| 12345678910111213141516171819202122232425262728293031323334353637383940414243444546474849505152535455565758596061626364656667686970717273747576777879 |
- from FlatCAMPostProc import *
- # This post processor is configured to output code that
- # is compatible with almost any version of Grbl.
- class grbl_laser(FlatCAMPostProc):
- coordinate_format = "%.*f"
- feedrate_format = '%.*f'
- def start_code(self, p):
- units = ' ' + str(p['units']).lower()
- gcode = ''
- gcode += '(Feedrate: ' + str(p['feedrate']) + units + '/min' + ')\n'
- gcode += '(Feedrate rapids ' + str(p['feedrate_rapid']) + units + '/min' + ')\n' + '\n'
- gcode += '(Steps per circle: ' + str(p['steps_per_circle']) + ')\n'
- if str(p['options']['type']) == 'Excellon' or str(p['options']['type']) == 'Excellon Geometry':
- gcode += '(Postprocessor Excellon: ' + str(p['pp_excellon_name']) + ')\n'
- else:
- gcode += '(Postprocessor Geometry: ' + str(p['pp_geometry_name']) + ')\n'
- gcode += ('G20' if p.units.upper() == 'IN' else 'G21') + "\n"
- gcode += 'G90\n'
- gcode += 'G94\n'
- gcode += 'G17\n'
- return gcode
- def startz_code(self, p):
- return ''
- def lift_code(self, p):
- return 'M05'
- def down_code(self, p):
- if p.spindlespeed:
- return 'M03 S%d' % p.spindlespeed
- else:
- return 'M03'
- def toolchange_code(self, p):
- return ''
- def up_to_zero_code(self, p):
- return 'M05'
- def position_code(self, p):
- return ('X' + self.coordinate_format + ' Y' + self.coordinate_format) % \
- (p.coords_decimals, p.x, p.coords_decimals, p.y)
- def rapid_code(self, p):
- return ('G00 ' + self.position_code(p)).format(**p)
- def linear_code(self, p):
- return ('G01 ' + self.position_code(p)).format(**p) + \
- ' F' + str(self.feedrate_format %(p.fr_decimals, p.feedrate))
- def end_code(self, p):
- gcode = ('G00 Z' + self.feedrate_format %(p.fr_decimals, p.endz) + "\n")
- gcode += 'G00 X0Y0'
- return gcode
- def feedrate_code(self, p):
- return 'G01 F' + str(self.feedrate_format %(p.fr_decimals, p.feedrate))
- def feedrate_z_code(self, p):
- return 'G01 F' + str(self.feedrate_format %(p.fr_decimals, p.feedrate_z))
- def spindle_code(self, p):
- return ''
- def dwell_code(self, p):
- return ''
- def spindle_stop_code(self,p):
- return 'M05'
|
