"
msgstr "Al doilea punct"

#: AppTools/ToolDistanceMin.py:59 AppTools/ToolDistanceMin.py:86
msgid ""
"This is second object point coordinates.\n"
"This is the end point for measuring distance."
msgstr ""
"Aceasta este a doua coordonata a punctelor obiectului.\n"
"Acesta este punctul final pentru măsurarea distanței."

#: AppTools/ToolDistanceMin.py:72 AppTools/ToolDistanceMin.py:107
msgid "This is the point to point Euclidean distance."
msgstr "Distanta euclidiana de la punct la punct."

#: AppTools/ToolDistanceMin.py:74
msgid "Half Point"
msgstr "Punctul de mijloc"

#: AppTools/ToolDistanceMin.py:75 AppTools/ToolDistanceMin.py:112
msgid "This is the middle point of the point to point Euclidean distance."
msgstr "Acesta este punctul de mijloc al distanței euclidiană."

#: AppTools/ToolDistanceMin.py:117
msgid "Jump to Half Point"
msgstr "Sari la Punctul de Mijloc"

#: AppTools/ToolDistanceMin.py:154
msgid ""
"Select two objects and no more, to measure the distance between them ..."
msgstr ""
"Selectați două obiecte și nu mai mult, pentru a măsura distanța dintre "
"ele ..."

#: AppTools/ToolDistanceMin.py:195 AppTools/ToolDistanceMin.py:216
#: AppTools/ToolDistanceMin.py:225 AppTools/ToolDistanceMin.py:246
msgid "Select two objects and no more. Currently the selection has objects: "
msgstr ""
"Selectați două obiecte și nu mai mult. În prezent, selecția are nr obiecte: "

#: AppTools/ToolDistanceMin.py:293
msgid "Objects intersects or touch at"
msgstr "Obiectele se intersectează sau ating la"

#: AppTools/ToolDistanceMin.py:299
msgid "Jumped to the half point between the two selected objects"
msgstr "A sărit la jumătatea punctului dintre cele două obiecte selectate"

#: AppTools/ToolExtractDrills.py:29 AppTools/ToolExtractDrills.py:295
msgid "Extract Drills"
msgstr "Extrage Găuri"

#: AppTools/ToolExtractDrills.py:62
msgid "Gerber from which to extract drill holes"
msgstr "Obiect Gerber din care se vor extrage găurile"

#: AppTools/ToolExtractDrills.py:297
msgid "Extract drills from a given Gerber file."
msgstr "Extrage găuri dintr-un fisier Gerber."

#: AppTools/ToolExtractDrills.py:478 AppTools/ToolExtractDrills.py:563
#: AppTools/ToolExtractDrills.py:648
msgid "No drills extracted. Try different parameters."
msgstr "Nu s-au extras găuri. Incearcă alti parametri."

#: AppTools/ToolFiducials.py:56
msgid "Fiducials Coordinates"
msgstr "Coordonatele Fiducials"

#: AppTools/ToolFiducials.py:58
msgid ""
"A table with the fiducial points coordinates,\n"
"in the format (x, y)."
msgstr ""
"Un tabel cu coordonatele punctelor fiduțiale,\n"
"în format (x, y)."

#: AppTools/ToolFiducials.py:191
msgid ""
"- 'Auto' - automatic placement of fiducials in the corners of the bounding "
"box.\n"
" - 'Manual' - manual placement of fiducials."
msgstr ""
"- „Auto” - plasarea automată a fiduciarelor în colțurile casetei de "
"delimitare.\n"
"  - „Manual” - plasarea manuală a fiduciarelor."

#: AppTools/ToolFiducials.py:237
msgid "Thickness of the line that makes the fiducial."
msgstr ""

#: AppTools/ToolFiducials.py:259
msgid "Copper Gerber"
msgstr "Gerber Cupru"

#: AppTools/ToolFiducials.py:268
msgid "Add Fiducial"
msgstr "Adaugă Fiducial"

#: AppTools/ToolFiducials.py:270
msgid "Will add a polygon on the copper layer to serve as fiducial."
msgstr ""
"Va adăuga un poligon pe stratul de cupru pentru a servi drept fiduciar."

#: AppTools/ToolFiducials.py:286
msgid "Soldermask Gerber"
msgstr "Gerber Soldermask"

#: AppTools/ToolFiducials.py:288
msgid "The Soldermask Gerber object."
msgstr "Obiectul Soldermask Gerber."

#: AppTools/ToolFiducials.py:300
msgid "Add Soldermask Opening"
msgstr "Adăugați deschidere Soldermask"

#: AppTools/ToolFiducials.py:302
msgid ""
"Will add a polygon on the soldermask layer\n"
"to serve as fiducial opening.\n"
"The diameter is always double of the diameter\n"
"for the copper fiducial."
msgstr ""
"Se va adăuga un poligon pe stratul de Soldermask\n"
"pentru a servi drept deschidere fiduciară.\n"
"Diametrul este întotdeauna dublu față de diametrul\n"
"pentru fiduciarul de cupru."

#: AppTools/ToolFiducials.py:517
msgid "Click to add first Fiducial. Bottom Left..."
msgstr "Faceți clic pentru a adăuga primul Fiducial. Stânga jos..."

#: AppTools/ToolFiducials.py:781
msgid "Click to add the last fiducial. Top Right..."
msgstr "Faceți clic pentru a adăuga ultimul Fiducial. Dreapta Sus..."

#: AppTools/ToolFiducials.py:786
msgid "Click to add the second fiducial. Top Left or Bottom Right..."
msgstr ""
"Faceți clic pentru a adăuga cel de-al doilea Fiducial. Stânga sus sau "
"dreapta jos ..."

#: AppTools/ToolFiducials.py:789 AppTools/ToolFiducials.py:798
msgid "Done. All fiducials have been added."
msgstr "Terminat. Au fost adăugate toate Fiducials."

#: AppTools/ToolFiducials.py:875
msgid "Fiducials Tool exit."
msgstr "Unealta Fiducials terminate."

#: AppTools/ToolFilm.py:42
msgid "Film PCB"
msgstr "Film PCB"

#: AppTools/ToolFilm.py:73
msgid ""
"Specify the type of object for which to create the film.\n"
"The object can be of type: Gerber or Geometry.\n"
"The selection here decide the type of objects that will be\n"
"in the Film Object combobox."
msgstr ""
"Specificati tipul de obiect pt care se va crea filmul.\n"
"Obiectul poate avea tipul: Gerber sau Geometrie.\n"
"Selectia facuta aici controlează ce obiecte vor fi \n"
"gasite in combobox-ul >Obiect Film<."

#: AppTools/ToolFilm.py:96
msgid ""
"Specify the type of object to be used as an container for\n"
"film creation. It can be: Gerber or Geometry type.The selection here decide "
"the type of objects that will be\n"
"in the Box Object combobox."
msgstr ""
"Specificati tipul obiectului care să fie folosit ca și container\n"
"pt crearea filmului. Poate fi de tipul Geometrie sau Gerber.\n"
"Selectia facuta aici controlează ce obiecte vor fi \n"
"gasite in combobox-ul >Container<."

#: AppTools/ToolFilm.py:256
msgid "Film Parameters"
msgstr "Parametrii filmului"

#: AppTools/ToolFilm.py:317
msgid "Punch drill holes"
msgstr "Perforează găurii"

#: AppTools/ToolFilm.py:318
msgid ""
"When checked the generated film will have holes in pads when\n"
"the generated film is positive. This is done to help drilling,\n"
"when done manually."
msgstr ""
"Când este bifat, filmul generat va avea găuri în pad-uri când\n"
"filmul generat este pozitiv. Acest lucru este realizat pentru a ajuta la "
"găurire,\n"
"când este făcută manual."

#: AppTools/ToolFilm.py:336
msgid "Source"
msgstr "Sursă"

#: AppTools/ToolFilm.py:338
msgid ""
"The punch hole source can be:\n"
"- Excellon -> an Excellon holes center will serve as reference.\n"
"- Pad Center -> will try to use the pads center as reference."
msgstr ""
"Sursa de perforare poate fi:\n"
"- Excellon -> centrul găurilor Excellon va servi ca referință.\n"
"- Centru Pad-> va încerca să utilizeze centrul de pad-uri ca referință."

#: AppTools/ToolFilm.py:343
msgid "Pad center"
msgstr "Centru Pad"

#: AppTools/ToolFilm.py:348
msgid "Excellon Obj"
msgstr "Obiect Excellon"

#: AppTools/ToolFilm.py:350
msgid ""
"Remove the geometry of Excellon from the Film to create the holes in pads."
msgstr ""
"Îndepărtați geometria Excellon din film pentru a crea găurile din pad-uri."

#: AppTools/ToolFilm.py:364
msgid "Punch Size"
msgstr "Mărimea Perforatii"

#: AppTools/ToolFilm.py:365
msgid "The value here will control how big is the punch hole in the pads."
msgstr ""
"Valoarea de aici va controla cât de mare este gaura de perforare în pad-uri."

#: AppTools/ToolFilm.py:485
msgid "Save Film"
msgstr "Salveaa filmul"

#: AppTools/ToolFilm.py:487
msgid ""
"Create a Film for the selected object, within\n"
"the specified box. Does not create a new \n"
" FlatCAM object, but directly save it in the\n"
"selected format."
msgstr ""
"Crează un film pt obiectul selectat, in cadrul obiectului\n"
"container selectat. Nu crează un obiect nou FlatCAM ci\n"
"salvează pe HDD un fişier in formatul selectat."

#: AppTools/ToolFilm.py:649
msgid ""
"Using the Pad center does not work on Geometry objects. Only a Gerber object "
"has pads."
msgstr ""
"Utilizarea centrului Pad nu funcționează pe obiecte de Geometrie. Doar un "
"obiect Gerber are pad-uri."

#: AppTools/ToolFilm.py:659
msgid "No FlatCAM object selected. Load an object for Film and retry."
msgstr ""
"Nici-un obiect FlaCAM nu este selectat. Incarcă un obiect pt Film și "
"încearcă din nou."

#: AppTools/ToolFilm.py:666
msgid "No FlatCAM object selected. Load an object for Box and retry."
msgstr ""
"Nici-un obiect FlatCAM nu este selectat. Încarcă un obiect container și "
"încearcă din nou."

#: AppTools/ToolFilm.py:670
msgid "No FlatCAM object selected."
msgstr "Nici-un obiect nu este selectat."

#: AppTools/ToolFilm.py:681
msgid "Generating Film ..."
msgstr "Se generează Film-ul ..."

#: AppTools/ToolFilm.py:730 AppTools/ToolFilm.py:734
msgid "Export positive film"
msgstr "Export film pozitiv"

#: AppTools/ToolFilm.py:767
msgid ""
"No Excellon object selected. Load an object for punching reference and retry."
msgstr ""
"Nici-un obiect Excellon nu este selectat. Incarcă un obiect ca referinta "
"pentru perforare și încearcă din nou."

#: AppTools/ToolFilm.py:791
msgid ""
" Could not generate punched hole film because the punch hole sizeis bigger "
"than some of the apertures in the Gerber object."
msgstr ""
" Nu a putut genera un film cu găuri perforate, deoarece dimensiunea găurii "
"de perforare este mai mare decât unele dintre aperturile din obiectul Gerber."

#: AppTools/ToolFilm.py:803
msgid ""
"Could not generate punched hole film because the punch hole sizeis bigger "
"than some of the apertures in the Gerber object."
msgstr ""
"Nu s-a putut genera un film cu găuri perforate, deoarece dimensiunea găurii "
"de perforare este mai mare decât unele dintre aperturile din obiectul Gerber."

#: AppTools/ToolFilm.py:821
msgid ""
"Could not generate punched hole film because the newly created object "
"geometry is the same as the one in the source object geometry..."
msgstr ""
"Nu s-a putut genera Film cu găuri perforate, deoarece geometria obiectului "
"nou creat este aceeași cu cea din geometria obiectului sursă ..."

#: AppTools/ToolFilm.py:876 AppTools/ToolFilm.py:880
msgid "Export negative film"
msgstr "Export film negativ"

#: AppTools/ToolFilm.py:941 AppTools/ToolFilm.py:1124
#: AppTools/ToolPanelize.py:441
msgid "No object Box. Using instead"
msgstr "Nu exista container. Se foloseşte in schimb"

#: AppTools/ToolFilm.py:1057 AppTools/ToolFilm.py:1237
msgid "Film file exported to"
msgstr "Fișierul Film exportat în"

#: AppTools/ToolFilm.py:1060 AppTools/ToolFilm.py:1240
msgid "Generating Film ... Please wait."
msgstr "Filmul se generează ... Aşteaptă."

#: AppTools/ToolImage.py:24
msgid "Image as Object"
msgstr "Imagine ca Obiect"

#: AppTools/ToolImage.py:33
msgid "Image to PCB"
msgstr "Imagine -> PCB"

#: AppTools/ToolImage.py:56
msgid ""
"Specify the type of object to create from the image.\n"
"It can be of type: Gerber or Geometry."
msgstr ""
"Specifica tipul de obiect care se vrea a fi creat din imagine.\n"
"Tipul sau poate să fie ori Gerber ori Geometrie."

#: AppTools/ToolImage.py:65
msgid "DPI value"
msgstr "Val. DPI"

#: AppTools/ToolImage.py:66
msgid "Specify a DPI value for the image."
msgstr "Specifica o valoare DPI pt imagine."

#: AppTools/ToolImage.py:72
msgid "Level of detail"
msgstr "Nivel Detaliu"

#: AppTools/ToolImage.py:81
msgid "Image type"
msgstr "Tip imagine"

#: AppTools/ToolImage.py:83
msgid ""
"Choose a method for the image interpretation.\n"
"B/W means a black & white image. Color means a colored image."
msgstr ""
"Alege o metoda de interpretare a imaginii.\n"
"B/W = imagine alb-negru\n"
"Color = imagine in culori."

#: AppTools/ToolImage.py:92 AppTools/ToolImage.py:107 AppTools/ToolImage.py:120
#: AppTools/ToolImage.py:133
msgid "Mask value"
msgstr "Val. masca"

#: AppTools/ToolImage.py:94
msgid ""
"Mask for monochrome image.\n"
"Takes values between [0 ... 255].\n"
"Decides the level of details to include\n"
"in the resulting geometry.\n"
"0 means no detail and 255 means everything \n"
"(which is totally black)."
msgstr ""
"Masca pt imaginile monocrome.\n"
"Ia valori in intervalul [0 ... 255]\n"
"Decide nivelul de detalii care să fie\n"
"incluse in obiectul rezultat.\n"
"0 = nici-un detaliu\n"
"255 = include totul (ceeace ce inseamna\n"
"negru complet)."

#: AppTools/ToolImage.py:109
msgid ""
"Mask for RED color.\n"
"Takes values between [0 ... 255].\n"
"Decides the level of details to include\n"
"in the resulting geometry."
msgstr ""
"Masca pt culoarea ROSU.\n"
"Ia valori in intervalul [0 ... 255].\n"
"Decide nivelul de detalii care să fie\n"
"incluse in obiectul rezultat."

#: AppTools/ToolImage.py:122
msgid ""
"Mask for GREEN color.\n"
"Takes values between [0 ... 255].\n"
"Decides the level of details to include\n"
"in the resulting geometry."
msgstr ""
"Masca pt culoarea VERDE.\n"
"Ia valori in intervalul [0 ... 255].\n"
"Decide nivelul de detalii care să fie\n"
"incluse in obiectul rezultat."

#: AppTools/ToolImage.py:135
msgid ""
"Mask for BLUE color.\n"
"Takes values between [0 ... 255].\n"
"Decides the level of details to include\n"
"in the resulting geometry."
msgstr ""
"Masca pt culoarea ALBASTRU.\n"
"Ia valori in intervalul [0 ... 255].\n"
"Decide nivelul de detalii care să fie\n"
"incluse in obiectul rezultat."

#: AppTools/ToolImage.py:143
msgid "Import image"
msgstr "Importa imagine"

#: AppTools/ToolImage.py:145
msgid "Open a image of raster type and then import it in FlatCAM."
msgstr "Deschide o imagine tip raster și importa aceasta in FlatCAM."

#: AppTools/ToolImage.py:182
msgid "Image Tool"
msgstr "Unealta Imagine"

#: AppTools/ToolImage.py:234 AppTools/ToolImage.py:237
msgid "Import IMAGE"
msgstr "Importa Imagine"

#: AppTools/ToolImage.py:277 App_Main.py:8514 App_Main.py:8561
msgid ""
"Not supported type is picked as parameter. Only Geometry and Gerber are "
"supported"
msgstr ""
"Tipul parametrului nu este compatibil. Doar obiectele tip Geometrie si "
"Gerber sunt acceptate"

#: AppTools/ToolImage.py:285
msgid "Importing Image"
msgstr "Imaginea in curs de a fi importata"

#: AppTools/ToolImage.py:297 AppTools/ToolPDF.py:154 App_Main.py:8539
#: App_Main.py:8585 App_Main.py:8649 App_Main.py:8716 App_Main.py:8782
#: App_Main.py:8847 App_Main.py:8904
msgid "Opened"
msgstr "Încarcat"

#: AppTools/ToolInvertGerber.py:74
msgid "Gerber object that will be inverted."
msgstr ""
"Obiect Gerber care va fi inversat\n"
"(din pozitiv in negativ)."

#: AppTools/ToolInvertGerber.py:83
msgid "Parameters for this tool"
msgstr "Parametrii pt această unealtă"

#: AppTools/ToolInvertGerber.py:123
msgid "Invert Gerber"
msgstr "Inversează Gerber"

#: AppTools/ToolInvertGerber.py:125
msgid ""
"Will invert the Gerber object: areas that have copper\n"
"will be empty of copper and previous empty area will be\n"
"filled with copper."
msgstr ""
"Va inversa obiectul Gerber: ariile care contin cupru vor devein goale,\n"
"iar ariile care nu aveau cupru vor fi pline."

#: AppTools/ToolInvertGerber.py:184
msgid "Invert Tool"
msgstr "Unealta Inversie"

#: AppTools/ToolMove.py:102
msgid "MOVE: Click on the Start point ..."
msgstr "MUTARE: Click pe punctul de Start ..."

#: AppTools/ToolMove.py:113
msgid "Cancelled. No object(s) to move."
msgstr "Anulat. Nu sunt obiecte care să fie mutate."

#: AppTools/ToolMove.py:140
msgid "MOVE: Click on the Destination point ..."
msgstr "MUTARE: Click pe punctul Destinaţie..."

#: AppTools/ToolMove.py:163
msgid "Moving..."
msgstr "In mișcare ..."

#: AppTools/ToolMove.py:166
msgid "No object(s) selected."
msgstr "Nici-un obiect nu este selectat."

#: AppTools/ToolMove.py:221
msgid "Error when mouse left click."
msgstr "Eroare atunci când faceți clic pe butonul stânga al mouse-ului."

#: AppTools/ToolNCC.py:42
msgid "Non-Copper Clearing"
msgstr "Curățăre Non-Cu"

#: AppTools/ToolNCC.py:88
msgid ""
"Specify the type of object to be cleared of excess copper.\n"
"It can be of type: Gerber or Geometry.\n"
"What is selected here will dictate the kind\n"
"of objects that will populate the 'Object' combobox."
msgstr ""
"Precizați tipul de obiect care trebuie curățat de excesul de cupru.\n"
"Poate fi de tip: Gerber sau Geometry.\n"
"Ceea ce este selectat aici va dicta genul\n"
"de obiecte care vor popula combobox-ul „Obiect”."

#: AppTools/ToolNCC.py:110
msgid "Object to be cleared of excess copper."
msgstr "Obiect care trebuie curatat de excesul de cupru."

#: AppTools/ToolNCC.py:122
msgid ""
"Tools pool from which the algorithm\n"
"will pick the ones used for copper clearing."
msgstr ""
"Un număr de unelte din care algoritmul va alege\n"
"pe acelea care vor fi folosite pentru curățarea de Cu."

#: AppTools/ToolNCC.py:138
msgid ""
"This is the Tool Number.\n"
"Non copper clearing will start with the tool with the biggest \n"
"diameter, continuing until there are no more tools.\n"
"Only tools that create NCC clearing geometry will still be present\n"
"in the resulting geometry. This is because with some tools\n"
"this function will not be able to create painting geometry."
msgstr ""
"Numărul uneltei.\n"
"Curățarea de cupru va incepe cu unealta cu diametrul cel mai mare\n"
"continuand ulterior cu cele cu dia mai mic pana numai sunt unelte\n"
"sau s-a terminat procesul.\n"
"Doar uneltele care efectiv au creat geometrie vor fi prezente in obiectul\n"
"final. Aceasta deaorece unele unelte nu vor putea genera geometrie."

#: AppTools/ToolNCC.py:146
msgid ""
"Tool Diameter. It's value (in current FlatCAM units)\n"
"is the cut width into the material."
msgstr ""
"Diametrul uneltei. Valoarea să (in unitati curente FlatCAM)\n"
"reprezintă lăţimea tăieturii in material."

#: AppTools/ToolNCC.py:150
msgid ""
"The Tool Type (TT) can be:\n"
"- Circular with 1 ... 4 teeth -> it is informative only. Being circular,\n"
"the cut width in material is exactly the tool diameter.\n"
"- Ball -> informative only and make reference to the Ball type endmill.\n"
"- V-Shape -> it will disable Z-Cut parameter in the resulting geometry UI "
"form\n"
"and enable two additional UI form fields in the resulting geometry: V-Tip "
"Dia and\n"
"V-Tip Angle. Adjusting those two values will adjust the Z-Cut parameter "
"such\n"
"as the cut width into material will be equal with the value in the Tool "
"Diameter\n"
"column of this table.\n"
"Choosing the 'V-Shape' Tool Type automatically will select the Operation "
"Type\n"
"in the resulting geometry as Isolation."
msgstr ""
"Tipul de instrument (TT) poate fi:\n"
"- Circular cu 1 ... 4 dinți -> este doar informativ. Fiind circular,\n"
"lățimea tăiată în material este exact diametrul sculei.\n"
"- Ball -> numai informativ și face referire la freza de tip Ball.\n"
"- V-Shape -> va dezactiva parametrul Z-Cut în GUI\n"
"și v-a activa două câmpuri de GUII suplimentare în geometria rezultată: V-"
"Tip Dia și\n"
"V-Tip Angle. Ajustarea celor două valori va ajusta parametrul Z-Cut astfel\n"
"incat lățimea tăiată în material va fi egală cu valoarea din coloana "
"tabelului cu Diametrul sculei.\n"
"Alegerea tipului de instrument „Forma V” va selecta automat tipul de "
"operare\n"
"în geometria rezultată ca fiind Izolare."

#: AppTools/ToolNCC.py:296 AppTools/ToolPaint.py:278
msgid ""
"Add a new tool to the Tool Table\n"
"with the diameter specified above."
msgstr ""
"Adaugă o noua unelata in Tabela de Unelte,\n"
"cu diametrul specificat mai sus."

#: AppTools/ToolNCC.py:318 AppTools/ToolPaint.py:300
#: AppTools/ToolSolderPaste.py:130
msgid ""
"Delete a selection of tools in the Tool Table\n"
"by first selecting a row(s) in the Tool Table."
msgstr ""
"Șterge o selecţie de unelte in Tabela de Unelte,\n"
"efectuata prin selectia liniilot din Tabela de Unelte."

#: AppTools/ToolNCC.py:554
msgid ""
"The type of FlatCAM object to be used as non copper clearing reference.\n"
"It can be Gerber, Excellon or Geometry."
msgstr ""
"Tipul de obiect FlatCAM care trebuie utilizat ca referință pt. curățarea de "
"non-cupru.\n"
"Poate fi Gerber, Excellon sau Geometry."

#: AppTools/ToolNCC.py:597 AppTools/ToolPaint.py:536
msgid "Generate Geometry"
msgstr "Genereza Geometrie"

#: AppTools/ToolNCC.py:932 AppTools/ToolNCC.py:1431 AppTools/ToolPaint.py:857
#: AppTools/ToolSolderPaste.py:568 AppTools/ToolSolderPaste.py:893
#: App_Main.py:4440
msgid "Please enter a tool diameter with non-zero value, in Float format."
msgstr ""
"Introduceti un diametru al uneltei valid: valoare ne-nula in format Real."

#: AppTools/ToolNCC.py:936 AppTools/ToolPaint.py:861
#: AppTools/ToolSolderPaste.py:572 App_Main.py:4444
msgid "Adding Tool cancelled"
msgstr "Adăugarea unei unelte anulată"

#: AppTools/ToolNCC.py:1425 AppTools/ToolPaint.py:1183
#: AppTools/ToolSolderPaste.py:888
msgid "Please enter a tool diameter to add, in Float format."
msgstr "Introduce diametrul unei unelte pt a fi adăugată, in format Real."

#: AppTools/ToolNCC.py:1456 AppTools/ToolNCC.py:4065 AppTools/ToolPaint.py:1207
#: AppTools/ToolPaint.py:3608 AppTools/ToolSolderPaste.py:917
msgid "Cancelled. Tool already in Tool Table."
msgstr "Anulat. Unealta există deja in Tabela de Unelte."

#: AppTools/ToolNCC.py:1463 AppTools/ToolNCC.py:4082 AppTools/ToolPaint.py:1212
#: AppTools/ToolPaint.py:3625
msgid "New tool added to Tool Table."
msgstr "O noua unealtă a fost adăugată in Tabela de Unelte."

#: AppTools/ToolNCC.py:1507 AppTools/ToolPaint.py:1256
msgid "Tool from Tool Table was edited."
msgstr "O unealtă din Tabela de Unelte a fost editata."

#: AppTools/ToolNCC.py:1519 AppTools/ToolPaint.py:1268
#: AppTools/ToolSolderPaste.py:978
msgid "Cancelled. New diameter value is already in the Tool Table."
msgstr ""
"Anulat. Noua valoare pt diametrul uneltei este deja in Tabela de Unelte."

#: AppTools/ToolNCC.py:1571 AppTools/ToolPaint.py:1366
msgid "Delete failed. Select a tool to delete."
msgstr "Ștergere eșuată. Selectează o unealtă pt ștergere."

#: AppTools/ToolNCC.py:1577 AppTools/ToolPaint.py:1372
msgid "Tool(s) deleted from Tool Table."
msgstr "Au fost șterse unelte din Tabela de Unelte."

#: AppTools/ToolNCC.py:1620
msgid "Wrong Tool Dia value format entered, use a number."
msgstr "Diametrul uneltei este in format gresit, foloseşte un număr Real."

#: AppTools/ToolNCC.py:1629 AppTools/ToolPaint.py:1423
msgid "No selected tools in Tool Table."
msgstr "Nu sunt unelte selectate in Tabela de Unelte."

#: AppTools/ToolNCC.py:1705 AppTools/ToolPaint.py:1599
msgid "Click the end point of the paint area."
msgstr "Faceți clic pe punctul final al zonei de pictat."

#: AppTools/ToolNCC.py:1985 AppTools/ToolNCC.py:3010
msgid "NCC Tool. Preparing non-copper polygons."
msgstr "Unealta NCC. Se pregătesc poligoanele non-cupru."

#: AppTools/ToolNCC.py:2044 AppTools/ToolNCC.py:3138
msgid "NCC Tool. Calculate 'empty' area."
msgstr "Unealta NCC. Calculează aria 'goală'."

#: AppTools/ToolNCC.py:2063 AppTools/ToolNCC.py:2172 AppTools/ToolNCC.py:2187
#: AppTools/ToolNCC.py:3151 AppTools/ToolNCC.py:3256 AppTools/ToolNCC.py:3271
#: AppTools/ToolNCC.py:3537 AppTools/ToolNCC.py:3638 AppTools/ToolNCC.py:3653
msgid "Buffering finished"
msgstr "Buferarea terminată"

#: AppTools/ToolNCC.py:2071 AppTools/ToolNCC.py:2194 AppTools/ToolNCC.py:3159
#: AppTools/ToolNCC.py:3278 AppTools/ToolNCC.py:3544 AppTools/ToolNCC.py:3660
msgid "Could not get the extent of the area to be non copper cleared."
msgstr ""
"Nu s-a putut obtine intinderea suprafaței care să fie curățată de cupru."

#: AppTools/ToolNCC.py:2101 AppTools/ToolNCC.py:2180 AppTools/ToolNCC.py:3186
#: AppTools/ToolNCC.py:3263 AppTools/ToolNCC.py:3564 AppTools/ToolNCC.py:3645
msgid ""
"Isolation geometry is broken. Margin is less than isolation tool diameter."
msgstr ""
"Geometria de Izolare este discontinuă.\n"
"Marginea este mai mic decat diametrul uneltei de izolare."

#: AppTools/ToolNCC.py:2197 AppTools/ToolNCC.py:3282 AppTools/ToolNCC.py:3663
msgid "The selected object is not suitable for copper clearing."
msgstr "Obiectul selectat nu este potrivit pentru curățarea cuprului."

#: AppTools/ToolNCC.py:2204 AppTools/ToolNCC.py:3289
msgid "NCC Tool. Finished calculation of 'empty' area."
msgstr "Unealta NCC. S-a terminat calculul suprafetei 'goale'."

#: AppTools/ToolNCC.py:2247
#, fuzzy
#| msgid "Painting polygon with method: lines."
msgid "Clearing polygon with method: lines."
msgstr "Se pictează poligonul cu metoda: linii."

#: AppTools/ToolNCC.py:2257
#, fuzzy
#| msgid "Failed. Painting polygon with method: seed."
msgid "Failed. Clearing polygon with method: seed."
msgstr "Esuat. Se pictează poligonul cu metoda: sămantă."

#: AppTools/ToolNCC.py:2266
#, fuzzy
#| msgid "Failed. Painting polygon with method: standard."
msgid "Failed. Clearing polygon with method: standard."
msgstr "Esuat. Se picteaza poligonul cu metoda: standard."

#: AppTools/ToolNCC.py:2280
#, fuzzy
#| msgid "Geometry could not be painted completely"
msgid "Geometry could not be cleared completely"
msgstr "Geometria nu a fost posibil să fie 'pictată' complet"

#: AppTools/ToolNCC.py:2305 AppTools/ToolNCC.py:2307 AppTools/ToolNCC.py:2962
#: AppTools/ToolNCC.py:2964
msgid "Non-Copper clearing ..."
msgstr "Curățare Non-Cupru ..."

#: AppTools/ToolNCC.py:2354 AppTools/ToolNCC.py:3106
msgid ""
"NCC Tool. Finished non-copper polygons. Normal copper clearing task started."
msgstr ""
"Unelata NCC. S-a terminat pregătirea poligoanelor non-cupru. Taskul de "
"curatare normal de cupru a inceput."

#: AppTools/ToolNCC.py:2390 AppTools/ToolNCC.py:2638
msgid "NCC Tool failed creating bounding box."
msgstr "Unealta NCC a esuat in a crea forma inconjurătoare."

#: AppTools/ToolNCC.py:2405 AppTools/ToolNCC.py:2655 AppTools/ToolNCC.py:3302
#: AppTools/ToolNCC.py:3688
msgid "NCC Tool clearing with tool diameter"
msgstr "Unealta NCC cu diametrul uneltei"

#: AppTools/ToolNCC.py:2405 AppTools/ToolNCC.py:2655 AppTools/ToolNCC.py:3302
#: AppTools/ToolNCC.py:3688
msgid "started."
msgstr "a inceput."

#: AppTools/ToolNCC.py:2563 AppTools/ToolNCC.py:3463
msgid ""
"There is no NCC Geometry in the file.\n"
"Usually it means that the tool diameter is too big for the painted "
"geometry.\n"
"Change the painting parameters and try again."
msgstr ""
"Nu există nicio Geometrie NCC în fișier.\n"
"De obicei, înseamnă că diametrul uneltei este prea mare pentru geometria "
"pictată.\n"
"Schimbați parametrii Paint și încercați din nou."

#: AppTools/ToolNCC.py:2572 AppTools/ToolNCC.py:3472
msgid "NCC Tool clear all done."
msgstr "Unealta NCC curătare toate efectuată."

#: AppTools/ToolNCC.py:2575 AppTools/ToolNCC.py:3475
msgid "NCC Tool clear all done but the copper features isolation is broken for"
msgstr ""
"Unealta NCC curătare toate efectuată dar izolatia este intreruptă pentru"

#: AppTools/ToolNCC.py:2577 AppTools/ToolNCC.py:2863 AppTools/ToolNCC.py:3477
#: AppTools/ToolNCC.py:3860
msgid "tools"
msgstr "unelte"

#: AppTools/ToolNCC.py:2859 AppTools/ToolNCC.py:3856
msgid "NCC Tool Rest Machining clear all done."
msgstr "Unealta NCC curătare cu prelucrare tip 'rest' efectuată."

#: AppTools/ToolNCC.py:2862 AppTools/ToolNCC.py:3859
msgid ""
"NCC Tool Rest Machining clear all done but the copper features isolation is "
"broken for"
msgstr ""
"Unealta NCC curătare toate cu prelucrare tip 'rest' efectuată dar izolatia "
"este intreruptă pentru"

#: AppTools/ToolNCC.py:2974
msgid "NCC Tool started. Reading parameters."
msgstr "Unealta NCC a pornit. Se citesc parametrii."

#: AppTools/ToolNCC.py:3958
msgid ""
"Try to use the Buffering Type = Full in Preferences -> Gerber General. "
"Reload the Gerber file after this change."
msgstr ""
"Incearcă să folosesti optiunea Tipul de buffering = Complet in Preferinte -> "
"Gerber General. Reincarcă fisierul Gerber după această schimbare."

#: AppTools/ToolNCC.py:4022 AppTools/ToolPaint.py:3565 App_Main.py:5501
msgid "Tool from DB added in Tool Table."
msgstr "Unealtă din Baza de date adăugată in Tabela de Unelte."

#: AppTools/ToolOptimal.py:79
msgid "Number of decimals kept for found distances."
msgstr "Numărul de zecimale păstrate pentru distanțele găsite."

#: AppTools/ToolOptimal.py:87
msgid "Minimum distance"
msgstr "Distanta minima"

#: AppTools/ToolOptimal.py:88
msgid "Display minimum distance between copper features."
msgstr "Afișează distanța minimă între caracteristicile de cupru."

#: AppTools/ToolOptimal.py:92
msgid "Determined"
msgstr "Determinat"

#: AppTools/ToolOptimal.py:106
msgid "Occurring"
msgstr "Aparute"

#: AppTools/ToolOptimal.py:107
msgid "How many times this minimum is found."
msgstr "De câte ori este găsit acest minim."

#: AppTools/ToolOptimal.py:113
msgid "Minimum points coordinates"
msgstr "Coordonatele punctelor minime"

#: AppTools/ToolOptimal.py:114 AppTools/ToolOptimal.py:120
msgid "Coordinates for points where minimum distance was found."
msgstr "Coordonate pentru puncte în care a fost găsită distanța minimă."

#: AppTools/ToolOptimal.py:133 AppTools/ToolOptimal.py:209
msgid "Jump to selected position"
msgstr "Salt la poziția selectată"

#: AppTools/ToolOptimal.py:135 AppTools/ToolOptimal.py:211
msgid ""
"Select a position in the Locations text box and then\n"
"click this button."
msgstr ""
"Selectați o poziție în caseta de text Locații, apoi\n"
"faceți clic pe acest buton."

#: AppTools/ToolOptimal.py:143
msgid "Other distances"
msgstr "Alte distanțe"

#: AppTools/ToolOptimal.py:144
msgid ""
"Will display other distances in the Gerber file ordered from\n"
"the minimum to the maximum, not including the absolute minimum."
msgstr ""
"Va afișa alte distanțe din fișierul Gerber ordonate de la\n"
"minim până la maxim, neincluzând minimul absolut."

#: AppTools/ToolOptimal.py:149
msgid "Other distances points coordinates"
msgstr "Coordonatele altor puncte distanțe"

#: AppTools/ToolOptimal.py:150 AppTools/ToolOptimal.py:164
#: AppTools/ToolOptimal.py:171 AppTools/ToolOptimal.py:188
#: AppTools/ToolOptimal.py:195
msgid ""
"Other distances and the coordinates for points\n"
"where the distance was found."
msgstr ""
"Alte distanțe și coordonatele pentru puncte\n"
"unde a fost găsită distanța."

#: AppTools/ToolOptimal.py:163
msgid "Gerber distances"
msgstr "Distanțele Gerber"

#: AppTools/ToolOptimal.py:187
msgid "Points coordinates"
msgstr "Coordonatele punctelor"

#: AppTools/ToolOptimal.py:219
msgid "Find Minimum"
msgstr "Găsiți Minim"

#: AppTools/ToolOptimal.py:221
msgid ""
"Calculate the minimum distance between copper features,\n"
"this will allow the determination of the right tool to\n"
"use for isolation or copper clearing."
msgstr ""
"Calculați distanța minimă între caracteristicile de cupru,\n"
"acest lucru va permite determinarea uneltei potrivite\n"
"pentru izolare sau curatare de cupru."

#: AppTools/ToolOptimal.py:346
msgid "Only Gerber objects can be evaluated."
msgstr "Doar obiecte tip Gerber pot fi folosite."

#: AppTools/ToolOptimal.py:352
msgid ""
"Optimal Tool. Started to search for the minimum distance between copper "
"features."
msgstr ""
"Unealta Optim. A început să caute distanța minimă între caracteristicile de "
"cupru."

#: AppTools/ToolOptimal.py:362
msgid "Optimal Tool. Parsing geometry for aperture"
msgstr "Unealta Optim. Analiza geometriei pentru apertura"

#: AppTools/ToolOptimal.py:373
msgid "Optimal Tool. Creating a buffer for the object geometry."
msgstr ""
"Unealta Optim. Se creeaza o Geometrie la o distanta de geometria obiectului."

#: AppTools/ToolOptimal.py:383
msgid ""
"The Gerber object has one Polygon as geometry.\n"
"There are no distances between geometry elements to be found."
msgstr ""
"Obiectul Gerber are un poligon ca geometrie.\n"
"Nu există distanțe între elementele de geometrie care sa poata fi gasite."

#: AppTools/ToolOptimal.py:388
msgid ""
"Optimal Tool. Finding the distances between each two elements. Iterations"
msgstr ""
"Unealta Optim. Se caută distanțele dintre fiecare două elemente. Iterații"

#: AppTools/ToolOptimal.py:423
msgid "Optimal Tool. Finding the minimum distance."
msgstr "Unealta Optim. Se caută distanța minimă."

#: AppTools/ToolOptimal.py:439
msgid "Optimal Tool. Finished successfully."
msgstr "Unealta Optim. Procesul s-a terminat cu succes."

#: AppTools/ToolPDF.py:91 AppTools/ToolPDF.py:95
msgid "Open PDF"
msgstr "Încarcă PDF"

#: AppTools/ToolPDF.py:98
msgid "Open PDF cancelled"
msgstr "Deschidere PDF anulată"

#: AppTools/ToolPDF.py:122
msgid "Parsing PDF file ..."
msgstr "Se parsează fisierul PDF ..."

#: AppTools/ToolPDF.py:138 App_Main.py:8747
msgid "Failed to open"
msgstr "A eșuat incărcarea fişierului"

#: AppTools/ToolPDF.py:203 AppTools/ToolPcbWizard.py:445 App_Main.py:8696
msgid "No geometry found in file"
msgstr "Nici-o informaţie de tip geometrie nu s-a gasit in fişierul"

#: AppTools/ToolPDF.py:206 AppTools/ToolPDF.py:279
#, python-format
msgid "Rendering PDF layer #%d ..."
msgstr "Se generează layer-ul PDF #%d ..."

#: AppTools/ToolPDF.py:210 AppTools/ToolPDF.py:283
msgid "Open PDF file failed."
msgstr "Deschiderea fişierului PDF a eşuat."

#: AppTools/ToolPDF.py:215 AppTools/ToolPDF.py:288
msgid "Rendered"
msgstr "Randat"

#: AppTools/ToolPaint.py:81
msgid ""
"Specify the type of object to be painted.\n"
"It can be of type: Gerber or Geometry.\n"
"What is selected here will dictate the kind\n"
"of objects that will populate the 'Object' combobox."
msgstr ""
"Specificați tipul de obiect care urmează să fie pictat.\n"
"Poate fi de tip: Gerber sau Geometry.\n"
"Ceea ce este selectat aici va dicta genul\n"
"de obiecte care vor popula combobox-ul „Obiect”."

#: AppTools/ToolPaint.py:103
msgid "Object to be painted."
msgstr "Obiect care trebuie pictat."

#: AppTools/ToolPaint.py:116
msgid ""
"Tools pool from which the algorithm\n"
"will pick the ones used for painting."
msgstr ""
"O suma de unelte din care algoritmul va alege pe acelea\n"
"care vor fi folosite pentru 'pictare'."

#: AppTools/ToolPaint.py:133
msgid ""
"This is the Tool Number.\n"
"Painting will start with the tool with the biggest diameter,\n"
"continuing until there are no more tools.\n"
"Only tools that create painting geometry will still be present\n"
"in the resulting geometry. This is because with some tools\n"
"this function will not be able to create painting geometry."
msgstr ""
"Numărul uneltei.\n"
"'Pictarea' va incepe cu unealta cu diametrul cel mai mare\n"
"continuand ulterior cu cele cu dia mai mic pana numai sunt unelte\n"
"sau s-a terminat procesul.\n"
"Doar uneltele care efectiv au creat geometrie vor fi prezente in obiectul\n"
"final. Aceasta deaorece unele unelte nu vor putea genera geometrie."

#: AppTools/ToolPaint.py:145
msgid ""
"The Tool Type (TT) can be:\n"
"- Circular -> it is informative only. Being circular,\n"
"the cut width in material is exactly the tool diameter.\n"
"- Ball -> informative only and make reference to the Ball type endmill.\n"
"- V-Shape -> it will disable Z-Cut parameter in the resulting geometry UI "
"form\n"
"and enable two additional UI form fields in the resulting geometry: V-Tip "
"Dia and\n"
"V-Tip Angle. Adjusting those two values will adjust the Z-Cut parameter "
"such\n"
"as the cut width into material will be equal with the value in the Tool "
"Diameter\n"
"column of this table.\n"
"Choosing the 'V-Shape' Tool Type automatically will select the Operation "
"Type\n"
"in the resulting geometry as Isolation."
msgstr ""
"Tipul de instrument (TT) poate fi:\n"
"- Circular -> este doar informativ. Fiind circular,\n"
"lățimea tăiată în material este exact diametrul sculei.\n"
"- Ball -> numai informativ și face referire la freza de tip Ball.\n"
"- V-Shape -> va dezactiva parametrul Z-Cut în GUI\n"
"și v-a activa două câmpuri de GUII suplimentare în geometria rezultată: V-"
"Tip Dia și\n"
"V-Tip Angle. Ajustarea celor două valori va ajusta parametrul Z-Cut astfel\n"
"incat lățimea tăiată în material va fi egală cu valoarea din coloana "
"tabelului cu Diametrul sculei.\n"
"Alegerea tipului de instrument „Forma V” va selecta automat tipul de "
"operare\n"
"în geometria rezultată ca fiind Izolare."

#: AppTools/ToolPaint.py:497
msgid ""
"The type of FlatCAM object to be used as paint reference.\n"
"It can be Gerber, Excellon or Geometry."
msgstr ""
"Tipul de obiect FlatCAM care trebuie utilizat ca referință pt. pictare.\n"
"Poate fi Gerber, Excellon sau Geometry."

#: AppTools/ToolPaint.py:538
msgid ""
"- 'Area Selection' - left mouse click to start selection of the area to be "
"painted.\n"
"Keeping a modifier key pressed (CTRL or SHIFT) will allow to add multiple "
"areas.\n"
"- 'All Polygons' - the Paint will start after click.\n"
"- 'Reference Object' -  will do non copper clearing within the area\n"
"specified by another object."
msgstr ""
"- „Selecție zonă” - faceți clic stânga cu mouse-ul pentru a începe selecția "
"zonei care va fi pictată.\n"
"Menținerea unei taste de modificare apăsată (CTRL sau SHIFT) va permite "
"adăugarea mai multor zone.\n"
"- „Toate Poligoanele” - Pictarea va începe după clic.\n"
"- „Obiect de referință” - va face o curățare fără cupru în zona specificată "
"de un alt obiect."

#: AppTools/ToolPaint.py:1392
#, python-format
msgid "Could not retrieve object: %s"
msgstr "Nu s-a putut incărca obiectul: %s"

#: AppTools/ToolPaint.py:1402
msgid "Can't do Paint on MultiGeo geometries"
msgstr "Nu se poate face 'pictare' pe geometrii MultiGeo"

#: AppTools/ToolPaint.py:1432
msgid "Click on a polygon to paint it."
msgstr "Faceți clic pe un poligon pentru a-l picta."

#: AppTools/ToolPaint.py:1452
msgid "Click the start point of the paint area."
msgstr "Faceți clic pe punctul de pornire al zonei de pictat."

#: AppTools/ToolPaint.py:1517
msgid "Click to add next polygon or right click to start painting."
msgstr ""
"Faceți clic pentru a adăuga următorul poligon sau faceți clic dreapta pentru "
"a începe Paint."

#: AppTools/ToolPaint.py:1530
msgid "Click to add/remove next polygon or right click to start painting."
msgstr ""
"Faceți clic pentru a adăuga / elimina următorul poligon sau faceți clic "
"dreapta pentru a începe Paint."

#: AppTools/ToolPaint.py:2034
msgid "Painting polygon with method: lines."
msgstr "Se pictează poligonul cu metoda: linii."

#: AppTools/ToolPaint.py:2046
msgid "Failed. Painting polygon with method: seed."
msgstr "Esuat. Se pictează poligonul cu metoda: sămantă."

#: AppTools/ToolPaint.py:2057
msgid "Failed. Painting polygon with method: standard."
msgstr "Esuat. Se picteaza poligonul cu metoda: standard."

#: AppTools/ToolPaint.py:2073
msgid "Geometry could not be painted completely"
msgstr "Geometria nu a fost posibil să fie 'pictată' complet"

#: AppTools/ToolPaint.py:2102 AppTools/ToolPaint.py:2105
#: AppTools/ToolPaint.py:2113 AppTools/ToolPaint.py:2416
#: AppTools/ToolPaint.py:2419 AppTools/ToolPaint.py:2427
#: AppTools/ToolPaint.py:2915 AppTools/ToolPaint.py:2918
#: AppTools/ToolPaint.py:2924
msgid "Paint Tool."
msgstr "Unealta Paint."

#: AppTools/ToolPaint.py:2102 AppTools/ToolPaint.py:2105
#: AppTools/ToolPaint.py:2113
msgid "Normal painting polygon task started."
msgstr "Taskul de pictare normal a unui polygon a inceput."

#: AppTools/ToolPaint.py:2103 AppTools/ToolPaint.py:2417
#: AppTools/ToolPaint.py:2916
msgid "Buffering geometry..."
msgstr "Crează o geometrie de tipul Bufer..."

#: AppTools/ToolPaint.py:2125 AppTools/ToolPaint.py:2434
#: AppTools/ToolPaint.py:2932
msgid "No polygon found."
msgstr "Nu s-a gasit nici-un poligon."

#: AppTools/ToolPaint.py:2155
msgid "Painting polygon..."
msgstr "Se 'pictează' un poligon..."

#: AppTools/ToolPaint.py:2165 AppTools/ToolPaint.py:2480
#: AppTools/ToolPaint.py:2670 AppTools/ToolPaint.py:2978
#: AppTools/ToolPaint.py:3157
msgid "Painting with tool diameter = "
msgstr "Pictand cu o unealtă cu diametrul = "

#: AppTools/ToolPaint.py:2166 AppTools/ToolPaint.py:2481
#: AppTools/ToolPaint.py:2671 AppTools/ToolPaint.py:2979
#: AppTools/ToolPaint.py:3158
msgid "started"
msgstr "a inceput"

#: AppTools/ToolPaint.py:2191 AppTools/ToolPaint.py:2507
#: AppTools/ToolPaint.py:2697 AppTools/ToolPaint.py:3005
#: AppTools/ToolPaint.py:3184
msgid "Margin parameter too big. Tool is not used"
msgstr "Parametrul Margine este prea mare. Unealta nu este folosită"

#: AppTools/ToolPaint.py:2249 AppTools/ToolPaint.py:2576
#: AppTools/ToolPaint.py:2754 AppTools/ToolPaint.py:3068
#: AppTools/ToolPaint.py:3246
msgid ""
"Could not do Paint. Try a different combination of parameters. Or a "
"different strategy of paint"
msgstr ""
"Nu s-a putut face operatia de 'pictare'. Incearcă o combinaţie diferita de "
"parametri. Sau o strategie diferita de 'pictare'"

#: AppTools/ToolPaint.py:2306 AppTools/ToolPaint.py:2642
#: AppTools/ToolPaint.py:2811 AppTools/ToolPaint.py:3129
#: AppTools/ToolPaint.py:3308
msgid ""
"There is no Painting Geometry in the file.\n"
"Usually it means that the tool diameter is too big for the painted "
"geometry.\n"
"Change the painting parameters and try again."
msgstr ""
"Nu exista nici-o Geometrie rezultata din 'pictare' in acest fişier.\n"
"De obicei inseamna că diametrul uneltei este prea mare pentru elemetele "
"geometrice.\n"
"Schimbă parametrii de 'pictare' și încearcă din nou."

#: AppTools/ToolPaint.py:2329
msgid "Paint Single failed."
msgstr "Pictarea unui polygon a esuat."

#: AppTools/ToolPaint.py:2335
msgid "Paint Single Done."
msgstr "Pictarea unui polygon efectuată."

#: AppTools/ToolPaint.py:2337 AppTools/ToolPaint.py:2847
#: AppTools/ToolPaint.py:3344
msgid "Polygon Paint started ..."
msgstr "Paint pt poligon a inceput ..."

#: AppTools/ToolPaint.py:2416 AppTools/ToolPaint.py:2419
#: AppTools/ToolPaint.py:2427
msgid "Paint all polygons task started."
msgstr "Taskul de pictare pt toate poligoanele a inceput."

#: AppTools/ToolPaint.py:2458 AppTools/ToolPaint.py:2956
msgid "Painting polygons..."
msgstr "Se 'pictează' poligoane..."

#: AppTools/ToolPaint.py:2651
msgid "Paint All Done."
msgstr "Pictarea Tuturor poligoanelor efectuată."

#: AppTools/ToolPaint.py:2820 AppTools/ToolPaint.py:3317
msgid "Paint All with Rest-Machining done."
msgstr "'Paint' pentru toate poligoanele cu strategia Rest a fost efectuată."

#: AppTools/ToolPaint.py:2839
msgid "Paint All failed."
msgstr "Pictarea pt toate poligoanele a easuat."

#: AppTools/ToolPaint.py:2845
msgid "Paint Poly All Done."
msgstr "Pictarea pt toate poligoanele efectuată."

#: AppTools/ToolPaint.py:2915 AppTools/ToolPaint.py:2918
#: AppTools/ToolPaint.py:2924
msgid "Painting area task started."
msgstr "Taskul de pictare a unei arii a inceput."

#: AppTools/ToolPaint.py:3138
msgid "Paint Area Done."
msgstr "Paint pt o zona efectuata."

#: AppTools/ToolPaint.py:3336
msgid "Paint Area failed."
msgstr "Pictarea unei Zone a esuat."

#: AppTools/ToolPaint.py:3342
msgid "Paint Poly Area Done."
msgstr "Paint pt o Zonă efectuat."

#: AppTools/ToolPanelize.py:35
msgid "Panelize PCB"
msgstr "Panelizează PCB"

#: AppTools/ToolPanelize.py:55
msgid ""
"Specify the type of object to be panelized\n"
"It can be of type: Gerber, Excellon or Geometry.\n"
"The selection here decide the type of objects that will be\n"
"in the Object combobox."
msgstr ""
"Specifica tipul de obiect care va fi panelizat.\n"
"Poate fi de tipul: Gerber, Excellon sau Geometrie.\n"
"Selectia facuta aici va dicta tipul de obiecte care se vor\n"
"regasi in combobox-ul >Obiect<."

#: AppTools/ToolPanelize.py:88
msgid ""
"Object to be panelized. This means that it will\n"
"be duplicated in an array of rows and columns."
msgstr ""
"Obiectul care va fi panelizat.\n"
"Acesta va fi multiplicat intr-o arie\n"
"de linii și coloane."

#: AppTools/ToolPanelize.py:100
msgid "Penelization Reference"
msgstr "Referintă panelizare"

#: AppTools/ToolPanelize.py:102
msgid ""
"Choose the reference for panelization:\n"
"- Object = the bounding box of a different object\n"
"- Bounding Box = the bounding box of the object to be panelized\n"
"\n"
"The reference is useful when doing panelization for more than one\n"
"object. The spacings (really offsets) will be applied in reference\n"
"to this reference object therefore maintaining the panelized\n"
"objects in sync."
msgstr ""
"Alege referinta pt panelizare:\n"
"- Obiect = forma inconjurătoare a unui alt obiect\n"
"- Forma inconjurătoare = forma inconjurătoare a obiectului care tb "
"panelizat\n"
"\n"
"Referinta este utila cand se face panelizarea pt mai mult de un obiect. "
"Spatierile\n"
"(mai degraba ofsetări) vor fi aplicate avand ca referintă acest obiect de "
"referintă,\n"
"prin urmare mentinand obiectele paenlizate in sincronizare unul cu altul."

#: AppTools/ToolPanelize.py:123
msgid "Box Type"
msgstr "Tip container"

#: AppTools/ToolPanelize.py:125
msgid ""
"Specify the type of object to be used as an container for\n"
"panelization. It can be: Gerber or Geometry type.\n"
"The selection here decide the type of objects that will be\n"
"in the Box Object combobox."
msgstr ""
"Tipul de obiect care va fi folosit ca și container pt panelizare.\n"
"Poate fi de tiul: Gerber sau Geometrie.\n"
"Selectia facuta aici va dicta tipul de obiecte care se vor\n"
"regasi in combobox-ul >Container<."

#: AppTools/ToolPanelize.py:139
msgid ""
"The actual object that is used as container for the\n"
" selected object that is to be panelized."
msgstr ""
"Obiectul care este folosit ca și container \n"
"pt obiectul care va fi panelizat."

#: AppTools/ToolPanelize.py:149
msgid "Panel Data"
msgstr "Date panel"

#: AppTools/ToolPanelize.py:151
msgid ""
"This informations will shape the resulting panel.\n"
"The number of rows and columns will set how many\n"
"duplicates of the original geometry will be generated.\n"
"\n"
"The spacings will set the distance between any two\n"
"elements of the panel array."
msgstr ""
"Aceste informatii vor determina forma panelului rezultant.\n"
"Numărul de linii si de coloane va determina cat de multe \n"
"copii ale geometriei obiectului original vor fi create.\n"
"\n"
"Spatierile sunt de fapt distante intre oricare două elemente ale \n"
"ariei panelului."

#: AppTools/ToolPanelize.py:214
msgid ""
"Choose the type of object for the panel object:\n"
"- Geometry\n"
"- Gerber"
msgstr ""
"Alege tipul de obiect care va fi creat pt obiectul panelizat:\n"
"- Geometrie\n"
"-Gerber"

#: AppTools/ToolPanelize.py:222
msgid "Constrain panel within"
msgstr "Mentine panelul in"

#: AppTools/ToolPanelize.py:263
msgid "Panelize Object"
msgstr "Panelizează obiectul"

#: AppTools/ToolPanelize.py:265 AppTools/ToolRulesCheck.py:501
msgid ""
"Panelize the specified object around the specified box.\n"
"In other words it creates multiple copies of the source object,\n"
"arranged in a 2D array of rows and columns."
msgstr ""
"Se panelizează obiectul conform containerului selectat.\n"
"Cu alte cuvinte se crează copii multiple ale obiectului sursa,\n"
"aranjate intr-o arie 2D de linii și coloane."

#: AppTools/ToolPanelize.py:333
msgid "Panel. Tool"
msgstr "Unealta Panel"

#: AppTools/ToolPanelize.py:468
msgid "Columns or Rows are zero value. Change them to a positive integer."
msgstr ""
"Val. coloane sau linii este zero. Schimbă aceasta val. intr-un număr pozitiv "
"intreg."

#: AppTools/ToolPanelize.py:505
msgid "Generating panel ... "
msgstr "Se generează Panel-ul… "

#: AppTools/ToolPanelize.py:788
msgid "Generating panel ... Adding the Gerber code."
msgstr "Generarea panelului ... Adăugarea codului Gerber."

#: AppTools/ToolPanelize.py:796
msgid "Generating panel... Spawning copies"
msgstr "Generarea panelului ... Se fac copii"

#: AppTools/ToolPanelize.py:803
msgid "Panel done..."
msgstr "Panel executat ..."

#: AppTools/ToolPanelize.py:806
#, python-brace-format
msgid ""
"{text} Too big for the constrain area. Final panel has {col} columns and "
"{row} rows"
msgstr ""
"{text} Prea mare pt aria desemnată. Panelul final are {col} coloane si {row} "
"linii"

#: AppTools/ToolPanelize.py:815
msgid "Panel created successfully."
msgstr "Panel creat cu succes."

#: AppTools/ToolPcbWizard.py:31
msgid "PcbWizard Import Tool"
msgstr "Unealta import PcbWizard"

#: AppTools/ToolPcbWizard.py:40
msgid "Import 2-file Excellon"
msgstr "Importa un Excellon bi-fisier"

#: AppTools/ToolPcbWizard.py:51
msgid "Load files"
msgstr "Încărcați fișierele"

#: AppTools/ToolPcbWizard.py:57
msgid "Excellon file"
msgstr "Fisier Excellon"

#: AppTools/ToolPcbWizard.py:59
msgid ""
"Load the Excellon file.\n"
"Usually it has a .DRL extension"
msgstr ""
"Incarcă fisierul Excellon.\n"
"De obicei are extensia .DRL"

#: AppTools/ToolPcbWizard.py:65
msgid "INF file"
msgstr "Fisierul INF"

#: AppTools/ToolPcbWizard.py:67
msgid "Load the INF file."
msgstr "Incarca fisierul INF."

#: AppTools/ToolPcbWizard.py:79
msgid "Tool Number"
msgstr "Număr unealtă"

#: AppTools/ToolPcbWizard.py:81
msgid "Tool diameter in file units."
msgstr "Dimaetrul uneltei in unitătile fisierului."

#: AppTools/ToolPcbWizard.py:87
msgid "Excellon format"
msgstr "Format Excellon"

#: AppTools/ToolPcbWizard.py:95
msgid "Int. digits"
msgstr "Partea intreagă"

#: AppTools/ToolPcbWizard.py:97
msgid "The number of digits for the integral part of the coordinates."
msgstr ""
"Acest număr reprezinta numărul de digiti din partea\n"
"intreagă a coordonatelor."

#: AppTools/ToolPcbWizard.py:104
msgid "Frac. digits"
msgstr "Partea zecimală"

#: AppTools/ToolPcbWizard.py:106
msgid "The number of digits for the fractional part of the coordinates."
msgstr ""
"Acest număr reprezinta numărul de digiti din partea\n"
"zecimala a coordonatelor."

#: AppTools/ToolPcbWizard.py:113
msgid "No Suppression"
msgstr "Fără supresie"

#: AppTools/ToolPcbWizard.py:114
msgid "Zeros supp."
msgstr "Supresie Zero"

#: AppTools/ToolPcbWizard.py:116
msgid ""
"The type of zeros suppression used.\n"
"Can be of type:\n"
"- LZ = leading zeros are kept\n"
"- TZ = trailing zeros are kept\n"
"- No Suppression = no zero suppression"
msgstr ""
"Tipul de supresie de zerouri care\n"
"este folosit.\n"
"Poate fi:\n"
"- LZ = zerourile din fată sunt păstrate\n"
"- TZ = zerourile de la coadă sunt păstrate\n"
"- Fără Supresie = nu se face supresie de zerouri"

#: AppTools/ToolPcbWizard.py:129
msgid ""
"The type of units that the coordinates and tool\n"
"diameters are using. Can be INCH or MM."
msgstr ""
"Tipul de unităti folosite pt coordonate si\n"
"pentru diametrul uneltelor. Poate fi INCH sau MM."

#: AppTools/ToolPcbWizard.py:136
msgid "Import Excellon"
msgstr "Importă Excellon"

#: AppTools/ToolPcbWizard.py:138
msgid ""
"Import in FlatCAM an Excellon file\n"
"that store it's information's in 2 files.\n"
"One usually has .DRL extension while\n"
"the other has .INF extension."
msgstr ""
"Importă in FlatCAM un fisier Excellon\n"
"care isi stochează informatia in 2 fisiere.\n"
"Unul are de obicei extensia .DRL in timp\n"
"ce celălalt are extensia .INF."

#: AppTools/ToolPcbWizard.py:197
msgid "PCBWizard Tool"
msgstr "Unealta PCBWizard"

#: AppTools/ToolPcbWizard.py:291 AppTools/ToolPcbWizard.py:295
msgid "Load PcbWizard Excellon file"
msgstr "Incarcă un fisier Excellon tip PCBWizard"

#: AppTools/ToolPcbWizard.py:314 AppTools/ToolPcbWizard.py:318
msgid "Load PcbWizard INF file"
msgstr "Incarcă un fisier INF tip PCBWizard"

#: AppTools/ToolPcbWizard.py:366
msgid ""
"The INF file does not contain the tool table.\n"
"Try to open the Excellon file from File -> Open -> Excellon\n"
"and edit the drill diameters manually."
msgstr ""
"Fisierul INF nu contine tabela de unelte.\n"
"Incearcă să deschizi fisierul Excellon din Fisier -> Deschide -> \n"
"Excellon si să editezi manual diametrele uneltelor."

#: AppTools/ToolPcbWizard.py:387
msgid "PcbWizard .INF file loaded."
msgstr "Fisierul .INF tip PCBWizard a fost incărcat."

#: AppTools/ToolPcbWizard.py:392
msgid "Main PcbWizard Excellon file loaded."
msgstr "Fişierul Excellon tip PCBWizard a fost incărcat."

#: AppTools/ToolPcbWizard.py:424 App_Main.py:8674
msgid "This is not Excellon file."
msgstr "Acesta nu este un fişier Excellon."

#: AppTools/ToolPcbWizard.py:427
msgid "Cannot parse file"
msgstr "Nu se poate parsa fişierul"

#: AppTools/ToolPcbWizard.py:450
msgid "Importing Excellon."
msgstr "Excellon in curs de import."

#: AppTools/ToolPcbWizard.py:457
msgid "Import Excellon file failed."
msgstr "Fişierul Excellon nu a fost posibil să fie importat."

#: AppTools/ToolPcbWizard.py:464
msgid "Imported"
msgstr "Importat"

#: AppTools/ToolPcbWizard.py:467
msgid "Excellon merging is in progress. Please wait..."
msgstr "Fuziunea fisiere Excellon este in curs. Vă rugăm aşteptați ..."

#: AppTools/ToolPcbWizard.py:469
msgid "The imported Excellon file is empty."
msgstr "Fişierul Excellon importat este gol."

#: AppTools/ToolProperties.py:116 App_Main.py:4914 App_Main.py:6968
#: App_Main.py:7063 App_Main.py:7104 App_Main.py:7145 App_Main.py:7186
#: App_Main.py:7227 App_Main.py:7271 App_Main.py:7315 App_Main.py:7835
#: App_Main.py:7839
msgid "No object selected."
msgstr "Nici-un obiect nu este selectat."

#: AppTools/ToolProperties.py:131
msgid "Object Properties are displayed."
msgstr "Proprietatile obiectului sunt afisate in Tab-ul Unealta."

#: AppTools/ToolProperties.py:136
msgid "Properties Tool"
msgstr "Unealta Proprietati"

#: AppTools/ToolProperties.py:150
msgid "TYPE"
msgstr "TIP"

#: AppTools/ToolProperties.py:151
msgid "NAME"
msgstr "NUME"

#: AppTools/ToolProperties.py:153
msgid "Dimensions"
msgstr "Dimensiuni"

#: AppTools/ToolProperties.py:181
msgid "Geo Type"
msgstr "Tip Geo"

#: AppTools/ToolProperties.py:184
msgid "Single-Geo"
msgstr "Geo-Unică"

#: AppTools/ToolProperties.py:185
msgid "Multi-Geo"
msgstr "Geo-Multi"

#: AppTools/ToolProperties.py:196
msgid "Calculating dimensions ... Please wait."
msgstr "Se calculează dimensiunile ... Aşteaptă."

#: AppTools/ToolProperties.py:339 AppTools/ToolProperties.py:343
#: AppTools/ToolProperties.py:345
msgid "Inch"
msgstr "Inch"

#: AppTools/ToolProperties.py:339 AppTools/ToolProperties.py:344
#: AppTools/ToolProperties.py:346
msgid "Metric"
msgstr "Metric"

#: AppTools/ToolProperties.py:421 AppTools/ToolProperties.py:486
msgid "Drills number"
msgstr "Numărul de găuri"

#: AppTools/ToolProperties.py:422 AppTools/ToolProperties.py:488
msgid "Slots number"
msgstr "Numărul de sloturi"

#: AppTools/ToolProperties.py:424
msgid "Drills total number:"
msgstr "Număr total de gauri:"

#: AppTools/ToolProperties.py:425
msgid "Slots total number:"
msgstr "Număr total de sloturi:"

#: AppTools/ToolProperties.py:452 AppTools/ToolProperties.py:455
#: AppTools/ToolProperties.py:458 AppTools/ToolProperties.py:483
msgid "Present"
msgstr "Prezent"

#: AppTools/ToolProperties.py:453 AppTools/ToolProperties.py:484
msgid "Solid Geometry"
msgstr "Geometrie Solidă"

#: AppTools/ToolProperties.py:456
msgid "GCode Text"
msgstr "Text GCode"

#: AppTools/ToolProperties.py:459
msgid "GCode Geometry"
msgstr "Geometrie GCode"

#: AppTools/ToolProperties.py:462
msgid "Data"
msgstr "Date"

#: AppTools/ToolProperties.py:495
msgid "Depth of Cut"
msgstr "Adâncimea de Tăiere"

#: AppTools/ToolProperties.py:507
msgid "Clearance Height"
msgstr "Înălțime Sigură"

#: AppTools/ToolProperties.py:539
msgid "Routing time"
msgstr "Timpul de rutare"

#: AppTools/ToolProperties.py:546
msgid "Travelled distance"
msgstr "Distanța parcursă"

#: AppTools/ToolProperties.py:564
msgid "Width"
msgstr "Lătime"

#: AppTools/ToolProperties.py:570 AppTools/ToolProperties.py:578
msgid "Box Area"
msgstr "Arie pătratică"

#: AppTools/ToolProperties.py:573 AppTools/ToolProperties.py:581
msgid "Convex_Hull Area"
msgstr "Arie convexă"

#: AppTools/ToolProperties.py:588 AppTools/ToolProperties.py:591
msgid "Copper Area"
msgstr "Aria de Cupru"

#: AppTools/ToolPunchGerber.py:30 AppTools/ToolPunchGerber.py:323
msgid "Punch Gerber"
msgstr "Punctează Gerber"

#: AppTools/ToolPunchGerber.py:65
msgid "Gerber into which to punch holes"
msgstr "Obiect Gerber pentru Punctare găuri"

#: AppTools/ToolPunchGerber.py:85
msgid "ALL"
msgstr "TOATE"

#: AppTools/ToolPunchGerber.py:166
msgid ""
"Remove the geometry of Excellon from the Gerber to create the holes in pads."
msgstr ""
"Îndepărtați geometria Excellon din obiectul Gerber pentru a crea găurile din "
"pad-uri."

#: AppTools/ToolPunchGerber.py:325
msgid ""
"Create a Gerber object from the selected object, within\n"
"the specified box."
msgstr ""
"Creează un obiect Gerber din obiectul selectat, in cadrul\n"
"formei 'cutie' specificate."

#: AppTools/ToolPunchGerber.py:425
msgid "Punch Tool"
msgstr "Unealta Punctare"

#: AppTools/ToolPunchGerber.py:599
msgid "The value of the fixed diameter is 0.0. Aborting."
msgstr "Valoarea pentru diametrul fix ste 0.0. Renuntăm."

#: AppTools/ToolPunchGerber.py:607 AppTools/ToolPunchGerber.py:619
msgid ""
"Could not generate punched hole Gerber because the punch hole size is bigger "
"than some of the apertures in the Gerber object."
msgstr ""
"Nu s-a putut genera un obiect Gerber cu găuri punctate, deoarece dimensiunea "
"găurii de perforare este mai mare decât unele dintre aperturile din obiectul "
"Gerber."

#: AppTools/ToolPunchGerber.py:656
msgid ""
"Could not generate punched hole Gerber because the newly created object "
"geometry is the same as the one in the source object geometry..."
msgstr ""
"Nu s-a putut genera un obiect cu găuri puctate, deoarece geometria "
"obiectului nou creat este aceeași cu cea din geometria obiectului sursă ..."

#: AppTools/ToolQRCode.py:80
msgid "Gerber Object to which the QRCode will be added."
msgstr "Obiect Gerber la care se va adăuga codul QR."

#: AppTools/ToolQRCode.py:93
msgid "QRCode Parameters"
msgstr "Parametrii QRCode"

#: AppTools/ToolQRCode.py:95
msgid "The parameters used to shape the QRCode."
msgstr "Parametrii utilizați pentru modelarea codului QR."

#: AppTools/ToolQRCode.py:207
msgid "Export QRCode"
msgstr "Exportă Codul QR"

#: AppTools/ToolQRCode.py:209
msgid ""
"Show a set of controls allowing to export the QRCode\n"
"to a SVG file or an PNG file."
msgstr ""
"Afișați un set de controale care permit exportul codului QR\n"
"într-un fișier SVG sau într-un fișier PNG."

#: AppTools/ToolQRCode.py:248
msgid "Transparent back color"
msgstr "Culoare de fundal transparentă"

#: AppTools/ToolQRCode.py:273
msgid "Export QRCode SVG"
msgstr "Exporta QRCode SVG"

#: AppTools/ToolQRCode.py:275
msgid "Export a SVG file with the QRCode content."
msgstr "Exportați un fișier SVG cu conținutul QRCode."

#: AppTools/ToolQRCode.py:286
msgid "Export QRCode PNG"
msgstr "Exportă QRCode PNG"

#: AppTools/ToolQRCode.py:288
msgid "Export a PNG image file with the QRCode content."
msgstr "Exportați un fișier imagine PNG cu conținutul QRCode."

#: AppTools/ToolQRCode.py:299
msgid "Insert QRCode"
msgstr "Inserați codul QR"

#: AppTools/ToolQRCode.py:301
msgid "Create the QRCode object."
msgstr "Creați obiectul QRCode."

#: AppTools/ToolQRCode.py:415 AppTools/ToolQRCode.py:750
#: AppTools/ToolQRCode.py:799
msgid "Cancelled. There is no QRCode Data in the text box."
msgstr "Anulat. Nu există date QRCode în caseta de text."

#: AppTools/ToolQRCode.py:434
msgid "Generating QRCode geometry"
msgstr "Generarea geometriei QRCode"

#: AppTools/ToolQRCode.py:474
msgid "Click on the Destination point ..."
msgstr "Click pe punctul de Destinaţie ..."

#: AppTools/ToolQRCode.py:589
msgid "QRCode Tool done."
msgstr "Unealta QRCode efectuata."

#: AppTools/ToolQRCode.py:782 AppTools/ToolQRCode.py:786
msgid "Export PNG"
msgstr "Exporta PNG"

#: AppTools/ToolQRCode.py:829 AppTools/ToolQRCode.py:833 App_Main.py:6996
#: App_Main.py:7000
msgid "Export SVG"
msgstr "Exporta SVG"

#: AppTools/ToolRulesCheck.py:33
msgid "Check Rules"
msgstr "Verificați regulile"

#: AppTools/ToolRulesCheck.py:61
msgid "Gerber Files"
msgstr "Fișiere Gerber"

#: AppTools/ToolRulesCheck.py:63
msgid "Gerber objects for which to check rules."
msgstr "Obiecte Gerber pentru care trebuie verificate regulile."

#: AppTools/ToolRulesCheck.py:78
msgid "Top"
msgstr "Top"

#: AppTools/ToolRulesCheck.py:80
msgid "The Top Gerber Copper object for which rules are checked."
msgstr "Obiectul Top Gerber cupru pentru care sunt verificate regulile."

#: AppTools/ToolRulesCheck.py:96
msgid "Bottom"
msgstr "Bottom"

#: AppTools/ToolRulesCheck.py:98
msgid "The Bottom Gerber Copper object for which rules are checked."
msgstr "Obiectul Bottom Gerber cupru pentru care sunt verificate regulile."

#: AppTools/ToolRulesCheck.py:114
msgid "SM Top"
msgstr "SM Top"

#: AppTools/ToolRulesCheck.py:116
msgid "The Top Gerber Solder Mask object for which rules are checked."
msgstr ""
"Obiectul Top (superior) Gerber Solder Mask pentru care sunt verificate "
"regulile."

#: AppTools/ToolRulesCheck.py:132
msgid "SM Bottom"
msgstr "SM Bottom"

#: AppTools/ToolRulesCheck.py:134
msgid "The Bottom Gerber Solder Mask object for which rules are checked."
msgstr ""
"Obiectul Bottom (inferior) Gerber Solder Mask pentru care sunt verificate "
"regulile."

#: AppTools/ToolRulesCheck.py:150
msgid "Silk Top"
msgstr "Silk Top"

#: AppTools/ToolRulesCheck.py:152
msgid "The Top Gerber Silkscreen object for which rules are checked."
msgstr "Obiectul Top Gerber Silkscreen pentru care sunt verificate regulile."

#: AppTools/ToolRulesCheck.py:168
msgid "Silk Bottom"
msgstr "Silk Bottom"

#: AppTools/ToolRulesCheck.py:170
msgid "The Bottom Gerber Silkscreen object for which rules are checked."
msgstr ""
"Obiectul Bottom Gerber Silkscreen pentru care sunt verificate regulile."

#: AppTools/ToolRulesCheck.py:188
msgid "The Gerber Outline (Cutout) object for which rules are checked."
msgstr ""
"Obiectul Gerber Outline (decupaj) pentru care sunt verificate regulile."

#: AppTools/ToolRulesCheck.py:199
msgid "Excellon Objects"
msgstr "Obiecte Excellon"

#: AppTools/ToolRulesCheck.py:201
msgid "Excellon objects for which to check rules."
msgstr "Obiecte Excellon pentru care trebuie verificate regulile."

#: AppTools/ToolRulesCheck.py:213
msgid "Excellon 1"
msgstr "Excellon 1"

#: AppTools/ToolRulesCheck.py:215
msgid ""
"Excellon object for which to check rules.\n"
"Holds the plated holes or a general Excellon file content."
msgstr ""
"Obiect Excellon pentru care trebuie verificate regulile.\n"
"Contine găurile placate sau un conținut general Excellon."

#: AppTools/ToolRulesCheck.py:232
msgid "Excellon 2"
msgstr "Excellon 2"

#: AppTools/ToolRulesCheck.py:234
msgid ""
"Excellon object for which to check rules.\n"
"Holds the non-plated holes."
msgstr ""
"Obiect Excellon pentru care trebuie verificate regulile.\n"
"Contine găurile ne-placate."

#: AppTools/ToolRulesCheck.py:247
msgid "All Rules"
msgstr "Totate Regulile"

#: AppTools/ToolRulesCheck.py:249
msgid "This check/uncheck all the rules below."
msgstr "Aceasta bifează/debifează toate regulile de mai jos."

#: AppTools/ToolRulesCheck.py:499
msgid "Run Rules Check"
msgstr "Executați Verificarea regulilor"

#: AppTools/ToolRulesCheck.py:1158 AppTools/ToolRulesCheck.py:1218
#: AppTools/ToolRulesCheck.py:1255 AppTools/ToolRulesCheck.py:1327
#: AppTools/ToolRulesCheck.py:1381 AppTools/ToolRulesCheck.py:1419
#: AppTools/ToolRulesCheck.py:1484
msgid "Value is not valid."
msgstr "Valoarea nu este valabilă."

#: AppTools/ToolRulesCheck.py:1172
msgid "TOP -> Copper to Copper clearance"
msgstr "TOP -> Distanta de la Cupru la Cupru"

#: AppTools/ToolRulesCheck.py:1183
msgid "BOTTOM -> Copper to Copper clearance"
msgstr "BOTTOM -> Distanta de la Cupru la Cupru"

#: AppTools/ToolRulesCheck.py:1188 AppTools/ToolRulesCheck.py:1282
#: AppTools/ToolRulesCheck.py:1446
msgid ""
"At least one Gerber object has to be selected for this rule but none is "
"selected."
msgstr ""
"Pentru această regulă trebuie selectat cel puțin un obiect Gerber, dar "
"niciunul nu este selectat."

#: AppTools/ToolRulesCheck.py:1224
msgid ""
"One of the copper Gerber objects or the Outline Gerber object is not valid."
msgstr ""
"Unul dintre obiectele Gerber din cupru sau obiectul Gerber contur nu este "
"valid."

#: AppTools/ToolRulesCheck.py:1237 AppTools/ToolRulesCheck.py:1401
msgid ""
"Outline Gerber object presence is mandatory for this rule but it is not "
"selected."
msgstr ""
"Prezenta obiectului Gerber contur este obligatorie pentru această regulă, "
"dar nu este selectată."

#: AppTools/ToolRulesCheck.py:1254 AppTools/ToolRulesCheck.py:1281
msgid "Silk to Silk clearance"
msgstr "Distanta Silk la Silk"

#: AppTools/ToolRulesCheck.py:1267
msgid "TOP -> Silk to Silk clearance"
msgstr "TOP -> Distanta Silk la Silk"

#: AppTools/ToolRulesCheck.py:1277
msgid "BOTTOM -> Silk to Silk clearance"
msgstr "BOTTOM -> Distanta Silk la Silk"

#: AppTools/ToolRulesCheck.py:1333
msgid "One or more of the Gerber objects is not valid."
msgstr "Unul sau mai multe dintre obiectele Gerber nu sunt valabile."

#: AppTools/ToolRulesCheck.py:1341
msgid "TOP -> Silk to Solder Mask Clearance"
msgstr "TOP -> Distanta Silk la Solder mask"

#: AppTools/ToolRulesCheck.py:1347
msgid "BOTTOM -> Silk to Solder Mask Clearance"
msgstr "BOTTOM -> Distanta Silk la Solder mask"

#: AppTools/ToolRulesCheck.py:1351
msgid ""
"Both Silk and Solder Mask Gerber objects has to be either both Top or both "
"Bottom."
msgstr ""
"Atât obiectele Silk cat si cele Solder Mask trebuie ori ambele TOP ori "
"ambele BOTTOM."

#: AppTools/ToolRulesCheck.py:1387
msgid ""
"One of the Silk Gerber objects or the Outline Gerber object is not valid."
msgstr ""
"Unul dintre obiectele Silk Gerber sau obiectul Contur Gerber nu este valid."

#: AppTools/ToolRulesCheck.py:1431
msgid "TOP -> Minimum Solder Mask Sliver"
msgstr "TOP -> Distanta minima intre elementele Solder Mask"

#: AppTools/ToolRulesCheck.py:1441
msgid "BOTTOM -> Minimum Solder Mask Sliver"
msgstr "BOTTOM -> Distanta minima intre elementele Solder Mask"

#: AppTools/ToolRulesCheck.py:1490
msgid "One of the Copper Gerber objects or the Excellon objects is not valid."
msgstr ""
"Unul dintre obiectele Gerber Cupru sau obiectele Excellon nu este valabil."

#: AppTools/ToolRulesCheck.py:1506
msgid ""
"Excellon object presence is mandatory for this rule but none is selected."
msgstr ""
"Prezența obiectului Excellon este obligatorie pentru această regulă, dar "
"niciunul nu este selectat."

#: AppTools/ToolRulesCheck.py:1579 AppTools/ToolRulesCheck.py:1592
#: AppTools/ToolRulesCheck.py:1603 AppTools/ToolRulesCheck.py:1616
msgid "STATUS"
msgstr "STARE"

#: AppTools/ToolRulesCheck.py:1582 AppTools/ToolRulesCheck.py:1606
msgid "FAILED"
msgstr "A EȘUAT"

#: AppTools/ToolRulesCheck.py:1595 AppTools/ToolRulesCheck.py:1619
msgid "PASSED"
msgstr "A TRECUT"

#: AppTools/ToolRulesCheck.py:1596 AppTools/ToolRulesCheck.py:1620
msgid "Violations: There are no violations for the current rule."
msgstr "Încălcări: nu există încălcări pentru regula actuală."

#: AppTools/ToolShell.py:74 AppTools/ToolShell.py:76
msgid "...processing..."
msgstr "...in procesare..."

#: AppTools/ToolSolderPaste.py:37
msgid "Solder Paste Tool"
msgstr "Unealta DispensorPF"

#: AppTools/ToolSolderPaste.py:69
msgid "Gerber Solder paste object.                        "
msgstr "Obiect Gerber cu masca pt dispensarea de pastă de fludor. "

#: AppTools/ToolSolderPaste.py:76
msgid ""
"Tools pool from which the algorithm\n"
"will pick the ones used for dispensing solder paste."
msgstr ""
"Un număr de unelte (nozzle) din care algoritmul va alege pe acelea\n"
"care vor fi folosite pentru dispensarea pastei de fludor."

#: AppTools/ToolSolderPaste.py:91
msgid ""
"This is the Tool Number.\n"
"The solder dispensing will start with the tool with the biggest \n"
"diameter, continuing until there are no more Nozzle tools.\n"
"If there are no longer tools but there are still pads not covered\n"
" with solder paste, the app will issue a warning message box."
msgstr ""
"Numărul Uneltei.\n"
"Dispensarea de pastă de fludor va incepe cu unealta care are dia\n"
"cel mai mare și va continua pana numai sunt unelte Nozzle disponibile\n"
"sau procesul s-a terminat.\n"
"Daca numai sunt unelte dar mai sunt inca paduri neacoperite de pastă de \n"
"fludor, aplicaţia va afisa un mesaj de avertizare in Status Bar."

#: AppTools/ToolSolderPaste.py:98
msgid ""
"Nozzle tool Diameter. It's value (in current FlatCAM units)\n"
"is the width of the solder paste dispensed."
msgstr ""
"Diametrul uneltei Nozzle. Valoarea sa (in unitati de maura curente)\n"
"este lăţimea cantiatii de pastă de fludor dispensata."

#: AppTools/ToolSolderPaste.py:105
msgid "New Nozzle Tool"
msgstr "Unealtă noua"

#: AppTools/ToolSolderPaste.py:124
msgid ""
"Add a new nozzle tool to the Tool Table\n"
"with the diameter specified above."
msgstr ""
"Adaugă o unealtă nouă tip Nozzle in Tabela de Unelte\n"
"cu diametrul specificat mai sus."

#: AppTools/ToolSolderPaste.py:136
msgid "Generate solder paste dispensing geometry."
msgstr "Generează un obiect Geometrie pt dispensarea de pastă de fludor."

#: AppTools/ToolSolderPaste.py:155
msgid "STEP 1"
msgstr "PAS 1"

#: AppTools/ToolSolderPaste.py:157
msgid ""
"First step is to select a number of nozzle tools for usage\n"
"and then optionally modify the GCode parameters below."
msgstr ""
"Primul pas este să se efectueza o selecţie de unelte Nozzl pt \n"
"utilizare și apoi in mod optional, să se modifice parametrii\n"
"GCode de mai jos."

#: AppTools/ToolSolderPaste.py:160
msgid ""
"Select tools.\n"
"Modify parameters."
msgstr ""
"Selectează unelte.\n"
"Modifica parametri."

#: AppTools/ToolSolderPaste.py:280
msgid ""
"Feedrate (speed) while moving up vertically\n"
" to Dispense position (on Z plane)."
msgstr ""
"Viteza de deplasare la mișcarea pe verticala spre\n"
"poziţia de dispensare (in planul Z)."

#: AppTools/ToolSolderPaste.py:350
msgid ""
"Generate GCode for Solder Paste dispensing\n"
"on PCB pads."
msgstr ""
"Generează  GCode pt dispensarea\n"
"de pastă de fludor pe padurile PCB."

#: AppTools/ToolSolderPaste.py:371
msgid "STEP 2"
msgstr "PAS 2"

#: AppTools/ToolSolderPaste.py:373
msgid ""
"Second step is to create a solder paste dispensing\n"
"geometry out of an Solder Paste Mask Gerber file."
msgstr ""
"Al 2-lea pas este să se creeze un obiect Geometrie pt dispensarea\n"
"de pastă de fludor, dintr-un fişier Gerber cu datele mastii de plasare\n"
"a pastei de fludor."

#: AppTools/ToolSolderPaste.py:390
msgid "Geo Result"
msgstr "Rezultat Geo"

#: AppTools/ToolSolderPaste.py:392
msgid ""
"Geometry Solder Paste object.\n"
"The name of the object has to end in:\n"
"'_solderpaste' as a protection."
msgstr ""
"Obiect Geometrie pt dispensare pastă de fludor.\n"
"Numele obiectului trebuie să se termine obligatoriu\n"
"in: '_solderpaste'."

#: AppTools/ToolSolderPaste.py:401
msgid "STEP 3"
msgstr "PAS 3"

#: AppTools/ToolSolderPaste.py:403
msgid ""
"Third step is to select a solder paste dispensing geometry,\n"
"and then generate a CNCJob object.\n"
"\n"
"REMEMBER: if you want to create a CNCJob with new parameters,\n"
"first you need to generate a geometry with those new params,\n"
"and only after that you can generate an updated CNCJob."
msgstr ""
"Al 3-lea pas este selectia unei geometrii de dispensare a pastei de fludor\n"
"urmata de generarea unui obiect tip CNCJob.\n"
"\n"
"ATENTIE: daca se dorește crearea un ui obiect CNCJob cu param. noi,\n"
"mai intai trebuie generat obiectul Geometrie cu acei parametri noi și abia\n"
"apoi se poate genera un obiect CNCJob actualizat."

#: AppTools/ToolSolderPaste.py:424
msgid "CNC Result"
msgstr "Rezultat CNC"

#: AppTools/ToolSolderPaste.py:426
msgid ""
"CNCJob Solder paste object.\n"
"In order to enable the GCode save section,\n"
"the name of the object has to end in:\n"
"'_solderpaste' as a protection."
msgstr ""
"Obiect CNCJob pt dispensare pastă de fludor.\n"
"Pt a activa sectiunea de Salvare GCode,\n"
"numele obiectului trebuie să se termine obligatoriu in:\n"
"'_solderpaste'."

#: AppTools/ToolSolderPaste.py:436
msgid "View GCode"
msgstr "Vizualiz. GCode"

#: AppTools/ToolSolderPaste.py:438
msgid ""
"View the generated GCode for Solder Paste dispensing\n"
"on PCB pads."
msgstr ""
"Vizualizează codul GCode generat pt dispensarea de \n"
"pastă de fludor pe padurile PCB-ului."

#: AppTools/ToolSolderPaste.py:448
msgid "Save GCode"
msgstr "Salvează GCode"

#: AppTools/ToolSolderPaste.py:450
msgid ""
"Save the generated GCode for Solder Paste dispensing\n"
"on PCB pads, to a file."
msgstr ""
"Salvează codul GCode generat pt dispensare pastă de fludor\n"
"pe padurile unui PCB, intr-un fişier pe HDD."

#: AppTools/ToolSolderPaste.py:460
msgid "STEP 4"
msgstr "PAS 4"

#: AppTools/ToolSolderPaste.py:462
msgid ""
"Fourth step (and last) is to select a CNCJob made from \n"
"a solder paste dispensing geometry, and then view/save it's GCode."
msgstr ""
"Al 4-lea pas (ultimul) este să se selecteze un obiect CNCJob realizat\n"
"dintr-un obiect Geometrie pt dispensarea de pastă de fludor, apoi \n"
"avand posibilitatea de a vizualiza continutul acestuia sau de a-l salva\n"
"intr-un fişier GCode pe HDD."

#: AppTools/ToolSolderPaste.py:922
msgid "New Nozzle tool added to Tool Table."
msgstr "A fost adăugată o noua unealtă Nozzle in Tabela de Unelte."

#: AppTools/ToolSolderPaste.py:965
msgid "Nozzle tool from Tool Table was edited."
msgstr "Unealta Nozzle din Tabela de Unelte a fost editată."

#: AppTools/ToolSolderPaste.py:1024
msgid "Delete failed. Select a Nozzle tool to delete."
msgstr "Ștergerea a eșuat. Selectează o unealtă Nozzle pt a o șterge."

#: AppTools/ToolSolderPaste.py:1030
msgid "Nozzle tool(s) deleted from Tool Table."
msgstr "Uneltele (nozzle) au fost șterse din Tabela de Unelte."

#: AppTools/ToolSolderPaste.py:1086
msgid "No SolderPaste mask Gerber object loaded."
msgstr ""
"Nu este incărcat ni-un obiect Gerber cu informatia măstii pt pasta de fludor."

#: AppTools/ToolSolderPaste.py:1104
msgid "Creating Solder Paste dispensing geometry."
msgstr "Se creează Geometrie pt dispensare pastă de fludor."

#: AppTools/ToolSolderPaste.py:1117
msgid "No Nozzle tools in the tool table."
msgstr "Nu sunt unelte Nozzle in Tabela de Unelte."

#: AppTools/ToolSolderPaste.py:1243
msgid "Cancelled. Empty file, it has no geometry..."
msgstr "Anulat. Fişier gol, nu are geometrie ..."

#: AppTools/ToolSolderPaste.py:1246
msgid "Solder Paste geometry generated successfully"
msgstr ""
"Obiectul Geometrie pt dispens. de pastă de fludor a fost generat cu succes"

#: AppTools/ToolSolderPaste.py:1253
msgid "Some or all pads have no solder due of inadequate nozzle diameters..."
msgstr ""
"Cel puțin unele pad-uri nu au pastă de fludor datorita diametrelor uneltelor "
"(nozzle) ne adecvate."

#: AppTools/ToolSolderPaste.py:1267
msgid "Generating Solder Paste dispensing geometry..."
msgstr "Se generează Geometria de dispensare a pastei de fludor ..."

#: AppTools/ToolSolderPaste.py:1287
msgid "There is no Geometry object available."
msgstr "Nu există obiect Geometrie disponibil."

#: AppTools/ToolSolderPaste.py:1292
msgid "This Geometry can't be processed. NOT a solder_paste_tool geometry."
msgstr ""
"Acest obiect Geometrie nu poate fi procesat Nu este o Geometrie tip "
"solder_paste_tool."

#: AppTools/ToolSolderPaste.py:1328
msgid "An internal error has ocurred. See shell.\n"
msgstr ""
"A apărut o eroare internă. Verifică in TCL Shell pt mai multe detalii.\n"

#: AppTools/ToolSolderPaste.py:1393
msgid "ToolSolderPaste CNCjob created"
msgstr "ToolSolderPaste CNCjob a fost creat"

#: AppTools/ToolSolderPaste.py:1412
msgid "SP GCode Editor"
msgstr "Editor GCode SP"

#: AppTools/ToolSolderPaste.py:1424 AppTools/ToolSolderPaste.py:1429
#: AppTools/ToolSolderPaste.py:1484
msgid ""
"This CNCJob object can't be processed. NOT a solder_paste_tool CNCJob object."
msgstr ""
"Acest obiect CNCJob nu poate fi procesat. Nu este un obiect CNCJob tip "
"'solder_paste_tool'."

#: AppTools/ToolSolderPaste.py:1454
msgid "No Gcode in the object"
msgstr "Nu există cod GCode in acest obiect"

#: AppTools/ToolSolderPaste.py:1494
msgid "Export GCode ..."
msgstr "Exporta GCode ..."

#: AppTools/ToolSolderPaste.py:1542
msgid "Solder paste dispenser GCode file saved to"
msgstr "Fişierul GCode pt dispensare pastă de fludor este salvat in"

#: AppTools/ToolSub.py:65
msgid "Gerber Objects"
msgstr "Obiecte Gerber"

#: AppTools/ToolSub.py:78
msgid ""
"Gerber object from which to subtract\n"
"the subtractor Gerber object."
msgstr ""
"Obiectul Gerber din care se scade \n"
"obiectul Gerber substractor."

#: AppTools/ToolSub.py:91 AppTools/ToolSub.py:146
msgid "Subtractor"
msgstr "Substractor"

#: AppTools/ToolSub.py:93
msgid ""
"Gerber object that will be subtracted\n"
"from the target Gerber object."
msgstr ""
"Obiectul Gerber care se scade din \n"
"obiectul Gerber tintă."

#: AppTools/ToolSub.py:100
msgid "Subtract Gerber"
msgstr "Execută"

#: AppTools/ToolSub.py:102
msgid ""
"Will remove the area occupied by the subtractor\n"
"Gerber from the Target Gerber.\n"
"Can be used to remove the overlapping silkscreen\n"
"over the soldermask."
msgstr ""
"Va indepărta aria ocupată de obiectul \n"
"Gerber substractor din obiectul Gerber tintă.\n"
"Poate fi utilizat pt. a indepărta silkscreen-ul\n"
"care se suprapune peste soldermask."

#: AppTools/ToolSub.py:120
msgid "Geometry Objects"
msgstr "Obiecte Geometrie"

#: AppTools/ToolSub.py:133
msgid ""
"Geometry object from which to subtract\n"
"the subtractor Geometry object."
msgstr ""
"Obiectul Geometrie din care se scade \n"
"obiectul Geometrie substractor."

#: AppTools/ToolSub.py:148
msgid ""
"Geometry object that will be subtracted\n"
"from the target Geometry object."
msgstr ""
"Obiectul Geometrie care se va scădea \n"
"din obiectul Geometrie tintă."

#: AppTools/ToolSub.py:156
msgid ""
"Checking this will close the paths cut by the Geometry subtractor object."
msgstr ""
"Verificând aceasta, se vor închide căile tăiate de obiectul tăietor de tip "
"Geometrie."

#: AppTools/ToolSub.py:159
msgid "Subtract Geometry"
msgstr "Scadeti Geometria"

#: AppTools/ToolSub.py:161
msgid ""
"Will remove the area occupied by the subtractor\n"
"Geometry from the Target Geometry."
msgstr ""
"Va indepărta aria ocupată de obiectul Geometrie \n"
"substractor din obiectul Geometrie tintă."

#: AppTools/ToolSub.py:263
msgid "Sub Tool"
msgstr "Unealta Scădere"

#: AppTools/ToolSub.py:284 AppTools/ToolSub.py:489
msgid "No Target object loaded."
msgstr "Nu este incărcat un obiect Tintă."

#: AppTools/ToolSub.py:287
msgid "Loading geometry from Gerber objects."
msgstr "Se Încarcă geometria din obiectele Gerber."

#: AppTools/ToolSub.py:299 AppTools/ToolSub.py:504
msgid "No Subtractor object loaded."
msgstr "Nu este incărcat obiect Substractor (scăzător)."

#: AppTools/ToolSub.py:331
msgid "Processing geometry from Subtractor Gerber object."
msgstr "Procesarea geometriei din obiectul Gerber Scăzător."

#: AppTools/ToolSub.py:352
msgid "Parsing geometry for aperture"
msgstr "Se analizează Geometria pt apertura"

#: AppTools/ToolSub.py:413
msgid "Finished parsing geometry for aperture"
msgstr "S-a terminat analiza geometriei pt apertura"

#: AppTools/ToolSub.py:458 AppTools/ToolSub.py:661
msgid "Generating new object ..."
msgstr "Se generează un obiect nou ..."

#: AppTools/ToolSub.py:462 AppTools/ToolSub.py:665 AppTools/ToolSub.py:746
msgid "Generating new object failed."
msgstr "Generarea unui obiect nou a esuat."

#: AppTools/ToolSub.py:467 AppTools/ToolSub.py:671
msgid "Created"
msgstr "Creat"

#: AppTools/ToolSub.py:518
msgid "Currently, the Subtractor geometry cannot be of type Multigeo."
msgstr "Momentan, obiectul substractor Geometrie nu poate fi de tip Multigeo."

#: AppTools/ToolSub.py:563
msgid "Parsing solid_geometry ..."
msgstr "Analizează geometria solidă..."

#: AppTools/ToolSub.py:565
msgid "Parsing solid_geometry for tool"
msgstr "Se analizează Geometria pt unealta"

#: AppTools/ToolTransform.py:23
msgid "Object Transform"
msgstr "Transformare Obiect"

#: AppTools/ToolTransform.py:78
msgid ""
"Rotate the selected object(s).\n"
"The point of reference is the middle of\n"
"the bounding box for all selected objects."
msgstr ""
"Roteste obiectele selectate.\n"
"Punctul de referinţă este mijlocul \n"
"formei înconjurătoare pt toate obiectele."

#: AppTools/ToolTransform.py:99 AppTools/ToolTransform.py:120
msgid ""
"Angle for Skew action, in degrees.\n"
"Float number between -360 and 360."
msgstr ""
"Valoarea unghiului de Deformare, in grade.\n"
"Ia valori Reale între -360 si 360 grade."

#: AppTools/ToolTransform.py:109 AppTools/ToolTransform.py:130
msgid ""
"Skew/shear the selected object(s).\n"
"The point of reference is the middle of\n"
"the bounding box for all selected objects."
msgstr ""
"Deformează obiectele selectate.\n"
"Punctul de referinţă este mijlocul \n"
"formei înconjurătoare pt toate obiectele."

#: AppTools/ToolTransform.py:159 AppTools/ToolTransform.py:179
msgid ""
"Scale the selected object(s).\n"
"The point of reference depends on \n"
"the Scale reference checkbox state."
msgstr ""
"Scalează obiectele selectate.\n"
"Punctul de referinţă depinde  de\n"
"starea checkbox-ului >Referința Scalare<."

#: AppTools/ToolTransform.py:228 AppTools/ToolTransform.py:248
msgid ""
"Offset the selected object(s).\n"
"The point of reference is the middle of\n"
"the bounding box for all selected objects.\n"
msgstr ""
"Deplasează obiectele selectate.\n"
"Punctul de referinţă este mijlocul formei înconjurătoare\n"
"pentru toate obiectele selectate.\n"

#: AppTools/ToolTransform.py:268 AppTools/ToolTransform.py:273
msgid "Flip the selected object(s) over the X axis."
msgstr "Oglindește obiectele selectate pe axa X."

#: AppTools/ToolTransform.py:297
msgid "Ref. Point"
msgstr "Pt. Ref"

#: AppTools/ToolTransform.py:348
msgid ""
"Create the buffer effect on each geometry,\n"
"element from the selected object, using the distance."
msgstr ""
"Creați efectul buffer pe fiecare geometrie,\n"
"element din obiectul selectat, folosind distanta."

#: AppTools/ToolTransform.py:374
msgid ""
"Create the buffer effect on each geometry,\n"
"element from the selected object, using the factor."
msgstr ""
"Creați efectul buffer pe fiecare geometrie,\n"
"element din obiectul selectat, folosing un factor."

#: AppTools/ToolTransform.py:479
msgid "Buffer D"
msgstr "Bufer D"

#: AppTools/ToolTransform.py:480
msgid "Buffer F"
msgstr "Bufer F"

#: AppTools/ToolTransform.py:557
msgid "Rotate transformation can not be done for a value of 0."
msgstr "Transformarea Rotire nu se poate face pentru o valoare de 0."

#: AppTools/ToolTransform.py:596 AppTools/ToolTransform.py:619
msgid "Scale transformation can not be done for a factor of 0 or 1."
msgstr "Transformarea Scalare nu se poate face pentru un factor de 0 sau 1."

#: AppTools/ToolTransform.py:634 AppTools/ToolTransform.py:644
msgid "Offset transformation can not be done for a value of 0."
msgstr "Transformarea Deplasare nu se poate face pentru o valoare de 0."

#: AppTools/ToolTransform.py:676
msgid "No object selected. Please Select an object to rotate!"
msgstr ""
"Nici-un obiect nu este selectat. Selectează un obiect pentru a fi Rotit!"

#: AppTools/ToolTransform.py:702
msgid "CNCJob objects can't be rotated."
msgstr "Obiectele tip CNCJob nu pot fi Rotite."

#: AppTools/ToolTransform.py:710
msgid "Rotate done"
msgstr "Rotaţie efectuată"

#: AppTools/ToolTransform.py:713 AppTools/ToolTransform.py:783
#: AppTools/ToolTransform.py:833 AppTools/ToolTransform.py:887
#: AppTools/ToolTransform.py:917 AppTools/ToolTransform.py:953
msgid "Due of"
msgstr "Datorită"

#: AppTools/ToolTransform.py:713 AppTools/ToolTransform.py:783
#: AppTools/ToolTransform.py:833 AppTools/ToolTransform.py:887
#: AppTools/ToolTransform.py:917 AppTools/ToolTransform.py:953
msgid "action was not executed."
msgstr "actiunea nu a fost efectuată."

#: AppTools/ToolTransform.py:725
msgid "No object selected. Please Select an object to flip"
msgstr ""
"Nici-un obiect nu este selectat. Selectează un obiect pentru a fi Oglindit"

#: AppTools/ToolTransform.py:758
msgid "CNCJob objects can't be mirrored/flipped."
msgstr "Obiectele tip CNCJob nu pot fi Oglindite."

#: AppTools/ToolTransform.py:793
msgid "Skew transformation can not be done for 0, 90 and 180 degrees."
msgstr "Transformarea Inclinare nu se poate face la 0, 90 și 180 de grade."

#: AppTools/ToolTransform.py:798
msgid "No object selected. Please Select an object to shear/skew!"
msgstr ""
"Nici-un obiect nu este selectat. Selectează un obiect pentru a fi Deformat!"

#: AppTools/ToolTransform.py:818
msgid "CNCJob objects can't be skewed."
msgstr "Obiectele tip CNCJob nu pot fi deformate."

#: AppTools/ToolTransform.py:830
msgid "Skew on the"
msgstr "Deformează pe"

#: AppTools/ToolTransform.py:830 AppTools/ToolTransform.py:884
#: AppTools/ToolTransform.py:914
msgid "axis done"
msgstr "axa efectuată"

#: AppTools/ToolTransform.py:844
msgid "No object selected. Please Select an object to scale!"
msgstr ""
"Nici-un obiect nu este selectat. Selectează un obiect pentru a fi Scalat!"

#: AppTools/ToolTransform.py:875
msgid "CNCJob objects can't be scaled."
msgstr "Obiectele tip CNCJob nu pot fi scalate."

#: AppTools/ToolTransform.py:884
msgid "Scale on the"
msgstr "Scalează pe"

#: AppTools/ToolTransform.py:894
msgid "No object selected. Please Select an object to offset!"
msgstr ""
"Nici-un obiect nu este selectat. Selectează un obiect pentru a fi Ofsetat!"

#: AppTools/ToolTransform.py:901
msgid "CNCJob objects can't be offset."
msgstr "Obiectele tip CNCJob nu pot fi deplasate."

#: AppTools/ToolTransform.py:914
msgid "Offset on the"
msgstr "Ofset pe"

#: AppTools/ToolTransform.py:924
msgid "No object selected. Please Select an object to buffer!"
msgstr ""
"Nu a fost selectat niciun obiect. Vă rugăm să selectați un obiect de "
"tamponat (buffer)"

#: AppTools/ToolTransform.py:927
msgid "Applying Buffer"
msgstr "Aplicarea tampon (Buffer)"

#: AppTools/ToolTransform.py:931
msgid "CNCJob objects can't be buffered."
msgstr "CNCJob objects can't be buffered (buffer)."

#: AppTools/ToolTransform.py:948
msgid "Buffer done"
msgstr "Buffer finalizat"

#: AppTranslation.py:104
msgid "The application will restart."
msgstr "Aplicaţia va reporni ..."

#: AppTranslation.py:106
msgid "Are you sure do you want to change the current language to"
msgstr "Esti sigur că dorești să schimbi din limba curentă in"

#: AppTranslation.py:107
msgid "Apply Language ..."
msgstr "Aplică Traducere ..."

#: AppTranslation.py:201 App_Main.py:3089
msgid ""
"There are files/objects modified in FlatCAM. \n"
"Do you want to Save the project?"
msgstr ""
"FlatCAM are fişiere/obiecte care au fost modificate. \n"
"Dorești să Salvezi proiectul?"

#: AppTranslation.py:204 App_Main.py:3092 App_Main.py:6584
msgid "Save changes"
msgstr "Salvează modificarile"

#: App_Main.py:477
msgid "FlatCAM is initializing ..."
msgstr "FlatCAM se inițializează ..."

#: App_Main.py:623
msgid "Could not find the Language files. The App strings are missing."
msgstr "Nu am gasit fişierele cu traduceri. Mesajele aplicaţiei lipsesc."

#: App_Main.py:695
msgid ""
"FlatCAM is initializing ...\n"
"Canvas initialization started."
msgstr ""
"FlatCAM se inițializează ...\n"
"Initializarea spațiului de afisare a inceput."

#: App_Main.py:715
msgid ""
"FlatCAM is initializing ...\n"
"Canvas initialization started.\n"
"Canvas initialization finished in"
msgstr ""
"FlatCAM se inițializează ...\n"
"Initializarea spațiului de afisare a inceput.\n"
"Initializarea spatiului de afisare s-a terminat in"

#: App_Main.py:1568 App_Main.py:6695
msgid "New Project - Not saved"
msgstr "Proiect nou - Nu a fost salvat"

#: App_Main.py:1669
msgid ""
"Found old default preferences files. Please reboot the application to update."
msgstr ""
"Au fost găsite fișiere de preferințe implicite vechi. Vă rugăm să reporniți "
"aplicația pentru a le actualiza."

#: App_Main.py:1736
msgid "Open Config file failed."
msgstr "Deschiderea  fişierului de configurare a eşuat."

#: App_Main.py:1751
msgid "Open Script file failed."
msgstr "Deschiderea fişierului Script eşuat."

#: App_Main.py:1777
msgid "Open Excellon file failed."
msgstr "Deschiderea fişierului Excellon a eşuat."

#: App_Main.py:1790
msgid "Open GCode file failed."
msgstr "Deschiderea fişierului GCode a eşuat."

#: App_Main.py:1803
msgid "Open Gerber file failed."
msgstr "Deschiderea fişierului Gerber a eşuat."

#: App_Main.py:2117
#, fuzzy
#| msgid "Select a Geometry, Gerber or Excellon Object to edit."
msgid "Select a Geometry, Gerber, Excellon or CNCJob Object to edit."
msgstr "Selectează un obiect tip Geometrie Gerber sau Excellon pentru editare."

#: App_Main.py:2132
msgid ""
"Simultaneous editing of tools geometry in a MultiGeo Geometry is not "
"possible.\n"
"Edit only one geometry at a time."
msgstr ""
"Editarea simultană de geometrii ale uneltelor dintr-un obiect tip Geometrie "
"MultiGeo nu este posibilă.\n"
"Se poate edita numai o singură geometrie de fiecare dată."

#: App_Main.py:2198
msgid "Editor is activated ..."
msgstr "Editorul este activ ..."

#: App_Main.py:2219
msgid "Do you want to save the edited object?"
msgstr "Vrei sa salvezi obiectul editat?"

#: App_Main.py:2257
msgid "Object empty after edit."
msgstr "Obiectul nu are date dupa editare."

#: App_Main.py:2261 App_Main.py:2282 App_Main.py:2304
msgid "Editor exited. Editor content saved."
msgstr "Ieşire din Editor. Continuțul editorului este salvat."

#: App_Main.py:2308 App_Main.py:2331 App_Main.py:2349
msgid "Select a Gerber, Geometry or Excellon Object to update."
msgstr ""
"Selectează un obiect tip Gerber, Geometrie sau Excellon pentru actualizare."

#: App_Main.py:2311
msgid "is updated, returning to App..."
msgstr "este actualizat, întoarcere la aplicaţie..."

#: App_Main.py:2318
msgid "Editor exited. Editor content was not saved."
msgstr "Ieşire din Editor. Continuțul editorului nu a fost salvat."

#: App_Main.py:2444 App_Main.py:2448
msgid "Import FlatCAM Preferences"
msgstr "Importă Preferințele FlatCAM"

#: App_Main.py:2459
msgid "Imported Defaults from"
msgstr "Valorile default au fost importate din"

#: App_Main.py:2479 App_Main.py:2484
msgid "Export FlatCAM Preferences"
msgstr "Exportă Preferințele FlatCAM"

#: App_Main.py:2504
msgid "Exported preferences to"
msgstr "Exportă Preferințele in"

#: App_Main.py:2524 App_Main.py:2529
msgid "Save to file"
msgstr "Salvat in"

#: App_Main.py:2553
msgid "Could not load the file."
msgstr "Nu am putut incărca fişierul."

#: App_Main.py:2569
msgid "Exported file to"
msgstr "S-a exportat fişierul in"

#: App_Main.py:2626
msgid "Failed to open recent files file for writing."
msgstr ""
"Deschiderea fişierului cu >fişiere recente< pentru a fi salvat a eșuat."

#: App_Main.py:2637
msgid "Failed to open recent projects file for writing."
msgstr ""
"Deschiderea fişierului cu >proiecte recente< pentru a fi salvat a eșuat."

#: App_Main.py:2692
msgid "2D Computer-Aided Printed Circuit Board Manufacturing"
msgstr "Productie Cablaje Imprimate asistate 2D de PC"

#: App_Main.py:2693
msgid "Development"
msgstr "Dezvoltare"

#: App_Main.py:2694
msgid "DOWNLOAD"
msgstr "DOWNLOAD"

#: App_Main.py:2695
msgid "Issue tracker"
msgstr "Raportare probleme"

#: App_Main.py:2714
msgid "Licensed under the MIT license"
msgstr "Licențiat sub licența MIT"

#: App_Main.py:2723
msgid ""
"Permission is hereby granted, free of charge, to any person obtaining a "
"copy\n"
"of this software and associated documentation files (the \"Software\"), to "
"deal\n"
"in the Software without restriction, including without limitation the "
"rights\n"
"to use, copy, modify, merge, publish, distribute, sublicense, and/or sell\n"
"copies of the Software, and to permit persons to whom the Software is\n"
"furnished to do so, subject to the following conditions:\n"
"\n"
"The above copyright notice and this permission notice shall be included in\n"
"all copies or substantial portions of the Software.\n"
"\n"
"THE SOFTWARE IS PROVIDED \"AS IS\", WITHOUT WARRANTY OF ANY KIND, EXPRESS "
"OR\n"
"IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,\n"
"FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE\n"
"AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER\n"
"LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING "
"FROM,\n"
"OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN\n"
"THE SOFTWARE."
msgstr ""
"Prin prezenta se acordă, gratuit, oricărei persoane care obține o copie\n"
"a acestui software și a fișierelor de documentație asociate („Software”), "
"pentru a utiliza\n"
"acest software fără restricții, inclusiv fără limitare a drepturilor\n"
"să folosească, să copieze, să modifice, să îmbine, să publice, să "
"distribuie, să licentieze mai departe și / sau să vândă\n"
"copii ale Software-ului și pentru a permite persoanelor cărora le este "
"oferit Software-ul\n"
"aceleasi drepturi, cu respectarea următoarelor condiții:\n"
"\n"
"Notificarea privind drepturile de autor de mai sus și această notificare de "
"permisiune sunt incluse în\n"
"toate copiile sau porțiuni substanțiale ale Software-ului.\n"
"\n"
"SOFTWARE-ul ESTE FURNIZAT „AșA CUM ESTE”, FĂRĂ GARANȚIE DE NICI-UN TIP, "
"EXPRIMATĂ SAU\n"
"IMPLICITĂ, INCLUZAND DAR FĂRĂ A FI LIMITAT LA GARANȚIILE DE "
"COMERCIABILITATE,\n"
"CONFORMITATE PENTRU UN SCOP PARTICULAR ȘI NONFRINGEMENT. SUB NICI-O FORMĂ, "
"NICIODĂ\n"
"AUTORII SAU DEȚINĂTORII DREPTULUI DE COPYRIGHT NU VOR FI TINUTI RASPUNZATORI "
"CU PRIVIRE LA\n"
"ORICE DAUNE, PRETENTII SAU ALTE RESPONSABILITATI, CAUZATE DE UN CONTRACT SAU "
"ORICE ALTA CAUZA,\n"
"CA URMARE A UTILIZARII PROGRAMULUI SAU ÎN CONEXIUNE CU PROGRAMUL, SAU "
"UTILIZAREA SA,\n"
"SAU ORICE TRATĂRI ÎN ACEST SOFTWARE."

#: App_Main.py:2745
msgid ""
"Some of the icons used are from the following sources:<br><div>Icons by <a "
"href=\"https://www.flaticon.com/authors/freepik\" title=\"Freepik\">Freepik</"
"a> from <a href=\"https://www.flaticon.com/\"             title=\"Flaticon"
"\">www.flaticon.com</a></div><div>Icons by <a target=\"_blank\" href="
"\"https://icons8.com\">Icons8</a></div>Icons by <a href=\"http://www."
"onlinewebfonts.com\">oNline Web Fonts</a>"
msgstr ""
"Unele dintre icon-uri sunt preluate din urmatoarele surse: "
"<br><div>Pictograme create de <a href=\"https://www.flaticon.com/authors/"
"freepik\" title=\"Freepik\">Freepik</a> de la <a href=\"https://www.flaticon."
"com/\"             title=\"Flaticon\">www.flaticon.com</a></"
"div><div>Pictograme create de <a target=\"_blank\" href=\"https://icons8.com"
"\">Icons8</a></dic>Pictograme create de <a href=\"http://www.onlinewebfonts."
"com\">oNline Web Fonts</a>"

#: App_Main.py:2778
msgid "Splash"
msgstr "Splash"

#: App_Main.py:2784
msgid "Programmers"
msgstr "Programatori"

#: App_Main.py:2790
msgid "Translators"
msgstr "Traducatori"

#: App_Main.py:2796
msgid "License"
msgstr "Licență"

#: App_Main.py:2802
msgid "Attributions"
msgstr "Atribuiri"

#: App_Main.py:2825
msgid "Programmer"
msgstr "Programator"

#: App_Main.py:2826
msgid "Status"
msgstr "Statut"

#: App_Main.py:2827 App_Main.py:2907
msgid "E-mail"
msgstr "E-mail"

#: App_Main.py:2830
msgid "Program Author"
msgstr "Autorul Programului"

#: App_Main.py:2835
msgid "BETA Maintainer >= 2019"
msgstr "Programator Beta >= 2019"

#: App_Main.py:2904
msgid "Language"
msgstr "Limba"

#: App_Main.py:2905
msgid "Translator"
msgstr "Traducător"

#: App_Main.py:2906
msgid "Corrections"
msgstr "Corecţii"

#: App_Main.py:3051
msgid ""
"This entry will resolve to another website if:\n"
"\n"
"1. FlatCAM.org website is down\n"
"2. Someone forked FlatCAM project and wants to point\n"
"to his own website\n"
"\n"
"If you can't get any informations about FlatCAM beta\n"
"use the YouTube channel link from the Help menu."
msgstr ""
"Această intrare se va rezolva către un alt site web dacă:\n"
"\n"
"1. Site-ul web FlatCAM.org este indisponibil\n"
"2. Cineva a duplicat proiectul FlatCAM și vrea să pună link\n"
"la propriul său site web\n"
"\n"
"Dacă nu puteți obține informații despre FlatCAM beta\n"
"utilizați linkul canalului YouTube din meniul Ajutor."

#: App_Main.py:3058
msgid "Alternative website"
msgstr "Site alternativ"

#: App_Main.py:3357
msgid "Selected Excellon file extensions registered with FlatCAM."
msgstr "Extensiile de fișiere Excellon selectate înregistrate cu FlatCAM."

#: App_Main.py:3379
msgid "Selected GCode file extensions registered with FlatCAM."
msgstr "Extensii de fișiere GCode selectate înregistrate cu FlatCAM."

#: App_Main.py:3401
msgid "Selected Gerber file extensions registered with FlatCAM."
msgstr "Extensii de fișiere Gerber selectate înregistrate cu FlatCAM."

#: App_Main.py:3589 App_Main.py:3648 App_Main.py:3676
msgid "At least two objects are required for join. Objects currently selected"
msgstr ""
"Cel puțin două obiecte sunt necesare pentru a fi unite. Obiectele selectate "
"în prezent"

#: App_Main.py:3598
msgid ""
"Failed join. The Geometry objects are of different types.\n"
"At least one is MultiGeo type and the other is SingleGeo type. A possibility "
"is to convert from one to another and retry joining \n"
"but in the case of converting from MultiGeo to SingleGeo, informations may "
"be lost and the result may not be what was expected. \n"
"Check the generated GCODE."
msgstr ""
"Fuziune eșuata. Obiectele Geometrii sunt de tipuri diferite.\n"
"Cel puțin unul este de tip Multigeo și celalalt este tip SinglGeo. O "
"posibilitate este să convertesti dintr-unul in celalalt și să reincerci "
"fuzionarea \n"
"dar un cazul conversiei de la MultiGeo to SingleGeo, se pot pierde "
"informatii și rezultatul ar putea să nu fie cel dorit. \n"
"Verifică codul G-Code generat."

#: App_Main.py:3610 App_Main.py:3620
msgid "Geometry merging finished"
msgstr "Fuziunea geometriei s-a terminat"

#: App_Main.py:3643
msgid "Failed. Excellon joining works only on Excellon objects."
msgstr ""
"Eșuat. Fuzionarea Excellon functionează doar cu obiecte de tip Excellon."

#: App_Main.py:3653
msgid "Excellon merging finished"
msgstr "Fuziunea Excellon a fost terminată"

#: App_Main.py:3671
msgid "Failed. Gerber joining works only on Gerber objects."
msgstr "Eșuat. Fuzionarea Gerber functionează doar cu obiecte de tip Gerber ."

#: App_Main.py:3681
msgid "Gerber merging finished"
msgstr "Fuziunea Gerber a fost terminată"

#: App_Main.py:3701 App_Main.py:3738
msgid "Failed. Select a Geometry Object and try again."
msgstr "Eșuat. Selectează un obiect Geometrie și încearcă din nou."

#: App_Main.py:3705 App_Main.py:3743
msgid "Expected a GeometryObject, got"
msgstr "Se astepta o Geometrie FlatCAM, s-a primit"

#: App_Main.py:3720
msgid "A Geometry object was converted to MultiGeo type."
msgstr "Un obiect Geometrie a fost convertit la tipul MultiGeo."

#: App_Main.py:3758
msgid "A Geometry object was converted to SingleGeo type."
msgstr "Un obiect Geometrie a fost convertit la tipul SingleGeo ."

#: App_Main.py:3964
msgid "Toggle Units"
msgstr "Comută Unitati"

#: App_Main.py:3966
msgid ""
"Changing the units of the project\n"
"will scale all objects.\n"
"\n"
"Do you want to continue?"
msgstr ""
"Schimbarea unităților proiectului\n"
"va scala toate obiectele.\n"
"\n"
"Doriți să continuați?"

#: App_Main.py:3969 App_Main.py:4451 App_Main.py:4528 App_Main.py:6972
#: App_Main.py:6986 App_Main.py:7319 App_Main.py:7329
msgid "Ok"
msgstr "Ok"

#: App_Main.py:4019
msgid "Converted units to"
msgstr "Unitătile au fost convertite in"

#: App_Main.py:4351
msgid "Detachable Tabs"
msgstr "Taburi detașabile"

#: App_Main.py:4380
#, fuzzy
#| msgid "Workspace Settings"
msgid "Workspace enabled."
msgstr "Setări ale Spațiului de Lucru"

#: App_Main.py:4383
#, fuzzy
#| msgid "Workspace Settings"
msgid "Workspace disabled."
msgstr "Setări ale Spațiului de Lucru"

#: App_Main.py:4447
msgid ""
"Adding Tool works only when Advanced is checked.\n"
"Go to Preferences -> General - Show Advanced Options."
msgstr ""
"Adăugarea de unelte noi functionează doar in modul Avansat.\n"
"Pentru aceasta mergi in Preferințe -> General - Activează Modul Avansat."

#: App_Main.py:4523
msgid "Delete objects"
msgstr "Șterge obiectele"

#: App_Main.py:4526
msgid ""
"Are you sure you want to permanently delete\n"
"the selected objects?"
msgstr ""
"Sigur doriți să ștergeți definitiv\n"
"obiectele selectate?"

#: App_Main.py:4564
msgid "Object(s) deleted"
msgstr "Obiect(ele) șters(e)"

#: App_Main.py:4574
msgid "Save the work in Editor and try again ..."
msgstr "Salvează continutul din Editor și încearcă din nou."

#: App_Main.py:4603
msgid "Object deleted"
msgstr "Obiectul este șters"

#: App_Main.py:4630
msgid "Click to set the origin ..."
msgstr "Click pentru a seta originea..."

#: App_Main.py:4652
msgid "Setting Origin..."
msgstr "Setează Originea..."

#: App_Main.py:4665 App_Main.py:4767
msgid "Origin set"
msgstr "Originea a fost setată"

#: App_Main.py:4682
msgid "Origin coordinates specified but incomplete."
msgstr "Coordonate pentru origine specificate, dar incomplete."

#: App_Main.py:4723
msgid "Moving to Origin..."
msgstr "Deplasare către Origine..."

#: App_Main.py:4804
msgid "Jump to ..."
msgstr "Sari la ..."

#: App_Main.py:4805
msgid "Enter the coordinates in format X,Y:"
msgstr "Introduceți coordonatele in format X,Y:"

#: App_Main.py:4815
msgid "Wrong coordinates. Enter coordinates in format: X,Y"
msgstr "Coordonate gresite. Introduceți coordonatele in format X,Y"

#: App_Main.py:4933
msgid "Bottom-Left"
msgstr "Stânga jos"

#: App_Main.py:4936
msgid "Top-Right"
msgstr "Dreapta-sus"

#: App_Main.py:4957
msgid "Locate ..."
msgstr "Localizează ..."

#: App_Main.py:5220 App_Main.py:5297
msgid "No object is selected. Select an object and try again."
msgstr ""
"Nici-un obiect nu este selectat. Selectează un obiect și incearcă din nou."

#: App_Main.py:5323
msgid ""
"Aborting. The current task will be gracefully closed as soon as possible..."
msgstr "Intrerup. Taskul curent va fi închis cât mai curând posibil ..."

#: App_Main.py:5329
msgid "The current task was gracefully closed on user request..."
msgstr "Taskul curent a fost închis la cererea utilizatorului ..."

#: App_Main.py:5474
msgid "Tools in Tools Database edited but not saved."
msgstr "Uneltele din Baza de date au fost editate dar nu au fost salvate."

#: App_Main.py:5503
msgid "Adding tool from DB is not allowed for this object."
msgstr ""
"Adaugarea unei unelte din Baza de date nu este permisa pt acest obiect."

#: App_Main.py:5521
msgid ""
"One or more Tools are edited.\n"
"Do you want to update the Tools Database?"
msgstr ""
"Unul sau mai multe Unelte sunt editate.\n"
"Doriți să actualizați baza de date a Uneltelor?"

#: App_Main.py:5523
msgid "Save Tools Database"
msgstr "Salvează baza de date Unelte"

#: App_Main.py:5576
msgid "No object selected to Flip on Y axis."
msgstr "Nu sete nici-un obiect selectat pentru oglindire pe axa Y."

#: App_Main.py:5602
msgid "Flip on Y axis done."
msgstr "Oglindire pe axa Y executată."

#: App_Main.py:5624
msgid "No object selected to Flip on X axis."
msgstr "Nu este nici-un obiect selectat pentru oglindire pe axa X."

#: App_Main.py:5650
msgid "Flip on X axis done."
msgstr "Oglindirea pe axa X executată."

#: App_Main.py:5672
msgid "No object selected to Rotate."
msgstr "Nici-un obiect selectat pentru Rotaţie."

#: App_Main.py:5675 App_Main.py:5726 App_Main.py:5763
msgid "Transform"
msgstr "Transformare"

#: App_Main.py:5675 App_Main.py:5726 App_Main.py:5763
msgid "Enter the Angle value:"
msgstr "Introduceți valoaea Unghiului:"

#: App_Main.py:5705
msgid "Rotation done."
msgstr "Rotaţie executată."

#: App_Main.py:5707
msgid "Rotation movement was not executed."
msgstr "Mișcarea de rotație nu a fost executată."

#: App_Main.py:5724
msgid "No object selected to Skew/Shear on X axis."
msgstr "Nici-un obiect nu este selectat pentru Deformare pe axa X."

#: App_Main.py:5745
msgid "Skew on X axis done."
msgstr "Deformare pe axa X terminată."

#: App_Main.py:5761
msgid "No object selected to Skew/Shear on Y axis."
msgstr "Nici-un obiect nu este selectat pentru Deformare pe axa Y."

#: App_Main.py:5782
msgid "Skew on Y axis done."
msgstr "Deformare pe axa Y terminată."

#: App_Main.py:5861
msgid "New Grid ..."
msgstr "Grid nou ..."

#: App_Main.py:5862
msgid "Enter a Grid Value:"
msgstr "Introduceti of valoare pt Grid:"

#: App_Main.py:5870 App_Main.py:5894
msgid "Please enter a grid value with non-zero value, in Float format."
msgstr "Introduceți o valoare pentru Grila ne-nula și in format Real."

#: App_Main.py:5875
msgid "New Grid added"
msgstr "Grid nou"

#: App_Main.py:5877
msgid "Grid already exists"
msgstr "Grila există deja"

#: App_Main.py:5879
msgid "Adding New Grid cancelled"
msgstr "Adăugarea unei valori de Grilă a fost anulată"

#: App_Main.py:5900
msgid " Grid Value does not exist"
msgstr " Valoarea Grilei nu există"

#: App_Main.py:5902
msgid "Grid Value deleted"
msgstr "Valoarea Grila a fost stearsă"

#: App_Main.py:5904
msgid "Delete Grid value cancelled"
msgstr "Ștergerea unei valori de Grilă a fost anulată"

#: App_Main.py:5910
msgid "Key Shortcut List"
msgstr "Lista de shortcut-uri"

#: App_Main.py:5944
msgid " No object selected to copy it's name"
msgstr " Nici-un obiect nu este selectat pentru i se copia valoarea"

#: App_Main.py:5948
msgid "Name copied on clipboard ..."
msgstr "Numele a fost copiat pe Clipboard ..."

#: App_Main.py:6581
msgid ""
"There are files/objects opened in FlatCAM.\n"
"Creating a New project will delete them.\n"
"Do you want to Save the project?"
msgstr ""
"Exista fişiere/obiecte deschide in FlatCAM.\n"
"Crearea unui nou Proiect le va șterge..\n"
"Doriti să Salvati proiectul curentt?"

#: App_Main.py:6602
msgid "New Project created"
msgstr "Un nou Proiect a fost creat"

#: App_Main.py:6772 App_Main.py:6809 App_Main.py:6851 App_Main.py:6921
#: App_Main.py:7704 App_Main.py:8917 App_Main.py:8979
msgid ""
"Canvas initialization started.\n"
"Canvas initialization finished in"
msgstr ""
"FlatCAM se inițializează ...\n"
"Initializarea spațiului de afisare s-a terminat in"

#: App_Main.py:6774
msgid "Opening Gerber file."
msgstr "Se incarcă un fişier Gerber."

#: App_Main.py:6811
msgid "Opening Excellon file."
msgstr "Se incarcă un fişier Excellon."

#: App_Main.py:6842 App_Main.py:6846
msgid "Open G-Code"
msgstr "Încarcă G-Code"

#: App_Main.py:6853
msgid "Opening G-Code file."
msgstr "Se incarcă un fişier G-Code."

#: App_Main.py:6912 App_Main.py:6916
msgid "Open HPGL2"
msgstr "Încarcă HPGL2"

#: App_Main.py:6923
msgid "Opening HPGL2 file."
msgstr "Se incarcă un fişier HPGL2."

#: App_Main.py:6946 App_Main.py:6949
msgid "Open Configuration File"
msgstr "Încarcă un fişier de Configurare"

#: App_Main.py:6969 App_Main.py:7316
msgid "Please Select a Geometry object to export"
msgstr "Selectează un obiect Geometrie pentru export"

#: App_Main.py:6983
msgid "Only Geometry, Gerber and CNCJob objects can be used."
msgstr "Doar obiectele Geometrie, Gerber și CNCJob pot fi folosite."

#: App_Main.py:7025
msgid "Data must be a 3D array with last dimension 3 or 4"
msgstr ""
"Datele trebuie să fie organizate intr-o arie 3D cu ultima dimensiune cu "
"valoarea 3 sau 4"

#: App_Main.py:7031 App_Main.py:7035
msgid "Export PNG Image"
msgstr "Exporta imagine PNG"

#: App_Main.py:7068 App_Main.py:7276
msgid "Failed. Only Gerber objects can be saved as Gerber files..."
msgstr "Eșuat. Doar obiectele tip Gerber pot fi salvate ca fişiere Gerber..."

#: App_Main.py:7080
msgid "Save Gerber source file"
msgstr "Salvează codul sursa Gerber ca fişier"

#: App_Main.py:7109
msgid "Failed. Only Script objects can be saved as TCL Script files..."
msgstr ""
"Eșuat. Doar obiectele tip Script pot fi salvate ca fişiere TCL Script..."

#: App_Main.py:7121
msgid "Save Script source file"
msgstr "Salvează codul sursa Script ca fişier"

#: App_Main.py:7150
msgid "Failed. Only Document objects can be saved as Document files..."
msgstr ""
"Eșuat. Doar obiectele tip Document pot fi salvate ca fişiere Document ..."

#: App_Main.py:7162
msgid "Save Document source file"
msgstr "Salvează codul sursa Document ca fişier"

#: App_Main.py:7191 App_Main.py:7232 App_Main.py:8187
msgid "Failed. Only Excellon objects can be saved as Excellon files..."
msgstr ""
"Eșuat. Doar obiectele tip Excellon pot fi salvate ca fişiere Excellon ..."

#: App_Main.py:7199 App_Main.py:7203
msgid "Save Excellon source file"
msgstr "Salvează codul sursa Excellon ca fişier"

#: App_Main.py:7240 App_Main.py:7244
msgid "Export Excellon"
msgstr "Exportă Excellon"

#: App_Main.py:7284 App_Main.py:7288
msgid "Export Gerber"
msgstr "Exportă Gerber"

#: App_Main.py:7326
msgid "Only Geometry objects can be used."
msgstr "Doar obiecte tip Geometrie pot fi folosite."

#: App_Main.py:7340 App_Main.py:7344
msgid "Export DXF"
msgstr "Exportă DXF"

#: App_Main.py:7369 App_Main.py:7372
msgid "Import SVG"
msgstr "Importă SVG"

#: App_Main.py:7400 App_Main.py:7404
msgid "Import DXF"
msgstr "Importa DXF"

#: App_Main.py:7454
msgid "Viewing the source code of the selected object."
msgstr "Vizualizarea codului sursă a obiectului selectat."

#: App_Main.py:7461 App_Main.py:7465
msgid "Select an Gerber or Excellon file to view it's source file."
msgstr "Selectati un obiect Gerber sau Excellon pentru a-i vedea codul sursa."

#: App_Main.py:7479
msgid "Source Editor"
msgstr "Editor Cod Sursă"

#: App_Main.py:7519 App_Main.py:7526
msgid "There is no selected object for which to see it's source file code."
msgstr "Nici-un obiect selectat pentru a-i vedea codul sursa."

#: App_Main.py:7538
msgid "Failed to load the source code for the selected object"
msgstr "Codul sursă pentru obiectul selectat nu a putut fi încărcat"

#: App_Main.py:7574
msgid "Go to Line ..."
msgstr "Mergi la Linia ..."

#: App_Main.py:7575
msgid "Line:"
msgstr "Linia:"

#: App_Main.py:7602
msgid "New TCL script file created in Code Editor."
msgstr "Un nou script TCL a fost creat in Editorul de cod."

#: App_Main.py:7638 App_Main.py:7640 App_Main.py:7676 App_Main.py:7678
msgid "Open TCL script"
msgstr "Încarcă TCL script"

#: App_Main.py:7706
msgid "Executing ScriptObject file."
msgstr "Se executa un fisier script FlatCAM."

#: App_Main.py:7714 App_Main.py:7717
msgid "Run TCL script"
msgstr "Ruleaza TCL script"

#: App_Main.py:7740
msgid "TCL script file opened in Code Editor and executed."
msgstr "Un fisier script TCL a fost deschis in Editorul de cod si executat."

#: App_Main.py:7791 App_Main.py:7797
msgid "Save Project As ..."
msgstr "Salvează Proiectul ca ..."

#: App_Main.py:7832
msgid "FlatCAM objects print"
msgstr "Tipărirea obiectelor FlatCAM"

#: App_Main.py:7845 App_Main.py:7852
msgid "Save Object as PDF ..."
msgstr "Salvați obiectul în format PDF ..."

#: App_Main.py:7861
msgid "Printing PDF ... Please wait."
msgstr "Se tipărește PDF ... Vă rugăm să așteptați."

#: App_Main.py:8040
msgid "PDF file saved to"
msgstr "Fișierul PDF salvat în"

#: App_Main.py:8065
msgid "Exporting SVG"
msgstr "SVG in curs de export"

#: App_Main.py:8108
msgid "SVG file exported to"
msgstr "Fişier SVG exportat in"

#: App_Main.py:8134
msgid ""
"Save cancelled because source file is empty. Try to export the Gerber file."
msgstr ""
"Salvare anulată deoarece fișierul sursă este gol. Încercați să exportați "
"fișierul Gerber."

#: App_Main.py:8281
msgid "Excellon file exported to"
msgstr "Fişierul Excellon exportat in"

#: App_Main.py:8290
msgid "Exporting Excellon"
msgstr "Excellon in curs de export"

#: App_Main.py:8295 App_Main.py:8302
msgid "Could not export Excellon file."
msgstr "Fişierul Excellon nu a fost posibil să fie exportat."

#: App_Main.py:8417
msgid "Gerber file exported to"
msgstr "Fişier Gerber exportat in"

#: App_Main.py:8425
msgid "Exporting Gerber"
msgstr "Gerber in curs de export"

#: App_Main.py:8430 App_Main.py:8437
msgid "Could not export Gerber file."
msgstr "Fişierul Gerber nu a fost posibil să fie exportat."

#: App_Main.py:8472
msgid "DXF file exported to"
msgstr "Fişierul DXF exportat in"

#: App_Main.py:8478
msgid "Exporting DXF"
msgstr "DXF in curs de export"

#: App_Main.py:8483 App_Main.py:8490
msgid "Could not export DXF file."
msgstr "Fişierul DXF nu a fost posibil să fie exportat."

#: App_Main.py:8524
msgid "Importing SVG"
msgstr "SVG in curs de ia fi importat"

#: App_Main.py:8532 App_Main.py:8578
msgid "Import failed."
msgstr "Importul a eșuat."

#: App_Main.py:8570
msgid "Importing DXF"
msgstr "DXF in curs de a fi importat"

#: App_Main.py:8611 App_Main.py:8806 App_Main.py:8871
msgid "Failed to open file"
msgstr "Eşec in incărcarea fişierului"

#: App_Main.py:8614 App_Main.py:8809 App_Main.py:8874
msgid "Failed to parse file"
msgstr "Parsarea fişierului a eșuat"

#: App_Main.py:8626
msgid "Object is not Gerber file or empty. Aborting object creation."
msgstr ""
"Obiectul nu estetip Gerber sau este gol. Se anulează crearea obiectului."

#: App_Main.py:8631
msgid "Opening Gerber"
msgstr "Gerber in curs de incărcare"

#: App_Main.py:8642
msgid "Open Gerber failed. Probable not a Gerber file."
msgstr "Incărcarea Gerber a eșuat. Probabil că nu este un fișier Gerber."

#: App_Main.py:8678
msgid "Cannot open file"
msgstr "Nu se poate incărca fişierul"

#: App_Main.py:8699
msgid "Opening Excellon."
msgstr "Excellon in curs de incărcare."

#: App_Main.py:8709
msgid "Open Excellon file failed. Probable not an Excellon file."
msgstr "Incărcarea Excellon a eșuat. Probabil nu este de tip Excellon."

#: App_Main.py:8741
msgid "Reading GCode file"
msgstr "Se citeşte un fişier G-Code"

#: App_Main.py:8754
msgid "This is not GCODE"
msgstr "Acest obiect nu este de tip GCode"

#: App_Main.py:8759
msgid "Opening G-Code."
msgstr "G-Code in curs de incărcare."

#: App_Main.py:8772
msgid ""
"Failed to create CNCJob Object. Probable not a GCode file. Try to load it "
"from File menu.\n"
" Attempting to create a FlatCAM CNCJob Object from G-Code file failed during "
"processing"
msgstr ""
"Eşec in crearea unui obiect CNCJob. Probabil nu este un fişier GCode. "
"Încercați să-l încărcați din meniul Fișier. \n"
"Incercarea de a crea un obiect CNCJob din G-Code a eșuat in timpul procesarii"

#: App_Main.py:8828
msgid "Object is not HPGL2 file or empty. Aborting object creation."
msgstr ""
"Obiectul nu este fișier HPGL2 sau este gol. Se renunta la crearea obiectului."

#: App_Main.py:8833
msgid "Opening HPGL2"
msgstr "HPGL2 in curs de incărcare"

#: App_Main.py:8840
msgid " Open HPGL2 failed. Probable not a HPGL2 file."
msgstr " Incărcarea HPGL2 a eșuat. Probabil nu este de tip HPGL2 ."

#: App_Main.py:8866
msgid "TCL script file opened in Code Editor."
msgstr "S-a încărcat un script TCL în Editorul Cod."

#: App_Main.py:8886
msgid "Opening TCL Script..."
msgstr "Încarcă TCL script..."

#: App_Main.py:8897
msgid "Failed to open TCL Script."
msgstr "Eşec in incărcarea fişierului TCL."

#: App_Main.py:8919
msgid "Opening FlatCAM Config file."
msgstr "Se incarca un fişier FlatCAM de configurare."

#: App_Main.py:8947
msgid "Failed to open config file"
msgstr "Eşec in incărcarea fişierului de configurare"

#: App_Main.py:8976
msgid "Loading Project ... Please Wait ..."
msgstr "Se încarcă proiectul ... Vă rugăm să așteptați ..."

#: App_Main.py:8981
msgid "Opening FlatCAM Project file."
msgstr "Se incarca un fisier proiect FlatCAM."

#: App_Main.py:8996 App_Main.py:9000 App_Main.py:9017
msgid "Failed to open project file"
msgstr "Eşec in incărcarea fişierului proiect"

#: App_Main.py:9054
msgid "Loading Project ... restoring"
msgstr "Se încarcă proiectul ... se restabileste"

#: App_Main.py:9064
msgid "Project loaded from"
msgstr "Proiectul a fost incărcat din"

#: App_Main.py:9090
msgid "Redrawing all objects"
msgstr "Toate obiectele sunt reafisate"

#: App_Main.py:9178
msgid "Failed to load recent item list."
msgstr "Eşec in incărcarea listei cu fişiere recente."

#: App_Main.py:9185
msgid "Failed to parse recent item list."
msgstr "Eşec in parsarea listei cu fişiere recente."

#: App_Main.py:9195
msgid "Failed to load recent projects item list."
msgstr "Eşec in incărcarea listei cu proiecte recente."

#: App_Main.py:9202
msgid "Failed to parse recent project item list."
msgstr "Eşec in parsarea listei cu proiecte recente."

#: App_Main.py:9263
msgid "Clear Recent projects"
msgstr "Sterge Proiectele recente"

#: App_Main.py:9287
msgid "Clear Recent files"
msgstr "Sterge fişierele recente"

#: App_Main.py:9389
msgid "Selected Tab - Choose an Item from Project Tab"
msgstr "Tab-ul Selectat - Alege un obiect din Tab-ul Proiect"

#: App_Main.py:9390
msgid "Details"
msgstr "Detalii"

#: App_Main.py:9392
msgid "The normal flow when working in FlatCAM is the following:"
msgstr "Fluxul normal cand se lucreaza in FlatCAM este urmatorul:"

#: App_Main.py:9393
#, fuzzy
#| msgid ""
#| "Load/Import a Gerber, Excellon, Gcode, DXF, Raster Image or SVG file into "
#| "FlatCAM using either the toolbars, key shortcuts or even dragging and "
#| "dropping the files on the GUI."
msgid ""
"Load/Import a Gerber, Excellon, Gcode, DXF, Raster Image or SVG file into "
"FlatCAM using either the toolbars, key shortcuts or even dragging and "
"dropping the files on the AppGUI."
msgstr ""
"Încărcați / importați un fișier Gerber, Excellon, Gcode, DXF, Raster Image "
"sau SVG în FlatCAM utilizând fie barele de instrumente, combinatii de taste "
"sau chiar tragând fișierele în GUI."

#: App_Main.py:9396
#, fuzzy
#| msgid ""
#| "You can also load a FlatCAM project by double clicking on the project "
#| "file, drag and drop of the file into the FLATCAM GUI or through the menu "
#| "(or toolbar) actions offered within the app."
msgid ""
"You can also load a FlatCAM project by double clicking on the project file, "
"drag and drop of the file into the FLATCAM AppGUI or through the menu (or "
"toolbar) actions offered within the app."
msgstr ""
"De asemenea, puteți încărca un proiect FlatCAM făcând dublu clic pe fișierul "
"proiectului, tragând fișierul în fereastra FLATCAM sau prin icon-urile din "
"meniu (sau din bara de instrumente) oferite în aplicație."

#: App_Main.py:9399
msgid ""
"Once an object is available in the Project Tab, by selecting it and then "
"focusing on SELECTED TAB (more simpler is to double click the object name in "
"the Project Tab, SELECTED TAB will be updated with the object properties "
"according to its kind: Gerber, Excellon, Geometry or CNCJob object."
msgstr ""
"Odată ce un obiect este disponibil în fila Proiect, selectându-l și apoi "
"concentrându-vă pe fila SELECTAT (mai simplu este să faceți dublu clic pe "
"numele obiectului din fila Proiect, fila SELECTAT va fi actualizată cu "
"proprietățile obiectului în funcție de tipul său: Gerber, Excellon, "
"Geometrie sau obiect CNCJob."

#: App_Main.py:9403
msgid ""
"If the selection of the object is done on the canvas by single click "
"instead, and the SELECTED TAB is in focus, again the object properties will "
"be displayed into the Selected Tab. Alternatively, double clicking on the "
"object on the canvas will bring the SELECTED TAB and populate it even if it "
"was out of focus."
msgstr ""
"Dacă în schimb selecția obiectului se face pe un singur clic, iar fila "
"SELECTAT este în centrul atenției, din nou proprietățile obiectului vor fi "
"afișate în fila SELECTAT. În mod alternativ, facand dublu clic pe obiectul "
"de pe ecran va aduce fila SELECTAT și o va popula chiar dacă nu a fost in "
"focus."

#: App_Main.py:9407
msgid ""
"You can change the parameters in this screen and the flow direction is like "
"this:"
msgstr ""
"Se pot schimba parametrii in acest ecran si directia de executive este asa:"

#: App_Main.py:9408
msgid ""
"Gerber/Excellon Object --> Change Parameter --> Generate Geometry --> "
"Geometry Object --> Add tools (change param in Selected Tab) --> Generate "
"CNCJob --> CNCJob Object --> Verify GCode (through Edit CNC Code) and/or "
"append/prepend to GCode (again, done in SELECTED TAB) --> Save GCode."
msgstr ""
"Obiect Gerber / Excellon -> Modificare parametru -> Generare geometrie -> "
"Obiect Geometrie -> Adăugare unelte (modifica parametru în fila SELECTAT) -> "
"Generare CNCJob -> Obiect CNCJob -> Verificare G-code (prin Editați codul "
"CNC) și / sau adăugați in fata / la final codul G-code (din nou, efectuat în "
"fila SELECȚIONATĂ) -> Salvați codul G-code."

#: App_Main.py:9412
msgid ""
"A list of key shortcuts is available through an menu entry in Help --> "
"Shortcuts List or through its own key shortcut: <b>F3</b>."
msgstr ""
"O listă de comenzi rapide de chei este disponibilă printr-o optiune din "
"meniul Ajutor -> Lista de combinatii taste sau prin propria tasta asociata: "
"<b>F3</b>."

#: App_Main.py:9476
msgid "Failed checking for latest version. Could not connect."
msgstr ""
"Verificarea pentru ultima versiune a eșuat. Nu a fost posibilă conectarea la "
"server."

#: App_Main.py:9483
msgid "Could not parse information about latest version."
msgstr "Informatia cu privire la ultima versiune nu s-a putut interpreta."

#: App_Main.py:9493
msgid "FlatCAM is up to date!"
msgstr "FlatCAM este la ultima versiune!"

#: App_Main.py:9498
msgid "Newer Version Available"
msgstr "O nouă versiune este disponibila"

#: App_Main.py:9500
msgid "There is a newer version of FlatCAM available for download:"
msgstr "O nouă versiune de FlatCAM este disponibilă pentru download:"

#: App_Main.py:9504
msgid "info"
msgstr "informaţie"

#: App_Main.py:9532
msgid ""
"OpenGL canvas initialization failed. HW or HW configuration not supported."
"Change the graphic engine to Legacy(2D) in Edit -> Preferences -> General "
"tab.\n"
"\n"
msgstr ""
"Iniţializarea motorului grafic OpenGL a eşuat. HW sau configurarea HW nu "
"este acceptat(ă). Schimbă motorul grafic in Legacy(2D) in Editare -> "
"Preferinţe -> General\n"
"\n"

#: App_Main.py:9610
msgid "All plots disabled."
msgstr "Toate afişările sunt dezactivate."

#: App_Main.py:9617
msgid "All non selected plots disabled."
msgstr "Toate afişările care nu sunt selectate sunt dezactivate."

#: App_Main.py:9624
msgid "All plots enabled."
msgstr "Toate afişările sunt activate."

#: App_Main.py:9630
msgid "Selected plots enabled..."
msgstr "Toate afişările selectate sunt activate..."

#: App_Main.py:9638
msgid "Selected plots disabled..."
msgstr "Toate afişările selectate sunt dezactivate..."

#: App_Main.py:9671
msgid "Enabling plots ..."
msgstr "Activează Afișare ..."

#: App_Main.py:9720
msgid "Disabling plots ..."
msgstr "Dezactivează Afișare ..."

#: App_Main.py:9743
msgid "Working ..."
msgstr "Se lucrează..."

#: App_Main.py:9852
msgid "Set alpha level ..."
msgstr "Setează transparenta ..."

#: App_Main.py:9906
msgid "Saving FlatCAM Project"
msgstr "Proiectul FlatCAM este in curs de salvare"

#: App_Main.py:9927 App_Main.py:9963
msgid "Project saved to"
msgstr "Proiectul s-a salvat in"

#: App_Main.py:9934
msgid "The object is used by another application."
msgstr "Obiectul este folosit de o altă aplicație."

#: App_Main.py:9948
msgid "Failed to verify project file"
msgstr "Eşec in incărcarea fişierului proiect"

#: App_Main.py:9948 App_Main.py:9956 App_Main.py:9966
msgid "Retry to save it."
msgstr "Încercați din nou pentru a-l salva."

#: App_Main.py:9956 App_Main.py:9966
msgid "Failed to parse saved project file"
msgstr "Esec in analizarea fişierului Proiect"

#: Bookmark.py:57 Bookmark.py:84
msgid "Title"
msgstr "Titlu"

#: Bookmark.py:58 Bookmark.py:88
msgid "Web Link"
msgstr "Website"

#: Bookmark.py:62
msgid ""
"Index.\n"
"The rows in gray color will populate the Bookmarks menu.\n"
"The number of gray colored rows is set in Preferences."
msgstr ""
"Index.\n"
"Rândurile în culoare gri vor fi adăugate in meniul de Bookmarks.\n"
"Numărul de rânduri colorate gri este setat în Preferințe."

#: Bookmark.py:66
msgid ""
"Description of the link that is set as an menu action.\n"
"Try to keep it short because it is installed as a menu item."
msgstr ""
"Descrierea Website care este setată ca acțiune de meniu.\n"
"Încercați să o mențineți scurtă, deoarece este instalată ca element de meniu."

#: Bookmark.py:69
msgid "Web Link. E.g: https://your_website.org "
msgstr "Website. De ex: https://your_website.org "

#: Bookmark.py:78
msgid "New Bookmark"
msgstr "Bookmark Nou"

#: Bookmark.py:97
msgid "Add Entry"
msgstr "Adaugă Intrare"

#: Bookmark.py:98
msgid "Remove Entry"
msgstr "Elimina Intrare"

#: Bookmark.py:99
msgid "Export List"
msgstr "Exportă lista"

#: Bookmark.py:100
msgid "Import List"
msgstr "Importă lista"

#: Bookmark.py:190
msgid "Title entry is empty."
msgstr "Caseta de introducere Titlu este goală."

#: Bookmark.py:199
msgid "Web link entry is empty."
msgstr "Caseta de introducere a link-ului web este goală."

#: Bookmark.py:207
msgid "Either the Title or the Weblink already in the table."
msgstr "Fie Titlul, fie Weblink-ul deja sunt in tabel."

#: Bookmark.py:227
msgid "Bookmark added."
msgstr "Bookmark adăugat."

#: Bookmark.py:244
msgid "This bookmark can not be removed"
msgstr "Acest bookmark nu poate fi eliminat"

#: Bookmark.py:275
msgid "Bookmark removed."
msgstr "Bookmark-ul a fost eliminat."

#: Bookmark.py:290
msgid "Export FlatCAM Bookmarks"
msgstr "Exportați bookmark-urile FlatCAM"

#: Bookmark.py:319 Bookmark.py:349
msgid "Could not load bookmarks file."
msgstr "Nu am putut incărca fişierul cu bookmark-uri."

#: Bookmark.py:329
msgid "Failed to write bookmarks to file."
msgstr "Salvarea bookmark-urilor intr-un fişier a eșuat."

#: Bookmark.py:331
msgid "Exported bookmarks to"
msgstr "Exportă Bookmark-uri in"

#: Bookmark.py:337
msgid "Import FlatCAM Bookmarks"
msgstr "Importă Bookmark-uri FlatCAM"

#: Bookmark.py:356
msgid "Imported Bookmarks from"
msgstr "Bookmark-uri au fost importate din"

#: Common.py:37
msgid "The user requested a graceful exit of the current task."
msgstr "Utilizatorul a solicitat o inchidere grațioasă a taskului curent."

#: Common.py:250
msgid "Click the end point of the area."
msgstr "Faceți clic pe punctul final al zonei."

#: Common.py:386
msgid "Exclusion areas added. Checking overlap with the object geometry ..."
msgstr ""

#: Common.py:392
msgid "Failed. Exclusion areas intersects the object geometry ..."
msgstr ""

#: Common.py:396
#, fuzzy
#| msgid "Exclusion areas"
msgid "Exclusion areas added."
msgstr "Zone de Excludere"

#: Common.py:405
#, fuzzy
#| msgid "Exclusion areas"
msgid "With Exclusion areas."
msgstr "Zone de Excludere"

#: Common.py:435
msgid "Cancelled. Area exclusion drawing was interrupted."
msgstr "Anulat. Desenarea Zonei de Excludere a fost întreruptă."

#: Common.py:527 Common.py:575
#, fuzzy
#| msgid "All objects are selected."
msgid "All exclusion zones deleted."
msgstr "Totate obiectele sunt selectate."

#: Common.py:562
#, fuzzy
#| msgid "Delete all exclusion areas."
msgid "Selected exclusion zones deleted."
msgstr ""
"Ștergeți toate zonele de excludere.Ștergeți toate extensiile din listă."

#: assets/linux/flatcam-beta.desktop:3
msgid "FlatCAM Beta"
msgstr "FlatCAM Beta"

#: assets/linux/flatcam-beta.desktop:8
msgid "G-Code from GERBERS"
msgstr "G-Code din GERBERS"

#: camlib.py:596
msgid "self.solid_geometry is neither BaseGeometry or list."
msgstr "self.solid_geometry nu este tip BaseGeometry sau tip listă."

#: camlib.py:971
msgid "Pass"
msgstr "Treceri"

#: camlib.py:991
msgid "Get Exteriors"
msgstr "Obtine Exterior"

#: camlib.py:994
msgid "Get Interiors"
msgstr "Obtine Interioare"

#: camlib.py:2174
msgid "Object was mirrored"
msgstr "Obiectul a fost oglindit"

#: camlib.py:2176
msgid "Failed to mirror. No object selected"
msgstr "Oglindire eșuată. Nici-un obiect nu este selectat"

#: camlib.py:2241
msgid "Object was rotated"
msgstr "Obiectul a fost rotit"

#: camlib.py:2243
msgid "Failed to rotate. No object selected"
msgstr "Rotaţie eșuată. Nici-un obiect nu este selectat"

#: camlib.py:2309
msgid "Object was skewed"
msgstr "Obiectul a fost deformat"

#: camlib.py:2311
msgid "Failed to skew. No object selected"
msgstr "Deformare eșuată. Nici-un obiect nu este selectat"

#: camlib.py:2387
msgid "Object was buffered"
msgstr "Obiectul a fost tamponat"

#: camlib.py:2389
msgid "Failed to buffer. No object selected"
msgstr "Eroare in a face buffer. Nu a fost selectat niciun obiect"

#: camlib.py:2597
msgid "There is no such parameter"
msgstr "Nu exista un asemenea parametru"

#: camlib.py:2657 camlib.py:2898 camlib.py:3127 camlib.py:3349
msgid ""
"The Cut Z parameter has positive value. It is the depth value to drill into "
"material.\n"
"The Cut Z parameter needs to have a negative value, assuming it is a typo "
"therefore the app will convert the value to negative. Check the resulting "
"CNC code (Gcode etc)."
msgstr ""
"Parametrul >Z tăiere< are o valoare pozitivă. Reprezinta adâncimea de tăiere "
"in material prin urmare poate fi numai negativ.\n"
"Se presupune că este o eroare de tastare astfel ca aplicaţia va converti "
"intr-o valoare negativă. Verifică codul masina (G-Code etc) rezultat."

#: camlib.py:2665 camlib.py:2908 camlib.py:3137 camlib.py:3359 camlib.py:3650
#: camlib.py:4045
msgid "The Cut Z parameter is zero. There will be no cut, skipping file"
msgstr ""
"Parametrul >Z tăiere< este nul. Nu va fi nici-o tăiere prin urmare nu "
"procesam fişierul"

#: camlib.py:2680 camlib.py:4013
msgid ""
"The Toolchange X,Y field in Edit -> Preferences has to be in the format (x, "
"y) \n"
"but now there is only one value, not two. "
msgstr ""
"Parametrul >Schimbare Unealtă X, Y< in Editare -> Peferințe trebuie să fie "
"in formatul (x, y) \n"
"dar are o singură valoare in loc de doua. "

#: camlib.py:2693 camlib.py:3597 camlib.py:3991
msgid ""
"The End Move X,Y field in Edit -> Preferences has to be in the format (x, y) "
"but now there is only one value, not two."
msgstr ""
"Parametrul >Schimbare Unealtă X, Y< in Editare -> Peferințe trebuie să fie "
"in formatul (x, y) dar are o singură valoare in loc de două."

#: camlib.py:2781
msgid "Creating a list of points to drill..."
msgstr "Crearea unei liste de puncte pentru găurire ..."

#: camlib.py:2871 camlib.py:3748 camlib.py:4149
msgid "Starting G-Code"
msgstr "Începând G-Code"

#: camlib.py:3012 camlib.py:3231 camlib.py:3395 camlib.py:3761 camlib.py:4160
msgid "Starting G-Code for tool with diameter"
msgstr "Pornirea codului G pentru scula cu diametrul"

#: camlib.py:3095 camlib.py:3313 camlib.py:3481
msgid "G91 coordinates not implemented"
msgstr "Coordonatele G91 nu au fost implementate"

#: camlib.py:3101 camlib.py:3320 camlib.py:3486
msgid "The loaded Excellon file has no drills"
msgstr "Fişierul Excellon incărcat nu are găuri"

#: camlib.py:3509
msgid "Finished G-Code generation..."
msgstr "Generarea G-Code finalizata ..."

#: camlib.py:3619
msgid ""
"The Toolchange X,Y field in Edit -> Preferences has to be in the format (x, "
"y) \n"
"but now there is only one value, not two."
msgstr ""
"Parametrul >Schimbare Unealtă X, Y< in Editare -> Peferințe trebuie să fie "
"in formatul (x, y) \n"
"dar are o singură valoare in loc de doua."

#: camlib.py:3633 camlib.py:4028
msgid ""
"Cut_Z parameter is None or zero. Most likely a bad combinations of other "
"parameters."
msgstr ""
"Parametrul >Z tăiere< este None sau zero. Cel mai probabil o combinaţie "
"nefericita de parametri."

#: camlib.py:3642 camlib.py:4037
msgid ""
"The Cut Z parameter has positive value. It is the depth value to cut into "
"material.\n"
"The Cut Z parameter needs to have a negative value, assuming it is a typo "
"therefore the app will convert the value to negative.Check the resulting CNC "
"code (Gcode etc)."
msgstr ""
"Parametrul >Z tăiere< are o valoare pozitivă. Reprezinta adâncimea de tăiere "
"in material prin urmare poate fi numai negativ.\n"
"Se presupune că este o eroare de tastare astfel ca aplicaţia va converti "
"intr-o valoare negativă. Verifică codul masina (G-Code etc) rezultat."

#: camlib.py:3655 camlib.py:4051
msgid "Travel Z parameter is None or zero."
msgstr "Parametrul >Z deplasare< este None sau zero."

#: camlib.py:3660 camlib.py:4056
msgid ""
"The Travel Z parameter has negative value. It is the height value to travel "
"between cuts.\n"
"The Z Travel parameter needs to have a positive value, assuming it is a typo "
"therefore the app will convert the value to positive.Check the resulting CNC "
"code (Gcode etc)."
msgstr ""
"Parametrul >Z deplasare< are o valoare negativă. Reprezinta Înălţimea la "
"care unealtă se deplasează fără să taie prin urmare poate fi numai pozitiv.\n"
"Se presupune că este o eroare de tastare astfel ca aplicaţia va converti "
"intr-o valoare pozitivă. Verifică codul masina (G-Code etc) rezultat."

#: camlib.py:3668 camlib.py:4064
msgid "The Z Travel parameter is zero. This is dangerous, skipping file"
msgstr ""
"Parametrul >Z deplasare< este zero. Aceasta este periculos, prin urmare nu "
"se procesează fişierul"

#: camlib.py:3687 camlib.py:4087
msgid "Indexing geometry before generating G-Code..."
msgstr "Geometria se indexeaza înainte de a genera G-Code..."

#: camlib.py:3831 camlib.py:4229
msgid "Finished G-Code generation"
msgstr "Generarea G-Code terminată"

#: camlib.py:3831
msgid "paths traced"
msgstr "căi trasate"

#: camlib.py:3881
msgid "Expected a Geometry, got"
msgstr "Se astepta o Geometrie, am primit in schimb"

#: camlib.py:3888
msgid ""
"Trying to generate a CNC Job from a Geometry object without solid_geometry."
msgstr ""
"Se încearcă generarea unui CNC Job dintr-un obiect Geometrie fără atributul "
"solid_geometry."

#: camlib.py:3929
msgid ""
"The Tool Offset value is too negative to use for the current_geometry.\n"
"Raise the value (in module) and try again."
msgstr ""
"Valoarea pentru >Offset unealtă< este prea negativă pentru a fi folosita. pt "
"current_geometry \n"
"Mareste valoarea absoluta și încearcă din nou."

#: camlib.py:4229
msgid " paths traced."
msgstr " căi trasate."

#: camlib.py:4257
msgid "There is no tool data in the SolderPaste geometry."
msgstr "Nu există date cu privire la unealtă in Geometria SolderPaste."

#: camlib.py:4346
msgid "Finished SolderPaste G-Code generation"
msgstr "Generarea G-Code SolderPaste s-a terminat"

#: camlib.py:4346
msgid "paths traced."
msgstr "căi trasate."

#: camlib.py:4606
msgid "Parsing GCode file. Number of lines"
msgstr "Analizând fișierul GCode. Numărul de linii"

#: camlib.py:4713
msgid "Creating Geometry from the parsed GCode file. "
msgstr "Crează un obiect tip Geometrie din fisierul GCode analizat. "

#: camlib.py:4856 camlib.py:5079 camlib.py:5190 camlib.py:5346
msgid "G91 coordinates not implemented ..."
msgstr "Coordonatele G91 nu au fost implementate ..."

#: camlib.py:4921
msgid "Unifying Geometry from parsed Geometry segments"
msgstr "Se unifica Geometria din segmentele de Geometrie parsate"

#: defaults.py:756
msgid "Could not load defaults file."
msgstr "Nu am putut incărca fişierul cu valori default."

#: defaults.py:769
msgid "Failed to parse defaults file."
msgstr "Parsarea fişierului cu valori default a eșuat."

#: tclCommands/TclCommandBbox.py:75 tclCommands/TclCommandNregions.py:74
msgid "Expected GerberObject or GeometryObject, got"
msgstr "Se astepta un obiect GerberObject sau GeometryObject, s-a primit"

#: tclCommands/TclCommandBounds.py:67 tclCommands/TclCommandBounds.py:71
msgid "Expected a list of objects names separated by comma. Got"
msgstr ""
"Se aștepta o listă de nume de obiecte separate prin virgulă. S-au primit"

#: tclCommands/TclCommandBounds.py:81
msgid "TclCommand Bounds done."
msgstr "TclCommand Bounds executata."

#: tclCommands/TclCommandCopperClear.py:281 tclCommands/TclCommandPaint.py:283
#: tclCommands/TclCommandScale.py:81
msgid "Could not retrieve box object"
msgstr "Nu s-a putut incărca obiectul"

#: tclCommands/TclCommandCopperClear.py:304
msgid "Expected either -box <value> or -all."
msgstr "Asteptăm -box <value> sau -all."

#: tclCommands/TclCommandGeoCutout.py:147
msgid ""
"The name of the object for which cutout is done is missing. Add it and retry."
msgstr ""
"Numele obiectului pentru care se efectuează tăierea lipseste. Adaugă din nou "
"și reîncearcă."

#: tclCommands/TclCommandGeoCutout.py:189
msgid "Gaps value can be only one of: 'lr', 'tb', '2lr', '2tb', 4 or 8."
msgstr ""
"Valoarea spatiilor poate fi doar una dintre: „Niciuna”, „lr”, „tb”, „2lr”, "
"„2tb”, 4 sau 8."

#: tclCommands/TclCommandGeoCutout.py:301
#: tclCommands/TclCommandGeoCutout.py:356
msgid "Any-form Cutout operation finished."
msgstr "Operatia de tăiere cu formă liberă s-a terminat."

#: tclCommands/TclCommandGeoCutout.py:362
msgid "Cancelled. Object type is not supported."
msgstr "Anulat. Tipul de obiect nu este acceptat."

#: tclCommands/TclCommandHelp.py:75
msgid "Available commands:"
msgstr "Comenzi disponibile:"

#: tclCommands/TclCommandHelp.py:115
msgid "Type help <command_name> for usage."
msgstr "Introduceți help <nume_comanda> pentru utilizare."

#: tclCommands/TclCommandHelp.py:115
msgid "Example: help open_gerber"
msgstr "Exemplu: help open_gerber"

#: tclCommands/TclCommandPaint.py:250 tclCommands/TclCommandPaint.py:256
msgid "Expected a tuple value like -single 3.2,0.1."
msgstr ""

#: tclCommands/TclCommandPaint.py:276
msgid "Expected -box <value>."
msgstr "Asteptăm -box <value>."

#: tclCommands/TclCommandPaint.py:297
msgid ""
"None of the following args: 'box', 'single', 'all' were used.\n"
"Paint failed."
msgstr ""
"Nu s-a folosit niciunul din următoarele argumente: „box”, „single”, „all”.\n"
"Pictura nu a reușit."

#: tclCommands/TclCommandScale.py:106
msgid ""
"Expected -origin <origin> or -origin <min_bounds> or -origin <center> or - "
"origin 3.0,4.2."
msgstr ""
"Asteptam -origin <origin> sau -origin <min_bounds> sau -origin <center> or -"
"origin 3.0,4.2."

#: tclCommands/TclCommandScale.py:119
msgid "Expected -x <value> -y <value>."
msgstr "Asteptam -x <value> -y <value>."

#: tclCommands/TclCommandSetOrigin.py:95
msgid "Expected a pair of (x, y) coordinates. Got"
msgstr "Se așteaptă o pereche de coordonate (x, y). S-au primit"

#: tclCommands/TclCommandSetOrigin.py:101
msgid "Origin set by offsetting all loaded objects with "
msgstr "Originea setată prin ofsetarea tuturor obiectelor încărcate cu "

#: tclCommands/TclCommandSubtractRectangle.py:62
msgid "No Geometry name in args. Provide a name and try again."
msgstr ""
"Nici-un nume de Geometrie in argumente. Furnizați un nume și încercați din "
"nou."

#~ msgid "./assets/icon.png"
#~ msgstr "./assets/icon.png"

#~ msgid "New Blank Geometry"
#~ msgstr "Geometrie Noua (goală)"

#~ msgid "New Blank Gerber"
#~ msgstr "Gerber Nou (gol)"

#~ msgid "New Blank Excellon"
#~ msgstr "Excellon nou (gol)"

#~ msgid ""
#~ "Relative measurement.\n"
#~ "Reference is last click position"
#~ msgstr ""
#~ "Măsurătoare relativă.\n"
#~ "Referința este poziţia ultimului click pe canvas"

#~ msgid "Clear areas"
#~ msgstr "Ștergeți Zonele"

#~ msgid "Apply Theme"
#~ msgstr "Aplicați Tema"

#~ msgid ""
#~ "Select a theme for FlatCAM.\n"
#~ "It will theme the plot area.\n"
#~ "The application will restart after change."
#~ msgstr ""
#~ "Selectați o Temă pentru FlatCAM.\n"
#~ "Va afecta zona de afisare.\n"
#~ "Aplicația va reporni după modificare."

#~ msgid "Film Object"
#~ msgstr "Obiect Film"

#~ msgid "Object for which to create the film."
#~ msgstr "Obiectul pt care se crează filmul."

#~ msgid "Box Object"
#~ msgstr "Container"

#~ msgid ""
#~ "The actual object that is used as container for the\n"
#~ " selected object for which we create the film.\n"
#~ "Usually it is the PCB outline but it can be also the\n"
#~ "same object for which the film is created."
#~ msgstr ""
#~ "Obiectul care este folosit ca și container pentru crearea filmului.\n"
#~ "De obicei este conturul PCB dar se poate folosi și obiectul pt care\n"
#~ "se crează filmul."

#~ msgid "Expected -x <value> and -y <value>."
#~ msgstr "Asteptam -x <value> si -y <value>."

#~ msgid "Could not load factory defaults file."
#~ msgstr ""
#~ "Fişierul cu valori default de fabrică nu a fost posibil să fie deschis."

#~ msgid "Failed to parse factory defaults file."
#~ msgstr "Parsarea fişierului cu valori default de fabrică  a eșuat."

#~ msgid "Could not load preferences file."
#~ msgstr "Nu am putut incărca fişierul cu valori default."

#~ msgid "Failed to write factory defaults to file."
#~ msgstr ""
#~ "Salvarea fişierului cu valori default de fabrică intr-un fişier a eșuat."

#~ msgid "Factory defaults saved."
#~ msgstr "Valori default de fabrică au fost salvate."

#~ msgid ""
#~ "The Tool Type (TT) can be:<BR>- <B>Circular</B> with 1 ... 4 teeth -> it "
#~ "is informative only. Being circular, <BR>the cut width in material is "
#~ "exactly the tool diameter.<BR>- <B>Ball</B> -> informative only and make "
#~ "reference to the Ball type endmill.<BR>- <B>V-Shape</B> -> it will "
#~ "disable de Z-Cut parameter in the resulting geometry UI form and enable "
#~ "two additional UI form fields in the resulting geometry: V-Tip Dia and V-"
#~ "Tip Angle. Adjusting those two values will adjust the Z-Cut parameter "
#~ "such as the cut width into material will be equal with the value in the "
#~ "Tool Diameter column of this table.<BR>Choosing the <B>V-Shape</B> Tool "
#~ "Type automatically will select the Operation Type in the resulting "
#~ "geometry as Isolation."
#~ msgstr ""
#~ "Tipul uneltei (TU) poate fi::<BR>- <B>Circular</B> cu 1 ... 4 dinti -> "
#~ "doar informativ. prin forma sa circulara, <BR>lăţimea de tăiere este tot "
#~ "una cu diametrul sau<BR>- <B>Bila</B> -> informativ și face referire la "
#~ "frezele cu cap rotund.<BR>- <B>V-Shape</B> -> va dezactiva parametrul >Z "
#~ "tăiere< deoarece acesta este acum calculat și va afisa 2 noi parametri in "
#~ "UI: V_dia și V_unghi. Ajustarea acestor parametri va modifica param. "
#~ "calculat >Z tăiere< a.i lăţimea de tăiere in material va fi egală cu "
#~ "valoarea >Dia unealtă< din coloana tabelei de Unelte.<BR>Alegerea tipului "
#~ "<B>V-Shape</B> va selecta automat Tipul Operaţiei ca fiind Izolare."

#~ msgid "e_fr_probe"
#~ msgstr "e_fr_probe"

#~ msgid ""
#~ " Could not generate punched hole Gerber because the punch hole sizeis "
#~ "bigger than some of the apertures in the Gerber object."
#~ msgstr ""
#~ " Nu a putut genera un obiect Gerber cu găuri punctate, deoarece "
#~ "dimensiunea găurii de perforare este mai mare decât unele dintre "
#~ "aperturile din obiectul Gerber."

#~ msgid "Paint Tool. Normal painting all task started."
#~ msgstr "Unealta Paint. Taskul de pictare a tuturor poligoanelor a inceput."

#~ msgid "Rest machining painting all task started."
#~ msgstr ""
#~ "Taskul de pictare prin prelucrare 'rest' a tuturor poligoanelor a inceput."

#~ msgid "Painting polygons with method: lines."
#~ msgstr "Se pictează poligoane aflat icu metoda: linii."

#~ msgid "Failed. Painting polygons with method: seed."
#~ msgstr "Esuat. Se pictează poligoanele cu metoda: sămantă."

#~ msgid "Failed. Painting polygons with method: standard."
#~ msgstr "Esuat. Se pictează poligoanele cu metoda: standard."

#~ msgid ""
#~ "Could not do Paint All. Try a different combination of parameters. Or a "
#~ "different Method of paint"
#~ msgstr ""
#~ "Nu s-a efectuat op. 'Paint' pt toate poligoanele. Incearcă o combinaţie "
#~ "diferită de parametri. Sau încearcă o alta metoda de 'pictat'"

#~ msgid "Paint Tool. Normal painting area task started."
#~ msgstr "Unealta Paint. Taskul de pictare a unei arii a inceput."

#~ msgid "Rest machining painting area task started."
#~ msgstr ""
#~ "Taskul de pictare a unei arii cu strategia de masinare 'rest' a inceput."

#~ msgid "Executing Tcl Script ..."
#~ msgstr "Rulează Tcl Script..."

#~ msgid "Open cancelled."
#~ msgstr "Deschidere anulată."

#~ msgid "Preferences default restore was cancelled."
#~ msgstr "Restaurarea preferințelor implicite a fost anulată."

#~ msgid "FlatCAM preferences import cancelled."
#~ msgstr "Importul preferințelor FlatCAM a eșuat."

#~ msgid "FlatCAM preferences export cancelled."
#~ msgstr "Exportul preferințelor FlatCAM este anulat."

#~ msgid "Multigeo. Geometry merging finished"
#~ msgstr "Multigeo. Fuziunea geometriei s-a terminat"

#~ msgid "Units conversion cancelled."
#~ msgstr "Conversia unitătilor este anulată."

#~ msgid "Open Gerber cancelled."
#~ msgstr "Incărcarea unui fişier Gerber este anulată."

#~ msgid " Open Excellon cancelled."
#~ msgstr " Incărcarea unui fişier Excellon este anulată."

#~ msgid "Open G-Code cancelled."
#~ msgstr "Incărcarea unui fişier G-Code este anulată."

#~ msgid "Open Project cancelled."
#~ msgstr "Incărcarea unui fişier Proiect FlatCAM este anulată."

#~ msgid "Open HPGL2 file cancelled."
#~ msgstr "Incărcarea fișierului HPGL2 a fost anulată."

#~ msgid "Open Config cancelled."
#~ msgstr "Incărcarea unui fişier configurare FlatCAM este anulată."

#~ msgid " Export SVG cancelled."
#~ msgstr " Exportul fisierului SVG a fost anulat."

#~ msgid "Export PNG cancelled."
#~ msgstr "Exportul imagine PNG este anulat."

#~ msgid "No object selected. Please select an Gerber object to export."
#~ msgstr "Nici-un obiect selectat. Selectează un obiect Gerber pentru export."

#~ msgid "Save Gerber source file cancelled."
#~ msgstr "Salvarea codului sursa Gerber este anulată."

#~ msgid "No object selected. Please select an Script object to export."
#~ msgstr "Nici-un obiect selectat. Selectează un obiect Script pentru export."

#~ msgid "Save Script source file cancelled."
#~ msgstr "Salvarea codului sursa Script este anulată."

#~ msgid "No object selected. Please select an Document object to export."
#~ msgstr ""
#~ "Nici-un obiect selectat. Selectează un obiect Document pentru export."

#~ msgid "Save Document source file cancelled."
#~ msgstr "Salvarea codului sursa Document este anulată."

#~ msgid "No object selected. Please select an Excellon object to export."
#~ msgstr ""
#~ "Nici-un obiect selectat. Selectează un obiect Excellon pentru export."

#~ msgid "Saving Excellon source file cancelled."
#~ msgstr "Salvarea codului sursa Excellon este anulată."

#~ msgid "No object selected. Please Select an Excellon object to export."
#~ msgstr ""
#~ "Nici-un obiect selectat. Selectează un obiect Excellon pentru export."

#~ msgid "Export Excellon cancelled."
#~ msgstr "Exportul fișierului Excellon a fost anulat."

#~ msgid "No object selected. Please Select an Gerber object to export."
#~ msgstr "Nici-un obiect selectat. Selectează un obiect Gerber pentru export."

#~ msgid "Export Gerber cancelled."
#~ msgstr "Exportul fișierului Gerber a fost anulat."

#~ msgid "Export DXF cancelled."
#~ msgstr "Exportul fișierului DXF a fost anulat."

#~ msgid "Open SVG cancelled."
#~ msgstr "Incărcarea fișierului SVG a fost anulată."

#~ msgid "Open DXF cancelled."
#~ msgstr "Incărcarea fișierului DXF a fost anulată."

#~ msgid "Open TCL script cancelled."
#~ msgstr "Incărcarea fisierului TCL script anulată."

#~ msgid "Run TCL script cancelled."
#~ msgstr "Executarea fisierului Script a fost anulată."

#~ msgid "Save Project cancelled."
#~ msgstr "Salvarea Proiect anulată."

#~ msgid "Save Object PDF cancelled."
#~ msgstr "Salvarea obiectului PDF anulată."

#~ msgid "Shows list of commands."
#~ msgstr "Arata o lista de comenzi."

#~ msgid "FlatCAM bookmarks export cancelled."
#~ msgstr "Exportul de bookmark-uri FlatCAM este anulat."

#~ msgid "FlatCAM bookmarks import cancelled."
#~ msgstr "Importul de Bookmark-uri FlatCAM a eșuat."

#~ msgid "FlatCAM Tools DB export cancelled."
#~ msgstr "Exportul DB Unelte a fost anulat."

#~ msgid "FlatCAM Tools DB import cancelled."
#~ msgstr "Importul DB Unelte a fost anulat."

#~ msgid ""
#~ "Wrong value format for self.defaults[\"z_pdepth\"] or self."
#~ "options[\"z_pdepth\"]"
#~ msgstr ""
#~ "Valoare gresita pt self.defaults[\"z_pdepth\"] sau self.options[\"z_pdepth"
#~ "\"]"

#~ msgid ""
#~ "Wrong value format for self.defaults[\"feedrate_probe\"] or self."
#~ "options[\"feedrate_probe\"]"
#~ msgstr ""
#~ "Valoare gresita pt self.defaults[\"feedrate_probe\"] sau self."
#~ "options[\"feedrate_probe\"]"

#~ msgid "Starting G-Code..."
#~ msgstr "Pornirea G-Code ..."

#~ msgid ""
#~ "Algorithm to paint the polygon:<BR><B>Standard</B>: Fixed step inwards."
#~ "<BR><B>Seed-based</B>: Outwards from seed."
#~ msgstr ""
#~ "Algoritm pentru a picta poligonul<BR><B>Standard</B>: Pas fix spre "
#~ "interior.<BR><B>Samanta</B>: Spre exterior pornind de la un punct-samanta."

#~ msgid "Seed-based"
#~ msgstr "Punct-samanta"

#~ msgid "Straight lines"
#~ msgstr "Linii drepte"

#~ msgid "Paint cancelled. No shape selected."
#~ msgstr "Operaţie Paint anulată. Nici-o forma selectată."

#~ msgid "Transformation cancelled. No shape selected."
#~ msgstr "Transformare anulată. Nici-o formă nu este selectată."

#~ msgid "Buffer cancelled. No shape selected."
#~ msgstr ""
#~ "Crearea de geometrie Bufer anulată. Nici-o forma geometrică nu este "
#~ "selectată."

#~ msgid "Export Code cancelled."
#~ msgstr "Exportul Codului este anulat."

#~ msgid "&Save Project ..."
#~ msgstr "&Salvează Proiect ..."

#~ msgid "Save Project C&opy ..."
#~ msgstr "Salvează o C&opie Proiect..."

#~ msgid "Change the size of the object."
#~ msgstr "Schimbă dimensiunea obiectului."

#~ msgid "Change the position of this object."
#~ msgstr "Schimbă poziţia acestui obiect."

#~ msgid "Vector"
#~ msgstr "Vector"

#~ msgid ""
#~ "Create a CNC Job object\n"
#~ "for this drill object."
#~ msgstr ""
#~ "Crează un obiect CNCJob din\n"
#~ "acest obiect."

#~ msgid ""
#~ "Choose what to use for GCode generation:\n"
#~ "'Drills', 'Slots' or 'Both'.\n"
#~ "When choosing 'Slots' or 'Both', slots will be\n"
#~ "converted to a series of drills."
#~ msgstr ""
#~ "Alege ce să folosești pentru generarea de G-Code:\n"
#~ "- Găuri\n"
#~ "- Sloturi\n"
#~ "- Ambele\n"
#~ "Când se alege >Sloturi< sau >Ambele<, sloturile\n"
#~ "vor fi convertite intr-o serie de găuriri."

#~ msgid "Generate the CNC Job."
#~ msgstr "Generează un obiect CNCJob."

#~ msgid "Add Tool from DataBase"
#~ msgstr "Adăugați Unealta din DB Unelte"

#~ msgid "Select a theme for FlatCAM."
#~ msgstr "Selectați o temă pentru FlatCAM."

#~ msgid "Conv."
#~ msgstr "Conv."

#~ msgid "Diameters of the cutting tools, separated by ','"
#~ msgstr "Diametrele pentru unelte tăietoare, separate cu virgula"

#~ msgid "Tools dia"
#~ msgstr "Dia unealtă"

#~ msgid "The new tool diameter (cut width) to add in the tool table."
#~ msgstr ""
#~ "Noul diametru al sculei (lățimea tăiată) pt adăugare în tabelul Unelte."

#~ msgid ""
#~ "Algorithm for non-copper clearing:<BR><B>Standard</B>: Fixed step inwards."
#~ "<BR><B>Seed-based</B>: Outwards from seed.<BR><B>Line-based</B>: Parallel "
#~ "lines."
#~ msgstr ""
#~ "Algoritm pt curățare de cupru:<BR><B>Standard</B>: Pas fix spre interior."
#~ "<BR><B>Punct-samanta</B>: De la punctul samanta, spre expterior."
#~ "<BR><B>Linii drepte</B>: Linii paralele."

#~ msgid "Area"
#~ msgstr "Aria"

#~ msgid "Ref"
#~ msgstr "Ref"

#~ msgid ""
#~ "- 'Itself' -  the non copper clearing extent\n"
#~ "is based on the object that is copper cleared.\n"
#~ "- 'Area Selection' - left mouse click to start selection of the area to "
#~ "be painted.\n"
#~ "Keeping a modifier key pressed (CTRL or SHIFT) will allow to add multiple "
#~ "areas.\n"
#~ "- 'Reference Object' -  will do non copper clearing within the area\n"
#~ "specified by another object."
#~ msgstr ""
#~ "- „Însuși” - suprafața de curățare a cuprului\n"
#~ "se bazează pe obiectul care este curățat de cupru.\n"
#~ "  - „Selecție zonă” - faceți clic stânga cu mouse-ul pentru a începe "
#~ "selecția zonei care va fi pictată.\n"
#~ "Menținerea unei taste de modificare apăsată (CTRL sau SHIFT) va permite "
#~ "adăugarea mai multor zone.\n"
#~ "- „Obiect de referință” - va face o curățare fără cupru în zona\n"
#~ "specificată de un alt obiect."

#~ msgid "Sel"
#~ msgstr "Selectează"

#~ msgid "Diameters of nozzle tools, separated by ','"
#~ msgstr "Diametrele uneltelor (nozzle), separate prin virgula."

#~ msgid "Reference Gerber"
#~ msgstr "Referință Gerber"

#~ msgid "Reference Excellon"
#~ msgstr "Referință Excellon"

#~ msgid "Reference Geometry"
#~ msgstr "Referință Geometrie"

#~ msgid "Point/Box Reference"
#~ msgstr "Referință Punct/Container"

#~ msgid ""
#~ "If 'Point' is selected above it store the coordinates (x, y) through "
#~ "which\n"
#~ "the mirroring axis passes.\n"
#~ "If 'Box' is selected above, select here a FlatCAM object (Gerber, Exc or "
#~ "Geo).\n"
#~ "Through the center of this object pass the mirroring axis selected above."
#~ msgstr ""
#~ "Daca 'Punct' este selectat mai sus, atunci va stoca coordonatele (x,y) "
#~ "prin care\n"
#~ "axa de oglindire trece.\n"
#~ "Daca 'Container' este selectat mai sus atunci va fi disponibila aici o "
#~ "lista de obiecte\n"
#~ "FlatCAM: Gerber, Excellon sau Geometrie. Prin mijocul geometric al "
#~ "acestor obiecte\n"
#~ "va trece axa de oglindire selectată mai sus."

#~ msgid "Alignment Drill Diameter"
#~ msgstr "Dia. găuri de aliniere"

#~ msgid ""
#~ "'Point' coordinates missing. Using Origin (0, 0) as mirroring reference."
#~ msgstr ""
#~ "Coord. 'Punct'-ului lipsesc. Se folosesc coord. punctului Origine (0,0) "
#~ "ca ref. pt oglindire."

#~ msgid "Export positive film cancelled."
#~ msgstr "Exportul filmului pozitiv a fost anulat."

#~ msgid "Export negative film cancelled."
#~ msgstr "Exportul filmului negativ a fost anulat."

#~ msgid "Move action cancelled."
#~ msgstr "Actiunea de mutare a fost anulată."

#~ msgid "Diameter for the new tool."
#~ msgstr "Diametrul pt noua unealtă."

#~ msgid "Create Paint Geometry"
#~ msgstr "Crează un obiect Geometrie tip 'Paint'"

#~ msgid "Paint Tool. Reading parameters."
#~ msgstr "Unealta Paint. Se citesc parametrii."

#~ msgid "Paint Tool. Rest machining painting area task started."
#~ msgstr ""
#~ "Unealta Paint. Taskul de pictare a unei arii cu strategia de masinare "
#~ "'rest' a inceput."

#~ msgid "Properties Tool was not displayed. No object selected."
#~ msgstr ""
#~ "Unealta Proprietati nu a fost afișată. Nici-un obiect nu este selectat."

#~ msgid " Export PNG cancelled."
#~ msgstr " Exportul PNG a fost anulat."

#~ msgid "Adding Nozzle tool cancelled. Tool already in Tool Table."
#~ msgstr ""
#~ "Adăugarea unei unelte Nozzle a fost anulată. Unealta există deja in "
#~ "Tabela de Unelte."

#~ msgid ""
#~ "None of the following args: 'ref', 'all' were found or none was set to "
#~ "1.\n"
#~ "Copper clearing failed."
#~ msgstr ""
#~ "Niciunul din următoarele argumente: „ref”, „toate” nu au fost găsite sau "
#~ "nici unul nu a fost setat la 1.\n"
#~ "Curatarea de cupru a eșuat."

#~ msgid "PostProcessor"
#~ msgstr "Postprocesor"

#~ msgid "Default <b>Zeros</b>"
#~ msgstr "Suprimare <b>Zero</b>"

#~ msgid ""
#~ "This sets the default type of Excellon zeros.\n"
#~ "If it is not detected in the parsed file the value here\n"
#~ "will be used.If LZ then Leading Zeros are kept and\n"
#~ "Trailing Zeros are removed.\n"
#~ "If TZ is checked then Trailing Zeros are kept\n"
#~ "and Leading Zeros are removed."
#~ msgstr ""
#~ "Aici se setează tipul de suprimare a zerourilor,\n"
#~ "in cazul unui fişier Excellon.\n"
#~ "Daca nu se poate face detectia automata la parsarea\n"
#~ "fişierului Excellon, se folosesc aceste valori.\n"
#~ "LZ = zerourile din fata numărului sunt pastrate și\n"
#~ "cele de la final sunt indepartate.\n"
#~ "TZ = zerourile din fata numărului sunt indepartate și\n"
#~ "cele de la final sunt pastrate.\n"
#~ "(Invers fata de fişierele Gerber)."

#~ msgid "Default <b>Units</b>"
#~ msgstr "<b>Unitati</b> Excellon"

#~ msgid "Optimization Time"
#~ msgstr "Durata optimizare"

#~ msgid "Coordinates decimals"
#~ msgstr "Coord. zecimale"

#~ msgid "Feedrate decimals"
#~ msgstr "Feedrate zecimale"

#~ msgid "Rest M."
#~ msgstr "Rest M."

#~ msgid "Convex Sh."
#~ msgstr "Formă Conv."

#~ msgid "Add Tool to Tools DB"
#~ msgstr "Adăugați Unealta in DB Unelte"

#~ msgid "Remove Tool from Tools DB"
#~ msgstr "Stergeti Unealta din DB Unelte"

#~ msgid "Export Tool DB"
#~ msgstr "Export DB Unelte"

#~ msgid "Import Tool DB"
#~ msgstr "Import DB Unelte"

#~ msgid "Please enter the desired tool diameter in Float format."
#~ msgstr "Introdu diametrul dorit pt unealtă in format Real."

#~ msgid "Default Tool added. Wrong value format entered."
#~ msgstr "Unealta implicita adăugată dar valoarea are un format gresit."

#~ msgid "Import Preferences"
#~ msgstr "Importa Preferințele"

#~ msgid ""
#~ "Import a full set of FlatCAM settings from a file\n"
#~ "previously saved on HDD.\n"
#~ "\n"
#~ "FlatCAM automatically save a 'factory_defaults' file\n"
#~ "on the first start. Do not delete that file."
#~ msgstr ""
#~ "Importa un set complet de setări ale FlatCAM dintr-un fişier\n"
#~ "care a fost anterior salvat pe HDD..\n"
#~ "\n"
#~ "FlatCAM salvează automat un fişier numit 'factory_defaults'\n"
#~ "la prima pornire. Nu șterge acel fişier."

#~ msgid "Export Preferences"
#~ msgstr "Exporta Preferințele"

#~ msgid ""
#~ "Export a full set of FlatCAM settings in a file\n"
#~ "that is saved on HDD."
#~ msgstr ""
#~ "Exporta un set complet de setări ale FlatCAM\n"
#~ "intr-un fişier care se salvează pe HDD."

#~ msgid "Start move Z"
#~ msgstr "Z pornire"

#~ msgid "Grid X value"
#~ msgstr "Valoarea Grid_X"

#~ msgid "Grid Y value"
#~ msgstr "Valoarea Grid_Y"

#~ msgid "Wk. size"
#~ msgstr "Dim. Sp. Lucru"

#~ msgid "Sel. Fill"
#~ msgstr "Culoare Selecţie"

#~ msgid "Sel. Line"
#~ msgstr "Contur Selecţie"

#~ msgid "Sel2. Fill"
#~ msgstr "Culoare Selecţie 2"

#~ msgid "Sel2. Line"
#~ msgstr "Contur Selecţie 2"

#~ msgid "Editor Draw Sel."
#~ msgstr "Sel. in Editor Desen"

#~ msgid "Proj. Dis. Items"
#~ msgstr "Elem. Proi. dezactivate"

#~ msgid "Sel. Shape"
#~ msgstr "Forma de sel."

#~ msgid "NB Font Size"
#~ msgstr "Dim. font NB"

#~ msgid "Axis Font Size"
#~ msgstr "Dim. font axe"

#~ msgid "Textbox Font Size"
#~ msgstr "Dim. font Textbox"

#~ msgid "Shell at StartUp"
#~ msgstr "Shell la pornire"

#~ msgid "Project at StartUp"
#~ msgstr "Proiect la pornire"

#~ msgid "Mouse Cursor"
#~ msgstr "Cursor de mouse"

#~ msgid ""
#~ "Set the language used throughout FlatCAM.\n"
#~ "The app will restart after click.Windows: When FlatCAM is installed in "
#~ "Program Files\n"
#~ "directory, it is possible that the app will not\n"
#~ "restart after the button is clicked due of Windows\n"
#~ "security features. In this case the language will be\n"
#~ "applied at the next app start."
#~ msgstr ""
#~ "Seteaza limba folosită in FlatCAM.\n"
#~ "Aplicatia se va restarta după click.\n"
#~ "Windows: cand FlatCAM este instalat in directorul\n"
#~ "Program Files este posibil ca aplicatia să nu se restarteze\n"
#~ "după click datorită unor setări de securitate ale Windows."

#~ msgid "G-code does not have a units code: either G20 or G21"
#~ msgstr "G-code nu contine codul pt unitati: G20 sau G21"

#~ msgid ""
#~ "- 'Rectangular' - the bounding box will be of rectangular shape.\n"
#~ " - 'Minimal' - the bounding box will be the convex hull shape."
#~ msgstr ""
#~ "- „dreptunghiular” - caseta de delimitare va avea o formă "
#~ "dreptunghiulară.\n"
#~ "  - „Minimal” - caseta de delimitare va fi forma convexă a carenei."

#~ msgid ""
#~ "Type here any G-Code commands you would like to append to the generated "
#~ "file. I.e.: M2 (End of program)"
#~ msgstr ""
#~ "Introduceți aici toate comenzile Codului G pe care doriți să le adăugați "
#~ "la fișierul generat. I.e .: M2 (sfârșitul programului)"

#, fuzzy, python-format
#~| msgid ""
#~| "How much (fraction) of the tool width to overlap each tool pass.\n"
#~| "Example:\n"
#~| "A value here of 0.25 means 25%% from the tool diameter found above.\n"
#~| "\n"
#~| "Adjust the value starting with lower values\n"
#~| "and increasing it if areas that should be painted are still \n"
#~| "not painted.\n"
#~| "Lower values = faster processing, faster execution on PCB.\n"
#~| "Higher values = slow processing and slow execution on CNC\n"
#~| "due of too many paths."
#~ msgid ""
#~ "How much (fraction) of the tool width to overlap each tool pass.\n"
#~ "Example:\n"
#~ "A value here of 0.25 means 25%% from the tool diameter found above.\n"
#~ "\n"
#~ "Adjust the value starting with lower values\n"
#~ "and increasing it if areas that should be painted are still \n"
#~ "not painted.\n"
#~ "Lower values = faster processing, faster execution on CNC.\n"
#~ "Higher values = slow processing and slow execution on CNC\n"
#~ "due of too many paths."
#~ msgstr ""
#~ "Cat de mult (fracţie) din diametrul uneltei să se suprapună la fiecare "
#~ "trecere a uneltei.\n"
#~ "Exemplu:\n"
#~ "O valoare aici de 0.25 inseamna 25%% din diametrul uneltei de mai sus.\n"
#~ "\n"
#~ "Ajustează valoarea incepand de la valori mici și pe urma creste daca "
#~ "ariile care ar trebui\n"
#~ " >pictate< inca nu sunt procesate.\n"
#~ "Valori scazute = procesare rapida,execuţie rapida a PCB-ului.\n"
#~ "Valori mari= procesare lenta cat și o execuţie la fel de lenta a PCB-"
#~ "ului,\n"
#~ "datorita numărului mai mare de treceri-tăiere."

#, fuzzy
#~| msgid "Creating Excellon."
#~ msgid "Calibrate Tool"
#~ msgstr "In curs de creere Excellon."

#, python-brace-format
#~ msgid ""
#~ "[selected] {kind} created/selected: <span style=\"color:{color};\">{name}"
#~ "</span>"
#~ msgstr ""
#~ "[selected]{kind} creat/selectat: <span style=\"color:{color};\">{name}</"
#~ "span>"

#, python-brace-format
#~ msgid "[selected]<span style=\"color:{color};\">{name}</span> selected"
#~ msgstr "[selected]<span style=\"color:{color};\">{name}</span> selectat"

#, python-brace-format
#~ msgid "MEASURING: Result D(x) = {d_x} | D(y) = {d_y} | Distance = {d_z}"
#~ msgstr "Masoara: Rrezultat D(x) = {d_x} | D(y) = {d_y} | Distanta = {d_z}"

#, python-brace-format
#~ msgid "{l_save}/Project_{date}"
#~ msgstr "{l_save}/Proiect_{date}"

#, python-brace-format
#~| msgid "{l_save}/Project_{date}"
#~ msgid "{l_save}/{obj_name}_{date}"
#~ msgstr "{l_save}/{obj_name}_{date}"

#~ msgid "Paint Area"
#~ msgstr "Unealta Paint"

#~ msgid "Axis Ref:"
#~ msgstr "Axa de ref.:"

#~ msgid ""
#~ "#\n"
#~ "# CREATE A NEW FLATCAM TCL SCRIPT\n"
#~ "# TCL Tutorial here: https://www.tcl.tk/man/tcl8.5/tutorial/tcltutorial."
#~ "html\n"
#~ "#\n"
#~ "\n"
#~ "# FlatCAM commands list:\n"
#~ "# AddCircle, AddPolygon, AddPolyline, AddRectangle, AlignDrill, "
#~ "AlignDrillGrid, ClearShell, ClearCopper,\n"
#~ "# Cncjob, Cutout, Delete, Drillcncjob, ExportGcode, ExportSVG, Exteriors, "
#~ "GeoCutout, GeoUnion, GetNames,\n"
#~ "# GetSys, ImportSvg, Interiors, Isolate, Follow, JoinExcellon, "
#~ "JoinGeometry, ListSys, MillDrills,\n"
#~ "# MillSlots, Mirror, New, NewGeometry, Offset, OpenExcellon, OpenGCode, "
#~ "OpenGerber, OpenProject,\n"
#~ "# Options, Paint, Panelize, Plot, SaveProject, SaveSys, Scale, SetActive, "
#~ "SetSys, Skew, SubtractPoly,\n"
#~ "# SubtractRectangle, Version, WriteGCode\n"
#~ "#\n"
#~ "\n"
#~ msgstr ""
#~ "#\n"
#~ "# CREEAZA UN SCRIPT TCL NOU FLATCAM\n"
#~ "# TCL Tutorial aici: https://www.tcl.tk/man/tcl8.5/tutorial/tcltutorial."
#~ "html\n"
#~ "#\n"
#~ "\n"
#~ "# Lista de comenzi FlatCAM:\n"
#~ "# AddCircle, AddPolygon, AddPolyline, AddRectangle, AlignDrill, "
#~ "AlignDrillGrid, ClearShell, ClearCopper,\n"
#~ "# Cncjob, Cutout, Delete, Drillcncjob, ExportGcode, ExportSVG, Exteriors, "
#~ "GeoCutout, GeoUnion, GetNames,\n"
#~ "# GetSys, ImportSvg, Interiors, Isolate, Follow, JoinExcellon, "
#~ "JoinGeometry, ListSys, MillDrills,\n"
#~ "# MillSlots, Mirror, New, NewGeometry, Offset, OpenExcellon, OpenGCode, "
#~ "OpenGerber, OpenProject,\n"
#~ "# Options, Paint, Panelize, Plot, SaveProject, SaveSys, Scale, SetActive, "
#~ "SetSys, Skew, SubtractPoly,\n"
#~ "# SubtractRectangle, Version, WriteGCode\n"
#~ "#\n"
#~ "\n"

#~ msgid "Change project units ..."
#~ msgstr "Schimbă unitătile de măsură ..."

#, fuzzy
#~| msgid "Failed. No tool selected in the tool table ..."
#~ msgid "Only one tool can be selected in the Tools Database table"
#~ msgstr "Eșuat. Nici-o unealtă nu este selectată in Tabela de Unelte ..."

#~ msgid "Tool diameter value is missing or wrong format. Add it and retry."
#~ msgstr ""
#~ "Diametrul uneltei lipseste sau este intr-un format incompatibil. Adaugă-l "
#~ "și reîncearcă."

#~ msgid "Overlap value is missing or wrong format. Add it and retry."
#~ msgstr ""
#~ "Valoarea de suprapunere a uneltei lipseste sau este intr-un format "
#~ "incompatibil. Adaugă-o și reîncearcă."

#~ msgid "Margin distance value is missing or wrong format. Add it and retry."
#~ msgstr ""
#~ "Valoarea de margine lipseste sau este intr-un format incompatibil. Adaugă-"
#~ "o și reîncearcă."

#, fuzzy
#~| msgid "Non-Copper Clearing Tool"
#~ msgid "Copper Fill Tool"
#~ msgstr "Curățăre Non-Cupru"

#, python-format
#~ msgid ""
#~ "How much (fraction) of the tool width to overlap each tool pass.\n"
#~ "Example:\n"
#~ "A value here of 0.25 means an overlap of 25%% from the tool diameter "
#~ "found above."
#~ msgstr ""
#~ "Cat de mult (in fractii ale diametrului uneltei) să se suprapună trecerea "
#~ "curentă\n"
#~ "peste cea anterioară. \n"
#~ "Exemplu:\n"
#~ "O valoare de 0.25 reprezinta o suprapunere de 25%% din diametrul uneltei."

#~ msgid "FULL Geo"
#~ msgstr "Geo Full"

#~ msgid ""
#~ "Create the Geometry Object\n"
#~ "for isolation routing. It contains both\n"
#~ "the interiors and exteriors geometry."
#~ msgstr ""
#~ "Crează un obiect Geometrie pt izolare.\n"
#~ "Contine atat geometriile exterioare cat și\n"
#~ "pe cele interioare."

#~ msgid "Ext Geo"
#~ msgstr "Geo Ext"

#~ msgid ""
#~ "Create the Geometry Object\n"
#~ "for isolation routing containing\n"
#~ "only the exteriors geometry."
#~ msgstr ""
#~ "Crează obiectul Geometrie\n"
#~ "pt izolare conținând doar\n"
#~ "geometriile de exterior."

#~ msgid "Int Geo"
#~ msgstr "Geo Int"

#~ msgid ""
#~ "Create the Geometry Object\n"
#~ "for isolation routing containing\n"
#~ "only the interiors geometry."
#~ msgstr ""
#~ "Crează obiectul Geometrie\n"
#~ "pt izolare conținând doar\n"
#~ "geometriile de interior."

#~ msgid "Feed Rate X-Y"
#~ msgstr "Feedrate X-Y"

#~ msgid "Feed Rate Z"
#~ msgstr "Feedrate Z"

#~ msgid "Feed Rate Rapids"
#~ msgstr "Feedrate rapizi"

#~ msgid "Generate"
#~ msgstr "Generează"

#~ msgid "Wk. format"
#~ msgstr "Format SL"

#~ msgid "Ref."
#~ msgstr "Ref."

#, fuzzy
#~| msgid "Set Origin"
#~ msgid "Cal. Origin"
#~ msgstr "Setează Originea"

#, fuzzy
#~| msgid "STEP 1"
#~ msgid "STEP 5"
#~ msgstr "PAS 1"

#, fuzzy
#~| msgid "Calc. Tool"
#~ msgid "Cal Exc Tool"
#~ msgstr "Unealta Calc"

#~ msgid "Object to be cutout.                        "
#~ msgstr "Obiectul FlatCAM care va fi decupat. "

#~ msgid "Margin:"
#~ msgstr "Margine:"

#~ msgid "Gap size:"
#~ msgstr "Dim. punte:"

#~ msgid ""
#~ "The cutout shape can be of ny shape.\n"
#~ "Useful when the PCB has a non-rectangular shape."
#~ msgstr ""
#~ "Decupajul poate avea orice forma.\n"
#~ "Folositor când PCB-ul are o forma neregulata."

#~ msgid ""
#~ "The resulting cutout shape is\n"
#~ "always a rectangle shape and it will be\n"
#~ "the bounding box of the Object."
#~ msgstr ""
#~ "Forma decupajului va fi mereu de forma\n"
#~ "patratica și va fi forma înconjurătoare a\n"
#~ "obiectului FlatCAM decupat."

#~ msgid "Geo Obj"
#~ msgstr "Obiect Geo"

#~ msgid ""
#~ "Use the left mouse button (LMB) click\n"
#~ "to create a bridge gap to separate the PCB from\n"
#~ "the surrounding material."
#~ msgstr ""
#~ "Folosind click LMB se crează punţi de sustinere a PCB-ului\n"
#~ "de materialul din care este decupat."

#~ msgid "Generate Gap"
#~ msgstr "Generează Punte"

#~ msgid "Reset"
#~ msgstr "Reset"

#~ msgid "Resets all the fields."
#~ msgstr "Resetează toate câmpurile cu informatii."

#~ msgid "Overlap value must be between 0 (inclusive) and 1 (exclusive), "
#~ msgstr ""
#~ "Valoarea de suprapunere trebuie sa ia valori intre 0 (inclusiv) si 1 "
#~ "(exclusiv), "

#~ msgid "Overlap value must be between 0 (inclusive) and 1 (exclusive)"
#~ msgstr ""
#~ "Valoarea de suprapunere trrebuie sa ia valori intre 0 (inclusiv) si 1 "
#~ "(exclusiv)."

#~ msgid "Click inside the desired polygon."
#~ msgstr "Click in interiorul poligonului care se dorește să fie 'pictat'."

#~ msgid "Export G-Code ..."
#~ msgstr "Exporta G-Code ..."

#~ msgid "&View"
#~ msgstr "&Vizualizare"

#~ msgid "&Tool"
#~ msgstr "Unelte"

#~ msgid "APP.  DEFAULTS"
#~ msgstr "Default for App"

#~ msgid "PROJ. OPTIONS "
#~ msgstr "Opțiuni Proiect "

#~ msgid ""
#~ "Select from the Tools Table above\n"
#~ "the hole dias that are to be drilled.\n"
#~ "Use the # column to make the selection."
#~ msgstr ""
#~ "Selecteaa din Tabela de Unelte de mai sus\n"
#~ "acele găuri care vor fi frezate.\n"
#~ "Foloseste coloanal # pt a face această selectie."

#~ msgid "y_toolchange = Y coord for Toolchange"
#~ msgstr "y_toolchange = coord. Y pt schimb unealtă"

#~ msgid "Gerber   Reference Box Object"
#~ msgstr "Obiectul container al Gerber de referinţă"

#~ msgid "Excellon Reference Box Object"
#~ msgstr "Obiectul container al Excellon de referinţă"

#~ msgid "Geometry Reference Box Object"
#~ msgstr "Obiectul container al Geo de referinţă"

#, fuzzy
#~| msgid "{l_save}/Project_{date}"
#~ msgid "{l_save}/FlatCAM_Bookmarks_{date}"
#~ msgstr "{l_save}/Proiect_{date}"

#, fuzzy
#~| msgid "Could not load defaults file."
#~ msgid "Could not load bookamrks file."
#~ msgstr "Nu am putut incărca fişierul cu valori default."

#~ msgid "&Help"
#~ msgstr "Ajutor"

#~ msgid "FlatCAM.org"
#~ msgstr "FlatCAM.org"

#~ msgid "tool = tool number"
#~ msgstr "tool = numărul uneltei"

#~ msgid "tooldia = tool diameter"
#~ msgstr "tooldia = dimaetrul uneltei"

#~ msgid "t_drills = for Excellon, total number of drills"
#~ msgstr "t_drills = pt Excellom, numărul total de operațiuni găurire"

#~ msgid "x_toolchange = X coord for Toolchange"
#~ msgstr "x_toolchange = coord. X pt schimb unealtă"

#~ msgid "z_toolchange = Z coord for Toolchange"
#~ msgstr "z_toolchange = coord. Z pt schimb unealtă"

#~ msgid "z_depthpercut = the step value for multidepth cut"
#~ msgstr "z_depthpercut = pasul pentru taierea progresiva"

#~ msgid "spindlesspeed = the value for the spindle speed"
#~ msgstr "spindlesspeed = valoarea viteza motor"

#~ msgid "Rotate Angle"
#~ msgstr "Unghi Rotaţie"

#~ msgid "Skew_X angle"
#~ msgstr "Unghi Deform_X"

#~ msgid "Skew_Y angle"
#~ msgstr "Unghi Deform_Y"

#~ msgid "Scale_X factor"
#~ msgstr "Factor Scal_X"

#~ msgid "Scale_Y factor"
#~ msgstr "Factor Scal_Y"

#~ msgid "Offset_X val"
#~ msgstr "Ofset_X"

#~ msgid "Offset_Y val"
#~ msgstr "Ofset_Y"

#~ msgid " Mirror Ref. Point"
#~ msgstr " Pt. Ref. Oglindire"

#, fuzzy
#~| msgid "Excellon file"
#~ msgid "Excellon Files"
#~ msgstr "Fisier Excellon"

#~ msgid "Go"
#~ msgstr "Execută"

#~ msgid "There are no polygons to mark area."
#~ msgstr "Nu există poligoane care sa fie marcate."

#~ msgid "&Edit"
#~ msgstr "&Editare"

#~ msgid "&Options"
#~ msgstr "&Opțiuni"

#~ msgid "Measurement Tool"
#~ msgstr "Unealta Măsuratoare"

#~ msgid "Margin value is missing or wrong format. Add it and retry."
#~ msgstr ""
#~ "Valoarea marginii lipseste sau este in format gresit. Adaugă din nou și "
#~ "reîncearcă."

#~ msgid "Gap size value is missing or wrong format. Add it and retry."
#~ msgstr ""
#~ "Valoarea dimensiunii punte lipseste sau este in format gresit. Adaugă din "
#~ "nou și reîncearcă."

#~ msgid "Measurement"
#~ msgstr "Masuratoare"

#~ msgid "Meas. Tool"
#~ msgstr "Unealta Măsur."

#~ msgid "Not available with the current Graphic Engine Legacy(2D)."
#~ msgstr "Indisponibil pentru motorul grafic current (2D)."

#~ msgid "ToolMove.on_left_click()"
#~ msgstr "ToolMove.on_left_click()"

#~ msgid "on_paint_button_click"
#~ msgstr "on_paint_button_click"

#~ msgid "PaintTool.paint_poly()"
#~ msgstr "PaintTool.paint_poly()"

#~ msgid "ToolSolderPaste.on_view_gcode()"
#~ msgstr "ToolSolderPaste.on_view_gcode()"

#~ msgid "App.on_fileopenscript() -->"
#~ msgstr "App.on_fileopenscript() -->"

#~ msgid "<span style=\"color:green;\"><b>%s</b></span>"
#~ msgstr "<span style=\"color:green;\"><b>%s</b></span>"

#~ msgid "<span style=\"color:red;\"><b>%s</b></span>"
#~ msgstr "<span style=\"color:red;\"><b>%s</b></span>"

#~ msgid "FlatCAMObj.GeometryObject.mtool_gen_cncjob() -->"
#~ msgstr "FlatCAMObj.GeometryObject.mtool_gen_cncjob() -->"

#~ msgid "FlatCAMCNNJob.on_edit_code_click() -->"
#~ msgstr "FlatCAMCNNJob.on_edit_code_click() -->"

#~ msgid ""
#~ "toolbars, key shortcuts or even dragging and dropping the files on the GUI"
#~ msgstr ""
#~ "toolbaruri, taste shortcut sau chiar drag - drop a fisierelor in GUI"

#~ msgid ""
#~ "You can also load a FlatCAM project by double clicking on the project "
#~ "file, drag"
#~ msgstr ""
#~ "Se poate incarca un proiect FlatCAM si prin dublu-click pe fisierul "
#~ "proiect, drag -"

#~ msgid ""
#~ "Once an object is available in the Project Tab, by selecting it and then "
#~ "focusing on"
#~ msgstr ""
#~ "Odata ce obiectul este disponibil in Tab-ul Proiect, prin selectarea si "
#~ "apoi focalizarea pe"

#~ msgid "SELECTED TAB"
#~ msgstr "TAB-ul SELECTAT"

#~ msgid "more simpler is to double click the object name in the Project Tab"
#~ msgstr ""
#~ "mai simplu este sa se faca dublu click pe numele obiectului in Tab-ul "
#~ "Proiect"

#~ msgid "will be updated with the object properties according to"
#~ msgstr "va fi actualizat cu proprietatile obiectului conform cu"

#~ msgid "kind: Gerber, Excellon, Geometry or CNCJob object"
#~ msgstr "tip: obiect Gerber, Excellon, Geometrie sau CNCJob"

#~ msgid ""
#~ "If the selection of the object is done on the canvas by single click "
#~ "instead, and the"
#~ msgstr ""
#~ "Daca selectia obiectului este efectuata pe canvas prin simplu click, si"

#~ msgid "and populate it even if it was out of focus"
#~ msgstr "si il va popula chiar daca a fost nefocalizat"

#~ msgid "Gerber/Excellon Object"
#~ msgstr "Obiect Gerber/Excellon"

#~ msgid "Change Parameter"
#~ msgstr "Schimba Parametri"

#~ msgid "Add tools (change param in Selected Tab)"
#~ msgstr "Adauga unelte (schimba parametrul in Tab-ul Selectat)"

#~ msgid "Generate CNCJob"
#~ msgstr "Generează CNCJob"

#~ msgid ""
#~ "Verify GCode (through Edit CNC Code) and/or append/prepend to GCode "
#~ "(again, done in"
#~ msgstr ""
#~ "Verifica GCode (cu ajutorul Editorului) si/sau adauga la GCode (din nou, "
#~ "efectuat in"

#~ msgid "Shortcuts List"
#~ msgstr "Lista shortcut-uri"

#~ msgid "or through"
#~ msgstr "sau prin"

#~ msgid "own key shortcut"
#~ msgstr "propria tasta shortcut"

#~ msgid "polygons"
#~ msgstr "poligoane"

#~ msgid "geo"
#~ msgstr "geo"

#~ msgid "Stop"
#~ msgstr "Stop"

#~ msgid "Generating panel ..."
#~ msgstr "Se generează Panel-ul..."

#~ msgid "Spawning copies"
#~ msgstr "Genereaza copii noi"

#~ msgid "Parsing tool"
#~ msgstr "Analizează unealta"

#~ msgid ""
#~ " Wrong value format for self.defaults[\"feedrate_probe\"] or self."
#~ "options[\"feedrate_probe\"]"
#~ msgstr ""
#~ " Valoare gresita pt self.defaults[\"feedrate_probe\"] sau self."
#~ "options[\"feedrate_probe\"]"

#~ msgid "Wrong optimization type selected."
#~ msgstr "Un tip de optimizare incorrect a fost selectat."

#~ msgid "FILE ASSOCIATIONS"
#~ msgstr "ASOCIERI FISIERE"

#~ msgid "MH"
#~ msgstr "MH"

#~ msgid "Feedrate (Plunge)"
#~ msgstr "Feedrate (Plonjare)"

#~ msgid ""
#~ "Parameters used to create a CNC Job object\n"
#~ "for this drill object that are shown when App Level is Advanced."
#~ msgstr ""
#~ "Parametri folositi pentru a crea un obiect CNCJob\n"
#~ "pt acest obiect Excellon, parametri care sunt disponibili\n"
#~ "doar in modul Avansat al aplicaţiei."

#~ msgid ""
#~ "Parameters to create a CNC Job object\n"
#~ "tracing the contours of a Geometry object."
#~ msgstr ""
#~ "Parametrii folositi pentru a crea un obiect CNCJob,\n"
#~ "urmărind contururile unui obiect tip Geometrie."

#~ msgid "Manufacturing"
#~ msgstr "Productie"

#~ msgid "Function"
#~ msgstr "Functie"

#~ msgid ""
#~ "\n"
#~ "<p><span style=\"font-size:{tsize}px\"><strong>Selected Tab - Choose an "
#~ "Item from Project Tab</strong></span></p>\n"
#~ "\n"
#~ "<p><span style=\"font-size:{fsize}px\"><strong>Details</strong>:<br />\n"
#~ "The normal flow when working in FlatCAM is the following:</span></p>\n"
#~ "\n"
#~ "<ol>\n"
#~ "\t<li><span style=\"font-size:{fsize}px\">Loat/Import a Gerber, Excellon, "
#~ "Gcode, DXF, Raster Image or SVG file into FlatCAM using either the "
#~ "menu&#39;s, toolbars, key shortcuts or even dragging and dropping the "
#~ "files on the GUI.<br />\n"
#~ "\t<br />\n"
#~ "\tYou can also load a <strong>FlatCAM project</strong> by double clicking "
#~ "on the project file, drag &amp; drop of the file into the FLATCAM GUI or "
#~ "through the menu/toolbar links offered within the app.</span><br />\n"
#~ "\t&nbsp;</li>\n"
#~ "\t<li><span style=\"font-size:{fsize}px\">Once an object is available in "
#~ "the Project Tab, by selecting it and then focusing on <strong>SELECTED "
#~ "TAB </strong>(more simpler is to double click the object name in the "
#~ "Project Tab), <strong>SELECTED TAB </strong>will be updated with the "
#~ "object properties according to it&#39;s kind: Gerber, Excellon, Geometry "
#~ "or CNCJob object.<br />\n"
#~ "\t<br />\n"
#~ "\tIf the selection of the object is done on the canvas by single click "
#~ "instead, and the <strong>SELECTED TAB</strong> is in focus, again the "
#~ "object properties will be displayed into the Selected Tab. Alternatively, "
#~ "double clicking on the object on the canvas will bring the "
#~ "<strong>SELECTED TAB</strong> and populate it even if it was out of focus."
#~ "<br />\n"
#~ "\t<br />\n"
#~ "\tYou can change the parameters in this screen and the flow direction is "
#~ "like this:<br />\n"
#~ "\t<br />\n"
#~ "\t<strong>Gerber/Excellon Object</strong> -&gt; Change Param -&gt; "
#~ "Generate Geometry -&gt;<strong> Geometry Object </strong>-&gt; Add tools "
#~ "(change param in Selected Tab) -&gt; Generate CNCJob -&gt;<strong> CNCJob "
#~ "Object </strong>-&gt; Verify GCode (through Edit CNC Code) and/or append/"
#~ "prepend to GCode (again, done in <strong>SELECTED TAB)&nbsp;</strong>-"
#~ "&gt; Save GCode</span></li>\n"
#~ "</ol>\n"
#~ "\n"
#~ "<p><span style=\"font-size:{fsize}px\">A list of key shortcuts is "
#~ "available through an menu entry in <strong>Help -&gt; Shortcuts List</"
#~ "strong>&nbsp;or through it&#39;s own key shortcut: <strong>F3</strong>.</"
#~ "span></p>\n"
#~ "\n"
#~ "        "
#~ msgstr ""
#~ "\n"
#~ "<p><span style=\"font-size:{tsize}\"><strong>Tab Selectat - Alege o "
#~ "intrare din Tab-ul Proiect</strong></span></p>\n"
#~ "\n"
#~ "<p><span style=\"font-size:{fsize}\"><strong>Detalii</strong>:<br />\n"
#~ "Fluxul normal când se lucrează in FlatCAM este următorul:</span></p>\n"
#~ "\n"
#~ "<ol>\n"
#~ "\t<li><span style=\"font-size:{fsize}\">Încarcă/Importa un fişier Gerber, "
#~ "Excellon, Gcode, DXF, Imagine Raster sau SVG in FlatCAM folosind ori "
#~ "meniurile, toolbarurile, tastele shortcut sau chiar tragerea și "
#~ "eliberarea fişierelor in fereastra FlatCAM.<br />\n"
#~ "\t<br />\n"
#~ "\tPoti să incarci și un <strong>proiect FlatCAM</strong> prin dublu click "
#~ "pe fişierul proiect, tragerea și eliberarea fişierului peste FLATCAM GUI "
#~ "sau prin sistemul de meniuri/toolbaruri oferit in cadrul aplicaţiei.</"
#~ "span><br />\n"
#~ "\t&nbsp;</li>\n"
#~ "\t<li><span style=\"font-size:{fsize}\">Odata ce un obiect este "
#~ "disponibil in Tab-ul Proiect, prin selectarea și focalizarea in "
#~ "<strong>Tab-ul SELECTAT</strong>(mai simplu prin dublu click pe numele "
#~ "obiectului in lista dinTab-ul Proiect), <strong>Tab-ul SELECTAT </"
#~ "strong>va fi updatat conform cu tipul sau: Gerber, Excellon, Geometrie "
#~ "sau CNCJob.<br />\n"
#~ "\t<br />\n"
#~ "\tDaca selectia este efectuata pe Canvas prin simplu click și <strong>Tab-"
#~ "ul SELECTAT</strong> este in focus, din nou, proprietatile obiectului vor "
#~ "fi afisate in Tab-ul SELECTAT. Alternativ, prin dublu click pe obiect in "
#~ "Canvas se va aduce <strong>Tab-ul SELECTAT</strong> in focus și va fi "
#~ "actualizat cu informaţie chair daca initial nu era focalizat.<br />\n"
#~ "\t<br />\n"
#~ "\tO suma de parametri se pot schimba in acest Tab and directia in lucru "
#~ "este urmatoarea:<br />\n"
#~ "\t<br />\n"
#~ "\t<strong>Obiectul Gerber/Excellon</strong> -&gt; Schimba Parametru -&gt; "
#~ "Generează Geometrie -&gt;<strong>Obiectul Geometrie </strong>-&gt; Adaugă "
#~ "unelte (prin schimbare parametru in Tab-ul SELECTAT) -&gt; Generează "
#~ "CNCJob -&gt;<strong> Obiect CNCJob</strong>-&gt; Verifică GCode (folosind "
#~ "Editare cod CNC) și/sau Adaugă cod GCode la inceput/la sfârşit (din nou, "
#~ "efectuat in <strong>Tab-ul SELECTAT)&nbsp;</strong>-&gt; Salvează GCode</"
#~ "span></li>\n"
#~ "</ol>\n"
#~ "\n"
#~ "<p><span style=\"font-size:{fsize}\">O lista cu tastele shortcut este "
#~ "disponibila ca și meniu  in <strong>Help -&gt;Lista Shortcut-uri</"
#~ "strong>&nbsp;sau prin propria tasta shortcutt: <strong>F3</strong>.</"
#~ "span></p>\n"
#~ "\n"
#~ "        "

#~ msgid "Run Script ...\tShift+S"
#~ msgstr "Rulează Script ...\tShift+S"

#~ msgid ""
#~ "<font size=8><B>FlatCAM</B></font><BR>Version {version} {beta} ({date}) - "
#~ "{arch} <BR><BR>2D Computer-Aided Printed Circuit Board<BR>Manufacturing."
#~ "<BR><BR><B> License: </B><BR>Licensed under MIT license (2014 - "
#~ "2019)<BR>by (c)Juan Pablo Caram <BR><BR><B> Programmers:</B><BR>Denis "
#~ "Hayrullin<BR>Kamil Sopko<BR>Marius Stanciu<BR>Matthieu Berthomé<BR>and "
#~ "many others found <a href = \"https://bitbucket.org/jpcgt/flatcam/pull-"
#~ "requests/?state=MERGED\">here.</a><BR><BR><B>Development</B> is done <a "
#~ "href = \"https://bitbucket.org/jpcgt/flatcam/src/Beta/\">here.</"
#~ "a><BR><b>DOWNLOAD</B> area <a href = \"https://bitbucket.org/jpcgt/"
#~ "flatcam/downloads/\">here.</a><BR>"
#~ msgstr ""
#~ "<font size=8><B>FlatCAM </B></font><BR> Versiunea {version} {beta} "
#~ "({date}) - {arch} <BR><BR> Fabricare de Plăci de circuit imprimat "
#~ "asistată de<BR> procesare PC 2D. <BR><BR><B>Licență: </B><BR>Licențiat "
#~ "sub licență MIT (2014 - 2019)<BR>de (c) Juan Pablo Caram<BR><BR><B "
#~ ">Programatori:</B><BR>Denis Hayrullin<BR>Kamil Sopko<BR>Marius "
#~ "Stanciu<BR>Matthieu Berthomé<BR>și mulți alții pot fi găsiti <a href="
#~ "\"https://bitbucket.org/jpcgt/flatcam/pull-Request/?state=MERGED \">aici. "
#~ "</a><BR><BR><B>Dezvoltarea</B>se face <a href=\" https://bitbucket.org/"
#~ "jpcgt/flatcam/src/Beta / \">aici.</a><BR><b>DOWLOAD</B>:<a href=\"https://"
#~ "bitbucket.org/jpcgt/flatcam/downloads/\">aici.</a><BR>"

#~ msgid "Expected a GeometryObject, got %s"
#~ msgstr "Se astepta o Geometrie FlatCAM, s-a primit %s"

#~ msgid "Saved to: %s"
#~ msgstr "Salvat in: %s"

#~ msgid "[WARNING_NOTCL] Adding Tool cancelled ..."
#~ msgstr "[WARNING_NOTCL] Adăugarea unei unelte anulată ..."

#~ msgid "%s"
#~ msgstr "%s"

#~| msgid "[ERROR]App.on_view_source() -->%s"
#~ msgid "App.on_view_source() -->"
#~ msgstr "App.on_view_source() -->"

#~ msgid "[success] Name changed from {old} to {new}"
#~ msgstr "[success] Numele schimbat din {old} in {new}"

#~| msgid ""
#~| "[ERROR_NOTCL] Failed.\n"
#~| "%s"
#~ msgid "[ERROR_NOTCL] %s"
#~ msgstr "[ERROR_NOTCL] %s"

#~ msgid "Editor %s"
#~ msgstr "Editor %s"

#~ msgid "[success] Done. Path completed."
#~ msgstr "[success] Executata. Adăugarea unei forme tip Cale terminată."

#~ msgid "[success] Paint done."
#~ msgstr "[success] Paint executat."

#~ msgid "About"
#~ msgstr "Despre"

#~ msgid ""
#~ "<b>General Shortcut list</b><br>\n"
#~ "            <table border=\"0\" cellpadding=\"0\" cellspacing=\"0\" style="
#~ "\"width:283px\">\n"
#~ "                <tbody>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\" width=\"89\"><strong>F3</"
#~ "strong></td>\n"
#~ "                        <td width=\"194\"><span style=\"color:"
#~ "#006400\"><strong>&nbsp;SHOW SHORTCUT LIST</strong></span></td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>1</strong></td>\n"
#~ "                        <td>&nbsp;Switch to Project Tab</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>2</strong></td>\n"
#~ "                        <td>&nbsp;Switch to Selected Tab</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>3</strong></td>\n"
#~ "                        <td>&nbsp;Switch to Tool Tab</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>B</strong></td>\n"
#~ "                        <td>&nbsp;New Gerber</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>E</strong></td>\n"
#~ "                        <td>&nbsp;Edit Object (if selected)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>G</strong></td>\n"
#~ "                        <td>&nbsp;Grid On/Off</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>J</strong></td>\n"
#~ "                        <td>&nbsp;Jump to Coordinates</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>L</strong></td>\n"
#~ "                        <td>&nbsp;New Excellon</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>M</strong></td>\n"
#~ "                        <td>&nbsp;Move Obj</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>N</strong></td>\n"
#~ "                        <td>&nbsp;New Geometry</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>O</strong></td>\n"
#~ "                        <td>&nbsp;Set Origin</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Q</strong></td>\n"
#~ "                        <td>&nbsp;Change Units</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>P</strong></td>\n"
#~ "                        <td>&nbsp;Open Properties Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>R</strong></td>\n"
#~ "                        <td>&nbsp;Rotate by 90 degree CW</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>S</strong></td>\n"
#~ "                        <td>&nbsp;Shell Toggle</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>T</strong></td>\n"
#~ "                        <td>&nbsp;Add a Tool (when in Geometry Selected "
#~ "Tab or in Tools NCC or Tools Paint)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>V</strong></td>\n"
#~ "                        <td>&nbsp;Zoom Fit</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>X</strong></td>\n"
#~ "                        <td>&nbsp;Flip on X_axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Y</strong></td>\n"
#~ "                        <td>&nbsp;Flip on Y_axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>&#39;-&#39;</strong></"
#~ "td>\n"
#~ "                        <td>&nbsp;Zoom Out</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>&#39;=&#39;</strong></"
#~ "td>\n"
#~ "                        <td>&nbsp;Zoom In</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Ctrl+A</strong></td>\n"
#~ "                        <td>&nbsp;Select All</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Ctrl+C</strong></td>\n"
#~ "                        <td>&nbsp;Copy Obj</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Ctrl+E</strong></td>\n"
#~ "                        <td>&nbsp;Open Excellon File</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Ctrl+G</strong></td>\n"
#~ "                        <td>&nbsp;Open Gerber File</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Ctrl+N</strong></td>\n"
#~ "                        <td>&nbsp;New Project</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Ctrl+M</strong></td>\n"
#~ "                        <td>&nbsp;Measurement Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Ctrl+O</strong></td>\n"
#~ "                        <td>&nbsp;Open Project</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Ctrl+S</strong></td>\n"
#~ "                        <td>&nbsp;Save Project As</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Ctrl+F10</strong></td>\n"
#~ "                        <td>&nbsp;Toggle Plot Area</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Shift+C</strong></td>\n"
#~ "                        <td>&nbsp;Copy Obj_Name</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Shift+E</strong></td>\n"
#~ "                        <td>&nbsp;Toggle Code Editor</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Shift+G</strong></td>\n"
#~ "                        <td>&nbsp;Toggle the axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Shift+P</strong></td>\n"
#~ "                        <td>&nbsp;Open Preferences Window</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Shift+R</strong></td>\n"
#~ "                        <td>&nbsp;Rotate by 90 degree CCW</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Shift+S</strong></td>\n"
#~ "                        <td>&nbsp;Run a Script</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Shift+W</strong></td>\n"
#~ "                        <td>&nbsp;Toggle the workspace</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Shift+X</strong></td>\n"
#~ "                        <td>&nbsp;Skew on X axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Shift+Y</strong></td>\n"
#~ "                        <td>&nbsp;Skew on Y axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Alt+C</strong></td>\n"
#~ "                        <td>&nbsp;Calculators Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Alt+D</strong></td>\n"
#~ "                        <td>&nbsp;2-Sided PCB Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Alt+K</strong></td>\n"
#~ "                        <td>&nbsp;Solder Paste Dispensing Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Alt+L</strong></td>\n"
#~ "                        <td>&nbsp;Film PCB Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Alt+N</strong></td>\n"
#~ "                        <td>&nbsp;Non-Copper Clearing Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Alt+P</strong></td>\n"
#~ "                        <td>&nbsp;Paint Area Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Alt+Q</strong></td>\n"
#~ "                        <td>&nbsp;PDF Import Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Alt+R</strong></td>\n"
#~ "                        <td>&nbsp;Transformations Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Alt+S</strong></td>\n"
#~ "                        <td>&nbsp;View File Source</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Alt+U</strong></td>\n"
#~ "                        <td>&nbsp;Cutout PCB Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Alt+1</strong></td>\n"
#~ "                        <td>&nbsp;Enable all Plots</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Alt+2</strong></td>\n"
#~ "                        <td>&nbsp;Disable all Plots</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Alt+3</strong></td>\n"
#~ "                        <td>&nbsp;Disable Non-selected Plots</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Alt+F10</strong></td>\n"
#~ "                        <td>&nbsp;Toggle Full Screen</td>\n"
#~ "                    </tr>                 \n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Ctrl+Alt+X</strong></"
#~ "td>\n"
#~ "                        <td>&nbsp;Abort current task (gracefully)</td>\n"
#~ "                    </tr>                    \n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>F1</strong></td>\n"
#~ "                        <td>&nbsp;Open Online Manual</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>F4</strong></td>\n"
#~ "                        <td>&nbsp;Open Online Tutorials</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Del</strong></td>\n"
#~ "                        <td>&nbsp;Delete Object</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Del</strong></td>\n"
#~ "                        <td>&nbsp;Alternate: Delete Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>'`'</strong></td>\n"
#~ "                        <td>&nbsp;(left to Key_1)Toogle Notebook Area "
#~ "(Left Side)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>SPACE</strong></td>\n"
#~ "                        <td>&nbsp;En(Dis)able Obj Plot</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Escape</strong></td>\n"
#~ "                        <td>&nbsp;Deselects all objects</td>\n"
#~ "                    </tr>\n"
#~ "                </tbody>\n"
#~ "            </table>\n"
#~ "    \n"
#~ "            "
#~ msgstr ""
#~ "<b>General Shortcut list</b><br>\n"
#~ "            <table border=\"0\" cellpadding=\"0\" cellspacing=\"0\" style="
#~ "\"width:283px\">\n"
#~ "                <tbody>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\" width=\"89\"><strong>F3</"
#~ "strong></td>\n"
#~ "                        <td width=\"194\"><span style=\"color:"
#~ "#006400\"><strong>&nbsp;Afișează Lista de Shortcut-uri</strong></span></"
#~ "td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>1</strong></td>\n"
#~ "                        <td>&nbsp;Focus in Tab-ul Proiect</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>2</strong></td>\n"
#~ "                        <td>&nbsp;Focus in Tab-ul Selectat</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>3</strong></td>\n"
#~ "                        <td>&nbsp;Focus in Tab-ul Unelte</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>B</strong></td>\n"
#~ "                        <td>&nbsp;Gerber Nou</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>E</strong></td>\n"
#~ "                        <td>&nbsp;Editează Obiectul (daca este selectat)</"
#~ "td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>G</strong></td>\n"
#~ "                        <td>&nbsp;Grid On/Off</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>J</strong></td>\n"
#~ "                        <td>&nbsp;Sari la Coordinate</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>L</strong></td>\n"
#~ "                        <td>&nbsp;Excellon Nou</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>M</strong></td>\n"
#~ "                        <td>&nbsp;Mută Obj</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>N</strong></td>\n"
#~ "                        <td>&nbsp;Geometrie Nouă</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>O</strong></td>\n"
#~ "                        <td>&nbsp;Setează Originea</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Q</strong></td>\n"
#~ "                        <td>&nbsp;Schimbă Unitătile</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>P</strong></td>\n"
#~ "                        <td>&nbsp;Deschide Unealta de Proprietati</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>R</strong></td>\n"
#~ "                        <td>&nbsp;Rotește cu 90 grade CW</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>S</strong></td>\n"
#~ "                        <td>&nbsp;Comută Shell (linia de comandă)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>T</strong></td>\n"
#~ "                        <td>&nbsp;Adaugă o Unealtă (când focus-ul este in "
#~ "Tab-ul Selectat pt Geo, sau in Unealta NCC sau unealta Paint)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>V</strong></td>\n"
#~ "                        <td>&nbsp;Mărește și potrivește</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>X</strong></td>\n"
#~ "                        <td>&nbsp;Oglindește pe axa X</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Y</strong></td>\n"
#~ "                        <td>&nbsp;Oglindește pe axa Y</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>&#39;-&#39;</strong></"
#~ "td>\n"
#~ "                        <td>&nbsp;Micșorează</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>&#39;=&#39;</strong></"
#~ "td>\n"
#~ "                        <td>&nbsp;Mărește</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Ctrl+A</strong></td>\n"
#~ "                        <td>&nbsp;Selectează Tot</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Ctrl+C</strong></td>\n"
#~ "                        <td>&nbsp;Copiază Obiect</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Ctrl+E</strong></td>\n"
#~ "                        <td>&nbsp;Deschide fişier Excellon</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Ctrl+G</strong></td>\n"
#~ "                        <td>&nbsp;Deschide fişier Gerber</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Ctrl+N</strong></td>\n"
#~ "                        <td>&nbsp;Proiect Nou</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Ctrl+M</strong></td>\n"
#~ "                        <td>&nbsp;Unealta de Masurare</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Ctrl+O</strong></td>\n"
#~ "                        <td>&nbsp;Deschide Proiect</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Ctrl+S</strong></td>\n"
#~ "                        <td>&nbsp;Salvează Proiect ca</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Ctrl+F10</strong></td>\n"
#~ "                        <td>&nbsp;Comută Aria de Afișare</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Shift+C</strong></td>\n"
#~ "                        <td>&nbsp;Copiază Nume Obiect</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Shift+E</strong></td>\n"
#~ "                        <td>&nbsp;Comută Editor Cod</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Shift+G</strong></td>\n"
#~ "                        <td>&nbsp;Comută Axele</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Shift+P</strong></td>\n"
#~ "                        <td>&nbsp;Deschide Preferințe</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Shift+R</strong></td>\n"
#~ "                        <td>&nbsp;Rotește cu 90 grade CCW</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Shift+S</strong></td>\n"
#~ "                        <td>&nbsp;Rulează un Script</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Shift+W</strong></td>\n"
#~ "                        <td>&nbsp;Comută Spatiul de Lucru</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Shift+X</strong></td>\n"
#~ "                        <td>&nbsp;Deformează pe axa X</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Shift+Y</strong></td>\n"
#~ "                        <td>&nbsp;Deformează pe axa Y</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Alt+C</strong></td>\n"
#~ "                        <td>&nbsp;Unealta Calculatoare</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Alt+D</strong></td>\n"
#~ "                        <td>&nbsp;Unealta 2-Layer</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Alt+K</strong></td>\n"
#~ "                        <td>&nbsp;Unealta Dispensare Pasta Fludor</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Alt+L</strong></td>\n"
#~ "                        <td>&nbsp;Unealta Film PCB</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Alt+N</strong></td>\n"
#~ "                        <td>&nbsp;Unealta de curățare zone cupru</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Alt+P</strong></td>\n"
#~ "                        <td>&nbsp;Unealta Paint</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Alt+Q</strong></td>\n"
#~ "                        <td>&nbsp;Unealta de import PDF</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Alt+R</strong></td>\n"
#~ "                        <td>&nbsp;Unealta Transformări</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Alt+S</strong></td>\n"
#~ "                        <td>&nbsp;Vizualiz. Codul Sursa</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Alt+U</strong></td>\n"
#~ "                        <td>&nbsp;Unealta de Decupare</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Alt+1</strong></td>\n"
#~ "                        <td>&nbsp;Activează toate Afișările</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Alt+2</strong></td>\n"
#~ "                        <td>&nbsp;Dezactivează toate afişările/td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Alt+3</strong></td>\n"
#~ "                        <td>&nbsp;Dezactivează toate afişările "
#~ "neselectate</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Alt+F10</strong></td>\n"
#~ "                        <td>&nbsp;Comută Full Screen</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                       <td height=\"20\"><strong>Ctrl+Alt+X</strong></"
#~ "td>\n"
#~ "                        <td>&nbsp;Anuleaza taskul curent</td>\n"
#~ "                    </tr>                    \n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>F1</strong></td>\n"
#~ "                        <td>&nbsp;Deschide Manualul Online</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>F4</strong></td>\n"
#~ "                        <td>&nbsp;Deschide Tutoriale Online</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Del</strong></td>\n"
#~ "                        <td>&nbsp;Șterge Obiectul</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Del</strong></td>\n"
#~ "                        <td>&nbsp;Alternativ: Șterge Unealta</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>'`'</strong></td>\n"
#~ "                        <td>&nbsp;(in stânga Tasta_1)Comută Aria Notebook "
#~ "(in stânga)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>SPACE</strong></td>\n"
#~ "                        <td>&nbsp;(Dez)Activează afișare obiect</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Escape</strong></td>\n"
#~ "                        <td>&nbsp;Deselectează toate obiectele</td>\n"
#~ "                    </tr>\n"
#~ "                </tbody>\n"
#~ "            </table>\n"
#~ "    \n"
#~ "            "

#~ msgid ""
#~ "<b>Editor Shortcut list</b><br>\n"
#~ "            <br>\n"
#~ "            <strong><span style=\"color:#0000ff\">GEOMETRY EDITOR</span></"
#~ "strong><br>\n"
#~ "    \n"
#~ "            <table border=\"0\" cellpadding=\"0\" cellspacing=\"0\" style="
#~ "\"width:283px\">\n"
#~ "                <tbody>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\" width=\"89\"><strong>A</"
#~ "strong></td>\n"
#~ "                        <td width=\"194\">&nbsp;Draw an Arc</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>B</strong></td>\n"
#~ "                        <td>&nbsp;Buffer Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>C</strong></td>\n"
#~ "                        <td>&nbsp;Copy Geo Item</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>D</strong></td>\n"
#~ "                        <td>&nbsp;Within Add Arc will toogle the ARC "
#~ "direction: CW or CCW</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>E</strong></td>\n"
#~ "                        <td>&nbsp;Polygon Intersection Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>I</strong></td>\n"
#~ "                        <td>&nbsp;Paint Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>J</strong></td>\n"
#~ "                        <td>&nbsp;Jump to Location (x, y)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>K</strong></td>\n"
#~ "                        <td>&nbsp;Toggle Corner Snap</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>M</strong></td>\n"
#~ "                        <td>&nbsp;Move Geo Item</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>M</strong></td>\n"
#~ "                        <td>&nbsp;Within Add Arc will cycle through the "
#~ "ARC modes</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>N</strong></td>\n"
#~ "                        <td>&nbsp;Draw a Polygon</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>O</strong></td>\n"
#~ "                        <td>&nbsp;Draw a Circle</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>P</strong></td>\n"
#~ "                        <td>&nbsp;Draw a Path</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>R</strong></td>\n"
#~ "                        <td>&nbsp;Draw Rectangle</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>S</strong></td>\n"
#~ "                        <td>&nbsp;Polygon Substraction Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>T</strong></td>\n"
#~ "                        <td>&nbsp;Add Text Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>U</strong></td>\n"
#~ "                        <td>&nbsp;Polygon Union Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>X</strong></td>\n"
#~ "                        <td>&nbsp;Flip shape on X axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Y</strong></td>\n"
#~ "                        <td>&nbsp;Flip shape on Y axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Shift+X</strong></td>\n"
#~ "                        <td>&nbsp;Skew shape on X axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Shift+Y</strong></td>\n"
#~ "                        <td>&nbsp;Skew shape on Y axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Alt+R</strong></td>\n"
#~ "                        <td>&nbsp;Editor Transformation Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Alt+X</strong></td>\n"
#~ "                        <td>&nbsp;Offset shape on X axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Alt+Y</strong></td>\n"
#~ "                        <td>&nbsp;Offset shape on Y axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Ctrl+M</strong></td>\n"
#~ "                        <td>&nbsp;Measurement Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Ctrl+S</strong></td>\n"
#~ "                        <td>&nbsp;Save Object and Exit Editor</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Ctrl+X</strong></td>\n"
#~ "                        <td>&nbsp;Polygon Cut Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Space</strong></td>\n"
#~ "                        <td>&nbsp;Rotate Geometry</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ENTER</strong></td>\n"
#~ "                        <td>&nbsp;Finish drawing for certain tools</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ESC</strong></td>\n"
#~ "                        <td>&nbsp;Abort and return to Select</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Del</strong></td>\n"
#~ "                        <td>&nbsp;Delete Shape</td>\n"
#~ "                    </tr>\n"
#~ "                </tbody>\n"
#~ "            </table>\n"
#~ "            <br>\n"
#~ "            <br>\n"
#~ "            <strong><span style=\"color:#ff0000\">EXCELLON EDITOR</span></"
#~ "strong><br>\n"
#~ "            <table border=\"0\" cellpadding=\"0\" cellspacing=\"0\" style="
#~ "\"width:283px\">\n"
#~ "                <tbody>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\" width=\"89\"><strong>A</"
#~ "strong></td>\n"
#~ "                        <td width=\"194\">&nbsp;Add Drill Array</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>C</strong></td>\n"
#~ "                        <td>&nbsp;Copy Drill(s)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>D</strong></td>\n"
#~ "                        <td>&nbsp;Add Drill</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>J</strong></td>\n"
#~ "                        <td>&nbsp;Jump to Location (x, y)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>M</strong></td>\n"
#~ "                        <td>&nbsp;Move Drill(s)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\" width=\"89\"><strong>Q</"
#~ "strong></td>\n"
#~ "                        <td width=\"194\">&nbsp;Add Slot Array</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>R</strong></td>\n"
#~ "                        <td>&nbsp;Resize Drill(s)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>T</strong></td>\n"
#~ "                        <td>&nbsp;Add a new Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\" width=\"89\"><strong>W</"
#~ "strong></td>\n"
#~ "                        <td width=\"194\">&nbsp;Add Slot</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Del</strong></td>\n"
#~ "                        <td>&nbsp;Delete Drill(s)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Del</strong></td>\n"
#~ "                        <td>&nbsp;Alternate: Delete Tool(s)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ESC</strong></td>\n"
#~ "                        <td>&nbsp;Abort and return to Select</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Ctrl+S</strong></td>\n"
#~ "                        <td>&nbsp;Save Object and Exit Editor</td>\n"
#~ "                    </tr>\n"
#~ "                </tbody>\n"
#~ "            </table>\n"
#~ "            <br>\n"
#~ "            <br>\n"
#~ "            <strong><span style=\"color:#00ff00\">GERBER EDITOR</span></"
#~ "strong><br>\n"
#~ "            <table border=\"0\" cellpadding=\"0\" cellspacing=\"0\" style="
#~ "\"width:283px\">\n"
#~ "                <tbody>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\" width=\"89\"><strong>A</"
#~ "strong></td>\n"
#~ "                        <td width=\"194\">&nbsp;Add Pad Array</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>B</strong></td>\n"
#~ "                        <td>&nbsp;Buffer</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>C</strong></td>\n"
#~ "                        <td>&nbsp;Copy</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>D</strong></td>\n"
#~ "                        <td>&nbsp;Add Disc</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>E</strong></td>\n"
#~ "                        <td>&nbsp;Add SemiDisc</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>J</strong></td>\n"
#~ "                        <td>&nbsp;Jump to Location (x, y)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>M</strong></td>\n"
#~ "                        <td>&nbsp;Move</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>N</strong></td>\n"
#~ "                        <td>&nbsp;Add Region</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>P</strong></td>\n"
#~ "                        <td>&nbsp;Add Pad</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>R</strong></td>\n"
#~ "                        <td>&nbsp;Within Track & Region Tools will cycle "
#~ "in REVERSE the bend modes</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>S</strong></td>\n"
#~ "                        <td>&nbsp;Scale</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>T</strong></td>\n"
#~ "                        <td>&nbsp;Add Track</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>T</strong></td>\n"
#~ "                        <td>&nbsp;Within Track & Region Tools will cycle "
#~ "FORWARD the bend modes</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Del</strong></td>\n"
#~ "                        <td>&nbsp;Delete</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Del</strong></td>\n"
#~ "                        <td>&nbsp;Alternate: Delete Apertures</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ESC</strong></td>\n"
#~ "                        <td>&nbsp;Abort and return to Select</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Ctrl+E</strong></td>\n"
#~ "                        <td>&nbsp;Eraser Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Ctrl+S</strong></td>\n"
#~ "                        <td>&nbsp;Save Object and Exit Editor</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                     <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Alt+A</strong></td>\n"
#~ "                        <td>&nbsp;Mark Area Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Alt+N</strong></td>\n"
#~ "                        <td>&nbsp;Poligonize Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Alt+R</strong></td>\n"
#~ "                        <td>&nbsp;Transformation Tool</td>\n"
#~ "                    </tr>\n"
#~ "                </tbody>\n"
#~ "            </table>\n"
#~ "                    "
#~ msgstr ""
#~ "<b>Lista de teste shortcut in Editor</b><br>\n"
#~ "            <br>\n"
#~ "            <strong><span style=\"color:#0000ff\">EDITOR GEOMETRII</"
#~ "span></strong><br>\n"
#~ "    \n"
#~ "            <table border=\"0\" cellpadding=\"0\" cellspacing=\"0\" style="
#~ "\"width:283px\">\n"
#~ "                <tbody>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\" width=\"89\"><strong>A</"
#~ "strong></td>\n"
#~ "                        <td width=\"194\">&nbsp;Deseneaza un arc</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>B</strong></td>\n"
#~ "                        <td>&nbsp;Unealta Bufer</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>C</strong></td>\n"
#~ "                        <td>&nbsp;Copiază o geometrie</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>D</strong></td>\n"
#~ "                        <td>&nbsp;Pt cazul Adauga Arc va schimba directia "
#~ "curbei: CW sau CCW</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>E</strong></td>\n"
#~ "                        <td>&nbsp;Unealta Intersectie Poligoane</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>I</strong></td>\n"
#~ "                        <td>&nbsp;Unealta Paint</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>J</strong></td>\n"
#~ "                        <td>&nbsp;Sari la locatie (x, y)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>K</strong></td>\n"
#~ "                        <td>&nbsp;Comută magnet colt</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>M</strong></td>\n"
#~ "                        <td>&nbsp;Muta geometrie</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>M</strong></td>\n"
#~ "                        <td>&nbsp;Pt cazul Adauga Arc va parcurge "
#~ "modurile de realizare a curbelor</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>N</strong></td>\n"
#~ "                        <td>&nbsp;Deseneaza un Poligon</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>O</strong></td>\n"
#~ "                        <td>&nbsp;Deseneaza un Cerc</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>P</strong></td>\n"
#~ "                        <td>&nbsp;Deseneaza o Cale</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>R</strong></td>\n"
#~ "                        <td>&nbsp;Deseneaza un Patrulater</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>S</strong></td>\n"
#~ "                        <td>&nbsp;Unealta de Substractie Poligoane</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>T</strong></td>\n"
#~ "                        <td>&nbsp;Unealta de adaugare Text</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>U</strong></td>\n"
#~ "                        <td>&nbsp;Unealta de Uniune Poligoane</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>X</strong></td>\n"
#~ "                        <td>&nbsp;Oglindire pe axa X</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Y</strong></td>\n"
#~ "                        <td>&nbsp;Oglindire pe axa Y</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Shift+X</strong></td>\n"
#~ "                        <td>&nbsp;Deformeaza pe axa X</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Shift+Y</strong></td>\n"
#~ "                        <td>&nbsp;Deformeaza pe axa Y</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Alt+R</strong></td>\n"
#~ "                        <td>&nbsp;Unealta Transformare din Editor</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Alt+X</strong></td>\n"
#~ "                        <td>&nbsp;Deplaseaza pe axa X</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Alt+Y</strong></td>\n"
#~ "                        <td>&nbsp;Deplaseaza pe axa Y</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Ctrl+M</strong></td>\n"
#~ "                        <td>&nbsp;Unealta de masurare</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Ctrl+S</strong></td>\n"
#~ "                        <td>&nbsp;Inchide Editorul</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Ctrl+X</strong></td>\n"
#~ "                        <td>&nbsp;Unealta de Decupare Poligoane</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Space</strong></td>\n"
#~ "                        <td>&nbsp;Roteste geometria</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ENTER</strong></td>\n"
#~ "                        <td>&nbsp;Finalizeaza desenul pt anumite tipuri "
#~ "de geo.</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ESC</strong></td>\n"
#~ "                        <td>&nbsp;Renunță si revino la Unealta Selectie</"
#~ "td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Del</strong></td>\n"
#~ "                        <td>&nbsp;Sterge geometrie</td>\n"
#~ "                    </tr>\n"
#~ "                </tbody>\n"
#~ "            </table>\n"
#~ "            <br>\n"
#~ "            <br>\n"
#~ "            <strong><span style=\"color:#ff0000\">EDITOR EXCELLON</span></"
#~ "strong><br>\n"
#~ "            <table border=\"0\" cellpadding=\"0\" cellspacing=\"0\" style="
#~ "\"width:283px\">\n"
#~ "                <tbody>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\" width=\"89\"><strong>A</"
#~ "strong></td>\n"
#~ "                        <td width=\"194\">&nbsp;Adauga o arie de gauri</"
#~ "td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>C</strong></td>\n"
#~ "                        <td>&nbsp;Copiază gauri</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>D</strong></td>\n"
#~ "                        <td>&nbsp;Adauga o gaura</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>J</strong></td>\n"
#~ "                        <td>&nbsp;Sari la locatia (x, y)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>M</strong></td>\n"
#~ "                        <td>&nbsp;Muta gauri</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\" width=\"89\"><strong>Q</"
#~ "strong></td>\n"
#~ "                        <td width=\"194\">&nbsp;Adăugați Arie de sloturi</"
#~ "td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>R</strong></td>\n"
#~ "                        <td>&nbsp;Redimensioneaza gauri</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>T</strong></td>\n"
#~ "                        <td>&nbsp;Adauga o noua unealta</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\" width=\"89\"><strong>W</"
#~ "strong></td>\n"
#~ "                        <td width=\"194\">&nbsp;Adăugați slot</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Del</strong></td>\n"
#~ "                        <td>&nbsp;Sterge gauri</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Del</strong></td>\n"
#~ "                        <td>&nbsp;Alternativ: Sterge Unelte</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ESC</strong></td>\n"
#~ "                        <td>&nbsp;Renunță si revino la Unealta de "
#~ "Selectie</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Ctrl+S</strong></td>\n"
#~ "                        <td>&nbsp;Inchide Editorul</td>\n"
#~ "                    </tr>\n"
#~ "                </tbody>\n"
#~ "            </table>\n"
#~ "            <br>\n"
#~ "            <br>\n"
#~ "            <strong><span style=\"color:#00ff00\">EDITOR GERBER</span></"
#~ "strong><br>\n"
#~ "            <table border=\"0\" cellpadding=\"0\" cellspacing=\"0\" style="
#~ "\"width:283px\">\n"
#~ "                <tbody>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\" width=\"89\"><strong>A</"
#~ "strong></td>\n"
#~ "                        <td width=\"194\">&nbsp;Adauga o arie de Paduri</"
#~ "td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>B</strong></td>\n"
#~ "                        <td>&nbsp;Bufer</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>C</strong></td>\n"
#~ "                        <td>&nbsp;Copiere</td>\n"
#~ "                    </tr>\n"
#~ "                <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>D</strong></td>\n"
#~ "                        <td>&nbsp;Adauga Disc</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>J</strong></td>\n"
#~ "                        <td>&nbsp;Sari la locatia (x, y)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>M</strong></td>\n"
#~ "                        <td>&nbsp;Muta</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>N</strong></td>\n"
#~ "                        <td>&nbsp;Adauga Regiune</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>P</strong></td>\n"
#~ "                        <td>&nbsp;Adauga Pad</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>R</strong></td>\n"
#~ "                        <td>&nbsp;In uneltele Traseu si Regiune va "
#~ "parcurge in Revers modurile de indoire</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>S</strong></td>\n"
#~ "                        <td>&nbsp;Scalare</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>T</strong></td>\n"
#~ "                        <td>&nbsp;Adauga Traseu</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>R</strong></td>\n"
#~ "                        <td>&nbsp;In uneltele Traseu si Regiune va "
#~ "parcurge in Avans modurile de indoire</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Del</strong></td>\n"
#~ "                        <td>&nbsp;Stergere</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Del</strong></td>\n"
#~ "                        <td>&nbsp;Alternativ: Sterge aperturi</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ESC</strong></td>\n"
#~ "                        <td>&nbsp;Renunță si revino la Unealta Selectie</"
#~ "td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Ctrl+E</strong></td>\n"
#~ "                        <td>&nbsp;Unealta Radieră</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Ctrl+S</strong></td>\n"
#~ "                        <td>&nbsp;Inchide Editorul</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Alt+A</strong></td>\n"
#~ "                        <td>&nbsp;Unealta Marcare Arii</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Alt+N</strong></td>\n"
#~ "                        <td>&nbsp;Unealta Poligonizare</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Alt+R</strong></td>\n"
#~ "                        <td>&nbsp;Unealta Transformare</td>\n"
#~ "                    </tr>\n"
#~ "                </tbody>\n"
#~ "            </table>\n"
#~ "                    "

#~ msgid "[success] Done."
#~ msgstr "[success] Executat."

#~ msgid "[WARNING_NOTCL] Cancelled."
#~ msgstr "[WARNING_NOTCL] Anulat."

#~ msgid "[success] Added new tool with dia: {dia} {units}"
#~ msgstr "[success] O noua unealtă este adăugată cu diametrul: {dia} {units}"

#~ msgid "[WARNING_NOTCL] Application is saving the project. Please wait ..."
#~ msgstr ""
#~ "[WARNING_NOTCL] Aplicația salvează proiectul. Vă rugăm aşteptați ..."

#~ msgid "<b>%s:</b>"
#~ msgstr "<b>%s:</b>"

#~ msgid "%s:"
#~ msgstr "%s:"

#~ msgid "Object not found: %s"
#~ msgstr "Obiectul nu a fost gasit: %s"

#~ msgid "[success] Opened: %s"
#~ msgstr "[success] Incărcat: %s"

#~ msgid "[success] Paint All Done."
#~ msgstr "[success] 'Paint' pt toate poligoanele a fost efectuata."

#~ msgid ""
#~ "Could not do Paint All. Try a different combination of parameters. Or a "
#~ "different Method of paint\n"
#~ "%s"
#~ msgstr ""
#~ "Nu s-a putut efectua op. 'Paint' pt toate poligoanele. Incearcă o "
#~ "combinaţie diferita de parametri. Sau încearcă o alta metoda de 'pictat'\n"
#~ "%s"

#~ msgid "[success] Paint Area Done."
#~ msgstr "[success] 'Paint' pt poligoanele intr-o arie a fost efectuată."

#~ msgid "Generating panel ... Please wait."
#~ msgstr "Se generează panelul ... Va rugăm asteptati."

#~ msgid "...processing... [%s]"
#~ msgstr "...in procesare... [%s]"

#~ msgid "Parsing aperture %s geometry ..."
#~ msgstr "Se analizează geo pt. apertura: %s..."

#~ msgid "[success] Skew on the %s axis done ..."
#~ msgstr "[success] Deformarea pe axa %s executată ..."

#~ msgid "[ERROR_NOTCL] Could not load defaults file."
#~ msgstr ""
#~ "[ERROR_NOTCL] Nu a fost posibilă incărcarea fişierului cu valori default."

#~ msgid "[ERROR_NOTCL] Failed to parse defaults file."
#~ msgstr "[ERROR_NOTCL] Parsarea fişierului cu valori default a eșuat."

#~ msgid "[ERROR_NOTCL] An internal error has ocurred. See shell.\n"
#~ msgstr ""
#~ "[ERROR_NOTCL] A apărut o eroare internă. Verifică in TCL Shell pt mai "
#~ "multe detalii.\n"

#~ msgid "[success] Defaults saved."
#~ msgstr "[success] Valorile default au fost salvate."

#~ msgid "[success] Converted units to %s"
#~ msgstr "[success] Conversie unitati la %s"

#~ msgid "[WARNING_NOTCL] Export Code cancelled."
#~ msgstr "[WARNING_NOTCL Exportul GCode este anulat."

#~ msgid "[success] Origin set ..."
#~ msgstr "[success] Originea a fost setată ..."

#~ msgid "[success] Skew on X axis done."
#~ msgstr "[success] Deformare pe axa X executată."

#~ msgid "[success] Skew on Y axis done."
#~ msgstr "[success] Deformare pe axa Y executată."

#~ msgid "[success] New Grid added ..."
#~ msgstr "[success] O noua valoare pt Grila a fost adăugată..."

#~ msgid "[WARNING_NOTCL] Open Gerber cancelled."
#~ msgstr "[WARNING_NOTCL] Incărcarea unui fişier Gerber este anulată."

#~ msgid "[WARNING_NOTCL] Open G-Code cancelled."
#~ msgstr "[WARNING_NOTCL] Incărcarea unui fişier G-Code este anulată."

#~ msgid "[WARNING_NOTCL] Open Project cancelled."
#~ msgstr "[WARNING_NOTCL] Incărcarea unui Proiect a fost anulată."

#~ msgid "[WARNING_NOTCL] Open Config cancelled."
#~ msgstr "[WARNING_NOTCL] Incărcarea unui fişier de Configurare este anulată."

#~ msgid "[WARNING_NOTCL] No object selected."
#~ msgstr "[WARNING_NOTCL] Nici-un obiect selectat."

#~ msgid "[WARNING_NOTCL] Export SVG cancelled."
#~ msgstr "[WARNING_NOTCL] Exportul SVG este anulat."

#~ msgid "[WARNING_NOTCL] Export Excellon cancelled."
#~ msgstr "[WARNING_NOTCL] Exportul Excellon anulat."

#~ msgid "[WARNING_NOTCL] Export Gerber cancelled."
#~ msgstr "[WARNING_NOTCL] Exportul Gerber este anulat."

#~ msgid "[WARNING_NOTCL] Export DXF cancelled."
#~ msgstr "[WARNING_NOTCL] Exportul DXF anulat."

#~ msgid "[WARNING_NOTCL] Open SVG cancelled."
#~ msgstr "[WARNING_NOTCL] Importul SVG anulat."

#~ msgid "[WARNING_NOTCL] Open DXF cancelled."
#~ msgstr "[WARNING_NOTCL] Incărcarea fişier DXF anulată."

#~ msgid "[WARNING_NOTCL] No object Box. Using instead %s"
#~ msgstr ""
#~ "[WARNING_NOTCL] Nu este nici-un container Box pentru obiect. Se foloseşte "
#~ "%s"

#~ msgid "[ERROR_NOTCL] Failed to parse file: {name}. {error}"
#~ msgstr "[ERROR_NOTCL] Eşec in parsarea fişierului: {name}. {error}"

#~ msgid "[ERROR_NOTCL] An internal error has occurred. See shell.\n"
#~ msgstr ""
#~ "[ERROR_NOTCL]  A apărut o eroare interna. Verifică in TCL Shell pt mai "
#~ "multe detalii.\n"

#~ msgid "[ERROR_NOTCL] Failed to verify project file: %s. Retry to save it."
#~ msgstr ""
#~ "[ERROR_NOTCL] Verificarea proiectului salvat a eșuat: %s. Incearcă să il "
#~ "salvezi din nou."

#~ msgid ""
#~ "[ERROR_NOTCL] Failed to parse saved project file: %s. Retry to save it."
#~ msgstr ""
#~ "[ERROR_NOTCL] Parsarea proiectului salvat a eșuat: %s. Incearcă să il "
#~ "salvezi din nou."

#~ msgid "[ERROR_NOTCL] Failed to save project file: %s. Retry to save it."
#~ msgstr ""
#~ "[ERROR_NOTCL] Salvarea proiectului a eșuat: %s. Incearcă să il salvezi "
#~ "din nou."

#~ msgid "[ERROR_NOTCL] Wrong value format entered, use a number."
#~ msgstr ""
#~ "[ERROR_NOTCL] O valoare gresita a fost introdusa. Foloseşte un număr."

#~ msgid "[ERROR_NOTCL] Cancelled. Empty file, it has no geometry..."
#~ msgstr "[ERROR_NOTCL] Anulat. Fişier gol, nu are date geometrice."

#~ msgid "[WARNING_NOTCL] Export Machine Code cancelled ..."
#~ msgstr "[WARNING_NOTCL] Exportul codului masina CNC a fost anulat ..."

#~ msgid "[WARNING_NOTCL] No such file or directory"
#~ msgstr "[WARNING_NOTCL] Nu exista un asemenea fişier sau director"

#~ msgid "[ERROR_NOTCL] The value is mistyped. Check the value. %s"
#~ msgstr "[ERROR_NOTCL] Valoarea este gresita. Verifică valoarea. %s"

#~ msgid "[ERROR_NOTCL] Cancelled."
#~ msgstr "[ERROR_NOTCL] Anulat."

#~ msgid "Tool Dia:"
#~ msgstr "Dia. Unealtă:"

#~ msgid "Nr of drills:"
#~ msgstr "Nr. op. găurire"

#~ msgid "Direction:"
#~ msgstr "Direcţie:"

#~ msgid "Pitch:"
#~ msgstr "Pas:"

#~ msgid "Length:"
#~ msgstr "Lungime:"

#~ msgid "Nr of slots:"
#~ msgstr "Nr de sloturi:"

#~ msgid "[success] Deleted tool with dia: {del_dia} {units}"
#~ msgstr "[success] Unealta stearsa cu diametrul: {del_dia} {units}"

#~ msgid "Tool dia:"
#~ msgstr "Dia unealtă:"

#~ msgid "Overlap Rate:"
#~ msgstr "Rata suprapunere:"

#~ msgid "Method:"
#~ msgstr "Metoda:"

#~ msgid "[ERROR_NOTCL] Wrong value format entered for Rotate, use a number."
#~ msgstr ""
#~ "[ERROR_NOTCL] Valoare incorecta intodusa pentru Rotaţie, foloseşte un "
#~ "număr Real."

#~ msgid "[ERROR_NOTCL] Wrong value format entered for Skew X, use a number."
#~ msgstr ""
#~ "[ERROR_NOTCL] Valoare incorecta intodusa pentru Deformare X, foloseşte un "
#~ "număr Real."

#~ msgid "[ERROR_NOTCL] Wrong value format entered for Skew Y, use a number."
#~ msgstr ""
#~ "[ERROR_NOTCL] Valoare incorecta intodusa pentru Deformare Y, foloseşte un "
#~ "număr Real."

#~ msgid "[ERROR_NOTCL] Wrong value format entered for Scale X, use a number."
#~ msgstr ""
#~ "[ERROR_NOTCL] Valoare incorecta intodusa pentru Scalare X, foloseşte un "
#~ "număr Real."

#~ msgid "[ERROR_NOTCL] Wrong value format entered for Scale Y, use a number."
#~ msgstr ""
#~ "[ERROR_NOTCL] Valoare incorecta intodusa pentru Scalare Y, foloseşte un "
#~ "număr Real."

#~ msgid "[ERROR_NOTCL] Wrong value format entered for Offset X, use a number."
#~ msgstr ""
#~ "[ERROR_NOTCL] Valoare incorecta intodusa pentru Ofset pe X, foloseşte un "
#~ "număr Real."

#~ msgid "[ERROR_NOTCL] Wrong value format entered for Offset Y, use a number."
#~ msgstr ""
#~ "[ERROR_NOTCL] Valoare incorecta intodusa pentru Ofset pe Y, foloseşte un "
#~ "număr Real."

#~ msgid "[success] Flip on the Y axis done ..."
#~ msgstr "Oglindirea pe axa X efectuata ..."

#~ msgid "[success] Flip on the X axis done ..."
#~ msgstr "Oglindirea pe axa Y efectuata ..."

#~ msgid "[success] Offset on the %s axis done ..."
#~ msgstr "[success] Deplasarea pe axa %s executată ..."

#~ msgid ""
#~ "[WARNING_NOTCL] Editing MultiGeo Geometry, tool: {tool} with diameter: "
#~ "{dia}"
#~ msgstr ""
#~ "[WARNING_NOTCL] Se editeaza un obiect tip Geometrie MultiGeo , unealta: "
#~ "{tool} cu diametrul: {dia}"

#~ msgid "Clear GUI Settings:"
#~ msgstr "Șterge setările GUI:"

#~ msgid "Duration:"
#~ msgstr "Durata:"

#~ msgid "Fast Plunge:"
#~ msgstr "Plonjare rapida:"

#~ msgid "Linear Dir.:"
#~ msgstr "Dir. Lineara:"

#~ msgid "Plot kind:"
#~ msgstr "Tip afișare:"

#~ msgid ""
#~ "Select from the Tools Table above\n"
#~ "the tools you want to include."
#~ msgstr ""
#~ "Selectează din Tabela de Unelte de mai sus,\n"
#~ "uneltele care trebuie incluse."

#~ msgid ""
#~ "[WARNING_NOTCL] Tool Diameter is zero value. Change it to a positive real "
#~ "number."
#~ msgstr ""
#~ "[WARNING_NOTCL] Diametrul uneltei este zero. Schimbă-l intr-o val. "
#~ "pozitivă Reala."

#~ msgid "[success] Gerber %s was mirrored..."
#~ msgstr "[success]Obiectul Gerberr %s a fost oglindit..."

#~ msgid "[success] Excellon %s was mirrored..."
#~ msgstr "[success] Obiectul Excellon %s a fost oglindit..."

#~ msgid "[success] Geometry %s was mirrored..."
#~ msgstr "[success] Obiectul Geometrie %s a fost oglindit..."

#~ msgid "[WARNING_NOTCL] No object(s) selected."
#~ msgstr "[WARNING_NOTCL] Nu sunt obiecte selectate."

#~ msgid "[success] %s object was moved ..."
#~ msgstr "[success] Obiectul %s a fost mutat ..."

#~ msgid "[WARNING_NOTCL] Object(s) not selected"
#~ msgstr "[WARNING_NOTCL] Obiectele nu sunt selectate."

#~ msgid "[WARNING_NOTCL] Buffering ..."
#~ msgstr "[WARNING_NOTCL] Buffering ..."

#~ msgid "[success] Non-Copper Clearing with ToolDia = %s started."
#~ msgstr ""
#~ "[success] Curățarea de Cupru in exces cu Dia Unealtă = %s a inceput."

#~ msgid "[ERROR_NOTCL] NCCTool.clear_non_copper() --> %s"
#~ msgstr "[ERROR_NOTCL] NCCTool.clear_non_copper() --> %s"

#~ msgid "[success] NCC Tool finished."
#~ msgstr "[success] Unealta NCC s-a terminat."

#~ msgid ""
#~ "[WARNING_NOTCL] NCC Tool finished but some PCB features could not be "
#~ "cleared. Check the result."
#~ msgstr ""
#~ "[WARNING_NOTCL] Unealta NCC a terminat lucrul dar unele zone PCB nu au "
#~ "putut fi curățate de Cu. Verifică rezultatul."

#~ msgid "[success] Non-Copper Rest Clearing with ToolDia = %s started."
#~ msgstr ""
#~ "[success] Curățarea de Cupru tip Rest cu dia unealtă = %s a inceput.."

#~ msgid "[ERROR_NOTCL] NCCTool.clear_non_copper_rest() --> %s"
#~ msgstr "[ERROR_NOTCL] NCCTool.clear_non_copper_rest() --> %s"

#~ msgid ""
#~ "[ERROR_NOTCL] NCC Tool finished but could not clear the object with "
#~ "current settings."
#~ msgstr ""
#~ "[ERROR_NOTCL] Unealta NCC a termiant lucrul dar nu a fost posibil sa fie "
#~ "curățată de Cu obiectul cu setările curente."

#~ msgid "[WARNING_NOTCL] Open PDF cancelled."
#~ msgstr "[WARNING_NOTCL] Incărcarea fişier PDF anulată."

#~ msgid "[ERROR_NOTCL] Open PDF file failed."
#~ msgstr "[ERROR_NOTCL] Deschiderea unui fişier PDF a eșuat."

#~ msgid "[success] Rendered: %s"
#~ msgstr "[success] Analizat: %s"

#~ msgid ""
#~ "How to select the polygons to paint.<BR>Options:<BR>- <B>Single Polygons</"
#~ "B>: left mouse click on the polygon to be painted.<BR>- <B>Area "
#~ "Selection</B>: left mouse click to start selection of the area to be "
#~ "painted.<BR>- <B>All Polygons</B>: paint all polygons.<BR>- <B>Reference "
#~ "Object</B>: paint an area described by an external reference object."
#~ msgstr ""
#~ "Cum să selectați poligoanele de pictat. <BR>Opțiuni: <BR>-<B> Poligoane "
#~ "individuale </B>: faceți clic stânga cu mouse pe poligonul care urmează "
#~ "să fie pictat. <BR>-<B>Selecția zonei</B>: faceți clic stânga cu mouse-ul "
#~ "pentru a începe selecția zonei care urmează să fie pictată. <BR>-<B> "
#~ "Toate poligoanele </B>: pictați toate poligoanele. <BR>-<B>Obiect de "
#~ "referință</B>: pictați o zonă descrisă de un obiect de referință extern."

#~ msgid ""
#~ "[ERROR_NOTCL] There is no Painting Geometry in the file.\n"
#~ "Usually it means that the tool diameter is too big for the painted "
#~ "geometry.\n"
#~ "Change the painting parameters and try again."
#~ msgstr ""
#~ "[ERROR_NOTCL] Nu exista o geometrie 'pictata' in acest fişier.\n"
#~ "De obicei aceasta inseamna că diametrul uneltei este prea mare \n"
#~ "pt a fi folosit in obiectul Geometrie de 'pictat'.\n"
#~ "Schimbă parametrii de 'pictat' și încearcă din nou."

#~ msgid "[WARNING_NOTCL]No object Box. Using instead %s"
#~ msgstr ""
#~ "[WARNING_NOTCL] Nu este disponibil nici-un container Box pentru obiect. "
#~ "Se foloseşte %s"

#~ msgid "[success] Imported: %s"
#~ msgstr "[success] Importat: %s"

#~ msgid "[ERROR_NOTCL] Generating new object failed."
#~ msgstr "[ERROR_NOTCL] Generarea unui nou obiect a eșuat."

#~ msgid "[success] Created: %s"
#~ msgstr "[success] Creat: %s"

#~ msgid "[success] Rotate done ..."
#~ msgstr "[success] Rotaţie executată ..."

#~ msgid ""
#~ "When choosing the 'Itself' option the non copper clearing extent\n"
#~ "is based on the object that is copper cleared.\n"
#~ " Choosing the 'Box' option will do non copper clearing within the box\n"
#~ "specified by another object different than the one that is copper cleared."
#~ msgstr ""
#~ "Atunci când alegeți opțiunea „Însuși”, intinderea suprafeței curățate de "
#~ "Cu\n"
#~ "se bazează pe obiectul care este curățat de cupru.\n"
#~ "Alegerea opțiunii „Cutie” va efectua o curățare fără cupru\n"
#~ "în cadrul delimitarii specificate de un alt obiect diferit de cel care "
#~ "este curățat de cupru."

#~ msgid ""
#~ "How to select the polygons to paint.<BR>Options:<BR>- <B>Single</B>: left "
#~ "mouse click on the polygon to be painted.<BR>- <B>Area</B>: left mouse "
#~ "click to start selection of the area to be painted.<BR>- <B>All</B>: "
#~ "paint all polygons.<BR>- <B>Ref</B>: paint an area described by an "
#~ "external reference object."
#~ msgstr ""
#~ "Cum se selectează poligoanele de pictat. <BR>Opțiuni: <BR>-<B> Singur </"
#~ "B>: faceți clic stânga cu mouse-ul pe poligonul care urmează să fie "
#~ "pictat. <BR>-<B> Zona </B>: faceți clic stânga cu mouse pentru a începe "
#~ "selecția zonei care urmează să fie pictată. <BR>-<B> Toate </B>: pictați "
#~ "toate poligonele. <BR>-<B> Ref </B>: pictați o zonă descrisă de un obiect "
#~ "de referință extern."

#~ msgid "Geometry object to be painted.                        "
#~ msgstr "Obiectul tip Geometrie care să fie 'pictat'"

#~ msgid ""
#~ "After clicking here, click inside<BR>the polygon you wish to be painted "
#~ "if <B>Single</B> is selected.<BR>If <B>Area</B> is selected, then the "
#~ "selection of the area to be painted<BR>will be initiated by a first click "
#~ "and finished by the second mouse click.<BR>If <B>All</B>  is selected "
#~ "then the Paint will start after click.<BR>If <B>Ref</B>  is selected then "
#~ "the Paint will start after click,<BR>and the painted area will be "
#~ "described by a selected object.<BR>A new Geometry object with the tool "
#~ "paths will be created."
#~ msgstr ""
#~ "După ce faceți clic aici, faceți clic pe <BR> poligonul pe care doriți să "
#~ "fie pictat dacă este selectat <B> Single </B>. <BR>Dacă <B> Zonă</B> este "
#~ "selectat, atunci selecţia zonei pentru fi pictată <BR>va fi inițiată cu "
#~ "un prim clic și finalizată cu al doilea clic al mouse-ului. <BR>Dacă <B> "
#~ "Toate </B> este selectat, atunci Paint va începe după clic. <BR>Dacă <B> "
#~ "Ref </B> este selectat apoi pictarea va începe după clic, <BR>, iar zona "
#~ "pictată va fi descrisă de un obiect selectat. <BR>Un nou obiect Geometrie "
#~ "cu traseele uneltei va fi creat."

#~ msgid "<b>Apertures:</b>"
#~ msgstr "<b>Aperturi:</b>"

#~ msgid "Aperture Code:"
#~ msgstr "Cod apertură"

#~ msgid "<b>Languages:</b>"
#~ msgstr "<b>Traduceri:</b>"

#~ msgid "Width (# passes):"
#~ msgstr "Latime(# treceri):"

#~ msgid "Clear non-copper"
#~ msgstr "Curăță non-Cu"

#~ msgid "Rounded corners"
#~ msgstr "C. rotunjite"

#~ msgid ""
#~ "Creates a Geometry objects with polygons\n"
#~ "covering the copper-free areas of the PCB."
#~ msgstr ""
#~ "Crează un obiect tip Geometrie conținând poligoane\n"
#~ "care acopera toate suprafetele libere de cupru ale PCB-ului."

#~ msgid "<b>Bounding Box:</b>"
#~ msgstr "<b>Forma înconjurătoare::</b>"

#~ msgid "<b>Units</b>:"
#~ msgstr "<b>Unitati</b>:"

#~ msgid "<b>Zeros</b>:"
#~ msgstr "<b>Zero-uri</b>:"

#~ msgid "INCH:"
#~ msgstr "Inch"

#~ msgid "Tool change:"
#~ msgstr "Schimbare unealtă:"

#~ msgid "Toolchange Z position."
#~ msgstr ""
#~ "Înălţimea la care se efectuează schimbarea uneltei.\n"
#~ "Poate reprezenta Înălţimea unde se gaseste un\n"
#~ "'toolchanger' automat sau acolo unde utilizatorul\n"
#~ "schimba unealtă manual."

#~ msgid ""
#~ "Tool speed while drilling\n"
#~ "(in units per minute)."
#~ msgstr ""
#~ "Viteza cu care se misca unealtă (burghiul) când se fac\n"
#~ "operațiuni de găurire. In unitati pe minut."

#~ msgid "<b>Gcode:    </b>"
#~ msgstr "<b>G-Code:</b>"

#~ msgid "Offset Z:"
#~ msgstr "Z ofset:"

#~ msgid "<b>Slots:</b>"
#~ msgstr "<b>Sloturi:</b>"

#~ msgid "<b>Create CNC Job:</b>"
#~ msgstr "<b>Crează CNCJob:</b>"

#~ msgid "Multidepth"
#~ msgstr "MultiPas"

#~ msgid "Multidepth usage: True or False."
#~ msgstr ""
#~ "Dacă se folosesc sau nu pasi multipli de tăiere\n"
#~ "pentru a ajunge la adâncimea de tăiere."

#~ msgid ""
#~ "The preprocessor file that dictates\n"
#~ "Machine Code output."
#~ msgstr ""
#~ "Un fişier care prelucrează codul G-Code astfel încât să\n"
#~ "respecte un anumit format care să fie ințeles de diverse\n"
#~ "utilaje. Este responsabil de 'personalizarea' G-Code."

#~ msgid "Display Annotation:"
#~ msgstr "Afiseaza notatii:"

#~ msgid ""
#~ "Type here any G-Code commands you would\n"
#~ "like to be executed when Toolchange event is encountered.\n"
#~ "This will constitute a Custom Toolchange GCode,\n"
#~ "or a Toolchange Macro."
#~ msgstr ""
#~ "Adaugă aici orice comenzi G-Code care se dorește să fie\n"
#~ "inserate in codul G-Code atunci când se intalneste comanda M6.\n"
#~ "Comanda M6 este inlocuita.\n"
#~ "Aceata va constitui un macro pentru schimbul uneltelor."

#~ msgid ""
#~ "If checked, use 'rest machining'.\n"
#~ "Basically it will clear copper outside PCB features,\n"
#~ "using the biggest tool and continue with the next tools,\n"
#~ "from bigger to smaller, to clear areas of copper that\n"
#~ "could not be cleared by previous tool.\n"
#~ "If not checked, use the standard algorithm."
#~ msgstr ""
#~ "Daca este bifat, foloste 'rest machining'.\n"
#~ "Mai exact, se va curăța cuprul din afara traseelor,\n"
#~ "folosind mai intai unealta cu diametrul cel mai mare\n"
#~ "apoi folosindu-se progresiv unelte cu diametrul tot\n"
#~ "mai mic, din cele disponibile in tabela de unelte, pt a\n"
#~ "curăța zonele care nu s-au putut curăța cu unealta\n"
#~ "precedenta.\n"
#~ "Daca nu este bifat, foloseşte algoritmul standard."

#~ msgid "Offset:"
#~ msgstr "Ofset:"

#~ msgid ""
#~ "Distance from objects at which\n"
#~ "to draw the cutout."
#~ msgstr "Distanta de obiecte la care să se deseneze forma taietoare."

#~ msgid ""
#~ "Size of the gaps in the toolpath\n"
#~ "that will remain to hold the\n"
#~ "board in place."
#~ msgstr ""
#~ "Dimensiunea punţilor in trecerile de tăiere\n"
#~ "care vor mentine PCB-ul in poziţie, fără să cada\n"
#~ "din placa 'mama' dupa decupare."

#~ msgid "Create a convex shape surrounding the entire PCB."
#~ msgstr ""
#~ "Generează un obiect tip Geometrie care va inconjura\n"
#~ "tot PCB-ul. Forma sa este convexa."

#~ msgid ""
#~ "The axis should pass through a <b>point</b> or cut\n"
#~ " a specified <b>box</b> (in a Geometry object) in \n"
#~ "the middle."
#~ msgstr ""
#~ "Axa de referinţă ar trebui să treaca printr-un <b>punct</b> ori să "
#~ "strabata\n"
#~ " o <b>forma</b> (specificata un obiect tip Geometrie) prin mijloc."

#~ msgid "Panel Type:"
#~ msgstr "Tip panel:"

#~ msgid "Tip angle:"
#~ msgstr "Unghiul la vârf:"

#~ msgid "Angle for rotation. In degrees."
#~ msgstr "Unnghiul pentru rotaţie. In grade."

#~ msgid "Angle for Skew/Shear on X axis. In degrees."
#~ msgstr "Unghiul pentru deformare pe axa X. In grade."

#~ msgid "Angle for Skew/Shear on Y axis. In degrees."
#~ msgstr "Unghiul pentru deformare pe axa Y. In grade."

#~ msgid "XY Toolchange:"
#~ msgstr "XY schimb unealtă:"

#~ msgid "PostProcessors:"
#~ msgstr "Postprocesoare:"

#~ msgid "<b>Scale:</b>"
#~ msgstr "<b>Scalează:</b>"

#~ msgid "<b>Offset:</b>"
#~ msgstr "<b>Ofset:</b>"

#~ msgid "<b>Tools Table</b>"
#~ msgstr "<b>Tabela Unelte</b>"

#~ msgid ""
#~ "Tool height just before starting the work.\n"
#~ "Delete the value if you don't need this feature."
#~ msgstr ""
#~ "Înălţimea uneltei la inceputul lucrului.\n"
#~ "Seterge aceasta valoare daca nu este folosita."

#~ msgid ""
#~ "Z-axis position (height) for\n"
#~ "the last move."
#~ msgstr "Înălţimea, pe axa Z, la finalul lucrului."

#~ msgid ""
#~ "The json file that dictates\n"
#~ "gcode output."
#~ msgstr ""
#~ "Fişierul care dictează codul G-Code \n"
#~ "generat. In format JSON."

#~ msgid "<b>Type:    </b>"
#~ msgstr "<b>Tip:</b>"

#~ msgid "Drills Tool dia:"
#~ msgstr "Dia. Burghiu:"

#~ msgid "Slots Tool dia:"
#~ msgstr "Dia freza:"

#~ msgid "<b>Tool Dia:</b>"
#~ msgstr "<b>Dia unealtă:</b>"

#~ msgid "<b>Tool Data</b>"
#~ msgstr "<b>Date Unealtă</b>"

#~ msgid ""
#~ "This is the height (Z) at which the CNC\n"
#~ "will go as the last move."
#~ msgstr ""
#~ "Aceasta este înălţimea Z, la care CNC-ul \n"
#~ "va fi parcat la finalul de lucru."

#~ msgid "Feed Rate Z (Plunge):"
#~ msgstr "Feedrate Z (Plonjare):"

#~ msgid ""
#~ "Cutting speed in the Z\n"
#~ "plane in units per minute"
#~ msgstr ""
#~ "Viteza de tăiere in planul Z.\n"
#~ "In unitati pe minut."

#~ msgid ""
#~ "Cutting speed in the XY\n"
#~ "plane in units per minute\n"
#~ "(in units per minute).\n"
#~ "This is for the rapid move G00.\n"
#~ "It is useful only for Marlin,\n"
#~ "ignore for any other cases."
#~ msgstr ""
#~ "Viteza de găurire, in unitati pe minut.\n"
#~ "Corespunde comenzii G0 și este utila doar pentru\n"
#~ "printerul 3D Marlin, implicit când se foloseşte fişierul\n"
#~ "postprocesor: Marlin. Ignora aceasta parametru in rest."

#~ msgid "Cut over 1st pt"
#~ msgstr "Re-tăiere 1-ul pt."

#~ msgid "<b>Paint Area:</b>"
#~ msgstr "<b>Unealta Paint</b>"

#~ msgid "<b>CNC Tools Table</b>"
#~ msgstr "<b>Tabela Unelte CNC</b>"

#~ msgid ""
#~ "Type here any G-Code commands you would\n"
#~ "like to add to the beginning of the generated file."
#~ msgstr ""
#~ "Plasează aici acele comenzi GCode care se dorește să fie\n"
#~ "adaugate la inceputul codului masina CNC."

#~ msgid ""
#~ "This is the diameter of the tool tip.\n"
#~ "The manufacturer specifies it."
#~ msgstr ""
#~ "Acesta este diametrul uneltei la vârf.\n"
#~ "Producatorul il specifica in foaia de catalog."

#~ msgid "Object:"
#~ msgstr "Obiect:"

#~ msgid "Units:"
#~ msgstr "Unităti:"

#~ msgid ""
#~ "- 'Itself': the non copper clearing extent\n"
#~ "is based on the object that is copper cleared.\n"
#~ " - 'Box': will do non copper clearing within the box\n"
#~ "specified by the object selected in the Ref. Object combobox."
#~ msgstr ""
#~ "- „Însuși”: intinderea suprafeței de curățare a cuprului\n"
#~ "se bazează pe obiectul care este curățat de cupru.\n"
#~ "- „Cutie”: va efectua o curățare de cupru în suprafața\n"
#~ "specificată de obiectul selectat în combobox-ul Obiect Ref.."

#~ msgid "Geometry:"
#~ msgstr "Geometrie:"

#~ msgid ""
#~ "Scale the selected object(s)\n"
#~ "using the Scale Factor X for both axis."
#~ msgstr ""
#~ "Scalează obiectele selectate\n"
#~ "folosind Factor X de scalare pentru\n"
#~ "ambele axe."

#~ msgid "<b>Excellon Format:</b>"
#~ msgstr "<b>Formatul Excellon</b>"

#~ msgid "<b>Tools:</b>"
#~ msgstr "<b>Unelte:</b>"

#~ msgid "<b>Export G-Code:</b>"
#~ msgstr "<b>Exporta G-Code:</b>"

#~ msgid "How to select the polygons to paint."
#~ msgstr "Cum să se selecteze poligoanele de pictat (paint)."

#~ msgid "<b>V-Shape Tool Calculator:</b>"
#~ msgstr "<b>Calculator: Unealta V-shape</b>"

#~ msgid "<b>ElectroPlating Calculator:</b>"
#~ msgstr "<b>Calculator Electroplacare:</b>"

#~ msgid "<b>Name:</b>"
#~ msgstr "<b>Nume:</b>"

#~ msgid "<b>Plot kind:</b>"
#~ msgstr "<b>Afișare:</b>"

#~ msgid "<b>Display Annotation:</b>"
#~ msgstr "<b>Afișare notatii:</b>"

#~ msgid "<b>GERBER:</b>"
#~ msgstr "<b>GERBER:</b>"

#~ msgid "<b>EXCELLON:</b>"
#~ msgstr "<b>EXCELLON:</b>"

#~ msgid "<b>GEOMETRY</b>:"
#~ msgstr "<b>GEOMETRIE</b>:"

#~ msgid "<b>Panel Type:</b>"
#~ msgstr "<b>Tip panel:</b>"

#~ msgid "<b>Excellon format:</b>"
#~ msgstr "<b>Formatul Excellon</b>"

#~ msgid "<b>Gerber Objects</b>"
#~ msgstr "<b>Obiect Gerber</b>"

#~ msgid "<b>Geometry Objects</b>"
#~ msgstr "<b>Obiecte Geometrie</b>"

#~ msgid "Save &Defaults"
#~ msgstr "Salvează valori &Default"

#~ msgid "Tool dia:                   "
#~ msgstr "Dia Unealtă:"

#~ msgid ""
#~ "The diameter of the cutting\n"
#~ "tool.."
#~ msgstr "Diametrul uneltei taietoare ..."

#~ msgid "[WARNING_NOTCL] Move cancelled. No shape selected."
#~ msgstr "[WARNING_NOTCL] Mutare anulata. Nici-o forma nu este selectată."

#~ msgid "Copy as &Geom"
#~ msgstr "Copiază ca &Geo"

#~ msgid ""
#~ "Change the size of the selected apertures.\n"
#~ "Factor by which to multiply\n"
#~ "geometric features of this object."
#~ msgstr ""
#~ "Schimbă dimensiunea aperturilor selectate.\n"
#~ "Factor cu care se multiplica geometriile\n"
#~ "acestui obiect."

#~ msgid "Ap. Buffer Factor:"
#~ msgstr "Factor bufer ap.:"

#~ msgid ""
#~ "Change the size of the selected apertures.\n"
#~ "Factor by which to expand/shrink\n"
#~ "geometric features of this object."
#~ msgstr ""
#~ "Schimbă dimensiunea aperturilor selectate.\n"
#~ "Valoare cu care se mareste/micsorează\n"
#~ "geometriile acestui obiect."

#~ msgid "Out"
#~ msgstr "Afară"

#~ msgid "Pos"
#~ msgstr "Pozitiv"

#~ msgid "Neg"
#~ msgstr "Negativ"

#~ msgid "Solid   "
#~ msgstr "Solid"

#~ msgid "M-Color   "
#~ msgstr "M-Color   "

#~ msgid "Click on CENTER ..."
#~ msgstr "Click in Centru ..."

#~ msgid "[success] Done. Region completed."
#~ msgstr "[success] Executat. Adăugarea unei Regiuni terminată."

#~ msgid "Del Aperture:"
#~ msgstr "Șterge apertura:"

#~ msgid ""
#~ "Delete a aperture in the aperture list.\n"
#~ "It will delete also the associated geometry."
#~ msgstr ""
#~ "Sterge o apertură in lista de aperturi.\n"
#~ "Va sterge si geometriile asociate."

#~ msgid ""
#~ "[ERROR_NOTCL] The aperture scale factor value is missing or wrong format."
#~ msgstr ""
#~ "[ERROR_NOTCL] Factorul de scalare a aperturii lipseste sau este in format "
#~ "gresit."

#~ msgid ""
#~ "<b>Editor Shortcut list</b><br>\n"
#~ "            <br>\n"
#~ "            <strong><span style=\"color:#0000ff\">GEOMETRY EDITOR</span></"
#~ "strong><br>\n"
#~ "    \n"
#~ "            <table border=\"0\" cellpadding=\"0\" cellspacing=\"0\" style="
#~ "\"width:283px\">\n"
#~ "                <tbody>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\" width=\"89\"><strong>A</"
#~ "strong></td>\n"
#~ "                        <td width=\"194\">&nbsp;Draw an Arc</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>B</strong></td>\n"
#~ "                        <td>&nbsp;Buffer Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>C</strong></td>\n"
#~ "                        <td>&nbsp;Copy Geo Item</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>E</strong></td>\n"
#~ "                        <td>&nbsp;Polygon Intersection Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>I</strong></td>\n"
#~ "                        <td>&nbsp;Paint Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>J</strong></td>\n"
#~ "                        <td>&nbsp;Jump to Location (x, y)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>K</strong></td>\n"
#~ "                        <td>&nbsp;Toggle Corner Snap</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>M</strong></td>\n"
#~ "                        <td>&nbsp;Move Geo Item</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>N</strong></td>\n"
#~ "                        <td>&nbsp;Draw a Polygon</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>O</strong></td>\n"
#~ "                        <td>&nbsp;Draw a Circle</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>P</strong></td>\n"
#~ "                        <td>&nbsp;Draw a Path</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>R</strong></td>\n"
#~ "                        <td>&nbsp;Draw Rectangle</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>S</strong></td>\n"
#~ "                        <td>&nbsp;Polygon Substraction Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>T</strong></td>\n"
#~ "                        <td>&nbsp;Add Text Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>U</strong></td>\n"
#~ "                        <td>&nbsp;Polygon Union Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>X</strong></td>\n"
#~ "                        <td>&nbsp;Flip shape on X axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Y</strong></td>\n"
#~ "                        <td>&nbsp;Flip shape on Y axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Shift+X</strong></td>\n"
#~ "                        <td>&nbsp;Skew shape on X axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Shift+Y</strong></td>\n"
#~ "                        <td>&nbsp;Skew shape on Y axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Alt+R</strong></td>\n"
#~ "                        <td>&nbsp;Editor Transformation Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Alt+X</strong></td>\n"
#~ "                        <td>&nbsp;Offset shape on X axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Alt+Y</strong></td>\n"
#~ "                        <td>&nbsp;Offset shape on Y axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Ctrl+M</strong></td>\n"
#~ "                        <td>&nbsp;Measurement Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Ctrl+S</strong></td>\n"
#~ "                        <td>&nbsp;Save Object and Exit Editor</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Ctrl+X</strong></td>\n"
#~ "                        <td>&nbsp;Polygon Cut Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Space</strong></td>\n"
#~ "                        <td>&nbsp;Rotate Geometry</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ENTER</strong></td>\n"
#~ "                        <td>&nbsp;Finish drawing for certain tools</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ESC</strong></td>\n"
#~ "                        <td>&nbsp;Abort and return to Select</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Del</strong></td>\n"
#~ "                        <td>&nbsp;Delete Shape</td>\n"
#~ "                    </tr>\n"
#~ "                </tbody>\n"
#~ "            </table>\n"
#~ "            <br>\n"
#~ "            <br>\n"
#~ "            <strong><span style=\"color:#ff0000\">EXCELLON EDITOR</span></"
#~ "strong><br>\n"
#~ "            <table border=\"0\" cellpadding=\"0\" cellspacing=\"0\" style="
#~ "\"width:283px\">\n"
#~ "                <tbody>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\" width=\"89\"><strong>A</"
#~ "strong></td>\n"
#~ "                        <td width=\"194\">&nbsp;Add Drill Array</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>C</strong></td>\n"
#~ "                        <td>&nbsp;Copy Drill(s)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>D</strong></td>\n"
#~ "                        <td>&nbsp;Add Drill</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>J</strong></td>\n"
#~ "                        <td>&nbsp;Jump to Location (x, y)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>M</strong></td>\n"
#~ "                        <td>&nbsp;Move Drill(s)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>R</strong></td>\n"
#~ "                        <td>&nbsp;Resize Drill(s)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>T</strong></td>\n"
#~ "                        <td>&nbsp;Add a new Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Del</strong></td>\n"
#~ "                        <td>&nbsp;Delete Drill(s)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Del</strong></td>\n"
#~ "                        <td>&nbsp;Alternate: Delete Tool(s)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ESC</strong></td>\n"
#~ "                        <td>&nbsp;Abort and return to Select</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Ctrl+S</strong></td>\n"
#~ "                        <td>&nbsp;Save Object and Exit Editor</td>\n"
#~ "                    </tr>\n"
#~ "                </tbody>\n"
#~ "            </table>\n"
#~ "                    "
#~ msgstr ""
#~ "<b>Editor Shortcut list</b><br>\n"
#~ "            <br>\n"
#~ "            <strong><span style=\"color:#0000ff\">EDITORUL DE GEOMETRII</"
#~ "span></strong><br>\n"
#~ "    \n"
#~ "            <table border=\"0\" cellpadding=\"0\" cellspacing=\"0\" style="
#~ "\"width:283px\">\n"
#~ "                <tbody>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\" width=\"89\"><strong>A</"
#~ "strong></td>\n"
#~ "                        <td width=\"194\">&nbsp;Desenează un Arc</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>B</strong></td>\n"
#~ "                        <td>&nbsp;Unealta Bufer</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>C</strong></td>\n"
#~ "                        <td>&nbsp;Copiaza o geometrie</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>E</strong></td>\n"
#~ "                        <td>&nbsp;Unealta Intersecţie Poligoane</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>I</strong></td>\n"
#~ "                        <td>&nbsp;Unealta Paint</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>J</strong></td>\n"
#~ "                        <td>&nbsp;Sari la Locaţie (x, y)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>K</strong></td>\n"
#~ "                        <td>&nbsp;Comuta lipire colt</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>M</strong></td>\n"
#~ "                        <td>&nbsp;Muta forma geometrică</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>N</strong></td>\n"
#~ "                        <td>&nbsp;Desenează un Poligon</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>O</strong></td>\n"
#~ "                        <td>&nbsp;Desenează un Cerc</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>P</strong></td>\n"
#~ "                        <td>&nbsp;Desenează o Cale</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>R</strong></td>\n"
#~ "                        <td>&nbsp;Desenează un Patrulater</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>S</strong></td>\n"
#~ "                        <td>&nbsp;Unealta Substracţie Poligoane</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>T</strong></td>\n"
#~ "                        <td>&nbsp;Unealta de adaugare Text</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>U</strong></td>\n"
#~ "                        <td>&nbsp;Unealta de Uniune Poligoane</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>X</strong></td>\n"
#~ "                        <td>&nbsp;Oglindește forma geo pe axa X</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Y</strong></td>\n"
#~ "                        <td>&nbsp;Oglindește forma geo pe axa Y</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Shift+X</strong></td>\n"
#~ "                        <td>&nbsp;Deformează forma geo pe axa X/td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Shift+Y</strong></td>\n"
#~ "                        <td>&nbsp;Deformează forma geo pe axa Y</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Alt+R</strong></td>\n"
#~ "                        <td>&nbsp;Unealta de Trasformări din Editor</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Alt+X</strong></td>\n"
#~ "                        <td>&nbsp;Deplasează forma geo pe axa X</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Alt+Y</strong></td>\n"
#~ "                        <td>&nbsp;Deplasează forma geo pe axa Y</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Ctrl+M</strong></td>\n"
#~ "                        <td>&nbsp;Unealta de Masurare</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Ctrl+S</strong></td>\n"
#~ "                        <td>&nbsp;Salvează obiectul și ieși din Editor</"
#~ "td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Ctrl+X</strong></td>\n"
#~ "                        <td>&nbsp;Unealta de tăiere Poligoane</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Space</strong></td>\n"
#~ "                        <td>&nbsp;Roteste forma geometrică</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ENTER</strong></td>\n"
#~ "                        <td>&nbsp;Termina desenatul pentru anumite "
#~ "unelte</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ESC</strong></td>\n"
#~ "                        <td>&nbsp;Renunta și intoarce-te la Select</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Del</strong></td>\n"
#~ "                        <td>&nbsp;Șterge forma geometrică</td>\n"
#~ "                    </tr>\n"
#~ "                </tbody>\n"
#~ "            </table>\n"
#~ "            <br>\n"
#~ "            <br>\n"
#~ "            <strong><span style=\"color:#ff0000\">EDITORUL EXCELLON</"
#~ "span></strong><br>\n"
#~ "            <table border=\"0\" cellpadding=\"0\" cellspacing=\"0\" style="
#~ "\"width:283px\">\n"
#~ "                <tbody>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\" width=\"89\"><strong>A</"
#~ "strong></td>\n"
#~ "                        <td width=\"194\">&nbsp;Adaugă o arie de găuriri</"
#~ "td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>C</strong></td>\n"
#~ "                        <td>&nbsp;Copiaza Găuriri</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>D</strong></td>\n"
#~ "                        <td>&nbsp;Adaugă găurire</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>J</strong></td>\n"
#~ "                        <td>&nbsp;Sari la Locaţie (x, y)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>M</strong></td>\n"
#~ "                        <td>&nbsp;Muta Găuriri</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>R</strong></td>\n"
#~ "                        <td>&nbsp;Redimensionează găuriri</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>T</strong></td>\n"
#~ "                        <td>&nbsp;Adaugă o noua Unealta</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Del</strong></td>\n"
#~ "                        <td>&nbsp;Șterge Găuriri</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Del</strong></td>\n"
#~ "                        <td>&nbsp;Alternatic: Șterge Unelte</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ESC</strong></td>\n"
#~ "                        <td>&nbsp;Renunta și intoarce-te la Select</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Ctrl+S</strong></td>\n"
#~ "                        <td>&nbsp;Salvează obiectul și ieși din Editor</"
#~ "td>\n"
#~ "                    </tr>\n"
#~ "                </tbody>\n"
#~ "            </table>\n"
#~ "                    "

#~ msgid "Save && Close Edit"
#~ msgstr "Salvează && Inchide Edit"

#~ msgid "[success] GUI settings deleted ..."
#~ msgstr "[success] Setarile GUI au fost șterse ..."

#~ msgid "Perform scaling operation on the selected apertures."
#~ msgstr "Efectuează operatia de scalare pt aperturile selectate."

#~ msgid "Buffer Factor:"
#~ msgstr "Factor bufer:"

#~ msgid "Perform buffer operation on the selected apertures."
#~ msgstr "Efectuează operatia de bufer pt aperturile selectate."

#~ msgid "<b>Generate new Gerber Object:</b>"
#~ msgstr "<b>Crează un nou obiect Gerber::</b>"

#~ msgid "Will generate a new Gerber object from the changed apertures."
#~ msgstr "Va crea un nou obiect tip Gerber din aperturile modificate."

#~ msgid ""
#~ "Will generate a new Gerber object from the changed apertures.\n"
#~ "This new object can then be isolated etc."
#~ msgstr ""
#~ "Va genera un nou obiect Gerber din aperturile modificate.\n"
#~ "Acest nou obiect poate fi izolat etc."

#~ msgid "[ERROR_NOTCL]Could not load defaults file."
#~ msgstr ""
#~ "[ERROR_NOTCL] Nu a fost posibila incarcarea fişierului cu valori default."

#~ msgid "[WARNING_NOTCL]Export Machine Code cancelled ..."
#~ msgstr "[WARNING_NOTCL] Exportul de cod CNC a fost anulat ..."

#~ msgid "[success]Offset on the %s axis done ..."
#~ msgstr "[success] Deplasarea de axa %s executată."

#~ msgid ""
#~ "How much (fraction) of the tool width to overlap each tool pass.\n"
#~ "Example:\n"
#~ "A value here of 0.25 means 25\\% from the tool diameter found above.\n"
#~ "\n"
#~ "Adjust the value starting with lower values\n"
#~ "and increasing it if areas that should be painted are still \n"
#~ "not painted.\n"
#~ "Lower values = faster processing, faster execution on PCB.\n"
#~ "Higher values = slow processing and slow execution on CNC\n"
#~ "due of too many paths."
#~ msgstr ""
#~ "Cat de mult (fractie) din diametrul uneltei sa se suprapuna la fiecare "
#~ "trecere a uneltei.\n"
#~ "Exemplu:\n"
#~ "O valoare aici de 0.25 inseamna 25\\% din diametrul uneltei de mai sus.\n"
#~ "\n"
#~ "Ajusteaza valoarea incepand de la valori mici si pe urma creste daca "
#~ "ariile care ar trebui\n"
#~ " >pictate< inca nu sunt procesate.\n"
#~ "Valori scazute = procesare rapida,executie rapida a PCB-ului.\n"
#~ "Valori mari= procesare lenta cat si o executie la fel de lenta a PCB-"
#~ "ului,\n"
#~ "datorita numarului mai mare de treceri-taiere."

#, fuzzy
#~| msgid "z_toolchange = Z coord for Toolchange"
#~ msgid "z_move = Z coord for Toolchange"
#~ msgstr "z_toolchange = Z coord for Toolchange"

#~ msgid "%s/Project_%s"
#~ msgstr "%s/Proiect_%s"

#~ msgid "tool_tab"
#~ msgstr "tool_tab"