FlatCAM/locale/en/LC_MESSAGES/strings.po

# SOME DESCRIPTIVE TITLE.
# Copyright (C) YEAR ORGANIZATION
# FIRST AUTHOR <EMAIL@ADDRESS>, YEAR.
#
msgid ""
msgstr ""
"Project-Id-Version: \n"
"POT-Creation-Date: 2020-10-08 15:40+0300\n"
"PO-Revision-Date: 2020-10-08 15:40+0300\n"
"Last-Translator: \n"
"Language-Team: \n"
"Language: en\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Generated-By: pygettext.py 1.5\n"
"X-Generator: Poedit 2.3.1\n"
"Plural-Forms: nplurals=2; plural=(n != 1);\n"
"X-Poedit-Basepath: ../../..\n"
"X-Poedit-SearchPath-0: .\n"
"X-Poedit-SearchPathExcluded-0: build\n"
"X-Poedit-SearchPathExcluded-1: doc\n"
"X-Poedit-SearchPathExcluded-2: tests\n"

#: Bookmark.py:57 Bookmark.py:84
msgid "Title"
msgstr "Title"

#: Bookmark.py:58 Bookmark.py:88
msgid "Web Link"
msgstr "Web Link"

#: Bookmark.py:62
msgid ""
"Index.\n"
"The rows in gray color will populate the Bookmarks menu.\n"
"The number of gray colored rows is set in Preferences."
msgstr ""
"Index.\n"
"The rows in gray color will populate the Bookmarks menu.\n"
"The number of gray colored rows is set in Preferences."

#: Bookmark.py:66
msgid ""
"Description of the link that is set as an menu action.\n"
"Try to keep it short because it is installed as a menu item."
msgstr ""
"Description of the link that is set as an menu action.\n"
"Try to keep it short because it is installed as a menu item."

#: Bookmark.py:69
msgid "Web Link. E.g: https://your_website.org "
msgstr "Web Link. E.g: https://your_website.org "

#: Bookmark.py:78
msgid "New Bookmark"
msgstr "New Bookmark"

#: Bookmark.py:97
msgid "Add Entry"
msgstr "Add Entry"

#: Bookmark.py:98
msgid "Remove Entry"
msgstr "Remove Entry"

#: Bookmark.py:99
msgid "Export List"
msgstr "Export List"

#: Bookmark.py:100
msgid "Import List"
msgstr "Import List"

#: Bookmark.py:190
msgid "Title entry is empty."
msgstr "Title entry is empty."

#: Bookmark.py:199
msgid "Web link entry is empty."
msgstr "Web link entry is empty."

#: Bookmark.py:207
msgid "Either the Title or the Weblink already in the table."
msgstr "Either the Title or the Weblink already in the table."

#: Bookmark.py:227
msgid "Bookmark added."
msgstr "Bookmark added."

#: Bookmark.py:244
msgid "This bookmark can not be removed"
msgstr "This bookmark can not be removed"

#: Bookmark.py:275
msgid "Bookmark removed."
msgstr "Bookmark removed."

#: Bookmark.py:290
msgid "Export Bookmarks"
msgstr "Export Bookmarks"

#: Bookmark.py:293 appGUI/MainGUI.py:524
msgid "Bookmarks"
msgstr "Bookmarks"

#: Bookmark.py:300 Bookmark.py:342 appDatabase.py:665 appDatabase.py:711
#: appDatabase.py:2998 appDatabase.py:3044 appEditors/AppExcEditor.py:1023
#: appEditors/AppExcEditor.py:1091 appEditors/AppTextEditor.py:263
#: appGUI/MainGUI.py:2878 appGUI/MainGUI.py:3100 appGUI/MainGUI.py:3315
#: appObjects/FlatCAMCNCJob.py:1716 appObjects/ObjectCollection.py:126
#: appTools/ToolFilm.py:238 appTools/ToolFilm.py:384 appTools/ToolImage.py:112
#: appTools/ToolMove.py:269 appTools/ToolPcbWizard.py:189
#: appTools/ToolPcbWizard.py:212 appTools/ToolQRCode.py:527
#: appTools/ToolQRCode.py:574 app_Main.py:1747 app_Main.py:2575
#: app_Main.py:2611 app_Main.py:2658 app_Main.py:4404 app_Main.py:7122
#: app_Main.py:7161 app_Main.py:7205 app_Main.py:7234 app_Main.py:7275
#: app_Main.py:7300 app_Main.py:7356 app_Main.py:7392 app_Main.py:7437
#: app_Main.py:7478 app_Main.py:7520 app_Main.py:7562 app_Main.py:7603
#: app_Main.py:7647 app_Main.py:7707 app_Main.py:7739 app_Main.py:7771
#: app_Main.py:7994 app_Main.py:8032 app_Main.py:8075 app_Main.py:8152
#: app_Main.py:8207
msgid "Cancelled."
msgstr "Cancelled."

#: Bookmark.py:308 appDatabase.py:673 appDatabase.py:3006
#: appEditors/AppTextEditor.py:318 appObjects/FlatCAMCNCJob.py:1638
#: appObjects/FlatCAMCNCJob.py:1828 appObjects/FlatCAMCNCJob.py:2277
#: appTools/ToolFilm.py:582 appTools/ToolFilm.py:830
#: appTools/ToolSolderPaste.py:1097 app_Main.py:2666 app_Main.py:8451
#: app_Main.py:8499 app_Main.py:8628 app_Main.py:8765 app_Main.py:8833
msgid ""
"Permission denied, saving not possible.\n"
"Most likely another app is holding the file open and not accessible."
msgstr ""
"Permission denied, saving not possible.\n"
"Most likely another app is holding the file open and not accessible."

#: Bookmark.py:319 Bookmark.py:349
msgid "Could not load bookmarks file."
msgstr "Could not load bookmarks file."

#: Bookmark.py:329
msgid "Failed to write bookmarks to file."
msgstr "Failed to write bookmarks to file."

#: Bookmark.py:331
msgid "Exported bookmarks to"
msgstr "Exported bookmarks to"

#: Bookmark.py:337
msgid "Import Bookmarks"
msgstr "Import Bookmarks"

#: Bookmark.py:356
msgid "Imported Bookmarks from"
msgstr "Imported Bookmarks from"

#: appCommon/Common.py:46
msgid "The user requested a graceful exit of the current task."
msgstr "The user requested a graceful exit of the current task."

#: appCommon/Common.py:292 appTools/ToolCopperThieving.py:328
#: appTools/ToolIsolation.py:1398 appTools/ToolNCC.py:1316
msgid "Click the start point of the area."
msgstr "Click the start point of the area."

#: appCommon/Common.py:351 appTools/ToolNCC.py:1375 appTools/ToolPaint.py:1209
msgid "Click the end point of the area."
msgstr "Click the end point of the area."

#: appCommon/Common.py:357 appCommon/Common.py:459
#: appTools/ToolCopperThieving.py:385 appTools/ToolIsolation.py:2310
#: appTools/ToolIsolation.py:2362 appTools/ToolNCC.py:1381
#: appTools/ToolNCC.py:1433 appTools/ToolPaint.py:1215
#: appTools/ToolPaint.py:1266
msgid "Zone added. Click to start adding next zone or right click to finish."
msgstr "Zone added. Click to start adding next zone or right click to finish."

#: appCommon/Common.py:404 appEditors/AppGeoEditor.py:2352
#: appTools/ToolIsolation.py:2333 appTools/ToolNCC.py:1404
#: appTools/ToolPaint.py:1237
msgid "Click on next Point or click right mouse button to complete ..."
msgstr "Click on next Point or click right mouse button to complete ..."

#: appCommon/Common.py:490
msgid "Exclusion areas added. Checking overlap with the object geometry ..."
msgstr "Exclusion areas added. Checking overlap with the object geometry ..."

#: appCommon/Common.py:496
msgid "Failed. Exclusion areas intersects the object geometry ..."
msgstr "Failed. Exclusion areas intersects the object geometry ..."

#: appCommon/Common.py:499
msgid "Exclusion areas added."
msgstr "Exclusion areas added."

#: appCommon/Common.py:508 appCommon/Common.py:641 appCommon/Common.py:703
msgid "Generate the CNC Job object."
msgstr "Generate the CNC Job object."

#: appCommon/Common.py:508
msgid "With Exclusion areas."
msgstr "With Exclusion areas."

#: appCommon/Common.py:543
msgid "Cancelled. Area exclusion drawing was interrupted."
msgstr "Cancelled. Area exclusion drawing was interrupted."

#: appCommon/Common.py:651 appCommon/Common.py:706
msgid "All exclusion zones deleted."
msgstr "All exclusion zones deleted."

#: appCommon/Common.py:692
msgid "Selected exclusion zones deleted."
msgstr "Selected exclusion zones deleted."

#: appDatabase.py:88
msgid "Add Geometry Tool in DB"
msgstr "Add Geometry Tool in DB"

#: appDatabase.py:90 appDatabase.py:2224
msgid ""
"Add a new tool in the Tools Database.\n"
"It will be used in the Geometry UI.\n"
"You can edit it after it is added."
msgstr ""
"Add a new tool in the Tools Database.\n"
"It will be used in the Geometry UI.\n"
"You can edit it after it is added."

#: appDatabase.py:104 appDatabase.py:2238
msgid "Delete Tool from DB"
msgstr "Delete Tool from DB"

#: appDatabase.py:106 appDatabase.py:2241
msgid "Remove a selection of tools in the Tools Database."
msgstr "Remove a selection of tools in the Tools Database."

#: appDatabase.py:110 appDatabase.py:2245
msgid "Export DB"
msgstr "Export DB"

#: appDatabase.py:112 appDatabase.py:2248
msgid "Save the Tools Database to a custom text file."
msgstr "Save the Tools Database to a custom text file."

#: appDatabase.py:116 appDatabase.py:2252
msgid "Import DB"
msgstr "Import DB"

#: appDatabase.py:118 appDatabase.py:2255
msgid "Load the Tools Database information's from a custom text file."
msgstr "Load the Tools Database information's from a custom text file."

#: appDatabase.py:122 appDatabase.py:2266
msgid "Transfer the Tool"
msgstr "Transfer the Tool"

#: appDatabase.py:124
msgid ""
"Add a new tool in the Tools Table of the\n"
"active Geometry object after selecting a tool\n"
"in the Tools Database."
msgstr ""
"Add a new tool in the Tools Table of the\n"
"active Geometry object after selecting a tool\n"
"in the Tools Database."

#: appDatabase.py:130 appDatabase.py:2281 appGUI/MainGUI.py:1438
#: appGUI/preferences/PreferencesUIManager.py:924 app_Main.py:2291
#: app_Main.py:3386 app_Main.py:4341 app_Main.py:4587 app_Main.py:6895
msgid "Cancel"
msgstr "Cancel"

#: appDatabase.py:160 appDatabase.py:835
msgid "Tool Name"
msgstr "Tool Name"

#: appDatabase.py:161 appDatabase.py:837 appEditors/AppExcEditor.py:3765
#: appGUI/ObjectUI.py:692 appGUI/ObjectUI.py:958 appGUI/ObjectUI.py:1526
#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:132
#: appTools/ToolCutOut.py:2058 appTools/ToolIsolation.py:3053
#: appTools/ToolNCC.py:3858 appTools/ToolNCC.py:3869 appTools/ToolPaint.py:2881
msgid "Tool Dia"
msgstr "Tool Dia"

#: appDatabase.py:162 appDatabase.py:839 appDatabase.py:1273
#: appGUI/ObjectUI.py:933
msgid "Tool Offset"
msgstr "Tool Offset"

#: appDatabase.py:163 appDatabase.py:841 appDatabase.py:1290
msgid "Custom Offset"
msgstr "Custom Offset"

#: appDatabase.py:164 appDatabase.py:843 appDatabase.py:1257
#: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:70
#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:53
#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:62
#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:72
msgid "Tool Type"
msgstr "Tool Type"

#: appDatabase.py:165 appDatabase.py:845
msgid "Tool Shape"
msgstr "Tool Shape"

#: appDatabase.py:166 appDatabase.py:848 appDatabase.py:1309
#: appDatabase.py:1834 appEditors/appGCodeEditor.py:703 appGUI/ObjectUI.py:1089
#: appGUI/ObjectUI.py:1856
#: appGUI/preferences/geometry/GeometryOptPrefGroupUI.py:49
#: appGUI/preferences/tools/ToolsCalculatorsPrefGroupUI.py:78
#: appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:58
#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:57
#: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:115
#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:98
#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:105
#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:113
#: appTools/ToolCalculators.py:240 appTools/ToolCutOut.py:2102
#: appTools/ToolDrilling.py:2143 appTools/ToolMilling.py:1793
msgid "Cut Z"
msgstr "Cut Z"

#: appDatabase.py:167 appDatabase.py:850 appDatabase.py:1323
#: appDatabase.py:1871
msgid "MultiDepth"
msgstr "MultiDepth"

#: appDatabase.py:168 appDatabase.py:852 appDatabase.py:1336
#: appDatabase.py:1887
msgid "DPP"
msgstr "DPP"

#: appDatabase.py:169 appDatabase.py:854 appDatabase.py:1224
msgid "V-Dia"
msgstr "V-Dia"

#: appDatabase.py:170 appDatabase.py:856 appDatabase.py:1238
msgid "V-Angle"
msgstr "V-Angle"

#: appDatabase.py:171 appDatabase.py:858 appDatabase.py:1350
#: appDatabase.py:1903 appGUI/ObjectUI.py:1136
#: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:198
#: appGUI/preferences/geometry/GeometryOptPrefGroupUI.py:102
#: appGUI/preferences/tools/Tools2CalPrefGroupUI.py:61
#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:98
#: appObjects/FlatCAMGeometry.py:1745 appTools/ToolCalibration.py:769
#: appTools/ToolDrilling.py:1294 appTools/ToolDrilling.py:2189
#: appTools/ToolMilling.py:1291 appTools/ToolMilling.py:1839
msgid "Travel Z"
msgstr "Travel Z"

#: appDatabase.py:172 appDatabase.py:860
msgid "FR"
msgstr "FR"

#: appDatabase.py:173 appDatabase.py:862
msgid "FR Z"
msgstr "FR Z"

#: appDatabase.py:174 appDatabase.py:864 appDatabase.py:1431
msgid "FR Rapids"
msgstr "FR Rapids"

#: appDatabase.py:175 appDatabase.py:866 appDatabase.py:1452
#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:186
msgid "Spindle Speed"
msgstr "Spindle Speed"

#: appDatabase.py:176 appDatabase.py:868 appDatabase.py:1467
#: appDatabase.py:1984 appGUI/ObjectUI.py:1243 appTools/ToolDrilling.py:2264
#: appTools/ToolMilling.py:1957
msgid "Dwell"
msgstr "Dwell"

#: appDatabase.py:177 appDatabase.py:870 appDatabase.py:1480
#: appDatabase.py:1997
msgid "Dwelltime"
msgstr "Dwelltime"

#: appDatabase.py:178 appDatabase.py:872 appGUI/ObjectUI.py:1402
#: appGUI/preferences/geometry/GeometryOptPrefGroupUI.py:255
#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:221
#: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:237
#: appTools/ToolDrilling.py:2498 appTools/ToolSolderPaste.py:1407
msgid "Preprocessor"
msgstr "Preprocessor"

#: appDatabase.py:179 appDatabase.py:874 appDatabase.py:1365
msgid "ExtraCut"
msgstr "ExtraCut"

#: appDatabase.py:180 appDatabase.py:876 appDatabase.py:1380
msgid "E-Cut Length"
msgstr "E-Cut Length"

#: appDatabase.py:181 appDatabase.py:878
msgid "Toolchange"
msgstr "Toolchange"

#: appDatabase.py:182 appDatabase.py:880
msgid "Toolchange XY"
msgstr "Toolchange XY"

#: appDatabase.py:183 appDatabase.py:882
#: appGUI/preferences/geometry/GeometryOptPrefGroupUI.py:132
#: appGUI/preferences/tools/Tools2CalPrefGroupUI.py:98
#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:124
#: appTools/ToolCalibration.py:806
msgid "Toolchange Z"
msgstr "Toolchange Z"

#: appDatabase.py:184 appDatabase.py:884
#: appGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:56
#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:306
#: appTools/ToolDrilling.py:2415 appTools/ToolMilling.py:2087
msgid "Start Z"
msgstr "Start Z"

#: appDatabase.py:185 appDatabase.py:887
msgid "End Z"
msgstr "End Z"

#: appDatabase.py:189
msgid "Tool Index."
msgstr "Tool Index."

#: appDatabase.py:191 appDatabase.py:1126
msgid ""
"Tool name.\n"
"This is not used in the app, it's function\n"
"is to serve as a note for the user."
msgstr ""
"Tool name.\n"
"This is not used in the app, it's function\n"
"is to serve as a note for the user."

#: appDatabase.py:195 appDatabase.py:1139
msgid "Tool Diameter."
msgstr "Tool Diameter."

#: appDatabase.py:197 appDatabase.py:1275
msgid ""
"Tool Offset.\n"
"Can be of a few types:\n"
"Path = zero offset\n"
"In = offset inside by half of tool diameter\n"
"Out = offset outside by half of tool diameter\n"
"Custom = custom offset using the Custom Offset value"
msgstr ""
"Tool Offset.\n"
"Can be of a few types:\n"
"Path = zero offset\n"
"In = offset inside by half of tool diameter\n"
"Out = offset outside by half of tool diameter\n"
"Custom = custom offset using the Custom Offset value"

#: appDatabase.py:204 appDatabase.py:1292
msgid ""
"Custom Offset.\n"
"A value to be used as offset from the current path."
msgstr ""
"Custom Offset.\n"
"A value to be used as offset from the current path."

#: appDatabase.py:207 appDatabase.py:1259
msgid ""
"Tool Type.\n"
"Can be:\n"
"Iso = isolation cut\n"
"Rough = rough cut, low feedrate, multiple passes\n"
"Finish = finishing cut, high feedrate"
msgstr ""
"Tool Type.\n"
"Can be:\n"
"Iso = isolation cut\n"
"Rough = rough cut, low feedrate, multiple passes\n"
"Finish = finishing cut, high feedrate"

#: appDatabase.py:213 appDatabase.py:1210
msgid ""
"Tool Shape. \n"
"Can be:\n"
"C1 ... C4 = circular tool with x flutes\n"
"B = ball tip milling tool\n"
"V = v-shape milling tool"
msgstr ""
"Tool Shape. \n"
"Can be:\n"
"C1 ... C4 = circular tool with x flutes\n"
"B = ball tip milling tool\n"
"V = v-shape milling tool"

#: appDatabase.py:219 appDatabase.py:1311
msgid ""
"Cutting Depth.\n"
"The depth at which to cut into material."
msgstr ""
"Cutting Depth.\n"
"The depth at which to cut into material."

#: appDatabase.py:222 appDatabase.py:1325
msgid ""
"Multi Depth.\n"
"Selecting this will allow cutting in multiple passes,\n"
"each pass adding a DPP parameter depth."
msgstr ""
"Multi Depth.\n"
"Selecting this will allow cutting in multiple passes,\n"
"each pass adding a DPP parameter depth."

#: appDatabase.py:226 appDatabase.py:1338 appDatabase.py:1889
msgid ""
"DPP. Depth per Pass.\n"
"The value used to cut into material on each pass."
msgstr ""
"DPP. Depth per Pass.\n"
"The value used to cut into material on each pass."

#: appDatabase.py:229 appDatabase.py:1226
msgid ""
"V-Dia.\n"
"Diameter of the tip for V-Shape Tools."
msgstr ""
"V-Dia.\n"
"Diameter of the tip for V-Shape Tools."

#: appDatabase.py:232 appDatabase.py:1240
msgid ""
"V-Agle.\n"
"Angle at the tip for the V-Shape Tools."
msgstr ""
"V-Agle.\n"
"Angle at the tip for the V-Shape Tools."

#: appDatabase.py:235 appDatabase.py:1352
msgid ""
"Clearance Height.\n"
"Height at which the milling bit will travel between cuts,\n"
"above the surface of the material, avoiding all fixtures."
msgstr ""
"Clearance Height.\n"
"Height at which the milling bit will travel between cuts,\n"
"above the surface of the material, avoiding all fixtures."

#: appDatabase.py:239
msgid ""
"FR. Feedrate\n"
"The speed on XY plane used while cutting into material."
msgstr ""
"FR. Feedrate\n"
"The speed on XY plane used while cutting into material."

#: appDatabase.py:242
msgid ""
"FR Z. Feedrate Z\n"
"The speed on Z plane."
msgstr ""
"FR Z. Feedrate Z\n"
"The speed on Z plane."

#: appDatabase.py:245 appDatabase.py:1433
msgid ""
"FR Rapids. Feedrate Rapids\n"
"Speed used while moving as fast as possible.\n"
"This is used only by some devices that can't use\n"
"the G0 g-code command. Mostly 3D printers."
msgstr ""
"FR Rapids. Feedrate Rapids\n"
"Speed used while moving as fast as possible.\n"
"This is used only by some devices that can't use\n"
"the G0 g-code command. Mostly 3D printers."

#: appDatabase.py:250 appDatabase.py:1454
msgid ""
"Spindle Speed.\n"
"If it's left empty it will not be used.\n"
"The speed of the spindle in RPM."
msgstr ""
"Spindle Speed.\n"
"If it's left empty it will not be used.\n"
"The speed of the spindle in RPM."

#: appDatabase.py:254 appDatabase.py:1469 appDatabase.py:1986
#, fuzzy
#| msgid ""
#| "Dwell.\n"
#| "Check this if a delay is needed to allow\n"
#| "the spindle motor to reach it's set speed."
msgid ""
"Dwell.\n"
"Check this if a delay is needed to allow\n"
"the spindle motor to reach its set speed."
msgstr ""
"Dwell.\n"
"Check this if a delay is needed to allow\n"
"the spindle motor to reach it's set speed."

#: appDatabase.py:258 appDatabase.py:1482 appDatabase.py:1999
#, fuzzy
#| msgid ""
#| "Dwell Time.\n"
#| "A delay used to allow the motor spindle reach it's set speed."
msgid ""
"Dwell Time.\n"
"A delay used to allow the motor spindle reach its set speed."
msgstr ""
"Dwell Time.\n"
"A delay used to allow the motor spindle reach it's set speed."

#: appDatabase.py:261
msgid ""
"Preprocessor.\n"
"A selection of files that will alter the generated G-code\n"
"to fit for a number of use cases."
msgstr ""
"Preprocessor.\n"
"A selection of files that will alter the generated G-code\n"
"to fit for a number of use cases."

#: appDatabase.py:265 appDatabase.py:1367
msgid ""
"Extra Cut.\n"
"If checked, after a isolation is finished an extra cut\n"
"will be added where the start and end of isolation meet\n"
"such as that this point is covered by this extra cut to\n"
"ensure a complete isolation."
msgstr ""
"Extra Cut.\n"
"If checked, after a isolation is finished an extra cut\n"
"will be added where the start and end of isolation meet\n"
"such as that this point is covered by this extra cut to\n"
"ensure a complete isolation."

#: appDatabase.py:271 appDatabase.py:1382
msgid ""
"Extra Cut length.\n"
"If checked, after a isolation is finished an extra cut\n"
"will be added where the start and end of isolation meet\n"
"such as that this point is covered by this extra cut to\n"
"ensure a complete isolation. This is the length of\n"
"the extra cut."
msgstr ""
"Extra Cut length.\n"
"If checked, after a isolation is finished an extra cut\n"
"will be added where the start and end of isolation meet\n"
"such as that this point is covered by this extra cut to\n"
"ensure a complete isolation. This is the length of\n"
"the extra cut."

#: appDatabase.py:278
msgid ""
"Toolchange.\n"
"It will create a toolchange event.\n"
"The kind of toolchange is determined by\n"
"the preprocessor file."
msgstr ""
"Toolchange.\n"
"It will create a toolchange event.\n"
"The kind of toolchange is determined by\n"
"the preprocessor file."

#: appDatabase.py:283
msgid ""
"Toolchange XY.\n"
"A set of coordinates in the format (x, y).\n"
"Will determine the cartesian position of the point\n"
"where the tool change event take place."
msgstr ""
"Toolchange XY.\n"
"A set of coordinates in the format (x, y).\n"
"Will determine the cartesian position of the point\n"
"where the tool change event take place."

#: appDatabase.py:288
msgid ""
"Toolchange Z.\n"
"The position on Z plane where the tool change event take place."
msgstr ""
"Toolchange Z.\n"
"The position on Z plane where the tool change event take place."

#: appDatabase.py:291
msgid ""
"Start Z.\n"
"If it's left empty it will not be used.\n"
"A position on Z plane to move immediately after job start."
msgstr ""
"Start Z.\n"
"If it's left empty it will not be used.\n"
"A position on Z plane to move immediately after job start."

#: appDatabase.py:295
msgid ""
"End Z.\n"
"A position on Z plane to move immediately after job stop."
msgstr ""
"End Z.\n"
"A position on Z plane to move immediately after job stop."

#: appDatabase.py:307 appDatabase.py:684 appDatabase.py:718 appDatabase.py:2647
#: appDatabase.py:3017 appDatabase.py:3051 appTools/ToolCutOut.py:293
#: appTools/ToolDrilling.py:895 appTools/ToolIsolation.py:1032
#: appTools/ToolNCC.py:964 appTools/ToolPaint.py:703
msgid "Could not load Tools DB file."
msgstr "Could not load Tools DB file."

#: appDatabase.py:315 appDatabase.py:726 appDatabase.py:2655
#: appDatabase.py:3059 appTools/ToolCutOut.py:304 appTools/ToolDrilling.py:903
#: appTools/ToolIsolation.py:1043 appTools/ToolNCC.py:975
#: appTools/ToolPaint.py:714
msgid "Failed to parse Tools DB file."
msgstr "Failed to parse Tools DB file."

#: appDatabase.py:318 appDatabase.py:729 appDatabase.py:2658
#: appDatabase.py:3062
msgid "Loaded Tools DB from"
msgstr "Loaded Tools DB from"

#: appDatabase.py:324 appDatabase.py:2562
msgid "Add to DB"
msgstr "Add to DB"

#: appDatabase.py:326 appDatabase.py:2565
msgid "Copy from DB"
msgstr "Copy from DB"

#: appDatabase.py:328 appDatabase.py:2568
msgid "Delete from DB"
msgstr "Delete from DB"

#: appDatabase.py:605 appDatabase.py:2917
msgid "Tool added to DB."
msgstr "Tool added to DB."

#: appDatabase.py:626 appDatabase.py:2950
msgid "Tool copied from Tools DB."
msgstr "Tool copied from Tools DB."

#: appDatabase.py:644 appDatabase.py:2977
msgid "Tool removed from Tools DB."
msgstr "Tool removed from Tools DB."

#: appDatabase.py:655 appDatabase.py:2988
msgid "Export Tools Database"
msgstr "Export Tools Database"

#: appDatabase.py:658 appDatabase.py:2991
msgid "Tools_Database"
msgstr "Tools_Database"

#: appDatabase.py:695 appDatabase.py:698 appDatabase.py:750 appDatabase.py:3028
#: appDatabase.py:3031 appDatabase.py:3126
msgid "Failed to write Tools DB to file."
msgstr "Failed to write Tools DB to file."

#: appDatabase.py:701 appDatabase.py:3034
msgid "Exported Tools DB to"
msgstr "Exported Tools DB to"

#: appDatabase.py:708 appDatabase.py:3041
msgid "Import FlatCAM Tools DB"
msgstr "Import FlatCAM Tools DB"

#: appDatabase.py:740 appDatabase.py:915 appDatabase.py:3073
#: appDatabase.py:3464 appObjects/FlatCAMGeometry.py:1029
#: appTools/ToolCutOut.py:482 appTools/ToolCutOut.py:523
#: appTools/ToolIsolation.py:2545 appTools/ToolIsolation.py:2629
#: appTools/ToolNCC.py:3607 appTools/ToolNCC.py:3687 appTools/ToolPaint.py:2625
#: appTools/ToolPaint.py:2714 app_Main.py:5676 app_Main.py:5718
#: app_Main.py:5749 app_Main.py:5769 app_Main.py:5779
msgid "Tools Database"
msgstr "Tools Database"

#: appDatabase.py:754 appDatabase.py:3130
msgid "Saved Tools DB."
msgstr "Saved Tools DB."

#: appDatabase.py:901 appDatabase.py:3447
msgid "No Tool/row selected in the Tools Database table"
msgstr "No Tool/row selected in the Tools Database table"

#: appDatabase.py:919 appDatabase.py:3468
msgid "Cancelled adding tool from DB."
msgstr "Cancelled adding tool from DB."

#: appDatabase.py:995
#, fuzzy
#| msgid "NCC Tool Options"
msgid "Tool Description"
msgstr "NCC Tool Options"

#: appDatabase.py:1008
#, fuzzy
#| msgid "Milling Diameter"
msgid "Milling Parameters"
msgstr "Milling Diameter"

#: appDatabase.py:1021
msgid "NCC Parameters"
msgstr "NCC Parameters"

#: appDatabase.py:1034
msgid "Paint Parameters"
msgstr "Paint Parameters"

#: appDatabase.py:1047
msgid "Isolation Parameters"
msgstr "Isolation Parameters"

#: appDatabase.py:1060
#, fuzzy
#| msgid "Film Parameters"
msgid "Drilling Parameters"
msgstr "Film Parameters"

#: appDatabase.py:1073
#, fuzzy
#| msgid "Slot Parameters"
msgid "Cutout Parameters"
msgstr "Slot Parameters"

#: appDatabase.py:1124 appEditors/AppGeoEditor.py:3287 appGUI/ObjectUI.py:219
#: appGUI/ObjectUI.py:518 appGUI/ObjectUI.py:796 appGUI/ObjectUI.py:1739
#: appGUI/ObjectUI.py:2518 appGUI/ObjectUI.py:2585
#: appTools/ToolCalibration.py:929 appTools/ToolFiducials.py:681
msgid "Name"
msgstr "Name"

#: appDatabase.py:1137 appEditors/AppExcEditor.py:2567
#: appEditors/AppExcEditor.py:3732 appGUI/ObjectUI.py:588
#: appObjects/FlatCAMExcellon.py:876 appObjects/FlatCAMExcellon.py:976
#: appTools/ToolDrilling.py:1762 appTools/ToolDrilling.py:1827
#: appTools/ToolDrilling.py:2065 appTools/ToolIsolation.py:2984
#: appTools/ToolMilling.py:1071 appTools/ToolMilling.py:1175
#: appTools/ToolMilling.py:1360 appTools/ToolMilling.py:1670
#: appTools/ToolNCC.py:3777 appTools/ToolPaint.py:2812
#: appTools/ToolPcbWizard.py:404 appTools/ToolProperties.py:417
#: appTools/ToolProperties.py:480 appTools/ToolSolderPaste.py:1166
#: tclCommands/TclCommandDrillcncjob.py:195
msgid "Diameter"
msgstr "Diameter"

#: appDatabase.py:1150
#, fuzzy
#| msgid "Geo Tolerance"
msgid "Diameter Tolerance"
msgstr "Geo Tolerance"

#: appDatabase.py:1152
msgid ""
"Tool tolerance. If there is a tool in the targeted tools table with\n"
"the value within the limits then this tool from DB will be used."
msgstr ""

#: appDatabase.py:1158
#, fuzzy
#| msgid "in"
msgid "Min"
msgstr "in"

#: appDatabase.py:1160
msgid "Set the tool tolerance minimum."
msgstr ""

#: appDatabase.py:1172
msgid "Max"
msgstr ""

#: appDatabase.py:1174
msgid "Set the tool tolerance maximum."
msgstr ""

#: appDatabase.py:1186 appDatabase.py:1504
#: appGUI/preferences/excellon/ExcellonOptPrefGroupUI.py:46
#: appTools/ToolMilling.py:1738 appTools/ToolNCC.py:3942
msgid "Operation"
msgstr "Operation"

#: appDatabase.py:1188
msgid "The kind of Application Tool where this tool is to be used."
msgstr ""

#: appDatabase.py:1192 appDatabase.py:2695 appDatabase.py:2731
#: appDatabase.py:2794 appDatabase.py:3079 appGUI/MainGUI.py:1299
msgid "General"
msgstr "General"

#: appDatabase.py:1192 appDatabase.py:2753 appDatabase.py:3082
#: appGUI/preferences/excellon/ExcellonOptPrefGroupUI.py:55
#: appTools/ToolMilling.py:1747
msgid "Milling"
msgstr "Milling"

#: appDatabase.py:1192 appDatabase.py:2757 appDatabase.py:3087
#: appGUI/preferences/excellon/ExcellonOptPrefGroupUI.py:54
#: appTools/ToolMilling.py:1746
msgid "Drilling"
msgstr "Drilling"

#: appDatabase.py:1192 appDatabase.py:1514 appDatabase.py:2761
#: appDatabase.py:3095 appTools/ToolIsolation.py:1066
#: appTools/ToolIsolation.py:2538 appTools/ToolNCC.py:3952
msgid "Isolation"
msgstr "Isolation"

#: appDatabase.py:1192 appDatabase.py:2767 appDatabase.py:3103
#: appEditors/AppGeoEditor.py:528 appGUI/MainGUI.py:1506
#: appTools/ToolPaint.py:737 appTools/ToolPaint.py:2618
msgid "Paint"
msgstr "Paint"

#: appDatabase.py:1192 appDatabase.py:2773 appDatabase.py:3111
#: appTools/ToolNCC.py:999 appTools/ToolNCC.py:3600
#, fuzzy
#| msgid "CCW"
msgid "NCC"
msgstr "CCW"

#: appDatabase.py:1192 appDatabase.py:2779 appTools/ToolCutOut.py:327
#: appTools/ToolCutOut.py:463
#, fuzzy
#| msgid "Cutout PCB"
msgid "Cutout"
msgstr "Cutout PCB"

#: appDatabase.py:1208
#: appGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:220
#: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:293
#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:322
#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:286
#: appTools/ToolIsolation.py:3377 appTools/ToolNCC.py:4235
#: appTools/ToolPaint.py:3162
msgid "Shape"
msgstr "Shape"

#: appDatabase.py:1403 appGUI/ObjectUI.py:1155
#: appGUI/preferences/geometry/GeometryOptPrefGroupUI.py:186
#: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:148
#: appTools/ToolMilling.py:1860 appTools/ToolSolderPaste.py:1325
msgid "Feedrate X-Y"
msgstr "Feedrate X-Y"

#: appDatabase.py:1405
msgid ""
"Feedrate X-Y. Feedrate\n"
"The speed on XY plane used while cutting into material."
msgstr ""
"Feedrate X-Y. Feedrate\n"
"The speed on XY plane used while cutting into material."

#: appDatabase.py:1417 appDatabase.py:1929 appGUI/ObjectUI.py:1169
#: appGUI/preferences/geometry/GeometryOptPrefGroupUI.py:201
#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:171
#: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:161
#: appTools/ToolDrilling.py:2210 appTools/ToolMilling.py:1875
#: appTools/ToolSolderPaste.py:1337
msgid "Feedrate Z"
msgstr "Feedrate Z"

#: appDatabase.py:1419
msgid ""
"Feedrate Z\n"
"The speed on Z plane."
msgstr ""
"Feedrate Z\n"
"The speed on Z plane."

#: appDatabase.py:1506 appTools/ToolNCC.py:3944
msgid ""
"The 'Operation' can be:\n"
"- Isolation -> will ensure that the non-copper clearing is always complete.\n"
"If it's not successful then the non-copper clearing will fail, too.\n"
"- Clear -> the regular non-copper clearing."
msgstr ""
"The 'Operation' can be:\n"
"- Isolation -> will ensure that the non-copper clearing is always complete.\n"
"If it's not successful then the non-copper clearing will fail, too.\n"
"- Clear -> the regular non-copper clearing."

#: appDatabase.py:1513 appEditors/AppGerberEditor.py:2749
#: appGUI/GUIElements.py:3021 appTools/ToolNCC.py:3951
msgid "Clear"
msgstr "Clear"

#: appDatabase.py:1522 appDatabase.py:1768
#: appGUI/preferences/excellon/ExcellonOptPrefGroupUI.py:62
#: appGUI/preferences/geometry/GeometryEditorPrefGroupUI.py:56
#: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:182
#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:137
#: appTools/ToolIsolation.py:3166 appTools/ToolMilling.py:1760
#: appTools/ToolNCC.py:3960
msgid "Milling Type"
msgstr "Milling Type"

#: appDatabase.py:1524 appDatabase.py:1532 appDatabase.py:1770
#: appDatabase.py:1778 appGUI/preferences/tools/ToolsISOPrefGroupUI.py:184
#: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:192
#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:139
#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:147
#: appTools/ToolIsolation.py:3168 appTools/ToolIsolation.py:3176
#: appTools/ToolNCC.py:3962 appTools/ToolNCC.py:3970
msgid ""
"Milling type when the selected tool is of type: 'iso_op':\n"
"- climb / best for precision milling and to reduce tool usage\n"
"- conventional / useful when there is no backlash compensation"
msgstr ""
"Milling type when the selected tool is of type: 'iso_op':\n"
"- climb / best for precision milling and to reduce tool usage\n"
"- conventional / useful when there is no backlash compensation"

#: appDatabase.py:1529 appDatabase.py:1775
#: appGUI/preferences/geometry/GeometryEditorPrefGroupUI.py:62
#: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:189
#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:144
#: appTools/ToolIsolation.py:3173 appTools/ToolNCC.py:3967
msgid "Climb"
msgstr "Climb"

#: appDatabase.py:1530 appDatabase.py:1776
#: appGUI/preferences/geometry/GeometryEditorPrefGroupUI.py:63
#: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:190
#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:145
#: appTools/ToolIsolation.py:3174 appTools/ToolNCC.py:3968
msgid "Conventional"
msgstr "Conventional"

#: appDatabase.py:1542 appDatabase.py:1651 appDatabase.py:1753
#: appDatabase.py:2027 appEditors/AppGeoEditor.py:450 appGUI/ObjectUI.py:1553
#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:250
#: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:167
#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:182
#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:163
#: appTools/ToolDrilling.py:2312 appTools/ToolIsolation.py:3151
#: appTools/ToolNCC.py:3983 appTools/ToolPaint.py:2954
msgid "Overlap"
msgstr "Overlap"

#: appDatabase.py:1544 appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:184
#: appTools/ToolNCC.py:3985
msgid ""
"How much (percentage) of the tool width to overlap each tool pass.\n"
"Adjust the value starting with lower values\n"
"and increasing it if areas that should be cleared are still \n"
"not cleared.\n"
"Lower values = faster processing, faster execution on CNC.\n"
"Higher values = slow processing and slow execution on CNC\n"
"due of too many paths."
msgstr ""
"How much (percentage) of the tool width to overlap each tool pass.\n"
"Adjust the value starting with lower values\n"
"and increasing it if areas that should be cleared are still \n"
"not cleared.\n"
"Lower values = faster processing, faster execution on CNC.\n"
"Higher values = slow processing and slow execution on CNC\n"
"due of too many paths."

#: appDatabase.py:1563 appDatabase.py:2071 appEditors/AppGeoEditor.py:470
#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:72
#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:229
#: appGUI/preferences/tools/Tools2FiducialsPrefGroupUI.py:59
#: appGUI/preferences/tools/Tools2InvertPrefGroupUI.py:45
#: appGUI/preferences/tools/Tools2InvertPrefGroupUI.py:53
#: appGUI/preferences/tools/ToolsCornersPrefGroupUI.py:66
#: appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:115
#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:202
#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:183
#: appTools/ToolCopperThieving.py:1204 appTools/ToolCopperThieving.py:1455
#: appTools/ToolCorners.py:411 appTools/ToolCutOut.py:2155
#: appTools/ToolFiducials.py:786 appTools/ToolInvertGerber.py:234
#: appTools/ToolInvertGerber.py:242 appTools/ToolNCC.py:4027
#: appTools/ToolNCC.py:4130
msgid "Margin"
msgstr "Margin"

#: appDatabase.py:1565
#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:74
#: appGUI/preferences/tools/Tools2FiducialsPrefGroupUI.py:61
#: appGUI/preferences/tools/Tools2FiducialsPrefGroupUI.py:125
#: appGUI/preferences/tools/ToolsCornersPrefGroupUI.py:68
#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:204
#: appTools/ToolCopperThieving.py:1206 appTools/ToolCorners.py:413
#: appTools/ToolFiducials.py:788 appTools/ToolNCC.py:4029
#: appTools/ToolNCC.py:4132
msgid "Bounding box margin."
msgstr "Bounding box margin."

#: appDatabase.py:1576 appDatabase.py:1687 appEditors/AppGeoEditor.py:484
#: appGUI/ObjectUI.py:1568 appGUI/ObjectUI.py:2009
#: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:85
#: appGUI/preferences/tools/Tools2EDrillsPrefGroupUI.py:105
#: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:106
#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:215
#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:198
#: appTools/ToolExtractDrills.py:520 appTools/ToolNCC.py:4004
#: appTools/ToolPaint.py:2990 appTools/ToolPunchGerber.py:793
msgid "Method"
msgstr "Method"

#: appDatabase.py:1578 appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:217
#: appTools/ToolNCC.py:4006
msgid ""
"Algorithm for copper clearing:\n"
"- Standard: Fixed step inwards.\n"
"- Seed-based: Outwards from seed.\n"
"- Line-based: Parallel lines."
msgstr ""
"Algorithm for copper clearing:\n"
"- Standard: Fixed step inwards.\n"
"- Seed-based: Outwards from seed.\n"
"- Line-based: Parallel lines."

#: appDatabase.py:1586 appDatabase.py:1701 appEditors/AppGeoEditor.py:498
#: appGUI/ObjectUI.py:1578 appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:230
#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:217
#: appTools/ToolNCC.py:1915 appTools/ToolNCC.py:4019 appTools/ToolPaint.py:1455
#: appTools/ToolPaint.py:3015 tclCommands/TclCommandCopperClear.py:126
#: tclCommands/TclCommandCopperClear.py:134 tclCommands/TclCommandPaint.py:125
msgid "Standard"
msgstr "Standard"

#: appDatabase.py:1586 appDatabase.py:1701 appEditors/AppGeoEditor.py:498
#: appEditors/AppGeoEditor.py:568 appEditors/AppGeoEditor.py:5113
#: appGUI/ObjectUI.py:1578 appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:230
#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:217
#: appTools/ToolNCC.py:1926 appTools/ToolNCC.py:4019 appTools/ToolPaint.py:1469
#: appTools/ToolPaint.py:3015 defaults.py:463 defaults.py:500
#: tclCommands/TclCommandCopperClear.py:128
#: tclCommands/TclCommandCopperClear.py:136 tclCommands/TclCommandPaint.py:127
msgid "Seed"
msgstr "Seed"

#: appDatabase.py:1586 appDatabase.py:1701 appEditors/AppGeoEditor.py:498
#: appEditors/AppGeoEditor.py:5117 appGUI/ObjectUI.py:1578
#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:230
#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:217
#: appTools/ToolNCC.py:1937 appTools/ToolNCC.py:4019 appTools/ToolPaint.py:160
#: appTools/ToolPaint.py:1483 appTools/ToolPaint.py:3015
#: tclCommands/TclCommandCopperClear.py:130 tclCommands/TclCommandPaint.py:129
msgid "Lines"
msgstr "Lines"

#: appDatabase.py:1586 appDatabase.py:1701
#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:230
#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:217
#: appTools/ToolNCC.py:1948 appTools/ToolNCC.py:4019 appTools/ToolPaint.py:1648
#: appTools/ToolPaint.py:3015 tclCommands/TclCommandPaint.py:133
msgid "Combo"
msgstr "Combo"

#: appDatabase.py:1594 appDatabase.py:1712 appGUI/ObjectUI.py:2094
#: appGUI/ObjectUI.py:2117 appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:237
#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:224
#: appObjects/FlatCAMCNCJob.py:1271 appObjects/FlatCAMCNCJob.py:1293
#: appTools/ToolNCC.py:4040 appTools/ToolNCC.py:4143 appTools/ToolPaint.py:3026
msgid "Connect"
msgstr "Connect"

#: appDatabase.py:1598 appDatabase.py:1715 appEditors/AppGeoEditor.py:507
#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:239
#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:226
#: appTools/ToolNCC.py:4044 appTools/ToolNCC.py:4145 appTools/ToolPaint.py:3029
msgid ""
"Draw lines between resulting\n"
"segments to minimize tool lifts."
msgstr ""
"Draw lines between resulting\n"
"segments to minimize tool lifts."

#: appDatabase.py:1604 appDatabase.py:1719
#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:246
#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:232
#: appTools/ToolNCC.py:4050 appTools/ToolNCC.py:4151 appTools/ToolPaint.py:3033
msgid "Contour"
msgstr "Contour"

#: appDatabase.py:1608 appDatabase.py:1722 appEditors/AppGeoEditor.py:517
#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:248
#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:234
#: appTools/ToolNCC.py:4054 appTools/ToolNCC.py:4153 appTools/ToolPaint.py:3036
msgid ""
"Cut around the perimeter of the polygon\n"
"to trim rough edges."
msgstr ""
"Cut around the perimeter of the polygon\n"
"to trim rough edges."

#: appDatabase.py:1614 appDatabase.py:1672 appEditors/AppGeoEditor.py:611
#: appEditors/AppGerberEditor.py:5321 appEditors/appGCodeEditor.py:692
#: appGUI/ObjectUI.py:143 appGUI/ObjectUI.py:875 appGUI/ObjectUI.py:1846
#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:255
#: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:183
#: appTools/ToolEtchCompensation.py:417 appTools/ToolEtchCompensation.py:425
#: appTools/ToolNCC.py:4060 appTools/ToolNCC.py:4159 appTools/ToolPaint.py:2975
#: appTools/ToolPaint.py:3082 appTools/ToolTransform.py:517
msgid "Offset"
msgstr "Offset"

#: appDatabase.py:1618 appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:257
#: appTools/ToolNCC.py:4064 appTools/ToolNCC.py:4161
msgid ""
"If used, it will add an offset to the copper features.\n"
"The copper clearing will finish to a distance\n"
"from the copper features.\n"
"The value can be between 0 and 10 FlatCAM units."
msgstr ""
"If used, it will add an offset to the copper features.\n"
"The copper clearing will finish to a distance\n"
"from the copper features.\n"
"The value can be between 0 and 10 FlatCAM units."

#: appDatabase.py:1653 appEditors/AppGeoEditor.py:452
#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:165
#: appTools/ToolPaint.py:2956
msgid ""
"How much (percentage) of the tool width to overlap each tool pass.\n"
"Adjust the value starting with lower values\n"
"and increasing it if areas that should be painted are still \n"
"not painted.\n"
"Lower values = faster processing, faster execution on CNC.\n"
"Higher values = slow processing and slow execution on CNC\n"
"due of too many paths."
msgstr ""
"How much (percentage) of the tool width to overlap each tool pass.\n"
"Adjust the value starting with lower values\n"
"and increasing it if areas that should be painted are still \n"
"not painted.\n"
"Lower values = faster processing, faster execution on CNC.\n"
"Higher values = slow processing and slow execution on CNC\n"
"due of too many paths."

#: appDatabase.py:1674 appEditors/AppGeoEditor.py:472
#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:185
#: appTools/ToolPaint.py:2977 appTools/ToolPaint.py:3084
msgid ""
"Distance by which to avoid\n"
"the edges of the polygon to\n"
"be painted."
msgstr ""
"Distance by which to avoid\n"
"the edges of the polygon to\n"
"be painted."

#: appDatabase.py:1689 appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:200
#: appTools/ToolPaint.py:2992
msgid ""
"Algorithm for painting:\n"
"- Standard: Fixed step inwards.\n"
"- Seed-based: Outwards from seed.\n"
"- Line-based: Parallel lines.\n"
"- Laser-lines: Active only for Gerber objects.\n"
"Will create lines that follow the traces.\n"
"- Combo: In case of failure a new method will be picked from the above\n"
"in the order specified."
msgstr ""
"Algorithm for painting:\n"
"- Standard: Fixed step inwards.\n"
"- Seed-based: Outwards from seed.\n"
"- Line-based: Parallel lines.\n"
"- Laser-lines: Active only for Gerber objects.\n"
"Will create lines that follow the traces.\n"
"- Combo: In case of failure a new method will be picked from the above\n"
"in the order specified."

#: appDatabase.py:1701 appDatabase.py:1703
#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:217
#: appTools/ToolPaint.py:154 appTools/ToolPaint.py:159
#: appTools/ToolPaint.py:1497 appTools/ToolPaint.py:3015
#: appTools/ToolPaint.py:3017 tclCommands/TclCommandPaint.py:131
msgid "Laser_lines"
msgstr "Laser_lines"

#: appDatabase.py:1740 appGUI/preferences/tools/ToolsISOPrefGroupUI.py:154
#: appTools/ToolIsolation.py:3138
msgid "Passes"
msgstr "Passes"

#: appDatabase.py:1742 appGUI/preferences/tools/ToolsISOPrefGroupUI.py:156
#: appTools/ToolIsolation.py:3140
msgid ""
"Width of the isolation gap in\n"
"number (integer) of tool widths."
msgstr ""
"Width of the isolation gap in\n"
"number (integer) of tool widths."

#: appDatabase.py:1755 appGUI/ObjectUI.py:1555
#: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:169
#: appTools/ToolIsolation.py:3153
msgid "How much (percentage) of the tool width to overlap each tool pass."
msgstr "How much (percentage) of the tool width to overlap each tool pass."

#: appDatabase.py:1788 appGUI/ObjectUI.py:234
#: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:201
#: appTools/ToolIsolation.py:3186
msgid "Follow"
msgstr "Follow"

#: appDatabase.py:1790 appDatabase.py:1796 appGUI/ObjectUI.py:235
#: appGUI/preferences/gerber/GerberAdvOptPrefGroupUI.py:45
#: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:203
#: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:209
#: appTools/ToolIsolation.py:3188 appTools/ToolIsolation.py:3194
msgid ""
"Generate a 'Follow' geometry.\n"
"This means that it will cut through\n"
"the middle of the trace."
msgstr ""
"Generate a 'Follow' geometry.\n"
"This means that it will cut through\n"
"the middle of the trace."

#: appDatabase.py:1805 appGUI/preferences/tools/ToolsISOPrefGroupUI.py:218
#: appTools/ToolIsolation.py:3203
msgid "Isolation Type"
msgstr "Isolation Type"

#: appDatabase.py:1807 appGUI/preferences/tools/ToolsISOPrefGroupUI.py:220
#: appTools/ToolIsolation.py:3205
msgid ""
"Choose how the isolation will be executed:\n"
"- 'Full' -> complete isolation of polygons\n"
"- 'Ext' -> will isolate only on the outside\n"
"- 'Int' -> will isolate only on the inside\n"
"'Exterior' isolation is almost always possible\n"
"(with the right tool) but 'Interior'\n"
"isolation can be done only when there is an opening\n"
"inside of the polygon (e.g polygon is a 'doughnut' shape)."
msgstr ""
"Choose how the isolation will be executed:\n"
"- 'Full' -> complete isolation of polygons\n"
"- 'Ext' -> will isolate only on the outside\n"
"- 'Int' -> will isolate only on the inside\n"
"'Exterior' isolation is almost always possible\n"
"(with the right tool) but 'Interior'\n"
"isolation can be done only when there is an opening\n"
"inside of the polygon (e.g polygon is a 'doughnut' shape)."

#: appDatabase.py:1816 appGUI/preferences/gerber/GerberAdvOptPrefGroupUI.py:72
#: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:229
#: appTools/ToolIsolation.py:3214
msgid "Full"
msgstr "Full"

#: appDatabase.py:1817 appGUI/preferences/tools/ToolsISOPrefGroupUI.py:230
#: appTools/ToolIsolation.py:3215
msgid "Ext"
msgstr "Ext"

#: appDatabase.py:1818 appGUI/preferences/tools/ToolsISOPrefGroupUI.py:231
#: appTools/ToolIsolation.py:3216
msgid "Int"
msgstr "Int"

#: appDatabase.py:1836 appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:59
#: appTools/ToolDrilling.py:2145 appTools/ToolMilling.py:1795
msgid ""
"Drill depth (negative)\n"
"below the copper surface."
msgstr ""
"Drill depth (negative)\n"
"below the copper surface."

#: appDatabase.py:1855 appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:283
#: appTools/ToolDrilling.py:2288 appTools/ToolMilling.py:1980
msgid "Offset Z"
msgstr "Offset Z"

#: appDatabase.py:1857 appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:285
#: appTools/ToolDrilling.py:2290 appTools/ToolMilling.py:1982
msgid ""
"Some drill bits (the larger ones) need to drill deeper\n"
"to create the desired exit hole diameter due of the tip shape.\n"
"The value here can compensate the Cut Z parameter."
msgstr ""
"Some drill bits (the larger ones) need to drill deeper\n"
"to create the desired exit hole diameter due of the tip shape.\n"
"The value here can compensate the Cut Z parameter."

#: appDatabase.py:1874 appGUI/ObjectUI.py:1113
#: appGUI/preferences/geometry/GeometryOptPrefGroupUI.py:72
#: appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:82
#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:80
#: appTools/ToolCutOut.py:2126 appTools/ToolDrilling.py:2167
#: appTools/ToolMilling.py:1817
msgid ""
"Use multiple passes to limit\n"
"the cut depth in each pass. Will\n"
"cut multiple times until Cut Z is\n"
"reached."
msgstr ""
"Use multiple passes to limit\n"
"the cut depth in each pass. Will\n"
"cut multiple times until Cut Z is\n"
"reached."

#: appDatabase.py:1896 appGUI/ObjectUI.py:1127
#: appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:94
#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:92
#: appTools/ToolCutOut.py:2140 appTools/ToolDrilling.py:2180
#: appTools/ToolMilling.py:1830
msgid "Depth of each pass (positive)."
msgstr "Depth of each pass (positive)."

#: appDatabase.py:1905 appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:100
#: appTools/ToolDrilling.py:2191 appTools/ToolMilling.py:1841
msgid ""
"Tool height when travelling\n"
"across the XY plane."
msgstr ""
"Tool height when travelling\n"
"across the XY plane."

#: appDatabase.py:1931 appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:173
#: appTools/ToolDrilling.py:2212 appTools/ToolMilling.py:1877
msgid ""
"Tool speed while drilling\n"
"(in units per minute).\n"
"So called 'Plunge' feedrate.\n"
"This is for linear move G01."
msgstr ""
"Tool speed while drilling\n"
"(in units per minute).\n"
"So called 'Plunge' feedrate.\n"
"This is for linear move G01."

#: appDatabase.py:1946 appGUI/ObjectUI.py:1184
#: appGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:67
#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:317
#: appTools/ToolDrilling.py:2227 appTools/ToolMilling.py:1892
msgid "Feedrate Rapids"
msgstr "Feedrate Rapids"

#: appDatabase.py:1948 appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:319
#: appTools/ToolDrilling.py:2229 appTools/ToolMilling.py:1894
msgid ""
"Tool speed while drilling\n"
"(in units per minute).\n"
"This is for the rapid move G00.\n"
"It is useful only for Marlin,\n"
"ignore for any other cases."
msgstr ""
"Tool speed while drilling\n"
"(in units per minute).\n"
"This is for the rapid move G00.\n"
"It is useful only for Marlin,\n"
"ignore for any other cases."

#: appDatabase.py:1969 appGUI/ObjectUI.py:1227
#: appGUI/preferences/geometry/GeometryOptPrefGroupUI.py:217
#: appObjects/FlatCAMGeometry.py:1761 appTools/ToolDrilling.py:1310
#: appTools/ToolDrilling.py:2249 appTools/ToolMilling.py:1307
#: appTools/ToolMilling.py:1942
msgid "Spindle speed"
msgstr "Spindle speed"

#: appDatabase.py:1971 appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:188
#: appTools/ToolDrilling.py:2251 appTools/ToolMilling.py:1944
msgid ""
"Speed of the spindle\n"
"in RPM (optional)"
msgstr ""
"Speed of the spindle\n"
"in RPM (optional)"

#: appDatabase.py:2016 appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:243
#: appTools/ToolDrilling.py:2304
#, fuzzy
#| msgid "Mill Slots"
msgid "Drill slots"
msgstr "Mill Slots"

#: appDatabase.py:2018 appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:245
#: appTools/ToolDrilling.py:2306
msgid "If the selected tool has slots then they will be drilled."
msgstr ""

#: appDatabase.py:2029 appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:252
#: appTools/ToolDrilling.py:2314
#, fuzzy
#| msgid "How much (percentage) of the tool width to overlap each tool pass."
msgid ""
"How much (percentage) of the tool diameter to overlap previous drill hole."
msgstr "How much (percentage) of the tool width to overlap each tool pass."

#: appDatabase.py:2043 appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:264
#: appTools/ToolDrilling.py:2328
msgid "Last drill"
msgstr ""

#: appDatabase.py:2045 appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:266
#: appTools/ToolDrilling.py:2330
msgid ""
"If the slot length is not completely covered by drill holes,\n"
"add a drill hole on the slot end point."
msgstr ""

#: appDatabase.py:2073 appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:117
#: appTools/ToolCutOut.py:2157
msgid ""
"Margin over bounds. A positive value here\n"
"will make the cutout of the PCB further from\n"
"the actual PCB border"
msgstr ""
"Margin over bounds. A positive value here\n"
"will make the cutout of the PCB further from\n"
"the actual PCB border"

#: appDatabase.py:2085 appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:131
#: appTools/ToolCutOut.py:2165
msgid "Gap size"
msgstr "Gap size"

#: appDatabase.py:2087 appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:133
#: appTools/ToolCutOut.py:2167
msgid ""
"The size of the bridge gaps in the cutout\n"
"used to keep the board connected to\n"
"the surrounding material (the one \n"
"from which the PCB is cutout)."
msgstr ""
"The size of the bridge gaps in the cutout\n"
"used to keep the board connected to\n"
"the surrounding material (the one \n"
"from which the PCB is cutout)."

#: appDatabase.py:2096 appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:148
#: appTools/ToolCutOut.py:2180
#, fuzzy
#| msgid "Image type"
msgid "Gap type"
msgstr "Image type"

#: appDatabase.py:2098 appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:150
#: appTools/ToolCutOut.py:2182
msgid ""
"The type of gap:\n"
"- Bridge -> the cutout will be interrupted by bridges\n"
"- Thin -> same as 'bridge' but it will be thinner by partially milling the "
"gap\n"
"- M-Bites -> 'Mouse Bites' - same as 'bridge' but covered with drill holes"
msgstr ""

#: appDatabase.py:2106 appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:158
#: appTools/ToolCutOut.py:2190
msgid "Bridge"
msgstr ""

#: appDatabase.py:2107 appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:159
#: appTools/ToolCutOut.py:2191
msgid "Thin"
msgstr ""

#: appDatabase.py:2118 appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:169
#: appTools/ToolCutOut.py:2201
#, fuzzy
#| msgid "MultiDepth"
msgid "Depth"
msgstr "MultiDepth"

#: appDatabase.py:2120 appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:171
#: appTools/ToolCutOut.py:2203
#, fuzzy
#| msgid ""
#| "The width of the travel lines to be\n"
#| "rendered in the plot."
msgid ""
"The depth until the milling is done\n"
"in order to thin the gaps."
msgstr ""
"The width of the travel lines to be\n"
"rendered in the plot."

#: appDatabase.py:2137 appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:43
#: appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:186
#: appTools/ToolCalculators.py:249 appTools/ToolCutOut.py:2218
msgid "Tool Diameter"
msgstr "Tool Diameter"

#: appDatabase.py:2139 appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:188
#: appTools/ToolCutOut.py:2220
msgid "The drill hole diameter when doing mpuse bites."
msgstr ""

#: appDatabase.py:2150
#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:151
#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:180
#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:209
#: appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:198
#: appTools/ToolCopperThieving.py:1327 appTools/ToolCopperThieving.py:1367
#: appTools/ToolCopperThieving.py:1407 appTools/ToolCutOut.py:2230
msgid "Spacing"
msgstr "Spacing"

#: appDatabase.py:2152 appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:200
#: appTools/ToolCutOut.py:2232
msgid "The spacing between drill holes when doing mouse bites."
msgstr ""

#: appDatabase.py:2171 appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:233
#: appTools/ToolCutOut.py:2032
msgid "Convex Shape"
msgstr "Convex Shape"

#: appDatabase.py:2174 appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:235
#: appTools/ToolCutOut.py:2034 appTools/ToolCutOut.py:2039
msgid ""
"Create a convex shape surrounding the entire PCB.\n"
"Used only if the source object type is Gerber."
msgstr ""
"Create a convex shape surrounding the entire PCB.\n"
"Used only if the source object type is Gerber."

#: appDatabase.py:2182 appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:209
#: appTools/ToolCutOut.py:2261
msgid "Gaps"
msgstr "Gaps"

#: appDatabase.py:2184 appTools/ToolCutOut.py:2263
msgid ""
"Number of gaps used for the Automatic cutout.\n"
"There can be maximum 8 bridges/gaps.\n"
"The choices are:\n"
"- None  - no gaps\n"
"- lr    - left + right\n"
"- tb    - top + bottom\n"
"- 4     - left + right +top + bottom\n"
"- 2lr   - 2*left + 2*right\n"
"- 2tb  - 2*top + 2*bottom\n"
"- 8     - 2*left + 2*right +2*top + 2*bottom"
msgstr ""
"Number of gaps used for the Automatic cutout.\n"
"There can be maximum 8 bridges/gaps.\n"
"The choices are:\n"
"- None  - no gaps\n"
"- lr    - left + right\n"
"- tb    - top + bottom\n"
"- 4     - left + right +top + bottom\n"
"- 2lr   - 2*left + 2*right\n"
"- 2tb  - 2*top + 2*bottom\n"
"- 8     - 2*left + 2*right +2*top + 2*bottom"

#: appDatabase.py:2221
msgid "Add Tool in DB"
msgstr "Add Tool in DB"

#: appDatabase.py:2259
msgid "Save DB"
msgstr "Save DB"

#: appDatabase.py:2262
msgid "Save the Tools Database information's."
msgstr "Save the Tools Database information's."

#: appDatabase.py:2268
msgid ""
"Insert a new tool in the Tools Table of the\n"
"object/application tool after selecting a tool\n"
"in the Tools Database."
msgstr ""
"Insert a new tool in the Tools Table of the\n"
"object/application tool after selecting a tool\n"
"in the Tools Database."

#: appDatabase.py:2294 appDatabase.py:2305 appEditors/AppExcEditor.py:4215
#: appEditors/AppExcEditor.py:4226 appEditors/appGCodeEditor.py:775
#: appEditors/appGCodeEditor.py:786 appGUI/ObjectUI.py:163
#: appGUI/ObjectUI.py:174 appTool.py:280 appTool.py:291
#: appTools/ToolAlignObjects.py:516 appTools/ToolAlignObjects.py:527
#: appTools/ToolCalculators.py:390 appTools/ToolCalculators.py:401
#: appTools/ToolCalibration.py:1395 appTools/ToolCalibration.py:1406
#: appTools/ToolCopperThieving.py:1595 appTools/ToolCopperThieving.py:1606
#: appTools/ToolCorners.py:462 appTools/ToolCorners.py:473
#: appTools/ToolCutOut.py:2435 appTools/ToolCutOut.py:2446
#: appTools/ToolDblSided.py:965 appTools/ToolDblSided.py:976
#: appTools/ToolDistance.py:659 appTools/ToolDistance.py:670
#: appTools/ToolDistanceMin.py:324 appTools/ToolDistanceMin.py:335
#: appTools/ToolDrilling.py:2666 appTools/ToolDrilling.py:2677
#: appTools/ToolEtchCompensation.py:476 appTools/ToolEtchCompensation.py:487
#: appTools/ToolExtractDrills.py:732 appTools/ToolExtractDrills.py:743
#: appTools/ToolFiducials.py:950 appTools/ToolFiducials.py:961
#: appTools/ToolFilm.py:1454 appTools/ToolFilm.py:1465
#: appTools/ToolImage.py:322 appTools/ToolImage.py:333
#: appTools/ToolInvertGerber.py:304 appTools/ToolInvertGerber.py:315
#: appTools/ToolIsolation.py:3446 appTools/ToolIsolation.py:3457
#: appTools/ToolMilling.py:2341 appTools/ToolMilling.py:2352
#: appTools/ToolNCC.py:4390 appTools/ToolNCC.py:4401
#: appTools/ToolOptimal.py:614 appTools/ToolOptimal.py:625
#: appTools/ToolPaint.py:3266 appTools/ToolPaint.py:3277
#: appTools/ToolPanelize.py:914 appTools/ToolPanelize.py:925
#: appTools/ToolPcbWizard.py:488 appTools/ToolPcbWizard.py:499
#: appTools/ToolPunchGerber.py:1022 appTools/ToolPunchGerber.py:1033
#: appTools/ToolQRCode.py:923 appTools/ToolQRCode.py:934
#: appTools/ToolRulesCheck.py:1655 appTools/ToolRulesCheck.py:1666
#: appTools/ToolSolderPaste.py:1575 appTools/ToolSolderPaste.py:1586
#: appTools/ToolSub.py:770 appTools/ToolSub.py:781
#: appTools/ToolTransform.py:964 appTools/ToolTransform.py:975
msgid "Edited value is out of range"
msgstr "Edited value is out of range"

#: appDatabase.py:2300 appDatabase.py:2307 appEditors/AppExcEditor.py:4221
#: appEditors/AppExcEditor.py:4228 appEditors/appGCodeEditor.py:781
#: appEditors/appGCodeEditor.py:788 appGUI/ObjectUI.py:169
#: appGUI/ObjectUI.py:176 appTool.py:286 appTool.py:293
#: appTools/ToolAlignObjects.py:522 appTools/ToolAlignObjects.py:529
#: appTools/ToolCalculators.py:396 appTools/ToolCalculators.py:403
#: appTools/ToolCalibration.py:1401 appTools/ToolCalibration.py:1408
#: appTools/ToolCopperThieving.py:1601 appTools/ToolCopperThieving.py:1608
#: appTools/ToolCorners.py:468 appTools/ToolCorners.py:475
#: appTools/ToolCutOut.py:2441 appTools/ToolCutOut.py:2448
#: appTools/ToolDblSided.py:971 appTools/ToolDblSided.py:978
#: appTools/ToolDistance.py:665 appTools/ToolDistance.py:672
#: appTools/ToolDistanceMin.py:330 appTools/ToolDistanceMin.py:337
#: appTools/ToolDrilling.py:2672 appTools/ToolDrilling.py:2679
#: appTools/ToolEtchCompensation.py:482 appTools/ToolEtchCompensation.py:489
#: appTools/ToolExtractDrills.py:738 appTools/ToolExtractDrills.py:745
#: appTools/ToolFiducials.py:956 appTools/ToolFiducials.py:963
#: appTools/ToolFilm.py:1460 appTools/ToolFilm.py:1467
#: appTools/ToolImage.py:328 appTools/ToolImage.py:335
#: appTools/ToolInvertGerber.py:310 appTools/ToolInvertGerber.py:317
#: appTools/ToolIsolation.py:3452 appTools/ToolIsolation.py:3459
#: appTools/ToolMilling.py:2347 appTools/ToolMilling.py:2354
#: appTools/ToolNCC.py:4396 appTools/ToolNCC.py:4403
#: appTools/ToolOptimal.py:620 appTools/ToolOptimal.py:627
#: appTools/ToolPaint.py:3272 appTools/ToolPaint.py:3279
#: appTools/ToolPanelize.py:920 appTools/ToolPanelize.py:927
#: appTools/ToolPcbWizard.py:494 appTools/ToolPcbWizard.py:501
#: appTools/ToolPunchGerber.py:1028 appTools/ToolPunchGerber.py:1035
#: appTools/ToolQRCode.py:929 appTools/ToolQRCode.py:936
#: appTools/ToolRulesCheck.py:1661 appTools/ToolRulesCheck.py:1668
#: appTools/ToolSolderPaste.py:1581 appTools/ToolSolderPaste.py:1588
#: appTools/ToolSub.py:776 appTools/ToolSub.py:783
#: appTools/ToolTransform.py:970 appTools/ToolTransform.py:977
msgid "Edited value is within limits."
msgstr "Edited value is within limits."

#: appDatabase.py:2573 appTranslation.py:210 app_Main.py:3380 app_Main.py:6889
msgid "Save changes"
msgstr "Save changes"

#: appDatabase.py:3290
msgid ""
"To change tool properties select only one tool. Tools currently selected"
msgstr ""

#: appDatabase.py:3451 appTools/ToolDrilling.py:907
#, fuzzy
#| msgid "Tool Diameter."
msgid "Tools DB empty."
msgstr "Tool Diameter."

#: appEditors/AppExcEditor.py:51 appEditors/AppExcEditor.py:75
#: appEditors/AppExcEditor.py:169 appEditors/AppExcEditor.py:386
#: appEditors/AppExcEditor.py:589 appEditors/AppGerberEditor.py:241
#: appEditors/AppGerberEditor.py:248
msgid "Click to place ..."
msgstr "Click to place ..."

#: appEditors/AppExcEditor.py:59
msgid "To add a drill first select a tool"
msgstr "To add a drill first select a tool"

#: appEditors/AppExcEditor.py:123
msgid "Done. Drill added."
msgstr "Done. Drill added."

#: appEditors/AppExcEditor.py:177
msgid "To add an Drill Array first select a tool in Tool Table"
msgstr "To add an Drill Array first select a tool in Tool Table"

#: appEditors/AppExcEditor.py:193 appEditors/AppExcEditor.py:415
#: appEditors/AppExcEditor.py:636 appEditors/AppExcEditor.py:1151
#: appEditors/AppExcEditor.py:1178 appEditors/AppGerberEditor.py:471
#: appEditors/AppGerberEditor.py:1944 appEditors/AppGerberEditor.py:1974
msgid "Click on target location ..."
msgstr "Click on target location ..."

#: appEditors/AppExcEditor.py:212
msgid "Click on the Drill Circular Array Start position"
msgstr "Click on the Drill Circular Array Start position"

#: appEditors/AppExcEditor.py:234 appEditors/AppExcEditor.py:677
#: appEditors/AppGerberEditor.py:516
msgid "The value is not Float. Check for comma instead of dot separator."
msgstr "The value is not Float. Check for comma instead of dot separator."

#: appEditors/AppExcEditor.py:238
msgid "The value is mistyped. Check the value"
msgstr "The value is mistyped. Check the value"

#: appEditors/AppExcEditor.py:337
msgid "Too many drills for the selected spacing angle."
msgstr "Too many drills for the selected spacing angle."

#: appEditors/AppExcEditor.py:355
msgid "Done. Drill Array added."
msgstr "Done. Drill Array added."

#: appEditors/AppExcEditor.py:394
msgid "To add a slot first select a tool"
msgstr "To add a slot first select a tool"

#: appEditors/AppExcEditor.py:454 appEditors/AppExcEditor.py:461
#: appEditors/AppExcEditor.py:742 appEditors/AppExcEditor.py:749
msgid "Value is missing or wrong format. Add it and retry."
msgstr "Value is missing or wrong format. Add it and retry."

#: appEditors/AppExcEditor.py:559
msgid "Done. Adding Slot completed."
msgstr "Done. Adding Slot completed."

#: appEditors/AppExcEditor.py:597
msgid "To add an Slot Array first select a tool in Tool Table"
msgstr "To add an Slot Array first select a tool in Tool Table"

#: appEditors/AppExcEditor.py:655
msgid "Click on the Slot Circular Array Start position"
msgstr "Click on the Slot Circular Array Start position"

#: appEditors/AppExcEditor.py:680 appEditors/AppGerberEditor.py:519
msgid "The value is mistyped. Check the value."
msgstr "The value is mistyped. Check the value."

#: appEditors/AppExcEditor.py:859
msgid "Too many Slots for the selected spacing angle."
msgstr "Too many Slots for the selected spacing angle."

#: appEditors/AppExcEditor.py:882
msgid "Done. Slot Array added."
msgstr "Done. Slot Array added."

#: appEditors/AppExcEditor.py:904
msgid "Click on the Drill(s) to resize ..."
msgstr "Click on the Drill(s) to resize ..."

#: appEditors/AppExcEditor.py:934
msgid "Resize drill(s) failed. Please enter a diameter for resize."
msgstr "Resize drill(s) failed. Please enter a diameter for resize."

#: appEditors/AppExcEditor.py:1112
msgid "Done. Drill/Slot Resize completed."
msgstr "Done. Drill/Slot Resize completed."

#: appEditors/AppExcEditor.py:1115
msgid "Cancelled. No drills/slots selected for resize ..."
msgstr "Cancelled. No drills/slots selected for resize ..."

#: appEditors/AppExcEditor.py:1153 appEditors/AppGerberEditor.py:1946
msgid "Click on reference location ..."
msgstr "Click on reference location ..."

#: appEditors/AppExcEditor.py:1210
msgid "Done. Drill(s) Move completed."
msgstr "Done. Drill(s) Move completed."

#: appEditors/AppExcEditor.py:1318
msgid "Done. Drill(s) copied."
msgstr "Done. Drill(s) copied."

#: appEditors/AppExcEditor.py:1897 appObjects/FlatCAMExcellon.py:324
#: appTools/ToolDrilling.py:571 appTools/ToolMilling.py:494
msgid "Total Drills"
msgstr "Total Drills"

#: appEditors/AppExcEditor.py:1929 appObjects/FlatCAMExcellon.py:358
#: appTools/ToolDrilling.py:598 appTools/ToolMilling.py:521
msgid "Total Slots"
msgstr "Total Slots"

#: appEditors/AppExcEditor.py:2003 appObjects/FlatCAMGeometry.py:682
#: appObjects/FlatCAMGeometry.py:1172 appObjects/FlatCAMGeometry.py:1908
#: appObjects/FlatCAMGeometry.py:2567 appTools/ToolIsolation.py:1217
#: appTools/ToolIsolation.py:1667 appTools/ToolNCC.py:1150
#: appTools/ToolNCC.py:1284 appTools/ToolPaint.py:888
#: appTools/ToolPaint.py:1026 appTools/ToolPaint.py:1739
#: appTools/ToolSolderPaste.py:455 appTools/ToolSolderPaste.py:527
msgid "Wrong value format entered, use a number."
msgstr "Wrong value format entered, use a number."

#: appEditors/AppExcEditor.py:2014
msgid ""
"Tool already in the original or actual tool list.\n"
"Save and reedit Excellon if you need to add this tool. "
msgstr ""
"Tool already in the original or actual tool list.\n"
"Save and reedit Excellon if you need to add this tool. "

#: appEditors/AppExcEditor.py:2022 appGUI/MainGUI.py:3512
msgid "Added new tool with dia"
msgstr "Added new tool with dia"

#: appEditors/AppExcEditor.py:2055
msgid "Select a tool in Tool Table"
msgstr "Select a tool in Tool Table"

#: appEditors/AppExcEditor.py:2085
msgid "Deleted tool with diameter"
msgstr "Deleted tool with diameter"

#: appEditors/AppExcEditor.py:2232
msgid "Done. Tool edit completed."
msgstr "Done. Tool edit completed."

#: appEditors/AppExcEditor.py:2858
msgid "There are no Tools definitions in the file. Aborting Excellon creation."
msgstr ""
"There are no Tools definitions in the file. Aborting Excellon creation."

#: appEditors/AppExcEditor.py:2862
msgid "An internal error has ocurred. See Shell.\n"
msgstr "An internal error has ocurred. See Shell.\n"

#: appEditors/AppExcEditor.py:2867
msgid "Creating Excellon."
msgstr "Creating Excellon."

#: appEditors/AppExcEditor.py:2881
msgid "Excellon editing finished."
msgstr "Excellon editing finished."

#: appEditors/AppExcEditor.py:2897
msgid "Cancelled. There is no Tool/Drill selected"
msgstr "Cancelled. There is no Tool/Drill selected"

#: appEditors/AppExcEditor.py:3123 appEditors/AppExcEditor.py:3130
#: appEditors/AppGeoEditor.py:4233 appEditors/AppGeoEditor.py:4247
#: appEditors/AppGerberEditor.py:1085 appEditors/AppGerberEditor.py:1312
#: appEditors/AppGerberEditor.py:1497 appEditors/AppGerberEditor.py:1766
#: appEditors/AppGerberEditor.py:4625 appEditors/AppGerberEditor.py:4642
#: appGUI/MainGUI.py:2859 appGUI/MainGUI.py:2871
#: appTools/ToolAlignObjects.py:253 appTools/ToolAlignObjects.py:275
#: app_Main.py:4955 app_Main.py:5109
msgid "Done."
msgstr "Done."

#: appEditors/AppExcEditor.py:3491
msgid "Done. Drill(s) deleted."
msgstr "Done. Drill(s) deleted."

#: appEditors/AppExcEditor.py:3564 appEditors/AppExcEditor.py:3574
#: appEditors/AppGerberEditor.py:5073
msgid "Click on the circular array Center position"
msgstr "Click on the circular array Center position"

#: appEditors/AppExcEditor.py:3705 appGUI/ObjectUI.py:527
#: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:26
msgid "Excellon Editor"
msgstr "Excellon Editor"

#: appEditors/AppExcEditor.py:3712 appEditors/AppGerberEditor.py:2469
#: appEditors/appGCodeEditor.py:674
msgid "Name:"
msgstr "Name:"

#: appEditors/AppExcEditor.py:3718 appGUI/ObjectUI.py:542
#: appGUI/ObjectUI.py:843 appTools/ToolIsolation.py:2972
#: appTools/ToolNCC.py:3765 appTools/ToolPaint.py:2799
#: appTools/ToolSolderPaste.py:1155
msgid "Tools Table"
msgstr "Tools Table"

#: appEditors/AppExcEditor.py:3720 appGUI/ObjectUI.py:544
msgid ""
"Tools in this Excellon object\n"
"when are used for drilling."
msgstr ""
"Tools in this Excellon object\n"
"when are used for drilling."

#: appEditors/AppExcEditor.py:3741
#, fuzzy
#| msgid "Total Slots"
msgid "Convert Slots"
msgstr "Total Slots"

#: appEditors/AppExcEditor.py:3743
msgid "Convert the slots in the selected tools to drills."
msgstr ""

#: appEditors/AppExcEditor.py:3753
msgid "Add/Delete Tool"
msgstr "Add/Delete Tool"

#: appEditors/AppExcEditor.py:3755
msgid ""
"Add/Delete a tool to the tool list\n"
"for this Excellon object."
msgstr ""
"Add/Delete a tool to the tool list\n"
"for this Excellon object."

#: appEditors/AppExcEditor.py:3767 appGUI/ObjectUI.py:960
#: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:57
#: appTools/ToolIsolation.py:3055 appTools/ToolNCC.py:3860
msgid "Diameter for the new tool"
msgstr "Diameter for the new tool"

#: appEditors/AppExcEditor.py:3777
msgid "Add Tool"
msgstr "Add Tool"

#: appEditors/AppExcEditor.py:3779
msgid ""
"Add a new tool to the tool list\n"
"with the diameter specified above."
msgstr ""
"Add a new tool to the tool list\n"
"with the diameter specified above."

#: appEditors/AppExcEditor.py:3791
msgid "Delete Tool"
msgstr "Delete Tool"

#: appEditors/AppExcEditor.py:3793
msgid ""
"Delete a tool in the tool list\n"
"by selecting a row in the tool table."
msgstr ""
"Delete a tool in the tool list\n"
"by selecting a row in the tool table."

#: appEditors/AppExcEditor.py:3811 appGUI/MainGUI.py:4561
msgid "Resize Drill(s)"
msgstr "Resize Drill(s)"

#: appEditors/AppExcEditor.py:3813
msgid "Resize a drill or a selection of drills."
msgstr "Resize a drill or a selection of drills."

#: appEditors/AppExcEditor.py:3820
msgid "Resize Dia"
msgstr "Resize Dia"

#: appEditors/AppExcEditor.py:3822
msgid "Diameter to resize to."
msgstr "Diameter to resize to."

#: appEditors/AppExcEditor.py:3833
msgid "Resize"
msgstr "Resize"

#: appEditors/AppExcEditor.py:3835
msgid "Resize drill(s)"
msgstr "Resize drill(s)"

#: appEditors/AppExcEditor.py:3860 appGUI/MainGUI.py:1564
#: appGUI/MainGUI.py:4560
msgid "Add Drill Array"
msgstr "Add Drill Array"

#: appEditors/AppExcEditor.py:3862
msgid "Add an array of drills (linear or circular array)"
msgstr "Add an array of drills (linear or circular array)"

#: appEditors/AppExcEditor.py:3868
msgid ""
"Select the type of drills array to create.\n"
"It can be Linear X(Y) or Circular"
msgstr ""
"Select the type of drills array to create.\n"
"It can be Linear X(Y) or Circular"

#: appEditors/AppExcEditor.py:3871 appEditors/AppExcEditor.py:4085
#: appEditors/AppGerberEditor.py:2782
msgid "Linear"
msgstr "Linear"

#: appEditors/AppExcEditor.py:3872 appEditors/AppExcEditor.py:4086
#: appEditors/AppGerberEditor.py:2783
#: appGUI/preferences/tools/Tools2EDrillsPrefGroupUI.py:52
#: appGUI/preferences/tools/Tools2EDrillsPrefGroupUI.py:149
#: appGUI/preferences/tools/Tools2FiducialsPrefGroupUI.py:107
#: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:52
#: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:151
#: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:78
#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:61
#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:70
#: appTools/ToolExtractDrills.py:470 appTools/ToolExtractDrills.py:593
#: appTools/ToolFiducials.py:834 appTools/ToolPunchGerber.py:743
#: appTools/ToolPunchGerber.py:883
msgid "Circular"
msgstr "Circular"

#: appEditors/AppExcEditor.py:3880
#: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:68
msgid "Nr of drills"
msgstr "Nr of drills"

#: appEditors/AppExcEditor.py:3881
#: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:70
msgid "Specify how many drills to be in the array."
msgstr "Specify how many drills to be in the array."

#: appEditors/AppExcEditor.py:3899 appEditors/AppExcEditor.py:3949
#: appEditors/AppExcEditor.py:4021 appEditors/AppExcEditor.py:4114
#: appEditors/AppExcEditor.py:4165 appEditors/AppGerberEditor.py:1580
#: appEditors/AppGerberEditor.py:2811 appEditors/AppGerberEditor.py:2860
#: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:178
msgid "Direction"
msgstr "Direction"

#: appEditors/AppExcEditor.py:3901 appEditors/AppExcEditor.py:4116
#: appEditors/AppGerberEditor.py:2813
#: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:86
#: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:234
#: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:123
msgid ""
"Direction on which the linear array is oriented:\n"
"- 'X' - horizontal axis \n"
"- 'Y' - vertical axis or \n"
"- 'Angle' - a custom angle for the array inclination"
msgstr ""
"Direction on which the linear array is oriented:\n"
"- 'X' - horizontal axis \n"
"- 'Y' - vertical axis or \n"
"- 'Angle' - a custom angle for the array inclination"

#: appEditors/AppExcEditor.py:3908 appEditors/AppExcEditor.py:4030
#: appEditors/AppExcEditor.py:4123 appEditors/AppGerberEditor.py:2820
#: appGUI/GUIElements.py:3480
#: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:92
#: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:187
#: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:240
#: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:129
#: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:197
#: appTools/ToolFilm.py:1103
msgid "X"
msgstr "X"

#: appEditors/AppExcEditor.py:3909 appEditors/AppExcEditor.py:4031
#: appEditors/AppExcEditor.py:4124 appEditors/AppGerberEditor.py:2821
#: appGUI/GUIElements.py:3487
#: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:93
#: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:188
#: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:241
#: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:130
#: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:198
#: appTools/ToolFilm.py:1104
msgid "Y"
msgstr "Y"

#: appEditors/AppExcEditor.py:3910 appEditors/AppExcEditor.py:3927
#: appEditors/AppExcEditor.py:3961 appEditors/AppExcEditor.py:4032
#: appEditors/AppExcEditor.py:4036 appEditors/AppExcEditor.py:4125
#: appEditors/AppExcEditor.py:4143 appEditors/AppExcEditor.py:4177
#: appEditors/AppGeoEditor.py:683 appEditors/AppGerberEditor.py:2822
#: appEditors/AppGerberEditor.py:2839 appEditors/AppGerberEditor.py:2875
#: appEditors/AppGerberEditor.py:5393
#: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:94
#: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:113
#: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:189
#: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:194
#: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:242
#: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:263
#: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:131
#: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:149
#: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:96
#: appTools/ToolDistance.py:626 appTools/ToolDistanceMin.py:256
#: appTools/ToolTransform.py:617
msgid "Angle"
msgstr "Angle"

#: appEditors/AppExcEditor.py:3914 appEditors/AppExcEditor.py:4129
#: appEditors/AppGerberEditor.py:2826
#: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:100
#: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:248
#: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:137
msgid "Pitch"
msgstr "Pitch"

#: appEditors/AppExcEditor.py:3916 appEditors/AppExcEditor.py:4131
#: appEditors/AppGerberEditor.py:2828
#: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:102
#: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:250
#: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:139
msgid "Pitch = Distance between elements of the array."
msgstr "Pitch = Distance between elements of the array."

#: appEditors/AppExcEditor.py:3929 appEditors/AppExcEditor.py:4145
msgid ""
"Angle at which the linear array is placed.\n"
"The precision is of max 2 decimals.\n"
"Min value is: -360 degrees.\n"
"Max value is:  360.00 degrees."
msgstr ""
"Angle at which the linear array is placed.\n"
"The precision is of max 2 decimals.\n"
"Min value is: -360 degrees.\n"
"Max value is:  360.00 degrees."

#: appEditors/AppExcEditor.py:3950 appEditors/AppExcEditor.py:4166
#: appEditors/AppGerberEditor.py:2862
msgid ""
"Direction for circular array.Can be CW = clockwise or CCW = counter "
"clockwise."
msgstr ""
"Direction for circular array.Can be CW = clockwise or CCW = counter "
"clockwise."

#: appEditors/AppExcEditor.py:3957 appEditors/AppExcEditor.py:4173
#: appEditors/AppGerberEditor.py:2870
#: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:136
#: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:286
#: appGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:145
#: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:171
#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:366
msgid "CW"
msgstr "CW"

#: appEditors/AppExcEditor.py:3958 appEditors/AppExcEditor.py:4174
#: appEditors/AppGerberEditor.py:2871
#: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:137
#: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:287
#: appGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:146
#: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:172
#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:367
msgid "CCW"
msgstr "CCW"

#: appEditors/AppExcEditor.py:3962 appEditors/AppExcEditor.py:4178
#: appEditors/AppGerberEditor.py:2877
#: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:115
#: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:145
#: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:265
#: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:295
#: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:151
#: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:180
msgid "Angle at which each element in circular array is placed."
msgstr "Angle at which each element in circular array is placed."

#: appEditors/AppExcEditor.py:3996
msgid "Slot Parameters"
msgstr "Slot Parameters"

#: appEditors/AppExcEditor.py:3998
msgid ""
"Parameters for adding a slot (hole with oval shape)\n"
"either single or as an part of an array."
msgstr ""
"Parameters for adding a slot (hole with oval shape)\n"
"either single or as an part of an array."

#: appEditors/AppExcEditor.py:4007
#: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:162
#: appGUI/preferences/tools/ToolsCornersPrefGroupUI.py:56
#: appTools/ToolCorners.py:398 appTools/ToolProperties.py:575
msgid "Length"
msgstr "Length"

#: appEditors/AppExcEditor.py:4009
#: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:164
msgid "Length = The length of the slot."
msgstr "Length = The length of the slot."

#: appEditors/AppExcEditor.py:4023
#: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:180
msgid ""
"Direction on which the slot is oriented:\n"
"- 'X' - horizontal axis \n"
"- 'Y' - vertical axis or \n"
"- 'Angle' - a custom angle for the slot inclination"
msgstr ""
"Direction on which the slot is oriented:\n"
"- 'X' - horizontal axis \n"
"- 'Y' - vertical axis or \n"
"- 'Angle' - a custom angle for the slot inclination"

#: appEditors/AppExcEditor.py:4038
msgid ""
"Angle at which the slot is placed.\n"
"The precision is of max 2 decimals.\n"
"Min value is: -360 degrees.\n"
"Max value is:  360.00 degrees."
msgstr ""
"Angle at which the slot is placed.\n"
"The precision is of max 2 decimals.\n"
"Min value is: -360 degrees.\n"
"Max value is:  360.00 degrees."

#: appEditors/AppExcEditor.py:4071
msgid "Slot Array Parameters"
msgstr "Slot Array Parameters"

#: appEditors/AppExcEditor.py:4073
msgid "Parameters for the array of slots (linear or circular array)"
msgstr "Parameters for the array of slots (linear or circular array)"

#: appEditors/AppExcEditor.py:4082
msgid ""
"Select the type of slot array to create.\n"
"It can be Linear X(Y) or Circular"
msgstr ""
"Select the type of slot array to create.\n"
"It can be Linear X(Y) or Circular"

#: appEditors/AppExcEditor.py:4094
#: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:219
msgid "Nr of slots"
msgstr "Nr of slots"

#: appEditors/AppExcEditor.py:4095
#: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:221
msgid "Specify how many slots to be in the array."
msgstr "Specify how many slots to be in the array."

#: appEditors/AppExcEditor.py:4198 appEditors/AppGeoEditor.py:3301
#: appEditors/AppGerberEditor.py:2899 appEditors/appGCodeEditor.py:758
#, fuzzy
#| msgid "Exc Editor"
msgid "Exit Editor"
msgstr "Exc Editor"

#: appEditors/AppExcEditor.py:4201 appEditors/AppGeoEditor.py:3304
#: appEditors/AppGerberEditor.py:2902 appEditors/appGCodeEditor.py:761
#, fuzzy
#| msgid "Exc Editor"
msgid "Exit from Editor."
msgstr "Exc Editor"

#: appEditors/AppGeoEditor.py:84
msgid "Buffer distance:"
msgstr "Buffer distance:"

#: appEditors/AppGeoEditor.py:85
msgid "Buffer corner:"
msgstr "Buffer corner:"

#: appEditors/AppGeoEditor.py:87
msgid ""
"There are 3 types of corners:\n"
" - 'Round': the corner is rounded for exterior buffer.\n"
" - 'Square': the corner is met in a sharp angle for exterior buffer.\n"
" - 'Beveled': the corner is a line that directly connects the features "
"meeting in the corner"
msgstr ""
"There are 3 types of corners:\n"
" - 'Round': the corner is rounded for exterior buffer.\n"
" - 'Square': the corner is met in a sharp angle for exterior buffer.\n"
" - 'Beveled': the corner is a line that directly connects the features "
"meeting in the corner"

#: appEditors/AppGeoEditor.py:93 appEditors/AppGerberEditor.py:2638
msgid "Round"
msgstr "Round"

#: appEditors/AppGeoEditor.py:94 appEditors/AppGerberEditor.py:2639
#: appGUI/ObjectUI.py:1490
#: appGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:225
#: appGUI/preferences/tools/Tools2EDrillsPrefGroupUI.py:68
#: appGUI/preferences/tools/Tools2EDrillsPrefGroupUI.py:175
#: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:68
#: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:177
#: appGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:143
#: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:298
#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:327
#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:291
#: appTools/ToolDrilling.py:2588 appTools/ToolExtractDrills.py:486
#: appTools/ToolExtractDrills.py:619 appTools/ToolIsolation.py:3382
#: appTools/ToolMilling.py:2264 appTools/ToolNCC.py:4240
#: appTools/ToolPaint.py:3167 appTools/ToolPunchGerber.py:759
#: appTools/ToolPunchGerber.py:909 appTools/ToolQRCode.py:789
msgid "Square"
msgstr "Square"

#: appEditors/AppGeoEditor.py:95 appEditors/AppGerberEditor.py:2640
msgid "Beveled"
msgstr "Beveled"

#: appEditors/AppGeoEditor.py:102
msgid "Buffer Interior"
msgstr "Buffer Interior"

#: appEditors/AppGeoEditor.py:104
msgid "Buffer Exterior"
msgstr "Buffer Exterior"

#: appEditors/AppGeoEditor.py:110
msgid "Full Buffer"
msgstr "Full Buffer"

#: appEditors/AppGeoEditor.py:131 appEditors/AppGeoEditor.py:2959
#: appGUI/MainGUI.py:4470
#: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:191
msgid "Buffer Tool"
msgstr "Buffer Tool"

#: appEditors/AppGeoEditor.py:143 appEditors/AppGeoEditor.py:160
#: appEditors/AppGeoEditor.py:177 appEditors/AppGeoEditor.py:2978
#: appEditors/AppGeoEditor.py:3006 appEditors/AppGeoEditor.py:3034
#: appEditors/AppGerberEditor.py:5126
msgid "Buffer distance value is missing or wrong format. Add it and retry."
msgstr "Buffer distance value is missing or wrong format. Add it and retry."

#: appEditors/AppGeoEditor.py:241
msgid "Font"
msgstr "Font"

#: appEditors/AppGeoEditor.py:322 appGUI/MainGUI.py:1502
msgid "Text"
msgstr "Text"

#: appEditors/AppGeoEditor.py:348
msgid "Text Tool"
msgstr "Text Tool"

#: appEditors/AppGeoEditor.py:404 appGUI/MainGUI.py:511 appGUI/MainGUI.py:1245
#: appGUI/ObjectUI.py:1048 appObjects/FlatCAMExcellon.py:854
#: appObjects/FlatCAMGeometry.py:890 appTools/ToolDrilling.py:711
#: appTools/ToolDrilling.py:1033 appTools/ToolDrilling.py:2116
#: appTools/ToolIsolation.py:691 appTools/ToolIsolation.py:3128
#: appTools/ToolMilling.py:790 appTools/ToolMilling.py:1046
#: appTools/ToolMilling.py:1711 appTools/ToolNCC.py:324
#: appTools/ToolNCC.py:2230 appTools/ToolNCC.py:3932 appTools/ToolPaint.py:304
#: appTools/ToolPaint.py:2939
msgid "Tool"
msgstr "Tool"

#: appEditors/AppGeoEditor.py:438
msgid "Tool dia"
msgstr "Tool dia"

#: appEditors/AppGeoEditor.py:440
msgid "Diameter of the tool to be used in the operation."
msgstr "Diameter of the tool to be used in the operation."

#: appEditors/AppGeoEditor.py:486
msgid ""
"Algorithm to paint the polygons:\n"
"- Standard: Fixed step inwards.\n"
"- Seed-based: Outwards from seed.\n"
"- Line-based: Parallel lines."
msgstr ""
"Algorithm to paint the polygons:\n"
"- Standard: Fixed step inwards.\n"
"- Seed-based: Outwards from seed.\n"
"- Line-based: Parallel lines."

#: appEditors/AppGeoEditor.py:505
msgid "Connect:"
msgstr "Connect:"

#: appEditors/AppGeoEditor.py:515
msgid "Contour:"
msgstr "Contour:"

#: appEditors/AppGeoEditor.py:546 appGUI/MainGUI.py:935 appGUI/MainGUI.py:2090
#: appGUI/ObjectUI.py:1643 appTools/ToolPaint.py:228 appTools/ToolPaint.py:2729
msgid "Paint Tool"
msgstr "Paint Tool"

#: appEditors/AppGeoEditor.py:582 appEditors/AppGeoEditor.py:1071
#: appEditors/AppGeoEditor.py:2966 appEditors/AppGeoEditor.py:2994
#: appEditors/AppGeoEditor.py:3022 appEditors/AppGeoEditor.py:4390
#: appEditors/AppGerberEditor.py:5781
msgid "Cancelled. No shape selected."
msgstr "Cancelled. No shape selected."

#: appEditors/AppGeoEditor.py:595 appEditors/AppGeoEditor.py:2984
#: appEditors/AppGeoEditor.py:3012 appEditors/AppGeoEditor.py:3040
#: appGUI/preferences/geometry/GeometryGenPrefGroupUI.py:71
#: appTools/ToolProperties.py:117 appTools/ToolProperties.py:165
msgid "Tools"
msgstr "Tools"

#: appEditors/AppGeoEditor.py:606 appEditors/AppGeoEditor.py:1035
#: appEditors/AppGerberEditor.py:5316 appEditors/AppGerberEditor.py:5745
#: appGUI/MainGUI.py:960 appGUI/MainGUI.py:2115 appTools/ToolTransform.py:85
msgid "Transform Tool"
msgstr "Transform Tool"

#: appEditors/AppGeoEditor.py:607 appEditors/AppGeoEditor.py:699
#: appEditors/AppGerberEditor.py:5317 appEditors/AppGerberEditor.py:5409
#: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:88
#: appTools/ToolTransform.py:513 appTools/ToolTransform.py:633
msgid "Rotate"
msgstr "Rotate"

#: appEditors/AppGeoEditor.py:608 appEditors/AppGerberEditor.py:5318
#: appTools/ToolTransform.py:514
msgid "Skew/Shear"
msgstr "Skew/Shear"

#: appEditors/AppGeoEditor.py:609 appEditors/AppGerberEditor.py:2687
#: appEditors/AppGerberEditor.py:5319 appGUI/MainGUI.py:1082
#: appGUI/MainGUI.py:1549 appGUI/MainGUI.py:2237 appGUI/MainGUI.py:4682
#: appGUI/ObjectUI.py:125
#: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:147
#: appTools/ToolTransform.py:515
msgid "Scale"
msgstr "Scale"

#: appEditors/AppGeoEditor.py:610 appEditors/AppGerberEditor.py:5320
#: appTools/ToolTransform.py:516
msgid "Mirror (Flip)"
msgstr "Mirror (Flip)"

#: appEditors/AppGeoEditor.py:612 appEditors/AppGerberEditor.py:2647
#: appEditors/AppGerberEditor.py:5322 appGUI/MainGUI.py:1080
#: appGUI/MainGUI.py:1504 appGUI/MainGUI.py:1547 appGUI/MainGUI.py:2235
#: appGUI/MainGUI.py:4680
#: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:212
#: appTools/ToolTransform.py:518
msgid "Buffer"
msgstr "Buffer"

#: appEditors/AppGeoEditor.py:643 appEditors/AppGerberEditor.py:5353
#: appGUI/GUIElements.py:2957
#: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:169
#: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:44
#: appTools/ToolDblSided.py:688 appTools/ToolDblSided.py:864
#: appTools/ToolFilm.py:1060 appTools/ToolTransform.py:547
msgid "Reference"
msgstr "Reference"

#: appEditors/AppGeoEditor.py:645 appEditors/AppGerberEditor.py:5355
msgid ""
"The reference point for Rotate, Skew, Scale, Mirror.\n"
"Can be:\n"
"- Origin -> it is the 0, 0 point\n"
"- Selection -> the center of the bounding box of the selected objects\n"
"- Point -> a custom point defined by X,Y coordinates\n"
"- Min Selection -> the point (minx, miny) of the bounding box of the "
"selection"
msgstr ""
"The reference point for Rotate, Skew, Scale, Mirror.\n"
"Can be:\n"
"- Origin -> it is the 0, 0 point\n"
"- Selection -> the center of the bounding box of the selected objects\n"
"- Point -> a custom point defined by X,Y coordinates\n"
"- Min Selection -> the point (minx, miny) of the bounding box of the "
"selection"

#: appEditors/AppGeoEditor.py:653 appEditors/AppGerberEditor.py:5363
#: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:54
#: appTools/ToolCalibration.py:126 appTools/ToolCalibration.py:127
#: appTools/ToolTransform.py:557
msgid "Origin"
msgstr "Origin"

#: appEditors/AppGeoEditor.py:653 appEditors/AppGeoEditor.py:1044
#: appEditors/AppGerberEditor.py:5363 appEditors/AppGerberEditor.py:5754
#: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:250
#: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:275
#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:311
#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:258
#: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:54
#: appTools/ToolIsolation.py:3320 appTools/ToolNCC.py:4196
#: appTools/ToolPaint.py:3096 appTools/ToolTransform.py:557 defaults.py:559
msgid "Selection"
msgstr "Selection"

#: appEditors/AppGeoEditor.py:653 appEditors/AppGerberEditor.py:5363
#: appGUI/preferences/tools/Tools2sidedPrefGroupUI.py:85
#: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:54
#: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:60
#: appTools/ToolDblSided.py:699 appTools/ToolTransform.py:557
msgid "Point"
msgstr "Point"

#: appEditors/AppGeoEditor.py:653 appEditors/AppGerberEditor.py:5363
msgid "Minimum"
msgstr "Minimum"

#: appEditors/AppGeoEditor.py:659 appEditors/AppGeoEditor.py:955
#: appEditors/AppGerberEditor.py:5369 appEditors/AppGerberEditor.py:5665
#: appGUI/preferences/tools/Tools2EDrillsPrefGroupUI.py:131
#: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:133
#: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:243
#: appTools/ToolExtractDrills.py:556 appTools/ToolExtractDrills.py:677
#: appTools/ToolPunchGerber.py:846 appTools/ToolPunchGerber.py:962
#: appTools/ToolTransform.py:563 appTools/ToolTransform.py:889
#: app_Main.py:10188
msgid "Value"
msgstr "Value"

#: appEditors/AppGeoEditor.py:661 appEditors/AppGerberEditor.py:5371
#: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:62
#: appTools/ToolTransform.py:565
msgid "A point of reference in format X,Y."
msgstr "A point of reference in format X,Y."

#: appEditors/AppGeoEditor.py:668 appEditors/AppGerberEditor.py:2590
#: appEditors/AppGerberEditor.py:5378 appGUI/ObjectUI.py:2175
#: appTools/ToolDblSided.py:713 appTools/ToolDblSided.py:901
#: appTools/ToolNCC.py:63 appTools/ToolPaint.py:137
#: appTools/ToolSolderPaste.py:160 appTools/ToolSolderPaste.py:1203
#: appTools/ToolTransform.py:572 app_Main.py:6121
msgid "Add"
msgstr "Add"

#: appEditors/AppGeoEditor.py:670 appEditors/AppGerberEditor.py:5380
#: appTools/ToolTransform.py:574
msgid "Add point coordinates from clipboard."
msgstr "Add point coordinates from clipboard."

#: appEditors/AppGeoEditor.py:685 appEditors/AppGerberEditor.py:5395
#: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:98
#: appTools/ToolTransform.py:619
msgid ""
"Angle for Rotation action, in degrees.\n"
"Float number between -360 and 359.\n"
"Positive numbers for CW motion.\n"
"Negative numbers for CCW motion."
msgstr ""
"Angle for Rotation action, in degrees.\n"
"Float number between -360 and 359.\n"
"Positive numbers for CW motion.\n"
"Negative numbers for CCW motion."

#: appEditors/AppGeoEditor.py:701 appEditors/AppGerberEditor.py:5411
#: appTools/ToolTransform.py:635
msgid ""
"Rotate the selected object(s).\n"
"The point of reference is the middle of\n"
"the bounding box for all selected objects."
msgstr ""
"Rotate the selected object(s).\n"
"The point of reference is the middle of\n"
"the bounding box for all selected objects."

#: appEditors/AppGeoEditor.py:721 appEditors/AppGeoEditor.py:783
#: appEditors/AppGerberEditor.py:5431 appEditors/AppGerberEditor.py:5493
#: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:112
#: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:151
#: appTools/ToolTransform.py:655 appTools/ToolTransform.py:717
msgid "Link"
msgstr "Link"

#: appEditors/AppGeoEditor.py:723 appEditors/AppGeoEditor.py:785
#: appEditors/AppGerberEditor.py:5433 appEditors/AppGerberEditor.py:5495
#: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:114
#: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:153
#: appTools/ToolTransform.py:657 appTools/ToolTransform.py:719
msgid "Link the Y entry to X entry and copy its content."
msgstr "Link the Y entry to X entry and copy its content."

#: appEditors/AppGeoEditor.py:728 appEditors/AppGerberEditor.py:5438
#: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:151
#: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:124
#: appTools/ToolFilm.py:1042 appTools/ToolTransform.py:662
msgid "X angle"
msgstr "X angle"

#: appEditors/AppGeoEditor.py:730 appEditors/AppGeoEditor.py:751
#: appEditors/AppGerberEditor.py:5440 appEditors/AppGerberEditor.py:5461
#: appTools/ToolTransform.py:664 appTools/ToolTransform.py:685
msgid ""
"Angle for Skew action, in degrees.\n"
"Float number between -360 and 360."
msgstr ""
"Angle for Skew action, in degrees.\n"
"Float number between -360 and 360."

#: appEditors/AppGeoEditor.py:738 appEditors/AppGerberEditor.py:5448
#: appTools/ToolTransform.py:672
msgid "Skew X"
msgstr "Skew X"

#: appEditors/AppGeoEditor.py:740 appEditors/AppGeoEditor.py:761
#: appEditors/AppGerberEditor.py:5450 appEditors/AppGerberEditor.py:5471
#: appTools/ToolTransform.py:674 appTools/ToolTransform.py:695
msgid ""
"Skew/shear the selected object(s).\n"
"The point of reference is the middle of\n"
"the bounding box for all selected objects."
msgstr ""
"Skew/shear the selected object(s).\n"
"The point of reference is the middle of\n"
"the bounding box for all selected objects."

#: appEditors/AppGeoEditor.py:749 appEditors/AppGerberEditor.py:5459
#: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:160
#: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:138
#: appTools/ToolFilm.py:1051 appTools/ToolTransform.py:683
msgid "Y angle"
msgstr "Y angle"

#: appEditors/AppGeoEditor.py:759 appEditors/AppGerberEditor.py:5469
#: appTools/ToolTransform.py:693
msgid "Skew Y"
msgstr "Skew Y"

#: appEditors/AppGeoEditor.py:790 appEditors/AppGerberEditor.py:5500
#: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:120
#: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:162
#: appTools/ToolFilm.py:998 appTools/ToolTransform.py:724
msgid "X factor"
msgstr "X factor"

#: appEditors/AppGeoEditor.py:792 appEditors/AppGerberEditor.py:5502
#: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:164
#: appTools/ToolTransform.py:726
msgid "Factor for scaling on X axis."
msgstr "Factor for scaling on X axis."

#: appEditors/AppGeoEditor.py:799 appEditors/AppGerberEditor.py:5509
#: appTools/ToolTransform.py:733
msgid "Scale X"
msgstr "Scale X"

#: appEditors/AppGeoEditor.py:801 appEditors/AppGeoEditor.py:821
#: appEditors/AppGerberEditor.py:5511 appEditors/AppGerberEditor.py:5531
#: appTools/ToolTransform.py:735 appTools/ToolTransform.py:755
msgid ""
"Scale the selected object(s).\n"
"The point of reference depends on \n"
"the Scale reference checkbox state."
msgstr ""
"Scale the selected object(s).\n"
"The point of reference depends on \n"
"the Scale reference checkbox state."

#: appEditors/AppGeoEditor.py:810 appEditors/AppGerberEditor.py:5520
#: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:129
#: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:175
#: appTools/ToolFilm.py:1007 appTools/ToolTransform.py:744
msgid "Y factor"
msgstr "Y factor"

#: appEditors/AppGeoEditor.py:812 appEditors/AppGerberEditor.py:5522
#: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:177
#: appTools/ToolTransform.py:746
msgid "Factor for scaling on Y axis."
msgstr "Factor for scaling on Y axis."

#: appEditors/AppGeoEditor.py:819 appEditors/AppGerberEditor.py:5529
#: appTools/ToolTransform.py:753
msgid "Scale Y"
msgstr "Scale Y"

#: appEditors/AppGeoEditor.py:846 appEditors/AppGerberEditor.py:5556
#: appTools/ToolTransform.py:780
msgid "Flip on X"
msgstr "Flip on X"

#: appEditors/AppGeoEditor.py:848 appEditors/AppGeoEditor.py:853
#: appEditors/AppGerberEditor.py:5558 appEditors/AppGerberEditor.py:5563
#: appTools/ToolTransform.py:782 appTools/ToolTransform.py:787
msgid "Flip the selected object(s) over the X axis."
msgstr "Flip the selected object(s) over the X axis."

#: appEditors/AppGeoEditor.py:851 appEditors/AppGerberEditor.py:5561
#: appTools/ToolTransform.py:785
msgid "Flip on Y"
msgstr "Flip on Y"

#: appEditors/AppGeoEditor.py:871 appEditors/AppGerberEditor.py:5581
#: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:191
#: appTools/ToolTransform.py:805
msgid "X val"
msgstr "X val"

#: appEditors/AppGeoEditor.py:873 appEditors/AppGerberEditor.py:5583
#: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:193
#: appTools/ToolTransform.py:807
msgid "Distance to offset on X axis. In current units."
msgstr "Distance to offset on X axis. In current units."

#: appEditors/AppGeoEditor.py:880 appEditors/AppGerberEditor.py:5590
#: appTools/ToolTransform.py:814
msgid "Offset X"
msgstr "Offset X"

#: appEditors/AppGeoEditor.py:882 appEditors/AppGeoEditor.py:902
#: appEditors/AppGerberEditor.py:5592 appEditors/AppGerberEditor.py:5612
#: appTools/ToolTransform.py:816 appTools/ToolTransform.py:836
msgid ""
"Offset the selected object(s).\n"
"The point of reference is the middle of\n"
"the bounding box for all selected objects.\n"
msgstr ""
"Offset the selected object(s).\n"
"The point of reference is the middle of\n"
"the bounding box for all selected objects.\n"

#: appEditors/AppGeoEditor.py:891 appEditors/AppGerberEditor.py:5601
#: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:204
#: appTools/ToolTransform.py:825
msgid "Y val"
msgstr "Y val"

#: appEditors/AppGeoEditor.py:893 appEditors/AppGerberEditor.py:5603
#: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:206
#: appTools/ToolTransform.py:827
msgid "Distance to offset on Y axis. In current units."
msgstr "Distance to offset on Y axis. In current units."

#: appEditors/AppGeoEditor.py:900 appEditors/AppGerberEditor.py:5610
#: appTools/ToolTransform.py:834
msgid "Offset Y"
msgstr "Offset Y"

#: appEditors/AppGeoEditor.py:920 appEditors/AppGerberEditor.py:5630
#: appGUI/ObjectUI.py:410 appGUI/ObjectUI.py:447
#: appGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:142
#: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:216
#: appTools/ToolQRCode.py:788 appTools/ToolTransform.py:854
msgid "Rounded"
msgstr "Rounded"

#: appEditors/AppGeoEditor.py:922 appEditors/AppGerberEditor.py:5632
#: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:218
#: appTools/ToolTransform.py:856
msgid ""
"If checked then the buffer will surround the buffered shape,\n"
"every corner will be rounded.\n"
"If not checked then the buffer will follow the exact geometry\n"
"of the buffered shape."
msgstr ""
"If checked then the buffer will surround the buffered shape,\n"
"every corner will be rounded.\n"
"If not checked then the buffer will follow the exact geometry\n"
"of the buffered shape."

#: appEditors/AppGeoEditor.py:930 appEditors/AppGerberEditor.py:5640
#: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:226
#: appTools/ToolDistance.py:408 appTools/ToolDistanceMin.py:199
#: appTools/ToolTransform.py:864
msgid "Distance"
msgstr "Distance"

#: appEditors/AppGeoEditor.py:932 appEditors/AppGerberEditor.py:5642
#: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:228
#: appTools/ToolTransform.py:866
msgid ""
"A positive value will create the effect of dilation,\n"
"while a negative value will create the effect of erosion.\n"
"Each geometry element of the object will be increased\n"
"or decreased with the 'distance'."
msgstr ""
"A positive value will create the effect of dilation,\n"
"while a negative value will create the effect of erosion.\n"
"Each geometry element of the object will be increased\n"
"or decreased with the 'distance'."

#: appEditors/AppGeoEditor.py:944 appEditors/AppGerberEditor.py:5654
#: appTools/ToolTransform.py:878
msgid "Buffer D"
msgstr "Buffer D"

#: appEditors/AppGeoEditor.py:946 appEditors/AppGerberEditor.py:5656
#: appTools/ToolTransform.py:880
msgid ""
"Create the buffer effect on each geometry,\n"
"element from the selected object, using the distance."
msgstr ""
"Create the buffer effect on each geometry,\n"
"element from the selected object, using the distance."

#: appEditors/AppGeoEditor.py:957 appEditors/AppGerberEditor.py:5667
#: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:245
#: appTools/ToolTransform.py:891
msgid ""
"A positive value will create the effect of dilation,\n"
"while a negative value will create the effect of erosion.\n"
"Each geometry element of the object will be increased\n"
"or decreased to fit the 'Value'. Value is a percentage\n"
"of the initial dimension."
msgstr ""
"A positive value will create the effect of dilation,\n"
"while a negative value will create the effect of erosion.\n"
"Each geometry element of the object will be increased\n"
"or decreased to fit the 'Value'. Value is a percentage\n"
"of the initial dimension."

#: appEditors/AppGeoEditor.py:970 appEditors/AppGerberEditor.py:5680
#: appTools/ToolTransform.py:904
msgid "Buffer F"
msgstr "Buffer F"

#: appEditors/AppGeoEditor.py:972 appEditors/AppGerberEditor.py:5682
#: appTools/ToolTransform.py:906
msgid ""
"Create the buffer effect on each geometry,\n"
"element from the selected object, using the factor."
msgstr ""
"Create the buffer effect on each geometry,\n"
"element from the selected object, using the factor."

#: appEditors/AppGeoEditor.py:1043 appEditors/AppGerberEditor.py:5753
#: appGUI/ObjectUI.py:1444 appGUI/preferences/tools/Tools2CalPrefGroupUI.py:48
#: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:54
#: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:70
#: appTools/ToolCalibration.py:881 appTools/ToolDrilling.py:2540
#: appTools/ToolFilm.py:931 appTools/ToolMilling.py:2218
#: appTools/ToolNCC.py:3754 appTools/ToolPaint.py:2787
#: appTools/ToolPanelize.py:697 appTools/ToolTransform.py:557
msgid "Object"
msgstr "Object"

#: appEditors/AppGeoEditor.py:1107 appEditors/AppGeoEditor.py:1130
#: appEditors/AppGeoEditor.py:1276 appEditors/AppGeoEditor.py:1301
#: appEditors/AppGeoEditor.py:1335 appEditors/AppGeoEditor.py:1370
#: appEditors/AppGeoEditor.py:1401 appEditors/AppGerberEditor.py:5817
#: appEditors/AppGerberEditor.py:5840 appEditors/AppGerberEditor.py:5985
#: appEditors/AppGerberEditor.py:6018 appEditors/AppGerberEditor.py:6061
#: appEditors/AppGerberEditor.py:6102 appEditors/AppGerberEditor.py:6138
msgid "No shape selected."
msgstr "No shape selected."

#: appEditors/AppGeoEditor.py:1115 appEditors/AppGerberEditor.py:5825
#: appTools/ToolTransform.py:150
msgid "Incorrect format for Point value. Needs format X,Y"
msgstr "Incorrect format for Point value. Needs format X,Y"

#: appEditors/AppGeoEditor.py:1140 appEditors/AppGerberEditor.py:5850
#: appTools/ToolTransform.py:167
msgid "Rotate transformation can not be done for a value of 0."
msgstr "Rotate transformation can not be done for a value of 0."

#: appEditors/AppGeoEditor.py:1198 appEditors/AppGeoEditor.py:1219
#: appEditors/AppGerberEditor.py:5908 appEditors/AppGerberEditor.py:5929
#: appTools/ToolTransform.py:225 appTools/ToolTransform.py:246
msgid "Scale transformation can not be done for a factor of 0 or 1."
msgstr "Scale transformation can not be done for a factor of 0 or 1."

#: appEditors/AppGeoEditor.py:1232 appEditors/AppGeoEditor.py:1241
#: appEditors/AppGerberEditor.py:5942 appEditors/AppGerberEditor.py:5951
#: appTools/ToolTransform.py:259 appTools/ToolTransform.py:268
msgid "Offset transformation can not be done for a value of 0."
msgstr "Offset transformation can not be done for a value of 0."

#: appEditors/AppGeoEditor.py:1271 appEditors/AppGerberEditor.py:5988
#: appTools/ToolTransform.py:296
msgid "Appying Rotate"
msgstr "Appying Rotate"

#: appEditors/AppGeoEditor.py:1284 appEditors/AppGerberEditor.py:6000
msgid "Done. Rotate completed."
msgstr "Done. Rotate completed."

#: appEditors/AppGeoEditor.py:1286
msgid "Rotation action was not executed"
msgstr "Rotation action was not executed"

#: appEditors/AppGeoEditor.py:1304 appEditors/AppGerberEditor.py:6021
#: appTools/ToolTransform.py:322
msgid "Applying Flip"
msgstr "Applying Flip"

#: appEditors/AppGeoEditor.py:1312 appEditors/AppGerberEditor.py:6033
#: appTools/ToolTransform.py:339
msgid "Flip on the Y axis done"
msgstr "Flip on the Y axis done"

#: appEditors/AppGeoEditor.py:1315 appEditors/AppGerberEditor.py:6041
#: appTools/ToolTransform.py:348
msgid "Flip on the X axis done"
msgstr "Flip on the X axis done"

#: appEditors/AppGeoEditor.py:1319
msgid "Flip action was not executed"
msgstr "Flip action was not executed"

#: appEditors/AppGeoEditor.py:1338 appEditors/AppGerberEditor.py:6064
#: appTools/ToolTransform.py:369
msgid "Applying Skew"
msgstr "Applying Skew"

#: appEditors/AppGeoEditor.py:1347 appEditors/AppGerberEditor.py:6080
msgid "Skew on the X axis done"
msgstr "Skew on the X axis done"

#: appEditors/AppGeoEditor.py:1349 appEditors/AppGerberEditor.py:6082
msgid "Skew on the Y axis done"
msgstr "Skew on the Y axis done"

#: appEditors/AppGeoEditor.py:1352
msgid "Skew action was not executed"
msgstr "Skew action was not executed"

#: appEditors/AppGeoEditor.py:1373 appEditors/AppGerberEditor.py:6105
#: appTools/ToolTransform.py:396
msgid "Applying Scale"
msgstr "Applying Scale"

#: appEditors/AppGeoEditor.py:1382 appEditors/AppGerberEditor.py:6118
msgid "Scale on the X axis done"
msgstr "Scale on the X axis done"

#: appEditors/AppGeoEditor.py:1384 appEditors/AppGerberEditor.py:6120
msgid "Scale on the Y axis done"
msgstr "Scale on the Y axis done"

#: appEditors/AppGeoEditor.py:1386
msgid "Scale action was not executed"
msgstr "Scale action was not executed"

#: appEditors/AppGeoEditor.py:1404 appEditors/AppGerberEditor.py:6141
#: appTools/ToolTransform.py:424
msgid "Applying Offset"
msgstr "Applying Offset"

#: appEditors/AppGeoEditor.py:1414 appEditors/AppGerberEditor.py:6162
msgid "Offset on the X axis done"
msgstr "Offset on the X axis done"

#: appEditors/AppGeoEditor.py:1416 appEditors/AppGerberEditor.py:6164
msgid "Offset on the Y axis done"
msgstr "Offset on the Y axis done"

#: appEditors/AppGeoEditor.py:1419
msgid "Offset action was not executed"
msgstr "Offset action was not executed"

#: appEditors/AppGeoEditor.py:1426 appEditors/AppGerberEditor.py:6174
msgid "No shape selected"
msgstr "No shape selected"

#: appEditors/AppGeoEditor.py:1429 appEditors/AppGerberEditor.py:6177
#: appTools/ToolTransform.py:453
msgid "Applying Buffer"
msgstr "Applying Buffer"

#: appEditors/AppGeoEditor.py:1436 appEditors/AppGerberEditor.py:6199
#: appTools/ToolTransform.py:474
msgid "Buffer done"
msgstr "Buffer done"

#: appEditors/AppGeoEditor.py:1440 appEditors/AppGerberEditor.py:6203
#: appTools/ToolTransform.py:443 appTools/ToolTransform.py:478
msgid "Action was not executed, due of"
msgstr "Action was not executed, due of"

#: appEditors/AppGeoEditor.py:1444 appEditors/AppGerberEditor.py:6207
msgid "Rotate ..."
msgstr "Rotate ..."

#: appEditors/AppGeoEditor.py:1445 appEditors/AppGeoEditor.py:1494
#: appEditors/AppGeoEditor.py:1509 appEditors/AppGerberEditor.py:6208
#: appEditors/AppGerberEditor.py:6257 appEditors/AppGerberEditor.py:6272
msgid "Enter an Angle Value (degrees)"
msgstr "Enter an Angle Value (degrees)"

#: appEditors/AppGeoEditor.py:1453 appEditors/AppGerberEditor.py:6216
msgid "Geometry shape rotate done"
msgstr "Geometry shape rotate done"

#: appEditors/AppGeoEditor.py:1456 appEditors/AppGerberEditor.py:6219
msgid "Geometry shape rotate cancelled"
msgstr "Geometry shape rotate cancelled"

#: appEditors/AppGeoEditor.py:1461 appEditors/AppGerberEditor.py:6224
msgid "Offset on X axis ..."
msgstr "Offset on X axis ..."

#: appEditors/AppGeoEditor.py:1462 appEditors/AppGeoEditor.py:1479
#: appEditors/AppGerberEditor.py:6225 appEditors/AppGerberEditor.py:6242
msgid "Enter a distance Value"
msgstr "Enter a distance Value"

#: appEditors/AppGeoEditor.py:1470 appEditors/AppGerberEditor.py:6233
msgid "Geometry shape offset on X axis done"
msgstr "Geometry shape offset on X axis done"

#: appEditors/AppGeoEditor.py:1473 appEditors/AppGerberEditor.py:6236
msgid "Geometry shape offset X cancelled"
msgstr "Geometry shape offset X cancelled"

#: appEditors/AppGeoEditor.py:1478 appEditors/AppGerberEditor.py:6241
msgid "Offset on Y axis ..."
msgstr "Offset on Y axis ..."

#: appEditors/AppGeoEditor.py:1487 appEditors/AppGerberEditor.py:6250
msgid "Geometry shape offset on Y axis done"
msgstr "Geometry shape offset on Y axis done"

#: appEditors/AppGeoEditor.py:1490
msgid "Geometry shape offset on Y axis canceled"
msgstr "Geometry shape offset on Y axis canceled"

#: appEditors/AppGeoEditor.py:1493 appEditors/AppGerberEditor.py:6256
msgid "Skew on X axis ..."
msgstr "Skew on X axis ..."

#: appEditors/AppGeoEditor.py:1502 appEditors/AppGerberEditor.py:6265
msgid "Geometry shape skew on X axis done"
msgstr "Geometry shape skew on X axis done"

#: appEditors/AppGeoEditor.py:1505
msgid "Geometry shape skew on X axis canceled"
msgstr "Geometry shape skew on X axis canceled"

#: appEditors/AppGeoEditor.py:1508 appEditors/AppGerberEditor.py:6271
msgid "Skew on Y axis ..."
msgstr "Skew on Y axis ..."

#: appEditors/AppGeoEditor.py:1517 appEditors/AppGerberEditor.py:6280
msgid "Geometry shape skew on Y axis done"
msgstr "Geometry shape skew on Y axis done"

#: appEditors/AppGeoEditor.py:1520
msgid "Geometry shape skew on Y axis canceled"
msgstr "Geometry shape skew on Y axis canceled"

#: appEditors/AppGeoEditor.py:1950 appEditors/AppGeoEditor.py:2021
#: appEditors/AppGerberEditor.py:1444 appEditors/AppGerberEditor.py:1522
msgid "Click on Center point ..."
msgstr "Click on Center point ..."

#: appEditors/AppGeoEditor.py:1963 appEditors/AppGerberEditor.py:1454
msgid "Click on Perimeter point to complete ..."
msgstr "Click on Perimeter point to complete ..."

#: appEditors/AppGeoEditor.py:1995
msgid "Done. Adding Circle completed."
msgstr "Done. Adding Circle completed."

#: appEditors/AppGeoEditor.py:2049 appEditors/AppGerberEditor.py:1555
msgid "Click on Start point ..."
msgstr "Click on Start point ..."

#: appEditors/AppGeoEditor.py:2051 appEditors/AppGerberEditor.py:1557
msgid "Click on Point3 ..."
msgstr "Click on Point3 ..."

#: appEditors/AppGeoEditor.py:2053 appEditors/AppGerberEditor.py:1559
msgid "Click on Stop point ..."
msgstr "Click on Stop point ..."

#: appEditors/AppGeoEditor.py:2058 appEditors/AppGerberEditor.py:1564
msgid "Click on Stop point to complete ..."
msgstr "Click on Stop point to complete ..."

#: appEditors/AppGeoEditor.py:2060 appEditors/AppGerberEditor.py:1566
msgid "Click on Point2 to complete ..."
msgstr "Click on Point2 to complete ..."

#: appEditors/AppGeoEditor.py:2062 appEditors/AppGerberEditor.py:1568
msgid "Click on Center point to complete ..."
msgstr "Click on Center point to complete ..."

#: appEditors/AppGeoEditor.py:2074
#, python-format
msgid "Direction: %s"
msgstr "Direction: %s"

#: appEditors/AppGeoEditor.py:2088 appEditors/AppGerberEditor.py:1594
msgid "Mode: Start -> Stop -> Center. Click on Start point ..."
msgstr "Mode: Start -> Stop -> Center. Click on Start point ..."

#: appEditors/AppGeoEditor.py:2091 appEditors/AppGerberEditor.py:1597
msgid "Mode: Point1 -> Point3 -> Point2. Click on Point1 ..."
msgstr "Mode: Point1 -> Point3 -> Point2. Click on Point1 ..."

#: appEditors/AppGeoEditor.py:2094 appEditors/AppGerberEditor.py:1600
msgid "Mode: Center -> Start -> Stop. Click on Center point ..."
msgstr "Mode: Center -> Start -> Stop. Click on Center point ..."

#: appEditors/AppGeoEditor.py:2235
msgid "Done. Arc completed."
msgstr "Done. Arc completed."

#: appEditors/AppGeoEditor.py:2266 appEditors/AppGeoEditor.py:2339
msgid "Click on 1st corner ..."
msgstr "Click on 1st corner ..."

#: appEditors/AppGeoEditor.py:2278
msgid "Click on opposite corner to complete ..."
msgstr "Click on opposite corner to complete ..."

#: appEditors/AppGeoEditor.py:2308
msgid "Done. Rectangle completed."
msgstr "Done. Rectangle completed."

#: appEditors/AppGeoEditor.py:2383
msgid "Done. Polygon completed."
msgstr "Done. Polygon completed."

#: appEditors/AppGeoEditor.py:2397 appEditors/AppGeoEditor.py:2462
#: appEditors/AppGerberEditor.py:1102 appEditors/AppGerberEditor.py:1322
msgid "Backtracked one point ..."
msgstr "Backtracked one point ..."

#: appEditors/AppGeoEditor.py:2440
msgid "Done. Path completed."
msgstr "Done. Path completed."

#: appEditors/AppGeoEditor.py:2599
msgid "No shape selected. Select a shape to explode"
msgstr "No shape selected. Select a shape to explode"

#: appEditors/AppGeoEditor.py:2632
msgid "Done. Polygons exploded into lines."
msgstr "Done. Polygons exploded into lines."

#: appEditors/AppGeoEditor.py:2664
msgid "MOVE: No shape selected. Select a shape to move"
msgstr "MOVE: No shape selected. Select a shape to move"

#: appEditors/AppGeoEditor.py:2667 appEditors/AppGeoEditor.py:2687
msgid " MOVE: Click on reference point ..."
msgstr " MOVE: Click on reference point ..."

#: appEditors/AppGeoEditor.py:2672
msgid " Click on destination point ..."
msgstr " Click on destination point ..."

#: appEditors/AppGeoEditor.py:2712
msgid "Done. Geometry(s) Move completed."
msgstr "Done. Geometry(s) Move completed."

#: appEditors/AppGeoEditor.py:2845
msgid "Done. Geometry(s) Copy completed."
msgstr "Done. Geometry(s) Copy completed."

#: appEditors/AppGeoEditor.py:2876 appEditors/AppGerberEditor.py:897
msgid "Click on 1st point ..."
msgstr "Click on 1st point ..."

#: appEditors/AppGeoEditor.py:2900
msgid ""
"Font not supported. Only Regular, Bold, Italic and BoldItalic are supported. "
"Error"
msgstr ""
"Font not supported. Only Regular, Bold, Italic and BoldItalic are supported. "
"Error"

#: appEditors/AppGeoEditor.py:2908
msgid "No text to add."
msgstr "No text to add."

#: appEditors/AppGeoEditor.py:2918
msgid " Done. Adding Text completed."
msgstr " Done. Adding Text completed."

#: appEditors/AppGeoEditor.py:2955
msgid "Create buffer geometry ..."
msgstr "Create buffer geometry ..."

#: appEditors/AppGeoEditor.py:2990 appEditors/AppGerberEditor.py:5170
msgid "Done. Buffer Tool completed."
msgstr "Done. Buffer Tool completed."

#: appEditors/AppGeoEditor.py:3018
msgid "Done. Buffer Int Tool completed."
msgstr "Done. Buffer Int Tool completed."

#: appEditors/AppGeoEditor.py:3046
msgid "Done. Buffer Ext Tool completed."
msgstr "Done. Buffer Ext Tool completed."

#: appEditors/AppGeoEditor.py:3095 appEditors/AppGerberEditor.py:2160
msgid "Select a shape to act as deletion area ..."
msgstr "Select a shape to act as deletion area ..."

#: appEditors/AppGeoEditor.py:3097 appEditors/AppGeoEditor.py:3123
#: appEditors/AppGeoEditor.py:3129 appEditors/AppGerberEditor.py:2162
msgid "Click to pick-up the erase shape..."
msgstr "Click to pick-up the erase shape..."

#: appEditors/AppGeoEditor.py:3133 appEditors/AppGerberEditor.py:2221
msgid "Click to erase ..."
msgstr "Click to erase ..."

#: appEditors/AppGeoEditor.py:3162 appEditors/AppGerberEditor.py:2254
msgid "Done. Eraser tool action completed."
msgstr "Done. Eraser tool action completed."

#: appEditors/AppGeoEditor.py:3212
msgid "Create Paint geometry ..."
msgstr "Create Paint geometry ..."

#: appEditors/AppGeoEditor.py:3225 appEditors/AppGerberEditor.py:2417
msgid "Shape transformations ..."
msgstr "Shape transformations ..."

#: appEditors/AppGeoEditor.py:3281 appGUI/ObjectUI.py:803
#: appGUI/preferences/geometry/GeometryEditorPrefGroupUI.py:27
msgid "Geometry Editor"
msgstr "Geometry Editor"

#: appEditors/AppGeoEditor.py:3287 appEditors/AppGerberEditor.py:2495
#: appEditors/AppGerberEditor.py:3968 appEditors/appGCodeEditor.py:692
#: appGUI/ObjectUI.py:295 appGUI/ObjectUI.py:875 appGUI/ObjectUI.py:1846
#: appTools/ToolCutOut.py:2011 appTools/ToolDblSided.py:519
#: appTools/ToolTransform.py:579
msgid "Type"
msgstr "Type"

#: appEditors/AppGeoEditor.py:3557
msgid "Ring"
msgstr "Ring"

#: appEditors/AppGeoEditor.py:3559
msgid "Line"
msgstr "Line"

#: appEditors/AppGeoEditor.py:3561 appGUI/MainGUI.py:1496
#: appGUI/ObjectUI.py:1491
#: appGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:226
#: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:299
#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:328
#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:292
#: appTools/ToolDrilling.py:2589 appTools/ToolIsolation.py:3383
#: appTools/ToolMilling.py:2265 appTools/ToolNCC.py:4241
#: appTools/ToolPaint.py:3168
msgid "Polygon"
msgstr "Polygon"

#: appEditors/AppGeoEditor.py:3563
msgid "Multi-Line"
msgstr "Multi-Line"

#: appEditors/AppGeoEditor.py:3565
msgid "Multi-Polygon"
msgstr "Multi-Polygon"

#: appEditors/AppGeoEditor.py:3572
msgid "Geo Elem"
msgstr "Geo Elem"

#: appEditors/AppGeoEditor.py:4028
msgid "Grid Snap enabled."
msgstr "Grid Snap enabled."

#: appEditors/AppGeoEditor.py:4032
msgid "Grid Snap disabled."
msgstr "Grid Snap disabled."

#: appEditors/AppGeoEditor.py:4397 appGUI/MainGUI.py:3194
#: appGUI/MainGUI.py:3240 appGUI/MainGUI.py:3258 appGUI/MainGUI.py:3402
#: appGUI/MainGUI.py:3441 appGUI/MainGUI.py:3453 appGUI/MainGUI.py:3470
msgid "Click on target point."
msgstr "Click on target point."

#: appEditors/AppGeoEditor.py:4679
msgid "Editing MultiGeo Geometry, tool"
msgstr "Editing MultiGeo Geometry, tool"

#: appEditors/AppGeoEditor.py:4681 appTools/ToolNCC.py:2232
msgid "with diameter"
msgstr "with diameter"

#: appEditors/AppGeoEditor.py:4784 appEditors/AppGeoEditor.py:4819
msgid "A selection of at least 2 geo items is required to do Intersection."
msgstr "A selection of at least 2 geo items is required to do Intersection."

#: appEditors/AppGeoEditor.py:4905 appEditors/AppGeoEditor.py:5009
msgid ""
"Negative buffer value is not accepted. Use Buffer interior to generate an "
"'inside' shape"
msgstr ""
"Negative buffer value is not accepted. Use Buffer interior to generate an "
"'inside' shape"

#: appEditors/AppGeoEditor.py:4915 appEditors/AppGeoEditor.py:4968
#: appEditors/AppGeoEditor.py:5018
msgid "Nothing selected for buffering."
msgstr "Nothing selected for buffering."

#: appEditors/AppGeoEditor.py:4920 appEditors/AppGeoEditor.py:4972
#: appEditors/AppGeoEditor.py:5023
msgid "Invalid distance for buffering."
msgstr "Invalid distance for buffering."

#: appEditors/AppGeoEditor.py:4944 appEditors/AppGeoEditor.py:5043
msgid "Failed, the result is empty. Choose a different buffer value."
msgstr "Failed, the result is empty. Choose a different buffer value."

#: appEditors/AppGeoEditor.py:4955
msgid "Full buffer geometry created."
msgstr "Full buffer geometry created."

#: appEditors/AppGeoEditor.py:4961
msgid "Negative buffer value is not accepted."
msgstr "Negative buffer value is not accepted."

#: appEditors/AppGeoEditor.py:4992
msgid "Failed, the result is empty. Choose a smaller buffer value."
msgstr "Failed, the result is empty. Choose a smaller buffer value."

#: appEditors/AppGeoEditor.py:5002
msgid "Interior buffer geometry created."
msgstr "Interior buffer geometry created."

#: appEditors/AppGeoEditor.py:5053
msgid "Exterior buffer geometry created."
msgstr "Exterior buffer geometry created."

#: appEditors/AppGeoEditor.py:5059
#, python-format
msgid "Could not do Paint. Overlap value has to be less than 100%%."
msgstr "Could not do Paint. Overlap value has to be less than 100%%."

#: appEditors/AppGeoEditor.py:5066
msgid "Nothing selected for painting."
msgstr "Nothing selected for painting."

#: appEditors/AppGeoEditor.py:5072
msgid "Invalid value for"
msgstr "Invalid value for"

#: appEditors/AppGeoEditor.py:5131
msgid ""
"Could not do Paint. Try a different combination of parameters. Or a "
"different method of Paint"
msgstr ""
"Could not do Paint. Try a different combination of parameters. Or a "
"different method of Paint"

#: appEditors/AppGeoEditor.py:5142
msgid "Paint done."
msgstr "Paint done."

#: appEditors/AppGerberEditor.py:211
msgid "To add an Pad first select a aperture in Aperture Table"
msgstr "To add an Pad first select a aperture in Aperture Table"

#: appEditors/AppGerberEditor.py:218 appEditors/AppGerberEditor.py:418
msgid "Aperture size is zero. It needs to be greater than zero."
msgstr "Aperture size is zero. It needs to be greater than zero."

#: appEditors/AppGerberEditor.py:371 appEditors/AppGerberEditor.py:684
msgid ""
"Incompatible aperture type. Select an aperture with type 'C', 'R' or 'O'."
msgstr ""
"Incompatible aperture type. Select an aperture with type 'C', 'R' or 'O'."

#: appEditors/AppGerberEditor.py:383
msgid "Done. Adding Pad completed."
msgstr "Done. Adding Pad completed."

#: appEditors/AppGerberEditor.py:410
msgid "To add an Pad Array first select a aperture in Aperture Table"
msgstr "To add an Pad Array first select a aperture in Aperture Table"

#: appEditors/AppGerberEditor.py:490
msgid "Click on the Pad Circular Array Start position"
msgstr "Click on the Pad Circular Array Start position"

#: appEditors/AppGerberEditor.py:710
msgid "Too many Pads for the selected spacing angle."
msgstr "Too many Pads for the selected spacing angle."

#: appEditors/AppGerberEditor.py:733
msgid "Done. Pad Array added."
msgstr "Done. Pad Array added."

#: appEditors/AppGerberEditor.py:758
msgid "Select shape(s) and then click ..."
msgstr "Select shape(s) and then click ..."

#: appEditors/AppGerberEditor.py:770
msgid "Failed. Nothing selected."
msgstr "Failed. Nothing selected."

#: appEditors/AppGerberEditor.py:786
msgid ""
"Failed. Poligonize works only on geometries belonging to the same aperture."
msgstr ""
"Failed. Poligonize works only on geometries belonging to the same aperture."

#: appEditors/AppGerberEditor.py:840
msgid "Done. Poligonize completed."
msgstr "Done. Poligonize completed."

#: appEditors/AppGerberEditor.py:895 appEditors/AppGerberEditor.py:1119
#: appEditors/AppGerberEditor.py:1143
msgid "Corner Mode 1: 45 degrees ..."
msgstr "Corner Mode 1: 45 degrees ..."

#: appEditors/AppGerberEditor.py:907 appEditors/AppGerberEditor.py:1219
msgid "Click on next Point or click Right mouse button to complete ..."
msgstr "Click on next Point or click Right mouse button to complete ..."

#: appEditors/AppGerberEditor.py:1107 appEditors/AppGerberEditor.py:1140
msgid "Corner Mode 2: Reverse 45 degrees ..."
msgstr "Corner Mode 2: Reverse 45 degrees ..."

#: appEditors/AppGerberEditor.py:1110 appEditors/AppGerberEditor.py:1137
msgid "Corner Mode 3: 90 degrees ..."
msgstr "Corner Mode 3: 90 degrees ..."

#: appEditors/AppGerberEditor.py:1113 appEditors/AppGerberEditor.py:1134
msgid "Corner Mode 4: Reverse 90 degrees ..."
msgstr "Corner Mode 4: Reverse 90 degrees ..."

#: appEditors/AppGerberEditor.py:1116 appEditors/AppGerberEditor.py:1131
msgid "Corner Mode 5: Free angle ..."
msgstr "Corner Mode 5: Free angle ..."

#: appEditors/AppGerberEditor.py:1193 appEditors/AppGerberEditor.py:1358
#: appEditors/AppGerberEditor.py:1397
msgid "Track Mode 1: 45 degrees ..."
msgstr "Track Mode 1: 45 degrees ..."

#: appEditors/AppGerberEditor.py:1338 appEditors/AppGerberEditor.py:1392
msgid "Track Mode 2: Reverse 45 degrees ..."
msgstr "Track Mode 2: Reverse 45 degrees ..."

#: appEditors/AppGerberEditor.py:1343 appEditors/AppGerberEditor.py:1387
msgid "Track Mode 3: 90 degrees ..."
msgstr "Track Mode 3: 90 degrees ..."

#: appEditors/AppGerberEditor.py:1348 appEditors/AppGerberEditor.py:1382
msgid "Track Mode 4: Reverse 90 degrees ..."
msgstr "Track Mode 4: Reverse 90 degrees ..."

#: appEditors/AppGerberEditor.py:1353 appEditors/AppGerberEditor.py:1377
msgid "Track Mode 5: Free angle ..."
msgstr "Track Mode 5: Free angle ..."

#: appEditors/AppGerberEditor.py:1787
msgid "Scale the selected Gerber apertures ..."
msgstr "Scale the selected Gerber apertures ..."

#: appEditors/AppGerberEditor.py:1829
msgid "Buffer the selected apertures ..."
msgstr "Buffer the selected apertures ..."

#: appEditors/AppGerberEditor.py:1871
msgid "Mark polygon areas in the edited Gerber ..."
msgstr "Mark polygon areas in the edited Gerber ..."

#: appEditors/AppGerberEditor.py:1937
msgid "Nothing selected to move"
msgstr "Nothing selected to move"

#: appEditors/AppGerberEditor.py:2062
msgid "Done. Apertures Move completed."
msgstr "Done. Apertures Move completed."

#: appEditors/AppGerberEditor.py:2144
msgid "Done. Apertures copied."
msgstr "Done. Apertures copied."

#: appEditors/AppGerberEditor.py:2462 appGUI/MainGUI.py:1527
#: appGUI/ObjectUI.py:241
#: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:27
msgid "Gerber Editor"
msgstr "Gerber Editor"

#: appEditors/AppGerberEditor.py:2482 appGUI/ObjectUI.py:260
#: appTools/ToolProperties.py:162
msgid "Apertures"
msgstr "Apertures"

#: appEditors/AppGerberEditor.py:2484 appGUI/ObjectUI.py:262
msgid "Apertures Table for the Gerber Object."
msgstr "Apertures Table for the Gerber Object."

#: appEditors/AppGerberEditor.py:2495 appEditors/AppGerberEditor.py:3968
#: appGUI/ObjectUI.py:295
msgid "Code"
msgstr "Code"

#: appEditors/AppGerberEditor.py:2495 appEditors/AppGerberEditor.py:3968
#: appGUI/ObjectUI.py:295
#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:103
#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:167
#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:196
#: appGUI/preferences/tools/Tools2FiducialsPrefGroupUI.py:43
#: appTools/ToolCopperThieving.py:1354 appTools/ToolCopperThieving.py:1394
#: appTools/ToolFiducials.py:770
msgid "Size"
msgstr "Size"

#: appEditors/AppGerberEditor.py:2495 appEditors/AppGerberEditor.py:3968
#: appGUI/ObjectUI.py:295
msgid "Dim"
msgstr "Dim"

#: appEditors/AppGerberEditor.py:2500 appGUI/ObjectUI.py:299
msgid "Index"
msgstr "Index"

#: appEditors/AppGerberEditor.py:2502 appEditors/AppGerberEditor.py:2531
#: appGUI/ObjectUI.py:301
msgid "Aperture Code"
msgstr "Aperture Code"

#: appEditors/AppGerberEditor.py:2504 appGUI/ObjectUI.py:303
msgid "Type of aperture: circular, rectangle, macros etc"
msgstr "Type of aperture: circular, rectangle, macros etc"

#: appEditors/AppGerberEditor.py:2506 appGUI/ObjectUI.py:305
msgid "Aperture Size:"
msgstr "Aperture Size:"

#: appEditors/AppGerberEditor.py:2508 appGUI/ObjectUI.py:307
msgid ""
"Aperture Dimensions:\n"
" - (width, height) for R, O type.\n"
" - (dia, nVertices) for P type"
msgstr ""
"Aperture Dimensions:\n"
" - (width, height) for R, O type.\n"
" - (dia, nVertices) for P type"

#: appEditors/AppGerberEditor.py:2532
#: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:58
msgid "Code for the new aperture"
msgstr "Code for the new aperture"

#: appEditors/AppGerberEditor.py:2541
msgid "Aperture Size"
msgstr "Aperture Size"

#: appEditors/AppGerberEditor.py:2543
msgid ""
"Size for the new aperture.\n"
"If aperture type is 'R' or 'O' then\n"
"this value is automatically\n"
"calculated as:\n"
"sqrt(width**2 + height**2)"
msgstr ""
"Size for the new aperture.\n"
"If aperture type is 'R' or 'O' then\n"
"this value is automatically\n"
"calculated as:\n"
"sqrt(width**2 + height**2)"

#: appEditors/AppGerberEditor.py:2557
msgid "Aperture Type"
msgstr "Aperture Type"

#: appEditors/AppGerberEditor.py:2559
msgid ""
"Select the type of new aperture. Can be:\n"
"C = circular\n"
"R = rectangular\n"
"O = oblong"
msgstr ""
"Select the type of new aperture. Can be:\n"
"C = circular\n"
"R = rectangular\n"
"O = oblong"

#: appEditors/AppGerberEditor.py:2570
msgid "Aperture Dim"
msgstr "Aperture Dim"

#: appEditors/AppGerberEditor.py:2572
msgid ""
"Dimensions for the new aperture.\n"
"Active only for rectangular apertures (type R).\n"
"The format is (width, height)"
msgstr ""
"Dimensions for the new aperture.\n"
"Active only for rectangular apertures (type R).\n"
"The format is (width, height)"

#: appEditors/AppGerberEditor.py:2581
msgid "Add/Delete Aperture"
msgstr "Add/Delete Aperture"

#: appEditors/AppGerberEditor.py:2583
msgid "Add/Delete an aperture in the aperture table"
msgstr "Add/Delete an aperture in the aperture table"

#: appEditors/AppGerberEditor.py:2592
msgid "Add a new aperture to the aperture list."
msgstr "Add a new aperture to the aperture list."

#: appEditors/AppGerberEditor.py:2595 appEditors/AppGerberEditor.py:2743
#: appGUI/MainGUI.py:757 appGUI/MainGUI.py:1093 appGUI/MainGUI.py:1577
#: appGUI/MainGUI.py:2247 appGUI/MainGUI.py:4683 appGUI/ObjectUI.py:1008
#: appObjects/FlatCAMGeometry.py:555 appTools/ToolIsolation.py:70
#: appTools/ToolIsolation.py:3112 appTools/ToolNCC.py:69
#: appTools/ToolNCC.py:3916 appTools/ToolPaint.py:143
#: appTools/ToolPaint.py:2925 appTools/ToolSolderPaste.py:163
#: appTools/ToolSolderPaste.py:1209 app_Main.py:6123
msgid "Delete"
msgstr "Delete"

#: appEditors/AppGerberEditor.py:2597
msgid "Delete a aperture in the aperture list"
msgstr "Delete a aperture in the aperture list"

#: appEditors/AppGerberEditor.py:2614
msgid "Buffer Aperture"
msgstr "Buffer Aperture"

#: appEditors/AppGerberEditor.py:2616
msgid "Buffer a aperture in the aperture list"
msgstr "Buffer a aperture in the aperture list"

#: appEditors/AppGerberEditor.py:2629
#: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:195
msgid "Buffer distance"
msgstr "Buffer distance"

#: appEditors/AppGerberEditor.py:2630
msgid "Buffer corner"
msgstr "Buffer corner"

#: appEditors/AppGerberEditor.py:2632
msgid ""
"There are 3 types of corners:\n"
" - 'Round': the corner is rounded.\n"
" - 'Square': the corner is met in a sharp angle.\n"
" - 'Beveled': the corner is a line that directly connects the features "
"meeting in the corner"
msgstr ""
"There are 3 types of corners:\n"
" - 'Round': the corner is rounded.\n"
" - 'Square': the corner is met in a sharp angle.\n"
" - 'Beveled': the corner is a line that directly connects the features "
"meeting in the corner"

#: appEditors/AppGerberEditor.py:2662
msgid "Scale Aperture"
msgstr "Scale Aperture"

#: appEditors/AppGerberEditor.py:2664
msgid "Scale a aperture in the aperture list"
msgstr "Scale a aperture in the aperture list"

#: appEditors/AppGerberEditor.py:2672
#: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:210
msgid "Scale factor"
msgstr "Scale factor"

#: appEditors/AppGerberEditor.py:2674
msgid ""
"The factor by which to scale the selected aperture.\n"
"Values can be between 0.0000 and 999.9999"
msgstr ""
"The factor by which to scale the selected aperture.\n"
"Values can be between 0.0000 and 999.9999"

#: appEditors/AppGerberEditor.py:2702
msgid "Mark polygons"
msgstr "Mark polygons"

#: appEditors/AppGerberEditor.py:2704
msgid "Mark the polygon areas."
msgstr "Mark the polygon areas."

#: appEditors/AppGerberEditor.py:2712
msgid "Area UPPER threshold"
msgstr "Area UPPER threshold"

#: appEditors/AppGerberEditor.py:2714
msgid ""
"The threshold value, all areas less than this are marked.\n"
"Can have a value between 0.0000 and 9999.9999"
msgstr ""
"The threshold value, all areas less than this are marked.\n"
"Can have a value between 0.0000 and 9999.9999"

#: appEditors/AppGerberEditor.py:2721
msgid "Area LOWER threshold"
msgstr "Area LOWER threshold"

#: appEditors/AppGerberEditor.py:2723
msgid ""
"The threshold value, all areas more than this are marked.\n"
"Can have a value between 0.0000 and 9999.9999"
msgstr ""
"The threshold value, all areas more than this are marked.\n"
"Can have a value between 0.0000 and 9999.9999"

#: appEditors/AppGerberEditor.py:2737
msgid "Mark"
msgstr "Mark"

#: appEditors/AppGerberEditor.py:2739
msgid "Mark the polygons that fit within limits."
msgstr "Mark the polygons that fit within limits."

#: appEditors/AppGerberEditor.py:2745
msgid "Delete all the marked polygons."
msgstr "Delete all the marked polygons."

#: appEditors/AppGerberEditor.py:2751
msgid "Clear all the markings."
msgstr "Clear all the markings."

#: appEditors/AppGerberEditor.py:2771 appGUI/MainGUI.py:1065
#: appGUI/MainGUI.py:2220 appGUI/MainGUI.py:4680
msgid "Add Pad Array"
msgstr "Add Pad Array"

#: appEditors/AppGerberEditor.py:2773
msgid "Add an array of pads (linear or circular array)"
msgstr "Add an array of pads (linear or circular array)"

#: appEditors/AppGerberEditor.py:2779
msgid ""
"Select the type of pads array to create.\n"
"It can be Linear X(Y) or Circular"
msgstr ""
"Select the type of pads array to create.\n"
"It can be Linear X(Y) or Circular"

#: appEditors/AppGerberEditor.py:2790
#: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:95
msgid "Nr of pads"
msgstr "Nr of pads"

#: appEditors/AppGerberEditor.py:2792
#: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:97
msgid "Specify how many pads to be in the array."
msgstr "Specify how many pads to be in the array."

#: appEditors/AppGerberEditor.py:2841
msgid ""
"Angle at which the linear array is placed.\n"
"The precision is of max 2 decimals.\n"
"Min value is: -359.99 degrees.\n"
"Max value is:  360.00 degrees."
msgstr ""
"Angle at which the linear array is placed.\n"
"The precision is of max 2 decimals.\n"
"Min value is: -359.99 degrees.\n"
"Max value is:  360.00 degrees."

#: appEditors/AppGerberEditor.py:3352 appEditors/AppGerberEditor.py:3356
msgid "Aperture code value is missing or wrong format. Add it and retry."
msgstr "Aperture code value is missing or wrong format. Add it and retry."

#: appEditors/AppGerberEditor.py:3392
msgid ""
"Aperture dimensions value is missing or wrong format. Add it in format "
"(width, height) and retry."
msgstr ""
"Aperture dimensions value is missing or wrong format. Add it in format "
"(width, height) and retry."

#: appEditors/AppGerberEditor.py:3405
msgid "Aperture size value is missing or wrong format. Add it and retry."
msgstr "Aperture size value is missing or wrong format. Add it and retry."

#: appEditors/AppGerberEditor.py:3416
msgid "Aperture already in the aperture table."
msgstr "Aperture already in the aperture table."

#: appEditors/AppGerberEditor.py:3423
msgid "Added new aperture with code"
msgstr "Added new aperture with code"

#: appEditors/AppGerberEditor.py:3455
msgid " Select an aperture in Aperture Table"
msgstr " Select an aperture in Aperture Table"

#: appEditors/AppGerberEditor.py:3463
msgid "Select an aperture in Aperture Table -->"
msgstr "Select an aperture in Aperture Table -->"

#: appEditors/AppGerberEditor.py:3477
msgid "Deleted aperture with code"
msgstr "Deleted aperture with code"

#: appEditors/AppGerberEditor.py:3545
msgid "Dimensions need two float values separated by comma."
msgstr "Dimensions need two float values separated by comma."

#: appEditors/AppGerberEditor.py:3554
msgid "Dimensions edited."
msgstr "Dimensions edited."

#: appEditors/AppGerberEditor.py:4083
msgid "Loading Gerber into Editor"
msgstr "Loading Gerber into Editor"

#: appEditors/AppGerberEditor.py:4211
msgid "Setting up the UI"
msgstr "Setting up the UI"

#: appEditors/AppGerberEditor.py:4212
msgid "Adding geometry finished. Preparing the GUI"
msgstr "Adding geometry finished. Preparing the GUI"

#: appEditors/AppGerberEditor.py:4221
msgid "Finished loading the Gerber object into the editor."
msgstr "Finished loading the Gerber object into the editor."

#: appEditors/AppGerberEditor.py:4362
msgid ""
"There are no Aperture definitions in the file. Aborting Gerber creation."
msgstr ""
"There are no Aperture definitions in the file. Aborting Gerber creation."

#: appEditors/AppGerberEditor.py:4364 appObjects/AppObject.py:156
#: appObjects/FlatCAMGeometry.py:1850 appParsers/ParseExcellon.py:972
#: appTools/ToolPcbWizard.py:318 app_Main.py:9004 app_Main.py:9064
#: app_Main.py:9195 app_Main.py:9260 app_Main.py:9867
msgid "An internal error has occurred. See shell.\n"
msgstr "An internal error has occurred. See shell.\n"

#: appEditors/AppGerberEditor.py:4372
msgid "Creating Gerber."
msgstr "Creating Gerber."

#: appEditors/AppGerberEditor.py:4384
msgid "Done. Gerber editing finished."
msgstr "Done. Gerber editing finished."

#: appEditors/AppGerberEditor.py:4400
msgid "Cancelled. No aperture is selected"
msgstr "Cancelled. No aperture is selected"

#: appEditors/AppGerberEditor.py:4555 app_Main.py:6456
msgid "Coordinates copied to clipboard."
msgstr "Coordinates copied to clipboard."

#: appEditors/AppGerberEditor.py:5002
msgid "Failed. No aperture geometry is selected."
msgstr "Failed. No aperture geometry is selected."

#: appEditors/AppGerberEditor.py:5011 appEditors/AppGerberEditor.py:5282
msgid "Done. Apertures geometry deleted."
msgstr "Done. Apertures geometry deleted."

#: appEditors/AppGerberEditor.py:5154
msgid "No aperture to buffer. Select at least one aperture and try again."
msgstr "No aperture to buffer. Select at least one aperture and try again."

#: appEditors/AppGerberEditor.py:5166 appTools/ToolCutOut.py:770
#: appTools/ToolCutOut.py:893 appTools/ToolCutOut.py:1116
#: appTools/ToolCutOut.py:1262 camlib.py:4848 camlib.py:5607
msgid "Failed."
msgstr "Failed."

#: appEditors/AppGerberEditor.py:5185
msgid "Scale factor value is missing or wrong format. Add it and retry."
msgstr "Scale factor value is missing or wrong format. Add it and retry."

#: appEditors/AppGerberEditor.py:5217
msgid "No aperture to scale. Select at least one aperture and try again."
msgstr "No aperture to scale. Select at least one aperture and try again."

#: appEditors/AppGerberEditor.py:5233
msgid "Done. Scale Tool completed."
msgstr "Done. Scale Tool completed."

#: appEditors/AppGerberEditor.py:5271
msgid "Polygons marked."
msgstr "Polygons marked."

#: appEditors/AppGerberEditor.py:5274
msgid "No polygons were marked. None fit within the limits."
msgstr "No polygons were marked. None fit within the limits."

#: appEditors/AppGerberEditor.py:6002
msgid "Rotation action was not executed."
msgstr "Rotation action was not executed."

#: appEditors/AppGerberEditor.py:6044 app_Main.py:5879 app_Main.py:5927
msgid "Flip action was not executed."
msgstr "Flip action was not executed."

#: appEditors/AppGerberEditor.py:6084
msgid "Skew action was not executed."
msgstr "Skew action was not executed."

#: appEditors/AppGerberEditor.py:6123
msgid "Scale action was not executed."
msgstr "Scale action was not executed."

#: appEditors/AppGerberEditor.py:6167
msgid "Offset action was not executed."
msgstr "Offset action was not executed."

#: appEditors/AppGerberEditor.py:6253
msgid "Geometry shape offset Y cancelled"
msgstr "Geometry shape offset Y cancelled"

#: appEditors/AppGerberEditor.py:6268
msgid "Geometry shape skew X cancelled"
msgstr "Geometry shape skew X cancelled"

#: appEditors/AppGerberEditor.py:6283
msgid "Geometry shape skew Y cancelled"
msgstr "Geometry shape skew Y cancelled"

#: appEditors/AppTextEditor.py:75
msgid "Print Preview"
msgstr "Print Preview"

#: appEditors/AppTextEditor.py:77
msgid "Open a OS standard Preview Print window."
msgstr "Open a OS standard Preview Print window."

#: appEditors/AppTextEditor.py:80
msgid "Print Code"
msgstr "Print Code"

#: appEditors/AppTextEditor.py:82
msgid "Open a OS standard Print window."
msgstr "Open a OS standard Print window."

#: appEditors/AppTextEditor.py:85
msgid "Find in Code"
msgstr "Find in Code"

#: appEditors/AppTextEditor.py:87
msgid "Will search and highlight in yellow the string in the Find box."
msgstr "Will search and highlight in yellow the string in the Find box."

#: appEditors/AppTextEditor.py:91
msgid "Find box. Enter here the strings to be searched in the text."
msgstr "Find box. Enter here the strings to be searched in the text."

#: appEditors/AppTextEditor.py:93
msgid "Replace With"
msgstr "Replace With"

#: appEditors/AppTextEditor.py:95
msgid ""
"Will replace the string from the Find box with the one in the Replace box."
msgstr ""
"Will replace the string from the Find box with the one in the Replace box."

#: appEditors/AppTextEditor.py:99
msgid "String to replace the one in the Find box throughout the text."
msgstr "String to replace the one in the Find box throughout the text."

#: appEditors/AppTextEditor.py:101 appGUI/GUIElements.py:3508
#: appGUI/ObjectUI.py:1727 appGUI/preferences/cncjob/CNCJobOptPrefGroupUI.py:61
#: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:285
#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:280
#: appTools/ToolIsolation.py:802 appTools/ToolIsolation.py:1395
#: appTools/ToolIsolation.py:3330 appTools/ToolPaint.py:1034
#: appTools/ToolPaint.py:3126 defaults.py:414 defaults.py:501
#: tclCommands/TclCommandPaint.py:162
msgid "All"
msgstr "All"

#: appEditors/AppTextEditor.py:102
msgid ""
"When checked it will replace all instances in the 'Find' box\n"
"with the text in the 'Replace' box.."
msgstr ""
"When checked it will replace all instances in the 'Find' box\n"
"with the text in the 'Replace' box.."

#: appEditors/AppTextEditor.py:105
msgid "Copy All"
msgstr "Copy All"

#: appEditors/AppTextEditor.py:107
msgid "Will copy all the text in the Code Editor to the clipboard."
msgstr "Will copy all the text in the Code Editor to the clipboard."

#: appEditors/AppTextEditor.py:112
#, fuzzy
#| msgid "Save changes"
msgid "Save changes internally."
msgstr "Save changes"

#: appEditors/AppTextEditor.py:115
msgid "Open Code"
msgstr "Open Code"

#: appEditors/AppTextEditor.py:117
msgid "Will open a text file in the editor."
msgstr "Will open a text file in the editor."

#: appEditors/AppTextEditor.py:120
msgid "Save Code"
msgstr "Save Code"

#: appEditors/AppTextEditor.py:122
msgid "Will save the text in the editor into a file."
msgstr "Will save the text in the editor into a file."

#: appEditors/AppTextEditor.py:125
msgid "Run Code"
msgstr "Run Code"

#: appEditors/AppTextEditor.py:126
msgid "Will run the TCL commands found in the text file, one by one."
msgstr "Will run the TCL commands found in the text file, one by one."

#: appEditors/AppTextEditor.py:224 appEditors/appGCodeEditor.py:602
msgid "Open file"
msgstr "Open file"

#: appEditors/AppTextEditor.py:255 appEditors/AppTextEditor.py:260
#: appObjects/FlatCAMCNCJob.py:1612 appObjects/FlatCAMCNCJob.py:1617
#: appObjects/FlatCAMCNCJob.py:1802 appObjects/FlatCAMCNCJob.py:1807
#: appObjects/FlatCAMCNCJob.py:1880 appObjects/FlatCAMCNCJob.py:1885
#: appTools/ToolSolderPaste.py:1063 app_Main.py:7038 app_Main.py:7043
msgid "Export Code ..."
msgstr "Export Code ..."

#: appEditors/AppTextEditor.py:314 appObjects/FlatCAMCNCJob.py:1634
#: appObjects/FlatCAMCNCJob.py:1824 appObjects/FlatCAMCNCJob.py:2273
#: appTools/ToolSolderPaste.py:1093
msgid "No such file or directory"
msgstr "No such file or directory"

#: appEditors/AppTextEditor.py:326 appObjects/FlatCAMCNCJob.py:2287
msgid "Saved to"
msgstr "Saved to"

#: appEditors/AppTextEditor.py:374
#, fuzzy
#| msgid "Code Editor content copied to clipboard ..."
msgid "Content copied to clipboard ..."
msgstr "Code Editor content copied to clipboard ..."

#: appEditors/appGCodeEditor.py:66 app_Main.py:7899
msgid "Code Editor"
msgstr "Code Editor"

#: appEditors/appGCodeEditor.py:143 appEditors/appGCodeEditor.py:235
#, fuzzy
#| msgid "View GCode"
msgid "All GCode"
msgstr "View GCode"

#: appEditors/appGCodeEditor.py:149 appEditors/appGCodeEditor.py:241
#, fuzzy
#| msgid "Save GCode"
msgid "Header GCode"
msgstr "Save GCode"

#: appEditors/appGCodeEditor.py:155 appEditors/appGCodeEditor.py:247
#, fuzzy
#| msgid "Starting G-Code"
msgid "Start GCode"
msgstr "Starting G-Code"

#: appEditors/appGCodeEditor.py:577 appObjects/FlatCAMCNCJob.py:1978
#: appTools/ToolCalibration.py:447
msgid "Loaded Machine Code into Code Editor"
msgstr "Loaded Machine Code into Code Editor"

#: appEditors/appGCodeEditor.py:667 appGUI/ObjectUI.py:1747
#, fuzzy
#| msgid "Code Editor"
msgid "GCode Editor"
msgstr "Code Editor"

#: appEditors/appGCodeEditor.py:692 appEditors/appGCodeEditor.py:703
#: appGUI/ObjectUI.py:875 appGUI/ObjectUI.py:1846 appGUI/ObjectUI.py:1856
#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:138
#: appTools/ToolCopperThieving.py:1314
msgid "Dia"
msgstr "Dia"

#: appEditors/appGCodeEditor.py:692 appGUI/ObjectUI.py:875
#: appGUI/ObjectUI.py:1846 appTools/ToolIsolation.py:2984
#: appTools/ToolNCC.py:3777 appTools/ToolPaint.py:2812
msgid "TT"
msgstr "TT"

#: appEditors/appGCodeEditor.py:703 appGUI/ObjectUI.py:588
#: appGUI/ObjectUI.py:1856
#: appGUI/preferences/excellon/ExcellonOptPrefGroupUI.py:71
#: appTools/ToolDrilling.py:2065 appTools/ToolMilling.py:1670
#: appTools/ToolMilling.py:1769 appTools/ToolProperties.py:169
msgid "Drills"
msgstr "Drills"

#: appEditors/appGCodeEditor.py:703 appGUI/ObjectUI.py:588
#: appGUI/ObjectUI.py:1856
#: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:158
#: appGUI/preferences/excellon/ExcellonOptPrefGroupUI.py:72
#: appTools/ToolDrilling.py:2065 appTools/ToolMilling.py:1670
#: appTools/ToolMilling.py:1770 appTools/ToolProperties.py:171
msgid "Slots"
msgstr "Slots"

#: appEditors/appGCodeEditor.py:712 appEditors/appGCodeEditor.py:734
msgid "CNC Code Snippet"
msgstr ""

#: appEditors/appGCodeEditor.py:714 appEditors/appGCodeEditor.py:736
msgid "Code snippet defined in Preferences."
msgstr ""

#: appEditors/appGCodeEditor.py:720 appEditors/appGCodeEditor.py:742
#, fuzzy
#| msgid ""
#| "Type here any G-Code commands you would\n"
#| "like to add at the beginning of the G-Code file."
msgid ""
"Type here any G-Code commands you would\n"
"like to insert at the cursor location."
msgstr ""
"Type here any G-Code commands you would\n"
"like to add at the beginning of the G-Code file."

#: appEditors/appGCodeEditor.py:726 appEditors/appGCodeEditor.py:748
#, fuzzy
#| msgid "Insert QRCode"
msgid "Insert Code"
msgstr "Insert QRCode"

#: appEditors/appGCodeEditor.py:729 appEditors/appGCodeEditor.py:751
msgid "Insert the code above at the cursor location."
msgstr ""

#: appGUI/GUIElements.py:2959
msgid ""
"The reference can be:\n"
"- Absolute -> the reference point is point (0,0)\n"
"- Relative -> the reference point is the mouse position before Jump"
msgstr ""
"The reference can be:\n"
"- Absolute -> the reference point is point (0,0)\n"
"- Relative -> the reference point is the mouse position before Jump"

#: appGUI/GUIElements.py:2964
msgid "Abs"
msgstr "Abs"

#: appGUI/GUIElements.py:2965
msgid "Relative"
msgstr "Relative"

#: appGUI/GUIElements.py:2975
msgid "Location"
msgstr "Location"

#: appGUI/GUIElements.py:2977
msgid ""
"The Location value is a tuple (x,y).\n"
"If the reference is Absolute then the Jump will be at the position (x,y).\n"
"If the reference is Relative then the Jump will be at the (x,y) distance\n"
"from the current mouse location point."
msgstr ""
"The Location value is a tuple (x,y).\n"
"If the reference is Absolute then the Jump will be at the position (x,y).\n"
"If the reference is Relative then the Jump will be at the (x,y) distance\n"
"from the current mouse location point."

#: appGUI/GUIElements.py:3017
msgid "Save Log"
msgstr "Save Log"

#: appGUI/GUIElements.py:3027 app_Main.py:2803 app_Main.py:3175
#: app_Main.py:3348
msgid "Close"
msgstr "Close"

#: appGUI/GUIElements.py:3036 appTools/ToolShell.py:296
msgid "Type >help< to get started"
msgstr "Type >help< to get started"

#: appGUI/GUIElements.py:3403 appGUI/GUIElements.py:3420
#, fuzzy
#| msgid "Toggle the axis"
msgid "Jog the Y axis."
msgstr "Toggle the axis"

#: appGUI/GUIElements.py:3411
#, fuzzy
#| msgid "Move to Origin"
msgid "Move to Origin."
msgstr "Move to Origin"

#: appGUI/GUIElements.py:3428 appGUI/GUIElements.py:3436
#, fuzzy
#| msgid "Toggle the axis"
msgid "Jog the X axis."
msgstr "Toggle the axis"

#: appGUI/GUIElements.py:3446 appGUI/GUIElements.py:3456
#, fuzzy
#| msgid "Toggle the axis"
msgid "Jog the Z axis."
msgstr "Toggle the axis"

#: appGUI/GUIElements.py:3482
msgid "Zero the CNC X axes at current position."
msgstr ""

#: appGUI/GUIElements.py:3490
msgid "Zero the CNC Y axes at current position."
msgstr ""

#: appGUI/GUIElements.py:3495
#, fuzzy
#| msgid "LZ"
msgid "Z"
msgstr "LZ"

#: appGUI/GUIElements.py:3498
msgid "Zero the CNC Z axes at current position."
msgstr ""

#: appGUI/GUIElements.py:3502
msgid "Do Home"
msgstr ""

#: appGUI/GUIElements.py:3504
msgid "Perform a homing cycle on all axis."
msgstr ""

#: appGUI/GUIElements.py:3512
msgid "Zero all CNC axes at current position."
msgstr ""

#: appGUI/GUIElements.py:3667 appGUI/GUIElements.py:3676
msgid "Idle."
msgstr "Idle."

#: appGUI/GUIElements.py:3709
msgid "Application started ..."
msgstr "Application started ..."

#: appGUI/GUIElements.py:3710
msgid "Hello!"
msgstr "Hello!"

#: appGUI/GUIElements.py:3757 appGUI/MainGUI.py:190 appGUI/MainGUI.py:918
#: appGUI/MainGUI.py:2073
msgid "Run Script ..."
msgstr "Run Script ..."

#: appGUI/GUIElements.py:3759 appGUI/MainGUI.py:192
msgid ""
"Will run the opened Tcl Script thus\n"
"enabling the automation of certain\n"
"functions of FlatCAM."
msgstr ""
"Will run the opened Tcl Script thus\n"
"enabling the automation of certain\n"
"functions of FlatCAM."

#: appGUI/GUIElements.py:3768 appGUI/MainGUI.py:118
#: appTools/ToolPcbWizard.py:390 appTools/ToolPcbWizard.py:397
msgid "Open"
msgstr "Open"

#: appGUI/GUIElements.py:3772
msgid "Open Project ..."
msgstr "Open Project ..."

#: appGUI/GUIElements.py:3778 appGUI/MainGUI.py:129
msgid "Open &Gerber ...\tCtrl+G"
msgstr "Open &Gerber ...\tCtrl+G"

#: appGUI/GUIElements.py:3783 appGUI/MainGUI.py:134
msgid "Open &Excellon ...\tCtrl+E"
msgstr "Open &Excellon ...\tCtrl+E"

#: appGUI/GUIElements.py:3788 appGUI/MainGUI.py:139
msgid "Open G-&Code ..."
msgstr "Open G-&Code ..."

#: appGUI/GUIElements.py:3798
msgid "Exit"
msgstr "Exit"

#: appGUI/MainGUI.py:67 appGUI/MainGUI.py:69 appGUI/MainGUI.py:1457
msgid "Toggle Panel"
msgstr "Toggle Panel"

#: appGUI/MainGUI.py:79
msgid "File"
msgstr "File"

#: appGUI/MainGUI.py:84
msgid "&New Project ...\tCtrl+N"
msgstr "&New Project ...\tCtrl+N"

#: appGUI/MainGUI.py:86
msgid "Will create a new, blank project"
msgstr "Will create a new, blank project"

#: appGUI/MainGUI.py:91
msgid "&New"
msgstr "&New"

#: appGUI/MainGUI.py:95
msgid "Geometry\tN"
msgstr "Geometry\tN"

#: appGUI/MainGUI.py:97
msgid "Will create a new, empty Geometry Object."
msgstr "Will create a new, empty Geometry Object."

#: appGUI/MainGUI.py:100
msgid "Gerber\tB"
msgstr "Gerber\tB"

#: appGUI/MainGUI.py:102
msgid "Will create a new, empty Gerber Object."
msgstr "Will create a new, empty Gerber Object."

#: appGUI/MainGUI.py:105
msgid "Excellon\tL"
msgstr "Excellon\tL"

#: appGUI/MainGUI.py:107
msgid "Will create a new, empty Excellon Object."
msgstr "Will create a new, empty Excellon Object."

#: appGUI/MainGUI.py:112
msgid "Document\tD"
msgstr "Document\tD"

#: appGUI/MainGUI.py:114
msgid "Will create a new, empty Document Object."
msgstr "Will create a new, empty Document Object."

#: appGUI/MainGUI.py:123
msgid "Open &Project ..."
msgstr "Open &Project ..."

#: appGUI/MainGUI.py:146
msgid "Open Config ..."
msgstr "Open Config ..."

#: appGUI/MainGUI.py:151
msgid "Recent projects"
msgstr "Recent projects"

#: appGUI/MainGUI.py:153
msgid "Recent files"
msgstr "Recent files"

#: appGUI/MainGUI.py:156 appGUI/MainGUI.py:759 appGUI/MainGUI.py:1430
msgid "Save"
msgstr "Save"

#: appGUI/MainGUI.py:160
msgid "&Save Project ...\tCtrl+S"
msgstr "&Save Project ...\tCtrl+S"

#: appGUI/MainGUI.py:165
msgid "Save Project &As ...\tCtrl+Shift+S"
msgstr "Save Project &As ...\tCtrl+Shift+S"

#: appGUI/MainGUI.py:180
msgid "Scripting"
msgstr "Scripting"

#: appGUI/MainGUI.py:184 appGUI/MainGUI.py:914 appGUI/MainGUI.py:2069
msgid "New Script ..."
msgstr "New Script ..."

#: appGUI/MainGUI.py:186 appGUI/MainGUI.py:916 appGUI/MainGUI.py:2071
msgid "Open Script ..."
msgstr "Open Script ..."

#: appGUI/MainGUI.py:188
msgid "Open Example ..."
msgstr "Open Example ..."

#: appGUI/MainGUI.py:207
msgid "Import"
msgstr "Import"

#: appGUI/MainGUI.py:209
msgid "&SVG as Geometry Object ..."
msgstr "&SVG as Geometry Object ..."

#: appGUI/MainGUI.py:212
msgid "&SVG as Gerber Object ..."
msgstr "&SVG as Gerber Object ..."

#: appGUI/MainGUI.py:217
msgid "&DXF as Geometry Object ..."
msgstr "&DXF as Geometry Object ..."

#: appGUI/MainGUI.py:220
msgid "&DXF as Gerber Object ..."
msgstr "&DXF as Gerber Object ..."

#: appGUI/MainGUI.py:224
msgid "HPGL2 as Geometry Object ..."
msgstr "HPGL2 as Geometry Object ..."

#: appGUI/MainGUI.py:230
msgid "Export"
msgstr "Export"

#: appGUI/MainGUI.py:234
msgid "Export &SVG ..."
msgstr "Export &SVG ..."

#: appGUI/MainGUI.py:238
msgid "Export DXF ..."
msgstr "Export DXF ..."

#: appGUI/MainGUI.py:244
msgid "Export &PNG ..."
msgstr "Export &PNG ..."

#: appGUI/MainGUI.py:246
msgid ""
"Will export an image in PNG format,\n"
"the saved image will contain the visual \n"
"information currently in FlatCAM Plot Area."
msgstr ""
"Will export an image in PNG format,\n"
"the saved image will contain the visual \n"
"information currently in FlatCAM Plot Area."

#: appGUI/MainGUI.py:255
msgid "Export &Excellon ..."
msgstr "Export &Excellon ..."

#: appGUI/MainGUI.py:257
msgid ""
"Will export an Excellon Object as Excellon file,\n"
"the coordinates format, the file units and zeros\n"
"are set in Preferences -> Excellon Export."
msgstr ""
"Will export an Excellon Object as Excellon file,\n"
"the coordinates format, the file units and zeros\n"
"are set in Preferences -> Excellon Export."

#: appGUI/MainGUI.py:264
msgid "Export &Gerber ..."
msgstr "Export &Gerber ..."

#: appGUI/MainGUI.py:266
msgid ""
"Will export an Gerber Object as Gerber file,\n"
"the coordinates format, the file units and zeros\n"
"are set in Preferences -> Gerber Export."
msgstr ""
"Will export an Gerber Object as Gerber file,\n"
"the coordinates format, the file units and zeros\n"
"are set in Preferences -> Gerber Export."

#: appGUI/MainGUI.py:276
msgid "Backup"
msgstr "Backup"

#: appGUI/MainGUI.py:281
msgid "Import Preferences from file ..."
msgstr "Import Preferences from file ..."

#: appGUI/MainGUI.py:287
msgid "Export Preferences to file ..."
msgstr "Export Preferences to file ..."

#: appGUI/MainGUI.py:295 appGUI/preferences/PreferencesUIManager.py:1165
msgid "Save Preferences"
msgstr "Save Preferences"

#: appGUI/MainGUI.py:301 appGUI/MainGUI.py:4270
msgid "Print (PDF)"
msgstr "Print (PDF)"

#: appGUI/MainGUI.py:309
msgid "E&xit"
msgstr "E&xit"

#: appGUI/MainGUI.py:317 appGUI/MainGUI.py:753 appGUI/MainGUI.py:1579
msgid "Edit"
msgstr "Edit"

#: appGUI/MainGUI.py:321
msgid "Edit Object\tE"
msgstr "Edit Object\tE"

#: appGUI/MainGUI.py:323
msgid "Close Editor\tCtrl+S"
msgstr "Close Editor\tCtrl+S"

#: appGUI/MainGUI.py:333
msgid "Conversion"
msgstr "Conversion"

#: appGUI/MainGUI.py:336
msgid "Convert Single to MultiGeo"
msgstr "Convert Single to MultiGeo"

#: appGUI/MainGUI.py:338
msgid ""
"Will convert a Geometry object from single_geometry type\n"
"to a multi_geometry type."
msgstr ""
"Will convert a Geometry object from single_geometry type\n"
"to a multi_geometry type."

#: appGUI/MainGUI.py:342
msgid "Convert Multi to SingleGeo"
msgstr "Convert Multi to SingleGeo"

#: appGUI/MainGUI.py:344
msgid ""
"Will convert a Geometry object from multi_geometry type\n"
"to a single_geometry type."
msgstr ""
"Will convert a Geometry object from multi_geometry type\n"
"to a single_geometry type."

#: appGUI/MainGUI.py:351
msgid "Convert Any to Geo"
msgstr "Convert Any to Geo"

#: appGUI/MainGUI.py:354
msgid "Convert Any to Gerber"
msgstr "Convert Any to Gerber"

#: appGUI/MainGUI.py:357
#, fuzzy
#| msgid "Convert Any to Geo"
msgid "Convert Any to Excellon"
msgstr "Convert Any to Geo"

#: appGUI/MainGUI.py:362
#, fuzzy
#| msgid "Align Objects"
msgid "Join Objects"
msgstr "Align Objects"

#: appGUI/MainGUI.py:364
msgid "&Join Geo/Gerber/Exc -> Geo"
msgstr "&Join Geo/Gerber/Exc -> Geo"

#: appGUI/MainGUI.py:366
msgid ""
"Merge a selection of objects, which can be of type:\n"
"- Gerber\n"
"- Excellon\n"
"- Geometry\n"
"into a new combo Geometry object."
msgstr ""
"Merge a selection of objects, which can be of type:\n"
"- Gerber\n"
"- Excellon\n"
"- Geometry\n"
"into a new combo Geometry object."

#: appGUI/MainGUI.py:373
msgid "Join Excellon(s) -> Excellon"
msgstr "Join Excellon(s) -> Excellon"

#: appGUI/MainGUI.py:375
msgid "Merge a selection of Excellon objects into a new combo Excellon object."
msgstr ""
"Merge a selection of Excellon objects into a new combo Excellon object."

#: appGUI/MainGUI.py:378
msgid "Join Gerber(s) -> Gerber"
msgstr "Join Gerber(s) -> Gerber"

#: appGUI/MainGUI.py:380
msgid "Merge a selection of Gerber objects into a new combo Gerber object."
msgstr "Merge a selection of Gerber objects into a new combo Gerber object."

#: appGUI/MainGUI.py:388
msgid "&Copy\tCtrl+C"
msgstr "&Copy\tCtrl+C"

#: appGUI/MainGUI.py:393
msgid "&Delete\tDEL"
msgstr "&Delete\tDEL"

#: appGUI/MainGUI.py:398
msgid "Se&t Origin\tO"
msgstr "Se&t Origin\tO"

#: appGUI/MainGUI.py:400
msgid "Move to Origin\tShift+O"
msgstr "Move to Origin\tShift+O"

#: appGUI/MainGUI.py:403
msgid "Jump to Location\tJ"
msgstr "Jump to Location\tJ"

#: appGUI/MainGUI.py:405
msgid "Locate in Object\tShift+J"
msgstr "Locate in Object\tShift+J"

#: appGUI/MainGUI.py:410
msgid "Toggle Units\tQ"
msgstr "Toggle Units\tQ"

#: appGUI/MainGUI.py:412
msgid "&Select All\tCtrl+A"
msgstr "&Select All\tCtrl+A"

#: appGUI/MainGUI.py:417
msgid "&Preferences\tShift+P"
msgstr "&Preferences\tShift+P"

#: appGUI/MainGUI.py:423 appTools/ToolProperties.py:158
msgid "Options"
msgstr "Options"

#: appGUI/MainGUI.py:425
msgid "&Rotate Selection\tShift+(R)"
msgstr "&Rotate Selection\tShift+(R)"

#: appGUI/MainGUI.py:430
msgid "&Skew on X axis\tShift+X"
msgstr "&Skew on X axis\tShift+X"

#: appGUI/MainGUI.py:432
msgid "S&kew on Y axis\tShift+Y"
msgstr "S&kew on Y axis\tShift+Y"

#: appGUI/MainGUI.py:437
msgid "Flip on &X axis\tX"
msgstr "Flip on &X axis\tX"

#: appGUI/MainGUI.py:439
msgid "Flip on &Y axis\tY"
msgstr "Flip on &Y axis\tY"

#: appGUI/MainGUI.py:444
msgid "View source\tAlt+S"
msgstr "View source\tAlt+S"

#: appGUI/MainGUI.py:446
msgid "Tools DataBase\tCtrl+D"
msgstr "Tools DataBase\tCtrl+D"

#: appGUI/MainGUI.py:453 appGUI/MainGUI.py:1477
msgid "View"
msgstr "View"

#: appGUI/MainGUI.py:455
msgid "Enable all plots\tAlt+1"
msgstr "Enable all plots\tAlt+1"

#: appGUI/MainGUI.py:457
msgid "Disable all plots\tAlt+2"
msgstr "Disable all plots\tAlt+2"

#: appGUI/MainGUI.py:459
msgid "Disable non-selected\tAlt+3"
msgstr "Disable non-selected\tAlt+3"

#: appGUI/MainGUI.py:463
msgid "&Zoom Fit\tV"
msgstr "&Zoom Fit\tV"

#: appGUI/MainGUI.py:465
msgid "&Zoom In\t="
msgstr "&Zoom In\t="

#: appGUI/MainGUI.py:467
msgid "&Zoom Out\t-"
msgstr "&Zoom Out\t-"

#: appGUI/MainGUI.py:472
msgid "Redraw All\tF5"
msgstr "Redraw All\tF5"

#: appGUI/MainGUI.py:476
msgid "Toggle Code Editor\tShift+E"
msgstr "Toggle Code Editor\tShift+E"

#: appGUI/MainGUI.py:479
msgid "&Toggle FullScreen\tAlt+F10"
msgstr "&Toggle FullScreen\tAlt+F10"

#: appGUI/MainGUI.py:481
msgid "&Toggle Plot Area\tCtrl+F10"
msgstr "&Toggle Plot Area\tCtrl+F10"

#: appGUI/MainGUI.py:483
msgid "&Toggle Project/Sel/Tool\t`"
msgstr "&Toggle Project/Sel/Tool\t`"

#: appGUI/MainGUI.py:487
msgid "&Toggle Grid Snap\tG"
msgstr "&Toggle Grid Snap\tG"

#: appGUI/MainGUI.py:489
msgid "&Toggle Grid Lines\tAlt+G"
msgstr "&Toggle Grid Lines\tAlt+G"

#: appGUI/MainGUI.py:491
msgid "&Toggle Axis\tShift+G"
msgstr "&Toggle Axis\tShift+G"

#: appGUI/MainGUI.py:493
msgid "Toggle Workspace\tShift+W"
msgstr "Toggle Workspace\tShift+W"

#: appGUI/MainGUI.py:495
msgid "Toggle HUD\tAlt+H"
msgstr "Toggle HUD\tAlt+H"

#: appGUI/MainGUI.py:500
msgid "Objects"
msgstr "Objects"

#: appGUI/MainGUI.py:503 appGUI/MainGUI.py:4268
#: appObjects/ObjectCollection.py:1128 appObjects/ObjectCollection.py:1175
msgid "Select All"
msgstr "Select All"

#: appGUI/MainGUI.py:505 appObjects/ObjectCollection.py:1132
#: appObjects/ObjectCollection.py:1179
msgid "Deselect All"
msgstr "Deselect All"

#: appGUI/MainGUI.py:514
msgid "&Command Line\tS"
msgstr "&Command Line\tS"

#: appGUI/MainGUI.py:519
msgid "Help"
msgstr "Help"

#: appGUI/MainGUI.py:521
msgid "Online Help\tF1"
msgstr "Online Help\tF1"

#: appGUI/MainGUI.py:527 app_Main.py:3313 app_Main.py:3322
msgid "Bookmarks Manager"
msgstr "Bookmarks Manager"

#: appGUI/MainGUI.py:531
msgid "Report a bug"
msgstr "Report a bug"

#: appGUI/MainGUI.py:534
msgid "Excellon Specification"
msgstr "Excellon Specification"

#: appGUI/MainGUI.py:536
msgid "Gerber Specification"
msgstr "Gerber Specification"

#: appGUI/MainGUI.py:541
msgid "Shortcuts List\tF3"
msgstr "Shortcuts List\tF3"

#: appGUI/MainGUI.py:543
msgid "YouTube Channel\tF4"
msgstr "YouTube Channel\tF4"

#: appGUI/MainGUI.py:548
#, fuzzy
#| msgid "How To's"
msgid "How To"
msgstr "How To's"

#: appGUI/MainGUI.py:551 app_Main.py:2770
msgid "About FlatCAM"
msgstr "About FlatCAM"

#: appGUI/MainGUI.py:560
msgid "Add Circle\tO"
msgstr "Add Circle\tO"

#: appGUI/MainGUI.py:563
msgid "Add Arc\tA"
msgstr "Add Arc\tA"

#: appGUI/MainGUI.py:566
msgid "Add Rectangle\tR"
msgstr "Add Rectangle\tR"

#: appGUI/MainGUI.py:569
msgid "Add Polygon\tN"
msgstr "Add Polygon\tN"

#: appGUI/MainGUI.py:572
msgid "Add Path\tP"
msgstr "Add Path\tP"

#: appGUI/MainGUI.py:575
msgid "Add Text\tT"
msgstr "Add Text\tT"

#: appGUI/MainGUI.py:578
msgid "Polygon Union\tU"
msgstr "Polygon Union\tU"

#: appGUI/MainGUI.py:580
msgid "Polygon Intersection\tE"
msgstr "Polygon Intersection\tE"

#: appGUI/MainGUI.py:582
msgid "Polygon Subtraction\tS"
msgstr "Polygon Subtraction\tS"

#: appGUI/MainGUI.py:586
msgid "Cut Path\tX"
msgstr "Cut Path\tX"

#: appGUI/MainGUI.py:590
msgid "Copy Geom\tC"
msgstr "Copy Geom\tC"

#: appGUI/MainGUI.py:592
msgid "Delete Shape\tDEL"
msgstr "Delete Shape\tDEL"

#: appGUI/MainGUI.py:596 appGUI/MainGUI.py:683
msgid "Move\tM"
msgstr "Move\tM"

#: appGUI/MainGUI.py:598
msgid "Buffer Tool\tB"
msgstr "Buffer Tool\tB"

#: appGUI/MainGUI.py:601
msgid "Paint Tool\tI"
msgstr "Paint Tool\tI"

#: appGUI/MainGUI.py:604
msgid "Transform Tool\tAlt+R"
msgstr "Transform Tool\tAlt+R"

#: appGUI/MainGUI.py:608
msgid "Toggle Corner Snap\tK"
msgstr "Toggle Corner Snap\tK"

#: appGUI/MainGUI.py:614
msgid ">Excellon Editor<"
msgstr ">Excellon Editor<"

#: appGUI/MainGUI.py:618
msgid "Add Drill Array\tA"
msgstr "Add Drill Array\tA"

#: appGUI/MainGUI.py:620
msgid "Add Drill\tD"
msgstr "Add Drill\tD"

#: appGUI/MainGUI.py:624
msgid "Add Slot Array\tQ"
msgstr "Add Slot Array\tQ"

#: appGUI/MainGUI.py:626
msgid "Add Slot\tW"
msgstr "Add Slot\tW"

#: appGUI/MainGUI.py:630
msgid "Resize Drill(S)\tR"
msgstr "Resize Drill(S)\tR"

#: appGUI/MainGUI.py:633 appGUI/MainGUI.py:677
msgid "Copy\tC"
msgstr "Copy\tC"

#: appGUI/MainGUI.py:635 appGUI/MainGUI.py:679
msgid "Delete\tDEL"
msgstr "Delete\tDEL"

#: appGUI/MainGUI.py:640
msgid "Move Drill(s)\tM"
msgstr "Move Drill(s)\tM"

#: appGUI/MainGUI.py:645
msgid ">Gerber Editor<"
msgstr ">Gerber Editor<"

#: appGUI/MainGUI.py:649
msgid "Add Pad\tP"
msgstr "Add Pad\tP"

#: appGUI/MainGUI.py:651
msgid "Add Pad Array\tA"
msgstr "Add Pad Array\tA"

#: appGUI/MainGUI.py:653
msgid "Add Track\tT"
msgstr "Add Track\tT"

#: appGUI/MainGUI.py:655
msgid "Add Region\tN"
msgstr "Add Region\tN"

#: appGUI/MainGUI.py:659
msgid "Poligonize\tAlt+N"
msgstr "Poligonize\tAlt+N"

#: appGUI/MainGUI.py:661
msgid "Add SemiDisc\tE"
msgstr "Add SemiDisc\tE"

#: appGUI/MainGUI.py:663
msgid "Add Disc\tD"
msgstr "Add Disc\tD"

#: appGUI/MainGUI.py:665
msgid "Buffer\tB"
msgstr "Buffer\tB"

#: appGUI/MainGUI.py:667
msgid "Scale\tS"
msgstr "Scale\tS"

#: appGUI/MainGUI.py:669
msgid "Mark Area\tAlt+A"
msgstr "Mark Area\tAlt+A"

#: appGUI/MainGUI.py:671
msgid "Eraser\tCtrl+E"
msgstr "Eraser\tCtrl+E"

#: appGUI/MainGUI.py:673
msgid "Transform\tAlt+R"
msgstr "Transform\tAlt+R"

#: appGUI/MainGUI.py:700
msgid "Enable Plot"
msgstr "Enable Plot"

#: appGUI/MainGUI.py:702
msgid "Disable Plot"
msgstr "Disable Plot"

#: appGUI/MainGUI.py:706
msgid "Set Color"
msgstr "Set Color"

#: appGUI/MainGUI.py:709 app_Main.py:10134
msgid "Red"
msgstr "Red"

#: appGUI/MainGUI.py:712 app_Main.py:10136
msgid "Blue"
msgstr "Blue"

#: appGUI/MainGUI.py:715 app_Main.py:10139
msgid "Yellow"
msgstr "Yellow"

#: appGUI/MainGUI.py:718 app_Main.py:10141
msgid "Green"
msgstr "Green"

#: appGUI/MainGUI.py:721 app_Main.py:10143
msgid "Purple"
msgstr "Purple"

#: appGUI/MainGUI.py:724 app_Main.py:10145
msgid "Brown"
msgstr "Brown"

#: appGUI/MainGUI.py:727 app_Main.py:10147 app_Main.py:10203
msgid "White"
msgstr "White"

#: appGUI/MainGUI.py:730 app_Main.py:10149
msgid "Black"
msgstr "Black"

#: appGUI/MainGUI.py:735 app_Main.py:10152
msgid "Custom"
msgstr "Custom"

#: appGUI/MainGUI.py:740 app_Main.py:10186
msgid "Opacity"
msgstr "Opacity"

#: appGUI/MainGUI.py:743 app_Main.py:10162
msgid "Default"
msgstr "Default"

#: appGUI/MainGUI.py:748
msgid "Generate CNC"
msgstr "Generate CNC"

#: appGUI/MainGUI.py:750
msgid "View Source"
msgstr "View Source"

#: appGUI/MainGUI.py:755 appGUI/MainGUI.py:874 appGUI/MainGUI.py:1091
#: appGUI/MainGUI.py:1575 appGUI/MainGUI.py:2032 appGUI/MainGUI.py:2245
#: appGUI/MainGUI.py:4680 appGUI/ObjectUI.py:1001
#: appObjects/FlatCAMGeometry.py:552 appTools/ToolPanelize.py:325
#: appTools/ToolPanelize.py:351 appTools/ToolPanelize.py:448
#: appTools/ToolPanelize.py:477 appTools/ToolPanelize.py:538
msgid "Copy"
msgstr "Copy"

#: appGUI/MainGUI.py:763 appGUI/MainGUI.py:1236 appGUI/MainGUI.py:1588
#: appTools/ToolProperties.py:31
msgid "Properties"
msgstr "Properties"

#: appGUI/MainGUI.py:792
msgid "File Toolbar"
msgstr "File Toolbar"

#: appGUI/MainGUI.py:796
msgid "Edit Toolbar"
msgstr "Edit Toolbar"

#: appGUI/MainGUI.py:800
msgid "View Toolbar"
msgstr "View Toolbar"

#: appGUI/MainGUI.py:804
msgid "Shell Toolbar"
msgstr "Shell Toolbar"

#: appGUI/MainGUI.py:808
msgid "Tools Toolbar"
msgstr "Tools Toolbar"

#: appGUI/MainGUI.py:812
msgid "Excellon Editor Toolbar"
msgstr "Excellon Editor Toolbar"

#: appGUI/MainGUI.py:818
msgid "Geometry Editor Toolbar"
msgstr "Geometry Editor Toolbar"

#: appGUI/MainGUI.py:822
msgid "Gerber Editor Toolbar"
msgstr "Gerber Editor Toolbar"

#: appGUI/MainGUI.py:827 appGUI/MainGUI.py:1886
#, fuzzy
#| msgid "Coordinates copied to clipboard."
msgid "Delta Coordinates Toolbar"
msgstr "Coordinates copied to clipboard."

#: appGUI/MainGUI.py:830 appGUI/MainGUI.py:1894
#, fuzzy
#| msgid "Coordinates"
msgid "Coordinates Toolbar"
msgstr "Coordinates"

#: appGUI/MainGUI.py:833 appGUI/MainGUI.py:1902
msgid "Grid Toolbar"
msgstr "Grid Toolbar"

#: appGUI/MainGUI.py:842 appGUI/MainGUI.py:1910
#, fuzzy
#| msgid "Edit Toolbar"
msgid "Status Toolbar"
msgstr "Edit Toolbar"

#: appGUI/MainGUI.py:854 appGUI/MainGUI.py:2011 app_Main.py:7104
#: app_Main.py:7109
msgid "Open Gerber"
msgstr "Open Gerber"

#: appGUI/MainGUI.py:856 appGUI/MainGUI.py:2013 app_Main.py:7144
#: app_Main.py:7149
msgid "Open Excellon"
msgstr "Open Excellon"

#: appGUI/MainGUI.py:859 appGUI/MainGUI.py:2016
msgid "Open project"
msgstr "Open project"

#: appGUI/MainGUI.py:861 appGUI/MainGUI.py:2018
msgid "Save project"
msgstr "Save project"

#: appGUI/MainGUI.py:867 appGUI/MainGUI.py:2024
msgid "Editor"
msgstr "Editor"

#: appGUI/MainGUI.py:869 appGUI/MainGUI.py:2027
msgid "Save Object and close the Editor"
msgstr "Save Object and close the Editor"

#: appGUI/MainGUI.py:876 appGUI/MainGUI.py:2034
msgid "&Delete"
msgstr "&Delete"

#: appGUI/MainGUI.py:879 appGUI/MainGUI.py:2037 appGUI/MainGUI.py:4269
#: appGUI/MainGUI.py:4477 appTools/ToolDistance.py:100
#: appTools/ToolDistance.py:544
msgid "Distance Tool"
msgstr "Distance Tool"

#: appGUI/MainGUI.py:881 appGUI/MainGUI.py:2039
msgid "Distance Min Tool"
msgstr "Distance Min Tool"

#: appGUI/MainGUI.py:883 appGUI/MainGUI.py:2041 appGUI/MainGUI.py:4262
msgid "Set Origin"
msgstr "Set Origin"

#: appGUI/MainGUI.py:885 appGUI/MainGUI.py:2043
msgid "Move to Origin"
msgstr "Move to Origin"

#: appGUI/MainGUI.py:888 appGUI/MainGUI.py:2045
msgid "Jump to Location"
msgstr "Jump to Location"

#: appGUI/MainGUI.py:890 appGUI/MainGUI.py:2047 appGUI/MainGUI.py:4274
msgid "Locate in Object"
msgstr "Locate in Object"

#: appGUI/MainGUI.py:896 appGUI/MainGUI.py:2053
msgid "&Replot"
msgstr "&Replot"

#: appGUI/MainGUI.py:898 appGUI/MainGUI.py:2055
msgid "&Clear plot"
msgstr "&Clear plot"

#: appGUI/MainGUI.py:900 appGUI/MainGUI.py:2057 appGUI/MainGUI.py:4265
msgid "Zoom In"
msgstr "Zoom In"

#: appGUI/MainGUI.py:902 appGUI/MainGUI.py:2059 appGUI/MainGUI.py:4265
msgid "Zoom Out"
msgstr "Zoom Out"

#: appGUI/MainGUI.py:904 appGUI/MainGUI.py:1479 appGUI/MainGUI.py:2061
#: appGUI/MainGUI.py:4264
msgid "Zoom Fit"
msgstr "Zoom Fit"

#: appGUI/MainGUI.py:912 appGUI/MainGUI.py:2067
msgid "&Command Line"
msgstr "&Command Line"

#: appGUI/MainGUI.py:924 appGUI/MainGUI.py:2079
msgid "2Sided Tool"
msgstr "2Sided Tool"

#: appGUI/MainGUI.py:926 appGUI/MainGUI.py:2081 appGUI/MainGUI.py:4280
msgid "Align Objects Tool"
msgstr "Align Objects Tool"

#: appGUI/MainGUI.py:928 appGUI/MainGUI.py:2083 appGUI/MainGUI.py:4280
#: appTools/ToolExtractDrills.py:98
msgid "Extract Drills Tool"
msgstr "Extract Drills Tool"

#: appGUI/MainGUI.py:931 appGUI/ObjectUI.py:361 appTools/ToolCutOut.py:156
#: appTools/ToolCutOut.py:2050
msgid "Cutout Tool"
msgstr "Cutout Tool"

#: appGUI/MainGUI.py:933 appGUI/MainGUI.py:2088 appGUI/ObjectUI.py:346
#: appGUI/ObjectUI.py:1662 appTools/ToolNCC.py:197
msgid "NCC Tool"
msgstr "NCC Tool"

#: appGUI/MainGUI.py:937 appGUI/MainGUI.py:2092 appGUI/MainGUI.py:4282
#: appTools/ToolIsolation.py:189 appTools/ToolIsolation.py:2900
msgid "Isolation Tool"
msgstr "Isolation Tool"

#: appGUI/MainGUI.py:939 appGUI/MainGUI.py:2094 appGUI/ObjectUI.py:643
#: appTools/ToolDrilling.py:245 appTools/ToolDrilling.py:1979
#: appTools/ToolMilling.py:169
#, fuzzy
#| msgid "Drilling"
msgid "Drilling Tool"
msgstr "Drilling"

#: appGUI/MainGUI.py:943 appGUI/MainGUI.py:2098
msgid "Panel Tool"
msgstr "Panel Tool"

#: appGUI/MainGUI.py:945 appGUI/MainGUI.py:2100 appTools/ToolFilm.py:108
msgid "Film Tool"
msgstr "Film Tool"

#: appGUI/MainGUI.py:947 appGUI/MainGUI.py:2102 appTools/ToolSolderPaste.py:116
msgid "SolderPaste Tool"
msgstr "SolderPaste Tool"

#: appGUI/MainGUI.py:949 appGUI/MainGUI.py:2104 appGUI/MainGUI.py:4287
#: appTools/ToolSub.py:611
msgid "Subtract Tool"
msgstr "Subtract Tool"

#: appGUI/MainGUI.py:951 appGUI/MainGUI.py:2106 appTools/ToolRulesCheck.py:115
msgid "Rules Tool"
msgstr "Rules Tool"

#: appGUI/MainGUI.py:953 appGUI/MainGUI.py:2108 appGUI/MainGUI.py:4284
#: appTools/ToolOptimal.py:103 appTools/ToolOptimal.py:390
msgid "Optimal Tool"
msgstr "Optimal Tool"

#: appGUI/MainGUI.py:958 appGUI/MainGUI.py:2113 appGUI/MainGUI.py:4280
msgid "Calculators Tool"
msgstr "Calculators Tool"

#: appGUI/MainGUI.py:962 appGUI/MainGUI.py:2117 appGUI/MainGUI.py:4285
#: appTools/ToolQRCode.py:114 appTools/ToolQRCode.py:629
msgid "QRCode Tool"
msgstr "QRCode Tool"

#: appGUI/MainGUI.py:964 appGUI/MainGUI.py:2119 appGUI/MainGUI.py:4282
#: appTools/ToolCopperThieving.py:126 appTools/ToolCopperThieving.py:1131
msgid "Copper Thieving Tool"
msgstr "Copper Thieving Tool"

#: appGUI/MainGUI.py:967 appGUI/MainGUI.py:2122 appGUI/MainGUI.py:4281
#: appTools/ToolFiducials.py:114 appTools/ToolFiducials.py:648
msgid "Fiducials Tool"
msgstr "Fiducials Tool"

#: appGUI/MainGUI.py:969 appGUI/MainGUI.py:2124 appTools/ToolCalibration.py:115
#: appTools/ToolCalibration.py:735
msgid "Calibration Tool"
msgstr "Calibration Tool"

#: appGUI/MainGUI.py:971 appGUI/MainGUI.py:2126 appGUI/MainGUI.py:4282
msgid "Punch Gerber Tool"
msgstr "Punch Gerber Tool"

#: appGUI/MainGUI.py:973 appGUI/MainGUI.py:2128
#: appTools/ToolInvertGerber.py:175
msgid "Invert Gerber Tool"
msgstr "Invert Gerber Tool"

#: appGUI/MainGUI.py:975 appGUI/MainGUI.py:2130 appGUI/MainGUI.py:4284
#: appTools/ToolCorners.py:297
msgid "Corner Markers Tool"
msgstr "Corner Markers Tool"

#: appGUI/MainGUI.py:977 appGUI/MainGUI.py:2132
#: appTools/ToolEtchCompensation.py:80 appTools/ToolEtchCompensation.py:251
msgid "Etch Compensation Tool"
msgstr "Etch Compensation Tool"

#: appGUI/MainGUI.py:983 appGUI/MainGUI.py:1009 appGUI/MainGUI.py:1061
#: appGUI/MainGUI.py:2138 appGUI/MainGUI.py:2216
msgid "Select"
msgstr "Select"

#: appGUI/MainGUI.py:985 appGUI/MainGUI.py:2140
msgid "Add Drill Hole"
msgstr "Add Drill Hole"

#: appGUI/MainGUI.py:987 appGUI/MainGUI.py:2142
msgid "Add Drill Hole Array"
msgstr "Add Drill Hole Array"

#: appGUI/MainGUI.py:989 appGUI/MainGUI.py:1567 appGUI/MainGUI.py:2146
#: appGUI/MainGUI.py:4562
msgid "Add Slot"
msgstr "Add Slot"

#: appGUI/MainGUI.py:991 appGUI/MainGUI.py:1569 appGUI/MainGUI.py:2148
#: appGUI/MainGUI.py:4561
msgid "Add Slot Array"
msgstr "Add Slot Array"

#: appGUI/MainGUI.py:993 appGUI/MainGUI.py:1572 appGUI/MainGUI.py:2144
msgid "Resize Drill"
msgstr "Resize Drill"

#: appGUI/MainGUI.py:997 appGUI/MainGUI.py:2152
msgid "Copy Drill"
msgstr "Copy Drill"

#: appGUI/MainGUI.py:999 appGUI/MainGUI.py:2154
msgid "Delete Drill"
msgstr "Delete Drill"

#: appGUI/MainGUI.py:1003 appGUI/MainGUI.py:2158
msgid "Move Drill"
msgstr "Move Drill"

#: appGUI/MainGUI.py:1011 appGUI/MainGUI.py:2166
msgid "Add Circle"
msgstr "Add Circle"

#: appGUI/MainGUI.py:1013 appGUI/MainGUI.py:2168
msgid "Add Arc"
msgstr "Add Arc"

#: appGUI/MainGUI.py:1015 appGUI/MainGUI.py:2170
msgid "Add Rectangle"
msgstr "Add Rectangle"

#: appGUI/MainGUI.py:1019 appGUI/MainGUI.py:2174
msgid "Add Path"
msgstr "Add Path"

#: appGUI/MainGUI.py:1021 appGUI/MainGUI.py:2176
msgid "Add Polygon"
msgstr "Add Polygon"

#: appGUI/MainGUI.py:1024 appGUI/MainGUI.py:2179
msgid "Add Text"
msgstr "Add Text"

#: appGUI/MainGUI.py:1026 appGUI/MainGUI.py:2181
msgid "Add Buffer"
msgstr "Add Buffer"

#: appGUI/MainGUI.py:1028 appGUI/MainGUI.py:2183
msgid "Paint Shape"
msgstr "Paint Shape"

#: appGUI/MainGUI.py:1030 appGUI/MainGUI.py:1087 appGUI/MainGUI.py:1508
#: appGUI/MainGUI.py:1553 appGUI/MainGUI.py:2185 appGUI/MainGUI.py:2241
msgid "Eraser"
msgstr "Eraser"

#: appGUI/MainGUI.py:1034 appGUI/MainGUI.py:2189
msgid "Polygon Union"
msgstr "Polygon Union"

#: appGUI/MainGUI.py:1036 appGUI/MainGUI.py:2191
msgid "Polygon Explode"
msgstr "Polygon Explode"

#: appGUI/MainGUI.py:1039 appGUI/MainGUI.py:2194
msgid "Polygon Intersection"
msgstr "Polygon Intersection"

#: appGUI/MainGUI.py:1041 appGUI/MainGUI.py:2196
msgid "Polygon Subtraction"
msgstr "Polygon Subtraction"

#: appGUI/MainGUI.py:1045 appGUI/MainGUI.py:2200
msgid "Cut Path"
msgstr "Cut Path"

#: appGUI/MainGUI.py:1047
msgid "Copy Shape(s)"
msgstr "Copy Shape(s)"

#: appGUI/MainGUI.py:1050
msgid "Delete Shape '-'"
msgstr "Delete Shape '-'"

#: appGUI/MainGUI.py:1052 appGUI/MainGUI.py:1095 appGUI/MainGUI.py:1520
#: appGUI/MainGUI.py:1557 appGUI/MainGUI.py:2206 appGUI/MainGUI.py:2249
#: appGUI/ObjectUI.py:109 appGUI/ObjectUI.py:152
msgid "Transformations"
msgstr "Transformations"

#: appGUI/MainGUI.py:1055
msgid "Move Objects "
msgstr "Move Objects "

#: appGUI/MainGUI.py:1063 appGUI/MainGUI.py:2218 appGUI/MainGUI.py:4681
msgid "Add Pad"
msgstr "Add Pad"

#: appGUI/MainGUI.py:1067 appGUI/MainGUI.py:2222 appGUI/MainGUI.py:4682
msgid "Add Track"
msgstr "Add Track"

#: appGUI/MainGUI.py:1069 appGUI/MainGUI.py:2224 appGUI/MainGUI.py:4681
msgid "Add Region"
msgstr "Add Region"

#: appGUI/MainGUI.py:1071 appGUI/MainGUI.py:1539 appGUI/MainGUI.py:2226
msgid "Poligonize"
msgstr "Poligonize"

#: appGUI/MainGUI.py:1074 appGUI/MainGUI.py:1541 appGUI/MainGUI.py:2229
msgid "SemiDisc"
msgstr "SemiDisc"

#: appGUI/MainGUI.py:1076 appGUI/MainGUI.py:1543 appGUI/MainGUI.py:2231
msgid "Disc"
msgstr "Disc"

#: appGUI/MainGUI.py:1084 appGUI/MainGUI.py:1551 appGUI/MainGUI.py:2239
msgid "Mark Area"
msgstr "Mark Area"

#: appGUI/MainGUI.py:1098 appGUI/MainGUI.py:1524 appGUI/MainGUI.py:1586
#: appGUI/MainGUI.py:2252 appGUI/MainGUI.py:4681 appTools/ToolMove.py:27
msgid "Move"
msgstr "Move"

#: appGUI/MainGUI.py:1106
msgid "Snap to grid"
msgstr "Snap to grid"

#: appGUI/MainGUI.py:1109
msgid "Grid X snapping distance"
msgstr "Grid X snapping distance"

#: appGUI/MainGUI.py:1114
msgid ""
"When active, value on Grid_X\n"
"is copied to the Grid_Y value."
msgstr ""
"When active, value on Grid_X\n"
"is copied to the Grid_Y value."

#: appGUI/MainGUI.py:1121
msgid "Grid Y snapping distance"
msgstr "Grid Y snapping distance"

#: appGUI/MainGUI.py:1128
msgid "Snap to corner"
msgstr "Snap to corner"

#: appGUI/MainGUI.py:1132 appGUI/preferences/general/GeneralAPPSetGroupUI.py:78
msgid "Max. magnet distance"
msgstr "Max. magnet distance"

#: appGUI/MainGUI.py:1142
msgid "Toggle the display of axis on canvas"
msgstr "Toggle the display of axis on canvas"

#: appGUI/MainGUI.py:1148 appGUI/preferences/PreferencesUIManager.py:891
#: appGUI/preferences/PreferencesUIManager.py:984
#: appGUI/preferences/PreferencesUIManager.py:1012
#: appGUI/preferences/PreferencesUIManager.py:1117 app_Main.py:5579
#: app_Main.py:5584 app_Main.py:5599
msgid "Preferences"
msgstr "Preferences"

#: appGUI/MainGUI.py:1154
msgid "Command Line"
msgstr "Command Line"

#: appGUI/MainGUI.py:1160
msgid "HUD (Heads up display)"
msgstr "HUD (Heads up display)"

#: appGUI/MainGUI.py:1166 appGUI/preferences/general/GeneralAPPSetGroupUI.py:97
msgid ""
"Draw a delimiting rectangle on canvas.\n"
"The purpose is to illustrate the limits for our work."
msgstr ""
"Draw a delimiting rectangle on canvas.\n"
"The purpose is to illustrate the limits for our work."

#: appGUI/MainGUI.py:1179
msgid ""
"Relative measurement.\n"
"Reference is last click position"
msgstr ""
"Relative measurement.\n"
"Reference is last click position"

#: appGUI/MainGUI.py:1187
msgid ""
"Absolute measurement.\n"
"Reference is (X=0, Y= 0) position"
msgstr ""
"Absolute measurement.\n"
"Reference is (X=0, Y= 0) position"

#: appGUI/MainGUI.py:1221 appGUI/MainGUI.py:1470 app_Main.py:8143
msgid "Project"
msgstr "Project"

#: appGUI/MainGUI.py:1264 appGUI/MainGUI.py:1272
msgid "Plot Area"
msgstr "Plot Area"

#: appGUI/MainGUI.py:1314 appTools/ToolCopperThieving.py:1163
#: appTools/ToolCorners.py:317 appTools/ToolEtchCompensation.py:291
#: appTools/ToolExtractDrills.py:453 appTools/ToolFiducials.py:873
#: appTools/ToolInvertGerber.py:215 appTools/ToolIsolation.py:2948
#: appTools/ToolOptimal.py:421 appTools/ToolPunchGerber.py:718
#: appTools/ToolQRCode.py:660 appTools/ToolRulesCheck.py:1163
#: appTools/ToolSolderPaste.py:1143 appTools/ToolSub.py:641
msgid "GERBER"
msgstr "GERBER"

#: appGUI/MainGUI.py:1324 appTools/ToolDrilling.py:2032
#: appTools/ToolMilling.py:1637 appTools/ToolRulesCheck.py:1301
msgid "EXCELLON"
msgstr "EXCELLON"

#: appGUI/MainGUI.py:1334 appTools/ToolSub.py:696
msgid "GEOMETRY"
msgstr "GEOMETRY"

#: appGUI/MainGUI.py:1344
msgid "CNC-JOB"
msgstr "CNC-JOB"

#: appGUI/MainGUI.py:1353 appGUI/ObjectUI.py:327 appGUI/ObjectUI.py:639
#: appGUI/ObjectUI.py:1636
msgid "TOOLS"
msgstr "TOOLS"

#: appGUI/MainGUI.py:1362
msgid "TOOLS 2"
msgstr "TOOLS 2"

#: appGUI/MainGUI.py:1372
msgid "UTILITIES"
msgstr "UTILITIES"

#: appGUI/MainGUI.py:1388
#: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:201
msgid "Restore Defaults"
msgstr "Restore Defaults"

#: appGUI/MainGUI.py:1392
msgid ""
"Restore the entire set of default values\n"
"to the initial values loaded after first launch."
msgstr ""
"Restore the entire set of default values\n"
"to the initial values loaded after first launch."

#: appGUI/MainGUI.py:1397
msgid "Open Pref Folder"
msgstr "Open Pref Folder"

#: appGUI/MainGUI.py:1401
msgid "Open the folder where FlatCAM save the preferences files."
msgstr "Open the folder where FlatCAM save the preferences files."

#: appGUI/MainGUI.py:1405 appGUI/MainGUI.py:1982
msgid "Clear GUI Settings"
msgstr "Clear GUI Settings"

#: appGUI/MainGUI.py:1410
msgid ""
"Clear the GUI settings for FlatCAM,\n"
"such as: layout, gui state, style, hdpi support etc."
msgstr ""
"Clear the GUI settings for FlatCAM,\n"
"such as: layout, gui state, style, hdpi support etc."

#: appGUI/MainGUI.py:1422
msgid "Apply"
msgstr "Apply"

#: appGUI/MainGUI.py:1425
msgid "Apply the current preferences without saving to a file."
msgstr "Apply the current preferences without saving to a file."

#: appGUI/MainGUI.py:1433
msgid ""
"Save the current settings in the 'current_defaults' file\n"
"which is the file storing the working default preferences."
msgstr ""
"Save the current settings in the 'current_defaults' file\n"
"which is the file storing the working default preferences."

#: appGUI/MainGUI.py:1441
msgid "Will not save the changes and will close the preferences window."
msgstr "Will not save the changes and will close the preferences window."

#: appGUI/MainGUI.py:1455
msgid "Toggle Visibility"
msgstr "Toggle Visibility"

#: appGUI/MainGUI.py:1461 appGUI/ObjectUI.py:2167
msgid "New"
msgstr "New"

#: appGUI/MainGUI.py:1463
#: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:78
#: appTools/ToolCalibration.py:171 appTools/ToolCalibration.py:1326
#: appTools/ToolCalibration.py:1343 appTools/ToolCopperThieving.py:163
#: appTools/ToolCopperThieving.py:1237 appTools/ToolCopperThieving.py:1251
#: appTools/ToolCutOut.py:2008 appTools/ToolDblSided.py:529
#: appTools/ToolDblSided.py:774 appTools/ToolFilm.py:929
#: appTools/ToolFilm.py:952 appTools/ToolImage.py:136 appTools/ToolImage.py:191
#: appTools/ToolIsolation.py:796 appTools/ToolIsolation.py:3290
#: appTools/ToolIsolation.py:3343 appTools/ToolNCC.py:792
#: appTools/ToolNCC.py:3740 appTools/ToolNCC.py:4215 appTools/ToolPaint.py:167
#: appTools/ToolPaint.py:3142 appTools/ToolPanelize.py:147
#: appTools/ToolPanelize.py:167 appTools/ToolPanelize.py:715
#: appTools/ToolTransform.py:126 appTools/ToolTransform.py:587
msgid "Geometry"
msgstr "Geometry"

#: appGUI/MainGUI.py:1467
#: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:99
#: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:77
#: appTools/ToolAlignObjects.py:399 appTools/ToolAlignObjects.py:435
#: appTools/ToolCalibration.py:163 appTools/ToolCalibration.py:171
#: appTools/ToolCalibration.py:892 appTools/ToolCalibration.py:1326
#: appTools/ToolCalibration.py:1343 appTools/ToolCopperThieving.py:163
#: appTools/ToolCopperThieving.py:1237 appTools/ToolCopperThieving.py:1251
#: appTools/ToolDblSided.py:530 appTools/ToolDblSided.py:731
#: appTools/ToolDblSided.py:773 appTools/ToolFilm.py:1207
#: appTools/ToolIsolation.py:796 appTools/ToolIsolation.py:3343
#: appTools/ToolNCC.py:792 appTools/ToolNCC.py:4215 appTools/ToolPaint.py:167
#: appTools/ToolPaint.py:3142 appTools/ToolPanelize.py:147
#: appTools/ToolPunchGerber.py:803 appTools/ToolPunchGerber.py:818
#: appTools/ToolTransform.py:126 appTools/ToolTransform.py:586
msgid "Excellon"
msgstr "Excellon"

#: appGUI/MainGUI.py:1474
msgid "Grids"
msgstr "Grids"

#: appGUI/MainGUI.py:1481
msgid "Clear Plot"
msgstr "Clear Plot"

#: appGUI/MainGUI.py:1483
msgid "Replot"
msgstr "Replot"

#: appGUI/MainGUI.py:1487
msgid "Geo Editor"
msgstr "Geo Editor"

#: appGUI/MainGUI.py:1489
msgid "Path"
msgstr "Path"

#: appGUI/MainGUI.py:1491
msgid "Rectangle"
msgstr "Rectangle"

#: appGUI/MainGUI.py:1494
msgid "Circle"
msgstr "Circle"

#: appGUI/MainGUI.py:1498
msgid "Arc"
msgstr "Arc"

#: appGUI/MainGUI.py:1512
msgid "Union"
msgstr "Union"

#: appGUI/MainGUI.py:1514
msgid "Intersection"
msgstr "Intersection"

#: appGUI/MainGUI.py:1516
msgid "Subtraction"
msgstr "Subtraction"

#: appGUI/MainGUI.py:1518 appGUI/ObjectUI.py:1729
#: appGUI/preferences/cncjob/CNCJobOptPrefGroupUI.py:63
msgid "Cut"
msgstr "Cut"

#: appGUI/MainGUI.py:1529
msgid "Pad"
msgstr "Pad"

#: appGUI/MainGUI.py:1531
msgid "Pad Array"
msgstr "Pad Array"

#: appGUI/MainGUI.py:1535
msgid "Track"
msgstr "Track"

#: appGUI/MainGUI.py:1537
msgid "Region"
msgstr "Region"

#: appGUI/MainGUI.py:1560
msgid "Exc Editor"
msgstr "Exc Editor"

#: appGUI/MainGUI.py:1562 appGUI/MainGUI.py:4560
msgid "Add Drill"
msgstr "Add Drill"

#: appGUI/MainGUI.py:1581 app_Main.py:2285
msgid "Close Editor"
msgstr "Close Editor"

#: appGUI/MainGUI.py:1612
msgid "Application units"
msgstr "Application units"

#: appGUI/MainGUI.py:1707
msgid "Lock Toolbars"
msgstr "Lock Toolbars"

#: appGUI/MainGUI.py:1863
msgid "Detachable Tabs"
msgstr "Detachable Tabs"

#: appGUI/MainGUI.py:1963
msgid "FlatCAM Preferences Folder opened."
msgstr "FlatCAM Preferences Folder opened."

#: appGUI/MainGUI.py:1981
msgid "Are you sure you want to delete the GUI Settings? \n"
msgstr "Are you sure you want to delete the GUI Settings? \n"

#: appGUI/MainGUI.py:1986 appGUI/preferences/PreferencesUIManager.py:923
#: appGUI/preferences/PreferencesUIManager.py:1169 appTranslation.py:112
#: appTranslation.py:214 app_Main.py:2289 app_Main.py:3384 app_Main.py:5809
#: app_Main.py:6893
msgid "Yes"
msgstr "Yes"

#: appGUI/MainGUI.py:1987 appGUI/preferences/PreferencesUIManager.py:1170
#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:49
#: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:62
#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:164
#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:150
#: appTools/ToolDrilling.py:2090 appTools/ToolIsolation.py:3028
#: appTools/ToolMilling.py:1695 appTools/ToolNCC.py:3827
#: appTools/ToolPaint.py:2850 appTranslation.py:113 appTranslation.py:215
#: app_Main.py:2290 app_Main.py:3385 app_Main.py:5810 app_Main.py:6894
msgid "No"
msgstr "No"

#: appGUI/MainGUI.py:2086
msgid "&Cutout Tool"
msgstr "&Cutout Tool"

#: appGUI/MainGUI.py:2164
msgid "Select 'Esc'"
msgstr "Select 'Esc'"

#: appGUI/MainGUI.py:2202
msgid "Copy Objects"
msgstr "Copy Objects"

#: appGUI/MainGUI.py:2204 appGUI/MainGUI.py:4480
msgid "Delete Shape"
msgstr "Delete Shape"

#: appGUI/MainGUI.py:2210
msgid "Move Objects"
msgstr "Move Objects"

#: appGUI/MainGUI.py:2796
msgid ""
"Please first select a geometry item to be cutted\n"
"then select the geometry item that will be cutted\n"
"out of the first item. In the end press ~X~ key or\n"
"the toolbar button."
msgstr ""
"Please first select a geometry item to be cutted\n"
"then select the geometry item that will be cutted\n"
"out of the first item. In the end press ~X~ key or\n"
"the toolbar button."

#: appGUI/MainGUI.py:2803 appGUI/MainGUI.py:2967 appGUI/MainGUI.py:3014
#: appGUI/MainGUI.py:3036
msgid "Warning"
msgstr "Warning"

#: appGUI/MainGUI.py:2962
msgid ""
"Please select geometry items \n"
"on which to perform Intersection Tool."
msgstr ""
"Please select geometry items \n"
"on which to perform Intersection Tool."

#: appGUI/MainGUI.py:3009
msgid ""
"Please select geometry items \n"
"on which to perform Substraction Tool."
msgstr ""
"Please select geometry items \n"
"on which to perform Substraction Tool."

#: appGUI/MainGUI.py:3031
msgid ""
"Please select geometry items \n"
"on which to perform union."
msgstr ""
"Please select geometry items \n"
"on which to perform union."

#: appGUI/MainGUI.py:3116 appGUI/MainGUI.py:3331
msgid "Cancelled. Nothing selected to delete."
msgstr "Cancelled. Nothing selected to delete."

#: appGUI/MainGUI.py:3200 appGUI/MainGUI.py:3447
msgid "Cancelled. Nothing selected to copy."
msgstr "Cancelled. Nothing selected to copy."

#: appGUI/MainGUI.py:3246 appGUI/MainGUI.py:3476
msgid "Cancelled. Nothing selected to move."
msgstr "Cancelled. Nothing selected to move."

#: appGUI/MainGUI.py:3502
msgid "New Tool ..."
msgstr "New Tool ..."

#: appGUI/MainGUI.py:3503 appTools/ToolIsolation.py:777 appTools/ToolNCC.py:450
#: appTools/ToolPaint.py:387 appTools/ToolSolderPaste.py:123
msgid "Enter a Tool Diameter"
msgstr "Enter a Tool Diameter"

#: appGUI/MainGUI.py:3515
msgid "Adding Tool cancelled ..."
msgstr "Adding Tool cancelled ..."

#: appGUI/MainGUI.py:3545
msgid "Distance Tool exit..."
msgstr "Distance Tool exit..."

#: appGUI/MainGUI.py:3725 app_Main.py:3372
msgid "Application is saving the project. Please wait ..."
msgstr "Application is saving the project. Please wait ..."

#: appGUI/MainGUI.py:3858
msgid "Shell enabled."
msgstr "Shell enabled."

#: appGUI/MainGUI.py:3861
msgid "Shell disabled."
msgstr "Shell disabled."

#: appGUI/MainGUI.py:3875 app_Main.py:9689
msgid "<b>Shortcut Key List</b>"
msgstr "<b>Shortcut Key List</b>"

#: appGUI/MainGUI.py:4258
msgid "General Shortcut list"
msgstr "General Shortcut list"

#: appGUI/MainGUI.py:4259
msgid "SHOW SHORTCUT LIST"
msgstr "SHOW SHORTCUT LIST"

#: appGUI/MainGUI.py:4259
msgid "Switch to Project Tab"
msgstr "Switch to Project Tab"

#: appGUI/MainGUI.py:4259
msgid "Switch to Selected Tab"
msgstr "Switch to Selected Tab"

#: appGUI/MainGUI.py:4260
msgid "Switch to Tool Tab"
msgstr "Switch to Tool Tab"

#: appGUI/MainGUI.py:4261
msgid "New Gerber"
msgstr "New Gerber"

#: appGUI/MainGUI.py:4261
msgid "Edit Object (if selected)"
msgstr "Edit Object (if selected)"

#: appGUI/MainGUI.py:4261 app_Main.py:6109
msgid "Grid On/Off"
msgstr "Grid On/Off"

#: appGUI/MainGUI.py:4261
msgid "Jump to Coordinates"
msgstr "Jump to Coordinates"

#: appGUI/MainGUI.py:4262
msgid "New Excellon"
msgstr "New Excellon"

#: appGUI/MainGUI.py:4262
msgid "Move Obj"
msgstr "Move Obj"

#: appGUI/MainGUI.py:4262
msgid "New Geometry"
msgstr "New Geometry"

#: appGUI/MainGUI.py:4262
msgid "Change Units"
msgstr "Change Units"

#: appGUI/MainGUI.py:4263
msgid "Open Properties Tool"
msgstr "Open Properties Tool"

#: appGUI/MainGUI.py:4263
msgid "Rotate by 90 degree CW"
msgstr "Rotate by 90 degree CW"

#: appGUI/MainGUI.py:4263
msgid "Shell Toggle"
msgstr "Shell Toggle"

#: appGUI/MainGUI.py:4264
msgid ""
"Add a Tool (when in Geometry Selected Tab or in Tools NCC or Tools Paint)"
msgstr ""
"Add a Tool (when in Geometry Selected Tab or in Tools NCC or Tools Paint)"

#: appGUI/MainGUI.py:4265
msgid "Flip on X_axis"
msgstr "Flip on X_axis"

#: appGUI/MainGUI.py:4265
msgid "Flip on Y_axis"
msgstr "Flip on Y_axis"

#: appGUI/MainGUI.py:4268
msgid "Copy Obj"
msgstr "Copy Obj"

#: appGUI/MainGUI.py:4268
msgid "Open Tools Database"
msgstr "Open Tools Database"

#: appGUI/MainGUI.py:4269
msgid "Open Excellon File"
msgstr "Open Excellon File"

#: appGUI/MainGUI.py:4269
msgid "Open Gerber File"
msgstr "Open Gerber File"

#: appGUI/MainGUI.py:4269
msgid "New Project"
msgstr "New Project"

#: appGUI/MainGUI.py:4270 app_Main.py:7223 app_Main.py:7226
msgid "Open Project"
msgstr "Open Project"

#: appGUI/MainGUI.py:4270 appTools/ToolPDF.py:41
msgid "PDF Import Tool"
msgstr "PDF Import Tool"

#: appGUI/MainGUI.py:4270
msgid "Save Project"
msgstr "Save Project"

#: appGUI/MainGUI.py:4270
msgid "Toggle Plot Area"
msgstr "Toggle Plot Area"

#: appGUI/MainGUI.py:4273
msgid "Copy Obj_Name"
msgstr "Copy Obj_Name"

#: appGUI/MainGUI.py:4274
msgid "Toggle Code Editor"
msgstr "Toggle Code Editor"

#: appGUI/MainGUI.py:4274
msgid "Toggle the axis"
msgstr "Toggle the axis"

#: appGUI/MainGUI.py:4274 appGUI/MainGUI.py:4475 appGUI/MainGUI.py:4562
#: appGUI/MainGUI.py:4684
msgid "Distance Minimum Tool"
msgstr "Distance Minimum Tool"

#: appGUI/MainGUI.py:4275
msgid "Open Preferences Window"
msgstr "Open Preferences Window"

#: appGUI/MainGUI.py:4276
msgid "Rotate by 90 degree CCW"
msgstr "Rotate by 90 degree CCW"

#: appGUI/MainGUI.py:4276
msgid "Run a Script"
msgstr "Run a Script"

#: appGUI/MainGUI.py:4276
msgid "Toggle the workspace"
msgstr "Toggle the workspace"

#: appGUI/MainGUI.py:4276
msgid "Skew on X axis"
msgstr "Skew on X axis"

#: appGUI/MainGUI.py:4277
msgid "Skew on Y axis"
msgstr "Skew on Y axis"

#: appGUI/MainGUI.py:4280
msgid "2-Sided PCB Tool"
msgstr "2-Sided PCB Tool"

#: appGUI/MainGUI.py:4281
msgid "Toggle Grid Lines"
msgstr "Toggle Grid Lines"

#: appGUI/MainGUI.py:4283
msgid "Solder Paste Dispensing Tool"
msgstr "Solder Paste Dispensing Tool"

#: appGUI/MainGUI.py:4284
msgid "Film PCB Tool"
msgstr "Film PCB Tool"

#: appGUI/MainGUI.py:4284
msgid "Non-Copper Clearing Tool"
msgstr "Non-Copper Clearing Tool"

#: appGUI/MainGUI.py:4285
msgid "Paint Area Tool"
msgstr "Paint Area Tool"

#: appGUI/MainGUI.py:4285
msgid "Rules Check Tool"
msgstr "Rules Check Tool"

#: appGUI/MainGUI.py:4286
msgid "View File Source"
msgstr "View File Source"

#: appGUI/MainGUI.py:4286
msgid "Transformations Tool"
msgstr "Transformations Tool"

#: appGUI/MainGUI.py:4287
msgid "Cutout PCB Tool"
msgstr "Cutout PCB Tool"

#: appGUI/MainGUI.py:4287 appTools/ToolPanelize.py:35
#: appTools/ToolPanelize.py:634
msgid "Panelize PCB"
msgstr "Panelize PCB"

#: appGUI/MainGUI.py:4288
msgid "Enable all Plots"
msgstr "Enable all Plots"

#: appGUI/MainGUI.py:4288
msgid "Disable all Plots"
msgstr "Disable all Plots"

#: appGUI/MainGUI.py:4288
msgid "Disable Non-selected Plots"
msgstr "Disable Non-selected Plots"

#: appGUI/MainGUI.py:4289
msgid "Toggle Full Screen"
msgstr "Toggle Full Screen"

#: appGUI/MainGUI.py:4292
msgid "Abort current task (gracefully)"
msgstr "Abort current task (gracefully)"

#: appGUI/MainGUI.py:4295
msgid "Save Project As"
msgstr "Save Project As"

#: appGUI/MainGUI.py:4296
msgid ""
"Paste Special. Will convert a Windows path style to the one required in Tcl "
"Shell"
msgstr ""
"Paste Special. Will convert a Windows path style to the one required in Tcl "
"Shell"

#: appGUI/MainGUI.py:4299
msgid "Open Online Manual"
msgstr "Open Online Manual"

#: appGUI/MainGUI.py:4300
msgid "Open Online Tutorials"
msgstr "Open Online Tutorials"

#: appGUI/MainGUI.py:4300
msgid "Refresh Plots"
msgstr "Refresh Plots"

#: appGUI/MainGUI.py:4300 appTools/ToolSolderPaste.py:71
msgid "Delete Object"
msgstr "Delete Object"

#: appGUI/MainGUI.py:4300
msgid "Alternate: Delete Tool"
msgstr "Alternate: Delete Tool"

#: appGUI/MainGUI.py:4301
msgid "(left to Key_1)Toggle Notebook Area (Left Side)"
msgstr "(left to Key_1)Toggle Notebook Area (Left Side)"

#: appGUI/MainGUI.py:4301
msgid "En(Dis)able Obj Plot"
msgstr "En(Dis)able Obj Plot"

#: appGUI/MainGUI.py:4302
msgid "Deselects all objects"
msgstr "Deselects all objects"

#: appGUI/MainGUI.py:4316
msgid "Editor Shortcut list"
msgstr "Editor Shortcut list"

#: appGUI/MainGUI.py:4470
msgid "GEOMETRY EDITOR"
msgstr "GEOMETRY EDITOR"

#: appGUI/MainGUI.py:4470
msgid "Draw an Arc"
msgstr "Draw an Arc"

#: appGUI/MainGUI.py:4470
msgid "Copy Geo Item"
msgstr "Copy Geo Item"

#: appGUI/MainGUI.py:4471
msgid "Within Add Arc will toogle the ARC direction: CW or CCW"
msgstr "Within Add Arc will toogle the ARC direction: CW or CCW"

#: appGUI/MainGUI.py:4471
msgid "Polygon Intersection Tool"
msgstr "Polygon Intersection Tool"

#: appGUI/MainGUI.py:4472
msgid "Geo Paint Tool"
msgstr "Geo Paint Tool"

#: appGUI/MainGUI.py:4472 appGUI/MainGUI.py:4561 appGUI/MainGUI.py:4681
msgid "Jump to Location (x, y)"
msgstr "Jump to Location (x, y)"

#: appGUI/MainGUI.py:4472
msgid "Toggle Corner Snap"
msgstr "Toggle Corner Snap"

#: appGUI/MainGUI.py:4472
msgid "Move Geo Item"
msgstr "Move Geo Item"

#: appGUI/MainGUI.py:4473
msgid "Within Add Arc will cycle through the ARC modes"
msgstr "Within Add Arc will cycle through the ARC modes"

#: appGUI/MainGUI.py:4473
msgid "Draw a Polygon"
msgstr "Draw a Polygon"

#: appGUI/MainGUI.py:4473
msgid "Draw a Circle"
msgstr "Draw a Circle"

#: appGUI/MainGUI.py:4474
msgid "Draw a Path"
msgstr "Draw a Path"

#: appGUI/MainGUI.py:4474
msgid "Draw Rectangle"
msgstr "Draw Rectangle"

#: appGUI/MainGUI.py:4474
msgid "Polygon Subtraction Tool"
msgstr "Polygon Subtraction Tool"

#: appGUI/MainGUI.py:4474
msgid "Add Text Tool"
msgstr "Add Text Tool"

#: appGUI/MainGUI.py:4475
msgid "Polygon Union Tool"
msgstr "Polygon Union Tool"

#: appGUI/MainGUI.py:4475
msgid "Flip shape on X axis"
msgstr "Flip shape on X axis"

#: appGUI/MainGUI.py:4475
msgid "Flip shape on Y axis"
msgstr "Flip shape on Y axis"

#: appGUI/MainGUI.py:4476
msgid "Skew shape on X axis"
msgstr "Skew shape on X axis"

#: appGUI/MainGUI.py:4476
msgid "Skew shape on Y axis"
msgstr "Skew shape on Y axis"

#: appGUI/MainGUI.py:4476
msgid "Editor Transformation Tool"
msgstr "Editor Transformation Tool"

#: appGUI/MainGUI.py:4477
msgid "Offset shape on X axis"
msgstr "Offset shape on X axis"

#: appGUI/MainGUI.py:4477
msgid "Offset shape on Y axis"
msgstr "Offset shape on Y axis"

#: appGUI/MainGUI.py:4478 appGUI/MainGUI.py:4564 appGUI/MainGUI.py:4686
msgid "Save Object and Exit Editor"
msgstr "Save Object and Exit Editor"

#: appGUI/MainGUI.py:4478
msgid "Polygon Cut Tool"
msgstr "Polygon Cut Tool"

#: appGUI/MainGUI.py:4479
msgid "Rotate Geometry"
msgstr "Rotate Geometry"

#: appGUI/MainGUI.py:4479
msgid "Finish drawing for certain tools"
msgstr "Finish drawing for certain tools"

#: appGUI/MainGUI.py:4479 appGUI/MainGUI.py:4564 appGUI/MainGUI.py:4684
msgid "Abort and return to Select"
msgstr "Abort and return to Select"

#: appGUI/MainGUI.py:4560
msgid "EXCELLON EDITOR"
msgstr "EXCELLON EDITOR"

#: appGUI/MainGUI.py:4560
msgid "Copy Drill(s)"
msgstr "Copy Drill(s)"

#: appGUI/MainGUI.py:4561
msgid "Move Drill(s)"
msgstr "Move Drill(s)"

#: appGUI/MainGUI.py:4562
msgid "Add a new Tool"
msgstr "Add a new Tool"

#: appGUI/MainGUI.py:4563
msgid "Delete Drill(s)"
msgstr "Delete Drill(s)"

#: appGUI/MainGUI.py:4563
msgid "Alternate: Delete Tool(s)"
msgstr "Alternate: Delete Tool(s)"

#: appGUI/MainGUI.py:4680
msgid "GERBER EDITOR"
msgstr "GERBER EDITOR"

#: appGUI/MainGUI.py:4680
msgid "Add Disc"
msgstr "Add Disc"

#: appGUI/MainGUI.py:4680
msgid "Add SemiDisc"
msgstr "Add SemiDisc"

#: appGUI/MainGUI.py:4682
msgid "Within Track & Region Tools will cycle in REVERSE the bend modes"
msgstr "Within Track & Region Tools will cycle in REVERSE the bend modes"

#: appGUI/MainGUI.py:4683
msgid "Within Track & Region Tools will cycle FORWARD the bend modes"
msgstr "Within Track & Region Tools will cycle FORWARD the bend modes"

#: appGUI/MainGUI.py:4684
msgid "Alternate: Delete Apertures"
msgstr "Alternate: Delete Apertures"

#: appGUI/MainGUI.py:4685
msgid "Eraser Tool"
msgstr "Eraser Tool"

#: appGUI/MainGUI.py:4686
#: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:221
msgid "Mark Area Tool"
msgstr "Mark Area Tool"

#: appGUI/MainGUI.py:4686
msgid "Poligonize Tool"
msgstr "Poligonize Tool"

#: appGUI/MainGUI.py:4686
msgid "Transformation Tool"
msgstr "Transformation Tool"

#: appGUI/ObjectUI.py:38
msgid "App Object"
msgstr "App Object"

#: appGUI/ObjectUI.py:78 appTools/ToolDrilling.py:2015
#: appTools/ToolIsolation.py:2937 appTools/ToolMilling.py:1620
msgid ""
"BASIC is suitable for a beginner. Many parameters\n"
"are hidden from the user in this mode.\n"
"ADVANCED mode will make available all parameters.\n"
"\n"
"To change the application LEVEL, go to:\n"
"Edit -> Preferences -> General and check:\n"
"'APP. LEVEL' radio button."
msgstr ""
"BASIC is suitable for a beginner. Many parameters\n"
"are hidden from the user in this mode.\n"
"ADVANCED mode will make available all parameters.\n"
"\n"
"To change the application LEVEL, go to:\n"
"Edit -> Preferences -> General and check:\n"
"'APP. LEVEL' radio button."

#: appGUI/ObjectUI.py:111 appGUI/ObjectUI.py:155
msgid "Geometrical transformations of the current object."
msgstr "Geometrical transformations of the current object."

#: appGUI/ObjectUI.py:120
msgid ""
"Factor by which to multiply\n"
"geometric features of this object.\n"
"Expressions are allowed. E.g: 1/25.4"
msgstr ""
"Factor by which to multiply\n"
"geometric features of this object.\n"
"Expressions are allowed. E.g: 1/25.4"

#: appGUI/ObjectUI.py:127
msgid "Perform scaling operation."
msgstr "Perform scaling operation."

#: appGUI/ObjectUI.py:138
msgid ""
"Amount by which to move the object\n"
"in the x and y axes in (x, y) format.\n"
"Expressions are allowed. E.g: (1/3.2, 0.5*3)"
msgstr ""
"Amount by which to move the object\n"
"in the x and y axes in (x, y) format.\n"
"Expressions are allowed. E.g: (1/3.2, 0.5*3)"

#: appGUI/ObjectUI.py:145
msgid "Perform the offset operation."
msgstr "Perform the offset operation."

#: appGUI/ObjectUI.py:188
msgid "Gerber Object"
msgstr "Gerber Object"

#: appGUI/ObjectUI.py:197 appGUI/ObjectUI.py:497 appGUI/ObjectUI.py:779
#: appGUI/ObjectUI.py:1716 appGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:30
#: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:33
#: appGUI/preferences/geometry/GeometryGenPrefGroupUI.py:33
#: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:31
msgid "Plot Options"
msgstr "Plot Options"

#: appGUI/ObjectUI.py:202 appGUI/ObjectUI.py:500
#: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:47
#: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:45
#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:119
#: appTools/ToolCopperThieving.py:1284
msgid "Solid"
msgstr "Solid"

#: appGUI/ObjectUI.py:204 appGUI/preferences/gerber/GerberGenPrefGroupUI.py:47
msgid "Solid color polygons."
msgstr "Solid color polygons."

#: appGUI/ObjectUI.py:209 appGUI/ObjectUI.py:506 appGUI/ObjectUI.py:785
msgid "Multi-Color"
msgstr "Multi-Color"

#: appGUI/ObjectUI.py:211 appGUI/ObjectUI.py:508 appGUI/ObjectUI.py:787
#: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:56
#: appGUI/preferences/geometry/GeometryGenPrefGroupUI.py:49
#: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:54
msgid "Draw polygons in different colors."
msgstr "Draw polygons in different colors."

#: appGUI/ObjectUI.py:226 appGUI/ObjectUI.py:556
#: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:40
#: appGUI/preferences/geometry/GeometryGenPrefGroupUI.py:40
#: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:38
msgid "Plot"
msgstr "Plot"

#: appGUI/ObjectUI.py:227 appGUI/ObjectUI.py:558 appGUI/ObjectUI.py:864
#: appGUI/ObjectUI.py:1835 appGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:41
#: appGUI/preferences/geometry/GeometryGenPrefGroupUI.py:42
#: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:40
msgid "Plot (show) this object."
msgstr "Plot (show) this object."

#: appGUI/ObjectUI.py:244
#, fuzzy
#| msgid "Gerber Object"
msgid "Edit an Gerber object."
msgstr "Gerber Object"

#: appGUI/ObjectUI.py:270 appGUI/ObjectUI.py:551
#: appGUI/preferences/excellon/ExcellonAdvOptPrefGroupUI.py:50
#: appGUI/preferences/gerber/GerberAdvOptPrefGroupUI.py:54
#, fuzzy
#| msgid "Toggle the display of axis on canvas"
msgid "Toggle the display of the Tools Table."
msgstr "Toggle the display of axis on canvas"

#: appGUI/ObjectUI.py:279
msgid "Mark All"
msgstr "Mark All"

#: appGUI/ObjectUI.py:281
msgid ""
"When checked it will display all the apertures.\n"
"When unchecked, it will delete all mark shapes\n"
"that are drawn on canvas."
msgstr ""
"When checked it will display all the apertures.\n"
"When unchecked, it will delete all mark shapes\n"
"that are drawn on canvas."

#: appGUI/ObjectUI.py:311
msgid "Mark the aperture instances on canvas."
msgstr "Mark the aperture instances on canvas."

#: appGUI/ObjectUI.py:318 appTools/ToolIsolation.py:3417
msgid "Buffer Solid Geometry"
msgstr "Buffer Solid Geometry"

#: appGUI/ObjectUI.py:320 appTools/ToolIsolation.py:3419
msgid ""
"This button is shown only when the Gerber file\n"
"is loaded without buffering.\n"
"Clicking this will create the buffered geometry\n"
"required for isolation."
msgstr ""
"This button is shown only when the Gerber file\n"
"is loaded without buffering.\n"
"Clicking this will create the buffered geometry\n"
"required for isolation."

#: appGUI/ObjectUI.py:331
msgid "Isolation Routing"
msgstr "Isolation Routing"

#: appGUI/ObjectUI.py:334 appGUI/preferences/tools/ToolsISOPrefGroupUI.py:32
#: appTools/ToolIsolation.py:2927
msgid ""
"Create a Geometry object with\n"
"toolpaths to cut around polygons."
msgstr ""
"Create a Geometry object with\n"
"toolpaths to cut around polygons."

#: appGUI/ObjectUI.py:349 appGUI/ObjectUI.py:1665 appTools/ToolNCC.py:4257
msgid ""
"Create the Geometry Object\n"
"for non-copper routing."
msgstr ""
"Create the Geometry Object\n"
"for non-copper routing."

#: appGUI/ObjectUI.py:364
msgid ""
"Generate the geometry for\n"
"the board cutout."
msgstr ""
"Generate the geometry for\n"
"the board cutout."

#: appGUI/ObjectUI.py:381 appGUI/preferences/gerber/GerberOptPrefGroupUI.py:32
msgid "Non-copper regions"
msgstr "Non-copper regions"

#: appGUI/ObjectUI.py:383 appGUI/preferences/gerber/GerberOptPrefGroupUI.py:34
msgid ""
"Create polygons covering the\n"
"areas without copper on the PCB.\n"
"Equivalent to the inverse of this\n"
"object. Can be used to remove all\n"
"copper from a specified region."
msgstr ""
"Create polygons covering the\n"
"areas without copper on the PCB.\n"
"Equivalent to the inverse of this\n"
"object. Can be used to remove all\n"
"copper from a specified region."

#: appGUI/ObjectUI.py:393 appGUI/ObjectUI.py:434
#: appGUI/preferences/gerber/GerberOptPrefGroupUI.py:46
#: appGUI/preferences/gerber/GerberOptPrefGroupUI.py:79
msgid "Boundary Margin"
msgstr "Boundary Margin"

#: appGUI/ObjectUI.py:395 appGUI/preferences/gerber/GerberOptPrefGroupUI.py:48
msgid ""
"Specify the edge of the PCB\n"
"by drawing a box around all\n"
"objects with this minimum\n"
"distance."
msgstr ""
"Specify the edge of the PCB\n"
"by drawing a box around all\n"
"objects with this minimum\n"
"distance."

#: appGUI/ObjectUI.py:412 appGUI/preferences/gerber/GerberOptPrefGroupUI.py:63
msgid "Resulting geometry will have rounded corners."
msgstr "Resulting geometry will have rounded corners."

#: appGUI/ObjectUI.py:415 appGUI/ObjectUI.py:455 appTools/ToolCutOut.py:2285
#: appTools/ToolCutOut.py:2300 appTools/ToolIsolation.py:3396
#: appTools/ToolNCC.py:4254 appTools/ToolPaint.py:3177
msgid "Generate Geometry"
msgstr "Generate Geometry"

#: appGUI/ObjectUI.py:426 appGUI/preferences/gerber/GerberOptPrefGroupUI.py:73
#: appGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:137
#: appTools/ToolPanelize.py:698 appTools/ToolQRCode.py:783
msgid "Bounding Box"
msgstr "Bounding Box"

#: appGUI/ObjectUI.py:428
msgid ""
"Create a geometry surrounding the Gerber object.\n"
"Square shape."
msgstr ""
"Create a geometry surrounding the Gerber object.\n"
"Square shape."

#: appGUI/ObjectUI.py:436 appGUI/preferences/gerber/GerberOptPrefGroupUI.py:81
msgid ""
"Distance of the edges of the box\n"
"to the nearest polygon."
msgstr ""
"Distance of the edges of the box\n"
"to the nearest polygon."

#: appGUI/ObjectUI.py:449 appGUI/preferences/gerber/GerberOptPrefGroupUI.py:94
msgid ""
"If the bounding box is \n"
"to have rounded corners\n"
"their radius is equal to\n"
"the margin."
msgstr ""
"If the bounding box is \n"
"to have rounded corners\n"
"their radius is equal to\n"
"the margin."

#: appGUI/ObjectUI.py:458
msgid "Generate the Geometry object."
msgstr "Generate the Geometry object."

#: appGUI/ObjectUI.py:485
msgid "Excellon Object"
msgstr "Excellon Object"

#: appGUI/ObjectUI.py:502
msgid "Solid circles."
msgstr "Solid circles."

#: appGUI/ObjectUI.py:531
#, fuzzy
#| msgid "Excellon Object"
msgid "Edit an Excellon object."
msgstr "Excellon Object"

#: appGUI/ObjectUI.py:593 appTools/ToolDrilling.py:2067
#: appTools/ToolMilling.py:1672
msgid ""
"This is the Tool Number.\n"
"When ToolChange is checked, on toolchange event this value\n"
"will be showed as a T1, T2 ... Tn in the Machine Code.\n"
"\n"
"Here the tools are selected for G-code generation."
msgstr ""
"This is the Tool Number.\n"
"When ToolChange is checked, on toolchange event this value\n"
"will be showed as a T1, T2 ... Tn in the Machine Code.\n"
"\n"
"Here the tools are selected for G-code generation."

#: appGUI/ObjectUI.py:598 appGUI/ObjectUI.py:888 appTools/ToolDrilling.py:2072
#: appTools/ToolMilling.py:1677 appTools/ToolPaint.py:2826
msgid ""
"Tool Diameter. It's value (in current FlatCAM units) \n"
"is the cut width into the material."
msgstr ""
"Tool Diameter. It's value (in current FlatCAM units) \n"
"is the cut width into the material."

#: appGUI/ObjectUI.py:601 appTools/ToolDrilling.py:2075
#: appTools/ToolMilling.py:1680
msgid ""
"The number of Drill holes. Holes that are drilled with\n"
"a drill bit."
msgstr ""
"The number of Drill holes. Holes that are drilled with\n"
"a drill bit."

#: appGUI/ObjectUI.py:604 appTools/ToolDrilling.py:2078
#: appTools/ToolMilling.py:1683
msgid ""
"The number of Slot holes. Holes that are created by\n"
"milling them with an endmill bit."
msgstr ""
"The number of Slot holes. Holes that are created by\n"
"milling them with an endmill bit."

#: appGUI/ObjectUI.py:607
#, fuzzy
#| msgid "Set the color of the shape when selected."
msgid "Show the color of the drill holes when using multi-color."
msgstr "Set the color of the shape when selected."

#: appGUI/ObjectUI.py:609
msgid ""
"Toggle display of the drills for the current tool.\n"
"This does not select the tools for G-code generation."
msgstr ""
"Toggle display of the drills for the current tool.\n"
"This does not select the tools for G-code generation."

#: appGUI/ObjectUI.py:618
#: appGUI/preferences/excellon/ExcellonAdvOptPrefGroupUI.py:55
#, fuzzy
#| msgid "Add from DB"
msgid "Auto load from DB"
msgstr "Add from DB"

#: appGUI/ObjectUI.py:620
#: appGUI/preferences/excellon/ExcellonAdvOptPrefGroupUI.py:57
msgid ""
"Automatic replacement of the tools from related application tools\n"
"with tools from DB that have a close diameter value."
msgstr ""

#: appGUI/ObjectUI.py:646
#, fuzzy
#| msgid ""
#| "Merge a selection of Excellon objects into a new combo Excellon object."
msgid "Generate GCode out of drill holes in an Excellon object."
msgstr ""
"Merge a selection of Excellon objects into a new combo Excellon object."

#: appGUI/ObjectUI.py:657
#, fuzzy
#| msgid "Milling Type"
msgid "Milling Tool"
msgstr "Milling Type"

#: appGUI/ObjectUI.py:660
#, fuzzy
#| msgid ""
#| "Merge a selection of Excellon objects into a new combo Excellon object."
msgid "Generate GCode out of slot holes in an Excellon object."
msgstr ""
"Merge a selection of Excellon objects into a new combo Excellon object."

#: appGUI/ObjectUI.py:684
msgid "Milling Geometry"
msgstr "Milling Geometry"

#: appGUI/ObjectUI.py:686
msgid ""
"Create Geometry for milling holes.\n"
"Select from the Tools Table above the hole dias to be\n"
"milled. Use the # column to make the selection."
msgstr ""
"Create Geometry for milling holes.\n"
"Select from the Tools Table above the hole dias to be\n"
"milled. Use the # column to make the selection."

#: appGUI/ObjectUI.py:694
#: appGUI/preferences/excellon/ExcellonOptPrefGroupUI.py:101
msgid "Diameter of the cutting tool."
msgstr "Diameter of the cutting tool."

#: appGUI/ObjectUI.py:704
msgid "Mill Drills"
msgstr "Mill Drills"

#: appGUI/ObjectUI.py:706
msgid ""
"Create the Geometry Object\n"
"for milling DRILLS toolpaths."
msgstr ""
"Create the Geometry Object\n"
"for milling DRILLS toolpaths."

#: appGUI/ObjectUI.py:724
msgid "Mill Slots"
msgstr "Mill Slots"

#: appGUI/ObjectUI.py:726
msgid ""
"Create the Geometry Object\n"
"for milling SLOTS toolpaths."
msgstr ""
"Create the Geometry Object\n"
"for milling SLOTS toolpaths."

#: appGUI/ObjectUI.py:768
msgid "Geometry Object"
msgstr "Geometry Object"

#: appGUI/ObjectUI.py:807
#, fuzzy
#| msgid "Geometry Object"
msgid "Edit an Geometry object."
msgstr "Geometry Object"

#: appGUI/ObjectUI.py:845
msgid ""
"Tools in this Geometry object used for cutting.\n"
"The 'Offset' entry will set an offset for the cut.\n"
"'Offset' can be inside, outside, on path (none) and custom.\n"
"'Type' entry is only informative and it allow to know the \n"
"intent of using the current tool. \n"
"It can be Rough(ing), Finish(ing) or Iso(lation).\n"
"The 'Tool type'(TT) can be circular with 1 to 4 teeths(C1..C4),\n"
"ball(B), or V-Shaped(V). \n"
"When V-shaped is selected the 'Type' entry is automatically \n"
"set to Isolation, the CutZ parameter in the UI form is\n"
"grayed out and Cut Z is automatically calculated from the newly \n"
"showed UI form entries named V-Tip Dia and V-Tip Angle."
msgstr ""
"Tools in this Geometry object used for cutting.\n"
"The 'Offset' entry will set an offset for the cut.\n"
"'Offset' can be inside, outside, on path (none) and custom.\n"
"'Type' entry is only informative and it allow to know the \n"
"intent of using the current tool. \n"
"It can be Rough(ing), Finish(ing) or Iso(lation).\n"
"The 'Tool type'(TT) can be circular with 1 to 4 teeths(C1..C4),\n"
"ball(B), or V-Shaped(V). \n"
"When V-shaped is selected the 'Type' entry is automatically \n"
"set to Isolation, the CutZ parameter in the UI form is\n"
"grayed out and Cut Z is automatically calculated from the newly \n"
"showed UI form entries named V-Tip Dia and V-Tip Angle."

#: appGUI/ObjectUI.py:862 appGUI/ObjectUI.py:1833
#: appGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:40
msgid "Plot Object"
msgstr "Plot Object"

#: appGUI/ObjectUI.py:882
msgid ""
"This is the Tool Number.\n"
"When ToolChange is checked, on toolchange event this value\n"
"will be showed as a T1, T2 ... Tn"
msgstr ""
"This is the Tool Number.\n"
"When ToolChange is checked, on toolchange event this value\n"
"will be showed as a T1, T2 ... Tn"

#: appGUI/ObjectUI.py:893
msgid ""
"The value for the Offset can be:\n"
"- Path -> There is no offset, the tool cut will be done through the geometry "
"line.\n"
"- In(side) -> The tool cut will follow the geometry inside. It will create a "
"'pocket'.\n"
"- Out(side) -> The tool cut will follow the geometry line on the outside."
msgstr ""
"The value for the Offset can be:\n"
"- Path -> There is no offset, the tool cut will be done through the geometry "
"line.\n"
"- In(side) -> The tool cut will follow the geometry inside. It will create a "
"'pocket'.\n"
"- Out(side) -> The tool cut will follow the geometry line on the outside."

#: appGUI/ObjectUI.py:900
msgid ""
"The (Operation) Type has only informative value. Usually the UI form "
"values \n"
"are choose based on the operation type and this will serve as a reminder.\n"
"Can be 'Roughing', 'Finishing' or 'Isolation'.\n"
"For Roughing we may choose a lower Feedrate and multiDepth cut.\n"
"For Finishing we may choose a higher Feedrate, without multiDepth.\n"
"For Isolation we need a lower Feedrate as it use a milling bit with a fine "
"tip."
msgstr ""
"The (Operation) Type has only informative value. Usually the UI form "
"values \n"
"are choose based on the operation type and this will serve as a reminder.\n"
"Can be 'Roughing', 'Finishing' or 'Isolation'.\n"
"For Roughing we may choose a lower Feedrate and multiDepth cut.\n"
"For Finishing we may choose a higher Feedrate, without multiDepth.\n"
"For Isolation we need a lower Feedrate as it use a milling bit with a fine "
"tip."

#: appGUI/ObjectUI.py:909
msgid ""
"The Tool Type (TT) can be:\n"
"- Circular with 1 ... 4 teeth -> it is informative only. Being circular the "
"cut width in material\n"
"is exactly the tool diameter.\n"
"- Ball -> informative only and make reference to the Ball type endmill.\n"
"- V-Shape -> it will disable Z-Cut parameter in the UI form and enable two "
"additional UI form\n"
"fields: V-Tip Dia and V-Tip Angle. Adjusting those two values will adjust "
"the Z-Cut parameter such\n"
"as the cut width into material will be equal with the value in the Tool "
"Diameter column of this table.\n"
"Choosing the V-Shape Tool Type automatically will select the Operation Type "
"as Isolation."
msgstr ""
"The Tool Type (TT) can be:\n"
"- Circular with 1 ... 4 teeth -> it is informative only. Being circular the "
"cut width in material\n"
"is exactly the tool diameter.\n"
"- Ball -> informative only and make reference to the Ball type endmill.\n"
"- V-Shape -> it will disable Z-Cut parameter in the UI form and enable two "
"additional UI form\n"
"fields: V-Tip Dia and V-Tip Angle. Adjusting those two values will adjust "
"the Z-Cut parameter such\n"
"as the cut width into material will be equal with the value in the Tool "
"Diameter column of this table.\n"
"Choosing the V-Shape Tool Type automatically will select the Operation Type "
"as Isolation."

#: appGUI/ObjectUI.py:921
msgid ""
"Plot column. It is visible only for MultiGeo geometries, meaning geometries "
"that holds the geometry\n"
"data into the tools. For those geometries, deleting the tool will delete the "
"geometry data also,\n"
"so be WARNED. From the checkboxes on each row it can be enabled/disabled the "
"plot on canvas\n"
"for the corresponding tool."
msgstr ""
"Plot column. It is visible only for MultiGeo geometries, meaning geometries "
"that holds the geometry\n"
"data into the tools. For those geometries, deleting the tool will delete the "
"geometry data also,\n"
"so be WARNED. From the checkboxes on each row it can be enabled/disabled the "
"plot on canvas\n"
"for the corresponding tool."

#: appGUI/ObjectUI.py:936
msgid ""
"The value to offset the cut when \n"
"the Offset type selected is 'Offset'.\n"
"The value can be positive for 'outside'\n"
"cut and negative for 'inside' cut."
msgstr ""
"The value to offset the cut when \n"
"the Offset type selected is 'Offset'.\n"
"The value can be positive for 'outside'\n"
"cut and negative for 'inside' cut."

#: appGUI/ObjectUI.py:955 appTools/ToolIsolation.py:3049 appTools/ToolNCC.py:66
#: appTools/ToolNCC.py:3854 appTools/ToolPaint.py:140
#: appTools/ToolPaint.py:2877
msgid "Add from DB"
msgstr "Add from DB"

#: appGUI/ObjectUI.py:972 appTools/ToolCutOut.py:2069
#: appTools/ToolIsolation.py:61 appTools/ToolIsolation.py:3084
#: appTools/ToolNCC.py:3888 appTools/ToolPaint.py:2897
msgid "Search and Add"
msgstr ""

#: appGUI/ObjectUI.py:975
msgid ""
"Add a new tool to the Tool Table\n"
"with the diameter specified above."
msgstr ""
"Add a new tool to the Tool Table\n"
"with the diameter specified above."

#: appGUI/ObjectUI.py:979 appTools/ToolCutOut.py:2081
#: appTools/ToolIsolation.py:65 appTools/ToolIsolation.py:3095
#: appTools/ToolNCC.py:3899 appTools/ToolPaint.py:2908
#, fuzzy
#| msgid "Add from DB"
msgid "Pick from DB"
msgstr "Add from DB"

#: appGUI/ObjectUI.py:982 appTools/ToolCutOut.py:2084
#: appTools/ToolIsolation.py:3098 appTools/ToolNCC.py:3902
#: appTools/ToolPaint.py:2911
#, fuzzy
#| msgid ""
#| "Add a new tool to the Tool Table\n"
#| "from the Tool DataBase."
msgid ""
"Add a new tool to the Tool Table\n"
"from the Tools Database.\n"
"Tools database administration in in:\n"
"Menu: Options -> Tools Database"
msgstr ""
"Add a new tool to the Tool Table\n"
"from the Tool DataBase."

#: appGUI/ObjectUI.py:1004
msgid ""
"Copy a selection of tools in the Tool Table\n"
"by first selecting a row in the Tool Table."
msgstr ""
"Copy a selection of tools in the Tool Table\n"
"by first selecting a row in the Tool Table."

#: appGUI/ObjectUI.py:1011
msgid ""
"Delete a selection of tools in the Tool Table\n"
"by first selecting a row in the Tool Table."
msgstr ""
"Delete a selection of tools in the Tool Table\n"
"by first selecting a row in the Tool Table."

#: appGUI/ObjectUI.py:1048 appObjects/FlatCAMGeometry.py:388
#: appObjects/FlatCAMGeometry.py:826 appObjects/FlatCAMGeometry.py:831
#: appObjects/FlatCAMGeometry.py:865 appObjects/FlatCAMGeometry.py:890
#: appObjects/FlatCAMGeometry.py:894 appTools/ToolDrilling.py:705
#: appTools/ToolDrilling.py:711 appTools/ToolDrilling.py:754
#: appTools/ToolDrilling.py:983 appTools/ToolDrilling.py:990
#: appTools/ToolDrilling.py:1021 appTools/ToolDrilling.py:1033
#: appTools/ToolDrilling.py:1037 appTools/ToolDrilling.py:2116
#: appTools/ToolIsolation.py:525 appTools/ToolIsolation.py:633
#: appTools/ToolIsolation.py:638 appTools/ToolIsolation.py:668
#: appTools/ToolIsolation.py:691 appTools/ToolIsolation.py:704
#: appTools/ToolIsolation.py:3128 appTools/ToolMilling.py:628
#: appTools/ToolMilling.py:744 appTools/ToolMilling.py:749
#: appTools/ToolMilling.py:779 appTools/ToolMilling.py:790
#: appTools/ToolMilling.py:794 appTools/ToolMilling.py:1711
#: appTools/ToolNCC.py:266 appTools/ToolNCC.py:271 appTools/ToolNCC.py:301
#: appTools/ToolNCC.py:324 appTools/ToolNCC.py:337 appTools/ToolNCC.py:700
#: appTools/ToolNCC.py:3932 appTools/ToolPaint.py:247 appTools/ToolPaint.py:252
#: appTools/ToolPaint.py:282 appTools/ToolPaint.py:304
#: appTools/ToolPaint.py:316 appTools/ToolPaint.py:654
#: appTools/ToolPaint.py:2939
msgid "Parameters for"
msgstr "Parameters for"

#: appGUI/ObjectUI.py:1051 appTools/ToolDrilling.py:2119
#: appTools/ToolIsolation.py:3131 appTools/ToolMilling.py:1714
#: appTools/ToolNCC.py:3935 appTools/ToolPaint.py:2942
msgid ""
"The data used for creating GCode.\n"
"Each tool store it's own set of such data."
msgstr ""
"The data used for creating GCode.\n"
"Each tool store it's own set of such data."

#: appGUI/ObjectUI.py:1058 appGUI/preferences/tools/ToolsISOPrefGroupUI.py:89
#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:72
#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:78
#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:85
msgid "V-Tip Dia"
msgstr "V-Tip Dia"

#: appGUI/ObjectUI.py:1061 appGUI/preferences/tools/ToolsISOPrefGroupUI.py:91
#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:74
#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:80
msgid "The tip diameter for V-Shape Tool"
msgstr "The tip diameter for V-Shape Tool"

#: appGUI/ObjectUI.py:1073 appGUI/preferences/tools/ToolsISOPrefGroupUI.py:101
#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:84
#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:91
#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:99
msgid "V-Tip Angle"
msgstr "V-Tip Angle"

#: appGUI/ObjectUI.py:1076 appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:86
#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:93
msgid ""
"The tip angle for V-Shape Tool.\n"
"In degree."
msgstr ""
"The tip angle for V-Shape Tool.\n"
"In degree."

#: appGUI/ObjectUI.py:1092
#: appGUI/preferences/geometry/GeometryOptPrefGroupUI.py:51
#: appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:61
#: appObjects/FlatCAMGeometry.py:1314 appTools/ToolCutOut.py:2105
msgid ""
"Cutting depth (negative)\n"
"below the copper surface."
msgstr ""
"Cutting depth (negative)\n"
"below the copper surface."

#: appGUI/ObjectUI.py:1110
#: appGUI/preferences/geometry/GeometryOptPrefGroupUI.py:69
#: appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:79
#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:77
#: appTools/ToolCutOut.py:2123 appTools/ToolDrilling.py:2164
#: appTools/ToolMilling.py:1814
msgid "Multi-Depth"
msgstr "Multi-Depth"

#: appGUI/ObjectUI.py:1138
#: appGUI/preferences/geometry/GeometryOptPrefGroupUI.py:104
msgid ""
"Height of the tool when\n"
"moving without cutting."
msgstr ""
"Height of the tool when\n"
"moving without cutting."

#: appGUI/ObjectUI.py:1157
#: appGUI/preferences/geometry/GeometryOptPrefGroupUI.py:188
#: appTools/ToolMilling.py:1862
msgid ""
"Cutting speed in the XY\n"
"plane in units per minute"
msgstr ""
"Cutting speed in the XY\n"
"plane in units per minute"

#: appGUI/ObjectUI.py:1171
#: appGUI/preferences/geometry/GeometryOptPrefGroupUI.py:203
msgid ""
"Cutting speed in the XY\n"
"plane in units per minute.\n"
"It is called also Plunge."
msgstr ""
"Cutting speed in the XY\n"
"plane in units per minute.\n"
"It is called also Plunge."

#: appGUI/ObjectUI.py:1186
#: appGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:69
msgid ""
"Cutting speed in the XY plane\n"
"(in units per minute).\n"
"This is for the rapid move G00.\n"
"It is useful only for Marlin,\n"
"ignore for any other cases."
msgstr ""
"Cutting speed in the XY plane\n"
"(in units per minute).\n"
"This is for the rapid move G00.\n"
"It is useful only for Marlin,\n"
"ignore for any other cases."

#: appGUI/ObjectUI.py:1204
#: appGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:85
#: appTools/ToolMilling.py:1914
msgid "Re-cut"
msgstr "Re-cut"

#: appGUI/ObjectUI.py:1206 appGUI/ObjectUI.py:1218
#: appGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:87
#: appGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:99
#: appTools/ToolMilling.py:1916 appTools/ToolMilling.py:1929
msgid ""
"In order to remove possible\n"
"copper leftovers where first cut\n"
"meet with last cut, we generate an\n"
"extended cut over the first cut section."
msgstr ""
"In order to remove possible\n"
"copper leftovers where first cut\n"
"meet with last cut, we generate an\n"
"extended cut over the first cut section."

#: appGUI/ObjectUI.py:1230
#: appGUI/preferences/geometry/GeometryOptPrefGroupUI.py:220
msgid ""
"Speed of the spindle in RPM (optional).\n"
"If LASER preprocessor is used,\n"
"this value is the power of laser."
msgstr ""
"Speed of the spindle in RPM (optional).\n"
"If LASER preprocessor is used,\n"
"this value is the power of laser."

#: appGUI/ObjectUI.py:1246
#: appGUI/preferences/geometry/GeometryOptPrefGroupUI.py:235
#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:202
#: appTools/ToolDrilling.py:2266 appTools/ToolMilling.py:1959
msgid ""
"Pause to allow the spindle to reach its\n"
"speed before cutting."
msgstr ""
"Pause to allow the spindle to reach its\n"
"speed before cutting."

#: appGUI/ObjectUI.py:1256
#: appGUI/preferences/geometry/GeometryOptPrefGroupUI.py:240
#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:210
#: appTools/ToolDrilling.py:2278 appTools/ToolMilling.py:1970
msgid "Number of time units for spindle to dwell."
msgstr "Number of time units for spindle to dwell."

#: appGUI/ObjectUI.py:1264 appGUI/ObjectUI.py:1965
#: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:131
#: appGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:108
#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:333
#: appTools/ToolDrilling.py:2461 appTools/ToolMilling.py:2129
msgid "Probe Z depth"
msgstr "Probe Z depth"

#: appGUI/ObjectUI.py:1266 appGUI/ObjectUI.py:1967
#: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:133
#: appGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:110
#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:335
#: appTools/ToolDrilling.py:2463 appTools/ToolMilling.py:2131
msgid ""
"The maximum depth that the probe is allowed\n"
"to probe. Negative value, in current units."
msgstr ""
"The maximum depth that the probe is allowed\n"
"to probe. Negative value, in current units."

#: appGUI/ObjectUI.py:1281
#: appGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:123
#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:346
#: appTools/ToolDrilling.py:2480 appTools/ToolMilling.py:2148
msgid "Feedrate Probe"
msgstr "Feedrate Probe"

#: appGUI/ObjectUI.py:1283 appGUI/ObjectUI.py:1980
#: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:146
#: appGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:125
#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:348
#: appTools/ToolDrilling.py:2482 appTools/ToolMilling.py:2150
msgid "The feedrate used while the probe is probing."
msgstr "The feedrate used while the probe is probing."

#: appGUI/ObjectUI.py:1310 appTools/ToolDrilling.py:2364
#: appTools/ToolIsolation.py:3227 appTools/ToolMilling.py:2042
#: appTools/ToolNCC.py:4093 appTools/ToolPaint.py:3048
msgid "Apply parameters to all tools"
msgstr "Apply parameters to all tools"

#: appGUI/ObjectUI.py:1313 appTools/ToolDrilling.py:2367
#: appTools/ToolIsolation.py:3230 appTools/ToolMilling.py:2045
#: appTools/ToolNCC.py:4096 appTools/ToolPaint.py:3051
msgid ""
"The parameters in the current form will be applied\n"
"on all the tools from the Tool Table."
msgstr ""
"The parameters in the current form will be applied\n"
"on all the tools from the Tool Table."

#: appGUI/ObjectUI.py:1324 appTools/ToolDrilling.py:2378
#: appTools/ToolIsolation.py:3241 appTools/ToolMilling.py:2056
#: appTools/ToolNCC.py:4107 appTools/ToolPaint.py:3062
msgid "Common Parameters"
msgstr "Common Parameters"

#: appGUI/ObjectUI.py:1326 appTools/ToolDrilling.py:2380
#: appTools/ToolIsolation.py:3243 appTools/ToolMilling.py:2058
#: appTools/ToolNCC.py:4109 appTools/ToolPaint.py:3064
msgid "Parameters that are common for all tools."
msgstr "Parameters that are common for all tools."

#: appGUI/ObjectUI.py:1331 appTools/ToolDrilling.py:2394
#: appTools/ToolMilling.py:2063
msgid "Tool change Z"
msgstr "Tool change Z"

#: appGUI/ObjectUI.py:1334
#: appGUI/preferences/geometry/GeometryOptPrefGroupUI.py:125
msgid ""
"Include tool-change sequence\n"
"in the Machine Code (Pause for tool change)."
msgstr ""
"Include tool-change sequence\n"
"in the Machine Code (Pause for tool change)."

#: appGUI/ObjectUI.py:1342
#: appGUI/preferences/geometry/GeometryOptPrefGroupUI.py:135
#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:126
#: appTools/ToolDrilling.py:2396 appTools/ToolMilling.py:2072
msgid ""
"Z-axis position (height) for\n"
"tool change."
msgstr ""
"Z-axis position (height) for\n"
"tool change."

#: appGUI/ObjectUI.py:1370
#: appGUI/preferences/geometry/GeometryOptPrefGroupUI.py:154
#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:142
#: appTools/ToolDrilling.py:2427 appTools/ToolMilling.py:2098
msgid "End move Z"
msgstr "End move Z"

#: appGUI/ObjectUI.py:1372
#: appGUI/preferences/geometry/GeometryOptPrefGroupUI.py:156
#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:144
#: appTools/ToolDrilling.py:2429 appTools/ToolMilling.py:2100
msgid ""
"Height of the tool after\n"
"the last move at the end of the job."
msgstr ""
"Height of the tool after\n"
"the last move at the end of the job."

#: appGUI/ObjectUI.py:1389
#: appGUI/preferences/geometry/GeometryOptPrefGroupUI.py:174
#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:159
#: appTools/ToolDrilling.py:2447 appTools/ToolMilling.py:2117
msgid "End move X,Y"
msgstr "End move X,Y"

#: appGUI/ObjectUI.py:1391
#: appGUI/preferences/geometry/GeometryOptPrefGroupUI.py:176
#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:161
#: appTools/ToolDrilling.py:2449 appTools/ToolMilling.py:2119
msgid ""
"End move X,Y position. In format (x,y).\n"
"If no value is entered then there is no move\n"
"on X,Y plane at the end of the job."
msgstr ""
"End move X,Y position. In format (x,y).\n"
"If no value is entered then there is no move\n"
"on X,Y plane at the end of the job."

#: appGUI/ObjectUI.py:1396 appTools/ToolDrilling.py:2454
#: appTools/ToolMilling.py:2124
#, fuzzy
#| msgid "Coordinates"
msgid "X,Y coordinates"
msgstr "Coordinates"

#: appGUI/ObjectUI.py:1404
#: appGUI/preferences/geometry/GeometryOptPrefGroupUI.py:257
msgid ""
"The Preprocessor file that dictates\n"
"the Machine Code (like GCode, RML, HPGL) output."
msgstr ""
"The Preprocessor file that dictates\n"
"the Machine Code (like GCode, RML, HPGL) output."

#: appGUI/ObjectUI.py:1420 appTools/ToolDrilling.py:2515
#: appTools/ToolMilling.py:2194
msgid "Add exclusion areas"
msgstr "Add exclusion areas"

#: appGUI/ObjectUI.py:1423
#: appGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:212
#: appTools/ToolDrilling.py:2518 appTools/ToolMilling.py:2197
msgid ""
"Include exclusion areas.\n"
"In those areas the travel of the tools\n"
"is forbidden."
msgstr ""
"Include exclusion areas.\n"
"In those areas the travel of the tools\n"
"is forbidden."

#: appGUI/ObjectUI.py:1444 appGUI/ObjectUI.py:1463
#: appGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:232
#: appTools/ToolDrilling.py:2540 appTools/ToolDrilling.py:2559
#: appTools/ToolMilling.py:2218 appTools/ToolMilling.py:2237
msgid "Strategy"
msgstr "Strategy"

#: appGUI/ObjectUI.py:1444 appGUI/ObjectUI.py:1475
#: appGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:244
#: appTools/ToolDrilling.py:2540 appTools/ToolDrilling.py:2572
#: appTools/ToolMilling.py:2218 appTools/ToolMilling.py:2249
msgid "Over Z"
msgstr "Over Z"

#: appGUI/ObjectUI.py:1446 appTools/ToolDrilling.py:2542
#: appTools/ToolMilling.py:2220
msgid "This is the Area ID."
msgstr "This is the Area ID."

#: appGUI/ObjectUI.py:1448 appTools/ToolDrilling.py:2544
#: appTools/ToolMilling.py:2222
msgid "Type of the object where the exclusion area was added."
msgstr "Type of the object where the exclusion area was added."

#: appGUI/ObjectUI.py:1450 appTools/ToolDrilling.py:2546
#: appTools/ToolMilling.py:2224
msgid ""
"The strategy used for exclusion area. Go around the exclusion areas or over "
"it."
msgstr ""
"The strategy used for exclusion area. Go around the exclusion areas or over "
"it."

#: appGUI/ObjectUI.py:1452 appTools/ToolDrilling.py:2548
#: appTools/ToolMilling.py:2226
msgid ""
"If the strategy is to go over the area then this is the height at which the "
"tool will go to avoid the exclusion area."
msgstr ""
"If the strategy is to go over the area then this is the height at which the "
"tool will go to avoid the exclusion area."

#: appGUI/ObjectUI.py:1464
#: appGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:233
#: appTools/ToolDrilling.py:2560 appTools/ToolMilling.py:2238
msgid ""
"The strategy followed when encountering an exclusion area.\n"
"Can be:\n"
"- Over -> when encountering the area, the tool will go to a set height\n"
"- Around -> will avoid the exclusion area by going around the area"
msgstr ""
"The strategy followed when encountering an exclusion area.\n"
"Can be:\n"
"- Over -> when encountering the area, the tool will go to a set height\n"
"- Around -> will avoid the exclusion area by going around the area"

#: appGUI/ObjectUI.py:1468
#: appGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:237
#: appTools/ToolDrilling.py:2564 appTools/ToolMilling.py:2242
msgid "Over"
msgstr "Over"

#: appGUI/ObjectUI.py:1469
#: appGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:238
#: appTools/ToolDrilling.py:2565 appTools/ToolMilling.py:2243
msgid "Around"
msgstr "Around"

#: appGUI/ObjectUI.py:1476
#: appGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:245
#: appTools/ToolDrilling.py:2573 appTools/ToolMilling.py:2250
msgid ""
"The height Z to which the tool will rise in order to avoid\n"
"an interdiction area."
msgstr ""
"The height Z to which the tool will rise in order to avoid\n"
"an interdiction area."

#: appGUI/ObjectUI.py:1486 appTools/ToolDrilling.py:2584
#: appTools/ToolMilling.py:2260
msgid "Add area:"
msgstr "Add area:"

#: appGUI/ObjectUI.py:1487 appTools/ToolDrilling.py:2585
#: appTools/ToolMilling.py:2261
msgid "Add an Exclusion Area."
msgstr "Add an Exclusion Area."

#: appGUI/ObjectUI.py:1493
#: appGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:222
#: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:295
#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:324
#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:288
#: appTools/ToolDrilling.py:2591 appTools/ToolIsolation.py:3379
#: appTools/ToolMilling.py:2267 appTools/ToolNCC.py:4237
#: appTools/ToolPaint.py:3164
msgid "The kind of selection shape used for area selection."
msgstr "The kind of selection shape used for area selection."

#: appGUI/ObjectUI.py:1503
#: appGUI/preferences/utilities/AutoCompletePrefGroupUI.py:32
#: appGUI/preferences/utilities/FAExcPrefGroupUI.py:42
#: appGUI/preferences/utilities/FAGcoPrefGroupUI.py:32
#: appGUI/preferences/utilities/FAGrbPrefGroupUI.py:32
#: appTools/ToolDrilling.py:2602 appTools/ToolMilling.py:2277
msgid "Delete All"
msgstr "Delete All"

#: appGUI/ObjectUI.py:1504 appTools/ToolDrilling.py:2603
#: appTools/ToolMilling.py:2278
msgid "Delete all exclusion areas."
msgstr "Delete all exclusion areas."

#: appGUI/ObjectUI.py:1507 appTools/ToolDrilling.py:2606
#: appTools/ToolMilling.py:2281
msgid "Delete Selected"
msgstr "Delete Selected"

#: appGUI/ObjectUI.py:1508 appTools/ToolDrilling.py:2607
#: appTools/ToolMilling.py:2282
msgid "Delete all exclusion areas that are selected in the table."
msgstr "Delete all exclusion areas that are selected in the table."

#: appGUI/ObjectUI.py:1518
#, fuzzy
#| msgid "Add Polygon"
msgid "Add Polish"
msgstr "Add Polygon"

#: appGUI/ObjectUI.py:1520
msgid ""
"Will add a Paint section at the end of the GCode.\n"
"A metallic brush will clean the material after milling."
msgstr ""

#: appGUI/ObjectUI.py:1528
#, fuzzy
#| msgid "Diameter for the new tool."
msgid "Diameter for the polishing tool."
msgstr "Diameter for the new tool."

#: appGUI/ObjectUI.py:1539
#, fuzzy
#| msgid "Measure"
msgid "Pressure"
msgstr "Measure"

#: appGUI/ObjectUI.py:1541
msgid ""
"Negative value. The higher the absolute value\n"
"the stronger the pressure of the brush on the material."
msgstr ""

#: appGUI/ObjectUI.py:1570
#, fuzzy
#| msgid ""
#| "Algorithm for copper clearing:\n"
#| "- Standard: Fixed step inwards.\n"
#| "- Seed-based: Outwards from seed.\n"
#| "- Line-based: Parallel lines."
msgid ""
"Algorithm for polishing:\n"
"- Standard: Fixed step inwards.\n"
"- Seed-based: Outwards from seed.\n"
"- Line-based: Parallel lines."
msgstr ""
"Algorithm for copper clearing:\n"
"- Standard: Fixed step inwards.\n"
"- Seed-based: Outwards from seed.\n"
"- Line-based: Parallel lines."

#: appGUI/ObjectUI.py:1614 appTools/ToolDrilling.py:2629
#: appTools/ToolMilling.py:2304
msgid "Generate CNCJob object"
msgstr "Generate CNCJob object"

#: appGUI/ObjectUI.py:1617
#, fuzzy
#| msgid "Generate CNCJob object"
msgid "Generate CNCJob object."
msgstr "Generate CNCJob object"

#: appGUI/ObjectUI.py:1619
msgid ""
"Add / Select at least one tool in the tool-table.\n"
"Click the # header to select all, or Ctrl + LMB\n"
"for custom selection of tools."
msgstr ""
"Add / Select at least one tool in the tool-table.\n"
"Click the # header to select all, or Ctrl + LMB\n"
"for custom selection of tools."

#: appGUI/ObjectUI.py:1638
msgid "Launch Paint Tool in Tools Tab."
msgstr "Launch Paint Tool in Tools Tab."

#: appGUI/ObjectUI.py:1647 appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:35
msgid ""
"Creates tool paths to cover the\n"
"whole area of a polygon (remove\n"
"all copper). You will be asked\n"
"to click on the desired polygon."
msgstr ""
"Creates tool paths to cover the\n"
"whole area of a polygon (remove\n"
"all copper). You will be asked\n"
"to click on the desired polygon."

#: appGUI/ObjectUI.py:1703
msgid "CNC Job Object"
msgstr "CNC Job Object"

#: appGUI/ObjectUI.py:1719 appGUI/preferences/cncjob/CNCJobOptPrefGroupUI.py:54
msgid ""
"This selects the kind of geometries on the canvas to plot.\n"
"Those can be either of type 'Travel' which means the moves\n"
"above the work piece or it can be of type 'Cut',\n"
"which means the moves that cut into the material."
msgstr ""
"This selects the kind of geometries on the canvas to plot.\n"
"Those can be either of type 'Travel' which means the moves\n"
"above the work piece or it can be of type 'Cut',\n"
"which means the moves that cut into the material."

#: appGUI/ObjectUI.py:1728 appGUI/preferences/cncjob/CNCJobOptPrefGroupUI.py:62
msgid "Travel"
msgstr "Travel"

#: appGUI/ObjectUI.py:1751
#, fuzzy
#| msgid "Create the QRCode object."
msgid "Edit an GCode object."
msgstr "Create the QRCode object."

#: appGUI/ObjectUI.py:1762 appGUI/preferences/cncjob/CNCJobOptPrefGroupUI.py:71
msgid "Display Annotation"
msgstr "Display Annotation"

#: appGUI/ObjectUI.py:1764 appGUI/preferences/cncjob/CNCJobOptPrefGroupUI.py:73
msgid ""
"This selects if to display text annotation on the plot.\n"
"When checked it will display numbers in order for each end\n"
"of a travel line."
msgstr ""
"This selects if to display text annotation on the plot.\n"
"When checked it will display numbers in order for each end\n"
"of a travel line."

#: appGUI/ObjectUI.py:1776 appTools/ToolProperties.py:562
msgid "Travelled distance"
msgstr "Travelled distance"

#: appGUI/ObjectUI.py:1778
msgid ""
"This is the total travelled distance on X-Y plane.\n"
"In current units."
msgstr ""
"This is the total travelled distance on X-Y plane.\n"
"In current units."

#: appGUI/ObjectUI.py:1789
msgid "Estimated time"
msgstr "Estimated time"

#: appGUI/ObjectUI.py:1791
msgid ""
"This is the estimated time to do the routing/drilling,\n"
"without the time spent in ToolChange events."
msgstr ""
"This is the estimated time to do the routing/drilling,\n"
"without the time spent in ToolChange events."

#: appGUI/ObjectUI.py:1815
msgid "CNC Tools Table"
msgstr "CNC Tools Table"

#: appGUI/ObjectUI.py:1818
msgid ""
"Tools in this CNCJob object used for cutting.\n"
"The tool diameter is used for plotting on canvas.\n"
"The 'Offset' entry will set an offset for the cut.\n"
"'Offset' can be inside, outside, on path (none) and custom.\n"
"'Type' entry is only informative and it allow to know the \n"
"intent of using the current tool. \n"
"It can be Rough(ing), Finish(ing) or Iso(lation).\n"
"The 'Tool type'(TT) can be circular with 1 to 4 teeths(C1..C4),\n"
"ball(B), or V-Shaped(V)."
msgstr ""
"Tools in this CNCJob object used for cutting.\n"
"The tool diameter is used for plotting on canvas.\n"
"The 'Offset' entry will set an offset for the cut.\n"
"'Offset' can be inside, outside, on path (none) and custom.\n"
"'Type' entry is only informative and it allow to know the \n"
"intent of using the current tool. \n"
"It can be Rough(ing), Finish(ing) or Iso(lation).\n"
"The 'Tool type'(TT) can be circular with 1 to 4 teeths(C1..C4),\n"
"ball(B), or V-Shaped(V)."

#: appGUI/ObjectUI.py:1846 appGUI/ObjectUI.py:1857
msgid "P"
msgstr "P"

#: appGUI/ObjectUI.py:1867
msgid "Update Plot"
msgstr "Update Plot"

#: appGUI/ObjectUI.py:1869
msgid "Update the plot."
msgstr "Update the plot."

#: appGUI/ObjectUI.py:1879
msgid "Use CNC Code Snippets"
msgstr ""

#: appGUI/ObjectUI.py:1881
msgid ""
"When selected, it will include CNC Code snippets (append and prepend)\n"
"defined in the Preferences."
msgstr ""

#: appGUI/ObjectUI.py:1887
#: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:64
msgid "Autolevelling"
msgstr ""

#: appGUI/ObjectUI.py:1889
msgid "Enable the autolevelling feature."
msgstr ""

#: appGUI/ObjectUI.py:1906
#, fuzzy
#| msgid "Tools Table"
msgid "Probe Points Table"
msgstr "Tools Table"

#: appGUI/ObjectUI.py:1907
msgid "Generate GCode that will obtain the height map"
msgstr ""

#: appGUI/ObjectUI.py:1909
msgid "Show"
msgstr ""

#: appGUI/ObjectUI.py:1910
#, fuzzy
#| msgid "Toggle the display of axis on canvas"
msgid "Toggle the display of the Probe Points table."
msgstr "Toggle the display of axis on canvas"

#: appGUI/ObjectUI.py:1923
#, fuzzy
#| msgid "Coordinates"
msgid "X-Y Coordinates"
msgstr "Coordinates"

#: appGUI/ObjectUI.py:1923
#, fuzzy
#| msgid "Light"
msgid "Height"
msgstr "Light"

#: appGUI/ObjectUI.py:1927
#, fuzzy
#| msgid "Plot Options"
msgid "Plot probing points"
msgstr "Plot Options"

#: appGUI/ObjectUI.py:1929
msgid ""
"Plot the probing points in the table.\n"
"If a Voronoi method is used then\n"
"the Voronoi areas are also plotted."
msgstr ""

#: appGUI/ObjectUI.py:1944
#, fuzzy
#| msgid "Finished G-Code generation"
msgid "Probe GCode Generation"
msgstr "Finished G-Code generation"

#: appGUI/ObjectUI.py:1946
msgid ""
"Will create a GCode which will be sent to the controller,\n"
"either through a file or directly, with the intent to get the height map\n"
"that is to modify the original GCode to level the cutting height."
msgstr ""

#: appGUI/ObjectUI.py:1953
#: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:119
#, fuzzy
#| msgid "Probe Z depth"
msgid "Probe Z travel"
msgstr "Probe Z depth"

#: appGUI/ObjectUI.py:1955
#: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:121
#, fuzzy
#| msgid "Height (Z) for travelling between the points."
msgid "The safe Z for probe travelling between probe points."
msgstr "Height (Z) for travelling between the points."

#: appGUI/ObjectUI.py:1978
#: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:144
#, fuzzy
#| msgid "Feedrate"
msgid "Probe Feedrate"
msgstr "Feedrate"

#: appGUI/ObjectUI.py:1995
#: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:71
#, fuzzy
#| msgid "Mode:"
msgid "Mode"
msgstr "Mode:"

#: appGUI/ObjectUI.py:1996
#: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:72
msgid ""
"Choose a mode for height map generation.\n"
"- Manual: will pick a selection of probe points by clicking on canvas\n"
"- Grid: will automatically generate a grid of probe points"
msgstr ""

#: appGUI/ObjectUI.py:2002
#: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:78
#: appGUI/preferences/tools/Tools2FiducialsPrefGroupUI.py:74
#: appTools/ToolCutOut.py:2322 appTools/ToolFiducials.py:801
msgid "Manual"
msgstr "Manual"

#: appGUI/ObjectUI.py:2003
#: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:79
#, fuzzy
#| msgid "Grids"
msgid "Grid"
msgstr "Grids"

#: appGUI/ObjectUI.py:2010
#: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:86
msgid ""
"Choose a method for approximation of heights from autolevelling data.\n"
"- Voronoi: will generate a Voronoi diagram\n"
"- Bilinear: will use bilinear interpolation. Usable only for grid mode."
msgstr ""

#: appGUI/ObjectUI.py:2016
#: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:92
msgid "Voronoi"
msgstr ""

#: appGUI/ObjectUI.py:2017
#: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:93
#, fuzzy
#| msgid "Linear"
msgid "Bilinear"
msgstr "Linear"

#: appGUI/ObjectUI.py:2030
#: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:101
#: appGUI/preferences/tools/ToolsPanelizePrefGroupUI.py:77
#: appTools/ToolPanelize.py:787
msgid "Columns"
msgstr "Columns"

#: appGUI/ObjectUI.py:2032
#: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:103
msgid "The number of grid columns."
msgstr ""

#: appGUI/ObjectUI.py:2041
#: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:111
#: appGUI/preferences/tools/ToolsPanelizePrefGroupUI.py:89
#: appTools/ToolPanelize.py:797
msgid "Rows"
msgstr "Rows"

#: appGUI/ObjectUI.py:2043
#: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:113
msgid "The number of gird rows."
msgstr ""

#: appGUI/ObjectUI.py:2048
#, fuzzy
#| msgid "Get Points"
msgid "Add Probe Points"
msgstr "Get Points"

#: appGUI/ObjectUI.py:2056
#: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:160
#, fuzzy
#| msgid "Contour"
msgid "Controller"
msgstr "Contour"

#: appGUI/ObjectUI.py:2058
#: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:162
msgid ""
"The kind of controller for which to generate\n"
"height map gcode."
msgstr ""

#: appGUI/ObjectUI.py:2104 appGUI/ObjectUI.py:2119
#: appObjects/FlatCAMCNCJob.py:1273 appObjects/FlatCAMCNCJob.py:1295
#, fuzzy
#| msgid "Contour"
msgid "Control"
msgstr "Contour"

#: appGUI/ObjectUI.py:2114 appGUI/ObjectUI.py:2121
#: appObjects/FlatCAMCNCJob.py:1275 appObjects/FlatCAMCNCJob.py:1297
#, fuzzy
#| msgid "Rendered"
msgid "Sender"
msgstr "Rendered"

#: appGUI/ObjectUI.py:2135
msgid "COM list"
msgstr ""

#: appGUI/ObjectUI.py:2137 appGUI/ObjectUI.py:2152
msgid "Lists the available serial ports."
msgstr ""

#: appGUI/ObjectUI.py:2141
msgid "Search"
msgstr ""

#: appGUI/ObjectUI.py:2143
msgid "Search for the available serial ports."
msgstr ""

#: appGUI/ObjectUI.py:2150
msgid "Baud rates"
msgstr ""

#: appGUI/ObjectUI.py:2169
msgid "New, custom baudrate."
msgstr ""

#: appGUI/ObjectUI.py:2177
msgid "Add the specified custom baudrate to the list."
msgstr ""

#: appGUI/ObjectUI.py:2183
#, fuzzy
#| msgid "Delete Selected"
msgid "Delete selected baudrate"
msgstr "Delete Selected"

#: appGUI/ObjectUI.py:2187
msgid "Reset"
msgstr "Reset"

#: appGUI/ObjectUI.py:2189
msgid "Software reset of the controller."
msgstr ""

#: appGUI/ObjectUI.py:2195 appObjects/FlatCAMCNCJob.py:1289
#, fuzzy
#| msgid "Connect"
msgid "Disconnected"
msgstr "Connect"

#: appGUI/ObjectUI.py:2197
#, fuzzy
#| msgid ""
#| "Create a Gerber object from the selected object, within\n"
#| "the specified box."
msgid "Connect to the selected port with the selected baud rate."
msgstr ""
"Create a Gerber object from the selected object, within\n"
"the specified box."

#: appGUI/ObjectUI.py:2222
msgid "Jog"
msgstr ""

#: appGUI/ObjectUI.py:2230
#, fuzzy
#| msgid "Zeros"
msgid "Zero Axes"
msgstr "Zeros"

#: appGUI/ObjectUI.py:2263
msgid "Pause/Resume"
msgstr ""

#: appGUI/ObjectUI.py:2285
#: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:172
msgid "Step"
msgstr ""

#: appGUI/ObjectUI.py:2287
#: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:174
msgid "Each jog action will move the axes with this value."
msgstr ""

#: appGUI/ObjectUI.py:2299
#: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:185
#: appGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:89
#: appTools/ToolProperties.py:529
msgid "Feedrate"
msgstr "Feedrate"

#: appGUI/ObjectUI.py:2301
#: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:187
msgid "Feedrate when jogging."
msgstr ""

#: appGUI/ObjectUI.py:2321
msgid "Send Command"
msgstr ""

#: appGUI/ObjectUI.py:2323 appGUI/ObjectUI.py:2333
msgid "Send a custom command to GRBL."
msgstr ""

#: appGUI/ObjectUI.py:2328
msgid "Type GRBL command ..."
msgstr ""

#: appGUI/ObjectUI.py:2331
msgid "Send"
msgstr ""

#: appGUI/ObjectUI.py:2339
#, fuzzy
#| msgid "Text to PDF parameters"
msgid "Get Config parameter"
msgstr "Text to PDF parameters"

#: appGUI/ObjectUI.py:2341
msgid "A GRBL configuration parameter."
msgstr ""

#: appGUI/ObjectUI.py:2346
msgid "Type GRBL parameter ..."
msgstr ""

#: appGUI/ObjectUI.py:2349
#, fuzzy
#| msgid "Geo"
msgid "Get"
msgstr "Geo"

#: appGUI/ObjectUI.py:2351
msgid "Get the value of a specified GRBL parameter."
msgstr ""

#: appGUI/ObjectUI.py:2359
#, fuzzy
#| msgid "Gerber Export"
msgid "Get Report"
msgstr "Gerber Export"

#: appGUI/ObjectUI.py:2361
msgid "Print in shell the GRBL report."
msgstr ""

#: appGUI/ObjectUI.py:2367
msgid "Apply AutoLevelling"
msgstr ""

#: appGUI/ObjectUI.py:2369
msgid ""
"Will send the probing GCode to the GRBL controller,\n"
"wait for the Z probing data and then apply this data\n"
"over the original GCode therefore doing autolevelling."
msgstr ""

#: appGUI/ObjectUI.py:2378
msgid "Will save the GRBL height map."
msgstr ""

#: appGUI/ObjectUI.py:2388
#, fuzzy
#| msgid "Starting G-Code"
msgid "Save Probing GCode"
msgstr "Starting G-Code"

#: appGUI/ObjectUI.py:2390
#, fuzzy
#| msgid "Starting G-Code"
msgid "Will save the probing GCode."
msgstr "Starting G-Code"

#: appGUI/ObjectUI.py:2399
msgid "View/Edit the probing GCode."
msgstr ""

#: appGUI/ObjectUI.py:2406 appObjects/FlatCAMCNCJob.py:1706
#: appObjects/FlatCAMCNCJob.py:1710
#, fuzzy
#| msgid "Import List"
msgid "Import Height Map"
msgstr "Import List"

#: appGUI/ObjectUI.py:2408
msgid ""
"Import the file that has the Z heights\n"
"obtained through probing and then apply this data\n"
"over the original GCode therefore\n"
"doing autolevelling."
msgstr ""

#: appGUI/ObjectUI.py:2426
msgid "Export CNC Code"
msgstr "Export CNC Code"

#: appGUI/ObjectUI.py:2428
#: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:37
#: appGUI/preferences/cncjob/CNCJobOptPrefGroupUI.py:33
msgid ""
"Export and save G-Code to\n"
"make this object to a file."
msgstr ""
"Export and save G-Code to\n"
"make this object to a file."

#: appGUI/ObjectUI.py:2437
msgid "Save CNC Code"
msgstr "Save CNC Code"

#: appGUI/ObjectUI.py:2440
msgid ""
"Opens dialog to save G-Code\n"
"file."
msgstr ""
"Opens dialog to save G-Code\n"
"file."

#: appGUI/ObjectUI.py:2447
#, fuzzy
#| msgid "View CNC Code"
msgid "Review CNC Code."
msgstr "View CNC Code"

#: appGUI/ObjectUI.py:2508
msgid "Script Object"
msgstr "Script Object"

#: appGUI/ObjectUI.py:2528 appGUI/ObjectUI.py:2602
msgid "Auto Completer"
msgstr "Auto Completer"

#: appGUI/ObjectUI.py:2530
msgid "This selects if the auto completer is enabled in the Script Editor."
msgstr "This selects if the auto completer is enabled in the Script Editor."

#: appGUI/ObjectUI.py:2575
msgid "Document Object"
msgstr "Document Object"

#: appGUI/ObjectUI.py:2604
msgid "This selects if the auto completer is enabled in the Document Editor."
msgstr "This selects if the auto completer is enabled in the Document Editor."

#: appGUI/ObjectUI.py:2622
msgid "Font Type"
msgstr "Font Type"

#: appGUI/ObjectUI.py:2639
#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:189
msgid "Font Size"
msgstr "Font Size"

#: appGUI/ObjectUI.py:2675
msgid "Alignment"
msgstr "Alignment"

#: appGUI/ObjectUI.py:2680
msgid "Align Left"
msgstr "Align Left"

#: appGUI/ObjectUI.py:2685 app_Main.py:4993
msgid "Center"
msgstr "Center"

#: appGUI/ObjectUI.py:2690
msgid "Align Right"
msgstr "Align Right"

#: appGUI/ObjectUI.py:2695
msgid "Justify"
msgstr "Justify"

#: appGUI/ObjectUI.py:2702
msgid "Font Color"
msgstr "Font Color"

#: appGUI/ObjectUI.py:2704
msgid "Set the font color for the selected text"
msgstr "Set the font color for the selected text"

#: appGUI/ObjectUI.py:2718
msgid "Selection Color"
msgstr "Selection Color"

#: appGUI/ObjectUI.py:2720
msgid "Set the selection color when doing text selection."
msgstr "Set the selection color when doing text selection."

#: appGUI/ObjectUI.py:2734
msgid "Tab Size"
msgstr "Tab Size"

#: appGUI/ObjectUI.py:2736
msgid "Set the tab size. In pixels. Default value is 80 pixels."
msgstr "Set the tab size. In pixels. Default value is 80 pixels."

#: appGUI/PlotCanvas.py:236 appGUI/PlotCanvasLegacy.py:345
msgid "Axis enabled."
msgstr "Axis enabled."

#: appGUI/PlotCanvas.py:242 appGUI/PlotCanvasLegacy.py:352
msgid "Axis disabled."
msgstr "Axis disabled."

#: appGUI/PlotCanvas.py:260 appGUI/PlotCanvasLegacy.py:372
msgid "HUD enabled."
msgstr "HUD enabled."

#: appGUI/PlotCanvas.py:268 appGUI/PlotCanvasLegacy.py:378
msgid "HUD disabled."
msgstr "HUD disabled."

#: appGUI/PlotCanvas.py:276 appGUI/PlotCanvasLegacy.py:451
msgid "Grid enabled."
msgstr "Grid enabled."

#: appGUI/PlotCanvas.py:280 appGUI/PlotCanvasLegacy.py:459
msgid "Grid disabled."
msgstr "Grid disabled."

#: appGUI/PlotCanvasLegacy.py:1530
msgid ""
"Could not annotate due of a difference between the number of text elements "
"and the number of text positions."
msgstr ""
"Could not annotate due of a difference between the number of text elements "
"and the number of text positions."

#: appGUI/preferences/PreferencesUIManager.py:898
msgid "Preferences applied."
msgstr "Preferences applied."

#: appGUI/preferences/PreferencesUIManager.py:918
msgid "Are you sure you want to continue?"
msgstr "Are you sure you want to continue?"

#: appGUI/preferences/PreferencesUIManager.py:919
msgid "Application will restart"
msgstr "Application will restart"

#: appGUI/preferences/PreferencesUIManager.py:1017
msgid "Preferences closed without saving."
msgstr "Preferences closed without saving."

#: appGUI/preferences/PreferencesUIManager.py:1029
msgid "Preferences default values are restored."
msgstr "Preferences default values are restored."

#: appGUI/preferences/PreferencesUIManager.py:1060 app_Main.py:2622
#: app_Main.py:2690
msgid "Failed to write defaults to file."
msgstr "Failed to write defaults to file."

#: appGUI/preferences/PreferencesUIManager.py:1064
#: appGUI/preferences/PreferencesUIManager.py:1178
msgid "Preferences saved."
msgstr "Preferences saved."

#: appGUI/preferences/PreferencesUIManager.py:1114
msgid "Preferences edited but not saved."
msgstr "Preferences edited but not saved."

#: appGUI/preferences/PreferencesUIManager.py:1163
msgid ""
"One or more values are changed.\n"
"Do you want to save the Preferences?"
msgstr ""
"One or more values are changed.\n"
"Do you want to save the Preferences?"

#: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:27
msgid "CNC Job Adv. Options"
msgstr "CNC Job Adv. Options"

#: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:35
#: appGUI/preferences/cncjob/CNCJobEditorPrefGroupUI.py:31
#: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:30
#: appGUI/preferences/geometry/GeometryEditorPrefGroupUI.py:31
#: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:31
#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:37
#: appGUI/preferences/tools/Tools2CalPrefGroupUI.py:36
#: appGUI/preferences/tools/Tools2EDrillsPrefGroupUI.py:36
#: appGUI/preferences/tools/Tools2FiducialsPrefGroupUI.py:36
#: appGUI/preferences/tools/Tools2InvertPrefGroupUI.py:31
#: appGUI/preferences/tools/Tools2OptimalPrefGroupUI.py:31
#: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:36
#: appGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:31
#: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:30
#: appGUI/preferences/tools/Tools2sidedPrefGroupUI.py:31
#: appGUI/preferences/tools/ToolsCornersPrefGroupUI.py:35
#: appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:32
#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:31
#: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:31
#: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:30
#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:31
#: appGUI/preferences/tools/ToolsPanelizePrefGroupUI.py:31
#: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:31
#: appGUI/preferences/tools/ToolsSubPrefGroupUI.py:31
#: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:31
#: appTools/ToolCalibration.py:762 appTools/ToolCopperThieving.py:1182
#: appTools/ToolCorners.py:377 appTools/ToolEtchCompensation.py:356
#: appTools/ToolFiducials.py:763 appTools/ToolInvertGerber.py:228
#: appTools/ToolQRCode.py:696
msgid "Parameters"
msgstr "Parameters"

#: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:43
msgid "Annotation Size"
msgstr "Annotation Size"

#: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:45
msgid "The font size of the annotation text. In pixels."
msgstr "The font size of the annotation text. In pixels."

#: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:54
msgid "Annotation Color"
msgstr "Annotation Color"

#: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:56
msgid "Set the font color for the annotation texts."
msgstr "Set the font color for the annotation texts."

#: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:66
#, fuzzy
#| msgid "Parameters for this tool"
msgid "Parameters for the autolevelling."
msgstr "Parameters for this tool"

#: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:200
msgid "Safe height (Z) distance when jogging to origin."
msgstr ""

#: appGUI/preferences/cncjob/CNCJobEditorPrefGroupUI.py:27
#, fuzzy
#| msgid "Code Editor"
msgid "CNC Job Editor"
msgstr "Code Editor"

#: appGUI/preferences/cncjob/CNCJobEditorPrefGroupUI.py:33
#: appGUI/preferences/geometry/GeometryEditorPrefGroupUI.py:33
#, fuzzy
#| msgid "A list of Gerber Editor parameters."
msgid "A list of Editor parameters."
msgstr "A list of Gerber Editor parameters."

#: appGUI/preferences/cncjob/CNCJobEditorPrefGroupUI.py:46
msgid "Prepend to G-Code"
msgstr "Prepend to G-Code"

#: appGUI/preferences/cncjob/CNCJobEditorPrefGroupUI.py:48
msgid ""
"Type here any G-Code commands you would\n"
"like to add at the beginning of the G-Code file."
msgstr ""
"Type here any G-Code commands you would\n"
"like to add at the beginning of the G-Code file."

#: appGUI/preferences/cncjob/CNCJobEditorPrefGroupUI.py:55
msgid ""
"Type here any G-Code commands you would like to add at the beginning of the "
"G-Code file."
msgstr ""
"Type here any G-Code commands you would like to add at the beginning of the "
"G-Code file."

#: appGUI/preferences/cncjob/CNCJobEditorPrefGroupUI.py:62
msgid "Append to G-Code"
msgstr "Append to G-Code"

#: appGUI/preferences/cncjob/CNCJobEditorPrefGroupUI.py:64
msgid ""
"Type here any G-Code commands you would\n"
"like to append to the generated file.\n"
"I.e.: M2 (End of program)"
msgstr ""
"Type here any G-Code commands you would\n"
"like to append to the generated file.\n"
"I.e.: M2 (End of program)"

#: appGUI/preferences/cncjob/CNCJobEditorPrefGroupUI.py:72
msgid ""
"Type here any G-Code commands you would like to append to the generated "
"file.\n"
"I.e.: M2 (End of program)"
msgstr ""
"Type here any G-Code commands you would like to append to the generated "
"file.\n"
"I.e.: M2 (End of program)"

#: appGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:26
msgid "CNC Job General"
msgstr "CNC Job General"

#: appGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:47
#: appGUI/preferences/geometry/GeometryGenPrefGroupUI.py:59
#: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:59
#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:45
msgid "Circle Steps"
msgstr "Circle Steps"

#: appGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:49
msgid ""
"The number of circle steps for <b>GCode</b> \n"
"circle and arc shapes linear approximation."
msgstr ""
"The number of circle steps for <b>GCode</b> \n"
"circle and arc shapes linear approximation."

#: appGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:58
msgid "Travel dia"
msgstr "Travel dia"

#: appGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:60
msgid ""
"The width of the travel lines to be\n"
"rendered in the plot."
msgstr ""
"The width of the travel lines to be\n"
"rendered in the plot."

#: appGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:73
msgid "G-code Decimals"
msgstr "G-code Decimals"

#: appGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:76
#: appTools/ToolFiducials.py:682
msgid "Coordinates"
msgstr "Coordinates"

#: appGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:78
msgid ""
"The number of decimals to be used for \n"
"the X, Y, Z coordinates in CNC code (GCODE, etc.)"
msgstr ""
"The number of decimals to be used for \n"
"the X, Y, Z coordinates in CNC code (GCODE, etc.)"

#: appGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:91
msgid ""
"The number of decimals to be used for \n"
"the Feedrate parameter in CNC code (GCODE, etc.)"
msgstr ""
"The number of decimals to be used for \n"
"the Feedrate parameter in CNC code (GCODE, etc.)"

#: appGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:102
msgid "Coordinates type"
msgstr "Coordinates type"

#: appGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:104
msgid ""
"The type of coordinates to be used in Gcode.\n"
"Can be:\n"
"- Absolute G90 -> the reference is the origin x=0, y=0\n"
"- Incremental G91 -> the reference is the previous position"
msgstr ""
"The type of coordinates to be used in Gcode.\n"
"Can be:\n"
"- Absolute G90 -> the reference is the origin x=0, y=0\n"
"- Incremental G91 -> the reference is the previous position"

#: appGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:110
msgid "Absolute G90"
msgstr "Absolute G90"

#: appGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:111
msgid "Incremental G91"
msgstr "Incremental G91"

#: appGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:121
msgid "Force Windows style line-ending"
msgstr "Force Windows style line-ending"

#: appGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:123
msgid ""
"When checked will force a Windows style line-ending\n"
"(\\r\\n) on non-Windows OS's."
msgstr ""
"When checked will force a Windows style line-ending\n"
"(\\r\\n) on non-Windows OS's."

#: appGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:135
msgid "Travel Line Color"
msgstr "Travel Line Color"

#: appGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:139
#: appGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:180
#: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:275
#: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:154
#: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:195
#: appGUI/preferences/geometry/GeometryGenPrefGroupUI.py:158
#: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:169
#: appTools/ToolRulesCheck.py:1288
msgid "Outline"
msgstr "Outline"

#: appGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:141
msgid "Set the travel line color for plotted objects."
msgstr "Set the travel line color for plotted objects."

#: appGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:149
#: appGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:190
#: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:285
#: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:163
#: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:205
#: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:179
msgid "Fill"
msgstr "Fill"

#: appGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:151
#: appGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:192
#: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:287
#: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:181
msgid ""
"Set the fill color for plotted objects.\n"
"First 6 digits are the color and the last 2\n"
"digits are for alpha (transparency) level."
msgstr ""
"Set the fill color for plotted objects.\n"
"First 6 digits are the color and the last 2\n"
"digits are for alpha (transparency) level."

#: appGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:161
#: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:297
#: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:176
#: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:218
#: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:191
msgid "Alpha"
msgstr "Alpha"

#: appGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:163
#: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:299
#: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:193
msgid "Set the fill transparency for plotted objects."
msgstr "Set the fill transparency for plotted objects."

#: appGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:176
#: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:271
#: appGUI/preferences/geometry/GeometryGenPrefGroupUI.py:154
#: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:165
msgid "Object Color"
msgstr "Object Color"

#: appGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:182
msgid "Set the color for plotted objects."
msgstr "Set the color for plotted objects."

#: appGUI/preferences/cncjob/CNCJobOptPrefGroupUI.py:27
msgid "CNC Job Options"
msgstr "CNC Job Options"

#: appGUI/preferences/cncjob/CNCJobOptPrefGroupUI.py:31
msgid "Export G-Code"
msgstr "Export G-Code"

#: appGUI/preferences/cncjob/CNCJobOptPrefGroupUI.py:52
msgid "Plot kind"
msgstr "Plot kind"

#: appGUI/preferences/excellon/ExcellonAdvOptPrefGroupUI.py:27
msgid "Excellon Adv. Options"
msgstr "Excellon Adv. Options"

#: appGUI/preferences/excellon/ExcellonAdvOptPrefGroupUI.py:34
#: appGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:34
#: appGUI/preferences/gerber/GerberAdvOptPrefGroupUI.py:31
#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:276
msgid "Advanced Options"
msgstr "Advanced Options"

#: appGUI/preferences/excellon/ExcellonAdvOptPrefGroupUI.py:36
msgid ""
"A list of Excellon advanced parameters.\n"
"Those parameters are available only for\n"
"Advanced App. Level."
msgstr ""
"A list of Excellon advanced parameters.\n"
"Those parameters are available only for\n"
"Advanced App. Level."

#: appGUI/preferences/excellon/ExcellonAdvOptPrefGroupUI.py:48
#: appGUI/preferences/gerber/GerberAdvOptPrefGroupUI.py:52
msgid "Table Show/Hide"
msgstr "Table Show/Hide"

#: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:32
msgid "A list of Excellon Editor parameters."
msgstr "A list of Excellon Editor parameters."

#: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:40
#: appGUI/preferences/geometry/GeometryEditorPrefGroupUI.py:41
#: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:41
#: appGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:172
msgid "Selection limit"
msgstr "Selection limit"

#: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:42
msgid ""
"Set the number of selected Excellon geometry\n"
"items above which the utility geometry\n"
"becomes just a selection rectangle.\n"
"Increases the performance when moving a\n"
"large number of geometric elements."
msgstr ""
"Set the number of selected Excellon geometry\n"
"items above which the utility geometry\n"
"becomes just a selection rectangle.\n"
"Increases the performance when moving a\n"
"large number of geometric elements."

#: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:55
#: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:134
#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:117
#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:123
msgid "New Dia"
msgstr "New Dia"

#: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:80
msgid "Linear Drill Array"
msgstr "Linear Drill Array"

#: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:84
#: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:232
#: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:121
msgid "Linear Direction"
msgstr "Linear Direction"

#: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:126
msgid "Circular Drill Array"
msgstr "Circular Drill Array"

#: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:130
#: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:280
#: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:165
msgid "Circular Direction"
msgstr "Circular Direction"

#: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:132
#: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:282
#: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:167
msgid ""
"Direction for circular array.\n"
"Can be CW = clockwise or CCW = counter clockwise."
msgstr ""
"Direction for circular array.\n"
"Can be CW = clockwise or CCW = counter clockwise."

#: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:143
#: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:293
#: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:178
msgid "Circular Angle"
msgstr "Circular Angle"

#: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:196
msgid ""
"Angle at which the slot is placed.\n"
"The precision is of max 2 decimals.\n"
"Min value is: -359.99 degrees.\n"
"Max value is:  360.00 degrees."
msgstr ""
"Angle at which the slot is placed.\n"
"The precision is of max 2 decimals.\n"
"Min value is: -359.99 degrees.\n"
"Max value is:  360.00 degrees."

#: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:215
msgid "Linear Slot Array"
msgstr "Linear Slot Array"

#: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:276
msgid "Circular Slot Array"
msgstr "Circular Slot Array"

#: appGUI/preferences/excellon/ExcellonExpPrefGroupUI.py:26
msgid "Excellon Export"
msgstr "Excellon Export"

#: appGUI/preferences/excellon/ExcellonExpPrefGroupUI.py:30
#: appGUI/preferences/gerber/GerberExpPrefGroupUI.py:31
msgid "Export Options"
msgstr "Export Options"

#: appGUI/preferences/excellon/ExcellonExpPrefGroupUI.py:32
msgid ""
"The parameters set here are used in the file exported\n"
"when using the File -> Export -> Export Excellon menu entry."
msgstr ""
"The parameters set here are used in the file exported\n"
"when using the File -> Export -> Export Excellon menu entry."

#: appGUI/preferences/excellon/ExcellonExpPrefGroupUI.py:41
#: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:172
#: appGUI/preferences/general/GeneralAppPrefGroupUI.py:39
#: appGUI/preferences/gerber/GerberExpPrefGroupUI.py:42
#: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:82
#: appTools/ToolDistance.py:562 appTools/ToolDistanceMin.py:237
#: appTools/ToolPcbWizard.py:455 appTools/ToolProperties.py:157
msgid "Units"
msgstr "Units"

#: appGUI/preferences/excellon/ExcellonExpPrefGroupUI.py:43
#: appGUI/preferences/excellon/ExcellonExpPrefGroupUI.py:49
msgid "The units used in the Excellon file."
msgstr "The units used in the Excellon file."

#: appGUI/preferences/excellon/ExcellonExpPrefGroupUI.py:46
#: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:96
#: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:182
#: appGUI/preferences/gerber/GerberExpPrefGroupUI.py:47
#: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:87
#: appTools/ToolCalculators.py:187 appTools/ToolPcbWizard.py:453
msgid "INCH"
msgstr "INCH"

#: appGUI/preferences/excellon/ExcellonExpPrefGroupUI.py:47
#: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:183
#: appGUI/preferences/general/GeneralAppPrefGroupUI.py:43
#: appGUI/preferences/gerber/GerberExpPrefGroupUI.py:48
#: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:88
#: appTools/ToolCalculators.py:188 appTools/ToolPcbWizard.py:454
msgid "MM"
msgstr "MM"

#: appGUI/preferences/excellon/ExcellonExpPrefGroupUI.py:55
#: appGUI/preferences/gerber/GerberExpPrefGroupUI.py:56
msgid "Int/Decimals"
msgstr "Int/Decimals"

#: appGUI/preferences/excellon/ExcellonExpPrefGroupUI.py:57
msgid ""
"The NC drill files, usually named Excellon files\n"
"are files that can be found in different formats.\n"
"Here we set the format used when the provided\n"
"coordinates are not using period."
msgstr ""
"The NC drill files, usually named Excellon files\n"
"are files that can be found in different formats.\n"
"Here we set the format used when the provided\n"
"coordinates are not using period."

#: appGUI/preferences/excellon/ExcellonExpPrefGroupUI.py:69
#: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:104
#: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:133
msgid ""
"This numbers signify the number of digits in\n"
"the whole part of Excellon coordinates."
msgstr ""
"This numbers signify the number of digits in\n"
"the whole part of Excellon coordinates."

#: appGUI/preferences/excellon/ExcellonExpPrefGroupUI.py:82
#: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:117
#: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:146
msgid ""
"This numbers signify the number of digits in\n"
"the decimal part of Excellon coordinates."
msgstr ""
"This numbers signify the number of digits in\n"
"the decimal part of Excellon coordinates."

#: appGUI/preferences/excellon/ExcellonExpPrefGroupUI.py:91
msgid "Format"
msgstr "Format"

#: appGUI/preferences/excellon/ExcellonExpPrefGroupUI.py:93
#: appGUI/preferences/excellon/ExcellonExpPrefGroupUI.py:103
msgid ""
"Select the kind of coordinates format used.\n"
"Coordinates can be saved with decimal point or without.\n"
"When there is no decimal point, it is required to specify\n"
"the number of digits for integer part and the number of decimals.\n"
"Also it will have to be specified if LZ = leading zeros are kept\n"
"or TZ = trailing zeros are kept."
msgstr ""
"Select the kind of coordinates format used.\n"
"Coordinates can be saved with decimal point or without.\n"
"When there is no decimal point, it is required to specify\n"
"the number of digits for integer part and the number of decimals.\n"
"Also it will have to be specified if LZ = leading zeros are kept\n"
"or TZ = trailing zeros are kept."

#: appGUI/preferences/excellon/ExcellonExpPrefGroupUI.py:100
msgid "Decimal"
msgstr "Decimal"

#: appGUI/preferences/excellon/ExcellonExpPrefGroupUI.py:101
msgid "No-Decimal"
msgstr "No-Decimal"

#: appGUI/preferences/excellon/ExcellonExpPrefGroupUI.py:114
#: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:154
#: appGUI/preferences/gerber/GerberExpPrefGroupUI.py:96
#: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:97
msgid "Zeros"
msgstr "Zeros"

#: appGUI/preferences/excellon/ExcellonExpPrefGroupUI.py:117
msgid ""
"This sets the type of Excellon zeros.\n"
"If LZ then Leading Zeros are kept and\n"
"Trailing Zeros are removed.\n"
"If TZ is checked then Trailing Zeros are kept\n"
"and Leading Zeros are removed."
msgstr ""
"This sets the type of Excellon zeros.\n"
"If LZ then Leading Zeros are kept and\n"
"Trailing Zeros are removed.\n"
"If TZ is checked then Trailing Zeros are kept\n"
"and Leading Zeros are removed."

#: appGUI/preferences/excellon/ExcellonExpPrefGroupUI.py:124
#: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:167
#: appGUI/preferences/gerber/GerberExpPrefGroupUI.py:106
#: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:107
#: appTools/ToolPcbWizard.py:439
msgid "LZ"
msgstr "LZ"

#: appGUI/preferences/excellon/ExcellonExpPrefGroupUI.py:125
#: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:168
#: appGUI/preferences/gerber/GerberExpPrefGroupUI.py:107
#: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:108
#: appTools/ToolPcbWizard.py:440
msgid "TZ"
msgstr "TZ"

#: appGUI/preferences/excellon/ExcellonExpPrefGroupUI.py:127
msgid ""
"This sets the default type of Excellon zeros.\n"
"If LZ then Leading Zeros are kept and\n"
"Trailing Zeros are removed.\n"
"If TZ is checked then Trailing Zeros are kept\n"
"and Leading Zeros are removed."
msgstr ""
"This sets the default type of Excellon zeros.\n"
"If LZ then Leading Zeros are kept and\n"
"Trailing Zeros are removed.\n"
"If TZ is checked then Trailing Zeros are kept\n"
"and Leading Zeros are removed."

#: appGUI/preferences/excellon/ExcellonExpPrefGroupUI.py:137
msgid "Slot type"
msgstr "Slot type"

#: appGUI/preferences/excellon/ExcellonExpPrefGroupUI.py:140
#: appGUI/preferences/excellon/ExcellonExpPrefGroupUI.py:150
msgid ""
"This sets how the slots will be exported.\n"
"If ROUTED then the slots will be routed\n"
"using M15/M16 commands.\n"
"If DRILLED(G85) the slots will be exported\n"
"using the Drilled slot command (G85)."
msgstr ""
"This sets how the slots will be exported.\n"
"If ROUTED then the slots will be routed\n"
"using M15/M16 commands.\n"
"If DRILLED(G85) the slots will be exported\n"
"using the Drilled slot command (G85)."

#: appGUI/preferences/excellon/ExcellonExpPrefGroupUI.py:147
msgid "Routed"
msgstr "Routed"

#: appGUI/preferences/excellon/ExcellonExpPrefGroupUI.py:148
msgid "Drilled(G85)"
msgstr "Drilled(G85)"

#: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:29
msgid "Excellon General"
msgstr "Excellon General"

#: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:54
#: appGUI/preferences/geometry/GeometryGenPrefGroupUI.py:47
#: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:52
msgid "M-Color"
msgstr "M-Color"

#: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:71
msgid "Excellon Format"
msgstr "Excellon Format"

#: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:73
msgid ""
"The NC drill files, usually named Excellon files\n"
"are files that can be found in different formats.\n"
"Here we set the format used when the provided\n"
"coordinates are not using period.\n"
"\n"
"Possible presets:\n"
"\n"
"PROTEUS 3:3 MM LZ\n"
"DipTrace 5:2 MM TZ\n"
"DipTrace 4:3 MM LZ\n"
"\n"
"EAGLE 3:3 MM TZ\n"
"EAGLE 4:3 MM TZ\n"
"EAGLE 2:5 INCH TZ\n"
"EAGLE 3:5 INCH TZ\n"
"\n"
"ALTIUM 2:4 INCH LZ\n"
"Sprint Layout 2:4 INCH LZ\n"
"KiCAD 3:5 INCH TZ"
msgstr ""
"The NC drill files, usually named Excellon files\n"
"are files that can be found in different formats.\n"
"Here we set the format used when the provided\n"
"coordinates are not using period.\n"
"\n"
"Possible presets:\n"
"\n"
"PROTEUS 3:3 MM LZ\n"
"DipTrace 5:2 MM TZ\n"
"DipTrace 4:3 MM LZ\n"
"\n"
"EAGLE 3:3 MM TZ\n"
"EAGLE 4:3 MM TZ\n"
"EAGLE 2:5 INCH TZ\n"
"EAGLE 3:5 INCH TZ\n"
"\n"
"ALTIUM 2:4 INCH LZ\n"
"Sprint Layout 2:4 INCH LZ\n"
"KiCAD 3:5 INCH TZ"

#: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:97
msgid "Default values for INCH are 2:4"
msgstr "Default values for INCH are 2:4"

#: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:125
msgid "METRIC"
msgstr "METRIC"

#: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:126
msgid "Default values for METRIC are 3:3"
msgstr "Default values for METRIC are 3:3"

#: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:157
msgid ""
"This sets the type of Excellon zeros.\n"
"If LZ then Leading Zeros are kept and\n"
"Trailing Zeros are removed.\n"
"If TZ is checked then Trailing Zeros are kept\n"
"and Leading Zeros are removed.\n"
"\n"
"This is used when there is no information\n"
"stored in the Excellon file."
msgstr ""
"This sets the type of Excellon zeros.\n"
"If LZ then Leading Zeros are kept and\n"
"Trailing Zeros are removed.\n"
"If TZ is checked then Trailing Zeros are kept\n"
"and Leading Zeros are removed.\n"
"\n"
"This is used when there is no information\n"
"stored in the Excellon file."

#: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:175
msgid ""
"This sets the default units of Excellon files.\n"
"If it is not detected in the parsed file the value here\n"
"will be used.Some Excellon files don't have an header\n"
"therefore this parameter will be used."
msgstr ""
"This sets the default units of Excellon files.\n"
"If it is not detected in the parsed file the value here\n"
"will be used.Some Excellon files don't have an header\n"
"therefore this parameter will be used."

#: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:185
msgid ""
"This sets the units of Excellon files.\n"
"Some Excellon files don't have an header\n"
"therefore this parameter will be used."
msgstr ""
"This sets the units of Excellon files.\n"
"Some Excellon files don't have an header\n"
"therefore this parameter will be used."

#: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:193
msgid "Update Export settings"
msgstr "Update Export settings"

#: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:210
#: appGUI/preferences/geometry/GeometryGenPrefGroupUI.py:91
#: appGUI/preferences/tools/ToolsPanelizePrefGroupUI.py:110
#: appTools/ToolPanelize.py:821
#, fuzzy
#| msgid "Optimization Time"
msgid "Path Optimization"
msgstr "Optimization Time"

#: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:213
#: appGUI/preferences/geometry/GeometryGenPrefGroupUI.py:94
msgid "Algorithm:"
msgstr "Algorithm:"

#: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:215
#, fuzzy
#| msgid ""
#| "This sets the optimization type for the Excellon drill path.\n"
#| "If <<MetaHeuristic>> is checked then Google OR-Tools algorithm with\n"
#| "MetaHeuristic Guided Local Path is used. Default search time is 3sec.\n"
#| "If <<Basic>> is checked then Google OR-Tools Basic algorithm is used.\n"
#| "If <<TSA>> is checked then Travelling Salesman algorithm is used for\n"
#| "drill path optimization.\n"
#| "\n"
#| "If this control is disabled, then FlatCAM works in 32bit mode and it "
#| "uses\n"
#| "Travelling Salesman algorithm for path optimization."
msgid ""
"This sets the optimization type for the Excellon drill path.\n"
"If <<MetaHeuristic>> is checked then Google OR-Tools algorithm with\n"
"MetaHeuristic Guided Local Path is used. Default search time is 3sec.\n"
"If <<Basic>> is checked then Google OR-Tools Basic algorithm is used.\n"
"If <<TSA>> is checked then Travelling Salesman algorithm is used for\n"
"drill path optimization.\n"
"\n"
"Some options are disabled when FlatCAM works in 32bit mode."
msgstr ""
"This sets the optimization type for the Excellon drill path.\n"
"If <<MetaHeuristic>> is checked then Google OR-Tools algorithm with\n"
"MetaHeuristic Guided Local Path is used. Default search time is 3sec.\n"
"If <<Basic>> is checked then Google OR-Tools Basic algorithm is used.\n"
"If <<TSA>> is checked then Travelling Salesman algorithm is used for\n"
"drill path optimization.\n"
"\n"
"If this control is disabled, then FlatCAM works in 32bit mode and it uses\n"
"Travelling Salesman algorithm for path optimization."

#: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:225
#: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:310
#: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:314
#: appGUI/preferences/geometry/GeometryGenPrefGroupUI.py:109
#: appGUI/preferences/geometry/GeometryGenPrefGroupUI.py:171
#: appGUI/preferences/geometry/GeometryGenPrefGroupUI.py:175
msgid "MetaHeuristic"
msgstr "MetaHeuristic"

#: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:226
#: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:310
#: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:314
#: appGUI/preferences/general/GeneralAppPrefGroupUI.py:104
#: appGUI/preferences/geometry/GeometryGenPrefGroupUI.py:110
#: appGUI/preferences/geometry/GeometryGenPrefGroupUI.py:171
#: appGUI/preferences/geometry/GeometryGenPrefGroupUI.py:175
#: appObjects/FlatCAMExcellon.py:154 appObjects/FlatCAMGeometry.py:560
#: appObjects/FlatCAMGerber.py:167 appTools/ToolDrilling.py:306
#: appTools/ToolIsolation.py:241 appTools/ToolMilling.py:294
msgid "Basic"
msgstr "Basic"

#: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:227
#: appGUI/preferences/geometry/GeometryGenPrefGroupUI.py:111
msgid "TSA"
msgstr "TSA"

#: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:233
#: appGUI/preferences/geometry/GeometryGenPrefGroupUI.py:117
#: appGUI/preferences/geometry/GeometryOptPrefGroupUI.py:238
#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:209
msgid "Duration"
msgstr "Duration"

#: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:236
#: appGUI/preferences/geometry/GeometryGenPrefGroupUI.py:119
msgid ""
"When OR-Tools Metaheuristic (MH) is enabled there is a\n"
"maximum threshold for how much time is spent doing the\n"
"path optimization. This max duration is set here.\n"
"In seconds."
msgstr ""
"When OR-Tools Metaheuristic (MH) is enabled there is a\n"
"maximum threshold for how much time is spent doing the\n"
"path optimization. This max duration is set here.\n"
"In seconds."

#: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:255
#: appGUI/preferences/geometry/GeometryGenPrefGroupUI.py:138
#, fuzzy
#| msgid "Plot Options"
msgid "Join Option"
msgstr "Plot Options"

#: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:258
#: appGUI/preferences/geometry/GeometryGenPrefGroupUI.py:141
#, fuzzy
#| msgid "Rules Tool"
msgid "Fuse Tools"
msgstr "Rules Tool"

#: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:260
#: appGUI/preferences/geometry/GeometryGenPrefGroupUI.py:143
msgid ""
"When checked the joined (merged) object tools\n"
"will be merged also but only if they share some of their attributes."
msgstr ""

#: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:277
#: appGUI/preferences/geometry/GeometryGenPrefGroupUI.py:160
#: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:171
msgid "Set the line color for plotted objects."
msgstr "Set the line color for plotted objects."

#: appGUI/preferences/excellon/ExcellonOptPrefGroupUI.py:29
msgid "Excellon Options"
msgstr "Excellon Options"

#: appGUI/preferences/excellon/ExcellonOptPrefGroupUI.py:33
#: appGUI/preferences/geometry/GeometryOptPrefGroupUI.py:35
msgid "Create CNC Job"
msgstr "Create CNC Job"

#: appGUI/preferences/excellon/ExcellonOptPrefGroupUI.py:35
msgid ""
"Parameters used to create a CNC Job object\n"
"for this drill object."
msgstr ""
"Parameters used to create a CNC Job object\n"
"for this drill object."

#: appGUI/preferences/excellon/ExcellonOptPrefGroupUI.py:48
#: appTools/ToolMilling.py:1740
msgid ""
"Operation type:\n"
"- Drilling -> will drill the drills/slots associated with this tool\n"
"- Milling -> will mill the drills/slots"
msgstr ""
"Operation type:\n"
"- Drilling -> will drill the drills/slots associated with this tool\n"
"- Milling -> will mill the drills/slots"

#: appGUI/preferences/excellon/ExcellonOptPrefGroupUI.py:64
#: appTools/ToolMilling.py:1762
msgid ""
"Milling type:\n"
"- Drills -> will mill the drills associated with this tool\n"
"- Slots -> will mill the slots associated with this tool\n"
"- Both -> will mill both drills and mills or whatever is available"
msgstr ""
"Milling type:\n"
"- Drills -> will mill the drills associated with this tool\n"
"- Slots -> will mill the slots associated with this tool\n"
"- Both -> will mill both drills and mills or whatever is available"

#: appGUI/preferences/excellon/ExcellonOptPrefGroupUI.py:73
#: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:199
#: appTools/ToolFilm.py:1105 appTools/ToolMilling.py:1771
msgid "Both"
msgstr "Both"

#: appGUI/preferences/excellon/ExcellonOptPrefGroupUI.py:80
#: appTools/ToolMilling.py:1779
msgid "Milling Diameter"
msgstr "Milling Diameter"

#: appGUI/preferences/excellon/ExcellonOptPrefGroupUI.py:82
#: appTools/ToolMilling.py:1781
msgid "The diameter of the tool who will do the milling"
msgstr "The diameter of the tool who will do the milling"

#: appGUI/preferences/excellon/ExcellonOptPrefGroupUI.py:93
msgid "Mill Holes"
msgstr "Mill Holes"

#: appGUI/preferences/excellon/ExcellonOptPrefGroupUI.py:95
msgid "Create Geometry for milling holes."
msgstr "Create Geometry for milling holes."

#: appGUI/preferences/excellon/ExcellonOptPrefGroupUI.py:99
msgid "Drill Tool dia"
msgstr "Drill Tool dia"

#: appGUI/preferences/excellon/ExcellonOptPrefGroupUI.py:110
msgid "Slot Tool dia"
msgstr "Slot Tool dia"

#: appGUI/preferences/excellon/ExcellonOptPrefGroupUI.py:112
msgid ""
"Diameter of the cutting tool\n"
"when milling slots."
msgstr ""
"Diameter of the cutting tool\n"
"when milling slots."

#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:28
#: appGUI/preferences/general/GeneralAppSettingsGroupUI.py:74
msgid "App Settings"
msgstr "App Settings"

#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:49
msgid "Grid Settings"
msgstr "Grid Settings"

#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:53
msgid "X value"
msgstr "X value"

#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:55
msgid "This is the Grid snap value on X axis."
msgstr "This is the Grid snap value on X axis."

#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:65
msgid "Y value"
msgstr "Y value"

#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:67
msgid "This is the Grid snap value on Y axis."
msgstr "This is the Grid snap value on Y axis."

#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:77
msgid "Snap Max"
msgstr "Snap Max"

#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:92
msgid "Workspace Settings"
msgstr "Workspace Settings"

#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:95
msgid "Active"
msgstr "Active"

#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:105
msgid ""
"Select the type of rectangle to be used on canvas,\n"
"as valid workspace."
msgstr ""
"Select the type of rectangle to be used on canvas,\n"
"as valid workspace."

#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:171
msgid "Orientation"
msgstr "Orientation"

#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:172
#: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:228
#: appTools/ToolFilm.py:1270
msgid ""
"Can be:\n"
"- Portrait\n"
"- Landscape"
msgstr ""
"Can be:\n"
"- Portrait\n"
"- Landscape"

#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:176
#: appGUI/preferences/general/GeneralAppSettingsGroupUI.py:168
#: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:232
#: appTools/ToolFilm.py:1274
msgid "Portrait"
msgstr "Portrait"

#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:177
#: appGUI/preferences/general/GeneralAppSettingsGroupUI.py:169
#: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:233
#: appTools/ToolFilm.py:1275
msgid "Landscape"
msgstr "Landscape"

#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:193
msgid "Notebook"
msgstr "Notebook"

#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:195
msgid ""
"This sets the font size for the elements found in the Notebook.\n"
"The notebook is the collapsible area in the left side of the GUI,\n"
"and include the Project, Selected and Tool tabs."
msgstr ""
"This sets the font size for the elements found in the Notebook.\n"
"The notebook is the collapsible area in the left side of the GUI,\n"
"and include the Project, Selected and Tool tabs."

#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:214
#: appTools/ToolDblSided.py:673 appTools/ToolDblSided.py:847
msgid "Axis"
msgstr "Axis"

#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:216
msgid "This sets the font size for canvas axis."
msgstr "This sets the font size for canvas axis."

#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:233
msgid "Textbox"
msgstr "Textbox"

#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:235
msgid ""
"This sets the font size for the Textbox GUI\n"
"elements that are used in the application."
msgstr ""
"This sets the font size for the Textbox GUI\n"
"elements that are used in the application."

#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:253
msgid "HUD"
msgstr "HUD"

#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:255
msgid "This sets the font size for the Heads Up Display."
msgstr "This sets the font size for the Heads Up Display."

#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:280
msgid "Mouse Settings"
msgstr "Mouse Settings"

#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:284
msgid "Cursor Shape"
msgstr "Cursor Shape"

#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:286
msgid ""
"Choose a mouse cursor shape.\n"
"- Small -> with a customizable size.\n"
"- Big -> Infinite lines"
msgstr ""
"Choose a mouse cursor shape.\n"
"- Small -> with a customizable size.\n"
"- Big -> Infinite lines"

#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:292
#: appGUI/preferences/general/GeneralAppSettingsGroupUI.py:207
msgid "Small"
msgstr "Small"

#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:293
#: appGUI/preferences/general/GeneralAppSettingsGroupUI.py:208
msgid "Big"
msgstr "Big"

#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:300
msgid "Cursor Size"
msgstr "Cursor Size"

#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:302
msgid "Set the size of the mouse cursor, in pixels."
msgstr "Set the size of the mouse cursor, in pixels."

#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:313
msgid "Cursor Width"
msgstr "Cursor Width"

#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:315
msgid "Set the line width of the mouse cursor, in pixels."
msgstr "Set the line width of the mouse cursor, in pixels."

#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:326
#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:333
msgid "Cursor Color"
msgstr "Cursor Color"

#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:328
msgid "Check this box to color mouse cursor."
msgstr "Check this box to color mouse cursor."

#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:335
msgid "Set the color of the mouse cursor."
msgstr "Set the color of the mouse cursor."

#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:350
msgid "Pan Button"
msgstr "Pan Button"

#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:352
msgid ""
"Select the mouse button to use for panning:\n"
"- MMB --> Middle Mouse Button\n"
"- RMB --> Right Mouse Button"
msgstr ""
"Select the mouse button to use for panning:\n"
"- MMB --> Middle Mouse Button\n"
"- RMB --> Right Mouse Button"

#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:356
#: appGUI/preferences/general/GeneralAppSettingsGroupUI.py:240
msgid "MMB"
msgstr "MMB"

#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:357
#: appGUI/preferences/general/GeneralAppSettingsGroupUI.py:241
msgid "RMB"
msgstr "RMB"

#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:363
msgid "Multiple Selection"
msgstr "Multiple Selection"

#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:365
msgid "Select the key used for multiple selection."
msgstr "Select the key used for multiple selection."

#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:367
#: appGUI/preferences/general/GeneralAppSettingsGroupUI.py:247
msgid "CTRL"
msgstr "CTRL"

#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:368
#: appGUI/preferences/general/GeneralAppSettingsGroupUI.py:248
msgid "SHIFT"
msgstr "SHIFT"

#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:379
msgid "Delete object confirmation"
msgstr "Delete object confirmation"

#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:381
msgid ""
"When checked the application will ask for user confirmation\n"
"whenever the Delete object(s) event is triggered, either by\n"
"menu shortcut or key shortcut."
msgstr ""
"When checked the application will ask for user confirmation\n"
"whenever the Delete object(s) event is triggered, either by\n"
"menu shortcut or key shortcut."

#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:387
#, fuzzy
#| msgid "Excellon Editor"
msgid "Allow Edit"
msgstr "Excellon Editor"

#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:389
msgid ""
"When cheched, the user can edit the objects in the Project Tab\n"
"by using the left mouse button click on the object name.\n"
"Active after restart."
msgstr ""

#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:396
msgid "\"Open\" behavior"
msgstr "\"Open\" behavior"

#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:398
msgid ""
"When checked the path for the last saved file is used when saving files,\n"
"and the path for the last opened file is used when opening files.\n"
"\n"
"When unchecked the path for opening files is the one used last: either the\n"
"path for saving files or the path for opening files."
msgstr ""
"When checked the path for the last saved file is used when saving files,\n"
"and the path for the last opened file is used when opening files.\n"
"\n"
"When unchecked the path for opening files is the one used last: either the\n"
"path for saving files or the path for opening files."

#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:407
msgid "Enable ToolTips"
msgstr "Enable ToolTips"

#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:409
msgid ""
"Check this box if you want to have toolTips displayed\n"
"when hovering with mouse over items throughout the App."
msgstr ""
"Check this box if you want to have toolTips displayed\n"
"when hovering with mouse over items throughout the App."

#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:416
msgid "Allow Machinist Unsafe Settings"
msgstr "Allow Machinist Unsafe Settings"

#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:418
msgid ""
"If checked, some of the application settings will be allowed\n"
"to have values that are usually unsafe to use.\n"
"Like Z travel negative values or Z Cut positive values.\n"
"It will applied at the next application start.\n"
"<<WARNING>>: Don't change this unless you know what you are doing !!!"
msgstr ""
"If checked, some of the application settings will be allowed\n"
"to have values that are usually unsafe to use.\n"
"Like Z travel negative values or Z Cut positive values.\n"
"It will applied at the next application start.\n"
"<<WARNING>>: Don't change this unless you know what you are doing !!!"

#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:430
msgid "Bookmarks limit"
msgstr "Bookmarks limit"

#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:432
msgid ""
"The maximum number of bookmarks that may be installed in the menu.\n"
"The number of bookmarks in the bookmark manager may be greater\n"
"but the menu will hold only so much."
msgstr ""
"The maximum number of bookmarks that may be installed in the menu.\n"
"The number of bookmarks in the bookmark manager may be greater\n"
"but the menu will hold only so much."

#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:441
msgid "Activity Icon"
msgstr "Activity Icon"

#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:443
msgid "Select the GIF that show activity when FlatCAM is active."
msgstr "Select the GIF that show activity when FlatCAM is active."

#: appGUI/preferences/general/GeneralAppPrefGroupUI.py:29
msgid "App Preferences"
msgstr "App Preferences"

#: appGUI/preferences/general/GeneralAppPrefGroupUI.py:40
msgid ""
"The default value for FlatCAM units.\n"
"Whatever is selected here is set every time\n"
"FlatCAM is started."
msgstr ""
"The default value for FlatCAM units.\n"
"Whatever is selected here is set every time\n"
"FlatCAM is started."

#: appGUI/preferences/general/GeneralAppPrefGroupUI.py:44
msgid "IN"
msgstr "IN"

#: appGUI/preferences/general/GeneralAppPrefGroupUI.py:50
msgid "Precision MM"
msgstr "Precision MM"

#: appGUI/preferences/general/GeneralAppPrefGroupUI.py:52
msgid ""
"The number of decimals used throughout the application\n"
"when the set units are in METRIC system.\n"
"Any change here require an application restart."
msgstr ""
"The number of decimals used throughout the application\n"
"when the set units are in METRIC system.\n"
"Any change here require an application restart."

#: appGUI/preferences/general/GeneralAppPrefGroupUI.py:64
msgid "Precision INCH"
msgstr "Precision INCH"

#: appGUI/preferences/general/GeneralAppPrefGroupUI.py:66
msgid ""
"The number of decimals used throughout the application\n"
"when the set units are in INCH system.\n"
"Any change here require an application restart."
msgstr ""
"The number of decimals used throughout the application\n"
"when the set units are in INCH system.\n"
"Any change here require an application restart."

#: appGUI/preferences/general/GeneralAppPrefGroupUI.py:78
msgid "Graphic Engine"
msgstr "Graphic Engine"

#: appGUI/preferences/general/GeneralAppPrefGroupUI.py:79
msgid ""
"Choose what graphic engine to use in FlatCAM.\n"
"Legacy(2D) -> reduced functionality, slow performance but enhanced "
"compatibility.\n"
"OpenGL(3D) -> full functionality, high performance\n"
"Some graphic cards are too old and do not work in OpenGL(3D) mode, like:\n"
"Intel HD3000 or older. In this case the plot area will be black therefore\n"
"use the Legacy(2D) mode."
msgstr ""
"Choose what graphic engine to use in FlatCAM.\n"
"Legacy(2D) -> reduced functionality, slow performance but enhanced "
"compatibility.\n"
"OpenGL(3D) -> full functionality, high performance\n"
"Some graphic cards are too old and do not work in OpenGL(3D) mode, like:\n"
"Intel HD3000 or older. In this case the plot area will be black therefore\n"
"use the Legacy(2D) mode."

#: appGUI/preferences/general/GeneralAppPrefGroupUI.py:85
msgid "Legacy(2D)"
msgstr "Legacy(2D)"

#: appGUI/preferences/general/GeneralAppPrefGroupUI.py:86
msgid "OpenGL(3D)"
msgstr "OpenGL(3D)"

#: appGUI/preferences/general/GeneralAppPrefGroupUI.py:98
#, fuzzy
#| msgid "APP. LEVEL"
msgid "APPLICATION LEVEL"
msgstr "APP. LEVEL"

#: appGUI/preferences/general/GeneralAppPrefGroupUI.py:99
msgid ""
"Choose the default level of usage for FlatCAM.\n"
"BASIC level -> reduced functionality, best for beginner's.\n"
"ADVANCED level -> full functionality.\n"
"\n"
"The choice here will influence the parameters in\n"
"the Selected Tab for all kinds of FlatCAM objects."
msgstr ""
"Choose the default level of usage for FlatCAM.\n"
"BASIC level -> reduced functionality, best for beginner's.\n"
"ADVANCED level -> full functionality.\n"
"\n"
"The choice here will influence the parameters in\n"
"the Selected Tab for all kinds of FlatCAM objects."

#: appGUI/preferences/general/GeneralAppPrefGroupUI.py:105
#: appObjects/FlatCAMExcellon.py:163 appObjects/FlatCAMGeometry.py:581
#: appObjects/FlatCAMGerber.py:175 appTools/ToolDrilling.py:310
#: appTools/ToolIsolation.py:268 appTools/ToolMilling.py:305
msgid "Advanced"
msgstr "Advanced"

#: appGUI/preferences/general/GeneralAppPrefGroupUI.py:111
msgid "Portable app"
msgstr "Portable app"

#: appGUI/preferences/general/GeneralAppPrefGroupUI.py:112
msgid ""
"Choose if the application should run as portable.\n"
"\n"
"If Checked the application will run portable,\n"
"which means that the preferences files will be saved\n"
"in the application folder, in the lib\\config subfolder."
msgstr ""
"Choose if the application should run as portable.\n"
"\n"
"If Checked the application will run portable,\n"
"which means that the preferences files will be saved\n"
"in the application folder, in the lib\\config subfolder."

#: appGUI/preferences/general/GeneralAppPrefGroupUI.py:125
msgid "Languages"
msgstr "Languages"

#: appGUI/preferences/general/GeneralAppPrefGroupUI.py:126
msgid "Set the language used throughout FlatCAM."
msgstr "Set the language used throughout FlatCAM."

#: appGUI/preferences/general/GeneralAppPrefGroupUI.py:132
msgid "Apply Language"
msgstr "Apply Language"

#: appGUI/preferences/general/GeneralAppPrefGroupUI.py:133
msgid ""
"Set the language used throughout FlatCAM.\n"
"The app will restart after click."
msgstr ""
"Set the language used throughout FlatCAM.\n"
"The app will restart after click."

#: appGUI/preferences/general/GeneralAppPrefGroupUI.py:147
msgid "Startup Settings"
msgstr "Startup Settings"

#: appGUI/preferences/general/GeneralAppPrefGroupUI.py:151
msgid "Splash Screen"
msgstr "Splash Screen"

#: appGUI/preferences/general/GeneralAppPrefGroupUI.py:153
msgid "Enable display of the splash screen at application startup."
msgstr "Enable display of the splash screen at application startup."

#: appGUI/preferences/general/GeneralAppPrefGroupUI.py:165
msgid "Sys Tray Icon"
msgstr "Sys Tray Icon"

#: appGUI/preferences/general/GeneralAppPrefGroupUI.py:167
msgid "Enable display of FlatCAM icon in Sys Tray."
msgstr "Enable display of FlatCAM icon in Sys Tray."

#: appGUI/preferences/general/GeneralAppPrefGroupUI.py:172
msgid "Show Shell"
msgstr "Show Shell"

#: appGUI/preferences/general/GeneralAppPrefGroupUI.py:174
msgid ""
"Check this box if you want the shell to\n"
"start automatically at startup."
msgstr ""
"Check this box if you want the shell to\n"
"start automatically at startup."

#: appGUI/preferences/general/GeneralAppPrefGroupUI.py:181
msgid "Show Project"
msgstr "Show Project"

#: appGUI/preferences/general/GeneralAppPrefGroupUI.py:183
msgid ""
"Check this box if you want the project/selected/tool tab area to\n"
"to be shown automatically at startup."
msgstr ""
"Check this box if you want the project/selected/tool tab area to\n"
"to be shown automatically at startup."

#: appGUI/preferences/general/GeneralAppPrefGroupUI.py:189
msgid "Version Check"
msgstr "Version Check"

#: appGUI/preferences/general/GeneralAppPrefGroupUI.py:191
msgid ""
"Check this box if you want to check\n"
"for a new version automatically at startup."
msgstr ""
"Check this box if you want to check\n"
"for a new version automatically at startup."

#: appGUI/preferences/general/GeneralAppPrefGroupUI.py:198
msgid "Send Statistics"
msgstr "Send Statistics"

#: appGUI/preferences/general/GeneralAppPrefGroupUI.py:200
msgid ""
"Check this box if you agree to send anonymous\n"
"stats automatically at startup, to help improve FlatCAM."
msgstr ""
"Check this box if you agree to send anonymous\n"
"stats automatically at startup, to help improve FlatCAM."

#: appGUI/preferences/general/GeneralAppPrefGroupUI.py:214
msgid "Workers number"
msgstr "Workers number"

#: appGUI/preferences/general/GeneralAppPrefGroupUI.py:216
msgid ""
"The number of Qthreads made available to the App.\n"
"A bigger number may finish the jobs more quickly but\n"
"depending on your computer speed, may make the App\n"
"unresponsive. Can have a value between 2 and 16.\n"
"Default value is 2.\n"
"After change, it will be applied at next App start."
msgstr ""
"The number of Qthreads made available to the App.\n"
"A bigger number may finish the jobs more quickly but\n"
"depending on your computer speed, may make the App\n"
"unresponsive. Can have a value between 2 and 16.\n"
"Default value is 2.\n"
"After change, it will be applied at next App start."

#: appGUI/preferences/general/GeneralAppPrefGroupUI.py:230
msgid "Geo Tolerance"
msgstr "Geo Tolerance"

#: appGUI/preferences/general/GeneralAppPrefGroupUI.py:232
msgid ""
"This value can counter the effect of the Circle Steps\n"
"parameter. Default value is 0.005.\n"
"A lower value will increase the detail both in image\n"
"and in Gcode for the circles, with a higher cost in\n"
"performance. Higher value will provide more\n"
"performance at the expense of level of detail."
msgstr ""
"This value can counter the effect of the Circle Steps\n"
"parameter. Default value is 0.005.\n"
"A lower value will increase the detail both in image\n"
"and in Gcode for the circles, with a higher cost in\n"
"performance. Higher value will provide more\n"
"performance at the expense of level of detail."

#: appGUI/preferences/general/GeneralAppPrefGroupUI.py:252
msgid "Save Settings"
msgstr "Save Settings"

#: appGUI/preferences/general/GeneralAppPrefGroupUI.py:256
msgid "Save Compressed Project"
msgstr "Save Compressed Project"

#: appGUI/preferences/general/GeneralAppPrefGroupUI.py:258
msgid ""
"Whether to save a compressed or uncompressed project.\n"
"When checked it will save a compressed FlatCAM project."
msgstr ""
"Whether to save a compressed or uncompressed project.\n"
"When checked it will save a compressed FlatCAM project."

#: appGUI/preferences/general/GeneralAppPrefGroupUI.py:267
msgid "Compression"
msgstr "Compression"

#: appGUI/preferences/general/GeneralAppPrefGroupUI.py:269
msgid ""
"The level of compression used when saving\n"
"a FlatCAM project. Higher value means better compression\n"
"but require more RAM usage and more processing time."
msgstr ""
"The level of compression used when saving\n"
"a FlatCAM project. Higher value means better compression\n"
"but require more RAM usage and more processing time."

#: appGUI/preferences/general/GeneralAppPrefGroupUI.py:280
msgid "Enable Auto Save"
msgstr "Enable Auto Save"

#: appGUI/preferences/general/GeneralAppPrefGroupUI.py:282
msgid ""
"Check to enable the autosave feature.\n"
"When enabled, the application will try to save a project\n"
"at the set interval."
msgstr ""
"Check to enable the autosave feature.\n"
"When enabled, the application will try to save a project\n"
"at the set interval."

#: appGUI/preferences/general/GeneralAppPrefGroupUI.py:292
msgid "Interval"
msgstr "Interval"

#: appGUI/preferences/general/GeneralAppPrefGroupUI.py:294
msgid ""
"Time interval for autosaving. In milliseconds.\n"
"The application will try to save periodically but only\n"
"if the project was saved manually at least once.\n"
"While active, some operations may block this feature."
msgstr ""
"Time interval for autosaving. In milliseconds.\n"
"The application will try to save periodically but only\n"
"if the project was saved manually at least once.\n"
"While active, some operations may block this feature."

#: appGUI/preferences/general/GeneralAppPrefGroupUI.py:310
msgid "Text to PDF parameters"
msgstr "Text to PDF parameters"

#: appGUI/preferences/general/GeneralAppPrefGroupUI.py:312
msgid "Used when saving text in Code Editor or in FlatCAM Document objects."
msgstr "Used when saving text in Code Editor or in FlatCAM Document objects."

#: appGUI/preferences/general/GeneralAppPrefGroupUI.py:321
msgid "Top Margin"
msgstr "Top Margin"

#: appGUI/preferences/general/GeneralAppPrefGroupUI.py:323
msgid "Distance between text body and the top of the PDF file."
msgstr "Distance between text body and the top of the PDF file."

#: appGUI/preferences/general/GeneralAppPrefGroupUI.py:334
msgid "Bottom Margin"
msgstr "Bottom Margin"

#: appGUI/preferences/general/GeneralAppPrefGroupUI.py:336
msgid "Distance between text body and the bottom of the PDF file."
msgstr "Distance between text body and the bottom of the PDF file."

#: appGUI/preferences/general/GeneralAppPrefGroupUI.py:347
msgid "Left Margin"
msgstr "Left Margin"

#: appGUI/preferences/general/GeneralAppPrefGroupUI.py:349
msgid "Distance between text body and the left of the PDF file."
msgstr "Distance between text body and the left of the PDF file."

#: appGUI/preferences/general/GeneralAppPrefGroupUI.py:360
msgid "Right Margin"
msgstr "Right Margin"

#: appGUI/preferences/general/GeneralAppPrefGroupUI.py:362
msgid "Distance between text body and the right of the PDF file."
msgstr "Distance between text body and the right of the PDF file."

#: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:26
msgid "GUI Preferences"
msgstr "GUI Preferences"

#: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:36
msgid "Theme"
msgstr "Theme"

#: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:38
msgid ""
"Select a theme for the application.\n"
"It will theme the plot area."
msgstr ""
"Select a theme for the application.\n"
"It will theme the plot area."

#: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:43
msgid "Light"
msgstr "Light"

#: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:44
msgid "Dark"
msgstr "Dark"

#: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:51
msgid "Use Gray Icons"
msgstr "Use Gray Icons"

#: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:53
msgid ""
"Check this box to use a set of icons with\n"
"a lighter (gray) color. To be used when a\n"
"full dark theme is applied."
msgstr ""
"Check this box to use a set of icons with\n"
"a lighter (gray) color. To be used when a\n"
"full dark theme is applied."

#: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:73
msgid "Layout"
msgstr "Layout"

#: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:75
msgid ""
"Select a layout for the application.\n"
"It is applied immediately."
msgstr ""
"Select a layout for the application.\n"
"It is applied immediately."

#: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:95
msgid "Style"
msgstr "Style"

#: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:97
msgid ""
"Select a style for the application.\n"
"It will be applied at the next app start."
msgstr ""
"Select a style for the application.\n"
"It will be applied at the next app start."

#: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:111
#, fuzzy
#| msgid "Activate HDPI Support"
msgid "HDPI Support"
msgstr "Activate HDPI Support"

#: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:113
msgid ""
"Enable High DPI support for the application.\n"
"It will be applied at the next app start."
msgstr ""
"Enable High DPI support for the application.\n"
"It will be applied at the next app start."

#: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:127
#, fuzzy
#| msgid "Convex Shape"
msgid "Hover Shape"
msgstr "Convex Shape"

#: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:129
msgid ""
"Enable display of a hover shape for the application objects.\n"
"It is displayed whenever the mouse cursor is hovering\n"
"over any kind of not-selected object."
msgstr ""
"Enable display of a hover shape for the application objects.\n"
"It is displayed whenever the mouse cursor is hovering\n"
"over any kind of not-selected object."

#: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:136
#, fuzzy
#| msgid "Display Selection Shape"
msgid "Selection Shape"
msgstr "Display Selection Shape"

#: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:138
msgid ""
"Enable the display of a selection shape for the application objects.\n"
"It is displayed whenever the mouse selects an object\n"
"either by clicking or dragging mouse from left to right or\n"
"right to left."
msgstr ""
"Enable the display of a selection shape for the application objects.\n"
"It is displayed whenever the mouse selects an object\n"
"either by clicking or dragging mouse from left to right or\n"
"right to left."

#: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:151
msgid "Left-Right Selection Color"
msgstr "Left-Right Selection Color"

#: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:156
msgid "Set the line color for the 'left to right' selection box."
msgstr "Set the line color for the 'left to right' selection box."

#: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:165
msgid ""
"Set the fill color for the selection box\n"
"in case that the selection is done from left to right.\n"
"First 6 digits are the color and the last 2\n"
"digits are for alpha (transparency) level."
msgstr ""
"Set the fill color for the selection box\n"
"in case that the selection is done from left to right.\n"
"First 6 digits are the color and the last 2\n"
"digits are for alpha (transparency) level."

#: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:178
msgid "Set the fill transparency for the 'left to right' selection box."
msgstr "Set the fill transparency for the 'left to right' selection box."

#: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:191
msgid "Right-Left Selection Color"
msgstr "Right-Left Selection Color"

#: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:197
msgid "Set the line color for the 'right to left' selection box."
msgstr "Set the line color for the 'right to left' selection box."

#: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:207
msgid ""
"Set the fill color for the selection box\n"
"in case that the selection is done from right to left.\n"
"First 6 digits are the color and the last 2\n"
"digits are for alpha (transparency) level."
msgstr ""
"Set the fill color for the selection box\n"
"in case that the selection is done from right to left.\n"
"First 6 digits are the color and the last 2\n"
"digits are for alpha (transparency) level."

#: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:220
msgid "Set the fill transparency for selection 'right to left' box."
msgstr "Set the fill transparency for selection 'right to left' box."

#: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:236
msgid "Editor Color"
msgstr "Editor Color"

#: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:240
msgid "Drawing"
msgstr "Drawing"

#: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:242
msgid "Set the color for the shape."
msgstr "Set the color for the shape."

#: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:252
msgid "Set the color of the shape when selected."
msgstr "Set the color of the shape when selected."

#: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:268
msgid "Project Items Color"
msgstr "Project Items Color"

#: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:272
msgid "Enabled"
msgstr "Enabled"

#: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:274
msgid "Set the color of the items in Project Tab Tree."
msgstr "Set the color of the items in Project Tab Tree."

#: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:281
msgid "Disabled"
msgstr "Disabled"

#: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:283
msgid ""
"Set the color of the items in Project Tab Tree,\n"
"for the case when the items are disabled."
msgstr ""
"Set the color of the items in Project Tab Tree,\n"
"for the case when the items are disabled."

#: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:292
msgid "Project AutoHide"
msgstr "Project AutoHide"

#: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:294
msgid ""
"Check this box if you want the project/selected/tool tab area to\n"
"hide automatically when there are no objects loaded and\n"
"to show whenever a new object is created."
msgstr ""
"Check this box if you want the project/selected/tool tab area to\n"
"hide automatically when there are no objects loaded and\n"
"to show whenever a new object is created."

#: appGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:28
msgid "Geometry Adv. Options"
msgstr "Geometry Adv. Options"

#: appGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:36
msgid ""
"A list of Geometry advanced parameters.\n"
"Those parameters are available only for\n"
"Advanced App. Level."
msgstr ""
"A list of Geometry advanced parameters.\n"
"Those parameters are available only for\n"
"Advanced App. Level."

#: appGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:46
#: appGUI/preferences/tools/Tools2CalPrefGroupUI.py:112
#: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:134
#: appTools/ToolCalibration.py:820 appTools/ToolSolderPaste.py:1312
msgid "Toolchange X-Y"
msgstr "Toolchange X-Y"

#: appGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:48
#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:298
msgid "Toolchange X,Y position."
msgstr "Toolchange X,Y position."

#: appGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:58
msgid ""
"Height of the tool just after starting the work.\n"
"Delete the value if you don't need this feature."
msgstr ""
"Height of the tool just after starting the work.\n"
"Delete the value if you don't need this feature."

#: appGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:137
#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:358
msgid "Spindle direction"
msgstr "Spindle direction"

#: appGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:139
#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:360
msgid ""
"This sets the direction that the spindle is rotating.\n"
"It can be either:\n"
"- CW = clockwise or\n"
"- CCW = counter clockwise"
msgstr ""
"This sets the direction that the spindle is rotating.\n"
"It can be either:\n"
"- CW = clockwise or\n"
"- CCW = counter clockwise"

#: appGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:151
#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:371
msgid "Fast Plunge"
msgstr "Fast Plunge"

#: appGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:153
#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:373
msgid ""
"By checking this, the vertical move from\n"
"Z_Toolchange to Z_move is done with G0,\n"
"meaning the fastest speed available.\n"
"WARNING: the move is done at Toolchange X,Y coords."
msgstr ""
"By checking this, the vertical move from\n"
"Z_Toolchange to Z_move is done with G0,\n"
"meaning the fastest speed available.\n"
"WARNING: the move is done at Toolchange X,Y coords."

#: appGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:161
msgid "Segment X size"
msgstr "Segment X size"

#: appGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:163
msgid ""
"The size of the trace segment on the X axis.\n"
"Useful for auto-leveling.\n"
"A value of 0 means no segmentation on the X axis."
msgstr ""
"The size of the trace segment on the X axis.\n"
"Useful for auto-leveling.\n"
"A value of 0 means no segmentation on the X axis."

#: appGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:177
msgid "Segment Y size"
msgstr "Segment Y size"

#: appGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:179
msgid ""
"The size of the trace segment on the Y axis.\n"
"Useful for auto-leveling.\n"
"A value of 0 means no segmentation on the Y axis."
msgstr ""
"The size of the trace segment on the Y axis.\n"
"Useful for auto-leveling.\n"
"A value of 0 means no segmentation on the Y axis."

#: appGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:200
msgid "Area Exclusion"
msgstr "Area Exclusion"

#: appGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:202
msgid ""
"Area exclusion parameters.\n"
"Those parameters are available only for\n"
"Advanced App. Level."
msgstr ""
"Area exclusion parameters.\n"
"Those parameters are available only for\n"
"Advanced App. Level."

#: appGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:209
msgid "Exclusion areas"
msgstr "Exclusion areas"

#: appGUI/preferences/geometry/GeometryEditorPrefGroupUI.py:43
#: appGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:174
msgid ""
"Set the number of selected geometry\n"
"items above which the utility geometry\n"
"becomes just a selection rectangle.\n"
"Increases the performance when moving a\n"
"large number of geometric elements."
msgstr ""
"Set the number of selected geometry\n"
"items above which the utility geometry\n"
"becomes just a selection rectangle.\n"
"Increases the performance when moving a\n"
"large number of geometric elements."

#: appGUI/preferences/geometry/GeometryEditorPrefGroupUI.py:58
msgid ""
"Milling type:\n"
"- climb / best for precision milling and to reduce tool usage\n"
"- conventional / useful when there is no backlash compensation"
msgstr ""
"Milling type:\n"
"- climb / best for precision milling and to reduce tool usage\n"
"- conventional / useful when there is no backlash compensation"

#: appGUI/preferences/geometry/GeometryGenPrefGroupUI.py:29
msgid "Geometry General"
msgstr "Geometry General"

#: appGUI/preferences/geometry/GeometryGenPrefGroupUI.py:61
msgid ""
"The number of circle steps for <b>Geometry</b> \n"
"circle and arc shapes linear approximation."
msgstr ""
"The number of circle steps for <b>Geometry</b> \n"
"circle and arc shapes linear approximation."

#: appGUI/preferences/geometry/GeometryGenPrefGroupUI.py:75
#: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:41
#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:41
#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:48
#: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:42
msgid "Tools Dia"
msgstr "Tools Dia"

#: appGUI/preferences/geometry/GeometryGenPrefGroupUI.py:77
#: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:108
#: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:43
#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:43
#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:50
#: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:44
msgid ""
"Diameters of the tools, separated by comma.\n"
"The value of the diameter has to use the dot decimals separator.\n"
"Valid values: 0.3, 1.0"
msgstr ""
"Diameters of the tools, separated by comma.\n"
"The value of the diameter has to use the dot decimals separator.\n"
"Valid values: 0.3, 1.0"

#: appGUI/preferences/geometry/GeometryGenPrefGroupUI.py:96
#, fuzzy
#| msgid ""
#| "This sets the optimization type for the Excellon drill path.\n"
#| "If <<MetaHeuristic>> is checked then Google OR-Tools algorithm with\n"
#| "MetaHeuristic Guided Local Path is used. Default search time is 3sec.\n"
#| "If <<Basic>> is checked then Google OR-Tools Basic algorithm is used.\n"
#| "If <<TSA>> is checked then Travelling Salesman algorithm is used for\n"
#| "drill path optimization.\n"
#| "\n"
#| "If this control is disabled, then FlatCAM works in 32bit mode and it "
#| "uses\n"
#| "Travelling Salesman algorithm for path optimization."
msgid ""
"This sets the path optimization algorithm.\n"
"- Rtre -> Rtree algorithm\n"
"- MetaHeuristic -> Google OR-Tools algorithm with\n"
"MetaHeuristic Guided Local Path is used. Default search time is 3sec.\n"
"- Basic -> Using Google OR-Tools Basic algorithm\n"
"- TSA -> Using Travelling Salesman algorithm\n"
"\n"
"Some options are disabled when FlatCAM works in 32bit mode."
msgstr ""
"This sets the optimization type for the Excellon drill path.\n"
"If <<MetaHeuristic>> is checked then Google OR-Tools algorithm with\n"
"MetaHeuristic Guided Local Path is used. Default search time is 3sec.\n"
"If <<Basic>> is checked then Google OR-Tools Basic algorithm is used.\n"
"If <<TSA>> is checked then Travelling Salesman algorithm is used for\n"
"drill path optimization.\n"
"\n"
"If this control is disabled, then FlatCAM works in 32bit mode and it uses\n"
"Travelling Salesman algorithm for path optimization."

#: appGUI/preferences/geometry/GeometryGenPrefGroupUI.py:108
msgid "Rtree"
msgstr ""

#: appGUI/preferences/geometry/GeometryOptPrefGroupUI.py:29
msgid "Geometry Options"
msgstr "Geometry Options"

#: appGUI/preferences/geometry/GeometryOptPrefGroupUI.py:37
msgid ""
"Create a CNC Job object\n"
"tracing the contours of this\n"
"Geometry object."
msgstr ""
"Create a CNC Job object\n"
"tracing the contours of this\n"
"Geometry object."

#: appGUI/preferences/geometry/GeometryOptPrefGroupUI.py:81
msgid "Depth/Pass"
msgstr "Depth/Pass"

#: appGUI/preferences/geometry/GeometryOptPrefGroupUI.py:83
msgid ""
"The depth to cut on each pass,\n"
"when multidepth is enabled.\n"
"It has positive value although\n"
"it is a fraction from the depth\n"
"which has negative value."
msgstr ""
"The depth to cut on each pass,\n"
"when multidepth is enabled.\n"
"It has positive value although\n"
"it is a fraction from the depth\n"
"which has negative value."

#: appGUI/preferences/geometry/GeometryOptPrefGroupUI.py:122
#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:116
#: appTools/ToolDrilling.py:2385
msgid "Tool change"
msgstr "Tool change"

#: appGUI/preferences/geometry/GeometryOptPrefGroupUI.py:233
#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:200
msgid "Enable Dwell"
msgstr "Enable Dwell"

#: appGUI/preferences/gerber/GerberAdvOptPrefGroupUI.py:27
msgid "Gerber Adv. Options"
msgstr "Gerber Adv. Options"

#: appGUI/preferences/gerber/GerberAdvOptPrefGroupUI.py:33
msgid ""
"A list of Gerber advanced parameters.\n"
"Those parameters are available only for\n"
"Advanced App. Level."
msgstr ""
"A list of Gerber advanced parameters.\n"
"Those parameters are available only for\n"
"Advanced App. Level."

#: appGUI/preferences/gerber/GerberAdvOptPrefGroupUI.py:43
msgid "\"Follow\""
msgstr "\"Follow\""

#: appGUI/preferences/gerber/GerberAdvOptPrefGroupUI.py:64
#: appObjects/FlatCAMGerber.py:350 appTools/ToolCopperThieving.py:581
#: appTools/ToolCopperThieving.py:770 appTools/ToolCopperThieving.py:782
#: appTools/ToolIsolation.py:1318 appTools/ToolNCC.py:1743
#: appTools/ToolNCC.py:1770 appTools/ToolNCC.py:1878 appTools/ToolNCC.py:1891
#: appTools/ToolNCC.py:2737 appTools/ToolNCC.py:2842 appTools/ToolNCC.py:2857
#: appTools/ToolNCC.py:3123 appTools/ToolNCC.py:3224 appTools/ToolNCC.py:3239
#: camlib.py:1062
msgid "Buffering"
msgstr "Buffering"

#: appGUI/preferences/gerber/GerberAdvOptPrefGroupUI.py:66
msgid ""
"Buffering type:\n"
"- None --> best performance, fast file loading but no so good display\n"
"- Full --> slow file loading but good visuals. This is the default.\n"
"<<WARNING>>: Don't change this unless you know what you are doing !!!"
msgstr ""
"Buffering type:\n"
"- None --> best performance, fast file loading but no so good display\n"
"- Full --> slow file loading but good visuals. This is the default.\n"
"<<WARNING>>: Don't change this unless you know what you are doing !!!"

#: appGUI/preferences/gerber/GerberAdvOptPrefGroupUI.py:71
#: appGUI/preferences/tools/Tools2FiducialsPrefGroupUI.py:88
#: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:196
#: appTools/ToolFiducials.py:815 appTools/ToolFilm.py:1102
#: appTools/ToolProperties.py:453 appTools/ToolProperties.py:456
#: appTools/ToolProperties.py:459 appTools/ToolProperties.py:487
#: appTools/ToolProperties.py:494 appTools/ToolProperties.py:497
msgid "None"
msgstr "None"

#: appGUI/preferences/gerber/GerberAdvOptPrefGroupUI.py:77
msgid "Delayed Buffering"
msgstr "Delayed Buffering"

#: appGUI/preferences/gerber/GerberAdvOptPrefGroupUI.py:79
msgid "When checked it will do the buffering in background."
msgstr "When checked it will do the buffering in background."

#: appGUI/preferences/gerber/GerberAdvOptPrefGroupUI.py:84
msgid "Simplify"
msgstr "Simplify"

#: appGUI/preferences/gerber/GerberAdvOptPrefGroupUI.py:86
msgid ""
"When checked all the Gerber polygons will be\n"
"loaded with simplification having a set tolerance.\n"
"<<WARNING>>: Don't change this unless you know what you are doing !!!"
msgstr ""
"When checked all the Gerber polygons will be\n"
"loaded with simplification having a set tolerance.\n"
"<<WARNING>>: Don't change this unless you know what you are doing !!!"

#: appGUI/preferences/gerber/GerberAdvOptPrefGroupUI.py:93
msgid "Tolerance"
msgstr "Tolerance"

#: appGUI/preferences/gerber/GerberAdvOptPrefGroupUI.py:94
msgid "Tolerance for polygon simplification."
msgstr "Tolerance for polygon simplification."

#: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:33
msgid "A list of Gerber Editor parameters."
msgstr "A list of Gerber Editor parameters."

#: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:43
msgid ""
"Set the number of selected Gerber geometry\n"
"items above which the utility geometry\n"
"becomes just a selection rectangle.\n"
"Increases the performance when moving a\n"
"large number of geometric elements."
msgstr ""
"Set the number of selected Gerber geometry\n"
"items above which the utility geometry\n"
"becomes just a selection rectangle.\n"
"Increases the performance when moving a\n"
"large number of geometric elements."

#: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:56
msgid "New Aperture code"
msgstr "New Aperture code"

#: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:69
msgid "New Aperture size"
msgstr "New Aperture size"

#: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:71
msgid "Size for the new aperture"
msgstr "Size for the new aperture"

#: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:82
msgid "New Aperture type"
msgstr "New Aperture type"

#: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:84
msgid ""
"Type for the new aperture.\n"
"Can be 'C', 'R' or 'O'."
msgstr ""
"Type for the new aperture.\n"
"Can be 'C', 'R' or 'O'."

#: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:106
msgid "Aperture Dimensions"
msgstr "Aperture Dimensions"

#: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:117
msgid "Linear Pad Array"
msgstr "Linear Pad Array"

#: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:161
msgid "Circular Pad Array"
msgstr "Circular Pad Array"

#: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:197
msgid "Distance at which to buffer the Gerber element."
msgstr "Distance at which to buffer the Gerber element."

#: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:206
msgid "Scale Tool"
msgstr "Scale Tool"

#: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:212
msgid "Factor to scale the Gerber element."
msgstr "Factor to scale the Gerber element."

#: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:225
msgid "Threshold low"
msgstr "Threshold low"

#: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:227
msgid "Threshold value under which the apertures are not marked."
msgstr "Threshold value under which the apertures are not marked."

#: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:237
msgid "Threshold high"
msgstr "Threshold high"

#: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:239
msgid "Threshold value over which the apertures are not marked."
msgstr "Threshold value over which the apertures are not marked."

#: appGUI/preferences/gerber/GerberExpPrefGroupUI.py:27
msgid "Gerber Export"
msgstr "Gerber Export"

#: appGUI/preferences/gerber/GerberExpPrefGroupUI.py:33
msgid ""
"The parameters set here are used in the file exported\n"
"when using the File -> Export -> Export Gerber menu entry."
msgstr ""
"The parameters set here are used in the file exported\n"
"when using the File -> Export -> Export Gerber menu entry."

#: appGUI/preferences/gerber/GerberExpPrefGroupUI.py:44
#: appGUI/preferences/gerber/GerberExpPrefGroupUI.py:50
#: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:84
#: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:90
msgid "The units used in the Gerber file."
msgstr "The units used in the Gerber file."

#: appGUI/preferences/gerber/GerberExpPrefGroupUI.py:58
msgid ""
"The number of digits in the whole part of the number\n"
"and in the fractional part of the number."
msgstr ""
"The number of digits in the whole part of the number\n"
"and in the fractional part of the number."

#: appGUI/preferences/gerber/GerberExpPrefGroupUI.py:71
msgid ""
"This numbers signify the number of digits in\n"
"the whole part of Gerber coordinates."
msgstr ""
"This numbers signify the number of digits in\n"
"the whole part of Gerber coordinates."

#: appGUI/preferences/gerber/GerberExpPrefGroupUI.py:87
msgid ""
"This numbers signify the number of digits in\n"
"the decimal part of Gerber coordinates."
msgstr ""
"This numbers signify the number of digits in\n"
"the decimal part of Gerber coordinates."

#: appGUI/preferences/gerber/GerberExpPrefGroupUI.py:99
#: appGUI/preferences/gerber/GerberExpPrefGroupUI.py:109
#: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:100
#: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:110
msgid ""
"This sets the type of Gerber zeros.\n"
"If LZ then Leading Zeros are removed and\n"
"Trailing Zeros are kept.\n"
"If TZ is checked then Trailing Zeros are removed\n"
"and Leading Zeros are kept."
msgstr ""
"This sets the type of Gerber zeros.\n"
"If LZ then Leading Zeros are removed and\n"
"Trailing Zeros are kept.\n"
"If TZ is checked then Trailing Zeros are removed\n"
"and Leading Zeros are kept."

#: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:27
msgid "Gerber General"
msgstr "Gerber General"

#: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:61
msgid ""
"The number of circle steps for Gerber \n"
"circular aperture linear approximation."
msgstr ""
"The number of circle steps for Gerber \n"
"circular aperture linear approximation."

#: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:73
msgid "Default Values"
msgstr "Default Values"

#: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:75
msgid ""
"Those values will be used as fallback values\n"
"in case that they are not found in the Gerber file."
msgstr ""
"Those values will be used as fallback values\n"
"in case that they are not found in the Gerber file."

#: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:126
msgid "Clean Apertures"
msgstr "Clean Apertures"

#: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:128
msgid ""
"Will remove apertures that do not have geometry\n"
"thus lowering the number of apertures in the Gerber object."
msgstr ""
"Will remove apertures that do not have geometry\n"
"thus lowering the number of apertures in the Gerber object."

#: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:134
msgid "Polarity change buffer"
msgstr "Polarity change buffer"

#: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:136
msgid ""
"Will apply extra buffering for the\n"
"solid geometry when we have polarity changes.\n"
"May help loading Gerber files that otherwise\n"
"do not load correctly."
msgstr ""
"Will apply extra buffering for the\n"
"solid geometry when we have polarity changes.\n"
"May help loading Gerber files that otherwise\n"
"do not load correctly."

#: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:144
#, fuzzy
#| msgid "Set Color"
msgid "Store colors"
msgstr "Set Color"

#: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:146
msgid ""
"It will store the set colors for Gerber objects.\n"
"Those will be used each time the application is started."
msgstr ""

#: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:152
#, fuzzy
#| msgid "Clear Plot"
msgid "Clear Colors"
msgstr "Clear Plot"

#: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:155
#, fuzzy
#| msgid "Set the color for plotted objects."
msgid "Reset the colors associated with Gerber objects."
msgstr "Set the color for plotted objects."

#: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:229
#, fuzzy
#| msgid "There is no Gerber object loaded ..."
msgid "Stored colors for Gerber objects are deleted."
msgstr "There is no Gerber object loaded ..."

#: appGUI/preferences/gerber/GerberOptPrefGroupUI.py:29
msgid "Gerber Options"
msgstr "Gerber Options"

#: appGUI/preferences/gerber/GerberOptPrefGroupUI.py:61
#: appGUI/preferences/gerber/GerberOptPrefGroupUI.py:92
msgid "Rounded Geo"
msgstr "Rounded Geo"

#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:27
msgid "Copper Thieving Tool Options"
msgstr "Copper Thieving Tool Options"

#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:39
msgid ""
"A tool to generate a Copper Thieving that can be added\n"
"to a selected Gerber file."
msgstr ""
"A tool to generate a Copper Thieving that can be added\n"
"to a selected Gerber file."

#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:47
msgid "Number of steps (lines) used to interpolate circles."
msgstr "Number of steps (lines) used to interpolate circles."

#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:57
#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:261
#: appTools/ToolCopperThieving.py:1189 appTools/ToolCopperThieving.py:1524
msgid "Clearance"
msgstr "Clearance"

#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:59
msgid ""
"This set the distance between the copper Thieving components\n"
"(the polygon fill may be split in multiple polygons)\n"
"and the copper traces in the Gerber file."
msgstr ""
"This set the distance between the copper Thieving components\n"
"(the polygon fill may be split in multiple polygons)\n"
"and the copper traces in the Gerber file."

#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:86
#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:309
#: appTools/ToolCopperThieving.py:1218 appTools/ToolNCC.py:1301
#: appTools/ToolNCC.py:1617 appTools/ToolNCC.py:1681 appTools/ToolNCC.py:2601
#: appTools/ToolNCC.py:2610 appTools/ToolNCC.py:4192 appTools/ToolNCC.py:4318
#: defaults.py:469 tclCommands/TclCommandCopperClear.py:190
msgid "Itself"
msgstr "Itself"

#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:87
#: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:285
#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:309
#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:280
#: appTools/ToolCopperThieving.py:1219 appTools/ToolIsolation.py:813
#: appTools/ToolIsolation.py:1397 appTools/ToolIsolation.py:3330
#: appTools/ToolNCC.py:1315 appTools/ToolNCC.py:1633 appTools/ToolNCC.py:1688
#: appTools/ToolNCC.py:4192 appTools/ToolNCC.py:4328 appTools/ToolPaint.py:1060
#: appTools/ToolPaint.py:3126 appTools/ToolPaint.py:3248
msgid "Area Selection"
msgstr "Area Selection"

#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:88
#: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:285
#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:309
#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:280
#: appTools/ToolCopperThieving.py:1220 appTools/ToolDblSided.py:764
#: appTools/ToolIsolation.py:1437 appTools/ToolIsolation.py:3330
#: appTools/ToolNCC.py:1334 appTools/ToolNCC.py:1639 appTools/ToolNCC.py:1696
#: appTools/ToolNCC.py:2074 appTools/ToolNCC.py:2308 appTools/ToolNCC.py:2646
#: appTools/ToolNCC.py:4192 appTools/ToolPaint.py:1079
#: appTools/ToolPaint.py:3126 appTools/ToolPaint.py:3231
#: tclCommands/TclCommandCopperClear.py:192 tclCommands/TclCommandPaint.py:166
msgid "Reference Object"
msgstr "Reference Object"

#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:90
#: appTools/ToolCopperThieving.py:1222
msgid "Reference:"
msgstr "Reference:"

#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:92
msgid ""
"- 'Itself' - the copper Thieving extent is based on the object extent.\n"
"- 'Area Selection' - left mouse click to start selection of the area to be "
"filled.\n"
"- 'Reference Object' - will do copper thieving within the area specified by "
"another object."
msgstr ""
"- 'Itself' - the copper Thieving extent is based on the object extent.\n"
"- 'Area Selection' - left mouse click to start selection of the area to be "
"filled.\n"
"- 'Reference Object' - will do copper thieving within the area specified by "
"another object."

#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:101
#: appGUI/preferences/tools/Tools2EDrillsPrefGroupUI.py:76
#: appGUI/preferences/tools/Tools2EDrillsPrefGroupUI.py:188
#: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:76
#: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:190
#: appTools/ToolCopperThieving.py:1264 appTools/ToolExtractDrills.py:494
#: appTools/ToolExtractDrills.py:632 appTools/ToolPunchGerber.py:767
#: appTools/ToolPunchGerber.py:922
msgid "Rectangular"
msgstr "Rectangular"

#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:102
#: appTools/ToolCopperThieving.py:1265
msgid "Minimal"
msgstr "Minimal"

#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:104
#: appTools/ToolCopperThieving.py:1267 appTools/ToolFilm.py:954
msgid "Box Type:"
msgstr "Box Type:"

#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:106
#: appTools/ToolCopperThieving.py:1269
msgid ""
"- 'Rectangular' - the bounding box will be of rectangular shape.\n"
"- 'Minimal' - the bounding box will be the convex hull shape."
msgstr ""
"- 'Rectangular' - the bounding box will be of rectangular shape.\n"
"- 'Minimal' - the bounding box will be the convex hull shape."

#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:120
#: appTools/ToolCopperThieving.py:1285
msgid "Dots Grid"
msgstr "Dots Grid"

#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:121
#: appTools/ToolCopperThieving.py:1286
msgid "Squares Grid"
msgstr "Squares Grid"

#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:122
#: appTools/ToolCopperThieving.py:1287
msgid "Lines Grid"
msgstr "Lines Grid"

#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:124
#: appTools/ToolCopperThieving.py:1289
msgid "Fill Type:"
msgstr "Fill Type:"

#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:126
#: appTools/ToolCopperThieving.py:1291
msgid ""
"- 'Solid' - copper thieving will be a solid polygon.\n"
"- 'Dots Grid' - the empty area will be filled with a pattern of dots.\n"
"- 'Squares Grid' - the empty area will be filled with a pattern of squares.\n"
"- 'Lines Grid' - the empty area will be filled with a pattern of lines."
msgstr ""
"- 'Solid' - copper thieving will be a solid polygon.\n"
"- 'Dots Grid' - the empty area will be filled with a pattern of dots.\n"
"- 'Squares Grid' - the empty area will be filled with a pattern of squares.\n"
"- 'Lines Grid' - the empty area will be filled with a pattern of lines."

#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:134
#: appTools/ToolCopperThieving.py:1310
msgid "Dots Grid Parameters"
msgstr "Dots Grid Parameters"

#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:140
#: appTools/ToolCopperThieving.py:1316
msgid "Dot diameter in Dots Grid."
msgstr "Dot diameter in Dots Grid."

#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:153
#: appTools/ToolCopperThieving.py:1329
msgid "Distance between each two dots in Dots Grid."
msgstr "Distance between each two dots in Dots Grid."

#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:163
#: appTools/ToolCopperThieving.py:1350
msgid "Squares Grid Parameters"
msgstr "Squares Grid Parameters"

#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:169
#: appTools/ToolCopperThieving.py:1356
msgid "Square side size in Squares Grid."
msgstr "Square side size in Squares Grid."

#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:182
#: appTools/ToolCopperThieving.py:1369
msgid "Distance between each two squares in Squares Grid."
msgstr "Distance between each two squares in Squares Grid."

#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:192
#: appTools/ToolCopperThieving.py:1390
msgid "Lines Grid Parameters"
msgstr "Lines Grid Parameters"

#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:198
#: appTools/ToolCopperThieving.py:1396
msgid "Line thickness size in Lines Grid."
msgstr "Line thickness size in Lines Grid."

#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:211
#: appTools/ToolCopperThieving.py:1409
msgid "Distance between each two lines in Lines Grid."
msgstr "Distance between each two lines in Lines Grid."

#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:221
#: appTools/ToolCopperThieving.py:1447
msgid "Robber Bar Parameters"
msgstr "Robber Bar Parameters"

#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:223
#: appTools/ToolCopperThieving.py:1449
msgid ""
"Parameters used for the robber bar.\n"
"Robber bar = copper border to help in pattern hole plating."
msgstr ""
"Parameters used for the robber bar.\n"
"Robber bar = copper border to help in pattern hole plating."

#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:231
#: appTools/ToolCopperThieving.py:1457
msgid "Bounding box margin for robber bar."
msgstr "Bounding box margin for robber bar."

#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:242
#: appGUI/preferences/tools/ToolsCornersPrefGroupUI.py:42
#: appTools/ToolCopperThieving.py:1468 appTools/ToolCorners.py:384
#: appTools/ToolEtchCompensation.py:370
msgid "Thickness"
msgstr "Thickness"

#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:244
#: appTools/ToolCopperThieving.py:1470
msgid "The robber bar thickness."
msgstr "The robber bar thickness."

#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:254
#: appTools/ToolCopperThieving.py:1501
msgid "Pattern Plating Mask"
msgstr "Pattern Plating Mask"

#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:256
#: appTools/ToolCopperThieving.py:1503
msgid "Generate a mask for pattern plating."
msgstr "Generate a mask for pattern plating."

#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:263
#: appTools/ToolCopperThieving.py:1526
msgid ""
"The distance between the possible copper thieving elements\n"
"and/or robber bar and the actual openings in the mask."
msgstr ""
"The distance between the possible copper thieving elements\n"
"and/or robber bar and the actual openings in the mask."

#: appGUI/preferences/tools/Tools2CalPrefGroupUI.py:27
msgid "Calibration Tool Options"
msgstr "Calibration Tool Options"

#: appGUI/preferences/tools/Tools2CalPrefGroupUI.py:38
#: appGUI/preferences/tools/Tools2EDrillsPrefGroupUI.py:38
#: appGUI/preferences/tools/Tools2FiducialsPrefGroupUI.py:38
#: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:38
#: appGUI/preferences/tools/ToolsCornersPrefGroupUI.py:37
#: appTools/ToolCopperThieving.py:1184 appTools/ToolCorners.py:379
#: appTools/ToolFiducials.py:765
msgid "Parameters used for this tool."
msgstr "Parameters used for this tool."

#: appGUI/preferences/tools/Tools2CalPrefGroupUI.py:43
#: appTools/ToolCalibration.py:876
msgid "Source Type"
msgstr "Source Type"

#: appGUI/preferences/tools/Tools2CalPrefGroupUI.py:44
#: appTools/ToolCalibration.py:877
msgid ""
"The source of calibration points.\n"
"It can be:\n"
"- Object -> click a hole geo for Excellon or a pad for Gerber\n"
"- Free -> click freely on canvas to acquire the calibration points"
msgstr ""
"The source of calibration points.\n"
"It can be:\n"
"- Object -> click a hole geo for Excellon or a pad for Gerber\n"
"- Free -> click freely on canvas to acquire the calibration points"

#: appGUI/preferences/tools/Tools2CalPrefGroupUI.py:49
#: appTools/ToolCalibration.py:882
msgid "Free"
msgstr "Free"

#: appGUI/preferences/tools/Tools2CalPrefGroupUI.py:63
#: appTools/ToolCalibration.py:771
msgid "Height (Z) for travelling between the points."
msgstr "Height (Z) for travelling between the points."

#: appGUI/preferences/tools/Tools2CalPrefGroupUI.py:75
#: appTools/ToolCalibration.py:783
msgid "Verification Z"
msgstr "Verification Z"

#: appGUI/preferences/tools/Tools2CalPrefGroupUI.py:77
#: appTools/ToolCalibration.py:785
msgid "Height (Z) for checking the point."
msgstr "Height (Z) for checking the point."

#: appGUI/preferences/tools/Tools2CalPrefGroupUI.py:89
#: appTools/ToolCalibration.py:797
msgid "Zero Z tool"
msgstr "Zero Z tool"

#: appGUI/preferences/tools/Tools2CalPrefGroupUI.py:91
#: appTools/ToolCalibration.py:799
msgid ""
"Include a sequence to zero the height (Z)\n"
"of the verification tool."
msgstr ""
"Include a sequence to zero the height (Z)\n"
"of the verification tool."

#: appGUI/preferences/tools/Tools2CalPrefGroupUI.py:100
#: appTools/ToolCalibration.py:808
msgid "Height (Z) for mounting the verification probe."
msgstr "Height (Z) for mounting the verification probe."

#: appGUI/preferences/tools/Tools2CalPrefGroupUI.py:114
#: appTools/ToolCalibration.py:822
msgid ""
"Toolchange X,Y position.\n"
"If no value is entered then the current\n"
"(x, y) point will be used,"
msgstr ""
"Toolchange X,Y position.\n"
"If no value is entered then the current\n"
"(x, y) point will be used,"

#: appGUI/preferences/tools/Tools2CalPrefGroupUI.py:125
#: appTools/ToolCalibration.py:848
msgid "Second point"
msgstr "Second point"

#: appGUI/preferences/tools/Tools2CalPrefGroupUI.py:127
#: appTools/ToolCalibration.py:850
msgid ""
"Second point in the Gcode verification can be:\n"
"- top-left -> the user will align the PCB vertically\n"
"- bottom-right -> the user will align the PCB horizontally"
msgstr ""
"Second point in the Gcode verification can be:\n"
"- top-left -> the user will align the PCB vertically\n"
"- bottom-right -> the user will align the PCB horizontally"

#: appGUI/preferences/tools/Tools2CalPrefGroupUI.py:131
#: appTools/ToolCalibration.py:854 app_Main.py:4990
msgid "Top-Left"
msgstr "Top-Left"

#: appGUI/preferences/tools/Tools2CalPrefGroupUI.py:132
#: appTools/ToolCalibration.py:855 app_Main.py:4991
msgid "Bottom-Right"
msgstr "Bottom-Right"

#: appGUI/preferences/tools/Tools2EDrillsPrefGroupUI.py:27
msgid "Extract Drills Options"
msgstr "Extract Drills Options"

#: appGUI/preferences/tools/Tools2EDrillsPrefGroupUI.py:42
#: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:42
#: appTools/ToolExtractDrills.py:460 appTools/ToolPunchGerber.py:729
msgid "Processed Pads Type"
msgstr "Processed Pads Type"

#: appGUI/preferences/tools/Tools2EDrillsPrefGroupUI.py:44
#: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:44
#: appTools/ToolExtractDrills.py:462 appTools/ToolPunchGerber.py:731
msgid ""
"The type of pads shape to be processed.\n"
"If the PCB has many SMD pads with rectangular pads,\n"
"disable the Rectangular aperture."
msgstr ""
"The type of pads shape to be processed.\n"
"If the PCB has many SMD pads with rectangular pads,\n"
"disable the Rectangular aperture."

#: appGUI/preferences/tools/Tools2EDrillsPrefGroupUI.py:54
#: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:54
#: appTools/ToolExtractDrills.py:472 appTools/ToolPunchGerber.py:745
msgid "Process Circular Pads."
msgstr "Process Circular Pads."

#: appGUI/preferences/tools/Tools2EDrillsPrefGroupUI.py:60
#: appGUI/preferences/tools/Tools2EDrillsPrefGroupUI.py:162
#: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:60
#: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:164
#: appTools/ToolExtractDrills.py:478 appTools/ToolExtractDrills.py:606
#: appTools/ToolPunchGerber.py:751 appTools/ToolPunchGerber.py:896
msgid "Oblong"
msgstr "Oblong"

#: appGUI/preferences/tools/Tools2EDrillsPrefGroupUI.py:62
#: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:62
#: appTools/ToolExtractDrills.py:480 appTools/ToolPunchGerber.py:753
msgid "Process Oblong Pads."
msgstr "Process Oblong Pads."

#: appGUI/preferences/tools/Tools2EDrillsPrefGroupUI.py:70
#: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:70
#: appTools/ToolExtractDrills.py:488 appTools/ToolPunchGerber.py:761
msgid "Process Square Pads."
msgstr "Process Square Pads."

#: appGUI/preferences/tools/Tools2EDrillsPrefGroupUI.py:78
#: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:78
#: appTools/ToolExtractDrills.py:496 appTools/ToolPunchGerber.py:769
msgid "Process Rectangular Pads."
msgstr "Process Rectangular Pads."

#: appGUI/preferences/tools/Tools2EDrillsPrefGroupUI.py:84
#: appGUI/preferences/tools/Tools2EDrillsPrefGroupUI.py:201
#: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:84
#: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:203
#: appTools/ToolExtractDrills.py:502 appTools/ToolExtractDrills.py:645
#: appTools/ToolProperties.py:175 appTools/ToolPunchGerber.py:775
#: appTools/ToolPunchGerber.py:935
msgid "Others"
msgstr "Others"

#: appGUI/preferences/tools/Tools2EDrillsPrefGroupUI.py:86
#: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:86
#: appTools/ToolExtractDrills.py:504 appTools/ToolPunchGerber.py:777
msgid "Process pads not in the categories above."
msgstr "Process pads not in the categories above."

#: appGUI/preferences/tools/Tools2EDrillsPrefGroupUI.py:99
#: appGUI/preferences/tools/Tools2EDrillsPrefGroupUI.py:123
#: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:100
#: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:125
#: appTools/ToolExtractDrills.py:531 appTools/ToolExtractDrills.py:548
#: appTools/ToolPunchGerber.py:804 appTools/ToolPunchGerber.py:838
msgid "Fixed Diameter"
msgstr "Fixed Diameter"

#: appGUI/preferences/tools/Tools2EDrillsPrefGroupUI.py:100
#: appGUI/preferences/tools/Tools2EDrillsPrefGroupUI.py:140
#: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:101
#: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:142
#: appTools/ToolExtractDrills.py:532 appTools/ToolExtractDrills.py:584
#: appTools/ToolPunchGerber.py:805 appTools/ToolPunchGerber.py:868
msgid "Fixed Annular Ring"
msgstr "Fixed Annular Ring"

#: appGUI/preferences/tools/Tools2EDrillsPrefGroupUI.py:101
#: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:102
#: appTools/ToolExtractDrills.py:533 appTools/ToolPunchGerber.py:806
msgid "Proportional"
msgstr "Proportional"

#: appGUI/preferences/tools/Tools2EDrillsPrefGroupUI.py:107
#: appTools/ToolExtractDrills.py:522
msgid ""
"The method for processing pads. Can be:\n"
"- Fixed Diameter -> all holes will have a set size\n"
"- Fixed Annular Ring -> all holes will have a set annular ring\n"
"- Proportional -> each hole size will be a fraction of the pad size"
msgstr ""
"The method for processing pads. Can be:\n"
"- Fixed Diameter -> all holes will have a set size\n"
"- Fixed Annular Ring -> all holes will have a set annular ring\n"
"- Proportional -> each hole size will be a fraction of the pad size"

#: appGUI/preferences/tools/Tools2EDrillsPrefGroupUI.py:133
#: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:135
#: appTools/ToolExtractDrills.py:558 appTools/ToolPunchGerber.py:848
msgid "Fixed hole diameter."
msgstr "Fixed hole diameter."

#: appGUI/preferences/tools/Tools2EDrillsPrefGroupUI.py:142
#: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:144
#: appTools/ToolExtractDrills.py:586 appTools/ToolPunchGerber.py:870
msgid ""
"The size of annular ring.\n"
"The copper sliver between the hole exterior\n"
"and the margin of the copper pad."
msgstr ""
"The size of annular ring.\n"
"The copper sliver between the hole exterior\n"
"and the margin of the copper pad."

#: appGUI/preferences/tools/Tools2EDrillsPrefGroupUI.py:151
#: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:153
#: appTools/ToolExtractDrills.py:595 appTools/ToolPunchGerber.py:885
msgid "The size of annular ring for circular pads."
msgstr "The size of annular ring for circular pads."

#: appGUI/preferences/tools/Tools2EDrillsPrefGroupUI.py:164
#: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:166
#: appTools/ToolExtractDrills.py:608 appTools/ToolPunchGerber.py:898
msgid "The size of annular ring for oblong pads."
msgstr "The size of annular ring for oblong pads."

#: appGUI/preferences/tools/Tools2EDrillsPrefGroupUI.py:177
#: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:179
#: appTools/ToolExtractDrills.py:621 appTools/ToolPunchGerber.py:911
msgid "The size of annular ring for square pads."
msgstr "The size of annular ring for square pads."

#: appGUI/preferences/tools/Tools2EDrillsPrefGroupUI.py:190
#: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:192
#: appTools/ToolExtractDrills.py:634 appTools/ToolPunchGerber.py:924
msgid "The size of annular ring for rectangular pads."
msgstr "The size of annular ring for rectangular pads."

#: appGUI/preferences/tools/Tools2EDrillsPrefGroupUI.py:203
#: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:205
#: appTools/ToolExtractDrills.py:647 appTools/ToolPunchGerber.py:937
msgid "The size of annular ring for other pads."
msgstr "The size of annular ring for other pads."

#: appGUI/preferences/tools/Tools2EDrillsPrefGroupUI.py:213
#: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:215
#: appTools/ToolExtractDrills.py:668 appTools/ToolPunchGerber.py:953
msgid "Proportional Diameter"
msgstr "Proportional Diameter"

#: appGUI/preferences/tools/Tools2EDrillsPrefGroupUI.py:222
#: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:224
msgid "Factor"
msgstr "Factor"

#: appGUI/preferences/tools/Tools2EDrillsPrefGroupUI.py:224
#: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:226
#: appTools/ToolExtractDrills.py:679 appTools/ToolPunchGerber.py:964
msgid ""
"Proportional Diameter.\n"
"The hole diameter will be a fraction of the pad size."
msgstr ""
"Proportional Diameter.\n"
"The hole diameter will be a fraction of the pad size."

#: appGUI/preferences/tools/Tools2FiducialsPrefGroupUI.py:27
msgid "Fiducials Tool Options"
msgstr "Fiducials Tool Options"

#: appGUI/preferences/tools/Tools2FiducialsPrefGroupUI.py:45
#: appTools/ToolFiducials.py:772
msgid ""
"This set the fiducial diameter if fiducial type is circular,\n"
"otherwise is the size of the fiducial.\n"
"The soldermask opening is double than that."
msgstr ""
"This set the fiducial diameter if fiducial type is circular,\n"
"otherwise is the size of the fiducial.\n"
"The soldermask opening is double than that."

#: appGUI/preferences/tools/Tools2FiducialsPrefGroupUI.py:73
#: appTools/ToolFiducials.py:800
msgid "Auto"
msgstr "Auto"

#: appGUI/preferences/tools/Tools2FiducialsPrefGroupUI.py:76
#: appTools/ToolFiducials.py:803
msgid "Mode:"
msgstr "Mode:"

#: appGUI/preferences/tools/Tools2FiducialsPrefGroupUI.py:78
msgid ""
"- 'Auto' - automatic placement of fiducials in the corners of the bounding "
"box.\n"
"- 'Manual' - manual placement of fiducials."
msgstr ""
"- 'Auto' - automatic placement of fiducials in the corners of the bounding "
"box.\n"
"- 'Manual' - manual placement of fiducials."

#: appGUI/preferences/tools/Tools2FiducialsPrefGroupUI.py:86
#: appTools/ToolFiducials.py:813
msgid "Up"
msgstr "Up"

#: appGUI/preferences/tools/Tools2FiducialsPrefGroupUI.py:87
#: appTools/ToolFiducials.py:814
msgid "Down"
msgstr "Down"

#: appGUI/preferences/tools/Tools2FiducialsPrefGroupUI.py:90
#: appTools/ToolFiducials.py:817
msgid "Second fiducial"
msgstr "Second fiducial"

#: appGUI/preferences/tools/Tools2FiducialsPrefGroupUI.py:92
#: appTools/ToolFiducials.py:819
msgid ""
"The position for the second fiducial.\n"
"- 'Up' - the order is: bottom-left, top-left, top-right.\n"
"- 'Down' - the order is: bottom-left, bottom-right, top-right.\n"
"- 'None' - there is no second fiducial. The order is: bottom-left, top-right."
msgstr ""
"The position for the second fiducial.\n"
"- 'Up' - the order is: bottom-left, top-left, top-right.\n"
"- 'Down' - the order is: bottom-left, bottom-right, top-right.\n"
"- 'None' - there is no second fiducial. The order is: bottom-left, top-right."

#: appGUI/preferences/tools/Tools2FiducialsPrefGroupUI.py:108
#: appTools/ToolFiducials.py:835
msgid "Cross"
msgstr "Cross"

#: appGUI/preferences/tools/Tools2FiducialsPrefGroupUI.py:109
#: appTools/ToolFiducials.py:836
msgid "Chess"
msgstr "Chess"

#: appGUI/preferences/tools/Tools2FiducialsPrefGroupUI.py:112
#: appTools/ToolFiducials.py:838
msgid "Fiducial Type"
msgstr "Fiducial Type"

#: appGUI/preferences/tools/Tools2FiducialsPrefGroupUI.py:114
#: appTools/ToolFiducials.py:840
msgid ""
"The type of fiducial.\n"
"- 'Circular' - this is the regular fiducial.\n"
"- 'Cross' - cross lines fiducial.\n"
"- 'Chess' - chess pattern fiducial."
msgstr ""
"The type of fiducial.\n"
"- 'Circular' - this is the regular fiducial.\n"
"- 'Cross' - cross lines fiducial.\n"
"- 'Chess' - chess pattern fiducial."

#: appGUI/preferences/tools/Tools2FiducialsPrefGroupUI.py:123
#: appTools/ToolFiducials.py:849
msgid "Line thickness"
msgstr "Line thickness"

#: appGUI/preferences/tools/Tools2InvertPrefGroupUI.py:27
msgid "Invert Gerber Tool Options"
msgstr "Invert Gerber Tool Options"

#: appGUI/preferences/tools/Tools2InvertPrefGroupUI.py:33
msgid ""
"A tool to invert Gerber geometry from positive to negative\n"
"and in revers."
msgstr ""
"A tool to invert Gerber geometry from positive to negative\n"
"and in revers."

#: appGUI/preferences/tools/Tools2InvertPrefGroupUI.py:47
#: appTools/ToolInvertGerber.py:236
msgid ""
"Distance by which to avoid\n"
"the edges of the Gerber object."
msgstr ""
"Distance by which to avoid\n"
"the edges of the Gerber object."

#: appGUI/preferences/tools/Tools2InvertPrefGroupUI.py:58
#: appTools/ToolInvertGerber.py:247
msgid "Lines Join Style"
msgstr "Lines Join Style"

#: appGUI/preferences/tools/Tools2InvertPrefGroupUI.py:60
#: appTools/ToolInvertGerber.py:249
msgid ""
"The way that the lines in the object outline will be joined.\n"
"Can be:\n"
"- rounded -> an arc is added between two joining lines\n"
"- square -> the lines meet in 90 degrees angle\n"
"- bevel -> the lines are joined by a third line"
msgstr ""
"The way that the lines in the object outline will be joined.\n"
"Can be:\n"
"- rounded -> an arc is added between two joining lines\n"
"- square -> the lines meet in 90 degrees angle\n"
"- bevel -> the lines are joined by a third line"

#: appGUI/preferences/tools/Tools2OptimalPrefGroupUI.py:27
msgid "Optimal Tool Options"
msgstr "Optimal Tool Options"

#: appGUI/preferences/tools/Tools2OptimalPrefGroupUI.py:33
msgid ""
"A tool to find the minimum distance between\n"
"every two Gerber geometric elements"
msgstr ""
"A tool to find the minimum distance between\n"
"every two Gerber geometric elements"

#: appGUI/preferences/tools/Tools2OptimalPrefGroupUI.py:48
#: appTools/ToolOptimal.py:434
msgid "Precision"
msgstr "Precision"

#: appGUI/preferences/tools/Tools2OptimalPrefGroupUI.py:50
msgid "Number of decimals for the distances and coordinates in this tool."
msgstr "Number of decimals for the distances and coordinates in this tool."

#: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:27
msgid "Punch Gerber Options"
msgstr "Punch Gerber Options"

#: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:108
#: appTools/ToolPunchGerber.py:795
msgid ""
"The punch hole source can be:\n"
"- Excellon Object-> the Excellon object drills center will serve as "
"reference.\n"
"- Fixed Diameter -> will try to use the pads center as reference adding "
"fixed diameter holes.\n"
"- Fixed Annular Ring -> will try to keep a set annular ring.\n"
"- Proportional -> will make a Gerber punch hole having the diameter a "
"percentage of the pad diameter."
msgstr ""
"The punch hole source can be:\n"
"- Excellon Object-> the Excellon object drills center will serve as "
"reference.\n"
"- Fixed Diameter -> will try to use the pads center as reference adding "
"fixed diameter holes.\n"
"- Fixed Annular Ring -> will try to keep a set annular ring.\n"
"- Proportional -> will make a Gerber punch hole having the diameter a "
"percentage of the pad diameter."

#: appGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:27
msgid "QRCode Tool Options"
msgstr "QRCode Tool Options"

#: appGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:33
msgid ""
"A tool to create a QRCode that can be inserted\n"
"into a selected Gerber file, or it can be exported as a file."
msgstr ""
"A tool to create a QRCode that can be inserted\n"
"into a selected Gerber file, or it can be exported as a file."

#: appGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:45
#: appTools/ToolQRCode.py:703
msgid "Version"
msgstr "Version"

#: appGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:47
#: appTools/ToolQRCode.py:705
msgid ""
"QRCode version can have values from 1 (21x21 boxes)\n"
"to 40 (177x177 boxes)."
msgstr ""
"QRCode version can have values from 1 (21x21 boxes)\n"
"to 40 (177x177 boxes)."

#: appGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:58
#: appTools/ToolQRCode.py:716
msgid "Error correction"
msgstr "Error correction"

#: appGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:60
#: appGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:71
#: appTools/ToolQRCode.py:718 appTools/ToolQRCode.py:729
#, python-format
msgid ""
"Parameter that controls the error correction used for the QR Code.\n"
"L = maximum 7%% errors can be corrected\n"
"M = maximum 15%% errors can be corrected\n"
"Q = maximum 25%% errors can be corrected\n"
"H = maximum 30%% errors can be corrected."
msgstr ""
"Parameter that controls the error correction used for the QR Code.\n"
"L = maximum 7%% errors can be corrected\n"
"M = maximum 15%% errors can be corrected\n"
"Q = maximum 25%% errors can be corrected\n"
"H = maximum 30%% errors can be corrected."

#: appGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:81
#: appTools/ToolQRCode.py:739
msgid "Box Size"
msgstr "Box Size"

#: appGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:83
#: appTools/ToolQRCode.py:741
msgid ""
"Box size control the overall size of the QRcode\n"
"by adjusting the size of each box in the code."
msgstr ""
"Box size control the overall size of the QRcode\n"
"by adjusting the size of each box in the code."

#: appGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:94
#: appTools/ToolQRCode.py:752
msgid "Border Size"
msgstr "Border Size"

#: appGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:96
#: appTools/ToolQRCode.py:754
msgid ""
"Size of the QRCode border. How many boxes thick is the border.\n"
"Default value is 4. The width of the clearance around the QRCode."
msgstr ""
"Size of the QRCode border. How many boxes thick is the border.\n"
"Default value is 4. The width of the clearance around the QRCode."

#: appGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:107
#: appTools/ToolQRCode.py:674
msgid "QRCode Data"
msgstr "QRCode Data"

#: appGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:109
#: appTools/ToolQRCode.py:676
msgid "QRCode Data. Alphanumeric text to be encoded in the QRCode."
msgstr "QRCode Data. Alphanumeric text to be encoded in the QRCode."

#: appGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:113
#: appTools/ToolQRCode.py:680
msgid "Add here the text to be included in the QRCode..."
msgstr "Add here the text to be included in the QRCode..."

#: appGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:119
#: appTools/ToolQRCode.py:765
msgid "Polarity"
msgstr "Polarity"

#: appGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:121
#: appTools/ToolQRCode.py:767
msgid ""
"Choose the polarity of the QRCode.\n"
"It can be drawn in a negative way (squares are clear)\n"
"or in a positive way (squares are opaque)."
msgstr ""
"Choose the polarity of the QRCode.\n"
"It can be drawn in a negative way (squares are clear)\n"
"or in a positive way (squares are opaque)."

#: appGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:125
#: appTools/ToolFilm.py:1144 appTools/ToolQRCode.py:771
msgid "Negative"
msgstr "Negative"

#: appGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:126
#: appTools/ToolFilm.py:1143 appTools/ToolQRCode.py:772
msgid "Positive"
msgstr "Positive"

#: appGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:128
#: appTools/ToolQRCode.py:774
msgid ""
"Choose the type of QRCode to be created.\n"
"If added on a Silkscreen Gerber file the QRCode may\n"
"be added as positive. If it is added to a Copper Gerber\n"
"file then perhaps the QRCode can be added as negative."
msgstr ""
"Choose the type of QRCode to be created.\n"
"If added on a Silkscreen Gerber file the QRCode may\n"
"be added as positive. If it is added to a Copper Gerber\n"
"file then perhaps the QRCode can be added as negative."

#: appGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:139
#: appGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:145
#: appTools/ToolQRCode.py:785 appTools/ToolQRCode.py:791
msgid ""
"The bounding box, meaning the empty space that surrounds\n"
"the QRCode geometry, can have a rounded or a square shape."
msgstr ""
"The bounding box, meaning the empty space that surrounds\n"
"the QRCode geometry, can have a rounded or a square shape."

#: appGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:152
#: appTools/ToolQRCode.py:819
msgid "Fill Color"
msgstr "Fill Color"

#: appGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:154
#: appTools/ToolQRCode.py:821
msgid "Set the QRCode fill color (squares color)."
msgstr "Set the QRCode fill color (squares color)."

#: appGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:162
#: appTools/ToolQRCode.py:843
msgid "Back Color"
msgstr "Back Color"

#: appGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:164
#: appTools/ToolQRCode.py:845
msgid "Set the QRCode background color."
msgstr "Set the QRCode background color."

#: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:27
msgid "Check Rules Tool Options"
msgstr "Check Rules Tool Options"

#: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:32
msgid ""
"A tool to check if Gerber files are within a set\n"
"of Manufacturing Rules."
msgstr ""
"A tool to check if Gerber files are within a set\n"
"of Manufacturing Rules."

#: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:42
#: appTools/ToolRulesCheck.py:428 appTools/ToolRulesCheck.py:1367
msgid "Trace Size"
msgstr "Trace Size"

#: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:44
#: appTools/ToolRulesCheck.py:1369
msgid "This checks if the minimum size for traces is met."
msgstr "This checks if the minimum size for traces is met."

#: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:54
#: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:74
#: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:94
#: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:114
#: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:134
#: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:154
#: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:174
#: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:194
#: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:216
#: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:236
#: appTools/ToolRulesCheck.py:1379 appTools/ToolRulesCheck.py:1401
#: appTools/ToolRulesCheck.py:1424 appTools/ToolRulesCheck.py:1447
#: appTools/ToolRulesCheck.py:1470 appTools/ToolRulesCheck.py:1493
#: appTools/ToolRulesCheck.py:1516 appTools/ToolRulesCheck.py:1539
#: appTools/ToolRulesCheck.py:1564 appTools/ToolRulesCheck.py:1587
msgid "Min value"
msgstr "Min value"

#: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:56
#: appTools/ToolRulesCheck.py:1381
msgid "Minimum acceptable trace size."
msgstr "Minimum acceptable trace size."

#: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:61
#: appTools/ToolRulesCheck.py:656 appTools/ToolRulesCheck.py:686
#: appTools/ToolRulesCheck.py:1388
msgid "Copper to Copper clearance"
msgstr "Copper to Copper clearance"

#: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:63
#: appTools/ToolRulesCheck.py:1390
msgid ""
"This checks if the minimum clearance between copper\n"
"features is met."
msgstr ""
"This checks if the minimum clearance between copper\n"
"features is met."

#: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:76
#: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:96
#: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:116
#: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:136
#: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:156
#: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:176
#: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:238
#: appTools/ToolRulesCheck.py:1403 appTools/ToolRulesCheck.py:1426
#: appTools/ToolRulesCheck.py:1449 appTools/ToolRulesCheck.py:1472
#: appTools/ToolRulesCheck.py:1495 appTools/ToolRulesCheck.py:1518
#: appTools/ToolRulesCheck.py:1566
msgid "Minimum acceptable clearance value."
msgstr "Minimum acceptable clearance value."

#: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:81
#: appTools/ToolRulesCheck.py:716 appTools/ToolRulesCheck.py:722
#: appTools/ToolRulesCheck.py:735 appTools/ToolRulesCheck.py:742
#: appTools/ToolRulesCheck.py:1411
msgid "Copper to Outline clearance"
msgstr "Copper to Outline clearance"

#: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:83
#: appTools/ToolRulesCheck.py:1413
msgid ""
"This checks if the minimum clearance between copper\n"
"features and the outline is met."
msgstr ""
"This checks if the minimum clearance between copper\n"
"features and the outline is met."

#: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:101
#: appTools/ToolRulesCheck.py:1434
msgid "Silk to Silk Clearance"
msgstr "Silk to Silk Clearance"

#: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:103
#: appTools/ToolRulesCheck.py:1436
msgid ""
"This checks if the minimum clearance between silkscreen\n"
"features and silkscreen features is met."
msgstr ""
"This checks if the minimum clearance between silkscreen\n"
"features and silkscreen features is met."

#: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:121
#: appTools/ToolRulesCheck.py:825 appTools/ToolRulesCheck.py:831
#: appTools/ToolRulesCheck.py:849 appTools/ToolRulesCheck.py:1457
msgid "Silk to Solder Mask Clearance"
msgstr "Silk to Solder Mask Clearance"

#: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:123
#: appTools/ToolRulesCheck.py:1459
msgid ""
"This checks if the minimum clearance between silkscreen\n"
"features and soldermask features is met."
msgstr ""
"This checks if the minimum clearance between silkscreen\n"
"features and soldermask features is met."

#: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:141
#: appTools/ToolRulesCheck.py:879 appTools/ToolRulesCheck.py:885
#: appTools/ToolRulesCheck.py:899 appTools/ToolRulesCheck.py:906
#: appTools/ToolRulesCheck.py:1480
msgid "Silk to Outline Clearance"
msgstr "Silk to Outline Clearance"

#: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:143
#: appTools/ToolRulesCheck.py:1482
msgid ""
"This checks if the minimum clearance between silk\n"
"features and the outline is met."
msgstr ""
"This checks if the minimum clearance between silk\n"
"features and the outline is met."

#: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:161
#: appTools/ToolRulesCheck.py:917 appTools/ToolRulesCheck.py:944
#: appTools/ToolRulesCheck.py:1503
msgid "Minimum Solder Mask Sliver"
msgstr "Minimum Solder Mask Sliver"

#: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:163
#: appTools/ToolRulesCheck.py:1505
msgid ""
"This checks if the minimum clearance between soldermask\n"
"features and soldermask features is met."
msgstr ""
"This checks if the minimum clearance between soldermask\n"
"features and soldermask features is met."

#: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:181
#: appTools/ToolRulesCheck.py:982 appTools/ToolRulesCheck.py:988
#: appTools/ToolRulesCheck.py:1004 appTools/ToolRulesCheck.py:1011
#: appTools/ToolRulesCheck.py:1526
msgid "Minimum Annular Ring"
msgstr "Minimum Annular Ring"

#: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:183
#: appTools/ToolRulesCheck.py:1528
msgid ""
"This checks if the minimum copper ring left by drilling\n"
"a hole into a pad is met."
msgstr ""
"This checks if the minimum copper ring left by drilling\n"
"a hole into a pad is met."

#: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:196
#: appTools/ToolRulesCheck.py:1541
msgid "Minimum acceptable ring value."
msgstr "Minimum acceptable ring value."

#: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:203
#: appTools/ToolRulesCheck.py:372 appTools/ToolRulesCheck.py:1551
msgid "Hole to Hole Clearance"
msgstr "Hole to Hole Clearance"

#: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:205
#: appTools/ToolRulesCheck.py:1553
msgid ""
"This checks if the minimum clearance between a drill hole\n"
"and another drill hole is met."
msgstr ""
"This checks if the minimum clearance between a drill hole\n"
"and another drill hole is met."

#: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:218
#: appTools/ToolRulesCheck.py:1589
msgid "Minimum acceptable drill size."
msgstr "Minimum acceptable drill size."

#: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:223
#: appTools/ToolRulesCheck.py:346 appTools/ToolRulesCheck.py:1574
msgid "Hole Size"
msgstr "Hole Size"

#: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:225
#: appTools/ToolRulesCheck.py:1576
msgid ""
"This checks if the drill holes\n"
"sizes are above the threshold."
msgstr ""
"This checks if the drill holes\n"
"sizes are above the threshold."

#: appGUI/preferences/tools/Tools2sidedPrefGroupUI.py:27
msgid "2Sided Tool Options"
msgstr "2Sided Tool Options"

#: appGUI/preferences/tools/Tools2sidedPrefGroupUI.py:33
msgid ""
"A tool to help in creating a double sided\n"
"PCB using alignment holes."
msgstr ""
"A tool to help in creating a double sided\n"
"PCB using alignment holes."

#: appGUI/preferences/tools/Tools2sidedPrefGroupUI.py:47
msgid "Drill dia"
msgstr "Drill dia"

#: appGUI/preferences/tools/Tools2sidedPrefGroupUI.py:49
#: appTools/ToolDblSided.py:833 appTools/ToolDblSided.py:838
msgid "Diameter of the drill for the alignment holes."
msgstr "Diameter of the drill for the alignment holes."

#: appGUI/preferences/tools/Tools2sidedPrefGroupUI.py:56
msgid "Align Axis"
msgstr "Align Axis"

#: appGUI/preferences/tools/Tools2sidedPrefGroupUI.py:58
#: appGUI/preferences/tools/Tools2sidedPrefGroupUI.py:71
#: appTools/ToolDblSided.py:674 appTools/ToolDblSided.py:849
msgid "Mirror vertically (X) or horizontally (Y)."
msgstr "Mirror vertically (X) or horizontally (Y)."

#: appGUI/preferences/tools/Tools2sidedPrefGroupUI.py:69
msgid "Mirror Axis:"
msgstr "Mirror Axis:"

#: appGUI/preferences/tools/Tools2sidedPrefGroupUI.py:86
#: appTools/ToolDblSided.py:700
msgid "Box"
msgstr "Box"

#: appGUI/preferences/tools/Tools2sidedPrefGroupUI.py:87
#: appTools/ToolDblSided.py:701
#, fuzzy
#| msgid "Hole Size"
msgid "Hole Snap"
msgstr "Hole Size"

#: appGUI/preferences/tools/Tools2sidedPrefGroupUI.py:90
msgid "Axis Ref"
msgstr "Axis Ref"

#: appGUI/preferences/tools/Tools2sidedPrefGroupUI.py:92
#, fuzzy
#| msgid ""
#| "The coordinates used as reference for the mirror operation.\n"
#| "Can be:\n"
#| "- Point -> a set of coordinates (x,y) around which the object is "
#| "mirrored\n"
#| "- Box -> a set of coordinates (x, y) obtained from the center of the\n"
#| "bounding box of another object selected below"
msgid ""
"The coordinates used as reference for the mirror operation.\n"
"Can be:\n"
"- Point -> a set of coordinates (x,y) around which the object is mirrored\n"
"- Box -> a set of coordinates (x, y) obtained from the center of the\n"
"bounding box of another object selected below\n"
"- Hole Snap-> a point defined by the center of a drill hone in a Excellon "
"object"
msgstr ""
"The coordinates used as reference for the mirror operation.\n"
"Can be:\n"
"- Point -> a set of coordinates (x,y) around which the object is mirrored\n"
"- Box -> a set of coordinates (x, y) obtained from the center of the\n"
"bounding box of another object selected below"

#: appGUI/preferences/tools/ToolsCalculatorsPrefGroupUI.py:27
msgid "Calculators Tool Options"
msgstr "Calculators Tool Options"

#: appGUI/preferences/tools/ToolsCalculatorsPrefGroupUI.py:31
#: appTools/ToolCalculators.py:152
msgid "V-Shape Tool Calculator"
msgstr "V-Shape Tool Calculator"

#: appGUI/preferences/tools/ToolsCalculatorsPrefGroupUI.py:33
msgid ""
"Calculate the tool diameter for a given V-shape tool,\n"
"having the tip diameter, tip angle and\n"
"depth-of-cut as parameters."
msgstr ""
"Calculate the tool diameter for a given V-shape tool,\n"
"having the tip diameter, tip angle and\n"
"depth-of-cut as parameters."

#: appGUI/preferences/tools/ToolsCalculatorsPrefGroupUI.py:50
#: appTools/ToolCalculators.py:220
msgid "Tip Diameter"
msgstr "Tip Diameter"

#: appGUI/preferences/tools/ToolsCalculatorsPrefGroupUI.py:52
#: appTools/ToolCalculators.py:228
msgid ""
"This is the tool tip diameter.\n"
"It is specified by manufacturer."
msgstr ""
"This is the tool tip diameter.\n"
"It is specified by manufacturer."

#: appGUI/preferences/tools/ToolsCalculatorsPrefGroupUI.py:64
#: appTools/ToolCalculators.py:231
msgid "Tip Angle"
msgstr "Tip Angle"

#: appGUI/preferences/tools/ToolsCalculatorsPrefGroupUI.py:66
msgid ""
"This is the angle on the tip of the tool.\n"
"It is specified by manufacturer."
msgstr ""
"This is the angle on the tip of the tool.\n"
"It is specified by manufacturer."

#: appGUI/preferences/tools/ToolsCalculatorsPrefGroupUI.py:80
msgid ""
"This is depth to cut into material.\n"
"In the CNCJob object it is the CutZ parameter."
msgstr ""
"This is depth to cut into material.\n"
"In the CNCJob object it is the CutZ parameter."

#: appGUI/preferences/tools/ToolsCalculatorsPrefGroupUI.py:87
#: appTools/ToolCalculators.py:154
msgid "ElectroPlating Calculator"
msgstr "ElectroPlating Calculator"

#: appGUI/preferences/tools/ToolsCalculatorsPrefGroupUI.py:89
#: appTools/ToolCalculators.py:284
msgid ""
"This calculator is useful for those who plate the via/pad/drill holes,\n"
"using a method like graphite ink or calcium hypophosphite ink or palladium "
"chloride."
msgstr ""
"This calculator is useful for those who plate the via/pad/drill holes,\n"
"using a method like graphite ink or calcium hypophosphite ink or palladium "
"chloride."

#: appGUI/preferences/tools/ToolsCalculatorsPrefGroupUI.py:100
#: appTools/ToolCalculators.py:293
msgid "Board Length"
msgstr "Board Length"

#: appGUI/preferences/tools/ToolsCalculatorsPrefGroupUI.py:102
#: appTools/ToolCalculators.py:299
msgid "This is the board length. In centimeters."
msgstr "This is the board length. In centimeters."

#: appGUI/preferences/tools/ToolsCalculatorsPrefGroupUI.py:112
#: appTools/ToolCalculators.py:301
msgid "Board Width"
msgstr "Board Width"

#: appGUI/preferences/tools/ToolsCalculatorsPrefGroupUI.py:114
#: appTools/ToolCalculators.py:307
msgid "This is the board width.In centimeters."
msgstr "This is the board width.In centimeters."

#: appGUI/preferences/tools/ToolsCalculatorsPrefGroupUI.py:119
#: appTools/ToolCalculators.py:309
msgid "Current Density"
msgstr "Current Density"

#: appGUI/preferences/tools/ToolsCalculatorsPrefGroupUI.py:125
#: appTools/ToolCalculators.py:316
msgid ""
"Current density to pass through the board. \n"
"In Amps per Square Feet ASF."
msgstr ""
"Current density to pass through the board. \n"
"In Amps per Square Feet ASF."

#: appGUI/preferences/tools/ToolsCalculatorsPrefGroupUI.py:131
#: appTools/ToolCalculators.py:319
msgid "Copper Growth"
msgstr "Copper Growth"

#: appGUI/preferences/tools/ToolsCalculatorsPrefGroupUI.py:137
#: appTools/ToolCalculators.py:326
msgid ""
"How thick the copper growth is intended to be.\n"
"In microns."
msgstr ""
"How thick the copper growth is intended to be.\n"
"In microns."

#: appGUI/preferences/tools/ToolsCornersPrefGroupUI.py:27
msgid "Corner Markers Options"
msgstr "Corner Markers Options"

#: appGUI/preferences/tools/ToolsCornersPrefGroupUI.py:44
#: appTools/ToolCorners.py:386
msgid "The thickness of the line that makes the corner marker."
msgstr "The thickness of the line that makes the corner marker."

#: appGUI/preferences/tools/ToolsCornersPrefGroupUI.py:58
#: appTools/ToolCorners.py:400
msgid "The length of the line that makes the corner marker."
msgstr "The length of the line that makes the corner marker."

#: appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:28
msgid "Cutout Tool Options"
msgstr "Cutout Tool Options"

#: appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:34
msgid ""
"Create toolpaths to cut around\n"
"the PCB and separate it from\n"
"the original board."
msgstr ""
"Create toolpaths to cut around\n"
"the PCB and separate it from\n"
"the original board."

#: appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:45
#: appTools/ToolCutOut.py:2060
msgid ""
"Diameter of the tool used to cutout\n"
"the PCB shape out of the surrounding material."
msgstr ""
"Diameter of the tool used to cutout\n"
"the PCB shape out of the surrounding material."

#: appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:100
msgid "Object kind"
msgstr "Object kind"

#: appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:102
#: appTools/ToolCutOut.py:1993
msgid ""
"Choice of what kind the object we want to cutout is.<BR>- <B>Single</B>: "
"contain a single PCB Gerber outline object.<BR>- <B>Panel</B>: a panel PCB "
"Gerber object, which is made\n"
"out of many individual PCB outlines."
msgstr ""
"Choice of what kind the object we want to cutout is.<BR>- <B>Single</B>: "
"contain a single PCB Gerber outline object.<BR>- <B>Panel</B>: a panel PCB "
"Gerber object, which is made\n"
"out of many individual PCB outlines."

#: appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:109
#: appTools/ToolCutOut.py:1999
msgid "Single"
msgstr "Single"

#: appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:110
#: appTools/ToolCutOut.py:2000
msgid "Panel"
msgstr "Panel"

#: appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:211
msgid ""
"Number of gaps used for the cutout.\n"
"There can be maximum 8 bridges/gaps.\n"
"The choices are:\n"
"- None  - no gaps\n"
"- lr    - left + right\n"
"- tb    - top + bottom\n"
"- 4     - left + right +top + bottom\n"
"- 2lr   - 2*left + 2*right\n"
"- 2tb  - 2*top + 2*bottom\n"
"- 8     - 2*left + 2*right +2*top + 2*bottom"
msgstr ""
"Number of gaps used for the cutout.\n"
"There can be maximum 8 bridges/gaps.\n"
"The choices are:\n"
"- None  - no gaps\n"
"- lr    - left + right\n"
"- tb    - top + bottom\n"
"- 4     - left + right +top + bottom\n"
"- 2lr   - 2*left + 2*right\n"
"- 2tb  - 2*top + 2*bottom\n"
"- 8     - 2*left + 2*right +2*top + 2*bottom"

#: appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:240
#: appTools/ToolCutOut.py:2331
msgid "Big cursor"
msgstr ""

#: appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:242
#: appTools/ToolCutOut.py:2333
msgid "Use a big cursor when adding manual gaps."
msgstr ""

#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:27
#, fuzzy
#| msgid "Film Tool Options"
msgid "Drilling Tool Options"
msgstr "Film Tool Options"

#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:33
#: appTools/ToolDrilling.py:2006 appTools/ToolMilling.py:1611
#, fuzzy
#| msgid "Create Geometry for milling holes."
msgid "Create CNCJob with toolpaths for drilling or milling holes."
msgstr "Create Geometry for milling holes."

#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:41
#: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:54
#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:156
#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:142
#: appTools/ToolDrilling.py:2082 appTools/ToolIsolation.py:3020
#: appTools/ToolMilling.py:1687 appTools/ToolNCC.py:3819
#: appTools/ToolPaint.py:2842
msgid "Tool order"
msgstr "Tool order"

#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:42
#: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:55
#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:157
#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:167
#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:143
#: appTools/ToolDrilling.py:2083 appTools/ToolIsolation.py:3021
#: appTools/ToolMilling.py:1688 appTools/ToolNCC.py:3820
#: appTools/ToolNCC.py:3830 appTools/ToolPaint.py:2843
#: appTools/ToolPaint.py:2853
msgid ""
"This set the way that the tools in the tools table are used.\n"
"'No' --> means that the used order is the one in the tool table\n"
"'Forward' --> means that the tools will be ordered from small to big\n"
"'Reverse' --> means that the tools will ordered from big to small\n"
"\n"
"WARNING: using rest machining will automatically set the order\n"
"in reverse and disable this control."
msgstr ""
"This set the way that the tools in the tools table are used.\n"
"'No' --> means that the used order is the one in the tool table\n"
"'Forward' --> means that the tools will be ordered from small to big\n"
"'Reverse' --> means that the tools will ordered from big to small\n"
"\n"
"WARNING: using rest machining will automatically set the order\n"
"in reverse and disable this control."

#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:50
#: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:63
#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:165
#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:151
#: appTools/ToolDrilling.py:2091 appTools/ToolIsolation.py:3029
#: appTools/ToolMilling.py:1696 appTools/ToolNCC.py:3828
#: appTools/ToolPaint.py:2851
msgid "Forward"
msgstr "Forward"

#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:51
#: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:64
#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:166
#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:152
#: appTools/ToolDrilling.py:2092 appTools/ToolIsolation.py:3030
#: appTools/ToolMilling.py:1697 appTools/ToolNCC.py:3829
#: appTools/ToolPaint.py:2852
msgid "Reverse"
msgstr "Reverse"

#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:118
#: appTools/ToolDrilling.py:2387 appTools/ToolMilling.py:2065
msgid ""
"Include tool-change sequence\n"
"in G-Code (Pause for tool change)."
msgstr ""
"Include tool-change sequence\n"
"in G-Code (Pause for tool change)."

#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:223
msgid ""
"The preprocessor JSON file that dictates\n"
"Gcode output."
msgstr ""
"The preprocessor JSON file that dictates\n"
"Gcode output."

#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:239
#, fuzzy
#| msgid "Mill Slots"
msgid "Drilling Slots"
msgstr "Mill Slots"

#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:278
#, fuzzy
#| msgid "A list of Excellon Editor parameters."
msgid "A list of advanced parameters."
msgstr "A list of Excellon Editor parameters."

#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:296
msgid "Toolchange X,Y"
msgstr "Toolchange X,Y"

#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:308
#: appTools/ToolDrilling.py:2417 appTools/ToolMilling.py:2089
msgid ""
"Height of the tool just after start.\n"
"Delete the value if you don't need this feature."
msgstr ""
"Height of the tool just after start.\n"
"Delete the value if you don't need this feature."

#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:380
msgid "Fast Retract"
msgstr "Fast Retract"

#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:382
msgid ""
"Exit hole strategy.\n"
" - When uncheked, while exiting the drilled hole the drill bit\n"
"will travel slow, with set feedrate (G1), up to zero depth and then\n"
"travel as fast as possible (G0) to the Z Move (travel height).\n"
" - When checked the travel from Z cut (cut depth) to Z_move\n"
"(travel height) is done as fast as possible (G0) in one move."
msgstr ""
"Exit hole strategy.\n"
" - When uncheked, while exiting the drilled hole the drill bit\n"
"will travel slow, with set feedrate (G1), up to zero depth and then\n"
"travel as fast as possible (G0) to the Z Move (travel height).\n"
" - When checked the travel from Z cut (cut depth) to Z_move\n"
"(travel height) is done as fast as possible (G0) in one move."

#: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:27
msgid "Film Tool Options"
msgstr "Film Tool Options"

#: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:33
msgid ""
"Create a PCB film from a Gerber or Geometry object.\n"
"The file is saved in SVG format."
msgstr ""
"Create a PCB film from a Gerber or Geometry object.\n"
"The file is saved in SVG format."

#: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:43
msgid "Film Type"
msgstr "Film Type"

#: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:45
#: appTools/ToolFilm.py:1148
msgid ""
"Generate a Positive black film or a Negative film.\n"
"Positive means that it will print the features\n"
"with black on a white canvas.\n"
"Negative means that it will print the features\n"
"with white on a black canvas.\n"
"The Film format is SVG."
msgstr ""
"Generate a Positive black film or a Negative film.\n"
"Positive means that it will print the features\n"
"with black on a white canvas.\n"
"Negative means that it will print the features\n"
"with white on a black canvas.\n"
"The Film format is SVG."

#: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:56
msgid "Film Color"
msgstr "Film Color"

#: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:58
msgid "Set the film color when positive film is selected."
msgstr "Set the film color when positive film is selected."

#: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:71
#: appTools/ToolFilm.py:1164
msgid "Border"
msgstr "Border"

#: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:73
#: appTools/ToolFilm.py:1166
msgid ""
"Specify a border around the object.\n"
"Only for negative film.\n"
"It helps if we use as a Box Object the same \n"
"object as in Film Object. It will create a thick\n"
"black bar around the actual print allowing for a\n"
"better delimitation of the outline features which are of\n"
"white color like the rest and which may confound with the\n"
"surroundings if not for this border."
msgstr ""
"Specify a border around the object.\n"
"Only for negative film.\n"
"It helps if we use as a Box Object the same \n"
"object as in Film Object. It will create a thick\n"
"black bar around the actual print allowing for a\n"
"better delimitation of the outline features which are of\n"
"white color like the rest and which may confound with the\n"
"surroundings if not for this border."

#: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:90
#: appTools/ToolFilm.py:1133
msgid "Scale Stroke"
msgstr "Scale Stroke"

#: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:92
#: appTools/ToolFilm.py:1135
msgid ""
"Scale the line stroke thickness of each feature in the SVG file.\n"
"It means that the line that envelope each SVG feature will be thicker or "
"thinner,\n"
"therefore the fine features may be more affected by this parameter."
msgstr ""
"Scale the line stroke thickness of each feature in the SVG file.\n"
"It means that the line that envelope each SVG feature will be thicker or "
"thinner,\n"
"therefore the fine features may be more affected by this parameter."

#: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:99 appTools/ToolFilm.py:977
msgid "Film Adjustments"
msgstr "Film Adjustments"

#: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:101
#: appTools/ToolFilm.py:979
msgid ""
"Sometime the printers will distort the print shape, especially the Laser "
"types.\n"
"This section provide the tools to compensate for the print distortions."
msgstr ""
"Sometime the printers will distort the print shape, especially the Laser "
"types.\n"
"This section provide the tools to compensate for the print distortions."

#: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:108
#: appTools/ToolFilm.py:986
msgid "Scale Film geometry"
msgstr "Scale Film geometry"

#: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:110
#: appTools/ToolFilm.py:988
msgid ""
"A value greater than 1 will stretch the film\n"
"while a value less than 1 will jolt it."
msgstr ""
"A value greater than 1 will stretch the film\n"
"while a value less than 1 will jolt it."

#: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:139
#: appTools/ToolFilm.py:1030
msgid "Skew Film geometry"
msgstr "Skew Film geometry"

#: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:141
#: appTools/ToolFilm.py:1032
msgid ""
"Positive values will skew to the right\n"
"while negative values will skew to the left."
msgstr ""
"Positive values will skew to the right\n"
"while negative values will skew to the left."

#: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:171
#: appTools/ToolFilm.py:1062
msgid ""
"The reference point to be used as origin for the skew.\n"
"It can be one of the four points of the geometry bounding box."
msgstr ""
"The reference point to be used as origin for the skew.\n"
"It can be one of the four points of the geometry bounding box."

#: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:174
#: appTools/ToolCorners.py:342 appTools/ToolFiducials.py:694
#: appTools/ToolFilm.py:1065
msgid "Bottom Left"
msgstr "Bottom Left"

#: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:175
#: appTools/ToolCorners.py:350 appTools/ToolFilm.py:1066
msgid "Top Left"
msgstr "Top Left"

#: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:176
#: appTools/ToolCorners.py:346 appTools/ToolFilm.py:1067
msgid "Bottom Right"
msgstr "Bottom Right"

#: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:177
#: appTools/ToolFilm.py:1068
msgid "Top right"
msgstr "Top right"

#: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:185
#: appTools/ToolFilm.py:1091
msgid "Mirror Film geometry"
msgstr "Mirror Film geometry"

#: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:187
#: appTools/ToolFilm.py:1093
msgid "Mirror the film geometry on the selected axis or on both."
msgstr "Mirror the film geometry on the selected axis or on both."

#: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:201
#: appTools/ToolFilm.py:1107
msgid "Mirror axis"
msgstr "Mirror axis"

#: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:211
#: appTools/ToolFilm.py:1253
msgid "SVG"
msgstr "SVG"

#: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:212
#: appTools/ToolFilm.py:1254
msgid "PNG"
msgstr "PNG"

#: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:213
#: appTools/ToolFilm.py:1255
msgid "PDF"
msgstr "PDF"

#: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:216
#: appTools/ToolFilm.py:1146 appTools/ToolFilm.py:1258
msgid "Film Type:"
msgstr "Film Type:"

#: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:218
#: appTools/ToolFilm.py:1260
msgid ""
"The file type of the saved film. Can be:\n"
"- 'SVG' -> open-source vectorial format\n"
"- 'PNG' -> raster image\n"
"- 'PDF' -> portable document format"
msgstr ""
"The file type of the saved film. Can be:\n"
"- 'SVG' -> open-source vectorial format\n"
"- 'PNG' -> raster image\n"
"- 'PDF' -> portable document format"

#: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:227
#: appTools/ToolFilm.py:1269
msgid "Page Orientation"
msgstr "Page Orientation"

#: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:240
#: appTools/ToolFilm.py:1282
msgid "Page Size"
msgstr "Page Size"

#: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:241
#: appTools/ToolFilm.py:1283
msgid "A selection of standard ISO 216 page sizes."
msgstr "A selection of standard ISO 216 page sizes."

#: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:308
#: appTools/ToolFilm.py:1352
msgid "Default value is 96 DPI. Change this value to scale the PNG file."
msgstr ""

#: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:26
msgid "Isolation Tool Options"
msgstr "Isolation Tool Options"

#: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:48
#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:49
#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:57
msgid "Comma separated values"
msgstr "Comma separated values"

#: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:72
#: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:80
#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:55
#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:63
#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:64
msgid ""
"Default tool type:\n"
"- 'V-shape'\n"
"- Circular"
msgstr ""
"Default tool type:\n"
"- 'V-shape'\n"
"- Circular"

#: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:77
#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:60
#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:69
msgid "V-shape"
msgstr "V-shape"

#: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:103
msgid ""
"The tip angle for V-Shape Tool.\n"
"In degrees."
msgstr ""
"The tip angle for V-Shape Tool.\n"
"In degrees."

#: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:117
#: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:126
#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:100
#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:109
msgid ""
"Depth of cut into material. Negative value.\n"
"In FlatCAM units."
msgstr ""
"Depth of cut into material. Negative value.\n"
"In FlatCAM units."

#: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:136
#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:119
#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:125
#: appTools/ToolPaint.py:2883
msgid ""
"Diameter for the new tool to add in the Tool Table.\n"
"If the tool is V-shape type then this value is automatically\n"
"calculated from the other parameters."
msgstr ""
"Diameter for the new tool to add in the Tool Table.\n"
"If the tool is V-shape type then this value is automatically\n"
"calculated from the other parameters."

#: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:243
#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:288
#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:244
#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:245
#: appTools/ToolIsolation.py:3248 appTools/ToolNCC.py:4114
#: appTools/ToolPaint.py:3068
msgid "Rest"
msgstr "Rest"

#: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:246
#: appTools/ToolIsolation.py:3251
msgid ""
"If checked, use 'rest machining'.\n"
"Basically it will isolate outside PCB features,\n"
"using the biggest tool and continue with the next tools,\n"
"from bigger to smaller, to isolate the copper features that\n"
"could not be cleared by previous tool, until there is\n"
"no more copper features to isolate or there are no more tools.\n"
"If not checked, use the standard algorithm."
msgstr ""
"If checked, use 'rest machining'.\n"
"Basically it will isolate outside PCB features,\n"
"using the biggest tool and continue with the next tools,\n"
"from bigger to smaller, to isolate the copper features that\n"
"could not be cleared by previous tool, until there is\n"
"no more copper features to isolate or there are no more tools.\n"
"If not checked, use the standard algorithm."

#: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:258
#: appTools/ToolIsolation.py:3273
msgid "Combine"
msgstr "Combine"

#: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:260
#: appTools/ToolIsolation.py:3275
msgid "Combine all passes into one object"
msgstr "Combine all passes into one object"

#: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:267
#: appTools/ToolIsolation.py:3282
msgid "Except"
msgstr "Except"

#: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:268
#: appTools/ToolIsolation.py:3283
msgid ""
"When the isolation geometry is generated,\n"
"by checking this, the area of the object below\n"
"will be subtracted from the isolation geometry."
msgstr ""
"When the isolation geometry is generated,\n"
"by checking this, the area of the object below\n"
"will be subtracted from the isolation geometry."

#: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:277
#: appTools/ToolIsolation.py:3322
msgid ""
"Isolation scope. Choose what to isolate:\n"
"- 'All' -> Isolate all the polygons in the object\n"
"- 'Area Selection' -> Isolate polygons within a selection area.\n"
"- 'Polygon Selection' -> Isolate a selection of polygons.\n"
"- 'Reference Object' - will process the area specified by another object."
msgstr ""
"Isolation scope. Choose what to isolate:\n"
"- 'All' -> Isolate all the polygons in the object\n"
"- 'Area Selection' -> Isolate polygons within a selection area.\n"
"- 'Polygon Selection' -> Isolate a selection of polygons.\n"
"- 'Reference Object' - will process the area specified by another object."

#: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:285
#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:280
#: appTools/ToolIsolation.py:825 appTools/ToolIsolation.py:1416
#: appTools/ToolIsolation.py:3330 appTools/ToolPaint.py:1037
#: appTools/ToolPaint.py:3126 appTools/ToolPaint.py:3242
#: tclCommands/TclCommandPaint.py:164
msgid "Polygon Selection"
msgstr "Polygon Selection"

#: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:305
#: appTools/ToolIsolation.py:3366
msgid "Interiors"
msgstr "Interiors"

#: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:307
#: appTools/ToolIsolation.py:3368
msgid ""
"When checked the user can select interiors of a polygon.\n"
"(holes in the polygon)."
msgstr ""
"When checked the user can select interiors of a polygon.\n"
"(holes in the polygon)."

#: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:312
#: appTools/ToolIsolation.py:3263
msgid "Forced Rest"
msgstr "Forced Rest"

#: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:314
#: appTools/ToolIsolation.py:3265
msgid ""
"When checked the isolation will be done with the current tool even if\n"
"interiors of a polygon (holes in the polygon) could not be isolated.\n"
"Works when 'rest machining' is used."
msgstr ""
"When checked the isolation will be done with the current tool even if\n"
"interiors of a polygon (holes in the polygon) could not be isolated.\n"
"Works when 'rest machining' is used."

#: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:327
#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:339
#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:303
msgid "Normal"
msgstr "Normal"

#: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:328
#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:340
#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:304
msgid "Progressive"
msgstr "Progressive"

#: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:329
#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:341
#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:305
#: appObjects/AppObject.py:439 appObjects/FlatCAMObj.py:255
#: appObjects/FlatCAMObj.py:286 appObjects/FlatCAMObj.py:302
#: appObjects/FlatCAMObj.py:382 appTools/ToolCopperThieving.py:1038
#: appTools/ToolCorners.py:263 appTools/ToolFiducials.py:530
#: appTools/ToolMove.py:229 appTools/ToolQRCode.py:464 app_Main.py:4676
msgid "Plotting"
msgstr "Plotting"

#: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:331
#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:343
#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:307
msgid ""
"- 'Normal' -  normal plotting, done at the end of the job\n"
"- 'Progressive' - each shape is plotted after it is generated"
msgstr ""
"- 'Normal' -  normal plotting, done at the end of the job\n"
"- 'Progressive' - each shape is plotted after it is generated"

#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:27
msgid "NCC Tool Options"
msgstr "NCC Tool Options"

#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:33
msgid ""
"Create a Geometry object with\n"
"toolpaths to cut all non-copper regions."
msgstr ""
"Create a Geometry object with\n"
"toolpaths to cut all non-copper regions."

#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:266
msgid "Offset value"
msgstr "Offset value"

#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:268
msgid ""
"If used, it will add an offset to the copper features.\n"
"The copper clearing will finish to a distance\n"
"from the copper features.\n"
"The value can be between 0.0 and 9999.9 FlatCAM units."
msgstr ""
"If used, it will add an offset to the copper features.\n"
"The copper clearing will finish to a distance\n"
"from the copper features.\n"
"The value can be between 0.0 and 9999.9 FlatCAM units."

#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:290 appTools/ToolNCC.py:4118
msgid ""
"If checked, use 'rest machining'.\n"
"Basically it will clear copper outside PCB features,\n"
"using the biggest tool and continue with the next tools,\n"
"from bigger to smaller, to clear areas of copper that\n"
"could not be cleared by previous tool, until there is\n"
"no more copper to clear or there are no more tools.\n"
"If not checked, use the standard algorithm."
msgstr ""
"If checked, use 'rest machining'.\n"
"Basically it will clear copper outside PCB features,\n"
"using the biggest tool and continue with the next tools,\n"
"from bigger to smaller, to clear areas of copper that\n"
"could not be cleared by previous tool, until there is\n"
"no more copper to clear or there are no more tools.\n"
"If not checked, use the standard algorithm."

#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:313 appTools/ToolNCC.py:4198
msgid ""
"Selection of area to be processed.\n"
"- 'Itself' - the processing extent is based on the object that is "
"processed.\n"
" - 'Area Selection' - left mouse click to start selection of the area to be "
"processed.\n"
"- 'Reference Object' - will process the area specified by another object."
msgstr ""
"Selection of area to be processed.\n"
"- 'Itself' - the processing extent is based on the object that is "
"processed.\n"
" - 'Area Selection' - left mouse click to start selection of the area to be "
"processed.\n"
"- 'Reference Object' - will process the area specified by another object."

#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:27
msgid "Paint Tool Options"
msgstr "Paint Tool Options"

#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:33
msgid "<b>Parameters:</b>"
msgstr "<b>Parameters:</b>"

#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:107
#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:116
msgid ""
"Depth of cut into material. Negative value.\n"
"In application units."
msgstr ""
"Depth of cut into material. Negative value.\n"
"In application units."

#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:247
#: appTools/ToolPaint.py:3071
msgid ""
"If checked, use 'rest machining'.\n"
"Basically it will clear copper outside PCB features,\n"
"using the biggest tool and continue with the next tools,\n"
"from bigger to smaller, to clear areas of copper that\n"
"could not be cleared by previous tool, until there is\n"
"no more copper to clear or there are no more tools.\n"
"\n"
"If not checked, use the standard algorithm."
msgstr ""
"If checked, use 'rest machining'.\n"
"Basically it will clear copper outside PCB features,\n"
"using the biggest tool and continue with the next tools,\n"
"from bigger to smaller, to clear areas of copper that\n"
"could not be cleared by previous tool, until there is\n"
"no more copper to clear or there are no more tools.\n"
"\n"
"If not checked, use the standard algorithm."

#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:260
#: appTools/ToolPaint.py:3098
msgid ""
"Selection of area to be processed.\n"
"- 'Polygon Selection' - left mouse click to add/remove polygons to be "
"processed.\n"
"- 'Area Selection' - left mouse click to start selection of the area to be "
"processed.\n"
"Keeping a modifier key pressed (CTRL or SHIFT) will allow to add multiple "
"areas.\n"
"- 'All Polygons' - the process will start after click.\n"
"- 'Reference Object' - will process the area specified by another object."
msgstr ""
"Selection of area to be processed.\n"
"- 'Polygon Selection' - left mouse click to add/remove polygons to be "
"processed.\n"
"- 'Area Selection' - left mouse click to start selection of the area to be "
"processed.\n"
"Keeping a modifier key pressed (CTRL or SHIFT) will allow to add multiple "
"areas.\n"
"- 'All Polygons' - the process will start after click.\n"
"- 'Reference Object' - will process the area specified by another object."

#: appGUI/preferences/tools/ToolsPanelizePrefGroupUI.py:27
msgid "Panelize Tool Options"
msgstr "Panelize Tool Options"

#: appGUI/preferences/tools/ToolsPanelizePrefGroupUI.py:33
msgid ""
"Create an object that contains an array of (x, y) elements,\n"
"each element is a copy of the source object spaced\n"
"at a X distance, Y distance of each other."
msgstr ""
"Create an object that contains an array of (x, y) elements,\n"
"each element is a copy of the source object spaced\n"
"at a X distance, Y distance of each other."

#: appGUI/preferences/tools/ToolsPanelizePrefGroupUI.py:50
#: appTools/ToolPanelize.py:764
msgid "Spacing cols"
msgstr "Spacing cols"

#: appGUI/preferences/tools/ToolsPanelizePrefGroupUI.py:52
#: appTools/ToolPanelize.py:766
msgid ""
"Spacing between columns of the desired panel.\n"
"In current units."
msgstr ""
"Spacing between columns of the desired panel.\n"
"In current units."

#: appGUI/preferences/tools/ToolsPanelizePrefGroupUI.py:64
#: appTools/ToolPanelize.py:776
msgid "Spacing rows"
msgstr "Spacing rows"

#: appGUI/preferences/tools/ToolsPanelizePrefGroupUI.py:66
#: appTools/ToolPanelize.py:778
msgid ""
"Spacing between rows of the desired panel.\n"
"In current units."
msgstr ""
"Spacing between rows of the desired panel.\n"
"In current units."

#: appGUI/preferences/tools/ToolsPanelizePrefGroupUI.py:79
#: appTools/ToolPanelize.py:789
msgid "Number of columns of the desired panel"
msgstr "Number of columns of the desired panel"

#: appGUI/preferences/tools/ToolsPanelizePrefGroupUI.py:91
#: appTools/ToolPanelize.py:799
msgid "Number of rows of the desired panel"
msgstr "Number of rows of the desired panel"

#: appGUI/preferences/tools/ToolsPanelizePrefGroupUI.py:97
#: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:76
#: appTools/ToolAlignObjects.py:398 appTools/ToolAlignObjects.py:434
#: appTools/ToolCalibration.py:163 appTools/ToolCalibration.py:171
#: appTools/ToolCalibration.py:891 appTools/ToolCalibration.py:1326
#: appTools/ToolCalibration.py:1343 appTools/ToolCopperThieving.py:163
#: appTools/ToolCopperThieving.py:1237 appTools/ToolCopperThieving.py:1251
#: appTools/ToolCutOut.py:2007 appTools/ToolDblSided.py:528
#: appTools/ToolDblSided.py:772 appTools/ToolFilm.py:928
#: appTools/ToolFilm.py:951 appTools/ToolImage.py:117 appTools/ToolImage.py:138
#: appTools/ToolImage.py:191 appTools/ToolIsolation.py:796
#: appTools/ToolIsolation.py:3291 appTools/ToolIsolation.py:3343
#: appTools/ToolNCC.py:792 appTools/ToolNCC.py:3741 appTools/ToolNCC.py:4215
#: appTools/ToolPaint.py:167 appTools/ToolPaint.py:3142
#: appTools/ToolPanelize.py:147 appTools/ToolPanelize.py:167
#: appTools/ToolPanelize.py:715 appTools/ToolPanelize.py:809
#: appTools/ToolTransform.py:126 appTools/ToolTransform.py:585 defaults.py:560
msgid "Gerber"
msgstr "Gerber"

#: appGUI/preferences/tools/ToolsPanelizePrefGroupUI.py:98
#: appTools/ToolPanelize.py:810
msgid "Geo"
msgstr "Geo"

#: appGUI/preferences/tools/ToolsPanelizePrefGroupUI.py:99
#: appTools/ToolPanelize.py:811
msgid "Panel Type"
msgstr "Panel Type"

#: appGUI/preferences/tools/ToolsPanelizePrefGroupUI.py:101
msgid ""
"Choose the type of object for the panel object:\n"
"- Gerber\n"
"- Geometry"
msgstr ""
"Choose the type of object for the panel object:\n"
"- Gerber\n"
"- Geometry"

#: appGUI/preferences/tools/ToolsPanelizePrefGroupUI.py:112
#: appTools/ToolPanelize.py:823
msgid ""
"Active only for Geometry panel type.\n"
"When checked the application will find\n"
"any two overlapping Line elements in the panel\n"
"and remove the overlapping parts, keeping only one of them."
msgstr ""

#: appGUI/preferences/tools/ToolsPanelizePrefGroupUI.py:120
msgid "Constrain within"
msgstr "Constrain within"

#: appGUI/preferences/tools/ToolsPanelizePrefGroupUI.py:122
#: appTools/ToolPanelize.py:833
msgid ""
"Area define by DX and DY within to constrain the panel.\n"
"DX and DY values are in current units.\n"
"Regardless of how many columns and rows are desired,\n"
"the final panel will have as many columns and rows as\n"
"they fit completely within selected area."
msgstr ""
"Area define by DX and DY within to constrain the panel.\n"
"DX and DY values are in current units.\n"
"Regardless of how many columns and rows are desired,\n"
"the final panel will have as many columns and rows as\n"
"they fit completely within selected area."

#: appGUI/preferences/tools/ToolsPanelizePrefGroupUI.py:135
#: appTools/ToolPanelize.py:845
msgid "Width (DX)"
msgstr "Width (DX)"

#: appGUI/preferences/tools/ToolsPanelizePrefGroupUI.py:137
#: appTools/ToolPanelize.py:847
msgid ""
"The width (DX) within which the panel must fit.\n"
"In current units."
msgstr ""
"The width (DX) within which the panel must fit.\n"
"In current units."

#: appGUI/preferences/tools/ToolsPanelizePrefGroupUI.py:148
#: appTools/ToolPanelize.py:856
msgid "Height (DY)"
msgstr "Height (DY)"

#: appGUI/preferences/tools/ToolsPanelizePrefGroupUI.py:150
#: appTools/ToolPanelize.py:858
msgid ""
"The height (DY)within which the panel must fit.\n"
"In current units."
msgstr ""
"The height (DY)within which the panel must fit.\n"
"In current units."

#: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:27
msgid "SolderPaste Tool Options"
msgstr "SolderPaste Tool Options"

#: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:33
msgid ""
"A tool to create GCode for dispensing\n"
"solder paste onto a PCB."
msgstr ""
"A tool to create GCode for dispensing\n"
"solder paste onto a PCB."

#: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:54
msgid "New Nozzle Dia"
msgstr "New Nozzle Dia"

#: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:56
#: appTools/ToolSolderPaste.py:1188
msgid "Diameter for the new Nozzle tool to add in the Tool Table"
msgstr "Diameter for the new Nozzle tool to add in the Tool Table"

#: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:72
#: appTools/ToolSolderPaste.py:1255
msgid "Z Dispense Start"
msgstr "Z Dispense Start"

#: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:74
#: appTools/ToolSolderPaste.py:1257
msgid "The height (Z) when solder paste dispensing starts."
msgstr "The height (Z) when solder paste dispensing starts."

#: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:85
#: appTools/ToolSolderPaste.py:1267
msgid "Z Dispense"
msgstr "Z Dispense"

#: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:87
#: appTools/ToolSolderPaste.py:1269
msgid "The height (Z) when doing solder paste dispensing."
msgstr "The height (Z) when doing solder paste dispensing."

#: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:98
#: appTools/ToolSolderPaste.py:1279
msgid "Z Dispense Stop"
msgstr "Z Dispense Stop"

#: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:100
#: appTools/ToolSolderPaste.py:1281
msgid "The height (Z) when solder paste dispensing stops."
msgstr "The height (Z) when solder paste dispensing stops."

#: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:111
#: appTools/ToolSolderPaste.py:1291
msgid "Z Travel"
msgstr "Z Travel"

#: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:113
#: appTools/ToolSolderPaste.py:1293
msgid ""
"The height (Z) for travel between pads\n"
"(without dispensing solder paste)."
msgstr ""
"The height (Z) for travel between pads\n"
"(without dispensing solder paste)."

#: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:125
#: appTools/ToolSolderPaste.py:1304
msgid "Z Toolchange"
msgstr "Z Toolchange"

#: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:127
#: appTools/ToolSolderPaste.py:1306
msgid "The height (Z) for tool (nozzle) change."
msgstr "The height (Z) for tool (nozzle) change."

#: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:136
#: appTools/ToolSolderPaste.py:1314
msgid ""
"The X,Y location for tool (nozzle) change.\n"
"The format is (x, y) where x and y are real numbers."
msgstr ""
"The X,Y location for tool (nozzle) change.\n"
"The format is (x, y) where x and y are real numbers."

#: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:150
#: appTools/ToolSolderPaste.py:1327
msgid "Feedrate (speed) while moving on the X-Y plane."
msgstr "Feedrate (speed) while moving on the X-Y plane."

#: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:163
#: appTools/ToolSolderPaste.py:1339
msgid ""
"Feedrate (speed) while moving vertically\n"
"(on Z plane)."
msgstr ""
"Feedrate (speed) while moving vertically\n"
"(on Z plane)."

#: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:175
#: appTools/ToolSolderPaste.py:1350
msgid "Feedrate Z Dispense"
msgstr "Feedrate Z Dispense"

#: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:177
msgid ""
"Feedrate (speed) while moving up vertically\n"
"to Dispense position (on Z plane)."
msgstr ""
"Feedrate (speed) while moving up vertically\n"
"to Dispense position (on Z plane)."

#: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:188
#: appTools/ToolSolderPaste.py:1362
msgid "Spindle Speed FWD"
msgstr "Spindle Speed FWD"

#: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:190
#: appTools/ToolSolderPaste.py:1364
msgid ""
"The dispenser speed while pushing solder paste\n"
"through the dispenser nozzle."
msgstr ""
"The dispenser speed while pushing solder paste\n"
"through the dispenser nozzle."

#: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:202
#: appTools/ToolSolderPaste.py:1375
msgid "Dwell FWD"
msgstr "Dwell FWD"

#: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:204
#: appTools/ToolSolderPaste.py:1377
msgid "Pause after solder dispensing."
msgstr "Pause after solder dispensing."

#: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:214
#: appTools/ToolSolderPaste.py:1386
msgid "Spindle Speed REV"
msgstr "Spindle Speed REV"

#: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:216
#: appTools/ToolSolderPaste.py:1388
msgid ""
"The dispenser speed while retracting solder paste\n"
"through the dispenser nozzle."
msgstr ""
"The dispenser speed while retracting solder paste\n"
"through the dispenser nozzle."

#: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:228
#: appTools/ToolSolderPaste.py:1399
msgid "Dwell REV"
msgstr "Dwell REV"

#: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:230
#: appTools/ToolSolderPaste.py:1401
msgid ""
"Pause after solder paste dispenser retracted,\n"
"to allow pressure equilibrium."
msgstr ""
"Pause after solder paste dispenser retracted,\n"
"to allow pressure equilibrium."

#: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:239
#: appTools/ToolSolderPaste.py:1409
msgid "Files that control the GCode generation."
msgstr "Files that control the GCode generation."

#: appGUI/preferences/tools/ToolsSubPrefGroupUI.py:27
msgid "Substractor Tool Options"
msgstr "Substractor Tool Options"

#: appGUI/preferences/tools/ToolsSubPrefGroupUI.py:33
msgid ""
"A tool to substract one Gerber or Geometry object\n"
"from another of the same type."
msgstr ""
"A tool to substract one Gerber or Geometry object\n"
"from another of the same type."

#: appGUI/preferences/tools/ToolsSubPrefGroupUI.py:38 appTools/ToolSub.py:731
msgid "Close paths"
msgstr "Close paths"

#: appGUI/preferences/tools/ToolsSubPrefGroupUI.py:39
msgid ""
"Checking this will close the paths cut by the Geometry substractor object."
msgstr ""
"Checking this will close the paths cut by the Geometry substractor object."

#: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:27
msgid "Transform Tool Options"
msgstr "Transform Tool Options"

#: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:33
msgid ""
"Various transformations that can be applied\n"
"on a application object."
msgstr ""
"Various transformations that can be applied\n"
"on a application object."

#: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:46
#: appTools/ToolTransform.py:549
msgid ""
"The reference point for Rotate, Skew, Scale, Mirror.\n"
"Can be:\n"
"- Origin -> it is the 0, 0 point\n"
"- Selection -> the center of the bounding box of the selected objects\n"
"- Point -> a custom point defined by X,Y coordinates\n"
"- Object -> the center of the bounding box of a specific object"
msgstr ""
"The reference point for Rotate, Skew, Scale, Mirror.\n"
"Can be:\n"
"- Origin -> it is the 0, 0 point\n"
"- Selection -> the center of the bounding box of the selected objects\n"
"- Point -> a custom point defined by X,Y coordinates\n"
"- Object -> the center of the bounding box of a specific object"

#: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:72
#: appTools/ToolTransform.py:581
msgid "The type of object used as reference."
msgstr "The type of object used as reference."

#: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:107
msgid "Skew"
msgstr "Skew"

#: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:126
#: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:140
#: appTools/ToolCalibration.py:1200 appTools/ToolCalibration.py:1213
msgid ""
"Angle for Skew action, in degrees.\n"
"Float number between -360 and 359."
msgstr ""
"Angle for Skew action, in degrees.\n"
"Float number between -360 and 359."

#: appGUI/preferences/utilities/AutoCompletePrefGroupUI.py:27
msgid "Autocompleter Keywords"
msgstr "Autocompleter Keywords"

#: appGUI/preferences/utilities/AutoCompletePrefGroupUI.py:30
#: appGUI/preferences/utilities/FAExcPrefGroupUI.py:40
#: appGUI/preferences/utilities/FAGcoPrefGroupUI.py:30
#: appGUI/preferences/utilities/FAGrbPrefGroupUI.py:30
msgid "Restore"
msgstr "Restore"

#: appGUI/preferences/utilities/AutoCompletePrefGroupUI.py:31
msgid "Restore the autocompleter keywords list to the default state."
msgstr "Restore the autocompleter keywords list to the default state."

#: appGUI/preferences/utilities/AutoCompletePrefGroupUI.py:33
msgid "Delete all autocompleter keywords from the list."
msgstr "Delete all autocompleter keywords from the list."

#: appGUI/preferences/utilities/AutoCompletePrefGroupUI.py:41
msgid "Keywords list"
msgstr "Keywords list"

#: appGUI/preferences/utilities/AutoCompletePrefGroupUI.py:43
msgid ""
"List of keywords used by\n"
"the autocompleter in FlatCAM.\n"
"The autocompleter is installed\n"
"in the Code Editor and for the Tcl Shell."
msgstr ""
"List of keywords used by\n"
"the autocompleter in FlatCAM.\n"
"The autocompleter is installed\n"
"in the Code Editor and for the Tcl Shell."

#: appGUI/preferences/utilities/AutoCompletePrefGroupUI.py:64
#: appGUI/preferences/utilities/FAExcPrefGroupUI.py:73
#: appGUI/preferences/utilities/FAGcoPrefGroupUI.py:63
#: appGUI/preferences/utilities/FAGrbPrefGroupUI.py:62
msgid "Extension"
msgstr "Extension"

#: appGUI/preferences/utilities/AutoCompletePrefGroupUI.py:65
msgid "A keyword to be added or deleted to the list."
msgstr "A keyword to be added or deleted to the list."

#: appGUI/preferences/utilities/AutoCompletePrefGroupUI.py:73
msgid "Add keyword"
msgstr "Add keyword"

#: appGUI/preferences/utilities/AutoCompletePrefGroupUI.py:74
msgid "Add a keyword to the list"
msgstr "Add a keyword to the list"

#: appGUI/preferences/utilities/AutoCompletePrefGroupUI.py:75
msgid "Delete keyword"
msgstr "Delete keyword"

#: appGUI/preferences/utilities/AutoCompletePrefGroupUI.py:76
msgid "Delete a keyword from the list"
msgstr "Delete a keyword from the list"

#: appGUI/preferences/utilities/FAExcPrefGroupUI.py:27
msgid "Excellon File associations"
msgstr "Excellon File associations"

#: appGUI/preferences/utilities/FAExcPrefGroupUI.py:41
#: appGUI/preferences/utilities/FAGcoPrefGroupUI.py:31
#: appGUI/preferences/utilities/FAGrbPrefGroupUI.py:31
msgid "Restore the extension list to the default state."
msgstr "Restore the extension list to the default state."

#: appGUI/preferences/utilities/FAExcPrefGroupUI.py:43
#: appGUI/preferences/utilities/FAGcoPrefGroupUI.py:33
#: appGUI/preferences/utilities/FAGrbPrefGroupUI.py:33
msgid "Delete all extensions from the list."
msgstr "Delete all extensions from the list."

#: appGUI/preferences/utilities/FAExcPrefGroupUI.py:51
#: appGUI/preferences/utilities/FAGcoPrefGroupUI.py:41
#: appGUI/preferences/utilities/FAGrbPrefGroupUI.py:41
msgid "Extensions list"
msgstr "Extensions list"

#: appGUI/preferences/utilities/FAExcPrefGroupUI.py:53
#: appGUI/preferences/utilities/FAGcoPrefGroupUI.py:43
#: appGUI/preferences/utilities/FAGrbPrefGroupUI.py:43
msgid ""
"List of file extensions to be\n"
"associated with FlatCAM."
msgstr ""
"List of file extensions to be\n"
"associated with FlatCAM."

#: appGUI/preferences/utilities/FAExcPrefGroupUI.py:74
#: appGUI/preferences/utilities/FAGcoPrefGroupUI.py:64
#: appGUI/preferences/utilities/FAGrbPrefGroupUI.py:63
msgid "A file extension to be added or deleted to the list."
msgstr "A file extension to be added or deleted to the list."

#: appGUI/preferences/utilities/FAExcPrefGroupUI.py:82
#: appGUI/preferences/utilities/FAGcoPrefGroupUI.py:72
#: appGUI/preferences/utilities/FAGrbPrefGroupUI.py:71
msgid "Add Extension"
msgstr "Add Extension"

#: appGUI/preferences/utilities/FAExcPrefGroupUI.py:83
#: appGUI/preferences/utilities/FAGcoPrefGroupUI.py:73
#: appGUI/preferences/utilities/FAGrbPrefGroupUI.py:72
msgid "Add a file extension to the list"
msgstr "Add a file extension to the list"

#: appGUI/preferences/utilities/FAExcPrefGroupUI.py:84
#: appGUI/preferences/utilities/FAGcoPrefGroupUI.py:74
#: appGUI/preferences/utilities/FAGrbPrefGroupUI.py:73
msgid "Delete Extension"
msgstr "Delete Extension"

#: appGUI/preferences/utilities/FAExcPrefGroupUI.py:85
#: appGUI/preferences/utilities/FAGcoPrefGroupUI.py:75
#: appGUI/preferences/utilities/FAGrbPrefGroupUI.py:74
msgid "Delete a file extension from the list"
msgstr "Delete a file extension from the list"

#: appGUI/preferences/utilities/FAExcPrefGroupUI.py:92
#: appGUI/preferences/utilities/FAGcoPrefGroupUI.py:82
#: appGUI/preferences/utilities/FAGrbPrefGroupUI.py:81
msgid "Apply Association"
msgstr "Apply Association"

#: appGUI/preferences/utilities/FAExcPrefGroupUI.py:93
#: appGUI/preferences/utilities/FAGcoPrefGroupUI.py:83
#: appGUI/preferences/utilities/FAGrbPrefGroupUI.py:82
msgid ""
"Apply the file associations between\n"
"FlatCAM and the files with above extensions.\n"
"They will be active after next logon.\n"
"This work only in Windows."
msgstr ""
"Apply the file associations between\n"
"FlatCAM and the files with above extensions.\n"
"They will be active after next logon.\n"
"This work only in Windows."

#: appGUI/preferences/utilities/FAGcoPrefGroupUI.py:27
msgid "GCode File associations"
msgstr "GCode File associations"

#: appGUI/preferences/utilities/FAGrbPrefGroupUI.py:27
msgid "Gerber File associations"
msgstr "Gerber File associations"

#: appObjects/AppObject.py:157
#, python-brace-format
msgid ""
"Object ({kind}) failed because: {error} \n"
"\n"
msgstr ""
"Object ({kind}) failed because: {error} \n"
"\n"

#: appObjects/AppObject.py:176
msgid "Converting units to "
msgstr "Converting units to "

#: appObjects/AppObject.py:248 appObjects/FlatCAMGeometry.py:128
#: appObjects/FlatCAMGeometry.py:514 appObjects/FlatCAMGeometry.py:993
#: appObjects/FlatCAMGerber.py:522 appObjects/FlatCAMGerber.py:665
#: appTools/ToolCutOut.py:446 appTools/ToolIsolation.py:1585
#: appTools/ToolIsolation.py:1747 appTools/ToolIsolation.py:1940 camlib.py:1180
#: camlib.py:1241
msgid "Rough"
msgstr "Rough"

#: appObjects/AppObject.py:302
msgid "CREATE A NEW FLATCAM TCL SCRIPT"
msgstr "CREATE A NEW FLATCAM TCL SCRIPT"

#: appObjects/AppObject.py:303
msgid "TCL Tutorial is here"
msgstr "TCL Tutorial is here"

#: appObjects/AppObject.py:305
msgid "FlatCAM commands list"
msgstr "FlatCAM commands list"

#: appObjects/AppObject.py:306
msgid ""
"Type >help< followed by Run Code for a list of FlatCAM Tcl Commands "
"(displayed in Tcl Shell)."
msgstr ""
"Type >help< followed by Run Code for a list of FlatCAM Tcl Commands "
"(displayed in Tcl Shell)."

#: appObjects/AppObject.py:357 appObjects/AppObject.py:363
#: appObjects/AppObject.py:369 appObjects/AppObject.py:375
#: appObjects/AppObject.py:381 appObjects/AppObject.py:387
msgid "created/selected"
msgstr "created/selected"

#: appObjects/FlatCAMCNCJob.py:630 appObjects/FlatCAMDocument.py:71
#: appObjects/FlatCAMScript.py:82
msgid "<span style=\"color:green;\"><b>Basic</b></span>"
msgstr "<span style=\"color:green;\"><b>Basic</b></span>"

#: appObjects/FlatCAMCNCJob.py:637 appObjects/FlatCAMDocument.py:75
#: appObjects/FlatCAMScript.py:86
msgid "<span style=\"color:red;\"><b>Advanced</b></span>"
msgstr "<span style=\"color:red;\"><b>Advanced</b></span>"

#: appObjects/FlatCAMCNCJob.py:783
#, fuzzy
#| msgid "Click on Start point ..."
msgid "Click on canvas to add a Probe Point..."
msgstr "Click on Start point ..."

#: appObjects/FlatCAMCNCJob.py:979
msgid "Point is not within the object area. Choose another point."
msgstr ""

#: appObjects/FlatCAMCNCJob.py:999
#, fuzzy
#| msgid ""
#| "Zone added. Click to start adding next zone or right click to finish."
msgid ""
"Added a Probe Point... Click again to add another or right click to "
"finish ..."
msgstr "Zone added. Click to start adding next zone or right click to finish."

#: appObjects/FlatCAMCNCJob.py:1021
#, fuzzy
#| msgid "Finished G-Code processing..."
msgid "Finished adding Probe Points..."
msgstr "Finished G-Code processing..."

#: appObjects/FlatCAMCNCJob.py:1231
#, fuzzy
#| msgid "Click to place ..."
msgid "COM list updated ..."
msgstr "Click to place ..."

#: appObjects/FlatCAMCNCJob.py:1267
#, fuzzy
#| msgid "Connect"
msgid "Connected"
msgstr "Connect"

#: appObjects/FlatCAMCNCJob.py:1278
msgid "Port connected"
msgstr ""

#: appObjects/FlatCAMCNCJob.py:1282
msgid "Could not connect to GRBL on port"
msgstr ""

#: appObjects/FlatCAMCNCJob.py:1299
msgid "Port is connected. Disconnecting"
msgstr ""

#: appObjects/FlatCAMCNCJob.py:1301
#, fuzzy
#| msgid "Could not retrieve box object"
msgid "Could not connect to port"
msgstr "Could not retrieve box object"

#: appObjects/FlatCAMCNCJob.py:1331 appObjects/FlatCAMCNCJob.py:1761
#, fuzzy
#| msgid "Opening G-Code."
msgid "Sending GCode..."
msgstr "Opening G-Code."

#: appObjects/FlatCAMCNCJob.py:1460
msgid "GRBL is doing a home cycle."
msgstr ""

#: appObjects/FlatCAMCNCJob.py:1466
msgid "GRBL software reset was sent."
msgstr ""

#: appObjects/FlatCAMCNCJob.py:1474
msgid "GRBL resumed."
msgstr ""

#: appObjects/FlatCAMCNCJob.py:1478
msgid "GRBL paused."
msgstr ""

#: appObjects/FlatCAMCNCJob.py:1620 appObjects/FlatCAMCNCJob.py:1810
#: appObjects/FlatCAMCNCJob.py:1895 appTools/ToolSolderPaste.py:1066
msgid "Export cancelled ..."
msgstr "Export cancelled ..."

#: appObjects/FlatCAMCNCJob.py:1644 appObjects/FlatCAMCNCJob.py:1931
#: appObjects/FlatCAMScript.py:134 app_Main.py:7824
msgid "Loading..."
msgstr "Loading..."

#: appObjects/FlatCAMCNCJob.py:1648
#, fuzzy
#| msgid "There is no such parameter"
msgid "There is nothing to view"
msgstr "There is no such parameter"

#: appObjects/FlatCAMCNCJob.py:1654
#, fuzzy
#| msgid "Gcode Viewer"
msgid "Code Viewer"
msgstr "Gcode Viewer"

#: appObjects/FlatCAMCNCJob.py:1692
#, fuzzy
#| msgid "Loaded Machine Code into Code Editor"
msgid "Loaded Machine Code into Code Viewer"
msgstr "Loaded Machine Code into Code Editor"

#: appObjects/FlatCAMCNCJob.py:1737
#, fuzzy
#| msgid "Failed to open config file"
msgid "Failed to open height map file"
msgstr "Failed to open config file"

#: appObjects/FlatCAMCNCJob.py:1787
msgid "Finished probing. Doing the autolevelling."
msgstr ""

#: appObjects/FlatCAMCNCJob.py:1792
msgid "Sending probing GCode to the GRBL controller."
msgstr ""

#: appObjects/FlatCAMCNCJob.py:1833
msgid "Empty GRBL heightmap."
msgstr ""

#: appObjects/FlatCAMCNCJob.py:1837
#, fuzzy
#| msgid "Finished G-Code processing..."
msgid "Finished autolevelling."
msgstr "Finished G-Code processing..."

#: appObjects/FlatCAMCNCJob.py:1851
msgid "Plotting..."
msgstr "Plotting..."

#: appObjects/FlatCAMCNCJob.py:1921
msgid "File saved to"
msgstr "File saved to"

#: appObjects/FlatCAMCNCJob.py:1945
#, fuzzy
#| msgid "Gcode Viewer"
msgid "Code Review"
msgstr "Gcode Viewer"

#: appObjects/FlatCAMCNCJob.py:2128
msgid "This CNCJob object can't be processed because it is a"
msgstr "This CNCJob object can't be processed because it is a"

#: appObjects/FlatCAMCNCJob.py:2130
msgid "CNCJob object"
msgstr "CNCJob object"

#: appObjects/FlatCAMCNCJob.py:2240
msgid ""
"G-code does not have a G94 code.\n"
"Append Code snippet will not be used.."
msgstr ""

#: appObjects/FlatCAMDocument.py:173
msgid "Document Editor"
msgstr "Document Editor"

#: appObjects/FlatCAMExcellon.py:848 appObjects/FlatCAMExcellon.py:956
#: appTools/ToolDrilling.py:1612 appTools/ToolMilling.py:1038
#: appTools/ToolMilling.py:1154 appTools/ToolMilling.py:1340
msgid "Please select one or more tools from the list and try again."
msgstr "Please select one or more tools from the list and try again."

#: appObjects/FlatCAMExcellon.py:853 appTools/ToolMilling.py:1045
msgid "Milling tool for DRILLS is larger than hole size. Cancelled."
msgstr "Milling tool for DRILLS is larger than hole size. Cancelled."

#: appObjects/FlatCAMExcellon.py:876 appObjects/FlatCAMExcellon.py:976
#: appTools/ToolDrilling.py:1762 appTools/ToolDrilling.py:1827
#: appTools/ToolMilling.py:1071 appTools/ToolMilling.py:1175
#: appTools/ToolMilling.py:1360 tclCommands/TclCommandDrillcncjob.py:195
msgid "Tool_nr"
msgstr "Tool_nr"

#: appObjects/FlatCAMExcellon.py:876 appObjects/FlatCAMExcellon.py:976
#: appTools/ToolDrilling.py:1762 appTools/ToolDrilling.py:1827
#: appTools/ToolMilling.py:1071 appTools/ToolMilling.py:1175
#: appTools/ToolMilling.py:1360 tclCommands/TclCommandDrillcncjob.py:195
msgid "Drills_Nr"
msgstr "Drills_Nr"

#: appObjects/FlatCAMExcellon.py:876 appObjects/FlatCAMExcellon.py:976
#: appTools/ToolDrilling.py:1762 appTools/ToolDrilling.py:1827
#: appTools/ToolMilling.py:1071 appTools/ToolMilling.py:1175
#: appTools/ToolMilling.py:1360 tclCommands/TclCommandDrillcncjob.py:195
msgid "Slots_Nr"
msgstr "Slots_Nr"

#: appObjects/FlatCAMExcellon.py:965 appTools/ToolMilling.py:1163
msgid "Milling tool for SLOTS is larger than hole size. Cancelled."
msgstr "Milling tool for SLOTS is larger than hole size. Cancelled."

#: appObjects/FlatCAMGeometry.py:128 appObjects/FlatCAMGeometry.py:1374
#: appObjects/FlatCAMGeometry.py:1375 appObjects/FlatCAMGeometry.py:1384
msgid "Iso"
msgstr "Iso"

#: appObjects/FlatCAMGeometry.py:128
msgid "Finish"
msgstr "Finish"

#: appObjects/FlatCAMGeometry.py:388 appObjects/FlatCAMGeometry.py:831
#: appObjects/FlatCAMGeometry.py:894 appTools/ToolDrilling.py:705
#: appTools/ToolDrilling.py:990 appTools/ToolDrilling.py:1037
#: appTools/ToolIsolation.py:525 appTools/ToolIsolation.py:638
#: appTools/ToolIsolation.py:704 appTools/ToolMilling.py:628
#: appTools/ToolMilling.py:749 appTools/ToolMilling.py:794
#: appTools/ToolNCC.py:271 appTools/ToolNCC.py:337 appTools/ToolNCC.py:700
#: appTools/ToolPaint.py:252 appTools/ToolPaint.py:316
#: appTools/ToolPaint.py:654
msgid "Multiple Tools"
msgstr "Multiple Tools"

#: appObjects/FlatCAMGeometry.py:549
msgid "Add from Tool DB"
msgstr "Add from Tool DB"

#: appObjects/FlatCAMGeometry.py:826 appObjects/FlatCAMGeometry.py:865
#: appTools/ToolDrilling.py:754 appTools/ToolDrilling.py:983
#: appTools/ToolDrilling.py:1021 appTools/ToolIsolation.py:633
#: appTools/ToolIsolation.py:668 appTools/ToolMilling.py:744
#: appTools/ToolMilling.py:779 appTools/ToolNCC.py:266 appTools/ToolNCC.py:301
#: appTools/ToolPaint.py:247 appTools/ToolPaint.py:282 app_Main.py:2188
msgid "No Tool Selected"
msgstr "No Tool Selected"

#: appObjects/FlatCAMGeometry.py:1012
msgid "Tool added in Tool Table."
msgstr "Tool added in Tool Table."

#: appObjects/FlatCAMGeometry.py:1121 appObjects/FlatCAMGeometry.py:1130
msgid "Failed. Select a tool to copy."
msgstr "Failed. Select a tool to copy."

#: appObjects/FlatCAMGeometry.py:1159
msgid "Tool was copied in Tool Table."
msgstr "Tool was copied in Tool Table."

#: appObjects/FlatCAMGeometry.py:1189
msgid "Tool was edited in Tool Table."
msgstr "Tool was edited in Tool Table."

#: appObjects/FlatCAMGeometry.py:1218 appObjects/FlatCAMGeometry.py:1227
msgid "Failed. Select a tool to delete."
msgstr "Failed. Select a tool to delete."

#: appObjects/FlatCAMGeometry.py:1251
msgid "Tool was deleted in Tool Table."
msgstr "Tool was deleted in Tool Table."

#: appObjects/FlatCAMGeometry.py:1288 appObjects/FlatCAMGeometry.py:1297
msgid ""
"Disabled because the tool is V-shape.\n"
"For V-shape tools the depth of cut is\n"
"calculated from other parameters like:\n"
"- 'V-tip Angle' -> angle at the tip of the tool\n"
"- 'V-tip Dia' -> diameter at the tip of the tool \n"
"- Tool Dia -> 'Dia' column found in the Tool Table\n"
"NB: a value of zero means that Tool Dia = 'V-tip Dia'"
msgstr ""
"Disabled because the tool is V-shape.\n"
"For V-shape tools the depth of cut is\n"
"calculated from other parameters like:\n"
"- 'V-tip Angle' -> angle at the tip of the tool\n"
"- 'V-tip Dia' -> diameter at the tip of the tool \n"
"- Tool Dia -> 'Dia' column found in the Tool Table\n"
"NB: a value of zero means that Tool Dia = 'V-tip Dia'"

#: appObjects/FlatCAMGeometry.py:1710 appTools/ToolDrilling.py:1256
#: appTools/ToolMilling.py:1256
msgid "Focus Z"
msgstr "Focus Z"

#: appObjects/FlatCAMGeometry.py:1729 appTools/ToolDrilling.py:1278
#: appTools/ToolMilling.py:1275
msgid "Laser Power"
msgstr "Laser Power"

#: appObjects/FlatCAMGeometry.py:1782
msgid "This Geometry can't be processed because it is"
msgstr "This Geometry can't be processed because it is"

#: appObjects/FlatCAMGeometry.py:1782
msgid "geometry"
msgstr "geometry"

#: appObjects/FlatCAMGeometry.py:1813
msgid "Failed. No tool selected in the tool table ..."
msgstr "Failed. No tool selected in the tool table ..."

#: appObjects/FlatCAMGeometry.py:1914 appObjects/FlatCAMGeometry.py:2069
msgid ""
"Tool Offset is selected in Tool Table but no value is provided.\n"
"Add a Tool Offset or change the Offset Type."
msgstr ""
"Tool Offset is selected in Tool Table but no value is provided.\n"
"Add a Tool Offset or change the Offset Type."

#: appObjects/FlatCAMGeometry.py:1982 appObjects/FlatCAMGeometry.py:2132
msgid "G-Code parsing in progress..."
msgstr "G-Code parsing in progress..."

#: appObjects/FlatCAMGeometry.py:1984 appObjects/FlatCAMGeometry.py:2134
msgid "G-Code parsing finished..."
msgstr "G-Code parsing finished..."

#: appObjects/FlatCAMGeometry.py:1992
msgid "Finished G-Code processing"
msgstr "Finished G-Code processing"

#: appObjects/FlatCAMGeometry.py:1994 appObjects/FlatCAMGeometry.py:2146
msgid "G-Code processing failed with error"
msgstr "G-Code processing failed with error"

#: appObjects/FlatCAMGeometry.py:2038 appTools/ToolSolderPaste.py:866
msgid "Cancelled. Empty file, it has no geometry"
msgstr "Cancelled. Empty file, it has no geometry"

#: appObjects/FlatCAMGeometry.py:2144 appObjects/FlatCAMGeometry.py:2314
msgid "Finished G-Code processing..."
msgstr "Finished G-Code processing..."

#: appObjects/FlatCAMGeometry.py:2163 appObjects/FlatCAMGeometry.py:2167
#: appObjects/FlatCAMGeometry.py:2319 appTools/ToolDrilling.py:1960
#: appTools/ToolMilling.py:1417
msgid "Generating CNC Code"
msgstr "Generating CNC Code"

#: appObjects/FlatCAMGeometry.py:2165 appObjects/FlatCAMGeometry.py:2169
#: appObjects/FlatCAMGeometry.py:2321
msgid "CNCjob created"
msgstr "CNCjob created"

#: appObjects/FlatCAMGeometry.py:2352 appObjects/FlatCAMGeometry.py:2361
#: appParsers/ParseGerber.py:1956 appParsers/ParseGerber.py:1966
msgid "Scale factor has to be a number: integer or float."
msgstr "Scale factor has to be a number: integer or float."

#: appObjects/FlatCAMGeometry.py:2424
msgid "Geometry Scale done."
msgstr "Geometry Scale done."

#: appObjects/FlatCAMGeometry.py:2441 appParsers/ParseGerber.py:2082
msgid ""
"An (x,y) pair of values are needed. Probable you entered only one value in "
"the Offset field."
msgstr ""
"An (x,y) pair of values are needed. Probable you entered only one value in "
"the Offset field."

#: appObjects/FlatCAMGeometry.py:2497
msgid "Geometry Offset done."
msgstr "Geometry Offset done."

#: appObjects/FlatCAMGeometry.py:2526
msgid ""
"The Toolchange X,Y field in Edit -> Preferences has to be in the format (x, "
"y)\n"
"but now there is only one value, not two."
msgstr ""
"The Toolchange X,Y field in Edit -> Preferences has to be in the format (x, "
"y)\n"
"but now there is only one value, not two."

#: appObjects/FlatCAMGeometry.py:2629 appTools/ToolDrilling.py:1376
#: appTools/ToolMilling.py:1488
msgid "Delete failed. There are no exclusion areas to delete."
msgstr "Delete failed. There are no exclusion areas to delete."

#: appObjects/FlatCAMGeometry.py:2646 appTools/ToolDrilling.py:1393
#: appTools/ToolMilling.py:1505
msgid "Delete failed. Nothing is selected."
msgstr "Delete failed. Nothing is selected."

#: appObjects/FlatCAMGerber.py:347 appTools/ToolIsolation.py:1302
msgid "Buffering solid geometry"
msgstr "Buffering solid geometry"

#: appObjects/FlatCAMGerber.py:354 appTools/ToolIsolation.py:1324
msgid "Done"
msgstr "Done"

#: appObjects/FlatCAMGerber.py:380 appObjects/FlatCAMGerber.py:406
msgid "Operation could not be done."
msgstr "Operation could not be done."

#: appObjects/FlatCAMGerber.py:538 appObjects/FlatCAMGerber.py:612
#: appTools/ToolIsolation.py:1545 appTools/ToolIsolation.py:1913
#: appTools/ToolNCC.py:1806 appTools/ToolNCC.py:2771 appTools/ToolNCC.py:3150
msgid "Isolation geometry could not be generated."
msgstr "Isolation geometry could not be generated."

#: appObjects/FlatCAMGerber.py:563 appObjects/FlatCAMGerber.py:690
#: appTools/ToolIsolation.py:1612 appTools/ToolIsolation.py:1808
#: appTools/ToolIsolation.py:1997
msgid "Isolation geometry created"
msgstr "Isolation geometry created"

#: appObjects/FlatCAMGerber.py:972
msgid "Plotting Apertures"
msgstr "Plotting Apertures"

#: appObjects/FlatCAMObj.py:241
msgid "Name changed from"
msgstr "Name changed from"

#: appObjects/FlatCAMObj.py:241
msgid "to"
msgstr "to"

#: appObjects/FlatCAMObj.py:252
msgid "Offsetting..."
msgstr "Offsetting..."

#: appObjects/FlatCAMObj.py:266 appObjects/FlatCAMObj.py:271
msgid "Scaling could not be executed."
msgstr "Scaling could not be executed."

#: appObjects/FlatCAMObj.py:275 appObjects/FlatCAMObj.py:283
msgid "Scale done."
msgstr "Scale done."

#: appObjects/FlatCAMObj.py:281
msgid "Scaling..."
msgstr "Scaling..."

#: appObjects/FlatCAMObj.py:299
msgid "Skewing..."
msgstr "Skewing..."

#: appObjects/FlatCAMScript.py:160
msgid "Script Editor"
msgstr "Script Editor"

#: appObjects/ObjectCollection.py:519
#, python-brace-format
msgid "Object renamed from <b>{old}</b> to <b>{new}</b>"
msgstr "Object renamed from <b>{old}</b> to <b>{new}</b>"

#: appObjects/ObjectCollection.py:933 appObjects/ObjectCollection.py:939
#: appObjects/ObjectCollection.py:945 appObjects/ObjectCollection.py:951
#: appObjects/ObjectCollection.py:957 appObjects/ObjectCollection.py:963
#: app_Main.py:6701 app_Main.py:6707 app_Main.py:6713 app_Main.py:6719
msgid "selected"
msgstr "selected"

#: appObjects/ObjectCollection.py:994
msgid "Cause of error"
msgstr "Cause of error"

#: appObjects/ObjectCollection.py:1195
msgid "All objects are selected."
msgstr "All objects are selected."

#: appObjects/ObjectCollection.py:1205
msgid "Objects selection is cleared."
msgstr "Objects selection is cleared."

#: appParsers/ParseExcellon.py:292
msgid "This is GCODE mark"
msgstr "This is GCODE mark"

#: appParsers/ParseExcellon.py:436
msgid ""
"No tool diameter info's. See shell.\n"
"A tool change event: T"
msgstr ""
"No tool diameter info's. See shell.\n"
"A tool change event: T"

#: appParsers/ParseExcellon.py:439
msgid ""
"was found but the Excellon file have no informations regarding the tool "
"diameters therefore the application will try to load it by using some 'fake' "
"diameters.\n"
"The user needs to edit the resulting Excellon object and change the "
"diameters to reflect the real diameters."
msgstr ""
"was found but the Excellon file have no informations regarding the tool "
"diameters therefore the application will try to load it by using some 'fake' "
"diameters.\n"
"The user needs to edit the resulting Excellon object and change the "
"diameters to reflect the real diameters."

#: appParsers/ParseExcellon.py:975
msgid ""
"Excellon Parser error.\n"
"Parsing Failed. Line"
msgstr ""
"Excellon Parser error.\n"
"Parsing Failed. Line"

#: appParsers/ParseFont.py:303
msgid "Font not supported, try another one."
msgstr "Font not supported, try another one."

#: appParsers/ParseGerber.py:426
msgid "Gerber processing. Parsing"
msgstr "Gerber processing. Parsing"

#: appParsers/ParseGerber.py:426 appParsers/ParseHPGL2.py:201
msgid "lines"
msgstr "lines"

#: appParsers/ParseGerber.py:1037 appParsers/ParseGerber.py:1137
#: appParsers/ParseHPGL2.py:294 appParsers/ParseHPGL2.py:308
#: appParsers/ParseHPGL2.py:327 appParsers/ParseHPGL2.py:351
#: appParsers/ParseHPGL2.py:386
msgid "Coordinates missing, line ignored"
msgstr "Coordinates missing, line ignored"

#: appParsers/ParseGerber.py:1039 appParsers/ParseGerber.py:1139
msgid "GERBER file might be CORRUPT. Check the file !!!"
msgstr "GERBER file might be CORRUPT. Check the file !!!"

#: appParsers/ParseGerber.py:1093
msgid ""
"Region does not have enough points. File will be processed but there are "
"parser errors. Line number"
msgstr ""
"Region does not have enough points. File will be processed but there are "
"parser errors. Line number"

#: appParsers/ParseGerber.py:1523 appParsers/ParseHPGL2.py:421
msgid "Gerber processing. Joining polygons"
msgstr "Gerber processing. Joining polygons"

#: appParsers/ParseGerber.py:1541
msgid "Gerber processing. Applying Gerber polarity."
msgstr "Gerber processing. Applying Gerber polarity."

#: appParsers/ParseGerber.py:1601
msgid "Gerber Line"
msgstr "Gerber Line"

#: appParsers/ParseGerber.py:1601
msgid "Gerber Line Content"
msgstr "Gerber Line Content"

#: appParsers/ParseGerber.py:1603
msgid "Gerber Parser ERROR"
msgstr "Gerber Parser ERROR"

#: appParsers/ParseGerber.py:2046
msgid "Gerber Scale done."
msgstr "Gerber Scale done."

#: appParsers/ParseGerber.py:2138
msgid "Gerber Offset done."
msgstr "Gerber Offset done."

#: appParsers/ParseGerber.py:2214
msgid "Gerber Mirror done."
msgstr "Gerber Mirror done."

#: appParsers/ParseGerber.py:2288
msgid "Gerber Skew done."
msgstr "Gerber Skew done."

#: appParsers/ParseGerber.py:2350
msgid "Gerber Rotate done."
msgstr "Gerber Rotate done."

#: appParsers/ParseGerber.py:2507
msgid "Gerber Buffer done."
msgstr "Gerber Buffer done."

#: appParsers/ParseHPGL2.py:201
msgid "HPGL2 processing. Parsing"
msgstr "HPGL2 processing. Parsing"

#: appParsers/ParseHPGL2.py:433
msgid "HPGL2 Line"
msgstr "HPGL2 Line"

#: appParsers/ParseHPGL2.py:433
msgid "HPGL2 Line Content"
msgstr "HPGL2 Line Content"

#: appParsers/ParseHPGL2.py:434
msgid "HPGL2 Parser ERROR"
msgstr "HPGL2 Parser ERROR"

#: appProcess.py:172
msgid "processes running."
msgstr "processes running."

#: appTools/ToolAlignObjects.py:32 appTools/ToolAlignObjects.py:360
msgid "Align Objects"
msgstr "Align Objects"

#: appTools/ToolAlignObjects.py:104
msgid "Align Tool"
msgstr "Align Tool"

#: appTools/ToolAlignObjects.py:149
msgid "There is no aligned FlatCAM object selected..."
msgstr "There is no aligned FlatCAM object selected..."

#: appTools/ToolAlignObjects.py:159
msgid "There is no aligner FlatCAM object selected..."
msgstr "There is no aligner FlatCAM object selected..."

#: appTools/ToolAlignObjects.py:181 appTools/ToolAlignObjects.py:245
msgid "First Point"
msgstr "First Point"

#: appTools/ToolAlignObjects.py:181 appTools/ToolAlignObjects.py:260
msgid "Click on the START point."
msgstr "Click on the START point."

#: appTools/ToolAlignObjects.py:240 appTools/ToolCalibration.py:276
#: appTools/ToolDblSided.py:285
msgid "Cancelled by user request."
msgstr "Cancelled by user request."

#: appTools/ToolAlignObjects.py:245 appTools/ToolAlignObjects.py:267
msgid "Click on the DESTINATION point."
msgstr "Click on the DESTINATION point."

#: appTools/ToolAlignObjects.py:245 appTools/ToolAlignObjects.py:260
#: appTools/ToolAlignObjects.py:267
msgid "Or right click to cancel."
msgstr "Or right click to cancel."

#: appTools/ToolAlignObjects.py:260 appTools/ToolAlignObjects.py:267
#: appTools/ToolFiducials.py:718
msgid "Second Point"
msgstr "Second Point"

#: appTools/ToolAlignObjects.py:386
msgid "MOVING object"
msgstr "MOVING object"

#: appTools/ToolAlignObjects.py:390
msgid ""
"Specify the type of object to be aligned.\n"
"It can be of type: Gerber or Excellon.\n"
"The selection here decide the type of objects that will be\n"
"in the Object combobox."
msgstr ""
"Specify the type of object to be aligned.\n"
"It can be of type: Gerber or Excellon.\n"
"The selection here decide the type of objects that will be\n"
"in the Object combobox."

#: appTools/ToolAlignObjects.py:411
msgid "Object to be aligned."
msgstr "Object to be aligned."

#: appTools/ToolAlignObjects.py:423
#, fuzzy
#| msgid "TARGET object"
msgid "DESTINATION object"
msgstr "TARGET object"

#: appTools/ToolAlignObjects.py:425
msgid ""
"Specify the type of object to be aligned to.\n"
"It can be of type: Gerber or Excellon.\n"
"The selection here decide the type of objects that will be\n"
"in the Object combobox."
msgstr ""
"Specify the type of object to be aligned to.\n"
"It can be of type: Gerber or Excellon.\n"
"The selection here decide the type of objects that will be\n"
"in the Object combobox."

#: appTools/ToolAlignObjects.py:447
msgid "Object to be aligned to. Aligner."
msgstr "Object to be aligned to. Aligner."

#: appTools/ToolAlignObjects.py:460
msgid "Alignment Type"
msgstr "Alignment Type"

#: appTools/ToolAlignObjects.py:462
msgid ""
"The type of alignment can be:\n"
"- Single Point -> it require a single point of sync, the action will be a "
"translation\n"
"- Dual Point -> it require two points of sync, the action will be "
"translation followed by rotation"
msgstr ""
"The type of alignment can be:\n"
"- Single Point -> it require a single point of sync, the action will be a "
"translation\n"
"- Dual Point -> it require two points of sync, the action will be "
"translation followed by rotation"

#: appTools/ToolAlignObjects.py:468
msgid "Single Point"
msgstr "Single Point"

#: appTools/ToolAlignObjects.py:469
msgid "Dual Point"
msgstr "Dual Point"

#: appTools/ToolAlignObjects.py:481
msgid "Align Object"
msgstr "Align Object"

#: appTools/ToolAlignObjects.py:483
msgid ""
"Align the specified object to the aligner object.\n"
"If only one point is used then it assumes translation.\n"
"If tho points are used it assume translation and rotation."
msgstr ""
"Align the specified object to the aligner object.\n"
"If only one point is used then it assumes translation.\n"
"If tho points are used it assume translation and rotation."

#: appTools/ToolAlignObjects.py:498 appTools/ToolCalculators.py:372
#: appTools/ToolCalibration.py:1378 appTools/ToolCopperThieving.py:1577
#: appTools/ToolCorners.py:444 appTools/ToolCutOut.py:2392
#: appTools/ToolDblSided.py:947 appTools/ToolDrilling.py:2649
#: appTools/ToolEtchCompensation.py:458 appTools/ToolExtractDrills.py:702
#: appTools/ToolFiducials.py:932 appTools/ToolFilm.py:1383
#: appTools/ToolInvertGerber.py:286 appTools/ToolIsolation.py:3429
#: appTools/ToolMilling.py:2324 appTools/ToolNCC.py:4270
#: appTools/ToolOptimal.py:593 appTools/ToolPaint.py:3193
#: appTools/ToolPanelize.py:889 appTools/ToolPunchGerber.py:993
#: appTools/ToolQRCode.py:905 appTools/ToolRulesCheck.py:1618
#: appTools/ToolSolderPaste.py:1557 appTools/ToolSub.py:752
#: appTools/ToolTransform.py:920
msgid "Reset Tool"
msgstr "Reset Tool"

#: appTools/ToolAlignObjects.py:501 appTools/ToolCalculators.py:375
#: appTools/ToolCalibration.py:1381 appTools/ToolCopperThieving.py:1580
#: appTools/ToolCorners.py:447 appTools/ToolCutOut.py:2395
#: appTools/ToolDblSided.py:950 appTools/ToolDrilling.py:2652
#: appTools/ToolEtchCompensation.py:461 appTools/ToolExtractDrills.py:705
#: appTools/ToolFiducials.py:935 appTools/ToolFilm.py:1386
#: appTools/ToolInvertGerber.py:289 appTools/ToolIsolation.py:3432
#: appTools/ToolMilling.py:2327 appTools/ToolNCC.py:4273
#: appTools/ToolOptimal.py:596 appTools/ToolPaint.py:3196
#: appTools/ToolPanelize.py:892 appTools/ToolPunchGerber.py:996
#: appTools/ToolQRCode.py:908 appTools/ToolRulesCheck.py:1621
#: appTools/ToolSolderPaste.py:1560 appTools/ToolSub.py:755
#: appTools/ToolTransform.py:923
msgid "Will reset the tool parameters."
msgstr "Will reset the tool parameters."

#: appTools/ToolCalculators.py:77
msgid "Calc. Tool"
msgstr "Calc. Tool"

#: appTools/ToolCalculators.py:151
msgid "Calculators"
msgstr "Calculators"

#: appTools/ToolCalculators.py:153
msgid "Units Calculator"
msgstr "Units Calculator"

#: appTools/ToolCalculators.py:196
msgid "Here you enter the value to be converted from INCH to MM"
msgstr "Here you enter the value to be converted from INCH to MM"

#: appTools/ToolCalculators.py:201
msgid "Here you enter the value to be converted from MM to INCH"
msgstr "Here you enter the value to be converted from MM to INCH"

#: appTools/ToolCalculators.py:237
msgid ""
"This is the angle of the tip of the tool.\n"
"It is specified by manufacturer."
msgstr ""
"This is the angle of the tip of the tool.\n"
"It is specified by manufacturer."

#: appTools/ToolCalculators.py:246
msgid ""
"This is the depth to cut into the material.\n"
"In the CNCJob is the CutZ parameter."
msgstr ""
"This is the depth to cut into the material.\n"
"In the CNCJob is the CutZ parameter."

#: appTools/ToolCalculators.py:254
msgid ""
"This is the tool diameter to be entered into\n"
"FlatCAM Gerber section.\n"
"In the CNCJob section it is called >Tool dia<."
msgstr ""
"This is the tool diameter to be entered into\n"
"FlatCAM Gerber section.\n"
"In the CNCJob section it is called >Tool dia<."

#: appTools/ToolCalculators.py:265 appTools/ToolCalculators.py:361
msgid "Calculate"
msgstr "Calculate"

#: appTools/ToolCalculators.py:268
msgid ""
"Calculate either the Cut Z or the effective tool diameter,\n"
"  depending on which is desired and which is known. "
msgstr ""
"Calculate either the Cut Z or the effective tool diameter,\n"
"  depending on which is desired and which is known. "

#: appTools/ToolCalculators.py:331
msgid "Current Value"
msgstr "Current Value"

#: appTools/ToolCalculators.py:338
msgid ""
"This is the current intensity value\n"
"to be set on the Power Supply. In Amps."
msgstr ""
"This is the current intensity value\n"
"to be set on the Power Supply. In Amps."

#: appTools/ToolCalculators.py:342
msgid "Time"
msgstr "Time"

#: appTools/ToolCalculators.py:349
msgid ""
"This is the calculated time required for the procedure.\n"
"In minutes."
msgstr ""
"This is the calculated time required for the procedure.\n"
"In minutes."

#: appTools/ToolCalculators.py:364
msgid ""
"Calculate the current intensity value and the procedure time,\n"
"depending on the parameters above"
msgstr ""
"Calculate the current intensity value and the procedure time,\n"
"depending on the parameters above"

#: appTools/ToolCalibration.py:156
msgid "Tool initialized"
msgstr "Tool initialized"

#: appTools/ToolCalibration.py:194
msgid "There is no source FlatCAM object selected..."
msgstr "There is no source FlatCAM object selected..."

#: appTools/ToolCalibration.py:215
msgid "Get First calibration point. Bottom Left..."
msgstr "Get First calibration point. Bottom Left..."

#: appTools/ToolCalibration.py:282
msgid "Get Second calibration point. Bottom Right (Top Left)..."
msgstr "Get Second calibration point. Bottom Right (Top Left)..."

#: appTools/ToolCalibration.py:286
msgid "Get Third calibration point. Top Left (Bottom Right)..."
msgstr "Get Third calibration point. Top Left (Bottom Right)..."

#: appTools/ToolCalibration.py:290
msgid "Get Forth calibration point. Top Right..."
msgstr "Get Forth calibration point. Top Right..."

#: appTools/ToolCalibration.py:294
msgid "Done. All four points have been acquired."
msgstr "Done. All four points have been acquired."

#: appTools/ToolCalibration.py:325
msgid "Verification GCode for FlatCAM Calibration Tool"
msgstr "Verification GCode for FlatCAM Calibration Tool"

#: appTools/ToolCalibration.py:337 appTools/ToolCalibration.py:423
msgid "Gcode Viewer"
msgstr "Gcode Viewer"

#: appTools/ToolCalibration.py:353
msgid "Cancelled. Four points are needed for GCode generation."
msgstr "Cancelled. Four points are needed for GCode generation."

#: appTools/ToolCalibration.py:603 appTools/ToolCalibration.py:699
msgid "There is no FlatCAM object selected..."
msgstr "There is no FlatCAM object selected..."

#: appTools/ToolCalibration.py:764
msgid "Parameters used when creating the GCode in this tool."
msgstr "Parameters used when creating the GCode in this tool."

#: appTools/ToolCalibration.py:868
msgid "STEP 1: Acquire Calibration Points"
msgstr "STEP 1: Acquire Calibration Points"

#: appTools/ToolCalibration.py:870
msgid ""
"Pick four points by clicking on canvas.\n"
"Those four points should be in the four\n"
"(as much as possible) corners of the object."
msgstr ""
"Pick four points by clicking on canvas.\n"
"Those four points should be in the four\n"
"(as much as possible) corners of the object."

#: appTools/ToolCalibration.py:888 appTools/ToolImage.py:196
#: appTools/ToolPanelize.py:676 appTools/ToolProperties.py:180
msgid "Object Type"
msgstr "Object Type"

#: appTools/ToolCalibration.py:905
msgid "Source object selection"
msgstr "Source object selection"

#: appTools/ToolCalibration.py:907
msgid "FlatCAM Object to be used as a source for reference points."
msgstr "FlatCAM Object to be used as a source for reference points."

#: appTools/ToolCalibration.py:913
msgid "Calibration Points"
msgstr "Calibration Points"

#: appTools/ToolCalibration.py:915
msgid ""
"Contain the expected calibration points and the\n"
"ones measured."
msgstr ""
"Contain the expected calibration points and the\n"
"ones measured."

#: appTools/ToolCalibration.py:930 appTools/ToolSub.py:652
#: appTools/ToolSub.py:707
msgid "Target"
msgstr "Target"

#: appTools/ToolCalibration.py:931
msgid "Found Delta"
msgstr "Found Delta"

#: appTools/ToolCalibration.py:943
msgid "Bot Left X"
msgstr "Bot Left X"

#: appTools/ToolCalibration.py:952
msgid "Bot Left Y"
msgstr "Bot Left Y"

#: appTools/ToolCalibration.py:970
msgid "Bot Right X"
msgstr "Bot Right X"

#: appTools/ToolCalibration.py:980
msgid "Bot Right Y"
msgstr "Bot Right Y"

#: appTools/ToolCalibration.py:995
msgid "Top Left X"
msgstr "Top Left X"

#: appTools/ToolCalibration.py:1004
msgid "Top Left Y"
msgstr "Top Left Y"

#: appTools/ToolCalibration.py:1019
msgid "Top Right X"
msgstr "Top Right X"

#: appTools/ToolCalibration.py:1029
msgid "Top Right Y"
msgstr "Top Right Y"

#: appTools/ToolCalibration.py:1062
msgid "Get Points"
msgstr "Get Points"

#: appTools/ToolCalibration.py:1064
msgid ""
"Pick four points by clicking on canvas if the source choice\n"
"is 'free' or inside the object geometry if the source is 'object'.\n"
"Those four points should be in the four squares of\n"
"the object."
msgstr ""
"Pick four points by clicking on canvas if the source choice\n"
"is 'free' or inside the object geometry if the source is 'object'.\n"
"Those four points should be in the four squares of\n"
"the object."

#: appTools/ToolCalibration.py:1085
msgid "STEP 2: Verification GCode"
msgstr "STEP 2: Verification GCode"

#: appTools/ToolCalibration.py:1087 appTools/ToolCalibration.py:1100
msgid ""
"Generate GCode file to locate and align the PCB by using\n"
"the four points acquired above.\n"
"The points sequence is:\n"
"- first point -> set the origin\n"
"- second point -> alignment point. Can be: top-left or bottom-right.\n"
"- third point -> check point. Can be: top-left or bottom-right.\n"
"- forth point -> final verification point. Just for evaluation."
msgstr ""
"Generate GCode file to locate and align the PCB by using\n"
"the four points acquired above.\n"
"The points sequence is:\n"
"- first point -> set the origin\n"
"- second point -> alignment point. Can be: top-left or bottom-right.\n"
"- third point -> check point. Can be: top-left or bottom-right.\n"
"- forth point -> final verification point. Just for evaluation."

#: appTools/ToolCalibration.py:1098 appTools/ToolSolderPaste.py:1420
msgid "Generate GCode"
msgstr "Generate GCode"

#: appTools/ToolCalibration.py:1124
msgid "STEP 3: Adjustments"
msgstr "STEP 3: Adjustments"

#: appTools/ToolCalibration.py:1126 appTools/ToolCalibration.py:1135
msgid ""
"Calculate Scale and Skew factors based on the differences (delta)\n"
"found when checking the PCB pattern. The differences must be filled\n"
"in the fields Found (Delta)."
msgstr ""
"Calculate Scale and Skew factors based on the differences (delta)\n"
"found when checking the PCB pattern. The differences must be filled\n"
"in the fields Found (Delta)."

#: appTools/ToolCalibration.py:1133
msgid "Calculate Factors"
msgstr "Calculate Factors"

#: appTools/ToolCalibration.py:1155
msgid "STEP 4: Adjusted GCode"
msgstr "STEP 4: Adjusted GCode"

#: appTools/ToolCalibration.py:1157
msgid ""
"Generate verification GCode file adjusted with\n"
"the factors above."
msgstr ""
"Generate verification GCode file adjusted with\n"
"the factors above."

#: appTools/ToolCalibration.py:1162
msgid "Scale Factor X:"
msgstr "Scale Factor X:"

#: appTools/ToolCalibration.py:1164
msgid "Factor for Scale action over X axis."
msgstr "Factor for Scale action over X axis."

#: appTools/ToolCalibration.py:1174
msgid "Scale Factor Y:"
msgstr "Scale Factor Y:"

#: appTools/ToolCalibration.py:1176
msgid "Factor for Scale action over Y axis."
msgstr "Factor for Scale action over Y axis."

#: appTools/ToolCalibration.py:1186
msgid "Apply Scale Factors"
msgstr "Apply Scale Factors"

#: appTools/ToolCalibration.py:1188
msgid "Apply Scale factors on the calibration points."
msgstr "Apply Scale factors on the calibration points."

#: appTools/ToolCalibration.py:1198
msgid "Skew Angle X:"
msgstr "Skew Angle X:"

#: appTools/ToolCalibration.py:1211
msgid "Skew Angle Y:"
msgstr "Skew Angle Y:"

#: appTools/ToolCalibration.py:1224
msgid "Apply Skew Factors"
msgstr "Apply Skew Factors"

#: appTools/ToolCalibration.py:1226
msgid "Apply Skew factors on the calibration points."
msgstr "Apply Skew factors on the calibration points."

#: appTools/ToolCalibration.py:1295
msgid "Generate Adjusted GCode"
msgstr "Generate Adjusted GCode"

#: appTools/ToolCalibration.py:1297
msgid ""
"Generate verification GCode file adjusted with\n"
"the factors set above.\n"
"The GCode parameters can be readjusted\n"
"before clicking this button."
msgstr ""
"Generate verification GCode file adjusted with\n"
"the factors set above.\n"
"The GCode parameters can be readjusted\n"
"before clicking this button."

#: appTools/ToolCalibration.py:1318
msgid "STEP 5: Calibrate FlatCAM Objects"
msgstr "STEP 5: Calibrate FlatCAM Objects"

#: appTools/ToolCalibration.py:1320
msgid ""
"Adjust the FlatCAM objects\n"
"with the factors determined and verified above."
msgstr ""
"Adjust the FlatCAM objects\n"
"with the factors determined and verified above."

#: appTools/ToolCalibration.py:1332
msgid "Adjusted object type"
msgstr "Adjusted object type"

#: appTools/ToolCalibration.py:1333
msgid "Type of the FlatCAM Object to be adjusted."
msgstr "Type of the FlatCAM Object to be adjusted."

#: appTools/ToolCalibration.py:1346
msgid "Adjusted object selection"
msgstr "Adjusted object selection"

#: appTools/ToolCalibration.py:1348
msgid "The FlatCAM Object to be adjusted."
msgstr "The FlatCAM Object to be adjusted."

#: appTools/ToolCalibration.py:1355
msgid "Calibrate"
msgstr "Calibrate"

#: appTools/ToolCalibration.py:1357
msgid ""
"Adjust (scale and/or skew) the objects\n"
"with the factors determined above."
msgstr ""
"Adjust (scale and/or skew) the objects\n"
"with the factors determined above."

#: appTools/ToolCopperThieving.py:184 appTools/ToolCopperThieving.py:209
msgid "Lines Grid works only for 'itself' reference ..."
msgstr "Lines Grid works only for 'itself' reference ..."

#: appTools/ToolCopperThieving.py:195
msgid "Solid fill selected."
msgstr "Solid fill selected."

#: appTools/ToolCopperThieving.py:200
msgid "Dots grid fill selected."
msgstr "Dots grid fill selected."

#: appTools/ToolCopperThieving.py:205
msgid "Squares grid fill selected."
msgstr "Squares grid fill selected."

#: appTools/ToolCopperThieving.py:226 appTools/ToolCopperThieving.py:308
#: appTools/ToolCopperThieving.py:910 appTools/ToolCorners.py:120
#: appTools/ToolDblSided.py:304 appTools/ToolExtractDrills.py:141
#: appTools/ToolFiducials.py:187 appTools/ToolFiducials.py:464
#: appTools/ToolOptimal.py:138 appTools/ToolPunchGerber.py:188
#: appTools/ToolQRCode.py:158
msgid "There is no Gerber object loaded ..."
msgstr "There is no Gerber object loaded ..."

#: appTools/ToolCopperThieving.py:239 appTools/ToolCopperThieving.py:838
msgid "Append geometry"
msgstr "Append geometry"

#: appTools/ToolCopperThieving.py:283 appTools/ToolCopperThieving.py:871
#: appTools/ToolCopperThieving.py:1016
msgid "Append source file"
msgstr "Append source file"

#: appTools/ToolCopperThieving.py:291 appTools/ToolCopperThieving.py:879
msgid "Copper Thieving Tool done."
msgstr "Copper Thieving Tool done."

#: appTools/ToolCopperThieving.py:318 appTools/ToolCopperThieving.py:351
#: appTools/ToolCutOut.py:542 appTools/ToolCutOut.py:915
#: appTools/ToolDrilling.py:726 appTools/ToolDrilling.py:1582
#: appTools/ToolEtchCompensation.py:152 appTools/ToolInvertGerber.py:99
#: appTools/ToolIsolation.py:899 appTools/ToolIsolation.py:1310
#: appTools/ToolIsolation.py:1337 appTools/ToolMilling.py:424
#: appTools/ToolMilling.py:639 appTools/ToolMilling.py:1322
#: appTools/ToolNCC.py:829 appTools/ToolNCC.py:1261 appTools/ToolNCC.py:1307
#: appTools/ToolNCC.py:1340 appTools/ToolPaint.py:1085
#: appTools/ToolPanelize.py:191 appTools/ToolPanelize.py:205
#: appTools/ToolSub.py:157 appTools/ToolSub.py:170 appTools/ToolSub.py:359
#: appTools/ToolSub.py:372 tclCommands/TclCommandCopperClear.py:97
#: tclCommands/TclCommandPaint.py:99
msgid "Could not retrieve object"
msgstr "Could not retrieve object"

#: appTools/ToolCopperThieving.py:379
msgid "Click the end point of the filling area."
msgstr "Click the end point of the filling area."

#: appTools/ToolCopperThieving.py:507 appTools/ToolCopperThieving.py:511
#: appTools/ToolCopperThieving.py:572
msgid "Thieving"
msgstr "Thieving"

#: appTools/ToolCopperThieving.py:518
msgid "Copper Thieving Tool started. Reading parameters."
msgstr "Copper Thieving Tool started. Reading parameters."

#: appTools/ToolCopperThieving.py:543
msgid "Copper Thieving Tool. Preparing isolation polygons."
msgstr "Copper Thieving Tool. Preparing isolation polygons."

#: appTools/ToolCopperThieving.py:588
msgid "Copper Thieving Tool. Preparing areas to fill with copper."
msgstr "Copper Thieving Tool. Preparing areas to fill with copper."

#: appTools/ToolCopperThieving.py:599 appTools/ToolFilm.py:631
#: appTools/ToolFilm.py:879 appTools/ToolIsolation.py:906
#: appTools/ToolNCC.py:836 appTools/ToolOptimal.py:145
#: appTools/ToolPanelize.py:612 appTools/ToolRulesCheck.py:626
msgid "Working..."
msgstr "Working..."

#: appTools/ToolCopperThieving.py:626
msgid "Geometry not supported for bounding box"
msgstr "Geometry not supported for bounding box"

#: appTools/ToolCopperThieving.py:632 appTools/ToolNCC.py:1631
#: appTools/ToolNCC.py:1686 appTools/ToolNCC.py:2626 appTools/ToolPaint.py:2456
msgid "No object available."
msgstr "No object available."

#: appTools/ToolCopperThieving.py:669 appTools/ToolNCC.py:1656
#: appTools/ToolNCC.py:1709 appTools/ToolNCC.py:2668
msgid "The reference object type is not supported."
msgstr "The reference object type is not supported."

#: appTools/ToolCopperThieving.py:674
msgid "Copper Thieving Tool. Appending new geometry and buffering."
msgstr "Copper Thieving Tool. Appending new geometry and buffering."

#: appTools/ToolCopperThieving.py:690
msgid "Create geometry"
msgstr "Create geometry"

#: appTools/ToolCopperThieving.py:890 appTools/ToolCopperThieving.py:894
msgid "P-Plating Mask"
msgstr "P-Plating Mask"

#: appTools/ToolCopperThieving.py:916
msgid "Append PP-M geometry"
msgstr "Append PP-M geometry"

#: appTools/ToolCopperThieving.py:1034
msgid "Generating Pattern Plating Mask done."
msgstr "Generating Pattern Plating Mask done."

#: appTools/ToolCopperThieving.py:1106
msgid "Copper Thieving Tool exit."
msgstr "Copper Thieving Tool exit."

#: appTools/ToolCopperThieving.py:1165 appTools/ToolFiducials.py:875
msgid "Gerber Object to which will be added a copper thieving."
msgstr "Gerber Object to which will be added a copper thieving."

#: appTools/ToolCopperThieving.py:1191
msgid ""
"This set the distance between the copper thieving components\n"
"(the polygon fill may be split in multiple polygons)\n"
"and the copper traces in the Gerber file."
msgstr ""
"This set the distance between the copper thieving components\n"
"(the polygon fill may be split in multiple polygons)\n"
"and the copper traces in the Gerber file."

#: appTools/ToolCopperThieving.py:1224
msgid ""
"- 'Itself' - the copper thieving extent is based on the object extent.\n"
"- 'Area Selection' - left mouse click to start selection of the area to be "
"filled.\n"
"- 'Reference Object' - will do copper thieving within the area specified by "
"another object."
msgstr ""
"- 'Itself' - the copper thieving extent is based on the object extent.\n"
"- 'Area Selection' - left mouse click to start selection of the area to be "
"filled.\n"
"- 'Reference Object' - will do copper thieving within the area specified by "
"another object."

#: appTools/ToolCopperThieving.py:1231 appTools/ToolIsolation.py:3337
#: appTools/ToolNCC.py:4209 appTools/ToolPaint.py:3136
msgid "Ref. Type"
msgstr "Ref. Type"

#: appTools/ToolCopperThieving.py:1233
msgid ""
"The type of FlatCAM object to be used as copper thieving reference.\n"
"It can be Gerber, Excellon or Geometry."
msgstr ""
"The type of FlatCAM object to be used as copper thieving reference.\n"
"It can be Gerber, Excellon or Geometry."

#: appTools/ToolCopperThieving.py:1242 appTools/ToolIsolation.py:3348
#: appTools/ToolNCC.py:4219 appTools/ToolPaint.py:3146
msgid "Ref. Object"
msgstr "Ref. Object"

#: appTools/ToolCopperThieving.py:1244 appTools/ToolIsolation.py:3350
#: appTools/ToolNCC.py:4221 appTools/ToolPaint.py:3148
msgid "The FlatCAM object to be used as non copper clearing reference."
msgstr "The FlatCAM object to be used as non copper clearing reference."

#: appTools/ToolCopperThieving.py:1420
msgid "Insert Copper thieving"
msgstr "Insert Copper thieving"

#: appTools/ToolCopperThieving.py:1422
msgid ""
"Will add a polygon (may be split in multiple parts)\n"
"that will surround the actual Gerber traces at a certain distance."
msgstr ""
"Will add a polygon (may be split in multiple parts)\n"
"that will surround the actual Gerber traces at a certain distance."

#: appTools/ToolCopperThieving.py:1481
msgid "Insert Robber Bar"
msgstr "Insert Robber Bar"

#: appTools/ToolCopperThieving.py:1483
msgid ""
"Will add a polygon with a defined thickness\n"
"that will surround the actual Gerber object\n"
"at a certain distance.\n"
"Required when doing holes pattern plating."
msgstr ""
"Will add a polygon with a defined thickness\n"
"that will surround the actual Gerber object\n"
"at a certain distance.\n"
"Required when doing holes pattern plating."

#: appTools/ToolCopperThieving.py:1507
msgid "Select Soldermask object"
msgstr "Select Soldermask object"

#: appTools/ToolCopperThieving.py:1509
msgid ""
"Gerber Object with the soldermask.\n"
"It will be used as a base for\n"
"the pattern plating mask."
msgstr ""
"Gerber Object with the soldermask.\n"
"It will be used as a base for\n"
"the pattern plating mask."

#: appTools/ToolCopperThieving.py:1538
msgid "Plated area"
msgstr "Plated area"

#: appTools/ToolCopperThieving.py:1540
msgid ""
"The area to be plated by pattern plating.\n"
"Basically is made from the openings in the plating mask.\n"
"\n"
"<<WARNING>> - the calculated area is actually a bit larger\n"
"due of the fact that the soldermask openings are by design\n"
"a bit larger than the copper pads, and this area is\n"
"calculated from the soldermask openings."
msgstr ""
"The area to be plated by pattern plating.\n"
"Basically is made from the openings in the plating mask.\n"
"\n"
"<<WARNING>> - the calculated area is actually a bit larger\n"
"due of the fact that the soldermask openings are by design\n"
"a bit larger than the copper pads, and this area is\n"
"calculated from the soldermask openings."

#: appTools/ToolCopperThieving.py:1551
msgid "mm"
msgstr "mm"

#: appTools/ToolCopperThieving.py:1553
msgid "in"
msgstr "in"

#: appTools/ToolCopperThieving.py:1560
msgid "Generate pattern plating mask"
msgstr "Generate pattern plating mask"

#: appTools/ToolCopperThieving.py:1562
msgid ""
"Will add to the soldermask gerber geometry\n"
"the geometries of the copper thieving and/or\n"
"the robber bar if those were generated."
msgstr ""
"Will add to the soldermask gerber geometry\n"
"the geometries of the copper thieving and/or\n"
"the robber bar if those were generated."

#: appTools/ToolCorners.py:87
msgid "Corners Tool"
msgstr "Corners Tool"

#: appTools/ToolCorners.py:157
msgid "Please select at least a location"
msgstr "Please select at least a location"

#: appTools/ToolCorners.py:292
msgid "Corners Tool exit."
msgstr "Corners Tool exit."

#: appTools/ToolCorners.py:319
msgid "The Gerber object to which will be added corner markers."
msgstr "The Gerber object to which will be added corner markers."

#: appTools/ToolCorners.py:335
msgid "Locations"
msgstr "Locations"

#: appTools/ToolCorners.py:337
msgid "Locations where to place corner markers."
msgstr "Locations where to place corner markers."

#: appTools/ToolCorners.py:354 appTools/ToolFiducials.py:706
msgid "Top Right"
msgstr "Top Right"

#: appTools/ToolCorners.py:363
msgid "Toggle ALL"
msgstr "Toggle ALL"

#: appTools/ToolCorners.py:429
msgid "Add Marker"
msgstr "Add Marker"

#: appTools/ToolCorners.py:431
msgid "Will add corner markers to the selected Gerber file."
msgstr "Will add corner markers to the selected Gerber file."

#: appTools/ToolCutOut.py:280 appTools/ToolIsolation.py:785
#: appTools/ToolIsolation.py:1014 appTools/ToolIsolation.py:1150
#: appTools/ToolNCC.py:458 appTools/ToolNCC.py:945 appTools/ToolNCC.py:1083
#: appTools/ToolPaint.py:395 appTools/ToolPaint.py:685
#: appTools/ToolPaint.py:822 appTools/ToolSolderPaste.py:131
#: appTools/ToolSolderPaste.py:464 app_Main.py:4490
msgid "Please enter a tool diameter with non-zero value, in Float format."
msgstr "Please enter a tool diameter with non-zero value, in Float format."

#: appTools/ToolCutOut.py:356 appTools/ToolIsolation.py:1095
#: appTools/ToolNCC.py:1028 appTools/ToolPaint.py:766
#, fuzzy
#| msgid "Tools in Tools Database edited but not saved."
msgid "Tool not in Tools Database. Adding a default tool."
msgstr "Tools in Tools Database edited but not saved."

#: appTools/ToolCutOut.py:363 appTools/ToolDrilling.py:955
#: appTools/ToolIsolation.py:1102 appTools/ToolNCC.py:1035
#: appTools/ToolPaint.py:774
msgid ""
"Cancelled.\n"
"Multiple tools for one tool diameter found in Tools Database."
msgstr ""

#: appTools/ToolCutOut.py:387
#, fuzzy
#| msgid "Add Tool from Tools DB"
msgid "Updated tool from Tools Database."
msgstr "Add Tool from Tools DB"

#: appTools/ToolCutOut.py:455
#, fuzzy
#| msgid "Default Values"
msgid "Default tool added."
msgstr "Default Values"

#: appTools/ToolCutOut.py:464 appTools/ToolIsolation.py:2539
#: appTools/ToolNCC.py:3601 appTools/ToolPaint.py:2619
msgid "Selected tool can't be used here. Pick another."
msgstr ""

#: appTools/ToolCutOut.py:487
#, fuzzy
#| msgid "Tool copied from Tools DB."
msgid "Tool updated from Tools Database."
msgstr "Tool copied from Tools DB."

#: appTools/ToolCutOut.py:547
msgid ""
"There is no object selected for Cutout.\n"
"Select one and try again."
msgstr ""
"There is no object selected for Cutout.\n"
"Select one and try again."

#: appTools/ToolCutOut.py:553 appTools/ToolCutOut.py:924
#: appTools/ToolCutOut.py:1298 appTools/ToolCutOut.py:1429
#: tclCommands/TclCommandGeoCutout.py:184
msgid "Tool Diameter is zero value. Change it to a positive real number."
msgstr "Tool Diameter is zero value. Change it to a positive real number."

#: appTools/ToolCutOut.py:566 appTools/ToolCutOut.py:938
msgid "Number of gaps value is missing. Add it and retry."
msgstr "Number of gaps value is missing. Add it and retry."

#: appTools/ToolCutOut.py:571 appTools/ToolCutOut.py:942
msgid ""
"Gaps value can be only one of: 'None', 'lr', 'tb', '2lr', '2tb', 4 or 8. "
"Fill in a correct value and retry. "
msgstr ""
"Gaps value can be only one of: 'None', 'lr', 'tb', '2lr', '2tb', 4 or 8. "
"Fill in a correct value and retry. "

#: appTools/ToolCutOut.py:889 appTools/ToolCutOut.py:1258
#: appTools/ToolCutOut.py:1613
#, fuzzy
#| msgid "Open GCode file failed."
msgid "Mouse bites failed."
msgstr "Open GCode file failed."

#: appTools/ToolCutOut.py:897
msgid "Any form CutOut operation finished."
msgstr "Any form CutOut operation finished."

#: appTools/ToolCutOut.py:919 appTools/ToolDrilling.py:1586
#: appTools/ToolEtchCompensation.py:158 appTools/ToolInvertGerber.py:105
#: appTools/ToolIsolation.py:903 appTools/ToolIsolation.py:1314
#: appTools/ToolIsolation.py:1341 appTools/ToolMilling.py:1326
#: appTools/ToolNCC.py:833 appTools/ToolNCC.py:1265 appTools/ToolPaint.py:1002
#: appTools/ToolPanelize.py:196 tclCommands/TclCommandBbox.py:71
#: tclCommands/TclCommandNregions.py:71
msgid "Object not found"
msgstr "Object not found"

#: appTools/ToolCutOut.py:1112 appTools/ToolCutOut.py:1185
msgid "Rectangular cutout with negative margin is not possible."
msgstr "Rectangular cutout with negative margin is not possible."

#: appTools/ToolCutOut.py:1266
#, fuzzy
#| msgid "Any form CutOut operation finished."
msgid "Rectangular CutOut operation finished."
msgstr "Any form CutOut operation finished."

#: appTools/ToolCutOut.py:1282 appTools/ToolCutOut.py:1314
msgid "Could not retrieve Geometry object"
msgstr "Could not retrieve Geometry object"

#: appTools/ToolCutOut.py:1287 appTools/ToolCutOut.py:1342
msgid "Geometry object for manual cutout not found"
msgstr "Geometry object for manual cutout not found"

#: appTools/ToolCutOut.py:1290
msgid ""
"Click on the selected geometry object perimeter to create a bridge gap ..."
msgstr ""
"Click on the selected geometry object perimeter to create a bridge gap ..."

#: appTools/ToolCutOut.py:1378
#, fuzzy
#| msgid "Generate the Geometry object."
msgid "No tool in the Geometry object."
msgstr "Generate the Geometry object."

#: appTools/ToolCutOut.py:1399
#, fuzzy
#| msgid ""
#| "Zone added. Click to start adding next zone or right click to finish."
msgid ""
"Added manual Bridge Gap. Left click to add another or right click to finish."
msgstr "Zone added. Click to start adding next zone or right click to finish."

#: appTools/ToolCutOut.py:1411
msgid "Could not retrieve Gerber object"
msgstr "Could not retrieve Gerber object"

#: appTools/ToolCutOut.py:1416
msgid ""
"There is no Gerber object selected for Cutout.\n"
"Select one and try again."
msgstr ""
"There is no Gerber object selected for Cutout.\n"
"Select one and try again."

#: appTools/ToolCutOut.py:1422
msgid ""
"The selected object has to be of Gerber type.\n"
"Select a Gerber file and try again."
msgstr ""
"The selected object has to be of Gerber type.\n"
"Select a Gerber file and try again."

#: appTools/ToolCutOut.py:1457
msgid "Geometry not supported for cutout"
msgstr "Geometry not supported for cutout"

#: appTools/ToolCutOut.py:1529
msgid "Making manual bridge gap..."
msgstr "Making manual bridge gap..."

#: appTools/ToolCutOut.py:1617
msgid "Finished manual adding of gaps."
msgstr ""

#: appTools/ToolCutOut.py:1959
msgid "Cutout PCB"
msgstr "Cutout PCB"

#: appTools/ToolCutOut.py:1985 appTools/ToolDblSided.py:513
#: appTools/ToolPanelize.py:652
msgid "Source Object"
msgstr "Source Object"

#: appTools/ToolCutOut.py:1986
msgid "Object to be cutout"
msgstr "Object to be cutout"

#: appTools/ToolCutOut.py:1991
msgid "Kind"
msgstr "Kind"

#: appTools/ToolCutOut.py:2013 appTools/ToolDblSided.py:521
msgid ""
"Specify the type of object to be cutout.\n"
"It can be of type: Gerber or Geometry.\n"
"What is selected here will dictate the kind\n"
"of objects that will populate the 'Object' combobox."
msgstr ""
"Specify the type of object to be cutout.\n"
"It can be of type: Gerber or Geometry.\n"
"What is selected here will dictate the kind\n"
"of objects that will populate the 'Object' combobox."

#: appTools/ToolCutOut.py:2072 appTools/ToolIsolation.py:3087
#: appTools/ToolNCC.py:3891 appTools/ToolPaint.py:2900
msgid ""
"Add a new tool to the Tool Table\n"
"with the diameter specified above.\n"
"This is done by a background search\n"
"in the Tools Database. If nothing is found\n"
"in the Tools DB then a default tool is added."
msgstr ""

#: appTools/ToolCutOut.py:2098
msgid "Tool Parameters"
msgstr "Tool Parameters"

#: appTools/ToolCutOut.py:2247
#, fuzzy
#| msgid "Auto"
msgid "Automatic"
msgstr "Auto"

#: appTools/ToolCutOut.py:2247 appTools/ToolCutOut.py:2322
#, fuzzy
#| msgid "B. Manual Bridge Gaps"
msgid "Bridge Gaps"
msgstr "B. Manual Bridge Gaps"

#: appTools/ToolCutOut.py:2249
msgid "This section handle creation of automatic bridge gaps."
msgstr "This section handle creation of automatic bridge gaps."

#: appTools/ToolCutOut.py:2288
msgid ""
"Cutout the selected object.\n"
"The cutout shape can be of any shape.\n"
"Useful when the PCB has a non-rectangular shape."
msgstr ""
"Cutout the selected object.\n"
"The cutout shape can be of any shape.\n"
"Useful when the PCB has a non-rectangular shape."

#: appTools/ToolCutOut.py:2303
msgid ""
"Cutout the selected object.\n"
"The resulting cutout shape is\n"
"always a rectangle shape and it will be\n"
"the bounding box of the Object."
msgstr ""
"Cutout the selected object.\n"
"The resulting cutout shape is\n"
"always a rectangle shape and it will be\n"
"the bounding box of the Object."

#: appTools/ToolCutOut.py:2324
msgid ""
"This section handle creation of manual bridge gaps.\n"
"This is done by mouse clicking on the perimeter of the\n"
"Geometry object that is used as a cutout object. "
msgstr ""
"This section handle creation of manual bridge gaps.\n"
"This is done by mouse clicking on the perimeter of the\n"
"Geometry object that is used as a cutout object. "

#: appTools/ToolCutOut.py:2340
msgid "Generate Manual Geometry"
msgstr "Generate Manual Geometry"

#: appTools/ToolCutOut.py:2343
msgid ""
"If the object to be cutout is a Gerber\n"
"first create a Geometry that surrounds it,\n"
"to be used as the cutout, if one doesn't exist yet.\n"
"Select the source Gerber file in the top object combobox."
msgstr ""
"If the object to be cutout is a Gerber\n"
"first create a Geometry that surrounds it,\n"
"to be used as the cutout, if one doesn't exist yet.\n"
"Select the source Gerber file in the top object combobox."

#: appTools/ToolCutOut.py:2363
#, fuzzy
#| msgid "Subtract Geometry"
msgid "Manual cutout Geometry"
msgstr "Subtract Geometry"

#: appTools/ToolCutOut.py:2365
msgid "Geometry object used to create the manual cutout."
msgstr "Geometry object used to create the manual cutout."

#: appTools/ToolCutOut.py:2372
msgid "Manual Add Bridge Gaps"
msgstr "Manual Add Bridge Gaps"

#: appTools/ToolCutOut.py:2375
msgid ""
"Use the left mouse button (LMB) click\n"
"to create a bridge gap to separate the PCB from\n"
"the surrounding material.\n"
"The LMB click has to be done on the perimeter of\n"
"the Geometry object used as a cutout geometry."
msgstr ""
"Use the left mouse button (LMB) click\n"
"to create a bridge gap to separate the PCB from\n"
"the surrounding material.\n"
"The LMB click has to be done on the perimeter of\n"
"the Geometry object used as a cutout geometry."

#: appTools/ToolDblSided.py:107
msgid "2-Sided Tool"
msgstr "2-Sided Tool"

#: appTools/ToolDblSided.py:160
msgid ""
"'Point' reference is selected and 'Point' coordinates are missing. Add them "
"and retry."
msgstr ""
"'Point' reference is selected and 'Point' coordinates are missing. Add them "
"and retry."

#: appTools/ToolDblSided.py:169
msgid "There is no Box reference object loaded. Load one and retry."
msgstr "There is no Box reference object loaded. Load one and retry."

#: appTools/ToolDblSided.py:181
msgid "No value or wrong format in Drill Dia entry. Add it and retry."
msgstr "No value or wrong format in Drill Dia entry. Add it and retry."

#: appTools/ToolDblSided.py:193
msgid "There are no Alignment Drill Coordinates to use. Add them and retry."
msgstr "There are no Alignment Drill Coordinates to use. Add them and retry."

#: appTools/ToolDblSided.py:213
msgid "Excellon object with alignment drills created..."
msgstr "Excellon object with alignment drills created..."

#: appTools/ToolDblSided.py:224 appTools/ToolPunchGerber.py:209
msgid "There is no Excellon object loaded ..."
msgstr "There is no Excellon object loaded ..."

#: appTools/ToolDblSided.py:236
msgid "Click on canvas within the desired Excellon drill hole"
msgstr ""

#: appTools/ToolDblSided.py:280
#, fuzzy
#| msgid "Mirror Reference point"
msgid "Mirror reference point set."
msgstr "Mirror Reference point"

#: appTools/ToolDblSided.py:308
msgid "Only Gerber, Excellon and Geometry objects can be mirrored."
msgstr "Only Gerber, Excellon and Geometry objects can be mirrored."

#: appTools/ToolDblSided.py:320
msgid "There is no Box object loaded ..."
msgstr "There is no Box object loaded ..."

#: appTools/ToolDblSided.py:330
msgid ""
"There are no Point coordinates in the Point field. Add coords and try "
"again ..."
msgstr ""
"There are no Point coordinates in the Point field. Add coords and try "
"again ..."

#: appTools/ToolDblSided.py:337 camlib.py:2350
msgid "Object was mirrored"
msgstr "Object was mirrored"

#: appTools/ToolDblSided.py:403 app_Main.py:4629 app_Main.py:4784
msgid "Failed. No object(s) selected..."
msgstr "Failed. No object(s) selected..."

#: appTools/ToolDblSided.py:487
msgid "2-Sided PCB"
msgstr "2-Sided PCB"

#: appTools/ToolDblSided.py:514
msgid "Objects to be mirrored"
msgstr "Objects to be mirrored"

#: appTools/ToolDblSided.py:560
msgid "Bounds Values"
msgstr "Bounds Values"

#: appTools/ToolDblSided.py:562
msgid ""
"Select on canvas the object(s)\n"
"for which to calculate bounds values."
msgstr ""
"Select on canvas the object(s)\n"
"for which to calculate bounds values."

#: appTools/ToolDblSided.py:572
msgid "X min"
msgstr "X min"

#: appTools/ToolDblSided.py:574 appTools/ToolDblSided.py:588
msgid "Minimum location."
msgstr "Minimum location."

#: appTools/ToolDblSided.py:586
msgid "Y min"
msgstr "Y min"

#: appTools/ToolDblSided.py:600
msgid "X max"
msgstr "X max"

#: appTools/ToolDblSided.py:602 appTools/ToolDblSided.py:616
msgid "Maximum location."
msgstr "Maximum location."

#: appTools/ToolDblSided.py:614
msgid "Y max"
msgstr "Y max"

#: appTools/ToolDblSided.py:625
msgid "Center point coordinates"
msgstr "Center point coordinates"

#: appTools/ToolDblSided.py:627
msgid "Centroid"
msgstr "Centroid"

#: appTools/ToolDblSided.py:629
msgid ""
"The center point location for the rectangular\n"
"bounding shape. Centroid. Format is (x, y)."
msgstr ""
"The center point location for the rectangular\n"
"bounding shape. Centroid. Format is (x, y)."

#: appTools/ToolDblSided.py:638
msgid "Calculate Bounds Values"
msgstr "Calculate Bounds Values"

#: appTools/ToolDblSided.py:640
msgid ""
"Calculate the enveloping rectangular shape coordinates,\n"
"for the selection of objects.\n"
"The envelope shape is parallel with the X, Y axis."
msgstr ""
"Calculate the enveloping rectangular shape coordinates,\n"
"for the selection of objects.\n"
"The envelope shape is parallel with the X, Y axis."

#: appTools/ToolDblSided.py:667
msgid "Mirror Operation"
msgstr "Mirror Operation"

#: appTools/ToolDblSided.py:668
msgid "Parameters for the mirror operation"
msgstr "Parameters for the mirror operation"

#: appTools/ToolDblSided.py:690
#, fuzzy
#| msgid ""
#| "The coordinates used as reference for the mirror operation.\n"
#| "Can be:\n"
#| "- Point -> a set of coordinates (x,y) around which the object is "
#| "mirrored\n"
#| "- Box -> a set of coordinates (x, y) obtained from the center of the\n"
#| "bounding box of another object selected below"
msgid ""
"The coordinates used as reference for the mirror operation.\n"
"Can be:\n"
"- Point -> a set of coordinates (x,y) around which the object is mirrored\n"
"- Box -> a set of coordinates (x, y) obtained from the center of the\n"
"bounding box of another object selected below\n"
"- Hole Snap -> a point defined by the center of a drill hone in a Excellon "
"object"
msgstr ""
"The coordinates used as reference for the mirror operation.\n"
"Can be:\n"
"- Point -> a set of coordinates (x,y) around which the object is mirrored\n"
"- Box -> a set of coordinates (x, y) obtained from the center of the\n"
"bounding box of another object selected below"

#: appTools/ToolDblSided.py:710
msgid "Point coordinates"
msgstr "Point coordinates"

#: appTools/ToolDblSided.py:715
msgid ""
"Add the coordinates in format <b>(x, y)</b> through which the mirroring "
"axis\n"
" selected in 'MIRROR AXIS' pass.\n"
"The (x, y) coordinates are captured by pressing SHIFT key\n"
"and left mouse button click on canvas or you can enter the coordinates "
"manually."
msgstr ""
"Add the coordinates in format <b>(x, y)</b> through which the mirroring "
"axis\n"
" selected in 'MIRROR AXIS' pass.\n"
"The (x, y) coordinates are captured by pressing SHIFT key\n"
"and left mouse button click on canvas or you can enter the coordinates "
"manually."

#: appTools/ToolDblSided.py:733
msgid "Object that holds holes that can be picked as reference for mirroing."
msgstr ""

#: appTools/ToolDblSided.py:748
msgid "Pick hole"
msgstr ""

#: appTools/ToolDblSided.py:750
msgid ""
"Click inside a drill hole that belong to the selected Excellon object,\n"
"and the hole center coordinates will be copied to the Point field."
msgstr ""

#: appTools/ToolDblSided.py:766
msgid ""
"It can be of type: Gerber or Excellon or Geometry.\n"
"The coordinates of the center of the bounding box are used\n"
"as reference for mirror operation."
msgstr ""
"It can be of type: Gerber or Excellon or Geometry.\n"
"The coordinates of the center of the bounding box are used\n"
"as reference for mirror operation."

#: appTools/ToolDblSided.py:792
msgid "Mirror"
msgstr "Mirror"

#: appTools/ToolDblSided.py:794
msgid ""
"Mirrors (flips) the specified object around \n"
"the specified axis. Does not create a new \n"
"object, but modifies it."
msgstr ""
"Mirrors (flips) the specified object around \n"
"the specified axis. Does not create a new \n"
"object, but modifies it."

#: appTools/ToolDblSided.py:822
msgid "PCB Alignment"
msgstr "PCB Alignment"

#: appTools/ToolDblSided.py:824 appTools/ToolDblSided.py:932
msgid ""
"Creates an Excellon Object containing the\n"
"specified alignment holes and their mirror\n"
"images."
msgstr ""
"Creates an Excellon Object containing the\n"
"specified alignment holes and their mirror\n"
"images."

#: appTools/ToolDblSided.py:831
msgid "Drill Diameter"
msgstr "Drill Diameter"

#: appTools/ToolDblSided.py:866 appTools/ToolDblSided.py:873
msgid ""
"The reference point used to create the second alignment drill\n"
"from the first alignment drill, by doing mirror.\n"
"It can be modified in the Mirror Parameters -> Reference section"
msgstr ""
"The reference point used to create the second alignment drill\n"
"from the first alignment drill, by doing mirror.\n"
"It can be modified in the Mirror Parameters -> Reference section"

#: appTools/ToolDblSided.py:886
msgid "Alignment Drill Coordinates"
msgstr "Alignment Drill Coordinates"

#: appTools/ToolDblSided.py:888
msgid ""
"Alignment holes (x1, y1), (x2, y2), ... on one side of the mirror axis. For "
"each set of (x, y) coordinates\n"
"entered here, a pair of drills will be created:\n"
"\n"
"- one drill at the coordinates from the field\n"
"- one drill in mirror position over the axis selected above in the 'Align "
"Axis'."
msgstr ""
"Alignment holes (x1, y1), (x2, y2), ... on one side of the mirror axis. For "
"each set of (x, y) coordinates\n"
"entered here, a pair of drills will be created:\n"
"\n"
"- one drill at the coordinates from the field\n"
"- one drill in mirror position over the axis selected above in the 'Align "
"Axis'."

#: appTools/ToolDblSided.py:896
msgid "Drill coordinates"
msgstr "Drill coordinates"

#: appTools/ToolDblSided.py:903
msgid ""
"Add alignment drill holes coordinates in the format: (x1, y1), (x2, "
"y2), ... \n"
"on one side of the alignment axis.\n"
"\n"
"The coordinates set can be obtained:\n"
"- press SHIFT key and left mouse clicking on canvas. Then click Add.\n"
"- press SHIFT key and left mouse clicking on canvas. Then Ctrl+V in the "
"field.\n"
"- press SHIFT key and left mouse clicking on canvas. Then RMB click in the "
"field and click Paste.\n"
"- by entering the coords manually in the format: (x1, y1), (x2, y2), ..."
msgstr ""
"Add alignment drill holes coordinates in the format: (x1, y1), (x2, "
"y2), ... \n"
"on one side of the alignment axis.\n"
"\n"
"The coordinates set can be obtained:\n"
"- press SHIFT key and left mouse clicking on canvas. Then click Add.\n"
"- press SHIFT key and left mouse clicking on canvas. Then Ctrl+V in the "
"field.\n"
"- press SHIFT key and left mouse clicking on canvas. Then RMB click in the "
"field and click Paste.\n"
"- by entering the coords manually in the format: (x1, y1), (x2, y2), ..."

#: appTools/ToolDblSided.py:918
msgid "Delete Last"
msgstr "Delete Last"

#: appTools/ToolDblSided.py:920
msgid "Delete the last coordinates tuple in the list."
msgstr "Delete the last coordinates tuple in the list."

#: appTools/ToolDblSided.py:930
msgid "Create Excellon Object"
msgstr "Create Excellon Object"

#: appTools/ToolDistance.py:177
msgid "Working"
msgstr "Working"

#: appTools/ToolDistance.py:182
msgid "MEASURING: Click on the Start point ..."
msgstr "MEASURING: Click on the Start point ..."

#: appTools/ToolDistance.py:242 appTools/ToolDistance.py:648
#: appTools/ToolDistanceMin.py:302
msgid "Measure"
msgstr "Measure"

#: appTools/ToolDistance.py:292
msgid "Distance Tool finished."
msgstr "Distance Tool finished."

#: appTools/ToolDistance.py:364
msgid "Pads overlapped. Aborting."
msgstr "Pads overlapped. Aborting."

#: appTools/ToolDistance.py:392
msgid "Distance Tool cancelled."
msgstr "Distance Tool cancelled."

#: appTools/ToolDistance.py:397
msgid "MEASURING: Click on the Destination point ..."
msgstr "MEASURING: Click on the Destination point ..."

#: appTools/ToolDistance.py:406 appTools/ToolDistanceMin.py:197
msgid "MEASURING"
msgstr "MEASURING"

#: appTools/ToolDistance.py:407 appTools/ToolDistanceMin.py:198
msgid "Result"
msgstr "Result"

#: appTools/ToolDistance.py:563 appTools/ToolDistanceMin.py:238
msgid "Those are the units in which the distance is measured."
msgstr "Those are the units in which the distance is measured."

#: appTools/ToolDistance.py:564 appTools/ToolDistanceMin.py:239
msgid "METRIC (mm)"
msgstr "METRIC (mm)"

#: appTools/ToolDistance.py:564 appTools/ToolDistanceMin.py:239
msgid "INCH (in)"
msgstr "INCH (in)"

#: appTools/ToolDistance.py:570
msgid "Snap to center"
msgstr "Snap to center"

#: appTools/ToolDistance.py:572
msgid ""
"Mouse cursor will snap to the center of the pad/drill\n"
"when it is hovering over the geometry of the pad/drill."
msgstr ""
"Mouse cursor will snap to the center of the pad/drill\n"
"when it is hovering over the geometry of the pad/drill."

#: appTools/ToolDistance.py:582
msgid "Start Coords"
msgstr "Start Coords"

#: appTools/ToolDistance.py:583 appTools/ToolDistance.py:588
msgid "This is measuring Start point coordinates."
msgstr "This is measuring Start point coordinates."

#: appTools/ToolDistance.py:593
msgid "Stop Coords"
msgstr "Stop Coords"

#: appTools/ToolDistance.py:594 appTools/ToolDistance.py:599
msgid "This is the measuring Stop point coordinates."
msgstr "This is the measuring Stop point coordinates."

#: appTools/ToolDistance.py:604 appTools/ToolDistanceMin.py:250
msgid "Dx"
msgstr "Dx"

#: appTools/ToolDistance.py:605 appTools/ToolDistance.py:610
#: appTools/ToolDistanceMin.py:251 appTools/ToolDistanceMin.py:280
msgid "This is the distance measured over the X axis."
msgstr "This is the distance measured over the X axis."

#: appTools/ToolDistance.py:615 appTools/ToolDistanceMin.py:253
msgid "Dy"
msgstr "Dy"

#: appTools/ToolDistance.py:616 appTools/ToolDistance.py:621
#: appTools/ToolDistanceMin.py:254 appTools/ToolDistanceMin.py:285
msgid "This is the distance measured over the Y axis."
msgstr "This is the distance measured over the Y axis."

#: appTools/ToolDistance.py:627 appTools/ToolDistance.py:632
#: appTools/ToolDistanceMin.py:257 appTools/ToolDistanceMin.py:290
msgid "This is orientation angle of the measuring line."
msgstr "This is orientation angle of the measuring line."

#: appTools/ToolDistance.py:637 appTools/ToolDistanceMin.py:259
msgid "DISTANCE"
msgstr "DISTANCE"

#: appTools/ToolDistance.py:638 appTools/ToolDistance.py:643
msgid "This is the point to point Euclidian distance."
msgstr "This is the point to point Euclidian distance."

#: appTools/ToolDistanceMin.py:56 appTools/ToolDistanceMin.py:221
msgid "Minimum Distance Tool"
msgstr "Minimum Distance Tool"

#: appTools/ToolDistanceMin.py:67
msgid ""
"Select two objects and no more, to measure the distance between them ..."
msgstr ""
"Select two objects and no more, to measure the distance between them ..."

#: appTools/ToolDistanceMin.py:108 appTools/ToolDistanceMin.py:129
#: appTools/ToolDistanceMin.py:138 appTools/ToolDistanceMin.py:159
msgid "Select two objects and no more. Currently the selection has objects: "
msgstr "Select two objects and no more. Currently the selection has objects: "

#: appTools/ToolDistanceMin.py:206
msgid "Objects intersects or touch at"
msgstr "Objects intersects or touch at"

#: appTools/ToolDistanceMin.py:212
msgid "Jumped to the half point between the two selected objects"
msgstr "Jumped to the half point between the two selected objects"

#: appTools/ToolDistanceMin.py:242
msgid "First object point"
msgstr "First object point"

#: appTools/ToolDistanceMin.py:243 appTools/ToolDistanceMin.py:268
msgid ""
"This is first object point coordinates.\n"
"This is the start point for measuring distance."
msgstr ""
"This is first object point coordinates.\n"
"This is the start point for measuring distance."

#: appTools/ToolDistanceMin.py:246
msgid "Second object point"
msgstr "Second object point"

#: appTools/ToolDistanceMin.py:247 appTools/ToolDistanceMin.py:274
msgid ""
"This is second object point coordinates.\n"
"This is the end point for measuring distance."
msgstr ""
"This is second object point coordinates.\n"
"This is the end point for measuring distance."

#: appTools/ToolDistanceMin.py:260 appTools/ToolDistanceMin.py:295
msgid "This is the point to point Euclidean distance."
msgstr "This is the point to point Euclidean distance."

#: appTools/ToolDistanceMin.py:262
msgid "Half Point"
msgstr "Half Point"

#: appTools/ToolDistanceMin.py:263 appTools/ToolDistanceMin.py:300
msgid "This is the middle point of the point to point Euclidean distance."
msgstr "This is the middle point of the point to point Euclidean distance."

#: appTools/ToolDistanceMin.py:305
msgid "Jump to Half Point"
msgstr "Jump to Half Point"

#: appTools/ToolDrilling.py:1195 appTools/ToolIsolation.py:772
#: appTools/ToolMilling.py:962 appTools/ToolNCC.py:444
#: appTools/ToolPaint.py:381
msgid "Current Tool parameters were applied to all tools."
msgstr "Current Tool parameters were applied to all tools."

#: appTools/ToolDrilling.py:1600 camlib.py:3641
msgid "The loaded Excellon file has no drills"
msgstr "The loaded Excellon file has no drills"

#: appTools/ToolDrilling.py:1645 camlib.py:3563
msgid "Creating a list of points to drill..."
msgstr "Creating a list of points to drill..."

#: appTools/ToolDrilling.py:1652 camlib.py:3592
msgid "Failed. Drill points inside the exclusion zones."
msgstr "Failed. Drill points inside the exclusion zones."

#: appTools/ToolDrilling.py:1668 camlib.py:3631 camlib.py:5024 camlib.py:5792
msgid "Starting G-Code"
msgstr "Starting G-Code"

#: appTools/ToolDrilling.py:1673 appTools/ToolMilling.py:1355
#, fuzzy
#| msgid "Generating panel ..."
msgid "Generating Excellon CNCJob..."
msgstr "Generating panel ..."

#: appTools/ToolDrilling.py:1791 camlib.py:3161 camlib.py:5294 camlib.py:5654
msgid "The Toolchange X,Y format has to be (x, y)."
msgstr ""

#: appTools/ToolDrilling.py:2034 appTools/ToolMilling.py:1639
#, fuzzy
#| msgid "Excellon object with alignment drills created..."
msgid "Excellon object for drilling/milling operation."
msgstr "Excellon object with alignment drills created..."

#: appTools/ToolDrilling.py:2098
msgid "Search DB"
msgstr ""

#: appTools/ToolDrilling.py:2101
msgid ""
"Will search and try to replace the tools from Tools Table\n"
"with tools from DB that have a close diameter value."
msgstr ""

#: appTools/ToolDrilling.py:2500 appTools/ToolMilling.py:2168
msgid ""
"The preprocessor JSON file that dictates\n"
"Gcode output for Excellon Objects."
msgstr ""
"The preprocessor JSON file that dictates\n"
"Gcode output for Excellon Objects."

#: appTools/ToolDrilling.py:2632 appTools/ToolMilling.py:2307
#, fuzzy
#| msgid ""
#| "Add / Select at least one tool in the tool-table.\n"
#| "Click the # header to select all, or Ctrl + LMB\n"
#| "for custom selection of tools."
msgid ""
"Generate the CNC Job.\n"
"If milling then an additional Geometry object will be created.\n"
"Add / Select at least one tool in the tool-table.\n"
"Click the # header to select all, or Ctrl + LMB\n"
"for custom selection of tools."
msgstr ""
"Add / Select at least one tool in the tool-table.\n"
"Click the # header to select all, or Ctrl + LMB\n"
"for custom selection of tools."

#: appTools/ToolEtchCompensation.py:293 appTools/ToolInvertGerber.py:217
msgid "Gerber object that will be inverted."
msgstr "Gerber object that will be inverted."

#: appTools/ToolEtchCompensation.py:304
msgid "Utilities"
msgstr "Utilities"

#: appTools/ToolEtchCompensation.py:305
msgid "Conversion utilities"
msgstr "Conversion utilities"

#: appTools/ToolEtchCompensation.py:310
msgid "Oz to Microns"
msgstr "Oz to Microns"

#: appTools/ToolEtchCompensation.py:312
msgid ""
"Will convert from oz thickness to microns [um].\n"
"Can use formulas with operators: /, *, +, -, %, .\n"
"The real numbers use the dot decimals separator."
msgstr ""
"Will convert from oz thickness to microns [um].\n"
"Can use formulas with operators: /, *, +, -, %, .\n"
"The real numbers use the dot decimals separator."

#: appTools/ToolEtchCompensation.py:321
msgid "Oz value"
msgstr "Oz value"

#: appTools/ToolEtchCompensation.py:323 appTools/ToolEtchCompensation.py:344
msgid "Microns value"
msgstr "Microns value"

#: appTools/ToolEtchCompensation.py:331
msgid "Mils to Microns"
msgstr "Mils to Microns"

#: appTools/ToolEtchCompensation.py:333
msgid ""
"Will convert from mils to microns [um].\n"
"Can use formulas with operators: /, *, +, -, %, .\n"
"The real numbers use the dot decimals separator."
msgstr ""
"Will convert from mils to microns [um].\n"
"Can use formulas with operators: /, *, +, -, %, .\n"
"The real numbers use the dot decimals separator."

#: appTools/ToolEtchCompensation.py:342
msgid "Mils value"
msgstr "Mils value"

#: appTools/ToolEtchCompensation.py:357 appTools/ToolInvertGerber.py:229
msgid "Parameters for this tool"
msgstr "Parameters for this tool"

#: appTools/ToolEtchCompensation.py:362
msgid "Copper Thickness"
msgstr "Copper Thickness"

#: appTools/ToolEtchCompensation.py:364
msgid ""
"The thickness of the copper foil.\n"
"In microns [um]."
msgstr ""
"The thickness of the copper foil.\n"
"In microns [um]."

#: appTools/ToolEtchCompensation.py:375
msgid "Ratio"
msgstr "Ratio"

#: appTools/ToolEtchCompensation.py:377
msgid ""
"The ratio of lateral etch versus depth etch.\n"
"Can be:\n"
"- custom -> the user will enter a custom value\n"
"- preselection -> value which depends on a selection of etchants"
msgstr ""
"The ratio of lateral etch versus depth etch.\n"
"Can be:\n"
"- custom -> the user will enter a custom value\n"
"- preselection -> value which depends on a selection of etchants"

#: appTools/ToolEtchCompensation.py:383
msgid "Etch Factor"
msgstr "Etch Factor"

#: appTools/ToolEtchCompensation.py:384
msgid "Etchants list"
msgstr "Etchants list"

#: appTools/ToolEtchCompensation.py:385
msgid "Manual offset"
msgstr "Manual offset"

#: appTools/ToolEtchCompensation.py:392 appTools/ToolEtchCompensation.py:397
msgid "Etchants"
msgstr "Etchants"

#: appTools/ToolEtchCompensation.py:394
msgid "A list of etchants."
msgstr "A list of etchants."

#: appTools/ToolEtchCompensation.py:398
msgid "Alkaline baths"
msgstr "Alkaline baths"

#: appTools/ToolEtchCompensation.py:404
msgid "Etch factor"
msgstr "Etch factor"

#: appTools/ToolEtchCompensation.py:406
msgid ""
"The ratio between depth etch and lateral etch .\n"
"Accepts real numbers and formulas using the operators: /,*,+,-,%"
msgstr ""
"The ratio between depth etch and lateral etch .\n"
"Accepts real numbers and formulas using the operators: /,*,+,-,%"

#: appTools/ToolEtchCompensation.py:410
msgid "Real number or formula"
msgstr "Real number or formula"

#: appTools/ToolEtchCompensation.py:411
msgid "Etch_factor"
msgstr "Etch_factor"

#: appTools/ToolEtchCompensation.py:419
msgid ""
"Value with which to increase or decrease (buffer)\n"
"the copper features. In microns [um]."
msgstr ""
"Value with which to increase or decrease (buffer)\n"
"the copper features. In microns [um]."

#: appTools/ToolEtchCompensation.py:443
msgid "Compensate"
msgstr "Compensate"

#: appTools/ToolEtchCompensation.py:445
msgid ""
"Will increase the copper features thickness to compensate the lateral etch."
msgstr ""
"Will increase the copper features thickness to compensate the lateral etch."

#: appTools/ToolExtractDrills.py:189 appTools/ToolExtractDrills.py:279
#: appTools/ToolExtractDrills.py:369
msgid "No drills extracted. Try different parameters."
msgstr "No drills extracted. Try different parameters."

#: appTools/ToolExtractDrills.py:420 appTools/ToolExtractDrills.py:687
msgid "Extract Drills"
msgstr "Extract Drills"

#: appTools/ToolExtractDrills.py:454
msgid "Gerber from which to extract drill holes"
msgstr "Gerber from which to extract drill holes"

#: appTools/ToolExtractDrills.py:689
msgid "Extract drills from a given Gerber file."
msgstr "Extract drills from a given Gerber file."

#: appTools/ToolFiducials.py:237
msgid "Click to add first Fiducial. Bottom Left..."
msgstr "Click to add first Fiducial. Bottom Left..."

#: appTools/ToolFiducials.py:501
msgid "Click to add the last fiducial. Top Right..."
msgstr "Click to add the last fiducial. Top Right..."

#: appTools/ToolFiducials.py:506
msgid "Click to add the second fiducial. Top Left or Bottom Right..."
msgstr "Click to add the second fiducial. Top Left or Bottom Right..."

#: appTools/ToolFiducials.py:509 appTools/ToolFiducials.py:518
msgid "Done. All fiducials have been added."
msgstr "Done. All fiducials have been added."

#: appTools/ToolFiducials.py:595
msgid "Fiducials Tool exit."
msgstr "Fiducials Tool exit."

#: appTools/ToolFiducials.py:667
msgid "Fiducials Coordinates"
msgstr "Fiducials Coordinates"

#: appTools/ToolFiducials.py:669
msgid ""
"A table with the fiducial points coordinates,\n"
"in the format (x, y)."
msgstr ""
"A table with the fiducial points coordinates,\n"
"in the format (x, y)."

#: appTools/ToolFiducials.py:805
msgid ""
"- 'Auto' - automatic placement of fiducials in the corners of the bounding "
"box.\n"
" - 'Manual' - manual placement of fiducials."
msgstr ""
"- 'Auto' - automatic placement of fiducials in the corners of the bounding "
"box.\n"
" - 'Manual' - manual placement of fiducials."

#: appTools/ToolFiducials.py:851
msgid "Thickness of the line that makes the fiducial."
msgstr "Thickness of the line that makes the fiducial."

#: appTools/ToolFiducials.py:882
msgid "Add Fiducial"
msgstr "Add Fiducial"

#: appTools/ToolFiducials.py:884
msgid "Will add a polygon on the copper layer to serve as fiducial."
msgstr "Will add a polygon on the copper layer to serve as fiducial."

#: appTools/ToolFiducials.py:900
msgid "Soldermask Gerber"
msgstr "Soldermask Gerber"

#: appTools/ToolFiducials.py:902
msgid "The Soldermask Gerber object."
msgstr "The Soldermask Gerber object."

#: appTools/ToolFiducials.py:914
msgid "Add Soldermask Opening"
msgstr "Add Soldermask Opening"

#: appTools/ToolFiducials.py:916
msgid ""
"Will add a polygon on the soldermask layer\n"
"to serve as fiducial opening.\n"
"The diameter is always double of the diameter\n"
"for the copper fiducial."
msgstr ""
"Will add a polygon on the soldermask layer\n"
"to serve as fiducial opening.\n"
"The diameter is always double of the diameter\n"
"for the copper fiducial."

#: appTools/ToolFilm.py:158
msgid "No FlatCAM object selected. Load an object for Film and retry."
msgstr "No FlatCAM object selected. Load an object for Film and retry."

#: appTools/ToolFilm.py:165
msgid "No FlatCAM object selected. Load an object for Box and retry."
msgstr "No FlatCAM object selected. Load an object for Box and retry."

#: appTools/ToolFilm.py:169
msgid "No FlatCAM object selected."
msgstr "No FlatCAM object selected."

#: appTools/ToolFilm.py:180
msgid "Generating Film ..."
msgstr "Generating Film ..."

#: appTools/ToolFilm.py:229 appTools/ToolFilm.py:233
msgid "Export positive film"
msgstr "Export positive film"

#: appTools/ToolFilm.py:266
msgid ""
"No Excellon object selected. Load an object for punching reference and retry."
msgstr ""
"No Excellon object selected. Load an object for punching reference and retry."

#: appTools/ToolFilm.py:290
msgid ""
" Could not generate punched hole film because the punch hole sizeis bigger "
"than some of the apertures in the Gerber object."
msgstr ""
" Could not generate punched hole film because the punch hole sizeis bigger "
"than some of the apertures in the Gerber object."

#: appTools/ToolFilm.py:302
msgid ""
"Could not generate punched hole film because the punch hole sizeis bigger "
"than some of the apertures in the Gerber object."
msgstr ""
"Could not generate punched hole film because the punch hole sizeis bigger "
"than some of the apertures in the Gerber object."

#: appTools/ToolFilm.py:320
msgid ""
"Could not generate punched hole film because the newly created object "
"geometry is the same as the one in the source object geometry..."
msgstr ""
"Could not generate punched hole film because the newly created object "
"geometry is the same as the one in the source object geometry..."

#: appTools/ToolFilm.py:375 appTools/ToolFilm.py:379
msgid "Export negative film"
msgstr "Export negative film"

#: appTools/ToolFilm.py:438 appTools/ToolFilm.py:690
#: appTools/ToolPanelize.py:209
msgid "No object Box. Using instead"
msgstr "No object Box. Using instead"

#: appTools/ToolFilm.py:627 appTools/ToolFilm.py:875
msgid "Film file exported to"
msgstr "Film file exported to"

#: appTools/ToolFilm.py:901
msgid "Film PCB"
msgstr "Film PCB"

#: appTools/ToolFilm.py:933
msgid ""
"Specify the type of object for which to create the film.\n"
"The object can be of type: Gerber or Geometry.\n"
"The selection here decide the type of objects that will be\n"
"in the Film Object combobox."
msgstr ""
"Specify the type of object for which to create the film.\n"
"The object can be of type: Gerber or Geometry.\n"
"The selection here decide the type of objects that will be\n"
"in the Film Object combobox."

#: appTools/ToolFilm.py:956
msgid ""
"Specify the type of object to be used as an container for\n"
"film creation. It can be: Gerber or Geometry type.The selection here decide "
"the type of objects that will be\n"
"in the Box Object combobox."
msgstr ""
"Specify the type of object to be used as an container for\n"
"film creation. It can be: Gerber or Geometry type.The selection here decide "
"the type of objects that will be\n"
"in the Box Object combobox."

#: appTools/ToolFilm.py:1123
msgid "Film Parameters"
msgstr "Film Parameters"

#: appTools/ToolFilm.py:1182
msgid "Punch drill holes"
msgstr "Punch drill holes"

#: appTools/ToolFilm.py:1183
msgid ""
"When checked the generated film will have holes in pads when\n"
"the generated film is positive. This is done to help drilling,\n"
"when done manually."
msgstr ""
"When checked the generated film will have holes in pads when\n"
"the generated film is positive. This is done to help drilling,\n"
"when done manually."

#: appTools/ToolFilm.py:1201
msgid "Source"
msgstr "Source"

#: appTools/ToolFilm.py:1203
msgid ""
"The punch hole source can be:\n"
"- Excellon -> an Excellon holes center will serve as reference.\n"
"- Pad Center -> will try to use the pads center as reference."
msgstr ""
"The punch hole source can be:\n"
"- Excellon -> an Excellon holes center will serve as reference.\n"
"- Pad Center -> will try to use the pads center as reference."

#: appTools/ToolFilm.py:1208
msgid "Pad center"
msgstr "Pad center"

#: appTools/ToolFilm.py:1213
msgid "Excellon Obj"
msgstr "Excellon Obj"

#: appTools/ToolFilm.py:1215
msgid ""
"Remove the geometry of Excellon from the Film to create the holes in pads."
msgstr ""
"Remove the geometry of Excellon from the Film to create the holes in pads."

#: appTools/ToolFilm.py:1229
msgid "Punch Size"
msgstr "Punch Size"

#: appTools/ToolFilm.py:1230
msgid "The value here will control how big is the punch hole in the pads."
msgstr "The value here will control how big is the punch hole in the pads."

#: appTools/ToolFilm.py:1364
msgid "Save Film"
msgstr "Save Film"

#: appTools/ToolFilm.py:1367
msgid ""
"Create a Film for the selected object, within\n"
"the specified box. Does not create a new \n"
" FlatCAM object, but directly save it in the\n"
"selected format."
msgstr ""
"Create a Film for the selected object, within\n"
"the specified box. Does not create a new \n"
" FlatCAM object, but directly save it in the\n"
"selected format."

#: appTools/ToolFilm.py:1449
msgid ""
"Using the Pad center does not work on Geometry objects. Only a Gerber object "
"has pads."
msgstr ""
"Using the Pad center does not work on Geometry objects. Only a Gerber object "
"has pads."

#: appTools/ToolImage.py:65
msgid "Image Tool"
msgstr "Image Tool"

#: appTools/ToolImage.py:95 appTools/ToolImage.py:98
msgid "Import IMAGE"
msgstr "Import IMAGE"

#: appTools/ToolImage.py:142 app_Main.py:8887 app_Main.py:8937
msgid ""
"Not supported type is picked as parameter. Only Geometry and Gerber are "
"supported"
msgstr ""
"Not supported type is picked as parameter. Only Geometry and Gerber are "
"supported"

#: appTools/ToolImage.py:150
msgid "Importing Image"
msgstr "Importing Image"

#: appTools/ToolImage.py:162 appTools/ToolPDF.py:154 app_Main.py:8915
#: app_Main.py:8970 app_Main.py:9034 app_Main.py:9097 app_Main.py:9163
#: app_Main.py:9228 app_Main.py:9285
msgid "Opened"
msgstr "Opened"

#: appTools/ToolImage.py:167
msgid "Image as Object"
msgstr "Image as Object"

#: appTools/ToolImage.py:198
msgid ""
"Specify the type of object to create from the image.\n"
"It can be of type: Gerber or Geometry."
msgstr ""
"Specify the type of object to create from the image.\n"
"It can be of type: Gerber or Geometry."

#: appTools/ToolImage.py:207
msgid "DPI value"
msgstr "DPI value"

#: appTools/ToolImage.py:208
msgid "Specify a DPI value for the image."
msgstr "Specify a DPI value for the image."

#: appTools/ToolImage.py:214
msgid "Level of detail"
msgstr "Level of detail"

#: appTools/ToolImage.py:223
msgid "Image type"
msgstr "Image type"

#: appTools/ToolImage.py:225
msgid ""
"Choose a method for the image interpretation.\n"
"B/W means a black & white image. Color means a colored image."
msgstr ""
"Choose a method for the image interpretation.\n"
"B/W means a black & white image. Color means a colored image."

#: appTools/ToolImage.py:234 appTools/ToolImage.py:249
#: appTools/ToolImage.py:262 appTools/ToolImage.py:275
msgid "Mask value"
msgstr "Mask value"

#: appTools/ToolImage.py:236
msgid ""
"Mask for monochrome image.\n"
"Takes values between [0 ... 255].\n"
"Decides the level of details to include\n"
"in the resulting geometry.\n"
"0 means no detail and 255 means everything \n"
"(which is totally black)."
msgstr ""
"Mask for monochrome image.\n"
"Takes values between [0 ... 255].\n"
"Decides the level of details to include\n"
"in the resulting geometry.\n"
"0 means no detail and 255 means everything \n"
"(which is totally black)."

#: appTools/ToolImage.py:251
msgid ""
"Mask for RED color.\n"
"Takes values between [0 ... 255].\n"
"Decides the level of details to include\n"
"in the resulting geometry."
msgstr ""
"Mask for RED color.\n"
"Takes values between [0 ... 255].\n"
"Decides the level of details to include\n"
"in the resulting geometry."

#: appTools/ToolImage.py:264
msgid ""
"Mask for GREEN color.\n"
"Takes values between [0 ... 255].\n"
"Decides the level of details to include\n"
"in the resulting geometry."
msgstr ""
"Mask for GREEN color.\n"
"Takes values between [0 ... 255].\n"
"Decides the level of details to include\n"
"in the resulting geometry."

#: appTools/ToolImage.py:277
msgid ""
"Mask for BLUE color.\n"
"Takes values between [0 ... 255].\n"
"Decides the level of details to include\n"
"in the resulting geometry."
msgstr ""
"Mask for BLUE color.\n"
"Takes values between [0 ... 255].\n"
"Decides the level of details to include\n"
"in the resulting geometry."

#: appTools/ToolImage.py:285
msgid "Import image"
msgstr "Import image"

#: appTools/ToolImage.py:287
msgid "Open a image of raster type and then import it in FlatCAM."
msgstr "Open a image of raster type and then import it in FlatCAM."

#: appTools/ToolInvertGerber.py:75
msgid "Invert Tool"
msgstr "Invert Tool"

#: appTools/ToolInvertGerber.py:269
msgid "Invert Gerber"
msgstr "Invert Gerber"

#: appTools/ToolInvertGerber.py:271
msgid ""
"Will invert the Gerber object: areas that have copper\n"
"will be empty of copper and previous empty area will be\n"
"filled with copper."
msgstr ""
"Will invert the Gerber object: areas that have copper\n"
"will be empty of copper and previous empty area will be\n"
"filled with copper."

#: appTools/ToolIsolation.py:776 appTools/ToolNCC.py:449
#: appTools/ToolPaint.py:386 appTools/ToolSolderPaste.py:122
msgid "New Tool"
msgstr "New Tool"

#: appTools/ToolIsolation.py:789 appTools/ToolNCC.py:462
#: appTools/ToolPaint.py:399 appTools/ToolSolderPaste.py:135 app_Main.py:4494
msgid "Adding Tool cancelled"
msgstr "Adding Tool cancelled"

#: appTools/ToolIsolation.py:934 appTools/ToolNCC.py:864
#: appTools/ToolOptimal.py:179
msgid ""
"The Gerber object has one Polygon as geometry.\n"
"There are no distances between geometry elements to be found."
msgstr ""
"The Gerber object has one Polygon as geometry.\n"
"There are no distances between geometry elements to be found."

#: appTools/ToolIsolation.py:977 appTools/ToolNCC.py:907
#, fuzzy
#| msgid "tooldia = tool diameter"
msgid "Optimal tool diameter found"
msgstr "tooldia = tool diameter"

#: appTools/ToolIsolation.py:1022 appTools/ToolIsolation.py:1109
#: appTools/ToolIsolation.py:1171 appTools/ToolIsolation.py:2588
#: appTools/ToolNCC.py:954 appTools/ToolNCC.py:1042 appTools/ToolNCC.py:1104
#: appTools/ToolNCC.py:3650 appTools/ToolPaint.py:693 appTools/ToolPaint.py:781
#: appTools/ToolPaint.py:843 appTools/ToolPaint.py:2675
#: appTools/ToolSolderPaste.py:488
msgid "Cancelled. Tool already in Tool Table."
msgstr "Cancelled. Tool already in Tool Table."

#: appTools/ToolIsolation.py:1137 appTools/ToolNCC.py:1070
#: appTools/ToolPaint.py:809
#, fuzzy
#| msgid "New tool added to Tool Table."
msgid "New tool added to Tool Table from Tools Database."
msgstr "New tool added to Tool Table."

#: appTools/ToolIsolation.py:1201 appTools/ToolNCC.py:1134
#: appTools/ToolPaint.py:872
#, fuzzy
#| msgid "New tool added to Tool Table."
msgid "Default tool added to Tool Table."
msgstr "New tool added to Tool Table."

#: appTools/ToolIsolation.py:1227 appTools/ToolNCC.py:1160
#: appTools/ToolPaint.py:897
msgid "Tool from Tool Table was edited."
msgstr "Tool from Tool Table was edited."

#: appTools/ToolIsolation.py:1240 appTools/ToolNCC.py:1173
#: appTools/ToolPaint.py:910 appTools/ToolSolderPaste.py:548
msgid "Cancelled. New diameter value is already in the Tool Table."
msgstr "Cancelled. New diameter value is already in the Tool Table."

#: appTools/ToolIsolation.py:1291 appTools/ToolNCC.py:1224
#: appTools/ToolPaint.py:960
msgid "Delete failed. Select a tool to delete."
msgstr "Delete failed. Select a tool to delete."

#: appTools/ToolIsolation.py:1297 appTools/ToolNCC.py:1230
#: appTools/ToolPaint.py:966
msgid "Tool(s) deleted from Tool Table."
msgstr "Tool(s) deleted from Tool Table."

#: appTools/ToolIsolation.py:1345
msgid "Isolating..."
msgstr "Isolating..."

#: appTools/ToolIsolation.py:1365
msgid "Following geometry was generated"
msgstr "Following geometry was generated"

#: appTools/ToolIsolation.py:1380
msgid "Failed to create Follow Geometry with tool diameter"
msgstr "Failed to create Follow Geometry with tool diameter"

#: appTools/ToolIsolation.py:1383
msgid "Follow Geometry was created with tool diameter"
msgstr "Follow Geometry was created with tool diameter"

#: appTools/ToolIsolation.py:1424
msgid "Click on a polygon to isolate it."
msgstr "Click on a polygon to isolate it."

#: appTools/ToolIsolation.py:1470 appTools/ToolIsolation.py:1672
#: appTools/ToolIsolation.py:1859 appTools/ToolNCC.py:1295
#: appTools/ToolPaint.py:1030 appTools/ToolPaint.py:1743
msgid "No selected tools in Tool Table."
msgstr "No selected tools in Tool Table."

#: appTools/ToolIsolation.py:1552 appTools/ToolIsolation.py:1575
#: appTools/ToolIsolation.py:1732 appTools/ToolIsolation.py:1925
msgid "Subtracting Geo"
msgstr "Subtracting Geo"

#: appTools/ToolIsolation.py:1556 appTools/ToolIsolation.py:1736
#: appTools/ToolIsolation.py:1929
msgid "Intersecting Geo"
msgstr "Intersecting Geo"

#: appTools/ToolIsolation.py:1608 appTools/ToolIsolation.py:1805
#: appTools/ToolIsolation.py:1994
msgid "Empty Geometry in"
msgstr "Empty Geometry in"

#: appTools/ToolIsolation.py:1814
msgid ""
"Partial failure. The geometry was processed with all tools.\n"
"But there are still not-isolated geometry elements. Try to include a tool "
"with smaller diameter."
msgstr ""
"Partial failure. The geometry was processed with all tools.\n"
"But there are still not-isolated geometry elements. Try to include a tool "
"with smaller diameter."

#: appTools/ToolIsolation.py:1817
msgid ""
"The following are coordinates for the copper features that could not be "
"isolated:"
msgstr ""
"The following are coordinates for the copper features that could not be "
"isolated:"

#: appTools/ToolIsolation.py:2158 appTools/ToolIsolation.py:2271
#: appTools/ToolPaint.py:1125
msgid "Added polygon"
msgstr "Added polygon"

#: appTools/ToolIsolation.py:2159 appTools/ToolIsolation.py:2273
msgid "Click to add next polygon or right click to start isolation."
msgstr "Click to add next polygon or right click to start isolation."

#: appTools/ToolIsolation.py:2171 appTools/ToolPaint.py:1139
msgid "Removed polygon"
msgstr "Removed polygon"

#: appTools/ToolIsolation.py:2172
msgid "Click to add/remove next polygon or right click to start isolation."
msgstr "Click to add/remove next polygon or right click to start isolation."

#: appTools/ToolIsolation.py:2177 appTools/ToolPaint.py:1145
msgid "No polygon detected under click position."
msgstr "No polygon detected under click position."

#: appTools/ToolIsolation.py:2207 appTools/ToolPaint.py:1175
msgid "List of single polygons is empty. Aborting."
msgstr "List of single polygons is empty. Aborting."

#: appTools/ToolIsolation.py:2276
msgid "No polygon in selection."
msgstr "No polygon in selection."

#: appTools/ToolIsolation.py:2304
msgid "Click the end point of the paint area."
msgstr "Click the end point of the paint area."

#: appTools/ToolIsolation.py:2552 appTools/ToolNCC.py:3614
#: appTools/ToolPaint.py:2632 app_Main.py:5773 app_Main.py:5783
msgid "Tool from DB added in Tool Table."
msgstr "Tool from DB added in Tool Table."

#: appTools/ToolIsolation.py:2606 appTools/ToolNCC.py:3667
#: appTools/ToolPaint.py:2692
msgid "New tool added to Tool Table."
msgstr "New tool added to Tool Table."

#: appTools/ToolIsolation.py:2950
msgid "Gerber object for isolation routing."
msgstr "Gerber object for isolation routing."

#: appTools/ToolIsolation.py:2974 appTools/ToolNCC.py:3767
msgid ""
"Tools pool from which the algorithm\n"
"will pick the ones used for copper clearing."
msgstr ""
"Tools pool from which the algorithm\n"
"will pick the ones used for copper clearing."

#: appTools/ToolIsolation.py:2990
msgid ""
"This is the Tool Number.\n"
"Isolation routing will start with the tool with the biggest \n"
"diameter, continuing until there are no more tools.\n"
"Only tools that create Isolation geometry will still be present\n"
"in the resulting geometry. This is because with some tools\n"
"this function will not be able to create routing geometry."
msgstr ""
"This is the Tool Number.\n"
"Isolation routing will start with the tool with the biggest \n"
"diameter, continuing until there are no more tools.\n"
"Only tools that create Isolation geometry will still be present\n"
"in the resulting geometry. This is because with some tools\n"
"this function will not be able to create routing geometry."

#: appTools/ToolIsolation.py:2998 appTools/ToolNCC.py:3791
msgid ""
"Tool Diameter. It's value (in current FlatCAM units)\n"
"is the cut width into the material."
msgstr ""
"Tool Diameter. It's value (in current FlatCAM units)\n"
"is the cut width into the material."

#: appTools/ToolIsolation.py:3002 appTools/ToolNCC.py:3795
msgid ""
"The Tool Type (TT) can be:\n"
"- Circular with 1 ... 4 teeth -> it is informative only. Being circular,\n"
"the cut width in material is exactly the tool diameter.\n"
"- Ball -> informative only and make reference to the Ball type endmill.\n"
"- V-Shape -> it will disable Z-Cut parameter in the resulting geometry UI "
"form\n"
"and enable two additional UI form fields in the resulting geometry: V-Tip "
"Dia and\n"
"V-Tip Angle. Adjusting those two values will adjust the Z-Cut parameter "
"such\n"
"as the cut width into material will be equal with the value in the Tool "
"Diameter\n"
"column of this table.\n"
"Choosing the 'V-Shape' Tool Type automatically will select the Operation "
"Type\n"
"in the resulting geometry as Isolation."
msgstr ""
"The Tool Type (TT) can be:\n"
"- Circular with 1 ... 4 teeth -> it is informative only. Being circular,\n"
"the cut width in material is exactly the tool diameter.\n"
"- Ball -> informative only and make reference to the Ball type endmill.\n"
"- V-Shape -> it will disable Z-Cut parameter in the resulting geometry UI "
"form\n"
"and enable two additional UI form fields in the resulting geometry: V-Tip "
"Dia and\n"
"V-Tip Angle. Adjusting those two values will adjust the Z-Cut parameter "
"such\n"
"as the cut width into material will be equal with the value in the Tool "
"Diameter\n"
"column of this table.\n"
"Choosing the 'V-Shape' Tool Type automatically will select the Operation "
"Type\n"
"in the resulting geometry as Isolation."

#: appTools/ToolIsolation.py:3070 appTools/ToolNCC.py:3875
#, fuzzy
#| msgid "Optimal Tool"
msgid "Optimal"
msgstr "Optimal Tool"

#: appTools/ToolIsolation.py:3074 appTools/ToolNCC.py:3879
msgid ""
"Find a tool diameter that is guaranteed\n"
"to do a complete isolation."
msgstr ""

#: appTools/ToolIsolation.py:3115 appTools/ToolNCC.py:3919
#: appTools/ToolPaint.py:2928 appTools/ToolSolderPaste.py:1211
msgid ""
"Delete a selection of tools in the Tool Table\n"
"by first selecting a row(s) in the Tool Table."
msgstr ""
"Delete a selection of tools in the Tool Table\n"
"by first selecting a row(s) in the Tool Table."

#: appTools/ToolIsolation.py:3293
msgid ""
"Specify the type of object to be excepted from isolation.\n"
"It can be of type: Gerber or Geometry.\n"
"What is selected here will dictate the kind\n"
"of objects that will populate the 'Object' combobox."
msgstr ""
"Specify the type of object to be excepted from isolation.\n"
"It can be of type: Gerber or Geometry.\n"
"What is selected here will dictate the kind\n"
"of objects that will populate the 'Object' combobox."

#: appTools/ToolIsolation.py:3303
msgid "Object whose area will be removed from isolation geometry."
msgstr "Object whose area will be removed from isolation geometry."

#: appTools/ToolIsolation.py:3339 appTools/ToolNCC.py:4211
msgid ""
"The type of FlatCAM object to be used as non copper clearing reference.\n"
"It can be Gerber, Excellon or Geometry."
msgstr ""
"The type of FlatCAM object to be used as non copper clearing reference.\n"
"It can be Gerber, Excellon or Geometry."

#: appTools/ToolIsolation.py:3405
msgid ""
"Create a Geometry object with toolpaths to cut \n"
"isolation outside, inside or on both sides of the\n"
"object. For a Gerber object outside means outside\n"
"of the Gerber feature and inside means inside of\n"
"the Gerber feature, if possible at all. This means\n"
"that only if the Gerber feature has openings inside, they\n"
"will be isolated. If what is wanted is to cut isolation\n"
"inside the actual Gerber feature, use a negative tool\n"
"diameter above."
msgstr ""
"Create a Geometry object with toolpaths to cut \n"
"isolation outside, inside or on both sides of the\n"
"object. For a Gerber object outside means outside\n"
"of the Gerber feature and inside means inside of\n"
"the Gerber feature, if possible at all. This means\n"
"that only if the Gerber feature has openings inside, they\n"
"will be isolated. If what is wanted is to cut isolation\n"
"inside the actual Gerber feature, use a negative tool\n"
"diameter above."

#: appTools/ToolMilling.py:1064
#, fuzzy
#| msgid "Generating Solder Paste dispensing geometry..."
msgid "Generating drills milling geometry..."
msgstr "Generating Solder Paste dispensing geometry..."

#: appTools/ToolMilling.py:1169
#, fuzzy
#| msgid "Generating Solder Paste dispensing geometry..."
msgid "Generating slot milling geometry..."
msgstr "Generating Solder Paste dispensing geometry..."

#: appTools/ToolMilling.py:1584
#, fuzzy
#| msgid "Mill Holes"
msgid "Milling Holes Tool"
msgstr "Mill Holes"

#: appTools/ToolMilling.py:2166
msgid "Preprocessor E"
msgstr "Preprocessor E"

#: appTools/ToolMilling.py:2178
msgid "Preprocessor G"
msgstr "Preprocessor G"

#: appTools/ToolMilling.py:2180
msgid ""
"The preprocessor JSON file that dictates\n"
"Gcode output for Geometry (Milling) Objects."
msgstr ""
"The preprocessor JSON file that dictates\n"
"Gcode output for Geometry (Milling) Objects."

#: appTools/ToolMove.py:102
msgid "MOVE: Click on the Start point ..."
msgstr "MOVE: Click on the Start point ..."

#: appTools/ToolMove.py:113
msgid "Cancelled. No object(s) to move."
msgstr "Cancelled. No object(s) to move."

#: appTools/ToolMove.py:140
msgid "MOVE: Click on the Destination point ..."
msgstr "MOVE: Click on the Destination point ..."

#: appTools/ToolMove.py:163
msgid "Moving..."
msgstr "Moving..."

#: appTools/ToolMove.py:166
msgid "No object(s) selected."
msgstr "No object(s) selected."

#: appTools/ToolMove.py:221
msgid "Error when mouse left click."
msgstr "Error when mouse left click."

#: appTools/ToolNCC.py:1674 appTools/ToolNCC.py:2598
msgid "NCC Tool. Preparing non-copper polygons."
msgstr "NCC Tool. Preparing non-copper polygons."

#: appTools/ToolNCC.py:1734 appTools/ToolNCC.py:2726
msgid "NCC Tool. Calculate 'empty' area."
msgstr "NCC Tool. Calculate 'empty' area."

#: appTools/ToolNCC.py:1745 appTools/ToolNCC.py:1774 appTools/ToolNCC.py:1880
#: appTools/ToolNCC.py:1893 appTools/ToolNCC.py:2739 appTools/ToolNCC.py:2844
#: appTools/ToolNCC.py:2859 appTools/ToolNCC.py:3125 appTools/ToolNCC.py:3226
#: appTools/ToolNCC.py:3241
msgid "Buffering finished"
msgstr "Buffering finished"

#: appTools/ToolNCC.py:1749 appTools/ToolNCC.py:1778 appTools/ToolNCC.py:1884
#: appTools/ToolNCC.py:1896 appTools/ToolNCC.py:2747 appTools/ToolNCC.py:2866
#: appTools/ToolNCC.py:3132 appTools/ToolNCC.py:3248
msgid "Could not get the extent of the area to be non copper cleared."
msgstr "Could not get the extent of the area to be non copper cleared."

#: appTools/ToolNCC.py:1757 appTools/ToolNCC.py:1907 appTools/ToolNCC.py:2877
msgid "NCC Tool. Finished calculation of 'empty' area."
msgstr "NCC Tool. Finished calculation of 'empty' area."

#: appTools/ToolNCC.py:1810 appTools/ToolNCC.py:2774 appTools/ToolNCC.py:2851
#: appTools/ToolNCC.py:3152 appTools/ToolNCC.py:3233
msgid ""
"Isolation geometry is broken. Margin is less than isolation tool diameter."
msgstr ""
"Isolation geometry is broken. Margin is less than isolation tool diameter."

#: appTools/ToolNCC.py:1900 appTools/ToolNCC.py:2870 appTools/ToolNCC.py:3251
msgid "The selected object is not suitable for copper clearing."
msgstr "The selected object is not suitable for copper clearing."

#: appTools/ToolNCC.py:1950
msgid "Clearing the polygon with the method: lines."
msgstr "Clearing the polygon with the method: lines."

#: appTools/ToolNCC.py:1960
msgid "Failed. Clearing the polygon with the method: seed."
msgstr "Failed. Clearing the polygon with the method: seed."

#: appTools/ToolNCC.py:1969
msgid "Failed. Clearing the polygon with the method: standard."
msgstr "Failed. Clearing the polygon with the method: standard."

#: appTools/ToolNCC.py:1985
#, fuzzy
#| msgid "Geometry could not be cleared completely"
msgid "Polygon could not be cleared. Location:"
msgstr "Geometry could not be cleared completely"

#: appTools/ToolNCC.py:2017 appTools/ToolNCC.py:2019 appTools/ToolNCC.py:2547
#: appTools/ToolNCC.py:2549
msgid "Non-Copper clearing ..."
msgstr "Non-Copper clearing ..."

#: appTools/ToolNCC.py:2038
msgid ""
"There is no copper clearing tool in the selection and at least one is needed."
msgstr ""

#: appTools/ToolNCC.py:2053 appTools/ToolNCC.py:2694
msgid ""
"NCC Tool. Finished non-copper polygons. Normal copper clearing task started."
msgstr ""
"NCC Tool. Finished non-copper polygons. Normal copper clearing task started."

#: appTools/ToolNCC.py:2081 appTools/ToolNCC.py:2315
msgid "NCC Tool failed creating bounding box."
msgstr "NCC Tool failed creating bounding box."

#: appTools/ToolNCC.py:2101 appTools/ToolNCC.py:2351 appTools/ToolNCC.py:2890
#: appTools/ToolNCC.py:3276
msgid "NCC Tool clearing with tool diameter"
msgstr "NCC Tool clearing with tool diameter"

#: appTools/ToolNCC.py:2101 appTools/ToolNCC.py:2351 appTools/ToolNCC.py:2890
#: appTools/ToolNCC.py:3276
msgid "started."
msgstr "started."

#: appTools/ToolNCC.py:2229
#, fuzzy
#| msgid "Could not get the extent of the area to be non copper cleared."
msgid "Could not use the tool for copper clear."
msgstr "Could not get the extent of the area to be non copper cleared."

#: appTools/ToolNCC.py:2251 appTools/ToolNCC.py:3051
msgid ""
"There is no NCC Geometry in the file.\n"
"Usually it means that the tool diameter is too big for the painted "
"geometry.\n"
"Change the painting parameters and try again."
msgstr ""
"There is no NCC Geometry in the file.\n"
"Usually it means that the tool diameter is too big for the painted "
"geometry.\n"
"Change the painting parameters and try again."

#: appTools/ToolNCC.py:2261 appTools/ToolNCC.py:3060
msgid "NCC Tool clear all done."
msgstr "NCC Tool clear all done."

#: appTools/ToolNCC.py:2264 appTools/ToolNCC.py:3063
msgid "NCC Tool clear all done but the copper features isolation is broken for"
msgstr ""
"NCC Tool clear all done but the copper features isolation is broken for"

#: appTools/ToolNCC.py:2266 appTools/ToolNCC.py:2462 appTools/ToolNCC.py:3065
#: appTools/ToolNCC.py:3448
msgid "tools"
msgstr "tools"

#: appTools/ToolNCC.py:2293
#, fuzzy
#| msgid "Paint Tool. Rest machining painting area task started."
msgid "NCC Tool. Rest machining copper clearing task started."
msgstr "Paint Tool. Rest machining painting area task started."

#: appTools/ToolNCC.py:2458 appTools/ToolNCC.py:3444
msgid "NCC Tool Rest Machining clear all done."
msgstr "NCC Tool Rest Machining clear all done."

#: appTools/ToolNCC.py:2461 appTools/ToolNCC.py:3447
msgid ""
"NCC Tool Rest Machining clear all done but the copper features isolation is "
"broken for"
msgstr ""
"NCC Tool Rest Machining clear all done but the copper features isolation is "
"broken for"

#: appTools/ToolNCC.py:2559
msgid "NCC Tool started. Reading parameters."
msgstr "NCC Tool started. Reading parameters."

#: appTools/ToolNCC.py:3546
msgid ""
"Try to use the Buffering Type = Full in Preferences -> Gerber General. "
"Reload the Gerber file after this change."
msgstr ""
"Try to use the Buffering Type = Full in Preferences -> Gerber General. "
"Reload the Gerber file after this change."

#: appTools/ToolNCC.py:3702
msgid "Non-Copper Clearing"
msgstr "Non-Copper Clearing"

#: appTools/ToolNCC.py:3731 appTools/ToolPaint.py:2764
msgid "Obj Type"
msgstr "Obj Type"

#: appTools/ToolNCC.py:3733
msgid ""
"Specify the type of object to be cleared of excess copper.\n"
"It can be of type: Gerber or Geometry.\n"
"What is selected here will dictate the kind\n"
"of objects that will populate the 'Object' combobox."
msgstr ""
"Specify the type of object to be cleared of excess copper.\n"
"It can be of type: Gerber or Geometry.\n"
"What is selected here will dictate the kind\n"
"of objects that will populate the 'Object' combobox."

#: appTools/ToolNCC.py:3755
msgid "Object to be cleared of excess copper."
msgstr "Object to be cleared of excess copper."

#: appTools/ToolNCC.py:3783
msgid ""
"This is the Tool Number.\n"
"Non copper clearing will start with the tool with the biggest \n"
"diameter, continuing until there are no more tools.\n"
"Only tools that create NCC clearing geometry will still be present\n"
"in the resulting geometry. This is because with some tools\n"
"this function will not be able to create painting geometry."
msgstr ""
"This is the Tool Number.\n"
"Non copper clearing will start with the tool with the biggest \n"
"diameter, continuing until there are no more tools.\n"
"Only tools that create NCC clearing geometry will still be present\n"
"in the resulting geometry. This is because with some tools\n"
"this function will not be able to create painting geometry."

#: appTools/ToolOptimal.py:142
msgid "Only Gerber objects can be evaluated."
msgstr "Only Gerber objects can be evaluated."

#: appTools/ToolOptimal.py:148
msgid ""
"Optimal Tool. Started to search for the minimum distance between copper "
"features."
msgstr ""
"Optimal Tool. Started to search for the minimum distance between copper "
"features."

#: appTools/ToolOptimal.py:158
msgid "Optimal Tool. Parsing geometry for aperture"
msgstr "Optimal Tool. Parsing geometry for aperture"

#: appTools/ToolOptimal.py:169
msgid "Optimal Tool. Creating a buffer for the object geometry."
msgstr "Optimal Tool. Creating a buffer for the object geometry."

#: appTools/ToolOptimal.py:184
msgid ""
"Optimal Tool. Finding the distances between each two elements. Iterations"
msgstr ""
"Optimal Tool. Finding the distances between each two elements. Iterations"

#: appTools/ToolOptimal.py:218
msgid "Optimal Tool. Finding the minimum distance."
msgstr "Optimal Tool. Finding the minimum distance."

#: appTools/ToolOptimal.py:234
msgid "Optimal Tool. Finished successfully."
msgstr "Optimal Tool. Finished successfully."

#: appTools/ToolOptimal.py:435
msgid "Number of decimals kept for found distances."
msgstr "Number of decimals kept for found distances."

#: appTools/ToolOptimal.py:443
msgid "Minimum distance"
msgstr "Minimum distance"

#: appTools/ToolOptimal.py:444
msgid "Display minimum distance between copper features."
msgstr "Display minimum distance between copper features."

#: appTools/ToolOptimal.py:448
msgid "Determined"
msgstr "Determined"

#: appTools/ToolOptimal.py:462
msgid "Occurring"
msgstr "Occurring"

#: appTools/ToolOptimal.py:463
msgid "How many times this minimum is found."
msgstr "How many times this minimum is found."

#: appTools/ToolOptimal.py:469
msgid "Minimum points coordinates"
msgstr "Minimum points coordinates"

#: appTools/ToolOptimal.py:470 appTools/ToolOptimal.py:476
msgid "Coordinates for points where minimum distance was found."
msgstr "Coordinates for points where minimum distance was found."

#: appTools/ToolOptimal.py:489 appTools/ToolOptimal.py:565
msgid "Jump to selected position"
msgstr "Jump to selected position"

#: appTools/ToolOptimal.py:491 appTools/ToolOptimal.py:567
msgid ""
"Select a position in the Locations text box and then\n"
"click this button."
msgstr ""
"Select a position in the Locations text box and then\n"
"click this button."

#: appTools/ToolOptimal.py:499
msgid "Other distances"
msgstr "Other distances"

#: appTools/ToolOptimal.py:500
msgid ""
"Will display other distances in the Gerber file ordered from\n"
"the minimum to the maximum, not including the absolute minimum."
msgstr ""
"Will display other distances in the Gerber file ordered from\n"
"the minimum to the maximum, not including the absolute minimum."

#: appTools/ToolOptimal.py:505
msgid "Other distances points coordinates"
msgstr "Other distances points coordinates"

#: appTools/ToolOptimal.py:506 appTools/ToolOptimal.py:520
#: appTools/ToolOptimal.py:527 appTools/ToolOptimal.py:544
#: appTools/ToolOptimal.py:551
msgid ""
"Other distances and the coordinates for points\n"
"where the distance was found."
msgstr ""
"Other distances and the coordinates for points\n"
"where the distance was found."

#: appTools/ToolOptimal.py:519
msgid "Gerber distances"
msgstr "Gerber distances"

#: appTools/ToolOptimal.py:543
msgid "Points coordinates"
msgstr "Points coordinates"

#: appTools/ToolOptimal.py:575
msgid "Find Minimum"
msgstr "Find Minimum"

#: appTools/ToolOptimal.py:577
msgid ""
"Calculate the minimum distance between copper features,\n"
"this will allow the determination of the right tool to\n"
"use for isolation or copper clearing."
msgstr ""
"Calculate the minimum distance between copper features,\n"
"this will allow the determination of the right tool to\n"
"use for isolation or copper clearing."

#: appTools/ToolPDF.py:91 appTools/ToolPDF.py:95
msgid "Open PDF"
msgstr "Open PDF"

#: appTools/ToolPDF.py:98
msgid "Open PDF cancelled"
msgstr "Open PDF cancelled"

#: appTools/ToolPDF.py:122
msgid "Parsing PDF file ..."
msgstr "Parsing PDF file ..."

#: appTools/ToolPDF.py:138 app_Main.py:9128
msgid "Failed to open"
msgstr "Failed to open"

#: appTools/ToolPDF.py:203 appTools/ToolPcbWizard.py:331 app_Main.py:9077
msgid "No geometry found in file"
msgstr "No geometry found in file"

#: appTools/ToolPDF.py:206 appTools/ToolPDF.py:279
#, python-format
msgid "Rendering PDF layer #%d ..."
msgstr "Rendering PDF layer #%d ..."

#: appTools/ToolPDF.py:210 appTools/ToolPDF.py:283
msgid "Open PDF file failed."
msgstr "Open PDF file failed."

#: appTools/ToolPDF.py:215 appTools/ToolPDF.py:288
msgid "Rendered"
msgstr "Rendered"

#: appTools/ToolPaint.py:998
#, python-format
msgid "Could not retrieve object: %s"
msgstr "Could not retrieve object: %s"

#: appTools/ToolPaint.py:1008
msgid "Can't do Paint on MultiGeo geometries"
msgstr "Can't do Paint on MultiGeo geometries"

#: appTools/ToolPaint.py:1045
msgid "Click on a polygon to paint it."
msgstr "Click on a polygon to paint it."

#: appTools/ToolPaint.py:1061
msgid "Click the start point of the paint area."
msgstr "Click the start point of the paint area."

#: appTools/ToolPaint.py:1127
msgid "Click to add next polygon or right click to start painting."
msgstr "Click to add next polygon or right click to start painting."

#: appTools/ToolPaint.py:1140
msgid "Click to add/remove next polygon or right click to start painting."
msgstr "Click to add/remove next polygon or right click to start painting."

#: appTools/ToolPaint.py:1650
msgid "Painting polygon with method: lines."
msgstr "Painting polygon with method: lines."

#: appTools/ToolPaint.py:1662
msgid "Failed. Painting polygon with method: seed."
msgstr "Failed. Painting polygon with method: seed."

#: appTools/ToolPaint.py:1673
msgid "Failed. Painting polygon with method: standard."
msgstr "Failed. Painting polygon with method: standard."

#: appTools/ToolPaint.py:1689
msgid "Geometry could not be painted completely"
msgstr "Geometry could not be painted completely"

#: appTools/ToolPaint.py:1763 appTools/ToolPaint.py:1950
msgid "Painting with tool diameter = "
msgstr "Painting with tool diameter = "

#: appTools/ToolPaint.py:1766 appTools/ToolPaint.py:1953
msgid "started"
msgstr "started"

#: appTools/ToolPaint.py:1792 appTools/ToolPaint.py:1940
msgid "Margin parameter too big. Tool is not used"
msgstr "Margin parameter too big. Tool is not used"

#: appTools/ToolPaint.py:1852 appTools/ToolPaint.py:2061
msgid ""
"Could not do Paint. Try a different combination of parameters. Or a "
"different strategy of paint"
msgstr ""
"Could not do Paint. Try a different combination of parameters. Or a "
"different strategy of paint"

#: appTools/ToolPaint.py:1907 appTools/ToolPaint.py:2132
msgid ""
"There is no Painting Geometry in the file.\n"
"Usually it means that the tool diameter is too big for the painted "
"geometry.\n"
"Change the painting parameters and try again."
msgstr ""
"There is no Painting Geometry in the file.\n"
"Usually it means that the tool diameter is too big for the painted "
"geometry.\n"
"Change the painting parameters and try again."

#: appTools/ToolPaint.py:2175
#, fuzzy
#| msgid "Paint All failed."
msgid "Paint failed."
msgstr "Paint All failed."

#: appTools/ToolPaint.py:2181
#, fuzzy
#| msgid "Paint done."
msgid "Paint Done."
msgstr "Paint done."

#: appTools/ToolPaint.py:2186
#, fuzzy
#| msgid "Painting polygon..."
msgid "Painting..."
msgstr "Painting polygon..."

#: appTools/ToolPaint.py:2220 appTools/ToolPaint.py:2225
#: appTools/ToolPaint.py:2233 appTools/ToolPaint.py:2320
#: appTools/ToolPaint.py:2323 appTools/ToolPaint.py:2331
#: appTools/ToolPaint.py:2401 appTools/ToolPaint.py:2406
#: appTools/ToolPaint.py:2412
msgid "Paint Tool."
msgstr "Paint Tool."

#: appTools/ToolPaint.py:2221 appTools/ToolPaint.py:2225
#: appTools/ToolPaint.py:2233
msgid "Normal painting polygon task started."
msgstr "Normal painting polygon task started."

#: appTools/ToolPaint.py:2222 appTools/ToolPaint.py:2320
#: appTools/ToolPaint.py:2403
msgid "Buffering geometry..."
msgstr "Buffering geometry..."

#: appTools/ToolPaint.py:2245 appTools/ToolPaint.py:2338
#: appTools/ToolPaint.py:2420
msgid "No polygon found."
msgstr "No polygon found."

#: appTools/ToolPaint.py:2320 appTools/ToolPaint.py:2323
#: appTools/ToolPaint.py:2331
msgid "Paint all polygons task started."
msgstr "Paint all polygons task started."

#: appTools/ToolPaint.py:2402 appTools/ToolPaint.py:2406
#: appTools/ToolPaint.py:2412
msgid "Painting area task started."
msgstr "Painting area task started."

#: appTools/ToolPaint.py:2766
msgid ""
"Specify the type of object to be painted.\n"
"It can be of type: Gerber or Geometry.\n"
"What is selected here will dictate the kind\n"
"of objects that will populate the 'Object' combobox."
msgstr ""
"Specify the type of object to be painted.\n"
"It can be of type: Gerber or Geometry.\n"
"What is selected here will dictate the kind\n"
"of objects that will populate the 'Object' combobox."

#: appTools/ToolPaint.py:2788
msgid "Object to be painted."
msgstr "Object to be painted."

#: appTools/ToolPaint.py:2801
msgid ""
"Tools pool from which the algorithm\n"
"will pick the ones used for painting."
msgstr ""
"Tools pool from which the algorithm\n"
"will pick the ones used for painting."

#: appTools/ToolPaint.py:2818
msgid ""
"This is the Tool Number.\n"
"Painting will start with the tool with the biggest diameter,\n"
"continuing until there are no more tools.\n"
"Only tools that create painting geometry will still be present\n"
"in the resulting geometry. This is because with some tools\n"
"this function will not be able to create painting geometry."
msgstr ""
"This is the Tool Number.\n"
"Painting will start with the tool with the biggest diameter,\n"
"continuing until there are no more tools.\n"
"Only tools that create painting geometry will still be present\n"
"in the resulting geometry. This is because with some tools\n"
"this function will not be able to create painting geometry."

#: appTools/ToolPaint.py:2830
msgid ""
"The Tool Type (TT) can be:\n"
"- Circular -> it is informative only. Being circular,\n"
"the cut width in material is exactly the tool diameter.\n"
"- Ball -> informative only and make reference to the Ball type endmill.\n"
"- V-Shape -> it will disable Z-Cut parameter in the resulting geometry UI "
"form\n"
"and enable two additional UI form fields in the resulting geometry: V-Tip "
"Dia and\n"
"V-Tip Angle. Adjusting those two values will adjust the Z-Cut parameter "
"such\n"
"as the cut width into material will be equal with the value in the Tool "
"Diameter\n"
"column of this table.\n"
"Choosing the 'V-Shape' Tool Type automatically will select the Operation "
"Type\n"
"in the resulting geometry as Isolation."
msgstr ""
"The Tool Type (TT) can be:\n"
"- Circular -> it is informative only. Being circular,\n"
"the cut width in material is exactly the tool diameter.\n"
"- Ball -> informative only and make reference to the Ball type endmill.\n"
"- V-Shape -> it will disable Z-Cut parameter in the resulting geometry UI "
"form\n"
"and enable two additional UI form fields in the resulting geometry: V-Tip "
"Dia and\n"
"V-Tip Angle. Adjusting those two values will adjust the Z-Cut parameter "
"such\n"
"as the cut width into material will be equal with the value in the Tool "
"Diameter\n"
"column of this table.\n"
"Choosing the 'V-Shape' Tool Type automatically will select the Operation "
"Type\n"
"in the resulting geometry as Isolation."

#: appTools/ToolPaint.py:3138
msgid ""
"The type of FlatCAM object to be used as paint reference.\n"
"It can be Gerber, Excellon or Geometry."
msgstr ""
"The type of FlatCAM object to be used as paint reference.\n"
"It can be Gerber, Excellon or Geometry."

#: appTools/ToolPaint.py:3180
#, fuzzy
#| msgid ""
#| "Create a Geometry object with\n"
#| "toolpaths to cut around polygons."
msgid "Create a Geometry Object which paints the polygons."
msgstr ""
"Create a Geometry object with\n"
"toolpaths to cut around polygons."

#: appTools/ToolPanelize.py:89
msgid "Panel. Tool"
msgstr "Panel. Tool"

#: appTools/ToolPanelize.py:236
msgid "Columns or Rows are zero value. Change them to a positive integer."
msgstr "Columns or Rows are zero value. Change them to a positive integer."

#: appTools/ToolPanelize.py:275
msgid "Generating panel ... "
msgstr "Generating panel ... "

#: appTools/ToolPanelize.py:362 appTools/ToolPanelize.py:584
#, fuzzy
#| msgid "Generating panel ... Adding the Gerber code."
msgid "Generating panel ... Adding the source code."
msgstr "Generating panel ... Adding the Gerber code."

#: appTools/ToolPanelize.py:550
msgid "Optimizing the overlapping paths."
msgstr ""

#: appTools/ToolPanelize.py:582
#, fuzzy
#| msgid "Optimization Time"
msgid "Optimization complete."
msgstr "Optimization Time"

#: appTools/ToolPanelize.py:596
msgid "Generating panel... Spawning copies"
msgstr "Generating panel... Spawning copies"

#: appTools/ToolPanelize.py:605
msgid "Panel done..."
msgstr "Panel done..."

#: appTools/ToolPanelize.py:608
#, python-brace-format
msgid ""
"{text} Too big for the constrain area. Final panel has {col} columns and "
"{row} rows"
msgstr ""
"{text} Too big for the constrain area. Final panel has {col} columns and "
"{row} rows"

#: appTools/ToolPanelize.py:617
msgid "Panel created successfully."
msgstr "Panel created successfully."

#: appTools/ToolPanelize.py:654
msgid ""
"Specify the type of object to be panelized\n"
"It can be of type: Gerber, Excellon or Geometry.\n"
"The selection here decide the type of objects that will be\n"
"in the Object combobox."
msgstr ""
"Specify the type of object to be panelized\n"
"It can be of type: Gerber, Excellon or Geometry.\n"
"The selection here decide the type of objects that will be\n"
"in the Object combobox."

#: appTools/ToolPanelize.py:687
msgid ""
"Object to be panelized. This means that it will\n"
"be duplicated in an array of rows and columns."
msgstr ""
"Object to be panelized. This means that it will\n"
"be duplicated in an array of rows and columns."

#: appTools/ToolPanelize.py:699
msgid "Penelization Reference"
msgstr "Penelization Reference"

#: appTools/ToolPanelize.py:701
msgid ""
"Choose the reference for panelization:\n"
"- Object = the bounding box of a different object\n"
"- Bounding Box = the bounding box of the object to be panelized\n"
"\n"
"The reference is useful when doing panelization for more than one\n"
"object. The spacings (really offsets) will be applied in reference\n"
"to this reference object therefore maintaining the panelized\n"
"objects in sync."
msgstr ""
"Choose the reference for panelization:\n"
"- Object = the bounding box of a different object\n"
"- Bounding Box = the bounding box of the object to be panelized\n"
"\n"
"The reference is useful when doing panelization for more than one\n"
"object. The spacings (really offsets) will be applied in reference\n"
"to this reference object therefore maintaining the panelized\n"
"objects in sync."

#: appTools/ToolPanelize.py:722
msgid "Box Type"
msgstr "Box Type"

#: appTools/ToolPanelize.py:724
msgid ""
"Specify the type of object to be used as an container for\n"
"panelization. It can be: Gerber or Geometry type.\n"
"The selection here decide the type of objects that will be\n"
"in the Box Object combobox."
msgstr ""
"Specify the type of object to be used as an container for\n"
"panelization. It can be: Gerber or Geometry type.\n"
"The selection here decide the type of objects that will be\n"
"in the Box Object combobox."

#: appTools/ToolPanelize.py:738
msgid ""
"The actual object that is used as container for the\n"
" selected object that is to be panelized."
msgstr ""
"The actual object that is used as container for the\n"
" selected object that is to be panelized."

#: appTools/ToolPanelize.py:748
msgid "Panel Data"
msgstr "Panel Data"

#: appTools/ToolPanelize.py:750
msgid ""
"This informations will shape the resulting panel.\n"
"The number of rows and columns will set how many\n"
"duplicates of the original geometry will be generated.\n"
"\n"
"The spacings will set the distance between any two\n"
"elements of the panel array."
msgstr ""
"This informations will shape the resulting panel.\n"
"The number of rows and columns will set how many\n"
"duplicates of the original geometry will be generated.\n"
"\n"
"The spacings will set the distance between any two\n"
"elements of the panel array."

#: appTools/ToolPanelize.py:813
msgid ""
"Choose the type of object for the panel object:\n"
"- Geometry\n"
"- Gerber"
msgstr ""
"Choose the type of object for the panel object:\n"
"- Geometry\n"
"- Gerber"

#: appTools/ToolPanelize.py:831
msgid "Constrain panel within"
msgstr "Constrain panel within"

#: appTools/ToolPanelize.py:872
msgid "Panelize Object"
msgstr "Panelize Object"

#: appTools/ToolPanelize.py:874 appTools/ToolRulesCheck.py:1603
msgid ""
"Panelize the specified object around the specified box.\n"
"In other words it creates multiple copies of the source object,\n"
"arranged in a 2D array of rows and columns."
msgstr ""
"Panelize the specified object around the specified box.\n"
"In other words it creates multiple copies of the source object,\n"
"arranged in a 2D array of rows and columns."

#: appTools/ToolPcbWizard.py:93
msgid "PCBWizard Tool"
msgstr "PCBWizard Tool"

#: appTools/ToolPcbWizard.py:179 appTools/ToolPcbWizard.py:183
msgid "Load PcbWizard Excellon file"
msgstr "Load PcbWizard Excellon file"

#: appTools/ToolPcbWizard.py:202 appTools/ToolPcbWizard.py:206
msgid "Load PcbWizard INF file"
msgstr "Load PcbWizard INF file"

#: appTools/ToolPcbWizard.py:254
msgid ""
"The INF file does not contain the tool table.\n"
"Try to open the Excellon file from File -> Open -> Excellon\n"
"and edit the drill diameters manually."
msgstr ""
"The INF file does not contain the tool table.\n"
"Try to open the Excellon file from File -> Open -> Excellon\n"
"and edit the drill diameters manually."

#: appTools/ToolPcbWizard.py:274
msgid "PcbWizard .INF file loaded."
msgstr "PcbWizard .INF file loaded."

#: appTools/ToolPcbWizard.py:278
msgid "Main PcbWizard Excellon file loaded."
msgstr "Main PcbWizard Excellon file loaded."

#: appTools/ToolPcbWizard.py:310 app_Main.py:9057
msgid "This is not Excellon file."
msgstr "This is not Excellon file."

#: appTools/ToolPcbWizard.py:313
msgid "Cannot parse file"
msgstr "Cannot parse file"

#: appTools/ToolPcbWizard.py:336
msgid "Importing Excellon."
msgstr "Importing Excellon."

#: appTools/ToolPcbWizard.py:343
msgid "Import Excellon file failed."
msgstr "Import Excellon file failed."

#: appTools/ToolPcbWizard.py:350
msgid "Imported"
msgstr "Imported"

#: appTools/ToolPcbWizard.py:353
msgid "Excellon merging is in progress. Please wait..."
msgstr "Excellon merging is in progress. Please wait..."

#: appTools/ToolPcbWizard.py:355
msgid "The imported Excellon file is empty."
msgstr "The imported Excellon file is empty."

#: appTools/ToolPcbWizard.py:360
msgid "PcbWizard Import Tool"
msgstr "PcbWizard Import Tool"

#: appTools/ToolPcbWizard.py:379
msgid "Load files"
msgstr "Load files"

#: appTools/ToolPcbWizard.py:385
msgid "Excellon file"
msgstr "Excellon file"

#: appTools/ToolPcbWizard.py:387
msgid ""
"Load the Excellon file.\n"
"Usually it has a .DRL extension"
msgstr ""
"Load the Excellon file.\n"
"Usually it has a .DRL extension"

#: appTools/ToolPcbWizard.py:393
msgid "INF file"
msgstr "INF file"

#: appTools/ToolPcbWizard.py:395
msgid "Load the INF file."
msgstr "Load the INF file."

#: appTools/ToolPcbWizard.py:407
msgid "Tool Number"
msgstr "Tool Number"

#: appTools/ToolPcbWizard.py:409
msgid "Tool diameter in file units."
msgstr "Tool diameter in file units."

#: appTools/ToolPcbWizard.py:415
msgid "Excellon format"
msgstr "Excellon format"

#: appTools/ToolPcbWizard.py:423
msgid "Int. digits"
msgstr "Int. digits"

#: appTools/ToolPcbWizard.py:425
msgid "The number of digits for the integral part of the coordinates."
msgstr "The number of digits for the integral part of the coordinates."

#: appTools/ToolPcbWizard.py:432
msgid "Frac. digits"
msgstr "Frac. digits"

#: appTools/ToolPcbWizard.py:434
msgid "The number of digits for the fractional part of the coordinates."
msgstr "The number of digits for the fractional part of the coordinates."

#: appTools/ToolPcbWizard.py:441
msgid "No Suppression"
msgstr "No Suppression"

#: appTools/ToolPcbWizard.py:442
msgid "Zeros supp."
msgstr "Zeros supp."

#: appTools/ToolPcbWizard.py:444
msgid ""
"The type of zeros suppression used.\n"
"Can be of type:\n"
"- LZ = leading zeros are kept\n"
"- TZ = trailing zeros are kept\n"
"- No Suppression = no zero suppression"
msgstr ""
"The type of zeros suppression used.\n"
"Can be of type:\n"
"- LZ = leading zeros are kept\n"
"- TZ = trailing zeros are kept\n"
"- No Suppression = no zero suppression"

#: appTools/ToolPcbWizard.py:457
msgid ""
"The type of units that the coordinates and tool\n"
"diameters are using. Can be INCH or MM."
msgstr ""
"The type of units that the coordinates and tool\n"
"diameters are using. Can be INCH or MM."

#: appTools/ToolPcbWizard.py:464
msgid "Import Excellon"
msgstr "Import Excellon"

#: appTools/ToolPcbWizard.py:466
msgid ""
"Import in FlatCAM an Excellon file\n"
"that store it's information's in 2 files.\n"
"One usually has .DRL extension while\n"
"the other has .INF extension."
msgstr ""
"Import in FlatCAM an Excellon file\n"
"that store it's information's in 2 files.\n"
"One usually has .DRL extension while\n"
"the other has .INF extension."

#: appTools/ToolProperties.py:116 appTools/ToolTransform.py:142
#: app_Main.py:4970 app_Main.py:7315 app_Main.py:7415 app_Main.py:7456
#: app_Main.py:7497 app_Main.py:7539 app_Main.py:7581 app_Main.py:7625
#: app_Main.py:7669 app_Main.py:8185 app_Main.py:8189
msgid "No object selected."
msgstr "No object selected."

#: appTools/ToolProperties.py:131
msgid "Object Properties are displayed."
msgstr "Object Properties are displayed."

#: appTools/ToolProperties.py:136
msgid "Properties Tool"
msgstr "Properties Tool"

#: appTools/ToolProperties.py:153
msgid "TYPE"
msgstr "TYPE"

#: appTools/ToolProperties.py:154
msgid "NAME"
msgstr "NAME"

#: appTools/ToolProperties.py:156
msgid "Dimensions"
msgstr "Dimensions"

#: appTools/ToolProperties.py:184
msgid "Geo Type"
msgstr "Geo Type"

#: appTools/ToolProperties.py:187
msgid "Single-Geo"
msgstr "Single-Geo"

#: appTools/ToolProperties.py:188
msgid "Multi-Geo"
msgstr "Multi-Geo"

#: appTools/ToolProperties.py:199
msgid "Calculating dimensions ... Please wait."
msgstr "Calculating dimensions ... Please wait."

#: appTools/ToolProperties.py:342 appTools/ToolProperties.py:346
#: appTools/ToolProperties.py:348
msgid "Inch"
msgstr "Inch"

#: appTools/ToolProperties.py:342 appTools/ToolProperties.py:347
#: appTools/ToolProperties.py:349
msgid "Metric"
msgstr "Metric"

#: appTools/ToolProperties.py:422 appTools/ToolProperties.py:490
msgid "Drills number"
msgstr "Drills number"

#: appTools/ToolProperties.py:423 appTools/ToolProperties.py:492
msgid "Slots number"
msgstr "Slots number"

#: appTools/ToolProperties.py:425
msgid "Drills total number:"
msgstr "Drills total number:"

#: appTools/ToolProperties.py:426
msgid "Slots total number:"
msgstr "Slots total number:"

#: appTools/ToolProperties.py:453 appTools/ToolProperties.py:456
#: appTools/ToolProperties.py:459 appTools/ToolProperties.py:487
#: appTools/ToolProperties.py:494 appTools/ToolProperties.py:497
msgid "Present"
msgstr "Present"

#: appTools/ToolProperties.py:454 appTools/ToolProperties.py:488
msgid "Solid Geometry"
msgstr "Solid Geometry"

#: appTools/ToolProperties.py:457 appTools/ToolProperties.py:495
msgid "GCode Text"
msgstr "GCode Text"

#: appTools/ToolProperties.py:460 appTools/ToolProperties.py:498
msgid "GCode Geometry"
msgstr "GCode Geometry"

#: appTools/ToolProperties.py:468 appTools/ToolProperties.py:541
#, fuzzy
#| msgid "Tool Dia"
msgid "Tool Data"
msgstr "Tool Dia"

#: appTools/ToolProperties.py:505
msgid "Depth of Cut"
msgstr "Depth of Cut"

#: appTools/ToolProperties.py:517
msgid "Clearance Height"
msgstr "Clearance Height"

#: appTools/ToolProperties.py:555
msgid "Routing time"
msgstr "Routing time"

#: appTools/ToolProperties.py:580
msgid "Width"
msgstr "Width"

#: appTools/ToolProperties.py:586 appTools/ToolProperties.py:594
msgid "Box Area"
msgstr "Box Area"

#: appTools/ToolProperties.py:589 appTools/ToolProperties.py:597
msgid "Convex_Hull Area"
msgstr "Convex_Hull Area"

#: appTools/ToolProperties.py:604 appTools/ToolProperties.py:607
msgid "Copper Area"
msgstr "Copper Area"

#: appTools/ToolPunchGerber.py:101
msgid "Punch Tool"
msgstr "Punch Tool"

#: appTools/ToolPunchGerber.py:275
msgid "The value of the fixed diameter is 0.0. Aborting."
msgstr "The value of the fixed diameter is 0.0. Aborting."

#: appTools/ToolPunchGerber.py:278
msgid ""
"Could not generate punched hole Gerber because the punch hole size is bigger "
"than some of the apertures in the Gerber object."
msgstr ""
"Could not generate punched hole Gerber because the punch hole size is bigger "
"than some of the apertures in the Gerber object."

#: appTools/ToolPunchGerber.py:341
msgid ""
"Could not generate punched hole Gerber because the newly created object "
"geometry is the same as the one in the source object geometry..."
msgstr ""
"Could not generate punched hole Gerber because the newly created object "
"geometry is the same as the one in the source object geometry..."

#: appTools/ToolPunchGerber.py:684 appTools/ToolPunchGerber.py:977
msgid "Punch Gerber"
msgstr "Punch Gerber"

#: appTools/ToolPunchGerber.py:719
msgid "Gerber into which to punch holes"
msgstr "Gerber into which to punch holes"

#: appTools/ToolPunchGerber.py:739
msgid "ALL"
msgstr "ALL"

#: appTools/ToolPunchGerber.py:820
msgid ""
"Remove the geometry of Excellon from the Gerber to create the holes in pads."
msgstr ""
"Remove the geometry of Excellon from the Gerber to create the holes in pads."

#: appTools/ToolPunchGerber.py:979
msgid ""
"Create a Gerber object from the selected object, within\n"
"the specified box."
msgstr ""
"Create a Gerber object from the selected object, within\n"
"the specified box."

#: appTools/ToolQRCode.py:147 appTools/ToolQRCode.py:486
#: appTools/ToolQRCode.py:535
msgid "Cancelled. There is no QRCode Data in the text box."
msgstr "Cancelled. There is no QRCode Data in the text box."

#: appTools/ToolQRCode.py:166
msgid "Generating QRCode geometry"
msgstr "Generating QRCode geometry"

#: appTools/ToolQRCode.py:206
msgid "Click on the Destination point ..."
msgstr "Click on the Destination point ..."

#: appTools/ToolQRCode.py:321
msgid "QRCode Tool done."
msgstr "QRCode Tool done."

#: appTools/ToolQRCode.py:518 appTools/ToolQRCode.py:522
msgid "Export PNG"
msgstr "Export PNG"

#: appTools/ToolQRCode.py:565 appTools/ToolQRCode.py:569 app_Main.py:7347
#: app_Main.py:7351
msgid "Export SVG"
msgstr "Export SVG"

#: appTools/ToolQRCode.py:662
msgid "Gerber Object to which the QRCode will be added."
msgstr "Gerber Object to which the QRCode will be added."

#: appTools/ToolQRCode.py:698
msgid "The parameters used to shape the QRCode."
msgstr "The parameters used to shape the QRCode."

#: appTools/ToolQRCode.py:798
msgid "Export QRCode"
msgstr "Export QRCode"

#: appTools/ToolQRCode.py:800
msgid ""
"Show a set of controls allowing to export the QRCode\n"
"to a SVG file or an PNG file."
msgstr ""
"Show a set of controls allowing to export the QRCode\n"
"to a SVG file or an PNG file."

#: appTools/ToolQRCode.py:839
msgid "Transparent back color"
msgstr "Transparent back color"

#: appTools/ToolQRCode.py:864
msgid "Export QRCode SVG"
msgstr "Export QRCode SVG"

#: appTools/ToolQRCode.py:866
msgid "Export a SVG file with the QRCode content."
msgstr "Export a SVG file with the QRCode content."

#: appTools/ToolQRCode.py:877
msgid "Export QRCode PNG"
msgstr "Export QRCode PNG"

#: appTools/ToolQRCode.py:879
msgid "Export a PNG image file with the QRCode content."
msgstr "Export a PNG image file with the QRCode content."

#: appTools/ToolQRCode.py:890
msgid "Insert QRCode"
msgstr "Insert QRCode"

#: appTools/ToolQRCode.py:892
msgid "Create the QRCode object."
msgstr "Create the QRCode object."

#: appTools/ToolRulesCheck.py:657 appTools/ToolRulesCheck.py:717
#: appTools/ToolRulesCheck.py:754 appTools/ToolRulesCheck.py:826
#: appTools/ToolRulesCheck.py:880 appTools/ToolRulesCheck.py:918
#: appTools/ToolRulesCheck.py:983
msgid "Value is not valid."
msgstr "Value is not valid."

#: appTools/ToolRulesCheck.py:671
msgid "TOP -> Copper to Copper clearance"
msgstr "TOP -> Copper to Copper clearance"

#: appTools/ToolRulesCheck.py:682
msgid "BOTTOM -> Copper to Copper clearance"
msgstr "BOTTOM -> Copper to Copper clearance"

#: appTools/ToolRulesCheck.py:687 appTools/ToolRulesCheck.py:781
#: appTools/ToolRulesCheck.py:945
msgid ""
"At least one Gerber object has to be selected for this rule but none is "
"selected."
msgstr ""
"At least one Gerber object has to be selected for this rule but none is "
"selected."

#: appTools/ToolRulesCheck.py:723
msgid ""
"One of the copper Gerber objects or the Outline Gerber object is not valid."
msgstr ""
"One of the copper Gerber objects or the Outline Gerber object is not valid."

#: appTools/ToolRulesCheck.py:736 appTools/ToolRulesCheck.py:900
msgid ""
"Outline Gerber object presence is mandatory for this rule but it is not "
"selected."
msgstr ""
"Outline Gerber object presence is mandatory for this rule but it is not "
"selected."

#: appTools/ToolRulesCheck.py:753 appTools/ToolRulesCheck.py:780
msgid "Silk to Silk clearance"
msgstr "Silk to Silk clearance"

#: appTools/ToolRulesCheck.py:766
msgid "TOP -> Silk to Silk clearance"
msgstr "TOP -> Silk to Silk clearance"

#: appTools/ToolRulesCheck.py:776
msgid "BOTTOM -> Silk to Silk clearance"
msgstr "BOTTOM -> Silk to Silk clearance"

#: appTools/ToolRulesCheck.py:832
msgid "One or more of the Gerber objects is not valid."
msgstr "One or more of the Gerber objects is not valid."

#: appTools/ToolRulesCheck.py:840
msgid "TOP -> Silk to Solder Mask Clearance"
msgstr "TOP -> Silk to Solder Mask Clearance"

#: appTools/ToolRulesCheck.py:846
msgid "BOTTOM -> Silk to Solder Mask Clearance"
msgstr "BOTTOM -> Silk to Solder Mask Clearance"

#: appTools/ToolRulesCheck.py:850
msgid ""
"Both Silk and Solder Mask Gerber objects has to be either both Top or both "
"Bottom."
msgstr ""
"Both Silk and Solder Mask Gerber objects has to be either both Top or both "
"Bottom."

#: appTools/ToolRulesCheck.py:886
msgid ""
"One of the Silk Gerber objects or the Outline Gerber object is not valid."
msgstr ""
"One of the Silk Gerber objects or the Outline Gerber object is not valid."

#: appTools/ToolRulesCheck.py:930
msgid "TOP -> Minimum Solder Mask Sliver"
msgstr "TOP -> Minimum Solder Mask Sliver"

#: appTools/ToolRulesCheck.py:940
msgid "BOTTOM -> Minimum Solder Mask Sliver"
msgstr "BOTTOM -> Minimum Solder Mask Sliver"

#: appTools/ToolRulesCheck.py:989
msgid "One of the Copper Gerber objects or the Excellon objects is not valid."
msgstr "One of the Copper Gerber objects or the Excellon objects is not valid."

#: appTools/ToolRulesCheck.py:1005
msgid ""
"Excellon object presence is mandatory for this rule but none is selected."
msgstr ""
"Excellon object presence is mandatory for this rule but none is selected."

#: appTools/ToolRulesCheck.py:1078 appTools/ToolRulesCheck.py:1091
#: appTools/ToolRulesCheck.py:1102 appTools/ToolRulesCheck.py:1115
msgid "STATUS"
msgstr "STATUS"

#: appTools/ToolRulesCheck.py:1081 appTools/ToolRulesCheck.py:1105
msgid "FAILED"
msgstr "FAILED"

#: appTools/ToolRulesCheck.py:1094 appTools/ToolRulesCheck.py:1118
msgid "PASSED"
msgstr "PASSED"

#: appTools/ToolRulesCheck.py:1095 appTools/ToolRulesCheck.py:1119
msgid "Violations: There are no violations for the current rule."
msgstr "Violations: There are no violations for the current rule."

#: appTools/ToolRulesCheck.py:1137
msgid "Check Rules"
msgstr "Check Rules"

#: appTools/ToolRulesCheck.py:1165
msgid "Gerber objects for which to check rules."
msgstr "Gerber objects for which to check rules."

#: appTools/ToolRulesCheck.py:1180
msgid "Top"
msgstr "Top"

#: appTools/ToolRulesCheck.py:1182
msgid "The Top Gerber Copper object for which rules are checked."
msgstr "The Top Gerber Copper object for which rules are checked."

#: appTools/ToolRulesCheck.py:1198
msgid "Bottom"
msgstr "Bottom"

#: appTools/ToolRulesCheck.py:1200
msgid "The Bottom Gerber Copper object for which rules are checked."
msgstr "The Bottom Gerber Copper object for which rules are checked."

#: appTools/ToolRulesCheck.py:1216
msgid "SM Top"
msgstr "SM Top"

#: appTools/ToolRulesCheck.py:1218
msgid "The Top Gerber Solder Mask object for which rules are checked."
msgstr "The Top Gerber Solder Mask object for which rules are checked."

#: appTools/ToolRulesCheck.py:1234
msgid "SM Bottom"
msgstr "SM Bottom"

#: appTools/ToolRulesCheck.py:1236
msgid "The Bottom Gerber Solder Mask object for which rules are checked."
msgstr "The Bottom Gerber Solder Mask object for which rules are checked."

#: appTools/ToolRulesCheck.py:1252
msgid "Silk Top"
msgstr "Silk Top"

#: appTools/ToolRulesCheck.py:1254
msgid "The Top Gerber Silkscreen object for which rules are checked."
msgstr "The Top Gerber Silkscreen object for which rules are checked."

#: appTools/ToolRulesCheck.py:1270
msgid "Silk Bottom"
msgstr "Silk Bottom"

#: appTools/ToolRulesCheck.py:1272
msgid "The Bottom Gerber Silkscreen object for which rules are checked."
msgstr "The Bottom Gerber Silkscreen object for which rules are checked."

#: appTools/ToolRulesCheck.py:1290
msgid "The Gerber Outline (Cutout) object for which rules are checked."
msgstr "The Gerber Outline (Cutout) object for which rules are checked."

#: appTools/ToolRulesCheck.py:1303
msgid "Excellon objects for which to check rules."
msgstr "Excellon objects for which to check rules."

#: appTools/ToolRulesCheck.py:1315
msgid "Excellon 1"
msgstr "Excellon 1"

#: appTools/ToolRulesCheck.py:1317
msgid ""
"Excellon object for which to check rules.\n"
"Holds the plated holes or a general Excellon file content."
msgstr ""
"Excellon object for which to check rules.\n"
"Holds the plated holes or a general Excellon file content."

#: appTools/ToolRulesCheck.py:1334
msgid "Excellon 2"
msgstr "Excellon 2"

#: appTools/ToolRulesCheck.py:1336
msgid ""
"Excellon object for which to check rules.\n"
"Holds the non-plated holes."
msgstr ""
"Excellon object for which to check rules.\n"
"Holds the non-plated holes."

#: appTools/ToolRulesCheck.py:1349
msgid "All Rules"
msgstr "All Rules"

#: appTools/ToolRulesCheck.py:1351
msgid "This check/uncheck all the rules below."
msgstr "This check/uncheck all the rules below."

#: appTools/ToolRulesCheck.py:1601
msgid "Run Rules Check"
msgstr "Run Rules Check"

#: appTools/ToolShell.py:59
msgid "Clear the text."
msgstr "Clear the text."

#: appTools/ToolShell.py:91 appTools/ToolShell.py:93
msgid "...processing..."
msgstr "...processing..."

#: appTools/ToolSolderPaste.py:459
msgid "Please enter a tool diameter to add, in Float format."
msgstr "Please enter a tool diameter to add, in Float format."

#: appTools/ToolSolderPaste.py:493
msgid "New Nozzle tool added to Tool Table."
msgstr "New Nozzle tool added to Tool Table."

#: appTools/ToolSolderPaste.py:535
msgid "Nozzle tool from Tool Table was edited."
msgstr "Nozzle tool from Tool Table was edited."

#: appTools/ToolSolderPaste.py:593
msgid "Delete failed. Select a Nozzle tool to delete."
msgstr "Delete failed. Select a Nozzle tool to delete."

#: appTools/ToolSolderPaste.py:598
msgid "Nozzle tool(s) deleted from Tool Table."
msgstr "Nozzle tool(s) deleted from Tool Table."

#: appTools/ToolSolderPaste.py:652
msgid "No SolderPaste mask Gerber object loaded."
msgstr "No SolderPaste mask Gerber object loaded."

#: appTools/ToolSolderPaste.py:670
msgid "Creating Solder Paste dispensing geometry."
msgstr "Creating Solder Paste dispensing geometry."

#: appTools/ToolSolderPaste.py:683
msgid "No Nozzle tools in the tool table."
msgstr "No Nozzle tools in the tool table."

#: appTools/ToolSolderPaste.py:809
msgid "Cancelled. Empty file, it has no geometry..."
msgstr "Cancelled. Empty file, it has no geometry..."

#: appTools/ToolSolderPaste.py:812
msgid "Solder Paste geometry generated successfully"
msgstr "Solder Paste geometry generated successfully"

#: appTools/ToolSolderPaste.py:819
msgid "Some or all pads have no solder due of inadequate nozzle diameters..."
msgstr "Some or all pads have no solder due of inadequate nozzle diameters..."

#: appTools/ToolSolderPaste.py:833
msgid "Generating Solder Paste dispensing geometry..."
msgstr "Generating Solder Paste dispensing geometry..."

#: appTools/ToolSolderPaste.py:852
msgid "There is no Geometry object available."
msgstr "There is no Geometry object available."

#: appTools/ToolSolderPaste.py:857
msgid "This Geometry can't be processed. NOT a solder_paste_tool geometry."
msgstr "This Geometry can't be processed. NOT a solder_paste_tool geometry."

#: appTools/ToolSolderPaste.py:893
msgid "An internal error has ocurred. See shell.\n"
msgstr "An internal error has ocurred. See shell.\n"

#: appTools/ToolSolderPaste.py:962
msgid "ToolSolderPaste CNCjob created"
msgstr "ToolSolderPaste CNCjob created"

#: appTools/ToolSolderPaste.py:981
msgid "SP GCode Editor"
msgstr "SP GCode Editor"

#: appTools/ToolSolderPaste.py:993 appTools/ToolSolderPaste.py:998
#: appTools/ToolSolderPaste.py:1047
msgid ""
"This CNCJob object can't be processed. NOT a solder_paste_tool CNCJob object."
msgstr ""
"This CNCJob object can't be processed. NOT a solder_paste_tool CNCJob object."

#: appTools/ToolSolderPaste.py:1022
msgid "No Gcode in the object"
msgstr "No Gcode in the object"

#: appTools/ToolSolderPaste.py:1057
msgid "Export GCode ..."
msgstr "Export GCode ..."

#: appTools/ToolSolderPaste.py:1104
msgid "Solder paste dispenser GCode file saved to"
msgstr "Solder paste dispenser GCode file saved to"

#: appTools/ToolSolderPaste.py:1114
msgid "Solder Paste Tool"
msgstr "Solder Paste Tool"

#: appTools/ToolSolderPaste.py:1144
msgid "Gerber Solderpaste object."
msgstr "Gerber Solderpaste object."

#: appTools/ToolSolderPaste.py:1157
msgid ""
"Tools pool from which the algorithm\n"
"will pick the ones used for dispensing solder paste."
msgstr ""
"Tools pool from which the algorithm\n"
"will pick the ones used for dispensing solder paste."

#: appTools/ToolSolderPaste.py:1172
msgid ""
"This is the Tool Number.\n"
"The solder dispensing will start with the tool with the biggest \n"
"diameter, continuing until there are no more Nozzle tools.\n"
"If there are no longer tools but there are still pads not covered\n"
" with solder paste, the app will issue a warning message box."
msgstr ""
"This is the Tool Number.\n"
"The solder dispensing will start with the tool with the biggest \n"
"diameter, continuing until there are no more Nozzle tools.\n"
"If there are no longer tools but there are still pads not covered\n"
" with solder paste, the app will issue a warning message box."

#: appTools/ToolSolderPaste.py:1179
msgid ""
"Nozzle tool Diameter. It's value (in current FlatCAM units)\n"
"is the width of the solder paste dispensed."
msgstr ""
"Nozzle tool Diameter. It's value (in current FlatCAM units)\n"
"is the width of the solder paste dispensed."

#: appTools/ToolSolderPaste.py:1186
msgid "New Nozzle Tool"
msgstr "New Nozzle Tool"

#: appTools/ToolSolderPaste.py:1205
msgid ""
"Add a new nozzle tool to the Tool Table\n"
"with the diameter specified above."
msgstr ""
"Add a new nozzle tool to the Tool Table\n"
"with the diameter specified above."

#: appTools/ToolSolderPaste.py:1227
msgid "STEP 1"
msgstr "STEP 1"

#: appTools/ToolSolderPaste.py:1229
msgid ""
"First step is to select a number of nozzle tools for usage\n"
"and then optionally modify the GCode parameters below."
msgstr ""
"First step is to select a number of nozzle tools for usage\n"
"and then optionally modify the GCode parameters below."

#: appTools/ToolSolderPaste.py:1232
msgid ""
"Select tools.\n"
"Modify parameters."
msgstr ""
"Select tools.\n"
"Modify parameters."

#: appTools/ToolSolderPaste.py:1352
msgid ""
"Feedrate (speed) while moving up vertically\n"
" to Dispense position (on Z plane)."
msgstr ""
"Feedrate (speed) while moving up vertically\n"
" to Dispense position (on Z plane)."

#: appTools/ToolSolderPaste.py:1422
msgid ""
"Generate GCode for Solder Paste dispensing\n"
"on PCB pads."
msgstr ""
"Generate GCode for Solder Paste dispensing\n"
"on PCB pads."

#: appTools/ToolSolderPaste.py:1443
msgid "STEP 2"
msgstr "STEP 2"

#: appTools/ToolSolderPaste.py:1445
msgid ""
"Second step is to create a solder paste dispensing\n"
"geometry out of an Solder Paste Mask Gerber file."
msgstr ""
"Second step is to create a solder paste dispensing\n"
"geometry out of an Solder Paste Mask Gerber file."

#: appTools/ToolSolderPaste.py:1449
msgid "Generate Geo"
msgstr "Generate Geo"

#: appTools/ToolSolderPaste.py:1451
msgid "Generate solder paste dispensing geometry."
msgstr "Generate solder paste dispensing geometry."

#: appTools/ToolSolderPaste.py:1474
msgid "Geo Result"
msgstr "Geo Result"

#: appTools/ToolSolderPaste.py:1476
msgid ""
"Geometry Solder Paste object.\n"
"The name of the object has to end in:\n"
"'_solderpaste' as a protection."
msgstr ""
"Geometry Solder Paste object.\n"
"The name of the object has to end in:\n"
"'_solderpaste' as a protection."

#: appTools/ToolSolderPaste.py:1485
msgid "STEP 3"
msgstr "STEP 3"

#: appTools/ToolSolderPaste.py:1487
msgid ""
"Third step is to select a solder paste dispensing geometry,\n"
"and then generate a CNCJob object.\n"
"\n"
"REMEMBER: if you want to create a CNCJob with new parameters,\n"
"first you need to generate a geometry with those new params,\n"
"and only after that you can generate an updated CNCJob."
msgstr ""
"Third step is to select a solder paste dispensing geometry,\n"
"and then generate a CNCJob object.\n"
"\n"
"REMEMBER: if you want to create a CNCJob with new parameters,\n"
"first you need to generate a geometry with those new params,\n"
"and only after that you can generate an updated CNCJob."

#: appTools/ToolSolderPaste.py:1508
msgid "CNC Result"
msgstr "CNC Result"

#: appTools/ToolSolderPaste.py:1510
msgid ""
"CNCJob Solder paste object.\n"
"In order to enable the GCode save section,\n"
"the name of the object has to end in:\n"
"'_solderpaste' as a protection."
msgstr ""
"CNCJob Solder paste object.\n"
"In order to enable the GCode save section,\n"
"the name of the object has to end in:\n"
"'_solderpaste' as a protection."

#: appTools/ToolSolderPaste.py:1520
msgid "View GCode"
msgstr "View GCode"

#: appTools/ToolSolderPaste.py:1522
msgid ""
"View the generated GCode for Solder Paste dispensing\n"
"on PCB pads."
msgstr ""
"View the generated GCode for Solder Paste dispensing\n"
"on PCB pads."

#: appTools/ToolSolderPaste.py:1532
msgid "Save GCode"
msgstr "Save GCode"

#: appTools/ToolSolderPaste.py:1534
msgid ""
"Save the generated GCode for Solder Paste dispensing\n"
"on PCB pads, to a file."
msgstr ""
"Save the generated GCode for Solder Paste dispensing\n"
"on PCB pads, to a file."

#: appTools/ToolSolderPaste.py:1544
msgid "STEP 4"
msgstr "STEP 4"

#: appTools/ToolSolderPaste.py:1546
msgid ""
"Fourth step (and last) is to select a CNCJob made from \n"
"a solder paste dispensing geometry, and then view/save it's GCode."
msgstr ""
"Fourth step (and last) is to select a CNCJob made from \n"
"a solder paste dispensing geometry, and then view/save it's GCode."

#: appTools/ToolSub.py:126
msgid "Sub Tool"
msgstr "Sub Tool"

#: appTools/ToolSub.py:147 appTools/ToolSub.py:351
msgid "No Target object loaded."
msgstr "No Target object loaded."

#: appTools/ToolSub.py:150
msgid "Loading geometry from Gerber objects."
msgstr "Loading geometry from Gerber objects."

#: appTools/ToolSub.py:162 appTools/ToolSub.py:364
msgid "No Subtractor object loaded."
msgstr "No Subtractor object loaded."

#: appTools/ToolSub.py:204
msgid "Finished parsing geometry for aperture"
msgstr "Finished parsing geometry for aperture"

#: appTools/ToolSub.py:206
msgid "Subtraction aperture processing finished."
msgstr "Subtraction aperture processing finished."

#: appTools/ToolSub.py:326 appTools/ToolSub.py:515
msgid "Generating new object ..."
msgstr "Generating new object ..."

#: appTools/ToolSub.py:329 appTools/ToolSub.py:518 appTools/ToolSub.py:595
msgid "Generating new object failed."
msgstr "Generating new object failed."

#: appTools/ToolSub.py:333 appTools/ToolSub.py:523
msgid "Created"
msgstr "Created"

#: appTools/ToolSub.py:377
msgid "Currently, the Subtractor geometry cannot be of type Multigeo."
msgstr "Currently, the Subtractor geometry cannot be of type Multigeo."

#: appTools/ToolSub.py:417
msgid "Parsing solid_geometry ..."
msgstr "Parsing solid_geometry ..."

#: appTools/ToolSub.py:419
msgid "Parsing solid_geometry for tool"
msgstr "Parsing solid_geometry for tool"

#: appTools/ToolSub.py:654
msgid ""
"Gerber object from which to subtract\n"
"the subtractor Gerber object."
msgstr ""
"Gerber object from which to subtract\n"
"the subtractor Gerber object."

#: appTools/ToolSub.py:667 appTools/ToolSub.py:722
msgid "Subtractor"
msgstr "Subtractor"

#: appTools/ToolSub.py:669
msgid ""
"Gerber object that will be subtracted\n"
"from the target Gerber object."
msgstr ""
"Gerber object that will be subtracted\n"
"from the target Gerber object."

#: appTools/ToolSub.py:676
msgid "Subtract Gerber"
msgstr "Subtract Gerber"

#: appTools/ToolSub.py:678
msgid ""
"Will remove the area occupied by the subtractor\n"
"Gerber from the Target Gerber.\n"
"Can be used to remove the overlapping silkscreen\n"
"over the soldermask."
msgstr ""
"Will remove the area occupied by the subtractor\n"
"Gerber from the Target Gerber.\n"
"Can be used to remove the overlapping silkscreen\n"
"over the soldermask."

#: appTools/ToolSub.py:709
msgid ""
"Geometry object from which to subtract\n"
"the subtractor Geometry object."
msgstr ""
"Geometry object from which to subtract\n"
"the subtractor Geometry object."

#: appTools/ToolSub.py:724
msgid ""
"Geometry object that will be subtracted\n"
"from the target Geometry object."
msgstr ""
"Geometry object that will be subtracted\n"
"from the target Geometry object."

#: appTools/ToolSub.py:732
msgid ""
"Checking this will close the paths cut by the Geometry subtractor object."
msgstr ""
"Checking this will close the paths cut by the Geometry subtractor object."

#: appTools/ToolSub.py:735
msgid "Subtract Geometry"
msgstr "Subtract Geometry"

#: appTools/ToolSub.py:737
msgid ""
"Will remove the area occupied by the subtractor\n"
"Geometry from the Target Geometry."
msgstr ""
"Will remove the area occupied by the subtractor\n"
"Geometry from the Target Geometry."

#: appTools/ToolTransform.py:293
msgid "No object selected. Please Select an object to rotate!"
msgstr "No object selected. Please Select an object to rotate!"

#: appTools/ToolTransform.py:301
msgid "CNCJob objects can't be rotated."
msgstr "CNCJob objects can't be rotated."

#: appTools/ToolTransform.py:309
msgid "Rotate done"
msgstr "Rotate done"

#: appTools/ToolTransform.py:312 appTools/ToolTransform.py:353
#: appTools/ToolTransform.py:386 appTools/ToolTransform.py:414
msgid "Due of"
msgstr "Due of"

#: appTools/ToolTransform.py:312 appTools/ToolTransform.py:353
#: appTools/ToolTransform.py:386 appTools/ToolTransform.py:414
msgid "action was not executed."
msgstr "action was not executed."

#: appTools/ToolTransform.py:319
msgid "No object selected. Please Select an object to flip"
msgstr "No object selected. Please Select an object to flip"

#: appTools/ToolTransform.py:329
msgid "CNCJob objects can't be mirrored/flipped."
msgstr "CNCJob objects can't be mirrored/flipped."

#: appTools/ToolTransform.py:361
msgid "Skew transformation can not be done for 0, 90 and 180 degrees."
msgstr "Skew transformation can not be done for 0, 90 and 180 degrees."

#: appTools/ToolTransform.py:366
msgid "No object selected. Please Select an object to shear/skew!"
msgstr "No object selected. Please Select an object to shear/skew!"

#: appTools/ToolTransform.py:375
msgid "CNCJob objects can't be skewed."
msgstr "CNCJob objects can't be skewed."

#: appTools/ToolTransform.py:383
msgid "Skew on the"
msgstr "Skew on the"

#: appTools/ToolTransform.py:383 appTools/ToolTransform.py:411
#: appTools/ToolTransform.py:441
msgid "axis done"
msgstr "axis done"

#: appTools/ToolTransform.py:393
msgid "No object selected. Please Select an object to scale!"
msgstr "No object selected. Please Select an object to scale!"

#: appTools/ToolTransform.py:402
msgid "CNCJob objects can't be scaled."
msgstr "CNCJob objects can't be scaled."

#: appTools/ToolTransform.py:411
msgid "Scale on the"
msgstr "Scale on the"

#: appTools/ToolTransform.py:421
msgid "No object selected. Please Select an object to offset!"
msgstr "No object selected. Please Select an object to offset!"

#: appTools/ToolTransform.py:428
msgid "CNCJob objects can't be offset."
msgstr "CNCJob objects can't be offset."

#: appTools/ToolTransform.py:441
msgid "Offset on the"
msgstr "Offset on the"

#: appTools/ToolTransform.py:450
msgid "No object selected. Please Select an object to buffer!"
msgstr "No object selected. Please Select an object to buffer!"

#: appTools/ToolTransform.py:457
msgid "CNCJob objects can't be buffered."
msgstr "CNCJob objects can't be buffered."

#: appTools/ToolTransform.py:512
msgid "Object Transform"
msgstr "Object Transform"

#: appTools/ToolTransform.py:603
msgid ""
"The object used as reference.\n"
"The used point is the center of it's bounding box."
msgstr ""
"The object used as reference.\n"
"The used point is the center of it's bounding box."

#: appTranslation.py:105
msgid "The application will restart."
msgstr "The application will restart."

#: appTranslation.py:107
msgid "Are you sure do you want to change the current language to"
msgstr "Are you sure do you want to change the current language to"

#: appTranslation.py:108
msgid "Apply Language ..."
msgstr "Apply Language ..."

#: appTranslation.py:207 app_Main.py:3377
msgid ""
"There are files/objects modified in FlatCAM. \n"
"Do you want to Save the project?"
msgstr ""
"There are files/objects modified in FlatCAM. \n"
"Do you want to Save the project?"

#: app_Main.py:490
msgid "FlatCAM is initializing ..."
msgstr "FlatCAM is initializing ..."

#: app_Main.py:650
msgid "Could not find the Language files. The App strings are missing."
msgstr "Could not find the Language files. The App strings are missing."

#: app_Main.py:722
msgid ""
"FlatCAM is initializing ...\n"
"Canvas initialization started."
msgstr ""
"FlatCAM is initializing ...\n"
"Canvas initialization started."

#: app_Main.py:742
msgid ""
"FlatCAM is initializing ...\n"
"Canvas initialization started.\n"
"Canvas initialization finished in"
msgstr ""
"FlatCAM is initializing ...\n"
"Canvas initialization started.\n"
"Canvas initialization finished in"

#: app_Main.py:1590 app_Main.py:7001
msgid "New Project - Not saved"
msgstr "New Project - Not saved"

#: app_Main.py:1696
msgid ""
"Found old default preferences files. Please reboot the application to update."
msgstr ""
"Found old default preferences files. Please reboot the application to update."

#: app_Main.py:1763
msgid "Open Config file failed."
msgstr "Open Config file failed."

#: app_Main.py:1778
msgid "Open Script file failed."
msgstr "Open Script file failed."

#: app_Main.py:1804
msgid "Open Excellon file failed."
msgstr "Open Excellon file failed."

#: app_Main.py:1817
msgid "Open GCode file failed."
msgstr "Open GCode file failed."

#: app_Main.py:1830
msgid "Open Gerber file failed."
msgstr "Open Gerber file failed."

#: app_Main.py:2168
msgid "Select a Geometry, Gerber, Excellon or CNCJob Object to edit."
msgstr "Select a Geometry, Gerber, Excellon or CNCJob Object to edit."

#: app_Main.py:2183
msgid ""
"Simultaneous editing of tools geometry in a MultiGeo Geometry is not "
"possible.\n"
"Edit only one geometry at a time."
msgstr ""
"Simultaneous editing of tools geometry in a MultiGeo Geometry is not "
"possible.\n"
"Edit only one geometry at a time."

#: app_Main.py:2263
msgid "Editor is activated ..."
msgstr "Editor is activated ..."

#: app_Main.py:2284
msgid "Do you want to save the edited object?"
msgstr "Do you want to save the edited object?"

#: app_Main.py:2325
msgid "Object empty after edit."
msgstr "Object empty after edit."

#: app_Main.py:2330 app_Main.py:2348 app_Main.py:2379 app_Main.py:2395
msgid "Editor exited. Editor content saved."
msgstr "Editor exited. Editor content saved."

#: app_Main.py:2399
#, fuzzy
#| msgid "Select a Gerber, Geometry or Excellon Object to update."
msgid "Select a Gerber, Geometry, Excellon or CNCJobObject to update."
msgstr "Select a Gerber, Geometry or Excellon Object to update."

#: app_Main.py:2402
msgid "is updated, returning to App..."
msgstr "is updated, returning to App..."

#: app_Main.py:2415
msgid "Editor exited. Editor content was not saved."
msgstr "Editor exited. Editor content was not saved."

#: app_Main.py:2440
#, fuzzy
#| msgid "Select a Gerber, Geometry or Excellon Object to update."
msgid "Select a Gerber, Geometry, Excellon or CNCJob Object to update."
msgstr "Select a Gerber, Geometry or Excellon Object to update."

#: app_Main.py:2463
msgid "Select a Gerber, Geometry or Excellon Object to update."
msgstr "Select a Gerber, Geometry or Excellon Object to update."

#: app_Main.py:2567 app_Main.py:2571
msgid "Import FlatCAM Preferences"
msgstr "Import FlatCAM Preferences"

#: app_Main.py:2582
msgid "Imported Defaults from"
msgstr "Imported Defaults from"

#: app_Main.py:2602 app_Main.py:2608
msgid "Export FlatCAM Preferences"
msgstr "Export FlatCAM Preferences"

#: app_Main.py:2628
msgid "Exported preferences to"
msgstr "Exported preferences to"

#: app_Main.py:2648 app_Main.py:2653
msgid "Save to file"
msgstr "Save to file"

#: app_Main.py:2677
msgid "Could not load the file."
msgstr "Could not load the file."

#: app_Main.py:2693
msgid "Exported file to"
msgstr "Exported file to"

#: app_Main.py:2730
msgid "Failed to open recent files file for writing."
msgstr "Failed to open recent files file for writing."

#: app_Main.py:2741
msgid "Failed to open recent projects file for writing."
msgstr "Failed to open recent projects file for writing."

#: app_Main.py:2796
msgid "2D Computer-Aided Printed Circuit Board Manufacturing"
msgstr "2D Computer-Aided Printed Circuit Board Manufacturing"

#: app_Main.py:2797
msgid "Development"
msgstr "Development"

#: app_Main.py:2798
msgid "DOWNLOAD"
msgstr "DOWNLOAD"

#: app_Main.py:2799
msgid "Issue tracker"
msgstr "Issue tracker"

#: app_Main.py:2818
msgid "Licensed under the MIT license"
msgstr "Licensed under the MIT license"

#: app_Main.py:2827
msgid ""
"Permission is hereby granted, free of charge, to any person obtaining a "
"copy\n"
"of this software and associated documentation files (the \"Software\"), to "
"deal\n"
"in the Software without restriction, including without limitation the "
"rights\n"
"to use, copy, modify, merge, publish, distribute, sublicense, and/or sell\n"
"copies of the Software, and to permit persons to whom the Software is\n"
"furnished to do so, subject to the following conditions:\n"
"\n"
"The above copyright notice and this permission notice shall be included in\n"
"all copies or substantial portions of the Software.\n"
"\n"
"THE SOFTWARE IS PROVIDED \"AS IS\", WITHOUT WARRANTY OF ANY KIND, EXPRESS "
"OR\n"
"IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,\n"
"FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE\n"
"AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER\n"
"LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING "
"FROM,\n"
"OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN\n"
"THE SOFTWARE."
msgstr ""
"Permission is hereby granted, free of charge, to any person obtaining a "
"copy\n"
"of this software and associated documentation files (the \"Software\"), to "
"deal\n"
"in the Software without restriction, including without limitation the "
"rights\n"
"to use, copy, modify, merge, publish, distribute, sublicense, and/or sell\n"
"copies of the Software, and to permit persons to whom the Software is\n"
"furnished to do so, subject to the following conditions:\n"
"\n"
"The above copyright notice and this permission notice shall be included in\n"
"all copies or substantial portions of the Software.\n"
"\n"
"THE SOFTWARE IS PROVIDED \"AS IS\", WITHOUT WARRANTY OF ANY KIND, EXPRESS "
"OR\n"
"IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,\n"
"FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE\n"
"AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER\n"
"LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING "
"FROM,\n"
"OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN\n"
"THE SOFTWARE."

#: app_Main.py:2849
msgid ""
"Some of the icons used are from the following sources:<br><div>Icons by <a "
"href=\"https://www.flaticon.com/authors/freepik\" title=\"Freepik\">Freepik</"
"a> from <a href=\"https://www.flaticon.com/\"             title=\"Flaticon"
"\">www.flaticon.com</a></div><div>Icons by <a target=\"_blank\" href="
"\"https://icons8.com\">Icons8</a></div>Icons by <a href=\"http://www."
"onlinewebfonts.com\">oNline Web Fonts</a><div>Icons by <a href=\"https://www."
"flaticon.com/authors/pixel-perfect\" title=\"Pixel perfect\">Pixel perfect</"
"a> from <a href=\"https://www.flaticon.com/\" title=\"Flaticon\">www."
"flaticon.com</a></div>"
msgstr ""
"Some of the icons used are from the following sources:<br><div>Icons by <a "
"href=\"https://www.flaticon.com/authors/freepik\" title=\"Freepik\">Freepik</"
"a> from <a href=\"https://www.flaticon.com/\"             title=\"Flaticon"
"\">www.flaticon.com</a></div><div>Icons by <a target=\"_blank\" href="
"\"https://icons8.com\">Icons8</a></div>Icons by <a href=\"http://www."
"onlinewebfonts.com\">oNline Web Fonts</a><div>Icons by <a href=\"https://www."
"flaticon.com/authors/pixel-perfect\" title=\"Pixel perfect\">Pixel perfect</"
"a> from <a href=\"https://www.flaticon.com/\" title=\"Flaticon\">www."
"flaticon.com</a></div>"

#: app_Main.py:2885
msgid "Splash"
msgstr "Splash"

#: app_Main.py:2891
msgid "Programmers"
msgstr "Programmers"

#: app_Main.py:2897
msgid "Translators"
msgstr "Translators"

#: app_Main.py:2903
msgid "License"
msgstr "License"

#: app_Main.py:2909
msgid "Attributions"
msgstr "Attributions"

#: app_Main.py:2932
msgid "Programmer"
msgstr "Programmer"

#: app_Main.py:2933
msgid "Status"
msgstr "Status"

#: app_Main.py:2934 app_Main.py:3014
msgid "E-mail"
msgstr "E-mail"

#: app_Main.py:2937
msgid "Program Author"
msgstr "Program Author"

#: app_Main.py:2942
msgid "BETA Maintainer >= 2019"
msgstr "BETA Maintainer >= 2019"

#: app_Main.py:3011
msgid "Language"
msgstr "Language"

#: app_Main.py:3012
msgid "Translator"
msgstr "Translator"

#: app_Main.py:3013
msgid "Corrections"
msgstr "Corrections"

#: app_Main.py:3098
msgid "Important Information's"
msgstr "Important Information's"

#: app_Main.py:3146
#, python-format
msgid "This program is %s and free in a very wide meaning of the word."
msgstr "This program is %s and free in a very wide meaning of the word."

#: app_Main.py:3147
msgid "Yet it cannot evolve without <b>contributions</b>."
msgstr "Yet it cannot evolve without <b>contributions</b>."

#: app_Main.py:3148
msgid "If you want to see this application grow and become better and better"
msgstr "If you want to see this application grow and become better and better"

#: app_Main.py:3149
msgid "you can <b>contribute</b> to the development yourself by:"
msgstr "you can <b>contribute</b> to the development yourself by:"

#: app_Main.py:3150
msgid "Pull Requests on the Bitbucket repository, if you are a developer"
msgstr "Pull Requests on the Bitbucket repository, if you are a developer"

#: app_Main.py:3152
msgid "Bug Reports by providing the steps required to reproduce the bug"
msgstr "Bug Reports by providing the steps required to reproduce the bug"

#: app_Main.py:3183
msgid "Contribute"
msgstr "Contribute"

#: app_Main.py:3206
msgid "Links Exchange"
msgstr "Links Exchange"

#: app_Main.py:3218 app_Main.py:3237
msgid "Soon ..."
msgstr "Soon ..."

#: app_Main.py:3225
msgid "How To's"
msgstr "How To's"

#: app_Main.py:3337
msgid ""
"This entry will resolve to another website if:\n"
"\n"
"1. FlatCAM.org website is down\n"
"2. Someone forked FlatCAM project and wants to point\n"
"to his own website\n"
"\n"
"If you can't get any informations about FlatCAM beta\n"
"use the YouTube channel link from the Help menu."
msgstr ""
"This entry will resolve to another website if:\n"
"\n"
"1. FlatCAM.org website is down\n"
"2. Someone forked FlatCAM project and wants to point\n"
"to his own website\n"
"\n"
"If you can't get any informations about FlatCAM beta\n"
"use the YouTube channel link from the Help menu."

#: app_Main.py:3344
msgid "Alternative website"
msgstr "Alternative website"

#: app_Main.py:3695
msgid "Selected Excellon file extensions registered with FlatCAM."
msgstr "Selected Excellon file extensions registered with FlatCAM."

#: app_Main.py:3717
msgid "Selected GCode file extensions registered with FlatCAM."
msgstr "Selected GCode file extensions registered with FlatCAM."

#: app_Main.py:3739
msgid "Selected Gerber file extensions registered with FlatCAM."
msgstr "Selected Gerber file extensions registered with FlatCAM."

#: app_Main.py:3927 app_Main.py:3988 app_Main.py:4018
msgid "At least two objects are required for join. Objects currently selected"
msgstr "At least two objects are required for join. Objects currently selected"

#: app_Main.py:3936
msgid ""
"Failed join. The Geometry objects are of different types.\n"
"At least one is MultiGeo type and the other is SingleGeo type. A possibility "
"is to convert from one to another and retry joining \n"
"but in the case of converting from MultiGeo to SingleGeo, informations may "
"be lost and the result may not be what was expected. \n"
"Check the generated GCODE."
msgstr ""
"Failed join. The Geometry objects are of different types.\n"
"At least one is MultiGeo type and the other is SingleGeo type. A possibility "
"is to convert from one to another and retry joining \n"
"but in the case of converting from MultiGeo to SingleGeo, informations may "
"be lost and the result may not be what was expected. \n"
"Check the generated GCODE."

#: app_Main.py:3950 app_Main.py:3960
msgid "Geometry merging finished"
msgstr "Geometry merging finished"

#: app_Main.py:3983
msgid "Failed. Excellon joining works only on Excellon objects."
msgstr "Failed. Excellon joining works only on Excellon objects."

#: app_Main.py:3995
msgid "Excellon merging finished"
msgstr "Excellon merging finished"

#: app_Main.py:4013
msgid "Failed. Gerber joining works only on Gerber objects."
msgstr "Failed. Gerber joining works only on Gerber objects."

#: app_Main.py:4023
msgid "Gerber merging finished"
msgstr "Gerber merging finished"

#: app_Main.py:4043 app_Main.py:4080
msgid "Failed. Select a Geometry Object and try again."
msgstr "Failed. Select a Geometry Object and try again."

#: app_Main.py:4047 app_Main.py:4085
msgid "Expected a GeometryObject, got"
msgstr "Expected a GeometryObject, got"

#: app_Main.py:4062
msgid "A Geometry object was converted to MultiGeo type."
msgstr "A Geometry object was converted to MultiGeo type."

#: app_Main.py:4100
msgid "A Geometry object was converted to SingleGeo type."
msgstr "A Geometry object was converted to SingleGeo type."

#: app_Main.py:4333
msgid "Toggle Units"
msgstr "Toggle Units"

#: app_Main.py:4337
msgid ""
"Changing the units of the project\n"
"will scale all objects.\n"
"\n"
"Do you want to continue?"
msgstr ""
"Changing the units of the project\n"
"will scale all objects.\n"
"\n"
"Do you want to continue?"

#: app_Main.py:4340 app_Main.py:4503 app_Main.py:4586 app_Main.py:7321
#: app_Main.py:7337 app_Main.py:7675 app_Main.py:7687
msgid "Ok"
msgstr "Ok"

#: app_Main.py:4390
msgid "Converted units to"
msgstr "Converted units to"

#: app_Main.py:4430
msgid "Workspace enabled."
msgstr "Workspace enabled."

#: app_Main.py:4433
msgid "Workspace disabled."
msgstr "Workspace disabled."

#: app_Main.py:4497
msgid ""
"Adding Tool works only when Advanced is checked.\n"
"Go to Preferences -> General - Show Advanced Options."
msgstr ""
"Adding Tool works only when Advanced is checked.\n"
"Go to Preferences -> General - Show Advanced Options."

#: app_Main.py:4579
msgid "Delete objects"
msgstr "Delete objects"

#: app_Main.py:4584
msgid ""
"Are you sure you want to permanently delete\n"
"the selected objects?"
msgstr ""
"Are you sure you want to permanently delete\n"
"the selected objects?"

#: app_Main.py:4627
msgid "Object(s) deleted"
msgstr "Object(s) deleted"

#: app_Main.py:4631
msgid "Save the work in Editor and try again ..."
msgstr "Save the work in Editor and try again ..."

#: app_Main.py:4660
msgid "Object deleted"
msgstr "Object deleted"

#: app_Main.py:4687
msgid "Click to set the origin ..."
msgstr "Click to set the origin ..."

#: app_Main.py:4709
msgid "Setting Origin..."
msgstr "Setting Origin..."

#: app_Main.py:4722 app_Main.py:4824
msgid "Origin set"
msgstr "Origin set"

#: app_Main.py:4739
msgid "Origin coordinates specified but incomplete."
msgstr "Origin coordinates specified but incomplete."

#: app_Main.py:4780
msgid "Moving to Origin..."
msgstr "Moving to Origin..."

#: app_Main.py:4861
msgid "Jump to ..."
msgstr "Jump to ..."

#: app_Main.py:4862
msgid "Enter the coordinates in format X,Y:"
msgstr "Enter the coordinates in format X,Y:"

#: app_Main.py:4872
msgid "Wrong coordinates. Enter coordinates in format: X,Y"
msgstr "Wrong coordinates. Enter coordinates in format: X,Y"

#: app_Main.py:4989
msgid "Bottom-Left"
msgstr "Bottom-Left"

#: app_Main.py:4992
msgid "Top-Right"
msgstr "Top-Right"

#: app_Main.py:5013
msgid "Locate ..."
msgstr "Locate ..."

#: app_Main.py:5286 app_Main.py:5361 app_Main.py:5524
msgid "No object is selected. Select an object and try again."
msgstr "No object is selected. Select an object and try again."

#: app_Main.py:5550
msgid ""
"Aborting. The current task will be gracefully closed as soon as possible..."
msgstr ""
"Aborting. The current task will be gracefully closed as soon as possible..."

#: app_Main.py:5556
msgid "The current task was gracefully closed on user request..."
msgstr "The current task was gracefully closed on user request..."

#: app_Main.py:5746
msgid "Tools in Tools Database edited but not saved."
msgstr "Tools in Tools Database edited but not saved."

#: app_Main.py:5785
msgid "Adding tool from DB is not allowed for this object."
msgstr "Adding tool from DB is not allowed for this object."

#: app_Main.py:5803
msgid ""
"One or more Tools are edited.\n"
"Do you want to update the Tools Database?"
msgstr ""
"One or more Tools are edited.\n"
"Do you want to update the Tools Database?"

#: app_Main.py:5805
msgid "Save Tools Database"
msgstr "Save Tools Database"

#: app_Main.py:5851
msgid "No object selected to Flip on Y axis."
msgstr "No object selected to Flip on Y axis."

#: app_Main.py:5877
msgid "Flip on Y axis done."
msgstr "Flip on Y axis done."

#: app_Main.py:5899
msgid "No object selected to Flip on X axis."
msgstr "No object selected to Flip on X axis."

#: app_Main.py:5925
msgid "Flip on X axis done."
msgstr "Flip on X axis done."

#: app_Main.py:5947
msgid "No object selected to Rotate."
msgstr "No object selected to Rotate."

#: app_Main.py:5950 app_Main.py:6001 app_Main.py:6038
msgid "Transform"
msgstr "Transform"

#: app_Main.py:5950 app_Main.py:6001 app_Main.py:6038
msgid "Enter the Angle value:"
msgstr "Enter the Angle value:"

#: app_Main.py:5980
msgid "Rotation done."
msgstr "Rotation done."

#: app_Main.py:5982
msgid "Rotation movement was not executed."
msgstr "Rotation movement was not executed."

#: app_Main.py:5999
msgid "No object selected to Skew/Shear on X axis."
msgstr "No object selected to Skew/Shear on X axis."

#: app_Main.py:6020
msgid "Skew on X axis done."
msgstr "Skew on X axis done."

#: app_Main.py:6036
msgid "No object selected to Skew/Shear on Y axis."
msgstr "No object selected to Skew/Shear on Y axis."

#: app_Main.py:6057
msgid "Skew on Y axis done."
msgstr "Skew on Y axis done."

#: app_Main.py:6139
msgid "New Grid ..."
msgstr "New Grid ..."

#: app_Main.py:6140
msgid "Enter a Grid Value:"
msgstr "Enter a Grid Value:"

#: app_Main.py:6148 app_Main.py:6172
msgid "Please enter a grid value with non-zero value, in Float format."
msgstr "Please enter a grid value with non-zero value, in Float format."

#: app_Main.py:6153
msgid "New Grid added"
msgstr "New Grid added"

#: app_Main.py:6155
msgid "Grid already exists"
msgstr "Grid already exists"

#: app_Main.py:6157
msgid "Adding New Grid cancelled"
msgstr "Adding New Grid cancelled"

#: app_Main.py:6178
msgid " Grid Value does not exist"
msgstr " Grid Value does not exist"

#: app_Main.py:6180
msgid "Grid Value deleted"
msgstr "Grid Value deleted"

#: app_Main.py:6182
msgid "Delete Grid value cancelled"
msgstr "Delete Grid value cancelled"

#: app_Main.py:6188
msgid "Key Shortcut List"
msgstr "Key Shortcut List"

#: app_Main.py:6225
msgid " No object selected to copy it's name"
msgstr " No object selected to copy it's name"

#: app_Main.py:6229
msgid "Name copied on clipboard ..."
msgstr "Name copied on clipboard ..."

#: app_Main.py:6886
msgid ""
"There are files/objects opened in FlatCAM.\n"
"Creating a New project will delete them.\n"
"Do you want to Save the project?"
msgstr ""
"There are files/objects opened in FlatCAM.\n"
"Creating a New project will delete them.\n"
"Do you want to Save the project?"

#: app_Main.py:6909
msgid "New Project created"
msgstr "New Project created"

#: app_Main.py:7115 app_Main.py:7154 app_Main.py:7198 app_Main.py:7268
#: app_Main.py:8054 app_Main.py:9298 app_Main.py:9360
msgid ""
"Canvas initialization started.\n"
"Canvas initialization finished in"
msgstr ""
"Canvas initialization started.\n"
"Canvas initialization finished in"

#: app_Main.py:7117
msgid "Opening Gerber file."
msgstr "Opening Gerber file."

#: app_Main.py:7156
msgid "Opening Excellon file."
msgstr "Opening Excellon file."

#: app_Main.py:7187 app_Main.py:7192
msgid "Open G-Code"
msgstr "Open G-Code"

#: app_Main.py:7200
msgid "Opening G-Code file."
msgstr "Opening G-Code file."

#: app_Main.py:7259 app_Main.py:7263
msgid "Open HPGL2"
msgstr "Open HPGL2"

#: app_Main.py:7270
msgid "Opening HPGL2 file."
msgstr "Opening HPGL2 file."

#: app_Main.py:7293 app_Main.py:7296
msgid "Open Configuration File"
msgstr "Open Configuration File"

#: app_Main.py:7316 app_Main.py:7670
msgid "Please Select a Geometry object to export"
msgstr "Please Select a Geometry object to export"

#: app_Main.py:7332
msgid "Only Geometry, Gerber and CNCJob objects can be used."
msgstr "Only Geometry, Gerber and CNCJob objects can be used."

#: app_Main.py:7377
msgid "Data must be a 3D array with last dimension 3 or 4"
msgstr "Data must be a 3D array with last dimension 3 or 4"

#: app_Main.py:7383 app_Main.py:7387
msgid "Export PNG Image"
msgstr "Export PNG Image"

#: app_Main.py:7420 app_Main.py:7630
msgid "Failed. Only Gerber objects can be saved as Gerber files..."
msgstr "Failed. Only Gerber objects can be saved as Gerber files..."

#: app_Main.py:7432
msgid "Save Gerber source file"
msgstr "Save Gerber source file"

#: app_Main.py:7461
msgid "Failed. Only Script objects can be saved as TCL Script files..."
msgstr "Failed. Only Script objects can be saved as TCL Script files..."

#: app_Main.py:7473
msgid "Save Script source file"
msgstr "Save Script source file"

#: app_Main.py:7502
msgid "Failed. Only Document objects can be saved as Document files..."
msgstr "Failed. Only Document objects can be saved as Document files..."

#: app_Main.py:7514
msgid "Save Document source file"
msgstr "Save Document source file"

#: app_Main.py:7544 app_Main.py:7586 app_Main.py:8537
msgid "Failed. Only Excellon objects can be saved as Excellon files..."
msgstr "Failed. Only Excellon objects can be saved as Excellon files..."

#: app_Main.py:7552 app_Main.py:7557
msgid "Save Excellon source file"
msgstr "Save Excellon source file"

#: app_Main.py:7594 app_Main.py:7598
msgid "Export Excellon"
msgstr "Export Excellon"

#: app_Main.py:7638 app_Main.py:7642
msgid "Export Gerber"
msgstr "Export Gerber"

#: app_Main.py:7682
msgid "Only Geometry objects can be used."
msgstr "Only Geometry objects can be used."

#: app_Main.py:7698 app_Main.py:7702
msgid "Export DXF"
msgstr "Export DXF"

#: app_Main.py:7727 app_Main.py:7730
msgid "Import SVG"
msgstr "Import SVG"

#: app_Main.py:7758 app_Main.py:7762
msgid "Import DXF"
msgstr "Import DXF"

#: app_Main.py:7816 app_Main.py:7820
msgid "Select an Gerber or Excellon file to view it's source file."
msgstr "Select an Gerber or Excellon file to view it's source file."

#: app_Main.py:7823
msgid "Viewing the source code of the selected object."
msgstr "Viewing the source code of the selected object."

#: app_Main.py:7837
msgid "Source Editor"
msgstr "Source Editor"

#: app_Main.py:7873 app_Main.py:7880
msgid "There is no selected object for which to see it's source file code."
msgstr "There is no selected object for which to see it's source file code."

#: app_Main.py:7888
msgid "Failed to load the source code for the selected object"
msgstr "Failed to load the source code for the selected object"

#: app_Main.py:7921
msgid "Go to Line ..."
msgstr "Go to Line ..."

#: app_Main.py:7922
msgid "Line:"
msgstr "Line:"

#: app_Main.py:7949
msgid "New TCL script file created in Code Editor."
msgstr "New TCL script file created in Code Editor."

#: app_Main.py:7988 app_Main.py:7990 app_Main.py:8026 app_Main.py:8028
msgid "Open TCL script"
msgstr "Open TCL script"

#: app_Main.py:8056
msgid "Executing ScriptObject file."
msgstr "Executing ScriptObject file."

#: app_Main.py:8064 app_Main.py:8067
msgid "Run TCL script"
msgstr "Run TCL script"

#: app_Main.py:8090
msgid "TCL script file opened in Code Editor and executed."
msgstr "TCL script file opened in Code Editor and executed."

#: app_Main.py:8141 app_Main.py:8147
msgid "Save Project As ..."
msgstr "Save Project As ..."

#: app_Main.py:8182
msgid "FlatCAM objects print"
msgstr "FlatCAM objects print"

#: app_Main.py:8195 app_Main.py:8202
msgid "Save Object as PDF ..."
msgstr "Save Object as PDF ..."

#: app_Main.py:8211
msgid "Printing PDF ... Please wait."
msgstr "Printing PDF ... Please wait."

#: app_Main.py:8390
msgid "PDF file saved to"
msgstr "PDF file saved to"

#: app_Main.py:8415
msgid "Exporting SVG"
msgstr "Exporting SVG"

#: app_Main.py:8458
msgid "SVG file exported to"
msgstr "SVG file exported to"

#: app_Main.py:8484
#, fuzzy
#| msgid ""
#| "Save cancelled because source file is empty. Try to export the Gerber "
#| "file."
msgid "Save cancelled because source file is empty. Try to export the file."
msgstr ""
"Save cancelled because source file is empty. Try to export the Gerber file."

#: app_Main.py:8635
msgid "Excellon file exported to"
msgstr "Excellon file exported to"

#: app_Main.py:8644
msgid "Exporting Excellon"
msgstr "Exporting Excellon"

#: app_Main.py:8649 app_Main.py:8656
msgid "Could not export Excellon file."
msgstr "Could not export Excellon file."

#: app_Main.py:8772
msgid "Gerber file exported to"
msgstr "Gerber file exported to"

#: app_Main.py:8780
msgid "Exporting Gerber"
msgstr "Exporting Gerber"

#: app_Main.py:8785 app_Main.py:8792
#, fuzzy
#| msgid "Could not export DXF file."
msgid "Could not export file."
msgstr "Could not export DXF file."

#: app_Main.py:8840
msgid "DXF file exported to"
msgstr "DXF file exported to"

#: app_Main.py:8849
msgid "Exporting DXF"
msgstr "Exporting DXF"

#: app_Main.py:8854 app_Main.py:8861
msgid "Could not export DXF file."
msgstr "Could not export DXF file."

#: app_Main.py:8900
msgid "Importing SVG"
msgstr "Importing SVG"

#: app_Main.py:8908 app_Main.py:8963
msgid "Import failed."
msgstr "Import failed."

#: app_Main.py:8955
msgid "Importing DXF"
msgstr "Importing DXF"

#: app_Main.py:8996 app_Main.py:9187 app_Main.py:9252
msgid "Failed to open file"
msgstr "Failed to open file"

#: app_Main.py:8999 app_Main.py:9190 app_Main.py:9255
msgid "Failed to parse file"
msgstr "Failed to parse file"

#: app_Main.py:9011
msgid "Object is not Gerber file or empty. Aborting object creation."
msgstr "Object is not Gerber file or empty. Aborting object creation."

#: app_Main.py:9016
msgid "Opening Gerber"
msgstr "Opening Gerber"

#: app_Main.py:9027
msgid "Open Gerber failed. Probable not a Gerber file."
msgstr "Open Gerber failed. Probable not a Gerber file."

#: app_Main.py:9060
msgid "Cannot open file"
msgstr "Cannot open file"

#: app_Main.py:9080
msgid "Opening Excellon."
msgstr "Opening Excellon."

#: app_Main.py:9090
msgid "Open Excellon file failed. Probable not an Excellon file."
msgstr "Open Excellon file failed. Probable not an Excellon file."

#: app_Main.py:9122
msgid "Reading GCode file"
msgstr "Reading GCode file"

#: app_Main.py:9135
msgid "This is not GCODE"
msgstr "This is not GCODE"

#: app_Main.py:9140
msgid "Opening G-Code."
msgstr "Opening G-Code."

#: app_Main.py:9153
msgid ""
"Failed to create CNCJob Object. Probable not a GCode file. Try to load it "
"from File menu.\n"
" Attempting to create a FlatCAM CNCJob Object from G-Code file failed during "
"processing"
msgstr ""
"Failed to create CNCJob Object. Probable not a GCode file. Try to load it "
"from File menu.\n"
" Attempting to create a FlatCAM CNCJob Object from G-Code file failed during "
"processing"

#: app_Main.py:9209
msgid "Object is not HPGL2 file or empty. Aborting object creation."
msgstr "Object is not HPGL2 file or empty. Aborting object creation."

#: app_Main.py:9214
msgid "Opening HPGL2"
msgstr "Opening HPGL2"

#: app_Main.py:9221
msgid " Open HPGL2 failed. Probable not a HPGL2 file."
msgstr " Open HPGL2 failed. Probable not a HPGL2 file."

#: app_Main.py:9247
msgid "TCL script file opened in Code Editor."
msgstr "TCL script file opened in Code Editor."

#: app_Main.py:9267
msgid "Opening TCL Script..."
msgstr "Opening TCL Script..."

#: app_Main.py:9278
msgid "Failed to open TCL Script."
msgstr "Failed to open TCL Script."

#: app_Main.py:9300
msgid "Opening FlatCAM Config file."
msgstr "Opening FlatCAM Config file."

#: app_Main.py:9328
msgid "Failed to open config file"
msgstr "Failed to open config file"

#: app_Main.py:9357
msgid "Loading Project ... Please Wait ..."
msgstr "Loading Project ... Please Wait ..."

#: app_Main.py:9362
msgid "Opening FlatCAM Project file."
msgstr "Opening FlatCAM Project file."

#: app_Main.py:9377 app_Main.py:9381 app_Main.py:9398
msgid "Failed to open project file"
msgstr "Failed to open project file"

#: app_Main.py:9437
msgid "Loading Project ... restoring"
msgstr "Loading Project ... restoring"

#: app_Main.py:9445
msgid "Project loaded from"
msgstr "Project loaded from"

#: app_Main.py:9471
msgid "Redrawing all objects"
msgstr "Redrawing all objects"

#: app_Main.py:9559
msgid "Failed to load recent item list."
msgstr "Failed to load recent item list."

#: app_Main.py:9566
msgid "Failed to parse recent item list."
msgstr "Failed to parse recent item list."

#: app_Main.py:9576
msgid "Failed to load recent projects item list."
msgstr "Failed to load recent projects item list."

#: app_Main.py:9583
msgid "Failed to parse recent project item list."
msgstr "Failed to parse recent project item list."

#: app_Main.py:9644
msgid "Clear Recent projects"
msgstr "Clear Recent projects"

#: app_Main.py:9668
msgid "Clear Recent files"
msgstr "Clear Recent files"

#: app_Main.py:9725
#, fuzzy
#| msgid "Selected Tab - Choose an Item from Project Tab"
msgid "Properties Tab - Choose an Item from Project Tab"
msgstr "Selected Tab - Choose an Item from Project Tab"

#: app_Main.py:9726
msgid "Details"
msgstr "Details"

#: app_Main.py:9728
msgid "The normal flow when working with the application is the following:"
msgstr "The normal flow when working with the application is the following:"

#: app_Main.py:9729
msgid ""
"Load/Import a Gerber, Excellon, Gcode, DXF, Raster Image or SVG file into "
"the application using either the toolbars, key shortcuts or even dragging "
"and dropping the files on the GUI."
msgstr ""
"Load/Import a Gerber, Excellon, Gcode, DXF, Raster Image or SVG file into "
"the application using either the toolbars, key shortcuts or even dragging "
"and dropping the files on the GUI."

#: app_Main.py:9732
msgid ""
"You can also load a project by double clicking on the project file, drag and "
"drop of the file into the GUI or through the menu (or toolbar) actions "
"offered within the app."
msgstr ""
"You can also load a project by double clicking on the project file, drag and "
"drop of the file into the GUI or through the menu (or toolbar) actions "
"offered within the app."

#: app_Main.py:9735
#, fuzzy
#| msgid ""
#| "Once an object is available in the Project Tab, by selecting it and then "
#| "focusing on SELECTED TAB (more simpler is to double click the object name "
#| "in the Project Tab, SELECTED TAB will be updated with the object "
#| "properties according to its kind: Gerber, Excellon, Geometry or CNCJob "
#| "object."
msgid ""
"Once an object is available in the Project Tab, by selecting it and then "
"focusing on Properties TAB (more simpler is to double click the object name "
"in the Project Tab, Properties TAB will be updated with the object "
"properties according to its kind: Gerber, Excellon, Geometry or CNCJob "
"object."
msgstr ""
"Once an object is available in the Project Tab, by selecting it and then "
"focusing on SELECTED TAB (more simpler is to double click the object name in "
"the Project Tab, SELECTED TAB will be updated with the object properties "
"according to its kind: Gerber, Excellon, Geometry or CNCJob object."

#: app_Main.py:9739
#, fuzzy
#| msgid ""
#| "If the selection of the object is done on the canvas by single click "
#| "instead, and the SELECTED TAB is in focus, again the object properties "
#| "will be displayed into the Selected Tab. Alternatively, double clicking "
#| "on the object on the canvas will bring the SELECTED TAB and populate it "
#| "even if it was out of focus."
msgid ""
"If the selection of the object is done on the canvas by single click "
"instead, and the Properties TAB is in focus, again the object properties "
"will be displayed into the Properties Tab. Alternatively, double clicking on "
"the object on the canvas will bring the Properties TAB and populate it even "
"if it was out of focus."
msgstr ""
"If the selection of the object is done on the canvas by single click "
"instead, and the SELECTED TAB is in focus, again the object properties will "
"be displayed into the Selected Tab. Alternatively, double clicking on the "
"object on the canvas will bring the SELECTED TAB and populate it even if it "
"was out of focus."

#: app_Main.py:9743
msgid ""
"You can change the parameters in this screen and the flow direction is like "
"this:"
msgstr ""
"You can change the parameters in this screen and the flow direction is like "
"this:"

#: app_Main.py:9744
msgid ""
"Gerber/Excellon Object --> Change Parameter --> Generate Geometry --> "
"Geometry Object --> Add tools (change param in Selected Tab) --> Generate "
"CNCJob --> CNCJob Object --> Verify GCode (through Edit CNC Code) and/or "
"append/prepend to GCode (again, done in SELECTED TAB) --> Save GCode."
msgstr ""
"Gerber/Excellon Object --> Change Parameter --> Generate Geometry --> "
"Geometry Object --> Add tools (change param in Selected Tab) --> Generate "
"CNCJob --> CNCJob Object --> Verify GCode (through Edit CNC Code) and/or "
"append/prepend to GCode (again, done in SELECTED TAB) --> Save GCode."

#: app_Main.py:9748
msgid ""
"A list of key shortcuts is available through an menu entry in Help --> "
"Shortcuts List or through its own key shortcut: <b>F3</b>."
msgstr ""
"A list of key shortcuts is available through an menu entry in Help --> "
"Shortcuts List or through its own key shortcut: <b>F3</b>."

#: app_Main.py:9812
msgid "Failed checking for latest version. Could not connect."
msgstr "Failed checking for latest version. Could not connect."

#: app_Main.py:9819
msgid "Could not parse information about latest version."
msgstr "Could not parse information about latest version."

#: app_Main.py:9829
msgid "FlatCAM is up to date!"
msgstr "FlatCAM is up to date!"

#: app_Main.py:9834
msgid "Newer Version Available"
msgstr "Newer Version Available"

#: app_Main.py:9836
msgid "There is a newer version of FlatCAM available for download:"
msgstr "There is a newer version of FlatCAM available for download:"

#: app_Main.py:9840
msgid "info"
msgstr "info"

#: app_Main.py:9868
msgid ""
"OpenGL canvas initialization failed. HW or HW configuration not supported."
"Change the graphic engine to Legacy(2D) in Edit -> Preferences -> General "
"tab.\n"
"\n"
msgstr ""
"OpenGL canvas initialization failed. HW or HW configuration not supported."
"Change the graphic engine to Legacy(2D) in Edit -> Preferences -> General "
"tab.\n"
"\n"

#: app_Main.py:9946
msgid "All plots disabled."
msgstr "All plots disabled."

#: app_Main.py:9953
msgid "All non selected plots disabled."
msgstr "All non selected plots disabled."

#: app_Main.py:9960
msgid "All plots enabled."
msgstr "All plots enabled."

#: app_Main.py:9966
msgid "Selected plots enabled..."
msgstr "Selected plots enabled..."

#: app_Main.py:9974
msgid "Selected plots disabled..."
msgstr "Selected plots disabled..."

#: app_Main.py:10007
msgid "Enabling plots ..."
msgstr "Enabling plots ..."

#: app_Main.py:10056
msgid "Disabling plots ..."
msgstr "Disabling plots ..."

#: app_Main.py:10079
msgid "Working ..."
msgstr "Working ..."

#: app_Main.py:10188
msgid "Set alpha level ..."
msgstr "Set alpha level ..."

#: app_Main.py:10254
msgid "Saving FlatCAM Project"
msgstr "Saving FlatCAM Project"

#: app_Main.py:10277 app_Main.py:10313
msgid "Project saved to"
msgstr "Project saved to"

#: app_Main.py:10284
msgid "The object is used by another application."
msgstr "The object is used by another application."

#: app_Main.py:10298
msgid "Failed to verify project file"
msgstr "Failed to verify project file"

#: app_Main.py:10298 app_Main.py:10306 app_Main.py:10316
msgid "Retry to save it."
msgstr "Retry to save it."

#: app_Main.py:10306 app_Main.py:10316
msgid "Failed to parse saved project file"
msgstr "Failed to parse saved project file"

#: assets/linux/flatcam-beta.desktop:3
msgid "FlatCAM Beta"
msgstr "FlatCAM Beta"

#: assets/linux/flatcam-beta.desktop:8
msgid "G-Code from GERBERS"
msgstr "G-Code from GERBERS"

#: camlib.py:656
msgid "self.solid_geometry is neither BaseGeometry or list."
msgstr "self.solid_geometry is neither BaseGeometry or list."

#: camlib.py:1049
msgid "Pass"
msgstr "Pass"

#: camlib.py:1071
msgid "Get Exteriors"
msgstr "Get Exteriors"

#: camlib.py:1074
msgid "Get Interiors"
msgstr "Get Interiors"

#: camlib.py:2352
msgid "Failed to mirror. No object selected"
msgstr "Failed to mirror. No object selected"

#: camlib.py:2417
msgid "Object was rotated"
msgstr "Object was rotated"

#: camlib.py:2419
msgid "Failed to rotate. No object selected"
msgstr "Failed to rotate. No object selected"

#: camlib.py:2485
msgid "Object was skewed"
msgstr "Object was skewed"

#: camlib.py:2487
msgid "Failed to skew. No object selected"
msgstr "Failed to skew. No object selected"

#: camlib.py:2563
msgid "Object was buffered"
msgstr "Object was buffered"

#: camlib.py:2565
msgid "Failed to buffer. No object selected"
msgstr "Failed to buffer. No object selected"

#: camlib.py:2814
msgid "There is no such parameter"
msgstr "There is no such parameter"

#: camlib.py:3021 camlib.py:4963 camlib.py:5726
msgid "Indexing geometry before generating G-Code..."
msgstr "Indexing geometry before generating G-Code..."

#: camlib.py:3051 camlib.py:3687 camlib.py:3923
msgid ""
"The Cut Z parameter has positive value. It is the depth value to drill into "
"material.\n"
"The Cut Z parameter needs to have a negative value, assuming it is a typo "
"therefore the app will convert the value to negative. Check the resulting "
"CNC code (Gcode etc)."
msgstr ""
"The Cut Z parameter has positive value. It is the depth value to drill into "
"material.\n"
"The Cut Z parameter needs to have a negative value, assuming it is a typo "
"therefore the app will convert the value to negative. Check the resulting "
"CNC code (Gcode etc)."

#: camlib.py:3058
#, fuzzy
#| msgid "The Cut Z parameter is zero. There will be no cut, skipping file"
msgid "The Cut Z parameter is zero. There will be no cut, aborting"
msgstr "The Cut Z parameter is zero. There will be no cut, skipping file"

#: camlib.py:3186 camlib.py:5274
msgid "The End X,Y format has to be (x, y)."
msgstr ""

#: camlib.py:3262 camlib.py:3771 camlib.py:4004 camlib.py:5037 camlib.py:5365
#: camlib.py:5803
msgid "Starting G-Code for tool with diameter"
msgstr "Starting G-Code for tool with diameter"

#: camlib.py:3387 camlib.py:3892 camlib.py:4125 camlib.py:6743
msgid "G91 coordinates not implemented"
msgstr "G91 coordinates not implemented"

#: camlib.py:3396
#, fuzzy, python-format
#| msgid "Finished G-Code generation"
msgid "Finished G-Code generation for tool: %s"
msgstr "Finished G-Code generation"

#: camlib.py:3446
msgid ""
"The Toolchange X,Y field in Edit -> Preferences has to be in the format (x, "
"y) \n"
"but now there is only one value, not two. "
msgstr ""
"The Toolchange X,Y field in Edit -> Preferences has to be in the format (x, "
"y) \n"
"but now there is only one value, not two. "

#: camlib.py:3458 camlib.py:4872 camlib.py:5634
msgid ""
"The End Move X,Y field in Edit -> Preferences has to be in the format (x, y) "
"but now there is only one value, not two."
msgstr ""
"The End Move X,Y field in Edit -> Preferences has to be in the format (x, y) "
"but now there is only one value, not two."

#: camlib.py:3697 camlib.py:3933 camlib.py:4926 camlib.py:5215 camlib.py:5684
msgid "The Cut Z parameter is zero. There will be no cut, skipping file"
msgstr "The Cut Z parameter is zero. There will be no cut, skipping file"

#: camlib.py:4779
msgid "Finished G-Code generation..."
msgstr "Finished G-Code generation..."

#: camlib.py:4895
msgid ""
"The Toolchange X,Y field in Edit -> Preferences has to be in the format (x, "
"y) \n"
"but now there is only one value, not two."
msgstr ""
"The Toolchange X,Y field in Edit -> Preferences has to be in the format (x, "
"y) \n"
"but now there is only one value, not two."

#: camlib.py:4909 camlib.py:5199 camlib.py:5667
msgid ""
"Cut_Z parameter is None or zero. Most likely a bad combinations of other "
"parameters."
msgstr ""
"Cut_Z parameter is None or zero. Most likely a bad combinations of other "
"parameters."

#: camlib.py:4918 camlib.py:5207 camlib.py:5676
msgid ""
"The Cut Z parameter has positive value. It is the depth value to cut into "
"material.\n"
"The Cut Z parameter needs to have a negative value, assuming it is a typo "
"therefore the app will convert the value to negative.Check the resulting CNC "
"code (Gcode etc)."
msgstr ""
"The Cut Z parameter has positive value. It is the depth value to cut into "
"material.\n"
"The Cut Z parameter needs to have a negative value, assuming it is a typo "
"therefore the app will convert the value to negative.Check the resulting CNC "
"code (Gcode etc)."

#: camlib.py:4931 camlib.py:5220 camlib.py:5690
msgid "Travel Z parameter is None or zero."
msgstr "Travel Z parameter is None or zero."

#: camlib.py:4936 camlib.py:5225 camlib.py:5695
msgid ""
"The Travel Z parameter has negative value. It is the height value to travel "
"between cuts.\n"
"The Z Travel parameter needs to have a positive value, assuming it is a typo "
"therefore the app will convert the value to positive.Check the resulting CNC "
"code (Gcode etc)."
msgstr ""
"The Travel Z parameter has negative value. It is the height value to travel "
"between cuts.\n"
"The Z Travel parameter needs to have a positive value, assuming it is a typo "
"therefore the app will convert the value to positive.Check the resulting CNC "
"code (Gcode etc)."

#: camlib.py:4944 camlib.py:5233 camlib.py:5703
msgid "The Z Travel parameter is zero. This is dangerous, skipping file"
msgstr "The Z Travel parameter is zero. This is dangerous, skipping file"

#: camlib.py:5110 camlib.py:5472 camlib.py:5879
msgid "Finished G-Code generation"
msgstr "Finished G-Code generation"

#: camlib.py:5110 camlib.py:5472
msgid "paths traced"
msgstr "paths traced"

#: camlib.py:5525
msgid ""
"Trying to generate a CNC Job from a Geometry object without solid_geometry."
msgstr ""
"Trying to generate a CNC Job from a Geometry object without solid_geometry."

#: camlib.py:5567
msgid ""
"The Tool Offset value is too negative to use for the current_geometry.\n"
"Raise the value (in module) and try again."
msgstr ""
"The Tool Offset value is too negative to use for the current_geometry.\n"
"Raise the value (in module) and try again."

#: camlib.py:5879
msgid " paths traced."
msgstr " paths traced."

#: camlib.py:5907
msgid "There is no tool data in the SolderPaste geometry."
msgstr "There is no tool data in the SolderPaste geometry."

#: camlib.py:5997
msgid "Finished SolderPaste G-Code generation"
msgstr "Finished SolderPaste G-Code generation"

#: camlib.py:5997
msgid "paths traced."
msgstr "paths traced."

#: camlib.py:6320
msgid "Parsing GCode file. Number of lines"
msgstr "Parsing GCode file. Number of lines"

#: camlib.py:6432
msgid "Creating Geometry from the parsed GCode file. "
msgstr "Creating Geometry from the parsed GCode file. "

#: camlib.py:6489
#, fuzzy
#| msgid "Starting G-Code for tool with diameter"
msgid "Parsing GCode file for tool diameter"
msgstr "Starting G-Code for tool with diameter"

#: camlib.py:6490
#, fuzzy
#| msgid "Nr of slots"
msgid "Number of lines"
msgstr "Nr of slots"

#: camlib.py:6579
#, fuzzy
#| msgid "Creating Geometry from the parsed GCode file. "
msgid "Creating Geometry from the parsed GCode file for tool diameter"
msgstr "Creating Geometry from the parsed GCode file. "

#: camlib.py:7013 camlib.py:7161 camlib.py:7330
msgid "G91 coordinates not implemented ..."
msgstr "G91 coordinates not implemented ..."

#: defaults.py:847
msgid "Could not load defaults file."
msgstr "Could not load defaults file."

#: defaults.py:860
msgid "Failed to parse defaults file."
msgstr "Failed to parse defaults file."

#: tclCommands/TclCommandBbox.py:75 tclCommands/TclCommandNregions.py:74
msgid "Expected GerberObject or GeometryObject, got"
msgstr "Expected GerberObject or GeometryObject, got"

#: tclCommands/TclCommandBounds.py:67 tclCommands/TclCommandBounds.py:71
msgid "Expected a list of objects names separated by comma. Got"
msgstr "Expected a list of objects names separated by comma. Got"

#: tclCommands/TclCommandBounds.py:81
msgid "TclCommand Bounds done."
msgstr "TclCommand Bounds done."

#: tclCommands/TclCommandCopperClear.py:287 tclCommands/TclCommandPaint.py:283
#: tclCommands/TclCommandScale.py:81
msgid "Could not retrieve box object"
msgstr "Could not retrieve box object"

#: tclCommands/TclCommandCopperClear.py:310
msgid "Expected either -box <value> or -all."
msgstr "Expected either -box <value> or -all."

#: tclCommands/TclCommandGeoCutout.py:147
msgid ""
"The name of the object for which cutout is done is missing. Add it and retry."
msgstr ""
"The name of the object for which cutout is done is missing. Add it and retry."

#: tclCommands/TclCommandGeoCutout.py:189
msgid "Gaps value can be only one of: 'lr', 'tb', '2lr', '2tb', 4 or 8."
msgstr "Gaps value can be only one of: 'lr', 'tb', '2lr', '2tb', 4 or 8."

#: tclCommands/TclCommandGeoCutout.py:301
#: tclCommands/TclCommandGeoCutout.py:356
msgid "Any-form Cutout operation finished."
msgstr "Any-form Cutout operation finished."

#: tclCommands/TclCommandGeoCutout.py:362
msgid "Cancelled. Object type is not supported."
msgstr "Cancelled. Object type is not supported."

#: tclCommands/TclCommandHelp.py:75
msgid "Available commands:"
msgstr "Available commands:"

#: tclCommands/TclCommandHelp.py:115
msgid "Type help <command_name> for usage."
msgstr "Type help <command_name> for usage."

#: tclCommands/TclCommandHelp.py:115
msgid "Example: help open_gerber"
msgstr "Example: help open_gerber"

#: tclCommands/TclCommandPaint.py:250 tclCommands/TclCommandPaint.py:256
msgid "Expected a tuple value like -single 3.2,0.1."
msgstr "Expected a tuple value like -single 3.2,0.1."

#: tclCommands/TclCommandPaint.py:276
msgid "Expected -box <value>."
msgstr "Expected -box <value>."

#: tclCommands/TclCommandPaint.py:297
msgid ""
"None of the following args: 'box', 'single', 'all' were used.\n"
"Paint failed."
msgstr ""
"None of the following args: 'box', 'single', 'all' were used.\n"
"Paint failed."

#: tclCommands/TclCommandScale.py:106
msgid ""
"Expected -origin <origin> or -origin <min_bounds> or -origin <center> or - "
"origin 3.0,4.2."
msgstr ""
"Expected -origin <origin> or -origin <min_bounds> or -origin <center> or - "
"origin 3.0,4.2."

#: tclCommands/TclCommandScale.py:119
msgid "Expected -x <value> -y <value>."
msgstr "Expected -x <value> -y <value>."

#: tclCommands/TclCommandSetOrigin.py:95
msgid "Expected a pair of (x, y) coordinates. Got"
msgstr "Expected a pair of (x, y) coordinates. Got"

#: tclCommands/TclCommandSetOrigin.py:101
msgid "Origin set by offsetting all loaded objects with "
msgstr "Origin set by offsetting all loaded objects with "

#: tclCommands/TclCommandSubtractRectangle.py:62
msgid "No Geometry name in args. Provide a name and try again."
msgstr "No Geometry name in args. Provide a name and try again."

#~ msgid "Selected"
#~ msgstr "Selected"

#~ msgid ""
#~ "Cutout operation cannot be done on a multi-geo Geometry.\n"
#~ "Optionally, this Multi-geo Geometry can be converted to Single-geo "
#~ "Geometry,\n"
#~ "and after that perform Cutout."
#~ msgstr ""
#~ "Cutout operation cannot be done on a multi-geo Geometry.\n"
#~ "Optionally, this Multi-geo Geometry can be converted to Single-geo "
#~ "Geometry,\n"
#~ "and after that perform Cutout."

#~ msgid "Generating Film ... Please wait."
#~ msgstr "Generating Film ... Please wait."

#, fuzzy
#~| msgid "Minimal"
#~ msgid "Find Optimal"
#~ msgstr "Minimal"

#~ msgid "Basic Geo Parameters"
#~ msgstr "Basic Geo Parameters"

#~ msgid "Advanced Geo Parameters"
#~ msgstr "Advanced Geo Parameters"

#~ msgid "ReadMe?"
#~ msgstr "ReadMe?"

#~ msgid ""
#~ "Toggle the display of the Gerber Apertures Table.\n"
#~ "When unchecked, it will delete all mark shapes\n"
#~ "that are drawn on canvas."
#~ msgstr ""
#~ "Toggle the display of the Gerber Apertures Table.\n"
#~ "When unchecked, it will delete all mark shapes\n"
#~ "that are drawn on canvas."

#~ msgid ""
#~ "Generate the CNC Job.\n"
#~ "If milling then an additional Geometry object will be created"
#~ msgstr ""
#~ "Generate the CNC Job.\n"
#~ "If milling then an additional Geometry object will be created"

#~ msgid "Travelled dist."
#~ msgstr "Travelled dist."

#~ msgid "Prepend to CNC Code"
#~ msgstr "Prepend to CNC Code"

#~ msgid "Append to CNC Code"
#~ msgstr "Append to CNC Code"

#~ msgid "Toolchange G-Code"
#~ msgstr "Toolchange G-Code"

#~ msgid ""
#~ "Type here any G-Code commands you would\n"
#~ "like to be executed when Toolchange event is encountered.\n"
#~ "This will constitute a Custom Toolchange GCode,\n"
#~ "or a Toolchange Macro.\n"
#~ "The FlatCAM variables are surrounded by '%' symbol.\n"
#~ "\n"
#~ "WARNING: it can be used only with a preprocessor file\n"
#~ "that has 'toolchange_custom' in it's name and this is built\n"
#~ "having as template the 'Toolchange Custom' posprocessor file."
#~ msgstr ""
#~ "Type here any G-Code commands you would\n"
#~ "like to be executed when Toolchange event is encountered.\n"
#~ "This will constitute a Custom Toolchange GCode,\n"
#~ "or a Toolchange Macro.\n"
#~ "The FlatCAM variables are surrounded by '%' symbol.\n"
#~ "\n"
#~ "WARNING: it can be used only with a preprocessor file\n"
#~ "that has 'toolchange_custom' in it's name and this is built\n"
#~ "having as template the 'Toolchange Custom' posprocessor file."

#~ msgid ""
#~ "Type here any G-Code commands you would\n"
#~ "like to be executed when Toolchange event is encountered.\n"
#~ "This will constitute a Custom Toolchange GCode,\n"
#~ "or a Toolchange Macro.\n"
#~ "The FlatCAM variables are surrounded by '%' symbol.\n"
#~ "WARNING: it can be used only with a preprocessor file\n"
#~ "that has 'toolchange_custom' in it's name."
#~ msgstr ""
#~ "Type here any G-Code commands you would\n"
#~ "like to be executed when Toolchange event is encountered.\n"
#~ "This will constitute a Custom Toolchange GCode,\n"
#~ "or a Toolchange Macro.\n"
#~ "The FlatCAM variables are surrounded by '%' symbol.\n"
#~ "WARNING: it can be used only with a preprocessor file\n"
#~ "that has 'toolchange_custom' in it's name."

#~ msgid "Use Toolchange Macro"
#~ msgstr "Use Toolchange Macro"

#~ msgid ""
#~ "Check this box if you want to use\n"
#~ "a Custom Toolchange GCode (macro)."
#~ msgstr ""
#~ "Check this box if you want to use\n"
#~ "a Custom Toolchange GCode (macro)."

#~ msgid ""
#~ "A list of the FlatCAM variables that can be used\n"
#~ "in the Toolchange event.\n"
#~ "They have to be surrounded by the '%' symbol"
#~ msgstr ""
#~ "A list of the FlatCAM variables that can be used\n"
#~ "in the Toolchange event.\n"
#~ "They have to be surrounded by the '%' symbol"

#~ msgid "FlatCAM CNC parameters"
#~ msgstr "FlatCAM CNC parameters"

#~ msgid "tool number"
#~ msgstr "tool number"

#~ msgid "tool diameter"
#~ msgstr "tool diameter"

#~ msgid "for Excellon, total number of drills"
#~ msgstr "for Excellon, total number of drills"

#~ msgid "X coord for Toolchange"
#~ msgstr "X coord for Toolchange"

#~ msgid "Y coord for Toolchange"
#~ msgstr "Y coord for Toolchange"

#~ msgid "Z coord for Toolchange"
#~ msgstr "Z coord for Toolchange"

#~ msgid "depth where to cut"
#~ msgstr "depth where to cut"

#~ msgid "height where to travel"
#~ msgstr "height where to travel"

#~ msgid "the step value for multidepth cut"
#~ msgstr "the step value for multidepth cut"

#~ msgid "the value for the spindle speed"
#~ msgstr "the value for the spindle speed"

#~ msgid "time to dwell to allow the spindle to reach it's set RPM"
#~ msgstr "time to dwell to allow the spindle to reach it's set RPM"

#~ msgid ""
#~ "Opens TAB to view/modify/print G-Code\n"
#~ "file."
#~ msgstr ""
#~ "Opens TAB to view/modify/print G-Code\n"
#~ "file."

#~ msgid ""
#~ "Type here any G-Code commands you would like to be executed when "
#~ "Toolchange event is encountered.\n"
#~ "This will constitute a Custom Toolchange GCode, or a Toolchange Macro.\n"
#~ "The FlatCAM variables are surrounded by '%' symbol.\n"
#~ "WARNING: it can be used only with a preprocessor file that has "
#~ "'toolchange_custom' in it's name."
#~ msgstr ""
#~ "Type here any G-Code commands you would like to be executed when "
#~ "Toolchange event is encountered.\n"
#~ "This will constitute a Custom Toolchange GCode, or a Toolchange Macro.\n"
#~ "The FlatCAM variables are surrounded by '%' symbol.\n"
#~ "WARNING: it can be used only with a preprocessor file that has "
#~ "'toolchange_custom' in it's name."

#~ msgid "Z depth for the cut"
#~ msgstr "Z depth for the cut"

#~ msgid "Z height for travel"
#~ msgstr "Z height for travel"

#~ msgid "dwelltime = time to dwell to allow the spindle to reach it's set RPM"
#~ msgstr ""
#~ "dwelltime = time to dwell to allow the spindle to reach it's set RPM"

#~ msgid "Excellon Optimization"
#~ msgstr "Excellon Optimization"

#~ msgid "Gcode"
#~ msgstr "Gcode"

#~ msgid ""
#~ "Choose what to use for GCode generation:\n"
#~ "'Drills', 'Slots' or 'Both'.\n"
#~ "When choosing 'Slots' or 'Both', slots will be\n"
#~ "converted to drills."
#~ msgstr ""
#~ "Choose what to use for GCode generation:\n"
#~ "'Drills', 'Slots' or 'Both'.\n"
#~ "When choosing 'Slots' or 'Both', slots will be\n"
#~ "converted to drills."

#~ msgid "Display Hover Shape"
#~ msgstr "Display Hover Shape"

#~ msgid "A list of Geometry Editor parameters."
#~ msgstr "A list of Geometry Editor parameters."

#~ msgid ""
#~ "Toggle the display of the Gerber Apertures Table.\n"
#~ "Also, on hide, it will delete all mark shapes\n"
#~ "that are drawn on canvas."
#~ msgstr ""
#~ "Toggle the display of the Gerber Apertures Table.\n"
#~ "Also, on hide, it will delete all mark shapes\n"
#~ "that are drawn on canvas."

#~ msgid ""
#~ "The axis should pass through a <b>point</b> or cut\n"
#~ " a specified <b>box</b> (in a FlatCAM object) through \n"
#~ "the center."
#~ msgstr ""
#~ "The axis should pass through a <b>point</b> or cut\n"
#~ " a specified <b>box</b> (in a FlatCAM object) through \n"
#~ "the center."

#~ msgid ""
#~ "G-code does not have a G94 code and we will not include the code in the "
#~ "'Prepend to GCode' text box"
#~ msgstr ""
#~ "G-code does not have a G94 code and we will not include the code in the "
#~ "'Prepend to GCode' text box"

#~ msgid "Cancelled. The Toolchange Custom code is enabled but it's empty."
#~ msgstr "Cancelled. The Toolchange Custom code is enabled but it's empty."

#~ msgid "Toolchange G-code was replaced by a custom code."
#~ msgstr "Toolchange G-code was replaced by a custom code."

#~ msgid ""
#~ "The used preprocessor file has to have in it's name: 'toolchange_custom'"
#~ msgstr ""
#~ "The used preprocessor file has to have in it's name: 'toolchange_custom'"

#~ msgid "There is no preprocessor file."
#~ msgstr "There is no preprocessor file."

#~ msgid ""
#~ "Excellon.create_geometry() -> a drill location was skipped due of not "
#~ "having a tool associated.\n"
#~ "Check the resulting GCode."
#~ msgstr ""
#~ "Excellon.create_geometry() -> a drill location was skipped due of not "
#~ "having a tool associated.\n"
#~ "Check the resulting GCode."

#~ msgid "A. Automatic Bridge Gaps"
#~ msgstr "A. Automatic Bridge Gaps"

#~ msgid "Generate Freeform Geometry"
#~ msgstr "Generate Freeform Geometry"

#~ msgid "Generate Rectangular Geometry"
#~ msgstr "Generate Rectangular Geometry"

#~ msgid "Added manual Bridge Gap."
#~ msgstr "Added manual Bridge Gap."

#~ msgid "Gerber to be mirrored"
#~ msgstr "Gerber to be mirrored"

#~ msgid "Excellon Object to be mirrored."
#~ msgstr "Excellon Object to be mirrored."

#~ msgid "Geometry Obj to be mirrored."
#~ msgstr "Geometry Obj to be mirrored."

#~ msgid "Mirror Parameters"
#~ msgstr "Mirror Parameters"

#~ msgid "Mirror Axis"
#~ msgstr "Mirror Axis"

#~ msgid "was mirrored"
#~ msgstr "was mirrored"

#~ msgid "There is no Geometry object loaded ..."
#~ msgstr "There is no Geometry object loaded ..."

#~ msgid "Image to PCB"
#~ msgstr "Image to PCB"

#~ msgid "Generate Isolation Geometry"
#~ msgstr "Generate Isolation Geometry"

#~ msgid "Wrong Tool Dia value format entered, use a number."
#~ msgstr "Wrong Tool Dia value format entered, use a number."

#~ msgid ""
#~ "- 'Area Selection' - left mouse click to start selection of the area to "
#~ "be painted.\n"
#~ "Keeping a modifier key pressed (CTRL or SHIFT) will allow to add multiple "
#~ "areas.\n"
#~ "- 'All Polygons' - the Paint will start after click.\n"
#~ "- 'Reference Object' -  will do non copper clearing within the area\n"
#~ "specified by another object."
#~ msgstr ""
#~ "- 'Area Selection' - left mouse click to start selection of the area to "
#~ "be painted.\n"
#~ "Keeping a modifier key pressed (CTRL or SHIFT) will allow to add multiple "
#~ "areas.\n"
#~ "- 'All Polygons' - the Paint will start after click.\n"
#~ "- 'Reference Object' -  will do non copper clearing within the area\n"
#~ "specified by another object."

#~ msgid "Paint Single failed."
#~ msgstr "Paint Single failed."

#~ msgid "Paint Single Done."
#~ msgstr "Paint Single Done."

#~ msgid "Polygon Paint started ..."
#~ msgstr "Polygon Paint started ..."

#~ msgid "Painting polygons..."
#~ msgstr "Painting polygons..."

#~ msgid "Paint All Done."
#~ msgstr "Paint All Done."

#~ msgid "Paint All with Rest-Machining done."
#~ msgstr "Paint All with Rest-Machining done."

#~ msgid "Paint Poly All Done."
#~ msgstr "Paint Poly All Done."

#~ msgid "Paint Area Done."
#~ msgstr "Paint Area Done."

#~ msgid "Paint Area failed."
#~ msgstr "Paint Area failed."

#~ msgid "Paint Poly Area Done."
#~ msgstr "Paint Poly Area Done."

#~ msgid "Import 2-file Excellon"
#~ msgstr "Import 2-file Excellon"

#~ msgid "Data"
#~ msgstr "Data"

#~ msgid "If you like or use this program you can make a donation"
#~ msgstr "If you like or use this program you can make a donation"

#, python-format
#~ msgid ""
#~ "You don't have to make a donation %s, and it is totally optional but:"
#~ msgstr ""
#~ "You don't have to make a donation %s, and it is totally optional but:"

#~ msgid "it will be welcomed with joy"
#~ msgstr "it will be welcomed with joy"

#~ msgid "it will give me a reason to continue"
#~ msgstr "it will give me a reason to continue"

#~ msgid "Could not export Gerber file."
#~ msgstr "Could not export Gerber file."

#~ msgid "Expected a Geometry, got"
#~ msgstr "Expected a Geometry, got"

#~ msgid "Angle:"
#~ msgstr "Angle:"

#~ msgid ""
#~ "Rotate the selected shape(s).\n"
#~ "The point of reference is the middle of\n"
#~ "the bounding box for all selected shapes."
#~ msgstr ""
#~ "Rotate the selected shape(s).\n"
#~ "The point of reference is the middle of\n"
#~ "the bounding box for all selected shapes."

#~ msgid "Angle X:"
#~ msgstr "Angle X:"

#~ msgid ""
#~ "Skew/shear the selected shape(s).\n"
#~ "The point of reference is the middle of\n"
#~ "the bounding box for all selected shapes."
#~ msgstr ""
#~ "Skew/shear the selected shape(s).\n"
#~ "The point of reference is the middle of\n"
#~ "the bounding box for all selected shapes."

#~ msgid "Angle Y:"
#~ msgstr "Angle Y:"

#~ msgid "Factor X:"
#~ msgstr "Factor X:"

#~ msgid ""
#~ "Scale the selected shape(s).\n"
#~ "The point of reference depends on \n"
#~ "the Scale reference checkbox state."
#~ msgstr ""
#~ "Scale the selected shape(s).\n"
#~ "The point of reference depends on \n"
#~ "the Scale reference checkbox state."

#~ msgid "Factor Y:"
#~ msgstr "Factor Y:"

#~ msgid ""
#~ "Scale the selected shape(s)\n"
#~ "using the Scale Factor X for both axis."
#~ msgstr ""
#~ "Scale the selected shape(s)\n"
#~ "using the Scale Factor X for both axis."

#~ msgid "Scale Reference"
#~ msgstr "Scale Reference"

#~ msgid ""
#~ "Scale the selected shape(s)\n"
#~ "using the origin reference when checked,\n"
#~ "and the center of the biggest bounding box\n"
#~ "of the selected shapes when unchecked."
#~ msgstr ""
#~ "Scale the selected shape(s)\n"
#~ "using the origin reference when checked,\n"
#~ "and the center of the biggest bounding box\n"
#~ "of the selected shapes when unchecked."

#~ msgid "Value X:"
#~ msgstr "Value X:"

#~ msgid "Value for Offset action on X axis."
#~ msgstr "Value for Offset action on X axis."

#~ msgid ""
#~ "Offset the selected shape(s).\n"
#~ "The point of reference is the middle of\n"
#~ "the bounding box for all selected shapes.\n"
#~ msgstr ""
#~ "Offset the selected shape(s).\n"
#~ "The point of reference is the middle of\n"
#~ "the bounding box for all selected shapes.\n"

#~ msgid "Value Y:"
#~ msgstr "Value Y:"

#~ msgid "Value for Offset action on Y axis."
#~ msgstr "Value for Offset action on Y axis."

#~ msgid ""
#~ "Flip the selected shape(s) over the X axis.\n"
#~ "Does not create a new shape."
#~ msgstr ""
#~ "Flip the selected shape(s) over the X axis.\n"
#~ "Does not create a new shape."

#~ msgid "Ref Pt"
#~ msgstr "Ref Pt"

#~ msgid ""
#~ "Flip the selected shape(s)\n"
#~ "around the point in Point Entry Field.\n"
#~ "\n"
#~ "The point coordinates can be captured by\n"
#~ "left click on canvas together with pressing\n"
#~ "SHIFT key. \n"
#~ "Then click Add button to insert coordinates.\n"
#~ "Or enter the coords in format (x, y) in the\n"
#~ "Point Entry field and click Flip on X(Y)"
#~ msgstr ""
#~ "Flip the selected shape(s)\n"
#~ "around the point in Point Entry Field.\n"
#~ "\n"
#~ "The point coordinates can be captured by\n"
#~ "left click on canvas together with pressing\n"
#~ "SHIFT key. \n"
#~ "Then click Add button to insert coordinates.\n"
#~ "Or enter the coords in format (x, y) in the\n"
#~ "Point Entry field and click Flip on X(Y)"

#~ msgid "Point:"
#~ msgstr "Point:"

#~ msgid ""
#~ "Coordinates in format (x, y) used as reference for mirroring.\n"
#~ "The 'x' in (x, y) will be used when using Flip on X and\n"
#~ "the 'y' in (x, y) will be used when using Flip on Y."
#~ msgstr ""
#~ "Coordinates in format (x, y) used as reference for mirroring.\n"
#~ "The 'x' in (x, y) will be used when using Flip on X and\n"
#~ "the 'y' in (x, y) will be used when using Flip on Y."

#~ msgid ""
#~ "The point coordinates can be captured by\n"
#~ "left click on canvas together with pressing\n"
#~ "SHIFT key. Then click Add button to insert."
#~ msgstr ""
#~ "The point coordinates can be captured by\n"
#~ "left click on canvas together with pressing\n"
#~ "SHIFT key. Then click Add button to insert."

#~ msgid "No shape selected. Please Select a shape to rotate!"
#~ msgstr "No shape selected. Please Select a shape to rotate!"

#~ msgid "No shape selected. Please Select a shape to flip!"
#~ msgstr "No shape selected. Please Select a shape to flip!"

#~ msgid "No shape selected. Please Select a shape to shear/skew!"
#~ msgstr "No shape selected. Please Select a shape to shear/skew!"

#~ msgid "No shape selected. Please Select a shape to scale!"
#~ msgstr "No shape selected. Please Select a shape to scale!"

#~ msgid "No shape selected. Please Select a shape to offset!"
#~ msgstr "No shape selected. Please Select a shape to offset!"

#~ msgid ""
#~ "Scale the selected object(s)\n"
#~ "using the Scale_X factor for both axis."
#~ msgstr ""
#~ "Scale the selected object(s)\n"
#~ "using the Scale_X factor for both axis."

#~ msgid ""
#~ "Scale the selected object(s)\n"
#~ "using the origin reference when checked,\n"
#~ "and the center of the biggest bounding box\n"
#~ "of the selected objects when unchecked."
#~ msgstr ""
#~ "Scale the selected object(s)\n"
#~ "using the origin reference when checked,\n"
#~ "and the center of the biggest bounding box\n"
#~ "of the selected objects when unchecked."

#~ msgid "Mirror Reference"
#~ msgstr "Mirror Reference"

#~ msgid ""
#~ "Flip the selected object(s)\n"
#~ "around the point in Point Entry Field.\n"
#~ "\n"
#~ "The point coordinates can be captured by\n"
#~ "left click on canvas together with pressing\n"
#~ "SHIFT key. \n"
#~ "Then click Add button to insert coordinates.\n"
#~ "Or enter the coords in format (x, y) in the\n"
#~ "Point Entry field and click Flip on X(Y)"
#~ msgstr ""
#~ "Flip the selected object(s)\n"
#~ "around the point in Point Entry Field.\n"
#~ "\n"
#~ "The point coordinates can be captured by\n"
#~ "left click on canvas together with pressing\n"
#~ "SHIFT key. \n"
#~ "Then click Add button to insert coordinates.\n"
#~ "Or enter the coords in format (x, y) in the\n"
#~ "Point Entry field and click Flip on X(Y)"

#~ msgid ""
#~ "Coordinates in format (x, y) used as reference for mirroring.\n"
#~ "The 'x' in (x, y) will be used when using Flip on X and\n"
#~ "the 'y' in (x, y) will be used when using Flip on Y and"
#~ msgstr ""
#~ "Coordinates in format (x, y) used as reference for mirroring.\n"
#~ "The 'x' in (x, y) will be used when using Flip on X and\n"
#~ "the 'y' in (x, y) will be used when using Flip on Y and"

#~ msgid "Ref. Point"
#~ msgstr "Ref. Point"

#~ msgid "FlatCAM Object"
#~ msgstr "FlatCAM Object"

#~ msgid ""
#~ "Choose which tool to use for Gerber isolation:\n"
#~ "'Circular' or 'V-shape'.\n"
#~ "When the 'V-shape' is selected then the tool\n"
#~ "diameter will depend on the chosen cut depth."
#~ msgstr ""
#~ "Choose which tool to use for Gerber isolation:\n"
#~ "'Circular' or 'V-shape'.\n"
#~ "When the 'V-shape' is selected then the tool\n"
#~ "diameter will depend on the chosen cut depth."

#~ msgid "V-Shape"
#~ msgstr "V-Shape"

#~ msgid ""
#~ "Diameter of the cutting tool.\n"
#~ "If you want to have an isolation path\n"
#~ "inside the actual shape of the Gerber\n"
#~ "feature, use a negative value for\n"
#~ "this parameter."
#~ msgstr ""
#~ "Diameter of the cutting tool.\n"
#~ "If you want to have an isolation path\n"
#~ "inside the actual shape of the Gerber\n"
#~ "feature, use a negative value for\n"
#~ "this parameter."

#~ msgid "Pass overlap"
#~ msgstr "Pass overlap"

#~ msgid "Scope"
#~ msgstr "Scope"

#~ msgid "Clear N-copper"
#~ msgstr "Clear N-copper"

#~ msgid "Board cutout"
#~ msgstr "Board cutout"

#~ msgid ""
#~ "Add a new tool to the Tool Table\n"
#~ "with the specified diameter."
#~ msgstr ""
#~ "Add a new tool to the Tool Table\n"
#~ "with the specified diameter."

#~ msgid "Excellon Object Color"
#~ msgstr "Excellon Object Color"

#~ msgid "Geometry Object Color"
#~ msgstr "Geometry Object Color"

#~ msgid "Exterior"
#~ msgstr "Exterior"

#~ msgid "Gerber Object Color"
#~ msgstr "Gerber Object Color"

#~ msgid "Combine Passes"
#~ msgstr "Combine Passes"

#~ msgid "Rest Machining"
#~ msgstr "Rest Machining"

#~ msgid "NCC Plotting"
#~ msgstr "NCC Plotting"

#~ msgid "All Polygons"
#~ msgstr "All Polygons"

#~ msgid "Paint Plotting"
#~ msgstr "Paint Plotting"

#~ msgid ""
#~ "- 'Normal' -  normal plotting, done at the end of the Paint job\n"
#~ "- 'Progressive' - after each shape is generated it will be plotted."
#~ msgstr ""
#~ "- 'Normal' -  normal plotting, done at the end of the Paint job\n"
#~ "- 'Progressive' - after each shape is generated it will be plotted."

#~ msgid "Export Machine Code ..."
#~ msgstr "Export Machine Code ..."

#~ msgid "Export Machine Code cancelled ..."
#~ msgstr "Export Machine Code cancelled ..."

#~ msgid "Machine Code file saved to"
#~ msgstr "Machine Code file saved to"

#~ msgid "GCode Parameters"
#~ msgstr "GCode Parameters"

#~| msgid "Selection"
#~ msgid "PreSelection"
#~ msgstr "PreSelection"

#~ msgid "Copper Gerber"
#~ msgstr "Copper Gerber"

#~ msgid "QRCode Parameters"
#~ msgstr "QRCode Parameters"

#~ msgid "Gerber Files"
#~ msgstr "Gerber Files"

#~ msgid "Excellon Objects"
#~ msgstr "Excellon Objects"

#~ msgid "Gerber Solder paste object.                        "
#~ msgstr "Gerber Solder paste object.                        "

#~ msgid "Gerber Objects"
#~ msgstr "Gerber Objects"

#~ msgid "Geometry Objects"
#~ msgstr "Geometry Objects"

#~ msgid "Processing geometry from Subtractor Gerber object."
#~ msgstr "Processing geometry from Subtractor Gerber object."

#~ msgid "Parsing geometry for aperture"
#~ msgstr "Parsing geometry for aperture"

#~ msgid "Export FlatCAM Bookmarks"
#~ msgstr "Export FlatCAM Bookmarks"

#~ msgid "Import FlatCAM Bookmarks"
#~ msgstr "Import FlatCAM Bookmarks"

#~ msgid "Unifying Geometry from parsed Geometry segments"
#~ msgstr "Unifying Geometry from parsed Geometry segments"

#~ msgid "./assets/icon.png"
#~ msgstr "./assets/icon.png"

#~ msgid "New Blank Geometry"
#~ msgstr "New Blank Geometry"

#~ msgid "New Blank Gerber"
#~ msgstr "New Blank Gerber"

#~ msgid "New Blank Excellon"
#~ msgstr "New Blank Excellon"

#~| msgid "Clearance"
#~ msgid "Clear areas"
#~ msgstr "Clear areas"

#~ msgid "Apply Theme"
#~ msgstr "Apply Theme"

#~ msgid ""
#~ "Select a theme for FlatCAM.\n"
#~ "It will theme the plot area.\n"
#~ "The application will restart after change."
#~ msgstr ""
#~ "Select a theme for FlatCAM.\n"
#~ "It will theme the plot area.\n"
#~ "The application will restart after change."

#~ msgid "Film Object"
#~ msgstr "Film Object"

#~ msgid "Object for which to create the film."
#~ msgstr "Object for which to create the film."

#~ msgid "Box Object"
#~ msgstr "Box Object"

#~ msgid ""
#~ "The actual object that is used as container for the\n"
#~ " selected object for which we create the film.\n"
#~ "Usually it is the PCB outline but it can be also the\n"
#~ "same object for which the film is created."
#~ msgstr ""
#~ "The actual object that is used as container for the\n"
#~ " selected object for which we create the film.\n"
#~ "Usually it is the PCB outline but it can be also the\n"
#~ "same object for which the film is created."

#~ msgid "Expected -x <value> and -y <value>."
#~ msgstr "Expected -x <value> and -y <value>."

#~ msgid "Could not load factory defaults file."
#~ msgstr "Could not load factory defaults file."

#~ msgid "Failed to parse factory defaults file."
#~ msgstr "Failed to parse factory defaults file."

#~ msgid "Could not load preferences file."
#~ msgstr "Could not load preferences file."

#~ msgid "Failed to write factory defaults to file."
#~ msgstr "Failed to write factory defaults to file."

#~ msgid "Factory defaults saved."
#~ msgstr "Factory defaults saved."

#~ msgid ""
#~ "The Tool Type (TT) can be:<BR>- <B>Circular</B> with 1 ... 4 teeth -> it "
#~ "is informative only. Being circular, <BR>the cut width in material is "
#~ "exactly the tool diameter.<BR>- <B>Ball</B> -> informative only and make "
#~ "reference to the Ball type endmill.<BR>- <B>V-Shape</B> -> it will "
#~ "disable de Z-Cut parameter in the resulting geometry UI form and enable "
#~ "two additional UI form fields in the resulting geometry: V-Tip Dia and V-"
#~ "Tip Angle. Adjusting those two values will adjust the Z-Cut parameter "
#~ "such as the cut width into material will be equal with the value in the "
#~ "Tool Diameter column of this table.<BR>Choosing the <B>V-Shape</B> Tool "
#~ "Type automatically will select the Operation Type in the resulting "
#~ "geometry as Isolation."
#~ msgstr ""
#~ "The Tool Type (TT) can be:<BR>- <B>Circular</B> with 1 ... 4 teeth -> it "
#~ "is informative only. Being circular, <BR>the cut width in material is "
#~ "exactly the tool diameter.<BR>- <B>Ball</B> -> informative only and make "
#~ "reference to the Ball type endmill.<BR>- <B>V-Shape</B> -> it will "
#~ "disable de Z-Cut parameter in the resulting geometry UI form and enable "
#~ "two additional UI form fields in the resulting geometry: V-Tip Dia and V-"
#~ "Tip Angle. Adjusting those two values will adjust the Z-Cut parameter "
#~ "such as the cut width into material will be equal with the value in the "
#~ "Tool Diameter column of this table.<BR>Choosing the <B>V-Shape</B> Tool "
#~ "Type automatically will select the Operation Type in the resulting "
#~ "geometry as Isolation."

#~ msgid "e_fr_probe"
#~ msgstr "e_fr_probe"

#~ msgid ""
#~ " Could not generate punched hole Gerber because the punch hole sizeis "
#~ "bigger than some of the apertures in the Gerber object."
#~ msgstr ""
#~ " Could not generate punched hole Gerber because the punch hole sizeis "
#~ "bigger than some of the apertures in the Gerber object."

#~ msgid "Paint Tool. Normal painting all task started."
#~ msgstr "Paint Tool. Normal painting all task started."

#~ msgid "Rest machining painting all task started."
#~ msgstr "Rest machining painting all task started."

#~| msgid "Painting polygon at location"
#~ msgid "Painting polygons with method: lines."
#~ msgstr "Painting polygons with method: lines."

#~| msgid "Normal painting polygon task started."
#~ msgid "Failed. Painting polygons with method: seed."
#~ msgstr "Failed. Painting polygons with method: seed."

#~| msgid "Normal painting polygon task started."
#~ msgid "Failed. Painting polygons with method: standard."
#~ msgstr "Failed. Painting polygons with method: standard."

#~ msgid ""
#~ "Could not do Paint All. Try a different combination of parameters. Or a "
#~ "different Method of paint"
#~ msgstr ""
#~ "Could not do Paint All. Try a different combination of parameters. Or a "
#~ "different Method of paint"

#~| msgid "Paint Tool. Normal painting all task started."
#~ msgid "Paint Tool. Normal painting area task started."
#~ msgstr "Paint Tool. Normal painting area task started."

#~ msgid "Rest machining painting area task started."
#~ msgstr "Rest machining painting area task started."

#~ msgid "Executing Tcl Script ..."
#~ msgstr "Executing Tcl Script ..."

#~ msgid "Open cancelled."
#~ msgstr "Open cancelled."

#~ msgid "Preferences default restore was cancelled."
#~ msgstr "Preferences default restore was cancelled."

#~ msgid "FlatCAM preferences import cancelled."
#~ msgstr "FlatCAM preferences import cancelled."

#~ msgid "FlatCAM preferences export cancelled."
#~ msgstr "FlatCAM preferences export cancelled."

#~ msgid "Multigeo. Geometry merging finished"
#~ msgstr "Multigeo. Geometry merging finished"

#~ msgid "Units conversion cancelled."
#~ msgstr "Units conversion cancelled."

#~ msgid "Open Gerber cancelled."
#~ msgstr "Open Gerber cancelled."

#~ msgid " Open Excellon cancelled."
#~ msgstr " Open Excellon cancelled."

#~ msgid "Open G-Code cancelled."
#~ msgstr "Open G-Code cancelled."

#~ msgid "Open Project cancelled."
#~ msgstr "Open Project cancelled."

#~ msgid "Open HPGL2 file cancelled."
#~ msgstr "Open HPGL2 file cancelled."

#~ msgid "Open Config cancelled."
#~ msgstr "Open Config cancelled."

#~ msgid " Export SVG cancelled."
#~ msgstr " Export SVG cancelled."

#~ msgid "No object selected. Please select an Gerber object to export."
#~ msgstr "No object selected. Please select an Gerber object to export."

#~ msgid "Save Gerber source file cancelled."
#~ msgstr "Save Gerber source file cancelled."

#~ msgid "No object selected. Please select an Script object to export."
#~ msgstr "No object selected. Please select an Script object to export."

#~ msgid "Save Script source file cancelled."
#~ msgstr "Save Script source file cancelled."

#~ msgid "No object selected. Please select an Document object to export."
#~ msgstr "No object selected. Please select an Document object to export."

#~ msgid "Save Document source file cancelled."
#~ msgstr "Save Document source file cancelled."

#~ msgid "No object selected. Please select an Excellon object to export."
#~ msgstr "No object selected. Please select an Excellon object to export."

#~ msgid "Saving Excellon source file cancelled."
#~ msgstr "Saving Excellon source file cancelled."

#~ msgid "No object selected. Please Select an Excellon object to export."
#~ msgstr "No object selected. Please Select an Excellon object to export."

#~ msgid "Export Excellon cancelled."
#~ msgstr "Export Excellon cancelled."

#~ msgid "No object selected. Please Select an Gerber object to export."
#~ msgstr "No object selected. Please Select an Gerber object to export."

#~ msgid "Export Gerber cancelled."
#~ msgstr "Export Gerber cancelled."

#~ msgid "Export DXF cancelled."
#~ msgstr "Export DXF cancelled."

#~ msgid "Open SVG cancelled."
#~ msgstr "Open SVG cancelled."

#~ msgid "Open DXF cancelled."
#~ msgstr "Open DXF cancelled."

#~ msgid "Open TCL script cancelled."
#~ msgstr "Open TCL script cancelled."

#~ msgid "Run TCL script cancelled."
#~ msgstr "Run TCL script cancelled."

#~ msgid "Save Project cancelled."
#~ msgstr "Save Project cancelled."

#~ msgid "Save Object PDF cancelled."
#~ msgstr "Save Object PDF cancelled."

#~ msgid "FlatCAM bookmarks export cancelled."
#~ msgstr "FlatCAM bookmarks export cancelled."

#~ msgid "FlatCAM bookmarks import cancelled."
#~ msgstr "FlatCAM bookmarks import cancelled."

#~ msgid "FlatCAM Tools DB export cancelled."
#~ msgstr "FlatCAM Tools DB export cancelled."

#~ msgid "FlatCAM Tools DB import cancelled."
#~ msgstr "FlatCAM Tools DB import cancelled."

#~ msgid ""
#~ "Wrong value format for self.defaults[\"z_pdepth\"] or self."
#~ "options[\"z_pdepth\"]"
#~ msgstr ""
#~ "Wrong value format for self.defaults[\"z_pdepth\"] or self."
#~ "options[\"z_pdepth\"]"

#~ msgid ""
#~ "Wrong value format for self.defaults[\"feedrate_probe\"] or self."
#~ "options[\"feedrate_probe\"]"
#~ msgstr ""
#~ "Wrong value format for self.defaults[\"feedrate_probe\"] or self."
#~ "options[\"feedrate_probe\"]"

#~ msgid "Starting G-Code..."
#~ msgstr "Starting G-Code..."

#~ msgid ""
#~ "Algorithm to paint the polygon:<BR><B>Standard</B>: Fixed step inwards."
#~ "<BR><B>Seed-based</B>: Outwards from seed."
#~ msgstr ""
#~ "Algorithm to paint the polygon:<BR><B>Standard</B>: Fixed step inwards."
#~ "<BR><B>Seed-based</B>: Outwards from seed."

#~ msgid "Seed-based"
#~ msgstr "Seed-based"

#~ msgid "Straight lines"
#~ msgstr "Straight lines"

#~ msgid "Paint cancelled. No shape selected."
#~ msgstr "Paint cancelled. No shape selected."

#~ msgid "Transformation cancelled. No shape selected."
#~ msgstr "Transformation cancelled. No shape selected."

#~ msgid "Buffer cancelled. No shape selected."
#~ msgstr "Buffer cancelled. No shape selected."

#~ msgid "Export Code cancelled."
#~ msgstr "Export Code cancelled."

#~ msgid "&Save Project ..."
#~ msgstr "&Save Project ..."

#~ msgid "Save Project C&opy ..."
#~ msgstr "Save Project C&opy ..."

#~ msgid "Change the size of the object."
#~ msgstr "Change the size of the object."

#~ msgid "Change the position of this object."
#~ msgstr "Change the position of this object."

#~ msgid "Vector"
#~ msgstr "Vector"

#~ msgid ""
#~ "Create a CNC Job object\n"
#~ "for this drill object."
#~ msgstr ""
#~ "Create a CNC Job object\n"
#~ "for this drill object."

#~ msgid ""
#~ "Choose what to use for GCode generation:\n"
#~ "'Drills', 'Slots' or 'Both'.\n"
#~ "When choosing 'Slots' or 'Both', slots will be\n"
#~ "converted to a series of drills."
#~ msgstr ""
#~ "Choose what to use for GCode generation:\n"
#~ "'Drills', 'Slots' or 'Both'.\n"
#~ "When choosing 'Slots' or 'Both', slots will be\n"
#~ "converted to a series of drills."

#~ msgid "Generate the CNC Job."
#~ msgstr "Generate the CNC Job."

#~ msgid "Add Tool from DataBase"
#~ msgstr "Add Tool from DataBase"

#~ msgid "Select a theme for FlatCAM."
#~ msgstr "Select a theme for FlatCAM."

#~ msgid "Conv."
#~ msgstr "Conv."

#~ msgid "Diameters of the cutting tools, separated by ','"
#~ msgstr "Diameters of the cutting tools, separated by ','"

#~ msgid "Tools dia"
#~ msgstr "Tools dia"

#~ msgid "The new tool diameter (cut width) to add in the tool table."
#~ msgstr "The new tool diameter (cut width) to add in the tool table."

#~ msgid ""
#~ "Algorithm for non-copper clearing:<BR><B>Standard</B>: Fixed step inwards."
#~ "<BR><B>Seed-based</B>: Outwards from seed.<BR><B>Line-based</B>: Parallel "
#~ "lines."
#~ msgstr ""
#~ "Algorithm for non-copper clearing:<BR><B>Standard</B>: Fixed step inwards."
#~ "<BR><B>Seed-based</B>: Outwards from seed.<BR><B>Line-based</B>: Parallel "
#~ "lines."

#~ msgid "Area"
#~ msgstr "Area"

#~ msgid "Ref"
#~ msgstr "Ref"

#~ msgid ""
#~ "- 'Itself' -  the non copper clearing extent\n"
#~ "is based on the object that is copper cleared.\n"
#~ "- 'Area Selection' - left mouse click to start selection of the area to "
#~ "be painted.\n"
#~ "Keeping a modifier key pressed (CTRL or SHIFT) will allow to add multiple "
#~ "areas.\n"
#~ "- 'Reference Object' -  will do non copper clearing within the area\n"
#~ "specified by another object."
#~ msgstr ""
#~ "- 'Itself' -  the non copper clearing extent\n"
#~ "is based on the object that is copper cleared.\n"
#~ "- 'Area Selection' - left mouse click to start selection of the area to "
#~ "be painted.\n"
#~ "Keeping a modifier key pressed (CTRL or SHIFT) will allow to add multiple "
#~ "areas.\n"
#~ "- 'Reference Object' -  will do non copper clearing within the area\n"
#~ "specified by another object."

#~ msgid "Sel"
#~ msgstr "Sel"

#~ msgid "Diameters of nozzle tools, separated by ','"
#~ msgstr "Diameters of nozzle tools, separated by ','"

#~ msgid "Reference Gerber"
#~ msgstr "Reference Gerber"

#~ msgid "Reference Excellon"
#~ msgstr "Reference Excellon"

#~ msgid "Reference Geometry"
#~ msgstr "Reference Geometry"

#~ msgid "Point/Box Reference"
#~ msgstr "Point/Box Reference"

#~ msgid ""
#~ "If 'Point' is selected above it store the coordinates (x, y) through "
#~ "which\n"
#~ "the mirroring axis passes.\n"
#~ "If 'Box' is selected above, select here a FlatCAM object (Gerber, Exc or "
#~ "Geo).\n"
#~ "Through the center of this object pass the mirroring axis selected above."
#~ msgstr ""
#~ "If 'Point' is selected above it store the coordinates (x, y) through "
#~ "which\n"
#~ "the mirroring axis passes.\n"
#~ "If 'Box' is selected above, select here a FlatCAM object (Gerber, Exc or "
#~ "Geo).\n"
#~ "Through the center of this object pass the mirroring axis selected above."

#~ msgid "Alignment Drill Diameter"
#~ msgstr "Alignment Drill Diameter"

#~ msgid ""
#~ "'Point' coordinates missing. Using Origin (0, 0) as mirroring reference."
#~ msgstr ""
#~ "'Point' coordinates missing. Using Origin (0, 0) as mirroring reference."

#~ msgid "Export positive film cancelled."
#~ msgstr "Export positive film cancelled."

#~ msgid "Export negative film cancelled."
#~ msgstr "Export negative film cancelled."

#~ msgid "Move action cancelled."
#~ msgstr "Move action cancelled."

#~ msgid "Create Paint Geometry"
#~ msgstr "Create Paint Geometry"

#~ msgid "Paint Tool. Reading parameters."
#~ msgstr "Paint Tool. Reading parameters."

#~ msgid "Properties Tool was not displayed. No object selected."
#~ msgstr "Properties Tool was not displayed. No object selected."

#~ msgid " Export PNG cancelled."
#~ msgstr " Export PNG cancelled."

#~ msgid "Adding Nozzle tool cancelled. Tool already in Tool Table."
#~ msgstr "Adding Nozzle tool cancelled. Tool already in Tool Table."

#~ msgid ""
#~ "None of the following args: 'ref', 'all' were found or none was set to "
#~ "1.\n"
#~ "Copper clearing failed."
#~ msgstr ""
#~ "None of the following args: 'ref', 'all' were found or none was set to "
#~ "1.\n"
#~ "Copper clearing failed."

#~ msgid "PostProcessor"
#~ msgstr "PostProcessor"

#~ msgid "Default <b>Zeros</b>"
#~ msgstr "Default <b>Zeros</b>"

#~ msgid ""
#~ "This sets the default type of Excellon zeros.\n"
#~ "If it is not detected in the parsed file the value here\n"
#~ "will be used.If LZ then Leading Zeros are kept and\n"
#~ "Trailing Zeros are removed.\n"
#~ "If TZ is checked then Trailing Zeros are kept\n"
#~ "and Leading Zeros are removed."
#~ msgstr ""
#~ "This sets the default type of Excellon zeros.\n"
#~ "If it is not detected in the parsed file the value here\n"
#~ "will be used.If LZ then Leading Zeros are kept and\n"
#~ "Trailing Zeros are removed.\n"
#~ "If TZ is checked then Trailing Zeros are kept\n"
#~ "and Leading Zeros are removed."

#~ msgid "Default <b>Units</b>"
#~ msgstr "Default <b>Units</b>"

#~ msgid "Coordinates decimals"
#~ msgstr "Coordinates decimals"

#~ msgid "Feedrate decimals"
#~ msgstr "Feedrate decimals"

#~ msgid "Rest M."
#~ msgstr "Rest M."

#~ msgid "Convex Sh."
#~ msgstr "Convex Sh."

#~ msgid "Add Tool to Tools DB"
#~ msgstr "Add Tool to Tools DB"

#~ msgid "Remove Tool from Tools DB"
#~ msgstr "Remove Tool from Tools DB"

#~ msgid "Export Tool DB"
#~ msgstr "Export Tool DB"

#~ msgid "Import Tool DB"
#~ msgstr "Import Tool DB"

#~ msgid "Please enter the desired tool diameter in Float format."
#~ msgstr "Please enter the desired tool diameter in Float format."

#~ msgid "Default Tool added. Wrong value format entered."
#~ msgstr "Default Tool added. Wrong value format entered."

#~ msgid "Import Preferences"
#~ msgstr "Import Preferences"

#~ msgid ""
#~ "Import a full set of FlatCAM settings from a file\n"
#~ "previously saved on HDD.\n"
#~ "\n"
#~ "FlatCAM automatically save a 'factory_defaults' file\n"
#~ "on the first start. Do not delete that file."
#~ msgstr ""
#~ "Import a full set of FlatCAM settings from a file\n"
#~ "previously saved on HDD.\n"
#~ "\n"
#~ "FlatCAM automatically save a 'factory_defaults' file\n"
#~ "on the first start. Do not delete that file."

#~ msgid "Export Preferences"
#~ msgstr "Export Preferences"

#~ msgid ""
#~ "Export a full set of FlatCAM settings in a file\n"
#~ "that is saved on HDD."
#~ msgstr ""
#~ "Export a full set of FlatCAM settings in a file\n"
#~ "that is saved on HDD."

#~ msgid "Start move Z"
#~ msgstr "Start move Z"

#~ msgid "Grid X value"
#~ msgstr "Grid X value"

#~ msgid "Grid Y value"
#~ msgstr "Grid Y value"

#~ msgid "Wk. size"
#~ msgstr "Wk. size"

#~ msgid "Sel. Fill"
#~ msgstr "Sel. Fill"

#~ msgid "Sel. Line"
#~ msgstr "Sel. Line"

#~ msgid "Sel2. Fill"
#~ msgstr "Sel2. Fill"

#~ msgid "Sel2. Line"
#~ msgstr "Sel2. Line"

#~ msgid "Editor Draw Sel."
#~ msgstr "Editor Draw Sel."

#~ msgid "Proj. Dis. Items"
#~ msgstr "Proj. Dis. Items"

#~ msgid "Sel. Shape"
#~ msgstr "Sel. Shape"

#~ msgid "NB Font Size"
#~ msgstr "NB Font Size"

#~ msgid "Axis Font Size"
#~ msgstr "Axis Font Size"

#~ msgid "Textbox Font Size"
#~ msgstr "Textbox Font Size"

#~ msgid "Shell at StartUp"
#~ msgstr "Shell at StartUp"

#~ msgid "Project at StartUp"
#~ msgstr "Project at StartUp"

#~ msgid "Mouse Cursor"
#~ msgstr "Mouse Cursor"

#~ msgid ""
#~ "Set the language used throughout FlatCAM.\n"
#~ "The app will restart after click.Windows: When FlatCAM is installed in "
#~ "Program Files\n"
#~ "directory, it is possible that the app will not\n"
#~ "restart after the button is clicked due of Windows\n"
#~ "security features. In this case the language will be\n"
#~ "applied at the next app start."
#~ msgstr ""
#~ "Set the language used throughout FlatCAM.\n"
#~ "The app will restart after click.Windows: When FlatCAM is installed in "
#~ "Program Files\n"
#~ "directory, it is possible that the app will not\n"
#~ "restart after the button is clicked due of Windows\n"
#~ "security features. In this case the language will be\n"
#~ "applied at the next app start."

#~ msgid "G-code does not have a units code: either G20 or G21"
#~ msgstr "G-code does not have a units code: either G20 or G21"

#, python-brace-format
#~ msgid ""
#~ "[selected] {kind} created/selected: <span style=\"color:{color};\">{name}"
#~ "</span>"
#~ msgstr ""
#~ "[selected] {kind} created/selected: <span style=\"color:{color};\">{name}"
#~ "</span>"

#, python-brace-format
#~ msgid "[selected]<span style=\"color:{color};\">{name}</span> selected"
#~ msgstr "[selected]<span style=\"color:{color};\">{name}</span> selected"

#, python-brace-format
#~ msgid "{l_save}/Project_{date}"
#~ msgstr "{l_save}/Project_{date}"

#, python-brace-format
#~| msgid "{l_save}/Project_{date}"
#~ msgid "{l_save}/{obj_name}_{date}"
#~ msgstr "{l_save}/{obj_name}_{date}"

#, python-format
#~ msgid ""
#~ "How much (fraction) of the tool width to overlap each tool pass.\n"
#~ "Example:\n"
#~ "A value here of 0.25 means 25%% from the tool diameter found above.\n"
#~ "\n"
#~ "Adjust the value starting with lower values\n"
#~ "and increasing it if areas that should be painted are still \n"
#~ "not painted.\n"
#~ "Lower values = faster processing, faster execution on CNC.\n"
#~ "Higher values = slow processing and slow execution on CNC\n"
#~ "due of too many paths."
#~ msgstr ""
#~ "How much (fraction) of the tool width to overlap each tool pass.\n"
#~ "Example:\n"
#~ "A value here of 0.25 means 25%% from the tool diameter found above.\n"
#~ "\n"
#~ "Adjust the value starting with lower values\n"
#~ "and increasing it if areas that should be painted are still \n"
#~ "not painted.\n"
#~ "Lower values = faster processing, faster execution on CNC.\n"
#~ "Higher values = slow processing and slow execution on CNC\n"
#~ "due of too many paths."

#~ msgid ""
#~ "Type here any G-Code commands you would like to append to the generated "
#~ "file. I.e.: M2 (End of program)"
#~ msgstr ""
#~ "Type here any G-Code commands you would like to append to the generated "
#~ "file. I.e.: M2 (End of program)"

#~ msgid ""
#~ "Can be:\n"
#~ "- Portrait\n"
#~ "- Lanscape"
#~ msgstr ""
#~ "Can be:\n"
#~ "- Portrait\n"
#~ "- Lanscape"

#~ msgid ""
#~ "- 'Rectangular' - the bounding box will be of rectangular shape.\n"
#~ " - 'Minimal' - the bounding box will be the convex hull shape."
#~ msgstr ""
#~ "- 'Rectangular' - the bounding box will be of rectangular shape.\n"
#~ " - 'Minimal' - the bounding box will be the convex hull shape."

#~ msgid ""
#~ "- 'Solid' - copper thieving will be a solid polygon.\n"
#~ " - 'Dots Grid' - the empty area will be filled with a pattern of dots.\n"
#~ "- 'Squares Grid' - the empty area will be filled with a pattern of "
#~ "squares.\n"
#~ "- 'Lines Grid' - the empty area will be filled with a pattern of lines."
#~ msgstr ""
#~ "- 'Solid' - copper thieving will be a solid polygon.\n"
#~ " - 'Dots Grid' - the empty area will be filled with a pattern of dots.\n"
#~ "- 'Squares Grid' - the empty area will be filled with a pattern of "
#~ "squares.\n"
#~ "- 'Lines Grid' - the empty area will be filled with a pattern of lines."

#~ msgid "Calibrate Tool"
#~ msgstr "Calibrate Tool"

#, python-brace-format
#~ msgid "MEASURING: Result D(x) = {d_x} | D(y) = {d_y} | Distance = {d_z}"
#~ msgstr "MEASURING: Result D(x) = {d_x} | D(y) = {d_y} | Distance = {d_z}"

#~ msgid "Paint Area"
#~ msgstr "Paint Area"

#~ msgid ""
#~ "Generate GCode file to locate and align the PCB by using\n"
#~ "the four points acquired above."
#~ msgstr ""
#~ "Generate GCode file to locate and align the PCB by using\n"
#~ "the four points acquired above."

#~ msgid "Axis Ref:"
#~ msgstr "Axis Ref:"

#~ msgid "Change project units ..."
#~ msgstr "Change project units ..."

#~ msgid "Tool diameter value is missing or wrong format. Add it and retry."
#~ msgstr "Tool diameter value is missing or wrong format. Add it and retry."

#~ msgid "Overlap value is missing or wrong format. Add it and retry."
#~ msgstr "Overlap value is missing or wrong format. Add it and retry."

#~ msgid "Margin distance value is missing or wrong format. Add it and retry."
#~ msgstr "Margin distance value is missing or wrong format. Add it and retry."

#, python-format
#~ msgid ""
#~ "How much (fraction) of the tool width to overlap each tool pass.\n"
#~ "Example:\n"
#~ "A value here of 0.25 means an overlap of 25%% from the tool diameter "
#~ "found above."
#~ msgstr ""
#~ "How much (fraction) of the tool width to overlap each tool pass.\n"
#~ "Example:\n"
#~ "A value here of 0.25 means an overlap of 25%% from the tool diameter "
#~ "found above."

#~ msgid "Feed Rate X-Y"
#~ msgstr "Feed Rate X-Y"

#~ msgid "Feed Rate Z"
#~ msgstr "Feed Rate Z"

#~ msgid "Feed Rate Rapids"
#~ msgstr "Feed Rate Rapids"

#~ msgid "Generate"
#~ msgstr "Generate"

#~| msgid "STEP 1"
#~ msgid "STEP 5"
#~ msgstr "STEP 5"

#~| msgid "Calc. Tool"
#~ msgid "Cal Exc Tool"
#~ msgstr "Cal Exc Tool"

#~ msgid "Object to be cutout.                        "
#~ msgstr "Object to be cutout.                        "

#~ msgid "Margin:"
#~ msgstr "Margin:"

#~ msgid "Gap size:"
#~ msgstr "Gap size:"

#~ msgid ""
#~ "The cutout shape can be of ny shape.\n"
#~ "Useful when the PCB has a non-rectangular shape."
#~ msgstr ""
#~ "The cutout shape can be of ny shape.\n"
#~ "Useful when the PCB has a non-rectangular shape."

#~ msgid ""
#~ "The resulting cutout shape is\n"
#~ "always a rectangle shape and it will be\n"
#~ "the bounding box of the Object."
#~ msgstr ""
#~ "The resulting cutout shape is\n"
#~ "always a rectangle shape and it will be\n"
#~ "the bounding box of the Object."

#~ msgid "Geo Obj"
#~ msgstr "Geo Obj"

#~ msgid ""
#~ "Use the left mouse button (LMB) click\n"
#~ "to create a bridge gap to separate the PCB from\n"
#~ "the surrounding material."
#~ msgstr ""
#~ "Use the left mouse button (LMB) click\n"
#~ "to create a bridge gap to separate the PCB from\n"
#~ "the surrounding material."

#~ msgid "Generate Gap"
#~ msgstr "Generate Gap"

#~ msgid "Resets all the fields."
#~ msgstr "Resets all the fields."

#~ msgid "Overlap value must be between 0 (inclusive) and 1 (exclusive), "
#~ msgstr "Overlap value must be between 0 (inclusive) and 1 (exclusive), "

#~ msgid "Overlap value must be between 0 (inclusive) and 1 (exclusive)"
#~ msgstr "Overlap value must be between 0 (inclusive) and 1 (exclusive)"

#~ msgid "Click inside the desired polygon."
#~ msgstr "Click inside the desired polygon."

#~ msgid ""
#~ "#\n"
#~ "# CREATE A NEW FLATCAM TCL SCRIPT\n"
#~ "# TCL Tutorial here: https://www.tcl.tk/man/tcl8.5/tutorial/tcltutorial."
#~ "html\n"
#~ "#\n"
#~ "\n"
#~ "# FlatCAM commands list:\n"
#~ "# AddCircle, AddPolygon, AddPolyline, AddRectangle, AlignDrill, "
#~ "AlignDrillGrid, ClearShell, ClearCopper,\n"
#~ "# Cncjob, Cutout, Delete, Drillcncjob, ExportGcode, ExportSVG, Exteriors, "
#~ "GeoCutout, GeoUnion, GetNames,\n"
#~ "# GetSys, ImportSvg, Interiors, Isolate, Follow, JoinExcellon, "
#~ "JoinGeometry, ListSys, MillDrills,\n"
#~ "# MillSlots, Mirror, New, NewGeometry, Offset, OpenExcellon, OpenGCode, "
#~ "OpenGerber, OpenProject,\n"
#~ "# Options, Paint, Panelize, Plot, SaveProject, SaveSys, Scale, SetActive, "
#~ "SetSys, Skew, SubtractPoly,\n"
#~ "# SubtractRectangle, Version, WriteGCode\n"
#~ "#\n"
#~ "\n"
#~ msgstr ""
#~ "#\n"
#~ "# CREATE A NEW FLATCAM TCL SCRIPT\n"
#~ "# TCL Tutorial here: https://www.tcl.tk/man/tcl8.5/tutorial/tcltutorial."
#~ "html\n"
#~ "#\n"
#~ "\n"
#~ "# FlatCAM commands list:\n"
#~ "# AddCircle, AddPolygon, AddPolyline, AddRectangle, AlignDrill, "
#~ "AlignDrillGrid, ClearShell, ClearCopper,\n"
#~ "# Cncjob, Cutout, Delete, Drillcncjob, ExportGcode, ExportSVG, Exteriors, "
#~ "GeoCutout, GeoUnion, GetNames,\n"
#~ "# GetSys, ImportSvg, Interiors, Isolate, Follow, JoinExcellon, "
#~ "JoinGeometry, ListSys, MillDrills,\n"
#~ "# MillSlots, Mirror, New, NewGeometry, Offset, OpenExcellon, OpenGCode, "
#~ "OpenGerber, OpenProject,\n"
#~ "# Options, Paint, Panelize, Plot, SaveProject, SaveSys, Scale, SetActive, "
#~ "SetSys, Skew, SubtractPoly,\n"
#~ "# SubtractRectangle, Version, WriteGCode\n"
#~ "#\n"
#~ "\n"

#~ msgid "Export G-Code ..."
#~ msgstr "Export G-Code ..."

#~ msgid "&View"
#~ msgstr "&View"

#~ msgid "&Tool"
#~ msgstr "&Tool"

#~ msgid "APP.  DEFAULTS"
#~ msgstr "APP.  DEFAULTS"

#~ msgid "PROJ. OPTIONS "
#~ msgstr "PROJ. OPTIONS "

#~ msgid "FULL Geo"
#~ msgstr "FULL Geo"

#~ msgid ""
#~ "Create the Geometry Object\n"
#~ "for isolation routing. It contains both\n"
#~ "the interiors and exteriors geometry."
#~ msgstr ""
#~ "Create the Geometry Object\n"
#~ "for isolation routing. It contains both\n"
#~ "the interiors and exteriors geometry."

#~ msgid "Ext Geo"
#~ msgstr "Ext Geo"

#~ msgid ""
#~ "Create the Geometry Object\n"
#~ "for isolation routing containing\n"
#~ "only the exteriors geometry."
#~ msgstr ""
#~ "Create the Geometry Object\n"
#~ "for isolation routing containing\n"
#~ "only the exteriors geometry."

#~ msgid "Int Geo"
#~ msgstr "Int Geo"

#~ msgid ""
#~ "Create the Geometry Object\n"
#~ "for isolation routing containing\n"
#~ "only the interiors geometry."
#~ msgstr ""
#~ "Create the Geometry Object\n"
#~ "for isolation routing containing\n"
#~ "only the interiors geometry."

#~ msgid ""
#~ "Select from the Tools Table above\n"
#~ "the hole dias that are to be drilled.\n"
#~ "Use the # column to make the selection."
#~ msgstr ""
#~ "Select from the Tools Table above\n"
#~ "the hole dias that are to be drilled.\n"
#~ "Use the # column to make the selection."

#~ msgid "Wk. format"
#~ msgstr "Wk. format"

#~ msgid "y_toolchange = Y coord for Toolchange"
#~ msgstr "y_toolchange = Y coord for Toolchange"

#~ msgid "Ref."
#~ msgstr "Ref."

#~ msgid "Gerber   Reference Box Object"
#~ msgstr "Gerber   Reference Box Object"

#~ msgid "Excellon Reference Box Object"
#~ msgstr "Excellon Reference Box Object"

#~ msgid "Geometry Reference Box Object"
#~ msgstr "Geometry Reference Box Object"

#~ msgid "{l_save}/FlatCAM_Bookmarks_{date}"
#~ msgstr "{l_save}/FlatCAM_Bookmarks_{date}"

#~ msgid "Could not load bookamrks file."
#~ msgstr "Could not load bookamrks file."

#~ msgid "&Help"
#~ msgstr "&Help"

#~ msgid "FlatCAM.org"
#~ msgstr "FlatCAM.org"

#~ msgid "tool = tool number"
#~ msgstr "tool = tool number"

#~ msgid "t_drills = for Excellon, total number of drills"
#~ msgstr "t_drills = for Excellon, total number of drills"

#~ msgid "x_toolchange = X coord for Toolchange"
#~ msgstr "x_toolchange = X coord for Toolchange"

#~ msgid "z_toolchange = Z coord for Toolchange"
#~ msgstr "z_toolchange = Z coord for Toolchange"

#~ msgid "z_depthpercut = the step value for multidepth cut"
#~ msgstr "z_depthpercut = the step value for multidepth cut"

#~ msgid "spindlesspeed = the value for the spindle speed"
#~ msgstr "spindlesspeed = the value for the spindle speed"

#~ msgid "Rotate Angle"
#~ msgstr "Rotate Angle"

#~ msgid "Skew_X angle"
#~ msgstr "Skew_X angle"

#~ msgid "Skew_Y angle"
#~ msgstr "Skew_Y angle"

#~ msgid "Scale_Y factor"
#~ msgstr "Scale_Y factor"

#~ msgid "Offset_X val"
#~ msgstr "Offset_X val"

#~ msgid "Offset_Y val"
#~ msgstr "Offset_Y val"

#~ msgid " Mirror Ref. Point"
#~ msgstr " Mirror Ref. Point"

#~ msgid "The Gerber Copper Bottom file for which rules are checked."
#~ msgstr "The Gerber Copper Bottom file for which rules are checked."

#~ msgid "The Gerber Silkscreen Bottom file for which rules are checked."
#~ msgstr "The Gerber Silkscreen Bottom file for which rules are checked."

#~| msgid "Excellon file"
#~ msgid "Excellon Files"
#~ msgstr "Excellon Files"

#~ msgid "Go"
#~ msgstr "Go"

#~ msgid "There are no polygons to mark area."
#~ msgstr "There are no polygons to mark area."

#~ msgid "&Edit"
#~ msgstr "&Edit"

#~ msgid "&Options"
#~ msgstr "&Options"

#~ msgid "Measurement Tool"
#~ msgstr "Measurement Tool"

#~ msgid "Margin value is missing or wrong format. Add it and retry."
#~ msgstr "Margin value is missing or wrong format. Add it and retry."

#~ msgid "Gap size value is missing or wrong format. Add it and retry."
#~ msgstr "Gap size value is missing or wrong format. Add it and retry."

#~ msgid "Measurement"
#~ msgstr "Measurement"

#~ msgid "Meas. Tool"
#~ msgstr "Meas. Tool"

#~ msgid "Not available with the current Graphic Engine Legacy(2D)."
#~ msgstr "Not available with the current Graphic Engine Legacy(2D)."

#~ msgid "ToolMove.on_left_click()"
#~ msgstr "ToolMove.on_left_click()"

#~ msgid "on_paint_button_click"
#~ msgstr "on_paint_button_click"

#~ msgid "PaintTool.paint_poly()"
#~ msgstr "PaintTool.paint_poly()"

#~ msgid "ToolSolderPaste.on_view_gcode()"
#~ msgstr "ToolSolderPaste.on_view_gcode()"

#~ msgid "App.on_fileopenscript() -->"
#~ msgstr "App.on_fileopenscript() -->"

#~ msgid "<span style=\"color:green;\"><b>%s</b></span>"
#~ msgstr "<span style=\"color:green;\"><b>%s</b></span>"

#~ msgid "<span style=\"color:red;\"><b>%s</b></span>"
#~ msgstr "<span style=\"color:red;\"><b>%s</b></span>"

#~ msgid "FlatCAMObj.GeometryObject.mtool_gen_cncjob() -->"
#~ msgstr "FlatCAMObj.GeometryObject.mtool_gen_cncjob() -->"

#~ msgid "FlatCAMCNNJob.on_edit_code_click() -->"
#~ msgstr "FlatCAMCNNJob.on_edit_code_click() -->"

#~ msgid ""
#~ "toolbars, key shortcuts or even dragging and dropping the files on the GUI"
#~ msgstr ""
#~ "toolbars, key shortcuts or even dragging and dropping the files on the GUI"

#~ msgid ""
#~ "You can also load a FlatCAM project by double clicking on the project "
#~ "file, drag"
#~ msgstr ""
#~ "You can also load a FlatCAM project by double clicking on the project "
#~ "file, drag"

#~ msgid ""
#~ "Once an object is available in the Project Tab, by selecting it and then "
#~ "focusing on"
#~ msgstr ""
#~ "Once an object is available in the Project Tab, by selecting it and then "
#~ "focusing on"

#~ msgid "SELECTED TAB"
#~ msgstr "SELECTED TAB"

#~ msgid "more simpler is to double click the object name in the Project Tab"
#~ msgstr "more simpler is to double click the object name in the Project Tab"

#~ msgid "will be updated with the object properties according to"
#~ msgstr "will be updated with the object properties according to"

#~ msgid "kind: Gerber, Excellon, Geometry or CNCJob object"
#~ msgstr "kind: Gerber, Excellon, Geometry or CNCJob object"

#~ msgid ""
#~ "If the selection of the object is done on the canvas by single click "
#~ "instead, and the"
#~ msgstr ""
#~ "If the selection of the object is done on the canvas by single click "
#~ "instead, and the"

#~ msgid "and populate it even if it was out of focus"
#~ msgstr "and populate it even if it was out of focus"

#~ msgid "Gerber/Excellon Object"
#~ msgstr "Gerber/Excellon Object"

#~ msgid "Add tools (change param in Selected Tab)"
#~ msgstr "Add tools (change param in Selected Tab)"

#~ msgid "Generate CNCJob"
#~ msgstr "Generate CNCJob"

#~ msgid ""
#~ "Verify GCode (through Edit CNC Code) and/or append/prepend to GCode "
#~ "(again, done in"
#~ msgstr ""
#~ "Verify GCode (through Edit CNC Code) and/or append/prepend to GCode "
#~ "(again, done in"

#~ msgid "Shortcuts List"
#~ msgstr "Shortcuts List"

#~ msgid "or through"
#~ msgstr "or through"

#~ msgid "own key shortcut"
#~ msgstr "own key shortcut"

#~ msgid "polygons"
#~ msgstr "polygons"

#~ msgid "geo"
#~ msgstr "geo"

#~ msgid "Stop"
#~ msgstr "Stop"

#~ msgid "Spawning copies"
#~ msgstr "Spawning copies"

#~ msgid "Parsing tool"
#~ msgstr "Parsing tool"

#~ msgid ""
#~ " Wrong value format for self.defaults[\"feedrate_probe\"] or self."
#~ "options[\"feedrate_probe\"]"
#~ msgstr ""
#~ " Wrong value format for self.defaults[\"feedrate_probe\"] or self."
#~ "options[\"feedrate_probe\"]"

#~ msgid "Wrong optimization type selected."
#~ msgstr "Wrong optimization type selected."

#~ msgid "FILE ASSOCIATIONS"
#~ msgstr "FILE ASSOCIATIONS"

#~ msgid "MH"
#~ msgstr "MH"

#~ msgid "Feedrate (Plunge)"
#~ msgstr "Feedrate (Plunge)"

#~ msgid ""
#~ "Parameters used to create a CNC Job object\n"
#~ "for this drill object that are shown when App Level is Advanced."
#~ msgstr ""
#~ "Parameters used to create a CNC Job object\n"
#~ "for this drill object that are shown when App Level is Advanced."

#~ msgid ""
#~ "Parameters to create a CNC Job object\n"
#~ "tracing the contours of a Geometry object."
#~ msgstr ""
#~ "Parameters to create a CNC Job object\n"
#~ "tracing the contours of a Geometry object."

#~ msgid "Manufacturing"
#~ msgstr "Manufacturing"

#~ msgid "Function"
#~ msgstr "Function"

#~ msgid ""
#~ "Juan Pablo Caram <BR><BR>Denis Hayrullin<BR>Kamil Sopko<BR>Marius "
#~ "Stanciu<BR>Matthieu Berthomé<BR><Br>and many others found <a href = "
#~ "\"https://bitbucket.org/jpcgt/flatcam/pull-requests/?state=MERGED\">here."
#~ "</a><BR><BR>"
#~ msgstr ""
#~ "Juan Pablo Caram <BR><BR>Denis Hayrullin<BR>Kamil Sopko<BR>Marius "
#~ "Stanciu<BR>Matthieu Berthomé<BR><Br>and many others found <a href = "
#~ "\"https://bitbucket.org/jpcgt/flatcam/pull-requests/?state=MERGED\">here."
#~ "</a><BR><BR>"

#~ msgid ""
#~ "\n"
#~ "<p><span style=\"font-size:{tsize}px\"><strong>Selected Tab - Choose an "
#~ "Item from Project Tab</strong></span></p>\n"
#~ "\n"
#~ "<p><span style=\"font-size:{fsize}px\"><strong>Details</strong>:<br />\n"
#~ "The normal flow when working in FlatCAM is the following:</span></p>\n"
#~ "\n"
#~ "<ol>\n"
#~ "\t<li><span style=\"font-size:{fsize}px\">Loat/Import a Gerber, Excellon, "
#~ "Gcode, DXF, Raster Image or SVG file into FlatCAM using either the "
#~ "menu&#39;s, toolbars, key shortcuts or even dragging and dropping the "
#~ "files on the GUI.<br />\n"
#~ "\t<br />\n"
#~ "\tYou can also load a <strong>FlatCAM project</strong> by double clicking "
#~ "on the project file, drag &amp; drop of the file into the FLATCAM GUI or "
#~ "through the menu/toolbar links offered within the app.</span><br />\n"
#~ "\t&nbsp;</li>\n"
#~ "\t<li><span style=\"font-size:{fsize}px\">Once an object is available in "
#~ "the Project Tab, by selecting it and then focusing on <strong>SELECTED "
#~ "TAB </strong>(more simpler is to double click the object name in the "
#~ "Project Tab), <strong>SELECTED TAB </strong>will be updated with the "
#~ "object properties according to it&#39;s kind: Gerber, Excellon, Geometry "
#~ "or CNCJob object.<br />\n"
#~ "\t<br />\n"
#~ "\tIf the selection of the object is done on the canvas by single click "
#~ "instead, and the <strong>SELECTED TAB</strong> is in focus, again the "
#~ "object properties will be displayed into the Selected Tab. Alternatively, "
#~ "double clicking on the object on the canvas will bring the "
#~ "<strong>SELECTED TAB</strong> and populate it even if it was out of focus."
#~ "<br />\n"
#~ "\t<br />\n"
#~ "\tYou can change the parameters in this screen and the flow direction is "
#~ "like this:<br />\n"
#~ "\t<br />\n"
#~ "\t<strong>Gerber/Excellon Object</strong> -&gt; Change Param -&gt; "
#~ "Generate Geometry -&gt;<strong> Geometry Object </strong>-&gt; Add tools "
#~ "(change param in Selected Tab) -&gt; Generate CNCJob -&gt;<strong> CNCJob "
#~ "Object </strong>-&gt; Verify GCode (through Edit CNC Code) and/or append/"
#~ "prepend to GCode (again, done in <strong>SELECTED TAB)&nbsp;</strong>-"
#~ "&gt; Save GCode</span></li>\n"
#~ "</ol>\n"
#~ "\n"
#~ "<p><span style=\"font-size:{fsize}px\">A list of key shortcuts is "
#~ "available through an menu entry in <strong>Help -&gt; Shortcuts List</"
#~ "strong>&nbsp;or through it&#39;s own key shortcut: <strong>F3</strong>.</"
#~ "span></p>\n"
#~ "\n"
#~ "        "
#~ msgstr ""
#~ "\n"
#~ "<p><span style=\"font-size:{tsize}px\"><strong>Selected Tab - Choose an "
#~ "Item from Project Tab</strong></span></p>\n"
#~ "\n"
#~ "<p><span style=\"font-size:{fsize}px\"><strong>Details</strong>:<br />\n"
#~ "The normal flow when working in FlatCAM is the following:</span></p>\n"
#~ "\n"
#~ "<ol>\n"
#~ "\t<li><span style=\"font-size:{fsize}px\">Loat/Import a Gerber, Excellon, "
#~ "Gcode, DXF, Raster Image or SVG file into FlatCAM using either the "
#~ "menu&#39;s, toolbars, key shortcuts or even dragging and dropping the "
#~ "files on the GUI.<br />\n"
#~ "\t<br />\n"
#~ "\tYou can also load a <strong>FlatCAM project</strong> by double clicking "
#~ "on the project file, drag &amp; drop of the file into the FLATCAM GUI or "
#~ "through the menu/toolbar links offered within the app.</span><br />\n"
#~ "\t&nbsp;</li>\n"
#~ "\t<li><span style=\"font-size:{fsize}px\">Once an object is available in "
#~ "the Project Tab, by selecting it and then focusing on <strong>SELECTED "
#~ "TAB </strong>(more simpler is to double click the object name in the "
#~ "Project Tab), <strong>SELECTED TAB </strong>will be updated with the "
#~ "object properties according to it&#39;s kind: Gerber, Excellon, Geometry "
#~ "or CNCJob object.<br />\n"
#~ "\t<br />\n"
#~ "\tIf the selection of the object is done on the canvas by single click "
#~ "instead, and the <strong>SELECTED TAB</strong> is in focus, again the "
#~ "object properties will be displayed into the Selected Tab. Alternatively, "
#~ "double clicking on the object on the canvas will bring the "
#~ "<strong>SELECTED TAB</strong> and populate it even if it was out of focus."
#~ "<br />\n"
#~ "\t<br />\n"
#~ "\tYou can change the parameters in this screen and the flow direction is "
#~ "like this:<br />\n"
#~ "\t<br />\n"
#~ "\t<strong>Gerber/Excellon Object</strong> -&gt; Change Param -&gt; "
#~ "Generate Geometry -&gt;<strong> Geometry Object </strong>-&gt; Add tools "
#~ "(change param in Selected Tab) -&gt; Generate CNCJob -&gt;<strong> CNCJob "
#~ "Object </strong>-&gt; Verify GCode (through Edit CNC Code) and/or append/"
#~ "prepend to GCode (again, done in <strong>SELECTED TAB)&nbsp;</strong>-"
#~ "&gt; Save GCode</span></li>\n"
#~ "</ol>\n"
#~ "\n"
#~ "<p><span style=\"font-size:{fsize}px\">A list of key shortcuts is "
#~ "available through an menu entry in <strong>Help -&gt; Shortcuts List</"
#~ "strong>&nbsp;or through it&#39;s own key shortcut: <strong>F3</strong>.</"
#~ "span></p>\n"
#~ "\n"
#~ "        "

#~ msgid "Run Script ...\tShift+S"
#~ msgstr "Run Script ...\tShift+S"

#~| msgid ""
#~| "<font size=8><B>FlatCAM</B></font><BR>Version {version} {beta} ({date}) "
#~| "- {arch} <BR><BR>2D Computer-Aided Printed Circuit "
#~| "Board<BR>Manufacturing.<BR><BR>(c) 2014-2019 <B>Juan Pablo Caram</"
#~| "B><BR><BR><B> Main Contributors:</B><BR>Denis Hayrullin<BR>Kamil "
#~| "Sopko<BR>Marius Stanciu<BR>Matthieu Berthomé<BR>and many others found <a "
#~| "href = \"https://bitbucket.org/jpcgt/flatcam/pull-requests/?state=MERGED"
#~| "\">here.</a><BR><BR>Development is done <a href = \"https://bitbucket."
#~| "org/jpcgt/flatcam/src/Beta/\">here.</a><BR>DOWNLOAD area <a href = "
#~| "\"https://bitbucket.org/jpcgt/flatcam/downloads/\">here.</a><BR>"
#~ msgid ""
#~ "<font size=8><B>FlatCAM</B></font><BR>Version {version} {beta} ({date}) - "
#~ "{arch} <BR><BR>2D Computer-Aided Printed Circuit Board<BR>Manufacturing."
#~ "<BR><BR><B> License: </B><BR>Licensed under MIT license (2014 - "
#~ "2019)<BR>by (c)Juan Pablo Caram <BR><BR><B> Programmers:</B><BR>Denis "
#~ "Hayrullin<BR>Kamil Sopko<BR>Marius Stanciu<BR>Matthieu Berthomé<BR>and "
#~ "many others found <a href = \"https://bitbucket.org/jpcgt/flatcam/pull-"
#~ "requests/?state=MERGED\">here.</a><BR><BR><B>Development</B> is done <a "
#~ "href = \"https://bitbucket.org/jpcgt/flatcam/src/Beta/\">here.</"
#~ "a><BR><b>DOWNLOAD</B> area <a href = \"https://bitbucket.org/jpcgt/"
#~ "flatcam/downloads/\">here.</a><BR>"
#~ msgstr ""
#~ "<font size=8><B>FlatCAM</B></font><BR>Version {version} {beta} ({date}) - "
#~ "{arch} <BR><BR>2D Computer-Aided Printed Circuit Board<BR>Manufacturing."
#~ "<BR><BR><B> License: </B><BR>Licensed under MIT license (2014 - "
#~ "2019)<BR>by (c)Juan Pablo Caram <BR><BR><B> Programmers:</B><BR>Denis "
#~ "Hayrullin<BR>Kamil Sopko<BR>Marius Stanciu<BR>Matthieu Berthomé<BR>and "
#~ "many others found <a href = \"https://bitbucket.org/jpcgt/flatcam/pull-"
#~ "requests/?state=MERGED\">here.</a><BR><BR><B>Development</B> is done <a "
#~ "href = \"https://bitbucket.org/jpcgt/flatcam/src/Beta/\">here.</"
#~ "a><BR><b>DOWNLOAD</B> area <a href = \"https://bitbucket.org/jpcgt/"
#~ "flatcam/downloads/\">here.</a><BR>"

#~| msgid "[ERROR_NOTCL] Expected a GeometryObject, got %s"
#~ msgid "Expected a GeometryObject, got %s"
#~ msgstr "Expected a GeometryObject, got %s"

#~ msgid "Saved to: %s"
#~ msgstr "Saved to: %s"

#~ msgid "[WARNING_NOTCL] Adding Tool cancelled ..."
#~ msgstr "[WARNING_NOTCL] Adding Tool cancelled ..."

#~ msgid "%s"
#~ msgstr "%s"

#~| msgid "[ERROR]App.on_view_source() -->%s"
#~ msgid "App.on_view_source() -->"
#~ msgstr "App.on_view_source() -->"

#~ msgid "[success] Name changed from {old} to {new}"
#~ msgstr "[success] Name changed from {old} to {new}"

#~| msgid ""
#~| "[ERROR_NOTCL] Failed.\n"
#~| "%s"
#~ msgid "[ERROR_NOTCL] %s"
#~ msgstr "[ERROR_NOTCL] %s"

#~ msgid "Editor %s"
#~ msgstr "Editor %s"

#~ msgid "[success] Done. Path completed."
#~ msgstr "[success] Done. Path completed."

#~ msgid "[success] Paint done."
#~ msgstr "[success] Paint done."

#~ msgid "About"
#~ msgstr "About"

#~| msgid ""
#~| "<b>General Shortcut list</b><br>\n"
#~| "            <table border=\"0\" cellpadding=\"0\" cellspacing=\"0\" "
#~| "style=\"width:283px\">\n"
#~| "                <tbody>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\" width=\"89\"><strong>F3</"
#~| "strong></td>\n"
#~| "                        <td width=\"194\"><span style=\"color:"
#~| "#006400\"><strong>&nbsp;SHOW SHORTCUT LIST</strong></span></td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\">&nbsp;</td>\n"
#~| "                        <td>&nbsp;</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>1</strong></td>\n"
#~| "                        <td>&nbsp;Switch to Project Tab</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>2</strong></td>\n"
#~| "                        <td>&nbsp;Switch to Selected Tab</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>3</strong></td>\n"
#~| "                        <td>&nbsp;Switch to Tool Tab</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\">&nbsp;</td>\n"
#~| "                        <td>&nbsp;</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>B</strong></td>\n"
#~| "                        <td>&nbsp;New Gerber</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>E</strong></td>\n"
#~| "                        <td>&nbsp;Edit Object (if selected)</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>G</strong></td>\n"
#~| "                        <td>&nbsp;Grid On/Off</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>J</strong></td>\n"
#~| "                        <td>&nbsp;Jump to Coordinates</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>L</strong></td>\n"
#~| "                        <td>&nbsp;New Excellon</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>M</strong></td>\n"
#~| "                        <td>&nbsp;Move Obj</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>N</strong></td>\n"
#~| "                        <td>&nbsp;New Geometry</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>O</strong></td>\n"
#~| "                        <td>&nbsp;Set Origin</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>Q</strong></td>\n"
#~| "                        <td>&nbsp;Change Units</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>P</strong></td>\n"
#~| "                        <td>&nbsp;Open Properties Tool</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>R</strong></td>\n"
#~| "                        <td>&nbsp;Rotate by 90 degree CW</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>S</strong></td>\n"
#~| "                        <td>&nbsp;Shell Toggle</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>T</strong></td>\n"
#~| "                        <td>&nbsp;Add a Tool (when in Geometry Selected "
#~| "Tab or in Tools NCC or Tools Paint)</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>V</strong></td>\n"
#~| "                        <td>&nbsp;Zoom Fit</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>X</strong></td>\n"
#~| "                        <td>&nbsp;Flip on X_axis</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>Y</strong></td>\n"
#~| "                        <td>&nbsp;Flip on Y_axis</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>&#39;-&#39;</strong></"
#~| "td>\n"
#~| "                        <td>&nbsp;Zoom Out</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>&#39;=&#39;</strong></"
#~| "td>\n"
#~| "                        <td>&nbsp;Zoom In</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\">&nbsp;</td>\n"
#~| "                        <td>&nbsp;</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>Ctrl+A</strong></td>\n"
#~| "                        <td>&nbsp;Select All</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>Ctrl+C</strong></td>\n"
#~| "                        <td>&nbsp;Copy Obj</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>Ctrl+E</strong></td>\n"
#~| "                        <td>&nbsp;Open Excellon File</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>Ctrl+G</strong></td>\n"
#~| "                        <td>&nbsp;Open Gerber File</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>Ctrl+N</strong></td>\n"
#~| "                        <td>&nbsp;New Project</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>Ctrl+M</strong></td>\n"
#~| "                        <td>&nbsp;Measurement Tool</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>Ctrl+O</strong></td>\n"
#~| "                        <td>&nbsp;Open Project</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>Ctrl+S</strong></td>\n"
#~| "                        <td>&nbsp;Save Project As</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>Ctrl+F10</strong></"
#~| "td>\n"
#~| "                        <td>&nbsp;Toggle Plot Area</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\">&nbsp;</td>\n"
#~| "                        <td>&nbsp;</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>Shift+C</strong></td>\n"
#~| "                        <td>&nbsp;Copy Obj_Name</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>Shift+E</strong></td>\n"
#~| "                        <td>&nbsp;Toggle Code Editor</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>Shift+G</strong></td>\n"
#~| "                        <td>&nbsp;Toggle the axis</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>Shift+P</strong></td>\n"
#~| "                        <td>&nbsp;Open Preferences Window</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>Shift+R</strong></td>\n"
#~| "                        <td>&nbsp;Rotate by 90 degree CCW</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>Shift+S</strong></td>\n"
#~| "                        <td>&nbsp;Run a Script</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>Shift+W</strong></td>\n"
#~| "                        <td>&nbsp;Toggle the workspace</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>Shift+X</strong></td>\n"
#~| "                        <td>&nbsp;Skew on X axis</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>Shift+Y</strong></td>\n"
#~| "                        <td>&nbsp;Skew on Y axis</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\">&nbsp;</td>\n"
#~| "                        <td>&nbsp;</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>Alt+C</strong></td>\n"
#~| "                        <td>&nbsp;Calculators Tool</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>Alt+D</strong></td>\n"
#~| "                        <td>&nbsp;2-Sided PCB Tool</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>Alt+K</strong></td>\n"
#~| "                        <td>&nbsp;Solder Paste Dispensing Tool</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>Alt+L</strong></td>\n"
#~| "                        <td>&nbsp;Film PCB Tool</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>Alt+N</strong></td>\n"
#~| "                        <td>&nbsp;Non-Copper Clearing Tool</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>Alt+P</strong></td>\n"
#~| "                        <td>&nbsp;Paint Area Tool</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>Alt+Q</strong></td>\n"
#~| "                        <td>&nbsp;PDF Import Tool</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>Alt+R</strong></td>\n"
#~| "                        <td>&nbsp;Transformations Tool</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>Alt+S</strong></td>\n"
#~| "                        <td>&nbsp;View File Source</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>Alt+U</strong></td>\n"
#~| "                        <td>&nbsp;Cutout PCB Tool</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>Alt+1</strong></td>\n"
#~| "                        <td>&nbsp;Enable all Plots</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>Alt+2</strong></td>\n"
#~| "                        <td>&nbsp;Disable all Plots</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>Alt+3</strong></td>\n"
#~| "                        <td>&nbsp;Disable Non-selected Plots</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>Alt+F10</strong></td>\n"
#~| "                        <td>&nbsp;Toggle Full Screen</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\">&nbsp;</td>\n"
#~| "                        <td>&nbsp;</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>F1</strong></td>\n"
#~| "                        <td>&nbsp;Open Online Manual</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>F4</strong></td>\n"
#~| "                        <td>&nbsp;Open Online Tutorials</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>Del</strong></td>\n"
#~| "                        <td>&nbsp;Delete Object</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>Del</strong></td>\n"
#~| "                        <td>&nbsp;Alternate: Delete Tool</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>'`'</strong></td>\n"
#~| "                        <td>&nbsp;(left to Key_1)Toogle Notebook Area "
#~| "(Left Side)</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>SPACE</strong></td>\n"
#~| "                        <td>&nbsp;En(Dis)able Obj Plot</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>Escape</strong></td>\n"
#~| "                        <td>&nbsp;Deselects all objects</td>\n"
#~| "                    </tr>\n"
#~| "                </tbody>\n"
#~| "            </table>\n"
#~| "    \n"
#~| "            "
#~ msgid ""
#~ "<b>General Shortcut list</b><br>\n"
#~ "            <table border=\"0\" cellpadding=\"0\" cellspacing=\"0\" style="
#~ "\"width:283px\">\n"
#~ "                <tbody>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\" width=\"89\"><strong>F3</"
#~ "strong></td>\n"
#~ "                        <td width=\"194\"><span style=\"color:"
#~ "#006400\"><strong>&nbsp;SHOW SHORTCUT LIST</strong></span></td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>1</strong></td>\n"
#~ "                        <td>&nbsp;Switch to Project Tab</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>2</strong></td>\n"
#~ "                        <td>&nbsp;Switch to Selected Tab</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>3</strong></td>\n"
#~ "                        <td>&nbsp;Switch to Tool Tab</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>B</strong></td>\n"
#~ "                        <td>&nbsp;New Gerber</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>E</strong></td>\n"
#~ "                        <td>&nbsp;Edit Object (if selected)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>G</strong></td>\n"
#~ "                        <td>&nbsp;Grid On/Off</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>J</strong></td>\n"
#~ "                        <td>&nbsp;Jump to Coordinates</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>L</strong></td>\n"
#~ "                        <td>&nbsp;New Excellon</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>M</strong></td>\n"
#~ "                        <td>&nbsp;Move Obj</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>N</strong></td>\n"
#~ "                        <td>&nbsp;New Geometry</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>O</strong></td>\n"
#~ "                        <td>&nbsp;Set Origin</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Q</strong></td>\n"
#~ "                        <td>&nbsp;Change Units</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>P</strong></td>\n"
#~ "                        <td>&nbsp;Open Properties Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>R</strong></td>\n"
#~ "                        <td>&nbsp;Rotate by 90 degree CW</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>S</strong></td>\n"
#~ "                        <td>&nbsp;Shell Toggle</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>T</strong></td>\n"
#~ "                        <td>&nbsp;Add a Tool (when in Geometry Selected "
#~ "Tab or in Tools NCC or Tools Paint)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>V</strong></td>\n"
#~ "                        <td>&nbsp;Zoom Fit</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>X</strong></td>\n"
#~ "                        <td>&nbsp;Flip on X_axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Y</strong></td>\n"
#~ "                        <td>&nbsp;Flip on Y_axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>&#39;-&#39;</strong></"
#~ "td>\n"
#~ "                        <td>&nbsp;Zoom Out</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>&#39;=&#39;</strong></"
#~ "td>\n"
#~ "                        <td>&nbsp;Zoom In</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Ctrl+A</strong></td>\n"
#~ "                        <td>&nbsp;Select All</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Ctrl+C</strong></td>\n"
#~ "                        <td>&nbsp;Copy Obj</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Ctrl+E</strong></td>\n"
#~ "                        <td>&nbsp;Open Excellon File</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Ctrl+G</strong></td>\n"
#~ "                        <td>&nbsp;Open Gerber File</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Ctrl+N</strong></td>\n"
#~ "                        <td>&nbsp;New Project</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Ctrl+M</strong></td>\n"
#~ "                        <td>&nbsp;Measurement Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Ctrl+O</strong></td>\n"
#~ "                        <td>&nbsp;Open Project</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Ctrl+S</strong></td>\n"
#~ "                        <td>&nbsp;Save Project As</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Ctrl+F10</strong></td>\n"
#~ "                        <td>&nbsp;Toggle Plot Area</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Shift+C</strong></td>\n"
#~ "                        <td>&nbsp;Copy Obj_Name</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Shift+E</strong></td>\n"
#~ "                        <td>&nbsp;Toggle Code Editor</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Shift+G</strong></td>\n"
#~ "                        <td>&nbsp;Toggle the axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Shift+P</strong></td>\n"
#~ "                        <td>&nbsp;Open Preferences Window</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Shift+R</strong></td>\n"
#~ "                        <td>&nbsp;Rotate by 90 degree CCW</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Shift+S</strong></td>\n"
#~ "                        <td>&nbsp;Run a Script</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Shift+W</strong></td>\n"
#~ "                        <td>&nbsp;Toggle the workspace</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Shift+X</strong></td>\n"
#~ "                        <td>&nbsp;Skew on X axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Shift+Y</strong></td>\n"
#~ "                        <td>&nbsp;Skew on Y axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Alt+C</strong></td>\n"
#~ "                        <td>&nbsp;Calculators Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Alt+D</strong></td>\n"
#~ "                        <td>&nbsp;2-Sided PCB Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Alt+K</strong></td>\n"
#~ "                        <td>&nbsp;Solder Paste Dispensing Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Alt+L</strong></td>\n"
#~ "                        <td>&nbsp;Film PCB Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Alt+N</strong></td>\n"
#~ "                        <td>&nbsp;Non-Copper Clearing Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Alt+P</strong></td>\n"
#~ "                        <td>&nbsp;Paint Area Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Alt+Q</strong></td>\n"
#~ "                        <td>&nbsp;PDF Import Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Alt+R</strong></td>\n"
#~ "                        <td>&nbsp;Transformations Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Alt+S</strong></td>\n"
#~ "                        <td>&nbsp;View File Source</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Alt+U</strong></td>\n"
#~ "                        <td>&nbsp;Cutout PCB Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Alt+1</strong></td>\n"
#~ "                        <td>&nbsp;Enable all Plots</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Alt+2</strong></td>\n"
#~ "                        <td>&nbsp;Disable all Plots</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Alt+3</strong></td>\n"
#~ "                        <td>&nbsp;Disable Non-selected Plots</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Alt+F10</strong></td>\n"
#~ "                        <td>&nbsp;Toggle Full Screen</td>\n"
#~ "                    </tr>                 \n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Ctrl+Alt+X</strong></"
#~ "td>\n"
#~ "                        <td>&nbsp;Abort current task (gracefully)</td>\n"
#~ "                    </tr>                    \n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>F1</strong></td>\n"
#~ "                        <td>&nbsp;Open Online Manual</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>F4</strong></td>\n"
#~ "                        <td>&nbsp;Open Online Tutorials</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Del</strong></td>\n"
#~ "                        <td>&nbsp;Delete Object</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Del</strong></td>\n"
#~ "                        <td>&nbsp;Alternate: Delete Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>'`'</strong></td>\n"
#~ "                        <td>&nbsp;(left to Key_1)Toogle Notebook Area "
#~ "(Left Side)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>SPACE</strong></td>\n"
#~ "                        <td>&nbsp;En(Dis)able Obj Plot</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Escape</strong></td>\n"
#~ "                        <td>&nbsp;Deselects all objects</td>\n"
#~ "                    </tr>\n"
#~ "                </tbody>\n"
#~ "            </table>\n"
#~ "    \n"
#~ "            "
#~ msgstr ""
#~ "<b>General Shortcut list</b><br>\n"
#~ "            <table border=\"0\" cellpadding=\"0\" cellspacing=\"0\" style="
#~ "\"width:283px\">\n"
#~ "                <tbody>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\" width=\"89\"><strong>F3</"
#~ "strong></td>\n"
#~ "                        <td width=\"194\"><span style=\"color:"
#~ "#006400\"><strong>&nbsp;SHOW SHORTCUT LIST</strong></span></td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>1</strong></td>\n"
#~ "                        <td>&nbsp;Switch to Project Tab</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>2</strong></td>\n"
#~ "                        <td>&nbsp;Switch to Selected Tab</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>3</strong></td>\n"
#~ "                        <td>&nbsp;Switch to Tool Tab</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>B</strong></td>\n"
#~ "                        <td>&nbsp;New Gerber</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>E</strong></td>\n"
#~ "                        <td>&nbsp;Edit Object (if selected)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>G</strong></td>\n"
#~ "                        <td>&nbsp;Grid On/Off</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>J</strong></td>\n"
#~ "                        <td>&nbsp;Jump to Coordinates</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>L</strong></td>\n"
#~ "                        <td>&nbsp;New Excellon</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>M</strong></td>\n"
#~ "                        <td>&nbsp;Move Obj</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>N</strong></td>\n"
#~ "                        <td>&nbsp;New Geometry</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>O</strong></td>\n"
#~ "                        <td>&nbsp;Set Origin</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Q</strong></td>\n"
#~ "                        <td>&nbsp;Change Units</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>P</strong></td>\n"
#~ "                        <td>&nbsp;Open Properties Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>R</strong></td>\n"
#~ "                        <td>&nbsp;Rotate by 90 degree CW</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>S</strong></td>\n"
#~ "                        <td>&nbsp;Shell Toggle</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>T</strong></td>\n"
#~ "                        <td>&nbsp;Add a Tool (when in Geometry Selected "
#~ "Tab or in Tools NCC or Tools Paint)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>V</strong></td>\n"
#~ "                        <td>&nbsp;Zoom Fit</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>X</strong></td>\n"
#~ "                        <td>&nbsp;Flip on X_axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Y</strong></td>\n"
#~ "                        <td>&nbsp;Flip on Y_axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>&#39;-&#39;</strong></"
#~ "td>\n"
#~ "                        <td>&nbsp;Zoom Out</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>&#39;=&#39;</strong></"
#~ "td>\n"
#~ "                        <td>&nbsp;Zoom In</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Ctrl+A</strong></td>\n"
#~ "                        <td>&nbsp;Select All</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Ctrl+C</strong></td>\n"
#~ "                        <td>&nbsp;Copy Obj</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Ctrl+E</strong></td>\n"
#~ "                        <td>&nbsp;Open Excellon File</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Ctrl+G</strong></td>\n"
#~ "                        <td>&nbsp;Open Gerber File</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Ctrl+N</strong></td>\n"
#~ "                        <td>&nbsp;New Project</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Ctrl+M</strong></td>\n"
#~ "                        <td>&nbsp;Measurement Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Ctrl+O</strong></td>\n"
#~ "                        <td>&nbsp;Open Project</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Ctrl+S</strong></td>\n"
#~ "                        <td>&nbsp;Save Project As</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Ctrl+F10</strong></td>\n"
#~ "                        <td>&nbsp;Toggle Plot Area</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Shift+C</strong></td>\n"
#~ "                        <td>&nbsp;Copy Obj_Name</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Shift+E</strong></td>\n"
#~ "                        <td>&nbsp;Toggle Code Editor</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Shift+G</strong></td>\n"
#~ "                        <td>&nbsp;Toggle the axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Shift+P</strong></td>\n"
#~ "                        <td>&nbsp;Open Preferences Window</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Shift+R</strong></td>\n"
#~ "                        <td>&nbsp;Rotate by 90 degree CCW</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Shift+S</strong></td>\n"
#~ "                        <td>&nbsp;Run a Script</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Shift+W</strong></td>\n"
#~ "                        <td>&nbsp;Toggle the workspace</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Shift+X</strong></td>\n"
#~ "                        <td>&nbsp;Skew on X axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Shift+Y</strong></td>\n"
#~ "                        <td>&nbsp;Skew on Y axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Alt+C</strong></td>\n"
#~ "                        <td>&nbsp;Calculators Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Alt+D</strong></td>\n"
#~ "                        <td>&nbsp;2-Sided PCB Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Alt+K</strong></td>\n"
#~ "                        <td>&nbsp;Solder Paste Dispensing Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Alt+L</strong></td>\n"
#~ "                        <td>&nbsp;Film PCB Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Alt+N</strong></td>\n"
#~ "                        <td>&nbsp;Non-Copper Clearing Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Alt+P</strong></td>\n"
#~ "                        <td>&nbsp;Paint Area Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Alt+Q</strong></td>\n"
#~ "                        <td>&nbsp;PDF Import Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Alt+R</strong></td>\n"
#~ "                        <td>&nbsp;Transformations Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Alt+S</strong></td>\n"
#~ "                        <td>&nbsp;View File Source</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Alt+U</strong></td>\n"
#~ "                        <td>&nbsp;Cutout PCB Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Alt+1</strong></td>\n"
#~ "                        <td>&nbsp;Enable all Plots</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Alt+2</strong></td>\n"
#~ "                        <td>&nbsp;Disable all Plots</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Alt+3</strong></td>\n"
#~ "                        <td>&nbsp;Disable Non-selected Plots</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Alt+F10</strong></td>\n"
#~ "                        <td>&nbsp;Toggle Full Screen</td>\n"
#~ "                    </tr>                 \n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Ctrl+Alt+X</strong></"
#~ "td>\n"
#~ "                        <td>&nbsp;Abort current task (gracefully)</td>\n"
#~ "                    </tr>                    \n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>F1</strong></td>\n"
#~ "                        <td>&nbsp;Open Online Manual</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>F4</strong></td>\n"
#~ "                        <td>&nbsp;Open Online Tutorials</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Del</strong></td>\n"
#~ "                        <td>&nbsp;Delete Object</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Del</strong></td>\n"
#~ "                        <td>&nbsp;Alternate: Delete Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>'`'</strong></td>\n"
#~ "                        <td>&nbsp;(left to Key_1)Toogle Notebook Area "
#~ "(Left Side)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>SPACE</strong></td>\n"
#~ "                        <td>&nbsp;En(Dis)able Obj Plot</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Escape</strong></td>\n"
#~ "                        <td>&nbsp;Deselects all objects</td>\n"
#~ "                    </tr>\n"
#~ "                </tbody>\n"
#~ "            </table>\n"
#~ "    \n"
#~ "            "

#~ msgid ""
#~ "<b>Editor Shortcut list</b><br>\n"
#~ "            <br>\n"
#~ "            <strong><span style=\"color:#0000ff\">GEOMETRY EDITOR</span></"
#~ "strong><br>\n"
#~ "    \n"
#~ "            <table border=\"0\" cellpadding=\"0\" cellspacing=\"0\" style="
#~ "\"width:283px\">\n"
#~ "                <tbody>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\" width=\"89\"><strong>A</"
#~ "strong></td>\n"
#~ "                        <td width=\"194\">&nbsp;Draw an Arc</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>B</strong></td>\n"
#~ "                        <td>&nbsp;Buffer Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>C</strong></td>\n"
#~ "                        <td>&nbsp;Copy Geo Item</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>D</strong></td>\n"
#~ "                        <td>&nbsp;Within Add Arc will toogle the ARC "
#~ "direction: CW or CCW</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>E</strong></td>\n"
#~ "                        <td>&nbsp;Polygon Intersection Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>I</strong></td>\n"
#~ "                        <td>&nbsp;Paint Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>J</strong></td>\n"
#~ "                        <td>&nbsp;Jump to Location (x, y)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>K</strong></td>\n"
#~ "                        <td>&nbsp;Toggle Corner Snap</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>M</strong></td>\n"
#~ "                        <td>&nbsp;Move Geo Item</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>M</strong></td>\n"
#~ "                        <td>&nbsp;Within Add Arc will cycle through the "
#~ "ARC modes</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>N</strong></td>\n"
#~ "                        <td>&nbsp;Draw a Polygon</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>O</strong></td>\n"
#~ "                        <td>&nbsp;Draw a Circle</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>P</strong></td>\n"
#~ "                        <td>&nbsp;Draw a Path</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>R</strong></td>\n"
#~ "                        <td>&nbsp;Draw Rectangle</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>S</strong></td>\n"
#~ "                        <td>&nbsp;Polygon Substraction Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>T</strong></td>\n"
#~ "                        <td>&nbsp;Add Text Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>U</strong></td>\n"
#~ "                        <td>&nbsp;Polygon Union Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>X</strong></td>\n"
#~ "                        <td>&nbsp;Flip shape on X axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Y</strong></td>\n"
#~ "                        <td>&nbsp;Flip shape on Y axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Shift+X</strong></td>\n"
#~ "                        <td>&nbsp;Skew shape on X axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Shift+Y</strong></td>\n"
#~ "                        <td>&nbsp;Skew shape on Y axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Alt+R</strong></td>\n"
#~ "                        <td>&nbsp;Editor Transformation Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Alt+X</strong></td>\n"
#~ "                        <td>&nbsp;Offset shape on X axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Alt+Y</strong></td>\n"
#~ "                        <td>&nbsp;Offset shape on Y axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Ctrl+M</strong></td>\n"
#~ "                        <td>&nbsp;Measurement Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Ctrl+S</strong></td>\n"
#~ "                        <td>&nbsp;Save Object and Exit Editor</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Ctrl+X</strong></td>\n"
#~ "                        <td>&nbsp;Polygon Cut Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Space</strong></td>\n"
#~ "                        <td>&nbsp;Rotate Geometry</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ENTER</strong></td>\n"
#~ "                        <td>&nbsp;Finish drawing for certain tools</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ESC</strong></td>\n"
#~ "                        <td>&nbsp;Abort and return to Select</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Del</strong></td>\n"
#~ "                        <td>&nbsp;Delete Shape</td>\n"
#~ "                    </tr>\n"
#~ "                </tbody>\n"
#~ "            </table>\n"
#~ "            <br>\n"
#~ "            <br>\n"
#~ "            <strong><span style=\"color:#ff0000\">EXCELLON EDITOR</span></"
#~ "strong><br>\n"
#~ "            <table border=\"0\" cellpadding=\"0\" cellspacing=\"0\" style="
#~ "\"width:283px\">\n"
#~ "                <tbody>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\" width=\"89\"><strong>A</"
#~ "strong></td>\n"
#~ "                        <td width=\"194\">&nbsp;Add Drill Array</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>C</strong></td>\n"
#~ "                        <td>&nbsp;Copy Drill(s)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>D</strong></td>\n"
#~ "                        <td>&nbsp;Add Drill</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>J</strong></td>\n"
#~ "                        <td>&nbsp;Jump to Location (x, y)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>M</strong></td>\n"
#~ "                        <td>&nbsp;Move Drill(s)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\" width=\"89\"><strong>Q</"
#~ "strong></td>\n"
#~ "                        <td width=\"194\">&nbsp;Add Slot Array</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>R</strong></td>\n"
#~ "                        <td>&nbsp;Resize Drill(s)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>T</strong></td>\n"
#~ "                        <td>&nbsp;Add a new Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\" width=\"89\"><strong>W</"
#~ "strong></td>\n"
#~ "                        <td width=\"194\">&nbsp;Add Slot</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Del</strong></td>\n"
#~ "                        <td>&nbsp;Delete Drill(s)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Del</strong></td>\n"
#~ "                        <td>&nbsp;Alternate: Delete Tool(s)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ESC</strong></td>\n"
#~ "                        <td>&nbsp;Abort and return to Select</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Ctrl+S</strong></td>\n"
#~ "                        <td>&nbsp;Save Object and Exit Editor</td>\n"
#~ "                    </tr>\n"
#~ "                </tbody>\n"
#~ "            </table>\n"
#~ "            <br>\n"
#~ "            <br>\n"
#~ "            <strong><span style=\"color:#00ff00\">GERBER EDITOR</span></"
#~ "strong><br>\n"
#~ "            <table border=\"0\" cellpadding=\"0\" cellspacing=\"0\" style="
#~ "\"width:283px\">\n"
#~ "                <tbody>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\" width=\"89\"><strong>A</"
#~ "strong></td>\n"
#~ "                        <td width=\"194\">&nbsp;Add Pad Array</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>B</strong></td>\n"
#~ "                        <td>&nbsp;Buffer</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>C</strong></td>\n"
#~ "                        <td>&nbsp;Copy</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>D</strong></td>\n"
#~ "                        <td>&nbsp;Add Disc</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>E</strong></td>\n"
#~ "                        <td>&nbsp;Add SemiDisc</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>J</strong></td>\n"
#~ "                        <td>&nbsp;Jump to Location (x, y)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>M</strong></td>\n"
#~ "                        <td>&nbsp;Move</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>N</strong></td>\n"
#~ "                        <td>&nbsp;Add Region</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>P</strong></td>\n"
#~ "                        <td>&nbsp;Add Pad</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>R</strong></td>\n"
#~ "                        <td>&nbsp;Within Track & Region Tools will cycle "
#~ "in REVERSE the bend modes</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>S</strong></td>\n"
#~ "                        <td>&nbsp;Scale</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>T</strong></td>\n"
#~ "                        <td>&nbsp;Add Track</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>T</strong></td>\n"
#~ "                        <td>&nbsp;Within Track & Region Tools will cycle "
#~ "FORWARD the bend modes</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Del</strong></td>\n"
#~ "                        <td>&nbsp;Delete</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Del</strong></td>\n"
#~ "                        <td>&nbsp;Alternate: Delete Apertures</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ESC</strong></td>\n"
#~ "                        <td>&nbsp;Abort and return to Select</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Ctrl+E</strong></td>\n"
#~ "                        <td>&nbsp;Eraser Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Ctrl+S</strong></td>\n"
#~ "                        <td>&nbsp;Save Object and Exit Editor</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                     <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Alt+A</strong></td>\n"
#~ "                        <td>&nbsp;Mark Area Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Alt+N</strong></td>\n"
#~ "                        <td>&nbsp;Poligonize Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Alt+R</strong></td>\n"
#~ "                        <td>&nbsp;Transformation Tool</td>\n"
#~ "                    </tr>\n"
#~ "                </tbody>\n"
#~ "            </table>\n"
#~ "                    "
#~ msgstr ""
#~ "<b>Editor Shortcut list</b><br>\n"
#~ "            <br>\n"
#~ "            <strong><span style=\"color:#0000ff\">GEOMETRY EDITOR</span></"
#~ "strong><br>\n"
#~ "    \n"
#~ "            <table border=\"0\" cellpadding=\"0\" cellspacing=\"0\" style="
#~ "\"width:283px\">\n"
#~ "                <tbody>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\" width=\"89\"><strong>A</"
#~ "strong></td>\n"
#~ "                        <td width=\"194\">&nbsp;Draw an Arc</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>B</strong></td>\n"
#~ "                        <td>&nbsp;Buffer Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>C</strong></td>\n"
#~ "                        <td>&nbsp;Copy Geo Item</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>D</strong></td>\n"
#~ "                        <td>&nbsp;Within Add Arc will toogle the ARC "
#~ "direction: CW or CCW</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>E</strong></td>\n"
#~ "                        <td>&nbsp;Polygon Intersection Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>I</strong></td>\n"
#~ "                        <td>&nbsp;Paint Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>J</strong></td>\n"
#~ "                        <td>&nbsp;Jump to Location (x, y)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>K</strong></td>\n"
#~ "                        <td>&nbsp;Toggle Corner Snap</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>M</strong></td>\n"
#~ "                        <td>&nbsp;Move Geo Item</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>M</strong></td>\n"
#~ "                        <td>&nbsp;Within Add Arc will cycle through the "
#~ "ARC modes</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>N</strong></td>\n"
#~ "                        <td>&nbsp;Draw a Polygon</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>O</strong></td>\n"
#~ "                        <td>&nbsp;Draw a Circle</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>P</strong></td>\n"
#~ "                        <td>&nbsp;Draw a Path</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>R</strong></td>\n"
#~ "                        <td>&nbsp;Draw Rectangle</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>S</strong></td>\n"
#~ "                        <td>&nbsp;Polygon Substraction Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>T</strong></td>\n"
#~ "                        <td>&nbsp;Add Text Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>U</strong></td>\n"
#~ "                        <td>&nbsp;Polygon Union Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>X</strong></td>\n"
#~ "                        <td>&nbsp;Flip shape on X axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Y</strong></td>\n"
#~ "                        <td>&nbsp;Flip shape on Y axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Shift+X</strong></td>\n"
#~ "                        <td>&nbsp;Skew shape on X axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Shift+Y</strong></td>\n"
#~ "                        <td>&nbsp;Skew shape on Y axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Alt+R</strong></td>\n"
#~ "                        <td>&nbsp;Editor Transformation Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Alt+X</strong></td>\n"
#~ "                        <td>&nbsp;Offset shape on X axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Alt+Y</strong></td>\n"
#~ "                        <td>&nbsp;Offset shape on Y axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Ctrl+M</strong></td>\n"
#~ "                        <td>&nbsp;Measurement Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Ctrl+S</strong></td>\n"
#~ "                        <td>&nbsp;Save Object and Exit Editor</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Ctrl+X</strong></td>\n"
#~ "                        <td>&nbsp;Polygon Cut Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Space</strong></td>\n"
#~ "                        <td>&nbsp;Rotate Geometry</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ENTER</strong></td>\n"
#~ "                        <td>&nbsp;Finish drawing for certain tools</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ESC</strong></td>\n"
#~ "                        <td>&nbsp;Abort and return to Select</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Del</strong></td>\n"
#~ "                        <td>&nbsp;Delete Shape</td>\n"
#~ "                    </tr>\n"
#~ "                </tbody>\n"
#~ "            </table>\n"
#~ "            <br>\n"
#~ "            <br>\n"
#~ "            <strong><span style=\"color:#ff0000\">EXCELLON EDITOR</span></"
#~ "strong><br>\n"
#~ "            <table border=\"0\" cellpadding=\"0\" cellspacing=\"0\" style="
#~ "\"width:283px\">\n"
#~ "                <tbody>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\" width=\"89\"><strong>A</"
#~ "strong></td>\n"
#~ "                        <td width=\"194\">&nbsp;Add Drill Array</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>C</strong></td>\n"
#~ "                        <td>&nbsp;Copy Drill(s)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>D</strong></td>\n"
#~ "                        <td>&nbsp;Add Drill</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>J</strong></td>\n"
#~ "                        <td>&nbsp;Jump to Location (x, y)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>M</strong></td>\n"
#~ "                        <td>&nbsp;Move Drill(s)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\" width=\"89\"><strong>Q</"
#~ "strong></td>\n"
#~ "                        <td width=\"194\">&nbsp;Add Slot Array</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>R</strong></td>\n"
#~ "                        <td>&nbsp;Resize Drill(s)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>T</strong></td>\n"
#~ "                        <td>&nbsp;Add a new Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\" width=\"89\"><strong>W</"
#~ "strong></td>\n"
#~ "                        <td width=\"194\">&nbsp;Add Slot</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Del</strong></td>\n"
#~ "                        <td>&nbsp;Delete Drill(s)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Del</strong></td>\n"
#~ "                        <td>&nbsp;Alternate: Delete Tool(s)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ESC</strong></td>\n"
#~ "                        <td>&nbsp;Abort and return to Select</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Ctrl+S</strong></td>\n"
#~ "                        <td>&nbsp;Save Object and Exit Editor</td>\n"
#~ "                    </tr>\n"
#~ "                </tbody>\n"
#~ "            </table>\n"
#~ "            <br>\n"
#~ "            <br>\n"
#~ "            <strong><span style=\"color:#00ff00\">GERBER EDITOR</span></"
#~ "strong><br>\n"
#~ "            <table border=\"0\" cellpadding=\"0\" cellspacing=\"0\" style="
#~ "\"width:283px\">\n"
#~ "                <tbody>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\" width=\"89\"><strong>A</"
#~ "strong></td>\n"
#~ "                        <td width=\"194\">&nbsp;Add Pad Array</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>B</strong></td>\n"
#~ "                        <td>&nbsp;Buffer</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>C</strong></td>\n"
#~ "                        <td>&nbsp;Copy</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>D</strong></td>\n"
#~ "                        <td>&nbsp;Add Disc</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>E</strong></td>\n"
#~ "                        <td>&nbsp;Add SemiDisc</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>J</strong></td>\n"
#~ "                        <td>&nbsp;Jump to Location (x, y)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>M</strong></td>\n"
#~ "                        <td>&nbsp;Move</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>N</strong></td>\n"
#~ "                        <td>&nbsp;Add Region</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>P</strong></td>\n"
#~ "                        <td>&nbsp;Add Pad</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>R</strong></td>\n"
#~ "                        <td>&nbsp;Within Track & Region Tools will cycle "
#~ "in REVERSE the bend modes</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>S</strong></td>\n"
#~ "                        <td>&nbsp;Scale</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>T</strong></td>\n"
#~ "                        <td>&nbsp;Add Track</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>T</strong></td>\n"
#~ "                        <td>&nbsp;Within Track & Region Tools will cycle "
#~ "FORWARD the bend modes</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Del</strong></td>\n"
#~ "                        <td>&nbsp;Delete</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Del</strong></td>\n"
#~ "                        <td>&nbsp;Alternate: Delete Apertures</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ESC</strong></td>\n"
#~ "                        <td>&nbsp;Abort and return to Select</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Ctrl+E</strong></td>\n"
#~ "                        <td>&nbsp;Eraser Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Ctrl+S</strong></td>\n"
#~ "                        <td>&nbsp;Save Object and Exit Editor</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                     <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Alt+A</strong></td>\n"
#~ "                        <td>&nbsp;Mark Area Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Alt+N</strong></td>\n"
#~ "                        <td>&nbsp;Poligonize Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Alt+R</strong></td>\n"
#~ "                        <td>&nbsp;Transformation Tool</td>\n"
#~ "                    </tr>\n"
#~ "                </tbody>\n"
#~ "            </table>\n"
#~ "                    "

#~ msgid "[success] Done."
#~ msgstr "[success] Done."

#~ msgid "[WARNING_NOTCL] Cancelled."
#~ msgstr "[WARNING_NOTCL] Cancelled."

#~ msgid "[success] Added new tool with dia: {dia} {units}"
#~ msgstr "[success] Added new tool with dia: {dia} {units}"

#~ msgid "[WARNING_NOTCL] Application is saving the project. Please wait ..."
#~ msgstr "[WARNING_NOTCL] Application is saving the project. Please wait ..."

#~ msgid "<b>%s:</b>"
#~ msgstr "<b>%s:</b>"

#~ msgid "%s:"
#~ msgstr "%s:"

#~| msgid "[ERROR_NOTCL] Object not found: %s"
#~ msgid "Object not found: %s"
#~ msgstr "Object not found: %s"

#~ msgid "[success] Opened: %s"
#~ msgstr "[success] Opened: %s"

#~ msgid "[success] Paint All Done."
#~ msgstr "[success] Paint All Done."

#~| msgid ""
#~| "[ERROR] Could not do Paint All. Try a different combination of "
#~| "parameters. Or a different Method of paint\n"
#~| "%s"
#~ msgid ""
#~ "Could not do Paint All. Try a different combination of parameters. Or a "
#~ "different Method of paint\n"
#~ "%s"
#~ msgstr ""
#~ "Could not do Paint All. Try a different combination of parameters. Or a "
#~ "different Method of paint\n"
#~ "%s"

#~| msgid "[success] Paint All Done."
#~ msgid "[success] Paint Area Done."
#~ msgstr "[success] Paint Area Done."

#~ msgid "Generating panel ... Please wait."
#~ msgstr "Generating panel ... Please wait."

#~ msgid "...processing... [%s]"
#~ msgstr "...processing... [%s]"

#~ msgid "Parsing aperture %s geometry ..."
#~ msgstr "Parsing aperture %s geometry ..."

#~ msgid "[success] Skew on the %s axis done ..."
#~ msgstr "[success] Skew on the %s axis done ..."

#~ msgid "[ERROR_NOTCL] Could not load defaults file."
#~ msgstr "[ERROR_NOTCL] Could not load defaults file."

#~ msgid "[ERROR_NOTCL] Failed to parse defaults file."
#~ msgstr "[ERROR_NOTCL] Failed to parse defaults file."

#~ msgid "[ERROR_NOTCL] An internal error has ocurred. See shell.\n"
#~ msgstr "[ERROR_NOTCL] An internal error has ocurred. See shell.\n"

#~ msgid "[success] Defaults saved."
#~ msgstr "[success] Defaults saved."

#~ msgid "[success] Converted units to %s"
#~ msgstr "[success] Converted units to %s"

#~ msgid "[WARNING_NOTCL] Export Code cancelled."
#~ msgstr "[WARNING_NOTCL] Export Code cancelled."

#~ msgid "[success] Origin set ..."
#~ msgstr "[success] Origin set ..."

#~ msgid "[success] Skew on X axis done."
#~ msgstr "[success] Skew on X axis done."

#~ msgid "[success] Skew on Y axis done."
#~ msgstr "[success] Skew on Y axis done."

#~ msgid "[success] New Grid added ..."
#~ msgstr "[success] New Grid added ..."

#~ msgid "[WARNING_NOTCL] Open Gerber cancelled."
#~ msgstr "[WARNING_NOTCL] Open Gerber cancelled."

#~ msgid "[WARNING_NOTCL] Open G-Code cancelled."
#~ msgstr "[WARNING_NOTCL] Open G-Code cancelled."

#~ msgid "[WARNING_NOTCL] Open Project cancelled."
#~ msgstr "[WARNING_NOTCL] Open Project cancelled."

#~ msgid "[WARNING_NOTCL] Open Config cancelled."
#~ msgstr "[WARNING_NOTCL] Open Config cancelled."

#~ msgid "[WARNING_NOTCL] No object selected."
#~ msgstr "[WARNING_NOTCL] No object selected."

#~ msgid "[WARNING_NOTCL] Export SVG cancelled."
#~ msgstr "[WARNING_NOTCL] Export SVG cancelled."

#~ msgid "[WARNING_NOTCL] Export Excellon cancelled."
#~ msgstr "[WARNING_NOTCL] Export Excellon cancelled."

#~ msgid "[WARNING_NOTCL] Export Gerber cancelled."
#~ msgstr "[WARNING_NOTCL] Export Gerber cancelled."

#~ msgid "[WARNING_NOTCL] Export DXF cancelled."
#~ msgstr "[WARNING_NOTCL] Export DXF cancelled."

#~ msgid "[WARNING_NOTCL] Open SVG cancelled."
#~ msgstr "[WARNING_NOTCL] Open SVG cancelled."

#~ msgid "[WARNING_NOTCL] Open DXF cancelled."
#~ msgstr "[WARNING_NOTCL] Open DXF cancelled."

#~ msgid "[WARNING_NOTCL] No object Box. Using instead %s"
#~ msgstr "[WARNING_NOTCL] No object Box. Using instead %s"

#~ msgid "[ERROR_NOTCL] Failed to parse file: {name}. {error}"
#~ msgstr "[ERROR_NOTCL] Failed to parse file: {name}. {error}"

#~ msgid "[ERROR_NOTCL] An internal error has occurred. See shell.\n"
#~ msgstr "[ERROR_NOTCL] An internal error has occurred. See shell.\n"

#~ msgid "[ERROR_NOTCL] Failed to verify project file: %s. Retry to save it."
#~ msgstr "[ERROR_NOTCL] Failed to verify project file: %s. Retry to save it."

#~ msgid ""
#~ "[ERROR_NOTCL] Failed to parse saved project file: %s. Retry to save it."
#~ msgstr ""
#~ "[ERROR_NOTCL] Failed to parse saved project file: %s. Retry to save it."

#~ msgid "[ERROR_NOTCL] Failed to save project file: %s. Retry to save it."
#~ msgstr "[ERROR_NOTCL] Failed to save project file: %s. Retry to save it."

#~ msgid "[ERROR_NOTCL] Wrong value format entered, use a number."
#~ msgstr "[ERROR_NOTCL] Wrong value format entered, use a number."

#~ msgid "[ERROR_NOTCL] Cancelled. Empty file, it has no geometry..."
#~ msgstr "[ERROR_NOTCL] Cancelled. Empty file, it has no geometry..."

#~ msgid "[WARNING_NOTCL] Export Machine Code cancelled ..."
#~ msgstr "[WARNING_NOTCL] Export Machine Code cancelled ..."

#~ msgid "[WARNING_NOTCL] No such file or directory"
#~ msgstr "[WARNING_NOTCL] No such file or directory"

#~ msgid "[ERROR_NOTCL] The value is mistyped. Check the value. %s"
#~ msgstr "[ERROR_NOTCL] The value is mistyped. Check the value. %s"

#~ msgid "[ERROR_NOTCL] Cancelled."
#~ msgstr "[ERROR_NOTCL] Cancelled."

#~ msgid "Tool Dia:"
#~ msgstr "Tool Dia:"

#~ msgid "Nr of drills:"
#~ msgstr "Nr of drills:"

#~ msgid "Direction:"
#~ msgstr "Direction:"

#~ msgid "Pitch:"
#~ msgstr "Pitch:"

#~ msgid "Length:"
#~ msgstr "Length:"

#~ msgid "Nr of slots:"
#~ msgstr "Nr of slots:"

#~ msgid "[success] Deleted tool with dia: {del_dia} {units}"
#~ msgstr "[success] Deleted tool with dia: {del_dia} {units}"

#~ msgid "Tool dia:"
#~ msgstr "Tool dia:"

#~ msgid "Overlap Rate:"
#~ msgstr "Overlap Rate:"

#~ msgid "Method:"
#~ msgstr "Method:"

#~ msgid "[ERROR_NOTCL] Wrong value format entered for Rotate, use a number."
#~ msgstr "[ERROR_NOTCL] Wrong value format entered for Rotate, use a number."

#~ msgid "[ERROR_NOTCL] Wrong value format entered for Skew X, use a number."
#~ msgstr "[ERROR_NOTCL] Wrong value format entered for Skew X, use a number."

#~ msgid "[ERROR_NOTCL] Wrong value format entered for Skew Y, use a number."
#~ msgstr "[ERROR_NOTCL] Wrong value format entered for Skew Y, use a number."

#~ msgid "[ERROR_NOTCL] Wrong value format entered for Scale X, use a number."
#~ msgstr "[ERROR_NOTCL] Wrong value format entered for Scale X, use a number."

#~ msgid "[ERROR_NOTCL] Wrong value format entered for Scale Y, use a number."
#~ msgstr "[ERROR_NOTCL] Wrong value format entered for Scale Y, use a number."

#~ msgid "[ERROR_NOTCL] Wrong value format entered for Offset X, use a number."
#~ msgstr ""
#~ "[ERROR_NOTCL] Wrong value format entered for Offset X, use a number."

#~ msgid "[ERROR_NOTCL] Wrong value format entered for Offset Y, use a number."
#~ msgstr ""
#~ "[ERROR_NOTCL] Wrong value format entered for Offset Y, use a number."

#~ msgid "[success] Flip on the Y axis done ..."
#~ msgstr "[success] Flip on the Y axis done ..."

#~ msgid "[success] Flip on the X axis done ..."
#~ msgstr "[success] Flip on the X axis done ..."

#~ msgid "[success] Offset on the %s axis done ..."
#~ msgstr "[success] Offset on the %s axis done ..."

#~ msgid ""
#~ "[WARNING_NOTCL] Editing MultiGeo Geometry, tool: {tool} with diameter: "
#~ "{dia}"
#~ msgstr ""
#~ "[WARNING_NOTCL] Editing MultiGeo Geometry, tool: {tool} with diameter: "
#~ "{dia}"

#~ msgid "Clear GUI Settings:"
#~ msgstr "Clear GUI Settings:"

#~ msgid "Duration:"
#~ msgstr "Duration:"

#~ msgid "Fast Plunge:"
#~ msgstr "Fast Plunge:"

#~ msgid "Linear Dir.:"
#~ msgstr "Linear Dir.:"

#~ msgid "Plot kind:"
#~ msgstr "Plot kind:"

#~ msgid ""
#~ "Select from the Tools Table above\n"
#~ "the tools you want to include."
#~ msgstr ""
#~ "Select from the Tools Table above\n"
#~ "the tools you want to include."

#~ msgid ""
#~ "[WARNING_NOTCL] Tool Diameter is zero value. Change it to a positive real "
#~ "number."
#~ msgstr ""
#~ "[WARNING_NOTCL] Tool Diameter is zero value. Change it to a positive real "
#~ "number."

#~ msgid "[success] Gerber %s was mirrored..."
#~ msgstr "[success] Gerber %s was mirrored..."

#~ msgid "[success] Excellon %s was mirrored..."
#~ msgstr "[success] Excellon %s was mirrored..."

#~ msgid "[success] Geometry %s was mirrored..."
#~ msgstr "[success] Geometry %s was mirrored..."

#~ msgid "[WARNING_NOTCL] No object(s) selected."
#~ msgstr "[WARNING_NOTCL] No object(s) selected."

#~ msgid "[success] %s object was moved ..."
#~ msgstr "[success] %s object was moved ..."

#~ msgid "[WARNING_NOTCL] Object(s) not selected"
#~ msgstr "[WARNING_NOTCL] Object(s) not selected"

#~ msgid "[WARNING_NOTCL] Buffering ..."
#~ msgstr "[WARNING_NOTCL] Buffering ..."

#~ msgid "[success] Non-Copper Clearing with ToolDia = %s started."
#~ msgstr "[success] Non-Copper Clearing with ToolDia = %s started."

#~ msgid "[ERROR_NOTCL] NCCTool.clear_non_copper() --> %s"
#~ msgstr "[ERROR_NOTCL] NCCTool.clear_non_copper() --> %s"

#~ msgid "[success] NCC Tool finished."
#~ msgstr "[success] NCC Tool finished."

#~ msgid ""
#~ "[WARNING_NOTCL] NCC Tool finished but some PCB features could not be "
#~ "cleared. Check the result."
#~ msgstr ""
#~ "[WARNING_NOTCL] NCC Tool finished but some PCB features could not be "
#~ "cleared. Check the result."

#~ msgid "[success] Non-Copper Rest Clearing with ToolDia = %s started."
#~ msgstr "[success] Non-Copper Rest Clearing with ToolDia = %s started."

#~ msgid "[ERROR_NOTCL] NCCTool.clear_non_copper_rest() --> %s"
#~ msgstr "[ERROR_NOTCL] NCCTool.clear_non_copper_rest() --> %s"

#~ msgid ""
#~ "[ERROR_NOTCL] NCC Tool finished but could not clear the object with "
#~ "current settings."
#~ msgstr ""
#~ "[ERROR_NOTCL] NCC Tool finished but could not clear the object with "
#~ "current settings."

#~ msgid "[WARNING_NOTCL] Open PDF cancelled."
#~ msgstr "[WARNING_NOTCL] Open PDF cancelled."

#~ msgid "[ERROR_NOTCL] Open PDF file failed."
#~ msgstr "[ERROR_NOTCL] Open PDF file failed."

#~ msgid "[success] Rendered: %s"
#~ msgstr "[success] Rendered: %s"

#~ msgid ""
#~ "How to select the polygons to paint.<BR>Options:<BR>- <B>Single Polygons</"
#~ "B>: left mouse click on the polygon to be painted.<BR>- <B>Area "
#~ "Selection</B>: left mouse click to start selection of the area to be "
#~ "painted.<BR>- <B>All Polygons</B>: paint all polygons.<BR>- <B>Reference "
#~ "Object</B>: paint an area described by an external reference object."
#~ msgstr ""
#~ "How to select the polygons to paint.<BR>Options:<BR>- <B>Single Polygons</"
#~ "B>: left mouse click on the polygon to be painted.<BR>- <B>Area "
#~ "Selection</B>: left mouse click to start selection of the area to be "
#~ "painted.<BR>- <B>All Polygons</B>: paint all polygons.<BR>- <B>Reference "
#~ "Object</B>: paint an area described by an external reference object."

#~ msgid ""
#~ "[ERROR_NOTCL] There is no Painting Geometry in the file.\n"
#~ "Usually it means that the tool diameter is too big for the painted "
#~ "geometry.\n"
#~ "Change the painting parameters and try again."
#~ msgstr ""
#~ "[ERROR_NOTCL] There is no Painting Geometry in the file.\n"
#~ "Usually it means that the tool diameter is too big for the painted "
#~ "geometry.\n"
#~ "Change the painting parameters and try again."

#~ msgid "[WARNING_NOTCL]No object Box. Using instead %s"
#~ msgstr "[WARNING_NOTCL]No object Box. Using instead %s"

#~ msgid "[success] Imported: %s"
#~ msgstr "[success] Imported: %s"

#~ msgid "[ERROR_NOTCL] Generating new object failed."
#~ msgstr "[ERROR_NOTCL] Generating new object failed."

#~ msgid "[success] Created: %s"
#~ msgstr "[success] Created: %s"

#~ msgid "[success] Rotate done ..."
#~ msgstr "[success] Rotate done ..."

#~ msgid ""
#~ "When choosing the 'Itself' option the non copper clearing extent\n"
#~ "is based on the object that is copper cleared.\n"
#~ " Choosing the 'Box' option will do non copper clearing within the box\n"
#~ "specified by another object different than the one that is copper cleared."
#~ msgstr ""
#~ "When choosing the 'Itself' option the non copper clearing extent\n"
#~ "is based on the object that is copper cleared.\n"
#~ " Choosing the 'Box' option will do non copper clearing within the box\n"
#~ "specified by another object different than the one that is copper cleared."

#~ msgid ""
#~ "How to select the polygons to paint.<BR>Options:<BR>- <B>Single</B>: left "
#~ "mouse click on the polygon to be painted.<BR>- <B>Area</B>: left mouse "
#~ "click to start selection of the area to be painted.<BR>- <B>All</B>: "
#~ "paint all polygons.<BR>- <B>Ref</B>: paint an area described by an "
#~ "external reference object."
#~ msgstr ""
#~ "How to select the polygons to paint.<BR>Options:<BR>- <B>Single</B>: left "
#~ "mouse click on the polygon to be painted.<BR>- <B>Area</B>: left mouse "
#~ "click to start selection of the area to be painted.<BR>- <B>All</B>: "
#~ "paint all polygons.<BR>- <B>Ref</B>: paint an area described by an "
#~ "external reference object."

#~ msgid "Geometry object to be painted.                        "
#~ msgstr "Geometry object to be painted.                        "

#~ msgid ""
#~ "After clicking here, click inside<BR>the polygon you wish to be painted "
#~ "if <B>Single</B> is selected.<BR>If <B>Area</B> is selected, then the "
#~ "selection of the area to be painted<BR>will be initiated by a first click "
#~ "and finished by the second mouse click.<BR>If <B>All</B>  is selected "
#~ "then the Paint will start after click.<BR>If <B>Ref</B>  is selected then "
#~ "the Paint will start after click,<BR>and the painted area will be "
#~ "described by a selected object.<BR>A new Geometry object with the tool "
#~ "paths will be created."
#~ msgstr ""
#~ "After clicking here, click inside<BR>the polygon you wish to be painted "
#~ "if <B>Single</B> is selected.<BR>If <B>Area</B> is selected, then the "
#~ "selection of the area to be painted<BR>will be initiated by a first click "
#~ "and finished by the second mouse click.<BR>If <B>All</B>  is selected "
#~ "then the Paint will start after click.<BR>If <B>Ref</B>  is selected then "
#~ "the Paint will start after click,<BR>and the painted area will be "
#~ "described by a selected object.<BR>A new Geometry object with the tool "
#~ "paths will be created."

#~ msgid "<b>Apertures:</b>"
#~ msgstr "<b>Apertures:</b>"

#~ msgid "Aperture Code:"
#~ msgstr "Aperture Code:"

#~ msgid "<b>Languages:</b>"
#~ msgstr "<b>Languages:</b>"

#~ msgid "Width (# passes):"
#~ msgstr "Width (# passes):"

#~| msgid "<b>Clear non-copper:</b>"
#~ msgid "Clear non-copper"
#~ msgstr "Clear non-copper"

#~ msgid "Rounded corners"
#~ msgstr "Rounded corners"

#~ msgid ""
#~ "Creates a Geometry objects with polygons\n"
#~ "covering the copper-free areas of the PCB."
#~ msgstr ""
#~ "Creates a Geometry objects with polygons\n"
#~ "covering the copper-free areas of the PCB."

#~ msgid "<b>Bounding Box:</b>"
#~ msgstr "<b>Bounding Box:</b>"

#~ msgid "<b>Units</b>:"
#~ msgstr "<b>Units</b>:"

#~ msgid "<b>Zeros</b>:"
#~ msgstr "<b>Zeros</b>:"

#~ msgid "INCH:"
#~ msgstr "INCH:"

#~ msgid "Tool change:"
#~ msgstr "Tool change:"

#~ msgid "Toolchange Z position."
#~ msgstr "Toolchange Z position."

#~ msgid ""
#~ "Tool speed while drilling\n"
#~ "(in units per minute)."
#~ msgstr ""
#~ "Tool speed while drilling\n"
#~ "(in units per minute)."

#~ msgid "<b>Gcode:    </b>"
#~ msgstr "<b>Gcode:    </b>"

#~ msgid "Offset Z:"
#~ msgstr "Offset Z:"

#~ msgid "<b>Slots:</b>"
#~ msgstr "<b>Slots:</b>"

#~ msgid "<b>Create CNC Job:</b>"
#~ msgstr "<b>Create CNC Job:</b>"

#~ msgid "Multidepth"
#~ msgstr "Multidepth"

#~ msgid "Multidepth usage: True or False."
#~ msgstr "Multidepth usage: True or False."

#~ msgid ""
#~ "The preprocessor file that dictates\n"
#~ "Machine Code output."
#~ msgstr ""
#~ "The preprocessor file that dictates\n"
#~ "Machine Code output."

#~ msgid "Display Annotation:"
#~ msgstr "Display Annotation:"

#~ msgid ""
#~ "Type here any G-Code commands you would\n"
#~ "like to be executed when Toolchange event is encountered.\n"
#~ "This will constitute a Custom Toolchange GCode,\n"
#~ "or a Toolchange Macro."
#~ msgstr ""
#~ "Type here any G-Code commands you would\n"
#~ "like to be executed when Toolchange event is encountered.\n"
#~ "This will constitute a Custom Toolchange GCode,\n"
#~ "or a Toolchange Macro."

#~ msgid ""
#~ "If checked, use 'rest machining'.\n"
#~ "Basically it will clear copper outside PCB features,\n"
#~ "using the biggest tool and continue with the next tools,\n"
#~ "from bigger to smaller, to clear areas of copper that\n"
#~ "could not be cleared by previous tool.\n"
#~ "If not checked, use the standard algorithm."
#~ msgstr ""
#~ "If checked, use 'rest machining'.\n"
#~ "Basically it will clear copper outside PCB features,\n"
#~ "using the biggest tool and continue with the next tools,\n"
#~ "from bigger to smaller, to clear areas of copper that\n"
#~ "could not be cleared by previous tool.\n"
#~ "If not checked, use the standard algorithm."

#~ msgid "Offset:"
#~ msgstr "Offset:"

#~ msgid ""
#~ "Distance from objects at which\n"
#~ "to draw the cutout."
#~ msgstr ""
#~ "Distance from objects at which\n"
#~ "to draw the cutout."

#~ msgid ""
#~ "Size of the gaps in the toolpath\n"
#~ "that will remain to hold the\n"
#~ "board in place."
#~ msgstr ""
#~ "Size of the gaps in the toolpath\n"
#~ "that will remain to hold the\n"
#~ "board in place."

#~ msgid "Create a convex shape surrounding the entire PCB."
#~ msgstr "Create a convex shape surrounding the entire PCB."

#~ msgid ""
#~ "The axis should pass through a <b>point</b> or cut\n"
#~ " a specified <b>box</b> (in a Geometry object) in \n"
#~ "the middle."
#~ msgstr ""
#~ "The axis should pass through a <b>point</b> or cut\n"
#~ " a specified <b>box</b> (in a Geometry object) in \n"
#~ "the middle."

#~ msgid "Panel Type:"
#~ msgstr "Panel Type:"

#~ msgid "Tip angle:"
#~ msgstr "Tip angle:"

#~ msgid "Angle for rotation. In degrees."
#~ msgstr "Angle for rotation. In degrees."

#~ msgid "Angle for Skew/Shear on X axis. In degrees."
#~ msgstr "Angle for Skew/Shear on X axis. In degrees."

#~ msgid "Angle for Skew/Shear on Y axis. In degrees."
#~ msgstr "Angle for Skew/Shear on Y axis. In degrees."

#~ msgid "XY Toolchange:"
#~ msgstr "XY Toolchange:"

#~ msgid "PostProcessors:"
#~ msgstr "PostProcessors:"

#~ msgid "<b>Scale:</b>"
#~ msgstr "<b>Scale:</b>"

#~ msgid "<b>Offset:</b>"
#~ msgstr "<b>Offset:</b>"

#~ msgid "<b>Tools Table</b>"
#~ msgstr "<b>Tools Table</b>"

#~ msgid ""
#~ "Tool height just before starting the work.\n"
#~ "Delete the value if you don't need this feature."
#~ msgstr ""
#~ "Tool height just before starting the work.\n"
#~ "Delete the value if you don't need this feature."

#~ msgid ""
#~ "Z-axis position (height) for\n"
#~ "the last move."
#~ msgstr ""
#~ "Z-axis position (height) for\n"
#~ "the last move."

#~ msgid ""
#~ "The json file that dictates\n"
#~ "gcode output."
#~ msgstr ""
#~ "The json file that dictates\n"
#~ "gcode output."

#~ msgid "<b>Type:    </b>"
#~ msgstr "<b>Type:    </b>"

#~ msgid "Drills Tool dia:"
#~ msgstr "Drills Tool dia:"

#~ msgid "Slots Tool dia:"
#~ msgstr "Slots Tool dia:"

#~ msgid "<b>Tool Dia:</b>"
#~ msgstr "<b>Tool Dia:</b>"

#~ msgid "<b>Tool Data</b>"
#~ msgstr "<b>Tool Data</b>"

#~ msgid ""
#~ "This is the height (Z) at which the CNC\n"
#~ "will go as the last move."
#~ msgstr ""
#~ "This is the height (Z) at which the CNC\n"
#~ "will go as the last move."

#~ msgid "Feed Rate Z (Plunge):"
#~ msgstr "Feed Rate Z (Plunge):"

#~ msgid ""
#~ "Cutting speed in the Z\n"
#~ "plane in units per minute"
#~ msgstr ""
#~ "Cutting speed in the Z\n"
#~ "plane in units per minute"

#~ msgid ""
#~ "Cutting speed in the XY\n"
#~ "plane in units per minute\n"
#~ "(in units per minute).\n"
#~ "This is for the rapid move G00.\n"
#~ "It is useful only for Marlin,\n"
#~ "ignore for any other cases."
#~ msgstr ""
#~ "Cutting speed in the XY\n"
#~ "plane in units per minute\n"
#~ "(in units per minute).\n"
#~ "This is for the rapid move G00.\n"
#~ "It is useful only for Marlin,\n"
#~ "ignore for any other cases."

#~ msgid "Cut over 1st pt"
#~ msgstr "Cut over 1st pt"

#~ msgid "<b>Paint Area:</b>"
#~ msgstr "<b>Paint Area:</b>"

#~ msgid "<b>CNC Tools Table</b>"
#~ msgstr "<b>CNC Tools Table</b>"

#~ msgid ""
#~ "Type here any G-Code commands you would\n"
#~ "like to add to the beginning of the generated file."
#~ msgstr ""
#~ "Type here any G-Code commands you would\n"
#~ "like to add to the beginning of the generated file."

#~ msgid ""
#~ "This is the diameter of the tool tip.\n"
#~ "The manufacturer specifies it."
#~ msgstr ""
#~ "This is the diameter of the tool tip.\n"
#~ "The manufacturer specifies it."

#~ msgid "Object:"
#~ msgstr "Object:"

#~ msgid "Units:"
#~ msgstr "Units:"

#~ msgid ""
#~ "- 'Itself': the non copper clearing extent\n"
#~ "is based on the object that is copper cleared.\n"
#~ " - 'Box': will do non copper clearing within the box\n"
#~ "specified by the object selected in the Ref. Object combobox."
#~ msgstr ""
#~ "- 'Itself': the non copper clearing extent\n"
#~ "is based on the object that is copper cleared.\n"
#~ " - 'Box': will do non copper clearing within the box\n"
#~ "specified by the object selected in the Ref. Object combobox."

#~ msgid "Geometry:"
#~ msgstr "Geometry:"

#~ msgid ""
#~ "Scale the selected object(s)\n"
#~ "using the Scale Factor X for both axis."
#~ msgstr ""
#~ "Scale the selected object(s)\n"
#~ "using the Scale Factor X for both axis."

#~ msgid "<b>Excellon Format:</b>"
#~ msgstr "<b>Excellon Format:</b>"

#~ msgid "<b>Tools:</b>"
#~ msgstr "<b>Tools:</b>"

#~ msgid "<b>Export G-Code:</b>"
#~ msgstr "<b>Export G-Code:</b>"

#~ msgid "How to select the polygons to paint."
#~ msgstr "How to select the polygons to paint."

#~ msgid "<b>V-Shape Tool Calculator:</b>"
#~ msgstr "<b>V-Shape Tool Calculator:</b>"

#~ msgid "<b>ElectroPlating Calculator:</b>"
#~ msgstr "<b>ElectroPlating Calculator:</b>"

#~ msgid "<b>Name:</b>"
#~ msgstr "<b>Name:</b>"

#~ msgid "<b>Plot kind:</b>"
#~ msgstr "<b>Plot kind:</b>"

#~ msgid "<b>Display Annotation:</b>"
#~ msgstr "<b>Display Annotation:</b>"

#~ msgid "<b>GERBER:</b>"
#~ msgstr "<b>GERBER:</b>"

#~ msgid "<b>EXCELLON:</b>"
#~ msgstr "<b>EXCELLON:</b>"

#~ msgid "<b>GEOMETRY</b>:"
#~ msgstr "<b>GEOMETRY</b>:"

#~ msgid "<b>Panel Type:</b>"
#~ msgstr "<b>Panel Type:</b>"

#~ msgid "<b>Excellon format:</b>"
#~ msgstr "<b>Excellon format:</b>"

#~ msgid "<b>Gerber Objects</b>"
#~ msgstr "<b>Gerber Objects</b>"

#~ msgid "<b>Geometry Objects</b>"
#~ msgstr "<b>Geometry Objects</b>"

#~ msgid "Save &Defaults"
#~ msgstr "Save &Defaults"

#~ msgid "Tool dia:                   "
#~ msgstr "Tool dia:                   "

#~ msgid ""
#~ "The diameter of the cutting\n"
#~ "tool.."
#~ msgstr ""
#~ "The diameter of the cutting\n"
#~ "tool.."

#~ msgid "[WARNING_NOTCL] Move cancelled. No shape selected."
#~ msgstr "[WARNING_NOTCL] Move cancelled. No shape selected."

#~ msgid "Copy as &Geom"
#~ msgstr "Copy as &Geom"

#~ msgid ""
#~ "Change the size of the selected apertures.\n"
#~ "Factor by which to multiply\n"
#~ "geometric features of this object."
#~ msgstr ""
#~ "Change the size of the selected apertures.\n"
#~ "Factor by which to multiply\n"
#~ "geometric features of this object."

#~ msgid "Ap. Buffer Factor:"
#~ msgstr "Ap. Buffer Factor:"

#~ msgid ""
#~ "Change the size of the selected apertures.\n"
#~ "Factor by which to expand/shrink\n"
#~ "geometric features of this object."
#~ msgstr ""
#~ "Change the size of the selected apertures.\n"
#~ "Factor by which to expand/shrink\n"
#~ "geometric features of this object."

#~ msgid "Out"
#~ msgstr "Out"

#~ msgid "Pos"
#~ msgstr "Pos"

#~ msgid "Neg"
#~ msgstr "Neg"

#~ msgid "Solid   "
#~ msgstr "Solid   "

#~ msgid "M-Color   "
#~ msgstr "M-Color   "

#~ msgid "Click on CENTER ..."
#~ msgstr "Click on CENTER ..."

#~ msgid "[success] Done. Region completed."
#~ msgstr "[success] Done. Region completed."

#~ msgid "Del Aperture:"
#~ msgstr "Del Aperture:"

#~ msgid ""
#~ "Delete a aperture in the aperture list.\n"
#~ "It will delete also the associated geometry."
#~ msgstr ""
#~ "Delete a aperture in the aperture list.\n"
#~ "It will delete also the associated geometry."

#~ msgid "Save && Close Edit"
#~ msgstr "Save && Close Edit"

#~ msgid ""
#~ "<b>Editor Shortcut list</b><br>\n"
#~ "            <br>\n"
#~ "            <strong><span style=\"color:#0000ff\">GEOMETRY EDITOR</span></"
#~ "strong><br>\n"
#~ "    \n"
#~ "            <table border=\"0\" cellpadding=\"0\" cellspacing=\"0\" style="
#~ "\"width:283px\">\n"
#~ "                <tbody>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\" width=\"89\"><strong>A</"
#~ "strong></td>\n"
#~ "                        <td width=\"194\">&nbsp;Draw an Arc</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>B</strong></td>\n"
#~ "                        <td>&nbsp;Buffer Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>C</strong></td>\n"
#~ "                        <td>&nbsp;Copy Geo Item</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>E</strong></td>\n"
#~ "                        <td>&nbsp;Polygon Intersection Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>I</strong></td>\n"
#~ "                        <td>&nbsp;Paint Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>J</strong></td>\n"
#~ "                        <td>&nbsp;Jump to Location (x, y)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>K</strong></td>\n"
#~ "                        <td>&nbsp;Toggle Corner Snap</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>M</strong></td>\n"
#~ "                        <td>&nbsp;Move Geo Item</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>N</strong></td>\n"
#~ "                        <td>&nbsp;Draw a Polygon</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>O</strong></td>\n"
#~ "                        <td>&nbsp;Draw a Circle</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>P</strong></td>\n"
#~ "                        <td>&nbsp;Draw a Path</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>R</strong></td>\n"
#~ "                        <td>&nbsp;Draw Rectangle</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>S</strong></td>\n"
#~ "                        <td>&nbsp;Polygon Substraction Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>T</strong></td>\n"
#~ "                        <td>&nbsp;Add Text Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>U</strong></td>\n"
#~ "                        <td>&nbsp;Polygon Union Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>X</strong></td>\n"
#~ "                        <td>&nbsp;Flip shape on X axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Y</strong></td>\n"
#~ "                        <td>&nbsp;Flip shape on Y axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Shift+X</strong></td>\n"
#~ "                        <td>&nbsp;Skew shape on X axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Shift+Y</strong></td>\n"
#~ "                        <td>&nbsp;Skew shape on Y axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Alt+R</strong></td>\n"
#~ "                        <td>&nbsp;Editor Transformation Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Alt+X</strong></td>\n"
#~ "                        <td>&nbsp;Offset shape on X axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Alt+Y</strong></td>\n"
#~ "                        <td>&nbsp;Offset shape on Y axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Ctrl+M</strong></td>\n"
#~ "                        <td>&nbsp;Measurement Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Ctrl+S</strong></td>\n"
#~ "                        <td>&nbsp;Save Object and Exit Editor</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Ctrl+X</strong></td>\n"
#~ "                        <td>&nbsp;Polygon Cut Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Space</strong></td>\n"
#~ "                        <td>&nbsp;Rotate Geometry</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ENTER</strong></td>\n"
#~ "                        <td>&nbsp;Finish drawing for certain tools</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ESC</strong></td>\n"
#~ "                        <td>&nbsp;Abort and return to Select</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Del</strong></td>\n"
#~ "                        <td>&nbsp;Delete Shape</td>\n"
#~ "                    </tr>\n"
#~ "                </tbody>\n"
#~ "            </table>\n"
#~ "            <br>\n"
#~ "            <br>\n"
#~ "            <strong><span style=\"color:#ff0000\">EXCELLON EDITOR</span></"
#~ "strong><br>\n"
#~ "            <table border=\"0\" cellpadding=\"0\" cellspacing=\"0\" style="
#~ "\"width:283px\">\n"
#~ "                <tbody>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\" width=\"89\"><strong>A</"
#~ "strong></td>\n"
#~ "                        <td width=\"194\">&nbsp;Add Drill Array</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>C</strong></td>\n"
#~ "                        <td>&nbsp;Copy Drill(s)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>D</strong></td>\n"
#~ "                        <td>&nbsp;Add Drill</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>J</strong></td>\n"
#~ "                        <td>&nbsp;Jump to Location (x, y)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>M</strong></td>\n"
#~ "                        <td>&nbsp;Move Drill(s)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>R</strong></td>\n"
#~ "                        <td>&nbsp;Resize Drill(s)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>T</strong></td>\n"
#~ "                        <td>&nbsp;Add a new Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Del</strong></td>\n"
#~ "                        <td>&nbsp;Delete Drill(s)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Del</strong></td>\n"
#~ "                        <td>&nbsp;Alternate: Delete Tool(s)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ESC</strong></td>\n"
#~ "                        <td>&nbsp;Abort and return to Select</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Ctrl+S</strong></td>\n"
#~ "                        <td>&nbsp;Save Object and Exit Editor</td>\n"
#~ "                    </tr>\n"
#~ "                </tbody>\n"
#~ "            </table>\n"
#~ "                    "
#~ msgstr ""
#~ "<b>Editor Shortcut list</b><br>\n"
#~ "            <br>\n"
#~ "            <strong><span style=\"color:#0000ff\">GEOMETRY EDITOR</span></"
#~ "strong><br>\n"
#~ "    \n"
#~ "            <table border=\"0\" cellpadding=\"0\" cellspacing=\"0\" style="
#~ "\"width:283px\">\n"
#~ "                <tbody>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\" width=\"89\"><strong>A</"
#~ "strong></td>\n"
#~ "                        <td width=\"194\">&nbsp;Draw an Arc</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>B</strong></td>\n"
#~ "                        <td>&nbsp;Buffer Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>C</strong></td>\n"
#~ "                        <td>&nbsp;Copy Geo Item</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>E</strong></td>\n"
#~ "                        <td>&nbsp;Polygon Intersection Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>I</strong></td>\n"
#~ "                        <td>&nbsp;Paint Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>J</strong></td>\n"
#~ "                        <td>&nbsp;Jump to Location (x, y)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>K</strong></td>\n"
#~ "                        <td>&nbsp;Toggle Corner Snap</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>M</strong></td>\n"
#~ "                        <td>&nbsp;Move Geo Item</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>N</strong></td>\n"
#~ "                        <td>&nbsp;Draw a Polygon</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>O</strong></td>\n"
#~ "                        <td>&nbsp;Draw a Circle</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>P</strong></td>\n"
#~ "                        <td>&nbsp;Draw a Path</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>R</strong></td>\n"
#~ "                        <td>&nbsp;Draw Rectangle</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>S</strong></td>\n"
#~ "                        <td>&nbsp;Polygon Substraction Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>T</strong></td>\n"
#~ "                        <td>&nbsp;Add Text Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>U</strong></td>\n"
#~ "                        <td>&nbsp;Polygon Union Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>X</strong></td>\n"
#~ "                        <td>&nbsp;Flip shape on X axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Y</strong></td>\n"
#~ "                        <td>&nbsp;Flip shape on Y axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Shift+X</strong></td>\n"
#~ "                        <td>&nbsp;Skew shape on X axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Shift+Y</strong></td>\n"
#~ "                        <td>&nbsp;Skew shape on Y axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Alt+R</strong></td>\n"
#~ "                        <td>&nbsp;Editor Transformation Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Alt+X</strong></td>\n"
#~ "                        <td>&nbsp;Offset shape on X axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Alt+Y</strong></td>\n"
#~ "                        <td>&nbsp;Offset shape on Y axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Ctrl+M</strong></td>\n"
#~ "                        <td>&nbsp;Measurement Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Ctrl+S</strong></td>\n"
#~ "                        <td>&nbsp;Save Object and Exit Editor</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Ctrl+X</strong></td>\n"
#~ "                        <td>&nbsp;Polygon Cut Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Space</strong></td>\n"
#~ "                        <td>&nbsp;Rotate Geometry</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ENTER</strong></td>\n"
#~ "                        <td>&nbsp;Finish drawing for certain tools</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ESC</strong></td>\n"
#~ "                        <td>&nbsp;Abort and return to Select</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Del</strong></td>\n"
#~ "                        <td>&nbsp;Delete Shape</td>\n"
#~ "                    </tr>\n"
#~ "                </tbody>\n"
#~ "            </table>\n"
#~ "            <br>\n"
#~ "            <br>\n"
#~ "            <strong><span style=\"color:#ff0000\">EXCELLON EDITOR</span></"
#~ "strong><br>\n"
#~ "            <table border=\"0\" cellpadding=\"0\" cellspacing=\"0\" style="
#~ "\"width:283px\">\n"
#~ "                <tbody>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\" width=\"89\"><strong>A</"
#~ "strong></td>\n"
#~ "                        <td width=\"194\">&nbsp;Add Drill Array</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>C</strong></td>\n"
#~ "                        <td>&nbsp;Copy Drill(s)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>D</strong></td>\n"
#~ "                        <td>&nbsp;Add Drill</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>J</strong></td>\n"
#~ "                        <td>&nbsp;Jump to Location (x, y)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>M</strong></td>\n"
#~ "                        <td>&nbsp;Move Drill(s)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>R</strong></td>\n"
#~ "                        <td>&nbsp;Resize Drill(s)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>T</strong></td>\n"
#~ "                        <td>&nbsp;Add a new Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Del</strong></td>\n"
#~ "                        <td>&nbsp;Delete Drill(s)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Del</strong></td>\n"
#~ "                        <td>&nbsp;Alternate: Delete Tool(s)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ESC</strong></td>\n"
#~ "                        <td>&nbsp;Abort and return to Select</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Ctrl+S</strong></td>\n"
#~ "                        <td>&nbsp;Save Object and Exit Editor</td>\n"
#~ "                    </tr>\n"
#~ "                </tbody>\n"
#~ "            </table>\n"
#~ "                    "

#~ msgid "[ERROR_NOTCL]Could not load defaults file."
#~ msgstr "[ERROR_NOTCL]Could not load defaults file."

#~ msgid ""
#~ "[ERROR_NOTCL] The aperture scale factor value is missing or wrong format."
#~ msgstr ""
#~ "[ERROR_NOTCL] The aperture scale factor value is missing or wrong format."

#~ msgid "[WARNING_NOTCL]Export Machine Code cancelled ..."
#~ msgstr "[WARNING_NOTCL]Export Machine Code cancelled ..."

#~ msgid "[success] GUI settings deleted ..."
#~ msgstr "[success] GUI settings deleted ..."

#~ msgid "Buffer Factor:"
#~ msgstr "Buffer Factor:"

#~ msgid "<b>Generate new Gerber Object:</b>"
#~ msgstr "<b>Generate new Gerber Object:</b>"

#~ msgid "Will generate a new Gerber object from the changed apertures."
#~ msgstr "Will generate a new Gerber object from the changed apertures."

#~ msgid ""
#~ "Will generate a new Gerber object from the changed apertures.\n"
#~ "This new object can then be isolated etc."
#~ msgstr ""
#~ "Will generate a new Gerber object from the changed apertures.\n"
#~ "This new object can then be isolated etc."

#~ msgid "[success]Offset on the %s axis done ..."
#~ msgstr "[success]Offset on the %s axis done ..."

#~ msgid ""
#~ "How much (fraction) of the tool width to overlap each tool pass.\n"
#~ "Example:\n"
#~ "A value here of 0.25 means 25\\% from the tool diameter found above.\n"
#~ "\n"
#~ "Adjust the value starting with lower values\n"
#~ "and increasing it if areas that should be painted are still \n"
#~ "not painted.\n"
#~ "Lower values = faster processing, faster execution on PCB.\n"
#~ "Higher values = slow processing and slow execution on CNC\n"
#~ "due of too many paths."
#~ msgstr ""
#~ "How much (fraction) of the tool width to overlap each tool pass.\n"
#~ "Example:\n"
#~ "A value here of 0.25 means 25\\% from the tool diameter found above.\n"
#~ "\n"
#~ "Adjust the value starting with lower values\n"
#~ "and increasing it if areas that should be painted are still \n"
#~ "not painted.\n"
#~ "Lower values = faster processing, faster execution on PCB.\n"
#~ "Higher values = slow processing and slow execution on CNC\n"
#~ "due of too many paths."

#~| msgid "z_toolchange = Z coord for Toolchange"
#~ msgid "z_move = Z coord for Toolchange"
#~ msgstr "z_move = Z coord for Toolchange"

#~ msgid "%s/Project_%s"
#~ msgstr "%s/Project_%s"

#~ msgid "tool_tab"
#~ msgstr "tool_tab"