FlatCAM/locale/en/LC_MESSAGES/strings.po

# SOME DESCRIPTIVE TITLE.
# Copyright (C) YEAR ORGANIZATION
# FIRST AUTHOR <EMAIL@ADDRESS>, YEAR.
#
msgid ""
msgstr ""
"Project-Id-Version: \n"
"POT-Creation-Date: 2020-05-18 19:19+0300\n"
"PO-Revision-Date: 2020-05-18 19:19+0300\n"
"Last-Translator: \n"
"Language-Team: \n"
"Language: en\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Generated-By: pygettext.py 1.5\n"
"X-Generator: Poedit 2.3.1\n"
"Plural-Forms: nplurals=2; plural=(n != 1);\n"
"X-Poedit-Basepath: ../../..\n"
"X-Poedit-SearchPath-0: .\n"
"X-Poedit-SearchPathExcluded-0: build\n"
"X-Poedit-SearchPathExcluded-1: doc\n"
"X-Poedit-SearchPathExcluded-2: tests\n"

#: AppDatabase.py:86
msgid "Add Geometry Tool in DB"
msgstr "Add Geometry Tool in DB"

#: AppDatabase.py:88 AppDatabase.py:1643
msgid ""
"Add a new tool in the Tools Database.\n"
"It will be used in the Geometry UI.\n"
"You can edit it after it is added."
msgstr ""
"Add a new tool in the Tools Database.\n"
"It will be used in the Geometry UI.\n"
"You can edit it after it is added."

#: AppDatabase.py:102 AppDatabase.py:1657
msgid "Delete Tool from DB"
msgstr "Delete Tool from DB"

#: AppDatabase.py:104 AppDatabase.py:1659
msgid "Remove a selection of tools in the Tools Database."
msgstr "Remove a selection of tools in the Tools Database."

#: AppDatabase.py:108 AppDatabase.py:1663
msgid "Export DB"
msgstr "Export DB"

#: AppDatabase.py:110 AppDatabase.py:1665
msgid "Save the Tools Database to a custom text file."
msgstr "Save the Tools Database to a custom text file."

#: AppDatabase.py:114 AppDatabase.py:1669
msgid "Import DB"
msgstr "Import DB"

#: AppDatabase.py:116 AppDatabase.py:1671
msgid "Load the Tools Database information's from a custom text file."
msgstr "Load the Tools Database information's from a custom text file."

#: AppDatabase.py:120 AppDatabase.py:1681
msgid "Add Tool from Tools DB"
msgstr "Add Tool from Tools DB"

#: AppDatabase.py:122 AppDatabase.py:1683
msgid ""
"Add a new tool in the Tools Table of the\n"
"active Geometry object after selecting a tool\n"
"in the Tools Database."
msgstr ""
"Add a new tool in the Tools Table of the\n"
"active Geometry object after selecting a tool\n"
"in the Tools Database."

#: AppDatabase.py:128 AppDatabase.py:1689 AppGUI/MainGUI.py:1345
#: AppGUI/preferences/PreferencesUIManager.py:942 App_Main.py:2225
#: App_Main.py:3096 App_Main.py:3970 App_Main.py:4529 App_Main.py:6588
msgid "Cancel"
msgstr "Cancel"

#: AppDatabase.py:158 AppDatabase.py:833 AppDatabase.py:1087
msgid "Tool Name"
msgstr "Tool Name"

#: AppDatabase.py:159 AppDatabase.py:835 AppDatabase.py:1100
#: AppEditors/FlatCAMExcEditor.py:1604 AppGUI/ObjectUI.py:1447
#: AppGUI/ObjectUI.py:1685
#: AppGUI/preferences/tools/ToolsPaintPrefGroupUI.py:132
#: AppTools/ToolNCC.py:278 AppTools/ToolNCC.py:287 AppTools/ToolPaint.py:260
msgid "Tool Dia"
msgstr "Tool Dia"

#: AppDatabase.py:160 AppDatabase.py:837 AppDatabase.py:1281
#: AppGUI/ObjectUI.py:1660
msgid "Tool Offset"
msgstr "Tool Offset"

#: AppDatabase.py:161 AppDatabase.py:839 AppDatabase.py:1298
msgid "Custom Offset"
msgstr "Custom Offset"

#: AppDatabase.py:162 AppDatabase.py:841 AppDatabase.py:1265
#: AppGUI/ObjectUI.py:309
#: AppGUI/preferences/gerber/GerberAdvOptPrefGroupUI.py:67
#: AppGUI/preferences/tools/ToolsNCCPrefGroupUI.py:53
#: AppGUI/preferences/tools/ToolsPaintPrefGroupUI.py:62
#: AppGUI/preferences/tools/ToolsPaintPrefGroupUI.py:72 AppTools/ToolNCC.py:213
#: AppTools/ToolNCC.py:227 AppTools/ToolPaint.py:195
msgid "Tool Type"
msgstr "Tool Type"

#: AppDatabase.py:163 AppDatabase.py:843 AppDatabase.py:1113
msgid "Tool Shape"
msgstr "Tool Shape"

#: AppDatabase.py:164 AppDatabase.py:846 AppDatabase.py:1129
#: AppGUI/ObjectUI.py:350 AppGUI/ObjectUI.py:900 AppGUI/ObjectUI.py:1805
#: AppGUI/ObjectUI.py:2466
#: AppGUI/preferences/excellon/ExcellonOptPrefGroupUI.py:93
#: AppGUI/preferences/geometry/GeometryOptPrefGroupUI.py:48
#: AppGUI/preferences/gerber/GerberAdvOptPrefGroupUI.py:107
#: AppGUI/preferences/tools/ToolsCalculatorsPrefGroupUI.py:78
#: AppGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:58
#: AppGUI/preferences/tools/ToolsNCCPrefGroupUI.py:98
#: AppGUI/preferences/tools/ToolsPaintPrefGroupUI.py:105
#: AppGUI/preferences/tools/ToolsPaintPrefGroupUI.py:113
#: AppTools/ToolCalculators.py:114 AppTools/ToolCutOut.py:138
#: AppTools/ToolNCC.py:260 AppTools/ToolNCC.py:268 AppTools/ToolPaint.py:242
msgid "Cut Z"
msgstr "Cut Z"

#: AppDatabase.py:165 AppDatabase.py:848 AppDatabase.py:1143
msgid "MultiDepth"
msgstr "MultiDepth"

#: AppDatabase.py:166 AppDatabase.py:850 AppDatabase.py:1156
msgid "DPP"
msgstr "DPP"

#: AppDatabase.py:167 AppDatabase.py:852 AppDatabase.py:1312
msgid "V-Dia"
msgstr "V-Dia"

#: AppDatabase.py:168 AppDatabase.py:854 AppDatabase.py:1326
msgid "V-Angle"
msgstr "V-Angle"

#: AppDatabase.py:169 AppDatabase.py:856 AppDatabase.py:1170
#: AppGUI/ObjectUI.py:946 AppGUI/ObjectUI.py:1852
#: AppGUI/preferences/excellon/ExcellonOptPrefGroupUI.py:134
#: AppGUI/preferences/geometry/GeometryOptPrefGroupUI.py:101
#: AppGUI/preferences/tools/Tools2CalPrefGroupUI.py:61
#: AppObjects/FlatCAMExcellon.py:1396 AppObjects/FlatCAMGeometry.py:1660
#: AppTools/ToolCalibration.py:74
msgid "Travel Z"
msgstr "Travel Z"

#: AppDatabase.py:170 AppDatabase.py:858
msgid "FR"
msgstr "FR"

#: AppDatabase.py:171 AppDatabase.py:860
msgid "FR Z"
msgstr "FR Z"

#: AppDatabase.py:172 AppDatabase.py:862 AppDatabase.py:1340
msgid "FR Rapids"
msgstr "FR Rapids"

#: AppDatabase.py:173 AppDatabase.py:864 AppDatabase.py:1213
#: AppGUI/preferences/excellon/ExcellonOptPrefGroupUI.py:222
msgid "Spindle Speed"
msgstr "Spindle Speed"

#: AppDatabase.py:174 AppDatabase.py:866 AppDatabase.py:1228
#: AppGUI/ObjectUI.py:1064 AppGUI/ObjectUI.py:1959
msgid "Dwell"
msgstr "Dwell"

#: AppDatabase.py:175 AppDatabase.py:868 AppDatabase.py:1241
msgid "Dwelltime"
msgstr "Dwelltime"

#: AppDatabase.py:176 AppDatabase.py:870 AppGUI/ObjectUI.py:2116
#: AppGUI/preferences/excellon/ExcellonOptPrefGroupUI.py:257
#: AppGUI/preferences/geometry/GeometryOptPrefGroupUI.py:254
#: AppGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:237
#: AppTools/ToolSolderPaste.py:335
msgid "Preprocessor"
msgstr "Preprocessor"

#: AppDatabase.py:177 AppDatabase.py:872 AppDatabase.py:1356
msgid "ExtraCut"
msgstr "ExtraCut"

#: AppDatabase.py:178 AppDatabase.py:874 AppDatabase.py:1371
msgid "E-Cut Length"
msgstr "E-Cut Length"

#: AppDatabase.py:179 AppDatabase.py:876
msgid "Toolchange"
msgstr "Toolchange"

#: AppDatabase.py:180 AppDatabase.py:878
msgid "Toolchange XY"
msgstr "Toolchange XY"

#: AppDatabase.py:181 AppDatabase.py:880
#: AppGUI/preferences/excellon/ExcellonOptPrefGroupUI.py:160
#: AppGUI/preferences/geometry/GeometryOptPrefGroupUI.py:131
#: AppGUI/preferences/tools/Tools2CalPrefGroupUI.py:98
#: AppTools/ToolCalibration.py:111
msgid "Toolchange Z"
msgstr "Toolchange Z"

#: AppDatabase.py:182 AppDatabase.py:882 AppGUI/ObjectUI.py:1193
#: AppGUI/preferences/excellon/ExcellonAdvOptPrefGroupUI.py:69
#: AppGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:54
msgid "Start Z"
msgstr "Start Z"

#: AppDatabase.py:183 AppDatabase.py:885
msgid "End Z"
msgstr "End Z"

#: AppDatabase.py:187
msgid "Tool Index."
msgstr "Tool Index."

#: AppDatabase.py:189 AppDatabase.py:1089
msgid ""
"Tool name.\n"
"This is not used in the app, it's function\n"
"is to serve as a note for the user."
msgstr ""
"Tool name.\n"
"This is not used in the app, it's function\n"
"is to serve as a note for the user."

#: AppDatabase.py:193 AppDatabase.py:1102
msgid "Tool Diameter."
msgstr "Tool Diameter."

#: AppDatabase.py:195 AppDatabase.py:1283
msgid ""
"Tool Offset.\n"
"Can be of a few types:\n"
"Path = zero offset\n"
"In = offset inside by half of tool diameter\n"
"Out = offset outside by half of tool diameter\n"
"Custom = custom offset using the Custom Offset value"
msgstr ""
"Tool Offset.\n"
"Can be of a few types:\n"
"Path = zero offset\n"
"In = offset inside by half of tool diameter\n"
"Out = offset outside by half of tool diameter\n"
"Custom = custom offset using the Custom Offset value"

#: AppDatabase.py:202 AppDatabase.py:1300
msgid ""
"Custom Offset.\n"
"A value to be used as offset from the current path."
msgstr ""
"Custom Offset.\n"
"A value to be used as offset from the current path."

#: AppDatabase.py:205 AppDatabase.py:1267
msgid ""
"Tool Type.\n"
"Can be:\n"
"Iso = isolation cut\n"
"Rough = rough cut, low feedrate, multiple passes\n"
"Finish = finishing cut, high feedrate"
msgstr ""
"Tool Type.\n"
"Can be:\n"
"Iso = isolation cut\n"
"Rough = rough cut, low feedrate, multiple passes\n"
"Finish = finishing cut, high feedrate"

#: AppDatabase.py:211 AppDatabase.py:1115
msgid ""
"Tool Shape. \n"
"Can be:\n"
"C1 ... C4 = circular tool with x flutes\n"
"B = ball tip milling tool\n"
"V = v-shape milling tool"
msgstr ""
"Tool Shape. \n"
"Can be:\n"
"C1 ... C4 = circular tool with x flutes\n"
"B = ball tip milling tool\n"
"V = v-shape milling tool"

#: AppDatabase.py:217 AppDatabase.py:1131
msgid ""
"Cutting Depth.\n"
"The depth at which to cut into material."
msgstr ""
"Cutting Depth.\n"
"The depth at which to cut into material."

#: AppDatabase.py:220 AppDatabase.py:1145
msgid ""
"Multi Depth.\n"
"Selecting this will allow cutting in multiple passes,\n"
"each pass adding a DPP parameter depth."
msgstr ""
"Multi Depth.\n"
"Selecting this will allow cutting in multiple passes,\n"
"each pass adding a DPP parameter depth."

#: AppDatabase.py:224 AppDatabase.py:1158
msgid ""
"DPP. Depth per Pass.\n"
"The value used to cut into material on each pass."
msgstr ""
"DPP. Depth per Pass.\n"
"The value used to cut into material on each pass."

#: AppDatabase.py:227 AppDatabase.py:1314
msgid ""
"V-Dia.\n"
"Diameter of the tip for V-Shape Tools."
msgstr ""
"V-Dia.\n"
"Diameter of the tip for V-Shape Tools."

#: AppDatabase.py:230 AppDatabase.py:1328
msgid ""
"V-Agle.\n"
"Angle at the tip for the V-Shape Tools."
msgstr ""
"V-Agle.\n"
"Angle at the tip for the V-Shape Tools."

#: AppDatabase.py:233 AppDatabase.py:1172
msgid ""
"Clearance Height.\n"
"Height at which the milling bit will travel between cuts,\n"
"above the surface of the material, avoiding all fixtures."
msgstr ""
"Clearance Height.\n"
"Height at which the milling bit will travel between cuts,\n"
"above the surface of the material, avoiding all fixtures."

#: AppDatabase.py:237
msgid ""
"FR. Feedrate\n"
"The speed on XY plane used while cutting into material."
msgstr ""
"FR. Feedrate\n"
"The speed on XY plane used while cutting into material."

#: AppDatabase.py:240
msgid ""
"FR Z. Feedrate Z\n"
"The speed on Z plane."
msgstr ""
"FR Z. Feedrate Z\n"
"The speed on Z plane."

#: AppDatabase.py:243 AppDatabase.py:1342
msgid ""
"FR Rapids. Feedrate Rapids\n"
"Speed used while moving as fast as possible.\n"
"This is used only by some devices that can't use\n"
"the G0 g-code command. Mostly 3D printers."
msgstr ""
"FR Rapids. Feedrate Rapids\n"
"Speed used while moving as fast as possible.\n"
"This is used only by some devices that can't use\n"
"the G0 g-code command. Mostly 3D printers."

#: AppDatabase.py:248 AppDatabase.py:1215
msgid ""
"Spindle Speed.\n"
"If it's left empty it will not be used.\n"
"The speed of the spindle in RPM."
msgstr ""
"Spindle Speed.\n"
"If it's left empty it will not be used.\n"
"The speed of the spindle in RPM."

#: AppDatabase.py:252 AppDatabase.py:1230
msgid ""
"Dwell.\n"
"Check this if a delay is needed to allow\n"
"the spindle motor to reach it's set speed."
msgstr ""
"Dwell.\n"
"Check this if a delay is needed to allow\n"
"the spindle motor to reach it's set speed."

#: AppDatabase.py:256 AppDatabase.py:1243
msgid ""
"Dwell Time.\n"
"A delay used to allow the motor spindle reach it's set speed."
msgstr ""
"Dwell Time.\n"
"A delay used to allow the motor spindle reach it's set speed."

#: AppDatabase.py:259
msgid ""
"Preprocessor.\n"
"A selection of files that will alter the generated G-code\n"
"to fit for a number of use cases."
msgstr ""
"Preprocessor.\n"
"A selection of files that will alter the generated G-code\n"
"to fit for a number of use cases."

#: AppDatabase.py:263 AppDatabase.py:1358
msgid ""
"Extra Cut.\n"
"If checked, after a isolation is finished an extra cut\n"
"will be added where the start and end of isolation meet\n"
"such as that this point is covered by this extra cut to\n"
"ensure a complete isolation."
msgstr ""
"Extra Cut.\n"
"If checked, after a isolation is finished an extra cut\n"
"will be added where the start and end of isolation meet\n"
"such as that this point is covered by this extra cut to\n"
"ensure a complete isolation."

#: AppDatabase.py:269 AppDatabase.py:1373
msgid ""
"Extra Cut length.\n"
"If checked, after a isolation is finished an extra cut\n"
"will be added where the start and end of isolation meet\n"
"such as that this point is covered by this extra cut to\n"
"ensure a complete isolation. This is the length of\n"
"the extra cut."
msgstr ""
"Extra Cut length.\n"
"If checked, after a isolation is finished an extra cut\n"
"will be added where the start and end of isolation meet\n"
"such as that this point is covered by this extra cut to\n"
"ensure a complete isolation. This is the length of\n"
"the extra cut."

#: AppDatabase.py:276
msgid ""
"Toolchange.\n"
"It will create a toolchange event.\n"
"The kind of toolchange is determined by\n"
"the preprocessor file."
msgstr ""
"Toolchange.\n"
"It will create a toolchange event.\n"
"The kind of toolchange is determined by\n"
"the preprocessor file."

#: AppDatabase.py:281
msgid ""
"Toolchange XY.\n"
"A set of coordinates in the format (x, y).\n"
"Will determine the cartesian position of the point\n"
"where the tool change event take place."
msgstr ""
"Toolchange XY.\n"
"A set of coordinates in the format (x, y).\n"
"Will determine the cartesian position of the point\n"
"where the tool change event take place."

#: AppDatabase.py:286
msgid ""
"Toolchange Z.\n"
"The position on Z plane where the tool change event take place."
msgstr ""
"Toolchange Z.\n"
"The position on Z plane where the tool change event take place."

#: AppDatabase.py:289
msgid ""
"Start Z.\n"
"If it's left empty it will not be used.\n"
"A position on Z plane to move immediately after job start."
msgstr ""
"Start Z.\n"
"If it's left empty it will not be used.\n"
"A position on Z plane to move immediately after job start."

#: AppDatabase.py:293
msgid ""
"End Z.\n"
"A position on Z plane to move immediately after job stop."
msgstr ""
"End Z.\n"
"A position on Z plane to move immediately after job stop."

#: AppDatabase.py:305 AppDatabase.py:682 AppDatabase.py:716 AppDatabase.py:1898
#: AppDatabase.py:2144 AppDatabase.py:2178
msgid "Could not load Tools DB file."
msgstr "Could not load Tools DB file."

#: AppDatabase.py:313 AppDatabase.py:724 AppDatabase.py:1906
#: AppDatabase.py:2186
msgid "Failed to parse Tools DB file."
msgstr "Failed to parse Tools DB file."

#: AppDatabase.py:316 AppDatabase.py:727 AppDatabase.py:1909
#: AppDatabase.py:2189
msgid "Loaded FlatCAM Tools DB from"
msgstr "Loaded FlatCAM Tools DB from"

#: AppDatabase.py:322 AppDatabase.py:1823
msgid "Add to DB"
msgstr "Add to DB"

#: AppDatabase.py:324 AppDatabase.py:1826
msgid "Copy from DB"
msgstr "Copy from DB"

#: AppDatabase.py:326 AppDatabase.py:1829
msgid "Delete from DB"
msgstr "Delete from DB"

#: AppDatabase.py:603 AppDatabase.py:2044
msgid "Tool added to DB."
msgstr "Tool added to DB."

#: AppDatabase.py:624 AppDatabase.py:2077
msgid "Tool copied from Tools DB."
msgstr "Tool copied from Tools DB."

#: AppDatabase.py:642 AppDatabase.py:2104
msgid "Tool removed from Tools DB."
msgstr "Tool removed from Tools DB."

#: AppDatabase.py:653 AppDatabase.py:2115
msgid "Export Tools Database"
msgstr "Export Tools Database"

#: AppDatabase.py:656 AppDatabase.py:2118
msgid "Tools_Database"
msgstr "Tools_Database"

#: AppDatabase.py:663 AppDatabase.py:709 AppDatabase.py:2125
#: AppDatabase.py:2171 AppEditors/FlatCAMExcEditor.py:1023
#: AppEditors/FlatCAMExcEditor.py:1091 AppEditors/FlatCAMTextEditor.py:223
#: AppGUI/MainGUI.py:2657 AppGUI/MainGUI.py:2873 AppGUI/MainGUI.py:3088
#: AppObjects/ObjectCollection.py:126 AppTools/ToolFilm.py:739
#: AppTools/ToolFilm.py:885 AppTools/ToolImage.py:247 AppTools/ToolMove.py:269
#: AppTools/ToolPcbWizard.py:301 AppTools/ToolPcbWizard.py:324
#: AppTools/ToolQRCode.py:791 AppTools/ToolQRCode.py:838 App_Main.py:1720
#: App_Main.py:2452 App_Main.py:2487 App_Main.py:2534 App_Main.py:4033
#: App_Main.py:6779 App_Main.py:6816 App_Main.py:6858 App_Main.py:6887
#: App_Main.py:6928 App_Main.py:6953 App_Main.py:7005 App_Main.py:7040
#: App_Main.py:7085 App_Main.py:7126 App_Main.py:7167 App_Main.py:7208
#: App_Main.py:7249 App_Main.py:7293 App_Main.py:7349 App_Main.py:7381
#: App_Main.py:7413 App_Main.py:7644 App_Main.py:7682 App_Main.py:7725
#: App_Main.py:7802 App_Main.py:7857 Bookmark.py:300 Bookmark.py:342
msgid "Cancelled."
msgstr "Cancelled."

#: AppDatabase.py:671 AppDatabase.py:2133 AppEditors/FlatCAMTextEditor.py:276
#: AppObjects/FlatCAMCNCJob.py:959 AppTools/ToolFilm.py:1016
#: AppTools/ToolFilm.py:1197 AppTools/ToolSolderPaste.py:1534 App_Main.py:2542
#: App_Main.py:8101 App_Main.py:8149 App_Main.py:8274 App_Main.py:8410
#: Bookmark.py:308
msgid ""
"Permission denied, saving not possible.\n"
"Most likely another app is holding the file open and not accessible."
msgstr ""
"Permission denied, saving not possible.\n"
"Most likely another app is holding the file open and not accessible."

#: AppDatabase.py:693 AppDatabase.py:696 AppDatabase.py:748 AppDatabase.py:2155
#: AppDatabase.py:2158 AppDatabase.py:2211
msgid "Failed to write Tools DB to file."
msgstr "Failed to write Tools DB to file."

#: AppDatabase.py:699 AppDatabase.py:2161
msgid "Exported Tools DB to"
msgstr "Exported Tools DB to"

#: AppDatabase.py:706 AppDatabase.py:2168
msgid "Import FlatCAM Tools DB"
msgstr "Import FlatCAM Tools DB"

#: AppDatabase.py:738 AppDatabase.py:913 AppDatabase.py:2200
#: AppDatabase.py:2418 AppObjects/FlatCAMGeometry.py:947
#: AppTools/ToolNCC.py:4015 AppTools/ToolNCC.py:4099 AppTools/ToolPaint.py:3558
#: AppTools/ToolPaint.py:3643 App_Main.py:5422 App_Main.py:5450
#: App_Main.py:5477 App_Main.py:5497
msgid "Tools Database"
msgstr "Tools Database"

#: AppDatabase.py:752 AppDatabase.py:2215
msgid "Saved Tools DB."
msgstr "Saved Tools DB."

#: AppDatabase.py:899 AppDatabase.py:2405
msgid "No Tool/row selected in the Tools Database table"
msgstr "No Tool/row selected in the Tools Database table"

#: AppDatabase.py:917 AppDatabase.py:2422
msgid "Cancelled adding tool from DB."
msgstr "Cancelled adding tool from DB."

#: AppDatabase.py:1018
msgid "Basic Geo Parameters"
msgstr "Basic Geo Parameters"

#: AppDatabase.py:1030
msgid "Advanced Geo Parameters"
msgstr "Advanced Geo Parameters"

#: AppDatabase.py:1042
msgid "NCC Parameters"
msgstr "NCC Parameters"

#: AppDatabase.py:1054
msgid "Paint Parameters"
msgstr "Paint Parameters"

#: AppDatabase.py:1185 AppGUI/ObjectUI.py:967 AppGUI/ObjectUI.py:1871
#: AppGUI/preferences/geometry/GeometryOptPrefGroupUI.py:185
#: AppGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:148
#: AppTools/ToolSolderPaste.py:253
msgid "Feedrate X-Y"
msgstr "Feedrate X-Y"

#: AppDatabase.py:1187
msgid ""
"Feedrate X-Y. Feedrate\n"
"The speed on XY plane used while cutting into material."
msgstr ""
"Feedrate X-Y. Feedrate\n"
"The speed on XY plane used while cutting into material."

#: AppDatabase.py:1199 AppGUI/ObjectUI.py:982 AppGUI/ObjectUI.py:1885
#: AppGUI/preferences/excellon/ExcellonOptPrefGroupUI.py:207
#: AppGUI/preferences/geometry/GeometryOptPrefGroupUI.py:200
#: AppGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:161
#: AppTools/ToolSolderPaste.py:265
msgid "Feedrate Z"
msgstr "Feedrate Z"

#: AppDatabase.py:1201
msgid ""
"Feedrate Z\n"
"The speed on Z plane."
msgstr ""
"Feedrate Z\n"
"The speed on Z plane."

#: AppDatabase.py:1399 AppGUI/ObjectUI.py:845
#: AppGUI/preferences/excellon/ExcellonOptPrefGroupUI.py:46
#: AppTools/ToolNCC.py:341
msgid "Operation"
msgstr "Operation"

#: AppDatabase.py:1401 AppTools/ToolNCC.py:343
msgid ""
"The 'Operation' can be:\n"
"- Isolation -> will ensure that the non-copper clearing is always complete.\n"
"If it's not successful then the non-copper clearing will fail, too.\n"
"- Clear -> the regular non-copper clearing."
msgstr ""
"The 'Operation' can be:\n"
"- Isolation -> will ensure that the non-copper clearing is always complete.\n"
"If it's not successful then the non-copper clearing will fail, too.\n"
"- Clear -> the regular non-copper clearing."

#: AppDatabase.py:1408 AppEditors/FlatCAMGrbEditor.py:2740
#: AppGUI/GUIElements.py:2604 AppTools/ToolNCC.py:350
msgid "Clear"
msgstr "Clear"

#: AppDatabase.py:1409 AppTools/ToolNCC.py:351 AppTools/ToolNCC.py:1624
msgid "Isolation"
msgstr "Isolation"

#: AppDatabase.py:1417 AppGUI/ObjectUI.py:409 AppGUI/ObjectUI.py:867
#: AppGUI/preferences/excellon/ExcellonOptPrefGroupUI.py:62
#: AppGUI/preferences/geometry/GeometryEditorPrefGroupUI.py:56
#: AppGUI/preferences/gerber/GerberOptPrefGroupUI.py:95
#: AppGUI/preferences/tools/ToolsNCCPrefGroupUI.py:137 AppTools/ToolNCC.py:359
msgid "Milling Type"
msgstr "Milling Type"

#: AppDatabase.py:1419 AppDatabase.py:1427
#: AppGUI/preferences/tools/ToolsNCCPrefGroupUI.py:139
#: AppGUI/preferences/tools/ToolsNCCPrefGroupUI.py:147 AppTools/ToolNCC.py:361
#: AppTools/ToolNCC.py:369
msgid ""
"Milling type when the selected tool is of type: 'iso_op':\n"
"- climb / best for precision milling and to reduce tool usage\n"
"- conventional / useful when there is no backlash compensation"
msgstr ""
"Milling type when the selected tool is of type: 'iso_op':\n"
"- climb / best for precision milling and to reduce tool usage\n"
"- conventional / useful when there is no backlash compensation"

#: AppDatabase.py:1424 AppGUI/ObjectUI.py:415
#: AppGUI/preferences/geometry/GeometryEditorPrefGroupUI.py:62
#: AppGUI/preferences/gerber/GerberOptPrefGroupUI.py:102
#: AppGUI/preferences/tools/ToolsNCCPrefGroupUI.py:144 AppTools/ToolNCC.py:366
msgid "Climb"
msgstr "Climb"

#: AppDatabase.py:1425 AppGUI/ObjectUI.py:416
#: AppGUI/preferences/geometry/GeometryEditorPrefGroupUI.py:63
#: AppGUI/preferences/gerber/GerberOptPrefGroupUI.py:103
#: AppGUI/preferences/tools/ToolsNCCPrefGroupUI.py:145 AppTools/ToolNCC.py:367
msgid "Conventional"
msgstr "Conventional"

#: AppDatabase.py:1437 AppDatabase.py:1546 AppEditors/FlatCAMGeoEditor.py:450
#: AppGUI/preferences/tools/ToolsNCCPrefGroupUI.py:182
#: AppGUI/preferences/tools/ToolsPaintPrefGroupUI.py:163
#: AppTools/ToolNCC.py:382 AppTools/ToolPaint.py:328
msgid "Overlap"
msgstr "Overlap"

#: AppDatabase.py:1439 AppGUI/preferences/tools/ToolsNCCPrefGroupUI.py:184
#: AppTools/ToolNCC.py:384
msgid ""
"How much (percentage) of the tool width to overlap each tool pass.\n"
"Adjust the value starting with lower values\n"
"and increasing it if areas that should be cleared are still \n"
"not cleared.\n"
"Lower values = faster processing, faster execution on CNC.\n"
"Higher values = slow processing and slow execution on CNC\n"
"due of too many paths."
msgstr ""
"How much (percentage) of the tool width to overlap each tool pass.\n"
"Adjust the value starting with lower values\n"
"and increasing it if areas that should be cleared are still \n"
"not cleared.\n"
"Lower values = faster processing, faster execution on CNC.\n"
"Higher values = slow processing and slow execution on CNC\n"
"due of too many paths."

#: AppDatabase.py:1458 AppDatabase.py:1567 AppEditors/FlatCAMGeoEditor.py:470
#: AppGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:72
#: AppGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:229
#: AppGUI/preferences/tools/Tools2FiducialsPrefGroupUI.py:59
#: AppGUI/preferences/tools/Tools2InvertPrefGroupUI.py:45
#: AppGUI/preferences/tools/Tools2InvertPrefGroupUI.py:53
#: AppGUI/preferences/tools/ToolsCornersPrefGroupUI.py:66
#: AppGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:115
#: AppGUI/preferences/tools/ToolsNCCPrefGroupUI.py:202
#: AppGUI/preferences/tools/ToolsPaintPrefGroupUI.py:183
#: AppTools/ToolCopperThieving.py:111 AppTools/ToolCopperThieving.py:362
#: AppTools/ToolCorners.py:140 AppTools/ToolCutOut.py:190
#: AppTools/ToolFiducials.py:172 AppTools/ToolInvertGerber.py:88
#: AppTools/ToolInvertGerber.py:96 AppTools/ToolNCC.py:403
#: AppTools/ToolPaint.py:349
msgid "Margin"
msgstr "Margin"

#: AppDatabase.py:1460
#: AppGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:74
#: AppGUI/preferences/tools/Tools2FiducialsPrefGroupUI.py:61
#: AppGUI/preferences/tools/Tools2FiducialsPrefGroupUI.py:125
#: AppGUI/preferences/tools/ToolsCornersPrefGroupUI.py:68
#: AppGUI/preferences/tools/ToolsNCCPrefGroupUI.py:204
#: AppTools/ToolCopperThieving.py:113 AppTools/ToolCorners.py:142
#: AppTools/ToolFiducials.py:174 AppTools/ToolNCC.py:405
msgid "Bounding box margin."
msgstr "Bounding box margin."

#: AppDatabase.py:1471 AppDatabase.py:1582 AppEditors/FlatCAMGeoEditor.py:484
#: AppGUI/preferences/tools/Tools2EDrillsPrefGroupUI.py:105
#: AppGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:106
#: AppGUI/preferences/tools/ToolsNCCPrefGroupUI.py:215
#: AppGUI/preferences/tools/ToolsPaintPrefGroupUI.py:198
#: AppTools/ToolExtractDrills.py:128 AppTools/ToolNCC.py:416
#: AppTools/ToolPaint.py:364 AppTools/ToolPunchGerber.py:139
msgid "Method"
msgstr "Method"

#: AppDatabase.py:1473 AppGUI/preferences/tools/ToolsNCCPrefGroupUI.py:217
#: AppTools/ToolNCC.py:418
msgid ""
"Algorithm for copper clearing:\n"
"- Standard: Fixed step inwards.\n"
"- Seed-based: Outwards from seed.\n"
"- Line-based: Parallel lines."
msgstr ""
"Algorithm for copper clearing:\n"
"- Standard: Fixed step inwards.\n"
"- Seed-based: Outwards from seed.\n"
"- Line-based: Parallel lines."

#: AppDatabase.py:1481 AppDatabase.py:1596 AppEditors/FlatCAMGeoEditor.py:498
#: AppGUI/preferences/tools/ToolsNCCPrefGroupUI.py:230
#: AppGUI/preferences/tools/ToolsPaintPrefGroupUI.py:217
#: AppTools/ToolNCC.py:431 AppTools/ToolNCC.py:2212 AppTools/ToolNCC.py:2739
#: AppTools/ToolNCC.py:2771 AppTools/ToolPaint.py:389
#: AppTools/ToolPaint.py:1839 tclCommands/TclCommandCopperClear.py:126
#: tclCommands/TclCommandCopperClear.py:134 tclCommands/TclCommandPaint.py:125
msgid "Standard"
msgstr "Standard"

#: AppDatabase.py:1481 AppDatabase.py:1596 AppEditors/FlatCAMGeoEditor.py:498
#: AppEditors/FlatCAMGeoEditor.py:568 AppEditors/FlatCAMGeoEditor.py:5144
#: AppGUI/preferences/tools/ToolsNCCPrefGroupUI.py:230
#: AppGUI/preferences/tools/ToolsPaintPrefGroupUI.py:217
#: AppTools/ToolNCC.py:431 AppTools/ToolNCC.py:2223 AppTools/ToolNCC.py:2745
#: AppTools/ToolNCC.py:2777 AppTools/ToolPaint.py:389
#: AppTools/ToolPaint.py:1853 defaults.py:400 defaults.py:432
#: tclCommands/TclCommandCopperClear.py:128
#: tclCommands/TclCommandCopperClear.py:136 tclCommands/TclCommandPaint.py:127
msgid "Seed"
msgstr "Seed"

#: AppDatabase.py:1481 AppDatabase.py:1596 AppEditors/FlatCAMGeoEditor.py:498
#: AppEditors/FlatCAMGeoEditor.py:5148
#: AppGUI/preferences/tools/ToolsNCCPrefGroupUI.py:230
#: AppGUI/preferences/tools/ToolsPaintPrefGroupUI.py:217
#: AppTools/ToolNCC.py:431 AppTools/ToolNCC.py:2234 AppTools/ToolPaint.py:389
#: AppTools/ToolPaint.py:698 AppTools/ToolPaint.py:1867
#: tclCommands/TclCommandCopperClear.py:130 tclCommands/TclCommandPaint.py:129
msgid "Lines"
msgstr "Lines"

#: AppDatabase.py:1481 AppDatabase.py:1596
#: AppGUI/preferences/tools/ToolsNCCPrefGroupUI.py:230
#: AppGUI/preferences/tools/ToolsPaintPrefGroupUI.py:217
#: AppTools/ToolNCC.py:431 AppTools/ToolNCC.py:2245 AppTools/ToolPaint.py:389
#: AppTools/ToolPaint.py:2032 tclCommands/TclCommandPaint.py:133
msgid "Combo"
msgstr "Combo"

#: AppDatabase.py:1489 AppDatabase.py:1607
#: AppGUI/preferences/tools/ToolsNCCPrefGroupUI.py:237
#: AppGUI/preferences/tools/ToolsPaintPrefGroupUI.py:224
#: AppTools/ToolNCC.py:439 AppTools/ToolPaint.py:400
msgid "Connect"
msgstr "Connect"

#: AppDatabase.py:1493 AppDatabase.py:1610 AppEditors/FlatCAMGeoEditor.py:507
#: AppGUI/preferences/tools/ToolsNCCPrefGroupUI.py:239
#: AppGUI/preferences/tools/ToolsPaintPrefGroupUI.py:226
#: AppTools/ToolNCC.py:443 AppTools/ToolPaint.py:403
msgid ""
"Draw lines between resulting\n"
"segments to minimize tool lifts."
msgstr ""
"Draw lines between resulting\n"
"segments to minimize tool lifts."

#: AppDatabase.py:1499 AppDatabase.py:1614
#: AppGUI/preferences/tools/ToolsNCCPrefGroupUI.py:246
#: AppGUI/preferences/tools/ToolsPaintPrefGroupUI.py:232
#: AppTools/ToolNCC.py:449 AppTools/ToolPaint.py:407
msgid "Contour"
msgstr "Contour"

#: AppDatabase.py:1503 AppDatabase.py:1617 AppEditors/FlatCAMGeoEditor.py:517
#: AppGUI/preferences/tools/ToolsNCCPrefGroupUI.py:248
#: AppGUI/preferences/tools/ToolsPaintPrefGroupUI.py:234
#: AppTools/ToolNCC.py:453 AppTools/ToolPaint.py:410
msgid ""
"Cut around the perimeter of the polygon\n"
"to trim rough edges."
msgstr ""
"Cut around the perimeter of the polygon\n"
"to trim rough edges."

#: AppDatabase.py:1509 AppEditors/FlatCAMGeoEditor.py:611
#: AppEditors/FlatCAMGrbEditor.py:5289 AppGUI/ObjectUI.py:143
#: AppGUI/ObjectUI.py:1599 AppGUI/ObjectUI.py:2456
#: AppGUI/preferences/tools/ToolsNCCPrefGroupUI.py:255
#: AppGUI/preferences/tools/ToolsTransformPrefGroupUI.py:142
#: AppTools/ToolNCC.py:459 AppTools/ToolTransform.py:28
msgid "Offset"
msgstr "Offset"

#: AppDatabase.py:1513 AppGUI/preferences/tools/ToolsNCCPrefGroupUI.py:257
#: AppTools/ToolNCC.py:463
msgid ""
"If used, it will add an offset to the copper features.\n"
"The copper clearing will finish to a distance\n"
"from the copper features.\n"
"The value can be between 0 and 10 FlatCAM units."
msgstr ""
"If used, it will add an offset to the copper features.\n"
"The copper clearing will finish to a distance\n"
"from the copper features.\n"
"The value can be between 0 and 10 FlatCAM units."

#: AppDatabase.py:1548 AppEditors/FlatCAMGeoEditor.py:452
#: AppGUI/preferences/tools/ToolsPaintPrefGroupUI.py:165
#: AppTools/ToolPaint.py:330
msgid ""
"How much (percentage) of the tool width to overlap each tool pass.\n"
"Adjust the value starting with lower values\n"
"and increasing it if areas that should be painted are still \n"
"not painted.\n"
"Lower values = faster processing, faster execution on CNC.\n"
"Higher values = slow processing and slow execution on CNC\n"
"due of too many paths."
msgstr ""
"How much (percentage) of the tool width to overlap each tool pass.\n"
"Adjust the value starting with lower values\n"
"and increasing it if areas that should be painted are still \n"
"not painted.\n"
"Lower values = faster processing, faster execution on CNC.\n"
"Higher values = slow processing and slow execution on CNC\n"
"due of too many paths."

#: AppDatabase.py:1569 AppEditors/FlatCAMGeoEditor.py:472
#: AppGUI/preferences/tools/ToolsPaintPrefGroupUI.py:185
#: AppTools/ToolPaint.py:351
msgid ""
"Distance by which to avoid\n"
"the edges of the polygon to\n"
"be painted."
msgstr ""
"Distance by which to avoid\n"
"the edges of the polygon to\n"
"be painted."

#: AppDatabase.py:1584 AppGUI/preferences/tools/ToolsPaintPrefGroupUI.py:200
#: AppTools/ToolPaint.py:366
msgid ""
"Algorithm for painting:\n"
"- Standard: Fixed step inwards.\n"
"- Seed-based: Outwards from seed.\n"
"- Line-based: Parallel lines.\n"
"- Laser-lines: Active only for Gerber objects.\n"
"Will create lines that follow the traces.\n"
"- Combo: In case of failure a new method will be picked from the above\n"
"in the order specified."
msgstr ""
"Algorithm for painting:\n"
"- Standard: Fixed step inwards.\n"
"- Seed-based: Outwards from seed.\n"
"- Line-based: Parallel lines.\n"
"- Laser-lines: Active only for Gerber objects.\n"
"Will create lines that follow the traces.\n"
"- Combo: In case of failure a new method will be picked from the above\n"
"in the order specified."

#: AppDatabase.py:1596 AppDatabase.py:1598
#: AppGUI/preferences/tools/ToolsPaintPrefGroupUI.py:217
#: AppTools/ToolPaint.py:389 AppTools/ToolPaint.py:391
#: AppTools/ToolPaint.py:692 AppTools/ToolPaint.py:697
#: AppTools/ToolPaint.py:1881 tclCommands/TclCommandPaint.py:131
msgid "Laser_lines"
msgstr "Laser_lines"

#: AppDatabase.py:1641
msgid "Add Tool in DB"
msgstr "Add Tool in DB"

#: AppDatabase.py:1675
msgid "Save DB"
msgstr "Save DB"

#: AppDatabase.py:1677
msgid "Save the Tools Database information's."
msgstr "Save the Tools Database information's."

#: AppEditors/FlatCAMExcEditor.py:50 AppEditors/FlatCAMExcEditor.py:74
#: AppEditors/FlatCAMExcEditor.py:168 AppEditors/FlatCAMExcEditor.py:385
#: AppEditors/FlatCAMExcEditor.py:589 AppEditors/FlatCAMGrbEditor.py:241
#: AppEditors/FlatCAMGrbEditor.py:248
msgid "Click to place ..."
msgstr "Click to place ..."

#: AppEditors/FlatCAMExcEditor.py:58
msgid "To add a drill first select a tool"
msgstr "To add a drill first select a tool"

#: AppEditors/FlatCAMExcEditor.py:122
msgid "Done. Drill added."
msgstr "Done. Drill added."

#: AppEditors/FlatCAMExcEditor.py:176
msgid "To add an Drill Array first select a tool in Tool Table"
msgstr "To add an Drill Array first select a tool in Tool Table"

#: AppEditors/FlatCAMExcEditor.py:192 AppEditors/FlatCAMExcEditor.py:415
#: AppEditors/FlatCAMExcEditor.py:636 AppEditors/FlatCAMExcEditor.py:1151
#: AppEditors/FlatCAMExcEditor.py:1178 AppEditors/FlatCAMGrbEditor.py:471
#: AppEditors/FlatCAMGrbEditor.py:1935 AppEditors/FlatCAMGrbEditor.py:1965
msgid "Click on target location ..."
msgstr "Click on target location ..."

#: AppEditors/FlatCAMExcEditor.py:211
msgid "Click on the Drill Circular Array Start position"
msgstr "Click on the Drill Circular Array Start position"

#: AppEditors/FlatCAMExcEditor.py:233 AppEditors/FlatCAMExcEditor.py:677
#: AppEditors/FlatCAMGrbEditor.py:516
msgid "The value is not Float. Check for comma instead of dot separator."
msgstr "The value is not Float. Check for comma instead of dot separator."

#: AppEditors/FlatCAMExcEditor.py:237
msgid "The value is mistyped. Check the value"
msgstr "The value is mistyped. Check the value"

#: AppEditors/FlatCAMExcEditor.py:336
msgid "Too many drills for the selected spacing angle."
msgstr "Too many drills for the selected spacing angle."

#: AppEditors/FlatCAMExcEditor.py:354
msgid "Done. Drill Array added."
msgstr "Done. Drill Array added."

#: AppEditors/FlatCAMExcEditor.py:394
msgid "To add a slot first select a tool"
msgstr "To add a slot first select a tool"

#: AppEditors/FlatCAMExcEditor.py:454 AppEditors/FlatCAMExcEditor.py:461
#: AppEditors/FlatCAMExcEditor.py:742 AppEditors/FlatCAMExcEditor.py:749
msgid "Value is missing or wrong format. Add it and retry."
msgstr "Value is missing or wrong format. Add it and retry."

#: AppEditors/FlatCAMExcEditor.py:559
msgid "Done. Adding Slot completed."
msgstr "Done. Adding Slot completed."

#: AppEditors/FlatCAMExcEditor.py:597
msgid "To add an Slot Array first select a tool in Tool Table"
msgstr "To add an Slot Array first select a tool in Tool Table"

#: AppEditors/FlatCAMExcEditor.py:655
msgid "Click on the Slot Circular Array Start position"
msgstr "Click on the Slot Circular Array Start position"

#: AppEditors/FlatCAMExcEditor.py:680 AppEditors/FlatCAMGrbEditor.py:519
msgid "The value is mistyped. Check the value."
msgstr "The value is mistyped. Check the value."

#: AppEditors/FlatCAMExcEditor.py:859
msgid "Too many Slots for the selected spacing angle."
msgstr "Too many Slots for the selected spacing angle."

#: AppEditors/FlatCAMExcEditor.py:882
msgid "Done. Slot Array added."
msgstr "Done. Slot Array added."

#: AppEditors/FlatCAMExcEditor.py:904
msgid "Click on the Drill(s) to resize ..."
msgstr "Click on the Drill(s) to resize ..."

#: AppEditors/FlatCAMExcEditor.py:934
msgid "Resize drill(s) failed. Please enter a diameter for resize."
msgstr "Resize drill(s) failed. Please enter a diameter for resize."

#: AppEditors/FlatCAMExcEditor.py:1112
msgid "Done. Drill/Slot Resize completed."
msgstr "Done. Drill/Slot Resize completed."

#: AppEditors/FlatCAMExcEditor.py:1115
msgid "Cancelled. No drills/slots selected for resize ..."
msgstr "Cancelled. No drills/slots selected for resize ..."

#: AppEditors/FlatCAMExcEditor.py:1153 AppEditors/FlatCAMGrbEditor.py:1937
msgid "Click on reference location ..."
msgstr "Click on reference location ..."

#: AppEditors/FlatCAMExcEditor.py:1210
msgid "Done. Drill(s) Move completed."
msgstr "Done. Drill(s) Move completed."

#: AppEditors/FlatCAMExcEditor.py:1318
msgid "Done. Drill(s) copied."
msgstr "Done. Drill(s) copied."

#: AppEditors/FlatCAMExcEditor.py:1557
#: AppGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:26
msgid "Excellon Editor"
msgstr "Excellon Editor"

#: AppEditors/FlatCAMExcEditor.py:1564 AppEditors/FlatCAMGrbEditor.py:2460
msgid "Name:"
msgstr "Name:"

#: AppEditors/FlatCAMExcEditor.py:1570 AppGUI/ObjectUI.py:761
#: AppGUI/ObjectUI.py:1567 AppTools/ToolNCC.py:120 AppTools/ToolPaint.py:114
#: AppTools/ToolSolderPaste.py:74
msgid "Tools Table"
msgstr "Tools Table"

#: AppEditors/FlatCAMExcEditor.py:1572 AppGUI/ObjectUI.py:763
msgid ""
"Tools in this Excellon object\n"
"when are used for drilling."
msgstr ""
"Tools in this Excellon object\n"
"when are used for drilling."

#: AppEditors/FlatCAMExcEditor.py:1584 AppEditors/FlatCAMExcEditor.py:3041
#: AppGUI/ObjectUI.py:781 AppObjects/FlatCAMExcellon.py:1177
#: AppObjects/FlatCAMExcellon.py:1268 AppObjects/FlatCAMExcellon.py:1453
#: AppTools/ToolNCC.py:132 AppTools/ToolPaint.py:127
#: AppTools/ToolPcbWizard.py:76 AppTools/ToolProperties.py:416
#: AppTools/ToolProperties.py:476 AppTools/ToolSolderPaste.py:85
#: tclCommands/TclCommandDrillcncjob.py:195
msgid "Diameter"
msgstr "Diameter"

#: AppEditors/FlatCAMExcEditor.py:1592
msgid "Add/Delete Tool"
msgstr "Add/Delete Tool"

#: AppEditors/FlatCAMExcEditor.py:1594
msgid ""
"Add/Delete a tool to the tool list\n"
"for this Excellon object."
msgstr ""
"Add/Delete a tool to the tool list\n"
"for this Excellon object."

#: AppEditors/FlatCAMExcEditor.py:1606 AppGUI/ObjectUI.py:1687
#: AppGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:57
msgid "Diameter for the new tool"
msgstr "Diameter for the new tool"

#: AppEditors/FlatCAMExcEditor.py:1616
msgid "Add Tool"
msgstr "Add Tool"

#: AppEditors/FlatCAMExcEditor.py:1618
msgid ""
"Add a new tool to the tool list\n"
"with the diameter specified above."
msgstr ""
"Add a new tool to the tool list\n"
"with the diameter specified above."

#: AppEditors/FlatCAMExcEditor.py:1630
msgid "Delete Tool"
msgstr "Delete Tool"

#: AppEditors/FlatCAMExcEditor.py:1632
msgid ""
"Delete a tool in the tool list\n"
"by selecting a row in the tool table."
msgstr ""
"Delete a tool in the tool list\n"
"by selecting a row in the tool table."

#: AppEditors/FlatCAMExcEditor.py:1650 AppGUI/MainGUI.py:4278
msgid "Resize Drill(s)"
msgstr "Resize Drill(s)"

#: AppEditors/FlatCAMExcEditor.py:1652
msgid "Resize a drill or a selection of drills."
msgstr "Resize a drill or a selection of drills."

#: AppEditors/FlatCAMExcEditor.py:1659
msgid "Resize Dia"
msgstr "Resize Dia"

#: AppEditors/FlatCAMExcEditor.py:1661
msgid "Diameter to resize to."
msgstr "Diameter to resize to."

#: AppEditors/FlatCAMExcEditor.py:1672
msgid "Resize"
msgstr "Resize"

#: AppEditors/FlatCAMExcEditor.py:1674
msgid "Resize drill(s)"
msgstr "Resize drill(s)"

#: AppEditors/FlatCAMExcEditor.py:1699 AppGUI/MainGUI.py:1471
#: AppGUI/MainGUI.py:4277
msgid "Add Drill Array"
msgstr "Add Drill Array"

#: AppEditors/FlatCAMExcEditor.py:1701
msgid "Add an array of drills (linear or circular array)"
msgstr "Add an array of drills (linear or circular array)"

#: AppEditors/FlatCAMExcEditor.py:1707
msgid ""
"Select the type of drills array to create.\n"
"It can be Linear X(Y) or Circular"
msgstr ""
"Select the type of drills array to create.\n"
"It can be Linear X(Y) or Circular"

#: AppEditors/FlatCAMExcEditor.py:1710 AppEditors/FlatCAMExcEditor.py:1924
#: AppEditors/FlatCAMGrbEditor.py:2773
msgid "Linear"
msgstr "Linear"

#: AppEditors/FlatCAMExcEditor.py:1711 AppEditors/FlatCAMExcEditor.py:1925
#: AppEditors/FlatCAMGrbEditor.py:2774 AppGUI/ObjectUI.py:316
#: AppGUI/preferences/tools/Tools2EDrillsPrefGroupUI.py:52
#: AppGUI/preferences/tools/Tools2EDrillsPrefGroupUI.py:149
#: AppGUI/preferences/tools/Tools2FiducialsPrefGroupUI.py:107
#: AppGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:52
#: AppGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:151
#: AppGUI/preferences/tools/ToolsNCCPrefGroupUI.py:61
#: AppGUI/preferences/tools/ToolsPaintPrefGroupUI.py:70
#: AppTools/ToolExtractDrills.py:78 AppTools/ToolExtractDrills.py:201
#: AppTools/ToolFiducials.py:220 AppTools/ToolNCC.py:221
#: AppTools/ToolPaint.py:203 AppTools/ToolPunchGerber.py:89
#: AppTools/ToolPunchGerber.py:229
msgid "Circular"
msgstr "Circular"

#: AppEditors/FlatCAMExcEditor.py:1719
#: AppGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:68
msgid "Nr of drills"
msgstr "Nr of drills"

#: AppEditors/FlatCAMExcEditor.py:1720
#: AppGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:70
msgid "Specify how many drills to be in the array."
msgstr "Specify how many drills to be in the array."

#: AppEditors/FlatCAMExcEditor.py:1738 AppEditors/FlatCAMExcEditor.py:1788
#: AppEditors/FlatCAMExcEditor.py:1860 AppEditors/FlatCAMExcEditor.py:1953
#: AppEditors/FlatCAMExcEditor.py:2004 AppEditors/FlatCAMGrbEditor.py:1571
#: AppEditors/FlatCAMGrbEditor.py:2802 AppEditors/FlatCAMGrbEditor.py:2851
#: AppGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:178
msgid "Direction"
msgstr "Direction"

#: AppEditors/FlatCAMExcEditor.py:1740 AppEditors/FlatCAMExcEditor.py:1955
#: AppEditors/FlatCAMGrbEditor.py:2804
#: AppGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:86
#: AppGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:234
#: AppGUI/preferences/gerber/GerberEditorPrefGroupUI.py:122
msgid ""
"Direction on which the linear array is oriented:\n"
"- 'X' - horizontal axis \n"
"- 'Y' - vertical axis or \n"
"- 'Angle' - a custom angle for the array inclination"
msgstr ""
"Direction on which the linear array is oriented:\n"
"- 'X' - horizontal axis \n"
"- 'Y' - vertical axis or \n"
"- 'Angle' - a custom angle for the array inclination"

#: AppEditors/FlatCAMExcEditor.py:1747 AppEditors/FlatCAMExcEditor.py:1869
#: AppEditors/FlatCAMExcEditor.py:1962 AppEditors/FlatCAMGrbEditor.py:2811
#: AppGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:92
#: AppGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:187
#: AppGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:240
#: AppGUI/preferences/gerber/GerberEditorPrefGroupUI.py:128
#: AppGUI/preferences/tools/ToolsFilmPrefGroupUI.py:208
#: AppTools/ToolFilm.py:239
msgid "X"
msgstr "X"

#: AppEditors/FlatCAMExcEditor.py:1748 AppEditors/FlatCAMExcEditor.py:1870
#: AppEditors/FlatCAMExcEditor.py:1963 AppEditors/FlatCAMGrbEditor.py:2812
#: AppGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:93
#: AppGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:188
#: AppGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:241
#: AppGUI/preferences/gerber/GerberEditorPrefGroupUI.py:129
#: AppGUI/preferences/tools/ToolsFilmPrefGroupUI.py:209
#: AppTools/ToolFilm.py:240
msgid "Y"
msgstr "Y"

#: AppEditors/FlatCAMExcEditor.py:1749 AppEditors/FlatCAMExcEditor.py:1766
#: AppEditors/FlatCAMExcEditor.py:1800 AppEditors/FlatCAMExcEditor.py:1871
#: AppEditors/FlatCAMExcEditor.py:1875 AppEditors/FlatCAMExcEditor.py:1964
#: AppEditors/FlatCAMExcEditor.py:1982 AppEditors/FlatCAMExcEditor.py:2016
#: AppEditors/FlatCAMGrbEditor.py:2813 AppEditors/FlatCAMGrbEditor.py:2830
#: AppEditors/FlatCAMGrbEditor.py:2866
#: AppGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:94
#: AppGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:113
#: AppGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:189
#: AppGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:194
#: AppGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:242
#: AppGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:263
#: AppGUI/preferences/gerber/GerberEditorPrefGroupUI.py:130
#: AppGUI/preferences/gerber/GerberEditorPrefGroupUI.py:148
#: AppGUI/preferences/tools/ToolsTransformPrefGroupUI.py:53
#: AppTools/ToolDistance.py:120 AppTools/ToolDistanceMin.py:68
#: AppTools/ToolTransform.py:60
msgid "Angle"
msgstr "Angle"

#: AppEditors/FlatCAMExcEditor.py:1753 AppEditors/FlatCAMExcEditor.py:1968
#: AppEditors/FlatCAMGrbEditor.py:2817
#: AppGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:100
#: AppGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:248
#: AppGUI/preferences/gerber/GerberEditorPrefGroupUI.py:136
msgid "Pitch"
msgstr "Pitch"

#: AppEditors/FlatCAMExcEditor.py:1755 AppEditors/FlatCAMExcEditor.py:1970
#: AppEditors/FlatCAMGrbEditor.py:2819
#: AppGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:102
#: AppGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:250
#: AppGUI/preferences/gerber/GerberEditorPrefGroupUI.py:138
msgid "Pitch = Distance between elements of the array."
msgstr "Pitch = Distance between elements of the array."

#: AppEditors/FlatCAMExcEditor.py:1768 AppEditors/FlatCAMExcEditor.py:1984
msgid ""
"Angle at which the linear array is placed.\n"
"The precision is of max 2 decimals.\n"
"Min value is: -360 degrees.\n"
"Max value is:  360.00 degrees."
msgstr ""
"Angle at which the linear array is placed.\n"
"The precision is of max 2 decimals.\n"
"Min value is: -360 degrees.\n"
"Max value is:  360.00 degrees."

#: AppEditors/FlatCAMExcEditor.py:1789 AppEditors/FlatCAMExcEditor.py:2005
#: AppEditors/FlatCAMGrbEditor.py:2853
msgid ""
"Direction for circular array.Can be CW = clockwise or CCW = counter "
"clockwise."
msgstr ""
"Direction for circular array.Can be CW = clockwise or CCW = counter "
"clockwise."

#: AppEditors/FlatCAMExcEditor.py:1796 AppEditors/FlatCAMExcEditor.py:2012
#: AppEditors/FlatCAMGrbEditor.py:2861
#: AppGUI/preferences/excellon/ExcellonAdvOptPrefGroupUI.py:129
#: AppGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:136
#: AppGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:286
#: AppGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:142
#: AppGUI/preferences/gerber/GerberEditorPrefGroupUI.py:170
msgid "CW"
msgstr "CW"

#: AppEditors/FlatCAMExcEditor.py:1797 AppEditors/FlatCAMExcEditor.py:2013
#: AppEditors/FlatCAMGrbEditor.py:2862
#: AppGUI/preferences/excellon/ExcellonAdvOptPrefGroupUI.py:130
#: AppGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:137
#: AppGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:287
#: AppGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:143
#: AppGUI/preferences/gerber/GerberEditorPrefGroupUI.py:171
msgid "CCW"
msgstr "CCW"

#: AppEditors/FlatCAMExcEditor.py:1801 AppEditors/FlatCAMExcEditor.py:2017
#: AppEditors/FlatCAMGrbEditor.py:2868
#: AppGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:115
#: AppGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:145
#: AppGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:265
#: AppGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:295
#: AppGUI/preferences/gerber/GerberEditorPrefGroupUI.py:150
#: AppGUI/preferences/gerber/GerberEditorPrefGroupUI.py:179
msgid "Angle at which each element in circular array is placed."
msgstr "Angle at which each element in circular array is placed."

#: AppEditors/FlatCAMExcEditor.py:1835
msgid "Slot Parameters"
msgstr "Slot Parameters"

#: AppEditors/FlatCAMExcEditor.py:1837
msgid ""
"Parameters for adding a slot (hole with oval shape)\n"
"either single or as an part of an array."
msgstr ""
"Parameters for adding a slot (hole with oval shape)\n"
"either single or as an part of an array."

#: AppEditors/FlatCAMExcEditor.py:1846
#: AppGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:162
#: AppGUI/preferences/tools/ToolsCornersPrefGroupUI.py:56
#: AppTools/ToolCorners.py:127 AppTools/ToolProperties.py:559
msgid "Length"
msgstr "Length"

#: AppEditors/FlatCAMExcEditor.py:1848
#: AppGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:164
msgid "Length = The length of the slot."
msgstr "Length = The length of the slot."

#: AppEditors/FlatCAMExcEditor.py:1862
#: AppGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:180
msgid ""
"Direction on which the slot is oriented:\n"
"- 'X' - horizontal axis \n"
"- 'Y' - vertical axis or \n"
"- 'Angle' - a custom angle for the slot inclination"
msgstr ""
"Direction on which the slot is oriented:\n"
"- 'X' - horizontal axis \n"
"- 'Y' - vertical axis or \n"
"- 'Angle' - a custom angle for the slot inclination"

#: AppEditors/FlatCAMExcEditor.py:1877
msgid ""
"Angle at which the slot is placed.\n"
"The precision is of max 2 decimals.\n"
"Min value is: -360 degrees.\n"
"Max value is:  360.00 degrees."
msgstr ""
"Angle at which the slot is placed.\n"
"The precision is of max 2 decimals.\n"
"Min value is: -360 degrees.\n"
"Max value is:  360.00 degrees."

#: AppEditors/FlatCAMExcEditor.py:1910
msgid "Slot Array Parameters"
msgstr "Slot Array Parameters"

#: AppEditors/FlatCAMExcEditor.py:1912
msgid "Parameters for the array of slots (linear or circular array)"
msgstr "Parameters for the array of slots (linear or circular array)"

#: AppEditors/FlatCAMExcEditor.py:1921
msgid ""
"Select the type of slot array to create.\n"
"It can be Linear X(Y) or Circular"
msgstr ""
"Select the type of slot array to create.\n"
"It can be Linear X(Y) or Circular"

#: AppEditors/FlatCAMExcEditor.py:1933
#: AppGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:219
msgid "Nr of slots"
msgstr "Nr of slots"

#: AppEditors/FlatCAMExcEditor.py:1934
#: AppGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:221
msgid "Specify how many slots to be in the array."
msgstr "Specify how many slots to be in the array."

#: AppEditors/FlatCAMExcEditor.py:2452 AppObjects/FlatCAMExcellon.py:423
msgid "Total Drills"
msgstr "Total Drills"

#: AppEditors/FlatCAMExcEditor.py:2484 AppObjects/FlatCAMExcellon.py:454
msgid "Total Slots"
msgstr "Total Slots"

#: AppEditors/FlatCAMExcEditor.py:2559 AppEditors/FlatCAMGeoEditor.py:1075
#: AppEditors/FlatCAMGeoEditor.py:1116 AppEditors/FlatCAMGeoEditor.py:1144
#: AppEditors/FlatCAMGeoEditor.py:1172 AppEditors/FlatCAMGeoEditor.py:1216
#: AppEditors/FlatCAMGeoEditor.py:1251 AppEditors/FlatCAMGeoEditor.py:1279
#: AppObjects/FlatCAMGeometry.py:656 AppObjects/FlatCAMGeometry.py:1090
#: AppObjects/FlatCAMGeometry.py:1830 AppObjects/FlatCAMGeometry.py:2480
#: AppTools/ToolNCC.py:1498 AppTools/ToolPaint.py:1248
#: AppTools/ToolPaint.py:1419 AppTools/ToolSolderPaste.py:883
#: AppTools/ToolSolderPaste.py:956
msgid "Wrong value format entered, use a number."
msgstr "Wrong value format entered, use a number."

#: AppEditors/FlatCAMExcEditor.py:2570
msgid ""
"Tool already in the original or actual tool list.\n"
"Save and reedit Excellon if you need to add this tool. "
msgstr ""
"Tool already in the original or actual tool list.\n"
"Save and reedit Excellon if you need to add this tool. "

#: AppEditors/FlatCAMExcEditor.py:2579 AppGUI/MainGUI.py:3285
msgid "Added new tool with dia"
msgstr "Added new tool with dia"

#: AppEditors/FlatCAMExcEditor.py:2612
msgid "Select a tool in Tool Table"
msgstr "Select a tool in Tool Table"

#: AppEditors/FlatCAMExcEditor.py:2642
msgid "Deleted tool with diameter"
msgstr "Deleted tool with diameter"

#: AppEditors/FlatCAMExcEditor.py:2790
msgid "Done. Tool edit completed."
msgstr "Done. Tool edit completed."

#: AppEditors/FlatCAMExcEditor.py:3327
msgid "There are no Tools definitions in the file. Aborting Excellon creation."
msgstr ""
"There are no Tools definitions in the file. Aborting Excellon creation."

#: AppEditors/FlatCAMExcEditor.py:3331
msgid "An internal error has ocurred. See Shell.\n"
msgstr "An internal error has ocurred. See Shell.\n"

#: AppEditors/FlatCAMExcEditor.py:3336
msgid "Creating Excellon."
msgstr "Creating Excellon."

#: AppEditors/FlatCAMExcEditor.py:3348
msgid "Excellon editing finished."
msgstr "Excellon editing finished."

#: AppEditors/FlatCAMExcEditor.py:3365
msgid "Cancelled. There is no Tool/Drill selected"
msgstr "Cancelled. There is no Tool/Drill selected"

#: AppEditors/FlatCAMExcEditor.py:3599 AppEditors/FlatCAMExcEditor.py:3607
#: AppEditors/FlatCAMGeoEditor.py:4341 AppEditors/FlatCAMGeoEditor.py:4355
#: AppEditors/FlatCAMGrbEditor.py:1085 AppEditors/FlatCAMGrbEditor.py:1202
#: AppEditors/FlatCAMGrbEditor.py:1488 AppEditors/FlatCAMGrbEditor.py:1757
#: AppEditors/FlatCAMGrbEditor.py:4595 AppEditors/FlatCAMGrbEditor.py:4610
#: AppGUI/MainGUI.py:2638 AppGUI/MainGUI.py:2650
#: AppTools/ToolAlignObjects.py:393 AppTools/ToolAlignObjects.py:415
#: App_Main.py:4899 App_Main.py:5053
msgid "Done."
msgstr "Done."

#: AppEditors/FlatCAMExcEditor.py:3982
msgid "Done. Drill(s) deleted."
msgstr "Done. Drill(s) deleted."

#: AppEditors/FlatCAMExcEditor.py:4055 AppEditors/FlatCAMExcEditor.py:4065
#: AppEditors/FlatCAMGrbEditor.py:5041
msgid "Click on the circular array Center position"
msgstr "Click on the circular array Center position"

#: AppEditors/FlatCAMGeoEditor.py:84
msgid "Buffer distance:"
msgstr "Buffer distance:"

#: AppEditors/FlatCAMGeoEditor.py:85
msgid "Buffer corner:"
msgstr "Buffer corner:"

#: AppEditors/FlatCAMGeoEditor.py:87
msgid ""
"There are 3 types of corners:\n"
" - 'Round': the corner is rounded for exterior buffer.\n"
" - 'Square': the corner is met in a sharp angle for exterior buffer.\n"
" - 'Beveled': the corner is a line that directly connects the features "
"meeting in the corner"
msgstr ""
"There are 3 types of corners:\n"
" - 'Round': the corner is rounded for exterior buffer.\n"
" - 'Square': the corner is met in a sharp angle for exterior buffer.\n"
" - 'Beveled': the corner is a line that directly connects the features "
"meeting in the corner"

#: AppEditors/FlatCAMGeoEditor.py:93 AppEditors/FlatCAMGrbEditor.py:2629
msgid "Round"
msgstr "Round"

#: AppEditors/FlatCAMGeoEditor.py:94 AppEditors/FlatCAMGrbEditor.py:2630
#: AppGUI/ObjectUI.py:1370 AppGUI/ObjectUI.py:2204
#: AppGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:217
#: AppGUI/preferences/tools/Tools2EDrillsPrefGroupUI.py:68
#: AppGUI/preferences/tools/Tools2EDrillsPrefGroupUI.py:175
#: AppGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:68
#: AppGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:177
#: AppGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:143
#: AppGUI/preferences/tools/ToolsNCCPrefGroupUI.py:327
#: AppGUI/preferences/tools/ToolsPaintPrefGroupUI.py:291
#: AppTools/ToolExtractDrills.py:94 AppTools/ToolExtractDrills.py:227
#: AppTools/ToolNCC.py:583 AppTools/ToolPaint.py:526
#: AppTools/ToolPunchGerber.py:105 AppTools/ToolPunchGerber.py:255
#: AppTools/ToolQRCode.py:198
msgid "Square"
msgstr "Square"

#: AppEditors/FlatCAMGeoEditor.py:95 AppEditors/FlatCAMGrbEditor.py:2631
msgid "Beveled"
msgstr "Beveled"

#: AppEditors/FlatCAMGeoEditor.py:102
msgid "Buffer Interior"
msgstr "Buffer Interior"

#: AppEditors/FlatCAMGeoEditor.py:104
msgid "Buffer Exterior"
msgstr "Buffer Exterior"

#: AppEditors/FlatCAMGeoEditor.py:110
msgid "Full Buffer"
msgstr "Full Buffer"

#: AppEditors/FlatCAMGeoEditor.py:131 AppEditors/FlatCAMGeoEditor.py:3016
#: AppGUI/MainGUI.py:4187
#: AppGUI/preferences/gerber/GerberEditorPrefGroupUI.py:190
msgid "Buffer Tool"
msgstr "Buffer Tool"

#: AppEditors/FlatCAMGeoEditor.py:143 AppEditors/FlatCAMGeoEditor.py:160
#: AppEditors/FlatCAMGeoEditor.py:177 AppEditors/FlatCAMGeoEditor.py:3035
#: AppEditors/FlatCAMGeoEditor.py:3063 AppEditors/FlatCAMGeoEditor.py:3091
#: AppEditors/FlatCAMGrbEditor.py:5094
msgid "Buffer distance value is missing or wrong format. Add it and retry."
msgstr "Buffer distance value is missing or wrong format. Add it and retry."

#: AppEditors/FlatCAMGeoEditor.py:241
msgid "Font"
msgstr "Font"

#: AppEditors/FlatCAMGeoEditor.py:322 AppGUI/MainGUI.py:1409
msgid "Text"
msgstr "Text"

#: AppEditors/FlatCAMGeoEditor.py:348
msgid "Text Tool"
msgstr "Text Tool"

#: AppEditors/FlatCAMGeoEditor.py:404 AppGUI/MainGUI.py:513
#: AppGUI/MainGUI.py:1156 AppGUI/ObjectUI.py:818 AppGUI/ObjectUI.py:1764
#: AppObjects/FlatCAMExcellon.py:821 AppObjects/FlatCAMExcellon.py:1163
#: AppObjects/FlatCAMGeometry.py:816 AppTools/ToolNCC.py:331
#: AppTools/ToolNCC.py:797 AppTools/ToolPaint.py:313 AppTools/ToolPaint.py:766
msgid "Tool"
msgstr "Tool"

#: AppEditors/FlatCAMGeoEditor.py:438 AppGUI/ObjectUI.py:364
#: AppGUI/preferences/gerber/GerberOptPrefGroupUI.py:43
msgid "Tool dia"
msgstr "Tool dia"

#: AppEditors/FlatCAMGeoEditor.py:440
msgid "Diameter of the tool to be used in the operation."
msgstr "Diameter of the tool to be used in the operation."

#: AppEditors/FlatCAMGeoEditor.py:486
msgid ""
"Algorithm to paint the polygons:\n"
"- Standard: Fixed step inwards.\n"
"- Seed-based: Outwards from seed.\n"
"- Line-based: Parallel lines."
msgstr ""
"Algorithm to paint the polygons:\n"
"- Standard: Fixed step inwards.\n"
"- Seed-based: Outwards from seed.\n"
"- Line-based: Parallel lines."

#: AppEditors/FlatCAMGeoEditor.py:505
msgid "Connect:"
msgstr "Connect:"

#: AppEditors/FlatCAMGeoEditor.py:515
msgid "Contour:"
msgstr "Contour:"

#: AppEditors/FlatCAMGeoEditor.py:528 AppGUI/MainGUI.py:1413
msgid "Paint"
msgstr "Paint"

#: AppEditors/FlatCAMGeoEditor.py:546 AppGUI/MainGUI.py:917
#: AppGUI/MainGUI.py:1879 AppGUI/ObjectUI.py:2269 AppTools/ToolPaint.py:42
#: AppTools/ToolPaint.py:737
msgid "Paint Tool"
msgstr "Paint Tool"

#: AppEditors/FlatCAMGeoEditor.py:582 AppEditors/FlatCAMGeoEditor.py:1054
#: AppEditors/FlatCAMGeoEditor.py:3023 AppEditors/FlatCAMGeoEditor.py:3051
#: AppEditors/FlatCAMGeoEditor.py:3079 AppEditors/FlatCAMGeoEditor.py:4494
#: AppEditors/FlatCAMGrbEditor.py:5745
msgid "Cancelled. No shape selected."
msgstr "Cancelled. No shape selected."

#: AppEditors/FlatCAMGeoEditor.py:595 AppEditors/FlatCAMGeoEditor.py:3041
#: AppEditors/FlatCAMGeoEditor.py:3069 AppEditors/FlatCAMGeoEditor.py:3097
#: AppGUI/preferences/geometry/GeometryGenPrefGroupUI.py:59
#: AppTools/ToolProperties.py:117 AppTools/ToolProperties.py:162
msgid "Tools"
msgstr "Tools"

#: AppEditors/FlatCAMGeoEditor.py:606 AppEditors/FlatCAMGeoEditor.py:990
#: AppEditors/FlatCAMGrbEditor.py:5284 AppEditors/FlatCAMGrbEditor.py:5681
#: AppGUI/MainGUI.py:938 AppGUI/MainGUI.py:1900 AppTools/ToolTransform.py:460
msgid "Transform Tool"
msgstr "Transform Tool"

#: AppEditors/FlatCAMGeoEditor.py:607 AppEditors/FlatCAMGeoEditor.py:672
#: AppEditors/FlatCAMGrbEditor.py:5285 AppEditors/FlatCAMGrbEditor.py:5350
#: AppGUI/preferences/tools/ToolsTransformPrefGroupUI.py:45
#: AppTools/ToolTransform.py:24 AppTools/ToolTransform.py:466
msgid "Rotate"
msgstr "Rotate"

#: AppEditors/FlatCAMGeoEditor.py:608 AppEditors/FlatCAMGrbEditor.py:5286
#: AppTools/ToolTransform.py:25
msgid "Skew/Shear"
msgstr "Skew/Shear"

#: AppEditors/FlatCAMGeoEditor.py:609 AppEditors/FlatCAMGrbEditor.py:2678
#: AppEditors/FlatCAMGrbEditor.py:5287 AppGUI/MainGUI.py:1058
#: AppGUI/MainGUI.py:1456 AppGUI/MainGUI.py:2020 AppGUI/MainGUI.py:4399
#: AppGUI/ObjectUI.py:125
#: AppGUI/preferences/tools/ToolsTransformPrefGroupUI.py:95
#: AppTools/ToolTransform.py:26
msgid "Scale"
msgstr "Scale"

#: AppEditors/FlatCAMGeoEditor.py:610 AppEditors/FlatCAMGrbEditor.py:5288
#: AppTools/ToolTransform.py:27
msgid "Mirror (Flip)"
msgstr "Mirror (Flip)"

#: AppEditors/FlatCAMGeoEditor.py:624 AppEditors/FlatCAMGrbEditor.py:5302
#: AppGUI/MainGUI.py:849 AppGUI/MainGUI.py:1813
msgid "Editor"
msgstr "Editor"

#: AppEditors/FlatCAMGeoEditor.py:656 AppEditors/FlatCAMGrbEditor.py:5334
msgid "Angle:"
msgstr "Angle:"

#: AppEditors/FlatCAMGeoEditor.py:658 AppEditors/FlatCAMGrbEditor.py:5336
#: AppGUI/preferences/tools/ToolsTransformPrefGroupUI.py:55
#: AppTools/ToolTransform.py:62
msgid ""
"Angle for Rotation action, in degrees.\n"
"Float number between -360 and 359.\n"
"Positive numbers for CW motion.\n"
"Negative numbers for CCW motion."
msgstr ""
"Angle for Rotation action, in degrees.\n"
"Float number between -360 and 359.\n"
"Positive numbers for CW motion.\n"
"Negative numbers for CCW motion."

#: AppEditors/FlatCAMGeoEditor.py:674 AppEditors/FlatCAMGrbEditor.py:5352
msgid ""
"Rotate the selected shape(s).\n"
"The point of reference is the middle of\n"
"the bounding box for all selected shapes."
msgstr ""
"Rotate the selected shape(s).\n"
"The point of reference is the middle of\n"
"the bounding box for all selected shapes."

#: AppEditors/FlatCAMGeoEditor.py:697 AppEditors/FlatCAMGrbEditor.py:5375
msgid "Angle X:"
msgstr "Angle X:"

#: AppEditors/FlatCAMGeoEditor.py:699 AppEditors/FlatCAMGeoEditor.py:719
#: AppEditors/FlatCAMGrbEditor.py:5377 AppEditors/FlatCAMGrbEditor.py:5397
#: AppGUI/preferences/tools/ToolsTransformPrefGroupUI.py:74
#: AppGUI/preferences/tools/ToolsTransformPrefGroupUI.py:88
#: AppTools/ToolCalibration.py:505 AppTools/ToolCalibration.py:518
msgid ""
"Angle for Skew action, in degrees.\n"
"Float number between -360 and 359."
msgstr ""
"Angle for Skew action, in degrees.\n"
"Float number between -360 and 359."

#: AppEditors/FlatCAMGeoEditor.py:710 AppEditors/FlatCAMGrbEditor.py:5388
#: AppTools/ToolTransform.py:467
msgid "Skew X"
msgstr "Skew X"

#: AppEditors/FlatCAMGeoEditor.py:712 AppEditors/FlatCAMGeoEditor.py:732
#: AppEditors/FlatCAMGrbEditor.py:5390 AppEditors/FlatCAMGrbEditor.py:5410
msgid ""
"Skew/shear the selected shape(s).\n"
"The point of reference is the middle of\n"
"the bounding box for all selected shapes."
msgstr ""
"Skew/shear the selected shape(s).\n"
"The point of reference is the middle of\n"
"the bounding box for all selected shapes."

#: AppEditors/FlatCAMGeoEditor.py:717 AppEditors/FlatCAMGrbEditor.py:5395
msgid "Angle Y:"
msgstr "Angle Y:"

#: AppEditors/FlatCAMGeoEditor.py:730 AppEditors/FlatCAMGrbEditor.py:5408
#: AppTools/ToolTransform.py:468
msgid "Skew Y"
msgstr "Skew Y"

#: AppEditors/FlatCAMGeoEditor.py:758 AppEditors/FlatCAMGrbEditor.py:5436
msgid "Factor X:"
msgstr "Factor X:"

#: AppEditors/FlatCAMGeoEditor.py:760 AppEditors/FlatCAMGrbEditor.py:5438
#: AppTools/ToolCalibration.py:469
msgid "Factor for Scale action over X axis."
msgstr "Factor for Scale action over X axis."

#: AppEditors/FlatCAMGeoEditor.py:770 AppEditors/FlatCAMGrbEditor.py:5448
#: AppTools/ToolTransform.py:469
msgid "Scale X"
msgstr "Scale X"

#: AppEditors/FlatCAMGeoEditor.py:772 AppEditors/FlatCAMGeoEditor.py:791
#: AppEditors/FlatCAMGrbEditor.py:5450 AppEditors/FlatCAMGrbEditor.py:5469
msgid ""
"Scale the selected shape(s).\n"
"The point of reference depends on \n"
"the Scale reference checkbox state."
msgstr ""
"Scale the selected shape(s).\n"
"The point of reference depends on \n"
"the Scale reference checkbox state."

#: AppEditors/FlatCAMGeoEditor.py:777 AppEditors/FlatCAMGrbEditor.py:5455
msgid "Factor Y:"
msgstr "Factor Y:"

#: AppEditors/FlatCAMGeoEditor.py:779 AppEditors/FlatCAMGrbEditor.py:5457
#: AppTools/ToolCalibration.py:481
msgid "Factor for Scale action over Y axis."
msgstr "Factor for Scale action over Y axis."

#: AppEditors/FlatCAMGeoEditor.py:789 AppEditors/FlatCAMGrbEditor.py:5467
#: AppTools/ToolTransform.py:470
msgid "Scale Y"
msgstr "Scale Y"

#: AppEditors/FlatCAMGeoEditor.py:798 AppEditors/FlatCAMGrbEditor.py:5476
#: AppGUI/preferences/tools/ToolsTransformPrefGroupUI.py:124
#: AppTools/ToolTransform.py:189
msgid "Link"
msgstr "Link"

#: AppEditors/FlatCAMGeoEditor.py:800 AppEditors/FlatCAMGrbEditor.py:5478
msgid ""
"Scale the selected shape(s)\n"
"using the Scale Factor X for both axis."
msgstr ""
"Scale the selected shape(s)\n"
"using the Scale Factor X for both axis."

#: AppEditors/FlatCAMGeoEditor.py:806 AppEditors/FlatCAMGrbEditor.py:5484
#: AppGUI/preferences/tools/ToolsTransformPrefGroupUI.py:132
#: AppTools/ToolTransform.py:196
msgid "Scale Reference"
msgstr "Scale Reference"

#: AppEditors/FlatCAMGeoEditor.py:808 AppEditors/FlatCAMGrbEditor.py:5486
msgid ""
"Scale the selected shape(s)\n"
"using the origin reference when checked,\n"
"and the center of the biggest bounding box\n"
"of the selected shapes when unchecked."
msgstr ""
"Scale the selected shape(s)\n"
"using the origin reference when checked,\n"
"and the center of the biggest bounding box\n"
"of the selected shapes when unchecked."

#: AppEditors/FlatCAMGeoEditor.py:836 AppEditors/FlatCAMGrbEditor.py:5515
msgid "Value X:"
msgstr "Value X:"

#: AppEditors/FlatCAMGeoEditor.py:838 AppEditors/FlatCAMGrbEditor.py:5517
msgid "Value for Offset action on X axis."
msgstr "Value for Offset action on X axis."

#: AppEditors/FlatCAMGeoEditor.py:848 AppEditors/FlatCAMGrbEditor.py:5527
#: AppTools/ToolTransform.py:473
msgid "Offset X"
msgstr "Offset X"

#: AppEditors/FlatCAMGeoEditor.py:850 AppEditors/FlatCAMGeoEditor.py:870
#: AppEditors/FlatCAMGrbEditor.py:5529 AppEditors/FlatCAMGrbEditor.py:5549
msgid ""
"Offset the selected shape(s).\n"
"The point of reference is the middle of\n"
"the bounding box for all selected shapes.\n"
msgstr ""
"Offset the selected shape(s).\n"
"The point of reference is the middle of\n"
"the bounding box for all selected shapes.\n"

#: AppEditors/FlatCAMGeoEditor.py:856 AppEditors/FlatCAMGrbEditor.py:5535
msgid "Value Y:"
msgstr "Value Y:"

#: AppEditors/FlatCAMGeoEditor.py:858 AppEditors/FlatCAMGrbEditor.py:5537
msgid "Value for Offset action on Y axis."
msgstr "Value for Offset action on Y axis."

#: AppEditors/FlatCAMGeoEditor.py:868 AppEditors/FlatCAMGrbEditor.py:5547
#: AppTools/ToolTransform.py:474
msgid "Offset Y"
msgstr "Offset Y"

#: AppEditors/FlatCAMGeoEditor.py:899 AppEditors/FlatCAMGrbEditor.py:5578
#: AppTools/ToolTransform.py:475
msgid "Flip on X"
msgstr "Flip on X"

#: AppEditors/FlatCAMGeoEditor.py:901 AppEditors/FlatCAMGeoEditor.py:908
#: AppEditors/FlatCAMGrbEditor.py:5580 AppEditors/FlatCAMGrbEditor.py:5587
msgid ""
"Flip the selected shape(s) over the X axis.\n"
"Does not create a new shape."
msgstr ""
"Flip the selected shape(s) over the X axis.\n"
"Does not create a new shape."

#: AppEditors/FlatCAMGeoEditor.py:906 AppEditors/FlatCAMGrbEditor.py:5585
#: AppTools/ToolTransform.py:476
msgid "Flip on Y"
msgstr "Flip on Y"

#: AppEditors/FlatCAMGeoEditor.py:914 AppEditors/FlatCAMGrbEditor.py:5593
msgid "Ref Pt"
msgstr "Ref Pt"

#: AppEditors/FlatCAMGeoEditor.py:916 AppEditors/FlatCAMGrbEditor.py:5595
msgid ""
"Flip the selected shape(s)\n"
"around the point in Point Entry Field.\n"
"\n"
"The point coordinates can be captured by\n"
"left click on canvas together with pressing\n"
"SHIFT key. \n"
"Then click Add button to insert coordinates.\n"
"Or enter the coords in format (x, y) in the\n"
"Point Entry field and click Flip on X(Y)"
msgstr ""
"Flip the selected shape(s)\n"
"around the point in Point Entry Field.\n"
"\n"
"The point coordinates can be captured by\n"
"left click on canvas together with pressing\n"
"SHIFT key. \n"
"Then click Add button to insert coordinates.\n"
"Or enter the coords in format (x, y) in the\n"
"Point Entry field and click Flip on X(Y)"

#: AppEditors/FlatCAMGeoEditor.py:928 AppEditors/FlatCAMGrbEditor.py:5607
msgid "Point:"
msgstr "Point:"

#: AppEditors/FlatCAMGeoEditor.py:930 AppEditors/FlatCAMGrbEditor.py:5609
#: AppTools/ToolTransform.py:299
msgid ""
"Coordinates in format (x, y) used as reference for mirroring.\n"
"The 'x' in (x, y) will be used when using Flip on X and\n"
"the 'y' in (x, y) will be used when using Flip on Y."
msgstr ""
"Coordinates in format (x, y) used as reference for mirroring.\n"
"The 'x' in (x, y) will be used when using Flip on X and\n"
"the 'y' in (x, y) will be used when using Flip on Y."

#: AppEditors/FlatCAMGeoEditor.py:938 AppEditors/FlatCAMGrbEditor.py:2581
#: AppEditors/FlatCAMGrbEditor.py:5619 AppGUI/ObjectUI.py:1697
#: AppTools/ToolDblSided.py:192 AppTools/ToolDblSided.py:425
#: AppTools/ToolNCC.py:294 AppTools/ToolNCC.py:631 AppTools/ToolPaint.py:276
#: AppTools/ToolPaint.py:675 AppTools/ToolSolderPaste.py:122
#: AppTools/ToolSolderPaste.py:597 AppTools/ToolTransform.py:478
#: App_Main.py:5843
msgid "Add"
msgstr "Add"

#: AppEditors/FlatCAMGeoEditor.py:940 AppEditors/FlatCAMGrbEditor.py:5621
#: AppTools/ToolTransform.py:309
msgid ""
"The point coordinates can be captured by\n"
"left click on canvas together with pressing\n"
"SHIFT key. Then click Add button to insert."
msgstr ""
"The point coordinates can be captured by\n"
"left click on canvas together with pressing\n"
"SHIFT key. Then click Add button to insert."

#: AppEditors/FlatCAMGeoEditor.py:1303 AppEditors/FlatCAMGrbEditor.py:5929
msgid "No shape selected. Please Select a shape to rotate!"
msgstr "No shape selected. Please Select a shape to rotate!"

#: AppEditors/FlatCAMGeoEditor.py:1306 AppEditors/FlatCAMGrbEditor.py:5932
#: AppTools/ToolTransform.py:679
msgid "Appying Rotate"
msgstr "Appying Rotate"

#: AppEditors/FlatCAMGeoEditor.py:1332 AppEditors/FlatCAMGrbEditor.py:5964
msgid "Done. Rotate completed."
msgstr "Done. Rotate completed."

#: AppEditors/FlatCAMGeoEditor.py:1334
msgid "Rotation action was not executed"
msgstr "Rotation action was not executed"

#: AppEditors/FlatCAMGeoEditor.py:1353 AppEditors/FlatCAMGrbEditor.py:5983
msgid "No shape selected. Please Select a shape to flip!"
msgstr "No shape selected. Please Select a shape to flip!"

#: AppEditors/FlatCAMGeoEditor.py:1356 AppEditors/FlatCAMGrbEditor.py:5986
#: AppTools/ToolTransform.py:728
msgid "Applying Flip"
msgstr "Applying Flip"

#: AppEditors/FlatCAMGeoEditor.py:1385 AppEditors/FlatCAMGrbEditor.py:6024
#: AppTools/ToolTransform.py:769
msgid "Flip on the Y axis done"
msgstr "Flip on the Y axis done"

#: AppEditors/FlatCAMGeoEditor.py:1389 AppEditors/FlatCAMGrbEditor.py:6033
#: AppTools/ToolTransform.py:778
msgid "Flip on the X axis done"
msgstr "Flip on the X axis done"

#: AppEditors/FlatCAMGeoEditor.py:1397
msgid "Flip action was not executed"
msgstr "Flip action was not executed"

#: AppEditors/FlatCAMGeoEditor.py:1415 AppEditors/FlatCAMGrbEditor.py:6053
msgid "No shape selected. Please Select a shape to shear/skew!"
msgstr "No shape selected. Please Select a shape to shear/skew!"

#: AppEditors/FlatCAMGeoEditor.py:1418 AppEditors/FlatCAMGrbEditor.py:6056
#: AppTools/ToolTransform.py:801
msgid "Applying Skew"
msgstr "Applying Skew"

#: AppEditors/FlatCAMGeoEditor.py:1441 AppEditors/FlatCAMGrbEditor.py:6090
msgid "Skew on the X axis done"
msgstr "Skew on the X axis done"

#: AppEditors/FlatCAMGeoEditor.py:1443 AppEditors/FlatCAMGrbEditor.py:6092
msgid "Skew on the Y axis done"
msgstr "Skew on the Y axis done"

#: AppEditors/FlatCAMGeoEditor.py:1446
msgid "Skew action was not executed"
msgstr "Skew action was not executed"

#: AppEditors/FlatCAMGeoEditor.py:1468 AppEditors/FlatCAMGrbEditor.py:6114
msgid "No shape selected. Please Select a shape to scale!"
msgstr "No shape selected. Please Select a shape to scale!"

#: AppEditors/FlatCAMGeoEditor.py:1471 AppEditors/FlatCAMGrbEditor.py:6117
#: AppTools/ToolTransform.py:847
msgid "Applying Scale"
msgstr "Applying Scale"

#: AppEditors/FlatCAMGeoEditor.py:1503 AppEditors/FlatCAMGrbEditor.py:6154
msgid "Scale on the X axis done"
msgstr "Scale on the X axis done"

#: AppEditors/FlatCAMGeoEditor.py:1505 AppEditors/FlatCAMGrbEditor.py:6156
msgid "Scale on the Y axis done"
msgstr "Scale on the Y axis done"

#: AppEditors/FlatCAMGeoEditor.py:1507
msgid "Scale action was not executed"
msgstr "Scale action was not executed"

#: AppEditors/FlatCAMGeoEditor.py:1522 AppEditors/FlatCAMGrbEditor.py:6173
msgid "No shape selected. Please Select a shape to offset!"
msgstr "No shape selected. Please Select a shape to offset!"

#: AppEditors/FlatCAMGeoEditor.py:1525 AppEditors/FlatCAMGrbEditor.py:6176
#: AppTools/ToolTransform.py:897
msgid "Applying Offset"
msgstr "Applying Offset"

#: AppEditors/FlatCAMGeoEditor.py:1535 AppEditors/FlatCAMGrbEditor.py:6197
msgid "Offset on the X axis done"
msgstr "Offset on the X axis done"

#: AppEditors/FlatCAMGeoEditor.py:1537 AppEditors/FlatCAMGrbEditor.py:6199
msgid "Offset on the Y axis done"
msgstr "Offset on the Y axis done"

#: AppEditors/FlatCAMGeoEditor.py:1540
msgid "Offset action was not executed"
msgstr "Offset action was not executed"

#: AppEditors/FlatCAMGeoEditor.py:1544 AppEditors/FlatCAMGrbEditor.py:6206
msgid "Rotate ..."
msgstr "Rotate ..."

#: AppEditors/FlatCAMGeoEditor.py:1545 AppEditors/FlatCAMGeoEditor.py:1600
#: AppEditors/FlatCAMGeoEditor.py:1617 AppEditors/FlatCAMGrbEditor.py:6207
#: AppEditors/FlatCAMGrbEditor.py:6256 AppEditors/FlatCAMGrbEditor.py:6271
msgid "Enter an Angle Value (degrees)"
msgstr "Enter an Angle Value (degrees)"

#: AppEditors/FlatCAMGeoEditor.py:1554 AppEditors/FlatCAMGrbEditor.py:6215
msgid "Geometry shape rotate done"
msgstr "Geometry shape rotate done"

#: AppEditors/FlatCAMGeoEditor.py:1558 AppEditors/FlatCAMGrbEditor.py:6218
msgid "Geometry shape rotate cancelled"
msgstr "Geometry shape rotate cancelled"

#: AppEditors/FlatCAMGeoEditor.py:1563 AppEditors/FlatCAMGrbEditor.py:6223
msgid "Offset on X axis ..."
msgstr "Offset on X axis ..."

#: AppEditors/FlatCAMGeoEditor.py:1564 AppEditors/FlatCAMGeoEditor.py:1583
#: AppEditors/FlatCAMGrbEditor.py:6224 AppEditors/FlatCAMGrbEditor.py:6241
msgid "Enter a distance Value"
msgstr "Enter a distance Value"

#: AppEditors/FlatCAMGeoEditor.py:1573 AppEditors/FlatCAMGrbEditor.py:6232
msgid "Geometry shape offset on X axis done"
msgstr "Geometry shape offset on X axis done"

#: AppEditors/FlatCAMGeoEditor.py:1577 AppEditors/FlatCAMGrbEditor.py:6235
msgid "Geometry shape offset X cancelled"
msgstr "Geometry shape offset X cancelled"

#: AppEditors/FlatCAMGeoEditor.py:1582 AppEditors/FlatCAMGrbEditor.py:6240
msgid "Offset on Y axis ..."
msgstr "Offset on Y axis ..."

#: AppEditors/FlatCAMGeoEditor.py:1592 AppEditors/FlatCAMGrbEditor.py:6249
msgid "Geometry shape offset on Y axis done"
msgstr "Geometry shape offset on Y axis done"

#: AppEditors/FlatCAMGeoEditor.py:1596
msgid "Geometry shape offset on Y axis canceled"
msgstr "Geometry shape offset on Y axis canceled"

#: AppEditors/FlatCAMGeoEditor.py:1599 AppEditors/FlatCAMGrbEditor.py:6255
msgid "Skew on X axis ..."
msgstr "Skew on X axis ..."

#: AppEditors/FlatCAMGeoEditor.py:1609 AppEditors/FlatCAMGrbEditor.py:6264
msgid "Geometry shape skew on X axis done"
msgstr "Geometry shape skew on X axis done"

#: AppEditors/FlatCAMGeoEditor.py:1613
msgid "Geometry shape skew on X axis canceled"
msgstr "Geometry shape skew on X axis canceled"

#: AppEditors/FlatCAMGeoEditor.py:1616 AppEditors/FlatCAMGrbEditor.py:6270
msgid "Skew on Y axis ..."
msgstr "Skew on Y axis ..."

#: AppEditors/FlatCAMGeoEditor.py:1626 AppEditors/FlatCAMGrbEditor.py:6279
msgid "Geometry shape skew on Y axis done"
msgstr "Geometry shape skew on Y axis done"

#: AppEditors/FlatCAMGeoEditor.py:1630
msgid "Geometry shape skew on Y axis canceled"
msgstr "Geometry shape skew on Y axis canceled"

#: AppEditors/FlatCAMGeoEditor.py:2007 AppEditors/FlatCAMGeoEditor.py:2078
#: AppEditors/FlatCAMGrbEditor.py:1435 AppEditors/FlatCAMGrbEditor.py:1513
msgid "Click on Center point ..."
msgstr "Click on Center point ..."

#: AppEditors/FlatCAMGeoEditor.py:2020 AppEditors/FlatCAMGrbEditor.py:1445
msgid "Click on Perimeter point to complete ..."
msgstr "Click on Perimeter point to complete ..."

#: AppEditors/FlatCAMGeoEditor.py:2052
msgid "Done. Adding Circle completed."
msgstr "Done. Adding Circle completed."

#: AppEditors/FlatCAMGeoEditor.py:2106 AppEditors/FlatCAMGrbEditor.py:1546
msgid "Click on Start point ..."
msgstr "Click on Start point ..."

#: AppEditors/FlatCAMGeoEditor.py:2108 AppEditors/FlatCAMGrbEditor.py:1548
msgid "Click on Point3 ..."
msgstr "Click on Point3 ..."

#: AppEditors/FlatCAMGeoEditor.py:2110 AppEditors/FlatCAMGrbEditor.py:1550
msgid "Click on Stop point ..."
msgstr "Click on Stop point ..."

#: AppEditors/FlatCAMGeoEditor.py:2115 AppEditors/FlatCAMGrbEditor.py:1555
msgid "Click on Stop point to complete ..."
msgstr "Click on Stop point to complete ..."

#: AppEditors/FlatCAMGeoEditor.py:2117 AppEditors/FlatCAMGrbEditor.py:1557
msgid "Click on Point2 to complete ..."
msgstr "Click on Point2 to complete ..."

#: AppEditors/FlatCAMGeoEditor.py:2119 AppEditors/FlatCAMGrbEditor.py:1559
msgid "Click on Center point to complete ..."
msgstr "Click on Center point to complete ..."

#: AppEditors/FlatCAMGeoEditor.py:2131
#, python-format
msgid "Direction: %s"
msgstr "Direction: %s"

#: AppEditors/FlatCAMGeoEditor.py:2145 AppEditors/FlatCAMGrbEditor.py:1585
msgid "Mode: Start -> Stop -> Center. Click on Start point ..."
msgstr "Mode: Start -> Stop -> Center. Click on Start point ..."

#: AppEditors/FlatCAMGeoEditor.py:2148 AppEditors/FlatCAMGrbEditor.py:1588
msgid "Mode: Point1 -> Point3 -> Point2. Click on Point1 ..."
msgstr "Mode: Point1 -> Point3 -> Point2. Click on Point1 ..."

#: AppEditors/FlatCAMGeoEditor.py:2151 AppEditors/FlatCAMGrbEditor.py:1591
msgid "Mode: Center -> Start -> Stop. Click on Center point ..."
msgstr "Mode: Center -> Start -> Stop. Click on Center point ..."

#: AppEditors/FlatCAMGeoEditor.py:2292
msgid "Done. Arc completed."
msgstr "Done. Arc completed."

#: AppEditors/FlatCAMGeoEditor.py:2323 AppEditors/FlatCAMGeoEditor.py:2396
msgid "Click on 1st corner ..."
msgstr "Click on 1st corner ..."

#: AppEditors/FlatCAMGeoEditor.py:2335
msgid "Click on opposite corner to complete ..."
msgstr "Click on opposite corner to complete ..."

#: AppEditors/FlatCAMGeoEditor.py:2365
msgid "Done. Rectangle completed."
msgstr "Done. Rectangle completed."

#: AppEditors/FlatCAMGeoEditor.py:2409 AppTools/ToolNCC.py:1734
#: AppTools/ToolPaint.py:1627 Common.py:303
msgid "Click on next Point or click right mouse button to complete ..."
msgstr "Click on next Point or click right mouse button to complete ..."

#: AppEditors/FlatCAMGeoEditor.py:2440
msgid "Done. Polygon completed."
msgstr "Done. Polygon completed."

#: AppEditors/FlatCAMGeoEditor.py:2454 AppEditors/FlatCAMGeoEditor.py:2519
#: AppEditors/FlatCAMGrbEditor.py:1111 AppEditors/FlatCAMGrbEditor.py:1322
msgid "Backtracked one point ..."
msgstr "Backtracked one point ..."

#: AppEditors/FlatCAMGeoEditor.py:2497
msgid "Done. Path completed."
msgstr "Done. Path completed."

#: AppEditors/FlatCAMGeoEditor.py:2656
msgid "No shape selected. Select a shape to explode"
msgstr "No shape selected. Select a shape to explode"

#: AppEditors/FlatCAMGeoEditor.py:2689
msgid "Done. Polygons exploded into lines."
msgstr "Done. Polygons exploded into lines."

#: AppEditors/FlatCAMGeoEditor.py:2721
msgid "MOVE: No shape selected. Select a shape to move"
msgstr "MOVE: No shape selected. Select a shape to move"

#: AppEditors/FlatCAMGeoEditor.py:2724 AppEditors/FlatCAMGeoEditor.py:2744
msgid " MOVE: Click on reference point ..."
msgstr " MOVE: Click on reference point ..."

#: AppEditors/FlatCAMGeoEditor.py:2729
msgid " Click on destination point ..."
msgstr " Click on destination point ..."

#: AppEditors/FlatCAMGeoEditor.py:2769
msgid "Done. Geometry(s) Move completed."
msgstr "Done. Geometry(s) Move completed."

#: AppEditors/FlatCAMGeoEditor.py:2902
msgid "Done. Geometry(s) Copy completed."
msgstr "Done. Geometry(s) Copy completed."

#: AppEditors/FlatCAMGeoEditor.py:2933 AppEditors/FlatCAMGrbEditor.py:897
msgid "Click on 1st point ..."
msgstr "Click on 1st point ..."

#: AppEditors/FlatCAMGeoEditor.py:2957
msgid ""
"Font not supported. Only Regular, Bold, Italic and BoldItalic are supported. "
"Error"
msgstr ""
"Font not supported. Only Regular, Bold, Italic and BoldItalic are supported. "
"Error"

#: AppEditors/FlatCAMGeoEditor.py:2965
msgid "No text to add."
msgstr "No text to add."

#: AppEditors/FlatCAMGeoEditor.py:2975
msgid " Done. Adding Text completed."
msgstr " Done. Adding Text completed."

#: AppEditors/FlatCAMGeoEditor.py:3012
msgid "Create buffer geometry ..."
msgstr "Create buffer geometry ..."

#: AppEditors/FlatCAMGeoEditor.py:3047 AppEditors/FlatCAMGrbEditor.py:5138
msgid "Done. Buffer Tool completed."
msgstr "Done. Buffer Tool completed."

#: AppEditors/FlatCAMGeoEditor.py:3075
msgid "Done. Buffer Int Tool completed."
msgstr "Done. Buffer Int Tool completed."

#: AppEditors/FlatCAMGeoEditor.py:3103
msgid "Done. Buffer Ext Tool completed."
msgstr "Done. Buffer Ext Tool completed."

#: AppEditors/FlatCAMGeoEditor.py:3152 AppEditors/FlatCAMGrbEditor.py:2151
msgid "Select a shape to act as deletion area ..."
msgstr "Select a shape to act as deletion area ..."

#: AppEditors/FlatCAMGeoEditor.py:3154 AppEditors/FlatCAMGeoEditor.py:3180
#: AppEditors/FlatCAMGeoEditor.py:3186 AppEditors/FlatCAMGrbEditor.py:2153
msgid "Click to pick-up the erase shape..."
msgstr "Click to pick-up the erase shape..."

#: AppEditors/FlatCAMGeoEditor.py:3190 AppEditors/FlatCAMGrbEditor.py:2212
msgid "Click to erase ..."
msgstr "Click to erase ..."

#: AppEditors/FlatCAMGeoEditor.py:3219 AppEditors/FlatCAMGrbEditor.py:2245
msgid "Done. Eraser tool action completed."
msgstr "Done. Eraser tool action completed."

#: AppEditors/FlatCAMGeoEditor.py:3269
msgid "Create Paint geometry ..."
msgstr "Create Paint geometry ..."

#: AppEditors/FlatCAMGeoEditor.py:3282 AppEditors/FlatCAMGrbEditor.py:2408
msgid "Shape transformations ..."
msgstr "Shape transformations ..."

#: AppEditors/FlatCAMGeoEditor.py:3338
#: AppGUI/preferences/geometry/GeometryEditorPrefGroupUI.py:27
msgid "Geometry Editor"
msgstr "Geometry Editor"

#: AppEditors/FlatCAMGeoEditor.py:3344 AppEditors/FlatCAMGrbEditor.py:2486
#: AppEditors/FlatCAMGrbEditor.py:3943 AppGUI/ObjectUI.py:263
#: AppGUI/ObjectUI.py:1599 AppGUI/ObjectUI.py:2456 AppTools/ToolCutOut.py:95
msgid "Type"
msgstr "Type"

#: AppEditors/FlatCAMGeoEditor.py:3344 AppGUI/ObjectUI.py:218
#: AppGUI/ObjectUI.py:742 AppGUI/ObjectUI.py:1535 AppGUI/ObjectUI.py:2365
#: AppGUI/ObjectUI.py:2669 AppGUI/ObjectUI.py:2736
#: AppTools/ToolCalibration.py:234 AppTools/ToolFiducials.py:73
msgid "Name"
msgstr "Name"

#: AppEditors/FlatCAMGeoEditor.py:3596
msgid "Ring"
msgstr "Ring"

#: AppEditors/FlatCAMGeoEditor.py:3598
msgid "Line"
msgstr "Line"

#: AppEditors/FlatCAMGeoEditor.py:3600 AppGUI/MainGUI.py:1403
#: AppGUI/ObjectUI.py:1371 AppGUI/ObjectUI.py:2205
#: AppGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:218
#: AppGUI/preferences/tools/ToolsNCCPrefGroupUI.py:328
#: AppGUI/preferences/tools/ToolsPaintPrefGroupUI.py:292
#: AppTools/ToolNCC.py:584 AppTools/ToolPaint.py:527
msgid "Polygon"
msgstr "Polygon"

#: AppEditors/FlatCAMGeoEditor.py:3602
msgid "Multi-Line"
msgstr "Multi-Line"

#: AppEditors/FlatCAMGeoEditor.py:3604
msgid "Multi-Polygon"
msgstr "Multi-Polygon"

#: AppEditors/FlatCAMGeoEditor.py:3611
msgid "Geo Elem"
msgstr "Geo Elem"

#: AppEditors/FlatCAMGeoEditor.py:4064
msgid "Editing MultiGeo Geometry, tool"
msgstr "Editing MultiGeo Geometry, tool"

#: AppEditors/FlatCAMGeoEditor.py:4066
msgid "with diameter"
msgstr "with diameter"

#: AppEditors/FlatCAMGeoEditor.py:4501 AppGUI/MainGUI.py:2967
#: AppGUI/MainGUI.py:3013 AppGUI/MainGUI.py:3031 AppGUI/MainGUI.py:3175
#: AppGUI/MainGUI.py:3214 AppGUI/MainGUI.py:3226 AppGUI/MainGUI.py:3243
msgid "Click on target point."
msgstr "Click on target point."

#: AppEditors/FlatCAMGeoEditor.py:4815 AppEditors/FlatCAMGeoEditor.py:4850
msgid "A selection of at least 2 geo items is required to do Intersection."
msgstr "A selection of at least 2 geo items is required to do Intersection."

#: AppEditors/FlatCAMGeoEditor.py:4936 AppEditors/FlatCAMGeoEditor.py:5040
msgid ""
"Negative buffer value is not accepted. Use Buffer interior to generate an "
"'inside' shape"
msgstr ""
"Negative buffer value is not accepted. Use Buffer interior to generate an "
"'inside' shape"

#: AppEditors/FlatCAMGeoEditor.py:4946 AppEditors/FlatCAMGeoEditor.py:4999
#: AppEditors/FlatCAMGeoEditor.py:5049
msgid "Nothing selected for buffering."
msgstr "Nothing selected for buffering."

#: AppEditors/FlatCAMGeoEditor.py:4951 AppEditors/FlatCAMGeoEditor.py:5003
#: AppEditors/FlatCAMGeoEditor.py:5054
msgid "Invalid distance for buffering."
msgstr "Invalid distance for buffering."

#: AppEditors/FlatCAMGeoEditor.py:4975 AppEditors/FlatCAMGeoEditor.py:5074
msgid "Failed, the result is empty. Choose a different buffer value."
msgstr "Failed, the result is empty. Choose a different buffer value."

#: AppEditors/FlatCAMGeoEditor.py:4986
msgid "Full buffer geometry created."
msgstr "Full buffer geometry created."

#: AppEditors/FlatCAMGeoEditor.py:4992
msgid "Negative buffer value is not accepted."
msgstr "Negative buffer value is not accepted."

#: AppEditors/FlatCAMGeoEditor.py:5023
msgid "Failed, the result is empty. Choose a smaller buffer value."
msgstr "Failed, the result is empty. Choose a smaller buffer value."

#: AppEditors/FlatCAMGeoEditor.py:5033
msgid "Interior buffer geometry created."
msgstr "Interior buffer geometry created."

#: AppEditors/FlatCAMGeoEditor.py:5084
msgid "Exterior buffer geometry created."
msgstr "Exterior buffer geometry created."

#: AppEditors/FlatCAMGeoEditor.py:5090
#, python-format
msgid "Could not do Paint. Overlap value has to be less than 100%%."
msgstr "Could not do Paint. Overlap value has to be less than 100%%."

#: AppEditors/FlatCAMGeoEditor.py:5097
msgid "Nothing selected for painting."
msgstr "Nothing selected for painting."

#: AppEditors/FlatCAMGeoEditor.py:5103
msgid "Invalid value for"
msgstr "Invalid value for"

#: AppEditors/FlatCAMGeoEditor.py:5162
msgid ""
"Could not do Paint. Try a different combination of parameters. Or a "
"different method of Paint"
msgstr ""
"Could not do Paint. Try a different combination of parameters. Or a "
"different method of Paint"

#: AppEditors/FlatCAMGeoEditor.py:5173
msgid "Paint done."
msgstr "Paint done."

#: AppEditors/FlatCAMGrbEditor.py:211
msgid "To add an Pad first select a aperture in Aperture Table"
msgstr "To add an Pad first select a aperture in Aperture Table"

#: AppEditors/FlatCAMGrbEditor.py:218 AppEditors/FlatCAMGrbEditor.py:418
msgid "Aperture size is zero. It needs to be greater than zero."
msgstr "Aperture size is zero. It needs to be greater than zero."

#: AppEditors/FlatCAMGrbEditor.py:371 AppEditors/FlatCAMGrbEditor.py:684
msgid ""
"Incompatible aperture type. Select an aperture with type 'C', 'R' or 'O'."
msgstr ""
"Incompatible aperture type. Select an aperture with type 'C', 'R' or 'O'."

#: AppEditors/FlatCAMGrbEditor.py:383
msgid "Done. Adding Pad completed."
msgstr "Done. Adding Pad completed."

#: AppEditors/FlatCAMGrbEditor.py:410
msgid "To add an Pad Array first select a aperture in Aperture Table"
msgstr "To add an Pad Array first select a aperture in Aperture Table"

#: AppEditors/FlatCAMGrbEditor.py:490
msgid "Click on the Pad Circular Array Start position"
msgstr "Click on the Pad Circular Array Start position"

#: AppEditors/FlatCAMGrbEditor.py:710
msgid "Too many Pads for the selected spacing angle."
msgstr "Too many Pads for the selected spacing angle."

#: AppEditors/FlatCAMGrbEditor.py:733
msgid "Done. Pad Array added."
msgstr "Done. Pad Array added."

#: AppEditors/FlatCAMGrbEditor.py:758
msgid "Select shape(s) and then click ..."
msgstr "Select shape(s) and then click ..."

#: AppEditors/FlatCAMGrbEditor.py:770
msgid "Failed. Nothing selected."
msgstr "Failed. Nothing selected."

#: AppEditors/FlatCAMGrbEditor.py:786
msgid ""
"Failed. Poligonize works only on geometries belonging to the same aperture."
msgstr ""
"Failed. Poligonize works only on geometries belonging to the same aperture."

#: AppEditors/FlatCAMGrbEditor.py:840
msgid "Done. Poligonize completed."
msgstr "Done. Poligonize completed."

#: AppEditors/FlatCAMGrbEditor.py:895 AppEditors/FlatCAMGrbEditor.py:1128
#: AppEditors/FlatCAMGrbEditor.py:1152
msgid "Corner Mode 1: 45 degrees ..."
msgstr "Corner Mode 1: 45 degrees ..."

#: AppEditors/FlatCAMGrbEditor.py:907 AppEditors/FlatCAMGrbEditor.py:1237
msgid "Click on next Point or click Right mouse button to complete ..."
msgstr "Click on next Point or click Right mouse button to complete ..."

#: AppEditors/FlatCAMGrbEditor.py:1116 AppEditors/FlatCAMGrbEditor.py:1149
msgid "Corner Mode 2: Reverse 45 degrees ..."
msgstr "Corner Mode 2: Reverse 45 degrees ..."

#: AppEditors/FlatCAMGrbEditor.py:1119 AppEditors/FlatCAMGrbEditor.py:1146
msgid "Corner Mode 3: 90 degrees ..."
msgstr "Corner Mode 3: 90 degrees ..."

#: AppEditors/FlatCAMGrbEditor.py:1122 AppEditors/FlatCAMGrbEditor.py:1143
msgid "Corner Mode 4: Reverse 90 degrees ..."
msgstr "Corner Mode 4: Reverse 90 degrees ..."

#: AppEditors/FlatCAMGrbEditor.py:1125 AppEditors/FlatCAMGrbEditor.py:1140
msgid "Corner Mode 5: Free angle ..."
msgstr "Corner Mode 5: Free angle ..."

#: AppEditors/FlatCAMGrbEditor.py:1182 AppEditors/FlatCAMGrbEditor.py:1358
#: AppEditors/FlatCAMGrbEditor.py:1397
msgid "Track Mode 1: 45 degrees ..."
msgstr "Track Mode 1: 45 degrees ..."

#: AppEditors/FlatCAMGrbEditor.py:1338 AppEditors/FlatCAMGrbEditor.py:1392
msgid "Track Mode 2: Reverse 45 degrees ..."
msgstr "Track Mode 2: Reverse 45 degrees ..."

#: AppEditors/FlatCAMGrbEditor.py:1343 AppEditors/FlatCAMGrbEditor.py:1387
msgid "Track Mode 3: 90 degrees ..."
msgstr "Track Mode 3: 90 degrees ..."

#: AppEditors/FlatCAMGrbEditor.py:1348 AppEditors/FlatCAMGrbEditor.py:1382
msgid "Track Mode 4: Reverse 90 degrees ..."
msgstr "Track Mode 4: Reverse 90 degrees ..."

#: AppEditors/FlatCAMGrbEditor.py:1353 AppEditors/FlatCAMGrbEditor.py:1377
msgid "Track Mode 5: Free angle ..."
msgstr "Track Mode 5: Free angle ..."

#: AppEditors/FlatCAMGrbEditor.py:1778
msgid "Scale the selected Gerber apertures ..."
msgstr "Scale the selected Gerber apertures ..."

#: AppEditors/FlatCAMGrbEditor.py:1820
msgid "Buffer the selected apertures ..."
msgstr "Buffer the selected apertures ..."

#: AppEditors/FlatCAMGrbEditor.py:1862
msgid "Mark polygon areas in the edited Gerber ..."
msgstr "Mark polygon areas in the edited Gerber ..."

#: AppEditors/FlatCAMGrbEditor.py:1928
msgid "Nothing selected to move"
msgstr "Nothing selected to move"

#: AppEditors/FlatCAMGrbEditor.py:2053
msgid "Done. Apertures Move completed."
msgstr "Done. Apertures Move completed."

#: AppEditors/FlatCAMGrbEditor.py:2135
msgid "Done. Apertures copied."
msgstr "Done. Apertures copied."

#: AppEditors/FlatCAMGrbEditor.py:2453 AppGUI/MainGUI.py:1434
#: AppGUI/preferences/gerber/GerberEditorPrefGroupUI.py:27
msgid "Gerber Editor"
msgstr "Gerber Editor"

#: AppEditors/FlatCAMGrbEditor.py:2473 AppGUI/ObjectUI.py:228
#: AppTools/ToolProperties.py:159
msgid "Apertures"
msgstr "Apertures"

#: AppEditors/FlatCAMGrbEditor.py:2475 AppGUI/ObjectUI.py:230
msgid "Apertures Table for the Gerber Object."
msgstr "Apertures Table for the Gerber Object."

#: AppEditors/FlatCAMGrbEditor.py:2486 AppEditors/FlatCAMGrbEditor.py:3943
#: AppGUI/ObjectUI.py:263
msgid "Code"
msgstr "Code"

#: AppEditors/FlatCAMGrbEditor.py:2486 AppEditors/FlatCAMGrbEditor.py:3943
#: AppGUI/ObjectUI.py:263
#: AppGUI/preferences/general/GeneralAPPSetGroupUI.py:103
#: AppGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:167
#: AppGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:196
#: AppGUI/preferences/tools/Tools2FiducialsPrefGroupUI.py:43
#: AppTools/ToolCopperThieving.py:261 AppTools/ToolCopperThieving.py:301
#: AppTools/ToolFiducials.py:156
msgid "Size"
msgstr "Size"

#: AppEditors/FlatCAMGrbEditor.py:2486 AppEditors/FlatCAMGrbEditor.py:3943
#: AppGUI/ObjectUI.py:263
msgid "Dim"
msgstr "Dim"

#: AppEditors/FlatCAMGrbEditor.py:2491 AppGUI/ObjectUI.py:267
msgid "Index"
msgstr "Index"

#: AppEditors/FlatCAMGrbEditor.py:2493 AppEditors/FlatCAMGrbEditor.py:2522
#: AppGUI/ObjectUI.py:269
msgid "Aperture Code"
msgstr "Aperture Code"

#: AppEditors/FlatCAMGrbEditor.py:2495 AppGUI/ObjectUI.py:271
msgid "Type of aperture: circular, rectangle, macros etc"
msgstr "Type of aperture: circular, rectangle, macros etc"

#: AppEditors/FlatCAMGrbEditor.py:2497 AppGUI/ObjectUI.py:273
msgid "Aperture Size:"
msgstr "Aperture Size:"

#: AppEditors/FlatCAMGrbEditor.py:2499 AppGUI/ObjectUI.py:275
msgid ""
"Aperture Dimensions:\n"
" - (width, height) for R, O type.\n"
" - (dia, nVertices) for P type"
msgstr ""
"Aperture Dimensions:\n"
" - (width, height) for R, O type.\n"
" - (dia, nVertices) for P type"

#: AppEditors/FlatCAMGrbEditor.py:2523
#: AppGUI/preferences/gerber/GerberEditorPrefGroupUI.py:58
msgid "Code for the new aperture"
msgstr "Code for the new aperture"

#: AppEditors/FlatCAMGrbEditor.py:2532
msgid "Aperture Size"
msgstr "Aperture Size"

#: AppEditors/FlatCAMGrbEditor.py:2534
msgid ""
"Size for the new aperture.\n"
"If aperture type is 'R' or 'O' then\n"
"this value is automatically\n"
"calculated as:\n"
"sqrt(width**2 + height**2)"
msgstr ""
"Size for the new aperture.\n"
"If aperture type is 'R' or 'O' then\n"
"this value is automatically\n"
"calculated as:\n"
"sqrt(width**2 + height**2)"

#: AppEditors/FlatCAMGrbEditor.py:2548
msgid "Aperture Type"
msgstr "Aperture Type"

#: AppEditors/FlatCAMGrbEditor.py:2550
msgid ""
"Select the type of new aperture. Can be:\n"
"C = circular\n"
"R = rectangular\n"
"O = oblong"
msgstr ""
"Select the type of new aperture. Can be:\n"
"C = circular\n"
"R = rectangular\n"
"O = oblong"

#: AppEditors/FlatCAMGrbEditor.py:2561
msgid "Aperture Dim"
msgstr "Aperture Dim"

#: AppEditors/FlatCAMGrbEditor.py:2563
msgid ""
"Dimensions for the new aperture.\n"
"Active only for rectangular apertures (type R).\n"
"The format is (width, height)"
msgstr ""
"Dimensions for the new aperture.\n"
"Active only for rectangular apertures (type R).\n"
"The format is (width, height)"

#: AppEditors/FlatCAMGrbEditor.py:2572
msgid "Add/Delete Aperture"
msgstr "Add/Delete Aperture"

#: AppEditors/FlatCAMGrbEditor.py:2574
msgid "Add/Delete an aperture in the aperture table"
msgstr "Add/Delete an aperture in the aperture table"

#: AppEditors/FlatCAMGrbEditor.py:2583
msgid "Add a new aperture to the aperture list."
msgstr "Add a new aperture to the aperture list."

#: AppEditors/FlatCAMGrbEditor.py:2586 AppEditors/FlatCAMGrbEditor.py:2734
#: AppGUI/MainGUI.py:753 AppGUI/MainGUI.py:1069 AppGUI/MainGUI.py:1485
#: AppGUI/MainGUI.py:2030 AppGUI/MainGUI.py:4400 AppGUI/ObjectUI.py:1725
#: AppObjects/FlatCAMGeometry.py:556 AppTools/ToolNCC.py:316
#: AppTools/ToolNCC.py:637 AppTools/ToolPaint.py:298 AppTools/ToolPaint.py:681
#: AppTools/ToolSolderPaste.py:128 AppTools/ToolSolderPaste.py:600
#: App_Main.py:5845
msgid "Delete"
msgstr "Delete"

#: AppEditors/FlatCAMGrbEditor.py:2588
msgid "Delete a aperture in the aperture list"
msgstr "Delete a aperture in the aperture list"

#: AppEditors/FlatCAMGrbEditor.py:2605
msgid "Buffer Aperture"
msgstr "Buffer Aperture"

#: AppEditors/FlatCAMGrbEditor.py:2607
msgid "Buffer a aperture in the aperture list"
msgstr "Buffer a aperture in the aperture list"

#: AppEditors/FlatCAMGrbEditor.py:2620
#: AppGUI/preferences/gerber/GerberEditorPrefGroupUI.py:194
msgid "Buffer distance"
msgstr "Buffer distance"

#: AppEditors/FlatCAMGrbEditor.py:2621
msgid "Buffer corner"
msgstr "Buffer corner"

#: AppEditors/FlatCAMGrbEditor.py:2623
msgid ""
"There are 3 types of corners:\n"
" - 'Round': the corner is rounded.\n"
" - 'Square': the corner is met in a sharp angle.\n"
" - 'Beveled': the corner is a line that directly connects the features "
"meeting in the corner"
msgstr ""
"There are 3 types of corners:\n"
" - 'Round': the corner is rounded.\n"
" - 'Square': the corner is met in a sharp angle.\n"
" - 'Beveled': the corner is a line that directly connects the features "
"meeting in the corner"

#: AppEditors/FlatCAMGrbEditor.py:2638 AppGUI/MainGUI.py:1056
#: AppGUI/MainGUI.py:1411 AppGUI/MainGUI.py:1454 AppGUI/MainGUI.py:2018
#: AppGUI/MainGUI.py:4397
#: AppGUI/preferences/tools/ToolsTransformPrefGroupUI.py:200
#: AppTools/ToolTransform.py:29
msgid "Buffer"
msgstr "Buffer"

#: AppEditors/FlatCAMGrbEditor.py:2653
msgid "Scale Aperture"
msgstr "Scale Aperture"

#: AppEditors/FlatCAMGrbEditor.py:2655
msgid "Scale a aperture in the aperture list"
msgstr "Scale a aperture in the aperture list"

#: AppEditors/FlatCAMGrbEditor.py:2663
#: AppGUI/preferences/gerber/GerberEditorPrefGroupUI.py:209
msgid "Scale factor"
msgstr "Scale factor"

#: AppEditors/FlatCAMGrbEditor.py:2665
msgid ""
"The factor by which to scale the selected aperture.\n"
"Values can be between 0.0000 and 999.9999"
msgstr ""
"The factor by which to scale the selected aperture.\n"
"Values can be between 0.0000 and 999.9999"

#: AppEditors/FlatCAMGrbEditor.py:2693
msgid "Mark polygons"
msgstr "Mark polygons"

#: AppEditors/FlatCAMGrbEditor.py:2695
msgid "Mark the polygon areas."
msgstr "Mark the polygon areas."

#: AppEditors/FlatCAMGrbEditor.py:2703
msgid "Area UPPER threshold"
msgstr "Area UPPER threshold"

#: AppEditors/FlatCAMGrbEditor.py:2705
msgid ""
"The threshold value, all areas less than this are marked.\n"
"Can have a value between 0.0000 and 9999.9999"
msgstr ""
"The threshold value, all areas less than this are marked.\n"
"Can have a value between 0.0000 and 9999.9999"

#: AppEditors/FlatCAMGrbEditor.py:2712
msgid "Area LOWER threshold"
msgstr "Area LOWER threshold"

#: AppEditors/FlatCAMGrbEditor.py:2714
msgid ""
"The threshold value, all areas more than this are marked.\n"
"Can have a value between 0.0000 and 9999.9999"
msgstr ""
"The threshold value, all areas more than this are marked.\n"
"Can have a value between 0.0000 and 9999.9999"

#: AppEditors/FlatCAMGrbEditor.py:2728
msgid "Mark"
msgstr "Mark"

#: AppEditors/FlatCAMGrbEditor.py:2730
msgid "Mark the polygons that fit within limits."
msgstr "Mark the polygons that fit within limits."

#: AppEditors/FlatCAMGrbEditor.py:2736
msgid "Delete all the marked polygons."
msgstr "Delete all the marked polygons."

#: AppEditors/FlatCAMGrbEditor.py:2742
msgid "Clear all the markings."
msgstr "Clear all the markings."

#: AppEditors/FlatCAMGrbEditor.py:2762 AppGUI/MainGUI.py:1041
#: AppGUI/MainGUI.py:2003 AppGUI/MainGUI.py:4397
msgid "Add Pad Array"
msgstr "Add Pad Array"

#: AppEditors/FlatCAMGrbEditor.py:2764
msgid "Add an array of pads (linear or circular array)"
msgstr "Add an array of pads (linear or circular array)"

#: AppEditors/FlatCAMGrbEditor.py:2770
msgid ""
"Select the type of pads array to create.\n"
"It can be Linear X(Y) or Circular"
msgstr ""
"Select the type of pads array to create.\n"
"It can be Linear X(Y) or Circular"

#: AppEditors/FlatCAMGrbEditor.py:2781
#: AppGUI/preferences/gerber/GerberEditorPrefGroupUI.py:95
msgid "Nr of pads"
msgstr "Nr of pads"

#: AppEditors/FlatCAMGrbEditor.py:2783
#: AppGUI/preferences/gerber/GerberEditorPrefGroupUI.py:97
msgid "Specify how many pads to be in the array."
msgstr "Specify how many pads to be in the array."

#: AppEditors/FlatCAMGrbEditor.py:2832
msgid ""
"Angle at which the linear array is placed.\n"
"The precision is of max 2 decimals.\n"
"Min value is: -359.99 degrees.\n"
"Max value is:  360.00 degrees."
msgstr ""
"Angle at which the linear array is placed.\n"
"The precision is of max 2 decimals.\n"
"Min value is: -359.99 degrees.\n"
"Max value is:  360.00 degrees."

#: AppEditors/FlatCAMGrbEditor.py:3326 AppEditors/FlatCAMGrbEditor.py:3330
msgid "Aperture code value is missing or wrong format. Add it and retry."
msgstr "Aperture code value is missing or wrong format. Add it and retry."

#: AppEditors/FlatCAMGrbEditor.py:3366
msgid ""
"Aperture dimensions value is missing or wrong format. Add it in format "
"(width, height) and retry."
msgstr ""
"Aperture dimensions value is missing or wrong format. Add it in format "
"(width, height) and retry."

#: AppEditors/FlatCAMGrbEditor.py:3379
msgid "Aperture size value is missing or wrong format. Add it and retry."
msgstr "Aperture size value is missing or wrong format. Add it and retry."

#: AppEditors/FlatCAMGrbEditor.py:3390
msgid "Aperture already in the aperture table."
msgstr "Aperture already in the aperture table."

#: AppEditors/FlatCAMGrbEditor.py:3397
msgid "Added new aperture with code"
msgstr "Added new aperture with code"

#: AppEditors/FlatCAMGrbEditor.py:3429
msgid " Select an aperture in Aperture Table"
msgstr " Select an aperture in Aperture Table"

#: AppEditors/FlatCAMGrbEditor.py:3437
msgid "Select an aperture in Aperture Table -->"
msgstr "Select an aperture in Aperture Table -->"

#: AppEditors/FlatCAMGrbEditor.py:3451
msgid "Deleted aperture with code"
msgstr "Deleted aperture with code"

#: AppEditors/FlatCAMGrbEditor.py:3519
msgid "Dimensions need two float values separated by comma."
msgstr "Dimensions need two float values separated by comma."

#: AppEditors/FlatCAMGrbEditor.py:3528
msgid "Dimensions edited."
msgstr "Dimensions edited."

#: AppEditors/FlatCAMGrbEditor.py:4058
msgid "Loading Gerber into Editor"
msgstr "Loading Gerber into Editor"

#: AppEditors/FlatCAMGrbEditor.py:4186
msgid "Setting up the UI"
msgstr "Setting up the UI"

#: AppEditors/FlatCAMGrbEditor.py:4187
#| msgid "Adding geometry finished. Preparing the GUI"
msgid "Adding geometry finished. Preparing the AppGUI"
msgstr "Adding geometry finished. Preparing the AppGUI"

#: AppEditors/FlatCAMGrbEditor.py:4196
msgid "Finished loading the Gerber object into the editor."
msgstr "Finished loading the Gerber object into the editor."

#: AppEditors/FlatCAMGrbEditor.py:4335
msgid ""
"There are no Aperture definitions in the file. Aborting Gerber creation."
msgstr ""
"There are no Aperture definitions in the file. Aborting Gerber creation."

#: AppEditors/FlatCAMGrbEditor.py:4338 AppObjects/AppObject.py:132
#: AppObjects/FlatCAMGeometry.py:1775 AppParsers/ParseExcellon.py:896
#: AppTools/ToolPcbWizard.py:432 App_Main.py:8619 App_Main.py:8683
#: App_Main.py:8814 App_Main.py:8879 App_Main.py:9531
msgid "An internal error has occurred. See shell.\n"
msgstr "An internal error has occurred. See shell.\n"

#: AppEditors/FlatCAMGrbEditor.py:4345
msgid "Creating Gerber."
msgstr "Creating Gerber."

#: AppEditors/FlatCAMGrbEditor.py:4354
msgid "Done. Gerber editing finished."
msgstr "Done. Gerber editing finished."

#: AppEditors/FlatCAMGrbEditor.py:4372
msgid "Cancelled. No aperture is selected"
msgstr "Cancelled. No aperture is selected"

#: AppEditors/FlatCAMGrbEditor.py:4527 App_Main.py:6171
msgid "Coordinates copied to clipboard."
msgstr "Coordinates copied to clipboard."

#: AppEditors/FlatCAMGrbEditor.py:4970
msgid "Failed. No aperture geometry is selected."
msgstr "Failed. No aperture geometry is selected."

#: AppEditors/FlatCAMGrbEditor.py:4979 AppEditors/FlatCAMGrbEditor.py:5250
msgid "Done. Apertures geometry deleted."
msgstr "Done. Apertures geometry deleted."

#: AppEditors/FlatCAMGrbEditor.py:5122
msgid "No aperture to buffer. Select at least one aperture and try again."
msgstr "No aperture to buffer. Select at least one aperture and try again."

#: AppEditors/FlatCAMGrbEditor.py:5134
msgid "Failed."
msgstr "Failed."

#: AppEditors/FlatCAMGrbEditor.py:5153
msgid "Scale factor value is missing or wrong format. Add it and retry."
msgstr "Scale factor value is missing or wrong format. Add it and retry."

#: AppEditors/FlatCAMGrbEditor.py:5185
msgid "No aperture to scale. Select at least one aperture and try again."
msgstr "No aperture to scale. Select at least one aperture and try again."

#: AppEditors/FlatCAMGrbEditor.py:5201
msgid "Done. Scale Tool completed."
msgstr "Done. Scale Tool completed."

#: AppEditors/FlatCAMGrbEditor.py:5239
msgid "Polygons marked."
msgstr "Polygons marked."

#: AppEditors/FlatCAMGrbEditor.py:5242
msgid "No polygons were marked. None fit within the limits."
msgstr "No polygons were marked. None fit within the limits."

#: AppEditors/FlatCAMGrbEditor.py:5966
msgid "Rotation action was not executed."
msgstr "Rotation action was not executed."

#: AppEditors/FlatCAMGrbEditor.py:6037 App_Main.py:5604 App_Main.py:5652
msgid "Flip action was not executed."
msgstr "Flip action was not executed."

#: AppEditors/FlatCAMGrbEditor.py:6094
msgid "Skew action was not executed."
msgstr "Skew action was not executed."

#: AppEditors/FlatCAMGrbEditor.py:6159
msgid "Scale action was not executed."
msgstr "Scale action was not executed."

#: AppEditors/FlatCAMGrbEditor.py:6202
msgid "Offset action was not executed."
msgstr "Offset action was not executed."

#: AppEditors/FlatCAMGrbEditor.py:6252
msgid "Geometry shape offset Y cancelled"
msgstr "Geometry shape offset Y cancelled"

#: AppEditors/FlatCAMGrbEditor.py:6267
msgid "Geometry shape skew X cancelled"
msgstr "Geometry shape skew X cancelled"

#: AppEditors/FlatCAMGrbEditor.py:6282
msgid "Geometry shape skew Y cancelled"
msgstr "Geometry shape skew Y cancelled"

#: AppEditors/FlatCAMTextEditor.py:74
msgid "Print Preview"
msgstr "Print Preview"

#: AppEditors/FlatCAMTextEditor.py:75
msgid "Open a OS standard Preview Print window."
msgstr "Open a OS standard Preview Print window."

#: AppEditors/FlatCAMTextEditor.py:78
msgid "Print Code"
msgstr "Print Code"

#: AppEditors/FlatCAMTextEditor.py:79
msgid "Open a OS standard Print window."
msgstr "Open a OS standard Print window."

#: AppEditors/FlatCAMTextEditor.py:81
msgid "Find in Code"
msgstr "Find in Code"

#: AppEditors/FlatCAMTextEditor.py:82
msgid "Will search and highlight in yellow the string in the Find box."
msgstr "Will search and highlight in yellow the string in the Find box."

#: AppEditors/FlatCAMTextEditor.py:86
msgid "Find box. Enter here the strings to be searched in the text."
msgstr "Find box. Enter here the strings to be searched in the text."

#: AppEditors/FlatCAMTextEditor.py:88
msgid "Replace With"
msgstr "Replace With"

#: AppEditors/FlatCAMTextEditor.py:89
msgid ""
"Will replace the string from the Find box with the one in the Replace box."
msgstr ""
"Will replace the string from the Find box with the one in the Replace box."

#: AppEditors/FlatCAMTextEditor.py:93
msgid "String to replace the one in the Find box throughout the text."
msgstr "String to replace the one in the Find box throughout the text."

#: AppEditors/FlatCAMTextEditor.py:95 AppGUI/ObjectUI.py:486
#: AppGUI/ObjectUI.py:2349 AppGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:54
#: AppGUI/preferences/gerber/GerberOptPrefGroupUI.py:88
msgid "All"
msgstr "All"

#: AppEditors/FlatCAMTextEditor.py:96
msgid ""
"When checked it will replace all instances in the 'Find' box\n"
"with the text in the 'Replace' box.."
msgstr ""
"When checked it will replace all instances in the 'Find' box\n"
"with the text in the 'Replace' box.."

#: AppEditors/FlatCAMTextEditor.py:99
msgid "Copy All"
msgstr "Copy All"

#: AppEditors/FlatCAMTextEditor.py:100
msgid "Will copy all the text in the Code Editor to the clipboard."
msgstr "Will copy all the text in the Code Editor to the clipboard."

#: AppEditors/FlatCAMTextEditor.py:103
msgid "Open Code"
msgstr "Open Code"

#: AppEditors/FlatCAMTextEditor.py:104
msgid "Will open a text file in the editor."
msgstr "Will open a text file in the editor."

#: AppEditors/FlatCAMTextEditor.py:106
msgid "Save Code"
msgstr "Save Code"

#: AppEditors/FlatCAMTextEditor.py:107
msgid "Will save the text in the editor into a file."
msgstr "Will save the text in the editor into a file."

#: AppEditors/FlatCAMTextEditor.py:109
msgid "Run Code"
msgstr "Run Code"

#: AppEditors/FlatCAMTextEditor.py:110
msgid "Will run the TCL commands found in the text file, one by one."
msgstr "Will run the TCL commands found in the text file, one by one."

#: AppEditors/FlatCAMTextEditor.py:184
msgid "Open file"
msgstr "Open file"

#: AppEditors/FlatCAMTextEditor.py:215 AppEditors/FlatCAMTextEditor.py:220
msgid "Export Code ..."
msgstr "Export Code ..."

#: AppEditors/FlatCAMTextEditor.py:272 AppObjects/FlatCAMCNCJob.py:955
#: AppTools/ToolSolderPaste.py:1530
msgid "No such file or directory"
msgstr "No such file or directory"

#: AppEditors/FlatCAMTextEditor.py:284 AppObjects/FlatCAMCNCJob.py:969
msgid "Saved to"
msgstr "Saved to"

#: AppEditors/FlatCAMTextEditor.py:334
msgid "Code Editor content copied to clipboard ..."
msgstr "Code Editor content copied to clipboard ..."

#: AppGUI/GUIElements.py:2540
#: AppGUI/preferences/tools/ToolsFilmPrefGroupUI.py:180
#: AppTools/ToolDblSided.py:173 AppTools/ToolDblSided.py:388
#: AppTools/ToolFilm.py:202
msgid "Reference"
msgstr "Reference"

#: AppGUI/GUIElements.py:2542
msgid ""
"The reference can be:\n"
"- Absolute -> the reference point is point (0,0)\n"
"- Relative -> the reference point is the mouse position before Jump"
msgstr ""
"The reference can be:\n"
"- Absolute -> the reference point is point (0,0)\n"
"- Relative -> the reference point is the mouse position before Jump"

#: AppGUI/GUIElements.py:2547
msgid "Abs"
msgstr "Abs"

#: AppGUI/GUIElements.py:2548
msgid "Relative"
msgstr "Relative"

#: AppGUI/GUIElements.py:2558
msgid "Location"
msgstr "Location"

#: AppGUI/GUIElements.py:2560
msgid ""
"The Location value is a tuple (x,y).\n"
"If the reference is Absolute then the Jump will be at the position (x,y).\n"
"If the reference is Relative then the Jump will be at the (x,y) distance\n"
"from the current mouse location point."
msgstr ""
"The Location value is a tuple (x,y).\n"
"If the reference is Absolute then the Jump will be at the position (x,y).\n"
"If the reference is Relative then the Jump will be at the (x,y) distance\n"
"from the current mouse location point."

#: AppGUI/GUIElements.py:2600
msgid "Save Log"
msgstr "Save Log"

#: AppGUI/GUIElements.py:2610 App_Main.py:2699 App_Main.py:3060
msgid "Close"
msgstr "Close"

#: AppGUI/GUIElements.py:2619 AppTools/ToolShell.py:278
msgid "Type >help< to get started"
msgstr "Type >help< to get started"

#: AppGUI/GUIElements.py:2990 AppGUI/GUIElements.py:2997
msgid "Idle."
msgstr "Idle."

#: AppGUI/GUIElements.py:3030
msgid "Application started ..."
msgstr "Application started ..."

#: AppGUI/GUIElements.py:3031
msgid "Hello!"
msgstr "Hello!"

#: AppGUI/GUIElements.py:3078 AppGUI/MainGUI.py:201 AppGUI/MainGUI.py:900
#: AppGUI/MainGUI.py:1862
msgid "Run Script ..."
msgstr "Run Script ..."

#: AppGUI/GUIElements.py:3080 AppGUI/MainGUI.py:203
msgid ""
"Will run the opened Tcl Script thus\n"
"enabling the automation of certain\n"
"functions of FlatCAM."
msgstr ""
"Will run the opened Tcl Script thus\n"
"enabling the automation of certain\n"
"functions of FlatCAM."

#: AppGUI/GUIElements.py:3089 AppGUI/MainGUI.py:129
#: AppTools/ToolPcbWizard.py:62 AppTools/ToolPcbWizard.py:69
msgid "Open"
msgstr "Open"

#: AppGUI/GUIElements.py:3093
msgid "Open Project ..."
msgstr "Open Project ..."

#: AppGUI/GUIElements.py:3099 AppGUI/MainGUI.py:140
msgid "Open &Gerber ...\tCtrl+G"
msgstr "Open &Gerber ...\tCtrl+G"

#: AppGUI/GUIElements.py:3104 AppGUI/MainGUI.py:145
msgid "Open &Excellon ...\tCtrl+E"
msgstr "Open &Excellon ...\tCtrl+E"

#: AppGUI/GUIElements.py:3109 AppGUI/MainGUI.py:150
msgid "Open G-&Code ..."
msgstr "Open G-&Code ..."

#: AppGUI/GUIElements.py:3119
msgid "Exit"
msgstr "Exit"

#: AppGUI/MainGUI.py:78 AppGUI/MainGUI.py:80 AppGUI/MainGUI.py:1364
msgid "Toggle Panel"
msgstr "Toggle Panel"

#: AppGUI/MainGUI.py:90
msgid "File"
msgstr "File"

#: AppGUI/MainGUI.py:95
msgid "&New Project ...\tCtrl+N"
msgstr "&New Project ...\tCtrl+N"

#: AppGUI/MainGUI.py:97
msgid "Will create a new, blank project"
msgstr "Will create a new, blank project"

#: AppGUI/MainGUI.py:102
msgid "&New"
msgstr "&New"

#: AppGUI/MainGUI.py:106
msgid "Geometry\tN"
msgstr "Geometry\tN"

#: AppGUI/MainGUI.py:108
msgid "Will create a new, empty Geometry Object."
msgstr "Will create a new, empty Geometry Object."

#: AppGUI/MainGUI.py:111
msgid "Gerber\tB"
msgstr "Gerber\tB"

#: AppGUI/MainGUI.py:113
msgid "Will create a new, empty Gerber Object."
msgstr "Will create a new, empty Gerber Object."

#: AppGUI/MainGUI.py:116
msgid "Excellon\tL"
msgstr "Excellon\tL"

#: AppGUI/MainGUI.py:118
msgid "Will create a new, empty Excellon Object."
msgstr "Will create a new, empty Excellon Object."

#: AppGUI/MainGUI.py:123
msgid "Document\tD"
msgstr "Document\tD"

#: AppGUI/MainGUI.py:125
msgid "Will create a new, empty Document Object."
msgstr "Will create a new, empty Document Object."

#: AppGUI/MainGUI.py:134
msgid "Open &Project ..."
msgstr "Open &Project ..."

#: AppGUI/MainGUI.py:157
msgid "Open Config ..."
msgstr "Open Config ..."

#: AppGUI/MainGUI.py:162
msgid "Recent projects"
msgstr "Recent projects"

#: AppGUI/MainGUI.py:164
msgid "Recent files"
msgstr "Recent files"

#: AppGUI/MainGUI.py:167 AppGUI/MainGUI.py:755 AppGUI/MainGUI.py:1337
msgid "Save"
msgstr "Save"

#: AppGUI/MainGUI.py:171
msgid "&Save Project ...\tCtrl+S"
msgstr "&Save Project ...\tCtrl+S"

#: AppGUI/MainGUI.py:176
msgid "Save Project &As ...\tCtrl+Shift+S"
msgstr "Save Project &As ...\tCtrl+Shift+S"

#: AppGUI/MainGUI.py:191
msgid "Scripting"
msgstr "Scripting"

#: AppGUI/MainGUI.py:195 AppGUI/MainGUI.py:896 AppGUI/MainGUI.py:1858
msgid "New Script ..."
msgstr "New Script ..."

#: AppGUI/MainGUI.py:197 AppGUI/MainGUI.py:898 AppGUI/MainGUI.py:1860
msgid "Open Script ..."
msgstr "Open Script ..."

#: AppGUI/MainGUI.py:199
msgid "Open Example ..."
msgstr "Open Example ..."

#: AppGUI/MainGUI.py:218
msgid "Import"
msgstr "Import"

#: AppGUI/MainGUI.py:220
msgid "&SVG as Geometry Object ..."
msgstr "&SVG as Geometry Object ..."

#: AppGUI/MainGUI.py:223
msgid "&SVG as Gerber Object ..."
msgstr "&SVG as Gerber Object ..."

#: AppGUI/MainGUI.py:228
msgid "&DXF as Geometry Object ..."
msgstr "&DXF as Geometry Object ..."

#: AppGUI/MainGUI.py:231
msgid "&DXF as Gerber Object ..."
msgstr "&DXF as Gerber Object ..."

#: AppGUI/MainGUI.py:235
msgid "HPGL2 as Geometry Object ..."
msgstr "HPGL2 as Geometry Object ..."

#: AppGUI/MainGUI.py:241
msgid "Export"
msgstr "Export"

#: AppGUI/MainGUI.py:245
msgid "Export &SVG ..."
msgstr "Export &SVG ..."

#: AppGUI/MainGUI.py:249
msgid "Export DXF ..."
msgstr "Export DXF ..."

#: AppGUI/MainGUI.py:255
msgid "Export &PNG ..."
msgstr "Export &PNG ..."

#: AppGUI/MainGUI.py:257
msgid ""
"Will export an image in PNG format,\n"
"the saved image will contain the visual \n"
"information currently in FlatCAM Plot Area."
msgstr ""
"Will export an image in PNG format,\n"
"the saved image will contain the visual \n"
"information currently in FlatCAM Plot Area."

#: AppGUI/MainGUI.py:266
msgid "Export &Excellon ..."
msgstr "Export &Excellon ..."

#: AppGUI/MainGUI.py:268
msgid ""
"Will export an Excellon Object as Excellon file,\n"
"the coordinates format, the file units and zeros\n"
"are set in Preferences -> Excellon Export."
msgstr ""
"Will export an Excellon Object as Excellon file,\n"
"the coordinates format, the file units and zeros\n"
"are set in Preferences -> Excellon Export."

#: AppGUI/MainGUI.py:275
msgid "Export &Gerber ..."
msgstr "Export &Gerber ..."

#: AppGUI/MainGUI.py:277
msgid ""
"Will export an Gerber Object as Gerber file,\n"
"the coordinates format, the file units and zeros\n"
"are set in Preferences -> Gerber Export."
msgstr ""
"Will export an Gerber Object as Gerber file,\n"
"the coordinates format, the file units and zeros\n"
"are set in Preferences -> Gerber Export."

#: AppGUI/MainGUI.py:287
msgid "Backup"
msgstr "Backup"

#: AppGUI/MainGUI.py:292
msgid "Import Preferences from file ..."
msgstr "Import Preferences from file ..."

#: AppGUI/MainGUI.py:298
msgid "Export Preferences to file ..."
msgstr "Export Preferences to file ..."

#: AppGUI/MainGUI.py:306 AppGUI/preferences/PreferencesUIManager.py:1176
msgid "Save Preferences"
msgstr "Save Preferences"

#: AppGUI/MainGUI.py:312 AppGUI/MainGUI.py:3989
msgid "Print (PDF)"
msgstr "Print (PDF)"

#: AppGUI/MainGUI.py:320
msgid "E&xit"
msgstr "E&xit"

#: AppGUI/MainGUI.py:328 AppGUI/MainGUI.py:749 AppGUI/MainGUI.py:1487
msgid "Edit"
msgstr "Edit"

#: AppGUI/MainGUI.py:332
msgid "Edit Object\tE"
msgstr "Edit Object\tE"

#: AppGUI/MainGUI.py:334
msgid "Close Editor\tCtrl+S"
msgstr "Close Editor\tCtrl+S"

#: AppGUI/MainGUI.py:343
msgid "Conversion"
msgstr "Conversion"

#: AppGUI/MainGUI.py:345
msgid "&Join Geo/Gerber/Exc -> Geo"
msgstr "&Join Geo/Gerber/Exc -> Geo"

#: AppGUI/MainGUI.py:347
msgid ""
"Merge a selection of objects, which can be of type:\n"
"- Gerber\n"
"- Excellon\n"
"- Geometry\n"
"into a new combo Geometry object."
msgstr ""
"Merge a selection of objects, which can be of type:\n"
"- Gerber\n"
"- Excellon\n"
"- Geometry\n"
"into a new combo Geometry object."

#: AppGUI/MainGUI.py:354
msgid "Join Excellon(s) -> Excellon"
msgstr "Join Excellon(s) -> Excellon"

#: AppGUI/MainGUI.py:356
msgid "Merge a selection of Excellon objects into a new combo Excellon object."
msgstr ""
"Merge a selection of Excellon objects into a new combo Excellon object."

#: AppGUI/MainGUI.py:359
msgid "Join Gerber(s) -> Gerber"
msgstr "Join Gerber(s) -> Gerber"

#: AppGUI/MainGUI.py:361
msgid "Merge a selection of Gerber objects into a new combo Gerber object."
msgstr "Merge a selection of Gerber objects into a new combo Gerber object."

#: AppGUI/MainGUI.py:366
msgid "Convert Single to MultiGeo"
msgstr "Convert Single to MultiGeo"

#: AppGUI/MainGUI.py:368
msgid ""
"Will convert a Geometry object from single_geometry type\n"
"to a multi_geometry type."
msgstr ""
"Will convert a Geometry object from single_geometry type\n"
"to a multi_geometry type."

#: AppGUI/MainGUI.py:372
msgid "Convert Multi to SingleGeo"
msgstr "Convert Multi to SingleGeo"

#: AppGUI/MainGUI.py:374
msgid ""
"Will convert a Geometry object from multi_geometry type\n"
"to a single_geometry type."
msgstr ""
"Will convert a Geometry object from multi_geometry type\n"
"to a single_geometry type."

#: AppGUI/MainGUI.py:381
msgid "Convert Any to Geo"
msgstr "Convert Any to Geo"

#: AppGUI/MainGUI.py:384
msgid "Convert Any to Gerber"
msgstr "Convert Any to Gerber"

#: AppGUI/MainGUI.py:390
msgid "&Copy\tCtrl+C"
msgstr "&Copy\tCtrl+C"

#: AppGUI/MainGUI.py:395
msgid "&Delete\tDEL"
msgstr "&Delete\tDEL"

#: AppGUI/MainGUI.py:400
msgid "Se&t Origin\tO"
msgstr "Se&t Origin\tO"

#: AppGUI/MainGUI.py:402
msgid "Move to Origin\tShift+O"
msgstr "Move to Origin\tShift+O"

#: AppGUI/MainGUI.py:405
msgid "Jump to Location\tJ"
msgstr "Jump to Location\tJ"

#: AppGUI/MainGUI.py:407
msgid "Locate in Object\tShift+J"
msgstr "Locate in Object\tShift+J"

#: AppGUI/MainGUI.py:412
msgid "Toggle Units\tQ"
msgstr "Toggle Units\tQ"

#: AppGUI/MainGUI.py:414
msgid "&Select All\tCtrl+A"
msgstr "&Select All\tCtrl+A"

#: AppGUI/MainGUI.py:419
msgid "&Preferences\tShift+P"
msgstr "&Preferences\tShift+P"

#: AppGUI/MainGUI.py:425 AppTools/ToolProperties.py:155
msgid "Options"
msgstr "Options"

#: AppGUI/MainGUI.py:427
msgid "&Rotate Selection\tShift+(R)"
msgstr "&Rotate Selection\tShift+(R)"

#: AppGUI/MainGUI.py:432
msgid "&Skew on X axis\tShift+X"
msgstr "&Skew on X axis\tShift+X"

#: AppGUI/MainGUI.py:434
msgid "S&kew on Y axis\tShift+Y"
msgstr "S&kew on Y axis\tShift+Y"

#: AppGUI/MainGUI.py:439
msgid "Flip on &X axis\tX"
msgstr "Flip on &X axis\tX"

#: AppGUI/MainGUI.py:441
msgid "Flip on &Y axis\tY"
msgstr "Flip on &Y axis\tY"

#: AppGUI/MainGUI.py:446
msgid "View source\tAlt+S"
msgstr "View source\tAlt+S"

#: AppGUI/MainGUI.py:448
msgid "Tools DataBase\tCtrl+D"
msgstr "Tools DataBase\tCtrl+D"

#: AppGUI/MainGUI.py:455 AppGUI/MainGUI.py:1384
msgid "View"
msgstr "View"

#: AppGUI/MainGUI.py:457
msgid "Enable all plots\tAlt+1"
msgstr "Enable all plots\tAlt+1"

#: AppGUI/MainGUI.py:459
msgid "Disable all plots\tAlt+2"
msgstr "Disable all plots\tAlt+2"

#: AppGUI/MainGUI.py:461
msgid "Disable non-selected\tAlt+3"
msgstr "Disable non-selected\tAlt+3"

#: AppGUI/MainGUI.py:465
msgid "&Zoom Fit\tV"
msgstr "&Zoom Fit\tV"

#: AppGUI/MainGUI.py:467
msgid "&Zoom In\t="
msgstr "&Zoom In\t="

#: AppGUI/MainGUI.py:469
msgid "&Zoom Out\t-"
msgstr "&Zoom Out\t-"

#: AppGUI/MainGUI.py:474
msgid "Redraw All\tF5"
msgstr "Redraw All\tF5"

#: AppGUI/MainGUI.py:478
msgid "Toggle Code Editor\tShift+E"
msgstr "Toggle Code Editor\tShift+E"

#: AppGUI/MainGUI.py:481
msgid "&Toggle FullScreen\tAlt+F10"
msgstr "&Toggle FullScreen\tAlt+F10"

#: AppGUI/MainGUI.py:483
msgid "&Toggle Plot Area\tCtrl+F10"
msgstr "&Toggle Plot Area\tCtrl+F10"

#: AppGUI/MainGUI.py:485
msgid "&Toggle Project/Sel/Tool\t`"
msgstr "&Toggle Project/Sel/Tool\t`"

#: AppGUI/MainGUI.py:489
msgid "&Toggle Grid Snap\tG"
msgstr "&Toggle Grid Snap\tG"

#: AppGUI/MainGUI.py:491
msgid "&Toggle Grid Lines\tAlt+G"
msgstr "&Toggle Grid Lines\tAlt+G"

#: AppGUI/MainGUI.py:493
msgid "&Toggle Axis\tShift+G"
msgstr "&Toggle Axis\tShift+G"

#: AppGUI/MainGUI.py:495
msgid "Toggle Workspace\tShift+W"
msgstr "Toggle Workspace\tShift+W"

#: AppGUI/MainGUI.py:497
#| msgid "Toggle Units"
msgid "Toggle HUD\tAlt+M"
msgstr "Toggle HUD\tAlt+M"

#: AppGUI/MainGUI.py:502
msgid "Objects"
msgstr "Objects"

#: AppGUI/MainGUI.py:505 AppGUI/MainGUI.py:3987
#: AppObjects/ObjectCollection.py:1120 AppObjects/ObjectCollection.py:1167
msgid "Select All"
msgstr "Select All"

#: AppGUI/MainGUI.py:507 AppObjects/ObjectCollection.py:1124
#: AppObjects/ObjectCollection.py:1171
msgid "Deselect All"
msgstr "Deselect All"

#: AppGUI/MainGUI.py:516
msgid "&Command Line\tS"
msgstr "&Command Line\tS"

#: AppGUI/MainGUI.py:521
msgid "Help"
msgstr "Help"

#: AppGUI/MainGUI.py:523
msgid "Online Help\tF1"
msgstr "Online Help\tF1"

#: AppGUI/MainGUI.py:526 Bookmark.py:293
msgid "Bookmarks"
msgstr "Bookmarks"

#: AppGUI/MainGUI.py:529 App_Main.py:3031 App_Main.py:3040
msgid "Bookmarks Manager"
msgstr "Bookmarks Manager"

#: AppGUI/MainGUI.py:533
msgid "Report a bug"
msgstr "Report a bug"

#: AppGUI/MainGUI.py:536
msgid "Excellon Specification"
msgstr "Excellon Specification"

#: AppGUI/MainGUI.py:538
msgid "Gerber Specification"
msgstr "Gerber Specification"

#: AppGUI/MainGUI.py:543
msgid "Shortcuts List\tF3"
msgstr "Shortcuts List\tF3"

#: AppGUI/MainGUI.py:545
msgid "YouTube Channel\tF4"
msgstr "YouTube Channel\tF4"

#: AppGUI/MainGUI.py:547 App_Main.py:2666
msgid "About FlatCAM"
msgstr "About FlatCAM"

#: AppGUI/MainGUI.py:556
msgid "Add Circle\tO"
msgstr "Add Circle\tO"

#: AppGUI/MainGUI.py:559
msgid "Add Arc\tA"
msgstr "Add Arc\tA"

#: AppGUI/MainGUI.py:562
msgid "Add Rectangle\tR"
msgstr "Add Rectangle\tR"

#: AppGUI/MainGUI.py:565
msgid "Add Polygon\tN"
msgstr "Add Polygon\tN"

#: AppGUI/MainGUI.py:568
msgid "Add Path\tP"
msgstr "Add Path\tP"

#: AppGUI/MainGUI.py:571
msgid "Add Text\tT"
msgstr "Add Text\tT"

#: AppGUI/MainGUI.py:574
msgid "Polygon Union\tU"
msgstr "Polygon Union\tU"

#: AppGUI/MainGUI.py:576
msgid "Polygon Intersection\tE"
msgstr "Polygon Intersection\tE"

#: AppGUI/MainGUI.py:578
msgid "Polygon Subtraction\tS"
msgstr "Polygon Subtraction\tS"

#: AppGUI/MainGUI.py:582
msgid "Cut Path\tX"
msgstr "Cut Path\tX"

#: AppGUI/MainGUI.py:586
msgid "Copy Geom\tC"
msgstr "Copy Geom\tC"

#: AppGUI/MainGUI.py:588
msgid "Delete Shape\tDEL"
msgstr "Delete Shape\tDEL"

#: AppGUI/MainGUI.py:592 AppGUI/MainGUI.py:679
msgid "Move\tM"
msgstr "Move\tM"

#: AppGUI/MainGUI.py:594
msgid "Buffer Tool\tB"
msgstr "Buffer Tool\tB"

#: AppGUI/MainGUI.py:597
msgid "Paint Tool\tI"
msgstr "Paint Tool\tI"

#: AppGUI/MainGUI.py:600
msgid "Transform Tool\tAlt+R"
msgstr "Transform Tool\tAlt+R"

#: AppGUI/MainGUI.py:604
msgid "Toggle Corner Snap\tK"
msgstr "Toggle Corner Snap\tK"

#: AppGUI/MainGUI.py:610
msgid ">Excellon Editor<"
msgstr ">Excellon Editor<"

#: AppGUI/MainGUI.py:614
msgid "Add Drill Array\tA"
msgstr "Add Drill Array\tA"

#: AppGUI/MainGUI.py:616
msgid "Add Drill\tD"
msgstr "Add Drill\tD"

#: AppGUI/MainGUI.py:620
msgid "Add Slot Array\tQ"
msgstr "Add Slot Array\tQ"

#: AppGUI/MainGUI.py:622
msgid "Add Slot\tW"
msgstr "Add Slot\tW"

#: AppGUI/MainGUI.py:626
msgid "Resize Drill(S)\tR"
msgstr "Resize Drill(S)\tR"

#: AppGUI/MainGUI.py:629 AppGUI/MainGUI.py:673
msgid "Copy\tC"
msgstr "Copy\tC"

#: AppGUI/MainGUI.py:631 AppGUI/MainGUI.py:675
msgid "Delete\tDEL"
msgstr "Delete\tDEL"

#: AppGUI/MainGUI.py:636
msgid "Move Drill(s)\tM"
msgstr "Move Drill(s)\tM"

#: AppGUI/MainGUI.py:641
msgid ">Gerber Editor<"
msgstr ">Gerber Editor<"

#: AppGUI/MainGUI.py:645
msgid "Add Pad\tP"
msgstr "Add Pad\tP"

#: AppGUI/MainGUI.py:647
msgid "Add Pad Array\tA"
msgstr "Add Pad Array\tA"

#: AppGUI/MainGUI.py:649
msgid "Add Track\tT"
msgstr "Add Track\tT"

#: AppGUI/MainGUI.py:651
msgid "Add Region\tN"
msgstr "Add Region\tN"

#: AppGUI/MainGUI.py:655
msgid "Poligonize\tAlt+N"
msgstr "Poligonize\tAlt+N"

#: AppGUI/MainGUI.py:657
msgid "Add SemiDisc\tE"
msgstr "Add SemiDisc\tE"

#: AppGUI/MainGUI.py:659
msgid "Add Disc\tD"
msgstr "Add Disc\tD"

#: AppGUI/MainGUI.py:661
msgid "Buffer\tB"
msgstr "Buffer\tB"

#: AppGUI/MainGUI.py:663
msgid "Scale\tS"
msgstr "Scale\tS"

#: AppGUI/MainGUI.py:665
msgid "Mark Area\tAlt+A"
msgstr "Mark Area\tAlt+A"

#: AppGUI/MainGUI.py:667
msgid "Eraser\tCtrl+E"
msgstr "Eraser\tCtrl+E"

#: AppGUI/MainGUI.py:669
msgid "Transform\tAlt+R"
msgstr "Transform\tAlt+R"

#: AppGUI/MainGUI.py:696
msgid "Enable Plot"
msgstr "Enable Plot"

#: AppGUI/MainGUI.py:698
msgid "Disable Plot"
msgstr "Disable Plot"

#: AppGUI/MainGUI.py:702
msgid "Set Color"
msgstr "Set Color"

#: AppGUI/MainGUI.py:705 App_Main.py:9798
msgid "Red"
msgstr "Red"

#: AppGUI/MainGUI.py:708 App_Main.py:9800
msgid "Blue"
msgstr "Blue"

#: AppGUI/MainGUI.py:711 App_Main.py:9803
msgid "Yellow"
msgstr "Yellow"

#: AppGUI/MainGUI.py:714 App_Main.py:9805
msgid "Green"
msgstr "Green"

#: AppGUI/MainGUI.py:717 App_Main.py:9807
msgid "Purple"
msgstr "Purple"

#: AppGUI/MainGUI.py:720 App_Main.py:9809
msgid "Brown"
msgstr "Brown"

#: AppGUI/MainGUI.py:723 App_Main.py:9811 App_Main.py:9867
msgid "White"
msgstr "White"

#: AppGUI/MainGUI.py:726 App_Main.py:9813
msgid "Black"
msgstr "Black"

#: AppGUI/MainGUI.py:731 App_Main.py:9816
msgid "Custom"
msgstr "Custom"

#: AppGUI/MainGUI.py:736 App_Main.py:9850
msgid "Opacity"
msgstr "Opacity"

#: AppGUI/MainGUI.py:739 App_Main.py:9826
msgid "Default"
msgstr "Default"

#: AppGUI/MainGUI.py:744
msgid "Generate CNC"
msgstr "Generate CNC"

#: AppGUI/MainGUI.py:746
msgid "View Source"
msgstr "View Source"

#: AppGUI/MainGUI.py:751 AppGUI/MainGUI.py:856 AppGUI/MainGUI.py:1067
#: AppGUI/MainGUI.py:1483 AppGUI/MainGUI.py:1821 AppGUI/MainGUI.py:2028
#: AppGUI/MainGUI.py:4397 AppGUI/ObjectUI.py:1719
#: AppObjects/FlatCAMGeometry.py:553 AppTools/ToolPanelize.py:551
#: AppTools/ToolPanelize.py:578 AppTools/ToolPanelize.py:671
#: AppTools/ToolPanelize.py:700 AppTools/ToolPanelize.py:762
msgid "Copy"
msgstr "Copy"

#: AppGUI/MainGUI.py:759 AppGUI/MainGUI.py:1496 AppTools/ToolProperties.py:31
msgid "Properties"
msgstr "Properties"

#: AppGUI/MainGUI.py:788
msgid "File Toolbar"
msgstr "File Toolbar"

#: AppGUI/MainGUI.py:792
msgid "Edit Toolbar"
msgstr "Edit Toolbar"

#: AppGUI/MainGUI.py:796
msgid "View Toolbar"
msgstr "View Toolbar"

#: AppGUI/MainGUI.py:800
msgid "Shell Toolbar"
msgstr "Shell Toolbar"

#: AppGUI/MainGUI.py:804
msgid "Tools Toolbar"
msgstr "Tools Toolbar"

#: AppGUI/MainGUI.py:808
msgid "Excellon Editor Toolbar"
msgstr "Excellon Editor Toolbar"

#: AppGUI/MainGUI.py:814
msgid "Geometry Editor Toolbar"
msgstr "Geometry Editor Toolbar"

#: AppGUI/MainGUI.py:818
msgid "Gerber Editor Toolbar"
msgstr "Gerber Editor Toolbar"

#: AppGUI/MainGUI.py:822
msgid "Grid Toolbar"
msgstr "Grid Toolbar"

#: AppGUI/MainGUI.py:836 AppGUI/MainGUI.py:1800 App_Main.py:6763
#: App_Main.py:6767
msgid "Open Gerber"
msgstr "Open Gerber"

#: AppGUI/MainGUI.py:838 AppGUI/MainGUI.py:1802 App_Main.py:6801
#: App_Main.py:6805
msgid "Open Excellon"
msgstr "Open Excellon"

#: AppGUI/MainGUI.py:841 AppGUI/MainGUI.py:1805
msgid "Open project"
msgstr "Open project"

#: AppGUI/MainGUI.py:843 AppGUI/MainGUI.py:1807
msgid "Save project"
msgstr "Save project"

#: AppGUI/MainGUI.py:851 AppGUI/MainGUI.py:1816
msgid "Save Object and close the Editor"
msgstr "Save Object and close the Editor"

#: AppGUI/MainGUI.py:858 AppGUI/MainGUI.py:1823
msgid "&Delete"
msgstr "&Delete"

#: AppGUI/MainGUI.py:861 AppGUI/MainGUI.py:1826 AppGUI/MainGUI.py:3988
#: AppGUI/MainGUI.py:4194 AppTools/ToolDistance.py:35
#: AppTools/ToolDistance.py:197
msgid "Distance Tool"
msgstr "Distance Tool"

#: AppGUI/MainGUI.py:863 AppGUI/MainGUI.py:1828
msgid "Distance Min Tool"
msgstr "Distance Min Tool"

#: AppGUI/MainGUI.py:865 AppGUI/MainGUI.py:1830 AppGUI/MainGUI.py:3981
msgid "Set Origin"
msgstr "Set Origin"

#: AppGUI/MainGUI.py:867 AppGUI/MainGUI.py:1832
msgid "Move to Origin"
msgstr "Move to Origin"

#: AppGUI/MainGUI.py:870 AppGUI/MainGUI.py:1834
msgid "Jump to Location"
msgstr "Jump to Location"

#: AppGUI/MainGUI.py:872 AppGUI/MainGUI.py:1836 AppGUI/MainGUI.py:3993
msgid "Locate in Object"
msgstr "Locate in Object"

#: AppGUI/MainGUI.py:878 AppGUI/MainGUI.py:1842
msgid "&Replot"
msgstr "&Replot"

#: AppGUI/MainGUI.py:880 AppGUI/MainGUI.py:1844
msgid "&Clear plot"
msgstr "&Clear plot"

#: AppGUI/MainGUI.py:882 AppGUI/MainGUI.py:1846 AppGUI/MainGUI.py:3984
msgid "Zoom In"
msgstr "Zoom In"

#: AppGUI/MainGUI.py:884 AppGUI/MainGUI.py:1848 AppGUI/MainGUI.py:3984
msgid "Zoom Out"
msgstr "Zoom Out"

#: AppGUI/MainGUI.py:886 AppGUI/MainGUI.py:1386 AppGUI/MainGUI.py:1850
#: AppGUI/MainGUI.py:3983
msgid "Zoom Fit"
msgstr "Zoom Fit"

#: AppGUI/MainGUI.py:894 AppGUI/MainGUI.py:1856
msgid "&Command Line"
msgstr "&Command Line"

#: AppGUI/MainGUI.py:906 AppGUI/MainGUI.py:1868
msgid "2Sided Tool"
msgstr "2Sided Tool"

#: AppGUI/MainGUI.py:908 AppGUI/MainGUI.py:1870 AppGUI/MainGUI.py:3999
msgid "Align Objects Tool"
msgstr "Align Objects Tool"

#: AppGUI/MainGUI.py:910 AppGUI/MainGUI.py:1872 AppGUI/MainGUI.py:4000
#: AppTools/ToolExtractDrills.py:393
msgid "Extract Drills Tool"
msgstr "Extract Drills Tool"

#: AppGUI/MainGUI.py:913 AppGUI/ObjectUI.py:596 AppTools/ToolCutOut.py:440
msgid "Cutout Tool"
msgstr "Cutout Tool"

#: AppGUI/MainGUI.py:915 AppGUI/MainGUI.py:1877 AppGUI/ObjectUI.py:574
#: AppGUI/ObjectUI.py:2287 AppTools/ToolNCC.py:974
msgid "NCC Tool"
msgstr "NCC Tool"

#: AppGUI/MainGUI.py:921 AppGUI/MainGUI.py:1883
msgid "Panel Tool"
msgstr "Panel Tool"

#: AppGUI/MainGUI.py:923 AppGUI/MainGUI.py:1885 AppTools/ToolFilm.py:569
msgid "Film Tool"
msgstr "Film Tool"

#: AppGUI/MainGUI.py:925 AppGUI/MainGUI.py:1887 AppTools/ToolSolderPaste.py:553
msgid "SolderPaste Tool"
msgstr "SolderPaste Tool"

#: AppGUI/MainGUI.py:927 AppGUI/MainGUI.py:1889 AppTools/ToolSub.py:35
msgid "Subtract Tool"
msgstr "Subtract Tool"

#: AppGUI/MainGUI.py:929 AppGUI/MainGUI.py:1891 AppTools/ToolRulesCheck.py:616
msgid "Rules Tool"
msgstr "Rules Tool"

#: AppGUI/MainGUI.py:931 AppGUI/MainGUI.py:1893 AppGUI/MainGUI.py:4002
#: AppTools/ToolOptimal.py:33 AppTools/ToolOptimal.py:307
msgid "Optimal Tool"
msgstr "Optimal Tool"

#: AppGUI/MainGUI.py:936 AppGUI/MainGUI.py:1898 AppGUI/MainGUI.py:3999
msgid "Calculators Tool"
msgstr "Calculators Tool"

#: AppGUI/MainGUI.py:940 AppGUI/MainGUI.py:1902 AppGUI/MainGUI.py:4003
#: AppTools/ToolQRCode.py:43 AppTools/ToolQRCode.py:382
msgid "QRCode Tool"
msgstr "QRCode Tool"

#: AppGUI/MainGUI.py:942 AppGUI/MainGUI.py:1904
#: AppTools/ToolCopperThieving.py:39 AppTools/ToolCopperThieving.py:568
msgid "Copper Thieving Tool"
msgstr "Copper Thieving Tool"

#: AppGUI/MainGUI.py:945 AppGUI/MainGUI.py:1907 AppGUI/MainGUI.py:4000
#: AppTools/ToolFiducials.py:33 AppTools/ToolFiducials.py:396
msgid "Fiducials Tool"
msgstr "Fiducials Tool"

#: AppGUI/MainGUI.py:947 AppGUI/MainGUI.py:1909 AppTools/ToolCalibration.py:37
#: AppTools/ToolCalibration.py:759
msgid "Calibration Tool"
msgstr "Calibration Tool"

#: AppGUI/MainGUI.py:949 AppGUI/MainGUI.py:1911 AppGUI/MainGUI.py:4000
msgid "Punch Gerber Tool"
msgstr "Punch Gerber Tool"

#: AppGUI/MainGUI.py:951 AppGUI/MainGUI.py:1913 AppTools/ToolInvertGerber.py:31
msgid "Invert Gerber Tool"
msgstr "Invert Gerber Tool"

#: AppGUI/MainGUI.py:953 AppGUI/MainGUI.py:1915 AppGUI/MainGUI.py:4002
#: AppTools/ToolCorners.py:31
#| msgid "Invert Gerber Tool"
msgid "Corner Markers Tool"
msgstr "Corner Markers Tool"

#: AppGUI/MainGUI.py:959 AppGUI/MainGUI.py:985 AppGUI/MainGUI.py:1037
#: AppGUI/MainGUI.py:1921 AppGUI/MainGUI.py:1999
msgid "Select"
msgstr "Select"

#: AppGUI/MainGUI.py:961 AppGUI/MainGUI.py:1923
msgid "Add Drill Hole"
msgstr "Add Drill Hole"

#: AppGUI/MainGUI.py:963 AppGUI/MainGUI.py:1925
msgid "Add Drill Hole Array"
msgstr "Add Drill Hole Array"

#: AppGUI/MainGUI.py:965 AppGUI/MainGUI.py:1474 AppGUI/MainGUI.py:1929
#: AppGUI/MainGUI.py:4279
msgid "Add Slot"
msgstr "Add Slot"

#: AppGUI/MainGUI.py:967 AppGUI/MainGUI.py:1476 AppGUI/MainGUI.py:1931
#: AppGUI/MainGUI.py:4278
msgid "Add Slot Array"
msgstr "Add Slot Array"

#: AppGUI/MainGUI.py:969 AppGUI/MainGUI.py:1479 AppGUI/MainGUI.py:1927
msgid "Resize Drill"
msgstr "Resize Drill"

#: AppGUI/MainGUI.py:973 AppGUI/MainGUI.py:1935
msgid "Copy Drill"
msgstr "Copy Drill"

#: AppGUI/MainGUI.py:975 AppGUI/MainGUI.py:1937
msgid "Delete Drill"
msgstr "Delete Drill"

#: AppGUI/MainGUI.py:979 AppGUI/MainGUI.py:1941
msgid "Move Drill"
msgstr "Move Drill"

#: AppGUI/MainGUI.py:987 AppGUI/MainGUI.py:1949
msgid "Add Circle"
msgstr "Add Circle"

#: AppGUI/MainGUI.py:989 AppGUI/MainGUI.py:1951
msgid "Add Arc"
msgstr "Add Arc"

#: AppGUI/MainGUI.py:991 AppGUI/MainGUI.py:1953
msgid "Add Rectangle"
msgstr "Add Rectangle"

#: AppGUI/MainGUI.py:995 AppGUI/MainGUI.py:1957
msgid "Add Path"
msgstr "Add Path"

#: AppGUI/MainGUI.py:997 AppGUI/MainGUI.py:1959
msgid "Add Polygon"
msgstr "Add Polygon"

#: AppGUI/MainGUI.py:1000 AppGUI/MainGUI.py:1962
msgid "Add Text"
msgstr "Add Text"

#: AppGUI/MainGUI.py:1002 AppGUI/MainGUI.py:1964
msgid "Add Buffer"
msgstr "Add Buffer"

#: AppGUI/MainGUI.py:1004 AppGUI/MainGUI.py:1966
msgid "Paint Shape"
msgstr "Paint Shape"

#: AppGUI/MainGUI.py:1006 AppGUI/MainGUI.py:1063 AppGUI/MainGUI.py:1415
#: AppGUI/MainGUI.py:1460 AppGUI/MainGUI.py:1968 AppGUI/MainGUI.py:2024
msgid "Eraser"
msgstr "Eraser"

#: AppGUI/MainGUI.py:1010 AppGUI/MainGUI.py:1972
msgid "Polygon Union"
msgstr "Polygon Union"

#: AppGUI/MainGUI.py:1012 AppGUI/MainGUI.py:1974
msgid "Polygon Explode"
msgstr "Polygon Explode"

#: AppGUI/MainGUI.py:1015 AppGUI/MainGUI.py:1977
msgid "Polygon Intersection"
msgstr "Polygon Intersection"

#: AppGUI/MainGUI.py:1017 AppGUI/MainGUI.py:1979
msgid "Polygon Subtraction"
msgstr "Polygon Subtraction"

#: AppGUI/MainGUI.py:1021 AppGUI/MainGUI.py:1983
msgid "Cut Path"
msgstr "Cut Path"

#: AppGUI/MainGUI.py:1023
msgid "Copy Shape(s)"
msgstr "Copy Shape(s)"

#: AppGUI/MainGUI.py:1026
msgid "Delete Shape '-'"
msgstr "Delete Shape '-'"

#: AppGUI/MainGUI.py:1028 AppGUI/MainGUI.py:1071 AppGUI/MainGUI.py:1427
#: AppGUI/MainGUI.py:1464 AppGUI/MainGUI.py:1989 AppGUI/MainGUI.py:2032
#: AppGUI/ObjectUI.py:109
msgid "Transformations"
msgstr "Transformations"

#: AppGUI/MainGUI.py:1031
msgid "Move Objects "
msgstr "Move Objects "

#: AppGUI/MainGUI.py:1039 AppGUI/MainGUI.py:2001 AppGUI/MainGUI.py:4398
msgid "Add Pad"
msgstr "Add Pad"

#: AppGUI/MainGUI.py:1043 AppGUI/MainGUI.py:2005 AppGUI/MainGUI.py:4399
msgid "Add Track"
msgstr "Add Track"

#: AppGUI/MainGUI.py:1045 AppGUI/MainGUI.py:2007 AppGUI/MainGUI.py:4398
msgid "Add Region"
msgstr "Add Region"

#: AppGUI/MainGUI.py:1047 AppGUI/MainGUI.py:1446 AppGUI/MainGUI.py:2009
msgid "Poligonize"
msgstr "Poligonize"

#: AppGUI/MainGUI.py:1050 AppGUI/MainGUI.py:1448 AppGUI/MainGUI.py:2012
msgid "SemiDisc"
msgstr "SemiDisc"

#: AppGUI/MainGUI.py:1052 AppGUI/MainGUI.py:1450 AppGUI/MainGUI.py:2014
msgid "Disc"
msgstr "Disc"

#: AppGUI/MainGUI.py:1060 AppGUI/MainGUI.py:1458 AppGUI/MainGUI.py:2022
msgid "Mark Area"
msgstr "Mark Area"

#: AppGUI/MainGUI.py:1074 AppGUI/MainGUI.py:1431 AppGUI/MainGUI.py:1494
#: AppGUI/MainGUI.py:2035 AppGUI/MainGUI.py:4398 AppTools/ToolMove.py:27
msgid "Move"
msgstr "Move"

#: AppGUI/MainGUI.py:1082
msgid "Snap to grid"
msgstr "Snap to grid"

#: AppGUI/MainGUI.py:1085
msgid "Grid X snapping distance"
msgstr "Grid X snapping distance"

#: AppGUI/MainGUI.py:1090
msgid "Grid Y snapping distance"
msgstr "Grid Y snapping distance"

#: AppGUI/MainGUI.py:1096
msgid ""
"When active, value on Grid_X\n"
"is copied to the Grid_Y value."
msgstr ""
"When active, value on Grid_X\n"
"is copied to the Grid_Y value."

#: AppGUI/MainGUI.py:1103
msgid "Snap to corner"
msgstr "Snap to corner"

#: AppGUI/MainGUI.py:1107 AppGUI/preferences/general/GeneralAPPSetGroupUI.py:78
msgid "Max. magnet distance"
msgstr "Max. magnet distance"

#: AppGUI/MainGUI.py:1132 AppGUI/MainGUI.py:1377 App_Main.py:7793
msgid "Project"
msgstr "Project"

#: AppGUI/MainGUI.py:1147
msgid "Selected"
msgstr "Selected"

#: AppGUI/MainGUI.py:1175 AppGUI/MainGUI.py:1183
msgid "Plot Area"
msgstr "Plot Area"

#: AppGUI/MainGUI.py:1210
msgid "General"
msgstr "General"

#: AppGUI/MainGUI.py:1225 AppTools/ToolCopperThieving.py:74
#: AppTools/ToolDblSided.py:64 AppTools/ToolExtractDrills.py:61
#: AppTools/ToolInvertGerber.py:72 AppTools/ToolOptimal.py:71
#: AppTools/ToolPunchGerber.py:64
msgid "GERBER"
msgstr "GERBER"

#: AppGUI/MainGUI.py:1235 AppTools/ToolDblSided.py:92
msgid "EXCELLON"
msgstr "EXCELLON"

#: AppGUI/MainGUI.py:1245 AppTools/ToolDblSided.py:120
msgid "GEOMETRY"
msgstr "GEOMETRY"

#: AppGUI/MainGUI.py:1255
msgid "CNC-JOB"
msgstr "CNC-JOB"

#: AppGUI/MainGUI.py:1264 AppGUI/ObjectUI.py:563 AppGUI/ObjectUI.py:2262
msgid "TOOLS"
msgstr "TOOLS"

#: AppGUI/MainGUI.py:1273
msgid "TOOLS 2"
msgstr "TOOLS 2"

#: AppGUI/MainGUI.py:1283
msgid "UTILITIES"
msgstr "UTILITIES"

#: AppGUI/MainGUI.py:1300
#: AppGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:192
msgid "Restore Defaults"
msgstr "Restore Defaults"

#: AppGUI/MainGUI.py:1303
msgid ""
"Restore the entire set of default values\n"
"to the initial values loaded after first launch."
msgstr ""
"Restore the entire set of default values\n"
"to the initial values loaded after first launch."

#: AppGUI/MainGUI.py:1308
msgid "Open Pref Folder"
msgstr "Open Pref Folder"

#: AppGUI/MainGUI.py:1311
msgid "Open the folder where FlatCAM save the preferences files."
msgstr "Open the folder where FlatCAM save the preferences files."

#: AppGUI/MainGUI.py:1315 AppGUI/MainGUI.py:1773
msgid "Clear GUI Settings"
msgstr "Clear GUI Settings"

#: AppGUI/MainGUI.py:1319
msgid ""
"Clear the GUI settings for FlatCAM,\n"
"such as: layout, gui state, style, hdpi support etc."
msgstr ""
"Clear the GUI settings for FlatCAM,\n"
"such as: layout, gui state, style, hdpi support etc."

#: AppGUI/MainGUI.py:1330
msgid "Apply"
msgstr "Apply"

#: AppGUI/MainGUI.py:1333
msgid "Apply the current preferences without saving to a file."
msgstr "Apply the current preferences without saving to a file."

#: AppGUI/MainGUI.py:1340
msgid ""
"Save the current settings in the 'current_defaults' file\n"
"which is the file storing the working default preferences."
msgstr ""
"Save the current settings in the 'current_defaults' file\n"
"which is the file storing the working default preferences."

#: AppGUI/MainGUI.py:1348
msgid "Will not save the changes and will close the preferences window."
msgstr "Will not save the changes and will close the preferences window."

#: AppGUI/MainGUI.py:1362
msgid "Toggle Visibility"
msgstr "Toggle Visibility"

#: AppGUI/MainGUI.py:1368
msgid "New"
msgstr "New"

#: AppGUI/MainGUI.py:1370 AppGUI/ObjectUI.py:450
#: AppObjects/FlatCAMGerber.py:239 AppObjects/FlatCAMGerber.py:327
#: AppTools/ToolCalibration.py:631 AppTools/ToolCalibration.py:648
#: AppTools/ToolCalibration.py:815 AppTools/ToolCopperThieving.py:144
#: AppTools/ToolCopperThieving.py:158 AppTools/ToolCopperThieving.py:604
#: AppTools/ToolCutOut.py:92 AppTools/ToolDblSided.py:226
#: AppTools/ToolFilm.py:69 AppTools/ToolFilm.py:92 AppTools/ToolImage.py:49
#: AppTools/ToolImage.py:271 AppTools/ToolNCC.py:95 AppTools/ToolNCC.py:558
#: AppTools/ToolNCC.py:1300 AppTools/ToolPaint.py:501 AppTools/ToolPaint.py:705
#: AppTools/ToolPanelize.py:116 AppTools/ToolPanelize.py:385
#: AppTools/ToolPanelize.py:402
msgid "Geometry"
msgstr "Geometry"

#: AppGUI/MainGUI.py:1374
#: AppGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:99
#: AppTools/ToolAlignObjects.py:74 AppTools/ToolAlignObjects.py:110
#: AppTools/ToolCalibration.py:197 AppTools/ToolCalibration.py:631
#: AppTools/ToolCalibration.py:648 AppTools/ToolCalibration.py:807
#: AppTools/ToolCalibration.py:815 AppTools/ToolCopperThieving.py:144
#: AppTools/ToolCopperThieving.py:158 AppTools/ToolCopperThieving.py:604
#: AppTools/ToolDblSided.py:225 AppTools/ToolFilm.py:342
#: AppTools/ToolNCC.py:558 AppTools/ToolNCC.py:1300 AppTools/ToolPaint.py:501
#: AppTools/ToolPaint.py:705 AppTools/ToolPanelize.py:385
#: AppTools/ToolPunchGerber.py:149 AppTools/ToolPunchGerber.py:164
msgid "Excellon"
msgstr "Excellon"

#: AppGUI/MainGUI.py:1381
msgid "Grids"
msgstr "Grids"

#: AppGUI/MainGUI.py:1388
msgid "Clear Plot"
msgstr "Clear Plot"

#: AppGUI/MainGUI.py:1390
msgid "Replot"
msgstr "Replot"

#: AppGUI/MainGUI.py:1394
msgid "Geo Editor"
msgstr "Geo Editor"

#: AppGUI/MainGUI.py:1396
msgid "Path"
msgstr "Path"

#: AppGUI/MainGUI.py:1398
msgid "Rectangle"
msgstr "Rectangle"

#: AppGUI/MainGUI.py:1401
msgid "Circle"
msgstr "Circle"

#: AppGUI/MainGUI.py:1405
msgid "Arc"
msgstr "Arc"

#: AppGUI/MainGUI.py:1419
msgid "Union"
msgstr "Union"

#: AppGUI/MainGUI.py:1421
msgid "Intersection"
msgstr "Intersection"

#: AppGUI/MainGUI.py:1423
msgid "Subtraction"
msgstr "Subtraction"

#: AppGUI/MainGUI.py:1425 AppGUI/ObjectUI.py:2351
#: AppGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:56
msgid "Cut"
msgstr "Cut"

#: AppGUI/MainGUI.py:1436
msgid "Pad"
msgstr "Pad"

#: AppGUI/MainGUI.py:1438
msgid "Pad Array"
msgstr "Pad Array"

#: AppGUI/MainGUI.py:1442
msgid "Track"
msgstr "Track"

#: AppGUI/MainGUI.py:1444
msgid "Region"
msgstr "Region"

#: AppGUI/MainGUI.py:1467
msgid "Exc Editor"
msgstr "Exc Editor"

#: AppGUI/MainGUI.py:1469 AppGUI/MainGUI.py:4277
msgid "Add Drill"
msgstr "Add Drill"

#: AppGUI/MainGUI.py:1489 App_Main.py:2220
msgid "Close Editor"
msgstr "Close Editor"

#: AppGUI/MainGUI.py:1514
msgid ""
"Absolute measurement.\n"
"Reference is (X=0, Y= 0) position"
msgstr ""
"Absolute measurement.\n"
"Reference is (X=0, Y= 0) position"

#: AppGUI/MainGUI.py:1615
msgid "Lock Toolbars"
msgstr "Lock Toolbars"

#: AppGUI/MainGUI.py:1761
msgid "FlatCAM Preferences Folder opened."
msgstr "FlatCAM Preferences Folder opened."

#: AppGUI/MainGUI.py:1772
msgid "Are you sure you want to delete the GUI Settings? \n"
msgstr "Are you sure you want to delete the GUI Settings? \n"

#: AppGUI/MainGUI.py:1775 AppGUI/preferences/PreferencesUIManager.py:941
#: AppGUI/preferences/PreferencesUIManager.py:1179 AppTranslation.py:109
#: AppTranslation.py:206 App_Main.py:2223 App_Main.py:3094 App_Main.py:5526
#: App_Main.py:6586
msgid "Yes"
msgstr "Yes"

#: AppGUI/MainGUI.py:1776 AppGUI/preferences/PreferencesUIManager.py:1180
#: AppGUI/preferences/tools/ToolsNCCPrefGroupUI.py:164
#: AppGUI/preferences/tools/ToolsPaintPrefGroupUI.py:150
#: AppTools/ToolNCC.py:182 AppTools/ToolPaint.py:165 AppTranslation.py:110
#: AppTranslation.py:207 App_Main.py:2224 App_Main.py:3095 App_Main.py:5527
#: App_Main.py:6587
msgid "No"
msgstr "No"

#: AppGUI/MainGUI.py:1875
msgid "&Cutout Tool"
msgstr "&Cutout Tool"

#: AppGUI/MainGUI.py:1947
msgid "Select 'Esc'"
msgstr "Select 'Esc'"

#: AppGUI/MainGUI.py:1985
msgid "Copy Objects"
msgstr "Copy Objects"

#: AppGUI/MainGUI.py:1987 AppGUI/MainGUI.py:4197
msgid "Delete Shape"
msgstr "Delete Shape"

#: AppGUI/MainGUI.py:1993
msgid "Move Objects"
msgstr "Move Objects"

#: AppGUI/MainGUI.py:2577
msgid ""
"Please first select a geometry item to be cutted\n"
"then select the geometry item that will be cutted\n"
"out of the first item. In the end press ~X~ key or\n"
"the toolbar button."
msgstr ""
"Please first select a geometry item to be cutted\n"
"then select the geometry item that will be cutted\n"
"out of the first item. In the end press ~X~ key or\n"
"the toolbar button."

#: AppGUI/MainGUI.py:2584 AppGUI/MainGUI.py:2746 AppGUI/MainGUI.py:2791
#: AppGUI/MainGUI.py:2811
msgid "Warning"
msgstr "Warning"

#: AppGUI/MainGUI.py:2741
msgid ""
"Please select geometry items \n"
"on which to perform Intersection Tool."
msgstr ""
"Please select geometry items \n"
"on which to perform Intersection Tool."

#: AppGUI/MainGUI.py:2786
msgid ""
"Please select geometry items \n"
"on which to perform Substraction Tool."
msgstr ""
"Please select geometry items \n"
"on which to perform Substraction Tool."

#: AppGUI/MainGUI.py:2806
msgid ""
"Please select geometry items \n"
"on which to perform union."
msgstr ""
"Please select geometry items \n"
"on which to perform union."

#: AppGUI/MainGUI.py:2889 AppGUI/MainGUI.py:3104
msgid "Cancelled. Nothing selected to delete."
msgstr "Cancelled. Nothing selected to delete."

#: AppGUI/MainGUI.py:2973 AppGUI/MainGUI.py:3220
msgid "Cancelled. Nothing selected to copy."
msgstr "Cancelled. Nothing selected to copy."

#: AppGUI/MainGUI.py:3019 AppGUI/MainGUI.py:3249
msgid "Cancelled. Nothing selected to move."
msgstr "Cancelled. Nothing selected to move."

#: AppGUI/MainGUI.py:3275
msgid "New Tool ..."
msgstr "New Tool ..."

#: AppGUI/MainGUI.py:3276 AppTools/ToolNCC.py:924 AppTools/ToolPaint.py:849
#: AppTools/ToolSolderPaste.py:560
msgid "Enter a Tool Diameter"
msgstr "Enter a Tool Diameter"

#: AppGUI/MainGUI.py:3288
msgid "Adding Tool cancelled ..."
msgstr "Adding Tool cancelled ..."

#: AppGUI/MainGUI.py:3302
msgid "Distance Tool exit..."
msgstr "Distance Tool exit..."

#: AppGUI/MainGUI.py:3481 App_Main.py:3084
msgid "Application is saving the project. Please wait ..."
msgstr "Application is saving the project. Please wait ..."

#: AppGUI/MainGUI.py:3616 App_Main.py:9309
msgid "<b>Shortcut Key List</b>"
msgstr "<b>Shortcut Key List</b>"

#: AppGUI/MainGUI.py:3977
#| msgid "Key Shortcut List"
msgid "General Shortcut list"
msgstr "General Shortcut list"

#: AppGUI/MainGUI.py:3978
msgid "SHOW SHORTCUT LIST"
msgstr "SHOW SHORTCUT LIST"

#: AppGUI/MainGUI.py:3978
msgid "Switch to Project Tab"
msgstr "Switch to Project Tab"

#: AppGUI/MainGUI.py:3978
msgid "Switch to Selected Tab"
msgstr "Switch to Selected Tab"

#: AppGUI/MainGUI.py:3979
msgid "Switch to Tool Tab"
msgstr "Switch to Tool Tab"

#: AppGUI/MainGUI.py:3980
msgid "New Gerber"
msgstr "New Gerber"

#: AppGUI/MainGUI.py:3980
msgid "Edit Object (if selected)"
msgstr "Edit Object (if selected)"

#: AppGUI/MainGUI.py:3980 App_Main.py:5831
msgid "Grid On/Off"
msgstr "Grid On/Off"

#: AppGUI/MainGUI.py:3980
msgid "Jump to Coordinates"
msgstr "Jump to Coordinates"

#: AppGUI/MainGUI.py:3981
msgid "New Excellon"
msgstr "New Excellon"

#: AppGUI/MainGUI.py:3981
msgid "Move Obj"
msgstr "Move Obj"

#: AppGUI/MainGUI.py:3981
msgid "New Geometry"
msgstr "New Geometry"

#: AppGUI/MainGUI.py:3981
msgid "Change Units"
msgstr "Change Units"

#: AppGUI/MainGUI.py:3982
msgid "Open Properties Tool"
msgstr "Open Properties Tool"

#: AppGUI/MainGUI.py:3982
msgid "Rotate by 90 degree CW"
msgstr "Rotate by 90 degree CW"

#: AppGUI/MainGUI.py:3982
msgid "Shell Toggle"
msgstr "Shell Toggle"

#: AppGUI/MainGUI.py:3983
msgid ""
"Add a Tool (when in Geometry Selected Tab or in Tools NCC or Tools Paint)"
msgstr ""
"Add a Tool (when in Geometry Selected Tab or in Tools NCC or Tools Paint)"

#: AppGUI/MainGUI.py:3984
msgid "Flip on X_axis"
msgstr "Flip on X_axis"

#: AppGUI/MainGUI.py:3984
msgid "Flip on Y_axis"
msgstr "Flip on Y_axis"

#: AppGUI/MainGUI.py:3987
msgid "Copy Obj"
msgstr "Copy Obj"

#: AppGUI/MainGUI.py:3987
msgid "Open Tools Database"
msgstr "Open Tools Database"

#: AppGUI/MainGUI.py:3988
msgid "Open Excellon File"
msgstr "Open Excellon File"

#: AppGUI/MainGUI.py:3988
msgid "Open Gerber File"
msgstr "Open Gerber File"

#: AppGUI/MainGUI.py:3988
msgid "New Project"
msgstr "New Project"

#: AppGUI/MainGUI.py:3989 App_Main.py:6876 App_Main.py:6879
msgid "Open Project"
msgstr "Open Project"

#: AppGUI/MainGUI.py:3989 AppTools/ToolPDF.py:41
msgid "PDF Import Tool"
msgstr "PDF Import Tool"

#: AppGUI/MainGUI.py:3989
msgid "Save Project"
msgstr "Save Project"

#: AppGUI/MainGUI.py:3989
msgid "Toggle Plot Area"
msgstr "Toggle Plot Area"

#: AppGUI/MainGUI.py:3992
msgid "Copy Obj_Name"
msgstr "Copy Obj_Name"

#: AppGUI/MainGUI.py:3993
msgid "Toggle Code Editor"
msgstr "Toggle Code Editor"

#: AppGUI/MainGUI.py:3993
msgid "Toggle the axis"
msgstr "Toggle the axis"

#: AppGUI/MainGUI.py:3993 AppGUI/MainGUI.py:4192 AppGUI/MainGUI.py:4279
#: AppGUI/MainGUI.py:4401
msgid "Distance Minimum Tool"
msgstr "Distance Minimum Tool"

#: AppGUI/MainGUI.py:3994
msgid "Open Preferences Window"
msgstr "Open Preferences Window"

#: AppGUI/MainGUI.py:3995
msgid "Rotate by 90 degree CCW"
msgstr "Rotate by 90 degree CCW"

#: AppGUI/MainGUI.py:3995
msgid "Run a Script"
msgstr "Run a Script"

#: AppGUI/MainGUI.py:3995
msgid "Toggle the workspace"
msgstr "Toggle the workspace"

#: AppGUI/MainGUI.py:3995
msgid "Skew on X axis"
msgstr "Skew on X axis"

#: AppGUI/MainGUI.py:3996
msgid "Skew on Y axis"
msgstr "Skew on Y axis"

#: AppGUI/MainGUI.py:3999
msgid "2-Sided PCB Tool"
msgstr "2-Sided PCB Tool"

#: AppGUI/MainGUI.py:3999
msgid "Transformations Tool"
msgstr "Transformations Tool"

#: AppGUI/MainGUI.py:4001
msgid "Solder Paste Dispensing Tool"
msgstr "Solder Paste Dispensing Tool"

#: AppGUI/MainGUI.py:4002
msgid "Film PCB Tool"
msgstr "Film PCB Tool"

#: AppGUI/MainGUI.py:4002
msgid "Non-Copper Clearing Tool"
msgstr "Non-Copper Clearing Tool"

#: AppGUI/MainGUI.py:4003
msgid "Paint Area Tool"
msgstr "Paint Area Tool"

#: AppGUI/MainGUI.py:4003
msgid "Rules Check Tool"
msgstr "Rules Check Tool"

#: AppGUI/MainGUI.py:4004
msgid "View File Source"
msgstr "View File Source"

#: AppGUI/MainGUI.py:4005
msgid "Cutout PCB Tool"
msgstr "Cutout PCB Tool"

#: AppGUI/MainGUI.py:4005
msgid "Enable all Plots"
msgstr "Enable all Plots"

#: AppGUI/MainGUI.py:4005
msgid "Disable all Plots"
msgstr "Disable all Plots"

#: AppGUI/MainGUI.py:4005
msgid "Disable Non-selected Plots"
msgstr "Disable Non-selected Plots"

#: AppGUI/MainGUI.py:4006
msgid "Toggle Full Screen"
msgstr "Toggle Full Screen"

#: AppGUI/MainGUI.py:4009
msgid "Abort current task (gracefully)"
msgstr "Abort current task (gracefully)"

#: AppGUI/MainGUI.py:4012
msgid "Save Project As"
msgstr "Save Project As"

#: AppGUI/MainGUI.py:4013
msgid ""
"Paste Special. Will convert a Windows path style to the one required in Tcl "
"Shell"
msgstr ""
"Paste Special. Will convert a Windows path style to the one required in Tcl "
"Shell"

#: AppGUI/MainGUI.py:4016
msgid "Open Online Manual"
msgstr "Open Online Manual"

#: AppGUI/MainGUI.py:4017
msgid "Open Online Tutorials"
msgstr "Open Online Tutorials"

#: AppGUI/MainGUI.py:4017
msgid "Refresh Plots"
msgstr "Refresh Plots"

#: AppGUI/MainGUI.py:4017 AppTools/ToolSolderPaste.py:509
msgid "Delete Object"
msgstr "Delete Object"

#: AppGUI/MainGUI.py:4017
msgid "Alternate: Delete Tool"
msgstr "Alternate: Delete Tool"

#: AppGUI/MainGUI.py:4018
msgid "(left to Key_1)Toggle Notebook Area (Left Side)"
msgstr "(left to Key_1)Toggle Notebook Area (Left Side)"

#: AppGUI/MainGUI.py:4018
msgid "En(Dis)able Obj Plot"
msgstr "En(Dis)able Obj Plot"

#: AppGUI/MainGUI.py:4019
msgid "Deselects all objects"
msgstr "Deselects all objects"

#: AppGUI/MainGUI.py:4033
msgid "Editor Shortcut list"
msgstr "Editor Shortcut list"

#: AppGUI/MainGUI.py:4187
msgid "GEOMETRY EDITOR"
msgstr "GEOMETRY EDITOR"

#: AppGUI/MainGUI.py:4187
msgid "Draw an Arc"
msgstr "Draw an Arc"

#: AppGUI/MainGUI.py:4187
msgid "Copy Geo Item"
msgstr "Copy Geo Item"

#: AppGUI/MainGUI.py:4188
msgid "Within Add Arc will toogle the ARC direction: CW or CCW"
msgstr "Within Add Arc will toogle the ARC direction: CW or CCW"

#: AppGUI/MainGUI.py:4188
msgid "Polygon Intersection Tool"
msgstr "Polygon Intersection Tool"

#: AppGUI/MainGUI.py:4189
msgid "Geo Paint Tool"
msgstr "Geo Paint Tool"

#: AppGUI/MainGUI.py:4189 AppGUI/MainGUI.py:4278 AppGUI/MainGUI.py:4398
msgid "Jump to Location (x, y)"
msgstr "Jump to Location (x, y)"

#: AppGUI/MainGUI.py:4189
msgid "Toggle Corner Snap"
msgstr "Toggle Corner Snap"

#: AppGUI/MainGUI.py:4189
msgid "Move Geo Item"
msgstr "Move Geo Item"

#: AppGUI/MainGUI.py:4190
msgid "Within Add Arc will cycle through the ARC modes"
msgstr "Within Add Arc will cycle through the ARC modes"

#: AppGUI/MainGUI.py:4190
msgid "Draw a Polygon"
msgstr "Draw a Polygon"

#: AppGUI/MainGUI.py:4190
msgid "Draw a Circle"
msgstr "Draw a Circle"

#: AppGUI/MainGUI.py:4191
msgid "Draw a Path"
msgstr "Draw a Path"

#: AppGUI/MainGUI.py:4191
msgid "Draw Rectangle"
msgstr "Draw Rectangle"

#: AppGUI/MainGUI.py:4191
msgid "Polygon Subtraction Tool"
msgstr "Polygon Subtraction Tool"

#: AppGUI/MainGUI.py:4191
msgid "Add Text Tool"
msgstr "Add Text Tool"

#: AppGUI/MainGUI.py:4192
msgid "Polygon Union Tool"
msgstr "Polygon Union Tool"

#: AppGUI/MainGUI.py:4192
msgid "Flip shape on X axis"
msgstr "Flip shape on X axis"

#: AppGUI/MainGUI.py:4192
msgid "Flip shape on Y axis"
msgstr "Flip shape on Y axis"

#: AppGUI/MainGUI.py:4193
msgid "Skew shape on X axis"
msgstr "Skew shape on X axis"

#: AppGUI/MainGUI.py:4193
msgid "Skew shape on Y axis"
msgstr "Skew shape on Y axis"

#: AppGUI/MainGUI.py:4193
msgid "Editor Transformation Tool"
msgstr "Editor Transformation Tool"

#: AppGUI/MainGUI.py:4194
msgid "Offset shape on X axis"
msgstr "Offset shape on X axis"

#: AppGUI/MainGUI.py:4194
msgid "Offset shape on Y axis"
msgstr "Offset shape on Y axis"

#: AppGUI/MainGUI.py:4195 AppGUI/MainGUI.py:4281 AppGUI/MainGUI.py:4403
msgid "Save Object and Exit Editor"
msgstr "Save Object and Exit Editor"

#: AppGUI/MainGUI.py:4195
msgid "Polygon Cut Tool"
msgstr "Polygon Cut Tool"

#: AppGUI/MainGUI.py:4196
msgid "Rotate Geometry"
msgstr "Rotate Geometry"

#: AppGUI/MainGUI.py:4196
msgid "Finish drawing for certain tools"
msgstr "Finish drawing for certain tools"

#: AppGUI/MainGUI.py:4196 AppGUI/MainGUI.py:4281 AppGUI/MainGUI.py:4401
msgid "Abort and return to Select"
msgstr "Abort and return to Select"

#: AppGUI/MainGUI.py:4277
msgid "EXCELLON EDITOR"
msgstr "EXCELLON EDITOR"

#: AppGUI/MainGUI.py:4277
msgid "Copy Drill(s)"
msgstr "Copy Drill(s)"

#: AppGUI/MainGUI.py:4278
msgid "Move Drill(s)"
msgstr "Move Drill(s)"

#: AppGUI/MainGUI.py:4279
msgid "Add a new Tool"
msgstr "Add a new Tool"

#: AppGUI/MainGUI.py:4280
msgid "Delete Drill(s)"
msgstr "Delete Drill(s)"

#: AppGUI/MainGUI.py:4280
msgid "Alternate: Delete Tool(s)"
msgstr "Alternate: Delete Tool(s)"

#: AppGUI/MainGUI.py:4397
msgid "GERBER EDITOR"
msgstr "GERBER EDITOR"

#: AppGUI/MainGUI.py:4397
msgid "Add Disc"
msgstr "Add Disc"

#: AppGUI/MainGUI.py:4397
msgid "Add SemiDisc"
msgstr "Add SemiDisc"

#: AppGUI/MainGUI.py:4399
msgid "Within Track & Region Tools will cycle in REVERSE the bend modes"
msgstr "Within Track & Region Tools will cycle in REVERSE the bend modes"

#: AppGUI/MainGUI.py:4400
msgid "Within Track & Region Tools will cycle FORWARD the bend modes"
msgstr "Within Track & Region Tools will cycle FORWARD the bend modes"

#: AppGUI/MainGUI.py:4401
msgid "Alternate: Delete Apertures"
msgstr "Alternate: Delete Apertures"

#: AppGUI/MainGUI.py:4402
msgid "Eraser Tool"
msgstr "Eraser Tool"

#: AppGUI/MainGUI.py:4403
#: AppGUI/preferences/gerber/GerberEditorPrefGroupUI.py:220
msgid "Mark Area Tool"
msgstr "Mark Area Tool"

#: AppGUI/MainGUI.py:4403
msgid "Poligonize Tool"
msgstr "Poligonize Tool"

#: AppGUI/MainGUI.py:4403
msgid "Transformation Tool"
msgstr "Transformation Tool"

#: AppGUI/ObjectUI.py:38
msgid "FlatCAM Object"
msgstr "FlatCAM Object"

#: AppGUI/ObjectUI.py:78
msgid ""
"BASIC is suitable for a beginner. Many parameters\n"
"are hidden from the user in this mode.\n"
"ADVANCED mode will make available all parameters.\n"
"\n"
"To change the application LEVEL, go to:\n"
"Edit -> Preferences -> General and check:\n"
"'APP. LEVEL' radio button."
msgstr ""
"BASIC is suitable for a beginner. Many parameters\n"
"are hidden from the user in this mode.\n"
"ADVANCED mode will make available all parameters.\n"
"\n"
"To change the application LEVEL, go to:\n"
"Edit -> Preferences -> General and check:\n"
"'APP. LEVEL' radio button."

#: AppGUI/ObjectUI.py:111
msgid "Geometrical transformations of the current object."
msgstr "Geometrical transformations of the current object."

#: AppGUI/ObjectUI.py:120
msgid ""
"Factor by which to multiply\n"
"geometric features of this object.\n"
"Expressions are allowed. E.g: 1/25.4"
msgstr ""
"Factor by which to multiply\n"
"geometric features of this object.\n"
"Expressions are allowed. E.g: 1/25.4"

#: AppGUI/ObjectUI.py:127
msgid "Perform scaling operation."
msgstr "Perform scaling operation."

#: AppGUI/ObjectUI.py:138
msgid ""
"Amount by which to move the object\n"
"in the x and y axes in (x, y) format.\n"
"Expressions are allowed. E.g: (1/3.2, 0.5*3)"
msgstr ""
"Amount by which to move the object\n"
"in the x and y axes in (x, y) format.\n"
"Expressions are allowed. E.g: (1/3.2, 0.5*3)"

#: AppGUI/ObjectUI.py:145
msgid "Perform the offset operation."
msgstr "Perform the offset operation."

#: AppGUI/ObjectUI.py:157 AppGUI/ObjectUI.py:164 AppTool.py:281 AppTool.py:287
msgid "Edited value is out of range"
msgstr "Edited value is out of range"

#: AppGUI/ObjectUI.py:159 AppGUI/ObjectUI.py:166 AppTool.py:283 AppTool.py:289
msgid "Edited value is within limits."
msgstr "Edited value is within limits."

#: AppGUI/ObjectUI.py:178 AppTools/ToolCorners.py:55
msgid "Gerber Object"
msgstr "Gerber Object"

#: AppGUI/ObjectUI.py:187 AppGUI/ObjectUI.py:730 AppGUI/ObjectUI.py:1528
#: AppGUI/ObjectUI.py:2335 AppGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:30
#: AppGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:33
#: AppGUI/preferences/geometry/GeometryGenPrefGroupUI.py:31
#: AppGUI/preferences/gerber/GerberGenPrefGroupUI.py:31
msgid "Plot Options"
msgstr "Plot Options"

#: AppGUI/ObjectUI.py:193 AppGUI/ObjectUI.py:731
#: AppGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:45
#: AppGUI/preferences/gerber/GerberGenPrefGroupUI.py:38
#: AppGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:119
#: AppTools/ToolCopperThieving.py:191
msgid "Solid"
msgstr "Solid"

#: AppGUI/ObjectUI.py:195 AppGUI/preferences/gerber/GerberGenPrefGroupUI.py:40
msgid "Solid color polygons."
msgstr "Solid color polygons."

#: AppGUI/ObjectUI.py:201
msgid "Multi-Color"
msgstr "Multi-Color"

#: AppGUI/ObjectUI.py:203 AppGUI/preferences/gerber/GerberGenPrefGroupUI.py:47
msgid "Draw polygons in different colors."
msgstr "Draw polygons in different colors."

#: AppGUI/ObjectUI.py:209 AppGUI/ObjectUI.py:769
#: AppGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:39
#: AppGUI/preferences/geometry/GeometryGenPrefGroupUI.py:35
#: AppGUI/preferences/gerber/GerberGenPrefGroupUI.py:52
msgid "Plot"
msgstr "Plot"

#: AppGUI/ObjectUI.py:211 AppGUI/ObjectUI.py:771 AppGUI/ObjectUI.py:1588
#: AppGUI/ObjectUI.py:2445 AppGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:41
#: AppGUI/preferences/geometry/GeometryGenPrefGroupUI.py:37
#: AppGUI/preferences/gerber/GerberGenPrefGroupUI.py:54
msgid "Plot (show) this object."
msgstr "Plot (show) this object."

#: AppGUI/ObjectUI.py:239
msgid ""
"Toggle the display of the Gerber Apertures Table.\n"
"When unchecked, it will delete all mark shapes\n"
"that are drawn on canvas."
msgstr ""
"Toggle the display of the Gerber Apertures Table.\n"
"When unchecked, it will delete all mark shapes\n"
"that are drawn on canvas."

#: AppGUI/ObjectUI.py:249
msgid "Mark All"
msgstr "Mark All"

#: AppGUI/ObjectUI.py:251
msgid ""
"When checked it will display all the apertures.\n"
"When unchecked, it will delete all mark shapes\n"
"that are drawn on canvas."
msgstr ""
"When checked it will display all the apertures.\n"
"When unchecked, it will delete all mark shapes\n"
"that are drawn on canvas."

#: AppGUI/ObjectUI.py:279
msgid "Mark the aperture instances on canvas."
msgstr "Mark the aperture instances on canvas."

#: AppGUI/ObjectUI.py:291 AppGUI/preferences/gerber/GerberOptPrefGroupUI.py:32
msgid "Isolation Routing"
msgstr "Isolation Routing"

#: AppGUI/ObjectUI.py:293 AppGUI/preferences/gerber/GerberOptPrefGroupUI.py:34
msgid ""
"Create a Geometry object with\n"
"toolpaths to cut outside polygons."
msgstr ""
"Create a Geometry object with\n"
"toolpaths to cut outside polygons."

#: AppGUI/ObjectUI.py:311
#: AppGUI/preferences/gerber/GerberAdvOptPrefGroupUI.py:69
msgid ""
"Choose which tool to use for Gerber isolation:\n"
"'Circular' or 'V-shape'.\n"
"When the 'V-shape' is selected then the tool\n"
"diameter will depend on the chosen cut depth."
msgstr ""
"Choose which tool to use for Gerber isolation:\n"
"'Circular' or 'V-shape'.\n"
"When the 'V-shape' is selected then the tool\n"
"diameter will depend on the chosen cut depth."

#: AppGUI/ObjectUI.py:317
msgid "V-Shape"
msgstr "V-Shape"

#: AppGUI/ObjectUI.py:323 AppGUI/ObjectUI.py:1774
#: AppGUI/preferences/gerber/GerberAdvOptPrefGroupUI.py:81
#: AppGUI/preferences/tools/ToolsNCCPrefGroupUI.py:72
#: AppGUI/preferences/tools/ToolsPaintPrefGroupUI.py:78
#: AppGUI/preferences/tools/ToolsPaintPrefGroupUI.py:85 AppTools/ToolNCC.py:233
#: AppTools/ToolNCC.py:240 AppTools/ToolPaint.py:215
msgid "V-Tip Dia"
msgstr "V-Tip Dia"

#: AppGUI/ObjectUI.py:325 AppGUI/ObjectUI.py:1777
#: AppGUI/preferences/gerber/GerberAdvOptPrefGroupUI.py:83
#: AppGUI/preferences/tools/ToolsNCCPrefGroupUI.py:74
#: AppGUI/preferences/tools/ToolsPaintPrefGroupUI.py:80 AppTools/ToolNCC.py:235
#: AppTools/ToolPaint.py:217
msgid "The tip diameter for V-Shape Tool"
msgstr "The tip diameter for V-Shape Tool"

#: AppGUI/ObjectUI.py:336 AppGUI/ObjectUI.py:1789
#: AppGUI/preferences/gerber/GerberAdvOptPrefGroupUI.py:94
#: AppGUI/preferences/tools/ToolsNCCPrefGroupUI.py:84
#: AppGUI/preferences/tools/ToolsPaintPrefGroupUI.py:91
#: AppGUI/preferences/tools/ToolsPaintPrefGroupUI.py:99 AppTools/ToolNCC.py:246
#: AppTools/ToolNCC.py:254 AppTools/ToolPaint.py:228
msgid "V-Tip Angle"
msgstr "V-Tip Angle"

#: AppGUI/ObjectUI.py:338 AppGUI/ObjectUI.py:1792
#: AppGUI/preferences/gerber/GerberAdvOptPrefGroupUI.py:96
#: AppGUI/preferences/tools/ToolsNCCPrefGroupUI.py:86
#: AppGUI/preferences/tools/ToolsPaintPrefGroupUI.py:93 AppTools/ToolNCC.py:248
#: AppTools/ToolPaint.py:230
msgid ""
"The tip angle for V-Shape Tool.\n"
"In degree."
msgstr ""
"The tip angle for V-Shape Tool.\n"
"In degree."

#: AppGUI/ObjectUI.py:352 AppGUI/ObjectUI.py:1808
#: AppGUI/preferences/geometry/GeometryOptPrefGroupUI.py:50
#: AppGUI/preferences/gerber/GerberAdvOptPrefGroupUI.py:109
#: AppGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:61
#: AppObjects/FlatCAMGeometry.py:1229 AppTools/ToolCutOut.py:141
msgid ""
"Cutting depth (negative)\n"
"below the copper surface."
msgstr ""
"Cutting depth (negative)\n"
"below the copper surface."

#: AppGUI/ObjectUI.py:366
msgid ""
"Diameter of the cutting tool.\n"
"If you want to have an isolation path\n"
"inside the actual shape of the Gerber\n"
"feature, use a negative value for\n"
"this parameter."
msgstr ""
"Diameter of the cutting tool.\n"
"If you want to have an isolation path\n"
"inside the actual shape of the Gerber\n"
"feature, use a negative value for\n"
"this parameter."

#: AppGUI/ObjectUI.py:382 AppGUI/preferences/gerber/GerberOptPrefGroupUI.py:56
msgid "# Passes"
msgstr "# Passes"

#: AppGUI/ObjectUI.py:384 AppGUI/preferences/gerber/GerberOptPrefGroupUI.py:58
msgid ""
"Width of the isolation gap in\n"
"number (integer) of tool widths."
msgstr ""
"Width of the isolation gap in\n"
"number (integer) of tool widths."

#: AppGUI/ObjectUI.py:395 AppGUI/preferences/gerber/GerberOptPrefGroupUI.py:68
msgid "Pass overlap"
msgstr "Pass overlap"

#: AppGUI/ObjectUI.py:397 AppGUI/preferences/gerber/GerberOptPrefGroupUI.py:70
msgid "How much (percentage) of the tool width to overlap each tool pass."
msgstr "How much (percentage) of the tool width to overlap each tool pass."

#: AppGUI/ObjectUI.py:411
#: AppGUI/preferences/geometry/GeometryEditorPrefGroupUI.py:58
#: AppGUI/preferences/gerber/GerberOptPrefGroupUI.py:97
msgid ""
"Milling type:\n"
"- climb / best for precision milling and to reduce tool usage\n"
"- conventional / useful when there is no backlash compensation"
msgstr ""
"Milling type:\n"
"- climb / best for precision milling and to reduce tool usage\n"
"- conventional / useful when there is no backlash compensation"

#: AppGUI/ObjectUI.py:421
msgid "Combine"
msgstr "Combine"

#: AppGUI/ObjectUI.py:423 AppGUI/preferences/gerber/GerberOptPrefGroupUI.py:109
msgid "Combine all passes into one object"
msgstr "Combine all passes into one object"

#: AppGUI/ObjectUI.py:427
#: AppGUI/preferences/gerber/GerberAdvOptPrefGroupUI.py:43
msgid "\"Follow\""
msgstr "\"Follow\""

#: AppGUI/ObjectUI.py:428
#: AppGUI/preferences/gerber/GerberAdvOptPrefGroupUI.py:45
msgid ""
"Generate a 'Follow' geometry.\n"
"This means that it will cut through\n"
"the middle of the trace."
msgstr ""
"Generate a 'Follow' geometry.\n"
"This means that it will cut through\n"
"the middle of the trace."

#: AppGUI/ObjectUI.py:434
msgid "Except"
msgstr "Except"

#: AppGUI/ObjectUI.py:437
msgid ""
"When the isolation geometry is generated,\n"
"by checking this, the area of the object below\n"
"will be subtracted from the isolation geometry."
msgstr ""
"When the isolation geometry is generated,\n"
"by checking this, the area of the object below\n"
"will be subtracted from the isolation geometry."

#: AppGUI/ObjectUI.py:450
#: AppGUI/preferences/tools/ToolsPanelizePrefGroupUI.py:97
#: AppObjects/FlatCAMGerber.py:239 AppObjects/FlatCAMGerber.py:327
#: AppTools/ToolAlignObjects.py:73 AppTools/ToolAlignObjects.py:109
#: AppTools/ToolCalibration.py:196 AppTools/ToolCalibration.py:631
#: AppTools/ToolCalibration.py:648 AppTools/ToolCalibration.py:807
#: AppTools/ToolCalibration.py:815 AppTools/ToolCopperThieving.py:144
#: AppTools/ToolCopperThieving.py:158 AppTools/ToolCopperThieving.py:604
#: AppTools/ToolCutOut.py:91 AppTools/ToolDblSided.py:224
#: AppTools/ToolFilm.py:68 AppTools/ToolFilm.py:91 AppTools/ToolImage.py:49
#: AppTools/ToolImage.py:252 AppTools/ToolImage.py:273 AppTools/ToolNCC.py:96
#: AppTools/ToolNCC.py:558 AppTools/ToolNCC.py:1300 AppTools/ToolPaint.py:501
#: AppTools/ToolPaint.py:705 AppTools/ToolPanelize.py:116
#: AppTools/ToolPanelize.py:210 AppTools/ToolPanelize.py:385
#: AppTools/ToolPanelize.py:402
msgid "Gerber"
msgstr "Gerber"

#: AppGUI/ObjectUI.py:457 AppTools/ToolNCC.py:86 AppTools/ToolPaint.py:79
msgid "Obj Type"
msgstr "Obj Type"

#: AppGUI/ObjectUI.py:459
msgid ""
"Specify the type of object to be excepted from isolation.\n"
"It can be of type: Gerber or Geometry.\n"
"What is selected here will dictate the kind\n"
"of objects that will populate the 'Object' combobox."
msgstr ""
"Specify the type of object to be excepted from isolation.\n"
"It can be of type: Gerber or Geometry.\n"
"What is selected here will dictate the kind\n"
"of objects that will populate the 'Object' combobox."

#: AppGUI/ObjectUI.py:472 AppGUI/ObjectUI.py:1324 AppGUI/ObjectUI.py:2158
#: AppGUI/preferences/tools/Tools2CalPrefGroupUI.py:48
#: AppTools/ToolCalibration.py:186 AppTools/ToolNCC.py:109
#: AppTools/ToolPaint.py:102 AppTools/ToolPanelize.py:98
#: AppTools/ToolQRCode.py:78
msgid "Object"
msgstr "Object"

#: AppGUI/ObjectUI.py:473
msgid "Object whose area will be removed from isolation geometry."
msgstr "Object whose area will be removed from isolation geometry."

#: AppGUI/ObjectUI.py:480 AppGUI/preferences/gerber/GerberOptPrefGroupUI.py:82
msgid "Scope"
msgstr "Scope"

#: AppGUI/ObjectUI.py:482 AppGUI/preferences/gerber/GerberOptPrefGroupUI.py:84
msgid ""
"Isolation scope. Choose what to isolate:\n"
"- 'All' -> Isolate all the polygons in the object\n"
"- 'Selection' -> Isolate a selection of polygons."
msgstr ""
"Isolation scope. Choose what to isolate:\n"
"- 'All' -> Isolate all the polygons in the object\n"
"- 'Selection' -> Isolate a selection of polygons."

#: AppGUI/ObjectUI.py:487
#: AppGUI/preferences/general/GeneralGUIPrefGroupUI.py:307
#: AppGUI/preferences/gerber/GerberOptPrefGroupUI.py:89
#: AppGUI/preferences/tools/ToolsNCCPrefGroupUI.py:311
#: AppGUI/preferences/tools/ToolsPaintPrefGroupUI.py:258
#: AppTools/ToolNCC.py:539 AppTools/ToolPaint.py:455
msgid "Selection"
msgstr "Selection"

#: AppGUI/ObjectUI.py:495
#: AppGUI/preferences/gerber/GerberAdvOptPrefGroupUI.py:122
msgid "Isolation Type"
msgstr "Isolation Type"

#: AppGUI/ObjectUI.py:497
#: AppGUI/preferences/gerber/GerberAdvOptPrefGroupUI.py:124
msgid ""
"Choose how the isolation will be executed:\n"
"- 'Full' -> complete isolation of polygons\n"
"- 'Ext' -> will isolate only on the outside\n"
"- 'Int' -> will isolate only on the inside\n"
"'Exterior' isolation is almost always possible\n"
"(with the right tool) but 'Interior'\n"
"isolation can be done only when there is an opening\n"
"inside of the polygon (e.g polygon is a 'doughnut' shape)."
msgstr ""
"Choose how the isolation will be executed:\n"
"- 'Full' -> complete isolation of polygons\n"
"- 'Ext' -> will isolate only on the outside\n"
"- 'Int' -> will isolate only on the inside\n"
"'Exterior' isolation is almost always possible\n"
"(with the right tool) but 'Interior'\n"
"isolation can be done only when there is an opening\n"
"inside of the polygon (e.g polygon is a 'doughnut' shape)."

#: AppGUI/ObjectUI.py:506
#: AppGUI/preferences/gerber/GerberAdvOptPrefGroupUI.py:133
#: AppGUI/preferences/gerber/GerberAdvOptPrefGroupUI.py:154
msgid "Full"
msgstr "Full"

#: AppGUI/ObjectUI.py:507
msgid "Ext"
msgstr "Ext"

#: AppGUI/ObjectUI.py:508
msgid "Int"
msgstr "Int"

#: AppGUI/ObjectUI.py:513
msgid "Generate Isolation Geometry"
msgstr "Generate Isolation Geometry"

#: AppGUI/ObjectUI.py:521
msgid ""
"Create a Geometry object with toolpaths to cut \n"
"isolation outside, inside or on both sides of the\n"
"object. For a Gerber object outside means outside\n"
"of the Gerber feature and inside means inside of\n"
"the Gerber feature, if possible at all. This means\n"
"that only if the Gerber feature has openings inside, they\n"
"will be isolated. If what is wanted is to cut isolation\n"
"inside the actual Gerber feature, use a negative tool\n"
"diameter above."
msgstr ""
"Create a Geometry object with toolpaths to cut \n"
"isolation outside, inside or on both sides of the\n"
"object. For a Gerber object outside means outside\n"
"of the Gerber feature and inside means inside of\n"
"the Gerber feature, if possible at all. This means\n"
"that only if the Gerber feature has openings inside, they\n"
"will be isolated. If what is wanted is to cut isolation\n"
"inside the actual Gerber feature, use a negative tool\n"
"diameter above."

#: AppGUI/ObjectUI.py:533
msgid "Buffer Solid Geometry"
msgstr "Buffer Solid Geometry"

#: AppGUI/ObjectUI.py:535
msgid ""
"This button is shown only when the Gerber file\n"
"is loaded without buffering.\n"
"Clicking this will create the buffered geometry\n"
"required for isolation."
msgstr ""
"This button is shown only when the Gerber file\n"
"is loaded without buffering.\n"
"Clicking this will create the buffered geometry\n"
"required for isolation."

#: AppGUI/ObjectUI.py:567
msgid "Clear N-copper"
msgstr "Clear N-copper"

#: AppGUI/ObjectUI.py:569 AppGUI/preferences/tools/ToolsNCCPrefGroupUI.py:33
msgid ""
"Create a Geometry object with\n"
"toolpaths to cut all non-copper regions."
msgstr ""
"Create a Geometry object with\n"
"toolpaths to cut all non-copper regions."

#: AppGUI/ObjectUI.py:576 AppGUI/ObjectUI.py:2289 AppTools/ToolNCC.py:599
msgid ""
"Create the Geometry Object\n"
"for non-copper routing."
msgstr ""
"Create the Geometry Object\n"
"for non-copper routing."

#: AppGUI/ObjectUI.py:589
msgid "Board cutout"
msgstr "Board cutout"

#: AppGUI/ObjectUI.py:591 AppGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:34
msgid ""
"Create toolpaths to cut around\n"
"the PCB and separate it from\n"
"the original board."
msgstr ""
"Create toolpaths to cut around\n"
"the PCB and separate it from\n"
"the original board."

#: AppGUI/ObjectUI.py:598
msgid ""
"Generate the geometry for\n"
"the board cutout."
msgstr ""
"Generate the geometry for\n"
"the board cutout."

#: AppGUI/ObjectUI.py:616 AppGUI/preferences/gerber/GerberOptPrefGroupUI.py:119
msgid "Non-copper regions"
msgstr "Non-copper regions"

#: AppGUI/ObjectUI.py:618 AppGUI/preferences/gerber/GerberOptPrefGroupUI.py:121
msgid ""
"Create polygons covering the\n"
"areas without copper on the PCB.\n"
"Equivalent to the inverse of this\n"
"object. Can be used to remove all\n"
"copper from a specified region."
msgstr ""
"Create polygons covering the\n"
"areas without copper on the PCB.\n"
"Equivalent to the inverse of this\n"
"object. Can be used to remove all\n"
"copper from a specified region."

#: AppGUI/ObjectUI.py:628 AppGUI/ObjectUI.py:669
#: AppGUI/preferences/gerber/GerberOptPrefGroupUI.py:133
#: AppGUI/preferences/gerber/GerberOptPrefGroupUI.py:166
msgid "Boundary Margin"
msgstr "Boundary Margin"

#: AppGUI/ObjectUI.py:630 AppGUI/preferences/gerber/GerberOptPrefGroupUI.py:135
msgid ""
"Specify the edge of the PCB\n"
"by drawing a box around all\n"
"objects with this minimum\n"
"distance."
msgstr ""
"Specify the edge of the PCB\n"
"by drawing a box around all\n"
"objects with this minimum\n"
"distance."

#: AppGUI/ObjectUI.py:645 AppGUI/ObjectUI.py:683
#: AppGUI/preferences/gerber/GerberOptPrefGroupUI.py:148
#: AppGUI/preferences/gerber/GerberOptPrefGroupUI.py:179
msgid "Rounded Geo"
msgstr "Rounded Geo"

#: AppGUI/ObjectUI.py:647 AppGUI/preferences/gerber/GerberOptPrefGroupUI.py:150
msgid "Resulting geometry will have rounded corners."
msgstr "Resulting geometry will have rounded corners."

#: AppGUI/ObjectUI.py:651 AppGUI/ObjectUI.py:692
#: AppTools/ToolSolderPaste.py:134
msgid "Generate Geo"
msgstr "Generate Geo"

#: AppGUI/ObjectUI.py:661 AppGUI/preferences/gerber/GerberOptPrefGroupUI.py:160
#: AppGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:137
#: AppTools/ToolPanelize.py:99 AppTools/ToolQRCode.py:192
msgid "Bounding Box"
msgstr "Bounding Box"

#: AppGUI/ObjectUI.py:663
msgid ""
"Create a geometry surrounding the Gerber object.\n"
"Square shape."
msgstr ""
"Create a geometry surrounding the Gerber object.\n"
"Square shape."

#: AppGUI/ObjectUI.py:671 AppGUI/preferences/gerber/GerberOptPrefGroupUI.py:168
msgid ""
"Distance of the edges of the box\n"
"to the nearest polygon."
msgstr ""
"Distance of the edges of the box\n"
"to the nearest polygon."

#: AppGUI/ObjectUI.py:685 AppGUI/preferences/gerber/GerberOptPrefGroupUI.py:181
msgid ""
"If the bounding box is \n"
"to have rounded corners\n"
"their radius is equal to\n"
"the margin."
msgstr ""
"If the bounding box is \n"
"to have rounded corners\n"
"their radius is equal to\n"
"the margin."

#: AppGUI/ObjectUI.py:694
msgid "Generate the Geometry object."
msgstr "Generate the Geometry object."

#: AppGUI/ObjectUI.py:721
msgid "Excellon Object"
msgstr "Excellon Object"

#: AppGUI/ObjectUI.py:733
msgid "Solid circles."
msgstr "Solid circles."

#: AppGUI/ObjectUI.py:781 AppGUI/ObjectUI.py:876 AppGUI/ObjectUI.py:2466
#: AppGUI/preferences/excellon/ExcellonOptPrefGroupUI.py:71
#: AppTools/ToolProperties.py:166
msgid "Drills"
msgstr "Drills"

#: AppGUI/ObjectUI.py:781 AppGUI/ObjectUI.py:877 AppGUI/ObjectUI.py:2466
#: AppGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:158
#: AppGUI/preferences/excellon/ExcellonOptPrefGroupUI.py:72
#: AppTools/ToolProperties.py:168
msgid "Slots"
msgstr "Slots"

#: AppGUI/ObjectUI.py:786
msgid ""
"This is the Tool Number.\n"
"When ToolChange is checked, on toolchange event this value\n"
"will be showed as a T1, T2 ... Tn in the Machine Code.\n"
"\n"
"Here the tools are selected for G-code generation."
msgstr ""
"This is the Tool Number.\n"
"When ToolChange is checked, on toolchange event this value\n"
"will be showed as a T1, T2 ... Tn in the Machine Code.\n"
"\n"
"Here the tools are selected for G-code generation."

#: AppGUI/ObjectUI.py:791 AppGUI/ObjectUI.py:1612 AppTools/ToolPaint.py:141
msgid ""
"Tool Diameter. It's value (in current FlatCAM units) \n"
"is the cut width into the material."
msgstr ""
"Tool Diameter. It's value (in current FlatCAM units) \n"
"is the cut width into the material."

#: AppGUI/ObjectUI.py:794
msgid ""
"The number of Drill holes. Holes that are drilled with\n"
"a drill bit."
msgstr ""
"The number of Drill holes. Holes that are drilled with\n"
"a drill bit."

#: AppGUI/ObjectUI.py:797
msgid ""
"The number of Slot holes. Holes that are created by\n"
"milling them with an endmill bit."
msgstr ""
"The number of Slot holes. Holes that are created by\n"
"milling them with an endmill bit."

#: AppGUI/ObjectUI.py:800
msgid ""
"Toggle display of the drills for the current tool.\n"
"This does not select the tools for G-code generation."
msgstr ""
"Toggle display of the drills for the current tool.\n"
"This does not select the tools for G-code generation."

#: AppGUI/ObjectUI.py:818 AppGUI/ObjectUI.py:1764
#: AppObjects/FlatCAMExcellon.py:527 AppObjects/FlatCAMExcellon.py:805
#: AppObjects/FlatCAMExcellon.py:821 AppObjects/FlatCAMExcellon.py:825
#: AppObjects/FlatCAMGeometry.py:322 AppObjects/FlatCAMGeometry.py:816
#: AppObjects/FlatCAMGeometry.py:852 AppTools/ToolNCC.py:331
#: AppTools/ToolNCC.py:797 AppTools/ToolNCC.py:811 AppTools/ToolNCC.py:1196
#: AppTools/ToolPaint.py:313 AppTools/ToolPaint.py:766
#: AppTools/ToolPaint.py:778 AppTools/ToolPaint.py:1170
msgid "Parameters for"
msgstr "Parameters for"

#: AppGUI/ObjectUI.py:821 AppGUI/ObjectUI.py:1767 AppTools/ToolNCC.py:334
#: AppTools/ToolPaint.py:316
msgid ""
"The data used for creating GCode.\n"
"Each tool store it's own set of such data."
msgstr ""
"The data used for creating GCode.\n"
"Each tool store it's own set of such data."

#: AppGUI/ObjectUI.py:847
#: AppGUI/preferences/excellon/ExcellonOptPrefGroupUI.py:48
msgid ""
"Operation type:\n"
"- Drilling -> will drill the drills/slots associated with this tool\n"
"- Milling -> will mill the drills/slots"
msgstr ""
"Operation type:\n"
"- Drilling -> will drill the drills/slots associated with this tool\n"
"- Milling -> will mill the drills/slots"

#: AppGUI/ObjectUI.py:853
#: AppGUI/preferences/excellon/ExcellonOptPrefGroupUI.py:54
msgid "Drilling"
msgstr "Drilling"

#: AppGUI/ObjectUI.py:854
#: AppGUI/preferences/excellon/ExcellonOptPrefGroupUI.py:55
msgid "Milling"
msgstr "Milling"

#: AppGUI/ObjectUI.py:869
#: AppGUI/preferences/excellon/ExcellonOptPrefGroupUI.py:64
msgid ""
"Milling type:\n"
"- Drills -> will mill the drills associated with this tool\n"
"- Slots -> will mill the slots associated with this tool\n"
"- Both -> will mill both drills and mills or whatever is available"
msgstr ""
"Milling type:\n"
"- Drills -> will mill the drills associated with this tool\n"
"- Slots -> will mill the slots associated with this tool\n"
"- Both -> will mill both drills and mills or whatever is available"

#: AppGUI/ObjectUI.py:878
#: AppGUI/preferences/excellon/ExcellonOptPrefGroupUI.py:73
#: AppGUI/preferences/tools/ToolsFilmPrefGroupUI.py:210
#: AppTools/ToolFilm.py:241
msgid "Both"
msgstr "Both"

#: AppGUI/ObjectUI.py:886
#: AppGUI/preferences/excellon/ExcellonOptPrefGroupUI.py:80
msgid "Milling Diameter"
msgstr "Milling Diameter"

#: AppGUI/ObjectUI.py:888
#: AppGUI/preferences/excellon/ExcellonOptPrefGroupUI.py:82
msgid "The diameter of the tool who will do the milling"
msgstr "The diameter of the tool who will do the milling"

#: AppGUI/ObjectUI.py:902
#: AppGUI/preferences/excellon/ExcellonOptPrefGroupUI.py:95
msgid ""
"Drill depth (negative)\n"
"below the copper surface."
msgstr ""
"Drill depth (negative)\n"
"below the copper surface."

#: AppGUI/ObjectUI.py:921 AppGUI/ObjectUI.py:1826
#: AppGUI/preferences/excellon/ExcellonOptPrefGroupUI.py:113
#: AppGUI/preferences/geometry/GeometryOptPrefGroupUI.py:68
#: AppGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:79
#: AppTools/ToolCutOut.py:159
msgid "Multi-Depth"
msgstr "Multi-Depth"

#: AppGUI/ObjectUI.py:924 AppGUI/ObjectUI.py:1829
#: AppGUI/preferences/excellon/ExcellonOptPrefGroupUI.py:116
#: AppGUI/preferences/geometry/GeometryOptPrefGroupUI.py:71
#: AppGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:82
#: AppTools/ToolCutOut.py:162
msgid ""
"Use multiple passes to limit\n"
"the cut depth in each pass. Will\n"
"cut multiple times until Cut Z is\n"
"reached."
msgstr ""
"Use multiple passes to limit\n"
"the cut depth in each pass. Will\n"
"cut multiple times until Cut Z is\n"
"reached."

#: AppGUI/ObjectUI.py:937 AppGUI/ObjectUI.py:1843
#: AppGUI/preferences/excellon/ExcellonOptPrefGroupUI.py:128
#: AppGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:94
#: AppTools/ToolCutOut.py:176
msgid "Depth of each pass (positive)."
msgstr "Depth of each pass (positive)."

#: AppGUI/ObjectUI.py:948
#: AppGUI/preferences/excellon/ExcellonOptPrefGroupUI.py:136
msgid ""
"Tool height when travelling\n"
"across the XY plane."
msgstr ""
"Tool height when travelling\n"
"across the XY plane."

#: AppGUI/ObjectUI.py:969 AppGUI/ObjectUI.py:1873
#: AppGUI/preferences/geometry/GeometryOptPrefGroupUI.py:187
msgid ""
"Cutting speed in the XY\n"
"plane in units per minute"
msgstr ""
"Cutting speed in the XY\n"
"plane in units per minute"

#: AppGUI/ObjectUI.py:984
#: AppGUI/preferences/excellon/ExcellonOptPrefGroupUI.py:209
msgid ""
"Tool speed while drilling\n"
"(in units per minute).\n"
"So called 'Plunge' feedrate.\n"
"This is for linear move G01."
msgstr ""
"Tool speed while drilling\n"
"(in units per minute).\n"
"So called 'Plunge' feedrate.\n"
"This is for linear move G01."

#: AppGUI/ObjectUI.py:999 AppGUI/ObjectUI.py:1900
#: AppGUI/preferences/excellon/ExcellonAdvOptPrefGroupUI.py:80
#: AppGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:64
msgid "Feedrate Rapids"
msgstr "Feedrate Rapids"

#: AppGUI/ObjectUI.py:1001
#: AppGUI/preferences/excellon/ExcellonAdvOptPrefGroupUI.py:82
msgid ""
"Tool speed while drilling\n"
"(in units per minute).\n"
"This is for the rapid move G00.\n"
"It is useful only for Marlin,\n"
"ignore for any other cases."
msgstr ""
"Tool speed while drilling\n"
"(in units per minute).\n"
"This is for the rapid move G00.\n"
"It is useful only for Marlin,\n"
"ignore for any other cases."

#: AppGUI/ObjectUI.py:1021 AppGUI/ObjectUI.py:1920
#: AppGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:82
msgid "Re-cut"
msgstr "Re-cut"

#: AppGUI/ObjectUI.py:1023 AppGUI/ObjectUI.py:1036 AppGUI/ObjectUI.py:1922
#: AppGUI/ObjectUI.py:1934
#: AppGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:84
#: AppGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:96
msgid ""
"In order to remove possible\n"
"copper leftovers where first cut\n"
"meet with last cut, we generate an\n"
"extended cut over the first cut section."
msgstr ""
"In order to remove possible\n"
"copper leftovers where first cut\n"
"meet with last cut, we generate an\n"
"extended cut over the first cut section."

#: AppGUI/ObjectUI.py:1049 AppGUI/ObjectUI.py:1943
#: AppGUI/preferences/geometry/GeometryOptPrefGroupUI.py:216
#: AppObjects/FlatCAMExcellon.py:1412 AppObjects/FlatCAMGeometry.py:1676
msgid "Spindle speed"
msgstr "Spindle speed"

#: AppGUI/ObjectUI.py:1051
#: AppGUI/preferences/excellon/ExcellonOptPrefGroupUI.py:224
msgid ""
"Speed of the spindle\n"
"in RPM (optional)"
msgstr ""
"Speed of the spindle\n"
"in RPM (optional)"

#: AppGUI/ObjectUI.py:1066 AppGUI/ObjectUI.py:1962
#: AppGUI/preferences/excellon/ExcellonOptPrefGroupUI.py:238
#: AppGUI/preferences/geometry/GeometryOptPrefGroupUI.py:234
msgid ""
"Pause to allow the spindle to reach its\n"
"speed before cutting."
msgstr ""
"Pause to allow the spindle to reach its\n"
"speed before cutting."

#: AppGUI/ObjectUI.py:1077 AppGUI/ObjectUI.py:1972
#: AppGUI/preferences/excellon/ExcellonOptPrefGroupUI.py:246
#: AppGUI/preferences/geometry/GeometryOptPrefGroupUI.py:239
msgid "Number of time units for spindle to dwell."
msgstr "Number of time units for spindle to dwell."

#: AppGUI/ObjectUI.py:1087
#: AppGUI/preferences/excellon/ExcellonAdvOptPrefGroupUI.py:46
msgid "Offset Z"
msgstr "Offset Z"

#: AppGUI/ObjectUI.py:1089
#: AppGUI/preferences/excellon/ExcellonAdvOptPrefGroupUI.py:48
msgid ""
"Some drill bits (the larger ones) need to drill deeper\n"
"to create the desired exit hole diameter due of the tip shape.\n"
"The value here can compensate the Cut Z parameter."
msgstr ""
"Some drill bits (the larger ones) need to drill deeper\n"
"to create the desired exit hole diameter due of the tip shape.\n"
"The value here can compensate the Cut Z parameter."

#: AppGUI/ObjectUI.py:1149 AppGUI/ObjectUI.py:2026 AppTools/ToolNCC.py:492
#: AppTools/ToolPaint.py:422
msgid "Apply parameters to all tools"
msgstr "Apply parameters to all tools"

#: AppGUI/ObjectUI.py:1151 AppGUI/ObjectUI.py:2028 AppTools/ToolNCC.py:494
#: AppTools/ToolPaint.py:424
msgid ""
"The parameters in the current form will be applied\n"
"on all the tools from the Tool Table."
msgstr ""
"The parameters in the current form will be applied\n"
"on all the tools from the Tool Table."

#: AppGUI/ObjectUI.py:1162 AppGUI/ObjectUI.py:2039 AppTools/ToolNCC.py:505
#: AppTools/ToolPaint.py:435
msgid "Common Parameters"
msgstr "Common Parameters"

#: AppGUI/ObjectUI.py:1164 AppGUI/ObjectUI.py:2041 AppTools/ToolNCC.py:507
#: AppTools/ToolPaint.py:437
msgid "Parameters that are common for all tools."
msgstr "Parameters that are common for all tools."

#: AppGUI/ObjectUI.py:1169 AppGUI/ObjectUI.py:2046
msgid "Tool change Z"
msgstr "Tool change Z"

#: AppGUI/ObjectUI.py:1171
#: AppGUI/preferences/excellon/ExcellonOptPrefGroupUI.py:154
msgid ""
"Include tool-change sequence\n"
"in G-Code (Pause for tool change)."
msgstr ""
"Include tool-change sequence\n"
"in G-Code (Pause for tool change)."

#: AppGUI/ObjectUI.py:1178 AppGUI/ObjectUI.py:2057
#: AppGUI/preferences/excellon/ExcellonOptPrefGroupUI.py:162
#: AppGUI/preferences/geometry/GeometryOptPrefGroupUI.py:134
msgid ""
"Z-axis position (height) for\n"
"tool change."
msgstr ""
"Z-axis position (height) for\n"
"tool change."

#: AppGUI/ObjectUI.py:1195
#: AppGUI/preferences/excellon/ExcellonAdvOptPrefGroupUI.py:71
msgid ""
"Height of the tool just after start.\n"
"Delete the value if you don't need this feature."
msgstr ""
"Height of the tool just after start.\n"
"Delete the value if you don't need this feature."

#: AppGUI/ObjectUI.py:1204 AppGUI/ObjectUI.py:2085
#: AppGUI/preferences/excellon/ExcellonOptPrefGroupUI.py:178
#: AppGUI/preferences/geometry/GeometryOptPrefGroupUI.py:153
msgid "End move Z"
msgstr "End move Z"

#: AppGUI/ObjectUI.py:1206 AppGUI/ObjectUI.py:2087
#: AppGUI/preferences/excellon/ExcellonOptPrefGroupUI.py:180
#: AppGUI/preferences/geometry/GeometryOptPrefGroupUI.py:155
msgid ""
"Height of the tool after\n"
"the last move at the end of the job."
msgstr ""
"Height of the tool after\n"
"the last move at the end of the job."

#: AppGUI/ObjectUI.py:1223 AppGUI/ObjectUI.py:2104
#: AppGUI/preferences/excellon/ExcellonOptPrefGroupUI.py:195
#: AppGUI/preferences/geometry/GeometryOptPrefGroupUI.py:173
msgid "End move X,Y"
msgstr "End move X,Y"

#: AppGUI/ObjectUI.py:1225 AppGUI/ObjectUI.py:2106
#: AppGUI/preferences/excellon/ExcellonOptPrefGroupUI.py:197
#: AppGUI/preferences/geometry/GeometryOptPrefGroupUI.py:175
msgid ""
"End move X,Y position. In format (x,y).\n"
"If no value is entered then there is no move\n"
"on X,Y plane at the end of the job."
msgstr ""
"End move X,Y position. In format (x,y).\n"
"If no value is entered then there is no move\n"
"on X,Y plane at the end of the job."

#: AppGUI/ObjectUI.py:1235 AppGUI/ObjectUI.py:1980
#: AppGUI/preferences/excellon/ExcellonAdvOptPrefGroupUI.py:96
#: AppGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:105
msgid "Probe Z depth"
msgstr "Probe Z depth"

#: AppGUI/ObjectUI.py:1237 AppGUI/ObjectUI.py:1982
#: AppGUI/preferences/excellon/ExcellonAdvOptPrefGroupUI.py:98
#: AppGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:107
msgid ""
"The maximum depth that the probe is allowed\n"
"to probe. Negative value, in current units."
msgstr ""
"The maximum depth that the probe is allowed\n"
"to probe. Negative value, in current units."

#: AppGUI/ObjectUI.py:1254 AppGUI/ObjectUI.py:1997
#: AppGUI/preferences/excellon/ExcellonAdvOptPrefGroupUI.py:109
#: AppGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:120
msgid "Feedrate Probe"
msgstr "Feedrate Probe"

#: AppGUI/ObjectUI.py:1256 AppGUI/ObjectUI.py:1999
#: AppGUI/preferences/excellon/ExcellonAdvOptPrefGroupUI.py:111
#: AppGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:122
msgid "The feedrate used while the probe is probing."
msgstr "The feedrate used while the probe is probing."

#: AppGUI/ObjectUI.py:1272
msgid "Preprocessor E"
msgstr "Preprocessor E"

#: AppGUI/ObjectUI.py:1274
msgid ""
"The preprocessor JSON file that dictates\n"
"Gcode output for Excellon Objects."
msgstr ""
"The preprocessor JSON file that dictates\n"
"Gcode output for Excellon Objects."

#: AppGUI/ObjectUI.py:1284
msgid "Preprocessor G"
msgstr "Preprocessor G"

#: AppGUI/ObjectUI.py:1286
msgid ""
"The preprocessor JSON file that dictates\n"
"Gcode output for Geometry (Milling) Objects."
msgstr ""
"The preprocessor JSON file that dictates\n"
"Gcode output for Geometry (Milling) Objects."

#: AppGUI/ObjectUI.py:1300 AppGUI/ObjectUI.py:2134
#| msgid "Exclusion areas"
msgid "Add exclusion areas"
msgstr "Add exclusion areas"

#: AppGUI/ObjectUI.py:1303 AppGUI/ObjectUI.py:2137
#: AppGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:204
msgid ""
"Include exclusion areas.\n"
"In those areas the travel of the tools\n"
"is forbidden."
msgstr ""
"Include exclusion areas.\n"
"In those areas the travel of the tools\n"
"is forbidden."

#: AppGUI/ObjectUI.py:1324 AppGUI/ObjectUI.py:1343 AppGUI/ObjectUI.py:2158
#: AppGUI/ObjectUI.py:2177
#: AppGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:224
msgid "Strategy"
msgstr "Strategy"

#: AppGUI/ObjectUI.py:1324 AppGUI/ObjectUI.py:1355 AppGUI/ObjectUI.py:2158
#: AppGUI/ObjectUI.py:2189
#: AppGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:236
msgid "Over Z"
msgstr "Over Z"

#: AppGUI/ObjectUI.py:1326 AppGUI/ObjectUI.py:2160
msgid "This is the Area ID."
msgstr "This is the Area ID."

#: AppGUI/ObjectUI.py:1328 AppGUI/ObjectUI.py:2162
msgid "Type of the object where the exclusion area was added."
msgstr "Type of the object where the exclusion area was added."

#: AppGUI/ObjectUI.py:1330 AppGUI/ObjectUI.py:2164
msgid ""
"The strategy used for exclusion area. Go around the exclusion areas or over "
"it."
msgstr ""
"The strategy used for exclusion area. Go around the exclusion areas or over "
"it."

#: AppGUI/ObjectUI.py:1332 AppGUI/ObjectUI.py:2166
msgid ""
"If the strategy is to go over the area then this is the height at which the "
"tool will go to avoid the exclusion area."
msgstr ""
"If the strategy is to go over the area then this is the height at which the "
"tool will go to avoid the exclusion area."

#: AppGUI/ObjectUI.py:1344 AppGUI/ObjectUI.py:2178
#: AppGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:225
msgid ""
"The strategy followed when encountering an exclusion area.\n"
"Can be:\n"
"- Over -> when encountering the area, the tool will go to a set height\n"
"- Around -> will avoid the exclusion area by going around the area"
msgstr ""
"The strategy followed when encountering an exclusion area.\n"
"Can be:\n"
"- Over -> when encountering the area, the tool will go to a set height\n"
"- Around -> will avoid the exclusion area by going around the area"

#: AppGUI/ObjectUI.py:1348 AppGUI/ObjectUI.py:2182
#: AppGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:229
msgid "Over"
msgstr "Over"

#: AppGUI/ObjectUI.py:1349 AppGUI/ObjectUI.py:2183
#: AppGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:230
msgid "Around"
msgstr "Around"

#: AppGUI/ObjectUI.py:1356 AppGUI/ObjectUI.py:2190
#: AppGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:237
msgid ""
"The height Z to which the tool will rise in order to avoid\n"
"an interdiction area."
msgstr ""
"The height Z to which the tool will rise in order to avoid\n"
"an interdiction area."

#: AppGUI/ObjectUI.py:1366 AppGUI/ObjectUI.py:2200
#| msgid "Add area"
msgid "Add area:"
msgstr "Add area:"

#: AppGUI/ObjectUI.py:1367 AppGUI/ObjectUI.py:2201
msgid "Add an Exclusion Area."
msgstr "Add an Exclusion Area."

#: AppGUI/ObjectUI.py:1373 AppGUI/ObjectUI.py:2207
#: AppGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:214
#: AppGUI/preferences/tools/ToolsNCCPrefGroupUI.py:324
#: AppGUI/preferences/tools/ToolsPaintPrefGroupUI.py:288
#: AppTools/ToolNCC.py:580 AppTools/ToolPaint.py:523
msgid "The kind of selection shape used for area selection."
msgstr "The kind of selection shape used for area selection."

#: AppGUI/ObjectUI.py:1383 AppGUI/ObjectUI.py:2217
#: AppGUI/preferences/utilities/AutoCompletePrefGroupUI.py:32
#: AppGUI/preferences/utilities/FAExcPrefGroupUI.py:42
#: AppGUI/preferences/utilities/FAGcoPrefGroupUI.py:32
#: AppGUI/preferences/utilities/FAGrbPrefGroupUI.py:32
msgid "Delete All"
msgstr "Delete All"

#: AppGUI/ObjectUI.py:1384 AppGUI/ObjectUI.py:2218
msgid "Delete all exclusion areas."
msgstr "Delete all exclusion areas."

#: AppGUI/ObjectUI.py:1387 AppGUI/ObjectUI.py:2221
#| msgid "Delete Object"
msgid "Delete Selected"
msgstr "Delete Selected"

#: AppGUI/ObjectUI.py:1388 AppGUI/ObjectUI.py:2222
#| msgid "Delete all exclusion areas."
msgid "Delete all exclusion areas that are selected in the table."
msgstr "Delete all exclusion areas that are selected in the table."

#: AppGUI/ObjectUI.py:1412 AppGUI/ObjectUI.py:2238
msgid ""
"Add / Select at least one tool in the tool-table.\n"
"Click the # header to select all, or Ctrl + LMB\n"
"for custom selection of tools."
msgstr ""
"Add / Select at least one tool in the tool-table.\n"
"Click the # header to select all, or Ctrl + LMB\n"
"for custom selection of tools."

#: AppGUI/ObjectUI.py:1420 AppGUI/ObjectUI.py:2245
msgid "Generate CNCJob object"
msgstr "Generate CNCJob object"

#: AppGUI/ObjectUI.py:1422
msgid ""
"Generate the CNC Job.\n"
"If milling then an additional Geometry object will be created"
msgstr ""
"Generate the CNC Job.\n"
"If milling then an additional Geometry object will be created"

#: AppGUI/ObjectUI.py:1439
msgid "Milling Geometry"
msgstr "Milling Geometry"

#: AppGUI/ObjectUI.py:1441
msgid ""
"Create Geometry for milling holes.\n"
"Select from the Tools Table above the hole dias to be\n"
"milled. Use the # column to make the selection."
msgstr ""
"Create Geometry for milling holes.\n"
"Select from the Tools Table above the hole dias to be\n"
"milled. Use the # column to make the selection."

#: AppGUI/ObjectUI.py:1449
#: AppGUI/preferences/excellon/ExcellonOptPrefGroupUI.py:296
#: AppGUI/preferences/gerber/GerberOptPrefGroupUI.py:45
msgid "Diameter of the cutting tool."
msgstr "Diameter of the cutting tool."

#: AppGUI/ObjectUI.py:1459
msgid "Mill Drills"
msgstr "Mill Drills"

#: AppGUI/ObjectUI.py:1461
msgid ""
"Create the Geometry Object\n"
"for milling DRILLS toolpaths."
msgstr ""
"Create the Geometry Object\n"
"for milling DRILLS toolpaths."

#: AppGUI/ObjectUI.py:1479
msgid "Mill Slots"
msgstr "Mill Slots"

#: AppGUI/ObjectUI.py:1481
msgid ""
"Create the Geometry Object\n"
"for milling SLOTS toolpaths."
msgstr ""
"Create the Geometry Object\n"
"for milling SLOTS toolpaths."

#: AppGUI/ObjectUI.py:1523 AppTools/ToolCutOut.py:319
msgid "Geometry Object"
msgstr "Geometry Object"

#: AppGUI/ObjectUI.py:1569
msgid ""
"Tools in this Geometry object used for cutting.\n"
"The 'Offset' entry will set an offset for the cut.\n"
"'Offset' can be inside, outside, on path (none) and custom.\n"
"'Type' entry is only informative and it allow to know the \n"
"intent of using the current tool. \n"
"It can be Rough(ing), Finish(ing) or Iso(lation).\n"
"The 'Tool type'(TT) can be circular with 1 to 4 teeths(C1..C4),\n"
"ball(B), or V-Shaped(V). \n"
"When V-shaped is selected the 'Type' entry is automatically \n"
"set to Isolation, the CutZ parameter in the UI form is\n"
"grayed out and Cut Z is automatically calculated from the newly \n"
"showed UI form entries named V-Tip Dia and V-Tip Angle."
msgstr ""
"Tools in this Geometry object used for cutting.\n"
"The 'Offset' entry will set an offset for the cut.\n"
"'Offset' can be inside, outside, on path (none) and custom.\n"
"'Type' entry is only informative and it allow to know the \n"
"intent of using the current tool. \n"
"It can be Rough(ing), Finish(ing) or Iso(lation).\n"
"The 'Tool type'(TT) can be circular with 1 to 4 teeths(C1..C4),\n"
"ball(B), or V-Shaped(V). \n"
"When V-shaped is selected the 'Type' entry is automatically \n"
"set to Isolation, the CutZ parameter in the UI form is\n"
"grayed out and Cut Z is automatically calculated from the newly \n"
"showed UI form entries named V-Tip Dia and V-Tip Angle."

#: AppGUI/ObjectUI.py:1586 AppGUI/ObjectUI.py:2443
#: AppGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:40
msgid "Plot Object"
msgstr "Plot Object"

#: AppGUI/ObjectUI.py:1599 AppGUI/ObjectUI.py:2456 AppGUI/ObjectUI.py:2466
#: AppGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:138
#: AppTools/ToolCopperThieving.py:221
msgid "Dia"
msgstr "Dia"

#: AppGUI/ObjectUI.py:1599 AppGUI/ObjectUI.py:2456 AppTools/ToolNCC.py:132
#: AppTools/ToolPaint.py:127
msgid "TT"
msgstr "TT"

#: AppGUI/ObjectUI.py:1606
msgid ""
"This is the Tool Number.\n"
"When ToolChange is checked, on toolchange event this value\n"
"will be showed as a T1, T2 ... Tn"
msgstr ""
"This is the Tool Number.\n"
"When ToolChange is checked, on toolchange event this value\n"
"will be showed as a T1, T2 ... Tn"

#: AppGUI/ObjectUI.py:1617
msgid ""
"The value for the Offset can be:\n"
"- Path -> There is no offset, the tool cut will be done through the geometry "
"line.\n"
"- In(side) -> The tool cut will follow the geometry inside. It will create a "
"'pocket'.\n"
"- Out(side) -> The tool cut will follow the geometry line on the outside."
msgstr ""
"The value for the Offset can be:\n"
"- Path -> There is no offset, the tool cut will be done through the geometry "
"line.\n"
"- In(side) -> The tool cut will follow the geometry inside. It will create a "
"'pocket'.\n"
"- Out(side) -> The tool cut will follow the geometry line on the outside."

#: AppGUI/ObjectUI.py:1624
msgid ""
"The (Operation) Type has only informative value. Usually the UI form "
"values \n"
"are choose based on the operation type and this will serve as a reminder.\n"
"Can be 'Roughing', 'Finishing' or 'Isolation'.\n"
"For Roughing we may choose a lower Feedrate and multiDepth cut.\n"
"For Finishing we may choose a higher Feedrate, without multiDepth.\n"
"For Isolation we need a lower Feedrate as it use a milling bit with a fine "
"tip."
msgstr ""
"The (Operation) Type has only informative value. Usually the UI form "
"values \n"
"are choose based on the operation type and this will serve as a reminder.\n"
"Can be 'Roughing', 'Finishing' or 'Isolation'.\n"
"For Roughing we may choose a lower Feedrate and multiDepth cut.\n"
"For Finishing we may choose a higher Feedrate, without multiDepth.\n"
"For Isolation we need a lower Feedrate as it use a milling bit with a fine "
"tip."

#: AppGUI/ObjectUI.py:1633
msgid ""
"The Tool Type (TT) can be:\n"
"- Circular with 1 ... 4 teeth -> it is informative only. Being circular the "
"cut width in material\n"
"is exactly the tool diameter.\n"
"- Ball -> informative only and make reference to the Ball type endmill.\n"
"- V-Shape -> it will disable Z-Cut parameter in the UI form and enable two "
"additional UI form\n"
"fields: V-Tip Dia and V-Tip Angle. Adjusting those two values will adjust "
"the Z-Cut parameter such\n"
"as the cut width into material will be equal with the value in the Tool "
"Diameter column of this table.\n"
"Choosing the V-Shape Tool Type automatically will select the Operation Type "
"as Isolation."
msgstr ""
"The Tool Type (TT) can be:\n"
"- Circular with 1 ... 4 teeth -> it is informative only. Being circular the "
"cut width in material\n"
"is exactly the tool diameter.\n"
"- Ball -> informative only and make reference to the Ball type endmill.\n"
"- V-Shape -> it will disable Z-Cut parameter in the UI form and enable two "
"additional UI form\n"
"fields: V-Tip Dia and V-Tip Angle. Adjusting those two values will adjust "
"the Z-Cut parameter such\n"
"as the cut width into material will be equal with the value in the Tool "
"Diameter column of this table.\n"
"Choosing the V-Shape Tool Type automatically will select the Operation Type "
"as Isolation."

#: AppGUI/ObjectUI.py:1645
msgid ""
"Plot column. It is visible only for MultiGeo geometries, meaning geometries "
"that holds the geometry\n"
"data into the tools. For those geometries, deleting the tool will delete the "
"geometry data also,\n"
"so be WARNED. From the checkboxes on each row it can be enabled/disabled the "
"plot on canvas\n"
"for the corresponding tool."
msgstr ""
"Plot column. It is visible only for MultiGeo geometries, meaning geometries "
"that holds the geometry\n"
"data into the tools. For those geometries, deleting the tool will delete the "
"geometry data also,\n"
"so be WARNED. From the checkboxes on each row it can be enabled/disabled the "
"plot on canvas\n"
"for the corresponding tool."

#: AppGUI/ObjectUI.py:1663
msgid ""
"The value to offset the cut when \n"
"the Offset type selected is 'Offset'.\n"
"The value can be positive for 'outside'\n"
"cut and negative for 'inside' cut."
msgstr ""
"The value to offset the cut when \n"
"the Offset type selected is 'Offset'.\n"
"The value can be positive for 'outside'\n"
"cut and negative for 'inside' cut."

#: AppGUI/ObjectUI.py:1682 AppTools/ToolNCC.py:209 AppTools/ToolNCC.py:923
#: AppTools/ToolPaint.py:191 AppTools/ToolPaint.py:848
#: AppTools/ToolSolderPaste.py:559
msgid "New Tool"
msgstr "New Tool"

#: AppGUI/ObjectUI.py:1699
msgid ""
"Add a new tool to the Tool Table\n"
"with the specified diameter."
msgstr ""
"Add a new tool to the Tool Table\n"
"with the specified diameter."

#: AppGUI/ObjectUI.py:1704 AppTools/ToolNCC.py:300 AppTools/ToolNCC.py:634
#: AppTools/ToolPaint.py:282 AppTools/ToolPaint.py:678
msgid "Add from DB"
msgstr "Add from DB"

#: AppGUI/ObjectUI.py:1706 AppTools/ToolNCC.py:302 AppTools/ToolPaint.py:284
msgid ""
"Add a new tool to the Tool Table\n"
"from the Tool DataBase."
msgstr ""
"Add a new tool to the Tool Table\n"
"from the Tool DataBase."

#: AppGUI/ObjectUI.py:1721
msgid ""
"Copy a selection of tools in the Tool Table\n"
"by first selecting a row in the Tool Table."
msgstr ""
"Copy a selection of tools in the Tool Table\n"
"by first selecting a row in the Tool Table."

#: AppGUI/ObjectUI.py:1727
msgid ""
"Delete a selection of tools in the Tool Table\n"
"by first selecting a row in the Tool Table."
msgstr ""
"Delete a selection of tools in the Tool Table\n"
"by first selecting a row in the Tool Table."

#: AppGUI/ObjectUI.py:1854
#: AppGUI/preferences/geometry/GeometryOptPrefGroupUI.py:103
msgid ""
"Height of the tool when\n"
"moving without cutting."
msgstr ""
"Height of the tool when\n"
"moving without cutting."

#: AppGUI/ObjectUI.py:1887
#: AppGUI/preferences/geometry/GeometryOptPrefGroupUI.py:202
msgid ""
"Cutting speed in the XY\n"
"plane in units per minute.\n"
"It is called also Plunge."
msgstr ""
"Cutting speed in the XY\n"
"plane in units per minute.\n"
"It is called also Plunge."

#: AppGUI/ObjectUI.py:1902
#: AppGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:66
msgid ""
"Cutting speed in the XY plane\n"
"(in units per minute).\n"
"This is for the rapid move G00.\n"
"It is useful only for Marlin,\n"
"ignore for any other cases."
msgstr ""
"Cutting speed in the XY plane\n"
"(in units per minute).\n"
"This is for the rapid move G00.\n"
"It is useful only for Marlin,\n"
"ignore for any other cases."

#: AppGUI/ObjectUI.py:1946
#: AppGUI/preferences/geometry/GeometryOptPrefGroupUI.py:219
msgid ""
"Speed of the spindle in RPM (optional).\n"
"If LASER preprocessor is used,\n"
"this value is the power of laser."
msgstr ""
"Speed of the spindle in RPM (optional).\n"
"If LASER preprocessor is used,\n"
"this value is the power of laser."

#: AppGUI/ObjectUI.py:2049
#: AppGUI/preferences/geometry/GeometryOptPrefGroupUI.py:124
msgid ""
"Include tool-change sequence\n"
"in the Machine Code (Pause for tool change)."
msgstr ""
"Include tool-change sequence\n"
"in the Machine Code (Pause for tool change)."

#: AppGUI/ObjectUI.py:2118
#: AppGUI/preferences/geometry/GeometryOptPrefGroupUI.py:256
msgid ""
"The Preprocessor file that dictates\n"
"the Machine Code (like GCode, RML, HPGL) output."
msgstr ""
"The Preprocessor file that dictates\n"
"the Machine Code (like GCode, RML, HPGL) output."

#: AppGUI/ObjectUI.py:2247 Common.py:405 Common.py:520 Common.py:573
msgid "Generate the CNC Job object."
msgstr "Generate the CNC Job object."

#: AppGUI/ObjectUI.py:2264
msgid "Launch Paint Tool in Tools Tab."
msgstr "Launch Paint Tool in Tools Tab."

#: AppGUI/ObjectUI.py:2272 AppGUI/preferences/tools/ToolsPaintPrefGroupUI.py:35
msgid ""
"Creates tool paths to cover the\n"
"whole area of a polygon (remove\n"
"all copper). You will be asked\n"
"to click on the desired polygon."
msgstr ""
"Creates tool paths to cover the\n"
"whole area of a polygon (remove\n"
"all copper). You will be asked\n"
"to click on the desired polygon."

#: AppGUI/ObjectUI.py:2327
msgid "CNC Job Object"
msgstr "CNC Job Object"

#: AppGUI/ObjectUI.py:2338 AppGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:45
msgid "Plot kind"
msgstr "Plot kind"

#: AppGUI/ObjectUI.py:2341 AppGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:47
msgid ""
"This selects the kind of geometries on the canvas to plot.\n"
"Those can be either of type 'Travel' which means the moves\n"
"above the work piece or it can be of type 'Cut',\n"
"which means the moves that cut into the material."
msgstr ""
"This selects the kind of geometries on the canvas to plot.\n"
"Those can be either of type 'Travel' which means the moves\n"
"above the work piece or it can be of type 'Cut',\n"
"which means the moves that cut into the material."

#: AppGUI/ObjectUI.py:2350 AppGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:55
msgid "Travel"
msgstr "Travel"

#: AppGUI/ObjectUI.py:2354 AppGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:64
msgid "Display Annotation"
msgstr "Display Annotation"

#: AppGUI/ObjectUI.py:2356 AppGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:66
msgid ""
"This selects if to display text annotation on the plot.\n"
"When checked it will display numbers in order for each end\n"
"of a travel line."
msgstr ""
"This selects if to display text annotation on the plot.\n"
"When checked it will display numbers in order for each end\n"
"of a travel line."

#: AppGUI/ObjectUI.py:2371
msgid "Travelled dist."
msgstr "Travelled dist."

#: AppGUI/ObjectUI.py:2373 AppGUI/ObjectUI.py:2378
msgid ""
"This is the total travelled distance on X-Y plane.\n"
"In current units."
msgstr ""
"This is the total travelled distance on X-Y plane.\n"
"In current units."

#: AppGUI/ObjectUI.py:2383
msgid "Estimated time"
msgstr "Estimated time"

#: AppGUI/ObjectUI.py:2385 AppGUI/ObjectUI.py:2390
msgid ""
"This is the estimated time to do the routing/drilling,\n"
"without the time spent in ToolChange events."
msgstr ""
"This is the estimated time to do the routing/drilling,\n"
"without the time spent in ToolChange events."

#: AppGUI/ObjectUI.py:2425
msgid "CNC Tools Table"
msgstr "CNC Tools Table"

#: AppGUI/ObjectUI.py:2428
msgid ""
"Tools in this CNCJob object used for cutting.\n"
"The tool diameter is used for plotting on canvas.\n"
"The 'Offset' entry will set an offset for the cut.\n"
"'Offset' can be inside, outside, on path (none) and custom.\n"
"'Type' entry is only informative and it allow to know the \n"
"intent of using the current tool. \n"
"It can be Rough(ing), Finish(ing) or Iso(lation).\n"
"The 'Tool type'(TT) can be circular with 1 to 4 teeths(C1..C4),\n"
"ball(B), or V-Shaped(V)."
msgstr ""
"Tools in this CNCJob object used for cutting.\n"
"The tool diameter is used for plotting on canvas.\n"
"The 'Offset' entry will set an offset for the cut.\n"
"'Offset' can be inside, outside, on path (none) and custom.\n"
"'Type' entry is only informative and it allow to know the \n"
"intent of using the current tool. \n"
"It can be Rough(ing), Finish(ing) or Iso(lation).\n"
"The 'Tool type'(TT) can be circular with 1 to 4 teeths(C1..C4),\n"
"ball(B), or V-Shaped(V)."

#: AppGUI/ObjectUI.py:2456 AppGUI/ObjectUI.py:2467
msgid "P"
msgstr "P"

#: AppGUI/ObjectUI.py:2477
msgid "Update Plot"
msgstr "Update Plot"

#: AppGUI/ObjectUI.py:2479
msgid "Update the plot."
msgstr "Update the plot."

#: AppGUI/ObjectUI.py:2486
#: AppGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:30
msgid "Export CNC Code"
msgstr "Export CNC Code"

#: AppGUI/ObjectUI.py:2488
#: AppGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:32
#: AppGUI/preferences/cncjob/CNCJobOptPrefGroupUI.py:33
msgid ""
"Export and save G-Code to\n"
"make this object to a file."
msgstr ""
"Export and save G-Code to\n"
"make this object to a file."

#: AppGUI/ObjectUI.py:2494
msgid "Prepend to CNC Code"
msgstr "Prepend to CNC Code"

#: AppGUI/ObjectUI.py:2496 AppGUI/ObjectUI.py:2503
#: AppGUI/preferences/cncjob/CNCJobOptPrefGroupUI.py:49
msgid ""
"Type here any G-Code commands you would\n"
"like to add at the beginning of the G-Code file."
msgstr ""
"Type here any G-Code commands you would\n"
"like to add at the beginning of the G-Code file."

#: AppGUI/ObjectUI.py:2509
msgid "Append to CNC Code"
msgstr "Append to CNC Code"

#: AppGUI/ObjectUI.py:2511 AppGUI/ObjectUI.py:2519
#: AppGUI/preferences/cncjob/CNCJobOptPrefGroupUI.py:65
msgid ""
"Type here any G-Code commands you would\n"
"like to append to the generated file.\n"
"I.e.: M2 (End of program)"
msgstr ""
"Type here any G-Code commands you would\n"
"like to append to the generated file.\n"
"I.e.: M2 (End of program)"

#: AppGUI/ObjectUI.py:2533
#: AppGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:38
msgid "Toolchange G-Code"
msgstr "Toolchange G-Code"

#: AppGUI/ObjectUI.py:2536
#: AppGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:41
msgid ""
"Type here any G-Code commands you would\n"
"like to be executed when Toolchange event is encountered.\n"
"This will constitute a Custom Toolchange GCode,\n"
"or a Toolchange Macro.\n"
"The FlatCAM variables are surrounded by '%' symbol.\n"
"\n"
"WARNING: it can be used only with a preprocessor file\n"
"that has 'toolchange_custom' in it's name and this is built\n"
"having as template the 'Toolchange Custom' posprocessor file."
msgstr ""
"Type here any G-Code commands you would\n"
"like to be executed when Toolchange event is encountered.\n"
"This will constitute a Custom Toolchange GCode,\n"
"or a Toolchange Macro.\n"
"The FlatCAM variables are surrounded by '%' symbol.\n"
"\n"
"WARNING: it can be used only with a preprocessor file\n"
"that has 'toolchange_custom' in it's name and this is built\n"
"having as template the 'Toolchange Custom' posprocessor file."

#: AppGUI/ObjectUI.py:2551
msgid ""
"Type here any G-Code commands you would\n"
"like to be executed when Toolchange event is encountered.\n"
"This will constitute a Custom Toolchange GCode,\n"
"or a Toolchange Macro.\n"
"The FlatCAM variables are surrounded by '%' symbol.\n"
"WARNING: it can be used only with a preprocessor file\n"
"that has 'toolchange_custom' in it's name."
msgstr ""
"Type here any G-Code commands you would\n"
"like to be executed when Toolchange event is encountered.\n"
"This will constitute a Custom Toolchange GCode,\n"
"or a Toolchange Macro.\n"
"The FlatCAM variables are surrounded by '%' symbol.\n"
"WARNING: it can be used only with a preprocessor file\n"
"that has 'toolchange_custom' in it's name."

#: AppGUI/ObjectUI.py:2566
#: AppGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:80
msgid "Use Toolchange Macro"
msgstr "Use Toolchange Macro"

#: AppGUI/ObjectUI.py:2568
#: AppGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:82
msgid ""
"Check this box if you want to use\n"
"a Custom Toolchange GCode (macro)."
msgstr ""
"Check this box if you want to use\n"
"a Custom Toolchange GCode (macro)."

#: AppGUI/ObjectUI.py:2576
#: AppGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:94
msgid ""
"A list of the FlatCAM variables that can be used\n"
"in the Toolchange event.\n"
"They have to be surrounded by the '%' symbol"
msgstr ""
"A list of the FlatCAM variables that can be used\n"
"in the Toolchange event.\n"
"They have to be surrounded by the '%' symbol"

#: AppGUI/ObjectUI.py:2583
#: AppGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:101
#: AppGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:30
#: AppGUI/preferences/geometry/GeometryEditorPrefGroupUI.py:31
#: AppGUI/preferences/gerber/GerberEditorPrefGroupUI.py:31
#: AppGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:37
#: AppGUI/preferences/tools/Tools2CalPrefGroupUI.py:36
#: AppGUI/preferences/tools/Tools2EDrillsPrefGroupUI.py:36
#: AppGUI/preferences/tools/Tools2FiducialsPrefGroupUI.py:36
#: AppGUI/preferences/tools/Tools2InvertPrefGroupUI.py:31
#: AppGUI/preferences/tools/Tools2OptimalPrefGroupUI.py:31
#: AppGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:36
#: AppGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:31
#: AppGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:30
#: AppGUI/preferences/tools/Tools2sidedPrefGroupUI.py:31
#: AppGUI/preferences/tools/ToolsCornersPrefGroupUI.py:35
#: AppGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:32
#: AppGUI/preferences/tools/ToolsFilmPrefGroupUI.py:31
#: AppGUI/preferences/tools/ToolsNCCPrefGroupUI.py:31
#: AppGUI/preferences/tools/ToolsPanelizePrefGroupUI.py:31
#: AppGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:31
#: AppGUI/preferences/tools/ToolsSubPrefGroupUI.py:31
#: AppGUI/preferences/tools/ToolsTransformPrefGroupUI.py:31
#: AppTools/ToolCopperThieving.py:89 AppTools/ToolCorners.py:106
#: AppTools/ToolFiducials.py:149 AppTools/ToolInvertGerber.py:82
msgid "Parameters"
msgstr "Parameters"

#: AppGUI/ObjectUI.py:2586
#: AppGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:106
msgid "FlatCAM CNC parameters"
msgstr "FlatCAM CNC parameters"

#: AppGUI/ObjectUI.py:2587
#: AppGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:111
msgid "tool number"
msgstr "tool number"

#: AppGUI/ObjectUI.py:2588
#: AppGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:112
msgid "tool diameter"
msgstr "tool diameter"

#: AppGUI/ObjectUI.py:2589
#: AppGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:113
msgid "for Excellon, total number of drills"
msgstr "for Excellon, total number of drills"

#: AppGUI/ObjectUI.py:2591
#: AppGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:115
msgid "X coord for Toolchange"
msgstr "X coord for Toolchange"

#: AppGUI/ObjectUI.py:2592
#: AppGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:116
msgid "Y coord for Toolchange"
msgstr "Y coord for Toolchange"

#: AppGUI/ObjectUI.py:2593
#: AppGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:118
msgid "Z coord for Toolchange"
msgstr "Z coord for Toolchange"

#: AppGUI/ObjectUI.py:2594
msgid "depth where to cut"
msgstr "depth where to cut"

#: AppGUI/ObjectUI.py:2595
msgid "height where to travel"
msgstr "height where to travel"

#: AppGUI/ObjectUI.py:2596
#: AppGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:121
msgid "the step value for multidepth cut"
msgstr "the step value for multidepth cut"

#: AppGUI/ObjectUI.py:2598
#: AppGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:123
msgid "the value for the spindle speed"
msgstr "the value for the spindle speed"

#: AppGUI/ObjectUI.py:2600
msgid "time to dwell to allow the spindle to reach it's set RPM"
msgstr "time to dwell to allow the spindle to reach it's set RPM"

#: AppGUI/ObjectUI.py:2616
msgid "View CNC Code"
msgstr "View CNC Code"

#: AppGUI/ObjectUI.py:2618
msgid ""
"Opens TAB to view/modify/print G-Code\n"
"file."
msgstr ""
"Opens TAB to view/modify/print G-Code\n"
"file."

#: AppGUI/ObjectUI.py:2623
msgid "Save CNC Code"
msgstr "Save CNC Code"

#: AppGUI/ObjectUI.py:2625
msgid ""
"Opens dialog to save G-Code\n"
"file."
msgstr ""
"Opens dialog to save G-Code\n"
"file."

#: AppGUI/ObjectUI.py:2659
msgid "Script Object"
msgstr "Script Object"

#: AppGUI/ObjectUI.py:2679 AppGUI/ObjectUI.py:2753
msgid "Auto Completer"
msgstr "Auto Completer"

#: AppGUI/ObjectUI.py:2681
msgid "This selects if the auto completer is enabled in the Script Editor."
msgstr "This selects if the auto completer is enabled in the Script Editor."

#: AppGUI/ObjectUI.py:2726
msgid "Document Object"
msgstr "Document Object"

#: AppGUI/ObjectUI.py:2755
msgid "This selects if the auto completer is enabled in the Document Editor."
msgstr "This selects if the auto completer is enabled in the Document Editor."

#: AppGUI/ObjectUI.py:2773
msgid "Font Type"
msgstr "Font Type"

#: AppGUI/ObjectUI.py:2790
#: AppGUI/preferences/general/GeneralAPPSetGroupUI.py:197
msgid "Font Size"
msgstr "Font Size"

#: AppGUI/ObjectUI.py:2826
msgid "Alignment"
msgstr "Alignment"

#: AppGUI/ObjectUI.py:2831
msgid "Align Left"
msgstr "Align Left"

#: AppGUI/ObjectUI.py:2836 App_Main.py:4937
msgid "Center"
msgstr "Center"

#: AppGUI/ObjectUI.py:2841
msgid "Align Right"
msgstr "Align Right"

#: AppGUI/ObjectUI.py:2846
msgid "Justify"
msgstr "Justify"

#: AppGUI/ObjectUI.py:2853
msgid "Font Color"
msgstr "Font Color"

#: AppGUI/ObjectUI.py:2855
msgid "Set the font color for the selected text"
msgstr "Set the font color for the selected text"

#: AppGUI/ObjectUI.py:2869
msgid "Selection Color"
msgstr "Selection Color"

#: AppGUI/ObjectUI.py:2871
msgid "Set the selection color when doing text selection."
msgstr "Set the selection color when doing text selection."

#: AppGUI/ObjectUI.py:2885
msgid "Tab Size"
msgstr "Tab Size"

#: AppGUI/ObjectUI.py:2887
msgid "Set the tab size. In pixels. Default value is 80 pixels."
msgstr "Set the tab size. In pixels. Default value is 80 pixels."

#: AppGUI/PlotCanvasLegacy.py:1456
msgid ""
"Could not annotate due of a difference between the number of text elements "
"and the number of text positions."
msgstr ""
"Could not annotate due of a difference between the number of text elements "
"and the number of text positions."

#: AppGUI/preferences/PreferencesUIManager.py:911
#: AppGUI/preferences/PreferencesUIManager.py:1002
#: AppGUI/preferences/PreferencesUIManager.py:1026
#: AppGUI/preferences/PreferencesUIManager.py:1132 App_Main.py:5357
msgid "Preferences"
msgstr "Preferences"

#: AppGUI/preferences/PreferencesUIManager.py:917
msgid "Preferences applied."
msgstr "Preferences applied."

#: AppGUI/preferences/PreferencesUIManager.py:937
#| msgid "Are you sure you want to delete the GUI Settings? \n"
msgid "Are you sure you want to continue?"
msgstr "Are you sure you want to continue?"

#: AppGUI/preferences/PreferencesUIManager.py:938
#| msgid "Application started ..."
msgid "Application restart"
msgstr "Application restart"

#: AppGUI/preferences/PreferencesUIManager.py:1031
msgid "Preferences closed without saving."
msgstr "Preferences closed without saving."

#: AppGUI/preferences/PreferencesUIManager.py:1043
msgid "Preferences default values are restored."
msgstr "Preferences default values are restored."

#: AppGUI/preferences/PreferencesUIManager.py:1075 App_Main.py:2498
#: App_Main.py:2566
msgid "Failed to write defaults to file."
msgstr "Failed to write defaults to file."

#: AppGUI/preferences/PreferencesUIManager.py:1079
#: AppGUI/preferences/PreferencesUIManager.py:1188
msgid "Preferences saved."
msgstr "Preferences saved."

#: AppGUI/preferences/PreferencesUIManager.py:1129
msgid "Preferences edited but not saved."
msgstr "Preferences edited but not saved."

#: AppGUI/preferences/PreferencesUIManager.py:1174
msgid ""
"One or more values are changed.\n"
"Do you want to save the Preferences?"
msgstr ""
"One or more values are changed.\n"
"Do you want to save the Preferences?"

#: AppGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:27
msgid "CNC Job Adv. Options"
msgstr "CNC Job Adv. Options"

#: AppGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:64
msgid ""
"Type here any G-Code commands you would like to be executed when Toolchange "
"event is encountered.\n"
"This will constitute a Custom Toolchange GCode, or a Toolchange Macro.\n"
"The FlatCAM variables are surrounded by '%' symbol.\n"
"WARNING: it can be used only with a preprocessor file that has "
"'toolchange_custom' in it's name."
msgstr ""
"Type here any G-Code commands you would like to be executed when Toolchange "
"event is encountered.\n"
"This will constitute a Custom Toolchange GCode, or a Toolchange Macro.\n"
"The FlatCAM variables are surrounded by '%' symbol.\n"
"WARNING: it can be used only with a preprocessor file that has "
"'toolchange_custom' in it's name."

#: AppGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:119
msgid "Z depth for the cut"
msgstr "Z depth for the cut"

#: AppGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:120
msgid "Z height for travel"
msgstr "Z height for travel"

#: AppGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:126
msgid "dwelltime = time to dwell to allow the spindle to reach it's set RPM"
msgstr "dwelltime = time to dwell to allow the spindle to reach it's set RPM"

#: AppGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:145
msgid "Annotation Size"
msgstr "Annotation Size"

#: AppGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:147
msgid "The font size of the annotation text. In pixels."
msgstr "The font size of the annotation text. In pixels."

#: AppGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:157
msgid "Annotation Color"
msgstr "Annotation Color"

#: AppGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:159
msgid "Set the font color for the annotation texts."
msgstr "Set the font color for the annotation texts."

#: AppGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:26
msgid "CNC Job General"
msgstr "CNC Job General"

#: AppGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:77
#: AppGUI/preferences/geometry/GeometryGenPrefGroupUI.py:47
#: AppGUI/preferences/gerber/GerberGenPrefGroupUI.py:59
#: AppGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:45
msgid "Circle Steps"
msgstr "Circle Steps"

#: AppGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:79
msgid ""
"The number of circle steps for <b>GCode</b> \n"
"circle and arc shapes linear approximation."
msgstr ""
"The number of circle steps for <b>GCode</b> \n"
"circle and arc shapes linear approximation."

#: AppGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:88
msgid "Travel dia"
msgstr "Travel dia"

#: AppGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:90
msgid ""
"The width of the travel lines to be\n"
"rendered in the plot."
msgstr ""
"The width of the travel lines to be\n"
"rendered in the plot."

#: AppGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:103
msgid "G-code Decimals"
msgstr "G-code Decimals"

#: AppGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:106
#: AppTools/ToolFiducials.py:74
msgid "Coordinates"
msgstr "Coordinates"

#: AppGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:108
msgid ""
"The number of decimals to be used for \n"
"the X, Y, Z coordinates in CNC code (GCODE, etc.)"
msgstr ""
"The number of decimals to be used for \n"
"the X, Y, Z coordinates in CNC code (GCODE, etc.)"

#: AppGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:119
#: AppTools/ToolProperties.py:519
msgid "Feedrate"
msgstr "Feedrate"

#: AppGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:121
msgid ""
"The number of decimals to be used for \n"
"the Feedrate parameter in CNC code (GCODE, etc.)"
msgstr ""
"The number of decimals to be used for \n"
"the Feedrate parameter in CNC code (GCODE, etc.)"

#: AppGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:132
msgid "Coordinates type"
msgstr "Coordinates type"

#: AppGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:134
msgid ""
"The type of coordinates to be used in Gcode.\n"
"Can be:\n"
"- Absolute G90 -> the reference is the origin x=0, y=0\n"
"- Incremental G91 -> the reference is the previous position"
msgstr ""
"The type of coordinates to be used in Gcode.\n"
"Can be:\n"
"- Absolute G90 -> the reference is the origin x=0, y=0\n"
"- Incremental G91 -> the reference is the previous position"

#: AppGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:140
msgid "Absolute G90"
msgstr "Absolute G90"

#: AppGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:141
msgid "Incremental G91"
msgstr "Incremental G91"

#: AppGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:151
msgid "Force Windows style line-ending"
msgstr "Force Windows style line-ending"

#: AppGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:153
msgid ""
"When checked will force a Windows style line-ending\n"
"(\\r\\n) on non-Windows OS's."
msgstr ""
"When checked will force a Windows style line-ending\n"
"(\\r\\n) on non-Windows OS's."

#: AppGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:165
msgid "Travel Line Color"
msgstr "Travel Line Color"

#: AppGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:169
#: AppGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:235
#: AppGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:262
#: AppGUI/preferences/general/GeneralGUIPrefGroupUI.py:154
#: AppGUI/preferences/general/GeneralGUIPrefGroupUI.py:220
#: AppGUI/preferences/geometry/GeometryGenPrefGroupUI.py:84
#: AppGUI/preferences/gerber/GerberGenPrefGroupUI.py:153
#: AppTools/ToolRulesCheck.py:186
msgid "Outline"
msgstr "Outline"

#: AppGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:171
msgid "Set the travel line color for plotted objects."
msgstr "Set the travel line color for plotted objects."

#: AppGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:186
#: AppGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:252
#: AppGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:279
#: AppGUI/preferences/general/GeneralGUIPrefGroupUI.py:170
#: AppGUI/preferences/general/GeneralGUIPrefGroupUI.py:237
#: AppGUI/preferences/gerber/GerberGenPrefGroupUI.py:170
msgid "Fill"
msgstr "Fill"

#: AppGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:188
#: AppGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:254
#: AppGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:281
#: AppGUI/preferences/gerber/GerberGenPrefGroupUI.py:172
msgid ""
"Set the fill color for plotted objects.\n"
"First 6 digits are the color and the last 2\n"
"digits are for alpha (transparency) level."
msgstr ""
"Set the fill color for plotted objects.\n"
"First 6 digits are the color and the last 2\n"
"digits are for alpha (transparency) level."

#: AppGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:205
#: AppGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:298
#: AppGUI/preferences/general/GeneralGUIPrefGroupUI.py:190
#: AppGUI/preferences/general/GeneralGUIPrefGroupUI.py:257
#: AppGUI/preferences/gerber/GerberGenPrefGroupUI.py:189
msgid "Alpha"
msgstr "Alpha"

#: AppGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:207
#: AppGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:300
#: AppGUI/preferences/gerber/GerberGenPrefGroupUI.py:191
msgid "Set the fill transparency for plotted objects."
msgstr "Set the fill transparency for plotted objects."

#: AppGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:231
msgid "CNCJob Object Color"
msgstr "CNCJob Object Color"

#: AppGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:237
msgid "Set the color for plotted objects."
msgstr "Set the color for plotted objects."

#: AppGUI/preferences/cncjob/CNCJobOptPrefGroupUI.py:27
msgid "CNC Job Options"
msgstr "CNC Job Options"

#: AppGUI/preferences/cncjob/CNCJobOptPrefGroupUI.py:31
msgid "Export G-Code"
msgstr "Export G-Code"

#: AppGUI/preferences/cncjob/CNCJobOptPrefGroupUI.py:47
msgid "Prepend to G-Code"
msgstr "Prepend to G-Code"

#: AppGUI/preferences/cncjob/CNCJobOptPrefGroupUI.py:56
msgid ""
"Type here any G-Code commands you would like to add at the beginning of the "
"G-Code file."
msgstr ""
"Type here any G-Code commands you would like to add at the beginning of the "
"G-Code file."

#: AppGUI/preferences/cncjob/CNCJobOptPrefGroupUI.py:63
msgid "Append to G-Code"
msgstr "Append to G-Code"

#: AppGUI/preferences/cncjob/CNCJobOptPrefGroupUI.py:73
msgid ""
"Type here any G-Code commands you would like to append to the generated "
"file.\n"
"I.e.: M2 (End of program)"
msgstr ""
"Type here any G-Code commands you would like to append to the generated "
"file.\n"
"I.e.: M2 (End of program)"

#: AppGUI/preferences/excellon/ExcellonAdvOptPrefGroupUI.py:27
msgid "Excellon Adv. Options"
msgstr "Excellon Adv. Options"

#: AppGUI/preferences/excellon/ExcellonAdvOptPrefGroupUI.py:34
#: AppGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:33
#: AppGUI/preferences/gerber/GerberAdvOptPrefGroupUI.py:31
msgid "Advanced Options"
msgstr "Advanced Options"

#: AppGUI/preferences/excellon/ExcellonAdvOptPrefGroupUI.py:36
msgid ""
"A list of Excellon advanced parameters.\n"
"Those parameters are available only for\n"
"Advanced App. Level."
msgstr ""
"A list of Excellon advanced parameters.\n"
"Those parameters are available only for\n"
"Advanced App. Level."

#: AppGUI/preferences/excellon/ExcellonAdvOptPrefGroupUI.py:59
msgid "Toolchange X,Y"
msgstr "Toolchange X,Y"

#: AppGUI/preferences/excellon/ExcellonAdvOptPrefGroupUI.py:61
#: AppGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:47
msgid "Toolchange X,Y position."
msgstr "Toolchange X,Y position."

#: AppGUI/preferences/excellon/ExcellonAdvOptPrefGroupUI.py:121
#: AppGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:134
msgid "Spindle direction"
msgstr "Spindle direction"

#: AppGUI/preferences/excellon/ExcellonAdvOptPrefGroupUI.py:123
#: AppGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:136
msgid ""
"This sets the direction that the spindle is rotating.\n"
"It can be either:\n"
"- CW = clockwise or\n"
"- CCW = counter clockwise"
msgstr ""
"This sets the direction that the spindle is rotating.\n"
"It can be either:\n"
"- CW = clockwise or\n"
"- CCW = counter clockwise"

#: AppGUI/preferences/excellon/ExcellonAdvOptPrefGroupUI.py:134
#: AppGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:148
msgid "Fast Plunge"
msgstr "Fast Plunge"

#: AppGUI/preferences/excellon/ExcellonAdvOptPrefGroupUI.py:136
#: AppGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:150
msgid ""
"By checking this, the vertical move from\n"
"Z_Toolchange to Z_move is done with G0,\n"
"meaning the fastest speed available.\n"
"WARNING: the move is done at Toolchange X,Y coords."
msgstr ""
"By checking this, the vertical move from\n"
"Z_Toolchange to Z_move is done with G0,\n"
"meaning the fastest speed available.\n"
"WARNING: the move is done at Toolchange X,Y coords."

#: AppGUI/preferences/excellon/ExcellonAdvOptPrefGroupUI.py:143
msgid "Fast Retract"
msgstr "Fast Retract"

#: AppGUI/preferences/excellon/ExcellonAdvOptPrefGroupUI.py:145
msgid ""
"Exit hole strategy.\n"
" - When uncheked, while exiting the drilled hole the drill bit\n"
"will travel slow, with set feedrate (G1), up to zero depth and then\n"
"travel as fast as possible (G0) to the Z Move (travel height).\n"
" - When checked the travel from Z cut (cut depth) to Z_move\n"
"(travel height) is done as fast as possible (G0) in one move."
msgstr ""
"Exit hole strategy.\n"
" - When uncheked, while exiting the drilled hole the drill bit\n"
"will travel slow, with set feedrate (G1), up to zero depth and then\n"
"travel as fast as possible (G0) to the Z Move (travel height).\n"
" - When checked the travel from Z cut (cut depth) to Z_move\n"
"(travel height) is done as fast as possible (G0) in one move."

#: AppGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:32
msgid "A list of Excellon Editor parameters."
msgstr "A list of Excellon Editor parameters."

#: AppGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:40
#: AppGUI/preferences/geometry/GeometryEditorPrefGroupUI.py:41
#: AppGUI/preferences/gerber/GerberEditorPrefGroupUI.py:41
#: AppGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:194
msgid "Selection limit"
msgstr "Selection limit"

#: AppGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:42
msgid ""
"Set the number of selected Excellon geometry\n"
"items above which the utility geometry\n"
"becomes just a selection rectangle.\n"
"Increases the performance when moving a\n"
"large number of geometric elements."
msgstr ""
"Set the number of selected Excellon geometry\n"
"items above which the utility geometry\n"
"becomes just a selection rectangle.\n"
"Increases the performance when moving a\n"
"large number of geometric elements."

#: AppGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:55
#: AppGUI/preferences/tools/ToolsNCCPrefGroupUI.py:117
#: AppGUI/preferences/tools/ToolsPaintPrefGroupUI.py:123
msgid "New Dia"
msgstr "New Dia"

#: AppGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:80
msgid "Linear Drill Array"
msgstr "Linear Drill Array"

#: AppGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:84
#: AppGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:232
#: AppGUI/preferences/gerber/GerberEditorPrefGroupUI.py:120
msgid "Linear Direction"
msgstr "Linear Direction"

#: AppGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:126
msgid "Circular Drill Array"
msgstr "Circular Drill Array"

#: AppGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:130
#: AppGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:280
#: AppGUI/preferences/gerber/GerberEditorPrefGroupUI.py:164
msgid "Circular Direction"
msgstr "Circular Direction"

#: AppGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:132
#: AppGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:282
#: AppGUI/preferences/gerber/GerberEditorPrefGroupUI.py:166
msgid ""
"Direction for circular array.\n"
"Can be CW = clockwise or CCW = counter clockwise."
msgstr ""
"Direction for circular array.\n"
"Can be CW = clockwise or CCW = counter clockwise."

#: AppGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:143
#: AppGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:293
#: AppGUI/preferences/gerber/GerberEditorPrefGroupUI.py:177
msgid "Circular Angle"
msgstr "Circular Angle"

#: AppGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:196
msgid ""
"Angle at which the slot is placed.\n"
"The precision is of max 2 decimals.\n"
"Min value is: -359.99 degrees.\n"
"Max value is:  360.00 degrees."
msgstr ""
"Angle at which the slot is placed.\n"
"The precision is of max 2 decimals.\n"
"Min value is: -359.99 degrees.\n"
"Max value is:  360.00 degrees."

#: AppGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:215
msgid "Linear Slot Array"
msgstr "Linear Slot Array"

#: AppGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:276
msgid "Circular Slot Array"
msgstr "Circular Slot Array"

#: AppGUI/preferences/excellon/ExcellonExpPrefGroupUI.py:26
msgid "Excellon Export"
msgstr "Excellon Export"

#: AppGUI/preferences/excellon/ExcellonExpPrefGroupUI.py:30
#: AppGUI/preferences/gerber/GerberExpPrefGroupUI.py:31
msgid "Export Options"
msgstr "Export Options"

#: AppGUI/preferences/excellon/ExcellonExpPrefGroupUI.py:32
msgid ""
"The parameters set here are used in the file exported\n"
"when using the File -> Export -> Export Excellon menu entry."
msgstr ""
"The parameters set here are used in the file exported\n"
"when using the File -> Export -> Export Excellon menu entry."

#: AppGUI/preferences/excellon/ExcellonExpPrefGroupUI.py:41
#: AppGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:163
#: AppGUI/preferences/general/GeneralAppPrefGroupUI.py:39
#: AppGUI/preferences/gerber/GerberExpPrefGroupUI.py:42
#: AppGUI/preferences/gerber/GerberGenPrefGroupUI.py:82
#: AppTools/ToolDistance.py:56 AppTools/ToolDistanceMin.py:49
#: AppTools/ToolPcbWizard.py:127 AppTools/ToolProperties.py:154
msgid "Units"
msgstr "Units"

#: AppGUI/preferences/excellon/ExcellonExpPrefGroupUI.py:43
#: AppGUI/preferences/excellon/ExcellonExpPrefGroupUI.py:49
msgid "The units used in the Excellon file."
msgstr "The units used in the Excellon file."

#: AppGUI/preferences/excellon/ExcellonExpPrefGroupUI.py:46
#: AppGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:87
#: AppGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:173
#: AppGUI/preferences/gerber/GerberExpPrefGroupUI.py:47
#: AppGUI/preferences/gerber/GerberGenPrefGroupUI.py:87
#: AppTools/ToolCalculators.py:61 AppTools/ToolPcbWizard.py:125
msgid "INCH"
msgstr "INCH"

#: AppGUI/preferences/excellon/ExcellonExpPrefGroupUI.py:47
#: AppGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:174
#: AppGUI/preferences/general/GeneralAppPrefGroupUI.py:43
#: AppGUI/preferences/gerber/GerberExpPrefGroupUI.py:48
#: AppGUI/preferences/gerber/GerberGenPrefGroupUI.py:88
#: AppTools/ToolCalculators.py:62 AppTools/ToolPcbWizard.py:126
msgid "MM"
msgstr "MM"

#: AppGUI/preferences/excellon/ExcellonExpPrefGroupUI.py:55
#: AppGUI/preferences/gerber/GerberExpPrefGroupUI.py:56
msgid "Int/Decimals"
msgstr "Int/Decimals"

#: AppGUI/preferences/excellon/ExcellonExpPrefGroupUI.py:57
msgid ""
"The NC drill files, usually named Excellon files\n"
"are files that can be found in different formats.\n"
"Here we set the format used when the provided\n"
"coordinates are not using period."
msgstr ""
"The NC drill files, usually named Excellon files\n"
"are files that can be found in different formats.\n"
"Here we set the format used when the provided\n"
"coordinates are not using period."

#: AppGUI/preferences/excellon/ExcellonExpPrefGroupUI.py:69
#: AppGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:95
#: AppGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:124
msgid ""
"This numbers signify the number of digits in\n"
"the whole part of Excellon coordinates."
msgstr ""
"This numbers signify the number of digits in\n"
"the whole part of Excellon coordinates."

#: AppGUI/preferences/excellon/ExcellonExpPrefGroupUI.py:82
#: AppGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:108
#: AppGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:137
msgid ""
"This numbers signify the number of digits in\n"
"the decimal part of Excellon coordinates."
msgstr ""
"This numbers signify the number of digits in\n"
"the decimal part of Excellon coordinates."

#: AppGUI/preferences/excellon/ExcellonExpPrefGroupUI.py:91
msgid "Format"
msgstr "Format"

#: AppGUI/preferences/excellon/ExcellonExpPrefGroupUI.py:93
#: AppGUI/preferences/excellon/ExcellonExpPrefGroupUI.py:103
msgid ""
"Select the kind of coordinates format used.\n"
"Coordinates can be saved with decimal point or without.\n"
"When there is no decimal point, it is required to specify\n"
"the number of digits for integer part and the number of decimals.\n"
"Also it will have to be specified if LZ = leading zeros are kept\n"
"or TZ = trailing zeros are kept."
msgstr ""
"Select the kind of coordinates format used.\n"
"Coordinates can be saved with decimal point or without.\n"
"When there is no decimal point, it is required to specify\n"
"the number of digits for integer part and the number of decimals.\n"
"Also it will have to be specified if LZ = leading zeros are kept\n"
"or TZ = trailing zeros are kept."

#: AppGUI/preferences/excellon/ExcellonExpPrefGroupUI.py:100
msgid "Decimal"
msgstr "Decimal"

#: AppGUI/preferences/excellon/ExcellonExpPrefGroupUI.py:101
msgid "No-Decimal"
msgstr "No-Decimal"

#: AppGUI/preferences/excellon/ExcellonExpPrefGroupUI.py:114
#: AppGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:145
#: AppGUI/preferences/gerber/GerberExpPrefGroupUI.py:96
#: AppGUI/preferences/gerber/GerberGenPrefGroupUI.py:97
msgid "Zeros"
msgstr "Zeros"

#: AppGUI/preferences/excellon/ExcellonExpPrefGroupUI.py:117
msgid ""
"This sets the type of Excellon zeros.\n"
"If LZ then Leading Zeros are kept and\n"
"Trailing Zeros are removed.\n"
"If TZ is checked then Trailing Zeros are kept\n"
"and Leading Zeros are removed."
msgstr ""
"This sets the type of Excellon zeros.\n"
"If LZ then Leading Zeros are kept and\n"
"Trailing Zeros are removed.\n"
"If TZ is checked then Trailing Zeros are kept\n"
"and Leading Zeros are removed."

#: AppGUI/preferences/excellon/ExcellonExpPrefGroupUI.py:124
#: AppGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:158
#: AppGUI/preferences/gerber/GerberExpPrefGroupUI.py:106
#: AppGUI/preferences/gerber/GerberGenPrefGroupUI.py:107
#: AppTools/ToolPcbWizard.py:111
msgid "LZ"
msgstr "LZ"

#: AppGUI/preferences/excellon/ExcellonExpPrefGroupUI.py:125
#: AppGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:159
#: AppGUI/preferences/gerber/GerberExpPrefGroupUI.py:107
#: AppGUI/preferences/gerber/GerberGenPrefGroupUI.py:108
#: AppTools/ToolPcbWizard.py:112
msgid "TZ"
msgstr "TZ"

#: AppGUI/preferences/excellon/ExcellonExpPrefGroupUI.py:127
msgid ""
"This sets the default type of Excellon zeros.\n"
"If LZ then Leading Zeros are kept and\n"
"Trailing Zeros are removed.\n"
"If TZ is checked then Trailing Zeros are kept\n"
"and Leading Zeros are removed."
msgstr ""
"This sets the default type of Excellon zeros.\n"
"If LZ then Leading Zeros are kept and\n"
"Trailing Zeros are removed.\n"
"If TZ is checked then Trailing Zeros are kept\n"
"and Leading Zeros are removed."

#: AppGUI/preferences/excellon/ExcellonExpPrefGroupUI.py:137
msgid "Slot type"
msgstr "Slot type"

#: AppGUI/preferences/excellon/ExcellonExpPrefGroupUI.py:140
#: AppGUI/preferences/excellon/ExcellonExpPrefGroupUI.py:150
msgid ""
"This sets how the slots will be exported.\n"
"If ROUTED then the slots will be routed\n"
"using M15/M16 commands.\n"
"If DRILLED(G85) the slots will be exported\n"
"using the Drilled slot command (G85)."
msgstr ""
"This sets how the slots will be exported.\n"
"If ROUTED then the slots will be routed\n"
"using M15/M16 commands.\n"
"If DRILLED(G85) the slots will be exported\n"
"using the Drilled slot command (G85)."

#: AppGUI/preferences/excellon/ExcellonExpPrefGroupUI.py:147
msgid "Routed"
msgstr "Routed"

#: AppGUI/preferences/excellon/ExcellonExpPrefGroupUI.py:148
msgid "Drilled(G85)"
msgstr "Drilled(G85)"

#: AppGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:29
msgid "Excellon General"
msgstr "Excellon General"

#: AppGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:62
msgid "Excellon Format"
msgstr "Excellon Format"

#: AppGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:64
msgid ""
"The NC drill files, usually named Excellon files\n"
"are files that can be found in different formats.\n"
"Here we set the format used when the provided\n"
"coordinates are not using period.\n"
"\n"
"Possible presets:\n"
"\n"
"PROTEUS 3:3 MM LZ\n"
"DipTrace 5:2 MM TZ\n"
"DipTrace 4:3 MM LZ\n"
"\n"
"EAGLE 3:3 MM TZ\n"
"EAGLE 4:3 MM TZ\n"
"EAGLE 2:5 INCH TZ\n"
"EAGLE 3:5 INCH TZ\n"
"\n"
"ALTIUM 2:4 INCH LZ\n"
"Sprint Layout 2:4 INCH LZ\n"
"KiCAD 3:5 INCH TZ"
msgstr ""
"The NC drill files, usually named Excellon files\n"
"are files that can be found in different formats.\n"
"Here we set the format used when the provided\n"
"coordinates are not using period.\n"
"\n"
"Possible presets:\n"
"\n"
"PROTEUS 3:3 MM LZ\n"
"DipTrace 5:2 MM TZ\n"
"DipTrace 4:3 MM LZ\n"
"\n"
"EAGLE 3:3 MM TZ\n"
"EAGLE 4:3 MM TZ\n"
"EAGLE 2:5 INCH TZ\n"
"EAGLE 3:5 INCH TZ\n"
"\n"
"ALTIUM 2:4 INCH LZ\n"
"Sprint Layout 2:4 INCH LZ\n"
"KiCAD 3:5 INCH TZ"

#: AppGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:88
msgid "Default values for INCH are 2:4"
msgstr "Default values for INCH are 2:4"

#: AppGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:116
msgid "METRIC"
msgstr "METRIC"

#: AppGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:117
msgid "Default values for METRIC are 3:3"
msgstr "Default values for METRIC are 3:3"

#: AppGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:148
msgid ""
"This sets the type of Excellon zeros.\n"
"If LZ then Leading Zeros are kept and\n"
"Trailing Zeros are removed.\n"
"If TZ is checked then Trailing Zeros are kept\n"
"and Leading Zeros are removed.\n"
"\n"
"This is used when there is no information\n"
"stored in the Excellon file."
msgstr ""
"This sets the type of Excellon zeros.\n"
"If LZ then Leading Zeros are kept and\n"
"Trailing Zeros are removed.\n"
"If TZ is checked then Trailing Zeros are kept\n"
"and Leading Zeros are removed.\n"
"\n"
"This is used when there is no information\n"
"stored in the Excellon file."

#: AppGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:166
msgid ""
"This sets the default units of Excellon files.\n"
"If it is not detected in the parsed file the value here\n"
"will be used.Some Excellon files don't have an header\n"
"therefore this parameter will be used."
msgstr ""
"This sets the default units of Excellon files.\n"
"If it is not detected in the parsed file the value here\n"
"will be used.Some Excellon files don't have an header\n"
"therefore this parameter will be used."

#: AppGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:176
msgid ""
"This sets the units of Excellon files.\n"
"Some Excellon files don't have an header\n"
"therefore this parameter will be used."
msgstr ""
"This sets the units of Excellon files.\n"
"Some Excellon files don't have an header\n"
"therefore this parameter will be used."

#: AppGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:184
msgid "Update Export settings"
msgstr "Update Export settings"

#: AppGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:201
msgid "Excellon Optimization"
msgstr "Excellon Optimization"

#: AppGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:204
msgid "Algorithm:"
msgstr "Algorithm:"

#: AppGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:206
#: AppGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:222
msgid ""
"This sets the optimization type for the Excellon drill path.\n"
"If <<MetaHeuristic>> is checked then Google OR-Tools algorithm with\n"
"MetaHeuristic Guided Local Path is used. Default search time is 3sec.\n"
"If <<Basic>> is checked then Google OR-Tools Basic algorithm is used.\n"
"If <<TSA>> is checked then Travelling Salesman algorithm is used for\n"
"drill path optimization.\n"
"\n"
"If this control is disabled, then FlatCAM works in 32bit mode and it uses\n"
"Travelling Salesman algorithm for path optimization."
msgstr ""
"This sets the optimization type for the Excellon drill path.\n"
"If <<MetaHeuristic>> is checked then Google OR-Tools algorithm with\n"
"MetaHeuristic Guided Local Path is used. Default search time is 3sec.\n"
"If <<Basic>> is checked then Google OR-Tools Basic algorithm is used.\n"
"If <<TSA>> is checked then Travelling Salesman algorithm is used for\n"
"drill path optimization.\n"
"\n"
"If this control is disabled, then FlatCAM works in 32bit mode and it uses\n"
"Travelling Salesman algorithm for path optimization."

#: AppGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:217
msgid "MetaHeuristic"
msgstr "MetaHeuristic"

#: AppGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:218
#: AppGUI/preferences/general/GeneralAppPrefGroupUI.py:104
#: AppObjects/FlatCAMExcellon.py:683 AppObjects/FlatCAMGeometry.py:561
#: AppObjects/FlatCAMGerber.py:251
msgid "Basic"
msgstr "Basic"

#: AppGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:219
msgid "TSA"
msgstr "TSA"

#: AppGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:236
#: AppGUI/preferences/excellon/ExcellonOptPrefGroupUI.py:245
#: AppGUI/preferences/geometry/GeometryOptPrefGroupUI.py:237
msgid "Duration"
msgstr "Duration"

#: AppGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:239
msgid ""
"When OR-Tools Metaheuristic (MH) is enabled there is a\n"
"maximum threshold for how much time is spent doing the\n"
"path optimization. This max duration is set here.\n"
"In seconds."
msgstr ""
"When OR-Tools Metaheuristic (MH) is enabled there is a\n"
"maximum threshold for how much time is spent doing the\n"
"path optimization. This max duration is set here.\n"
"In seconds."

#: AppGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:258
msgid "Excellon Object Color"
msgstr "Excellon Object Color"

#: AppGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:264
#: AppGUI/preferences/geometry/GeometryGenPrefGroupUI.py:86
#: AppGUI/preferences/gerber/GerberGenPrefGroupUI.py:155
msgid "Set the line color for plotted objects."
msgstr "Set the line color for plotted objects."

#: AppGUI/preferences/excellon/ExcellonOptPrefGroupUI.py:29
msgid "Excellon Options"
msgstr "Excellon Options"

#: AppGUI/preferences/excellon/ExcellonOptPrefGroupUI.py:33
#: AppGUI/preferences/geometry/GeometryOptPrefGroupUI.py:34
msgid "Create CNC Job"
msgstr "Create CNC Job"

#: AppGUI/preferences/excellon/ExcellonOptPrefGroupUI.py:35
msgid ""
"Parameters used to create a CNC Job object\n"
"for this drill object."
msgstr ""
"Parameters used to create a CNC Job object\n"
"for this drill object."

#: AppGUI/preferences/excellon/ExcellonOptPrefGroupUI.py:152
#: AppGUI/preferences/geometry/GeometryOptPrefGroupUI.py:121
msgid "Tool change"
msgstr "Tool change"

#: AppGUI/preferences/excellon/ExcellonOptPrefGroupUI.py:236
#: AppGUI/preferences/geometry/GeometryOptPrefGroupUI.py:232
msgid "Enable Dwell"
msgstr "Enable Dwell"

#: AppGUI/preferences/excellon/ExcellonOptPrefGroupUI.py:259
msgid ""
"The preprocessor JSON file that dictates\n"
"Gcode output."
msgstr ""
"The preprocessor JSON file that dictates\n"
"Gcode output."

#: AppGUI/preferences/excellon/ExcellonOptPrefGroupUI.py:270
msgid "Gcode"
msgstr "Gcode"

#: AppGUI/preferences/excellon/ExcellonOptPrefGroupUI.py:272
msgid ""
"Choose what to use for GCode generation:\n"
"'Drills', 'Slots' or 'Both'.\n"
"When choosing 'Slots' or 'Both', slots will be\n"
"converted to drills."
msgstr ""
"Choose what to use for GCode generation:\n"
"'Drills', 'Slots' or 'Both'.\n"
"When choosing 'Slots' or 'Both', slots will be\n"
"converted to drills."

#: AppGUI/preferences/excellon/ExcellonOptPrefGroupUI.py:288
msgid "Mill Holes"
msgstr "Mill Holes"

#: AppGUI/preferences/excellon/ExcellonOptPrefGroupUI.py:290
msgid "Create Geometry for milling holes."
msgstr "Create Geometry for milling holes."

#: AppGUI/preferences/excellon/ExcellonOptPrefGroupUI.py:294
msgid "Drill Tool dia"
msgstr "Drill Tool dia"

#: AppGUI/preferences/excellon/ExcellonOptPrefGroupUI.py:305
msgid "Slot Tool dia"
msgstr "Slot Tool dia"

#: AppGUI/preferences/excellon/ExcellonOptPrefGroupUI.py:307
msgid ""
"Diameter of the cutting tool\n"
"when milling slots."
msgstr ""
"Diameter of the cutting tool\n"
"when milling slots."

#: AppGUI/preferences/general/GeneralAPPSetGroupUI.py:28
msgid "App Settings"
msgstr "App Settings"

#: AppGUI/preferences/general/GeneralAPPSetGroupUI.py:49
msgid "Grid Settings"
msgstr "Grid Settings"

#: AppGUI/preferences/general/GeneralAPPSetGroupUI.py:53
msgid "X value"
msgstr "X value"

#: AppGUI/preferences/general/GeneralAPPSetGroupUI.py:55
msgid "This is the Grid snap value on X axis."
msgstr "This is the Grid snap value on X axis."

#: AppGUI/preferences/general/GeneralAPPSetGroupUI.py:65
msgid "Y value"
msgstr "Y value"

#: AppGUI/preferences/general/GeneralAPPSetGroupUI.py:67
msgid "This is the Grid snap value on Y axis."
msgstr "This is the Grid snap value on Y axis."

#: AppGUI/preferences/general/GeneralAPPSetGroupUI.py:77
msgid "Snap Max"
msgstr "Snap Max"

#: AppGUI/preferences/general/GeneralAPPSetGroupUI.py:92
msgid "Workspace Settings"
msgstr "Workspace Settings"

#: AppGUI/preferences/general/GeneralAPPSetGroupUI.py:95
msgid "Active"
msgstr "Active"

#: AppGUI/preferences/general/GeneralAPPSetGroupUI.py:97
msgid ""
"Draw a delimiting rectangle on canvas.\n"
"The purpose is to illustrate the limits for our work."
msgstr ""
"Draw a delimiting rectangle on canvas.\n"
"The purpose is to illustrate the limits for our work."

#: AppGUI/preferences/general/GeneralAPPSetGroupUI.py:105
msgid ""
"Select the type of rectangle to be used on canvas,\n"
"as valid workspace."
msgstr ""
"Select the type of rectangle to be used on canvas,\n"
"as valid workspace."

#: AppGUI/preferences/general/GeneralAPPSetGroupUI.py:171
msgid "Orientation"
msgstr "Orientation"

#: AppGUI/preferences/general/GeneralAPPSetGroupUI.py:172
#: AppGUI/preferences/tools/ToolsFilmPrefGroupUI.py:239
#: AppTools/ToolFilm.py:405
msgid ""
"Can be:\n"
"- Portrait\n"
"- Landscape"
msgstr ""
"Can be:\n"
"- Portrait\n"
"- Landscape"

#: AppGUI/preferences/general/GeneralAPPSetGroupUI.py:176
#: AppGUI/preferences/tools/ToolsFilmPrefGroupUI.py:243
#: AppTools/ToolFilm.py:409
msgid "Portrait"
msgstr "Portrait"

#: AppGUI/preferences/general/GeneralAPPSetGroupUI.py:177
#: AppGUI/preferences/tools/ToolsFilmPrefGroupUI.py:244
#: AppTools/ToolFilm.py:410
msgid "Landscape"
msgstr "Landscape"

#: AppGUI/preferences/general/GeneralAPPSetGroupUI.py:201
msgid "Notebook"
msgstr "Notebook"

#: AppGUI/preferences/general/GeneralAPPSetGroupUI.py:203
#| msgid ""
#| "This sets the font size for the elements found in the Notebook.\n"
#| "The notebook is the collapsible area in the left side of the GUI,\n"
#| "and include the Project, Selected and Tool tabs."
msgid ""
"This sets the font size for the elements found in the Notebook.\n"
"The notebook is the collapsible area in the left side of the AppGUI,\n"
"and include the Project, Selected and Tool tabs."
msgstr ""
"This sets the font size for the elements found in the Notebook.\n"
"The notebook is the collapsible area in the left side of the AppGUI,\n"
"and include the Project, Selected and Tool tabs."

#: AppGUI/preferences/general/GeneralAPPSetGroupUI.py:222
msgid "Axis"
msgstr "Axis"

#: AppGUI/preferences/general/GeneralAPPSetGroupUI.py:224
msgid "This sets the font size for canvas axis."
msgstr "This sets the font size for canvas axis."

#: AppGUI/preferences/general/GeneralAPPSetGroupUI.py:241
msgid "Textbox"
msgstr "Textbox"

#: AppGUI/preferences/general/GeneralAPPSetGroupUI.py:243
#| msgid ""
#| "This sets the font size for the Textbox GUI\n"
#| "elements that are used in FlatCAM."
msgid ""
"This sets the font size for the Textbox AppGUI\n"
"elements that are used in FlatCAM."
msgstr ""
"This sets the font size for the Textbox AppGUI\n"
"elements that are used in FlatCAM."

#: AppGUI/preferences/general/GeneralAPPSetGroupUI.py:261
msgid "HUD"
msgstr "HUD"

#: AppGUI/preferences/general/GeneralAPPSetGroupUI.py:263
#| msgid "This sets the font size for canvas axis."
msgid "This sets the font size for the Heads Up Display."
msgstr "This sets the font size for the Heads Up Display."

#: AppGUI/preferences/general/GeneralAPPSetGroupUI.py:288
msgid "Mouse Settings"
msgstr "Mouse Settings"

#: AppGUI/preferences/general/GeneralAPPSetGroupUI.py:292
msgid "Cursor Shape"
msgstr "Cursor Shape"

#: AppGUI/preferences/general/GeneralAPPSetGroupUI.py:294
msgid ""
"Choose a mouse cursor shape.\n"
"- Small -> with a customizable size.\n"
"- Big -> Infinite lines"
msgstr ""
"Choose a mouse cursor shape.\n"
"- Small -> with a customizable size.\n"
"- Big -> Infinite lines"

#: AppGUI/preferences/general/GeneralAPPSetGroupUI.py:300
msgid "Small"
msgstr "Small"

#: AppGUI/preferences/general/GeneralAPPSetGroupUI.py:301
msgid "Big"
msgstr "Big"

#: AppGUI/preferences/general/GeneralAPPSetGroupUI.py:308
msgid "Cursor Size"
msgstr "Cursor Size"

#: AppGUI/preferences/general/GeneralAPPSetGroupUI.py:310
msgid "Set the size of the mouse cursor, in pixels."
msgstr "Set the size of the mouse cursor, in pixels."

#: AppGUI/preferences/general/GeneralAPPSetGroupUI.py:321
msgid "Cursor Width"
msgstr "Cursor Width"

#: AppGUI/preferences/general/GeneralAPPSetGroupUI.py:323
msgid "Set the line width of the mouse cursor, in pixels."
msgstr "Set the line width of the mouse cursor, in pixels."

#: AppGUI/preferences/general/GeneralAPPSetGroupUI.py:334
#: AppGUI/preferences/general/GeneralAPPSetGroupUI.py:341
msgid "Cursor Color"
msgstr "Cursor Color"

#: AppGUI/preferences/general/GeneralAPPSetGroupUI.py:336
msgid "Check this box to color mouse cursor."
msgstr "Check this box to color mouse cursor."

#: AppGUI/preferences/general/GeneralAPPSetGroupUI.py:343
msgid "Set the color of the mouse cursor."
msgstr "Set the color of the mouse cursor."

#: AppGUI/preferences/general/GeneralAPPSetGroupUI.py:366
msgid "Pan Button"
msgstr "Pan Button"

#: AppGUI/preferences/general/GeneralAPPSetGroupUI.py:368
msgid ""
"Select the mouse button to use for panning:\n"
"- MMB --> Middle Mouse Button\n"
"- RMB --> Right Mouse Button"
msgstr ""
"Select the mouse button to use for panning:\n"
"- MMB --> Middle Mouse Button\n"
"- RMB --> Right Mouse Button"

#: AppGUI/preferences/general/GeneralAPPSetGroupUI.py:372
msgid "MMB"
msgstr "MMB"

#: AppGUI/preferences/general/GeneralAPPSetGroupUI.py:373
msgid "RMB"
msgstr "RMB"

#: AppGUI/preferences/general/GeneralAPPSetGroupUI.py:379
msgid "Multiple Selection"
msgstr "Multiple Selection"

#: AppGUI/preferences/general/GeneralAPPSetGroupUI.py:381
msgid "Select the key used for multiple selection."
msgstr "Select the key used for multiple selection."

#: AppGUI/preferences/general/GeneralAPPSetGroupUI.py:383
msgid "CTRL"
msgstr "CTRL"

#: AppGUI/preferences/general/GeneralAPPSetGroupUI.py:384
msgid "SHIFT"
msgstr "SHIFT"

#: AppGUI/preferences/general/GeneralAPPSetGroupUI.py:395
msgid "Delete object confirmation"
msgstr "Delete object confirmation"

#: AppGUI/preferences/general/GeneralAPPSetGroupUI.py:397
msgid ""
"When checked the application will ask for user confirmation\n"
"whenever the Delete object(s) event is triggered, either by\n"
"menu shortcut or key shortcut."
msgstr ""
"When checked the application will ask for user confirmation\n"
"whenever the Delete object(s) event is triggered, either by\n"
"menu shortcut or key shortcut."

#: AppGUI/preferences/general/GeneralAPPSetGroupUI.py:404
msgid "\"Open\" behavior"
msgstr "\"Open\" behavior"

#: AppGUI/preferences/general/GeneralAPPSetGroupUI.py:406
msgid ""
"When checked the path for the last saved file is used when saving files,\n"
"and the path for the last opened file is used when opening files.\n"
"\n"
"When unchecked the path for opening files is the one used last: either the\n"
"path for saving files or the path for opening files."
msgstr ""
"When checked the path for the last saved file is used when saving files,\n"
"and the path for the last opened file is used when opening files.\n"
"\n"
"When unchecked the path for opening files is the one used last: either the\n"
"path for saving files or the path for opening files."

#: AppGUI/preferences/general/GeneralAPPSetGroupUI.py:415
msgid "Enable ToolTips"
msgstr "Enable ToolTips"

#: AppGUI/preferences/general/GeneralAPPSetGroupUI.py:417
msgid ""
"Check this box if you want to have toolTips displayed\n"
"when hovering with mouse over items throughout the App."
msgstr ""
"Check this box if you want to have toolTips displayed\n"
"when hovering with mouse over items throughout the App."

#: AppGUI/preferences/general/GeneralAPPSetGroupUI.py:424
msgid "Allow Machinist Unsafe Settings"
msgstr "Allow Machinist Unsafe Settings"

#: AppGUI/preferences/general/GeneralAPPSetGroupUI.py:426
msgid ""
"If checked, some of the application settings will be allowed\n"
"to have values that are usually unsafe to use.\n"
"Like Z travel negative values or Z Cut positive values.\n"
"It will applied at the next application start.\n"
"<<WARNING>>: Don't change this unless you know what you are doing !!!"
msgstr ""
"If checked, some of the application settings will be allowed\n"
"to have values that are usually unsafe to use.\n"
"Like Z travel negative values or Z Cut positive values.\n"
"It will applied at the next application start.\n"
"<<WARNING>>: Don't change this unless you know what you are doing !!!"

#: AppGUI/preferences/general/GeneralAPPSetGroupUI.py:438
msgid "Bookmarks limit"
msgstr "Bookmarks limit"

#: AppGUI/preferences/general/GeneralAPPSetGroupUI.py:440
msgid ""
"The maximum number of bookmarks that may be installed in the menu.\n"
"The number of bookmarks in the bookmark manager may be greater\n"
"but the menu will hold only so much."
msgstr ""
"The maximum number of bookmarks that may be installed in the menu.\n"
"The number of bookmarks in the bookmark manager may be greater\n"
"but the menu will hold only so much."

#: AppGUI/preferences/general/GeneralAPPSetGroupUI.py:449
msgid "Activity Icon"
msgstr "Activity Icon"

#: AppGUI/preferences/general/GeneralAPPSetGroupUI.py:451
msgid "Select the GIF that show activity when FlatCAM is active."
msgstr "Select the GIF that show activity when FlatCAM is active."

#: AppGUI/preferences/general/GeneralAppPrefGroupUI.py:29
msgid "App Preferences"
msgstr "App Preferences"

#: AppGUI/preferences/general/GeneralAppPrefGroupUI.py:40
msgid ""
"The default value for FlatCAM units.\n"
"Whatever is selected here is set every time\n"
"FlatCAM is started."
msgstr ""
"The default value for FlatCAM units.\n"
"Whatever is selected here is set every time\n"
"FlatCAM is started."

#: AppGUI/preferences/general/GeneralAppPrefGroupUI.py:44
msgid "IN"
msgstr "IN"

#: AppGUI/preferences/general/GeneralAppPrefGroupUI.py:50
msgid "Precision MM"
msgstr "Precision MM"

#: AppGUI/preferences/general/GeneralAppPrefGroupUI.py:52
msgid ""
"The number of decimals used throughout the application\n"
"when the set units are in METRIC system.\n"
"Any change here require an application restart."
msgstr ""
"The number of decimals used throughout the application\n"
"when the set units are in METRIC system.\n"
"Any change here require an application restart."

#: AppGUI/preferences/general/GeneralAppPrefGroupUI.py:64
msgid "Precision INCH"
msgstr "Precision INCH"

#: AppGUI/preferences/general/GeneralAppPrefGroupUI.py:66
msgid ""
"The number of decimals used throughout the application\n"
"when the set units are in INCH system.\n"
"Any change here require an application restart."
msgstr ""
"The number of decimals used throughout the application\n"
"when the set units are in INCH system.\n"
"Any change here require an application restart."

#: AppGUI/preferences/general/GeneralAppPrefGroupUI.py:78
msgid "Graphic Engine"
msgstr "Graphic Engine"

#: AppGUI/preferences/general/GeneralAppPrefGroupUI.py:79
msgid ""
"Choose what graphic engine to use in FlatCAM.\n"
"Legacy(2D) -> reduced functionality, slow performance but enhanced "
"compatibility.\n"
"OpenGL(3D) -> full functionality, high performance\n"
"Some graphic cards are too old and do not work in OpenGL(3D) mode, like:\n"
"Intel HD3000 or older. In this case the plot area will be black therefore\n"
"use the Legacy(2D) mode."
msgstr ""
"Choose what graphic engine to use in FlatCAM.\n"
"Legacy(2D) -> reduced functionality, slow performance but enhanced "
"compatibility.\n"
"OpenGL(3D) -> full functionality, high performance\n"
"Some graphic cards are too old and do not work in OpenGL(3D) mode, like:\n"
"Intel HD3000 or older. In this case the plot area will be black therefore\n"
"use the Legacy(2D) mode."

#: AppGUI/preferences/general/GeneralAppPrefGroupUI.py:85
msgid "Legacy(2D)"
msgstr "Legacy(2D)"

#: AppGUI/preferences/general/GeneralAppPrefGroupUI.py:86
msgid "OpenGL(3D)"
msgstr "OpenGL(3D)"

#: AppGUI/preferences/general/GeneralAppPrefGroupUI.py:98
msgid "APP. LEVEL"
msgstr "APP. LEVEL"

#: AppGUI/preferences/general/GeneralAppPrefGroupUI.py:99
msgid ""
"Choose the default level of usage for FlatCAM.\n"
"BASIC level -> reduced functionality, best for beginner's.\n"
"ADVANCED level -> full functionality.\n"
"\n"
"The choice here will influence the parameters in\n"
"the Selected Tab for all kinds of FlatCAM objects."
msgstr ""
"Choose the default level of usage for FlatCAM.\n"
"BASIC level -> reduced functionality, best for beginner's.\n"
"ADVANCED level -> full functionality.\n"
"\n"
"The choice here will influence the parameters in\n"
"the Selected Tab for all kinds of FlatCAM objects."

#: AppGUI/preferences/general/GeneralAppPrefGroupUI.py:105
#: AppObjects/FlatCAMExcellon.py:696 AppObjects/FlatCAMGeometry.py:582
#: AppObjects/FlatCAMGerber.py:278
msgid "Advanced"
msgstr "Advanced"

#: AppGUI/preferences/general/GeneralAppPrefGroupUI.py:111
msgid "Portable app"
msgstr "Portable app"

#: AppGUI/preferences/general/GeneralAppPrefGroupUI.py:112
msgid ""
"Choose if the application should run as portable.\n"
"\n"
"If Checked the application will run portable,\n"
"which means that the preferences files will be saved\n"
"in the application folder, in the lib\\config subfolder."
msgstr ""
"Choose if the application should run as portable.\n"
"\n"
"If Checked the application will run portable,\n"
"which means that the preferences files will be saved\n"
"in the application folder, in the lib\\config subfolder."

#: AppGUI/preferences/general/GeneralAppPrefGroupUI.py:125
msgid "Languages"
msgstr "Languages"

#: AppGUI/preferences/general/GeneralAppPrefGroupUI.py:126
msgid "Set the language used throughout FlatCAM."
msgstr "Set the language used throughout FlatCAM."

#: AppGUI/preferences/general/GeneralAppPrefGroupUI.py:132
msgid "Apply Language"
msgstr "Apply Language"

#: AppGUI/preferences/general/GeneralAppPrefGroupUI.py:133
msgid ""
"Set the language used throughout FlatCAM.\n"
"The app will restart after click."
msgstr ""
"Set the language used throughout FlatCAM.\n"
"The app will restart after click."

#: AppGUI/preferences/general/GeneralAppPrefGroupUI.py:147
msgid "Startup Settings"
msgstr "Startup Settings"

#: AppGUI/preferences/general/GeneralAppPrefGroupUI.py:151
msgid "Splash Screen"
msgstr "Splash Screen"

#: AppGUI/preferences/general/GeneralAppPrefGroupUI.py:153
msgid "Enable display of the splash screen at application startup."
msgstr "Enable display of the splash screen at application startup."

#: AppGUI/preferences/general/GeneralAppPrefGroupUI.py:165
msgid "Sys Tray Icon"
msgstr "Sys Tray Icon"

#: AppGUI/preferences/general/GeneralAppPrefGroupUI.py:167
msgid "Enable display of FlatCAM icon in Sys Tray."
msgstr "Enable display of FlatCAM icon in Sys Tray."

#: AppGUI/preferences/general/GeneralAppPrefGroupUI.py:172
msgid "Show Shell"
msgstr "Show Shell"

#: AppGUI/preferences/general/GeneralAppPrefGroupUI.py:174
msgid ""
"Check this box if you want the shell to\n"
"start automatically at startup."
msgstr ""
"Check this box if you want the shell to\n"
"start automatically at startup."

#: AppGUI/preferences/general/GeneralAppPrefGroupUI.py:181
msgid "Show Project"
msgstr "Show Project"

#: AppGUI/preferences/general/GeneralAppPrefGroupUI.py:183
msgid ""
"Check this box if you want the project/selected/tool tab area to\n"
"to be shown automatically at startup."
msgstr ""
"Check this box if you want the project/selected/tool tab area to\n"
"to be shown automatically at startup."

#: AppGUI/preferences/general/GeneralAppPrefGroupUI.py:189
msgid "Version Check"
msgstr "Version Check"

#: AppGUI/preferences/general/GeneralAppPrefGroupUI.py:191
msgid ""
"Check this box if you want to check\n"
"for a new version automatically at startup."
msgstr ""
"Check this box if you want to check\n"
"for a new version automatically at startup."

#: AppGUI/preferences/general/GeneralAppPrefGroupUI.py:198
msgid "Send Statistics"
msgstr "Send Statistics"

#: AppGUI/preferences/general/GeneralAppPrefGroupUI.py:200
msgid ""
"Check this box if you agree to send anonymous\n"
"stats automatically at startup, to help improve FlatCAM."
msgstr ""
"Check this box if you agree to send anonymous\n"
"stats automatically at startup, to help improve FlatCAM."

#: AppGUI/preferences/general/GeneralAppPrefGroupUI.py:214
msgid "Workers number"
msgstr "Workers number"

#: AppGUI/preferences/general/GeneralAppPrefGroupUI.py:216
msgid ""
"The number of Qthreads made available to the App.\n"
"A bigger number may finish the jobs more quickly but\n"
"depending on your computer speed, may make the App\n"
"unresponsive. Can have a value between 2 and 16.\n"
"Default value is 2.\n"
"After change, it will be applied at next App start."
msgstr ""
"The number of Qthreads made available to the App.\n"
"A bigger number may finish the jobs more quickly but\n"
"depending on your computer speed, may make the App\n"
"unresponsive. Can have a value between 2 and 16.\n"
"Default value is 2.\n"
"After change, it will be applied at next App start."

#: AppGUI/preferences/general/GeneralAppPrefGroupUI.py:230
msgid "Geo Tolerance"
msgstr "Geo Tolerance"

#: AppGUI/preferences/general/GeneralAppPrefGroupUI.py:232
msgid ""
"This value can counter the effect of the Circle Steps\n"
"parameter. Default value is 0.005.\n"
"A lower value will increase the detail both in image\n"
"and in Gcode for the circles, with a higher cost in\n"
"performance. Higher value will provide more\n"
"performance at the expense of level of detail."
msgstr ""
"This value can counter the effect of the Circle Steps\n"
"parameter. Default value is 0.005.\n"
"A lower value will increase the detail both in image\n"
"and in Gcode for the circles, with a higher cost in\n"
"performance. Higher value will provide more\n"
"performance at the expense of level of detail."

#: AppGUI/preferences/general/GeneralAppPrefGroupUI.py:252
msgid "Save Settings"
msgstr "Save Settings"

#: AppGUI/preferences/general/GeneralAppPrefGroupUI.py:256
msgid "Save Compressed Project"
msgstr "Save Compressed Project"

#: AppGUI/preferences/general/GeneralAppPrefGroupUI.py:258
msgid ""
"Whether to save a compressed or uncompressed project.\n"
"When checked it will save a compressed FlatCAM project."
msgstr ""
"Whether to save a compressed or uncompressed project.\n"
"When checked it will save a compressed FlatCAM project."

#: AppGUI/preferences/general/GeneralAppPrefGroupUI.py:267
msgid "Compression"
msgstr "Compression"

#: AppGUI/preferences/general/GeneralAppPrefGroupUI.py:269
msgid ""
"The level of compression used when saving\n"
"a FlatCAM project. Higher value means better compression\n"
"but require more RAM usage and more processing time."
msgstr ""
"The level of compression used when saving\n"
"a FlatCAM project. Higher value means better compression\n"
"but require more RAM usage and more processing time."

#: AppGUI/preferences/general/GeneralAppPrefGroupUI.py:280
msgid "Enable Auto Save"
msgstr "Enable Auto Save"

#: AppGUI/preferences/general/GeneralAppPrefGroupUI.py:282
msgid ""
"Check to enable the autosave feature.\n"
"When enabled, the application will try to save a project\n"
"at the set interval."
msgstr ""
"Check to enable the autosave feature.\n"
"When enabled, the application will try to save a project\n"
"at the set interval."

#: AppGUI/preferences/general/GeneralAppPrefGroupUI.py:292
msgid "Interval"
msgstr "Interval"

#: AppGUI/preferences/general/GeneralAppPrefGroupUI.py:294
msgid ""
"Time interval for autosaving. In milliseconds.\n"
"The application will try to save periodically but only\n"
"if the project was saved manually at least once.\n"
"While active, some operations may block this feature."
msgstr ""
"Time interval for autosaving. In milliseconds.\n"
"The application will try to save periodically but only\n"
"if the project was saved manually at least once.\n"
"While active, some operations may block this feature."

#: AppGUI/preferences/general/GeneralAppPrefGroupUI.py:310
msgid "Text to PDF parameters"
msgstr "Text to PDF parameters"

#: AppGUI/preferences/general/GeneralAppPrefGroupUI.py:312
msgid "Used when saving text in Code Editor or in FlatCAM Document objects."
msgstr "Used when saving text in Code Editor or in FlatCAM Document objects."

#: AppGUI/preferences/general/GeneralAppPrefGroupUI.py:321
msgid "Top Margin"
msgstr "Top Margin"

#: AppGUI/preferences/general/GeneralAppPrefGroupUI.py:323
msgid "Distance between text body and the top of the PDF file."
msgstr "Distance between text body and the top of the PDF file."

#: AppGUI/preferences/general/GeneralAppPrefGroupUI.py:334
msgid "Bottom Margin"
msgstr "Bottom Margin"

#: AppGUI/preferences/general/GeneralAppPrefGroupUI.py:336
msgid "Distance between text body and the bottom of the PDF file."
msgstr "Distance between text body and the bottom of the PDF file."

#: AppGUI/preferences/general/GeneralAppPrefGroupUI.py:347
msgid "Left Margin"
msgstr "Left Margin"

#: AppGUI/preferences/general/GeneralAppPrefGroupUI.py:349
msgid "Distance between text body and the left of the PDF file."
msgstr "Distance between text body and the left of the PDF file."

#: AppGUI/preferences/general/GeneralAppPrefGroupUI.py:360
msgid "Right Margin"
msgstr "Right Margin"

#: AppGUI/preferences/general/GeneralAppPrefGroupUI.py:362
msgid "Distance between text body and the right of the PDF file."
msgstr "Distance between text body and the right of the PDF file."

#: AppGUI/preferences/general/GeneralGUIPrefGroupUI.py:26
msgid "GUI Preferences"
msgstr "GUI Preferences"

#: AppGUI/preferences/general/GeneralGUIPrefGroupUI.py:36
msgid "Theme"
msgstr "Theme"

#: AppGUI/preferences/general/GeneralGUIPrefGroupUI.py:38
msgid ""
"Select a theme for FlatCAM.\n"
"It will theme the plot area."
msgstr ""
"Select a theme for FlatCAM.\n"
"It will theme the plot area."

#: AppGUI/preferences/general/GeneralGUIPrefGroupUI.py:43
msgid "Light"
msgstr "Light"

#: AppGUI/preferences/general/GeneralGUIPrefGroupUI.py:44
msgid "Dark"
msgstr "Dark"

#: AppGUI/preferences/general/GeneralGUIPrefGroupUI.py:51
msgid "Use Gray Icons"
msgstr "Use Gray Icons"

#: AppGUI/preferences/general/GeneralGUIPrefGroupUI.py:53
msgid ""
"Check this box to use a set of icons with\n"
"a lighter (gray) color. To be used when a\n"
"full dark theme is applied."
msgstr ""
"Check this box to use a set of icons with\n"
"a lighter (gray) color. To be used when a\n"
"full dark theme is applied."

#: AppGUI/preferences/general/GeneralGUIPrefGroupUI.py:73
msgid "Layout"
msgstr "Layout"

#: AppGUI/preferences/general/GeneralGUIPrefGroupUI.py:75
msgid ""
"Select an layout for FlatCAM.\n"
"It is applied immediately."
msgstr ""
"Select an layout for FlatCAM.\n"
"It is applied immediately."

#: AppGUI/preferences/general/GeneralGUIPrefGroupUI.py:95
msgid "Style"
msgstr "Style"

#: AppGUI/preferences/general/GeneralGUIPrefGroupUI.py:97
msgid ""
"Select an style for FlatCAM.\n"
"It will be applied at the next app start."
msgstr ""
"Select an style for FlatCAM.\n"
"It will be applied at the next app start."

#: AppGUI/preferences/general/GeneralGUIPrefGroupUI.py:111
msgid "Activate HDPI Support"
msgstr "Activate HDPI Support"

#: AppGUI/preferences/general/GeneralGUIPrefGroupUI.py:113
msgid ""
"Enable High DPI support for FlatCAM.\n"
"It will be applied at the next app start."
msgstr ""
"Enable High DPI support for FlatCAM.\n"
"It will be applied at the next app start."

#: AppGUI/preferences/general/GeneralGUIPrefGroupUI.py:127
msgid "Display Hover Shape"
msgstr "Display Hover Shape"

#: AppGUI/preferences/general/GeneralGUIPrefGroupUI.py:129
msgid ""
"Enable display of a hover shape for FlatCAM objects.\n"
"It is displayed whenever the mouse cursor is hovering\n"
"over any kind of not-selected object."
msgstr ""
"Enable display of a hover shape for FlatCAM objects.\n"
"It is displayed whenever the mouse cursor is hovering\n"
"over any kind of not-selected object."

#: AppGUI/preferences/general/GeneralGUIPrefGroupUI.py:136
msgid "Display Selection Shape"
msgstr "Display Selection Shape"

#: AppGUI/preferences/general/GeneralGUIPrefGroupUI.py:138
msgid ""
"Enable the display of a selection shape for FlatCAM objects.\n"
"It is displayed whenever the mouse selects an object\n"
"either by clicking or dragging mouse from left to right or\n"
"right to left."
msgstr ""
"Enable the display of a selection shape for FlatCAM objects.\n"
"It is displayed whenever the mouse selects an object\n"
"either by clicking or dragging mouse from left to right or\n"
"right to left."

#: AppGUI/preferences/general/GeneralGUIPrefGroupUI.py:151
msgid "Left-Right Selection Color"
msgstr "Left-Right Selection Color"

#: AppGUI/preferences/general/GeneralGUIPrefGroupUI.py:156
msgid "Set the line color for the 'left to right' selection box."
msgstr "Set the line color for the 'left to right' selection box."

#: AppGUI/preferences/general/GeneralGUIPrefGroupUI.py:172
msgid ""
"Set the fill color for the selection box\n"
"in case that the selection is done from left to right.\n"
"First 6 digits are the color and the last 2\n"
"digits are for alpha (transparency) level."
msgstr ""
"Set the fill color for the selection box\n"
"in case that the selection is done from left to right.\n"
"First 6 digits are the color and the last 2\n"
"digits are for alpha (transparency) level."

#: AppGUI/preferences/general/GeneralGUIPrefGroupUI.py:192
msgid "Set the fill transparency for the 'left to right' selection box."
msgstr "Set the fill transparency for the 'left to right' selection box."

#: AppGUI/preferences/general/GeneralGUIPrefGroupUI.py:216
msgid "Right-Left Selection Color"
msgstr "Right-Left Selection Color"

#: AppGUI/preferences/general/GeneralGUIPrefGroupUI.py:222
msgid "Set the line color for the 'right to left' selection box."
msgstr "Set the line color for the 'right to left' selection box."

#: AppGUI/preferences/general/GeneralGUIPrefGroupUI.py:239
msgid ""
"Set the fill color for the selection box\n"
"in case that the selection is done from right to left.\n"
"First 6 digits are the color and the last 2\n"
"digits are for alpha (transparency) level."
msgstr ""
"Set the fill color for the selection box\n"
"in case that the selection is done from right to left.\n"
"First 6 digits are the color and the last 2\n"
"digits are for alpha (transparency) level."

#: AppGUI/preferences/general/GeneralGUIPrefGroupUI.py:259
msgid "Set the fill transparency for selection 'right to left' box."
msgstr "Set the fill transparency for selection 'right to left' box."

#: AppGUI/preferences/general/GeneralGUIPrefGroupUI.py:286
msgid "Editor Color"
msgstr "Editor Color"

#: AppGUI/preferences/general/GeneralGUIPrefGroupUI.py:290
msgid "Drawing"
msgstr "Drawing"

#: AppGUI/preferences/general/GeneralGUIPrefGroupUI.py:292
msgid "Set the color for the shape."
msgstr "Set the color for the shape."

#: AppGUI/preferences/general/GeneralGUIPrefGroupUI.py:309
msgid "Set the color of the shape when selected."
msgstr "Set the color of the shape when selected."

#: AppGUI/preferences/general/GeneralGUIPrefGroupUI.py:332
msgid "Project Items Color"
msgstr "Project Items Color"

#: AppGUI/preferences/general/GeneralGUIPrefGroupUI.py:336
msgid "Enabled"
msgstr "Enabled"

#: AppGUI/preferences/general/GeneralGUIPrefGroupUI.py:338
msgid "Set the color of the items in Project Tab Tree."
msgstr "Set the color of the items in Project Tab Tree."

#: AppGUI/preferences/general/GeneralGUIPrefGroupUI.py:352
msgid "Disabled"
msgstr "Disabled"

#: AppGUI/preferences/general/GeneralGUIPrefGroupUI.py:354
msgid ""
"Set the color of the items in Project Tab Tree,\n"
"for the case when the items are disabled."
msgstr ""
"Set the color of the items in Project Tab Tree,\n"
"for the case when the items are disabled."

#: AppGUI/preferences/general/GeneralGUIPrefGroupUI.py:370
msgid "Project AutoHide"
msgstr "Project AutoHide"

#: AppGUI/preferences/general/GeneralGUIPrefGroupUI.py:372
msgid ""
"Check this box if you want the project/selected/tool tab area to\n"
"hide automatically when there are no objects loaded and\n"
"to show whenever a new object is created."
msgstr ""
"Check this box if you want the project/selected/tool tab area to\n"
"hide automatically when there are no objects loaded and\n"
"to show whenever a new object is created."

#: AppGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:27
msgid "Geometry Adv. Options"
msgstr "Geometry Adv. Options"

#: AppGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:35
msgid ""
"A list of Geometry advanced parameters.\n"
"Those parameters are available only for\n"
"Advanced App. Level."
msgstr ""
"A list of Geometry advanced parameters.\n"
"Those parameters are available only for\n"
"Advanced App. Level."

#: AppGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:45
#: AppGUI/preferences/tools/Tools2CalPrefGroupUI.py:112
#: AppGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:134
#: AppTools/ToolCalibration.py:125 AppTools/ToolSolderPaste.py:240
msgid "Toolchange X-Y"
msgstr "Toolchange X-Y"

#: AppGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:56
msgid ""
"Height of the tool just after starting the work.\n"
"Delete the value if you don't need this feature."
msgstr ""
"Height of the tool just after starting the work.\n"
"Delete the value if you don't need this feature."

#: AppGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:158
msgid "Segment X size"
msgstr "Segment X size"

#: AppGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:160
msgid ""
"The size of the trace segment on the X axis.\n"
"Useful for auto-leveling.\n"
"A value of 0 means no segmentation on the X axis."
msgstr ""
"The size of the trace segment on the X axis.\n"
"Useful for auto-leveling.\n"
"A value of 0 means no segmentation on the X axis."

#: AppGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:174
msgid "Segment Y size"
msgstr "Segment Y size"

#: AppGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:176
msgid ""
"The size of the trace segment on the Y axis.\n"
"Useful for auto-leveling.\n"
"A value of 0 means no segmentation on the Y axis."
msgstr ""
"The size of the trace segment on the Y axis.\n"
"Useful for auto-leveling.\n"
"A value of 0 means no segmentation on the Y axis."

#: AppGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:192
msgid "Area Exclusion"
msgstr "Area Exclusion"

#: AppGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:194
msgid ""
"Area exclusion parameters.\n"
"Those parameters are available only for\n"
"Advanced App. Level."
msgstr ""
"Area exclusion parameters.\n"
"Those parameters are available only for\n"
"Advanced App. Level."

#: AppGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:201
msgid "Exclusion areas"
msgstr "Exclusion areas"

#: AppGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:212
#: AppGUI/preferences/tools/ToolsNCCPrefGroupUI.py:322
#: AppGUI/preferences/tools/ToolsPaintPrefGroupUI.py:286
#: AppTools/ToolNCC.py:578 AppTools/ToolPaint.py:521
msgid "Shape"
msgstr "Shape"

#: AppGUI/preferences/geometry/GeometryEditorPrefGroupUI.py:33
msgid "A list of Geometry Editor parameters."
msgstr "A list of Geometry Editor parameters."

#: AppGUI/preferences/geometry/GeometryEditorPrefGroupUI.py:43
#: AppGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:196
msgid ""
"Set the number of selected geometry\n"
"items above which the utility geometry\n"
"becomes just a selection rectangle.\n"
"Increases the performance when moving a\n"
"large number of geometric elements."
msgstr ""
"Set the number of selected geometry\n"
"items above which the utility geometry\n"
"becomes just a selection rectangle.\n"
"Increases the performance when moving a\n"
"large number of geometric elements."

#: AppGUI/preferences/geometry/GeometryGenPrefGroupUI.py:27
msgid "Geometry General"
msgstr "Geometry General"

#: AppGUI/preferences/geometry/GeometryGenPrefGroupUI.py:49
msgid ""
"The number of circle steps for <b>Geometry</b> \n"
"circle and arc shapes linear approximation."
msgstr ""
"The number of circle steps for <b>Geometry</b> \n"
"circle and arc shapes linear approximation."

#: AppGUI/preferences/geometry/GeometryGenPrefGroupUI.py:63
#: AppGUI/preferences/tools/ToolsNCCPrefGroupUI.py:41
#: AppGUI/preferences/tools/ToolsPaintPrefGroupUI.py:48
#: AppGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:42
msgid "Tools Dia"
msgstr "Tools Dia"

#: AppGUI/preferences/geometry/GeometryGenPrefGroupUI.py:65
#: AppGUI/preferences/gerber/GerberEditorPrefGroupUI.py:108
#: AppGUI/preferences/tools/ToolsNCCPrefGroupUI.py:43
#: AppGUI/preferences/tools/ToolsPaintPrefGroupUI.py:50
#: AppGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:44
msgid ""
"Diameters of the tools, separated by comma.\n"
"The value of the diameter has to use the dot decimals separator.\n"
"Valid values: 0.3, 1.0"
msgstr ""
"Diameters of the tools, separated by comma.\n"
"The value of the diameter has to use the dot decimals separator.\n"
"Valid values: 0.3, 1.0"

#: AppGUI/preferences/geometry/GeometryGenPrefGroupUI.py:80
msgid "Geometry Object Color"
msgstr "Geometry Object Color"

#: AppGUI/preferences/geometry/GeometryOptPrefGroupUI.py:28
msgid "Geometry Options"
msgstr "Geometry Options"

#: AppGUI/preferences/geometry/GeometryOptPrefGroupUI.py:36
msgid ""
"Create a CNC Job object\n"
"tracing the contours of this\n"
"Geometry object."
msgstr ""
"Create a CNC Job object\n"
"tracing the contours of this\n"
"Geometry object."

#: AppGUI/preferences/geometry/GeometryOptPrefGroupUI.py:80
msgid "Depth/Pass"
msgstr "Depth/Pass"

#: AppGUI/preferences/geometry/GeometryOptPrefGroupUI.py:82
msgid ""
"The depth to cut on each pass,\n"
"when multidepth is enabled.\n"
"It has positive value although\n"
"it is a fraction from the depth\n"
"which has negative value."
msgstr ""
"The depth to cut on each pass,\n"
"when multidepth is enabled.\n"
"It has positive value although\n"
"it is a fraction from the depth\n"
"which has negative value."

#: AppGUI/preferences/gerber/GerberAdvOptPrefGroupUI.py:27
msgid "Gerber Adv. Options"
msgstr "Gerber Adv. Options"

#: AppGUI/preferences/gerber/GerberAdvOptPrefGroupUI.py:33
msgid ""
"A list of Gerber advanced parameters.\n"
"Those parameters are available only for\n"
"Advanced App. Level."
msgstr ""
"A list of Gerber advanced parameters.\n"
"Those parameters are available only for\n"
"Advanced App. Level."

#: AppGUI/preferences/gerber/GerberAdvOptPrefGroupUI.py:52
msgid "Table Show/Hide"
msgstr "Table Show/Hide"

#: AppGUI/preferences/gerber/GerberAdvOptPrefGroupUI.py:54
msgid ""
"Toggle the display of the Gerber Apertures Table.\n"
"Also, on hide, it will delete all mark shapes\n"
"that are drawn on canvas."
msgstr ""
"Toggle the display of the Gerber Apertures Table.\n"
"Also, on hide, it will delete all mark shapes\n"
"that are drawn on canvas."

#: AppGUI/preferences/gerber/GerberAdvOptPrefGroupUI.py:134
msgid "Exterior"
msgstr "Exterior"

#: AppGUI/preferences/gerber/GerberAdvOptPrefGroupUI.py:135
msgid "Interior"
msgstr "Interior"

#: AppGUI/preferences/gerber/GerberAdvOptPrefGroupUI.py:146
#: AppObjects/FlatCAMGerber.py:497 AppTools/ToolCopperThieving.py:1022
#: AppTools/ToolCopperThieving.py:1211 AppTools/ToolCopperThieving.py:1223
#: AppTools/ToolNCC.py:2059 AppTools/ToolNCC.py:2170 AppTools/ToolNCC.py:2185
#: AppTools/ToolNCC.py:3149 AppTools/ToolNCC.py:3254 AppTools/ToolNCC.py:3269
#: AppTools/ToolNCC.py:3535 AppTools/ToolNCC.py:3636 AppTools/ToolNCC.py:3651
#: camlib.py:982
msgid "Buffering"
msgstr "Buffering"

#: AppGUI/preferences/gerber/GerberAdvOptPrefGroupUI.py:148
msgid ""
"Buffering type:\n"
"- None --> best performance, fast file loading but no so good display\n"
"- Full --> slow file loading but good visuals. This is the default.\n"
"<<WARNING>>: Don't change this unless you know what you are doing !!!"
msgstr ""
"Buffering type:\n"
"- None --> best performance, fast file loading but no so good display\n"
"- Full --> slow file loading but good visuals. This is the default.\n"
"<<WARNING>>: Don't change this unless you know what you are doing !!!"

#: AppGUI/preferences/gerber/GerberAdvOptPrefGroupUI.py:153
#: AppGUI/preferences/tools/Tools2FiducialsPrefGroupUI.py:88
#: AppGUI/preferences/tools/ToolsFilmPrefGroupUI.py:207
#: AppTools/ToolFiducials.py:201 AppTools/ToolFilm.py:238
#: AppTools/ToolProperties.py:452 AppTools/ToolProperties.py:455
#: AppTools/ToolProperties.py:458 AppTools/ToolProperties.py:483
msgid "None"
msgstr "None"

#: AppGUI/preferences/gerber/GerberAdvOptPrefGroupUI.py:159
msgid "Simplify"
msgstr "Simplify"

#: AppGUI/preferences/gerber/GerberAdvOptPrefGroupUI.py:161
msgid ""
"When checked all the Gerber polygons will be\n"
"loaded with simplification having a set tolerance.\n"
"<<WARNING>>: Don't change this unless you know what you are doing !!!"
msgstr ""
"When checked all the Gerber polygons will be\n"
"loaded with simplification having a set tolerance.\n"
"<<WARNING>>: Don't change this unless you know what you are doing !!!"

#: AppGUI/preferences/gerber/GerberAdvOptPrefGroupUI.py:168
msgid "Tolerance"
msgstr "Tolerance"

#: AppGUI/preferences/gerber/GerberAdvOptPrefGroupUI.py:169
msgid "Tolerance for polygon simplification."
msgstr "Tolerance for polygon simplification."

#: AppGUI/preferences/gerber/GerberEditorPrefGroupUI.py:33
msgid "A list of Gerber Editor parameters."
msgstr "A list of Gerber Editor parameters."

#: AppGUI/preferences/gerber/GerberEditorPrefGroupUI.py:43
msgid ""
"Set the number of selected Gerber geometry\n"
"items above which the utility geometry\n"
"becomes just a selection rectangle.\n"
"Increases the performance when moving a\n"
"large number of geometric elements."
msgstr ""
"Set the number of selected Gerber geometry\n"
"items above which the utility geometry\n"
"becomes just a selection rectangle.\n"
"Increases the performance when moving a\n"
"large number of geometric elements."

#: AppGUI/preferences/gerber/GerberEditorPrefGroupUI.py:56
msgid "New Aperture code"
msgstr "New Aperture code"

#: AppGUI/preferences/gerber/GerberEditorPrefGroupUI.py:69
msgid "New Aperture size"
msgstr "New Aperture size"

#: AppGUI/preferences/gerber/GerberEditorPrefGroupUI.py:71
msgid "Size for the new aperture"
msgstr "Size for the new aperture"

#: AppGUI/preferences/gerber/GerberEditorPrefGroupUI.py:82
msgid "New Aperture type"
msgstr "New Aperture type"

#: AppGUI/preferences/gerber/GerberEditorPrefGroupUI.py:84
msgid ""
"Type for the new aperture.\n"
"Can be 'C', 'R' or 'O'."
msgstr ""
"Type for the new aperture.\n"
"Can be 'C', 'R' or 'O'."

#: AppGUI/preferences/gerber/GerberEditorPrefGroupUI.py:106
msgid "Aperture Dimensions"
msgstr "Aperture Dimensions"

#: AppGUI/preferences/gerber/GerberEditorPrefGroupUI.py:116
msgid "Linear Pad Array"
msgstr "Linear Pad Array"

#: AppGUI/preferences/gerber/GerberEditorPrefGroupUI.py:160
msgid "Circular Pad Array"
msgstr "Circular Pad Array"

#: AppGUI/preferences/gerber/GerberEditorPrefGroupUI.py:196
msgid "Distance at which to buffer the Gerber element."
msgstr "Distance at which to buffer the Gerber element."

#: AppGUI/preferences/gerber/GerberEditorPrefGroupUI.py:205
msgid "Scale Tool"
msgstr "Scale Tool"

#: AppGUI/preferences/gerber/GerberEditorPrefGroupUI.py:211
msgid "Factor to scale the Gerber element."
msgstr "Factor to scale the Gerber element."

#: AppGUI/preferences/gerber/GerberEditorPrefGroupUI.py:224
msgid "Threshold low"
msgstr "Threshold low"

#: AppGUI/preferences/gerber/GerberEditorPrefGroupUI.py:226
msgid "Threshold value under which the apertures are not marked."
msgstr "Threshold value under which the apertures are not marked."

#: AppGUI/preferences/gerber/GerberEditorPrefGroupUI.py:236
msgid "Threshold high"
msgstr "Threshold high"

#: AppGUI/preferences/gerber/GerberEditorPrefGroupUI.py:238
msgid "Threshold value over which the apertures are not marked."
msgstr "Threshold value over which the apertures are not marked."

#: AppGUI/preferences/gerber/GerberExpPrefGroupUI.py:27
msgid "Gerber Export"
msgstr "Gerber Export"

#: AppGUI/preferences/gerber/GerberExpPrefGroupUI.py:33
msgid ""
"The parameters set here are used in the file exported\n"
"when using the File -> Export -> Export Gerber menu entry."
msgstr ""
"The parameters set here are used in the file exported\n"
"when using the File -> Export -> Export Gerber menu entry."

#: AppGUI/preferences/gerber/GerberExpPrefGroupUI.py:44
#: AppGUI/preferences/gerber/GerberExpPrefGroupUI.py:50
#: AppGUI/preferences/gerber/GerberGenPrefGroupUI.py:84
#: AppGUI/preferences/gerber/GerberGenPrefGroupUI.py:90
msgid "The units used in the Gerber file."
msgstr "The units used in the Gerber file."

#: AppGUI/preferences/gerber/GerberExpPrefGroupUI.py:58
msgid ""
"The number of digits in the whole part of the number\n"
"and in the fractional part of the number."
msgstr ""
"The number of digits in the whole part of the number\n"
"and in the fractional part of the number."

#: AppGUI/preferences/gerber/GerberExpPrefGroupUI.py:71
msgid ""
"This numbers signify the number of digits in\n"
"the whole part of Gerber coordinates."
msgstr ""
"This numbers signify the number of digits in\n"
"the whole part of Gerber coordinates."

#: AppGUI/preferences/gerber/GerberExpPrefGroupUI.py:87
msgid ""
"This numbers signify the number of digits in\n"
"the decimal part of Gerber coordinates."
msgstr ""
"This numbers signify the number of digits in\n"
"the decimal part of Gerber coordinates."

#: AppGUI/preferences/gerber/GerberExpPrefGroupUI.py:99
#: AppGUI/preferences/gerber/GerberExpPrefGroupUI.py:109
#: AppGUI/preferences/gerber/GerberGenPrefGroupUI.py:100
#: AppGUI/preferences/gerber/GerberGenPrefGroupUI.py:110
msgid ""
"This sets the type of Gerber zeros.\n"
"If LZ then Leading Zeros are removed and\n"
"Trailing Zeros are kept.\n"
"If TZ is checked then Trailing Zeros are removed\n"
"and Leading Zeros are kept."
msgstr ""
"This sets the type of Gerber zeros.\n"
"If LZ then Leading Zeros are removed and\n"
"Trailing Zeros are kept.\n"
"If TZ is checked then Trailing Zeros are removed\n"
"and Leading Zeros are kept."

#: AppGUI/preferences/gerber/GerberGenPrefGroupUI.py:27
msgid "Gerber General"
msgstr "Gerber General"

#: AppGUI/preferences/gerber/GerberGenPrefGroupUI.py:45
msgid "M-Color"
msgstr "M-Color"

#: AppGUI/preferences/gerber/GerberGenPrefGroupUI.py:61
msgid ""
"The number of circle steps for Gerber \n"
"circular aperture linear approximation."
msgstr ""
"The number of circle steps for Gerber \n"
"circular aperture linear approximation."

#: AppGUI/preferences/gerber/GerberGenPrefGroupUI.py:73
msgid "Default Values"
msgstr "Default Values"

#: AppGUI/preferences/gerber/GerberGenPrefGroupUI.py:75
msgid ""
"Those values will be used as fallback values\n"
"in case that they are not found in the Gerber file."
msgstr ""
"Those values will be used as fallback values\n"
"in case that they are not found in the Gerber file."

#: AppGUI/preferences/gerber/GerberGenPrefGroupUI.py:126
msgid "Clean Apertures"
msgstr "Clean Apertures"

#: AppGUI/preferences/gerber/GerberGenPrefGroupUI.py:128
msgid ""
"Will remove apertures that do not have geometry\n"
"thus lowering the number of apertures in the Gerber object."
msgstr ""
"Will remove apertures that do not have geometry\n"
"thus lowering the number of apertures in the Gerber object."

#: AppGUI/preferences/gerber/GerberGenPrefGroupUI.py:134
msgid "Polarity change buffer"
msgstr "Polarity change buffer"

#: AppGUI/preferences/gerber/GerberGenPrefGroupUI.py:136
msgid ""
"Will apply extra buffering for the\n"
"solid geometry when we have polarity changes.\n"
"May help loading Gerber files that otherwise\n"
"do not load correctly."
msgstr ""
"Will apply extra buffering for the\n"
"solid geometry when we have polarity changes.\n"
"May help loading Gerber files that otherwise\n"
"do not load correctly."

#: AppGUI/preferences/gerber/GerberGenPrefGroupUI.py:149
msgid "Gerber Object Color"
msgstr "Gerber Object Color"

#: AppGUI/preferences/gerber/GerberOptPrefGroupUI.py:29
msgid "Gerber Options"
msgstr "Gerber Options"

#: AppGUI/preferences/gerber/GerberOptPrefGroupUI.py:107
msgid "Combine Passes"
msgstr "Combine Passes"

#: AppGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:27
msgid "Copper Thieving Tool Options"
msgstr "Copper Thieving Tool Options"

#: AppGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:39
msgid ""
"A tool to generate a Copper Thieving that can be added\n"
"to a selected Gerber file."
msgstr ""
"A tool to generate a Copper Thieving that can be added\n"
"to a selected Gerber file."

#: AppGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:47
msgid "Number of steps (lines) used to interpolate circles."
msgstr "Number of steps (lines) used to interpolate circles."

#: AppGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:57
#: AppGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:261
#: AppTools/ToolCopperThieving.py:96 AppTools/ToolCopperThieving.py:431
msgid "Clearance"
msgstr "Clearance"

#: AppGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:59
msgid ""
"This set the distance between the copper Thieving components\n"
"(the polygon fill may be split in multiple polygons)\n"
"and the copper traces in the Gerber file."
msgstr ""
"This set the distance between the copper Thieving components\n"
"(the polygon fill may be split in multiple polygons)\n"
"and the copper traces in the Gerber file."

#: AppGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:86
#: AppGUI/preferences/tools/ToolsNCCPrefGroupUI.py:309
#: AppTools/ToolCopperThieving.py:125 AppTools/ToolNCC.py:535
#: AppTools/ToolNCC.py:1306 AppTools/ToolNCC.py:1635 AppTools/ToolNCC.py:1928
#: AppTools/ToolNCC.py:1992 AppTools/ToolNCC.py:3013 AppTools/ToolNCC.py:3022
#: defaults.py:406 tclCommands/TclCommandCopperClear.py:190
msgid "Itself"
msgstr "Itself"

#: AppGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:87
#: AppGUI/preferences/tools/ToolsNCCPrefGroupUI.py:309
#: AppGUI/preferences/tools/ToolsPaintPrefGroupUI.py:280
#: AppTools/ToolCopperThieving.py:126 AppTools/ToolNCC.py:535
#: AppTools/ToolNCC.py:1316 AppTools/ToolNCC.py:1648 AppTools/ToolNCC.py:1944
#: AppTools/ToolNCC.py:1999 AppTools/ToolPaint.py:485 AppTools/ToolPaint.py:945
#: AppTools/ToolPaint.py:1451
msgid "Area Selection"
msgstr "Area Selection"

#: AppGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:88
#: AppGUI/preferences/tools/ToolsNCCPrefGroupUI.py:309
#: AppGUI/preferences/tools/ToolsPaintPrefGroupUI.py:280
#: AppTools/ToolCopperThieving.py:127 AppTools/ToolDblSided.py:216
#: AppTools/ToolNCC.py:535 AppTools/ToolNCC.py:1664 AppTools/ToolNCC.py:1950
#: AppTools/ToolNCC.py:2007 AppTools/ToolNCC.py:2383 AppTools/ToolNCC.py:2631
#: AppTools/ToolNCC.py:3058 AppTools/ToolPaint.py:485 AppTools/ToolPaint.py:930
#: AppTools/ToolPaint.py:1467 tclCommands/TclCommandCopperClear.py:192
#: tclCommands/TclCommandPaint.py:166
msgid "Reference Object"
msgstr "Reference Object"

#: AppGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:90
#: AppTools/ToolCopperThieving.py:129
msgid "Reference:"
msgstr "Reference:"

#: AppGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:92
msgid ""
"- 'Itself' - the copper Thieving extent is based on the object extent.\n"
"- 'Area Selection' - left mouse click to start selection of the area to be "
"filled.\n"
"- 'Reference Object' - will do copper thieving within the area specified by "
"another object."
msgstr ""
"- 'Itself' - the copper Thieving extent is based on the object extent.\n"
"- 'Area Selection' - left mouse click to start selection of the area to be "
"filled.\n"
"- 'Reference Object' - will do copper thieving within the area specified by "
"another object."

#: AppGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:101
#: AppGUI/preferences/tools/Tools2EDrillsPrefGroupUI.py:76
#: AppGUI/preferences/tools/Tools2EDrillsPrefGroupUI.py:188
#: AppGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:76
#: AppGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:190
#: AppTools/ToolCopperThieving.py:171 AppTools/ToolExtractDrills.py:102
#: AppTools/ToolExtractDrills.py:240 AppTools/ToolPunchGerber.py:113
#: AppTools/ToolPunchGerber.py:268
msgid "Rectangular"
msgstr "Rectangular"

#: AppGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:102
#: AppTools/ToolCopperThieving.py:172
msgid "Minimal"
msgstr "Minimal"

#: AppGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:104
#: AppTools/ToolCopperThieving.py:174 AppTools/ToolFilm.py:94
msgid "Box Type:"
msgstr "Box Type:"

#: AppGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:106
#: AppTools/ToolCopperThieving.py:176
msgid ""
"- 'Rectangular' - the bounding box will be of rectangular shape.\n"
"- 'Minimal' - the bounding box will be the convex hull shape."
msgstr ""
"- 'Rectangular' - the bounding box will be of rectangular shape.\n"
"- 'Minimal' - the bounding box will be the convex hull shape."

#: AppGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:120
#: AppTools/ToolCopperThieving.py:192
msgid "Dots Grid"
msgstr "Dots Grid"

#: AppGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:121
#: AppTools/ToolCopperThieving.py:193
msgid "Squares Grid"
msgstr "Squares Grid"

#: AppGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:122
#: AppTools/ToolCopperThieving.py:194
msgid "Lines Grid"
msgstr "Lines Grid"

#: AppGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:124
#: AppTools/ToolCopperThieving.py:196
msgid "Fill Type:"
msgstr "Fill Type:"

#: AppGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:126
#: AppTools/ToolCopperThieving.py:198
msgid ""
"- 'Solid' - copper thieving will be a solid polygon.\n"
"- 'Dots Grid' - the empty area will be filled with a pattern of dots.\n"
"- 'Squares Grid' - the empty area will be filled with a pattern of squares.\n"
"- 'Lines Grid' - the empty area will be filled with a pattern of lines."
msgstr ""
"- 'Solid' - copper thieving will be a solid polygon.\n"
"- 'Dots Grid' - the empty area will be filled with a pattern of dots.\n"
"- 'Squares Grid' - the empty area will be filled with a pattern of squares.\n"
"- 'Lines Grid' - the empty area will be filled with a pattern of lines."

#: AppGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:134
#: AppTools/ToolCopperThieving.py:217
msgid "Dots Grid Parameters"
msgstr "Dots Grid Parameters"

#: AppGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:140
#: AppTools/ToolCopperThieving.py:223
msgid "Dot diameter in Dots Grid."
msgstr "Dot diameter in Dots Grid."

#: AppGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:151
#: AppGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:180
#: AppGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:209
#: AppTools/ToolCopperThieving.py:234 AppTools/ToolCopperThieving.py:274
#: AppTools/ToolCopperThieving.py:314
msgid "Spacing"
msgstr "Spacing"

#: AppGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:153
#: AppTools/ToolCopperThieving.py:236
msgid "Distance between each two dots in Dots Grid."
msgstr "Distance between each two dots in Dots Grid."

#: AppGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:163
#: AppTools/ToolCopperThieving.py:257
msgid "Squares Grid Parameters"
msgstr "Squares Grid Parameters"

#: AppGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:169
#: AppTools/ToolCopperThieving.py:263
msgid "Square side size in Squares Grid."
msgstr "Square side size in Squares Grid."

#: AppGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:182
#: AppTools/ToolCopperThieving.py:276
msgid "Distance between each two squares in Squares Grid."
msgstr "Distance between each two squares in Squares Grid."

#: AppGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:192
#: AppTools/ToolCopperThieving.py:297
msgid "Lines Grid Parameters"
msgstr "Lines Grid Parameters"

#: AppGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:198
#: AppTools/ToolCopperThieving.py:303
msgid "Line thickness size in Lines Grid."
msgstr "Line thickness size in Lines Grid."

#: AppGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:211
#: AppTools/ToolCopperThieving.py:316
msgid "Distance between each two lines in Lines Grid."
msgstr "Distance between each two lines in Lines Grid."

#: AppGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:221
#: AppTools/ToolCopperThieving.py:354
msgid "Robber Bar Parameters"
msgstr "Robber Bar Parameters"

#: AppGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:223
#: AppTools/ToolCopperThieving.py:356
msgid ""
"Parameters used for the robber bar.\n"
"Robber bar = copper border to help in pattern hole plating."
msgstr ""
"Parameters used for the robber bar.\n"
"Robber bar = copper border to help in pattern hole plating."

#: AppGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:231
#: AppTools/ToolCopperThieving.py:364
msgid "Bounding box margin for robber bar."
msgstr "Bounding box margin for robber bar."

#: AppGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:242
#: AppGUI/preferences/tools/ToolsCornersPrefGroupUI.py:42
#: AppTools/ToolCopperThieving.py:375 AppTools/ToolCorners.py:113
msgid "Thickness"
msgstr "Thickness"

#: AppGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:244
#: AppTools/ToolCopperThieving.py:377
msgid "The robber bar thickness."
msgstr "The robber bar thickness."

#: AppGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:254
#: AppTools/ToolCopperThieving.py:408
msgid "Pattern Plating Mask"
msgstr "Pattern Plating Mask"

#: AppGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:256
#: AppTools/ToolCopperThieving.py:410
msgid "Generate a mask for pattern plating."
msgstr "Generate a mask for pattern plating."

#: AppGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:263
#: AppTools/ToolCopperThieving.py:433
msgid ""
"The distance between the possible copper thieving elements\n"
"and/or robber bar and the actual openings in the mask."
msgstr ""
"The distance between the possible copper thieving elements\n"
"and/or robber bar and the actual openings in the mask."

#: AppGUI/preferences/tools/Tools2CalPrefGroupUI.py:27
msgid "Calibration Tool Options"
msgstr "Calibration Tool Options"

#: AppGUI/preferences/tools/Tools2CalPrefGroupUI.py:38
#: AppGUI/preferences/tools/Tools2EDrillsPrefGroupUI.py:38
#: AppGUI/preferences/tools/Tools2FiducialsPrefGroupUI.py:38
#: AppGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:38
#: AppGUI/preferences/tools/ToolsCornersPrefGroupUI.py:37
#: AppTools/ToolCopperThieving.py:91 AppTools/ToolCorners.py:108
#: AppTools/ToolFiducials.py:151
msgid "Parameters used for this tool."
msgstr "Parameters used for this tool."

#: AppGUI/preferences/tools/Tools2CalPrefGroupUI.py:43
#: AppTools/ToolCalibration.py:181
msgid "Source Type"
msgstr "Source Type"

#: AppGUI/preferences/tools/Tools2CalPrefGroupUI.py:44
#: AppTools/ToolCalibration.py:182
msgid ""
"The source of calibration points.\n"
"It can be:\n"
"- Object -> click a hole geo for Excellon or a pad for Gerber\n"
"- Free -> click freely on canvas to acquire the calibration points"
msgstr ""
"The source of calibration points.\n"
"It can be:\n"
"- Object -> click a hole geo for Excellon or a pad for Gerber\n"
"- Free -> click freely on canvas to acquire the calibration points"

#: AppGUI/preferences/tools/Tools2CalPrefGroupUI.py:49
#: AppTools/ToolCalibration.py:187
msgid "Free"
msgstr "Free"

#: AppGUI/preferences/tools/Tools2CalPrefGroupUI.py:63
#: AppTools/ToolCalibration.py:76
msgid "Height (Z) for travelling between the points."
msgstr "Height (Z) for travelling between the points."

#: AppGUI/preferences/tools/Tools2CalPrefGroupUI.py:75
#: AppTools/ToolCalibration.py:88
msgid "Verification Z"
msgstr "Verification Z"

#: AppGUI/preferences/tools/Tools2CalPrefGroupUI.py:77
#: AppTools/ToolCalibration.py:90
msgid "Height (Z) for checking the point."
msgstr "Height (Z) for checking the point."

#: AppGUI/preferences/tools/Tools2CalPrefGroupUI.py:89
#: AppTools/ToolCalibration.py:102
msgid "Zero Z tool"
msgstr "Zero Z tool"

#: AppGUI/preferences/tools/Tools2CalPrefGroupUI.py:91
#: AppTools/ToolCalibration.py:104
msgid ""
"Include a sequence to zero the height (Z)\n"
"of the verification tool."
msgstr ""
"Include a sequence to zero the height (Z)\n"
"of the verification tool."

#: AppGUI/preferences/tools/Tools2CalPrefGroupUI.py:100
#: AppTools/ToolCalibration.py:113
msgid "Height (Z) for mounting the verification probe."
msgstr "Height (Z) for mounting the verification probe."

#: AppGUI/preferences/tools/Tools2CalPrefGroupUI.py:114
#: AppTools/ToolCalibration.py:127
msgid ""
"Toolchange X,Y position.\n"
"If no value is entered then the current\n"
"(x, y) point will be used,"
msgstr ""
"Toolchange X,Y position.\n"
"If no value is entered then the current\n"
"(x, y) point will be used,"

#: AppGUI/preferences/tools/Tools2CalPrefGroupUI.py:125
#: AppTools/ToolCalibration.py:153
msgid "Second point"
msgstr "Second point"

#: AppGUI/preferences/tools/Tools2CalPrefGroupUI.py:127
#: AppTools/ToolCalibration.py:155
msgid ""
"Second point in the Gcode verification can be:\n"
"- top-left -> the user will align the PCB vertically\n"
"- bottom-right -> the user will align the PCB horizontally"
msgstr ""
"Second point in the Gcode verification can be:\n"
"- top-left -> the user will align the PCB vertically\n"
"- bottom-right -> the user will align the PCB horizontally"

#: AppGUI/preferences/tools/Tools2CalPrefGroupUI.py:131
#: AppTools/ToolCalibration.py:159 App_Main.py:4934
msgid "Top-Left"
msgstr "Top-Left"

#: AppGUI/preferences/tools/Tools2CalPrefGroupUI.py:132
#: AppTools/ToolCalibration.py:160 App_Main.py:4935
msgid "Bottom-Right"
msgstr "Bottom-Right"

#: AppGUI/preferences/tools/Tools2EDrillsPrefGroupUI.py:27
msgid "Extract Drills Options"
msgstr "Extract Drills Options"

#: AppGUI/preferences/tools/Tools2EDrillsPrefGroupUI.py:42
#: AppGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:42
#: AppTools/ToolExtractDrills.py:68 AppTools/ToolPunchGerber.py:75
msgid "Processed Pads Type"
msgstr "Processed Pads Type"

#: AppGUI/preferences/tools/Tools2EDrillsPrefGroupUI.py:44
#: AppGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:44
#: AppTools/ToolExtractDrills.py:70 AppTools/ToolPunchGerber.py:77
msgid ""
"The type of pads shape to be processed.\n"
"If the PCB has many SMD pads with rectangular pads,\n"
"disable the Rectangular aperture."
msgstr ""
"The type of pads shape to be processed.\n"
"If the PCB has many SMD pads with rectangular pads,\n"
"disable the Rectangular aperture."

#: AppGUI/preferences/tools/Tools2EDrillsPrefGroupUI.py:54
#: AppGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:54
#: AppTools/ToolExtractDrills.py:80 AppTools/ToolPunchGerber.py:91
msgid "Process Circular Pads."
msgstr "Process Circular Pads."

#: AppGUI/preferences/tools/Tools2EDrillsPrefGroupUI.py:60
#: AppGUI/preferences/tools/Tools2EDrillsPrefGroupUI.py:162
#: AppGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:60
#: AppGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:164
#: AppTools/ToolExtractDrills.py:86 AppTools/ToolExtractDrills.py:214
#: AppTools/ToolPunchGerber.py:97 AppTools/ToolPunchGerber.py:242
msgid "Oblong"
msgstr "Oblong"

#: AppGUI/preferences/tools/Tools2EDrillsPrefGroupUI.py:62
#: AppGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:62
#: AppTools/ToolExtractDrills.py:88 AppTools/ToolPunchGerber.py:99
msgid "Process Oblong Pads."
msgstr "Process Oblong Pads."

#: AppGUI/preferences/tools/Tools2EDrillsPrefGroupUI.py:70
#: AppGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:70
#: AppTools/ToolExtractDrills.py:96 AppTools/ToolPunchGerber.py:107
msgid "Process Square Pads."
msgstr "Process Square Pads."

#: AppGUI/preferences/tools/Tools2EDrillsPrefGroupUI.py:78
#: AppGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:78
#: AppTools/ToolExtractDrills.py:104 AppTools/ToolPunchGerber.py:115
msgid "Process Rectangular Pads."
msgstr "Process Rectangular Pads."

#: AppGUI/preferences/tools/Tools2EDrillsPrefGroupUI.py:84
#: AppGUI/preferences/tools/Tools2EDrillsPrefGroupUI.py:201
#: AppGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:84
#: AppGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:203
#: AppTools/ToolExtractDrills.py:110 AppTools/ToolExtractDrills.py:253
#: AppTools/ToolProperties.py:172 AppTools/ToolPunchGerber.py:121
#: AppTools/ToolPunchGerber.py:281
msgid "Others"
msgstr "Others"

#: AppGUI/preferences/tools/Tools2EDrillsPrefGroupUI.py:86
#: AppGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:86
#: AppTools/ToolExtractDrills.py:112 AppTools/ToolPunchGerber.py:123
msgid "Process pads not in the categories above."
msgstr "Process pads not in the categories above."

#: AppGUI/preferences/tools/Tools2EDrillsPrefGroupUI.py:99
#: AppGUI/preferences/tools/Tools2EDrillsPrefGroupUI.py:123
#: AppGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:100
#: AppGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:125
#: AppTools/ToolExtractDrills.py:139 AppTools/ToolExtractDrills.py:156
#: AppTools/ToolPunchGerber.py:150 AppTools/ToolPunchGerber.py:184
msgid "Fixed Diameter"
msgstr "Fixed Diameter"

#: AppGUI/preferences/tools/Tools2EDrillsPrefGroupUI.py:100
#: AppGUI/preferences/tools/Tools2EDrillsPrefGroupUI.py:140
#: AppGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:101
#: AppGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:142
#: AppTools/ToolExtractDrills.py:140 AppTools/ToolExtractDrills.py:192
#: AppTools/ToolPunchGerber.py:151 AppTools/ToolPunchGerber.py:214
msgid "Fixed Annular Ring"
msgstr "Fixed Annular Ring"

#: AppGUI/preferences/tools/Tools2EDrillsPrefGroupUI.py:101
#: AppGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:102
#: AppTools/ToolExtractDrills.py:141 AppTools/ToolPunchGerber.py:152
msgid "Proportional"
msgstr "Proportional"

#: AppGUI/preferences/tools/Tools2EDrillsPrefGroupUI.py:107
#: AppTools/ToolExtractDrills.py:130
msgid ""
"The method for processing pads. Can be:\n"
"- Fixed Diameter -> all holes will have a set size\n"
"- Fixed Annular Ring -> all holes will have a set annular ring\n"
"- Proportional -> each hole size will be a fraction of the pad size"
msgstr ""
"The method for processing pads. Can be:\n"
"- Fixed Diameter -> all holes will have a set size\n"
"- Fixed Annular Ring -> all holes will have a set annular ring\n"
"- Proportional -> each hole size will be a fraction of the pad size"

#: AppGUI/preferences/tools/Tools2EDrillsPrefGroupUI.py:131
#: AppGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:133
#: AppGUI/preferences/tools/ToolsTransformPrefGroupUI.py:220
#: AppTools/ToolExtractDrills.py:164 AppTools/ToolExtractDrills.py:285
#: AppTools/ToolPunchGerber.py:192 AppTools/ToolPunchGerber.py:308
#: AppTools/ToolTransform.py:357 App_Main.py:9852
msgid "Value"
msgstr "Value"

#: AppGUI/preferences/tools/Tools2EDrillsPrefGroupUI.py:133
#: AppGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:135
#: AppTools/ToolExtractDrills.py:166 AppTools/ToolPunchGerber.py:194
msgid "Fixed hole diameter."
msgstr "Fixed hole diameter."

#: AppGUI/preferences/tools/Tools2EDrillsPrefGroupUI.py:142
#: AppGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:144
#: AppTools/ToolExtractDrills.py:194 AppTools/ToolPunchGerber.py:216
msgid ""
"The size of annular ring.\n"
"The copper sliver between the hole exterior\n"
"and the margin of the copper pad."
msgstr ""
"The size of annular ring.\n"
"The copper sliver between the hole exterior\n"
"and the margin of the copper pad."

#: AppGUI/preferences/tools/Tools2EDrillsPrefGroupUI.py:151
#: AppGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:153
#: AppTools/ToolExtractDrills.py:203 AppTools/ToolPunchGerber.py:231
msgid "The size of annular ring for circular pads."
msgstr "The size of annular ring for circular pads."

#: AppGUI/preferences/tools/Tools2EDrillsPrefGroupUI.py:164
#: AppGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:166
#: AppTools/ToolExtractDrills.py:216 AppTools/ToolPunchGerber.py:244
msgid "The size of annular ring for oblong pads."
msgstr "The size of annular ring for oblong pads."

#: AppGUI/preferences/tools/Tools2EDrillsPrefGroupUI.py:177
#: AppGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:179
#: AppTools/ToolExtractDrills.py:229 AppTools/ToolPunchGerber.py:257
msgid "The size of annular ring for square pads."
msgstr "The size of annular ring for square pads."

#: AppGUI/preferences/tools/Tools2EDrillsPrefGroupUI.py:190
#: AppGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:192
#: AppTools/ToolExtractDrills.py:242 AppTools/ToolPunchGerber.py:270
msgid "The size of annular ring for rectangular pads."
msgstr "The size of annular ring for rectangular pads."

#: AppGUI/preferences/tools/Tools2EDrillsPrefGroupUI.py:203
#: AppGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:205
#: AppTools/ToolExtractDrills.py:255 AppTools/ToolPunchGerber.py:283
msgid "The size of annular ring for other pads."
msgstr "The size of annular ring for other pads."

#: AppGUI/preferences/tools/Tools2EDrillsPrefGroupUI.py:213
#: AppGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:215
#: AppTools/ToolExtractDrills.py:276 AppTools/ToolPunchGerber.py:299
msgid "Proportional Diameter"
msgstr "Proportional Diameter"

#: AppGUI/preferences/tools/Tools2EDrillsPrefGroupUI.py:222
#: AppGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:224
msgid "Factor"
msgstr "Factor"

#: AppGUI/preferences/tools/Tools2EDrillsPrefGroupUI.py:224
#: AppGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:226
#: AppTools/ToolExtractDrills.py:287 AppTools/ToolPunchGerber.py:310
msgid ""
"Proportional Diameter.\n"
"The hole diameter will be a fraction of the pad size."
msgstr ""
"Proportional Diameter.\n"
"The hole diameter will be a fraction of the pad size."

#: AppGUI/preferences/tools/Tools2FiducialsPrefGroupUI.py:27
msgid "Fiducials Tool Options"
msgstr "Fiducials Tool Options"

#: AppGUI/preferences/tools/Tools2FiducialsPrefGroupUI.py:45
#: AppTools/ToolFiducials.py:158
msgid ""
"This set the fiducial diameter if fiducial type is circular,\n"
"otherwise is the size of the fiducial.\n"
"The soldermask opening is double than that."
msgstr ""
"This set the fiducial diameter if fiducial type is circular,\n"
"otherwise is the size of the fiducial.\n"
"The soldermask opening is double than that."

#: AppGUI/preferences/tools/Tools2FiducialsPrefGroupUI.py:73
#: AppTools/ToolFiducials.py:186
msgid "Auto"
msgstr "Auto"

#: AppGUI/preferences/tools/Tools2FiducialsPrefGroupUI.py:74
#: AppTools/ToolFiducials.py:187
msgid "Manual"
msgstr "Manual"

#: AppGUI/preferences/tools/Tools2FiducialsPrefGroupUI.py:76
#: AppTools/ToolFiducials.py:189
msgid "Mode:"
msgstr "Mode:"

#: AppGUI/preferences/tools/Tools2FiducialsPrefGroupUI.py:78
msgid ""
"- 'Auto' - automatic placement of fiducials in the corners of the bounding "
"box.\n"
"- 'Manual' - manual placement of fiducials."
msgstr ""
"- 'Auto' - automatic placement of fiducials in the corners of the bounding "
"box.\n"
"- 'Manual' - manual placement of fiducials."

#: AppGUI/preferences/tools/Tools2FiducialsPrefGroupUI.py:86
#: AppTools/ToolFiducials.py:199
msgid "Up"
msgstr "Up"

#: AppGUI/preferences/tools/Tools2FiducialsPrefGroupUI.py:87
#: AppTools/ToolFiducials.py:200
msgid "Down"
msgstr "Down"

#: AppGUI/preferences/tools/Tools2FiducialsPrefGroupUI.py:90
#: AppTools/ToolFiducials.py:203
msgid "Second fiducial"
msgstr "Second fiducial"

#: AppGUI/preferences/tools/Tools2FiducialsPrefGroupUI.py:92
#: AppTools/ToolFiducials.py:205
msgid ""
"The position for the second fiducial.\n"
"- 'Up' - the order is: bottom-left, top-left, top-right.\n"
"- 'Down' - the order is: bottom-left, bottom-right, top-right.\n"
"- 'None' - there is no second fiducial. The order is: bottom-left, top-right."
msgstr ""
"The position for the second fiducial.\n"
"- 'Up' - the order is: bottom-left, top-left, top-right.\n"
"- 'Down' - the order is: bottom-left, bottom-right, top-right.\n"
"- 'None' - there is no second fiducial. The order is: bottom-left, top-right."

#: AppGUI/preferences/tools/Tools2FiducialsPrefGroupUI.py:108
#: AppTools/ToolFiducials.py:221
msgid "Cross"
msgstr "Cross"

#: AppGUI/preferences/tools/Tools2FiducialsPrefGroupUI.py:109
#: AppTools/ToolFiducials.py:222
msgid "Chess"
msgstr "Chess"

#: AppGUI/preferences/tools/Tools2FiducialsPrefGroupUI.py:112
#: AppTools/ToolFiducials.py:224
msgid "Fiducial Type"
msgstr "Fiducial Type"

#: AppGUI/preferences/tools/Tools2FiducialsPrefGroupUI.py:114
#: AppTools/ToolFiducials.py:226
msgid ""
"The type of fiducial.\n"
"- 'Circular' - this is the regular fiducial.\n"
"- 'Cross' - cross lines fiducial.\n"
"- 'Chess' - chess pattern fiducial."
msgstr ""
"The type of fiducial.\n"
"- 'Circular' - this is the regular fiducial.\n"
"- 'Cross' - cross lines fiducial.\n"
"- 'Chess' - chess pattern fiducial."

#: AppGUI/preferences/tools/Tools2FiducialsPrefGroupUI.py:123
#: AppTools/ToolFiducials.py:235
msgid "Line thickness"
msgstr "Line thickness"

#: AppGUI/preferences/tools/Tools2InvertPrefGroupUI.py:27
msgid "Invert Gerber Tool Options"
msgstr "Invert Gerber Tool Options"

#: AppGUI/preferences/tools/Tools2InvertPrefGroupUI.py:33
msgid ""
"A tool to invert Gerber geometry from positive to negative\n"
"and in revers."
msgstr ""
"A tool to invert Gerber geometry from positive to negative\n"
"and in revers."

#: AppGUI/preferences/tools/Tools2InvertPrefGroupUI.py:47
#: AppTools/ToolInvertGerber.py:90
msgid ""
"Distance by which to avoid\n"
"the edges of the Gerber object."
msgstr ""
"Distance by which to avoid\n"
"the edges of the Gerber object."

#: AppGUI/preferences/tools/Tools2InvertPrefGroupUI.py:58
#: AppTools/ToolInvertGerber.py:101
msgid "Lines Join Style"
msgstr "Lines Join Style"

#: AppGUI/preferences/tools/Tools2InvertPrefGroupUI.py:60
#: AppTools/ToolInvertGerber.py:103
msgid ""
"The way that the lines in the object outline will be joined.\n"
"Can be:\n"
"- rounded -> an arc is added between two joining lines\n"
"- square -> the lines meet in 90 degrees angle\n"
"- bevel -> the lines are joined by a third line"
msgstr ""
"The way that the lines in the object outline will be joined.\n"
"Can be:\n"
"- rounded -> an arc is added between two joining lines\n"
"- square -> the lines meet in 90 degrees angle\n"
"- bevel -> the lines are joined by a third line"

#: AppGUI/preferences/tools/Tools2OptimalPrefGroupUI.py:27
msgid "Optimal Tool Options"
msgstr "Optimal Tool Options"

#: AppGUI/preferences/tools/Tools2OptimalPrefGroupUI.py:33
msgid ""
"A tool to find the minimum distance between\n"
"every two Gerber geometric elements"
msgstr ""
"A tool to find the minimum distance between\n"
"every two Gerber geometric elements"

#: AppGUI/preferences/tools/Tools2OptimalPrefGroupUI.py:48
#: AppTools/ToolOptimal.py:78
msgid "Precision"
msgstr "Precision"

#: AppGUI/preferences/tools/Tools2OptimalPrefGroupUI.py:50
msgid "Number of decimals for the distances and coordinates in this tool."
msgstr "Number of decimals for the distances and coordinates in this tool."

#: AppGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:27
msgid "Punch Gerber Options"
msgstr "Punch Gerber Options"

#: AppGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:108
#: AppTools/ToolPunchGerber.py:141
msgid ""
"The punch hole source can be:\n"
"- Excellon Object-> the Excellon object drills center will serve as "
"reference.\n"
"- Fixed Diameter -> will try to use the pads center as reference adding "
"fixed diameter holes.\n"
"- Fixed Annular Ring -> will try to keep a set annular ring.\n"
"- Proportional -> will make a Gerber punch hole having the diameter a "
"percentage of the pad diameter."
msgstr ""
"The punch hole source can be:\n"
"- Excellon Object-> the Excellon object drills center will serve as "
"reference.\n"
"- Fixed Diameter -> will try to use the pads center as reference adding "
"fixed diameter holes.\n"
"- Fixed Annular Ring -> will try to keep a set annular ring.\n"
"- Proportional -> will make a Gerber punch hole having the diameter a "
"percentage of the pad diameter."

#: AppGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:27
msgid "QRCode Tool Options"
msgstr "QRCode Tool Options"

#: AppGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:33
msgid ""
"A tool to create a QRCode that can be inserted\n"
"into a selected Gerber file, or it can be exported as a file."
msgstr ""
"A tool to create a QRCode that can be inserted\n"
"into a selected Gerber file, or it can be exported as a file."

#: AppGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:45
#: AppTools/ToolQRCode.py:100
msgid "Version"
msgstr "Version"

#: AppGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:47
#: AppTools/ToolQRCode.py:102
msgid ""
"QRCode version can have values from 1 (21x21 boxes)\n"
"to 40 (177x177 boxes)."
msgstr ""
"QRCode version can have values from 1 (21x21 boxes)\n"
"to 40 (177x177 boxes)."

#: AppGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:58
#: AppTools/ToolQRCode.py:113
msgid "Error correction"
msgstr "Error correction"

#: AppGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:60
#: AppGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:71
#: AppTools/ToolQRCode.py:115 AppTools/ToolQRCode.py:126
#, python-format
msgid ""
"Parameter that controls the error correction used for the QR Code.\n"
"L = maximum 7%% errors can be corrected\n"
"M = maximum 15%% errors can be corrected\n"
"Q = maximum 25%% errors can be corrected\n"
"H = maximum 30%% errors can be corrected."
msgstr ""
"Parameter that controls the error correction used for the QR Code.\n"
"L = maximum 7%% errors can be corrected\n"
"M = maximum 15%% errors can be corrected\n"
"Q = maximum 25%% errors can be corrected\n"
"H = maximum 30%% errors can be corrected."

#: AppGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:81
#: AppTools/ToolQRCode.py:136
msgid "Box Size"
msgstr "Box Size"

#: AppGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:83
#: AppTools/ToolQRCode.py:138
msgid ""
"Box size control the overall size of the QRcode\n"
"by adjusting the size of each box in the code."
msgstr ""
"Box size control the overall size of the QRcode\n"
"by adjusting the size of each box in the code."

#: AppGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:94
#: AppTools/ToolQRCode.py:149
msgid "Border Size"
msgstr "Border Size"

#: AppGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:96
#: AppTools/ToolQRCode.py:151
msgid ""
"Size of the QRCode border. How many boxes thick is the border.\n"
"Default value is 4. The width of the clearance around the QRCode."
msgstr ""
"Size of the QRCode border. How many boxes thick is the border.\n"
"Default value is 4. The width of the clearance around the QRCode."

#: AppGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:107
#: AppTools/ToolQRCode.py:162
msgid "QRCode Data"
msgstr "QRCode Data"

#: AppGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:109
#: AppTools/ToolQRCode.py:164
msgid "QRCode Data. Alphanumeric text to be encoded in the QRCode."
msgstr "QRCode Data. Alphanumeric text to be encoded in the QRCode."

#: AppGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:113
#: AppTools/ToolQRCode.py:168
msgid "Add here the text to be included in the QRCode..."
msgstr "Add here the text to be included in the QRCode..."

#: AppGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:119
#: AppTools/ToolQRCode.py:174
msgid "Polarity"
msgstr "Polarity"

#: AppGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:121
#: AppTools/ToolQRCode.py:176
msgid ""
"Choose the polarity of the QRCode.\n"
"It can be drawn in a negative way (squares are clear)\n"
"or in a positive way (squares are opaque)."
msgstr ""
"Choose the polarity of the QRCode.\n"
"It can be drawn in a negative way (squares are clear)\n"
"or in a positive way (squares are opaque)."

#: AppGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:125
#: AppTools/ToolFilm.py:279 AppTools/ToolQRCode.py:180
msgid "Negative"
msgstr "Negative"

#: AppGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:126
#: AppTools/ToolFilm.py:278 AppTools/ToolQRCode.py:181
msgid "Positive"
msgstr "Positive"

#: AppGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:128
#: AppTools/ToolQRCode.py:183
msgid ""
"Choose the type of QRCode to be created.\n"
"If added on a Silkscreen Gerber file the QRCode may\n"
"be added as positive. If it is added to a Copper Gerber\n"
"file then perhaps the QRCode can be added as negative."
msgstr ""
"Choose the type of QRCode to be created.\n"
"If added on a Silkscreen Gerber file the QRCode may\n"
"be added as positive. If it is added to a Copper Gerber\n"
"file then perhaps the QRCode can be added as negative."

#: AppGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:139
#: AppGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:145
#: AppTools/ToolQRCode.py:194 AppTools/ToolQRCode.py:200
msgid ""
"The bounding box, meaning the empty space that surrounds\n"
"the QRCode geometry, can have a rounded or a square shape."
msgstr ""
"The bounding box, meaning the empty space that surrounds\n"
"the QRCode geometry, can have a rounded or a square shape."

#: AppGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:142
#: AppGUI/preferences/tools/ToolsTransformPrefGroupUI.py:239
#: AppTools/ToolQRCode.py:197 AppTools/ToolTransform.py:383
msgid "Rounded"
msgstr "Rounded"

#: AppGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:152
#: AppTools/ToolQRCode.py:228
msgid "Fill Color"
msgstr "Fill Color"

#: AppGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:154
#: AppTools/ToolQRCode.py:230
msgid "Set the QRCode fill color (squares color)."
msgstr "Set the QRCode fill color (squares color)."

#: AppGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:173
#: AppTools/ToolQRCode.py:252
msgid "Back Color"
msgstr "Back Color"

#: AppGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:175
#: AppTools/ToolQRCode.py:254
msgid "Set the QRCode background color."
msgstr "Set the QRCode background color."

#: AppGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:27
msgid "Check Rules Tool Options"
msgstr "Check Rules Tool Options"

#: AppGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:32
msgid ""
"A tool to check if Gerber files are within a set\n"
"of Manufacturing Rules."
msgstr ""
"A tool to check if Gerber files are within a set\n"
"of Manufacturing Rules."

#: AppGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:42
#: AppTools/ToolRulesCheck.py:265 AppTools/ToolRulesCheck.py:929
msgid "Trace Size"
msgstr "Trace Size"

#: AppGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:44
#: AppTools/ToolRulesCheck.py:267
msgid "This checks if the minimum size for traces is met."
msgstr "This checks if the minimum size for traces is met."

#: AppGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:54
#: AppGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:74
#: AppGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:94
#: AppGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:114
#: AppGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:134
#: AppGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:154
#: AppGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:174
#: AppGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:194
#: AppGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:216
#: AppGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:236
#: AppTools/ToolRulesCheck.py:277 AppTools/ToolRulesCheck.py:299
#: AppTools/ToolRulesCheck.py:322 AppTools/ToolRulesCheck.py:345
#: AppTools/ToolRulesCheck.py:368 AppTools/ToolRulesCheck.py:391
#: AppTools/ToolRulesCheck.py:414 AppTools/ToolRulesCheck.py:437
#: AppTools/ToolRulesCheck.py:462 AppTools/ToolRulesCheck.py:485
msgid "Min value"
msgstr "Min value"

#: AppGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:56
#: AppTools/ToolRulesCheck.py:279
msgid "Minimum acceptable trace size."
msgstr "Minimum acceptable trace size."

#: AppGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:61
#: AppTools/ToolRulesCheck.py:286 AppTools/ToolRulesCheck.py:1157
#: AppTools/ToolRulesCheck.py:1187
msgid "Copper to Copper clearance"
msgstr "Copper to Copper clearance"

#: AppGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:63
#: AppTools/ToolRulesCheck.py:288
msgid ""
"This checks if the minimum clearance between copper\n"
"features is met."
msgstr ""
"This checks if the minimum clearance between copper\n"
"features is met."

#: AppGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:76
#: AppGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:96
#: AppGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:116
#: AppGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:136
#: AppGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:156
#: AppGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:176
#: AppGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:238
#: AppTools/ToolRulesCheck.py:301 AppTools/ToolRulesCheck.py:324
#: AppTools/ToolRulesCheck.py:347 AppTools/ToolRulesCheck.py:370
#: AppTools/ToolRulesCheck.py:393 AppTools/ToolRulesCheck.py:416
#: AppTools/ToolRulesCheck.py:464
msgid "Minimum acceptable clearance value."
msgstr "Minimum acceptable clearance value."

#: AppGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:81
#: AppTools/ToolRulesCheck.py:309 AppTools/ToolRulesCheck.py:1217
#: AppTools/ToolRulesCheck.py:1223 AppTools/ToolRulesCheck.py:1236
#: AppTools/ToolRulesCheck.py:1243
msgid "Copper to Outline clearance"
msgstr "Copper to Outline clearance"

#: AppGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:83
#: AppTools/ToolRulesCheck.py:311
msgid ""
"This checks if the minimum clearance between copper\n"
"features and the outline is met."
msgstr ""
"This checks if the minimum clearance between copper\n"
"features and the outline is met."

#: AppGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:101
#: AppTools/ToolRulesCheck.py:332
msgid "Silk to Silk Clearance"
msgstr "Silk to Silk Clearance"

#: AppGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:103
#: AppTools/ToolRulesCheck.py:334
msgid ""
"This checks if the minimum clearance between silkscreen\n"
"features and silkscreen features is met."
msgstr ""
"This checks if the minimum clearance between silkscreen\n"
"features and silkscreen features is met."

#: AppGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:121
#: AppTools/ToolRulesCheck.py:355 AppTools/ToolRulesCheck.py:1326
#: AppTools/ToolRulesCheck.py:1332 AppTools/ToolRulesCheck.py:1350
msgid "Silk to Solder Mask Clearance"
msgstr "Silk to Solder Mask Clearance"

#: AppGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:123
#: AppTools/ToolRulesCheck.py:357
msgid ""
"This checks if the minimum clearance between silkscreen\n"
"features and soldermask features is met."
msgstr ""
"This checks if the minimum clearance between silkscreen\n"
"features and soldermask features is met."

#: AppGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:141
#: AppTools/ToolRulesCheck.py:378 AppTools/ToolRulesCheck.py:1380
#: AppTools/ToolRulesCheck.py:1386 AppTools/ToolRulesCheck.py:1400
#: AppTools/ToolRulesCheck.py:1407
msgid "Silk to Outline Clearance"
msgstr "Silk to Outline Clearance"

#: AppGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:143
#: AppTools/ToolRulesCheck.py:380
msgid ""
"This checks if the minimum clearance between silk\n"
"features and the outline is met."
msgstr ""
"This checks if the minimum clearance between silk\n"
"features and the outline is met."

#: AppGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:161
#: AppTools/ToolRulesCheck.py:401 AppTools/ToolRulesCheck.py:1418
#: AppTools/ToolRulesCheck.py:1445
msgid "Minimum Solder Mask Sliver"
msgstr "Minimum Solder Mask Sliver"

#: AppGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:163
#: AppTools/ToolRulesCheck.py:403
msgid ""
"This checks if the minimum clearance between soldermask\n"
"features and soldermask features is met."
msgstr ""
"This checks if the minimum clearance between soldermask\n"
"features and soldermask features is met."

#: AppGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:181
#: AppTools/ToolRulesCheck.py:424 AppTools/ToolRulesCheck.py:1483
#: AppTools/ToolRulesCheck.py:1489 AppTools/ToolRulesCheck.py:1505
#: AppTools/ToolRulesCheck.py:1512
msgid "Minimum Annular Ring"
msgstr "Minimum Annular Ring"

#: AppGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:183
#: AppTools/ToolRulesCheck.py:426
msgid ""
"This checks if the minimum copper ring left by drilling\n"
"a hole into a pad is met."
msgstr ""
"This checks if the minimum copper ring left by drilling\n"
"a hole into a pad is met."

#: AppGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:196
#: AppTools/ToolRulesCheck.py:439
msgid "Minimum acceptable ring value."
msgstr "Minimum acceptable ring value."

#: AppGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:203
#: AppTools/ToolRulesCheck.py:449 AppTools/ToolRulesCheck.py:873
msgid "Hole to Hole Clearance"
msgstr "Hole to Hole Clearance"

#: AppGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:205
#: AppTools/ToolRulesCheck.py:451
msgid ""
"This checks if the minimum clearance between a drill hole\n"
"and another drill hole is met."
msgstr ""
"This checks if the minimum clearance between a drill hole\n"
"and another drill hole is met."

#: AppGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:218
#: AppTools/ToolRulesCheck.py:487
msgid "Minimum acceptable drill size."
msgstr "Minimum acceptable drill size."

#: AppGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:223
#: AppTools/ToolRulesCheck.py:472 AppTools/ToolRulesCheck.py:847
msgid "Hole Size"
msgstr "Hole Size"

#: AppGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:225
#: AppTools/ToolRulesCheck.py:474
msgid ""
"This checks if the drill holes\n"
"sizes are above the threshold."
msgstr ""
"This checks if the drill holes\n"
"sizes are above the threshold."

#: AppGUI/preferences/tools/Tools2sidedPrefGroupUI.py:27
msgid "2Sided Tool Options"
msgstr "2Sided Tool Options"

#: AppGUI/preferences/tools/Tools2sidedPrefGroupUI.py:33
msgid ""
"A tool to help in creating a double sided\n"
"PCB using alignment holes."
msgstr ""
"A tool to help in creating a double sided\n"
"PCB using alignment holes."

#: AppGUI/preferences/tools/Tools2sidedPrefGroupUI.py:47
msgid "Drill dia"
msgstr "Drill dia"

#: AppGUI/preferences/tools/Tools2sidedPrefGroupUI.py:49
#: AppTools/ToolDblSided.py:363 AppTools/ToolDblSided.py:368
msgid "Diameter of the drill for the alignment holes."
msgstr "Diameter of the drill for the alignment holes."

#: AppGUI/preferences/tools/Tools2sidedPrefGroupUI.py:56
#: AppTools/ToolDblSided.py:377
msgid "Align Axis"
msgstr "Align Axis"

#: AppGUI/preferences/tools/Tools2sidedPrefGroupUI.py:58
#: AppGUI/preferences/tools/Tools2sidedPrefGroupUI.py:71
#: AppTools/ToolDblSided.py:165 AppTools/ToolDblSided.py:379
msgid "Mirror vertically (X) or horizontally (Y)."
msgstr "Mirror vertically (X) or horizontally (Y)."

#: AppGUI/preferences/tools/Tools2sidedPrefGroupUI.py:69
msgid "Mirror Axis:"
msgstr "Mirror Axis:"

#: AppGUI/preferences/tools/Tools2sidedPrefGroupUI.py:80
#: AppTools/ToolDblSided.py:181
msgid "Point"
msgstr "Point"

#: AppGUI/preferences/tools/Tools2sidedPrefGroupUI.py:81
#: AppTools/ToolDblSided.py:182
msgid "Box"
msgstr "Box"

#: AppGUI/preferences/tools/Tools2sidedPrefGroupUI.py:82
msgid "Axis Ref"
msgstr "Axis Ref"

#: AppGUI/preferences/tools/Tools2sidedPrefGroupUI.py:84
msgid ""
"The axis should pass through a <b>point</b> or cut\n"
" a specified <b>box</b> (in a FlatCAM object) through \n"
"the center."
msgstr ""
"The axis should pass through a <b>point</b> or cut\n"
" a specified <b>box</b> (in a FlatCAM object) through \n"
"the center."

#: AppGUI/preferences/tools/ToolsCalculatorsPrefGroupUI.py:27
msgid "Calculators Tool Options"
msgstr "Calculators Tool Options"

#: AppGUI/preferences/tools/ToolsCalculatorsPrefGroupUI.py:31
#: AppTools/ToolCalculators.py:25
msgid "V-Shape Tool Calculator"
msgstr "V-Shape Tool Calculator"

#: AppGUI/preferences/tools/ToolsCalculatorsPrefGroupUI.py:33
msgid ""
"Calculate the tool diameter for a given V-shape tool,\n"
"having the tip diameter, tip angle and\n"
"depth-of-cut as parameters."
msgstr ""
"Calculate the tool diameter for a given V-shape tool,\n"
"having the tip diameter, tip angle and\n"
"depth-of-cut as parameters."

#: AppGUI/preferences/tools/ToolsCalculatorsPrefGroupUI.py:50
#: AppTools/ToolCalculators.py:94
msgid "Tip Diameter"
msgstr "Tip Diameter"

#: AppGUI/preferences/tools/ToolsCalculatorsPrefGroupUI.py:52
#: AppTools/ToolCalculators.py:102
msgid ""
"This is the tool tip diameter.\n"
"It is specified by manufacturer."
msgstr ""
"This is the tool tip diameter.\n"
"It is specified by manufacturer."

#: AppGUI/preferences/tools/ToolsCalculatorsPrefGroupUI.py:64
#: AppTools/ToolCalculators.py:105
msgid "Tip Angle"
msgstr "Tip Angle"

#: AppGUI/preferences/tools/ToolsCalculatorsPrefGroupUI.py:66
msgid ""
"This is the angle on the tip of the tool.\n"
"It is specified by manufacturer."
msgstr ""
"This is the angle on the tip of the tool.\n"
"It is specified by manufacturer."

#: AppGUI/preferences/tools/ToolsCalculatorsPrefGroupUI.py:80
msgid ""
"This is depth to cut into material.\n"
"In the CNCJob object it is the CutZ parameter."
msgstr ""
"This is depth to cut into material.\n"
"In the CNCJob object it is the CutZ parameter."

#: AppGUI/preferences/tools/ToolsCalculatorsPrefGroupUI.py:87
#: AppTools/ToolCalculators.py:27
msgid "ElectroPlating Calculator"
msgstr "ElectroPlating Calculator"

#: AppGUI/preferences/tools/ToolsCalculatorsPrefGroupUI.py:89
#: AppTools/ToolCalculators.py:158
msgid ""
"This calculator is useful for those who plate the via/pad/drill holes,\n"
"using a method like graphite ink or calcium hypophosphite ink or palladium "
"chloride."
msgstr ""
"This calculator is useful for those who plate the via/pad/drill holes,\n"
"using a method like graphite ink or calcium hypophosphite ink or palladium "
"chloride."

#: AppGUI/preferences/tools/ToolsCalculatorsPrefGroupUI.py:100
#: AppTools/ToolCalculators.py:167
msgid "Board Length"
msgstr "Board Length"

#: AppGUI/preferences/tools/ToolsCalculatorsPrefGroupUI.py:102
#: AppTools/ToolCalculators.py:173
msgid "This is the board length. In centimeters."
msgstr "This is the board length. In centimeters."

#: AppGUI/preferences/tools/ToolsCalculatorsPrefGroupUI.py:112
#: AppTools/ToolCalculators.py:175
msgid "Board Width"
msgstr "Board Width"

#: AppGUI/preferences/tools/ToolsCalculatorsPrefGroupUI.py:114
#: AppTools/ToolCalculators.py:181
msgid "This is the board width.In centimeters."
msgstr "This is the board width.In centimeters."

#: AppGUI/preferences/tools/ToolsCalculatorsPrefGroupUI.py:119
#: AppTools/ToolCalculators.py:183
msgid "Current Density"
msgstr "Current Density"

#: AppGUI/preferences/tools/ToolsCalculatorsPrefGroupUI.py:125
#: AppTools/ToolCalculators.py:190
msgid ""
"Current density to pass through the board. \n"
"In Amps per Square Feet ASF."
msgstr ""
"Current density to pass through the board. \n"
"In Amps per Square Feet ASF."

#: AppGUI/preferences/tools/ToolsCalculatorsPrefGroupUI.py:131
#: AppTools/ToolCalculators.py:193
msgid "Copper Growth"
msgstr "Copper Growth"

#: AppGUI/preferences/tools/ToolsCalculatorsPrefGroupUI.py:137
#: AppTools/ToolCalculators.py:200
msgid ""
"How thick the copper growth is intended to be.\n"
"In microns."
msgstr ""
"How thick the copper growth is intended to be.\n"
"In microns."

#: AppGUI/preferences/tools/ToolsCornersPrefGroupUI.py:27
#| msgid "Gerber Options"
msgid "Corner Markers Options"
msgstr "Corner Markers Options"

#: AppGUI/preferences/tools/ToolsCornersPrefGroupUI.py:44
#: AppTools/ToolCorners.py:115
msgid "The thickness of the line that makes the corner marker."
msgstr "The thickness of the line that makes the corner marker."

#: AppGUI/preferences/tools/ToolsCornersPrefGroupUI.py:58
#: AppTools/ToolCorners.py:129
msgid "The length of the line that makes the corner marker."
msgstr "The length of the line that makes the corner marker."

#: AppGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:28
msgid "Cutout Tool Options"
msgstr "Cutout Tool Options"

#: AppGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:43
#: AppTools/ToolCalculators.py:123 AppTools/ToolCutOut.py:129
msgid "Tool Diameter"
msgstr "Tool Diameter"

#: AppGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:45
#: AppTools/ToolCutOut.py:131
msgid ""
"Diameter of the tool used to cutout\n"
"the PCB shape out of the surrounding material."
msgstr ""
"Diameter of the tool used to cutout\n"
"the PCB shape out of the surrounding material."

#: AppGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:100
msgid "Object kind"
msgstr "Object kind"

#: AppGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:102
#: AppTools/ToolCutOut.py:77
msgid ""
"Choice of what kind the object we want to cutout is.<BR>- <B>Single</B>: "
"contain a single PCB Gerber outline object.<BR>- <B>Panel</B>: a panel PCB "
"Gerber object, which is made\n"
"out of many individual PCB outlines."
msgstr ""
"Choice of what kind the object we want to cutout is.<BR>- <B>Single</B>: "
"contain a single PCB Gerber outline object.<BR>- <B>Panel</B>: a panel PCB "
"Gerber object, which is made\n"
"out of many individual PCB outlines."

#: AppGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:109
#: AppTools/ToolCutOut.py:83
msgid "Single"
msgstr "Single"

#: AppGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:110
#: AppTools/ToolCutOut.py:84
msgid "Panel"
msgstr "Panel"

#: AppGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:117
#: AppTools/ToolCutOut.py:192
msgid ""
"Margin over bounds. A positive value here\n"
"will make the cutout of the PCB further from\n"
"the actual PCB border"
msgstr ""
"Margin over bounds. A positive value here\n"
"will make the cutout of the PCB further from\n"
"the actual PCB border"

#: AppGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:130
#: AppTools/ToolCutOut.py:203
msgid "Gap size"
msgstr "Gap size"

#: AppGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:132
#: AppTools/ToolCutOut.py:205
msgid ""
"The size of the bridge gaps in the cutout\n"
"used to keep the board connected to\n"
"the surrounding material (the one \n"
"from which the PCB is cutout)."
msgstr ""
"The size of the bridge gaps in the cutout\n"
"used to keep the board connected to\n"
"the surrounding material (the one \n"
"from which the PCB is cutout)."

#: AppGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:146
#: AppTools/ToolCutOut.py:245
msgid "Gaps"
msgstr "Gaps"

#: AppGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:148
msgid ""
"Number of gaps used for the cutout.\n"
"There can be maximum 8 bridges/gaps.\n"
"The choices are:\n"
"- None  - no gaps\n"
"- lr    - left + right\n"
"- tb    - top + bottom\n"
"- 4     - left + right +top + bottom\n"
"- 2lr   - 2*left + 2*right\n"
"- 2tb  - 2*top + 2*bottom\n"
"- 8     - 2*left + 2*right +2*top + 2*bottom"
msgstr ""
"Number of gaps used for the cutout.\n"
"There can be maximum 8 bridges/gaps.\n"
"The choices are:\n"
"- None  - no gaps\n"
"- lr    - left + right\n"
"- tb    - top + bottom\n"
"- 4     - left + right +top + bottom\n"
"- 2lr   - 2*left + 2*right\n"
"- 2tb  - 2*top + 2*bottom\n"
"- 8     - 2*left + 2*right +2*top + 2*bottom"

#: AppGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:170
#: AppTools/ToolCutOut.py:222
msgid "Convex Shape"
msgstr "Convex Shape"

#: AppGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:172
#: AppTools/ToolCutOut.py:225
msgid ""
"Create a convex shape surrounding the entire PCB.\n"
"Used only if the source object type is Gerber."
msgstr ""
"Create a convex shape surrounding the entire PCB.\n"
"Used only if the source object type is Gerber."

#: AppGUI/preferences/tools/ToolsFilmPrefGroupUI.py:27
msgid "Film Tool Options"
msgstr "Film Tool Options"

#: AppGUI/preferences/tools/ToolsFilmPrefGroupUI.py:33
msgid ""
"Create a PCB film from a Gerber or Geometry\n"
"FlatCAM object.\n"
"The file is saved in SVG format."
msgstr ""
"Create a PCB film from a Gerber or Geometry\n"
"FlatCAM object.\n"
"The file is saved in SVG format."

#: AppGUI/preferences/tools/ToolsFilmPrefGroupUI.py:44
msgid "Film Type"
msgstr "Film Type"

#: AppGUI/preferences/tools/ToolsFilmPrefGroupUI.py:46 AppTools/ToolFilm.py:283
msgid ""
"Generate a Positive black film or a Negative film.\n"
"Positive means that it will print the features\n"
"with black on a white canvas.\n"
"Negative means that it will print the features\n"
"with white on a black canvas.\n"
"The Film format is SVG."
msgstr ""
"Generate a Positive black film or a Negative film.\n"
"Positive means that it will print the features\n"
"with black on a white canvas.\n"
"Negative means that it will print the features\n"
"with white on a black canvas.\n"
"The Film format is SVG."

#: AppGUI/preferences/tools/ToolsFilmPrefGroupUI.py:57
msgid "Film Color"
msgstr "Film Color"

#: AppGUI/preferences/tools/ToolsFilmPrefGroupUI.py:59
msgid "Set the film color when positive film is selected."
msgstr "Set the film color when positive film is selected."

#: AppGUI/preferences/tools/ToolsFilmPrefGroupUI.py:82 AppTools/ToolFilm.py:299
msgid "Border"
msgstr "Border"

#: AppGUI/preferences/tools/ToolsFilmPrefGroupUI.py:84 AppTools/ToolFilm.py:301
msgid ""
"Specify a border around the object.\n"
"Only for negative film.\n"
"It helps if we use as a Box Object the same \n"
"object as in Film Object. It will create a thick\n"
"black bar around the actual print allowing for a\n"
"better delimitation of the outline features which are of\n"
"white color like the rest and which may confound with the\n"
"surroundings if not for this border."
msgstr ""
"Specify a border around the object.\n"
"Only for negative film.\n"
"It helps if we use as a Box Object the same \n"
"object as in Film Object. It will create a thick\n"
"black bar around the actual print allowing for a\n"
"better delimitation of the outline features which are of\n"
"white color like the rest and which may confound with the\n"
"surroundings if not for this border."

#: AppGUI/preferences/tools/ToolsFilmPrefGroupUI.py:101
#: AppTools/ToolFilm.py:266
msgid "Scale Stroke"
msgstr "Scale Stroke"

#: AppGUI/preferences/tools/ToolsFilmPrefGroupUI.py:103
#: AppTools/ToolFilm.py:268
msgid ""
"Scale the line stroke thickness of each feature in the SVG file.\n"
"It means that the line that envelope each SVG feature will be thicker or "
"thinner,\n"
"therefore the fine features may be more affected by this parameter."
msgstr ""
"Scale the line stroke thickness of each feature in the SVG file.\n"
"It means that the line that envelope each SVG feature will be thicker or "
"thinner,\n"
"therefore the fine features may be more affected by this parameter."

#: AppGUI/preferences/tools/ToolsFilmPrefGroupUI.py:110
#: AppTools/ToolFilm.py:124
msgid "Film Adjustments"
msgstr "Film Adjustments"

#: AppGUI/preferences/tools/ToolsFilmPrefGroupUI.py:112
#: AppTools/ToolFilm.py:126
msgid ""
"Sometime the printers will distort the print shape, especially the Laser "
"types.\n"
"This section provide the tools to compensate for the print distortions."
msgstr ""
"Sometime the printers will distort the print shape, especially the Laser "
"types.\n"
"This section provide the tools to compensate for the print distortions."

#: AppGUI/preferences/tools/ToolsFilmPrefGroupUI.py:119
#: AppTools/ToolFilm.py:133
msgid "Scale Film geometry"
msgstr "Scale Film geometry"

#: AppGUI/preferences/tools/ToolsFilmPrefGroupUI.py:121
#: AppTools/ToolFilm.py:135
msgid ""
"A value greater than 1 will stretch the film\n"
"while a value less than 1 will jolt it."
msgstr ""
"A value greater than 1 will stretch the film\n"
"while a value less than 1 will jolt it."

#: AppGUI/preferences/tools/ToolsFilmPrefGroupUI.py:131
#: AppGUI/preferences/tools/ToolsTransformPrefGroupUI.py:103
#: AppTools/ToolFilm.py:145 AppTools/ToolTransform.py:148
msgid "X factor"
msgstr "X factor"

#: AppGUI/preferences/tools/ToolsFilmPrefGroupUI.py:140
#: AppGUI/preferences/tools/ToolsTransformPrefGroupUI.py:116
#: AppTools/ToolFilm.py:154 AppTools/ToolTransform.py:168
msgid "Y factor"
msgstr "Y factor"

#: AppGUI/preferences/tools/ToolsFilmPrefGroupUI.py:150
#: AppTools/ToolFilm.py:172
msgid "Skew Film geometry"
msgstr "Skew Film geometry"

#: AppGUI/preferences/tools/ToolsFilmPrefGroupUI.py:152
#: AppTools/ToolFilm.py:174
msgid ""
"Positive values will skew to the right\n"
"while negative values will skew to the left."
msgstr ""
"Positive values will skew to the right\n"
"while negative values will skew to the left."

#: AppGUI/preferences/tools/ToolsFilmPrefGroupUI.py:162
#: AppGUI/preferences/tools/ToolsTransformPrefGroupUI.py:72
#: AppTools/ToolFilm.py:184 AppTools/ToolTransform.py:97
msgid "X angle"
msgstr "X angle"

#: AppGUI/preferences/tools/ToolsFilmPrefGroupUI.py:171
#: AppGUI/preferences/tools/ToolsTransformPrefGroupUI.py:86
#: AppTools/ToolFilm.py:193 AppTools/ToolTransform.py:118
msgid "Y angle"
msgstr "Y angle"

#: AppGUI/preferences/tools/ToolsFilmPrefGroupUI.py:182
#: AppTools/ToolFilm.py:204
msgid ""
"The reference point to be used as origin for the skew.\n"
"It can be one of the four points of the geometry bounding box."
msgstr ""
"The reference point to be used as origin for the skew.\n"
"It can be one of the four points of the geometry bounding box."

#: AppGUI/preferences/tools/ToolsFilmPrefGroupUI.py:185
#: AppTools/ToolCorners.py:80 AppTools/ToolFiducials.py:87
#: AppTools/ToolFilm.py:207
msgid "Bottom Left"
msgstr "Bottom Left"

#: AppGUI/preferences/tools/ToolsFilmPrefGroupUI.py:186
#: AppTools/ToolCorners.py:88 AppTools/ToolFilm.py:208
msgid "Top Left"
msgstr "Top Left"

#: AppGUI/preferences/tools/ToolsFilmPrefGroupUI.py:187
#: AppTools/ToolCorners.py:84 AppTools/ToolFilm.py:209
msgid "Bottom Right"
msgstr "Bottom Right"

#: AppGUI/preferences/tools/ToolsFilmPrefGroupUI.py:188
#: AppTools/ToolFilm.py:210
msgid "Top right"
msgstr "Top right"

#: AppGUI/preferences/tools/ToolsFilmPrefGroupUI.py:196
#: AppTools/ToolFilm.py:227
msgid "Mirror Film geometry"
msgstr "Mirror Film geometry"

#: AppGUI/preferences/tools/ToolsFilmPrefGroupUI.py:198
#: AppTools/ToolFilm.py:229
msgid "Mirror the film geometry on the selected axis or on both."
msgstr "Mirror the film geometry on the selected axis or on both."

#: AppGUI/preferences/tools/ToolsFilmPrefGroupUI.py:212
#: AppTools/ToolFilm.py:243
msgid "Mirror axis"
msgstr "Mirror axis"

#: AppGUI/preferences/tools/ToolsFilmPrefGroupUI.py:222
#: AppTools/ToolFilm.py:388
msgid "SVG"
msgstr "SVG"

#: AppGUI/preferences/tools/ToolsFilmPrefGroupUI.py:223
#: AppTools/ToolFilm.py:389
msgid "PNG"
msgstr "PNG"

#: AppGUI/preferences/tools/ToolsFilmPrefGroupUI.py:224
#: AppTools/ToolFilm.py:390
msgid "PDF"
msgstr "PDF"

#: AppGUI/preferences/tools/ToolsFilmPrefGroupUI.py:227
#: AppTools/ToolFilm.py:281 AppTools/ToolFilm.py:393
msgid "Film Type:"
msgstr "Film Type:"

#: AppGUI/preferences/tools/ToolsFilmPrefGroupUI.py:229
#: AppTools/ToolFilm.py:395
msgid ""
"The file type of the saved film. Can be:\n"
"- 'SVG' -> open-source vectorial format\n"
"- 'PNG' -> raster image\n"
"- 'PDF' -> portable document format"
msgstr ""
"The file type of the saved film. Can be:\n"
"- 'SVG' -> open-source vectorial format\n"
"- 'PNG' -> raster image\n"
"- 'PDF' -> portable document format"

#: AppGUI/preferences/tools/ToolsFilmPrefGroupUI.py:238
#: AppTools/ToolFilm.py:404
msgid "Page Orientation"
msgstr "Page Orientation"

#: AppGUI/preferences/tools/ToolsFilmPrefGroupUI.py:251
#: AppTools/ToolFilm.py:417
msgid "Page Size"
msgstr "Page Size"

#: AppGUI/preferences/tools/ToolsFilmPrefGroupUI.py:252
#: AppTools/ToolFilm.py:418
msgid "A selection of standard ISO 216 page sizes."
msgstr "A selection of standard ISO 216 page sizes."

#: AppGUI/preferences/tools/ToolsNCCPrefGroupUI.py:27
msgid "NCC Tool Options"
msgstr "NCC Tool Options"

#: AppGUI/preferences/tools/ToolsNCCPrefGroupUI.py:49
#: AppGUI/preferences/tools/ToolsPaintPrefGroupUI.py:57
msgid "Comma separated values"
msgstr "Comma separated values"

#: AppGUI/preferences/tools/ToolsNCCPrefGroupUI.py:55
#: AppGUI/preferences/tools/ToolsNCCPrefGroupUI.py:63
#: AppGUI/preferences/tools/ToolsPaintPrefGroupUI.py:64 AppTools/ToolNCC.py:215
#: AppTools/ToolNCC.py:223 AppTools/ToolPaint.py:197 AppTools/ToolPaint.py:205
msgid ""
"Default tool type:\n"
"- 'V-shape'\n"
"- Circular"
msgstr ""
"Default tool type:\n"
"- 'V-shape'\n"
"- Circular"

#: AppGUI/preferences/tools/ToolsNCCPrefGroupUI.py:60
#: AppGUI/preferences/tools/ToolsPaintPrefGroupUI.py:69 AppTools/ToolNCC.py:220
#: AppTools/ToolPaint.py:202
msgid "V-shape"
msgstr "V-shape"

#: AppGUI/preferences/tools/ToolsNCCPrefGroupUI.py:100
#: AppGUI/preferences/tools/ToolsNCCPrefGroupUI.py:109
#: AppGUI/preferences/tools/ToolsPaintPrefGroupUI.py:107
#: AppGUI/preferences/tools/ToolsPaintPrefGroupUI.py:116
#: AppTools/ToolNCC.py:262 AppTools/ToolNCC.py:271 AppTools/ToolPaint.py:244
#: AppTools/ToolPaint.py:253
msgid ""
"Depth of cut into material. Negative value.\n"
"In FlatCAM units."
msgstr ""
"Depth of cut into material. Negative value.\n"
"In FlatCAM units."

#: AppGUI/preferences/tools/ToolsNCCPrefGroupUI.py:119
#: AppGUI/preferences/tools/ToolsPaintPrefGroupUI.py:125
#: AppTools/ToolNCC.py:280 AppTools/ToolPaint.py:262
msgid ""
"Diameter for the new tool to add in the Tool Table.\n"
"If the tool is V-shape type then this value is automatically\n"
"calculated from the other parameters."
msgstr ""
"Diameter for the new tool to add in the Tool Table.\n"
"If the tool is V-shape type then this value is automatically\n"
"calculated from the other parameters."

#: AppGUI/preferences/tools/ToolsNCCPrefGroupUI.py:156
#: AppGUI/preferences/tools/ToolsPaintPrefGroupUI.py:142
#: AppTools/ToolNCC.py:174 AppTools/ToolPaint.py:157
msgid "Tool order"
msgstr "Tool order"

#: AppGUI/preferences/tools/ToolsNCCPrefGroupUI.py:157
#: AppGUI/preferences/tools/ToolsNCCPrefGroupUI.py:167
#: AppGUI/preferences/tools/ToolsPaintPrefGroupUI.py:143
#: AppTools/ToolNCC.py:175 AppTools/ToolNCC.py:185 AppTools/ToolPaint.py:158
#: AppTools/ToolPaint.py:168
msgid ""
"This set the way that the tools in the tools table are used.\n"
"'No' --> means that the used order is the one in the tool table\n"
"'Forward' --> means that the tools will be ordered from small to big\n"
"'Reverse' --> means that the tools will ordered from big to small\n"
"\n"
"WARNING: using rest machining will automatically set the order\n"
"in reverse and disable this control."
msgstr ""
"This set the way that the tools in the tools table are used.\n"
"'No' --> means that the used order is the one in the tool table\n"
"'Forward' --> means that the tools will be ordered from small to big\n"
"'Reverse' --> means that the tools will ordered from big to small\n"
"\n"
"WARNING: using rest machining will automatically set the order\n"
"in reverse and disable this control."

#: AppGUI/preferences/tools/ToolsNCCPrefGroupUI.py:165
#: AppGUI/preferences/tools/ToolsPaintPrefGroupUI.py:151
#: AppTools/ToolNCC.py:183 AppTools/ToolPaint.py:166
msgid "Forward"
msgstr "Forward"

#: AppGUI/preferences/tools/ToolsNCCPrefGroupUI.py:166
#: AppGUI/preferences/tools/ToolsPaintPrefGroupUI.py:152
#: AppTools/ToolNCC.py:184 AppTools/ToolPaint.py:167
msgid "Reverse"
msgstr "Reverse"

#: AppGUI/preferences/tools/ToolsNCCPrefGroupUI.py:266
msgid "Offset value"
msgstr "Offset value"

#: AppGUI/preferences/tools/ToolsNCCPrefGroupUI.py:268
msgid ""
"If used, it will add an offset to the copper features.\n"
"The copper clearing will finish to a distance\n"
"from the copper features.\n"
"The value can be between 0.0 and 9999.9 FlatCAM units."
msgstr ""
"If used, it will add an offset to the copper features.\n"
"The copper clearing will finish to a distance\n"
"from the copper features.\n"
"The value can be between 0.0 and 9999.9 FlatCAM units."

#: AppGUI/preferences/tools/ToolsNCCPrefGroupUI.py:288
#: AppGUI/preferences/tools/ToolsPaintPrefGroupUI.py:244
#: AppGUI/preferences/tools/ToolsPaintPrefGroupUI.py:245
#: AppTools/ToolNCC.py:512 AppTools/ToolPaint.py:441
msgid "Rest Machining"
msgstr "Rest Machining"

#: AppGUI/preferences/tools/ToolsNCCPrefGroupUI.py:290 AppTools/ToolNCC.py:516
msgid ""
"If checked, use 'rest machining'.\n"
"Basically it will clear copper outside PCB features,\n"
"using the biggest tool and continue with the next tools,\n"
"from bigger to smaller, to clear areas of copper that\n"
"could not be cleared by previous tool, until there is\n"
"no more copper to clear or there are no more tools.\n"
"If not checked, use the standard algorithm."
msgstr ""
"If checked, use 'rest machining'.\n"
"Basically it will clear copper outside PCB features,\n"
"using the biggest tool and continue with the next tools,\n"
"from bigger to smaller, to clear areas of copper that\n"
"could not be cleared by previous tool, until there is\n"
"no more copper to clear or there are no more tools.\n"
"If not checked, use the standard algorithm."

#: AppGUI/preferences/tools/ToolsNCCPrefGroupUI.py:313 AppTools/ToolNCC.py:541
msgid ""
"Selection of area to be processed.\n"
"- 'Itself' - the processing extent is based on the object that is "
"processed.\n"
" - 'Area Selection' - left mouse click to start selection of the area to be "
"processed.\n"
"- 'Reference Object' - will process the area specified by another object."
msgstr ""
"Selection of area to be processed.\n"
"- 'Itself' - the processing extent is based on the object that is "
"processed.\n"
" - 'Area Selection' - left mouse click to start selection of the area to be "
"processed.\n"
"- 'Reference Object' - will process the area specified by another object."

#: AppGUI/preferences/tools/ToolsNCCPrefGroupUI.py:339
#: AppGUI/preferences/tools/ToolsPaintPrefGroupUI.py:303
msgid "Normal"
msgstr "Normal"

#: AppGUI/preferences/tools/ToolsNCCPrefGroupUI.py:340
#: AppGUI/preferences/tools/ToolsPaintPrefGroupUI.py:304
msgid "Progressive"
msgstr "Progressive"

#: AppGUI/preferences/tools/ToolsNCCPrefGroupUI.py:341
msgid "NCC Plotting"
msgstr "NCC Plotting"

#: AppGUI/preferences/tools/ToolsNCCPrefGroupUI.py:343
msgid ""
"- 'Normal' -  normal plotting, done at the end of the NCC job\n"
"- 'Progressive' - after each shape is generated it will be plotted."
msgstr ""
"- 'Normal' -  normal plotting, done at the end of the NCC job\n"
"- 'Progressive' - after each shape is generated it will be plotted."

#: AppGUI/preferences/tools/ToolsPaintPrefGroupUI.py:27
msgid "Paint Tool Options"
msgstr "Paint Tool Options"

#: AppGUI/preferences/tools/ToolsPaintPrefGroupUI.py:33
msgid "<b>Parameters:</b>"
msgstr "<b>Parameters:</b>"

#: AppGUI/preferences/tools/ToolsPaintPrefGroupUI.py:247
#: AppTools/ToolPaint.py:444
msgid ""
"If checked, use 'rest machining'.\n"
"Basically it will clear copper outside PCB features,\n"
"using the biggest tool and continue with the next tools,\n"
"from bigger to smaller, to clear areas of copper that\n"
"could not be cleared by previous tool, until there is\n"
"no more copper to clear or there are no more tools.\n"
"\n"
"If not checked, use the standard algorithm."
msgstr ""
"If checked, use 'rest machining'.\n"
"Basically it will clear copper outside PCB features,\n"
"using the biggest tool and continue with the next tools,\n"
"from bigger to smaller, to clear areas of copper that\n"
"could not be cleared by previous tool, until there is\n"
"no more copper to clear or there are no more tools.\n"
"\n"
"If not checked, use the standard algorithm."

#: AppGUI/preferences/tools/ToolsPaintPrefGroupUI.py:260
#: AppTools/ToolPaint.py:457
msgid ""
"Selection of area to be processed.\n"
"- 'Polygon Selection' - left mouse click to add/remove polygons to be "
"processed.\n"
"- 'Area Selection' - left mouse click to start selection of the area to be "
"processed.\n"
"Keeping a modifier key pressed (CTRL or SHIFT) will allow to add multiple "
"areas.\n"
"- 'All Polygons' - the process will start after click.\n"
"- 'Reference Object' - will process the area specified by another object."
msgstr ""
"Selection of area to be processed.\n"
"- 'Polygon Selection' - left mouse click to add/remove polygons to be "
"processed.\n"
"- 'Area Selection' - left mouse click to start selection of the area to be "
"processed.\n"
"Keeping a modifier key pressed (CTRL or SHIFT) will allow to add multiple "
"areas.\n"
"- 'All Polygons' - the process will start after click.\n"
"- 'Reference Object' - will process the area specified by another object."

#: AppGUI/preferences/tools/ToolsPaintPrefGroupUI.py:280
#: AppTools/ToolPaint.py:485 AppTools/ToolPaint.py:941
#: AppTools/ToolPaint.py:1431 tclCommands/TclCommandPaint.py:164
msgid "Polygon Selection"
msgstr "Polygon Selection"

#: AppGUI/preferences/tools/ToolsPaintPrefGroupUI.py:280
#: AppTools/ToolPaint.py:485 AppTools/ToolPaint.py:1426 defaults.py:433
#: tclCommands/TclCommandPaint.py:162
msgid "All Polygons"
msgstr "All Polygons"

#: AppGUI/preferences/tools/ToolsPaintPrefGroupUI.py:305
msgid "Paint Plotting"
msgstr "Paint Plotting"

#: AppGUI/preferences/tools/ToolsPaintPrefGroupUI.py:307
msgid ""
"- 'Normal' -  normal plotting, done at the end of the Paint job\n"
"- 'Progressive' - after each shape is generated it will be plotted."
msgstr ""
"- 'Normal' -  normal plotting, done at the end of the Paint job\n"
"- 'Progressive' - after each shape is generated it will be plotted."

#: AppGUI/preferences/tools/ToolsPanelizePrefGroupUI.py:27
msgid "Panelize Tool Options"
msgstr "Panelize Tool Options"

#: AppGUI/preferences/tools/ToolsPanelizePrefGroupUI.py:33
msgid ""
"Create an object that contains an array of (x, y) elements,\n"
"each element is a copy of the source object spaced\n"
"at a X distance, Y distance of each other."
msgstr ""
"Create an object that contains an array of (x, y) elements,\n"
"each element is a copy of the source object spaced\n"
"at a X distance, Y distance of each other."

#: AppGUI/preferences/tools/ToolsPanelizePrefGroupUI.py:50
#: AppTools/ToolPanelize.py:165
msgid "Spacing cols"
msgstr "Spacing cols"

#: AppGUI/preferences/tools/ToolsPanelizePrefGroupUI.py:52
#: AppTools/ToolPanelize.py:167
msgid ""
"Spacing between columns of the desired panel.\n"
"In current units."
msgstr ""
"Spacing between columns of the desired panel.\n"
"In current units."

#: AppGUI/preferences/tools/ToolsPanelizePrefGroupUI.py:64
#: AppTools/ToolPanelize.py:177
msgid "Spacing rows"
msgstr "Spacing rows"

#: AppGUI/preferences/tools/ToolsPanelizePrefGroupUI.py:66
#: AppTools/ToolPanelize.py:179
msgid ""
"Spacing between rows of the desired panel.\n"
"In current units."
msgstr ""
"Spacing between rows of the desired panel.\n"
"In current units."

#: AppGUI/preferences/tools/ToolsPanelizePrefGroupUI.py:77
#: AppTools/ToolPanelize.py:188
msgid "Columns"
msgstr "Columns"

#: AppGUI/preferences/tools/ToolsPanelizePrefGroupUI.py:79
#: AppTools/ToolPanelize.py:190
msgid "Number of columns of the desired panel"
msgstr "Number of columns of the desired panel"

#: AppGUI/preferences/tools/ToolsPanelizePrefGroupUI.py:89
#: AppTools/ToolPanelize.py:198
msgid "Rows"
msgstr "Rows"

#: AppGUI/preferences/tools/ToolsPanelizePrefGroupUI.py:91
#: AppTools/ToolPanelize.py:200
msgid "Number of rows of the desired panel"
msgstr "Number of rows of the desired panel"

#: AppGUI/preferences/tools/ToolsPanelizePrefGroupUI.py:98
#: AppTools/ToolPanelize.py:211
msgid "Geo"
msgstr "Geo"

#: AppGUI/preferences/tools/ToolsPanelizePrefGroupUI.py:99
#: AppTools/ToolPanelize.py:212
msgid "Panel Type"
msgstr "Panel Type"

#: AppGUI/preferences/tools/ToolsPanelizePrefGroupUI.py:101
msgid ""
"Choose the type of object for the panel object:\n"
"- Gerber\n"
"- Geometry"
msgstr ""
"Choose the type of object for the panel object:\n"
"- Gerber\n"
"- Geometry"

#: AppGUI/preferences/tools/ToolsPanelizePrefGroupUI.py:110
msgid "Constrain within"
msgstr "Constrain within"

#: AppGUI/preferences/tools/ToolsPanelizePrefGroupUI.py:112
#: AppTools/ToolPanelize.py:224
msgid ""
"Area define by DX and DY within to constrain the panel.\n"
"DX and DY values are in current units.\n"
"Regardless of how many columns and rows are desired,\n"
"the final panel will have as many columns and rows as\n"
"they fit completely within selected area."
msgstr ""
"Area define by DX and DY within to constrain the panel.\n"
"DX and DY values are in current units.\n"
"Regardless of how many columns and rows are desired,\n"
"the final panel will have as many columns and rows as\n"
"they fit completely within selected area."

#: AppGUI/preferences/tools/ToolsPanelizePrefGroupUI.py:125
#: AppTools/ToolPanelize.py:236
msgid "Width (DX)"
msgstr "Width (DX)"

#: AppGUI/preferences/tools/ToolsPanelizePrefGroupUI.py:127
#: AppTools/ToolPanelize.py:238
msgid ""
"The width (DX) within which the panel must fit.\n"
"In current units."
msgstr ""
"The width (DX) within which the panel must fit.\n"
"In current units."

#: AppGUI/preferences/tools/ToolsPanelizePrefGroupUI.py:138
#: AppTools/ToolPanelize.py:247
msgid "Height (DY)"
msgstr "Height (DY)"

#: AppGUI/preferences/tools/ToolsPanelizePrefGroupUI.py:140
#: AppTools/ToolPanelize.py:249
msgid ""
"The height (DY)within which the panel must fit.\n"
"In current units."
msgstr ""
"The height (DY)within which the panel must fit.\n"
"In current units."

#: AppGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:27
msgid "SolderPaste Tool Options"
msgstr "SolderPaste Tool Options"

#: AppGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:33
msgid ""
"A tool to create GCode for dispensing\n"
"solder paste onto a PCB."
msgstr ""
"A tool to create GCode for dispensing\n"
"solder paste onto a PCB."

#: AppGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:54
msgid "New Nozzle Dia"
msgstr "New Nozzle Dia"

#: AppGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:56
#: AppTools/ToolSolderPaste.py:107
msgid "Diameter for the new Nozzle tool to add in the Tool Table"
msgstr "Diameter for the new Nozzle tool to add in the Tool Table"

#: AppGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:72
#: AppTools/ToolSolderPaste.py:183
msgid "Z Dispense Start"
msgstr "Z Dispense Start"

#: AppGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:74
#: AppTools/ToolSolderPaste.py:185
msgid "The height (Z) when solder paste dispensing starts."
msgstr "The height (Z) when solder paste dispensing starts."

#: AppGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:85
#: AppTools/ToolSolderPaste.py:195
msgid "Z Dispense"
msgstr "Z Dispense"

#: AppGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:87
#: AppTools/ToolSolderPaste.py:197
msgid "The height (Z) when doing solder paste dispensing."
msgstr "The height (Z) when doing solder paste dispensing."

#: AppGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:98
#: AppTools/ToolSolderPaste.py:207
msgid "Z Dispense Stop"
msgstr "Z Dispense Stop"

#: AppGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:100
#: AppTools/ToolSolderPaste.py:209
msgid "The height (Z) when solder paste dispensing stops."
msgstr "The height (Z) when solder paste dispensing stops."

#: AppGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:111
#: AppTools/ToolSolderPaste.py:219
msgid "Z Travel"
msgstr "Z Travel"

#: AppGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:113
#: AppTools/ToolSolderPaste.py:221
msgid ""
"The height (Z) for travel between pads\n"
"(without dispensing solder paste)."
msgstr ""
"The height (Z) for travel between pads\n"
"(without dispensing solder paste)."

#: AppGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:125
#: AppTools/ToolSolderPaste.py:232
msgid "Z Toolchange"
msgstr "Z Toolchange"

#: AppGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:127
#: AppTools/ToolSolderPaste.py:234
msgid "The height (Z) for tool (nozzle) change."
msgstr "The height (Z) for tool (nozzle) change."

#: AppGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:136
#: AppTools/ToolSolderPaste.py:242
msgid ""
"The X,Y location for tool (nozzle) change.\n"
"The format is (x, y) where x and y are real numbers."
msgstr ""
"The X,Y location for tool (nozzle) change.\n"
"The format is (x, y) where x and y are real numbers."

#: AppGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:150
#: AppTools/ToolSolderPaste.py:255
msgid "Feedrate (speed) while moving on the X-Y plane."
msgstr "Feedrate (speed) while moving on the X-Y plane."

#: AppGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:163
#: AppTools/ToolSolderPaste.py:267
msgid ""
"Feedrate (speed) while moving vertically\n"
"(on Z plane)."
msgstr ""
"Feedrate (speed) while moving vertically\n"
"(on Z plane)."

#: AppGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:175
#: AppTools/ToolSolderPaste.py:278
msgid "Feedrate Z Dispense"
msgstr "Feedrate Z Dispense"

#: AppGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:177
msgid ""
"Feedrate (speed) while moving up vertically\n"
"to Dispense position (on Z plane)."
msgstr ""
"Feedrate (speed) while moving up vertically\n"
"to Dispense position (on Z plane)."

#: AppGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:188
#: AppTools/ToolSolderPaste.py:290
msgid "Spindle Speed FWD"
msgstr "Spindle Speed FWD"

#: AppGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:190
#: AppTools/ToolSolderPaste.py:292
msgid ""
"The dispenser speed while pushing solder paste\n"
"through the dispenser nozzle."
msgstr ""
"The dispenser speed while pushing solder paste\n"
"through the dispenser nozzle."

#: AppGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:202
#: AppTools/ToolSolderPaste.py:303
msgid "Dwell FWD"
msgstr "Dwell FWD"

#: AppGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:204
#: AppTools/ToolSolderPaste.py:305
msgid "Pause after solder dispensing."
msgstr "Pause after solder dispensing."

#: AppGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:214
#: AppTools/ToolSolderPaste.py:314
msgid "Spindle Speed REV"
msgstr "Spindle Speed REV"

#: AppGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:216
#: AppTools/ToolSolderPaste.py:316
msgid ""
"The dispenser speed while retracting solder paste\n"
"through the dispenser nozzle."
msgstr ""
"The dispenser speed while retracting solder paste\n"
"through the dispenser nozzle."

#: AppGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:228
#: AppTools/ToolSolderPaste.py:327
msgid "Dwell REV"
msgstr "Dwell REV"

#: AppGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:230
#: AppTools/ToolSolderPaste.py:329
msgid ""
"Pause after solder paste dispenser retracted,\n"
"to allow pressure equilibrium."
msgstr ""
"Pause after solder paste dispenser retracted,\n"
"to allow pressure equilibrium."

#: AppGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:239
#: AppTools/ToolSolderPaste.py:337
msgid "Files that control the GCode generation."
msgstr "Files that control the GCode generation."

#: AppGUI/preferences/tools/ToolsSubPrefGroupUI.py:27
msgid "Substractor Tool Options"
msgstr "Substractor Tool Options"

#: AppGUI/preferences/tools/ToolsSubPrefGroupUI.py:33
msgid ""
"A tool to substract one Gerber or Geometry object\n"
"from another of the same type."
msgstr ""
"A tool to substract one Gerber or Geometry object\n"
"from another of the same type."

#: AppGUI/preferences/tools/ToolsSubPrefGroupUI.py:38 AppTools/ToolSub.py:155
msgid "Close paths"
msgstr "Close paths"

#: AppGUI/preferences/tools/ToolsSubPrefGroupUI.py:39
msgid ""
"Checking this will close the paths cut by the Geometry substractor object."
msgstr ""
"Checking this will close the paths cut by the Geometry substractor object."

#: AppGUI/preferences/tools/ToolsTransformPrefGroupUI.py:27
msgid "Transform Tool Options"
msgstr "Transform Tool Options"

#: AppGUI/preferences/tools/ToolsTransformPrefGroupUI.py:33
msgid ""
"Various transformations that can be applied\n"
"on a FlatCAM object."
msgstr ""
"Various transformations that can be applied\n"
"on a FlatCAM object."

#: AppGUI/preferences/tools/ToolsTransformPrefGroupUI.py:64
msgid "Skew"
msgstr "Skew"

#: AppGUI/preferences/tools/ToolsTransformPrefGroupUI.py:105
#: AppTools/ToolTransform.py:150
msgid "Factor for scaling on X axis."
msgstr "Factor for scaling on X axis."

#: AppGUI/preferences/tools/ToolsTransformPrefGroupUI.py:118
#: AppTools/ToolTransform.py:170
msgid "Factor for scaling on Y axis."
msgstr "Factor for scaling on Y axis."

#: AppGUI/preferences/tools/ToolsTransformPrefGroupUI.py:126
#: AppTools/ToolTransform.py:191
msgid ""
"Scale the selected object(s)\n"
"using the Scale_X factor for both axis."
msgstr ""
"Scale the selected object(s)\n"
"using the Scale_X factor for both axis."

#: AppGUI/preferences/tools/ToolsTransformPrefGroupUI.py:134
#: AppTools/ToolTransform.py:198
msgid ""
"Scale the selected object(s)\n"
"using the origin reference when checked,\n"
"and the center of the biggest bounding box\n"
"of the selected objects when unchecked."
msgstr ""
"Scale the selected object(s)\n"
"using the origin reference when checked,\n"
"and the center of the biggest bounding box\n"
"of the selected objects when unchecked."

#: AppGUI/preferences/tools/ToolsTransformPrefGroupUI.py:150
#: AppTools/ToolTransform.py:217
msgid "X val"
msgstr "X val"

#: AppGUI/preferences/tools/ToolsTransformPrefGroupUI.py:152
#: AppTools/ToolTransform.py:219
msgid "Distance to offset on X axis. In current units."
msgstr "Distance to offset on X axis. In current units."

#: AppGUI/preferences/tools/ToolsTransformPrefGroupUI.py:163
#: AppTools/ToolTransform.py:237
msgid "Y val"
msgstr "Y val"

#: AppGUI/preferences/tools/ToolsTransformPrefGroupUI.py:165
#: AppTools/ToolTransform.py:239
msgid "Distance to offset on Y axis. In current units."
msgstr "Distance to offset on Y axis. In current units."

#: AppGUI/preferences/tools/ToolsTransformPrefGroupUI.py:171
#: AppTools/ToolDblSided.py:67 AppTools/ToolDblSided.py:95
#: AppTools/ToolDblSided.py:125
msgid "Mirror"
msgstr "Mirror"

#: AppGUI/preferences/tools/ToolsTransformPrefGroupUI.py:175
#: AppTools/ToolTransform.py:283
msgid "Mirror Reference"
msgstr "Mirror Reference"

#: AppGUI/preferences/tools/ToolsTransformPrefGroupUI.py:177
#: AppTools/ToolTransform.py:285
msgid ""
"Flip the selected object(s)\n"
"around the point in Point Entry Field.\n"
"\n"
"The point coordinates can be captured by\n"
"left click on canvas together with pressing\n"
"SHIFT key. \n"
"Then click Add button to insert coordinates.\n"
"Or enter the coords in format (x, y) in the\n"
"Point Entry field and click Flip on X(Y)"
msgstr ""
"Flip the selected object(s)\n"
"around the point in Point Entry Field.\n"
"\n"
"The point coordinates can be captured by\n"
"left click on canvas together with pressing\n"
"SHIFT key. \n"
"Then click Add button to insert coordinates.\n"
"Or enter the coords in format (x, y) in the\n"
"Point Entry field and click Flip on X(Y)"

#: AppGUI/preferences/tools/ToolsTransformPrefGroupUI.py:188
msgid "Mirror Reference point"
msgstr "Mirror Reference point"

#: AppGUI/preferences/tools/ToolsTransformPrefGroupUI.py:190
msgid ""
"Coordinates in format (x, y) used as reference for mirroring.\n"
"The 'x' in (x, y) will be used when using Flip on X and\n"
"the 'y' in (x, y) will be used when using Flip on Y and"
msgstr ""
"Coordinates in format (x, y) used as reference for mirroring.\n"
"The 'x' in (x, y) will be used when using Flip on X and\n"
"the 'y' in (x, y) will be used when using Flip on Y and"

#: AppGUI/preferences/tools/ToolsTransformPrefGroupUI.py:203
#: AppTools/ToolDistance.py:505 AppTools/ToolDistanceMin.py:286
#: AppTools/ToolTransform.py:332
msgid "Distance"
msgstr "Distance"

#: AppGUI/preferences/tools/ToolsTransformPrefGroupUI.py:205
#: AppTools/ToolTransform.py:334
msgid ""
"A positive value will create the effect of dilation,\n"
"while a negative value will create the effect of erosion.\n"
"Each geometry element of the object will be increased\n"
"or decreased with the 'distance'."
msgstr ""
"A positive value will create the effect of dilation,\n"
"while a negative value will create the effect of erosion.\n"
"Each geometry element of the object will be increased\n"
"or decreased with the 'distance'."

#: AppGUI/preferences/tools/ToolsTransformPrefGroupUI.py:222
#: AppTools/ToolTransform.py:359
msgid ""
"A positive value will create the effect of dilation,\n"
"while a negative value will create the effect of erosion.\n"
"Each geometry element of the object will be increased\n"
"or decreased to fit the 'Value'. Value is a percentage\n"
"of the initial dimension."
msgstr ""
"A positive value will create the effect of dilation,\n"
"while a negative value will create the effect of erosion.\n"
"Each geometry element of the object will be increased\n"
"or decreased to fit the 'Value'. Value is a percentage\n"
"of the initial dimension."

#: AppGUI/preferences/tools/ToolsTransformPrefGroupUI.py:241
#: AppTools/ToolTransform.py:385
msgid ""
"If checked then the buffer will surround the buffered shape,\n"
"every corner will be rounded.\n"
"If not checked then the buffer will follow the exact geometry\n"
"of the buffered shape."
msgstr ""
"If checked then the buffer will surround the buffered shape,\n"
"every corner will be rounded.\n"
"If not checked then the buffer will follow the exact geometry\n"
"of the buffered shape."

#: AppGUI/preferences/utilities/AutoCompletePrefGroupUI.py:27
msgid "Autocompleter Keywords"
msgstr "Autocompleter Keywords"

#: AppGUI/preferences/utilities/AutoCompletePrefGroupUI.py:30
#: AppGUI/preferences/utilities/FAExcPrefGroupUI.py:40
#: AppGUI/preferences/utilities/FAGcoPrefGroupUI.py:30
#: AppGUI/preferences/utilities/FAGrbPrefGroupUI.py:30
msgid "Restore"
msgstr "Restore"

#: AppGUI/preferences/utilities/AutoCompletePrefGroupUI.py:31
msgid "Restore the autocompleter keywords list to the default state."
msgstr "Restore the autocompleter keywords list to the default state."

#: AppGUI/preferences/utilities/AutoCompletePrefGroupUI.py:33
msgid "Delete all autocompleter keywords from the list."
msgstr "Delete all autocompleter keywords from the list."

#: AppGUI/preferences/utilities/AutoCompletePrefGroupUI.py:41
msgid "Keywords list"
msgstr "Keywords list"

#: AppGUI/preferences/utilities/AutoCompletePrefGroupUI.py:43
msgid ""
"List of keywords used by\n"
"the autocompleter in FlatCAM.\n"
"The autocompleter is installed\n"
"in the Code Editor and for the Tcl Shell."
msgstr ""
"List of keywords used by\n"
"the autocompleter in FlatCAM.\n"
"The autocompleter is installed\n"
"in the Code Editor and for the Tcl Shell."

#: AppGUI/preferences/utilities/AutoCompletePrefGroupUI.py:64
#: AppGUI/preferences/utilities/FAExcPrefGroupUI.py:73
#: AppGUI/preferences/utilities/FAGcoPrefGroupUI.py:63
#: AppGUI/preferences/utilities/FAGrbPrefGroupUI.py:62
msgid "Extension"
msgstr "Extension"

#: AppGUI/preferences/utilities/AutoCompletePrefGroupUI.py:65
msgid "A keyword to be added or deleted to the list."
msgstr "A keyword to be added or deleted to the list."

#: AppGUI/preferences/utilities/AutoCompletePrefGroupUI.py:73
msgid "Add keyword"
msgstr "Add keyword"

#: AppGUI/preferences/utilities/AutoCompletePrefGroupUI.py:74
msgid "Add a keyword to the list"
msgstr "Add a keyword to the list"

#: AppGUI/preferences/utilities/AutoCompletePrefGroupUI.py:75
msgid "Delete keyword"
msgstr "Delete keyword"

#: AppGUI/preferences/utilities/AutoCompletePrefGroupUI.py:76
msgid "Delete a keyword from the list"
msgstr "Delete a keyword from the list"

#: AppGUI/preferences/utilities/FAExcPrefGroupUI.py:27
msgid "Excellon File associations"
msgstr "Excellon File associations"

#: AppGUI/preferences/utilities/FAExcPrefGroupUI.py:41
#: AppGUI/preferences/utilities/FAGcoPrefGroupUI.py:31
#: AppGUI/preferences/utilities/FAGrbPrefGroupUI.py:31
msgid "Restore the extension list to the default state."
msgstr "Restore the extension list to the default state."

#: AppGUI/preferences/utilities/FAExcPrefGroupUI.py:43
#: AppGUI/preferences/utilities/FAGcoPrefGroupUI.py:33
#: AppGUI/preferences/utilities/FAGrbPrefGroupUI.py:33
msgid "Delete all extensions from the list."
msgstr "Delete all extensions from the list."

#: AppGUI/preferences/utilities/FAExcPrefGroupUI.py:51
#: AppGUI/preferences/utilities/FAGcoPrefGroupUI.py:41
#: AppGUI/preferences/utilities/FAGrbPrefGroupUI.py:41
msgid "Extensions list"
msgstr "Extensions list"

#: AppGUI/preferences/utilities/FAExcPrefGroupUI.py:53
#: AppGUI/preferences/utilities/FAGcoPrefGroupUI.py:43
#: AppGUI/preferences/utilities/FAGrbPrefGroupUI.py:43
msgid ""
"List of file extensions to be\n"
"associated with FlatCAM."
msgstr ""
"List of file extensions to be\n"
"associated with FlatCAM."

#: AppGUI/preferences/utilities/FAExcPrefGroupUI.py:74
#: AppGUI/preferences/utilities/FAGcoPrefGroupUI.py:64
#: AppGUI/preferences/utilities/FAGrbPrefGroupUI.py:63
msgid "A file extension to be added or deleted to the list."
msgstr "A file extension to be added or deleted to the list."

#: AppGUI/preferences/utilities/FAExcPrefGroupUI.py:82
#: AppGUI/preferences/utilities/FAGcoPrefGroupUI.py:72
#: AppGUI/preferences/utilities/FAGrbPrefGroupUI.py:71
msgid "Add Extension"
msgstr "Add Extension"

#: AppGUI/preferences/utilities/FAExcPrefGroupUI.py:83
#: AppGUI/preferences/utilities/FAGcoPrefGroupUI.py:73
#: AppGUI/preferences/utilities/FAGrbPrefGroupUI.py:72
msgid "Add a file extension to the list"
msgstr "Add a file extension to the list"

#: AppGUI/preferences/utilities/FAExcPrefGroupUI.py:84
#: AppGUI/preferences/utilities/FAGcoPrefGroupUI.py:74
#: AppGUI/preferences/utilities/FAGrbPrefGroupUI.py:73
msgid "Delete Extension"
msgstr "Delete Extension"

#: AppGUI/preferences/utilities/FAExcPrefGroupUI.py:85
#: AppGUI/preferences/utilities/FAGcoPrefGroupUI.py:75
#: AppGUI/preferences/utilities/FAGrbPrefGroupUI.py:74
msgid "Delete a file extension from the list"
msgstr "Delete a file extension from the list"

#: AppGUI/preferences/utilities/FAExcPrefGroupUI.py:92
#: AppGUI/preferences/utilities/FAGcoPrefGroupUI.py:82
#: AppGUI/preferences/utilities/FAGrbPrefGroupUI.py:81
msgid "Apply Association"
msgstr "Apply Association"

#: AppGUI/preferences/utilities/FAExcPrefGroupUI.py:93
#: AppGUI/preferences/utilities/FAGcoPrefGroupUI.py:83
#: AppGUI/preferences/utilities/FAGrbPrefGroupUI.py:82
msgid ""
"Apply the file associations between\n"
"FlatCAM and the files with above extensions.\n"
"They will be active after next logon.\n"
"This work only in Windows."
msgstr ""
"Apply the file associations between\n"
"FlatCAM and the files with above extensions.\n"
"They will be active after next logon.\n"
"This work only in Windows."

#: AppGUI/preferences/utilities/FAGcoPrefGroupUI.py:27
msgid "GCode File associations"
msgstr "GCode File associations"

#: AppGUI/preferences/utilities/FAGrbPrefGroupUI.py:27
msgid "Gerber File associations"
msgstr "Gerber File associations"

#: AppObjects/AppObject.py:133
#, python-brace-format
msgid ""
"Object ({kind}) failed because: {error} \n"
"\n"
msgstr ""
"Object ({kind}) failed because: {error} \n"
"\n"

#: AppObjects/AppObject.py:148
msgid "Converting units to "
msgstr "Converting units to "

#: AppObjects/AppObject.py:253
msgid "CREATE A NEW FLATCAM TCL SCRIPT"
msgstr "CREATE A NEW FLATCAM TCL SCRIPT"

#: AppObjects/AppObject.py:254
msgid "TCL Tutorial is here"
msgstr "TCL Tutorial is here"

#: AppObjects/AppObject.py:256
msgid "FlatCAM commands list"
msgstr "FlatCAM commands list"

#: AppObjects/AppObject.py:257
msgid ""
"Type >help< followed by Run Code for a list of FlatCAM Tcl Commands "
"(displayed in Tcl Shell)."
msgstr ""
"Type >help< followed by Run Code for a list of FlatCAM Tcl Commands "
"(displayed in Tcl Shell)."

#: AppObjects/AppObject.py:303 AppObjects/AppObject.py:309
#: AppObjects/AppObject.py:315 AppObjects/AppObject.py:321
#: AppObjects/AppObject.py:327 AppObjects/AppObject.py:333
msgid "created/selected"
msgstr "created/selected"

#: AppObjects/AppObject.py:348 AppObjects/FlatCAMObj.py:246
#: AppObjects/FlatCAMObj.py:277 AppObjects/FlatCAMObj.py:293
#: AppObjects/FlatCAMObj.py:373 AppTools/ToolCopperThieving.py:1487
#: AppTools/ToolCorners.py:394 AppTools/ToolFiducials.py:810
#: AppTools/ToolMove.py:229 AppTools/ToolQRCode.py:728 App_Main.py:4619
msgid "Plotting"
msgstr "Plotting"

#: AppObjects/FlatCAMCNCJob.py:429 AppObjects/FlatCAMDocument.py:71
#: AppObjects/FlatCAMScript.py:82
msgid "<span style=\"color:green;\"><b>Basic</b></span>"
msgstr "<span style=\"color:green;\"><b>Basic</b></span>"

#: AppObjects/FlatCAMCNCJob.py:435 AppObjects/FlatCAMDocument.py:75
#: AppObjects/FlatCAMScript.py:86
msgid "<span style=\"color:red;\"><b>Advanced</b></span>"
msgstr "<span style=\"color:red;\"><b>Advanced</b></span>"

#: AppObjects/FlatCAMCNCJob.py:478
msgid "Plotting..."
msgstr "Plotting..."

#: AppObjects/FlatCAMCNCJob.py:507 AppObjects/FlatCAMCNCJob.py:512
#: AppTools/ToolSolderPaste.py:1499
msgid "Export Machine Code ..."
msgstr "Export Machine Code ..."

#: AppObjects/FlatCAMCNCJob.py:517 AppTools/ToolSolderPaste.py:1503
msgid "Export Machine Code cancelled ..."
msgstr "Export Machine Code cancelled ..."

#: AppObjects/FlatCAMCNCJob.py:538
msgid "Machine Code file saved to"
msgstr "Machine Code file saved to"

#: AppObjects/FlatCAMCNCJob.py:548 AppObjects/FlatCAMScript.py:134
#: App_Main.py:7455
msgid "Loading..."
msgstr "Loading..."

#: AppObjects/FlatCAMCNCJob.py:562 App_Main.py:7552
msgid "Code Editor"
msgstr "Code Editor"

#: AppObjects/FlatCAMCNCJob.py:599 AppTools/ToolCalibration.py:1097
msgid "Loaded Machine Code into Code Editor"
msgstr "Loaded Machine Code into Code Editor"

#: AppObjects/FlatCAMCNCJob.py:740
msgid "This CNCJob object can't be processed because it is a"
msgstr "This CNCJob object can't be processed because it is a"

#: AppObjects/FlatCAMCNCJob.py:742
msgid "CNCJob object"
msgstr "CNCJob object"

#: AppObjects/FlatCAMCNCJob.py:922
msgid ""
"G-code does not have a G94 code and we will not include the code in the "
"'Prepend to GCode' text box"
msgstr ""
"G-code does not have a G94 code and we will not include the code in the "
"'Prepend to GCode' text box"

#: AppObjects/FlatCAMCNCJob.py:933
msgid "Cancelled. The Toolchange Custom code is enabled but it's empty."
msgstr "Cancelled. The Toolchange Custom code is enabled but it's empty."

#: AppObjects/FlatCAMCNCJob.py:938
msgid "Toolchange G-code was replaced by a custom code."
msgstr "Toolchange G-code was replaced by a custom code."

#: AppObjects/FlatCAMCNCJob.py:986 AppObjects/FlatCAMCNCJob.py:996
msgid ""
"The used preprocessor file has to have in it's name: 'toolchange_custom'"
msgstr ""
"The used preprocessor file has to have in it's name: 'toolchange_custom'"

#: AppObjects/FlatCAMCNCJob.py:999
msgid "There is no preprocessor file."
msgstr "There is no preprocessor file."

#: AppObjects/FlatCAMDocument.py:175
msgid "Document Editor"
msgstr "Document Editor"

#: AppObjects/FlatCAMExcellon.py:527 AppObjects/FlatCAMExcellon.py:825
#: AppObjects/FlatCAMGeometry.py:322 AppObjects/FlatCAMGeometry.py:852
#: AppTools/ToolNCC.py:811 AppTools/ToolNCC.py:1196 AppTools/ToolPaint.py:778
#: AppTools/ToolPaint.py:1170
msgid "Multiple Tools"
msgstr "Multiple Tools"

#: AppObjects/FlatCAMExcellon.py:805
msgid "No Tool Selected"
msgstr "No Tool Selected"

#: AppObjects/FlatCAMExcellon.py:1155 AppObjects/FlatCAMExcellon.py:1248
#: AppObjects/FlatCAMExcellon.py:1435
msgid "Please select one or more tools from the list and try again."
msgstr "Please select one or more tools from the list and try again."

#: AppObjects/FlatCAMExcellon.py:1162
msgid "Milling tool for DRILLS is larger than hole size. Cancelled."
msgstr "Milling tool for DRILLS is larger than hole size. Cancelled."

#: AppObjects/FlatCAMExcellon.py:1177 AppObjects/FlatCAMExcellon.py:1268
#: AppObjects/FlatCAMExcellon.py:1453 tclCommands/TclCommandDrillcncjob.py:195
msgid "Tool_nr"
msgstr "Tool_nr"

#: AppObjects/FlatCAMExcellon.py:1177 AppObjects/FlatCAMExcellon.py:1268
#: AppObjects/FlatCAMExcellon.py:1453 tclCommands/TclCommandDrillcncjob.py:195
msgid "Drills_Nr"
msgstr "Drills_Nr"

#: AppObjects/FlatCAMExcellon.py:1177 AppObjects/FlatCAMExcellon.py:1268
#: AppObjects/FlatCAMExcellon.py:1453 tclCommands/TclCommandDrillcncjob.py:195
msgid "Slots_Nr"
msgstr "Slots_Nr"

#: AppObjects/FlatCAMExcellon.py:1257
msgid "Milling tool for SLOTS is larger than hole size. Cancelled."
msgstr "Milling tool for SLOTS is larger than hole size. Cancelled."

#: AppObjects/FlatCAMExcellon.py:1361 AppObjects/FlatCAMGeometry.py:1625
msgid "Focus Z"
msgstr "Focus Z"

#: AppObjects/FlatCAMExcellon.py:1380 AppObjects/FlatCAMGeometry.py:1644
msgid "Laser Power"
msgstr "Laser Power"

#: AppObjects/FlatCAMExcellon.py:1510 AppObjects/FlatCAMGeometry.py:2077
#: AppObjects/FlatCAMGeometry.py:2081 AppObjects/FlatCAMGeometry.py:2232
msgid "Generating CNC Code"
msgstr "Generating CNC Code"

#: AppObjects/FlatCAMExcellon.py:1563 AppObjects/FlatCAMGeometry.py:2542
#| msgid "Delete failed. Select a tool to delete."
msgid "Delete failed. There are no exclusion areas to delete."
msgstr "Delete failed. There are no exclusion areas to delete."

#: AppObjects/FlatCAMExcellon.py:1580 AppObjects/FlatCAMGeometry.py:2559
#| msgid "Failed. Nothing selected."
msgid "Delete failed. Nothing is selected."
msgstr "Delete failed. Nothing is selected."

#: AppObjects/FlatCAMExcellon.py:1804 AppTools/ToolNCC.py:918
#: AppTools/ToolPaint.py:843
msgid "Current Tool parameters were applied to all tools."
msgstr "Current Tool parameters were applied to all tools."

#: AppObjects/FlatCAMGeometry.py:123 AppObjects/FlatCAMGeometry.py:1289
#: AppObjects/FlatCAMGeometry.py:1290 AppObjects/FlatCAMGeometry.py:1299
msgid "Iso"
msgstr "Iso"

#: AppObjects/FlatCAMGeometry.py:123 AppObjects/FlatCAMGeometry.py:515
#: AppObjects/FlatCAMGeometry.py:911 AppObjects/FlatCAMGerber.py:891
#: AppObjects/FlatCAMGerber.py:1039 AppTools/ToolCutOut.py:690
#: AppTools/ToolCutOut.py:886 AppTools/ToolCutOut.py:1046
msgid "Rough"
msgstr "Rough"

#: AppObjects/FlatCAMGeometry.py:123
msgid "Finish"
msgstr "Finish"

#: AppObjects/FlatCAMGeometry.py:550
msgid "Add from Tool DB"
msgstr "Add from Tool DB"

#: AppObjects/FlatCAMGeometry.py:930
msgid "Tool added in Tool Table."
msgstr "Tool added in Tool Table."

#: AppObjects/FlatCAMGeometry.py:1039 AppObjects/FlatCAMGeometry.py:1048
msgid "Failed. Select a tool to copy."
msgstr "Failed. Select a tool to copy."

#: AppObjects/FlatCAMGeometry.py:1077
msgid "Tool was copied in Tool Table."
msgstr "Tool was copied in Tool Table."

#: AppObjects/FlatCAMGeometry.py:1104
msgid "Tool was edited in Tool Table."
msgstr "Tool was edited in Tool Table."

#: AppObjects/FlatCAMGeometry.py:1133 AppObjects/FlatCAMGeometry.py:1142
msgid "Failed. Select a tool to delete."
msgstr "Failed. Select a tool to delete."

#: AppObjects/FlatCAMGeometry.py:1166
msgid "Tool was deleted in Tool Table."
msgstr "Tool was deleted in Tool Table."

#: AppObjects/FlatCAMGeometry.py:1203 AppObjects/FlatCAMGeometry.py:1212
msgid ""
"Disabled because the tool is V-shape.\n"
"For V-shape tools the depth of cut is\n"
"calculated from other parameters like:\n"
"- 'V-tip Angle' -> angle at the tip of the tool\n"
"- 'V-tip Dia' -> diameter at the tip of the tool \n"
"- Tool Dia -> 'Dia' column found in the Tool Table\n"
"NB: a value of zero means that Tool Dia = 'V-tip Dia'"
msgstr ""
"Disabled because the tool is V-shape.\n"
"For V-shape tools the depth of cut is\n"
"calculated from other parameters like:\n"
"- 'V-tip Angle' -> angle at the tip of the tool\n"
"- 'V-tip Dia' -> diameter at the tip of the tool \n"
"- Tool Dia -> 'Dia' column found in the Tool Table\n"
"NB: a value of zero means that Tool Dia = 'V-tip Dia'"

#: AppObjects/FlatCAMGeometry.py:1697
msgid "This Geometry can't be processed because it is"
msgstr "This Geometry can't be processed because it is"

#: AppObjects/FlatCAMGeometry.py:1697
msgid "geometry"
msgstr "geometry"

#: AppObjects/FlatCAMGeometry.py:1738
msgid "Failed. No tool selected in the tool table ..."
msgstr "Failed. No tool selected in the tool table ..."

#: AppObjects/FlatCAMGeometry.py:1836 AppObjects/FlatCAMGeometry.py:1986
msgid ""
"Tool Offset is selected in Tool Table but no value is provided.\n"
"Add a Tool Offset or change the Offset Type."
msgstr ""
"Tool Offset is selected in Tool Table but no value is provided.\n"
"Add a Tool Offset or change the Offset Type."

#: AppObjects/FlatCAMGeometry.py:1902 AppObjects/FlatCAMGeometry.py:2048
msgid "G-Code parsing in progress..."
msgstr "G-Code parsing in progress..."

#: AppObjects/FlatCAMGeometry.py:1904 AppObjects/FlatCAMGeometry.py:2050
msgid "G-Code parsing finished..."
msgstr "G-Code parsing finished..."

#: AppObjects/FlatCAMGeometry.py:1912
msgid "Finished G-Code processing"
msgstr "Finished G-Code processing"

#: AppObjects/FlatCAMGeometry.py:1914 AppObjects/FlatCAMGeometry.py:2062
msgid "G-Code processing failed with error"
msgstr "G-Code processing failed with error"

#: AppObjects/FlatCAMGeometry.py:1956 AppTools/ToolSolderPaste.py:1301
msgid "Cancelled. Empty file, it has no geometry"
msgstr "Cancelled. Empty file, it has no geometry"

#: AppObjects/FlatCAMGeometry.py:2060 AppObjects/FlatCAMGeometry.py:2227
msgid "Finished G-Code processing..."
msgstr "Finished G-Code processing..."

#: AppObjects/FlatCAMGeometry.py:2079 AppObjects/FlatCAMGeometry.py:2083
#: AppObjects/FlatCAMGeometry.py:2234
msgid "CNCjob created"
msgstr "CNCjob created"

#: AppObjects/FlatCAMGeometry.py:2265 AppObjects/FlatCAMGeometry.py:2274
#: AppParsers/ParseGerber.py:1866 AppParsers/ParseGerber.py:1876
msgid "Scale factor has to be a number: integer or float."
msgstr "Scale factor has to be a number: integer or float."

#: AppObjects/FlatCAMGeometry.py:2337
msgid "Geometry Scale done."
msgstr "Geometry Scale done."

#: AppObjects/FlatCAMGeometry.py:2354 AppParsers/ParseGerber.py:1992
msgid ""
"An (x,y) pair of values are needed. Probable you entered only one value in "
"the Offset field."
msgstr ""
"An (x,y) pair of values are needed. Probable you entered only one value in "
"the Offset field."

#: AppObjects/FlatCAMGeometry.py:2410
msgid "Geometry Offset done."
msgstr "Geometry Offset done."

#: AppObjects/FlatCAMGeometry.py:2439
msgid ""
"The Toolchange X,Y field in Edit -> Preferences has to be in the format (x, "
"y)\n"
"but now there is only one value, not two."
msgstr ""
"The Toolchange X,Y field in Edit -> Preferences has to be in the format (x, "
"y)\n"
"but now there is only one value, not two."

#: AppObjects/FlatCAMGerber.py:494
msgid "Buffering solid geometry"
msgstr "Buffering solid geometry"

#: AppObjects/FlatCAMGerber.py:503
msgid "Done"
msgstr "Done"

#: AppObjects/FlatCAMGerber.py:529 AppObjects/FlatCAMGerber.py:555
msgid "Operation could not be done."
msgstr "Operation could not be done."

#: AppObjects/FlatCAMGerber.py:572
msgid "Isolating..."
msgstr "Isolating..."

#: AppObjects/FlatCAMGerber.py:631
msgid "Click on a polygon to isolate it."
msgstr "Click on a polygon to isolate it."

#: AppObjects/FlatCAMGerber.py:670 AppObjects/FlatCAMGerber.py:774
#: AppTools/ToolPaint.py:1515
msgid "Added polygon"
msgstr "Added polygon"

#: AppObjects/FlatCAMGerber.py:671 AppObjects/FlatCAMGerber.py:776
msgid "Click to add next polygon or right click to start isolation."
msgstr "Click to add next polygon or right click to start isolation."

#: AppObjects/FlatCAMGerber.py:683 AppTools/ToolPaint.py:1529
msgid "Removed polygon"
msgstr "Removed polygon"

#: AppObjects/FlatCAMGerber.py:684
msgid "Click to add/remove next polygon or right click to start isolation."
msgstr "Click to add/remove next polygon or right click to start isolation."

#: AppObjects/FlatCAMGerber.py:689 AppTools/ToolPaint.py:1535
msgid "No polygon detected under click position."
msgstr "No polygon detected under click position."

#: AppObjects/FlatCAMGerber.py:710 AppTools/ToolPaint.py:1564
msgid "List of single polygons is empty. Aborting."
msgstr "List of single polygons is empty. Aborting."

#: AppObjects/FlatCAMGerber.py:779
msgid "No polygon in selection."
msgstr "No polygon in selection."

#: AppObjects/FlatCAMGerber.py:907 AppObjects/FlatCAMGerber.py:986
#: AppTools/ToolNCC.py:2097 AppTools/ToolNCC.py:3183 AppTools/ToolNCC.py:3562
msgid "Isolation geometry could not be generated."
msgstr "Isolation geometry could not be generated."

#: AppObjects/FlatCAMGerber.py:932 AppObjects/FlatCAMGerber.py:1064
msgid "Isolation geometry created"
msgstr "Isolation geometry created"

#: AppObjects/FlatCAMGerber.py:941 AppObjects/FlatCAMGerber.py:1071
msgid "Subtracting Geo"
msgstr "Subtracting Geo"

#: AppObjects/FlatCAMGerber.py:1396
msgid "Plotting Apertures"
msgstr "Plotting Apertures"

#: AppObjects/FlatCAMObj.py:232
msgid "Name changed from"
msgstr "Name changed from"

#: AppObjects/FlatCAMObj.py:232
msgid "to"
msgstr "to"

#: AppObjects/FlatCAMObj.py:243
msgid "Offsetting..."
msgstr "Offsetting..."

#: AppObjects/FlatCAMObj.py:257 AppObjects/FlatCAMObj.py:262
msgid "Scaling could not be executed."
msgstr "Scaling could not be executed."

#: AppObjects/FlatCAMObj.py:266 AppObjects/FlatCAMObj.py:274
msgid "Scale done."
msgstr "Scale done."

#: AppObjects/FlatCAMObj.py:272
msgid "Scaling..."
msgstr "Scaling..."

#: AppObjects/FlatCAMObj.py:290
msgid "Skewing..."
msgstr "Skewing..."

#: AppObjects/FlatCAMScript.py:163
msgid "Script Editor"
msgstr "Script Editor"

#: AppObjects/ObjectCollection.py:513
#, python-brace-format
msgid "Object renamed from <b>{old}</b> to <b>{new}</b>"
msgstr "Object renamed from <b>{old}</b> to <b>{new}</b>"

#: AppObjects/ObjectCollection.py:925 AppObjects/ObjectCollection.py:931
#: AppObjects/ObjectCollection.py:937 AppObjects/ObjectCollection.py:943
#: AppObjects/ObjectCollection.py:949 AppObjects/ObjectCollection.py:955
#: App_Main.py:6408 App_Main.py:6414 App_Main.py:6420 App_Main.py:6426
msgid "selected"
msgstr "selected"

#: AppObjects/ObjectCollection.py:986
msgid "Cause of error"
msgstr "Cause of error"

#: AppObjects/ObjectCollection.py:1187
msgid "All objects are selected."
msgstr "All objects are selected."

#: AppObjects/ObjectCollection.py:1197
msgid "Objects selection is cleared."
msgstr "Objects selection is cleared."

#: AppParsers/ParseExcellon.py:315
msgid "This is GCODE mark"
msgstr "This is GCODE mark"

#: AppParsers/ParseExcellon.py:432
msgid ""
"No tool diameter info's. See shell.\n"
"A tool change event: T"
msgstr ""
"No tool diameter info's. See shell.\n"
"A tool change event: T"

#: AppParsers/ParseExcellon.py:435
msgid ""
"was found but the Excellon file have no informations regarding the tool "
"diameters therefore the application will try to load it by using some 'fake' "
"diameters.\n"
"The user needs to edit the resulting Excellon object and change the "
"diameters to reflect the real diameters."
msgstr ""
"was found but the Excellon file have no informations regarding the tool "
"diameters therefore the application will try to load it by using some 'fake' "
"diameters.\n"
"The user needs to edit the resulting Excellon object and change the "
"diameters to reflect the real diameters."

#: AppParsers/ParseExcellon.py:899
msgid ""
"Excellon Parser error.\n"
"Parsing Failed. Line"
msgstr ""
"Excellon Parser error.\n"
"Parsing Failed. Line"

#: AppParsers/ParseExcellon.py:981
msgid ""
"Excellon.create_geometry() -> a drill location was skipped due of not having "
"a tool associated.\n"
"Check the resulting GCode."
msgstr ""
"Excellon.create_geometry() -> a drill location was skipped due of not having "
"a tool associated.\n"
"Check the resulting GCode."

#: AppParsers/ParseFont.py:303
msgid "Font not supported, try another one."
msgstr "Font not supported, try another one."

#: AppParsers/ParseGerber.py:425
msgid "Gerber processing. Parsing"
msgstr "Gerber processing. Parsing"

#: AppParsers/ParseGerber.py:425 AppParsers/ParseHPGL2.py:181
msgid "lines"
msgstr "lines"

#: AppParsers/ParseGerber.py:1001 AppParsers/ParseGerber.py:1101
#: AppParsers/ParseHPGL2.py:274 AppParsers/ParseHPGL2.py:288
#: AppParsers/ParseHPGL2.py:307 AppParsers/ParseHPGL2.py:331
#: AppParsers/ParseHPGL2.py:366
msgid "Coordinates missing, line ignored"
msgstr "Coordinates missing, line ignored"

#: AppParsers/ParseGerber.py:1003 AppParsers/ParseGerber.py:1103
msgid "GERBER file might be CORRUPT. Check the file !!!"
msgstr "GERBER file might be CORRUPT. Check the file !!!"

#: AppParsers/ParseGerber.py:1057
msgid ""
"Region does not have enough points. File will be processed but there are "
"parser errors. Line number"
msgstr ""
"Region does not have enough points. File will be processed but there are "
"parser errors. Line number"

#: AppParsers/ParseGerber.py:1487 AppParsers/ParseHPGL2.py:401
msgid "Gerber processing. Joining polygons"
msgstr "Gerber processing. Joining polygons"

#: AppParsers/ParseGerber.py:1504
msgid "Gerber processing. Applying Gerber polarity."
msgstr "Gerber processing. Applying Gerber polarity."

#: AppParsers/ParseGerber.py:1564
msgid "Gerber Line"
msgstr "Gerber Line"

#: AppParsers/ParseGerber.py:1564
msgid "Gerber Line Content"
msgstr "Gerber Line Content"

#: AppParsers/ParseGerber.py:1566
msgid "Gerber Parser ERROR"
msgstr "Gerber Parser ERROR"

#: AppParsers/ParseGerber.py:1956
msgid "Gerber Scale done."
msgstr "Gerber Scale done."

#: AppParsers/ParseGerber.py:2048
msgid "Gerber Offset done."
msgstr "Gerber Offset done."

#: AppParsers/ParseGerber.py:2124
msgid "Gerber Mirror done."
msgstr "Gerber Mirror done."

#: AppParsers/ParseGerber.py:2198
msgid "Gerber Skew done."
msgstr "Gerber Skew done."

#: AppParsers/ParseGerber.py:2260
msgid "Gerber Rotate done."
msgstr "Gerber Rotate done."

#: AppParsers/ParseGerber.py:2417
msgid "Gerber Buffer done."
msgstr "Gerber Buffer done."

#: AppParsers/ParseHPGL2.py:181
msgid "HPGL2 processing. Parsing"
msgstr "HPGL2 processing. Parsing"

#: AppParsers/ParseHPGL2.py:413
msgid "HPGL2 Line"
msgstr "HPGL2 Line"

#: AppParsers/ParseHPGL2.py:413
msgid "HPGL2 Line Content"
msgstr "HPGL2 Line Content"

#: AppParsers/ParseHPGL2.py:414
msgid "HPGL2 Parser ERROR"
msgstr "HPGL2 Parser ERROR"

#: AppProcess.py:172
msgid "processes running."
msgstr "processes running."

#: AppTools/ToolAlignObjects.py:32
msgid "Align Objects"
msgstr "Align Objects"

#: AppTools/ToolAlignObjects.py:61
msgid "MOVING object"
msgstr "MOVING object"

#: AppTools/ToolAlignObjects.py:65
msgid ""
"Specify the type of object to be aligned.\n"
"It can be of type: Gerber or Excellon.\n"
"The selection here decide the type of objects that will be\n"
"in the Object combobox."
msgstr ""
"Specify the type of object to be aligned.\n"
"It can be of type: Gerber or Excellon.\n"
"The selection here decide the type of objects that will be\n"
"in the Object combobox."

#: AppTools/ToolAlignObjects.py:86
msgid "Object to be aligned."
msgstr "Object to be aligned."

#: AppTools/ToolAlignObjects.py:98
msgid "TARGET object"
msgstr "TARGET object"

#: AppTools/ToolAlignObjects.py:100
msgid ""
"Specify the type of object to be aligned to.\n"
"It can be of type: Gerber or Excellon.\n"
"The selection here decide the type of objects that will be\n"
"in the Object combobox."
msgstr ""
"Specify the type of object to be aligned to.\n"
"It can be of type: Gerber or Excellon.\n"
"The selection here decide the type of objects that will be\n"
"in the Object combobox."

#: AppTools/ToolAlignObjects.py:122
msgid "Object to be aligned to. Aligner."
msgstr "Object to be aligned to. Aligner."

#: AppTools/ToolAlignObjects.py:135
msgid "Alignment Type"
msgstr "Alignment Type"

#: AppTools/ToolAlignObjects.py:137
msgid ""
"The type of alignment can be:\n"
"- Single Point -> it require a single point of sync, the action will be a "
"translation\n"
"- Dual Point -> it require two points of sync, the action will be "
"translation followed by rotation"
msgstr ""
"The type of alignment can be:\n"
"- Single Point -> it require a single point of sync, the action will be a "
"translation\n"
"- Dual Point -> it require two points of sync, the action will be "
"translation followed by rotation"

#: AppTools/ToolAlignObjects.py:143
msgid "Single Point"
msgstr "Single Point"

#: AppTools/ToolAlignObjects.py:144
msgid "Dual Point"
msgstr "Dual Point"

#: AppTools/ToolAlignObjects.py:159
msgid "Align Object"
msgstr "Align Object"

#: AppTools/ToolAlignObjects.py:161
msgid ""
"Align the specified object to the aligner object.\n"
"If only one point is used then it assumes translation.\n"
"If tho points are used it assume translation and rotation."
msgstr ""
"Align the specified object to the aligner object.\n"
"If only one point is used then it assumes translation.\n"
"If tho points are used it assume translation and rotation."

#: AppTools/ToolAlignObjects.py:176 AppTools/ToolCalculators.py:246
#: AppTools/ToolCalibration.py:683 AppTools/ToolCopperThieving.py:484
#: AppTools/ToolCorners.py:173 AppTools/ToolCutOut.py:362
#: AppTools/ToolDblSided.py:471 AppTools/ToolExtractDrills.py:310
#: AppTools/ToolFiducials.py:318 AppTools/ToolFilm.py:503
#: AppTools/ToolInvertGerber.py:140 AppTools/ToolNCC.py:612
#: AppTools/ToolOptimal.py:237 AppTools/ToolPaint.py:555
#: AppTools/ToolPanelize.py:280 AppTools/ToolPunchGerber.py:339
#: AppTools/ToolQRCode.py:314 AppTools/ToolRulesCheck.py:516
#: AppTools/ToolSolderPaste.py:473 AppTools/ToolSub.py:176
#: AppTools/ToolTransform.py:398
msgid "Reset Tool"
msgstr "Reset Tool"

#: AppTools/ToolAlignObjects.py:178 AppTools/ToolCalculators.py:248
#: AppTools/ToolCalibration.py:685 AppTools/ToolCopperThieving.py:486
#: AppTools/ToolCorners.py:175 AppTools/ToolCutOut.py:364
#: AppTools/ToolDblSided.py:473 AppTools/ToolExtractDrills.py:312
#: AppTools/ToolFiducials.py:320 AppTools/ToolFilm.py:505
#: AppTools/ToolInvertGerber.py:142 AppTools/ToolNCC.py:614
#: AppTools/ToolOptimal.py:239 AppTools/ToolPaint.py:557
#: AppTools/ToolPanelize.py:282 AppTools/ToolPunchGerber.py:341
#: AppTools/ToolQRCode.py:316 AppTools/ToolRulesCheck.py:518
#: AppTools/ToolSolderPaste.py:475 AppTools/ToolSub.py:178
#: AppTools/ToolTransform.py:400
msgid "Will reset the tool parameters."
msgstr "Will reset the tool parameters."

#: AppTools/ToolAlignObjects.py:244
msgid "Align Tool"
msgstr "Align Tool"

#: AppTools/ToolAlignObjects.py:289
msgid "There is no aligned FlatCAM object selected..."
msgstr "There is no aligned FlatCAM object selected..."

#: AppTools/ToolAlignObjects.py:299
msgid "There is no aligner FlatCAM object selected..."
msgstr "There is no aligner FlatCAM object selected..."

#: AppTools/ToolAlignObjects.py:325 AppTools/ToolAlignObjects.py:385
msgid "First Point"
msgstr "First Point"

#: AppTools/ToolAlignObjects.py:325 AppTools/ToolAlignObjects.py:400
msgid "Click on the START point."
msgstr "Click on the START point."

#: AppTools/ToolAlignObjects.py:380 AppTools/ToolCalibration.py:920
msgid "Cancelled by user request."
msgstr "Cancelled by user request."

#: AppTools/ToolAlignObjects.py:385 AppTools/ToolAlignObjects.py:407
msgid "Click on the DESTINATION point."
msgstr "Click on the DESTINATION point."

#: AppTools/ToolAlignObjects.py:385 AppTools/ToolAlignObjects.py:400
#: AppTools/ToolAlignObjects.py:407
msgid "Or right click to cancel."
msgstr "Or right click to cancel."

#: AppTools/ToolAlignObjects.py:400 AppTools/ToolAlignObjects.py:407
#: AppTools/ToolFiducials.py:111
msgid "Second Point"
msgstr "Second Point"

#: AppTools/ToolCalculators.py:24
msgid "Calculators"
msgstr "Calculators"

#: AppTools/ToolCalculators.py:26
msgid "Units Calculator"
msgstr "Units Calculator"

#: AppTools/ToolCalculators.py:70
msgid "Here you enter the value to be converted from INCH to MM"
msgstr "Here you enter the value to be converted from INCH to MM"

#: AppTools/ToolCalculators.py:75
msgid "Here you enter the value to be converted from MM to INCH"
msgstr "Here you enter the value to be converted from MM to INCH"

#: AppTools/ToolCalculators.py:111
msgid ""
"This is the angle of the tip of the tool.\n"
"It is specified by manufacturer."
msgstr ""
"This is the angle of the tip of the tool.\n"
"It is specified by manufacturer."

#: AppTools/ToolCalculators.py:120
msgid ""
"This is the depth to cut into the material.\n"
"In the CNCJob is the CutZ parameter."
msgstr ""
"This is the depth to cut into the material.\n"
"In the CNCJob is the CutZ parameter."

#: AppTools/ToolCalculators.py:128
msgid ""
"This is the tool diameter to be entered into\n"
"FlatCAM Gerber section.\n"
"In the CNCJob section it is called >Tool dia<."
msgstr ""
"This is the tool diameter to be entered into\n"
"FlatCAM Gerber section.\n"
"In the CNCJob section it is called >Tool dia<."

#: AppTools/ToolCalculators.py:139 AppTools/ToolCalculators.py:235
msgid "Calculate"
msgstr "Calculate"

#: AppTools/ToolCalculators.py:142
msgid ""
"Calculate either the Cut Z or the effective tool diameter,\n"
"  depending on which is desired and which is known. "
msgstr ""
"Calculate either the Cut Z or the effective tool diameter,\n"
"  depending on which is desired and which is known. "

#: AppTools/ToolCalculators.py:205
msgid "Current Value"
msgstr "Current Value"

#: AppTools/ToolCalculators.py:212
msgid ""
"This is the current intensity value\n"
"to be set on the Power Supply. In Amps."
msgstr ""
"This is the current intensity value\n"
"to be set on the Power Supply. In Amps."

#: AppTools/ToolCalculators.py:216
msgid "Time"
msgstr "Time"

#: AppTools/ToolCalculators.py:223
msgid ""
"This is the calculated time required for the procedure.\n"
"In minutes."
msgstr ""
"This is the calculated time required for the procedure.\n"
"In minutes."

#: AppTools/ToolCalculators.py:238
msgid ""
"Calculate the current intensity value and the procedure time,\n"
"depending on the parameters above"
msgstr ""
"Calculate the current intensity value and the procedure time,\n"
"depending on the parameters above"

#: AppTools/ToolCalculators.py:299
msgid "Calc. Tool"
msgstr "Calc. Tool"

#: AppTools/ToolCalibration.py:67
msgid "GCode Parameters"
msgstr "GCode Parameters"

#: AppTools/ToolCalibration.py:69
msgid "Parameters used when creating the GCode in this tool."
msgstr "Parameters used when creating the GCode in this tool."

#: AppTools/ToolCalibration.py:173
msgid "STEP 1: Acquire Calibration Points"
msgstr "STEP 1: Acquire Calibration Points"

#: AppTools/ToolCalibration.py:175
msgid ""
"Pick four points by clicking on canvas.\n"
"Those four points should be in the four\n"
"(as much as possible) corners of the object."
msgstr ""
"Pick four points by clicking on canvas.\n"
"Those four points should be in the four\n"
"(as much as possible) corners of the object."

#: AppTools/ToolCalibration.py:193 AppTools/ToolFilm.py:71
#: AppTools/ToolImage.py:54 AppTools/ToolPanelize.py:77
#: AppTools/ToolProperties.py:177
msgid "Object Type"
msgstr "Object Type"

#: AppTools/ToolCalibration.py:210
msgid "Source object selection"
msgstr "Source object selection"

#: AppTools/ToolCalibration.py:212
msgid "FlatCAM Object to be used as a source for reference points."
msgstr "FlatCAM Object to be used as a source for reference points."

#: AppTools/ToolCalibration.py:218
msgid "Calibration Points"
msgstr "Calibration Points"

#: AppTools/ToolCalibration.py:220
msgid ""
"Contain the expected calibration points and the\n"
"ones measured."
msgstr ""
"Contain the expected calibration points and the\n"
"ones measured."

#: AppTools/ToolCalibration.py:235 AppTools/ToolSub.py:76
#: AppTools/ToolSub.py:131
msgid "Target"
msgstr "Target"

#: AppTools/ToolCalibration.py:236
msgid "Found Delta"
msgstr "Found Delta"

#: AppTools/ToolCalibration.py:248
msgid "Bot Left X"
msgstr "Bot Left X"

#: AppTools/ToolCalibration.py:257
msgid "Bot Left Y"
msgstr "Bot Left Y"

#: AppTools/ToolCalibration.py:275
msgid "Bot Right X"
msgstr "Bot Right X"

#: AppTools/ToolCalibration.py:285
msgid "Bot Right Y"
msgstr "Bot Right Y"

#: AppTools/ToolCalibration.py:300
msgid "Top Left X"
msgstr "Top Left X"

#: AppTools/ToolCalibration.py:309
msgid "Top Left Y"
msgstr "Top Left Y"

#: AppTools/ToolCalibration.py:324
msgid "Top Right X"
msgstr "Top Right X"

#: AppTools/ToolCalibration.py:334
msgid "Top Right Y"
msgstr "Top Right Y"

#: AppTools/ToolCalibration.py:367
msgid "Get Points"
msgstr "Get Points"

#: AppTools/ToolCalibration.py:369
msgid ""
"Pick four points by clicking on canvas if the source choice\n"
"is 'free' or inside the object geometry if the source is 'object'.\n"
"Those four points should be in the four squares of\n"
"the object."
msgstr ""
"Pick four points by clicking on canvas if the source choice\n"
"is 'free' or inside the object geometry if the source is 'object'.\n"
"Those four points should be in the four squares of\n"
"the object."

#: AppTools/ToolCalibration.py:390
msgid "STEP 2: Verification GCode"
msgstr "STEP 2: Verification GCode"

#: AppTools/ToolCalibration.py:392 AppTools/ToolCalibration.py:405
msgid ""
"Generate GCode file to locate and align the PCB by using\n"
"the four points acquired above.\n"
"The points sequence is:\n"
"- first point -> set the origin\n"
"- second point -> alignment point. Can be: top-left or bottom-right.\n"
"- third point -> check point. Can be: top-left or bottom-right.\n"
"- forth point -> final verification point. Just for evaluation."
msgstr ""
"Generate GCode file to locate and align the PCB by using\n"
"the four points acquired above.\n"
"The points sequence is:\n"
"- first point -> set the origin\n"
"- second point -> alignment point. Can be: top-left or bottom-right.\n"
"- third point -> check point. Can be: top-left or bottom-right.\n"
"- forth point -> final verification point. Just for evaluation."

#: AppTools/ToolCalibration.py:403 AppTools/ToolSolderPaste.py:348
msgid "Generate GCode"
msgstr "Generate GCode"

#: AppTools/ToolCalibration.py:429
msgid "STEP 3: Adjustments"
msgstr "STEP 3: Adjustments"

#: AppTools/ToolCalibration.py:431 AppTools/ToolCalibration.py:440
msgid ""
"Calculate Scale and Skew factors based on the differences (delta)\n"
"found when checking the PCB pattern. The differences must be filled\n"
"in the fields Found (Delta)."
msgstr ""
"Calculate Scale and Skew factors based on the differences (delta)\n"
"found when checking the PCB pattern. The differences must be filled\n"
"in the fields Found (Delta)."

#: AppTools/ToolCalibration.py:438
msgid "Calculate Factors"
msgstr "Calculate Factors"

#: AppTools/ToolCalibration.py:460
msgid "STEP 4: Adjusted GCode"
msgstr "STEP 4: Adjusted GCode"

#: AppTools/ToolCalibration.py:462
msgid ""
"Generate verification GCode file adjusted with\n"
"the factors above."
msgstr ""
"Generate verification GCode file adjusted with\n"
"the factors above."

#: AppTools/ToolCalibration.py:467
msgid "Scale Factor X:"
msgstr "Scale Factor X:"

#: AppTools/ToolCalibration.py:479
msgid "Scale Factor Y:"
msgstr "Scale Factor Y:"

#: AppTools/ToolCalibration.py:491
msgid "Apply Scale Factors"
msgstr "Apply Scale Factors"

#: AppTools/ToolCalibration.py:493
msgid "Apply Scale factors on the calibration points."
msgstr "Apply Scale factors on the calibration points."

#: AppTools/ToolCalibration.py:503
msgid "Skew Angle X:"
msgstr "Skew Angle X:"

#: AppTools/ToolCalibration.py:516
msgid "Skew Angle Y:"
msgstr "Skew Angle Y:"

#: AppTools/ToolCalibration.py:529
msgid "Apply Skew Factors"
msgstr "Apply Skew Factors"

#: AppTools/ToolCalibration.py:531
msgid "Apply Skew factors on the calibration points."
msgstr "Apply Skew factors on the calibration points."

#: AppTools/ToolCalibration.py:600
msgid "Generate Adjusted GCode"
msgstr "Generate Adjusted GCode"

#: AppTools/ToolCalibration.py:602
msgid ""
"Generate verification GCode file adjusted with\n"
"the factors set above.\n"
"The GCode parameters can be readjusted\n"
"before clicking this button."
msgstr ""
"Generate verification GCode file adjusted with\n"
"the factors set above.\n"
"The GCode parameters can be readjusted\n"
"before clicking this button."

#: AppTools/ToolCalibration.py:623
msgid "STEP 5: Calibrate FlatCAM Objects"
msgstr "STEP 5: Calibrate FlatCAM Objects"

#: AppTools/ToolCalibration.py:625
msgid ""
"Adjust the FlatCAM objects\n"
"with the factors determined and verified above."
msgstr ""
"Adjust the FlatCAM objects\n"
"with the factors determined and verified above."

#: AppTools/ToolCalibration.py:637
msgid "Adjusted object type"
msgstr "Adjusted object type"

#: AppTools/ToolCalibration.py:638
msgid "Type of the FlatCAM Object to be adjusted."
msgstr "Type of the FlatCAM Object to be adjusted."

#: AppTools/ToolCalibration.py:651
msgid "Adjusted object selection"
msgstr "Adjusted object selection"

#: AppTools/ToolCalibration.py:653
msgid "The FlatCAM Object to be adjusted."
msgstr "The FlatCAM Object to be adjusted."

#: AppTools/ToolCalibration.py:660
msgid "Calibrate"
msgstr "Calibrate"

#: AppTools/ToolCalibration.py:662
msgid ""
"Adjust (scale and/or skew) the objects\n"
"with the factors determined above."
msgstr ""
"Adjust (scale and/or skew) the objects\n"
"with the factors determined above."

#: AppTools/ToolCalibration.py:770 AppTools/ToolCalibration.py:771
msgid "Origin"
msgstr "Origin"

#: AppTools/ToolCalibration.py:800
msgid "Tool initialized"
msgstr "Tool initialized"

#: AppTools/ToolCalibration.py:838
msgid "There is no source FlatCAM object selected..."
msgstr "There is no source FlatCAM object selected..."

#: AppTools/ToolCalibration.py:859
msgid "Get First calibration point. Bottom Left..."
msgstr "Get First calibration point. Bottom Left..."

#: AppTools/ToolCalibration.py:926
msgid "Get Second calibration point. Bottom Right (Top Left)..."
msgstr "Get Second calibration point. Bottom Right (Top Left)..."

#: AppTools/ToolCalibration.py:930
msgid "Get Third calibration point. Top Left (Bottom Right)..."
msgstr "Get Third calibration point. Top Left (Bottom Right)..."

#: AppTools/ToolCalibration.py:934
msgid "Get Forth calibration point. Top Right..."
msgstr "Get Forth calibration point. Top Right..."

#: AppTools/ToolCalibration.py:938
msgid "Done. All four points have been acquired."
msgstr "Done. All four points have been acquired."

#: AppTools/ToolCalibration.py:969
msgid "Verification GCode for FlatCAM Calibration Tool"
msgstr "Verification GCode for FlatCAM Calibration Tool"

#: AppTools/ToolCalibration.py:981 AppTools/ToolCalibration.py:1067
msgid "Gcode Viewer"
msgstr "Gcode Viewer"

#: AppTools/ToolCalibration.py:997
msgid "Cancelled. Four points are needed for GCode generation."
msgstr "Cancelled. Four points are needed for GCode generation."

#: AppTools/ToolCalibration.py:1253 AppTools/ToolCalibration.py:1349
msgid "There is no FlatCAM object selected..."
msgstr "There is no FlatCAM object selected..."

#: AppTools/ToolCopperThieving.py:76 AppTools/ToolFiducials.py:261
msgid "Gerber Object to which will be added a copper thieving."
msgstr "Gerber Object to which will be added a copper thieving."

#: AppTools/ToolCopperThieving.py:98
msgid ""
"This set the distance between the copper thieving components\n"
"(the polygon fill may be split in multiple polygons)\n"
"and the copper traces in the Gerber file."
msgstr ""
"This set the distance between the copper thieving components\n"
"(the polygon fill may be split in multiple polygons)\n"
"and the copper traces in the Gerber file."

#: AppTools/ToolCopperThieving.py:131
msgid ""
"- 'Itself' - the copper thieving extent is based on the object extent.\n"
"- 'Area Selection' - left mouse click to start selection of the area to be "
"filled.\n"
"- 'Reference Object' - will do copper thieving within the area specified by "
"another object."
msgstr ""
"- 'Itself' - the copper thieving extent is based on the object extent.\n"
"- 'Area Selection' - left mouse click to start selection of the area to be "
"filled.\n"
"- 'Reference Object' - will do copper thieving within the area specified by "
"another object."

#: AppTools/ToolCopperThieving.py:138 AppTools/ToolNCC.py:552
#: AppTools/ToolPaint.py:495
msgid "Ref. Type"
msgstr "Ref. Type"

#: AppTools/ToolCopperThieving.py:140
msgid ""
"The type of FlatCAM object to be used as copper thieving reference.\n"
"It can be Gerber, Excellon or Geometry."
msgstr ""
"The type of FlatCAM object to be used as copper thieving reference.\n"
"It can be Gerber, Excellon or Geometry."

#: AppTools/ToolCopperThieving.py:149 AppTools/ToolNCC.py:562
#: AppTools/ToolPaint.py:505
msgid "Ref. Object"
msgstr "Ref. Object"

#: AppTools/ToolCopperThieving.py:151 AppTools/ToolNCC.py:564
#: AppTools/ToolPaint.py:507
msgid "The FlatCAM object to be used as non copper clearing reference."
msgstr "The FlatCAM object to be used as non copper clearing reference."

#: AppTools/ToolCopperThieving.py:327
msgid "Insert Copper thieving"
msgstr "Insert Copper thieving"

#: AppTools/ToolCopperThieving.py:329
msgid ""
"Will add a polygon (may be split in multiple parts)\n"
"that will surround the actual Gerber traces at a certain distance."
msgstr ""
"Will add a polygon (may be split in multiple parts)\n"
"that will surround the actual Gerber traces at a certain distance."

#: AppTools/ToolCopperThieving.py:388
msgid "Insert Robber Bar"
msgstr "Insert Robber Bar"

#: AppTools/ToolCopperThieving.py:390
msgid ""
"Will add a polygon with a defined thickness\n"
"that will surround the actual Gerber object\n"
"at a certain distance.\n"
"Required when doing holes pattern plating."
msgstr ""
"Will add a polygon with a defined thickness\n"
"that will surround the actual Gerber object\n"
"at a certain distance.\n"
"Required when doing holes pattern plating."

#: AppTools/ToolCopperThieving.py:414
msgid "Select Soldermask object"
msgstr "Select Soldermask object"

#: AppTools/ToolCopperThieving.py:416
msgid ""
"Gerber Object with the soldermask.\n"
"It will be used as a base for\n"
"the pattern plating mask."
msgstr ""
"Gerber Object with the soldermask.\n"
"It will be used as a base for\n"
"the pattern plating mask."

#: AppTools/ToolCopperThieving.py:445
msgid "Plated area"
msgstr "Plated area"

#: AppTools/ToolCopperThieving.py:447
msgid ""
"The area to be plated by pattern plating.\n"
"Basically is made from the openings in the plating mask.\n"
"\n"
"<<WARNING>> - the calculated area is actually a bit larger\n"
"due of the fact that the soldermask openings are by design\n"
"a bit larger than the copper pads, and this area is\n"
"calculated from the soldermask openings."
msgstr ""
"The area to be plated by pattern plating.\n"
"Basically is made from the openings in the plating mask.\n"
"\n"
"<<WARNING>> - the calculated area is actually a bit larger\n"
"due of the fact that the soldermask openings are by design\n"
"a bit larger than the copper pads, and this area is\n"
"calculated from the soldermask openings."

#: AppTools/ToolCopperThieving.py:458
msgid "mm"
msgstr "mm"

#: AppTools/ToolCopperThieving.py:460
msgid "in"
msgstr "in"

#: AppTools/ToolCopperThieving.py:467
msgid "Generate pattern plating mask"
msgstr "Generate pattern plating mask"

#: AppTools/ToolCopperThieving.py:469
msgid ""
"Will add to the soldermask gerber geometry\n"
"the geometries of the copper thieving and/or\n"
"the robber bar if those were generated."
msgstr ""
"Will add to the soldermask gerber geometry\n"
"the geometries of the copper thieving and/or\n"
"the robber bar if those were generated."

#: AppTools/ToolCopperThieving.py:625 AppTools/ToolCopperThieving.py:650
msgid "Lines Grid works only for 'itself' reference ..."
msgstr "Lines Grid works only for 'itself' reference ..."

#: AppTools/ToolCopperThieving.py:636
msgid "Solid fill selected."
msgstr "Solid fill selected."

#: AppTools/ToolCopperThieving.py:641
msgid "Dots grid fill selected."
msgstr "Dots grid fill selected."

#: AppTools/ToolCopperThieving.py:646
msgid "Squares grid fill selected."
msgstr "Squares grid fill selected."

#: AppTools/ToolCopperThieving.py:667 AppTools/ToolCopperThieving.py:749
#: AppTools/ToolCopperThieving.py:1351 AppTools/ToolCorners.py:251
#: AppTools/ToolDblSided.py:657 AppTools/ToolExtractDrills.py:436
#: AppTools/ToolFiducials.py:467 AppTools/ToolFiducials.py:744
#: AppTools/ToolOptimal.py:342 AppTools/ToolPunchGerber.py:512
#: AppTools/ToolQRCode.py:426
msgid "There is no Gerber object loaded ..."
msgstr "There is no Gerber object loaded ..."

#: AppTools/ToolCopperThieving.py:680 AppTools/ToolCopperThieving.py:1279
msgid "Append geometry"
msgstr "Append geometry"

#: AppTools/ToolCopperThieving.py:724 AppTools/ToolCopperThieving.py:1312
#: AppTools/ToolCopperThieving.py:1465
msgid "Append source file"
msgstr "Append source file"

#: AppTools/ToolCopperThieving.py:732 AppTools/ToolCopperThieving.py:1320
msgid "Copper Thieving Tool done."
msgstr "Copper Thieving Tool done."

#: AppTools/ToolCopperThieving.py:759 AppTools/ToolCopperThieving.py:792
#: AppTools/ToolCutOut.py:519 AppTools/ToolCutOut.py:724
#: AppTools/ToolInvertGerber.py:208 AppTools/ToolNCC.py:1599
#: AppTools/ToolNCC.py:1641 AppTools/ToolNCC.py:1670 AppTools/ToolPaint.py:1473
#: AppTools/ToolPanelize.py:423 AppTools/ToolPanelize.py:437
#: AppTools/ToolSub.py:294 AppTools/ToolSub.py:307 AppTools/ToolSub.py:498
#: AppTools/ToolSub.py:513 tclCommands/TclCommandCopperClear.py:97
#: tclCommands/TclCommandPaint.py:99
msgid "Could not retrieve object"
msgstr "Could not retrieve object"

#: AppTools/ToolCopperThieving.py:769 AppTools/ToolNCC.py:1649 Common.py:200
msgid "Click the start point of the area."
msgstr "Click the start point of the area."

#: AppTools/ToolCopperThieving.py:820
msgid "Click the end point of the filling area."
msgstr "Click the end point of the filling area."

#: AppTools/ToolCopperThieving.py:826 AppTools/ToolNCC.py:1711
#: AppTools/ToolNCC.py:1763 AppTools/ToolPaint.py:1605
#: AppTools/ToolPaint.py:1656 Common.py:256 Common.py:356
msgid "Zone added. Click to start adding next zone or right click to finish."
msgstr "Zone added. Click to start adding next zone or right click to finish."

#: AppTools/ToolCopperThieving.py:948 AppTools/ToolCopperThieving.py:952
#: AppTools/ToolCopperThieving.py:1013
msgid "Thieving"
msgstr "Thieving"

#: AppTools/ToolCopperThieving.py:959
msgid "Copper Thieving Tool started. Reading parameters."
msgstr "Copper Thieving Tool started. Reading parameters."

#: AppTools/ToolCopperThieving.py:984
msgid "Copper Thieving Tool. Preparing isolation polygons."
msgstr "Copper Thieving Tool. Preparing isolation polygons."

#: AppTools/ToolCopperThieving.py:1029
msgid "Copper Thieving Tool. Preparing areas to fill with copper."
msgstr "Copper Thieving Tool. Preparing areas to fill with copper."

#: AppTools/ToolCopperThieving.py:1040 AppTools/ToolOptimal.py:349
#: AppTools/ToolPanelize.py:810 AppTools/ToolRulesCheck.py:1127
msgid "Working..."
msgstr "Working..."

#: AppTools/ToolCopperThieving.py:1067
msgid "Geometry not supported for bounding box"
msgstr "Geometry not supported for bounding box"

#: AppTools/ToolCopperThieving.py:1073 AppTools/ToolNCC.py:1942
#: AppTools/ToolNCC.py:1997 AppTools/ToolNCC.py:3038 AppTools/ToolPaint.py:3385
msgid "No object available."
msgstr "No object available."

#: AppTools/ToolCopperThieving.py:1110 AppTools/ToolNCC.py:1967
#: AppTools/ToolNCC.py:2020 AppTools/ToolNCC.py:3080
msgid "The reference object type is not supported."
msgstr "The reference object type is not supported."

#: AppTools/ToolCopperThieving.py:1115
msgid "Copper Thieving Tool. Appending new geometry and buffering."
msgstr "Copper Thieving Tool. Appending new geometry and buffering."

#: AppTools/ToolCopperThieving.py:1131
msgid "Create geometry"
msgstr "Create geometry"

#: AppTools/ToolCopperThieving.py:1331 AppTools/ToolCopperThieving.py:1335
msgid "P-Plating Mask"
msgstr "P-Plating Mask"

#: AppTools/ToolCopperThieving.py:1357
msgid "Append PP-M geometry"
msgstr "Append PP-M geometry"

#: AppTools/ToolCopperThieving.py:1483
msgid "Generating Pattern Plating Mask done."
msgstr "Generating Pattern Plating Mask done."

#: AppTools/ToolCopperThieving.py:1555
msgid "Copper Thieving Tool exit."
msgstr "Copper Thieving Tool exit."

#: AppTools/ToolCorners.py:57
#| msgid "Gerber Object to which will be added a copper thieving."
msgid "The Gerber object that to which will be added corner markers."
msgstr "The Gerber object that to which will be added corner markers."

#: AppTools/ToolCorners.py:73
#| msgid "Location"
msgid "Locations"
msgstr "Locations"

#: AppTools/ToolCorners.py:75
msgid "Locations where to place corner markers."
msgstr "Locations where to place corner markers."

#: AppTools/ToolCorners.py:92 AppTools/ToolFiducials.py:99
msgid "Top Right"
msgstr "Top Right"

#: AppTools/ToolCorners.py:158
#| msgid "Add area"
msgid "Add Marker"
msgstr "Add Marker"

#: AppTools/ToolCorners.py:160
msgid "Will add corner markers to the selected Gerber file."
msgstr "Will add corner markers to the selected Gerber file."

#: AppTools/ToolCorners.py:225
#| msgid "QRCode Tool"
msgid "Corners Tool"
msgstr "Corners Tool"

#: AppTools/ToolCorners.py:288
msgid "Please select at least a location"
msgstr "Please select at least a location"

#: AppTools/ToolCorners.py:423
#| msgid "Copper Thieving Tool exit."
msgid "Corners Tool exit."
msgstr "Corners Tool exit."

#: AppTools/ToolCutOut.py:41
msgid "Cutout PCB"
msgstr "Cutout PCB"

#: AppTools/ToolCutOut.py:69 AppTools/ToolPanelize.py:53
msgid "Source Object"
msgstr "Source Object"

#: AppTools/ToolCutOut.py:70
msgid "Object to be cutout"
msgstr "Object to be cutout"

#: AppTools/ToolCutOut.py:75
msgid "Kind"
msgstr "Kind"

#: AppTools/ToolCutOut.py:97
msgid ""
"Specify the type of object to be cutout.\n"
"It can be of type: Gerber or Geometry.\n"
"What is selected here will dictate the kind\n"
"of objects that will populate the 'Object' combobox."
msgstr ""
"Specify the type of object to be cutout.\n"
"It can be of type: Gerber or Geometry.\n"
"What is selected here will dictate the kind\n"
"of objects that will populate the 'Object' combobox."

#: AppTools/ToolCutOut.py:121
msgid "Tool Parameters"
msgstr "Tool Parameters"

#: AppTools/ToolCutOut.py:238
msgid "A. Automatic Bridge Gaps"
msgstr "A. Automatic Bridge Gaps"

#: AppTools/ToolCutOut.py:240
msgid "This section handle creation of automatic bridge gaps."
msgstr "This section handle creation of automatic bridge gaps."

#: AppTools/ToolCutOut.py:247
msgid ""
"Number of gaps used for the Automatic cutout.\n"
"There can be maximum 8 bridges/gaps.\n"
"The choices are:\n"
"- None  - no gaps\n"
"- lr    - left + right\n"
"- tb    - top + bottom\n"
"- 4     - left + right +top + bottom\n"
"- 2lr   - 2*left + 2*right\n"
"- 2tb  - 2*top + 2*bottom\n"
"- 8     - 2*left + 2*right +2*top + 2*bottom"
msgstr ""
"Number of gaps used for the Automatic cutout.\n"
"There can be maximum 8 bridges/gaps.\n"
"The choices are:\n"
"- None  - no gaps\n"
"- lr    - left + right\n"
"- tb    - top + bottom\n"
"- 4     - left + right +top + bottom\n"
"- 2lr   - 2*left + 2*right\n"
"- 2tb  - 2*top + 2*bottom\n"
"- 8     - 2*left + 2*right +2*top + 2*bottom"

#: AppTools/ToolCutOut.py:269
msgid "Generate Freeform Geometry"
msgstr "Generate Freeform Geometry"

#: AppTools/ToolCutOut.py:271
msgid ""
"Cutout the selected object.\n"
"The cutout shape can be of any shape.\n"
"Useful when the PCB has a non-rectangular shape."
msgstr ""
"Cutout the selected object.\n"
"The cutout shape can be of any shape.\n"
"Useful when the PCB has a non-rectangular shape."

#: AppTools/ToolCutOut.py:283
msgid "Generate Rectangular Geometry"
msgstr "Generate Rectangular Geometry"

#: AppTools/ToolCutOut.py:285
msgid ""
"Cutout the selected object.\n"
"The resulting cutout shape is\n"
"always a rectangle shape and it will be\n"
"the bounding box of the Object."
msgstr ""
"Cutout the selected object.\n"
"The resulting cutout shape is\n"
"always a rectangle shape and it will be\n"
"the bounding box of the Object."

#: AppTools/ToolCutOut.py:304
msgid "B. Manual Bridge Gaps"
msgstr "B. Manual Bridge Gaps"

#: AppTools/ToolCutOut.py:306
msgid ""
"This section handle creation of manual bridge gaps.\n"
"This is done by mouse clicking on the perimeter of the\n"
"Geometry object that is used as a cutout object. "
msgstr ""
"This section handle creation of manual bridge gaps.\n"
"This is done by mouse clicking on the perimeter of the\n"
"Geometry object that is used as a cutout object. "

#: AppTools/ToolCutOut.py:321
msgid "Geometry object used to create the manual cutout."
msgstr "Geometry object used to create the manual cutout."

#: AppTools/ToolCutOut.py:328
msgid "Generate Manual Geometry"
msgstr "Generate Manual Geometry"

#: AppTools/ToolCutOut.py:330
msgid ""
"If the object to be cutout is a Gerber\n"
"first create a Geometry that surrounds it,\n"
"to be used as the cutout, if one doesn't exist yet.\n"
"Select the source Gerber file in the top object combobox."
msgstr ""
"If the object to be cutout is a Gerber\n"
"first create a Geometry that surrounds it,\n"
"to be used as the cutout, if one doesn't exist yet.\n"
"Select the source Gerber file in the top object combobox."

#: AppTools/ToolCutOut.py:343
msgid "Manual Add Bridge Gaps"
msgstr "Manual Add Bridge Gaps"

#: AppTools/ToolCutOut.py:345
msgid ""
"Use the left mouse button (LMB) click\n"
"to create a bridge gap to separate the PCB from\n"
"the surrounding material.\n"
"The LMB click has to be done on the perimeter of\n"
"the Geometry object used as a cutout geometry."
msgstr ""
"Use the left mouse button (LMB) click\n"
"to create a bridge gap to separate the PCB from\n"
"the surrounding material.\n"
"The LMB click has to be done on the perimeter of\n"
"the Geometry object used as a cutout geometry."

#: AppTools/ToolCutOut.py:524
msgid ""
"There is no object selected for Cutout.\n"
"Select one and try again."
msgstr ""
"There is no object selected for Cutout.\n"
"Select one and try again."

#: AppTools/ToolCutOut.py:530 AppTools/ToolCutOut.py:733
#: AppTools/ToolCutOut.py:914 AppTools/ToolCutOut.py:996
#: tclCommands/TclCommandGeoCutout.py:184
msgid "Tool Diameter is zero value. Change it to a positive real number."
msgstr "Tool Diameter is zero value. Change it to a positive real number."

#: AppTools/ToolCutOut.py:544 AppTools/ToolCutOut.py:748
msgid "Number of gaps value is missing. Add it and retry."
msgstr "Number of gaps value is missing. Add it and retry."

#: AppTools/ToolCutOut.py:549 AppTools/ToolCutOut.py:752
msgid ""
"Gaps value can be only one of: 'None', 'lr', 'tb', '2lr', '2tb', 4 or 8. "
"Fill in a correct value and retry. "
msgstr ""
"Gaps value can be only one of: 'None', 'lr', 'tb', '2lr', '2tb', 4 or 8. "
"Fill in a correct value and retry. "

#: AppTools/ToolCutOut.py:554 AppTools/ToolCutOut.py:758
msgid ""
"Cutout operation cannot be done on a multi-geo Geometry.\n"
"Optionally, this Multi-geo Geometry can be converted to Single-geo "
"Geometry,\n"
"and after that perform Cutout."
msgstr ""
"Cutout operation cannot be done on a multi-geo Geometry.\n"
"Optionally, this Multi-geo Geometry can be converted to Single-geo "
"Geometry,\n"
"and after that perform Cutout."

#: AppTools/ToolCutOut.py:706 AppTools/ToolCutOut.py:903
msgid "Any form CutOut operation finished."
msgstr "Any form CutOut operation finished."

#: AppTools/ToolCutOut.py:728 AppTools/ToolInvertGerber.py:214
#: AppTools/ToolNCC.py:1603 AppTools/ToolPaint.py:1396
#: AppTools/ToolPanelize.py:428 tclCommands/TclCommandBbox.py:71
#: tclCommands/TclCommandNregions.py:71
msgid "Object not found"
msgstr "Object not found"

#: AppTools/ToolCutOut.py:872
msgid "Rectangular cutout with negative margin is not possible."
msgstr "Rectangular cutout with negative margin is not possible."

#: AppTools/ToolCutOut.py:908
msgid ""
"Click on the selected geometry object perimeter to create a bridge gap ..."
msgstr ""
"Click on the selected geometry object perimeter to create a bridge gap ..."

#: AppTools/ToolCutOut.py:925 AppTools/ToolCutOut.py:951
msgid "Could not retrieve Geometry object"
msgstr "Could not retrieve Geometry object"

#: AppTools/ToolCutOut.py:956
msgid "Geometry object for manual cutout not found"
msgstr "Geometry object for manual cutout not found"

#: AppTools/ToolCutOut.py:966
msgid "Added manual Bridge Gap."
msgstr "Added manual Bridge Gap."

#: AppTools/ToolCutOut.py:978
msgid "Could not retrieve Gerber object"
msgstr "Could not retrieve Gerber object"

#: AppTools/ToolCutOut.py:983
msgid ""
"There is no Gerber object selected for Cutout.\n"
"Select one and try again."
msgstr ""
"There is no Gerber object selected for Cutout.\n"
"Select one and try again."

#: AppTools/ToolCutOut.py:989
msgid ""
"The selected object has to be of Gerber type.\n"
"Select a Gerber file and try again."
msgstr ""
"The selected object has to be of Gerber type.\n"
"Select a Gerber file and try again."

#: AppTools/ToolCutOut.py:1024
msgid "Geometry not supported for cutout"
msgstr "Geometry not supported for cutout"

#: AppTools/ToolCutOut.py:1099
msgid "Making manual bridge gap..."
msgstr "Making manual bridge gap..."

#: AppTools/ToolDblSided.py:26
msgid "2-Sided PCB"
msgstr "2-Sided PCB"

#: AppTools/ToolDblSided.py:52
msgid "Mirror Operation"
msgstr "Mirror Operation"

#: AppTools/ToolDblSided.py:53
msgid "Objects to be mirrored"
msgstr "Objects to be mirrored"

#: AppTools/ToolDblSided.py:65
msgid "Gerber to be mirrored"
msgstr "Gerber to be mirrored"

#: AppTools/ToolDblSided.py:69 AppTools/ToolDblSided.py:97
#: AppTools/ToolDblSided.py:127
msgid ""
"Mirrors (flips) the specified object around \n"
"the specified axis. Does not create a new \n"
"object, but modifies it."
msgstr ""
"Mirrors (flips) the specified object around \n"
"the specified axis. Does not create a new \n"
"object, but modifies it."

#: AppTools/ToolDblSided.py:93
msgid "Excellon Object to be mirrored."
msgstr "Excellon Object to be mirrored."

#: AppTools/ToolDblSided.py:122
msgid "Geometry Obj to be mirrored."
msgstr "Geometry Obj to be mirrored."

#: AppTools/ToolDblSided.py:158
msgid "Mirror Parameters"
msgstr "Mirror Parameters"

#: AppTools/ToolDblSided.py:159
msgid "Parameters for the mirror operation"
msgstr "Parameters for the mirror operation"

#: AppTools/ToolDblSided.py:164
msgid "Mirror Axis"
msgstr "Mirror Axis"

#: AppTools/ToolDblSided.py:175
msgid ""
"The coordinates used as reference for the mirror operation.\n"
"Can be:\n"
"- Point -> a set of coordinates (x,y) around which the object is mirrored\n"
"- Box -> a set of coordinates (x, y) obtained from the center of the\n"
"bounding box of another object selected below"
msgstr ""
"The coordinates used as reference for the mirror operation.\n"
"Can be:\n"
"- Point -> a set of coordinates (x,y) around which the object is mirrored\n"
"- Box -> a set of coordinates (x, y) obtained from the center of the\n"
"bounding box of another object selected below"

#: AppTools/ToolDblSided.py:189
msgid "Point coordinates"
msgstr "Point coordinates"

#: AppTools/ToolDblSided.py:194
msgid ""
"Add the coordinates in format <b>(x, y)</b> through which the mirroring "
"axis\n"
" selected in 'MIRROR AXIS' pass.\n"
"The (x, y) coordinates are captured by pressing SHIFT key\n"
"and left mouse button click on canvas or you can enter the coordinates "
"manually."
msgstr ""
"Add the coordinates in format <b>(x, y)</b> through which the mirroring "
"axis\n"
" selected in 'MIRROR AXIS' pass.\n"
"The (x, y) coordinates are captured by pressing SHIFT key\n"
"and left mouse button click on canvas or you can enter the coordinates "
"manually."

#: AppTools/ToolDblSided.py:218
msgid ""
"It can be of type: Gerber or Excellon or Geometry.\n"
"The coordinates of the center of the bounding box are used\n"
"as reference for mirror operation."
msgstr ""
"It can be of type: Gerber or Excellon or Geometry.\n"
"The coordinates of the center of the bounding box are used\n"
"as reference for mirror operation."

#: AppTools/ToolDblSided.py:252
msgid "Bounds Values"
msgstr "Bounds Values"

#: AppTools/ToolDblSided.py:254
msgid ""
"Select on canvas the object(s)\n"
"for which to calculate bounds values."
msgstr ""
"Select on canvas the object(s)\n"
"for which to calculate bounds values."

#: AppTools/ToolDblSided.py:264
msgid "X min"
msgstr "X min"

#: AppTools/ToolDblSided.py:266 AppTools/ToolDblSided.py:280
msgid "Minimum location."
msgstr "Minimum location."

#: AppTools/ToolDblSided.py:278
msgid "Y min"
msgstr "Y min"

#: AppTools/ToolDblSided.py:292
msgid "X max"
msgstr "X max"

#: AppTools/ToolDblSided.py:294 AppTools/ToolDblSided.py:308
msgid "Maximum location."
msgstr "Maximum location."

#: AppTools/ToolDblSided.py:306
msgid "Y max"
msgstr "Y max"

#: AppTools/ToolDblSided.py:317
msgid "Center point coordinates"
msgstr "Center point coordinates"

#: AppTools/ToolDblSided.py:319
msgid "Centroid"
msgstr "Centroid"

#: AppTools/ToolDblSided.py:321
msgid ""
"The center point location for the rectangular\n"
"bounding shape. Centroid. Format is (x, y)."
msgstr ""
"The center point location for the rectangular\n"
"bounding shape. Centroid. Format is (x, y)."

#: AppTools/ToolDblSided.py:330
msgid "Calculate Bounds Values"
msgstr "Calculate Bounds Values"

#: AppTools/ToolDblSided.py:332
msgid ""
"Calculate the enveloping rectangular shape coordinates,\n"
"for the selection of objects.\n"
"The envelope shape is parallel with the X, Y axis."
msgstr ""
"Calculate the enveloping rectangular shape coordinates,\n"
"for the selection of objects.\n"
"The envelope shape is parallel with the X, Y axis."

#: AppTools/ToolDblSided.py:352
msgid "PCB Alignment"
msgstr "PCB Alignment"

#: AppTools/ToolDblSided.py:354 AppTools/ToolDblSided.py:456
msgid ""
"Creates an Excellon Object containing the\n"
"specified alignment holes and their mirror\n"
"images."
msgstr ""
"Creates an Excellon Object containing the\n"
"specified alignment holes and their mirror\n"
"images."

#: AppTools/ToolDblSided.py:361
msgid "Drill Diameter"
msgstr "Drill Diameter"

#: AppTools/ToolDblSided.py:390 AppTools/ToolDblSided.py:397
msgid ""
"The reference point used to create the second alignment drill\n"
"from the first alignment drill, by doing mirror.\n"
"It can be modified in the Mirror Parameters -> Reference section"
msgstr ""
"The reference point used to create the second alignment drill\n"
"from the first alignment drill, by doing mirror.\n"
"It can be modified in the Mirror Parameters -> Reference section"

#: AppTools/ToolDblSided.py:410
msgid "Alignment Drill Coordinates"
msgstr "Alignment Drill Coordinates"

#: AppTools/ToolDblSided.py:412
msgid ""
"Alignment holes (x1, y1), (x2, y2), ... on one side of the mirror axis. For "
"each set of (x, y) coordinates\n"
"entered here, a pair of drills will be created:\n"
"\n"
"- one drill at the coordinates from the field\n"
"- one drill in mirror position over the axis selected above in the 'Align "
"Axis'."
msgstr ""
"Alignment holes (x1, y1), (x2, y2), ... on one side of the mirror axis. For "
"each set of (x, y) coordinates\n"
"entered here, a pair of drills will be created:\n"
"\n"
"- one drill at the coordinates from the field\n"
"- one drill in mirror position over the axis selected above in the 'Align "
"Axis'."

#: AppTools/ToolDblSided.py:420
msgid "Drill coordinates"
msgstr "Drill coordinates"

#: AppTools/ToolDblSided.py:427
msgid ""
"Add alignment drill holes coordinates in the format: (x1, y1), (x2, "
"y2), ... \n"
"on one side of the alignment axis.\n"
"\n"
"The coordinates set can be obtained:\n"
"- press SHIFT key and left mouse clicking on canvas. Then click Add.\n"
"- press SHIFT key and left mouse clicking on canvas. Then Ctrl+V in the "
"field.\n"
"- press SHIFT key and left mouse clicking on canvas. Then RMB click in the "
"field and click Paste.\n"
"- by entering the coords manually in the format: (x1, y1), (x2, y2), ..."
msgstr ""
"Add alignment drill holes coordinates in the format: (x1, y1), (x2, "
"y2), ... \n"
"on one side of the alignment axis.\n"
"\n"
"The coordinates set can be obtained:\n"
"- press SHIFT key and left mouse clicking on canvas. Then click Add.\n"
"- press SHIFT key and left mouse clicking on canvas. Then Ctrl+V in the "
"field.\n"
"- press SHIFT key and left mouse clicking on canvas. Then RMB click in the "
"field and click Paste.\n"
"- by entering the coords manually in the format: (x1, y1), (x2, y2), ..."

#: AppTools/ToolDblSided.py:442
msgid "Delete Last"
msgstr "Delete Last"

#: AppTools/ToolDblSided.py:444
msgid "Delete the last coordinates tuple in the list."
msgstr "Delete the last coordinates tuple in the list."

#: AppTools/ToolDblSided.py:454
msgid "Create Excellon Object"
msgstr "Create Excellon Object"

#: AppTools/ToolDblSided.py:541
msgid "2-Sided Tool"
msgstr "2-Sided Tool"

#: AppTools/ToolDblSided.py:581
msgid ""
"'Point' reference is selected and 'Point' coordinates are missing. Add them "
"and retry."
msgstr ""
"'Point' reference is selected and 'Point' coordinates are missing. Add them "
"and retry."

#: AppTools/ToolDblSided.py:600
msgid "There is no Box reference object loaded. Load one and retry."
msgstr "There is no Box reference object loaded. Load one and retry."

#: AppTools/ToolDblSided.py:612
msgid "No value or wrong format in Drill Dia entry. Add it and retry."
msgstr "No value or wrong format in Drill Dia entry. Add it and retry."

#: AppTools/ToolDblSided.py:623
msgid "There are no Alignment Drill Coordinates to use. Add them and retry."
msgstr "There are no Alignment Drill Coordinates to use. Add them and retry."

#: AppTools/ToolDblSided.py:648
msgid "Excellon object with alignment drills created..."
msgstr "Excellon object with alignment drills created..."

#: AppTools/ToolDblSided.py:661 AppTools/ToolDblSided.py:704
#: AppTools/ToolDblSided.py:748
msgid "Only Gerber, Excellon and Geometry objects can be mirrored."
msgstr "Only Gerber, Excellon and Geometry objects can be mirrored."

#: AppTools/ToolDblSided.py:671 AppTools/ToolDblSided.py:715
msgid ""
"There are no Point coordinates in the Point field. Add coords and try "
"again ..."
msgstr ""
"There are no Point coordinates in the Point field. Add coords and try "
"again ..."

#: AppTools/ToolDblSided.py:681 AppTools/ToolDblSided.py:725
#: AppTools/ToolDblSided.py:762
msgid "There is no Box object loaded ..."
msgstr "There is no Box object loaded ..."

#: AppTools/ToolDblSided.py:691 AppTools/ToolDblSided.py:735
#: AppTools/ToolDblSided.py:772
msgid "was mirrored"
msgstr "was mirrored"

#: AppTools/ToolDblSided.py:700 AppTools/ToolPunchGerber.py:533
msgid "There is no Excellon object loaded ..."
msgstr "There is no Excellon object loaded ..."

#: AppTools/ToolDblSided.py:744
msgid "There is no Geometry object loaded ..."
msgstr "There is no Geometry object loaded ..."

#: AppTools/ToolDblSided.py:818 App_Main.py:4572 App_Main.py:4727
msgid "Failed. No object(s) selected..."
msgstr "Failed. No object(s) selected..."

#: AppTools/ToolDistance.py:57 AppTools/ToolDistanceMin.py:50
msgid "Those are the units in which the distance is measured."
msgstr "Those are the units in which the distance is measured."

#: AppTools/ToolDistance.py:58 AppTools/ToolDistanceMin.py:51
msgid "METRIC (mm)"
msgstr "METRIC (mm)"

#: AppTools/ToolDistance.py:58 AppTools/ToolDistanceMin.py:51
msgid "INCH (in)"
msgstr "INCH (in)"

#: AppTools/ToolDistance.py:64
msgid "Snap to center"
msgstr "Snap to center"

#: AppTools/ToolDistance.py:66
msgid ""
"Mouse cursor will snap to the center of the pad/drill\n"
"when it is hovering over the geometry of the pad/drill."
msgstr ""
"Mouse cursor will snap to the center of the pad/drill\n"
"when it is hovering over the geometry of the pad/drill."

#: AppTools/ToolDistance.py:76
msgid "Start Coords"
msgstr "Start Coords"

#: AppTools/ToolDistance.py:77 AppTools/ToolDistance.py:82
msgid "This is measuring Start point coordinates."
msgstr "This is measuring Start point coordinates."

#: AppTools/ToolDistance.py:87
msgid "Stop Coords"
msgstr "Stop Coords"

#: AppTools/ToolDistance.py:88 AppTools/ToolDistance.py:93
msgid "This is the measuring Stop point coordinates."
msgstr "This is the measuring Stop point coordinates."

#: AppTools/ToolDistance.py:98 AppTools/ToolDistanceMin.py:62
msgid "Dx"
msgstr "Dx"

#: AppTools/ToolDistance.py:99 AppTools/ToolDistance.py:104
#: AppTools/ToolDistanceMin.py:63 AppTools/ToolDistanceMin.py:92
msgid "This is the distance measured over the X axis."
msgstr "This is the distance measured over the X axis."

#: AppTools/ToolDistance.py:109 AppTools/ToolDistanceMin.py:65
msgid "Dy"
msgstr "Dy"

#: AppTools/ToolDistance.py:110 AppTools/ToolDistance.py:115
#: AppTools/ToolDistanceMin.py:66 AppTools/ToolDistanceMin.py:97
msgid "This is the distance measured over the Y axis."
msgstr "This is the distance measured over the Y axis."

#: AppTools/ToolDistance.py:121 AppTools/ToolDistance.py:126
#: AppTools/ToolDistanceMin.py:69 AppTools/ToolDistanceMin.py:102
msgid "This is orientation angle of the measuring line."
msgstr "This is orientation angle of the measuring line."

#: AppTools/ToolDistance.py:131 AppTools/ToolDistanceMin.py:71
msgid "DISTANCE"
msgstr "DISTANCE"

#: AppTools/ToolDistance.py:132 AppTools/ToolDistance.py:137
msgid "This is the point to point Euclidian distance."
msgstr "This is the point to point Euclidian distance."

#: AppTools/ToolDistance.py:142 AppTools/ToolDistance.py:339
#: AppTools/ToolDistanceMin.py:114
msgid "Measure"
msgstr "Measure"

#: AppTools/ToolDistance.py:274
msgid "Working"
msgstr "Working"

#: AppTools/ToolDistance.py:279
msgid "MEASURING: Click on the Start point ..."
msgstr "MEASURING: Click on the Start point ..."

#: AppTools/ToolDistance.py:389
msgid "Distance Tool finished."
msgstr "Distance Tool finished."

#: AppTools/ToolDistance.py:461
msgid "Pads overlapped. Aborting."
msgstr "Pads overlapped. Aborting."

#: AppTools/ToolDistance.py:489
#| msgid "Distance Tool finished."
msgid "Distance Tool cancelled."
msgstr "Distance Tool cancelled."

#: AppTools/ToolDistance.py:494
msgid "MEASURING: Click on the Destination point ..."
msgstr "MEASURING: Click on the Destination point ..."

#: AppTools/ToolDistance.py:503 AppTools/ToolDistanceMin.py:284
msgid "MEASURING"
msgstr "MEASURING"

#: AppTools/ToolDistance.py:504 AppTools/ToolDistanceMin.py:285
msgid "Result"
msgstr "Result"

#: AppTools/ToolDistanceMin.py:31 AppTools/ToolDistanceMin.py:143
msgid "Minimum Distance Tool"
msgstr "Minimum Distance Tool"

#: AppTools/ToolDistanceMin.py:54
msgid "First object point"
msgstr "First object point"

#: AppTools/ToolDistanceMin.py:55 AppTools/ToolDistanceMin.py:80
msgid ""
"This is first object point coordinates.\n"
"This is the start point for measuring distance."
msgstr ""
"This is first object point coordinates.\n"
"This is the start point for measuring distance."

#: AppTools/ToolDistanceMin.py:58
msgid "Second object point"
msgstr "Second object point"

#: AppTools/ToolDistanceMin.py:59 AppTools/ToolDistanceMin.py:86
msgid ""
"This is second object point coordinates.\n"
"This is the end point for measuring distance."
msgstr ""
"This is second object point coordinates.\n"
"This is the end point for measuring distance."

#: AppTools/ToolDistanceMin.py:72 AppTools/ToolDistanceMin.py:107
msgid "This is the point to point Euclidean distance."
msgstr "This is the point to point Euclidean distance."

#: AppTools/ToolDistanceMin.py:74
msgid "Half Point"
msgstr "Half Point"

#: AppTools/ToolDistanceMin.py:75 AppTools/ToolDistanceMin.py:112
msgid "This is the middle point of the point to point Euclidean distance."
msgstr "This is the middle point of the point to point Euclidean distance."

#: AppTools/ToolDistanceMin.py:117
msgid "Jump to Half Point"
msgstr "Jump to Half Point"

#: AppTools/ToolDistanceMin.py:154
msgid ""
"Select two objects and no more, to measure the distance between them ..."
msgstr ""
"Select two objects and no more, to measure the distance between them ..."

#: AppTools/ToolDistanceMin.py:195 AppTools/ToolDistanceMin.py:216
#: AppTools/ToolDistanceMin.py:225 AppTools/ToolDistanceMin.py:246
msgid "Select two objects and no more. Currently the selection has objects: "
msgstr "Select two objects and no more. Currently the selection has objects: "

#: AppTools/ToolDistanceMin.py:293
msgid "Objects intersects or touch at"
msgstr "Objects intersects or touch at"

#: AppTools/ToolDistanceMin.py:299
msgid "Jumped to the half point between the two selected objects"
msgstr "Jumped to the half point between the two selected objects"

#: AppTools/ToolExtractDrills.py:29 AppTools/ToolExtractDrills.py:295
msgid "Extract Drills"
msgstr "Extract Drills"

#: AppTools/ToolExtractDrills.py:62
msgid "Gerber from which to extract drill holes"
msgstr "Gerber from which to extract drill holes"

#: AppTools/ToolExtractDrills.py:297
msgid "Extract drills from a given Gerber file."
msgstr "Extract drills from a given Gerber file."

#: AppTools/ToolExtractDrills.py:478 AppTools/ToolExtractDrills.py:563
#: AppTools/ToolExtractDrills.py:648
msgid "No drills extracted. Try different parameters."
msgstr "No drills extracted. Try different parameters."

#: AppTools/ToolFiducials.py:56
msgid "Fiducials Coordinates"
msgstr "Fiducials Coordinates"

#: AppTools/ToolFiducials.py:58
msgid ""
"A table with the fiducial points coordinates,\n"
"in the format (x, y)."
msgstr ""
"A table with the fiducial points coordinates,\n"
"in the format (x, y)."

#: AppTools/ToolFiducials.py:191
msgid ""
"- 'Auto' - automatic placement of fiducials in the corners of the bounding "
"box.\n"
" - 'Manual' - manual placement of fiducials."
msgstr ""
"- 'Auto' - automatic placement of fiducials in the corners of the bounding "
"box.\n"
" - 'Manual' - manual placement of fiducials."

#: AppTools/ToolFiducials.py:237
msgid "Thickness of the line that makes the fiducial."
msgstr "Thickness of the line that makes the fiducial."

#: AppTools/ToolFiducials.py:259
msgid "Copper Gerber"
msgstr "Copper Gerber"

#: AppTools/ToolFiducials.py:268
msgid "Add Fiducial"
msgstr "Add Fiducial"

#: AppTools/ToolFiducials.py:270
msgid "Will add a polygon on the copper layer to serve as fiducial."
msgstr "Will add a polygon on the copper layer to serve as fiducial."

#: AppTools/ToolFiducials.py:286
msgid "Soldermask Gerber"
msgstr "Soldermask Gerber"

#: AppTools/ToolFiducials.py:288
msgid "The Soldermask Gerber object."
msgstr "The Soldermask Gerber object."

#: AppTools/ToolFiducials.py:300
msgid "Add Soldermask Opening"
msgstr "Add Soldermask Opening"

#: AppTools/ToolFiducials.py:302
msgid ""
"Will add a polygon on the soldermask layer\n"
"to serve as fiducial opening.\n"
"The diameter is always double of the diameter\n"
"for the copper fiducial."
msgstr ""
"Will add a polygon on the soldermask layer\n"
"to serve as fiducial opening.\n"
"The diameter is always double of the diameter\n"
"for the copper fiducial."

#: AppTools/ToolFiducials.py:517
msgid "Click to add first Fiducial. Bottom Left..."
msgstr "Click to add first Fiducial. Bottom Left..."

#: AppTools/ToolFiducials.py:781
msgid "Click to add the last fiducial. Top Right..."
msgstr "Click to add the last fiducial. Top Right..."

#: AppTools/ToolFiducials.py:786
msgid "Click to add the second fiducial. Top Left or Bottom Right..."
msgstr "Click to add the second fiducial. Top Left or Bottom Right..."

#: AppTools/ToolFiducials.py:789 AppTools/ToolFiducials.py:798
msgid "Done. All fiducials have been added."
msgstr "Done. All fiducials have been added."

#: AppTools/ToolFiducials.py:875
msgid "Fiducials Tool exit."
msgstr "Fiducials Tool exit."

#: AppTools/ToolFilm.py:42
msgid "Film PCB"
msgstr "Film PCB"

#: AppTools/ToolFilm.py:73
msgid ""
"Specify the type of object for which to create the film.\n"
"The object can be of type: Gerber or Geometry.\n"
"The selection here decide the type of objects that will be\n"
"in the Film Object combobox."
msgstr ""
"Specify the type of object for which to create the film.\n"
"The object can be of type: Gerber or Geometry.\n"
"The selection here decide the type of objects that will be\n"
"in the Film Object combobox."

#: AppTools/ToolFilm.py:96
msgid ""
"Specify the type of object to be used as an container for\n"
"film creation. It can be: Gerber or Geometry type.The selection here decide "
"the type of objects that will be\n"
"in the Box Object combobox."
msgstr ""
"Specify the type of object to be used as an container for\n"
"film creation. It can be: Gerber or Geometry type.The selection here decide "
"the type of objects that will be\n"
"in the Box Object combobox."

#: AppTools/ToolFilm.py:256
msgid "Film Parameters"
msgstr "Film Parameters"

#: AppTools/ToolFilm.py:317
msgid "Punch drill holes"
msgstr "Punch drill holes"

#: AppTools/ToolFilm.py:318
msgid ""
"When checked the generated film will have holes in pads when\n"
"the generated film is positive. This is done to help drilling,\n"
"when done manually."
msgstr ""
"When checked the generated film will have holes in pads when\n"
"the generated film is positive. This is done to help drilling,\n"
"when done manually."

#: AppTools/ToolFilm.py:336
msgid "Source"
msgstr "Source"

#: AppTools/ToolFilm.py:338
msgid ""
"The punch hole source can be:\n"
"- Excellon -> an Excellon holes center will serve as reference.\n"
"- Pad Center -> will try to use the pads center as reference."
msgstr ""
"The punch hole source can be:\n"
"- Excellon -> an Excellon holes center will serve as reference.\n"
"- Pad Center -> will try to use the pads center as reference."

#: AppTools/ToolFilm.py:343
msgid "Pad center"
msgstr "Pad center"

#: AppTools/ToolFilm.py:348
msgid "Excellon Obj"
msgstr "Excellon Obj"

#: AppTools/ToolFilm.py:350
msgid ""
"Remove the geometry of Excellon from the Film to create the holes in pads."
msgstr ""
"Remove the geometry of Excellon from the Film to create the holes in pads."

#: AppTools/ToolFilm.py:364
msgid "Punch Size"
msgstr "Punch Size"

#: AppTools/ToolFilm.py:365
msgid "The value here will control how big is the punch hole in the pads."
msgstr "The value here will control how big is the punch hole in the pads."

#: AppTools/ToolFilm.py:485
msgid "Save Film"
msgstr "Save Film"

#: AppTools/ToolFilm.py:487
msgid ""
"Create a Film for the selected object, within\n"
"the specified box. Does not create a new \n"
" FlatCAM object, but directly save it in the\n"
"selected format."
msgstr ""
"Create a Film for the selected object, within\n"
"the specified box. Does not create a new \n"
" FlatCAM object, but directly save it in the\n"
"selected format."

#: AppTools/ToolFilm.py:649
msgid ""
"Using the Pad center does not work on Geometry objects. Only a Gerber object "
"has pads."
msgstr ""
"Using the Pad center does not work on Geometry objects. Only a Gerber object "
"has pads."

#: AppTools/ToolFilm.py:659
msgid "No FlatCAM object selected. Load an object for Film and retry."
msgstr "No FlatCAM object selected. Load an object for Film and retry."

#: AppTools/ToolFilm.py:666
msgid "No FlatCAM object selected. Load an object for Box and retry."
msgstr "No FlatCAM object selected. Load an object for Box and retry."

#: AppTools/ToolFilm.py:670
msgid "No FlatCAM object selected."
msgstr "No FlatCAM object selected."

#: AppTools/ToolFilm.py:681
msgid "Generating Film ..."
msgstr "Generating Film ..."

#: AppTools/ToolFilm.py:730 AppTools/ToolFilm.py:734
msgid "Export positive film"
msgstr "Export positive film"

#: AppTools/ToolFilm.py:767
msgid ""
"No Excellon object selected. Load an object for punching reference and retry."
msgstr ""
"No Excellon object selected. Load an object for punching reference and retry."

#: AppTools/ToolFilm.py:791
msgid ""
" Could not generate punched hole film because the punch hole sizeis bigger "
"than some of the apertures in the Gerber object."
msgstr ""
" Could not generate punched hole film because the punch hole sizeis bigger "
"than some of the apertures in the Gerber object."

#: AppTools/ToolFilm.py:803
msgid ""
"Could not generate punched hole film because the punch hole sizeis bigger "
"than some of the apertures in the Gerber object."
msgstr ""
"Could not generate punched hole film because the punch hole sizeis bigger "
"than some of the apertures in the Gerber object."

#: AppTools/ToolFilm.py:821
msgid ""
"Could not generate punched hole film because the newly created object "
"geometry is the same as the one in the source object geometry..."
msgstr ""
"Could not generate punched hole film because the newly created object "
"geometry is the same as the one in the source object geometry..."

#: AppTools/ToolFilm.py:876 AppTools/ToolFilm.py:880
msgid "Export negative film"
msgstr "Export negative film"

#: AppTools/ToolFilm.py:941 AppTools/ToolFilm.py:1124
#: AppTools/ToolPanelize.py:441
msgid "No object Box. Using instead"
msgstr "No object Box. Using instead"

#: AppTools/ToolFilm.py:1057 AppTools/ToolFilm.py:1237
msgid "Film file exported to"
msgstr "Film file exported to"

#: AppTools/ToolFilm.py:1060 AppTools/ToolFilm.py:1240
msgid "Generating Film ... Please wait."
msgstr "Generating Film ... Please wait."

#: AppTools/ToolImage.py:24
msgid "Image as Object"
msgstr "Image as Object"

#: AppTools/ToolImage.py:33
msgid "Image to PCB"
msgstr "Image to PCB"

#: AppTools/ToolImage.py:56
msgid ""
"Specify the type of object to create from the image.\n"
"It can be of type: Gerber or Geometry."
msgstr ""
"Specify the type of object to create from the image.\n"
"It can be of type: Gerber or Geometry."

#: AppTools/ToolImage.py:65
msgid "DPI value"
msgstr "DPI value"

#: AppTools/ToolImage.py:66
msgid "Specify a DPI value for the image."
msgstr "Specify a DPI value for the image."

#: AppTools/ToolImage.py:72
msgid "Level of detail"
msgstr "Level of detail"

#: AppTools/ToolImage.py:81
msgid "Image type"
msgstr "Image type"

#: AppTools/ToolImage.py:83
msgid ""
"Choose a method for the image interpretation.\n"
"B/W means a black & white image. Color means a colored image."
msgstr ""
"Choose a method for the image interpretation.\n"
"B/W means a black & white image. Color means a colored image."

#: AppTools/ToolImage.py:92 AppTools/ToolImage.py:107 AppTools/ToolImage.py:120
#: AppTools/ToolImage.py:133
msgid "Mask value"
msgstr "Mask value"

#: AppTools/ToolImage.py:94
msgid ""
"Mask for monochrome image.\n"
"Takes values between [0 ... 255].\n"
"Decides the level of details to include\n"
"in the resulting geometry.\n"
"0 means no detail and 255 means everything \n"
"(which is totally black)."
msgstr ""
"Mask for monochrome image.\n"
"Takes values between [0 ... 255].\n"
"Decides the level of details to include\n"
"in the resulting geometry.\n"
"0 means no detail and 255 means everything \n"
"(which is totally black)."

#: AppTools/ToolImage.py:109
msgid ""
"Mask for RED color.\n"
"Takes values between [0 ... 255].\n"
"Decides the level of details to include\n"
"in the resulting geometry."
msgstr ""
"Mask for RED color.\n"
"Takes values between [0 ... 255].\n"
"Decides the level of details to include\n"
"in the resulting geometry."

#: AppTools/ToolImage.py:122
msgid ""
"Mask for GREEN color.\n"
"Takes values between [0 ... 255].\n"
"Decides the level of details to include\n"
"in the resulting geometry."
msgstr ""
"Mask for GREEN color.\n"
"Takes values between [0 ... 255].\n"
"Decides the level of details to include\n"
"in the resulting geometry."

#: AppTools/ToolImage.py:135
msgid ""
"Mask for BLUE color.\n"
"Takes values between [0 ... 255].\n"
"Decides the level of details to include\n"
"in the resulting geometry."
msgstr ""
"Mask for BLUE color.\n"
"Takes values between [0 ... 255].\n"
"Decides the level of details to include\n"
"in the resulting geometry."

#: AppTools/ToolImage.py:143
msgid "Import image"
msgstr "Import image"

#: AppTools/ToolImage.py:145
msgid "Open a image of raster type and then import it in FlatCAM."
msgstr "Open a image of raster type and then import it in FlatCAM."

#: AppTools/ToolImage.py:182
msgid "Image Tool"
msgstr "Image Tool"

#: AppTools/ToolImage.py:234 AppTools/ToolImage.py:237
msgid "Import IMAGE"
msgstr "Import IMAGE"

#: AppTools/ToolImage.py:277 App_Main.py:8514 App_Main.py:8561
msgid ""
"Not supported type is picked as parameter. Only Geometry and Gerber are "
"supported"
msgstr ""
"Not supported type is picked as parameter. Only Geometry and Gerber are "
"supported"

#: AppTools/ToolImage.py:285
msgid "Importing Image"
msgstr "Importing Image"

#: AppTools/ToolImage.py:297 AppTools/ToolPDF.py:154 App_Main.py:8539
#: App_Main.py:8585 App_Main.py:8649 App_Main.py:8716 App_Main.py:8782
#: App_Main.py:8847 App_Main.py:8904
msgid "Opened"
msgstr "Opened"

#: AppTools/ToolInvertGerber.py:74
msgid "Gerber object that will be inverted."
msgstr "Gerber object that will be inverted."

#: AppTools/ToolInvertGerber.py:83
msgid "Parameters for this tool"
msgstr "Parameters for this tool"

#: AppTools/ToolInvertGerber.py:123
msgid "Invert Gerber"
msgstr "Invert Gerber"

#: AppTools/ToolInvertGerber.py:125
msgid ""
"Will invert the Gerber object: areas that have copper\n"
"will be empty of copper and previous empty area will be\n"
"filled with copper."
msgstr ""
"Will invert the Gerber object: areas that have copper\n"
"will be empty of copper and previous empty area will be\n"
"filled with copper."

#: AppTools/ToolInvertGerber.py:184
msgid "Invert Tool"
msgstr "Invert Tool"

#: AppTools/ToolMove.py:102
msgid "MOVE: Click on the Start point ..."
msgstr "MOVE: Click on the Start point ..."

#: AppTools/ToolMove.py:113
msgid "Cancelled. No object(s) to move."
msgstr "Cancelled. No object(s) to move."

#: AppTools/ToolMove.py:140
msgid "MOVE: Click on the Destination point ..."
msgstr "MOVE: Click on the Destination point ..."

#: AppTools/ToolMove.py:163
msgid "Moving..."
msgstr "Moving..."

#: AppTools/ToolMove.py:166
msgid "No object(s) selected."
msgstr "No object(s) selected."

#: AppTools/ToolMove.py:221
msgid "Error when mouse left click."
msgstr "Error when mouse left click."

#: AppTools/ToolNCC.py:42
msgid "Non-Copper Clearing"
msgstr "Non-Copper Clearing"

#: AppTools/ToolNCC.py:88
msgid ""
"Specify the type of object to be cleared of excess copper.\n"
"It can be of type: Gerber or Geometry.\n"
"What is selected here will dictate the kind\n"
"of objects that will populate the 'Object' combobox."
msgstr ""
"Specify the type of object to be cleared of excess copper.\n"
"It can be of type: Gerber or Geometry.\n"
"What is selected here will dictate the kind\n"
"of objects that will populate the 'Object' combobox."

#: AppTools/ToolNCC.py:110
msgid "Object to be cleared of excess copper."
msgstr "Object to be cleared of excess copper."

#: AppTools/ToolNCC.py:122
msgid ""
"Tools pool from which the algorithm\n"
"will pick the ones used for copper clearing."
msgstr ""
"Tools pool from which the algorithm\n"
"will pick the ones used for copper clearing."

#: AppTools/ToolNCC.py:138
msgid ""
"This is the Tool Number.\n"
"Non copper clearing will start with the tool with the biggest \n"
"diameter, continuing until there are no more tools.\n"
"Only tools that create NCC clearing geometry will still be present\n"
"in the resulting geometry. This is because with some tools\n"
"this function will not be able to create painting geometry."
msgstr ""
"This is the Tool Number.\n"
"Non copper clearing will start with the tool with the biggest \n"
"diameter, continuing until there are no more tools.\n"
"Only tools that create NCC clearing geometry will still be present\n"
"in the resulting geometry. This is because with some tools\n"
"this function will not be able to create painting geometry."

#: AppTools/ToolNCC.py:146
msgid ""
"Tool Diameter. It's value (in current FlatCAM units)\n"
"is the cut width into the material."
msgstr ""
"Tool Diameter. It's value (in current FlatCAM units)\n"
"is the cut width into the material."

#: AppTools/ToolNCC.py:150
msgid ""
"The Tool Type (TT) can be:\n"
"- Circular with 1 ... 4 teeth -> it is informative only. Being circular,\n"
"the cut width in material is exactly the tool diameter.\n"
"- Ball -> informative only and make reference to the Ball type endmill.\n"
"- V-Shape -> it will disable Z-Cut parameter in the resulting geometry UI "
"form\n"
"and enable two additional UI form fields in the resulting geometry: V-Tip "
"Dia and\n"
"V-Tip Angle. Adjusting those two values will adjust the Z-Cut parameter "
"such\n"
"as the cut width into material will be equal with the value in the Tool "
"Diameter\n"
"column of this table.\n"
"Choosing the 'V-Shape' Tool Type automatically will select the Operation "
"Type\n"
"in the resulting geometry as Isolation."
msgstr ""
"The Tool Type (TT) can be:\n"
"- Circular with 1 ... 4 teeth -> it is informative only. Being circular,\n"
"the cut width in material is exactly the tool diameter.\n"
"- Ball -> informative only and make reference to the Ball type endmill.\n"
"- V-Shape -> it will disable Z-Cut parameter in the resulting geometry UI "
"form\n"
"and enable two additional UI form fields in the resulting geometry: V-Tip "
"Dia and\n"
"V-Tip Angle. Adjusting those two values will adjust the Z-Cut parameter "
"such\n"
"as the cut width into material will be equal with the value in the Tool "
"Diameter\n"
"column of this table.\n"
"Choosing the 'V-Shape' Tool Type automatically will select the Operation "
"Type\n"
"in the resulting geometry as Isolation."

#: AppTools/ToolNCC.py:296 AppTools/ToolPaint.py:278
msgid ""
"Add a new tool to the Tool Table\n"
"with the diameter specified above."
msgstr ""
"Add a new tool to the Tool Table\n"
"with the diameter specified above."

#: AppTools/ToolNCC.py:318 AppTools/ToolPaint.py:300
#: AppTools/ToolSolderPaste.py:130
msgid ""
"Delete a selection of tools in the Tool Table\n"
"by first selecting a row(s) in the Tool Table."
msgstr ""
"Delete a selection of tools in the Tool Table\n"
"by first selecting a row(s) in the Tool Table."

#: AppTools/ToolNCC.py:554
msgid ""
"The type of FlatCAM object to be used as non copper clearing reference.\n"
"It can be Gerber, Excellon or Geometry."
msgstr ""
"The type of FlatCAM object to be used as non copper clearing reference.\n"
"It can be Gerber, Excellon or Geometry."

#: AppTools/ToolNCC.py:597 AppTools/ToolPaint.py:536
msgid "Generate Geometry"
msgstr "Generate Geometry"

#: AppTools/ToolNCC.py:932 AppTools/ToolNCC.py:1431 AppTools/ToolPaint.py:857
#: AppTools/ToolSolderPaste.py:568 AppTools/ToolSolderPaste.py:893
#: App_Main.py:4440
msgid "Please enter a tool diameter with non-zero value, in Float format."
msgstr "Please enter a tool diameter with non-zero value, in Float format."

#: AppTools/ToolNCC.py:936 AppTools/ToolPaint.py:861
#: AppTools/ToolSolderPaste.py:572 App_Main.py:4444
msgid "Adding Tool cancelled"
msgstr "Adding Tool cancelled"

#: AppTools/ToolNCC.py:1425 AppTools/ToolPaint.py:1183
#: AppTools/ToolSolderPaste.py:888
msgid "Please enter a tool diameter to add, in Float format."
msgstr "Please enter a tool diameter to add, in Float format."

#: AppTools/ToolNCC.py:1456 AppTools/ToolNCC.py:4065 AppTools/ToolPaint.py:1207
#: AppTools/ToolPaint.py:3608 AppTools/ToolSolderPaste.py:917
msgid "Cancelled. Tool already in Tool Table."
msgstr "Cancelled. Tool already in Tool Table."

#: AppTools/ToolNCC.py:1463 AppTools/ToolNCC.py:4082 AppTools/ToolPaint.py:1212
#: AppTools/ToolPaint.py:3625
msgid "New tool added to Tool Table."
msgstr "New tool added to Tool Table."

#: AppTools/ToolNCC.py:1507 AppTools/ToolPaint.py:1256
msgid "Tool from Tool Table was edited."
msgstr "Tool from Tool Table was edited."

#: AppTools/ToolNCC.py:1519 AppTools/ToolPaint.py:1268
#: AppTools/ToolSolderPaste.py:978
msgid "Cancelled. New diameter value is already in the Tool Table."
msgstr "Cancelled. New diameter value is already in the Tool Table."

#: AppTools/ToolNCC.py:1571 AppTools/ToolPaint.py:1366
msgid "Delete failed. Select a tool to delete."
msgstr "Delete failed. Select a tool to delete."

#: AppTools/ToolNCC.py:1577 AppTools/ToolPaint.py:1372
msgid "Tool(s) deleted from Tool Table."
msgstr "Tool(s) deleted from Tool Table."

#: AppTools/ToolNCC.py:1620
msgid "Wrong Tool Dia value format entered, use a number."
msgstr "Wrong Tool Dia value format entered, use a number."

#: AppTools/ToolNCC.py:1629 AppTools/ToolPaint.py:1423
msgid "No selected tools in Tool Table."
msgstr "No selected tools in Tool Table."

#: AppTools/ToolNCC.py:1705 AppTools/ToolPaint.py:1599
msgid "Click the end point of the paint area."
msgstr "Click the end point of the paint area."

#: AppTools/ToolNCC.py:1985 AppTools/ToolNCC.py:3010
msgid "NCC Tool. Preparing non-copper polygons."
msgstr "NCC Tool. Preparing non-copper polygons."

#: AppTools/ToolNCC.py:2044 AppTools/ToolNCC.py:3138
msgid "NCC Tool. Calculate 'empty' area."
msgstr "NCC Tool. Calculate 'empty' area."

#: AppTools/ToolNCC.py:2063 AppTools/ToolNCC.py:2172 AppTools/ToolNCC.py:2187
#: AppTools/ToolNCC.py:3151 AppTools/ToolNCC.py:3256 AppTools/ToolNCC.py:3271
#: AppTools/ToolNCC.py:3537 AppTools/ToolNCC.py:3638 AppTools/ToolNCC.py:3653
msgid "Buffering finished"
msgstr "Buffering finished"

#: AppTools/ToolNCC.py:2071 AppTools/ToolNCC.py:2194 AppTools/ToolNCC.py:3159
#: AppTools/ToolNCC.py:3278 AppTools/ToolNCC.py:3544 AppTools/ToolNCC.py:3660
msgid "Could not get the extent of the area to be non copper cleared."
msgstr "Could not get the extent of the area to be non copper cleared."

#: AppTools/ToolNCC.py:2101 AppTools/ToolNCC.py:2180 AppTools/ToolNCC.py:3186
#: AppTools/ToolNCC.py:3263 AppTools/ToolNCC.py:3564 AppTools/ToolNCC.py:3645
msgid ""
"Isolation geometry is broken. Margin is less than isolation tool diameter."
msgstr ""
"Isolation geometry is broken. Margin is less than isolation tool diameter."

#: AppTools/ToolNCC.py:2197 AppTools/ToolNCC.py:3282 AppTools/ToolNCC.py:3663
msgid "The selected object is not suitable for copper clearing."
msgstr "The selected object is not suitable for copper clearing."

#: AppTools/ToolNCC.py:2204 AppTools/ToolNCC.py:3289
msgid "NCC Tool. Finished calculation of 'empty' area."
msgstr "NCC Tool. Finished calculation of 'empty' area."

#: AppTools/ToolNCC.py:2247
#| msgid "Painting polygon with method: lines."
msgid "Clearing polygon with method: lines."
msgstr "Clearing polygon with method: lines."

#: AppTools/ToolNCC.py:2257
#| msgid "Failed. Painting polygon with method: seed."
msgid "Failed. Clearing polygon with method: seed."
msgstr "Failed. Clearing polygon with method: seed."

#: AppTools/ToolNCC.py:2266
#| msgid "Failed. Painting polygon with method: standard."
msgid "Failed. Clearing polygon with method: standard."
msgstr "Failed. Clearing polygon with method: standard."

#: AppTools/ToolNCC.py:2280
#| msgid "Geometry could not be painted completely"
msgid "Geometry could not be cleared completely"
msgstr "Geometry could not be cleared completely"

#: AppTools/ToolNCC.py:2305 AppTools/ToolNCC.py:2307 AppTools/ToolNCC.py:2962
#: AppTools/ToolNCC.py:2964
msgid "Non-Copper clearing ..."
msgstr "Non-Copper clearing ..."

#: AppTools/ToolNCC.py:2354 AppTools/ToolNCC.py:3106
msgid ""
"NCC Tool. Finished non-copper polygons. Normal copper clearing task started."
msgstr ""
"NCC Tool. Finished non-copper polygons. Normal copper clearing task started."

#: AppTools/ToolNCC.py:2390 AppTools/ToolNCC.py:2638
msgid "NCC Tool failed creating bounding box."
msgstr "NCC Tool failed creating bounding box."

#: AppTools/ToolNCC.py:2405 AppTools/ToolNCC.py:2655 AppTools/ToolNCC.py:3302
#: AppTools/ToolNCC.py:3688
msgid "NCC Tool clearing with tool diameter"
msgstr "NCC Tool clearing with tool diameter"

#: AppTools/ToolNCC.py:2405 AppTools/ToolNCC.py:2655 AppTools/ToolNCC.py:3302
#: AppTools/ToolNCC.py:3688
msgid "started."
msgstr "started."

#: AppTools/ToolNCC.py:2563 AppTools/ToolNCC.py:3463
msgid ""
"There is no NCC Geometry in the file.\n"
"Usually it means that the tool diameter is too big for the painted "
"geometry.\n"
"Change the painting parameters and try again."
msgstr ""
"There is no NCC Geometry in the file.\n"
"Usually it means that the tool diameter is too big for the painted "
"geometry.\n"
"Change the painting parameters and try again."

#: AppTools/ToolNCC.py:2572 AppTools/ToolNCC.py:3472
msgid "NCC Tool clear all done."
msgstr "NCC Tool clear all done."

#: AppTools/ToolNCC.py:2575 AppTools/ToolNCC.py:3475
msgid "NCC Tool clear all done but the copper features isolation is broken for"
msgstr ""
"NCC Tool clear all done but the copper features isolation is broken for"

#: AppTools/ToolNCC.py:2577 AppTools/ToolNCC.py:2863 AppTools/ToolNCC.py:3477
#: AppTools/ToolNCC.py:3860
msgid "tools"
msgstr "tools"

#: AppTools/ToolNCC.py:2859 AppTools/ToolNCC.py:3856
msgid "NCC Tool Rest Machining clear all done."
msgstr "NCC Tool Rest Machining clear all done."

#: AppTools/ToolNCC.py:2862 AppTools/ToolNCC.py:3859
msgid ""
"NCC Tool Rest Machining clear all done but the copper features isolation is "
"broken for"
msgstr ""
"NCC Tool Rest Machining clear all done but the copper features isolation is "
"broken for"

#: AppTools/ToolNCC.py:2974
msgid "NCC Tool started. Reading parameters."
msgstr "NCC Tool started. Reading parameters."

#: AppTools/ToolNCC.py:3958
msgid ""
"Try to use the Buffering Type = Full in Preferences -> Gerber General. "
"Reload the Gerber file after this change."
msgstr ""
"Try to use the Buffering Type = Full in Preferences -> Gerber General. "
"Reload the Gerber file after this change."

#: AppTools/ToolNCC.py:4022 AppTools/ToolPaint.py:3565 App_Main.py:5501
msgid "Tool from DB added in Tool Table."
msgstr "Tool from DB added in Tool Table."

#: AppTools/ToolOptimal.py:79
msgid "Number of decimals kept for found distances."
msgstr "Number of decimals kept for found distances."

#: AppTools/ToolOptimal.py:87
msgid "Minimum distance"
msgstr "Minimum distance"

#: AppTools/ToolOptimal.py:88
msgid "Display minimum distance between copper features."
msgstr "Display minimum distance between copper features."

#: AppTools/ToolOptimal.py:92
msgid "Determined"
msgstr "Determined"

#: AppTools/ToolOptimal.py:106
msgid "Occurring"
msgstr "Occurring"

#: AppTools/ToolOptimal.py:107
msgid "How many times this minimum is found."
msgstr "How many times this minimum is found."

#: AppTools/ToolOptimal.py:113
msgid "Minimum points coordinates"
msgstr "Minimum points coordinates"

#: AppTools/ToolOptimal.py:114 AppTools/ToolOptimal.py:120
msgid "Coordinates for points where minimum distance was found."
msgstr "Coordinates for points where minimum distance was found."

#: AppTools/ToolOptimal.py:133 AppTools/ToolOptimal.py:209
msgid "Jump to selected position"
msgstr "Jump to selected position"

#: AppTools/ToolOptimal.py:135 AppTools/ToolOptimal.py:211
msgid ""
"Select a position in the Locations text box and then\n"
"click this button."
msgstr ""
"Select a position in the Locations text box and then\n"
"click this button."

#: AppTools/ToolOptimal.py:143
msgid "Other distances"
msgstr "Other distances"

#: AppTools/ToolOptimal.py:144
msgid ""
"Will display other distances in the Gerber file ordered from\n"
"the minimum to the maximum, not including the absolute minimum."
msgstr ""
"Will display other distances in the Gerber file ordered from\n"
"the minimum to the maximum, not including the absolute minimum."

#: AppTools/ToolOptimal.py:149
msgid "Other distances points coordinates"
msgstr "Other distances points coordinates"

#: AppTools/ToolOptimal.py:150 AppTools/ToolOptimal.py:164
#: AppTools/ToolOptimal.py:171 AppTools/ToolOptimal.py:188
#: AppTools/ToolOptimal.py:195
msgid ""
"Other distances and the coordinates for points\n"
"where the distance was found."
msgstr ""
"Other distances and the coordinates for points\n"
"where the distance was found."

#: AppTools/ToolOptimal.py:163
msgid "Gerber distances"
msgstr "Gerber distances"

#: AppTools/ToolOptimal.py:187
msgid "Points coordinates"
msgstr "Points coordinates"

#: AppTools/ToolOptimal.py:219
msgid "Find Minimum"
msgstr "Find Minimum"

#: AppTools/ToolOptimal.py:221
msgid ""
"Calculate the minimum distance between copper features,\n"
"this will allow the determination of the right tool to\n"
"use for isolation or copper clearing."
msgstr ""
"Calculate the minimum distance between copper features,\n"
"this will allow the determination of the right tool to\n"
"use for isolation or copper clearing."

#: AppTools/ToolOptimal.py:346
msgid "Only Gerber objects can be evaluated."
msgstr "Only Gerber objects can be evaluated."

#: AppTools/ToolOptimal.py:352
msgid ""
"Optimal Tool. Started to search for the minimum distance between copper "
"features."
msgstr ""
"Optimal Tool. Started to search for the minimum distance between copper "
"features."

#: AppTools/ToolOptimal.py:362
msgid "Optimal Tool. Parsing geometry for aperture"
msgstr "Optimal Tool. Parsing geometry for aperture"

#: AppTools/ToolOptimal.py:373
msgid "Optimal Tool. Creating a buffer for the object geometry."
msgstr "Optimal Tool. Creating a buffer for the object geometry."

#: AppTools/ToolOptimal.py:383
msgid ""
"The Gerber object has one Polygon as geometry.\n"
"There are no distances between geometry elements to be found."
msgstr ""
"The Gerber object has one Polygon as geometry.\n"
"There are no distances between geometry elements to be found."

#: AppTools/ToolOptimal.py:388
msgid ""
"Optimal Tool. Finding the distances between each two elements. Iterations"
msgstr ""
"Optimal Tool. Finding the distances between each two elements. Iterations"

#: AppTools/ToolOptimal.py:423
msgid "Optimal Tool. Finding the minimum distance."
msgstr "Optimal Tool. Finding the minimum distance."

#: AppTools/ToolOptimal.py:439
msgid "Optimal Tool. Finished successfully."
msgstr "Optimal Tool. Finished successfully."

#: AppTools/ToolPDF.py:91 AppTools/ToolPDF.py:95
msgid "Open PDF"
msgstr "Open PDF"

#: AppTools/ToolPDF.py:98
msgid "Open PDF cancelled"
msgstr "Open PDF cancelled"

#: AppTools/ToolPDF.py:122
msgid "Parsing PDF file ..."
msgstr "Parsing PDF file ..."

#: AppTools/ToolPDF.py:138 App_Main.py:8747
msgid "Failed to open"
msgstr "Failed to open"

#: AppTools/ToolPDF.py:203 AppTools/ToolPcbWizard.py:445 App_Main.py:8696
msgid "No geometry found in file"
msgstr "No geometry found in file"

#: AppTools/ToolPDF.py:206 AppTools/ToolPDF.py:279
#, python-format
msgid "Rendering PDF layer #%d ..."
msgstr "Rendering PDF layer #%d ..."

#: AppTools/ToolPDF.py:210 AppTools/ToolPDF.py:283
msgid "Open PDF file failed."
msgstr "Open PDF file failed."

#: AppTools/ToolPDF.py:215 AppTools/ToolPDF.py:288
msgid "Rendered"
msgstr "Rendered"

#: AppTools/ToolPaint.py:81
msgid ""
"Specify the type of object to be painted.\n"
"It can be of type: Gerber or Geometry.\n"
"What is selected here will dictate the kind\n"
"of objects that will populate the 'Object' combobox."
msgstr ""
"Specify the type of object to be painted.\n"
"It can be of type: Gerber or Geometry.\n"
"What is selected here will dictate the kind\n"
"of objects that will populate the 'Object' combobox."

#: AppTools/ToolPaint.py:103
msgid "Object to be painted."
msgstr "Object to be painted."

#: AppTools/ToolPaint.py:116
msgid ""
"Tools pool from which the algorithm\n"
"will pick the ones used for painting."
msgstr ""
"Tools pool from which the algorithm\n"
"will pick the ones used for painting."

#: AppTools/ToolPaint.py:133
msgid ""
"This is the Tool Number.\n"
"Painting will start with the tool with the biggest diameter,\n"
"continuing until there are no more tools.\n"
"Only tools that create painting geometry will still be present\n"
"in the resulting geometry. This is because with some tools\n"
"this function will not be able to create painting geometry."
msgstr ""
"This is the Tool Number.\n"
"Painting will start with the tool with the biggest diameter,\n"
"continuing until there are no more tools.\n"
"Only tools that create painting geometry will still be present\n"
"in the resulting geometry. This is because with some tools\n"
"this function will not be able to create painting geometry."

#: AppTools/ToolPaint.py:145
msgid ""
"The Tool Type (TT) can be:\n"
"- Circular -> it is informative only. Being circular,\n"
"the cut width in material is exactly the tool diameter.\n"
"- Ball -> informative only and make reference to the Ball type endmill.\n"
"- V-Shape -> it will disable Z-Cut parameter in the resulting geometry UI "
"form\n"
"and enable two additional UI form fields in the resulting geometry: V-Tip "
"Dia and\n"
"V-Tip Angle. Adjusting those two values will adjust the Z-Cut parameter "
"such\n"
"as the cut width into material will be equal with the value in the Tool "
"Diameter\n"
"column of this table.\n"
"Choosing the 'V-Shape' Tool Type automatically will select the Operation "
"Type\n"
"in the resulting geometry as Isolation."
msgstr ""
"The Tool Type (TT) can be:\n"
"- Circular -> it is informative only. Being circular,\n"
"the cut width in material is exactly the tool diameter.\n"
"- Ball -> informative only and make reference to the Ball type endmill.\n"
"- V-Shape -> it will disable Z-Cut parameter in the resulting geometry UI "
"form\n"
"and enable two additional UI form fields in the resulting geometry: V-Tip "
"Dia and\n"
"V-Tip Angle. Adjusting those two values will adjust the Z-Cut parameter "
"such\n"
"as the cut width into material will be equal with the value in the Tool "
"Diameter\n"
"column of this table.\n"
"Choosing the 'V-Shape' Tool Type automatically will select the Operation "
"Type\n"
"in the resulting geometry as Isolation."

#: AppTools/ToolPaint.py:497
msgid ""
"The type of FlatCAM object to be used as paint reference.\n"
"It can be Gerber, Excellon or Geometry."
msgstr ""
"The type of FlatCAM object to be used as paint reference.\n"
"It can be Gerber, Excellon or Geometry."

#: AppTools/ToolPaint.py:538
msgid ""
"- 'Area Selection' - left mouse click to start selection of the area to be "
"painted.\n"
"Keeping a modifier key pressed (CTRL or SHIFT) will allow to add multiple "
"areas.\n"
"- 'All Polygons' - the Paint will start after click.\n"
"- 'Reference Object' -  will do non copper clearing within the area\n"
"specified by another object."
msgstr ""
"- 'Area Selection' - left mouse click to start selection of the area to be "
"painted.\n"
"Keeping a modifier key pressed (CTRL or SHIFT) will allow to add multiple "
"areas.\n"
"- 'All Polygons' - the Paint will start after click.\n"
"- 'Reference Object' -  will do non copper clearing within the area\n"
"specified by another object."

#: AppTools/ToolPaint.py:1392
#, python-format
msgid "Could not retrieve object: %s"
msgstr "Could not retrieve object: %s"

#: AppTools/ToolPaint.py:1402
msgid "Can't do Paint on MultiGeo geometries"
msgstr "Can't do Paint on MultiGeo geometries"

#: AppTools/ToolPaint.py:1432
msgid "Click on a polygon to paint it."
msgstr "Click on a polygon to paint it."

#: AppTools/ToolPaint.py:1452
msgid "Click the start point of the paint area."
msgstr "Click the start point of the paint area."

#: AppTools/ToolPaint.py:1517
msgid "Click to add next polygon or right click to start painting."
msgstr "Click to add next polygon or right click to start painting."

#: AppTools/ToolPaint.py:1530
msgid "Click to add/remove next polygon or right click to start painting."
msgstr "Click to add/remove next polygon or right click to start painting."

#: AppTools/ToolPaint.py:2034
msgid "Painting polygon with method: lines."
msgstr "Painting polygon with method: lines."

#: AppTools/ToolPaint.py:2046
msgid "Failed. Painting polygon with method: seed."
msgstr "Failed. Painting polygon with method: seed."

#: AppTools/ToolPaint.py:2057
msgid "Failed. Painting polygon with method: standard."
msgstr "Failed. Painting polygon with method: standard."

#: AppTools/ToolPaint.py:2073
msgid "Geometry could not be painted completely"
msgstr "Geometry could not be painted completely"

#: AppTools/ToolPaint.py:2102 AppTools/ToolPaint.py:2105
#: AppTools/ToolPaint.py:2113 AppTools/ToolPaint.py:2416
#: AppTools/ToolPaint.py:2419 AppTools/ToolPaint.py:2427
#: AppTools/ToolPaint.py:2915 AppTools/ToolPaint.py:2918
#: AppTools/ToolPaint.py:2924
msgid "Paint Tool."
msgstr "Paint Tool."

#: AppTools/ToolPaint.py:2102 AppTools/ToolPaint.py:2105
#: AppTools/ToolPaint.py:2113
msgid "Normal painting polygon task started."
msgstr "Normal painting polygon task started."

#: AppTools/ToolPaint.py:2103 AppTools/ToolPaint.py:2417
#: AppTools/ToolPaint.py:2916
msgid "Buffering geometry..."
msgstr "Buffering geometry..."

#: AppTools/ToolPaint.py:2125 AppTools/ToolPaint.py:2434
#: AppTools/ToolPaint.py:2932
msgid "No polygon found."
msgstr "No polygon found."

#: AppTools/ToolPaint.py:2155
msgid "Painting polygon..."
msgstr "Painting polygon..."

#: AppTools/ToolPaint.py:2165 AppTools/ToolPaint.py:2480
#: AppTools/ToolPaint.py:2670 AppTools/ToolPaint.py:2978
#: AppTools/ToolPaint.py:3157
msgid "Painting with tool diameter = "
msgstr "Painting with tool diameter = "

#: AppTools/ToolPaint.py:2166 AppTools/ToolPaint.py:2481
#: AppTools/ToolPaint.py:2671 AppTools/ToolPaint.py:2979
#: AppTools/ToolPaint.py:3158
msgid "started"
msgstr "started"

#: AppTools/ToolPaint.py:2191 AppTools/ToolPaint.py:2507
#: AppTools/ToolPaint.py:2697 AppTools/ToolPaint.py:3005
#: AppTools/ToolPaint.py:3184
msgid "Margin parameter too big. Tool is not used"
msgstr "Margin parameter too big. Tool is not used"

#: AppTools/ToolPaint.py:2249 AppTools/ToolPaint.py:2576
#: AppTools/ToolPaint.py:2754 AppTools/ToolPaint.py:3068
#: AppTools/ToolPaint.py:3246
msgid ""
"Could not do Paint. Try a different combination of parameters. Or a "
"different strategy of paint"
msgstr ""
"Could not do Paint. Try a different combination of parameters. Or a "
"different strategy of paint"

#: AppTools/ToolPaint.py:2306 AppTools/ToolPaint.py:2642
#: AppTools/ToolPaint.py:2811 AppTools/ToolPaint.py:3129
#: AppTools/ToolPaint.py:3308
msgid ""
"There is no Painting Geometry in the file.\n"
"Usually it means that the tool diameter is too big for the painted "
"geometry.\n"
"Change the painting parameters and try again."
msgstr ""
"There is no Painting Geometry in the file.\n"
"Usually it means that the tool diameter is too big for the painted "
"geometry.\n"
"Change the painting parameters and try again."

#: AppTools/ToolPaint.py:2329
msgid "Paint Single failed."
msgstr "Paint Single failed."

#: AppTools/ToolPaint.py:2335
msgid "Paint Single Done."
msgstr "Paint Single Done."

#: AppTools/ToolPaint.py:2337 AppTools/ToolPaint.py:2847
#: AppTools/ToolPaint.py:3344
msgid "Polygon Paint started ..."
msgstr "Polygon Paint started ..."

#: AppTools/ToolPaint.py:2416 AppTools/ToolPaint.py:2419
#: AppTools/ToolPaint.py:2427
msgid "Paint all polygons task started."
msgstr "Paint all polygons task started."

#: AppTools/ToolPaint.py:2458 AppTools/ToolPaint.py:2956
msgid "Painting polygons..."
msgstr "Painting polygons..."

#: AppTools/ToolPaint.py:2651
msgid "Paint All Done."
msgstr "Paint All Done."

#: AppTools/ToolPaint.py:2820 AppTools/ToolPaint.py:3317
msgid "Paint All with Rest-Machining done."
msgstr "Paint All with Rest-Machining done."

#: AppTools/ToolPaint.py:2839
msgid "Paint All failed."
msgstr "Paint All failed."

#: AppTools/ToolPaint.py:2845
msgid "Paint Poly All Done."
msgstr "Paint Poly All Done."

#: AppTools/ToolPaint.py:2915 AppTools/ToolPaint.py:2918
#: AppTools/ToolPaint.py:2924
msgid "Painting area task started."
msgstr "Painting area task started."

#: AppTools/ToolPaint.py:3138
msgid "Paint Area Done."
msgstr "Paint Area Done."

#: AppTools/ToolPaint.py:3336
msgid "Paint Area failed."
msgstr "Paint Area failed."

#: AppTools/ToolPaint.py:3342
msgid "Paint Poly Area Done."
msgstr "Paint Poly Area Done."

#: AppTools/ToolPanelize.py:35
msgid "Panelize PCB"
msgstr "Panelize PCB"

#: AppTools/ToolPanelize.py:55
msgid ""
"Specify the type of object to be panelized\n"
"It can be of type: Gerber, Excellon or Geometry.\n"
"The selection here decide the type of objects that will be\n"
"in the Object combobox."
msgstr ""
"Specify the type of object to be panelized\n"
"It can be of type: Gerber, Excellon or Geometry.\n"
"The selection here decide the type of objects that will be\n"
"in the Object combobox."

#: AppTools/ToolPanelize.py:88
msgid ""
"Object to be panelized. This means that it will\n"
"be duplicated in an array of rows and columns."
msgstr ""
"Object to be panelized. This means that it will\n"
"be duplicated in an array of rows and columns."

#: AppTools/ToolPanelize.py:100
msgid "Penelization Reference"
msgstr "Penelization Reference"

#: AppTools/ToolPanelize.py:102
msgid ""
"Choose the reference for panelization:\n"
"- Object = the bounding box of a different object\n"
"- Bounding Box = the bounding box of the object to be panelized\n"
"\n"
"The reference is useful when doing panelization for more than one\n"
"object. The spacings (really offsets) will be applied in reference\n"
"to this reference object therefore maintaining the panelized\n"
"objects in sync."
msgstr ""
"Choose the reference for panelization:\n"
"- Object = the bounding box of a different object\n"
"- Bounding Box = the bounding box of the object to be panelized\n"
"\n"
"The reference is useful when doing panelization for more than one\n"
"object. The spacings (really offsets) will be applied in reference\n"
"to this reference object therefore maintaining the panelized\n"
"objects in sync."

#: AppTools/ToolPanelize.py:123
msgid "Box Type"
msgstr "Box Type"

#: AppTools/ToolPanelize.py:125
msgid ""
"Specify the type of object to be used as an container for\n"
"panelization. It can be: Gerber or Geometry type.\n"
"The selection here decide the type of objects that will be\n"
"in the Box Object combobox."
msgstr ""
"Specify the type of object to be used as an container for\n"
"panelization. It can be: Gerber or Geometry type.\n"
"The selection here decide the type of objects that will be\n"
"in the Box Object combobox."

#: AppTools/ToolPanelize.py:139
msgid ""
"The actual object that is used as container for the\n"
" selected object that is to be panelized."
msgstr ""
"The actual object that is used as container for the\n"
" selected object that is to be panelized."

#: AppTools/ToolPanelize.py:149
msgid "Panel Data"
msgstr "Panel Data"

#: AppTools/ToolPanelize.py:151
msgid ""
"This informations will shape the resulting panel.\n"
"The number of rows and columns will set how many\n"
"duplicates of the original geometry will be generated.\n"
"\n"
"The spacings will set the distance between any two\n"
"elements of the panel array."
msgstr ""
"This informations will shape the resulting panel.\n"
"The number of rows and columns will set how many\n"
"duplicates of the original geometry will be generated.\n"
"\n"
"The spacings will set the distance between any two\n"
"elements of the panel array."

#: AppTools/ToolPanelize.py:214
msgid ""
"Choose the type of object for the panel object:\n"
"- Geometry\n"
"- Gerber"
msgstr ""
"Choose the type of object for the panel object:\n"
"- Geometry\n"
"- Gerber"

#: AppTools/ToolPanelize.py:222
msgid "Constrain panel within"
msgstr "Constrain panel within"

#: AppTools/ToolPanelize.py:263
msgid "Panelize Object"
msgstr "Panelize Object"

#: AppTools/ToolPanelize.py:265 AppTools/ToolRulesCheck.py:501
msgid ""
"Panelize the specified object around the specified box.\n"
"In other words it creates multiple copies of the source object,\n"
"arranged in a 2D array of rows and columns."
msgstr ""
"Panelize the specified object around the specified box.\n"
"In other words it creates multiple copies of the source object,\n"
"arranged in a 2D array of rows and columns."

#: AppTools/ToolPanelize.py:333
msgid "Panel. Tool"
msgstr "Panel. Tool"

#: AppTools/ToolPanelize.py:468
msgid "Columns or Rows are zero value. Change them to a positive integer."
msgstr "Columns or Rows are zero value. Change them to a positive integer."

#: AppTools/ToolPanelize.py:505
msgid "Generating panel ... "
msgstr "Generating panel ... "

#: AppTools/ToolPanelize.py:788
msgid "Generating panel ... Adding the Gerber code."
msgstr "Generating panel ... Adding the Gerber code."

#: AppTools/ToolPanelize.py:796
msgid "Generating panel... Spawning copies"
msgstr "Generating panel... Spawning copies"

#: AppTools/ToolPanelize.py:803
msgid "Panel done..."
msgstr "Panel done..."

#: AppTools/ToolPanelize.py:806
#, python-brace-format
msgid ""
"{text} Too big for the constrain area. Final panel has {col} columns and "
"{row} rows"
msgstr ""
"{text} Too big for the constrain area. Final panel has {col} columns and "
"{row} rows"

#: AppTools/ToolPanelize.py:815
msgid "Panel created successfully."
msgstr "Panel created successfully."

#: AppTools/ToolPcbWizard.py:31
msgid "PcbWizard Import Tool"
msgstr "PcbWizard Import Tool"

#: AppTools/ToolPcbWizard.py:40
msgid "Import 2-file Excellon"
msgstr "Import 2-file Excellon"

#: AppTools/ToolPcbWizard.py:51
msgid "Load files"
msgstr "Load files"

#: AppTools/ToolPcbWizard.py:57
msgid "Excellon file"
msgstr "Excellon file"

#: AppTools/ToolPcbWizard.py:59
msgid ""
"Load the Excellon file.\n"
"Usually it has a .DRL extension"
msgstr ""
"Load the Excellon file.\n"
"Usually it has a .DRL extension"

#: AppTools/ToolPcbWizard.py:65
msgid "INF file"
msgstr "INF file"

#: AppTools/ToolPcbWizard.py:67
msgid "Load the INF file."
msgstr "Load the INF file."

#: AppTools/ToolPcbWizard.py:79
msgid "Tool Number"
msgstr "Tool Number"

#: AppTools/ToolPcbWizard.py:81
msgid "Tool diameter in file units."
msgstr "Tool diameter in file units."

#: AppTools/ToolPcbWizard.py:87
msgid "Excellon format"
msgstr "Excellon format"

#: AppTools/ToolPcbWizard.py:95
msgid "Int. digits"
msgstr "Int. digits"

#: AppTools/ToolPcbWizard.py:97
msgid "The number of digits for the integral part of the coordinates."
msgstr "The number of digits for the integral part of the coordinates."

#: AppTools/ToolPcbWizard.py:104
msgid "Frac. digits"
msgstr "Frac. digits"

#: AppTools/ToolPcbWizard.py:106
msgid "The number of digits for the fractional part of the coordinates."
msgstr "The number of digits for the fractional part of the coordinates."

#: AppTools/ToolPcbWizard.py:113
msgid "No Suppression"
msgstr "No Suppression"

#: AppTools/ToolPcbWizard.py:114
msgid "Zeros supp."
msgstr "Zeros supp."

#: AppTools/ToolPcbWizard.py:116
msgid ""
"The type of zeros suppression used.\n"
"Can be of type:\n"
"- LZ = leading zeros are kept\n"
"- TZ = trailing zeros are kept\n"
"- No Suppression = no zero suppression"
msgstr ""
"The type of zeros suppression used.\n"
"Can be of type:\n"
"- LZ = leading zeros are kept\n"
"- TZ = trailing zeros are kept\n"
"- No Suppression = no zero suppression"

#: AppTools/ToolPcbWizard.py:129
msgid ""
"The type of units that the coordinates and tool\n"
"diameters are using. Can be INCH or MM."
msgstr ""
"The type of units that the coordinates and tool\n"
"diameters are using. Can be INCH or MM."

#: AppTools/ToolPcbWizard.py:136
msgid "Import Excellon"
msgstr "Import Excellon"

#: AppTools/ToolPcbWizard.py:138
msgid ""
"Import in FlatCAM an Excellon file\n"
"that store it's information's in 2 files.\n"
"One usually has .DRL extension while\n"
"the other has .INF extension."
msgstr ""
"Import in FlatCAM an Excellon file\n"
"that store it's information's in 2 files.\n"
"One usually has .DRL extension while\n"
"the other has .INF extension."

#: AppTools/ToolPcbWizard.py:197
msgid "PCBWizard Tool"
msgstr "PCBWizard Tool"

#: AppTools/ToolPcbWizard.py:291 AppTools/ToolPcbWizard.py:295
msgid "Load PcbWizard Excellon file"
msgstr "Load PcbWizard Excellon file"

#: AppTools/ToolPcbWizard.py:314 AppTools/ToolPcbWizard.py:318
msgid "Load PcbWizard INF file"
msgstr "Load PcbWizard INF file"

#: AppTools/ToolPcbWizard.py:366
msgid ""
"The INF file does not contain the tool table.\n"
"Try to open the Excellon file from File -> Open -> Excellon\n"
"and edit the drill diameters manually."
msgstr ""
"The INF file does not contain the tool table.\n"
"Try to open the Excellon file from File -> Open -> Excellon\n"
"and edit the drill diameters manually."

#: AppTools/ToolPcbWizard.py:387
msgid "PcbWizard .INF file loaded."
msgstr "PcbWizard .INF file loaded."

#: AppTools/ToolPcbWizard.py:392
msgid "Main PcbWizard Excellon file loaded."
msgstr "Main PcbWizard Excellon file loaded."

#: AppTools/ToolPcbWizard.py:424 App_Main.py:8674
msgid "This is not Excellon file."
msgstr "This is not Excellon file."

#: AppTools/ToolPcbWizard.py:427
msgid "Cannot parse file"
msgstr "Cannot parse file"

#: AppTools/ToolPcbWizard.py:450
msgid "Importing Excellon."
msgstr "Importing Excellon."

#: AppTools/ToolPcbWizard.py:457
msgid "Import Excellon file failed."
msgstr "Import Excellon file failed."

#: AppTools/ToolPcbWizard.py:464
msgid "Imported"
msgstr "Imported"

#: AppTools/ToolPcbWizard.py:467
msgid "Excellon merging is in progress. Please wait..."
msgstr "Excellon merging is in progress. Please wait..."

#: AppTools/ToolPcbWizard.py:469
msgid "The imported Excellon file is empty."
msgstr "The imported Excellon file is empty."

#: AppTools/ToolProperties.py:116 App_Main.py:4914 App_Main.py:6968
#: App_Main.py:7063 App_Main.py:7104 App_Main.py:7145 App_Main.py:7186
#: App_Main.py:7227 App_Main.py:7271 App_Main.py:7315 App_Main.py:7835
#: App_Main.py:7839
msgid "No object selected."
msgstr "No object selected."

#: AppTools/ToolProperties.py:131
msgid "Object Properties are displayed."
msgstr "Object Properties are displayed."

#: AppTools/ToolProperties.py:136
msgid "Properties Tool"
msgstr "Properties Tool"

#: AppTools/ToolProperties.py:150
msgid "TYPE"
msgstr "TYPE"

#: AppTools/ToolProperties.py:151
msgid "NAME"
msgstr "NAME"

#: AppTools/ToolProperties.py:153
msgid "Dimensions"
msgstr "Dimensions"

#: AppTools/ToolProperties.py:181
msgid "Geo Type"
msgstr "Geo Type"

#: AppTools/ToolProperties.py:184
msgid "Single-Geo"
msgstr "Single-Geo"

#: AppTools/ToolProperties.py:185
msgid "Multi-Geo"
msgstr "Multi-Geo"

#: AppTools/ToolProperties.py:196
msgid "Calculating dimensions ... Please wait."
msgstr "Calculating dimensions ... Please wait."

#: AppTools/ToolProperties.py:339 AppTools/ToolProperties.py:343
#: AppTools/ToolProperties.py:345
msgid "Inch"
msgstr "Inch"

#: AppTools/ToolProperties.py:339 AppTools/ToolProperties.py:344
#: AppTools/ToolProperties.py:346
msgid "Metric"
msgstr "Metric"

#: AppTools/ToolProperties.py:421 AppTools/ToolProperties.py:486
msgid "Drills number"
msgstr "Drills number"

#: AppTools/ToolProperties.py:422 AppTools/ToolProperties.py:488
msgid "Slots number"
msgstr "Slots number"

#: AppTools/ToolProperties.py:424
msgid "Drills total number:"
msgstr "Drills total number:"

#: AppTools/ToolProperties.py:425
msgid "Slots total number:"
msgstr "Slots total number:"

#: AppTools/ToolProperties.py:452 AppTools/ToolProperties.py:455
#: AppTools/ToolProperties.py:458 AppTools/ToolProperties.py:483
msgid "Present"
msgstr "Present"

#: AppTools/ToolProperties.py:453 AppTools/ToolProperties.py:484
msgid "Solid Geometry"
msgstr "Solid Geometry"

#: AppTools/ToolProperties.py:456
msgid "GCode Text"
msgstr "GCode Text"

#: AppTools/ToolProperties.py:459
msgid "GCode Geometry"
msgstr "GCode Geometry"

#: AppTools/ToolProperties.py:462
msgid "Data"
msgstr "Data"

#: AppTools/ToolProperties.py:495
msgid "Depth of Cut"
msgstr "Depth of Cut"

#: AppTools/ToolProperties.py:507
msgid "Clearance Height"
msgstr "Clearance Height"

#: AppTools/ToolProperties.py:539
msgid "Routing time"
msgstr "Routing time"

#: AppTools/ToolProperties.py:546
msgid "Travelled distance"
msgstr "Travelled distance"

#: AppTools/ToolProperties.py:564
msgid "Width"
msgstr "Width"

#: AppTools/ToolProperties.py:570 AppTools/ToolProperties.py:578
msgid "Box Area"
msgstr "Box Area"

#: AppTools/ToolProperties.py:573 AppTools/ToolProperties.py:581
msgid "Convex_Hull Area"
msgstr "Convex_Hull Area"

#: AppTools/ToolProperties.py:588 AppTools/ToolProperties.py:591
msgid "Copper Area"
msgstr "Copper Area"

#: AppTools/ToolPunchGerber.py:30 AppTools/ToolPunchGerber.py:323
msgid "Punch Gerber"
msgstr "Punch Gerber"

#: AppTools/ToolPunchGerber.py:65
msgid "Gerber into which to punch holes"
msgstr "Gerber into which to punch holes"

#: AppTools/ToolPunchGerber.py:85
msgid "ALL"
msgstr "ALL"

#: AppTools/ToolPunchGerber.py:166
msgid ""
"Remove the geometry of Excellon from the Gerber to create the holes in pads."
msgstr ""
"Remove the geometry of Excellon from the Gerber to create the holes in pads."

#: AppTools/ToolPunchGerber.py:325
msgid ""
"Create a Gerber object from the selected object, within\n"
"the specified box."
msgstr ""
"Create a Gerber object from the selected object, within\n"
"the specified box."

#: AppTools/ToolPunchGerber.py:425
msgid "Punch Tool"
msgstr "Punch Tool"

#: AppTools/ToolPunchGerber.py:599
msgid "The value of the fixed diameter is 0.0. Aborting."
msgstr "The value of the fixed diameter is 0.0. Aborting."

#: AppTools/ToolPunchGerber.py:607 AppTools/ToolPunchGerber.py:619
msgid ""
"Could not generate punched hole Gerber because the punch hole size is bigger "
"than some of the apertures in the Gerber object."
msgstr ""
"Could not generate punched hole Gerber because the punch hole size is bigger "
"than some of the apertures in the Gerber object."

#: AppTools/ToolPunchGerber.py:656
msgid ""
"Could not generate punched hole Gerber because the newly created object "
"geometry is the same as the one in the source object geometry..."
msgstr ""
"Could not generate punched hole Gerber because the newly created object "
"geometry is the same as the one in the source object geometry..."

#: AppTools/ToolQRCode.py:80
msgid "Gerber Object to which the QRCode will be added."
msgstr "Gerber Object to which the QRCode will be added."

#: AppTools/ToolQRCode.py:93
msgid "QRCode Parameters"
msgstr "QRCode Parameters"

#: AppTools/ToolQRCode.py:95
msgid "The parameters used to shape the QRCode."
msgstr "The parameters used to shape the QRCode."

#: AppTools/ToolQRCode.py:207
msgid "Export QRCode"
msgstr "Export QRCode"

#: AppTools/ToolQRCode.py:209
msgid ""
"Show a set of controls allowing to export the QRCode\n"
"to a SVG file or an PNG file."
msgstr ""
"Show a set of controls allowing to export the QRCode\n"
"to a SVG file or an PNG file."

#: AppTools/ToolQRCode.py:248
msgid "Transparent back color"
msgstr "Transparent back color"

#: AppTools/ToolQRCode.py:273
msgid "Export QRCode SVG"
msgstr "Export QRCode SVG"

#: AppTools/ToolQRCode.py:275
msgid "Export a SVG file with the QRCode content."
msgstr "Export a SVG file with the QRCode content."

#: AppTools/ToolQRCode.py:286
msgid "Export QRCode PNG"
msgstr "Export QRCode PNG"

#: AppTools/ToolQRCode.py:288
msgid "Export a PNG image file with the QRCode content."
msgstr "Export a PNG image file with the QRCode content."

#: AppTools/ToolQRCode.py:299
msgid "Insert QRCode"
msgstr "Insert QRCode"

#: AppTools/ToolQRCode.py:301
msgid "Create the QRCode object."
msgstr "Create the QRCode object."

#: AppTools/ToolQRCode.py:415 AppTools/ToolQRCode.py:750
#: AppTools/ToolQRCode.py:799
msgid "Cancelled. There is no QRCode Data in the text box."
msgstr "Cancelled. There is no QRCode Data in the text box."

#: AppTools/ToolQRCode.py:434
msgid "Generating QRCode geometry"
msgstr "Generating QRCode geometry"

#: AppTools/ToolQRCode.py:474
msgid "Click on the Destination point ..."
msgstr "Click on the Destination point ..."

#: AppTools/ToolQRCode.py:589
msgid "QRCode Tool done."
msgstr "QRCode Tool done."

#: AppTools/ToolQRCode.py:782 AppTools/ToolQRCode.py:786
msgid "Export PNG"
msgstr "Export PNG"

#: AppTools/ToolQRCode.py:829 AppTools/ToolQRCode.py:833 App_Main.py:6996
#: App_Main.py:7000
msgid "Export SVG"
msgstr "Export SVG"

#: AppTools/ToolRulesCheck.py:33
msgid "Check Rules"
msgstr "Check Rules"

#: AppTools/ToolRulesCheck.py:61
msgid "Gerber Files"
msgstr "Gerber Files"

#: AppTools/ToolRulesCheck.py:63
msgid "Gerber objects for which to check rules."
msgstr "Gerber objects for which to check rules."

#: AppTools/ToolRulesCheck.py:78
msgid "Top"
msgstr "Top"

#: AppTools/ToolRulesCheck.py:80
msgid "The Top Gerber Copper object for which rules are checked."
msgstr "The Top Gerber Copper object for which rules are checked."

#: AppTools/ToolRulesCheck.py:96
msgid "Bottom"
msgstr "Bottom"

#: AppTools/ToolRulesCheck.py:98
msgid "The Bottom Gerber Copper object for which rules are checked."
msgstr "The Bottom Gerber Copper object for which rules are checked."

#: AppTools/ToolRulesCheck.py:114
msgid "SM Top"
msgstr "SM Top"

#: AppTools/ToolRulesCheck.py:116
msgid "The Top Gerber Solder Mask object for which rules are checked."
msgstr "The Top Gerber Solder Mask object for which rules are checked."

#: AppTools/ToolRulesCheck.py:132
msgid "SM Bottom"
msgstr "SM Bottom"

#: AppTools/ToolRulesCheck.py:134
msgid "The Bottom Gerber Solder Mask object for which rules are checked."
msgstr "The Bottom Gerber Solder Mask object for which rules are checked."

#: AppTools/ToolRulesCheck.py:150
msgid "Silk Top"
msgstr "Silk Top"

#: AppTools/ToolRulesCheck.py:152
msgid "The Top Gerber Silkscreen object for which rules are checked."
msgstr "The Top Gerber Silkscreen object for which rules are checked."

#: AppTools/ToolRulesCheck.py:168
msgid "Silk Bottom"
msgstr "Silk Bottom"

#: AppTools/ToolRulesCheck.py:170
msgid "The Bottom Gerber Silkscreen object for which rules are checked."
msgstr "The Bottom Gerber Silkscreen object for which rules are checked."

#: AppTools/ToolRulesCheck.py:188
msgid "The Gerber Outline (Cutout) object for which rules are checked."
msgstr "The Gerber Outline (Cutout) object for which rules are checked."

#: AppTools/ToolRulesCheck.py:199
msgid "Excellon Objects"
msgstr "Excellon Objects"

#: AppTools/ToolRulesCheck.py:201
msgid "Excellon objects for which to check rules."
msgstr "Excellon objects for which to check rules."

#: AppTools/ToolRulesCheck.py:213
msgid "Excellon 1"
msgstr "Excellon 1"

#: AppTools/ToolRulesCheck.py:215
msgid ""
"Excellon object for which to check rules.\n"
"Holds the plated holes or a general Excellon file content."
msgstr ""
"Excellon object for which to check rules.\n"
"Holds the plated holes or a general Excellon file content."

#: AppTools/ToolRulesCheck.py:232
msgid "Excellon 2"
msgstr "Excellon 2"

#: AppTools/ToolRulesCheck.py:234
msgid ""
"Excellon object for which to check rules.\n"
"Holds the non-plated holes."
msgstr ""
"Excellon object for which to check rules.\n"
"Holds the non-plated holes."

#: AppTools/ToolRulesCheck.py:247
msgid "All Rules"
msgstr "All Rules"

#: AppTools/ToolRulesCheck.py:249
msgid "This check/uncheck all the rules below."
msgstr "This check/uncheck all the rules below."

#: AppTools/ToolRulesCheck.py:499
msgid "Run Rules Check"
msgstr "Run Rules Check"

#: AppTools/ToolRulesCheck.py:1158 AppTools/ToolRulesCheck.py:1218
#: AppTools/ToolRulesCheck.py:1255 AppTools/ToolRulesCheck.py:1327
#: AppTools/ToolRulesCheck.py:1381 AppTools/ToolRulesCheck.py:1419
#: AppTools/ToolRulesCheck.py:1484
msgid "Value is not valid."
msgstr "Value is not valid."

#: AppTools/ToolRulesCheck.py:1172
msgid "TOP -> Copper to Copper clearance"
msgstr "TOP -> Copper to Copper clearance"

#: AppTools/ToolRulesCheck.py:1183
msgid "BOTTOM -> Copper to Copper clearance"
msgstr "BOTTOM -> Copper to Copper clearance"

#: AppTools/ToolRulesCheck.py:1188 AppTools/ToolRulesCheck.py:1282
#: AppTools/ToolRulesCheck.py:1446
msgid ""
"At least one Gerber object has to be selected for this rule but none is "
"selected."
msgstr ""
"At least one Gerber object has to be selected for this rule but none is "
"selected."

#: AppTools/ToolRulesCheck.py:1224
msgid ""
"One of the copper Gerber objects or the Outline Gerber object is not valid."
msgstr ""
"One of the copper Gerber objects or the Outline Gerber object is not valid."

#: AppTools/ToolRulesCheck.py:1237 AppTools/ToolRulesCheck.py:1401
msgid ""
"Outline Gerber object presence is mandatory for this rule but it is not "
"selected."
msgstr ""
"Outline Gerber object presence is mandatory for this rule but it is not "
"selected."

#: AppTools/ToolRulesCheck.py:1254 AppTools/ToolRulesCheck.py:1281
msgid "Silk to Silk clearance"
msgstr "Silk to Silk clearance"

#: AppTools/ToolRulesCheck.py:1267
msgid "TOP -> Silk to Silk clearance"
msgstr "TOP -> Silk to Silk clearance"

#: AppTools/ToolRulesCheck.py:1277
msgid "BOTTOM -> Silk to Silk clearance"
msgstr "BOTTOM -> Silk to Silk clearance"

#: AppTools/ToolRulesCheck.py:1333
msgid "One or more of the Gerber objects is not valid."
msgstr "One or more of the Gerber objects is not valid."

#: AppTools/ToolRulesCheck.py:1341
msgid "TOP -> Silk to Solder Mask Clearance"
msgstr "TOP -> Silk to Solder Mask Clearance"

#: AppTools/ToolRulesCheck.py:1347
msgid "BOTTOM -> Silk to Solder Mask Clearance"
msgstr "BOTTOM -> Silk to Solder Mask Clearance"

#: AppTools/ToolRulesCheck.py:1351
msgid ""
"Both Silk and Solder Mask Gerber objects has to be either both Top or both "
"Bottom."
msgstr ""
"Both Silk and Solder Mask Gerber objects has to be either both Top or both "
"Bottom."

#: AppTools/ToolRulesCheck.py:1387
msgid ""
"One of the Silk Gerber objects or the Outline Gerber object is not valid."
msgstr ""
"One of the Silk Gerber objects or the Outline Gerber object is not valid."

#: AppTools/ToolRulesCheck.py:1431
msgid "TOP -> Minimum Solder Mask Sliver"
msgstr "TOP -> Minimum Solder Mask Sliver"

#: AppTools/ToolRulesCheck.py:1441
msgid "BOTTOM -> Minimum Solder Mask Sliver"
msgstr "BOTTOM -> Minimum Solder Mask Sliver"

#: AppTools/ToolRulesCheck.py:1490
msgid "One of the Copper Gerber objects or the Excellon objects is not valid."
msgstr "One of the Copper Gerber objects or the Excellon objects is not valid."

#: AppTools/ToolRulesCheck.py:1506
msgid ""
"Excellon object presence is mandatory for this rule but none is selected."
msgstr ""
"Excellon object presence is mandatory for this rule but none is selected."

#: AppTools/ToolRulesCheck.py:1579 AppTools/ToolRulesCheck.py:1592
#: AppTools/ToolRulesCheck.py:1603 AppTools/ToolRulesCheck.py:1616
msgid "STATUS"
msgstr "STATUS"

#: AppTools/ToolRulesCheck.py:1582 AppTools/ToolRulesCheck.py:1606
msgid "FAILED"
msgstr "FAILED"

#: AppTools/ToolRulesCheck.py:1595 AppTools/ToolRulesCheck.py:1619
msgid "PASSED"
msgstr "PASSED"

#: AppTools/ToolRulesCheck.py:1596 AppTools/ToolRulesCheck.py:1620
msgid "Violations: There are no violations for the current rule."
msgstr "Violations: There are no violations for the current rule."

#: AppTools/ToolShell.py:74 AppTools/ToolShell.py:76
msgid "...processing..."
msgstr "...processing..."

#: AppTools/ToolSolderPaste.py:37
msgid "Solder Paste Tool"
msgstr "Solder Paste Tool"

#: AppTools/ToolSolderPaste.py:69
msgid "Gerber Solder paste object.                        "
msgstr "Gerber Solder paste object.                        "

#: AppTools/ToolSolderPaste.py:76
msgid ""
"Tools pool from which the algorithm\n"
"will pick the ones used for dispensing solder paste."
msgstr ""
"Tools pool from which the algorithm\n"
"will pick the ones used for dispensing solder paste."

#: AppTools/ToolSolderPaste.py:91
msgid ""
"This is the Tool Number.\n"
"The solder dispensing will start with the tool with the biggest \n"
"diameter, continuing until there are no more Nozzle tools.\n"
"If there are no longer tools but there are still pads not covered\n"
" with solder paste, the app will issue a warning message box."
msgstr ""
"This is the Tool Number.\n"
"The solder dispensing will start with the tool with the biggest \n"
"diameter, continuing until there are no more Nozzle tools.\n"
"If there are no longer tools but there are still pads not covered\n"
" with solder paste, the app will issue a warning message box."

#: AppTools/ToolSolderPaste.py:98
msgid ""
"Nozzle tool Diameter. It's value (in current FlatCAM units)\n"
"is the width of the solder paste dispensed."
msgstr ""
"Nozzle tool Diameter. It's value (in current FlatCAM units)\n"
"is the width of the solder paste dispensed."

#: AppTools/ToolSolderPaste.py:105
msgid "New Nozzle Tool"
msgstr "New Nozzle Tool"

#: AppTools/ToolSolderPaste.py:124
msgid ""
"Add a new nozzle tool to the Tool Table\n"
"with the diameter specified above."
msgstr ""
"Add a new nozzle tool to the Tool Table\n"
"with the diameter specified above."

#: AppTools/ToolSolderPaste.py:136
msgid "Generate solder paste dispensing geometry."
msgstr "Generate solder paste dispensing geometry."

#: AppTools/ToolSolderPaste.py:155
msgid "STEP 1"
msgstr "STEP 1"

#: AppTools/ToolSolderPaste.py:157
msgid ""
"First step is to select a number of nozzle tools for usage\n"
"and then optionally modify the GCode parameters below."
msgstr ""
"First step is to select a number of nozzle tools for usage\n"
"and then optionally modify the GCode parameters below."

#: AppTools/ToolSolderPaste.py:160
msgid ""
"Select tools.\n"
"Modify parameters."
msgstr ""
"Select tools.\n"
"Modify parameters."

#: AppTools/ToolSolderPaste.py:280
msgid ""
"Feedrate (speed) while moving up vertically\n"
" to Dispense position (on Z plane)."
msgstr ""
"Feedrate (speed) while moving up vertically\n"
" to Dispense position (on Z plane)."

#: AppTools/ToolSolderPaste.py:350
msgid ""
"Generate GCode for Solder Paste dispensing\n"
"on PCB pads."
msgstr ""
"Generate GCode for Solder Paste dispensing\n"
"on PCB pads."

#: AppTools/ToolSolderPaste.py:371
msgid "STEP 2"
msgstr "STEP 2"

#: AppTools/ToolSolderPaste.py:373
msgid ""
"Second step is to create a solder paste dispensing\n"
"geometry out of an Solder Paste Mask Gerber file."
msgstr ""
"Second step is to create a solder paste dispensing\n"
"geometry out of an Solder Paste Mask Gerber file."

#: AppTools/ToolSolderPaste.py:390
msgid "Geo Result"
msgstr "Geo Result"

#: AppTools/ToolSolderPaste.py:392
msgid ""
"Geometry Solder Paste object.\n"
"The name of the object has to end in:\n"
"'_solderpaste' as a protection."
msgstr ""
"Geometry Solder Paste object.\n"
"The name of the object has to end in:\n"
"'_solderpaste' as a protection."

#: AppTools/ToolSolderPaste.py:401
msgid "STEP 3"
msgstr "STEP 3"

#: AppTools/ToolSolderPaste.py:403
msgid ""
"Third step is to select a solder paste dispensing geometry,\n"
"and then generate a CNCJob object.\n"
"\n"
"REMEMBER: if you want to create a CNCJob with new parameters,\n"
"first you need to generate a geometry with those new params,\n"
"and only after that you can generate an updated CNCJob."
msgstr ""
"Third step is to select a solder paste dispensing geometry,\n"
"and then generate a CNCJob object.\n"
"\n"
"REMEMBER: if you want to create a CNCJob with new parameters,\n"
"first you need to generate a geometry with those new params,\n"
"and only after that you can generate an updated CNCJob."

#: AppTools/ToolSolderPaste.py:424
msgid "CNC Result"
msgstr "CNC Result"

#: AppTools/ToolSolderPaste.py:426
msgid ""
"CNCJob Solder paste object.\n"
"In order to enable the GCode save section,\n"
"the name of the object has to end in:\n"
"'_solderpaste' as a protection."
msgstr ""
"CNCJob Solder paste object.\n"
"In order to enable the GCode save section,\n"
"the name of the object has to end in:\n"
"'_solderpaste' as a protection."

#: AppTools/ToolSolderPaste.py:436
msgid "View GCode"
msgstr "View GCode"

#: AppTools/ToolSolderPaste.py:438
msgid ""
"View the generated GCode for Solder Paste dispensing\n"
"on PCB pads."
msgstr ""
"View the generated GCode for Solder Paste dispensing\n"
"on PCB pads."

#: AppTools/ToolSolderPaste.py:448
msgid "Save GCode"
msgstr "Save GCode"

#: AppTools/ToolSolderPaste.py:450
msgid ""
"Save the generated GCode for Solder Paste dispensing\n"
"on PCB pads, to a file."
msgstr ""
"Save the generated GCode for Solder Paste dispensing\n"
"on PCB pads, to a file."

#: AppTools/ToolSolderPaste.py:460
msgid "STEP 4"
msgstr "STEP 4"

#: AppTools/ToolSolderPaste.py:462
msgid ""
"Fourth step (and last) is to select a CNCJob made from \n"
"a solder paste dispensing geometry, and then view/save it's GCode."
msgstr ""
"Fourth step (and last) is to select a CNCJob made from \n"
"a solder paste dispensing geometry, and then view/save it's GCode."

#: AppTools/ToolSolderPaste.py:922
msgid "New Nozzle tool added to Tool Table."
msgstr "New Nozzle tool added to Tool Table."

#: AppTools/ToolSolderPaste.py:965
msgid "Nozzle tool from Tool Table was edited."
msgstr "Nozzle tool from Tool Table was edited."

#: AppTools/ToolSolderPaste.py:1024
msgid "Delete failed. Select a Nozzle tool to delete."
msgstr "Delete failed. Select a Nozzle tool to delete."

#: AppTools/ToolSolderPaste.py:1030
msgid "Nozzle tool(s) deleted from Tool Table."
msgstr "Nozzle tool(s) deleted from Tool Table."

#: AppTools/ToolSolderPaste.py:1086
msgid "No SolderPaste mask Gerber object loaded."
msgstr "No SolderPaste mask Gerber object loaded."

#: AppTools/ToolSolderPaste.py:1104
msgid "Creating Solder Paste dispensing geometry."
msgstr "Creating Solder Paste dispensing geometry."

#: AppTools/ToolSolderPaste.py:1117
msgid "No Nozzle tools in the tool table."
msgstr "No Nozzle tools in the tool table."

#: AppTools/ToolSolderPaste.py:1243
msgid "Cancelled. Empty file, it has no geometry..."
msgstr "Cancelled. Empty file, it has no geometry..."

#: AppTools/ToolSolderPaste.py:1246
msgid "Solder Paste geometry generated successfully"
msgstr "Solder Paste geometry generated successfully"

#: AppTools/ToolSolderPaste.py:1253
msgid "Some or all pads have no solder due of inadequate nozzle diameters..."
msgstr "Some or all pads have no solder due of inadequate nozzle diameters..."

#: AppTools/ToolSolderPaste.py:1267
msgid "Generating Solder Paste dispensing geometry..."
msgstr "Generating Solder Paste dispensing geometry..."

#: AppTools/ToolSolderPaste.py:1287
msgid "There is no Geometry object available."
msgstr "There is no Geometry object available."

#: AppTools/ToolSolderPaste.py:1292
msgid "This Geometry can't be processed. NOT a solder_paste_tool geometry."
msgstr "This Geometry can't be processed. NOT a solder_paste_tool geometry."

#: AppTools/ToolSolderPaste.py:1328
msgid "An internal error has ocurred. See shell.\n"
msgstr "An internal error has ocurred. See shell.\n"

#: AppTools/ToolSolderPaste.py:1393
msgid "ToolSolderPaste CNCjob created"
msgstr "ToolSolderPaste CNCjob created"

#: AppTools/ToolSolderPaste.py:1412
msgid "SP GCode Editor"
msgstr "SP GCode Editor"

#: AppTools/ToolSolderPaste.py:1424 AppTools/ToolSolderPaste.py:1429
#: AppTools/ToolSolderPaste.py:1484
msgid ""
"This CNCJob object can't be processed. NOT a solder_paste_tool CNCJob object."
msgstr ""
"This CNCJob object can't be processed. NOT a solder_paste_tool CNCJob object."

#: AppTools/ToolSolderPaste.py:1454
msgid "No Gcode in the object"
msgstr "No Gcode in the object"

#: AppTools/ToolSolderPaste.py:1494
msgid "Export GCode ..."
msgstr "Export GCode ..."

#: AppTools/ToolSolderPaste.py:1542
msgid "Solder paste dispenser GCode file saved to"
msgstr "Solder paste dispenser GCode file saved to"

#: AppTools/ToolSub.py:65
msgid "Gerber Objects"
msgstr "Gerber Objects"

#: AppTools/ToolSub.py:78
msgid ""
"Gerber object from which to subtract\n"
"the subtractor Gerber object."
msgstr ""
"Gerber object from which to subtract\n"
"the subtractor Gerber object."

#: AppTools/ToolSub.py:91 AppTools/ToolSub.py:146
msgid "Subtractor"
msgstr "Subtractor"

#: AppTools/ToolSub.py:93
msgid ""
"Gerber object that will be subtracted\n"
"from the target Gerber object."
msgstr ""
"Gerber object that will be subtracted\n"
"from the target Gerber object."

#: AppTools/ToolSub.py:100
msgid "Subtract Gerber"
msgstr "Subtract Gerber"

#: AppTools/ToolSub.py:102
msgid ""
"Will remove the area occupied by the subtractor\n"
"Gerber from the Target Gerber.\n"
"Can be used to remove the overlapping silkscreen\n"
"over the soldermask."
msgstr ""
"Will remove the area occupied by the subtractor\n"
"Gerber from the Target Gerber.\n"
"Can be used to remove the overlapping silkscreen\n"
"over the soldermask."

#: AppTools/ToolSub.py:120
msgid "Geometry Objects"
msgstr "Geometry Objects"

#: AppTools/ToolSub.py:133
msgid ""
"Geometry object from which to subtract\n"
"the subtractor Geometry object."
msgstr ""
"Geometry object from which to subtract\n"
"the subtractor Geometry object."

#: AppTools/ToolSub.py:148
msgid ""
"Geometry object that will be subtracted\n"
"from the target Geometry object."
msgstr ""
"Geometry object that will be subtracted\n"
"from the target Geometry object."

#: AppTools/ToolSub.py:156
msgid ""
"Checking this will close the paths cut by the Geometry subtractor object."
msgstr ""
"Checking this will close the paths cut by the Geometry subtractor object."

#: AppTools/ToolSub.py:159
msgid "Subtract Geometry"
msgstr "Subtract Geometry"

#: AppTools/ToolSub.py:161
msgid ""
"Will remove the area occupied by the subtractor\n"
"Geometry from the Target Geometry."
msgstr ""
"Will remove the area occupied by the subtractor\n"
"Geometry from the Target Geometry."

#: AppTools/ToolSub.py:263
msgid "Sub Tool"
msgstr "Sub Tool"

#: AppTools/ToolSub.py:284 AppTools/ToolSub.py:489
msgid "No Target object loaded."
msgstr "No Target object loaded."

#: AppTools/ToolSub.py:287
msgid "Loading geometry from Gerber objects."
msgstr "Loading geometry from Gerber objects."

#: AppTools/ToolSub.py:299 AppTools/ToolSub.py:504
msgid "No Subtractor object loaded."
msgstr "No Subtractor object loaded."

#: AppTools/ToolSub.py:331
msgid "Processing geometry from Subtractor Gerber object."
msgstr "Processing geometry from Subtractor Gerber object."

#: AppTools/ToolSub.py:352
msgid "Parsing geometry for aperture"
msgstr "Parsing geometry for aperture"

#: AppTools/ToolSub.py:413
msgid "Finished parsing geometry for aperture"
msgstr "Finished parsing geometry for aperture"

#: AppTools/ToolSub.py:458 AppTools/ToolSub.py:661
msgid "Generating new object ..."
msgstr "Generating new object ..."

#: AppTools/ToolSub.py:462 AppTools/ToolSub.py:665 AppTools/ToolSub.py:746
msgid "Generating new object failed."
msgstr "Generating new object failed."

#: AppTools/ToolSub.py:467 AppTools/ToolSub.py:671
msgid "Created"
msgstr "Created"

#: AppTools/ToolSub.py:518
msgid "Currently, the Subtractor geometry cannot be of type Multigeo."
msgstr "Currently, the Subtractor geometry cannot be of type Multigeo."

#: AppTools/ToolSub.py:563
msgid "Parsing solid_geometry ..."
msgstr "Parsing solid_geometry ..."

#: AppTools/ToolSub.py:565
msgid "Parsing solid_geometry for tool"
msgstr "Parsing solid_geometry for tool"

#: AppTools/ToolTransform.py:23
msgid "Object Transform"
msgstr "Object Transform"

#: AppTools/ToolTransform.py:78
msgid ""
"Rotate the selected object(s).\n"
"The point of reference is the middle of\n"
"the bounding box for all selected objects."
msgstr ""
"Rotate the selected object(s).\n"
"The point of reference is the middle of\n"
"the bounding box for all selected objects."

#: AppTools/ToolTransform.py:99 AppTools/ToolTransform.py:120
msgid ""
"Angle for Skew action, in degrees.\n"
"Float number between -360 and 360."
msgstr ""
"Angle for Skew action, in degrees.\n"
"Float number between -360 and 360."

#: AppTools/ToolTransform.py:109 AppTools/ToolTransform.py:130
msgid ""
"Skew/shear the selected object(s).\n"
"The point of reference is the middle of\n"
"the bounding box for all selected objects."
msgstr ""
"Skew/shear the selected object(s).\n"
"The point of reference is the middle of\n"
"the bounding box for all selected objects."

#: AppTools/ToolTransform.py:159 AppTools/ToolTransform.py:179
msgid ""
"Scale the selected object(s).\n"
"The point of reference depends on \n"
"the Scale reference checkbox state."
msgstr ""
"Scale the selected object(s).\n"
"The point of reference depends on \n"
"the Scale reference checkbox state."

#: AppTools/ToolTransform.py:228 AppTools/ToolTransform.py:248
msgid ""
"Offset the selected object(s).\n"
"The point of reference is the middle of\n"
"the bounding box for all selected objects.\n"
msgstr ""
"Offset the selected object(s).\n"
"The point of reference is the middle of\n"
"the bounding box for all selected objects.\n"

#: AppTools/ToolTransform.py:268 AppTools/ToolTransform.py:273
msgid "Flip the selected object(s) over the X axis."
msgstr "Flip the selected object(s) over the X axis."

#: AppTools/ToolTransform.py:297
msgid "Ref. Point"
msgstr "Ref. Point"

#: AppTools/ToolTransform.py:348
msgid ""
"Create the buffer effect on each geometry,\n"
"element from the selected object, using the distance."
msgstr ""
"Create the buffer effect on each geometry,\n"
"element from the selected object, using the distance."

#: AppTools/ToolTransform.py:374
msgid ""
"Create the buffer effect on each geometry,\n"
"element from the selected object, using the factor."
msgstr ""
"Create the buffer effect on each geometry,\n"
"element from the selected object, using the factor."

#: AppTools/ToolTransform.py:479
msgid "Buffer D"
msgstr "Buffer D"

#: AppTools/ToolTransform.py:480
msgid "Buffer F"
msgstr "Buffer F"

#: AppTools/ToolTransform.py:557
msgid "Rotate transformation can not be done for a value of 0."
msgstr "Rotate transformation can not be done for a value of 0."

#: AppTools/ToolTransform.py:596 AppTools/ToolTransform.py:619
msgid "Scale transformation can not be done for a factor of 0 or 1."
msgstr "Scale transformation can not be done for a factor of 0 or 1."

#: AppTools/ToolTransform.py:634 AppTools/ToolTransform.py:644
msgid "Offset transformation can not be done for a value of 0."
msgstr "Offset transformation can not be done for a value of 0."

#: AppTools/ToolTransform.py:676
msgid "No object selected. Please Select an object to rotate!"
msgstr "No object selected. Please Select an object to rotate!"

#: AppTools/ToolTransform.py:702
msgid "CNCJob objects can't be rotated."
msgstr "CNCJob objects can't be rotated."

#: AppTools/ToolTransform.py:710
msgid "Rotate done"
msgstr "Rotate done"

#: AppTools/ToolTransform.py:713 AppTools/ToolTransform.py:783
#: AppTools/ToolTransform.py:833 AppTools/ToolTransform.py:887
#: AppTools/ToolTransform.py:917 AppTools/ToolTransform.py:953
msgid "Due of"
msgstr "Due of"

#: AppTools/ToolTransform.py:713 AppTools/ToolTransform.py:783
#: AppTools/ToolTransform.py:833 AppTools/ToolTransform.py:887
#: AppTools/ToolTransform.py:917 AppTools/ToolTransform.py:953
msgid "action was not executed."
msgstr "action was not executed."

#: AppTools/ToolTransform.py:725
msgid "No object selected. Please Select an object to flip"
msgstr "No object selected. Please Select an object to flip"

#: AppTools/ToolTransform.py:758
msgid "CNCJob objects can't be mirrored/flipped."
msgstr "CNCJob objects can't be mirrored/flipped."

#: AppTools/ToolTransform.py:793
msgid "Skew transformation can not be done for 0, 90 and 180 degrees."
msgstr "Skew transformation can not be done for 0, 90 and 180 degrees."

#: AppTools/ToolTransform.py:798
msgid "No object selected. Please Select an object to shear/skew!"
msgstr "No object selected. Please Select an object to shear/skew!"

#: AppTools/ToolTransform.py:818
msgid "CNCJob objects can't be skewed."
msgstr "CNCJob objects can't be skewed."

#: AppTools/ToolTransform.py:830
msgid "Skew on the"
msgstr "Skew on the"

#: AppTools/ToolTransform.py:830 AppTools/ToolTransform.py:884
#: AppTools/ToolTransform.py:914
msgid "axis done"
msgstr "axis done"

#: AppTools/ToolTransform.py:844
msgid "No object selected. Please Select an object to scale!"
msgstr "No object selected. Please Select an object to scale!"

#: AppTools/ToolTransform.py:875
msgid "CNCJob objects can't be scaled."
msgstr "CNCJob objects can't be scaled."

#: AppTools/ToolTransform.py:884
msgid "Scale on the"
msgstr "Scale on the"

#: AppTools/ToolTransform.py:894
msgid "No object selected. Please Select an object to offset!"
msgstr "No object selected. Please Select an object to offset!"

#: AppTools/ToolTransform.py:901
msgid "CNCJob objects can't be offset."
msgstr "CNCJob objects can't be offset."

#: AppTools/ToolTransform.py:914
msgid "Offset on the"
msgstr "Offset on the"

#: AppTools/ToolTransform.py:924
msgid "No object selected. Please Select an object to buffer!"
msgstr "No object selected. Please Select an object to buffer!"

#: AppTools/ToolTransform.py:927
msgid "Applying Buffer"
msgstr "Applying Buffer"

#: AppTools/ToolTransform.py:931
msgid "CNCJob objects can't be buffered."
msgstr "CNCJob objects can't be buffered."

#: AppTools/ToolTransform.py:948
msgid "Buffer done"
msgstr "Buffer done"

#: AppTranslation.py:104
msgid "The application will restart."
msgstr "The application will restart."

#: AppTranslation.py:106
msgid "Are you sure do you want to change the current language to"
msgstr "Are you sure do you want to change the current language to"

#: AppTranslation.py:107
msgid "Apply Language ..."
msgstr "Apply Language ..."

#: AppTranslation.py:201 App_Main.py:3089
msgid ""
"There are files/objects modified in FlatCAM. \n"
"Do you want to Save the project?"
msgstr ""
"There are files/objects modified in FlatCAM. \n"
"Do you want to Save the project?"

#: AppTranslation.py:204 App_Main.py:3092 App_Main.py:6584
msgid "Save changes"
msgstr "Save changes"

#: App_Main.py:477
msgid "FlatCAM is initializing ..."
msgstr "FlatCAM is initializing ..."

#: App_Main.py:623
msgid "Could not find the Language files. The App strings are missing."
msgstr "Could not find the Language files. The App strings are missing."

#: App_Main.py:695
msgid ""
"FlatCAM is initializing ...\n"
"Canvas initialization started."
msgstr ""
"FlatCAM is initializing ...\n"
"Canvas initialization started."

#: App_Main.py:715
msgid ""
"FlatCAM is initializing ...\n"
"Canvas initialization started.\n"
"Canvas initialization finished in"
msgstr ""
"FlatCAM is initializing ...\n"
"Canvas initialization started.\n"
"Canvas initialization finished in"

#: App_Main.py:1568 App_Main.py:6695
msgid "New Project - Not saved"
msgstr "New Project - Not saved"

#: App_Main.py:1669
msgid ""
"Found old default preferences files. Please reboot the application to update."
msgstr ""
"Found old default preferences files. Please reboot the application to update."

#: App_Main.py:1736
msgid "Open Config file failed."
msgstr "Open Config file failed."

#: App_Main.py:1751
msgid "Open Script file failed."
msgstr "Open Script file failed."

#: App_Main.py:1777
msgid "Open Excellon file failed."
msgstr "Open Excellon file failed."

#: App_Main.py:1790
msgid "Open GCode file failed."
msgstr "Open GCode file failed."

#: App_Main.py:1803
msgid "Open Gerber file failed."
msgstr "Open Gerber file failed."

#: App_Main.py:2117
#| msgid "Select a Geometry, Gerber or Excellon Object to edit."
msgid "Select a Geometry, Gerber, Excellon or CNCJob Object to edit."
msgstr "Select a Geometry, Gerber, Excellon or CNCJob Object to edit."

#: App_Main.py:2132
msgid ""
"Simultaneous editing of tools geometry in a MultiGeo Geometry is not "
"possible.\n"
"Edit only one geometry at a time."
msgstr ""
"Simultaneous editing of tools geometry in a MultiGeo Geometry is not "
"possible.\n"
"Edit only one geometry at a time."

#: App_Main.py:2198
msgid "Editor is activated ..."
msgstr "Editor is activated ..."

#: App_Main.py:2219
msgid "Do you want to save the edited object?"
msgstr "Do you want to save the edited object?"

#: App_Main.py:2257
msgid "Object empty after edit."
msgstr "Object empty after edit."

#: App_Main.py:2261 App_Main.py:2282 App_Main.py:2304
msgid "Editor exited. Editor content saved."
msgstr "Editor exited. Editor content saved."

#: App_Main.py:2308 App_Main.py:2331 App_Main.py:2349
msgid "Select a Gerber, Geometry or Excellon Object to update."
msgstr "Select a Gerber, Geometry or Excellon Object to update."

#: App_Main.py:2311
msgid "is updated, returning to App..."
msgstr "is updated, returning to App..."

#: App_Main.py:2318
msgid "Editor exited. Editor content was not saved."
msgstr "Editor exited. Editor content was not saved."

#: App_Main.py:2444 App_Main.py:2448
msgid "Import FlatCAM Preferences"
msgstr "Import FlatCAM Preferences"

#: App_Main.py:2459
msgid "Imported Defaults from"
msgstr "Imported Defaults from"

#: App_Main.py:2479 App_Main.py:2484
msgid "Export FlatCAM Preferences"
msgstr "Export FlatCAM Preferences"

#: App_Main.py:2504
msgid "Exported preferences to"
msgstr "Exported preferences to"

#: App_Main.py:2524 App_Main.py:2529
msgid "Save to file"
msgstr "Save to file"

#: App_Main.py:2553
msgid "Could not load the file."
msgstr "Could not load the file."

#: App_Main.py:2569
msgid "Exported file to"
msgstr "Exported file to"

#: App_Main.py:2626
msgid "Failed to open recent files file for writing."
msgstr "Failed to open recent files file for writing."

#: App_Main.py:2637
msgid "Failed to open recent projects file for writing."
msgstr "Failed to open recent projects file for writing."

#: App_Main.py:2692
msgid "2D Computer-Aided Printed Circuit Board Manufacturing"
msgstr "2D Computer-Aided Printed Circuit Board Manufacturing"

#: App_Main.py:2693
msgid "Development"
msgstr "Development"

#: App_Main.py:2694
msgid "DOWNLOAD"
msgstr "DOWNLOAD"

#: App_Main.py:2695
msgid "Issue tracker"
msgstr "Issue tracker"

#: App_Main.py:2714
msgid "Licensed under the MIT license"
msgstr "Licensed under the MIT license"

#: App_Main.py:2723
msgid ""
"Permission is hereby granted, free of charge, to any person obtaining a "
"copy\n"
"of this software and associated documentation files (the \"Software\"), to "
"deal\n"
"in the Software without restriction, including without limitation the "
"rights\n"
"to use, copy, modify, merge, publish, distribute, sublicense, and/or sell\n"
"copies of the Software, and to permit persons to whom the Software is\n"
"furnished to do so, subject to the following conditions:\n"
"\n"
"The above copyright notice and this permission notice shall be included in\n"
"all copies or substantial portions of the Software.\n"
"\n"
"THE SOFTWARE IS PROVIDED \"AS IS\", WITHOUT WARRANTY OF ANY KIND, EXPRESS "
"OR\n"
"IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,\n"
"FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE\n"
"AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER\n"
"LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING "
"FROM,\n"
"OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN\n"
"THE SOFTWARE."
msgstr ""
"Permission is hereby granted, free of charge, to any person obtaining a "
"copy\n"
"of this software and associated documentation files (the \"Software\"), to "
"deal\n"
"in the Software without restriction, including without limitation the "
"rights\n"
"to use, copy, modify, merge, publish, distribute, sublicense, and/or sell\n"
"copies of the Software, and to permit persons to whom the Software is\n"
"furnished to do so, subject to the following conditions:\n"
"\n"
"The above copyright notice and this permission notice shall be included in\n"
"all copies or substantial portions of the Software.\n"
"\n"
"THE SOFTWARE IS PROVIDED \"AS IS\", WITHOUT WARRANTY OF ANY KIND, EXPRESS "
"OR\n"
"IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,\n"
"FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE\n"
"AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER\n"
"LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING "
"FROM,\n"
"OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN\n"
"THE SOFTWARE."

#: App_Main.py:2745
msgid ""
"Some of the icons used are from the following sources:<br><div>Icons by <a "
"href=\"https://www.flaticon.com/authors/freepik\" title=\"Freepik\">Freepik</"
"a> from <a href=\"https://www.flaticon.com/\"             title=\"Flaticon"
"\">www.flaticon.com</a></div><div>Icons by <a target=\"_blank\" href="
"\"https://icons8.com\">Icons8</a></div>Icons by <a href=\"http://www."
"onlinewebfonts.com\">oNline Web Fonts</a>"
msgstr ""
"Some of the icons used are from the following sources:<br><div>Icons by <a "
"href=\"https://www.flaticon.com/authors/freepik\" title=\"Freepik\">Freepik</"
"a> from <a href=\"https://www.flaticon.com/\"             title=\"Flaticon"
"\">www.flaticon.com</a></div><div>Icons by <a target=\"_blank\" href="
"\"https://icons8.com\">Icons8</a></div>Icons by <a href=\"http://www."
"onlinewebfonts.com\">oNline Web Fonts</a>"

#: App_Main.py:2778
msgid "Splash"
msgstr "Splash"

#: App_Main.py:2784
msgid "Programmers"
msgstr "Programmers"

#: App_Main.py:2790
msgid "Translators"
msgstr "Translators"

#: App_Main.py:2796
msgid "License"
msgstr "License"

#: App_Main.py:2802
msgid "Attributions"
msgstr "Attributions"

#: App_Main.py:2825
msgid "Programmer"
msgstr "Programmer"

#: App_Main.py:2826
msgid "Status"
msgstr "Status"

#: App_Main.py:2827 App_Main.py:2907
msgid "E-mail"
msgstr "E-mail"

#: App_Main.py:2830
msgid "Program Author"
msgstr "Program Author"

#: App_Main.py:2835
msgid "BETA Maintainer >= 2019"
msgstr "BETA Maintainer >= 2019"

#: App_Main.py:2904
msgid "Language"
msgstr "Language"

#: App_Main.py:2905
msgid "Translator"
msgstr "Translator"

#: App_Main.py:2906
msgid "Corrections"
msgstr "Corrections"

#: App_Main.py:3051
msgid ""
"This entry will resolve to another website if:\n"
"\n"
"1. FlatCAM.org website is down\n"
"2. Someone forked FlatCAM project and wants to point\n"
"to his own website\n"
"\n"
"If you can't get any informations about FlatCAM beta\n"
"use the YouTube channel link from the Help menu."
msgstr ""
"This entry will resolve to another website if:\n"
"\n"
"1. FlatCAM.org website is down\n"
"2. Someone forked FlatCAM project and wants to point\n"
"to his own website\n"
"\n"
"If you can't get any informations about FlatCAM beta\n"
"use the YouTube channel link from the Help menu."

#: App_Main.py:3058
msgid "Alternative website"
msgstr "Alternative website"

#: App_Main.py:3357
msgid "Selected Excellon file extensions registered with FlatCAM."
msgstr "Selected Excellon file extensions registered with FlatCAM."

#: App_Main.py:3379
msgid "Selected GCode file extensions registered with FlatCAM."
msgstr "Selected GCode file extensions registered with FlatCAM."

#: App_Main.py:3401
msgid "Selected Gerber file extensions registered with FlatCAM."
msgstr "Selected Gerber file extensions registered with FlatCAM."

#: App_Main.py:3589 App_Main.py:3648 App_Main.py:3676
msgid "At least two objects are required for join. Objects currently selected"
msgstr "At least two objects are required for join. Objects currently selected"

#: App_Main.py:3598
msgid ""
"Failed join. The Geometry objects are of different types.\n"
"At least one is MultiGeo type and the other is SingleGeo type. A possibility "
"is to convert from one to another and retry joining \n"
"but in the case of converting from MultiGeo to SingleGeo, informations may "
"be lost and the result may not be what was expected. \n"
"Check the generated GCODE."
msgstr ""
"Failed join. The Geometry objects are of different types.\n"
"At least one is MultiGeo type and the other is SingleGeo type. A possibility "
"is to convert from one to another and retry joining \n"
"but in the case of converting from MultiGeo to SingleGeo, informations may "
"be lost and the result may not be what was expected. \n"
"Check the generated GCODE."

#: App_Main.py:3610 App_Main.py:3620
msgid "Geometry merging finished"
msgstr "Geometry merging finished"

#: App_Main.py:3643
msgid "Failed. Excellon joining works only on Excellon objects."
msgstr "Failed. Excellon joining works only on Excellon objects."

#: App_Main.py:3653
msgid "Excellon merging finished"
msgstr "Excellon merging finished"

#: App_Main.py:3671
msgid "Failed. Gerber joining works only on Gerber objects."
msgstr "Failed. Gerber joining works only on Gerber objects."

#: App_Main.py:3681
msgid "Gerber merging finished"
msgstr "Gerber merging finished"

#: App_Main.py:3701 App_Main.py:3738
msgid "Failed. Select a Geometry Object and try again."
msgstr "Failed. Select a Geometry Object and try again."

#: App_Main.py:3705 App_Main.py:3743
msgid "Expected a GeometryObject, got"
msgstr "Expected a GeometryObject, got"

#: App_Main.py:3720
msgid "A Geometry object was converted to MultiGeo type."
msgstr "A Geometry object was converted to MultiGeo type."

#: App_Main.py:3758
msgid "A Geometry object was converted to SingleGeo type."
msgstr "A Geometry object was converted to SingleGeo type."

#: App_Main.py:3964
msgid "Toggle Units"
msgstr "Toggle Units"

#: App_Main.py:3966
msgid ""
"Changing the units of the project\n"
"will scale all objects.\n"
"\n"
"Do you want to continue?"
msgstr ""
"Changing the units of the project\n"
"will scale all objects.\n"
"\n"
"Do you want to continue?"

#: App_Main.py:3969 App_Main.py:4451 App_Main.py:4528 App_Main.py:6972
#: App_Main.py:6986 App_Main.py:7319 App_Main.py:7329
msgid "Ok"
msgstr "Ok"

#: App_Main.py:4019
msgid "Converted units to"
msgstr "Converted units to"

#: App_Main.py:4351
msgid "Detachable Tabs"
msgstr "Detachable Tabs"

#: App_Main.py:4380
#| msgid "Workspace Settings"
msgid "Workspace enabled."
msgstr "Workspace enabled."

#: App_Main.py:4383
#| msgid "Workspace Settings"
msgid "Workspace disabled."
msgstr "Workspace disabled."

#: App_Main.py:4447
msgid ""
"Adding Tool works only when Advanced is checked.\n"
"Go to Preferences -> General - Show Advanced Options."
msgstr ""
"Adding Tool works only when Advanced is checked.\n"
"Go to Preferences -> General - Show Advanced Options."

#: App_Main.py:4523
msgid "Delete objects"
msgstr "Delete objects"

#: App_Main.py:4526
msgid ""
"Are you sure you want to permanently delete\n"
"the selected objects?"
msgstr ""
"Are you sure you want to permanently delete\n"
"the selected objects?"

#: App_Main.py:4564
msgid "Object(s) deleted"
msgstr "Object(s) deleted"

#: App_Main.py:4574
msgid "Save the work in Editor and try again ..."
msgstr "Save the work in Editor and try again ..."

#: App_Main.py:4603
msgid "Object deleted"
msgstr "Object deleted"

#: App_Main.py:4630
msgid "Click to set the origin ..."
msgstr "Click to set the origin ..."

#: App_Main.py:4652
msgid "Setting Origin..."
msgstr "Setting Origin..."

#: App_Main.py:4665 App_Main.py:4767
msgid "Origin set"
msgstr "Origin set"

#: App_Main.py:4682
msgid "Origin coordinates specified but incomplete."
msgstr "Origin coordinates specified but incomplete."

#: App_Main.py:4723
msgid "Moving to Origin..."
msgstr "Moving to Origin..."

#: App_Main.py:4804
msgid "Jump to ..."
msgstr "Jump to ..."

#: App_Main.py:4805
msgid "Enter the coordinates in format X,Y:"
msgstr "Enter the coordinates in format X,Y:"

#: App_Main.py:4815
msgid "Wrong coordinates. Enter coordinates in format: X,Y"
msgstr "Wrong coordinates. Enter coordinates in format: X,Y"

#: App_Main.py:4933
msgid "Bottom-Left"
msgstr "Bottom-Left"

#: App_Main.py:4936
msgid "Top-Right"
msgstr "Top-Right"

#: App_Main.py:4957
msgid "Locate ..."
msgstr "Locate ..."

#: App_Main.py:5220 App_Main.py:5297
msgid "No object is selected. Select an object and try again."
msgstr "No object is selected. Select an object and try again."

#: App_Main.py:5323
msgid ""
"Aborting. The current task will be gracefully closed as soon as possible..."
msgstr ""
"Aborting. The current task will be gracefully closed as soon as possible..."

#: App_Main.py:5329
msgid "The current task was gracefully closed on user request..."
msgstr "The current task was gracefully closed on user request..."

#: App_Main.py:5474
msgid "Tools in Tools Database edited but not saved."
msgstr "Tools in Tools Database edited but not saved."

#: App_Main.py:5503
msgid "Adding tool from DB is not allowed for this object."
msgstr "Adding tool from DB is not allowed for this object."

#: App_Main.py:5521
msgid ""
"One or more Tools are edited.\n"
"Do you want to update the Tools Database?"
msgstr ""
"One or more Tools are edited.\n"
"Do you want to update the Tools Database?"

#: App_Main.py:5523
msgid "Save Tools Database"
msgstr "Save Tools Database"

#: App_Main.py:5576
msgid "No object selected to Flip on Y axis."
msgstr "No object selected to Flip on Y axis."

#: App_Main.py:5602
msgid "Flip on Y axis done."
msgstr "Flip on Y axis done."

#: App_Main.py:5624
msgid "No object selected to Flip on X axis."
msgstr "No object selected to Flip on X axis."

#: App_Main.py:5650
msgid "Flip on X axis done."
msgstr "Flip on X axis done."

#: App_Main.py:5672
msgid "No object selected to Rotate."
msgstr "No object selected to Rotate."

#: App_Main.py:5675 App_Main.py:5726 App_Main.py:5763
msgid "Transform"
msgstr "Transform"

#: App_Main.py:5675 App_Main.py:5726 App_Main.py:5763
msgid "Enter the Angle value:"
msgstr "Enter the Angle value:"

#: App_Main.py:5705
msgid "Rotation done."
msgstr "Rotation done."

#: App_Main.py:5707
msgid "Rotation movement was not executed."
msgstr "Rotation movement was not executed."

#: App_Main.py:5724
msgid "No object selected to Skew/Shear on X axis."
msgstr "No object selected to Skew/Shear on X axis."

#: App_Main.py:5745
msgid "Skew on X axis done."
msgstr "Skew on X axis done."

#: App_Main.py:5761
msgid "No object selected to Skew/Shear on Y axis."
msgstr "No object selected to Skew/Shear on Y axis."

#: App_Main.py:5782
msgid "Skew on Y axis done."
msgstr "Skew on Y axis done."

#: App_Main.py:5861
msgid "New Grid ..."
msgstr "New Grid ..."

#: App_Main.py:5862
msgid "Enter a Grid Value:"
msgstr "Enter a Grid Value:"

#: App_Main.py:5870 App_Main.py:5894
msgid "Please enter a grid value with non-zero value, in Float format."
msgstr "Please enter a grid value with non-zero value, in Float format."

#: App_Main.py:5875
msgid "New Grid added"
msgstr "New Grid added"

#: App_Main.py:5877
msgid "Grid already exists"
msgstr "Grid already exists"

#: App_Main.py:5879
msgid "Adding New Grid cancelled"
msgstr "Adding New Grid cancelled"

#: App_Main.py:5900
msgid " Grid Value does not exist"
msgstr " Grid Value does not exist"

#: App_Main.py:5902
msgid "Grid Value deleted"
msgstr "Grid Value deleted"

#: App_Main.py:5904
msgid "Delete Grid value cancelled"
msgstr "Delete Grid value cancelled"

#: App_Main.py:5910
msgid "Key Shortcut List"
msgstr "Key Shortcut List"

#: App_Main.py:5944
msgid " No object selected to copy it's name"
msgstr " No object selected to copy it's name"

#: App_Main.py:5948
msgid "Name copied on clipboard ..."
msgstr "Name copied on clipboard ..."

#: App_Main.py:6581
msgid ""
"There are files/objects opened in FlatCAM.\n"
"Creating a New project will delete them.\n"
"Do you want to Save the project?"
msgstr ""
"There are files/objects opened in FlatCAM.\n"
"Creating a New project will delete them.\n"
"Do you want to Save the project?"

#: App_Main.py:6602
msgid "New Project created"
msgstr "New Project created"

#: App_Main.py:6772 App_Main.py:6809 App_Main.py:6851 App_Main.py:6921
#: App_Main.py:7704 App_Main.py:8917 App_Main.py:8979
msgid ""
"Canvas initialization started.\n"
"Canvas initialization finished in"
msgstr ""
"Canvas initialization started.\n"
"Canvas initialization finished in"

#: App_Main.py:6774
msgid "Opening Gerber file."
msgstr "Opening Gerber file."

#: App_Main.py:6811
msgid "Opening Excellon file."
msgstr "Opening Excellon file."

#: App_Main.py:6842 App_Main.py:6846
msgid "Open G-Code"
msgstr "Open G-Code"

#: App_Main.py:6853
msgid "Opening G-Code file."
msgstr "Opening G-Code file."

#: App_Main.py:6912 App_Main.py:6916
msgid "Open HPGL2"
msgstr "Open HPGL2"

#: App_Main.py:6923
msgid "Opening HPGL2 file."
msgstr "Opening HPGL2 file."

#: App_Main.py:6946 App_Main.py:6949
msgid "Open Configuration File"
msgstr "Open Configuration File"

#: App_Main.py:6969 App_Main.py:7316
msgid "Please Select a Geometry object to export"
msgstr "Please Select a Geometry object to export"

#: App_Main.py:6983
msgid "Only Geometry, Gerber and CNCJob objects can be used."
msgstr "Only Geometry, Gerber and CNCJob objects can be used."

#: App_Main.py:7025
msgid "Data must be a 3D array with last dimension 3 or 4"
msgstr "Data must be a 3D array with last dimension 3 or 4"

#: App_Main.py:7031 App_Main.py:7035
msgid "Export PNG Image"
msgstr "Export PNG Image"

#: App_Main.py:7068 App_Main.py:7276
msgid "Failed. Only Gerber objects can be saved as Gerber files..."
msgstr "Failed. Only Gerber objects can be saved as Gerber files..."

#: App_Main.py:7080
msgid "Save Gerber source file"
msgstr "Save Gerber source file"

#: App_Main.py:7109
msgid "Failed. Only Script objects can be saved as TCL Script files..."
msgstr "Failed. Only Script objects can be saved as TCL Script files..."

#: App_Main.py:7121
msgid "Save Script source file"
msgstr "Save Script source file"

#: App_Main.py:7150
msgid "Failed. Only Document objects can be saved as Document files..."
msgstr "Failed. Only Document objects can be saved as Document files..."

#: App_Main.py:7162
msgid "Save Document source file"
msgstr "Save Document source file"

#: App_Main.py:7191 App_Main.py:7232 App_Main.py:8187
msgid "Failed. Only Excellon objects can be saved as Excellon files..."
msgstr "Failed. Only Excellon objects can be saved as Excellon files..."

#: App_Main.py:7199 App_Main.py:7203
msgid "Save Excellon source file"
msgstr "Save Excellon source file"

#: App_Main.py:7240 App_Main.py:7244
msgid "Export Excellon"
msgstr "Export Excellon"

#: App_Main.py:7284 App_Main.py:7288
msgid "Export Gerber"
msgstr "Export Gerber"

#: App_Main.py:7326
msgid "Only Geometry objects can be used."
msgstr "Only Geometry objects can be used."

#: App_Main.py:7340 App_Main.py:7344
msgid "Export DXF"
msgstr "Export DXF"

#: App_Main.py:7369 App_Main.py:7372
msgid "Import SVG"
msgstr "Import SVG"

#: App_Main.py:7400 App_Main.py:7404
msgid "Import DXF"
msgstr "Import DXF"

#: App_Main.py:7454
msgid "Viewing the source code of the selected object."
msgstr "Viewing the source code of the selected object."

#: App_Main.py:7461 App_Main.py:7465
msgid "Select an Gerber or Excellon file to view it's source file."
msgstr "Select an Gerber or Excellon file to view it's source file."

#: App_Main.py:7479
msgid "Source Editor"
msgstr "Source Editor"

#: App_Main.py:7519 App_Main.py:7526
msgid "There is no selected object for which to see it's source file code."
msgstr "There is no selected object for which to see it's source file code."

#: App_Main.py:7538
msgid "Failed to load the source code for the selected object"
msgstr "Failed to load the source code for the selected object"

#: App_Main.py:7574
msgid "Go to Line ..."
msgstr "Go to Line ..."

#: App_Main.py:7575
msgid "Line:"
msgstr "Line:"

#: App_Main.py:7602
msgid "New TCL script file created in Code Editor."
msgstr "New TCL script file created in Code Editor."

#: App_Main.py:7638 App_Main.py:7640 App_Main.py:7676 App_Main.py:7678
msgid "Open TCL script"
msgstr "Open TCL script"

#: App_Main.py:7706
msgid "Executing ScriptObject file."
msgstr "Executing ScriptObject file."

#: App_Main.py:7714 App_Main.py:7717
msgid "Run TCL script"
msgstr "Run TCL script"

#: App_Main.py:7740
msgid "TCL script file opened in Code Editor and executed."
msgstr "TCL script file opened in Code Editor and executed."

#: App_Main.py:7791 App_Main.py:7797
msgid "Save Project As ..."
msgstr "Save Project As ..."

#: App_Main.py:7832
msgid "FlatCAM objects print"
msgstr "FlatCAM objects print"

#: App_Main.py:7845 App_Main.py:7852
msgid "Save Object as PDF ..."
msgstr "Save Object as PDF ..."

#: App_Main.py:7861
msgid "Printing PDF ... Please wait."
msgstr "Printing PDF ... Please wait."

#: App_Main.py:8040
msgid "PDF file saved to"
msgstr "PDF file saved to"

#: App_Main.py:8065
msgid "Exporting SVG"
msgstr "Exporting SVG"

#: App_Main.py:8108
msgid "SVG file exported to"
msgstr "SVG file exported to"

#: App_Main.py:8134
msgid ""
"Save cancelled because source file is empty. Try to export the Gerber file."
msgstr ""
"Save cancelled because source file is empty. Try to export the Gerber file."

#: App_Main.py:8281
msgid "Excellon file exported to"
msgstr "Excellon file exported to"

#: App_Main.py:8290
msgid "Exporting Excellon"
msgstr "Exporting Excellon"

#: App_Main.py:8295 App_Main.py:8302
msgid "Could not export Excellon file."
msgstr "Could not export Excellon file."

#: App_Main.py:8417
msgid "Gerber file exported to"
msgstr "Gerber file exported to"

#: App_Main.py:8425
msgid "Exporting Gerber"
msgstr "Exporting Gerber"

#: App_Main.py:8430 App_Main.py:8437
msgid "Could not export Gerber file."
msgstr "Could not export Gerber file."

#: App_Main.py:8472
msgid "DXF file exported to"
msgstr "DXF file exported to"

#: App_Main.py:8478
msgid "Exporting DXF"
msgstr "Exporting DXF"

#: App_Main.py:8483 App_Main.py:8490
msgid "Could not export DXF file."
msgstr "Could not export DXF file."

#: App_Main.py:8524
msgid "Importing SVG"
msgstr "Importing SVG"

#: App_Main.py:8532 App_Main.py:8578
msgid "Import failed."
msgstr "Import failed."

#: App_Main.py:8570
msgid "Importing DXF"
msgstr "Importing DXF"

#: App_Main.py:8611 App_Main.py:8806 App_Main.py:8871
msgid "Failed to open file"
msgstr "Failed to open file"

#: App_Main.py:8614 App_Main.py:8809 App_Main.py:8874
msgid "Failed to parse file"
msgstr "Failed to parse file"

#: App_Main.py:8626
msgid "Object is not Gerber file or empty. Aborting object creation."
msgstr "Object is not Gerber file or empty. Aborting object creation."

#: App_Main.py:8631
msgid "Opening Gerber"
msgstr "Opening Gerber"

#: App_Main.py:8642
msgid "Open Gerber failed. Probable not a Gerber file."
msgstr "Open Gerber failed. Probable not a Gerber file."

#: App_Main.py:8678
msgid "Cannot open file"
msgstr "Cannot open file"

#: App_Main.py:8699
msgid "Opening Excellon."
msgstr "Opening Excellon."

#: App_Main.py:8709
msgid "Open Excellon file failed. Probable not an Excellon file."
msgstr "Open Excellon file failed. Probable not an Excellon file."

#: App_Main.py:8741
msgid "Reading GCode file"
msgstr "Reading GCode file"

#: App_Main.py:8754
msgid "This is not GCODE"
msgstr "This is not GCODE"

#: App_Main.py:8759
msgid "Opening G-Code."
msgstr "Opening G-Code."

#: App_Main.py:8772
msgid ""
"Failed to create CNCJob Object. Probable not a GCode file. Try to load it "
"from File menu.\n"
" Attempting to create a FlatCAM CNCJob Object from G-Code file failed during "
"processing"
msgstr ""
"Failed to create CNCJob Object. Probable not a GCode file. Try to load it "
"from File menu.\n"
" Attempting to create a FlatCAM CNCJob Object from G-Code file failed during "
"processing"

#: App_Main.py:8828
msgid "Object is not HPGL2 file or empty. Aborting object creation."
msgstr "Object is not HPGL2 file or empty. Aborting object creation."

#: App_Main.py:8833
msgid "Opening HPGL2"
msgstr "Opening HPGL2"

#: App_Main.py:8840
msgid " Open HPGL2 failed. Probable not a HPGL2 file."
msgstr " Open HPGL2 failed. Probable not a HPGL2 file."

#: App_Main.py:8866
msgid "TCL script file opened in Code Editor."
msgstr "TCL script file opened in Code Editor."

#: App_Main.py:8886
msgid "Opening TCL Script..."
msgstr "Opening TCL Script..."

#: App_Main.py:8897
msgid "Failed to open TCL Script."
msgstr "Failed to open TCL Script."

#: App_Main.py:8919
msgid "Opening FlatCAM Config file."
msgstr "Opening FlatCAM Config file."

#: App_Main.py:8947
msgid "Failed to open config file"
msgstr "Failed to open config file"

#: App_Main.py:8976
msgid "Loading Project ... Please Wait ..."
msgstr "Loading Project ... Please Wait ..."

#: App_Main.py:8981
msgid "Opening FlatCAM Project file."
msgstr "Opening FlatCAM Project file."

#: App_Main.py:8996 App_Main.py:9000 App_Main.py:9017
msgid "Failed to open project file"
msgstr "Failed to open project file"

#: App_Main.py:9054
msgid "Loading Project ... restoring"
msgstr "Loading Project ... restoring"

#: App_Main.py:9064
msgid "Project loaded from"
msgstr "Project loaded from"

#: App_Main.py:9090
msgid "Redrawing all objects"
msgstr "Redrawing all objects"

#: App_Main.py:9178
msgid "Failed to load recent item list."
msgstr "Failed to load recent item list."

#: App_Main.py:9185
msgid "Failed to parse recent item list."
msgstr "Failed to parse recent item list."

#: App_Main.py:9195
msgid "Failed to load recent projects item list."
msgstr "Failed to load recent projects item list."

#: App_Main.py:9202
msgid "Failed to parse recent project item list."
msgstr "Failed to parse recent project item list."

#: App_Main.py:9263
msgid "Clear Recent projects"
msgstr "Clear Recent projects"

#: App_Main.py:9287
msgid "Clear Recent files"
msgstr "Clear Recent files"

#: App_Main.py:9389
msgid "Selected Tab - Choose an Item from Project Tab"
msgstr "Selected Tab - Choose an Item from Project Tab"

#: App_Main.py:9390
msgid "Details"
msgstr "Details"

#: App_Main.py:9392
msgid "The normal flow when working in FlatCAM is the following:"
msgstr "The normal flow when working in FlatCAM is the following:"

#: App_Main.py:9393
#| msgid ""
#| "Load/Import a Gerber, Excellon, Gcode, DXF, Raster Image or SVG file into "
#| "FlatCAM using either the toolbars, key shortcuts or even dragging and "
#| "dropping the files on the GUI."
msgid ""
"Load/Import a Gerber, Excellon, Gcode, DXF, Raster Image or SVG file into "
"FlatCAM using either the toolbars, key shortcuts or even dragging and "
"dropping the files on the AppGUI."
msgstr ""
"Load/Import a Gerber, Excellon, Gcode, DXF, Raster Image or SVG file into "
"FlatCAM using either the toolbars, key shortcuts or even dragging and "
"dropping the files on the AppGUI."

#: App_Main.py:9396
#| msgid ""
#| "You can also load a FlatCAM project by double clicking on the project "
#| "file, drag and drop of the file into the FLATCAM GUI or through the menu "
#| "(or toolbar) actions offered within the app."
msgid ""
"You can also load a FlatCAM project by double clicking on the project file, "
"drag and drop of the file into the FLATCAM AppGUI or through the menu (or "
"toolbar) actions offered within the app."
msgstr ""
"You can also load a FlatCAM project by double clicking on the project file, "
"drag and drop of the file into the FLATCAM AppGUI or through the menu (or "
"toolbar) actions offered within the app."

#: App_Main.py:9399
msgid ""
"Once an object is available in the Project Tab, by selecting it and then "
"focusing on SELECTED TAB (more simpler is to double click the object name in "
"the Project Tab, SELECTED TAB will be updated with the object properties "
"according to its kind: Gerber, Excellon, Geometry or CNCJob object."
msgstr ""
"Once an object is available in the Project Tab, by selecting it and then "
"focusing on SELECTED TAB (more simpler is to double click the object name in "
"the Project Tab, SELECTED TAB will be updated with the object properties "
"according to its kind: Gerber, Excellon, Geometry or CNCJob object."

#: App_Main.py:9403
msgid ""
"If the selection of the object is done on the canvas by single click "
"instead, and the SELECTED TAB is in focus, again the object properties will "
"be displayed into the Selected Tab. Alternatively, double clicking on the "
"object on the canvas will bring the SELECTED TAB and populate it even if it "
"was out of focus."
msgstr ""
"If the selection of the object is done on the canvas by single click "
"instead, and the SELECTED TAB is in focus, again the object properties will "
"be displayed into the Selected Tab. Alternatively, double clicking on the "
"object on the canvas will bring the SELECTED TAB and populate it even if it "
"was out of focus."

#: App_Main.py:9407
msgid ""
"You can change the parameters in this screen and the flow direction is like "
"this:"
msgstr ""
"You can change the parameters in this screen and the flow direction is like "
"this:"

#: App_Main.py:9408
msgid ""
"Gerber/Excellon Object --> Change Parameter --> Generate Geometry --> "
"Geometry Object --> Add tools (change param in Selected Tab) --> Generate "
"CNCJob --> CNCJob Object --> Verify GCode (through Edit CNC Code) and/or "
"append/prepend to GCode (again, done in SELECTED TAB) --> Save GCode."
msgstr ""
"Gerber/Excellon Object --> Change Parameter --> Generate Geometry --> "
"Geometry Object --> Add tools (change param in Selected Tab) --> Generate "
"CNCJob --> CNCJob Object --> Verify GCode (through Edit CNC Code) and/or "
"append/prepend to GCode (again, done in SELECTED TAB) --> Save GCode."

#: App_Main.py:9412
msgid ""
"A list of key shortcuts is available through an menu entry in Help --> "
"Shortcuts List or through its own key shortcut: <b>F3</b>."
msgstr ""
"A list of key shortcuts is available through an menu entry in Help --> "
"Shortcuts List or through its own key shortcut: <b>F3</b>."

#: App_Main.py:9476
msgid "Failed checking for latest version. Could not connect."
msgstr "Failed checking for latest version. Could not connect."

#: App_Main.py:9483
msgid "Could not parse information about latest version."
msgstr "Could not parse information about latest version."

#: App_Main.py:9493
msgid "FlatCAM is up to date!"
msgstr "FlatCAM is up to date!"

#: App_Main.py:9498
msgid "Newer Version Available"
msgstr "Newer Version Available"

#: App_Main.py:9500
msgid "There is a newer version of FlatCAM available for download:"
msgstr "There is a newer version of FlatCAM available for download:"

#: App_Main.py:9504
msgid "info"
msgstr "info"

#: App_Main.py:9532
msgid ""
"OpenGL canvas initialization failed. HW or HW configuration not supported."
"Change the graphic engine to Legacy(2D) in Edit -> Preferences -> General "
"tab.\n"
"\n"
msgstr ""
"OpenGL canvas initialization failed. HW or HW configuration not supported."
"Change the graphic engine to Legacy(2D) in Edit -> Preferences -> General "
"tab.\n"
"\n"

#: App_Main.py:9610
msgid "All plots disabled."
msgstr "All plots disabled."

#: App_Main.py:9617
msgid "All non selected plots disabled."
msgstr "All non selected plots disabled."

#: App_Main.py:9624
msgid "All plots enabled."
msgstr "All plots enabled."

#: App_Main.py:9630
msgid "Selected plots enabled..."
msgstr "Selected plots enabled..."

#: App_Main.py:9638
msgid "Selected plots disabled..."
msgstr "Selected plots disabled..."

#: App_Main.py:9671
msgid "Enabling plots ..."
msgstr "Enabling plots ..."

#: App_Main.py:9720
msgid "Disabling plots ..."
msgstr "Disabling plots ..."

#: App_Main.py:9743
msgid "Working ..."
msgstr "Working ..."

#: App_Main.py:9852
msgid "Set alpha level ..."
msgstr "Set alpha level ..."

#: App_Main.py:9906
msgid "Saving FlatCAM Project"
msgstr "Saving FlatCAM Project"

#: App_Main.py:9927 App_Main.py:9963
msgid "Project saved to"
msgstr "Project saved to"

#: App_Main.py:9934
msgid "The object is used by another application."
msgstr "The object is used by another application."

#: App_Main.py:9948
msgid "Failed to verify project file"
msgstr "Failed to verify project file"

#: App_Main.py:9948 App_Main.py:9956 App_Main.py:9966
msgid "Retry to save it."
msgstr "Retry to save it."

#: App_Main.py:9956 App_Main.py:9966
msgid "Failed to parse saved project file"
msgstr "Failed to parse saved project file"

#: Bookmark.py:57 Bookmark.py:84
msgid "Title"
msgstr "Title"

#: Bookmark.py:58 Bookmark.py:88
msgid "Web Link"
msgstr "Web Link"

#: Bookmark.py:62
msgid ""
"Index.\n"
"The rows in gray color will populate the Bookmarks menu.\n"
"The number of gray colored rows is set in Preferences."
msgstr ""
"Index.\n"
"The rows in gray color will populate the Bookmarks menu.\n"
"The number of gray colored rows is set in Preferences."

#: Bookmark.py:66
msgid ""
"Description of the link that is set as an menu action.\n"
"Try to keep it short because it is installed as a menu item."
msgstr ""
"Description of the link that is set as an menu action.\n"
"Try to keep it short because it is installed as a menu item."

#: Bookmark.py:69
msgid "Web Link. E.g: https://your_website.org "
msgstr "Web Link. E.g: https://your_website.org "

#: Bookmark.py:78
msgid "New Bookmark"
msgstr "New Bookmark"

#: Bookmark.py:97
msgid "Add Entry"
msgstr "Add Entry"

#: Bookmark.py:98
msgid "Remove Entry"
msgstr "Remove Entry"

#: Bookmark.py:99
msgid "Export List"
msgstr "Export List"

#: Bookmark.py:100
msgid "Import List"
msgstr "Import List"

#: Bookmark.py:190
msgid "Title entry is empty."
msgstr "Title entry is empty."

#: Bookmark.py:199
msgid "Web link entry is empty."
msgstr "Web link entry is empty."

#: Bookmark.py:207
msgid "Either the Title or the Weblink already in the table."
msgstr "Either the Title or the Weblink already in the table."

#: Bookmark.py:227
msgid "Bookmark added."
msgstr "Bookmark added."

#: Bookmark.py:244
msgid "This bookmark can not be removed"
msgstr "This bookmark can not be removed"

#: Bookmark.py:275
msgid "Bookmark removed."
msgstr "Bookmark removed."

#: Bookmark.py:290
msgid "Export FlatCAM Bookmarks"
msgstr "Export FlatCAM Bookmarks"

#: Bookmark.py:319 Bookmark.py:349
msgid "Could not load bookmarks file."
msgstr "Could not load bookmarks file."

#: Bookmark.py:329
msgid "Failed to write bookmarks to file."
msgstr "Failed to write bookmarks to file."

#: Bookmark.py:331
msgid "Exported bookmarks to"
msgstr "Exported bookmarks to"

#: Bookmark.py:337
msgid "Import FlatCAM Bookmarks"
msgstr "Import FlatCAM Bookmarks"

#: Bookmark.py:356
msgid "Imported Bookmarks from"
msgstr "Imported Bookmarks from"

#: Common.py:37
msgid "The user requested a graceful exit of the current task."
msgstr "The user requested a graceful exit of the current task."

#: Common.py:250
msgid "Click the end point of the area."
msgstr "Click the end point of the area."

#: Common.py:386
msgid "Exclusion areas added. Checking overlap with the object geometry ..."
msgstr "Exclusion areas added. Checking overlap with the object geometry ..."

#: Common.py:392
msgid "Failed. Exclusion areas intersects the object geometry ..."
msgstr "Failed. Exclusion areas intersects the object geometry ..."

#: Common.py:396
#| msgid "Exclusion areas"
msgid "Exclusion areas added."
msgstr "Exclusion areas added."

#: Common.py:405
#| msgid "Exclusion areas"
msgid "With Exclusion areas."
msgstr "With Exclusion areas."

#: Common.py:435
msgid "Cancelled. Area exclusion drawing was interrupted."
msgstr "Cancelled. Area exclusion drawing was interrupted."

#: Common.py:527 Common.py:575
#| msgid "All objects are selected."
msgid "All exclusion zones deleted."
msgstr "All exclusion zones deleted."

#: Common.py:562
#| msgid "Delete all exclusion areas."
msgid "Selected exclusion zones deleted."
msgstr "Selected exclusion zones deleted."

#: assets/linux/flatcam-beta.desktop:3
msgid "FlatCAM Beta"
msgstr "FlatCAM Beta"

#: assets/linux/flatcam-beta.desktop:8
msgid "G-Code from GERBERS"
msgstr "G-Code from GERBERS"

#: camlib.py:596
msgid "self.solid_geometry is neither BaseGeometry or list."
msgstr "self.solid_geometry is neither BaseGeometry or list."

#: camlib.py:971
msgid "Pass"
msgstr "Pass"

#: camlib.py:991
msgid "Get Exteriors"
msgstr "Get Exteriors"

#: camlib.py:994
msgid "Get Interiors"
msgstr "Get Interiors"

#: camlib.py:2174
msgid "Object was mirrored"
msgstr "Object was mirrored"

#: camlib.py:2176
msgid "Failed to mirror. No object selected"
msgstr "Failed to mirror. No object selected"

#: camlib.py:2241
msgid "Object was rotated"
msgstr "Object was rotated"

#: camlib.py:2243
msgid "Failed to rotate. No object selected"
msgstr "Failed to rotate. No object selected"

#: camlib.py:2309
msgid "Object was skewed"
msgstr "Object was skewed"

#: camlib.py:2311
msgid "Failed to skew. No object selected"
msgstr "Failed to skew. No object selected"

#: camlib.py:2387
msgid "Object was buffered"
msgstr "Object was buffered"

#: camlib.py:2389
msgid "Failed to buffer. No object selected"
msgstr "Failed to buffer. No object selected"

#: camlib.py:2597
msgid "There is no such parameter"
msgstr "There is no such parameter"

#: camlib.py:2657 camlib.py:2898 camlib.py:3127 camlib.py:3349
msgid ""
"The Cut Z parameter has positive value. It is the depth value to drill into "
"material.\n"
"The Cut Z parameter needs to have a negative value, assuming it is a typo "
"therefore the app will convert the value to negative. Check the resulting "
"CNC code (Gcode etc)."
msgstr ""
"The Cut Z parameter has positive value. It is the depth value to drill into "
"material.\n"
"The Cut Z parameter needs to have a negative value, assuming it is a typo "
"therefore the app will convert the value to negative. Check the resulting "
"CNC code (Gcode etc)."

#: camlib.py:2665 camlib.py:2908 camlib.py:3137 camlib.py:3359 camlib.py:3650
#: camlib.py:4045
msgid "The Cut Z parameter is zero. There will be no cut, skipping file"
msgstr "The Cut Z parameter is zero. There will be no cut, skipping file"

#: camlib.py:2680 camlib.py:4013
msgid ""
"The Toolchange X,Y field in Edit -> Preferences has to be in the format (x, "
"y) \n"
"but now there is only one value, not two. "
msgstr ""
"The Toolchange X,Y field in Edit -> Preferences has to be in the format (x, "
"y) \n"
"but now there is only one value, not two. "

#: camlib.py:2693 camlib.py:3597 camlib.py:3991
msgid ""
"The End Move X,Y field in Edit -> Preferences has to be in the format (x, y) "
"but now there is only one value, not two."
msgstr ""
"The End Move X,Y field in Edit -> Preferences has to be in the format (x, y) "
"but now there is only one value, not two."

#: camlib.py:2781
msgid "Creating a list of points to drill..."
msgstr "Creating a list of points to drill..."

#: camlib.py:2871 camlib.py:3748 camlib.py:4149
msgid "Starting G-Code"
msgstr "Starting G-Code"

#: camlib.py:3012 camlib.py:3231 camlib.py:3395 camlib.py:3761 camlib.py:4160
msgid "Starting G-Code for tool with diameter"
msgstr "Starting G-Code for tool with diameter"

#: camlib.py:3095 camlib.py:3313 camlib.py:3481
msgid "G91 coordinates not implemented"
msgstr "G91 coordinates not implemented"

#: camlib.py:3101 camlib.py:3320 camlib.py:3486
msgid "The loaded Excellon file has no drills"
msgstr "The loaded Excellon file has no drills"

#: camlib.py:3509
msgid "Finished G-Code generation..."
msgstr "Finished G-Code generation..."

#: camlib.py:3619
msgid ""
"The Toolchange X,Y field in Edit -> Preferences has to be in the format (x, "
"y) \n"
"but now there is only one value, not two."
msgstr ""
"The Toolchange X,Y field in Edit -> Preferences has to be in the format (x, "
"y) \n"
"but now there is only one value, not two."

#: camlib.py:3633 camlib.py:4028
msgid ""
"Cut_Z parameter is None or zero. Most likely a bad combinations of other "
"parameters."
msgstr ""
"Cut_Z parameter is None or zero. Most likely a bad combinations of other "
"parameters."

#: camlib.py:3642 camlib.py:4037
msgid ""
"The Cut Z parameter has positive value. It is the depth value to cut into "
"material.\n"
"The Cut Z parameter needs to have a negative value, assuming it is a typo "
"therefore the app will convert the value to negative.Check the resulting CNC "
"code (Gcode etc)."
msgstr ""
"The Cut Z parameter has positive value. It is the depth value to cut into "
"material.\n"
"The Cut Z parameter needs to have a negative value, assuming it is a typo "
"therefore the app will convert the value to negative.Check the resulting CNC "
"code (Gcode etc)."

#: camlib.py:3655 camlib.py:4051
msgid "Travel Z parameter is None or zero."
msgstr "Travel Z parameter is None or zero."

#: camlib.py:3660 camlib.py:4056
msgid ""
"The Travel Z parameter has negative value. It is the height value to travel "
"between cuts.\n"
"The Z Travel parameter needs to have a positive value, assuming it is a typo "
"therefore the app will convert the value to positive.Check the resulting CNC "
"code (Gcode etc)."
msgstr ""
"The Travel Z parameter has negative value. It is the height value to travel "
"between cuts.\n"
"The Z Travel parameter needs to have a positive value, assuming it is a typo "
"therefore the app will convert the value to positive.Check the resulting CNC "
"code (Gcode etc)."

#: camlib.py:3668 camlib.py:4064
msgid "The Z Travel parameter is zero. This is dangerous, skipping file"
msgstr "The Z Travel parameter is zero. This is dangerous, skipping file"

#: camlib.py:3687 camlib.py:4087
msgid "Indexing geometry before generating G-Code..."
msgstr "Indexing geometry before generating G-Code..."

#: camlib.py:3831 camlib.py:4229
msgid "Finished G-Code generation"
msgstr "Finished G-Code generation"

#: camlib.py:3831
msgid "paths traced"
msgstr "paths traced"

#: camlib.py:3881
msgid "Expected a Geometry, got"
msgstr "Expected a Geometry, got"

#: camlib.py:3888
msgid ""
"Trying to generate a CNC Job from a Geometry object without solid_geometry."
msgstr ""
"Trying to generate a CNC Job from a Geometry object without solid_geometry."

#: camlib.py:3929
msgid ""
"The Tool Offset value is too negative to use for the current_geometry.\n"
"Raise the value (in module) and try again."
msgstr ""
"The Tool Offset value is too negative to use for the current_geometry.\n"
"Raise the value (in module) and try again."

#: camlib.py:4229
msgid " paths traced."
msgstr " paths traced."

#: camlib.py:4257
msgid "There is no tool data in the SolderPaste geometry."
msgstr "There is no tool data in the SolderPaste geometry."

#: camlib.py:4346
msgid "Finished SolderPaste G-Code generation"
msgstr "Finished SolderPaste G-Code generation"

#: camlib.py:4346
msgid "paths traced."
msgstr "paths traced."

#: camlib.py:4606
msgid "Parsing GCode file. Number of lines"
msgstr "Parsing GCode file. Number of lines"

#: camlib.py:4713
msgid "Creating Geometry from the parsed GCode file. "
msgstr "Creating Geometry from the parsed GCode file. "

#: camlib.py:4856 camlib.py:5079 camlib.py:5190 camlib.py:5346
msgid "G91 coordinates not implemented ..."
msgstr "G91 coordinates not implemented ..."

#: camlib.py:4921
msgid "Unifying Geometry from parsed Geometry segments"
msgstr "Unifying Geometry from parsed Geometry segments"

#: defaults.py:756
msgid "Could not load defaults file."
msgstr "Could not load defaults file."

#: defaults.py:769
msgid "Failed to parse defaults file."
msgstr "Failed to parse defaults file."

#: tclCommands/TclCommandBbox.py:75 tclCommands/TclCommandNregions.py:74
msgid "Expected GerberObject or GeometryObject, got"
msgstr "Expected GerberObject or GeometryObject, got"

#: tclCommands/TclCommandBounds.py:67 tclCommands/TclCommandBounds.py:71
msgid "Expected a list of objects names separated by comma. Got"
msgstr "Expected a list of objects names separated by comma. Got"

#: tclCommands/TclCommandBounds.py:81
msgid "TclCommand Bounds done."
msgstr "TclCommand Bounds done."

#: tclCommands/TclCommandCopperClear.py:281 tclCommands/TclCommandPaint.py:283
#: tclCommands/TclCommandScale.py:81
msgid "Could not retrieve box object"
msgstr "Could not retrieve box object"

#: tclCommands/TclCommandCopperClear.py:304
msgid "Expected either -box <value> or -all."
msgstr "Expected either -box <value> or -all."

#: tclCommands/TclCommandGeoCutout.py:147
msgid ""
"The name of the object for which cutout is done is missing. Add it and retry."
msgstr ""
"The name of the object for which cutout is done is missing. Add it and retry."

#: tclCommands/TclCommandGeoCutout.py:189
msgid "Gaps value can be only one of: 'lr', 'tb', '2lr', '2tb', 4 or 8."
msgstr "Gaps value can be only one of: 'lr', 'tb', '2lr', '2tb', 4 or 8."

#: tclCommands/TclCommandGeoCutout.py:301
#: tclCommands/TclCommandGeoCutout.py:356
msgid "Any-form Cutout operation finished."
msgstr "Any-form Cutout operation finished."

#: tclCommands/TclCommandGeoCutout.py:362
msgid "Cancelled. Object type is not supported."
msgstr "Cancelled. Object type is not supported."

#: tclCommands/TclCommandHelp.py:75
msgid "Available commands:"
msgstr "Available commands:"

#: tclCommands/TclCommandHelp.py:115
msgid "Type help <command_name> for usage."
msgstr "Type help <command_name> for usage."

#: tclCommands/TclCommandHelp.py:115
msgid "Example: help open_gerber"
msgstr "Example: help open_gerber"

#: tclCommands/TclCommandPaint.py:250 tclCommands/TclCommandPaint.py:256
msgid "Expected a tuple value like -single 3.2,0.1."
msgstr "Expected a tuple value like -single 3.2,0.1."

#: tclCommands/TclCommandPaint.py:276
msgid "Expected -box <value>."
msgstr "Expected -box <value>."

#: tclCommands/TclCommandPaint.py:297
msgid ""
"None of the following args: 'box', 'single', 'all' were used.\n"
"Paint failed."
msgstr ""
"None of the following args: 'box', 'single', 'all' were used.\n"
"Paint failed."

#: tclCommands/TclCommandScale.py:106
msgid ""
"Expected -origin <origin> or -origin <min_bounds> or -origin <center> or - "
"origin 3.0,4.2."
msgstr ""
"Expected -origin <origin> or -origin <min_bounds> or -origin <center> or - "
"origin 3.0,4.2."

#: tclCommands/TclCommandScale.py:119
msgid "Expected -x <value> -y <value>."
msgstr "Expected -x <value> -y <value>."

#: tclCommands/TclCommandSetOrigin.py:95
msgid "Expected a pair of (x, y) coordinates. Got"
msgstr "Expected a pair of (x, y) coordinates. Got"

#: tclCommands/TclCommandSetOrigin.py:101
msgid "Origin set by offsetting all loaded objects with "
msgstr "Origin set by offsetting all loaded objects with "

#: tclCommands/TclCommandSubtractRectangle.py:62
msgid "No Geometry name in args. Provide a name and try again."
msgstr "No Geometry name in args. Provide a name and try again."

#~ msgid "./assets/icon.png"
#~ msgstr "./assets/icon.png"

#~ msgid "New Blank Geometry"
#~ msgstr "New Blank Geometry"

#~ msgid "New Blank Gerber"
#~ msgstr "New Blank Gerber"

#~ msgid "New Blank Excellon"
#~ msgstr "New Blank Excellon"

#~ msgid ""
#~ "Relative measurement.\n"
#~ "Reference is last click position"
#~ msgstr ""
#~ "Relative measurement.\n"
#~ "Reference is last click position"

#~| msgid "Clearance"
#~ msgid "Clear areas"
#~ msgstr "Clear areas"

#~ msgid "Apply Theme"
#~ msgstr "Apply Theme"

#~ msgid ""
#~ "Select a theme for FlatCAM.\n"
#~ "It will theme the plot area.\n"
#~ "The application will restart after change."
#~ msgstr ""
#~ "Select a theme for FlatCAM.\n"
#~ "It will theme the plot area.\n"
#~ "The application will restart after change."

#~ msgid "Film Object"
#~ msgstr "Film Object"

#~ msgid "Object for which to create the film."
#~ msgstr "Object for which to create the film."

#~ msgid "Box Object"
#~ msgstr "Box Object"

#~ msgid ""
#~ "The actual object that is used as container for the\n"
#~ " selected object for which we create the film.\n"
#~ "Usually it is the PCB outline but it can be also the\n"
#~ "same object for which the film is created."
#~ msgstr ""
#~ "The actual object that is used as container for the\n"
#~ " selected object for which we create the film.\n"
#~ "Usually it is the PCB outline but it can be also the\n"
#~ "same object for which the film is created."

#~ msgid "Expected -x <value> and -y <value>."
#~ msgstr "Expected -x <value> and -y <value>."

#~ msgid "Could not load factory defaults file."
#~ msgstr "Could not load factory defaults file."

#~ msgid "Failed to parse factory defaults file."
#~ msgstr "Failed to parse factory defaults file."

#~ msgid "Could not load preferences file."
#~ msgstr "Could not load preferences file."

#~ msgid "Failed to write factory defaults to file."
#~ msgstr "Failed to write factory defaults to file."

#~ msgid "Factory defaults saved."
#~ msgstr "Factory defaults saved."

#~ msgid ""
#~ "The Tool Type (TT) can be:<BR>- <B>Circular</B> with 1 ... 4 teeth -> it "
#~ "is informative only. Being circular, <BR>the cut width in material is "
#~ "exactly the tool diameter.<BR>- <B>Ball</B> -> informative only and make "
#~ "reference to the Ball type endmill.<BR>- <B>V-Shape</B> -> it will "
#~ "disable de Z-Cut parameter in the resulting geometry UI form and enable "
#~ "two additional UI form fields in the resulting geometry: V-Tip Dia and V-"
#~ "Tip Angle. Adjusting those two values will adjust the Z-Cut parameter "
#~ "such as the cut width into material will be equal with the value in the "
#~ "Tool Diameter column of this table.<BR>Choosing the <B>V-Shape</B> Tool "
#~ "Type automatically will select the Operation Type in the resulting "
#~ "geometry as Isolation."
#~ msgstr ""
#~ "The Tool Type (TT) can be:<BR>- <B>Circular</B> with 1 ... 4 teeth -> it "
#~ "is informative only. Being circular, <BR>the cut width in material is "
#~ "exactly the tool diameter.<BR>- <B>Ball</B> -> informative only and make "
#~ "reference to the Ball type endmill.<BR>- <B>V-Shape</B> -> it will "
#~ "disable de Z-Cut parameter in the resulting geometry UI form and enable "
#~ "two additional UI form fields in the resulting geometry: V-Tip Dia and V-"
#~ "Tip Angle. Adjusting those two values will adjust the Z-Cut parameter "
#~ "such as the cut width into material will be equal with the value in the "
#~ "Tool Diameter column of this table.<BR>Choosing the <B>V-Shape</B> Tool "
#~ "Type automatically will select the Operation Type in the resulting "
#~ "geometry as Isolation."

#~ msgid "e_fr_probe"
#~ msgstr "e_fr_probe"

#~ msgid ""
#~ " Could not generate punched hole Gerber because the punch hole sizeis "
#~ "bigger than some of the apertures in the Gerber object."
#~ msgstr ""
#~ " Could not generate punched hole Gerber because the punch hole sizeis "
#~ "bigger than some of the apertures in the Gerber object."

#~ msgid "Paint Tool. Normal painting all task started."
#~ msgstr "Paint Tool. Normal painting all task started."

#~ msgid "Rest machining painting all task started."
#~ msgstr "Rest machining painting all task started."

#~| msgid "Painting polygon at location"
#~ msgid "Painting polygons with method: lines."
#~ msgstr "Painting polygons with method: lines."

#~| msgid "Normal painting polygon task started."
#~ msgid "Failed. Painting polygons with method: seed."
#~ msgstr "Failed. Painting polygons with method: seed."

#~| msgid "Normal painting polygon task started."
#~ msgid "Failed. Painting polygons with method: standard."
#~ msgstr "Failed. Painting polygons with method: standard."

#~ msgid ""
#~ "Could not do Paint All. Try a different combination of parameters. Or a "
#~ "different Method of paint"
#~ msgstr ""
#~ "Could not do Paint All. Try a different combination of parameters. Or a "
#~ "different Method of paint"

#~| msgid "Paint Tool. Normal painting all task started."
#~ msgid "Paint Tool. Normal painting area task started."
#~ msgstr "Paint Tool. Normal painting area task started."

#~ msgid "Rest machining painting area task started."
#~ msgstr "Rest machining painting area task started."

#~ msgid "Executing Tcl Script ..."
#~ msgstr "Executing Tcl Script ..."

#~ msgid "Open cancelled."
#~ msgstr "Open cancelled."

#~ msgid "Preferences default restore was cancelled."
#~ msgstr "Preferences default restore was cancelled."

#~ msgid "FlatCAM preferences import cancelled."
#~ msgstr "FlatCAM preferences import cancelled."

#~ msgid "FlatCAM preferences export cancelled."
#~ msgstr "FlatCAM preferences export cancelled."

#~ msgid "Multigeo. Geometry merging finished"
#~ msgstr "Multigeo. Geometry merging finished"

#~ msgid "Units conversion cancelled."
#~ msgstr "Units conversion cancelled."

#~ msgid "Open Gerber cancelled."
#~ msgstr "Open Gerber cancelled."

#~ msgid " Open Excellon cancelled."
#~ msgstr " Open Excellon cancelled."

#~ msgid "Open G-Code cancelled."
#~ msgstr "Open G-Code cancelled."

#~ msgid "Open Project cancelled."
#~ msgstr "Open Project cancelled."

#~ msgid "Open HPGL2 file cancelled."
#~ msgstr "Open HPGL2 file cancelled."

#~ msgid "Open Config cancelled."
#~ msgstr "Open Config cancelled."

#~ msgid " Export SVG cancelled."
#~ msgstr " Export SVG cancelled."

#~ msgid "Export PNG cancelled."
#~ msgstr "Export PNG cancelled."

#~ msgid "No object selected. Please select an Gerber object to export."
#~ msgstr "No object selected. Please select an Gerber object to export."

#~ msgid "Save Gerber source file cancelled."
#~ msgstr "Save Gerber source file cancelled."

#~ msgid "No object selected. Please select an Script object to export."
#~ msgstr "No object selected. Please select an Script object to export."

#~ msgid "Save Script source file cancelled."
#~ msgstr "Save Script source file cancelled."

#~ msgid "No object selected. Please select an Document object to export."
#~ msgstr "No object selected. Please select an Document object to export."

#~ msgid "Save Document source file cancelled."
#~ msgstr "Save Document source file cancelled."

#~ msgid "No object selected. Please select an Excellon object to export."
#~ msgstr "No object selected. Please select an Excellon object to export."

#~ msgid "Saving Excellon source file cancelled."
#~ msgstr "Saving Excellon source file cancelled."

#~ msgid "No object selected. Please Select an Excellon object to export."
#~ msgstr "No object selected. Please Select an Excellon object to export."

#~ msgid "Export Excellon cancelled."
#~ msgstr "Export Excellon cancelled."

#~ msgid "No object selected. Please Select an Gerber object to export."
#~ msgstr "No object selected. Please Select an Gerber object to export."

#~ msgid "Export Gerber cancelled."
#~ msgstr "Export Gerber cancelled."

#~ msgid "Export DXF cancelled."
#~ msgstr "Export DXF cancelled."

#~ msgid "Open SVG cancelled."
#~ msgstr "Open SVG cancelled."

#~ msgid "Open DXF cancelled."
#~ msgstr "Open DXF cancelled."

#~ msgid "Open TCL script cancelled."
#~ msgstr "Open TCL script cancelled."

#~ msgid "Run TCL script cancelled."
#~ msgstr "Run TCL script cancelled."

#~ msgid "Save Project cancelled."
#~ msgstr "Save Project cancelled."

#~ msgid "Save Object PDF cancelled."
#~ msgstr "Save Object PDF cancelled."

#~ msgid "Shows list of commands."
#~ msgstr "Shows list of commands."

#~ msgid "FlatCAM bookmarks export cancelled."
#~ msgstr "FlatCAM bookmarks export cancelled."

#~ msgid "FlatCAM bookmarks import cancelled."
#~ msgstr "FlatCAM bookmarks import cancelled."

#~ msgid "FlatCAM Tools DB export cancelled."
#~ msgstr "FlatCAM Tools DB export cancelled."

#~ msgid "FlatCAM Tools DB import cancelled."
#~ msgstr "FlatCAM Tools DB import cancelled."

#~ msgid ""
#~ "Wrong value format for self.defaults[\"z_pdepth\"] or self."
#~ "options[\"z_pdepth\"]"
#~ msgstr ""
#~ "Wrong value format for self.defaults[\"z_pdepth\"] or self."
#~ "options[\"z_pdepth\"]"

#~ msgid ""
#~ "Wrong value format for self.defaults[\"feedrate_probe\"] or self."
#~ "options[\"feedrate_probe\"]"
#~ msgstr ""
#~ "Wrong value format for self.defaults[\"feedrate_probe\"] or self."
#~ "options[\"feedrate_probe\"]"

#~ msgid "Starting G-Code..."
#~ msgstr "Starting G-Code..."

#~ msgid ""
#~ "Algorithm to paint the polygon:<BR><B>Standard</B>: Fixed step inwards."
#~ "<BR><B>Seed-based</B>: Outwards from seed."
#~ msgstr ""
#~ "Algorithm to paint the polygon:<BR><B>Standard</B>: Fixed step inwards."
#~ "<BR><B>Seed-based</B>: Outwards from seed."

#~ msgid "Seed-based"
#~ msgstr "Seed-based"

#~ msgid "Straight lines"
#~ msgstr "Straight lines"

#~ msgid "Paint cancelled. No shape selected."
#~ msgstr "Paint cancelled. No shape selected."

#~ msgid "Transformation cancelled. No shape selected."
#~ msgstr "Transformation cancelled. No shape selected."

#~ msgid "Buffer cancelled. No shape selected."
#~ msgstr "Buffer cancelled. No shape selected."

#~ msgid "Export Code cancelled."
#~ msgstr "Export Code cancelled."

#~ msgid "&Save Project ..."
#~ msgstr "&Save Project ..."

#~ msgid "Save Project C&opy ..."
#~ msgstr "Save Project C&opy ..."

#~ msgid "Change the size of the object."
#~ msgstr "Change the size of the object."

#~ msgid "Change the position of this object."
#~ msgstr "Change the position of this object."

#~ msgid "Vector"
#~ msgstr "Vector"

#~ msgid ""
#~ "Create a CNC Job object\n"
#~ "for this drill object."
#~ msgstr ""
#~ "Create a CNC Job object\n"
#~ "for this drill object."

#~ msgid ""
#~ "Choose what to use for GCode generation:\n"
#~ "'Drills', 'Slots' or 'Both'.\n"
#~ "When choosing 'Slots' or 'Both', slots will be\n"
#~ "converted to a series of drills."
#~ msgstr ""
#~ "Choose what to use for GCode generation:\n"
#~ "'Drills', 'Slots' or 'Both'.\n"
#~ "When choosing 'Slots' or 'Both', slots will be\n"
#~ "converted to a series of drills."

#~ msgid "Generate the CNC Job."
#~ msgstr "Generate the CNC Job."

#~ msgid "Add Tool from DataBase"
#~ msgstr "Add Tool from DataBase"

#~ msgid "Select a theme for FlatCAM."
#~ msgstr "Select a theme for FlatCAM."

#~ msgid "Conv."
#~ msgstr "Conv."

#~ msgid "Diameters of the cutting tools, separated by ','"
#~ msgstr "Diameters of the cutting tools, separated by ','"

#~ msgid "Tools dia"
#~ msgstr "Tools dia"

#~ msgid "The new tool diameter (cut width) to add in the tool table."
#~ msgstr "The new tool diameter (cut width) to add in the tool table."

#~ msgid ""
#~ "Algorithm for non-copper clearing:<BR><B>Standard</B>: Fixed step inwards."
#~ "<BR><B>Seed-based</B>: Outwards from seed.<BR><B>Line-based</B>: Parallel "
#~ "lines."
#~ msgstr ""
#~ "Algorithm for non-copper clearing:<BR><B>Standard</B>: Fixed step inwards."
#~ "<BR><B>Seed-based</B>: Outwards from seed.<BR><B>Line-based</B>: Parallel "
#~ "lines."

#~ msgid "Area"
#~ msgstr "Area"

#~ msgid "Ref"
#~ msgstr "Ref"

#~ msgid ""
#~ "- 'Itself' -  the non copper clearing extent\n"
#~ "is based on the object that is copper cleared.\n"
#~ "- 'Area Selection' - left mouse click to start selection of the area to "
#~ "be painted.\n"
#~ "Keeping a modifier key pressed (CTRL or SHIFT) will allow to add multiple "
#~ "areas.\n"
#~ "- 'Reference Object' -  will do non copper clearing within the area\n"
#~ "specified by another object."
#~ msgstr ""
#~ "- 'Itself' -  the non copper clearing extent\n"
#~ "is based on the object that is copper cleared.\n"
#~ "- 'Area Selection' - left mouse click to start selection of the area to "
#~ "be painted.\n"
#~ "Keeping a modifier key pressed (CTRL or SHIFT) will allow to add multiple "
#~ "areas.\n"
#~ "- 'Reference Object' -  will do non copper clearing within the area\n"
#~ "specified by another object."

#~ msgid "Sel"
#~ msgstr "Sel"

#~ msgid "Diameters of nozzle tools, separated by ','"
#~ msgstr "Diameters of nozzle tools, separated by ','"

#~ msgid "Reference Gerber"
#~ msgstr "Reference Gerber"

#~ msgid "Reference Excellon"
#~ msgstr "Reference Excellon"

#~ msgid "Reference Geometry"
#~ msgstr "Reference Geometry"

#~ msgid "Point/Box Reference"
#~ msgstr "Point/Box Reference"

#~ msgid ""
#~ "If 'Point' is selected above it store the coordinates (x, y) through "
#~ "which\n"
#~ "the mirroring axis passes.\n"
#~ "If 'Box' is selected above, select here a FlatCAM object (Gerber, Exc or "
#~ "Geo).\n"
#~ "Through the center of this object pass the mirroring axis selected above."
#~ msgstr ""
#~ "If 'Point' is selected above it store the coordinates (x, y) through "
#~ "which\n"
#~ "the mirroring axis passes.\n"
#~ "If 'Box' is selected above, select here a FlatCAM object (Gerber, Exc or "
#~ "Geo).\n"
#~ "Through the center of this object pass the mirroring axis selected above."

#~ msgid "Alignment Drill Diameter"
#~ msgstr "Alignment Drill Diameter"

#~ msgid ""
#~ "'Point' coordinates missing. Using Origin (0, 0) as mirroring reference."
#~ msgstr ""
#~ "'Point' coordinates missing. Using Origin (0, 0) as mirroring reference."

#~ msgid "Export positive film cancelled."
#~ msgstr "Export positive film cancelled."

#~ msgid "Export negative film cancelled."
#~ msgstr "Export negative film cancelled."

#~ msgid "Move action cancelled."
#~ msgstr "Move action cancelled."

#~ msgid "Diameter for the new tool."
#~ msgstr "Diameter for the new tool."

#~ msgid "Create Paint Geometry"
#~ msgstr "Create Paint Geometry"

#~ msgid "Paint Tool. Reading parameters."
#~ msgstr "Paint Tool. Reading parameters."

#~ msgid "Paint Tool. Rest machining painting area task started."
#~ msgstr "Paint Tool. Rest machining painting area task started."

#~ msgid "Properties Tool was not displayed. No object selected."
#~ msgstr "Properties Tool was not displayed. No object selected."

#~ msgid " Export PNG cancelled."
#~ msgstr " Export PNG cancelled."

#~ msgid "Adding Nozzle tool cancelled. Tool already in Tool Table."
#~ msgstr "Adding Nozzle tool cancelled. Tool already in Tool Table."

#~ msgid ""
#~ "None of the following args: 'ref', 'all' were found or none was set to "
#~ "1.\n"
#~ "Copper clearing failed."
#~ msgstr ""
#~ "None of the following args: 'ref', 'all' were found or none was set to "
#~ "1.\n"
#~ "Copper clearing failed."

#~ msgid "PostProcessor"
#~ msgstr "PostProcessor"

#~ msgid "Default <b>Zeros</b>"
#~ msgstr "Default <b>Zeros</b>"

#~ msgid ""
#~ "This sets the default type of Excellon zeros.\n"
#~ "If it is not detected in the parsed file the value here\n"
#~ "will be used.If LZ then Leading Zeros are kept and\n"
#~ "Trailing Zeros are removed.\n"
#~ "If TZ is checked then Trailing Zeros are kept\n"
#~ "and Leading Zeros are removed."
#~ msgstr ""
#~ "This sets the default type of Excellon zeros.\n"
#~ "If it is not detected in the parsed file the value here\n"
#~ "will be used.If LZ then Leading Zeros are kept and\n"
#~ "Trailing Zeros are removed.\n"
#~ "If TZ is checked then Trailing Zeros are kept\n"
#~ "and Leading Zeros are removed."

#~ msgid "Default <b>Units</b>"
#~ msgstr "Default <b>Units</b>"

#~ msgid "Optimization Time"
#~ msgstr "Optimization Time"

#~ msgid "Coordinates decimals"
#~ msgstr "Coordinates decimals"

#~ msgid "Feedrate decimals"
#~ msgstr "Feedrate decimals"

#~ msgid "Rest M."
#~ msgstr "Rest M."

#~ msgid "Convex Sh."
#~ msgstr "Convex Sh."

#~ msgid "Add Tool to Tools DB"
#~ msgstr "Add Tool to Tools DB"

#~ msgid "Remove Tool from Tools DB"
#~ msgstr "Remove Tool from Tools DB"

#~ msgid "Export Tool DB"
#~ msgstr "Export Tool DB"

#~ msgid "Import Tool DB"
#~ msgstr "Import Tool DB"

#~ msgid "Please enter the desired tool diameter in Float format."
#~ msgstr "Please enter the desired tool diameter in Float format."

#~ msgid "Default Tool added. Wrong value format entered."
#~ msgstr "Default Tool added. Wrong value format entered."

#~ msgid "Import Preferences"
#~ msgstr "Import Preferences"

#~ msgid ""
#~ "Import a full set of FlatCAM settings from a file\n"
#~ "previously saved on HDD.\n"
#~ "\n"
#~ "FlatCAM automatically save a 'factory_defaults' file\n"
#~ "on the first start. Do not delete that file."
#~ msgstr ""
#~ "Import a full set of FlatCAM settings from a file\n"
#~ "previously saved on HDD.\n"
#~ "\n"
#~ "FlatCAM automatically save a 'factory_defaults' file\n"
#~ "on the first start. Do not delete that file."

#~ msgid "Export Preferences"
#~ msgstr "Export Preferences"

#~ msgid ""
#~ "Export a full set of FlatCAM settings in a file\n"
#~ "that is saved on HDD."
#~ msgstr ""
#~ "Export a full set of FlatCAM settings in a file\n"
#~ "that is saved on HDD."

#~ msgid "Start move Z"
#~ msgstr "Start move Z"

#~ msgid "Grid X value"
#~ msgstr "Grid X value"

#~ msgid "Grid Y value"
#~ msgstr "Grid Y value"

#~ msgid "Wk. size"
#~ msgstr "Wk. size"

#~ msgid "Sel. Fill"
#~ msgstr "Sel. Fill"

#~ msgid "Sel. Line"
#~ msgstr "Sel. Line"

#~ msgid "Sel2. Fill"
#~ msgstr "Sel2. Fill"

#~ msgid "Sel2. Line"
#~ msgstr "Sel2. Line"

#~ msgid "Editor Draw Sel."
#~ msgstr "Editor Draw Sel."

#~ msgid "Proj. Dis. Items"
#~ msgstr "Proj. Dis. Items"

#~ msgid "Sel. Shape"
#~ msgstr "Sel. Shape"

#~ msgid "NB Font Size"
#~ msgstr "NB Font Size"

#~ msgid "Axis Font Size"
#~ msgstr "Axis Font Size"

#~ msgid "Textbox Font Size"
#~ msgstr "Textbox Font Size"

#~ msgid "Shell at StartUp"
#~ msgstr "Shell at StartUp"

#~ msgid "Project at StartUp"
#~ msgstr "Project at StartUp"

#~ msgid "Mouse Cursor"
#~ msgstr "Mouse Cursor"

#~ msgid ""
#~ "Set the language used throughout FlatCAM.\n"
#~ "The app will restart after click.Windows: When FlatCAM is installed in "
#~ "Program Files\n"
#~ "directory, it is possible that the app will not\n"
#~ "restart after the button is clicked due of Windows\n"
#~ "security features. In this case the language will be\n"
#~ "applied at the next app start."
#~ msgstr ""
#~ "Set the language used throughout FlatCAM.\n"
#~ "The app will restart after click.Windows: When FlatCAM is installed in "
#~ "Program Files\n"
#~ "directory, it is possible that the app will not\n"
#~ "restart after the button is clicked due of Windows\n"
#~ "security features. In this case the language will be\n"
#~ "applied at the next app start."

#~ msgid "G-code does not have a units code: either G20 or G21"
#~ msgstr "G-code does not have a units code: either G20 or G21"

#, python-brace-format
#~ msgid ""
#~ "[selected] {kind} created/selected: <span style=\"color:{color};\">{name}"
#~ "</span>"
#~ msgstr ""
#~ "[selected] {kind} created/selected: <span style=\"color:{color};\">{name}"
#~ "</span>"

#, python-brace-format
#~ msgid "[selected]<span style=\"color:{color};\">{name}</span> selected"
#~ msgstr "[selected]<span style=\"color:{color};\">{name}</span> selected"

#, python-brace-format
#~ msgid "{l_save}/Project_{date}"
#~ msgstr "{l_save}/Project_{date}"

#, python-brace-format
#~| msgid "{l_save}/Project_{date}"
#~ msgid "{l_save}/{obj_name}_{date}"
#~ msgstr "{l_save}/{obj_name}_{date}"

#, python-format
#~ msgid ""
#~ "How much (fraction) of the tool width to overlap each tool pass.\n"
#~ "Example:\n"
#~ "A value here of 0.25 means 25%% from the tool diameter found above.\n"
#~ "\n"
#~ "Adjust the value starting with lower values\n"
#~ "and increasing it if areas that should be painted are still \n"
#~ "not painted.\n"
#~ "Lower values = faster processing, faster execution on CNC.\n"
#~ "Higher values = slow processing and slow execution on CNC\n"
#~ "due of too many paths."
#~ msgstr ""
#~ "How much (fraction) of the tool width to overlap each tool pass.\n"
#~ "Example:\n"
#~ "A value here of 0.25 means 25%% from the tool diameter found above.\n"
#~ "\n"
#~ "Adjust the value starting with lower values\n"
#~ "and increasing it if areas that should be painted are still \n"
#~ "not painted.\n"
#~ "Lower values = faster processing, faster execution on CNC.\n"
#~ "Higher values = slow processing and slow execution on CNC\n"
#~ "due of too many paths."

#~ msgid ""
#~ "Type here any G-Code commands you would like to append to the generated "
#~ "file. I.e.: M2 (End of program)"
#~ msgstr ""
#~ "Type here any G-Code commands you would like to append to the generated "
#~ "file. I.e.: M2 (End of program)"

#~ msgid ""
#~ "Can be:\n"
#~ "- Portrait\n"
#~ "- Lanscape"
#~ msgstr ""
#~ "Can be:\n"
#~ "- Portrait\n"
#~ "- Lanscape"

#~ msgid ""
#~ "- 'Rectangular' - the bounding box will be of rectangular shape.\n"
#~ " - 'Minimal' - the bounding box will be the convex hull shape."
#~ msgstr ""
#~ "- 'Rectangular' - the bounding box will be of rectangular shape.\n"
#~ " - 'Minimal' - the bounding box will be the convex hull shape."

#~ msgid ""
#~ "- 'Solid' - copper thieving will be a solid polygon.\n"
#~ " - 'Dots Grid' - the empty area will be filled with a pattern of dots.\n"
#~ "- 'Squares Grid' - the empty area will be filled with a pattern of "
#~ "squares.\n"
#~ "- 'Lines Grid' - the empty area will be filled with a pattern of lines."
#~ msgstr ""
#~ "- 'Solid' - copper thieving will be a solid polygon.\n"
#~ " - 'Dots Grid' - the empty area will be filled with a pattern of dots.\n"
#~ "- 'Squares Grid' - the empty area will be filled with a pattern of "
#~ "squares.\n"
#~ "- 'Lines Grid' - the empty area will be filled with a pattern of lines."

#~ msgid "Calibrate Tool"
#~ msgstr "Calibrate Tool"

#, python-brace-format
#~ msgid "MEASURING: Result D(x) = {d_x} | D(y) = {d_y} | Distance = {d_z}"
#~ msgstr "MEASURING: Result D(x) = {d_x} | D(y) = {d_y} | Distance = {d_z}"

#~ msgid "Paint Area"
#~ msgstr "Paint Area"

#~ msgid ""
#~ "Generate GCode file to locate and align the PCB by using\n"
#~ "the four points acquired above."
#~ msgstr ""
#~ "Generate GCode file to locate and align the PCB by using\n"
#~ "the four points acquired above."

#~ msgid "Axis Ref:"
#~ msgstr "Axis Ref:"

#~ msgid "Change project units ..."
#~ msgstr "Change project units ..."

#~ msgid "Tool diameter value is missing or wrong format. Add it and retry."
#~ msgstr "Tool diameter value is missing or wrong format. Add it and retry."

#~ msgid "Overlap value is missing or wrong format. Add it and retry."
#~ msgstr "Overlap value is missing or wrong format. Add it and retry."

#~ msgid "Margin distance value is missing or wrong format. Add it and retry."
#~ msgstr "Margin distance value is missing or wrong format. Add it and retry."

#, python-format
#~ msgid ""
#~ "How much (fraction) of the tool width to overlap each tool pass.\n"
#~ "Example:\n"
#~ "A value here of 0.25 means an overlap of 25%% from the tool diameter "
#~ "found above."
#~ msgstr ""
#~ "How much (fraction) of the tool width to overlap each tool pass.\n"
#~ "Example:\n"
#~ "A value here of 0.25 means an overlap of 25%% from the tool diameter "
#~ "found above."

#~ msgid "Feed Rate X-Y"
#~ msgstr "Feed Rate X-Y"

#~ msgid "Feed Rate Z"
#~ msgstr "Feed Rate Z"

#~ msgid "Feed Rate Rapids"
#~ msgstr "Feed Rate Rapids"

#~ msgid "Generate"
#~ msgstr "Generate"

#~| msgid "STEP 1"
#~ msgid "STEP 5"
#~ msgstr "STEP 5"

#~| msgid "Calc. Tool"
#~ msgid "Cal Exc Tool"
#~ msgstr "Cal Exc Tool"

#~ msgid "Object to be cutout.                        "
#~ msgstr "Object to be cutout.                        "

#~ msgid "Margin:"
#~ msgstr "Margin:"

#~ msgid "Gap size:"
#~ msgstr "Gap size:"

#~ msgid ""
#~ "The cutout shape can be of ny shape.\n"
#~ "Useful when the PCB has a non-rectangular shape."
#~ msgstr ""
#~ "The cutout shape can be of ny shape.\n"
#~ "Useful when the PCB has a non-rectangular shape."

#~ msgid ""
#~ "The resulting cutout shape is\n"
#~ "always a rectangle shape and it will be\n"
#~ "the bounding box of the Object."
#~ msgstr ""
#~ "The resulting cutout shape is\n"
#~ "always a rectangle shape and it will be\n"
#~ "the bounding box of the Object."

#~ msgid "Geo Obj"
#~ msgstr "Geo Obj"

#~ msgid "Manual Geo"
#~ msgstr "Manual Geo"

#~ msgid ""
#~ "Use the left mouse button (LMB) click\n"
#~ "to create a bridge gap to separate the PCB from\n"
#~ "the surrounding material."
#~ msgstr ""
#~ "Use the left mouse button (LMB) click\n"
#~ "to create a bridge gap to separate the PCB from\n"
#~ "the surrounding material."

#~ msgid "Generate Gap"
#~ msgstr "Generate Gap"

#~ msgid "Reset"
#~ msgstr "Reset"

#~ msgid "Resets all the fields."
#~ msgstr "Resets all the fields."

#~ msgid "Overlap value must be between 0 (inclusive) and 1 (exclusive), "
#~ msgstr "Overlap value must be between 0 (inclusive) and 1 (exclusive), "

#~ msgid "Overlap value must be between 0 (inclusive) and 1 (exclusive)"
#~ msgstr "Overlap value must be between 0 (inclusive) and 1 (exclusive)"

#~ msgid "Click inside the desired polygon."
#~ msgstr "Click inside the desired polygon."

#~ msgid ""
#~ "#\n"
#~ "# CREATE A NEW FLATCAM TCL SCRIPT\n"
#~ "# TCL Tutorial here: https://www.tcl.tk/man/tcl8.5/tutorial/tcltutorial."
#~ "html\n"
#~ "#\n"
#~ "\n"
#~ "# FlatCAM commands list:\n"
#~ "# AddCircle, AddPolygon, AddPolyline, AddRectangle, AlignDrill, "
#~ "AlignDrillGrid, ClearShell, ClearCopper,\n"
#~ "# Cncjob, Cutout, Delete, Drillcncjob, ExportGcode, ExportSVG, Exteriors, "
#~ "GeoCutout, GeoUnion, GetNames,\n"
#~ "# GetSys, ImportSvg, Interiors, Isolate, Follow, JoinExcellon, "
#~ "JoinGeometry, ListSys, MillDrills,\n"
#~ "# MillSlots, Mirror, New, NewGeometry, Offset, OpenExcellon, OpenGCode, "
#~ "OpenGerber, OpenProject,\n"
#~ "# Options, Paint, Panelize, Plot, SaveProject, SaveSys, Scale, SetActive, "
#~ "SetSys, Skew, SubtractPoly,\n"
#~ "# SubtractRectangle, Version, WriteGCode\n"
#~ "#\n"
#~ "\n"
#~ msgstr ""
#~ "#\n"
#~ "# CREATE A NEW FLATCAM TCL SCRIPT\n"
#~ "# TCL Tutorial here: https://www.tcl.tk/man/tcl8.5/tutorial/tcltutorial."
#~ "html\n"
#~ "#\n"
#~ "\n"
#~ "# FlatCAM commands list:\n"
#~ "# AddCircle, AddPolygon, AddPolyline, AddRectangle, AlignDrill, "
#~ "AlignDrillGrid, ClearShell, ClearCopper,\n"
#~ "# Cncjob, Cutout, Delete, Drillcncjob, ExportGcode, ExportSVG, Exteriors, "
#~ "GeoCutout, GeoUnion, GetNames,\n"
#~ "# GetSys, ImportSvg, Interiors, Isolate, Follow, JoinExcellon, "
#~ "JoinGeometry, ListSys, MillDrills,\n"
#~ "# MillSlots, Mirror, New, NewGeometry, Offset, OpenExcellon, OpenGCode, "
#~ "OpenGerber, OpenProject,\n"
#~ "# Options, Paint, Panelize, Plot, SaveProject, SaveSys, Scale, SetActive, "
#~ "SetSys, Skew, SubtractPoly,\n"
#~ "# SubtractRectangle, Version, WriteGCode\n"
#~ "#\n"
#~ "\n"

#~ msgid "Export G-Code ..."
#~ msgstr "Export G-Code ..."

#~ msgid "&View"
#~ msgstr "&View"

#~ msgid "&Tool"
#~ msgstr "&Tool"

#~ msgid "APP.  DEFAULTS"
#~ msgstr "APP.  DEFAULTS"

#~ msgid "PROJ. OPTIONS "
#~ msgstr "PROJ. OPTIONS "

#~ msgid "FULL Geo"
#~ msgstr "FULL Geo"

#~ msgid ""
#~ "Create the Geometry Object\n"
#~ "for isolation routing. It contains both\n"
#~ "the interiors and exteriors geometry."
#~ msgstr ""
#~ "Create the Geometry Object\n"
#~ "for isolation routing. It contains both\n"
#~ "the interiors and exteriors geometry."

#~ msgid "Ext Geo"
#~ msgstr "Ext Geo"

#~ msgid ""
#~ "Create the Geometry Object\n"
#~ "for isolation routing containing\n"
#~ "only the exteriors geometry."
#~ msgstr ""
#~ "Create the Geometry Object\n"
#~ "for isolation routing containing\n"
#~ "only the exteriors geometry."

#~ msgid "Int Geo"
#~ msgstr "Int Geo"

#~ msgid ""
#~ "Create the Geometry Object\n"
#~ "for isolation routing containing\n"
#~ "only the interiors geometry."
#~ msgstr ""
#~ "Create the Geometry Object\n"
#~ "for isolation routing containing\n"
#~ "only the interiors geometry."

#~ msgid ""
#~ "Select from the Tools Table above\n"
#~ "the hole dias that are to be drilled.\n"
#~ "Use the # column to make the selection."
#~ msgstr ""
#~ "Select from the Tools Table above\n"
#~ "the hole dias that are to be drilled.\n"
#~ "Use the # column to make the selection."

#~ msgid "Wk. format"
#~ msgstr "Wk. format"

#~ msgid "y_toolchange = Y coord for Toolchange"
#~ msgstr "y_toolchange = Y coord for Toolchange"

#~ msgid "Ref."
#~ msgstr "Ref."

#~ msgid "Gerber   Reference Box Object"
#~ msgstr "Gerber   Reference Box Object"

#~ msgid "Excellon Reference Box Object"
#~ msgstr "Excellon Reference Box Object"

#~ msgid "Geometry Reference Box Object"
#~ msgstr "Geometry Reference Box Object"

#~ msgid "{l_save}/FlatCAM_Bookmarks_{date}"
#~ msgstr "{l_save}/FlatCAM_Bookmarks_{date}"

#~ msgid "Could not load bookamrks file."
#~ msgstr "Could not load bookamrks file."

#~ msgid "&Help"
#~ msgstr "&Help"

#~ msgid "FlatCAM.org"
#~ msgstr "FlatCAM.org"

#~ msgid "tool = tool number"
#~ msgstr "tool = tool number"

#~ msgid "tooldia = tool diameter"
#~ msgstr "tooldia = tool diameter"

#~ msgid "t_drills = for Excellon, total number of drills"
#~ msgstr "t_drills = for Excellon, total number of drills"

#~ msgid "x_toolchange = X coord for Toolchange"
#~ msgstr "x_toolchange = X coord for Toolchange"

#~ msgid "z_toolchange = Z coord for Toolchange"
#~ msgstr "z_toolchange = Z coord for Toolchange"

#~ msgid "z_depthpercut = the step value for multidepth cut"
#~ msgstr "z_depthpercut = the step value for multidepth cut"

#~ msgid "spindlesspeed = the value for the spindle speed"
#~ msgstr "spindlesspeed = the value for the spindle speed"

#~ msgid "Rotate Angle"
#~ msgstr "Rotate Angle"

#~ msgid "Skew_X angle"
#~ msgstr "Skew_X angle"

#~ msgid "Skew_Y angle"
#~ msgstr "Skew_Y angle"

#~ msgid "Scale_X factor"
#~ msgstr "Scale_X factor"

#~ msgid "Scale_Y factor"
#~ msgstr "Scale_Y factor"

#~ msgid "Offset_X val"
#~ msgstr "Offset_X val"

#~ msgid "Offset_Y val"
#~ msgstr "Offset_Y val"

#~ msgid " Mirror Ref. Point"
#~ msgstr " Mirror Ref. Point"

#~ msgid "The Gerber Copper Bottom file for which rules are checked."
#~ msgstr "The Gerber Copper Bottom file for which rules are checked."

#~ msgid "The Gerber Silkscreen Bottom file for which rules are checked."
#~ msgstr "The Gerber Silkscreen Bottom file for which rules are checked."

#~| msgid "Excellon file"
#~ msgid "Excellon Files"
#~ msgstr "Excellon Files"

#~ msgid "Go"
#~ msgstr "Go"

#~ msgid "There are no polygons to mark area."
#~ msgstr "There are no polygons to mark area."

#~ msgid "&Edit"
#~ msgstr "&Edit"

#~ msgid "&Options"
#~ msgstr "&Options"

#~ msgid "Measurement Tool"
#~ msgstr "Measurement Tool"

#~ msgid "Margin value is missing or wrong format. Add it and retry."
#~ msgstr "Margin value is missing or wrong format. Add it and retry."

#~ msgid "Gap size value is missing or wrong format. Add it and retry."
#~ msgstr "Gap size value is missing or wrong format. Add it and retry."

#~ msgid "Measurement"
#~ msgstr "Measurement"

#~ msgid "Meas. Tool"
#~ msgstr "Meas. Tool"

#~ msgid "Not available with the current Graphic Engine Legacy(2D)."
#~ msgstr "Not available with the current Graphic Engine Legacy(2D)."

#~ msgid "ToolMove.on_left_click()"
#~ msgstr "ToolMove.on_left_click()"

#~ msgid "on_paint_button_click"
#~ msgstr "on_paint_button_click"

#~ msgid "PaintTool.paint_poly()"
#~ msgstr "PaintTool.paint_poly()"

#~ msgid "ToolSolderPaste.on_view_gcode()"
#~ msgstr "ToolSolderPaste.on_view_gcode()"

#~ msgid "App.on_fileopenscript() -->"
#~ msgstr "App.on_fileopenscript() -->"

#~ msgid "<span style=\"color:green;\"><b>%s</b></span>"
#~ msgstr "<span style=\"color:green;\"><b>%s</b></span>"

#~ msgid "<span style=\"color:red;\"><b>%s</b></span>"
#~ msgstr "<span style=\"color:red;\"><b>%s</b></span>"

#~ msgid "FlatCAMObj.GeometryObject.mtool_gen_cncjob() -->"
#~ msgstr "FlatCAMObj.GeometryObject.mtool_gen_cncjob() -->"

#~ msgid "FlatCAMCNNJob.on_edit_code_click() -->"
#~ msgstr "FlatCAMCNNJob.on_edit_code_click() -->"

#~ msgid ""
#~ "toolbars, key shortcuts or even dragging and dropping the files on the GUI"
#~ msgstr ""
#~ "toolbars, key shortcuts or even dragging and dropping the files on the GUI"

#~ msgid ""
#~ "You can also load a FlatCAM project by double clicking on the project "
#~ "file, drag"
#~ msgstr ""
#~ "You can also load a FlatCAM project by double clicking on the project "
#~ "file, drag"

#~ msgid ""
#~ "Once an object is available in the Project Tab, by selecting it and then "
#~ "focusing on"
#~ msgstr ""
#~ "Once an object is available in the Project Tab, by selecting it and then "
#~ "focusing on"

#~ msgid "SELECTED TAB"
#~ msgstr "SELECTED TAB"

#~ msgid "more simpler is to double click the object name in the Project Tab"
#~ msgstr "more simpler is to double click the object name in the Project Tab"

#~ msgid "will be updated with the object properties according to"
#~ msgstr "will be updated with the object properties according to"

#~ msgid "kind: Gerber, Excellon, Geometry or CNCJob object"
#~ msgstr "kind: Gerber, Excellon, Geometry or CNCJob object"

#~ msgid ""
#~ "If the selection of the object is done on the canvas by single click "
#~ "instead, and the"
#~ msgstr ""
#~ "If the selection of the object is done on the canvas by single click "
#~ "instead, and the"

#~ msgid "and populate it even if it was out of focus"
#~ msgstr "and populate it even if it was out of focus"

#~ msgid "Gerber/Excellon Object"
#~ msgstr "Gerber/Excellon Object"

#~ msgid "Add tools (change param in Selected Tab)"
#~ msgstr "Add tools (change param in Selected Tab)"

#~ msgid "Generate CNCJob"
#~ msgstr "Generate CNCJob"

#~ msgid ""
#~ "Verify GCode (through Edit CNC Code) and/or append/prepend to GCode "
#~ "(again, done in"
#~ msgstr ""
#~ "Verify GCode (through Edit CNC Code) and/or append/prepend to GCode "
#~ "(again, done in"

#~ msgid "Shortcuts List"
#~ msgstr "Shortcuts List"

#~ msgid "or through"
#~ msgstr "or through"

#~ msgid "own key shortcut"
#~ msgstr "own key shortcut"

#~ msgid "polygons"
#~ msgstr "polygons"

#~ msgid "geo"
#~ msgstr "geo"

#~ msgid "Stop"
#~ msgstr "Stop"

#~ msgid "Generating panel ..."
#~ msgstr "Generating panel ..."

#~ msgid "Spawning copies"
#~ msgstr "Spawning copies"

#~ msgid "Parsing tool"
#~ msgstr "Parsing tool"

#~ msgid ""
#~ " Wrong value format for self.defaults[\"feedrate_probe\"] or self."
#~ "options[\"feedrate_probe\"]"
#~ msgstr ""
#~ " Wrong value format for self.defaults[\"feedrate_probe\"] or self."
#~ "options[\"feedrate_probe\"]"

#~ msgid "Wrong optimization type selected."
#~ msgstr "Wrong optimization type selected."

#~ msgid "FILE ASSOCIATIONS"
#~ msgstr "FILE ASSOCIATIONS"

#~ msgid "MH"
#~ msgstr "MH"

#~ msgid "Feedrate (Plunge)"
#~ msgstr "Feedrate (Plunge)"

#~ msgid ""
#~ "Parameters used to create a CNC Job object\n"
#~ "for this drill object that are shown when App Level is Advanced."
#~ msgstr ""
#~ "Parameters used to create a CNC Job object\n"
#~ "for this drill object that are shown when App Level is Advanced."

#~ msgid ""
#~ "Parameters to create a CNC Job object\n"
#~ "tracing the contours of a Geometry object."
#~ msgstr ""
#~ "Parameters to create a CNC Job object\n"
#~ "tracing the contours of a Geometry object."

#~ msgid "Manufacturing"
#~ msgstr "Manufacturing"

#~ msgid "Function"
#~ msgstr "Function"

#~ msgid ""
#~ "Juan Pablo Caram <BR><BR>Denis Hayrullin<BR>Kamil Sopko<BR>Marius "
#~ "Stanciu<BR>Matthieu Berthomé<BR><Br>and many others found <a href = "
#~ "\"https://bitbucket.org/jpcgt/flatcam/pull-requests/?state=MERGED\">here."
#~ "</a><BR><BR>"
#~ msgstr ""
#~ "Juan Pablo Caram <BR><BR>Denis Hayrullin<BR>Kamil Sopko<BR>Marius "
#~ "Stanciu<BR>Matthieu Berthomé<BR><Br>and many others found <a href = "
#~ "\"https://bitbucket.org/jpcgt/flatcam/pull-requests/?state=MERGED\">here."
#~ "</a><BR><BR>"

#~ msgid ""
#~ "\n"
#~ "<p><span style=\"font-size:{tsize}px\"><strong>Selected Tab - Choose an "
#~ "Item from Project Tab</strong></span></p>\n"
#~ "\n"
#~ "<p><span style=\"font-size:{fsize}px\"><strong>Details</strong>:<br />\n"
#~ "The normal flow when working in FlatCAM is the following:</span></p>\n"
#~ "\n"
#~ "<ol>\n"
#~ "\t<li><span style=\"font-size:{fsize}px\">Loat/Import a Gerber, Excellon, "
#~ "Gcode, DXF, Raster Image or SVG file into FlatCAM using either the "
#~ "menu&#39;s, toolbars, key shortcuts or even dragging and dropping the "
#~ "files on the GUI.<br />\n"
#~ "\t<br />\n"
#~ "\tYou can also load a <strong>FlatCAM project</strong> by double clicking "
#~ "on the project file, drag &amp; drop of the file into the FLATCAM GUI or "
#~ "through the menu/toolbar links offered within the app.</span><br />\n"
#~ "\t&nbsp;</li>\n"
#~ "\t<li><span style=\"font-size:{fsize}px\">Once an object is available in "
#~ "the Project Tab, by selecting it and then focusing on <strong>SELECTED "
#~ "TAB </strong>(more simpler is to double click the object name in the "
#~ "Project Tab), <strong>SELECTED TAB </strong>will be updated with the "
#~ "object properties according to it&#39;s kind: Gerber, Excellon, Geometry "
#~ "or CNCJob object.<br />\n"
#~ "\t<br />\n"
#~ "\tIf the selection of the object is done on the canvas by single click "
#~ "instead, and the <strong>SELECTED TAB</strong> is in focus, again the "
#~ "object properties will be displayed into the Selected Tab. Alternatively, "
#~ "double clicking on the object on the canvas will bring the "
#~ "<strong>SELECTED TAB</strong> and populate it even if it was out of focus."
#~ "<br />\n"
#~ "\t<br />\n"
#~ "\tYou can change the parameters in this screen and the flow direction is "
#~ "like this:<br />\n"
#~ "\t<br />\n"
#~ "\t<strong>Gerber/Excellon Object</strong> -&gt; Change Param -&gt; "
#~ "Generate Geometry -&gt;<strong> Geometry Object </strong>-&gt; Add tools "
#~ "(change param in Selected Tab) -&gt; Generate CNCJob -&gt;<strong> CNCJob "
#~ "Object </strong>-&gt; Verify GCode (through Edit CNC Code) and/or append/"
#~ "prepend to GCode (again, done in <strong>SELECTED TAB)&nbsp;</strong>-"
#~ "&gt; Save GCode</span></li>\n"
#~ "</ol>\n"
#~ "\n"
#~ "<p><span style=\"font-size:{fsize}px\">A list of key shortcuts is "
#~ "available through an menu entry in <strong>Help -&gt; Shortcuts List</"
#~ "strong>&nbsp;or through it&#39;s own key shortcut: <strong>F3</strong>.</"
#~ "span></p>\n"
#~ "\n"
#~ "        "
#~ msgstr ""
#~ "\n"
#~ "<p><span style=\"font-size:{tsize}px\"><strong>Selected Tab - Choose an "
#~ "Item from Project Tab</strong></span></p>\n"
#~ "\n"
#~ "<p><span style=\"font-size:{fsize}px\"><strong>Details</strong>:<br />\n"
#~ "The normal flow when working in FlatCAM is the following:</span></p>\n"
#~ "\n"
#~ "<ol>\n"
#~ "\t<li><span style=\"font-size:{fsize}px\">Loat/Import a Gerber, Excellon, "
#~ "Gcode, DXF, Raster Image or SVG file into FlatCAM using either the "
#~ "menu&#39;s, toolbars, key shortcuts or even dragging and dropping the "
#~ "files on the GUI.<br />\n"
#~ "\t<br />\n"
#~ "\tYou can also load a <strong>FlatCAM project</strong> by double clicking "
#~ "on the project file, drag &amp; drop of the file into the FLATCAM GUI or "
#~ "through the menu/toolbar links offered within the app.</span><br />\n"
#~ "\t&nbsp;</li>\n"
#~ "\t<li><span style=\"font-size:{fsize}px\">Once an object is available in "
#~ "the Project Tab, by selecting it and then focusing on <strong>SELECTED "
#~ "TAB </strong>(more simpler is to double click the object name in the "
#~ "Project Tab), <strong>SELECTED TAB </strong>will be updated with the "
#~ "object properties according to it&#39;s kind: Gerber, Excellon, Geometry "
#~ "or CNCJob object.<br />\n"
#~ "\t<br />\n"
#~ "\tIf the selection of the object is done on the canvas by single click "
#~ "instead, and the <strong>SELECTED TAB</strong> is in focus, again the "
#~ "object properties will be displayed into the Selected Tab. Alternatively, "
#~ "double clicking on the object on the canvas will bring the "
#~ "<strong>SELECTED TAB</strong> and populate it even if it was out of focus."
#~ "<br />\n"
#~ "\t<br />\n"
#~ "\tYou can change the parameters in this screen and the flow direction is "
#~ "like this:<br />\n"
#~ "\t<br />\n"
#~ "\t<strong>Gerber/Excellon Object</strong> -&gt; Change Param -&gt; "
#~ "Generate Geometry -&gt;<strong> Geometry Object </strong>-&gt; Add tools "
#~ "(change param in Selected Tab) -&gt; Generate CNCJob -&gt;<strong> CNCJob "
#~ "Object </strong>-&gt; Verify GCode (through Edit CNC Code) and/or append/"
#~ "prepend to GCode (again, done in <strong>SELECTED TAB)&nbsp;</strong>-"
#~ "&gt; Save GCode</span></li>\n"
#~ "</ol>\n"
#~ "\n"
#~ "<p><span style=\"font-size:{fsize}px\">A list of key shortcuts is "
#~ "available through an menu entry in <strong>Help -&gt; Shortcuts List</"
#~ "strong>&nbsp;or through it&#39;s own key shortcut: <strong>F3</strong>.</"
#~ "span></p>\n"
#~ "\n"
#~ "        "

#~ msgid "Run Script ...\tShift+S"
#~ msgstr "Run Script ...\tShift+S"

#~| msgid ""
#~| "<font size=8><B>FlatCAM</B></font><BR>Version {version} {beta} ({date}) "
#~| "- {arch} <BR><BR>2D Computer-Aided Printed Circuit "
#~| "Board<BR>Manufacturing.<BR><BR>(c) 2014-2019 <B>Juan Pablo Caram</"
#~| "B><BR><BR><B> Main Contributors:</B><BR>Denis Hayrullin<BR>Kamil "
#~| "Sopko<BR>Marius Stanciu<BR>Matthieu Berthomé<BR>and many others found <a "
#~| "href = \"https://bitbucket.org/jpcgt/flatcam/pull-requests/?state=MERGED"
#~| "\">here.</a><BR><BR>Development is done <a href = \"https://bitbucket."
#~| "org/jpcgt/flatcam/src/Beta/\">here.</a><BR>DOWNLOAD area <a href = "
#~| "\"https://bitbucket.org/jpcgt/flatcam/downloads/\">here.</a><BR>"
#~ msgid ""
#~ "<font size=8><B>FlatCAM</B></font><BR>Version {version} {beta} ({date}) - "
#~ "{arch} <BR><BR>2D Computer-Aided Printed Circuit Board<BR>Manufacturing."
#~ "<BR><BR><B> License: </B><BR>Licensed under MIT license (2014 - "
#~ "2019)<BR>by (c)Juan Pablo Caram <BR><BR><B> Programmers:</B><BR>Denis "
#~ "Hayrullin<BR>Kamil Sopko<BR>Marius Stanciu<BR>Matthieu Berthomé<BR>and "
#~ "many others found <a href = \"https://bitbucket.org/jpcgt/flatcam/pull-"
#~ "requests/?state=MERGED\">here.</a><BR><BR><B>Development</B> is done <a "
#~ "href = \"https://bitbucket.org/jpcgt/flatcam/src/Beta/\">here.</"
#~ "a><BR><b>DOWNLOAD</B> area <a href = \"https://bitbucket.org/jpcgt/"
#~ "flatcam/downloads/\">here.</a><BR>"
#~ msgstr ""
#~ "<font size=8><B>FlatCAM</B></font><BR>Version {version} {beta} ({date}) - "
#~ "{arch} <BR><BR>2D Computer-Aided Printed Circuit Board<BR>Manufacturing."
#~ "<BR><BR><B> License: </B><BR>Licensed under MIT license (2014 - "
#~ "2019)<BR>by (c)Juan Pablo Caram <BR><BR><B> Programmers:</B><BR>Denis "
#~ "Hayrullin<BR>Kamil Sopko<BR>Marius Stanciu<BR>Matthieu Berthomé<BR>and "
#~ "many others found <a href = \"https://bitbucket.org/jpcgt/flatcam/pull-"
#~ "requests/?state=MERGED\">here.</a><BR><BR><B>Development</B> is done <a "
#~ "href = \"https://bitbucket.org/jpcgt/flatcam/src/Beta/\">here.</"
#~ "a><BR><b>DOWNLOAD</B> area <a href = \"https://bitbucket.org/jpcgt/"
#~ "flatcam/downloads/\">here.</a><BR>"

#~| msgid "[ERROR_NOTCL] Expected a GeometryObject, got %s"
#~ msgid "Expected a GeometryObject, got %s"
#~ msgstr "Expected a GeometryObject, got %s"

#~ msgid "Saved to: %s"
#~ msgstr "Saved to: %s"

#~ msgid "[WARNING_NOTCL] Adding Tool cancelled ..."
#~ msgstr "[WARNING_NOTCL] Adding Tool cancelled ..."

#~ msgid "%s"
#~ msgstr "%s"

#~| msgid "[ERROR]App.on_view_source() -->%s"
#~ msgid "App.on_view_source() -->"
#~ msgstr "App.on_view_source() -->"

#~ msgid "[success] Name changed from {old} to {new}"
#~ msgstr "[success] Name changed from {old} to {new}"

#~| msgid ""
#~| "[ERROR_NOTCL] Failed.\n"
#~| "%s"
#~ msgid "[ERROR_NOTCL] %s"
#~ msgstr "[ERROR_NOTCL] %s"

#~ msgid "Editor %s"
#~ msgstr "Editor %s"

#~ msgid "[success] Done. Path completed."
#~ msgstr "[success] Done. Path completed."

#~ msgid "[success] Paint done."
#~ msgstr "[success] Paint done."

#~ msgid "About"
#~ msgstr "About"

#~| msgid ""
#~| "<b>General Shortcut list</b><br>\n"
#~| "            <table border=\"0\" cellpadding=\"0\" cellspacing=\"0\" "
#~| "style=\"width:283px\">\n"
#~| "                <tbody>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\" width=\"89\"><strong>F3</"
#~| "strong></td>\n"
#~| "                        <td width=\"194\"><span style=\"color:"
#~| "#006400\"><strong>&nbsp;SHOW SHORTCUT LIST</strong></span></td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\">&nbsp;</td>\n"
#~| "                        <td>&nbsp;</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>1</strong></td>\n"
#~| "                        <td>&nbsp;Switch to Project Tab</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>2</strong></td>\n"
#~| "                        <td>&nbsp;Switch to Selected Tab</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>3</strong></td>\n"
#~| "                        <td>&nbsp;Switch to Tool Tab</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\">&nbsp;</td>\n"
#~| "                        <td>&nbsp;</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>B</strong></td>\n"
#~| "                        <td>&nbsp;New Gerber</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>E</strong></td>\n"
#~| "                        <td>&nbsp;Edit Object (if selected)</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>G</strong></td>\n"
#~| "                        <td>&nbsp;Grid On/Off</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>J</strong></td>\n"
#~| "                        <td>&nbsp;Jump to Coordinates</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>L</strong></td>\n"
#~| "                        <td>&nbsp;New Excellon</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>M</strong></td>\n"
#~| "                        <td>&nbsp;Move Obj</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>N</strong></td>\n"
#~| "                        <td>&nbsp;New Geometry</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>O</strong></td>\n"
#~| "                        <td>&nbsp;Set Origin</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>Q</strong></td>\n"
#~| "                        <td>&nbsp;Change Units</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>P</strong></td>\n"
#~| "                        <td>&nbsp;Open Properties Tool</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>R</strong></td>\n"
#~| "                        <td>&nbsp;Rotate by 90 degree CW</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>S</strong></td>\n"
#~| "                        <td>&nbsp;Shell Toggle</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>T</strong></td>\n"
#~| "                        <td>&nbsp;Add a Tool (when in Geometry Selected "
#~| "Tab or in Tools NCC or Tools Paint)</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>V</strong></td>\n"
#~| "                        <td>&nbsp;Zoom Fit</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>X</strong></td>\n"
#~| "                        <td>&nbsp;Flip on X_axis</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>Y</strong></td>\n"
#~| "                        <td>&nbsp;Flip on Y_axis</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>&#39;-&#39;</strong></"
#~| "td>\n"
#~| "                        <td>&nbsp;Zoom Out</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>&#39;=&#39;</strong></"
#~| "td>\n"
#~| "                        <td>&nbsp;Zoom In</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\">&nbsp;</td>\n"
#~| "                        <td>&nbsp;</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>Ctrl+A</strong></td>\n"
#~| "                        <td>&nbsp;Select All</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>Ctrl+C</strong></td>\n"
#~| "                        <td>&nbsp;Copy Obj</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>Ctrl+E</strong></td>\n"
#~| "                        <td>&nbsp;Open Excellon File</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>Ctrl+G</strong></td>\n"
#~| "                        <td>&nbsp;Open Gerber File</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>Ctrl+N</strong></td>\n"
#~| "                        <td>&nbsp;New Project</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>Ctrl+M</strong></td>\n"
#~| "                        <td>&nbsp;Measurement Tool</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>Ctrl+O</strong></td>\n"
#~| "                        <td>&nbsp;Open Project</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>Ctrl+S</strong></td>\n"
#~| "                        <td>&nbsp;Save Project As</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>Ctrl+F10</strong></"
#~| "td>\n"
#~| "                        <td>&nbsp;Toggle Plot Area</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\">&nbsp;</td>\n"
#~| "                        <td>&nbsp;</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>Shift+C</strong></td>\n"
#~| "                        <td>&nbsp;Copy Obj_Name</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>Shift+E</strong></td>\n"
#~| "                        <td>&nbsp;Toggle Code Editor</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>Shift+G</strong></td>\n"
#~| "                        <td>&nbsp;Toggle the axis</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>Shift+P</strong></td>\n"
#~| "                        <td>&nbsp;Open Preferences Window</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>Shift+R</strong></td>\n"
#~| "                        <td>&nbsp;Rotate by 90 degree CCW</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>Shift+S</strong></td>\n"
#~| "                        <td>&nbsp;Run a Script</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>Shift+W</strong></td>\n"
#~| "                        <td>&nbsp;Toggle the workspace</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>Shift+X</strong></td>\n"
#~| "                        <td>&nbsp;Skew on X axis</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>Shift+Y</strong></td>\n"
#~| "                        <td>&nbsp;Skew on Y axis</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\">&nbsp;</td>\n"
#~| "                        <td>&nbsp;</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>Alt+C</strong></td>\n"
#~| "                        <td>&nbsp;Calculators Tool</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>Alt+D</strong></td>\n"
#~| "                        <td>&nbsp;2-Sided PCB Tool</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>Alt+K</strong></td>\n"
#~| "                        <td>&nbsp;Solder Paste Dispensing Tool</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>Alt+L</strong></td>\n"
#~| "                        <td>&nbsp;Film PCB Tool</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>Alt+N</strong></td>\n"
#~| "                        <td>&nbsp;Non-Copper Clearing Tool</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>Alt+P</strong></td>\n"
#~| "                        <td>&nbsp;Paint Area Tool</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>Alt+Q</strong></td>\n"
#~| "                        <td>&nbsp;PDF Import Tool</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>Alt+R</strong></td>\n"
#~| "                        <td>&nbsp;Transformations Tool</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>Alt+S</strong></td>\n"
#~| "                        <td>&nbsp;View File Source</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>Alt+U</strong></td>\n"
#~| "                        <td>&nbsp;Cutout PCB Tool</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>Alt+1</strong></td>\n"
#~| "                        <td>&nbsp;Enable all Plots</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>Alt+2</strong></td>\n"
#~| "                        <td>&nbsp;Disable all Plots</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>Alt+3</strong></td>\n"
#~| "                        <td>&nbsp;Disable Non-selected Plots</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>Alt+F10</strong></td>\n"
#~| "                        <td>&nbsp;Toggle Full Screen</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\">&nbsp;</td>\n"
#~| "                        <td>&nbsp;</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>F1</strong></td>\n"
#~| "                        <td>&nbsp;Open Online Manual</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>F4</strong></td>\n"
#~| "                        <td>&nbsp;Open Online Tutorials</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>Del</strong></td>\n"
#~| "                        <td>&nbsp;Delete Object</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>Del</strong></td>\n"
#~| "                        <td>&nbsp;Alternate: Delete Tool</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>'`'</strong></td>\n"
#~| "                        <td>&nbsp;(left to Key_1)Toogle Notebook Area "
#~| "(Left Side)</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>SPACE</strong></td>\n"
#~| "                        <td>&nbsp;En(Dis)able Obj Plot</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>Escape</strong></td>\n"
#~| "                        <td>&nbsp;Deselects all objects</td>\n"
#~| "                    </tr>\n"
#~| "                </tbody>\n"
#~| "            </table>\n"
#~| "    \n"
#~| "            "
#~ msgid ""
#~ "<b>General Shortcut list</b><br>\n"
#~ "            <table border=\"0\" cellpadding=\"0\" cellspacing=\"0\" style="
#~ "\"width:283px\">\n"
#~ "                <tbody>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\" width=\"89\"><strong>F3</"
#~ "strong></td>\n"
#~ "                        <td width=\"194\"><span style=\"color:"
#~ "#006400\"><strong>&nbsp;SHOW SHORTCUT LIST</strong></span></td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>1</strong></td>\n"
#~ "                        <td>&nbsp;Switch to Project Tab</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>2</strong></td>\n"
#~ "                        <td>&nbsp;Switch to Selected Tab</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>3</strong></td>\n"
#~ "                        <td>&nbsp;Switch to Tool Tab</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>B</strong></td>\n"
#~ "                        <td>&nbsp;New Gerber</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>E</strong></td>\n"
#~ "                        <td>&nbsp;Edit Object (if selected)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>G</strong></td>\n"
#~ "                        <td>&nbsp;Grid On/Off</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>J</strong></td>\n"
#~ "                        <td>&nbsp;Jump to Coordinates</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>L</strong></td>\n"
#~ "                        <td>&nbsp;New Excellon</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>M</strong></td>\n"
#~ "                        <td>&nbsp;Move Obj</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>N</strong></td>\n"
#~ "                        <td>&nbsp;New Geometry</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>O</strong></td>\n"
#~ "                        <td>&nbsp;Set Origin</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Q</strong></td>\n"
#~ "                        <td>&nbsp;Change Units</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>P</strong></td>\n"
#~ "                        <td>&nbsp;Open Properties Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>R</strong></td>\n"
#~ "                        <td>&nbsp;Rotate by 90 degree CW</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>S</strong></td>\n"
#~ "                        <td>&nbsp;Shell Toggle</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>T</strong></td>\n"
#~ "                        <td>&nbsp;Add a Tool (when in Geometry Selected "
#~ "Tab or in Tools NCC or Tools Paint)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>V</strong></td>\n"
#~ "                        <td>&nbsp;Zoom Fit</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>X</strong></td>\n"
#~ "                        <td>&nbsp;Flip on X_axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Y</strong></td>\n"
#~ "                        <td>&nbsp;Flip on Y_axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>&#39;-&#39;</strong></"
#~ "td>\n"
#~ "                        <td>&nbsp;Zoom Out</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>&#39;=&#39;</strong></"
#~ "td>\n"
#~ "                        <td>&nbsp;Zoom In</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Ctrl+A</strong></td>\n"
#~ "                        <td>&nbsp;Select All</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Ctrl+C</strong></td>\n"
#~ "                        <td>&nbsp;Copy Obj</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Ctrl+E</strong></td>\n"
#~ "                        <td>&nbsp;Open Excellon File</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Ctrl+G</strong></td>\n"
#~ "                        <td>&nbsp;Open Gerber File</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Ctrl+N</strong></td>\n"
#~ "                        <td>&nbsp;New Project</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Ctrl+M</strong></td>\n"
#~ "                        <td>&nbsp;Measurement Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Ctrl+O</strong></td>\n"
#~ "                        <td>&nbsp;Open Project</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Ctrl+S</strong></td>\n"
#~ "                        <td>&nbsp;Save Project As</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Ctrl+F10</strong></td>\n"
#~ "                        <td>&nbsp;Toggle Plot Area</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Shift+C</strong></td>\n"
#~ "                        <td>&nbsp;Copy Obj_Name</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Shift+E</strong></td>\n"
#~ "                        <td>&nbsp;Toggle Code Editor</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Shift+G</strong></td>\n"
#~ "                        <td>&nbsp;Toggle the axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Shift+P</strong></td>\n"
#~ "                        <td>&nbsp;Open Preferences Window</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Shift+R</strong></td>\n"
#~ "                        <td>&nbsp;Rotate by 90 degree CCW</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Shift+S</strong></td>\n"
#~ "                        <td>&nbsp;Run a Script</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Shift+W</strong></td>\n"
#~ "                        <td>&nbsp;Toggle the workspace</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Shift+X</strong></td>\n"
#~ "                        <td>&nbsp;Skew on X axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Shift+Y</strong></td>\n"
#~ "                        <td>&nbsp;Skew on Y axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Alt+C</strong></td>\n"
#~ "                        <td>&nbsp;Calculators Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Alt+D</strong></td>\n"
#~ "                        <td>&nbsp;2-Sided PCB Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Alt+K</strong></td>\n"
#~ "                        <td>&nbsp;Solder Paste Dispensing Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Alt+L</strong></td>\n"
#~ "                        <td>&nbsp;Film PCB Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Alt+N</strong></td>\n"
#~ "                        <td>&nbsp;Non-Copper Clearing Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Alt+P</strong></td>\n"
#~ "                        <td>&nbsp;Paint Area Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Alt+Q</strong></td>\n"
#~ "                        <td>&nbsp;PDF Import Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Alt+R</strong></td>\n"
#~ "                        <td>&nbsp;Transformations Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Alt+S</strong></td>\n"
#~ "                        <td>&nbsp;View File Source</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Alt+U</strong></td>\n"
#~ "                        <td>&nbsp;Cutout PCB Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Alt+1</strong></td>\n"
#~ "                        <td>&nbsp;Enable all Plots</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Alt+2</strong></td>\n"
#~ "                        <td>&nbsp;Disable all Plots</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Alt+3</strong></td>\n"
#~ "                        <td>&nbsp;Disable Non-selected Plots</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Alt+F10</strong></td>\n"
#~ "                        <td>&nbsp;Toggle Full Screen</td>\n"
#~ "                    </tr>                 \n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Ctrl+Alt+X</strong></"
#~ "td>\n"
#~ "                        <td>&nbsp;Abort current task (gracefully)</td>\n"
#~ "                    </tr>                    \n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>F1</strong></td>\n"
#~ "                        <td>&nbsp;Open Online Manual</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>F4</strong></td>\n"
#~ "                        <td>&nbsp;Open Online Tutorials</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Del</strong></td>\n"
#~ "                        <td>&nbsp;Delete Object</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Del</strong></td>\n"
#~ "                        <td>&nbsp;Alternate: Delete Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>'`'</strong></td>\n"
#~ "                        <td>&nbsp;(left to Key_1)Toogle Notebook Area "
#~ "(Left Side)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>SPACE</strong></td>\n"
#~ "                        <td>&nbsp;En(Dis)able Obj Plot</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Escape</strong></td>\n"
#~ "                        <td>&nbsp;Deselects all objects</td>\n"
#~ "                    </tr>\n"
#~ "                </tbody>\n"
#~ "            </table>\n"
#~ "    \n"
#~ "            "
#~ msgstr ""
#~ "<b>General Shortcut list</b><br>\n"
#~ "            <table border=\"0\" cellpadding=\"0\" cellspacing=\"0\" style="
#~ "\"width:283px\">\n"
#~ "                <tbody>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\" width=\"89\"><strong>F3</"
#~ "strong></td>\n"
#~ "                        <td width=\"194\"><span style=\"color:"
#~ "#006400\"><strong>&nbsp;SHOW SHORTCUT LIST</strong></span></td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>1</strong></td>\n"
#~ "                        <td>&nbsp;Switch to Project Tab</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>2</strong></td>\n"
#~ "                        <td>&nbsp;Switch to Selected Tab</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>3</strong></td>\n"
#~ "                        <td>&nbsp;Switch to Tool Tab</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>B</strong></td>\n"
#~ "                        <td>&nbsp;New Gerber</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>E</strong></td>\n"
#~ "                        <td>&nbsp;Edit Object (if selected)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>G</strong></td>\n"
#~ "                        <td>&nbsp;Grid On/Off</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>J</strong></td>\n"
#~ "                        <td>&nbsp;Jump to Coordinates</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>L</strong></td>\n"
#~ "                        <td>&nbsp;New Excellon</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>M</strong></td>\n"
#~ "                        <td>&nbsp;Move Obj</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>N</strong></td>\n"
#~ "                        <td>&nbsp;New Geometry</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>O</strong></td>\n"
#~ "                        <td>&nbsp;Set Origin</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Q</strong></td>\n"
#~ "                        <td>&nbsp;Change Units</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>P</strong></td>\n"
#~ "                        <td>&nbsp;Open Properties Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>R</strong></td>\n"
#~ "                        <td>&nbsp;Rotate by 90 degree CW</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>S</strong></td>\n"
#~ "                        <td>&nbsp;Shell Toggle</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>T</strong></td>\n"
#~ "                        <td>&nbsp;Add a Tool (when in Geometry Selected "
#~ "Tab or in Tools NCC or Tools Paint)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>V</strong></td>\n"
#~ "                        <td>&nbsp;Zoom Fit</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>X</strong></td>\n"
#~ "                        <td>&nbsp;Flip on X_axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Y</strong></td>\n"
#~ "                        <td>&nbsp;Flip on Y_axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>&#39;-&#39;</strong></"
#~ "td>\n"
#~ "                        <td>&nbsp;Zoom Out</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>&#39;=&#39;</strong></"
#~ "td>\n"
#~ "                        <td>&nbsp;Zoom In</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Ctrl+A</strong></td>\n"
#~ "                        <td>&nbsp;Select All</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Ctrl+C</strong></td>\n"
#~ "                        <td>&nbsp;Copy Obj</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Ctrl+E</strong></td>\n"
#~ "                        <td>&nbsp;Open Excellon File</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Ctrl+G</strong></td>\n"
#~ "                        <td>&nbsp;Open Gerber File</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Ctrl+N</strong></td>\n"
#~ "                        <td>&nbsp;New Project</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Ctrl+M</strong></td>\n"
#~ "                        <td>&nbsp;Measurement Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Ctrl+O</strong></td>\n"
#~ "                        <td>&nbsp;Open Project</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Ctrl+S</strong></td>\n"
#~ "                        <td>&nbsp;Save Project As</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Ctrl+F10</strong></td>\n"
#~ "                        <td>&nbsp;Toggle Plot Area</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Shift+C</strong></td>\n"
#~ "                        <td>&nbsp;Copy Obj_Name</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Shift+E</strong></td>\n"
#~ "                        <td>&nbsp;Toggle Code Editor</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Shift+G</strong></td>\n"
#~ "                        <td>&nbsp;Toggle the axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Shift+P</strong></td>\n"
#~ "                        <td>&nbsp;Open Preferences Window</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Shift+R</strong></td>\n"
#~ "                        <td>&nbsp;Rotate by 90 degree CCW</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Shift+S</strong></td>\n"
#~ "                        <td>&nbsp;Run a Script</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Shift+W</strong></td>\n"
#~ "                        <td>&nbsp;Toggle the workspace</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Shift+X</strong></td>\n"
#~ "                        <td>&nbsp;Skew on X axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Shift+Y</strong></td>\n"
#~ "                        <td>&nbsp;Skew on Y axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Alt+C</strong></td>\n"
#~ "                        <td>&nbsp;Calculators Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Alt+D</strong></td>\n"
#~ "                        <td>&nbsp;2-Sided PCB Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Alt+K</strong></td>\n"
#~ "                        <td>&nbsp;Solder Paste Dispensing Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Alt+L</strong></td>\n"
#~ "                        <td>&nbsp;Film PCB Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Alt+N</strong></td>\n"
#~ "                        <td>&nbsp;Non-Copper Clearing Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Alt+P</strong></td>\n"
#~ "                        <td>&nbsp;Paint Area Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Alt+Q</strong></td>\n"
#~ "                        <td>&nbsp;PDF Import Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Alt+R</strong></td>\n"
#~ "                        <td>&nbsp;Transformations Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Alt+S</strong></td>\n"
#~ "                        <td>&nbsp;View File Source</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Alt+U</strong></td>\n"
#~ "                        <td>&nbsp;Cutout PCB Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Alt+1</strong></td>\n"
#~ "                        <td>&nbsp;Enable all Plots</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Alt+2</strong></td>\n"
#~ "                        <td>&nbsp;Disable all Plots</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Alt+3</strong></td>\n"
#~ "                        <td>&nbsp;Disable Non-selected Plots</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Alt+F10</strong></td>\n"
#~ "                        <td>&nbsp;Toggle Full Screen</td>\n"
#~ "                    </tr>                 \n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Ctrl+Alt+X</strong></"
#~ "td>\n"
#~ "                        <td>&nbsp;Abort current task (gracefully)</td>\n"
#~ "                    </tr>                    \n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>F1</strong></td>\n"
#~ "                        <td>&nbsp;Open Online Manual</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>F4</strong></td>\n"
#~ "                        <td>&nbsp;Open Online Tutorials</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Del</strong></td>\n"
#~ "                        <td>&nbsp;Delete Object</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Del</strong></td>\n"
#~ "                        <td>&nbsp;Alternate: Delete Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>'`'</strong></td>\n"
#~ "                        <td>&nbsp;(left to Key_1)Toogle Notebook Area "
#~ "(Left Side)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>SPACE</strong></td>\n"
#~ "                        <td>&nbsp;En(Dis)able Obj Plot</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Escape</strong></td>\n"
#~ "                        <td>&nbsp;Deselects all objects</td>\n"
#~ "                    </tr>\n"
#~ "                </tbody>\n"
#~ "            </table>\n"
#~ "    \n"
#~ "            "

#~ msgid ""
#~ "<b>Editor Shortcut list</b><br>\n"
#~ "            <br>\n"
#~ "            <strong><span style=\"color:#0000ff\">GEOMETRY EDITOR</span></"
#~ "strong><br>\n"
#~ "    \n"
#~ "            <table border=\"0\" cellpadding=\"0\" cellspacing=\"0\" style="
#~ "\"width:283px\">\n"
#~ "                <tbody>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\" width=\"89\"><strong>A</"
#~ "strong></td>\n"
#~ "                        <td width=\"194\">&nbsp;Draw an Arc</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>B</strong></td>\n"
#~ "                        <td>&nbsp;Buffer Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>C</strong></td>\n"
#~ "                        <td>&nbsp;Copy Geo Item</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>D</strong></td>\n"
#~ "                        <td>&nbsp;Within Add Arc will toogle the ARC "
#~ "direction: CW or CCW</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>E</strong></td>\n"
#~ "                        <td>&nbsp;Polygon Intersection Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>I</strong></td>\n"
#~ "                        <td>&nbsp;Paint Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>J</strong></td>\n"
#~ "                        <td>&nbsp;Jump to Location (x, y)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>K</strong></td>\n"
#~ "                        <td>&nbsp;Toggle Corner Snap</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>M</strong></td>\n"
#~ "                        <td>&nbsp;Move Geo Item</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>M</strong></td>\n"
#~ "                        <td>&nbsp;Within Add Arc will cycle through the "
#~ "ARC modes</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>N</strong></td>\n"
#~ "                        <td>&nbsp;Draw a Polygon</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>O</strong></td>\n"
#~ "                        <td>&nbsp;Draw a Circle</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>P</strong></td>\n"
#~ "                        <td>&nbsp;Draw a Path</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>R</strong></td>\n"
#~ "                        <td>&nbsp;Draw Rectangle</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>S</strong></td>\n"
#~ "                        <td>&nbsp;Polygon Substraction Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>T</strong></td>\n"
#~ "                        <td>&nbsp;Add Text Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>U</strong></td>\n"
#~ "                        <td>&nbsp;Polygon Union Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>X</strong></td>\n"
#~ "                        <td>&nbsp;Flip shape on X axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Y</strong></td>\n"
#~ "                        <td>&nbsp;Flip shape on Y axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Shift+X</strong></td>\n"
#~ "                        <td>&nbsp;Skew shape on X axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Shift+Y</strong></td>\n"
#~ "                        <td>&nbsp;Skew shape on Y axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Alt+R</strong></td>\n"
#~ "                        <td>&nbsp;Editor Transformation Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Alt+X</strong></td>\n"
#~ "                        <td>&nbsp;Offset shape on X axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Alt+Y</strong></td>\n"
#~ "                        <td>&nbsp;Offset shape on Y axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Ctrl+M</strong></td>\n"
#~ "                        <td>&nbsp;Measurement Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Ctrl+S</strong></td>\n"
#~ "                        <td>&nbsp;Save Object and Exit Editor</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Ctrl+X</strong></td>\n"
#~ "                        <td>&nbsp;Polygon Cut Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Space</strong></td>\n"
#~ "                        <td>&nbsp;Rotate Geometry</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ENTER</strong></td>\n"
#~ "                        <td>&nbsp;Finish drawing for certain tools</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ESC</strong></td>\n"
#~ "                        <td>&nbsp;Abort and return to Select</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Del</strong></td>\n"
#~ "                        <td>&nbsp;Delete Shape</td>\n"
#~ "                    </tr>\n"
#~ "                </tbody>\n"
#~ "            </table>\n"
#~ "            <br>\n"
#~ "            <br>\n"
#~ "            <strong><span style=\"color:#ff0000\">EXCELLON EDITOR</span></"
#~ "strong><br>\n"
#~ "            <table border=\"0\" cellpadding=\"0\" cellspacing=\"0\" style="
#~ "\"width:283px\">\n"
#~ "                <tbody>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\" width=\"89\"><strong>A</"
#~ "strong></td>\n"
#~ "                        <td width=\"194\">&nbsp;Add Drill Array</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>C</strong></td>\n"
#~ "                        <td>&nbsp;Copy Drill(s)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>D</strong></td>\n"
#~ "                        <td>&nbsp;Add Drill</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>J</strong></td>\n"
#~ "                        <td>&nbsp;Jump to Location (x, y)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>M</strong></td>\n"
#~ "                        <td>&nbsp;Move Drill(s)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\" width=\"89\"><strong>Q</"
#~ "strong></td>\n"
#~ "                        <td width=\"194\">&nbsp;Add Slot Array</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>R</strong></td>\n"
#~ "                        <td>&nbsp;Resize Drill(s)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>T</strong></td>\n"
#~ "                        <td>&nbsp;Add a new Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\" width=\"89\"><strong>W</"
#~ "strong></td>\n"
#~ "                        <td width=\"194\">&nbsp;Add Slot</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Del</strong></td>\n"
#~ "                        <td>&nbsp;Delete Drill(s)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Del</strong></td>\n"
#~ "                        <td>&nbsp;Alternate: Delete Tool(s)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ESC</strong></td>\n"
#~ "                        <td>&nbsp;Abort and return to Select</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Ctrl+S</strong></td>\n"
#~ "                        <td>&nbsp;Save Object and Exit Editor</td>\n"
#~ "                    </tr>\n"
#~ "                </tbody>\n"
#~ "            </table>\n"
#~ "            <br>\n"
#~ "            <br>\n"
#~ "            <strong><span style=\"color:#00ff00\">GERBER EDITOR</span></"
#~ "strong><br>\n"
#~ "            <table border=\"0\" cellpadding=\"0\" cellspacing=\"0\" style="
#~ "\"width:283px\">\n"
#~ "                <tbody>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\" width=\"89\"><strong>A</"
#~ "strong></td>\n"
#~ "                        <td width=\"194\">&nbsp;Add Pad Array</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>B</strong></td>\n"
#~ "                        <td>&nbsp;Buffer</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>C</strong></td>\n"
#~ "                        <td>&nbsp;Copy</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>D</strong></td>\n"
#~ "                        <td>&nbsp;Add Disc</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>E</strong></td>\n"
#~ "                        <td>&nbsp;Add SemiDisc</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>J</strong></td>\n"
#~ "                        <td>&nbsp;Jump to Location (x, y)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>M</strong></td>\n"
#~ "                        <td>&nbsp;Move</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>N</strong></td>\n"
#~ "                        <td>&nbsp;Add Region</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>P</strong></td>\n"
#~ "                        <td>&nbsp;Add Pad</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>R</strong></td>\n"
#~ "                        <td>&nbsp;Within Track & Region Tools will cycle "
#~ "in REVERSE the bend modes</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>S</strong></td>\n"
#~ "                        <td>&nbsp;Scale</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>T</strong></td>\n"
#~ "                        <td>&nbsp;Add Track</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>T</strong></td>\n"
#~ "                        <td>&nbsp;Within Track & Region Tools will cycle "
#~ "FORWARD the bend modes</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Del</strong></td>\n"
#~ "                        <td>&nbsp;Delete</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Del</strong></td>\n"
#~ "                        <td>&nbsp;Alternate: Delete Apertures</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ESC</strong></td>\n"
#~ "                        <td>&nbsp;Abort and return to Select</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Ctrl+E</strong></td>\n"
#~ "                        <td>&nbsp;Eraser Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Ctrl+S</strong></td>\n"
#~ "                        <td>&nbsp;Save Object and Exit Editor</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                     <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Alt+A</strong></td>\n"
#~ "                        <td>&nbsp;Mark Area Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Alt+N</strong></td>\n"
#~ "                        <td>&nbsp;Poligonize Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Alt+R</strong></td>\n"
#~ "                        <td>&nbsp;Transformation Tool</td>\n"
#~ "                    </tr>\n"
#~ "                </tbody>\n"
#~ "            </table>\n"
#~ "                    "
#~ msgstr ""
#~ "<b>Editor Shortcut list</b><br>\n"
#~ "            <br>\n"
#~ "            <strong><span style=\"color:#0000ff\">GEOMETRY EDITOR</span></"
#~ "strong><br>\n"
#~ "    \n"
#~ "            <table border=\"0\" cellpadding=\"0\" cellspacing=\"0\" style="
#~ "\"width:283px\">\n"
#~ "                <tbody>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\" width=\"89\"><strong>A</"
#~ "strong></td>\n"
#~ "                        <td width=\"194\">&nbsp;Draw an Arc</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>B</strong></td>\n"
#~ "                        <td>&nbsp;Buffer Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>C</strong></td>\n"
#~ "                        <td>&nbsp;Copy Geo Item</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>D</strong></td>\n"
#~ "                        <td>&nbsp;Within Add Arc will toogle the ARC "
#~ "direction: CW or CCW</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>E</strong></td>\n"
#~ "                        <td>&nbsp;Polygon Intersection Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>I</strong></td>\n"
#~ "                        <td>&nbsp;Paint Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>J</strong></td>\n"
#~ "                        <td>&nbsp;Jump to Location (x, y)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>K</strong></td>\n"
#~ "                        <td>&nbsp;Toggle Corner Snap</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>M</strong></td>\n"
#~ "                        <td>&nbsp;Move Geo Item</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>M</strong></td>\n"
#~ "                        <td>&nbsp;Within Add Arc will cycle through the "
#~ "ARC modes</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>N</strong></td>\n"
#~ "                        <td>&nbsp;Draw a Polygon</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>O</strong></td>\n"
#~ "                        <td>&nbsp;Draw a Circle</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>P</strong></td>\n"
#~ "                        <td>&nbsp;Draw a Path</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>R</strong></td>\n"
#~ "                        <td>&nbsp;Draw Rectangle</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>S</strong></td>\n"
#~ "                        <td>&nbsp;Polygon Substraction Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>T</strong></td>\n"
#~ "                        <td>&nbsp;Add Text Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>U</strong></td>\n"
#~ "                        <td>&nbsp;Polygon Union Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>X</strong></td>\n"
#~ "                        <td>&nbsp;Flip shape on X axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Y</strong></td>\n"
#~ "                        <td>&nbsp;Flip shape on Y axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Shift+X</strong></td>\n"
#~ "                        <td>&nbsp;Skew shape on X axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Shift+Y</strong></td>\n"
#~ "                        <td>&nbsp;Skew shape on Y axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Alt+R</strong></td>\n"
#~ "                        <td>&nbsp;Editor Transformation Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Alt+X</strong></td>\n"
#~ "                        <td>&nbsp;Offset shape on X axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Alt+Y</strong></td>\n"
#~ "                        <td>&nbsp;Offset shape on Y axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Ctrl+M</strong></td>\n"
#~ "                        <td>&nbsp;Measurement Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Ctrl+S</strong></td>\n"
#~ "                        <td>&nbsp;Save Object and Exit Editor</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Ctrl+X</strong></td>\n"
#~ "                        <td>&nbsp;Polygon Cut Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Space</strong></td>\n"
#~ "                        <td>&nbsp;Rotate Geometry</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ENTER</strong></td>\n"
#~ "                        <td>&nbsp;Finish drawing for certain tools</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ESC</strong></td>\n"
#~ "                        <td>&nbsp;Abort and return to Select</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Del</strong></td>\n"
#~ "                        <td>&nbsp;Delete Shape</td>\n"
#~ "                    </tr>\n"
#~ "                </tbody>\n"
#~ "            </table>\n"
#~ "            <br>\n"
#~ "            <br>\n"
#~ "            <strong><span style=\"color:#ff0000\">EXCELLON EDITOR</span></"
#~ "strong><br>\n"
#~ "            <table border=\"0\" cellpadding=\"0\" cellspacing=\"0\" style="
#~ "\"width:283px\">\n"
#~ "                <tbody>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\" width=\"89\"><strong>A</"
#~ "strong></td>\n"
#~ "                        <td width=\"194\">&nbsp;Add Drill Array</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>C</strong></td>\n"
#~ "                        <td>&nbsp;Copy Drill(s)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>D</strong></td>\n"
#~ "                        <td>&nbsp;Add Drill</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>J</strong></td>\n"
#~ "                        <td>&nbsp;Jump to Location (x, y)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>M</strong></td>\n"
#~ "                        <td>&nbsp;Move Drill(s)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\" width=\"89\"><strong>Q</"
#~ "strong></td>\n"
#~ "                        <td width=\"194\">&nbsp;Add Slot Array</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>R</strong></td>\n"
#~ "                        <td>&nbsp;Resize Drill(s)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>T</strong></td>\n"
#~ "                        <td>&nbsp;Add a new Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\" width=\"89\"><strong>W</"
#~ "strong></td>\n"
#~ "                        <td width=\"194\">&nbsp;Add Slot</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Del</strong></td>\n"
#~ "                        <td>&nbsp;Delete Drill(s)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Del</strong></td>\n"
#~ "                        <td>&nbsp;Alternate: Delete Tool(s)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ESC</strong></td>\n"
#~ "                        <td>&nbsp;Abort and return to Select</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Ctrl+S</strong></td>\n"
#~ "                        <td>&nbsp;Save Object and Exit Editor</td>\n"
#~ "                    </tr>\n"
#~ "                </tbody>\n"
#~ "            </table>\n"
#~ "            <br>\n"
#~ "            <br>\n"
#~ "            <strong><span style=\"color:#00ff00\">GERBER EDITOR</span></"
#~ "strong><br>\n"
#~ "            <table border=\"0\" cellpadding=\"0\" cellspacing=\"0\" style="
#~ "\"width:283px\">\n"
#~ "                <tbody>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\" width=\"89\"><strong>A</"
#~ "strong></td>\n"
#~ "                        <td width=\"194\">&nbsp;Add Pad Array</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>B</strong></td>\n"
#~ "                        <td>&nbsp;Buffer</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>C</strong></td>\n"
#~ "                        <td>&nbsp;Copy</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>D</strong></td>\n"
#~ "                        <td>&nbsp;Add Disc</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>E</strong></td>\n"
#~ "                        <td>&nbsp;Add SemiDisc</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>J</strong></td>\n"
#~ "                        <td>&nbsp;Jump to Location (x, y)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>M</strong></td>\n"
#~ "                        <td>&nbsp;Move</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>N</strong></td>\n"
#~ "                        <td>&nbsp;Add Region</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>P</strong></td>\n"
#~ "                        <td>&nbsp;Add Pad</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>R</strong></td>\n"
#~ "                        <td>&nbsp;Within Track & Region Tools will cycle "
#~ "in REVERSE the bend modes</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>S</strong></td>\n"
#~ "                        <td>&nbsp;Scale</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>T</strong></td>\n"
#~ "                        <td>&nbsp;Add Track</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>T</strong></td>\n"
#~ "                        <td>&nbsp;Within Track & Region Tools will cycle "
#~ "FORWARD the bend modes</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Del</strong></td>\n"
#~ "                        <td>&nbsp;Delete</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Del</strong></td>\n"
#~ "                        <td>&nbsp;Alternate: Delete Apertures</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ESC</strong></td>\n"
#~ "                        <td>&nbsp;Abort and return to Select</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Ctrl+E</strong></td>\n"
#~ "                        <td>&nbsp;Eraser Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Ctrl+S</strong></td>\n"
#~ "                        <td>&nbsp;Save Object and Exit Editor</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                     <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Alt+A</strong></td>\n"
#~ "                        <td>&nbsp;Mark Area Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Alt+N</strong></td>\n"
#~ "                        <td>&nbsp;Poligonize Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Alt+R</strong></td>\n"
#~ "                        <td>&nbsp;Transformation Tool</td>\n"
#~ "                    </tr>\n"
#~ "                </tbody>\n"
#~ "            </table>\n"
#~ "                    "

#~ msgid "[success] Done."
#~ msgstr "[success] Done."

#~ msgid "[WARNING_NOTCL] Cancelled."
#~ msgstr "[WARNING_NOTCL] Cancelled."

#~ msgid "[success] Added new tool with dia: {dia} {units}"
#~ msgstr "[success] Added new tool with dia: {dia} {units}"

#~ msgid "[WARNING_NOTCL] Application is saving the project. Please wait ..."
#~ msgstr "[WARNING_NOTCL] Application is saving the project. Please wait ..."

#~ msgid "<b>%s:</b>"
#~ msgstr "<b>%s:</b>"

#~ msgid "%s:"
#~ msgstr "%s:"

#~| msgid "[ERROR_NOTCL] Object not found: %s"
#~ msgid "Object not found: %s"
#~ msgstr "Object not found: %s"

#~ msgid "[success] Opened: %s"
#~ msgstr "[success] Opened: %s"

#~ msgid "[success] Paint All Done."
#~ msgstr "[success] Paint All Done."

#~| msgid ""
#~| "[ERROR] Could not do Paint All. Try a different combination of "
#~| "parameters. Or a different Method of paint\n"
#~| "%s"
#~ msgid ""
#~ "Could not do Paint All. Try a different combination of parameters. Or a "
#~ "different Method of paint\n"
#~ "%s"
#~ msgstr ""
#~ "Could not do Paint All. Try a different combination of parameters. Or a "
#~ "different Method of paint\n"
#~ "%s"

#~| msgid "[success] Paint All Done."
#~ msgid "[success] Paint Area Done."
#~ msgstr "[success] Paint Area Done."

#~ msgid "Generating panel ... Please wait."
#~ msgstr "Generating panel ... Please wait."

#~ msgid "...processing... [%s]"
#~ msgstr "...processing... [%s]"

#~ msgid "Parsing aperture %s geometry ..."
#~ msgstr "Parsing aperture %s geometry ..."

#~ msgid "[success] Skew on the %s axis done ..."
#~ msgstr "[success] Skew on the %s axis done ..."

#~ msgid "[ERROR_NOTCL] Could not load defaults file."
#~ msgstr "[ERROR_NOTCL] Could not load defaults file."

#~ msgid "[ERROR_NOTCL] Failed to parse defaults file."
#~ msgstr "[ERROR_NOTCL] Failed to parse defaults file."

#~ msgid "[ERROR_NOTCL] An internal error has ocurred. See shell.\n"
#~ msgstr "[ERROR_NOTCL] An internal error has ocurred. See shell.\n"

#~ msgid "[success] Defaults saved."
#~ msgstr "[success] Defaults saved."

#~ msgid "[success] Converted units to %s"
#~ msgstr "[success] Converted units to %s"

#~ msgid "[WARNING_NOTCL] Export Code cancelled."
#~ msgstr "[WARNING_NOTCL] Export Code cancelled."

#~ msgid "[success] Origin set ..."
#~ msgstr "[success] Origin set ..."

#~ msgid "[success] Skew on X axis done."
#~ msgstr "[success] Skew on X axis done."

#~ msgid "[success] Skew on Y axis done."
#~ msgstr "[success] Skew on Y axis done."

#~ msgid "[success] New Grid added ..."
#~ msgstr "[success] New Grid added ..."

#~ msgid "[WARNING_NOTCL] Open Gerber cancelled."
#~ msgstr "[WARNING_NOTCL] Open Gerber cancelled."

#~ msgid "[WARNING_NOTCL] Open G-Code cancelled."
#~ msgstr "[WARNING_NOTCL] Open G-Code cancelled."

#~ msgid "[WARNING_NOTCL] Open Project cancelled."
#~ msgstr "[WARNING_NOTCL] Open Project cancelled."

#~ msgid "[WARNING_NOTCL] Open Config cancelled."
#~ msgstr "[WARNING_NOTCL] Open Config cancelled."

#~ msgid "[WARNING_NOTCL] No object selected."
#~ msgstr "[WARNING_NOTCL] No object selected."

#~ msgid "[WARNING_NOTCL] Export SVG cancelled."
#~ msgstr "[WARNING_NOTCL] Export SVG cancelled."

#~ msgid "[WARNING_NOTCL] Export Excellon cancelled."
#~ msgstr "[WARNING_NOTCL] Export Excellon cancelled."

#~ msgid "[WARNING_NOTCL] Export Gerber cancelled."
#~ msgstr "[WARNING_NOTCL] Export Gerber cancelled."

#~ msgid "[WARNING_NOTCL] Export DXF cancelled."
#~ msgstr "[WARNING_NOTCL] Export DXF cancelled."

#~ msgid "[WARNING_NOTCL] Open SVG cancelled."
#~ msgstr "[WARNING_NOTCL] Open SVG cancelled."

#~ msgid "[WARNING_NOTCL] Open DXF cancelled."
#~ msgstr "[WARNING_NOTCL] Open DXF cancelled."

#~ msgid "[WARNING_NOTCL] No object Box. Using instead %s"
#~ msgstr "[WARNING_NOTCL] No object Box. Using instead %s"

#~ msgid "[ERROR_NOTCL] Failed to parse file: {name}. {error}"
#~ msgstr "[ERROR_NOTCL] Failed to parse file: {name}. {error}"

#~ msgid "[ERROR_NOTCL] An internal error has occurred. See shell.\n"
#~ msgstr "[ERROR_NOTCL] An internal error has occurred. See shell.\n"

#~ msgid "[ERROR_NOTCL] Failed to verify project file: %s. Retry to save it."
#~ msgstr "[ERROR_NOTCL] Failed to verify project file: %s. Retry to save it."

#~ msgid ""
#~ "[ERROR_NOTCL] Failed to parse saved project file: %s. Retry to save it."
#~ msgstr ""
#~ "[ERROR_NOTCL] Failed to parse saved project file: %s. Retry to save it."

#~ msgid "[ERROR_NOTCL] Failed to save project file: %s. Retry to save it."
#~ msgstr "[ERROR_NOTCL] Failed to save project file: %s. Retry to save it."

#~ msgid "[ERROR_NOTCL] Wrong value format entered, use a number."
#~ msgstr "[ERROR_NOTCL] Wrong value format entered, use a number."

#~ msgid "[ERROR_NOTCL] Cancelled. Empty file, it has no geometry..."
#~ msgstr "[ERROR_NOTCL] Cancelled. Empty file, it has no geometry..."

#~ msgid "[WARNING_NOTCL] Export Machine Code cancelled ..."
#~ msgstr "[WARNING_NOTCL] Export Machine Code cancelled ..."

#~ msgid "[WARNING_NOTCL] No such file or directory"
#~ msgstr "[WARNING_NOTCL] No such file or directory"

#~ msgid "[ERROR_NOTCL] The value is mistyped. Check the value. %s"
#~ msgstr "[ERROR_NOTCL] The value is mistyped. Check the value. %s"

#~ msgid "[ERROR_NOTCL] Cancelled."
#~ msgstr "[ERROR_NOTCL] Cancelled."

#~ msgid "Tool Dia:"
#~ msgstr "Tool Dia:"

#~ msgid "Nr of drills:"
#~ msgstr "Nr of drills:"

#~ msgid "Direction:"
#~ msgstr "Direction:"

#~ msgid "Pitch:"
#~ msgstr "Pitch:"

#~ msgid "Length:"
#~ msgstr "Length:"

#~ msgid "Nr of slots:"
#~ msgstr "Nr of slots:"

#~ msgid "[success] Deleted tool with dia: {del_dia} {units}"
#~ msgstr "[success] Deleted tool with dia: {del_dia} {units}"

#~ msgid "Tool dia:"
#~ msgstr "Tool dia:"

#~ msgid "Overlap Rate:"
#~ msgstr "Overlap Rate:"

#~ msgid "Method:"
#~ msgstr "Method:"

#~ msgid "[ERROR_NOTCL] Wrong value format entered for Rotate, use a number."
#~ msgstr "[ERROR_NOTCL] Wrong value format entered for Rotate, use a number."

#~ msgid "[ERROR_NOTCL] Wrong value format entered for Skew X, use a number."
#~ msgstr "[ERROR_NOTCL] Wrong value format entered for Skew X, use a number."

#~ msgid "[ERROR_NOTCL] Wrong value format entered for Skew Y, use a number."
#~ msgstr "[ERROR_NOTCL] Wrong value format entered for Skew Y, use a number."

#~ msgid "[ERROR_NOTCL] Wrong value format entered for Scale X, use a number."
#~ msgstr "[ERROR_NOTCL] Wrong value format entered for Scale X, use a number."

#~ msgid "[ERROR_NOTCL] Wrong value format entered for Scale Y, use a number."
#~ msgstr "[ERROR_NOTCL] Wrong value format entered for Scale Y, use a number."

#~ msgid "[ERROR_NOTCL] Wrong value format entered for Offset X, use a number."
#~ msgstr ""
#~ "[ERROR_NOTCL] Wrong value format entered for Offset X, use a number."

#~ msgid "[ERROR_NOTCL] Wrong value format entered for Offset Y, use a number."
#~ msgstr ""
#~ "[ERROR_NOTCL] Wrong value format entered for Offset Y, use a number."

#~ msgid "[success] Flip on the Y axis done ..."
#~ msgstr "[success] Flip on the Y axis done ..."

#~ msgid "[success] Flip on the X axis done ..."
#~ msgstr "[success] Flip on the X axis done ..."

#~ msgid "[success] Offset on the %s axis done ..."
#~ msgstr "[success] Offset on the %s axis done ..."

#~ msgid ""
#~ "[WARNING_NOTCL] Editing MultiGeo Geometry, tool: {tool} with diameter: "
#~ "{dia}"
#~ msgstr ""
#~ "[WARNING_NOTCL] Editing MultiGeo Geometry, tool: {tool} with diameter: "
#~ "{dia}"

#~ msgid "Clear GUI Settings:"
#~ msgstr "Clear GUI Settings:"

#~ msgid "Duration:"
#~ msgstr "Duration:"

#~ msgid "Fast Plunge:"
#~ msgstr "Fast Plunge:"

#~ msgid "Linear Dir.:"
#~ msgstr "Linear Dir.:"

#~ msgid "Plot kind:"
#~ msgstr "Plot kind:"

#~ msgid ""
#~ "Select from the Tools Table above\n"
#~ "the tools you want to include."
#~ msgstr ""
#~ "Select from the Tools Table above\n"
#~ "the tools you want to include."

#~ msgid ""
#~ "[WARNING_NOTCL] Tool Diameter is zero value. Change it to a positive real "
#~ "number."
#~ msgstr ""
#~ "[WARNING_NOTCL] Tool Diameter is zero value. Change it to a positive real "
#~ "number."

#~ msgid "[success] Gerber %s was mirrored..."
#~ msgstr "[success] Gerber %s was mirrored..."

#~ msgid "[success] Excellon %s was mirrored..."
#~ msgstr "[success] Excellon %s was mirrored..."

#~ msgid "[success] Geometry %s was mirrored..."
#~ msgstr "[success] Geometry %s was mirrored..."

#~ msgid "[WARNING_NOTCL] No object(s) selected."
#~ msgstr "[WARNING_NOTCL] No object(s) selected."

#~ msgid "[success] %s object was moved ..."
#~ msgstr "[success] %s object was moved ..."

#~ msgid "[WARNING_NOTCL] Object(s) not selected"
#~ msgstr "[WARNING_NOTCL] Object(s) not selected"

#~ msgid "[WARNING_NOTCL] Buffering ..."
#~ msgstr "[WARNING_NOTCL] Buffering ..."

#~ msgid "[success] Non-Copper Clearing with ToolDia = %s started."
#~ msgstr "[success] Non-Copper Clearing with ToolDia = %s started."

#~ msgid "[ERROR_NOTCL] NCCTool.clear_non_copper() --> %s"
#~ msgstr "[ERROR_NOTCL] NCCTool.clear_non_copper() --> %s"

#~ msgid "[success] NCC Tool finished."
#~ msgstr "[success] NCC Tool finished."

#~ msgid ""
#~ "[WARNING_NOTCL] NCC Tool finished but some PCB features could not be "
#~ "cleared. Check the result."
#~ msgstr ""
#~ "[WARNING_NOTCL] NCC Tool finished but some PCB features could not be "
#~ "cleared. Check the result."

#~ msgid "[success] Non-Copper Rest Clearing with ToolDia = %s started."
#~ msgstr "[success] Non-Copper Rest Clearing with ToolDia = %s started."

#~ msgid "[ERROR_NOTCL] NCCTool.clear_non_copper_rest() --> %s"
#~ msgstr "[ERROR_NOTCL] NCCTool.clear_non_copper_rest() --> %s"

#~ msgid ""
#~ "[ERROR_NOTCL] NCC Tool finished but could not clear the object with "
#~ "current settings."
#~ msgstr ""
#~ "[ERROR_NOTCL] NCC Tool finished but could not clear the object with "
#~ "current settings."

#~ msgid "[WARNING_NOTCL] Open PDF cancelled."
#~ msgstr "[WARNING_NOTCL] Open PDF cancelled."

#~ msgid "[ERROR_NOTCL] Open PDF file failed."
#~ msgstr "[ERROR_NOTCL] Open PDF file failed."

#~ msgid "[success] Rendered: %s"
#~ msgstr "[success] Rendered: %s"

#~ msgid ""
#~ "How to select the polygons to paint.<BR>Options:<BR>- <B>Single Polygons</"
#~ "B>: left mouse click on the polygon to be painted.<BR>- <B>Area "
#~ "Selection</B>: left mouse click to start selection of the area to be "
#~ "painted.<BR>- <B>All Polygons</B>: paint all polygons.<BR>- <B>Reference "
#~ "Object</B>: paint an area described by an external reference object."
#~ msgstr ""
#~ "How to select the polygons to paint.<BR>Options:<BR>- <B>Single Polygons</"
#~ "B>: left mouse click on the polygon to be painted.<BR>- <B>Area "
#~ "Selection</B>: left mouse click to start selection of the area to be "
#~ "painted.<BR>- <B>All Polygons</B>: paint all polygons.<BR>- <B>Reference "
#~ "Object</B>: paint an area described by an external reference object."

#~ msgid ""
#~ "[ERROR_NOTCL] There is no Painting Geometry in the file.\n"
#~ "Usually it means that the tool diameter is too big for the painted "
#~ "geometry.\n"
#~ "Change the painting parameters and try again."
#~ msgstr ""
#~ "[ERROR_NOTCL] There is no Painting Geometry in the file.\n"
#~ "Usually it means that the tool diameter is too big for the painted "
#~ "geometry.\n"
#~ "Change the painting parameters and try again."

#~ msgid "[WARNING_NOTCL]No object Box. Using instead %s"
#~ msgstr "[WARNING_NOTCL]No object Box. Using instead %s"

#~ msgid "[success] Imported: %s"
#~ msgstr "[success] Imported: %s"

#~ msgid "[ERROR_NOTCL] Generating new object failed."
#~ msgstr "[ERROR_NOTCL] Generating new object failed."

#~ msgid "[success] Created: %s"
#~ msgstr "[success] Created: %s"

#~ msgid "[success] Rotate done ..."
#~ msgstr "[success] Rotate done ..."

#~ msgid ""
#~ "When choosing the 'Itself' option the non copper clearing extent\n"
#~ "is based on the object that is copper cleared.\n"
#~ " Choosing the 'Box' option will do non copper clearing within the box\n"
#~ "specified by another object different than the one that is copper cleared."
#~ msgstr ""
#~ "When choosing the 'Itself' option the non copper clearing extent\n"
#~ "is based on the object that is copper cleared.\n"
#~ " Choosing the 'Box' option will do non copper clearing within the box\n"
#~ "specified by another object different than the one that is copper cleared."

#~ msgid ""
#~ "How to select the polygons to paint.<BR>Options:<BR>- <B>Single</B>: left "
#~ "mouse click on the polygon to be painted.<BR>- <B>Area</B>: left mouse "
#~ "click to start selection of the area to be painted.<BR>- <B>All</B>: "
#~ "paint all polygons.<BR>- <B>Ref</B>: paint an area described by an "
#~ "external reference object."
#~ msgstr ""
#~ "How to select the polygons to paint.<BR>Options:<BR>- <B>Single</B>: left "
#~ "mouse click on the polygon to be painted.<BR>- <B>Area</B>: left mouse "
#~ "click to start selection of the area to be painted.<BR>- <B>All</B>: "
#~ "paint all polygons.<BR>- <B>Ref</B>: paint an area described by an "
#~ "external reference object."

#~ msgid "Geometry object to be painted.                        "
#~ msgstr "Geometry object to be painted.                        "

#~ msgid ""
#~ "After clicking here, click inside<BR>the polygon you wish to be painted "
#~ "if <B>Single</B> is selected.<BR>If <B>Area</B> is selected, then the "
#~ "selection of the area to be painted<BR>will be initiated by a first click "
#~ "and finished by the second mouse click.<BR>If <B>All</B>  is selected "
#~ "then the Paint will start after click.<BR>If <B>Ref</B>  is selected then "
#~ "the Paint will start after click,<BR>and the painted area will be "
#~ "described by a selected object.<BR>A new Geometry object with the tool "
#~ "paths will be created."
#~ msgstr ""
#~ "After clicking here, click inside<BR>the polygon you wish to be painted "
#~ "if <B>Single</B> is selected.<BR>If <B>Area</B> is selected, then the "
#~ "selection of the area to be painted<BR>will be initiated by a first click "
#~ "and finished by the second mouse click.<BR>If <B>All</B>  is selected "
#~ "then the Paint will start after click.<BR>If <B>Ref</B>  is selected then "
#~ "the Paint will start after click,<BR>and the painted area will be "
#~ "described by a selected object.<BR>A new Geometry object with the tool "
#~ "paths will be created."

#~ msgid "<b>Apertures:</b>"
#~ msgstr "<b>Apertures:</b>"

#~ msgid "Aperture Code:"
#~ msgstr "Aperture Code:"

#~ msgid "<b>Languages:</b>"
#~ msgstr "<b>Languages:</b>"

#~ msgid "Width (# passes):"
#~ msgstr "Width (# passes):"

#~| msgid "<b>Clear non-copper:</b>"
#~ msgid "Clear non-copper"
#~ msgstr "Clear non-copper"

#~ msgid "Rounded corners"
#~ msgstr "Rounded corners"

#~ msgid ""
#~ "Creates a Geometry objects with polygons\n"
#~ "covering the copper-free areas of the PCB."
#~ msgstr ""
#~ "Creates a Geometry objects with polygons\n"
#~ "covering the copper-free areas of the PCB."

#~ msgid "<b>Bounding Box:</b>"
#~ msgstr "<b>Bounding Box:</b>"

#~ msgid "<b>Units</b>:"
#~ msgstr "<b>Units</b>:"

#~ msgid "<b>Zeros</b>:"
#~ msgstr "<b>Zeros</b>:"

#~ msgid "INCH:"
#~ msgstr "INCH:"

#~ msgid "Tool change:"
#~ msgstr "Tool change:"

#~ msgid "Toolchange Z position."
#~ msgstr "Toolchange Z position."

#~ msgid ""
#~ "Tool speed while drilling\n"
#~ "(in units per minute)."
#~ msgstr ""
#~ "Tool speed while drilling\n"
#~ "(in units per minute)."

#~ msgid "<b>Gcode:    </b>"
#~ msgstr "<b>Gcode:    </b>"

#~ msgid "Offset Z:"
#~ msgstr "Offset Z:"

#~ msgid "<b>Slots:</b>"
#~ msgstr "<b>Slots:</b>"

#~ msgid "<b>Create CNC Job:</b>"
#~ msgstr "<b>Create CNC Job:</b>"

#~ msgid "Multidepth"
#~ msgstr "Multidepth"

#~ msgid "Multidepth usage: True or False."
#~ msgstr "Multidepth usage: True or False."

#~ msgid ""
#~ "The preprocessor file that dictates\n"
#~ "Machine Code output."
#~ msgstr ""
#~ "The preprocessor file that dictates\n"
#~ "Machine Code output."

#~ msgid "Display Annotation:"
#~ msgstr "Display Annotation:"

#~ msgid ""
#~ "Type here any G-Code commands you would\n"
#~ "like to be executed when Toolchange event is encountered.\n"
#~ "This will constitute a Custom Toolchange GCode,\n"
#~ "or a Toolchange Macro."
#~ msgstr ""
#~ "Type here any G-Code commands you would\n"
#~ "like to be executed when Toolchange event is encountered.\n"
#~ "This will constitute a Custom Toolchange GCode,\n"
#~ "or a Toolchange Macro."

#~ msgid ""
#~ "If checked, use 'rest machining'.\n"
#~ "Basically it will clear copper outside PCB features,\n"
#~ "using the biggest tool and continue with the next tools,\n"
#~ "from bigger to smaller, to clear areas of copper that\n"
#~ "could not be cleared by previous tool.\n"
#~ "If not checked, use the standard algorithm."
#~ msgstr ""
#~ "If checked, use 'rest machining'.\n"
#~ "Basically it will clear copper outside PCB features,\n"
#~ "using the biggest tool and continue with the next tools,\n"
#~ "from bigger to smaller, to clear areas of copper that\n"
#~ "could not be cleared by previous tool.\n"
#~ "If not checked, use the standard algorithm."

#~ msgid "Offset:"
#~ msgstr "Offset:"

#~ msgid ""
#~ "Distance from objects at which\n"
#~ "to draw the cutout."
#~ msgstr ""
#~ "Distance from objects at which\n"
#~ "to draw the cutout."

#~ msgid ""
#~ "Size of the gaps in the toolpath\n"
#~ "that will remain to hold the\n"
#~ "board in place."
#~ msgstr ""
#~ "Size of the gaps in the toolpath\n"
#~ "that will remain to hold the\n"
#~ "board in place."

#~ msgid "Create a convex shape surrounding the entire PCB."
#~ msgstr "Create a convex shape surrounding the entire PCB."

#~ msgid ""
#~ "The axis should pass through a <b>point</b> or cut\n"
#~ " a specified <b>box</b> (in a Geometry object) in \n"
#~ "the middle."
#~ msgstr ""
#~ "The axis should pass through a <b>point</b> or cut\n"
#~ " a specified <b>box</b> (in a Geometry object) in \n"
#~ "the middle."

#~ msgid "Panel Type:"
#~ msgstr "Panel Type:"

#~ msgid "Tip angle:"
#~ msgstr "Tip angle:"

#~ msgid "Angle for rotation. In degrees."
#~ msgstr "Angle for rotation. In degrees."

#~ msgid "Angle for Skew/Shear on X axis. In degrees."
#~ msgstr "Angle for Skew/Shear on X axis. In degrees."

#~ msgid "Angle for Skew/Shear on Y axis. In degrees."
#~ msgstr "Angle for Skew/Shear on Y axis. In degrees."

#~ msgid "XY Toolchange:"
#~ msgstr "XY Toolchange:"

#~ msgid "PostProcessors:"
#~ msgstr "PostProcessors:"

#~ msgid "<b>Scale:</b>"
#~ msgstr "<b>Scale:</b>"

#~ msgid "<b>Offset:</b>"
#~ msgstr "<b>Offset:</b>"

#~ msgid "<b>Tools Table</b>"
#~ msgstr "<b>Tools Table</b>"

#~ msgid ""
#~ "Tool height just before starting the work.\n"
#~ "Delete the value if you don't need this feature."
#~ msgstr ""
#~ "Tool height just before starting the work.\n"
#~ "Delete the value if you don't need this feature."

#~ msgid ""
#~ "Z-axis position (height) for\n"
#~ "the last move."
#~ msgstr ""
#~ "Z-axis position (height) for\n"
#~ "the last move."

#~ msgid ""
#~ "The json file that dictates\n"
#~ "gcode output."
#~ msgstr ""
#~ "The json file that dictates\n"
#~ "gcode output."

#~ msgid "<b>Type:    </b>"
#~ msgstr "<b>Type:    </b>"

#~ msgid "Drills Tool dia:"
#~ msgstr "Drills Tool dia:"

#~ msgid "Slots Tool dia:"
#~ msgstr "Slots Tool dia:"

#~ msgid "<b>Tool Dia:</b>"
#~ msgstr "<b>Tool Dia:</b>"

#~ msgid "<b>Tool Data</b>"
#~ msgstr "<b>Tool Data</b>"

#~ msgid ""
#~ "This is the height (Z) at which the CNC\n"
#~ "will go as the last move."
#~ msgstr ""
#~ "This is the height (Z) at which the CNC\n"
#~ "will go as the last move."

#~ msgid "Feed Rate Z (Plunge):"
#~ msgstr "Feed Rate Z (Plunge):"

#~ msgid ""
#~ "Cutting speed in the Z\n"
#~ "plane in units per minute"
#~ msgstr ""
#~ "Cutting speed in the Z\n"
#~ "plane in units per minute"

#~ msgid ""
#~ "Cutting speed in the XY\n"
#~ "plane in units per minute\n"
#~ "(in units per minute).\n"
#~ "This is for the rapid move G00.\n"
#~ "It is useful only for Marlin,\n"
#~ "ignore for any other cases."
#~ msgstr ""
#~ "Cutting speed in the XY\n"
#~ "plane in units per minute\n"
#~ "(in units per minute).\n"
#~ "This is for the rapid move G00.\n"
#~ "It is useful only for Marlin,\n"
#~ "ignore for any other cases."

#~ msgid "Cut over 1st pt"
#~ msgstr "Cut over 1st pt"

#~ msgid "<b>Paint Area:</b>"
#~ msgstr "<b>Paint Area:</b>"

#~ msgid "<b>CNC Tools Table</b>"
#~ msgstr "<b>CNC Tools Table</b>"

#~ msgid ""
#~ "Type here any G-Code commands you would\n"
#~ "like to add to the beginning of the generated file."
#~ msgstr ""
#~ "Type here any G-Code commands you would\n"
#~ "like to add to the beginning of the generated file."

#~ msgid ""
#~ "This is the diameter of the tool tip.\n"
#~ "The manufacturer specifies it."
#~ msgstr ""
#~ "This is the diameter of the tool tip.\n"
#~ "The manufacturer specifies it."

#~ msgid "Object:"
#~ msgstr "Object:"

#~ msgid "Units:"
#~ msgstr "Units:"

#~ msgid ""
#~ "- 'Itself': the non copper clearing extent\n"
#~ "is based on the object that is copper cleared.\n"
#~ " - 'Box': will do non copper clearing within the box\n"
#~ "specified by the object selected in the Ref. Object combobox."
#~ msgstr ""
#~ "- 'Itself': the non copper clearing extent\n"
#~ "is based on the object that is copper cleared.\n"
#~ " - 'Box': will do non copper clearing within the box\n"
#~ "specified by the object selected in the Ref. Object combobox."

#~ msgid "Geometry:"
#~ msgstr "Geometry:"

#~ msgid ""
#~ "Scale the selected object(s)\n"
#~ "using the Scale Factor X for both axis."
#~ msgstr ""
#~ "Scale the selected object(s)\n"
#~ "using the Scale Factor X for both axis."

#~ msgid "<b>Excellon Format:</b>"
#~ msgstr "<b>Excellon Format:</b>"

#~ msgid "<b>Tools:</b>"
#~ msgstr "<b>Tools:</b>"

#~ msgid "<b>Export G-Code:</b>"
#~ msgstr "<b>Export G-Code:</b>"

#~ msgid "How to select the polygons to paint."
#~ msgstr "How to select the polygons to paint."

#~ msgid "<b>V-Shape Tool Calculator:</b>"
#~ msgstr "<b>V-Shape Tool Calculator:</b>"

#~ msgid "<b>ElectroPlating Calculator:</b>"
#~ msgstr "<b>ElectroPlating Calculator:</b>"

#~ msgid "<b>Name:</b>"
#~ msgstr "<b>Name:</b>"

#~ msgid "<b>Plot kind:</b>"
#~ msgstr "<b>Plot kind:</b>"

#~ msgid "<b>Display Annotation:</b>"
#~ msgstr "<b>Display Annotation:</b>"

#~ msgid "<b>GERBER:</b>"
#~ msgstr "<b>GERBER:</b>"

#~ msgid "<b>EXCELLON:</b>"
#~ msgstr "<b>EXCELLON:</b>"

#~ msgid "<b>GEOMETRY</b>:"
#~ msgstr "<b>GEOMETRY</b>:"

#~ msgid "<b>Panel Type:</b>"
#~ msgstr "<b>Panel Type:</b>"

#~ msgid "<b>Excellon format:</b>"
#~ msgstr "<b>Excellon format:</b>"

#~ msgid "<b>Gerber Objects</b>"
#~ msgstr "<b>Gerber Objects</b>"

#~ msgid "<b>Geometry Objects</b>"
#~ msgstr "<b>Geometry Objects</b>"

#~ msgid "Save &Defaults"
#~ msgstr "Save &Defaults"

#~ msgid "Tool dia:                   "
#~ msgstr "Tool dia:                   "

#~ msgid ""
#~ "The diameter of the cutting\n"
#~ "tool.."
#~ msgstr ""
#~ "The diameter of the cutting\n"
#~ "tool.."

#~ msgid "[WARNING_NOTCL] Move cancelled. No shape selected."
#~ msgstr "[WARNING_NOTCL] Move cancelled. No shape selected."

#~ msgid "Copy as &Geom"
#~ msgstr "Copy as &Geom"

#~ msgid ""
#~ "Change the size of the selected apertures.\n"
#~ "Factor by which to multiply\n"
#~ "geometric features of this object."
#~ msgstr ""
#~ "Change the size of the selected apertures.\n"
#~ "Factor by which to multiply\n"
#~ "geometric features of this object."

#~ msgid "Ap. Buffer Factor:"
#~ msgstr "Ap. Buffer Factor:"

#~ msgid ""
#~ "Change the size of the selected apertures.\n"
#~ "Factor by which to expand/shrink\n"
#~ "geometric features of this object."
#~ msgstr ""
#~ "Change the size of the selected apertures.\n"
#~ "Factor by which to expand/shrink\n"
#~ "geometric features of this object."

#~ msgid "Out"
#~ msgstr "Out"

#~ msgid "Pos"
#~ msgstr "Pos"

#~ msgid "Neg"
#~ msgstr "Neg"

#~ msgid "Solid   "
#~ msgstr "Solid   "

#~ msgid "M-Color   "
#~ msgstr "M-Color   "

#~ msgid "Click on CENTER ..."
#~ msgstr "Click on CENTER ..."

#~ msgid "[success] Done. Region completed."
#~ msgstr "[success] Done. Region completed."

#~ msgid "Del Aperture:"
#~ msgstr "Del Aperture:"

#~ msgid ""
#~ "Delete a aperture in the aperture list.\n"
#~ "It will delete also the associated geometry."
#~ msgstr ""
#~ "Delete a aperture in the aperture list.\n"
#~ "It will delete also the associated geometry."

#~ msgid "Save && Close Edit"
#~ msgstr "Save && Close Edit"

#~ msgid ""
#~ "<b>Editor Shortcut list</b><br>\n"
#~ "            <br>\n"
#~ "            <strong><span style=\"color:#0000ff\">GEOMETRY EDITOR</span></"
#~ "strong><br>\n"
#~ "    \n"
#~ "            <table border=\"0\" cellpadding=\"0\" cellspacing=\"0\" style="
#~ "\"width:283px\">\n"
#~ "                <tbody>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\" width=\"89\"><strong>A</"
#~ "strong></td>\n"
#~ "                        <td width=\"194\">&nbsp;Draw an Arc</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>B</strong></td>\n"
#~ "                        <td>&nbsp;Buffer Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>C</strong></td>\n"
#~ "                        <td>&nbsp;Copy Geo Item</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>E</strong></td>\n"
#~ "                        <td>&nbsp;Polygon Intersection Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>I</strong></td>\n"
#~ "                        <td>&nbsp;Paint Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>J</strong></td>\n"
#~ "                        <td>&nbsp;Jump to Location (x, y)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>K</strong></td>\n"
#~ "                        <td>&nbsp;Toggle Corner Snap</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>M</strong></td>\n"
#~ "                        <td>&nbsp;Move Geo Item</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>N</strong></td>\n"
#~ "                        <td>&nbsp;Draw a Polygon</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>O</strong></td>\n"
#~ "                        <td>&nbsp;Draw a Circle</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>P</strong></td>\n"
#~ "                        <td>&nbsp;Draw a Path</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>R</strong></td>\n"
#~ "                        <td>&nbsp;Draw Rectangle</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>S</strong></td>\n"
#~ "                        <td>&nbsp;Polygon Substraction Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>T</strong></td>\n"
#~ "                        <td>&nbsp;Add Text Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>U</strong></td>\n"
#~ "                        <td>&nbsp;Polygon Union Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>X</strong></td>\n"
#~ "                        <td>&nbsp;Flip shape on X axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Y</strong></td>\n"
#~ "                        <td>&nbsp;Flip shape on Y axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Shift+X</strong></td>\n"
#~ "                        <td>&nbsp;Skew shape on X axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Shift+Y</strong></td>\n"
#~ "                        <td>&nbsp;Skew shape on Y axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Alt+R</strong></td>\n"
#~ "                        <td>&nbsp;Editor Transformation Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Alt+X</strong></td>\n"
#~ "                        <td>&nbsp;Offset shape on X axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Alt+Y</strong></td>\n"
#~ "                        <td>&nbsp;Offset shape on Y axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Ctrl+M</strong></td>\n"
#~ "                        <td>&nbsp;Measurement Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Ctrl+S</strong></td>\n"
#~ "                        <td>&nbsp;Save Object and Exit Editor</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Ctrl+X</strong></td>\n"
#~ "                        <td>&nbsp;Polygon Cut Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Space</strong></td>\n"
#~ "                        <td>&nbsp;Rotate Geometry</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ENTER</strong></td>\n"
#~ "                        <td>&nbsp;Finish drawing for certain tools</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ESC</strong></td>\n"
#~ "                        <td>&nbsp;Abort and return to Select</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Del</strong></td>\n"
#~ "                        <td>&nbsp;Delete Shape</td>\n"
#~ "                    </tr>\n"
#~ "                </tbody>\n"
#~ "            </table>\n"
#~ "            <br>\n"
#~ "            <br>\n"
#~ "            <strong><span style=\"color:#ff0000\">EXCELLON EDITOR</span></"
#~ "strong><br>\n"
#~ "            <table border=\"0\" cellpadding=\"0\" cellspacing=\"0\" style="
#~ "\"width:283px\">\n"
#~ "                <tbody>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\" width=\"89\"><strong>A</"
#~ "strong></td>\n"
#~ "                        <td width=\"194\">&nbsp;Add Drill Array</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>C</strong></td>\n"
#~ "                        <td>&nbsp;Copy Drill(s)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>D</strong></td>\n"
#~ "                        <td>&nbsp;Add Drill</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>J</strong></td>\n"
#~ "                        <td>&nbsp;Jump to Location (x, y)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>M</strong></td>\n"
#~ "                        <td>&nbsp;Move Drill(s)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>R</strong></td>\n"
#~ "                        <td>&nbsp;Resize Drill(s)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>T</strong></td>\n"
#~ "                        <td>&nbsp;Add a new Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Del</strong></td>\n"
#~ "                        <td>&nbsp;Delete Drill(s)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Del</strong></td>\n"
#~ "                        <td>&nbsp;Alternate: Delete Tool(s)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ESC</strong></td>\n"
#~ "                        <td>&nbsp;Abort and return to Select</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Ctrl+S</strong></td>\n"
#~ "                        <td>&nbsp;Save Object and Exit Editor</td>\n"
#~ "                    </tr>\n"
#~ "                </tbody>\n"
#~ "            </table>\n"
#~ "                    "
#~ msgstr ""
#~ "<b>Editor Shortcut list</b><br>\n"
#~ "            <br>\n"
#~ "            <strong><span style=\"color:#0000ff\">GEOMETRY EDITOR</span></"
#~ "strong><br>\n"
#~ "    \n"
#~ "            <table border=\"0\" cellpadding=\"0\" cellspacing=\"0\" style="
#~ "\"width:283px\">\n"
#~ "                <tbody>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\" width=\"89\"><strong>A</"
#~ "strong></td>\n"
#~ "                        <td width=\"194\">&nbsp;Draw an Arc</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>B</strong></td>\n"
#~ "                        <td>&nbsp;Buffer Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>C</strong></td>\n"
#~ "                        <td>&nbsp;Copy Geo Item</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>E</strong></td>\n"
#~ "                        <td>&nbsp;Polygon Intersection Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>I</strong></td>\n"
#~ "                        <td>&nbsp;Paint Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>J</strong></td>\n"
#~ "                        <td>&nbsp;Jump to Location (x, y)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>K</strong></td>\n"
#~ "                        <td>&nbsp;Toggle Corner Snap</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>M</strong></td>\n"
#~ "                        <td>&nbsp;Move Geo Item</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>N</strong></td>\n"
#~ "                        <td>&nbsp;Draw a Polygon</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>O</strong></td>\n"
#~ "                        <td>&nbsp;Draw a Circle</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>P</strong></td>\n"
#~ "                        <td>&nbsp;Draw a Path</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>R</strong></td>\n"
#~ "                        <td>&nbsp;Draw Rectangle</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>S</strong></td>\n"
#~ "                        <td>&nbsp;Polygon Substraction Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>T</strong></td>\n"
#~ "                        <td>&nbsp;Add Text Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>U</strong></td>\n"
#~ "                        <td>&nbsp;Polygon Union Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>X</strong></td>\n"
#~ "                        <td>&nbsp;Flip shape on X axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Y</strong></td>\n"
#~ "                        <td>&nbsp;Flip shape on Y axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Shift+X</strong></td>\n"
#~ "                        <td>&nbsp;Skew shape on X axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Shift+Y</strong></td>\n"
#~ "                        <td>&nbsp;Skew shape on Y axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Alt+R</strong></td>\n"
#~ "                        <td>&nbsp;Editor Transformation Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Alt+X</strong></td>\n"
#~ "                        <td>&nbsp;Offset shape on X axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Alt+Y</strong></td>\n"
#~ "                        <td>&nbsp;Offset shape on Y axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Ctrl+M</strong></td>\n"
#~ "                        <td>&nbsp;Measurement Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Ctrl+S</strong></td>\n"
#~ "                        <td>&nbsp;Save Object and Exit Editor</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Ctrl+X</strong></td>\n"
#~ "                        <td>&nbsp;Polygon Cut Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Space</strong></td>\n"
#~ "                        <td>&nbsp;Rotate Geometry</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ENTER</strong></td>\n"
#~ "                        <td>&nbsp;Finish drawing for certain tools</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ESC</strong></td>\n"
#~ "                        <td>&nbsp;Abort and return to Select</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Del</strong></td>\n"
#~ "                        <td>&nbsp;Delete Shape</td>\n"
#~ "                    </tr>\n"
#~ "                </tbody>\n"
#~ "            </table>\n"
#~ "            <br>\n"
#~ "            <br>\n"
#~ "            <strong><span style=\"color:#ff0000\">EXCELLON EDITOR</span></"
#~ "strong><br>\n"
#~ "            <table border=\"0\" cellpadding=\"0\" cellspacing=\"0\" style="
#~ "\"width:283px\">\n"
#~ "                <tbody>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\" width=\"89\"><strong>A</"
#~ "strong></td>\n"
#~ "                        <td width=\"194\">&nbsp;Add Drill Array</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>C</strong></td>\n"
#~ "                        <td>&nbsp;Copy Drill(s)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>D</strong></td>\n"
#~ "                        <td>&nbsp;Add Drill</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>J</strong></td>\n"
#~ "                        <td>&nbsp;Jump to Location (x, y)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>M</strong></td>\n"
#~ "                        <td>&nbsp;Move Drill(s)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>R</strong></td>\n"
#~ "                        <td>&nbsp;Resize Drill(s)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>T</strong></td>\n"
#~ "                        <td>&nbsp;Add a new Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Del</strong></td>\n"
#~ "                        <td>&nbsp;Delete Drill(s)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Del</strong></td>\n"
#~ "                        <td>&nbsp;Alternate: Delete Tool(s)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ESC</strong></td>\n"
#~ "                        <td>&nbsp;Abort and return to Select</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Ctrl+S</strong></td>\n"
#~ "                        <td>&nbsp;Save Object and Exit Editor</td>\n"
#~ "                    </tr>\n"
#~ "                </tbody>\n"
#~ "            </table>\n"
#~ "                    "

#~ msgid "[ERROR_NOTCL]Could not load defaults file."
#~ msgstr "[ERROR_NOTCL]Could not load defaults file."

#~ msgid ""
#~ "[ERROR_NOTCL] The aperture scale factor value is missing or wrong format."
#~ msgstr ""
#~ "[ERROR_NOTCL] The aperture scale factor value is missing or wrong format."

#~ msgid "[WARNING_NOTCL]Export Machine Code cancelled ..."
#~ msgstr "[WARNING_NOTCL]Export Machine Code cancelled ..."

#~ msgid "[success] GUI settings deleted ..."
#~ msgstr "[success] GUI settings deleted ..."

#~ msgid "Buffer Factor:"
#~ msgstr "Buffer Factor:"

#~ msgid "<b>Generate new Gerber Object:</b>"
#~ msgstr "<b>Generate new Gerber Object:</b>"

#~ msgid "Will generate a new Gerber object from the changed apertures."
#~ msgstr "Will generate a new Gerber object from the changed apertures."

#~ msgid ""
#~ "Will generate a new Gerber object from the changed apertures.\n"
#~ "This new object can then be isolated etc."
#~ msgstr ""
#~ "Will generate a new Gerber object from the changed apertures.\n"
#~ "This new object can then be isolated etc."

#~ msgid "[success]Offset on the %s axis done ..."
#~ msgstr "[success]Offset on the %s axis done ..."

#~ msgid ""
#~ "How much (fraction) of the tool width to overlap each tool pass.\n"
#~ "Example:\n"
#~ "A value here of 0.25 means 25\\% from the tool diameter found above.\n"
#~ "\n"
#~ "Adjust the value starting with lower values\n"
#~ "and increasing it if areas that should be painted are still \n"
#~ "not painted.\n"
#~ "Lower values = faster processing, faster execution on PCB.\n"
#~ "Higher values = slow processing and slow execution on CNC\n"
#~ "due of too many paths."
#~ msgstr ""
#~ "How much (fraction) of the tool width to overlap each tool pass.\n"
#~ "Example:\n"
#~ "A value here of 0.25 means 25\\% from the tool diameter found above.\n"
#~ "\n"
#~ "Adjust the value starting with lower values\n"
#~ "and increasing it if areas that should be painted are still \n"
#~ "not painted.\n"
#~ "Lower values = faster processing, faster execution on PCB.\n"
#~ "Higher values = slow processing and slow execution on CNC\n"
#~ "due of too many paths."

#~| msgid "z_toolchange = Z coord for Toolchange"
#~ msgid "z_move = Z coord for Toolchange"
#~ msgstr "z_move = Z coord for Toolchange"

#~ msgid "%s/Project_%s"
#~ msgstr "%s/Project_%s"

#~ msgid "tool_tab"
#~ msgstr "tool_tab"