FlatCAM/locale/ro/LC_MESSAGES/strings.po

# SOME DESCRIPTIVE TITLE.
# Copyright (C) YEAR ORGANIZATION
# FIRST AUTHOR <EMAIL@ADDRESS>, YEAR.
#
msgid ""
msgstr ""
"Project-Id-Version: \n"
"POT-Creation-Date: 2019-09-26 19:55+0300\n"
"PO-Revision-Date: 2019-09-26 19:57+0300\n"
"Last-Translator: \n"
"Language-Team: \n"
"Language: ro\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Generated-By: pygettext.py 1.5\n"
"X-Generator: Poedit 2.2.3\n"
"Plural-Forms: nplurals=3; plural=(n==1 ? 0 : n==0 || (n!=1 && n%100>=1 && n"
"%100<=19) ? 1 : 2);\n"
"X-Poedit-Basepath: ../../..\n"
"X-Poedit-SearchPath-0: .\n"
"X-Poedit-SearchPathExcluded-0: build\n"
"X-Poedit-SearchPathExcluded-1: tests\n"
"X-Poedit-SearchPathExcluded-2: doc\n"

#: FlatCAMApp.py:405
msgid "FlatCAM is initializing ..."
msgstr "FlatCAM se inițializează ..."

#: FlatCAMApp.py:1231
msgid "Could not find the Language files. The App strings are missing."
msgstr "Nu am gasit fişierele cu traduceri. Mesajele aplicaţiei lipsesc."

#: FlatCAMApp.py:1618
msgid ""
"FlatCAM is initializing ...\n"
"Canvas initialization started."
msgstr ""
"FlatCAM se inițializează ...\n"
"Initializarea spațiului de afisare a inceput."

#: FlatCAMApp.py:1634
msgid ""
"FlatCAM is initializing ...\n"
"Canvas initialization started.\n"
"Canvas initialization finished in"
msgstr ""
"FlatCAM se inițializează ...\n"
"Initializarea spațiului de afisare a inceput.\n"
"Initializarea spatiului de afisare s-a terminat in"

#: FlatCAMApp.py:1841
msgid "Detachable Tabs"
msgstr "Taburi detașabile"

#: FlatCAMApp.py:2337
msgid ""
"Open Source Software - Type help to get started\n"
"\n"
msgstr ""
"Software open source - Introduceți help pentru a începe\n"
"\n"

#: FlatCAMApp.py:2548 FlatCAMApp.py:8382
msgid "New Project - Not saved"
msgstr "Proiect nou - Nu a fost salvat"

#: FlatCAMApp.py:2621 FlatCAMApp.py:8436 FlatCAMApp.py:8472 FlatCAMApp.py:8512
#: FlatCAMApp.py:9199 FlatCAMApp.py:10388 FlatCAMApp.py:10441
msgid ""
"Canvas initialization started.\n"
"Canvas initialization finished in"
msgstr ""
"FlatCAM se inițializează ...\n"
"Initializarea spațiului de afisare s-a terminat in"

#: FlatCAMApp.py:2623
msgid "Executing Tcl Script ..."
msgstr "Rulează Tcl Script..."

#: FlatCAMApp.py:2677 ObjectCollection.py:80 flatcamTools/ToolImage.py:218
#: flatcamTools/ToolPcbWizard.py:301 flatcamTools/ToolPcbWizard.py:324
msgid "Open cancelled."
msgstr "Deschidere anulată."

#: FlatCAMApp.py:2693
msgid "Open Config file failed."
msgstr "Deschiderea  fişierului de configurare a eşuat."

#: FlatCAMApp.py:2708
msgid "Open Script file failed."
msgstr "Deschiderea fişierului Script eşuat."

#: FlatCAMApp.py:2734
msgid "Open Excellon file failed."
msgstr "Deschiderea fişierului Excellon a eşuat."

#: FlatCAMApp.py:2748
msgid "Open GCode file failed."
msgstr "Deschiderea fişierului GCode a eşuat."

#: FlatCAMApp.py:2761
msgid "Open Gerber file failed."
msgstr "Deschiderea fişierului Gerber a eşuat."

#: FlatCAMApp.py:3034
msgid "Select a Geometry, Gerber or Excellon Object to edit."
msgstr "Selectează un obiect tip Geometrie Gerber sau Excellon pentru editare."

#: FlatCAMApp.py:3048
msgid ""
"Simultanoeus editing of tools geometry in a MultiGeo Geometry is not "
"possible.\n"
"Edit only one geometry at a time."
msgstr ""
"Editarea simultană de geometrii ale uneltelor dintr-un obiect tip Geometrie "
"MultiGeo nu este posibilă.\n"
"Se poate edita numai o singură geometrie de fiecare dată."

#: FlatCAMApp.py:3103
msgid "Editor is activated ..."
msgstr "Editorul este activ ..."

#: FlatCAMApp.py:3121
msgid "Do you want to save the edited object?"
msgstr "Vrei sa salvezi obiectul editat?"

#: FlatCAMApp.py:3122 flatcamGUI/FlatCAMGUI.py:1792
msgid "Close Editor"
msgstr "Inchide Editorul"

#: FlatCAMApp.py:3125 FlatCAMApp.py:4615 FlatCAMApp.py:7312 FlatCAMApp.py:8289
#: FlatCAMTranslation.py:97 FlatCAMTranslation.py:171
#: flatcamGUI/PreferencesUI.py:817
msgid "Yes"
msgstr "Da"

#: FlatCAMApp.py:3126 FlatCAMApp.py:4616 FlatCAMApp.py:7313 FlatCAMApp.py:8290
#: FlatCAMTranslation.py:98 FlatCAMTranslation.py:172
#: flatcamGUI/PreferencesUI.py:818 flatcamGUI/PreferencesUI.py:3376
#: flatcamGUI/PreferencesUI.py:3740 flatcamTools/ToolNonCopperClear.py:171
#: flatcamTools/ToolPaint.py:144
msgid "No"
msgstr "Nu"

#: FlatCAMApp.py:3127 FlatCAMApp.py:4617 FlatCAMApp.py:5486 FlatCAMApp.py:6743
#: FlatCAMApp.py:8291
msgid "Cancel"
msgstr "Anuleaza"

#: FlatCAMApp.py:3155
msgid "Object empty after edit."
msgstr "Obiectul nu are date dupa editare."

#: FlatCAMApp.py:3198 FlatCAMApp.py:3219 FlatCAMApp.py:3232
msgid "Select a Gerber, Geometry or Excellon Object to update."
msgstr ""
"Selectează un obiect tip Gerber, Geometrie sau Excellon pentru actualizare."

#: FlatCAMApp.py:3202
msgid "is updated, returning to App..."
msgstr "este actualizat, întoarcere la aplicaţie..."

#: FlatCAMApp.py:3597 FlatCAMApp.py:3651 FlatCAMApp.py:4475
msgid "Could not load defaults file."
msgstr "Nu am putut incărca fişierul cu valori default."

#: FlatCAMApp.py:3610 FlatCAMApp.py:3660 FlatCAMApp.py:4485
msgid "Failed to parse defaults file."
msgstr "Parsarea fişierului cu valori default a eșuat."

#: FlatCAMApp.py:3631 FlatCAMApp.py:3635
msgid "Import FlatCAM Preferences"
msgstr "Importă Preferințele FlatCAM"

#: FlatCAMApp.py:3642
msgid "FlatCAM preferences import cancelled."
msgstr "Importul preferințelor FlatCAM a eșuat."

#: FlatCAMApp.py:3665
msgid "Imported Defaults from"
msgstr "Valorile default au fost importate din"

#: FlatCAMApp.py:3685 FlatCAMApp.py:3690
msgid "Export FlatCAM Preferences"
msgstr "Exportă Preferințele FlatCAM"

#: FlatCAMApp.py:3698
msgid "FlatCAM preferences export cancelled."
msgstr "Exportul preferințelor FlatCAM este anulat."

#: FlatCAMApp.py:3707 FlatCAMApp.py:6503 FlatCAMApp.py:9380 FlatCAMApp.py:9491
#: FlatCAMApp.py:9616 FlatCAMApp.py:9675 FlatCAMApp.py:9793 FlatCAMApp.py:9932
#: FlatCAMObj.py:6104 flatcamTools/ToolSolderPaste.py:1428
msgid ""
"Permission denied, saving not possible.\n"
"Most likely another app is holding the file open and not accessible."
msgstr ""
"Permisiune refuzată, salvarea nu este posibilă.\n"
"Cel mai probabil o altă aplicație ține fișierul deschis și inaccesibil."

#: FlatCAMApp.py:3720
msgid "Could not load preferences file."
msgstr "Nu am putut incărca fişierul cu valori default."

#: FlatCAMApp.py:3740 FlatCAMApp.py:4532
msgid "Failed to write defaults to file."
msgstr "Salvarea valorilor default intr-un fişier a eșuat."

#: FlatCAMApp.py:3746
msgid "Exported preferences to"
msgstr "Exportă Preferințele in"

#: FlatCAMApp.py:3763
msgid "FlatCAM Preferences Folder opened."
msgstr "Folderul de preferințe FlatCAM a fost deschis."

#: FlatCAMApp.py:3846
msgid "Failed to open recent files file for writing."
msgstr ""
"Deschiderea fişierului cu >fişiere recente< pentru a fi salvat a eșuat."

#: FlatCAMApp.py:3857
msgid "Failed to open recent projects file for writing."
msgstr ""
"Deschiderea fişierului cu >proiecte recente< pentru a fi salvat a eșuat."

#: FlatCAMApp.py:3940 camlib.py:4904 flatcamTools/ToolSolderPaste.py:1214
msgid "An internal error has ocurred. See shell.\n"
msgstr ""
"A apărut o eroare internă. Verifică in TCL Shell pt mai multe detalii.\n"

#: FlatCAMApp.py:3941
#, python-brace-format
msgid ""
"Object ({kind}) failed because: {error} \n"
"\n"
msgstr ""
"Obiectul ({kind}) a eșuat din cauza: {error} \n"
"\n"

#: FlatCAMApp.py:3962
msgid "Converting units to "
msgstr "Se convertesc unitătile la "

#: FlatCAMApp.py:4058 FlatCAMApp.py:4061 FlatCAMApp.py:4064 FlatCAMApp.py:4067
#, python-brace-format
msgid ""
"[selected] {kind} created/selected: <span style=\"color:{color};\">{name}</"
"span>"
msgstr ""
"[selected]{kind} creat/selectat: <span style=\"color:{color};\">{name}</span>"

#: FlatCAMApp.py:4084 FlatCAMApp.py:6823 FlatCAMObj.py:236 FlatCAMObj.py:251
#: FlatCAMObj.py:267 FlatCAMObj.py:347 flatcamTools/ToolMove.py:206
msgid "Plotting"
msgstr "Se afișeaz"

#: FlatCAMApp.py:4178 flatcamGUI/FlatCAMGUI.py:415
msgid "About FlatCAM"
msgstr "Despre FlatCAM"

#: FlatCAMApp.py:4207
msgid "2D Computer-Aided Printed Circuit Board Manufacturing"
msgstr "Productie Cablaje Imprimate asistate 2D de PC"

#: FlatCAMApp.py:4208
msgid "Development"
msgstr "Dezvoltare"

#: FlatCAMApp.py:4209
msgid "DOWNLOAD"
msgstr "DOWNLOAD"

#: FlatCAMApp.py:4210
msgid "Issue tracker"
msgstr "Raportare probleme"

#: FlatCAMApp.py:4214
msgid "Close"
msgstr "Închide"

#: FlatCAMApp.py:4229
msgid ""
"(c) Copyright 2014 Juan Pablo Caram.\n"
"\n"
"Licensed under the MIT license:\n"
"http://www.opensource.org/licenses/mit-license.php\n"
"\n"
"Permission is hereby granted, free of charge, to any person obtaining a "
"copy\n"
"of this software and associated documentation files (the \"Software\"), to "
"deal\n"
"in the Software without restriction, including without limitation the "
"rights\n"
"to use, copy, modify, merge, publish, distribute, sublicense, and/or sell\n"
"copies of the Software, and to permit persons to whom the Software is\n"
" furnished to do so, subject to the following conditions:\n"
"\n"
"The above copyright notice and this permission notice shall be included in\n"
"all copies or substantial portions of the Software.\n"
"\n"
"THE SOFTWARE IS PROVIDED \"AS IS\", WITHOUT WARRANTY OF ANY KIND, EXPRESS "
"OR\n"
"IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,\n"
"FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE\n"
"AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER\n"
"LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING "
"FROM,\n"
"OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN\n"
"THE SOFTWARE."
msgstr ""
"(c) Copyright 2014 Juan Pablo Caram.\n"
"\n"
"Licențiat sub licența MIT:\n"
"http://www.opensource.org/licenses/mit-license.php\n"
"\n"
"Prin prezenta se acordă, gratuit, oricărei persoane care obține o copie\n"
"a acestui software și a fișierelor de documentație asociate („Software”), "
"pentru a utiliza\n"
"acest software fără restricții, inclusiv fără limitare a drepturilor\n"
"să folosească, să copieze, să modifice, să îmbine, să publice, să "
"distribuie, să licentieze mai departe și / sau să vândă\n"
"copii ale Software-ului și pentru a permite persoanelor cărora le este "
"oferit Software-ul\n"
"aceleasi drepturi, cu respectarea următoarelor condiții:\n"
"\n"
"Notificarea privind drepturile de autor de mai sus și această notificare de "
"permisiune sunt incluse în\n"
"toate copiile sau porțiuni substanțiale ale Software-ului.\n"
"\n"
"SOFTWARE-ul ESTE FURNIZAT „AșA CUM ESTE”, FĂRĂ GARANȚIE DE NICI-UN TIP, "
"EXPRIMATĂ SAU\n"
"IMPLICITĂ, INCLUZAND DAR FĂRĂ A FI LIMITAT LA GARANȚIILE DE "
"COMERCIABILITATE,\n"
"CONFORMITATE PENTRU UN SCOP PARTICULAR ȘI NONFRINGEMENT. SUB NICI-O FORMĂ, "
"NICIODĂ\n"
"AUTORII SAU DEȚINĂTORII DREPTULUI DE COPYRIGHT NU VOR FI TINUTI RASPUNZATORI "
"CU PRIVIRE LA\n"
"ORICE DAUNE, PRETENTII SAU ALTE RESPONSABILITATI, CAUZATE DE UN CONTRACT SAU "
"ORICE ALTA CAUZA,\n"
"CA URMARE A UTILIZARII PROGRAMULUI SAU ÎN CONEXIUNE CU PROGRAMUL, SAU "
"UTILIZAREA SA,\n"
"SAU ORICE TRATĂRI ÎN ACEST SOFTWARE."

#: FlatCAMApp.py:4276
msgid "Splash"
msgstr "Splash"

#: FlatCAMApp.py:4282
msgid "Programmers"
msgstr "Programatori"

#: FlatCAMApp.py:4288
msgid "Translators"
msgstr "Traducatori"

#: FlatCAMApp.py:4294
msgid "License"
msgstr "Licență"

#: FlatCAMApp.py:4315
msgid "Programmer"
msgstr "Programator"

#: FlatCAMApp.py:4316
msgid "Status"
msgstr "Statut"

#: FlatCAMApp.py:4318
msgid "Program Author"
msgstr "Autorul Programului"

#: FlatCAMApp.py:4322
msgid "Maintainer >=2019"
msgstr "Mentenanta >=2019"

#: FlatCAMApp.py:4377
msgid "Language"
msgstr "Limba"

#: FlatCAMApp.py:4378
msgid "Translator"
msgstr "Traducător"

#: FlatCAMApp.py:4379
msgid "E-mail"
msgstr "E-mail"

#: FlatCAMApp.py:4537 FlatCAMApp.py:7322
msgid "Preferences saved."
msgstr "Preferințele au fost salvate."

#: FlatCAMApp.py:4565
msgid "Could not load factory defaults file."
msgstr ""
"Fişierul cu valori default de fabrică nu a fost posibil să fie deschis."

#: FlatCAMApp.py:4575
msgid "Failed to parse factory defaults file."
msgstr "Parsarea fişierului cu valori default de fabrică  a eșuat."

#: FlatCAMApp.py:4590
msgid "Failed to write factory defaults to file."
msgstr ""
"Salvarea fişierului cu valori default de fabrică intr-un fişier a eșuat."

#: FlatCAMApp.py:4594
msgid "Factory defaults saved."
msgstr "Valori default de fabrică au fost salvate."

#: FlatCAMApp.py:4605 flatcamGUI/FlatCAMGUI.py:3467
msgid "Application is saving the project. Please wait ..."
msgstr "Aplicația salvează proiectul. Vă rugăm aşteptați ..."

#: FlatCAMApp.py:4610 FlatCAMTranslation.py:166
msgid ""
"There are files/objects modified in FlatCAM. \n"
"Do you want to Save the project?"
msgstr ""
"FlatCAM are fişiere/obiecte care au fost modificate. \n"
"Dorești să Salvezi proiectul?"

#: FlatCAMApp.py:4613 FlatCAMApp.py:8287 FlatCAMTranslation.py:169
msgid "Save changes"
msgstr "Salvează modificarile"

#: FlatCAMApp.py:4843
msgid "Selected Excellon file extensions registered with FlatCAM."
msgstr "Extensiile de fișiere Excellon selectate înregistrate cu FlatCAM."

#: FlatCAMApp.py:4865
msgid "Selected GCode file extensions registered with FlatCAM."
msgstr "Extensii de fișiere GCode selectate înregistrate cu FlatCAM."

#: FlatCAMApp.py:4887
msgid "Selected Gerber file extensions registered with FlatCAM."
msgstr "Extensii de fișiere Gerber selectate înregistrate cu FlatCAM."

#: FlatCAMApp.py:5053 FlatCAMApp.py:5109 FlatCAMApp.py:5137
msgid "At least two objects are required for join. Objects currently selected"
msgstr ""
"Cel puțin două obiecte sunt necesare pentru a fi unite. Obiectele selectate "
"în prezent"

#: FlatCAMApp.py:5062
msgid ""
"Failed join. The Geometry objects are of different types.\n"
"At least one is MultiGeo type and the other is SingleGeo type. A possibility "
"is to convert from one to another and retry joining \n"
"but in the case of converting from MultiGeo to SingleGeo, informations may "
"be lost and the result may not be what was expected. \n"
"Check the generated GCODE."
msgstr ""
"Fuziune eșuata. Obiectele Geometrii sunt de tipuri diferite.\n"
"Cel puțin unul este de tip Multigeo și celalalt este tip SinglGeo. O "
"posibilitate este să convertesti dintr-unul in celalalt și să reincerci "
"fuzionarea \n"
"dar un cazul conversiei de la MultiGeo to SingleGeo, se pot pierde "
"informatii și rezultatul ar putea să nu fie cel dorit. \n"
"Verifică codul G-Code generat."

#: FlatCAMApp.py:5104
msgid "Failed. Excellon joining works only on Excellon objects."
msgstr ""
"Eșuat. Fuzionarea Excellon functionează doar cu obiecte de tip Excellon."

#: FlatCAMApp.py:5132
msgid "Failed. Gerber joining works only on Gerber objects."
msgstr "Eșuat. Fuzionarea Gerber functionează doar cu obiecte de tip Gerber ."

#: FlatCAMApp.py:5162 FlatCAMApp.py:5199
msgid "Failed. Select a Geometry Object and try again."
msgstr "Eșuat. Selectează un obiect Geometrie și încearcă din nou."

#: FlatCAMApp.py:5167 FlatCAMApp.py:5204
msgid "Expected a FlatCAMGeometry, got"
msgstr "Se astepta o Geometrie FlatCAM, s-a primit"

#: FlatCAMApp.py:5181
msgid "A Geometry object was converted to MultiGeo type."
msgstr "Un obiect Geometrie a fost convertit la tipul MultiGeo."

#: FlatCAMApp.py:5219
msgid "A Geometry object was converted to SingleGeo type."
msgstr "Un obiect Geometrie a fost convertit la tipul SingleGeo ."

#: FlatCAMApp.py:5480
msgid "Toggle Units"
msgstr "Comută Unitati"

#: FlatCAMApp.py:5482
msgid "Change project units ..."
msgstr "Schimbă unitătile de măsură ..."

#: FlatCAMApp.py:5483
msgid ""
"Changing the units of the project causes all geometrical properties of all "
"objects to be scaled accordingly.\n"
"Continue?"
msgstr ""
"Schimbarea unitătilor de măsură din proiect va face ca toate proprietătile "
"geometrice ale obiectelor sa fie scalate corespunzător.\n"
"Continuati?"

#: FlatCAMApp.py:5485 FlatCAMApp.py:6637 FlatCAMApp.py:6742 FlatCAMApp.py:8596
#: FlatCAMApp.py:8610 FlatCAMApp.py:8865 FlatCAMApp.py:8876
msgid "Ok"
msgstr "Ok"

#: FlatCAMApp.py:5534
msgid "Converted units to"
msgstr "Unitătile au fost convertite in"

#: FlatCAMApp.py:5546
msgid " Units conversion cancelled."
msgstr " Conversia unitătilor este anulată."

#: FlatCAMApp.py:6449
msgid "Open file"
msgstr "Deschide fişierul"

#: FlatCAMApp.py:6480 FlatCAMApp.py:6485
msgid "Export G-Code ..."
msgstr "Exporta G-Code ..."

#: FlatCAMApp.py:6489
msgid "Export Code cancelled."
msgstr "Exportul Codului este anulat."

#: FlatCAMApp.py:6499 FlatCAMObj.py:6100 flatcamTools/ToolSolderPaste.py:1424
msgid "No such file or directory"
msgstr "Nu exista un aşa fişier sau director"

#: FlatCAMApp.py:6511 FlatCAMObj.py:6114
msgid "Saved to"
msgstr "Salvat in"

#: FlatCAMApp.py:6557
msgid "Code Editor content copied to clipboard ..."
msgstr "Conținut Editor de cod copiat în clipboard ..."

#: FlatCAMApp.py:6625 FlatCAMApp.py:6658 FlatCAMApp.py:6669 FlatCAMApp.py:6680
#: flatcamTools/ToolNonCopperClear.py:930 flatcamTools/ToolSolderPaste.py:774
msgid "Please enter a tool diameter with non-zero value, in Float format."
msgstr ""
"Introduceti un diametru al uneltei valid: valoare ne-nula in format Real."

#: FlatCAMApp.py:6630 FlatCAMApp.py:6663 FlatCAMApp.py:6674 FlatCAMApp.py:6685
msgid "Adding Tool cancelled"
msgstr "Adăugarea unei unelte anulată"

#: FlatCAMApp.py:6633
msgid ""
"Adding Tool works only when Advanced is checked.\n"
"Go to Preferences -> General - Show Advanced Options."
msgstr ""
"Adăugarea de unelte noi functionează doar in modul Avansat.\n"
"Pentru aceasta mergi in Preferințe -> General - Activează Modul Avansat."

#: FlatCAMApp.py:6737
msgid "Delete objects"
msgstr "Șterge obiectele"

#: FlatCAMApp.py:6740
msgid ""
"Are you sure you want to permanently delete\n"
"the selected objects?"
msgstr ""
"Sigur doriți să ștergeți definitiv\n"
"obiectele selectate?"

#: FlatCAMApp.py:6771
msgid "Object(s) deleted"
msgstr "Obiect(ele) șters(e)"

#: FlatCAMApp.py:6775
msgid "Failed. No object(s) selected..."
msgstr "Eșuat. Nici-un obiect nu este selectat."

#: FlatCAMApp.py:6777
msgid "Save the work in Editor and try again ..."
msgstr "Salvează continutul din Editor și încearcă din nou."

#: FlatCAMApp.py:6807
msgid "Object deleted"
msgstr "Obiectul este șters"

#: FlatCAMApp.py:6834
msgid "Click to set the origin ..."
msgstr "Click pentru a seta originea..."

#: FlatCAMApp.py:6856
msgid "Setting Origin..."
msgstr "Setează Originea..."

#: FlatCAMApp.py:6868
msgid "Origin set"
msgstr "Originea a fost setată"

#: FlatCAMApp.py:6875
msgid "Origin coordinates specified but incomplete."
msgstr "Coordonate pentru origine specificate, dar incomplete."

#: FlatCAMApp.py:6921
msgid "Jump to ..."
msgstr "Sari la ..."

#: FlatCAMApp.py:6922
msgid "Enter the coordinates in format X,Y:"
msgstr "Introduceți coordonatele in format X,Y:"

#: FlatCAMApp.py:6929
msgid "Wrong coordinates. Enter coordinates in format: X,Y"
msgstr "Coordonate gresite. Introduceți coordonatele in format X,Y"

#: FlatCAMApp.py:6961 flatcamEditors/FlatCAMExcEditor.py:3487
#: flatcamEditors/FlatCAMExcEditor.py:3495
#: flatcamEditors/FlatCAMGeoEditor.py:3846
#: flatcamEditors/FlatCAMGeoEditor.py:3861
#: flatcamEditors/FlatCAMGrbEditor.py:1067
#: flatcamEditors/FlatCAMGrbEditor.py:1171
#: flatcamEditors/FlatCAMGrbEditor.py:1445
#: flatcamEditors/FlatCAMGrbEditor.py:1703
#: flatcamEditors/FlatCAMGrbEditor.py:4255
#: flatcamEditors/FlatCAMGrbEditor.py:4270 flatcamGUI/FlatCAMGUI.py:2703
#: flatcamGUI/FlatCAMGUI.py:2715
msgid "Done."
msgstr "Executat."

#: FlatCAMApp.py:7095 FlatCAMApp.py:7163
msgid "No object is selected. Select an object and try again."
msgstr ""
"Nici-un obiect nu este selectat. Selectează un obiect și incearcă din nou."

#: FlatCAMApp.py:7183
msgid ""
"Aborting. The current task will be gracefully closed as soon as possible..."
msgstr "Intrerup. Taskul curent va fi închis cât mai curând posibil ..."

#: FlatCAMApp.py:7189
msgid "The current task was gracefully closed on user request..."
msgstr "Taskul curent a fost închis la cererea utilizatorului ..."

#: FlatCAMApp.py:7206 flatcamGUI/GUIElements.py:1443
msgid "Preferences"
msgstr "Preferințe"

#: FlatCAMApp.py:7273
msgid "Preferences edited but not saved."
msgstr "Preferințele au fost editate dar nu au fost salvate."

#: FlatCAMApp.py:7307
msgid ""
"One or more values are changed.\n"
"Do you want to save the Preferences?"
msgstr ""
"Una sau mai multe valori au fost schimbate.\n"
"Dorești să salvezi Preferințele?"

#: FlatCAMApp.py:7309 flatcamGUI/FlatCAMGUI.py:193
#: flatcamGUI/FlatCAMGUI.py:1002
msgid "Save Preferences"
msgstr "Salvează Pref"

#: FlatCAMApp.py:7338
msgid "No object selected to Flip on Y axis."
msgstr "Nu sete nici-un obiect selectat pentru oglindire pe axa Y."

#: FlatCAMApp.py:7364
msgid "Flip on Y axis done."
msgstr "Oglindire pe axa Y executată."

#: FlatCAMApp.py:7367 FlatCAMApp.py:7410
#: flatcamEditors/FlatCAMGrbEditor.py:5702
msgid "Flip action was not executed."
msgstr "Acțiunea de Oglindire nu a fost executată."

#: FlatCAMApp.py:7381
msgid "No object selected to Flip on X axis."
msgstr "Nu este nici-un obiect selectat pentru oglindire pe axa X."

#: FlatCAMApp.py:7407
msgid "Flip on X axis done."
msgstr "Oglindirea pe axa X executată."

#: FlatCAMApp.py:7424
msgid "No object selected to Rotate."
msgstr "Nici-un obiect selectat pentru Rotaţie."

#: FlatCAMApp.py:7427 FlatCAMApp.py:7475 FlatCAMApp.py:7508
msgid "Transform"
msgstr "Transformare"

#: FlatCAMApp.py:7427 FlatCAMApp.py:7475 FlatCAMApp.py:7508
msgid "Enter the Angle value:"
msgstr "Introduceți valoaea Unghiului:"

#: FlatCAMApp.py:7458
msgid "Rotation done."
msgstr "Rotaţie executată."

#: FlatCAMApp.py:7461
msgid "Rotation movement was not executed."
msgstr "Mișcarea de rotație nu a fost executată."

#: FlatCAMApp.py:7473
msgid "No object selected to Skew/Shear on X axis."
msgstr "Nici-un obiect nu este selectat pentru Deformare pe axa X."

#: FlatCAMApp.py:7495
msgid "Skew on X axis done."
msgstr "Deformare pe axa X terminată."

#: FlatCAMApp.py:7506
msgid "No object selected to Skew/Shear on Y axis."
msgstr "Nici-un obiect nu este selectat pentru Deformare pe axa Y."

#: FlatCAMApp.py:7528
msgid "Skew on Y axis done."
msgstr "Deformare pe axa Y terminată."

#: FlatCAMApp.py:7583 flatcamGUI/FlatCAMGUI.py:1320
msgid "Grid On/Off"
msgstr "Grid On/Off"

#: FlatCAMApp.py:7596 flatcamEditors/FlatCAMGeoEditor.py:942
#: flatcamEditors/FlatCAMGrbEditor.py:2477
#: flatcamEditors/FlatCAMGrbEditor.py:5212 flatcamGUI/ObjectUI.py:1058
#: flatcamTools/ToolDblSided.py:160 flatcamTools/ToolDblSided.py:207
#: flatcamTools/ToolNonCopperClear.py:237 flatcamTools/ToolPaint.py:176
#: flatcamTools/ToolSolderPaste.py:115 flatcamTools/ToolSolderPaste.py:483
#: flatcamTools/ToolTransform.py:338
msgid "Add"
msgstr "Adaugă"

#: FlatCAMApp.py:7597 FlatCAMObj.py:3628
#: flatcamEditors/FlatCAMGrbEditor.py:2482 flatcamGUI/FlatCAMGUI.py:553
#: flatcamGUI/FlatCAMGUI.py:761 flatcamGUI/FlatCAMGUI.py:1695
#: flatcamGUI/FlatCAMGUI.py:1790 flatcamGUI/FlatCAMGUI.py:2202
#: flatcamGUI/ObjectUI.py:1074 flatcamTools/ToolNonCopperClear.py:249
#: flatcamTools/ToolPaint.py:188 flatcamTools/ToolSolderPaste.py:121
#: flatcamTools/ToolSolderPaste.py:485
msgid "Delete"
msgstr "Șterge"

#: FlatCAMApp.py:7610
msgid "New Grid ..."
msgstr "Grid nou ..."

#: FlatCAMApp.py:7611
msgid "Enter a Grid Value:"
msgstr "Introduceti of valoare pt Grid:"

#: FlatCAMApp.py:7619 FlatCAMApp.py:7646
msgid "Please enter a grid value with non-zero value, in Float format."
msgstr "Introduceți o valoare pentru Grila ne-nula și in format Real."

#: FlatCAMApp.py:7625
msgid "New Grid added"
msgstr "Grid nou"

#: FlatCAMApp.py:7628
msgid "Grid already exists"
msgstr "Grila există deja"

#: FlatCAMApp.py:7631
msgid "Adding New Grid cancelled"
msgstr "Adăugarea unei valori de Grilă a fost anulată"

#: FlatCAMApp.py:7653
msgid " Grid Value does not exist"
msgstr " Valoarea Grilei nu există"

#: FlatCAMApp.py:7656
msgid "Grid Value deleted"
msgstr "Valoarea Grila a fost stearsă"

#: FlatCAMApp.py:7659
msgid "Delete Grid value cancelled"
msgstr "Ștergerea unei valori de Grilă a fost anulată"

#: FlatCAMApp.py:7665
msgid "Key Shortcut List"
msgstr "Lista de shortcut-uri"

#: FlatCAMApp.py:7699
msgid " No object selected to copy it's name"
msgstr " Nici-un obiect nu este selectat pentru i se copia valoarea"

#: FlatCAMApp.py:7703
msgid "Name copied on clipboard ..."
msgstr "Numele a fost copiat pe Clipboard ..."

#: FlatCAMApp.py:7758 flatcamEditors/FlatCAMGrbEditor.py:4187
msgid "Coordinates copied to clipboard."
msgstr "Coordonatele au fost copiate in clipboard."

#: FlatCAMApp.py:8043 FlatCAMApp.py:8047 FlatCAMApp.py:8051 FlatCAMApp.py:8055
#: FlatCAMApp.py:8071 FlatCAMApp.py:8075 FlatCAMApp.py:8079 FlatCAMApp.py:8083
#: FlatCAMApp.py:8123 FlatCAMApp.py:8126 FlatCAMApp.py:8129 FlatCAMApp.py:8132
#: ObjectCollection.py:728 ObjectCollection.py:731 ObjectCollection.py:734
#: ObjectCollection.py:737
#, python-brace-format
msgid "[selected]<span style=\"color:{color};\">{name}</span> selected"
msgstr "[selected]<span style=\"color:{color};\">{name}</span> selectat"

#: FlatCAMApp.py:8284
msgid ""
"There are files/objects opened in FlatCAM.\n"
"Creating a New project will delete them.\n"
"Do you want to Save the project?"
msgstr ""
"Exista fişiere/obiecte deschide in FlatCAM.\n"
"Crearea unui nou Proiect le va șterge..\n"
"Doriti să Salvati proiectul curentt?"

#: FlatCAMApp.py:8306
msgid "New Project created"
msgstr "Un nou Proiect a fost creat"

#: FlatCAMApp.py:8427 FlatCAMApp.py:8431 flatcamGUI/FlatCAMGUI.py:636
#: flatcamGUI/FlatCAMGUI.py:2075
msgid "Open Gerber"
msgstr "Încarcă Gerber"

#: FlatCAMApp.py:8438
msgid "Opening Gerber file."
msgstr "Se incarcă un fişier Gerber."

#: FlatCAMApp.py:8444
msgid "Open Gerber cancelled."
msgstr "Incărcarea unui fişier Gerber este anulată."

#: FlatCAMApp.py:8464 FlatCAMApp.py:8468 flatcamGUI/FlatCAMGUI.py:637
#: flatcamGUI/FlatCAMGUI.py:2076
msgid "Open Excellon"
msgstr "Încarcă Excellon"

#: FlatCAMApp.py:8474
msgid "Opening Excellon file."
msgstr "Se incarcă un fişier Excellon."

#: FlatCAMApp.py:8480
msgid " Open Excellon cancelled."
msgstr " Incărcarea unui fişier Excellon este anulată."

#: FlatCAMApp.py:8503 FlatCAMApp.py:8507
msgid "Open G-Code"
msgstr "Încarcă G-Code"

#: FlatCAMApp.py:8514
msgid "Opening G-Code file."
msgstr "Se incarcă un fişier G-Code."

#: FlatCAMApp.py:8520
msgid "Open G-Code cancelled."
msgstr "Incărcarea unui fişier G-Code este anulată."

#: FlatCAMApp.py:8537 FlatCAMApp.py:8540 flatcamGUI/FlatCAMGUI.py:1326
msgid "Open Project"
msgstr "Încarcă Project"

#: FlatCAMApp.py:8549
msgid "Open Project cancelled."
msgstr "Incărcarea unui fişier Proiect FlatCAM este anulată."

#: FlatCAMApp.py:8568 FlatCAMApp.py:8571
msgid "Open Configuration File"
msgstr "Încarcă un fişier de Configurare"

#: FlatCAMApp.py:8576
msgid "Open Config cancelled."
msgstr "Incărcarea unui fişier configurare FlatCAM este anulată."

#: FlatCAMApp.py:8592 FlatCAMApp.py:8861 FlatCAMApp.py:11505
#: FlatCAMApp.py:11526 FlatCAMApp.py:11548 FlatCAMApp.py:11571
msgid "No object selected."
msgstr "Nici-un obiect nu este selectat."

#: FlatCAMApp.py:8593 FlatCAMApp.py:8862
msgid "Please Select a Geometry object to export"
msgstr "Selectează un obiect Geometrie pentru export"

#: FlatCAMApp.py:8607
msgid "Only Geometry, Gerber and CNCJob objects can be used."
msgstr "Doar obiectele Geometrie, Gerber și CNCJob pot fi folosite."

#: FlatCAMApp.py:8620 FlatCAMApp.py:8624
msgid "Export SVG"
msgstr "Exporta SVG"

#: FlatCAMApp.py:8630
msgid " Export SVG cancelled."
msgstr " Exportul fisierului SVG a fost anulat."

#: FlatCAMApp.py:8650
msgid "Data must be a 3D array with last dimension 3 or 4"
msgstr ""
"Datele trebuie să fie organizate intr-o arie 3D cu ultima dimensiune cu "
"valoarea 3 sau 4"

#: FlatCAMApp.py:8656 FlatCAMApp.py:8660
msgid "Export PNG Image"
msgstr "Exporta imagine PNG"

#: FlatCAMApp.py:8665
msgid "Export PNG cancelled."
msgstr "Exportul imagine PNG este anulat."

#: FlatCAMApp.py:8685
msgid "No object selected. Please select an Gerber object to export."
msgstr "Nici-un obiect selectat. Selectează un obiect Gerber pentru export."

#: FlatCAMApp.py:8691 FlatCAMApp.py:8823
msgid "Failed. Only Gerber objects can be saved as Gerber files..."
msgstr "Eșuat. Doar obiectele tip Gerber pot fi salvate ca fişiere Gerber..."

#: FlatCAMApp.py:8703
msgid "Save Gerber source file"
msgstr "Salvează codul sursa Gerber ca fişier"

#: FlatCAMApp.py:8709
msgid "Save Gerber source file cancelled."
msgstr "Salvarea codului sursa Gerber este anulată."

#: FlatCAMApp.py:8729
msgid "No object selected. Please select an Excellon object to export."
msgstr "Nici-un obiect selectat. Selectează un obiect Excellon pentru export."

#: FlatCAMApp.py:8735 FlatCAMApp.py:8779
msgid "Failed. Only Excellon objects can be saved as Excellon files..."
msgstr ""
"Eșuat. Doar obiectele tip Excellon pot fi salvate ca fişiere Excellon ..."

#: FlatCAMApp.py:8743 FlatCAMApp.py:8747
msgid "Save Excellon source file"
msgstr "Salvează codul sursa Excellon ca fişier"

#: FlatCAMApp.py:8753
msgid "Saving Excellon source file cancelled."
msgstr "Salvarea codului sursa Excellon este anulată."

#: FlatCAMApp.py:8773
msgid "No object selected. Please Select an Excellon object to export."
msgstr "Nici-un obiect selectat. Selectează un obiect Excellon pentru export."

#: FlatCAMApp.py:8787 FlatCAMApp.py:8791
msgid "Export Excellon"
msgstr "Exportă Excellon"

#: FlatCAMApp.py:8797
msgid "Export Excellon cancelled."
msgstr "Exportul fișierului Excellon a fost anulat."

#: FlatCAMApp.py:8817
msgid "No object selected. Please Select an Gerber object to export."
msgstr "Nici-un obiect selectat. Selectează un obiect Gerber pentru export."

#: FlatCAMApp.py:8831 FlatCAMApp.py:8835
msgid "Export Gerber"
msgstr "Exportă Gerber"

#: FlatCAMApp.py:8841
msgid "Export Gerber cancelled."
msgstr "Exportul fișierului Gerber a fost anulat."

#: FlatCAMApp.py:8873
msgid "Only Geometry objects can be used."
msgstr "Doar obiecte tip Geometrie pot fi folosite."

#: FlatCAMApp.py:8887 FlatCAMApp.py:8891
msgid "Export DXF"
msgstr "Exportă DXF"

#: FlatCAMApp.py:8898
msgid "Export DXF cancelled."
msgstr "Exportul fișierului DXF a fost anulat."

#: FlatCAMApp.py:8918 FlatCAMApp.py:8921
msgid "Import SVG"
msgstr "Importă SVG"

#: FlatCAMApp.py:8931
msgid "Open SVG cancelled."
msgstr "Incărcarea fișierului SVG a fost anulată."

#: FlatCAMApp.py:8950 FlatCAMApp.py:8954
msgid "Import DXF"
msgstr "Importa DXF"

#: FlatCAMApp.py:8964
msgid "Open DXF cancelled."
msgstr "Incărcarea fișierului DXF a fost anulată."

#: FlatCAMApp.py:9011
msgid "Viewing the source code of the selected object."
msgstr "Vizualizarea codului sursă a obiectului selectat."

#: FlatCAMApp.py:9012
msgid "Loading..."
msgstr "Se incarcă..."

#: FlatCAMApp.py:9019
msgid "Select an Gerber or Excellon file to view it's source file."
msgstr "Selectati un obiect Gerber sau Excellon pentru a-i vedea codul sursa."

#: FlatCAMApp.py:9031
msgid "Source Editor"
msgstr "Editor Cod Sursă"

#: FlatCAMApp.py:9046 FlatCAMApp.py:9053
msgid "There is no selected object for which to see it's source file code."
msgstr "Nici-un obiect selectat pentru a-i vedea codul sursa."

#: FlatCAMApp.py:9065
msgid "Failed to load the source code for the selected object"
msgstr "Codul sursă pentru obiectul selectat nu a putut fi încărcat"

#: FlatCAMApp.py:9079 FlatCAMApp.py:10394 FlatCAMObj.py:5880
#: flatcamTools/ToolSolderPaste.py:1304
msgid "Code Editor"
msgstr "Editor Cod"

#: FlatCAMApp.py:9097
msgid "New TCL script file created in Code Editor."
msgstr "Un nou script TCL a fost creat in Editorul de cod."

#: FlatCAMApp.py:9100
msgid "Script Editor"
msgstr "Editor Script"

#: FlatCAMApp.py:9103
msgid ""
"#\n"
"# CREATE A NEW FLATCAM TCL SCRIPT\n"
"# TCL Tutorial here: https://www.tcl.tk/man/tcl8.5/tutorial/tcltutorial."
"html\n"
"#\n"
"\n"
"# FlatCAM commands list:\n"
"# AddCircle, AddPolygon, AddPolyline, AddRectangle, AlignDrill, "
"AlignDrillGrid, ClearShell, ClearCopper,\n"
"# Cncjob, Cutout, Delete, Drillcncjob, ExportGcode, ExportSVG, Exteriors, "
"GeoCutout, GeoUnion, GetNames,\n"
"# GetSys, ImportSvg, Interiors, Isolate, Follow, JoinExcellon, JoinGeometry, "
"ListSys, MillDrills,\n"
"# MillSlots, Mirror, New, NewGeometry, Offset, OpenExcellon, OpenGCode, "
"OpenGerber, OpenProject,\n"
"# Options, Paint, Panelize, Plot, SaveProject, SaveSys, Scale, SetActive, "
"SetSys, Skew, SubtractPoly,\n"
"# SubtractRectangle, Version, WriteGCode\n"
"#\n"
"\n"
msgstr ""
"#\n"
"# CREEAZA UN SCRIPT TCL NOU FLATCAM\n"
"# TCL Tutorial aici: https://www.tcl.tk/man/tcl8.5/tutorial/tcltutorial."
"html\n"
"#\n"
"\n"
"# Lista de comenzi FlatCAM:\n"
"# AddCircle, AddPolygon, AddPolyline, AddRectangle, AlignDrill, "
"AlignDrillGrid, ClearShell, ClearCopper,\n"
"# Cncjob, Cutout, Delete, Drillcncjob, ExportGcode, ExportSVG, Exteriors, "
"GeoCutout, GeoUnion, GetNames,\n"
"# GetSys, ImportSvg, Interiors, Isolate, Follow, JoinExcellon, JoinGeometry, "
"ListSys, MillDrills,\n"
"# MillSlots, Mirror, New, NewGeometry, Offset, OpenExcellon, OpenGCode, "
"OpenGerber, OpenProject,\n"
"# Options, Paint, Panelize, Plot, SaveProject, SaveSys, Scale, SetActive, "
"SetSys, Skew, SubtractPoly,\n"
"# SubtractRectangle, Version, WriteGCode\n"
"#\n"
"\n"

#: FlatCAMApp.py:9142 FlatCAMApp.py:9145
msgid "Open TCL script"
msgstr "Încarcă TCL script"

#: FlatCAMApp.py:9155
msgid "Open TCL script cancelled."
msgstr "Incărcarea fisierului TCL script anulată."

#: FlatCAMApp.py:9177
msgid "TCL script file opened in Code Editor."
msgstr "S-a încărcat un script TCL în Editorul Cod"

#: FlatCAMApp.py:9201
msgid "Executing FlatCAMScript file."
msgstr "Se executa un fisier script FlatCAM."

#: FlatCAMApp.py:9208 FlatCAMApp.py:9211
msgid "Run TCL script"
msgstr "Ruleaza TCL script"

#: FlatCAMApp.py:9221
msgid "Run TCL script cancelled."
msgstr "Executarea fisierului Script a fost anulată."

#: FlatCAMApp.py:9237
msgid "TCL script file opened in Code Editor and executed."
msgstr "Un fisier script TCL a fost deschis in Editorul de cod si executat."

#: FlatCAMApp.py:9288 FlatCAMApp.py:9292
msgid "Save Project As ..."
msgstr "Salvează Proiectul ca ..."

#: FlatCAMApp.py:9289
#, python-brace-format
msgid "{l_save}/Project_{date}"
msgstr "{l_save}/Proiect_{date}"

#: FlatCAMApp.py:9298
msgid "Save Project cancelled."
msgstr "Salvarea Proiect anulată."

#: FlatCAMApp.py:9346
msgid "Exporting SVG"
msgstr "SVG in curs de export"

#: FlatCAMApp.py:9388 FlatCAMApp.py:9499 FlatCAMApp.py:9625
msgid "SVG file exported to"
msgstr "Fişier SVG exportat in"

#: FlatCAMApp.py:9423 FlatCAMApp.py:9548 flatcamTools/ToolPanelize.py:381
msgid "No object Box. Using instead"
msgstr "Nu exista container. Se foloseşte in schimb"

#: FlatCAMApp.py:9502 FlatCAMApp.py:9628
msgid "Generating Film ... Please wait."
msgstr "Filmul se generează ... Aşteaptă."

#: FlatCAMApp.py:9801
msgid "Excellon file exported to"
msgstr "Fişierul Excellon exportat in"

#: FlatCAMApp.py:9810
msgid "Exporting Excellon"
msgstr "Excellon in curs de export"

#: FlatCAMApp.py:9816 FlatCAMApp.py:9824
msgid "Could not export Excellon file."
msgstr "Fişierul Excellon nu a fost posibil să fie exportat."

#: FlatCAMApp.py:9940
msgid "Gerber file exported to"
msgstr "Fişier Gerber exportat in"

#: FlatCAMApp.py:9948
msgid "Exporting Gerber"
msgstr "Gerber in curs de export"

#: FlatCAMApp.py:9954 FlatCAMApp.py:9962
msgid "Could not export Gerber file."
msgstr "Fişierul Gerber nu a fost posibil să fie exportat."

#: FlatCAMApp.py:10007
msgid "DXF file exported to"
msgstr "Fişierul DXF exportat in"

#: FlatCAMApp.py:10013
msgid "Exporting DXF"
msgstr "DXF in curs de export"

#: FlatCAMApp.py:10019 FlatCAMApp.py:10027
msgid "Could not export DXF file."
msgstr "Fişierul DXF nu a fost posibil să fie exportat."

#: FlatCAMApp.py:10048 FlatCAMApp.py:10092 FlatCAMApp.py:10138
msgid ""
"Not supported type is picked as parameter. Only Geometry and Gerber are "
"supported"
msgstr ""
"Tipul parametrului nu este compatibil. Doar obiectele tip Geometrie si "
"Gerber sunt acceptate"

#: FlatCAMApp.py:10058
msgid "Importing SVG"
msgstr "SVG in curs de ia fi importat"

#: FlatCAMApp.py:10070 FlatCAMApp.py:10114 FlatCAMApp.py:10159
#: FlatCAMApp.py:10240 FlatCAMApp.py:10307 FlatCAMApp.py:10374
#: flatcamTools/ToolPDF.py:220
msgid "Opened"
msgstr "Încarcat"

#: FlatCAMApp.py:10102
msgid "Importing DXF"
msgstr "DXF in curs de a fi importat"

#: FlatCAMApp.py:10146
msgid "Importing Image"
msgstr "Imaginea in curs de a fi importata"

#: FlatCAMApp.py:10189
msgid "Failed to open file"
msgstr "Eşec in incărcarea fişierului"

#: FlatCAMApp.py:10194
msgid "Failed to parse file"
msgstr "Parsarea fişierului a eșuat"

#: FlatCAMApp.py:10201 FlatCAMApp.py:10275 FlatCAMObj.py:4589
#: flatcamEditors/FlatCAMGrbEditor.py:3999 flatcamTools/ToolPcbWizard.py:437
msgid "An internal error has occurred. See shell.\n"
msgstr ""
"A apărut o eroare internă. Verifică in TCL Shell pt mai multe detalii.\n"

#: FlatCAMApp.py:10211
msgid "Object is not Gerber file or empty. Aborting object creation."
msgstr ""
"Obiectul nu estetip Gerber sau este gol. Se anulează crearea obiectului."

#: FlatCAMApp.py:10219
msgid "Opening Gerber"
msgstr "Gerber in curs de incărcare"

#: FlatCAMApp.py:10230
msgid " Open Gerber failed. Probable not a Gerber file."
msgstr " Incărcarea Gerber a eșuat. Probabil nu este de tip Gerber."

#: FlatCAMApp.py:10265 flatcamTools/ToolPcbWizard.py:427
msgid "This is not Excellon file."
msgstr "Acesta nu este un fişier Excellon."

#: FlatCAMApp.py:10269
msgid "Cannot open file"
msgstr "Nu se poate incărca fişierul"

#: FlatCAMApp.py:10289 flatcamTools/ToolPDF.py:270
#: flatcamTools/ToolPcbWizard.py:451
msgid "No geometry found in file"
msgstr "Nici-o informaţie de tip geometrie nu s-a gasit in fişierul"

#: FlatCAMApp.py:10292
msgid "Opening Excellon."
msgstr "Excellon in curs de incărcare."

#: FlatCAMApp.py:10299
msgid "Open Excellon file failed. Probable not an Excellon file."
msgstr "Incărcarea Excellon a eșuat. Probabil nu este de tip Excellon."

#: FlatCAMApp.py:10338
msgid "Failed to open"
msgstr "A eșuat incărcarea fişierului"

#: FlatCAMApp.py:10349
msgid "This is not GCODE"
msgstr "Acest obiect nu este de tip GCode"

#: FlatCAMApp.py:10355
msgid "Opening G-Code."
msgstr "G-Code in curs de incărcare."

#: FlatCAMApp.py:10364
msgid ""
"Failed to create CNCJob Object. Probable not a GCode file.\n"
" Attempting to create a FlatCAM CNCJob Object from G-Code file failed during "
"processing"
msgstr ""
"Eşec in crearea unui obiect CNCJob. Probabil nu este un fişier GCode.\n"
"Incercarea de a crea un obiect CNCJob din G-Code a eșuat in timpul procesarii"

#: FlatCAMApp.py:10390
msgid "Opening FlatCAM Config file."
msgstr "Se incarca un fişier FlatCAM de configurare."

#: FlatCAMApp.py:10412
msgid "Failed to open config file"
msgstr "Eşec in incărcarea fişierului de configurare"

#: FlatCAMApp.py:10438
msgid "Loading Project ... Please Wait ..."
msgstr "Se încarcă proiectul ... Vă rugăm să așteptați ..."

#: FlatCAMApp.py:10443
msgid "Opening FlatCAM Project file."
msgstr "Se incarca un fisier proiect FlatCAM."

#: FlatCAMApp.py:10453 FlatCAMApp.py:10471
msgid "Failed to open project file"
msgstr "Eşec in incărcarea fişierului proiect"

#: FlatCAMApp.py:10505
msgid "Loading Project ... restoring"
msgstr "Se încarcă proiectul ... se restabileste"

#: FlatCAMApp.py:10514
msgid "Project loaded from"
msgstr "Proiectul a fost incărcat din"

#: FlatCAMApp.py:10577
msgid "Redrawing all objects"
msgstr "Toate obiectele sunt reafisate."

#: FlatCAMApp.py:10609
msgid "Available commands:\n"
msgstr "Comenzi disponibile:\n"

#: FlatCAMApp.py:10611
msgid ""
"\n"
"\n"
"Type help <command_name> for usage.\n"
" Example: help open_gerber"
msgstr ""
"\n"
"\n"
"Introduceți help <nume_comanda> pentru utilizare.\n"
"Exemplu: help open_gerber"

#: FlatCAMApp.py:10761
msgid "Shows list of commands."
msgstr "Arata o lista de comenzi."

#: FlatCAMApp.py:10819
msgid "Failed to load recent item list."
msgstr "Eşec in incărcarea listei cu fişiere recente."

#: FlatCAMApp.py:10827
msgid "Failed to parse recent item list."
msgstr "Eşec in parsarea listei cu fişiere recente."

#: FlatCAMApp.py:10838
msgid "Failed to load recent projects item list."
msgstr "Eşec in incărcarea listei cu proiecte recente."

#: FlatCAMApp.py:10846
msgid "Failed to parse recent project item list."
msgstr "Eşec in parsarea listei cu proiecte recente."

#: FlatCAMApp.py:10905 FlatCAMApp.py:10928
msgid "Clear Recent files"
msgstr "Sterge fişierele recente"

#: FlatCAMApp.py:10945 flatcamGUI/FlatCAMGUI.py:1019
msgid "<b>Shortcut Key List</b>"
msgstr "<b>Lista cu taste Shortcut</b>"

#: FlatCAMApp.py:11019
msgid "Selected Tab - Choose an Item from Project Tab"
msgstr "Tab-ul Selectat - Alege un obiect din Tab-ul Proiect"

#: FlatCAMApp.py:11020
msgid "Details"
msgstr "Detalii"

#: FlatCAMApp.py:11022
msgid "The normal flow when working in FlatCAM is the following:"
msgstr "Fluxul normal cand se lucreaza in FlatCAM este urmatorul\""

#: FlatCAMApp.py:11023
msgid ""
"Load/Import a Gerber, Excellon, Gcode, DXF, Raster Image or SVG file into "
"FlatCAM using either the toolbars, key shortcuts or even dragging and "
"dropping the files on the GUI."
msgstr ""
"Încărcați / importați un fișier Gerber, Excellon, Gcode, DXF, Raster Image "
"sau SVG în FlatCAM utilizând fie barele de instrumente, combinatii de taste "
"sau chiar tragând fișierele în GUI."

#: FlatCAMApp.py:11026
msgid ""
"You can also load a FlatCAM project by double clicking on the project file, "
"drag and drop of the file into the FLATCAM GUI or through the menu (or "
"toolbar) actions offered within the app."
msgstr ""
"De asemenea, puteți încărca un proiect FlatCAM făcând dublu clic pe fișierul "
"proiectului, tragând fișierul în fereastra FLATCAM sau prin icon-urile din "
"meniu (sau din bara de instrumente) oferite în aplicație."

#: FlatCAMApp.py:11029
msgid ""
"Once an object is available in the Project Tab, by selecting it and then "
"focusing on SELECTED TAB (more simpler is to double click the object name in "
"the Project Tab, SELECTED TAB will be updated with the object properties "
"according to its kind: Gerber, Excellon, Geometry or CNCJob object."
msgstr ""
"Odată ce un obiect este disponibil în fila Proiect, selectându-l și apoi "
"concentrându-vă pe fila SELECTAT (mai simplu este să faceți dublu clic pe "
"numele obiectului din fila Proiect, fila SELECTAT va fi actualizată cu "
"proprietățile obiectului în funcție de tipul său: Gerber, Excellon, "
"Geometrie sau obiect CNCJob."

#: FlatCAMApp.py:11033
msgid ""
"If the selection of the object is done on the canvas by single click "
"instead, and the SELECTED TAB is in focus, again the object properties will "
"be displayed into the Selected Tab. Alternatively, double clicking on the "
"object on the canvas will bring the SELECTED TAB and populate it even if it "
"was out of focus."
msgstr ""
"Dacă în schimb selecția obiectului se face pe un singur clic, iar fila "
"SELECTAT este în centrul atenției, din nou proprietățile obiectului vor fi "
"afișate în fila SELECTAT. În mod alternativ, facand dublu clic pe obiectul "
"de pe ecran va aduce fila SELECTAT și o va popula chiar dacă nu a fost in "
"focus."

#: FlatCAMApp.py:11037
msgid ""
"You can change the parameters in this screen and the flow direction is like "
"this:"
msgstr ""
"Se pot schimba parametrii in acest ecran si directia de executive este asa:"

#: FlatCAMApp.py:11038
msgid ""
"Gerber/Excellon Object --> Change Parameter --> Generate Geometry --> "
"Geometry Object --> Add tools (change param in Selected Tab) --> Generate "
"CNCJob --> CNCJob Object --> Verify GCode (through Edit CNC Code) and/or "
"append/prepend to GCode (again, done in SELECTED TAB) --> Save GCode."
msgstr ""
"Obiect Gerber / Excellon -> Modificare parametru -> Generare geometrie -> "
"Obiect Geometrie -> Adăugare unelte (modifica parametru în fila SELECTAT) -> "
"Generare CNCJob -> Obiect CNCJob -> Verificare G-code (prin Editați codul "
"CNC) și / sau adăugați in fata / la final codul G-code (din nou, efectuat în "
"fila SELECȚIONATĂ) -> Salvați codul G-code."

#: FlatCAMApp.py:11042
msgid ""
"A list of key shortcuts is available through an menu entry in Help --> "
"Shortcuts List or through its own key shortcut: <b>F3</b>."
msgstr ""
"O listă de comenzi rapide de chei este disponibilă printr-o optiune din "
"meniul Ajutor -> Lista de combinatii taste sau prin propria tasta asociata: "
"<b>F3</b>."

#: FlatCAMApp.py:11103
msgid "Failed checking for latest version. Could not connect."
msgstr ""
"Verificarea pentru ultima versiune a eșuat. Nu a fost posibilă conectarea la "
"server."

#: FlatCAMApp.py:11111
msgid "Could not parse information about latest version."
msgstr "Informatia cu privire la ultima versiune nu s-a putut interpreta."

#: FlatCAMApp.py:11122
msgid "FlatCAM is up to date!"
msgstr "FlatCAM este la ultima versiune!"

#: FlatCAMApp.py:11127
msgid "Newer Version Available"
msgstr "O nouă versiune este disponibila"

#: FlatCAMApp.py:11128
msgid ""
"There is a newer version of FlatCAM available for download:\n"
"\n"
msgstr ""
"O nouă versiune de FlatCAM este disponibilă pentru download::\n"
"\n"

#: FlatCAMApp.py:11130
msgid "info"
msgstr "informaţie"

#: FlatCAMApp.py:11206
msgid "All plots disabled."
msgstr "Toate afişările sunt dezactivate."

#: FlatCAMApp.py:11213
msgid "All non selected plots disabled."
msgstr "Toate afişările care nu sunt selectate sunt dezactivate."

#: FlatCAMApp.py:11220
msgid "All plots enabled."
msgstr "Toate afişările sunt activate."

#: FlatCAMApp.py:11227
msgid "Selected plots enabled..."
msgstr "Toate afişările selectate sunt activate..."

#: FlatCAMApp.py:11236
msgid "Selected plots disabled..."
msgstr "Toate afişările selectate sunt dezactivate..."

#: FlatCAMApp.py:11254
msgid "Enabling plots ..."
msgstr "Activează Afișare ..."

#: FlatCAMApp.py:11293
msgid "Disabling plots ..."
msgstr "Dezactivează Afișare ..."

#: FlatCAMApp.py:11315
msgid "Working ..."
msgstr "Se lucrează..."

#: FlatCAMApp.py:11354
msgid "Saving FlatCAM Project"
msgstr "Proiectul FlatCAM este in curs de salvare"

#: FlatCAMApp.py:11376 FlatCAMApp.py:11414
msgid "Project saved to"
msgstr "Proiectul s-a salvat in"

#: FlatCAMApp.py:11396
msgid "Failed to verify project file"
msgstr "Eşec in incărcarea fişierului proiect"

#: FlatCAMApp.py:11396 FlatCAMApp.py:11405 FlatCAMApp.py:11417
msgid "Retry to save it."
msgstr "Încercați din nou pentru a-l salva."

#: FlatCAMApp.py:11405 FlatCAMApp.py:11417
msgid "Failed to parse saved project file"
msgstr "Esec in analizarea fişierului Proiect"

#: FlatCAMApp.py:11628
msgid "The user requested a graceful exit of the current task."
msgstr "Utilizatorul a solicitat o inchidere grațioasă a taskului curent."

#: FlatCAMObj.py:222
msgid "Name changed from"
msgstr "Nume schimbat din"

#: FlatCAMObj.py:222
msgid "to"
msgstr "la"

#: FlatCAMObj.py:233
msgid "Offsetting..."
msgstr "Ofsetare..."

#: FlatCAMObj.py:248
msgid "Scaling..."
msgstr "Scalare..."

#: FlatCAMObj.py:264
msgid "Skewing..."
msgstr "Deformare..."

#: FlatCAMObj.py:611 FlatCAMObj.py:2358 FlatCAMObj.py:3632
#: flatcamGUI/PreferencesUI.py:867 flatcamGUI/PreferencesUI.py:1821
msgid "Basic"
msgstr "Baza"

#: FlatCAMObj.py:623 FlatCAMObj.py:2370 FlatCAMObj.py:3652
#: flatcamGUI/PreferencesUI.py:868
msgid "Advanced"
msgstr "Avansat"

#: FlatCAMObj.py:792
msgid "Buffering solid geometry"
msgstr "Buferarea geometriei solide"

#: FlatCAMObj.py:795 camlib.py:612 flatcamGUI/PreferencesUI.py:1269
#: flatcamTools/ToolNonCopperClear.py:1562
#: flatcamTools/ToolNonCopperClear.py:1656
#: flatcamTools/ToolNonCopperClear.py:1668
#: flatcamTools/ToolNonCopperClear.py:1895
#: flatcamTools/ToolNonCopperClear.py:1987
#: flatcamTools/ToolNonCopperClear.py:1999
msgid "Buffering"
msgstr "Buferare"

#: FlatCAMObj.py:801
msgid "Done"
msgstr "Executat"

#: FlatCAMObj.py:842 FlatCAMObj.py:858 FlatCAMObj.py:875
msgid "Isolating..."
msgstr "Se izoleaza..."

#: FlatCAMObj.py:1079 FlatCAMObj.py:1195
#: flatcamTools/ToolNonCopperClear.py:1591
#: flatcamTools/ToolNonCopperClear.py:1919
msgid "Isolation geometry could not be generated."
msgstr "Geometria de izolare nu a fost posibil să fie generată."

#: FlatCAMObj.py:1116 FlatCAMObj.py:3323 FlatCAMObj.py:3590 FlatCAMObj.py:3862
msgid "Rough"
msgstr "Grosier"

#: FlatCAMObj.py:1141 FlatCAMObj.py:1218
msgid "Isolation geometry created"
msgstr "Geometria de izolare creată"

#: FlatCAMObj.py:1150 FlatCAMObj.py:1225
msgid "Subtracting Geo"
msgstr "Scădere Geo"

#: FlatCAMObj.py:1436
msgid "Plotting Apertures"
msgstr "Aperturile sunt in curs de afișare"

#: FlatCAMObj.py:2187 flatcamEditors/FlatCAMExcEditor.py:2320
msgid "Total Drills"
msgstr "Nr. Tot. Op. Găurire"

#: FlatCAMObj.py:2219 flatcamEditors/FlatCAMExcEditor.py:2352
msgid "Total Slots"
msgstr "Nr. Tot. Sloturi"

#: FlatCAMObj.py:2427 FlatCAMObj.py:3702 FlatCAMObj.py:3996 FlatCAMObj.py:4187
#: FlatCAMObj.py:4198 FlatCAMObj.py:4316 FlatCAMObj.py:4524 FlatCAMObj.py:4646
#: FlatCAMObj.py:4809 FlatCAMObj.py:5328
#: flatcamEditors/FlatCAMExcEditor.py:2427
#: flatcamEditors/FlatCAMGeoEditor.py:1082
#: flatcamEditors/FlatCAMGeoEditor.py:1119
#: flatcamEditors/FlatCAMGeoEditor.py:1140
#: flatcamEditors/FlatCAMGeoEditor.py:1161
#: flatcamEditors/FlatCAMGeoEditor.py:1198
#: flatcamEditors/FlatCAMGeoEditor.py:1230
#: flatcamEditors/FlatCAMGeoEditor.py:1251
#: flatcamEditors/FlatCAMGrbEditor.py:5361
#: flatcamEditors/FlatCAMGrbEditor.py:5404
#: flatcamEditors/FlatCAMGrbEditor.py:5431
#: flatcamEditors/FlatCAMGrbEditor.py:5458
#: flatcamEditors/FlatCAMGrbEditor.py:5499
#: flatcamEditors/FlatCAMGrbEditor.py:5537
#: flatcamEditors/FlatCAMGrbEditor.py:5563 flatcamTools/ToolCalculators.py:311
#: flatcamTools/ToolCalculators.py:322 flatcamTools/ToolCalculators.py:334
#: flatcamTools/ToolCalculators.py:349 flatcamTools/ToolCalculators.py:362
#: flatcamTools/ToolCalculators.py:376 flatcamTools/ToolCalculators.py:387
#: flatcamTools/ToolCalculators.py:398 flatcamTools/ToolCalculators.py:409
#: flatcamTools/ToolFilm.py:248 flatcamTools/ToolFilm.py:254
#: flatcamTools/ToolNonCopperClear.py:877
#: flatcamTools/ToolNonCopperClear.py:888
#: flatcamTools/ToolNonCopperClear.py:898
#: flatcamTools/ToolNonCopperClear.py:916
#: flatcamTools/ToolNonCopperClear.py:995
#: flatcamTools/ToolNonCopperClear.py:1077
#: flatcamTools/ToolNonCopperClear.py:1370
#: flatcamTools/ToolNonCopperClear.py:1402 flatcamTools/ToolPaint.py:713
#: flatcamTools/ToolPaint.py:788 flatcamTools/ToolPaint.py:936
#: flatcamTools/ToolPaint.py:990 flatcamTools/ToolPaint.py:1275
#: flatcamTools/ToolPaint.py:1552 flatcamTools/ToolPaint.py:2029
#: flatcamTools/ToolPanelize.py:397 flatcamTools/ToolPanelize.py:409
#: flatcamTools/ToolPanelize.py:422 flatcamTools/ToolPanelize.py:435
#: flatcamTools/ToolPanelize.py:447 flatcamTools/ToolPanelize.py:458
#: flatcamTools/ToolSolderPaste.py:764 flatcamTools/ToolSolderPaste.py:839
#: flatcamTools/ToolTransform.py:474 flatcamTools/ToolTransform.py:508
#: flatcamTools/ToolTransform.py:526 flatcamTools/ToolTransform.py:544
#: flatcamTools/ToolTransform.py:578 flatcamTools/ToolTransform.py:607
#: flatcamTools/ToolTransform.py:625
msgid "Wrong value format entered, use a number."
msgstr "Valoare in format incorect, foloseşte un număr."

#: FlatCAMObj.py:2668 FlatCAMObj.py:2760 FlatCAMObj.py:2881
msgid "Please select one or more tools from the list and try again."
msgstr "Selectează una sau mai multe unelte din lista și încearcă din nou."

#: FlatCAMObj.py:2674
msgid "Milling tool for DRILLS is larger than hole size. Cancelled."
msgstr ""
"Anulat. Freza pt frezarea găurilor este mai mare decat diametrul găurii."

#: FlatCAMObj.py:2689 FlatCAMObj.py:2782 FlatCAMObj.py:2900
msgid "Tool_nr"
msgstr "Nr. Unealtă"

#: FlatCAMObj.py:2689 FlatCAMObj.py:2782 FlatCAMObj.py:2900
#: flatcamEditors/FlatCAMExcEditor.py:1500
#: flatcamEditors/FlatCAMExcEditor.py:2935 flatcamGUI/ObjectUI.py:617
#: flatcamTools/ToolNonCopperClear.py:107 flatcamTools/ToolPaint.py:106
#: flatcamTools/ToolPcbWizard.py:76 flatcamTools/ToolSolderPaste.py:81
msgid "Diameter"
msgstr "Diametru"

#: FlatCAMObj.py:2689 FlatCAMObj.py:2782 FlatCAMObj.py:2900
msgid "Drills_Nr"
msgstr "Nr. gaura"

#: FlatCAMObj.py:2689 FlatCAMObj.py:2782 FlatCAMObj.py:2900
msgid "Slots_Nr"
msgstr "Nr. slot"

#: FlatCAMObj.py:2769
msgid "Milling tool for SLOTS is larger than hole size. Cancelled."
msgstr "Anulat. Freza este mai mare decat diametrul slotului de frezat."

#: FlatCAMObj.py:2941 FlatCAMObj.py:5022
msgid ""
"Wrong value format for self.defaults[\"z_pdepth\"] or self.options[\"z_pdepth"
"\"]"
msgstr ""
"Valoare gresita pt self.defaults[\"z_pdepth\"] sau self.options[\"z_pdepth\"]"

#: FlatCAMObj.py:2952 FlatCAMObj.py:5033
msgid ""
"Wrong value format for self.defaults[\"feedrate_probe\"] or self."
"options[\"feedrate_probe\"]"
msgstr ""
"Valoare gresita pt self.defaults[\"feedrate_probe\"] sau self."
"options[\"feedrate_probe\"]"

#: FlatCAMObj.py:2982 FlatCAMObj.py:4908 FlatCAMObj.py:4914 FlatCAMObj.py:5068
msgid "Generating CNC Code"
msgstr "CNC Code in curs de generare"

#: FlatCAMObj.py:3008 camlib.py:5757 camlib.py:6741
msgid ""
"The Toolchange X,Y field in Edit -> Preferences has to be in the format (x, "
"y) \n"
"but now there is only one value, not two. "
msgstr ""
"Parametrul >Schimbare Unealtă X, Y< in Editare -> Peferințe trebuie să fie "
"in formatul (x, y) \n"
"dar are o singură valoare in loc de doua. "

#: FlatCAMObj.py:3323 FlatCAMObj.py:4238 FlatCAMObj.py:4239 FlatCAMObj.py:4248
msgid "Iso"
msgstr "Izo"

#: FlatCAMObj.py:3323
msgid "Finish"
msgstr "Finisare"

#: FlatCAMObj.py:3626 flatcamGUI/FlatCAMGUI.py:552 flatcamGUI/FlatCAMGUI.py:759
#: flatcamGUI/FlatCAMGUI.py:1692 flatcamGUI/FlatCAMGUI.py:1789
#: flatcamGUI/FlatCAMGUI.py:2200 flatcamGUI/ObjectUI.py:1066
#: flatcamTools/ToolPanelize.py:540 flatcamTools/ToolPanelize.py:567
#: flatcamTools/ToolPanelize.py:667 flatcamTools/ToolPanelize.py:701
#: flatcamTools/ToolPanelize.py:766
msgid "Copy"
msgstr "Copiază"

#: FlatCAMObj.py:3833
msgid "Please enter the desired tool diameter in Float format."
msgstr "Introdu diametrul dorit pt unealtă in format Real."

#: FlatCAMObj.py:3907
msgid "Tool added in Tool Table."
msgstr "Unealtă adăugată in Tabela de Unelte."

#: FlatCAMObj.py:3911
msgid "Default Tool added. Wrong value format entered."
msgstr "Unealta implicita adăugată dar valoarea are un format gresit."

#: FlatCAMObj.py:3944 FlatCAMObj.py:3953
msgid "Failed. Select a tool to copy."
msgstr "Eșuat. Selectează o unealtă pt copiere."

#: FlatCAMObj.py:3981
msgid "Tool was copied in Tool Table."
msgstr "Unealta a fost copiata in Tabela de Unelte."

#: FlatCAMObj.py:4011
msgid "Tool was edited in Tool Table."
msgstr "Unealta a fost editata in Tabela de Unelte."

#: FlatCAMObj.py:4040 FlatCAMObj.py:4049
msgid "Failed. Select a tool to delete."
msgstr "Eșuat. Selectează o unealtă pentru ștergere."

#: FlatCAMObj.py:4072
msgid "Tool was deleted in Tool Table."
msgstr "Unealta a fost stearsa din Tabela de Unelte."

#: FlatCAMObj.py:4504
msgid "This Geometry can't be processed because it is"
msgstr "Acest obiect Geometrie nu poate fi procesat deoarece"

#: FlatCAMObj.py:4506
msgid "geometry"
msgstr "geometria"

#: FlatCAMObj.py:4549
msgid "Failed. No tool selected in the tool table ..."
msgstr "Eșuat. Nici-o unealtă nu este selectată in Tabela de Unelte ..."

#: FlatCAMObj.py:4651 FlatCAMObj.py:4815
msgid ""
"Tool Offset is selected in Tool Table but no value is provided.\n"
"Add a Tool Offset or change the Offset Type."
msgstr ""
"Un ofset pt unealtă este selectat in Tabela de Unelte dar nici-o val. nu "
"este oferita.\n"
"Adaugă un ofset pt unealtă sau schimbă Tipul Ofset."

#: FlatCAMObj.py:4716 FlatCAMObj.py:4875
msgid "G-Code parsing in progress..."
msgstr "Analiza codului G în curs ..."

#: FlatCAMObj.py:4718 FlatCAMObj.py:4877
msgid "G-Code parsing finished..."
msgstr "Analizarea codului G s-a terminat ..."

#: FlatCAMObj.py:4726
msgid "Finished G-Code processing"
msgstr "Prelucrarea G-Code terminată"

#: FlatCAMObj.py:4728 FlatCAMObj.py:4889
msgid "G-Code processing failed with error"
msgstr "Procesarea G-Code a eșuat cu eroarea"

#: FlatCAMObj.py:4776 flatcamTools/ToolSolderPaste.py:1187
msgid "Cancelled. Empty file, it has no geometry"
msgstr "Anulat. Fişier gol, nu are geometrie"

#: FlatCAMObj.py:4887 FlatCAMObj.py:5061
msgid "Finished G-Code processing..."
msgstr "Prelucrarea G-Code terminată ..."

#: FlatCAMObj.py:4911 FlatCAMObj.py:4917 FlatCAMObj.py:5071
msgid "CNCjob created"
msgstr "CNCjob creat"

#: FlatCAMObj.py:5103 FlatCAMObj.py:5113 camlib.py:3679 camlib.py:3689
msgid "Scale factor has to be a number: integer or float."
msgstr "Factorul de scalare trebuie să fie un număr: natural sau real."

#: FlatCAMObj.py:5187
msgid "Geometry Scale done."
msgstr "Scalare Geometrie executată."

#: FlatCAMObj.py:5204 camlib.py:3783
msgid ""
"An (x,y) pair of values are needed. Probable you entered only one value in "
"the Offset field."
msgstr ""
"O pereche de valori (x,y) este necesară. Probabil că ai introdus numai o "
"singură valoare in câmpul Offset."

#: FlatCAMObj.py:5258
msgid "Geometry Offset done."
msgstr "Ofset Geometrie executat."

#: FlatCAMObj.py:5287
msgid ""
"The Toolchange X,Y field in Edit -> Preferences has to be in the format (x, "
"y)\n"
"but now there is only one value, not two."
msgstr ""
"Parametrul >Schimbare Unealtă X, Y< in Editare -> Peferințele trebuie să fie "
"in formatul (x, y) \n"
"dar are o singură valoare in loc de două."

#: FlatCAMObj.py:5765
msgid "<span style=\"color:green;\"><b>Basic</b></span>"
msgstr "<span style=\"color:green;\"><b>Baza</b></span>"

#: FlatCAMObj.py:5771
msgid "<span style=\"color:red;\"><b>Advanced</b></span>"
msgstr "<span style=\"color:red;\"><b>Avansat</b></span>"

#: FlatCAMObj.py:5814
msgid "Plotting..."
msgstr "Se afișeaza..."

#: FlatCAMObj.py:5838 FlatCAMObj.py:5843 flatcamTools/ToolSolderPaste.py:1393
msgid "Export Machine Code ..."
msgstr "Exporta CNC Cod Masina ..."

#: FlatCAMObj.py:5849 flatcamTools/ToolSolderPaste.py:1397
msgid "Export Machine Code cancelled ..."
msgstr "Exportul Codului Mașina a fost anulat ..."

#: FlatCAMObj.py:5867
msgid "Machine Code file saved to"
msgstr "Fişierul cu cod CNC este salvat in"

#: FlatCAMObj.py:5900
msgid "Loaded Machine Code into Code Editor"
msgstr "S-a încărcat Codul Masina în Editorul Cod"

#: FlatCAMObj.py:6015
msgid "This CNCJob object can't be processed because it is a"
msgstr "Acest obiect CNCJob nu poate fi procesat deoarece este un"

#: FlatCAMObj.py:6017
msgid "CNCJob object"
msgstr "Obiect CNCJob"

#: FlatCAMObj.py:6069
msgid "G-code does not have a units code: either G20 or G21"
msgstr "G-code nu contine codul pt unitati: G20 sau G21"

#: FlatCAMObj.py:6081
msgid "Cancelled. The Toolchange Custom code is enabled but it's empty."
msgstr ""
"Anulat. Codul G-Code din Macro-ul Schimbare unealtă este activat dar nu "
"contine nimic."

#: FlatCAMObj.py:6087
msgid "Toolchange G-code was replaced by a custom code."
msgstr "G-Code-ul pt schimbare unealtă a fost inlocuit cu un cod pesonalizat."

#: FlatCAMObj.py:6124 FlatCAMObj.py:6134
msgid ""
"The used postprocessor file has to have in it's name: 'toolchange_custom'"
msgstr ""
"Postprocesorul folosit trebuie să aibă in numele sau: 'toolchange_custom'"

#: FlatCAMObj.py:6138
msgid "There is no postprocessor file."
msgstr "Nu exista nici-un fişier postprocesor."

#: FlatCAMProcess.py:172
msgid "processes running."
msgstr "procesele care rulează."

#: FlatCAMTranslation.py:92
msgid "The application will restart."
msgstr "Aplicaţia va reporni ..."

#: FlatCAMTranslation.py:94
msgid "Are you sure do you want to change the current language to"
msgstr "Esti sigur că dorești să schimbi din limba curentă in"

#: FlatCAMTranslation.py:95
msgid "Apply Language ..."
msgstr "Aplică Traducere ..."

#: ObjectCollection.py:426
#, python-brace-format
msgid "Object renamed from <b>{old}</b> to <b>{new}</b>"
msgstr "Obiectul este redenumit din <b>{old}</b> in <b>{new}</b>"

#: ObjectCollection.py:769
msgid "Cause of error"
msgstr "Motivul erorii"

#: camlib.py:223
msgid "self.solid_geometry is neither BaseGeometry or list."
msgstr "self.solid_geometry nu este tip BaseGeometry sau tip listă."

#: camlib.py:602
msgid "Pass"
msgstr "Treceri"

#: camlib.py:622
msgid "Get Exteriors"
msgstr "Obtine Exterior"

#: camlib.py:625
msgid "Get Interiors"
msgstr "Obtine Interioare"

#: camlib.py:1547
msgid "Object was mirrored"
msgstr "Obiectul a fost oglindit"

#: camlib.py:1550
msgid "Failed to mirror. No object selected"
msgstr "Oglindire eșuată. Nici-un obiect nu este selectat"

#: camlib.py:1619
msgid "Object was rotated"
msgstr "Obiectul a fost rotit"

#: camlib.py:1622
msgid "Failed to rotate. No object selected"
msgstr "Rotaţie eșuată. Nici-un obiect nu este selectat"

#: camlib.py:1690
msgid "Object was skewed"
msgstr "Obiectul a fost deformat"

#: camlib.py:1693
msgid "Failed to skew. No object selected"
msgstr "Deformare eșuată. Nici-un obiect nu este selectat"

#: camlib.py:2470
msgid "Gerber processing. Parsing"
msgstr "Prelucrare Gerber. Analizare"

#: camlib.py:2470
msgid "lines"
msgstr "linii"

#: camlib.py:2991 camlib.py:3087
msgid "Coordinates missing, line ignored"
msgstr "Coordonatele lipsesc, linia este ignorată"

#: camlib.py:2993 camlib.py:3089
msgid "GERBER file might be CORRUPT. Check the file !!!"
msgstr "Fişierul Gerber poate fi corrupt. Verificati fişierul!!!"

#: camlib.py:3043
msgid ""
"Region does not have enough points. File will be processed but there are "
"parser errors. Line number"
msgstr ""
"Regiunea Gerber nu are suficiente puncte. Fişierul va fi procesat dar sunt "
"erori de parsare. Numărul liniei"

#: camlib.py:3441
msgid "Gerber processing. Joining polygons"
msgstr "Prelucrare Gerber. Se combină poligoanele"

#: camlib.py:3458
msgid "Gerber processing. Applying Gerber polarity."
msgstr "Prelucrare Gerber. Se aplica polaritatea Gerber."

#: camlib.py:3497
msgid "Gerber Line"
msgstr "Linia Gerber"

#: camlib.py:3497
msgid "Gerber Line Content"
msgstr "Continut linie Gerber"

#: camlib.py:3499
msgid "Gerber Parser ERROR"
msgstr "Eroare in parserul Gerber"

#: camlib.py:3747
msgid "Gerber Scale done."
msgstr "Scalarea Gerber efectuată."

#: camlib.py:3837
msgid "Gerber Offset done."
msgstr "Offsetare Gerber efectuată."

#: camlib.py:3914
msgid "Gerber Mirror done."
msgstr "Oglindirea Gerber efectuată."

#: camlib.py:3983
msgid "Gerber Skew done."
msgstr "Deformarea Gerber efectuată."

#: camlib.py:4044
msgid "Gerber Rotate done."
msgstr "Rotatia Gerber efectuată."

#: camlib.py:4331
msgid "This is GCODE mark"
msgstr "Acesta este un marcaj Gerber"

#: camlib.py:4447
msgid ""
"No tool diameter info's. See shell.\n"
"A tool change event: T"
msgstr ""
"Nu există informații despre diametrul uneltei. Vezi Shell.\n"
"Un eveniment de schimbare a uneltei: T"

#: camlib.py:4450
msgid ""
"was found but the Excellon file have no informations regarding the tool "
"diameters therefore the application will try to load it by using some 'fake' "
"diameters.\n"
"The user needs to edit the resulting Excellon object and change the "
"diameters to reflect the real diameters."
msgstr ""
"a fost gasită dar fisierul Excellon nu are info's despre diametrele "
"uneltelor prin urmare aplicatia va folosi valori 'false'.\n"
"Userul trebuie să editeze obictul Excellon rezultat si sa ajusteze "
"diametrele a.i sa reflecte diametrele reale."

#: camlib.py:4905
#, python-brace-format
msgid ""
"{e_code} Excellon Parser error.\n"
"Parsing Failed. Line {l_nr}: {line}\n"
msgstr ""
"{e_code} Eroare de analiza Excellon.\n"
"Analizarea a esuat. Linia {l_nr}: {line}\n"

#: camlib.py:4988
msgid ""
"Excellon.create_geometry() -> a drill location was skipped due of not having "
"a tool associated.\n"
"Check the resulting GCode."
msgstr ""
"Excellon.create_geometry() -> o locaţie de găurire a fost sarita deoarece nu "
"are o unealtă asociata.\n"
"Verifică codul G-Code rezultat."

#: camlib.py:5662
msgid "There is no such parameter"
msgstr "Nu exista un asemenea parametru"

#: camlib.py:5734
msgid ""
"The Cut Z parameter has positive value. It is the depth value to drill into "
"material.\n"
"The Cut Z parameter needs to have a negative value, assuming it is a typo "
"therefore the app will convert the value to negative. Check the resulting "
"CNC code (Gcode etc)."
msgstr ""
"Parametrul >Z tăiere< are o valoare pozitivă. Reprezinta adâncimea de tăiere "
"in material prin urmare poate fi numai negativ.\n"
"Se presupune că este o eroare de tastare astfel ca aplicaţia va converti "
"intr-o valoare negativă. Verifică codul masina (G-Code etc) rezultat."

#: camlib.py:5742 camlib.py:6417 camlib.py:6767
msgid "The Cut Z parameter is zero. There will be no cut, skipping file"
msgstr ""
"Parametrul >Z tăiere< este nul. Nu va fi nici-o tăiere prin urmare nu "
"procesam fişierul"

#: camlib.py:5794
msgid "Creating a list of points to drill..."
msgstr "Crearea unei liste de puncte pentru găurire ..."

#: camlib.py:5877
msgid "Starting G-Code"
msgstr "Începând G-Code"

#: camlib.py:5975 camlib.py:6122 camlib.py:6227 camlib.py:6533 camlib.py:6881
msgid "Starting G-Code for tool with diameter"
msgstr "Pornirea codului G pentru scula cu diametrul"

#: camlib.py:6032 camlib.py:6179 camlib.py:6285
msgid "G91 coordinates not implemented"
msgstr "Coordonatele G91 nu au fost implementate"

#: camlib.py:6038 camlib.py:6185 camlib.py:6291
msgid "The loaded Excellon file has no drills"
msgstr "Fişierul Excellon incărcat nu are găuri"

#: camlib.py:6313
msgid "Finished G-Code generation..."
msgstr "Generarea G-Code finalizata ..."

#: camlib.py:6390
msgid ""
"The Toolchange X,Y field in Edit -> Preferences has to be in the format (x, "
"y) \n"
"but now there is only one value, not two."
msgstr ""
"Parametrul >Schimbare Unealtă X, Y< in Editare -> Peferințe trebuie să fie "
"in formatul (x, y) \n"
"dar are o singură valoare in loc de doua."

#: camlib.py:6403 camlib.py:6753
msgid ""
"Cut_Z parameter is None or zero. Most likely a bad combinations of other "
"parameters."
msgstr ""
"Parametrul >Z tăiere< este None sau zero. Cel mai probabil o combinaţie "
"nefericita de parametri."

#: camlib.py:6409 camlib.py:6759
msgid ""
"The Cut Z parameter has positive value. It is the depth value to cut into "
"material.\n"
"The Cut Z parameter needs to have a negative value, assuming it is a typo "
"therefore the app will convert the value to negative.Check the resulting CNC "
"code (Gcode etc)."
msgstr ""
"Parametrul >Z tăiere< are o valoare pozitivă. Reprezinta adâncimea de tăiere "
"in material prin urmare poate fi numai negativ.\n"
"Se presupune că este o eroare de tastare astfel ca aplicaţia va converti "
"intr-o valoare negativă. Verifică codul masina (G-Code etc) rezultat."

#: camlib.py:6427 camlib.py:6773
msgid "Travel Z parameter is None or zero."
msgstr "Parametrul >Z deplasare< este None sau zero."

#: camlib.py:6432 camlib.py:6778
msgid ""
"The Travel Z parameter has negative value. It is the height value to travel "
"between cuts.\n"
"The Z Travel parameter needs to have a positive value, assuming it is a typo "
"therefore the app will convert the value to positive.Check the resulting CNC "
"code (Gcode etc)."
msgstr ""
"Parametrul >Z deplasare< are o valoare negativă. Reprezinta Înălţimea la "
"care unealtă se deplasează fără să taie prin urmare poate fi numai pozitiv.\n"
"Se presupune că este o eroare de tastare astfel ca aplicaţia va converti "
"intr-o valoare pozitivă. Verifică codul masina (G-Code etc) rezultat."

#: camlib.py:6440 camlib.py:6786
msgid "The Z Travel parameter is zero. This is dangerous, skipping file"
msgstr ""
"Parametrul >Z deplasare< este zero. Aceasta este periculos, prin urmare nu "
"se procesează fişierul"

#: camlib.py:6455 camlib.py:6805
msgid "Indexing geometry before generating G-Code..."
msgstr "Geometria se indexeaza înainte de a genera G-Code..."

#: camlib.py:6516 camlib.py:6867
msgid "Starting G-Code..."
msgstr "Pornirea G-Code ..."

#: camlib.py:6603 camlib.py:6951
msgid "Finished G-Code generation"
msgstr "Generarea G-Code terminată"

#: camlib.py:6605
msgid "paths traced"
msgstr "căi trasate"

#: camlib.py:6641
msgid "Expected a Geometry, got"
msgstr "Se astepta o Geometrie, am primit in schimb"

#: camlib.py:6648
msgid ""
"Trying to generate a CNC Job from a Geometry object without solid_geometry."
msgstr ""
"Se încearcă generarea unui CNC Job dintr-un obiect Geometrie fără atributul "
"solid_geometry."

#: camlib.py:6688
msgid ""
"The Tool Offset value is too negative to use for the current_geometry.\n"
"Raise the value (in module) and try again."
msgstr ""
"Valoarea pentru >Offset unealtă< este prea negativă pentru a fi folosita. pt "
"current_geometry \n"
"Mareste valoarea absoluta și încearcă din nou."

#: camlib.py:6953
msgid " paths traced."
msgstr " căi trasate."

#: camlib.py:6982
msgid "There is no tool data in the SolderPaste geometry."
msgstr "Nu există date cu privire la unealtă in Geometria SolderPaste."

#: camlib.py:7069
msgid "Finished SolderPste G-Code generation"
msgstr "Generarea G-Code SolderPaste s-a terminat"

#: camlib.py:7071
msgid "paths traced."
msgstr "căi trasate."

#: camlib.py:7544 camlib.py:7822 camlib.py:7925 camlib.py:7972
msgid "G91 coordinates not implemented ..."
msgstr "Coordonatele G91 nu au fost implementate ..."

#: flatcamEditors/FlatCAMExcEditor.py:45 flatcamEditors/FlatCAMExcEditor.py:70
#: flatcamEditors/FlatCAMExcEditor.py:152
#: flatcamEditors/FlatCAMExcEditor.py:356
#: flatcamEditors/FlatCAMExcEditor.py:548
#: flatcamEditors/FlatCAMGrbEditor.py:238
#: flatcamEditors/FlatCAMGrbEditor.py:243
msgid "Click to place ..."
msgstr "Click pt a plasa ..."

#: flatcamEditors/FlatCAMExcEditor.py:54
msgid "To add a drill first select a tool"
msgstr ""
"Pentru a adăuga o operaţie de găurire mai intai selectează un burghiu "
"(unealtă)"

#: flatcamEditors/FlatCAMExcEditor.py:117
msgid "Done. Drill added."
msgstr "Executat. Operaţie de găurire adăugată."

#: flatcamEditors/FlatCAMExcEditor.py:160
msgid "To add an Drill Array first select a tool in Tool Table"
msgstr ""
"Pentru a adăuga o arie de operațiuni de găurire mai intai selectează un "
"burghiu (unealtă)"

#: flatcamEditors/FlatCAMExcEditor.py:176
#: flatcamEditors/FlatCAMExcEditor.py:386
#: flatcamEditors/FlatCAMExcEditor.py:596
#: flatcamEditors/FlatCAMExcEditor.py:1098
#: flatcamEditors/FlatCAMExcEditor.py:1123
#: flatcamEditors/FlatCAMGrbEditor.py:462
#: flatcamEditors/FlatCAMGrbEditor.py:1859
#: flatcamEditors/FlatCAMGrbEditor.py:1887
msgid "Click on target location ..."
msgstr "Click pe locatia tintă ..."

#: flatcamEditors/FlatCAMExcEditor.py:193
msgid "Click on the Drill Circular Array Start position"
msgstr "Click pe punctul de Start al ariei de operațiuni de găurire"

#: flatcamEditors/FlatCAMExcEditor.py:215
#: flatcamEditors/FlatCAMExcEditor.py:635
#: flatcamEditors/FlatCAMGrbEditor.py:505
msgid "The value is not Float. Check for comma instead of dot separator."
msgstr ""
"Valoarea nu este număr Real. Verifică să nu fi folosit virgula in loc de "
"punct ca și separator decimal."

#: flatcamEditors/FlatCAMExcEditor.py:219
msgid "The value is mistyped. Check the value"
msgstr "Valoarea este gresită. Verifică ce ai introdus"

#: flatcamEditors/FlatCAMExcEditor.py:318
msgid "Too many drills for the selected spacing angle."
msgstr "Prea multe operațiuni de găurire pentru unghiul selectat."

#: flatcamEditors/FlatCAMExcEditor.py:336
msgid "Done. Drill Array added."
msgstr "Executat. Aria de operațiuni de găurire a fost adăugată."

#: flatcamEditors/FlatCAMExcEditor.py:365
msgid "To add a slot first select a tool"
msgstr "Pentru a adăuga un slot mai întâi, selectați o unealtă"

#: flatcamEditors/FlatCAMExcEditor.py:423
#: flatcamEditors/FlatCAMExcEditor.py:430
#: flatcamEditors/FlatCAMExcEditor.py:701
#: flatcamEditors/FlatCAMExcEditor.py:708
msgid "Value is missing or wrong format. Add it and retry."
msgstr ""
"Valoarea lipsește sau formatul greșit. Adăugați-l și încercați din nou."

#: flatcamEditors/FlatCAMExcEditor.py:529
msgid "Done. Adding Slot completed."
msgstr "Terminat. Adăugarea slotului finalizată."

#: flatcamEditors/FlatCAMExcEditor.py:556
msgid "To add an Slot Array first select a tool in Tool Table"
msgstr ""
"Pentru a adăuga o arie de sloturi, selectați mai întâi o unealtă din tabelul "
"de unelte"

#: flatcamEditors/FlatCAMExcEditor.py:613
msgid "Click on the Slot Circular Array Start position"
msgstr "Faceți clic pe poziția de pornire a ariei circulare de slotuluri"

#: flatcamEditors/FlatCAMExcEditor.py:639
#: flatcamEditors/FlatCAMGrbEditor.py:509
msgid "The value is mistyped. Check the value."
msgstr "Valoarea este gresită. Verifică ce ai introdus."

#: flatcamEditors/FlatCAMExcEditor.py:818
msgid "Too many Slots for the selected spacing angle."
msgstr "Prea multe sloturi pentru unghiul de distanțare selectat."

#: flatcamEditors/FlatCAMExcEditor.py:841
msgid "Done. Slot Array added."
msgstr "Terminat. S-a adăugat aria de sloturi."

#: flatcamEditors/FlatCAMExcEditor.py:858
msgid "Click on the Drill(s) to resize ..."
msgstr ""
"Click pe operațiunile de găurire care se dorește să fie redimensionate ..."

#: flatcamEditors/FlatCAMExcEditor.py:888
msgid "Resize drill(s) failed. Please enter a diameter for resize."
msgstr ""
"Redimensionarea operațiunilor de găurire a eșuat. Adaugă o valoare pentru "
"dimetrul la care se face redimensionarea."

#: flatcamEditors/FlatCAMExcEditor.py:978
#: flatcamEditors/FlatCAMExcEditor.py:1048 flatcamGUI/FlatCAMGUI.py:2724
#: flatcamGUI/FlatCAMGUI.py:2932 flatcamGUI/FlatCAMGUI.py:3146
msgid "Cancelled."
msgstr "Anulat."

#: flatcamEditors/FlatCAMExcEditor.py:1069
msgid "Done. Drill/Slot Resize completed."
msgstr "Executat. Redimensionarea Perforării / slotului finalizată."

#: flatcamEditors/FlatCAMExcEditor.py:1072
msgid "Cancelled. No drills/slots selected for resize ..."
msgstr "Anulat. Nu au fost selectate găuri / sloturi pentru redimensionare ..."

#: flatcamEditors/FlatCAMExcEditor.py:1100
#: flatcamEditors/FlatCAMGrbEditor.py:1861
msgid "Click on reference location ..."
msgstr "Click pe locatia de referinţă ..."

#: flatcamEditors/FlatCAMExcEditor.py:1156
msgid "Done. Drill(s) Move completed."
msgstr "Executat. Operatiile de găurire au fost mutate."

#: flatcamEditors/FlatCAMExcEditor.py:1254
msgid "Done. Drill(s) copied."
msgstr "Executat. Operatiile de găurire au fost copiate."

#: flatcamEditors/FlatCAMExcEditor.py:1473 flatcamGUI/PreferencesUI.py:2328
msgid "Excellon Editor"
msgstr "Editor Excellon"

#: flatcamEditors/FlatCAMExcEditor.py:1480
#: flatcamEditors/FlatCAMGrbEditor.py:2361
msgid "Name:"
msgstr "Nume:"

#: flatcamEditors/FlatCAMExcEditor.py:1486 flatcamGUI/ObjectUI.py:597
#: flatcamGUI/ObjectUI.py:924 flatcamTools/ToolNonCopperClear.py:96
#: flatcamTools/ToolPaint.py:95 flatcamTools/ToolSolderPaste.py:70
msgid "Tools Table"
msgstr "Tabela Unelte"

#: flatcamEditors/FlatCAMExcEditor.py:1488 flatcamGUI/ObjectUI.py:599
msgid ""
"Tools in this Excellon object\n"
"when are used for drilling."
msgstr ""
"Burghie (unelte) in acest obiect Excellon\n"
"când se face găurire."

#: flatcamEditors/FlatCAMExcEditor.py:1508
msgid "Add/Delete Tool"
msgstr "Adaugă/Șterge Unealta"

#: flatcamEditors/FlatCAMExcEditor.py:1510
msgid ""
"Add/Delete a tool to the tool list\n"
"for this Excellon object."
msgstr ""
"Adaugă/Șterge o unealtă la lista de unelte\n"
"pentru acest obiect Excellon."

#: flatcamEditors/FlatCAMExcEditor.py:1518 flatcamGUI/ObjectUI.py:1042
#: flatcamTools/ToolNonCopperClear.py:212 flatcamTools/ToolPaint.py:162
msgid "Tool Dia"
msgstr "Dia Unealtă"

#: flatcamEditors/FlatCAMExcEditor.py:1520 flatcamGUI/ObjectUI.py:1045
#: flatcamGUI/PreferencesUI.py:2357
msgid "Diameter for the new tool"
msgstr "Diametru pentru noua unealtă (burghiu, freza)"

#: flatcamEditors/FlatCAMExcEditor.py:1528
msgid "Add Tool"
msgstr "Adaugă Unealta"

#: flatcamEditors/FlatCAMExcEditor.py:1530
msgid ""
"Add a new tool to the tool list\n"
"with the diameter specified above."
msgstr ""
"Adaugă o unealtă noua la lista de unelte\n"
"cu diametrul specificat deasupra."

#: flatcamEditors/FlatCAMExcEditor.py:1542
msgid "Delete Tool"
msgstr "Șterge Unealta"

#: flatcamEditors/FlatCAMExcEditor.py:1544
msgid ""
"Delete a tool in the tool list\n"
"by selecting a row in the tool table."
msgstr ""
"Șterge o unealtă in lista de unelte\n"
"prin selectarea unei linii in tabela de unelte."

#: flatcamEditors/FlatCAMExcEditor.py:1562 flatcamGUI/FlatCAMGUI.py:1582
msgid "Resize Drill(s)"
msgstr "Redimensionare operațiuni de găurire"

#: flatcamEditors/FlatCAMExcEditor.py:1564
msgid "Resize a drill or a selection of drills."
msgstr ""
"Redimensionează o operaţie de găurire sau o selecţie de operațiuni de "
"găurire."

#: flatcamEditors/FlatCAMExcEditor.py:1571
msgid "Resize Dia"
msgstr "Redimens. Dia"

#: flatcamEditors/FlatCAMExcEditor.py:1573
msgid "Diameter to resize to."
msgstr "Diametrul la care se face redimensionarea."

#: flatcamEditors/FlatCAMExcEditor.py:1581
msgid "Resize"
msgstr "Redimensionează"

#: flatcamEditors/FlatCAMExcEditor.py:1583
msgid "Resize drill(s)"
msgstr "Redimensionează op. de găurire."

#: flatcamEditors/FlatCAMExcEditor.py:1608 flatcamGUI/FlatCAMGUI.py:1581
#: flatcamGUI/FlatCAMGUI.py:1781
msgid "Add Drill Array"
msgstr "Adaugă o arie de op. găurire"

#: flatcamEditors/FlatCAMExcEditor.py:1610
msgid "Add an array of drills (linear or circular array)"
msgstr "Adaugă o arie de operațiuni de găurire (arie lineara sau circulara)."

#: flatcamEditors/FlatCAMExcEditor.py:1616
msgid ""
"Select the type of drills array to create.\n"
"It can be Linear X(Y) or Circular"
msgstr ""
"Selectează tipul de arii de operațiuni de găurire.\n"
"Poate fi Liniar X(Y) sau Circular"

#: flatcamEditors/FlatCAMExcEditor.py:1619
#: flatcamEditors/FlatCAMExcEditor.py:1821
#: flatcamEditors/FlatCAMGrbEditor.py:2647
msgid "Linear"
msgstr "Liniar"

#: flatcamEditors/FlatCAMExcEditor.py:1620
#: flatcamEditors/FlatCAMExcEditor.py:1822
#: flatcamEditors/FlatCAMGrbEditor.py:2648 flatcamGUI/PreferencesUI.py:3319
#: flatcamTools/ToolNonCopperClear.py:203
msgid "Circular"
msgstr "Circular"

#: flatcamEditors/FlatCAMExcEditor.py:1628 flatcamGUI/PreferencesUI.py:2367
msgid "Nr of drills"
msgstr "Nr. op. găurire"

#: flatcamEditors/FlatCAMExcEditor.py:1629 flatcamGUI/PreferencesUI.py:2369
msgid "Specify how many drills to be in the array."
msgstr "Specifica cate operațiuni de găurire să fie incluse in arie."

#: flatcamEditors/FlatCAMExcEditor.py:1646
#: flatcamEditors/FlatCAMExcEditor.py:1693
#: flatcamEditors/FlatCAMExcEditor.py:1757
#: flatcamEditors/FlatCAMExcEditor.py:1848
#: flatcamEditors/FlatCAMExcEditor.py:1895
#: flatcamEditors/FlatCAMGrbEditor.py:1523
#: flatcamEditors/FlatCAMGrbEditor.py:2674
#: flatcamEditors/FlatCAMGrbEditor.py:2719 flatcamGUI/PreferencesUI.py:2461
msgid "Direction"
msgstr "Direcţie"

#: flatcamEditors/FlatCAMExcEditor.py:1648
#: flatcamEditors/FlatCAMExcEditor.py:1850
#: flatcamEditors/FlatCAMGrbEditor.py:2676 flatcamGUI/PreferencesUI.py:1517
#: flatcamGUI/PreferencesUI.py:2384 flatcamGUI/PreferencesUI.py:2515
msgid ""
"Direction on which the linear array is oriented:\n"
"- 'X' - horizontal axis \n"
"- 'Y' - vertical axis or \n"
"- 'Angle' - a custom angle for the array inclination"
msgstr ""
"Directia in care aria lineara este orientata:\n"
"- 'X' - pe axa orizontala \n"
"- 'Y' - pe axa verticala sau \n"
"- 'Unghi' - un unghi particular pentru inclinatia ariei"

#: flatcamEditors/FlatCAMExcEditor.py:1655
#: flatcamEditors/FlatCAMExcEditor.py:1766
#: flatcamEditors/FlatCAMExcEditor.py:1857
#: flatcamEditors/FlatCAMGrbEditor.py:2683 flatcamGUI/PreferencesUI.py:1523
#: flatcamGUI/PreferencesUI.py:2390 flatcamGUI/PreferencesUI.py:2470
#: flatcamGUI/PreferencesUI.py:2521
msgid "X"
msgstr "X"

#: flatcamEditors/FlatCAMExcEditor.py:1656
#: flatcamEditors/FlatCAMExcEditor.py:1767
#: flatcamEditors/FlatCAMExcEditor.py:1858
#: flatcamEditors/FlatCAMGrbEditor.py:2684 flatcamGUI/PreferencesUI.py:1524
#: flatcamGUI/PreferencesUI.py:2391 flatcamGUI/PreferencesUI.py:2471
#: flatcamGUI/PreferencesUI.py:2522
msgid "Y"
msgstr "Y"

#: flatcamEditors/FlatCAMExcEditor.py:1657
#: flatcamEditors/FlatCAMExcEditor.py:1671
#: flatcamEditors/FlatCAMExcEditor.py:1705
#: flatcamEditors/FlatCAMExcEditor.py:1768
#: flatcamEditors/FlatCAMExcEditor.py:1772
#: flatcamEditors/FlatCAMExcEditor.py:1859
#: flatcamEditors/FlatCAMExcEditor.py:1873
#: flatcamEditors/FlatCAMExcEditor.py:1907
#: flatcamEditors/FlatCAMGrbEditor.py:2685
#: flatcamEditors/FlatCAMGrbEditor.py:2698
#: flatcamEditors/FlatCAMGrbEditor.py:2734 flatcamGUI/PreferencesUI.py:1525
#: flatcamGUI/PreferencesUI.py:1542 flatcamGUI/PreferencesUI.py:2392
#: flatcamGUI/PreferencesUI.py:2409 flatcamGUI/PreferencesUI.py:2472
#: flatcamGUI/PreferencesUI.py:2477 flatcamGUI/PreferencesUI.py:2523
#: flatcamGUI/PreferencesUI.py:2540 flatcamTools/ToolTransform.py:68
msgid "Angle"
msgstr "Unghi"

#: flatcamEditors/FlatCAMExcEditor.py:1661
#: flatcamEditors/FlatCAMExcEditor.py:1863
#: flatcamEditors/FlatCAMGrbEditor.py:2689 flatcamGUI/PreferencesUI.py:1531
#: flatcamGUI/PreferencesUI.py:2398 flatcamGUI/PreferencesUI.py:2529
msgid "Pitch"
msgstr "Pas"

#: flatcamEditors/FlatCAMExcEditor.py:1663
#: flatcamEditors/FlatCAMExcEditor.py:1865
#: flatcamEditors/FlatCAMGrbEditor.py:2691 flatcamGUI/PreferencesUI.py:1533
#: flatcamGUI/PreferencesUI.py:2400 flatcamGUI/PreferencesUI.py:2531
msgid "Pitch = Distance between elements of the array."
msgstr "Pas = Distanta între elementele ariei."

#: flatcamEditors/FlatCAMExcEditor.py:1673
#: flatcamEditors/FlatCAMExcEditor.py:1875
#: flatcamEditors/FlatCAMGrbEditor.py:2700
msgid ""
"Angle at which the linear array is placed.\n"
"The precision is of max 2 decimals.\n"
"Min value is: -359.99 degrees.\n"
"Max value is:  360.00 degrees."
msgstr ""
"Unghiul global la care aria lineara este plasata.\n"
"Precizia este de max 2 zecimale.\n"
"Val minima este: -359.99 grade.\n"
"Val maxima este:  360.00 grade."

#: flatcamEditors/FlatCAMExcEditor.py:1694
#: flatcamEditors/FlatCAMExcEditor.py:1896
#: flatcamEditors/FlatCAMGrbEditor.py:2721
msgid ""
"Direction for circular array.Can be CW = clockwise or CCW = counter "
"clockwise."
msgstr ""
"Directia pentru aria circulară. Poate fi CW = in sensul acelor de ceasornic "
"sau CCW = invers acelor de ceasornic."

#: flatcamEditors/FlatCAMExcEditor.py:1701
#: flatcamEditors/FlatCAMExcEditor.py:1903
#: flatcamEditors/FlatCAMGrbEditor.py:2729 flatcamGUI/PreferencesUI.py:1561
#: flatcamGUI/PreferencesUI.py:2141 flatcamGUI/PreferencesUI.py:2428
#: flatcamGUI/PreferencesUI.py:2559 flatcamGUI/PreferencesUI.py:2884
msgid "CW"
msgstr "Orar"

#: flatcamEditors/FlatCAMExcEditor.py:1702
#: flatcamEditors/FlatCAMExcEditor.py:1904
#: flatcamEditors/FlatCAMGrbEditor.py:2730 flatcamGUI/PreferencesUI.py:1562
#: flatcamGUI/PreferencesUI.py:2142 flatcamGUI/PreferencesUI.py:2429
#: flatcamGUI/PreferencesUI.py:2560 flatcamGUI/PreferencesUI.py:2885
msgid "CCW"
msgstr "Antiorar"

#: flatcamEditors/FlatCAMExcEditor.py:1706
#: flatcamEditors/FlatCAMExcEditor.py:1908
#: flatcamEditors/FlatCAMGrbEditor.py:2736 flatcamGUI/PreferencesUI.py:1544
#: flatcamGUI/PreferencesUI.py:1570 flatcamGUI/PreferencesUI.py:2411
#: flatcamGUI/PreferencesUI.py:2437 flatcamGUI/PreferencesUI.py:2542
#: flatcamGUI/PreferencesUI.py:2568
msgid "Angle at which each element in circular array is placed."
msgstr ""
"Unghiul la care fiecare element al ariei circulare este plasat fata de "
"originea ariei."

#: flatcamEditors/FlatCAMExcEditor.py:1736
msgid "Slot Parameters"
msgstr "Parametrii pt slot"

#: flatcamEditors/FlatCAMExcEditor.py:1738
msgid ""
"Parameters for adding a slot (hole with oval shape)\n"
"either single or as an part of an array."
msgstr ""
"Parametri pentru adăugarea unui slot (gaură cu formă ovală)\n"
"fie single sau ca parte a unei arii."

#: flatcamEditors/FlatCAMExcEditor.py:1747 flatcamGUI/PreferencesUI.py:2450
#: flatcamTools/ToolProperties.py:350
msgid "Length"
msgstr "Lungime"

#: flatcamEditors/FlatCAMExcEditor.py:1749 flatcamGUI/PreferencesUI.py:2452
msgid "Length = The length of the slot."
msgstr "Lungime = Lungimea slotului."

#: flatcamEditors/FlatCAMExcEditor.py:1759 flatcamGUI/PreferencesUI.py:2463
msgid ""
"Direction on which the slot is oriented:\n"
"- 'X' - horizontal axis \n"
"- 'Y' - vertical axis or \n"
"- 'Angle' - a custom angle for the slot inclination"
msgstr ""
"Direcția spre care este orientat slotul:\n"
"- „X” - axa orizontală\n"
"- „Y” - axa verticală sau\n"
"- „Unghi” - un unghi personalizat pentru înclinarea slotului"

#: flatcamEditors/FlatCAMExcEditor.py:1774 flatcamGUI/PreferencesUI.py:2479
msgid ""
"Angle at which the slot is placed.\n"
"The precision is of max 2 decimals.\n"
"Min value is: -359.99 degrees.\n"
"Max value is:  360.00 degrees."
msgstr ""
"Unghiul la care este plasat slotul.\n"
"Precizia este de maxim 2 zecimale.\n"
"Valoarea minimă este: -359,99 grade.\n"
"Valoarea maximă este: 360,00 grade."

#: flatcamEditors/FlatCAMExcEditor.py:1807
msgid "Slot Array Parameters"
msgstr "Parametri Arie sloturi"

#: flatcamEditors/FlatCAMExcEditor.py:1809
msgid "Parameters for the array of slots (linear or circular array)"
msgstr "Parametri pentru Aria de sloturi (arie circulară sau liniară)"

#: flatcamEditors/FlatCAMExcEditor.py:1818
msgid ""
"Select the type of slot array to create.\n"
"It can be Linear X(Y) or Circular"
msgstr ""
"Selectați tipul de slot pentru creare.\n"
"Poate fi liniar X (Y) sau circular"

#: flatcamEditors/FlatCAMExcEditor.py:1830 flatcamGUI/PreferencesUI.py:2501
msgid "Nr of slots"
msgstr "Nr de sloturi"

#: flatcamEditors/FlatCAMExcEditor.py:1831 flatcamGUI/PreferencesUI.py:2503
msgid "Specify how many slots to be in the array."
msgstr "Specificați câte sloturi trebuie să fie în arie."

#: flatcamEditors/FlatCAMExcEditor.py:2439
msgid ""
"Tool already in the original or actual tool list.\n"
"Save and reedit Excellon if you need to add this tool. "
msgstr ""
"Unealta este deja in lista originală sau actuală de unelte.\n"
"Salvează și reeditează obiectul Excellon dacă ai nevoie să adaugi această "
"unealtă. "

#: flatcamEditors/FlatCAMExcEditor.py:2448 flatcamGUI/FlatCAMGUI.py:3315
msgid "Added new tool with dia"
msgstr "O nouă unealtă este adăugată cu diametrul"

#: flatcamEditors/FlatCAMExcEditor.py:2482
msgid "Select a tool in Tool Table"
msgstr "Selectează o unealtă in Tabela de Unelte"

#: flatcamEditors/FlatCAMExcEditor.py:2515
msgid "Deleted tool with diameter"
msgstr "Unealtă ștearsă cu diametrul"

#: flatcamEditors/FlatCAMExcEditor.py:2665
msgid "Done. Tool edit completed."
msgstr "Terminat. Editarea uneltei a fost finalizată."

#: flatcamEditors/FlatCAMExcEditor.py:3211
msgid "There are no Tools definitions in the file. Aborting Excellon creation."
msgstr ""
"Nu exista definitii de unelte in fişier. Se anulează crearea de obiect "
"Excellon."

#: flatcamEditors/FlatCAMExcEditor.py:3215
msgid "An internal error has ocurred. See Shell.\n"
msgstr ""
"A apărut o eroare internă. Verifică in TCL Shell pt mai multe detalii.\n"

#: flatcamEditors/FlatCAMExcEditor.py:3221
msgid "Creating Excellon."
msgstr "In curs de creere Excellon."

#: flatcamEditors/FlatCAMExcEditor.py:3235
msgid "Excellon editing finished."
msgstr "Editarea Excellon a fost terminată."

#: flatcamEditors/FlatCAMExcEditor.py:3253
msgid "Cancelled. There is no Tool/Drill selected"
msgstr "Anulat. Nu este selectată nici-o unealtă sau op. de găurire"

#: flatcamEditors/FlatCAMExcEditor.py:3859
msgid "Done. Drill(s) deleted."
msgstr "Executat. Operatiile de găurire șterse."

#: flatcamEditors/FlatCAMExcEditor.py:3931
#: flatcamEditors/FlatCAMExcEditor.py:3941
#: flatcamEditors/FlatCAMGrbEditor.py:4654
msgid "Click on the circular array Center position"
msgstr "Click pe punctul de Centru al ariei circulare"

#: flatcamEditors/FlatCAMGeoEditor.py:83
msgid "Buffer distance:"
msgstr "Distanta pt bufer:"

#: flatcamEditors/FlatCAMGeoEditor.py:84
msgid "Buffer corner:"
msgstr "Coltul pt bufer:"

#: flatcamEditors/FlatCAMGeoEditor.py:86
msgid ""
"There are 3 types of corners:\n"
" - 'Round': the corner is rounded for exterior buffer.\n"
" - 'Square:' the corner is met in a sharp angle for exterior buffer.\n"
" - 'Beveled:' the corner is a line that directly connects the features "
"meeting in the corner"
msgstr ""
"Sunt disponibile 3 tipuri de colțuri:\n"
" - 'Rotund': coltul este rotunjit in cazul buferului exterior.\n"
" - 'Patrat:' colțurile formează unghi de 90 grade pt buferul exterior\n"
" - 'Beveled:' coltul este inlocuit cu o linie care uneste capetele liniilor "
"care formează coltul"

#: flatcamEditors/FlatCAMGeoEditor.py:92
#: flatcamEditors/FlatCAMGrbEditor.py:2522
msgid "Round"
msgstr "Rotund"

#: flatcamEditors/FlatCAMGeoEditor.py:93
#: flatcamEditors/FlatCAMGrbEditor.py:2523
msgid "Square"
msgstr "Patrat"

#: flatcamEditors/FlatCAMGeoEditor.py:94
#: flatcamEditors/FlatCAMGrbEditor.py:2524
msgid "Beveled"
msgstr "Beveled"

#: flatcamEditors/FlatCAMGeoEditor.py:101
msgid "Buffer Interior"
msgstr "Bufer interior"

#: flatcamEditors/FlatCAMGeoEditor.py:103
msgid "Buffer Exterior"
msgstr "Bufer Exterior"

#: flatcamEditors/FlatCAMGeoEditor.py:109
msgid "Full Buffer"
msgstr "Bufer complet"

#: flatcamEditors/FlatCAMGeoEditor.py:130
#: flatcamEditors/FlatCAMGeoEditor.py:2722 flatcamGUI/FlatCAMGUI.py:1500
#: flatcamGUI/PreferencesUI.py:1577
msgid "Buffer Tool"
msgstr "Unealta Bufer"

#: flatcamEditors/FlatCAMGeoEditor.py:142
#: flatcamEditors/FlatCAMGeoEditor.py:159
#: flatcamEditors/FlatCAMGeoEditor.py:176
#: flatcamEditors/FlatCAMGeoEditor.py:2742
#: flatcamEditors/FlatCAMGeoEditor.py:2772
#: flatcamEditors/FlatCAMGeoEditor.py:2802
#: flatcamEditors/FlatCAMGrbEditor.py:4707
msgid "Buffer distance value is missing or wrong format. Add it and retry."
msgstr ""
"Valoarea distantei bufer lipseste sau este intr-un format gresit. Adaugă din "
"nou și reîncearcă."

#: flatcamEditors/FlatCAMGeoEditor.py:346
msgid "Text Tool"
msgstr "Unealta Text"

#: flatcamEditors/FlatCAMGeoEditor.py:404 flatcamGUI/FlatCAMGUI.py:839
msgid "Tool"
msgstr "Unealta"

#: flatcamEditors/FlatCAMGeoEditor.py:435 flatcamGUI/ObjectUI.py:264
#: flatcamGUI/PreferencesUI.py:1117 flatcamGUI/PreferencesUI.py:2614
#: flatcamGUI/PreferencesUI.py:3562 flatcamGUI/PreferencesUI.py:3722
#: flatcamTools/ToolCutOut.py:91
msgid "Tool dia"
msgstr "Dia unealtă"

#: flatcamEditors/FlatCAMGeoEditor.py:437 flatcamGUI/PreferencesUI.py:3724
msgid ""
"Diameter of the tool to\n"
"be used in the operation."
msgstr ""
"Diametrul uneltei care este utilizata in operaţie. \n"
"Este și lăţimea de tăiere pentru uneltele cilindrice."

#: flatcamEditors/FlatCAMGeoEditor.py:446 flatcamGUI/PreferencesUI.py:3404
#: flatcamGUI/PreferencesUI.py:3753 flatcamTools/ToolNonCopperClear.py:283
#: flatcamTools/ToolPaint.py:205
msgid "Overlap Rate"
msgstr "Rată suprapunere"

#: flatcamEditors/FlatCAMGeoEditor.py:448 flatcamGUI/PreferencesUI.py:3755
#: flatcamTools/ToolPaint.py:207
#, python-format
msgid ""
"How much (fraction) of the tool width to overlap each tool pass.\n"
"Example:\n"
"A value here of 0.25 means 25%% from the tool diameter found above.\n"
"\n"
"Adjust the value starting with lower values\n"
"and increasing it if areas that should be painted are still \n"
"not painted.\n"
"Lower values = faster processing, faster execution on PCB.\n"
"Higher values = slow processing and slow execution on CNC\n"
"due of too many paths."
msgstr ""
"Cat de mult (fracţie) din diametrul uneltei să se suprapună la fiecare "
"trecere a uneltei.\n"
"Exemplu:\n"
"O valoare aici de 0.25 inseamna 25%% din diametrul uneltei de mai sus.\n"
"\n"
"Ajustează valoarea incepand de la valori mici și pe urma creste daca ariile "
"care ar trebui\n"
" >pictate< inca nu sunt procesate.\n"
"Valori scazute = procesare rapida,execuţie rapida a PCB-ului.\n"
"Valori mari= procesare lenta cat și o execuţie la fel de lenta a PCB-ului,\n"
"datorita numărului mai mare de treceri-tăiere."

#: flatcamEditors/FlatCAMGeoEditor.py:464 flatcamGUI/PreferencesUI.py:3425
#: flatcamGUI/PreferencesUI.py:3586 flatcamGUI/PreferencesUI.py:3774
#: flatcamTools/ToolNonCopperClear.py:303 flatcamTools/ToolPaint.py:226
msgid "Margin"
msgstr "Margine"

#: flatcamEditors/FlatCAMGeoEditor.py:466 flatcamGUI/PreferencesUI.py:3776
#: flatcamTools/ToolPaint.py:228
msgid ""
"Distance by which to avoid\n"
"the edges of the polygon to\n"
"be painted."
msgstr ""
"Distanta fata de marginile\n"
"poligonului care trebuie\n"
"să fie >pictat<."

#: flatcamEditors/FlatCAMGeoEditor.py:475 flatcamGUI/PreferencesUI.py:3434
#: flatcamGUI/PreferencesUI.py:3785 flatcamTools/ToolNonCopperClear.py:312
#: flatcamTools/ToolPaint.py:237
msgid "Method"
msgstr "Metodă"

#: flatcamEditors/FlatCAMGeoEditor.py:477
msgid ""
"Algorithm to paint the polygon:<BR><B>Standard</B>: Fixed step inwards."
"<BR><B>Seed-based</B>: Outwards from seed."
msgstr ""
"Algoritm pentru a picta poligonul<BR><B>Standard</B>: Pas fix spre interior."
"<BR><B>Samanta</B>: Spre exterior pornind de la un punct-samanta."

#: flatcamEditors/FlatCAMGeoEditor.py:483 flatcamGUI/PreferencesUI.py:3443
#: flatcamGUI/PreferencesUI.py:3794 flatcamTools/ToolNonCopperClear.py:321
#: flatcamTools/ToolPaint.py:246
msgid "Standard"
msgstr "Standard"

#: flatcamEditors/FlatCAMGeoEditor.py:484 flatcamGUI/PreferencesUI.py:3444
#: flatcamGUI/PreferencesUI.py:3795 flatcamTools/ToolNonCopperClear.py:322
#: flatcamTools/ToolPaint.py:247
msgid "Seed-based"
msgstr "Punct-samanta"

#: flatcamEditors/FlatCAMGeoEditor.py:485 flatcamGUI/PreferencesUI.py:3445
#: flatcamGUI/PreferencesUI.py:3796 flatcamTools/ToolNonCopperClear.py:323
#: flatcamTools/ToolPaint.py:248
msgid "Straight lines"
msgstr "Linii drepte"

#: flatcamEditors/FlatCAMGeoEditor.py:490
msgid "Connect:"
msgstr "Conectează:"

#: flatcamEditors/FlatCAMGeoEditor.py:492 flatcamGUI/PreferencesUI.py:3452
#: flatcamGUI/PreferencesUI.py:3803 flatcamTools/ToolNonCopperClear.py:330
#: flatcamTools/ToolPaint.py:255
msgid ""
"Draw lines between resulting\n"
"segments to minimize tool lifts."
msgstr ""
"Desenează linii între segmentele\n"
"rezultate pentru a minimiza miscarile\n"
"de ridicare a uneltei."

#: flatcamEditors/FlatCAMGeoEditor.py:499
msgid "Contour:"
msgstr "Contur:"

#: flatcamEditors/FlatCAMGeoEditor.py:501 flatcamGUI/PreferencesUI.py:3462
#: flatcamGUI/PreferencesUI.py:3813 flatcamTools/ToolNonCopperClear.py:339
#: flatcamTools/ToolPaint.py:264
msgid ""
"Cut around the perimeter of the polygon\n"
"to trim rough edges."
msgstr ""
"Taie de-a lungul perimetrului poligonului\n"
"pentru a elimina bavurile."

#: flatcamEditors/FlatCAMGeoEditor.py:512 flatcamGUI/FlatCAMGUI.py:1744
msgid "Paint"
msgstr "Pictează"

#: flatcamEditors/FlatCAMGeoEditor.py:530 flatcamGUI/FlatCAMGUI.py:674
#: flatcamGUI/FlatCAMGUI.py:2112 flatcamGUI/ObjectUI.py:1365
#: flatcamTools/ToolPaint.py:25 flatcamTools/ToolPaint.py:462
msgid "Paint Tool"
msgstr "Unealta Paint"

#: flatcamEditors/FlatCAMGeoEditor.py:567
msgid "Paint cancelled. No shape selected."
msgstr "Operaţie Paint anulată. Nici-o forma selectată."

#: flatcamEditors/FlatCAMGeoEditor.py:579 flatcamTools/ToolCutOut.py:392
#: flatcamTools/ToolCutOut.py:590 flatcamTools/ToolCutOut.py:760
#: flatcamTools/ToolCutOut.py:862 flatcamTools/ToolDblSided.py:367
msgid "Tool diameter value is missing or wrong format. Add it and retry."
msgstr ""
"Diametrul uneltei lipseste sau este intr-un format incompatibil. Adaugă-l și "
"reîncearcă."

#: flatcamEditors/FlatCAMGeoEditor.py:590
msgid "Overlap value is missing or wrong format. Add it and retry."
msgstr ""
"Valoarea de suprapunere a uneltei lipseste sau este intr-un format "
"incompatibil. Adaugă-o și reîncearcă."

#: flatcamEditors/FlatCAMGeoEditor.py:602
msgid "Margin distance value is missing or wrong format. Add it and retry."
msgstr ""
"Valoarea de margine lipseste sau este intr-un format incompatibil. Adaugă-o "
"și reîncearcă."

#: flatcamEditors/FlatCAMGeoEditor.py:610
#: flatcamEditors/FlatCAMGeoEditor.py:2748
#: flatcamEditors/FlatCAMGeoEditor.py:2778
#: flatcamEditors/FlatCAMGeoEditor.py:2808 flatcamGUI/PreferencesUI.py:2610
#: flatcamTools/ToolProperties.py:113 flatcamTools/ToolProperties.py:139
msgid "Tools"
msgstr "Unelte"

#: flatcamEditors/FlatCAMGeoEditor.py:621
#: flatcamEditors/FlatCAMGeoEditor.py:995
#: flatcamEditors/FlatCAMGrbEditor.py:4890
#: flatcamEditors/FlatCAMGrbEditor.py:5275 flatcamGUI/FlatCAMGUI.py:685
#: flatcamGUI/FlatCAMGUI.py:2125 flatcamTools/ToolTransform.py:403
msgid "Transform Tool"
msgstr "Unealta Transformare"

#: flatcamEditors/FlatCAMGeoEditor.py:622
#: flatcamEditors/FlatCAMGeoEditor.py:684
#: flatcamEditors/FlatCAMGrbEditor.py:4891
#: flatcamEditors/FlatCAMGrbEditor.py:4953 flatcamTools/ToolTransform.py:24
#: flatcamTools/ToolTransform.py:82
msgid "Rotate"
msgstr "Rotaţie"

#: flatcamEditors/FlatCAMGeoEditor.py:623
#: flatcamEditors/FlatCAMGrbEditor.py:4892 flatcamTools/ToolTransform.py:25
msgid "Skew/Shear"
msgstr "Deformare"

#: flatcamEditors/FlatCAMGeoEditor.py:624
#: flatcamEditors/FlatCAMGrbEditor.py:2569
#: flatcamEditors/FlatCAMGrbEditor.py:4893 flatcamGUI/FlatCAMGUI.py:752
#: flatcamGUI/FlatCAMGUI.py:1694 flatcamGUI/FlatCAMGUI.py:1771
#: flatcamGUI/FlatCAMGUI.py:2194 flatcamGUI/ObjectUI.py:79
#: flatcamGUI/ObjectUI.py:100 flatcamTools/ToolTransform.py:26
msgid "Scale"
msgstr "Scalare"

#: flatcamEditors/FlatCAMGeoEditor.py:625
#: flatcamEditors/FlatCAMGrbEditor.py:4894 flatcamTools/ToolTransform.py:27
msgid "Mirror (Flip)"
msgstr "Oglindire"

#: flatcamEditors/FlatCAMGeoEditor.py:626
#: flatcamEditors/FlatCAMGrbEditor.py:4895 flatcamGUI/ObjectUI.py:108
#: flatcamGUI/ObjectUI.py:127 flatcamGUI/ObjectUI.py:957
#: flatcamGUI/ObjectUI.py:1522 flatcamGUI/PreferencesUI.py:3485
#: flatcamTools/ToolNonCopperClear.py:361 flatcamTools/ToolTransform.py:28
msgid "Offset"
msgstr "Ofset"

#: flatcamEditors/FlatCAMGeoEditor.py:638
#: flatcamEditors/FlatCAMGrbEditor.py:4907 flatcamGUI/FlatCAMGUI.py:647
#: flatcamGUI/FlatCAMGUI.py:2085
msgid "Editor"
msgstr "Editor"

#: flatcamEditors/FlatCAMGeoEditor.py:670
#: flatcamEditors/FlatCAMGrbEditor.py:4939
msgid "Angle:"
msgstr "Unghi:"

#: flatcamEditors/FlatCAMGeoEditor.py:672
#: flatcamEditors/FlatCAMGrbEditor.py:4941 flatcamGUI/PreferencesUI.py:4155
#: flatcamTools/ToolTransform.py:70
msgid ""
"Angle for Rotation action, in degrees.\n"
"Float number between -360 and 359.\n"
"Positive numbers for CW motion.\n"
"Negative numbers for CCW motion."
msgstr ""
"Unghiul pentru Rotaţie, in grade. Număr Real cu valori între -360 și  359.\n"
"Numerele pozitive inseamna o mișcare in sens ace ceasornic.\n"
"Numerele negative inseamna o mișcare in sens invers ace ceasornic."

#: flatcamEditors/FlatCAMGeoEditor.py:686
#: flatcamEditors/FlatCAMGrbEditor.py:4955
msgid ""
"Rotate the selected shape(s).\n"
"The point of reference is the middle of\n"
"the bounding box for all selected shapes."
msgstr ""
"Roteste formele selectate.\n"
"Punctul de referinţă este mijlocul\n"
"formei înconjurătoare care cuprinde\n"
"toate formele selectate."

#: flatcamEditors/FlatCAMGeoEditor.py:709
#: flatcamEditors/FlatCAMGrbEditor.py:4978
msgid "Angle X:"
msgstr "Unghi X:"

#: flatcamEditors/FlatCAMGeoEditor.py:711
#: flatcamEditors/FlatCAMGeoEditor.py:729
#: flatcamEditors/FlatCAMGrbEditor.py:4980
#: flatcamEditors/FlatCAMGrbEditor.py:4998 flatcamGUI/PreferencesUI.py:4167
#: flatcamGUI/PreferencesUI.py:4177 flatcamTools/ToolTransform.py:109
#: flatcamTools/ToolTransform.py:127
msgid ""
"Angle for Skew action, in degrees.\n"
"Float number between -360 and 359."
msgstr ""
"Valoarea unghiului de Deformare, in grade.\n"
"Ia valori Reale între -360 and 359 grade."

#: flatcamEditors/FlatCAMGeoEditor.py:720
#: flatcamEditors/FlatCAMGrbEditor.py:4989 flatcamTools/ToolTransform.py:118
msgid "Skew X"
msgstr "Deformare X"

#: flatcamEditors/FlatCAMGeoEditor.py:722
#: flatcamEditors/FlatCAMGeoEditor.py:740
#: flatcamEditors/FlatCAMGrbEditor.py:4991
#: flatcamEditors/FlatCAMGrbEditor.py:5009
msgid ""
"Skew/shear the selected shape(s).\n"
"The point of reference is the middle of\n"
"the bounding box for all selected shapes."
msgstr ""
"Deformează formele selectate.\n"
"Punctul de referinţă este mijlocul\n"
"formei înconjurătoare care cuprinde\n"
"toate formele selectate."

#: flatcamEditors/FlatCAMGeoEditor.py:727
#: flatcamEditors/FlatCAMGrbEditor.py:4996
msgid "Angle Y:"
msgstr "Unghi Y:"

#: flatcamEditors/FlatCAMGeoEditor.py:738
#: flatcamEditors/FlatCAMGrbEditor.py:5007 flatcamTools/ToolTransform.py:136
msgid "Skew Y"
msgstr "Deformare Y"

#: flatcamEditors/FlatCAMGeoEditor.py:766
#: flatcamEditors/FlatCAMGrbEditor.py:5035
msgid "Factor X:"
msgstr "Factor X:"

#: flatcamEditors/FlatCAMGeoEditor.py:768
#: flatcamEditors/FlatCAMGrbEditor.py:5037
msgid "Factor for Scale action over X axis."
msgstr "Factor pentru scalarea pe axa X."

#: flatcamEditors/FlatCAMGeoEditor.py:776
#: flatcamEditors/FlatCAMGrbEditor.py:5045 flatcamTools/ToolTransform.py:174
msgid "Scale X"
msgstr "Scalează X"

#: flatcamEditors/FlatCAMGeoEditor.py:778
#: flatcamEditors/FlatCAMGeoEditor.py:795
#: flatcamEditors/FlatCAMGrbEditor.py:5047
#: flatcamEditors/FlatCAMGrbEditor.py:5064
msgid ""
"Scale the selected shape(s).\n"
"The point of reference depends on \n"
"the Scale reference checkbox state."
msgstr ""
"Scalează formele selectate.\n"
"Punctul de referinţă depinde de  \n"
"starea checkbox-ului >Referința scalare<."

#: flatcamEditors/FlatCAMGeoEditor.py:783
#: flatcamEditors/FlatCAMGrbEditor.py:5052
msgid "Factor Y:"
msgstr "Factor Y:"

#: flatcamEditors/FlatCAMGeoEditor.py:785
#: flatcamEditors/FlatCAMGrbEditor.py:5054
msgid "Factor for Scale action over Y axis."
msgstr "Factor pentru scalarea pe axa Y."

#: flatcamEditors/FlatCAMGeoEditor.py:793
#: flatcamEditors/FlatCAMGrbEditor.py:5062 flatcamTools/ToolTransform.py:191
msgid "Scale Y"
msgstr "Scalează Y"

#: flatcamEditors/FlatCAMGeoEditor.py:802
#: flatcamEditors/FlatCAMGrbEditor.py:5071 flatcamGUI/PreferencesUI.py:4202
#: flatcamTools/ToolTransform.py:200
msgid "Link"
msgstr "Legatura"

#: flatcamEditors/FlatCAMGeoEditor.py:804
#: flatcamEditors/FlatCAMGrbEditor.py:5073
msgid ""
"Scale the selected shape(s)\n"
"using the Scale Factor X for both axis."
msgstr ""
"Scalează formele selectate\n"
"folsoind factorul: Factor X pentru ambele axe."

#: flatcamEditors/FlatCAMGeoEditor.py:810
#: flatcamEditors/FlatCAMGrbEditor.py:5079 flatcamGUI/PreferencesUI.py:4210
#: flatcamTools/ToolTransform.py:209
msgid "Scale Reference"
msgstr "Referința scalare"

#: flatcamEditors/FlatCAMGeoEditor.py:812
#: flatcamEditors/FlatCAMGrbEditor.py:5081
msgid ""
"Scale the selected shape(s)\n"
"using the origin reference when checked,\n"
"and the center of the biggest bounding box\n"
"of the selected shapes when unchecked."
msgstr ""
"Scalează formele selectate.\n"
"Punctul de referinţă este mijlocul\n"
"formei înconjurătoare care cuprinde\n"
"toate formele selectate când nu este\n"
"bifat și este originea când este bifat."

#: flatcamEditors/FlatCAMGeoEditor.py:840
#: flatcamEditors/FlatCAMGrbEditor.py:5110
msgid "Value X:"
msgstr "Valoare X:"

#: flatcamEditors/FlatCAMGeoEditor.py:842
#: flatcamEditors/FlatCAMGrbEditor.py:5112
msgid "Value for Offset action on X axis."
msgstr "Valoare pentru deplasarea pe axa X."

#: flatcamEditors/FlatCAMGeoEditor.py:850
#: flatcamEditors/FlatCAMGrbEditor.py:5120 flatcamTools/ToolTransform.py:249
msgid "Offset X"
msgstr "Ofset pe X"

#: flatcamEditors/FlatCAMGeoEditor.py:852
#: flatcamEditors/FlatCAMGeoEditor.py:870
#: flatcamEditors/FlatCAMGrbEditor.py:5122
#: flatcamEditors/FlatCAMGrbEditor.py:5140
msgid ""
"Offset the selected shape(s).\n"
"The point of reference is the middle of\n"
"the bounding box for all selected shapes.\n"
msgstr ""
"Deplasează formele selectate\n"
"Punctul de referinţă este mijlocul\n"
"formei înconjurătoare care cuprinde\n"
"toate formele selectate.\n"

#: flatcamEditors/FlatCAMGeoEditor.py:858
#: flatcamEditors/FlatCAMGrbEditor.py:5128
msgid "Value Y:"
msgstr "Valoare Y:"

#: flatcamEditors/FlatCAMGeoEditor.py:860
#: flatcamEditors/FlatCAMGrbEditor.py:5130
msgid "Value for Offset action on Y axis."
msgstr "Valoare pentru deplasarea pe axa Y."

#: flatcamEditors/FlatCAMGeoEditor.py:868
#: flatcamEditors/FlatCAMGrbEditor.py:5138 flatcamTools/ToolTransform.py:266
msgid "Offset Y"
msgstr "Ofset pe Y"

#: flatcamEditors/FlatCAMGeoEditor.py:899
#: flatcamEditors/FlatCAMGrbEditor.py:5169 flatcamTools/ToolTransform.py:296
msgid "Flip on X"
msgstr "Oglindește pe X"

#: flatcamEditors/FlatCAMGeoEditor.py:901
#: flatcamEditors/FlatCAMGeoEditor.py:909
#: flatcamEditors/FlatCAMGrbEditor.py:5171
#: flatcamEditors/FlatCAMGrbEditor.py:5179
msgid ""
"Flip the selected shape(s) over the X axis.\n"
"Does not create a new shape."
msgstr ""
"Oglindește formele selectate peste axa X\n"
"Nu crează noi forme."

#: flatcamEditors/FlatCAMGeoEditor.py:907
#: flatcamEditors/FlatCAMGrbEditor.py:5177 flatcamTools/ToolTransform.py:304
msgid "Flip on Y"
msgstr "Oglindește pe Y"

#: flatcamEditors/FlatCAMGeoEditor.py:916
#: flatcamEditors/FlatCAMGrbEditor.py:5186
msgid "Ref Pt"
msgstr "Pt ref"

#: flatcamEditors/FlatCAMGeoEditor.py:918
#: flatcamEditors/FlatCAMGrbEditor.py:5188
msgid ""
"Flip the selected shape(s)\n"
"around the point in Point Entry Field.\n"
"\n"
"The point coordinates can be captured by\n"
"left click on canvas together with pressing\n"
"SHIFT key. \n"
"Then click Add button to insert coordinates.\n"
"Or enter the coords in format (x, y) in the\n"
"Point Entry field and click Flip on X(Y)"
msgstr ""
"Oglindește formele selectate\n"
"in jurul punctului din câmpul >Punct<\n"
"\n"
"Coordonatele punctului pot fi obtinute\n"
"prin click pe canvas in timp ce se tine apasata\n"
"tasta SHIFT.\n"
"Apoi click pe butonul >Adaugă< pentru a insera\n"
"coordonatele.\n"
"Alternativ se pot introduce manual in formatul (x, y). \n"
"La final click pe >Oglindește pe X(Y)<."

#: flatcamEditors/FlatCAMGeoEditor.py:930
#: flatcamEditors/FlatCAMGrbEditor.py:5200
msgid "Point:"
msgstr "Punct:"

#: flatcamEditors/FlatCAMGeoEditor.py:932
#: flatcamEditors/FlatCAMGrbEditor.py:5202
msgid ""
"Coordinates in format (x, y) used as reference for mirroring.\n"
"The 'x' in (x, y) will be used when using Flip on X and\n"
"the 'y' in (x, y) will be used when using Flip on Y."
msgstr ""
"Coordonatele in format (x, y) folosite pentru oglindire.\n"
"Valoarea 'x' in (x, y) va fi folosita când se face oglindire pe X\n"
"și valoarea 'y' in (x, y) va fi folosita când se face oglindire pe Y."

#: flatcamEditors/FlatCAMGeoEditor.py:944
#: flatcamEditors/FlatCAMGrbEditor.py:5214 flatcamTools/ToolTransform.py:340
msgid ""
"The point coordinates can be captured by\n"
"left click on canvas together with pressing\n"
"SHIFT key. Then click Add button to insert."
msgstr ""
"Coordonatele punctului se pot obtine\n"
"prin click pe canvas in timp ce se tine apasata\n"
"tasta SHIFT.\n"
"La final, apasa butonul >Adaugă< pt a le insera."

#: flatcamEditors/FlatCAMGeoEditor.py:1060
#: flatcamEditors/FlatCAMGrbEditor.py:5340
msgid "Transformation cancelled. No shape selected."
msgstr "Transformare anulată. Nici-o formă nu este selectată."

#: flatcamEditors/FlatCAMGeoEditor.py:1269
#: flatcamEditors/FlatCAMGrbEditor.py:5586
msgid "No shape selected. Please Select a shape to rotate!"
msgstr ""
"Nici-o forma nu este selectată. Selectează o forma pentru a putea face "
"Rotaţie!"

#: flatcamEditors/FlatCAMGeoEditor.py:1272
#: flatcamEditors/FlatCAMGrbEditor.py:5589 flatcamTools/ToolTransform.py:646
msgid "Appying Rotate"
msgstr "Execuţie Rotaţie"

#: flatcamEditors/FlatCAMGeoEditor.py:1301
#: flatcamEditors/FlatCAMGrbEditor.py:5623
msgid "Done. Rotate completed."
msgstr "Executat. Rotaţie finalizată."

#: flatcamEditors/FlatCAMGeoEditor.py:1307
msgid "Rotation action was not executed"
msgstr "Actiunea de rotatie nu a fost efectuată"

#: flatcamEditors/FlatCAMGeoEditor.py:1319
#: flatcamEditors/FlatCAMGrbEditor.py:5644
msgid "No shape selected. Please Select a shape to flip!"
msgstr ""
"Nici-o formă nu este selectată. Selectează o formă pentru a putea face "
"Oglindire!"

#: flatcamEditors/FlatCAMGeoEditor.py:1322
#: flatcamEditors/FlatCAMGrbEditor.py:5647 flatcamTools/ToolTransform.py:699
msgid "Applying Flip"
msgstr "Execuţie Oglindire"

#: flatcamEditors/FlatCAMGeoEditor.py:1353
#: flatcamEditors/FlatCAMGrbEditor.py:5687 flatcamTools/ToolTransform.py:742
msgid "Flip on the Y axis done"
msgstr "Oglindire pe axa Y executată"

#: flatcamEditors/FlatCAMGeoEditor.py:1357
#: flatcamEditors/FlatCAMGrbEditor.py:5696 flatcamTools/ToolTransform.py:752
msgid "Flip on the X axis done"
msgstr "Oglindire pe axa X executată"

#: flatcamEditors/FlatCAMGeoEditor.py:1368
msgid "Flip action was not executed"
msgstr "Actiunea de oglindire nu a fost efectuată"

#: flatcamEditors/FlatCAMGeoEditor.py:1378
#: flatcamEditors/FlatCAMGrbEditor.py:5718
msgid "No shape selected. Please Select a shape to shear/skew!"
msgstr ""
"Nici-o formă nu este selectată. Selectează o formă pentru a putea face "
"Deformare!"

#: flatcamEditors/FlatCAMGeoEditor.py:1381
#: flatcamEditors/FlatCAMGrbEditor.py:5721 flatcamTools/ToolTransform.py:772
msgid "Applying Skew"
msgstr "Execuţie Deformare"

#: flatcamEditors/FlatCAMGeoEditor.py:1407
#: flatcamEditors/FlatCAMGrbEditor.py:5758
msgid "Skew on the X axis done"
msgstr "Oglindire pe axa X executată"

#: flatcamEditors/FlatCAMGeoEditor.py:1410
#: flatcamEditors/FlatCAMGrbEditor.py:5761
msgid "Skew on the Y axis done"
msgstr "Oglindire pe axa Y executată"

#: flatcamEditors/FlatCAMGeoEditor.py:1415
msgid "Skew action was not executed"
msgstr "Actiunea de deformare nu a fost efectuată"

#: flatcamEditors/FlatCAMGeoEditor.py:1427
#: flatcamEditors/FlatCAMGrbEditor.py:5786
msgid "No shape selected. Please Select a shape to scale!"
msgstr ""
"Nici-o formă nu este selectată. Selectează o formă pentru a putea face "
"Scalare!"

#: flatcamEditors/FlatCAMGeoEditor.py:1430
#: flatcamEditors/FlatCAMGrbEditor.py:5789 flatcamTools/ToolTransform.py:824
msgid "Applying Scale"
msgstr "Execuţie Scalare"

#: flatcamEditors/FlatCAMGeoEditor.py:1465
#: flatcamEditors/FlatCAMGrbEditor.py:5829
msgid "Scale on the X axis done"
msgstr "Scalarea pe axa X executată"

#: flatcamEditors/FlatCAMGeoEditor.py:1468
#: flatcamEditors/FlatCAMGrbEditor.py:5832
msgid "Scale on the Y axis done"
msgstr "Scalarea pe axa Y executată"

#: flatcamEditors/FlatCAMGeoEditor.py:1472
msgid "Scale action was not executed"
msgstr "Scalarea nu a fost efectuată"

#: flatcamEditors/FlatCAMGeoEditor.py:1482
#: flatcamEditors/FlatCAMGrbEditor.py:5850
msgid "No shape selected. Please Select a shape to offset!"
msgstr ""
"Nici-o formă nu este selectată. Selectează o formă pentru a putea face Ofset!"

#: flatcamEditors/FlatCAMGeoEditor.py:1485
#: flatcamEditors/FlatCAMGrbEditor.py:5853 flatcamTools/ToolTransform.py:879
msgid "Applying Offset"
msgstr "Execuţie Ofset"

#: flatcamEditors/FlatCAMGeoEditor.py:1498
#: flatcamEditors/FlatCAMGrbEditor.py:5877
msgid "Offset on the X axis done"
msgstr "Ofset pe axa X efectuat"

#: flatcamEditors/FlatCAMGeoEditor.py:1501
#: flatcamEditors/FlatCAMGrbEditor.py:5880
msgid "Offset on the Y axis done"
msgstr "Ofset pe axa Y efectuat"

#: flatcamEditors/FlatCAMGeoEditor.py:1506
msgid "Offset action was not executed"
msgstr "Actiuena de Ofset nu a fost efectuată"

#: flatcamEditors/FlatCAMGeoEditor.py:1510
#: flatcamEditors/FlatCAMGrbEditor.py:5889
msgid "Rotate ..."
msgstr "Rotaţie ..."

#: flatcamEditors/FlatCAMGeoEditor.py:1511
#: flatcamEditors/FlatCAMGeoEditor.py:1566
#: flatcamEditors/FlatCAMGeoEditor.py:1583
#: flatcamEditors/FlatCAMGrbEditor.py:5890
#: flatcamEditors/FlatCAMGrbEditor.py:5945
#: flatcamEditors/FlatCAMGrbEditor.py:5962
msgid "Enter an Angle Value (degrees)"
msgstr "Introdu o valoare in grade pt Unghi"

#: flatcamEditors/FlatCAMGeoEditor.py:1520
#: flatcamEditors/FlatCAMGrbEditor.py:5899
msgid "Geometry shape rotate done"
msgstr "Rotatia formei geometrice executată"

#: flatcamEditors/FlatCAMGeoEditor.py:1524
#: flatcamEditors/FlatCAMGrbEditor.py:5903
msgid "Geometry shape rotate cancelled"
msgstr "Rotatia formei geometrice anulată"

#: flatcamEditors/FlatCAMGeoEditor.py:1529
#: flatcamEditors/FlatCAMGrbEditor.py:5908
msgid "Offset on X axis ..."
msgstr "Ofset pe axa X ..."

#: flatcamEditors/FlatCAMGeoEditor.py:1530
#: flatcamEditors/FlatCAMGeoEditor.py:1549
#: flatcamEditors/FlatCAMGrbEditor.py:5909
#: flatcamEditors/FlatCAMGrbEditor.py:5928
msgid "Enter a distance Value"
msgstr "Introdu of valoare pt Distantă"

#: flatcamEditors/FlatCAMGeoEditor.py:1539
#: flatcamEditors/FlatCAMGrbEditor.py:5918
msgid "Geometry shape offset on X axis done"
msgstr "Ofset pe axa X executat"

#: flatcamEditors/FlatCAMGeoEditor.py:1543
#: flatcamEditors/FlatCAMGrbEditor.py:5922
msgid "Geometry shape offset X cancelled"
msgstr "Ofset pe axa X anulat"

#: flatcamEditors/FlatCAMGeoEditor.py:1548
#: flatcamEditors/FlatCAMGrbEditor.py:5927
msgid "Offset on Y axis ..."
msgstr "Ofset pe axa Y ..."

#: flatcamEditors/FlatCAMGeoEditor.py:1558
#: flatcamEditors/FlatCAMGrbEditor.py:5937
msgid "Geometry shape offset on Y axis done"
msgstr "Ofset pe axa Y executat"

#: flatcamEditors/FlatCAMGeoEditor.py:1562
msgid "Geometry shape offset on Y axis canceled"
msgstr "Ofset pe axa Y anulat"

#: flatcamEditors/FlatCAMGeoEditor.py:1565
#: flatcamEditors/FlatCAMGrbEditor.py:5944
msgid "Skew on X axis ..."
msgstr "Deformare pe axa X ..."

#: flatcamEditors/FlatCAMGeoEditor.py:1575
#: flatcamEditors/FlatCAMGrbEditor.py:5954
msgid "Geometry shape skew on X axis done"
msgstr "Deformarea pe axa X executată"

#: flatcamEditors/FlatCAMGeoEditor.py:1579
msgid "Geometry shape skew on X axis canceled"
msgstr "Deformarea pe axa X anulată"

#: flatcamEditors/FlatCAMGeoEditor.py:1582
#: flatcamEditors/FlatCAMGrbEditor.py:5961
msgid "Skew on Y axis ..."
msgstr "Deformare pe axa Y ..."

#: flatcamEditors/FlatCAMGeoEditor.py:1592
#: flatcamEditors/FlatCAMGrbEditor.py:5971
msgid "Geometry shape skew on Y axis done"
msgstr "Deformarea pe axa Y executată"

#: flatcamEditors/FlatCAMGeoEditor.py:1596
msgid "Geometry shape skew on Y axis canceled"
msgstr "Deformarea pe axa Y anulată"

#: flatcamEditors/FlatCAMGeoEditor.py:1960
#: flatcamEditors/FlatCAMGeoEditor.py:2012
#: flatcamEditors/FlatCAMGrbEditor.py:1396
#: flatcamEditors/FlatCAMGrbEditor.py:1466
msgid "Click on Center point ..."
msgstr "Click pe punctul de Centru ..."

#: flatcamEditors/FlatCAMGeoEditor.py:1967
#: flatcamEditors/FlatCAMGrbEditor.py:1404
msgid "Click on Perimeter point to complete ..."
msgstr "Click pe un punct aflat pe Circumferintă pentru terminare ..."

#: flatcamEditors/FlatCAMGeoEditor.py:1997
msgid "Done. Adding Circle completed."
msgstr "Executat. Adăugarea unei forme Cerc terminată."

#: flatcamEditors/FlatCAMGeoEditor.py:2032
#: flatcamEditors/FlatCAMGrbEditor.py:1498
msgid "Click on Start point ..."
msgstr "Click pe punctul de Start ..."

#: flatcamEditors/FlatCAMGeoEditor.py:2034
#: flatcamEditors/FlatCAMGrbEditor.py:1500
msgid "Click on Point3 ..."
msgstr "Click pe Punctul3 ..."

#: flatcamEditors/FlatCAMGeoEditor.py:2036
#: flatcamEditors/FlatCAMGrbEditor.py:1502
msgid "Click on Stop point ..."
msgstr "Click pe punctulde Stop ..."

#: flatcamEditors/FlatCAMGeoEditor.py:2041
#: flatcamEditors/FlatCAMGrbEditor.py:1507
msgid "Click on Stop point to complete ..."
msgstr "Click pe punctul de Stop pentru terminare ..."

#: flatcamEditors/FlatCAMGeoEditor.py:2043
#: flatcamEditors/FlatCAMGrbEditor.py:1509
msgid "Click on Point2 to complete ..."
msgstr "Click pe Punctul2 pentru terminare ..."

#: flatcamEditors/FlatCAMGeoEditor.py:2045
#: flatcamEditors/FlatCAMGrbEditor.py:1511
msgid "Click on Center point to complete ..."
msgstr "Click pe punctul de Centru pentru terminare ..."

#: flatcamEditors/FlatCAMGeoEditor.py:2057
#, python-format
msgid "Direction: %s"
msgstr "Direcţie: %s"

#: flatcamEditors/FlatCAMGeoEditor.py:2067
#: flatcamEditors/FlatCAMGrbEditor.py:1533
msgid "Mode: Start -> Stop -> Center. Click on Start point ..."
msgstr "Mod: Start -> Stop -> Centru. Click pe punctul de Start ..."

#: flatcamEditors/FlatCAMGeoEditor.py:2070
#: flatcamEditors/FlatCAMGrbEditor.py:1536
msgid "Mode: Point1 -> Point3 -> Point2. Click on Point1 ..."
msgstr "Mod: Point1 -> Point3 -> Point2. Click pe Punctul1 ..."

#: flatcamEditors/FlatCAMGeoEditor.py:2073
#: flatcamEditors/FlatCAMGrbEditor.py:1539
msgid "Mode: Center -> Start -> Stop. Click on Center point ..."
msgstr "Mod: Center -> Start -> Stop. Click pe punctul de Centru ..."

#: flatcamEditors/FlatCAMGeoEditor.py:2212
msgid "Done. Arc completed."
msgstr "Executat. Adăugarea unei forme Arc terminată."

#: flatcamEditors/FlatCAMGeoEditor.py:2231
#: flatcamEditors/FlatCAMGeoEditor.py:2285
#: flatcamEditors/FlatCAMGeoEditor.py:2658
msgid "Click on 1st corner ..."
msgstr "Click pe primul colt ..."

#: flatcamEditors/FlatCAMGeoEditor.py:2237
msgid "Click on opposite corner to complete ..."
msgstr "Click pe punctul opus pentru terminare ..."

#: flatcamEditors/FlatCAMGeoEditor.py:2266
msgid "Done. Rectangle completed."
msgstr "Executat. Adăugare Pătrat terminată."

#: flatcamEditors/FlatCAMGeoEditor.py:2292
msgid "Click on next Point or click right mouse button to complete ..."
msgstr ""
"Click pe punctul următor sau click buton dreapta al mousului pentru "
"terminare ..."

#: flatcamEditors/FlatCAMGeoEditor.py:2321
msgid "Done. Polygon completed."
msgstr "Executat. Adăugarea unei forme Poligon terminată."

#: flatcamEditors/FlatCAMGeoEditor.py:2331
#: flatcamEditors/FlatCAMGeoEditor.py:2377
#: flatcamEditors/FlatCAMGrbEditor.py:1085
#: flatcamEditors/FlatCAMGrbEditor.py:1287
msgid "Backtracked one point ..."
msgstr "Revenit la penultimul Punct ..."

#: flatcamEditors/FlatCAMGeoEditor.py:2359
msgid "Done. Path completed."
msgstr "Executat. Traseu finalizat."

#: flatcamEditors/FlatCAMGeoEditor.py:2477
msgid "MOVE: No shape selected. Select a shape to move"
msgstr ""
"MUTARE: Nici-o formă nu este selectată. Selectează o formă pentru a putea "
"face deplasare"

#: flatcamEditors/FlatCAMGeoEditor.py:2479
#: flatcamEditors/FlatCAMGeoEditor.py:2491
msgid " MOVE: Click on reference point ..."
msgstr " MUTARE: Click pe punctul de referinţă ..."

#: flatcamEditors/FlatCAMGeoEditor.py:2482
msgid " Click on destination point ..."
msgstr " Click pe punctul de Destinaţie ..."

#: flatcamEditors/FlatCAMGeoEditor.py:2517
msgid "Done. Geometry(s) Move completed."
msgstr "Executat. Mutarea Geometriilor terminată."

#: flatcamEditors/FlatCAMGeoEditor.py:2638
msgid "Done. Geometry(s) Copy completed."
msgstr "Executat. Copierea Geometriilor terminată."

#: flatcamEditors/FlatCAMGeoEditor.py:2675
msgid ""
"Font not supported. Only Regular, Bold, Italic and BoldItalic are supported. "
"Error"
msgstr ""
"Fontul nu este compatibil. Doar cele tip: Regular, Bold, Italic și "
"BoldItalic sunt acceptate. Eroarea"

#: flatcamEditors/FlatCAMGeoEditor.py:2683
msgid "No text to add."
msgstr "Niciun text de adăugat."

#: flatcamEditors/FlatCAMGeoEditor.py:2690
msgid " Done. Adding Text completed."
msgstr " Executat. Adăugarea de Text terminată."

#: flatcamEditors/FlatCAMGeoEditor.py:2718
msgid "Create buffer geometry ..."
msgstr "Crează o geometrie de tipe Bufer ..."

#: flatcamEditors/FlatCAMGeoEditor.py:2730
#: flatcamEditors/FlatCAMGeoEditor.py:2760
#: flatcamEditors/FlatCAMGeoEditor.py:2790
msgid "Buffer cancelled. No shape selected."
msgstr ""
"Crearea de geometrie Bufer anulată. Nici-o forma geometrică nu este "
"selectată."

#: flatcamEditors/FlatCAMGeoEditor.py:2755
#: flatcamEditors/FlatCAMGrbEditor.py:4752
msgid "Done. Buffer Tool completed."
msgstr "Executat. Unealta Bufer terminată."

#: flatcamEditors/FlatCAMGeoEditor.py:2785
msgid "Done. Buffer Int Tool completed."
msgstr "Executat. Unealta Bufer Intern terminată."

#: flatcamEditors/FlatCAMGeoEditor.py:2815
msgid "Done. Buffer Ext Tool completed."
msgstr "Executat. Unealta Bufer Extern terminată."

#: flatcamEditors/FlatCAMGeoEditor.py:2850
#: flatcamEditors/FlatCAMGrbEditor.py:2068
msgid "Select a shape to act as deletion area ..."
msgstr "Selectează o formă geometrică ca formă de stergere ..."

#: flatcamEditors/FlatCAMGeoEditor.py:2852
#: flatcamEditors/FlatCAMGeoEditor.py:2871
#: flatcamEditors/FlatCAMGeoEditor.py:2877
#: flatcamEditors/FlatCAMGrbEditor.py:2070
msgid "Click to pick-up the erase shape..."
msgstr "Click pentru a activa forma de stergere..."

#: flatcamEditors/FlatCAMGeoEditor.py:2881
#: flatcamEditors/FlatCAMGrbEditor.py:2127
msgid "Click to erase ..."
msgstr "Click pt a sterge ..."

#: flatcamEditors/FlatCAMGeoEditor.py:2911
#: flatcamEditors/FlatCAMGrbEditor.py:2161
msgid "Done. Eraser tool action completed."
msgstr "Executat. Unealta Stergere s-a terminat."

#: flatcamEditors/FlatCAMGeoEditor.py:2954
msgid "Create Paint geometry ..."
msgstr "Crează o geometrie Paint ..."

#: flatcamEditors/FlatCAMGeoEditor.py:2968
#: flatcamEditors/FlatCAMGrbEditor.py:2312
msgid "Shape transformations ..."
msgstr "Transformări de forme geometrice ..."

#: flatcamEditors/FlatCAMGeoEditor.py:3584
msgid "Editing MultiGeo Geometry, tool"
msgstr "Se editează Geometrie tip MultiGeo. unealta"

#: flatcamEditors/FlatCAMGeoEditor.py:3586
msgid "with diameter"
msgstr "cu diametrul"

#: flatcamEditors/FlatCAMGeoEditor.py:3979
msgid "Copy cancelled. No shape selected."
msgstr "Copiere anulată. Nici-o forma geometrică nu este selectată."

#: flatcamEditors/FlatCAMGeoEditor.py:3986 flatcamGUI/FlatCAMGUI.py:3027
#: flatcamGUI/FlatCAMGUI.py:3074 flatcamGUI/FlatCAMGUI.py:3093
#: flatcamGUI/FlatCAMGUI.py:3225 flatcamGUI/FlatCAMGUI.py:3238
#: flatcamGUI/FlatCAMGUI.py:3272 flatcamGUI/FlatCAMGUI.py:3334
msgid "Click on target point."
msgstr "Click pe punctul tinta."

#: flatcamEditors/FlatCAMGeoEditor.py:4258
#: flatcamEditors/FlatCAMGeoEditor.py:4293
msgid "A selection of at least 2 geo items is required to do Intersection."
msgstr ""
"Cel puțin o selecţie de doua forme geometrice este necesară pentru a face o "
"Intersecţie."

#: flatcamEditors/FlatCAMGeoEditor.py:4379
#: flatcamEditors/FlatCAMGeoEditor.py:4488
msgid ""
"Negative buffer value is not accepted. Use Buffer interior to generate an "
"'inside' shape"
msgstr ""
"O valoare de bufer negativă nu se acceptă. Foloseste Bufer Interior pentru a "
"genera o formă geo. interioară"

#: flatcamEditors/FlatCAMGeoEditor.py:4389
#: flatcamEditors/FlatCAMGeoEditor.py:4445
#: flatcamEditors/FlatCAMGeoEditor.py:4497
msgid "Nothing selected for buffering."
msgstr "Nici-o forma geometrică nu este selectată pentru a face Bufer."

#: flatcamEditors/FlatCAMGeoEditor.py:4394
#: flatcamEditors/FlatCAMGeoEditor.py:4450
#: flatcamEditors/FlatCAMGeoEditor.py:4502
msgid "Invalid distance for buffering."
msgstr "Distanta invalida pentru a face Bufer."

#: flatcamEditors/FlatCAMGeoEditor.py:4418
#: flatcamEditors/FlatCAMGeoEditor.py:4522
msgid "Failed, the result is empty. Choose a different buffer value."
msgstr "Eșuat, rezultatul este gol. Foloseşte o valoare diferita pentru Bufer."

#: flatcamEditors/FlatCAMGeoEditor.py:4429
msgid "Full buffer geometry created."
msgstr "Geometrie tip Bufer Complet creată."

#: flatcamEditors/FlatCAMGeoEditor.py:4436
msgid "Negative buffer value is not accepted."
msgstr "Valoarea bufer negativă nu este acceptată."

#: flatcamEditors/FlatCAMGeoEditor.py:4470
msgid "Failed, the result is empty. Choose a smaller buffer value."
msgstr "Eșuat, rezultatul este gol. Foloseşte of valoare mai mica pt. Bufer."

#: flatcamEditors/FlatCAMGeoEditor.py:4481
msgid "Interior buffer geometry created."
msgstr "Geometrie Bufer interior creată."

#: flatcamEditors/FlatCAMGeoEditor.py:4533
msgid "Exterior buffer geometry created."
msgstr "Geometrie Bufer Exterior creată."

#: flatcamEditors/FlatCAMGeoEditor.py:4598
msgid "Nothing selected for painting."
msgstr "Nici-o forma geometrică nu este selectată pentru Paint."

#: flatcamEditors/FlatCAMGeoEditor.py:4605
msgid "Invalid value for"
msgstr "Valoare invalida pentru"

#: flatcamEditors/FlatCAMGeoEditor.py:4611
#, python-format
msgid "Could not do Paint. Overlap value has to be less than 1.00 (100%%)."
msgstr ""
"Nu se poate face Paint. Valoarea de suprapunere trebuie să fie mai puțin de "
"1.00 (100%%)."

#: flatcamEditors/FlatCAMGeoEditor.py:4670
msgid ""
"Could not do Paint. Try a different combination of parameters. Or a "
"different method of Paint"
msgstr ""
"Nu se poate face Paint. Incearcă o combinaţie diferita de parametri. Or o "
"metoda diferita de Paint"

#: flatcamEditors/FlatCAMGeoEditor.py:4684
msgid "Paint done."
msgstr "Pictare executata."

#: flatcamEditors/FlatCAMGrbEditor.py:208
msgid "To add an Pad first select a aperture in Aperture Table"
msgstr ""
"Pentru a adăuga un Pad mai intai selectează o apertură (unealtă) in Tabela "
"de Aperturi"

#: flatcamEditors/FlatCAMGrbEditor.py:215
#: flatcamEditors/FlatCAMGrbEditor.py:409
msgid "Aperture size is zero. It needs to be greater than zero."
msgstr "Dimens. aperturii este zero. Trebuie sa fie mai mare ca zero."

#: flatcamEditors/FlatCAMGrbEditor.py:366
#: flatcamEditors/FlatCAMGrbEditor.py:674
msgid ""
"Incompatible aperture type. Select an aperture with type 'C', 'R' or 'O'."
msgstr ""
"Tip de apertură incompatibil. Selectează o apertură cu tipul 'C', 'R' sau "
"'O'."

#: flatcamEditors/FlatCAMGrbEditor.py:379
msgid "Done. Adding Pad completed."
msgstr "Executat. Adăugarea padului terminată."

#: flatcamEditors/FlatCAMGrbEditor.py:401
msgid "To add an Pad Array first select a aperture in Aperture Table"
msgstr ""
"Pentru a adăuga o arie de paduri mai intai selectează o apertura (unealtă) "
"in Tabela de Aperturi"

#: flatcamEditors/FlatCAMGrbEditor.py:479
msgid "Click on the Pad Circular Array Start position"
msgstr "Click pe punctul de Start al ariei de paduri"

#: flatcamEditors/FlatCAMGrbEditor.py:700
msgid "Too many Pads for the selected spacing angle."
msgstr "Prea multe paduri pentru unghiul selectat."

#: flatcamEditors/FlatCAMGrbEditor.py:723
msgid "Done. Pad Array added."
msgstr "Executat. Aria de paduri a fost adăugată."

#: flatcamEditors/FlatCAMGrbEditor.py:744
msgid "Select shape(s) and then click ..."
msgstr "Selectează formele si apoi click ..."

#: flatcamEditors/FlatCAMGrbEditor.py:756
msgid "Failed. Nothing selected."
msgstr "Eșuat. Nu este nimic selectat."

#: flatcamEditors/FlatCAMGrbEditor.py:772
msgid ""
"Failed. Poligonize works only on geometries belonging to the same aperture."
msgstr ""
"Esuat. Poligonizarea lucrează doar asupra geometriilor care apartin aceleasi "
"aperturi."

#: flatcamEditors/FlatCAMGrbEditor.py:826
msgid "Done. Poligonize completed."
msgstr "Executat. Poligonizare completă."

#: flatcamEditors/FlatCAMGrbEditor.py:879
#: flatcamEditors/FlatCAMGrbEditor.py:1102
#: flatcamEditors/FlatCAMGrbEditor.py:1126
msgid "Corner Mode 1: 45 degrees ..."
msgstr "Mod Colt 1: 45 grade ..."

#: flatcamEditors/FlatCAMGrbEditor.py:881
msgid "Click on 1st point ..."
msgstr "Click pe primul punct ..."

#: flatcamEditors/FlatCAMGrbEditor.py:891
#: flatcamEditors/FlatCAMGrbEditor.py:1202
msgid "Click on next Point or click Right mouse button to complete ..."
msgstr ""
"Click pe punctul următor sau click buton dreapta al mousului pentru "
"terminare ..."

#: flatcamEditors/FlatCAMGrbEditor.py:1090
#: flatcamEditors/FlatCAMGrbEditor.py:1123
msgid "Corner Mode 2: Reverse 45 degrees ..."
msgstr "Mod Colt 2: Invers 45 grade ..."

#: flatcamEditors/FlatCAMGrbEditor.py:1093
#: flatcamEditors/FlatCAMGrbEditor.py:1120
msgid "Corner Mode 3: 90 degrees ..."
msgstr "Mod Colt 3: 90 grade ..."

#: flatcamEditors/FlatCAMGrbEditor.py:1096
#: flatcamEditors/FlatCAMGrbEditor.py:1117
msgid "Corner Mode 4: Reverse 90 degrees ..."
msgstr "Mod Colt 4: Invers 90 grade ..."

#: flatcamEditors/FlatCAMGrbEditor.py:1099
#: flatcamEditors/FlatCAMGrbEditor.py:1114
msgid "Corner Mode 5: Free angle ..."
msgstr "Mod Colt 5: Unghi liber ..."

#: flatcamEditors/FlatCAMGrbEditor.py:1153
#: flatcamEditors/FlatCAMGrbEditor.py:1319
#: flatcamEditors/FlatCAMGrbEditor.py:1358
msgid "Track Mode 1: 45 degrees ..."
msgstr "Mod Traseu 1: 45 grade ..."

#: flatcamEditors/FlatCAMGrbEditor.py:1299
#: flatcamEditors/FlatCAMGrbEditor.py:1353
msgid "Track Mode 2: Reverse 45 degrees ..."
msgstr "Mod Traseu 2: Invers 45 grade ..."

#: flatcamEditors/FlatCAMGrbEditor.py:1304
#: flatcamEditors/FlatCAMGrbEditor.py:1348
msgid "Track Mode 3: 90 degrees ..."
msgstr "Mod Traseu 3: 90 grade ..."

#: flatcamEditors/FlatCAMGrbEditor.py:1309
#: flatcamEditors/FlatCAMGrbEditor.py:1343
msgid "Track Mode 4: Reverse 90 degrees ..."
msgstr "Mod Traseu 4: Invers 90 grade ..."

#: flatcamEditors/FlatCAMGrbEditor.py:1314
#: flatcamEditors/FlatCAMGrbEditor.py:1338
msgid "Track Mode 5: Free angle ..."
msgstr "Mod Traseu 5: Unghi liber ..."

#: flatcamEditors/FlatCAMGrbEditor.py:1720
msgid "Scale the selected Gerber apertures ..."
msgstr "Șterge aperturile Gerber selectate ..."

#: flatcamEditors/FlatCAMGrbEditor.py:1762
msgid "Buffer the selected apertures ..."
msgstr "Bufereaza aperturile selectate."

#: flatcamEditors/FlatCAMGrbEditor.py:1804
msgid "Mark polygon areas in the edited Gerber ..."
msgstr "Marchează ariile poligonale in obiectul Gerber editat ..."

#: flatcamEditors/FlatCAMGrbEditor.py:1852
msgid "Nothing selected to move"
msgstr "Nimic nu este selectat pentru mutare"

#: flatcamEditors/FlatCAMGrbEditor.py:1976
msgid "Done. Apertures Move completed."
msgstr "Executat. Mutarea Aperturilor terminată."

#: flatcamEditors/FlatCAMGrbEditor.py:2053
msgid "Done. Apertures copied."
msgstr "Executat. Aperturile au fost copiate."

#: flatcamEditors/FlatCAMGrbEditor.py:2354 flatcamGUI/FlatCAMGUI.py:1757
#: flatcamGUI/PreferencesUI.py:1429
msgid "Gerber Editor"
msgstr "Editor Gerber"

#: flatcamEditors/FlatCAMGrbEditor.py:2374 flatcamGUI/ObjectUI.py:192
#: flatcamTools/ToolProperties.py:137
msgid "Apertures"
msgstr "Aperturi"

#: flatcamEditors/FlatCAMGrbEditor.py:2376 flatcamGUI/ObjectUI.py:194
msgid "Apertures Table for the Gerber Object."
msgstr "Tabela de aperturi pt obiectul Gerber."

#: flatcamEditors/FlatCAMGrbEditor.py:2387
#: flatcamEditors/FlatCAMGrbEditor.py:3687 flatcamGUI/ObjectUI.py:227
msgid "Code"
msgstr "Cod"

#: flatcamEditors/FlatCAMGrbEditor.py:2387
#: flatcamEditors/FlatCAMGrbEditor.py:3687 flatcamGUI/ObjectUI.py:227
#: flatcamGUI/ObjectUI.py:957 flatcamGUI/ObjectUI.py:1522
msgid "Type"
msgstr "Tip"

#: flatcamEditors/FlatCAMGrbEditor.py:2387
#: flatcamEditors/FlatCAMGrbEditor.py:3687 flatcamGUI/ObjectUI.py:227
msgid "Size"
msgstr "Dimens."

#: flatcamEditors/FlatCAMGrbEditor.py:2387
#: flatcamEditors/FlatCAMGrbEditor.py:3687 flatcamGUI/ObjectUI.py:227
msgid "Dim"
msgstr "Dim"

#: flatcamEditors/FlatCAMGrbEditor.py:2391 flatcamGUI/ObjectUI.py:231
msgid "Index"
msgstr "Index"

#: flatcamEditors/FlatCAMGrbEditor.py:2393
#: flatcamEditors/FlatCAMGrbEditor.py:2420 flatcamGUI/ObjectUI.py:233
msgid "Aperture Code"
msgstr "Cod"

#: flatcamEditors/FlatCAMGrbEditor.py:2395 flatcamGUI/ObjectUI.py:235
msgid "Type of aperture: circular, rectangle, macros etc"
msgstr ""
"Tipul aperturilor:\n"
"- circular\n"
"- patrulater\n"
"- macro-uri\n"
"etc"

#: flatcamEditors/FlatCAMGrbEditor.py:2397 flatcamGUI/ObjectUI.py:237
msgid "Aperture Size:"
msgstr "Dim. aper."

#: flatcamEditors/FlatCAMGrbEditor.py:2399 flatcamGUI/ObjectUI.py:239
msgid ""
"Aperture Dimensions:\n"
" - (width, height) for R, O type.\n"
" - (dia, nVertices) for P type"
msgstr ""
"Dimensiunile aperturilor:\n"
"- (latime, inaltime) pt tipurile R, O.\n"
"- (diametru, nVertices) pt tipul P"

#: flatcamEditors/FlatCAMGrbEditor.py:2422 flatcamGUI/PreferencesUI.py:1458
msgid "Code for the new aperture"
msgstr "Diametru pentru noua apertură"

#: flatcamEditors/FlatCAMGrbEditor.py:2430
msgid "Aperture Size"
msgstr "Dim. aper"

#: flatcamEditors/FlatCAMGrbEditor.py:2432
msgid ""
"Size for the new aperture.\n"
"If aperture type is 'R' or 'O' then\n"
"this value is automatically\n"
"calculated as:\n"
"sqrt(width**2 + height**2)"
msgstr ""
"Dimensiunea pt noua apertură.\n"
"Dacă tipul aperturii este 'R' sau 'O'\n"
"valoarea este calculată automat prin:\n"
"sqrt(lătime**2 + inăltime**2)"

#: flatcamEditors/FlatCAMGrbEditor.py:2444
msgid "Aperture Type"
msgstr "Tip aper"

#: flatcamEditors/FlatCAMGrbEditor.py:2446
msgid ""
"Select the type of new aperture. Can be:\n"
"C = circular\n"
"R = rectangular\n"
"O = oblong"
msgstr ""
"Selectează noul tip de apertură. Poate fi:\n"
"C = circular\n"
"R = rectangular\n"
"O = oval"

#: flatcamEditors/FlatCAMGrbEditor.py:2457
msgid "Aperture Dim"
msgstr "Dim. aper"

#: flatcamEditors/FlatCAMGrbEditor.py:2459
msgid ""
"Dimensions for the new aperture.\n"
"Active only for rectangular apertures (type R).\n"
"The format is (width, height)"
msgstr ""
"Dimensiunile pentru noua apertură.\n"
"Activă doar pentru aperturile rectangulare (tip 'R').\n"
"Formatul este (lătime, inăltime)"

#: flatcamEditors/FlatCAMGrbEditor.py:2468
msgid "Add/Delete Aperture"
msgstr "Adaugă/Șterge apertură"

#: flatcamEditors/FlatCAMGrbEditor.py:2470
msgid "Add/Delete an aperture in the aperture table"
msgstr "Adaugă/Șterge o apertură din lista de aperturi"

#: flatcamEditors/FlatCAMGrbEditor.py:2479
msgid "Add a new aperture to the aperture list."
msgstr "Adaugă o nouă apertură in lista de aperturi."

#: flatcamEditors/FlatCAMGrbEditor.py:2484
msgid "Delete a aperture in the aperture list"
msgstr "Șterge o apertură din lista de aperturi"

#: flatcamEditors/FlatCAMGrbEditor.py:2501
msgid "Buffer Aperture"
msgstr "Bufer pt apertură"

#: flatcamEditors/FlatCAMGrbEditor.py:2503
msgid "Buffer a aperture in the aperture list"
msgstr "Fă bufer pt o apertură din lista de aperturi"

#: flatcamEditors/FlatCAMGrbEditor.py:2513 flatcamGUI/PreferencesUI.py:1581
msgid "Buffer distance"
msgstr "Distanta pt bufer"

#: flatcamEditors/FlatCAMGrbEditor.py:2514
msgid "Buffer corner"
msgstr "Coltul pt bufer"

#: flatcamEditors/FlatCAMGrbEditor.py:2516
msgid ""
"There are 3 types of corners:\n"
" - 'Round': the corner is rounded.\n"
" - 'Square:' the corner is met in a sharp angle.\n"
" - 'Beveled:' the corner is a line that directly connects the features "
"meeting in the corner"
msgstr ""
"Sunt disponibile 3 tipuri de colțuri:\n"
" - 'Rotund': coltul este rotunjit.\n"
" - 'Patrat:' colțurile formează unghi de 90 grade.\n"
" - 'Beveled:' coltul este inlocuit cu o linie care uneste capetele liniilor "
"care formează coltul"

#: flatcamEditors/FlatCAMGrbEditor.py:2531 flatcamGUI/FlatCAMGUI.py:751
#: flatcamGUI/FlatCAMGUI.py:1692 flatcamGUI/FlatCAMGUI.py:1743
#: flatcamGUI/FlatCAMGUI.py:1770 flatcamGUI/FlatCAMGUI.py:2193
msgid "Buffer"
msgstr "Bufer"

#: flatcamEditors/FlatCAMGrbEditor.py:2546
msgid "Scale Aperture"
msgstr "Scalează aper."

#: flatcamEditors/FlatCAMGrbEditor.py:2548
msgid "Scale a aperture in the aperture list"
msgstr "Scalează o apertură in lista de aperturi"

#: flatcamEditors/FlatCAMGrbEditor.py:2556 flatcamGUI/PreferencesUI.py:1594
msgid "Scale factor"
msgstr "Factor Scalare"

#: flatcamEditors/FlatCAMGrbEditor.py:2558
msgid ""
"The factor by which to scale the selected aperture.\n"
"Values can be between 0.0000 and 999.9999"
msgstr ""
"Factorul cu care se va face scalarea aperturii selectate.\n"
"Poate lua valori intre: 0.000 si 999.9999"

#: flatcamEditors/FlatCAMGrbEditor.py:2584
msgid "Mark polygon areas"
msgstr "Marchează ariile poligonale"

#: flatcamEditors/FlatCAMGrbEditor.py:2586
msgid "Mark the polygon areas."
msgstr "Marchează ariile poligonale."

#: flatcamEditors/FlatCAMGrbEditor.py:2594
msgid "Area UPPER threshold"
msgstr "Pragul de sus pt. arie"

#: flatcamEditors/FlatCAMGrbEditor.py:2596
msgid ""
"The threshold value, all areas less than this are marked.\n"
"Can have a value between 0.0000 and 9999.9999"
msgstr ""
"Valoare de prag, toate poligoanele cu arii mai mici vor fi marcate.\n"
"Poate lua valori intre: 0.000 si 999.9999"

#: flatcamEditors/FlatCAMGrbEditor.py:2602
msgid "Area LOWER threshold"
msgstr "Pragul de jos pt. arie"

#: flatcamEditors/FlatCAMGrbEditor.py:2604
msgid ""
"The threshold value, all areas more than this are marked.\n"
"Can have a value between 0.0000 and 9999.9999"
msgstr ""
"Valoare de prag, toate poligoanele cu arii mai mari vor fi marcate.\n"
"Poate lua valori intre: 0.000 si 999.9999"

#: flatcamEditors/FlatCAMGrbEditor.py:2617
msgid "Go"
msgstr "Execută"

#: flatcamEditors/FlatCAMGrbEditor.py:2636 flatcamGUI/FlatCAMGUI.py:741
#: flatcamGUI/FlatCAMGUI.py:1692 flatcamGUI/FlatCAMGUI.py:2183
msgid "Add Pad Array"
msgstr "Adaugă o arie de paduri"

#: flatcamEditors/FlatCAMGrbEditor.py:2638
msgid "Add an array of pads (linear or circular array)"
msgstr "Adaugă o arie de paduri (arie lineara sau circulara)."

#: flatcamEditors/FlatCAMGrbEditor.py:2644
msgid ""
"Select the type of pads array to create.\n"
"It can be Linear X(Y) or Circular"
msgstr ""
"Selectează tipul de arii de paduri.\n"
"Poate fi Liniar X(Y) sau Circular"

#: flatcamEditors/FlatCAMGrbEditor.py:2655 flatcamGUI/PreferencesUI.py:1493
msgid "Nr of pads"
msgstr "Nr. paduri"

#: flatcamEditors/FlatCAMGrbEditor.py:2657 flatcamGUI/PreferencesUI.py:1495
msgid "Specify how many pads to be in the array."
msgstr "Specifica cate paduri să fie incluse in arie."

#: flatcamEditors/FlatCAMGrbEditor.py:3168
#: flatcamEditors/FlatCAMGrbEditor.py:3172
msgid "Aperture code value is missing or wrong format. Add it and retry."
msgstr ""
"Valoarea codului aperturii lipseste sau este in format greșit. Adaugă din "
"nou și reîncearcă."

#: flatcamEditors/FlatCAMGrbEditor.py:3208
msgid ""
"Aperture dimensions value is missing or wrong format. Add it in format "
"(width, height) and retry."
msgstr ""
"Dimensiunile aperturii lipsesc sau sunt intr-un format greșit. Adaugă din "
"nou și reîncearcă."

#: flatcamEditors/FlatCAMGrbEditor.py:3221
msgid "Aperture size value is missing or wrong format. Add it and retry."
msgstr ""
"Valoarea mărimii aperturii lipseste sau este in format greșit. Adaugă din "
"nou și reîncearcă."

#: flatcamEditors/FlatCAMGrbEditor.py:3232
msgid "Aperture already in the aperture table."
msgstr "Apertura este deja in lista de aperturi."

#: flatcamEditors/FlatCAMGrbEditor.py:3240
msgid "Added new aperture with code"
msgstr "O nouă apertură este adăugată cu codul"

#: flatcamEditors/FlatCAMGrbEditor.py:3269
msgid " Select an aperture in Aperture Table"
msgstr " Selectează o unealtă in Tabela de Aperturi"

#: flatcamEditors/FlatCAMGrbEditor.py:3276
msgid "Select an aperture in Aperture Table -->"
msgstr "Selectează o unealtă in Tabela de Aperturi -->"

#: flatcamEditors/FlatCAMGrbEditor.py:3300
msgid "Deleted aperture with code"
msgstr "A fost stearsă unealta cu codul"

#: flatcamEditors/FlatCAMGrbEditor.py:3813
msgid "Adding geometry for aperture"
msgstr "Se adaugă geometria pentru apertura"

#: flatcamEditors/FlatCAMGrbEditor.py:3996
msgid ""
"There are no Aperture definitions in the file. Aborting Gerber creation."
msgstr ""
"Nu există definitii de aperturi in fişier. Se anulează crearea de obiect "
"Gerber."

#: flatcamEditors/FlatCAMGrbEditor.py:4006
msgid "Creating Gerber."
msgstr "Gerber in curs de creare."

#: flatcamEditors/FlatCAMGrbEditor.py:4015
msgid "Done. Gerber editing finished."
msgstr "Editarea Gerber a fost terminată."

#: flatcamEditors/FlatCAMGrbEditor.py:4032
msgid "Cancelled. No aperture is selected"
msgstr "Anulat. Nici-o apertură nu este selectată"

#: flatcamEditors/FlatCAMGrbEditor.py:4583
msgid "Failed. No aperture geometry is selected."
msgstr "Anulat. Nici-o geometrie de apertură nu este selectată."

#: flatcamEditors/FlatCAMGrbEditor.py:4592
msgid "Done. Apertures geometry deleted."
msgstr "Executat. Geometriile aperturilor au fost șterse."

#: flatcamEditors/FlatCAMGrbEditor.py:4735
msgid "No aperture to buffer. Select at least one aperture and try again."
msgstr ""
"Nici-o apertură sel. pt a face bufer. Selectează cel puțin o apertură și "
"încearcă din nou."

#: flatcamEditors/FlatCAMGrbEditor.py:4748
msgid "Failed."
msgstr "Esuat."

#: flatcamEditors/FlatCAMGrbEditor.py:4767
msgid "Scale factor value is missing or wrong format. Add it and retry."
msgstr ""
"Valoarea factorului de scalare lipseste sau este in format gresit. Adaugă "
"din nou și reîncearcă."

#: flatcamEditors/FlatCAMGrbEditor.py:4799
msgid "No aperture to scale. Select at least one aperture and try again."
msgstr ""
"Nici-o apertură sel. pt scalare. Selectează cel puțin o apertură și încearcă "
"din nou."

#: flatcamEditors/FlatCAMGrbEditor.py:4815
msgid "Done. Scale Tool completed."
msgstr "Executat. Unealta Scalare a terminat."

#: flatcamEditors/FlatCAMGrbEditor.py:4853
msgid "Polygon areas marked."
msgstr "Ariile poligonale sunt marcate."

#: flatcamEditors/FlatCAMGrbEditor.py:4856
msgid "There are no polygons to mark area."
msgstr "Nu există poligoane care sa fie marcate."

#: flatcamEditors/FlatCAMGrbEditor.py:5627
msgid "Rotation action was not executed."
msgstr "Actiuena de rotatie nu a fost efectuatăt."

#: flatcamEditors/FlatCAMGrbEditor.py:5766
msgid "Skew action was not executed."
msgstr "Actiunea de deformare nu a fost efectuată."

#: flatcamEditors/FlatCAMGrbEditor.py:5836
msgid "Scale action was not executed."
msgstr "Actiuena de scalare nu a fost efectuată."

#: flatcamEditors/FlatCAMGrbEditor.py:5885
msgid "Offset action was not executed."
msgstr "Actiuena de offset nu a fost efectuată."

#: flatcamEditors/FlatCAMGrbEditor.py:5941
msgid "Geometry shape offset Y cancelled"
msgstr "Deplasarea formei geometrice pe axa Y anulată"

#: flatcamEditors/FlatCAMGrbEditor.py:5958
msgid "Geometry shape skew X cancelled"
msgstr "Deformarea formei geometrice pe axa X anulată"

#: flatcamEditors/FlatCAMGrbEditor.py:5975
msgid "Geometry shape skew Y cancelled"
msgstr "Deformarea formei geometrice pe axa Y executată"

#: flatcamGUI/FlatCAMGUI.py:47
msgid "&File"
msgstr "&Fişiere"

#: flatcamGUI/FlatCAMGUI.py:52
msgid "&New Project ...\tCTRL+N"
msgstr "&Proiect Nou...\tCTRL+N"

#: flatcamGUI/FlatCAMGUI.py:54
msgid "Will create a new, blank project"
msgstr "Se va crea un proiect nou, fără continut"

#: flatcamGUI/FlatCAMGUI.py:59
msgid "&New"
msgstr "&Nou"

#: flatcamGUI/FlatCAMGUI.py:62
msgid "Geometry\tN"
msgstr "Geometrie\tN"

#: flatcamGUI/FlatCAMGUI.py:64
msgid "Will create a new, empty Geometry Object."
msgstr "Va crea un obiect nou de tip Geometrie, fără continut."

#: flatcamGUI/FlatCAMGUI.py:66
msgid "Gerber\tB"
msgstr "Gerber\tB"

#: flatcamGUI/FlatCAMGUI.py:68
msgid "Will create a new, empty Gerber Object."
msgstr "Va crea un obiect nou de tip Gerber, fără continut."

#: flatcamGUI/FlatCAMGUI.py:70
msgid "Excellon\tL"
msgstr "Excellon\tL"

#: flatcamGUI/FlatCAMGUI.py:72
msgid "Will create a new, empty Excellon Object."
msgstr "Va crea un obiect nou de tip Excellon, fără continut."

#: flatcamGUI/FlatCAMGUI.py:75 flatcamGUI/FlatCAMGUI.py:3586
#: flatcamTools/ToolPcbWizard.py:62 flatcamTools/ToolPcbWizard.py:69
msgid "Open"
msgstr "Încarcă"

#: flatcamGUI/FlatCAMGUI.py:79
msgid "Open &Project ..."
msgstr "Încarcă &Project ..."

#: flatcamGUI/FlatCAMGUI.py:85 flatcamGUI/FlatCAMGUI.py:3595
msgid "Open &Gerber ...\tCTRL+G"
msgstr "Încarcă &Gerber ...\tCTRL+G"

#: flatcamGUI/FlatCAMGUI.py:90 flatcamGUI/FlatCAMGUI.py:3600
msgid "Open &Excellon ...\tCTRL+E"
msgstr "Încarcă  &Excellon ...\tCTRL+E"

#: flatcamGUI/FlatCAMGUI.py:94 flatcamGUI/FlatCAMGUI.py:3604
msgid "Open G-&Code ..."
msgstr "Încarcă G-&Code ..."

#: flatcamGUI/FlatCAMGUI.py:100
msgid "Open Config ..."
msgstr "Încarcă Config ..."

#: flatcamGUI/FlatCAMGUI.py:104
msgid "Recent projects"
msgstr "Proiectele recente"

#: flatcamGUI/FlatCAMGUI.py:105
msgid "Recent files"
msgstr "Fişierele Recente"

#: flatcamGUI/FlatCAMGUI.py:111
msgid "Scripting"
msgstr "Scripting"

#: flatcamGUI/FlatCAMGUI.py:114 flatcamGUI/FlatCAMGUI.py:666
#: flatcamGUI/FlatCAMGUI.py:2104
msgid "New Script ..."
msgstr "Script nou ..."

#: flatcamGUI/FlatCAMGUI.py:115 flatcamGUI/FlatCAMGUI.py:667
#: flatcamGUI/FlatCAMGUI.py:2105
msgid "Open Script ..."
msgstr "Încarcă &Script..."

#: flatcamGUI/FlatCAMGUI.py:117 flatcamGUI/FlatCAMGUI.py:668
#: flatcamGUI/FlatCAMGUI.py:2106 flatcamGUI/FlatCAMGUI.py:3575
msgid "Run Script ..."
msgstr "Rulează Script..."

#: flatcamGUI/FlatCAMGUI.py:119 flatcamGUI/FlatCAMGUI.py:3577
msgid ""
"Will run the opened Tcl Script thus\n"
"enabling the automation of certain\n"
"functions of FlatCAM."
msgstr ""
"Va rula un script TCL astfel oferind\n"
"o automatizare a anumitor functii\n"
"din FlatCAM."

#: flatcamGUI/FlatCAMGUI.py:132
msgid "Import"
msgstr "Import"

#: flatcamGUI/FlatCAMGUI.py:134
msgid "&SVG as Geometry Object ..."
msgstr "&SVG ca și obiect Geometrie ..."

#: flatcamGUI/FlatCAMGUI.py:137
msgid "&SVG as Gerber Object ..."
msgstr "&SVG ca și obiect Gerber ..."

#: flatcamGUI/FlatCAMGUI.py:142
msgid "&DXF as Geometry Object ..."
msgstr "&DXF ca și obiect Geometrie ..."

#: flatcamGUI/FlatCAMGUI.py:145
msgid "&DXF as Gerber Object ..."
msgstr "&DXF ca și obiect Gerber ..."

#: flatcamGUI/FlatCAMGUI.py:150
msgid "Export"
msgstr "Export"

#: flatcamGUI/FlatCAMGUI.py:153
msgid "Export &SVG ..."
msgstr "Exporta &SVG ..."

#: flatcamGUI/FlatCAMGUI.py:156
msgid "Export DXF ..."
msgstr "Exporta DXF ..."

#: flatcamGUI/FlatCAMGUI.py:161
msgid "Export &PNG ..."
msgstr "Exporta &PNG ..."

#: flatcamGUI/FlatCAMGUI.py:163
msgid ""
"Will export an image in PNG format,\n"
"the saved image will contain the visual \n"
"information currently in FlatCAM Plot Area."
msgstr ""
"Va exporta o imagine in format PNG,\n"
"imagina salvata va contine elementele vizuale\n"
"afisate in zona de afișare."

#: flatcamGUI/FlatCAMGUI.py:172
msgid "Export &Excellon ..."
msgstr "Exporta Excellon ..."

#: flatcamGUI/FlatCAMGUI.py:174
msgid ""
"Will export an Excellon Object as Excellon file,\n"
"the coordinates format, the file units and zeros\n"
"are set in Preferences -> Excellon Export."
msgstr ""
"Va exporta un obiect Excellon intr-un fişier Excellon.\n"
"Formatul coordonatelor, unitatile de masura și tipul\n"
"de zerouri se vor seta in Preferințe -> Export Excellon."

#: flatcamGUI/FlatCAMGUI.py:181
msgid "Export &Gerber ..."
msgstr "Exporta &Gerber ..."

#: flatcamGUI/FlatCAMGUI.py:183
msgid ""
"Will export an Gerber Object as Gerber file,\n"
"the coordinates format, the file units and zeros\n"
"are set in Preferences -> Gerber Export."
msgstr ""
"Va exporta un obiect Gerber intr-un fişier Gerber.\n"
"Formatul coordonatelor, unitatile de măsură și tipul\n"
"de zerouri se vor seta in Preferințe -> Export Gerber."

#: flatcamGUI/FlatCAMGUI.py:199
msgid "Backup"
msgstr "Backup"

#: flatcamGUI/FlatCAMGUI.py:203
msgid "Import Preferences from file ..."
msgstr "Importați Preferințele din fișier ..."

#: flatcamGUI/FlatCAMGUI.py:208
msgid "Export Preferences to file ..."
msgstr "Exportați Preferințele într-un fișier ..."

#: flatcamGUI/FlatCAMGUI.py:214 flatcamGUI/FlatCAMGUI.py:554
msgid "Save"
msgstr "Salvează"

#: flatcamGUI/FlatCAMGUI.py:217
msgid "&Save Project ..."
msgstr "&Salvează Proiect ..."

#: flatcamGUI/FlatCAMGUI.py:222
msgid "Save Project &As ...\tCTRL+S"
msgstr "Salvează Proiect &ca ...\tCTRL+S"

#: flatcamGUI/FlatCAMGUI.py:227
msgid "Save Project C&opy ..."
msgstr "Salvează o C&opie Proiect..."

#: flatcamGUI/FlatCAMGUI.py:234
msgid "E&xit"
msgstr "Iesire"

#: flatcamGUI/FlatCAMGUI.py:240
msgid "&Edit"
msgstr "&Editare"

#: flatcamGUI/FlatCAMGUI.py:243
msgid "Edit Object\tE"
msgstr "Editare Obiect\tE"

#: flatcamGUI/FlatCAMGUI.py:244
msgid "Close Editor\tCTRL+S"
msgstr "Salvează Editor\tCTRL+S"

#: flatcamGUI/FlatCAMGUI.py:252
msgid "Conversion"
msgstr "Conversii"

#: flatcamGUI/FlatCAMGUI.py:254
msgid "&Join Geo/Gerber/Exc -> Geo"
msgstr "&Fuzionează Geo/Gerber/Exc -> Geo"

#: flatcamGUI/FlatCAMGUI.py:256
msgid ""
"Merge a selection of objects, which can be of type:\n"
"- Gerber\n"
"- Excellon\n"
"- Geometry\n"
"into a new combo Geometry object."
msgstr ""
"Fuzionează o selecţie de obiecte care pot fi de tipul:\n"
"- Gerber\n"
"- Excellon\n"
"- Geometrie\n"
"intr-un nou obiect tip Geometrie >combo<."

#: flatcamGUI/FlatCAMGUI.py:263
msgid "Join Excellon(s) -> Excellon"
msgstr "Fuzionează Excellon(s) -> Excellon"

#: flatcamGUI/FlatCAMGUI.py:265
msgid "Merge a selection of Excellon objects into a new combo Excellon object."
msgstr ""
"Fuzionează o selecţie de obiecte Excellon intr-un nou obiect Excellon "
">combo<."

#: flatcamGUI/FlatCAMGUI.py:268
msgid "Join Gerber(s) -> Gerber"
msgstr "Fuzionează Gerber(s) -> Gerber"

#: flatcamGUI/FlatCAMGUI.py:270
msgid "Merge a selection of Gerber objects into a new combo Gerber object."
msgstr ""
"Fuzionează o selecţie de obiecte Gerber intr-un nou obiect Gerber >combo<."

#: flatcamGUI/FlatCAMGUI.py:275
msgid "Convert Single to MultiGeo"
msgstr "Converteste SingleGeo in MultiGeo"

#: flatcamGUI/FlatCAMGUI.py:277
msgid ""
"Will convert a Geometry object from single_geometry type\n"
"to a multi_geometry type."
msgstr ""
"Va converti un obiect Geometrie din tipul simpla geometrie (SingleGeo)\n"
"la tipul geometrie complexa (MultiGeo)."

#: flatcamGUI/FlatCAMGUI.py:281
msgid "Convert Multi to SingleGeo"
msgstr "Converteste MultiGeo in SingleGeo"

#: flatcamGUI/FlatCAMGUI.py:283
msgid ""
"Will convert a Geometry object from multi_geometry type\n"
"to a single_geometry type."
msgstr ""
"Va converti un obiect Geometrie din tipul geometrie complexa (MultiGeo)\n"
"la tipul geometrie simpla (SingleGeo)."

#: flatcamGUI/FlatCAMGUI.py:289
msgid "Convert Any to Geo"
msgstr "Converteste Oricare to Geo"

#: flatcamGUI/FlatCAMGUI.py:291
msgid "Convert Any to Gerber"
msgstr "Converteste Oricare in Gerber"

#: flatcamGUI/FlatCAMGUI.py:296
msgid "&Copy\tCTRL+C"
msgstr "&Copiază\tCTRL+C"

#: flatcamGUI/FlatCAMGUI.py:300
msgid "&Delete\tDEL"
msgstr "&Șterge\tDEL"

#: flatcamGUI/FlatCAMGUI.py:304
msgid "Se&t Origin\tO"
msgstr "Se&tează Originea\tO"

#: flatcamGUI/FlatCAMGUI.py:305
msgid "Jump to Location\tJ"
msgstr "Sari la Locaţie\tJ"

#: flatcamGUI/FlatCAMGUI.py:310
msgid "Toggle Units\tQ"
msgstr "Comută Unitati\tQ"

#: flatcamGUI/FlatCAMGUI.py:311
msgid "&Select All\tCTRL+A"
msgstr "&Selectează Tot\tCTRL+A"

#: flatcamGUI/FlatCAMGUI.py:315
msgid "&Preferences\tSHIFT+P"
msgstr "&Preferințe\tSHIFT+P"

#: flatcamGUI/FlatCAMGUI.py:318
msgid "&Options"
msgstr "&Opțiuni"

#: flatcamGUI/FlatCAMGUI.py:333
msgid "&Rotate Selection\tSHIFT+(R)"
msgstr "&Roteste Selectia\tSHIFT+(R)"

#: flatcamGUI/FlatCAMGUI.py:338
msgid "&Skew on X axis\tSHIFT+X"
msgstr "&Deformează pe axa X\tSHIFT+X"

#: flatcamGUI/FlatCAMGUI.py:340
msgid "S&kew on Y axis\tSHIFT+Y"
msgstr "Deformează pe axa Y\tSHIFT+Y"

#: flatcamGUI/FlatCAMGUI.py:345
msgid "Flip on &X axis\tX"
msgstr "Oglindește pe axa &X\tX"

#: flatcamGUI/FlatCAMGUI.py:347
msgid "Flip on &Y axis\tY"
msgstr "Oglindește pe axa &Y\tY"

#: flatcamGUI/FlatCAMGUI.py:352
msgid "View source\tALT+S"
msgstr "Vezi sursa\tALT+S"

#: flatcamGUI/FlatCAMGUI.py:357
msgid "&View"
msgstr "&Vizualizare"

#: flatcamGUI/FlatCAMGUI.py:358
msgid "Enable all plots\tALT+1"
msgstr "Activează toate afişările\tALT+1"

#: flatcamGUI/FlatCAMGUI.py:360
msgid "Disable all plots\tALT+2"
msgstr "Dezactivează toate afişările\tALT+2"

#: flatcamGUI/FlatCAMGUI.py:362
msgid "Disable non-selected\tALT+3"
msgstr "Dezactivează non-selectate\tALT+3"

#: flatcamGUI/FlatCAMGUI.py:365
msgid "&Zoom Fit\tV"
msgstr "&Mărește și potrivește\tV"

#: flatcamGUI/FlatCAMGUI.py:366
msgid "&Zoom In\t="
msgstr "&Măreste\t="

#: flatcamGUI/FlatCAMGUI.py:367
msgid "&Zoom Out\t-"
msgstr "&Micșorează\t-"

#: flatcamGUI/FlatCAMGUI.py:371
msgid "Redraw All\tF5"
msgstr "Reafisare Toate\tF5"

#: flatcamGUI/FlatCAMGUI.py:375
msgid "Toggle Code Editor\tCTRL+E"
msgstr "Comută Editorul de cod\tCTRL+E"

#: flatcamGUI/FlatCAMGUI.py:378
msgid "&Toggle FullScreen\tALT+F10"
msgstr "Comută FullScreen\tALT+F10"

#: flatcamGUI/FlatCAMGUI.py:380
msgid "&Toggle Plot Area\tCTRL+F10"
msgstr "Comută Aria de Afișare\tCTRL+F10"

#: flatcamGUI/FlatCAMGUI.py:382
msgid "&Toggle Project/Sel/Tool\t`"
msgstr "Comută Proiect/Sel/Unealta\t`"

#: flatcamGUI/FlatCAMGUI.py:385
msgid "&Toggle Grid Snap\tG"
msgstr "Comută Grid\tG"

#: flatcamGUI/FlatCAMGUI.py:387
msgid "&Toggle Axis\tSHIFT+G"
msgstr "Comută Axe\tSHIFT+G"

#: flatcamGUI/FlatCAMGUI.py:390
msgid "Toggle Workspace\tSHIFT+W"
msgstr "Comută Suprafata de lucru\tSHIFT+W"

#: flatcamGUI/FlatCAMGUI.py:393
msgid "&Tool"
msgstr "Unelte"

#: flatcamGUI/FlatCAMGUI.py:395
msgid "&Command Line\tS"
msgstr "&Linie de comanda\tS"

#: flatcamGUI/FlatCAMGUI.py:398
msgid "&Help"
msgstr "Ajutor"

#: flatcamGUI/FlatCAMGUI.py:399
msgid "Online Help\tF1"
msgstr "Resurse online\tF1"

#: flatcamGUI/FlatCAMGUI.py:400
msgid "FlatCAM.org"
msgstr "FlatCAM.org"

#: flatcamGUI/FlatCAMGUI.py:402
msgid "Report a bug"
msgstr "Raportati o eroare program"

#: flatcamGUI/FlatCAMGUI.py:405
msgid "Excellon Specification"
msgstr "Specificatii Excellon"

#: flatcamGUI/FlatCAMGUI.py:407
msgid "Gerber Specification"
msgstr "Specificatii Gerber"

#: flatcamGUI/FlatCAMGUI.py:412
msgid "Shortcuts List\tF3"
msgstr "Lista shortcut-uri\tF3"

#: flatcamGUI/FlatCAMGUI.py:413
msgid "YouTube Channel\tF4"
msgstr "YouTube \tF4"

#: flatcamGUI/FlatCAMGUI.py:422
msgid "Add Circle\tO"
msgstr "Adaugă Cerc\tO"

#: flatcamGUI/FlatCAMGUI.py:424
msgid "Add Arc\tA"
msgstr "Adaugă Arc\tA"

#: flatcamGUI/FlatCAMGUI.py:427
msgid "Add Rectangle\tR"
msgstr "Adaugă Patrulater\tR"

#: flatcamGUI/FlatCAMGUI.py:430
msgid "Add Polygon\tN"
msgstr "Adaugă Poligon\tN"

#: flatcamGUI/FlatCAMGUI.py:432
msgid "Add Path\tP"
msgstr "Adaugă Cale\tP"

#: flatcamGUI/FlatCAMGUI.py:434
msgid "Add Text\tT"
msgstr "Adaugă Text\tT"

#: flatcamGUI/FlatCAMGUI.py:437
msgid "Polygon Union\tU"
msgstr "Uniune Poligoane\tU"

#: flatcamGUI/FlatCAMGUI.py:439
msgid "Polygon Intersection\tE"
msgstr "Intersecţie Poligoane\tE"

#: flatcamGUI/FlatCAMGUI.py:441
msgid "Polygon Subtraction\tS"
msgstr "Substracţie Poligoane\tS"

#: flatcamGUI/FlatCAMGUI.py:445
msgid "Cut Path\tX"
msgstr "Tăiere Cale\tX"

#: flatcamGUI/FlatCAMGUI.py:447
msgid "Copy Geom\tC"
msgstr "Copiază Geo\tC"

#: flatcamGUI/FlatCAMGUI.py:449
msgid "Delete Shape\tDEL"
msgstr "Șterge forma Geo.\tDEL"

#: flatcamGUI/FlatCAMGUI.py:452 flatcamGUI/FlatCAMGUI.py:529
msgid "Move\tM"
msgstr "Muta\tM"

#: flatcamGUI/FlatCAMGUI.py:454
msgid "Buffer Tool\tB"
msgstr "Unealta Bufer\tB"

#: flatcamGUI/FlatCAMGUI.py:457
msgid "Paint Tool\tI"
msgstr "Unealta Paint\t"

#: flatcamGUI/FlatCAMGUI.py:460
msgid "Transform Tool\tALT+R"
msgstr "Unealta Transformare\tALT+R"

#: flatcamGUI/FlatCAMGUI.py:464
msgid "Toggle Corner Snap\tK"
msgstr "Comută lipire colt\tK"

#: flatcamGUI/FlatCAMGUI.py:467
msgid ">Excellon Editor<"
msgstr ">Editor Excellon<"

#: flatcamGUI/FlatCAMGUI.py:471
msgid "Add Drill Array\tA"
msgstr "Adaugă Arie Găuriri\tA"

#: flatcamGUI/FlatCAMGUI.py:473
msgid "Add Drill\tD"
msgstr "Adaugă Găurire\tD"

#: flatcamGUI/FlatCAMGUI.py:477
msgid "Add Slot Array\tQ"
msgstr "Adăugați Arie de Sloturi\tQ"

#: flatcamGUI/FlatCAMGUI.py:479
msgid "Add Slot\tW"
msgstr "Adăugați Slot\tW"

#: flatcamGUI/FlatCAMGUI.py:483
msgid "Resize Drill(S)\tR"
msgstr "Redimens. Găuriri\tR"

#: flatcamGUI/FlatCAMGUI.py:485 flatcamGUI/FlatCAMGUI.py:524
msgid "Copy\tC"
msgstr "Copiază\tC"

#: flatcamGUI/FlatCAMGUI.py:487 flatcamGUI/FlatCAMGUI.py:526
msgid "Delete\tDEL"
msgstr "Șterge\tDEL"

#: flatcamGUI/FlatCAMGUI.py:492
msgid "Move Drill(s)\tM"
msgstr "Muta Găuriri\tM"

#: flatcamGUI/FlatCAMGUI.py:495
msgid ">Gerber Editor<"
msgstr ">Editor Gerber<"

#: flatcamGUI/FlatCAMGUI.py:499
msgid "Add Pad\tP"
msgstr "Adaugă Pad\tP"

#: flatcamGUI/FlatCAMGUI.py:501
msgid "Add Pad Array\tA"
msgstr "Adaugă Arie paduri\tA"

#: flatcamGUI/FlatCAMGUI.py:503
msgid "Add Track\tT"
msgstr "Adaugă Traseu\tA"

#: flatcamGUI/FlatCAMGUI.py:505
msgid "Add Region\tN"
msgstr "Adaugă Regiune\tN"

#: flatcamGUI/FlatCAMGUI.py:509
msgid "Poligonize\tALT+N"
msgstr "Poligonizare\tALT+N"

#: flatcamGUI/FlatCAMGUI.py:511
msgid "Add SemiDisc\tE"
msgstr "Adaugă SemiDisc\tE"

#: flatcamGUI/FlatCAMGUI.py:512
msgid "Add Disc\tD"
msgstr "Adaugă Disc\tD"

#: flatcamGUI/FlatCAMGUI.py:514
msgid "Buffer\tB"
msgstr "Bufer\tB"

#: flatcamGUI/FlatCAMGUI.py:515
msgid "Scale\tS"
msgstr "Scalare\tS"

#: flatcamGUI/FlatCAMGUI.py:517
msgid "Mark Area\tALT+A"
msgstr "Marchează aria\tALT+A"

#: flatcamGUI/FlatCAMGUI.py:519
msgid "Eraser\tCTRL+E"
msgstr "Radieră\tCTRL+E"

#: flatcamGUI/FlatCAMGUI.py:521
msgid "Transform\tALT+R"
msgstr "Unealta Transformare\tALT+R"

#: flatcamGUI/FlatCAMGUI.py:545
msgid "Enable Plot"
msgstr "Activează Afișare"

#: flatcamGUI/FlatCAMGUI.py:546
msgid "Disable Plot"
msgstr "Dezactivează Afișare"

#: flatcamGUI/FlatCAMGUI.py:548
msgid "Generate CNC"
msgstr "Generează CNC"

#: flatcamGUI/FlatCAMGUI.py:549
msgid "View Source"
msgstr "Vizualiz. Sursa"

#: flatcamGUI/FlatCAMGUI.py:551 flatcamGUI/FlatCAMGUI.py:1791
msgid "Edit"
msgstr "Editează"

#: flatcamGUI/FlatCAMGUI.py:557 flatcamGUI/FlatCAMGUI.py:1797
#: flatcamTools/ToolProperties.py:24
msgid "Properties"
msgstr "Proprietati"

#: flatcamGUI/FlatCAMGUI.py:586
msgid "File Toolbar"
msgstr "Toolbar Fişiere"

#: flatcamGUI/FlatCAMGUI.py:590
msgid "Edit Toolbar"
msgstr "Toolbar Editare"

#: flatcamGUI/FlatCAMGUI.py:594
msgid "View Toolbar"
msgstr "Toolbar Vizualizare"

#: flatcamGUI/FlatCAMGUI.py:598
msgid "Shell Toolbar"
msgstr "Toolbar Linie de comanda"

#: flatcamGUI/FlatCAMGUI.py:602
msgid "Tools Toolbar"
msgstr "Toolbar Unelte"

#: flatcamGUI/FlatCAMGUI.py:606
msgid "Excellon Editor Toolbar"
msgstr "Toolbar Editor Excellon"

#: flatcamGUI/FlatCAMGUI.py:612
msgid "Geometry Editor Toolbar"
msgstr "Toolbar Editor Geometrii"

#: flatcamGUI/FlatCAMGUI.py:616
msgid "Gerber Editor Toolbar"
msgstr "Toolbar Editor Gerber"

#: flatcamGUI/FlatCAMGUI.py:620
msgid "Grid Toolbar"
msgstr "Toolbar Grid-uri"

#: flatcamGUI/FlatCAMGUI.py:639 flatcamGUI/FlatCAMGUI.py:2078
msgid "Open project"
msgstr "Încarcă Proiect"

#: flatcamGUI/FlatCAMGUI.py:640 flatcamGUI/FlatCAMGUI.py:2079
msgid "Save project"
msgstr "Salvează Proiect"

#: flatcamGUI/FlatCAMGUI.py:643 flatcamGUI/FlatCAMGUI.py:2082
msgid "New Blank Geometry"
msgstr "Geometrie Noua (goală)"

#: flatcamGUI/FlatCAMGUI.py:644
msgid "New Blank Gerber"
msgstr "Gerber Nou (gol)"

#: flatcamGUI/FlatCAMGUI.py:645 flatcamGUI/FlatCAMGUI.py:2083
msgid "New Blank Excellon"
msgstr "Excellon nou (gol)"

#: flatcamGUI/FlatCAMGUI.py:649 flatcamGUI/FlatCAMGUI.py:2087
msgid "Save Object and close the Editor"
msgstr "Salvează Obiectul și inchide Editorul"

#: flatcamGUI/FlatCAMGUI.py:653 flatcamGUI/FlatCAMGUI.py:2091
msgid "&Delete"
msgstr "&Șterge"

#: flatcamGUI/FlatCAMGUI.py:656 flatcamGUI/FlatCAMGUI.py:2094
msgid "&Replot"
msgstr "&Reafișare"

#: flatcamGUI/FlatCAMGUI.py:657 flatcamGUI/FlatCAMGUI.py:2095
msgid "&Clear plot"
msgstr "&Șterge Afișare"

#: flatcamGUI/FlatCAMGUI.py:658 flatcamGUI/FlatCAMGUI.py:1324
#: flatcamGUI/FlatCAMGUI.py:2096
msgid "Zoom In"
msgstr "Marire"

#: flatcamGUI/FlatCAMGUI.py:659 flatcamGUI/FlatCAMGUI.py:1324
#: flatcamGUI/FlatCAMGUI.py:2097
msgid "Zoom Out"
msgstr "Micsorare"

#: flatcamGUI/FlatCAMGUI.py:660 flatcamGUI/FlatCAMGUI.py:1323
#: flatcamGUI/FlatCAMGUI.py:1728 flatcamGUI/FlatCAMGUI.py:2098
msgid "Zoom Fit"
msgstr "Marire și ajustare"

#: flatcamGUI/FlatCAMGUI.py:665 flatcamGUI/FlatCAMGUI.py:2103
msgid "&Command Line"
msgstr "&Linie de comanda"

#: flatcamGUI/FlatCAMGUI.py:671 flatcamGUI/FlatCAMGUI.py:2109
msgid "2Sided Tool"
msgstr "Unealta 2-fețe"

#: flatcamGUI/FlatCAMGUI.py:672 flatcamGUI/FlatCAMGUI.py:2110
msgid "&Cutout Tool"
msgstr "Unealta Decupare"

#: flatcamGUI/FlatCAMGUI.py:673 flatcamGUI/FlatCAMGUI.py:2111
#: flatcamGUI/ObjectUI.py:456 flatcamTools/ToolNonCopperClear.py:546
msgid "NCC Tool"
msgstr "Unealta NCC"

#: flatcamGUI/FlatCAMGUI.py:677 flatcamGUI/FlatCAMGUI.py:2115
msgid "Panel Tool"
msgstr "Unealta Panel"

#: flatcamGUI/FlatCAMGUI.py:678 flatcamGUI/FlatCAMGUI.py:2116
#: flatcamTools/ToolFilm.py:209
msgid "Film Tool"
msgstr "Unealta Film"

#: flatcamGUI/FlatCAMGUI.py:679 flatcamGUI/FlatCAMGUI.py:2118
#: flatcamTools/ToolSolderPaste.py:455
msgid "SolderPaste Tool"
msgstr "Unealta Dispenser SP"

#: flatcamGUI/FlatCAMGUI.py:680 flatcamGUI/FlatCAMGUI.py:2119
#: flatcamTools/ToolSub.py:28
msgid "Substract Tool"
msgstr "Unealta Scădere"

#: flatcamGUI/FlatCAMGUI.py:684 flatcamGUI/FlatCAMGUI.py:1329
#: flatcamGUI/FlatCAMGUI.py:2124
msgid "Calculators Tool"
msgstr "Unealta Calculatoare"

#: flatcamGUI/FlatCAMGUI.py:688 flatcamGUI/FlatCAMGUI.py:705
#: flatcamGUI/FlatCAMGUI.py:739 flatcamGUI/FlatCAMGUI.py:2128
#: flatcamGUI/FlatCAMGUI.py:2181
msgid "Select"
msgstr "Selectează"

#: flatcamGUI/FlatCAMGUI.py:689 flatcamGUI/FlatCAMGUI.py:2129
msgid "Add Drill Hole"
msgstr "Adaugă o Găurire"

#: flatcamGUI/FlatCAMGUI.py:691 flatcamGUI/FlatCAMGUI.py:2131
msgid "Add Drill Hole Array"
msgstr "Adaugă o arie de Găuriri"

#: flatcamGUI/FlatCAMGUI.py:692 flatcamGUI/FlatCAMGUI.py:1583
#: flatcamGUI/FlatCAMGUI.py:1783 flatcamGUI/FlatCAMGUI.py:2133
msgid "Add Slot"
msgstr "Adaugă Slot"

#: flatcamGUI/FlatCAMGUI.py:694 flatcamGUI/FlatCAMGUI.py:1582
#: flatcamGUI/FlatCAMGUI.py:1784 flatcamGUI/FlatCAMGUI.py:2135
msgid "Add Slot Array"
msgstr "Adaugă o Arie sloturi"

#: flatcamGUI/FlatCAMGUI.py:695 flatcamGUI/FlatCAMGUI.py:1786
#: flatcamGUI/FlatCAMGUI.py:2132
msgid "Resize Drill"
msgstr "Redimens. Găurire"

#: flatcamGUI/FlatCAMGUI.py:698 flatcamGUI/FlatCAMGUI.py:2138
msgid "Copy Drill"
msgstr "Copiază Găurire"

#: flatcamGUI/FlatCAMGUI.py:699 flatcamGUI/FlatCAMGUI.py:2140
msgid "Delete Drill"
msgstr "Șterge Găurire"

#: flatcamGUI/FlatCAMGUI.py:702 flatcamGUI/FlatCAMGUI.py:2143
msgid "Move Drill"
msgstr "Muta Găurire"

#: flatcamGUI/FlatCAMGUI.py:706 flatcamGUI/FlatCAMGUI.py:2147
msgid "Add Circle"
msgstr "Adaugă Cerc"

#: flatcamGUI/FlatCAMGUI.py:707 flatcamGUI/FlatCAMGUI.py:2148
msgid "Add Arc"
msgstr "Adaugă Arc"

#: flatcamGUI/FlatCAMGUI.py:709 flatcamGUI/FlatCAMGUI.py:2150
msgid "Add Rectangle"
msgstr "Adaugă Patrulater"

#: flatcamGUI/FlatCAMGUI.py:712 flatcamGUI/FlatCAMGUI.py:2153
msgid "Add Path"
msgstr "Adaugă Cale"

#: flatcamGUI/FlatCAMGUI.py:713 flatcamGUI/FlatCAMGUI.py:2155
msgid "Add Polygon"
msgstr "Adaugă Poligon"

#: flatcamGUI/FlatCAMGUI.py:715 flatcamGUI/FlatCAMGUI.py:2157
msgid "Add Text"
msgstr "Adaugă Text"

#: flatcamGUI/FlatCAMGUI.py:716 flatcamGUI/FlatCAMGUI.py:2158
msgid "Add Buffer"
msgstr "Adaugă Bufer"

#: flatcamGUI/FlatCAMGUI.py:717 flatcamGUI/FlatCAMGUI.py:2159
msgid "Paint Shape"
msgstr "Paint o forma"

#: flatcamGUI/FlatCAMGUI.py:718 flatcamGUI/FlatCAMGUI.py:756
#: flatcamGUI/FlatCAMGUI.py:1745 flatcamGUI/FlatCAMGUI.py:1773
#: flatcamGUI/FlatCAMGUI.py:2160 flatcamGUI/FlatCAMGUI.py:2197
msgid "Eraser"
msgstr "Stergere Selectivă"

#: flatcamGUI/FlatCAMGUI.py:721 flatcamGUI/FlatCAMGUI.py:2163
msgid "Polygon Union"
msgstr "Uniune Poligoane"

#: flatcamGUI/FlatCAMGUI.py:723 flatcamGUI/FlatCAMGUI.py:2165
msgid "Polygon Intersection"
msgstr "Intersecţie Poligoane"

#: flatcamGUI/FlatCAMGUI.py:725 flatcamGUI/FlatCAMGUI.py:2167
msgid "Polygon Subtraction"
msgstr "Substracţie Poligoane"

#: flatcamGUI/FlatCAMGUI.py:728 flatcamGUI/FlatCAMGUI.py:2170
msgid "Cut Path"
msgstr "Taie Cale"

#: flatcamGUI/FlatCAMGUI.py:729
msgid "Copy Shape(s)"
msgstr "Copiază forme geo."

#: flatcamGUI/FlatCAMGUI.py:732
msgid "Delete Shape '-'"
msgstr "Șterge forme geo."

#: flatcamGUI/FlatCAMGUI.py:734 flatcamGUI/FlatCAMGUI.py:763
#: flatcamGUI/FlatCAMGUI.py:1752 flatcamGUI/FlatCAMGUI.py:1777
#: flatcamGUI/FlatCAMGUI.py:2175 flatcamGUI/FlatCAMGUI.py:2204
msgid "Transformations"
msgstr "Transformări"

#: flatcamGUI/FlatCAMGUI.py:736
msgid "Move Objects "
msgstr "Mută Obiecte "

#: flatcamGUI/FlatCAMGUI.py:740 flatcamGUI/FlatCAMGUI.py:1693
#: flatcamGUI/FlatCAMGUI.py:2182
msgid "Add Pad"
msgstr "Adaugă Pad"

#: flatcamGUI/FlatCAMGUI.py:742 flatcamGUI/FlatCAMGUI.py:1694
#: flatcamGUI/FlatCAMGUI.py:2184
msgid "Add Track"
msgstr "Adaugă Traseu"

#: flatcamGUI/FlatCAMGUI.py:743 flatcamGUI/FlatCAMGUI.py:1693
#: flatcamGUI/FlatCAMGUI.py:2185
msgid "Add Region"
msgstr "Adaugă Regiune"

#: flatcamGUI/FlatCAMGUI.py:745 flatcamGUI/FlatCAMGUI.py:1765
#: flatcamGUI/FlatCAMGUI.py:2187
msgid "Poligonize"
msgstr "Poligonizare"

#: flatcamGUI/FlatCAMGUI.py:747 flatcamGUI/FlatCAMGUI.py:1766
#: flatcamGUI/FlatCAMGUI.py:2189
msgid "SemiDisc"
msgstr "SemiDisc"

#: flatcamGUI/FlatCAMGUI.py:748 flatcamGUI/FlatCAMGUI.py:1767
#: flatcamGUI/FlatCAMGUI.py:2190
msgid "Disc"
msgstr "Disc"

#: flatcamGUI/FlatCAMGUI.py:754 flatcamGUI/FlatCAMGUI.py:1772
#: flatcamGUI/FlatCAMGUI.py:2196
msgid "Mark Area"
msgstr "Marc. aria"

#: flatcamGUI/FlatCAMGUI.py:765 flatcamGUI/FlatCAMGUI.py:1693
#: flatcamGUI/FlatCAMGUI.py:1755 flatcamGUI/FlatCAMGUI.py:1796
#: flatcamGUI/FlatCAMGUI.py:2206 flatcamTools/ToolMove.py:26
msgid "Move"
msgstr "Mutare"

#: flatcamGUI/FlatCAMGUI.py:771 flatcamGUI/FlatCAMGUI.py:2212
msgid "Snap to grid"
msgstr "Lipire la grid"

#: flatcamGUI/FlatCAMGUI.py:774 flatcamGUI/FlatCAMGUI.py:2215
msgid "Grid X snapping distance"
msgstr "Distanta de lipire la grid pe axa X"

#: flatcamGUI/FlatCAMGUI.py:779 flatcamGUI/FlatCAMGUI.py:2220
msgid "Grid Y snapping distance"
msgstr "Distanta de lipire la grid pe axa Y"

#: flatcamGUI/FlatCAMGUI.py:785 flatcamGUI/FlatCAMGUI.py:2226
msgid ""
"When active, value on Grid_X\n"
"is copied to the Grid_Y value."
msgstr ""
"Când este activ, valoarea de pe Grid_X\n"
"este copiata și in Grid_Y."

#: flatcamGUI/FlatCAMGUI.py:791 flatcamGUI/FlatCAMGUI.py:2232
msgid "Snap to corner"
msgstr "Lipire la colt"

#: flatcamGUI/FlatCAMGUI.py:795 flatcamGUI/FlatCAMGUI.py:2236
#: flatcamGUI/PreferencesUI.py:278
msgid "Max. magnet distance"
msgstr "Distanta magnetica maxima"

#: flatcamGUI/FlatCAMGUI.py:822 flatcamGUI/FlatCAMGUI.py:1722
msgid "Project"
msgstr "Proiect"

#: flatcamGUI/FlatCAMGUI.py:832
msgid "Selected"
msgstr "Selectat"

#: flatcamGUI/FlatCAMGUI.py:851 flatcamGUI/FlatCAMGUI.py:859
msgid "Plot Area"
msgstr "Arie Afișare"

#: flatcamGUI/FlatCAMGUI.py:885
msgid "General"
msgstr "General"

#: flatcamGUI/FlatCAMGUI.py:894
msgid "APP.  DEFAULTS"
msgstr "Default for App"

#: flatcamGUI/FlatCAMGUI.py:895
msgid "PROJ. OPTIONS "
msgstr "Opțiuni Proiect "

#: flatcamGUI/FlatCAMGUI.py:907 flatcamTools/ToolDblSided.py:47
msgid "GERBER"
msgstr "GERBER"

#: flatcamGUI/FlatCAMGUI.py:917 flatcamTools/ToolDblSided.py:71
msgid "EXCELLON"
msgstr "EXCELLON"

#: flatcamGUI/FlatCAMGUI.py:927 flatcamTools/ToolDblSided.py:95
msgid "GEOMETRY"
msgstr "GEOMETRIE"

#: flatcamGUI/FlatCAMGUI.py:937
msgid "CNC-JOB"
msgstr "CNCJob"

#: flatcamGUI/FlatCAMGUI.py:946 flatcamGUI/ObjectUI.py:445
msgid "TOOLS"
msgstr "Unelte"

#: flatcamGUI/FlatCAMGUI.py:956
msgid "UTILITIES"
msgstr "UTILITARE"

#: flatcamGUI/FlatCAMGUI.py:973
msgid "Import Preferences"
msgstr "Importa Preferințele"

#: flatcamGUI/FlatCAMGUI.py:976
msgid ""
"Import a full set of FlatCAM settings from a file\n"
"previously saved on HDD.\n"
"\n"
"FlatCAM automatically save a 'factory_defaults' file\n"
"on the first start. Do not delete that file."
msgstr ""
"Importa un set complet de setări ale FlatCAM dintr-un fişier\n"
"care a fost anterior salvat pe HDD..\n"
"\n"
"FlatCAM salvează automat un fişier numit 'factory_defaults'\n"
"la prima pornire. Nu șterge acel fişier."

#: flatcamGUI/FlatCAMGUI.py:983
msgid "Export Preferences"
msgstr "Exporta Preferințele"

#: flatcamGUI/FlatCAMGUI.py:986
msgid ""
"Export a full set of FlatCAM settings in a file\n"
"that is saved on HDD."
msgstr ""
"Exporta un set complet de setări ale FlatCAM\n"
"intr-un fişier care se salvează pe HDD."

#: flatcamGUI/FlatCAMGUI.py:991
msgid "Open Pref Folder"
msgstr "Deschide Pref Dir"

#: flatcamGUI/FlatCAMGUI.py:994
msgid "Open the folder where FlatCAM save the preferences files."
msgstr "Deschide directorul unde FlatCAM salvează fişierele cu setări."

#: flatcamGUI/FlatCAMGUI.py:1005
msgid ""
"Save the current settings in the 'current_defaults' file\n"
"which is the file storing the working default preferences."
msgstr ""
"Salvează setările curente in fişierul numit: 'current_defaults'\n"
"fişier care este cel unde se salvează preferințele cu care se va lucra."

#: flatcamGUI/FlatCAMGUI.py:1318
msgid "SHOW SHORTCUT LIST"
msgstr "ARATA LISTA DE TASTE SHORTCUT"

#: flatcamGUI/FlatCAMGUI.py:1318
msgid "Switch to Project Tab"
msgstr "Treci la Tab-ul Proiect"

#: flatcamGUI/FlatCAMGUI.py:1318
msgid "Switch to Selected Tab"
msgstr "Treci la Tab-ul Selectat"

#: flatcamGUI/FlatCAMGUI.py:1319
msgid "Switch to Tool Tab"
msgstr "Treci la Tab-ul 'Unealta'"

#: flatcamGUI/FlatCAMGUI.py:1320
msgid "New Gerber"
msgstr "Gerber Nou"

#: flatcamGUI/FlatCAMGUI.py:1320
msgid "Edit Object (if selected)"
msgstr "Editeaza obiectul (daca este selectat)"

#: flatcamGUI/FlatCAMGUI.py:1320
msgid "Jump to Coordinates"
msgstr "Sari la Coordonatele"

#: flatcamGUI/FlatCAMGUI.py:1321
msgid "New Excellon"
msgstr "Excellon nou"

#: flatcamGUI/FlatCAMGUI.py:1321
msgid "Move Obj"
msgstr "Mută Obiecte"

#: flatcamGUI/FlatCAMGUI.py:1321
msgid "New Geometry"
msgstr "Geometrie Noua"

#: flatcamGUI/FlatCAMGUI.py:1321
msgid "Set Origin"
msgstr "Setează Originea"

#: flatcamGUI/FlatCAMGUI.py:1321
msgid "Change Units"
msgstr "Comută Unitati"

#: flatcamGUI/FlatCAMGUI.py:1322
msgid "Open Properties Tool"
msgstr "Deschide Unealta Proprietati"

#: flatcamGUI/FlatCAMGUI.py:1322
msgid "Rotate by 90 degree CW"
msgstr "Roteste cu 90 grade CW"

#: flatcamGUI/FlatCAMGUI.py:1322
msgid "Shell Toggle"
msgstr "Comuta Linie de comanda"

#: flatcamGUI/FlatCAMGUI.py:1323
msgid ""
"Add a Tool (when in Geometry Selected Tab or in Tools NCC or Tools Paint)"
msgstr ""
"Adaugă o Unealtă (cand ne aflam in tab-ul Selected al Geometriei sau in "
"Unealta NCC sau in unealta Paint)"

#: flatcamGUI/FlatCAMGUI.py:1324
msgid "Flip on X_axis"
msgstr "Oglindește pe axa X"

#: flatcamGUI/FlatCAMGUI.py:1324
msgid "Flip on Y_axis"
msgstr "Oglindește pe axa Y"

#: flatcamGUI/FlatCAMGUI.py:1324
msgid "Select All"
msgstr "Selectează toate"

#: flatcamGUI/FlatCAMGUI.py:1324
msgid "Copy Obj"
msgstr "Copiază Obiecte"

#: flatcamGUI/FlatCAMGUI.py:1325
msgid "Open Excellon File"
msgstr "Încarcă un fisier Excellon"

#: flatcamGUI/FlatCAMGUI.py:1325
msgid "Open Gerber File"
msgstr "Încarcă un fisier Gerber"

#: flatcamGUI/FlatCAMGUI.py:1325
msgid "New Project"
msgstr "Un Nou Project"

#: flatcamGUI/FlatCAMGUI.py:1325 flatcamGUI/FlatCAMGUI.py:1507
msgid "Measurement Tool"
msgstr "Unealta Măsuratoare"

#: flatcamGUI/FlatCAMGUI.py:1326
msgid "Save Project As"
msgstr "Salvează Proiectul ca"

#: flatcamGUI/FlatCAMGUI.py:1326
msgid "Toggle Plot Area"
msgstr "Comută Aria de Afișare"

#: flatcamGUI/FlatCAMGUI.py:1326
msgid "Copy Obj_Name"
msgstr "Copiază Nume Obiect"

#: flatcamGUI/FlatCAMGUI.py:1327
msgid "Toggle Code Editor"
msgstr "Comută Editorul de cod"

#: flatcamGUI/FlatCAMGUI.py:1327
msgid "Toggle the axis"
msgstr "Comută Reprezentare Axe"

#: flatcamGUI/FlatCAMGUI.py:1327
msgid "Open Preferences Window"
msgstr "Deschide Preferințe"

#: flatcamGUI/FlatCAMGUI.py:1328
msgid "Rotate by 90 degree CCW"
msgstr "Roteste cu 90 grade CCW"

#: flatcamGUI/FlatCAMGUI.py:1328
msgid "Run a Script"
msgstr "Rulează TCL script"

#: flatcamGUI/FlatCAMGUI.py:1328
msgid "Toggle the workspace"
msgstr "Comută Suprafata de lucru"

#: flatcamGUI/FlatCAMGUI.py:1328
msgid "Skew on X axis"
msgstr "Deformare pe axa X"

#: flatcamGUI/FlatCAMGUI.py:1329
msgid "Skew on Y axis"
msgstr "Deformare pe axa Y"

#: flatcamGUI/FlatCAMGUI.py:1329
msgid "2-Sided PCB Tool"
msgstr "Unealta 2-fețe"

#: flatcamGUI/FlatCAMGUI.py:1329
msgid "Solder Paste Dispensing Tool"
msgstr "Unealta DispensorPF"

#: flatcamGUI/FlatCAMGUI.py:1330
msgid "Film PCB Tool"
msgstr "Unealta Film"

#: flatcamGUI/FlatCAMGUI.py:1330
msgid "Non-Copper Clearing Tool"
msgstr "Curățăre Non-Cupru"

#: flatcamGUI/FlatCAMGUI.py:1331
msgid "Paint Area Tool"
msgstr "Unealta Paint"

#: flatcamGUI/FlatCAMGUI.py:1331 flatcamTools/ToolPDF.py:38
msgid "PDF Import Tool"
msgstr "Unealta import PDF"

#: flatcamGUI/FlatCAMGUI.py:1331
msgid "Transformations Tool"
msgstr "Unealta Transformări"

#: flatcamGUI/FlatCAMGUI.py:1331
msgid "View File Source"
msgstr "Vizualiz. Cod Sursă"

#: flatcamGUI/FlatCAMGUI.py:1332
msgid "Cutout PCB Tool"
msgstr "Unealta Decupare"

#: flatcamGUI/FlatCAMGUI.py:1332
msgid "Enable all Plots"
msgstr "Activează Afișare pt Tot"

#: flatcamGUI/FlatCAMGUI.py:1332
msgid "Disable all Plots"
msgstr "Dezactivează Afișare pt Tot"

#: flatcamGUI/FlatCAMGUI.py:1332
msgid "Disable Non-selected Plots"
msgstr "Dezactivează ne-selectate"

#: flatcamGUI/FlatCAMGUI.py:1333
msgid "Toggle Full Screen"
msgstr "Comută FullScreen"

#: flatcamGUI/FlatCAMGUI.py:1333
msgid "Abort current task (gracefully)"
msgstr "Renutna la task"

#: flatcamGUI/FlatCAMGUI.py:1333
msgid "Open Online Manual"
msgstr "Deschide Manualul Online"

#: flatcamGUI/FlatCAMGUI.py:1334
msgid "Open Online Tutorials"
msgstr "Deschide Tutoriale Online"

#: flatcamGUI/FlatCAMGUI.py:1334
msgid "Refresh Plots"
msgstr "Improspatare Afișare"

#: flatcamGUI/FlatCAMGUI.py:1334 flatcamTools/ToolSolderPaste.py:412
msgid "Delete Object"
msgstr "Șterge Obiectul"

#: flatcamGUI/FlatCAMGUI.py:1334
msgid "Alternate: Delete Tool"
msgstr "Alternativ: Șterge Unealta"

#: flatcamGUI/FlatCAMGUI.py:1335
msgid "(left to Key_1)Toogle Notebook Area (Left Side)"
msgstr "(in stanga tasta 1) Comuta aria Notebook (partea stanga)"

#: flatcamGUI/FlatCAMGUI.py:1335
msgid "En(Dis)able Obj Plot"
msgstr "(Dez)activează Afișare"

#: flatcamGUI/FlatCAMGUI.py:1336
msgid "Deselects all objects"
msgstr "Deselectează toate obiectele"

#: flatcamGUI/FlatCAMGUI.py:1350
msgid "Editor Shortcut list"
msgstr "Lista de shortcut-uri"

#: flatcamGUI/FlatCAMGUI.py:1500
msgid "GEOMETRY EDITOR"
msgstr "EDITOR GEOMETRIE"

#: flatcamGUI/FlatCAMGUI.py:1500
msgid "Draw an Arc"
msgstr "Deseneaza un Arc"

#: flatcamGUI/FlatCAMGUI.py:1500
msgid "Copy Geo Item"
msgstr "Copiază Geo"

#: flatcamGUI/FlatCAMGUI.py:1501
msgid "Within Add Arc will toogle the ARC direction: CW or CCW"
msgstr "In cadrul 'Aadauga Arc' va comuta intre directiile arcului: CW sau CCW"

#: flatcamGUI/FlatCAMGUI.py:1501
msgid "Polygon Intersection Tool"
msgstr "Unealta Intersecţie Poligoane"

#: flatcamGUI/FlatCAMGUI.py:1502
msgid "Geo Paint Tool"
msgstr "Unealta Paint Geo"

#: flatcamGUI/FlatCAMGUI.py:1502 flatcamGUI/FlatCAMGUI.py:1582
#: flatcamGUI/FlatCAMGUI.py:1693
msgid "Jump to Location (x, y)"
msgstr "Sari la Locaţia (x, y)"

#: flatcamGUI/FlatCAMGUI.py:1502
msgid "Toggle Corner Snap"
msgstr "Comută lipire colt"

#: flatcamGUI/FlatCAMGUI.py:1502
msgid "Move Geo Item"
msgstr "Muta El. Geo"

#: flatcamGUI/FlatCAMGUI.py:1503
msgid "Within Add Arc will cycle through the ARC modes"
msgstr "In cadrul 'Adauga Arc' va trece circular prin tipurile de Arc"

#: flatcamGUI/FlatCAMGUI.py:1503
msgid "Draw a Polygon"
msgstr "Deseneaza un Poligon"

#: flatcamGUI/FlatCAMGUI.py:1503
msgid "Draw a Circle"
msgstr "Deseneaza un Cerc"

#: flatcamGUI/FlatCAMGUI.py:1504
msgid "Draw a Path"
msgstr "Deseneaza un Traseu"

#: flatcamGUI/FlatCAMGUI.py:1504
msgid "Draw Rectangle"
msgstr "Deseneaza un Patrulater"

#: flatcamGUI/FlatCAMGUI.py:1504
msgid "Polygon Subtraction Tool"
msgstr "Unealta Substracţie Poligoane"

#: flatcamGUI/FlatCAMGUI.py:1504
msgid "Add Text Tool"
msgstr "Unealta Adaugare Text"

#: flatcamGUI/FlatCAMGUI.py:1505
msgid "Polygon Union Tool"
msgstr "Unealta Uniune Poligoane"

#: flatcamGUI/FlatCAMGUI.py:1505
msgid "Flip shape on X axis"
msgstr "Oglindește pe axa X"

#: flatcamGUI/FlatCAMGUI.py:1505
msgid "Flip shape on Y axis"
msgstr "Oglindește pe axa Y"

#: flatcamGUI/FlatCAMGUI.py:1505
msgid "Skew shape on X axis"
msgstr "Deformare pe axa X"

#: flatcamGUI/FlatCAMGUI.py:1506
msgid "Skew shape on Y axis"
msgstr "Deformare pe axa Y"

#: flatcamGUI/FlatCAMGUI.py:1506
msgid "Editor Transformation Tool"
msgstr "Unealta Transformare in Editor"

#: flatcamGUI/FlatCAMGUI.py:1506
msgid "Offset shape on X axis"
msgstr "Ofset pe axa X"

#: flatcamGUI/FlatCAMGUI.py:1507
msgid "Offset shape on Y axis"
msgstr "Ofset pe axa Y"

#: flatcamGUI/FlatCAMGUI.py:1507 flatcamGUI/FlatCAMGUI.py:1584
#: flatcamGUI/FlatCAMGUI.py:1697
msgid "Save Object and Exit Editor"
msgstr "Salvează Obiectul și inchide Editorul"

#: flatcamGUI/FlatCAMGUI.py:1507
msgid "Polygon Cut Tool"
msgstr "Unealta Taiere Poligoane"

#: flatcamGUI/FlatCAMGUI.py:1508
msgid "Rotate Geometry"
msgstr "Roteste Geometrie"

#: flatcamGUI/FlatCAMGUI.py:1508
msgid "Finish drawing for certain tools"
msgstr "Termina de desenat (pt anumite unelte)"

#: flatcamGUI/FlatCAMGUI.py:1508 flatcamGUI/FlatCAMGUI.py:1584
#: flatcamGUI/FlatCAMGUI.py:1696
msgid "Abort and return to Select"
msgstr "Renutna si intoarce-te la Selectie"

#: flatcamGUI/FlatCAMGUI.py:1509 flatcamGUI/FlatCAMGUI.py:2173
msgid "Delete Shape"
msgstr "Șterge forme geo"

#: flatcamGUI/FlatCAMGUI.py:1581
msgid "EXCELLON EDITOR"
msgstr "EDITOR EXCELLON"

#: flatcamGUI/FlatCAMGUI.py:1581
msgid "Copy Drill(s)"
msgstr "Copiaza Găurire"

#: flatcamGUI/FlatCAMGUI.py:1581 flatcamGUI/FlatCAMGUI.py:1780
msgid "Add Drill"
msgstr "Adaugă găurire"

#: flatcamGUI/FlatCAMGUI.py:1582
msgid "Move Drill(s)"
msgstr "Muta Găuri"

#: flatcamGUI/FlatCAMGUI.py:1583
msgid "Add a new Tool"
msgstr "Adaugă Unealta Noua"

#: flatcamGUI/FlatCAMGUI.py:1583
msgid "Delete Drill(s)"
msgstr "Șterge Găuri"

#: flatcamGUI/FlatCAMGUI.py:1583
msgid "Alternate: Delete Tool(s)"
msgstr "Alternativ: Șterge Unealta"

#: flatcamGUI/FlatCAMGUI.py:1692
msgid "GERBER EDITOR"
msgstr "EDITOR GERBER"

#: flatcamGUI/FlatCAMGUI.py:1692
msgid "Add Disc"
msgstr "Adaugă Disc"

#: flatcamGUI/FlatCAMGUI.py:1692
msgid "Add SemiDisc"
msgstr "Adaugă SemiDisc"

#: flatcamGUI/FlatCAMGUI.py:1694
msgid "Within Track & Region Tools will cycle in REVERSE the bend modes"
msgstr ""
"In cadrul uneltelor Traseu si Regiune va trece circular in Revers prin "
"modurile de indoire"

#: flatcamGUI/FlatCAMGUI.py:1695
msgid "Within Track & Region Tools will cycle FORWARD the bend modes"
msgstr ""
"In cadrul uneltelor Traseu si Regiune va trece circular in Avans prin "
"modurile de indoire"

#: flatcamGUI/FlatCAMGUI.py:1696
msgid "Alternate: Delete Apertures"
msgstr "Alternativ: Șterge Apertură"

#: flatcamGUI/FlatCAMGUI.py:1696
msgid "Eraser Tool"
msgstr "Unealta Stergere"

#: flatcamGUI/FlatCAMGUI.py:1697 flatcamGUI/PreferencesUI.py:1603
msgid "Mark Area Tool"
msgstr "Unealta de Marc. Arie"

#: flatcamGUI/FlatCAMGUI.py:1697
msgid "Poligonize Tool"
msgstr "Unealta Poligonizare"

#: flatcamGUI/FlatCAMGUI.py:1697
msgid "Transformation Tool"
msgstr "Unealta Transformare"

#: flatcamGUI/FlatCAMGUI.py:1713
msgid "Toggle Visibility"
msgstr "Comută Vizibilitate"

#: flatcamGUI/FlatCAMGUI.py:1714
msgid "Toggle Panel"
msgstr "Comută Panel"

#: flatcamGUI/FlatCAMGUI.py:1717
msgid "New"
msgstr "Nou"

#: flatcamGUI/FlatCAMGUI.py:1718
msgid "Geometry"
msgstr "Geometrie"

#: flatcamGUI/FlatCAMGUI.py:1720
msgid "Excellon"
msgstr "Excellon"

#: flatcamGUI/FlatCAMGUI.py:1725
msgid "Grids"
msgstr "Grid-uri"

#: flatcamGUI/FlatCAMGUI.py:1727
msgid "View"
msgstr "Vizualizare"

#: flatcamGUI/FlatCAMGUI.py:1729
msgid "Clear Plot"
msgstr "Șterge Afișare"

#: flatcamGUI/FlatCAMGUI.py:1730
msgid "Replot"
msgstr "Reafișare"

#: flatcamGUI/FlatCAMGUI.py:1733
msgid "Geo Editor"
msgstr "Editor Geometrii"

#: flatcamGUI/FlatCAMGUI.py:1734
msgid "Path"
msgstr "Pe cale"

#: flatcamGUI/FlatCAMGUI.py:1735
msgid "Rectangle"
msgstr "Patrulater"

#: flatcamGUI/FlatCAMGUI.py:1737
msgid "Circle"
msgstr "Cerc"

#: flatcamGUI/FlatCAMGUI.py:1738
msgid "Polygon"
msgstr "Poligon"

#: flatcamGUI/FlatCAMGUI.py:1739
msgid "Arc"
msgstr "Arc"

#: flatcamGUI/FlatCAMGUI.py:1742
msgid "Text"
msgstr "Text"

#: flatcamGUI/FlatCAMGUI.py:1748
msgid "Union"
msgstr "Uniune"

#: flatcamGUI/FlatCAMGUI.py:1749
msgid "Intersection"
msgstr "Intersecţie"

#: flatcamGUI/FlatCAMGUI.py:1750
msgid "Substraction"
msgstr "Scădere"

#: flatcamGUI/FlatCAMGUI.py:1751 flatcamGUI/ObjectUI.py:1414
#: flatcamGUI/PreferencesUI.py:3006
msgid "Cut"
msgstr "Tăiere"

#: flatcamGUI/FlatCAMGUI.py:1758
msgid "Pad"
msgstr "Pad"

#: flatcamGUI/FlatCAMGUI.py:1759
msgid "Pad Array"
msgstr "Arie de paduri"

#: flatcamGUI/FlatCAMGUI.py:1762
msgid "Track"
msgstr "Traseu"

#: flatcamGUI/FlatCAMGUI.py:1763
msgid "Region"
msgstr "Regiune"

#: flatcamGUI/FlatCAMGUI.py:1779
msgid "Exc Editor"
msgstr "Editor EXC"

#: flatcamGUI/FlatCAMGUI.py:1829
msgid "Print Preview"
msgstr "Preview tiparire"

#: flatcamGUI/FlatCAMGUI.py:1830
msgid "Open a OS standard Preview Print window."
msgstr "Deschide o fereastra standard a OS cu Previzualizare Tiparire."

#: flatcamGUI/FlatCAMGUI.py:1831
msgid "Print Code"
msgstr "Tipareste Cod"

#: flatcamGUI/FlatCAMGUI.py:1832
msgid "Open a OS standard Print window."
msgstr "Deschide o fereastra standard a OS pt Tiparire."

#: flatcamGUI/FlatCAMGUI.py:1834
msgid "Find in Code"
msgstr "Cauta in Cod"

#: flatcamGUI/FlatCAMGUI.py:1835
msgid "Will search and highlight in yellow the string in the Find box."
msgstr "Va cauta si va sublinia in galben acele stringuri din campul Cautare."

#: flatcamGUI/FlatCAMGUI.py:1841
msgid "Find box. Enter here the strings to be searched in the text."
msgstr ""
"Campul Cautare. Introduceti aici acele stringuri care sa fie cautate in text."

#: flatcamGUI/FlatCAMGUI.py:1843
msgid "Replace With"
msgstr "Inlocuieste cu"

#: flatcamGUI/FlatCAMGUI.py:1844
msgid ""
"Will replace the string from the Find box with the one in the Replace box."
msgstr ""
"Va inlocui toate cuvintele gasite conform cu ce este in 'Căutare'\n"
"cu textul din casuta 'Inlocuieste'."

#: flatcamGUI/FlatCAMGUI.py:1849
msgid "String to replace the one in the Find box throughout the text."
msgstr ""
"String care sa inlocuiasca pe acele din campul 'Cautare' in cadrul textului."

#: flatcamGUI/FlatCAMGUI.py:1851 flatcamGUI/ObjectUI.py:1412
#: flatcamGUI/PreferencesUI.py:3004 flatcamGUI/PreferencesUI.py:3833
msgid "All"
msgstr "Toate"

#: flatcamGUI/FlatCAMGUI.py:1852
msgid ""
"When checked it will replace all instances in the 'Find' box\n"
"with the text in the 'Replace' box.."
msgstr ""
"Când este bifat, va inlocui toate cuvintele gasite conform cu ce este in "
"'Caută'\n"
"cu textul din casuta 'Inlocuieste'..."

#: flatcamGUI/FlatCAMGUI.py:1855
msgid "Copy All"
msgstr "Copiază tot"

#: flatcamGUI/FlatCAMGUI.py:1856
msgid "Will copy all the text in the Code Editor to the clipboard."
msgstr "Va copia textul din editorul de cod în clipboard."

#: flatcamGUI/FlatCAMGUI.py:1860
msgid "Open Code"
msgstr "Deschide Cod"

#: flatcamGUI/FlatCAMGUI.py:1861
msgid "Will open a text file in the editor."
msgstr "Va deschide un fisier text in Editor."

#: flatcamGUI/FlatCAMGUI.py:1863
msgid "Save Code"
msgstr "Salvează Cod"

#: flatcamGUI/FlatCAMGUI.py:1864
msgid "Will save the text in the editor into a file."
msgstr "Va salva textul din Editor intr-un fisier."

#: flatcamGUI/FlatCAMGUI.py:1866
msgid "Run Code"
msgstr "Ruleaza Cod"

#: flatcamGUI/FlatCAMGUI.py:1867
msgid "Will run the TCL commands found in the text file, one by one."
msgstr ""
"Va rula instructiunile/comenzile TCL care se gasesc in textul din Editor, "
"una cate una."

#: flatcamGUI/FlatCAMGUI.py:1906
msgid ""
"Relative neasurement.\n"
"Reference is last click position"
msgstr ""
"Măsurătoare relativă.\n"
"Referința este poziţia ultimului click pe canvas"

#: flatcamGUI/FlatCAMGUI.py:1912
msgid ""
"Absolute neasurement.\n"
"Reference is (X=0, Y= 0) position"
msgstr ""
"Măsurătoare absolută.\n"
"Referința este originea (0, 0)"

#: flatcamGUI/FlatCAMGUI.py:2038
msgid "Lock Toolbars"
msgstr "Blochează Toolbar-uri"

#: flatcamGUI/FlatCAMGUI.py:2146
msgid "Select 'Esc'"
msgstr "Select"

#: flatcamGUI/FlatCAMGUI.py:2171
msgid "Copy Objects"
msgstr "Copiază Obiecte"

#: flatcamGUI/FlatCAMGUI.py:2178
msgid "Move Objects"
msgstr "Mută Obiecte"

#: flatcamGUI/FlatCAMGUI.py:2649
msgid ""
"Please first select a geometry item to be cutted\n"
"then select the geometry item that will be cutted\n"
"out of the first item. In the end press ~X~ key or\n"
"the toolbar button."
msgstr ""
"Mai intai selectează o forma geometrică care trebuie tăiată\n"
"apoi selectează forma geo. tăietoare. La final apasă tasta ~X~ sau\n"
"butonul corespunzator din Toolbar."

#: flatcamGUI/FlatCAMGUI.py:2656 flatcamGUI/FlatCAMGUI.py:2794
#: flatcamGUI/FlatCAMGUI.py:2853 flatcamGUI/FlatCAMGUI.py:2873
msgid "Warning"
msgstr "Atenţie"

#: flatcamGUI/FlatCAMGUI.py:2789
msgid ""
"Please select geometry items \n"
"on which to perform Intersection Tool."
msgstr ""
"Selectează forma geometrică asupra căreia să se\n"
"aplice Unealta Intersecţie."

#: flatcamGUI/FlatCAMGUI.py:2848
msgid ""
"Please select geometry items \n"
"on which to perform Substraction Tool."
msgstr ""
"Selectează forma geometrică asupra căreia să se\n"
"aplice Unealta Substracţie."

#: flatcamGUI/FlatCAMGUI.py:2868
msgid ""
"Please select geometry items \n"
"on which to perform union."
msgstr ""
"Selectează forma geometrică asupra căreia să se\n"
"aplice Unealta Uniune."

#: flatcamGUI/FlatCAMGUI.py:2949 flatcamGUI/FlatCAMGUI.py:3164
msgid "Cancelled. Nothing selected to delete."
msgstr "Anulat. Nimic nu este selectat pentru ștergere."

#: flatcamGUI/FlatCAMGUI.py:3034 flatcamGUI/FlatCAMGUI.py:3232
msgid "Cancelled. Nothing selected to copy."
msgstr "Anulat. Nimic nu este selectat pentru copiere."

#: flatcamGUI/FlatCAMGUI.py:3081 flatcamGUI/FlatCAMGUI.py:3279
msgid "Cancelled. Nothing selected to move."
msgstr "Anulat. Nimic nu este selectat pentru mutare."

#: flatcamGUI/FlatCAMGUI.py:3305
msgid "New Tool ..."
msgstr "O noua Unealtă ..."

#: flatcamGUI/FlatCAMGUI.py:3306
msgid "Enter a Tool Diameter"
msgstr "Introduceti un Diametru de Unealtă"

#: flatcamGUI/FlatCAMGUI.py:3322
msgid "Adding Tool cancelled ..."
msgstr "Adăugarea unei unelte anulată..."

#: flatcamGUI/FlatCAMGUI.py:3365
msgid "Measurement Tool exit..."
msgstr "Măsurătoarea s-a terminat ..."

#: flatcamGUI/FlatCAMGUI.py:3502 flatcamGUI/FlatCAMGUI.py:3509
msgid "Idle."
msgstr "Inactiv."

#: flatcamGUI/FlatCAMGUI.py:3535
msgid "Application started ..."
msgstr "Aplicaţia a pornit ..."

#: flatcamGUI/FlatCAMGUI.py:3536
msgid "Hello!"
msgstr "Bună!"

#: flatcamGUI/FlatCAMGUI.py:3589
msgid "Open Project ..."
msgstr "Încarcă Project ..."

#: flatcamGUI/FlatCAMGUI.py:3614
msgid "Exit"
msgstr "Iesiere"

#: flatcamGUI/ObjectUI.py:33
msgid "FlatCAM Object"
msgstr "Obiect FlatCAM"

#: flatcamGUI/ObjectUI.py:58
msgid ""
"BASIC is suitable for a beginner. Many parameters\n"
"are hidden from the user in this mode.\n"
"ADVANCED mode will make available all parameters.\n"
"\n"
"To change the application LEVEL, go to:\n"
"Edit -> Preferences -> General and check:\n"
"'APP. LEVEL' radio button."
msgstr ""
"Modul de Bază este potrivit pt incepatori. Multi parametri sunt\n"
"ascunsi de user in acest mod.\n"
"Modul Avansat face disponibili toti parametrii programului.\n"
"\n"
"Pt a schimba modul de lucru al aplicaţiei mergi in:\n"
"Edit -> Preferințe -> General și bifează:\n"
"butonul radio: >Nivel App<."

#: flatcamGUI/ObjectUI.py:81
msgid "Change the size of the object."
msgstr "Schimbă dimensiunea obiectului."

#: flatcamGUI/ObjectUI.py:89
msgid "Factor"
msgstr "Factor"

#: flatcamGUI/ObjectUI.py:91
msgid ""
"Factor by which to multiply\n"
"geometric features of this object."
msgstr ""
"Factor cu care se multiplica \n"
"caracteristicile geometrice ale\n"
"acestui obiect."

#: flatcamGUI/ObjectUI.py:102
msgid "Perform scaling operation."
msgstr "Efectuează operatia de scalare."

#: flatcamGUI/ObjectUI.py:110
msgid "Change the position of this object."
msgstr "Schimbă poziţia acestui obiect."

#: flatcamGUI/ObjectUI.py:117
msgid "Vector"
msgstr "Vector"

#: flatcamGUI/ObjectUI.py:119
msgid ""
"Amount by which to move the object\n"
"in the x and y axes in (x, y) format."
msgstr ""
"Valoare cu cat să se deplaseze obiectul\n"
"pe axele X și /sau Y in formatul (x,y)."

#: flatcamGUI/ObjectUI.py:129
msgid "Perform the offset operation."
msgstr "Efectuează operația de Ofset."

#: flatcamGUI/ObjectUI.py:143
msgid "Gerber Object"
msgstr "Obiect Gerber"

#: flatcamGUI/ObjectUI.py:150 flatcamGUI/ObjectUI.py:566
#: flatcamGUI/ObjectUI.py:899 flatcamGUI/ObjectUI.py:1398
#: flatcamGUI/PreferencesUI.py:1058 flatcamGUI/PreferencesUI.py:1638
#: flatcamGUI/PreferencesUI.py:2586 flatcamGUI/PreferencesUI.py:2980
msgid "Plot Options"
msgstr "Opțiuni afișare"

#: flatcamGUI/ObjectUI.py:156 flatcamGUI/ObjectUI.py:567
#: flatcamGUI/PreferencesUI.py:1065 flatcamGUI/PreferencesUI.py:1650
msgid "Solid"
msgstr "Solid"

#: flatcamGUI/ObjectUI.py:158 flatcamGUI/PreferencesUI.py:1067
msgid "Solid color polygons."
msgstr "Poligoane color solide."

#: flatcamGUI/ObjectUI.py:164 flatcamGUI/PreferencesUI.py:1072
msgid "M-Color"
msgstr "M-Color"

#: flatcamGUI/ObjectUI.py:166 flatcamGUI/PreferencesUI.py:1074
msgid "Draw polygons in different colors."
msgstr ""
"Desenează poligoanele Gerber din multiple culori\n"
"alese in mod aleator."

#: flatcamGUI/ObjectUI.py:172 flatcamGUI/ObjectUI.py:605
#: flatcamGUI/PreferencesUI.py:1079 flatcamGUI/PreferencesUI.py:1644
#: flatcamGUI/PreferencesUI.py:2590
msgid "Plot"
msgstr "Afisează"

#: flatcamGUI/ObjectUI.py:174 flatcamGUI/ObjectUI.py:607
#: flatcamGUI/ObjectUI.py:945 flatcamGUI/ObjectUI.py:1508
#: flatcamGUI/PreferencesUI.py:1081 flatcamGUI/PreferencesUI.py:2592
#: flatcamGUI/PreferencesUI.py:2991
msgid "Plot (show) this object."
msgstr "Afisează (arata) acest obiect."

#: flatcamGUI/ObjectUI.py:182 flatcamGUI/ObjectUI.py:578
#: flatcamGUI/ObjectUI.py:905 flatcamGUI/ObjectUI.py:1428
msgid "Name"
msgstr "Nume"

#: flatcamGUI/ObjectUI.py:203
msgid ""
"Toggle the display of the Gerber Apertures Table.\n"
"When unchecked, it will delete all mark shapes\n"
"that are drawn on canvas."
msgstr ""
"Comută afișarea tabelei de aperturi Gerber.\n"
"Când se debifează, toate marcajele aperturilor\n"
"care sutn curent afisate, vor fi șterse."

#: flatcamGUI/ObjectUI.py:213
msgid "Mark All"
msgstr "Marc. Toate"

#: flatcamGUI/ObjectUI.py:215
msgid ""
"When checked it will display all the apertures.\n"
"When unchecked, it will delete all mark shapes\n"
"that are drawn on canvas."
msgstr ""
"Când este bifat se vor afisa toate aperturile.\n"
"Când este debifat se vor șterge toate marcajele de aperturi."

#: flatcamGUI/ObjectUI.py:243
msgid "Mark the aperture instances on canvas."
msgstr "Marchează aperturile pe canvas."

#: flatcamGUI/ObjectUI.py:250 flatcamGUI/PreferencesUI.py:1106
msgid "Isolation Routing"
msgstr "Izolare"

#: flatcamGUI/ObjectUI.py:252 flatcamGUI/PreferencesUI.py:1108
msgid ""
"Create a Geometry object with\n"
"toolpaths to cut outside polygons."
msgstr ""
"Crează un obiect tip Geometrie cu trasee\n"
"care să fie taiate in afara poligoanelor,\n"
"urmărindu-le conturul."

#: flatcamGUI/ObjectUI.py:266
msgid ""
"Diameter of the cutting tool.\n"
"If you want to have an isolation path\n"
"inside the actual shape of the Gerber\n"
"feature, use a negative value for\n"
"this parameter."
msgstr ""
"Diametrul uneltei taietoare.\n"
"Daca se dorește să se aibă o trecere de izolaţie\n"
"in interiorul poligonului Gerber (traseu), foloseşte\n"
"o valoare negativă pt acest parametru."

#: flatcamGUI/ObjectUI.py:277 flatcamGUI/PreferencesUI.py:1126
msgid "# Passes"
msgstr "# Treceri"

#: flatcamGUI/ObjectUI.py:279 flatcamGUI/PreferencesUI.py:1128
msgid ""
"Width of the isolation gap in\n"
"number (integer) of tool widths."
msgstr ""
"Lăţimea spatiului de izolare\n"
"in număr intreg de grosimi ale uneltei."

#: flatcamGUI/ObjectUI.py:288 flatcamGUI/PreferencesUI.py:1137
msgid "Pass overlap"
msgstr "Suprapunere"

#: flatcamGUI/ObjectUI.py:290 flatcamGUI/PreferencesUI.py:1139
#, python-format
msgid ""
"How much (fraction) of the tool width to overlap each tool pass.\n"
"Example:\n"
"A value here of 0.25 means an overlap of 25%% from the tool diameter found "
"above."
msgstr ""
"Cat de mult (in fractii ale diametrului uneltei) să se suprapună trecerea "
"curentă\n"
"peste cea anterioară. \n"
"Exemplu:\n"
"O valoare de 0.25 reprezinta o suprapunere de 25%% din diametrul uneltei."

#: flatcamGUI/ObjectUI.py:304 flatcamGUI/PreferencesUI.py:1152
#: flatcamGUI/PreferencesUI.py:2958 flatcamGUI/PreferencesUI.py:3349
#: flatcamTools/ToolNonCopperClear.py:147
msgid "Milling Type"
msgstr "Tip Frezare"

#: flatcamGUI/ObjectUI.py:306 flatcamGUI/PreferencesUI.py:1154
#: flatcamGUI/PreferencesUI.py:2960
msgid ""
"Milling type:\n"
"- climb / best for precision milling and to reduce tool usage\n"
"- conventional / useful when there is no backlash compensation"
msgstr ""
"Tipul de frezare:\n"
"- urcare -> potrivit pentru frezare de precizie și pt a reduce uzura "
"uneltei\n"
"- conventional -> pentru cazul când nu exista o compensare a 'backlash-ului'"

#: flatcamGUI/ObjectUI.py:310 flatcamGUI/PreferencesUI.py:1159
#: flatcamGUI/PreferencesUI.py:2964 flatcamGUI/PreferencesUI.py:3356
#: flatcamTools/ToolNonCopperClear.py:154
msgid "Climb"
msgstr "Urcare"

#: flatcamGUI/ObjectUI.py:311 flatcamGUI/PreferencesUI.py:1160
#: flatcamGUI/PreferencesUI.py:2965 flatcamGUI/PreferencesUI.py:3357
#: flatcamTools/ToolNonCopperClear.py:155
msgid "Conv."
msgstr "Conv."

#: flatcamGUI/ObjectUI.py:316 flatcamGUI/PreferencesUI.py:1164
msgid "Combine Passes"
msgstr "Combina"

#: flatcamGUI/ObjectUI.py:318 flatcamGUI/PreferencesUI.py:1166
msgid "Combine all passes into one object"
msgstr "Combina toate trecerile intr-un singur obiect"

#: flatcamGUI/ObjectUI.py:322 flatcamGUI/PreferencesUI.py:1250
msgid "\"Follow\""
msgstr "\"Urmareste\""

#: flatcamGUI/ObjectUI.py:323 flatcamGUI/PreferencesUI.py:1252
msgid ""
"Generate a 'Follow' geometry.\n"
"This means that it will cut through\n"
"the middle of the trace."
msgstr ""
"Generează o geometrie de tip 'urmăritor'.\n"
"Mai exact, in loc să se genereze un poligon se va genera o 'linie'.\n"
"In acest fel se taie prin mijlocul unui traseu și nu in jurul lui."

#: flatcamGUI/ObjectUI.py:328
msgid "Except"
msgstr "Exceptie"

#: flatcamGUI/ObjectUI.py:329
msgid ""
"When the isolation geometry is generated,\n"
"by checking this, the area of the object bellow\n"
"will be subtracted from the isolation geometry."
msgstr ""
"Cand un obiect de geometrie tip Izolare este creat,\n"
"prin bifarea aici, aria obiectului de mai jos va fi\n"
"scăzută din geometrie de tip Izolare."

#: flatcamGUI/ObjectUI.py:354 flatcamTools/ToolCutOut.py:53
#: flatcamTools/ToolNonCopperClear.py:69 flatcamTools/ToolPaint.py:68
msgid "Obj Type"
msgstr "Tip obiect"

#: flatcamGUI/ObjectUI.py:356
msgid ""
"Specify the type of object to be excepted from isolation.\n"
"It can be of type: Gerber or Geometry.\n"
"What is selected here will dictate the kind\n"
"of objects that will populate the 'Object' combobox."
msgstr ""
"Specifica obiectul care va fi exceptat de la izolare.\n"
"Poate fi de tip: Gerber sau Geometrie.\n"
"Ce se va selecta aici va controla tipul de \n"
"obiecte care vor aparea in combobox-ul\n"
"numit >Obiect<."

#: flatcamGUI/ObjectUI.py:369 flatcamTools/ToolCutOut.py:69
#: flatcamTools/ToolNonCopperClear.py:87 flatcamTools/ToolPaint.py:86
#: flatcamTools/ToolPanelize.py:71 flatcamTools/ToolPanelize.py:84
msgid "Object"
msgstr "Obiect"

#: flatcamGUI/ObjectUI.py:370
msgid "Object whose area will be removed from isolation geometry."
msgstr ""
"Obiectul a cărui suprafată va fi indepărtată din geometria tip Izolare."

#: flatcamGUI/ObjectUI.py:374
msgid "Generate Isolation Geometry"
msgstr "Creează Geometrie de Izolare"

#: flatcamGUI/ObjectUI.py:376
msgid ""
"Create a Geometry object with toolpaths to cut \n"
"isolation outside, inside or on both sides of the\n"
"object. For a Gerber object outside means outside\n"
"of the Gerber feature and inside means inside of\n"
"the Gerber feature, if possible at all. This means\n"
"that only if the Gerber feature has openings inside, they\n"
"will be isolated. If what is wanted is to cut isolation\n"
"inside the actual Gerber feature, use a negative tool\n"
"diameter above."
msgstr ""
"Crează un obiect Geometrie cu treceri taietoare pentru\n"
"a efectua o izolare in afară, in interior sau pe ambele parti\n"
"ale obiectului.\n"
"Pt un Gerber >in afară< inseamna in exteriorul elem. Gerber\n"
"(traseu, zona etc) iar >in interior< inseamna efectiv in interiorul\n"
"acelui elem. Gerber (daca poate fi posibil)."

#: flatcamGUI/ObjectUI.py:388
msgid "Buffer Solid Geometry"
msgstr "Creează Bufer Geometrie Solidă"

#: flatcamGUI/ObjectUI.py:390
msgid ""
"This button is shown only when the Gerber file\n"
"is loaded without buffering.\n"
"Clicking this will create the buffered geometry\n"
"required for isolation."
msgstr ""
"Acest control este afisat doar cand este incărcat un\n"
"fisier Gerber fără să fie buferată geometria sa.\n"
"Bifarea aici va crea această buferare care este necesară\n"
"pentru a crea geometrie de tip Izolare."

#: flatcamGUI/ObjectUI.py:397
msgid "FULL Geo"
msgstr "Geo Full"

#: flatcamGUI/ObjectUI.py:399
msgid ""
"Create the Geometry Object\n"
"for isolation routing. It contains both\n"
"the interiors and exteriors geometry."
msgstr ""
"Crează un obiect Geometrie pt izolare.\n"
"Contine atat geometriile exterioare cat și\n"
"pe cele interioare."

#: flatcamGUI/ObjectUI.py:408
msgid "Ext Geo"
msgstr "Geo Ext"

#: flatcamGUI/ObjectUI.py:410
msgid ""
"Create the Geometry Object\n"
"for isolation routing containing\n"
"only the exteriors geometry."
msgstr ""
"Crează obiectul Geometrie\n"
"pt izolare conținând doar\n"
"geometriile de exterior."

#: flatcamGUI/ObjectUI.py:417
msgid "Int Geo"
msgstr "Geo Int"

#: flatcamGUI/ObjectUI.py:419
msgid ""
"Create the Geometry Object\n"
"for isolation routing containing\n"
"only the interiors geometry."
msgstr ""
"Crează obiectul Geometrie\n"
"pt izolare conținând doar\n"
"geometriile de interior."

#: flatcamGUI/ObjectUI.py:449
msgid "Clear N-copper"
msgstr "Curăță Non-Cu"

#: flatcamGUI/ObjectUI.py:451 flatcamGUI/PreferencesUI.py:3294
msgid ""
"Create a Geometry object with\n"
"toolpaths to cut all non-copper regions."
msgstr ""
"Crează un obiect tip Geometrie cu traiectorii unealtă\n"
"care să curete de cupru toate zonele unde se dorește să nu \n"
"fie cupru."

#: flatcamGUI/ObjectUI.py:458 flatcamTools/ToolNonCopperClear.py:446
msgid ""
"Create the Geometry Object\n"
"for non-copper routing."
msgstr ""
"Crează un obiect Geometrie\n"
"pt rutare non-cupru (adica pt\n"
"curățare zone de cupru)."

#: flatcamGUI/ObjectUI.py:465
msgid "Board cutout"
msgstr "Decupare PCB"

#: flatcamGUI/ObjectUI.py:467 flatcamGUI/PreferencesUI.py:3553
msgid ""
"Create toolpaths to cut around\n"
"the PCB and separate it from\n"
"the original board."
msgstr ""
"Crează taieturi de jur inprejurul PCB-ului,\n"
"lasand punţi pentru a separa PCB-ul de \n"
"placa din care a fost taiat."

#: flatcamGUI/ObjectUI.py:472 flatcamTools/ToolCutOut.py:348
msgid "Cutout Tool"
msgstr "Unealta Decupare"

#: flatcamGUI/ObjectUI.py:474
msgid ""
"Generate the geometry for\n"
"the board cutout."
msgstr ""
"Generează un obiect Geometrie\n"
"pt decuparea PCB."

#: flatcamGUI/ObjectUI.py:481 flatcamGUI/PreferencesUI.py:1171
msgid "Non-copper regions"
msgstr "Regiuni fără Cu"

#: flatcamGUI/ObjectUI.py:483 flatcamGUI/PreferencesUI.py:1173
msgid ""
"Create polygons covering the\n"
"areas without copper on the PCB.\n"
"Equivalent to the inverse of this\n"
"object. Can be used to remove all\n"
"copper from a specified region."
msgstr ""
"Crează poligoane acopering zonele fără\n"
"cupru de pe PCB. Echivalent cu inversul\n"
"obiectului sursa. Poate fi folosit pt a indeparta\n"
"cuprul din zona specificata."

#: flatcamGUI/ObjectUI.py:493 flatcamGUI/ObjectUI.py:525
#: flatcamGUI/PreferencesUI.py:1185 flatcamGUI/PreferencesUI.py:1210
msgid "Boundary Margin"
msgstr "Margine"

#: flatcamGUI/ObjectUI.py:495 flatcamGUI/PreferencesUI.py:1187
msgid ""
"Specify the edge of the PCB\n"
"by drawing a box around all\n"
"objects with this minimum\n"
"distance."
msgstr ""
"Specificati marginea PCB-ului prin desenarea\n"
"unei forme patratice de jur imprejurul la toate obiectele\n"
"la o distanţa minima cu valoarea din acest câmp."

#: flatcamGUI/ObjectUI.py:506 flatcamGUI/ObjectUI.py:535
#: flatcamGUI/PreferencesUI.py:1197 flatcamGUI/PreferencesUI.py:1219
msgid "Rounded Geo"
msgstr "Geo rotunjita"

#: flatcamGUI/ObjectUI.py:508 flatcamGUI/PreferencesUI.py:1199
msgid "Resulting geometry will have rounded corners."
msgstr ""
"Obiectul Geometrie rezultat \n"
"va avea colțurile rotunjite."

#: flatcamGUI/ObjectUI.py:512 flatcamGUI/ObjectUI.py:544
#: flatcamTools/ToolCutOut.py:183 flatcamTools/ToolCutOut.py:203
#: flatcamTools/ToolCutOut.py:254 flatcamTools/ToolSolderPaste.py:127
msgid "Generate Geo"
msgstr "Crează Geo"

#: flatcamGUI/ObjectUI.py:517 flatcamGUI/PreferencesUI.py:1204
#: flatcamTools/ToolPanelize.py:85
msgid "Bounding Box"
msgstr "Forma înconjurătoare"

#: flatcamGUI/ObjectUI.py:519
msgid ""
"Create a geometry surrounding the Gerber object.\n"
"Square shape."
msgstr ""
"Generează un obiect tip Geometrie care va inconjura\n"
"obiectul Gerber. Forma patratica (rectangulara)."

#: flatcamGUI/ObjectUI.py:527 flatcamGUI/PreferencesUI.py:1212
msgid ""
"Distance of the edges of the box\n"
"to the nearest polygon."
msgstr ""
"Distanta de la marginile formei înconjurătoare\n"
"pana la cel mai apropiat poligon."

#: flatcamGUI/ObjectUI.py:537 flatcamGUI/PreferencesUI.py:1221
msgid ""
"If the bounding box is \n"
"to have rounded corners\n"
"their radius is equal to\n"
"the margin."
msgstr ""
"Daca forma înconjurătoare să aibă colțuri rotunjite.\n"
"Raza acesor colțuri va fi egală cu parametrul Margine."

#: flatcamGUI/ObjectUI.py:546
msgid "Generate the Geometry object."
msgstr "Generează obiectul Geometrie."

#: flatcamGUI/ObjectUI.py:558
msgid "Excellon Object"
msgstr "Obiect Excellon"

#: flatcamGUI/ObjectUI.py:569
msgid "Solid circles."
msgstr "Cercuri solide."

#: flatcamGUI/ObjectUI.py:617
msgid "Drills"
msgstr "Găuri"

#: flatcamGUI/ObjectUI.py:617 flatcamGUI/PreferencesUI.py:2446
msgid "Slots"
msgstr "Sloturi"

#: flatcamGUI/ObjectUI.py:618 flatcamGUI/PreferencesUI.py:2074
msgid "Offset Z"
msgstr "Ofset Z"

#: flatcamGUI/ObjectUI.py:622
msgid ""
"This is the Tool Number.\n"
"When ToolChange is checked, on toolchange event this value\n"
"will be showed as a T1, T2 ... Tn in the Machine Code.\n"
"\n"
"Here the tools are selected for G-code generation."
msgstr ""
"Acesta este numărul uneltei.\n"
"Când se foloseşte optiunea de pauza pt schimb unealtă,\n"
"la evenim. de schimb unealtă, va aparea sub forma T1, T2, etc\n"
"in codul masina CNC.\n"
"Aici se selectează uneltele pt generarea de G-Code."

#: flatcamGUI/ObjectUI.py:627 flatcamGUI/ObjectUI.py:970
#: flatcamTools/ToolPaint.py:120
msgid ""
"Tool Diameter. It's value (in current FlatCAM units) \n"
"is the cut width into the material."
msgstr ""
"Diametrul uneltei. Valoarea să (in unitati curente)\n"
"reprezinta lăţimea taieturii in material."

#: flatcamGUI/ObjectUI.py:630
msgid ""
"The number of Drill holes. Holes that are drilled with\n"
"a drill bit."
msgstr ""
"Numărul de găuri. Sunt găuri efectuate prin\n"
"operațiuni de găurire efectuate cu un burghiu."

#: flatcamGUI/ObjectUI.py:633
msgid ""
"The number of Slot holes. Holes that are created by\n"
"milling them with an endmill bit."
msgstr ""
"Numărul de sloturi. Sunt găuri efectuate\n"
"prin op. de frezare cu o freza."

#: flatcamGUI/ObjectUI.py:636 flatcamGUI/PreferencesUI.py:2076
msgid ""
"Some drill bits (the larger ones) need to drill deeper\n"
"to create the desired exit hole diameter due of the tip shape.\n"
"The value here can compensate the Cut Z parameter."
msgstr ""
"Unele burghie (in special cele cu diametru mai mare)\n"
"au nevoie să găurească mai adanc pentru a depăși conul\n"
"din vârful burghiului astfel încât diametrul găurii de ieșire\n"
"să fie cel dorit.\n"
"Valoarea de aici efectuează o compensare asupra\n"
"parametrului >Z tăiere<."

#: flatcamGUI/ObjectUI.py:640
msgid ""
"Toggle display of the drills for the current tool.\n"
"This does not select the tools for G-code generation."
msgstr ""
"Comută afișarea găurilor pt unealta curentă.\n"
"Aceata nu selectează uneltele pt generarea G-Code."

#: flatcamGUI/ObjectUI.py:647 flatcamGUI/PreferencesUI.py:1886
#: flatcamGUI/PreferencesUI.py:2635
msgid "Create CNC Job"
msgstr "Crează CNCJob"

#: flatcamGUI/ObjectUI.py:649
msgid ""
"Create a CNC Job object\n"
"for this drill object."
msgstr ""
"Crează un obiect CNCJob din\n"
"acest obiect."

#: flatcamGUI/ObjectUI.py:658 flatcamGUI/ObjectUI.py:1137
#: flatcamGUI/PreferencesUI.py:1897 flatcamGUI/PreferencesUI.py:2647
#: flatcamGUI/PreferencesUI.py:3389 flatcamGUI/PreferencesUI.py:4077
#: flatcamTools/ToolCalculators.py:107 flatcamTools/ToolNonCopperClear.py:269
msgid "Cut Z"
msgstr "Z tăiere"

#: flatcamGUI/ObjectUI.py:660 flatcamGUI/PreferencesUI.py:1899
msgid ""
"Drill depth (negative)\n"
"below the copper surface."
msgstr ""
"Adâncimea de tăiere (valoare negativă).\n"
"Daca se foloseşte o val. pozitivă, aplicaţia\n"
"va incerca in mod automat să schimbe semnul."

#: flatcamGUI/ObjectUI.py:668 flatcamGUI/ObjectUI.py:1171
#: flatcamGUI/PreferencesUI.py:1907 flatcamGUI/PreferencesUI.py:2685
msgid "Travel Z"
msgstr "Z Deplasare"

#: flatcamGUI/ObjectUI.py:670 flatcamGUI/PreferencesUI.py:1909
msgid ""
"Tool height when travelling\n"
"across the XY plane."
msgstr ""
"Înălţimea la care unealtă se deplasează\n"
"in planul X-Y, fără a efectua taieri, adica\n"
"in afara materialului."

#: flatcamGUI/ObjectUI.py:678 flatcamGUI/ObjectUI.py:1189
#: flatcamGUI/PreferencesUI.py:1917 flatcamGUI/PreferencesUI.py:2695
msgid "Tool change"
msgstr "Schimb unealtă"

#: flatcamGUI/ObjectUI.py:680 flatcamGUI/PreferencesUI.py:1919
msgid ""
"Include tool-change sequence\n"
"in G-Code (Pause for tool change)."
msgstr ""
"Include o secventa de schimbare unealtă\n"
"in codul G-Code (pauza pentru schimbare unealtă).\n"
"De obicei este folosita comanda G-Code M6."

#: flatcamGUI/ObjectUI.py:686 flatcamGUI/ObjectUI.py:1182
msgid "Tool change Z"
msgstr "Z schimb unealtă"

#: flatcamGUI/ObjectUI.py:688 flatcamGUI/ObjectUI.py:1185
#: flatcamGUI/PreferencesUI.py:1928 flatcamGUI/PreferencesUI.py:2710
msgid ""
"Z-axis position (height) for\n"
"tool change."
msgstr "Înălţimea, pe axa Z,  pentru schimbul uneltei."

#: flatcamGUI/ObjectUI.py:697 flatcamGUI/PreferencesUI.py:2091
#: flatcamGUI/PreferencesUI.py:2824
msgid "Start move Z"
msgstr "Z pornire"

#: flatcamGUI/ObjectUI.py:699 flatcamGUI/PreferencesUI.py:2093
msgid ""
"Height of the tool just after start.\n"
"Delete the value if you don't need this feature."
msgstr ""
"Înălţimea uneltei imediat dupa ce se porneste operatia CNC.\n"
"Lasa casuta goala daca nu se foloseşte."

#: flatcamGUI/ObjectUI.py:707 flatcamGUI/ObjectUI.py:1215
#: flatcamGUI/PreferencesUI.py:1936 flatcamGUI/PreferencesUI.py:2719
msgid "End move Z"
msgstr "Z oprire"

#: flatcamGUI/ObjectUI.py:709 flatcamGUI/ObjectUI.py:1217
#: flatcamGUI/PreferencesUI.py:1938 flatcamGUI/PreferencesUI.py:2721
msgid ""
"Height of the tool after\n"
"the last move at the end of the job."
msgstr "Înălţimea la care se parchează freza dupa ce se termina lucrul."

#: flatcamGUI/ObjectUI.py:717 flatcamGUI/PreferencesUI.py:1946
#: flatcamGUI/PreferencesUI.py:4368 flatcamTools/ToolSolderPaste.py:224
msgid "Feedrate Z"
msgstr "Feedrate Z"

#: flatcamGUI/ObjectUI.py:719 flatcamGUI/PreferencesUI.py:1948
msgid ""
"Tool speed while drilling\n"
"(in units per minute).\n"
"So called 'Plunge' feedrate.\n"
"This is for linear move G01."
msgstr ""
"Viteza uneltei când se face găuriea\n"
"(in unitati pe minut).\n"
"Asa numita viteza unealta tip \"plunge\".\n"
"Aceasta este mișcarea lineara G01."

#: flatcamGUI/ObjectUI.py:729 flatcamGUI/PreferencesUI.py:2101
msgid "Feedrate Rapids"
msgstr "Feedrate rapizi"

#: flatcamGUI/ObjectUI.py:731 flatcamGUI/PreferencesUI.py:2103
msgid ""
"Tool speed while drilling\n"
"(in units per minute).\n"
"This is for the rapid move G00.\n"
"It is useful only for Marlin,\n"
"ignore for any other cases."
msgstr ""
"Viteza de găurire, in unitati pe minut.\n"
"Corespunde comenzii G0 și este utila doar pentru\n"
"printerul 3D Marlin, implicit când se foloseşte fişierul\n"
"postprocesor: Marlin. Ignora aceasta parametru in rest."

#: flatcamGUI/ObjectUI.py:745 flatcamGUI/ObjectUI.py:1272
#: flatcamGUI/PreferencesUI.py:2750
msgid "Spindle speed"
msgstr "Viteza motor"

#: flatcamGUI/ObjectUI.py:747 flatcamGUI/PreferencesUI.py:1960
msgid ""
"Speed of the spindle\n"
"in RPM (optional)"
msgstr ""
"Viteza cu care se roteste motorul ('Spindle').\n"
"In RPM (rotatii pe minut).\n"
"Acest parametru este optional și se poate lasa gol\n"
"daca nu se foloseşte."

#: flatcamGUI/ObjectUI.py:755 flatcamGUI/ObjectUI.py:1285
#: flatcamGUI/PreferencesUI.py:1968 flatcamGUI/PreferencesUI.py:2763
msgid "Dwell"
msgstr "Pauza"

#: flatcamGUI/ObjectUI.py:757 flatcamGUI/ObjectUI.py:1288
#: flatcamGUI/PreferencesUI.py:1970 flatcamGUI/PreferencesUI.py:2765
msgid ""
"Pause to allow the spindle to reach its\n"
"speed before cutting."
msgstr ""
"O pauza care permite motorului să ajunga la turatia specificata,\n"
"inainte de a incepe mișcarea spre poziţia de tăiere (găurire)."

#: flatcamGUI/ObjectUI.py:762 flatcamGUI/ObjectUI.py:1294
#: flatcamGUI/PreferencesUI.py:1975 flatcamGUI/PreferencesUI.py:2770
msgid "Number of time units for spindle to dwell."
msgstr "Timpul (ori secunde ori milisec) cat se stă in pauză."

#: flatcamGUI/ObjectUI.py:770 flatcamGUI/PreferencesUI.py:1988
#: flatcamGUI/PreferencesUI.py:2780
msgid "Postprocessor"
msgstr "Postprocesor"

#: flatcamGUI/ObjectUI.py:772 flatcamGUI/PreferencesUI.py:1990
msgid ""
"The postprocessor JSON file that dictates\n"
"Gcode output."
msgstr ""
"Fișierul JSON postprocesor care dictează\n"
"codul Gcode."

#: flatcamGUI/ObjectUI.py:781 flatcamGUI/ObjectUI.py:1313
#: flatcamGUI/PreferencesUI.py:2114 flatcamGUI/PreferencesUI.py:2857
msgid "Probe Z depth"
msgstr "Z sonda"

#: flatcamGUI/ObjectUI.py:783 flatcamGUI/ObjectUI.py:1315
#: flatcamGUI/PreferencesUI.py:2116 flatcamGUI/PreferencesUI.py:2859
msgid ""
"The maximum depth that the probe is allowed\n"
"to probe. Negative value, in current units."
msgstr ""
"Adâncimea maxima la care este permis sondei să coboare.\n"
"Are o valoare negativă, in unitatile curente."

#: flatcamGUI/ObjectUI.py:793 flatcamGUI/ObjectUI.py:1325
#: flatcamGUI/PreferencesUI.py:2124 flatcamGUI/PreferencesUI.py:2867
msgid "Feedrate Probe"
msgstr "Feedrate sonda"

#: flatcamGUI/ObjectUI.py:795 flatcamGUI/ObjectUI.py:1327
#: flatcamGUI/PreferencesUI.py:2126 flatcamGUI/PreferencesUI.py:2869
msgid "The feedrate used while the probe is probing."
msgstr "Viteza sondei când aceasta coboara."

#: flatcamGUI/ObjectUI.py:804
msgid ""
"Select from the Tools Table above\n"
"the hole dias that are to be drilled.\n"
"Use the # column to make the selection."
msgstr ""
"Selecteaa din Tabela de Unelte de mai sus\n"
"acele găuri care vor fi frezate.\n"
"Foloseste coloanal # pt a face această selectie."

#: flatcamGUI/ObjectUI.py:812 flatcamGUI/PreferencesUI.py:1999
msgid "Gcode"
msgstr "Gcode"

#: flatcamGUI/ObjectUI.py:814
msgid ""
"Choose what to use for GCode generation:\n"
"'Drills', 'Slots' or 'Both'.\n"
"When choosing 'Slots' or 'Both', slots will be\n"
"converted to a series of drills."
msgstr ""
"Alege ce să folosești pentru generarea de G-Code:\n"
"- Găuri\n"
"- Sloturi\n"
"- Ambele\n"
"Când se alege >Sloturi< sau >Ambele<, sloturile\n"
"vor fi convertite intr-o serie de găuriri."

#: flatcamGUI/ObjectUI.py:829
msgid "Create Drills GCode"
msgstr "Crează GCode Găuri"

#: flatcamGUI/ObjectUI.py:831
msgid "Generate the CNC Job."
msgstr "Generează un obiect CNCJob."

#: flatcamGUI/ObjectUI.py:836 flatcamGUI/PreferencesUI.py:2017
msgid "Mill Holes"
msgstr "Frezare găuri"

#: flatcamGUI/ObjectUI.py:838 flatcamGUI/PreferencesUI.py:2019
msgid "Create Geometry for milling holes."
msgstr "Crează un obiect tip Geometrie pentru frezarea găurilor."

#: flatcamGUI/ObjectUI.py:843
msgid ""
"Select from the Tools Table above\n"
"the hole dias that are to be milled.\n"
"Use the # column to make the selection."
msgstr ""
"Selecteaa din Tabela de Unelte de mai sus\n"
"acele găuri care vor fi frezate.\n"
"Foloseste coloana # pt a face această selectie."

#: flatcamGUI/ObjectUI.py:851 flatcamGUI/PreferencesUI.py:2023
msgid "Drill Tool dia"
msgstr "Dia. Burghiu Găurire"

#: flatcamGUI/ObjectUI.py:853 flatcamGUI/PreferencesUI.py:1119
#: flatcamGUI/PreferencesUI.py:2025
msgid "Diameter of the cutting tool."
msgstr "Diametrul uneltei taietoare."

#: flatcamGUI/ObjectUI.py:858
msgid "Mill Drills Geo"
msgstr "Geo pt frezare găuri"

#: flatcamGUI/ObjectUI.py:860
msgid ""
"Create the Geometry Object\n"
"for milling DRILLS toolpaths."
msgstr ""
"Crează un obiect tip Geometrie pt.\n"
"frezarea rutelor create din Găuri."

#: flatcamGUI/ObjectUI.py:867 flatcamGUI/PreferencesUI.py:2030
msgid "Slot Tool dia"
msgstr "Dia. Freza Slot"

#: flatcamGUI/ObjectUI.py:869 flatcamGUI/PreferencesUI.py:2032
msgid ""
"Diameter of the cutting tool\n"
"when milling slots."
msgstr "Diametrul frezei când se frezează sloturile."

#: flatcamGUI/ObjectUI.py:875
msgid "Mill Slots Geo"
msgstr "Geo pt. frezare sloturi"

#: flatcamGUI/ObjectUI.py:877
msgid ""
"Create the Geometry Object\n"
"for milling SLOTS toolpaths."
msgstr ""
"Crează un obiect tip Geometrie pt.\n"
"frezarea rutelor create din Sloturi."

#: flatcamGUI/ObjectUI.py:895
msgid "Geometry Object"
msgstr "Obiect Geometrie"

#: flatcamGUI/ObjectUI.py:926
msgid ""
"Tools in this Geometry object used for cutting.\n"
"The 'Offset' entry will set an offset for the cut.\n"
"'Offset' can be inside, outside, on path (none) and custom.\n"
"'Type' entry is only informative and it allow to know the \n"
"intent of using the current tool. \n"
"It can be Rough(ing), Finish(ing) or Iso(lation).\n"
"The 'Tool type'(TT) can be circular with 1 to 4 teeths(C1..C4),\n"
"ball(B), or V-Shaped(V). \n"
"When V-shaped is selected the 'Type' entry is automatically \n"
"set to Isolation, the CutZ parameter in the UI form is\n"
"grayed out and Cut Z is automatically calculated from the newly \n"
"showed UI form entries named V-Tip Dia and V-Tip Angle."
msgstr ""
"Uneltele din acest obiect Geometrie folosit pentru tăiere.\n"
"Intrarea >Ofset< va seta un ofset pentru tăiere.\n"
"Acesta poate fi Inauntru, In afară, Pe cale și Personalizat.\n"
"Intrarea >Tip< este doar informativa și permite să stim intenția\n"
"pentru care folosim unealta aleasă.\n"
"Poate să fie Grosier, Finisare și Izolaţie.\n"
"Intrarea >Tip unealta< (TU) poate fi: Circular (cu unul sau mai\n"
"multi dinti C1 ...C4), rotunda (B) sau cu vârf V-Shape (V).\n"
"\n"
"Când V-shape este selectat atunci și >Tip< este automat setat \n"
"in 'Izolare', prametrul >Z tăiere< din UI este dezactivat (gri) pt că\n"
"este acum calculat automat din doi noi parametri care sunt afisati:\n"
"- V-Dia \n"
"- V-unghi."

#: flatcamGUI/ObjectUI.py:943 flatcamGUI/ObjectUI.py:1506
#: flatcamGUI/PreferencesUI.py:2990
msgid "Plot Object"
msgstr "Afisează"

#: flatcamGUI/ObjectUI.py:957 flatcamGUI/ObjectUI.py:1522
msgid "Dia"
msgstr "Dia"

#: flatcamGUI/ObjectUI.py:957 flatcamGUI/ObjectUI.py:1522
#: flatcamTools/ToolNonCopperClear.py:107 flatcamTools/ToolPaint.py:106
msgid "TT"
msgstr "TU"

#: flatcamGUI/ObjectUI.py:964
msgid ""
"This is the Tool Number.\n"
"When ToolChange is checked, on toolchange event this value\n"
"will be showed as a T1, T2 ... Tn"
msgstr ""
"Acesta este numărul uneltei.\n"
"Când se foloseşte optiunea de pauza pt schimb unealtă,\n"
"la evenim. de schimb unealtă, va aparea sub forma T1, T2, etc\n"
"in codul masina CNC"

#: flatcamGUI/ObjectUI.py:975
msgid ""
"The value for the Offset can be:\n"
"- Path -> There is no offset, the tool cut will be done through the geometry "
"line.\n"
"- In(side) -> The tool cut will follow the geometry inside. It will create a "
"'pocket'.\n"
"- Out(side) -> The tool cut will follow the geometry line on the outside."
msgstr ""
"Valorile pt Ofset pot fi:\n"
"- Pe cale -> Ofsetul este zero, tăietura va fi efectuatat pe linia "
"geometrică\n"
"- În(ăuntru) -> Tăietura va urma geometria pe interior. Va crea un "
"'buzunar'\n"
"- Afară-> Tăietura va urma geometria pe exterior."

#: flatcamGUI/ObjectUI.py:982
msgid ""
"The (Operation) Type has only informative value. Usually the UI form "
"values \n"
"are choose based on the operation type and this will serve as a reminder.\n"
"Can be 'Roughing', 'Finishing' or 'Isolation'.\n"
"For Roughing we may choose a lower Feedrate and multiDepth cut.\n"
"For Finishing we may choose a higher Feedrate, without multiDepth.\n"
"For Isolation we need a lower Feedrate as it use a milling bit with a fine "
"tip."
msgstr ""
"Tipul (operaţiei efectuate cu unealta) are doar o valoare informativa. De "
"obicei\n"
"valorile din UI sunt alese bazate pe tipul operaţiei și acesta ne serveste "
"ca și\n"
"notificare. Poate să fie: Grosier, Finisare sau Izolare.\n"
"Grosier -> putem alege de ex un feedrate scazut și tăiere in mai multe "
"etape.\n"
"Finisare -> alegem un feedrate mai mare și tăiere dintr-o singură operaţie\n"
"Izolare -> avem nevoie de un feedrate scazut pt ca se foloseşte o freza cu "
"un\n"
"vârf fin, ascuțit."

#: flatcamGUI/ObjectUI.py:991
msgid ""
"The Tool Type (TT) can be:\n"
"- Circular with 1 ... 4 teeth -> it is informative only. Being circular the "
"cut width in material\n"
"is exactly the tool diameter.\n"
"- Ball -> informative only and make reference to the Ball type endmill.\n"
"- V-Shape -> it will disable de Z-Cut parameter in the UI form and enable "
"two additional UI form\n"
"fields: V-Tip Dia and V-Tip Angle. Adjusting those two values will adjust "
"the Z-Cut parameter such\n"
"as the cut width into material will be equal with the value in the Tool "
"Diameter column of this table.\n"
"Choosing the V-Shape Tool Type automatically will select the Operation Type "
"as Isolation."
msgstr ""
"Tipul Uneltei (TU) poate fi:\n"
"- Circular cu 1 ... 4 dinti -> are aspect informativ. Lăţimea de tăiere este "
"exact diametrul uneltei.\n"
"- Rotund (ball) -> val. informativa și face referinţă la tipul de freza "
"Ball\n"
"- V-Shape -> produce modificari in UI. Va dezactiva parametrul >Z tăiere< "
"deoarece acesta va fi\n"
"calculat automat din valorile >V-dia< și >V-unghi, parametri care sunt acum "
"afisati in UI, cat și din\n"
"lăţimea de tăiere in material care este de fapt valoarea diametrului "
"uneltei.\n"
"Alegerea tipului V-Shape (forma in V) va selecta automat Tipul de Operaţie "
"ca Izolare."

#: flatcamGUI/ObjectUI.py:1003
msgid ""
"Plot column. It is visible only for MultiGeo geometries, meaning geometries "
"that holds the geometry\n"
"data into the tools. For those geometries, deleting the tool will delete the "
"geometry data also,\n"
"so be WARNED. From the checkboxes on each row it can be enabled/disabled the "
"plot on canvas\n"
"for the corresponding tool."
msgstr ""
"Coloana de afișare. Este vizibila doar pentru obiecte Geometrie de tip "
"MultiGeo, ceea ce inseamna că\n"
"obiectul stochează datele geometrice in variabilele unelte. \n"
"\n"
"ATENTIE: Pentru aceste obiecte, ștergerea unei unelte conduce automat și la "
"ștergerea \n"
"datelor geometrice asociate. Din checkbox-urile asociate, fiecarei unelte i "
"se poate activa/dezactiva\n"
"afișarea in canvas."

#: flatcamGUI/ObjectUI.py:1016
msgid "Tool Offset"
msgstr "Ofset unealtă"

#: flatcamGUI/ObjectUI.py:1019
msgid ""
"The value to offset the cut when \n"
"the Offset type selected is 'Offset'.\n"
"The value can be positive for 'outside'\n"
"cut and negative for 'inside' cut."
msgstr ""
"Valoarea cu care se face ofset când tipul de ofset selectat\n"
"este >Ofset<. Aceasta valoare poate fi pozitivă pentru un ofset\n"
"in exterior sau poate fi negativă pentru un ofset in interior."

#: flatcamGUI/ObjectUI.py:1061 flatcamTools/ToolNonCopperClear.py:239
#: flatcamTools/ToolPaint.py:178
msgid ""
"Add a new tool to the Tool Table\n"
"with the diameter specified above."
msgstr ""
"Adaugă o noua unelata in Tabela de Unelte,\n"
"cu diametrul specificat mai sus."

#: flatcamGUI/ObjectUI.py:1069
msgid ""
"Copy a selection of tools in the Tool Table\n"
"by first selecting a row in the Tool Table."
msgstr ""
"Copiază o selecţie de unelte in Tabela de Unelte prin\n"
"selectarea unei linii (sau mai multe) in Tabela de Unelte."

#: flatcamGUI/ObjectUI.py:1077
msgid ""
"Delete a selection of tools in the Tool Table\n"
"by first selecting a row in the Tool Table."
msgstr ""
"Șterge o selecţie de unelte in Tabela de Unelte prin\n"
"selectarea unei linii (sau mai multe) in Tabela de Unelte."

#: flatcamGUI/ObjectUI.py:1093
msgid "Tool Data"
msgstr "Date unealtă"

#: flatcamGUI/ObjectUI.py:1096
msgid ""
"The data used for creating GCode.\n"
"Each tool store it's own set of such data."
msgstr ""
"Datele folosite pentru crearea codului GCode.\n"
"Fiecare unealtă stochează un subset de asemenea date."

#: flatcamGUI/ObjectUI.py:1114 flatcamGUI/PreferencesUI.py:3330
#: flatcamTools/ToolNonCopperClear.py:220
msgid "V-Tip Dia"
msgstr "V-dia"

#: flatcamGUI/ObjectUI.py:1117 flatcamGUI/PreferencesUI.py:3332
#: flatcamTools/ToolNonCopperClear.py:222
msgid "The tip diameter for V-Shape Tool"
msgstr ""
"Diametrul la vârf al uneltei tip V-Shape.\n"
"Forma in V"

#: flatcamGUI/ObjectUI.py:1125 flatcamGUI/PreferencesUI.py:3339
#: flatcamTools/ToolNonCopperClear.py:227
msgid "V-Tip Angle"
msgstr "V-unghi"

#: flatcamGUI/ObjectUI.py:1128 flatcamGUI/PreferencesUI.py:3341
#: flatcamTools/ToolNonCopperClear.py:229
msgid ""
"The tip angle for V-Shape Tool.\n"
"In degree."
msgstr ""
"Unghiul la vârf pentru unealta tip V-Shape. \n"
"In grade."

#: flatcamGUI/ObjectUI.py:1140 flatcamGUI/PreferencesUI.py:2649
msgid ""
"Cutting depth (negative)\n"
"below the copper surface."
msgstr ""
"Adâncimea la care se taie sub suprafata de cupru.\n"
"Valoare negativă."

#: flatcamGUI/ObjectUI.py:1149 flatcamGUI/PreferencesUI.py:2657
msgid "Multi-Depth"
msgstr "Multi-Pas"

#: flatcamGUI/ObjectUI.py:1152 flatcamGUI/PreferencesUI.py:2660
msgid ""
"Use multiple passes to limit\n"
"the cut depth in each pass. Will\n"
"cut multiple times until Cut Z is\n"
"reached."
msgstr ""
"Folosiți mai multe pase pentru a limita\n"
"adâncimea tăiată în fiecare trecere. Se\n"
"va tăia de mai multe ori până când este\n"
"atins Z de tăiere, Z Cut."

#: flatcamGUI/ObjectUI.py:1163
msgid "Depth of each pass (positive)."
msgstr ""
"Adâncimea pentru fiecare trecere.\n"
"Valoare pozitivă, in unitatile curente."

#: flatcamGUI/ObjectUI.py:1173 flatcamGUI/PreferencesUI.py:2687
msgid ""
"Height of the tool when\n"
"moving without cutting."
msgstr ""
"Înălţimea la care se misca unealta când nu taie,\n"
"deasupra materialului."

#: flatcamGUI/ObjectUI.py:1192 flatcamGUI/PreferencesUI.py:2698
msgid ""
"Include tool-change sequence\n"
"in the Machine Code (Pause for tool change)."
msgstr ""
"Include o secventa de schimb unealtă in \n"
"codul masina CNC. O pauza pentru schimbul\n"
"uneltei (M6)."

#: flatcamGUI/ObjectUI.py:1225 flatcamGUI/PreferencesUI.py:2729
msgid "Feed Rate X-Y"
msgstr "Feedrate X-Y"

#: flatcamGUI/ObjectUI.py:1227 flatcamGUI/PreferencesUI.py:2731
msgid ""
"Cutting speed in the XY\n"
"plane in units per minute"
msgstr ""
"Viteza de tăiere in planul X-Y\n"
"in unitati pe minut"

#: flatcamGUI/ObjectUI.py:1235 flatcamGUI/PreferencesUI.py:2739
msgid "Feed Rate Z"
msgstr "Feedrate Z"

#: flatcamGUI/ObjectUI.py:1237 flatcamGUI/PreferencesUI.py:2741
msgid ""
"Cutting speed in the XY\n"
"plane in units per minute.\n"
"It is called also Plunge."
msgstr ""
"Viteza de tăiere in planul Z\n"
"in unitati pe minut.\n"
"Mai este numita și viteza de plonjare."

#: flatcamGUI/ObjectUI.py:1246 flatcamGUI/PreferencesUI.py:2834
msgid "Feed Rate Rapids"
msgstr "Feedrate rapizi"

#: flatcamGUI/ObjectUI.py:1248 flatcamGUI/PreferencesUI.py:2836
msgid ""
"Cutting speed in the XY plane\n"
"(in units per minute).\n"
"This is for the rapid move G00.\n"
"It is useful only for Marlin,\n"
"ignore for any other cases."
msgstr ""
"Viteza de tăiere in planul X-Y, in unitati pe minut,\n"
"in legatura cu comanda G00.\n"
"Este utila doar când se foloseşte cu un printer 3D Marlin,\n"
"pentru toate celelalte cazuri ignora acest parametru."

#: flatcamGUI/ObjectUI.py:1262 flatcamGUI/PreferencesUI.py:2847
msgid "Re-cut 1st pt."
msgstr "Re-tăiere 1-ul pt."

#: flatcamGUI/ObjectUI.py:1264 flatcamGUI/PreferencesUI.py:2849
msgid ""
"In order to remove possible\n"
"copper leftovers where first cut\n"
"meet with last cut, we generate an\n"
"extended cut over the first cut section."
msgstr ""
"Bifează daca se dorește o siguranţă ca resturile de cupru\n"
"care pot ramane acolo unde se intalneste inceputul taierii\n"
"cu sfârşitul acesteia (este vorba de un contur), sunt eliminate\n"
"prin taierea peste acest punct."

#: flatcamGUI/ObjectUI.py:1275 flatcamGUI/PreferencesUI.py:2753
msgid ""
"Speed of the spindle in RPM (optional).\n"
"If LASER postprocessor is used,\n"
"this value is the power of laser."
msgstr ""
"Viteza motorului in RPM (optional).\n"
"Daca postprocesorul Laser este folosit,\n"
"valoarea să este puterea laserului."

#: flatcamGUI/ObjectUI.py:1302 flatcamGUI/PreferencesUI.py:4426
#: flatcamTools/ToolSolderPaste.py:276
msgid "PostProcessor"
msgstr "Postprocesor"

#: flatcamGUI/ObjectUI.py:1304 flatcamGUI/PreferencesUI.py:2782
msgid ""
"The Postprocessor file that dictates\n"
"the Machine Code (like GCode, RML, HPGL) output."
msgstr ""
"Fişierul postprocesor care controlează generarea\n"
"codului masina CNC (GCode, RML, HPGL) care \n"
"mai apoi este salvat."

#: flatcamGUI/ObjectUI.py:1337
msgid ""
"Add at least one tool in the tool-table.\n"
"Click the header to select all, or Ctrl + LMB\n"
"for custom selection of tools."
msgstr ""
"Adaugă cel puțin o unealtă in Tabela de Unelte.\n"
"Click pe header pentru selectarea tuturora asu CTRL + LMB click\n"
"pentru o selecţie personalizata de unelte."

#: flatcamGUI/ObjectUI.py:1344
msgid "Generate"
msgstr "Generează"

#: flatcamGUI/ObjectUI.py:1346
msgid "Generate the CNC Job object."
msgstr "Generează un obiect CNCJob."

#: flatcamGUI/ObjectUI.py:1353
msgid "Paint Area"
msgstr "Unealta Paint"

#: flatcamGUI/ObjectUI.py:1356 flatcamGUI/PreferencesUI.py:3711
msgid ""
"Creates tool paths to cover the\n"
"whole area of a polygon (remove\n"
"all copper). You will be asked\n"
"to click on the desired polygon."
msgstr ""
"Crează treceri taietoare pentru a acoperi\n"
"intreaga arie a unui poligon (pentru a indeparta\n"
"to cuprul, spre ex.). Când se actionează peste un\n"
"singur poligon se va cere să faceti click pe poligonul\n"
"dorit."

#: flatcamGUI/ObjectUI.py:1367
msgid "Launch Paint Tool in Tools Tab."
msgstr ""
"Lansează unealta FlatCAM numita Paint și\n"
"o instalează in Tab-ul Unealta."

#: flatcamGUI/ObjectUI.py:1383
msgid "CNC Job Object"
msgstr "Obiect CNCJob"

#: flatcamGUI/ObjectUI.py:1401 flatcamGUI/PreferencesUI.py:2995
msgid "Plot kind"
msgstr "Tip afișare"

#: flatcamGUI/ObjectUI.py:1404 flatcamGUI/PreferencesUI.py:2997
msgid ""
"This selects the kind of geometries on the canvas to plot.\n"
"Those can be either of type 'Travel' which means the moves\n"
"above the work piece or it can be of type 'Cut',\n"
"which means the moves that cut into the material."
msgstr ""
"Aici se poate selecta tipul de afișare a geometriilor.\n"
"Acestea pot fi:\n"
"- Voiaj -> miscarile deasupra materialului\n"
"- Tăiere -> miscarile in material, tăiere."

#: flatcamGUI/ObjectUI.py:1413 flatcamGUI/PreferencesUI.py:3005
msgid "Travel"
msgstr "Voiaj"

#: flatcamGUI/ObjectUI.py:1417 flatcamGUI/PreferencesUI.py:3014
msgid "Display Annotation"
msgstr "Afişează notații"

#: flatcamGUI/ObjectUI.py:1419 flatcamGUI/PreferencesUI.py:3016
msgid ""
"This selects if to display text annotation on the plot.\n"
"When checked it will display numbers in order for each end\n"
"of a travel line."
msgstr ""
"Aici se poate seta daca sa se afiseze notatiile text.\n"
"Cand este selectat va afisa numerele in ordine pt fiecare\n"
"capat al liniilor de traversare."

#: flatcamGUI/ObjectUI.py:1434
msgid "Travelled dist."
msgstr "Distanța parcursă"

#: flatcamGUI/ObjectUI.py:1436 flatcamGUI/ObjectUI.py:1441
msgid ""
"This is the total travelled distance on X-Y plane.\n"
"In current units."
msgstr ""
"Aceasta este distanţa totala parcursa in planul X-Y.\n"
"In unitatile curente."

#: flatcamGUI/ObjectUI.py:1446
msgid "Estimated time"
msgstr "Durată estimată"

#: flatcamGUI/ObjectUI.py:1448 flatcamGUI/ObjectUI.py:1453
msgid ""
"This is the estimated time to do the routing/drilling,\n"
"without the time spent in ToolChange events."
msgstr ""
"Acesta este timpul estimat pentru efectuarea traseului / găuririi,\n"
"fără timpul petrecut în evenimentele ToolChange."

#: flatcamGUI/ObjectUI.py:1488
msgid "CNC Tools Table"
msgstr "Tabela Unelte CNC"

#: flatcamGUI/ObjectUI.py:1491
msgid ""
"Tools in this CNCJob object used for cutting.\n"
"The tool diameter is used for plotting on canvas.\n"
"The 'Offset' entry will set an offset for the cut.\n"
"'Offset' can be inside, outside, on path (none) and custom.\n"
"'Type' entry is only informative and it allow to know the \n"
"intent of using the current tool. \n"
"It can be Rough(ing), Finish(ing) or Iso(lation).\n"
"The 'Tool type'(TT) can be circular with 1 to 4 teeths(C1..C4),\n"
"ball(B), or V-Shaped(V)."
msgstr ""
"Unelete folosite in acest obiect CNCJob pentru tăiere.\n"
"Diametrul uneltei este folosit pentru afișarea pe canvas.\n"
"Coloanele sunt:\n"
"- 'Ofset' -> poate fi in interior, in exterior, pe cale sau personalizat.\n"
"- 'Tipul' -> este doar informativ și poate fi: Grosier, Finisaj, Izolaţie\n"
"- 'Tipul uneltei' -> poate fi circular cu 1 ... 4 dinti, tip bila sau V-"
"Shape\n"
"(cu forma in V)."

#: flatcamGUI/ObjectUI.py:1523
msgid "P"
msgstr "P"

#: flatcamGUI/ObjectUI.py:1529
msgid "Update Plot"
msgstr "Actualiz. afișare"

#: flatcamGUI/ObjectUI.py:1531
msgid "Update the plot."
msgstr "Actualizează afișarea obiectelor."

#: flatcamGUI/ObjectUI.py:1538 flatcamGUI/PreferencesUI.py:3153
msgid "Export CNC Code"
msgstr "Exporta codul masina CNC"

#: flatcamGUI/ObjectUI.py:1540 flatcamGUI/PreferencesUI.py:3104
#: flatcamGUI/PreferencesUI.py:3155
msgid ""
"Export and save G-Code to\n"
"make this object to a file."
msgstr ""
"Exportă și salvează codul G-Code intr-un fişier\n"
"care este salvat pe HDD."

#: flatcamGUI/ObjectUI.py:1546
msgid "Prepend to CNC Code"
msgstr "Adaugă la inceput in codul G-Code"

#: flatcamGUI/ObjectUI.py:1548 flatcamGUI/PreferencesUI.py:3120
msgid ""
"Type here any G-Code commands you would\n"
"like to add at the beginning of the G-Code file."
msgstr ""
"Adaugă aici orice comenzi G-Code care se dorește să fie\n"
"inserate la inceputul codului G-Code."

#: flatcamGUI/ObjectUI.py:1557
msgid "Append to CNC Code"
msgstr "Adaugă la sfârşit in codul G-Code"

#: flatcamGUI/ObjectUI.py:1559 flatcamGUI/PreferencesUI.py:3132
msgid ""
"Type here any G-Code commands you would\n"
"like to append to the generated file.\n"
"I.e.: M2 (End of program)"
msgstr ""
"Adaugă aici orice comenzi G-Code care se dorește să fie\n"
"inserate la sfârşitul codului G-Code."

#: flatcamGUI/ObjectUI.py:1576 flatcamGUI/PreferencesUI.py:3161
msgid "Toolchange G-Code"
msgstr "G-Code pt schimb unealtă"

#: flatcamGUI/ObjectUI.py:1579 flatcamGUI/PreferencesUI.py:3164
msgid ""
"Type here any G-Code commands you would\n"
"like to be executed when Toolchange event is encountered.\n"
"This will constitute a Custom Toolchange GCode,\n"
"or a Toolchange Macro.\n"
"The FlatCAM variables are surrounded by '%' symbol.\n"
"\n"
"WARNING: it can be used only with a postprocessor file\n"
"that has 'toolchange_custom' in it's name and this is built\n"
"having as template the 'Toolchange Custom' posprocessor file."
msgstr ""
"Plasează aici acele comenzi G-Code care se dorește să fie executate\n"
"atunci când evenimentul de tip Schimb Unealtă este intalnit.\n"
"Aceasta va constitui un Macro pentru schimbare unealtă.\n"
"Variabilele FlatCAM folosite aici sunt inconjurate de simbolul %.\n"
"\n"
"ATENTIE:\n"
"poate fi folosit doar cu un fişier postprocesor care contine "
"'toolchange_custom'\n"
"in numele sau."

#: flatcamGUI/ObjectUI.py:1598 flatcamGUI/PreferencesUI.py:3192
msgid "Use Toolchange Macro"
msgstr "Fol. Macro schimb unealtă"

#: flatcamGUI/ObjectUI.py:1600 flatcamGUI/PreferencesUI.py:3194
msgid ""
"Check this box if you want to use\n"
"a Custom Toolchange GCode (macro)."
msgstr ""
"Bifează aici daca dorești să folosești Macro pentru\n"
"schimb unelte."

#: flatcamGUI/ObjectUI.py:1608 flatcamGUI/PreferencesUI.py:3206
msgid ""
"A list of the FlatCAM variables that can be used\n"
"in the Toolchange event.\n"
"They have to be surrounded by the '%' symbol"
msgstr ""
"O lista de variabile FlatCAM care se pot folosi in evenimentul \n"
"de schimb al uneltei (când se intalneste comanda M6).\n"
"Este necesar să fie inconjurate de simbolul '%'"

#: flatcamGUI/ObjectUI.py:1615 flatcamGUI/PreferencesUI.py:1432
#: flatcamGUI/PreferencesUI.py:2331 flatcamGUI/PreferencesUI.py:2934
#: flatcamGUI/PreferencesUI.py:3213 flatcamGUI/PreferencesUI.py:3292
#: flatcamGUI/PreferencesUI.py:3551 flatcamGUI/PreferencesUI.py:3650
#: flatcamGUI/PreferencesUI.py:3861 flatcamGUI/PreferencesUI.py:3942
#: flatcamGUI/PreferencesUI.py:4141 flatcamGUI/PreferencesUI.py:4273
#: flatcamGUI/PreferencesUI.py:4446 flatcamTools/ToolNonCopperClear.py:265
msgid "Parameters"
msgstr "Parametri"

#: flatcamGUI/ObjectUI.py:1618 flatcamGUI/PreferencesUI.py:3216
msgid "FlatCAM CNC parameters"
msgstr "Parametri FlatCAM CNC"

#: flatcamGUI/ObjectUI.py:1619
msgid "tool = tool number"
msgstr "tool = numărul uneltei"

#: flatcamGUI/ObjectUI.py:1620
msgid "tooldia = tool diameter"
msgstr "tooldia = dimaetrul uneltei"

#: flatcamGUI/ObjectUI.py:1621
msgid "t_drills = for Excellon, total number of drills"
msgstr "t_drills = pt Excellom, numărul total de operațiuni găurire"

#: flatcamGUI/ObjectUI.py:1622
msgid "x_toolchange = X coord for Toolchange"
msgstr "x_toolchange = coord. X pt schimb unealtă"

#: flatcamGUI/ObjectUI.py:1623 flatcamGUI/PreferencesUI.py:3222
msgid "y_toolchange = Y coord for Toolchange"
msgstr "y_toolchange = coord. Y pt schimb unealtă"

#: flatcamGUI/ObjectUI.py:1624
msgid "z_toolchange = Z coord for Toolchange"
msgstr "z_toolchange = coord. Z pt schimb unealtă"

#: flatcamGUI/ObjectUI.py:1625
msgid "z_cut = depth where to cut"
msgstr "z_cut = adâncimea de tăiere"

#: flatcamGUI/ObjectUI.py:1626
msgid "z_move = height where to travel"
msgstr "z_move = Înălţimea deplasare"

#: flatcamGUI/ObjectUI.py:1627
msgid "z_depthpercut = the step value for multidepth cut"
msgstr "z_depthpercut = pasul pentru taierea progresiva"

#: flatcamGUI/ObjectUI.py:1628
msgid "spindlesspeed = the value for the spindle speed"
msgstr "spindlesspeed = valoarea viteza motor"

#: flatcamGUI/ObjectUI.py:1629 flatcamGUI/PreferencesUI.py:3232
msgid "dwelltime = time to dwell to allow the spindle to reach it's set RPM"
msgstr "dwelltime = durata de asteptare ca motorul să ajunga la turatia setată"

#: flatcamGUI/ObjectUI.py:1645
msgid "View CNC Code"
msgstr "Vizualiz. codul CNC"

#: flatcamGUI/ObjectUI.py:1647
msgid ""
"Opens TAB to view/modify/print G-Code\n"
"file."
msgstr ""
"Deschide un nou tab pentru a vizualiza, modifica\n"
"sau tipari codul G-Code."

#: flatcamGUI/ObjectUI.py:1652
msgid "Save CNC Code"
msgstr "Salvează codul CNC"

#: flatcamGUI/ObjectUI.py:1654
msgid ""
"Opens dialog to save G-Code\n"
"file."
msgstr ""
"Deshide o fereastra dialog pentru salvarea codului\n"
"G-Code intr-un fişier."

#: flatcamGUI/PlotCanvasLegacy.py:1019
msgid ""
"Could not annotate due of a difference between the number of text elements "
"and the number of text positions."
msgstr ""
"Nu s-a putut adnota datorită unei diferențe între numărul de elemente de "
"text și numărul de locații de text."

#: flatcamGUI/PreferencesUI.py:257
msgid "GUI Preferences"
msgstr "Preferințe GUI"

#: flatcamGUI/PreferencesUI.py:263
msgid "Grid X value"
msgstr "Valoarea Grid_X"

#: flatcamGUI/PreferencesUI.py:265
msgid "This is the Grid snap value on X axis."
msgstr "Aceasta este valoare pentru lipire pe Grid pe axa X."

#: flatcamGUI/PreferencesUI.py:270
msgid "Grid Y value"
msgstr "Valoarea Grid_Y"

#: flatcamGUI/PreferencesUI.py:272
msgid "This is the Grid snap value on Y axis."
msgstr "Aceasta este valoare pentru lipire pe Grid pe axa Y."

#: flatcamGUI/PreferencesUI.py:277
msgid "Snap Max"
msgstr "Lipire Max"

#: flatcamGUI/PreferencesUI.py:282
msgid "Workspace"
msgstr "Spatiu de lucru"

#: flatcamGUI/PreferencesUI.py:284
msgid ""
"Draw a delimiting rectangle on canvas.\n"
"The purpose is to illustrate the limits for our work."
msgstr ""
"Desenează un patrulater care delimitează o suprafată de lucru.\n"
"Scopul este de a ilustra limitele suprafetei noastre de lucru."

#: flatcamGUI/PreferencesUI.py:287
msgid "Wk. format"
msgstr "Format SL"

#: flatcamGUI/PreferencesUI.py:289
msgid ""
"Select the type of rectangle to be used on canvas,\n"
"as valid workspace."
msgstr ""
"Selectează tipul de patrulater care va fi desenat pe canvas,\n"
"pentru a delimita suprafata de lucru disponibilă (SL)."

#: flatcamGUI/PreferencesUI.py:302
msgid "Plot Fill"
msgstr "Culoare Afișare"

#: flatcamGUI/PreferencesUI.py:304
msgid ""
"Set the fill color for plotted objects.\n"
"First 6 digits are the color and the last 2\n"
"digits are for alpha (transparency) level."
msgstr ""
"Setează culoarea pentru obiectele afisate.\n"
"Primii 6 digiti sunt culoarea efectivă și ultimii\n"
"doi sunt pentru nivelul de transparenţă (alfa)."

#: flatcamGUI/PreferencesUI.py:318 flatcamGUI/PreferencesUI.py:368
#: flatcamGUI/PreferencesUI.py:418
msgid "Alpha Level"
msgstr "Nivel Alfa"

#: flatcamGUI/PreferencesUI.py:320
msgid "Set the fill transparency for plotted objects."
msgstr "Setează nivelul de transparenţă pentru obiectele afisate."

#: flatcamGUI/PreferencesUI.py:337
msgid "Plot Line"
msgstr "Culoare contur"

#: flatcamGUI/PreferencesUI.py:339
msgid "Set the line color for plotted objects."
msgstr "Setează culoarea conturului."

#: flatcamGUI/PreferencesUI.py:351
msgid "Sel. Fill"
msgstr "Culoare Selecţie"

#: flatcamGUI/PreferencesUI.py:353
msgid ""
"Set the fill color for the selection box\n"
"in case that the selection is done from left to right.\n"
"First 6 digits are the color and the last 2\n"
"digits are for alpha (transparency) level."
msgstr ""
"Setează culoarea pentru forma de selectare in cazul\n"
"in care selectia se face de la stânga la dreapta.\n"
"Primii 6 digiti sunt culoarea efectivă și ultimii\n"
"doi sunt pentru nivelul de transparenţă (alfa)."

#: flatcamGUI/PreferencesUI.py:370
msgid "Set the fill transparency for the 'left to right' selection box."
msgstr ""
"Setează transparenţa formei de selecţie când selectia\n"
"se face de la stânga la dreapta."

#: flatcamGUI/PreferencesUI.py:387
msgid "Sel. Line"
msgstr "Contur Selecţie"

#: flatcamGUI/PreferencesUI.py:389
msgid "Set the line color for the 'left to right' selection box."
msgstr ""
"Setează transparenţa conturului formei de selecţie\n"
"când selectia se face de la stânga la dreapta."

#: flatcamGUI/PreferencesUI.py:401
msgid "Sel2. Fill"
msgstr "Culoare Selecţie 2"

#: flatcamGUI/PreferencesUI.py:403
msgid ""
"Set the fill color for the selection box\n"
"in case that the selection is done from right to left.\n"
"First 6 digits are the color and the last 2\n"
"digits are for alpha (transparency) level."
msgstr ""
"Setează culoarea pentru forma de selectare in cazul\n"
"in care selectia se face de la dreapta la stânga.\n"
"Primii 6 digiti sunt culoarea efectiva și ultimii\n"
"doi sunt pentru nivelul de transparenţă (alfa)."

#: flatcamGUI/PreferencesUI.py:420
msgid "Set the fill transparency for selection 'right to left' box."
msgstr ""
"Setează transparenţa formei de selecţie când selectia\n"
"se face de la dreapta la stânga."

#: flatcamGUI/PreferencesUI.py:437
msgid "Sel2. Line"
msgstr "Contur Selecţie 2"

#: flatcamGUI/PreferencesUI.py:439
msgid "Set the line color for the 'right to left' selection box."
msgstr ""
"Setează transparenţa conturului formei de selecţie\n"
"când selectia se face de la dreapta la stânga."

#: flatcamGUI/PreferencesUI.py:451
msgid "Editor Draw"
msgstr "Desen Editor"

#: flatcamGUI/PreferencesUI.py:453
msgid "Set the color for the shape."
msgstr "Setează culoarea pentru forma geometrică din Editor."

#: flatcamGUI/PreferencesUI.py:465
msgid "Editor Draw Sel."
msgstr "Sel. Desen Editor"

#: flatcamGUI/PreferencesUI.py:467
msgid "Set the color of the shape when selected."
msgstr ""
"Setează culoarea formei geometrice in Editor\n"
"când se face o selecţie."

#: flatcamGUI/PreferencesUI.py:479
msgid "Project Items"
msgstr "Elemente Proiect"

#: flatcamGUI/PreferencesUI.py:481
msgid "Set the color of the items in Project Tab Tree."
msgstr "Setează culoarea elementelor din tab-ul Proiect."

#: flatcamGUI/PreferencesUI.py:492
msgid "Proj. Dis. Items"
msgstr "Elem. proj. dez."

#: flatcamGUI/PreferencesUI.py:494
msgid ""
"Set the color of the items in Project Tab Tree,\n"
"for the case when the items are disabled."
msgstr ""
"Setează culoarea elementelor din tab-ul Proiect\n"
"in cazul in care elementele sunt dezactivate."

#: flatcamGUI/PreferencesUI.py:507
msgid "Activity Icon"
msgstr "Icon activitare"

#: flatcamGUI/PreferencesUI.py:509
msgid "Select the GIF that show activity when FlatCAM is active."
msgstr "Selectați GIF-ul care arată activitatea când FlatCAM este activ."

#: flatcamGUI/PreferencesUI.py:555
msgid "GUI Settings"
msgstr "Setări GUI"

#: flatcamGUI/PreferencesUI.py:561
msgid "Layout"
msgstr "Amplasare"

#: flatcamGUI/PreferencesUI.py:563
msgid ""
"Select an layout for FlatCAM.\n"
"It is applied immediately."
msgstr ""
"Selectează un stil de amplasare a elementelor GUI in FlatCAM.\n"
"Se aplică imediat."

#: flatcamGUI/PreferencesUI.py:579
msgid "Style"
msgstr "Stil"

#: flatcamGUI/PreferencesUI.py:581
msgid ""
"Select an style for FlatCAM.\n"
"It will be applied at the next app start."
msgstr ""
"Selectează un stil pentru FlatCAM.\n"
"Se va aplic la următoarea pornire a aplicaţiei."

#: flatcamGUI/PreferencesUI.py:592
msgid "HDPI Support"
msgstr "Suport H-DPI"

#: flatcamGUI/PreferencesUI.py:594
msgid ""
"Enable High DPI support for FlatCAM.\n"
"It will be applied at the next app start."
msgstr ""
"Activează capabilitatea de DPI cu valoare mare.\n"
"Util pentru monitoarele 4k.\n"
"Va fi aplicată la următoarea pornire a aplicaţiei."

#: flatcamGUI/PreferencesUI.py:607 flatcamGUI/PreferencesUI.py:815
msgid "Clear GUI Settings"
msgstr "Șterge Setările GUI"

#: flatcamGUI/PreferencesUI.py:609
msgid ""
"Clear the GUI settings for FlatCAM,\n"
"such as: layout, gui state, style, hdpi support etc."
msgstr ""
"Șterge setările GUI pentru FlatCAM,\n"
"cum ar fi: amplasare, stare UI, suport HDPI sau traducerea."

#: flatcamGUI/PreferencesUI.py:612
msgid "Clear"
msgstr "Șterge"

#: flatcamGUI/PreferencesUI.py:616
msgid "Hover Shape"
msgstr "Forma Hover"

#: flatcamGUI/PreferencesUI.py:618
msgid ""
"Enable display of a hover shape for FlatCAM objects.\n"
"It is displayed whenever the mouse cursor is hovering\n"
"over any kind of not-selected object."
msgstr ""
"Activează o formă când se tine mouse-ul deasupra unui obiect\n"
"in canvas-ul FlatCAM. Forma este afișată doar dacă obiectul \n"
"nu este selectat."

#: flatcamGUI/PreferencesUI.py:625
msgid "Sel. Shape"
msgstr "Forma Sel."

#: flatcamGUI/PreferencesUI.py:627
msgid ""
"Enable the display of a selection shape for FlatCAM objects.\n"
"It is displayed whenever the mouse selects an object\n"
"either by clicking or dragging mouse from left to right or\n"
"right to left."
msgstr ""
"Activează o formă de selectie pt obiectele FlatCAM.\n"
"Se afisează când mouse-ul selectează un obiect\n"
"pe canvas-ul FlatCAM fie făcând click pe obiect fie prin\n"
"crearea unei ferestre de selectie."

#: flatcamGUI/PreferencesUI.py:635
msgid "NB Font Size"
msgstr "Dim. font NB"

#: flatcamGUI/PreferencesUI.py:637
msgid ""
"This sets the font size for the elements found in the Notebook.\n"
"The notebook is the collapsible area in the left side of the GUI,\n"
"and include the Project, Selected and Tool tabs."
msgstr ""
"Aceasta stabilește dimensiunea fontului pentru elementele \n"
"găsite în Notebook.\n"
"Notebook-ul este zona pliabilă din partea stângă a GUI,\n"
"și include filele Proiect, Selectat și Unelte."

#: flatcamGUI/PreferencesUI.py:653
msgid "Axis Font Size"
msgstr "Dim. font axe"

#: flatcamGUI/PreferencesUI.py:655
msgid "This sets the font size for canvas axis."
msgstr "Aceasta setează dimensiunea fontului pentru axele zonei de afisare."

#: flatcamGUI/PreferencesUI.py:669
msgid "Textbox Font Size"
msgstr "Dim. font Textbox"

#: flatcamGUI/PreferencesUI.py:671
msgid ""
"This sets the font size for the Textbox GUI\n"
"elements that are used in FlatCAM."
msgstr ""
"Aceasta setează dimensiunea fontului pentru elementele \n"
"interfața GUI care sunt utilizate în FlatCAM."

#: flatcamGUI/PreferencesUI.py:689
msgid "Splash Screen"
msgstr "Ecran Pornire"

#: flatcamGUI/PreferencesUI.py:691
msgid "Enable display of the splash screen at application startup."
msgstr "Activeaza afisarea unui ecran de pornire la pornirea aplicatiei."

#: flatcamGUI/PreferencesUI.py:701
msgid "Sys Tray Icon"
msgstr "Icon in Sys Tray"

#: flatcamGUI/PreferencesUI.py:703
msgid "Enable display of FlatCAM icon in Sys Tray."
msgstr "Activare pentru afișarea pictogramei FlatCAM în Sys Tray."

#: flatcamGUI/PreferencesUI.py:708
msgid "Shell at StartUp"
msgstr "Shell la pornire"

#: flatcamGUI/PreferencesUI.py:710 flatcamGUI/PreferencesUI.py:715
msgid ""
"Check this box if you want the shell to\n"
"start automatically at startup."
msgstr ""
"Bifează in cazul in care se dorește pornirea\n"
"automata a ferestrei Shell (linia de comanda)\n"
"la initializarea aplicaţiei."

#: flatcamGUI/PreferencesUI.py:720
msgid "Project at StartUp"
msgstr "Proiect la pornire"

#: flatcamGUI/PreferencesUI.py:722 flatcamGUI/PreferencesUI.py:727
msgid ""
"Check this box if you want the project/selected/tool tab area to\n"
"to be shown automatically at startup."
msgstr ""
"Bifează aici daca dorești ca zona Notebook să fie\n"
"afișată automat la pornire."

#: flatcamGUI/PreferencesUI.py:732
msgid "Project AutoHide"
msgstr "Ascundere Proiect"

#: flatcamGUI/PreferencesUI.py:734 flatcamGUI/PreferencesUI.py:740
msgid ""
"Check this box if you want the project/selected/tool tab area to\n"
"hide automatically when there are no objects loaded and\n"
"to show whenever a new object is created."
msgstr ""
"Bifează daca dorești ca zona Notebook să fie ascunsă automat\n"
"când nu sunt obiecte incărcate și să fie afișată automat\n"
"când un obiect nou este creat/incărcat."

#: flatcamGUI/PreferencesUI.py:746
msgid "Enable ToolTips"
msgstr "Activează ToolTip-uri"

#: flatcamGUI/PreferencesUI.py:748 flatcamGUI/PreferencesUI.py:753
msgid ""
"Check this box if you want to have toolTips displayed\n"
"when hovering with mouse over items throughout the App."
msgstr ""
"Bifează daca dorești ca să fie afisate texte explicative când se\n"
"tine mouse-ul deasupra diverselor texte din FlatCAM."

#: flatcamGUI/PreferencesUI.py:784
msgid "Delete object confirmation"
msgstr "Confirmare de ștergere a obiectului"

#: flatcamGUI/PreferencesUI.py:786
msgid ""
"When checked the application will ask for user confirmation\n"
"whenever the Delete object(s) event is triggered, either by\n"
"menu shortcut or key shortcut."
msgstr ""
"Când este bifat, aplicația va cere confirmarea utilizatorului\n"
"ori de câte ori este declanșat evenimentul de Ștergere a \n"
"unor obiecte, fie de cu ajutorul meniurilor sau cu combinatii de taste."

#: flatcamGUI/PreferencesUI.py:812
msgid "Are you sure you want to delete the GUI Settings? \n"
msgstr "Esti sigur că dorești să ștergi setările GUI?\n"

#: flatcamGUI/PreferencesUI.py:836
msgid "App Preferences"
msgstr "Preferințele Aplicaţie"

#: flatcamGUI/PreferencesUI.py:842 flatcamGUI/PreferencesUI.py:1349
#: flatcamGUI/PreferencesUI.py:2192 flatcamTools/ToolMeasurement.py:43
#: flatcamTools/ToolPcbWizard.py:127 flatcamTools/ToolProperties.py:133
msgid "Units"
msgstr "Unităti"

#: flatcamGUI/PreferencesUI.py:843
msgid ""
"The default value for FlatCAM units.\n"
"Whatever is selected here is set every time\n"
"FLatCAM is started."
msgstr ""
"Unitatea de masura pt FlatCAM.\n"
"Este setată la fiecare pornire a programului."

#: flatcamGUI/PreferencesUI.py:846
msgid "IN"
msgstr "Inch"

#: flatcamGUI/PreferencesUI.py:847 flatcamGUI/PreferencesUI.py:1355
#: flatcamGUI/PreferencesUI.py:1787 flatcamGUI/PreferencesUI.py:2198
#: flatcamTools/ToolCalculators.py:61 flatcamTools/ToolPcbWizard.py:126
msgid "MM"
msgstr "MM"

#: flatcamGUI/PreferencesUI.py:850
msgid "Graphic Engine"
msgstr "Motor grafic"

#: flatcamGUI/PreferencesUI.py:851
msgid ""
"Choose what graphic engine to use in FlatCAM.\n"
"Legacy(2D) -> reduced functionality, slow performance but enhanced "
"compatibility.\n"
"OpenGL(3D) -> full functionality, high performance\n"
"Some graphic cards are too old and do not work in OpenGL(3D) mode, like:\n"
"Intel HD3000 or older. In this case the plot area will be black therefore\n"
"use the Legacy(2D) mode."
msgstr ""
"Alegeți ce motor grafic să utilizați în FlatCAM.\n"
"Legacy (2D) -> funcționalitate redusă, performanțe lente, dar "
"compatibilitate îmbunătățită.\n"
"OpenGL (3D) -> funcționalitate completă, performanță ridicată\n"
"Unele placi video sunt prea vechi și nu funcționează în modul OpenGL (3D), "
"cum ar fi:\n"
"Intel HD3000 sau mai vechi. În acest caz, suprafața de afisare va fi neagră\n"
"prin urmare folosiți modul Legacy (2D)."

#: flatcamGUI/PreferencesUI.py:857
msgid "Legacy(2D)"
msgstr "Legacy(2D)"

#: flatcamGUI/PreferencesUI.py:858
msgid "OpenGL(3D)"
msgstr "OpenGL(3D)"

#: flatcamGUI/PreferencesUI.py:861
msgid "APP. LEVEL"
msgstr "Nivel aplicatie"

#: flatcamGUI/PreferencesUI.py:862
msgid ""
"Choose the default level of usage for FlatCAM.\n"
"BASIC level -> reduced functionality, best for beginner's.\n"
"ADVANCED level -> full functionality.\n"
"\n"
"The choice here will influence the parameters in\n"
"the Selected Tab for all kinds of FlatCAM objects."
msgstr ""
"Nivelul default de utilizare pt FlatCAM.\n"
"Nivel BAZA -> functionalitate simplificata, potrivit pt incepatori\n"
"Nivel AVANSAT -> functionalitate completa.\n"
"\n"
"Alegerea efectuata aici va influenta ce aparamtri sunt disponibili\n"
"in Tab-ul SELECTAT dar și in alte parti ale FlatCAM."

#: flatcamGUI/PreferencesUI.py:871
msgid "Portable app"
msgstr "Aplicație portabilă"

#: flatcamGUI/PreferencesUI.py:872
msgid ""
"Choose if the application should run as portable.\n"
"\n"
"If Checked the application will run portable,\n"
"which means that the preferences files will be saved\n"
"in the application folder, in the lib\\config subfolder."
msgstr ""
"Alegeți dacă aplicația ar trebui să funcționeze in modul portabil.\n"
"\n"
"Dacă e bifat, aplicația va rula portabil,\n"
"ceea ce înseamnă că fișierele de preferințe vor fi salvate\n"
"în folderul aplicației, în subfolderul lib \\ config."

#: flatcamGUI/PreferencesUI.py:879
msgid "Languages"
msgstr "Traduceri"

#: flatcamGUI/PreferencesUI.py:880
msgid "Set the language used throughout FlatCAM."
msgstr "Setează limba folosita pentru textele din FlatCAM."

#: flatcamGUI/PreferencesUI.py:883
msgid "Apply Language"
msgstr "Aplica Traducere"

#: flatcamGUI/PreferencesUI.py:884
msgid ""
"Set the language used throughout FlatCAM.\n"
"The app will restart after click.Windows: When FlatCAM is installed in "
"Program Files\n"
"directory, it is possible that the app will not\n"
"restart after the button is clicked due of Windows\n"
"security features. In this case the language will be\n"
"applied at the next app start."
msgstr ""
"Seteaza limba folosită in FlatCAM.\n"
"Aplicatia se va restarta după click.\n"
"Windows: cand FlatCAM este instalat in directorul\n"
"Program Files este posibil ca aplicatia să nu se restarteze\n"
"după click datorită unor setări de securitate ale Windows."

#: flatcamGUI/PreferencesUI.py:893
msgid "Version Check"
msgstr "Verificare versiune"

#: flatcamGUI/PreferencesUI.py:895 flatcamGUI/PreferencesUI.py:900
msgid ""
"Check this box if you want to check\n"
"for a new version automatically at startup."
msgstr ""
"Bifează daca se dorește verificarea automata\n"
"daca exista o versiune mai noua,\n"
"la pornirea aplicaţiei."

#: flatcamGUI/PreferencesUI.py:905
msgid "Send Stats"
msgstr "Statistici"

#: flatcamGUI/PreferencesUI.py:907 flatcamGUI/PreferencesUI.py:912
msgid ""
"Check this box if you agree to send anonymous\n"
"stats automatically at startup, to help improve FlatCAM."
msgstr ""
"Bifează daca esti de acord ca aplicaţia să trimita la pornire\n"
"un set de informatii cu privire la modul in care folosești\n"
"aplicaţia. In acest fel dezvoltatorii vor sti unde să se focalizeze\n"
"in crearea de inbunatatiri."

#: flatcamGUI/PreferencesUI.py:919
msgid "Pan Button"
msgstr "Buton Pan (mișcare)"

#: flatcamGUI/PreferencesUI.py:920
msgid ""
"Select the mouse button to use for panning:\n"
"- MMB --> Middle Mouse Button\n"
"- RMB --> Right Mouse Button"
msgstr ""
"Selectează butonul folosit pentru 'mișcare':\n"
"- MMB - butonul din mijloc al mouse-ului\n"
"- RMB - butonul in dreapta al mouse-ului"

#: flatcamGUI/PreferencesUI.py:923
msgid "MMB"
msgstr "MMB"

#: flatcamGUI/PreferencesUI.py:924
msgid "RMB"
msgstr "RMB"

#: flatcamGUI/PreferencesUI.py:927
msgid "Multiple Sel"
msgstr "Sel. multiplă"

#: flatcamGUI/PreferencesUI.py:928
msgid "Select the key used for multiple selection."
msgstr "Selectează tasta folosita pentru selectia multipla."

#: flatcamGUI/PreferencesUI.py:929
msgid "CTRL"
msgstr "CTRL"

#: flatcamGUI/PreferencesUI.py:930
msgid "SHIFT"
msgstr "SHIFT"

#: flatcamGUI/PreferencesUI.py:933
msgid "Workers number"
msgstr "Număr de worker's"

#: flatcamGUI/PreferencesUI.py:935 flatcamGUI/PreferencesUI.py:944
msgid ""
"The number of Qthreads made available to the App.\n"
"A bigger number may finish the jobs more quickly but\n"
"depending on your computer speed, may make the App\n"
"unresponsive. Can have a value between 2 and 16.\n"
"Default value is 2.\n"
"After change, it will be applied at next App start."
msgstr ""
"Număarul de QThread-uri care sunt disponibile pt aplicatie.\n"
"Un număr mai mare va permite terminarea operatiilor mai rapida\n"
"dar in functie de cat de rapid este calculatorul, poate face ca aplicatia\n"
"sa devina temporar blocată. Poate lua o valoare intre 2 si 16.\n"
"Valoarea standard este 2.\n"
"Dupa schimbarea valoarii, se va aplica la următoarea pornire a aplicatiei."

#: flatcamGUI/PreferencesUI.py:954
msgid "Geo Tolerance"
msgstr "Toleranta geometrică"

#: flatcamGUI/PreferencesUI.py:956 flatcamGUI/PreferencesUI.py:965
msgid ""
"This value can counter the effect of the Circle Steps\n"
"parameter. Default value is 0.01.\n"
"A lower value will increase the detail both in image\n"
"and in Gcode for the circles, with a higher cost in\n"
"performance. Higher value will provide more\n"
"performance at the expense of level of detail."
msgstr ""
"Această valoare afectează efectul prametrului Pasi Cerc.\n"
"Valoarea default este 0.01.\n"
"O valoare mai mică va creste detaliile atat in imagine cat si\n"
"in GCode pentru cercuri dar cu pretul unei scăderi in performantă.\n"
"O valoare mai mare va oferi mai multă performantă dar in\n"
"defavoarea nievelului de detalii."

#: flatcamGUI/PreferencesUI.py:1002
msgid "\"Open\" behavior"
msgstr "Stil \"Încarcare\""

#: flatcamGUI/PreferencesUI.py:1004
msgid ""
"When checked the path for the last saved file is used when saving files,\n"
"and the path for the last opened file is used when opening files.\n"
"\n"
"When unchecked the path for opening files is the one used last: either the\n"
"path for saving files or the path for opening files."
msgstr ""
"Cand este bifat, calea de salvare a ultimului fiser salvat este folosită "
"cand se \n"
"salvează fisiere si calea de deschidere pt ultimul fisier este folosită cand "
"se \n"
"deschide fisiere.\n"
"\n"
"Cand este debifat, calea de deshidere pt ultimul fisier este folosită pt "
"ambele \n"
"cazuri: fie că se deschide un fisier, fie că se salvează un fisier."

#: flatcamGUI/PreferencesUI.py:1013
msgid "Save Compressed Project"
msgstr "Salvează Proiectul comprimat"

#: flatcamGUI/PreferencesUI.py:1015
msgid ""
"Whether to save a compressed or uncompressed project.\n"
"When checked it will save a compressed FlatCAM project."
msgstr ""
"Daca să se salveze proiectul in mod arhivat.\n"
"Când este bifat aici, se va salva o arhiva a proiectului\n"
"lucru care poate reduce dimensiunea semnificativ."

#: flatcamGUI/PreferencesUI.py:1026
msgid "Compression Level"
msgstr "Nivel compresie"

#: flatcamGUI/PreferencesUI.py:1028
msgid ""
"The level of compression used when saving\n"
"a FlatCAM project. Higher value means better compression\n"
"but require more RAM usage and more processing time."
msgstr ""
"Nivelul de compresie folosit când se salvează un proiect FlatCAM.\n"
"Valorile posibile sunt [0 ... 9]. Valoarea 0 inseamna compresie minimala\n"
"dar cu consum redus de resurse in timp ce valoarea 9 cere multa memorie RAM\n"
"și in plus, durează semnificativ mai mult."

#: flatcamGUI/PreferencesUI.py:1055
msgid "Gerber General"
msgstr "Gerber General"

#: flatcamGUI/PreferencesUI.py:1086 flatcamGUI/PreferencesUI.py:2600
#: flatcamGUI/PreferencesUI.py:3030
msgid "Circle Steps"
msgstr "Pași pt. cerc"

#: flatcamGUI/PreferencesUI.py:1088
msgid ""
"The number of circle steps for Gerber \n"
"circular aperture linear approximation."
msgstr ""
"Numărul de segmente utilizate pentru\n"
"aproximarea lineara a aperturilor Gerber circulare."

#: flatcamGUI/PreferencesUI.py:1103
msgid "Gerber Options"
msgstr "Opțiuni Gerber"

#: flatcamGUI/PreferencesUI.py:1235
msgid "Gerber Adv. Options"
msgstr "Opțiuni Av. Gerber"

#: flatcamGUI/PreferencesUI.py:1238 flatcamGUI/PreferencesUI.py:2063
#: flatcamGUI/PreferencesUI.py:2803
msgid "Advanced Options"
msgstr "Opțiuni avansate"

#: flatcamGUI/PreferencesUI.py:1240
msgid ""
"A list of Gerber advanced parameters.\n"
"Those parameters are available only for\n"
"Advanced App. Level."
msgstr ""
"O lista de parametri Gerber avansati.\n"
"Acesti parametri sunt disponibili doar\n"
"când este selectat Nivelul Avansat pentru\n"
"aplicaţie in Preferințe - > General."

#: flatcamGUI/PreferencesUI.py:1259
msgid "Table Show/Hide"
msgstr "Arata/Ascunde Tabela"

#: flatcamGUI/PreferencesUI.py:1261
msgid ""
"Toggle the display of the Gerber Apertures Table.\n"
"Also, on hide, it will delete all mark shapes\n"
"that are drawn on canvas."
msgstr ""
"Comută afișarea tabelei de aperturi Gerber.\n"
"când se ascunde aceasta, se vor șterge și toate\n"
"posibil afisatele marcaje ale aperturilor."

#: flatcamGUI/PreferencesUI.py:1271
msgid ""
"Buffering type:\n"
"- None --> best performance, fast file loading but no so good display\n"
"- Full --> slow file loading but good visuals. This is the default.\n"
"<<WARNING>>: Don't change this unless you know what you are doing !!!"
msgstr ""
"Tip de buferare:\n"
"- Nimic --> performanta superioară, incărcare rapidă a fisierului dar "
"afisarea nu este prea bună\n"
"- Complet --> incărcare lentă dar calitate vizuală bună. Aceasta este "
"valoarea de bază.\n"
"<<ATENTIE>>: Nu schimba această valoare decat dacă stii ce faci !!!"

#: flatcamGUI/PreferencesUI.py:1276 flatcamTools/ToolProperties.py:298
#: flatcamTools/ToolProperties.py:312 flatcamTools/ToolProperties.py:315
#: flatcamTools/ToolProperties.py:318
msgid "None"
msgstr "Nimic"

#: flatcamGUI/PreferencesUI.py:1277
msgid "Full"
msgstr "Complet"

#: flatcamGUI/PreferencesUI.py:1282
msgid "Simplify"
msgstr "Simplifica"

#: flatcamGUI/PreferencesUI.py:1283
msgid ""
"When checked all the Gerber polygons will be\n"
"loaded with simplification having a set tolerance."
msgstr ""
"Cand este bifat, toate poligoanele Gerber vor fi incarcate\n"
"simplificat cu o anumita toleranta setata mai jos."

#: flatcamGUI/PreferencesUI.py:1288
msgid "Tolerance"
msgstr "Toleranta"

#: flatcamGUI/PreferencesUI.py:1289
msgid "Tolerance for poligon simplification."
msgstr "Toleranta pentru simplificarea poligoanelor."

#: flatcamGUI/PreferencesUI.py:1335
msgid "Gerber Export"
msgstr "Export Gerber"

#: flatcamGUI/PreferencesUI.py:1338 flatcamGUI/PreferencesUI.py:2181
msgid "Export Options"
msgstr "Opțiuni de Export"

#: flatcamGUI/PreferencesUI.py:1340
msgid ""
"The parameters set here are used in the file exported\n"
"when using the File -> Export -> Export Gerber menu entry."
msgstr ""
"Acesti parametri listati aici sunt folositi atunci când\n"
"se exporta un fişier Gerber folosind:\n"
"File -> Exportă -> Exportă Gerber."

#: flatcamGUI/PreferencesUI.py:1351 flatcamGUI/PreferencesUI.py:1357
msgid "The units used in the Gerber file."
msgstr "Unitătile de măsură folosite in fişierul Gerber."

#: flatcamGUI/PreferencesUI.py:1354 flatcamGUI/PreferencesUI.py:1684
#: flatcamGUI/PreferencesUI.py:1786 flatcamGUI/PreferencesUI.py:2197
#: flatcamTools/ToolCalculators.py:60 flatcamTools/ToolPcbWizard.py:125
msgid "INCH"
msgstr "Inch"

#: flatcamGUI/PreferencesUI.py:1363 flatcamGUI/PreferencesUI.py:2206
msgid "Int/Decimals"
msgstr "Înt/Zecimale"

#: flatcamGUI/PreferencesUI.py:1365
msgid ""
"The number of digits in the whole part of the number\n"
"and in the fractional part of the number."
msgstr ""
"Acest număr reprezinta numărul de digiti din partea\n"
"intreagă si in partea fractională a numărului."

#: flatcamGUI/PreferencesUI.py:1376
msgid ""
"This numbers signify the number of digits in\n"
"the whole part of Gerber coordinates."
msgstr ""
"Acest număr reprezinta numărul de digiti din partea\n"
"intreagă a coordonatelor Gerber."

#: flatcamGUI/PreferencesUI.py:1390
msgid ""
"This numbers signify the number of digits in\n"
"the decimal part of Gerber coordinates."
msgstr ""
"Acest număr reprezinta numărul de digiti din partea\n"
"zecimală a coordonatelor Gerber."

#: flatcamGUI/PreferencesUI.py:1399 flatcamGUI/PreferencesUI.py:2267
msgid "Zeros"
msgstr "Zero-uri"

#: flatcamGUI/PreferencesUI.py:1402 flatcamGUI/PreferencesUI.py:1412
msgid ""
"This sets the type of Gerber zeros.\n"
"If LZ then Leading Zeros are removed and\n"
"Trailing Zeros are kept.\n"
"If TZ is checked then Trailing Zeros are removed\n"
"and Leading Zeros are kept."
msgstr ""
"Aici se setează tipul de suprimare a zerourilor,\n"
"in cazul unui fişier Gerber.\n"
"TZ = zerourile din fata numărului sunt păstrate și\n"
"cele de la final sunt indepărtate.\n"
"LZ = zerourile din fata numărului sunt indepărtate și\n"
"cele de la final sunt păstrate.\n"
"(Invers fată de fişierele Excellon)."

#: flatcamGUI/PreferencesUI.py:1409 flatcamGUI/PreferencesUI.py:1762
#: flatcamGUI/PreferencesUI.py:2277 flatcamTools/ToolPcbWizard.py:111
msgid "LZ"
msgstr "LZ"

#: flatcamGUI/PreferencesUI.py:1410 flatcamGUI/PreferencesUI.py:1763
#: flatcamGUI/PreferencesUI.py:2278 flatcamTools/ToolPcbWizard.py:112
msgid "TZ"
msgstr "TZ"

#: flatcamGUI/PreferencesUI.py:1434
msgid "A list of Gerber Editor parameters."
msgstr "O listă de parametri ai Editorului Gerber."

#: flatcamGUI/PreferencesUI.py:1442 flatcamGUI/PreferencesUI.py:2341
#: flatcamGUI/PreferencesUI.py:2944
msgid "Selection limit"
msgstr "Limita selecţie"

#: flatcamGUI/PreferencesUI.py:1444
msgid ""
"Set the number of selected Gerber geometry\n"
"items above which the utility geometry\n"
"becomes just a selection rectangle.\n"
"Increases the performance when moving a\n"
"large number of geometric elements."
msgstr ""
"Setează numărul de geometrii selectate peste care\n"
"geometria utilitară devine un simplu pătrat de selectie.\n"
"Creste performanta cand se mută un număr mai mare\n"
"de elemente geometrice."

#: flatcamGUI/PreferencesUI.py:1456
msgid "New Aperture code"
msgstr "Cod pt aperture noua"

#: flatcamGUI/PreferencesUI.py:1468
msgid "New Aperture size"
msgstr "Dim. pt aperture noua"

#: flatcamGUI/PreferencesUI.py:1470
msgid "Size for the new aperture"
msgstr "Dim. pentru noua apertură"

#: flatcamGUI/PreferencesUI.py:1480
msgid "New Aperture type"
msgstr "Tip pt noua apaertura"

#: flatcamGUI/PreferencesUI.py:1482
msgid ""
"Type for the new aperture.\n"
"Can be 'C', 'R' or 'O'."
msgstr ""
"Tipul noii aperture.\n"
"Poate fi „C”, „R” sau „O”."

#: flatcamGUI/PreferencesUI.py:1503
msgid "Aperture Dimensions"
msgstr "Dim. aper"

#: flatcamGUI/PreferencesUI.py:1505 flatcamGUI/PreferencesUI.py:2616
#: flatcamGUI/PreferencesUI.py:3304
msgid "Diameters of the cutting tools, separated by ','"
msgstr "Diametrele pentru unelte tăietoare, separate cu virgula"

#: flatcamGUI/PreferencesUI.py:1511
msgid "Linear Pad Array"
msgstr "Arie Lineară de Sloturi"

#: flatcamGUI/PreferencesUI.py:1515 flatcamGUI/PreferencesUI.py:2382
#: flatcamGUI/PreferencesUI.py:2513
msgid "Linear Dir."
msgstr "Dir. Lineara"

#: flatcamGUI/PreferencesUI.py:1551
msgid "Circular Pad Array"
msgstr "Arie de Sloturi circ"

#: flatcamGUI/PreferencesUI.py:1555 flatcamGUI/PreferencesUI.py:2422
#: flatcamGUI/PreferencesUI.py:2553
msgid "Circular Dir."
msgstr "Directie circ."

#: flatcamGUI/PreferencesUI.py:1557 flatcamGUI/PreferencesUI.py:2424
#: flatcamGUI/PreferencesUI.py:2555
msgid ""
"Direction for circular array.\n"
"Can be CW = clockwise or CCW = counter clockwise."
msgstr ""
"Directia pentru aria circulară.\n"
"Poate fi CW = in sensul acelor de ceasornic sau CCW = invers acelor de "
"ceasornic."

#: flatcamGUI/PreferencesUI.py:1568 flatcamGUI/PreferencesUI.py:2435
#: flatcamGUI/PreferencesUI.py:2566
msgid "Circ. Angle"
msgstr "Unghi circ."

#: flatcamGUI/PreferencesUI.py:1583
msgid "Distance at which to buffer the Gerber element."
msgstr "Distanța la care se bufferează elementul Gerber."

#: flatcamGUI/PreferencesUI.py:1590
msgid "Scale Tool"
msgstr "Unalta de Scalare"

#: flatcamGUI/PreferencesUI.py:1596
msgid "Factor to scale the Gerber element."
msgstr "Factor pentru scalarea elementului Gerber."

#: flatcamGUI/PreferencesUI.py:1607
msgid "Threshold low"
msgstr "Prag minim"

#: flatcamGUI/PreferencesUI.py:1609
msgid "Threshold value under which the apertures are not marked."
msgstr "Valoarea pragului sub care aperturile nu sunt marcate."

#: flatcamGUI/PreferencesUI.py:1617
msgid "Threshold high"
msgstr "Prag mare"

#: flatcamGUI/PreferencesUI.py:1619
msgid "Threshold value over which the apertures are not marked."
msgstr "Valoarea pragului peste care nu sunt marcate aperturile."

#: flatcamGUI/PreferencesUI.py:1635
msgid "Excellon General"
msgstr "Excellon General"

#: flatcamGUI/PreferencesUI.py:1657
msgid "Excellon Format"
msgstr "Format Excellon"

#: flatcamGUI/PreferencesUI.py:1659
msgid ""
"The NC drill files, usually named Excellon files\n"
"are files that can be found in different formats.\n"
"Here we set the format used when the provided\n"
"coordinates are not using period.\n"
"\n"
"Possible presets:\n"
"\n"
"PROTEUS 3:3 MM LZ\n"
"DipTrace 5:2 MM TZ\n"
"DipTrace 4:3 MM LZ\n"
"\n"
"EAGLE 3:3 MM TZ\n"
"EAGLE 4:3 MM TZ\n"
"EAGLE 2:5 INCH TZ\n"
"EAGLE 3:5 INCH TZ\n"
"\n"
"ALTIUM 2:4 INCH LZ\n"
"Sprint Layout 2:4 INCH LZ\n"
"KiCAD 3:5 INCH TZ"
msgstr ""
"Fişierele de găurire NC drills numite generic Excellon\n"
"sunt fişiere care nu respecta clar un format.\n"
"Fiecare companie și-a aplicat propria viziune aşa încât\n"
"s-a ajuns că nu se poate face o recunoaștere automata\n"
"a formatului Excellon in fiecare caz.\n"
"Aici putem seta manual ce format ne asteptăm să gasim,\n"
"când coordonatele nu sunt reprezentate cu\n"
"separator zecimal.\n"
"\n"
"Setări posibile:\n"
"\n"
"PROTEUS 3:3 MM LZ\n"
"DipTrace 5:2 MM TZ\n"
"DipTrace 4:3 MM LZ\n"
"\n"
"EAGLE 3:3 MM TZ\n"
"EAGLE 4:3 MM TZ\n"
"EAGLE 2:5 INCH TZ\n"
"EAGLE 3:5 INCH TZ\n"
"\n"
"ALTIUM 2:4 INCH LZ\n"
"Sprint Layout 2:4 INCH LZ\n"
"KiCAD 3:5 INCH TZ"

#: flatcamGUI/PreferencesUI.py:1687
msgid "Default values for INCH are 2:4"
msgstr ""
"Valorile default pentru Inch sunt 2:4\n"
"adica 2 parti intregi și 4 zecimale"

#: flatcamGUI/PreferencesUI.py:1695 flatcamGUI/PreferencesUI.py:1728
#: flatcamGUI/PreferencesUI.py:2221
msgid ""
"This numbers signify the number of digits in\n"
"the whole part of Excellon coordinates."
msgstr ""
"Acest număr reprezinta numărul de digiti din partea\n"
"intreaga a coordonatelor Excellon."

#: flatcamGUI/PreferencesUI.py:1709 flatcamGUI/PreferencesUI.py:1742
#: flatcamGUI/PreferencesUI.py:2235
msgid ""
"This numbers signify the number of digits in\n"
"the decimal part of Excellon coordinates."
msgstr ""
"Acest număr reprezinta numărul de digiti din partea\n"
"zecimala a coordonatelor Excellon."

#: flatcamGUI/PreferencesUI.py:1717
msgid "METRIC"
msgstr "Metric"

#: flatcamGUI/PreferencesUI.py:1720
msgid "Default values for METRIC are 3:3"
msgstr ""
"Valorile default pentru Metric sunt 3:3\n"
"adica 3 parti intregi și 3 zecimale"

#: flatcamGUI/PreferencesUI.py:1751
msgid "Default <b>Zeros</b>"
msgstr "Suprimare <b>Zero</b>"

#: flatcamGUI/PreferencesUI.py:1754 flatcamGUI/PreferencesUI.py:2270
msgid ""
"This sets the type of Excellon zeros.\n"
"If LZ then Leading Zeros are kept and\n"
"Trailing Zeros are removed.\n"
"If TZ is checked then Trailing Zeros are kept\n"
"and Leading Zeros are removed."
msgstr ""
"Aici se setează tipul de suprimare a zerourilor,\n"
"in cazul unui fişier Excellon.\n"
"LZ = zerourile din fata numărului sunt pastrate și\n"
"cele de la final sunt indepartate.\n"
"TZ = zerourile din fata numărului sunt indepartate și\n"
"cele de la final sunt pastrate.\n"
"(Invers fata de fişierele Gerber)."

#: flatcamGUI/PreferencesUI.py:1765
msgid ""
"This sets the default type of Excellon zeros.\n"
"If it is not detected in the parsed file the value here\n"
"will be used.If LZ then Leading Zeros are kept and\n"
"Trailing Zeros are removed.\n"
"If TZ is checked then Trailing Zeros are kept\n"
"and Leading Zeros are removed."
msgstr ""
"Aici se setează tipul de suprimare a zerourilor,\n"
"in cazul unui fişier Excellon.\n"
"Daca nu se poate face detectia automata la parsarea\n"
"fişierului Excellon, se folosesc aceste valori.\n"
"LZ = zerourile din fata numărului sunt pastrate și\n"
"cele de la final sunt indepartate.\n"
"TZ = zerourile din fata numărului sunt indepartate și\n"
"cele de la final sunt pastrate.\n"
"(Invers fata de fişierele Gerber)."

#: flatcamGUI/PreferencesUI.py:1775
msgid "Default <b>Units</b>"
msgstr "<b>Unitati</b> Excellon"

#: flatcamGUI/PreferencesUI.py:1778
msgid ""
"This sets the default units of Excellon files.\n"
"If it is not detected in the parsed file the value here\n"
"will be used.Some Excellon files don't have an header\n"
"therefore this parameter will be used."
msgstr ""
"Aceasta valoare este valoarea la care se recurge\n"
"in cazul in care nu se poate determina automat\n"
"atunci când se face parsarea fişierlui Excellon.\n"
"Unele fişiere de găurire (Excellon) nu au header\n"
"(unde se gasesc unitatile) și atunci se va folosi\n"
"aceasta valoare."

#: flatcamGUI/PreferencesUI.py:1789
msgid ""
"This sets the units of Excellon files.\n"
"Some Excellon files don't have an header\n"
"therefore this parameter will be used."
msgstr ""
"Aceasta valoare este valoarea la care se recurge\n"
"in cazul in care nu se poate determina automat\n"
"atunci când se face parsarea fişierlui Excellon.\n"
"Unele fişiere de găurire (Excellon) nu au header\n"
"(unde se gasesc unitatile) și atunci se va folosi\n"
"aceasta valoare."

#: flatcamGUI/PreferencesUI.py:1795
msgid "Update Export settings"
msgstr "Actualizeaza setarile de Export"

#: flatcamGUI/PreferencesUI.py:1803
msgid "Excellon Optimization"
msgstr "Optimizare Excellon"

#: flatcamGUI/PreferencesUI.py:1806
msgid "Algorithm:"
msgstr "Algoritm:"

#: flatcamGUI/PreferencesUI.py:1808 flatcamGUI/PreferencesUI.py:1825
msgid ""
"This sets the optimization type for the Excellon drill path.\n"
"If <<MetaHeuristic>> is checked then Google OR-Tools algorithm with\n"
"MetaHeuristic Guided Local Path is used. Default search time is 3sec.\n"
"If <<Basic>> is checked then Google OR-Tools Basic algorithm is used.\n"
"If <<TSA>> is checked then Travelling Salesman algorithm is used for\n"
"drill path optimization.\n"
"\n"
"If this control is disabled, then FlatCAM works in 32bit mode and it uses\n"
"Travelling Salesman algorithm for path optimization."
msgstr ""
"Aceasta setează tipul de optimizare pentru calea de găurire Excellon.\n"
"Dacă <<MetaHeuristic>> este bifat, atunci algoritmul Google OR-Tools cu\n"
"Calea locală ghidată MetaHeuristic este utilizat. Timpul implicit de căutare "
"este de 3 secunde.\n"
"Dacă <<Basic>> este bifat, atunci algoritmul Google OR-Tools Basic este "
"utilizat.\n"
"Dacă <<TSA>> este bifat, atunci algoritmul Traveling Salesman este utilizat "
"pentru\n"
"optimizarea căii de găurire\n"
"\n"
"Dacă acest control este dezactivat, FlatCAM funcționează în modul 32 biți și "
"folosește\n"
"Algoritmul Traveling Salesman pentru optimizarea căii."

#: flatcamGUI/PreferencesUI.py:1820
msgid "MetaHeuristic"
msgstr "MetaHeuristic"

#: flatcamGUI/PreferencesUI.py:1822
msgid "TSA"
msgstr "TSA"

#: flatcamGUI/PreferencesUI.py:1837
msgid "Optimization Time"
msgstr "Durata optimiz."

#: flatcamGUI/PreferencesUI.py:1840
msgid ""
"When OR-Tools Metaheuristic (MH) is enabled there is a\n"
"maximum threshold for how much time is spent doing the\n"
"path optimization. This max duration is set here.\n"
"In seconds."
msgstr ""
"Când se foloseşte optimziarea MH, aceasta valoare\n"
"reprezinta cat timp se sta pentru fiecare element in\n"
"incercarea de a afla calea optima."

#: flatcamGUI/PreferencesUI.py:1883
msgid "Excellon Options"
msgstr "Opțiuni Excellon"

#: flatcamGUI/PreferencesUI.py:1888
msgid ""
"Parameters used to create a CNC Job object\n"
"for this drill object."
msgstr ""
"Parametrii folositi pentru a crea un obiect FlatCAM tip CNCJob\n"
"din acest obiect Excellon."

#: flatcamGUI/PreferencesUI.py:1926 flatcamGUI/PreferencesUI.py:2707
msgid "Toolchange Z"
msgstr "Z schimb. unealtă"

#: flatcamGUI/PreferencesUI.py:1958
msgid "Spindle Speed"
msgstr "Viteza Motor"

#: flatcamGUI/PreferencesUI.py:1973 flatcamGUI/PreferencesUI.py:2768
msgid "Duration"
msgstr "Durată"

#: flatcamGUI/PreferencesUI.py:2001
msgid ""
"Choose what to use for GCode generation:\n"
"'Drills', 'Slots' or 'Both'.\n"
"When choosing 'Slots' or 'Both', slots will be\n"
"converted to drills."
msgstr ""
"Alege ce anume să fie folot ca sursa pentru generarea de GCode:\n"
"- Găuri\n"
"- Sloturi\n"
"- Ambele.\n"
"Când se alege Sloturi sau Ambele, sloturile vor fi convertite in serii de "
"găuri."

#: flatcamGUI/PreferencesUI.py:2044
msgid "Defaults"
msgstr "Val. Implicite"

#: flatcamGUI/PreferencesUI.py:2057
msgid "Excellon Adv. Options"
msgstr "Opțiuni Avans. Excellon"

#: flatcamGUI/PreferencesUI.py:2065
msgid ""
"A list of Excellon advanced parameters.\n"
"Those parameters are available only for\n"
"Advanced App. Level."
msgstr ""
"O lista de parametri Excellon avansati.\n"
"Acesti parametri sunt disponibili doar\n"
"când este selectat Nivelul Avansat pentru\n"
"aplicaţie in Preferințe - > General."

#: flatcamGUI/PreferencesUI.py:2083
msgid "Toolchange X,Y"
msgstr "X,Y schimb. unealtă"

#: flatcamGUI/PreferencesUI.py:2085 flatcamGUI/PreferencesUI.py:2817
msgid "Toolchange X,Y position."
msgstr "Poziţia X,Y in format (x,y) unde se face schimbarea uneltei."

#: flatcamGUI/PreferencesUI.py:2133 flatcamGUI/PreferencesUI.py:2876
msgid "Spindle dir."
msgstr "Directie Motor"

#: flatcamGUI/PreferencesUI.py:2135 flatcamGUI/PreferencesUI.py:2878
msgid ""
"This sets the direction that the spindle is rotating.\n"
"It can be either:\n"
"- CW = clockwise or\n"
"- CCW = counter clockwise"
msgstr ""
"Aici se setează directia in care motorul se roteste.\n"
"Poate fi:\n"
"- CW = in sensul acelor de ceasornic\n"
"- CCW = in sensul invers acelor de ceasornic"

#: flatcamGUI/PreferencesUI.py:2146 flatcamGUI/PreferencesUI.py:2890
msgid "Fast Plunge"
msgstr "Plonjare rapidă"

#: flatcamGUI/PreferencesUI.py:2148 flatcamGUI/PreferencesUI.py:2892
msgid ""
"By checking this, the vertical move from\n"
"Z_Toolchange to Z_move is done with G0,\n"
"meaning the fastest speed available.\n"
"WARNING: the move is done at Toolchange X,Y coords."
msgstr ""
"Prin bifarea de aici, mișcarea de la Înălţimea unde se face schimbarea "
"uneltei\n"
"pana la Înălţimea unde se face deplasarea între taieri, se va face cu "
"comanda G0.\n"
"Aceasta inseamna că se va folosi viteza maxima disponibila.\n"
"\n"
"ATENTIE: mișcarea aceasta pe verticala se face la coordonatele X, Y unde se "
"schimba\n"
"unealta. Daca aveti ceva plasat sub unealtă ceva se va strica."

#: flatcamGUI/PreferencesUI.py:2157
msgid "Fast Retract"
msgstr "Retragere rapida"

#: flatcamGUI/PreferencesUI.py:2159
msgid ""
"Exit hole strategy.\n"
" - When uncheked, while exiting the drilled hole the drill bit\n"
"will travel slow, with set feedrate (G1), up to zero depth and then\n"
"travel as fast as possible (G0) to the Z Move (travel height).\n"
" - When checked the travel from Z cut (cut depth) to Z_move\n"
"(travel height) is done as fast as possible (G0) in one move."
msgstr ""
"Strategia de evacuare a găurii tocmai găurite.\n"
"- când nu este bifat, burghiul va ieși din gaura cu viteza feedrate "
"setată, \n"
"G1, pana ajunge la nivelul zero, ulterior ridicându-se pana la Înălţimea de "
"deplasare\n"
"cu viteza maxima G0\n"
"- când este bifat, burghiul se va deplasa de la adâncimea de tăiere pana la "
"adâncimea\n"
"de deplasare cu viteza maxima G0, intr-o singură mișcare."

#: flatcamGUI/PreferencesUI.py:2178
msgid "Excellon Export"
msgstr "Export Excellon"

#: flatcamGUI/PreferencesUI.py:2183
msgid ""
"The parameters set here are used in the file exported\n"
"when using the File -> Export -> Export Excellon menu entry."
msgstr ""
"Acesti parametri listati aici sunt folositi atunci când\n"
"se exporta un fişier Excellon folosind:\n"
"File -> Exporta -> Exporta Excellon."

#: flatcamGUI/PreferencesUI.py:2194 flatcamGUI/PreferencesUI.py:2200
msgid "The units used in the Excellon file."
msgstr "Unitatile de masura folosite in fişierul Excellon."

#: flatcamGUI/PreferencesUI.py:2208
msgid ""
"The NC drill files, usually named Excellon files\n"
"are files that can be found in different formats.\n"
"Here we set the format used when the provided\n"
"coordinates are not using period."
msgstr ""
"Fişierele NC, numite usual fişiere Excellon\n"
"sunt fişiere care pot fi gasite in diverse formate.\n"
"Aici se setează formatul Excellon când nu se utilizează\n"
"coordonate cu zecimale."

#: flatcamGUI/PreferencesUI.py:2244
msgid "Format"
msgstr "Format"

#: flatcamGUI/PreferencesUI.py:2246 flatcamGUI/PreferencesUI.py:2256
msgid ""
"Select the kind of coordinates format used.\n"
"Coordinates can be saved with decimal point or without.\n"
"When there is no decimal point, it is required to specify\n"
"the number of digits for integer part and the number of decimals.\n"
"Also it will have to be specified if LZ = leading zeros are kept\n"
"or TZ = trailing zeros are kept."
msgstr ""
"Selectati tipul formatului de coordonate folosit.\n"
"Coordonatele se pot salva cu punct zecimal sau fără.\n"
"Când nu se foloseşte punctul zecimal ca separator între\n"
"partea intreaga și partea zecimala, este necesar să se\n"
"specifice numărul de digiti folosit pentru partea intreaga\n"
"și numărul de digiti folosit pentru partea zecimala.\n"
"Trebuie specificat și modul in care sunt tratate zerourile:\n"
"- LZ = zerourile prefix sunt pastrate și cele sufix eliminate\n"
"- TZ = zerourile prefix sunt eliminate și cele sufix pastrate."

#: flatcamGUI/PreferencesUI.py:2253
msgid "Decimal"
msgstr "Zecimale"

#: flatcamGUI/PreferencesUI.py:2254
msgid "No-Decimal"
msgstr "Fără zecimale"

#: flatcamGUI/PreferencesUI.py:2280
msgid ""
"This sets the default type of Excellon zeros.\n"
"If LZ then Leading Zeros are kept and\n"
"Trailing Zeros are removed.\n"
"If TZ is checked then Trailing Zeros are kept\n"
"and Leading Zeros are removed."
msgstr ""
"Acesta este tipul implicit de zero-uri Excellon.\n"
"- LZ = zerourile prefix sunt pastrate și cele sufix eliminate\n"
"- TZ = zerourile prefix sunt eliminate și cele sufix pastrate."

#: flatcamGUI/PreferencesUI.py:2290
msgid "Slot type"
msgstr "Tip slot"

#: flatcamGUI/PreferencesUI.py:2293 flatcamGUI/PreferencesUI.py:2303
msgid ""
"This sets how the slots will be exported.\n"
"If ROUTED then the slots will be routed\n"
"using M15/M16 commands.\n"
"If DRILLED(G85) the slots will be exported\n"
"using the Drilled slot command (G85)."
msgstr ""
"Aceasta stabilește modul în care sloturile vor fi exportate.\n"
"Dacă sunt Decupate, atunci sloturile vor fi procesate\n"
"folosind comenzile M15 / M16.\n"
"Dacă sunt Găurite (G85) sloturile vor fi exportate\n"
"folosind comanda slotului găurit (G85)."

#: flatcamGUI/PreferencesUI.py:2300
msgid "Routed"
msgstr "Decupate"

#: flatcamGUI/PreferencesUI.py:2301
msgid "Drilled(G85)"
msgstr "Găurite(G85)"

#: flatcamGUI/PreferencesUI.py:2333
msgid "A list of Excellon Editor parameters."
msgstr "O listă de parametri ai Editorului Excellon."

#: flatcamGUI/PreferencesUI.py:2343
msgid ""
"Set the number of selected Excellon geometry\n"
"items above which the utility geometry\n"
"becomes just a selection rectangle.\n"
"Increases the performance when moving a\n"
"large number of geometric elements."
msgstr ""
"Setează numărul de geometrii Excellon selectate peste care\n"
"geometria utilitară devine o simplă formă pătratica de \n"
"selectie.\n"
"Creste performanta cand se muta un număr mai mare de \n"
"elemente geometrice."

#: flatcamGUI/PreferencesUI.py:2355
msgid "New Tool Dia"
msgstr "Dia. nou unealtă"

#: flatcamGUI/PreferencesUI.py:2378
msgid "Linear Drill Array"
msgstr "Arie lineară de găuri"

#: flatcamGUI/PreferencesUI.py:2418
msgid "Circular Drill Array"
msgstr "Arie circ. de găuri"

#: flatcamGUI/PreferencesUI.py:2497
msgid "Linear Slot Array"
msgstr "Arie lineară de Sloturi"

#: flatcamGUI/PreferencesUI.py:2549
msgid "Circular Slot Array"
msgstr "Arie circ. de Sloturi"

#: flatcamGUI/PreferencesUI.py:2583
msgid "Geometry General"
msgstr "Geometrie General"

#: flatcamGUI/PreferencesUI.py:2602
msgid ""
"The number of circle steps for <b>Geometry</b> \n"
"circle and arc shapes linear approximation."
msgstr ""
"Numărul de segmente utilizate pentru\n"
"aproximarea lineara a <b>Geometriilor</b> circulare."

#: flatcamGUI/PreferencesUI.py:2630
msgid "Geometry Options"
msgstr "Opțiuni Geometrie"

#: flatcamGUI/PreferencesUI.py:2637
msgid ""
"Create a CNC Job object\n"
"tracing the contours of this\n"
"Geometry object."
msgstr ""
"Crează un obiect CNCJob care urmăreste conturul\n"
"acestui obiect tip Geometrie."

#: flatcamGUI/PreferencesUI.py:2669
msgid "Depth/Pass"
msgstr "Adânc./Trecere"

#: flatcamGUI/PreferencesUI.py:2671
msgid ""
"The depth to cut on each pass,\n"
"when multidepth is enabled.\n"
"It has positive value although\n"
"it is a fraction from the depth\n"
"which has negative value."
msgstr ""
"Adâncimea la care se taie la fiecare trecere,\n"
"atunci când >MultiPas< este folosit.\n"
"Valoarea este pozitivă desi reprezinta o fracţie\n"
"a adancimii de tăiere care este o valoare negativă."

#: flatcamGUI/PreferencesUI.py:2798
msgid "Geometry Adv. Options"
msgstr "Opțiuni Avans. Geometrie"

#: flatcamGUI/PreferencesUI.py:2805
msgid ""
"A list of Geometry advanced parameters.\n"
"Those parameters are available only for\n"
"Advanced App. Level."
msgstr ""
"O lista de parametri Geometrie avansati.\n"
"Acesti parametri sunt disponibili doar\n"
"când este selectat Nivelul Avansat pentru\n"
"aplicaţie in Preferințe - > General."

#: flatcamGUI/PreferencesUI.py:2815 flatcamGUI/PreferencesUI.py:4349
#: flatcamTools/ToolSolderPaste.py:207
msgid "Toolchange X-Y"
msgstr "X,Y schimb. unealtă"

#: flatcamGUI/PreferencesUI.py:2826
msgid ""
"Height of the tool just after starting the work.\n"
"Delete the value if you don't need this feature."
msgstr ""
"Înălţimea uneltei la care se gaseste la inceputul lucrului.\n"
"Lasa câmpul gol daca nu folosești aceasta."

#: flatcamGUI/PreferencesUI.py:2902
msgid "Seg. X size"
msgstr "Dim. seg X"

#: flatcamGUI/PreferencesUI.py:2904
msgid ""
"The size of the trace segment on the X axis.\n"
"Useful for auto-leveling.\n"
"A value of 0 means no segmentation on the X axis."
msgstr ""
"Dimensiunea segmentului de traseu pe axa X.\n"
"Folositor pentru auto-nivelare.\n"
"O valoare de 0 inseamnaca nu se face segmentare\n"
"pe axa X."

#: flatcamGUI/PreferencesUI.py:2913
msgid "Seg. Y size"
msgstr "Dim. seg Y"

#: flatcamGUI/PreferencesUI.py:2915
msgid ""
"The size of the trace segment on the Y axis.\n"
"Useful for auto-leveling.\n"
"A value of 0 means no segmentation on the Y axis."
msgstr ""
"Dimensiunea segmentului de traseu pe axa Y.\n"
"Folositor pentru auto-nivelare.\n"
"O valoare de 0 inseamnaca nu se face segmentare\n"
"pe axa Y."

#: flatcamGUI/PreferencesUI.py:2931
msgid "Geometry Editor"
msgstr "Editor Geometrii"

#: flatcamGUI/PreferencesUI.py:2936
msgid "A list of Geometry Editor parameters."
msgstr "O lista de parametri ai Editorului de Geometrii."

#: flatcamGUI/PreferencesUI.py:2946
msgid ""
"Set the number of selected geometry\n"
"items above which the utility geometry\n"
"becomes just a selection rectangle.\n"
"Increases the performance when moving a\n"
"large number of geometric elements."
msgstr ""
"Setează numărul de geometriil selectate peste care\n"
"geometria utilitară devine o simplă formă pătratica de \n"
"selectie.\n"
"Creste performanta cand se muta un număr mai mare de \n"
"elemente geometrice."

#: flatcamGUI/PreferencesUI.py:2977
msgid "CNC Job General"
msgstr "CNCJob General"

#: flatcamGUI/PreferencesUI.py:3032
msgid ""
"The number of circle steps for <b>GCode</b> \n"
"circle and arc shapes linear approximation."
msgstr ""
"Numărul de segmente utilizate pentru\n"
"aproximarea lineara a reprezentarilor <b>GCodului</b> circular."

#: flatcamGUI/PreferencesUI.py:3040
msgid "Travel dia"
msgstr "Dia Deplasare"

#: flatcamGUI/PreferencesUI.py:3042
msgid ""
"The width of the travel lines to be\n"
"rendered in the plot."
msgstr "Diametrul liniilor de deplasare care să fie redate prin afișare."

#: flatcamGUI/PreferencesUI.py:3053
msgid "Coordinates decimals"
msgstr "Coord. zecimale"

#: flatcamGUI/PreferencesUI.py:3055
msgid ""
"The number of decimals to be used for \n"
"the X, Y, Z coordinates in CNC code (GCODE, etc.)"
msgstr ""
"Numărul de zecimale care să fie folosit in \n"
"coordonatele X,Y,Z in codul CNC (GCode etc)."

#: flatcamGUI/PreferencesUI.py:3063
msgid "Feedrate decimals"
msgstr "Feedrate zecimale"

#: flatcamGUI/PreferencesUI.py:3065
msgid ""
"The number of decimals to be used for \n"
"the Feedrate parameter in CNC code (GCODE, etc.)"
msgstr ""
"Numărul de zecimale care să fie folosit in \n"
"parametrul >Feedrate< in codul CNC (GCode etc)."

#: flatcamGUI/PreferencesUI.py:3073
msgid "Coordinates type"
msgstr "Tip coordinate"

#: flatcamGUI/PreferencesUI.py:3075
msgid ""
"The type of coordinates to be used in Gcode.\n"
"Can be:\n"
"- Absolute G90 -> the reference is the origin x=0, y=0\n"
"- Incremental G91 -> the reference is the previous position"
msgstr ""
"Tipul de coordinate care să fie folosite in G-Code.\n"
"Poate fi:\n"
"- Absolut G90 -> referinta este originea x=0, y=0\n"
"- Incrementator G91 -> referinta este pozitia anterioară"

#: flatcamGUI/PreferencesUI.py:3081
msgid "Absolute G90"
msgstr "Absolut G90"

#: flatcamGUI/PreferencesUI.py:3082
msgid "Incremental G91"
msgstr "Incrementator G91"

#: flatcamGUI/PreferencesUI.py:3099
msgid "CNC Job Options"
msgstr "Opțiuni CNCJob"

#: flatcamGUI/PreferencesUI.py:3102
msgid "Export G-Code"
msgstr "Exportă G-Code"

#: flatcamGUI/PreferencesUI.py:3118
msgid "Prepend to G-Code"
msgstr "Adaugă la inceputul G-Code"

#: flatcamGUI/PreferencesUI.py:3130
msgid "Append to G-Code"
msgstr "Adaugă la sfârşitul G-Code"

#: flatcamGUI/PreferencesUI.py:3150
msgid "CNC Job Adv. Options"
msgstr "Opțiuni Avans. CNCJob"

#: flatcamGUI/PreferencesUI.py:3217
msgid "tool number"
msgstr "numărul uneltei"

#: flatcamGUI/PreferencesUI.py:3218
msgid "tool diameter"
msgstr "diametrul sculei"

#: flatcamGUI/PreferencesUI.py:3219
msgid "for Excellon, total number of drills"
msgstr "pentru Excellon, numărul total de operațiuni găurire"

#: flatcamGUI/PreferencesUI.py:3221
msgid "X coord for Toolchange"
msgstr "coordonata X pentru schimbarea uneltei"

#: flatcamGUI/PreferencesUI.py:3224
msgid "Z coord for Toolchange"
msgstr "coordonata Z pentru schimbarea uneltei"

#: flatcamGUI/PreferencesUI.py:3225
msgid "Z depth for the cut"
msgstr "Z adâncimea de tăiere"

#: flatcamGUI/PreferencesUI.py:3226
msgid "Z height for travel"
msgstr "Z Înălţimea deplasare"

#: flatcamGUI/PreferencesUI.py:3227
msgid "the step value for multidepth cut"
msgstr "pasul pentru taierea progresiva"

#: flatcamGUI/PreferencesUI.py:3229
msgid "the value for the spindle speed"
msgstr "valoarea viteza motor"

#: flatcamGUI/PreferencesUI.py:3251
msgid "Annotation Size"
msgstr "Dim. anotate"

#: flatcamGUI/PreferencesUI.py:3253
msgid "The font size of the annotation text. In pixels."
msgstr "Dimensiunea fontului pt. textul cu notatii. In pixeli."

#: flatcamGUI/PreferencesUI.py:3261
msgid "Annotation Color"
msgstr "Culoarea anotatii"

#: flatcamGUI/PreferencesUI.py:3263
msgid "Set the font color for the annotation texts."
msgstr "Setează culoarea pentru textul cu anotatii."

#: flatcamGUI/PreferencesUI.py:3289
msgid "NCC Tool Options"
msgstr "Opțiuni Unealta NCC"

#: flatcamGUI/PreferencesUI.py:3302 flatcamGUI/PreferencesUI.py:4284
msgid "Tools dia"
msgstr "Dia unealtă"

#: flatcamGUI/PreferencesUI.py:3311 flatcamTools/ToolNonCopperClear.py:195
msgid "Tool Type"
msgstr "Tip Unealtă"

#: flatcamGUI/PreferencesUI.py:3313 flatcamGUI/PreferencesUI.py:3321
#: flatcamTools/ToolNonCopperClear.py:197
#: flatcamTools/ToolNonCopperClear.py:205
msgid ""
"Default tool type:\n"
"- 'V-shape'\n"
"- Circular"
msgstr ""
"Tipul de unealtă default:\n"
"- 'Forma-V'\n"
"- Circular"

#: flatcamGUI/PreferencesUI.py:3318 flatcamTools/ToolNonCopperClear.py:202
msgid "V-shape"
msgstr "Forma-V"

#: flatcamGUI/PreferencesUI.py:3351 flatcamGUI/PreferencesUI.py:3359
#: flatcamTools/ToolNonCopperClear.py:149
#: flatcamTools/ToolNonCopperClear.py:157
msgid ""
"Milling type when the selected tool is of type: 'iso_op':\n"
"- climb / best for precision milling and to reduce tool usage\n"
"- conventional / useful when there is no backlash compensation"
msgstr ""
"Tipul de frezare cand unealta selectată este de tipul: 'iso_op':\n"
"- urcare -> potrivit pentru frezare de precizie și pt a reduce uzura "
"uneltei\n"
"- conventional -> pentru cazul când nu exista o compensare a 'backlash-ului'"

#: flatcamGUI/PreferencesUI.py:3368 flatcamGUI/PreferencesUI.py:3732
#: flatcamTools/ToolNonCopperClear.py:163 flatcamTools/ToolPaint.py:136
msgid "Tool order"
msgstr "Ordine unelte"

#: flatcamGUI/PreferencesUI.py:3369 flatcamGUI/PreferencesUI.py:3379
#: flatcamGUI/PreferencesUI.py:3733 flatcamGUI/PreferencesUI.py:3743
#: flatcamTools/ToolNonCopperClear.py:164
#: flatcamTools/ToolNonCopperClear.py:174 flatcamTools/ToolPaint.py:137
#: flatcamTools/ToolPaint.py:147
msgid ""
"This set the way that the tools in the tools table are used.\n"
"'No' --> means that the used order is the one in the tool table\n"
"'Forward' --> means that the tools will be ordered from small to big\n"
"'Reverse' --> menas that the tools will ordered from big to small\n"
"\n"
"WARNING: using rest machining will automatically set the order\n"
"in reverse and disable this control."
msgstr ""
"Aceasta stabilește modul în care sunt utilizate uneltele din tabelul de "
"unelte.\n"
"„Nu” -> înseamnă că ordinea utilizată este cea din tabelul de unelte\n"
"„Înainte” -> înseamnă că uneltele vor fi ordonate de la mic la mare\n"
"'Înapoi' -> înseamnă pe care uneltele vor fi ordonate de la mari la mici\n"
"\n"
"AVERTIZARE: folosirea prelucrării 'resturi' va seta automat ordonarea\n"
"în sens invers și va dezactiva acest control."

#: flatcamGUI/PreferencesUI.py:3377 flatcamGUI/PreferencesUI.py:3741
#: flatcamTools/ToolNonCopperClear.py:172 flatcamTools/ToolPaint.py:145
msgid "Forward"
msgstr "Înainte"

#: flatcamGUI/PreferencesUI.py:3378 flatcamGUI/PreferencesUI.py:3742
#: flatcamTools/ToolNonCopperClear.py:173 flatcamTools/ToolPaint.py:146
msgid "Reverse"
msgstr "Înapoi"

#: flatcamGUI/PreferencesUI.py:3391 flatcamGUI/PreferencesUI.py:3396
#: flatcamTools/ToolNonCopperClear.py:271
#: flatcamTools/ToolNonCopperClear.py:276
msgid ""
"Depth of cut into material. Negative value.\n"
"In FlatCAM units."
msgstr ""
"Adancimea de tăiere in material. Valoare negative.\n"
"In unitătile FlatCAM."

#: flatcamGUI/PreferencesUI.py:3406 flatcamTools/ToolNonCopperClear.py:285
#, python-format
msgid ""
"How much (fraction) of the tool width to overlap each tool pass.\n"
"Example:\n"
"A value here of 0.25 means 25%% from the tool diameter found above.\n"
"\n"
"Adjust the value starting with lower values\n"
"and increasing it if areas that should be cleared are still \n"
"not cleared.\n"
"Lower values = faster processing, faster execution on PCB.\n"
"Higher values = slow processing and slow execution on CNC\n"
"due of too many paths."
msgstr ""
"Cat de mult (fracţie) din diametrul uneltei să se suprapună la fiecare "
"trecere a uneltei.\n"
"Exemplu:\n"
"O valoare aici de 0.25 inseamna 25%% din diametrul uneltei de mai sus..\n"
"\n"
"Ajustează valoarea incepand de la valori mici\n"
"și pe urma creste daca ariile care ar trebui >curățate< inca\n"
"nu sunt procesate.\n"
"Valori scazute = procesare rapida,execuţie rapida a PCB-ului.\n"
"Valori mari= procesare lenta cat și o execuţie la fel de lenta a PCB-ului,\n"
"datorita numărului mai mare de treceri-tăiere."

#: flatcamGUI/PreferencesUI.py:3427 flatcamTools/ToolNonCopperClear.py:305
msgid "Bounding box margin."
msgstr "Marginea pentru forma înconjurătoare."

#: flatcamGUI/PreferencesUI.py:3436 flatcamGUI/PreferencesUI.py:3787
#: flatcamTools/ToolNonCopperClear.py:314
msgid ""
"Algorithm for non-copper clearing:<BR><B>Standard</B>: Fixed step inwards."
"<BR><B>Seed-based</B>: Outwards from seed.<BR><B>Line-based</B>: Parallel "
"lines."
msgstr ""
"Algoritm pt curățare de cupru:<BR><B>Standard</B>: Pas fix spre interior."
"<BR><B>Punct-samanta</B>: De la punctul samanta, spre expterior.<BR><B>Linii "
"drepte</B>: Linii paralele."

#: flatcamGUI/PreferencesUI.py:3450 flatcamGUI/PreferencesUI.py:3801
#: flatcamTools/ToolNonCopperClear.py:328 flatcamTools/ToolPaint.py:253
msgid "Connect"
msgstr "Conectează"

#: flatcamGUI/PreferencesUI.py:3460 flatcamGUI/PreferencesUI.py:3811
#: flatcamTools/ToolNonCopperClear.py:337 flatcamTools/ToolPaint.py:262
msgid "Contour"
msgstr "Contur"

#: flatcamGUI/PreferencesUI.py:3470 flatcamTools/ToolNonCopperClear.py:346
#: flatcamTools/ToolPaint.py:271
msgid "Rest M."
msgstr "Rest M."

#: flatcamGUI/PreferencesUI.py:3472 flatcamTools/ToolNonCopperClear.py:348
msgid ""
"If checked, use 'rest machining'.\n"
"Basically it will clear copper outside PCB features,\n"
"using the biggest tool and continue with the next tools,\n"
"from bigger to smaller, to clear areas of copper that\n"
"could not be cleared by previous tool, until there is\n"
"no more copper to clear or there are no more tools.\n"
"If not checked, use the standard algorithm."
msgstr ""
"Daca este bifat foloseşte strategia de curățare tip 'rest'.\n"
"Curățarea de cupru va incepe cu unealta cu diametrul cel mai mare\n"
"continuand ulterior cu cele cu dia mai mic pana numai sunt unelte\n"
"sau s-a terminat procesul.\n"
"Doar uneltele care efectiv au creat geometrie vor fi prezente in obiectul\n"
"final. Aceasta deaorece unele unelte nu vor putea genera geometrie.\n"
"Daca nu este bifat, foloseşte algoritmul standard."

#: flatcamGUI/PreferencesUI.py:3487 flatcamGUI/PreferencesUI.py:3499
#: flatcamTools/ToolNonCopperClear.py:363
#: flatcamTools/ToolNonCopperClear.py:375
msgid ""
"If used, it will add an offset to the copper features.\n"
"The copper clearing will finish to a distance\n"
"from the copper features.\n"
"The value can be between 0 and 10 FlatCAM units."
msgstr ""
"Dacă este folosit, va adăuga un offset la traseele de cupru.\n"
"Curătarea de cupru se va termina la o anume distanță\n"
"de traseele de cupru.\n"
"Valoarea poate fi cuprinsă între 0 și 10 unități FlatCAM."

#: flatcamGUI/PreferencesUI.py:3497 flatcamTools/ToolNonCopperClear.py:373
msgid "Offset value"
msgstr "Valoare Ofset"

#: flatcamGUI/PreferencesUI.py:3514 flatcamTools/ToolNonCopperClear.py:399
msgid "Itself"
msgstr "Însuşi"

#: flatcamGUI/PreferencesUI.py:3515 flatcamGUI/PreferencesUI.py:3832
msgid "Area"
msgstr "Aria"

#: flatcamGUI/PreferencesUI.py:3516
msgid "Ref"
msgstr "Ref"

#: flatcamGUI/PreferencesUI.py:3517
msgid "Reference"
msgstr "Referinţă"

#: flatcamGUI/PreferencesUI.py:3519 flatcamTools/ToolNonCopperClear.py:405
msgid ""
"- 'Itself' -  the non copper clearing extent\n"
"is based on the object that is copper cleared.\n"
" - 'Area Selection' - left mouse click to start selection of the area to be "
"painted.\n"
"Keeping a modifier key pressed (CTRL or SHIFT) will allow to add multiple "
"areas.\n"
"- 'Reference Object' -  will do non copper clearing within the area\n"
"specified by another object."
msgstr ""
"- „Însuși” - suprafața de curățare a cuprului\n"
"se bazează pe obiectul care este curățat de cupru.\n"
"  - „Selecție zonă” - faceți clic stânga cu mouse-ul pentru a începe "
"selecția zonei care va fi pictată.\n"
"Menținerea unei taste de modificare apăsată (CTRL sau SHIFT) va permite "
"adăugarea mai multor zone.\n"
"- „Obiect de referință” - va face o curățare fără cupru în zona\n"
"specificată de un alt obiect."

#: flatcamGUI/PreferencesUI.py:3530 flatcamGUI/PreferencesUI.py:3840
msgid "Normal"
msgstr "Normal"

#: flatcamGUI/PreferencesUI.py:3531 flatcamGUI/PreferencesUI.py:3841
msgid "Progressive"
msgstr "Progresiv"

#: flatcamGUI/PreferencesUI.py:3532
msgid "NCC Plotting"
msgstr "Afisare NCC"

#: flatcamGUI/PreferencesUI.py:3534
msgid ""
"- 'Normal' -  normal plotting, done at the end of the NCC job\n"
"- 'Progressive' - after each shape is generated it will be plotted."
msgstr ""
"- 'Normal' - afisare normală, efectuată la sfarsitul activitătii NCC\n"
"- 'Progresiv' - forma se afisează imediat ce a fost generată."

#: flatcamGUI/PreferencesUI.py:3548
msgid "Cutout Tool Options"
msgstr "Opțiuni Unealta Decupare"

#: flatcamGUI/PreferencesUI.py:3564 flatcamTools/ToolCutOut.py:93
msgid ""
"Diameter of the tool used to cutout\n"
"the PCB shape out of the surrounding material."
msgstr ""
"Diametrul uneltei folosita pt decuparea\n"
"PCB-ului din materialului inconjurator."

#: flatcamGUI/PreferencesUI.py:3572 flatcamTools/ToolCutOut.py:76
msgid "Obj kind"
msgstr "Tipul de obiect"

#: flatcamGUI/PreferencesUI.py:3574 flatcamTools/ToolCutOut.py:78
msgid ""
"Choice of what kind the object we want to cutout is.<BR>- <B>Single</B>: "
"contain a single PCB Gerber outline object.<BR>- <B>Panel</B>: a panel PCB "
"Gerber object, which is made\n"
"out of many individual PCB outlines."
msgstr ""
"Genul de obiect pe care vrem să il decupăm..<BR>- <B>Unic</B>: contine un "
"singur contur PCB in obiectul Gerber .<BR>- <B>Panel</B>: un obiect Gerber "
"tip panel, care este făcut\n"
"din mai multe contururi PCB."

#: flatcamGUI/PreferencesUI.py:3581 flatcamGUI/PreferencesUI.py:3831
#: flatcamTools/ToolCutOut.py:84
msgid "Single"
msgstr "Unic"

#: flatcamGUI/PreferencesUI.py:3582 flatcamTools/ToolCutOut.py:85
msgid "Panel"
msgstr "Panel"

#: flatcamGUI/PreferencesUI.py:3588 flatcamTools/ToolCutOut.py:102
msgid ""
"Margin over bounds. A positive value here\n"
"will make the cutout of the PCB further from\n"
"the actual PCB border"
msgstr ""
"Marginea (zona de siguranţă). O val. pozitivă\n"
"va face decuparea distanțat cu aceasta valoare \n"
"fata de PCB-ul efectiv"

#: flatcamGUI/PreferencesUI.py:3596
msgid "Gap size"
msgstr "Dim. punte"

#: flatcamGUI/PreferencesUI.py:3598 flatcamTools/ToolCutOut.py:112
msgid ""
"The size of the bridge gaps in the cutout\n"
"used to keep the board connected to\n"
"the surrounding material (the one \n"
"from which the PCB is cutout)."
msgstr ""
"Dimenisunea punţilor in decupaj care servesc\n"
"in a mentine ataşat PCB-ul la materialul de unde \n"
"este decupat."

#: flatcamGUI/PreferencesUI.py:3607 flatcamTools/ToolCutOut.py:148
msgid "Gaps"
msgstr "Punţi"

#: flatcamGUI/PreferencesUI.py:3609
msgid ""
"Number of gaps used for the cutout.\n"
"There can be maximum 8 bridges/gaps.\n"
"The choices are:\n"
"- None  - no gaps\n"
"- lr    - left + right\n"
"- tb    - top + bottom\n"
"- 4     - left + right +top + bottom\n"
"- 2lr   - 2*left + 2*right\n"
"- 2tb  - 2*top + 2*bottom\n"
"- 8     - 2*left + 2*right +2*top + 2*bottom"
msgstr ""
"Numărul de punţi folosite in decupare.\n"
"Pot fi un număr maxim de 8 punţi aranjate in felul\n"
"următor:\n"
"- Nici unul - nu există spatii\n"
"- lr = stânga -dreapta\n"
"- tb = sus - jos\n"
"- 4 = stânga -dreapta - sus - jos\n"
"- 2lr = 2* stânga - 2* dreapta\n"
"- 2tb = 2* sus - 2* jos\n"
"- 8 = 2* stânga - 2* dreapta - 2* sus - 2* jos"

#: flatcamGUI/PreferencesUI.py:3631 flatcamTools/ToolCutOut.py:129
msgid "Convex Sh."
msgstr "Formă Conv"

#: flatcamGUI/PreferencesUI.py:3633 flatcamTools/ToolCutOut.py:131
msgid ""
"Create a convex shape surrounding the entire PCB.\n"
"Used only if the source object type is Gerber."
msgstr ""
"Generează un obiect tip Geometrie care va inconjura\n"
"tot PCB-ul. Forma sa este convexa.\n"
"Se foloseste doar daca obiectul sursă este de tip Gerber."

#: flatcamGUI/PreferencesUI.py:3647
msgid "2Sided Tool Options"
msgstr "Opțiuni Unealta 2Fețe"

#: flatcamGUI/PreferencesUI.py:3652
msgid ""
"A tool to help in creating a double sided\n"
"PCB using alignment holes."
msgstr ""
"O unealtă care ajuta in crearea de PCB-uri cu 2 fețe\n"
"folosind găuri de aliniere."

#: flatcamGUI/PreferencesUI.py:3662 flatcamTools/ToolDblSided.py:234
msgid "Drill dia"
msgstr "Dia gaură"

#: flatcamGUI/PreferencesUI.py:3664 flatcamTools/ToolDblSided.py:225
#: flatcamTools/ToolDblSided.py:236
msgid "Diameter of the drill for the alignment holes."
msgstr "Diametrul găurii pentru găurile de aliniere."

#: flatcamGUI/PreferencesUI.py:3673 flatcamTools/ToolDblSided.py:120
msgid "Mirror Axis:"
msgstr "Axe oglindire:"

#: flatcamGUI/PreferencesUI.py:3675 flatcamTools/ToolDblSided.py:122
msgid "Mirror vertically (X) or horizontally (Y)."
msgstr "Oglindește vertical (X) sau orizontal (Y)."

#: flatcamGUI/PreferencesUI.py:3684 flatcamTools/ToolDblSided.py:131
msgid "Point"
msgstr "Punct"

#: flatcamGUI/PreferencesUI.py:3685 flatcamTools/ToolDblSided.py:132
msgid "Box"
msgstr "Forma"

#: flatcamGUI/PreferencesUI.py:3686
msgid "Axis Ref"
msgstr "Axa de ref."

#: flatcamGUI/PreferencesUI.py:3688 flatcamTools/ToolDblSided.py:135
msgid ""
"The axis should pass through a <b>point</b> or cut\n"
" a specified <b>box</b> (in a FlatCAM object) through \n"
"the center."
msgstr ""
"Axa de referinţă ar trebui să treacă printr-un <b>punct</b> ori să strabata\n"
" o <b>forma</b> (obiect FlatCAM) prin mijloc."

#: flatcamGUI/PreferencesUI.py:3704
msgid "Paint Tool Options"
msgstr "Opțiuni Unealta Paint"

#: flatcamGUI/PreferencesUI.py:3709
msgid "<b>Parameters:</b>"
msgstr "<b>Parametri:</b>"

#: flatcamGUI/PreferencesUI.py:3821 flatcamTools/ToolPaint.py:286
msgid "Selection"
msgstr "Selecţie"

#: flatcamGUI/PreferencesUI.py:3823 flatcamTools/ToolPaint.py:288
#: flatcamTools/ToolPaint.py:304
msgid ""
"How to select Polygons to be painted.\n"
"\n"
"- 'Area Selection' - left mouse click to start selection of the area to be "
"painted.\n"
"Keeping a modifier key pressed (CTRL or SHIFT) will allow to add multiple "
"areas.\n"
"- 'All Polygons' - the Paint will start after click.\n"
"- 'Reference Object' -  will do non copper clearing within the area\n"
"specified by another object."
msgstr ""
"Cum se selectează Poligoanele care vor fi pictate.\n"
"\n"
"- „Selecție zonă” - faceți clic stânga cu mouse-ul pentru a începe selecția "
"zonei care va fi pictată.\n"
"Menținerea unei taste de modificare apăsată (CTRL sau SHIFT) va permite "
"adăugarea mai multor zone.\n"
"- „Toate Poligoanele” - Pictarea va începe după clic.\n"
"- „Obiect de referință” - va face o curățare fără cupru în zona\n"
"specificată de un alt obiect."

#: flatcamGUI/PreferencesUI.py:3834
msgid "Ref."
msgstr "Ref."

#: flatcamGUI/PreferencesUI.py:3842
msgid "Paint Plotting"
msgstr "Afisare Paint"

#: flatcamGUI/PreferencesUI.py:3844
msgid ""
"- 'Normal' -  normal plotting, done at the end of the Paint job\n"
"- 'Progressive' - after each shape is generated it will be plotted."
msgstr ""
"- 'Normal' - afisare normală, efectuată la sfarsitul activitătii Paint\n"
"- 'Progresiv' - forma se afisează imediat ce a fost generată."

#: flatcamGUI/PreferencesUI.py:3858
msgid "Film Tool Options"
msgstr "Opțiuni Unealta Film"

#: flatcamGUI/PreferencesUI.py:3863
msgid ""
"Create a PCB film from a Gerber or Geometry\n"
"FlatCAM object.\n"
"The file is saved in SVG format."
msgstr ""
"Crează un film PCB dintr-un obiect Gerber sau tip Geometrie.\n"
"Fişierul este salvat in format SVG."

#: flatcamGUI/PreferencesUI.py:3874
msgid "Film Type"
msgstr "Tip film"

#: flatcamGUI/PreferencesUI.py:3876 flatcamTools/ToolFilm.py:118
msgid ""
"Generate a Positive black film or a Negative film.\n"
"Positive means that it will print the features\n"
"with black on a white canvas.\n"
"Negative means that it will print the features\n"
"with white on a black canvas.\n"
"The Film format is SVG."
msgstr ""
"Generează un film negru Pozitiv sau un film Negativ.\n"
"Pozitiv = traseele vor fi negre pe un fundal alb.\n"
"Negativ = traseele vor fi albe pe un fundal negru.\n"
"Formatul fişierului pt filmul salvat este SVG."

#: flatcamGUI/PreferencesUI.py:3887
msgid "Film Color"
msgstr "Film Color"

#: flatcamGUI/PreferencesUI.py:3889
msgid "Set the film color when positive film is selected."
msgstr "Setați culoarea filmului atunci când este selectat filmul pozitiv."

#: flatcamGUI/PreferencesUI.py:3907 flatcamTools/ToolFilm.py:130
msgid "Border"
msgstr "Bordură"

#: flatcamGUI/PreferencesUI.py:3909 flatcamTools/ToolFilm.py:132
msgid ""
"Specify a border around the object.\n"
"Only for negative film.\n"
"It helps if we use as a Box Object the same \n"
"object as in Film Object. It will create a thick\n"
"black bar around the actual print allowing for a\n"
"better delimitation of the outline features which are of\n"
"white color like the rest and which may confound with the\n"
"surroundings if not for this border."
msgstr ""
"Specifică o bordură de jur imprejurul obiectului.\n"
"Doar pt filmele negative.\n"
"Ajută dacă folosim in Obiect Forma aceluiasi obiect ca in Obiect Film.\n"
"Va crea o bara solidă neagră in jurul printului efectiv permitand o\n"
"delimitare exactă."

#: flatcamGUI/PreferencesUI.py:3922 flatcamTools/ToolFilm.py:144
msgid "Scale Stroke"
msgstr "Scalează"

#: flatcamGUI/PreferencesUI.py:3924 flatcamTools/ToolFilm.py:146
msgid ""
"Scale the line stroke thickness of each feature in the SVG file.\n"
"It means that the line that envelope each SVG feature will be thicker or "
"thinner,\n"
"therefore the fine features may be more affected by this parameter."
msgstr ""
"Scalează grosimea conturului fiecarui element din fişierul SVG.\n"
"Elementele mai mici vor fi afectate mai mult."

#: flatcamGUI/PreferencesUI.py:3939
msgid "Panelize Tool Options"
msgstr "Opțiuni Unealta Panelizare"

#: flatcamGUI/PreferencesUI.py:3944
msgid ""
"Create an object that contains an array of (x, y) elements,\n"
"each element is a copy of the source object spaced\n"
"at a X distance, Y distance of each other."
msgstr ""
"Crează un obiect care contine o arie de (linii, coloane) elemente,\n"
"unde fiecare element este o copie a obiectului sursa, separat la o\n"
"distanţă X, Y unul de celalalt."

#: flatcamGUI/PreferencesUI.py:3955 flatcamTools/ToolPanelize.py:147
msgid "Spacing cols"
msgstr "Sep. coloane"

#: flatcamGUI/PreferencesUI.py:3957 flatcamTools/ToolPanelize.py:149
msgid ""
"Spacing between columns of the desired panel.\n"
"In current units."
msgstr ""
"Spatiul de separare între coloane.\n"
"In unitatile curente."

#: flatcamGUI/PreferencesUI.py:3965 flatcamTools/ToolPanelize.py:156
msgid "Spacing rows"
msgstr "Sep. linii"

#: flatcamGUI/PreferencesUI.py:3967 flatcamTools/ToolPanelize.py:158
msgid ""
"Spacing between rows of the desired panel.\n"
"In current units."
msgstr ""
"Spatiul de separare între linii.\n"
"In unitatile curente."

#: flatcamGUI/PreferencesUI.py:3975 flatcamTools/ToolPanelize.py:165
msgid "Columns"
msgstr "Coloane"

#: flatcamGUI/PreferencesUI.py:3977 flatcamTools/ToolPanelize.py:167
msgid "Number of columns of the desired panel"
msgstr "Numărul de coloane ale panel-ului dorit"

#: flatcamGUI/PreferencesUI.py:3984 flatcamTools/ToolPanelize.py:173
msgid "Rows"
msgstr "Linii"

#: flatcamGUI/PreferencesUI.py:3986 flatcamTools/ToolPanelize.py:175
msgid "Number of rows of the desired panel"
msgstr "Numărul de linii ale panel-ului dorit"

#: flatcamGUI/PreferencesUI.py:3992 flatcamTools/ToolPanelize.py:181
msgid "Gerber"
msgstr "Gerber"

#: flatcamGUI/PreferencesUI.py:3993 flatcamTools/ToolPanelize.py:182
msgid "Geo"
msgstr "Geo"

#: flatcamGUI/PreferencesUI.py:3994 flatcamTools/ToolPanelize.py:183
msgid "Panel Type"
msgstr "Tip panel"

#: flatcamGUI/PreferencesUI.py:3996
msgid ""
"Choose the type of object for the panel object:\n"
"- Gerber\n"
"- Geometry"
msgstr ""
"Alege tipul obiectului panel:\n"
"- Gerber\n"
"- Geometrie"

#: flatcamGUI/PreferencesUI.py:4005
msgid "Constrain within"
msgstr "Constrange"

#: flatcamGUI/PreferencesUI.py:4007 flatcamTools/ToolPanelize.py:195
msgid ""
"Area define by DX and DY within to constrain the panel.\n"
"DX and DY values are in current units.\n"
"Regardless of how many columns and rows are desired,\n"
"the final panel will have as many columns and rows as\n"
"they fit completely within selected area."
msgstr ""
"Arie definita de Dx și Dy in care se constrange panel-ul.\n"
"Dx și Dy sunt valori in unitati curente.\n"
"Indiferent de cat de multe coloane și/sau linii sunt selectate mai sus\n"
"panelul final va contine numai acel număr de linii/coloane care se inscrie\n"
"complet in aria desemnata."

#: flatcamGUI/PreferencesUI.py:4016 flatcamTools/ToolPanelize.py:204
msgid "Width (DX)"
msgstr "Lătime (Dx)"

#: flatcamGUI/PreferencesUI.py:4018 flatcamTools/ToolPanelize.py:206
msgid ""
"The width (DX) within which the panel must fit.\n"
"In current units."
msgstr ""
"Lăţimea (Dx) in care panelul trebuie să se inscrie.\n"
"In unitati curente."

#: flatcamGUI/PreferencesUI.py:4025 flatcamTools/ToolPanelize.py:212
msgid "Height (DY)"
msgstr "Inăltime (Dy)"

#: flatcamGUI/PreferencesUI.py:4027 flatcamTools/ToolPanelize.py:214
msgid ""
"The height (DY)within which the panel must fit.\n"
"In current units."
msgstr ""
"Înălţimea (Dy) in care panelul trebuie să se inscrie.\n"
"In unitati curente."

#: flatcamGUI/PreferencesUI.py:4041
msgid "Calculators Tool Options"
msgstr "Opțiuni Unealta Calculatoare"

#: flatcamGUI/PreferencesUI.py:4044 flatcamTools/ToolCalculators.py:25
msgid "V-Shape Tool Calculator"
msgstr "Calculator Unealta V-Shape"

#: flatcamGUI/PreferencesUI.py:4046
msgid ""
"Calculate the tool diameter for a given V-shape tool,\n"
"having the tip diameter, tip angle and\n"
"depth-of-cut as parameters."
msgstr ""
"Calculează diametrul pentru o unealtă V-Shape data,\n"
"avand diametrul vârfului și unghiul la vârf cat și\n"
"adâncimea de tăiere, ca parametri."

#: flatcamGUI/PreferencesUI.py:4057 flatcamTools/ToolCalculators.py:92
msgid "Tip Diameter"
msgstr "Dia vârf"

#: flatcamGUI/PreferencesUI.py:4059 flatcamTools/ToolCalculators.py:97
msgid ""
"This is the tool tip diameter.\n"
"It is specified by manufacturer."
msgstr ""
"Acesta este diametrul la vârf al uneltei.\n"
"Este specificat de producator."

#: flatcamGUI/PreferencesUI.py:4067 flatcamTools/ToolCalculators.py:100
msgid "Tip Angle"
msgstr "V-Unghi"

#: flatcamGUI/PreferencesUI.py:4069
msgid ""
"This is the angle on the tip of the tool.\n"
"It is specified by manufacturer."
msgstr ""
"Acesta este unghiul la vârf al uneltei.\n"
"Este specificat de producator."

#: flatcamGUI/PreferencesUI.py:4079
msgid ""
"This is depth to cut into material.\n"
"In the CNCJob object it is the CutZ parameter."
msgstr ""
"Aceasta este adâncimea la care se taie in material.\n"
"In obiectul CNCJob este parametrul >Z tăiere<."

#: flatcamGUI/PreferencesUI.py:4086 flatcamTools/ToolCalculators.py:27
msgid "ElectroPlating Calculator"
msgstr "Calculator ElectroPlacare"

#: flatcamGUI/PreferencesUI.py:4088 flatcamTools/ToolCalculators.py:149
msgid ""
"This calculator is useful for those who plate the via/pad/drill holes,\n"
"using a method like grahite ink or calcium hypophosphite ink or palladium "
"chloride."
msgstr ""
"Acest calculator este util pentru aceia care plachează găuri/vias\n"
"folosind o metoda cum ar fi:\n"
"- cerneala grafitate (carbon)\n"
"- clorura paladiu\n"
"- hipofosfit de calciu."

#: flatcamGUI/PreferencesUI.py:4098 flatcamTools/ToolCalculators.py:158
msgid "Board Length"
msgstr "Lung. plăcii"

#: flatcamGUI/PreferencesUI.py:4100 flatcamTools/ToolCalculators.py:162
msgid "This is the board length. In centimeters."
msgstr ""
"Aceasta este lungimea PCB-ului.\n"
"In centimetri."

#: flatcamGUI/PreferencesUI.py:4106 flatcamTools/ToolCalculators.py:164
msgid "Board Width"
msgstr "Lăt. plăcii"

#: flatcamGUI/PreferencesUI.py:4108 flatcamTools/ToolCalculators.py:168
msgid "This is the board width.In centimeters."
msgstr ""
"Aceasta este lăţimea PCB-ului.\n"
"In centimetri."

#: flatcamGUI/PreferencesUI.py:4113 flatcamTools/ToolCalculators.py:170
msgid "Current Density"
msgstr "Densitate I"

#: flatcamGUI/PreferencesUI.py:4116 flatcamTools/ToolCalculators.py:174
msgid ""
"Current density to pass through the board. \n"
"In Amps per Square Feet ASF."
msgstr ""
"Densitatea de curent care să treaca prin placa.\n"
"In ASF (amperi pe picior la patrat)."

#: flatcamGUI/PreferencesUI.py:4122 flatcamTools/ToolCalculators.py:177
msgid "Copper Growth"
msgstr "Grosime Cu"

#: flatcamGUI/PreferencesUI.py:4125 flatcamTools/ToolCalculators.py:181
msgid ""
"How thick the copper growth is intended to be.\n"
"In microns."
msgstr ""
"Cat de gros se dorește să fie stratul de cupru depus.\n"
"In microni."

#: flatcamGUI/PreferencesUI.py:4138
msgid "Transform Tool Options"
msgstr "Opțiuni Unealta Transformare"

#: flatcamGUI/PreferencesUI.py:4143
msgid ""
"Various transformations that can be applied\n"
"on a FlatCAM object."
msgstr ""
"Diverse transformări care pot fi aplicate\n"
"asupra unui obiect FlatCAM."

#: flatcamGUI/PreferencesUI.py:4153
msgid "Rotate Angle"
msgstr "Unghi Rotaţie"

#: flatcamGUI/PreferencesUI.py:4165 flatcamTools/ToolTransform.py:107
msgid "Skew_X angle"
msgstr "Unghi Deform_X"

#: flatcamGUI/PreferencesUI.py:4175 flatcamTools/ToolTransform.py:125
msgid "Skew_Y angle"
msgstr "Unghi Deform_Y"

#: flatcamGUI/PreferencesUI.py:4185 flatcamTools/ToolTransform.py:164
msgid "Scale_X factor"
msgstr "Factor Scal_X"

#: flatcamGUI/PreferencesUI.py:4187 flatcamTools/ToolTransform.py:166
msgid "Factor for scaling on X axis."
msgstr "Factor de scalare pe axa X."

#: flatcamGUI/PreferencesUI.py:4194 flatcamTools/ToolTransform.py:181
msgid "Scale_Y factor"
msgstr "Factor Scal_Y"

#: flatcamGUI/PreferencesUI.py:4196 flatcamTools/ToolTransform.py:183
msgid "Factor for scaling on Y axis."
msgstr "Factor de scalare pe axa Y."

#: flatcamGUI/PreferencesUI.py:4204 flatcamTools/ToolTransform.py:202
msgid ""
"Scale the selected object(s)\n"
"using the Scale_X factor for both axis."
msgstr ""
"Scalează obiectele selectate folosind\n"
"Factor Scal_X pentru ambele axe."

#: flatcamGUI/PreferencesUI.py:4212 flatcamTools/ToolTransform.py:211
msgid ""
"Scale the selected object(s)\n"
"using the origin reference when checked,\n"
"and the center of the biggest bounding box\n"
"of the selected objects when unchecked."
msgstr ""
"Scalează obiectele selectate folosind\n"
"originea ca referinţă atunci când este bifat.\n"
"Când nu este bifat, foloseşte ca referinţă\n"
"centrul formei inconjuatoare care cuprinde\n"
"toate obiectele selectate."

#: flatcamGUI/PreferencesUI.py:4221 flatcamTools/ToolTransform.py:239
msgid "Offset_X val"
msgstr "Ofset_X"

#: flatcamGUI/PreferencesUI.py:4223 flatcamTools/ToolTransform.py:241
msgid "Distance to offset on X axis. In current units."
msgstr "Distanta la care se face ofset pe axa X. In unitatile curente."

#: flatcamGUI/PreferencesUI.py:4230 flatcamTools/ToolTransform.py:256
msgid "Offset_Y val"
msgstr "Ofset_Y"

#: flatcamGUI/PreferencesUI.py:4232 flatcamTools/ToolTransform.py:258
msgid "Distance to offset on Y axis. In current units."
msgstr "Distanta la care se face ofset pe axa Y. In unitatile curente."

#: flatcamGUI/PreferencesUI.py:4238 flatcamTools/ToolTransform.py:313
msgid "Mirror Reference"
msgstr "Referinţă Oglindire"

#: flatcamGUI/PreferencesUI.py:4240 flatcamTools/ToolTransform.py:315
msgid ""
"Flip the selected object(s)\n"
"around the point in Point Entry Field.\n"
"\n"
"The point coordinates can be captured by\n"
"left click on canvas together with pressing\n"
"SHIFT key. \n"
"Then click Add button to insert coordinates.\n"
"Or enter the coords in format (x, y) in the\n"
"Point Entry field and click Flip on X(Y)"
msgstr ""
"Oglindește obiectele selectate in jurul punctului\n"
"de referinţă.\n"
"\n"
"Coordonatele punctului se pot obtine prin click pe \n"
"canvas simultan cu apăsarea tastei SHIFT.\n"
"Apoi apasă pe butonul >Adaugă< pentru a insera\n"
"coordonatele.\n"
"Alternativ se pot introduce coordonatele manual,\n"
"in forma (x, y).\n"
"La final apasă butonul de oglindire pe axa dorită"

#: flatcamGUI/PreferencesUI.py:4251 flatcamTools/ToolTransform.py:326
msgid " Mirror Ref. Point"
msgstr " Pt. Ref. Oglindire"

#: flatcamGUI/PreferencesUI.py:4253 flatcamTools/ToolTransform.py:328
msgid ""
"Coordinates in format (x, y) used as reference for mirroring.\n"
"The 'x' in (x, y) will be used when using Flip on X and\n"
"the 'y' in (x, y) will be used when using Flip on Y and"
msgstr ""
"Coordonatele in format (x, y) ale punctului de referinţă pentru\n"
"oglindire.\n"
"X din (x,y) se va folosi când se face oglindirea pe axa X\n"
"Y din (x,y) se va folosi când se face oglindirea pe axa Y si"

#: flatcamGUI/PreferencesUI.py:4270
msgid "SolderPaste Tool Options"
msgstr "Opțiuni Unealta Pasta Fludor"

#: flatcamGUI/PreferencesUI.py:4275
msgid ""
"A tool to create GCode for dispensing\n"
"solder paste onto a PCB."
msgstr ""
"O unealtă care crează cod G-Code pentru dispensarea de pastă de fludor\n"
"pe padurile unui PCB."

#: flatcamGUI/PreferencesUI.py:4286
msgid "Diameters of nozzle tools, separated by ','"
msgstr "Diametrele uneltelor (nozzle), separate prin virgula."

#: flatcamGUI/PreferencesUI.py:4293
msgid "New Nozzle Dia"
msgstr "Dia nou"

#: flatcamGUI/PreferencesUI.py:4295 flatcamTools/ToolSolderPaste.py:103
msgid "Diameter for the new Nozzle tool to add in the Tool Table"
msgstr ""
"Valoarea pentru diametrul unei noi unelte (nozzle) pentru adaugare in Tabela "
"de Unelte"

#: flatcamGUI/PreferencesUI.py:4303 flatcamTools/ToolSolderPaste.py:166
msgid "Z Dispense Start"
msgstr "Z start disp."

#: flatcamGUI/PreferencesUI.py:4305 flatcamTools/ToolSolderPaste.py:168
msgid "The height (Z) when solder paste dispensing starts."
msgstr "Înălţimea (Z) când incepe dispensarea de pastă de fludor."

#: flatcamGUI/PreferencesUI.py:4312 flatcamTools/ToolSolderPaste.py:174
msgid "Z Dispense"
msgstr "Z disp."

#: flatcamGUI/PreferencesUI.py:4314 flatcamTools/ToolSolderPaste.py:176
msgid "The height (Z) when doing solder paste dispensing."
msgstr "Înălţimea (Z) in timp ce se face dispensarea de pastă de fludor."

#: flatcamGUI/PreferencesUI.py:4321 flatcamTools/ToolSolderPaste.py:182
msgid "Z Dispense Stop"
msgstr "Z stop disp."

#: flatcamGUI/PreferencesUI.py:4323 flatcamTools/ToolSolderPaste.py:184
msgid "The height (Z) when solder paste dispensing stops."
msgstr "Înălţimea (Z) când se opreste dispensarea de pastă de fludor."

#: flatcamGUI/PreferencesUI.py:4330 flatcamTools/ToolSolderPaste.py:190
msgid "Z Travel"
msgstr "Z deplasare"

#: flatcamGUI/PreferencesUI.py:4332 flatcamTools/ToolSolderPaste.py:192
msgid ""
"The height (Z) for travel between pads\n"
"(without dispensing solder paste)."
msgstr ""
"Înălţimea (Z) când se face deplasare între pad-uri.\n"
"(fără dispensare de pastă de fludor)."

#: flatcamGUI/PreferencesUI.py:4340 flatcamTools/ToolSolderPaste.py:199
msgid "Z Toolchange"
msgstr "Z schimb. unealtă"

#: flatcamGUI/PreferencesUI.py:4342 flatcamTools/ToolSolderPaste.py:201
msgid "The height (Z) for tool (nozzle) change."
msgstr "Înălţimea (Z) când se schimbă unealta (nozzle-ul)."

#: flatcamGUI/PreferencesUI.py:4351 flatcamTools/ToolSolderPaste.py:209
msgid ""
"The X,Y location for tool (nozzle) change.\n"
"The format is (x, y) where x and y are real numbers."
msgstr ""
"Coordonatele X, Y pentru schimbarea uneltei (nozzle).\n"
"Formatul este (x,y) unde x și y sunt numere Reale."

#: flatcamGUI/PreferencesUI.py:4359 flatcamTools/ToolSolderPaste.py:216
msgid "Feedrate X-Y"
msgstr "Feedrate X-Y"

#: flatcamGUI/PreferencesUI.py:4361 flatcamTools/ToolSolderPaste.py:218
msgid "Feedrate (speed) while moving on the X-Y plane."
msgstr "Viteza de deplasare a uneltei când se deplasează in planul X-Y."

#: flatcamGUI/PreferencesUI.py:4370 flatcamTools/ToolSolderPaste.py:226
msgid ""
"Feedrate (speed) while moving vertically\n"
"(on Z plane)."
msgstr ""
"Viteza de deplasare a uneltei când se misca in plan vertical (planul Z)."

#: flatcamGUI/PreferencesUI.py:4378 flatcamTools/ToolSolderPaste.py:233
msgid "Feedrate Z Dispense"
msgstr "Feedrate Z disp."

#: flatcamGUI/PreferencesUI.py:4380
msgid ""
"Feedrate (speed) while moving up vertically\n"
"to Dispense position (on Z plane)."
msgstr ""
"Viteza de deplasare la mișcarea pe verticala spre\n"
"poziţia de dispensare (in planul Z)."

#: flatcamGUI/PreferencesUI.py:4388 flatcamTools/ToolSolderPaste.py:242
msgid "Spindle Speed FWD"
msgstr "Viteza motor inainte"

#: flatcamGUI/PreferencesUI.py:4390 flatcamTools/ToolSolderPaste.py:244
msgid ""
"The dispenser speed while pushing solder paste\n"
"through the dispenser nozzle."
msgstr ""
"Viteza motorului de dispensare in timp ce impinge pastă de fludor\n"
"prin orificiul uneltei de dispensare."

#: flatcamGUI/PreferencesUI.py:4398 flatcamTools/ToolSolderPaste.py:251
msgid "Dwell FWD"
msgstr "Pauza FWD"

#: flatcamGUI/PreferencesUI.py:4400 flatcamTools/ToolSolderPaste.py:253
msgid "Pause after solder dispensing."
msgstr "Pauza dupa dispensarea de pastă de fludor."

#: flatcamGUI/PreferencesUI.py:4407 flatcamTools/ToolSolderPaste.py:259
msgid "Spindle Speed REV"
msgstr "Viteza motor inapoi"

#: flatcamGUI/PreferencesUI.py:4409 flatcamTools/ToolSolderPaste.py:261
msgid ""
"The dispenser speed while retracting solder paste\n"
"through the dispenser nozzle."
msgstr ""
"Viteza motorului de dispensare in timp ce retrage pasta de fludor\n"
"prin orificiul uneltei de dispensare."

#: flatcamGUI/PreferencesUI.py:4417 flatcamTools/ToolSolderPaste.py:268
msgid "Dwell REV"
msgstr "Pauza REV"

#: flatcamGUI/PreferencesUI.py:4419 flatcamTools/ToolSolderPaste.py:270
msgid ""
"Pause after solder paste dispenser retracted,\n"
"to allow pressure equilibrium."
msgstr ""
"Pauza dupa ce pasta de fludor a fost retrasă,\n"
"necesară pt a ajunge la un echilibru al presiunilor."

#: flatcamGUI/PreferencesUI.py:4428 flatcamTools/ToolSolderPaste.py:278
msgid "Files that control the GCode generation."
msgstr "Fişiere care controlează generarea codului G-Code."

#: flatcamGUI/PreferencesUI.py:4443
msgid "Substractor Tool Options"
msgstr "Opțiuni Unealta Substracţie"

#: flatcamGUI/PreferencesUI.py:4448
msgid ""
"A tool to substract one Gerber or Geometry object\n"
"from another of the same type."
msgstr ""
"O unealtă pentru scăderea unui obiect Gerber sau Geometry\n"
"din altul de același tip."

#: flatcamGUI/PreferencesUI.py:4453 flatcamTools/ToolSub.py:135
msgid "Close paths"
msgstr "Închide căile"

#: flatcamGUI/PreferencesUI.py:4454 flatcamTools/ToolSub.py:136
msgid ""
"Checking this will close the paths cut by the Geometry substractor object."
msgstr ""
"Verificând aceasta, se vor închide căile tăiate de obiectul tăietor de tip "
"Geometrie."

#: flatcamGUI/PreferencesUI.py:4465
msgid "Excellon File associations"
msgstr "Asocieri fisiere Excellon"

#: flatcamGUI/PreferencesUI.py:4477 flatcamGUI/PreferencesUI.py:4549
#: flatcamGUI/PreferencesUI.py:4618 flatcamGUI/PreferencesUI.py:4687
msgid "Restore"
msgstr "Restabilire"

#: flatcamGUI/PreferencesUI.py:4478 flatcamGUI/PreferencesUI.py:4550
#: flatcamGUI/PreferencesUI.py:4619
msgid "Restore the extension list to the default state."
msgstr "Restabiliți lista de extensii la starea implicită."

#: flatcamGUI/PreferencesUI.py:4479 flatcamGUI/PreferencesUI.py:4551
#: flatcamGUI/PreferencesUI.py:4620 flatcamGUI/PreferencesUI.py:4689
msgid "Delete All"
msgstr "Sterge tot"

#: flatcamGUI/PreferencesUI.py:4480 flatcamGUI/PreferencesUI.py:4552
#: flatcamGUI/PreferencesUI.py:4621
msgid "Delete all extensions from the list."
msgstr "Ștergeți toate extensiile din listă."

#: flatcamGUI/PreferencesUI.py:4488 flatcamGUI/PreferencesUI.py:4560
#: flatcamGUI/PreferencesUI.py:4629
msgid "Extensions list"
msgstr "Lista de extensii"

#: flatcamGUI/PreferencesUI.py:4490 flatcamGUI/PreferencesUI.py:4562
#: flatcamGUI/PreferencesUI.py:4631
msgid ""
"List of file extensions to be\n"
"associated with FlatCAM."
msgstr ""
"Listă de extensii fisiere care să fie\n"
"associate cu FlatCAM."

#: flatcamGUI/PreferencesUI.py:4510 flatcamGUI/PreferencesUI.py:4582
#: flatcamGUI/PreferencesUI.py:4650 flatcamGUI/PreferencesUI.py:4721
msgid "Extension"
msgstr "Extensie fișier"

#: flatcamGUI/PreferencesUI.py:4511 flatcamGUI/PreferencesUI.py:4583
#: flatcamGUI/PreferencesUI.py:4651
msgid "A file extension to be added or deleted to the list."
msgstr "O extensie de fișier care trebuie adăugată sau ștersă din listă."

#: flatcamGUI/PreferencesUI.py:4519 flatcamGUI/PreferencesUI.py:4591
#: flatcamGUI/PreferencesUI.py:4659
msgid "Add Extension"
msgstr "Adaugă Extensie"

#: flatcamGUI/PreferencesUI.py:4520 flatcamGUI/PreferencesUI.py:4592
#: flatcamGUI/PreferencesUI.py:4660
msgid "Add a file extension to the list"
msgstr "Adăugați o extensie de fișier la listă"

#: flatcamGUI/PreferencesUI.py:4521 flatcamGUI/PreferencesUI.py:4593
#: flatcamGUI/PreferencesUI.py:4661
msgid "Delete Extension"
msgstr "Ștergeți Extensia"

#: flatcamGUI/PreferencesUI.py:4522 flatcamGUI/PreferencesUI.py:4594
#: flatcamGUI/PreferencesUI.py:4662
msgid "Delete a file extension from the list"
msgstr "Ștergeți o extensie de fișier din listă"

#: flatcamGUI/PreferencesUI.py:4529 flatcamGUI/PreferencesUI.py:4601
#: flatcamGUI/PreferencesUI.py:4669
msgid "Apply Association"
msgstr "Aplicați Asociere"

#: flatcamGUI/PreferencesUI.py:4530 flatcamGUI/PreferencesUI.py:4602
#: flatcamGUI/PreferencesUI.py:4670
msgid ""
"Apply the file associations between\n"
"FlatCAM and the files with above extensions.\n"
"They will be active after next logon.\n"
"This work only in Windows."
msgstr ""
"Aplică asocierea de fisiere intre\n"
"FlatCAM si fisierele cu extensiile de mai sus.\n"
"Vor fi active după următorul login.\n"
"Functionează numai pt Windows."

#: flatcamGUI/PreferencesUI.py:4547
msgid "GCode File associations"
msgstr "Asocierile de fisiere G-Code"

#: flatcamGUI/PreferencesUI.py:4616
msgid "Gerber File associations"
msgstr "Asocierile de fisiere Gerber"

#: flatcamGUI/PreferencesUI.py:4685
msgid "Autocompleter Keywords"
msgstr "Cuvinte cheie pt autocomplete"

#: flatcamGUI/PreferencesUI.py:4688
msgid "Restore the autocompleter keywords list to the default state."
msgstr ""
"Restaurați lista cuvinte cheie pentru autocompletere la starea implicită."

#: flatcamGUI/PreferencesUI.py:4690
msgid "Delete all autocompleter keywords from the list."
msgstr "Ștergeți din listă toate cuvintele cheie pentru autocompletare."

#: flatcamGUI/PreferencesUI.py:4698
msgid "Keywords list"
msgstr "Lista de cuvinte cheie"

#: flatcamGUI/PreferencesUI.py:4700
msgid ""
"List of keywords used by\n"
"the autocompleter in FlatCAM.\n"
"The autocompleter is installed\n"
"in the Code Editor and for the Tcl Shell."
msgstr ""
"Lista cuvintelor cheie utilizate de\n"
"autocompleter în FlatCAM.\n"
"Autocompleterul este instalat\n"
"în Editorul de coduri și pentru Shell Tcl."

#: flatcamGUI/PreferencesUI.py:4722
msgid "A keyword to be added or deleted to the list."
msgstr "Un cuvânt cheie care trebuie adăugat sau șters la listă."

#: flatcamGUI/PreferencesUI.py:4730
msgid "Add keyword"
msgstr "Adăugați cuvant cheie"

#: flatcamGUI/PreferencesUI.py:4731
msgid "Add a keyword to the list"
msgstr "Adăugați un cuvânt cheie la listă"

#: flatcamGUI/PreferencesUI.py:4732
msgid "Delete keyword"
msgstr "Ștergeți cuvântul cheie"

#: flatcamGUI/PreferencesUI.py:4733
msgid "Delete a keyword from the list"
msgstr "Ștergeți un cuvânt cheie din listă"

#: flatcamParsers/ParseFont.py:305
msgid "Font not supported, try another one."
msgstr "Fontul nu este acceptat, incearcă altul."

#: flatcamTools/ToolCalculators.py:24
msgid "Calculators"
msgstr "Calculatoare"

#: flatcamTools/ToolCalculators.py:26
msgid "Units Calculator"
msgstr "Calculator Unitati"

#: flatcamTools/ToolCalculators.py:68
msgid "Here you enter the value to be converted from INCH to MM"
msgstr "Valorile pentru conversie din INCH in MM"

#: flatcamTools/ToolCalculators.py:73
msgid "Here you enter the value to be converted from MM to INCH"
msgstr "Valorile pentru conversie din MM in INCH"

#: flatcamTools/ToolCalculators.py:104
msgid ""
"This is the angle of the tip of the tool.\n"
"It is specified by manufacturer."
msgstr ""
"Acesta este unghiul uneltei la vârf.\n"
"Producatorul il specifica in foaia de catalog."

#: flatcamTools/ToolCalculators.py:111
msgid ""
"This is the depth to cut into the material.\n"
"In the CNCJob is the CutZ parameter."
msgstr ""
"Acest param. este adâncimea de tăiere in material.\n"
"In obiectul CNCJob este parametrul >Z tăiere<."

#: flatcamTools/ToolCalculators.py:114
msgid "Tool Diameter"
msgstr "Dia unealtă"

#: flatcamTools/ToolCalculators.py:118
msgid ""
"This is the tool diameter to be entered into\n"
"FlatCAM Gerber section.\n"
"In the CNCJob section it is called >Tool dia<."
msgstr ""
"Acesta este diametrul uneltei care trebuie introdus in\n"
"sectiunea FlatCAM Gerber.\n"
"In sectiunea CNCJob este numit >Dia unealtă<."

#: flatcamTools/ToolCalculators.py:129 flatcamTools/ToolCalculators.py:210
msgid "Calculate"
msgstr "Calculează"

#: flatcamTools/ToolCalculators.py:132
msgid ""
"Calculate either the Cut Z or the effective tool diameter,\n"
"  depending on which is desired and which is known. "
msgstr ""
"Calculează ori valorea >Z tăiere< ori valoarea efectiva a diametrului "
"uneltei,\n"
"depinzand de care dintre acestea este cunoscuta. "

#: flatcamTools/ToolCalculators.py:186
msgid "Current Value"
msgstr "Intensitate"

#: flatcamTools/ToolCalculators.py:190
msgid ""
"This is the current intensity value\n"
"to be set on the Power Supply. In Amps."
msgstr ""
"Intensitatea curentului electric care se va seta\n"
"in sursa de alimentare. In Amperi."

#: flatcamTools/ToolCalculators.py:194
msgid "Time"
msgstr "Durată"

#: flatcamTools/ToolCalculators.py:198
msgid ""
"This is the calculated time required for the procedure.\n"
"In minutes."
msgstr ""
"TImpul necesar (calculat) pentru\n"
"efectuarea procedurii. In minute."

#: flatcamTools/ToolCalculators.py:213
msgid ""
"Calculate the current intensity value and the procedure time,\n"
"depending on the parameters above"
msgstr ""
"Calculează intensitatea curentului cat și durata procedurii\n"
"in funcţie de parametrii de mai sus"

#: flatcamTools/ToolCalculators.py:262
msgid "Calc. Tool"
msgstr "Unealta Calc."

#: flatcamTools/ToolCutOut.py:18
msgid "Cutout PCB"
msgstr "Decupare PCB"

#: flatcamTools/ToolCutOut.py:55
msgid ""
"Specify the type of object to be cutout.\n"
"It can be of type: Gerber or Geometry.\n"
"What is selected here will dictate the kind\n"
"of objects that will populate the 'Object' combobox."
msgstr ""
"Specifica obiectul care va fi decupat.\n"
"Poate fi de tip: Gerber sau Geometrie.\n"
"Ce se va selecta aici va controla tipul de \n"
"obiecte care vor aparea in combobox-ul\n"
"numit >Obiect<."

#: flatcamTools/ToolCutOut.py:71
msgid "Object to be cutout.                        "
msgstr "Obiectul FlatCAM care va fi decupat. "

#: flatcamTools/ToolCutOut.py:100
msgid "Margin:"
msgstr "Margine:"

#: flatcamTools/ToolCutOut.py:110
msgid "Gap size:"
msgstr "Dim. punte:"

#: flatcamTools/ToolCutOut.py:137
msgid "A. Automatic Bridge Gaps"
msgstr "A. Punţi realiz. automat"

#: flatcamTools/ToolCutOut.py:139
msgid "This section handle creation of automatic bridge gaps."
msgstr ""
"Aceasta sectiune va permite crearea in mod automat\n"
"a pana la 8 punţi."

#: flatcamTools/ToolCutOut.py:150
msgid ""
"Number of gaps used for the Automatic cutout.\n"
"There can be maximum 8 bridges/gaps.\n"
"The choices are:\n"
"- None  - no gaps\n"
"- lr    - left + right\n"
"- tb    - top + bottom\n"
"- 4     - left + right +top + bottom\n"
"- 2lr   - 2*left + 2*right\n"
"- 2tb  - 2*top + 2*bottom\n"
"- 8     - 2*left + 2*right +2*top + 2*bottom"
msgstr ""
"Numărul de punţi folosite in decupare.\n"
"Pot fi un număr maxim de 8 punţi aranjate in felul\n"
"următor:\n"
"- Nici unul - nu există spatii\n"
"- lr = stânga -dreapta\n"
"- tb = sus - jos\n"
"- 4 = stânga -dreapta - sus - jos\n"
"- 2lr = 2* stânga - 2* dreapta\n"
"- 2tb = 2* sus - 2* jos\n"
"- 8 = 2* stânga - 2* dreapta - 2* sus - 2* jos"

#: flatcamTools/ToolCutOut.py:174
msgid "FreeForm"
msgstr "Formă liberă"

#: flatcamTools/ToolCutOut.py:176
msgid ""
"The cutout shape can be of ny shape.\n"
"Useful when the PCB has a non-rectangular shape."
msgstr ""
"Decupajul poate avea orice forma.\n"
"Folositor când PCB-ul are o forma neregulata."

#: flatcamTools/ToolCutOut.py:185
msgid ""
"Cutout the selected object.\n"
"The cutout shape can be of any shape.\n"
"Useful when the PCB has a non-rectangular shape."
msgstr ""
"Decupează obiectul selectat.\n"
"Forma decupajului poate avea orice forma.\n"
"Folositor când PCB-ul are o forma neregulata."

#: flatcamTools/ToolCutOut.py:194
msgid "Rectangular"
msgstr "Patrulater"

#: flatcamTools/ToolCutOut.py:196
msgid ""
"The resulting cutout shape is\n"
"always a rectangle shape and it will be\n"
"the bounding box of the Object."
msgstr ""
"Forma decupajului va fi mereu de forma\n"
"patratica și va fi forma înconjurătoare a\n"
"obiectului FlatCAM decupat."

#: flatcamTools/ToolCutOut.py:205
msgid ""
"Cutout the selected object.\n"
"The resulting cutout shape is\n"
"always a rectangle shape and it will be\n"
"the bounding box of the Object."
msgstr ""
"Decupează obiectul selectat.\n"
"Forma decupajului este tot timpul dreptunghiulara.."

#: flatcamTools/ToolCutOut.py:213
msgid "B. Manual Bridge Gaps"
msgstr "B. Punţi realiz. manual"

#: flatcamTools/ToolCutOut.py:215
msgid ""
"This section handle creation of manual bridge gaps.\n"
"This is done by mouse clicking on the perimeter of the\n"
"Geometry object that is used as a cutout object. "
msgstr ""
"Permite realizarea de punţi de sustinere in mod manual.\n"
"Se apasa butonul corepsunzator și apoi click cu mouse-ul\n"
"pe perimetrul formei de decupaj. Daca se face simultan cu\n"
"apasarea tastei CTRL, operatia se va repeta automat pana când\n"
"se va apasa tasta 'Escape'. "

#: flatcamTools/ToolCutOut.py:231
msgid "Geo Obj"
msgstr "Obiect Geo"

#: flatcamTools/ToolCutOut.py:233
msgid "Geometry object used to create the manual cutout."
msgstr "Obiect tip Geometrie folosit pentru crearea decupajului manual."

#: flatcamTools/ToolCutOut.py:244
msgid "Manual Geo"
msgstr "Geo manual"

#: flatcamTools/ToolCutOut.py:246 flatcamTools/ToolCutOut.py:256
msgid ""
"If the object to be cutout is a Gerber\n"
"first create a Geometry that surrounds it,\n"
"to be used as the cutout, if one doesn't exist yet.\n"
"Select the source Gerber file in the top object combobox."
msgstr ""
"Daca obiectul care se decupează este un obiect Gerber,\n"
"atunci mai intai crează un obiect Geometrie care il inconjoara\n"
"urmărindu-i forma.\n"
"Selectează obiectul sursa Gerber in combobox-ul de mai sus,\n"
"numit >Obiect<."

#: flatcamTools/ToolCutOut.py:266
msgid "Manual Add Bridge Gaps"
msgstr "Adaugă punţi manual"

#: flatcamTools/ToolCutOut.py:268
msgid ""
"Use the left mouse button (LMB) click\n"
"to create a bridge gap to separate the PCB from\n"
"the surrounding material."
msgstr ""
"Folosind click LMB se crează punţi de sustinere a PCB-ului\n"
"de materialul din care este decupat."

#: flatcamTools/ToolCutOut.py:275
msgid "Generate Gap"
msgstr "Generează Punte"

#: flatcamTools/ToolCutOut.py:277
msgid ""
"Use the left mouse button (LMB) click\n"
"to create a bridge gap to separate the PCB from\n"
"the surrounding material.\n"
"The LMB click has to be done on the perimeter of\n"
"the Geometry object used as a cutout geometry."
msgstr ""
"Permite realizarea de punţi de sustinere in mod manual.\n"
"Se apasa butonul corepsunzator și apoi click cu mouse-ul\n"
"pe perimetrul formei de decupaj. Daca se face simultan cu\n"
"apasarea tastei CTRL, operatia se va repeta automat pana când\n"
"se va apasa tasta 'Escape'."

#: flatcamTools/ToolCutOut.py:376 flatcamTools/ToolCutOut.py:576
#: flatcamTools/ToolNonCopperClear.py:1098
#: flatcamTools/ToolNonCopperClear.py:1139
#: flatcamTools/ToolNonCopperClear.py:1171 flatcamTools/ToolPaint.py:1069
#: flatcamTools/ToolPanelize.py:359 flatcamTools/ToolPanelize.py:376
#: flatcamTools/ToolSub.py:254 flatcamTools/ToolSub.py:269
#: flatcamTools/ToolSub.py:456 flatcamTools/ToolSub.py:471
#: tclCommands/TclCommandCopperClear.py:131
#: tclCommands/TclCommandCopperClear.py:208 tclCommands/TclCommandPaint.py:133
msgid "Could not retrieve object"
msgstr "Nu s-a putut incărca obiectul"

#: flatcamTools/ToolCutOut.py:381
msgid ""
"There is no object selected for Cutout.\n"
"Select one and try again."
msgstr ""
"Nu este nici-un obiect selectat pentru decupaj.\n"
"Selectează unul și încearcă din nou."

#: flatcamTools/ToolCutOut.py:397 flatcamTools/ToolCutOut.py:595
#: flatcamTools/ToolCutOut.py:765 flatcamTools/ToolCutOut.py:867
msgid "Tool Diameter is zero value. Change it to a positive real number."
msgstr "Diametrul uneltei este zero. Schimbă intr-o valoare pozitivă Reală."

#: flatcamTools/ToolCutOut.py:413 flatcamTools/ToolCutOut.py:611
#: flatcamTools/ToolCutOut.py:883
msgid "Margin value is missing or wrong format. Add it and retry."
msgstr ""
"Valoarea marginii lipseste sau este in format gresit. Adaugă din nou și "
"reîncearcă."

#: flatcamTools/ToolCutOut.py:424 flatcamTools/ToolCutOut.py:622
#: flatcamTools/ToolCutOut.py:776
msgid "Gap size value is missing or wrong format. Add it and retry."
msgstr ""
"Valoarea dimensiunii punte lipseste sau este in format gresit. Adaugă din "
"nou și reîncearcă."

#: flatcamTools/ToolCutOut.py:430 flatcamTools/ToolCutOut.py:629
msgid "Number of gaps value is missing. Add it and retry."
msgstr ""
"Numărul de punţi lipseste sau este in format gresit. Adaugă din nou și "
"reîncearcă."

#: flatcamTools/ToolCutOut.py:435 flatcamTools/ToolCutOut.py:633
msgid ""
"Gaps value can be only one of: 'None', 'lr', 'tb', '2lr', '2tb', 4 or 8. "
"Fill in a correct value and retry. "
msgstr ""
"Valoarea spatiilor poate fi doar una dintre: „Niciuna”, „lr”, „tb”, „2lr”, "
"„2tb”, 4 sau 8. Completați o valoare corectă și încercați din nou. "

#: flatcamTools/ToolCutOut.py:440 flatcamTools/ToolCutOut.py:639
msgid ""
"Cutout operation cannot be done on a multi-geo Geometry.\n"
"Optionally, this Multi-geo Geometry can be converted to Single-geo "
"Geometry,\n"
"and after that perform Cutout."
msgstr ""
"Operatia de decupaj nu se poate efectua cu un obiect Geometrie tip "
"MultiGeo.\n"
"Se poate insa converti MultiGeo in tip SingleGeo și apoi se poate efectua "
"decupajul."

#: flatcamTools/ToolCutOut.py:559 flatcamTools/ToolCutOut.py:744
msgid "Any form CutOut operation finished."
msgstr "Operatia de decupaj cu formă liberă s-a terminat."

#: flatcamTools/ToolCutOut.py:580 flatcamTools/ToolNonCopperClear.py:1102
#: flatcamTools/ToolPaint.py:965 flatcamTools/ToolPanelize.py:366
#: tclCommands/TclCommandBbox.py:66 tclCommands/TclCommandNregions.py:65
msgid "Object not found"
msgstr "Obiectul nu a fost gasit"

#: flatcamTools/ToolCutOut.py:749
msgid ""
"Click on the selected geometry object perimeter to create a bridge gap ..."
msgstr ""
"Click pe perimetrul obiectului tip Geometrie selectat\n"
"pentru a crea o punte separatoare."

#: flatcamTools/ToolCutOut.py:785 flatcamTools/ToolCutOut.py:812
msgid "Could not retrieve Geometry object"
msgstr "Nu s-a putut incărca obiectul Geometrie"

#: flatcamTools/ToolCutOut.py:817
msgid "Geometry object for manual cutout not found"
msgstr "Obiectul Geometrie pentru decupaj manual nu este găsit"

#: flatcamTools/ToolCutOut.py:827
msgid "Added manual Bridge Gap."
msgstr "O punte a fost adăugată in mod manual."

#: flatcamTools/ToolCutOut.py:839
msgid "Could not retrieve Gerber object"
msgstr "Nu s-a putut incărca obiectul Gerber"

#: flatcamTools/ToolCutOut.py:844
msgid ""
"There is no Gerber object selected for Cutout.\n"
"Select one and try again."
msgstr ""
"Nu există obiect selectat pt operatia de decupare.\n"
"Selectează un obiect si incearcă din nou."

#: flatcamTools/ToolCutOut.py:850
msgid ""
"The selected object has to be of Gerber type.\n"
"Select a Gerber file and try again."
msgstr ""
"Obiectul selectat trebuie să fie de tip Gerber.\n"
"Selectează un obiect Gerber si incearcă din nou."

#: flatcamTools/ToolCutOut.py:905
msgid "Geometry not supported for cutout"
msgstr "Geometria nu este acceptată pentru decupaj"

#: flatcamTools/ToolCutOut.py:957
msgid "Making manual bridge gap..."
msgstr "Se generează o punte separatoare in mod manual..."

#: flatcamTools/ToolDblSided.py:18
msgid "2-Sided PCB"
msgstr "2-fețe PCB"

#: flatcamTools/ToolDblSided.py:52 flatcamTools/ToolDblSided.py:76
#: flatcamTools/ToolDblSided.py:100
msgid "Mirror"
msgstr "Oglindește"

#: flatcamTools/ToolDblSided.py:54 flatcamTools/ToolDblSided.py:78
#: flatcamTools/ToolDblSided.py:102
msgid ""
"Mirrors (flips) the specified object around \n"
"the specified axis. Does not create a new \n"
"object, but modifies it."
msgstr ""
"Oglindește obiectul specificat pe axa specificata.\n"
"Nu crează un obiect nou ci il modifica."

#: flatcamTools/ToolDblSided.py:73
msgid "Excellon Object to be mirrored."
msgstr "Obiectul Excellon care va fi oglindit."

#: flatcamTools/ToolDblSided.py:97
msgid "Geometry Obj to be mirrored."
msgstr "Obiectul Geometrie care va fi oglindit."

#: flatcamTools/ToolDblSided.py:133
msgid "Axis Ref:"
msgstr "Axa de ref.:"

#: flatcamTools/ToolDblSided.py:152
msgid "Point/Box Reference"
msgstr "Referință Punct/Container"

#: flatcamTools/ToolDblSided.py:154
msgid ""
"If 'Point' is selected above it store the coordinates (x, y) through which\n"
"the mirroring axis passes.\n"
"If 'Box' is selected above, select here a FlatCAM object (Gerber, Exc or "
"Geo).\n"
"Through the center of this object pass the mirroring axis selected above."
msgstr ""
"Daca 'Punct' este selectat mai sus, atunci va stoca coordonatele (x,y) prin "
"care\n"
"axa de oglindire trece.\n"
"Daca 'Container' este selectat mai sus atunci va fi disponibila aici o lista "
"de obiecte\n"
"FlatCAM: Gerber, Excellon sau Geometrie. Prin mijocul geometric al acestor "
"obiecte\n"
"va trece axa de oglindire selectată mai sus."

#: flatcamTools/ToolDblSided.py:162
msgid ""
"Add the coordinates in format <b>(x, y)</b> through which the mirroring "
"axis \n"
" selected in 'MIRROR AXIS' pass.\n"
"The (x, y) coordinates are captured by pressing SHIFT key\n"
"and left mouse button click on canvas or you can enter the coords manually."
msgstr ""
"Adaugă coordonatele in formatul <b>(x, y)</b> ale punctului prin care trece\n"
"axa de oglindire selectată mai sus.\n"
"Coordonatele (x,y) pot fi obtinute prin combinatia tasta SHIFT + click mouse "
"pe\n"
"canvas sau le puteti introduce manual."

#: flatcamTools/ToolDblSided.py:182 flatcamTools/ToolNonCopperClear.py:424
#: flatcamTools/ToolPaint.py:322
msgid "Gerber   Reference Box Object"
msgstr "Obiectul container al Gerber de referinţă"

#: flatcamTools/ToolDblSided.py:183 flatcamTools/ToolNonCopperClear.py:425
#: flatcamTools/ToolPaint.py:323
msgid "Excellon Reference Box Object"
msgstr "Obiectul container al Excellon de referinţă"

#: flatcamTools/ToolDblSided.py:184 flatcamTools/ToolNonCopperClear.py:426
#: flatcamTools/ToolPaint.py:324
msgid "Geometry Reference Box Object"
msgstr "Obiectul container al Geo de referinţă"

#: flatcamTools/ToolDblSided.py:192
msgid "Alignment Drill Coordinates"
msgstr "Dia. găuri de aliniere"

#: flatcamTools/ToolDblSided.py:194
msgid ""
"Alignment holes (x1, y1), (x2, y2), ... on one side of the mirror axis. For "
"each set of (x, y) coordinates\n"
"entered here, a pair of drills will be created:\n"
"\n"
"- one drill at the coordinates from the field\n"
"- one drill in mirror position over the axis selected above in the 'Mirror "
"Axis'."
msgstr ""
"Găuri de aliniere in formatul unei liste: (x1, y1), (x2, y2) samd.\n"
"Pentru fiecare punct din lista de mai sus (cu coord. (x,y) )\n"
"un alt punct va fi creat in oglinda.\n"
"- un punct cu coord. specificate\n"
"- un punct cu coord. in poziţia oglindita pe axa selectată mai sus."

#: flatcamTools/ToolDblSided.py:209
msgid ""
"Add alignment drill holes coords in the format: (x1, y1), (x2, y2), ... \n"
"on one side of the mirror axis.\n"
"\n"
"The coordinates set can be obtained:\n"
"- press SHIFT key and left mouse clicking on canvas. Then click Add.\n"
"- press SHIFT key and left mouse clicking on canvas. Then CTRL+V in the "
"field.\n"
"- press SHIFT key and left mouse clicking on canvas. Then RMB click in the "
"field and click Paste.\n"
"- by entering the coords manually in the format: (x1, y1), (x2, y2), ..."
msgstr ""
"Adăugă coordonatele pt găurile de aliniere in formatul: (x1,y1), (x2,y2) "
"samd\n"
"\n"
"Coordonatele pot fi obtinute prin urmatoarele metoda:\n"
"- apasare tasta SHIFT + click mouse pe canvas. Apoi apasa butonul 'Adaugă'.\n"
"- apasare tasta SHIFT + click mouse pe canvas. Apoi CTRL + V combo in câmpul "
"de editare\n"
"- apasare tasta SHIFT + click mouse pe canvas. Apoi click dreapta și Paste "
"in câmpul de edit.\n"
"- se intorduc manual in formatul (x1,y1), (x2,y2) ..."

#: flatcamTools/ToolDblSided.py:223
msgid "Alignment Drill Diameter"
msgstr "Dia. găuri de aliniere"

#: flatcamTools/ToolDblSided.py:246
msgid "Create Excellon Object"
msgstr "Crează un obiect Excellon"

#: flatcamTools/ToolDblSided.py:248
msgid ""
"Creates an Excellon Object containing the\n"
"specified alignment holes and their mirror\n"
"images."
msgstr ""
"Crează un obiect Excellon care contine găurile\n"
"de aliniere specificate cat și cele in oglinda."

#: flatcamTools/ToolDblSided.py:254
msgid "Reset"
msgstr "Reset"

#: flatcamTools/ToolDblSided.py:256
msgid "Resets all the fields."
msgstr "Resetează toate câmpurile cu informatii."

#: flatcamTools/ToolDblSided.py:306
msgid "2-Sided Tool"
msgstr "Unealta 2-fețe"

#: flatcamTools/ToolDblSided.py:331
msgid ""
"'Point' reference is selected and 'Point' coordinates are missing. Add them "
"and retry."
msgstr ""
"Referința 'Punct' este selectată dar coordonatele sale lipsesc. Adăugă-le si "
"încearcă din nou."

#: flatcamTools/ToolDblSided.py:350
msgid "There is no Box reference object loaded. Load one and retry."
msgstr ""
"Nici-un obiect container nu este incărcat. Încarcă unul și încearcă din nou."

#: flatcamTools/ToolDblSided.py:373
msgid "No value or wrong format in Drill Dia entry. Add it and retry."
msgstr ""
"Val. pt dia burghiu lipseste sau este in format gresit. Adaugă una și "
"încearcă din nou."

#: flatcamTools/ToolDblSided.py:380
msgid "There are no Alignment Drill Coordinates to use. Add them and retry."
msgstr ""
"Nu exista coord. pentru găurile de aliniere. Adaugă-le și încearcă din nou."

#: flatcamTools/ToolDblSided.py:403
msgid "Excellon object with alignment drills created..."
msgstr "Obiectul Excellon conținând găurile de aliniere a fost creat ..."

#: flatcamTools/ToolDblSided.py:412
msgid "There is no Gerber object loaded ..."
msgstr "Nu este nici-un obiect Gerber incărcat ..."

#: flatcamTools/ToolDblSided.py:416 flatcamTools/ToolDblSided.py:459
#: flatcamTools/ToolDblSided.py:503
msgid "Only Gerber, Excellon and Geometry objects can be mirrored."
msgstr "Doar obiectele de tip Geometrie, Excellon și Gerber pot fi oglindite."

#: flatcamTools/ToolDblSided.py:426
msgid ""
"'Point' coordinates missing. Using Origin (0, 0) as mirroring reference."
msgstr ""
"Coord. 'Punct'-ului lipsesc. Se folosesc coord. punctului Origine (0,0) ca "
"ref. pt oglindire."

#: flatcamTools/ToolDblSided.py:436 flatcamTools/ToolDblSided.py:480
#: flatcamTools/ToolDblSided.py:517
msgid "There is no Box object loaded ..."
msgstr "Nu este incărcat nici-un obiect container ..."

#: flatcamTools/ToolDblSided.py:446 flatcamTools/ToolDblSided.py:490
#: flatcamTools/ToolDblSided.py:527
msgid "was mirrored"
msgstr "a fost oglindit"

#: flatcamTools/ToolDblSided.py:455
msgid "There is no Excellon object loaded ..."
msgstr "Nici-un obiect tip Excellon nu este incărcat ..."

#: flatcamTools/ToolDblSided.py:470
msgid ""
"There are no Point coordinates in the Point field. Add coords and try "
"again ..."
msgstr ""
"Nu există coord. in câmpul 'Punct'. Adaugă coord. și încearcă din nou..."

#: flatcamTools/ToolDblSided.py:499
msgid "There is no Geometry object loaded ..."
msgstr "Nici-un obiect tip Geometrie nu este incărcat ..."

#: flatcamTools/ToolFilm.py:25
msgid "Film PCB"
msgstr "Film PCB"

#: flatcamTools/ToolFilm.py:56 flatcamTools/ToolImage.py:53
#: flatcamTools/ToolPanelize.py:56 flatcamTools/ToolProperties.py:143
msgid "Object Type"
msgstr "Tip Obiect"

#: flatcamTools/ToolFilm.py:58
msgid ""
"Specify the type of object for which to create the film.\n"
"The object can be of type: Gerber or Geometry.\n"
"The selection here decide the type of objects that will be\n"
"in the Film Object combobox."
msgstr ""
"Specificati tipul de obiect pt care se va crea filmul.\n"
"Obiectul poate avea tipul: Gerber sau Geometrie.\n"
"Selectia facuta aici controlează ce obiecte vor fi \n"
"gasite in combobox-ul >Obiect Film<."

#: flatcamTools/ToolFilm.py:71
msgid "Film Object"
msgstr "Obiect Film"

#: flatcamTools/ToolFilm.py:73
msgid "Object for which to create the film."
msgstr "Obiectul pt care se crează filmul."

#: flatcamTools/ToolFilm.py:89
msgid "Box Type:"
msgstr "Tip container:"

#: flatcamTools/ToolFilm.py:91
msgid ""
"Specify the type of object to be used as an container for\n"
"film creation. It can be: Gerber or Geometry type.The selection here decide "
"the type of objects that will be\n"
"in the Box Object combobox."
msgstr ""
"Specificati tipul obiectului care să fie folosit ca și container\n"
"pt crearea filmului. Poate fi de tipul Geometrie sau Gerber.\n"
"Selectia facuta aici controlează ce obiecte vor fi \n"
"gasite in combobox-ul >Container<."

#: flatcamTools/ToolFilm.py:104 flatcamTools/ToolPanelize.py:126
msgid "Box Object"
msgstr "Container"

#: flatcamTools/ToolFilm.py:106
msgid ""
"The actual object that is used a container for the\n"
" selected object for which we create the film.\n"
"Usually it is the PCB outline but it can be also the\n"
"same object for which the film is created."
msgstr ""
"Obiectul care este folosit ca și container pentru crearea filmului.\n"
"De obicei este conturul PCB dar se poate folosi și obiectul pt care\n"
"se crează filmul."

#: flatcamTools/ToolFilm.py:114
msgid "Positive"
msgstr "Pozitiv"

#: flatcamTools/ToolFilm.py:115
msgid "Negative"
msgstr "Negativ"

#: flatcamTools/ToolFilm.py:116
msgid "Film Type:"
msgstr "Tip film:"

#: flatcamTools/ToolFilm.py:157
msgid "Save Film"
msgstr "Salveaa filmul"

#: flatcamTools/ToolFilm.py:159
msgid ""
"Create a Film for the selected object, within\n"
"the specified box. Does not create a new \n"
" FlatCAM object, but directly save it in SVG format\n"
"which can be opened with Inkscape."
msgstr ""
"Crează un film pt obiectul selectat, in cadrul obiectului\n"
"container selectat. Nu crează un obiect nou FlatCAM ci\n"
"salvează pe HDD un fişier in format SVG care poate fi \n"
"deschis și prelucrat mai departe cu Inkscape."

#: flatcamTools/ToolFilm.py:231
msgid "No FlatCAM object selected. Load an object for Film and retry."
msgstr ""
"Nici-un obiect FlaCAM nu este selectat. Incarcă un obiect pt Film și "
"încearcă din nou."

#: flatcamTools/ToolFilm.py:238
msgid "No FlatCAM object selected. Load an object for Box and retry."
msgstr ""
"Nici-un obiect FlatCAM nu este selectat. Încarcă un obiect container și "
"încearcă din nou."

#: flatcamTools/ToolFilm.py:260
msgid "Generating Film ..."
msgstr "Se generează Film-ul ..."

#: flatcamTools/ToolFilm.py:265 flatcamTools/ToolFilm.py:269
msgid "Export SVG positive"
msgstr "Exporta SVG pozitiv"

#: flatcamTools/ToolFilm.py:274
msgid "Export SVG positive cancelled."
msgstr "Exportul unui fişier SVG pozitiv este anulat."

#: flatcamTools/ToolFilm.py:281 flatcamTools/ToolFilm.py:285
msgid "Export SVG negative"
msgstr "Exporta SVG negativ"

#: flatcamTools/ToolFilm.py:290
msgid "Export SVG negative cancelled."
msgstr "Exportul unui fişier SVG negativ este anulat."

#: flatcamTools/ToolImage.py:25
msgid "Image as Object"
msgstr "Imagine ca Obiect"

#: flatcamTools/ToolImage.py:31
msgid "Image to PCB"
msgstr "Imagine -> PCB"

#: flatcamTools/ToolImage.py:55
msgid ""
"Specify the type of object to create from the image.\n"
"It can be of type: Gerber or Geometry."
msgstr ""
"Specifica tipul de obiect care se vrea a fi creat din imagine.\n"
"Tipul sau poate să fie ori Gerber ori Geometrie."

#: flatcamTools/ToolImage.py:63
msgid "DPI value"
msgstr "Val. DPI"

#: flatcamTools/ToolImage.py:65
msgid "Specify a DPI value for the image."
msgstr "Specifica o valoare DPI pt imagine."

#: flatcamTools/ToolImage.py:72
msgid "Level of detail"
msgstr "Nivel Detaliu"

#: flatcamTools/ToolImage.py:81
msgid "Image type"
msgstr "Tip imagine"

#: flatcamTools/ToolImage.py:83
msgid ""
"Choose a method for the image interpretation.\n"
"B/W means a black & white image. Color means a colored image."
msgstr ""
"Alege o metoda de interpretare a imaginii.\n"
"B/W = imagine alb-negru\n"
"Color = imagine in culori"

#: flatcamTools/ToolImage.py:90 flatcamTools/ToolImage.py:103
#: flatcamTools/ToolImage.py:114 flatcamTools/ToolImage.py:125
msgid "Mask value"
msgstr "Val. masca"

#: flatcamTools/ToolImage.py:92
msgid ""
"Mask for monochrome image.\n"
"Takes values between [0 ... 255].\n"
"Decides the level of details to include\n"
"in the resulting geometry.\n"
"0 means no detail and 255 means everything \n"
"(which is totally black)."
msgstr ""
"Masca pt imaginile monocrome.\n"
"Ia valori in intervalul [0 ... 255]\n"
"Decide nivelul de detalii care să fie\n"
"incluse in obiectul rezultat.\n"
"0 = nici-un detaliu\n"
"255 = include totul (ceeace ce inseamna\n"
"negru complet)."

#: flatcamTools/ToolImage.py:105
msgid ""
"Mask for RED color.\n"
"Takes values between [0 ... 255].\n"
"Decides the level of details to include\n"
"in the resulting geometry."
msgstr ""
"Masca pt culoarea ROSU.\n"
"Ia valori in intervalul [0 ... 255].\n"
"Decide nivelul de detalii care să fie\n"
"incluse in obiectul rezultat."

#: flatcamTools/ToolImage.py:116
msgid ""
"Mask for GREEN color.\n"
"Takes values between [0 ... 255].\n"
"Decides the level of details to include\n"
"in the resulting geometry."
msgstr ""
"Masca pt culoarea VERDE.\n"
"Ia valori in intervalul [0 ... 255].\n"
"Decide nivelul de detalii care să fie\n"
"incluse in obiectul rezultat."

#: flatcamTools/ToolImage.py:127
msgid ""
"Mask for BLUE color.\n"
"Takes values between [0 ... 255].\n"
"Decides the level of details to include\n"
"in the resulting geometry."
msgstr ""
"Masca pt culoarea ALBASTRU.\n"
"Ia valori in intervalul [0 ... 255].\n"
"Decide nivelul de detalii care să fie\n"
"incluse in obiectul rezultat."

#: flatcamTools/ToolImage.py:139
msgid "Import image"
msgstr "Importa imagine"

#: flatcamTools/ToolImage.py:141
msgid "Open a image of raster type and then import it in FlatCAM."
msgstr "Deschide o imagine tip raster și importa aceasta in FlatCAM."

#: flatcamTools/ToolImage.py:175
msgid "Image Tool"
msgstr "Unealta Imagine"

#: flatcamTools/ToolImage.py:205 flatcamTools/ToolImage.py:208
msgid "Import IMAGE"
msgstr "Importa Imagine"

#: flatcamTools/ToolMeasurement.py:26
msgid "Measurement"
msgstr "Masuratoare"

#: flatcamTools/ToolMeasurement.py:44
msgid "Those are the units in which the distance is measured."
msgstr "Unitatile de masura in care se masoara distanța."

#: flatcamTools/ToolMeasurement.py:45
msgid "METRIC (mm)"
msgstr "Metric (mm)"

#: flatcamTools/ToolMeasurement.py:45
msgid "INCH (in)"
msgstr "INCH (in)"

#: flatcamTools/ToolMeasurement.py:48
msgid "Start Coords"
msgstr "Coordonate Start"

#: flatcamTools/ToolMeasurement.py:49 flatcamTools/ToolMeasurement.py:65
msgid "This is measuring Start point coordinates."
msgstr "Coordonatele punctului de Start."

#: flatcamTools/ToolMeasurement.py:51
msgid "Stop Coords"
msgstr "Coordonate Stop"

#: flatcamTools/ToolMeasurement.py:52 flatcamTools/ToolMeasurement.py:69
msgid "This is the measuring Stop point coordinates."
msgstr "Coordonatele punctului de Stop."

#: flatcamTools/ToolMeasurement.py:54
msgid "Dx"
msgstr "Dx"

#: flatcamTools/ToolMeasurement.py:55 flatcamTools/ToolMeasurement.py:73
msgid "This is the distance measured over the X axis."
msgstr "Distanta masurata pe axa X."

#: flatcamTools/ToolMeasurement.py:57
msgid "Dy"
msgstr "Dy"

#: flatcamTools/ToolMeasurement.py:58 flatcamTools/ToolMeasurement.py:77
msgid "This is the distance measured over the Y axis."
msgstr "Distanta masurata pe axa Y."

#: flatcamTools/ToolMeasurement.py:60
msgid "DISTANCE"
msgstr "DISTANTA"

#: flatcamTools/ToolMeasurement.py:61 flatcamTools/ToolMeasurement.py:81
msgid "This is the point to point Euclidian distance."
msgstr "Distanta euclidiana de la punct la punct."

#: flatcamTools/ToolMeasurement.py:83
msgid "Measure"
msgstr "Măsoară"

#: flatcamTools/ToolMeasurement.py:135
msgid "Meas. Tool"
msgstr "Unealta Măsur."

#: flatcamTools/ToolMeasurement.py:180
msgid "MEASURING: Click on the Start point ..."
msgstr "Masoara: Click pe punctul de Start ..."

#: flatcamTools/ToolMeasurement.py:312
msgid "MEASURING: Click on the Destination point ..."
msgstr "Masoara: Click pe punctul Destinaţie..."

#: flatcamTools/ToolMeasurement.py:319
#, python-brace-format
msgid "MEASURING: Result D(x) = {d_x} | D(y) = {d_y} | Distance = {d_z}"
msgstr "Masoara: Rrezultat D(x) = {d_x} | D(y) = {d_y} | Distanta = {d_z}"

#: flatcamTools/ToolMove.py:94
msgid "MOVE: Click on the Start point ..."
msgstr "MUTARE: Click pe punctul de Start ..."

#: flatcamTools/ToolMove.py:101
msgid "MOVE action cancelled. No object(s) to move."
msgstr ""
"Actiunea de Mutare a fost anulată. Nu sunt obiecte care să fie mutate ..."

#: flatcamTools/ToolMove.py:128
msgid "MOVE: Click on the Destination point ..."
msgstr "MUTARE: Click pe punctul Destinaţie..."

#: flatcamTools/ToolMove.py:149
msgid "Moving..."
msgstr "In mișcare ..."

#: flatcamTools/ToolMove.py:152
msgid "No object(s) selected."
msgstr "Nici-un obiect nu este selectat."

#: flatcamTools/ToolMove.py:198
msgid "Error when mouse left click."
msgstr "Eroare atunci când faceți clic pe butonul stânga al mouse-ului."

#: flatcamTools/ToolMove.py:246
msgid "Move action cancelled."
msgstr "Actiunea de mutare a fost anulată."

#: flatcamTools/ToolMove.py:258
msgid "Object(s) not selected"
msgstr "Obiect(ele) neselectat(e)"

#: flatcamTools/ToolNonCopperClear.py:26
msgid "Non-Copper Clearing"
msgstr "Curățăre Non-Cu"

#: flatcamTools/ToolNonCopperClear.py:71
msgid ""
"Specify the type of object to be cleared of excess copper.\n"
"It can be of type: Gerber or Geometry.\n"
"What is selected here will dictate the kind\n"
"of objects that will populate the 'Object' combobox."
msgstr ""
"Precizați tipul de obiect care trebuie curățat de excesul de cupru.\n"
"Poate fi de tip: Gerber sau Geometry.\n"
"Ceea ce este selectat aici va dicta genul\n"
"de obiecte care vor popula combobox-ul „Obiect”."

#: flatcamTools/ToolNonCopperClear.py:88
msgid "Object to be cleared of excess copper."
msgstr "Obiect care trebuie curatat de excesul de cupru."

#: flatcamTools/ToolNonCopperClear.py:98
msgid ""
"Tools pool from which the algorithm\n"
"will pick the ones used for copper clearing."
msgstr ""
"Un număr de unelte din care algoritmul va alege\n"
"pe acelea care vor fi folosite pentru curățarea de Cu."

#: flatcamTools/ToolNonCopperClear.py:107
msgid "Operation"
msgstr "Operațiuni"

#: flatcamTools/ToolNonCopperClear.py:113
msgid ""
"This is the Tool Number.\n"
"Non copper clearing will start with the tool with the biggest \n"
"diameter, continuing until there are no more tools.\n"
"Only tools that create NCC clearing geometry will still be present\n"
"in the resulting geometry. This is because with some tools\n"
"this function will not be able to create painting geometry."
msgstr ""
"Numărul uneltei.\n"
"Curățarea de cupru va incepe cu unealta cu diametrul cel mai mare\n"
"continuand ulterior cu cele cu dia mai mic pana numai sunt unelte\n"
"sau s-a terminat procesul.\n"
"Doar uneltele care efectiv au creat geometrie vor fi prezente in obiectul\n"
"final. Aceasta deaorece unele unelte nu vor putea genera geometrie."

#: flatcamTools/ToolNonCopperClear.py:121
msgid ""
"Tool Diameter. It's value (in current FlatCAM units)\n"
"is the cut width into the material."
msgstr ""
"Diametrul uneltei. Valoarea să (in unitati curente FlatCAM)\n"
"reprezintă lăţimea tăieturii in material."

#: flatcamTools/ToolNonCopperClear.py:125
msgid ""
"The Tool Type (TT) can be:\n"
"- Circular with 1 ... 4 teeth -> it is informative only. Being circular,\n"
"the cut width in material is exactly the tool diameter.\n"
"- Ball -> informative only and make reference to the Ball type endmill.\n"
"- V-Shape -> it will disable de Z-Cut parameter in the resulting geometry UI "
"form\n"
"and enable two additional UI form fields in the resulting geometry: V-Tip "
"Dia and\n"
"V-Tip Angle. Adjusting those two values will adjust the Z-Cut parameter "
"such\n"
"as the cut width into material will be equal with the value in the Tool "
"Diameter\n"
"column of this table.\n"
"Choosing the 'V-Shape' Tool Type automatically will select the Operation "
"Type\n"
"in the resulting geometry as Isolation."
msgstr ""
"Tipul de instrument (TT) poate fi:\n"
"- Circular cu 1 ... 4 dinți -> este doar informativ. Fiind circular,\n"
"lățimea tăiată în material este exact diametrul sculei.\n"
"- Ball -> numai informativ și face referire la freza de tip Ball.\n"
"- V-Shape -> va dezactiva parametrul Z-Cut în GUI\n"
"și v-a activa două câmpuri de GUII suplimentare în geometria rezultată: V-"
"Tip Dia și\n"
"V-Tip Angle. Ajustarea celor două valori va ajusta parametrul Z-Cut astfel\n"
"incat lățimea tăiată în material va fi egală cu valoarea din coloana "
"tabelului cu Diametrul sculei.\n"
"Alegerea tipului de instrument „Forma V” va selecta automat tipul de "
"operare\n"
"în geometria rezultată ca fiind Izolare."

#: flatcamTools/ToolNonCopperClear.py:138
msgid ""
"The 'Operation' can be:\n"
"- Isolation -> will ensure that the non-copper clearing is always complete.\n"
"If it's not successful then the non-copper clearing will fail, too.\n"
"- Clear -> the regular non-copper clearing."
msgstr ""
"„Operațiunea” poate fi:\n"
"- Izolare -> se va asigura că curățarea non-cupru este întotdeauna "
"completă.\n"
"Dacă nu are succes, atunci curățarea din cupru nu va reuși.\n"
"- Curățare -> curățarea obișnuită de cupru."

#: flatcamTools/ToolNonCopperClear.py:191
msgid "Tool Selection"
msgstr "Selecţie Unealtă"

#: flatcamTools/ToolNonCopperClear.py:214
msgid "Diameter for the new tool to add in the Tool Table"
msgstr "Diametrul pentru noua unealtă care să fie adăugată in Tabela de Unelte"

#: flatcamTools/ToolNonCopperClear.py:251 flatcamTools/ToolPaint.py:190
#: flatcamTools/ToolSolderPaste.py:123
msgid ""
"Delete a selection of tools in the Tool Table\n"
"by first selecting a row(s) in the Tool Table."
msgstr ""
"Șterge o selecţie de unelte in Tabela de Unelte,\n"
"efectuata prin selectia liniilot din Tabela de Unelte."

#: flatcamTools/ToolNonCopperClear.py:400 flatcamTools/ToolPaint.py:299
msgid "Area Selection"
msgstr "Selecţie zonă"

#: flatcamTools/ToolNonCopperClear.py:401 flatcamTools/ToolPaint.py:301
msgid "Reference Object"
msgstr "Obiect Ref."

#: flatcamTools/ToolNonCopperClear.py:403
msgid "Reference:"
msgstr "Referinţă:"

#: flatcamTools/ToolNonCopperClear.py:418 flatcamTools/ToolPaint.py:316
msgid "Ref. Type"
msgstr "Tip Ref."

#: flatcamTools/ToolNonCopperClear.py:420
msgid ""
"The type of FlatCAM object to be used as non copper clearing reference.\n"
"It can be Gerber, Excellon or Geometry."
msgstr ""
"Tipul de obiect FlatCAM care trebuie utilizat ca referință pt. curățarea de "
"non-cupru.\n"
"Poate fi Gerber, Excellon sau Geometry."

#: flatcamTools/ToolNonCopperClear.py:429 flatcamTools/ToolPaint.py:327
msgid "Ref. Object"
msgstr "Obiect Ref."

#: flatcamTools/ToolNonCopperClear.py:431 flatcamTools/ToolPaint.py:329
msgid "The FlatCAM object to be used as non copper clearing reference."
msgstr ""
"Obiectul FlatCAM pentru a fi utilizat ca referință pt. curățarea de cupru."

#: flatcamTools/ToolNonCopperClear.py:444
msgid "Generate Geometry"
msgstr "Genereza Geometrie"

#: flatcamTools/ToolNonCopperClear.py:921 flatcamTools/ToolPaint.py:719
#: flatcamTools/ToolSolderPaste.py:769
msgid "Please enter a tool diameter to add, in Float format."
msgstr "Introduce diametrul unei unelte pt a fi adăugată, in format Real."

#: flatcamTools/ToolNonCopperClear.py:955 flatcamTools/ToolPaint.py:744
msgid "Adding tool cancelled. Tool already in Tool Table."
msgstr ""
"Adăugarea unei unelte noi este anulată. Unealta există deja in Tabela de "
"Unelte."

#: flatcamTools/ToolNonCopperClear.py:960 flatcamTools/ToolPaint.py:750
msgid "New tool added to Tool Table."
msgstr "O noua unealtă a fost adăugată in Tabela de Unelte."

#: flatcamTools/ToolNonCopperClear.py:1004 flatcamTools/ToolPaint.py:796
msgid "Tool from Tool Table was edited."
msgstr "O unealtă din Tabela de Unelte a fost editata."

#: flatcamTools/ToolNonCopperClear.py:1015 flatcamTools/ToolPaint.py:808
#: flatcamTools/ToolSolderPaste.py:860
msgid "Edit cancelled. New diameter value is already in the Tool Table."
msgstr ""
"Editare eșuată. Noua valoare pt diametrul uneltei este deja in Tabela de "
"Unelte."

#: flatcamTools/ToolNonCopperClear.py:1055 flatcamTools/ToolPaint.py:906
msgid "Delete failed. Select a tool to delete."
msgstr "Ștergere eșuată. Selectează o unealtă pt ștergere."

#: flatcamTools/ToolNonCopperClear.py:1060 flatcamTools/ToolPaint.py:912
msgid "Tool(s) deleted from Tool Table."
msgstr "Au fost șterse unelte din Tabela de Unelte."

#: flatcamTools/ToolNonCopperClear.py:1082
msgid "Overlap value must be between 0 (inclusive) and 1 (exclusive), "
msgstr ""
"Valoarea de suprapunere trebuie sa ia valori intre 0 (inclusiv) si 1 "
"(exclusiv), "

#: flatcamTools/ToolNonCopperClear.py:1118
msgid "Wrong Tool Dia value format entered, use a number."
msgstr "Diametrul uneltei este in format gresit, foloseşte un număr Real."

#: flatcamTools/ToolNonCopperClear.py:1127 flatcamTools/ToolPaint.py:995
msgid "No selected tools in Tool Table."
msgstr "Nu sunt unelte selectate in Tabela de Unelte."

#: flatcamTools/ToolNonCopperClear.py:1152
msgid "Click the start point of the area."
msgstr "Faceți clic pe punctul de pornire al zonei."

#: flatcamTools/ToolNonCopperClear.py:1202 flatcamTools/ToolPaint.py:1105
msgid "Click the end point of the paint area."
msgstr "Faceți clic pe punctul final al zonei de pictat."

#: flatcamTools/ToolNonCopperClear.py:1208 flatcamTools/ToolPaint.py:1111
msgid "Zone added. Click to start adding next zone or right click to finish."
msgstr ""
"Zona adăugată. Faceți clic stanga pt a continua adăugarea de zone sau click "
"dreapta pentru a termina."

#: flatcamTools/ToolNonCopperClear.py:1347
msgid "Non-Copper clearing ..."
msgstr "Curățare Non-Cupru ..."

#: flatcamTools/ToolNonCopperClear.py:1356
msgid "NCC Tool started. Reading parameters."
msgstr "Unealta NCC a pornit. Se citesc parametrii."

#: flatcamTools/ToolNonCopperClear.py:1426
msgid "NCC Tool. Preparing non-copper polygons."
msgstr "Unealta NCC. Se pregătesc poligoanele non-cupru."

#: flatcamTools/ToolNonCopperClear.py:1454 flatcamTools/ToolPaint.py:2504
msgid "No object available."
msgstr "Nici-un obiect disponibil."

#: flatcamTools/ToolNonCopperClear.py:1496
msgid "The reference object type is not supported."
msgstr "Tipul de obiect de referintă nu este acceptat."

#: flatcamTools/ToolNonCopperClear.py:1518
msgid ""
"NCC Tool. Finished non-copper polygons. Normal copper clearing task started."
msgstr ""
"Unelata NCC. S-a terminat pregătirea poligoanelor non-cupru. Taskul de "
"curatare normal de cupru a inceput."

#: flatcamTools/ToolNonCopperClear.py:1550
msgid "NCC Tool. Calculate 'empty' area."
msgstr "Unealta NCC. Calculează aria 'goală'."

#: flatcamTools/ToolNonCopperClear.py:1565
#: flatcamTools/ToolNonCopperClear.py:1659
#: flatcamTools/ToolNonCopperClear.py:1671
#: flatcamTools/ToolNonCopperClear.py:1898
#: flatcamTools/ToolNonCopperClear.py:1990
#: flatcamTools/ToolNonCopperClear.py:2002
msgid "Buffering finished"
msgstr "Buferarea terminată"

#: flatcamTools/ToolNonCopperClear.py:1678
#: flatcamTools/ToolNonCopperClear.py:2008
msgid "The selected object is not suitable for copper clearing."
msgstr "Obiectul selectat nu este potrivit pentru curățarea cuprului."

#: flatcamTools/ToolNonCopperClear.py:1683
#: flatcamTools/ToolNonCopperClear.py:2013
msgid "Could not get the extent of the area to be non copper cleared."
msgstr ""
"Nu s-a putut obtine intinderea suprafaței care să fie curățată de cupru."

#: flatcamTools/ToolNonCopperClear.py:1690
msgid "NCC Tool. Finished calculation of 'empty' area."
msgstr "Unealta NCC. S-a terminat calculul suprafetei 'goale'."

#: flatcamTools/ToolNonCopperClear.py:1700
#: flatcamTools/ToolNonCopperClear.py:2038
msgid "NCC Tool clearing with tool diameter = "
msgstr "Unealta NCC cu diametrul uneltei = "

#: flatcamTools/ToolNonCopperClear.py:1703
#: flatcamTools/ToolNonCopperClear.py:2041
msgid "started."
msgstr "a inceput."

#: flatcamTools/ToolNonCopperClear.py:1841 flatcamTools/ToolPaint.py:1463
#: flatcamTools/ToolPaint.py:1798 flatcamTools/ToolPaint.py:1948
#: flatcamTools/ToolPaint.py:2269 flatcamTools/ToolPaint.py:2423
msgid ""
"There is no Painting Geometry in the file.\n"
"Usually it means that the tool diameter is too big for the painted "
"geometry.\n"
"Change the painting parameters and try again."
msgstr ""
"Nu exista nici-o Geometrie rezultata din 'pictare' in acest fişier.\n"
"De obicei inseamna că diametrul uneltei este prea mare pentru elemetele "
"geometrice.\n"
"Schimbă parametrii de 'pictare' și încearcă din nou."

#: flatcamTools/ToolNonCopperClear.py:1851
msgid "NCC Tool clear all done."
msgstr "Unealta NCC curătare toate efectuată."

#: flatcamTools/ToolNonCopperClear.py:1853
msgid "NCC Tool clear all done but the copper features isolation is broken for"
msgstr ""
"Unealta NCC curătare toate efectuată dar izolatia este intreruptă pentru"

#: flatcamTools/ToolNonCopperClear.py:1856
#: flatcamTools/ToolNonCopperClear.py:2204
msgid "tools"
msgstr "unelte"

#: flatcamTools/ToolNonCopperClear.py:2200
msgid "NCC Tool Rest Machining clear all done."
msgstr "Unealta NCC curătare cu prelucrare tip 'rest' efectuată."

#: flatcamTools/ToolNonCopperClear.py:2203
msgid ""
"NCC Tool Rest Machining clear all done but the copper features isolation is "
"broken for"
msgstr ""
"Unealta NCC curătare toate cu prelucrare tip 'rest' efectuată dar izolatia "
"este intreruptă pentru"

#: flatcamTools/ToolNonCopperClear.py:2630
msgid ""
"Try to use the Buffering Type = Full in Preferences -> Gerber General. "
"Reload the Gerber file after this change."
msgstr ""
"Incearcă să folosesti optiunea Tipul de buffering = Complet in Preferinte -> "
"Gerber General. Reincarcă fisierul Gerber după această schimbare."

#: flatcamTools/ToolPDF.py:152 flatcamTools/ToolPDF.py:156
msgid "Open PDF"
msgstr "Încarcă PDF"

#: flatcamTools/ToolPDF.py:159
msgid "Open PDF cancelled"
msgstr "Deschidere PDF anulată"

#: flatcamTools/ToolPDF.py:190
msgid "Parsing PDF file ..."
msgstr "Se parsează fisierul PDF ..."

#: flatcamTools/ToolPDF.py:273 flatcamTools/ToolPDF.py:348
#, python-format
msgid "Rendering PDF layer #%d ..."
msgstr "Se generează layer-ul PDF #%d ..."

#: flatcamTools/ToolPDF.py:278 flatcamTools/ToolPDF.py:353
msgid "Open PDF file failed."
msgstr "Deschiderea fişierului PDF a eşuat."

#: flatcamTools/ToolPDF.py:284 flatcamTools/ToolPDF.py:358
msgid "Rendered"
msgstr "Randat"

#: flatcamTools/ToolPaint.py:70
msgid ""
"Specify the type of object to be painted.\n"
"It can be of type: Gerber or Geometry.\n"
"What is selected here will dictate the kind\n"
"of objects that will populate the 'Object' combobox."
msgstr ""
"Specificați tipul de obiect care urmează să fie pictat.\n"
"Poate fi de tip: Gerber sau Geometry.\n"
"Ceea ce este selectat aici va dicta genul\n"
"de obiecte care vor popula combobox-ul „Obiect”."

#: flatcamTools/ToolPaint.py:87
msgid "Object to be painted."
msgstr "Obiect care trebuie pictat."

#: flatcamTools/ToolPaint.py:97
msgid ""
"Tools pool from which the algorithm\n"
"will pick the ones used for painting."
msgstr ""
"O suma de unelte din care algoritmul va alege pe acelea\n"
"care vor fi folosite pentru 'pictare'."

#: flatcamTools/ToolPaint.py:112
msgid ""
"This is the Tool Number.\n"
"Painting will start with the tool with the biggest diameter,\n"
"continuing until there are no more tools.\n"
"Only tools that create painting geometry will still be present\n"
"in the resulting geometry. This is because with some tools\n"
"this function will not be able to create painting geometry."
msgstr ""
"Numărul uneltei.\n"
"'Pictarea' va incepe cu unealta cu diametrul cel mai mare\n"
"continuand ulterior cu cele cu dia mai mic pana numai sunt unelte\n"
"sau s-a terminat procesul.\n"
"Doar uneltele care efectiv au creat geometrie vor fi prezente in obiectul\n"
"final. Aceasta deaorece unele unelte nu vor putea genera geometrie."

#: flatcamTools/ToolPaint.py:124
msgid ""
"The Tool Type (TT) can be:<BR>- <B>Circular</B> with 1 ... 4 teeth -> it is "
"informative only. Being circular, <BR>the cut width in material is exactly "
"the tool diameter.<BR>- <B>Ball</B> -> informative only and make reference "
"to the Ball type endmill.<BR>- <B>V-Shape</B> -> it will disable de Z-Cut "
"parameter in the resulting geometry UI form and enable two additional UI "
"form fields in the resulting geometry: V-Tip Dia and V-Tip Angle. Adjusting "
"those two values will adjust the Z-Cut parameter such as the cut width into "
"material will be equal with the value in the Tool Diameter column of this "
"table.<BR>Choosing the <B>V-Shape</B> Tool Type automatically will select "
"the Operation Type in the resulting geometry as Isolation."
msgstr ""
"Tipul uneltei (TU) poate fi::<BR>- <B>Circular</B> cu 1 ... 4 dinti -> doar "
"informativ. prin forma sa circulara, <BR>lăţimea de tăiere este tot una cu "
"diametrul sau<BR>- <B>Bila</B> -> informativ și face referire la frezele cu "
"cap rotund.<BR>- <B>V-Shape</B> -> va dezactiva parametrul >Z tăiere< "
"deoarece acesta este acum calculat și va afisa 2 noi parametri in UI: V_dia "
"și V_unghi. Ajustarea acestor parametri va modifica param. calculat >Z "
"tăiere< a.i lăţimea de tăiere in material va fi egală cu valoarea >Dia "
"unealtă< din coloana tabelei de Unelte.<BR>Alegerea tipului <B>V-Shape</B> "
"va selecta automat Tipul Operaţiei ca fiind Izolare."

#: flatcamTools/ToolPaint.py:164
msgid "Diameter for the new tool."
msgstr "Diametrul pt noua unealtă."

#: flatcamTools/ToolPaint.py:239
msgid ""
"Algorithm for painting:\n"
"- Standard: Fixed step inwards.\n"
"- Seed-based: Outwards from seed.\n"
"- Line-based: Parallel lines."
msgstr ""
"Algoritm pentru pictură:\n"
"- Standard: pas fix spre interior.\n"
"- Semințe: înspre exterior porning de la punctul sămanță.\n"
"- Linii: linii paralele."

#: flatcamTools/ToolPaint.py:273
msgid ""
"If checked, use 'rest machining'.\n"
"Basically it will clear copper outside PCB features,\n"
"using the biggest tool and continue with the next tools,\n"
"from bigger to smaller, to clear areas of copper that\n"
"could not be cleared by previous tool, until there is\n"
"no more copper to clear or there are no more tools.\n"
"\n"
"If not checked, use the standard algorithm."
msgstr ""
"Daca este bifat, foloste 'rest machining'.\n"
"Mai exact, se va curăța cuprul din afara traseelor,\n"
"folosind mai intai unealta cu diametrul cel mai mare\n"
"apoi folosindu-se progresiv unelte cu diametrul tot\n"
"mai mic, din cele disponibile in tabela de unelte, pt a\n"
"curăța zonele care nu s-au putut curăța cu unealta\n"
"precedenta.\n"
"Daca nu este bifat, foloseşte algoritmul standard."

#: flatcamTools/ToolPaint.py:298
msgid "Single Polygon"
msgstr "Poligon unic"

#: flatcamTools/ToolPaint.py:300
msgid "All Polygons"
msgstr "Toate Poligoanele"

#: flatcamTools/ToolPaint.py:318
msgid ""
"The type of FlatCAM object to be used as paint reference.\n"
"It can be Gerber, Excellon or Geometry."
msgstr ""
"Tipul de obiect FlatCAM care trebuie utilizat ca referință pt. pictare.\n"
"Poate fi Gerber, Excellon sau Geometry."

#: flatcamTools/ToolPaint.py:343
msgid "Create Paint Geometry"
msgstr "Crează un obiect Geometrie tip 'Paint'"

#: flatcamTools/ToolPaint.py:345
msgid ""
"- 'Area Selection' - left mouse click to start selection of the area to be "
"painted.\n"
"Keeping a modifier key pressed (CTRL or SHIFT) will allow to add multiple "
"areas.\n"
"- 'All Polygons' - the Paint will start after click.\n"
"- 'Reference Object' -  will do non copper clearing within the area\n"
"specified by another object."
msgstr ""
"- „Selecție zonă” - faceți clic stânga cu mouse-ul pentru a începe selecția "
"zonei care va fi pictată.\n"
"Menținerea unei taste de modificare apăsată (CTRL sau SHIFT) va permite "
"adăugarea mai multor zone.\n"
"- „Toate Poligoanele” - Pictarea va începe după clic.\n"
"- „Obiect de referință” - va face o curățare fără cupru în zona specificată "
"de un alt obiect."

#: flatcamTools/ToolPaint.py:926
msgid "Paint Tool. Reading parameters."
msgstr "Unealta Paint. Se citesc parametrii."

#: flatcamTools/ToolPaint.py:941
msgid "Overlap value must be between 0 (inclusive) and 1 (exclusive)"
msgstr ""
"Valoarea de suprapunere trrebuie sa ia valori intre 0 (inclusiv) si 1 "
"(exclusiv)."

#: flatcamTools/ToolPaint.py:945 flatcamTools/ToolPaint.py:1008
msgid "Click inside the desired polygon."
msgstr "Click in interiorul poligonului care se dorește să fie 'pictat'."

#: flatcamTools/ToolPaint.py:959
#, python-format
msgid "Could not retrieve object: %s"
msgstr "Nu s-a putut incărca obiectul: %s"

#: flatcamTools/ToolPaint.py:973
msgid "Can't do Paint on MultiGeo geometries"
msgstr "Nu se poate face 'pictare' pe geometrii MultiGeo"

#: flatcamTools/ToolPaint.py:1017 flatcamTools/ToolPaint.py:1289
msgid "Painting polygon..."
msgstr "Se 'pictează' un poligon..."

#: flatcamTools/ToolPaint.py:1048
msgid "Click the start point of the paint area."
msgstr "Faceți clic pe punctul de pornire al zonei de pictat."

#: flatcamTools/ToolPaint.py:1245 flatcamTools/ToolPaint.py:1249
#: flatcamTools/ToolPaint.py:1252 flatcamTools/ToolPaint.py:1291
#: flatcamTools/ToolPaint.py:1818 flatcamTools/ToolPaint.py:1822
#: flatcamTools/ToolPaint.py:1825 flatcamTools/ToolPaint.py:2107
#: flatcamTools/ToolPaint.py:2112 flatcamTools/ToolPaint.py:2115
#: flatcamTools/ToolPaint.py:2289 flatcamTools/ToolPaint.py:2296
msgid "Paint Tool."
msgstr "Unealta Paint."

#: flatcamTools/ToolPaint.py:1245 flatcamTools/ToolPaint.py:1249
#: flatcamTools/ToolPaint.py:1252
msgid "Normal painting polygon task started."
msgstr "Taskul de pictare normal a unui polygon a inceput."

#: flatcamTools/ToolPaint.py:1246 flatcamTools/ToolPaint.py:1644
#: flatcamTools/ToolPaint.py:1819 flatcamTools/ToolPaint.py:2109
#: flatcamTools/ToolPaint.py:2291
msgid "Buffering geometry..."
msgstr "Crează o geometrie de tipul Bufer..."

#: flatcamTools/ToolPaint.py:1286
msgid "No polygon found."
msgstr "Nu s-a gasit nici-un poligon."

#: flatcamTools/ToolPaint.py:1291
msgid "Painting polygon at location"
msgstr "Se pictează poligonul aflat in pozitia"

#: flatcamTools/ToolPaint.py:1374
msgid "Geometry could not be painted completely"
msgstr "Geometria nu a fost posibil să fie 'pictată' complet"

#: flatcamTools/ToolPaint.py:1419
msgid ""
"Could not do Paint. Try a different combination of parameters. Or a "
"different strategy of paint"
msgstr ""
"Nu s-a putut face operatia de 'pictare'. Incearcă o combinaţie diferita de "
"parametri. Sau o strategie diferita de 'pictare'"

#: flatcamTools/ToolPaint.py:1468
msgid "Paint Single Done."
msgstr "Pictarea unui polygon efectuată."

#: flatcamTools/ToolPaint.py:1500 flatcamTools/ToolPaint.py:1976
#: flatcamTools/ToolPaint.py:2451
msgid "Polygon Paint started ..."
msgstr "Paint pt poligon a inceput ..."

#: flatcamTools/ToolPaint.py:1561 flatcamTools/ToolPaint.py:2038
msgid "Painting polygons..."
msgstr "Se 'pictează' poligoane..."

#: flatcamTools/ToolPaint.py:1643 flatcamTools/ToolPaint.py:1646
#: flatcamTools/ToolPaint.py:1648
msgid "Paint Tool. Normal painting all task started."
msgstr "Unealta Paint. Taskul de pictare a tuturor poligoanelor a inceput."

#: flatcamTools/ToolPaint.py:1682 flatcamTools/ToolPaint.py:1854
#: flatcamTools/ToolPaint.py:2156 flatcamTools/ToolPaint.py:2332
msgid "Painting with tool diameter = "
msgstr "Pictand cu o unealtă cu diametrul = "

#: flatcamTools/ToolPaint.py:1685 flatcamTools/ToolPaint.py:1857
#: flatcamTools/ToolPaint.py:2159 flatcamTools/ToolPaint.py:2335
msgid "started"
msgstr "a inceput"

#: flatcamTools/ToolPaint.py:1747 flatcamTools/ToolPaint.py:1903
#: flatcamTools/ToolPaint.py:2219 flatcamTools/ToolPaint.py:2379
msgid ""
"Could not do Paint All. Try a different combination of parameters. Or a "
"different Method of paint"
msgstr ""
"Nu s-a efectuat op. 'Paint' pt toate poligoanele. Incearcă o combinaţie "
"diferită de parametri. Sau încearcă o alta metoda de 'pictat'"

#: flatcamTools/ToolPaint.py:1807
msgid "Paint All Done."
msgstr "Pictarea Tuturor poligoanelor efectuată."

#: flatcamTools/ToolPaint.py:1818 flatcamTools/ToolPaint.py:1822
#: flatcamTools/ToolPaint.py:1825
msgid "Rest machining painting all task started."
msgstr ""
"Taskul de pictare prin prelucrare 'rest' a tuturor poligoanelor a inceput."

#: flatcamTools/ToolPaint.py:1957 flatcamTools/ToolPaint.py:2432
msgid "Paint All with Rest-Machining done."
msgstr "'Paint' pentru toate poligoanele cu strategia Rest a fost efectuată."

#: flatcamTools/ToolPaint.py:2108 flatcamTools/ToolPaint.py:2112
#: flatcamTools/ToolPaint.py:2115
msgid "Normal painting area task started."
msgstr "Taskul de pictare normal a unei arii a inceput."

#: flatcamTools/ToolPaint.py:2278
msgid "Paint Area Done."
msgstr "Paint pt o zona efectuata."

#: flatcamTools/ToolPaint.py:2290 flatcamTools/ToolPaint.py:2296
msgid "Rest machining painting area task started."
msgstr ""
"Taskul de pictare a unei arii cu strategia de masinare 'rest' a inceput."

#: flatcamTools/ToolPaint.py:2293
msgid "Paint Tool. Rest machining painting area task started."
msgstr ""
"Unealta Paint. Taskul de pictare a unei arii cu strategia de masinare 'rest' "
"a inceput."

#: flatcamTools/ToolPanelize.py:25
msgid "Panelize PCB"
msgstr "Panelizează PCB"

#: flatcamTools/ToolPanelize.py:58
msgid ""
"Specify the type of object to be panelized\n"
"It can be of type: Gerber, Excellon or Geometry.\n"
"The selection here decide the type of objects that will be\n"
"in the Object combobox."
msgstr ""
"Specifica tipul de obiect care va fi panelizat.\n"
"Poate fi de tipul: Gerber, Excellon sau Geometrie.\n"
"Selectia facuta aici va dicta tipul de obiecte care se vor\n"
"regasi in combobox-ul >Obiect<."

#: flatcamTools/ToolPanelize.py:73
msgid ""
"Object to be panelized. This means that it will\n"
"be duplicated in an array of rows and columns."
msgstr ""
"Obiectul care va fi panelizat.\n"
"Acesta va fi multiplicat intr-o arie\n"
"de linii și coloane."

#: flatcamTools/ToolPanelize.py:86
msgid "Penelization Reference"
msgstr "Referintă panelizare"

#: flatcamTools/ToolPanelize.py:88
msgid ""
"Choose the reference for panelization:\n"
"- Object = the bounding box of a different object\n"
"- Bounding Box = the bounding box of the object to be panelized\n"
"\n"
"The reference is useful when doing panelization for more than one\n"
"object. The spacings (really offsets) will be applied in reference\n"
"to this reference object therefore maintaining the panelized\n"
"objects in sync."
msgstr ""
"Alege referinta pt panelizare:\n"
"- Obiect = forma inconjurătoare a unui alt obiect\n"
"- Forma inconjurătoare = forma inconjurătoare a obiectului care tb "
"panelizat\n"
"\n"
"Referinta este utila cand se face panelizarea pt mai mult de un obiect. "
"Spatierile\n"
"(mai degraba ofsetări) vor fi aplicate avand ca referintă acest obiect de "
"referintă,\n"
"prin urmare mentinand obiectele paenlizate in sincronizare unul cu altul."

#: flatcamTools/ToolPanelize.py:111
msgid "Box Type"
msgstr "Tip container"

#: flatcamTools/ToolPanelize.py:113
msgid ""
"Specify the type of object to be used as an container for\n"
"panelization. It can be: Gerber or Geometry type.\n"
"The selection here decide the type of objects that will be\n"
"in the Box Object combobox."
msgstr ""
"Tipul de obiect care va fi folosit ca și container pt panelizare.\n"
"Poate fi de tiul: Gerber sau Geometrie.\n"
"Selectia facuta aici va dicta tipul de obiecte care se vor\n"
"regasi in combobox-ul >Container<."

#: flatcamTools/ToolPanelize.py:128
msgid ""
"The actual object that is used a container for the\n"
" selected object that is to be panelized."
msgstr ""
"Obiectul care este folosit ca și container \n"
"pt obiectul care va fi panelizat."

#: flatcamTools/ToolPanelize.py:134
msgid "Panel Data"
msgstr "Date panel"

#: flatcamTools/ToolPanelize.py:136
msgid ""
"This informations will shape the resulting panel.\n"
"The number of rows and columns will set how many\n"
"duplicates of the original geometry will be generated.\n"
"\n"
"The spacings will set the distance between any two\n"
"elements of the panel array."
msgstr ""
"Aceste informatii vor determina forma panelului rezultant.\n"
"Numărul de linii si de coloane va determina cat de multe \n"
"copii ale geometriei obiectului original vor fi create.\n"
"\n"
"Spatierile sunt de fapt distante intre oricare două elemente ale \n"
"ariei panelului."

#: flatcamTools/ToolPanelize.py:185
msgid ""
"Choose the type of object for the panel object:\n"
"- Geometry\n"
"- Gerber"
msgstr ""
"Alege tipul de obiect care va fi creat pt obiectul panelizat:\n"
"- Geometrie\n"
"-Gerber"

#: flatcamTools/ToolPanelize.py:193
msgid "Constrain panel within"
msgstr "Mentine panelul in"

#: flatcamTools/ToolPanelize.py:227
msgid "Panelize Object"
msgstr "Panelizează obiectul"

#: flatcamTools/ToolPanelize.py:229
msgid ""
"Panelize the specified object around the specified box.\n"
"In other words it creates multiple copies of the source object,\n"
"arranged in a 2D array of rows and columns."
msgstr ""
"Se panelizează obiectul conform containerului selectat.\n"
"Cu alte cuvinte se crează copii multiple ale obiectului sursa,\n"
"aranjate intr-o arie 2D de linii și coloane."

#: flatcamTools/ToolPanelize.py:277
msgid "Panel. Tool"
msgstr "Unealta Panel"

#: flatcamTools/ToolPanelize.py:465
msgid "Columns or Rows are zero value. Change them to a positive integer."
msgstr ""
"Val. coloane sau linii este zero. Schimbă aceasta val. intr-un număr pozitiv "
"intreg."

#: flatcamTools/ToolPanelize.py:490
msgid "Generating panel ... "
msgstr "Se generează Panel-ul… "

#: flatcamTools/ToolPanelize.py:776
msgid "Generating panel ... Adding the Gerber code."
msgstr "Generarea panelului ... Adăugarea codului Gerber."

#: flatcamTools/ToolPanelize.py:788
msgid "Generating panel... Spawning copies"
msgstr "Generarea panelului ... Se fac copii"

#: flatcamTools/ToolPanelize.py:798
msgid "Panel done..."
msgstr "Panel executat ..."

#: flatcamTools/ToolPanelize.py:801
#, python-brace-format
msgid ""
"{text} Too big for the constrain area. Final panel has {col} columns and "
"{row} rows"
msgstr ""
"{text} Prea mare pt aria desemnată. Panelul final are {col} coloane si {row} "
"linii"

#: flatcamTools/ToolPanelize.py:805
msgid "Working..."
msgstr "Se lucrează..."

#: flatcamTools/ToolPanelize.py:810
msgid "Panel created successfully."
msgstr "Panel creat cu succes."

#: flatcamTools/ToolPcbWizard.py:32
msgid "PcbWizard Import Tool"
msgstr "Unealta import PcbWizard"

#: flatcamTools/ToolPcbWizard.py:40
msgid "Import 2-file Excellon"
msgstr "Importa un Excellon bi-fisier"

#: flatcamTools/ToolPcbWizard.py:51
msgid "Load files"
msgstr "Încărcați fișierele"

#: flatcamTools/ToolPcbWizard.py:57
msgid "Excellon file"
msgstr "Fisier Excellon"

#: flatcamTools/ToolPcbWizard.py:59
msgid ""
"Load the Excellon file.\n"
"Usually it has a .DRL extension"
msgstr ""
"Incarcă fisierul Excellon.\n"
"De obicei are extensia .DRL"

#: flatcamTools/ToolPcbWizard.py:65
msgid "INF file"
msgstr "Fisierul INF"

#: flatcamTools/ToolPcbWizard.py:67
msgid "Load the INF file."
msgstr "Incarca fisierul INF."

#: flatcamTools/ToolPcbWizard.py:79
msgid "Tool Number"
msgstr "Număr unealtă"

#: flatcamTools/ToolPcbWizard.py:81
msgid "Tool diameter in file units."
msgstr "Dimaetrul uneltei in unitătile fisierului."

#: flatcamTools/ToolPcbWizard.py:87
msgid "Excellon format"
msgstr "Format Excellon"

#: flatcamTools/ToolPcbWizard.py:95
msgid "Int. digits"
msgstr "Partea intreagă"

#: flatcamTools/ToolPcbWizard.py:97
msgid "The number of digits for the integral part of the coordinates."
msgstr ""
"Acest număr reprezinta numărul de digiti din partea\n"
"intreagă a coordonatelor."

#: flatcamTools/ToolPcbWizard.py:104
msgid "Frac. digits"
msgstr "Partea zecimală"

#: flatcamTools/ToolPcbWizard.py:106
msgid "The number of digits for the fractional part of the coordinates."
msgstr ""
"Acest număr reprezinta numărul de digiti din partea\n"
"zecimala a coordonatelor."

#: flatcamTools/ToolPcbWizard.py:113
msgid "No Suppression"
msgstr "Fără supresie"

#: flatcamTools/ToolPcbWizard.py:114
msgid "Zeros supp."
msgstr "Supresie Zerouri"

#: flatcamTools/ToolPcbWizard.py:116
msgid ""
"The type of zeros suppression used.\n"
"Can be of type:\n"
"- LZ = leading zeros are kept\n"
"- TZ = trailing zeros are kept\n"
"- No Suppression = no zero suppression"
msgstr ""
"Tipul de supresie de zerouri care\n"
"este folosit.\n"
"Poate fi:\n"
"- LZ = zerourile din fată sunt păstrate\n"
"- TZ = zerourile de la coadă sunt păstrate\n"
"- Fără Supresie = nu se face supresie de zerouri"

#: flatcamTools/ToolPcbWizard.py:129
msgid ""
"The type of units that the coordinates and tool\n"
"diameters are using. Can be INCH or MM."
msgstr ""
"Tipul de unităti folosite pt coordonate si\n"
"pentru diametrul uneltelor. Poate fi INCH sau MM."

#: flatcamTools/ToolPcbWizard.py:136
msgid "Import Excellon"
msgstr "Importă Excellon"

#: flatcamTools/ToolPcbWizard.py:138
msgid ""
"Import in FlatCAM an Excellon file\n"
"that store it's information's in 2 files.\n"
"One usually has .DRL extension while\n"
"the other has .INF extension."
msgstr ""
"Importă in FlatCAM un fisier Excellon\n"
"care isi stochează informatia in 2 fisiere.\n"
"Unul are de obicei extensia .DRL in timp\n"
"ce celălalt are extensia .INF."

#: flatcamTools/ToolPcbWizard.py:197
msgid "PCBWizard Tool"
msgstr "Unealta PCBWizard"

#: flatcamTools/ToolPcbWizard.py:291 flatcamTools/ToolPcbWizard.py:295
msgid "Load PcbWizard Excellon file"
msgstr "Incarcă un fisier Excellon tip PCBWizard"

#: flatcamTools/ToolPcbWizard.py:314 flatcamTools/ToolPcbWizard.py:318
msgid "Load PcbWizard INF file"
msgstr "Incarcă un fisier INF tip PCBWizard"

#: flatcamTools/ToolPcbWizard.py:366
msgid ""
"The INF file does not contain the tool table.\n"
"Try to open the Excellon file from File -> Open -> Excellon\n"
"and edit the drill diameters manually."
msgstr ""
"Fisierul INF nu contine tabela de unelte.\n"
"Incearcă să deschizi fisierul Excellon din Fisier -> Deschide -> \n"
"Excellon si să editezi manual diametrele uneltelor."

#: flatcamTools/ToolPcbWizard.py:387
msgid "PcbWizard .INF file loaded."
msgstr "Fisierul .INF tip PCBWizard a fost incărcat."

#: flatcamTools/ToolPcbWizard.py:392
msgid "Main PcbWizard Excellon file loaded."
msgstr "Fişierul Excellon tip PCBWizard a fost incărcat."

#: flatcamTools/ToolPcbWizard.py:431
msgid "Cannot parse file"
msgstr "Nu se poate parsa fişierul"

#: flatcamTools/ToolPcbWizard.py:456
msgid "Importing Excellon."
msgstr "Excellon in curs de import."

#: flatcamTools/ToolPcbWizard.py:463
msgid "Import Excellon file failed."
msgstr "Fişierul Excellon nu a fost posibil să fie importat."

#: flatcamTools/ToolPcbWizard.py:471
msgid "Imported"
msgstr "Importat"

#: flatcamTools/ToolPcbWizard.py:475
msgid "Excellon merging is in progress. Please wait..."
msgstr "Fuziunea fisiere Excellon este in curs. Vă rugăm aşteptați ..."

#: flatcamTools/ToolPcbWizard.py:478
msgid "The imported Excellon file is None."
msgstr "Fişierul Excellon importat este gol."

#: flatcamTools/ToolProperties.py:112
msgid "Properties Tool was not displayed. No object selected."
msgstr ""
"Unealta Proprietati nu a fost afișată. Nici-un obiect nu este selectat."

#: flatcamTools/ToolProperties.py:120
msgid "Object Properties are displayed."
msgstr "Proprietatile obiectului sunt afisate in Tab-ul Unealta."

#: flatcamTools/ToolProperties.py:121
msgid "Properties Tool"
msgstr "Unealta Proprietati"

#: flatcamTools/ToolProperties.py:130
msgid "TYPE"
msgstr "TIP"

#: flatcamTools/ToolProperties.py:131
msgid "NAME"
msgstr "NUME"

#: flatcamTools/ToolProperties.py:132
msgid "Dimensions"
msgstr "Dimensiuni"

#: flatcamTools/ToolProperties.py:135
msgid "Options"
msgstr "Opțiuni"

#: flatcamTools/ToolProperties.py:146
msgid "Geo Type"
msgstr "Tip Geo."

#: flatcamTools/ToolProperties.py:147
msgid "Single-Geo"
msgstr "Geo-Unică"

#: flatcamTools/ToolProperties.py:147
msgid "Multi-Geo"
msgstr "Geo-Multi"

#: flatcamTools/ToolProperties.py:155
msgid "Calculating dimensions ... Please wait."
msgstr "Se calculează dimensiunile ... Aşteaptă."

#: flatcamTools/ToolProperties.py:246
msgid "Inch"
msgstr "Inch"

#: flatcamTools/ToolProperties.py:247
msgid "Metric"
msgstr "Metric"

#: flatcamTools/ToolProperties.py:298 flatcamTools/ToolProperties.py:312
#: flatcamTools/ToolProperties.py:315 flatcamTools/ToolProperties.py:318
msgid "Present"
msgstr "Prezent"

#: flatcamTools/ToolProperties.py:352
msgid "Width"
msgstr "Lătime"

#: flatcamTools/ToolProperties.py:357 flatcamTools/ToolProperties.py:361
msgid "Box Area"
msgstr "Arie pătratică"

#: flatcamTools/ToolProperties.py:358 flatcamTools/ToolProperties.py:362
msgid "Convex_Hull Area"
msgstr "Arie convexă"

#: flatcamTools/ToolShell.py:70 flatcamTools/ToolShell.py:72
msgid "...proccessing..."
msgstr "...in procesare..."

#: flatcamTools/ToolSolderPaste.py:37
msgid "Solder Paste Tool"
msgstr "Unealta DispensorPF"

#: flatcamTools/ToolSolderPaste.py:65
msgid "Gerber Solder paste object.                        "
msgstr "Obiect Gerber cu masca pt dispensarea de pastă de fludor. "

#: flatcamTools/ToolSolderPaste.py:72
msgid ""
"Tools pool from which the algorithm\n"
"will pick the ones used for dispensing solder paste."
msgstr ""
"Un număr de unelte (nozzle) din care algoritmul va alege pe acelea\n"
"care vor fi folosite pentru dispensarea pastei de fludor."

#: flatcamTools/ToolSolderPaste.py:87
msgid ""
"This is the Tool Number.\n"
"The solder dispensing will start with the tool with the biggest \n"
"diameter, continuing until there are no more Nozzle tools.\n"
"If there are no longer tools but there are still pads not covered\n"
" with solder paste, the app will issue a warning message box."
msgstr ""
"Numărul Uneltei.\n"
"Dispensarea de pastă de fludor va incepe cu unealta care are dia\n"
"cel mai mare și va continua pana numai sunt unelte Nozzle disponibile\n"
"sau procesul s-a terminat.\n"
"Daca numai sunt unelte dar mai sunt inca paduri neacoperite de pastă de \n"
"fludor, aplicaţia va afisa un mesaj de avertizare in Status Bar."

#: flatcamTools/ToolSolderPaste.py:94
msgid ""
"Nozzle tool Diameter. It's value (in current FlatCAM units)\n"
"is the width of the solder paste dispensed."
msgstr ""
"Diametrul uneltei Nozzle. Valoarea sa (in unitati de maura curente)\n"
"este lăţimea cantiatii de pastă de fludor dispensata."

#: flatcamTools/ToolSolderPaste.py:101
msgid "New Nozzle Tool"
msgstr "Unealtă noua"

#: flatcamTools/ToolSolderPaste.py:117
msgid ""
"Add a new nozzle tool to the Tool Table\n"
"with the diameter specified above."
msgstr ""
"Adaugă o unealtă nouă tip Nozzle in Tabela de Unelte\n"
"cu diametrul specificat mai sus."

#: flatcamTools/ToolSolderPaste.py:129
msgid "Generate solder paste dispensing geometry."
msgstr "Generează un obiect Geometrie pt dispensarea de pastă de fludor."

#: flatcamTools/ToolSolderPaste.py:142
msgid "STEP 1"
msgstr "PAS 1"

#: flatcamTools/ToolSolderPaste.py:144
msgid ""
"First step is to select a number of nozzle tools for usage\n"
"and then optionally modify the GCode parameters bellow."
msgstr ""
"Primul pas este să se efectueza o selecţie de unelte Nozzl pt \n"
"utilizare și apoi in mod optional, să se modifice parametrii\n"
"GCode de mai jos."

#: flatcamTools/ToolSolderPaste.py:147
msgid ""
"Select tools.\n"
"Modify parameters."
msgstr ""
"Selectează unelte.\n"
"Modifica parametri."

#: flatcamTools/ToolSolderPaste.py:235
msgid ""
"Feedrate (speed) while moving up vertically\n"
" to Dispense position (on Z plane)."
msgstr ""
"Viteza de deplasare la mișcarea pe verticala spre\n"
"poziţia de dispensare (in planul Z)."

#: flatcamTools/ToolSolderPaste.py:289
msgid "Generate GCode"
msgstr "Genereaa GCode"

#: flatcamTools/ToolSolderPaste.py:291
msgid ""
"Generate GCode for Solder Paste dispensing\n"
"on PCB pads."
msgstr ""
"Generează  GCode pt dispensarea\n"
"de pastă de fludor pe padurile PCB."

#: flatcamTools/ToolSolderPaste.py:306
msgid "STEP 2"
msgstr "PAS 2"

#: flatcamTools/ToolSolderPaste.py:308
msgid ""
"Second step is to create a solder paste dispensing\n"
"geometry out of an Solder Paste Mask Gerber file."
msgstr ""
"Al 2-lea pas este să se creeze un obiect Geometrie pt dispensarea\n"
"de pastă de fludor, dintr-un fişier Gerber cu datele mastii de plasare\n"
"a pastei de fludor."

#: flatcamTools/ToolSolderPaste.py:324
msgid "Geo Result"
msgstr "Rezultat Geo"

#: flatcamTools/ToolSolderPaste.py:326
msgid ""
"Geometry Solder Paste object.\n"
"The name of the object has to end in:\n"
"'_solderpaste' as a protection."
msgstr ""
"Obiect Geometrie pt dispensare pastă de fludor.\n"
"Numele obiectului trebuie să se termine obligatoriu\n"
"in: '_solderpaste'."

#: flatcamTools/ToolSolderPaste.py:335
msgid "STEP 3"
msgstr "PAS 3"

#: flatcamTools/ToolSolderPaste.py:337
msgid ""
"Third step is to select a solder paste dispensing geometry,\n"
"and then generate a CNCJob object.\n"
"\n"
"REMEMBER: if you want to create a CNCJob with new parameters,\n"
"first you need to generate a geometry with those new params,\n"
"and only after that you can generate an updated CNCJob."
msgstr ""
"Al 3-lea pas este selectia unei geometrii de dispensare a pastei de fludor\n"
"urmata de generarea unui obiect tip CNCJob.\n"
"\n"
"ATENTIE: daca se dorește crearea un ui obiect CNCJob cu param. noi,\n"
"mai intai trebuie generat obiectul Geometrie cu acei parametri noi și abia\n"
"apoi se poate genera un obiect CNCJob actualizat."

#: flatcamTools/ToolSolderPaste.py:357
msgid "CNC Result"
msgstr "Rezultat CNC"

#: flatcamTools/ToolSolderPaste.py:359
msgid ""
"CNCJob Solder paste object.\n"
"In order to enable the GCode save section,\n"
"the name of the object has to end in:\n"
"'_solderpaste' as a protection."
msgstr ""
"Obiect CNCJob pt dispensare pastă de fludor.\n"
"Pt a activa sectiunea de Salvare GCode,\n"
"numele obiectului trebuie să se termine obligatoriu in:\n"
"'_solderpaste'."

#: flatcamTools/ToolSolderPaste.py:369
msgid "View GCode"
msgstr "Vizualiz. GCode"

#: flatcamTools/ToolSolderPaste.py:371
msgid ""
"View the generated GCode for Solder Paste dispensing\n"
"on PCB pads."
msgstr ""
"Vizualizează codul GCode generat pt dispensarea de \n"
"pastă de fludor pe padurile PCB-ului."

#: flatcamTools/ToolSolderPaste.py:375
msgid "Save GCode"
msgstr "Salvează GCode"

#: flatcamTools/ToolSolderPaste.py:377
msgid ""
"Save the generated GCode for Solder Paste dispensing\n"
"on PCB pads, to a file."
msgstr ""
"Salvează codul GCode generat pt dispensare pastă de fludor\n"
"pe padurile unui PCB, intr-un fişier pe HDD."

#: flatcamTools/ToolSolderPaste.py:381
msgid "STEP 4"
msgstr "PAS 4"

#: flatcamTools/ToolSolderPaste.py:383
msgid ""
"Fourth step (and last) is to select a CNCJob made from \n"
"a solder paste dispensing geometry, and then view/save it's GCode."
msgstr ""
"Al 4-lea pas (ultimul) este să se selecteze un obiect CNCJob realizat\n"
"dintr-un obiect Geometrie pt dispensarea de pastă de fludor, apoi \n"
"avand posibilitatea de a vizualiza continutul acestuia sau de a-l salva\n"
"intr-un fişier GCode pe HDD."

#: flatcamTools/ToolSolderPaste.py:799
msgid "Adding Nozzle tool cancelled. Tool already in Tool Table."
msgstr ""
"Adăugarea unei unelte Nozzle a fost anulată. Unealta există deja in Tabela "
"de Unelte."

#: flatcamTools/ToolSolderPaste.py:805
msgid "New Nozzle tool added to Tool Table."
msgstr "A fost adăugată o noua unealtă Nozzle in Tabela de Unelte."

#: flatcamTools/ToolSolderPaste.py:848
msgid "Nozzle tool from Tool Table was edited."
msgstr "Unealta Nozzle din Tabela de Unelte a fost editată."

#: flatcamTools/ToolSolderPaste.py:906
msgid "Delete failed. Select a Nozzle tool to delete."
msgstr "Ștergerea a eșuat. Selectează o unealtă Nozzle pt a o șterge."

#: flatcamTools/ToolSolderPaste.py:912
msgid "Nozzle tool(s) deleted from Tool Table."
msgstr "Uneltele (nozzle) au fost șterse din Tabela de Unelte."

#: flatcamTools/ToolSolderPaste.py:968
msgid "No SolderPaste mask Gerber object loaded."
msgstr ""
"Nu este incărcat ni-un obiect Gerber cu informatia măstii pt pasta de fludor."

#: flatcamTools/ToolSolderPaste.py:986
msgid "Creating Solder Paste dispensing geometry."
msgstr "Se creează Geometrie pt dispensare pastă de fludor."

#: flatcamTools/ToolSolderPaste.py:999
msgid "No Nozzle tools in the tool table."
msgstr "Nu sunt unelte Nozzle in Tabela de Unelte."

#: flatcamTools/ToolSolderPaste.py:1126
msgid "Cancelled. Empty file, it has no geometry..."
msgstr "Anulat. Fişier gol, nu are geometrie ..."

#: flatcamTools/ToolSolderPaste.py:1130
msgid "Solder Paste geometry generated successfully"
msgstr ""
"Obiectul Geometrie pt dispens. de pastă de fludor a fost generat cu succes"

#: flatcamTools/ToolSolderPaste.py:1137
msgid "Some or all pads have no solder due of inadequate nozzle diameters..."
msgstr ""
"Cel puțin unele pad-uri nu au pastă de fludor datorita diametrelor uneltelor "
"(nozzle) ne adecvate."

#: flatcamTools/ToolSolderPaste.py:1151
msgid "Generating Solder Paste dispensing geometry..."
msgstr "Se generează Geometria de dispensare a pastei de fludor ..."

#: flatcamTools/ToolSolderPaste.py:1172
msgid "There is no Geometry object available."
msgstr "Nu există obiect Geometrie disponibil."

#: flatcamTools/ToolSolderPaste.py:1177
msgid "This Geometry can't be processed. NOT a solder_paste_tool geometry."
msgstr ""
"Acest obiect Geometrie nu poate fi procesat Nu este o Geometrie tip "
"solder_paste_tool."

#: flatcamTools/ToolSolderPaste.py:1285
msgid "ToolSolderPaste CNCjob created"
msgstr "ToolSolderPaste CNCjob a fost creat"

#: flatcamTools/ToolSolderPaste.py:1318 flatcamTools/ToolSolderPaste.py:1323
#: flatcamTools/ToolSolderPaste.py:1378
msgid ""
"This CNCJob object can't be processed. NOT a solder_paste_tool CNCJob object."
msgstr ""
"Acest obiect CNCJob nu poate fi procesat. Nu este un obiect CNCJob tip "
"'solder_paste_tool'."

#: flatcamTools/ToolSolderPaste.py:1348
msgid "No Gcode in the object"
msgstr "Nu există cod GCode in acest obiect"

#: flatcamTools/ToolSolderPaste.py:1388
msgid "Export GCode ..."
msgstr "Exporta GCode ..."

#: flatcamTools/ToolSolderPaste.py:1436
msgid "Solder paste dispenser GCode file saved to"
msgstr "Fişierul GCode pt dispensare pastă de fludor este salvat in"

#: flatcamTools/ToolSub.py:57
msgid "Gerber Objects"
msgstr "Obiecte Gerber"

#: flatcamTools/ToolSub.py:66 flatcamTools/ToolSub.py:112
msgid "Target"
msgstr "Tintă"

#: flatcamTools/ToolSub.py:68
msgid ""
"Gerber object from which to substract\n"
"the substractor Gerber object."
msgstr ""
"Obiectul Gerber din care se scade \n"
"obiectul Gerber substractor."

#: flatcamTools/ToolSub.py:80 flatcamTools/ToolSub.py:126
msgid "Substractor"
msgstr "Substractor"

#: flatcamTools/ToolSub.py:82
msgid ""
"Gerber object that will be substracted\n"
"from the target Gerber object."
msgstr ""
"Obiectul Gerber care se scade din \n"
"obiectul Gerber tintă."

#: flatcamTools/ToolSub.py:89
msgid "Substract Gerber"
msgstr "Execută"

#: flatcamTools/ToolSub.py:91
msgid ""
"Will remove the area occupied by the substractor\n"
"Gerber from the Target Gerber.\n"
"Can be used to remove the overlapping silkscreen\n"
"over the soldermask."
msgstr ""
"Va indepărta aria ocupată de obiectul \n"
"Gerber substractor din obiectul Gerber tintă.\n"
"Poate fi utilizat pt. a indepărta silkscreen-ul\n"
"care se suprapune peste soldermask."

#: flatcamTools/ToolSub.py:103
msgid "Geometry Objects"
msgstr "Obiecte Geometrie"

#: flatcamTools/ToolSub.py:114
msgid ""
"Geometry object from which to substract\n"
"the substractor Geometry object."
msgstr ""
"Obiectul Geometrie din care se scade \n"
"obiectul Geometrie substractor."

#: flatcamTools/ToolSub.py:128
msgid ""
"Geometry object that will be substracted\n"
"from the target Geometry object."
msgstr ""
"Obiectul Geometrie care se va scădea \n"
"din obiectul Geometrie tintă."

#: flatcamTools/ToolSub.py:139
msgid "Substract Geometry"
msgstr "Execută"

#: flatcamTools/ToolSub.py:141
msgid ""
"Will remove the area occupied by the substractor\n"
"Geometry from the Target Geometry."
msgstr ""
"Va indepărta aria ocupată de obiectul Geometrie \n"
"substractor din obiectul Geometrie tintă."

#: flatcamTools/ToolSub.py:228
msgid "Sub Tool"
msgstr "Unealta Scădere"

#: flatcamTools/ToolSub.py:245 flatcamTools/ToolSub.py:447
msgid "No Target object loaded."
msgstr "Nu este incărcat un obiect Tintă."

#: flatcamTools/ToolSub.py:260 flatcamTools/ToolSub.py:462
msgid "No Substractor object loaded."
msgstr "Nu este incărcat obiect Substractor (scăzător)."

#: flatcamTools/ToolSub.py:314
msgid "Parsing geometry for aperture"
msgstr "Se analizează Geometria pt apertura"

#: flatcamTools/ToolSub.py:416 flatcamTools/ToolSub.py:619
msgid "Generating new object ..."
msgstr "Se generează un obiect nou ..."

#: flatcamTools/ToolSub.py:420 flatcamTools/ToolSub.py:623
#: flatcamTools/ToolSub.py:704
msgid "Generating new object failed."
msgstr "Generarea unui obiect nou a esuat."

#: flatcamTools/ToolSub.py:425 flatcamTools/ToolSub.py:629
msgid "Created"
msgstr "Creat"

#: flatcamTools/ToolSub.py:476
msgid "Currently, the Substractor geometry cannot be of type Multigeo."
msgstr "Momentan, obiectul substractor Geometrie nu poate fi de tip Multigeo."

#: flatcamTools/ToolSub.py:521
msgid "Parsing solid_geometry ..."
msgstr "Analizează geometria solidă..."

#: flatcamTools/ToolSub.py:523
msgid "Parsing solid_geometry for tool"
msgstr "Se analizează Geometria pt unealta"

#: flatcamTools/ToolTransform.py:23
msgid "Object Transform"
msgstr "Transformare Obiect"

#: flatcamTools/ToolTransform.py:84
msgid ""
"Rotate the selected object(s).\n"
"The point of reference is the middle of\n"
"the bounding box for all selected objects."
msgstr ""
"Roteste obiectele selectate.\n"
"Punctul de referinţă este mijlocul \n"
"formei înconjurătoare pt toate obiectele."

#: flatcamTools/ToolTransform.py:120 flatcamTools/ToolTransform.py:138
msgid ""
"Skew/shear the selected object(s).\n"
"The point of reference is the middle of\n"
"the bounding box for all selected objects."
msgstr ""
"Deformează obiectele selectate.\n"
"Punctul de referinţă este mijlocul \n"
"formei înconjurătoare pt toate obiectele."

#: flatcamTools/ToolTransform.py:176 flatcamTools/ToolTransform.py:193
msgid ""
"Scale the selected object(s).\n"
"The point of reference depends on \n"
"the Scale reference checkbox state."
msgstr ""
"Scalează obiectele selectate.\n"
"Punctul de referinţă depinde  de\n"
"starea checkbox-ului >Referința Scalare<."

#: flatcamTools/ToolTransform.py:251 flatcamTools/ToolTransform.py:268
msgid ""
"Offset the selected object(s).\n"
"The point of reference is the middle of\n"
"the bounding box for all selected objects.\n"
msgstr ""
"Deplasează obiectele selectate.\n"
"Punctul de referinţă este mijlocul formei înconjurătoare\n"
"pentru toate obiectele selectate.\n"

#: flatcamTools/ToolTransform.py:298 flatcamTools/ToolTransform.py:306
msgid ""
"Flip the selected object(s) over the X axis.\n"
"Does not create a new object.\n"
" "
msgstr ""
"Oglindește obiectele selectate pe axa X.\n"
"Nu crează un obiect nou.\n"
" "

#: flatcamTools/ToolTransform.py:643
msgid "No object selected. Please Select an object to rotate!"
msgstr ""
"Nici-un obiect nu este selectat. Selectează un obiect pentru a fi Rotit!"

#: flatcamTools/ToolTransform.py:671
msgid "CNCJob objects can't be rotated."
msgstr "Obiectele tip CNCJob nu pot fi Rotite."

#: flatcamTools/ToolTransform.py:679
msgid "Rotate done"
msgstr "Rotaţie efectuată"

#: flatcamTools/ToolTransform.py:684 flatcamTools/ToolTransform.py:759
#: flatcamTools/ToolTransform.py:809 flatcamTools/ToolTransform.py:868
#: flatcamTools/ToolTransform.py:904
msgid "Due of"
msgstr "Datorită"

#: flatcamTools/ToolTransform.py:684 flatcamTools/ToolTransform.py:759
#: flatcamTools/ToolTransform.py:809 flatcamTools/ToolTransform.py:868
#: flatcamTools/ToolTransform.py:904
msgid "action was not executed."
msgstr "actiunea nu a fost efectuată."

#: flatcamTools/ToolTransform.py:696
msgid "No object selected. Please Select an object to flip"
msgstr ""
"Nici-un obiect nu este selectat. Selectează un obiect pentru a fi Oglindit"

#: flatcamTools/ToolTransform.py:731
msgid "CNCJob objects can't be mirrored/flipped."
msgstr "Obiectele tip CNCJob nu pot fi Oglindite."

#: flatcamTools/ToolTransform.py:769
msgid "No object selected. Please Select an object to shear/skew!"
msgstr ""
"Nici-un obiect nu este selectat. Selectează un obiect pentru a fi Deformat!"

#: flatcamTools/ToolTransform.py:791
msgid "CNCJob objects can't be skewed."
msgstr "Obiectele tip CNCJob nu pot fi deformate."

#: flatcamTools/ToolTransform.py:804
msgid "Skew on the"
msgstr "Deformează pe"

#: flatcamTools/ToolTransform.py:804 flatcamTools/ToolTransform.py:864
#: flatcamTools/ToolTransform.py:899
msgid "axis done"
msgstr "axa efectuată"

#: flatcamTools/ToolTransform.py:821
msgid "No object selected. Please Select an object to scale!"
msgstr ""
"Nici-un obiect nu este selectat. Selectează un obiect pentru a fi Scalat!"

#: flatcamTools/ToolTransform.py:854
msgid "CNCJob objects can't be scaled."
msgstr "Obiectele tip CNCJob nu pot fi scalate."

#: flatcamTools/ToolTransform.py:864
msgid "Scale on the"
msgstr "Scalează pe"

#: flatcamTools/ToolTransform.py:876
msgid "No object selected. Please Select an object to offset!"
msgstr ""
"Nici-un obiect nu este selectat. Selectează un obiect pentru a fi Ofsetat!"

#: flatcamTools/ToolTransform.py:885
msgid "CNCJob objects can't be offset."
msgstr "Obiectele tip CNCJob nu pot fi deplasate."

#: flatcamTools/ToolTransform.py:899
msgid "Offset on the"
msgstr "Ofset pe"

#: tclCommands/TclCommandBbox.py:70 tclCommands/TclCommandNregions.py:68
msgid "Expected FlatCAMGerber or FlatCAMGeometry, got"
msgstr "Se astepta un obiect FlatCAMGerber sau FlatCAMGeometry, s-a primit"

#: tclCommands/TclCommandBounds.py:64 tclCommands/TclCommandBounds.py:68
msgid "Expected a list of objects names separated by comma. Got"
msgstr ""
"Se aștepta o listă de nume de obiecte separate prin virgulă. S-au primit"

#: tclCommands/TclCommandBounds.py:79
msgid "TclCommand Bounds done."
msgstr "TclCommand Bounds executata."

#: tclCommands/TclCommandCopperClear.py:237 tclCommands/TclCommandPaint.py:235
msgid "Expected -box <value>."
msgstr "Asteptăm -box <value>."

#: tclCommands/TclCommandCopperClear.py:246 tclCommands/TclCommandPaint.py:244
#: tclCommands/TclCommandScale.py:63
msgid "Could not retrieve box object"
msgstr "Nu s-a putut incărca obiectul"

#: tclCommands/TclCommandCopperClear.py:268
msgid ""
"None of the following args: 'ref', 'all' were found or none was set to 1.\n"
"Copper clearing failed."
msgstr ""
"Niciunul din următoarele argumente: „ref”, „toate” nu au fost găsite sau "
"nici unul nu a fost setat la 1.\n"
"Curatarea de cupru a eșuat."

#: tclCommands/TclCommandPaint.py:212
msgid "Expected -x <value> and -y <value>."
msgstr "Asteptam -x <value> si -y <value>."

#: tclCommands/TclCommandPaint.py:263
msgid ""
"There was none of the following args: 'ref', 'single', 'all'.\n"
"Paint failed."
msgstr ""
"Nu a existat niciunul din următoarele argumente: „ref”, „single”, „all”.\n"
"Pictura nu a reușit."

#: tclCommands/TclCommandScale.py:83
msgid "Expected -origin <origin> or -origin <min_bounds> or -origin <center>."
msgstr ""
"Asteptam -origin <origin> sau -origin <min_bounds> sau -origin <center>."

#: tclCommands/TclCommandScale.py:92
msgid "Expected -x <value> -y <value>."
msgstr "Asteptam -x <value> -y <value>."

#: tclCommands/TclCommandSetOrigin.py:80
msgid "Expected a pair of (x, y) coordinates. Got"
msgstr "Se așteaptă o pereche de coordonate (x, y). S-au primit"

#: tclCommands/TclCommandSetOrigin.py:87
msgid "Origin set by offsetting all loaded objects with "
msgstr "Originea setată prin ofsetarea tuturor obiectelor încărcate cu "

#: tclCommands/TclCommandSubtractRectangle.py:49
msgid "No Geometry name in args. Provide a name and try again."
msgstr ""
"Nici-un nume de Geometrie in argumente. Furnizați un nume și încercați din "
"nou."

#~ msgid "Not available with the current Graphic Engine Legacy(2D)."
#~ msgstr "Indisponibil pentru motorul grafic current (2D)."

#~ msgid "ToolMove.on_left_click()"
#~ msgstr "ToolMove.on_left_click()"

#~ msgid "on_paint_button_click"
#~ msgstr "on_paint_button_click"

#~ msgid "PaintTool.paint_poly()"
#~ msgstr "PaintTool.paint_poly()"

#~ msgid "ToolSolderPaste.on_view_gcode()"
#~ msgstr "ToolSolderPaste.on_view_gcode()"

#~ msgid "App.on_fileopenscript() -->"
#~ msgstr "App.on_fileopenscript() -->"

#~ msgid "<span style=\"color:green;\"><b>%s</b></span>"
#~ msgstr "<span style=\"color:green;\"><b>%s</b></span>"

#~ msgid "<span style=\"color:red;\"><b>%s</b></span>"
#~ msgstr "<span style=\"color:red;\"><b>%s</b></span>"

#~ msgid "FlatCAMObj.FlatCAMGeometry.mtool_gen_cncjob() -->"
#~ msgstr "FlatCAMObj.FlatCAMGeometry.mtool_gen_cncjob() -->"

#~ msgid "FlatCAMCNNJob.on_edit_code_click() -->"
#~ msgstr "FlatCAMCNNJob.on_edit_code_click() -->"

#~ msgid ""
#~ "toolbars, key shortcuts or even dragging and dropping the files on the GUI"
#~ msgstr ""
#~ "toolbaruri, taste shortcut sau chiar drag - drop a fisierelor in GUI"

#~ msgid ""
#~ "You can also load a FlatCAM project by double clicking on the project "
#~ "file, drag"
#~ msgstr ""
#~ "Se poate incarca un proiect FlatCAM si prin dublu-click pe fisierul "
#~ "proiect, drag -"

#~ msgid ""
#~ "Once an object is available in the Project Tab, by selecting it and then "
#~ "focusing on"
#~ msgstr ""
#~ "Odata ce obiectul este disponibil in Tab-ul Proiect, prin selectarea si "
#~ "apoi focalizarea pe"

#~ msgid "SELECTED TAB"
#~ msgstr "TAB-ul SELECTAT"

#~ msgid "more simpler is to double click the object name in the Project Tab"
#~ msgstr ""
#~ "mai simplu este sa se faca dublu click pe numele obiectului in Tab-ul "
#~ "Proiect"

#~ msgid "will be updated with the object properties according to"
#~ msgstr "va fi actualizat cu proprietatile obiectului conform cu"

#~ msgid "kind: Gerber, Excellon, Geometry or CNCJob object"
#~ msgstr "tip: obiect Gerber, Excellon, Geometrie sau CNCJob"

#~ msgid ""
#~ "If the selection of the object is done on the canvas by single click "
#~ "instead, and the"
#~ msgstr ""
#~ "Daca selectia obiectului este efectuata pe canvas prin simplu click, si"

#~ msgid "and populate it even if it was out of focus"
#~ msgstr "si il va popula chiar daca a fost nefocalizat"

#~ msgid "Gerber/Excellon Object"
#~ msgstr "Obiect Gerber/Excellon"

#~ msgid "Change Parameter"
#~ msgstr "Schimba Parametri"

#~ msgid "Add tools (change param in Selected Tab)"
#~ msgstr "Adauga unelte (schimba parametrul in Tab-ul Selectat)"

#~ msgid "Generate CNCJob"
#~ msgstr "Generează CNCJob"

#~ msgid "CNCJob Object"
#~ msgstr "Obiect CNCJob"

#~ msgid ""
#~ "Verify GCode (through Edit CNC Code) and/or append/prepend to GCode "
#~ "(again, done in"
#~ msgstr ""
#~ "Verifica GCode (cu ajutorul Editorului) si/sau adauga la GCode (din nou, "
#~ "efectuat in"

#~ msgid "Help"
#~ msgstr "Ajutor"

#~ msgid "Shortcuts List"
#~ msgstr "Lista shortcut-uri"

#~ msgid "or through"
#~ msgstr "sau prin"

#~ msgid "own key shortcut"
#~ msgstr "propria tasta shortcut"

#~ msgid "polygons"
#~ msgstr "poligoane"

#~ msgid "geo"
#~ msgstr "geo"

#~ msgid "Start"
#~ msgstr "Start"

#~ msgid "Stop"
#~ msgstr "Stop"

#~ msgid "Generating panel ..."
#~ msgstr "Se generează Panel-ul..."

#~ msgid "Spawning copies"
#~ msgstr "Genereaza copii noi"

#~ msgid "Parsing tool"
#~ msgstr "Analizează unealta"

#~ msgid ""
#~ " Wrong value format for self.defaults[\"feedrate_probe\"] or self."
#~ "options[\"feedrate_probe\"]"
#~ msgstr ""
#~ " Valoare gresita pt self.defaults[\"feedrate_probe\"] sau self."
#~ "options[\"feedrate_probe\"]"

#~ msgid "Wrong optimization type selected."
#~ msgstr "Un tip de optimizare incorrect a fost selectat."

#~ msgid "FILE ASSOCIATIONS"
#~ msgstr "ASOCIERI FISIERE"

#~ msgid "Advanced Param."
#~ msgstr "Param. Avansați"

#~ msgid "MH"
#~ msgstr "MH"

#~ msgid "Feedrate (Plunge)"
#~ msgstr "Feedrate (Plonjare)"

#~ msgid ""
#~ "Parameters used to create a CNC Job object\n"
#~ "for this drill object that are shown when App Level is Advanced."
#~ msgstr ""
#~ "Parametri folositi pentru a crea un obiect CNCJob\n"
#~ "pt acest obiect Excellon, parametri care sunt disponibili\n"
#~ "doar in modul Avansat al aplicaţiei."

#~ msgid ""
#~ "Parameters to create a CNC Job object\n"
#~ "tracing the contours of a Geometry object."
#~ msgstr ""
#~ "Parametrii folositi pentru a crea un obiect CNCJob,\n"
#~ "urmărind contururile unui obiect tip Geometrie."

#~ msgid "Manufacturing"
#~ msgstr "Productie"

#~ msgid "Function"
#~ msgstr "Functie"

#~ msgid ""
#~ "\n"
#~ "<p><span style=\"font-size:{tsize}px\"><strong>Selected Tab - Choose an "
#~ "Item from Project Tab</strong></span></p>\n"
#~ "\n"
#~ "<p><span style=\"font-size:{fsize}px\"><strong>Details</strong>:<br />\n"
#~ "The normal flow when working in FlatCAM is the following:</span></p>\n"
#~ "\n"
#~ "<ol>\n"
#~ "\t<li><span style=\"font-size:{fsize}px\">Loat/Import a Gerber, Excellon, "
#~ "Gcode, DXF, Raster Image or SVG file into FlatCAM using either the "
#~ "menu&#39;s, toolbars, key shortcuts or even dragging and dropping the "
#~ "files on the GUI.<br />\n"
#~ "\t<br />\n"
#~ "\tYou can also load a <strong>FlatCAM project</strong> by double clicking "
#~ "on the project file, drag &amp; drop of the file into the FLATCAM GUI or "
#~ "through the menu/toolbar links offered within the app.</span><br />\n"
#~ "\t&nbsp;</li>\n"
#~ "\t<li><span style=\"font-size:{fsize}px\">Once an object is available in "
#~ "the Project Tab, by selecting it and then focusing on <strong>SELECTED "
#~ "TAB </strong>(more simpler is to double click the object name in the "
#~ "Project Tab), <strong>SELECTED TAB </strong>will be updated with the "
#~ "object properties according to it&#39;s kind: Gerber, Excellon, Geometry "
#~ "or CNCJob object.<br />\n"
#~ "\t<br />\n"
#~ "\tIf the selection of the object is done on the canvas by single click "
#~ "instead, and the <strong>SELECTED TAB</strong> is in focus, again the "
#~ "object properties will be displayed into the Selected Tab. Alternatively, "
#~ "double clicking on the object on the canvas will bring the "
#~ "<strong>SELECTED TAB</strong> and populate it even if it was out of focus."
#~ "<br />\n"
#~ "\t<br />\n"
#~ "\tYou can change the parameters in this screen and the flow direction is "
#~ "like this:<br />\n"
#~ "\t<br />\n"
#~ "\t<strong>Gerber/Excellon Object</strong> -&gt; Change Param -&gt; "
#~ "Generate Geometry -&gt;<strong> Geometry Object </strong>-&gt; Add tools "
#~ "(change param in Selected Tab) -&gt; Generate CNCJob -&gt;<strong> CNCJob "
#~ "Object </strong>-&gt; Verify GCode (through Edit CNC Code) and/or append/"
#~ "prepend to GCode (again, done in <strong>SELECTED TAB)&nbsp;</strong>-"
#~ "&gt; Save GCode</span></li>\n"
#~ "</ol>\n"
#~ "\n"
#~ "<p><span style=\"font-size:{fsize}px\">A list of key shortcuts is "
#~ "available through an menu entry in <strong>Help -&gt; Shortcuts List</"
#~ "strong>&nbsp;or through it&#39;s own key shortcut: <strong>F3</strong>.</"
#~ "span></p>\n"
#~ "\n"
#~ "        "
#~ msgstr ""
#~ "\n"
#~ "<p><span style=\"font-size:{tsize}\"><strong>Tab Selectat - Alege o "
#~ "intrare din Tab-ul Proiect</strong></span></p>\n"
#~ "\n"
#~ "<p><span style=\"font-size:{fsize}\"><strong>Detalii</strong>:<br />\n"
#~ "Fluxul normal când se lucrează in FlatCAM este următorul:</span></p>\n"
#~ "\n"
#~ "<ol>\n"
#~ "\t<li><span style=\"font-size:{fsize}\">Încarcă/Importa un fişier Gerber, "
#~ "Excellon, Gcode, DXF, Imagine Raster sau SVG in FlatCAM folosind ori "
#~ "meniurile, toolbarurile, tastele shortcut sau chiar tragerea și "
#~ "eliberarea fişierelor in fereastra FlatCAM.<br />\n"
#~ "\t<br />\n"
#~ "\tPoti să incarci și un <strong>proiect FlatCAM</strong> prin dublu click "
#~ "pe fişierul proiect, tragerea și eliberarea fişierului peste FLATCAM GUI "
#~ "sau prin sistemul de meniuri/toolbaruri oferit in cadrul aplicaţiei.</"
#~ "span><br />\n"
#~ "\t&nbsp;</li>\n"
#~ "\t<li><span style=\"font-size:{fsize}\">Odata ce un obiect este "
#~ "disponibil in Tab-ul Proiect, prin selectarea și focalizarea in "
#~ "<strong>Tab-ul SELECTAT</strong>(mai simplu prin dublu click pe numele "
#~ "obiectului in lista dinTab-ul Proiect), <strong>Tab-ul SELECTAT </"
#~ "strong>va fi updatat conform cu tipul sau: Gerber, Excellon, Geometrie "
#~ "sau CNCJob.<br />\n"
#~ "\t<br />\n"
#~ "\tDaca selectia este efectuata pe Canvas prin simplu click și <strong>Tab-"
#~ "ul SELECTAT</strong> este in focus, din nou, proprietatile obiectului vor "
#~ "fi afisate in Tab-ul SELECTAT. Alternativ, prin dublu click pe obiect in "
#~ "Canvas se va aduce <strong>Tab-ul SELECTAT</strong> in focus și va fi "
#~ "actualizat cu informaţie chair daca initial nu era focalizat.<br />\n"
#~ "\t<br />\n"
#~ "\tO suma de parametri se pot schimba in acest Tab and directia in lucru "
#~ "este urmatoarea:<br />\n"
#~ "\t<br />\n"
#~ "\t<strong>Obiectul Gerber/Excellon</strong> -&gt; Schimba Parametru -&gt; "
#~ "Generează Geometrie -&gt;<strong>Obiectul Geometrie </strong>-&gt; Adaugă "
#~ "unelte (prin schimbare parametru in Tab-ul SELECTAT) -&gt; Generează "
#~ "CNCJob -&gt;<strong> Obiect CNCJob</strong>-&gt; Verifică GCode (folosind "
#~ "Editare cod CNC) și/sau Adaugă cod GCode la inceput/la sfârşit (din nou, "
#~ "efectuat in <strong>Tab-ul SELECTAT)&nbsp;</strong>-&gt; Salvează GCode</"
#~ "span></li>\n"
#~ "</ol>\n"
#~ "\n"
#~ "<p><span style=\"font-size:{fsize}\">O lista cu tastele shortcut este "
#~ "disponibila ca și meniu  in <strong>Help -&gt;Lista Shortcut-uri</"
#~ "strong>&nbsp;sau prin propria tasta shortcutt: <strong>F3</strong>.</"
#~ "span></p>\n"
#~ "\n"
#~ "        "

#~ msgid "Run Script ...\tSHIFT+S"
#~ msgstr "Rulează Script ...\tSHIFT+S"

#~ msgid ""
#~ "<font size=8><B>FlatCAM</B></font><BR>Version {version} {beta} ({date}) - "
#~ "{arch} <BR><BR>2D Computer-Aided Printed Circuit Board<BR>Manufacturing."
#~ "<BR><BR><B> License: </B><BR>Licensed under MIT license (2014 - "
#~ "2019)<BR>by (c)Juan Pablo Caram <BR><BR><B> Programmers:</B><BR>Denis "
#~ "Hayrullin<BR>Kamil Sopko<BR>Marius Stanciu<BR>Matthieu Berthomé<BR>and "
#~ "many others found <a href = \"https://bitbucket.org/jpcgt/flatcam/pull-"
#~ "requests/?state=MERGED\">here.</a><BR><BR><B>Development</B> is done <a "
#~ "href = \"https://bitbucket.org/jpcgt/flatcam/src/Beta/\">here.</"
#~ "a><BR><b>DOWNLOAD</B> area <a href = \"https://bitbucket.org/jpcgt/"
#~ "flatcam/downloads/\">here.</a><BR>"
#~ msgstr ""
#~ "<font size=8><B>FlatCAM </B></font><BR> Versiunea {version} {beta} "
#~ "({date}) - {arch} <BR><BR> Fabricare de Plăci de circuit imprimat "
#~ "asistată de<BR> procesare PC 2D. <BR><BR><B>Licență: </B><BR>Licențiat "
#~ "sub licență MIT (2014 - 2019)<BR>de (c) Juan Pablo Caram<BR><BR><B "
#~ ">Programatori:</B><BR>Denis Hayrullin<BR>Kamil Sopko<BR>Marius "
#~ "Stanciu<BR>Matthieu Berthomé<BR>și mulți alții pot fi găsiti <a href="
#~ "\"https://bitbucket.org/jpcgt/flatcam/pull-Request/?state=MERGED \">aici. "
#~ "</a><BR><BR><B>Dezvoltarea</B>se face <a href=\" https://bitbucket.org/"
#~ "jpcgt/flatcam/src/Beta / \">aici.</a><BR><b>DOWLOAD</B>:<a href=\"https://"
#~ "bitbucket.org/jpcgt/flatcam/downloads/\">aici.</a><BR>"

#~ msgid "Expected a FlatCAMGeometry, got %s"
#~ msgstr "Se astepta o Geometrie FlatCAM, s-a primit %s"

#~ msgid "Saved to: %s"
#~ msgstr "Salvat in: %s"

#~ msgid "[WARNING_NOTCL] Adding Tool cancelled ..."
#~ msgstr "[WARNING_NOTCL] Adăugarea unei unelte anulată ..."

#~ msgid "%s"
#~ msgstr "%s"

#~| msgid "[ERROR]App.on_view_source() -->%s"
#~ msgid "App.on_view_source() -->"
#~ msgstr "App.on_view_source() -->"

#~ msgid "[success] Name changed from {old} to {new}"
#~ msgstr "[success] Numele schimbat din {old} in {new}"

#~| msgid ""
#~| "[ERROR_NOTCL] Failed.\n"
#~| "%s"
#~ msgid "[ERROR_NOTCL] %s"
#~ msgstr "[ERROR_NOTCL] %s"

#~ msgid "Editor %s"
#~ msgstr "Editor %s"

#~ msgid "[success] Done. Path completed."
#~ msgstr "[success] Executata. Adăugarea unei forme tip Cale terminată."

#~ msgid "[success] Paint done."
#~ msgstr "[success] Paint executat."

#~ msgid "About"
#~ msgstr "Despre"

#~ msgid ""
#~ "<b>General Shortcut list</b><br>\n"
#~ "            <table border=\"0\" cellpadding=\"0\" cellspacing=\"0\" style="
#~ "\"width:283px\">\n"
#~ "                <tbody>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\" width=\"89\"><strong>F3</"
#~ "strong></td>\n"
#~ "                        <td width=\"194\"><span style=\"color:"
#~ "#006400\"><strong>&nbsp;SHOW SHORTCUT LIST</strong></span></td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>1</strong></td>\n"
#~ "                        <td>&nbsp;Switch to Project Tab</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>2</strong></td>\n"
#~ "                        <td>&nbsp;Switch to Selected Tab</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>3</strong></td>\n"
#~ "                        <td>&nbsp;Switch to Tool Tab</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>B</strong></td>\n"
#~ "                        <td>&nbsp;New Gerber</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>E</strong></td>\n"
#~ "                        <td>&nbsp;Edit Object (if selected)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>G</strong></td>\n"
#~ "                        <td>&nbsp;Grid On/Off</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>J</strong></td>\n"
#~ "                        <td>&nbsp;Jump to Coordinates</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>L</strong></td>\n"
#~ "                        <td>&nbsp;New Excellon</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>M</strong></td>\n"
#~ "                        <td>&nbsp;Move Obj</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>N</strong></td>\n"
#~ "                        <td>&nbsp;New Geometry</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>O</strong></td>\n"
#~ "                        <td>&nbsp;Set Origin</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Q</strong></td>\n"
#~ "                        <td>&nbsp;Change Units</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>P</strong></td>\n"
#~ "                        <td>&nbsp;Open Properties Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>R</strong></td>\n"
#~ "                        <td>&nbsp;Rotate by 90 degree CW</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>S</strong></td>\n"
#~ "                        <td>&nbsp;Shell Toggle</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>T</strong></td>\n"
#~ "                        <td>&nbsp;Add a Tool (when in Geometry Selected "
#~ "Tab or in Tools NCC or Tools Paint)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>V</strong></td>\n"
#~ "                        <td>&nbsp;Zoom Fit</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>X</strong></td>\n"
#~ "                        <td>&nbsp;Flip on X_axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Y</strong></td>\n"
#~ "                        <td>&nbsp;Flip on Y_axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>&#39;-&#39;</strong></"
#~ "td>\n"
#~ "                        <td>&nbsp;Zoom Out</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>&#39;=&#39;</strong></"
#~ "td>\n"
#~ "                        <td>&nbsp;Zoom In</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>CTRL+A</strong></td>\n"
#~ "                        <td>&nbsp;Select All</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>CTRL+C</strong></td>\n"
#~ "                        <td>&nbsp;Copy Obj</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>CTRL+E</strong></td>\n"
#~ "                        <td>&nbsp;Open Excellon File</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>CTRL+G</strong></td>\n"
#~ "                        <td>&nbsp;Open Gerber File</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>CTRL+N</strong></td>\n"
#~ "                        <td>&nbsp;New Project</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>CTRL+M</strong></td>\n"
#~ "                        <td>&nbsp;Measurement Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>CTRL+O</strong></td>\n"
#~ "                        <td>&nbsp;Open Project</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>CTRL+S</strong></td>\n"
#~ "                        <td>&nbsp;Save Project As</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>CTRL+F10</strong></td>\n"
#~ "                        <td>&nbsp;Toggle Plot Area</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>SHIFT+C</strong></td>\n"
#~ "                        <td>&nbsp;Copy Obj_Name</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>SHIFT+E</strong></td>\n"
#~ "                        <td>&nbsp;Toggle Code Editor</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>SHIFT+G</strong></td>\n"
#~ "                        <td>&nbsp;Toggle the axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>SHIFT+P</strong></td>\n"
#~ "                        <td>&nbsp;Open Preferences Window</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>SHIFT+R</strong></td>\n"
#~ "                        <td>&nbsp;Rotate by 90 degree CCW</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>SHIFT+S</strong></td>\n"
#~ "                        <td>&nbsp;Run a Script</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>SHIFT+W</strong></td>\n"
#~ "                        <td>&nbsp;Toggle the workspace</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>SHIFT+X</strong></td>\n"
#~ "                        <td>&nbsp;Skew on X axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>SHIFT+Y</strong></td>\n"
#~ "                        <td>&nbsp;Skew on Y axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+C</strong></td>\n"
#~ "                        <td>&nbsp;Calculators Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+D</strong></td>\n"
#~ "                        <td>&nbsp;2-Sided PCB Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+K</strong></td>\n"
#~ "                        <td>&nbsp;Solder Paste Dispensing Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+L</strong></td>\n"
#~ "                        <td>&nbsp;Film PCB Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+N</strong></td>\n"
#~ "                        <td>&nbsp;Non-Copper Clearing Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+P</strong></td>\n"
#~ "                        <td>&nbsp;Paint Area Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+Q</strong></td>\n"
#~ "                        <td>&nbsp;PDF Import Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+R</strong></td>\n"
#~ "                        <td>&nbsp;Transformations Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+S</strong></td>\n"
#~ "                        <td>&nbsp;View File Source</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+U</strong></td>\n"
#~ "                        <td>&nbsp;Cutout PCB Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+1</strong></td>\n"
#~ "                        <td>&nbsp;Enable all Plots</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+2</strong></td>\n"
#~ "                        <td>&nbsp;Disable all Plots</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+3</strong></td>\n"
#~ "                        <td>&nbsp;Disable Non-selected Plots</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+F10</strong></td>\n"
#~ "                        <td>&nbsp;Toggle Full Screen</td>\n"
#~ "                    </tr>                 \n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>CTRL+ALT+X</strong></"
#~ "td>\n"
#~ "                        <td>&nbsp;Abort current task (gracefully)</td>\n"
#~ "                    </tr>                    \n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>F1</strong></td>\n"
#~ "                        <td>&nbsp;Open Online Manual</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>F4</strong></td>\n"
#~ "                        <td>&nbsp;Open Online Tutorials</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Del</strong></td>\n"
#~ "                        <td>&nbsp;Delete Object</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Del</strong></td>\n"
#~ "                        <td>&nbsp;Alternate: Delete Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>'`'</strong></td>\n"
#~ "                        <td>&nbsp;(left to Key_1)Toogle Notebook Area "
#~ "(Left Side)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>SPACE</strong></td>\n"
#~ "                        <td>&nbsp;En(Dis)able Obj Plot</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Escape</strong></td>\n"
#~ "                        <td>&nbsp;Deselects all objects</td>\n"
#~ "                    </tr>\n"
#~ "                </tbody>\n"
#~ "            </table>\n"
#~ "    \n"
#~ "            "
#~ msgstr ""
#~ "<b>General Shortcut list</b><br>\n"
#~ "            <table border=\"0\" cellpadding=\"0\" cellspacing=\"0\" style="
#~ "\"width:283px\">\n"
#~ "                <tbody>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\" width=\"89\"><strong>F3</"
#~ "strong></td>\n"
#~ "                        <td width=\"194\"><span style=\"color:"
#~ "#006400\"><strong>&nbsp;Afișează Lista de Shortcut-uri</strong></span></"
#~ "td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>1</strong></td>\n"
#~ "                        <td>&nbsp;Focus in Tab-ul Proiect</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>2</strong></td>\n"
#~ "                        <td>&nbsp;Focus in Tab-ul Selectat</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>3</strong></td>\n"
#~ "                        <td>&nbsp;Focus in Tab-ul Unelte</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>B</strong></td>\n"
#~ "                        <td>&nbsp;Gerber Nou</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>E</strong></td>\n"
#~ "                        <td>&nbsp;Editează Obiectul (daca este selectat)</"
#~ "td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>G</strong></td>\n"
#~ "                        <td>&nbsp;Grid On/Off</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>J</strong></td>\n"
#~ "                        <td>&nbsp;Sari la Coordinate</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>L</strong></td>\n"
#~ "                        <td>&nbsp;Excellon Nou</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>M</strong></td>\n"
#~ "                        <td>&nbsp;Mută Obj</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>N</strong></td>\n"
#~ "                        <td>&nbsp;Geometrie Nouă</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>O</strong></td>\n"
#~ "                        <td>&nbsp;Setează Originea</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Q</strong></td>\n"
#~ "                        <td>&nbsp;Schimbă Unitătile</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>P</strong></td>\n"
#~ "                        <td>&nbsp;Deschide Unealta de Proprietati</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>R</strong></td>\n"
#~ "                        <td>&nbsp;Rotește cu 90 grade CW</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>S</strong></td>\n"
#~ "                        <td>&nbsp;Comută Shell (linia de comandă)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>T</strong></td>\n"
#~ "                        <td>&nbsp;Adaugă o Unealtă (când focus-ul este in "
#~ "Tab-ul Selectat pt Geo, sau in Unealta NCC sau unealta Paint)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>V</strong></td>\n"
#~ "                        <td>&nbsp;Mărește și potrivește</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>X</strong></td>\n"
#~ "                        <td>&nbsp;Oglindește pe axa X</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Y</strong></td>\n"
#~ "                        <td>&nbsp;Oglindește pe axa Y</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>&#39;-&#39;</strong></"
#~ "td>\n"
#~ "                        <td>&nbsp;Micșorează</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>&#39;=&#39;</strong></"
#~ "td>\n"
#~ "                        <td>&nbsp;Mărește</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>CTRL+A</strong></td>\n"
#~ "                        <td>&nbsp;Selectează Tot</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>CTRL+C</strong></td>\n"
#~ "                        <td>&nbsp;Copiază Obiect</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>CTRL+E</strong></td>\n"
#~ "                        <td>&nbsp;Deschide fişier Excellon</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>CTRL+G</strong></td>\n"
#~ "                        <td>&nbsp;Deschide fişier Gerber</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>CTRL+N</strong></td>\n"
#~ "                        <td>&nbsp;Proiect Nou</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>CTRL+M</strong></td>\n"
#~ "                        <td>&nbsp;Unealta de Masurare</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>CTRL+O</strong></td>\n"
#~ "                        <td>&nbsp;Deschide Proiect</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>CTRL+S</strong></td>\n"
#~ "                        <td>&nbsp;Salvează Proiect ca</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>CTRL+F10</strong></td>\n"
#~ "                        <td>&nbsp;Comută Aria de Afișare</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>SHIFT+C</strong></td>\n"
#~ "                        <td>&nbsp;Copiază Nume Obiect</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>SHIFT+E</strong></td>\n"
#~ "                        <td>&nbsp;Comută Editor Cod</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>SHIFT+G</strong></td>\n"
#~ "                        <td>&nbsp;Comută Axele</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>SHIFT+P</strong></td>\n"
#~ "                        <td>&nbsp;Deschide Preferințe</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>SHIFT+R</strong></td>\n"
#~ "                        <td>&nbsp;Rotește cu 90 grade CCW</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>SHIFT+S</strong></td>\n"
#~ "                        <td>&nbsp;Rulează un Script</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>SHIFT+W</strong></td>\n"
#~ "                        <td>&nbsp;Comută Spatiul de Lucru</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>SHIFT+X</strong></td>\n"
#~ "                        <td>&nbsp;Deformează pe axa X</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>SHIFT+Y</strong></td>\n"
#~ "                        <td>&nbsp;Deformează pe axa Y</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+C</strong></td>\n"
#~ "                        <td>&nbsp;Unealta Calculatoare</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+D</strong></td>\n"
#~ "                        <td>&nbsp;Unealta 2-Layer</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+K</strong></td>\n"
#~ "                        <td>&nbsp;Unealta Dispensare Pasta Fludor</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+L</strong></td>\n"
#~ "                        <td>&nbsp;Unealta Film PCB</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+N</strong></td>\n"
#~ "                        <td>&nbsp;Unealta de curățare zone cupru</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+P</strong></td>\n"
#~ "                        <td>&nbsp;Unealta Paint</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+Q</strong></td>\n"
#~ "                        <td>&nbsp;Unealta de import PDF</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+R</strong></td>\n"
#~ "                        <td>&nbsp;Unealta Transformări</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+S</strong></td>\n"
#~ "                        <td>&nbsp;Vizualiz. Codul Sursa</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+U</strong></td>\n"
#~ "                        <td>&nbsp;Unealta de Decupare</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+1</strong></td>\n"
#~ "                        <td>&nbsp;Activează toate Afișările</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+2</strong></td>\n"
#~ "                        <td>&nbsp;Dezactivează toate afişările/td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+3</strong></td>\n"
#~ "                        <td>&nbsp;Dezactivează toate afişările "
#~ "neselectate</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+F10</strong></td>\n"
#~ "                        <td>&nbsp;Comută Full Screen</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                       <td height=\"20\"><strong>CTRL+ALT+X</strong></"
#~ "td>\n"
#~ "                        <td>&nbsp;Anuleaza taskul curent</td>\n"
#~ "                    </tr>                    \n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>F1</strong></td>\n"
#~ "                        <td>&nbsp;Deschide Manualul Online</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>F4</strong></td>\n"
#~ "                        <td>&nbsp;Deschide Tutoriale Online</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Del</strong></td>\n"
#~ "                        <td>&nbsp;Șterge Obiectul</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Del</strong></td>\n"
#~ "                        <td>&nbsp;Alternativ: Șterge Unealta</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>'`'</strong></td>\n"
#~ "                        <td>&nbsp;(in stânga Tasta_1)Comută Aria Notebook "
#~ "(in stânga)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>SPACE</strong></td>\n"
#~ "                        <td>&nbsp;(Dez)Activează afișare obiect</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Escape</strong></td>\n"
#~ "                        <td>&nbsp;Deselectează toate obiectele</td>\n"
#~ "                    </tr>\n"
#~ "                </tbody>\n"
#~ "            </table>\n"
#~ "    \n"
#~ "            "

#~ msgid ""
#~ "<b>Editor Shortcut list</b><br>\n"
#~ "            <br>\n"
#~ "            <strong><span style=\"color:#0000ff\">GEOMETRY EDITOR</span></"
#~ "strong><br>\n"
#~ "    \n"
#~ "            <table border=\"0\" cellpadding=\"0\" cellspacing=\"0\" style="
#~ "\"width:283px\">\n"
#~ "                <tbody>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\" width=\"89\"><strong>A</"
#~ "strong></td>\n"
#~ "                        <td width=\"194\">&nbsp;Draw an Arc</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>B</strong></td>\n"
#~ "                        <td>&nbsp;Buffer Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>C</strong></td>\n"
#~ "                        <td>&nbsp;Copy Geo Item</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>D</strong></td>\n"
#~ "                        <td>&nbsp;Within Add Arc will toogle the ARC "
#~ "direction: CW or CCW</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>E</strong></td>\n"
#~ "                        <td>&nbsp;Polygon Intersection Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>I</strong></td>\n"
#~ "                        <td>&nbsp;Paint Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>J</strong></td>\n"
#~ "                        <td>&nbsp;Jump to Location (x, y)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>K</strong></td>\n"
#~ "                        <td>&nbsp;Toggle Corner Snap</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>M</strong></td>\n"
#~ "                        <td>&nbsp;Move Geo Item</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>M</strong></td>\n"
#~ "                        <td>&nbsp;Within Add Arc will cycle through the "
#~ "ARC modes</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>N</strong></td>\n"
#~ "                        <td>&nbsp;Draw a Polygon</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>O</strong></td>\n"
#~ "                        <td>&nbsp;Draw a Circle</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>P</strong></td>\n"
#~ "                        <td>&nbsp;Draw a Path</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>R</strong></td>\n"
#~ "                        <td>&nbsp;Draw Rectangle</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>S</strong></td>\n"
#~ "                        <td>&nbsp;Polygon Substraction Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>T</strong></td>\n"
#~ "                        <td>&nbsp;Add Text Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>U</strong></td>\n"
#~ "                        <td>&nbsp;Polygon Union Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>X</strong></td>\n"
#~ "                        <td>&nbsp;Flip shape on X axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Y</strong></td>\n"
#~ "                        <td>&nbsp;Flip shape on Y axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>SHIFT+X</strong></td>\n"
#~ "                        <td>&nbsp;Skew shape on X axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>SHIFT+Y</strong></td>\n"
#~ "                        <td>&nbsp;Skew shape on Y axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+R</strong></td>\n"
#~ "                        <td>&nbsp;Editor Transformation Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+X</strong></td>\n"
#~ "                        <td>&nbsp;Offset shape on X axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+Y</strong></td>\n"
#~ "                        <td>&nbsp;Offset shape on Y axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>CTRL+M</strong></td>\n"
#~ "                        <td>&nbsp;Measurement Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>CTRL+S</strong></td>\n"
#~ "                        <td>&nbsp;Save Object and Exit Editor</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>CTRL+X</strong></td>\n"
#~ "                        <td>&nbsp;Polygon Cut Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Space</strong></td>\n"
#~ "                        <td>&nbsp;Rotate Geometry</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ENTER</strong></td>\n"
#~ "                        <td>&nbsp;Finish drawing for certain tools</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ESC</strong></td>\n"
#~ "                        <td>&nbsp;Abort and return to Select</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Del</strong></td>\n"
#~ "                        <td>&nbsp;Delete Shape</td>\n"
#~ "                    </tr>\n"
#~ "                </tbody>\n"
#~ "            </table>\n"
#~ "            <br>\n"
#~ "            <br>\n"
#~ "            <strong><span style=\"color:#ff0000\">EXCELLON EDITOR</span></"
#~ "strong><br>\n"
#~ "            <table border=\"0\" cellpadding=\"0\" cellspacing=\"0\" style="
#~ "\"width:283px\">\n"
#~ "                <tbody>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\" width=\"89\"><strong>A</"
#~ "strong></td>\n"
#~ "                        <td width=\"194\">&nbsp;Add Drill Array</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>C</strong></td>\n"
#~ "                        <td>&nbsp;Copy Drill(s)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>D</strong></td>\n"
#~ "                        <td>&nbsp;Add Drill</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>J</strong></td>\n"
#~ "                        <td>&nbsp;Jump to Location (x, y)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>M</strong></td>\n"
#~ "                        <td>&nbsp;Move Drill(s)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\" width=\"89\"><strong>Q</"
#~ "strong></td>\n"
#~ "                        <td width=\"194\">&nbsp;Add Slot Array</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>R</strong></td>\n"
#~ "                        <td>&nbsp;Resize Drill(s)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>T</strong></td>\n"
#~ "                        <td>&nbsp;Add a new Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\" width=\"89\"><strong>W</"
#~ "strong></td>\n"
#~ "                        <td width=\"194\">&nbsp;Add Slot</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Del</strong></td>\n"
#~ "                        <td>&nbsp;Delete Drill(s)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Del</strong></td>\n"
#~ "                        <td>&nbsp;Alternate: Delete Tool(s)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ESC</strong></td>\n"
#~ "                        <td>&nbsp;Abort and return to Select</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>CTRL+S</strong></td>\n"
#~ "                        <td>&nbsp;Save Object and Exit Editor</td>\n"
#~ "                    </tr>\n"
#~ "                </tbody>\n"
#~ "            </table>\n"
#~ "            <br>\n"
#~ "            <br>\n"
#~ "            <strong><span style=\"color:#00ff00\">GERBER EDITOR</span></"
#~ "strong><br>\n"
#~ "            <table border=\"0\" cellpadding=\"0\" cellspacing=\"0\" style="
#~ "\"width:283px\">\n"
#~ "                <tbody>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\" width=\"89\"><strong>A</"
#~ "strong></td>\n"
#~ "                        <td width=\"194\">&nbsp;Add Pad Array</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>B</strong></td>\n"
#~ "                        <td>&nbsp;Buffer</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>C</strong></td>\n"
#~ "                        <td>&nbsp;Copy</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>D</strong></td>\n"
#~ "                        <td>&nbsp;Add Disc</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>E</strong></td>\n"
#~ "                        <td>&nbsp;Add SemiDisc</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>J</strong></td>\n"
#~ "                        <td>&nbsp;Jump to Location (x, y)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>M</strong></td>\n"
#~ "                        <td>&nbsp;Move</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>N</strong></td>\n"
#~ "                        <td>&nbsp;Add Region</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>P</strong></td>\n"
#~ "                        <td>&nbsp;Add Pad</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>R</strong></td>\n"
#~ "                        <td>&nbsp;Within Track & Region Tools will cycle "
#~ "in REVERSE the bend modes</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>S</strong></td>\n"
#~ "                        <td>&nbsp;Scale</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>T</strong></td>\n"
#~ "                        <td>&nbsp;Add Track</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>T</strong></td>\n"
#~ "                        <td>&nbsp;Within Track & Region Tools will cycle "
#~ "FORWARD the bend modes</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Del</strong></td>\n"
#~ "                        <td>&nbsp;Delete</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Del</strong></td>\n"
#~ "                        <td>&nbsp;Alternate: Delete Apertures</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ESC</strong></td>\n"
#~ "                        <td>&nbsp;Abort and return to Select</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>CTRL+E</strong></td>\n"
#~ "                        <td>&nbsp;Eraser Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>CTRL+S</strong></td>\n"
#~ "                        <td>&nbsp;Save Object and Exit Editor</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                     <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+A</strong></td>\n"
#~ "                        <td>&nbsp;Mark Area Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+N</strong></td>\n"
#~ "                        <td>&nbsp;Poligonize Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+R</strong></td>\n"
#~ "                        <td>&nbsp;Transformation Tool</td>\n"
#~ "                    </tr>\n"
#~ "                </tbody>\n"
#~ "            </table>\n"
#~ "                    "
#~ msgstr ""
#~ "<b>Lista de teste shortcut in Editor</b><br>\n"
#~ "            <br>\n"
#~ "            <strong><span style=\"color:#0000ff\">EDITOR GEOMETRII</"
#~ "span></strong><br>\n"
#~ "    \n"
#~ "            <table border=\"0\" cellpadding=\"0\" cellspacing=\"0\" style="
#~ "\"width:283px\">\n"
#~ "                <tbody>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\" width=\"89\"><strong>A</"
#~ "strong></td>\n"
#~ "                        <td width=\"194\">&nbsp;Deseneaza un arc</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>B</strong></td>\n"
#~ "                        <td>&nbsp;Unealta Bufer</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>C</strong></td>\n"
#~ "                        <td>&nbsp;Copiază o geometrie</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>D</strong></td>\n"
#~ "                        <td>&nbsp;Pt cazul Adauga Arc va schimba directia "
#~ "curbei: CW sau CCW</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>E</strong></td>\n"
#~ "                        <td>&nbsp;Unealta Intersectie Poligoane</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>I</strong></td>\n"
#~ "                        <td>&nbsp;Unealta Paint</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>J</strong></td>\n"
#~ "                        <td>&nbsp;Sari la locatie (x, y)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>K</strong></td>\n"
#~ "                        <td>&nbsp;Comută magnet colt</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>M</strong></td>\n"
#~ "                        <td>&nbsp;Muta geometrie</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>M</strong></td>\n"
#~ "                        <td>&nbsp;Pt cazul Adauga Arc va parcurge "
#~ "modurile de realizare a curbelor</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>N</strong></td>\n"
#~ "                        <td>&nbsp;Deseneaza un Poligon</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>O</strong></td>\n"
#~ "                        <td>&nbsp;Deseneaza un Cerc</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>P</strong></td>\n"
#~ "                        <td>&nbsp;Deseneaza o Cale</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>R</strong></td>\n"
#~ "                        <td>&nbsp;Deseneaza un Patrulater</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>S</strong></td>\n"
#~ "                        <td>&nbsp;Unealta de Substractie Poligoane</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>T</strong></td>\n"
#~ "                        <td>&nbsp;Unealta de adaugare Text</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>U</strong></td>\n"
#~ "                        <td>&nbsp;Unealta de Uniune Poligoane</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>X</strong></td>\n"
#~ "                        <td>&nbsp;Oglindire pe axa X</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Y</strong></td>\n"
#~ "                        <td>&nbsp;Oglindire pe axa Y</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>SHIFT+X</strong></td>\n"
#~ "                        <td>&nbsp;Deformeaza pe axa X</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>SHIFT+Y</strong></td>\n"
#~ "                        <td>&nbsp;Deformeaza pe axa Y</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+R</strong></td>\n"
#~ "                        <td>&nbsp;Unealta Transformare din Editor</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+X</strong></td>\n"
#~ "                        <td>&nbsp;Deplaseaza pe axa X</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+Y</strong></td>\n"
#~ "                        <td>&nbsp;Deplaseaza pe axa Y</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>CTRL+M</strong></td>\n"
#~ "                        <td>&nbsp;Unealta de masurare</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>CTRL+S</strong></td>\n"
#~ "                        <td>&nbsp;Inchide Editorul</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>CTRL+X</strong></td>\n"
#~ "                        <td>&nbsp;Unealta de Decupare Poligoane</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Space</strong></td>\n"
#~ "                        <td>&nbsp;Roteste geometria</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ENTER</strong></td>\n"
#~ "                        <td>&nbsp;Finalizeaza desenul pt anumite tipuri "
#~ "de geo.</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ESC</strong></td>\n"
#~ "                        <td>&nbsp;Renunță si revino la Unealta Selectie</"
#~ "td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Del</strong></td>\n"
#~ "                        <td>&nbsp;Sterge geometrie</td>\n"
#~ "                    </tr>\n"
#~ "                </tbody>\n"
#~ "            </table>\n"
#~ "            <br>\n"
#~ "            <br>\n"
#~ "            <strong><span style=\"color:#ff0000\">EDITOR EXCELLON</span></"
#~ "strong><br>\n"
#~ "            <table border=\"0\" cellpadding=\"0\" cellspacing=\"0\" style="
#~ "\"width:283px\">\n"
#~ "                <tbody>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\" width=\"89\"><strong>A</"
#~ "strong></td>\n"
#~ "                        <td width=\"194\">&nbsp;Adauga o arie de gauri</"
#~ "td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>C</strong></td>\n"
#~ "                        <td>&nbsp;Copiază gauri</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>D</strong></td>\n"
#~ "                        <td>&nbsp;Adauga o gaura</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>J</strong></td>\n"
#~ "                        <td>&nbsp;Sari la locatia (x, y)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>M</strong></td>\n"
#~ "                        <td>&nbsp;Muta gauri</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\" width=\"89\"><strong>Q</"
#~ "strong></td>\n"
#~ "                        <td width=\"194\">&nbsp;Adăugați Arie de sloturi</"
#~ "td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>R</strong></td>\n"
#~ "                        <td>&nbsp;Redimensioneaza gauri</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>T</strong></td>\n"
#~ "                        <td>&nbsp;Adauga o noua unealta</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\" width=\"89\"><strong>W</"
#~ "strong></td>\n"
#~ "                        <td width=\"194\">&nbsp;Adăugați slot</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Del</strong></td>\n"
#~ "                        <td>&nbsp;Sterge gauri</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Del</strong></td>\n"
#~ "                        <td>&nbsp;Alternativ: Sterge Unelte</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ESC</strong></td>\n"
#~ "                        <td>&nbsp;Renunță si revino la Unealta de "
#~ "Selectie</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>CTRL+S</strong></td>\n"
#~ "                        <td>&nbsp;Inchide Editorul</td>\n"
#~ "                    </tr>\n"
#~ "                </tbody>\n"
#~ "            </table>\n"
#~ "            <br>\n"
#~ "            <br>\n"
#~ "            <strong><span style=\"color:#00ff00\">EDITOR GERBER</span></"
#~ "strong><br>\n"
#~ "            <table border=\"0\" cellpadding=\"0\" cellspacing=\"0\" style="
#~ "\"width:283px\">\n"
#~ "                <tbody>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\" width=\"89\"><strong>A</"
#~ "strong></td>\n"
#~ "                        <td width=\"194\">&nbsp;Adauga o arie de Paduri</"
#~ "td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>B</strong></td>\n"
#~ "                        <td>&nbsp;Bufer</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>C</strong></td>\n"
#~ "                        <td>&nbsp;Copiere</td>\n"
#~ "                    </tr>\n"
#~ "                <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>D</strong></td>\n"
#~ "                        <td>&nbsp;Adauga Disc</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>J</strong></td>\n"
#~ "                        <td>&nbsp;Sari la locatia (x, y)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>M</strong></td>\n"
#~ "                        <td>&nbsp;Muta</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>N</strong></td>\n"
#~ "                        <td>&nbsp;Adauga Regiune</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>P</strong></td>\n"
#~ "                        <td>&nbsp;Adauga Pad</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>R</strong></td>\n"
#~ "                        <td>&nbsp;In uneltele Traseu si Regiune va "
#~ "parcurge in Revers modurile de indoire</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>S</strong></td>\n"
#~ "                        <td>&nbsp;Scalare</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>T</strong></td>\n"
#~ "                        <td>&nbsp;Adauga Traseu</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>R</strong></td>\n"
#~ "                        <td>&nbsp;In uneltele Traseu si Regiune va "
#~ "parcurge in Avans modurile de indoire</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Del</strong></td>\n"
#~ "                        <td>&nbsp;Stergere</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Del</strong></td>\n"
#~ "                        <td>&nbsp;Alternativ: Sterge aperturi</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ESC</strong></td>\n"
#~ "                        <td>&nbsp;Renunță si revino la Unealta Selectie</"
#~ "td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>CTRL+E</strong></td>\n"
#~ "                        <td>&nbsp;Unealta Radieră</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>CTRL+S</strong></td>\n"
#~ "                        <td>&nbsp;Inchide Editorul</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+A</strong></td>\n"
#~ "                        <td>&nbsp;Unealta Marcare Arii</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+N</strong></td>\n"
#~ "                        <td>&nbsp;Unealta Poligonizare</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+R</strong></td>\n"
#~ "                        <td>&nbsp;Unealta Transformare</td>\n"
#~ "                    </tr>\n"
#~ "                </tbody>\n"
#~ "            </table>\n"
#~ "                    "

#~ msgid "[success] Done."
#~ msgstr "[success] Executat."

#~ msgid "[WARNING_NOTCL] Cancelled."
#~ msgstr "[WARNING_NOTCL] Anulat."

#~ msgid "[success] Added new tool with dia: {dia} {units}"
#~ msgstr "[success] O noua unealtă este adăugată cu diametrul: {dia} {units}"

#~ msgid "[WARNING_NOTCL] Application is saving the project. Please wait ..."
#~ msgstr ""
#~ "[WARNING_NOTCL] Aplicația salvează proiectul. Vă rugăm aşteptați ..."

#~ msgid "<b>%s:</b>"
#~ msgstr "<b>%s:</b>"

#~ msgid "%s:"
#~ msgstr "%s:"

#~ msgid "Object not found: %s"
#~ msgstr "Obiectul nu a fost gasit: %s"

#~ msgid "[success] Opened: %s"
#~ msgstr "[success] Incărcat: %s"

#~ msgid "[success] Paint All Done."
#~ msgstr "[success] 'Paint' pt toate poligoanele a fost efectuata."

#~ msgid ""
#~ "Could not do Paint All. Try a different combination of parameters. Or a "
#~ "different Method of paint\n"
#~ "%s"
#~ msgstr ""
#~ "Nu s-a putut efectua op. 'Paint' pt toate poligoanele. Incearcă o "
#~ "combinaţie diferita de parametri. Sau încearcă o alta metoda de 'pictat'\n"
#~ "%s"

#~ msgid "[success] Paint Area Done."
#~ msgstr "[success] 'Paint' pt poligoanele intr-o arie a fost efectuată."

#~ msgid "Generating panel ... Please wait."
#~ msgstr "Se generează panelul ... Va rugăm asteptati."

#~ msgid "...proccessing... [%s]"
#~ msgstr "...in procesare... [%s]"

#~ msgid "Parsing aperture %s geometry ..."
#~ msgstr "Se analizează geo pt. apertura: %s..."

#~ msgid "[success] Skew on the %s axis done ..."
#~ msgstr "[success] Deformarea pe axa %s executată ..."

#~ msgid "[ERROR_NOTCL] Could not load defaults file."
#~ msgstr ""
#~ "[ERROR_NOTCL] Nu a fost posibilă incărcarea fişierului cu valori default."

#~ msgid "[ERROR_NOTCL] Failed to parse defaults file."
#~ msgstr "[ERROR_NOTCL] Parsarea fişierului cu valori default a eșuat."

#~ msgid "[ERROR_NOTCL] An internal error has ocurred. See shell.\n"
#~ msgstr ""
#~ "[ERROR_NOTCL] A apărut o eroare internă. Verifică in TCL Shell pt mai "
#~ "multe detalii.\n"

#~ msgid "[success] Defaults saved."
#~ msgstr "[success] Valorile default au fost salvate."

#~ msgid "[success] Converted units to %s"
#~ msgstr "[success] Conversie unitati la %s"

#~ msgid "[WARNING_NOTCL] Export Code cancelled."
#~ msgstr "[WARNING_NOTCL Exportul GCode este anulat."

#~ msgid "[success] Origin set ..."
#~ msgstr "[success] Originea a fost setată ..."

#~ msgid "[success] Skew on X axis done."
#~ msgstr "[success] Deformare pe axa X executată."

#~ msgid "[success] Skew on Y axis done."
#~ msgstr "[success] Deformare pe axa Y executată."

#~ msgid "[success] New Grid added ..."
#~ msgstr "[success] O noua valoare pt Grila a fost adăugată..."

#~ msgid "[WARNING_NOTCL] Open Gerber cancelled."
#~ msgstr "[WARNING_NOTCL] Incărcarea unui fişier Gerber este anulată."

#~ msgid "[WARNING_NOTCL] Open G-Code cancelled."
#~ msgstr "[WARNING_NOTCL] Incărcarea unui fişier G-Code este anulată."

#~ msgid "[WARNING_NOTCL] Open Project cancelled."
#~ msgstr "[WARNING_NOTCL] Incărcarea unui Proiect a fost anulată."

#~ msgid "[WARNING_NOTCL] Open Config cancelled."
#~ msgstr "[WARNING_NOTCL] Incărcarea unui fişier de Configurare este anulată."

#~ msgid "[WARNING_NOTCL] No object selected."
#~ msgstr "[WARNING_NOTCL] Nici-un obiect selectat."

#~ msgid "[WARNING_NOTCL] Export SVG cancelled."
#~ msgstr "[WARNING_NOTCL] Exportul SVG este anulat."

#~ msgid "[WARNING_NOTCL] Export Excellon cancelled."
#~ msgstr "[WARNING_NOTCL] Exportul Excellon anulat."

#~ msgid "[WARNING_NOTCL] Export Gerber cancelled."
#~ msgstr "[WARNING_NOTCL] Exportul Gerber este anulat."

#~ msgid "[WARNING_NOTCL] Export DXF cancelled."
#~ msgstr "[WARNING_NOTCL] Exportul DXF anulat."

#~ msgid "[WARNING_NOTCL] Open SVG cancelled."
#~ msgstr "[WARNING_NOTCL] Importul SVG anulat."

#~ msgid "[WARNING_NOTCL] Open DXF cancelled."
#~ msgstr "[WARNING_NOTCL] Incărcarea fişier DXF anulată."

#~ msgid "[WARNING_NOTCL] No object Box. Using instead %s"
#~ msgstr ""
#~ "[WARNING_NOTCL] Nu este nici-un container Box pentru obiect. Se foloseşte "
#~ "%s"

#~ msgid "[ERROR_NOTCL] Failed to parse file: {name}. {error}"
#~ msgstr "[ERROR_NOTCL] Eşec in parsarea fişierului: {name}. {error}"

#~ msgid "[ERROR_NOTCL] An internal error has occurred. See shell.\n"
#~ msgstr ""
#~ "[ERROR_NOTCL]  A apărut o eroare interna. Verifică in TCL Shell pt mai "
#~ "multe detalii.\n"

#~ msgid "[ERROR_NOTCL] Failed to verify project file: %s. Retry to save it."
#~ msgstr ""
#~ "[ERROR_NOTCL] Verificarea proiectului salvat a eșuat: %s. Incearcă să il "
#~ "salvezi din nou."

#~ msgid ""
#~ "[ERROR_NOTCL] Failed to parse saved project file: %s. Retry to save it."
#~ msgstr ""
#~ "[ERROR_NOTCL] Parsarea proiectului salvat a eșuat: %s. Incearcă să il "
#~ "salvezi din nou."

#~ msgid "[ERROR_NOTCL] Failed to save project file: %s. Retry to save it."
#~ msgstr ""
#~ "[ERROR_NOTCL] Salvarea proiectului a eșuat: %s. Incearcă să il salvezi "
#~ "din nou."

#~ msgid "[ERROR_NOTCL] Wrong value format entered, use a number."
#~ msgstr ""
#~ "[ERROR_NOTCL] O valoare gresita a fost introdusa. Foloseşte un număr."

#~ msgid "[ERROR_NOTCL] Cancelled. Empty file, it has no geometry..."
#~ msgstr "[ERROR_NOTCL] Anulat. Fişier gol, nu are date geometrice."

#~ msgid "[WARNING_NOTCL] Export Machine Code cancelled ..."
#~ msgstr "[WARNING_NOTCL] Exportul codului masina CNC a fost anulat ..."

#~ msgid "[WARNING_NOTCL] No such file or directory"
#~ msgstr "[WARNING_NOTCL] Nu exista un asemenea fişier sau director"

#~ msgid "[ERROR_NOTCL] The value is mistyped. Check the value. %s"
#~ msgstr "[ERROR_NOTCL] Valoarea este gresita. Verifică valoarea. %s"

#~ msgid "[ERROR_NOTCL] Cancelled."
#~ msgstr "[ERROR_NOTCL] Anulat."

#~ msgid "Tool Dia:"
#~ msgstr "Dia. Unealtă:"

#~ msgid "Nr of drills:"
#~ msgstr "Nr. op. găurire"

#~ msgid "Direction:"
#~ msgstr "Direcţie:"

#~ msgid "Pitch:"
#~ msgstr "Pas:"

#~ msgid "Length:"
#~ msgstr "Lungime:"

#~ msgid "Nr of slots:"
#~ msgstr "Nr de sloturi:"

#~ msgid "[success] Deleted tool with dia: {del_dia} {units}"
#~ msgstr "[success] Unealta stearsa cu diametrul: {del_dia} {units}"

#~ msgid "Tool dia:"
#~ msgstr "Dia unealtă:"

#~ msgid "Overlap Rate:"
#~ msgstr "Rata suprapunere:"

#~ msgid "Method:"
#~ msgstr "Metoda:"

#~ msgid "[ERROR_NOTCL] Wrong value format entered for Rotate, use a number."
#~ msgstr ""
#~ "[ERROR_NOTCL] Valoare incorecta intodusa pentru Rotaţie, foloseşte un "
#~ "număr Real."

#~ msgid "[ERROR_NOTCL] Wrong value format entered for Skew X, use a number."
#~ msgstr ""
#~ "[ERROR_NOTCL] Valoare incorecta intodusa pentru Deformare X, foloseşte un "
#~ "număr Real."

#~ msgid "[ERROR_NOTCL] Wrong value format entered for Skew Y, use a number."
#~ msgstr ""
#~ "[ERROR_NOTCL] Valoare incorecta intodusa pentru Deformare Y, foloseşte un "
#~ "număr Real."

#~ msgid "[ERROR_NOTCL] Wrong value format entered for Scale X, use a number."
#~ msgstr ""
#~ "[ERROR_NOTCL] Valoare incorecta intodusa pentru Scalare X, foloseşte un "
#~ "număr Real."

#~ msgid "[ERROR_NOTCL] Wrong value format entered for Scale Y, use a number."
#~ msgstr ""
#~ "[ERROR_NOTCL] Valoare incorecta intodusa pentru Scalare Y, foloseşte un "
#~ "număr Real."

#~ msgid "[ERROR_NOTCL] Wrong value format entered for Offset X, use a number."
#~ msgstr ""
#~ "[ERROR_NOTCL] Valoare incorecta intodusa pentru Ofset pe X, foloseşte un "
#~ "număr Real."

#~ msgid "[ERROR_NOTCL] Wrong value format entered for Offset Y, use a number."
#~ msgstr ""
#~ "[ERROR_NOTCL] Valoare incorecta intodusa pentru Ofset pe Y, foloseşte un "
#~ "număr Real."

#~ msgid "[success] Flip on the Y axis done ..."
#~ msgstr "Oglindirea pe axa X efectuata ..."

#~ msgid "[success] Flip on the X axis done ..."
#~ msgstr "Oglindirea pe axa Y efectuata ..."

#~ msgid "[success] Offset on the %s axis done ..."
#~ msgstr "[success] Deplasarea pe axa %s executată ..."

#~ msgid ""
#~ "[WARNING_NOTCL] Editing MultiGeo Geometry, tool: {tool} with diameter: "
#~ "{dia}"
#~ msgstr ""
#~ "[WARNING_NOTCL] Se editeaza un obiect tip Geometrie MultiGeo , unealta: "
#~ "{tool} cu diametrul: {dia}"

#~ msgid "Clear GUI Settings:"
#~ msgstr "Șterge setările GUI:"

#~ msgid "Duration:"
#~ msgstr "Durata:"

#~ msgid "Fast Plunge:"
#~ msgstr "Plonjare rapida:"

#~ msgid "Linear Dir.:"
#~ msgstr "Dir. Lineara:"

#~ msgid "Plot kind:"
#~ msgstr "Tip afișare:"

#~ msgid ""
#~ "Select from the Tools Table above\n"
#~ "the tools you want to include."
#~ msgstr ""
#~ "Selectează din Tabela de Unelte de mai sus,\n"
#~ "uneltele care trebuie incluse."

#~ msgid ""
#~ "[WARNING_NOTCL] Tool Diameter is zero value. Change it to a positive real "
#~ "number."
#~ msgstr ""
#~ "[WARNING_NOTCL] Diametrul uneltei este zero. Schimbă-l intr-o val. "
#~ "pozitivă Reala."

#~ msgid "[success] Gerber %s was mirrored..."
#~ msgstr "[success]Obiectul Gerberr %s a fost oglindit..."

#~ msgid "[success] Excellon %s was mirrored..."
#~ msgstr "[success] Obiectul Excellon %s a fost oglindit..."

#~ msgid "[success] Geometry %s was mirrored..."
#~ msgstr "[success] Obiectul Geometrie %s a fost oglindit..."

#~ msgid "[WARNING_NOTCL] No object(s) selected."
#~ msgstr "[WARNING_NOTCL] Nu sunt obiecte selectate."

#~ msgid "[success] %s object was moved ..."
#~ msgstr "[success] Obiectul %s a fost mutat ..."

#~ msgid "[WARNING_NOTCL] Object(s) not selected"
#~ msgstr "[WARNING_NOTCL] Obiectele nu sunt selectate."

#~ msgid "[WARNING_NOTCL] Buffering ..."
#~ msgstr "[WARNING_NOTCL] Buffering ..."

#~ msgid "[success] Non-Copper Clearing with ToolDia = %s started."
#~ msgstr ""
#~ "[success] Curățarea de Cupru in exces cu Dia Unealtă = %s a inceput."

#~ msgid "[ERROR_NOTCL] NCCTool.clear_non_copper() --> %s"
#~ msgstr "[ERROR_NOTCL] NCCTool.clear_non_copper() --> %s"

#~ msgid "[success] NCC Tool finished."
#~ msgstr "[success] Unealta NCC s-a terminat."

#~ msgid ""
#~ "[WARNING_NOTCL] NCC Tool finished but some PCB features could not be "
#~ "cleared. Check the result."
#~ msgstr ""
#~ "[WARNING_NOTCL] Unealta NCC a terminat lucrul dar unele zone PCB nu au "
#~ "putut fi curățate de Cu. Verifică rezultatul."

#~ msgid "[success] Non-Copper Rest Clearing with ToolDia = %s started."
#~ msgstr ""
#~ "[success] Curățarea de Cupru tip Rest cu dia unealtă = %s a inceput.."

#~ msgid "[ERROR_NOTCL] NCCTool.clear_non_copper_rest() --> %s"
#~ msgstr "[ERROR_NOTCL] NCCTool.clear_non_copper_rest() --> %s"

#~ msgid ""
#~ "[ERROR_NOTCL] NCC Tool finished but could not clear the object with "
#~ "current settings."
#~ msgstr ""
#~ "[ERROR_NOTCL] Unealta NCC a termiant lucrul dar nu a fost posibil sa fie "
#~ "curățată de Cu obiectul cu setările curente."

#~ msgid "[WARNING_NOTCL] Open PDF cancelled."
#~ msgstr "[WARNING_NOTCL] Incărcarea fişier PDF anulată."

#~ msgid "[ERROR_NOTCL] Open PDF file failed."
#~ msgstr "[ERROR_NOTCL] Deschiderea unui fişier PDF a eșuat."

#~ msgid "[success] Rendered: %s"
#~ msgstr "[success] Analizat: %s"

#~ msgid ""
#~ "How to select the polygons to paint.<BR>Options:<BR>- <B>Single Polygons</"
#~ "B>: left mouse click on the polygon to be painted.<BR>- <B>Area "
#~ "Selection</B>: left mouse click to start selection of the area to be "
#~ "painted.<BR>- <B>All Polygons</B>: paint all polygons.<BR>- <B>Reference "
#~ "Object</B>: paint an area described by an external reference object."
#~ msgstr ""
#~ "Cum să selectați poligoanele de pictat. <BR>Opțiuni: <BR>-<B> Poligoane "
#~ "individuale </B>: faceți clic stânga cu mouse pe poligonul care urmează "
#~ "să fie pictat. <BR>-<B>Selecția zonei</B>: faceți clic stânga cu mouse-ul "
#~ "pentru a începe selecția zonei care urmează să fie pictată. <BR>-<B> "
#~ "Toate poligoanele </B>: pictați toate poligoanele. <BR>-<B>Obiect de "
#~ "referință</B>: pictați o zonă descrisă de un obiect de referință extern."

#~ msgid ""
#~ "[ERROR_NOTCL] There is no Painting Geometry in the file.\n"
#~ "Usually it means that the tool diameter is too big for the painted "
#~ "geometry.\n"
#~ "Change the painting parameters and try again."
#~ msgstr ""
#~ "[ERROR_NOTCL] Nu exista o geometrie 'pictata' in acest fişier.\n"
#~ "De obicei aceasta inseamna că diametrul uneltei este prea mare \n"
#~ "pt a fi folosit in obiectul Geometrie de 'pictat'.\n"
#~ "Schimbă parametrii de 'pictat' și încearcă din nou."

#~ msgid "[WARNING_NOTCL]No object Box. Using instead %s"
#~ msgstr ""
#~ "[WARNING_NOTCL] Nu este disponibil nici-un container Box pentru obiect. "
#~ "Se foloseşte %s"

#~ msgid "[success] Imported: %s"
#~ msgstr "[success] Importat: %s"

#~ msgid "[ERROR_NOTCL] Generating new object failed."
#~ msgstr "[ERROR_NOTCL] Generarea unui nou obiect a eșuat."

#~ msgid "[success] Created: %s"
#~ msgstr "[success] Creat: %s"

#~ msgid "[success] Rotate done ..."
#~ msgstr "[success] Rotaţie executată ..."

#~ msgid ""
#~ "When choosing the 'Itself' option the non copper clearing extent\n"
#~ "is based on the object that is copper cleared.\n"
#~ " Choosing the 'Box' option will do non copper clearing within the box\n"
#~ "specified by another object different than the one that is copper cleared."
#~ msgstr ""
#~ "Atunci când alegeți opțiunea „Însuși”, intinderea suprafeței curățate de "
#~ "Cu\n"
#~ "se bazează pe obiectul care este curățat de cupru.\n"
#~ "Alegerea opțiunii „Cutie” va efectua o curățare fără cupru\n"
#~ "în cadrul delimitarii specificate de un alt obiect diferit de cel care "
#~ "este curățat de cupru."

#~ msgid ""
#~ "How to select the polygons to paint.<BR>Options:<BR>- <B>Single</B>: left "
#~ "mouse click on the polygon to be painted.<BR>- <B>Area</B>: left mouse "
#~ "click to start selection of the area to be painted.<BR>- <B>All</B>: "
#~ "paint all polygons.<BR>- <B>Ref</B>: paint an area described by an "
#~ "external reference object."
#~ msgstr ""
#~ "Cum se selectează poligoanele de pictat. <BR>Opțiuni: <BR>-<B> Singur </"
#~ "B>: faceți clic stânga cu mouse-ul pe poligonul care urmează să fie "
#~ "pictat. <BR>-<B> Zona </B>: faceți clic stânga cu mouse pentru a începe "
#~ "selecția zonei care urmează să fie pictată. <BR>-<B> Toate </B>: pictați "
#~ "toate poligonele. <BR>-<B> Ref </B>: pictați o zonă descrisă de un obiect "
#~ "de referință extern."

#~ msgid "Geometry object to be painted.                        "
#~ msgstr "Obiectul tip Geometrie care să fie 'pictat'"

#~ msgid ""
#~ "After clicking here, click inside<BR>the polygon you wish to be painted "
#~ "if <B>Single</B> is selected.<BR>If <B>Area</B> is selected, then the "
#~ "selection of the area to be painted<BR>will be initiated by a first click "
#~ "and finished by the second mouse click.<BR>If <B>All</B>  is selected "
#~ "then the Paint will start after click.<BR>If <B>Ref</B>  is selected then "
#~ "the Paint will start after click,<BR>and the painted area will be "
#~ "described by a selected object.<BR>A new Geometry object with the tool "
#~ "paths will be created."
#~ msgstr ""
#~ "După ce faceți clic aici, faceți clic pe <BR> poligonul pe care doriți să "
#~ "fie pictat dacă este selectat <B> Single </B>. <BR>Dacă <B> Zonă</B> este "
#~ "selectat, atunci selecţia zonei pentru fi pictată <BR>va fi inițiată cu "
#~ "un prim clic și finalizată cu al doilea clic al mouse-ului. <BR>Dacă <B> "
#~ "Toate </B> este selectat, atunci Paint va începe după clic. <BR>Dacă <B> "
#~ "Ref </B> este selectat apoi pictarea va începe după clic, <BR>, iar zona "
#~ "pictată va fi descrisă de un obiect selectat. <BR>Un nou obiect Geometrie "
#~ "cu traseele uneltei va fi creat."

#~ msgid "<b>Apertures:</b>"
#~ msgstr "<b>Aperturi:</b>"

#~ msgid "Aperture Code:"
#~ msgstr "Cod apertură"

#~ msgid "<b>Languages:</b>"
#~ msgstr "<b>Traduceri:</b>"

#~ msgid "Width (# passes):"
#~ msgstr "Latime(# treceri):"

#~ msgid "Clear non-copper"
#~ msgstr "Curăță non-Cu"

#~ msgid "Rounded corners"
#~ msgstr "C. rotunjite"

#~ msgid ""
#~ "Creates a Geometry objects with polygons\n"
#~ "covering the copper-free areas of the PCB."
#~ msgstr ""
#~ "Crează un obiect tip Geometrie conținând poligoane\n"
#~ "care acopera toate suprafetele libere de cupru ale PCB-ului."

#~ msgid "<b>Bounding Box:</b>"
#~ msgstr "<b>Forma înconjurătoare::</b>"

#~ msgid "<b>Units</b>:"
#~ msgstr "<b>Unitati</b>:"

#~ msgid "<b>Zeros</b>:"
#~ msgstr "<b>Zero-uri</b>:"

#~ msgid "INCH:"
#~ msgstr "Inch"

#~ msgid "Tool change:"
#~ msgstr "Schimbare unealtă:"

#~ msgid "Toolchange Z position."
#~ msgstr ""
#~ "Înălţimea la care se efectuează schimbarea uneltei.\n"
#~ "Poate reprezenta Înălţimea unde se gaseste un\n"
#~ "'toolchanger' automat sau acolo unde utilizatorul\n"
#~ "schimba unealtă manual."

#~ msgid "Feedrate:"
#~ msgstr "Feedrate:"

#~ msgid ""
#~ "Tool speed while drilling\n"
#~ "(in units per minute)."
#~ msgstr ""
#~ "Viteza cu care se misca unealtă (burghiul) când se fac\n"
#~ "operațiuni de găurire. In unitati pe minut."

#~ msgid "<b>Gcode:    </b>"
#~ msgstr "<b>G-Code:</b>"

#~ msgid "Offset Z:"
#~ msgstr "Z ofset:"

#~ msgid "<b>Slots:</b>"
#~ msgstr "<b>Sloturi:</b>"

#~ msgid "<b>Create CNC Job:</b>"
#~ msgstr "<b>Crează CNCJob:</b>"

#~ msgid "Multidepth"
#~ msgstr "MultiPas"

#~ msgid "Multidepth usage: True or False."
#~ msgstr ""
#~ "Dacă se folosesc sau nu pasi multipli de tăiere\n"
#~ "pentru a ajunge la adâncimea de tăiere."

#~ msgid ""
#~ "The postprocessor file that dictates\n"
#~ "Machine Code output."
#~ msgstr ""
#~ "Un fişier care prelucrează codul G-Code astfel încât să\n"
#~ "respecte un anumit format care să fie ințeles de diverse\n"
#~ "utilaje. Este responsabil de 'personalizarea' G-Code."

#~ msgid "Display Annotation:"
#~ msgstr "Afiseaza notatii:"

#~ msgid ""
#~ "Type here any G-Code commands you would\n"
#~ "like to be executed when Toolchange event is encountered.\n"
#~ "This will constitute a Custom Toolchange GCode,\n"
#~ "or a Toolchange Macro."
#~ msgstr ""
#~ "Adaugă aici orice comenzi G-Code care se dorește să fie\n"
#~ "inserate in codul G-Code atunci când se intalneste comanda M6.\n"
#~ "Comanda M6 este inlocuita.\n"
#~ "Aceata va constitui un macro pentru schimbul uneltelor."

#~ msgid ""
#~ "If checked, use 'rest machining'.\n"
#~ "Basically it will clear copper outside PCB features,\n"
#~ "using the biggest tool and continue with the next tools,\n"
#~ "from bigger to smaller, to clear areas of copper that\n"
#~ "could not be cleared by previous tool.\n"
#~ "If not checked, use the standard algorithm."
#~ msgstr ""
#~ "Daca este bifat, foloste 'rest machining'.\n"
#~ "Mai exact, se va curăța cuprul din afara traseelor,\n"
#~ "folosind mai intai unealta cu diametrul cel mai mare\n"
#~ "apoi folosindu-se progresiv unelte cu diametrul tot\n"
#~ "mai mic, din cele disponibile in tabela de unelte, pt a\n"
#~ "curăța zonele care nu s-au putut curăța cu unealta\n"
#~ "precedenta.\n"
#~ "Daca nu este bifat, foloseşte algoritmul standard."

#~ msgid "Offset:"
#~ msgstr "Ofset:"

#~ msgid ""
#~ "Distance from objects at which\n"
#~ "to draw the cutout."
#~ msgstr "Distanta de obiecte la care să se deseneze forma taietoare."

#~ msgid ""
#~ "Size of the gaps in the toolpath\n"
#~ "that will remain to hold the\n"
#~ "board in place."
#~ msgstr ""
#~ "Dimensiunea punţilor in trecerile de tăiere\n"
#~ "care vor mentine PCB-ul in poziţie, fără să cada\n"
#~ "din placa 'mama' dupa decupare."

#~ msgid "Create a convex shape surrounding the entire PCB."
#~ msgstr ""
#~ "Generează un obiect tip Geometrie care va inconjura\n"
#~ "tot PCB-ul. Forma sa este convexa."

#~ msgid ""
#~ "The axis should pass through a <b>point</b> or cut\n"
#~ " a specified <b>box</b> (in a Geometry object) in \n"
#~ "the middle."
#~ msgstr ""
#~ "Axa de referinţă ar trebui să treaca printr-un <b>punct</b> ori să "
#~ "strabata\n"
#~ " o <b>forma</b> (specificata un obiect tip Geometrie) prin mijloc."

#~ msgid ""
#~ "How much (fraction) of the tool\n"
#~ "width to overlap each tool pass."
#~ msgstr ""
#~ "Cat de mult (o fracţie din diametrul uneltei) din diametrul uneltei,\n"
#~ "(lăţimea de tăiere) să se suprapună peste trecerea anterioară."

#~ msgid "Panel Type:"
#~ msgstr "Tip panel:"

#~ msgid "Tip angle:"
#~ msgstr "Unghiul la vârf:"

#~ msgid "Angle for rotation. In degrees."
#~ msgstr "Unnghiul pentru rotaţie. In grade."

#~ msgid "Angle for Skew/Shear on X axis. In degrees."
#~ msgstr "Unghiul pentru deformare pe axa X. In grade."

#~ msgid "Angle for Skew/Shear on Y axis. In degrees."
#~ msgstr "Unghiul pentru deformare pe axa Y. In grade."

#~ msgid "XY Toolchange:"
#~ msgstr "XY schimb unealtă:"

#~ msgid "PostProcessors:"
#~ msgstr "Postprocesoare:"

#~ msgid "<b>Scale:</b>"
#~ msgstr "<b>Scalează:</b>"

#~ msgid "<b>Offset:</b>"
#~ msgstr "<b>Ofset:</b>"

#~ msgid "Combine"
#~ msgstr "Combina"

#~ msgid "<b>Tools Table</b>"
#~ msgstr "<b>Tabela Unelte</b>"

#~ msgid ""
#~ "Tool height just before starting the work.\n"
#~ "Delete the value if you don't need this feature."
#~ msgstr ""
#~ "Înălţimea uneltei la inceputul lucrului.\n"
#~ "Seterge aceasta valoare daca nu este folosita."

#~ msgid ""
#~ "Z-axis position (height) for\n"
#~ "the last move."
#~ msgstr "Înălţimea, pe axa Z, la finalul lucrului."

#~ msgid ""
#~ "The json file that dictates\n"
#~ "gcode output."
#~ msgstr ""
#~ "Fişierul care dictează codul G-Code \n"
#~ "generat. In format JSON."

#~ msgid "<b>Type:    </b>"
#~ msgstr "<b>Tip:</b>"

#~ msgid "Drills Tool dia:"
#~ msgstr "Dia. Burghiu:"

#~ msgid "Slots Tool dia:"
#~ msgstr "Dia freza:"

#~ msgid "<b>Tool Dia:</b>"
#~ msgstr "<b>Dia unealtă:</b>"

#~ msgid "<b>Tool Data</b>"
#~ msgstr "<b>Date Unealtă</b>"

#~ msgid ""
#~ "This is the height (Z) at which the CNC\n"
#~ "will go as the last move."
#~ msgstr ""
#~ "Aceasta este înălţimea Z, la care CNC-ul \n"
#~ "va fi parcat la finalul de lucru."

#~ msgid "Feed Rate Z (Plunge):"
#~ msgstr "Feedrate Z (Plonjare):"

#~ msgid ""
#~ "Cutting speed in the Z\n"
#~ "plane in units per minute"
#~ msgstr ""
#~ "Viteza de tăiere in planul Z.\n"
#~ "In unitati pe minut."

#~ msgid ""
#~ "Cutting speed in the XY\n"
#~ "plane in units per minute\n"
#~ "(in units per minute).\n"
#~ "This is for the rapid move G00.\n"
#~ "It is useful only for Marlin,\n"
#~ "ignore for any other cases."
#~ msgstr ""
#~ "Viteza de găurire, in unitati pe minut.\n"
#~ "Corespunde comenzii G0 și este utila doar pentru\n"
#~ "printerul 3D Marlin, implicit când se foloseşte fişierul\n"
#~ "postprocesor: Marlin. Ignora aceasta parametru in rest."

#~ msgid "Cut over 1st pt"
#~ msgstr "Re-tăiere 1-ul pt."

#~ msgid "<b>Paint Area:</b>"
#~ msgstr "<b>Unealta Paint</b>"

#~ msgid "<b>CNC Tools Table</b>"
#~ msgstr "<b>Tabela Unelte CNC</b>"

#~ msgid ""
#~ "Type here any G-Code commands you would\n"
#~ "like to add to the beginning of the generated file."
#~ msgstr ""
#~ "Plasează aici acele comenzi GCode care se dorește să fie\n"
#~ "adaugate la inceputul codului masina CNC."

#~ msgid ""
#~ "This is the diameter of the tool tip.\n"
#~ "The manufacturer specifies it."
#~ msgstr ""
#~ "Acesta este diametrul uneltei la vârf.\n"
#~ "Producatorul il specifica in foaia de catalog."

#~ msgid "Object:"
#~ msgstr "Obiect:"

#~ msgid "Units:"
#~ msgstr "Unităti:"

#~ msgid ""
#~ "- 'Itself': the non copper clearing extent\n"
#~ "is based on the object that is copper cleared.\n"
#~ " - 'Box': will do non copper clearing within the box\n"
#~ "specified by the object selected in the Ref. Object combobox."
#~ msgstr ""
#~ "- „Însuși”: intinderea suprafeței de curățare a cuprului\n"
#~ "se bazează pe obiectul care este curățat de cupru.\n"
#~ "- „Cutie”: va efectua o curățare de cupru în suprafața\n"
#~ "specificată de obiectul selectat în combobox-ul Obiect Ref.."

#~ msgid "Geometry:"
#~ msgstr "Geometrie:"

#~ msgid ""
#~ "Scale the selected object(s)\n"
#~ "using the Scale Factor X for both axis."
#~ msgstr ""
#~ "Scalează obiectele selectate\n"
#~ "folosind Factor X de scalare pentru\n"
#~ "ambele axe."

#~ msgid "<b>Excellon Format:</b>"
#~ msgstr "<b>Formatul Excellon</b>"

#~ msgid "<b>Tools:</b>"
#~ msgstr "<b>Unelte:</b>"

#~ msgid "<b>Export G-Code:</b>"
#~ msgstr "<b>Exporta G-Code:</b>"

#~ msgid "How to select the polygons to paint."
#~ msgstr "Cum să se selecteze poligoanele de pictat (paint)."

#~ msgid "<b>V-Shape Tool Calculator:</b>"
#~ msgstr "<b>Calculator: Unealta V-shape</b>"

#~ msgid "<b>ElectroPlating Calculator:</b>"
#~ msgstr "<b>Calculator Electroplacare:</b>"

#~ msgid "<b>Name:</b>"
#~ msgstr "<b>Nume:</b>"

#~ msgid "<b>Plot kind:</b>"
#~ msgstr "<b>Afișare:</b>"

#~ msgid "<b>Display Annotation:</b>"
#~ msgstr "<b>Afișare notatii:</b>"

#~ msgid "<b>GERBER:</b>"
#~ msgstr "<b>GERBER:</b>"

#~ msgid "<b>EXCELLON:</b>"
#~ msgstr "<b>EXCELLON:</b>"

#~ msgid "<b>GEOMETRY</b>:"
#~ msgstr "<b>GEOMETRIE</b>:"

#~ msgid "<b>Panel Type:</b>"
#~ msgstr "<b>Tip panel:</b>"

#~ msgid "<b>Excellon format:</b>"
#~ msgstr "<b>Formatul Excellon</b>"

#~ msgid "<b>Gerber Objects</b>"
#~ msgstr "<b>Obiect Gerber</b>"

#~ msgid "<b>Geometry Objects</b>"
#~ msgstr "<b>Obiecte Geometrie</b>"

#~ msgid "Save &Defaults"
#~ msgstr "Salvează valori &Default"

#~ msgid "Line"
#~ msgstr "Linie"

#~ msgid "Tool dia:                   "
#~ msgstr "Dia Unealtă:"

#~ msgid ""
#~ "The diameter of the cutting\n"
#~ "tool.."
#~ msgstr "Diametrul uneltei taietoare ..."

#~ msgid "Disable"
#~ msgstr "Dezactivează"

#~ msgid "[WARNING_NOTCL] Move cancelled. No shape selected."
#~ msgstr "[WARNING_NOTCL] Mutare anulata. Nici-o forma nu este selectată."

#~ msgid "Click on the Destination point..."
#~ msgstr "Click pe punctul de Destinaţie ..."

#~ msgid "Copy as &Geom"
#~ msgstr "Copiază ca &Geo"

#~ msgid "Ap. Scale Factor:"
#~ msgstr "Factor scalare ap.:"

#~ msgid ""
#~ "Change the size of the selected apertures.\n"
#~ "Factor by which to multiply\n"
#~ "geometric features of this object."
#~ msgstr ""
#~ "Schimbă dimensiunea aperturilor selectate.\n"
#~ "Factor cu care se multiplica geometriile\n"
#~ "acestui obiect."

#~ msgid "Ap. Buffer Factor:"
#~ msgstr "Factor bufer ap.:"

#~ msgid ""
#~ "Change the size of the selected apertures.\n"
#~ "Factor by which to expand/shrink\n"
#~ "geometric features of this object."
#~ msgstr ""
#~ "Schimbă dimensiunea aperturilor selectate.\n"
#~ "Valoare cu care se mareste/micsorează\n"
#~ "geometriile acestui obiect."

#~ msgid "In"
#~ msgstr "În"

#~ msgid "Out"
#~ msgstr "Afară"

#~ msgid "Custom"
#~ msgstr "Personalizat"

#~ msgid "Both"
#~ msgstr "Ambele"

#~ msgid "Pos"
#~ msgstr "Pozitiv"

#~ msgid "Neg"
#~ msgstr "Negativ"

#~ msgid "Solid   "
#~ msgstr "Solid"

#~ msgid "M-Color   "
#~ msgstr "M-Color   "

#~ msgid "Click on CENTER ..."
#~ msgstr "Click in Centru ..."

#~ msgid "[success] Done. Region completed."
#~ msgstr "[success] Executat. Adăugarea unei Regiuni terminată."

#~ msgid "Del Aperture:"
#~ msgstr "Șterge apertura:"

#~ msgid ""
#~ "Delete a aperture in the aperture list.\n"
#~ "It will delete also the associated geometry."
#~ msgstr ""
#~ "Sterge o apertură in lista de aperturi.\n"
#~ "Va sterge si geometriile asociate."

#~ msgid ""
#~ "[ERROR_NOTCL] The aperture scale factor value is missing or wrong format."
#~ msgstr ""
#~ "[ERROR_NOTCL] Factorul de scalare a aperturii lipseste sau este in format "
#~ "gresit."

#~ msgid ""
#~ "<b>Editor Shortcut list</b><br>\n"
#~ "            <br>\n"
#~ "            <strong><span style=\"color:#0000ff\">GEOMETRY EDITOR</span></"
#~ "strong><br>\n"
#~ "    \n"
#~ "            <table border=\"0\" cellpadding=\"0\" cellspacing=\"0\" style="
#~ "\"width:283px\">\n"
#~ "                <tbody>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\" width=\"89\"><strong>A</"
#~ "strong></td>\n"
#~ "                        <td width=\"194\">&nbsp;Draw an Arc</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>B</strong></td>\n"
#~ "                        <td>&nbsp;Buffer Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>C</strong></td>\n"
#~ "                        <td>&nbsp;Copy Geo Item</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>E</strong></td>\n"
#~ "                        <td>&nbsp;Polygon Intersection Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>I</strong></td>\n"
#~ "                        <td>&nbsp;Paint Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>J</strong></td>\n"
#~ "                        <td>&nbsp;Jump to Location (x, y)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>K</strong></td>\n"
#~ "                        <td>&nbsp;Toggle Corner Snap</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>M</strong></td>\n"
#~ "                        <td>&nbsp;Move Geo Item</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>N</strong></td>\n"
#~ "                        <td>&nbsp;Draw a Polygon</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>O</strong></td>\n"
#~ "                        <td>&nbsp;Draw a Circle</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>P</strong></td>\n"
#~ "                        <td>&nbsp;Draw a Path</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>R</strong></td>\n"
#~ "                        <td>&nbsp;Draw Rectangle</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>S</strong></td>\n"
#~ "                        <td>&nbsp;Polygon Substraction Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>T</strong></td>\n"
#~ "                        <td>&nbsp;Add Text Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>U</strong></td>\n"
#~ "                        <td>&nbsp;Polygon Union Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>X</strong></td>\n"
#~ "                        <td>&nbsp;Flip shape on X axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Y</strong></td>\n"
#~ "                        <td>&nbsp;Flip shape on Y axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>SHIFT+X</strong></td>\n"
#~ "                        <td>&nbsp;Skew shape on X axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>SHIFT+Y</strong></td>\n"
#~ "                        <td>&nbsp;Skew shape on Y axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+R</strong></td>\n"
#~ "                        <td>&nbsp;Editor Transformation Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+X</strong></td>\n"
#~ "                        <td>&nbsp;Offset shape on X axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+Y</strong></td>\n"
#~ "                        <td>&nbsp;Offset shape on Y axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>CTRL+M</strong></td>\n"
#~ "                        <td>&nbsp;Measurement Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>CTRL+S</strong></td>\n"
#~ "                        <td>&nbsp;Save Object and Exit Editor</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>CTRL+X</strong></td>\n"
#~ "                        <td>&nbsp;Polygon Cut Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Space</strong></td>\n"
#~ "                        <td>&nbsp;Rotate Geometry</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ENTER</strong></td>\n"
#~ "                        <td>&nbsp;Finish drawing for certain tools</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ESC</strong></td>\n"
#~ "                        <td>&nbsp;Abort and return to Select</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Del</strong></td>\n"
#~ "                        <td>&nbsp;Delete Shape</td>\n"
#~ "                    </tr>\n"
#~ "                </tbody>\n"
#~ "            </table>\n"
#~ "            <br>\n"
#~ "            <br>\n"
#~ "            <strong><span style=\"color:#ff0000\">EXCELLON EDITOR</span></"
#~ "strong><br>\n"
#~ "            <table border=\"0\" cellpadding=\"0\" cellspacing=\"0\" style="
#~ "\"width:283px\">\n"
#~ "                <tbody>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\" width=\"89\"><strong>A</"
#~ "strong></td>\n"
#~ "                        <td width=\"194\">&nbsp;Add Drill Array</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>C</strong></td>\n"
#~ "                        <td>&nbsp;Copy Drill(s)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>D</strong></td>\n"
#~ "                        <td>&nbsp;Add Drill</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>J</strong></td>\n"
#~ "                        <td>&nbsp;Jump to Location (x, y)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>M</strong></td>\n"
#~ "                        <td>&nbsp;Move Drill(s)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>R</strong></td>\n"
#~ "                        <td>&nbsp;Resize Drill(s)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>T</strong></td>\n"
#~ "                        <td>&nbsp;Add a new Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Del</strong></td>\n"
#~ "                        <td>&nbsp;Delete Drill(s)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Del</strong></td>\n"
#~ "                        <td>&nbsp;Alternate: Delete Tool(s)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ESC</strong></td>\n"
#~ "                        <td>&nbsp;Abort and return to Select</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>CTRL+S</strong></td>\n"
#~ "                        <td>&nbsp;Save Object and Exit Editor</td>\n"
#~ "                    </tr>\n"
#~ "                </tbody>\n"
#~ "            </table>\n"
#~ "                    "
#~ msgstr ""
#~ "<b>Editor Shortcut list</b><br>\n"
#~ "            <br>\n"
#~ "            <strong><span style=\"color:#0000ff\">EDITORUL DE GEOMETRII</"
#~ "span></strong><br>\n"
#~ "    \n"
#~ "            <table border=\"0\" cellpadding=\"0\" cellspacing=\"0\" style="
#~ "\"width:283px\">\n"
#~ "                <tbody>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\" width=\"89\"><strong>A</"
#~ "strong></td>\n"
#~ "                        <td width=\"194\">&nbsp;Desenează un Arc</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>B</strong></td>\n"
#~ "                        <td>&nbsp;Unealta Bufer</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>C</strong></td>\n"
#~ "                        <td>&nbsp;Copiaza o geometrie</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>E</strong></td>\n"
#~ "                        <td>&nbsp;Unealta Intersecţie Poligoane</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>I</strong></td>\n"
#~ "                        <td>&nbsp;Unealta Paint</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>J</strong></td>\n"
#~ "                        <td>&nbsp;Sari la Locaţie (x, y)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>K</strong></td>\n"
#~ "                        <td>&nbsp;Comuta lipire colt</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>M</strong></td>\n"
#~ "                        <td>&nbsp;Muta forma geometrică</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>N</strong></td>\n"
#~ "                        <td>&nbsp;Desenează un Poligon</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>O</strong></td>\n"
#~ "                        <td>&nbsp;Desenează un Cerc</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>P</strong></td>\n"
#~ "                        <td>&nbsp;Desenează o Cale</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>R</strong></td>\n"
#~ "                        <td>&nbsp;Desenează un Patrulater</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>S</strong></td>\n"
#~ "                        <td>&nbsp;Unealta Substracţie Poligoane</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>T</strong></td>\n"
#~ "                        <td>&nbsp;Unealta de adaugare Text</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>U</strong></td>\n"
#~ "                        <td>&nbsp;Unealta de Uniune Poligoane</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>X</strong></td>\n"
#~ "                        <td>&nbsp;Oglindește forma geo pe axa X</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Y</strong></td>\n"
#~ "                        <td>&nbsp;Oglindește forma geo pe axa Y</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>SHIFT+X</strong></td>\n"
#~ "                        <td>&nbsp;Deformează forma geo pe axa X/td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>SHIFT+Y</strong></td>\n"
#~ "                        <td>&nbsp;Deformează forma geo pe axa Y</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+R</strong></td>\n"
#~ "                        <td>&nbsp;Unealta de Trasformări din Editor</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+X</strong></td>\n"
#~ "                        <td>&nbsp;Deplasează forma geo pe axa X</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+Y</strong></td>\n"
#~ "                        <td>&nbsp;Deplasează forma geo pe axa Y</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>CTRL+M</strong></td>\n"
#~ "                        <td>&nbsp;Unealta de Masurare</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>CTRL+S</strong></td>\n"
#~ "                        <td>&nbsp;Salvează obiectul și ieși din Editor</"
#~ "td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>CTRL+X</strong></td>\n"
#~ "                        <td>&nbsp;Unealta de tăiere Poligoane</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Space</strong></td>\n"
#~ "                        <td>&nbsp;Roteste forma geometrică</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ENTER</strong></td>\n"
#~ "                        <td>&nbsp;Termina desenatul pentru anumite "
#~ "unelte</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ESC</strong></td>\n"
#~ "                        <td>&nbsp;Renunta și intoarce-te la Select</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Del</strong></td>\n"
#~ "                        <td>&nbsp;Șterge forma geometrică</td>\n"
#~ "                    </tr>\n"
#~ "                </tbody>\n"
#~ "            </table>\n"
#~ "            <br>\n"
#~ "            <br>\n"
#~ "            <strong><span style=\"color:#ff0000\">EDITORUL EXCELLON</"
#~ "span></strong><br>\n"
#~ "            <table border=\"0\" cellpadding=\"0\" cellspacing=\"0\" style="
#~ "\"width:283px\">\n"
#~ "                <tbody>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\" width=\"89\"><strong>A</"
#~ "strong></td>\n"
#~ "                        <td width=\"194\">&nbsp;Adaugă o arie de găuriri</"
#~ "td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>C</strong></td>\n"
#~ "                        <td>&nbsp;Copiaza Găuriri</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>D</strong></td>\n"
#~ "                        <td>&nbsp;Adaugă găurire</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>J</strong></td>\n"
#~ "                        <td>&nbsp;Sari la Locaţie (x, y)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>M</strong></td>\n"
#~ "                        <td>&nbsp;Muta Găuriri</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>R</strong></td>\n"
#~ "                        <td>&nbsp;Redimensionează găuriri</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>T</strong></td>\n"
#~ "                        <td>&nbsp;Adaugă o noua Unealta</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Del</strong></td>\n"
#~ "                        <td>&nbsp;Șterge Găuriri</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Del</strong></td>\n"
#~ "                        <td>&nbsp;Alternatic: Șterge Unelte</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ESC</strong></td>\n"
#~ "                        <td>&nbsp;Renunta și intoarce-te la Select</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>CTRL+S</strong></td>\n"
#~ "                        <td>&nbsp;Salvează obiectul și ieși din Editor</"
#~ "td>\n"
#~ "                    </tr>\n"
#~ "                </tbody>\n"
#~ "            </table>\n"
#~ "                    "

#~ msgid "Save && Close Edit"
#~ msgstr "Salvează && Inchide Edit"

#~ msgid "[success] GUI settings deleted ..."
#~ msgstr "[success] Setarile GUI au fost șterse ..."

#~ msgid "Scale Factor:"
#~ msgstr "Factor scalare:"

#~ msgid "Perform scaling operation on the selected apertures."
#~ msgstr "Efectuează operatia de scalare pt aperturile selectate."

#~ msgid "Buffer Factor:"
#~ msgstr "Factor bufer:"

#~ msgid "Perform buffer operation on the selected apertures."
#~ msgstr "Efectuează operatia de bufer pt aperturile selectate."

#~ msgid "<b>Generate new Gerber Object:</b>"
#~ msgstr "<b>Crează un nou obiect Gerber::</b>"

#~ msgid "Will generate a new Gerber object from the changed apertures."
#~ msgstr "Va crea un nou obiect tip Gerber din aperturile modificate."

#~ msgid ""
#~ "Will generate a new Gerber object from the changed apertures.\n"
#~ "This new object can then be isolated etc."
#~ msgstr ""
#~ "Va genera un nou obiect Gerber din aperturile modificate.\n"
#~ "Acest nou obiect poate fi izolat etc."

#~ msgid "[ERROR_NOTCL]Could not load defaults file."
#~ msgstr ""
#~ "[ERROR_NOTCL] Nu a fost posibila incarcarea fişierului cu valori default."

#~ msgid "[WARNING_NOTCL]Export Machine Code cancelled ..."
#~ msgstr "[WARNING_NOTCL] Exportul de cod CNC a fost anulat ..."

#~ msgid "[success]Offset on the %s axis done ..."
#~ msgstr "[success] Deplasarea de axa %s executată."

#~ msgid ""
#~ "How much (fraction) of the tool width to overlap each tool pass.\n"
#~ "Example:\n"
#~ "A value here of 0.25 means 25\\% from the tool diameter found above.\n"
#~ "\n"
#~ "Adjust the value starting with lower values\n"
#~ "and increasing it if areas that should be painted are still \n"
#~ "not painted.\n"
#~ "Lower values = faster processing, faster execution on PCB.\n"
#~ "Higher values = slow processing and slow execution on CNC\n"
#~ "due of too many paths."
#~ msgstr ""
#~ "Cat de mult (fractie) din diametrul uneltei sa se suprapuna la fiecare "
#~ "trecere a uneltei.\n"
#~ "Exemplu:\n"
#~ "O valoare aici de 0.25 inseamna 25\\% din diametrul uneltei de mai sus.\n"
#~ "\n"
#~ "Ajusteaza valoarea incepand de la valori mici si pe urma creste daca "
#~ "ariile care ar trebui\n"
#~ " >pictate< inca nu sunt procesate.\n"
#~ "Valori scazute = procesare rapida,executie rapida a PCB-ului.\n"
#~ "Valori mari= procesare lenta cat si o executie la fel de lenta a PCB-"
#~ "ului,\n"
#~ "datorita numarului mai mare de treceri-taiere."

#, fuzzy
#~| msgid "z_toolchange = Z coord for Toolchange"
#~ msgid "z_move = Z coord for Toolchange"
#~ msgstr "z_toolchange = Z coord for Toolchange"

#~ msgid "%s/Project_%s"
#~ msgstr "%s/Proiect_%s"

#~ msgid "tool_tab"
#~ msgstr "tool_tab"