FlatCAM/locale_template/strings.pot

# SOME DESCRIPTIVE TITLE.
# Copyright (C) YEAR ORGANIZATION
# FIRST AUTHOR <EMAIL@ADDRESS>, YEAR.
#
#, fuzzy
msgid ""
msgstr ""
"Project-Id-Version: \n"
"POT-Creation-Date: 2020-08-29 16:07+0300\n"
"PO-Revision-Date: 2019-03-25 15:08+0200\n"
"Last-Translator: \n"
"Language-Team: \n"
"Language: en\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Generated-By: pygettext.py 1.5\n"
"X-Generator: Poedit 2.3.1\n"
"Plural-Forms: nplurals=2; plural=(n != 1);\n"
"X-Poedit-Basepath: ..\n"
"X-Poedit-SearchPath-0: .\n"
"X-Poedit-SearchPathExcluded-0: build\n"
"X-Poedit-SearchPathExcluded-1: doc\n"
"X-Poedit-SearchPathExcluded-2: tests\n"

#: Bookmark.py:57 Bookmark.py:84
msgid "Title"
msgstr ""

#: Bookmark.py:58 Bookmark.py:88
msgid "Web Link"
msgstr ""

#: Bookmark.py:62
msgid ""
"Index.\n"
"The rows in gray color will populate the Bookmarks menu.\n"
"The number of gray colored rows is set in Preferences."
msgstr ""

#: Bookmark.py:66
msgid ""
"Description of the link that is set as an menu action.\n"
"Try to keep it short because it is installed as a menu item."
msgstr ""

#: Bookmark.py:69
msgid "Web Link. E.g: https://your_website.org "
msgstr ""

#: Bookmark.py:78
msgid "New Bookmark"
msgstr ""

#: Bookmark.py:97
msgid "Add Entry"
msgstr ""

#: Bookmark.py:98
msgid "Remove Entry"
msgstr ""

#: Bookmark.py:99
msgid "Export List"
msgstr ""

#: Bookmark.py:100
msgid "Import List"
msgstr ""

#: Bookmark.py:190
msgid "Title entry is empty."
msgstr ""

#: Bookmark.py:199
msgid "Web link entry is empty."
msgstr ""

#: Bookmark.py:207
msgid "Either the Title or the Weblink already in the table."
msgstr ""

#: Bookmark.py:227
msgid "Bookmark added."
msgstr ""

#: Bookmark.py:244
msgid "This bookmark can not be removed"
msgstr ""

#: Bookmark.py:275
msgid "Bookmark removed."
msgstr ""

#: Bookmark.py:290
msgid "Export Bookmarks"
msgstr ""

#: Bookmark.py:293 appGUI/MainGUI.py:524
msgid "Bookmarks"
msgstr ""

#: Bookmark.py:300 Bookmark.py:342 appDatabase.py:665 appDatabase.py:711 appDatabase.py:2998
#: appDatabase.py:3044 appEditors/AppExcEditor.py:1023 appEditors/AppExcEditor.py:1091
#: appEditors/AppTextEditor.py:263 appGUI/MainGUI.py:2878 appGUI/MainGUI.py:3100
#: appGUI/MainGUI.py:3315 appObjects/FlatCAMCNCJob.py:1589
#: appObjects/ObjectCollection.py:126 appTools/ToolFilm.py:234 appTools/ToolFilm.py:380
#: appTools/ToolImage.py:112 appTools/ToolMove.py:269 appTools/ToolPcbWizard.py:189
#: appTools/ToolPcbWizard.py:212 appTools/ToolQRCode.py:523 appTools/ToolQRCode.py:570
#: app_Main.py:1747 app_Main.py:2575 app_Main.py:2611 app_Main.py:2658 app_Main.py:4404
#: app_Main.py:7105 app_Main.py:7144 app_Main.py:7188 app_Main.py:7217 app_Main.py:7258
#: app_Main.py:7283 app_Main.py:7339 app_Main.py:7375 app_Main.py:7420 app_Main.py:7461
#: app_Main.py:7503 app_Main.py:7545 app_Main.py:7586 app_Main.py:7630 app_Main.py:7690
#: app_Main.py:7722 app_Main.py:7754 app_Main.py:7977 app_Main.py:8015 app_Main.py:8058
#: app_Main.py:8135 app_Main.py:8190
msgid "Cancelled."
msgstr ""

#: Bookmark.py:308 appDatabase.py:673 appDatabase.py:3006 appEditors/AppTextEditor.py:318
#: appObjects/FlatCAMCNCJob.py:1511 appObjects/FlatCAMCNCJob.py:2110
#: appTools/ToolFilm.py:509 appTools/ToolFilm.py:688 appTools/ToolSolderPaste.py:1097
#: app_Main.py:2666 app_Main.py:8434 app_Main.py:8482 app_Main.py:8611 app_Main.py:8748
#: app_Main.py:8816
msgid ""
"Permission denied, saving not possible.\n"
"Most likely another app is holding the file open and not accessible."
msgstr ""

#: Bookmark.py:319 Bookmark.py:349
msgid "Could not load bookmarks file."
msgstr ""

#: Bookmark.py:329
msgid "Failed to write bookmarks to file."
msgstr ""

#: Bookmark.py:331
msgid "Exported bookmarks to"
msgstr ""

#: Bookmark.py:337
msgid "Import Bookmarks"
msgstr ""

#: Bookmark.py:356
msgid "Imported Bookmarks from"
msgstr ""

#: appCommon/Common.py:46
msgid "The user requested a graceful exit of the current task."
msgstr ""

#: appCommon/Common.py:292 appTools/ToolCopperThieving.py:328 appTools/ToolIsolation.py:1398
#: appTools/ToolNCC.py:1316
msgid "Click the start point of the area."
msgstr ""

#: appCommon/Common.py:351 appTools/ToolNCC.py:1375 appTools/ToolPaint.py:1209
msgid "Click the end point of the area."
msgstr ""

#: appCommon/Common.py:357 appCommon/Common.py:459 appTools/ToolCopperThieving.py:385
#: appTools/ToolIsolation.py:2310 appTools/ToolIsolation.py:2362 appTools/ToolNCC.py:1381
#: appTools/ToolNCC.py:1433 appTools/ToolPaint.py:1215 appTools/ToolPaint.py:1266
msgid "Zone added. Click to start adding next zone or right click to finish."
msgstr ""

#: appCommon/Common.py:404 appEditors/AppGeoEditor.py:2352 appTools/ToolIsolation.py:2333
#: appTools/ToolNCC.py:1404 appTools/ToolPaint.py:1237
msgid "Click on next Point or click right mouse button to complete ..."
msgstr ""

#: appCommon/Common.py:490
msgid "Exclusion areas added. Checking overlap with the object geometry ..."
msgstr ""

#: appCommon/Common.py:496
msgid "Failed. Exclusion areas intersects the object geometry ..."
msgstr ""

#: appCommon/Common.py:499
msgid "Exclusion areas added."
msgstr ""

#: appCommon/Common.py:508 appCommon/Common.py:641 appCommon/Common.py:703
msgid "Generate the CNC Job object."
msgstr ""

#: appCommon/Common.py:508
msgid "With Exclusion areas."
msgstr ""

#: appCommon/Common.py:543
msgid "Cancelled. Area exclusion drawing was interrupted."
msgstr ""

#: appCommon/Common.py:651 appCommon/Common.py:706
msgid "All exclusion zones deleted."
msgstr ""

#: appCommon/Common.py:692
msgid "Selected exclusion zones deleted."
msgstr ""

#: appDatabase.py:88
msgid "Add Geometry Tool in DB"
msgstr ""

#: appDatabase.py:90 appDatabase.py:2224
msgid ""
"Add a new tool in the Tools Database.\n"
"It will be used in the Geometry UI.\n"
"You can edit it after it is added."
msgstr ""

#: appDatabase.py:104 appDatabase.py:2238
msgid "Delete Tool from DB"
msgstr ""

#: appDatabase.py:106 appDatabase.py:2241
msgid "Remove a selection of tools in the Tools Database."
msgstr ""

#: appDatabase.py:110 appDatabase.py:2245
msgid "Export DB"
msgstr ""

#: appDatabase.py:112 appDatabase.py:2248
msgid "Save the Tools Database to a custom text file."
msgstr ""

#: appDatabase.py:116 appDatabase.py:2252
msgid "Import DB"
msgstr ""

#: appDatabase.py:118 appDatabase.py:2255
msgid "Load the Tools Database information's from a custom text file."
msgstr ""

#: appDatabase.py:122 appDatabase.py:2266
msgid "Transfer the Tool"
msgstr ""

#: appDatabase.py:124
msgid ""
"Add a new tool in the Tools Table of the\n"
"active Geometry object after selecting a tool\n"
"in the Tools Database."
msgstr ""

#: appDatabase.py:130 appDatabase.py:2281 appGUI/MainGUI.py:1438
#: appGUI/preferences/PreferencesUIManager.py:922 app_Main.py:2291 app_Main.py:3386
#: app_Main.py:4341 app_Main.py:4587 app_Main.py:6878
msgid "Cancel"
msgstr ""

#: appDatabase.py:160 appDatabase.py:835
msgid "Tool Name"
msgstr ""

#: appDatabase.py:161 appDatabase.py:837 appEditors/AppExcEditor.py:3765
#: appGUI/ObjectUI.py:690 appGUI/ObjectUI.py:959 appGUI/ObjectUI.py:1525
#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:132 appTools/ToolCutOut.py:1819
#: appTools/ToolIsolation.py:3053 appTools/ToolNCC.py:3858 appTools/ToolNCC.py:3867
#: appTools/ToolPaint.py:2881
msgid "Tool Dia"
msgstr ""

#: appDatabase.py:162 appDatabase.py:839 appDatabase.py:1273 appGUI/ObjectUI.py:934
msgid "Tool Offset"
msgstr ""

#: appDatabase.py:163 appDatabase.py:841 appDatabase.py:1290
msgid "Custom Offset"
msgstr ""

#: appDatabase.py:164 appDatabase.py:843 appDatabase.py:1257
#: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:70
#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:53
#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:62
#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:72
msgid "Tool Type"
msgstr ""

#: appDatabase.py:165 appDatabase.py:845
msgid "Tool Shape"
msgstr ""

#: appDatabase.py:166 appDatabase.py:848 appDatabase.py:1309 appDatabase.py:1834
#: appEditors/appGCodeEditor.py:703 appGUI/ObjectUI.py:1088 appGUI/ObjectUI.py:1840
#: appGUI/preferences/geometry/GeometryOptPrefGroupUI.py:49
#: appGUI/preferences/tools/ToolsCalculatorsPrefGroupUI.py:78
#: appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:58
#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:57
#: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:115
#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:98
#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:105
#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:113 appTools/ToolCalculators.py:240
#: appTools/ToolCutOut.py:1862 appTools/ToolDrilling.py:2129 appTools/ToolMilling.py:1793
msgid "Cut Z"
msgstr ""

#: appDatabase.py:167 appDatabase.py:850 appDatabase.py:1323 appDatabase.py:1871
msgid "MultiDepth"
msgstr ""

#: appDatabase.py:168 appDatabase.py:852 appDatabase.py:1336 appDatabase.py:1887
msgid "DPP"
msgstr ""

#: appDatabase.py:169 appDatabase.py:854 appDatabase.py:1224
msgid "V-Dia"
msgstr ""

#: appDatabase.py:170 appDatabase.py:856 appDatabase.py:1238
msgid "V-Angle"
msgstr ""

#: appDatabase.py:171 appDatabase.py:858 appDatabase.py:1350 appDatabase.py:1903
#: appGUI/ObjectUI.py:1135 appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:184
#: appGUI/preferences/geometry/GeometryOptPrefGroupUI.py:102
#: appGUI/preferences/tools/Tools2CalPrefGroupUI.py:61
#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:98 appObjects/FlatCAMGeometry.py:1745
#: appTools/ToolCalibration.py:769 appTools/ToolDrilling.py:1280
#: appTools/ToolDrilling.py:2175 appTools/ToolMilling.py:1291 appTools/ToolMilling.py:1839
msgid "Travel Z"
msgstr ""

#: appDatabase.py:172 appDatabase.py:860
msgid "FR"
msgstr ""

#: appDatabase.py:173 appDatabase.py:862
msgid "FR Z"
msgstr ""

#: appDatabase.py:174 appDatabase.py:864 appDatabase.py:1431
msgid "FR Rapids"
msgstr ""

#: appDatabase.py:175 appDatabase.py:866 appDatabase.py:1452
#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:186
msgid "Spindle Speed"
msgstr ""

#: appDatabase.py:176 appDatabase.py:868 appDatabase.py:1467 appDatabase.py:1984
#: appGUI/ObjectUI.py:1242 appTools/ToolDrilling.py:2250 appTools/ToolMilling.py:1957
msgid "Dwell"
msgstr ""

#: appDatabase.py:177 appDatabase.py:870 appDatabase.py:1480 appDatabase.py:1997
msgid "Dwelltime"
msgstr ""

#: appDatabase.py:178 appDatabase.py:872 appGUI/ObjectUI.py:1401
#: appGUI/preferences/geometry/GeometryOptPrefGroupUI.py:255
#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:221
#: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:237 appTools/ToolDrilling.py:2484
#: appTools/ToolSolderPaste.py:1407
msgid "Preprocessor"
msgstr ""

#: appDatabase.py:179 appDatabase.py:874 appDatabase.py:1365
msgid "ExtraCut"
msgstr ""

#: appDatabase.py:180 appDatabase.py:876 appDatabase.py:1380
msgid "E-Cut Length"
msgstr ""

#: appDatabase.py:181 appDatabase.py:878
msgid "Toolchange"
msgstr ""

#: appDatabase.py:182 appDatabase.py:880
msgid "Toolchange XY"
msgstr ""

#: appDatabase.py:183 appDatabase.py:882
#: appGUI/preferences/geometry/GeometryOptPrefGroupUI.py:132
#: appGUI/preferences/tools/Tools2CalPrefGroupUI.py:98
#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:124 appTools/ToolCalibration.py:806
msgid "Toolchange Z"
msgstr ""

#: appDatabase.py:184 appDatabase.py:884
#: appGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:56
#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:306 appTools/ToolDrilling.py:2401
#: appTools/ToolMilling.py:2087
msgid "Start Z"
msgstr ""

#: appDatabase.py:185 appDatabase.py:887
msgid "End Z"
msgstr ""

#: appDatabase.py:189
msgid "Tool Index."
msgstr ""

#: appDatabase.py:191 appDatabase.py:1126
msgid ""
"Tool name.\n"
"This is not used in the app, it's function\n"
"is to serve as a note for the user."
msgstr ""

#: appDatabase.py:195 appDatabase.py:1139
msgid "Tool Diameter."
msgstr ""

#: appDatabase.py:197 appDatabase.py:1275
msgid ""
"Tool Offset.\n"
"Can be of a few types:\n"
"Path = zero offset\n"
"In = offset inside by half of tool diameter\n"
"Out = offset outside by half of tool diameter\n"
"Custom = custom offset using the Custom Offset value"
msgstr ""

#: appDatabase.py:204 appDatabase.py:1292
msgid ""
"Custom Offset.\n"
"A value to be used as offset from the current path."
msgstr ""

#: appDatabase.py:207 appDatabase.py:1259
msgid ""
"Tool Type.\n"
"Can be:\n"
"Iso = isolation cut\n"
"Rough = rough cut, low feedrate, multiple passes\n"
"Finish = finishing cut, high feedrate"
msgstr ""

#: appDatabase.py:213 appDatabase.py:1210
msgid ""
"Tool Shape. \n"
"Can be:\n"
"C1 ... C4 = circular tool with x flutes\n"
"B = ball tip milling tool\n"
"V = v-shape milling tool"
msgstr ""

#: appDatabase.py:219 appDatabase.py:1311
msgid ""
"Cutting Depth.\n"
"The depth at which to cut into material."
msgstr ""

#: appDatabase.py:222 appDatabase.py:1325
msgid ""
"Multi Depth.\n"
"Selecting this will allow cutting in multiple passes,\n"
"each pass adding a DPP parameter depth."
msgstr ""

#: appDatabase.py:226 appDatabase.py:1338 appDatabase.py:1889
msgid ""
"DPP. Depth per Pass.\n"
"The value used to cut into material on each pass."
msgstr ""

#: appDatabase.py:229 appDatabase.py:1226
msgid ""
"V-Dia.\n"
"Diameter of the tip for V-Shape Tools."
msgstr ""

#: appDatabase.py:232 appDatabase.py:1240
msgid ""
"V-Agle.\n"
"Angle at the tip for the V-Shape Tools."
msgstr ""

#: appDatabase.py:235 appDatabase.py:1352
msgid ""
"Clearance Height.\n"
"Height at which the milling bit will travel between cuts,\n"
"above the surface of the material, avoiding all fixtures."
msgstr ""

#: appDatabase.py:239
msgid ""
"FR. Feedrate\n"
"The speed on XY plane used while cutting into material."
msgstr ""

#: appDatabase.py:242
msgid ""
"FR Z. Feedrate Z\n"
"The speed on Z plane."
msgstr ""

#: appDatabase.py:245 appDatabase.py:1433
msgid ""
"FR Rapids. Feedrate Rapids\n"
"Speed used while moving as fast as possible.\n"
"This is used only by some devices that can't use\n"
"the G0 g-code command. Mostly 3D printers."
msgstr ""

#: appDatabase.py:250 appDatabase.py:1454
msgid ""
"Spindle Speed.\n"
"If it's left empty it will not be used.\n"
"The speed of the spindle in RPM."
msgstr ""

#: appDatabase.py:254 appDatabase.py:1469 appDatabase.py:1986
msgid ""
"Dwell.\n"
"Check this if a delay is needed to allow\n"
"the spindle motor to reach its set speed."
msgstr ""

#: appDatabase.py:258 appDatabase.py:1482 appDatabase.py:1999
msgid ""
"Dwell Time.\n"
"A delay used to allow the motor spindle reach its set speed."
msgstr ""

#: appDatabase.py:261
msgid ""
"Preprocessor.\n"
"A selection of files that will alter the generated G-code\n"
"to fit for a number of use cases."
msgstr ""

#: appDatabase.py:265 appDatabase.py:1367
msgid ""
"Extra Cut.\n"
"If checked, after a isolation is finished an extra cut\n"
"will be added where the start and end of isolation meet\n"
"such as that this point is covered by this extra cut to\n"
"ensure a complete isolation."
msgstr ""

#: appDatabase.py:271 appDatabase.py:1382
msgid ""
"Extra Cut length.\n"
"If checked, after a isolation is finished an extra cut\n"
"will be added where the start and end of isolation meet\n"
"such as that this point is covered by this extra cut to\n"
"ensure a complete isolation. This is the length of\n"
"the extra cut."
msgstr ""

#: appDatabase.py:278
msgid ""
"Toolchange.\n"
"It will create a toolchange event.\n"
"The kind of toolchange is determined by\n"
"the preprocessor file."
msgstr ""

#: appDatabase.py:283
msgid ""
"Toolchange XY.\n"
"A set of coordinates in the format (x, y).\n"
"Will determine the cartesian position of the point\n"
"where the tool change event take place."
msgstr ""

#: appDatabase.py:288
msgid ""
"Toolchange Z.\n"
"The position on Z plane where the tool change event take place."
msgstr ""

#: appDatabase.py:291
msgid ""
"Start Z.\n"
"If it's left empty it will not be used.\n"
"A position on Z plane to move immediately after job start."
msgstr ""

#: appDatabase.py:295
msgid ""
"End Z.\n"
"A position on Z plane to move immediately after job stop."
msgstr ""

#: appDatabase.py:307 appDatabase.py:684 appDatabase.py:718 appDatabase.py:2647
#: appDatabase.py:3017 appDatabase.py:3051 appTools/ToolCutOut.py:287
#: appTools/ToolDrilling.py:881 appTools/ToolIsolation.py:1032 appTools/ToolNCC.py:964
#: appTools/ToolPaint.py:703
msgid "Could not load Tools DB file."
msgstr ""

#: appDatabase.py:315 appDatabase.py:726 appDatabase.py:2655 appDatabase.py:3059
#: appTools/ToolCutOut.py:298 appTools/ToolDrilling.py:889 appTools/ToolIsolation.py:1043
#: appTools/ToolNCC.py:975 appTools/ToolPaint.py:714
msgid "Failed to parse Tools DB file."
msgstr ""

#: appDatabase.py:318 appDatabase.py:729 appDatabase.py:2658 appDatabase.py:3062
msgid "Loaded Tools DB from"
msgstr ""

#: appDatabase.py:324 appDatabase.py:2562
msgid "Add to DB"
msgstr ""

#: appDatabase.py:326 appDatabase.py:2565
msgid "Copy from DB"
msgstr ""

#: appDatabase.py:328 appDatabase.py:2568
msgid "Delete from DB"
msgstr ""

#: appDatabase.py:605 appDatabase.py:2917
msgid "Tool added to DB."
msgstr ""

#: appDatabase.py:626 appDatabase.py:2950
msgid "Tool copied from Tools DB."
msgstr ""

#: appDatabase.py:644 appDatabase.py:2977
msgid "Tool removed from Tools DB."
msgstr ""

#: appDatabase.py:655 appDatabase.py:2988
msgid "Export Tools Database"
msgstr ""

#: appDatabase.py:658 appDatabase.py:2991
msgid "Tools_Database"
msgstr ""

#: appDatabase.py:695 appDatabase.py:698 appDatabase.py:750 appDatabase.py:3028
#: appDatabase.py:3031 appDatabase.py:3126
msgid "Failed to write Tools DB to file."
msgstr ""

#: appDatabase.py:701 appDatabase.py:3034
msgid "Exported Tools DB to"
msgstr ""

#: appDatabase.py:708 appDatabase.py:3041
msgid "Import FlatCAM Tools DB"
msgstr ""

#: appDatabase.py:740 appDatabase.py:915 appDatabase.py:3073 appDatabase.py:3464
#: appObjects/FlatCAMGeometry.py:1027 appTools/ToolCutOut.py:476 appTools/ToolCutOut.py:517
#: appTools/ToolIsolation.py:2545 appTools/ToolIsolation.py:2629 appTools/ToolNCC.py:3607
#: appTools/ToolNCC.py:3687 appTools/ToolPaint.py:2625 appTools/ToolPaint.py:2714
#: app_Main.py:5676 app_Main.py:5718 app_Main.py:5749 app_Main.py:5769 app_Main.py:5779
msgid "Tools Database"
msgstr ""

#: appDatabase.py:754 appDatabase.py:3130
msgid "Saved Tools DB."
msgstr ""

#: appDatabase.py:901 appDatabase.py:3447
msgid "No Tool/row selected in the Tools Database table"
msgstr ""

#: appDatabase.py:919 appDatabase.py:3468
msgid "Cancelled adding tool from DB."
msgstr ""

#: appDatabase.py:995
msgid "Tool Description"
msgstr ""

#: appDatabase.py:1008
msgid "Milling Parameters"
msgstr ""

#: appDatabase.py:1021
msgid "NCC Parameters"
msgstr ""

#: appDatabase.py:1034
msgid "Paint Parameters"
msgstr ""

#: appDatabase.py:1047
msgid "Isolation Parameters"
msgstr ""

#: appDatabase.py:1060
msgid "Drilling Parameters"
msgstr ""

#: appDatabase.py:1073
msgid "Cutout Parameters"
msgstr ""

#: appDatabase.py:1124 appEditors/AppGeoEditor.py:3287 appGUI/ObjectUI.py:219
#: appGUI/ObjectUI.py:521 appGUI/ObjectUI.py:794 appGUI/ObjectUI.py:1738
#: appGUI/ObjectUI.py:2474 appGUI/ObjectUI.py:2541 appTools/ToolCalibration.py:929
#: appTools/ToolFiducials.py:681
msgid "Name"
msgstr ""

#: appDatabase.py:1137 appEditors/AppExcEditor.py:2567 appEditors/AppExcEditor.py:3732
#: appGUI/ObjectUI.py:571 appObjects/FlatCAMExcellon.py:876
#: appObjects/FlatCAMExcellon.py:976 appTools/ToolDrilling.py:1748
#: appTools/ToolDrilling.py:1813 appTools/ToolDrilling.py:2051
#: appTools/ToolIsolation.py:2984 appTools/ToolMilling.py:1071 appTools/ToolMilling.py:1175
#: appTools/ToolMilling.py:1360 appTools/ToolMilling.py:1670 appTools/ToolNCC.py:3777
#: appTools/ToolPaint.py:2812 appTools/ToolPcbWizard.py:404 appTools/ToolProperties.py:417
#: appTools/ToolProperties.py:480 appTools/ToolSolderPaste.py:1166
#: tclCommands/TclCommandDrillcncjob.py:195
msgid "Diameter"
msgstr ""

#: appDatabase.py:1150
msgid "Diameter Tolerance"
msgstr ""

#: appDatabase.py:1152
msgid ""
"Tool tolerance. If there is a tool in the targeted tools table with\n"
"the value within the limits then this tool from DB will be used."
msgstr ""

#: appDatabase.py:1158
msgid "Min"
msgstr ""

#: appDatabase.py:1160
msgid "Set the tool tolerance minimum."
msgstr ""

#: appDatabase.py:1172
msgid "Max"
msgstr ""

#: appDatabase.py:1174
msgid "Set the tool tolerance maximum."
msgstr ""

#: appDatabase.py:1186 appDatabase.py:1504
#: appGUI/preferences/excellon/ExcellonOptPrefGroupUI.py:46 appTools/ToolMilling.py:1738
#: appTools/ToolNCC.py:3936
msgid "Operation"
msgstr ""

#: appDatabase.py:1188
msgid "The kind of Application Tool where this tool is to be used."
msgstr ""

#: appDatabase.py:1192 appDatabase.py:2695 appDatabase.py:2731 appDatabase.py:2794
#: appDatabase.py:3079 appGUI/MainGUI.py:1299
msgid "General"
msgstr ""

#: appDatabase.py:1192 appDatabase.py:2753 appDatabase.py:3082
#: appGUI/preferences/excellon/ExcellonOptPrefGroupUI.py:55 appTools/ToolMilling.py:1747
msgid "Milling"
msgstr ""

#: appDatabase.py:1192 appDatabase.py:2757 appDatabase.py:3087
#: appGUI/preferences/excellon/ExcellonOptPrefGroupUI.py:54 appTools/ToolMilling.py:1746
msgid "Drilling"
msgstr ""

#: appDatabase.py:1192 appDatabase.py:1514 appDatabase.py:2761 appDatabase.py:3095
#: appTools/ToolIsolation.py:1066 appTools/ToolIsolation.py:2538 appTools/ToolNCC.py:3946
msgid "Isolation"
msgstr ""

#: appDatabase.py:1192 appDatabase.py:2767 appDatabase.py:3103
#: appEditors/AppGeoEditor.py:528 appGUI/MainGUI.py:1506 appTools/ToolPaint.py:737
#: appTools/ToolPaint.py:2618
msgid "Paint"
msgstr ""

#: appDatabase.py:1192 appDatabase.py:2773 appDatabase.py:3111 appTools/ToolNCC.py:999
#: appTools/ToolNCC.py:3600
msgid "NCC"
msgstr ""

#: appDatabase.py:1192 appDatabase.py:2779 appTools/ToolCutOut.py:321
#: appTools/ToolCutOut.py:457
msgid "Cutout"
msgstr ""

#: appDatabase.py:1208 appGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:220
#: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:293
#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:322
#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:286 appTools/ToolIsolation.py:3370
#: appTools/ToolNCC.py:4229 appTools/ToolPaint.py:3161
msgid "Shape"
msgstr ""

#: appDatabase.py:1403 appGUI/ObjectUI.py:1154
#: appGUI/preferences/geometry/GeometryOptPrefGroupUI.py:186
#: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:148 appTools/ToolMilling.py:1860
#: appTools/ToolSolderPaste.py:1325
msgid "Feedrate X-Y"
msgstr ""

#: appDatabase.py:1405
msgid ""
"Feedrate X-Y. Feedrate\n"
"The speed on XY plane used while cutting into material."
msgstr ""

#: appDatabase.py:1417 appDatabase.py:1929 appGUI/ObjectUI.py:1168
#: appGUI/preferences/geometry/GeometryOptPrefGroupUI.py:201
#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:171
#: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:161 appTools/ToolDrilling.py:2196
#: appTools/ToolMilling.py:1875 appTools/ToolSolderPaste.py:1337
msgid "Feedrate Z"
msgstr ""

#: appDatabase.py:1419
msgid ""
"Feedrate Z\n"
"The speed on Z plane."
msgstr ""

#: appDatabase.py:1506 appTools/ToolNCC.py:3938
msgid ""
"The 'Operation' can be:\n"
"- Isolation -> will ensure that the non-copper clearing is always complete.\n"
"If it's not successful then the non-copper clearing will fail, too.\n"
"- Clear -> the regular non-copper clearing."
msgstr ""

#: appDatabase.py:1513 appEditors/AppGerberEditor.py:2749 appGUI/GUIElements.py:3011
#: appTools/ToolNCC.py:3945
msgid "Clear"
msgstr ""

#: appDatabase.py:1522 appDatabase.py:1768
#: appGUI/preferences/excellon/ExcellonOptPrefGroupUI.py:62
#: appGUI/preferences/geometry/GeometryEditorPrefGroupUI.py:56
#: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:182
#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:137 appTools/ToolIsolation.py:3159
#: appTools/ToolMilling.py:1760 appTools/ToolNCC.py:3954
msgid "Milling Type"
msgstr ""

#: appDatabase.py:1524 appDatabase.py:1532 appDatabase.py:1770 appDatabase.py:1778
#: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:184
#: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:192
#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:139
#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:147 appTools/ToolIsolation.py:3161
#: appTools/ToolIsolation.py:3169 appTools/ToolNCC.py:3956 appTools/ToolNCC.py:3964
msgid ""
"Milling type when the selected tool is of type: 'iso_op':\n"
"- climb / best for precision milling and to reduce tool usage\n"
"- conventional / useful when there is no backlash compensation"
msgstr ""

#: appDatabase.py:1529 appDatabase.py:1775
#: appGUI/preferences/geometry/GeometryEditorPrefGroupUI.py:62
#: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:189
#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:144 appTools/ToolIsolation.py:3166
#: appTools/ToolNCC.py:3961
msgid "Climb"
msgstr ""

#: appDatabase.py:1530 appDatabase.py:1776
#: appGUI/preferences/geometry/GeometryEditorPrefGroupUI.py:63
#: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:190
#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:145 appTools/ToolIsolation.py:3167
#: appTools/ToolNCC.py:3962
msgid "Conventional"
msgstr ""

#: appDatabase.py:1542 appDatabase.py:1651 appDatabase.py:1753 appDatabase.py:2027
#: appEditors/AppGeoEditor.py:450 appGUI/ObjectUI.py:1552
#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:250
#: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:167
#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:182
#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:163 appTools/ToolDrilling.py:2298
#: appTools/ToolIsolation.py:3144 appTools/ToolNCC.py:3977 appTools/ToolPaint.py:2953
msgid "Overlap"
msgstr ""

#: appDatabase.py:1544 appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:184
#: appTools/ToolNCC.py:3979
msgid ""
"How much (percentage) of the tool width to overlap each tool pass.\n"
"Adjust the value starting with lower values\n"
"and increasing it if areas that should be cleared are still \n"
"not cleared.\n"
"Lower values = faster processing, faster execution on CNC.\n"
"Higher values = slow processing and slow execution on CNC\n"
"due of too many paths."
msgstr ""

#: appDatabase.py:1563 appDatabase.py:2071 appEditors/AppGeoEditor.py:470
#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:72
#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:229
#: appGUI/preferences/tools/Tools2FiducialsPrefGroupUI.py:59
#: appGUI/preferences/tools/Tools2InvertPrefGroupUI.py:45
#: appGUI/preferences/tools/Tools2InvertPrefGroupUI.py:53
#: appGUI/preferences/tools/ToolsCornersPrefGroupUI.py:66
#: appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:115
#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:202
#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:183 appTools/ToolCopperThieving.py:1204
#: appTools/ToolCopperThieving.py:1455 appTools/ToolCorners.py:411
#: appTools/ToolCutOut.py:1915 appTools/ToolFiducials.py:786
#: appTools/ToolInvertGerber.py:234 appTools/ToolInvertGerber.py:242
#: appTools/ToolNCC.py:4021 appTools/ToolNCC.py:4124
msgid "Margin"
msgstr ""

#: appDatabase.py:1565 appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:74
#: appGUI/preferences/tools/Tools2FiducialsPrefGroupUI.py:61
#: appGUI/preferences/tools/Tools2FiducialsPrefGroupUI.py:125
#: appGUI/preferences/tools/ToolsCornersPrefGroupUI.py:68
#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:204 appTools/ToolCopperThieving.py:1206
#: appTools/ToolCorners.py:413 appTools/ToolFiducials.py:788 appTools/ToolNCC.py:4023
#: appTools/ToolNCC.py:4126
msgid "Bounding box margin."
msgstr ""

#: appDatabase.py:1576 appDatabase.py:1687 appEditors/AppGeoEditor.py:484
#: appGUI/ObjectUI.py:1567 appGUI/preferences/tools/Tools2EDrillsPrefGroupUI.py:105
#: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:106
#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:215
#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:198 appTools/ToolExtractDrills.py:520
#: appTools/ToolNCC.py:3998 appTools/ToolPaint.py:2989 appTools/ToolPunchGerber.py:793
msgid "Method"
msgstr ""

#: appDatabase.py:1578 appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:217
#: appTools/ToolNCC.py:4000
msgid ""
"Algorithm for copper clearing:\n"
"- Standard: Fixed step inwards.\n"
"- Seed-based: Outwards from seed.\n"
"- Line-based: Parallel lines."
msgstr ""

#: appDatabase.py:1586 appDatabase.py:1701 appEditors/AppGeoEditor.py:498
#: appGUI/ObjectUI.py:1577 appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:230
#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:217 appTools/ToolNCC.py:1915
#: appTools/ToolNCC.py:4013 appTools/ToolPaint.py:1455 appTools/ToolPaint.py:3014
#: tclCommands/TclCommandCopperClear.py:126 tclCommands/TclCommandCopperClear.py:134
#: tclCommands/TclCommandPaint.py:125
msgid "Standard"
msgstr ""

#: appDatabase.py:1586 appDatabase.py:1701 appEditors/AppGeoEditor.py:498
#: appEditors/AppGeoEditor.py:568 appEditors/AppGeoEditor.py:5109 appGUI/ObjectUI.py:1577
#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:230
#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:217 appTools/ToolNCC.py:1926
#: appTools/ToolNCC.py:4013 appTools/ToolPaint.py:1469 appTools/ToolPaint.py:3014
#: defaults.py:462 defaults.py:499 tclCommands/TclCommandCopperClear.py:128
#: tclCommands/TclCommandCopperClear.py:136 tclCommands/TclCommandPaint.py:127
msgid "Seed"
msgstr ""

#: appDatabase.py:1586 appDatabase.py:1701 appEditors/AppGeoEditor.py:498
#: appEditors/AppGeoEditor.py:5113 appGUI/ObjectUI.py:1577
#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:230
#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:217 appTools/ToolNCC.py:1937
#: appTools/ToolNCC.py:4013 appTools/ToolPaint.py:160 appTools/ToolPaint.py:1483
#: appTools/ToolPaint.py:3014 tclCommands/TclCommandCopperClear.py:130
#: tclCommands/TclCommandPaint.py:129
msgid "Lines"
msgstr ""

#: appDatabase.py:1586 appDatabase.py:1701
#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:230
#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:217 appTools/ToolNCC.py:1948
#: appTools/ToolNCC.py:4013 appTools/ToolPaint.py:1648 appTools/ToolPaint.py:3014
#: tclCommands/TclCommandPaint.py:133
msgid "Combo"
msgstr ""

#: appDatabase.py:1594 appDatabase.py:1712 appGUI/ObjectUI.py:2070 appGUI/ObjectUI.py:2093
#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:237
#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:224 appObjects/FlatCAMCNCJob.py:1157
#: appObjects/FlatCAMCNCJob.py:1179 appTools/ToolNCC.py:4034 appTools/ToolNCC.py:4137
#: appTools/ToolPaint.py:3025
msgid "Connect"
msgstr ""

#: appDatabase.py:1598 appDatabase.py:1715 appEditors/AppGeoEditor.py:507
#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:239
#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:226 appTools/ToolNCC.py:4038
#: appTools/ToolNCC.py:4139 appTools/ToolPaint.py:3028
msgid ""
"Draw lines between resulting\n"
"segments to minimize tool lifts."
msgstr ""

#: appDatabase.py:1604 appDatabase.py:1719
#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:246
#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:232 appTools/ToolNCC.py:4044
#: appTools/ToolNCC.py:4145 appTools/ToolPaint.py:3032
msgid "Contour"
msgstr ""

#: appDatabase.py:1608 appDatabase.py:1722 appEditors/AppGeoEditor.py:517
#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:248
#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:234 appTools/ToolNCC.py:4048
#: appTools/ToolNCC.py:4147 appTools/ToolPaint.py:3035
msgid ""
"Cut around the perimeter of the polygon\n"
"to trim rough edges."
msgstr ""

#: appDatabase.py:1614 appDatabase.py:1672 appEditors/AppGeoEditor.py:611
#: appEditors/AppGerberEditor.py:5321 appEditors/appGCodeEditor.py:692
#: appGUI/ObjectUI.py:143 appGUI/ObjectUI.py:858 appGUI/ObjectUI.py:1830
#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:255
#: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:183
#: appTools/ToolEtchCompensation.py:417 appTools/ToolEtchCompensation.py:425
#: appTools/ToolNCC.py:4054 appTools/ToolNCC.py:4153 appTools/ToolPaint.py:2974
#: appTools/ToolPaint.py:3081 appTools/ToolTransform.py:517
msgid "Offset"
msgstr ""

#: appDatabase.py:1618 appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:257
#: appTools/ToolNCC.py:4058 appTools/ToolNCC.py:4155
msgid ""
"If used, it will add an offset to the copper features.\n"
"The copper clearing will finish to a distance\n"
"from the copper features.\n"
"The value can be between 0 and 10 FlatCAM units."
msgstr ""

#: appDatabase.py:1653 appEditors/AppGeoEditor.py:452
#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:165 appTools/ToolPaint.py:2955
msgid ""
"How much (percentage) of the tool width to overlap each tool pass.\n"
"Adjust the value starting with lower values\n"
"and increasing it if areas that should be painted are still \n"
"not painted.\n"
"Lower values = faster processing, faster execution on CNC.\n"
"Higher values = slow processing and slow execution on CNC\n"
"due of too many paths."
msgstr ""

#: appDatabase.py:1674 appEditors/AppGeoEditor.py:472
#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:185 appTools/ToolPaint.py:2976
#: appTools/ToolPaint.py:3083
msgid ""
"Distance by which to avoid\n"
"the edges of the polygon to\n"
"be painted."
msgstr ""

#: appDatabase.py:1689 appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:200
#: appTools/ToolPaint.py:2991
msgid ""
"Algorithm for painting:\n"
"- Standard: Fixed step inwards.\n"
"- Seed-based: Outwards from seed.\n"
"- Line-based: Parallel lines.\n"
"- Laser-lines: Active only for Gerber objects.\n"
"Will create lines that follow the traces.\n"
"- Combo: In case of failure a new method will be picked from the above\n"
"in the order specified."
msgstr ""

#: appDatabase.py:1701 appDatabase.py:1703
#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:217 appTools/ToolPaint.py:154
#: appTools/ToolPaint.py:159 appTools/ToolPaint.py:1497 appTools/ToolPaint.py:3014
#: appTools/ToolPaint.py:3016 tclCommands/TclCommandPaint.py:131
msgid "Laser_lines"
msgstr ""

#: appDatabase.py:1740 appGUI/preferences/tools/ToolsISOPrefGroupUI.py:154
#: appTools/ToolIsolation.py:3131
msgid "Passes"
msgstr ""

#: appDatabase.py:1742 appGUI/preferences/tools/ToolsISOPrefGroupUI.py:156
#: appTools/ToolIsolation.py:3133
msgid ""
"Width of the isolation gap in\n"
"number (integer) of tool widths."
msgstr ""

#: appDatabase.py:1755 appGUI/ObjectUI.py:1554
#: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:169 appTools/ToolIsolation.py:3146
msgid "How much (percentage) of the tool width to overlap each tool pass."
msgstr ""

#: appDatabase.py:1788 appGUI/ObjectUI.py:234
#: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:201 appTools/ToolIsolation.py:3179
msgid "Follow"
msgstr ""

#: appDatabase.py:1790 appDatabase.py:1796 appGUI/ObjectUI.py:235
#: appGUI/preferences/gerber/GerberAdvOptPrefGroupUI.py:45
#: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:203
#: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:209 appTools/ToolIsolation.py:3181
#: appTools/ToolIsolation.py:3187
msgid ""
"Generate a 'Follow' geometry.\n"
"This means that it will cut through\n"
"the middle of the trace."
msgstr ""

#: appDatabase.py:1805 appGUI/preferences/tools/ToolsISOPrefGroupUI.py:218
#: appTools/ToolIsolation.py:3196
msgid "Isolation Type"
msgstr ""

#: appDatabase.py:1807 appGUI/preferences/tools/ToolsISOPrefGroupUI.py:220
#: appTools/ToolIsolation.py:3198
msgid ""
"Choose how the isolation will be executed:\n"
"- 'Full' -> complete isolation of polygons\n"
"- 'Ext' -> will isolate only on the outside\n"
"- 'Int' -> will isolate only on the inside\n"
"'Exterior' isolation is almost always possible\n"
"(with the right tool) but 'Interior'\n"
"isolation can be done only when there is an opening\n"
"inside of the polygon (e.g polygon is a 'doughnut' shape)."
msgstr ""

#: appDatabase.py:1816 appGUI/preferences/gerber/GerberAdvOptPrefGroupUI.py:72
#: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:229 appTools/ToolIsolation.py:3207
msgid "Full"
msgstr ""

#: appDatabase.py:1817 appGUI/preferences/tools/ToolsISOPrefGroupUI.py:230
#: appTools/ToolIsolation.py:3208
msgid "Ext"
msgstr ""

#: appDatabase.py:1818 appGUI/preferences/tools/ToolsISOPrefGroupUI.py:231
#: appTools/ToolIsolation.py:3209
msgid "Int"
msgstr ""

#: appDatabase.py:1836 appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:59
#: appTools/ToolDrilling.py:2131 appTools/ToolMilling.py:1795
msgid ""
"Drill depth (negative)\n"
"below the copper surface."
msgstr ""

#: appDatabase.py:1855 appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:283
#: appTools/ToolDrilling.py:2274 appTools/ToolMilling.py:1980
msgid "Offset Z"
msgstr ""

#: appDatabase.py:1857 appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:285
#: appTools/ToolDrilling.py:2276 appTools/ToolMilling.py:1982
msgid ""
"Some drill bits (the larger ones) need to drill deeper\n"
"to create the desired exit hole diameter due of the tip shape.\n"
"The value here can compensate the Cut Z parameter."
msgstr ""

#: appDatabase.py:1874 appGUI/ObjectUI.py:1112
#: appGUI/preferences/geometry/GeometryOptPrefGroupUI.py:72
#: appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:82
#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:80 appTools/ToolCutOut.py:1886
#: appTools/ToolDrilling.py:2153 appTools/ToolMilling.py:1817
msgid ""
"Use multiple passes to limit\n"
"the cut depth in each pass. Will\n"
"cut multiple times until Cut Z is\n"
"reached."
msgstr ""

#: appDatabase.py:1896 appGUI/ObjectUI.py:1126
#: appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:94
#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:92 appTools/ToolCutOut.py:1900
#: appTools/ToolDrilling.py:2166 appTools/ToolMilling.py:1830
msgid "Depth of each pass (positive)."
msgstr ""

#: appDatabase.py:1905 appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:100
#: appTools/ToolDrilling.py:2177 appTools/ToolMilling.py:1841
msgid ""
"Tool height when travelling\n"
"across the XY plane."
msgstr ""

#: appDatabase.py:1931 appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:173
#: appTools/ToolDrilling.py:2198 appTools/ToolMilling.py:1877
msgid ""
"Tool speed while drilling\n"
"(in units per minute).\n"
"So called 'Plunge' feedrate.\n"
"This is for linear move G01."
msgstr ""

#: appDatabase.py:1946 appGUI/ObjectUI.py:1183
#: appGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:67
#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:317 appTools/ToolDrilling.py:2213
#: appTools/ToolMilling.py:1892
msgid "Feedrate Rapids"
msgstr ""

#: appDatabase.py:1948 appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:319
#: appTools/ToolDrilling.py:2215 appTools/ToolMilling.py:1894
msgid ""
"Tool speed while drilling\n"
"(in units per minute).\n"
"This is for the rapid move G00.\n"
"It is useful only for Marlin,\n"
"ignore for any other cases."
msgstr ""

#: appDatabase.py:1969 appGUI/ObjectUI.py:1226
#: appGUI/preferences/geometry/GeometryOptPrefGroupUI.py:217
#: appObjects/FlatCAMGeometry.py:1761 appTools/ToolDrilling.py:1296
#: appTools/ToolDrilling.py:2235 appTools/ToolMilling.py:1307 appTools/ToolMilling.py:1942
msgid "Spindle speed"
msgstr ""

#: appDatabase.py:1971 appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:188
#: appTools/ToolDrilling.py:2237 appTools/ToolMilling.py:1944
msgid ""
"Speed of the spindle\n"
"in RPM (optional)"
msgstr ""

#: appDatabase.py:2016 appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:243
#: appTools/ToolDrilling.py:2290
msgid "Drill slots"
msgstr ""

#: appDatabase.py:2018 appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:245
#: appTools/ToolDrilling.py:2292
msgid "If the selected tool has slots then they will be drilled."
msgstr ""

#: appDatabase.py:2029 appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:252
#: appTools/ToolDrilling.py:2300
msgid "How much (percentage) of the tool diameter to overlap previous drill hole."
msgstr ""

#: appDatabase.py:2043 appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:264
#: appTools/ToolDrilling.py:2314
msgid "Last drill"
msgstr ""

#: appDatabase.py:2045 appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:266
#: appTools/ToolDrilling.py:2316
msgid ""
"If the slot length is not completely covered by drill holes,\n"
"add a drill hole on the slot end point."
msgstr ""

#: appDatabase.py:2073 appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:117
#: appTools/ToolCutOut.py:1917
msgid ""
"Margin over bounds. A positive value here\n"
"will make the cutout of the PCB further from\n"
"the actual PCB border"
msgstr ""

#: appDatabase.py:2085 appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:131
#: appTools/ToolCutOut.py:1925
msgid "Gap size"
msgstr ""

#: appDatabase.py:2087 appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:133
#: appTools/ToolCutOut.py:1927
msgid ""
"The size of the bridge gaps in the cutout\n"
"used to keep the board connected to\n"
"the surrounding material (the one \n"
"from which the PCB is cutout)."
msgstr ""

#: appDatabase.py:2096 appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:148
#: appTools/ToolCutOut.py:1940
msgid "Gap type"
msgstr ""

#: appDatabase.py:2098 appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:150
#: appTools/ToolCutOut.py:1942
msgid ""
"The type of gap:\n"
"- Bridge -> the cutout will be interrupted by bridges\n"
"- Thin -> same as 'bridge' but it will be thinner by partially milling the gap\n"
"- M-Bites -> 'Mouse Bites' - same as 'bridge' but covered with drill holes"
msgstr ""

#: appDatabase.py:2106 appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:158
#: appTools/ToolCutOut.py:1950
msgid "Bridge"
msgstr ""

#: appDatabase.py:2107 appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:159
#: appTools/ToolCutOut.py:1951
msgid "Thin"
msgstr ""

#: appDatabase.py:2118 appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:169
#: appTools/ToolCutOut.py:1961
msgid "Depth"
msgstr ""

#: appDatabase.py:2120 appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:171
#: appTools/ToolCutOut.py:1963
msgid ""
"The depth until the milling is done\n"
"in order to thin the gaps."
msgstr ""

#: appDatabase.py:2137 appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:43
#: appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:186 appTools/ToolCalculators.py:249
#: appTools/ToolCutOut.py:1978
msgid "Tool Diameter"
msgstr ""

#: appDatabase.py:2139 appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:188
#: appTools/ToolCutOut.py:1980
msgid "The drill hole diameter when doing mpuse bites."
msgstr ""

#: appDatabase.py:2150 appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:151
#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:180
#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:209
#: appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:198
#: appTools/ToolCopperThieving.py:1327 appTools/ToolCopperThieving.py:1367
#: appTools/ToolCopperThieving.py:1407 appTools/ToolCutOut.py:1990
msgid "Spacing"
msgstr ""

#: appDatabase.py:2152 appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:200
#: appTools/ToolCutOut.py:1992
msgid "The spacing between drill holes when doing mouse bites."
msgstr ""

#: appDatabase.py:2171 appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:233
#: appTools/ToolCutOut.py:1793
msgid "Convex Shape"
msgstr ""

#: appDatabase.py:2174 appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:235
#: appTools/ToolCutOut.py:1795 appTools/ToolCutOut.py:1800
msgid ""
"Create a convex shape surrounding the entire PCB.\n"
"Used only if the source object type is Gerber."
msgstr ""

#: appDatabase.py:2182 appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:209
#: appTools/ToolCutOut.py:2021
msgid "Gaps"
msgstr ""

#: appDatabase.py:2184 appTools/ToolCutOut.py:2023
msgid ""
"Number of gaps used for the Automatic cutout.\n"
"There can be maximum 8 bridges/gaps.\n"
"The choices are:\n"
"- None  - no gaps\n"
"- lr    - left + right\n"
"- tb    - top + bottom\n"
"- 4     - left + right +top + bottom\n"
"- 2lr   - 2*left + 2*right\n"
"- 2tb  - 2*top + 2*bottom\n"
"- 8     - 2*left + 2*right +2*top + 2*bottom"
msgstr ""

#: appDatabase.py:2221
msgid "Add Tool in DB"
msgstr ""

#: appDatabase.py:2259
msgid "Save DB"
msgstr ""

#: appDatabase.py:2262
msgid "Save the Tools Database information's."
msgstr ""

#: appDatabase.py:2268
msgid ""
"Insert a new tool in the Tools Table of the\n"
"object/application tool after selecting a tool\n"
"in the Tools Database."
msgstr ""

#: appDatabase.py:2294 appDatabase.py:2305 appEditors/AppExcEditor.py:4215
#: appEditors/AppExcEditor.py:4226 appEditors/appGCodeEditor.py:775
#: appEditors/appGCodeEditor.py:786 appGUI/ObjectUI.py:163 appGUI/ObjectUI.py:174
#: appTool.py:280 appTool.py:291 appTools/ToolAlignObjects.py:516
#: appTools/ToolAlignObjects.py:527 appTools/ToolCalculators.py:390
#: appTools/ToolCalculators.py:401 appTools/ToolCalibration.py:1395
#: appTools/ToolCalibration.py:1406 appTools/ToolCopperThieving.py:1595
#: appTools/ToolCopperThieving.py:1606 appTools/ToolCorners.py:462
#: appTools/ToolCorners.py:473 appTools/ToolCutOut.py:2195 appTools/ToolCutOut.py:2206
#: appTools/ToolDblSided.py:965 appTools/ToolDblSided.py:976 appTools/ToolDistance.py:659
#: appTools/ToolDistance.py:670 appTools/ToolDistanceMin.py:324
#: appTools/ToolDistanceMin.py:335 appTools/ToolDrilling.py:2652
#: appTools/ToolDrilling.py:2663 appTools/ToolEtchCompensation.py:476
#: appTools/ToolEtchCompensation.py:487 appTools/ToolExtractDrills.py:732
#: appTools/ToolExtractDrills.py:743 appTools/ToolFiducials.py:950
#: appTools/ToolFiducials.py:961 appTools/ToolFilm.py:1282 appTools/ToolFilm.py:1293
#: appTools/ToolImage.py:322 appTools/ToolImage.py:333 appTools/ToolInvertGerber.py:304
#: appTools/ToolInvertGerber.py:315 appTools/ToolIsolation.py:3439
#: appTools/ToolIsolation.py:3450 appTools/ToolMilling.py:2341 appTools/ToolMilling.py:2352
#: appTools/ToolNCC.py:4384 appTools/ToolNCC.py:4395 appTools/ToolOptimal.py:614
#: appTools/ToolOptimal.py:625 appTools/ToolPaint.py:3265 appTools/ToolPaint.py:3276
#: appTools/ToolPanelize.py:914 appTools/ToolPanelize.py:925 appTools/ToolPcbWizard.py:488
#: appTools/ToolPcbWizard.py:499 appTools/ToolPunchGerber.py:1022
#: appTools/ToolPunchGerber.py:1033 appTools/ToolQRCode.py:919 appTools/ToolQRCode.py:930
#: appTools/ToolRulesCheck.py:1655 appTools/ToolRulesCheck.py:1666
#: appTools/ToolSolderPaste.py:1575 appTools/ToolSolderPaste.py:1586 appTools/ToolSub.py:770
#: appTools/ToolSub.py:781 appTools/ToolTransform.py:964 appTools/ToolTransform.py:975
msgid "Edited value is out of range"
msgstr ""

#: appDatabase.py:2300 appDatabase.py:2307 appEditors/AppExcEditor.py:4221
#: appEditors/AppExcEditor.py:4228 appEditors/appGCodeEditor.py:781
#: appEditors/appGCodeEditor.py:788 appGUI/ObjectUI.py:169 appGUI/ObjectUI.py:176
#: appTool.py:286 appTool.py:293 appTools/ToolAlignObjects.py:522
#: appTools/ToolAlignObjects.py:529 appTools/ToolCalculators.py:396
#: appTools/ToolCalculators.py:403 appTools/ToolCalibration.py:1401
#: appTools/ToolCalibration.py:1408 appTools/ToolCopperThieving.py:1601
#: appTools/ToolCopperThieving.py:1608 appTools/ToolCorners.py:468
#: appTools/ToolCorners.py:475 appTools/ToolCutOut.py:2201 appTools/ToolCutOut.py:2208
#: appTools/ToolDblSided.py:971 appTools/ToolDblSided.py:978 appTools/ToolDistance.py:665
#: appTools/ToolDistance.py:672 appTools/ToolDistanceMin.py:330
#: appTools/ToolDistanceMin.py:337 appTools/ToolDrilling.py:2658
#: appTools/ToolDrilling.py:2665 appTools/ToolEtchCompensation.py:482
#: appTools/ToolEtchCompensation.py:489 appTools/ToolExtractDrills.py:738
#: appTools/ToolExtractDrills.py:745 appTools/ToolFiducials.py:956
#: appTools/ToolFiducials.py:963 appTools/ToolFilm.py:1288 appTools/ToolFilm.py:1295
#: appTools/ToolImage.py:328 appTools/ToolImage.py:335 appTools/ToolInvertGerber.py:310
#: appTools/ToolInvertGerber.py:317 appTools/ToolIsolation.py:3445
#: appTools/ToolIsolation.py:3452 appTools/ToolMilling.py:2347 appTools/ToolMilling.py:2354
#: appTools/ToolNCC.py:4390 appTools/ToolNCC.py:4397 appTools/ToolOptimal.py:620
#: appTools/ToolOptimal.py:627 appTools/ToolPaint.py:3271 appTools/ToolPaint.py:3278
#: appTools/ToolPanelize.py:920 appTools/ToolPanelize.py:927 appTools/ToolPcbWizard.py:494
#: appTools/ToolPcbWizard.py:501 appTools/ToolPunchGerber.py:1028
#: appTools/ToolPunchGerber.py:1035 appTools/ToolQRCode.py:925 appTools/ToolQRCode.py:932
#: appTools/ToolRulesCheck.py:1661 appTools/ToolRulesCheck.py:1668
#: appTools/ToolSolderPaste.py:1581 appTools/ToolSolderPaste.py:1588 appTools/ToolSub.py:776
#: appTools/ToolSub.py:783 appTools/ToolTransform.py:970 appTools/ToolTransform.py:977
msgid "Edited value is within limits."
msgstr ""

#: appDatabase.py:2573 appTranslation.py:210 app_Main.py:3380 app_Main.py:6872
msgid "Save changes"
msgstr ""

#: appDatabase.py:3290
msgid "To change tool properties select only one tool. Tools currently selected"
msgstr ""

#: appDatabase.py:3451 appTools/ToolDrilling.py:893
msgid "Tools DB empty."
msgstr ""

#: appEditors/AppExcEditor.py:51 appEditors/AppExcEditor.py:75
#: appEditors/AppExcEditor.py:169 appEditors/AppExcEditor.py:386
#: appEditors/AppExcEditor.py:589 appEditors/AppGerberEditor.py:241
#: appEditors/AppGerberEditor.py:248
msgid "Click to place ..."
msgstr ""

#: appEditors/AppExcEditor.py:59
msgid "To add a drill first select a tool"
msgstr ""

#: appEditors/AppExcEditor.py:123
msgid "Done. Drill added."
msgstr ""

#: appEditors/AppExcEditor.py:177
msgid "To add an Drill Array first select a tool in Tool Table"
msgstr ""

#: appEditors/AppExcEditor.py:193 appEditors/AppExcEditor.py:415
#: appEditors/AppExcEditor.py:636 appEditors/AppExcEditor.py:1151
#: appEditors/AppExcEditor.py:1178 appEditors/AppGerberEditor.py:471
#: appEditors/AppGerberEditor.py:1944 appEditors/AppGerberEditor.py:1974
msgid "Click on target location ..."
msgstr ""

#: appEditors/AppExcEditor.py:212
msgid "Click on the Drill Circular Array Start position"
msgstr ""

#: appEditors/AppExcEditor.py:234 appEditors/AppExcEditor.py:677
#: appEditors/AppGerberEditor.py:516
msgid "The value is not Float. Check for comma instead of dot separator."
msgstr ""

#: appEditors/AppExcEditor.py:238
msgid "The value is mistyped. Check the value"
msgstr ""

#: appEditors/AppExcEditor.py:337
msgid "Too many drills for the selected spacing angle."
msgstr ""

#: appEditors/AppExcEditor.py:355
msgid "Done. Drill Array added."
msgstr ""

#: appEditors/AppExcEditor.py:394
msgid "To add a slot first select a tool"
msgstr ""

#: appEditors/AppExcEditor.py:454 appEditors/AppExcEditor.py:461
#: appEditors/AppExcEditor.py:742 appEditors/AppExcEditor.py:749
msgid "Value is missing or wrong format. Add it and retry."
msgstr ""

#: appEditors/AppExcEditor.py:559
msgid "Done. Adding Slot completed."
msgstr ""

#: appEditors/AppExcEditor.py:597
msgid "To add an Slot Array first select a tool in Tool Table"
msgstr ""

#: appEditors/AppExcEditor.py:655
msgid "Click on the Slot Circular Array Start position"
msgstr ""

#: appEditors/AppExcEditor.py:680 appEditors/AppGerberEditor.py:519
msgid "The value is mistyped. Check the value."
msgstr ""

#: appEditors/AppExcEditor.py:859
msgid "Too many Slots for the selected spacing angle."
msgstr ""

#: appEditors/AppExcEditor.py:882
msgid "Done. Slot Array added."
msgstr ""

#: appEditors/AppExcEditor.py:904
msgid "Click on the Drill(s) to resize ..."
msgstr ""

#: appEditors/AppExcEditor.py:934
msgid "Resize drill(s) failed. Please enter a diameter for resize."
msgstr ""

#: appEditors/AppExcEditor.py:1112
msgid "Done. Drill/Slot Resize completed."
msgstr ""

#: appEditors/AppExcEditor.py:1115
msgid "Cancelled. No drills/slots selected for resize ..."
msgstr ""

#: appEditors/AppExcEditor.py:1153 appEditors/AppGerberEditor.py:1946
msgid "Click on reference location ..."
msgstr ""

#: appEditors/AppExcEditor.py:1210
msgid "Done. Drill(s) Move completed."
msgstr ""

#: appEditors/AppExcEditor.py:1318
msgid "Done. Drill(s) copied."
msgstr ""

#: appEditors/AppExcEditor.py:1897 appObjects/FlatCAMExcellon.py:324
#: appTools/ToolDrilling.py:570 appTools/ToolMilling.py:494
msgid "Total Drills"
msgstr ""

#: appEditors/AppExcEditor.py:1929 appObjects/FlatCAMExcellon.py:358
#: appTools/ToolDrilling.py:597 appTools/ToolMilling.py:521
msgid "Total Slots"
msgstr ""

#: appEditors/AppExcEditor.py:2003 appObjects/FlatCAMGeometry.py:682
#: appObjects/FlatCAMGeometry.py:1170 appObjects/FlatCAMGeometry.py:1907
#: appObjects/FlatCAMGeometry.py:2566 appTools/ToolIsolation.py:1217
#: appTools/ToolIsolation.py:1667 appTools/ToolNCC.py:1150 appTools/ToolNCC.py:1284
#: appTools/ToolPaint.py:888 appTools/ToolPaint.py:1026 appTools/ToolPaint.py:1739
#: appTools/ToolSolderPaste.py:455 appTools/ToolSolderPaste.py:527
msgid "Wrong value format entered, use a number."
msgstr ""

#: appEditors/AppExcEditor.py:2014
msgid ""
"Tool already in the original or actual tool list.\n"
"Save and reedit Excellon if you need to add this tool. "
msgstr ""

#: appEditors/AppExcEditor.py:2022 appGUI/MainGUI.py:3512
msgid "Added new tool with dia"
msgstr ""

#: appEditors/AppExcEditor.py:2055
msgid "Select a tool in Tool Table"
msgstr ""

#: appEditors/AppExcEditor.py:2085
msgid "Deleted tool with diameter"
msgstr ""

#: appEditors/AppExcEditor.py:2232
msgid "Done. Tool edit completed."
msgstr ""

#: appEditors/AppExcEditor.py:2858
msgid "There are no Tools definitions in the file. Aborting Excellon creation."
msgstr ""

#: appEditors/AppExcEditor.py:2862
msgid "An internal error has ocurred. See Shell.\n"
msgstr ""

#: appEditors/AppExcEditor.py:2867
msgid "Creating Excellon."
msgstr ""

#: appEditors/AppExcEditor.py:2881
msgid "Excellon editing finished."
msgstr ""

#: appEditors/AppExcEditor.py:2897
msgid "Cancelled. There is no Tool/Drill selected"
msgstr ""

#: appEditors/AppExcEditor.py:3123 appEditors/AppExcEditor.py:3130
#: appEditors/AppGeoEditor.py:4233 appEditors/AppGeoEditor.py:4247
#: appEditors/AppGerberEditor.py:1085 appEditors/AppGerberEditor.py:1312
#: appEditors/AppGerberEditor.py:1497 appEditors/AppGerberEditor.py:1766
#: appEditors/AppGerberEditor.py:4625 appEditors/AppGerberEditor.py:4642
#: appGUI/MainGUI.py:2859 appGUI/MainGUI.py:2871 appTools/ToolAlignObjects.py:253
#: appTools/ToolAlignObjects.py:275 app_Main.py:4955 app_Main.py:5109
msgid "Done."
msgstr ""

#: appEditors/AppExcEditor.py:3491
msgid "Done. Drill(s) deleted."
msgstr ""

#: appEditors/AppExcEditor.py:3564 appEditors/AppExcEditor.py:3574
#: appEditors/AppGerberEditor.py:5073
msgid "Click on the circular array Center position"
msgstr ""

#: appEditors/AppExcEditor.py:3705 appGUI/ObjectUI.py:609
#: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:26
msgid "Excellon Editor"
msgstr ""

#: appEditors/AppExcEditor.py:3712 appEditors/AppGerberEditor.py:2469
#: appEditors/appGCodeEditor.py:674
msgid "Name:"
msgstr ""

#: appEditors/AppExcEditor.py:3718 appGUI/ObjectUI.py:530 appGUI/ObjectUI.py:826
#: appTools/ToolIsolation.py:2972 appTools/ToolNCC.py:3765 appTools/ToolPaint.py:2799
#: appTools/ToolSolderPaste.py:1155
msgid "Tools Table"
msgstr ""

#: appEditors/AppExcEditor.py:3720 appGUI/ObjectUI.py:532
msgid ""
"Tools in this Excellon object\n"
"when are used for drilling."
msgstr ""

#: appEditors/AppExcEditor.py:3741
msgid "Convert Slots"
msgstr ""

#: appEditors/AppExcEditor.py:3743
msgid "Convert the slots in the selected tools to drills."
msgstr ""

#: appEditors/AppExcEditor.py:3753
msgid "Add/Delete Tool"
msgstr ""

#: appEditors/AppExcEditor.py:3755
msgid ""
"Add/Delete a tool to the tool list\n"
"for this Excellon object."
msgstr ""

#: appEditors/AppExcEditor.py:3767 appGUI/ObjectUI.py:961
#: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:57
msgid "Diameter for the new tool"
msgstr ""

#: appEditors/AppExcEditor.py:3777
msgid "Add Tool"
msgstr ""

#: appEditors/AppExcEditor.py:3779
msgid ""
"Add a new tool to the tool list\n"
"with the diameter specified above."
msgstr ""

#: appEditors/AppExcEditor.py:3791
msgid "Delete Tool"
msgstr ""

#: appEditors/AppExcEditor.py:3793
msgid ""
"Delete a tool in the tool list\n"
"by selecting a row in the tool table."
msgstr ""

#: appEditors/AppExcEditor.py:3811 appGUI/MainGUI.py:4561
msgid "Resize Drill(s)"
msgstr ""

#: appEditors/AppExcEditor.py:3813
msgid "Resize a drill or a selection of drills."
msgstr ""

#: appEditors/AppExcEditor.py:3820
msgid "Resize Dia"
msgstr ""

#: appEditors/AppExcEditor.py:3822
msgid "Diameter to resize to."
msgstr ""

#: appEditors/AppExcEditor.py:3833
msgid "Resize"
msgstr ""

#: appEditors/AppExcEditor.py:3835
msgid "Resize drill(s)"
msgstr ""

#: appEditors/AppExcEditor.py:3860 appGUI/MainGUI.py:1564 appGUI/MainGUI.py:4560
msgid "Add Drill Array"
msgstr ""

#: appEditors/AppExcEditor.py:3862
msgid "Add an array of drills (linear or circular array)"
msgstr ""

#: appEditors/AppExcEditor.py:3868
msgid ""
"Select the type of drills array to create.\n"
"It can be Linear X(Y) or Circular"
msgstr ""

#: appEditors/AppExcEditor.py:3871 appEditors/AppExcEditor.py:4085
#: appEditors/AppGerberEditor.py:2782
msgid "Linear"
msgstr ""

#: appEditors/AppExcEditor.py:3872 appEditors/AppExcEditor.py:4086
#: appEditors/AppGerberEditor.py:2783
#: appGUI/preferences/tools/Tools2EDrillsPrefGroupUI.py:52
#: appGUI/preferences/tools/Tools2EDrillsPrefGroupUI.py:149
#: appGUI/preferences/tools/Tools2FiducialsPrefGroupUI.py:107
#: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:52
#: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:151
#: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:78
#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:61
#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:70 appTools/ToolExtractDrills.py:470
#: appTools/ToolExtractDrills.py:593 appTools/ToolFiducials.py:834
#: appTools/ToolPunchGerber.py:743 appTools/ToolPunchGerber.py:883
msgid "Circular"
msgstr ""

#: appEditors/AppExcEditor.py:3880
#: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:68
msgid "Nr of drills"
msgstr ""

#: appEditors/AppExcEditor.py:3881
#: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:70
msgid "Specify how many drills to be in the array."
msgstr ""

#: appEditors/AppExcEditor.py:3899 appEditors/AppExcEditor.py:3949
#: appEditors/AppExcEditor.py:4021 appEditors/AppExcEditor.py:4114
#: appEditors/AppExcEditor.py:4165 appEditors/AppGerberEditor.py:1580
#: appEditors/AppGerberEditor.py:2811 appEditors/AppGerberEditor.py:2860
#: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:178
msgid "Direction"
msgstr ""

#: appEditors/AppExcEditor.py:3901 appEditors/AppExcEditor.py:4116
#: appEditors/AppGerberEditor.py:2813
#: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:86
#: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:234
#: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:123
msgid ""
"Direction on which the linear array is oriented:\n"
"- 'X' - horizontal axis \n"
"- 'Y' - vertical axis or \n"
"- 'Angle' - a custom angle for the array inclination"
msgstr ""

#: appEditors/AppExcEditor.py:3908 appEditors/AppExcEditor.py:4030
#: appEditors/AppExcEditor.py:4123 appEditors/AppGerberEditor.py:2820
#: appGUI/GUIElements.py:3470 appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:92
#: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:187
#: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:240
#: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:129
#: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:197 appTools/ToolFilm.py:956
msgid "X"
msgstr ""

#: appEditors/AppExcEditor.py:3909 appEditors/AppExcEditor.py:4031
#: appEditors/AppExcEditor.py:4124 appEditors/AppGerberEditor.py:2821
#: appGUI/GUIElements.py:3477 appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:93
#: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:188
#: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:241
#: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:130
#: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:198 appTools/ToolFilm.py:957
msgid "Y"
msgstr ""

#: appEditors/AppExcEditor.py:3910 appEditors/AppExcEditor.py:3927
#: appEditors/AppExcEditor.py:3961 appEditors/AppExcEditor.py:4032
#: appEditors/AppExcEditor.py:4036 appEditors/AppExcEditor.py:4125
#: appEditors/AppExcEditor.py:4143 appEditors/AppExcEditor.py:4177
#: appEditors/AppGeoEditor.py:683 appEditors/AppGerberEditor.py:2822
#: appEditors/AppGerberEditor.py:2839 appEditors/AppGerberEditor.py:2875
#: appEditors/AppGerberEditor.py:5393
#: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:94
#: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:113
#: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:189
#: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:194
#: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:242
#: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:263
#: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:131
#: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:149
#: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:96 appTools/ToolDistance.py:626
#: appTools/ToolDistanceMin.py:256 appTools/ToolTransform.py:617
msgid "Angle"
msgstr ""

#: appEditors/AppExcEditor.py:3914 appEditors/AppExcEditor.py:4129
#: appEditors/AppGerberEditor.py:2826
#: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:100
#: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:248
#: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:137
msgid "Pitch"
msgstr ""

#: appEditors/AppExcEditor.py:3916 appEditors/AppExcEditor.py:4131
#: appEditors/AppGerberEditor.py:2828
#: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:102
#: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:250
#: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:139
msgid "Pitch = Distance between elements of the array."
msgstr ""

#: appEditors/AppExcEditor.py:3929 appEditors/AppExcEditor.py:4145
msgid ""
"Angle at which the linear array is placed.\n"
"The precision is of max 2 decimals.\n"
"Min value is: -360 degrees.\n"
"Max value is:  360.00 degrees."
msgstr ""

#: appEditors/AppExcEditor.py:3950 appEditors/AppExcEditor.py:4166
#: appEditors/AppGerberEditor.py:2862
msgid "Direction for circular array.Can be CW = clockwise or CCW = counter clockwise."
msgstr ""

#: appEditors/AppExcEditor.py:3957 appEditors/AppExcEditor.py:4173
#: appEditors/AppGerberEditor.py:2870
#: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:136
#: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:286
#: appGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:145
#: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:171
#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:366
msgid "CW"
msgstr ""

#: appEditors/AppExcEditor.py:3958 appEditors/AppExcEditor.py:4174
#: appEditors/AppGerberEditor.py:2871
#: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:137
#: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:287
#: appGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:146
#: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:172
#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:367
msgid "CCW"
msgstr ""

#: appEditors/AppExcEditor.py:3962 appEditors/AppExcEditor.py:4178
#: appEditors/AppGerberEditor.py:2877
#: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:115
#: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:145
#: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:265
#: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:295
#: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:151
#: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:180
msgid "Angle at which each element in circular array is placed."
msgstr ""

#: appEditors/AppExcEditor.py:3996
msgid "Slot Parameters"
msgstr ""

#: appEditors/AppExcEditor.py:3998
msgid ""
"Parameters for adding a slot (hole with oval shape)\n"
"either single or as an part of an array."
msgstr ""

#: appEditors/AppExcEditor.py:4007
#: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:162
#: appGUI/preferences/tools/ToolsCornersPrefGroupUI.py:56 appTools/ToolCorners.py:398
#: appTools/ToolProperties.py:575
msgid "Length"
msgstr ""

#: appEditors/AppExcEditor.py:4009
#: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:164
msgid "Length = The length of the slot."
msgstr ""

#: appEditors/AppExcEditor.py:4023
#: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:180
msgid ""
"Direction on which the slot is oriented:\n"
"- 'X' - horizontal axis \n"
"- 'Y' - vertical axis or \n"
"- 'Angle' - a custom angle for the slot inclination"
msgstr ""

#: appEditors/AppExcEditor.py:4038
msgid ""
"Angle at which the slot is placed.\n"
"The precision is of max 2 decimals.\n"
"Min value is: -360 degrees.\n"
"Max value is:  360.00 degrees."
msgstr ""

#: appEditors/AppExcEditor.py:4071
msgid "Slot Array Parameters"
msgstr ""

#: appEditors/AppExcEditor.py:4073
msgid "Parameters for the array of slots (linear or circular array)"
msgstr ""

#: appEditors/AppExcEditor.py:4082
msgid ""
"Select the type of slot array to create.\n"
"It can be Linear X(Y) or Circular"
msgstr ""

#: appEditors/AppExcEditor.py:4094
#: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:219
msgid "Nr of slots"
msgstr ""

#: appEditors/AppExcEditor.py:4095
#: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:221
msgid "Specify how many slots to be in the array."
msgstr ""

#: appEditors/AppExcEditor.py:4198 appEditors/AppGeoEditor.py:3301
#: appEditors/AppGerberEditor.py:2899 appEditors/appGCodeEditor.py:758
msgid "Exit Editor"
msgstr ""

#: appEditors/AppExcEditor.py:4201 appEditors/AppGeoEditor.py:3304
#: appEditors/AppGerberEditor.py:2902 appEditors/appGCodeEditor.py:761
msgid "Exit from Editor."
msgstr ""

#: appEditors/AppGeoEditor.py:84
msgid "Buffer distance:"
msgstr ""

#: appEditors/AppGeoEditor.py:85
msgid "Buffer corner:"
msgstr ""

#: appEditors/AppGeoEditor.py:87
msgid ""
"There are 3 types of corners:\n"
" - 'Round': the corner is rounded for exterior buffer.\n"
" - 'Square': the corner is met in a sharp angle for exterior buffer.\n"
" - 'Beveled': the corner is a line that directly connects the features meeting in the "
"corner"
msgstr ""

#: appEditors/AppGeoEditor.py:93 appEditors/AppGerberEditor.py:2638
msgid "Round"
msgstr ""

#: appEditors/AppGeoEditor.py:94 appEditors/AppGerberEditor.py:2639 appGUI/ObjectUI.py:1489
#: appGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:225
#: appGUI/preferences/tools/Tools2EDrillsPrefGroupUI.py:68
#: appGUI/preferences/tools/Tools2EDrillsPrefGroupUI.py:175
#: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:68
#: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:177
#: appGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:143
#: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:298
#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:327
#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:291 appTools/ToolDrilling.py:2574
#: appTools/ToolExtractDrills.py:486 appTools/ToolExtractDrills.py:619
#: appTools/ToolIsolation.py:3375 appTools/ToolMilling.py:2264 appTools/ToolNCC.py:4234
#: appTools/ToolPaint.py:3166 appTools/ToolPunchGerber.py:759
#: appTools/ToolPunchGerber.py:909 appTools/ToolQRCode.py:785
msgid "Square"
msgstr ""

#: appEditors/AppGeoEditor.py:95 appEditors/AppGerberEditor.py:2640
msgid "Beveled"
msgstr ""

#: appEditors/AppGeoEditor.py:102
msgid "Buffer Interior"
msgstr ""

#: appEditors/AppGeoEditor.py:104
msgid "Buffer Exterior"
msgstr ""

#: appEditors/AppGeoEditor.py:110
msgid "Full Buffer"
msgstr ""

#: appEditors/AppGeoEditor.py:131 appEditors/AppGeoEditor.py:2959 appGUI/MainGUI.py:4470
#: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:191
msgid "Buffer Tool"
msgstr ""

#: appEditors/AppGeoEditor.py:143 appEditors/AppGeoEditor.py:160
#: appEditors/AppGeoEditor.py:177 appEditors/AppGeoEditor.py:2978
#: appEditors/AppGeoEditor.py:3006 appEditors/AppGeoEditor.py:3034
#: appEditors/AppGerberEditor.py:5126
msgid "Buffer distance value is missing or wrong format. Add it and retry."
msgstr ""

#: appEditors/AppGeoEditor.py:241
msgid "Font"
msgstr ""

#: appEditors/AppGeoEditor.py:322 appGUI/MainGUI.py:1502
msgid "Text"
msgstr ""

#: appEditors/AppGeoEditor.py:348
msgid "Text Tool"
msgstr ""

#: appEditors/AppGeoEditor.py:404 appGUI/MainGUI.py:511 appGUI/MainGUI.py:1245
#: appGUI/ObjectUI.py:1047 appObjects/FlatCAMExcellon.py:854
#: appObjects/FlatCAMGeometry.py:888 appTools/ToolDrilling.py:710
#: appTools/ToolDrilling.py:1019 appTools/ToolDrilling.py:2102 appTools/ToolIsolation.py:691
#: appTools/ToolIsolation.py:3121 appTools/ToolMilling.py:790 appTools/ToolMilling.py:1046
#: appTools/ToolMilling.py:1711 appTools/ToolNCC.py:324 appTools/ToolNCC.py:2230
#: appTools/ToolNCC.py:3926 appTools/ToolPaint.py:304 appTools/ToolPaint.py:2938
msgid "Tool"
msgstr ""

#: appEditors/AppGeoEditor.py:438
msgid "Tool dia"
msgstr ""

#: appEditors/AppGeoEditor.py:440
msgid "Diameter of the tool to be used in the operation."
msgstr ""

#: appEditors/AppGeoEditor.py:486
msgid ""
"Algorithm to paint the polygons:\n"
"- Standard: Fixed step inwards.\n"
"- Seed-based: Outwards from seed.\n"
"- Line-based: Parallel lines."
msgstr ""

#: appEditors/AppGeoEditor.py:505
msgid "Connect:"
msgstr ""

#: appEditors/AppGeoEditor.py:515
msgid "Contour:"
msgstr ""

#: appEditors/AppGeoEditor.py:546 appGUI/MainGUI.py:935 appGUI/MainGUI.py:2090
#: appGUI/ObjectUI.py:1642 appTools/ToolPaint.py:228 appTools/ToolPaint.py:2729
msgid "Paint Tool"
msgstr ""

#: appEditors/AppGeoEditor.py:582 appEditors/AppGeoEditor.py:1071
#: appEditors/AppGeoEditor.py:2966 appEditors/AppGeoEditor.py:2994
#: appEditors/AppGeoEditor.py:3022 appEditors/AppGeoEditor.py:4386
#: appEditors/AppGerberEditor.py:5781
msgid "Cancelled. No shape selected."
msgstr ""

#: appEditors/AppGeoEditor.py:595 appEditors/AppGeoEditor.py:2984
#: appEditors/AppGeoEditor.py:3012 appEditors/AppGeoEditor.py:3040
#: appGUI/preferences/geometry/GeometryGenPrefGroupUI.py:71 appTools/ToolProperties.py:117
#: appTools/ToolProperties.py:165
msgid "Tools"
msgstr ""

#: appEditors/AppGeoEditor.py:606 appEditors/AppGeoEditor.py:1035
#: appEditors/AppGerberEditor.py:5316 appEditors/AppGerberEditor.py:5745
#: appGUI/MainGUI.py:960 appGUI/MainGUI.py:2115 appTools/ToolTransform.py:85
msgid "Transform Tool"
msgstr ""

#: appEditors/AppGeoEditor.py:607 appEditors/AppGeoEditor.py:699
#: appEditors/AppGerberEditor.py:5317 appEditors/AppGerberEditor.py:5409
#: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:88 appTools/ToolTransform.py:513
#: appTools/ToolTransform.py:633
msgid "Rotate"
msgstr ""

#: appEditors/AppGeoEditor.py:608 appEditors/AppGerberEditor.py:5318
#: appTools/ToolTransform.py:514
msgid "Skew/Shear"
msgstr ""

#: appEditors/AppGeoEditor.py:609 appEditors/AppGerberEditor.py:2687
#: appEditors/AppGerberEditor.py:5319 appGUI/MainGUI.py:1082 appGUI/MainGUI.py:1549
#: appGUI/MainGUI.py:2237 appGUI/MainGUI.py:4682 appGUI/ObjectUI.py:125
#: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:147 appTools/ToolTransform.py:515
msgid "Scale"
msgstr ""

#: appEditors/AppGeoEditor.py:610 appEditors/AppGerberEditor.py:5320
#: appTools/ToolTransform.py:516
msgid "Mirror (Flip)"
msgstr ""

#: appEditors/AppGeoEditor.py:612 appEditors/AppGerberEditor.py:2647
#: appEditors/AppGerberEditor.py:5322 appGUI/MainGUI.py:1080 appGUI/MainGUI.py:1504
#: appGUI/MainGUI.py:1547 appGUI/MainGUI.py:2235 appGUI/MainGUI.py:4680
#: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:212 appTools/ToolTransform.py:518
msgid "Buffer"
msgstr ""

#: appEditors/AppGeoEditor.py:643 appEditors/AppGerberEditor.py:5353
#: appGUI/GUIElements.py:2947 appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:169
#: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:44 appTools/ToolDblSided.py:688
#: appTools/ToolDblSided.py:864 appTools/ToolFilm.py:913 appTools/ToolTransform.py:547
msgid "Reference"
msgstr ""

#: appEditors/AppGeoEditor.py:645 appEditors/AppGerberEditor.py:5355
msgid ""
"The reference point for Rotate, Skew, Scale, Mirror.\n"
"Can be:\n"
"- Origin -> it is the 0, 0 point\n"
"- Selection -> the center of the bounding box of the selected objects\n"
"- Point -> a custom point defined by X,Y coordinates\n"
"- Min Selection -> the point (minx, miny) of the bounding box of the selection"
msgstr ""

#: appEditors/AppGeoEditor.py:653 appEditors/AppGerberEditor.py:5363
#: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:54 appTools/ToolCalibration.py:126
#: appTools/ToolCalibration.py:127 appTools/ToolTransform.py:557
msgid "Origin"
msgstr ""

#: appEditors/AppGeoEditor.py:653 appEditors/AppGeoEditor.py:1044
#: appEditors/AppGerberEditor.py:5363 appEditors/AppGerberEditor.py:5754
#: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:250
#: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:275
#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:311
#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:258
#: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:54 appTools/ToolIsolation.py:3313
#: appTools/ToolNCC.py:4190 appTools/ToolPaint.py:3095 appTools/ToolTransform.py:557
#: defaults.py:557
msgid "Selection"
msgstr ""

#: appEditors/AppGeoEditor.py:653 appEditors/AppGerberEditor.py:5363
#: appGUI/preferences/tools/Tools2sidedPrefGroupUI.py:85
#: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:54
#: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:60 appTools/ToolDblSided.py:699
#: appTools/ToolTransform.py:557
msgid "Point"
msgstr ""

#: appEditors/AppGeoEditor.py:653 appEditors/AppGerberEditor.py:5363
msgid "Minimum"
msgstr ""

#: appEditors/AppGeoEditor.py:659 appEditors/AppGeoEditor.py:955
#: appEditors/AppGerberEditor.py:5369 appEditors/AppGerberEditor.py:5665
#: appGUI/preferences/tools/Tools2EDrillsPrefGroupUI.py:131
#: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:133
#: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:243
#: appTools/ToolExtractDrills.py:556 appTools/ToolExtractDrills.py:677
#: appTools/ToolPunchGerber.py:846 appTools/ToolPunchGerber.py:962
#: appTools/ToolTransform.py:563 appTools/ToolTransform.py:889 app_Main.py:10219
msgid "Value"
msgstr ""

#: appEditors/AppGeoEditor.py:661 appEditors/AppGerberEditor.py:5371
#: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:62 appTools/ToolTransform.py:565
msgid "A point of reference in format X,Y."
msgstr ""

#: appEditors/AppGeoEditor.py:668 appEditors/AppGerberEditor.py:2590
#: appEditors/AppGerberEditor.py:5378 appGUI/ObjectUI.py:973 appGUI/ObjectUI.py:2151
#: appTools/ToolDblSided.py:713 appTools/ToolDblSided.py:901 appTools/ToolNCC.py:63
#: appTools/ToolPaint.py:137 appTools/ToolSolderPaste.py:160
#: appTools/ToolSolderPaste.py:1203 appTools/ToolTransform.py:572 app_Main.py:6121
msgid "Add"
msgstr ""

#: appEditors/AppGeoEditor.py:670 appEditors/AppGerberEditor.py:5380
#: appTools/ToolTransform.py:574
msgid "Add point coordinates from clipboard."
msgstr ""

#: appEditors/AppGeoEditor.py:685 appEditors/AppGerberEditor.py:5395
#: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:98 appTools/ToolTransform.py:619
msgid ""
"Angle for Rotation action, in degrees.\n"
"Float number between -360 and 359.\n"
"Positive numbers for CW motion.\n"
"Negative numbers for CCW motion."
msgstr ""

#: appEditors/AppGeoEditor.py:701 appEditors/AppGerberEditor.py:5411
#: appTools/ToolTransform.py:635
msgid ""
"Rotate the selected object(s).\n"
"The point of reference is the middle of\n"
"the bounding box for all selected objects."
msgstr ""

#: appEditors/AppGeoEditor.py:721 appEditors/AppGeoEditor.py:783
#: appEditors/AppGerberEditor.py:5431 appEditors/AppGerberEditor.py:5493
#: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:112
#: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:151 appTools/ToolTransform.py:655
#: appTools/ToolTransform.py:717
msgid "Link"
msgstr ""

#: appEditors/AppGeoEditor.py:723 appEditors/AppGeoEditor.py:785
#: appEditors/AppGerberEditor.py:5433 appEditors/AppGerberEditor.py:5495
#: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:114
#: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:153 appTools/ToolTransform.py:657
#: appTools/ToolTransform.py:719
msgid "Link the Y entry to X entry and copy its content."
msgstr ""

#: appEditors/AppGeoEditor.py:728 appEditors/AppGerberEditor.py:5438
#: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:151
#: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:124 appTools/ToolFilm.py:895
#: appTools/ToolTransform.py:662
msgid "X angle"
msgstr ""

#: appEditors/AppGeoEditor.py:730 appEditors/AppGeoEditor.py:751
#: appEditors/AppGerberEditor.py:5440 appEditors/AppGerberEditor.py:5461
#: appTools/ToolTransform.py:664 appTools/ToolTransform.py:685
msgid ""
"Angle for Skew action, in degrees.\n"
"Float number between -360 and 360."
msgstr ""

#: appEditors/AppGeoEditor.py:738 appEditors/AppGerberEditor.py:5448
#: appTools/ToolTransform.py:672
msgid "Skew X"
msgstr ""

#: appEditors/AppGeoEditor.py:740 appEditors/AppGeoEditor.py:761
#: appEditors/AppGerberEditor.py:5450 appEditors/AppGerberEditor.py:5471
#: appTools/ToolTransform.py:674 appTools/ToolTransform.py:695
msgid ""
"Skew/shear the selected object(s).\n"
"The point of reference is the middle of\n"
"the bounding box for all selected objects."
msgstr ""

#: appEditors/AppGeoEditor.py:749 appEditors/AppGerberEditor.py:5459
#: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:160
#: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:138 appTools/ToolFilm.py:904
#: appTools/ToolTransform.py:683
msgid "Y angle"
msgstr ""

#: appEditors/AppGeoEditor.py:759 appEditors/AppGerberEditor.py:5469
#: appTools/ToolTransform.py:693
msgid "Skew Y"
msgstr ""

#: appEditors/AppGeoEditor.py:790 appEditors/AppGerberEditor.py:5500
#: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:120
#: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:162 appTools/ToolFilm.py:851
#: appTools/ToolTransform.py:724
msgid "X factor"
msgstr ""

#: appEditors/AppGeoEditor.py:792 appEditors/AppGerberEditor.py:5502
#: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:164 appTools/ToolTransform.py:726
msgid "Factor for scaling on X axis."
msgstr ""

#: appEditors/AppGeoEditor.py:799 appEditors/AppGerberEditor.py:5509
#: appTools/ToolTransform.py:733
msgid "Scale X"
msgstr ""

#: appEditors/AppGeoEditor.py:801 appEditors/AppGeoEditor.py:821
#: appEditors/AppGerberEditor.py:5511 appEditors/AppGerberEditor.py:5531
#: appTools/ToolTransform.py:735 appTools/ToolTransform.py:755
msgid ""
"Scale the selected object(s).\n"
"The point of reference depends on \n"
"the Scale reference checkbox state."
msgstr ""

#: appEditors/AppGeoEditor.py:810 appEditors/AppGerberEditor.py:5520
#: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:129
#: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:175 appTools/ToolFilm.py:860
#: appTools/ToolTransform.py:744
msgid "Y factor"
msgstr ""

#: appEditors/AppGeoEditor.py:812 appEditors/AppGerberEditor.py:5522
#: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:177 appTools/ToolTransform.py:746
msgid "Factor for scaling on Y axis."
msgstr ""

#: appEditors/AppGeoEditor.py:819 appEditors/AppGerberEditor.py:5529
#: appTools/ToolTransform.py:753
msgid "Scale Y"
msgstr ""

#: appEditors/AppGeoEditor.py:846 appEditors/AppGerberEditor.py:5556
#: appTools/ToolTransform.py:780
msgid "Flip on X"
msgstr ""

#: appEditors/AppGeoEditor.py:848 appEditors/AppGeoEditor.py:853
#: appEditors/AppGerberEditor.py:5558 appEditors/AppGerberEditor.py:5563
#: appTools/ToolTransform.py:782 appTools/ToolTransform.py:787
msgid "Flip the selected object(s) over the X axis."
msgstr ""

#: appEditors/AppGeoEditor.py:851 appEditors/AppGerberEditor.py:5561
#: appTools/ToolTransform.py:785
msgid "Flip on Y"
msgstr ""

#: appEditors/AppGeoEditor.py:871 appEditors/AppGerberEditor.py:5581
#: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:191 appTools/ToolTransform.py:805
msgid "X val"
msgstr ""

#: appEditors/AppGeoEditor.py:873 appEditors/AppGerberEditor.py:5583
#: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:193 appTools/ToolTransform.py:807
msgid "Distance to offset on X axis. In current units."
msgstr ""

#: appEditors/AppGeoEditor.py:880 appEditors/AppGerberEditor.py:5590
#: appTools/ToolTransform.py:814
msgid "Offset X"
msgstr ""

#: appEditors/AppGeoEditor.py:882 appEditors/AppGeoEditor.py:902
#: appEditors/AppGerberEditor.py:5592 appEditors/AppGerberEditor.py:5612
#: appTools/ToolTransform.py:816 appTools/ToolTransform.py:836
msgid ""
"Offset the selected object(s).\n"
"The point of reference is the middle of\n"
"the bounding box for all selected objects.\n"
msgstr ""

#: appEditors/AppGeoEditor.py:891 appEditors/AppGerberEditor.py:5601
#: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:204 appTools/ToolTransform.py:825
msgid "Y val"
msgstr ""

#: appEditors/AppGeoEditor.py:893 appEditors/AppGerberEditor.py:5603
#: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:206 appTools/ToolTransform.py:827
msgid "Distance to offset on Y axis. In current units."
msgstr ""

#: appEditors/AppGeoEditor.py:900 appEditors/AppGerberEditor.py:5610
#: appTools/ToolTransform.py:834
msgid "Offset Y"
msgstr ""

#: appEditors/AppGeoEditor.py:920 appEditors/AppGerberEditor.py:5630 appGUI/ObjectUI.py:410
#: appGUI/ObjectUI.py:447 appGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:142
#: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:216 appTools/ToolQRCode.py:784
#: appTools/ToolTransform.py:854
msgid "Rounded"
msgstr ""

#: appEditors/AppGeoEditor.py:922 appEditors/AppGerberEditor.py:5632
#: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:218 appTools/ToolTransform.py:856
msgid ""
"If checked then the buffer will surround the buffered shape,\n"
"every corner will be rounded.\n"
"If not checked then the buffer will follow the exact geometry\n"
"of the buffered shape."
msgstr ""

#: appEditors/AppGeoEditor.py:930 appEditors/AppGerberEditor.py:5640
#: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:226 appTools/ToolDistance.py:408
#: appTools/ToolDistanceMin.py:199 appTools/ToolTransform.py:864
msgid "Distance"
msgstr ""

#: appEditors/AppGeoEditor.py:932 appEditors/AppGerberEditor.py:5642
#: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:228 appTools/ToolTransform.py:866
msgid ""
"A positive value will create the effect of dilation,\n"
"while a negative value will create the effect of erosion.\n"
"Each geometry element of the object will be increased\n"
"or decreased with the 'distance'."
msgstr ""

#: appEditors/AppGeoEditor.py:944 appEditors/AppGerberEditor.py:5654
#: appTools/ToolTransform.py:878
msgid "Buffer D"
msgstr ""

#: appEditors/AppGeoEditor.py:946 appEditors/AppGerberEditor.py:5656
#: appTools/ToolTransform.py:880
msgid ""
"Create the buffer effect on each geometry,\n"
"element from the selected object, using the distance."
msgstr ""

#: appEditors/AppGeoEditor.py:957 appEditors/AppGerberEditor.py:5667
#: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:245 appTools/ToolTransform.py:891
msgid ""
"A positive value will create the effect of dilation,\n"
"while a negative value will create the effect of erosion.\n"
"Each geometry element of the object will be increased\n"
"or decreased to fit the 'Value'. Value is a percentage\n"
"of the initial dimension."
msgstr ""

#: appEditors/AppGeoEditor.py:970 appEditors/AppGerberEditor.py:5680
#: appTools/ToolTransform.py:904
msgid "Buffer F"
msgstr ""

#: appEditors/AppGeoEditor.py:972 appEditors/AppGerberEditor.py:5682
#: appTools/ToolTransform.py:906
msgid ""
"Create the buffer effect on each geometry,\n"
"element from the selected object, using the factor."
msgstr ""

#: appEditors/AppGeoEditor.py:1043 appEditors/AppGerberEditor.py:5753
#: appGUI/ObjectUI.py:1443 appGUI/preferences/tools/Tools2CalPrefGroupUI.py:48
#: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:54
#: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:70 appTools/ToolCalibration.py:881
#: appTools/ToolDrilling.py:2526 appTools/ToolFilm.py:784 appTools/ToolMilling.py:2218
#: appTools/ToolNCC.py:3754 appTools/ToolPaint.py:2787 appTools/ToolPanelize.py:697
#: appTools/ToolTransform.py:557
msgid "Object"
msgstr ""

#: appEditors/AppGeoEditor.py:1107 appEditors/AppGeoEditor.py:1130
#: appEditors/AppGeoEditor.py:1276 appEditors/AppGeoEditor.py:1301
#: appEditors/AppGeoEditor.py:1335 appEditors/AppGeoEditor.py:1370
#: appEditors/AppGeoEditor.py:1401 appEditors/AppGerberEditor.py:5817
#: appEditors/AppGerberEditor.py:5840 appEditors/AppGerberEditor.py:5985
#: appEditors/AppGerberEditor.py:6018 appEditors/AppGerberEditor.py:6061
#: appEditors/AppGerberEditor.py:6102 appEditors/AppGerberEditor.py:6138
msgid "No shape selected."
msgstr ""

#: appEditors/AppGeoEditor.py:1115 appEditors/AppGerberEditor.py:5825
#: appTools/ToolTransform.py:150
msgid "Incorrect format for Point value. Needs format X,Y"
msgstr ""

#: appEditors/AppGeoEditor.py:1140 appEditors/AppGerberEditor.py:5850
#: appTools/ToolTransform.py:167
msgid "Rotate transformation can not be done for a value of 0."
msgstr ""

#: appEditors/AppGeoEditor.py:1198 appEditors/AppGeoEditor.py:1219
#: appEditors/AppGerberEditor.py:5908 appEditors/AppGerberEditor.py:5929
#: appTools/ToolTransform.py:225 appTools/ToolTransform.py:246
msgid "Scale transformation can not be done for a factor of 0 or 1."
msgstr ""

#: appEditors/AppGeoEditor.py:1232 appEditors/AppGeoEditor.py:1241
#: appEditors/AppGerberEditor.py:5942 appEditors/AppGerberEditor.py:5951
#: appTools/ToolTransform.py:259 appTools/ToolTransform.py:268
msgid "Offset transformation can not be done for a value of 0."
msgstr ""

#: appEditors/AppGeoEditor.py:1271 appEditors/AppGerberEditor.py:5988
#: appTools/ToolTransform.py:296
msgid "Appying Rotate"
msgstr ""

#: appEditors/AppGeoEditor.py:1284 appEditors/AppGerberEditor.py:6000
msgid "Done. Rotate completed."
msgstr ""

#: appEditors/AppGeoEditor.py:1286
msgid "Rotation action was not executed"
msgstr ""

#: appEditors/AppGeoEditor.py:1304 appEditors/AppGerberEditor.py:6021
#: appTools/ToolTransform.py:322
msgid "Applying Flip"
msgstr ""

#: appEditors/AppGeoEditor.py:1312 appEditors/AppGerberEditor.py:6033
#: appTools/ToolTransform.py:339
msgid "Flip on the Y axis done"
msgstr ""

#: appEditors/AppGeoEditor.py:1315 appEditors/AppGerberEditor.py:6041
#: appTools/ToolTransform.py:348
msgid "Flip on the X axis done"
msgstr ""

#: appEditors/AppGeoEditor.py:1319
msgid "Flip action was not executed"
msgstr ""

#: appEditors/AppGeoEditor.py:1338 appEditors/AppGerberEditor.py:6064
#: appTools/ToolTransform.py:369
msgid "Applying Skew"
msgstr ""

#: appEditors/AppGeoEditor.py:1347 appEditors/AppGerberEditor.py:6080
msgid "Skew on the X axis done"
msgstr ""

#: appEditors/AppGeoEditor.py:1349 appEditors/AppGerberEditor.py:6082
msgid "Skew on the Y axis done"
msgstr ""

#: appEditors/AppGeoEditor.py:1352
msgid "Skew action was not executed"
msgstr ""

#: appEditors/AppGeoEditor.py:1373 appEditors/AppGerberEditor.py:6105
#: appTools/ToolTransform.py:396
msgid "Applying Scale"
msgstr ""

#: appEditors/AppGeoEditor.py:1382 appEditors/AppGerberEditor.py:6118
msgid "Scale on the X axis done"
msgstr ""

#: appEditors/AppGeoEditor.py:1384 appEditors/AppGerberEditor.py:6120
msgid "Scale on the Y axis done"
msgstr ""

#: appEditors/AppGeoEditor.py:1386
msgid "Scale action was not executed"
msgstr ""

#: appEditors/AppGeoEditor.py:1404 appEditors/AppGerberEditor.py:6141
#: appTools/ToolTransform.py:424
msgid "Applying Offset"
msgstr ""

#: appEditors/AppGeoEditor.py:1414 appEditors/AppGerberEditor.py:6162
msgid "Offset on the X axis done"
msgstr ""

#: appEditors/AppGeoEditor.py:1416 appEditors/AppGerberEditor.py:6164
msgid "Offset on the Y axis done"
msgstr ""

#: appEditors/AppGeoEditor.py:1419
msgid "Offset action was not executed"
msgstr ""

#: appEditors/AppGeoEditor.py:1426 appEditors/AppGerberEditor.py:6174
msgid "No shape selected"
msgstr ""

#: appEditors/AppGeoEditor.py:1429 appEditors/AppGerberEditor.py:6177
#: appTools/ToolTransform.py:453
msgid "Applying Buffer"
msgstr ""

#: appEditors/AppGeoEditor.py:1436 appEditors/AppGerberEditor.py:6199
#: appTools/ToolTransform.py:474
msgid "Buffer done"
msgstr ""

#: appEditors/AppGeoEditor.py:1440 appEditors/AppGerberEditor.py:6203
#: appTools/ToolTransform.py:443 appTools/ToolTransform.py:478
msgid "Action was not executed, due of"
msgstr ""

#: appEditors/AppGeoEditor.py:1444 appEditors/AppGerberEditor.py:6207
msgid "Rotate ..."
msgstr ""

#: appEditors/AppGeoEditor.py:1445 appEditors/AppGeoEditor.py:1494
#: appEditors/AppGeoEditor.py:1509 appEditors/AppGerberEditor.py:6208
#: appEditors/AppGerberEditor.py:6257 appEditors/AppGerberEditor.py:6272
msgid "Enter an Angle Value (degrees)"
msgstr ""

#: appEditors/AppGeoEditor.py:1453 appEditors/AppGerberEditor.py:6216
msgid "Geometry shape rotate done"
msgstr ""

#: appEditors/AppGeoEditor.py:1456 appEditors/AppGerberEditor.py:6219
msgid "Geometry shape rotate cancelled"
msgstr ""

#: appEditors/AppGeoEditor.py:1461 appEditors/AppGerberEditor.py:6224
msgid "Offset on X axis ..."
msgstr ""

#: appEditors/AppGeoEditor.py:1462 appEditors/AppGeoEditor.py:1479
#: appEditors/AppGerberEditor.py:6225 appEditors/AppGerberEditor.py:6242
msgid "Enter a distance Value"
msgstr ""

#: appEditors/AppGeoEditor.py:1470 appEditors/AppGerberEditor.py:6233
msgid "Geometry shape offset on X axis done"
msgstr ""

#: appEditors/AppGeoEditor.py:1473 appEditors/AppGerberEditor.py:6236
msgid "Geometry shape offset X cancelled"
msgstr ""

#: appEditors/AppGeoEditor.py:1478 appEditors/AppGerberEditor.py:6241
msgid "Offset on Y axis ..."
msgstr ""

#: appEditors/AppGeoEditor.py:1487 appEditors/AppGerberEditor.py:6250
msgid "Geometry shape offset on Y axis done"
msgstr ""

#: appEditors/AppGeoEditor.py:1490
msgid "Geometry shape offset on Y axis canceled"
msgstr ""

#: appEditors/AppGeoEditor.py:1493 appEditors/AppGerberEditor.py:6256
msgid "Skew on X axis ..."
msgstr ""

#: appEditors/AppGeoEditor.py:1502 appEditors/AppGerberEditor.py:6265
msgid "Geometry shape skew on X axis done"
msgstr ""

#: appEditors/AppGeoEditor.py:1505
msgid "Geometry shape skew on X axis canceled"
msgstr ""

#: appEditors/AppGeoEditor.py:1508 appEditors/AppGerberEditor.py:6271
msgid "Skew on Y axis ..."
msgstr ""

#: appEditors/AppGeoEditor.py:1517 appEditors/AppGerberEditor.py:6280
msgid "Geometry shape skew on Y axis done"
msgstr ""

#: appEditors/AppGeoEditor.py:1520
msgid "Geometry shape skew on Y axis canceled"
msgstr ""

#: appEditors/AppGeoEditor.py:1950 appEditors/AppGeoEditor.py:2021
#: appEditors/AppGerberEditor.py:1444 appEditors/AppGerberEditor.py:1522
msgid "Click on Center point ..."
msgstr ""

#: appEditors/AppGeoEditor.py:1963 appEditors/AppGerberEditor.py:1454
msgid "Click on Perimeter point to complete ..."
msgstr ""

#: appEditors/AppGeoEditor.py:1995
msgid "Done. Adding Circle completed."
msgstr ""

#: appEditors/AppGeoEditor.py:2049 appEditors/AppGerberEditor.py:1555
msgid "Click on Start point ..."
msgstr ""

#: appEditors/AppGeoEditor.py:2051 appEditors/AppGerberEditor.py:1557
msgid "Click on Point3 ..."
msgstr ""

#: appEditors/AppGeoEditor.py:2053 appEditors/AppGerberEditor.py:1559
msgid "Click on Stop point ..."
msgstr ""

#: appEditors/AppGeoEditor.py:2058 appEditors/AppGerberEditor.py:1564
msgid "Click on Stop point to complete ..."
msgstr ""

#: appEditors/AppGeoEditor.py:2060 appEditors/AppGerberEditor.py:1566
msgid "Click on Point2 to complete ..."
msgstr ""

#: appEditors/AppGeoEditor.py:2062 appEditors/AppGerberEditor.py:1568
msgid "Click on Center point to complete ..."
msgstr ""

#: appEditors/AppGeoEditor.py:2074
#, python-format
msgid "Direction: %s"
msgstr ""

#: appEditors/AppGeoEditor.py:2088 appEditors/AppGerberEditor.py:1594
msgid "Mode: Start -> Stop -> Center. Click on Start point ..."
msgstr ""

#: appEditors/AppGeoEditor.py:2091 appEditors/AppGerberEditor.py:1597
msgid "Mode: Point1 -> Point3 -> Point2. Click on Point1 ..."
msgstr ""

#: appEditors/AppGeoEditor.py:2094 appEditors/AppGerberEditor.py:1600
msgid "Mode: Center -> Start -> Stop. Click on Center point ..."
msgstr ""

#: appEditors/AppGeoEditor.py:2235
msgid "Done. Arc completed."
msgstr ""

#: appEditors/AppGeoEditor.py:2266 appEditors/AppGeoEditor.py:2339
msgid "Click on 1st corner ..."
msgstr ""

#: appEditors/AppGeoEditor.py:2278
msgid "Click on opposite corner to complete ..."
msgstr ""

#: appEditors/AppGeoEditor.py:2308
msgid "Done. Rectangle completed."
msgstr ""

#: appEditors/AppGeoEditor.py:2383
msgid "Done. Polygon completed."
msgstr ""

#: appEditors/AppGeoEditor.py:2397 appEditors/AppGeoEditor.py:2462
#: appEditors/AppGerberEditor.py:1102 appEditors/AppGerberEditor.py:1322
msgid "Backtracked one point ..."
msgstr ""

#: appEditors/AppGeoEditor.py:2440
msgid "Done. Path completed."
msgstr ""

#: appEditors/AppGeoEditor.py:2599
msgid "No shape selected. Select a shape to explode"
msgstr ""

#: appEditors/AppGeoEditor.py:2632
msgid "Done. Polygons exploded into lines."
msgstr ""

#: appEditors/AppGeoEditor.py:2664
msgid "MOVE: No shape selected. Select a shape to move"
msgstr ""

#: appEditors/AppGeoEditor.py:2667 appEditors/AppGeoEditor.py:2687
msgid " MOVE: Click on reference point ..."
msgstr ""

#: appEditors/AppGeoEditor.py:2672
msgid " Click on destination point ..."
msgstr ""

#: appEditors/AppGeoEditor.py:2712
msgid "Done. Geometry(s) Move completed."
msgstr ""

#: appEditors/AppGeoEditor.py:2845
msgid "Done. Geometry(s) Copy completed."
msgstr ""

#: appEditors/AppGeoEditor.py:2876 appEditors/AppGerberEditor.py:897
msgid "Click on 1st point ..."
msgstr ""

#: appEditors/AppGeoEditor.py:2900
msgid "Font not supported. Only Regular, Bold, Italic and BoldItalic are supported. Error"
msgstr ""

#: appEditors/AppGeoEditor.py:2908
msgid "No text to add."
msgstr ""

#: appEditors/AppGeoEditor.py:2918
msgid " Done. Adding Text completed."
msgstr ""

#: appEditors/AppGeoEditor.py:2955
msgid "Create buffer geometry ..."
msgstr ""

#: appEditors/AppGeoEditor.py:2990 appEditors/AppGerberEditor.py:5170
msgid "Done. Buffer Tool completed."
msgstr ""

#: appEditors/AppGeoEditor.py:3018
msgid "Done. Buffer Int Tool completed."
msgstr ""

#: appEditors/AppGeoEditor.py:3046
msgid "Done. Buffer Ext Tool completed."
msgstr ""

#: appEditors/AppGeoEditor.py:3095 appEditors/AppGerberEditor.py:2160
msgid "Select a shape to act as deletion area ..."
msgstr ""

#: appEditors/AppGeoEditor.py:3097 appEditors/AppGeoEditor.py:3123
#: appEditors/AppGeoEditor.py:3129 appEditors/AppGerberEditor.py:2162
msgid "Click to pick-up the erase shape..."
msgstr ""

#: appEditors/AppGeoEditor.py:3133 appEditors/AppGerberEditor.py:2221
msgid "Click to erase ..."
msgstr ""

#: appEditors/AppGeoEditor.py:3162 appEditors/AppGerberEditor.py:2254
msgid "Done. Eraser tool action completed."
msgstr ""

#: appEditors/AppGeoEditor.py:3212
msgid "Create Paint geometry ..."
msgstr ""

#: appEditors/AppGeoEditor.py:3225 appEditors/AppGerberEditor.py:2417
msgid "Shape transformations ..."
msgstr ""

#: appEditors/AppGeoEditor.py:3281 appGUI/ObjectUI.py:914
#: appGUI/preferences/geometry/GeometryEditorPrefGroupUI.py:27
msgid "Geometry Editor"
msgstr ""

#: appEditors/AppGeoEditor.py:3287 appEditors/AppGerberEditor.py:2495
#: appEditors/AppGerberEditor.py:3968 appEditors/appGCodeEditor.py:692
#: appGUI/ObjectUI.py:276 appGUI/ObjectUI.py:858 appGUI/ObjectUI.py:1830
#: appTools/ToolCutOut.py:1772 appTools/ToolDblSided.py:519 appTools/ToolTransform.py:579
msgid "Type"
msgstr ""

#: appEditors/AppGeoEditor.py:3557
msgid "Ring"
msgstr ""

#: appEditors/AppGeoEditor.py:3559
msgid "Line"
msgstr ""

#: appEditors/AppGeoEditor.py:3561 appGUI/MainGUI.py:1496 appGUI/ObjectUI.py:1490
#: appGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:226
#: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:299
#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:328
#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:292 appTools/ToolDrilling.py:2575
#: appTools/ToolIsolation.py:3376 appTools/ToolMilling.py:2265 appTools/ToolNCC.py:4235
#: appTools/ToolPaint.py:3167
msgid "Polygon"
msgstr ""

#: appEditors/AppGeoEditor.py:3563
msgid "Multi-Line"
msgstr ""

#: appEditors/AppGeoEditor.py:3565
msgid "Multi-Polygon"
msgstr ""

#: appEditors/AppGeoEditor.py:3572
msgid "Geo Elem"
msgstr ""

#: appEditors/AppGeoEditor.py:4028
msgid "Grid Snap enabled."
msgstr ""

#: appEditors/AppGeoEditor.py:4032
msgid "Grid Snap disabled."
msgstr ""

#: appEditors/AppGeoEditor.py:4393 appGUI/MainGUI.py:3194 appGUI/MainGUI.py:3240
#: appGUI/MainGUI.py:3258 appGUI/MainGUI.py:3402 appGUI/MainGUI.py:3441
#: appGUI/MainGUI.py:3453 appGUI/MainGUI.py:3470
msgid "Click on target point."
msgstr ""

#: appEditors/AppGeoEditor.py:4675
msgid "Editing MultiGeo Geometry, tool"
msgstr ""

#: appEditors/AppGeoEditor.py:4677 appTools/ToolNCC.py:2232
msgid "with diameter"
msgstr ""

#: appEditors/AppGeoEditor.py:4780 appEditors/AppGeoEditor.py:4815
msgid "A selection of at least 2 geo items is required to do Intersection."
msgstr ""

#: appEditors/AppGeoEditor.py:4901 appEditors/AppGeoEditor.py:5005
msgid ""
"Negative buffer value is not accepted. Use Buffer interior to generate an 'inside' shape"
msgstr ""

#: appEditors/AppGeoEditor.py:4911 appEditors/AppGeoEditor.py:4964
#: appEditors/AppGeoEditor.py:5014
msgid "Nothing selected for buffering."
msgstr ""

#: appEditors/AppGeoEditor.py:4916 appEditors/AppGeoEditor.py:4968
#: appEditors/AppGeoEditor.py:5019
msgid "Invalid distance for buffering."
msgstr ""

#: appEditors/AppGeoEditor.py:4940 appEditors/AppGeoEditor.py:5039
msgid "Failed, the result is empty. Choose a different buffer value."
msgstr ""

#: appEditors/AppGeoEditor.py:4951
msgid "Full buffer geometry created."
msgstr ""

#: appEditors/AppGeoEditor.py:4957
msgid "Negative buffer value is not accepted."
msgstr ""

#: appEditors/AppGeoEditor.py:4988
msgid "Failed, the result is empty. Choose a smaller buffer value."
msgstr ""

#: appEditors/AppGeoEditor.py:4998
msgid "Interior buffer geometry created."
msgstr ""

#: appEditors/AppGeoEditor.py:5049
msgid "Exterior buffer geometry created."
msgstr ""

#: appEditors/AppGeoEditor.py:5055
#, python-format
msgid "Could not do Paint. Overlap value has to be less than 100%%."
msgstr ""

#: appEditors/AppGeoEditor.py:5062
msgid "Nothing selected for painting."
msgstr ""

#: appEditors/AppGeoEditor.py:5068
msgid "Invalid value for"
msgstr ""

#: appEditors/AppGeoEditor.py:5127
msgid ""
"Could not do Paint. Try a different combination of parameters. Or a different method of "
"Paint"
msgstr ""

#: appEditors/AppGeoEditor.py:5138
msgid "Paint done."
msgstr ""

#: appEditors/AppGerberEditor.py:211
msgid "To add an Pad first select a aperture in Aperture Table"
msgstr ""

#: appEditors/AppGerberEditor.py:218 appEditors/AppGerberEditor.py:418
msgid "Aperture size is zero. It needs to be greater than zero."
msgstr ""

#: appEditors/AppGerberEditor.py:371 appEditors/AppGerberEditor.py:684
msgid "Incompatible aperture type. Select an aperture with type 'C', 'R' or 'O'."
msgstr ""

#: appEditors/AppGerberEditor.py:383
msgid "Done. Adding Pad completed."
msgstr ""

#: appEditors/AppGerberEditor.py:410
msgid "To add an Pad Array first select a aperture in Aperture Table"
msgstr ""

#: appEditors/AppGerberEditor.py:490
msgid "Click on the Pad Circular Array Start position"
msgstr ""

#: appEditors/AppGerberEditor.py:710
msgid "Too many Pads for the selected spacing angle."
msgstr ""

#: appEditors/AppGerberEditor.py:733
msgid "Done. Pad Array added."
msgstr ""

#: appEditors/AppGerberEditor.py:758
msgid "Select shape(s) and then click ..."
msgstr ""

#: appEditors/AppGerberEditor.py:770
msgid "Failed. Nothing selected."
msgstr ""

#: appEditors/AppGerberEditor.py:786
msgid "Failed. Poligonize works only on geometries belonging to the same aperture."
msgstr ""

#: appEditors/AppGerberEditor.py:840
msgid "Done. Poligonize completed."
msgstr ""

#: appEditors/AppGerberEditor.py:895 appEditors/AppGerberEditor.py:1119
#: appEditors/AppGerberEditor.py:1143
msgid "Corner Mode 1: 45 degrees ..."
msgstr ""

#: appEditors/AppGerberEditor.py:907 appEditors/AppGerberEditor.py:1219
msgid "Click on next Point or click Right mouse button to complete ..."
msgstr ""

#: appEditors/AppGerberEditor.py:1107 appEditors/AppGerberEditor.py:1140
msgid "Corner Mode 2: Reverse 45 degrees ..."
msgstr ""

#: appEditors/AppGerberEditor.py:1110 appEditors/AppGerberEditor.py:1137
msgid "Corner Mode 3: 90 degrees ..."
msgstr ""

#: appEditors/AppGerberEditor.py:1113 appEditors/AppGerberEditor.py:1134
msgid "Corner Mode 4: Reverse 90 degrees ..."
msgstr ""

#: appEditors/AppGerberEditor.py:1116 appEditors/AppGerberEditor.py:1131
msgid "Corner Mode 5: Free angle ..."
msgstr ""

#: appEditors/AppGerberEditor.py:1193 appEditors/AppGerberEditor.py:1358
#: appEditors/AppGerberEditor.py:1397
msgid "Track Mode 1: 45 degrees ..."
msgstr ""

#: appEditors/AppGerberEditor.py:1338 appEditors/AppGerberEditor.py:1392
msgid "Track Mode 2: Reverse 45 degrees ..."
msgstr ""

#: appEditors/AppGerberEditor.py:1343 appEditors/AppGerberEditor.py:1387
msgid "Track Mode 3: 90 degrees ..."
msgstr ""

#: appEditors/AppGerberEditor.py:1348 appEditors/AppGerberEditor.py:1382
msgid "Track Mode 4: Reverse 90 degrees ..."
msgstr ""

#: appEditors/AppGerberEditor.py:1353 appEditors/AppGerberEditor.py:1377
msgid "Track Mode 5: Free angle ..."
msgstr ""

#: appEditors/AppGerberEditor.py:1787
msgid "Scale the selected Gerber apertures ..."
msgstr ""

#: appEditors/AppGerberEditor.py:1829
msgid "Buffer the selected apertures ..."
msgstr ""

#: appEditors/AppGerberEditor.py:1871
msgid "Mark polygon areas in the edited Gerber ..."
msgstr ""

#: appEditors/AppGerberEditor.py:1937
msgid "Nothing selected to move"
msgstr ""

#: appEditors/AppGerberEditor.py:2062
msgid "Done. Apertures Move completed."
msgstr ""

#: appEditors/AppGerberEditor.py:2144
msgid "Done. Apertures copied."
msgstr ""

#: appEditors/AppGerberEditor.py:2462 appGUI/MainGUI.py:1527 appGUI/ObjectUI.py:309
#: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:27
msgid "Gerber Editor"
msgstr ""

#: appEditors/AppGerberEditor.py:2482 appGUI/ObjectUI.py:241 appTools/ToolProperties.py:162
msgid "Apertures"
msgstr ""

#: appEditors/AppGerberEditor.py:2484 appGUI/ObjectUI.py:243
msgid "Apertures Table for the Gerber Object."
msgstr ""

#: appEditors/AppGerberEditor.py:2495 appEditors/AppGerberEditor.py:3968
#: appGUI/ObjectUI.py:276
msgid "Code"
msgstr ""

#: appEditors/AppGerberEditor.py:2495 appEditors/AppGerberEditor.py:3968
#: appGUI/ObjectUI.py:276 appGUI/preferences/general/GeneralAPPSetGroupUI.py:103
#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:167
#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:196
#: appGUI/preferences/tools/Tools2FiducialsPrefGroupUI.py:43
#: appTools/ToolCopperThieving.py:1354 appTools/ToolCopperThieving.py:1394
#: appTools/ToolFiducials.py:770
msgid "Size"
msgstr ""

#: appEditors/AppGerberEditor.py:2495 appEditors/AppGerberEditor.py:3968
#: appGUI/ObjectUI.py:276
msgid "Dim"
msgstr ""

#: appEditors/AppGerberEditor.py:2500 appGUI/ObjectUI.py:280
msgid "Index"
msgstr ""

#: appEditors/AppGerberEditor.py:2502 appEditors/AppGerberEditor.py:2531
#: appGUI/ObjectUI.py:282
msgid "Aperture Code"
msgstr ""

#: appEditors/AppGerberEditor.py:2504 appGUI/ObjectUI.py:284
msgid "Type of aperture: circular, rectangle, macros etc"
msgstr ""

#: appEditors/AppGerberEditor.py:2506 appGUI/ObjectUI.py:286
msgid "Aperture Size:"
msgstr ""

#: appEditors/AppGerberEditor.py:2508 appGUI/ObjectUI.py:288
msgid ""
"Aperture Dimensions:\n"
" - (width, height) for R, O type.\n"
" - (dia, nVertices) for P type"
msgstr ""

#: appEditors/AppGerberEditor.py:2532
#: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:58
msgid "Code for the new aperture"
msgstr ""

#: appEditors/AppGerberEditor.py:2541
msgid "Aperture Size"
msgstr ""

#: appEditors/AppGerberEditor.py:2543
msgid ""
"Size for the new aperture.\n"
"If aperture type is 'R' or 'O' then\n"
"this value is automatically\n"
"calculated as:\n"
"sqrt(width**2 + height**2)"
msgstr ""

#: appEditors/AppGerberEditor.py:2557
msgid "Aperture Type"
msgstr ""

#: appEditors/AppGerberEditor.py:2559
msgid ""
"Select the type of new aperture. Can be:\n"
"C = circular\n"
"R = rectangular\n"
"O = oblong"
msgstr ""

#: appEditors/AppGerberEditor.py:2570
msgid "Aperture Dim"
msgstr ""

#: appEditors/AppGerberEditor.py:2572
msgid ""
"Dimensions for the new aperture.\n"
"Active only for rectangular apertures (type R).\n"
"The format is (width, height)"
msgstr ""

#: appEditors/AppGerberEditor.py:2581
msgid "Add/Delete Aperture"
msgstr ""

#: appEditors/AppGerberEditor.py:2583
msgid "Add/Delete an aperture in the aperture table"
msgstr ""

#: appEditors/AppGerberEditor.py:2592
msgid "Add a new aperture to the aperture list."
msgstr ""

#: appEditors/AppGerberEditor.py:2595 appEditors/AppGerberEditor.py:2743
#: appGUI/MainGUI.py:757 appGUI/MainGUI.py:1093 appGUI/MainGUI.py:1577
#: appGUI/MainGUI.py:2247 appGUI/MainGUI.py:4683 appGUI/ObjectUI.py:1007
#: appObjects/FlatCAMGeometry.py:555 appTools/ToolIsolation.py:70
#: appTools/ToolIsolation.py:3105 appTools/ToolNCC.py:69 appTools/ToolNCC.py:3910
#: appTools/ToolPaint.py:143 appTools/ToolPaint.py:2924 appTools/ToolSolderPaste.py:163
#: appTools/ToolSolderPaste.py:1209 app_Main.py:6123
msgid "Delete"
msgstr ""

#: appEditors/AppGerberEditor.py:2597
msgid "Delete a aperture in the aperture list"
msgstr ""

#: appEditors/AppGerberEditor.py:2614
msgid "Buffer Aperture"
msgstr ""

#: appEditors/AppGerberEditor.py:2616
msgid "Buffer a aperture in the aperture list"
msgstr ""

#: appEditors/AppGerberEditor.py:2629
#: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:195
msgid "Buffer distance"
msgstr ""

#: appEditors/AppGerberEditor.py:2630
msgid "Buffer corner"
msgstr ""

#: appEditors/AppGerberEditor.py:2632
msgid ""
"There are 3 types of corners:\n"
" - 'Round': the corner is rounded.\n"
" - 'Square': the corner is met in a sharp angle.\n"
" - 'Beveled': the corner is a line that directly connects the features meeting in the "
"corner"
msgstr ""

#: appEditors/AppGerberEditor.py:2662
msgid "Scale Aperture"
msgstr ""

#: appEditors/AppGerberEditor.py:2664
msgid "Scale a aperture in the aperture list"
msgstr ""

#: appEditors/AppGerberEditor.py:2672
#: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:210
msgid "Scale factor"
msgstr ""

#: appEditors/AppGerberEditor.py:2674
msgid ""
"The factor by which to scale the selected aperture.\n"
"Values can be between 0.0000 and 999.9999"
msgstr ""

#: appEditors/AppGerberEditor.py:2702
msgid "Mark polygons"
msgstr ""

#: appEditors/AppGerberEditor.py:2704
msgid "Mark the polygon areas."
msgstr ""

#: appEditors/AppGerberEditor.py:2712
msgid "Area UPPER threshold"
msgstr ""

#: appEditors/AppGerberEditor.py:2714
msgid ""
"The threshold value, all areas less than this are marked.\n"
"Can have a value between 0.0000 and 9999.9999"
msgstr ""

#: appEditors/AppGerberEditor.py:2721
msgid "Area LOWER threshold"
msgstr ""

#: appEditors/AppGerberEditor.py:2723
msgid ""
"The threshold value, all areas more than this are marked.\n"
"Can have a value between 0.0000 and 9999.9999"
msgstr ""

#: appEditors/AppGerberEditor.py:2737
msgid "Mark"
msgstr ""

#: appEditors/AppGerberEditor.py:2739
msgid "Mark the polygons that fit within limits."
msgstr ""

#: appEditors/AppGerberEditor.py:2745
msgid "Delete all the marked polygons."
msgstr ""

#: appEditors/AppGerberEditor.py:2751
msgid "Clear all the markings."
msgstr ""

#: appEditors/AppGerberEditor.py:2771 appGUI/MainGUI.py:1065 appGUI/MainGUI.py:2220
#: appGUI/MainGUI.py:4680
msgid "Add Pad Array"
msgstr ""

#: appEditors/AppGerberEditor.py:2773
msgid "Add an array of pads (linear or circular array)"
msgstr ""

#: appEditors/AppGerberEditor.py:2779
msgid ""
"Select the type of pads array to create.\n"
"It can be Linear X(Y) or Circular"
msgstr ""

#: appEditors/AppGerberEditor.py:2790
#: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:95
msgid "Nr of pads"
msgstr ""

#: appEditors/AppGerberEditor.py:2792
#: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:97
msgid "Specify how many pads to be in the array."
msgstr ""

#: appEditors/AppGerberEditor.py:2841
msgid ""
"Angle at which the linear array is placed.\n"
"The precision is of max 2 decimals.\n"
"Min value is: -359.99 degrees.\n"
"Max value is:  360.00 degrees."
msgstr ""

#: appEditors/AppGerberEditor.py:3352 appEditors/AppGerberEditor.py:3356
msgid "Aperture code value is missing or wrong format. Add it and retry."
msgstr ""

#: appEditors/AppGerberEditor.py:3392
msgid ""
"Aperture dimensions value is missing or wrong format. Add it in format (width, height) "
"and retry."
msgstr ""

#: appEditors/AppGerberEditor.py:3405
msgid "Aperture size value is missing or wrong format. Add it and retry."
msgstr ""

#: appEditors/AppGerberEditor.py:3416
msgid "Aperture already in the aperture table."
msgstr ""

#: appEditors/AppGerberEditor.py:3423
msgid "Added new aperture with code"
msgstr ""

#: appEditors/AppGerberEditor.py:3455
msgid " Select an aperture in Aperture Table"
msgstr ""

#: appEditors/AppGerberEditor.py:3463
msgid "Select an aperture in Aperture Table -->"
msgstr ""

#: appEditors/AppGerberEditor.py:3477
msgid "Deleted aperture with code"
msgstr ""

#: appEditors/AppGerberEditor.py:3545
msgid "Dimensions need two float values separated by comma."
msgstr ""

#: appEditors/AppGerberEditor.py:3554
msgid "Dimensions edited."
msgstr ""

#: appEditors/AppGerberEditor.py:4083
msgid "Loading Gerber into Editor"
msgstr ""

#: appEditors/AppGerberEditor.py:4211
msgid "Setting up the UI"
msgstr ""

#: appEditors/AppGerberEditor.py:4212
msgid "Adding geometry finished. Preparing the GUI"
msgstr ""

#: appEditors/AppGerberEditor.py:4221
msgid "Finished loading the Gerber object into the editor."
msgstr ""

#: appEditors/AppGerberEditor.py:4362
msgid "There are no Aperture definitions in the file. Aborting Gerber creation."
msgstr ""

#: appEditors/AppGerberEditor.py:4364 appObjects/AppObject.py:156
#: appObjects/FlatCAMGeometry.py:1850 appParsers/ParseExcellon.py:972
#: appTools/ToolPcbWizard.py:318 app_Main.py:8990 app_Main.py:9050 app_Main.py:9181
#: app_Main.py:9246 app_Main.py:9898
msgid "An internal error has occurred. See shell.\n"
msgstr ""

#: appEditors/AppGerberEditor.py:4372
msgid "Creating Gerber."
msgstr ""

#: appEditors/AppGerberEditor.py:4384
msgid "Done. Gerber editing finished."
msgstr ""

#: appEditors/AppGerberEditor.py:4400
msgid "Cancelled. No aperture is selected"
msgstr ""

#: appEditors/AppGerberEditor.py:4555 app_Main.py:6456
msgid "Coordinates copied to clipboard."
msgstr ""

#: appEditors/AppGerberEditor.py:5002
msgid "Failed. No aperture geometry is selected."
msgstr ""

#: appEditors/AppGerberEditor.py:5011 appEditors/AppGerberEditor.py:5282
msgid "Done. Apertures geometry deleted."
msgstr ""

#: appEditors/AppGerberEditor.py:5154
msgid "No aperture to buffer. Select at least one aperture and try again."
msgstr ""

#: appEditors/AppGerberEditor.py:5166 appTools/ToolCutOut.py:756 appTools/ToolCutOut.py:830
#: appTools/ToolCutOut.py:1049 appTools/ToolCutOut.py:1088 camlib.py:4826 camlib.py:5582
msgid "Failed."
msgstr ""

#: appEditors/AppGerberEditor.py:5185
msgid "Scale factor value is missing or wrong format. Add it and retry."
msgstr ""

#: appEditors/AppGerberEditor.py:5217
msgid "No aperture to scale. Select at least one aperture and try again."
msgstr ""

#: appEditors/AppGerberEditor.py:5233
msgid "Done. Scale Tool completed."
msgstr ""

#: appEditors/AppGerberEditor.py:5271
msgid "Polygons marked."
msgstr ""

#: appEditors/AppGerberEditor.py:5274
msgid "No polygons were marked. None fit within the limits."
msgstr ""

#: appEditors/AppGerberEditor.py:6002
msgid "Rotation action was not executed."
msgstr ""

#: appEditors/AppGerberEditor.py:6044 app_Main.py:5879 app_Main.py:5927
msgid "Flip action was not executed."
msgstr ""

#: appEditors/AppGerberEditor.py:6084
msgid "Skew action was not executed."
msgstr ""

#: appEditors/AppGerberEditor.py:6123
msgid "Scale action was not executed."
msgstr ""

#: appEditors/AppGerberEditor.py:6167
msgid "Offset action was not executed."
msgstr ""

#: appEditors/AppGerberEditor.py:6253
msgid "Geometry shape offset Y cancelled"
msgstr ""

#: appEditors/AppGerberEditor.py:6268
msgid "Geometry shape skew X cancelled"
msgstr ""

#: appEditors/AppGerberEditor.py:6283
msgid "Geometry shape skew Y cancelled"
msgstr ""

#: appEditors/AppTextEditor.py:75
msgid "Print Preview"
msgstr ""

#: appEditors/AppTextEditor.py:77
msgid "Open a OS standard Preview Print window."
msgstr ""

#: appEditors/AppTextEditor.py:80
msgid "Print Code"
msgstr ""

#: appEditors/AppTextEditor.py:82
msgid "Open a OS standard Print window."
msgstr ""

#: appEditors/AppTextEditor.py:85
msgid "Find in Code"
msgstr ""

#: appEditors/AppTextEditor.py:87
msgid "Will search and highlight in yellow the string in the Find box."
msgstr ""

#: appEditors/AppTextEditor.py:91
msgid "Find box. Enter here the strings to be searched in the text."
msgstr ""

#: appEditors/AppTextEditor.py:93
msgid "Replace With"
msgstr ""

#: appEditors/AppTextEditor.py:95
msgid "Will replace the string from the Find box with the one in the Replace box."
msgstr ""

#: appEditors/AppTextEditor.py:99
msgid "String to replace the one in the Find box throughout the text."
msgstr ""

#: appEditors/AppTextEditor.py:101 appGUI/GUIElements.py:3498 appGUI/ObjectUI.py:1726
#: appGUI/preferences/cncjob/CNCJobOptPrefGroupUI.py:61
#: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:285
#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:280 appTools/ToolIsolation.py:802
#: appTools/ToolIsolation.py:1395 appTools/ToolIsolation.py:3323 appTools/ToolPaint.py:1034
#: appTools/ToolPaint.py:3125 defaults.py:413 defaults.py:500
#: tclCommands/TclCommandPaint.py:162
msgid "All"
msgstr ""

#: appEditors/AppTextEditor.py:102
msgid ""
"When checked it will replace all instances in the 'Find' box\n"
"with the text in the 'Replace' box.."
msgstr ""

#: appEditors/AppTextEditor.py:105
msgid "Copy All"
msgstr ""

#: appEditors/AppTextEditor.py:107
msgid "Will copy all the text in the Code Editor to the clipboard."
msgstr ""

#: appEditors/AppTextEditor.py:112
msgid "Save changes internally."
msgstr ""

#: appEditors/AppTextEditor.py:115
msgid "Open Code"
msgstr ""

#: appEditors/AppTextEditor.py:117
msgid "Will open a text file in the editor."
msgstr ""

#: appEditors/AppTextEditor.py:120
msgid "Save Code"
msgstr ""

#: appEditors/AppTextEditor.py:122
msgid "Will save the text in the editor into a file."
msgstr ""

#: appEditors/AppTextEditor.py:125
msgid "Run Code"
msgstr ""

#: appEditors/AppTextEditor.py:126
msgid "Will run the TCL commands found in the text file, one by one."
msgstr ""

#: appEditors/AppTextEditor.py:224 appEditors/appGCodeEditor.py:602
msgid "Open file"
msgstr ""

#: appEditors/AppTextEditor.py:255 appEditors/AppTextEditor.py:260
#: appObjects/FlatCAMCNCJob.py:1485 appObjects/FlatCAMCNCJob.py:1490
#: appObjects/FlatCAMCNCJob.py:1713 appObjects/FlatCAMCNCJob.py:1718
#: appTools/ToolSolderPaste.py:1063 app_Main.py:7021 app_Main.py:7026
msgid "Export Code ..."
msgstr ""

#: appEditors/AppTextEditor.py:314 appObjects/FlatCAMCNCJob.py:1507
#: appObjects/FlatCAMCNCJob.py:2106 appTools/ToolSolderPaste.py:1093
msgid "No such file or directory"
msgstr ""

#: appEditors/AppTextEditor.py:326 appObjects/FlatCAMCNCJob.py:2120
msgid "Saved to"
msgstr ""

#: appEditors/AppTextEditor.py:374
msgid "Content copied to clipboard ..."
msgstr ""

#: appEditors/appGCodeEditor.py:66 app_Main.py:7882
msgid "Code Editor"
msgstr ""

#: appEditors/appGCodeEditor.py:143 appEditors/appGCodeEditor.py:235
msgid "All GCode"
msgstr ""

#: appEditors/appGCodeEditor.py:149 appEditors/appGCodeEditor.py:241
msgid "Header GCode"
msgstr ""

#: appEditors/appGCodeEditor.py:155 appEditors/appGCodeEditor.py:247
msgid "Start GCode"
msgstr ""

#: appEditors/appGCodeEditor.py:577 appObjects/FlatCAMCNCJob.py:1811
#: appTools/ToolCalibration.py:447
msgid "Loaded Machine Code into Code Editor"
msgstr ""

#: appEditors/appGCodeEditor.py:667 appGUI/ObjectUI.py:1858
msgid "GCode Editor"
msgstr ""

#: appEditors/appGCodeEditor.py:692 appEditors/appGCodeEditor.py:703 appGUI/ObjectUI.py:858
#: appGUI/ObjectUI.py:1830 appGUI/ObjectUI.py:1840
#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:138
#: appTools/ToolCopperThieving.py:1314
msgid "Dia"
msgstr ""

#: appEditors/appGCodeEditor.py:692 appGUI/ObjectUI.py:858 appGUI/ObjectUI.py:1830
#: appTools/ToolIsolation.py:2984 appTools/ToolNCC.py:3777 appTools/ToolPaint.py:2812
msgid "TT"
msgstr ""

#: appEditors/appGCodeEditor.py:703 appGUI/ObjectUI.py:571 appGUI/ObjectUI.py:1840
#: appGUI/preferences/excellon/ExcellonOptPrefGroupUI.py:71 appTools/ToolDrilling.py:2051
#: appTools/ToolMilling.py:1670 appTools/ToolMilling.py:1769 appTools/ToolProperties.py:169
msgid "Drills"
msgstr ""

#: appEditors/appGCodeEditor.py:703 appGUI/ObjectUI.py:571 appGUI/ObjectUI.py:1840
#: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:158
#: appGUI/preferences/excellon/ExcellonOptPrefGroupUI.py:72 appTools/ToolDrilling.py:2051
#: appTools/ToolMilling.py:1670 appTools/ToolMilling.py:1770 appTools/ToolProperties.py:171
msgid "Slots"
msgstr ""

#: appEditors/appGCodeEditor.py:712 appEditors/appGCodeEditor.py:734
msgid "CNC Code Snippet"
msgstr ""

#: appEditors/appGCodeEditor.py:714 appEditors/appGCodeEditor.py:736
msgid "Code snippet defined in Preferences."
msgstr ""

#: appEditors/appGCodeEditor.py:720 appEditors/appGCodeEditor.py:742
msgid ""
"Type here any G-Code commands you would\n"
"like to insert at the cursor location."
msgstr ""

#: appEditors/appGCodeEditor.py:726 appEditors/appGCodeEditor.py:748
msgid "Insert Code"
msgstr ""

#: appEditors/appGCodeEditor.py:729 appEditors/appGCodeEditor.py:751
msgid "Insert the code above at the cursor location."
msgstr ""

#: appGUI/GUIElements.py:2949
msgid ""
"The reference can be:\n"
"- Absolute -> the reference point is point (0,0)\n"
"- Relative -> the reference point is the mouse position before Jump"
msgstr ""

#: appGUI/GUIElements.py:2954
msgid "Abs"
msgstr ""

#: appGUI/GUIElements.py:2955
msgid "Relative"
msgstr ""

#: appGUI/GUIElements.py:2965
msgid "Location"
msgstr ""

#: appGUI/GUIElements.py:2967
msgid ""
"The Location value is a tuple (x,y).\n"
"If the reference is Absolute then the Jump will be at the position (x,y).\n"
"If the reference is Relative then the Jump will be at the (x,y) distance\n"
"from the current mouse location point."
msgstr ""

#: appGUI/GUIElements.py:3007
msgid "Save Log"
msgstr ""

#: appGUI/GUIElements.py:3017 app_Main.py:2803 app_Main.py:3175 app_Main.py:3348
msgid "Close"
msgstr ""

#: appGUI/GUIElements.py:3026 appTools/ToolShell.py:296
msgid "Type >help< to get started"
msgstr ""

#: appGUI/GUIElements.py:3393 appGUI/GUIElements.py:3410
msgid "Jog the Y axis."
msgstr ""

#: appGUI/GUIElements.py:3401
msgid "Move to Origin."
msgstr ""

#: appGUI/GUIElements.py:3418 appGUI/GUIElements.py:3426
msgid "Jog the X axis."
msgstr ""

#: appGUI/GUIElements.py:3436 appGUI/GUIElements.py:3446
msgid "Jog the Z axis."
msgstr ""

#: appGUI/GUIElements.py:3472
msgid "Zero the CNC X axes at current position."
msgstr ""

#: appGUI/GUIElements.py:3480
msgid "Zero the CNC Y axes at current position."
msgstr ""

#: appGUI/GUIElements.py:3485
msgid "Z"
msgstr ""

#: appGUI/GUIElements.py:3488
msgid "Zero the CNC Z axes at current position."
msgstr ""

#: appGUI/GUIElements.py:3492
msgid "Do Home"
msgstr ""

#: appGUI/GUIElements.py:3494
msgid "Perform a homing cycle on all axis."
msgstr ""

#: appGUI/GUIElements.py:3502
msgid "Zero all CNC axes at current position."
msgstr ""

#: appGUI/GUIElements.py:3657 appGUI/GUIElements.py:3666
msgid "Idle."
msgstr ""

#: appGUI/GUIElements.py:3699
msgid "Application started ..."
msgstr ""

#: appGUI/GUIElements.py:3700
msgid "Hello!"
msgstr ""

#: appGUI/GUIElements.py:3747 appGUI/MainGUI.py:190 appGUI/MainGUI.py:918
#: appGUI/MainGUI.py:2073
msgid "Run Script ..."
msgstr ""

#: appGUI/GUIElements.py:3749 appGUI/MainGUI.py:192
msgid ""
"Will run the opened Tcl Script thus\n"
"enabling the automation of certain\n"
"functions of FlatCAM."
msgstr ""

#: appGUI/GUIElements.py:3758 appGUI/MainGUI.py:118 appTools/ToolPcbWizard.py:390
#: appTools/ToolPcbWizard.py:397
msgid "Open"
msgstr ""

#: appGUI/GUIElements.py:3762
msgid "Open Project ..."
msgstr ""

#: appGUI/GUIElements.py:3768 appGUI/MainGUI.py:129
msgid "Open &Gerber ...\tCtrl+G"
msgstr ""

#: appGUI/GUIElements.py:3773 appGUI/MainGUI.py:134
msgid "Open &Excellon ...\tCtrl+E"
msgstr ""

#: appGUI/GUIElements.py:3778 appGUI/MainGUI.py:139
msgid "Open G-&Code ..."
msgstr ""

#: appGUI/GUIElements.py:3788
msgid "Exit"
msgstr ""

#: appGUI/MainGUI.py:67 appGUI/MainGUI.py:69 appGUI/MainGUI.py:1457
msgid "Toggle Panel"
msgstr ""

#: appGUI/MainGUI.py:79
msgid "File"
msgstr ""

#: appGUI/MainGUI.py:84
msgid "&New Project ...\tCtrl+N"
msgstr ""

#: appGUI/MainGUI.py:86
msgid "Will create a new, blank project"
msgstr ""

#: appGUI/MainGUI.py:91
msgid "&New"
msgstr ""

#: appGUI/MainGUI.py:95
msgid "Geometry\tN"
msgstr ""

#: appGUI/MainGUI.py:97
msgid "Will create a new, empty Geometry Object."
msgstr ""

#: appGUI/MainGUI.py:100
msgid "Gerber\tB"
msgstr ""

#: appGUI/MainGUI.py:102
msgid "Will create a new, empty Gerber Object."
msgstr ""

#: appGUI/MainGUI.py:105
msgid "Excellon\tL"
msgstr ""

#: appGUI/MainGUI.py:107
msgid "Will create a new, empty Excellon Object."
msgstr ""

#: appGUI/MainGUI.py:112
msgid "Document\tD"
msgstr ""

#: appGUI/MainGUI.py:114
msgid "Will create a new, empty Document Object."
msgstr ""

#: appGUI/MainGUI.py:123
msgid "Open &Project ..."
msgstr ""

#: appGUI/MainGUI.py:146
msgid "Open Config ..."
msgstr ""

#: appGUI/MainGUI.py:151
msgid "Recent projects"
msgstr ""

#: appGUI/MainGUI.py:153
msgid "Recent files"
msgstr ""

#: appGUI/MainGUI.py:156 appGUI/MainGUI.py:759 appGUI/MainGUI.py:1430
msgid "Save"
msgstr ""

#: appGUI/MainGUI.py:160
msgid "&Save Project ...\tCtrl+S"
msgstr ""

#: appGUI/MainGUI.py:165
msgid "Save Project &As ...\tCtrl+Shift+S"
msgstr ""

#: appGUI/MainGUI.py:180
msgid "Scripting"
msgstr ""

#: appGUI/MainGUI.py:184 appGUI/MainGUI.py:914 appGUI/MainGUI.py:2069
msgid "New Script ..."
msgstr ""

#: appGUI/MainGUI.py:186 appGUI/MainGUI.py:916 appGUI/MainGUI.py:2071
msgid "Open Script ..."
msgstr ""

#: appGUI/MainGUI.py:188
msgid "Open Example ..."
msgstr ""

#: appGUI/MainGUI.py:207
msgid "Import"
msgstr ""

#: appGUI/MainGUI.py:209
msgid "&SVG as Geometry Object ..."
msgstr ""

#: appGUI/MainGUI.py:212
msgid "&SVG as Gerber Object ..."
msgstr ""

#: appGUI/MainGUI.py:217
msgid "&DXF as Geometry Object ..."
msgstr ""

#: appGUI/MainGUI.py:220
msgid "&DXF as Gerber Object ..."
msgstr ""

#: appGUI/MainGUI.py:224
msgid "HPGL2 as Geometry Object ..."
msgstr ""

#: appGUI/MainGUI.py:230
msgid "Export"
msgstr ""

#: appGUI/MainGUI.py:234
msgid "Export &SVG ..."
msgstr ""

#: appGUI/MainGUI.py:238
msgid "Export DXF ..."
msgstr ""

#: appGUI/MainGUI.py:244
msgid "Export &PNG ..."
msgstr ""

#: appGUI/MainGUI.py:246
msgid ""
"Will export an image in PNG format,\n"
"the saved image will contain the visual \n"
"information currently in FlatCAM Plot Area."
msgstr ""

#: appGUI/MainGUI.py:255
msgid "Export &Excellon ..."
msgstr ""

#: appGUI/MainGUI.py:257
msgid ""
"Will export an Excellon Object as Excellon file,\n"
"the coordinates format, the file units and zeros\n"
"are set in Preferences -> Excellon Export."
msgstr ""

#: appGUI/MainGUI.py:264
msgid "Export &Gerber ..."
msgstr ""

#: appGUI/MainGUI.py:266
msgid ""
"Will export an Gerber Object as Gerber file,\n"
"the coordinates format, the file units and zeros\n"
"are set in Preferences -> Gerber Export."
msgstr ""

#: appGUI/MainGUI.py:276
msgid "Backup"
msgstr ""

#: appGUI/MainGUI.py:281
msgid "Import Preferences from file ..."
msgstr ""

#: appGUI/MainGUI.py:287
msgid "Export Preferences to file ..."
msgstr ""

#: appGUI/MainGUI.py:295 appGUI/preferences/PreferencesUIManager.py:1163
msgid "Save Preferences"
msgstr ""

#: appGUI/MainGUI.py:301 appGUI/MainGUI.py:4270
msgid "Print (PDF)"
msgstr ""

#: appGUI/MainGUI.py:309
msgid "E&xit"
msgstr ""

#: appGUI/MainGUI.py:317 appGUI/MainGUI.py:753 appGUI/MainGUI.py:1579
msgid "Edit"
msgstr ""

#: appGUI/MainGUI.py:321
msgid "Edit Object\tE"
msgstr ""

#: appGUI/MainGUI.py:323
msgid "Close Editor\tCtrl+S"
msgstr ""

#: appGUI/MainGUI.py:333
msgid "Conversion"
msgstr ""

#: appGUI/MainGUI.py:336
msgid "Convert Single to MultiGeo"
msgstr ""

#: appGUI/MainGUI.py:338
msgid ""
"Will convert a Geometry object from single_geometry type\n"
"to a multi_geometry type."
msgstr ""

#: appGUI/MainGUI.py:342
msgid "Convert Multi to SingleGeo"
msgstr ""

#: appGUI/MainGUI.py:344
msgid ""
"Will convert a Geometry object from multi_geometry type\n"
"to a single_geometry type."
msgstr ""

#: appGUI/MainGUI.py:351
msgid "Convert Any to Geo"
msgstr ""

#: appGUI/MainGUI.py:354
msgid "Convert Any to Gerber"
msgstr ""

#: appGUI/MainGUI.py:357
msgid "Convert Any to Excellon"
msgstr ""

#: appGUI/MainGUI.py:362
msgid "Join Objects"
msgstr ""

#: appGUI/MainGUI.py:364
msgid "&Join Geo/Gerber/Exc -> Geo"
msgstr ""

#: appGUI/MainGUI.py:366
msgid ""
"Merge a selection of objects, which can be of type:\n"
"- Gerber\n"
"- Excellon\n"
"- Geometry\n"
"into a new combo Geometry object."
msgstr ""

#: appGUI/MainGUI.py:373
msgid "Join Excellon(s) -> Excellon"
msgstr ""

#: appGUI/MainGUI.py:375
msgid "Merge a selection of Excellon objects into a new combo Excellon object."
msgstr ""

#: appGUI/MainGUI.py:378
msgid "Join Gerber(s) -> Gerber"
msgstr ""

#: appGUI/MainGUI.py:380
msgid "Merge a selection of Gerber objects into a new combo Gerber object."
msgstr ""

#: appGUI/MainGUI.py:388
msgid "&Copy\tCtrl+C"
msgstr ""

#: appGUI/MainGUI.py:393
msgid "&Delete\tDEL"
msgstr ""

#: appGUI/MainGUI.py:398
msgid "Se&t Origin\tO"
msgstr ""

#: appGUI/MainGUI.py:400
msgid "Move to Origin\tShift+O"
msgstr ""

#: appGUI/MainGUI.py:403
msgid "Jump to Location\tJ"
msgstr ""

#: appGUI/MainGUI.py:405
msgid "Locate in Object\tShift+J"
msgstr ""

#: appGUI/MainGUI.py:410
msgid "Toggle Units\tQ"
msgstr ""

#: appGUI/MainGUI.py:412
msgid "&Select All\tCtrl+A"
msgstr ""

#: appGUI/MainGUI.py:417
msgid "&Preferences\tShift+P"
msgstr ""

#: appGUI/MainGUI.py:423 appTools/ToolProperties.py:158
msgid "Options"
msgstr ""

#: appGUI/MainGUI.py:425
msgid "&Rotate Selection\tShift+(R)"
msgstr ""

#: appGUI/MainGUI.py:430
msgid "&Skew on X axis\tShift+X"
msgstr ""

#: appGUI/MainGUI.py:432
msgid "S&kew on Y axis\tShift+Y"
msgstr ""

#: appGUI/MainGUI.py:437
msgid "Flip on &X axis\tX"
msgstr ""

#: appGUI/MainGUI.py:439
msgid "Flip on &Y axis\tY"
msgstr ""

#: appGUI/MainGUI.py:444
msgid "View source\tAlt+S"
msgstr ""

#: appGUI/MainGUI.py:446
msgid "Tools DataBase\tCtrl+D"
msgstr ""

#: appGUI/MainGUI.py:453 appGUI/MainGUI.py:1477
msgid "View"
msgstr ""

#: appGUI/MainGUI.py:455
msgid "Enable all plots\tAlt+1"
msgstr ""

#: appGUI/MainGUI.py:457
msgid "Disable all plots\tAlt+2"
msgstr ""

#: appGUI/MainGUI.py:459
msgid "Disable non-selected\tAlt+3"
msgstr ""

#: appGUI/MainGUI.py:463
msgid "&Zoom Fit\tV"
msgstr ""

#: appGUI/MainGUI.py:465
msgid "&Zoom In\t="
msgstr ""

#: appGUI/MainGUI.py:467
msgid "&Zoom Out\t-"
msgstr ""

#: appGUI/MainGUI.py:472
msgid "Redraw All\tF5"
msgstr ""

#: appGUI/MainGUI.py:476
msgid "Toggle Code Editor\tShift+E"
msgstr ""

#: appGUI/MainGUI.py:479
msgid "&Toggle FullScreen\tAlt+F10"
msgstr ""

#: appGUI/MainGUI.py:481
msgid "&Toggle Plot Area\tCtrl+F10"
msgstr ""

#: appGUI/MainGUI.py:483
msgid "&Toggle Project/Sel/Tool\t`"
msgstr ""

#: appGUI/MainGUI.py:487
msgid "&Toggle Grid Snap\tG"
msgstr ""

#: appGUI/MainGUI.py:489
msgid "&Toggle Grid Lines\tAlt+G"
msgstr ""

#: appGUI/MainGUI.py:491
msgid "&Toggle Axis\tShift+G"
msgstr ""

#: appGUI/MainGUI.py:493
msgid "Toggle Workspace\tShift+W"
msgstr ""

#: appGUI/MainGUI.py:495
msgid "Toggle HUD\tAlt+H"
msgstr ""

#: appGUI/MainGUI.py:500
msgid "Objects"
msgstr ""

#: appGUI/MainGUI.py:503 appGUI/MainGUI.py:4268 appObjects/ObjectCollection.py:1128
#: appObjects/ObjectCollection.py:1175
msgid "Select All"
msgstr ""

#: appGUI/MainGUI.py:505 appObjects/ObjectCollection.py:1132
#: appObjects/ObjectCollection.py:1179
msgid "Deselect All"
msgstr ""

#: appGUI/MainGUI.py:514
msgid "&Command Line\tS"
msgstr ""

#: appGUI/MainGUI.py:519
msgid "Help"
msgstr ""

#: appGUI/MainGUI.py:521
msgid "Online Help\tF1"
msgstr ""

#: appGUI/MainGUI.py:527 app_Main.py:3313 app_Main.py:3322
msgid "Bookmarks Manager"
msgstr ""

#: appGUI/MainGUI.py:531
msgid "Report a bug"
msgstr ""

#: appGUI/MainGUI.py:534
msgid "Excellon Specification"
msgstr ""

#: appGUI/MainGUI.py:536
msgid "Gerber Specification"
msgstr ""

#: appGUI/MainGUI.py:541
msgid "Shortcuts List\tF3"
msgstr ""

#: appGUI/MainGUI.py:543
msgid "YouTube Channel\tF4"
msgstr ""

#: appGUI/MainGUI.py:548
msgid "How To"
msgstr ""

#: appGUI/MainGUI.py:551 app_Main.py:2770
msgid "About FlatCAM"
msgstr ""

#: appGUI/MainGUI.py:560
msgid "Add Circle\tO"
msgstr ""

#: appGUI/MainGUI.py:563
msgid "Add Arc\tA"
msgstr ""

#: appGUI/MainGUI.py:566
msgid "Add Rectangle\tR"
msgstr ""

#: appGUI/MainGUI.py:569
msgid "Add Polygon\tN"
msgstr ""

#: appGUI/MainGUI.py:572
msgid "Add Path\tP"
msgstr ""

#: appGUI/MainGUI.py:575
msgid "Add Text\tT"
msgstr ""

#: appGUI/MainGUI.py:578
msgid "Polygon Union\tU"
msgstr ""

#: appGUI/MainGUI.py:580
msgid "Polygon Intersection\tE"
msgstr ""

#: appGUI/MainGUI.py:582
msgid "Polygon Subtraction\tS"
msgstr ""

#: appGUI/MainGUI.py:586
msgid "Cut Path\tX"
msgstr ""

#: appGUI/MainGUI.py:590
msgid "Copy Geom\tC"
msgstr ""

#: appGUI/MainGUI.py:592
msgid "Delete Shape\tDEL"
msgstr ""

#: appGUI/MainGUI.py:596 appGUI/MainGUI.py:683
msgid "Move\tM"
msgstr ""

#: appGUI/MainGUI.py:598
msgid "Buffer Tool\tB"
msgstr ""

#: appGUI/MainGUI.py:601
msgid "Paint Tool\tI"
msgstr ""

#: appGUI/MainGUI.py:604
msgid "Transform Tool\tAlt+R"
msgstr ""

#: appGUI/MainGUI.py:608
msgid "Toggle Corner Snap\tK"
msgstr ""

#: appGUI/MainGUI.py:614
msgid ">Excellon Editor<"
msgstr ""

#: appGUI/MainGUI.py:618
msgid "Add Drill Array\tA"
msgstr ""

#: appGUI/MainGUI.py:620
msgid "Add Drill\tD"
msgstr ""

#: appGUI/MainGUI.py:624
msgid "Add Slot Array\tQ"
msgstr ""

#: appGUI/MainGUI.py:626
msgid "Add Slot\tW"
msgstr ""

#: appGUI/MainGUI.py:630
msgid "Resize Drill(S)\tR"
msgstr ""

#: appGUI/MainGUI.py:633 appGUI/MainGUI.py:677
msgid "Copy\tC"
msgstr ""

#: appGUI/MainGUI.py:635 appGUI/MainGUI.py:679
msgid "Delete\tDEL"
msgstr ""

#: appGUI/MainGUI.py:640
msgid "Move Drill(s)\tM"
msgstr ""

#: appGUI/MainGUI.py:645
msgid ">Gerber Editor<"
msgstr ""

#: appGUI/MainGUI.py:649
msgid "Add Pad\tP"
msgstr ""

#: appGUI/MainGUI.py:651
msgid "Add Pad Array\tA"
msgstr ""

#: appGUI/MainGUI.py:653
msgid "Add Track\tT"
msgstr ""

#: appGUI/MainGUI.py:655
msgid "Add Region\tN"
msgstr ""

#: appGUI/MainGUI.py:659
msgid "Poligonize\tAlt+N"
msgstr ""

#: appGUI/MainGUI.py:661
msgid "Add SemiDisc\tE"
msgstr ""

#: appGUI/MainGUI.py:663
msgid "Add Disc\tD"
msgstr ""

#: appGUI/MainGUI.py:665
msgid "Buffer\tB"
msgstr ""

#: appGUI/MainGUI.py:667
msgid "Scale\tS"
msgstr ""

#: appGUI/MainGUI.py:669
msgid "Mark Area\tAlt+A"
msgstr ""

#: appGUI/MainGUI.py:671
msgid "Eraser\tCtrl+E"
msgstr ""

#: appGUI/MainGUI.py:673
msgid "Transform\tAlt+R"
msgstr ""

#: appGUI/MainGUI.py:700
msgid "Enable Plot"
msgstr ""

#: appGUI/MainGUI.py:702
msgid "Disable Plot"
msgstr ""

#: appGUI/MainGUI.py:706
msgid "Set Color"
msgstr ""

#: appGUI/MainGUI.py:709 app_Main.py:10165
msgid "Red"
msgstr ""

#: appGUI/MainGUI.py:712 app_Main.py:10167
msgid "Blue"
msgstr ""

#: appGUI/MainGUI.py:715 app_Main.py:10170
msgid "Yellow"
msgstr ""

#: appGUI/MainGUI.py:718 app_Main.py:10172
msgid "Green"
msgstr ""

#: appGUI/MainGUI.py:721 app_Main.py:10174
msgid "Purple"
msgstr ""

#: appGUI/MainGUI.py:724 app_Main.py:10176
msgid "Brown"
msgstr ""

#: appGUI/MainGUI.py:727 app_Main.py:10178 app_Main.py:10234
msgid "White"
msgstr ""

#: appGUI/MainGUI.py:730 app_Main.py:10180
msgid "Black"
msgstr ""

#: appGUI/MainGUI.py:735 app_Main.py:10183
msgid "Custom"
msgstr ""

#: appGUI/MainGUI.py:740 app_Main.py:10217
msgid "Opacity"
msgstr ""

#: appGUI/MainGUI.py:743 app_Main.py:10193
msgid "Default"
msgstr ""

#: appGUI/MainGUI.py:748
msgid "Generate CNC"
msgstr ""

#: appGUI/MainGUI.py:750
msgid "View Source"
msgstr ""

#: appGUI/MainGUI.py:755 appGUI/MainGUI.py:874 appGUI/MainGUI.py:1091 appGUI/MainGUI.py:1575
#: appGUI/MainGUI.py:2032 appGUI/MainGUI.py:2245 appGUI/MainGUI.py:4680
#: appGUI/ObjectUI.py:1000 appObjects/FlatCAMGeometry.py:552 appTools/ToolPanelize.py:325
#: appTools/ToolPanelize.py:351 appTools/ToolPanelize.py:448 appTools/ToolPanelize.py:477
#: appTools/ToolPanelize.py:538
msgid "Copy"
msgstr ""

#: appGUI/MainGUI.py:763 appGUI/MainGUI.py:1588 appTools/ToolProperties.py:31
msgid "Properties"
msgstr ""

#: appGUI/MainGUI.py:792
msgid "File Toolbar"
msgstr ""

#: appGUI/MainGUI.py:796
msgid "Edit Toolbar"
msgstr ""

#: appGUI/MainGUI.py:800
msgid "View Toolbar"
msgstr ""

#: appGUI/MainGUI.py:804
msgid "Shell Toolbar"
msgstr ""

#: appGUI/MainGUI.py:808
msgid "Tools Toolbar"
msgstr ""

#: appGUI/MainGUI.py:812
msgid "Excellon Editor Toolbar"
msgstr ""

#: appGUI/MainGUI.py:818
msgid "Geometry Editor Toolbar"
msgstr ""

#: appGUI/MainGUI.py:822
msgid "Gerber Editor Toolbar"
msgstr ""

#: appGUI/MainGUI.py:827 appGUI/MainGUI.py:1886
msgid "Delta Coordinates Toolbar"
msgstr ""

#: appGUI/MainGUI.py:830 appGUI/MainGUI.py:1894
msgid "Coordinates Toolbar"
msgstr ""

#: appGUI/MainGUI.py:833 appGUI/MainGUI.py:1902
msgid "Grid Toolbar"
msgstr ""

#: appGUI/MainGUI.py:842 appGUI/MainGUI.py:1910
msgid "Status Toolbar"
msgstr ""

#: appGUI/MainGUI.py:854 appGUI/MainGUI.py:2011 app_Main.py:7087 app_Main.py:7092
msgid "Open Gerber"
msgstr ""

#: appGUI/MainGUI.py:856 appGUI/MainGUI.py:2013 app_Main.py:7127 app_Main.py:7132
msgid "Open Excellon"
msgstr ""

#: appGUI/MainGUI.py:859 appGUI/MainGUI.py:2016
msgid "Open project"
msgstr ""

#: appGUI/MainGUI.py:861 appGUI/MainGUI.py:2018
msgid "Save project"
msgstr ""

#: appGUI/MainGUI.py:867 appGUI/MainGUI.py:2024
msgid "Editor"
msgstr ""

#: appGUI/MainGUI.py:869 appGUI/MainGUI.py:2027
msgid "Save Object and close the Editor"
msgstr ""

#: appGUI/MainGUI.py:876 appGUI/MainGUI.py:2034
msgid "&Delete"
msgstr ""

#: appGUI/MainGUI.py:879 appGUI/MainGUI.py:2037 appGUI/MainGUI.py:4269
#: appGUI/MainGUI.py:4477 appTools/ToolDistance.py:100 appTools/ToolDistance.py:544
msgid "Distance Tool"
msgstr ""

#: appGUI/MainGUI.py:881 appGUI/MainGUI.py:2039
msgid "Distance Min Tool"
msgstr ""

#: appGUI/MainGUI.py:883 appGUI/MainGUI.py:2041 appGUI/MainGUI.py:4262
msgid "Set Origin"
msgstr ""

#: appGUI/MainGUI.py:885 appGUI/MainGUI.py:2043
msgid "Move to Origin"
msgstr ""

#: appGUI/MainGUI.py:888 appGUI/MainGUI.py:2045
msgid "Jump to Location"
msgstr ""

#: appGUI/MainGUI.py:890 appGUI/MainGUI.py:2047 appGUI/MainGUI.py:4274
msgid "Locate in Object"
msgstr ""

#: appGUI/MainGUI.py:896 appGUI/MainGUI.py:2053
msgid "&Replot"
msgstr ""

#: appGUI/MainGUI.py:898 appGUI/MainGUI.py:2055
msgid "&Clear plot"
msgstr ""

#: appGUI/MainGUI.py:900 appGUI/MainGUI.py:2057 appGUI/MainGUI.py:4265
msgid "Zoom In"
msgstr ""

#: appGUI/MainGUI.py:902 appGUI/MainGUI.py:2059 appGUI/MainGUI.py:4265
msgid "Zoom Out"
msgstr ""

#: appGUI/MainGUI.py:904 appGUI/MainGUI.py:1479 appGUI/MainGUI.py:2061
#: appGUI/MainGUI.py:4264
msgid "Zoom Fit"
msgstr ""

#: appGUI/MainGUI.py:912 appGUI/MainGUI.py:2067
msgid "&Command Line"
msgstr ""

#: appGUI/MainGUI.py:924 appGUI/MainGUI.py:2079
msgid "2Sided Tool"
msgstr ""

#: appGUI/MainGUI.py:926 appGUI/MainGUI.py:2081 appGUI/MainGUI.py:4280
msgid "Align Objects Tool"
msgstr ""

#: appGUI/MainGUI.py:928 appGUI/MainGUI.py:2083 appGUI/MainGUI.py:4280
#: appTools/ToolExtractDrills.py:98
msgid "Extract Drills Tool"
msgstr ""

#: appGUI/MainGUI.py:931 appGUI/ObjectUI.py:361 appTools/ToolCutOut.py:150
#: appTools/ToolCutOut.py:1811
msgid "Cutout Tool"
msgstr ""

#: appGUI/MainGUI.py:933 appGUI/MainGUI.py:2088 appGUI/ObjectUI.py:346
#: appGUI/ObjectUI.py:1661 appTools/ToolNCC.py:197
msgid "NCC Tool"
msgstr ""

#: appGUI/MainGUI.py:937 appGUI/MainGUI.py:2092 appGUI/MainGUI.py:4282
#: appTools/ToolIsolation.py:189 appTools/ToolIsolation.py:2900
msgid "Isolation Tool"
msgstr ""

#: appGUI/MainGUI.py:939 appGUI/MainGUI.py:2094 appGUI/ObjectUI.py:641
#: appTools/ToolDrilling.py:244 appTools/ToolDrilling.py:1965 appTools/ToolMilling.py:169
msgid "Drilling Tool"
msgstr ""

#: appGUI/MainGUI.py:943 appGUI/MainGUI.py:2098
msgid "Panel Tool"
msgstr ""

#: appGUI/MainGUI.py:945 appGUI/MainGUI.py:2100 appTools/ToolFilm.py:106
msgid "Film Tool"
msgstr ""

#: appGUI/MainGUI.py:947 appGUI/MainGUI.py:2102 appTools/ToolSolderPaste.py:116
msgid "SolderPaste Tool"
msgstr ""

#: appGUI/MainGUI.py:949 appGUI/MainGUI.py:2104 appGUI/MainGUI.py:4287
#: appTools/ToolSub.py:611
msgid "Subtract Tool"
msgstr ""

#: appGUI/MainGUI.py:951 appGUI/MainGUI.py:2106 appTools/ToolRulesCheck.py:115
msgid "Rules Tool"
msgstr ""

#: appGUI/MainGUI.py:953 appGUI/MainGUI.py:2108 appGUI/MainGUI.py:4284
#: appTools/ToolOptimal.py:103 appTools/ToolOptimal.py:390
msgid "Optimal Tool"
msgstr ""

#: appGUI/MainGUI.py:958 appGUI/MainGUI.py:2113 appGUI/MainGUI.py:4280
msgid "Calculators Tool"
msgstr ""

#: appGUI/MainGUI.py:962 appGUI/MainGUI.py:2117 appGUI/MainGUI.py:4285
#: appTools/ToolQRCode.py:114 appTools/ToolQRCode.py:625
msgid "QRCode Tool"
msgstr ""

#: appGUI/MainGUI.py:964 appGUI/MainGUI.py:2119 appGUI/MainGUI.py:4282
#: appTools/ToolCopperThieving.py:126 appTools/ToolCopperThieving.py:1131
msgid "Copper Thieving Tool"
msgstr ""

#: appGUI/MainGUI.py:967 appGUI/MainGUI.py:2122 appGUI/MainGUI.py:4281
#: appTools/ToolFiducials.py:114 appTools/ToolFiducials.py:648
msgid "Fiducials Tool"
msgstr ""

#: appGUI/MainGUI.py:969 appGUI/MainGUI.py:2124 appTools/ToolCalibration.py:115
#: appTools/ToolCalibration.py:735
msgid "Calibration Tool"
msgstr ""

#: appGUI/MainGUI.py:971 appGUI/MainGUI.py:2126 appGUI/MainGUI.py:4282
msgid "Punch Gerber Tool"
msgstr ""

#: appGUI/MainGUI.py:973 appGUI/MainGUI.py:2128 appTools/ToolInvertGerber.py:175
msgid "Invert Gerber Tool"
msgstr ""

#: appGUI/MainGUI.py:975 appGUI/MainGUI.py:2130 appGUI/MainGUI.py:4284
#: appTools/ToolCorners.py:297
msgid "Corner Markers Tool"
msgstr ""

#: appGUI/MainGUI.py:977 appGUI/MainGUI.py:2132 appTools/ToolEtchCompensation.py:80
#: appTools/ToolEtchCompensation.py:251
msgid "Etch Compensation Tool"
msgstr ""

#: appGUI/MainGUI.py:983 appGUI/MainGUI.py:1009 appGUI/MainGUI.py:1061
#: appGUI/MainGUI.py:2138 appGUI/MainGUI.py:2216
msgid "Select"
msgstr ""

#: appGUI/MainGUI.py:985 appGUI/MainGUI.py:2140
msgid "Add Drill Hole"
msgstr ""

#: appGUI/MainGUI.py:987 appGUI/MainGUI.py:2142
msgid "Add Drill Hole Array"
msgstr ""

#: appGUI/MainGUI.py:989 appGUI/MainGUI.py:1567 appGUI/MainGUI.py:2146
#: appGUI/MainGUI.py:4562
msgid "Add Slot"
msgstr ""

#: appGUI/MainGUI.py:991 appGUI/MainGUI.py:1569 appGUI/MainGUI.py:2148
#: appGUI/MainGUI.py:4561
msgid "Add Slot Array"
msgstr ""

#: appGUI/MainGUI.py:993 appGUI/MainGUI.py:1572 appGUI/MainGUI.py:2144
msgid "Resize Drill"
msgstr ""

#: appGUI/MainGUI.py:997 appGUI/MainGUI.py:2152
msgid "Copy Drill"
msgstr ""

#: appGUI/MainGUI.py:999 appGUI/MainGUI.py:2154
msgid "Delete Drill"
msgstr ""

#: appGUI/MainGUI.py:1003 appGUI/MainGUI.py:2158
msgid "Move Drill"
msgstr ""

#: appGUI/MainGUI.py:1011 appGUI/MainGUI.py:2166
msgid "Add Circle"
msgstr ""

#: appGUI/MainGUI.py:1013 appGUI/MainGUI.py:2168
msgid "Add Arc"
msgstr ""

#: appGUI/MainGUI.py:1015 appGUI/MainGUI.py:2170
msgid "Add Rectangle"
msgstr ""

#: appGUI/MainGUI.py:1019 appGUI/MainGUI.py:2174
msgid "Add Path"
msgstr ""

#: appGUI/MainGUI.py:1021 appGUI/MainGUI.py:2176
msgid "Add Polygon"
msgstr ""

#: appGUI/MainGUI.py:1024 appGUI/MainGUI.py:2179
msgid "Add Text"
msgstr ""

#: appGUI/MainGUI.py:1026 appGUI/MainGUI.py:2181
msgid "Add Buffer"
msgstr ""

#: appGUI/MainGUI.py:1028 appGUI/MainGUI.py:2183
msgid "Paint Shape"
msgstr ""

#: appGUI/MainGUI.py:1030 appGUI/MainGUI.py:1087 appGUI/MainGUI.py:1508
#: appGUI/MainGUI.py:1553 appGUI/MainGUI.py:2185 appGUI/MainGUI.py:2241
msgid "Eraser"
msgstr ""

#: appGUI/MainGUI.py:1034 appGUI/MainGUI.py:2189
msgid "Polygon Union"
msgstr ""

#: appGUI/MainGUI.py:1036 appGUI/MainGUI.py:2191
msgid "Polygon Explode"
msgstr ""

#: appGUI/MainGUI.py:1039 appGUI/MainGUI.py:2194
msgid "Polygon Intersection"
msgstr ""

#: appGUI/MainGUI.py:1041 appGUI/MainGUI.py:2196
msgid "Polygon Subtraction"
msgstr ""

#: appGUI/MainGUI.py:1045 appGUI/MainGUI.py:2200
msgid "Cut Path"
msgstr ""

#: appGUI/MainGUI.py:1047
msgid "Copy Shape(s)"
msgstr ""

#: appGUI/MainGUI.py:1050
msgid "Delete Shape '-'"
msgstr ""

#: appGUI/MainGUI.py:1052 appGUI/MainGUI.py:1095 appGUI/MainGUI.py:1520
#: appGUI/MainGUI.py:1557 appGUI/MainGUI.py:2206 appGUI/MainGUI.py:2249
#: appGUI/ObjectUI.py:109 appGUI/ObjectUI.py:152
msgid "Transformations"
msgstr ""

#: appGUI/MainGUI.py:1055
msgid "Move Objects "
msgstr ""

#: appGUI/MainGUI.py:1063 appGUI/MainGUI.py:2218 appGUI/MainGUI.py:4681
msgid "Add Pad"
msgstr ""

#: appGUI/MainGUI.py:1067 appGUI/MainGUI.py:2222 appGUI/MainGUI.py:4682
msgid "Add Track"
msgstr ""

#: appGUI/MainGUI.py:1069 appGUI/MainGUI.py:2224 appGUI/MainGUI.py:4681
msgid "Add Region"
msgstr ""

#: appGUI/MainGUI.py:1071 appGUI/MainGUI.py:1539 appGUI/MainGUI.py:2226
msgid "Poligonize"
msgstr ""

#: appGUI/MainGUI.py:1074 appGUI/MainGUI.py:1541 appGUI/MainGUI.py:2229
msgid "SemiDisc"
msgstr ""

#: appGUI/MainGUI.py:1076 appGUI/MainGUI.py:1543 appGUI/MainGUI.py:2231
msgid "Disc"
msgstr ""

#: appGUI/MainGUI.py:1084 appGUI/MainGUI.py:1551 appGUI/MainGUI.py:2239
msgid "Mark Area"
msgstr ""

#: appGUI/MainGUI.py:1098 appGUI/MainGUI.py:1524 appGUI/MainGUI.py:1586
#: appGUI/MainGUI.py:2252 appGUI/MainGUI.py:4681 appTools/ToolMove.py:27
msgid "Move"
msgstr ""

#: appGUI/MainGUI.py:1106
msgid "Snap to grid"
msgstr ""

#: appGUI/MainGUI.py:1109
msgid "Grid X snapping distance"
msgstr ""

#: appGUI/MainGUI.py:1114
msgid ""
"When active, value on Grid_X\n"
"is copied to the Grid_Y value."
msgstr ""

#: appGUI/MainGUI.py:1121
msgid "Grid Y snapping distance"
msgstr ""

#: appGUI/MainGUI.py:1128
msgid "Snap to corner"
msgstr ""

#: appGUI/MainGUI.py:1132 appGUI/preferences/general/GeneralAPPSetGroupUI.py:78
msgid "Max. magnet distance"
msgstr ""

#: appGUI/MainGUI.py:1142
msgid "Toggle the display of axis on canvas"
msgstr ""

#: appGUI/MainGUI.py:1148 appGUI/preferences/PreferencesUIManager.py:889
#: appGUI/preferences/PreferencesUIManager.py:982
#: appGUI/preferences/PreferencesUIManager.py:1010
#: appGUI/preferences/PreferencesUIManager.py:1115 app_Main.py:5579 app_Main.py:5584
#: app_Main.py:5599
msgid "Preferences"
msgstr ""

#: appGUI/MainGUI.py:1154
msgid "Command Line"
msgstr ""

#: appGUI/MainGUI.py:1160
msgid "HUD (Heads up display)"
msgstr ""

#: appGUI/MainGUI.py:1166 appGUI/preferences/general/GeneralAPPSetGroupUI.py:97
msgid ""
"Draw a delimiting rectangle on canvas.\n"
"The purpose is to illustrate the limits for our work."
msgstr ""

#: appGUI/MainGUI.py:1179
msgid ""
"Relative measurement.\n"
"Reference is last click position"
msgstr ""

#: appGUI/MainGUI.py:1187
msgid ""
"Absolute measurement.\n"
"Reference is (X=0, Y= 0) position"
msgstr ""

#: appGUI/MainGUI.py:1221 appGUI/MainGUI.py:1470 app_Main.py:8126
msgid "Project"
msgstr ""

#: appGUI/MainGUI.py:1236
msgid "Selected"
msgstr ""

#: appGUI/MainGUI.py:1264 appGUI/MainGUI.py:1272
msgid "Plot Area"
msgstr ""

#: appGUI/MainGUI.py:1314 appTools/ToolCopperThieving.py:1163 appTools/ToolCorners.py:317
#: appTools/ToolEtchCompensation.py:291 appTools/ToolExtractDrills.py:453
#: appTools/ToolFiducials.py:873 appTools/ToolInvertGerber.py:215
#: appTools/ToolIsolation.py:2948 appTools/ToolOptimal.py:421
#: appTools/ToolPunchGerber.py:718 appTools/ToolQRCode.py:656
#: appTools/ToolRulesCheck.py:1163 appTools/ToolSolderPaste.py:1143 appTools/ToolSub.py:641
msgid "GERBER"
msgstr ""

#: appGUI/MainGUI.py:1324 appTools/ToolDrilling.py:2018 appTools/ToolMilling.py:1637
#: appTools/ToolRulesCheck.py:1301
msgid "EXCELLON"
msgstr ""

#: appGUI/MainGUI.py:1334 appTools/ToolSub.py:696
msgid "GEOMETRY"
msgstr ""

#: appGUI/MainGUI.py:1344
msgid "CNC-JOB"
msgstr ""

#: appGUI/MainGUI.py:1353 appGUI/ObjectUI.py:327 appGUI/ObjectUI.py:637
#: appGUI/ObjectUI.py:1635
msgid "TOOLS"
msgstr ""

#: appGUI/MainGUI.py:1362
msgid "TOOLS 2"
msgstr ""

#: appGUI/MainGUI.py:1372
msgid "UTILITIES"
msgstr ""

#: appGUI/MainGUI.py:1388 appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:201
msgid "Restore Defaults"
msgstr ""

#: appGUI/MainGUI.py:1392
msgid ""
"Restore the entire set of default values\n"
"to the initial values loaded after first launch."
msgstr ""

#: appGUI/MainGUI.py:1397
msgid "Open Pref Folder"
msgstr ""

#: appGUI/MainGUI.py:1401
msgid "Open the folder where FlatCAM save the preferences files."
msgstr ""

#: appGUI/MainGUI.py:1405 appGUI/MainGUI.py:1982
msgid "Clear GUI Settings"
msgstr ""

#: appGUI/MainGUI.py:1410
msgid ""
"Clear the GUI settings for FlatCAM,\n"
"such as: layout, gui state, style, hdpi support etc."
msgstr ""

#: appGUI/MainGUI.py:1422
msgid "Apply"
msgstr ""

#: appGUI/MainGUI.py:1425
msgid "Apply the current preferences without saving to a file."
msgstr ""

#: appGUI/MainGUI.py:1433
msgid ""
"Save the current settings in the 'current_defaults' file\n"
"which is the file storing the working default preferences."
msgstr ""

#: appGUI/MainGUI.py:1441
msgid "Will not save the changes and will close the preferences window."
msgstr ""

#: appGUI/MainGUI.py:1455
msgid "Toggle Visibility"
msgstr ""

#: appGUI/MainGUI.py:1461 appGUI/ObjectUI.py:2143
msgid "New"
msgstr ""

#: appGUI/MainGUI.py:1463 appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:78
#: appTools/ToolCalibration.py:171 appTools/ToolCalibration.py:1326
#: appTools/ToolCalibration.py:1343 appTools/ToolCopperThieving.py:163
#: appTools/ToolCopperThieving.py:1237 appTools/ToolCopperThieving.py:1251
#: appTools/ToolCutOut.py:1769 appTools/ToolDblSided.py:529 appTools/ToolDblSided.py:774
#: appTools/ToolFilm.py:782 appTools/ToolFilm.py:805 appTools/ToolImage.py:136
#: appTools/ToolImage.py:191 appTools/ToolIsolation.py:796 appTools/ToolIsolation.py:3283
#: appTools/ToolIsolation.py:3336 appTools/ToolNCC.py:792 appTools/ToolNCC.py:3740
#: appTools/ToolNCC.py:4209 appTools/ToolPaint.py:167 appTools/ToolPaint.py:3141
#: appTools/ToolPanelize.py:147 appTools/ToolPanelize.py:167 appTools/ToolPanelize.py:715
#: appTools/ToolTransform.py:126 appTools/ToolTransform.py:587
msgid "Geometry"
msgstr ""

#: appGUI/MainGUI.py:1467 appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:99
#: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:77 appTools/ToolAlignObjects.py:399
#: appTools/ToolAlignObjects.py:435 appTools/ToolCalibration.py:163
#: appTools/ToolCalibration.py:171 appTools/ToolCalibration.py:892
#: appTools/ToolCalibration.py:1326 appTools/ToolCalibration.py:1343
#: appTools/ToolCopperThieving.py:163 appTools/ToolCopperThieving.py:1237
#: appTools/ToolCopperThieving.py:1251 appTools/ToolDblSided.py:530
#: appTools/ToolDblSided.py:731 appTools/ToolDblSided.py:773 appTools/ToolFilm.py:1060
#: appTools/ToolIsolation.py:796 appTools/ToolIsolation.py:3336 appTools/ToolNCC.py:792
#: appTools/ToolNCC.py:4209 appTools/ToolPaint.py:167 appTools/ToolPaint.py:3141
#: appTools/ToolPanelize.py:147 appTools/ToolPunchGerber.py:803
#: appTools/ToolPunchGerber.py:818 appTools/ToolTransform.py:126
#: appTools/ToolTransform.py:586
msgid "Excellon"
msgstr ""

#: appGUI/MainGUI.py:1474
msgid "Grids"
msgstr ""

#: appGUI/MainGUI.py:1481
msgid "Clear Plot"
msgstr ""

#: appGUI/MainGUI.py:1483
msgid "Replot"
msgstr ""

#: appGUI/MainGUI.py:1487
msgid "Geo Editor"
msgstr ""

#: appGUI/MainGUI.py:1489
msgid "Path"
msgstr ""

#: appGUI/MainGUI.py:1491
msgid "Rectangle"
msgstr ""

#: appGUI/MainGUI.py:1494
msgid "Circle"
msgstr ""

#: appGUI/MainGUI.py:1498
msgid "Arc"
msgstr ""

#: appGUI/MainGUI.py:1512
msgid "Union"
msgstr ""

#: appGUI/MainGUI.py:1514
msgid "Intersection"
msgstr ""

#: appGUI/MainGUI.py:1516
msgid "Subtraction"
msgstr ""

#: appGUI/MainGUI.py:1518 appGUI/ObjectUI.py:1728
#: appGUI/preferences/cncjob/CNCJobOptPrefGroupUI.py:63
msgid "Cut"
msgstr ""

#: appGUI/MainGUI.py:1529
msgid "Pad"
msgstr ""

#: appGUI/MainGUI.py:1531
msgid "Pad Array"
msgstr ""

#: appGUI/MainGUI.py:1535
msgid "Track"
msgstr ""

#: appGUI/MainGUI.py:1537
msgid "Region"
msgstr ""

#: appGUI/MainGUI.py:1560
msgid "Exc Editor"
msgstr ""

#: appGUI/MainGUI.py:1562 appGUI/MainGUI.py:4560
msgid "Add Drill"
msgstr ""

#: appGUI/MainGUI.py:1581 app_Main.py:2285
msgid "Close Editor"
msgstr ""

#: appGUI/MainGUI.py:1612
msgid "Application units"
msgstr ""

#: appGUI/MainGUI.py:1707
msgid "Lock Toolbars"
msgstr ""

#: appGUI/MainGUI.py:1863
msgid "Detachable Tabs"
msgstr ""

#: appGUI/MainGUI.py:1963
msgid "FlatCAM Preferences Folder opened."
msgstr ""

#: appGUI/MainGUI.py:1981
msgid "Are you sure you want to delete the GUI Settings? \n"
msgstr ""

#: appGUI/MainGUI.py:1986 appGUI/preferences/PreferencesUIManager.py:921
#: appGUI/preferences/PreferencesUIManager.py:1167 appTranslation.py:112
#: appTranslation.py:214 app_Main.py:2289 app_Main.py:3384 app_Main.py:5809 app_Main.py:6876
msgid "Yes"
msgstr ""

#: appGUI/MainGUI.py:1987 appGUI/preferences/PreferencesUIManager.py:1168
#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:49
#: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:62
#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:164
#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:150 appTools/ToolDrilling.py:2076
#: appTools/ToolIsolation.py:3028 appTools/ToolMilling.py:1695 appTools/ToolNCC.py:3827
#: appTools/ToolPaint.py:2850 appTranslation.py:113 appTranslation.py:215 app_Main.py:2290
#: app_Main.py:3385 app_Main.py:5810 app_Main.py:6877
msgid "No"
msgstr ""

#: appGUI/MainGUI.py:2086
msgid "&Cutout Tool"
msgstr ""

#: appGUI/MainGUI.py:2164
msgid "Select 'Esc'"
msgstr ""

#: appGUI/MainGUI.py:2202
msgid "Copy Objects"
msgstr ""

#: appGUI/MainGUI.py:2204 appGUI/MainGUI.py:4480
msgid "Delete Shape"
msgstr ""

#: appGUI/MainGUI.py:2210
msgid "Move Objects"
msgstr ""

#: appGUI/MainGUI.py:2796
msgid ""
"Please first select a geometry item to be cutted\n"
"then select the geometry item that will be cutted\n"
"out of the first item. In the end press ~X~ key or\n"
"the toolbar button."
msgstr ""

#: appGUI/MainGUI.py:2803 appGUI/MainGUI.py:2967 appGUI/MainGUI.py:3014
#: appGUI/MainGUI.py:3036
msgid "Warning"
msgstr ""

#: appGUI/MainGUI.py:2962
msgid ""
"Please select geometry items \n"
"on which to perform Intersection Tool."
msgstr ""

#: appGUI/MainGUI.py:3009
msgid ""
"Please select geometry items \n"
"on which to perform Substraction Tool."
msgstr ""

#: appGUI/MainGUI.py:3031
msgid ""
"Please select geometry items \n"
"on which to perform union."
msgstr ""

#: appGUI/MainGUI.py:3116 appGUI/MainGUI.py:3331
msgid "Cancelled. Nothing selected to delete."
msgstr ""

#: appGUI/MainGUI.py:3200 appGUI/MainGUI.py:3447
msgid "Cancelled. Nothing selected to copy."
msgstr ""

#: appGUI/MainGUI.py:3246 appGUI/MainGUI.py:3476
msgid "Cancelled. Nothing selected to move."
msgstr ""

#: appGUI/MainGUI.py:3502
msgid "New Tool ..."
msgstr ""

#: appGUI/MainGUI.py:3503 appTools/ToolIsolation.py:777 appTools/ToolNCC.py:450
#: appTools/ToolPaint.py:387 appTools/ToolSolderPaste.py:123
msgid "Enter a Tool Diameter"
msgstr ""

#: appGUI/MainGUI.py:3515
msgid "Adding Tool cancelled ..."
msgstr ""

#: appGUI/MainGUI.py:3545
msgid "Distance Tool exit..."
msgstr ""

#: appGUI/MainGUI.py:3725 app_Main.py:3372
msgid "Application is saving the project. Please wait ..."
msgstr ""

#: appGUI/MainGUI.py:3858
msgid "Shell enabled."
msgstr ""

#: appGUI/MainGUI.py:3861
msgid "Shell disabled."
msgstr ""

#: appGUI/MainGUI.py:3875 app_Main.py:9676
msgid "<b>Shortcut Key List</b>"
msgstr ""

#: appGUI/MainGUI.py:4258
msgid "General Shortcut list"
msgstr ""

#: appGUI/MainGUI.py:4259
msgid "SHOW SHORTCUT LIST"
msgstr ""

#: appGUI/MainGUI.py:4259
msgid "Switch to Project Tab"
msgstr ""

#: appGUI/MainGUI.py:4259
msgid "Switch to Selected Tab"
msgstr ""

#: appGUI/MainGUI.py:4260
msgid "Switch to Tool Tab"
msgstr ""

#: appGUI/MainGUI.py:4261
msgid "New Gerber"
msgstr ""

#: appGUI/MainGUI.py:4261
msgid "Edit Object (if selected)"
msgstr ""

#: appGUI/MainGUI.py:4261 app_Main.py:6109
msgid "Grid On/Off"
msgstr ""

#: appGUI/MainGUI.py:4261
msgid "Jump to Coordinates"
msgstr ""

#: appGUI/MainGUI.py:4262
msgid "New Excellon"
msgstr ""

#: appGUI/MainGUI.py:4262
msgid "Move Obj"
msgstr ""

#: appGUI/MainGUI.py:4262
msgid "New Geometry"
msgstr ""

#: appGUI/MainGUI.py:4262
msgid "Change Units"
msgstr ""

#: appGUI/MainGUI.py:4263
msgid "Open Properties Tool"
msgstr ""

#: appGUI/MainGUI.py:4263
msgid "Rotate by 90 degree CW"
msgstr ""

#: appGUI/MainGUI.py:4263
msgid "Shell Toggle"
msgstr ""

#: appGUI/MainGUI.py:4264
msgid "Add a Tool (when in Geometry Selected Tab or in Tools NCC or Tools Paint)"
msgstr ""

#: appGUI/MainGUI.py:4265
msgid "Flip on X_axis"
msgstr ""

#: appGUI/MainGUI.py:4265
msgid "Flip on Y_axis"
msgstr ""

#: appGUI/MainGUI.py:4268
msgid "Copy Obj"
msgstr ""

#: appGUI/MainGUI.py:4268
msgid "Open Tools Database"
msgstr ""

#: appGUI/MainGUI.py:4269
msgid "Open Excellon File"
msgstr ""

#: appGUI/MainGUI.py:4269
msgid "Open Gerber File"
msgstr ""

#: appGUI/MainGUI.py:4269
msgid "New Project"
msgstr ""

#: appGUI/MainGUI.py:4270 app_Main.py:7206 app_Main.py:7209
msgid "Open Project"
msgstr ""

#: appGUI/MainGUI.py:4270 appTools/ToolPDF.py:41
msgid "PDF Import Tool"
msgstr ""

#: appGUI/MainGUI.py:4270
msgid "Save Project"
msgstr ""

#: appGUI/MainGUI.py:4270
msgid "Toggle Plot Area"
msgstr ""

#: appGUI/MainGUI.py:4273
msgid "Copy Obj_Name"
msgstr ""

#: appGUI/MainGUI.py:4274
msgid "Toggle Code Editor"
msgstr ""

#: appGUI/MainGUI.py:4274
msgid "Toggle the axis"
msgstr ""

#: appGUI/MainGUI.py:4274 appGUI/MainGUI.py:4475 appGUI/MainGUI.py:4562
#: appGUI/MainGUI.py:4684
msgid "Distance Minimum Tool"
msgstr ""

#: appGUI/MainGUI.py:4275
msgid "Open Preferences Window"
msgstr ""

#: appGUI/MainGUI.py:4276
msgid "Rotate by 90 degree CCW"
msgstr ""

#: appGUI/MainGUI.py:4276
msgid "Run a Script"
msgstr ""

#: appGUI/MainGUI.py:4276
msgid "Toggle the workspace"
msgstr ""

#: appGUI/MainGUI.py:4276
msgid "Skew on X axis"
msgstr ""

#: appGUI/MainGUI.py:4277
msgid "Skew on Y axis"
msgstr ""

#: appGUI/MainGUI.py:4280
msgid "2-Sided PCB Tool"
msgstr ""

#: appGUI/MainGUI.py:4281
msgid "Toggle Grid Lines"
msgstr ""

#: appGUI/MainGUI.py:4283
msgid "Solder Paste Dispensing Tool"
msgstr ""

#: appGUI/MainGUI.py:4284
msgid "Film PCB Tool"
msgstr ""

#: appGUI/MainGUI.py:4284
msgid "Non-Copper Clearing Tool"
msgstr ""

#: appGUI/MainGUI.py:4285
msgid "Paint Area Tool"
msgstr ""

#: appGUI/MainGUI.py:4285
msgid "Rules Check Tool"
msgstr ""

#: appGUI/MainGUI.py:4286
msgid "View File Source"
msgstr ""

#: appGUI/MainGUI.py:4286
msgid "Transformations Tool"
msgstr ""

#: appGUI/MainGUI.py:4287
msgid "Cutout PCB Tool"
msgstr ""

#: appGUI/MainGUI.py:4287 appTools/ToolPanelize.py:35 appTools/ToolPanelize.py:634
msgid "Panelize PCB"
msgstr ""

#: appGUI/MainGUI.py:4288
msgid "Enable all Plots"
msgstr ""

#: appGUI/MainGUI.py:4288
msgid "Disable all Plots"
msgstr ""

#: appGUI/MainGUI.py:4288
msgid "Disable Non-selected Plots"
msgstr ""

#: appGUI/MainGUI.py:4289
msgid "Toggle Full Screen"
msgstr ""

#: appGUI/MainGUI.py:4292
msgid "Abort current task (gracefully)"
msgstr ""

#: appGUI/MainGUI.py:4295
msgid "Save Project As"
msgstr ""

#: appGUI/MainGUI.py:4296
msgid "Paste Special. Will convert a Windows path style to the one required in Tcl Shell"
msgstr ""

#: appGUI/MainGUI.py:4299
msgid "Open Online Manual"
msgstr ""

#: appGUI/MainGUI.py:4300
msgid "Open Online Tutorials"
msgstr ""

#: appGUI/MainGUI.py:4300
msgid "Refresh Plots"
msgstr ""

#: appGUI/MainGUI.py:4300 appTools/ToolSolderPaste.py:71
msgid "Delete Object"
msgstr ""

#: appGUI/MainGUI.py:4300
msgid "Alternate: Delete Tool"
msgstr ""

#: appGUI/MainGUI.py:4301
msgid "(left to Key_1)Toggle Notebook Area (Left Side)"
msgstr ""

#: appGUI/MainGUI.py:4301
msgid "En(Dis)able Obj Plot"
msgstr ""

#: appGUI/MainGUI.py:4302
msgid "Deselects all objects"
msgstr ""

#: appGUI/MainGUI.py:4316
msgid "Editor Shortcut list"
msgstr ""

#: appGUI/MainGUI.py:4470
msgid "GEOMETRY EDITOR"
msgstr ""

#: appGUI/MainGUI.py:4470
msgid "Draw an Arc"
msgstr ""

#: appGUI/MainGUI.py:4470
msgid "Copy Geo Item"
msgstr ""

#: appGUI/MainGUI.py:4471
msgid "Within Add Arc will toogle the ARC direction: CW or CCW"
msgstr ""

#: appGUI/MainGUI.py:4471
msgid "Polygon Intersection Tool"
msgstr ""

#: appGUI/MainGUI.py:4472
msgid "Geo Paint Tool"
msgstr ""

#: appGUI/MainGUI.py:4472 appGUI/MainGUI.py:4561 appGUI/MainGUI.py:4681
msgid "Jump to Location (x, y)"
msgstr ""

#: appGUI/MainGUI.py:4472
msgid "Toggle Corner Snap"
msgstr ""

#: appGUI/MainGUI.py:4472
msgid "Move Geo Item"
msgstr ""

#: appGUI/MainGUI.py:4473
msgid "Within Add Arc will cycle through the ARC modes"
msgstr ""

#: appGUI/MainGUI.py:4473
msgid "Draw a Polygon"
msgstr ""

#: appGUI/MainGUI.py:4473
msgid "Draw a Circle"
msgstr ""

#: appGUI/MainGUI.py:4474
msgid "Draw a Path"
msgstr ""

#: appGUI/MainGUI.py:4474
msgid "Draw Rectangle"
msgstr ""

#: appGUI/MainGUI.py:4474
msgid "Polygon Subtraction Tool"
msgstr ""

#: appGUI/MainGUI.py:4474
msgid "Add Text Tool"
msgstr ""

#: appGUI/MainGUI.py:4475
msgid "Polygon Union Tool"
msgstr ""

#: appGUI/MainGUI.py:4475
msgid "Flip shape on X axis"
msgstr ""

#: appGUI/MainGUI.py:4475
msgid "Flip shape on Y axis"
msgstr ""

#: appGUI/MainGUI.py:4476
msgid "Skew shape on X axis"
msgstr ""

#: appGUI/MainGUI.py:4476
msgid "Skew shape on Y axis"
msgstr ""

#: appGUI/MainGUI.py:4476
msgid "Editor Transformation Tool"
msgstr ""

#: appGUI/MainGUI.py:4477
msgid "Offset shape on X axis"
msgstr ""

#: appGUI/MainGUI.py:4477
msgid "Offset shape on Y axis"
msgstr ""

#: appGUI/MainGUI.py:4478 appGUI/MainGUI.py:4564 appGUI/MainGUI.py:4686
msgid "Save Object and Exit Editor"
msgstr ""

#: appGUI/MainGUI.py:4478
msgid "Polygon Cut Tool"
msgstr ""

#: appGUI/MainGUI.py:4479
msgid "Rotate Geometry"
msgstr ""

#: appGUI/MainGUI.py:4479
msgid "Finish drawing for certain tools"
msgstr ""

#: appGUI/MainGUI.py:4479 appGUI/MainGUI.py:4564 appGUI/MainGUI.py:4684
msgid "Abort and return to Select"
msgstr ""

#: appGUI/MainGUI.py:4560
msgid "EXCELLON EDITOR"
msgstr ""

#: appGUI/MainGUI.py:4560
msgid "Copy Drill(s)"
msgstr ""

#: appGUI/MainGUI.py:4561
msgid "Move Drill(s)"
msgstr ""

#: appGUI/MainGUI.py:4562
msgid "Add a new Tool"
msgstr ""

#: appGUI/MainGUI.py:4563
msgid "Delete Drill(s)"
msgstr ""

#: appGUI/MainGUI.py:4563
msgid "Alternate: Delete Tool(s)"
msgstr ""

#: appGUI/MainGUI.py:4680
msgid "GERBER EDITOR"
msgstr ""

#: appGUI/MainGUI.py:4680
msgid "Add Disc"
msgstr ""

#: appGUI/MainGUI.py:4680
msgid "Add SemiDisc"
msgstr ""

#: appGUI/MainGUI.py:4682
msgid "Within Track & Region Tools will cycle in REVERSE the bend modes"
msgstr ""

#: appGUI/MainGUI.py:4683
msgid "Within Track & Region Tools will cycle FORWARD the bend modes"
msgstr ""

#: appGUI/MainGUI.py:4684
msgid "Alternate: Delete Apertures"
msgstr ""

#: appGUI/MainGUI.py:4685
msgid "Eraser Tool"
msgstr ""

#: appGUI/MainGUI.py:4686 appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:221
msgid "Mark Area Tool"
msgstr ""

#: appGUI/MainGUI.py:4686
msgid "Poligonize Tool"
msgstr ""

#: appGUI/MainGUI.py:4686
msgid "Transformation Tool"
msgstr ""

#: appGUI/ObjectUI.py:38
msgid "App Object"
msgstr ""

#: appGUI/ObjectUI.py:78 appTools/ToolDrilling.py:2001 appTools/ToolIsolation.py:2937
#: appTools/ToolMilling.py:1620
msgid ""
"BASIC is suitable for a beginner. Many parameters\n"
"are hidden from the user in this mode.\n"
"ADVANCED mode will make available all parameters.\n"
"\n"
"To change the application LEVEL, go to:\n"
"Edit -> Preferences -> General and check:\n"
"'APP. LEVEL' radio button."
msgstr ""

#: appGUI/ObjectUI.py:111 appGUI/ObjectUI.py:155
msgid "Geometrical transformations of the current object."
msgstr ""

#: appGUI/ObjectUI.py:120
msgid ""
"Factor by which to multiply\n"
"geometric features of this object.\n"
"Expressions are allowed. E.g: 1/25.4"
msgstr ""

#: appGUI/ObjectUI.py:127
msgid "Perform scaling operation."
msgstr ""

#: appGUI/ObjectUI.py:138
msgid ""
"Amount by which to move the object\n"
"in the x and y axes in (x, y) format.\n"
"Expressions are allowed. E.g: (1/3.2, 0.5*3)"
msgstr ""

#: appGUI/ObjectUI.py:145
msgid "Perform the offset operation."
msgstr ""

#: appGUI/ObjectUI.py:188
msgid "Gerber Object"
msgstr ""

#: appGUI/ObjectUI.py:197 appGUI/ObjectUI.py:497 appGUI/ObjectUI.py:777
#: appGUI/ObjectUI.py:1715 appGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:30
#: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:33
#: appGUI/preferences/geometry/GeometryGenPrefGroupUI.py:33
#: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:31
msgid "Plot Options"
msgstr ""

#: appGUI/ObjectUI.py:202 appGUI/ObjectUI.py:503
#: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:47
#: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:45
#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:119
#: appTools/ToolCopperThieving.py:1284
msgid "Solid"
msgstr ""

#: appGUI/ObjectUI.py:204 appGUI/preferences/gerber/GerberGenPrefGroupUI.py:47
msgid "Solid color polygons."
msgstr ""

#: appGUI/ObjectUI.py:209 appGUI/ObjectUI.py:511 appGUI/ObjectUI.py:783
msgid "Multi-Color"
msgstr ""

#: appGUI/ObjectUI.py:211 appGUI/ObjectUI.py:513 appGUI/ObjectUI.py:785
#: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:56
#: appGUI/preferences/geometry/GeometryGenPrefGroupUI.py:49
#: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:54
msgid "Draw polygons in different colors."
msgstr ""

#: appGUI/ObjectUI.py:226 appGUI/ObjectUI.py:544
#: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:40
#: appGUI/preferences/geometry/GeometryGenPrefGroupUI.py:40
#: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:38
msgid "Plot"
msgstr ""

#: appGUI/ObjectUI.py:227 appGUI/ObjectUI.py:546 appGUI/ObjectUI.py:847
#: appGUI/ObjectUI.py:1819 appGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:41
#: appGUI/preferences/geometry/GeometryGenPrefGroupUI.py:42
#: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:40
msgid "Plot (show) this object."
msgstr ""

#: appGUI/ObjectUI.py:251 appGUI/ObjectUI.py:539
#: appGUI/preferences/excellon/ExcellonAdvOptPrefGroupUI.py:50
#: appGUI/preferences/gerber/GerberAdvOptPrefGroupUI.py:54
msgid "Toggle the display of the Tools Table."
msgstr ""

#: appGUI/ObjectUI.py:260
msgid "Mark All"
msgstr ""

#: appGUI/ObjectUI.py:262
msgid ""
"When checked it will display all the apertures.\n"
"When unchecked, it will delete all mark shapes\n"
"that are drawn on canvas."
msgstr ""

#: appGUI/ObjectUI.py:292
msgid "Mark the aperture instances on canvas."
msgstr ""

#: appGUI/ObjectUI.py:299 appTools/ToolIsolation.py:3410
msgid "Buffer Solid Geometry"
msgstr ""

#: appGUI/ObjectUI.py:301 appTools/ToolIsolation.py:3412
msgid ""
"This button is shown only when the Gerber file\n"
"is loaded without buffering.\n"
"Clicking this will create the buffered geometry\n"
"required for isolation."
msgstr ""

#: appGUI/ObjectUI.py:312
msgid "Edit an Gerber object."
msgstr ""

#: appGUI/ObjectUI.py:331
msgid "Isolation Routing"
msgstr ""

#: appGUI/ObjectUI.py:334 appGUI/preferences/tools/ToolsISOPrefGroupUI.py:32
#: appTools/ToolIsolation.py:2927
msgid ""
"Create a Geometry object with\n"
"toolpaths to cut around polygons."
msgstr ""

#: appGUI/ObjectUI.py:349 appGUI/ObjectUI.py:1664 appTools/ToolNCC.py:4251
msgid ""
"Create the Geometry Object\n"
"for non-copper routing."
msgstr ""

#: appGUI/ObjectUI.py:364
msgid ""
"Generate the geometry for\n"
"the board cutout."
msgstr ""

#: appGUI/ObjectUI.py:381 appGUI/preferences/gerber/GerberOptPrefGroupUI.py:32
msgid "Non-copper regions"
msgstr ""

#: appGUI/ObjectUI.py:383 appGUI/preferences/gerber/GerberOptPrefGroupUI.py:34
msgid ""
"Create polygons covering the\n"
"areas without copper on the PCB.\n"
"Equivalent to the inverse of this\n"
"object. Can be used to remove all\n"
"copper from a specified region."
msgstr ""

#: appGUI/ObjectUI.py:393 appGUI/ObjectUI.py:434
#: appGUI/preferences/gerber/GerberOptPrefGroupUI.py:46
#: appGUI/preferences/gerber/GerberOptPrefGroupUI.py:79
msgid "Boundary Margin"
msgstr ""

#: appGUI/ObjectUI.py:395 appGUI/preferences/gerber/GerberOptPrefGroupUI.py:48
msgid ""
"Specify the edge of the PCB\n"
"by drawing a box around all\n"
"objects with this minimum\n"
"distance."
msgstr ""

#: appGUI/ObjectUI.py:412 appGUI/preferences/gerber/GerberOptPrefGroupUI.py:63
msgid "Resulting geometry will have rounded corners."
msgstr ""

#: appGUI/ObjectUI.py:415 appGUI/ObjectUI.py:455 appTools/ToolCutOut.py:2045
#: appTools/ToolCutOut.py:2060 appTools/ToolIsolation.py:3389 appTools/ToolNCC.py:4248
#: appTools/ToolPaint.py:3176
msgid "Generate Geometry"
msgstr ""

#: appGUI/ObjectUI.py:426 appGUI/preferences/gerber/GerberOptPrefGroupUI.py:73
#: appGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:137 appTools/ToolPanelize.py:698
#: appTools/ToolQRCode.py:779
msgid "Bounding Box"
msgstr ""

#: appGUI/ObjectUI.py:428
msgid ""
"Create a geometry surrounding the Gerber object.\n"
"Square shape."
msgstr ""

#: appGUI/ObjectUI.py:436 appGUI/preferences/gerber/GerberOptPrefGroupUI.py:81
msgid ""
"Distance of the edges of the box\n"
"to the nearest polygon."
msgstr ""

#: appGUI/ObjectUI.py:449 appGUI/preferences/gerber/GerberOptPrefGroupUI.py:94
msgid ""
"If the bounding box is \n"
"to have rounded corners\n"
"their radius is equal to\n"
"the margin."
msgstr ""

#: appGUI/ObjectUI.py:458
msgid "Generate the Geometry object."
msgstr ""

#: appGUI/ObjectUI.py:485
msgid "Excellon Object"
msgstr ""

#: appGUI/ObjectUI.py:505
msgid "Solid circles."
msgstr ""

#: appGUI/ObjectUI.py:576 appTools/ToolDrilling.py:2053 appTools/ToolMilling.py:1672
msgid ""
"This is the Tool Number.\n"
"When ToolChange is checked, on toolchange event this value\n"
"will be showed as a T1, T2 ... Tn in the Machine Code.\n"
"\n"
"Here the tools are selected for G-code generation."
msgstr ""

#: appGUI/ObjectUI.py:581 appGUI/ObjectUI.py:871 appTools/ToolDrilling.py:2058
#: appTools/ToolMilling.py:1677 appTools/ToolPaint.py:2826
msgid ""
"Tool Diameter. It's value (in current FlatCAM units) \n"
"is the cut width into the material."
msgstr ""

#: appGUI/ObjectUI.py:584 appTools/ToolDrilling.py:2061 appTools/ToolMilling.py:1680
msgid ""
"The number of Drill holes. Holes that are drilled with\n"
"a drill bit."
msgstr ""

#: appGUI/ObjectUI.py:587 appTools/ToolDrilling.py:2064 appTools/ToolMilling.py:1683
msgid ""
"The number of Slot holes. Holes that are created by\n"
"milling them with an endmill bit."
msgstr ""

#: appGUI/ObjectUI.py:590
msgid "Show the color of the drill holes when using multi-color."
msgstr ""

#: appGUI/ObjectUI.py:592
msgid ""
"Toggle display of the drills for the current tool.\n"
"This does not select the tools for G-code generation."
msgstr ""

#: appGUI/ObjectUI.py:601 appGUI/preferences/excellon/ExcellonAdvOptPrefGroupUI.py:55
msgid "Auto load from DB"
msgstr ""

#: appGUI/ObjectUI.py:603 appGUI/preferences/excellon/ExcellonAdvOptPrefGroupUI.py:57
msgid ""
"Automatic replacement of the tools from related application tools\n"
"with tools from DB that have a close diameter value."
msgstr ""

#: appGUI/ObjectUI.py:613
msgid "Edit an Excellon object."
msgstr ""

#: appGUI/ObjectUI.py:644
msgid "Generate GCode out of drill holes in an Excellon object."
msgstr ""

#: appGUI/ObjectUI.py:655
msgid "Milling Tool"
msgstr ""

#: appGUI/ObjectUI.py:658
msgid "Generate GCode out of slot holes in an Excellon object."
msgstr ""

#: appGUI/ObjectUI.py:682
msgid "Milling Geometry"
msgstr ""

#: appGUI/ObjectUI.py:684
msgid ""
"Create Geometry for milling holes.\n"
"Select from the Tools Table above the hole dias to be\n"
"milled. Use the # column to make the selection."
msgstr ""

#: appGUI/ObjectUI.py:692 appGUI/preferences/excellon/ExcellonOptPrefGroupUI.py:101
msgid "Diameter of the cutting tool."
msgstr ""

#: appGUI/ObjectUI.py:702
msgid "Mill Drills"
msgstr ""

#: appGUI/ObjectUI.py:704
msgid ""
"Create the Geometry Object\n"
"for milling DRILLS toolpaths."
msgstr ""

#: appGUI/ObjectUI.py:722
msgid "Mill Slots"
msgstr ""

#: appGUI/ObjectUI.py:724
msgid ""
"Create the Geometry Object\n"
"for milling SLOTS toolpaths."
msgstr ""

#: appGUI/ObjectUI.py:766
msgid "Geometry Object"
msgstr ""

#: appGUI/ObjectUI.py:828
msgid ""
"Tools in this Geometry object used for cutting.\n"
"The 'Offset' entry will set an offset for the cut.\n"
"'Offset' can be inside, outside, on path (none) and custom.\n"
"'Type' entry is only informative and it allow to know the \n"
"intent of using the current tool. \n"
"It can be Rough(ing), Finish(ing) or Iso(lation).\n"
"The 'Tool type'(TT) can be circular with 1 to 4 teeths(C1..C4),\n"
"ball(B), or V-Shaped(V). \n"
"When V-shaped is selected the 'Type' entry is automatically \n"
"set to Isolation, the CutZ parameter in the UI form is\n"
"grayed out and Cut Z is automatically calculated from the newly \n"
"showed UI form entries named V-Tip Dia and V-Tip Angle."
msgstr ""

#: appGUI/ObjectUI.py:845 appGUI/ObjectUI.py:1817
#: appGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:40
msgid "Plot Object"
msgstr ""

#: appGUI/ObjectUI.py:865
msgid ""
"This is the Tool Number.\n"
"When ToolChange is checked, on toolchange event this value\n"
"will be showed as a T1, T2 ... Tn"
msgstr ""

#: appGUI/ObjectUI.py:876
msgid ""
"The value for the Offset can be:\n"
"- Path -> There is no offset, the tool cut will be done through the geometry line.\n"
"- In(side) -> The tool cut will follow the geometry inside. It will create a 'pocket'.\n"
"- Out(side) -> The tool cut will follow the geometry line on the outside."
msgstr ""

#: appGUI/ObjectUI.py:883
msgid ""
"The (Operation) Type has only informative value. Usually the UI form values \n"
"are choose based on the operation type and this will serve as a reminder.\n"
"Can be 'Roughing', 'Finishing' or 'Isolation'.\n"
"For Roughing we may choose a lower Feedrate and multiDepth cut.\n"
"For Finishing we may choose a higher Feedrate, without multiDepth.\n"
"For Isolation we need a lower Feedrate as it use a milling bit with a fine tip."
msgstr ""

#: appGUI/ObjectUI.py:892
msgid ""
"The Tool Type (TT) can be:\n"
"- Circular with 1 ... 4 teeth -> it is informative only. Being circular the cut width in "
"material\n"
"is exactly the tool diameter.\n"
"- Ball -> informative only and make reference to the Ball type endmill.\n"
"- V-Shape -> it will disable Z-Cut parameter in the UI form and enable two additional UI "
"form\n"
"fields: V-Tip Dia and V-Tip Angle. Adjusting those two values will adjust the Z-Cut "
"parameter such\n"
"as the cut width into material will be equal with the value in the Tool Diameter column "
"of this table.\n"
"Choosing the V-Shape Tool Type automatically will select the Operation Type as Isolation."
msgstr ""

#: appGUI/ObjectUI.py:904
msgid ""
"Plot column. It is visible only for MultiGeo geometries, meaning geometries that holds "
"the geometry\n"
"data into the tools. For those geometries, deleting the tool will delete the geometry "
"data also,\n"
"so be WARNED. From the checkboxes on each row it can be enabled/disabled the plot on "
"canvas\n"
"for the corresponding tool."
msgstr ""

#: appGUI/ObjectUI.py:918
msgid "Edit an Geometry object."
msgstr ""

#: appGUI/ObjectUI.py:937
msgid ""
"The value to offset the cut when \n"
"the Offset type selected is 'Offset'.\n"
"The value can be positive for 'outside'\n"
"cut and negative for 'inside' cut."
msgstr ""

#: appGUI/ObjectUI.py:956 appTools/ToolIsolation.py:776 appTools/ToolNCC.py:449
#: appTools/ToolPaint.py:386 appTools/ToolSolderPaste.py:122
msgid "New Tool"
msgstr ""

#: appGUI/ObjectUI.py:976
msgid ""
"Add a new tool to the Tool Table\n"
"with the diameter specified above."
msgstr ""

#: appGUI/ObjectUI.py:980 appTools/ToolIsolation.py:3049 appTools/ToolNCC.py:66
#: appTools/ToolNCC.py:3854 appTools/ToolPaint.py:140 appTools/ToolPaint.py:2877
msgid "Add from DB"
msgstr ""

#: appGUI/ObjectUI.py:982 appTools/ToolCutOut.py:1845 appTools/ToolIsolation.py:3092
#: appTools/ToolNCC.py:3897 appTools/ToolPaint.py:2911
msgid ""
"Add a new tool to the Tool Table\n"
"from the Tool Database.\n"
"Tool database administration in Menu: Options -> Tools Database"
msgstr ""

#: appGUI/ObjectUI.py:1003
msgid ""
"Copy a selection of tools in the Tool Table\n"
"by first selecting a row in the Tool Table."
msgstr ""

#: appGUI/ObjectUI.py:1010
msgid ""
"Delete a selection of tools in the Tool Table\n"
"by first selecting a row in the Tool Table."
msgstr ""

#: appGUI/ObjectUI.py:1047 appObjects/FlatCAMGeometry.py:388
#: appObjects/FlatCAMGeometry.py:824 appObjects/FlatCAMGeometry.py:829
#: appObjects/FlatCAMGeometry.py:863 appObjects/FlatCAMGeometry.py:888
#: appObjects/FlatCAMGeometry.py:892 appTools/ToolDrilling.py:704
#: appTools/ToolDrilling.py:710 appTools/ToolDrilling.py:753 appTools/ToolDrilling.py:969
#: appTools/ToolDrilling.py:976 appTools/ToolDrilling.py:1007 appTools/ToolDrilling.py:1019
#: appTools/ToolDrilling.py:1023 appTools/ToolDrilling.py:2102 appTools/ToolIsolation.py:525
#: appTools/ToolIsolation.py:633 appTools/ToolIsolation.py:638 appTools/ToolIsolation.py:668
#: appTools/ToolIsolation.py:691 appTools/ToolIsolation.py:704
#: appTools/ToolIsolation.py:3121 appTools/ToolMilling.py:628 appTools/ToolMilling.py:744
#: appTools/ToolMilling.py:749 appTools/ToolMilling.py:779 appTools/ToolMilling.py:790
#: appTools/ToolMilling.py:794 appTools/ToolMilling.py:1711 appTools/ToolNCC.py:266
#: appTools/ToolNCC.py:271 appTools/ToolNCC.py:301 appTools/ToolNCC.py:324
#: appTools/ToolNCC.py:337 appTools/ToolNCC.py:700 appTools/ToolNCC.py:3926
#: appTools/ToolPaint.py:247 appTools/ToolPaint.py:252 appTools/ToolPaint.py:282
#: appTools/ToolPaint.py:304 appTools/ToolPaint.py:316 appTools/ToolPaint.py:654
#: appTools/ToolPaint.py:2938
msgid "Parameters for"
msgstr ""

#: appGUI/ObjectUI.py:1050 appTools/ToolDrilling.py:2105 appTools/ToolIsolation.py:3124
#: appTools/ToolMilling.py:1714 appTools/ToolNCC.py:3929 appTools/ToolPaint.py:2941
msgid ""
"The data used for creating GCode.\n"
"Each tool store it's own set of such data."
msgstr ""

#: appGUI/ObjectUI.py:1057 appGUI/preferences/tools/ToolsISOPrefGroupUI.py:89
#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:72
#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:78
#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:85
msgid "V-Tip Dia"
msgstr ""

#: appGUI/ObjectUI.py:1060 appGUI/preferences/tools/ToolsISOPrefGroupUI.py:91
#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:74
#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:80
msgid "The tip diameter for V-Shape Tool"
msgstr ""

#: appGUI/ObjectUI.py:1072 appGUI/preferences/tools/ToolsISOPrefGroupUI.py:101
#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:84
#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:91
#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:99
msgid "V-Tip Angle"
msgstr ""

#: appGUI/ObjectUI.py:1075 appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:86
#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:93
msgid ""
"The tip angle for V-Shape Tool.\n"
"In degree."
msgstr ""

#: appGUI/ObjectUI.py:1091 appGUI/preferences/geometry/GeometryOptPrefGroupUI.py:51
#: appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:61 appObjects/FlatCAMGeometry.py:1312
#: appTools/ToolCutOut.py:1865
msgid ""
"Cutting depth (negative)\n"
"below the copper surface."
msgstr ""

#: appGUI/ObjectUI.py:1109 appGUI/preferences/geometry/GeometryOptPrefGroupUI.py:69
#: appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:79
#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:77 appTools/ToolCutOut.py:1883
#: appTools/ToolDrilling.py:2150 appTools/ToolMilling.py:1814
msgid "Multi-Depth"
msgstr ""

#: appGUI/ObjectUI.py:1137 appGUI/preferences/geometry/GeometryOptPrefGroupUI.py:104
msgid ""
"Height of the tool when\n"
"moving without cutting."
msgstr ""

#: appGUI/ObjectUI.py:1156 appGUI/preferences/geometry/GeometryOptPrefGroupUI.py:188
#: appTools/ToolMilling.py:1862
msgid ""
"Cutting speed in the XY\n"
"plane in units per minute"
msgstr ""

#: appGUI/ObjectUI.py:1170 appGUI/preferences/geometry/GeometryOptPrefGroupUI.py:203
msgid ""
"Cutting speed in the XY\n"
"plane in units per minute.\n"
"It is called also Plunge."
msgstr ""

#: appGUI/ObjectUI.py:1185 appGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:69
msgid ""
"Cutting speed in the XY plane\n"
"(in units per minute).\n"
"This is for the rapid move G00.\n"
"It is useful only for Marlin,\n"
"ignore for any other cases."
msgstr ""

#: appGUI/ObjectUI.py:1203 appGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:85
#: appTools/ToolMilling.py:1914
msgid "Re-cut"
msgstr ""

#: appGUI/ObjectUI.py:1205 appGUI/ObjectUI.py:1217
#: appGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:87
#: appGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:99 appTools/ToolMilling.py:1916
#: appTools/ToolMilling.py:1929
msgid ""
"In order to remove possible\n"
"copper leftovers where first cut\n"
"meet with last cut, we generate an\n"
"extended cut over the first cut section."
msgstr ""

#: appGUI/ObjectUI.py:1229 appGUI/preferences/geometry/GeometryOptPrefGroupUI.py:220
msgid ""
"Speed of the spindle in RPM (optional).\n"
"If LASER preprocessor is used,\n"
"this value is the power of laser."
msgstr ""

#: appGUI/ObjectUI.py:1245 appGUI/preferences/geometry/GeometryOptPrefGroupUI.py:235
#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:202 appTools/ToolDrilling.py:2252
#: appTools/ToolMilling.py:1959
msgid ""
"Pause to allow the spindle to reach its\n"
"speed before cutting."
msgstr ""

#: appGUI/ObjectUI.py:1255 appGUI/preferences/geometry/GeometryOptPrefGroupUI.py:240
#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:210 appTools/ToolDrilling.py:2264
#: appTools/ToolMilling.py:1970
msgid "Number of time units for spindle to dwell."
msgstr ""

#: appGUI/ObjectUI.py:1263 appGUI/ObjectUI.py:1962
#: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:117
#: appGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:108
#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:333 appTools/ToolDrilling.py:2447
#: appTools/ToolMilling.py:2129
msgid "Probe Z depth"
msgstr ""

#: appGUI/ObjectUI.py:1265 appGUI/ObjectUI.py:1964
#: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:119
#: appGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:110
#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:335 appTools/ToolDrilling.py:2449
#: appTools/ToolMilling.py:2131
msgid ""
"The maximum depth that the probe is allowed\n"
"to probe. Negative value, in current units."
msgstr ""

#: appGUI/ObjectUI.py:1280 appGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:123
#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:346 appTools/ToolDrilling.py:2466
#: appTools/ToolMilling.py:2148
msgid "Feedrate Probe"
msgstr ""

#: appGUI/ObjectUI.py:1282 appGUI/ObjectUI.py:1977
#: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:132
#: appGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:125
#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:348 appTools/ToolDrilling.py:2468
#: appTools/ToolMilling.py:2150
msgid "The feedrate used while the probe is probing."
msgstr ""

#: appGUI/ObjectUI.py:1309 appTools/ToolDrilling.py:2350 appTools/ToolIsolation.py:3220
#: appTools/ToolMilling.py:2042 appTools/ToolNCC.py:4087 appTools/ToolPaint.py:3047
msgid "Apply parameters to all tools"
msgstr ""

#: appGUI/ObjectUI.py:1312 appTools/ToolDrilling.py:2353 appTools/ToolIsolation.py:3223
#: appTools/ToolMilling.py:2045 appTools/ToolNCC.py:4090 appTools/ToolPaint.py:3050
msgid ""
"The parameters in the current form will be applied\n"
"on all the tools from the Tool Table."
msgstr ""

#: appGUI/ObjectUI.py:1323 appTools/ToolDrilling.py:2364 appTools/ToolIsolation.py:3234
#: appTools/ToolMilling.py:2056 appTools/ToolNCC.py:4101 appTools/ToolPaint.py:3061
msgid "Common Parameters"
msgstr ""

#: appGUI/ObjectUI.py:1325 appTools/ToolDrilling.py:2366 appTools/ToolIsolation.py:3236
#: appTools/ToolMilling.py:2058 appTools/ToolNCC.py:4103 appTools/ToolPaint.py:3063
msgid "Parameters that are common for all tools."
msgstr ""

#: appGUI/ObjectUI.py:1330 appTools/ToolDrilling.py:2380 appTools/ToolMilling.py:2063
msgid "Tool change Z"
msgstr ""

#: appGUI/ObjectUI.py:1333 appGUI/preferences/geometry/GeometryOptPrefGroupUI.py:125
msgid ""
"Include tool-change sequence\n"
"in the Machine Code (Pause for tool change)."
msgstr ""

#: appGUI/ObjectUI.py:1341 appGUI/preferences/geometry/GeometryOptPrefGroupUI.py:135
#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:126 appTools/ToolDrilling.py:2382
#: appTools/ToolMilling.py:2072
msgid ""
"Z-axis position (height) for\n"
"tool change."
msgstr ""

#: appGUI/ObjectUI.py:1369 appGUI/preferences/geometry/GeometryOptPrefGroupUI.py:154
#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:142 appTools/ToolDrilling.py:2413
#: appTools/ToolMilling.py:2098
msgid "End move Z"
msgstr ""

#: appGUI/ObjectUI.py:1371 appGUI/preferences/geometry/GeometryOptPrefGroupUI.py:156
#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:144 appTools/ToolDrilling.py:2415
#: appTools/ToolMilling.py:2100
msgid ""
"Height of the tool after\n"
"the last move at the end of the job."
msgstr ""

#: appGUI/ObjectUI.py:1388 appGUI/preferences/geometry/GeometryOptPrefGroupUI.py:174
#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:159 appTools/ToolDrilling.py:2433
#: appTools/ToolMilling.py:2117
msgid "End move X,Y"
msgstr ""

#: appGUI/ObjectUI.py:1390 appGUI/preferences/geometry/GeometryOptPrefGroupUI.py:176
#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:161 appTools/ToolDrilling.py:2435
#: appTools/ToolMilling.py:2119
msgid ""
"End move X,Y position. In format (x,y).\n"
"If no value is entered then there is no move\n"
"on X,Y plane at the end of the job."
msgstr ""

#: appGUI/ObjectUI.py:1395 appTools/ToolDrilling.py:2440 appTools/ToolMilling.py:2124
msgid "X,Y coordinates"
msgstr ""

#: appGUI/ObjectUI.py:1403 appGUI/preferences/geometry/GeometryOptPrefGroupUI.py:257
msgid ""
"The Preprocessor file that dictates\n"
"the Machine Code (like GCode, RML, HPGL) output."
msgstr ""

#: appGUI/ObjectUI.py:1419 appTools/ToolDrilling.py:2501 appTools/ToolMilling.py:2194
msgid "Add exclusion areas"
msgstr ""

#: appGUI/ObjectUI.py:1422 appGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:212
#: appTools/ToolDrilling.py:2504 appTools/ToolMilling.py:2197
msgid ""
"Include exclusion areas.\n"
"In those areas the travel of the tools\n"
"is forbidden."
msgstr ""

#: appGUI/ObjectUI.py:1443 appGUI/ObjectUI.py:1462
#: appGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:232
#: appTools/ToolDrilling.py:2526 appTools/ToolDrilling.py:2545 appTools/ToolMilling.py:2218
#: appTools/ToolMilling.py:2237
msgid "Strategy"
msgstr ""

#: appGUI/ObjectUI.py:1443 appGUI/ObjectUI.py:1474
#: appGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:244
#: appTools/ToolDrilling.py:2526 appTools/ToolDrilling.py:2558 appTools/ToolMilling.py:2218
#: appTools/ToolMilling.py:2249
msgid "Over Z"
msgstr ""

#: appGUI/ObjectUI.py:1445 appTools/ToolDrilling.py:2528 appTools/ToolMilling.py:2220
msgid "This is the Area ID."
msgstr ""

#: appGUI/ObjectUI.py:1447 appTools/ToolDrilling.py:2530 appTools/ToolMilling.py:2222
msgid "Type of the object where the exclusion area was added."
msgstr ""

#: appGUI/ObjectUI.py:1449 appTools/ToolDrilling.py:2532 appTools/ToolMilling.py:2224
msgid "The strategy used for exclusion area. Go around the exclusion areas or over it."
msgstr ""

#: appGUI/ObjectUI.py:1451 appTools/ToolDrilling.py:2534 appTools/ToolMilling.py:2226
msgid ""
"If the strategy is to go over the area then this is the height at which the tool will go "
"to avoid the exclusion area."
msgstr ""

#: appGUI/ObjectUI.py:1463 appGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:233
#: appTools/ToolDrilling.py:2546 appTools/ToolMilling.py:2238
msgid ""
"The strategy followed when encountering an exclusion area.\n"
"Can be:\n"
"- Over -> when encountering the area, the tool will go to a set height\n"
"- Around -> will avoid the exclusion area by going around the area"
msgstr ""

#: appGUI/ObjectUI.py:1467 appGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:237
#: appTools/ToolDrilling.py:2550 appTools/ToolMilling.py:2242
msgid "Over"
msgstr ""

#: appGUI/ObjectUI.py:1468 appGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:238
#: appTools/ToolDrilling.py:2551 appTools/ToolMilling.py:2243
msgid "Around"
msgstr ""

#: appGUI/ObjectUI.py:1475 appGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:245
#: appTools/ToolDrilling.py:2559 appTools/ToolMilling.py:2250
msgid ""
"The height Z to which the tool will rise in order to avoid\n"
"an interdiction area."
msgstr ""

#: appGUI/ObjectUI.py:1485 appTools/ToolDrilling.py:2570 appTools/ToolMilling.py:2260
msgid "Add area:"
msgstr ""

#: appGUI/ObjectUI.py:1486 appTools/ToolDrilling.py:2571 appTools/ToolMilling.py:2261
msgid "Add an Exclusion Area."
msgstr ""

#: appGUI/ObjectUI.py:1492 appGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:222
#: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:295
#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:324
#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:288 appTools/ToolDrilling.py:2577
#: appTools/ToolIsolation.py:3372 appTools/ToolMilling.py:2267 appTools/ToolNCC.py:4231
#: appTools/ToolPaint.py:3163
msgid "The kind of selection shape used for area selection."
msgstr ""

#: appGUI/ObjectUI.py:1502 appGUI/preferences/utilities/AutoCompletePrefGroupUI.py:32
#: appGUI/preferences/utilities/FAExcPrefGroupUI.py:42
#: appGUI/preferences/utilities/FAGcoPrefGroupUI.py:32
#: appGUI/preferences/utilities/FAGrbPrefGroupUI.py:32 appTools/ToolDrilling.py:2588
#: appTools/ToolMilling.py:2277
msgid "Delete All"
msgstr ""

#: appGUI/ObjectUI.py:1503 appTools/ToolDrilling.py:2589 appTools/ToolMilling.py:2278
msgid "Delete all exclusion areas."
msgstr ""

#: appGUI/ObjectUI.py:1506 appTools/ToolDrilling.py:2592 appTools/ToolMilling.py:2281
msgid "Delete Selected"
msgstr ""

#: appGUI/ObjectUI.py:1507 appTools/ToolDrilling.py:2593 appTools/ToolMilling.py:2282
msgid "Delete all exclusion areas that are selected in the table."
msgstr ""

#: appGUI/ObjectUI.py:1517
msgid "Add Polish"
msgstr ""

#: appGUI/ObjectUI.py:1519
msgid ""
"Will add a Paint section at the end of the GCode.\n"
"A metallic brush will clean the material after milling."
msgstr ""

#: appGUI/ObjectUI.py:1527
msgid "Diameter for the polishing tool."
msgstr ""

#: appGUI/ObjectUI.py:1538
msgid "Pressure"
msgstr ""

#: appGUI/ObjectUI.py:1540
msgid ""
"Negative value. The higher the absolute value\n"
"the stronger the pressure of the brush on the material."
msgstr ""

#: appGUI/ObjectUI.py:1569
msgid ""
"Algorithm for polishing:\n"
"- Standard: Fixed step inwards.\n"
"- Seed-based: Outwards from seed.\n"
"- Line-based: Parallel lines."
msgstr ""

#: appGUI/ObjectUI.py:1613 appTools/ToolDrilling.py:2615 appTools/ToolMilling.py:2304
msgid "Generate CNCJob object"
msgstr ""

#: appGUI/ObjectUI.py:1616
msgid "Generate CNCJob object."
msgstr ""

#: appGUI/ObjectUI.py:1618
msgid ""
"Add / Select at least one tool in the tool-table.\n"
"Click the # header to select all, or Ctrl + LMB\n"
"for custom selection of tools."
msgstr ""

#: appGUI/ObjectUI.py:1637
msgid "Launch Paint Tool in Tools Tab."
msgstr ""

#: appGUI/ObjectUI.py:1646 appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:35
msgid ""
"Creates tool paths to cover the\n"
"whole area of a polygon (remove\n"
"all copper). You will be asked\n"
"to click on the desired polygon."
msgstr ""

#: appGUI/ObjectUI.py:1702
msgid "CNC Job Object"
msgstr ""

#: appGUI/ObjectUI.py:1718 appGUI/preferences/cncjob/CNCJobOptPrefGroupUI.py:54
msgid ""
"This selects the kind of geometries on the canvas to plot.\n"
"Those can be either of type 'Travel' which means the moves\n"
"above the work piece or it can be of type 'Cut',\n"
"which means the moves that cut into the material."
msgstr ""

#: appGUI/ObjectUI.py:1727 appGUI/preferences/cncjob/CNCJobOptPrefGroupUI.py:62
msgid "Travel"
msgstr ""

#: appGUI/ObjectUI.py:1746 appGUI/preferences/cncjob/CNCJobOptPrefGroupUI.py:71
msgid "Display Annotation"
msgstr ""

#: appGUI/ObjectUI.py:1748 appGUI/preferences/cncjob/CNCJobOptPrefGroupUI.py:73
msgid ""
"This selects if to display text annotation on the plot.\n"
"When checked it will display numbers in order for each end\n"
"of a travel line."
msgstr ""

#: appGUI/ObjectUI.py:1760 appTools/ToolProperties.py:562
msgid "Travelled distance"
msgstr ""

#: appGUI/ObjectUI.py:1762
msgid ""
"This is the total travelled distance on X-Y plane.\n"
"In current units."
msgstr ""

#: appGUI/ObjectUI.py:1773
msgid "Estimated time"
msgstr ""

#: appGUI/ObjectUI.py:1775
msgid ""
"This is the estimated time to do the routing/drilling,\n"
"without the time spent in ToolChange events."
msgstr ""

#: appGUI/ObjectUI.py:1799
msgid "CNC Tools Table"
msgstr ""

#: appGUI/ObjectUI.py:1802
msgid ""
"Tools in this CNCJob object used for cutting.\n"
"The tool diameter is used for plotting on canvas.\n"
"The 'Offset' entry will set an offset for the cut.\n"
"'Offset' can be inside, outside, on path (none) and custom.\n"
"'Type' entry is only informative and it allow to know the \n"
"intent of using the current tool. \n"
"It can be Rough(ing), Finish(ing) or Iso(lation).\n"
"The 'Tool type'(TT) can be circular with 1 to 4 teeths(C1..C4),\n"
"ball(B), or V-Shaped(V)."
msgstr ""

#: appGUI/ObjectUI.py:1830 appGUI/ObjectUI.py:1841
msgid "P"
msgstr ""

#: appGUI/ObjectUI.py:1851
msgid "Update Plot"
msgstr ""

#: appGUI/ObjectUI.py:1853
msgid "Update the plot."
msgstr ""

#: appGUI/ObjectUI.py:1862
msgid "Edit an GCode object."
msgstr ""

#: appGUI/ObjectUI.py:1878
msgid "Use CNC Code Snippets"
msgstr ""

#: appGUI/ObjectUI.py:1880
msgid ""
"When selected, it will include CNC Code snippets (append and prepend)\n"
"defined in the Preferences."
msgstr ""

#: appGUI/ObjectUI.py:1886 appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:64
msgid "Autolevelling"
msgstr ""

#: appGUI/ObjectUI.py:1888
msgid "Enable the autolevelling feature."
msgstr ""

#: appGUI/ObjectUI.py:1905
msgid "Probe Points Table"
msgstr ""

#: appGUI/ObjectUI.py:1906
msgid "Generate GCode that will obtain the height map"
msgstr ""

#: appGUI/ObjectUI.py:1908
msgid "Show"
msgstr ""

#: appGUI/ObjectUI.py:1909
msgid "Toggle the display of the Probe Points table."
msgstr ""

#: appGUI/ObjectUI.py:1922
msgid "X-Y Coordinates"
msgstr ""

#: appGUI/ObjectUI.py:1922
msgid "Height"
msgstr ""

#: appGUI/ObjectUI.py:1926
msgid "Show Voronoi diagram"
msgstr ""

#: appGUI/ObjectUI.py:1928
msgid "Display Voronoi diagram if there are probe points in the table."
msgstr ""

#: appGUI/ObjectUI.py:1941
msgid "Probe GCode Generation"
msgstr ""

#: appGUI/ObjectUI.py:1943
msgid ""
"Will create a GCode which will be sent to the controller,\n"
"either through a file or directly, with the intent to get the height map\n"
"that is to modify the original GCode to level the cutting height."
msgstr ""

#: appGUI/ObjectUI.py:1950 appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:105
msgid "Probe Z travel"
msgstr ""

#: appGUI/ObjectUI.py:1952 appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:107
msgid "The safe Z for probe travelling between probe points."
msgstr ""

#: appGUI/ObjectUI.py:1975 appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:130
msgid "Probe Feedrate"
msgstr ""

#: appGUI/ObjectUI.py:1991 appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:71
msgid "Mode"
msgstr ""

#: appGUI/ObjectUI.py:1992 appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:72
msgid ""
"Choose a mode for height map generation.\n"
"- Manual: will pick a selection of probe points by clicking on canvas\n"
"- Grid: will automatically generate a grid of probe points"
msgstr ""

#: appGUI/ObjectUI.py:1998 appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:78
#: appGUI/preferences/tools/Tools2FiducialsPrefGroupUI.py:74 appTools/ToolCutOut.py:2082
#: appTools/ToolFiducials.py:801
msgid "Manual"
msgstr ""

#: appGUI/ObjectUI.py:1999 appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:79
msgid "Grid"
msgstr ""

#: appGUI/ObjectUI.py:2007 appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:87
#: appGUI/preferences/tools/ToolsPanelizePrefGroupUI.py:77 appTools/ToolPanelize.py:787
msgid "Columns"
msgstr ""

#: appGUI/ObjectUI.py:2009 appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:89
msgid "The number of grid columns."
msgstr ""

#: appGUI/ObjectUI.py:2017 appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:97
#: appGUI/preferences/tools/ToolsPanelizePrefGroupUI.py:89 appTools/ToolPanelize.py:797
msgid "Rows"
msgstr ""

#: appGUI/ObjectUI.py:2019 appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:99
msgid "The number of gird rows."
msgstr ""

#: appGUI/ObjectUI.py:2024
msgid "Add Probe Points"
msgstr ""

#: appGUI/ObjectUI.py:2032 appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:146
msgid "Controller"
msgstr ""

#: appGUI/ObjectUI.py:2034 appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:148
msgid ""
"The kind of controller for which to generate\n"
"height map gcode."
msgstr ""

#: appGUI/ObjectUI.py:2080 appGUI/ObjectUI.py:2095 appObjects/FlatCAMCNCJob.py:1159
#: appObjects/FlatCAMCNCJob.py:1181
msgid "Control"
msgstr ""

#: appGUI/ObjectUI.py:2090 appGUI/ObjectUI.py:2097 appObjects/FlatCAMCNCJob.py:1161
#: appObjects/FlatCAMCNCJob.py:1183
msgid "Sender"
msgstr ""

#: appGUI/ObjectUI.py:2111
msgid "COM list"
msgstr ""

#: appGUI/ObjectUI.py:2113 appGUI/ObjectUI.py:2128
msgid "Lists the available serial ports."
msgstr ""

#: appGUI/ObjectUI.py:2117
msgid "Search"
msgstr ""

#: appGUI/ObjectUI.py:2119
msgid "Search for the available serial ports."
msgstr ""

#: appGUI/ObjectUI.py:2126
msgid "Baud rates"
msgstr ""

#: appGUI/ObjectUI.py:2145
msgid "New, custom baudrate."
msgstr ""

#: appGUI/ObjectUI.py:2153
msgid "Add the specified custom baudrate to the list."
msgstr ""

#: appGUI/ObjectUI.py:2159
msgid "Delete selected baudrate"
msgstr ""

#: appGUI/ObjectUI.py:2163
msgid "Reset"
msgstr ""

#: appGUI/ObjectUI.py:2165
msgid "Software reset of the controller."
msgstr ""

#: appGUI/ObjectUI.py:2171 appObjects/FlatCAMCNCJob.py:1175
msgid "Disconnected"
msgstr ""

#: appGUI/ObjectUI.py:2173
msgid "Connect to the selected port with the selected baud rate."
msgstr ""

#: appGUI/ObjectUI.py:2198
msgid "Jog"
msgstr ""

#: appGUI/ObjectUI.py:2206
msgid "Zero Axes"
msgstr ""

#: appGUI/ObjectUI.py:2239
msgid "Pause/Resume"
msgstr ""

#: appGUI/ObjectUI.py:2261 appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:158
msgid "Step"
msgstr ""

#: appGUI/ObjectUI.py:2263 appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:160
msgid "Each jog action will move the axes with this value."
msgstr ""

#: appGUI/ObjectUI.py:2275 appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:171
#: appGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:89 appTools/ToolProperties.py:529
msgid "Feedrate"
msgstr ""

#: appGUI/ObjectUI.py:2277 appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:173
msgid "Feedrate when jogging."
msgstr ""

#: appGUI/ObjectUI.py:2297
msgid "Send Command"
msgstr ""

#: appGUI/ObjectUI.py:2299 appGUI/ObjectUI.py:2309
msgid "Send a custom command to GRBL."
msgstr ""

#: appGUI/ObjectUI.py:2304
msgid "Type GRBL command ..."
msgstr ""

#: appGUI/ObjectUI.py:2307
msgid "Send"
msgstr ""

#: appGUI/ObjectUI.py:2315
msgid "Get Config parameter"
msgstr ""

#: appGUI/ObjectUI.py:2317
msgid "A GRBL configuration parameter."
msgstr ""

#: appGUI/ObjectUI.py:2322
msgid "Type GRBL parameter ..."
msgstr ""

#: appGUI/ObjectUI.py:2325
msgid "Get"
msgstr ""

#: appGUI/ObjectUI.py:2327
msgid "Get the value of a specified GRBL parameter."
msgstr ""

#: appGUI/ObjectUI.py:2335
msgid "Get Report"
msgstr ""

#: appGUI/ObjectUI.py:2337
msgid "Print in shell the GRBL report."
msgstr ""

#: appGUI/ObjectUI.py:2342
msgid "Apply AutoLevelling"
msgstr ""

#: appGUI/ObjectUI.py:2344
msgid ""
"Will send the probing GCode to the GRBL controller,\n"
"wait for the Z probing data and then apply this data\n"
"over the original GCode therefore doing autolevelling."
msgstr ""

#: appGUI/ObjectUI.py:2354
msgid "Save Probing GCode"
msgstr ""

#: appGUI/ObjectUI.py:2362
msgid "View/Edit the probing GCode."
msgstr ""

#: appGUI/ObjectUI.py:2369 appObjects/FlatCAMCNCJob.py:1579 appObjects/FlatCAMCNCJob.py:1583
msgid "Import Height Map"
msgstr ""

#: appGUI/ObjectUI.py:2371
msgid ""
"Import the file that has the Z heights\n"
"obtained through probing and then apply this data\n"
"over the original GCode therefore\n"
"doing autolevelling."
msgstr ""

#: appGUI/ObjectUI.py:2389
msgid "Export CNC Code"
msgstr ""

#: appGUI/ObjectUI.py:2391 appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:37
#: appGUI/preferences/cncjob/CNCJobOptPrefGroupUI.py:33
msgid ""
"Export and save G-Code to\n"
"make this object to a file."
msgstr ""

#: appGUI/ObjectUI.py:2400
msgid "Save CNC Code"
msgstr ""

#: appGUI/ObjectUI.py:2403
msgid ""
"Opens dialog to save G-Code\n"
"file."
msgstr ""

#: appGUI/ObjectUI.py:2410
msgid "Review CNC Code."
msgstr ""

#: appGUI/ObjectUI.py:2464
msgid "Script Object"
msgstr ""

#: appGUI/ObjectUI.py:2484 appGUI/ObjectUI.py:2558
msgid "Auto Completer"
msgstr ""

#: appGUI/ObjectUI.py:2486
msgid "This selects if the auto completer is enabled in the Script Editor."
msgstr ""

#: appGUI/ObjectUI.py:2531
msgid "Document Object"
msgstr ""

#: appGUI/ObjectUI.py:2560
msgid "This selects if the auto completer is enabled in the Document Editor."
msgstr ""

#: appGUI/ObjectUI.py:2578
msgid "Font Type"
msgstr ""

#: appGUI/ObjectUI.py:2595 appGUI/preferences/general/GeneralAPPSetGroupUI.py:189
msgid "Font Size"
msgstr ""

#: appGUI/ObjectUI.py:2631
msgid "Alignment"
msgstr ""

#: appGUI/ObjectUI.py:2636
msgid "Align Left"
msgstr ""

#: appGUI/ObjectUI.py:2641 app_Main.py:4993
msgid "Center"
msgstr ""

#: appGUI/ObjectUI.py:2646
msgid "Align Right"
msgstr ""

#: appGUI/ObjectUI.py:2651
msgid "Justify"
msgstr ""

#: appGUI/ObjectUI.py:2658
msgid "Font Color"
msgstr ""

#: appGUI/ObjectUI.py:2660
msgid "Set the font color for the selected text"
msgstr ""

#: appGUI/ObjectUI.py:2674
msgid "Selection Color"
msgstr ""

#: appGUI/ObjectUI.py:2676
msgid "Set the selection color when doing text selection."
msgstr ""

#: appGUI/ObjectUI.py:2690
msgid "Tab Size"
msgstr ""

#: appGUI/ObjectUI.py:2692
msgid "Set the tab size. In pixels. Default value is 80 pixels."
msgstr ""

#: appGUI/PlotCanvas.py:236 appGUI/PlotCanvasLegacy.py:345
msgid "Axis enabled."
msgstr ""

#: appGUI/PlotCanvas.py:242 appGUI/PlotCanvasLegacy.py:352
msgid "Axis disabled."
msgstr ""

#: appGUI/PlotCanvas.py:260 appGUI/PlotCanvasLegacy.py:372
msgid "HUD enabled."
msgstr ""

#: appGUI/PlotCanvas.py:268 appGUI/PlotCanvasLegacy.py:378
msgid "HUD disabled."
msgstr ""

#: appGUI/PlotCanvas.py:276 appGUI/PlotCanvasLegacy.py:451
msgid "Grid enabled."
msgstr ""

#: appGUI/PlotCanvas.py:280 appGUI/PlotCanvasLegacy.py:459
msgid "Grid disabled."
msgstr ""

#: appGUI/PlotCanvasLegacy.py:1530
msgid ""
"Could not annotate due of a difference between the number of text elements and the number "
"of text positions."
msgstr ""

#: appGUI/preferences/PreferencesUIManager.py:896
msgid "Preferences applied."
msgstr ""

#: appGUI/preferences/PreferencesUIManager.py:916
msgid "Are you sure you want to continue?"
msgstr ""

#: appGUI/preferences/PreferencesUIManager.py:917
msgid "Application will restart"
msgstr ""

#: appGUI/preferences/PreferencesUIManager.py:1015
msgid "Preferences closed without saving."
msgstr ""

#: appGUI/preferences/PreferencesUIManager.py:1027
msgid "Preferences default values are restored."
msgstr ""

#: appGUI/preferences/PreferencesUIManager.py:1058 app_Main.py:2622 app_Main.py:2690
msgid "Failed to write defaults to file."
msgstr ""

#: appGUI/preferences/PreferencesUIManager.py:1062
#: appGUI/preferences/PreferencesUIManager.py:1176
msgid "Preferences saved."
msgstr ""

#: appGUI/preferences/PreferencesUIManager.py:1112
msgid "Preferences edited but not saved."
msgstr ""

#: appGUI/preferences/PreferencesUIManager.py:1161
msgid ""
"One or more values are changed.\n"
"Do you want to save the Preferences?"
msgstr ""

#: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:27
msgid "CNC Job Adv. Options"
msgstr ""

#: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:35
#: appGUI/preferences/cncjob/CNCJobEditorPrefGroupUI.py:31
#: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:30
#: appGUI/preferences/geometry/GeometryEditorPrefGroupUI.py:31
#: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:31
#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:37
#: appGUI/preferences/tools/Tools2CalPrefGroupUI.py:36
#: appGUI/preferences/tools/Tools2EDrillsPrefGroupUI.py:36
#: appGUI/preferences/tools/Tools2FiducialsPrefGroupUI.py:36
#: appGUI/preferences/tools/Tools2InvertPrefGroupUI.py:31
#: appGUI/preferences/tools/Tools2OptimalPrefGroupUI.py:31
#: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:36
#: appGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:31
#: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:30
#: appGUI/preferences/tools/Tools2sidedPrefGroupUI.py:31
#: appGUI/preferences/tools/ToolsCornersPrefGroupUI.py:35
#: appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:32
#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:31
#: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:31
#: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:30
#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:31
#: appGUI/preferences/tools/ToolsPanelizePrefGroupUI.py:31
#: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:31
#: appGUI/preferences/tools/ToolsSubPrefGroupUI.py:31
#: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:31 appTools/ToolCalibration.py:762
#: appTools/ToolCopperThieving.py:1182 appTools/ToolCorners.py:377
#: appTools/ToolEtchCompensation.py:356 appTools/ToolFiducials.py:763
#: appTools/ToolInvertGerber.py:228 appTools/ToolQRCode.py:692
msgid "Parameters"
msgstr ""

#: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:43
msgid "Annotation Size"
msgstr ""

#: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:45
msgid "The font size of the annotation text. In pixels."
msgstr ""

#: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:54
msgid "Annotation Color"
msgstr ""

#: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:56
msgid "Set the font color for the annotation texts."
msgstr ""

#: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:66
msgid "Parameters for the autolevelling."
msgstr ""

#: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:186
msgid "Safe height (Z) distance when jogging to origin."
msgstr ""

#: appGUI/preferences/cncjob/CNCJobEditorPrefGroupUI.py:27
msgid "CNC Job Editor"
msgstr ""

#: appGUI/preferences/cncjob/CNCJobEditorPrefGroupUI.py:33
#: appGUI/preferences/geometry/GeometryEditorPrefGroupUI.py:33
msgid "A list of Editor parameters."
msgstr ""

#: appGUI/preferences/cncjob/CNCJobEditorPrefGroupUI.py:46
msgid "Prepend to G-Code"
msgstr ""

#: appGUI/preferences/cncjob/CNCJobEditorPrefGroupUI.py:48
msgid ""
"Type here any G-Code commands you would\n"
"like to add at the beginning of the G-Code file."
msgstr ""

#: appGUI/preferences/cncjob/CNCJobEditorPrefGroupUI.py:55
msgid ""
"Type here any G-Code commands you would like to add at the beginning of the G-Code file."
msgstr ""

#: appGUI/preferences/cncjob/CNCJobEditorPrefGroupUI.py:62
msgid "Append to G-Code"
msgstr ""

#: appGUI/preferences/cncjob/CNCJobEditorPrefGroupUI.py:64
msgid ""
"Type here any G-Code commands you would\n"
"like to append to the generated file.\n"
"I.e.: M2 (End of program)"
msgstr ""

#: appGUI/preferences/cncjob/CNCJobEditorPrefGroupUI.py:72
msgid ""
"Type here any G-Code commands you would like to append to the generated file.\n"
"I.e.: M2 (End of program)"
msgstr ""

#: appGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:26
msgid "CNC Job General"
msgstr ""

#: appGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:47
#: appGUI/preferences/geometry/GeometryGenPrefGroupUI.py:59
#: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:59
#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:45
msgid "Circle Steps"
msgstr ""

#: appGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:49
msgid ""
"The number of circle steps for <b>GCode</b> \n"
"circle and arc shapes linear approximation."
msgstr ""

#: appGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:58
msgid "Travel dia"
msgstr ""

#: appGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:60
msgid ""
"The width of the travel lines to be\n"
"rendered in the plot."
msgstr ""

#: appGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:73
msgid "G-code Decimals"
msgstr ""

#: appGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:76 appTools/ToolFiducials.py:682
msgid "Coordinates"
msgstr ""

#: appGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:78
msgid ""
"The number of decimals to be used for \n"
"the X, Y, Z coordinates in CNC code (GCODE, etc.)"
msgstr ""

#: appGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:91
msgid ""
"The number of decimals to be used for \n"
"the Feedrate parameter in CNC code (GCODE, etc.)"
msgstr ""

#: appGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:102
msgid "Coordinates type"
msgstr ""

#: appGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:104
msgid ""
"The type of coordinates to be used in Gcode.\n"
"Can be:\n"
"- Absolute G90 -> the reference is the origin x=0, y=0\n"
"- Incremental G91 -> the reference is the previous position"
msgstr ""

#: appGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:110
msgid "Absolute G90"
msgstr ""

#: appGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:111
msgid "Incremental G91"
msgstr ""

#: appGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:121
msgid "Force Windows style line-ending"
msgstr ""

#: appGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:123
msgid ""
"When checked will force a Windows style line-ending\n"
"(\\r\\n) on non-Windows OS's."
msgstr ""

#: appGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:135
msgid "Travel Line Color"
msgstr ""

#: appGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:139
#: appGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:180
#: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:275
#: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:154
#: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:195
#: appGUI/preferences/geometry/GeometryGenPrefGroupUI.py:158
#: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:169 appTools/ToolRulesCheck.py:1288
msgid "Outline"
msgstr ""

#: appGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:141
msgid "Set the travel line color for plotted objects."
msgstr ""

#: appGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:149
#: appGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:190
#: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:285
#: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:163
#: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:205
#: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:179
msgid "Fill"
msgstr ""

#: appGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:151
#: appGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:192
#: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:287
#: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:181
msgid ""
"Set the fill color for plotted objects.\n"
"First 6 digits are the color and the last 2\n"
"digits are for alpha (transparency) level."
msgstr ""

#: appGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:161
#: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:297
#: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:176
#: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:218
#: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:191
msgid "Alpha"
msgstr ""

#: appGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:163
#: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:299
#: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:193
msgid "Set the fill transparency for plotted objects."
msgstr ""

#: appGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:176
#: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:271
#: appGUI/preferences/geometry/GeometryGenPrefGroupUI.py:154
#: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:165
msgid "Object Color"
msgstr ""

#: appGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:182
msgid "Set the color for plotted objects."
msgstr ""

#: appGUI/preferences/cncjob/CNCJobOptPrefGroupUI.py:27
msgid "CNC Job Options"
msgstr ""

#: appGUI/preferences/cncjob/CNCJobOptPrefGroupUI.py:31
msgid "Export G-Code"
msgstr ""

#: appGUI/preferences/cncjob/CNCJobOptPrefGroupUI.py:52
msgid "Plot kind"
msgstr ""

#: appGUI/preferences/excellon/ExcellonAdvOptPrefGroupUI.py:27
msgid "Excellon Adv. Options"
msgstr ""

#: appGUI/preferences/excellon/ExcellonAdvOptPrefGroupUI.py:34
#: appGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:34
#: appGUI/preferences/gerber/GerberAdvOptPrefGroupUI.py:31
#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:276
msgid "Advanced Options"
msgstr ""

#: appGUI/preferences/excellon/ExcellonAdvOptPrefGroupUI.py:36
msgid ""
"A list of Excellon advanced parameters.\n"
"Those parameters are available only for\n"
"Advanced App. Level."
msgstr ""

#: appGUI/preferences/excellon/ExcellonAdvOptPrefGroupUI.py:48
#: appGUI/preferences/gerber/GerberAdvOptPrefGroupUI.py:52
msgid "Table Show/Hide"
msgstr ""

#: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:32
msgid "A list of Excellon Editor parameters."
msgstr ""

#: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:40
#: appGUI/preferences/geometry/GeometryEditorPrefGroupUI.py:41
#: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:41
#: appGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:172
msgid "Selection limit"
msgstr ""

#: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:42
msgid ""
"Set the number of selected Excellon geometry\n"
"items above which the utility geometry\n"
"becomes just a selection rectangle.\n"
"Increases the performance when moving a\n"
"large number of geometric elements."
msgstr ""

#: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:55
#: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:134
#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:117
#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:123
msgid "New Dia"
msgstr ""

#: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:80
msgid "Linear Drill Array"
msgstr ""

#: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:84
#: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:232
#: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:121
msgid "Linear Direction"
msgstr ""

#: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:126
msgid "Circular Drill Array"
msgstr ""

#: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:130
#: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:280
#: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:165
msgid "Circular Direction"
msgstr ""

#: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:132
#: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:282
#: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:167
msgid ""
"Direction for circular array.\n"
"Can be CW = clockwise or CCW = counter clockwise."
msgstr ""

#: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:143
#: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:293
#: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:178
msgid "Circular Angle"
msgstr ""

#: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:196
msgid ""
"Angle at which the slot is placed.\n"
"The precision is of max 2 decimals.\n"
"Min value is: -359.99 degrees.\n"
"Max value is:  360.00 degrees."
msgstr ""

#: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:215
msgid "Linear Slot Array"
msgstr ""

#: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:276
msgid "Circular Slot Array"
msgstr ""

#: appGUI/preferences/excellon/ExcellonExpPrefGroupUI.py:26
msgid "Excellon Export"
msgstr ""

#: appGUI/preferences/excellon/ExcellonExpPrefGroupUI.py:30
#: appGUI/preferences/gerber/GerberExpPrefGroupUI.py:31
msgid "Export Options"
msgstr ""

#: appGUI/preferences/excellon/ExcellonExpPrefGroupUI.py:32
msgid ""
"The parameters set here are used in the file exported\n"
"when using the File -> Export -> Export Excellon menu entry."
msgstr ""

#: appGUI/preferences/excellon/ExcellonExpPrefGroupUI.py:41
#: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:172
#: appGUI/preferences/general/GeneralAppPrefGroupUI.py:39
#: appGUI/preferences/gerber/GerberExpPrefGroupUI.py:42
#: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:82 appTools/ToolDistance.py:562
#: appTools/ToolDistanceMin.py:237 appTools/ToolPcbWizard.py:455
#: appTools/ToolProperties.py:157
msgid "Units"
msgstr ""

#: appGUI/preferences/excellon/ExcellonExpPrefGroupUI.py:43
#: appGUI/preferences/excellon/ExcellonExpPrefGroupUI.py:49
msgid "The units used in the Excellon file."
msgstr ""

#: appGUI/preferences/excellon/ExcellonExpPrefGroupUI.py:46
#: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:96
#: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:182
#: appGUI/preferences/gerber/GerberExpPrefGroupUI.py:47
#: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:87 appTools/ToolCalculators.py:187
#: appTools/ToolPcbWizard.py:453
msgid "INCH"
msgstr ""

#: appGUI/preferences/excellon/ExcellonExpPrefGroupUI.py:47
#: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:183
#: appGUI/preferences/general/GeneralAppPrefGroupUI.py:43
#: appGUI/preferences/gerber/GerberExpPrefGroupUI.py:48
#: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:88 appTools/ToolCalculators.py:188
#: appTools/ToolPcbWizard.py:454
msgid "MM"
msgstr ""

#: appGUI/preferences/excellon/ExcellonExpPrefGroupUI.py:55
#: appGUI/preferences/gerber/GerberExpPrefGroupUI.py:56
msgid "Int/Decimals"
msgstr ""

#: appGUI/preferences/excellon/ExcellonExpPrefGroupUI.py:57
msgid ""
"The NC drill files, usually named Excellon files\n"
"are files that can be found in different formats.\n"
"Here we set the format used when the provided\n"
"coordinates are not using period."
msgstr ""

#: appGUI/preferences/excellon/ExcellonExpPrefGroupUI.py:69
#: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:104
#: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:133
msgid ""
"This numbers signify the number of digits in\n"
"the whole part of Excellon coordinates."
msgstr ""

#: appGUI/preferences/excellon/ExcellonExpPrefGroupUI.py:82
#: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:117
#: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:146
msgid ""
"This numbers signify the number of digits in\n"
"the decimal part of Excellon coordinates."
msgstr ""

#: appGUI/preferences/excellon/ExcellonExpPrefGroupUI.py:91
msgid "Format"
msgstr ""

#: appGUI/preferences/excellon/ExcellonExpPrefGroupUI.py:93
#: appGUI/preferences/excellon/ExcellonExpPrefGroupUI.py:103
msgid ""
"Select the kind of coordinates format used.\n"
"Coordinates can be saved with decimal point or without.\n"
"When there is no decimal point, it is required to specify\n"
"the number of digits for integer part and the number of decimals.\n"
"Also it will have to be specified if LZ = leading zeros are kept\n"
"or TZ = trailing zeros are kept."
msgstr ""

#: appGUI/preferences/excellon/ExcellonExpPrefGroupUI.py:100
msgid "Decimal"
msgstr ""

#: appGUI/preferences/excellon/ExcellonExpPrefGroupUI.py:101
msgid "No-Decimal"
msgstr ""

#: appGUI/preferences/excellon/ExcellonExpPrefGroupUI.py:114
#: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:154
#: appGUI/preferences/gerber/GerberExpPrefGroupUI.py:96
#: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:97
msgid "Zeros"
msgstr ""

#: appGUI/preferences/excellon/ExcellonExpPrefGroupUI.py:117
msgid ""
"This sets the type of Excellon zeros.\n"
"If LZ then Leading Zeros are kept and\n"
"Trailing Zeros are removed.\n"
"If TZ is checked then Trailing Zeros are kept\n"
"and Leading Zeros are removed."
msgstr ""

#: appGUI/preferences/excellon/ExcellonExpPrefGroupUI.py:124
#: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:167
#: appGUI/preferences/gerber/GerberExpPrefGroupUI.py:106
#: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:107 appTools/ToolPcbWizard.py:439
msgid "LZ"
msgstr ""

#: appGUI/preferences/excellon/ExcellonExpPrefGroupUI.py:125
#: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:168
#: appGUI/preferences/gerber/GerberExpPrefGroupUI.py:107
#: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:108 appTools/ToolPcbWizard.py:440
msgid "TZ"
msgstr ""

#: appGUI/preferences/excellon/ExcellonExpPrefGroupUI.py:127
msgid ""
"This sets the default type of Excellon zeros.\n"
"If LZ then Leading Zeros are kept and\n"
"Trailing Zeros are removed.\n"
"If TZ is checked then Trailing Zeros are kept\n"
"and Leading Zeros are removed."
msgstr ""

#: appGUI/preferences/excellon/ExcellonExpPrefGroupUI.py:137
msgid "Slot type"
msgstr ""

#: appGUI/preferences/excellon/ExcellonExpPrefGroupUI.py:140
#: appGUI/preferences/excellon/ExcellonExpPrefGroupUI.py:150
msgid ""
"This sets how the slots will be exported.\n"
"If ROUTED then the slots will be routed\n"
"using M15/M16 commands.\n"
"If DRILLED(G85) the slots will be exported\n"
"using the Drilled slot command (G85)."
msgstr ""

#: appGUI/preferences/excellon/ExcellonExpPrefGroupUI.py:147
msgid "Routed"
msgstr ""

#: appGUI/preferences/excellon/ExcellonExpPrefGroupUI.py:148
msgid "Drilled(G85)"
msgstr ""

#: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:29
msgid "Excellon General"
msgstr ""

#: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:54
#: appGUI/preferences/geometry/GeometryGenPrefGroupUI.py:47
#: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:52
msgid "M-Color"
msgstr ""

#: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:71
msgid "Excellon Format"
msgstr ""

#: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:73
msgid ""
"The NC drill files, usually named Excellon files\n"
"are files that can be found in different formats.\n"
"Here we set the format used when the provided\n"
"coordinates are not using period.\n"
"\n"
"Possible presets:\n"
"\n"
"PROTEUS 3:3 MM LZ\n"
"DipTrace 5:2 MM TZ\n"
"DipTrace 4:3 MM LZ\n"
"\n"
"EAGLE 3:3 MM TZ\n"
"EAGLE 4:3 MM TZ\n"
"EAGLE 2:5 INCH TZ\n"
"EAGLE 3:5 INCH TZ\n"
"\n"
"ALTIUM 2:4 INCH LZ\n"
"Sprint Layout 2:4 INCH LZ\n"
"KiCAD 3:5 INCH TZ"
msgstr ""

#: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:97
msgid "Default values for INCH are 2:4"
msgstr ""

#: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:125
msgid "METRIC"
msgstr ""

#: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:126
msgid "Default values for METRIC are 3:3"
msgstr ""

#: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:157
msgid ""
"This sets the type of Excellon zeros.\n"
"If LZ then Leading Zeros are kept and\n"
"Trailing Zeros are removed.\n"
"If TZ is checked then Trailing Zeros are kept\n"
"and Leading Zeros are removed.\n"
"\n"
"This is used when there is no information\n"
"stored in the Excellon file."
msgstr ""

#: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:175
msgid ""
"This sets the default units of Excellon files.\n"
"If it is not detected in the parsed file the value here\n"
"will be used.Some Excellon files don't have an header\n"
"therefore this parameter will be used."
msgstr ""

#: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:185
msgid ""
"This sets the units of Excellon files.\n"
"Some Excellon files don't have an header\n"
"therefore this parameter will be used."
msgstr ""

#: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:193
msgid "Update Export settings"
msgstr ""

#: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:210
#: appGUI/preferences/geometry/GeometryGenPrefGroupUI.py:91
#: appGUI/preferences/tools/ToolsPanelizePrefGroupUI.py:110 appTools/ToolPanelize.py:821
msgid "Path Optimization"
msgstr ""

#: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:213
#: appGUI/preferences/geometry/GeometryGenPrefGroupUI.py:94
msgid "Algorithm:"
msgstr ""

#: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:215
msgid ""
"This sets the optimization type for the Excellon drill path.\n"
"If <<MetaHeuristic>> is checked then Google OR-Tools algorithm with\n"
"MetaHeuristic Guided Local Path is used. Default search time is 3sec.\n"
"If <<Basic>> is checked then Google OR-Tools Basic algorithm is used.\n"
"If <<TSA>> is checked then Travelling Salesman algorithm is used for\n"
"drill path optimization.\n"
"\n"
"Some options are disabled when FlatCAM works in 32bit mode."
msgstr ""

#: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:225
#: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:310
#: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:314
#: appGUI/preferences/geometry/GeometryGenPrefGroupUI.py:109
#: appGUI/preferences/geometry/GeometryGenPrefGroupUI.py:171
#: appGUI/preferences/geometry/GeometryGenPrefGroupUI.py:175
msgid "MetaHeuristic"
msgstr ""

#: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:226
#: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:310
#: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:314
#: appGUI/preferences/general/GeneralAppPrefGroupUI.py:104
#: appGUI/preferences/geometry/GeometryGenPrefGroupUI.py:110
#: appGUI/preferences/geometry/GeometryGenPrefGroupUI.py:171
#: appGUI/preferences/geometry/GeometryGenPrefGroupUI.py:175
#: appObjects/FlatCAMExcellon.py:154 appObjects/FlatCAMGeometry.py:560
#: appObjects/FlatCAMGerber.py:167 appTools/ToolDrilling.py:305
#: appTools/ToolIsolation.py:241 appTools/ToolMilling.py:294
msgid "Basic"
msgstr ""

#: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:227
#: appGUI/preferences/geometry/GeometryGenPrefGroupUI.py:111
msgid "TSA"
msgstr ""

#: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:233
#: appGUI/preferences/geometry/GeometryGenPrefGroupUI.py:117
#: appGUI/preferences/geometry/GeometryOptPrefGroupUI.py:238
#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:209
msgid "Duration"
msgstr ""

#: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:236
#: appGUI/preferences/geometry/GeometryGenPrefGroupUI.py:119
msgid ""
"When OR-Tools Metaheuristic (MH) is enabled there is a\n"
"maximum threshold for how much time is spent doing the\n"
"path optimization. This max duration is set here.\n"
"In seconds."
msgstr ""

#: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:255
#: appGUI/preferences/geometry/GeometryGenPrefGroupUI.py:138
msgid "Join Option"
msgstr ""

#: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:258
#: appGUI/preferences/geometry/GeometryGenPrefGroupUI.py:141
msgid "Fuse Tools"
msgstr ""

#: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:260
#: appGUI/preferences/geometry/GeometryGenPrefGroupUI.py:143
msgid ""
"When checked the joined (merged) object tools\n"
"will be merged also but only if they share some of their attributes."
msgstr ""

#: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:277
#: appGUI/preferences/geometry/GeometryGenPrefGroupUI.py:160
#: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:171
msgid "Set the line color for plotted objects."
msgstr ""

#: appGUI/preferences/excellon/ExcellonOptPrefGroupUI.py:29
msgid "Excellon Options"
msgstr ""

#: appGUI/preferences/excellon/ExcellonOptPrefGroupUI.py:33
#: appGUI/preferences/geometry/GeometryOptPrefGroupUI.py:35
msgid "Create CNC Job"
msgstr ""

#: appGUI/preferences/excellon/ExcellonOptPrefGroupUI.py:35
msgid ""
"Parameters used to create a CNC Job object\n"
"for this drill object."
msgstr ""

#: appGUI/preferences/excellon/ExcellonOptPrefGroupUI.py:48 appTools/ToolMilling.py:1740
msgid ""
"Operation type:\n"
"- Drilling -> will drill the drills/slots associated with this tool\n"
"- Milling -> will mill the drills/slots"
msgstr ""

#: appGUI/preferences/excellon/ExcellonOptPrefGroupUI.py:64 appTools/ToolMilling.py:1762
msgid ""
"Milling type:\n"
"- Drills -> will mill the drills associated with this tool\n"
"- Slots -> will mill the slots associated with this tool\n"
"- Both -> will mill both drills and mills or whatever is available"
msgstr ""

#: appGUI/preferences/excellon/ExcellonOptPrefGroupUI.py:73
#: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:199 appTools/ToolFilm.py:958
#: appTools/ToolMilling.py:1771
msgid "Both"
msgstr ""

#: appGUI/preferences/excellon/ExcellonOptPrefGroupUI.py:80 appTools/ToolMilling.py:1779
msgid "Milling Diameter"
msgstr ""

#: appGUI/preferences/excellon/ExcellonOptPrefGroupUI.py:82 appTools/ToolMilling.py:1781
msgid "The diameter of the tool who will do the milling"
msgstr ""

#: appGUI/preferences/excellon/ExcellonOptPrefGroupUI.py:93
msgid "Mill Holes"
msgstr ""

#: appGUI/preferences/excellon/ExcellonOptPrefGroupUI.py:95
msgid "Create Geometry for milling holes."
msgstr ""

#: appGUI/preferences/excellon/ExcellonOptPrefGroupUI.py:99
msgid "Drill Tool dia"
msgstr ""

#: appGUI/preferences/excellon/ExcellonOptPrefGroupUI.py:110
msgid "Slot Tool dia"
msgstr ""

#: appGUI/preferences/excellon/ExcellonOptPrefGroupUI.py:112
msgid ""
"Diameter of the cutting tool\n"
"when milling slots."
msgstr ""

#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:28
#: appGUI/preferences/general/GeneralAppSettingsGroupUI.py:74
msgid "App Settings"
msgstr ""

#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:49
msgid "Grid Settings"
msgstr ""

#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:53
msgid "X value"
msgstr ""

#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:55
msgid "This is the Grid snap value on X axis."
msgstr ""

#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:65
msgid "Y value"
msgstr ""

#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:67
msgid "This is the Grid snap value on Y axis."
msgstr ""

#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:77
msgid "Snap Max"
msgstr ""

#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:92
msgid "Workspace Settings"
msgstr ""

#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:95
msgid "Active"
msgstr ""

#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:105
msgid ""
"Select the type of rectangle to be used on canvas,\n"
"as valid workspace."
msgstr ""

#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:171
msgid "Orientation"
msgstr ""

#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:172
#: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:228 appTools/ToolFilm.py:1123
msgid ""
"Can be:\n"
"- Portrait\n"
"- Landscape"
msgstr ""

#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:176
#: appGUI/preferences/general/GeneralAppSettingsGroupUI.py:168
#: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:232 appTools/ToolFilm.py:1127
msgid "Portrait"
msgstr ""

#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:177
#: appGUI/preferences/general/GeneralAppSettingsGroupUI.py:169
#: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:233 appTools/ToolFilm.py:1128
msgid "Landscape"
msgstr ""

#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:193
msgid "Notebook"
msgstr ""

#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:195
msgid ""
"This sets the font size for the elements found in the Notebook.\n"
"The notebook is the collapsible area in the left side of the GUI,\n"
"and include the Project, Selected and Tool tabs."
msgstr ""

#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:214 appTools/ToolDblSided.py:673
#: appTools/ToolDblSided.py:847
msgid "Axis"
msgstr ""

#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:216
msgid "This sets the font size for canvas axis."
msgstr ""

#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:233
msgid "Textbox"
msgstr ""

#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:235
msgid ""
"This sets the font size for the Textbox GUI\n"
"elements that are used in the application."
msgstr ""

#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:253
msgid "HUD"
msgstr ""

#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:255
msgid "This sets the font size for the Heads Up Display."
msgstr ""

#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:280
msgid "Mouse Settings"
msgstr ""

#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:284
msgid "Cursor Shape"
msgstr ""

#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:286
msgid ""
"Choose a mouse cursor shape.\n"
"- Small -> with a customizable size.\n"
"- Big -> Infinite lines"
msgstr ""

#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:292
#: appGUI/preferences/general/GeneralAppSettingsGroupUI.py:207
msgid "Small"
msgstr ""

#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:293
#: appGUI/preferences/general/GeneralAppSettingsGroupUI.py:208
msgid "Big"
msgstr ""

#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:300
msgid "Cursor Size"
msgstr ""

#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:302
msgid "Set the size of the mouse cursor, in pixels."
msgstr ""

#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:313
msgid "Cursor Width"
msgstr ""

#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:315
msgid "Set the line width of the mouse cursor, in pixels."
msgstr ""

#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:326
#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:333
msgid "Cursor Color"
msgstr ""

#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:328
msgid "Check this box to color mouse cursor."
msgstr ""

#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:335
msgid "Set the color of the mouse cursor."
msgstr ""

#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:350
msgid "Pan Button"
msgstr ""

#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:352
msgid ""
"Select the mouse button to use for panning:\n"
"- MMB --> Middle Mouse Button\n"
"- RMB --> Right Mouse Button"
msgstr ""

#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:356
#: appGUI/preferences/general/GeneralAppSettingsGroupUI.py:240
msgid "MMB"
msgstr ""

#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:357
#: appGUI/preferences/general/GeneralAppSettingsGroupUI.py:241
msgid "RMB"
msgstr ""

#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:363
msgid "Multiple Selection"
msgstr ""

#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:365
msgid "Select the key used for multiple selection."
msgstr ""

#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:367
#: appGUI/preferences/general/GeneralAppSettingsGroupUI.py:247
msgid "CTRL"
msgstr ""

#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:368
#: appGUI/preferences/general/GeneralAppSettingsGroupUI.py:248
msgid "SHIFT"
msgstr ""

#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:379
msgid "Delete object confirmation"
msgstr ""

#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:381
msgid ""
"When checked the application will ask for user confirmation\n"
"whenever the Delete object(s) event is triggered, either by\n"
"menu shortcut or key shortcut."
msgstr ""

#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:387
msgid "Allow Edit"
msgstr ""

#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:389
msgid ""
"When cheched, the user can edit the objects in the Project Tab\n"
"by using the left mouse button click on the object name.\n"
"Active after restart."
msgstr ""

#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:396
msgid "\"Open\" behavior"
msgstr ""

#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:398
msgid ""
"When checked the path for the last saved file is used when saving files,\n"
"and the path for the last opened file is used when opening files.\n"
"\n"
"When unchecked the path for opening files is the one used last: either the\n"
"path for saving files or the path for opening files."
msgstr ""

#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:407
msgid "Enable ToolTips"
msgstr ""

#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:409
msgid ""
"Check this box if you want to have toolTips displayed\n"
"when hovering with mouse over items throughout the App."
msgstr ""

#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:416
msgid "Allow Machinist Unsafe Settings"
msgstr ""

#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:418
msgid ""
"If checked, some of the application settings will be allowed\n"
"to have values that are usually unsafe to use.\n"
"Like Z travel negative values or Z Cut positive values.\n"
"It will applied at the next application start.\n"
"<<WARNING>>: Don't change this unless you know what you are doing !!!"
msgstr ""

#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:430
msgid "Bookmarks limit"
msgstr ""

#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:432
msgid ""
"The maximum number of bookmarks that may be installed in the menu.\n"
"The number of bookmarks in the bookmark manager may be greater\n"
"but the menu will hold only so much."
msgstr ""

#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:441
msgid "Activity Icon"
msgstr ""

#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:443
msgid "Select the GIF that show activity when FlatCAM is active."
msgstr ""

#: appGUI/preferences/general/GeneralAppPrefGroupUI.py:29
msgid "App Preferences"
msgstr ""

#: appGUI/preferences/general/GeneralAppPrefGroupUI.py:40
msgid ""
"The default value for FlatCAM units.\n"
"Whatever is selected here is set every time\n"
"FlatCAM is started."
msgstr ""

#: appGUI/preferences/general/GeneralAppPrefGroupUI.py:44
msgid "IN"
msgstr ""

#: appGUI/preferences/general/GeneralAppPrefGroupUI.py:50
msgid "Precision MM"
msgstr ""

#: appGUI/preferences/general/GeneralAppPrefGroupUI.py:52
msgid ""
"The number of decimals used throughout the application\n"
"when the set units are in METRIC system.\n"
"Any change here require an application restart."
msgstr ""

#: appGUI/preferences/general/GeneralAppPrefGroupUI.py:64
msgid "Precision INCH"
msgstr ""

#: appGUI/preferences/general/GeneralAppPrefGroupUI.py:66
msgid ""
"The number of decimals used throughout the application\n"
"when the set units are in INCH system.\n"
"Any change here require an application restart."
msgstr ""

#: appGUI/preferences/general/GeneralAppPrefGroupUI.py:78
msgid "Graphic Engine"
msgstr ""

#: appGUI/preferences/general/GeneralAppPrefGroupUI.py:79
msgid ""
"Choose what graphic engine to use in FlatCAM.\n"
"Legacy(2D) -> reduced functionality, slow performance but enhanced compatibility.\n"
"OpenGL(3D) -> full functionality, high performance\n"
"Some graphic cards are too old and do not work in OpenGL(3D) mode, like:\n"
"Intel HD3000 or older. In this case the plot area will be black therefore\n"
"use the Legacy(2D) mode."
msgstr ""

#: appGUI/preferences/general/GeneralAppPrefGroupUI.py:85
msgid "Legacy(2D)"
msgstr ""

#: appGUI/preferences/general/GeneralAppPrefGroupUI.py:86
msgid "OpenGL(3D)"
msgstr ""

#: appGUI/preferences/general/GeneralAppPrefGroupUI.py:98
msgid "APPLICATION LEVEL"
msgstr ""

#: appGUI/preferences/general/GeneralAppPrefGroupUI.py:99
msgid ""
"Choose the default level of usage for FlatCAM.\n"
"BASIC level -> reduced functionality, best for beginner's.\n"
"ADVANCED level -> full functionality.\n"
"\n"
"The choice here will influence the parameters in\n"
"the Selected Tab for all kinds of FlatCAM objects."
msgstr ""

#: appGUI/preferences/general/GeneralAppPrefGroupUI.py:105 appObjects/FlatCAMExcellon.py:163
#: appObjects/FlatCAMGeometry.py:581 appObjects/FlatCAMGerber.py:175
#: appTools/ToolDrilling.py:309 appTools/ToolIsolation.py:268 appTools/ToolMilling.py:305
msgid "Advanced"
msgstr ""

#: appGUI/preferences/general/GeneralAppPrefGroupUI.py:111
msgid "Portable app"
msgstr ""

#: appGUI/preferences/general/GeneralAppPrefGroupUI.py:112
msgid ""
"Choose if the application should run as portable.\n"
"\n"
"If Checked the application will run portable,\n"
"which means that the preferences files will be saved\n"
"in the application folder, in the lib\\config subfolder."
msgstr ""

#: appGUI/preferences/general/GeneralAppPrefGroupUI.py:125
msgid "Languages"
msgstr ""

#: appGUI/preferences/general/GeneralAppPrefGroupUI.py:126
msgid "Set the language used throughout FlatCAM."
msgstr ""

#: appGUI/preferences/general/GeneralAppPrefGroupUI.py:132
msgid "Apply Language"
msgstr ""

#: appGUI/preferences/general/GeneralAppPrefGroupUI.py:133
msgid ""
"Set the language used throughout FlatCAM.\n"
"The app will restart after click."
msgstr ""

#: appGUI/preferences/general/GeneralAppPrefGroupUI.py:147
msgid "Startup Settings"
msgstr ""

#: appGUI/preferences/general/GeneralAppPrefGroupUI.py:151
msgid "Splash Screen"
msgstr ""

#: appGUI/preferences/general/GeneralAppPrefGroupUI.py:153
msgid "Enable display of the splash screen at application startup."
msgstr ""

#: appGUI/preferences/general/GeneralAppPrefGroupUI.py:165
msgid "Sys Tray Icon"
msgstr ""

#: appGUI/preferences/general/GeneralAppPrefGroupUI.py:167
msgid "Enable display of FlatCAM icon in Sys Tray."
msgstr ""

#: appGUI/preferences/general/GeneralAppPrefGroupUI.py:172
msgid "Show Shell"
msgstr ""

#: appGUI/preferences/general/GeneralAppPrefGroupUI.py:174
msgid ""
"Check this box if you want the shell to\n"
"start automatically at startup."
msgstr ""

#: appGUI/preferences/general/GeneralAppPrefGroupUI.py:181
msgid "Show Project"
msgstr ""

#: appGUI/preferences/general/GeneralAppPrefGroupUI.py:183
msgid ""
"Check this box if you want the project/selected/tool tab area to\n"
"to be shown automatically at startup."
msgstr ""

#: appGUI/preferences/general/GeneralAppPrefGroupUI.py:189
msgid "Version Check"
msgstr ""

#: appGUI/preferences/general/GeneralAppPrefGroupUI.py:191
msgid ""
"Check this box if you want to check\n"
"for a new version automatically at startup."
msgstr ""

#: appGUI/preferences/general/GeneralAppPrefGroupUI.py:198
msgid "Send Statistics"
msgstr ""

#: appGUI/preferences/general/GeneralAppPrefGroupUI.py:200
msgid ""
"Check this box if you agree to send anonymous\n"
"stats automatically at startup, to help improve FlatCAM."
msgstr ""

#: appGUI/preferences/general/GeneralAppPrefGroupUI.py:214
msgid "Workers number"
msgstr ""

#: appGUI/preferences/general/GeneralAppPrefGroupUI.py:216
msgid ""
"The number of Qthreads made available to the App.\n"
"A bigger number may finish the jobs more quickly but\n"
"depending on your computer speed, may make the App\n"
"unresponsive. Can have a value between 2 and 16.\n"
"Default value is 2.\n"
"After change, it will be applied at next App start."
msgstr ""

#: appGUI/preferences/general/GeneralAppPrefGroupUI.py:230
msgid "Geo Tolerance"
msgstr ""

#: appGUI/preferences/general/GeneralAppPrefGroupUI.py:232
msgid ""
"This value can counter the effect of the Circle Steps\n"
"parameter. Default value is 0.005.\n"
"A lower value will increase the detail both in image\n"
"and in Gcode for the circles, with a higher cost in\n"
"performance. Higher value will provide more\n"
"performance at the expense of level of detail."
msgstr ""

#: appGUI/preferences/general/GeneralAppPrefGroupUI.py:252
msgid "Save Settings"
msgstr ""

#: appGUI/preferences/general/GeneralAppPrefGroupUI.py:256
msgid "Save Compressed Project"
msgstr ""

#: appGUI/preferences/general/GeneralAppPrefGroupUI.py:258
msgid ""
"Whether to save a compressed or uncompressed project.\n"
"When checked it will save a compressed FlatCAM project."
msgstr ""

#: appGUI/preferences/general/GeneralAppPrefGroupUI.py:267
msgid "Compression"
msgstr ""

#: appGUI/preferences/general/GeneralAppPrefGroupUI.py:269
msgid ""
"The level of compression used when saving\n"
"a FlatCAM project. Higher value means better compression\n"
"but require more RAM usage and more processing time."
msgstr ""

#: appGUI/preferences/general/GeneralAppPrefGroupUI.py:280
msgid "Enable Auto Save"
msgstr ""

#: appGUI/preferences/general/GeneralAppPrefGroupUI.py:282
msgid ""
"Check to enable the autosave feature.\n"
"When enabled, the application will try to save a project\n"
"at the set interval."
msgstr ""

#: appGUI/preferences/general/GeneralAppPrefGroupUI.py:292
msgid "Interval"
msgstr ""

#: appGUI/preferences/general/GeneralAppPrefGroupUI.py:294
msgid ""
"Time interval for autosaving. In milliseconds.\n"
"The application will try to save periodically but only\n"
"if the project was saved manually at least once.\n"
"While active, some operations may block this feature."
msgstr ""

#: appGUI/preferences/general/GeneralAppPrefGroupUI.py:310
msgid "Text to PDF parameters"
msgstr ""

#: appGUI/preferences/general/GeneralAppPrefGroupUI.py:312
msgid "Used when saving text in Code Editor or in FlatCAM Document objects."
msgstr ""

#: appGUI/preferences/general/GeneralAppPrefGroupUI.py:321
msgid "Top Margin"
msgstr ""

#: appGUI/preferences/general/GeneralAppPrefGroupUI.py:323
msgid "Distance between text body and the top of the PDF file."
msgstr ""

#: appGUI/preferences/general/GeneralAppPrefGroupUI.py:334
msgid "Bottom Margin"
msgstr ""

#: appGUI/preferences/general/GeneralAppPrefGroupUI.py:336
msgid "Distance between text body and the bottom of the PDF file."
msgstr ""

#: appGUI/preferences/general/GeneralAppPrefGroupUI.py:347
msgid "Left Margin"
msgstr ""

#: appGUI/preferences/general/GeneralAppPrefGroupUI.py:349
msgid "Distance between text body and the left of the PDF file."
msgstr ""

#: appGUI/preferences/general/GeneralAppPrefGroupUI.py:360
msgid "Right Margin"
msgstr ""

#: appGUI/preferences/general/GeneralAppPrefGroupUI.py:362
msgid "Distance between text body and the right of the PDF file."
msgstr ""

#: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:26
msgid "GUI Preferences"
msgstr ""

#: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:36
msgid "Theme"
msgstr ""

#: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:38
msgid ""
"Select a theme for the application.\n"
"It will theme the plot area."
msgstr ""

#: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:43
msgid "Light"
msgstr ""

#: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:44
msgid "Dark"
msgstr ""

#: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:51
msgid "Use Gray Icons"
msgstr ""

#: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:53
msgid ""
"Check this box to use a set of icons with\n"
"a lighter (gray) color. To be used when a\n"
"full dark theme is applied."
msgstr ""

#: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:73
msgid "Layout"
msgstr ""

#: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:75
msgid ""
"Select a layout for the application.\n"
"It is applied immediately."
msgstr ""

#: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:95
msgid "Style"
msgstr ""

#: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:97
msgid ""
"Select a style for the application.\n"
"It will be applied at the next app start."
msgstr ""

#: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:111
msgid "HDPI Support"
msgstr ""

#: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:113
msgid ""
"Enable High DPI support for the application.\n"
"It will be applied at the next app start."
msgstr ""

#: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:127
msgid "Hover Shape"
msgstr ""

#: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:129
msgid ""
"Enable display of a hover shape for the application objects.\n"
"It is displayed whenever the mouse cursor is hovering\n"
"over any kind of not-selected object."
msgstr ""

#: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:136
msgid "Selection Shape"
msgstr ""

#: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:138
msgid ""
"Enable the display of a selection shape for the application objects.\n"
"It is displayed whenever the mouse selects an object\n"
"either by clicking or dragging mouse from left to right or\n"
"right to left."
msgstr ""

#: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:151
msgid "Left-Right Selection Color"
msgstr ""

#: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:156
msgid "Set the line color for the 'left to right' selection box."
msgstr ""

#: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:165
msgid ""
"Set the fill color for the selection box\n"
"in case that the selection is done from left to right.\n"
"First 6 digits are the color and the last 2\n"
"digits are for alpha (transparency) level."
msgstr ""

#: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:178
msgid "Set the fill transparency for the 'left to right' selection box."
msgstr ""

#: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:191
msgid "Right-Left Selection Color"
msgstr ""

#: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:197
msgid "Set the line color for the 'right to left' selection box."
msgstr ""

#: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:207
msgid ""
"Set the fill color for the selection box\n"
"in case that the selection is done from right to left.\n"
"First 6 digits are the color and the last 2\n"
"digits are for alpha (transparency) level."
msgstr ""

#: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:220
msgid "Set the fill transparency for selection 'right to left' box."
msgstr ""

#: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:236
msgid "Editor Color"
msgstr ""

#: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:240
msgid "Drawing"
msgstr ""

#: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:242
msgid "Set the color for the shape."
msgstr ""

#: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:252
msgid "Set the color of the shape when selected."
msgstr ""

#: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:268
msgid "Project Items Color"
msgstr ""

#: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:272
msgid "Enabled"
msgstr ""

#: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:274
msgid "Set the color of the items in Project Tab Tree."
msgstr ""

#: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:281
msgid "Disabled"
msgstr ""

#: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:283
msgid ""
"Set the color of the items in Project Tab Tree,\n"
"for the case when the items are disabled."
msgstr ""

#: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:292
msgid "Project AutoHide"
msgstr ""

#: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:294
msgid ""
"Check this box if you want the project/selected/tool tab area to\n"
"hide automatically when there are no objects loaded and\n"
"to show whenever a new object is created."
msgstr ""

#: appGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:28
msgid "Geometry Adv. Options"
msgstr ""

#: appGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:36
msgid ""
"A list of Geometry advanced parameters.\n"
"Those parameters are available only for\n"
"Advanced App. Level."
msgstr ""

#: appGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:46
#: appGUI/preferences/tools/Tools2CalPrefGroupUI.py:112
#: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:134
#: appTools/ToolCalibration.py:820 appTools/ToolSolderPaste.py:1312
msgid "Toolchange X-Y"
msgstr ""

#: appGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:48
#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:298
msgid "Toolchange X,Y position."
msgstr ""

#: appGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:58
msgid ""
"Height of the tool just after starting the work.\n"
"Delete the value if you don't need this feature."
msgstr ""

#: appGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:137
#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:358
msgid "Spindle direction"
msgstr ""

#: appGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:139
#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:360
msgid ""
"This sets the direction that the spindle is rotating.\n"
"It can be either:\n"
"- CW = clockwise or\n"
"- CCW = counter clockwise"
msgstr ""

#: appGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:151
#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:371
msgid "Fast Plunge"
msgstr ""

#: appGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:153
#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:373
msgid ""
"By checking this, the vertical move from\n"
"Z_Toolchange to Z_move is done with G0,\n"
"meaning the fastest speed available.\n"
"WARNING: the move is done at Toolchange X,Y coords."
msgstr ""

#: appGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:161
msgid "Segment X size"
msgstr ""

#: appGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:163
msgid ""
"The size of the trace segment on the X axis.\n"
"Useful for auto-leveling.\n"
"A value of 0 means no segmentation on the X axis."
msgstr ""

#: appGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:177
msgid "Segment Y size"
msgstr ""

#: appGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:179
msgid ""
"The size of the trace segment on the Y axis.\n"
"Useful for auto-leveling.\n"
"A value of 0 means no segmentation on the Y axis."
msgstr ""

#: appGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:200
msgid "Area Exclusion"
msgstr ""

#: appGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:202
msgid ""
"Area exclusion parameters.\n"
"Those parameters are available only for\n"
"Advanced App. Level."
msgstr ""

#: appGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:209
msgid "Exclusion areas"
msgstr ""

#: appGUI/preferences/geometry/GeometryEditorPrefGroupUI.py:43
#: appGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:174
msgid ""
"Set the number of selected geometry\n"
"items above which the utility geometry\n"
"becomes just a selection rectangle.\n"
"Increases the performance when moving a\n"
"large number of geometric elements."
msgstr ""

#: appGUI/preferences/geometry/GeometryEditorPrefGroupUI.py:58
msgid ""
"Milling type:\n"
"- climb / best for precision milling and to reduce tool usage\n"
"- conventional / useful when there is no backlash compensation"
msgstr ""

#: appGUI/preferences/geometry/GeometryGenPrefGroupUI.py:29
msgid "Geometry General"
msgstr ""

#: appGUI/preferences/geometry/GeometryGenPrefGroupUI.py:61
msgid ""
"The number of circle steps for <b>Geometry</b> \n"
"circle and arc shapes linear approximation."
msgstr ""

#: appGUI/preferences/geometry/GeometryGenPrefGroupUI.py:75
#: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:41
#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:41
#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:48
#: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:42
msgid "Tools Dia"
msgstr ""

#: appGUI/preferences/geometry/GeometryGenPrefGroupUI.py:77
#: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:108
#: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:43
#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:43
#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:50
#: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:44
msgid ""
"Diameters of the tools, separated by comma.\n"
"The value of the diameter has to use the dot decimals separator.\n"
"Valid values: 0.3, 1.0"
msgstr ""

#: appGUI/preferences/geometry/GeometryGenPrefGroupUI.py:96
msgid ""
"This sets the path optimization algorithm.\n"
"- Rtre -> Rtree algorithm\n"
"- MetaHeuristic -> Google OR-Tools algorithm with\n"
"MetaHeuristic Guided Local Path is used. Default search time is 3sec.\n"
"- Basic -> Using Google OR-Tools Basic algorithm\n"
"- TSA -> Using Travelling Salesman algorithm\n"
"\n"
"Some options are disabled when FlatCAM works in 32bit mode."
msgstr ""

#: appGUI/preferences/geometry/GeometryGenPrefGroupUI.py:108
msgid "Rtree"
msgstr ""

#: appGUI/preferences/geometry/GeometryOptPrefGroupUI.py:29
msgid "Geometry Options"
msgstr ""

#: appGUI/preferences/geometry/GeometryOptPrefGroupUI.py:37
msgid ""
"Create a CNC Job object\n"
"tracing the contours of this\n"
"Geometry object."
msgstr ""

#: appGUI/preferences/geometry/GeometryOptPrefGroupUI.py:81
msgid "Depth/Pass"
msgstr ""

#: appGUI/preferences/geometry/GeometryOptPrefGroupUI.py:83
msgid ""
"The depth to cut on each pass,\n"
"when multidepth is enabled.\n"
"It has positive value although\n"
"it is a fraction from the depth\n"
"which has negative value."
msgstr ""

#: appGUI/preferences/geometry/GeometryOptPrefGroupUI.py:122
#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:116 appTools/ToolDrilling.py:2371
msgid "Tool change"
msgstr ""

#: appGUI/preferences/geometry/GeometryOptPrefGroupUI.py:233
#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:200
msgid "Enable Dwell"
msgstr ""

#: appGUI/preferences/gerber/GerberAdvOptPrefGroupUI.py:27
msgid "Gerber Adv. Options"
msgstr ""

#: appGUI/preferences/gerber/GerberAdvOptPrefGroupUI.py:33
msgid ""
"A list of Gerber advanced parameters.\n"
"Those parameters are available only for\n"
"Advanced App. Level."
msgstr ""

#: appGUI/preferences/gerber/GerberAdvOptPrefGroupUI.py:43
msgid "\"Follow\""
msgstr ""

#: appGUI/preferences/gerber/GerberAdvOptPrefGroupUI.py:64 appObjects/FlatCAMGerber.py:350
#: appTools/ToolCopperThieving.py:581 appTools/ToolCopperThieving.py:770
#: appTools/ToolCopperThieving.py:782 appTools/ToolIsolation.py:1318
#: appTools/ToolNCC.py:1743 appTools/ToolNCC.py:1770 appTools/ToolNCC.py:1878
#: appTools/ToolNCC.py:1891 appTools/ToolNCC.py:2737 appTools/ToolNCC.py:2842
#: appTools/ToolNCC.py:2857 appTools/ToolNCC.py:3123 appTools/ToolNCC.py:3224
#: appTools/ToolNCC.py:3239 camlib.py:1062
msgid "Buffering"
msgstr ""

#: appGUI/preferences/gerber/GerberAdvOptPrefGroupUI.py:66
msgid ""
"Buffering type:\n"
"- None --> best performance, fast file loading but no so good display\n"
"- Full --> slow file loading but good visuals. This is the default.\n"
"<<WARNING>>: Don't change this unless you know what you are doing !!!"
msgstr ""

#: appGUI/preferences/gerber/GerberAdvOptPrefGroupUI.py:71
#: appGUI/preferences/tools/Tools2FiducialsPrefGroupUI.py:88
#: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:196 appTools/ToolFiducials.py:815
#: appTools/ToolFilm.py:955 appTools/ToolProperties.py:453 appTools/ToolProperties.py:456
#: appTools/ToolProperties.py:459 appTools/ToolProperties.py:487
#: appTools/ToolProperties.py:494 appTools/ToolProperties.py:497
msgid "None"
msgstr ""

#: appGUI/preferences/gerber/GerberAdvOptPrefGroupUI.py:77
msgid "Delayed Buffering"
msgstr ""

#: appGUI/preferences/gerber/GerberAdvOptPrefGroupUI.py:79
msgid "When checked it will do the buffering in background."
msgstr ""

#: appGUI/preferences/gerber/GerberAdvOptPrefGroupUI.py:84
msgid "Simplify"
msgstr ""

#: appGUI/preferences/gerber/GerberAdvOptPrefGroupUI.py:86
msgid ""
"When checked all the Gerber polygons will be\n"
"loaded with simplification having a set tolerance.\n"
"<<WARNING>>: Don't change this unless you know what you are doing !!!"
msgstr ""

#: appGUI/preferences/gerber/GerberAdvOptPrefGroupUI.py:93
msgid "Tolerance"
msgstr ""

#: appGUI/preferences/gerber/GerberAdvOptPrefGroupUI.py:94
msgid "Tolerance for polygon simplification."
msgstr ""

#: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:33
msgid "A list of Gerber Editor parameters."
msgstr ""

#: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:43
msgid ""
"Set the number of selected Gerber geometry\n"
"items above which the utility geometry\n"
"becomes just a selection rectangle.\n"
"Increases the performance when moving a\n"
"large number of geometric elements."
msgstr ""

#: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:56
msgid "New Aperture code"
msgstr ""

#: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:69
msgid "New Aperture size"
msgstr ""

#: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:71
msgid "Size for the new aperture"
msgstr ""

#: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:82
msgid "New Aperture type"
msgstr ""

#: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:84
msgid ""
"Type for the new aperture.\n"
"Can be 'C', 'R' or 'O'."
msgstr ""

#: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:106
msgid "Aperture Dimensions"
msgstr ""

#: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:117
msgid "Linear Pad Array"
msgstr ""

#: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:161
msgid "Circular Pad Array"
msgstr ""

#: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:197
msgid "Distance at which to buffer the Gerber element."
msgstr ""

#: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:206
msgid "Scale Tool"
msgstr ""

#: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:212
msgid "Factor to scale the Gerber element."
msgstr ""

#: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:225
msgid "Threshold low"
msgstr ""

#: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:227
msgid "Threshold value under which the apertures are not marked."
msgstr ""

#: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:237
msgid "Threshold high"
msgstr ""

#: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:239
msgid "Threshold value over which the apertures are not marked."
msgstr ""

#: appGUI/preferences/gerber/GerberExpPrefGroupUI.py:27
msgid "Gerber Export"
msgstr ""

#: appGUI/preferences/gerber/GerberExpPrefGroupUI.py:33
msgid ""
"The parameters set here are used in the file exported\n"
"when using the File -> Export -> Export Gerber menu entry."
msgstr ""

#: appGUI/preferences/gerber/GerberExpPrefGroupUI.py:44
#: appGUI/preferences/gerber/GerberExpPrefGroupUI.py:50
#: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:84
#: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:90
msgid "The units used in the Gerber file."
msgstr ""

#: appGUI/preferences/gerber/GerberExpPrefGroupUI.py:58
msgid ""
"The number of digits in the whole part of the number\n"
"and in the fractional part of the number."
msgstr ""

#: appGUI/preferences/gerber/GerberExpPrefGroupUI.py:71
msgid ""
"This numbers signify the number of digits in\n"
"the whole part of Gerber coordinates."
msgstr ""

#: appGUI/preferences/gerber/GerberExpPrefGroupUI.py:87
msgid ""
"This numbers signify the number of digits in\n"
"the decimal part of Gerber coordinates."
msgstr ""

#: appGUI/preferences/gerber/GerberExpPrefGroupUI.py:99
#: appGUI/preferences/gerber/GerberExpPrefGroupUI.py:109
#: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:100
#: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:110
msgid ""
"This sets the type of Gerber zeros.\n"
"If LZ then Leading Zeros are removed and\n"
"Trailing Zeros are kept.\n"
"If TZ is checked then Trailing Zeros are removed\n"
"and Leading Zeros are kept."
msgstr ""

#: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:27
msgid "Gerber General"
msgstr ""

#: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:61
msgid ""
"The number of circle steps for Gerber \n"
"circular aperture linear approximation."
msgstr ""

#: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:73
msgid "Default Values"
msgstr ""

#: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:75
msgid ""
"Those values will be used as fallback values\n"
"in case that they are not found in the Gerber file."
msgstr ""

#: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:126
msgid "Clean Apertures"
msgstr ""

#: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:128
msgid ""
"Will remove apertures that do not have geometry\n"
"thus lowering the number of apertures in the Gerber object."
msgstr ""

#: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:134
msgid "Polarity change buffer"
msgstr ""

#: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:136
msgid ""
"Will apply extra buffering for the\n"
"solid geometry when we have polarity changes.\n"
"May help loading Gerber files that otherwise\n"
"do not load correctly."
msgstr ""

#: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:144
msgid "Store colors"
msgstr ""

#: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:146
msgid ""
"It will store the set colors for Gerber objects.\n"
"Those will be used each time the application is started."
msgstr ""

#: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:152
msgid "Clear Colors"
msgstr ""

#: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:155
msgid "Reset the colors associated with Gerber objects."
msgstr ""

#: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:229
msgid "Stored colors for Gerber objects are deleted."
msgstr ""

#: appGUI/preferences/gerber/GerberOptPrefGroupUI.py:29
msgid "Gerber Options"
msgstr ""

#: appGUI/preferences/gerber/GerberOptPrefGroupUI.py:61
#: appGUI/preferences/gerber/GerberOptPrefGroupUI.py:92
msgid "Rounded Geo"
msgstr ""

#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:27
msgid "Copper Thieving Tool Options"
msgstr ""

#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:39
msgid ""
"A tool to generate a Copper Thieving that can be added\n"
"to a selected Gerber file."
msgstr ""

#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:47
msgid "Number of steps (lines) used to interpolate circles."
msgstr ""

#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:57
#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:261
#: appTools/ToolCopperThieving.py:1189 appTools/ToolCopperThieving.py:1524
msgid "Clearance"
msgstr ""

#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:59
msgid ""
"This set the distance between the copper Thieving components\n"
"(the polygon fill may be split in multiple polygons)\n"
"and the copper traces in the Gerber file."
msgstr ""

#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:86
#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:309 appTools/ToolCopperThieving.py:1218
#: appTools/ToolNCC.py:1301 appTools/ToolNCC.py:1617 appTools/ToolNCC.py:1681
#: appTools/ToolNCC.py:2601 appTools/ToolNCC.py:2610 appTools/ToolNCC.py:4186
#: appTools/ToolNCC.py:4312 defaults.py:468 tclCommands/TclCommandCopperClear.py:190
msgid "Itself"
msgstr ""

#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:87
#: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:285
#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:309
#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:280 appTools/ToolCopperThieving.py:1219
#: appTools/ToolIsolation.py:813 appTools/ToolIsolation.py:1397
#: appTools/ToolIsolation.py:3323 appTools/ToolNCC.py:1315 appTools/ToolNCC.py:1633
#: appTools/ToolNCC.py:1688 appTools/ToolNCC.py:4186 appTools/ToolNCC.py:4322
#: appTools/ToolPaint.py:1060 appTools/ToolPaint.py:3125 appTools/ToolPaint.py:3247
msgid "Area Selection"
msgstr ""

#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:88
#: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:285
#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:309
#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:280 appTools/ToolCopperThieving.py:1220
#: appTools/ToolDblSided.py:764 appTools/ToolIsolation.py:1437
#: appTools/ToolIsolation.py:3323 appTools/ToolNCC.py:1334 appTools/ToolNCC.py:1639
#: appTools/ToolNCC.py:1696 appTools/ToolNCC.py:2074 appTools/ToolNCC.py:2308
#: appTools/ToolNCC.py:2646 appTools/ToolNCC.py:4186 appTools/ToolPaint.py:1079
#: appTools/ToolPaint.py:3125 appTools/ToolPaint.py:3230
#: tclCommands/TclCommandCopperClear.py:192 tclCommands/TclCommandPaint.py:166
msgid "Reference Object"
msgstr ""

#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:90
#: appTools/ToolCopperThieving.py:1222
msgid "Reference:"
msgstr ""

#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:92
msgid ""
"- 'Itself' - the copper Thieving extent is based on the object extent.\n"
"- 'Area Selection' - left mouse click to start selection of the area to be filled.\n"
"- 'Reference Object' - will do copper thieving within the area specified by another "
"object."
msgstr ""

#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:101
#: appGUI/preferences/tools/Tools2EDrillsPrefGroupUI.py:76
#: appGUI/preferences/tools/Tools2EDrillsPrefGroupUI.py:188
#: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:76
#: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:190
#: appTools/ToolCopperThieving.py:1264 appTools/ToolExtractDrills.py:494
#: appTools/ToolExtractDrills.py:632 appTools/ToolPunchGerber.py:767
#: appTools/ToolPunchGerber.py:922
msgid "Rectangular"
msgstr ""

#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:102
#: appTools/ToolCopperThieving.py:1265
msgid "Minimal"
msgstr ""

#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:104
#: appTools/ToolCopperThieving.py:1267 appTools/ToolFilm.py:807
msgid "Box Type:"
msgstr ""

#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:106
#: appTools/ToolCopperThieving.py:1269
msgid ""
"- 'Rectangular' - the bounding box will be of rectangular shape.\n"
"- 'Minimal' - the bounding box will be the convex hull shape."
msgstr ""

#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:120
#: appTools/ToolCopperThieving.py:1285
msgid "Dots Grid"
msgstr ""

#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:121
#: appTools/ToolCopperThieving.py:1286
msgid "Squares Grid"
msgstr ""

#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:122
#: appTools/ToolCopperThieving.py:1287
msgid "Lines Grid"
msgstr ""

#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:124
#: appTools/ToolCopperThieving.py:1289
msgid "Fill Type:"
msgstr ""

#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:126
#: appTools/ToolCopperThieving.py:1291
msgid ""
"- 'Solid' - copper thieving will be a solid polygon.\n"
"- 'Dots Grid' - the empty area will be filled with a pattern of dots.\n"
"- 'Squares Grid' - the empty area will be filled with a pattern of squares.\n"
"- 'Lines Grid' - the empty area will be filled with a pattern of lines."
msgstr ""

#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:134
#: appTools/ToolCopperThieving.py:1310
msgid "Dots Grid Parameters"
msgstr ""

#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:140
#: appTools/ToolCopperThieving.py:1316
msgid "Dot diameter in Dots Grid."
msgstr ""

#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:153
#: appTools/ToolCopperThieving.py:1329
msgid "Distance between each two dots in Dots Grid."
msgstr ""

#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:163
#: appTools/ToolCopperThieving.py:1350
msgid "Squares Grid Parameters"
msgstr ""

#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:169
#: appTools/ToolCopperThieving.py:1356
msgid "Square side size in Squares Grid."
msgstr ""

#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:182
#: appTools/ToolCopperThieving.py:1369
msgid "Distance between each two squares in Squares Grid."
msgstr ""

#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:192
#: appTools/ToolCopperThieving.py:1390
msgid "Lines Grid Parameters"
msgstr ""

#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:198
#: appTools/ToolCopperThieving.py:1396
msgid "Line thickness size in Lines Grid."
msgstr ""

#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:211
#: appTools/ToolCopperThieving.py:1409
msgid "Distance between each two lines in Lines Grid."
msgstr ""

#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:221
#: appTools/ToolCopperThieving.py:1447
msgid "Robber Bar Parameters"
msgstr ""

#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:223
#: appTools/ToolCopperThieving.py:1449
msgid ""
"Parameters used for the robber bar.\n"
"Robber bar = copper border to help in pattern hole plating."
msgstr ""

#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:231
#: appTools/ToolCopperThieving.py:1457
msgid "Bounding box margin for robber bar."
msgstr ""

#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:242
#: appGUI/preferences/tools/ToolsCornersPrefGroupUI.py:42
#: appTools/ToolCopperThieving.py:1468 appTools/ToolCorners.py:384
#: appTools/ToolEtchCompensation.py:370
msgid "Thickness"
msgstr ""

#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:244
#: appTools/ToolCopperThieving.py:1470
msgid "The robber bar thickness."
msgstr ""

#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:254
#: appTools/ToolCopperThieving.py:1501
msgid "Pattern Plating Mask"
msgstr ""

#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:256
#: appTools/ToolCopperThieving.py:1503
msgid "Generate a mask for pattern plating."
msgstr ""

#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:263
#: appTools/ToolCopperThieving.py:1526
msgid ""
"The distance between the possible copper thieving elements\n"
"and/or robber bar and the actual openings in the mask."
msgstr ""

#: appGUI/preferences/tools/Tools2CalPrefGroupUI.py:27
msgid "Calibration Tool Options"
msgstr ""

#: appGUI/preferences/tools/Tools2CalPrefGroupUI.py:38
#: appGUI/preferences/tools/Tools2EDrillsPrefGroupUI.py:38
#: appGUI/preferences/tools/Tools2FiducialsPrefGroupUI.py:38
#: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:38
#: appGUI/preferences/tools/ToolsCornersPrefGroupUI.py:37
#: appTools/ToolCopperThieving.py:1184 appTools/ToolCorners.py:379
#: appTools/ToolFiducials.py:765
msgid "Parameters used for this tool."
msgstr ""

#: appGUI/preferences/tools/Tools2CalPrefGroupUI.py:43 appTools/ToolCalibration.py:876
msgid "Source Type"
msgstr ""

#: appGUI/preferences/tools/Tools2CalPrefGroupUI.py:44 appTools/ToolCalibration.py:877
msgid ""
"The source of calibration points.\n"
"It can be:\n"
"- Object -> click a hole geo for Excellon or a pad for Gerber\n"
"- Free -> click freely on canvas to acquire the calibration points"
msgstr ""

#: appGUI/preferences/tools/Tools2CalPrefGroupUI.py:49 appTools/ToolCalibration.py:882
msgid "Free"
msgstr ""

#: appGUI/preferences/tools/Tools2CalPrefGroupUI.py:63 appTools/ToolCalibration.py:771
msgid "Height (Z) for travelling between the points."
msgstr ""

#: appGUI/preferences/tools/Tools2CalPrefGroupUI.py:75 appTools/ToolCalibration.py:783
msgid "Verification Z"
msgstr ""

#: appGUI/preferences/tools/Tools2CalPrefGroupUI.py:77 appTools/ToolCalibration.py:785
msgid "Height (Z) for checking the point."
msgstr ""

#: appGUI/preferences/tools/Tools2CalPrefGroupUI.py:89 appTools/ToolCalibration.py:797
msgid "Zero Z tool"
msgstr ""

#: appGUI/preferences/tools/Tools2CalPrefGroupUI.py:91 appTools/ToolCalibration.py:799
msgid ""
"Include a sequence to zero the height (Z)\n"
"of the verification tool."
msgstr ""

#: appGUI/preferences/tools/Tools2CalPrefGroupUI.py:100 appTools/ToolCalibration.py:808
msgid "Height (Z) for mounting the verification probe."
msgstr ""

#: appGUI/preferences/tools/Tools2CalPrefGroupUI.py:114 appTools/ToolCalibration.py:822
msgid ""
"Toolchange X,Y position.\n"
"If no value is entered then the current\n"
"(x, y) point will be used,"
msgstr ""

#: appGUI/preferences/tools/Tools2CalPrefGroupUI.py:125 appTools/ToolCalibration.py:848
msgid "Second point"
msgstr ""

#: appGUI/preferences/tools/Tools2CalPrefGroupUI.py:127 appTools/ToolCalibration.py:850
msgid ""
"Second point in the Gcode verification can be:\n"
"- top-left -> the user will align the PCB vertically\n"
"- bottom-right -> the user will align the PCB horizontally"
msgstr ""

#: appGUI/preferences/tools/Tools2CalPrefGroupUI.py:131 appTools/ToolCalibration.py:854
#: app_Main.py:4990
msgid "Top-Left"
msgstr ""

#: appGUI/preferences/tools/Tools2CalPrefGroupUI.py:132 appTools/ToolCalibration.py:855
#: app_Main.py:4991
msgid "Bottom-Right"
msgstr ""

#: appGUI/preferences/tools/Tools2EDrillsPrefGroupUI.py:27
msgid "Extract Drills Options"
msgstr ""

#: appGUI/preferences/tools/Tools2EDrillsPrefGroupUI.py:42
#: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:42
#: appTools/ToolExtractDrills.py:460 appTools/ToolPunchGerber.py:729
msgid "Processed Pads Type"
msgstr ""

#: appGUI/preferences/tools/Tools2EDrillsPrefGroupUI.py:44
#: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:44
#: appTools/ToolExtractDrills.py:462 appTools/ToolPunchGerber.py:731
msgid ""
"The type of pads shape to be processed.\n"
"If the PCB has many SMD pads with rectangular pads,\n"
"disable the Rectangular aperture."
msgstr ""

#: appGUI/preferences/tools/Tools2EDrillsPrefGroupUI.py:54
#: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:54
#: appTools/ToolExtractDrills.py:472 appTools/ToolPunchGerber.py:745
msgid "Process Circular Pads."
msgstr ""

#: appGUI/preferences/tools/Tools2EDrillsPrefGroupUI.py:60
#: appGUI/preferences/tools/Tools2EDrillsPrefGroupUI.py:162
#: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:60
#: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:164
#: appTools/ToolExtractDrills.py:478 appTools/ToolExtractDrills.py:606
#: appTools/ToolPunchGerber.py:751 appTools/ToolPunchGerber.py:896
msgid "Oblong"
msgstr ""

#: appGUI/preferences/tools/Tools2EDrillsPrefGroupUI.py:62
#: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:62
#: appTools/ToolExtractDrills.py:480 appTools/ToolPunchGerber.py:753
msgid "Process Oblong Pads."
msgstr ""

#: appGUI/preferences/tools/Tools2EDrillsPrefGroupUI.py:70
#: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:70
#: appTools/ToolExtractDrills.py:488 appTools/ToolPunchGerber.py:761
msgid "Process Square Pads."
msgstr ""

#: appGUI/preferences/tools/Tools2EDrillsPrefGroupUI.py:78
#: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:78
#: appTools/ToolExtractDrills.py:496 appTools/ToolPunchGerber.py:769
msgid "Process Rectangular Pads."
msgstr ""

#: appGUI/preferences/tools/Tools2EDrillsPrefGroupUI.py:84
#: appGUI/preferences/tools/Tools2EDrillsPrefGroupUI.py:201
#: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:84
#: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:203
#: appTools/ToolExtractDrills.py:502 appTools/ToolExtractDrills.py:645
#: appTools/ToolProperties.py:175 appTools/ToolPunchGerber.py:775
#: appTools/ToolPunchGerber.py:935
msgid "Others"
msgstr ""

#: appGUI/preferences/tools/Tools2EDrillsPrefGroupUI.py:86
#: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:86
#: appTools/ToolExtractDrills.py:504 appTools/ToolPunchGerber.py:777
msgid "Process pads not in the categories above."
msgstr ""

#: appGUI/preferences/tools/Tools2EDrillsPrefGroupUI.py:99
#: appGUI/preferences/tools/Tools2EDrillsPrefGroupUI.py:123
#: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:100
#: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:125
#: appTools/ToolExtractDrills.py:531 appTools/ToolExtractDrills.py:548
#: appTools/ToolPunchGerber.py:804 appTools/ToolPunchGerber.py:838
msgid "Fixed Diameter"
msgstr ""

#: appGUI/preferences/tools/Tools2EDrillsPrefGroupUI.py:100
#: appGUI/preferences/tools/Tools2EDrillsPrefGroupUI.py:140
#: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:101
#: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:142
#: appTools/ToolExtractDrills.py:532 appTools/ToolExtractDrills.py:584
#: appTools/ToolPunchGerber.py:805 appTools/ToolPunchGerber.py:868
msgid "Fixed Annular Ring"
msgstr ""

#: appGUI/preferences/tools/Tools2EDrillsPrefGroupUI.py:101
#: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:102
#: appTools/ToolExtractDrills.py:533 appTools/ToolPunchGerber.py:806
msgid "Proportional"
msgstr ""

#: appGUI/preferences/tools/Tools2EDrillsPrefGroupUI.py:107
#: appTools/ToolExtractDrills.py:522
msgid ""
"The method for processing pads. Can be:\n"
"- Fixed Diameter -> all holes will have a set size\n"
"- Fixed Annular Ring -> all holes will have a set annular ring\n"
"- Proportional -> each hole size will be a fraction of the pad size"
msgstr ""

#: appGUI/preferences/tools/Tools2EDrillsPrefGroupUI.py:133
#: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:135
#: appTools/ToolExtractDrills.py:558 appTools/ToolPunchGerber.py:848
msgid "Fixed hole diameter."
msgstr ""

#: appGUI/preferences/tools/Tools2EDrillsPrefGroupUI.py:142
#: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:144
#: appTools/ToolExtractDrills.py:586 appTools/ToolPunchGerber.py:870
msgid ""
"The size of annular ring.\n"
"The copper sliver between the hole exterior\n"
"and the margin of the copper pad."
msgstr ""

#: appGUI/preferences/tools/Tools2EDrillsPrefGroupUI.py:151
#: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:153
#: appTools/ToolExtractDrills.py:595 appTools/ToolPunchGerber.py:885
msgid "The size of annular ring for circular pads."
msgstr ""

#: appGUI/preferences/tools/Tools2EDrillsPrefGroupUI.py:164
#: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:166
#: appTools/ToolExtractDrills.py:608 appTools/ToolPunchGerber.py:898
msgid "The size of annular ring for oblong pads."
msgstr ""

#: appGUI/preferences/tools/Tools2EDrillsPrefGroupUI.py:177
#: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:179
#: appTools/ToolExtractDrills.py:621 appTools/ToolPunchGerber.py:911
msgid "The size of annular ring for square pads."
msgstr ""

#: appGUI/preferences/tools/Tools2EDrillsPrefGroupUI.py:190
#: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:192
#: appTools/ToolExtractDrills.py:634 appTools/ToolPunchGerber.py:924
msgid "The size of annular ring for rectangular pads."
msgstr ""

#: appGUI/preferences/tools/Tools2EDrillsPrefGroupUI.py:203
#: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:205
#: appTools/ToolExtractDrills.py:647 appTools/ToolPunchGerber.py:937
msgid "The size of annular ring for other pads."
msgstr ""

#: appGUI/preferences/tools/Tools2EDrillsPrefGroupUI.py:213
#: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:215
#: appTools/ToolExtractDrills.py:668 appTools/ToolPunchGerber.py:953
msgid "Proportional Diameter"
msgstr ""

#: appGUI/preferences/tools/Tools2EDrillsPrefGroupUI.py:222
#: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:224
msgid "Factor"
msgstr ""

#: appGUI/preferences/tools/Tools2EDrillsPrefGroupUI.py:224
#: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:226
#: appTools/ToolExtractDrills.py:679 appTools/ToolPunchGerber.py:964
msgid ""
"Proportional Diameter.\n"
"The hole diameter will be a fraction of the pad size."
msgstr ""

#: appGUI/preferences/tools/Tools2FiducialsPrefGroupUI.py:27
msgid "Fiducials Tool Options"
msgstr ""

#: appGUI/preferences/tools/Tools2FiducialsPrefGroupUI.py:45 appTools/ToolFiducials.py:772
msgid ""
"This set the fiducial diameter if fiducial type is circular,\n"
"otherwise is the size of the fiducial.\n"
"The soldermask opening is double than that."
msgstr ""

#: appGUI/preferences/tools/Tools2FiducialsPrefGroupUI.py:73 appTools/ToolFiducials.py:800
msgid "Auto"
msgstr ""

#: appGUI/preferences/tools/Tools2FiducialsPrefGroupUI.py:76 appTools/ToolFiducials.py:803
msgid "Mode:"
msgstr ""

#: appGUI/preferences/tools/Tools2FiducialsPrefGroupUI.py:78
msgid ""
"- 'Auto' - automatic placement of fiducials in the corners of the bounding box.\n"
"- 'Manual' - manual placement of fiducials."
msgstr ""

#: appGUI/preferences/tools/Tools2FiducialsPrefGroupUI.py:86 appTools/ToolFiducials.py:813
msgid "Up"
msgstr ""

#: appGUI/preferences/tools/Tools2FiducialsPrefGroupUI.py:87 appTools/ToolFiducials.py:814
msgid "Down"
msgstr ""

#: appGUI/preferences/tools/Tools2FiducialsPrefGroupUI.py:90 appTools/ToolFiducials.py:817
msgid "Second fiducial"
msgstr ""

#: appGUI/preferences/tools/Tools2FiducialsPrefGroupUI.py:92 appTools/ToolFiducials.py:819
msgid ""
"The position for the second fiducial.\n"
"- 'Up' - the order is: bottom-left, top-left, top-right.\n"
"- 'Down' - the order is: bottom-left, bottom-right, top-right.\n"
"- 'None' - there is no second fiducial. The order is: bottom-left, top-right."
msgstr ""

#: appGUI/preferences/tools/Tools2FiducialsPrefGroupUI.py:108 appTools/ToolFiducials.py:835
msgid "Cross"
msgstr ""

#: appGUI/preferences/tools/Tools2FiducialsPrefGroupUI.py:109 appTools/ToolFiducials.py:836
msgid "Chess"
msgstr ""

#: appGUI/preferences/tools/Tools2FiducialsPrefGroupUI.py:112 appTools/ToolFiducials.py:838
msgid "Fiducial Type"
msgstr ""

#: appGUI/preferences/tools/Tools2FiducialsPrefGroupUI.py:114 appTools/ToolFiducials.py:840
msgid ""
"The type of fiducial.\n"
"- 'Circular' - this is the regular fiducial.\n"
"- 'Cross' - cross lines fiducial.\n"
"- 'Chess' - chess pattern fiducial."
msgstr ""

#: appGUI/preferences/tools/Tools2FiducialsPrefGroupUI.py:123 appTools/ToolFiducials.py:849
msgid "Line thickness"
msgstr ""

#: appGUI/preferences/tools/Tools2InvertPrefGroupUI.py:27
msgid "Invert Gerber Tool Options"
msgstr ""

#: appGUI/preferences/tools/Tools2InvertPrefGroupUI.py:33
msgid ""
"A tool to invert Gerber geometry from positive to negative\n"
"and in revers."
msgstr ""

#: appGUI/preferences/tools/Tools2InvertPrefGroupUI.py:47 appTools/ToolInvertGerber.py:236
msgid ""
"Distance by which to avoid\n"
"the edges of the Gerber object."
msgstr ""

#: appGUI/preferences/tools/Tools2InvertPrefGroupUI.py:58 appTools/ToolInvertGerber.py:247
msgid "Lines Join Style"
msgstr ""

#: appGUI/preferences/tools/Tools2InvertPrefGroupUI.py:60 appTools/ToolInvertGerber.py:249
msgid ""
"The way that the lines in the object outline will be joined.\n"
"Can be:\n"
"- rounded -> an arc is added between two joining lines\n"
"- square -> the lines meet in 90 degrees angle\n"
"- bevel -> the lines are joined by a third line"
msgstr ""

#: appGUI/preferences/tools/Tools2OptimalPrefGroupUI.py:27
msgid "Optimal Tool Options"
msgstr ""

#: appGUI/preferences/tools/Tools2OptimalPrefGroupUI.py:33
msgid ""
"A tool to find the minimum distance between\n"
"every two Gerber geometric elements"
msgstr ""

#: appGUI/preferences/tools/Tools2OptimalPrefGroupUI.py:48 appTools/ToolOptimal.py:434
msgid "Precision"
msgstr ""

#: appGUI/preferences/tools/Tools2OptimalPrefGroupUI.py:50
msgid "Number of decimals for the distances and coordinates in this tool."
msgstr ""

#: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:27
msgid "Punch Gerber Options"
msgstr ""

#: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:108
#: appTools/ToolPunchGerber.py:795
msgid ""
"The punch hole source can be:\n"
"- Excellon Object-> the Excellon object drills center will serve as reference.\n"
"- Fixed Diameter -> will try to use the pads center as reference adding fixed diameter "
"holes.\n"
"- Fixed Annular Ring -> will try to keep a set annular ring.\n"
"- Proportional -> will make a Gerber punch hole having the diameter a percentage of the "
"pad diameter."
msgstr ""

#: appGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:27
msgid "QRCode Tool Options"
msgstr ""

#: appGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:33
msgid ""
"A tool to create a QRCode that can be inserted\n"
"into a selected Gerber file, or it can be exported as a file."
msgstr ""

#: appGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:45 appTools/ToolQRCode.py:699
msgid "Version"
msgstr ""

#: appGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:47 appTools/ToolQRCode.py:701
msgid ""
"QRCode version can have values from 1 (21x21 boxes)\n"
"to 40 (177x177 boxes)."
msgstr ""

#: appGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:58 appTools/ToolQRCode.py:712
msgid "Error correction"
msgstr ""

#: appGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:60
#: appGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:71 appTools/ToolQRCode.py:714
#: appTools/ToolQRCode.py:725
#, python-format
msgid ""
"Parameter that controls the error correction used for the QR Code.\n"
"L = maximum 7%% errors can be corrected\n"
"M = maximum 15%% errors can be corrected\n"
"Q = maximum 25%% errors can be corrected\n"
"H = maximum 30%% errors can be corrected."
msgstr ""

#: appGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:81 appTools/ToolQRCode.py:735
msgid "Box Size"
msgstr ""

#: appGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:83 appTools/ToolQRCode.py:737
msgid ""
"Box size control the overall size of the QRcode\n"
"by adjusting the size of each box in the code."
msgstr ""

#: appGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:94 appTools/ToolQRCode.py:748
msgid "Border Size"
msgstr ""

#: appGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:96 appTools/ToolQRCode.py:750
msgid ""
"Size of the QRCode border. How many boxes thick is the border.\n"
"Default value is 4. The width of the clearance around the QRCode."
msgstr ""

#: appGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:107 appTools/ToolQRCode.py:670
msgid "QRCode Data"
msgstr ""

#: appGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:109 appTools/ToolQRCode.py:672
msgid "QRCode Data. Alphanumeric text to be encoded in the QRCode."
msgstr ""

#: appGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:113 appTools/ToolQRCode.py:676
msgid "Add here the text to be included in the QRCode..."
msgstr ""

#: appGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:119 appTools/ToolQRCode.py:761
msgid "Polarity"
msgstr ""

#: appGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:121 appTools/ToolQRCode.py:763
msgid ""
"Choose the polarity of the QRCode.\n"
"It can be drawn in a negative way (squares are clear)\n"
"or in a positive way (squares are opaque)."
msgstr ""

#: appGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:125 appTools/ToolFilm.py:997
#: appTools/ToolQRCode.py:767
msgid "Negative"
msgstr ""

#: appGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:126 appTools/ToolFilm.py:996
#: appTools/ToolQRCode.py:768
msgid "Positive"
msgstr ""

#: appGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:128 appTools/ToolQRCode.py:770
msgid ""
"Choose the type of QRCode to be created.\n"
"If added on a Silkscreen Gerber file the QRCode may\n"
"be added as positive. If it is added to a Copper Gerber\n"
"file then perhaps the QRCode can be added as negative."
msgstr ""

#: appGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:139
#: appGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:145 appTools/ToolQRCode.py:781
#: appTools/ToolQRCode.py:787
msgid ""
"The bounding box, meaning the empty space that surrounds\n"
"the QRCode geometry, can have a rounded or a square shape."
msgstr ""

#: appGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:152 appTools/ToolQRCode.py:815
msgid "Fill Color"
msgstr ""

#: appGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:154 appTools/ToolQRCode.py:817
msgid "Set the QRCode fill color (squares color)."
msgstr ""

#: appGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:162 appTools/ToolQRCode.py:839
msgid "Back Color"
msgstr ""

#: appGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:164 appTools/ToolQRCode.py:841
msgid "Set the QRCode background color."
msgstr ""

#: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:27
msgid "Check Rules Tool Options"
msgstr ""

#: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:32
msgid ""
"A tool to check if Gerber files are within a set\n"
"of Manufacturing Rules."
msgstr ""

#: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:42 appTools/ToolRulesCheck.py:428
#: appTools/ToolRulesCheck.py:1367
msgid "Trace Size"
msgstr ""

#: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:44
#: appTools/ToolRulesCheck.py:1369
msgid "This checks if the minimum size for traces is met."
msgstr ""

#: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:54
#: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:74
#: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:94
#: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:114
#: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:134
#: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:154
#: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:174
#: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:194
#: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:216
#: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:236
#: appTools/ToolRulesCheck.py:1379 appTools/ToolRulesCheck.py:1401
#: appTools/ToolRulesCheck.py:1424 appTools/ToolRulesCheck.py:1447
#: appTools/ToolRulesCheck.py:1470 appTools/ToolRulesCheck.py:1493
#: appTools/ToolRulesCheck.py:1516 appTools/ToolRulesCheck.py:1539
#: appTools/ToolRulesCheck.py:1564 appTools/ToolRulesCheck.py:1587
msgid "Min value"
msgstr ""

#: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:56
#: appTools/ToolRulesCheck.py:1381
msgid "Minimum acceptable trace size."
msgstr ""

#: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:61 appTools/ToolRulesCheck.py:656
#: appTools/ToolRulesCheck.py:686 appTools/ToolRulesCheck.py:1388
msgid "Copper to Copper clearance"
msgstr ""

#: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:63
#: appTools/ToolRulesCheck.py:1390
msgid ""
"This checks if the minimum clearance between copper\n"
"features is met."
msgstr ""

#: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:76
#: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:96
#: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:116
#: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:136
#: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:156
#: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:176
#: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:238
#: appTools/ToolRulesCheck.py:1403 appTools/ToolRulesCheck.py:1426
#: appTools/ToolRulesCheck.py:1449 appTools/ToolRulesCheck.py:1472
#: appTools/ToolRulesCheck.py:1495 appTools/ToolRulesCheck.py:1518
#: appTools/ToolRulesCheck.py:1566
msgid "Minimum acceptable clearance value."
msgstr ""

#: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:81 appTools/ToolRulesCheck.py:716
#: appTools/ToolRulesCheck.py:722 appTools/ToolRulesCheck.py:735
#: appTools/ToolRulesCheck.py:742 appTools/ToolRulesCheck.py:1411
msgid "Copper to Outline clearance"
msgstr ""

#: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:83
#: appTools/ToolRulesCheck.py:1413
msgid ""
"This checks if the minimum clearance between copper\n"
"features and the outline is met."
msgstr ""

#: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:101
#: appTools/ToolRulesCheck.py:1434
msgid "Silk to Silk Clearance"
msgstr ""

#: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:103
#: appTools/ToolRulesCheck.py:1436
msgid ""
"This checks if the minimum clearance between silkscreen\n"
"features and silkscreen features is met."
msgstr ""

#: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:121
#: appTools/ToolRulesCheck.py:825 appTools/ToolRulesCheck.py:831
#: appTools/ToolRulesCheck.py:849 appTools/ToolRulesCheck.py:1457
msgid "Silk to Solder Mask Clearance"
msgstr ""

#: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:123
#: appTools/ToolRulesCheck.py:1459
msgid ""
"This checks if the minimum clearance between silkscreen\n"
"features and soldermask features is met."
msgstr ""

#: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:141
#: appTools/ToolRulesCheck.py:879 appTools/ToolRulesCheck.py:885
#: appTools/ToolRulesCheck.py:899 appTools/ToolRulesCheck.py:906
#: appTools/ToolRulesCheck.py:1480
msgid "Silk to Outline Clearance"
msgstr ""

#: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:143
#: appTools/ToolRulesCheck.py:1482
msgid ""
"This checks if the minimum clearance between silk\n"
"features and the outline is met."
msgstr ""

#: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:161
#: appTools/ToolRulesCheck.py:917 appTools/ToolRulesCheck.py:944
#: appTools/ToolRulesCheck.py:1503
msgid "Minimum Solder Mask Sliver"
msgstr ""

#: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:163
#: appTools/ToolRulesCheck.py:1505
msgid ""
"This checks if the minimum clearance between soldermask\n"
"features and soldermask features is met."
msgstr ""

#: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:181
#: appTools/ToolRulesCheck.py:982 appTools/ToolRulesCheck.py:988
#: appTools/ToolRulesCheck.py:1004 appTools/ToolRulesCheck.py:1011
#: appTools/ToolRulesCheck.py:1526
msgid "Minimum Annular Ring"
msgstr ""

#: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:183
#: appTools/ToolRulesCheck.py:1528
msgid ""
"This checks if the minimum copper ring left by drilling\n"
"a hole into a pad is met."
msgstr ""

#: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:196
#: appTools/ToolRulesCheck.py:1541
msgid "Minimum acceptable ring value."
msgstr ""

#: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:203
#: appTools/ToolRulesCheck.py:372 appTools/ToolRulesCheck.py:1551
msgid "Hole to Hole Clearance"
msgstr ""

#: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:205
#: appTools/ToolRulesCheck.py:1553
msgid ""
"This checks if the minimum clearance between a drill hole\n"
"and another drill hole is met."
msgstr ""

#: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:218
#: appTools/ToolRulesCheck.py:1589
msgid "Minimum acceptable drill size."
msgstr ""

#: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:223
#: appTools/ToolRulesCheck.py:346 appTools/ToolRulesCheck.py:1574
msgid "Hole Size"
msgstr ""

#: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:225
#: appTools/ToolRulesCheck.py:1576
msgid ""
"This checks if the drill holes\n"
"sizes are above the threshold."
msgstr ""

#: appGUI/preferences/tools/Tools2sidedPrefGroupUI.py:27
msgid "2Sided Tool Options"
msgstr ""

#: appGUI/preferences/tools/Tools2sidedPrefGroupUI.py:33
msgid ""
"A tool to help in creating a double sided\n"
"PCB using alignment holes."
msgstr ""

#: appGUI/preferences/tools/Tools2sidedPrefGroupUI.py:47
msgid "Drill dia"
msgstr ""

#: appGUI/preferences/tools/Tools2sidedPrefGroupUI.py:49 appTools/ToolDblSided.py:833
#: appTools/ToolDblSided.py:838
msgid "Diameter of the drill for the alignment holes."
msgstr ""

#: appGUI/preferences/tools/Tools2sidedPrefGroupUI.py:56
msgid "Align Axis"
msgstr ""

#: appGUI/preferences/tools/Tools2sidedPrefGroupUI.py:58
#: appGUI/preferences/tools/Tools2sidedPrefGroupUI.py:71 appTools/ToolDblSided.py:674
#: appTools/ToolDblSided.py:849
msgid "Mirror vertically (X) or horizontally (Y)."
msgstr ""

#: appGUI/preferences/tools/Tools2sidedPrefGroupUI.py:69
msgid "Mirror Axis:"
msgstr ""

#: appGUI/preferences/tools/Tools2sidedPrefGroupUI.py:86 appTools/ToolDblSided.py:700
msgid "Box"
msgstr ""

#: appGUI/preferences/tools/Tools2sidedPrefGroupUI.py:87 appTools/ToolDblSided.py:701
msgid "Hole Snap"
msgstr ""

#: appGUI/preferences/tools/Tools2sidedPrefGroupUI.py:90
msgid "Axis Ref"
msgstr ""

#: appGUI/preferences/tools/Tools2sidedPrefGroupUI.py:92
msgid ""
"The coordinates used as reference for the mirror operation.\n"
"Can be:\n"
"- Point -> a set of coordinates (x,y) around which the object is mirrored\n"
"- Box -> a set of coordinates (x, y) obtained from the center of the\n"
"bounding box of another object selected below\n"
"- Hole Snap-> a point defined by the center of a drill hone in a Excellon object"
msgstr ""

#: appGUI/preferences/tools/ToolsCalculatorsPrefGroupUI.py:27
msgid "Calculators Tool Options"
msgstr ""

#: appGUI/preferences/tools/ToolsCalculatorsPrefGroupUI.py:31
#: appTools/ToolCalculators.py:152
msgid "V-Shape Tool Calculator"
msgstr ""

#: appGUI/preferences/tools/ToolsCalculatorsPrefGroupUI.py:33
msgid ""
"Calculate the tool diameter for a given V-shape tool,\n"
"having the tip diameter, tip angle and\n"
"depth-of-cut as parameters."
msgstr ""

#: appGUI/preferences/tools/ToolsCalculatorsPrefGroupUI.py:50
#: appTools/ToolCalculators.py:220
msgid "Tip Diameter"
msgstr ""

#: appGUI/preferences/tools/ToolsCalculatorsPrefGroupUI.py:52
#: appTools/ToolCalculators.py:228
msgid ""
"This is the tool tip diameter.\n"
"It is specified by manufacturer."
msgstr ""

#: appGUI/preferences/tools/ToolsCalculatorsPrefGroupUI.py:64
#: appTools/ToolCalculators.py:231
msgid "Tip Angle"
msgstr ""

#: appGUI/preferences/tools/ToolsCalculatorsPrefGroupUI.py:66
msgid ""
"This is the angle on the tip of the tool.\n"
"It is specified by manufacturer."
msgstr ""

#: appGUI/preferences/tools/ToolsCalculatorsPrefGroupUI.py:80
msgid ""
"This is depth to cut into material.\n"
"In the CNCJob object it is the CutZ parameter."
msgstr ""

#: appGUI/preferences/tools/ToolsCalculatorsPrefGroupUI.py:87
#: appTools/ToolCalculators.py:154
msgid "ElectroPlating Calculator"
msgstr ""

#: appGUI/preferences/tools/ToolsCalculatorsPrefGroupUI.py:89
#: appTools/ToolCalculators.py:284
msgid ""
"This calculator is useful for those who plate the via/pad/drill holes,\n"
"using a method like graphite ink or calcium hypophosphite ink or palladium chloride."
msgstr ""

#: appGUI/preferences/tools/ToolsCalculatorsPrefGroupUI.py:100
#: appTools/ToolCalculators.py:293
msgid "Board Length"
msgstr ""

#: appGUI/preferences/tools/ToolsCalculatorsPrefGroupUI.py:102
#: appTools/ToolCalculators.py:299
msgid "This is the board length. In centimeters."
msgstr ""

#: appGUI/preferences/tools/ToolsCalculatorsPrefGroupUI.py:112
#: appTools/ToolCalculators.py:301
msgid "Board Width"
msgstr ""

#: appGUI/preferences/tools/ToolsCalculatorsPrefGroupUI.py:114
#: appTools/ToolCalculators.py:307
msgid "This is the board width.In centimeters."
msgstr ""

#: appGUI/preferences/tools/ToolsCalculatorsPrefGroupUI.py:119
#: appTools/ToolCalculators.py:309
msgid "Current Density"
msgstr ""

#: appGUI/preferences/tools/ToolsCalculatorsPrefGroupUI.py:125
#: appTools/ToolCalculators.py:316
msgid ""
"Current density to pass through the board. \n"
"In Amps per Square Feet ASF."
msgstr ""

#: appGUI/preferences/tools/ToolsCalculatorsPrefGroupUI.py:131
#: appTools/ToolCalculators.py:319
msgid "Copper Growth"
msgstr ""

#: appGUI/preferences/tools/ToolsCalculatorsPrefGroupUI.py:137
#: appTools/ToolCalculators.py:326
msgid ""
"How thick the copper growth is intended to be.\n"
"In microns."
msgstr ""

#: appGUI/preferences/tools/ToolsCornersPrefGroupUI.py:27
msgid "Corner Markers Options"
msgstr ""

#: appGUI/preferences/tools/ToolsCornersPrefGroupUI.py:44 appTools/ToolCorners.py:386
msgid "The thickness of the line that makes the corner marker."
msgstr ""

#: appGUI/preferences/tools/ToolsCornersPrefGroupUI.py:58 appTools/ToolCorners.py:400
msgid "The length of the line that makes the corner marker."
msgstr ""

#: appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:28
msgid "Cutout Tool Options"
msgstr ""

#: appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:34
msgid ""
"Create toolpaths to cut around\n"
"the PCB and separate it from\n"
"the original board."
msgstr ""

#: appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:45 appTools/ToolCutOut.py:1821
msgid ""
"Diameter of the tool used to cutout\n"
"the PCB shape out of the surrounding material."
msgstr ""

#: appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:100
msgid "Object kind"
msgstr ""

#: appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:102 appTools/ToolCutOut.py:1754
msgid ""
"Choice of what kind the object we want to cutout is.<BR>- <B>Single</B>: contain a single "
"PCB Gerber outline object.<BR>- <B>Panel</B>: a panel PCB Gerber object, which is made\n"
"out of many individual PCB outlines."
msgstr ""

#: appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:109 appTools/ToolCutOut.py:1760
msgid "Single"
msgstr ""

#: appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:110 appTools/ToolCutOut.py:1761
msgid "Panel"
msgstr ""

#: appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:211
msgid ""
"Number of gaps used for the cutout.\n"
"There can be maximum 8 bridges/gaps.\n"
"The choices are:\n"
"- None  - no gaps\n"
"- lr    - left + right\n"
"- tb    - top + bottom\n"
"- 4     - left + right +top + bottom\n"
"- 2lr   - 2*left + 2*right\n"
"- 2tb  - 2*top + 2*bottom\n"
"- 8     - 2*left + 2*right +2*top + 2*bottom"
msgstr ""

#: appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:240 appTools/ToolCutOut.py:2091
msgid "Big cursor"
msgstr ""

#: appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:242 appTools/ToolCutOut.py:2093
msgid "Use a big cursor when adding manual gaps."
msgstr ""

#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:27
msgid "Drilling Tool Options"
msgstr ""

#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:33 appTools/ToolDrilling.py:1992
#: appTools/ToolMilling.py:1611
msgid "Create CNCJob with toolpaths for drilling or milling holes."
msgstr ""

#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:41
#: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:54
#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:156
#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:142 appTools/ToolDrilling.py:2068
#: appTools/ToolIsolation.py:3020 appTools/ToolMilling.py:1687 appTools/ToolNCC.py:3819
#: appTools/ToolPaint.py:2842
msgid "Tool order"
msgstr ""

#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:42
#: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:55
#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:157
#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:167
#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:143 appTools/ToolDrilling.py:2069
#: appTools/ToolIsolation.py:3021 appTools/ToolMilling.py:1688 appTools/ToolNCC.py:3820
#: appTools/ToolNCC.py:3830 appTools/ToolPaint.py:2843 appTools/ToolPaint.py:2853
msgid ""
"This set the way that the tools in the tools table are used.\n"
"'No' --> means that the used order is the one in the tool table\n"
"'Forward' --> means that the tools will be ordered from small to big\n"
"'Reverse' --> means that the tools will ordered from big to small\n"
"\n"
"WARNING: using rest machining will automatically set the order\n"
"in reverse and disable this control."
msgstr ""

#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:50
#: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:63
#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:165
#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:151 appTools/ToolDrilling.py:2077
#: appTools/ToolIsolation.py:3029 appTools/ToolMilling.py:1696 appTools/ToolNCC.py:3828
#: appTools/ToolPaint.py:2851
msgid "Forward"
msgstr ""

#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:51
#: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:64
#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:166
#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:152 appTools/ToolDrilling.py:2078
#: appTools/ToolIsolation.py:3030 appTools/ToolMilling.py:1697 appTools/ToolNCC.py:3829
#: appTools/ToolPaint.py:2852
msgid "Reverse"
msgstr ""

#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:118 appTools/ToolDrilling.py:2373
#: appTools/ToolMilling.py:2065
msgid ""
"Include tool-change sequence\n"
"in G-Code (Pause for tool change)."
msgstr ""

#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:223
msgid ""
"The preprocessor JSON file that dictates\n"
"Gcode output."
msgstr ""

#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:239
msgid "Drilling Slots"
msgstr ""

#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:278
msgid "A list of advanced parameters."
msgstr ""

#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:296
msgid "Toolchange X,Y"
msgstr ""

#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:308 appTools/ToolDrilling.py:2403
#: appTools/ToolMilling.py:2089
msgid ""
"Height of the tool just after start.\n"
"Delete the value if you don't need this feature."
msgstr ""

#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:380
msgid "Fast Retract"
msgstr ""

#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:382
msgid ""
"Exit hole strategy.\n"
" - When uncheked, while exiting the drilled hole the drill bit\n"
"will travel slow, with set feedrate (G1), up to zero depth and then\n"
"travel as fast as possible (G0) to the Z Move (travel height).\n"
" - When checked the travel from Z cut (cut depth) to Z_move\n"
"(travel height) is done as fast as possible (G0) in one move."
msgstr ""

#: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:27
msgid "Film Tool Options"
msgstr ""

#: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:33
msgid ""
"Create a PCB film from a Gerber or Geometry object.\n"
"The file is saved in SVG format."
msgstr ""

#: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:43
msgid "Film Type"
msgstr ""

#: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:45 appTools/ToolFilm.py:1001
msgid ""
"Generate a Positive black film or a Negative film.\n"
"Positive means that it will print the features\n"
"with black on a white canvas.\n"
"Negative means that it will print the features\n"
"with white on a black canvas.\n"
"The Film format is SVG."
msgstr ""

#: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:56
msgid "Film Color"
msgstr ""

#: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:58
msgid "Set the film color when positive film is selected."
msgstr ""

#: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:71 appTools/ToolFilm.py:1017
msgid "Border"
msgstr ""

#: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:73 appTools/ToolFilm.py:1019
msgid ""
"Specify a border around the object.\n"
"Only for negative film.\n"
"It helps if we use as a Box Object the same \n"
"object as in Film Object. It will create a thick\n"
"black bar around the actual print allowing for a\n"
"better delimitation of the outline features which are of\n"
"white color like the rest and which may confound with the\n"
"surroundings if not for this border."
msgstr ""

#: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:90 appTools/ToolFilm.py:986
msgid "Scale Stroke"
msgstr ""

#: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:92 appTools/ToolFilm.py:988
msgid ""
"Scale the line stroke thickness of each feature in the SVG file.\n"
"It means that the line that envelope each SVG feature will be thicker or thinner,\n"
"therefore the fine features may be more affected by this parameter."
msgstr ""

#: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:99 appTools/ToolFilm.py:830
msgid "Film Adjustments"
msgstr ""

#: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:101 appTools/ToolFilm.py:832
msgid ""
"Sometime the printers will distort the print shape, especially the Laser types.\n"
"This section provide the tools to compensate for the print distortions."
msgstr ""

#: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:108 appTools/ToolFilm.py:839
msgid "Scale Film geometry"
msgstr ""

#: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:110 appTools/ToolFilm.py:841
msgid ""
"A value greater than 1 will stretch the film\n"
"while a value less than 1 will jolt it."
msgstr ""

#: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:139 appTools/ToolFilm.py:883
msgid "Skew Film geometry"
msgstr ""

#: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:141 appTools/ToolFilm.py:885
msgid ""
"Positive values will skew to the right\n"
"while negative values will skew to the left."
msgstr ""

#: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:171 appTools/ToolFilm.py:915
msgid ""
"The reference point to be used as origin for the skew.\n"
"It can be one of the four points of the geometry bounding box."
msgstr ""

#: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:174 appTools/ToolCorners.py:342
#: appTools/ToolFiducials.py:694 appTools/ToolFilm.py:918
msgid "Bottom Left"
msgstr ""

#: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:175 appTools/ToolCorners.py:350
#: appTools/ToolFilm.py:919
msgid "Top Left"
msgstr ""

#: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:176 appTools/ToolCorners.py:346
#: appTools/ToolFilm.py:920
msgid "Bottom Right"
msgstr ""

#: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:177 appTools/ToolFilm.py:921
msgid "Top right"
msgstr ""

#: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:185 appTools/ToolFilm.py:944
msgid "Mirror Film geometry"
msgstr ""

#: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:187 appTools/ToolFilm.py:946
msgid "Mirror the film geometry on the selected axis or on both."
msgstr ""

#: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:201 appTools/ToolFilm.py:960
msgid "Mirror axis"
msgstr ""

#: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:211 appTools/ToolFilm.py:1106
msgid "SVG"
msgstr ""

#: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:212 appTools/ToolFilm.py:1107
msgid "PNG"
msgstr ""

#: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:213 appTools/ToolFilm.py:1108
msgid "PDF"
msgstr ""

#: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:216 appTools/ToolFilm.py:999
#: appTools/ToolFilm.py:1111
msgid "Film Type:"
msgstr ""

#: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:218 appTools/ToolFilm.py:1113
msgid ""
"The file type of the saved film. Can be:\n"
"- 'SVG' -> open-source vectorial format\n"
"- 'PNG' -> raster image\n"
"- 'PDF' -> portable document format"
msgstr ""

#: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:227 appTools/ToolFilm.py:1122
msgid "Page Orientation"
msgstr ""

#: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:240 appTools/ToolFilm.py:1135
msgid "Page Size"
msgstr ""

#: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:241 appTools/ToolFilm.py:1136
msgid "A selection of standard ISO 216 page sizes."
msgstr ""

#: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:26
msgid "Isolation Tool Options"
msgstr ""

#: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:48
#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:49
#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:57
msgid "Comma separated values"
msgstr ""

#: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:72
#: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:80
#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:55
#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:63
#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:64
msgid ""
"Default tool type:\n"
"- 'V-shape'\n"
"- Circular"
msgstr ""

#: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:77
#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:60
#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:69
msgid "V-shape"
msgstr ""

#: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:103
msgid ""
"The tip angle for V-Shape Tool.\n"
"In degrees."
msgstr ""

#: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:117
#: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:126
#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:100
#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:109
msgid ""
"Depth of cut into material. Negative value.\n"
"In FlatCAM units."
msgstr ""

#: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:136
#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:119
#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:125 appTools/ToolIsolation.py:3055
#: appTools/ToolNCC.py:3860 appTools/ToolPaint.py:2883
msgid ""
"Diameter for the new tool to add in the Tool Table.\n"
"If the tool is V-shape type then this value is automatically\n"
"calculated from the other parameters."
msgstr ""

#: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:243
#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:288
#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:244
#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:245 appTools/ToolIsolation.py:3241
#: appTools/ToolNCC.py:4108 appTools/ToolPaint.py:3067
msgid "Rest"
msgstr ""

#: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:246 appTools/ToolIsolation.py:3244
msgid ""
"If checked, use 'rest machining'.\n"
"Basically it will isolate outside PCB features,\n"
"using the biggest tool and continue with the next tools,\n"
"from bigger to smaller, to isolate the copper features that\n"
"could not be cleared by previous tool, until there is\n"
"no more copper features to isolate or there are no more tools.\n"
"If not checked, use the standard algorithm."
msgstr ""

#: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:258 appTools/ToolIsolation.py:3266
msgid "Combine"
msgstr ""

#: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:260 appTools/ToolIsolation.py:3268
msgid "Combine all passes into one object"
msgstr ""

#: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:267 appTools/ToolIsolation.py:3275
msgid "Except"
msgstr ""

#: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:268 appTools/ToolIsolation.py:3276
msgid ""
"When the isolation geometry is generated,\n"
"by checking this, the area of the object below\n"
"will be subtracted from the isolation geometry."
msgstr ""

#: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:277 appTools/ToolIsolation.py:3315
msgid ""
"Isolation scope. Choose what to isolate:\n"
"- 'All' -> Isolate all the polygons in the object\n"
"- 'Area Selection' -> Isolate polygons within a selection area.\n"
"- 'Polygon Selection' -> Isolate a selection of polygons.\n"
"- 'Reference Object' - will process the area specified by another object."
msgstr ""

#: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:285
#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:280 appTools/ToolIsolation.py:825
#: appTools/ToolIsolation.py:1416 appTools/ToolIsolation.py:3323 appTools/ToolPaint.py:1037
#: appTools/ToolPaint.py:3125 appTools/ToolPaint.py:3241 tclCommands/TclCommandPaint.py:164
msgid "Polygon Selection"
msgstr ""

#: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:305 appTools/ToolIsolation.py:3359
msgid "Interiors"
msgstr ""

#: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:307 appTools/ToolIsolation.py:3361
msgid ""
"When checked the user can select interiors of a polygon.\n"
"(holes in the polygon)."
msgstr ""

#: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:312 appTools/ToolIsolation.py:3256
msgid "Forced Rest"
msgstr ""

#: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:314 appTools/ToolIsolation.py:3258
msgid ""
"When checked the isolation will be done with the current tool even if\n"
"interiors of a polygon (holes in the polygon) could not be isolated.\n"
"Works when 'rest machining' is used."
msgstr ""

#: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:327
#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:339
#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:303
msgid "Normal"
msgstr ""

#: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:328
#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:340
#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:304
msgid "Progressive"
msgstr ""

#: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:329
#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:341
#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:305 appObjects/AppObject.py:439
#: appObjects/FlatCAMObj.py:255 appObjects/FlatCAMObj.py:286 appObjects/FlatCAMObj.py:302
#: appObjects/FlatCAMObj.py:382 appTools/ToolCopperThieving.py:1038
#: appTools/ToolCorners.py:263 appTools/ToolFiducials.py:530 appTools/ToolMove.py:229
#: appTools/ToolQRCode.py:460 app_Main.py:4676
msgid "Plotting"
msgstr ""

#: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:331
#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:343
#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:307
msgid ""
"- 'Normal' -  normal plotting, done at the end of the job\n"
"- 'Progressive' - each shape is plotted after it is generated"
msgstr ""

#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:27
msgid "NCC Tool Options"
msgstr ""

#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:33
msgid ""
"Create a Geometry object with\n"
"toolpaths to cut all non-copper regions."
msgstr ""

#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:266
msgid "Offset value"
msgstr ""

#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:268
msgid ""
"If used, it will add an offset to the copper features.\n"
"The copper clearing will finish to a distance\n"
"from the copper features.\n"
"The value can be between 0.0 and 9999.9 FlatCAM units."
msgstr ""

#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:290 appTools/ToolNCC.py:4112
msgid ""
"If checked, use 'rest machining'.\n"
"Basically it will clear copper outside PCB features,\n"
"using the biggest tool and continue with the next tools,\n"
"from bigger to smaller, to clear areas of copper that\n"
"could not be cleared by previous tool, until there is\n"
"no more copper to clear or there are no more tools.\n"
"If not checked, use the standard algorithm."
msgstr ""

#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:313 appTools/ToolNCC.py:4192
msgid ""
"Selection of area to be processed.\n"
"- 'Itself' - the processing extent is based on the object that is processed.\n"
" - 'Area Selection' - left mouse click to start selection of the area to be processed.\n"
"- 'Reference Object' - will process the area specified by another object."
msgstr ""

#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:27
msgid "Paint Tool Options"
msgstr ""

#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:33
msgid "<b>Parameters:</b>"
msgstr ""

#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:107
#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:116
msgid ""
"Depth of cut into material. Negative value.\n"
"In application units."
msgstr ""

#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:247 appTools/ToolPaint.py:3070
msgid ""
"If checked, use 'rest machining'.\n"
"Basically it will clear copper outside PCB features,\n"
"using the biggest tool and continue with the next tools,\n"
"from bigger to smaller, to clear areas of copper that\n"
"could not be cleared by previous tool, until there is\n"
"no more copper to clear or there are no more tools.\n"
"\n"
"If not checked, use the standard algorithm."
msgstr ""

#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:260 appTools/ToolPaint.py:3097
msgid ""
"Selection of area to be processed.\n"
"- 'Polygon Selection' - left mouse click to add/remove polygons to be processed.\n"
"- 'Area Selection' - left mouse click to start selection of the area to be processed.\n"
"Keeping a modifier key pressed (CTRL or SHIFT) will allow to add multiple areas.\n"
"- 'All Polygons' - the process will start after click.\n"
"- 'Reference Object' - will process the area specified by another object."
msgstr ""

#: appGUI/preferences/tools/ToolsPanelizePrefGroupUI.py:27
msgid "Panelize Tool Options"
msgstr ""

#: appGUI/preferences/tools/ToolsPanelizePrefGroupUI.py:33
msgid ""
"Create an object that contains an array of (x, y) elements,\n"
"each element is a copy of the source object spaced\n"
"at a X distance, Y distance of each other."
msgstr ""

#: appGUI/preferences/tools/ToolsPanelizePrefGroupUI.py:50 appTools/ToolPanelize.py:764
msgid "Spacing cols"
msgstr ""

#: appGUI/preferences/tools/ToolsPanelizePrefGroupUI.py:52 appTools/ToolPanelize.py:766
msgid ""
"Spacing between columns of the desired panel.\n"
"In current units."
msgstr ""

#: appGUI/preferences/tools/ToolsPanelizePrefGroupUI.py:64 appTools/ToolPanelize.py:776
msgid "Spacing rows"
msgstr ""

#: appGUI/preferences/tools/ToolsPanelizePrefGroupUI.py:66 appTools/ToolPanelize.py:778
msgid ""
"Spacing between rows of the desired panel.\n"
"In current units."
msgstr ""

#: appGUI/preferences/tools/ToolsPanelizePrefGroupUI.py:79 appTools/ToolPanelize.py:789
msgid "Number of columns of the desired panel"
msgstr ""

#: appGUI/preferences/tools/ToolsPanelizePrefGroupUI.py:91 appTools/ToolPanelize.py:799
msgid "Number of rows of the desired panel"
msgstr ""

#: appGUI/preferences/tools/ToolsPanelizePrefGroupUI.py:97
#: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:76 appTools/ToolAlignObjects.py:398
#: appTools/ToolAlignObjects.py:434 appTools/ToolCalibration.py:163
#: appTools/ToolCalibration.py:171 appTools/ToolCalibration.py:891
#: appTools/ToolCalibration.py:1326 appTools/ToolCalibration.py:1343
#: appTools/ToolCopperThieving.py:163 appTools/ToolCopperThieving.py:1237
#: appTools/ToolCopperThieving.py:1251 appTools/ToolCutOut.py:1768
#: appTools/ToolDblSided.py:528 appTools/ToolDblSided.py:772 appTools/ToolFilm.py:781
#: appTools/ToolFilm.py:804 appTools/ToolImage.py:117 appTools/ToolImage.py:138
#: appTools/ToolImage.py:191 appTools/ToolIsolation.py:796 appTools/ToolIsolation.py:3284
#: appTools/ToolIsolation.py:3336 appTools/ToolNCC.py:792 appTools/ToolNCC.py:3741
#: appTools/ToolNCC.py:4209 appTools/ToolPaint.py:167 appTools/ToolPaint.py:3141
#: appTools/ToolPanelize.py:147 appTools/ToolPanelize.py:167 appTools/ToolPanelize.py:715
#: appTools/ToolPanelize.py:809 appTools/ToolTransform.py:126 appTools/ToolTransform.py:585
#: defaults.py:558
msgid "Gerber"
msgstr ""

#: appGUI/preferences/tools/ToolsPanelizePrefGroupUI.py:98 appTools/ToolPanelize.py:810
msgid "Geo"
msgstr ""

#: appGUI/preferences/tools/ToolsPanelizePrefGroupUI.py:99 appTools/ToolPanelize.py:811
msgid "Panel Type"
msgstr ""

#: appGUI/preferences/tools/ToolsPanelizePrefGroupUI.py:101
msgid ""
"Choose the type of object for the panel object:\n"
"- Gerber\n"
"- Geometry"
msgstr ""

#: appGUI/preferences/tools/ToolsPanelizePrefGroupUI.py:112 appTools/ToolPanelize.py:823
msgid ""
"Active only for Geometry panel type.\n"
"When checked the application will find\n"
"any two overlapping Line elements in the panel\n"
"and remove the overlapping parts, keeping only one of them."
msgstr ""

#: appGUI/preferences/tools/ToolsPanelizePrefGroupUI.py:120
msgid "Constrain within"
msgstr ""

#: appGUI/preferences/tools/ToolsPanelizePrefGroupUI.py:122 appTools/ToolPanelize.py:833
msgid ""
"Area define by DX and DY within to constrain the panel.\n"
"DX and DY values are in current units.\n"
"Regardless of how many columns and rows are desired,\n"
"the final panel will have as many columns and rows as\n"
"they fit completely within selected area."
msgstr ""

#: appGUI/preferences/tools/ToolsPanelizePrefGroupUI.py:135 appTools/ToolPanelize.py:845
msgid "Width (DX)"
msgstr ""

#: appGUI/preferences/tools/ToolsPanelizePrefGroupUI.py:137 appTools/ToolPanelize.py:847
msgid ""
"The width (DX) within which the panel must fit.\n"
"In current units."
msgstr ""

#: appGUI/preferences/tools/ToolsPanelizePrefGroupUI.py:148 appTools/ToolPanelize.py:856
msgid "Height (DY)"
msgstr ""

#: appGUI/preferences/tools/ToolsPanelizePrefGroupUI.py:150 appTools/ToolPanelize.py:858
msgid ""
"The height (DY)within which the panel must fit.\n"
"In current units."
msgstr ""

#: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:27
msgid "SolderPaste Tool Options"
msgstr ""

#: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:33
msgid ""
"A tool to create GCode for dispensing\n"
"solder paste onto a PCB."
msgstr ""

#: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:54
msgid "New Nozzle Dia"
msgstr ""

#: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:56
#: appTools/ToolSolderPaste.py:1188
msgid "Diameter for the new Nozzle tool to add in the Tool Table"
msgstr ""

#: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:72
#: appTools/ToolSolderPaste.py:1255
msgid "Z Dispense Start"
msgstr ""

#: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:74
#: appTools/ToolSolderPaste.py:1257
msgid "The height (Z) when solder paste dispensing starts."
msgstr ""

#: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:85
#: appTools/ToolSolderPaste.py:1267
msgid "Z Dispense"
msgstr ""

#: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:87
#: appTools/ToolSolderPaste.py:1269
msgid "The height (Z) when doing solder paste dispensing."
msgstr ""

#: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:98
#: appTools/ToolSolderPaste.py:1279
msgid "Z Dispense Stop"
msgstr ""

#: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:100
#: appTools/ToolSolderPaste.py:1281
msgid "The height (Z) when solder paste dispensing stops."
msgstr ""

#: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:111
#: appTools/ToolSolderPaste.py:1291
msgid "Z Travel"
msgstr ""

#: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:113
#: appTools/ToolSolderPaste.py:1293
msgid ""
"The height (Z) for travel between pads\n"
"(without dispensing solder paste)."
msgstr ""

#: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:125
#: appTools/ToolSolderPaste.py:1304
msgid "Z Toolchange"
msgstr ""

#: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:127
#: appTools/ToolSolderPaste.py:1306
msgid "The height (Z) for tool (nozzle) change."
msgstr ""

#: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:136
#: appTools/ToolSolderPaste.py:1314
msgid ""
"The X,Y location for tool (nozzle) change.\n"
"The format is (x, y) where x and y are real numbers."
msgstr ""

#: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:150
#: appTools/ToolSolderPaste.py:1327
msgid "Feedrate (speed) while moving on the X-Y plane."
msgstr ""

#: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:163
#: appTools/ToolSolderPaste.py:1339
msgid ""
"Feedrate (speed) while moving vertically\n"
"(on Z plane)."
msgstr ""

#: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:175
#: appTools/ToolSolderPaste.py:1350
msgid "Feedrate Z Dispense"
msgstr ""

#: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:177
msgid ""
"Feedrate (speed) while moving up vertically\n"
"to Dispense position (on Z plane)."
msgstr ""

#: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:188
#: appTools/ToolSolderPaste.py:1362
msgid "Spindle Speed FWD"
msgstr ""

#: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:190
#: appTools/ToolSolderPaste.py:1364
msgid ""
"The dispenser speed while pushing solder paste\n"
"through the dispenser nozzle."
msgstr ""

#: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:202
#: appTools/ToolSolderPaste.py:1375
msgid "Dwell FWD"
msgstr ""

#: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:204
#: appTools/ToolSolderPaste.py:1377
msgid "Pause after solder dispensing."
msgstr ""

#: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:214
#: appTools/ToolSolderPaste.py:1386
msgid "Spindle Speed REV"
msgstr ""

#: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:216
#: appTools/ToolSolderPaste.py:1388
msgid ""
"The dispenser speed while retracting solder paste\n"
"through the dispenser nozzle."
msgstr ""

#: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:228
#: appTools/ToolSolderPaste.py:1399
msgid "Dwell REV"
msgstr ""

#: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:230
#: appTools/ToolSolderPaste.py:1401
msgid ""
"Pause after solder paste dispenser retracted,\n"
"to allow pressure equilibrium."
msgstr ""

#: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:239
#: appTools/ToolSolderPaste.py:1409
msgid "Files that control the GCode generation."
msgstr ""

#: appGUI/preferences/tools/ToolsSubPrefGroupUI.py:27
msgid "Substractor Tool Options"
msgstr ""

#: appGUI/preferences/tools/ToolsSubPrefGroupUI.py:33
msgid ""
"A tool to substract one Gerber or Geometry object\n"
"from another of the same type."
msgstr ""

#: appGUI/preferences/tools/ToolsSubPrefGroupUI.py:38 appTools/ToolSub.py:731
msgid "Close paths"
msgstr ""

#: appGUI/preferences/tools/ToolsSubPrefGroupUI.py:39
msgid "Checking this will close the paths cut by the Geometry substractor object."
msgstr ""

#: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:27
msgid "Transform Tool Options"
msgstr ""

#: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:33
msgid ""
"Various transformations that can be applied\n"
"on a application object."
msgstr ""

#: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:46 appTools/ToolTransform.py:549
msgid ""
"The reference point for Rotate, Skew, Scale, Mirror.\n"
"Can be:\n"
"- Origin -> it is the 0, 0 point\n"
"- Selection -> the center of the bounding box of the selected objects\n"
"- Point -> a custom point defined by X,Y coordinates\n"
"- Object -> the center of the bounding box of a specific object"
msgstr ""

#: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:72 appTools/ToolTransform.py:581
msgid "The type of object used as reference."
msgstr ""

#: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:107
msgid "Skew"
msgstr ""

#: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:126
#: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:140
#: appTools/ToolCalibration.py:1200 appTools/ToolCalibration.py:1213
msgid ""
"Angle for Skew action, in degrees.\n"
"Float number between -360 and 359."
msgstr ""

#: appGUI/preferences/utilities/AutoCompletePrefGroupUI.py:27
msgid "Autocompleter Keywords"
msgstr ""

#: appGUI/preferences/utilities/AutoCompletePrefGroupUI.py:30
#: appGUI/preferences/utilities/FAExcPrefGroupUI.py:40
#: appGUI/preferences/utilities/FAGcoPrefGroupUI.py:30
#: appGUI/preferences/utilities/FAGrbPrefGroupUI.py:30
msgid "Restore"
msgstr ""

#: appGUI/preferences/utilities/AutoCompletePrefGroupUI.py:31
msgid "Restore the autocompleter keywords list to the default state."
msgstr ""

#: appGUI/preferences/utilities/AutoCompletePrefGroupUI.py:33
msgid "Delete all autocompleter keywords from the list."
msgstr ""

#: appGUI/preferences/utilities/AutoCompletePrefGroupUI.py:41
msgid "Keywords list"
msgstr ""

#: appGUI/preferences/utilities/AutoCompletePrefGroupUI.py:43
msgid ""
"List of keywords used by\n"
"the autocompleter in FlatCAM.\n"
"The autocompleter is installed\n"
"in the Code Editor and for the Tcl Shell."
msgstr ""

#: appGUI/preferences/utilities/AutoCompletePrefGroupUI.py:64
#: appGUI/preferences/utilities/FAExcPrefGroupUI.py:73
#: appGUI/preferences/utilities/FAGcoPrefGroupUI.py:63
#: appGUI/preferences/utilities/FAGrbPrefGroupUI.py:62
msgid "Extension"
msgstr ""

#: appGUI/preferences/utilities/AutoCompletePrefGroupUI.py:65
msgid "A keyword to be added or deleted to the list."
msgstr ""

#: appGUI/preferences/utilities/AutoCompletePrefGroupUI.py:73
msgid "Add keyword"
msgstr ""

#: appGUI/preferences/utilities/AutoCompletePrefGroupUI.py:74
msgid "Add a keyword to the list"
msgstr ""

#: appGUI/preferences/utilities/AutoCompletePrefGroupUI.py:75
msgid "Delete keyword"
msgstr ""

#: appGUI/preferences/utilities/AutoCompletePrefGroupUI.py:76
msgid "Delete a keyword from the list"
msgstr ""

#: appGUI/preferences/utilities/FAExcPrefGroupUI.py:27
msgid "Excellon File associations"
msgstr ""

#: appGUI/preferences/utilities/FAExcPrefGroupUI.py:41
#: appGUI/preferences/utilities/FAGcoPrefGroupUI.py:31
#: appGUI/preferences/utilities/FAGrbPrefGroupUI.py:31
msgid "Restore the extension list to the default state."
msgstr ""

#: appGUI/preferences/utilities/FAExcPrefGroupUI.py:43
#: appGUI/preferences/utilities/FAGcoPrefGroupUI.py:33
#: appGUI/preferences/utilities/FAGrbPrefGroupUI.py:33
msgid "Delete all extensions from the list."
msgstr ""

#: appGUI/preferences/utilities/FAExcPrefGroupUI.py:51
#: appGUI/preferences/utilities/FAGcoPrefGroupUI.py:41
#: appGUI/preferences/utilities/FAGrbPrefGroupUI.py:41
msgid "Extensions list"
msgstr ""

#: appGUI/preferences/utilities/FAExcPrefGroupUI.py:53
#: appGUI/preferences/utilities/FAGcoPrefGroupUI.py:43
#: appGUI/preferences/utilities/FAGrbPrefGroupUI.py:43
msgid ""
"List of file extensions to be\n"
"associated with FlatCAM."
msgstr ""

#: appGUI/preferences/utilities/FAExcPrefGroupUI.py:74
#: appGUI/preferences/utilities/FAGcoPrefGroupUI.py:64
#: appGUI/preferences/utilities/FAGrbPrefGroupUI.py:63
msgid "A file extension to be added or deleted to the list."
msgstr ""

#: appGUI/preferences/utilities/FAExcPrefGroupUI.py:82
#: appGUI/preferences/utilities/FAGcoPrefGroupUI.py:72
#: appGUI/preferences/utilities/FAGrbPrefGroupUI.py:71
msgid "Add Extension"
msgstr ""

#: appGUI/preferences/utilities/FAExcPrefGroupUI.py:83
#: appGUI/preferences/utilities/FAGcoPrefGroupUI.py:73
#: appGUI/preferences/utilities/FAGrbPrefGroupUI.py:72
msgid "Add a file extension to the list"
msgstr ""

#: appGUI/preferences/utilities/FAExcPrefGroupUI.py:84
#: appGUI/preferences/utilities/FAGcoPrefGroupUI.py:74
#: appGUI/preferences/utilities/FAGrbPrefGroupUI.py:73
msgid "Delete Extension"
msgstr ""

#: appGUI/preferences/utilities/FAExcPrefGroupUI.py:85
#: appGUI/preferences/utilities/FAGcoPrefGroupUI.py:75
#: appGUI/preferences/utilities/FAGrbPrefGroupUI.py:74
msgid "Delete a file extension from the list"
msgstr ""

#: appGUI/preferences/utilities/FAExcPrefGroupUI.py:92
#: appGUI/preferences/utilities/FAGcoPrefGroupUI.py:82
#: appGUI/preferences/utilities/FAGrbPrefGroupUI.py:81
msgid "Apply Association"
msgstr ""

#: appGUI/preferences/utilities/FAExcPrefGroupUI.py:93
#: appGUI/preferences/utilities/FAGcoPrefGroupUI.py:83
#: appGUI/preferences/utilities/FAGrbPrefGroupUI.py:82
msgid ""
"Apply the file associations between\n"
"FlatCAM and the files with above extensions.\n"
"They will be active after next logon.\n"
"This work only in Windows."
msgstr ""

#: appGUI/preferences/utilities/FAGcoPrefGroupUI.py:27
msgid "GCode File associations"
msgstr ""

#: appGUI/preferences/utilities/FAGrbPrefGroupUI.py:27
msgid "Gerber File associations"
msgstr ""

#: appObjects/AppObject.py:157
#, python-brace-format
msgid ""
"Object ({kind}) failed because: {error} \n"
"\n"
msgstr ""

#: appObjects/AppObject.py:176
msgid "Converting units to "
msgstr ""

#: appObjects/AppObject.py:248 appObjects/FlatCAMGeometry.py:128
#: appObjects/FlatCAMGeometry.py:514 appObjects/FlatCAMGeometry.py:991
#: appObjects/FlatCAMGerber.py:522 appObjects/FlatCAMGerber.py:665
#: appTools/ToolCutOut.py:440 appTools/ToolIsolation.py:1585 appTools/ToolIsolation.py:1747
#: appTools/ToolIsolation.py:1940 camlib.py:1173 camlib.py:1234
msgid "Rough"
msgstr ""

#: appObjects/AppObject.py:302
msgid "CREATE A NEW FLATCAM TCL SCRIPT"
msgstr ""

#: appObjects/AppObject.py:303
msgid "TCL Tutorial is here"
msgstr ""

#: appObjects/AppObject.py:305
msgid "FlatCAM commands list"
msgstr ""

#: appObjects/AppObject.py:306
msgid ""
"Type >help< followed by Run Code for a list of FlatCAM Tcl Commands (displayed in Tcl "
"Shell)."
msgstr ""

#: appObjects/AppObject.py:357 appObjects/AppObject.py:363 appObjects/AppObject.py:369
#: appObjects/AppObject.py:375 appObjects/AppObject.py:381 appObjects/AppObject.py:387
msgid "created/selected"
msgstr ""

#: appObjects/FlatCAMCNCJob.py:618 appObjects/FlatCAMDocument.py:71
#: appObjects/FlatCAMScript.py:82
msgid "<span style=\"color:green;\"><b>Basic</b></span>"
msgstr ""

#: appObjects/FlatCAMCNCJob.py:625 appObjects/FlatCAMDocument.py:75
#: appObjects/FlatCAMScript.py:86
msgid "<span style=\"color:red;\"><b>Advanced</b></span>"
msgstr ""

#: appObjects/FlatCAMCNCJob.py:740
msgid "Click on canvas to add a Probe Point..."
msgstr ""

#: appObjects/FlatCAMCNCJob.py:926
msgid "Added a Probe Point... Click again to add another or right click to finish ..."
msgstr ""

#: appObjects/FlatCAMCNCJob.py:948
msgid "Finished adding Probe Points..."
msgstr ""

#: appObjects/FlatCAMCNCJob.py:1117
msgid "COM list updated ..."
msgstr ""

#: appObjects/FlatCAMCNCJob.py:1153
msgid "Connected"
msgstr ""

#: appObjects/FlatCAMCNCJob.py:1164
msgid "Port connected"
msgstr ""

#: appObjects/FlatCAMCNCJob.py:1168
msgid "Could not connect to GRBL on port"
msgstr ""

#: appObjects/FlatCAMCNCJob.py:1185
msgid "Port is connected. Disconnecting"
msgstr ""

#: appObjects/FlatCAMCNCJob.py:1187
msgid "Could not connect to port"
msgstr ""

#: appObjects/FlatCAMCNCJob.py:1217 appObjects/FlatCAMCNCJob.py:1634
msgid "Sending GCode..."
msgstr ""

#: appObjects/FlatCAMCNCJob.py:1346
msgid "GRBL is doing a home cycle."
msgstr ""

#: appObjects/FlatCAMCNCJob.py:1352
msgid "GRBL software reset was sent."
msgstr ""

#: appObjects/FlatCAMCNCJob.py:1360
msgid "GRBL resumed."
msgstr ""

#: appObjects/FlatCAMCNCJob.py:1364
msgid "GRBL paused."
msgstr ""

#: appObjects/FlatCAMCNCJob.py:1493 appObjects/FlatCAMCNCJob.py:1728
#: appTools/ToolSolderPaste.py:1066
msgid "Export cancelled ..."
msgstr ""

#: appObjects/FlatCAMCNCJob.py:1517 appObjects/FlatCAMCNCJob.py:1764
#: appObjects/FlatCAMScript.py:134 app_Main.py:7807
msgid "Loading..."
msgstr ""

#: appObjects/FlatCAMCNCJob.py:1521
msgid "There is nothing to view"
msgstr ""

#: appObjects/FlatCAMCNCJob.py:1527
msgid "Code Viewer"
msgstr ""

#: appObjects/FlatCAMCNCJob.py:1565
msgid "Loaded Machine Code into Code Viewer"
msgstr ""

#: appObjects/FlatCAMCNCJob.py:1611
msgid "Failed to open height map file"
msgstr ""

#: appObjects/FlatCAMCNCJob.py:1660
msgid "Finished probing. Doing the autolevelling."
msgstr ""

#: appObjects/FlatCAMCNCJob.py:1665
msgid "Sending probing GCode to the GRBL controller."
msgstr ""

#: appObjects/FlatCAMCNCJob.py:1670
msgid "Finished autolevelling."
msgstr ""

#: appObjects/FlatCAMCNCJob.py:1684
msgid "Plotting..."
msgstr ""

#: appObjects/FlatCAMCNCJob.py:1754
msgid "File saved to"
msgstr ""

#: appObjects/FlatCAMCNCJob.py:1778
msgid "Code Review"
msgstr ""

#: appObjects/FlatCAMCNCJob.py:1961
msgid "This CNCJob object can't be processed because it is a"
msgstr ""

#: appObjects/FlatCAMCNCJob.py:1963
msgid "CNCJob object"
msgstr ""

#: appObjects/FlatCAMCNCJob.py:2073
msgid ""
"G-code does not have a G94 code.\n"
"Append Code snippet will not be used.."
msgstr ""

#: appObjects/FlatCAMDocument.py:173
msgid "Document Editor"
msgstr ""

#: appObjects/FlatCAMExcellon.py:848 appObjects/FlatCAMExcellon.py:956
#: appTools/ToolDrilling.py:1598 appTools/ToolMilling.py:1038 appTools/ToolMilling.py:1154
#: appTools/ToolMilling.py:1340
msgid "Please select one or more tools from the list and try again."
msgstr ""

#: appObjects/FlatCAMExcellon.py:853 appTools/ToolMilling.py:1045
msgid "Milling tool for DRILLS is larger than hole size. Cancelled."
msgstr ""

#: appObjects/FlatCAMExcellon.py:876 appObjects/FlatCAMExcellon.py:976
#: appTools/ToolDrilling.py:1748 appTools/ToolDrilling.py:1813 appTools/ToolMilling.py:1071
#: appTools/ToolMilling.py:1175 appTools/ToolMilling.py:1360
#: tclCommands/TclCommandDrillcncjob.py:195
msgid "Tool_nr"
msgstr ""

#: appObjects/FlatCAMExcellon.py:876 appObjects/FlatCAMExcellon.py:976
#: appTools/ToolDrilling.py:1748 appTools/ToolDrilling.py:1813 appTools/ToolMilling.py:1071
#: appTools/ToolMilling.py:1175 appTools/ToolMilling.py:1360
#: tclCommands/TclCommandDrillcncjob.py:195
msgid "Drills_Nr"
msgstr ""

#: appObjects/FlatCAMExcellon.py:876 appObjects/FlatCAMExcellon.py:976
#: appTools/ToolDrilling.py:1748 appTools/ToolDrilling.py:1813 appTools/ToolMilling.py:1071
#: appTools/ToolMilling.py:1175 appTools/ToolMilling.py:1360
#: tclCommands/TclCommandDrillcncjob.py:195
msgid "Slots_Nr"
msgstr ""

#: appObjects/FlatCAMExcellon.py:965 appTools/ToolMilling.py:1163
msgid "Milling tool for SLOTS is larger than hole size. Cancelled."
msgstr ""

#: appObjects/FlatCAMGeometry.py:128 appObjects/FlatCAMGeometry.py:1372
#: appObjects/FlatCAMGeometry.py:1373 appObjects/FlatCAMGeometry.py:1382
msgid "Iso"
msgstr ""

#: appObjects/FlatCAMGeometry.py:128
msgid "Finish"
msgstr ""

#: appObjects/FlatCAMGeometry.py:388 appObjects/FlatCAMGeometry.py:829
#: appObjects/FlatCAMGeometry.py:892 appTools/ToolDrilling.py:704
#: appTools/ToolDrilling.py:976 appTools/ToolDrilling.py:1023 appTools/ToolIsolation.py:525
#: appTools/ToolIsolation.py:638 appTools/ToolIsolation.py:704 appTools/ToolMilling.py:628
#: appTools/ToolMilling.py:749 appTools/ToolMilling.py:794 appTools/ToolNCC.py:271
#: appTools/ToolNCC.py:337 appTools/ToolNCC.py:700 appTools/ToolPaint.py:252
#: appTools/ToolPaint.py:316 appTools/ToolPaint.py:654
msgid "Multiple Tools"
msgstr ""

#: appObjects/FlatCAMGeometry.py:549
msgid "Add from Tool DB"
msgstr ""

#: appObjects/FlatCAMGeometry.py:824 appObjects/FlatCAMGeometry.py:863
#: appTools/ToolDrilling.py:753 appTools/ToolDrilling.py:969 appTools/ToolDrilling.py:1007
#: appTools/ToolIsolation.py:633 appTools/ToolIsolation.py:668 appTools/ToolMilling.py:744
#: appTools/ToolMilling.py:779 appTools/ToolNCC.py:266 appTools/ToolNCC.py:301
#: appTools/ToolPaint.py:247 appTools/ToolPaint.py:282 app_Main.py:2188
msgid "No Tool Selected"
msgstr ""

#: appObjects/FlatCAMGeometry.py:1010
msgid "Tool added in Tool Table."
msgstr ""

#: appObjects/FlatCAMGeometry.py:1119 appObjects/FlatCAMGeometry.py:1128
msgid "Failed. Select a tool to copy."
msgstr ""

#: appObjects/FlatCAMGeometry.py:1157
msgid "Tool was copied in Tool Table."
msgstr ""

#: appObjects/FlatCAMGeometry.py:1187
msgid "Tool was edited in Tool Table."
msgstr ""

#: appObjects/FlatCAMGeometry.py:1216 appObjects/FlatCAMGeometry.py:1225
msgid "Failed. Select a tool to delete."
msgstr ""

#: appObjects/FlatCAMGeometry.py:1249
msgid "Tool was deleted in Tool Table."
msgstr ""

#: appObjects/FlatCAMGeometry.py:1286 appObjects/FlatCAMGeometry.py:1295
msgid ""
"Disabled because the tool is V-shape.\n"
"For V-shape tools the depth of cut is\n"
"calculated from other parameters like:\n"
"- 'V-tip Angle' -> angle at the tip of the tool\n"
"- 'V-tip Dia' -> diameter at the tip of the tool \n"
"- Tool Dia -> 'Dia' column found in the Tool Table\n"
"NB: a value of zero means that Tool Dia = 'V-tip Dia'"
msgstr ""

#: appObjects/FlatCAMGeometry.py:1710 appTools/ToolDrilling.py:1242
#: appTools/ToolMilling.py:1256
msgid "Focus Z"
msgstr ""

#: appObjects/FlatCAMGeometry.py:1729 appTools/ToolDrilling.py:1264
#: appTools/ToolMilling.py:1275
msgid "Laser Power"
msgstr ""

#: appObjects/FlatCAMGeometry.py:1782
msgid "This Geometry can't be processed because it is"
msgstr ""

#: appObjects/FlatCAMGeometry.py:1782
msgid "geometry"
msgstr ""

#: appObjects/FlatCAMGeometry.py:1813
msgid "Failed. No tool selected in the tool table ..."
msgstr ""

#: appObjects/FlatCAMGeometry.py:1913 appObjects/FlatCAMGeometry.py:2068
msgid ""
"Tool Offset is selected in Tool Table but no value is provided.\n"
"Add a Tool Offset or change the Offset Type."
msgstr ""

#: appObjects/FlatCAMGeometry.py:1981 appObjects/FlatCAMGeometry.py:2131
msgid "G-Code parsing in progress..."
msgstr ""

#: appObjects/FlatCAMGeometry.py:1983 appObjects/FlatCAMGeometry.py:2133
msgid "G-Code parsing finished..."
msgstr ""

#: appObjects/FlatCAMGeometry.py:1991
msgid "Finished G-Code processing"
msgstr ""

#: appObjects/FlatCAMGeometry.py:1993 appObjects/FlatCAMGeometry.py:2145
msgid "G-Code processing failed with error"
msgstr ""

#: appObjects/FlatCAMGeometry.py:2037 appTools/ToolSolderPaste.py:866
msgid "Cancelled. Empty file, it has no geometry"
msgstr ""

#: appObjects/FlatCAMGeometry.py:2143 appObjects/FlatCAMGeometry.py:2313
msgid "Finished G-Code processing..."
msgstr ""

#: appObjects/FlatCAMGeometry.py:2162 appObjects/FlatCAMGeometry.py:2166
#: appObjects/FlatCAMGeometry.py:2318 appTools/ToolDrilling.py:1946
#: appTools/ToolMilling.py:1417
msgid "Generating CNC Code"
msgstr ""

#: appObjects/FlatCAMGeometry.py:2164 appObjects/FlatCAMGeometry.py:2168
#: appObjects/FlatCAMGeometry.py:2320
msgid "CNCjob created"
msgstr ""

#: appObjects/FlatCAMGeometry.py:2351 appObjects/FlatCAMGeometry.py:2360
#: appParsers/ParseGerber.py:1953 appParsers/ParseGerber.py:1963
msgid "Scale factor has to be a number: integer or float."
msgstr ""

#: appObjects/FlatCAMGeometry.py:2423
msgid "Geometry Scale done."
msgstr ""

#: appObjects/FlatCAMGeometry.py:2440 appParsers/ParseGerber.py:2079
msgid ""
"An (x,y) pair of values are needed. Probable you entered only one value in the Offset "
"field."
msgstr ""

#: appObjects/FlatCAMGeometry.py:2496
msgid "Geometry Offset done."
msgstr ""

#: appObjects/FlatCAMGeometry.py:2525
msgid ""
"The Toolchange X,Y field in Edit -> Preferences has to be in the format (x, y)\n"
"but now there is only one value, not two."
msgstr ""

#: appObjects/FlatCAMGeometry.py:2628 appTools/ToolDrilling.py:1362
#: appTools/ToolMilling.py:1488
msgid "Delete failed. There are no exclusion areas to delete."
msgstr ""

#: appObjects/FlatCAMGeometry.py:2645 appTools/ToolDrilling.py:1379
#: appTools/ToolMilling.py:1505
msgid "Delete failed. Nothing is selected."
msgstr ""

#: appObjects/FlatCAMGerber.py:347 appTools/ToolIsolation.py:1302
msgid "Buffering solid geometry"
msgstr ""

#: appObjects/FlatCAMGerber.py:354 appTools/ToolIsolation.py:1324
msgid "Done"
msgstr ""

#: appObjects/FlatCAMGerber.py:380 appObjects/FlatCAMGerber.py:406
msgid "Operation could not be done."
msgstr ""

#: appObjects/FlatCAMGerber.py:538 appObjects/FlatCAMGerber.py:612
#: appTools/ToolIsolation.py:1545 appTools/ToolIsolation.py:1913 appTools/ToolNCC.py:1806
#: appTools/ToolNCC.py:2771 appTools/ToolNCC.py:3150
msgid "Isolation geometry could not be generated."
msgstr ""

#: appObjects/FlatCAMGerber.py:563 appObjects/FlatCAMGerber.py:690
#: appTools/ToolIsolation.py:1612 appTools/ToolIsolation.py:1808
#: appTools/ToolIsolation.py:1997
msgid "Isolation geometry created"
msgstr ""

#: appObjects/FlatCAMGerber.py:972
msgid "Plotting Apertures"
msgstr ""

#: appObjects/FlatCAMObj.py:241
msgid "Name changed from"
msgstr ""

#: appObjects/FlatCAMObj.py:241
msgid "to"
msgstr ""

#: appObjects/FlatCAMObj.py:252
msgid "Offsetting..."
msgstr ""

#: appObjects/FlatCAMObj.py:266 appObjects/FlatCAMObj.py:271
msgid "Scaling could not be executed."
msgstr ""

#: appObjects/FlatCAMObj.py:275 appObjects/FlatCAMObj.py:283
msgid "Scale done."
msgstr ""

#: appObjects/FlatCAMObj.py:281
msgid "Scaling..."
msgstr ""

#: appObjects/FlatCAMObj.py:299
msgid "Skewing..."
msgstr ""

#: appObjects/FlatCAMScript.py:160
msgid "Script Editor"
msgstr ""

#: appObjects/ObjectCollection.py:519
#, python-brace-format
msgid "Object renamed from <b>{old}</b> to <b>{new}</b>"
msgstr ""

#: appObjects/ObjectCollection.py:933 appObjects/ObjectCollection.py:939
#: appObjects/ObjectCollection.py:945 appObjects/ObjectCollection.py:951
#: appObjects/ObjectCollection.py:957 appObjects/ObjectCollection.py:963 app_Main.py:6696
#: app_Main.py:6702 app_Main.py:6708 app_Main.py:6714
msgid "selected"
msgstr ""

#: appObjects/ObjectCollection.py:994
msgid "Cause of error"
msgstr ""

#: appObjects/ObjectCollection.py:1195
msgid "All objects are selected."
msgstr ""

#: appObjects/ObjectCollection.py:1205
msgid "Objects selection is cleared."
msgstr ""

#: appParsers/ParseExcellon.py:292
msgid "This is GCODE mark"
msgstr ""

#: appParsers/ParseExcellon.py:436
msgid ""
"No tool diameter info's. See shell.\n"
"A tool change event: T"
msgstr ""

#: appParsers/ParseExcellon.py:439
msgid ""
"was found but the Excellon file have no informations regarding the tool diameters "
"therefore the application will try to load it by using some 'fake' diameters.\n"
"The user needs to edit the resulting Excellon object and change the diameters to reflect "
"the real diameters."
msgstr ""

#: appParsers/ParseExcellon.py:975
msgid ""
"Excellon Parser error.\n"
"Parsing Failed. Line"
msgstr ""

#: appParsers/ParseFont.py:303
msgid "Font not supported, try another one."
msgstr ""

#: appParsers/ParseGerber.py:426
msgid "Gerber processing. Parsing"
msgstr ""

#: appParsers/ParseGerber.py:426 appParsers/ParseHPGL2.py:201
msgid "lines"
msgstr ""

#: appParsers/ParseGerber.py:1037 appParsers/ParseGerber.py:1137
#: appParsers/ParseHPGL2.py:294 appParsers/ParseHPGL2.py:308 appParsers/ParseHPGL2.py:327
#: appParsers/ParseHPGL2.py:351 appParsers/ParseHPGL2.py:386
msgid "Coordinates missing, line ignored"
msgstr ""

#: appParsers/ParseGerber.py:1039 appParsers/ParseGerber.py:1139
msgid "GERBER file might be CORRUPT. Check the file !!!"
msgstr ""

#: appParsers/ParseGerber.py:1093
msgid ""
"Region does not have enough points. File will be processed but there are parser errors. "
"Line number"
msgstr ""

#: appParsers/ParseGerber.py:1523 appParsers/ParseHPGL2.py:421
msgid "Gerber processing. Joining polygons"
msgstr ""

#: appParsers/ParseGerber.py:1541
msgid "Gerber processing. Applying Gerber polarity."
msgstr ""

#: appParsers/ParseGerber.py:1601
msgid "Gerber Line"
msgstr ""

#: appParsers/ParseGerber.py:1601
msgid "Gerber Line Content"
msgstr ""

#: appParsers/ParseGerber.py:1603
msgid "Gerber Parser ERROR"
msgstr ""

#: appParsers/ParseGerber.py:2043
msgid "Gerber Scale done."
msgstr ""

#: appParsers/ParseGerber.py:2135
msgid "Gerber Offset done."
msgstr ""

#: appParsers/ParseGerber.py:2211
msgid "Gerber Mirror done."
msgstr ""

#: appParsers/ParseGerber.py:2285
msgid "Gerber Skew done."
msgstr ""

#: appParsers/ParseGerber.py:2347
msgid "Gerber Rotate done."
msgstr ""

#: appParsers/ParseGerber.py:2504
msgid "Gerber Buffer done."
msgstr ""

#: appParsers/ParseHPGL2.py:201
msgid "HPGL2 processing. Parsing"
msgstr ""

#: appParsers/ParseHPGL2.py:433
msgid "HPGL2 Line"
msgstr ""

#: appParsers/ParseHPGL2.py:433
msgid "HPGL2 Line Content"
msgstr ""

#: appParsers/ParseHPGL2.py:434
msgid "HPGL2 Parser ERROR"
msgstr ""

#: appProcess.py:172
msgid "processes running."
msgstr ""

#: appTools/ToolAlignObjects.py:32 appTools/ToolAlignObjects.py:360
msgid "Align Objects"
msgstr ""

#: appTools/ToolAlignObjects.py:104
msgid "Align Tool"
msgstr ""

#: appTools/ToolAlignObjects.py:149
msgid "There is no aligned FlatCAM object selected..."
msgstr ""

#: appTools/ToolAlignObjects.py:159
msgid "There is no aligner FlatCAM object selected..."
msgstr ""

#: appTools/ToolAlignObjects.py:181 appTools/ToolAlignObjects.py:245
msgid "First Point"
msgstr ""

#: appTools/ToolAlignObjects.py:181 appTools/ToolAlignObjects.py:260
msgid "Click on the START point."
msgstr ""

#: appTools/ToolAlignObjects.py:240 appTools/ToolCalibration.py:276
#: appTools/ToolDblSided.py:285
msgid "Cancelled by user request."
msgstr ""

#: appTools/ToolAlignObjects.py:245 appTools/ToolAlignObjects.py:267
msgid "Click on the DESTINATION point."
msgstr ""

#: appTools/ToolAlignObjects.py:245 appTools/ToolAlignObjects.py:260
#: appTools/ToolAlignObjects.py:267
msgid "Or right click to cancel."
msgstr ""

#: appTools/ToolAlignObjects.py:260 appTools/ToolAlignObjects.py:267
#: appTools/ToolFiducials.py:718
msgid "Second Point"
msgstr ""

#: appTools/ToolAlignObjects.py:386
msgid "MOVING object"
msgstr ""

#: appTools/ToolAlignObjects.py:390
msgid ""
"Specify the type of object to be aligned.\n"
"It can be of type: Gerber or Excellon.\n"
"The selection here decide the type of objects that will be\n"
"in the Object combobox."
msgstr ""

#: appTools/ToolAlignObjects.py:411
msgid "Object to be aligned."
msgstr ""

#: appTools/ToolAlignObjects.py:423
msgid "DESTINATION object"
msgstr ""

#: appTools/ToolAlignObjects.py:425
msgid ""
"Specify the type of object to be aligned to.\n"
"It can be of type: Gerber or Excellon.\n"
"The selection here decide the type of objects that will be\n"
"in the Object combobox."
msgstr ""

#: appTools/ToolAlignObjects.py:447
msgid "Object to be aligned to. Aligner."
msgstr ""

#: appTools/ToolAlignObjects.py:460
msgid "Alignment Type"
msgstr ""

#: appTools/ToolAlignObjects.py:462
msgid ""
"The type of alignment can be:\n"
"- Single Point -> it require a single point of sync, the action will be a translation\n"
"- Dual Point -> it require two points of sync, the action will be translation followed by "
"rotation"
msgstr ""

#: appTools/ToolAlignObjects.py:468
msgid "Single Point"
msgstr ""

#: appTools/ToolAlignObjects.py:469
msgid "Dual Point"
msgstr ""

#: appTools/ToolAlignObjects.py:481
msgid "Align Object"
msgstr ""

#: appTools/ToolAlignObjects.py:483
msgid ""
"Align the specified object to the aligner object.\n"
"If only one point is used then it assumes translation.\n"
"If tho points are used it assume translation and rotation."
msgstr ""

#: appTools/ToolAlignObjects.py:498 appTools/ToolCalculators.py:372
#: appTools/ToolCalibration.py:1378 appTools/ToolCopperThieving.py:1577
#: appTools/ToolCorners.py:444 appTools/ToolCutOut.py:2152 appTools/ToolDblSided.py:947
#: appTools/ToolDrilling.py:2635 appTools/ToolEtchCompensation.py:458
#: appTools/ToolExtractDrills.py:702 appTools/ToolFiducials.py:932 appTools/ToolFilm.py:1222
#: appTools/ToolInvertGerber.py:286 appTools/ToolIsolation.py:3422
#: appTools/ToolMilling.py:2324 appTools/ToolNCC.py:4264 appTools/ToolOptimal.py:593
#: appTools/ToolPaint.py:3192 appTools/ToolPanelize.py:889 appTools/ToolPunchGerber.py:993
#: appTools/ToolQRCode.py:901 appTools/ToolRulesCheck.py:1618
#: appTools/ToolSolderPaste.py:1557 appTools/ToolSub.py:752 appTools/ToolTransform.py:920
msgid "Reset Tool"
msgstr ""

#: appTools/ToolAlignObjects.py:501 appTools/ToolCalculators.py:375
#: appTools/ToolCalibration.py:1381 appTools/ToolCopperThieving.py:1580
#: appTools/ToolCorners.py:447 appTools/ToolCutOut.py:2155 appTools/ToolDblSided.py:950
#: appTools/ToolDrilling.py:2638 appTools/ToolEtchCompensation.py:461
#: appTools/ToolExtractDrills.py:705 appTools/ToolFiducials.py:935 appTools/ToolFilm.py:1225
#: appTools/ToolInvertGerber.py:289 appTools/ToolIsolation.py:3425
#: appTools/ToolMilling.py:2327 appTools/ToolNCC.py:4267 appTools/ToolOptimal.py:596
#: appTools/ToolPaint.py:3195 appTools/ToolPanelize.py:892 appTools/ToolPunchGerber.py:996
#: appTools/ToolQRCode.py:904 appTools/ToolRulesCheck.py:1621
#: appTools/ToolSolderPaste.py:1560 appTools/ToolSub.py:755 appTools/ToolTransform.py:923
msgid "Will reset the tool parameters."
msgstr ""

#: appTools/ToolCalculators.py:77
msgid "Calc. Tool"
msgstr ""

#: appTools/ToolCalculators.py:151
msgid "Calculators"
msgstr ""

#: appTools/ToolCalculators.py:153
msgid "Units Calculator"
msgstr ""

#: appTools/ToolCalculators.py:196
msgid "Here you enter the value to be converted from INCH to MM"
msgstr ""

#: appTools/ToolCalculators.py:201
msgid "Here you enter the value to be converted from MM to INCH"
msgstr ""

#: appTools/ToolCalculators.py:237
msgid ""
"This is the angle of the tip of the tool.\n"
"It is specified by manufacturer."
msgstr ""

#: appTools/ToolCalculators.py:246
msgid ""
"This is the depth to cut into the material.\n"
"In the CNCJob is the CutZ parameter."
msgstr ""

#: appTools/ToolCalculators.py:254
msgid ""
"This is the tool diameter to be entered into\n"
"FlatCAM Gerber section.\n"
"In the CNCJob section it is called >Tool dia<."
msgstr ""

#: appTools/ToolCalculators.py:265 appTools/ToolCalculators.py:361
msgid "Calculate"
msgstr ""

#: appTools/ToolCalculators.py:268
msgid ""
"Calculate either the Cut Z or the effective tool diameter,\n"
"  depending on which is desired and which is known. "
msgstr ""

#: appTools/ToolCalculators.py:331
msgid "Current Value"
msgstr ""

#: appTools/ToolCalculators.py:338
msgid ""
"This is the current intensity value\n"
"to be set on the Power Supply. In Amps."
msgstr ""

#: appTools/ToolCalculators.py:342
msgid "Time"
msgstr ""

#: appTools/ToolCalculators.py:349
msgid ""
"This is the calculated time required for the procedure.\n"
"In minutes."
msgstr ""

#: appTools/ToolCalculators.py:364
msgid ""
"Calculate the current intensity value and the procedure time,\n"
"depending on the parameters above"
msgstr ""

#: appTools/ToolCalibration.py:156
msgid "Tool initialized"
msgstr ""

#: appTools/ToolCalibration.py:194
msgid "There is no source FlatCAM object selected..."
msgstr ""

#: appTools/ToolCalibration.py:215
msgid "Get First calibration point. Bottom Left..."
msgstr ""

#: appTools/ToolCalibration.py:282
msgid "Get Second calibration point. Bottom Right (Top Left)..."
msgstr ""

#: appTools/ToolCalibration.py:286
msgid "Get Third calibration point. Top Left (Bottom Right)..."
msgstr ""

#: appTools/ToolCalibration.py:290
msgid "Get Forth calibration point. Top Right..."
msgstr ""

#: appTools/ToolCalibration.py:294
msgid "Done. All four points have been acquired."
msgstr ""

#: appTools/ToolCalibration.py:325
msgid "Verification GCode for FlatCAM Calibration Tool"
msgstr ""

#: appTools/ToolCalibration.py:337 appTools/ToolCalibration.py:423
msgid "Gcode Viewer"
msgstr ""

#: appTools/ToolCalibration.py:353
msgid "Cancelled. Four points are needed for GCode generation."
msgstr ""

#: appTools/ToolCalibration.py:603 appTools/ToolCalibration.py:699
msgid "There is no FlatCAM object selected..."
msgstr ""

#: appTools/ToolCalibration.py:764
msgid "Parameters used when creating the GCode in this tool."
msgstr ""

#: appTools/ToolCalibration.py:868
msgid "STEP 1: Acquire Calibration Points"
msgstr ""

#: appTools/ToolCalibration.py:870
msgid ""
"Pick four points by clicking on canvas.\n"
"Those four points should be in the four\n"
"(as much as possible) corners of the object."
msgstr ""

#: appTools/ToolCalibration.py:888 appTools/ToolImage.py:196 appTools/ToolPanelize.py:676
#: appTools/ToolProperties.py:180
msgid "Object Type"
msgstr ""

#: appTools/ToolCalibration.py:905
msgid "Source object selection"
msgstr ""

#: appTools/ToolCalibration.py:907
msgid "FlatCAM Object to be used as a source for reference points."
msgstr ""

#: appTools/ToolCalibration.py:913
msgid "Calibration Points"
msgstr ""

#: appTools/ToolCalibration.py:915
msgid ""
"Contain the expected calibration points and the\n"
"ones measured."
msgstr ""

#: appTools/ToolCalibration.py:930 appTools/ToolSub.py:652 appTools/ToolSub.py:707
msgid "Target"
msgstr ""

#: appTools/ToolCalibration.py:931
msgid "Found Delta"
msgstr ""

#: appTools/ToolCalibration.py:943
msgid "Bot Left X"
msgstr ""

#: appTools/ToolCalibration.py:952
msgid "Bot Left Y"
msgstr ""

#: appTools/ToolCalibration.py:970
msgid "Bot Right X"
msgstr ""

#: appTools/ToolCalibration.py:980
msgid "Bot Right Y"
msgstr ""

#: appTools/ToolCalibration.py:995
msgid "Top Left X"
msgstr ""

#: appTools/ToolCalibration.py:1004
msgid "Top Left Y"
msgstr ""

#: appTools/ToolCalibration.py:1019
msgid "Top Right X"
msgstr ""

#: appTools/ToolCalibration.py:1029
msgid "Top Right Y"
msgstr ""

#: appTools/ToolCalibration.py:1062
msgid "Get Points"
msgstr ""

#: appTools/ToolCalibration.py:1064
msgid ""
"Pick four points by clicking on canvas if the source choice\n"
"is 'free' or inside the object geometry if the source is 'object'.\n"
"Those four points should be in the four squares of\n"
"the object."
msgstr ""

#: appTools/ToolCalibration.py:1085
msgid "STEP 2: Verification GCode"
msgstr ""

#: appTools/ToolCalibration.py:1087 appTools/ToolCalibration.py:1100
msgid ""
"Generate GCode file to locate and align the PCB by using\n"
"the four points acquired above.\n"
"The points sequence is:\n"
"- first point -> set the origin\n"
"- second point -> alignment point. Can be: top-left or bottom-right.\n"
"- third point -> check point. Can be: top-left or bottom-right.\n"
"- forth point -> final verification point. Just for evaluation."
msgstr ""

#: appTools/ToolCalibration.py:1098 appTools/ToolSolderPaste.py:1420
msgid "Generate GCode"
msgstr ""

#: appTools/ToolCalibration.py:1124
msgid "STEP 3: Adjustments"
msgstr ""

#: appTools/ToolCalibration.py:1126 appTools/ToolCalibration.py:1135
msgid ""
"Calculate Scale and Skew factors based on the differences (delta)\n"
"found when checking the PCB pattern. The differences must be filled\n"
"in the fields Found (Delta)."
msgstr ""

#: appTools/ToolCalibration.py:1133
msgid "Calculate Factors"
msgstr ""

#: appTools/ToolCalibration.py:1155
msgid "STEP 4: Adjusted GCode"
msgstr ""

#: appTools/ToolCalibration.py:1157
msgid ""
"Generate verification GCode file adjusted with\n"
"the factors above."
msgstr ""

#: appTools/ToolCalibration.py:1162
msgid "Scale Factor X:"
msgstr ""

#: appTools/ToolCalibration.py:1164
msgid "Factor for Scale action over X axis."
msgstr ""

#: appTools/ToolCalibration.py:1174
msgid "Scale Factor Y:"
msgstr ""

#: appTools/ToolCalibration.py:1176
msgid "Factor for Scale action over Y axis."
msgstr ""

#: appTools/ToolCalibration.py:1186
msgid "Apply Scale Factors"
msgstr ""

#: appTools/ToolCalibration.py:1188
msgid "Apply Scale factors on the calibration points."
msgstr ""

#: appTools/ToolCalibration.py:1198
msgid "Skew Angle X:"
msgstr ""

#: appTools/ToolCalibration.py:1211
msgid "Skew Angle Y:"
msgstr ""

#: appTools/ToolCalibration.py:1224
msgid "Apply Skew Factors"
msgstr ""

#: appTools/ToolCalibration.py:1226
msgid "Apply Skew factors on the calibration points."
msgstr ""

#: appTools/ToolCalibration.py:1295
msgid "Generate Adjusted GCode"
msgstr ""

#: appTools/ToolCalibration.py:1297
msgid ""
"Generate verification GCode file adjusted with\n"
"the factors set above.\n"
"The GCode parameters can be readjusted\n"
"before clicking this button."
msgstr ""

#: appTools/ToolCalibration.py:1318
msgid "STEP 5: Calibrate FlatCAM Objects"
msgstr ""

#: appTools/ToolCalibration.py:1320
msgid ""
"Adjust the FlatCAM objects\n"
"with the factors determined and verified above."
msgstr ""

#: appTools/ToolCalibration.py:1332
msgid "Adjusted object type"
msgstr ""

#: appTools/ToolCalibration.py:1333
msgid "Type of the FlatCAM Object to be adjusted."
msgstr ""

#: appTools/ToolCalibration.py:1346
msgid "Adjusted object selection"
msgstr ""

#: appTools/ToolCalibration.py:1348
msgid "The FlatCAM Object to be adjusted."
msgstr ""

#: appTools/ToolCalibration.py:1355
msgid "Calibrate"
msgstr ""

#: appTools/ToolCalibration.py:1357
msgid ""
"Adjust (scale and/or skew) the objects\n"
"with the factors determined above."
msgstr ""

#: appTools/ToolCopperThieving.py:184 appTools/ToolCopperThieving.py:209
msgid "Lines Grid works only for 'itself' reference ..."
msgstr ""

#: appTools/ToolCopperThieving.py:195
msgid "Solid fill selected."
msgstr ""

#: appTools/ToolCopperThieving.py:200
msgid "Dots grid fill selected."
msgstr ""

#: appTools/ToolCopperThieving.py:205
msgid "Squares grid fill selected."
msgstr ""

#: appTools/ToolCopperThieving.py:226 appTools/ToolCopperThieving.py:308
#: appTools/ToolCopperThieving.py:910 appTools/ToolCorners.py:120
#: appTools/ToolDblSided.py:304 appTools/ToolExtractDrills.py:141
#: appTools/ToolFiducials.py:187 appTools/ToolFiducials.py:464 appTools/ToolOptimal.py:138
#: appTools/ToolPunchGerber.py:188 appTools/ToolQRCode.py:158
msgid "There is no Gerber object loaded ..."
msgstr ""

#: appTools/ToolCopperThieving.py:239 appTools/ToolCopperThieving.py:838
msgid "Append geometry"
msgstr ""

#: appTools/ToolCopperThieving.py:283 appTools/ToolCopperThieving.py:871
#: appTools/ToolCopperThieving.py:1016
msgid "Append source file"
msgstr ""

#: appTools/ToolCopperThieving.py:291 appTools/ToolCopperThieving.py:879
msgid "Copper Thieving Tool done."
msgstr ""

#: appTools/ToolCopperThieving.py:318 appTools/ToolCopperThieving.py:351
#: appTools/ToolCutOut.py:539 appTools/ToolCutOut.py:862 appTools/ToolDrilling.py:725
#: appTools/ToolDrilling.py:1568 appTools/ToolEtchCompensation.py:152
#: appTools/ToolInvertGerber.py:99 appTools/ToolIsolation.py:899
#: appTools/ToolIsolation.py:1310 appTools/ToolIsolation.py:1337 appTools/ToolMilling.py:424
#: appTools/ToolMilling.py:639 appTools/ToolMilling.py:1322 appTools/ToolNCC.py:829
#: appTools/ToolNCC.py:1261 appTools/ToolNCC.py:1307 appTools/ToolNCC.py:1340
#: appTools/ToolPaint.py:1085 appTools/ToolPanelize.py:191 appTools/ToolPanelize.py:205
#: appTools/ToolSub.py:157 appTools/ToolSub.py:170 appTools/ToolSub.py:359
#: appTools/ToolSub.py:372 tclCommands/TclCommandCopperClear.py:97
#: tclCommands/TclCommandPaint.py:99
msgid "Could not retrieve object"
msgstr ""

#: appTools/ToolCopperThieving.py:379
msgid "Click the end point of the filling area."
msgstr ""

#: appTools/ToolCopperThieving.py:507 appTools/ToolCopperThieving.py:511
#: appTools/ToolCopperThieving.py:572
msgid "Thieving"
msgstr ""

#: appTools/ToolCopperThieving.py:518
msgid "Copper Thieving Tool started. Reading parameters."
msgstr ""

#: appTools/ToolCopperThieving.py:543
msgid "Copper Thieving Tool. Preparing isolation polygons."
msgstr ""

#: appTools/ToolCopperThieving.py:588
msgid "Copper Thieving Tool. Preparing areas to fill with copper."
msgstr ""

#: appTools/ToolCopperThieving.py:599 appTools/ToolIsolation.py:906 appTools/ToolNCC.py:836
#: appTools/ToolOptimal.py:145 appTools/ToolPanelize.py:612 appTools/ToolRulesCheck.py:626
msgid "Working..."
msgstr ""

#: appTools/ToolCopperThieving.py:626
msgid "Geometry not supported for bounding box"
msgstr ""

#: appTools/ToolCopperThieving.py:632 appTools/ToolNCC.py:1631 appTools/ToolNCC.py:1686
#: appTools/ToolNCC.py:2626 appTools/ToolPaint.py:2456
msgid "No object available."
msgstr ""

#: appTools/ToolCopperThieving.py:669 appTools/ToolNCC.py:1656 appTools/ToolNCC.py:1709
#: appTools/ToolNCC.py:2668
msgid "The reference object type is not supported."
msgstr ""

#: appTools/ToolCopperThieving.py:674
msgid "Copper Thieving Tool. Appending new geometry and buffering."
msgstr ""

#: appTools/ToolCopperThieving.py:690
msgid "Create geometry"
msgstr ""

#: appTools/ToolCopperThieving.py:890 appTools/ToolCopperThieving.py:894
msgid "P-Plating Mask"
msgstr ""

#: appTools/ToolCopperThieving.py:916
msgid "Append PP-M geometry"
msgstr ""

#: appTools/ToolCopperThieving.py:1034
msgid "Generating Pattern Plating Mask done."
msgstr ""

#: appTools/ToolCopperThieving.py:1106
msgid "Copper Thieving Tool exit."
msgstr ""

#: appTools/ToolCopperThieving.py:1165 appTools/ToolFiducials.py:875
msgid "Gerber Object to which will be added a copper thieving."
msgstr ""

#: appTools/ToolCopperThieving.py:1191
msgid ""
"This set the distance between the copper thieving components\n"
"(the polygon fill may be split in multiple polygons)\n"
"and the copper traces in the Gerber file."
msgstr ""

#: appTools/ToolCopperThieving.py:1224
msgid ""
"- 'Itself' - the copper thieving extent is based on the object extent.\n"
"- 'Area Selection' - left mouse click to start selection of the area to be filled.\n"
"- 'Reference Object' - will do copper thieving within the area specified by another "
"object."
msgstr ""

#: appTools/ToolCopperThieving.py:1231 appTools/ToolIsolation.py:3330
#: appTools/ToolNCC.py:4203 appTools/ToolPaint.py:3135
msgid "Ref. Type"
msgstr ""

#: appTools/ToolCopperThieving.py:1233
msgid ""
"The type of FlatCAM object to be used as copper thieving reference.\n"
"It can be Gerber, Excellon or Geometry."
msgstr ""

#: appTools/ToolCopperThieving.py:1242 appTools/ToolIsolation.py:3341
#: appTools/ToolNCC.py:4213 appTools/ToolPaint.py:3145
msgid "Ref. Object"
msgstr ""

#: appTools/ToolCopperThieving.py:1244 appTools/ToolIsolation.py:3343
#: appTools/ToolNCC.py:4215 appTools/ToolPaint.py:3147
msgid "The FlatCAM object to be used as non copper clearing reference."
msgstr ""

#: appTools/ToolCopperThieving.py:1420
msgid "Insert Copper thieving"
msgstr ""

#: appTools/ToolCopperThieving.py:1422
msgid ""
"Will add a polygon (may be split in multiple parts)\n"
"that will surround the actual Gerber traces at a certain distance."
msgstr ""

#: appTools/ToolCopperThieving.py:1481
msgid "Insert Robber Bar"
msgstr ""

#: appTools/ToolCopperThieving.py:1483
msgid ""
"Will add a polygon with a defined thickness\n"
"that will surround the actual Gerber object\n"
"at a certain distance.\n"
"Required when doing holes pattern plating."
msgstr ""

#: appTools/ToolCopperThieving.py:1507
msgid "Select Soldermask object"
msgstr ""

#: appTools/ToolCopperThieving.py:1509
msgid ""
"Gerber Object with the soldermask.\n"
"It will be used as a base for\n"
"the pattern plating mask."
msgstr ""

#: appTools/ToolCopperThieving.py:1538
msgid "Plated area"
msgstr ""

#: appTools/ToolCopperThieving.py:1540
msgid ""
"The area to be plated by pattern plating.\n"
"Basically is made from the openings in the plating mask.\n"
"\n"
"<<WARNING>> - the calculated area is actually a bit larger\n"
"due of the fact that the soldermask openings are by design\n"
"a bit larger than the copper pads, and this area is\n"
"calculated from the soldermask openings."
msgstr ""

#: appTools/ToolCopperThieving.py:1551
msgid "mm"
msgstr ""

#: appTools/ToolCopperThieving.py:1553
msgid "in"
msgstr ""

#: appTools/ToolCopperThieving.py:1560
msgid "Generate pattern plating mask"
msgstr ""

#: appTools/ToolCopperThieving.py:1562
msgid ""
"Will add to the soldermask gerber geometry\n"
"the geometries of the copper thieving and/or\n"
"the robber bar if those were generated."
msgstr ""

#: appTools/ToolCorners.py:87
msgid "Corners Tool"
msgstr ""

#: appTools/ToolCorners.py:157
msgid "Please select at least a location"
msgstr ""

#: appTools/ToolCorners.py:292
msgid "Corners Tool exit."
msgstr ""

#: appTools/ToolCorners.py:319
msgid "The Gerber object to which will be added corner markers."
msgstr ""

#: appTools/ToolCorners.py:335
msgid "Locations"
msgstr ""

#: appTools/ToolCorners.py:337
msgid "Locations where to place corner markers."
msgstr ""

#: appTools/ToolCorners.py:354 appTools/ToolFiducials.py:706
msgid "Top Right"
msgstr ""

#: appTools/ToolCorners.py:363
msgid "Toggle ALL"
msgstr ""

#: appTools/ToolCorners.py:429
msgid "Add Marker"
msgstr ""

#: appTools/ToolCorners.py:431
msgid "Will add corner markers to the selected Gerber file."
msgstr ""

#: appTools/ToolCutOut.py:274 appTools/ToolIsolation.py:785 appTools/ToolIsolation.py:1014
#: appTools/ToolIsolation.py:1150 appTools/ToolNCC.py:458 appTools/ToolNCC.py:945
#: appTools/ToolNCC.py:1083 appTools/ToolPaint.py:395 appTools/ToolPaint.py:685
#: appTools/ToolPaint.py:822 appTools/ToolSolderPaste.py:131 appTools/ToolSolderPaste.py:464
#: app_Main.py:4490
msgid "Please enter a tool diameter with non-zero value, in Float format."
msgstr ""

#: appTools/ToolCutOut.py:350 appTools/ToolIsolation.py:1095 appTools/ToolNCC.py:1028
#: appTools/ToolPaint.py:766
msgid "Tool not in Tools Database. Adding a default tool."
msgstr ""

#: appTools/ToolCutOut.py:357 appTools/ToolDrilling.py:941 appTools/ToolIsolation.py:1102
#: appTools/ToolNCC.py:1035 appTools/ToolPaint.py:774
msgid ""
"Cancelled.\n"
"Multiple tools for one tool diameter found in Tools Database."
msgstr ""

#: appTools/ToolCutOut.py:381
msgid "Updated tool from Tools Database."
msgstr ""

#: appTools/ToolCutOut.py:449
msgid "Default tool added."
msgstr ""

#: appTools/ToolCutOut.py:458 appTools/ToolIsolation.py:2539 appTools/ToolNCC.py:3601
#: appTools/ToolPaint.py:2619
msgid "Selected tool can't be used here. Pick another."
msgstr ""

#: appTools/ToolCutOut.py:481
msgid "Tool updated from Tools Database."
msgstr ""

#: appTools/ToolCutOut.py:544
msgid ""
"There is no object selected for Cutout.\n"
"Select one and try again."
msgstr ""

#: appTools/ToolCutOut.py:550 appTools/ToolCutOut.py:871 appTools/ToolCutOut.py:1118
#: appTools/ToolCutOut.py:1236 tclCommands/TclCommandGeoCutout.py:184
msgid "Tool Diameter is zero value. Change it to a positive real number."
msgstr ""

#: appTools/ToolCutOut.py:563 appTools/ToolCutOut.py:886
msgid "Number of gaps value is missing. Add it and retry."
msgstr ""

#: appTools/ToolCutOut.py:568 appTools/ToolCutOut.py:890
msgid ""
"Gaps value can be only one of: 'None', 'lr', 'tb', '2lr', '2tb', 4 or 8. Fill in a "
"correct value and retry. "
msgstr ""

#: appTools/ToolCutOut.py:573 appTools/ToolCutOut.py:896
msgid ""
"Cutout operation cannot be done on a multi-geo Geometry.\n"
"Optionally, this Multi-geo Geometry can be converted to Single-geo Geometry,\n"
"and after that perform Cutout."
msgstr ""

#: appTools/ToolCutOut.py:836
msgid "Mouse bites failed."
msgstr ""

#: appTools/ToolCutOut.py:840 appTools/ToolCutOut.py:1086
msgid "Any form CutOut operation finished."
msgstr ""

#: appTools/ToolCutOut.py:866 appTools/ToolDrilling.py:1572
#: appTools/ToolEtchCompensation.py:158 appTools/ToolInvertGerber.py:105
#: appTools/ToolIsolation.py:903 appTools/ToolIsolation.py:1314
#: appTools/ToolIsolation.py:1341 appTools/ToolMilling.py:1326 appTools/ToolNCC.py:833
#: appTools/ToolNCC.py:1265 appTools/ToolPaint.py:1002 appTools/ToolPanelize.py:196
#: tclCommands/TclCommandBbox.py:71 tclCommands/TclCommandNregions.py:71
msgid "Object not found"
msgstr ""

#: appTools/ToolCutOut.py:1040
msgid "Rectangular cutout with negative margin is not possible."
msgstr ""

#: appTools/ToolCutOut.py:1102 appTools/ToolCutOut.py:1129
msgid "Could not retrieve Geometry object"
msgstr ""

#: appTools/ToolCutOut.py:1107 appTools/ToolCutOut.py:1158
msgid "Geometry object for manual cutout not found"
msgstr ""

#: appTools/ToolCutOut.py:1110
msgid "Click on the selected geometry object perimeter to create a bridge gap ..."
msgstr ""

#: appTools/ToolCutOut.py:1185
msgid "No tool in the Geometry object."
msgstr ""

#: appTools/ToolCutOut.py:1206
msgid "Added manual Bridge Gap. Left click to add another or right click to finish."
msgstr ""

#: appTools/ToolCutOut.py:1218
msgid "Could not retrieve Gerber object"
msgstr ""

#: appTools/ToolCutOut.py:1223
msgid ""
"There is no Gerber object selected for Cutout.\n"
"Select one and try again."
msgstr ""

#: appTools/ToolCutOut.py:1229
msgid ""
"The selected object has to be of Gerber type.\n"
"Select a Gerber file and try again."
msgstr ""

#: appTools/ToolCutOut.py:1264
msgid "Geometry not supported for cutout"
msgstr ""

#: appTools/ToolCutOut.py:1336
msgid "Making manual bridge gap..."
msgstr ""

#: appTools/ToolCutOut.py:1378
msgid "Finished manual adding of gaps."
msgstr ""

#: appTools/ToolCutOut.py:1720
msgid "Cutout PCB"
msgstr ""

#: appTools/ToolCutOut.py:1746 appTools/ToolDblSided.py:513 appTools/ToolPanelize.py:652
msgid "Source Object"
msgstr ""

#: appTools/ToolCutOut.py:1747
msgid "Object to be cutout"
msgstr ""

#: appTools/ToolCutOut.py:1752
msgid "Kind"
msgstr ""

#: appTools/ToolCutOut.py:1774 appTools/ToolDblSided.py:521
msgid ""
"Specify the type of object to be cutout.\n"
"It can be of type: Gerber or Geometry.\n"
"What is selected here will dictate the kind\n"
"of objects that will populate the 'Object' combobox."
msgstr ""

#: appTools/ToolCutOut.py:1830 appTools/ToolIsolation.py:61 appTools/ToolIsolation.py:3078
#: appTools/ToolNCC.py:3883 appTools/ToolPaint.py:2897
msgid "Search and Add"
msgstr ""

#: appTools/ToolCutOut.py:1833 appTools/ToolIsolation.py:3081 appTools/ToolNCC.py:3886
#: appTools/ToolPaint.py:2900
msgid ""
"Add a new tool to the Tool Table\n"
"with the diameter specified above.\n"
"This is done by a background search\n"
"in the Tools Database. If nothing is found\n"
"in the Tools DB then a default tool is added."
msgstr ""

#: appTools/ToolCutOut.py:1842 appTools/ToolIsolation.py:65 appTools/ToolIsolation.py:3089
#: appTools/ToolNCC.py:3894 appTools/ToolPaint.py:2908
msgid "Pick from DB"
msgstr ""

#: appTools/ToolCutOut.py:1858
msgid "Tool Parameters"
msgstr ""

#: appTools/ToolCutOut.py:2007
msgid "Automatic"
msgstr ""

#: appTools/ToolCutOut.py:2007 appTools/ToolCutOut.py:2082
msgid "Bridge Gaps"
msgstr ""

#: appTools/ToolCutOut.py:2009
msgid "This section handle creation of automatic bridge gaps."
msgstr ""

#: appTools/ToolCutOut.py:2048
msgid ""
"Cutout the selected object.\n"
"The cutout shape can be of any shape.\n"
"Useful when the PCB has a non-rectangular shape."
msgstr ""

#: appTools/ToolCutOut.py:2063
msgid ""
"Cutout the selected object.\n"
"The resulting cutout shape is\n"
"always a rectangle shape and it will be\n"
"the bounding box of the Object."
msgstr ""

#: appTools/ToolCutOut.py:2084
msgid ""
"This section handle creation of manual bridge gaps.\n"
"This is done by mouse clicking on the perimeter of the\n"
"Geometry object that is used as a cutout object. "
msgstr ""

#: appTools/ToolCutOut.py:2100
msgid "Generate Manual Geometry"
msgstr ""

#: appTools/ToolCutOut.py:2103
msgid ""
"If the object to be cutout is a Gerber\n"
"first create a Geometry that surrounds it,\n"
"to be used as the cutout, if one doesn't exist yet.\n"
"Select the source Gerber file in the top object combobox."
msgstr ""

#: appTools/ToolCutOut.py:2123
msgid "Manual cutout Geometry"
msgstr ""

#: appTools/ToolCutOut.py:2125
msgid "Geometry object used to create the manual cutout."
msgstr ""

#: appTools/ToolCutOut.py:2132
msgid "Manual Add Bridge Gaps"
msgstr ""

#: appTools/ToolCutOut.py:2135
msgid ""
"Use the left mouse button (LMB) click\n"
"to create a bridge gap to separate the PCB from\n"
"the surrounding material.\n"
"The LMB click has to be done on the perimeter of\n"
"the Geometry object used as a cutout geometry."
msgstr ""

#: appTools/ToolDblSided.py:107
msgid "2-Sided Tool"
msgstr ""

#: appTools/ToolDblSided.py:160
msgid ""
"'Point' reference is selected and 'Point' coordinates are missing. Add them and retry."
msgstr ""

#: appTools/ToolDblSided.py:169
msgid "There is no Box reference object loaded. Load one and retry."
msgstr ""

#: appTools/ToolDblSided.py:181
msgid "No value or wrong format in Drill Dia entry. Add it and retry."
msgstr ""

#: appTools/ToolDblSided.py:193
msgid "There are no Alignment Drill Coordinates to use. Add them and retry."
msgstr ""

#: appTools/ToolDblSided.py:213
msgid "Excellon object with alignment drills created..."
msgstr ""

#: appTools/ToolDblSided.py:224 appTools/ToolPunchGerber.py:209
msgid "There is no Excellon object loaded ..."
msgstr ""

#: appTools/ToolDblSided.py:236
msgid "Click on canvas within the desired Excellon drill hole"
msgstr ""

#: appTools/ToolDblSided.py:280
msgid "Mirror reference point set."
msgstr ""

#: appTools/ToolDblSided.py:308
msgid "Only Gerber, Excellon and Geometry objects can be mirrored."
msgstr ""

#: appTools/ToolDblSided.py:320
msgid "There is no Box object loaded ..."
msgstr ""

#: appTools/ToolDblSided.py:330
msgid "There are no Point coordinates in the Point field. Add coords and try again ..."
msgstr ""

#: appTools/ToolDblSided.py:337 camlib.py:2329
msgid "Object was mirrored"
msgstr ""

#: appTools/ToolDblSided.py:403 app_Main.py:4629 app_Main.py:4784
msgid "Failed. No object(s) selected..."
msgstr ""

#: appTools/ToolDblSided.py:487
msgid "2-Sided PCB"
msgstr ""

#: appTools/ToolDblSided.py:514
msgid "Objects to be mirrored"
msgstr ""

#: appTools/ToolDblSided.py:560
msgid "Bounds Values"
msgstr ""

#: appTools/ToolDblSided.py:562
msgid ""
"Select on canvas the object(s)\n"
"for which to calculate bounds values."
msgstr ""

#: appTools/ToolDblSided.py:572
msgid "X min"
msgstr ""

#: appTools/ToolDblSided.py:574 appTools/ToolDblSided.py:588
msgid "Minimum location."
msgstr ""

#: appTools/ToolDblSided.py:586
msgid "Y min"
msgstr ""

#: appTools/ToolDblSided.py:600
msgid "X max"
msgstr ""

#: appTools/ToolDblSided.py:602 appTools/ToolDblSided.py:616
msgid "Maximum location."
msgstr ""

#: appTools/ToolDblSided.py:614
msgid "Y max"
msgstr ""

#: appTools/ToolDblSided.py:625
msgid "Center point coordinates"
msgstr ""

#: appTools/ToolDblSided.py:627
msgid "Centroid"
msgstr ""

#: appTools/ToolDblSided.py:629
msgid ""
"The center point location for the rectangular\n"
"bounding shape. Centroid. Format is (x, y)."
msgstr ""

#: appTools/ToolDblSided.py:638
msgid "Calculate Bounds Values"
msgstr ""

#: appTools/ToolDblSided.py:640
msgid ""
"Calculate the enveloping rectangular shape coordinates,\n"
"for the selection of objects.\n"
"The envelope shape is parallel with the X, Y axis."
msgstr ""

#: appTools/ToolDblSided.py:667
msgid "Mirror Operation"
msgstr ""

#: appTools/ToolDblSided.py:668
msgid "Parameters for the mirror operation"
msgstr ""

#: appTools/ToolDblSided.py:690
msgid ""
"The coordinates used as reference for the mirror operation.\n"
"Can be:\n"
"- Point -> a set of coordinates (x,y) around which the object is mirrored\n"
"- Box -> a set of coordinates (x, y) obtained from the center of the\n"
"bounding box of another object selected below\n"
"- Hole Snap -> a point defined by the center of a drill hone in a Excellon object"
msgstr ""

#: appTools/ToolDblSided.py:710
msgid "Point coordinates"
msgstr ""

#: appTools/ToolDblSided.py:715
msgid ""
"Add the coordinates in format <b>(x, y)</b> through which the mirroring axis\n"
" selected in 'MIRROR AXIS' pass.\n"
"The (x, y) coordinates are captured by pressing SHIFT key\n"
"and left mouse button click on canvas or you can enter the coordinates manually."
msgstr ""

#: appTools/ToolDblSided.py:733
msgid "Object that holds holes that can be picked as reference for mirroing."
msgstr ""

#: appTools/ToolDblSided.py:748
msgid "Pick hole"
msgstr ""

#: appTools/ToolDblSided.py:750
msgid ""
"Click inside a drill hole that belong to the selected Excellon object,\n"
"and the hole center coordinates will be copied to the Point field."
msgstr ""

#: appTools/ToolDblSided.py:766
msgid ""
"It can be of type: Gerber or Excellon or Geometry.\n"
"The coordinates of the center of the bounding box are used\n"
"as reference for mirror operation."
msgstr ""

#: appTools/ToolDblSided.py:792
msgid "Mirror"
msgstr ""

#: appTools/ToolDblSided.py:794
msgid ""
"Mirrors (flips) the specified object around \n"
"the specified axis. Does not create a new \n"
"object, but modifies it."
msgstr ""

#: appTools/ToolDblSided.py:822
msgid "PCB Alignment"
msgstr ""

#: appTools/ToolDblSided.py:824 appTools/ToolDblSided.py:932
msgid ""
"Creates an Excellon Object containing the\n"
"specified alignment holes and their mirror\n"
"images."
msgstr ""

#: appTools/ToolDblSided.py:831
msgid "Drill Diameter"
msgstr ""

#: appTools/ToolDblSided.py:866 appTools/ToolDblSided.py:873
msgid ""
"The reference point used to create the second alignment drill\n"
"from the first alignment drill, by doing mirror.\n"
"It can be modified in the Mirror Parameters -> Reference section"
msgstr ""

#: appTools/ToolDblSided.py:886
msgid "Alignment Drill Coordinates"
msgstr ""

#: appTools/ToolDblSided.py:888
msgid ""
"Alignment holes (x1, y1), (x2, y2), ... on one side of the mirror axis. For each set of "
"(x, y) coordinates\n"
"entered here, a pair of drills will be created:\n"
"\n"
"- one drill at the coordinates from the field\n"
"- one drill in mirror position over the axis selected above in the 'Align Axis'."
msgstr ""

#: appTools/ToolDblSided.py:896
msgid "Drill coordinates"
msgstr ""

#: appTools/ToolDblSided.py:903
msgid ""
"Add alignment drill holes coordinates in the format: (x1, y1), (x2, y2), ... \n"
"on one side of the alignment axis.\n"
"\n"
"The coordinates set can be obtained:\n"
"- press SHIFT key and left mouse clicking on canvas. Then click Add.\n"
"- press SHIFT key and left mouse clicking on canvas. Then Ctrl+V in the field.\n"
"- press SHIFT key and left mouse clicking on canvas. Then RMB click in the field and "
"click Paste.\n"
"- by entering the coords manually in the format: (x1, y1), (x2, y2), ..."
msgstr ""

#: appTools/ToolDblSided.py:918
msgid "Delete Last"
msgstr ""

#: appTools/ToolDblSided.py:920
msgid "Delete the last coordinates tuple in the list."
msgstr ""

#: appTools/ToolDblSided.py:930
msgid "Create Excellon Object"
msgstr ""

#: appTools/ToolDistance.py:177
msgid "Working"
msgstr ""

#: appTools/ToolDistance.py:182
msgid "MEASURING: Click on the Start point ..."
msgstr ""

#: appTools/ToolDistance.py:242 appTools/ToolDistance.py:648 appTools/ToolDistanceMin.py:302
msgid "Measure"
msgstr ""

#: appTools/ToolDistance.py:292
msgid "Distance Tool finished."
msgstr ""

#: appTools/ToolDistance.py:364
msgid "Pads overlapped. Aborting."
msgstr ""

#: appTools/ToolDistance.py:392
msgid "Distance Tool cancelled."
msgstr ""

#: appTools/ToolDistance.py:397
msgid "MEASURING: Click on the Destination point ..."
msgstr ""

#: appTools/ToolDistance.py:406 appTools/ToolDistanceMin.py:197
msgid "MEASURING"
msgstr ""

#: appTools/ToolDistance.py:407 appTools/ToolDistanceMin.py:198
msgid "Result"
msgstr ""

#: appTools/ToolDistance.py:563 appTools/ToolDistanceMin.py:238
msgid "Those are the units in which the distance is measured."
msgstr ""

#: appTools/ToolDistance.py:564 appTools/ToolDistanceMin.py:239
msgid "METRIC (mm)"
msgstr ""

#: appTools/ToolDistance.py:564 appTools/ToolDistanceMin.py:239
msgid "INCH (in)"
msgstr ""

#: appTools/ToolDistance.py:570
msgid "Snap to center"
msgstr ""

#: appTools/ToolDistance.py:572
msgid ""
"Mouse cursor will snap to the center of the pad/drill\n"
"when it is hovering over the geometry of the pad/drill."
msgstr ""

#: appTools/ToolDistance.py:582
msgid "Start Coords"
msgstr ""

#: appTools/ToolDistance.py:583 appTools/ToolDistance.py:588
msgid "This is measuring Start point coordinates."
msgstr ""

#: appTools/ToolDistance.py:593
msgid "Stop Coords"
msgstr ""

#: appTools/ToolDistance.py:594 appTools/ToolDistance.py:599
msgid "This is the measuring Stop point coordinates."
msgstr ""

#: appTools/ToolDistance.py:604 appTools/ToolDistanceMin.py:250
msgid "Dx"
msgstr ""

#: appTools/ToolDistance.py:605 appTools/ToolDistance.py:610 appTools/ToolDistanceMin.py:251
#: appTools/ToolDistanceMin.py:280
msgid "This is the distance measured over the X axis."
msgstr ""

#: appTools/ToolDistance.py:615 appTools/ToolDistanceMin.py:253
msgid "Dy"
msgstr ""

#: appTools/ToolDistance.py:616 appTools/ToolDistance.py:621 appTools/ToolDistanceMin.py:254
#: appTools/ToolDistanceMin.py:285
msgid "This is the distance measured over the Y axis."
msgstr ""

#: appTools/ToolDistance.py:627 appTools/ToolDistance.py:632 appTools/ToolDistanceMin.py:257
#: appTools/ToolDistanceMin.py:290
msgid "This is orientation angle of the measuring line."
msgstr ""

#: appTools/ToolDistance.py:637 appTools/ToolDistanceMin.py:259
msgid "DISTANCE"
msgstr ""

#: appTools/ToolDistance.py:638 appTools/ToolDistance.py:643
msgid "This is the point to point Euclidian distance."
msgstr ""

#: appTools/ToolDistanceMin.py:56 appTools/ToolDistanceMin.py:221
msgid "Minimum Distance Tool"
msgstr ""

#: appTools/ToolDistanceMin.py:67
msgid "Select two objects and no more, to measure the distance between them ..."
msgstr ""

#: appTools/ToolDistanceMin.py:108 appTools/ToolDistanceMin.py:129
#: appTools/ToolDistanceMin.py:138 appTools/ToolDistanceMin.py:159
msgid "Select two objects and no more. Currently the selection has objects: "
msgstr ""

#: appTools/ToolDistanceMin.py:206
msgid "Objects intersects or touch at"
msgstr ""

#: appTools/ToolDistanceMin.py:212
msgid "Jumped to the half point between the two selected objects"
msgstr ""

#: appTools/ToolDistanceMin.py:242
msgid "First object point"
msgstr ""

#: appTools/ToolDistanceMin.py:243 appTools/ToolDistanceMin.py:268
msgid ""
"This is first object point coordinates.\n"
"This is the start point for measuring distance."
msgstr ""

#: appTools/ToolDistanceMin.py:246
msgid "Second object point"
msgstr ""

#: appTools/ToolDistanceMin.py:247 appTools/ToolDistanceMin.py:274
msgid ""
"This is second object point coordinates.\n"
"This is the end point for measuring distance."
msgstr ""

#: appTools/ToolDistanceMin.py:260 appTools/ToolDistanceMin.py:295
msgid "This is the point to point Euclidean distance."
msgstr ""

#: appTools/ToolDistanceMin.py:262
msgid "Half Point"
msgstr ""

#: appTools/ToolDistanceMin.py:263 appTools/ToolDistanceMin.py:300
msgid "This is the middle point of the point to point Euclidean distance."
msgstr ""

#: appTools/ToolDistanceMin.py:305
msgid "Jump to Half Point"
msgstr ""

#: appTools/ToolDrilling.py:1181 appTools/ToolIsolation.py:772 appTools/ToolMilling.py:962
#: appTools/ToolNCC.py:444 appTools/ToolPaint.py:381
msgid "Current Tool parameters were applied to all tools."
msgstr ""

#: appTools/ToolDrilling.py:1586 camlib.py:3619
msgid "The loaded Excellon file has no drills"
msgstr ""

#: appTools/ToolDrilling.py:1631 camlib.py:3541
msgid "Creating a list of points to drill..."
msgstr ""

#: appTools/ToolDrilling.py:1638 camlib.py:3570
msgid "Failed. Drill points inside the exclusion zones."
msgstr ""

#: appTools/ToolDrilling.py:1654 camlib.py:3609 camlib.py:5002 camlib.py:5767
msgid "Starting G-Code"
msgstr ""

#: appTools/ToolDrilling.py:1659 appTools/ToolMilling.py:1355
msgid "Generating Excellon CNCJob..."
msgstr ""

#: appTools/ToolDrilling.py:1777 camlib.py:3140 camlib.py:5270 camlib.py:5629
msgid "The Toolchange X,Y format has to be (x, y)."
msgstr ""

#: appTools/ToolDrilling.py:2020 appTools/ToolMilling.py:1639
msgid "Excellon object for drilling/milling operation."
msgstr ""

#: appTools/ToolDrilling.py:2084
msgid "Search DB"
msgstr ""

#: appTools/ToolDrilling.py:2087
msgid ""
"Will search and try to replace the tools from Tools Table\n"
"with tools from DB that have a close diameter value."
msgstr ""

#: appTools/ToolDrilling.py:2486 appTools/ToolMilling.py:2168
msgid ""
"The preprocessor JSON file that dictates\n"
"Gcode output for Excellon Objects."
msgstr ""

#: appTools/ToolDrilling.py:2618 appTools/ToolMilling.py:2307
msgid ""
"Generate the CNC Job.\n"
"If milling then an additional Geometry object will be created.\n"
"Add / Select at least one tool in the tool-table.\n"
"Click the # header to select all, or Ctrl + LMB\n"
"for custom selection of tools."
msgstr ""

#: appTools/ToolEtchCompensation.py:293 appTools/ToolInvertGerber.py:217
msgid "Gerber object that will be inverted."
msgstr ""

#: appTools/ToolEtchCompensation.py:304
msgid "Utilities"
msgstr ""

#: appTools/ToolEtchCompensation.py:305
msgid "Conversion utilities"
msgstr ""

#: appTools/ToolEtchCompensation.py:310
msgid "Oz to Microns"
msgstr ""

#: appTools/ToolEtchCompensation.py:312
msgid ""
"Will convert from oz thickness to microns [um].\n"
"Can use formulas with operators: /, *, +, -, %, .\n"
"The real numbers use the dot decimals separator."
msgstr ""

#: appTools/ToolEtchCompensation.py:321
msgid "Oz value"
msgstr ""

#: appTools/ToolEtchCompensation.py:323 appTools/ToolEtchCompensation.py:344
msgid "Microns value"
msgstr ""

#: appTools/ToolEtchCompensation.py:331
msgid "Mils to Microns"
msgstr ""

#: appTools/ToolEtchCompensation.py:333
msgid ""
"Will convert from mils to microns [um].\n"
"Can use formulas with operators: /, *, +, -, %, .\n"
"The real numbers use the dot decimals separator."
msgstr ""

#: appTools/ToolEtchCompensation.py:342
msgid "Mils value"
msgstr ""

#: appTools/ToolEtchCompensation.py:357 appTools/ToolInvertGerber.py:229
msgid "Parameters for this tool"
msgstr ""

#: appTools/ToolEtchCompensation.py:362
msgid "Copper Thickness"
msgstr ""

#: appTools/ToolEtchCompensation.py:364
msgid ""
"The thickness of the copper foil.\n"
"In microns [um]."
msgstr ""

#: appTools/ToolEtchCompensation.py:375
msgid "Ratio"
msgstr ""

#: appTools/ToolEtchCompensation.py:377
msgid ""
"The ratio of lateral etch versus depth etch.\n"
"Can be:\n"
"- custom -> the user will enter a custom value\n"
"- preselection -> value which depends on a selection of etchants"
msgstr ""

#: appTools/ToolEtchCompensation.py:383
msgid "Etch Factor"
msgstr ""

#: appTools/ToolEtchCompensation.py:384
msgid "Etchants list"
msgstr ""

#: appTools/ToolEtchCompensation.py:385
msgid "Manual offset"
msgstr ""

#: appTools/ToolEtchCompensation.py:392 appTools/ToolEtchCompensation.py:397
msgid "Etchants"
msgstr ""

#: appTools/ToolEtchCompensation.py:394
msgid "A list of etchants."
msgstr ""

#: appTools/ToolEtchCompensation.py:398
msgid "Alkaline baths"
msgstr ""

#: appTools/ToolEtchCompensation.py:404
msgid "Etch factor"
msgstr ""

#: appTools/ToolEtchCompensation.py:406
msgid ""
"The ratio between depth etch and lateral etch .\n"
"Accepts real numbers and formulas using the operators: /,*,+,-,%"
msgstr ""

#: appTools/ToolEtchCompensation.py:410
msgid "Real number or formula"
msgstr ""

#: appTools/ToolEtchCompensation.py:411
msgid "Etch_factor"
msgstr ""

#: appTools/ToolEtchCompensation.py:419
msgid ""
"Value with which to increase or decrease (buffer)\n"
"the copper features. In microns [um]."
msgstr ""

#: appTools/ToolEtchCompensation.py:443
msgid "Compensate"
msgstr ""

#: appTools/ToolEtchCompensation.py:445
msgid "Will increase the copper features thickness to compensate the lateral etch."
msgstr ""

#: appTools/ToolExtractDrills.py:189 appTools/ToolExtractDrills.py:279
#: appTools/ToolExtractDrills.py:369
msgid "No drills extracted. Try different parameters."
msgstr ""

#: appTools/ToolExtractDrills.py:420 appTools/ToolExtractDrills.py:687
msgid "Extract Drills"
msgstr ""

#: appTools/ToolExtractDrills.py:454
msgid "Gerber from which to extract drill holes"
msgstr ""

#: appTools/ToolExtractDrills.py:689
msgid "Extract drills from a given Gerber file."
msgstr ""

#: appTools/ToolFiducials.py:237
msgid "Click to add first Fiducial. Bottom Left..."
msgstr ""

#: appTools/ToolFiducials.py:501
msgid "Click to add the last fiducial. Top Right..."
msgstr ""

#: appTools/ToolFiducials.py:506
msgid "Click to add the second fiducial. Top Left or Bottom Right..."
msgstr ""

#: appTools/ToolFiducials.py:509 appTools/ToolFiducials.py:518
msgid "Done. All fiducials have been added."
msgstr ""

#: appTools/ToolFiducials.py:595
msgid "Fiducials Tool exit."
msgstr ""

#: appTools/ToolFiducials.py:667
msgid "Fiducials Coordinates"
msgstr ""

#: appTools/ToolFiducials.py:669
msgid ""
"A table with the fiducial points coordinates,\n"
"in the format (x, y)."
msgstr ""

#: appTools/ToolFiducials.py:805
msgid ""
"- 'Auto' - automatic placement of fiducials in the corners of the bounding box.\n"
" - 'Manual' - manual placement of fiducials."
msgstr ""

#: appTools/ToolFiducials.py:851
msgid "Thickness of the line that makes the fiducial."
msgstr ""

#: appTools/ToolFiducials.py:882
msgid "Add Fiducial"
msgstr ""

#: appTools/ToolFiducials.py:884
msgid "Will add a polygon on the copper layer to serve as fiducial."
msgstr ""

#: appTools/ToolFiducials.py:900
msgid "Soldermask Gerber"
msgstr ""

#: appTools/ToolFiducials.py:902
msgid "The Soldermask Gerber object."
msgstr ""

#: appTools/ToolFiducials.py:914
msgid "Add Soldermask Opening"
msgstr ""

#: appTools/ToolFiducials.py:916
msgid ""
"Will add a polygon on the soldermask layer\n"
"to serve as fiducial opening.\n"
"The diameter is always double of the diameter\n"
"for the copper fiducial."
msgstr ""

#: appTools/ToolFilm.py:154
msgid "No FlatCAM object selected. Load an object for Film and retry."
msgstr ""

#: appTools/ToolFilm.py:161
msgid "No FlatCAM object selected. Load an object for Box and retry."
msgstr ""

#: appTools/ToolFilm.py:165
msgid "No FlatCAM object selected."
msgstr ""

#: appTools/ToolFilm.py:176
msgid "Generating Film ..."
msgstr ""

#: appTools/ToolFilm.py:225 appTools/ToolFilm.py:229
msgid "Export positive film"
msgstr ""

#: appTools/ToolFilm.py:262
msgid "No Excellon object selected. Load an object for punching reference and retry."
msgstr ""

#: appTools/ToolFilm.py:286
msgid ""
" Could not generate punched hole film because the punch hole sizeis bigger than some of "
"the apertures in the Gerber object."
msgstr ""

#: appTools/ToolFilm.py:298
msgid ""
"Could not generate punched hole film because the punch hole sizeis bigger than some of "
"the apertures in the Gerber object."
msgstr ""

#: appTools/ToolFilm.py:316
msgid ""
"Could not generate punched hole film because the newly created object geometry is the "
"same as the one in the source object geometry..."
msgstr ""

#: appTools/ToolFilm.py:371 appTools/ToolFilm.py:375
msgid "Export negative film"
msgstr ""

#: appTools/ToolFilm.py:434 appTools/ToolFilm.py:615 appTools/ToolPanelize.py:209
msgid "No object Box. Using instead"
msgstr ""

#: appTools/ToolFilm.py:550 appTools/ToolFilm.py:728
msgid "Film file exported to"
msgstr ""

#: appTools/ToolFilm.py:553 appTools/ToolFilm.py:731
msgid "Generating Film ... Please wait."
msgstr ""

#: appTools/ToolFilm.py:754
msgid "Film PCB"
msgstr ""

#: appTools/ToolFilm.py:786
msgid ""
"Specify the type of object for which to create the film.\n"
"The object can be of type: Gerber or Geometry.\n"
"The selection here decide the type of objects that will be\n"
"in the Film Object combobox."
msgstr ""

#: appTools/ToolFilm.py:809
msgid ""
"Specify the type of object to be used as an container for\n"
"film creation. It can be: Gerber or Geometry type.The selection here decide the type of "
"objects that will be\n"
"in the Box Object combobox."
msgstr ""

#: appTools/ToolFilm.py:976
msgid "Film Parameters"
msgstr ""

#: appTools/ToolFilm.py:1035
msgid "Punch drill holes"
msgstr ""

#: appTools/ToolFilm.py:1036
msgid ""
"When checked the generated film will have holes in pads when\n"
"the generated film is positive. This is done to help drilling,\n"
"when done manually."
msgstr ""

#: appTools/ToolFilm.py:1054
msgid "Source"
msgstr ""

#: appTools/ToolFilm.py:1056
msgid ""
"The punch hole source can be:\n"
"- Excellon -> an Excellon holes center will serve as reference.\n"
"- Pad Center -> will try to use the pads center as reference."
msgstr ""

#: appTools/ToolFilm.py:1061
msgid "Pad center"
msgstr ""

#: appTools/ToolFilm.py:1066
msgid "Excellon Obj"
msgstr ""

#: appTools/ToolFilm.py:1068
msgid "Remove the geometry of Excellon from the Film to create the holes in pads."
msgstr ""

#: appTools/ToolFilm.py:1082
msgid "Punch Size"
msgstr ""

#: appTools/ToolFilm.py:1083
msgid "The value here will control how big is the punch hole in the pads."
msgstr ""

#: appTools/ToolFilm.py:1203
msgid "Save Film"
msgstr ""

#: appTools/ToolFilm.py:1206
msgid ""
"Create a Film for the selected object, within\n"
"the specified box. Does not create a new \n"
" FlatCAM object, but directly save it in the\n"
"selected format."
msgstr ""

#: appTools/ToolFilm.py:1277
msgid ""
"Using the Pad center does not work on Geometry objects. Only a Gerber object has pads."
msgstr ""

#: appTools/ToolImage.py:65
msgid "Image Tool"
msgstr ""

#: appTools/ToolImage.py:95 appTools/ToolImage.py:98
msgid "Import IMAGE"
msgstr ""

#: appTools/ToolImage.py:142 app_Main.py:8870 app_Main.py:8923
msgid "Not supported type is picked as parameter. Only Geometry and Gerber are supported"
msgstr ""

#: appTools/ToolImage.py:150
msgid "Importing Image"
msgstr ""

#: appTools/ToolImage.py:162 appTools/ToolPDF.py:154 app_Main.py:8901 app_Main.py:8956
#: app_Main.py:9020 app_Main.py:9083 app_Main.py:9149 app_Main.py:9214 app_Main.py:9271
msgid "Opened"
msgstr ""

#: appTools/ToolImage.py:167
msgid "Image as Object"
msgstr ""

#: appTools/ToolImage.py:198
msgid ""
"Specify the type of object to create from the image.\n"
"It can be of type: Gerber or Geometry."
msgstr ""

#: appTools/ToolImage.py:207
msgid "DPI value"
msgstr ""

#: appTools/ToolImage.py:208
msgid "Specify a DPI value for the image."
msgstr ""

#: appTools/ToolImage.py:214
msgid "Level of detail"
msgstr ""

#: appTools/ToolImage.py:223
msgid "Image type"
msgstr ""

#: appTools/ToolImage.py:225
msgid ""
"Choose a method for the image interpretation.\n"
"B/W means a black & white image. Color means a colored image."
msgstr ""

#: appTools/ToolImage.py:234 appTools/ToolImage.py:249 appTools/ToolImage.py:262
#: appTools/ToolImage.py:275
msgid "Mask value"
msgstr ""

#: appTools/ToolImage.py:236
msgid ""
"Mask for monochrome image.\n"
"Takes values between [0 ... 255].\n"
"Decides the level of details to include\n"
"in the resulting geometry.\n"
"0 means no detail and 255 means everything \n"
"(which is totally black)."
msgstr ""

#: appTools/ToolImage.py:251
msgid ""
"Mask for RED color.\n"
"Takes values between [0 ... 255].\n"
"Decides the level of details to include\n"
"in the resulting geometry."
msgstr ""

#: appTools/ToolImage.py:264
msgid ""
"Mask for GREEN color.\n"
"Takes values between [0 ... 255].\n"
"Decides the level of details to include\n"
"in the resulting geometry."
msgstr ""

#: appTools/ToolImage.py:277
msgid ""
"Mask for BLUE color.\n"
"Takes values between [0 ... 255].\n"
"Decides the level of details to include\n"
"in the resulting geometry."
msgstr ""

#: appTools/ToolImage.py:285
msgid "Import image"
msgstr ""

#: appTools/ToolImage.py:287
msgid "Open a image of raster type and then import it in FlatCAM."
msgstr ""

#: appTools/ToolInvertGerber.py:75
msgid "Invert Tool"
msgstr ""

#: appTools/ToolInvertGerber.py:269
msgid "Invert Gerber"
msgstr ""

#: appTools/ToolInvertGerber.py:271
msgid ""
"Will invert the Gerber object: areas that have copper\n"
"will be empty of copper and previous empty area will be\n"
"filled with copper."
msgstr ""

#: appTools/ToolIsolation.py:789 appTools/ToolNCC.py:462 appTools/ToolPaint.py:399
#: appTools/ToolSolderPaste.py:135 app_Main.py:4494
msgid "Adding Tool cancelled"
msgstr ""

#: appTools/ToolIsolation.py:934 appTools/ToolNCC.py:864 appTools/ToolOptimal.py:179
msgid ""
"The Gerber object has one Polygon as geometry.\n"
"There are no distances between geometry elements to be found."
msgstr ""

#: appTools/ToolIsolation.py:977 appTools/ToolNCC.py:907
msgid "Optimal tool diameter found"
msgstr ""

#: appTools/ToolIsolation.py:1022 appTools/ToolIsolation.py:1109
#: appTools/ToolIsolation.py:1171 appTools/ToolIsolation.py:2588 appTools/ToolNCC.py:954
#: appTools/ToolNCC.py:1042 appTools/ToolNCC.py:1104 appTools/ToolNCC.py:3650
#: appTools/ToolPaint.py:693 appTools/ToolPaint.py:781 appTools/ToolPaint.py:843
#: appTools/ToolPaint.py:2675 appTools/ToolSolderPaste.py:488
msgid "Cancelled. Tool already in Tool Table."
msgstr ""

#: appTools/ToolIsolation.py:1137 appTools/ToolNCC.py:1070 appTools/ToolPaint.py:809
msgid "New tool added to Tool Table from Tools Database."
msgstr ""

#: appTools/ToolIsolation.py:1201 appTools/ToolNCC.py:1134 appTools/ToolPaint.py:872
msgid "Default tool added to Tool Table."
msgstr ""

#: appTools/ToolIsolation.py:1227 appTools/ToolNCC.py:1160 appTools/ToolPaint.py:897
msgid "Tool from Tool Table was edited."
msgstr ""

#: appTools/ToolIsolation.py:1240 appTools/ToolNCC.py:1173 appTools/ToolPaint.py:910
#: appTools/ToolSolderPaste.py:548
msgid "Cancelled. New diameter value is already in the Tool Table."
msgstr ""

#: appTools/ToolIsolation.py:1291 appTools/ToolNCC.py:1224 appTools/ToolPaint.py:960
msgid "Delete failed. Select a tool to delete."
msgstr ""

#: appTools/ToolIsolation.py:1297 appTools/ToolNCC.py:1230 appTools/ToolPaint.py:966
msgid "Tool(s) deleted from Tool Table."
msgstr ""

#: appTools/ToolIsolation.py:1345
msgid "Isolating..."
msgstr ""

#: appTools/ToolIsolation.py:1365
msgid "Following geometry was generated"
msgstr ""

#: appTools/ToolIsolation.py:1380
msgid "Failed to create Follow Geometry with tool diameter"
msgstr ""

#: appTools/ToolIsolation.py:1383
msgid "Follow Geometry was created with tool diameter"
msgstr ""

#: appTools/ToolIsolation.py:1424
msgid "Click on a polygon to isolate it."
msgstr ""

#: appTools/ToolIsolation.py:1470 appTools/ToolIsolation.py:1672
#: appTools/ToolIsolation.py:1859 appTools/ToolNCC.py:1295 appTools/ToolPaint.py:1030
#: appTools/ToolPaint.py:1743
msgid "No selected tools in Tool Table."
msgstr ""

#: appTools/ToolIsolation.py:1552 appTools/ToolIsolation.py:1575
#: appTools/ToolIsolation.py:1732 appTools/ToolIsolation.py:1925
msgid "Subtracting Geo"
msgstr ""

#: appTools/ToolIsolation.py:1556 appTools/ToolIsolation.py:1736
#: appTools/ToolIsolation.py:1929
msgid "Intersecting Geo"
msgstr ""

#: appTools/ToolIsolation.py:1608 appTools/ToolIsolation.py:1805
#: appTools/ToolIsolation.py:1994
msgid "Empty Geometry in"
msgstr ""

#: appTools/ToolIsolation.py:1814
msgid ""
"Partial failure. The geometry was processed with all tools.\n"
"But there are still not-isolated geometry elements. Try to include a tool with smaller "
"diameter."
msgstr ""

#: appTools/ToolIsolation.py:1817
msgid "The following are coordinates for the copper features that could not be isolated:"
msgstr ""

#: appTools/ToolIsolation.py:2158 appTools/ToolIsolation.py:2271 appTools/ToolPaint.py:1125
msgid "Added polygon"
msgstr ""

#: appTools/ToolIsolation.py:2159 appTools/ToolIsolation.py:2273
msgid "Click to add next polygon or right click to start isolation."
msgstr ""

#: appTools/ToolIsolation.py:2171 appTools/ToolPaint.py:1139
msgid "Removed polygon"
msgstr ""

#: appTools/ToolIsolation.py:2172
msgid "Click to add/remove next polygon or right click to start isolation."
msgstr ""

#: appTools/ToolIsolation.py:2177 appTools/ToolPaint.py:1145
msgid "No polygon detected under click position."
msgstr ""

#: appTools/ToolIsolation.py:2207 appTools/ToolPaint.py:1175
msgid "List of single polygons is empty. Aborting."
msgstr ""

#: appTools/ToolIsolation.py:2276
msgid "No polygon in selection."
msgstr ""

#: appTools/ToolIsolation.py:2304
msgid "Click the end point of the paint area."
msgstr ""

#: appTools/ToolIsolation.py:2552 appTools/ToolNCC.py:3614 appTools/ToolPaint.py:2632
#: app_Main.py:5773 app_Main.py:5783
msgid "Tool from DB added in Tool Table."
msgstr ""

#: appTools/ToolIsolation.py:2606 appTools/ToolNCC.py:3667 appTools/ToolPaint.py:2692
msgid "New tool added to Tool Table."
msgstr ""

#: appTools/ToolIsolation.py:2950
msgid "Gerber object for isolation routing."
msgstr ""

#: appTools/ToolIsolation.py:2974 appTools/ToolNCC.py:3767
msgid ""
"Tools pool from which the algorithm\n"
"will pick the ones used for copper clearing."
msgstr ""

#: appTools/ToolIsolation.py:2990
msgid ""
"This is the Tool Number.\n"
"Isolation routing will start with the tool with the biggest \n"
"diameter, continuing until there are no more tools.\n"
"Only tools that create Isolation geometry will still be present\n"
"in the resulting geometry. This is because with some tools\n"
"this function will not be able to create routing geometry."
msgstr ""

#: appTools/ToolIsolation.py:2998 appTools/ToolNCC.py:3791
msgid ""
"Tool Diameter. It's value (in current FlatCAM units)\n"
"is the cut width into the material."
msgstr ""

#: appTools/ToolIsolation.py:3002 appTools/ToolNCC.py:3795
msgid ""
"The Tool Type (TT) can be:\n"
"- Circular with 1 ... 4 teeth -> it is informative only. Being circular,\n"
"the cut width in material is exactly the tool diameter.\n"
"- Ball -> informative only and make reference to the Ball type endmill.\n"
"- V-Shape -> it will disable Z-Cut parameter in the resulting geometry UI form\n"
"and enable two additional UI form fields in the resulting geometry: V-Tip Dia and\n"
"V-Tip Angle. Adjusting those two values will adjust the Z-Cut parameter such\n"
"as the cut width into material will be equal with the value in the Tool Diameter\n"
"column of this table.\n"
"Choosing the 'V-Shape' Tool Type automatically will select the Operation Type\n"
"in the resulting geometry as Isolation."
msgstr ""

#: appTools/ToolIsolation.py:3068 appTools/ToolNCC.py:3873
msgid "Find Optimal"
msgstr ""

#: appTools/ToolIsolation.py:3071 appTools/ToolNCC.py:3876
msgid ""
"Find a tool diameter that is guaranteed\n"
"to do a complete isolation."
msgstr ""

#: appTools/ToolIsolation.py:3108 appTools/ToolNCC.py:3913 appTools/ToolPaint.py:2927
#: appTools/ToolSolderPaste.py:1211
msgid ""
"Delete a selection of tools in the Tool Table\n"
"by first selecting a row(s) in the Tool Table."
msgstr ""

#: appTools/ToolIsolation.py:3286
msgid ""
"Specify the type of object to be excepted from isolation.\n"
"It can be of type: Gerber or Geometry.\n"
"What is selected here will dictate the kind\n"
"of objects that will populate the 'Object' combobox."
msgstr ""

#: appTools/ToolIsolation.py:3296
msgid "Object whose area will be removed from isolation geometry."
msgstr ""

#: appTools/ToolIsolation.py:3332 appTools/ToolNCC.py:4205
msgid ""
"The type of FlatCAM object to be used as non copper clearing reference.\n"
"It can be Gerber, Excellon or Geometry."
msgstr ""

#: appTools/ToolIsolation.py:3398
msgid ""
"Create a Geometry object with toolpaths to cut \n"
"isolation outside, inside or on both sides of the\n"
"object. For a Gerber object outside means outside\n"
"of the Gerber feature and inside means inside of\n"
"the Gerber feature, if possible at all. This means\n"
"that only if the Gerber feature has openings inside, they\n"
"will be isolated. If what is wanted is to cut isolation\n"
"inside the actual Gerber feature, use a negative tool\n"
"diameter above."
msgstr ""

#: appTools/ToolMilling.py:1064
msgid "Generating drills milling geometry..."
msgstr ""

#: appTools/ToolMilling.py:1169
msgid "Generating slot milling geometry..."
msgstr ""

#: appTools/ToolMilling.py:1584
msgid "Milling Holes Tool"
msgstr ""

#: appTools/ToolMilling.py:2166
msgid "Preprocessor E"
msgstr ""

#: appTools/ToolMilling.py:2178
msgid "Preprocessor G"
msgstr ""

#: appTools/ToolMilling.py:2180
msgid ""
"The preprocessor JSON file that dictates\n"
"Gcode output for Geometry (Milling) Objects."
msgstr ""

#: appTools/ToolMove.py:102
msgid "MOVE: Click on the Start point ..."
msgstr ""

#: appTools/ToolMove.py:113
msgid "Cancelled. No object(s) to move."
msgstr ""

#: appTools/ToolMove.py:140
msgid "MOVE: Click on the Destination point ..."
msgstr ""

#: appTools/ToolMove.py:163
msgid "Moving..."
msgstr ""

#: appTools/ToolMove.py:166
msgid "No object(s) selected."
msgstr ""

#: appTools/ToolMove.py:221
msgid "Error when mouse left click."
msgstr ""

#: appTools/ToolNCC.py:1674 appTools/ToolNCC.py:2598
msgid "NCC Tool. Preparing non-copper polygons."
msgstr ""

#: appTools/ToolNCC.py:1734 appTools/ToolNCC.py:2726
msgid "NCC Tool. Calculate 'empty' area."
msgstr ""

#: appTools/ToolNCC.py:1745 appTools/ToolNCC.py:1774 appTools/ToolNCC.py:1880
#: appTools/ToolNCC.py:1893 appTools/ToolNCC.py:2739 appTools/ToolNCC.py:2844
#: appTools/ToolNCC.py:2859 appTools/ToolNCC.py:3125 appTools/ToolNCC.py:3226
#: appTools/ToolNCC.py:3241
msgid "Buffering finished"
msgstr ""

#: appTools/ToolNCC.py:1749 appTools/ToolNCC.py:1778 appTools/ToolNCC.py:1884
#: appTools/ToolNCC.py:1896 appTools/ToolNCC.py:2747 appTools/ToolNCC.py:2866
#: appTools/ToolNCC.py:3132 appTools/ToolNCC.py:3248
msgid "Could not get the extent of the area to be non copper cleared."
msgstr ""

#: appTools/ToolNCC.py:1757 appTools/ToolNCC.py:1907 appTools/ToolNCC.py:2877
msgid "NCC Tool. Finished calculation of 'empty' area."
msgstr ""

#: appTools/ToolNCC.py:1810 appTools/ToolNCC.py:2774 appTools/ToolNCC.py:2851
#: appTools/ToolNCC.py:3152 appTools/ToolNCC.py:3233
msgid "Isolation geometry is broken. Margin is less than isolation tool diameter."
msgstr ""

#: appTools/ToolNCC.py:1900 appTools/ToolNCC.py:2870 appTools/ToolNCC.py:3251
msgid "The selected object is not suitable for copper clearing."
msgstr ""

#: appTools/ToolNCC.py:1950
msgid "Clearing the polygon with the method: lines."
msgstr ""

#: appTools/ToolNCC.py:1960
msgid "Failed. Clearing the polygon with the method: seed."
msgstr ""

#: appTools/ToolNCC.py:1969
msgid "Failed. Clearing the polygon with the method: standard."
msgstr ""

#: appTools/ToolNCC.py:1985
msgid "Polygon could not be cleared. Location:"
msgstr ""

#: appTools/ToolNCC.py:2017 appTools/ToolNCC.py:2019 appTools/ToolNCC.py:2547
#: appTools/ToolNCC.py:2549
msgid "Non-Copper clearing ..."
msgstr ""

#: appTools/ToolNCC.py:2038
msgid "There is no copper clearing tool in the selection and at least one is needed."
msgstr ""

#: appTools/ToolNCC.py:2053 appTools/ToolNCC.py:2694
msgid "NCC Tool. Finished non-copper polygons. Normal copper clearing task started."
msgstr ""

#: appTools/ToolNCC.py:2081 appTools/ToolNCC.py:2315
msgid "NCC Tool failed creating bounding box."
msgstr ""

#: appTools/ToolNCC.py:2101 appTools/ToolNCC.py:2351 appTools/ToolNCC.py:2890
#: appTools/ToolNCC.py:3276
msgid "NCC Tool clearing with tool diameter"
msgstr ""

#: appTools/ToolNCC.py:2101 appTools/ToolNCC.py:2351 appTools/ToolNCC.py:2890
#: appTools/ToolNCC.py:3276
msgid "started."
msgstr ""

#: appTools/ToolNCC.py:2229
msgid "Could not use the tool for copper clear."
msgstr ""

#: appTools/ToolNCC.py:2251 appTools/ToolNCC.py:3051
msgid ""
"There is no NCC Geometry in the file.\n"
"Usually it means that the tool diameter is too big for the painted geometry.\n"
"Change the painting parameters and try again."
msgstr ""

#: appTools/ToolNCC.py:2261 appTools/ToolNCC.py:3060
msgid "NCC Tool clear all done."
msgstr ""

#: appTools/ToolNCC.py:2264 appTools/ToolNCC.py:3063
msgid "NCC Tool clear all done but the copper features isolation is broken for"
msgstr ""

#: appTools/ToolNCC.py:2266 appTools/ToolNCC.py:2462 appTools/ToolNCC.py:3065
#: appTools/ToolNCC.py:3448
msgid "tools"
msgstr ""

#: appTools/ToolNCC.py:2293
msgid "NCC Tool. Rest machining copper clearing task started."
msgstr ""

#: appTools/ToolNCC.py:2458 appTools/ToolNCC.py:3444
msgid "NCC Tool Rest Machining clear all done."
msgstr ""

#: appTools/ToolNCC.py:2461 appTools/ToolNCC.py:3447
msgid ""
"NCC Tool Rest Machining clear all done but the copper features isolation is broken for"
msgstr ""

#: appTools/ToolNCC.py:2559
msgid "NCC Tool started. Reading parameters."
msgstr ""

#: appTools/ToolNCC.py:3546
msgid ""
"Try to use the Buffering Type = Full in Preferences -> Gerber General. Reload the Gerber "
"file after this change."
msgstr ""

#: appTools/ToolNCC.py:3702
msgid "Non-Copper Clearing"
msgstr ""

#: appTools/ToolNCC.py:3731 appTools/ToolPaint.py:2764
msgid "Obj Type"
msgstr ""

#: appTools/ToolNCC.py:3733
msgid ""
"Specify the type of object to be cleared of excess copper.\n"
"It can be of type: Gerber or Geometry.\n"
"What is selected here will dictate the kind\n"
"of objects that will populate the 'Object' combobox."
msgstr ""

#: appTools/ToolNCC.py:3755
msgid "Object to be cleared of excess copper."
msgstr ""

#: appTools/ToolNCC.py:3783
msgid ""
"This is the Tool Number.\n"
"Non copper clearing will start with the tool with the biggest \n"
"diameter, continuing until there are no more tools.\n"
"Only tools that create NCC clearing geometry will still be present\n"
"in the resulting geometry. This is because with some tools\n"
"this function will not be able to create painting geometry."
msgstr ""

#: appTools/ToolOptimal.py:142
msgid "Only Gerber objects can be evaluated."
msgstr ""

#: appTools/ToolOptimal.py:148
msgid "Optimal Tool. Started to search for the minimum distance between copper features."
msgstr ""

#: appTools/ToolOptimal.py:158
msgid "Optimal Tool. Parsing geometry for aperture"
msgstr ""

#: appTools/ToolOptimal.py:169
msgid "Optimal Tool. Creating a buffer for the object geometry."
msgstr ""

#: appTools/ToolOptimal.py:184
msgid "Optimal Tool. Finding the distances between each two elements. Iterations"
msgstr ""

#: appTools/ToolOptimal.py:218
msgid "Optimal Tool. Finding the minimum distance."
msgstr ""

#: appTools/ToolOptimal.py:234
msgid "Optimal Tool. Finished successfully."
msgstr ""

#: appTools/ToolOptimal.py:435
msgid "Number of decimals kept for found distances."
msgstr ""

#: appTools/ToolOptimal.py:443
msgid "Minimum distance"
msgstr ""

#: appTools/ToolOptimal.py:444
msgid "Display minimum distance between copper features."
msgstr ""

#: appTools/ToolOptimal.py:448
msgid "Determined"
msgstr ""

#: appTools/ToolOptimal.py:462
msgid "Occurring"
msgstr ""

#: appTools/ToolOptimal.py:463
msgid "How many times this minimum is found."
msgstr ""

#: appTools/ToolOptimal.py:469
msgid "Minimum points coordinates"
msgstr ""

#: appTools/ToolOptimal.py:470 appTools/ToolOptimal.py:476
msgid "Coordinates for points where minimum distance was found."
msgstr ""

#: appTools/ToolOptimal.py:489 appTools/ToolOptimal.py:565
msgid "Jump to selected position"
msgstr ""

#: appTools/ToolOptimal.py:491 appTools/ToolOptimal.py:567
msgid ""
"Select a position in the Locations text box and then\n"
"click this button."
msgstr ""

#: appTools/ToolOptimal.py:499
msgid "Other distances"
msgstr ""

#: appTools/ToolOptimal.py:500
msgid ""
"Will display other distances in the Gerber file ordered from\n"
"the minimum to the maximum, not including the absolute minimum."
msgstr ""

#: appTools/ToolOptimal.py:505
msgid "Other distances points coordinates"
msgstr ""

#: appTools/ToolOptimal.py:506 appTools/ToolOptimal.py:520 appTools/ToolOptimal.py:527
#: appTools/ToolOptimal.py:544 appTools/ToolOptimal.py:551
msgid ""
"Other distances and the coordinates for points\n"
"where the distance was found."
msgstr ""

#: appTools/ToolOptimal.py:519
msgid "Gerber distances"
msgstr ""

#: appTools/ToolOptimal.py:543
msgid "Points coordinates"
msgstr ""

#: appTools/ToolOptimal.py:575
msgid "Find Minimum"
msgstr ""

#: appTools/ToolOptimal.py:577
msgid ""
"Calculate the minimum distance between copper features,\n"
"this will allow the determination of the right tool to\n"
"use for isolation or copper clearing."
msgstr ""

#: appTools/ToolPDF.py:91 appTools/ToolPDF.py:95
msgid "Open PDF"
msgstr ""

#: appTools/ToolPDF.py:98
msgid "Open PDF cancelled"
msgstr ""

#: appTools/ToolPDF.py:122
msgid "Parsing PDF file ..."
msgstr ""

#: appTools/ToolPDF.py:138 app_Main.py:9114
msgid "Failed to open"
msgstr ""

#: appTools/ToolPDF.py:203 appTools/ToolPcbWizard.py:331 app_Main.py:9063
msgid "No geometry found in file"
msgstr ""

#: appTools/ToolPDF.py:206 appTools/ToolPDF.py:279
#, python-format
msgid "Rendering PDF layer #%d ..."
msgstr ""

#: appTools/ToolPDF.py:210 appTools/ToolPDF.py:283
msgid "Open PDF file failed."
msgstr ""

#: appTools/ToolPDF.py:215 appTools/ToolPDF.py:288
msgid "Rendered"
msgstr ""

#: appTools/ToolPaint.py:998
#, python-format
msgid "Could not retrieve object: %s"
msgstr ""

#: appTools/ToolPaint.py:1008
msgid "Can't do Paint on MultiGeo geometries"
msgstr ""

#: appTools/ToolPaint.py:1045
msgid "Click on a polygon to paint it."
msgstr ""

#: appTools/ToolPaint.py:1061
msgid "Click the start point of the paint area."
msgstr ""

#: appTools/ToolPaint.py:1127
msgid "Click to add next polygon or right click to start painting."
msgstr ""

#: appTools/ToolPaint.py:1140
msgid "Click to add/remove next polygon or right click to start painting."
msgstr ""

#: appTools/ToolPaint.py:1650
msgid "Painting polygon with method: lines."
msgstr ""

#: appTools/ToolPaint.py:1662
msgid "Failed. Painting polygon with method: seed."
msgstr ""

#: appTools/ToolPaint.py:1673
msgid "Failed. Painting polygon with method: standard."
msgstr ""

#: appTools/ToolPaint.py:1689
msgid "Geometry could not be painted completely"
msgstr ""

#: appTools/ToolPaint.py:1763 appTools/ToolPaint.py:1950
msgid "Painting with tool diameter = "
msgstr ""

#: appTools/ToolPaint.py:1766 appTools/ToolPaint.py:1953
msgid "started"
msgstr ""

#: appTools/ToolPaint.py:1792 appTools/ToolPaint.py:1940
msgid "Margin parameter too big. Tool is not used"
msgstr ""

#: appTools/ToolPaint.py:1852 appTools/ToolPaint.py:2061
msgid ""
"Could not do Paint. Try a different combination of parameters. Or a different strategy of "
"paint"
msgstr ""

#: appTools/ToolPaint.py:1907 appTools/ToolPaint.py:2132
msgid ""
"There is no Painting Geometry in the file.\n"
"Usually it means that the tool diameter is too big for the painted geometry.\n"
"Change the painting parameters and try again."
msgstr ""

#: appTools/ToolPaint.py:2175
msgid "Paint failed."
msgstr ""

#: appTools/ToolPaint.py:2181
msgid "Paint Done."
msgstr ""

#: appTools/ToolPaint.py:2186
msgid "Painting..."
msgstr ""

#: appTools/ToolPaint.py:2220 appTools/ToolPaint.py:2225 appTools/ToolPaint.py:2233
#: appTools/ToolPaint.py:2320 appTools/ToolPaint.py:2323 appTools/ToolPaint.py:2331
#: appTools/ToolPaint.py:2401 appTools/ToolPaint.py:2406 appTools/ToolPaint.py:2412
msgid "Paint Tool."
msgstr ""

#: appTools/ToolPaint.py:2221 appTools/ToolPaint.py:2225 appTools/ToolPaint.py:2233
msgid "Normal painting polygon task started."
msgstr ""

#: appTools/ToolPaint.py:2222 appTools/ToolPaint.py:2320 appTools/ToolPaint.py:2403
msgid "Buffering geometry..."
msgstr ""

#: appTools/ToolPaint.py:2245 appTools/ToolPaint.py:2338 appTools/ToolPaint.py:2420
msgid "No polygon found."
msgstr ""

#: appTools/ToolPaint.py:2320 appTools/ToolPaint.py:2323 appTools/ToolPaint.py:2331
msgid "Paint all polygons task started."
msgstr ""

#: appTools/ToolPaint.py:2402 appTools/ToolPaint.py:2406 appTools/ToolPaint.py:2412
msgid "Painting area task started."
msgstr ""

#: appTools/ToolPaint.py:2766
msgid ""
"Specify the type of object to be painted.\n"
"It can be of type: Gerber or Geometry.\n"
"What is selected here will dictate the kind\n"
"of objects that will populate the 'Object' combobox."
msgstr ""

#: appTools/ToolPaint.py:2788
msgid "Object to be painted."
msgstr ""

#: appTools/ToolPaint.py:2801
msgid ""
"Tools pool from which the algorithm\n"
"will pick the ones used for painting."
msgstr ""

#: appTools/ToolPaint.py:2818
msgid ""
"This is the Tool Number.\n"
"Painting will start with the tool with the biggest diameter,\n"
"continuing until there are no more tools.\n"
"Only tools that create painting geometry will still be present\n"
"in the resulting geometry. This is because with some tools\n"
"this function will not be able to create painting geometry."
msgstr ""

#: appTools/ToolPaint.py:2830
msgid ""
"The Tool Type (TT) can be:\n"
"- Circular -> it is informative only. Being circular,\n"
"the cut width in material is exactly the tool diameter.\n"
"- Ball -> informative only and make reference to the Ball type endmill.\n"
"- V-Shape -> it will disable Z-Cut parameter in the resulting geometry UI form\n"
"and enable two additional UI form fields in the resulting geometry: V-Tip Dia and\n"
"V-Tip Angle. Adjusting those two values will adjust the Z-Cut parameter such\n"
"as the cut width into material will be equal with the value in the Tool Diameter\n"
"column of this table.\n"
"Choosing the 'V-Shape' Tool Type automatically will select the Operation Type\n"
"in the resulting geometry as Isolation."
msgstr ""

#: appTools/ToolPaint.py:3137
msgid ""
"The type of FlatCAM object to be used as paint reference.\n"
"It can be Gerber, Excellon or Geometry."
msgstr ""

#: appTools/ToolPaint.py:3179
msgid "Create a Geometry Object which paints the polygons."
msgstr ""

#: appTools/ToolPanelize.py:89
msgid "Panel. Tool"
msgstr ""

#: appTools/ToolPanelize.py:236
msgid "Columns or Rows are zero value. Change them to a positive integer."
msgstr ""

#: appTools/ToolPanelize.py:275
msgid "Generating panel ... "
msgstr ""

#: appTools/ToolPanelize.py:362 appTools/ToolPanelize.py:584
msgid "Generating panel ... Adding the source code."
msgstr ""

#: appTools/ToolPanelize.py:550
msgid "Optimizing the overlapping paths."
msgstr ""

#: appTools/ToolPanelize.py:582
msgid "Optimization complete."
msgstr ""

#: appTools/ToolPanelize.py:596
msgid "Generating panel... Spawning copies"
msgstr ""

#: appTools/ToolPanelize.py:605
msgid "Panel done..."
msgstr ""

#: appTools/ToolPanelize.py:608
#, python-brace-format
msgid "{text} Too big for the constrain area. Final panel has {col} columns and {row} rows"
msgstr ""

#: appTools/ToolPanelize.py:617
msgid "Panel created successfully."
msgstr ""

#: appTools/ToolPanelize.py:654
msgid ""
"Specify the type of object to be panelized\n"
"It can be of type: Gerber, Excellon or Geometry.\n"
"The selection here decide the type of objects that will be\n"
"in the Object combobox."
msgstr ""

#: appTools/ToolPanelize.py:687
msgid ""
"Object to be panelized. This means that it will\n"
"be duplicated in an array of rows and columns."
msgstr ""

#: appTools/ToolPanelize.py:699
msgid "Penelization Reference"
msgstr ""

#: appTools/ToolPanelize.py:701
msgid ""
"Choose the reference for panelization:\n"
"- Object = the bounding box of a different object\n"
"- Bounding Box = the bounding box of the object to be panelized\n"
"\n"
"The reference is useful when doing panelization for more than one\n"
"object. The spacings (really offsets) will be applied in reference\n"
"to this reference object therefore maintaining the panelized\n"
"objects in sync."
msgstr ""

#: appTools/ToolPanelize.py:722
msgid "Box Type"
msgstr ""

#: appTools/ToolPanelize.py:724
msgid ""
"Specify the type of object to be used as an container for\n"
"panelization. It can be: Gerber or Geometry type.\n"
"The selection here decide the type of objects that will be\n"
"in the Box Object combobox."
msgstr ""

#: appTools/ToolPanelize.py:738
msgid ""
"The actual object that is used as container for the\n"
" selected object that is to be panelized."
msgstr ""

#: appTools/ToolPanelize.py:748
msgid "Panel Data"
msgstr ""

#: appTools/ToolPanelize.py:750
msgid ""
"This informations will shape the resulting panel.\n"
"The number of rows and columns will set how many\n"
"duplicates of the original geometry will be generated.\n"
"\n"
"The spacings will set the distance between any two\n"
"elements of the panel array."
msgstr ""

#: appTools/ToolPanelize.py:813
msgid ""
"Choose the type of object for the panel object:\n"
"- Geometry\n"
"- Gerber"
msgstr ""

#: appTools/ToolPanelize.py:831
msgid "Constrain panel within"
msgstr ""

#: appTools/ToolPanelize.py:872
msgid "Panelize Object"
msgstr ""

#: appTools/ToolPanelize.py:874 appTools/ToolRulesCheck.py:1603
msgid ""
"Panelize the specified object around the specified box.\n"
"In other words it creates multiple copies of the source object,\n"
"arranged in a 2D array of rows and columns."
msgstr ""

#: appTools/ToolPcbWizard.py:93
msgid "PCBWizard Tool"
msgstr ""

#: appTools/ToolPcbWizard.py:179 appTools/ToolPcbWizard.py:183
msgid "Load PcbWizard Excellon file"
msgstr ""

#: appTools/ToolPcbWizard.py:202 appTools/ToolPcbWizard.py:206
msgid "Load PcbWizard INF file"
msgstr ""

#: appTools/ToolPcbWizard.py:254
msgid ""
"The INF file does not contain the tool table.\n"
"Try to open the Excellon file from File -> Open -> Excellon\n"
"and edit the drill diameters manually."
msgstr ""

#: appTools/ToolPcbWizard.py:274
msgid "PcbWizard .INF file loaded."
msgstr ""

#: appTools/ToolPcbWizard.py:278
msgid "Main PcbWizard Excellon file loaded."
msgstr ""

#: appTools/ToolPcbWizard.py:310 app_Main.py:9043
msgid "This is not Excellon file."
msgstr ""

#: appTools/ToolPcbWizard.py:313
msgid "Cannot parse file"
msgstr ""

#: appTools/ToolPcbWizard.py:336
msgid "Importing Excellon."
msgstr ""

#: appTools/ToolPcbWizard.py:343
msgid "Import Excellon file failed."
msgstr ""

#: appTools/ToolPcbWizard.py:350
msgid "Imported"
msgstr ""

#: appTools/ToolPcbWizard.py:353
msgid "Excellon merging is in progress. Please wait..."
msgstr ""

#: appTools/ToolPcbWizard.py:355
msgid "The imported Excellon file is empty."
msgstr ""

#: appTools/ToolPcbWizard.py:360
msgid "PcbWizard Import Tool"
msgstr ""

#: appTools/ToolPcbWizard.py:379
msgid "Load files"
msgstr ""

#: appTools/ToolPcbWizard.py:385
msgid "Excellon file"
msgstr ""

#: appTools/ToolPcbWizard.py:387
msgid ""
"Load the Excellon file.\n"
"Usually it has a .DRL extension"
msgstr ""

#: appTools/ToolPcbWizard.py:393
msgid "INF file"
msgstr ""

#: appTools/ToolPcbWizard.py:395
msgid "Load the INF file."
msgstr ""

#: appTools/ToolPcbWizard.py:407
msgid "Tool Number"
msgstr ""

#: appTools/ToolPcbWizard.py:409
msgid "Tool diameter in file units."
msgstr ""

#: appTools/ToolPcbWizard.py:415
msgid "Excellon format"
msgstr ""

#: appTools/ToolPcbWizard.py:423
msgid "Int. digits"
msgstr ""

#: appTools/ToolPcbWizard.py:425
msgid "The number of digits for the integral part of the coordinates."
msgstr ""

#: appTools/ToolPcbWizard.py:432
msgid "Frac. digits"
msgstr ""

#: appTools/ToolPcbWizard.py:434
msgid "The number of digits for the fractional part of the coordinates."
msgstr ""

#: appTools/ToolPcbWizard.py:441
msgid "No Suppression"
msgstr ""

#: appTools/ToolPcbWizard.py:442
msgid "Zeros supp."
msgstr ""

#: appTools/ToolPcbWizard.py:444
msgid ""
"The type of zeros suppression used.\n"
"Can be of type:\n"
"- LZ = leading zeros are kept\n"
"- TZ = trailing zeros are kept\n"
"- No Suppression = no zero suppression"
msgstr ""

#: appTools/ToolPcbWizard.py:457
msgid ""
"The type of units that the coordinates and tool\n"
"diameters are using. Can be INCH or MM."
msgstr ""

#: appTools/ToolPcbWizard.py:464
msgid "Import Excellon"
msgstr ""

#: appTools/ToolPcbWizard.py:466
msgid ""
"Import in FlatCAM an Excellon file\n"
"that store it's information's in 2 files.\n"
"One usually has .DRL extension while\n"
"the other has .INF extension."
msgstr ""

#: appTools/ToolProperties.py:116 appTools/ToolTransform.py:142 app_Main.py:4970
#: app_Main.py:7298 app_Main.py:7398 app_Main.py:7439 app_Main.py:7480 app_Main.py:7522
#: app_Main.py:7564 app_Main.py:7608 app_Main.py:7652 app_Main.py:8168 app_Main.py:8172
msgid "No object selected."
msgstr ""

#: appTools/ToolProperties.py:131
msgid "Object Properties are displayed."
msgstr ""

#: appTools/ToolProperties.py:136
msgid "Properties Tool"
msgstr ""

#: appTools/ToolProperties.py:153
msgid "TYPE"
msgstr ""

#: appTools/ToolProperties.py:154
msgid "NAME"
msgstr ""

#: appTools/ToolProperties.py:156
msgid "Dimensions"
msgstr ""

#: appTools/ToolProperties.py:184
msgid "Geo Type"
msgstr ""

#: appTools/ToolProperties.py:187
msgid "Single-Geo"
msgstr ""

#: appTools/ToolProperties.py:188
msgid "Multi-Geo"
msgstr ""

#: appTools/ToolProperties.py:199
msgid "Calculating dimensions ... Please wait."
msgstr ""

#: appTools/ToolProperties.py:342 appTools/ToolProperties.py:346
#: appTools/ToolProperties.py:348
msgid "Inch"
msgstr ""

#: appTools/ToolProperties.py:342 appTools/ToolProperties.py:347
#: appTools/ToolProperties.py:349
msgid "Metric"
msgstr ""

#: appTools/ToolProperties.py:422 appTools/ToolProperties.py:490
msgid "Drills number"
msgstr ""

#: appTools/ToolProperties.py:423 appTools/ToolProperties.py:492
msgid "Slots number"
msgstr ""

#: appTools/ToolProperties.py:425
msgid "Drills total number:"
msgstr ""

#: appTools/ToolProperties.py:426
msgid "Slots total number:"
msgstr ""

#: appTools/ToolProperties.py:453 appTools/ToolProperties.py:456
#: appTools/ToolProperties.py:459 appTools/ToolProperties.py:487
#: appTools/ToolProperties.py:494 appTools/ToolProperties.py:497
msgid "Present"
msgstr ""

#: appTools/ToolProperties.py:454 appTools/ToolProperties.py:488
msgid "Solid Geometry"
msgstr ""

#: appTools/ToolProperties.py:457 appTools/ToolProperties.py:495
msgid "GCode Text"
msgstr ""

#: appTools/ToolProperties.py:460 appTools/ToolProperties.py:498
msgid "GCode Geometry"
msgstr ""

#: appTools/ToolProperties.py:468 appTools/ToolProperties.py:541
msgid "Tool Data"
msgstr ""

#: appTools/ToolProperties.py:505
msgid "Depth of Cut"
msgstr ""

#: appTools/ToolProperties.py:517
msgid "Clearance Height"
msgstr ""

#: appTools/ToolProperties.py:555
msgid "Routing time"
msgstr ""

#: appTools/ToolProperties.py:580
msgid "Width"
msgstr ""

#: appTools/ToolProperties.py:586 appTools/ToolProperties.py:594
msgid "Box Area"
msgstr ""

#: appTools/ToolProperties.py:589 appTools/ToolProperties.py:597
msgid "Convex_Hull Area"
msgstr ""

#: appTools/ToolProperties.py:604 appTools/ToolProperties.py:607
msgid "Copper Area"
msgstr ""

#: appTools/ToolPunchGerber.py:101
msgid "Punch Tool"
msgstr ""

#: appTools/ToolPunchGerber.py:275
msgid "The value of the fixed diameter is 0.0. Aborting."
msgstr ""

#: appTools/ToolPunchGerber.py:278
msgid ""
"Could not generate punched hole Gerber because the punch hole size is bigger than some of "
"the apertures in the Gerber object."
msgstr ""

#: appTools/ToolPunchGerber.py:341
msgid ""
"Could not generate punched hole Gerber because the newly created object geometry is the "
"same as the one in the source object geometry..."
msgstr ""

#: appTools/ToolPunchGerber.py:684 appTools/ToolPunchGerber.py:977
msgid "Punch Gerber"
msgstr ""

#: appTools/ToolPunchGerber.py:719
msgid "Gerber into which to punch holes"
msgstr ""

#: appTools/ToolPunchGerber.py:739
msgid "ALL"
msgstr ""

#: appTools/ToolPunchGerber.py:820
msgid "Remove the geometry of Excellon from the Gerber to create the holes in pads."
msgstr ""

#: appTools/ToolPunchGerber.py:979
msgid ""
"Create a Gerber object from the selected object, within\n"
"the specified box."
msgstr ""

#: appTools/ToolQRCode.py:147 appTools/ToolQRCode.py:482 appTools/ToolQRCode.py:531
msgid "Cancelled. There is no QRCode Data in the text box."
msgstr ""

#: appTools/ToolQRCode.py:166
msgid "Generating QRCode geometry"
msgstr ""

#: appTools/ToolQRCode.py:206
msgid "Click on the Destination point ..."
msgstr ""

#: appTools/ToolQRCode.py:321
msgid "QRCode Tool done."
msgstr ""

#: appTools/ToolQRCode.py:514 appTools/ToolQRCode.py:518
msgid "Export PNG"
msgstr ""

#: appTools/ToolQRCode.py:561 appTools/ToolQRCode.py:565 app_Main.py:7330 app_Main.py:7334
msgid "Export SVG"
msgstr ""

#: appTools/ToolQRCode.py:658
msgid "Gerber Object to which the QRCode will be added."
msgstr ""

#: appTools/ToolQRCode.py:694
msgid "The parameters used to shape the QRCode."
msgstr ""

#: appTools/ToolQRCode.py:794
msgid "Export QRCode"
msgstr ""

#: appTools/ToolQRCode.py:796
msgid ""
"Show a set of controls allowing to export the QRCode\n"
"to a SVG file or an PNG file."
msgstr ""

#: appTools/ToolQRCode.py:835
msgid "Transparent back color"
msgstr ""

#: appTools/ToolQRCode.py:860
msgid "Export QRCode SVG"
msgstr ""

#: appTools/ToolQRCode.py:862
msgid "Export a SVG file with the QRCode content."
msgstr ""

#: appTools/ToolQRCode.py:873
msgid "Export QRCode PNG"
msgstr ""

#: appTools/ToolQRCode.py:875
msgid "Export a PNG image file with the QRCode content."
msgstr ""

#: appTools/ToolQRCode.py:886
msgid "Insert QRCode"
msgstr ""

#: appTools/ToolQRCode.py:888
msgid "Create the QRCode object."
msgstr ""

#: appTools/ToolRulesCheck.py:657 appTools/ToolRulesCheck.py:717
#: appTools/ToolRulesCheck.py:754 appTools/ToolRulesCheck.py:826
#: appTools/ToolRulesCheck.py:880 appTools/ToolRulesCheck.py:918
#: appTools/ToolRulesCheck.py:983
msgid "Value is not valid."
msgstr ""

#: appTools/ToolRulesCheck.py:671
msgid "TOP -> Copper to Copper clearance"
msgstr ""

#: appTools/ToolRulesCheck.py:682
msgid "BOTTOM -> Copper to Copper clearance"
msgstr ""

#: appTools/ToolRulesCheck.py:687 appTools/ToolRulesCheck.py:781
#: appTools/ToolRulesCheck.py:945
msgid "At least one Gerber object has to be selected for this rule but none is selected."
msgstr ""

#: appTools/ToolRulesCheck.py:723
msgid "One of the copper Gerber objects or the Outline Gerber object is not valid."
msgstr ""

#: appTools/ToolRulesCheck.py:736 appTools/ToolRulesCheck.py:900
msgid "Outline Gerber object presence is mandatory for this rule but it is not selected."
msgstr ""

#: appTools/ToolRulesCheck.py:753 appTools/ToolRulesCheck.py:780
msgid "Silk to Silk clearance"
msgstr ""

#: appTools/ToolRulesCheck.py:766
msgid "TOP -> Silk to Silk clearance"
msgstr ""

#: appTools/ToolRulesCheck.py:776
msgid "BOTTOM -> Silk to Silk clearance"
msgstr ""

#: appTools/ToolRulesCheck.py:832
msgid "One or more of the Gerber objects is not valid."
msgstr ""

#: appTools/ToolRulesCheck.py:840
msgid "TOP -> Silk to Solder Mask Clearance"
msgstr ""

#: appTools/ToolRulesCheck.py:846
msgid "BOTTOM -> Silk to Solder Mask Clearance"
msgstr ""

#: appTools/ToolRulesCheck.py:850
msgid "Both Silk and Solder Mask Gerber objects has to be either both Top or both Bottom."
msgstr ""

#: appTools/ToolRulesCheck.py:886
msgid "One of the Silk Gerber objects or the Outline Gerber object is not valid."
msgstr ""

#: appTools/ToolRulesCheck.py:930
msgid "TOP -> Minimum Solder Mask Sliver"
msgstr ""

#: appTools/ToolRulesCheck.py:940
msgid "BOTTOM -> Minimum Solder Mask Sliver"
msgstr ""

#: appTools/ToolRulesCheck.py:989
msgid "One of the Copper Gerber objects or the Excellon objects is not valid."
msgstr ""

#: appTools/ToolRulesCheck.py:1005
msgid "Excellon object presence is mandatory for this rule but none is selected."
msgstr ""

#: appTools/ToolRulesCheck.py:1078 appTools/ToolRulesCheck.py:1091
#: appTools/ToolRulesCheck.py:1102 appTools/ToolRulesCheck.py:1115
msgid "STATUS"
msgstr ""

#: appTools/ToolRulesCheck.py:1081 appTools/ToolRulesCheck.py:1105
msgid "FAILED"
msgstr ""

#: appTools/ToolRulesCheck.py:1094 appTools/ToolRulesCheck.py:1118
msgid "PASSED"
msgstr ""

#: appTools/ToolRulesCheck.py:1095 appTools/ToolRulesCheck.py:1119
msgid "Violations: There are no violations for the current rule."
msgstr ""

#: appTools/ToolRulesCheck.py:1137
msgid "Check Rules"
msgstr ""

#: appTools/ToolRulesCheck.py:1165
msgid "Gerber objects for which to check rules."
msgstr ""

#: appTools/ToolRulesCheck.py:1180
msgid "Top"
msgstr ""

#: appTools/ToolRulesCheck.py:1182
msgid "The Top Gerber Copper object for which rules are checked."
msgstr ""

#: appTools/ToolRulesCheck.py:1198
msgid "Bottom"
msgstr ""

#: appTools/ToolRulesCheck.py:1200
msgid "The Bottom Gerber Copper object for which rules are checked."
msgstr ""

#: appTools/ToolRulesCheck.py:1216
msgid "SM Top"
msgstr ""

#: appTools/ToolRulesCheck.py:1218
msgid "The Top Gerber Solder Mask object for which rules are checked."
msgstr ""

#: appTools/ToolRulesCheck.py:1234
msgid "SM Bottom"
msgstr ""

#: appTools/ToolRulesCheck.py:1236
msgid "The Bottom Gerber Solder Mask object for which rules are checked."
msgstr ""

#: appTools/ToolRulesCheck.py:1252
msgid "Silk Top"
msgstr ""

#: appTools/ToolRulesCheck.py:1254
msgid "The Top Gerber Silkscreen object for which rules are checked."
msgstr ""

#: appTools/ToolRulesCheck.py:1270
msgid "Silk Bottom"
msgstr ""

#: appTools/ToolRulesCheck.py:1272
msgid "The Bottom Gerber Silkscreen object for which rules are checked."
msgstr ""

#: appTools/ToolRulesCheck.py:1290
msgid "The Gerber Outline (Cutout) object for which rules are checked."
msgstr ""

#: appTools/ToolRulesCheck.py:1303
msgid "Excellon objects for which to check rules."
msgstr ""

#: appTools/ToolRulesCheck.py:1315
msgid "Excellon 1"
msgstr ""

#: appTools/ToolRulesCheck.py:1317
msgid ""
"Excellon object for which to check rules.\n"
"Holds the plated holes or a general Excellon file content."
msgstr ""

#: appTools/ToolRulesCheck.py:1334
msgid "Excellon 2"
msgstr ""

#: appTools/ToolRulesCheck.py:1336
msgid ""
"Excellon object for which to check rules.\n"
"Holds the non-plated holes."
msgstr ""

#: appTools/ToolRulesCheck.py:1349
msgid "All Rules"
msgstr ""

#: appTools/ToolRulesCheck.py:1351
msgid "This check/uncheck all the rules below."
msgstr ""

#: appTools/ToolRulesCheck.py:1601
msgid "Run Rules Check"
msgstr ""

#: appTools/ToolShell.py:59
msgid "Clear the text."
msgstr ""

#: appTools/ToolShell.py:91 appTools/ToolShell.py:93
msgid "...processing..."
msgstr ""

#: appTools/ToolSolderPaste.py:459
msgid "Please enter a tool diameter to add, in Float format."
msgstr ""

#: appTools/ToolSolderPaste.py:493
msgid "New Nozzle tool added to Tool Table."
msgstr ""

#: appTools/ToolSolderPaste.py:535
msgid "Nozzle tool from Tool Table was edited."
msgstr ""

#: appTools/ToolSolderPaste.py:593
msgid "Delete failed. Select a Nozzle tool to delete."
msgstr ""

#: appTools/ToolSolderPaste.py:598
msgid "Nozzle tool(s) deleted from Tool Table."
msgstr ""

#: appTools/ToolSolderPaste.py:652
msgid "No SolderPaste mask Gerber object loaded."
msgstr ""

#: appTools/ToolSolderPaste.py:670
msgid "Creating Solder Paste dispensing geometry."
msgstr ""

#: appTools/ToolSolderPaste.py:683
msgid "No Nozzle tools in the tool table."
msgstr ""

#: appTools/ToolSolderPaste.py:809
msgid "Cancelled. Empty file, it has no geometry..."
msgstr ""

#: appTools/ToolSolderPaste.py:812
msgid "Solder Paste geometry generated successfully"
msgstr ""

#: appTools/ToolSolderPaste.py:819
msgid "Some or all pads have no solder due of inadequate nozzle diameters..."
msgstr ""

#: appTools/ToolSolderPaste.py:833
msgid "Generating Solder Paste dispensing geometry..."
msgstr ""

#: appTools/ToolSolderPaste.py:852
msgid "There is no Geometry object available."
msgstr ""

#: appTools/ToolSolderPaste.py:857
msgid "This Geometry can't be processed. NOT a solder_paste_tool geometry."
msgstr ""

#: appTools/ToolSolderPaste.py:893
msgid "An internal error has ocurred. See shell.\n"
msgstr ""

#: appTools/ToolSolderPaste.py:962
msgid "ToolSolderPaste CNCjob created"
msgstr ""

#: appTools/ToolSolderPaste.py:981
msgid "SP GCode Editor"
msgstr ""

#: appTools/ToolSolderPaste.py:993 appTools/ToolSolderPaste.py:998
#: appTools/ToolSolderPaste.py:1047
msgid "This CNCJob object can't be processed. NOT a solder_paste_tool CNCJob object."
msgstr ""

#: appTools/ToolSolderPaste.py:1022
msgid "No Gcode in the object"
msgstr ""

#: appTools/ToolSolderPaste.py:1057
msgid "Export GCode ..."
msgstr ""

#: appTools/ToolSolderPaste.py:1104
msgid "Solder paste dispenser GCode file saved to"
msgstr ""

#: appTools/ToolSolderPaste.py:1114
msgid "Solder Paste Tool"
msgstr ""

#: appTools/ToolSolderPaste.py:1144
msgid "Gerber Solderpaste object."
msgstr ""

#: appTools/ToolSolderPaste.py:1157
msgid ""
"Tools pool from which the algorithm\n"
"will pick the ones used for dispensing solder paste."
msgstr ""

#: appTools/ToolSolderPaste.py:1172
msgid ""
"This is the Tool Number.\n"
"The solder dispensing will start with the tool with the biggest \n"
"diameter, continuing until there are no more Nozzle tools.\n"
"If there are no longer tools but there are still pads not covered\n"
" with solder paste, the app will issue a warning message box."
msgstr ""

#: appTools/ToolSolderPaste.py:1179
msgid ""
"Nozzle tool Diameter. It's value (in current FlatCAM units)\n"
"is the width of the solder paste dispensed."
msgstr ""

#: appTools/ToolSolderPaste.py:1186
msgid "New Nozzle Tool"
msgstr ""

#: appTools/ToolSolderPaste.py:1205
msgid ""
"Add a new nozzle tool to the Tool Table\n"
"with the diameter specified above."
msgstr ""

#: appTools/ToolSolderPaste.py:1227
msgid "STEP 1"
msgstr ""

#: appTools/ToolSolderPaste.py:1229
msgid ""
"First step is to select a number of nozzle tools for usage\n"
"and then optionally modify the GCode parameters below."
msgstr ""

#: appTools/ToolSolderPaste.py:1232
msgid ""
"Select tools.\n"
"Modify parameters."
msgstr ""

#: appTools/ToolSolderPaste.py:1352
msgid ""
"Feedrate (speed) while moving up vertically\n"
" to Dispense position (on Z plane)."
msgstr ""

#: appTools/ToolSolderPaste.py:1422
msgid ""
"Generate GCode for Solder Paste dispensing\n"
"on PCB pads."
msgstr ""

#: appTools/ToolSolderPaste.py:1443
msgid "STEP 2"
msgstr ""

#: appTools/ToolSolderPaste.py:1445
msgid ""
"Second step is to create a solder paste dispensing\n"
"geometry out of an Solder Paste Mask Gerber file."
msgstr ""

#: appTools/ToolSolderPaste.py:1449
msgid "Generate Geo"
msgstr ""

#: appTools/ToolSolderPaste.py:1451
msgid "Generate solder paste dispensing geometry."
msgstr ""

#: appTools/ToolSolderPaste.py:1474
msgid "Geo Result"
msgstr ""

#: appTools/ToolSolderPaste.py:1476
msgid ""
"Geometry Solder Paste object.\n"
"The name of the object has to end in:\n"
"'_solderpaste' as a protection."
msgstr ""

#: appTools/ToolSolderPaste.py:1485
msgid "STEP 3"
msgstr ""

#: appTools/ToolSolderPaste.py:1487
msgid ""
"Third step is to select a solder paste dispensing geometry,\n"
"and then generate a CNCJob object.\n"
"\n"
"REMEMBER: if you want to create a CNCJob with new parameters,\n"
"first you need to generate a geometry with those new params,\n"
"and only after that you can generate an updated CNCJob."
msgstr ""

#: appTools/ToolSolderPaste.py:1508
msgid "CNC Result"
msgstr ""

#: appTools/ToolSolderPaste.py:1510
msgid ""
"CNCJob Solder paste object.\n"
"In order to enable the GCode save section,\n"
"the name of the object has to end in:\n"
"'_solderpaste' as a protection."
msgstr ""

#: appTools/ToolSolderPaste.py:1520
msgid "View GCode"
msgstr ""

#: appTools/ToolSolderPaste.py:1522
msgid ""
"View the generated GCode for Solder Paste dispensing\n"
"on PCB pads."
msgstr ""

#: appTools/ToolSolderPaste.py:1532
msgid "Save GCode"
msgstr ""

#: appTools/ToolSolderPaste.py:1534
msgid ""
"Save the generated GCode for Solder Paste dispensing\n"
"on PCB pads, to a file."
msgstr ""

#: appTools/ToolSolderPaste.py:1544
msgid "STEP 4"
msgstr ""

#: appTools/ToolSolderPaste.py:1546
msgid ""
"Fourth step (and last) is to select a CNCJob made from \n"
"a solder paste dispensing geometry, and then view/save it's GCode."
msgstr ""

#: appTools/ToolSub.py:126
msgid "Sub Tool"
msgstr ""

#: appTools/ToolSub.py:147 appTools/ToolSub.py:351
msgid "No Target object loaded."
msgstr ""

#: appTools/ToolSub.py:150
msgid "Loading geometry from Gerber objects."
msgstr ""

#: appTools/ToolSub.py:162 appTools/ToolSub.py:364
msgid "No Subtractor object loaded."
msgstr ""

#: appTools/ToolSub.py:204
msgid "Finished parsing geometry for aperture"
msgstr ""

#: appTools/ToolSub.py:206
msgid "Subtraction aperture processing finished."
msgstr ""

#: appTools/ToolSub.py:326 appTools/ToolSub.py:515
msgid "Generating new object ..."
msgstr ""

#: appTools/ToolSub.py:329 appTools/ToolSub.py:518 appTools/ToolSub.py:595
msgid "Generating new object failed."
msgstr ""

#: appTools/ToolSub.py:333 appTools/ToolSub.py:523
msgid "Created"
msgstr ""

#: appTools/ToolSub.py:377
msgid "Currently, the Subtractor geometry cannot be of type Multigeo."
msgstr ""

#: appTools/ToolSub.py:417
msgid "Parsing solid_geometry ..."
msgstr ""

#: appTools/ToolSub.py:419
msgid "Parsing solid_geometry for tool"
msgstr ""

#: appTools/ToolSub.py:654
msgid ""
"Gerber object from which to subtract\n"
"the subtractor Gerber object."
msgstr ""

#: appTools/ToolSub.py:667 appTools/ToolSub.py:722
msgid "Subtractor"
msgstr ""

#: appTools/ToolSub.py:669
msgid ""
"Gerber object that will be subtracted\n"
"from the target Gerber object."
msgstr ""

#: appTools/ToolSub.py:676
msgid "Subtract Gerber"
msgstr ""

#: appTools/ToolSub.py:678
msgid ""
"Will remove the area occupied by the subtractor\n"
"Gerber from the Target Gerber.\n"
"Can be used to remove the overlapping silkscreen\n"
"over the soldermask."
msgstr ""

#: appTools/ToolSub.py:709
msgid ""
"Geometry object from which to subtract\n"
"the subtractor Geometry object."
msgstr ""

#: appTools/ToolSub.py:724
msgid ""
"Geometry object that will be subtracted\n"
"from the target Geometry object."
msgstr ""

#: appTools/ToolSub.py:732
msgid "Checking this will close the paths cut by the Geometry subtractor object."
msgstr ""

#: appTools/ToolSub.py:735
msgid "Subtract Geometry"
msgstr ""

#: appTools/ToolSub.py:737
msgid ""
"Will remove the area occupied by the subtractor\n"
"Geometry from the Target Geometry."
msgstr ""

#: appTools/ToolTransform.py:293
msgid "No object selected. Please Select an object to rotate!"
msgstr ""

#: appTools/ToolTransform.py:301
msgid "CNCJob objects can't be rotated."
msgstr ""

#: appTools/ToolTransform.py:309
msgid "Rotate done"
msgstr ""

#: appTools/ToolTransform.py:312 appTools/ToolTransform.py:353 appTools/ToolTransform.py:386
#: appTools/ToolTransform.py:414
msgid "Due of"
msgstr ""

#: appTools/ToolTransform.py:312 appTools/ToolTransform.py:353 appTools/ToolTransform.py:386
#: appTools/ToolTransform.py:414
msgid "action was not executed."
msgstr ""

#: appTools/ToolTransform.py:319
msgid "No object selected. Please Select an object to flip"
msgstr ""

#: appTools/ToolTransform.py:329
msgid "CNCJob objects can't be mirrored/flipped."
msgstr ""

#: appTools/ToolTransform.py:361
msgid "Skew transformation can not be done for 0, 90 and 180 degrees."
msgstr ""

#: appTools/ToolTransform.py:366
msgid "No object selected. Please Select an object to shear/skew!"
msgstr ""

#: appTools/ToolTransform.py:375
msgid "CNCJob objects can't be skewed."
msgstr ""

#: appTools/ToolTransform.py:383
msgid "Skew on the"
msgstr ""

#: appTools/ToolTransform.py:383 appTools/ToolTransform.py:411 appTools/ToolTransform.py:441
msgid "axis done"
msgstr ""

#: appTools/ToolTransform.py:393
msgid "No object selected. Please Select an object to scale!"
msgstr ""

#: appTools/ToolTransform.py:402
msgid "CNCJob objects can't be scaled."
msgstr ""

#: appTools/ToolTransform.py:411
msgid "Scale on the"
msgstr ""

#: appTools/ToolTransform.py:421
msgid "No object selected. Please Select an object to offset!"
msgstr ""

#: appTools/ToolTransform.py:428
msgid "CNCJob objects can't be offset."
msgstr ""

#: appTools/ToolTransform.py:441
msgid "Offset on the"
msgstr ""

#: appTools/ToolTransform.py:450
msgid "No object selected. Please Select an object to buffer!"
msgstr ""

#: appTools/ToolTransform.py:457
msgid "CNCJob objects can't be buffered."
msgstr ""

#: appTools/ToolTransform.py:512
msgid "Object Transform"
msgstr ""

#: appTools/ToolTransform.py:603
msgid ""
"The object used as reference.\n"
"The used point is the center of it's bounding box."
msgstr ""

#: appTranslation.py:105
msgid "The application will restart."
msgstr ""

#: appTranslation.py:107
msgid "Are you sure do you want to change the current language to"
msgstr ""

#: appTranslation.py:108
msgid "Apply Language ..."
msgstr ""

#: appTranslation.py:207 app_Main.py:3377
msgid ""
"There are files/objects modified in FlatCAM. \n"
"Do you want to Save the project?"
msgstr ""

#: app_Main.py:490
msgid "FlatCAM is initializing ..."
msgstr ""

#: app_Main.py:650
msgid "Could not find the Language files. The App strings are missing."
msgstr ""

#: app_Main.py:722
msgid ""
"FlatCAM is initializing ...\n"
"Canvas initialization started."
msgstr ""

#: app_Main.py:742
msgid ""
"FlatCAM is initializing ...\n"
"Canvas initialization started.\n"
"Canvas initialization finished in"
msgstr ""

#: app_Main.py:1590 app_Main.py:6984
msgid "New Project - Not saved"
msgstr ""

#: app_Main.py:1696
msgid "Found old default preferences files. Please reboot the application to update."
msgstr ""

#: app_Main.py:1763
msgid "Open Config file failed."
msgstr ""

#: app_Main.py:1778
msgid "Open Script file failed."
msgstr ""

#: app_Main.py:1804
msgid "Open Excellon file failed."
msgstr ""

#: app_Main.py:1817
msgid "Open GCode file failed."
msgstr ""

#: app_Main.py:1830
msgid "Open Gerber file failed."
msgstr ""

#: app_Main.py:2168
msgid "Select a Geometry, Gerber, Excellon or CNCJob Object to edit."
msgstr ""

#: app_Main.py:2183
msgid ""
"Simultaneous editing of tools geometry in a MultiGeo Geometry is not possible.\n"
"Edit only one geometry at a time."
msgstr ""

#: app_Main.py:2263
msgid "Editor is activated ..."
msgstr ""

#: app_Main.py:2284
msgid "Do you want to save the edited object?"
msgstr ""

#: app_Main.py:2325
msgid "Object empty after edit."
msgstr ""

#: app_Main.py:2330 app_Main.py:2348 app_Main.py:2379 app_Main.py:2395
msgid "Editor exited. Editor content saved."
msgstr ""

#: app_Main.py:2399
msgid "Select a Gerber, Geometry, Excellon or CNCJobObject to update."
msgstr ""

#: app_Main.py:2402
msgid "is updated, returning to App..."
msgstr ""

#: app_Main.py:2415
msgid "Editor exited. Editor content was not saved."
msgstr ""

#: app_Main.py:2440
msgid "Select a Gerber, Geometry, Excellon or CNCJob Object to update."
msgstr ""

#: app_Main.py:2463
msgid "Select a Gerber, Geometry or Excellon Object to update."
msgstr ""

#: app_Main.py:2567 app_Main.py:2571
msgid "Import FlatCAM Preferences"
msgstr ""

#: app_Main.py:2582
msgid "Imported Defaults from"
msgstr ""

#: app_Main.py:2602 app_Main.py:2608
msgid "Export FlatCAM Preferences"
msgstr ""

#: app_Main.py:2628
msgid "Exported preferences to"
msgstr ""

#: app_Main.py:2648 app_Main.py:2653
msgid "Save to file"
msgstr ""

#: app_Main.py:2677
msgid "Could not load the file."
msgstr ""

#: app_Main.py:2693
msgid "Exported file to"
msgstr ""

#: app_Main.py:2730
msgid "Failed to open recent files file for writing."
msgstr ""

#: app_Main.py:2741
msgid "Failed to open recent projects file for writing."
msgstr ""

#: app_Main.py:2796
msgid "2D Computer-Aided Printed Circuit Board Manufacturing"
msgstr ""

#: app_Main.py:2797
msgid "Development"
msgstr ""

#: app_Main.py:2798
msgid "DOWNLOAD"
msgstr ""

#: app_Main.py:2799
msgid "Issue tracker"
msgstr ""

#: app_Main.py:2818
msgid "Licensed under the MIT license"
msgstr ""

#: app_Main.py:2827
msgid ""
"Permission is hereby granted, free of charge, to any person obtaining a copy\n"
"of this software and associated documentation files (the \"Software\"), to deal\n"
"in the Software without restriction, including without limitation the rights\n"
"to use, copy, modify, merge, publish, distribute, sublicense, and/or sell\n"
"copies of the Software, and to permit persons to whom the Software is\n"
"furnished to do so, subject to the following conditions:\n"
"\n"
"The above copyright notice and this permission notice shall be included in\n"
"all copies or substantial portions of the Software.\n"
"\n"
"THE SOFTWARE IS PROVIDED \"AS IS\", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR\n"
"IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,\n"
"FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE\n"
"AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER\n"
"LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,\n"
"OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN\n"
"THE SOFTWARE."
msgstr ""

#: app_Main.py:2849
msgid ""
"Some of the icons used are from the following sources:<br><div>Icons by <a href=\"https://"
"www.flaticon.com/authors/freepik\" title=\"Freepik\">Freepik</a> from <a href=\"https://"
"www.flaticon.com/\"             title=\"Flaticon\">www.flaticon.com</a></div><div>Icons "
"by <a target=\"_blank\" href=\"https://icons8.com\">Icons8</a></div>Icons by <a href="
"\"http://www.onlinewebfonts.com\">oNline Web Fonts</a><div>Icons by <a href=\"https://www."
"flaticon.com/authors/pixel-perfect\" title=\"Pixel perfect\">Pixel perfect</a> from <a "
"href=\"https://www.flaticon.com/\" title=\"Flaticon\">www.flaticon.com</a></div>"
msgstr ""

#: app_Main.py:2885
msgid "Splash"
msgstr ""

#: app_Main.py:2891
msgid "Programmers"
msgstr ""

#: app_Main.py:2897
msgid "Translators"
msgstr ""

#: app_Main.py:2903
msgid "License"
msgstr ""

#: app_Main.py:2909
msgid "Attributions"
msgstr ""

#: app_Main.py:2932
msgid "Programmer"
msgstr ""

#: app_Main.py:2933
msgid "Status"
msgstr ""

#: app_Main.py:2934 app_Main.py:3014
msgid "E-mail"
msgstr ""

#: app_Main.py:2937
msgid "Program Author"
msgstr ""

#: app_Main.py:2942
msgid "BETA Maintainer >= 2019"
msgstr ""

#: app_Main.py:3011
msgid "Language"
msgstr ""

#: app_Main.py:3012
msgid "Translator"
msgstr ""

#: app_Main.py:3013
msgid "Corrections"
msgstr ""

#: app_Main.py:3098
msgid "Important Information's"
msgstr ""

#: app_Main.py:3146
#, python-format
msgid "This program is %s and free in a very wide meaning of the word."
msgstr ""

#: app_Main.py:3147
msgid "Yet it cannot evolve without <b>contributions</b>."
msgstr ""

#: app_Main.py:3148
msgid "If you want to see this application grow and become better and better"
msgstr ""

#: app_Main.py:3149
msgid "you can <b>contribute</b> to the development yourself by:"
msgstr ""

#: app_Main.py:3150
msgid "Pull Requests on the Bitbucket repository, if you are a developer"
msgstr ""

#: app_Main.py:3152
msgid "Bug Reports by providing the steps required to reproduce the bug"
msgstr ""

#: app_Main.py:3183
msgid "Contribute"
msgstr ""

#: app_Main.py:3206
msgid "Links Exchange"
msgstr ""

#: app_Main.py:3218 app_Main.py:3237
msgid "Soon ..."
msgstr ""

#: app_Main.py:3225
msgid "How To's"
msgstr ""

#: app_Main.py:3337
msgid ""
"This entry will resolve to another website if:\n"
"\n"
"1. FlatCAM.org website is down\n"
"2. Someone forked FlatCAM project and wants to point\n"
"to his own website\n"
"\n"
"If you can't get any informations about FlatCAM beta\n"
"use the YouTube channel link from the Help menu."
msgstr ""

#: app_Main.py:3344
msgid "Alternative website"
msgstr ""

#: app_Main.py:3695
msgid "Selected Excellon file extensions registered with FlatCAM."
msgstr ""

#: app_Main.py:3717
msgid "Selected GCode file extensions registered with FlatCAM."
msgstr ""

#: app_Main.py:3739
msgid "Selected Gerber file extensions registered with FlatCAM."
msgstr ""

#: app_Main.py:3927 app_Main.py:3988 app_Main.py:4018
msgid "At least two objects are required for join. Objects currently selected"
msgstr ""

#: app_Main.py:3936
msgid ""
"Failed join. The Geometry objects are of different types.\n"
"At least one is MultiGeo type and the other is SingleGeo type. A possibility is to "
"convert from one to another and retry joining \n"
"but in the case of converting from MultiGeo to SingleGeo, informations may be lost and "
"the result may not be what was expected. \n"
"Check the generated GCODE."
msgstr ""

#: app_Main.py:3950 app_Main.py:3960
msgid "Geometry merging finished"
msgstr ""

#: app_Main.py:3983
msgid "Failed. Excellon joining works only on Excellon objects."
msgstr ""

#: app_Main.py:3995
msgid "Excellon merging finished"
msgstr ""

#: app_Main.py:4013
msgid "Failed. Gerber joining works only on Gerber objects."
msgstr ""

#: app_Main.py:4023
msgid "Gerber merging finished"
msgstr ""

#: app_Main.py:4043 app_Main.py:4080
msgid "Failed. Select a Geometry Object and try again."
msgstr ""

#: app_Main.py:4047 app_Main.py:4085
msgid "Expected a GeometryObject, got"
msgstr ""

#: app_Main.py:4062
msgid "A Geometry object was converted to MultiGeo type."
msgstr ""

#: app_Main.py:4100
msgid "A Geometry object was converted to SingleGeo type."
msgstr ""

#: app_Main.py:4333
msgid "Toggle Units"
msgstr ""

#: app_Main.py:4337
msgid ""
"Changing the units of the project\n"
"will scale all objects.\n"
"\n"
"Do you want to continue?"
msgstr ""

#: app_Main.py:4340 app_Main.py:4503 app_Main.py:4586 app_Main.py:7304 app_Main.py:7320
#: app_Main.py:7658 app_Main.py:7670
msgid "Ok"
msgstr ""

#: app_Main.py:4390
msgid "Converted units to"
msgstr ""

#: app_Main.py:4430
msgid "Workspace enabled."
msgstr ""

#: app_Main.py:4433
msgid "Workspace disabled."
msgstr ""

#: app_Main.py:4497
msgid ""
"Adding Tool works only when Advanced is checked.\n"
"Go to Preferences -> General - Show Advanced Options."
msgstr ""

#: app_Main.py:4579
msgid "Delete objects"
msgstr ""

#: app_Main.py:4584
msgid ""
"Are you sure you want to permanently delete\n"
"the selected objects?"
msgstr ""

#: app_Main.py:4627
msgid "Object(s) deleted"
msgstr ""

#: app_Main.py:4631
msgid "Save the work in Editor and try again ..."
msgstr ""

#: app_Main.py:4660
msgid "Object deleted"
msgstr ""

#: app_Main.py:4687
msgid "Click to set the origin ..."
msgstr ""

#: app_Main.py:4709
msgid "Setting Origin..."
msgstr ""

#: app_Main.py:4722 app_Main.py:4824
msgid "Origin set"
msgstr ""

#: app_Main.py:4739
msgid "Origin coordinates specified but incomplete."
msgstr ""

#: app_Main.py:4780
msgid "Moving to Origin..."
msgstr ""

#: app_Main.py:4861
msgid "Jump to ..."
msgstr ""

#: app_Main.py:4862
msgid "Enter the coordinates in format X,Y:"
msgstr ""

#: app_Main.py:4872
msgid "Wrong coordinates. Enter coordinates in format: X,Y"
msgstr ""

#: app_Main.py:4989
msgid "Bottom-Left"
msgstr ""

#: app_Main.py:4992
msgid "Top-Right"
msgstr ""

#: app_Main.py:5013
msgid "Locate ..."
msgstr ""

#: app_Main.py:5286 app_Main.py:5361 app_Main.py:5524
msgid "No object is selected. Select an object and try again."
msgstr ""

#: app_Main.py:5550
msgid "Aborting. The current task will be gracefully closed as soon as possible..."
msgstr ""

#: app_Main.py:5556
msgid "The current task was gracefully closed on user request..."
msgstr ""

#: app_Main.py:5746
msgid "Tools in Tools Database edited but not saved."
msgstr ""

#: app_Main.py:5785
msgid "Adding tool from DB is not allowed for this object."
msgstr ""

#: app_Main.py:5803
msgid ""
"One or more Tools are edited.\n"
"Do you want to update the Tools Database?"
msgstr ""

#: app_Main.py:5805
msgid "Save Tools Database"
msgstr ""

#: app_Main.py:5851
msgid "No object selected to Flip on Y axis."
msgstr ""

#: app_Main.py:5877
msgid "Flip on Y axis done."
msgstr ""

#: app_Main.py:5899
msgid "No object selected to Flip on X axis."
msgstr ""

#: app_Main.py:5925
msgid "Flip on X axis done."
msgstr ""

#: app_Main.py:5947
msgid "No object selected to Rotate."
msgstr ""

#: app_Main.py:5950 app_Main.py:6001 app_Main.py:6038
msgid "Transform"
msgstr ""

#: app_Main.py:5950 app_Main.py:6001 app_Main.py:6038
msgid "Enter the Angle value:"
msgstr ""

#: app_Main.py:5980
msgid "Rotation done."
msgstr ""

#: app_Main.py:5982
msgid "Rotation movement was not executed."
msgstr ""

#: app_Main.py:5999
msgid "No object selected to Skew/Shear on X axis."
msgstr ""

#: app_Main.py:6020
msgid "Skew on X axis done."
msgstr ""

#: app_Main.py:6036
msgid "No object selected to Skew/Shear on Y axis."
msgstr ""

#: app_Main.py:6057
msgid "Skew on Y axis done."
msgstr ""

#: app_Main.py:6139
msgid "New Grid ..."
msgstr ""

#: app_Main.py:6140
msgid "Enter a Grid Value:"
msgstr ""

#: app_Main.py:6148 app_Main.py:6172
msgid "Please enter a grid value with non-zero value, in Float format."
msgstr ""

#: app_Main.py:6153
msgid "New Grid added"
msgstr ""

#: app_Main.py:6155
msgid "Grid already exists"
msgstr ""

#: app_Main.py:6157
msgid "Adding New Grid cancelled"
msgstr ""

#: app_Main.py:6178
msgid " Grid Value does not exist"
msgstr ""

#: app_Main.py:6180
msgid "Grid Value deleted"
msgstr ""

#: app_Main.py:6182
msgid "Delete Grid value cancelled"
msgstr ""

#: app_Main.py:6188
msgid "Key Shortcut List"
msgstr ""

#: app_Main.py:6225
msgid " No object selected to copy it's name"
msgstr ""

#: app_Main.py:6229
msgid "Name copied on clipboard ..."
msgstr ""

#: app_Main.py:6869
msgid ""
"There are files/objects opened in FlatCAM.\n"
"Creating a New project will delete them.\n"
"Do you want to Save the project?"
msgstr ""

#: app_Main.py:6892
msgid "New Project created"
msgstr ""

#: app_Main.py:7098 app_Main.py:7137 app_Main.py:7181 app_Main.py:7251 app_Main.py:8037
#: app_Main.py:9284 app_Main.py:9346
msgid ""
"Canvas initialization started.\n"
"Canvas initialization finished in"
msgstr ""

#: app_Main.py:7100
msgid "Opening Gerber file."
msgstr ""

#: app_Main.py:7139
msgid "Opening Excellon file."
msgstr ""

#: app_Main.py:7170 app_Main.py:7175
msgid "Open G-Code"
msgstr ""

#: app_Main.py:7183
msgid "Opening G-Code file."
msgstr ""

#: app_Main.py:7242 app_Main.py:7246
msgid "Open HPGL2"
msgstr ""

#: app_Main.py:7253
msgid "Opening HPGL2 file."
msgstr ""

#: app_Main.py:7276 app_Main.py:7279
msgid "Open Configuration File"
msgstr ""

#: app_Main.py:7299 app_Main.py:7653
msgid "Please Select a Geometry object to export"
msgstr ""

#: app_Main.py:7315
msgid "Only Geometry, Gerber and CNCJob objects can be used."
msgstr ""

#: app_Main.py:7360
msgid "Data must be a 3D array with last dimension 3 or 4"
msgstr ""

#: app_Main.py:7366 app_Main.py:7370
msgid "Export PNG Image"
msgstr ""

#: app_Main.py:7403 app_Main.py:7613
msgid "Failed. Only Gerber objects can be saved as Gerber files..."
msgstr ""

#: app_Main.py:7415
msgid "Save Gerber source file"
msgstr ""

#: app_Main.py:7444
msgid "Failed. Only Script objects can be saved as TCL Script files..."
msgstr ""

#: app_Main.py:7456
msgid "Save Script source file"
msgstr ""

#: app_Main.py:7485
msgid "Failed. Only Document objects can be saved as Document files..."
msgstr ""

#: app_Main.py:7497
msgid "Save Document source file"
msgstr ""

#: app_Main.py:7527 app_Main.py:7569 app_Main.py:8520
msgid "Failed. Only Excellon objects can be saved as Excellon files..."
msgstr ""

#: app_Main.py:7535 app_Main.py:7540
msgid "Save Excellon source file"
msgstr ""

#: app_Main.py:7577 app_Main.py:7581
msgid "Export Excellon"
msgstr ""

#: app_Main.py:7621 app_Main.py:7625
msgid "Export Gerber"
msgstr ""

#: app_Main.py:7665
msgid "Only Geometry objects can be used."
msgstr ""

#: app_Main.py:7681 app_Main.py:7685
msgid "Export DXF"
msgstr ""

#: app_Main.py:7710 app_Main.py:7713
msgid "Import SVG"
msgstr ""

#: app_Main.py:7741 app_Main.py:7745
msgid "Import DXF"
msgstr ""

#: app_Main.py:7799 app_Main.py:7803
msgid "Select an Gerber or Excellon file to view it's source file."
msgstr ""

#: app_Main.py:7806
msgid "Viewing the source code of the selected object."
msgstr ""

#: app_Main.py:7820
msgid "Source Editor"
msgstr ""

#: app_Main.py:7856 app_Main.py:7863
msgid "There is no selected object for which to see it's source file code."
msgstr ""

#: app_Main.py:7871
msgid "Failed to load the source code for the selected object"
msgstr ""

#: app_Main.py:7904
msgid "Go to Line ..."
msgstr ""

#: app_Main.py:7905
msgid "Line:"
msgstr ""

#: app_Main.py:7932
msgid "New TCL script file created in Code Editor."
msgstr ""

#: app_Main.py:7971 app_Main.py:7973 app_Main.py:8009 app_Main.py:8011
msgid "Open TCL script"
msgstr ""

#: app_Main.py:8039
msgid "Executing ScriptObject file."
msgstr ""

#: app_Main.py:8047 app_Main.py:8050
msgid "Run TCL script"
msgstr ""

#: app_Main.py:8073
msgid "TCL script file opened in Code Editor and executed."
msgstr ""

#: app_Main.py:8124 app_Main.py:8130
msgid "Save Project As ..."
msgstr ""

#: app_Main.py:8165
msgid "FlatCAM objects print"
msgstr ""

#: app_Main.py:8178 app_Main.py:8185
msgid "Save Object as PDF ..."
msgstr ""

#: app_Main.py:8194
msgid "Printing PDF ... Please wait."
msgstr ""

#: app_Main.py:8373
msgid "PDF file saved to"
msgstr ""

#: app_Main.py:8398
msgid "Exporting SVG"
msgstr ""

#: app_Main.py:8441
msgid "SVG file exported to"
msgstr ""

#: app_Main.py:8467
msgid "Save cancelled because source file is empty. Try to export the file."
msgstr ""

#: app_Main.py:8618
msgid "Excellon file exported to"
msgstr ""

#: app_Main.py:8627
msgid "Exporting Excellon"
msgstr ""

#: app_Main.py:8632 app_Main.py:8639
msgid "Could not export Excellon file."
msgstr ""

#: app_Main.py:8755
msgid "Gerber file exported to"
msgstr ""

#: app_Main.py:8763
msgid "Exporting Gerber"
msgstr ""

#: app_Main.py:8768 app_Main.py:8775
msgid "Could not export file."
msgstr ""

#: app_Main.py:8823
msgid "DXF file exported to"
msgstr ""

#: app_Main.py:8832
msgid "Exporting DXF"
msgstr ""

#: app_Main.py:8837 app_Main.py:8844
msgid "Could not export DXF file."
msgstr ""

#: app_Main.py:8886
msgid "Importing SVG"
msgstr ""

#: app_Main.py:8894 app_Main.py:8949
msgid "Import failed."
msgstr ""

#: app_Main.py:8941
msgid "Importing DXF"
msgstr ""

#: app_Main.py:8982 app_Main.py:9173 app_Main.py:9238
msgid "Failed to open file"
msgstr ""

#: app_Main.py:8985 app_Main.py:9176 app_Main.py:9241
msgid "Failed to parse file"
msgstr ""

#: app_Main.py:8997
msgid "Object is not Gerber file or empty. Aborting object creation."
msgstr ""

#: app_Main.py:9002
msgid "Opening Gerber"
msgstr ""

#: app_Main.py:9013
msgid "Open Gerber failed. Probable not a Gerber file."
msgstr ""

#: app_Main.py:9046
msgid "Cannot open file"
msgstr ""

#: app_Main.py:9066
msgid "Opening Excellon."
msgstr ""

#: app_Main.py:9076
msgid "Open Excellon file failed. Probable not an Excellon file."
msgstr ""

#: app_Main.py:9108
msgid "Reading GCode file"
msgstr ""

#: app_Main.py:9121
msgid "This is not GCODE"
msgstr ""

#: app_Main.py:9126
msgid "Opening G-Code."
msgstr ""

#: app_Main.py:9139
msgid ""
"Failed to create CNCJob Object. Probable not a GCode file. Try to load it from File "
"menu.\n"
" Attempting to create a FlatCAM CNCJob Object from G-Code file failed during processing"
msgstr ""

#: app_Main.py:9195
msgid "Object is not HPGL2 file or empty. Aborting object creation."
msgstr ""

#: app_Main.py:9200
msgid "Opening HPGL2"
msgstr ""

#: app_Main.py:9207
msgid " Open HPGL2 failed. Probable not a HPGL2 file."
msgstr ""

#: app_Main.py:9233
msgid "TCL script file opened in Code Editor."
msgstr ""

#: app_Main.py:9253
msgid "Opening TCL Script..."
msgstr ""

#: app_Main.py:9264
msgid "Failed to open TCL Script."
msgstr ""

#: app_Main.py:9286
msgid "Opening FlatCAM Config file."
msgstr ""

#: app_Main.py:9314
msgid "Failed to open config file"
msgstr ""

#: app_Main.py:9343
msgid "Loading Project ... Please Wait ..."
msgstr ""

#: app_Main.py:9348
msgid "Opening FlatCAM Project file."
msgstr ""

#: app_Main.py:9363 app_Main.py:9367 app_Main.py:9384
msgid "Failed to open project file"
msgstr ""

#: app_Main.py:9423
msgid "Loading Project ... restoring"
msgstr ""

#: app_Main.py:9431
msgid "Project loaded from"
msgstr ""

#: app_Main.py:9457
msgid "Redrawing all objects"
msgstr ""

#: app_Main.py:9545
msgid "Failed to load recent item list."
msgstr ""

#: app_Main.py:9552
msgid "Failed to parse recent item list."
msgstr ""

#: app_Main.py:9562
msgid "Failed to load recent projects item list."
msgstr ""

#: app_Main.py:9569
msgid "Failed to parse recent project item list."
msgstr ""

#: app_Main.py:9630
msgid "Clear Recent projects"
msgstr ""

#: app_Main.py:9654
msgid "Clear Recent files"
msgstr ""

#: app_Main.py:9756
msgid "Selected Tab - Choose an Item from Project Tab"
msgstr ""

#: app_Main.py:9757
msgid "Details"
msgstr ""

#: app_Main.py:9759
msgid "The normal flow when working with the application is the following:"
msgstr ""

#: app_Main.py:9760
msgid ""
"Load/Import a Gerber, Excellon, Gcode, DXF, Raster Image or SVG file into the application "
"using either the toolbars, key shortcuts or even dragging and dropping the files on the "
"GUI."
msgstr ""

#: app_Main.py:9763
msgid ""
"You can also load a project by double clicking on the project file, drag and drop of the "
"file into the GUI or through the menu (or toolbar) actions offered within the app."
msgstr ""

#: app_Main.py:9766
msgid ""
"Once an object is available in the Project Tab, by selecting it and then focusing on "
"SELECTED TAB (more simpler is to double click the object name in the Project Tab, "
"SELECTED TAB will be updated with the object properties according to its kind: Gerber, "
"Excellon, Geometry or CNCJob object."
msgstr ""

#: app_Main.py:9770
msgid ""
"If the selection of the object is done on the canvas by single click instead, and the "
"SELECTED TAB is in focus, again the object properties will be displayed into the Selected "
"Tab. Alternatively, double clicking on the object on the canvas will bring the SELECTED "
"TAB and populate it even if it was out of focus."
msgstr ""

#: app_Main.py:9774
msgid "You can change the parameters in this screen and the flow direction is like this:"
msgstr ""

#: app_Main.py:9775
msgid ""
"Gerber/Excellon Object --> Change Parameter --> Generate Geometry --> Geometry Object --> "
"Add tools (change param in Selected Tab) --> Generate CNCJob --> CNCJob Object --> Verify "
"GCode (through Edit CNC Code) and/or append/prepend to GCode (again, done in SELECTED "
"TAB) --> Save GCode."
msgstr ""

#: app_Main.py:9779
msgid ""
"A list of key shortcuts is available through an menu entry in Help --> Shortcuts List or "
"through its own key shortcut: <b>F3</b>."
msgstr ""

#: app_Main.py:9843
msgid "Failed checking for latest version. Could not connect."
msgstr ""

#: app_Main.py:9850
msgid "Could not parse information about latest version."
msgstr ""

#: app_Main.py:9860
msgid "FlatCAM is up to date!"
msgstr ""

#: app_Main.py:9865
msgid "Newer Version Available"
msgstr ""

#: app_Main.py:9867
msgid "There is a newer version of FlatCAM available for download:"
msgstr ""

#: app_Main.py:9871
msgid "info"
msgstr ""

#: app_Main.py:9899
msgid ""
"OpenGL canvas initialization failed. HW or HW configuration not supported.Change the "
"graphic engine to Legacy(2D) in Edit -> Preferences -> General tab.\n"
"\n"
msgstr ""

#: app_Main.py:9977
msgid "All plots disabled."
msgstr ""

#: app_Main.py:9984
msgid "All non selected plots disabled."
msgstr ""

#: app_Main.py:9991
msgid "All plots enabled."
msgstr ""

#: app_Main.py:9997
msgid "Selected plots enabled..."
msgstr ""

#: app_Main.py:10005
msgid "Selected plots disabled..."
msgstr ""

#: app_Main.py:10038
msgid "Enabling plots ..."
msgstr ""

#: app_Main.py:10087
msgid "Disabling plots ..."
msgstr ""

#: app_Main.py:10110
msgid "Working ..."
msgstr ""

#: app_Main.py:10219
msgid "Set alpha level ..."
msgstr ""

#: app_Main.py:10285
msgid "Saving FlatCAM Project"
msgstr ""

#: app_Main.py:10308 app_Main.py:10344
msgid "Project saved to"
msgstr ""

#: app_Main.py:10315
msgid "The object is used by another application."
msgstr ""

#: app_Main.py:10329
msgid "Failed to verify project file"
msgstr ""

#: app_Main.py:10329 app_Main.py:10337 app_Main.py:10347
msgid "Retry to save it."
msgstr ""

#: app_Main.py:10337 app_Main.py:10347
msgid "Failed to parse saved project file"
msgstr ""

#: assets/linux/flatcam-beta.desktop:3
msgid "FlatCAM Beta"
msgstr ""

#: assets/linux/flatcam-beta.desktop:8
msgid "G-Code from GERBERS"
msgstr ""

#: camlib.py:656
msgid "self.solid_geometry is neither BaseGeometry or list."
msgstr ""

#: camlib.py:1049
msgid "Pass"
msgstr ""

#: camlib.py:1071
msgid "Get Exteriors"
msgstr ""

#: camlib.py:1074
msgid "Get Interiors"
msgstr ""

#: camlib.py:2331
msgid "Failed to mirror. No object selected"
msgstr ""

#: camlib.py:2396
msgid "Object was rotated"
msgstr ""

#: camlib.py:2398
msgid "Failed to rotate. No object selected"
msgstr ""

#: camlib.py:2464
msgid "Object was skewed"
msgstr ""

#: camlib.py:2466
msgid "Failed to skew. No object selected"
msgstr ""

#: camlib.py:2542
msgid "Object was buffered"
msgstr ""

#: camlib.py:2544
msgid "Failed to buffer. No object selected"
msgstr ""

#: camlib.py:2793
msgid "There is no such parameter"
msgstr ""

#: camlib.py:3000 camlib.py:4941 camlib.py:5701
msgid "Indexing geometry before generating G-Code..."
msgstr ""

#: camlib.py:3030 camlib.py:3665 camlib.py:3901
msgid ""
"The Cut Z parameter has positive value. It is the depth value to drill into material.\n"
"The Cut Z parameter needs to have a negative value, assuming it is a typo therefore the "
"app will convert the value to negative. Check the resulting CNC code (Gcode etc)."
msgstr ""

#: camlib.py:3037
msgid "The Cut Z parameter is zero. There will be no cut, aborting"
msgstr ""

#: camlib.py:3164 camlib.py:5250
msgid "The End X,Y format has to be (x, y)."
msgstr ""

#: camlib.py:3240 camlib.py:3749 camlib.py:3982 camlib.py:5015 camlib.py:5341 camlib.py:5778
msgid "Starting G-Code for tool with diameter"
msgstr ""

#: camlib.py:3365 camlib.py:3870 camlib.py:4103 camlib.py:6715
msgid "G91 coordinates not implemented"
msgstr ""

#: camlib.py:3374
#, python-format
msgid "Finished G-Code generation for tool: %s"
msgstr ""

#: camlib.py:3424
msgid ""
"The Toolchange X,Y field in Edit -> Preferences has to be in the format (x, y) \n"
"but now there is only one value, not two. "
msgstr ""

#: camlib.py:3436 camlib.py:4850 camlib.py:5609
msgid ""
"The End Move X,Y field in Edit -> Preferences has to be in the format (x, y) but now "
"there is only one value, not two."
msgstr ""

#: camlib.py:3675 camlib.py:3911 camlib.py:4904 camlib.py:5191 camlib.py:5659
msgid "The Cut Z parameter is zero. There will be no cut, skipping file"
msgstr ""

#: camlib.py:4757
msgid "Finished G-Code generation..."
msgstr ""

#: camlib.py:4873
msgid ""
"The Toolchange X,Y field in Edit -> Preferences has to be in the format (x, y) \n"
"but now there is only one value, not two."
msgstr ""

#: camlib.py:4887 camlib.py:5175 camlib.py:5642
msgid "Cut_Z parameter is None or zero. Most likely a bad combinations of other parameters."
msgstr ""

#: camlib.py:4896 camlib.py:5183 camlib.py:5651
msgid ""
"The Cut Z parameter has positive value. It is the depth value to cut into material.\n"
"The Cut Z parameter needs to have a negative value, assuming it is a typo therefore the "
"app will convert the value to negative.Check the resulting CNC code (Gcode etc)."
msgstr ""

#: camlib.py:4909 camlib.py:5196 camlib.py:5665
msgid "Travel Z parameter is None or zero."
msgstr ""

#: camlib.py:4914 camlib.py:5201 camlib.py:5670
msgid ""
"The Travel Z parameter has negative value. It is the height value to travel between "
"cuts.\n"
"The Z Travel parameter needs to have a positive value, assuming it is a typo therefore "
"the app will convert the value to positive.Check the resulting CNC code (Gcode etc)."
msgstr ""

#: camlib.py:4922 camlib.py:5209 camlib.py:5678
msgid "The Z Travel parameter is zero. This is dangerous, skipping file"
msgstr ""

#: camlib.py:5086 camlib.py:5447 camlib.py:5852
msgid "Finished G-Code generation"
msgstr ""

#: camlib.py:5086 camlib.py:5447
msgid "paths traced"
msgstr ""

#: camlib.py:5500
msgid "Trying to generate a CNC Job from a Geometry object without solid_geometry."
msgstr ""

#: camlib.py:5542
msgid ""
"The Tool Offset value is too negative to use for the current_geometry.\n"
"Raise the value (in module) and try again."
msgstr ""

#: camlib.py:5852
msgid " paths traced."
msgstr ""

#: camlib.py:5880
msgid "There is no tool data in the SolderPaste geometry."
msgstr ""

#: camlib.py:5969
msgid "Finished SolderPaste G-Code generation"
msgstr ""

#: camlib.py:5969
msgid "paths traced."
msgstr ""

#: camlib.py:6292
msgid "Parsing GCode file. Number of lines"
msgstr ""

#: camlib.py:6404
msgid "Creating Geometry from the parsed GCode file. "
msgstr ""

#: camlib.py:6461
msgid "Parsing GCode file for tool diameter"
msgstr ""

#: camlib.py:6462
msgid "Number of lines"
msgstr ""

#: camlib.py:6551
msgid "Creating Geometry from the parsed GCode file for tool diameter"
msgstr ""

#: camlib.py:6985 camlib.py:7133 camlib.py:7302
msgid "G91 coordinates not implemented ..."
msgstr ""

#: defaults.py:845
msgid "Could not load defaults file."
msgstr ""

#: defaults.py:858
msgid "Failed to parse defaults file."
msgstr ""

#: tclCommands/TclCommandBbox.py:75 tclCommands/TclCommandNregions.py:74
msgid "Expected GerberObject or GeometryObject, got"
msgstr ""

#: tclCommands/TclCommandBounds.py:67 tclCommands/TclCommandBounds.py:71
msgid "Expected a list of objects names separated by comma. Got"
msgstr ""

#: tclCommands/TclCommandBounds.py:81
msgid "TclCommand Bounds done."
msgstr ""

#: tclCommands/TclCommandCopperClear.py:287 tclCommands/TclCommandPaint.py:283
#: tclCommands/TclCommandScale.py:81
msgid "Could not retrieve box object"
msgstr ""

#: tclCommands/TclCommandCopperClear.py:310
msgid "Expected either -box <value> or -all."
msgstr ""

#: tclCommands/TclCommandGeoCutout.py:147
msgid "The name of the object for which cutout is done is missing. Add it and retry."
msgstr ""

#: tclCommands/TclCommandGeoCutout.py:189
msgid "Gaps value can be only one of: 'lr', 'tb', '2lr', '2tb', 4 or 8."
msgstr ""

#: tclCommands/TclCommandGeoCutout.py:301 tclCommands/TclCommandGeoCutout.py:356
msgid "Any-form Cutout operation finished."
msgstr ""

#: tclCommands/TclCommandGeoCutout.py:362
msgid "Cancelled. Object type is not supported."
msgstr ""

#: tclCommands/TclCommandHelp.py:75
msgid "Available commands:"
msgstr ""

#: tclCommands/TclCommandHelp.py:115
msgid "Type help <command_name> for usage."
msgstr ""

#: tclCommands/TclCommandHelp.py:115
msgid "Example: help open_gerber"
msgstr ""

#: tclCommands/TclCommandPaint.py:250 tclCommands/TclCommandPaint.py:256
msgid "Expected a tuple value like -single 3.2,0.1."
msgstr ""

#: tclCommands/TclCommandPaint.py:276
msgid "Expected -box <value>."
msgstr ""

#: tclCommands/TclCommandPaint.py:297
msgid ""
"None of the following args: 'box', 'single', 'all' were used.\n"
"Paint failed."
msgstr ""

#: tclCommands/TclCommandScale.py:106
msgid ""
"Expected -origin <origin> or -origin <min_bounds> or -origin <center> or - origin 3.0,4.2."
msgstr ""

#: tclCommands/TclCommandScale.py:119
msgid "Expected -x <value> -y <value>."
msgstr ""

#: tclCommands/TclCommandSetOrigin.py:95
msgid "Expected a pair of (x, y) coordinates. Got"
msgstr ""

#: tclCommands/TclCommandSetOrigin.py:101
msgid "Origin set by offsetting all loaded objects with "
msgstr ""

#: tclCommands/TclCommandSubtractRectangle.py:62
msgid "No Geometry name in args. Provide a name and try again."
msgstr ""

#~ msgid ""
#~ "How much (fraction) of the tool width to overlap each tool pass.\n"
#~ "Example:\n"
#~ "A value here of 0.25 means 25\\% from the tool diameter found above.\n"
#~ "\n"
#~ "Adjust the value starting with lower values\n"
#~ "and increasing it if areas that should be painted are still \n"
#~ "not painted.\n"
#~ "Lower values = faster processing, faster execution on PCB.\n"
#~ "Higher values = slow processing and slow execution on CNC\n"
#~ "due of too many paths."
#~ msgstr ""
#~ "How much (fraction) of the tool width to overlap each tool pass.\n"
#~ "Example:\n"
#~ "A value here of 0.25 means 25\\% from the tool diameter found above.\n"
#~ "\n"
#~ "Adjust the value starting with lower values\n"
#~ "and increasing it if areas that should be painted are still \n"
#~ "not painted.\n"
#~ "Lower values = faster processing, faster execution on PCB.\n"
#~ "Higher values = slow processing and slow execution on CNC\n"
#~ "due of too many paths."

#~| msgid "z_toolchange = Z coord for Toolchange"
#~ msgid "z_cut = Z coord for Toolchange"
#~ msgstr "z_cut = Z coord for Toolchange"

#~| msgid "z_toolchange = Z coord for Toolchange"
#~ msgid "z_move = Z coord for Toolchange"
#~ msgstr "z_move = Z coord for Toolchange"

#~ msgid "%s/Project_%s"
#~ msgstr "%s/Project_%s"

#~ msgid "tool_tab"
#~ msgstr "tool_tab"