FlatCAM/locale/en/LC_MESSAGES/strings.po

# SOME DESCRIPTIVE TITLE.
# Copyright (C) YEAR ORGANIZATION
# FIRST AUTHOR <EMAIL@ADDRESS>, YEAR.
#
msgid ""
msgstr ""
"Project-Id-Version: \n"
"POT-Creation-Date: 2019-10-07 04:06+0300\n"
"PO-Revision-Date: 2019-10-07 04:06+0300\n"
"Last-Translator: \n"
"Language-Team: \n"
"Language: en\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Generated-By: pygettext.py 1.5\n"
"X-Generator: Poedit 2.2.3\n"
"Plural-Forms: nplurals=2; plural=(n != 1);\n"
"X-Poedit-Basepath: ../../..\n"
"X-Poedit-SearchPath-0: .\n"
"X-Poedit-SearchPathExcluded-0: build\n"
"X-Poedit-SearchPathExcluded-1: doc\n"
"X-Poedit-SearchPathExcluded-2: tests\n"

#: FlatCAMApp.py:407
msgid "FlatCAM is initializing ..."
msgstr "FlatCAM is initializing ..."

#: FlatCAMApp.py:1274
msgid "Could not find the Language files. The App strings are missing."
msgstr "Could not find the Language files. The App strings are missing."

#: FlatCAMApp.py:1668
msgid ""
"FlatCAM is initializing ...\n"
"Canvas initialization started."
msgstr ""
"FlatCAM is initializing ...\n"
"Canvas initialization started."

#: FlatCAMApp.py:1684
msgid ""
"FlatCAM is initializing ...\n"
"Canvas initialization started.\n"
"Canvas initialization finished in"
msgstr ""
"FlatCAM is initializing ...\n"
"Canvas initialization started.\n"
"Canvas initialization finished in"

#: FlatCAMApp.py:1892
msgid "Detachable Tabs"
msgstr "Detachable Tabs"

#: FlatCAMApp.py:2385
#| msgid ""
#| "Open Source Software - Type help to get started\n"
#| "\n"
msgid ""
"Type >help< to get started\n"
"\n"
msgstr ""
"Type >help< to get started\n"
"\n"

#: FlatCAMApp.py:2599 FlatCAMApp.py:8542
msgid "New Project - Not saved"
msgstr "New Project - Not saved"

#: FlatCAMApp.py:2673 FlatCAMApp.py:8600 FlatCAMApp.py:8636 FlatCAMApp.py:8676
#: FlatCAMApp.py:9430 FlatCAMApp.py:10649 FlatCAMApp.py:10702
msgid ""
"Canvas initialization started.\n"
"Canvas initialization finished in"
msgstr ""
"Canvas initialization started.\n"
"Canvas initialization finished in"

#: FlatCAMApp.py:2675
msgid "Executing Tcl Script ..."
msgstr "Executing Tcl Script ..."

#: FlatCAMApp.py:2728 ObjectCollection.py:80 flatcamTools/ToolImage.py:220
#: flatcamTools/ToolPcbWizard.py:301 flatcamTools/ToolPcbWizard.py:324
msgid "Open cancelled."
msgstr "Open cancelled."

#: FlatCAMApp.py:2744
msgid "Open Config file failed."
msgstr "Open Config file failed."

#: FlatCAMApp.py:2759
msgid "Open Script file failed."
msgstr "Open Script file failed."

#: FlatCAMApp.py:2785
msgid "Open Excellon file failed."
msgstr "Open Excellon file failed."

#: FlatCAMApp.py:2798
msgid "Open GCode file failed."
msgstr "Open GCode file failed."

#: FlatCAMApp.py:2811
msgid "Open Gerber file failed."
msgstr "Open Gerber file failed."

#: FlatCAMApp.py:3131
msgid "Select a Geometry, Gerber or Excellon Object to edit."
msgstr "Select a Geometry, Gerber or Excellon Object to edit."

#: FlatCAMApp.py:3145
msgid ""
"Simultanoeus editing of tools geometry in a MultiGeo Geometry is not "
"possible.\n"
"Edit only one geometry at a time."
msgstr ""
"Simultanoeus editing of tools geometry in a MultiGeo Geometry is not "
"possible.\n"
"Edit only one geometry at a time."

#: FlatCAMApp.py:3200
msgid "Editor is activated ..."
msgstr "Editor is activated ..."

#: FlatCAMApp.py:3218
msgid "Do you want to save the edited object?"
msgstr "Do you want to save the edited object?"

#: FlatCAMApp.py:3219 flatcamGUI/FlatCAMGUI.py:1895
msgid "Close Editor"
msgstr "Close Editor"

#: FlatCAMApp.py:3222 FlatCAMApp.py:4802 FlatCAMApp.py:7358 FlatCAMApp.py:8449
#: FlatCAMTranslation.py:97 FlatCAMTranslation.py:171
#: flatcamGUI/PreferencesUI.py:889
msgid "Yes"
msgstr "Yes"

#: FlatCAMApp.py:3223 FlatCAMApp.py:4803 FlatCAMApp.py:7359 FlatCAMApp.py:8450
#: FlatCAMTranslation.py:98 FlatCAMTranslation.py:172
#: flatcamGUI/PreferencesUI.py:890 flatcamGUI/PreferencesUI.py:3529
#: flatcamGUI/PreferencesUI.py:3893 flatcamTools/ToolNonCopperClear.py:172
#: flatcamTools/ToolPaint.py:145
msgid "No"
msgstr "No"

#: FlatCAMApp.py:3224 FlatCAMApp.py:4804 FlatCAMApp.py:5670 FlatCAMApp.py:6750
#: FlatCAMApp.py:8451
msgid "Cancel"
msgstr "Cancel"

#: FlatCAMApp.py:3252
msgid "Object empty after edit."
msgstr "Object empty after edit."

#: FlatCAMApp.py:3301 FlatCAMApp.py:3321 FlatCAMApp.py:3336
msgid "Select a Gerber, Geometry or Excellon Object to update."
msgstr "Select a Gerber, Geometry or Excellon Object to update."

#: FlatCAMApp.py:3305
msgid "is updated, returning to App..."
msgstr "is updated, returning to App..."

#: FlatCAMApp.py:3701 FlatCAMApp.py:3755 FlatCAMApp.py:4662
msgid "Could not load defaults file."
msgstr "Could not load defaults file."

#: FlatCAMApp.py:3714 FlatCAMApp.py:3764 FlatCAMApp.py:4672
msgid "Failed to parse defaults file."
msgstr "Failed to parse defaults file."

#: FlatCAMApp.py:3735 FlatCAMApp.py:3739
msgid "Import FlatCAM Preferences"
msgstr "Import FlatCAM Preferences"

#: FlatCAMApp.py:3746
msgid "FlatCAM preferences import cancelled."
msgstr "FlatCAM preferences import cancelled."

#: FlatCAMApp.py:3769
msgid "Imported Defaults from"
msgstr "Imported Defaults from"

#: FlatCAMApp.py:3789 FlatCAMApp.py:3794
msgid "Export FlatCAM Preferences"
msgstr "Export FlatCAM Preferences"

#: FlatCAMApp.py:3802
msgid "FlatCAM preferences export cancelled."
msgstr "FlatCAM preferences export cancelled."

#: FlatCAMApp.py:3811 FlatCAMApp.py:9611 FlatCAMApp.py:9722 FlatCAMApp.py:9847
#: FlatCAMApp.py:9906 FlatCAMApp.py:10023 FlatCAMApp.py:10162
#: FlatCAMObj.py:6273 flatcamEditors/FlatCAMTextEditor.py:210
#: flatcamTools/ToolSolderPaste.py:1454
msgid ""
"Permission denied, saving not possible.\n"
"Most likely another app is holding the file open and not accessible."
msgstr ""
"Permission denied, saving not possible.\n"
"Most likely another app is holding the file open and not accessible."

#: FlatCAMApp.py:3824
msgid "Could not load preferences file."
msgstr "Could not load preferences file."

#: FlatCAMApp.py:3844 FlatCAMApp.py:4719
msgid "Failed to write defaults to file."
msgstr "Failed to write defaults to file."

#: FlatCAMApp.py:3850
msgid "Exported preferences to"
msgstr "Exported preferences to"

#: FlatCAMApp.py:3867
msgid "FlatCAM Preferences Folder opened."
msgstr "FlatCAM Preferences Folder opened."

#: FlatCAMApp.py:3950
msgid "Failed to open recent files file for writing."
msgstr "Failed to open recent files file for writing."

#: FlatCAMApp.py:3961
msgid "Failed to open recent projects file for writing."
msgstr "Failed to open recent projects file for writing."

#: FlatCAMApp.py:4047 flatcamParsers/ParseExcellon.py:868
#: flatcamTools/ToolSolderPaste.py:1240
msgid "An internal error has ocurred. See shell.\n"
msgstr "An internal error has ocurred. See shell.\n"

#: FlatCAMApp.py:4048
#, python-brace-format
msgid ""
"Object ({kind}) failed because: {error} \n"
"\n"
msgstr ""
"Object ({kind}) failed because: {error} \n"
"\n"

#: FlatCAMApp.py:4069
msgid "Converting units to "
msgstr "Converting units to "

#: FlatCAMApp.py:4160
msgid ""
"#\n"
"# CREATE A NEW FLATCAM TCL SCRIPT\n"
"# TCL Tutorial here: https://www.tcl.tk/man/tcl8.5/tutorial/tcltutorial."
"html\n"
"#\n"
"\n"
"# FlatCAM commands list:\n"
"# AddCircle, AddPolygon, AddPolyline, AddRectangle, AlignDrill, "
"AlignDrillGrid, ClearShell, ClearCopper,\n"
"# Cncjob, Cutout, Delete, Drillcncjob, ExportGcode, ExportSVG, Exteriors, "
"GeoCutout, GeoUnion, GetNames,\n"
"# GetSys, ImportSvg, Interiors, Isolate, Follow, JoinExcellon, JoinGeometry, "
"ListSys, MillDrills,\n"
"# MillSlots, Mirror, New, NewGeometry, Offset, OpenExcellon, OpenGCode, "
"OpenGerber, OpenProject,\n"
"# Options, Paint, Panelize, Plot, SaveProject, SaveSys, Scale, SetActive, "
"SetSys, Skew, SubtractPoly,\n"
"# SubtractRectangle, Version, WriteGCode\n"
"#\n"
"\n"
msgstr ""
"#\n"
"# CREATE A NEW FLATCAM TCL SCRIPT\n"
"# TCL Tutorial here: https://www.tcl.tk/man/tcl8.5/tutorial/tcltutorial."
"html\n"
"#\n"
"\n"
"# FlatCAM commands list:\n"
"# AddCircle, AddPolygon, AddPolyline, AddRectangle, AlignDrill, "
"AlignDrillGrid, ClearShell, ClearCopper,\n"
"# Cncjob, Cutout, Delete, Drillcncjob, ExportGcode, ExportSVG, Exteriors, "
"GeoCutout, GeoUnion, GetNames,\n"
"# GetSys, ImportSvg, Interiors, Isolate, Follow, JoinExcellon, JoinGeometry, "
"ListSys, MillDrills,\n"
"# MillSlots, Mirror, New, NewGeometry, Offset, OpenExcellon, OpenGCode, "
"OpenGerber, OpenProject,\n"
"# Options, Paint, Panelize, Plot, SaveProject, SaveSys, Scale, SetActive, "
"SetSys, Skew, SubtractPoly,\n"
"# SubtractRectangle, Version, WriteGCode\n"
"#\n"
"\n"

#: FlatCAMApp.py:4222 FlatCAMApp.py:4225 FlatCAMApp.py:4228 FlatCAMApp.py:4231
#: FlatCAMApp.py:4234 FlatCAMApp.py:4237
#, python-brace-format
msgid ""
"[selected] {kind} created/selected: <span style=\"color:{color};\">{name}</"
"span>"
msgstr ""
"[selected] {kind} created/selected: <span style=\"color:{color};\">{name}</"
"span>"

#: FlatCAMApp.py:4252 FlatCAMApp.py:6830 FlatCAMObj.py:255 FlatCAMObj.py:270
#: FlatCAMObj.py:286 FlatCAMObj.py:366 flatcamTools/ToolMove.py:207
msgid "Plotting"
msgstr "Plotting"

#: FlatCAMApp.py:4346 flatcamGUI/FlatCAMGUI.py:442
msgid "About FlatCAM"
msgstr "About FlatCAM"

#: FlatCAMApp.py:4375
msgid "2D Computer-Aided Printed Circuit Board Manufacturing"
msgstr "2D Computer-Aided Printed Circuit Board Manufacturing"

#: FlatCAMApp.py:4376
msgid "Development"
msgstr "Development"

#: FlatCAMApp.py:4377
msgid "DOWNLOAD"
msgstr "DOWNLOAD"

#: FlatCAMApp.py:4378
msgid "Issue tracker"
msgstr "Issue tracker"

#: FlatCAMApp.py:4382
msgid "Close"
msgstr "Close"

#: FlatCAMApp.py:4397
#| msgid ""
#| "(c) Copyright 2014 Juan Pablo Caram.\n"
#| "\n"
#| "Licensed under the MIT license:\n"
#| "http://www.opensource.org/licenses/mit-license.php\n"
#| "\n"
#| "Permission is hereby granted, free of charge, to any person obtaining a "
#| "copy\n"
#| "of this software and associated documentation files (the \"Software\"), "
#| "to deal\n"
#| "in the Software without restriction, including without limitation the "
#| "rights\n"
#| "to use, copy, modify, merge, publish, distribute, sublicense, and/or "
#| "sell\n"
#| "copies of the Software, and to permit persons to whom the Software is\n"
#| " furnished to do so, subject to the following conditions:\n"
#| "\n"
#| "The above copyright notice and this permission notice shall be included "
#| "in\n"
#| "all copies or substantial portions of the Software.\n"
#| "\n"
#| "THE SOFTWARE IS PROVIDED \"AS IS\", WITHOUT WARRANTY OF ANY KIND, EXPRESS "
#| "OR\n"
#| "IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,\n"
#| "FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL "
#| "THE\n"
#| "AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER\n"
#| "LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING "
#| "FROM,\n"
#| "OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS "
#| "IN\n"
#| "THE SOFTWARE."
msgid ""
"\n"
"Licensed under the MIT license:\n"
"http://www.opensource.org/licenses/mit-license.php\n"
"\n"
"Permission is hereby granted, free of charge, to any person obtaining a "
"copy\n"
"of this software and associated documentation files (the \"Software\"), to "
"deal\n"
"in the Software without restriction, including without limitation the "
"rights\n"
"to use, copy, modify, merge, publish, distribute, sublicense, and/or sell\n"
"copies of the Software, and to permit persons to whom the Software is\n"
"furnished to do so, subject to the following conditions:\n"
"\n"
"The above copyright notice and this permission notice shall be included in\n"
"all copies or substantial portions of the Software.\n"
"\n"
"THE SOFTWARE IS PROVIDED \"AS IS\", WITHOUT WARRANTY OF ANY KIND, EXPRESS "
"OR\n"
"IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,\n"
"FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE\n"
"AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER\n"
"LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING "
"FROM,\n"
"OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN\n"
"THE SOFTWARE."
msgstr ""
"\n"
"Licensed under the MIT license:\n"
"http://www.opensource.org/licenses/mit-license.php\n"
"\n"
"Permission is hereby granted, free of charge, to any person obtaining a "
"copy\n"
"of this software and associated documentation files (the \"Software\"), to "
"deal\n"
"in the Software without restriction, including without limitation the "
"rights\n"
"to use, copy, modify, merge, publish, distribute, sublicense, and/or sell\n"
"copies of the Software, and to permit persons to whom the Software is\n"
"furnished to do so, subject to the following conditions:\n"
"\n"
"The above copyright notice and this permission notice shall be included in\n"
"all copies or substantial portions of the Software.\n"
"\n"
"THE SOFTWARE IS PROVIDED \"AS IS\", WITHOUT WARRANTY OF ANY KIND, EXPRESS "
"OR\n"
"IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,\n"
"FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE\n"
"AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER\n"
"LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING "
"FROM,\n"
"OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN\n"
"THE SOFTWARE."

#: FlatCAMApp.py:4423
msgid ""
"Some of the icons used are from the following sources: <BR><div>Icons made "
"by <a href=\"https://www.flaticon.com/authors/freepik\" title=\"Freepik"
"\">Freepik</a> from <a href=\"https://www.flaticon.com/\"             title="
"\"Flaticon\">www.flaticon.com</a></div><br>Icons by <a target=\"_blank\" "
"href=\"https://icons8.com\">Icons8</a>"
msgstr ""
"Some of the icons used are from the following sources: <BR><div>Icons made "
"by <a href=\"https://www.flaticon.com/authors/freepik\" title=\"Freepik"
"\">Freepik</a> from <a href=\"https://www.flaticon.com/\"             title="
"\"Flaticon\">www.flaticon.com</a></div><br>Icons by <a target=\"_blank\" "
"href=\"https://icons8.com\">Icons8</a>"

#: FlatCAMApp.py:4454
msgid "Splash"
msgstr "Splash"

#: FlatCAMApp.py:4460
msgid "Programmers"
msgstr "Programmers"

#: FlatCAMApp.py:4466
msgid "Translators"
msgstr "Translators"

#: FlatCAMApp.py:4472
msgid "License"
msgstr "License"

#: FlatCAMApp.py:4478
msgid "Attributions"
msgstr "Attributions"

#: FlatCAMApp.py:4499
msgid "Programmer"
msgstr "Programmer"

#: FlatCAMApp.py:4500
msgid "Status"
msgstr "Status"

#: FlatCAMApp.py:4502
msgid "Program Author"
msgstr "Program Author"

#: FlatCAMApp.py:4506
#| msgid "Maintainer >=2019"
msgid "Maintainer >= 2019"
msgstr "Maintainer >= 2019"

#: FlatCAMApp.py:4561
msgid "Language"
msgstr "Language"

#: FlatCAMApp.py:4562
msgid "Translator"
msgstr "Translator"

#: FlatCAMApp.py:4563
msgid "E-mail"
msgstr "E-mail"

#: FlatCAMApp.py:4724 FlatCAMApp.py:7368
msgid "Preferences saved."
msgstr "Preferences saved."

#: FlatCAMApp.py:4752
msgid "Could not load factory defaults file."
msgstr "Could not load factory defaults file."

#: FlatCAMApp.py:4762
msgid "Failed to parse factory defaults file."
msgstr "Failed to parse factory defaults file."

#: FlatCAMApp.py:4777
msgid "Failed to write factory defaults to file."
msgstr "Failed to write factory defaults to file."

#: FlatCAMApp.py:4781
msgid "Factory defaults saved."
msgstr "Factory defaults saved."

#: FlatCAMApp.py:4792 flatcamGUI/FlatCAMGUI.py:3505
msgid "Application is saving the project. Please wait ..."
msgstr "Application is saving the project. Please wait ..."

#: FlatCAMApp.py:4797 FlatCAMTranslation.py:166
msgid ""
"There are files/objects modified in FlatCAM. \n"
"Do you want to Save the project?"
msgstr ""
"There are files/objects modified in FlatCAM. \n"
"Do you want to Save the project?"

#: FlatCAMApp.py:4800 FlatCAMApp.py:8447 FlatCAMTranslation.py:169
msgid "Save changes"
msgstr "Save changes"

#: FlatCAMApp.py:5030
msgid "Selected Excellon file extensions registered with FlatCAM."
msgstr "Selected Excellon file extensions registered with FlatCAM."

#: FlatCAMApp.py:5052
msgid "Selected GCode file extensions registered with FlatCAM."
msgstr "Selected GCode file extensions registered with FlatCAM."

#: FlatCAMApp.py:5074
msgid "Selected Gerber file extensions registered with FlatCAM."
msgstr "Selected Gerber file extensions registered with FlatCAM."

#: FlatCAMApp.py:5235 FlatCAMApp.py:5291 FlatCAMApp.py:5319
msgid "At least two objects are required for join. Objects currently selected"
msgstr "At least two objects are required for join. Objects currently selected"

#: FlatCAMApp.py:5244
msgid ""
"Failed join. The Geometry objects are of different types.\n"
"At least one is MultiGeo type and the other is SingleGeo type. A possibility "
"is to convert from one to another and retry joining \n"
"but in the case of converting from MultiGeo to SingleGeo, informations may "
"be lost and the result may not be what was expected. \n"
"Check the generated GCODE."
msgstr ""
"Failed join. The Geometry objects are of different types.\n"
"At least one is MultiGeo type and the other is SingleGeo type. A possibility "
"is to convert from one to another and retry joining \n"
"but in the case of converting from MultiGeo to SingleGeo, informations may "
"be lost and the result may not be what was expected. \n"
"Check the generated GCODE."

#: FlatCAMApp.py:5286
msgid "Failed. Excellon joining works only on Excellon objects."
msgstr "Failed. Excellon joining works only on Excellon objects."

#: FlatCAMApp.py:5314
msgid "Failed. Gerber joining works only on Gerber objects."
msgstr "Failed. Gerber joining works only on Gerber objects."

#: FlatCAMApp.py:5344 FlatCAMApp.py:5381
msgid "Failed. Select a Geometry Object and try again."
msgstr "Failed. Select a Geometry Object and try again."

#: FlatCAMApp.py:5349 FlatCAMApp.py:5386
msgid "Expected a FlatCAMGeometry, got"
msgstr "Expected a FlatCAMGeometry, got"

#: FlatCAMApp.py:5363
msgid "A Geometry object was converted to MultiGeo type."
msgstr "A Geometry object was converted to MultiGeo type."

#: FlatCAMApp.py:5401
msgid "A Geometry object was converted to SingleGeo type."
msgstr "A Geometry object was converted to SingleGeo type."

#: FlatCAMApp.py:5664
msgid "Toggle Units"
msgstr "Toggle Units"

#: FlatCAMApp.py:5666
msgid "Change project units ..."
msgstr "Change project units ..."

#: FlatCAMApp.py:5667
msgid ""
"Changing the units of the project causes all geometrical properties of all "
"objects to be scaled accordingly.\n"
"Continue?"
msgstr ""
"Changing the units of the project causes all geometrical properties of all "
"objects to be scaled accordingly.\n"
"Continue?"

#: FlatCAMApp.py:5669 FlatCAMApp.py:6673 FlatCAMApp.py:6749 FlatCAMApp.py:8760
#: FlatCAMApp.py:8774 FlatCAMApp.py:9117 FlatCAMApp.py:9128
msgid "Ok"
msgstr "Ok"

#: FlatCAMApp.py:5718
msgid "Converted units to"
msgstr "Converted units to"

#: FlatCAMApp.py:5730
msgid " Units conversion cancelled."
msgstr " Units conversion cancelled."

#: FlatCAMApp.py:6661 flatcamTools/ToolNonCopperClear.py:549
#: flatcamTools/ToolNonCopperClear.py:979 flatcamTools/ToolPaint.py:461
#: flatcamTools/ToolSolderPaste.py:473 flatcamTools/ToolSolderPaste.py:800
msgid "Please enter a tool diameter with non-zero value, in Float format."
msgstr "Please enter a tool diameter with non-zero value, in Float format."

#: FlatCAMApp.py:6666 flatcamTools/ToolNonCopperClear.py:553
#: flatcamTools/ToolPaint.py:465 flatcamTools/ToolSolderPaste.py:477
msgid "Adding Tool cancelled"
msgstr "Adding Tool cancelled"

#: FlatCAMApp.py:6669
msgid ""
"Adding Tool works only when Advanced is checked.\n"
"Go to Preferences -> General - Show Advanced Options."
msgstr ""
"Adding Tool works only when Advanced is checked.\n"
"Go to Preferences -> General - Show Advanced Options."

#: FlatCAMApp.py:6744
msgid "Delete objects"
msgstr "Delete objects"

#: FlatCAMApp.py:6747
msgid ""
"Are you sure you want to permanently delete\n"
"the selected objects?"
msgstr ""
"Are you sure you want to permanently delete\n"
"the selected objects?"

#: FlatCAMApp.py:6778
msgid "Object(s) deleted"
msgstr "Object(s) deleted"

#: FlatCAMApp.py:6782
msgid "Failed. No object(s) selected..."
msgstr "Failed. No object(s) selected..."

#: FlatCAMApp.py:6784
msgid "Save the work in Editor and try again ..."
msgstr "Save the work in Editor and try again ..."

#: FlatCAMApp.py:6814
msgid "Object deleted"
msgstr "Object deleted"

#: FlatCAMApp.py:6841
msgid "Click to set the origin ..."
msgstr "Click to set the origin ..."

#: FlatCAMApp.py:6863
msgid "Setting Origin..."
msgstr "Setting Origin..."

#: FlatCAMApp.py:6875
msgid "Origin set"
msgstr "Origin set"

#: FlatCAMApp.py:6882
msgid "Origin coordinates specified but incomplete."
msgstr "Origin coordinates specified but incomplete."

#: FlatCAMApp.py:6940
msgid "Jump to ..."
msgstr "Jump to ..."

#: FlatCAMApp.py:6941
msgid "Enter the coordinates in format X,Y:"
msgstr "Enter the coordinates in format X,Y:"

#: FlatCAMApp.py:6949
msgid "Wrong coordinates. Enter coordinates in format: X,Y"
msgstr "Wrong coordinates. Enter coordinates in format: X,Y"

#: FlatCAMApp.py:6997 flatcamEditors/FlatCAMExcEditor.py:3487
#: flatcamEditors/FlatCAMExcEditor.py:3495
#: flatcamEditors/FlatCAMGeoEditor.py:3915
#: flatcamEditors/FlatCAMGeoEditor.py:3930
#: flatcamEditors/FlatCAMGrbEditor.py:1068
#: flatcamEditors/FlatCAMGrbEditor.py:1172
#: flatcamEditors/FlatCAMGrbEditor.py:1446
#: flatcamEditors/FlatCAMGrbEditor.py:1704
#: flatcamEditors/FlatCAMGrbEditor.py:4303
#: flatcamEditors/FlatCAMGrbEditor.py:4318 flatcamGUI/FlatCAMGUI.py:2731
#: flatcamGUI/FlatCAMGUI.py:2743
msgid "Done."
msgstr "Done."

#: FlatCAMApp.py:7141 FlatCAMApp.py:7209
msgid "No object is selected. Select an object and try again."
msgstr "No object is selected. Select an object and try again."

#: FlatCAMApp.py:7229
msgid ""
"Aborting. The current task will be gracefully closed as soon as possible..."
msgstr ""
"Aborting. The current task will be gracefully closed as soon as possible..."

#: FlatCAMApp.py:7235
msgid "The current task was gracefully closed on user request..."
msgstr "The current task was gracefully closed on user request..."

#: FlatCAMApp.py:7252 flatcamGUI/GUIElements.py:1546
msgid "Preferences"
msgstr "Preferences"

#: FlatCAMApp.py:7319
msgid "Preferences edited but not saved."
msgstr "Preferences edited but not saved."

#: FlatCAMApp.py:7353
msgid ""
"One or more values are changed.\n"
"Do you want to save the Preferences?"
msgstr ""
"One or more values are changed.\n"
"Do you want to save the Preferences?"

#: FlatCAMApp.py:7355 flatcamGUI/FlatCAMGUI.py:207
#: flatcamGUI/FlatCAMGUI.py:1068
msgid "Save Preferences"
msgstr "Save Preferences"

#: FlatCAMApp.py:7384
msgid "No object selected to Flip on Y axis."
msgstr "No object selected to Flip on Y axis."

#: FlatCAMApp.py:7410
msgid "Flip on Y axis done."
msgstr "Flip on Y axis done."

#: FlatCAMApp.py:7413 FlatCAMApp.py:7456
#: flatcamEditors/FlatCAMGrbEditor.py:5759
msgid "Flip action was not executed."
msgstr "Flip action was not executed."

#: FlatCAMApp.py:7427
msgid "No object selected to Flip on X axis."
msgstr "No object selected to Flip on X axis."

#: FlatCAMApp.py:7453
msgid "Flip on X axis done."
msgstr "Flip on X axis done."

#: FlatCAMApp.py:7470
msgid "No object selected to Rotate."
msgstr "No object selected to Rotate."

#: FlatCAMApp.py:7473 FlatCAMApp.py:7521 FlatCAMApp.py:7554
msgid "Transform"
msgstr "Transform"

#: FlatCAMApp.py:7473 FlatCAMApp.py:7521 FlatCAMApp.py:7554
msgid "Enter the Angle value:"
msgstr "Enter the Angle value:"

#: FlatCAMApp.py:7504
msgid "Rotation done."
msgstr "Rotation done."

#: FlatCAMApp.py:7507
msgid "Rotation movement was not executed."
msgstr "Rotation movement was not executed."

#: FlatCAMApp.py:7519
msgid "No object selected to Skew/Shear on X axis."
msgstr "No object selected to Skew/Shear on X axis."

#: FlatCAMApp.py:7541
msgid "Skew on X axis done."
msgstr "Skew on X axis done."

#: FlatCAMApp.py:7552
msgid "No object selected to Skew/Shear on Y axis."
msgstr "No object selected to Skew/Shear on Y axis."

#: FlatCAMApp.py:7574
msgid "Skew on Y axis done."
msgstr "Skew on Y axis done."

#: FlatCAMApp.py:7743 flatcamGUI/FlatCAMGUI.py:1398
msgid "Grid On/Off"
msgstr "Grid On/Off"

#: FlatCAMApp.py:7756 flatcamEditors/FlatCAMGeoEditor.py:942
#: flatcamEditors/FlatCAMGrbEditor.py:2497
#: flatcamEditors/FlatCAMGrbEditor.py:5269 flatcamGUI/ObjectUI.py:1114
#: flatcamTools/ToolDblSided.py:161 flatcamTools/ToolDblSided.py:208
#: flatcamTools/ToolNonCopperClear.py:246 flatcamTools/ToolPaint.py:172
#: flatcamTools/ToolSolderPaste.py:115 flatcamTools/ToolSolderPaste.py:502
#: flatcamTools/ToolTransform.py:308
msgid "Add"
msgstr "Add"

#: FlatCAMApp.py:7757 FlatCAMObj.py:3757
#: flatcamEditors/FlatCAMGrbEditor.py:2502
#: flatcamEditors/FlatCAMGrbEditor.py:2645 flatcamGUI/FlatCAMGUI.py:586
#: flatcamGUI/FlatCAMGUI.py:821 flatcamGUI/FlatCAMGUI.py:1797
#: flatcamGUI/FlatCAMGUI.py:1893 flatcamGUI/FlatCAMGUI.py:2219
#: flatcamGUI/ObjectUI.py:1130 flatcamTools/ToolNonCopperClear.py:258
#: flatcamTools/ToolPaint.py:184 flatcamTools/ToolSolderPaste.py:121
#: flatcamTools/ToolSolderPaste.py:504
msgid "Delete"
msgstr "Delete"

#: FlatCAMApp.py:7770
msgid "New Grid ..."
msgstr "New Grid ..."

#: FlatCAMApp.py:7771
msgid "Enter a Grid Value:"
msgstr "Enter a Grid Value:"

#: FlatCAMApp.py:7779 FlatCAMApp.py:7806
msgid "Please enter a grid value with non-zero value, in Float format."
msgstr "Please enter a grid value with non-zero value, in Float format."

#: FlatCAMApp.py:7785
msgid "New Grid added"
msgstr "New Grid added"

#: FlatCAMApp.py:7788
msgid "Grid already exists"
msgstr "Grid already exists"

#: FlatCAMApp.py:7791
msgid "Adding New Grid cancelled"
msgstr "Adding New Grid cancelled"

#: FlatCAMApp.py:7813
msgid " Grid Value does not exist"
msgstr " Grid Value does not exist"

#: FlatCAMApp.py:7816
msgid "Grid Value deleted"
msgstr "Grid Value deleted"

#: FlatCAMApp.py:7819
msgid "Delete Grid value cancelled"
msgstr "Delete Grid value cancelled"

#: FlatCAMApp.py:7825
msgid "Key Shortcut List"
msgstr "Key Shortcut List"

#: FlatCAMApp.py:7859
msgid " No object selected to copy it's name"
msgstr " No object selected to copy it's name"

#: FlatCAMApp.py:7863
msgid "Name copied on clipboard ..."
msgstr "Name copied on clipboard ..."

#: FlatCAMApp.py:8069 flatcamEditors/FlatCAMGrbEditor.py:4235
msgid "Coordinates copied to clipboard."
msgstr "Coordinates copied to clipboard."

#: FlatCAMApp.py:8203 FlatCAMApp.py:8207 FlatCAMApp.py:8211 FlatCAMApp.py:8215
#: FlatCAMApp.py:8231 FlatCAMApp.py:8235 FlatCAMApp.py:8239 FlatCAMApp.py:8243
#: FlatCAMApp.py:8283 FlatCAMApp.py:8286 FlatCAMApp.py:8289 FlatCAMApp.py:8292
#: ObjectCollection.py:764 ObjectCollection.py:767 ObjectCollection.py:770
#: ObjectCollection.py:773 ObjectCollection.py:776 ObjectCollection.py:779
#, python-brace-format
msgid "[selected]<span style=\"color:{color};\">{name}</span> selected"
msgstr "[selected]<span style=\"color:{color};\">{name}</span> selected"

#: FlatCAMApp.py:8444
msgid ""
"There are files/objects opened in FlatCAM.\n"
"Creating a New project will delete them.\n"
"Do you want to Save the project?"
msgstr ""
"There are files/objects opened in FlatCAM.\n"
"Creating a New project will delete them.\n"
"Do you want to Save the project?"

#: FlatCAMApp.py:8466
msgid "New Project created"
msgstr "New Project created"

#: FlatCAMApp.py:8591 FlatCAMApp.py:8595 flatcamGUI/FlatCAMGUI.py:671
#: flatcamGUI/FlatCAMGUI.py:2084
msgid "Open Gerber"
msgstr "Open Gerber"

#: FlatCAMApp.py:8602
msgid "Opening Gerber file."
msgstr "Opening Gerber file."

#: FlatCAMApp.py:8608
msgid "Open Gerber cancelled."
msgstr "Open Gerber cancelled."

#: FlatCAMApp.py:8628 FlatCAMApp.py:8632 flatcamGUI/FlatCAMGUI.py:672
#: flatcamGUI/FlatCAMGUI.py:2085
msgid "Open Excellon"
msgstr "Open Excellon"

#: FlatCAMApp.py:8638
msgid "Opening Excellon file."
msgstr "Opening Excellon file."

#: FlatCAMApp.py:8644
msgid " Open Excellon cancelled."
msgstr " Open Excellon cancelled."

#: FlatCAMApp.py:8667 FlatCAMApp.py:8671
msgid "Open G-Code"
msgstr "Open G-Code"

#: FlatCAMApp.py:8678
msgid "Opening G-Code file."
msgstr "Opening G-Code file."

#: FlatCAMApp.py:8684
msgid "Open G-Code cancelled."
msgstr "Open G-Code cancelled."

#: FlatCAMApp.py:8701 FlatCAMApp.py:8704 flatcamGUI/FlatCAMGUI.py:1404
msgid "Open Project"
msgstr "Open Project"

#: FlatCAMApp.py:8713
msgid "Open Project cancelled."
msgstr "Open Project cancelled."

#: FlatCAMApp.py:8732 FlatCAMApp.py:8735
msgid "Open Configuration File"
msgstr "Open Configuration File"

#: FlatCAMApp.py:8740
msgid "Open Config cancelled."
msgstr "Open Config cancelled."

#: FlatCAMApp.py:8756 FlatCAMApp.py:9113 FlatCAMApp.py:11773
#: FlatCAMApp.py:11794 FlatCAMApp.py:11816 FlatCAMApp.py:11839
msgid "No object selected."
msgstr "No object selected."

#: FlatCAMApp.py:8757 FlatCAMApp.py:9114
msgid "Please Select a Geometry object to export"
msgstr "Please Select a Geometry object to export"

#: FlatCAMApp.py:8771
msgid "Only Geometry, Gerber and CNCJob objects can be used."
msgstr "Only Geometry, Gerber and CNCJob objects can be used."

#: FlatCAMApp.py:8784 FlatCAMApp.py:8788
msgid "Export SVG"
msgstr "Export SVG"

#: FlatCAMApp.py:8794
msgid " Export SVG cancelled."
msgstr " Export SVG cancelled."

#: FlatCAMApp.py:8814
msgid "Data must be a 3D array with last dimension 3 or 4"
msgstr "Data must be a 3D array with last dimension 3 or 4"

#: FlatCAMApp.py:8820 FlatCAMApp.py:8824
msgid "Export PNG Image"
msgstr "Export PNG Image"

#: FlatCAMApp.py:8829
msgid "Export PNG cancelled."
msgstr "Export PNG cancelled."

#: FlatCAMApp.py:8849
msgid "No object selected. Please select an Gerber object to export."
msgstr "No object selected. Please select an Gerber object to export."

#: FlatCAMApp.py:8855 FlatCAMApp.py:9075
msgid "Failed. Only Gerber objects can be saved as Gerber files..."
msgstr "Failed. Only Gerber objects can be saved as Gerber files..."

#: FlatCAMApp.py:8867
msgid "Save Gerber source file"
msgstr "Save Gerber source file"

#: FlatCAMApp.py:8873
msgid "Save Gerber source file cancelled."
msgstr "Save Gerber source file cancelled."

#: FlatCAMApp.py:8893
#| msgid "No object selected. Please select an Gerber object to export."
msgid "No object selected. Please select an Script object to export."
msgstr "No object selected. Please select an Script object to export."

#: FlatCAMApp.py:8899
#| msgid "Failed. Only Gerber objects can be saved as Gerber files..."
msgid "Failed. Only Script objects can be saved as TCL Script files..."
msgstr "Failed. Only Script objects can be saved as TCL Script files..."

#: FlatCAMApp.py:8911
#| msgid "Save Gerber source file"
msgid "Save Script source file"
msgstr "Save Script source file"

#: FlatCAMApp.py:8917
#| msgid "Save Gerber source file cancelled."
msgid "Save Script source file cancelled."
msgstr "Save Script source file cancelled."

#: FlatCAMApp.py:8937
#| msgid "No object selected. Please select an Excellon object to export."
msgid "No object selected. Please select an Document object to export."
msgstr "No object selected. Please select an Document object to export."

#: FlatCAMApp.py:8943
#| msgid "Failed. Only Excellon objects can be saved as Excellon files..."
msgid "Failed. Only Document objects can be saved as Document files..."
msgstr "Failed. Only Document objects can be saved as Document files..."

#: FlatCAMApp.py:8955
#| msgid "Save Excellon source file"
msgid "Save Document source file"
msgstr "Save Document source file"

#: FlatCAMApp.py:8961
#| msgid "Save Gerber source file cancelled."
msgid "Save Document source file cancelled."
msgstr "Save Document source file cancelled."

#: FlatCAMApp.py:8981
msgid "No object selected. Please select an Excellon object to export."
msgstr "No object selected. Please select an Excellon object to export."

#: FlatCAMApp.py:8987 FlatCAMApp.py:9031
msgid "Failed. Only Excellon objects can be saved as Excellon files..."
msgstr "Failed. Only Excellon objects can be saved as Excellon files..."

#: FlatCAMApp.py:8995 FlatCAMApp.py:8999
msgid "Save Excellon source file"
msgstr "Save Excellon source file"

#: FlatCAMApp.py:9005
msgid "Saving Excellon source file cancelled."
msgstr "Saving Excellon source file cancelled."

#: FlatCAMApp.py:9025
msgid "No object selected. Please Select an Excellon object to export."
msgstr "No object selected. Please Select an Excellon object to export."

#: FlatCAMApp.py:9039 FlatCAMApp.py:9043
msgid "Export Excellon"
msgstr "Export Excellon"

#: FlatCAMApp.py:9049
msgid "Export Excellon cancelled."
msgstr "Export Excellon cancelled."

#: FlatCAMApp.py:9069
msgid "No object selected. Please Select an Gerber object to export."
msgstr "No object selected. Please Select an Gerber object to export."

#: FlatCAMApp.py:9083 FlatCAMApp.py:9087
msgid "Export Gerber"
msgstr "Export Gerber"

#: FlatCAMApp.py:9093
msgid "Export Gerber cancelled."
msgstr "Export Gerber cancelled."

#: FlatCAMApp.py:9125
msgid "Only Geometry objects can be used."
msgstr "Only Geometry objects can be used."

#: FlatCAMApp.py:9139 FlatCAMApp.py:9143
msgid "Export DXF"
msgstr "Export DXF"

#: FlatCAMApp.py:9150
msgid "Export DXF cancelled."
msgstr "Export DXF cancelled."

#: FlatCAMApp.py:9170 FlatCAMApp.py:9173
msgid "Import SVG"
msgstr "Import SVG"

#: FlatCAMApp.py:9183
msgid "Open SVG cancelled."
msgstr "Open SVG cancelled."

#: FlatCAMApp.py:9202 FlatCAMApp.py:9206
msgid "Import DXF"
msgstr "Import DXF"

#: FlatCAMApp.py:9216
msgid "Open DXF cancelled."
msgstr "Open DXF cancelled."

#: FlatCAMApp.py:9254
msgid "Viewing the source code of the selected object."
msgstr "Viewing the source code of the selected object."

#: FlatCAMApp.py:9255 FlatCAMObj.py:6017
msgid "Loading..."
msgstr "Loading..."

#: FlatCAMApp.py:9262
msgid "Select an Gerber or Excellon file to view it's source file."
msgstr "Select an Gerber or Excellon file to view it's source file."

#: FlatCAMApp.py:9277
msgid "Source Editor"
msgstr "Source Editor"

#: FlatCAMApp.py:9310 FlatCAMApp.py:9317
msgid "There is no selected object for which to see it's source file code."
msgstr "There is no selected object for which to see it's source file code."

#: FlatCAMApp.py:9329
msgid "Failed to load the source code for the selected object"
msgstr "Failed to load the source code for the selected object"

#: FlatCAMApp.py:9343 FlatCAMApp.py:10655 FlatCAMObj.py:6031
#: flatcamTools/ToolSolderPaste.py:1330
msgid "Code Editor"
msgstr "Code Editor"

#: FlatCAMApp.py:9363
msgid "New TCL script file created in Code Editor."
msgstr "New TCL script file created in Code Editor."

#: FlatCAMApp.py:9401 FlatCAMApp.py:9403
msgid "Open TCL script"
msgstr "Open TCL script"

#: FlatCAMApp.py:9408
msgid "Open TCL script cancelled."
msgstr "Open TCL script cancelled."

#: FlatCAMApp.py:9432
msgid "Executing FlatCAMScript file."
msgstr "Executing FlatCAMScript file."

#: FlatCAMApp.py:9439 FlatCAMApp.py:9442
msgid "Run TCL script"
msgstr "Run TCL script"

#: FlatCAMApp.py:9452
msgid "Run TCL script cancelled."
msgstr "Run TCL script cancelled."

#: FlatCAMApp.py:9468
msgid "TCL script file opened in Code Editor and executed."
msgstr "TCL script file opened in Code Editor and executed."

#: FlatCAMApp.py:9519 FlatCAMApp.py:9523
msgid "Save Project As ..."
msgstr "Save Project As ..."

#: FlatCAMApp.py:9520
#, python-brace-format
msgid "{l_save}/Project_{date}"
msgstr "{l_save}/Project_{date}"

#: FlatCAMApp.py:9529
msgid "Save Project cancelled."
msgstr "Save Project cancelled."

#: FlatCAMApp.py:9577
msgid "Exporting SVG"
msgstr "Exporting SVG"

#: FlatCAMApp.py:9619 FlatCAMApp.py:9730 FlatCAMApp.py:9856
msgid "SVG file exported to"
msgstr "SVG file exported to"

#: FlatCAMApp.py:9654 FlatCAMApp.py:9779 flatcamTools/ToolPanelize.py:381
msgid "No object Box. Using instead"
msgstr "No object Box. Using instead"

#: FlatCAMApp.py:9733 FlatCAMApp.py:9859
msgid "Generating Film ... Please wait."
msgstr "Generating Film ... Please wait."

#: FlatCAMApp.py:10031
msgid "Excellon file exported to"
msgstr "Excellon file exported to"

#: FlatCAMApp.py:10040
msgid "Exporting Excellon"
msgstr "Exporting Excellon"

#: FlatCAMApp.py:10046 FlatCAMApp.py:10054
msgid "Could not export Excellon file."
msgstr "Could not export Excellon file."

#: FlatCAMApp.py:10170
msgid "Gerber file exported to"
msgstr "Gerber file exported to"

#: FlatCAMApp.py:10178
msgid "Exporting Gerber"
msgstr "Exporting Gerber"

#: FlatCAMApp.py:10184 FlatCAMApp.py:10192
msgid "Could not export Gerber file."
msgstr "Could not export Gerber file."

#: FlatCAMApp.py:10237
msgid "DXF file exported to"
msgstr "DXF file exported to"

#: FlatCAMApp.py:10243
msgid "Exporting DXF"
msgstr "Exporting DXF"

#: FlatCAMApp.py:10249 FlatCAMApp.py:10257
msgid "Could not export DXF file."
msgstr "Could not export DXF file."

#: FlatCAMApp.py:10279 FlatCAMApp.py:10324 FlatCAMApp.py:10368
msgid ""
"Not supported type is picked as parameter. Only Geometry and Gerber are "
"supported"
msgstr ""
"Not supported type is picked as parameter. Only Geometry and Gerber are "
"supported"

#: FlatCAMApp.py:10289
msgid "Importing SVG"
msgstr "Importing SVG"

#: FlatCAMApp.py:10301 FlatCAMApp.py:10344 FlatCAMApp.py:10389
#: FlatCAMApp.py:10470 FlatCAMApp.py:10537 FlatCAMApp.py:10598
#: FlatCAMApp.py:10636 flatcamTools/ToolPDF.py:220
msgid "Opened"
msgstr "Opened"

#: FlatCAMApp.py:10333
msgid "Importing DXF"
msgstr "Importing DXF"

#: FlatCAMApp.py:10376
msgid "Importing Image"
msgstr "Importing Image"

#: FlatCAMApp.py:10419
msgid "Failed to open file"
msgstr "Failed to open file"

#: FlatCAMApp.py:10424
msgid "Failed to parse file"
msgstr "Failed to parse file"

#: FlatCAMApp.py:10431 FlatCAMApp.py:10505 FlatCAMObj.py:4730
#: flatcamEditors/FlatCAMGrbEditor.py:4047 flatcamTools/ToolPcbWizard.py:437
msgid "An internal error has occurred. See shell.\n"
msgstr "An internal error has occurred. See shell.\n"

#: FlatCAMApp.py:10441
msgid "Object is not Gerber file or empty. Aborting object creation."
msgstr "Object is not Gerber file or empty. Aborting object creation."

#: FlatCAMApp.py:10449
msgid "Opening Gerber"
msgstr "Opening Gerber"

#: FlatCAMApp.py:10460
msgid " Open Gerber failed. Probable not a Gerber file."
msgstr " Open Gerber failed. Probable not a Gerber file."

#: FlatCAMApp.py:10495 flatcamTools/ToolPcbWizard.py:427
msgid "This is not Excellon file."
msgstr "This is not Excellon file."

#: FlatCAMApp.py:10499
msgid "Cannot open file"
msgstr "Cannot open file"

#: FlatCAMApp.py:10519 flatcamTools/ToolPDF.py:270
#: flatcamTools/ToolPcbWizard.py:451
msgid "No geometry found in file"
msgstr "No geometry found in file"

#: FlatCAMApp.py:10522
msgid "Opening Excellon."
msgstr "Opening Excellon."

#: FlatCAMApp.py:10529
msgid "Open Excellon file failed. Probable not an Excellon file."
msgstr "Open Excellon file failed. Probable not an Excellon file."

#: FlatCAMApp.py:10566
msgid "Failed to open"
msgstr "Failed to open"

#: FlatCAMApp.py:10574
msgid "This is not GCODE"
msgstr "This is not GCODE"

#: FlatCAMApp.py:10579
msgid "Opening G-Code."
msgstr "Opening G-Code."

#: FlatCAMApp.py:10588
msgid ""
"Failed to create CNCJob Object. Probable not a GCode file.\n"
" Attempting to create a FlatCAM CNCJob Object from G-Code file failed during "
"processing"
msgstr ""
"Failed to create CNCJob Object. Probable not a GCode file.\n"
" Attempting to create a FlatCAM CNCJob Object from G-Code file failed during "
"processing"

#: FlatCAMApp.py:10612
#| msgid "Open TCL script"
msgid "Opening TCL Script..."
msgstr "Opening TCL Script..."

#: FlatCAMApp.py:10620
msgid "TCL script file opened in Code Editor."
msgstr "TCL script file opened in Code Editor."

#: FlatCAMApp.py:10623
#| msgid "Failed to open file"
msgid "Failed to open TCL Script."
msgstr "Failed to open TCL Script."

#: FlatCAMApp.py:10651
msgid "Opening FlatCAM Config file."
msgstr "Opening FlatCAM Config file."

#: FlatCAMApp.py:10673
msgid "Failed to open config file"
msgstr "Failed to open config file"

#: FlatCAMApp.py:10699
msgid "Loading Project ... Please Wait ..."
msgstr "Loading Project ... Please Wait ..."

#: FlatCAMApp.py:10704
msgid "Opening FlatCAM Project file."
msgstr "Opening FlatCAM Project file."

#: FlatCAMApp.py:10714 FlatCAMApp.py:10732
msgid "Failed to open project file"
msgstr "Failed to open project file"

#: FlatCAMApp.py:10766
msgid "Loading Project ... restoring"
msgstr "Loading Project ... restoring"

#: FlatCAMApp.py:10775
msgid "Project loaded from"
msgstr "Project loaded from"

#: FlatCAMApp.py:10838
msgid "Redrawing all objects"
msgstr "Redrawing all objects"

#: FlatCAMApp.py:10870
msgid "Available commands:\n"
msgstr "Available commands:\n"

#: FlatCAMApp.py:10872
msgid ""
"\n"
"\n"
"Type help <command_name> for usage.\n"
" Example: help open_gerber"
msgstr ""
"\n"
"\n"
"Type help <command_name> for usage.\n"
" Example: help open_gerber"

#: FlatCAMApp.py:11022
msgid "Shows list of commands."
msgstr "Shows list of commands."

#: FlatCAMApp.py:11084
msgid "Failed to load recent item list."
msgstr "Failed to load recent item list."

#: FlatCAMApp.py:11092
msgid "Failed to parse recent item list."
msgstr "Failed to parse recent item list."

#: FlatCAMApp.py:11103
msgid "Failed to load recent projects item list."
msgstr "Failed to load recent projects item list."

#: FlatCAMApp.py:11111
msgid "Failed to parse recent project item list."
msgstr "Failed to parse recent project item list."

#: FlatCAMApp.py:11170 FlatCAMApp.py:11193
msgid "Clear Recent files"
msgstr "Clear Recent files"

#: FlatCAMApp.py:11210 flatcamGUI/FlatCAMGUI.py:1085
msgid "<b>Shortcut Key List</b>"
msgstr "<b>Shortcut Key List</b>"

#: FlatCAMApp.py:11284
msgid "Selected Tab - Choose an Item from Project Tab"
msgstr "Selected Tab - Choose an Item from Project Tab"

#: FlatCAMApp.py:11285
msgid "Details"
msgstr "Details"

#: FlatCAMApp.py:11287
msgid "The normal flow when working in FlatCAM is the following:"
msgstr "The normal flow when working in FlatCAM is the following:"

#: FlatCAMApp.py:11288
msgid ""
"Load/Import a Gerber, Excellon, Gcode, DXF, Raster Image or SVG file into "
"FlatCAM using either the toolbars, key shortcuts or even dragging and "
"dropping the files on the GUI."
msgstr ""
"Load/Import a Gerber, Excellon, Gcode, DXF, Raster Image or SVG file into "
"FlatCAM using either the toolbars, key shortcuts or even dragging and "
"dropping the files on the GUI."

#: FlatCAMApp.py:11291
msgid ""
"You can also load a FlatCAM project by double clicking on the project file, "
"drag and drop of the file into the FLATCAM GUI or through the menu (or "
"toolbar) actions offered within the app."
msgstr ""
"You can also load a FlatCAM project by double clicking on the project file, "
"drag and drop of the file into the FLATCAM GUI or through the menu (or "
"toolbar) actions offered within the app."

#: FlatCAMApp.py:11294
msgid ""
"Once an object is available in the Project Tab, by selecting it and then "
"focusing on SELECTED TAB (more simpler is to double click the object name in "
"the Project Tab, SELECTED TAB will be updated with the object properties "
"according to its kind: Gerber, Excellon, Geometry or CNCJob object."
msgstr ""
"Once an object is available in the Project Tab, by selecting it and then "
"focusing on SELECTED TAB (more simpler is to double click the object name in "
"the Project Tab, SELECTED TAB will be updated with the object properties "
"according to its kind: Gerber, Excellon, Geometry or CNCJob object."

#: FlatCAMApp.py:11298
msgid ""
"If the selection of the object is done on the canvas by single click "
"instead, and the SELECTED TAB is in focus, again the object properties will "
"be displayed into the Selected Tab. Alternatively, double clicking on the "
"object on the canvas will bring the SELECTED TAB and populate it even if it "
"was out of focus."
msgstr ""
"If the selection of the object is done on the canvas by single click "
"instead, and the SELECTED TAB is in focus, again the object properties will "
"be displayed into the Selected Tab. Alternatively, double clicking on the "
"object on the canvas will bring the SELECTED TAB and populate it even if it "
"was out of focus."

#: FlatCAMApp.py:11302
msgid ""
"You can change the parameters in this screen and the flow direction is like "
"this:"
msgstr ""
"You can change the parameters in this screen and the flow direction is like "
"this:"

#: FlatCAMApp.py:11303
msgid ""
"Gerber/Excellon Object --> Change Parameter --> Generate Geometry --> "
"Geometry Object --> Add tools (change param in Selected Tab) --> Generate "
"CNCJob --> CNCJob Object --> Verify GCode (through Edit CNC Code) and/or "
"append/prepend to GCode (again, done in SELECTED TAB) --> Save GCode."
msgstr ""
"Gerber/Excellon Object --> Change Parameter --> Generate Geometry --> "
"Geometry Object --> Add tools (change param in Selected Tab) --> Generate "
"CNCJob --> CNCJob Object --> Verify GCode (through Edit CNC Code) and/or "
"append/prepend to GCode (again, done in SELECTED TAB) --> Save GCode."

#: FlatCAMApp.py:11307
msgid ""
"A list of key shortcuts is available through an menu entry in Help --> "
"Shortcuts List or through its own key shortcut: <b>F3</b>."
msgstr ""
"A list of key shortcuts is available through an menu entry in Help --> "
"Shortcuts List or through its own key shortcut: <b>F3</b>."

#: FlatCAMApp.py:11368
msgid "Failed checking for latest version. Could not connect."
msgstr "Failed checking for latest version. Could not connect."

#: FlatCAMApp.py:11376
msgid "Could not parse information about latest version."
msgstr "Could not parse information about latest version."

#: FlatCAMApp.py:11387
msgid "FlatCAM is up to date!"
msgstr "FlatCAM is up to date!"

#: FlatCAMApp.py:11392
msgid "Newer Version Available"
msgstr "Newer Version Available"

#: FlatCAMApp.py:11393
msgid ""
"There is a newer version of FlatCAM available for download:\n"
"\n"
msgstr ""
"There is a newer version of FlatCAM available for download:\n"
"\n"

#: FlatCAMApp.py:11395
msgid "info"
msgstr "info"

#: FlatCAMApp.py:11474
msgid "All plots disabled."
msgstr "All plots disabled."

#: FlatCAMApp.py:11481
msgid "All non selected plots disabled."
msgstr "All non selected plots disabled."

#: FlatCAMApp.py:11488
msgid "All plots enabled."
msgstr "All plots enabled."

#: FlatCAMApp.py:11495
msgid "Selected plots enabled..."
msgstr "Selected plots enabled..."

#: FlatCAMApp.py:11504
msgid "Selected plots disabled..."
msgstr "Selected plots disabled..."

#: FlatCAMApp.py:11522
msgid "Enabling plots ..."
msgstr "Enabling plots ..."

#: FlatCAMApp.py:11561
msgid "Disabling plots ..."
msgstr "Disabling plots ..."

#: FlatCAMApp.py:11583
msgid "Working ..."
msgstr "Working ..."

#: FlatCAMApp.py:11622
msgid "Saving FlatCAM Project"
msgstr "Saving FlatCAM Project"

#: FlatCAMApp.py:11644 FlatCAMApp.py:11682
msgid "Project saved to"
msgstr "Project saved to"

#: FlatCAMApp.py:11664
msgid "Failed to verify project file"
msgstr "Failed to verify project file"

#: FlatCAMApp.py:11664 FlatCAMApp.py:11673 FlatCAMApp.py:11685
msgid "Retry to save it."
msgstr "Retry to save it."

#: FlatCAMApp.py:11673 FlatCAMApp.py:11685
msgid "Failed to parse saved project file"
msgstr "Failed to parse saved project file"

#: FlatCAMApp.py:11896
msgid "The user requested a graceful exit of the current task."
msgstr "The user requested a graceful exit of the current task."

#: FlatCAMObj.py:241
msgid "Name changed from"
msgstr "Name changed from"

#: FlatCAMObj.py:241
msgid "to"
msgstr "to"

#: FlatCAMObj.py:252
msgid "Offsetting..."
msgstr "Offsetting..."

#: FlatCAMObj.py:267
msgid "Scaling..."
msgstr "Scaling..."

#: FlatCAMObj.py:283
msgid "Skewing..."
msgstr "Skewing..."

#: FlatCAMObj.py:653 FlatCAMObj.py:2469 FlatCAMObj.py:3761
#: flatcamGUI/PreferencesUI.py:939 flatcamGUI/PreferencesUI.py:1974
msgid "Basic"
msgstr "Basic"

#: FlatCAMObj.py:675 FlatCAMObj.py:2481 FlatCAMObj.py:3781
#: flatcamGUI/PreferencesUI.py:940
msgid "Advanced"
msgstr "Advanced"

#: FlatCAMObj.py:891
msgid "Buffering solid geometry"
msgstr "Buffering solid geometry"

#: FlatCAMObj.py:894 camlib.py:985 flatcamGUI/PreferencesUI.py:1443
#: flatcamTools/ToolNonCopperClear.py:1612
#: flatcamTools/ToolNonCopperClear.py:1707
#: flatcamTools/ToolNonCopperClear.py:1719
#: flatcamTools/ToolNonCopperClear.py:1947
#: flatcamTools/ToolNonCopperClear.py:2040
#: flatcamTools/ToolNonCopperClear.py:2052
msgid "Buffering"
msgstr "Buffering"

#: FlatCAMObj.py:900
msgid "Done"
msgstr "Done"

#: FlatCAMObj.py:941 FlatCAMObj.py:957 FlatCAMObj.py:974
msgid "Isolating..."
msgstr "Isolating..."

#: FlatCAMObj.py:1178 FlatCAMObj.py:1306
#: flatcamTools/ToolNonCopperClear.py:1641
#: flatcamTools/ToolNonCopperClear.py:1971
msgid "Isolation geometry could not be generated."
msgstr "Isolation geometry could not be generated."

#: FlatCAMObj.py:1227 FlatCAMObj.py:3444 FlatCAMObj.py:3719 FlatCAMObj.py:3988
msgid "Rough"
msgstr "Rough"

#: FlatCAMObj.py:1252 FlatCAMObj.py:1329
msgid "Isolation geometry created"
msgstr "Isolation geometry created"

#: FlatCAMObj.py:1261 FlatCAMObj.py:1336
msgid "Subtracting Geo"
msgstr "Subtracting Geo"

#: FlatCAMObj.py:1547
msgid "Plotting Apertures"
msgstr "Plotting Apertures"

#: FlatCAMObj.py:2296 flatcamEditors/FlatCAMExcEditor.py:2320
msgid "Total Drills"
msgstr "Total Drills"

#: FlatCAMObj.py:2328 flatcamEditors/FlatCAMExcEditor.py:2352
msgid "Total Slots"
msgstr "Total Slots"

#: FlatCAMObj.py:2535 FlatCAMObj.py:3831 FlatCAMObj.py:4122 FlatCAMObj.py:4313
#: FlatCAMObj.py:4324 FlatCAMObj.py:4442 FlatCAMObj.py:4664 FlatCAMObj.py:4787
#: FlatCAMObj.py:4950 FlatCAMObj.py:5469
#: flatcamEditors/FlatCAMExcEditor.py:2427
#: flatcamEditors/FlatCAMGeoEditor.py:1082
#: flatcamEditors/FlatCAMGeoEditor.py:1119
#: flatcamEditors/FlatCAMGeoEditor.py:1140
#: flatcamEditors/FlatCAMGeoEditor.py:1161
#: flatcamEditors/FlatCAMGeoEditor.py:1198
#: flatcamEditors/FlatCAMGeoEditor.py:1230
#: flatcamEditors/FlatCAMGeoEditor.py:1251
#: flatcamEditors/FlatCAMGrbEditor.py:5418
#: flatcamEditors/FlatCAMGrbEditor.py:5461
#: flatcamEditors/FlatCAMGrbEditor.py:5488
#: flatcamEditors/FlatCAMGrbEditor.py:5515
#: flatcamEditors/FlatCAMGrbEditor.py:5556
#: flatcamEditors/FlatCAMGrbEditor.py:5594
#: flatcamEditors/FlatCAMGrbEditor.py:5620
#: flatcamTools/ToolNonCopperClear.py:928
#: flatcamTools/ToolNonCopperClear.py:939
#: flatcamTools/ToolNonCopperClear.py:949
#: flatcamTools/ToolNonCopperClear.py:967
#: flatcamTools/ToolNonCopperClear.py:1044
#: flatcamTools/ToolNonCopperClear.py:1126
#: flatcamTools/ToolNonCopperClear.py:1420
#: flatcamTools/ToolNonCopperClear.py:1452 flatcamTools/ToolPaint.py:727
#: flatcamTools/ToolPaint.py:802 flatcamTools/ToolPaint.py:950
#: flatcamTools/ToolPaint.py:1004 flatcamTools/ToolPaint.py:1290
#: flatcamTools/ToolPaint.py:1567 flatcamTools/ToolPaint.py:2044
#: flatcamTools/ToolSolderPaste.py:790 flatcamTools/ToolSolderPaste.py:865
msgid "Wrong value format entered, use a number."
msgstr "Wrong value format entered, use a number."

#: FlatCAMObj.py:2789 FlatCAMObj.py:2881 FlatCAMObj.py:3002
msgid "Please select one or more tools from the list and try again."
msgstr "Please select one or more tools from the list and try again."

#: FlatCAMObj.py:2795
msgid "Milling tool for DRILLS is larger than hole size. Cancelled."
msgstr "Milling tool for DRILLS is larger than hole size. Cancelled."

#: FlatCAMObj.py:2810 FlatCAMObj.py:2903 FlatCAMObj.py:3021
msgid "Tool_nr"
msgstr "Tool_nr"

#: FlatCAMObj.py:2810 FlatCAMObj.py:2903 FlatCAMObj.py:3021
#: flatcamEditors/FlatCAMExcEditor.py:1501
#: flatcamEditors/FlatCAMExcEditor.py:2935 flatcamGUI/ObjectUI.py:673
#: flatcamTools/ToolNonCopperClear.py:108 flatcamTools/ToolPaint.py:107
#: flatcamTools/ToolPcbWizard.py:76 flatcamTools/ToolSolderPaste.py:81
msgid "Diameter"
msgstr "Diameter"

#: FlatCAMObj.py:2810 FlatCAMObj.py:2903 FlatCAMObj.py:3021
msgid "Drills_Nr"
msgstr "Drills_Nr"

#: FlatCAMObj.py:2810 FlatCAMObj.py:2903 FlatCAMObj.py:3021
msgid "Slots_Nr"
msgstr "Slots_Nr"

#: FlatCAMObj.py:2890
msgid "Milling tool for SLOTS is larger than hole size. Cancelled."
msgstr "Milling tool for SLOTS is larger than hole size. Cancelled."

#: FlatCAMObj.py:3062 FlatCAMObj.py:5163
msgid ""
"Wrong value format for self.defaults[\"z_pdepth\"] or self.options[\"z_pdepth"
"\"]"
msgstr ""
"Wrong value format for self.defaults[\"z_pdepth\"] or self.options[\"z_pdepth"
"\"]"

#: FlatCAMObj.py:3073 FlatCAMObj.py:5174
msgid ""
"Wrong value format for self.defaults[\"feedrate_probe\"] or self."
"options[\"feedrate_probe\"]"
msgstr ""
"Wrong value format for self.defaults[\"feedrate_probe\"] or self."
"options[\"feedrate_probe\"]"

#: FlatCAMObj.py:3103 FlatCAMObj.py:5049 FlatCAMObj.py:5055 FlatCAMObj.py:5209
msgid "Generating CNC Code"
msgstr "Generating CNC Code"

#: FlatCAMObj.py:3129 camlib.py:2358 camlib.py:3342
msgid ""
"The Toolchange X,Y field in Edit -> Preferences has to be in the format (x, "
"y) \n"
"but now there is only one value, not two. "
msgstr ""
"The Toolchange X,Y field in Edit -> Preferences has to be in the format (x, "
"y) \n"
"but now there is only one value, not two. "

#: FlatCAMObj.py:3444 FlatCAMObj.py:4364 FlatCAMObj.py:4365 FlatCAMObj.py:4374
msgid "Iso"
msgstr "Iso"

#: FlatCAMObj.py:3444
msgid "Finish"
msgstr "Finish"

#: FlatCAMObj.py:3755 flatcamGUI/FlatCAMGUI.py:585 flatcamGUI/FlatCAMGUI.py:819
#: flatcamGUI/FlatCAMGUI.py:1794 flatcamGUI/FlatCAMGUI.py:1892
#: flatcamGUI/FlatCAMGUI.py:2217 flatcamGUI/ObjectUI.py:1122
#: flatcamTools/ToolPanelize.py:483 flatcamTools/ToolPanelize.py:510
#: flatcamTools/ToolPanelize.py:610 flatcamTools/ToolPanelize.py:644
#: flatcamTools/ToolPanelize.py:709
msgid "Copy"
msgstr "Copy"

#: FlatCAMObj.py:3962
msgid "Please enter the desired tool diameter in Float format."
msgstr "Please enter the desired tool diameter in Float format."

#: FlatCAMObj.py:4033
msgid "Tool added in Tool Table."
msgstr "Tool added in Tool Table."

#: FlatCAMObj.py:4037
msgid "Default Tool added. Wrong value format entered."
msgstr "Default Tool added. Wrong value format entered."

#: FlatCAMObj.py:4070 FlatCAMObj.py:4079
msgid "Failed. Select a tool to copy."
msgstr "Failed. Select a tool to copy."

#: FlatCAMObj.py:4107
msgid "Tool was copied in Tool Table."
msgstr "Tool was copied in Tool Table."

#: FlatCAMObj.py:4137
msgid "Tool was edited in Tool Table."
msgstr "Tool was edited in Tool Table."

#: FlatCAMObj.py:4166 FlatCAMObj.py:4175
msgid "Failed. Select a tool to delete."
msgstr "Failed. Select a tool to delete."

#: FlatCAMObj.py:4198
msgid "Tool was deleted in Tool Table."
msgstr "Tool was deleted in Tool Table."

#: FlatCAMObj.py:4644
msgid "This Geometry can't be processed because it is"
msgstr "This Geometry can't be processed because it is"

#: FlatCAMObj.py:4646
msgid "geometry"
msgstr "geometry"

#: FlatCAMObj.py:4689
msgid "Failed. No tool selected in the tool table ..."
msgstr "Failed. No tool selected in the tool table ..."

#: FlatCAMObj.py:4792 FlatCAMObj.py:4956
msgid ""
"Tool Offset is selected in Tool Table but no value is provided.\n"
"Add a Tool Offset or change the Offset Type."
msgstr ""
"Tool Offset is selected in Tool Table but no value is provided.\n"
"Add a Tool Offset or change the Offset Type."

#: FlatCAMObj.py:4857 FlatCAMObj.py:5016
msgid "G-Code parsing in progress..."
msgstr "G-Code parsing in progress..."

#: FlatCAMObj.py:4859 FlatCAMObj.py:5018
msgid "G-Code parsing finished..."
msgstr "G-Code parsing finished..."

#: FlatCAMObj.py:4867
msgid "Finished G-Code processing"
msgstr "Finished G-Code processing"

#: FlatCAMObj.py:4869 FlatCAMObj.py:5030
msgid "G-Code processing failed with error"
msgstr "G-Code processing failed with error"

#: FlatCAMObj.py:4917 flatcamTools/ToolSolderPaste.py:1213
msgid "Cancelled. Empty file, it has no geometry"
msgstr "Cancelled. Empty file, it has no geometry"

#: FlatCAMObj.py:5028 FlatCAMObj.py:5202
msgid "Finished G-Code processing..."
msgstr "Finished G-Code processing..."

#: FlatCAMObj.py:5052 FlatCAMObj.py:5058 FlatCAMObj.py:5212
msgid "CNCjob created"
msgstr "CNCjob created"

#: FlatCAMObj.py:5244 FlatCAMObj.py:5254 flatcamParsers/ParseGerber.py:1613
#: flatcamParsers/ParseGerber.py:1623
msgid "Scale factor has to be a number: integer or float."
msgstr "Scale factor has to be a number: integer or float."

#: FlatCAMObj.py:5328
msgid "Geometry Scale done."
msgstr "Geometry Scale done."

#: FlatCAMObj.py:5345 flatcamParsers/ParseGerber.py:1717
msgid ""
"An (x,y) pair of values are needed. Probable you entered only one value in "
"the Offset field."
msgstr ""
"An (x,y) pair of values are needed. Probable you entered only one value in "
"the Offset field."

#: FlatCAMObj.py:5399
msgid "Geometry Offset done."
msgstr "Geometry Offset done."

#: FlatCAMObj.py:5428
msgid ""
"The Toolchange X,Y field in Edit -> Preferences has to be in the format (x, "
"y)\n"
"but now there is only one value, not two."
msgstr ""
"The Toolchange X,Y field in Edit -> Preferences has to be in the format (x, "
"y)\n"
"but now there is only one value, not two."

#: FlatCAMObj.py:5912 FlatCAMObj.py:6535 FlatCAMObj.py:6719
msgid "<span style=\"color:green;\"><b>Basic</b></span>"
msgstr "<span style=\"color:green;\"><b>Basic</b></span>"

#: FlatCAMObj.py:5918 FlatCAMObj.py:6539 FlatCAMObj.py:6723
msgid "<span style=\"color:red;\"><b>Advanced</b></span>"
msgstr "<span style=\"color:red;\"><b>Advanced</b></span>"

#: FlatCAMObj.py:5961
msgid "Plotting..."
msgstr "Plotting..."

#: FlatCAMObj.py:5985 FlatCAMObj.py:5990 flatcamTools/ToolSolderPaste.py:1419
msgid "Export Machine Code ..."
msgstr "Export Machine Code ..."

#: FlatCAMObj.py:5996 flatcamTools/ToolSolderPaste.py:1423
msgid "Export Machine Code cancelled ..."
msgstr "Export Machine Code cancelled ..."

#: FlatCAMObj.py:6014
msgid "Machine Code file saved to"
msgstr "Machine Code file saved to"

#: FlatCAMObj.py:6069
msgid "Loaded Machine Code into Code Editor"
msgstr "Loaded Machine Code into Code Editor"

#: FlatCAMObj.py:6184
msgid "This CNCJob object can't be processed because it is a"
msgstr "This CNCJob object can't be processed because it is a"

#: FlatCAMObj.py:6186
msgid "CNCJob object"
msgstr "CNCJob object"

#: FlatCAMObj.py:6238
msgid "G-code does not have a units code: either G20 or G21"
msgstr "G-code does not have a units code: either G20 or G21"

#: FlatCAMObj.py:6250
msgid "Cancelled. The Toolchange Custom code is enabled but it's empty."
msgstr "Cancelled. The Toolchange Custom code is enabled but it's empty."

#: FlatCAMObj.py:6256
msgid "Toolchange G-code was replaced by a custom code."
msgstr "Toolchange G-code was replaced by a custom code."

#: FlatCAMObj.py:6269 flatcamEditors/FlatCAMTextEditor.py:206
#: flatcamTools/ToolSolderPaste.py:1450
msgid "No such file or directory"
msgstr "No such file or directory"

#: FlatCAMObj.py:6283 flatcamEditors/FlatCAMTextEditor.py:218
msgid "Saved to"
msgstr "Saved to"

#: FlatCAMObj.py:6293 FlatCAMObj.py:6303
msgid ""
"The used postprocessor file has to have in it's name: 'toolchange_custom'"
msgstr ""
"The used postprocessor file has to have in it's name: 'toolchange_custom'"

#: FlatCAMObj.py:6307
msgid "There is no postprocessor file."
msgstr "There is no postprocessor file."

#: FlatCAMObj.py:6584
msgid "Script Editor"
msgstr "Script Editor"

#: FlatCAMObj.py:6820
#| msgid "Geometry Editor"
msgid "Document Editor"
msgstr "Document Editor"

#: FlatCAMProcess.py:172
msgid "processes running."
msgstr "processes running."

#: FlatCAMTranslation.py:92
msgid "The application will restart."
msgstr "The application will restart."

#: FlatCAMTranslation.py:94
msgid "Are you sure do you want to change the current language to"
msgstr "Are you sure do you want to change the current language to"

#: FlatCAMTranslation.py:95
msgid "Apply Language ..."
msgstr "Apply Language ..."

#: ObjectCollection.py:440
#, python-brace-format
msgid "Object renamed from <b>{old}</b> to <b>{new}</b>"
msgstr "Object renamed from <b>{old}</b> to <b>{new}</b>"

#: ObjectCollection.py:810
msgid "Cause of error"
msgstr "Cause of error"

#: camlib.py:596
msgid "self.solid_geometry is neither BaseGeometry or list."
msgstr "self.solid_geometry is neither BaseGeometry or list."

#: camlib.py:975
msgid "Pass"
msgstr "Pass"

#: camlib.py:995
msgid "Get Exteriors"
msgstr "Get Exteriors"

#: camlib.py:998
msgid "Get Interiors"
msgstr "Get Interiors"

#: camlib.py:1920
msgid "Object was mirrored"
msgstr "Object was mirrored"

#: camlib.py:1923
msgid "Failed to mirror. No object selected"
msgstr "Failed to mirror. No object selected"

#: camlib.py:1992
msgid "Object was rotated"
msgstr "Object was rotated"

#: camlib.py:1995
msgid "Failed to rotate. No object selected"
msgstr "Failed to rotate. No object selected"

#: camlib.py:2063
msgid "Object was skewed"
msgstr "Object was skewed"

#: camlib.py:2066
msgid "Failed to skew. No object selected"
msgstr "Failed to skew. No object selected"

#: camlib.py:2263
msgid "There is no such parameter"
msgstr "There is no such parameter"

#: camlib.py:2335
msgid ""
"The Cut Z parameter has positive value. It is the depth value to drill into "
"material.\n"
"The Cut Z parameter needs to have a negative value, assuming it is a typo "
"therefore the app will convert the value to negative. Check the resulting "
"CNC code (Gcode etc)."
msgstr ""
"The Cut Z parameter has positive value. It is the depth value to drill into "
"material.\n"
"The Cut Z parameter needs to have a negative value, assuming it is a typo "
"therefore the app will convert the value to negative. Check the resulting "
"CNC code (Gcode etc)."

#: camlib.py:2343 camlib.py:3018 camlib.py:3368
msgid "The Cut Z parameter is zero. There will be no cut, skipping file"
msgstr "The Cut Z parameter is zero. There will be no cut, skipping file"

#: camlib.py:2395
msgid "Creating a list of points to drill..."
msgstr "Creating a list of points to drill..."

#: camlib.py:2478
msgid "Starting G-Code"
msgstr "Starting G-Code"

#: camlib.py:2576 camlib.py:2723 camlib.py:2828 camlib.py:3134 camlib.py:3482
msgid "Starting G-Code for tool with diameter"
msgstr "Starting G-Code for tool with diameter"

#: camlib.py:2633 camlib.py:2780 camlib.py:2886
msgid "G91 coordinates not implemented"
msgstr "G91 coordinates not implemented"

#: camlib.py:2639 camlib.py:2786 camlib.py:2892
msgid "The loaded Excellon file has no drills"
msgstr "The loaded Excellon file has no drills"

#: camlib.py:2914
msgid "Finished G-Code generation..."
msgstr "Finished G-Code generation..."

#: camlib.py:2991
msgid ""
"The Toolchange X,Y field in Edit -> Preferences has to be in the format (x, "
"y) \n"
"but now there is only one value, not two."
msgstr ""
"The Toolchange X,Y field in Edit -> Preferences has to be in the format (x, "
"y) \n"
"but now there is only one value, not two."

#: camlib.py:3004 camlib.py:3354
msgid ""
"Cut_Z parameter is None or zero. Most likely a bad combinations of other "
"parameters."
msgstr ""
"Cut_Z parameter is None or zero. Most likely a bad combinations of other "
"parameters."

#: camlib.py:3010 camlib.py:3360
msgid ""
"The Cut Z parameter has positive value. It is the depth value to cut into "
"material.\n"
"The Cut Z parameter needs to have a negative value, assuming it is a typo "
"therefore the app will convert the value to negative.Check the resulting CNC "
"code (Gcode etc)."
msgstr ""
"The Cut Z parameter has positive value. It is the depth value to cut into "
"material.\n"
"The Cut Z parameter needs to have a negative value, assuming it is a typo "
"therefore the app will convert the value to negative.Check the resulting CNC "
"code (Gcode etc)."

#: camlib.py:3028 camlib.py:3374
msgid "Travel Z parameter is None or zero."
msgstr "Travel Z parameter is None or zero."

#: camlib.py:3033 camlib.py:3379
msgid ""
"The Travel Z parameter has negative value. It is the height value to travel "
"between cuts.\n"
"The Z Travel parameter needs to have a positive value, assuming it is a typo "
"therefore the app will convert the value to positive.Check the resulting CNC "
"code (Gcode etc)."
msgstr ""
"The Travel Z parameter has negative value. It is the height value to travel "
"between cuts.\n"
"The Z Travel parameter needs to have a positive value, assuming it is a typo "
"therefore the app will convert the value to positive.Check the resulting CNC "
"code (Gcode etc)."

#: camlib.py:3041 camlib.py:3387
msgid "The Z Travel parameter is zero. This is dangerous, skipping file"
msgstr "The Z Travel parameter is zero. This is dangerous, skipping file"

#: camlib.py:3056 camlib.py:3406
msgid "Indexing geometry before generating G-Code..."
msgstr "Indexing geometry before generating G-Code..."

#: camlib.py:3117 camlib.py:3468
msgid "Starting G-Code..."
msgstr "Starting G-Code..."

#: camlib.py:3204 camlib.py:3552
msgid "Finished G-Code generation"
msgstr "Finished G-Code generation"

#: camlib.py:3206
msgid "paths traced"
msgstr "paths traced"

#: camlib.py:3242
msgid "Expected a Geometry, got"
msgstr "Expected a Geometry, got"

#: camlib.py:3249
msgid ""
"Trying to generate a CNC Job from a Geometry object without solid_geometry."
msgstr ""
"Trying to generate a CNC Job from a Geometry object without solid_geometry."

#: camlib.py:3289
msgid ""
"The Tool Offset value is too negative to use for the current_geometry.\n"
"Raise the value (in module) and try again."
msgstr ""
"The Tool Offset value is too negative to use for the current_geometry.\n"
"Raise the value (in module) and try again."

#: camlib.py:3554
msgid " paths traced."
msgstr " paths traced."

#: camlib.py:3583
msgid "There is no tool data in the SolderPaste geometry."
msgstr "There is no tool data in the SolderPaste geometry."

#: camlib.py:3670
msgid "Finished SolderPste G-Code generation"
msgstr "Finished SolderPste G-Code generation"

#: camlib.py:3672
msgid "paths traced."
msgstr "paths traced."

#: camlib.py:4145 camlib.py:4423 camlib.py:4526 camlib.py:4573
msgid "G91 coordinates not implemented ..."
msgstr "G91 coordinates not implemented ..."

#: flatcamEditors/FlatCAMExcEditor.py:46 flatcamEditors/FlatCAMExcEditor.py:71
#: flatcamEditors/FlatCAMExcEditor.py:153
#: flatcamEditors/FlatCAMExcEditor.py:357
#: flatcamEditors/FlatCAMExcEditor.py:549
#: flatcamEditors/FlatCAMGrbEditor.py:239
#: flatcamEditors/FlatCAMGrbEditor.py:244
msgid "Click to place ..."
msgstr "Click to place ..."

#: flatcamEditors/FlatCAMExcEditor.py:55
msgid "To add a drill first select a tool"
msgstr "To add a drill first select a tool"

#: flatcamEditors/FlatCAMExcEditor.py:118
msgid "Done. Drill added."
msgstr "Done. Drill added."

#: flatcamEditors/FlatCAMExcEditor.py:161
msgid "To add an Drill Array first select a tool in Tool Table"
msgstr "To add an Drill Array first select a tool in Tool Table"

#: flatcamEditors/FlatCAMExcEditor.py:177
#: flatcamEditors/FlatCAMExcEditor.py:387
#: flatcamEditors/FlatCAMExcEditor.py:597
#: flatcamEditors/FlatCAMExcEditor.py:1099
#: flatcamEditors/FlatCAMExcEditor.py:1124
#: flatcamEditors/FlatCAMGrbEditor.py:463
#: flatcamEditors/FlatCAMGrbEditor.py:1878
#: flatcamEditors/FlatCAMGrbEditor.py:1906
msgid "Click on target location ..."
msgstr "Click on target location ..."

#: flatcamEditors/FlatCAMExcEditor.py:194
msgid "Click on the Drill Circular Array Start position"
msgstr "Click on the Drill Circular Array Start position"

#: flatcamEditors/FlatCAMExcEditor.py:216
#: flatcamEditors/FlatCAMExcEditor.py:636
#: flatcamEditors/FlatCAMGrbEditor.py:506
msgid "The value is not Float. Check for comma instead of dot separator."
msgstr "The value is not Float. Check for comma instead of dot separator."

#: flatcamEditors/FlatCAMExcEditor.py:220
msgid "The value is mistyped. Check the value"
msgstr "The value is mistyped. Check the value"

#: flatcamEditors/FlatCAMExcEditor.py:319
msgid "Too many drills for the selected spacing angle."
msgstr "Too many drills for the selected spacing angle."

#: flatcamEditors/FlatCAMExcEditor.py:337
msgid "Done. Drill Array added."
msgstr "Done. Drill Array added."

#: flatcamEditors/FlatCAMExcEditor.py:366
msgid "To add a slot first select a tool"
msgstr "To add a slot first select a tool"

#: flatcamEditors/FlatCAMExcEditor.py:424
#: flatcamEditors/FlatCAMExcEditor.py:431
#: flatcamEditors/FlatCAMExcEditor.py:702
#: flatcamEditors/FlatCAMExcEditor.py:709
msgid "Value is missing or wrong format. Add it and retry."
msgstr "Value is missing or wrong format. Add it and retry."

#: flatcamEditors/FlatCAMExcEditor.py:530
msgid "Done. Adding Slot completed."
msgstr "Done. Adding Slot completed."

#: flatcamEditors/FlatCAMExcEditor.py:557
msgid "To add an Slot Array first select a tool in Tool Table"
msgstr "To add an Slot Array first select a tool in Tool Table"

#: flatcamEditors/FlatCAMExcEditor.py:614
msgid "Click on the Slot Circular Array Start position"
msgstr "Click on the Slot Circular Array Start position"

#: flatcamEditors/FlatCAMExcEditor.py:640
#: flatcamEditors/FlatCAMGrbEditor.py:510
msgid "The value is mistyped. Check the value."
msgstr "The value is mistyped. Check the value."

#: flatcamEditors/FlatCAMExcEditor.py:819
msgid "Too many Slots for the selected spacing angle."
msgstr "Too many Slots for the selected spacing angle."

#: flatcamEditors/FlatCAMExcEditor.py:842
msgid "Done. Slot Array added."
msgstr "Done. Slot Array added."

#: flatcamEditors/FlatCAMExcEditor.py:859
msgid "Click on the Drill(s) to resize ..."
msgstr "Click on the Drill(s) to resize ..."

#: flatcamEditors/FlatCAMExcEditor.py:889
msgid "Resize drill(s) failed. Please enter a diameter for resize."
msgstr "Resize drill(s) failed. Please enter a diameter for resize."

#: flatcamEditors/FlatCAMExcEditor.py:979
#: flatcamEditors/FlatCAMExcEditor.py:1049 flatcamGUI/FlatCAMGUI.py:2752
#: flatcamGUI/FlatCAMGUI.py:2963 flatcamGUI/FlatCAMGUI.py:3180
msgid "Cancelled."
msgstr "Cancelled."

#: flatcamEditors/FlatCAMExcEditor.py:1070
msgid "Done. Drill/Slot Resize completed."
msgstr "Done. Drill/Slot Resize completed."

#: flatcamEditors/FlatCAMExcEditor.py:1073
msgid "Cancelled. No drills/slots selected for resize ..."
msgstr "Cancelled. No drills/slots selected for resize ..."

#: flatcamEditors/FlatCAMExcEditor.py:1101
#: flatcamEditors/FlatCAMGrbEditor.py:1880
msgid "Click on reference location ..."
msgstr "Click on reference location ..."

#: flatcamEditors/FlatCAMExcEditor.py:1157
msgid "Done. Drill(s) Move completed."
msgstr "Done. Drill(s) Move completed."

#: flatcamEditors/FlatCAMExcEditor.py:1255
msgid "Done. Drill(s) copied."
msgstr "Done. Drill(s) copied."

#: flatcamEditors/FlatCAMExcEditor.py:1474 flatcamGUI/PreferencesUI.py:2481
msgid "Excellon Editor"
msgstr "Excellon Editor"

#: flatcamEditors/FlatCAMExcEditor.py:1481
#: flatcamEditors/FlatCAMGrbEditor.py:2381
msgid "Name:"
msgstr "Name:"

#: flatcamEditors/FlatCAMExcEditor.py:1487 flatcamGUI/ObjectUI.py:653
#: flatcamGUI/ObjectUI.py:980 flatcamTools/ToolNonCopperClear.py:97
#: flatcamTools/ToolPaint.py:96 flatcamTools/ToolSolderPaste.py:70
msgid "Tools Table"
msgstr "Tools Table"

#: flatcamEditors/FlatCAMExcEditor.py:1489 flatcamGUI/ObjectUI.py:655
msgid ""
"Tools in this Excellon object\n"
"when are used for drilling."
msgstr ""
"Tools in this Excellon object\n"
"when are used for drilling."

#: flatcamEditors/FlatCAMExcEditor.py:1509
msgid "Add/Delete Tool"
msgstr "Add/Delete Tool"

#: flatcamEditors/FlatCAMExcEditor.py:1511
msgid ""
"Add/Delete a tool to the tool list\n"
"for this Excellon object."
msgstr ""
"Add/Delete a tool to the tool list\n"
"for this Excellon object."

#: flatcamEditors/FlatCAMExcEditor.py:1519 flatcamGUI/ObjectUI.py:1098
#: flatcamTools/ToolNonCopperClear.py:213 flatcamTools/ToolPaint.py:160
msgid "Tool Dia"
msgstr "Tool Dia"

#: flatcamEditors/FlatCAMExcEditor.py:1521 flatcamGUI/ObjectUI.py:1101
#: flatcamGUI/PreferencesUI.py:2510
msgid "Diameter for the new tool"
msgstr "Diameter for the new tool"

#: flatcamEditors/FlatCAMExcEditor.py:1529
msgid "Add Tool"
msgstr "Add Tool"

#: flatcamEditors/FlatCAMExcEditor.py:1531
msgid ""
"Add a new tool to the tool list\n"
"with the diameter specified above."
msgstr ""
"Add a new tool to the tool list\n"
"with the diameter specified above."

#: flatcamEditors/FlatCAMExcEditor.py:1543
msgid "Delete Tool"
msgstr "Delete Tool"

#: flatcamEditors/FlatCAMExcEditor.py:1545
msgid ""
"Delete a tool in the tool list\n"
"by selecting a row in the tool table."
msgstr ""
"Delete a tool in the tool list\n"
"by selecting a row in the tool table."

#: flatcamEditors/FlatCAMExcEditor.py:1563 flatcamGUI/FlatCAMGUI.py:1675
msgid "Resize Drill(s)"
msgstr "Resize Drill(s)"

#: flatcamEditors/FlatCAMExcEditor.py:1565
msgid "Resize a drill or a selection of drills."
msgstr "Resize a drill or a selection of drills."

#: flatcamEditors/FlatCAMExcEditor.py:1572
msgid "Resize Dia"
msgstr "Resize Dia"

#: flatcamEditors/FlatCAMExcEditor.py:1574
msgid "Diameter to resize to."
msgstr "Diameter to resize to."

#: flatcamEditors/FlatCAMExcEditor.py:1582
msgid "Resize"
msgstr "Resize"

#: flatcamEditors/FlatCAMExcEditor.py:1584
msgid "Resize drill(s)"
msgstr "Resize drill(s)"

#: flatcamEditors/FlatCAMExcEditor.py:1609 flatcamGUI/FlatCAMGUI.py:1674
#: flatcamGUI/FlatCAMGUI.py:1884
msgid "Add Drill Array"
msgstr "Add Drill Array"

#: flatcamEditors/FlatCAMExcEditor.py:1611
msgid "Add an array of drills (linear or circular array)"
msgstr "Add an array of drills (linear or circular array)"

#: flatcamEditors/FlatCAMExcEditor.py:1617
msgid ""
"Select the type of drills array to create.\n"
"It can be Linear X(Y) or Circular"
msgstr ""
"Select the type of drills array to create.\n"
"It can be Linear X(Y) or Circular"

#: flatcamEditors/FlatCAMExcEditor.py:1620
#: flatcamEditors/FlatCAMExcEditor.py:1822
#: flatcamEditors/FlatCAMGrbEditor.py:2684
msgid "Linear"
msgstr "Linear"

#: flatcamEditors/FlatCAMExcEditor.py:1621
#: flatcamEditors/FlatCAMExcEditor.py:1823
#: flatcamEditors/FlatCAMGrbEditor.py:2685 flatcamGUI/PreferencesUI.py:3472
#: flatcamTools/ToolNonCopperClear.py:204
msgid "Circular"
msgstr "Circular"

#: flatcamEditors/FlatCAMExcEditor.py:1629 flatcamGUI/PreferencesUI.py:2520
msgid "Nr of drills"
msgstr "Nr of drills"

#: flatcamEditors/FlatCAMExcEditor.py:1630 flatcamGUI/PreferencesUI.py:2522
msgid "Specify how many drills to be in the array."
msgstr "Specify how many drills to be in the array."

#: flatcamEditors/FlatCAMExcEditor.py:1647
#: flatcamEditors/FlatCAMExcEditor.py:1694
#: flatcamEditors/FlatCAMExcEditor.py:1758
#: flatcamEditors/FlatCAMExcEditor.py:1849
#: flatcamEditors/FlatCAMExcEditor.py:1896
#: flatcamEditors/FlatCAMGrbEditor.py:1524
#: flatcamEditors/FlatCAMGrbEditor.py:2711
#: flatcamEditors/FlatCAMGrbEditor.py:2756 flatcamGUI/PreferencesUI.py:2614
msgid "Direction"
msgstr "Direction"

#: flatcamEditors/FlatCAMExcEditor.py:1649
#: flatcamEditors/FlatCAMExcEditor.py:1851
#: flatcamEditors/FlatCAMGrbEditor.py:2713 flatcamGUI/PreferencesUI.py:1670
#: flatcamGUI/PreferencesUI.py:2537 flatcamGUI/PreferencesUI.py:2668
msgid ""
"Direction on which the linear array is oriented:\n"
"- 'X' - horizontal axis \n"
"- 'Y' - vertical axis or \n"
"- 'Angle' - a custom angle for the array inclination"
msgstr ""
"Direction on which the linear array is oriented:\n"
"- 'X' - horizontal axis \n"
"- 'Y' - vertical axis or \n"
"- 'Angle' - a custom angle for the array inclination"

#: flatcamEditors/FlatCAMExcEditor.py:1656
#: flatcamEditors/FlatCAMExcEditor.py:1767
#: flatcamEditors/FlatCAMExcEditor.py:1858
#: flatcamEditors/FlatCAMGrbEditor.py:2720 flatcamGUI/PreferencesUI.py:1676
#: flatcamGUI/PreferencesUI.py:2543 flatcamGUI/PreferencesUI.py:2623
#: flatcamGUI/PreferencesUI.py:2674
msgid "X"
msgstr "X"

#: flatcamEditors/FlatCAMExcEditor.py:1657
#: flatcamEditors/FlatCAMExcEditor.py:1768
#: flatcamEditors/FlatCAMExcEditor.py:1859
#: flatcamEditors/FlatCAMGrbEditor.py:2721 flatcamGUI/PreferencesUI.py:1677
#: flatcamGUI/PreferencesUI.py:2544 flatcamGUI/PreferencesUI.py:2624
#: flatcamGUI/PreferencesUI.py:2675
msgid "Y"
msgstr "Y"

#: flatcamEditors/FlatCAMExcEditor.py:1658
#: flatcamEditors/FlatCAMExcEditor.py:1672
#: flatcamEditors/FlatCAMExcEditor.py:1706
#: flatcamEditors/FlatCAMExcEditor.py:1769
#: flatcamEditors/FlatCAMExcEditor.py:1773
#: flatcamEditors/FlatCAMExcEditor.py:1860
#: flatcamEditors/FlatCAMExcEditor.py:1874
#: flatcamEditors/FlatCAMExcEditor.py:1908
#: flatcamEditors/FlatCAMGrbEditor.py:2722
#: flatcamEditors/FlatCAMGrbEditor.py:2735
#: flatcamEditors/FlatCAMGrbEditor.py:2771 flatcamGUI/PreferencesUI.py:1678
#: flatcamGUI/PreferencesUI.py:1695 flatcamGUI/PreferencesUI.py:2545
#: flatcamGUI/PreferencesUI.py:2562 flatcamGUI/PreferencesUI.py:2625
#: flatcamGUI/PreferencesUI.py:2630 flatcamGUI/PreferencesUI.py:2676
#: flatcamGUI/PreferencesUI.py:2693 flatcamTools/ToolDistance.py:60
#: flatcamTools/ToolDistanceMin.py:64 flatcamTools/ToolTransform.py:61
msgid "Angle"
msgstr "Angle"

#: flatcamEditors/FlatCAMExcEditor.py:1662
#: flatcamEditors/FlatCAMExcEditor.py:1864
#: flatcamEditors/FlatCAMGrbEditor.py:2726 flatcamGUI/PreferencesUI.py:1684
#: flatcamGUI/PreferencesUI.py:2551 flatcamGUI/PreferencesUI.py:2682
msgid "Pitch"
msgstr "Pitch"

#: flatcamEditors/FlatCAMExcEditor.py:1664
#: flatcamEditors/FlatCAMExcEditor.py:1866
#: flatcamEditors/FlatCAMGrbEditor.py:2728 flatcamGUI/PreferencesUI.py:1686
#: flatcamGUI/PreferencesUI.py:2553 flatcamGUI/PreferencesUI.py:2684
msgid "Pitch = Distance between elements of the array."
msgstr "Pitch = Distance between elements of the array."

#: flatcamEditors/FlatCAMExcEditor.py:1674
#: flatcamEditors/FlatCAMExcEditor.py:1876
#: flatcamEditors/FlatCAMGrbEditor.py:2737
msgid ""
"Angle at which the linear array is placed.\n"
"The precision is of max 2 decimals.\n"
"Min value is: -359.99 degrees.\n"
"Max value is:  360.00 degrees."
msgstr ""
"Angle at which the linear array is placed.\n"
"The precision is of max 2 decimals.\n"
"Min value is: -359.99 degrees.\n"
"Max value is:  360.00 degrees."

#: flatcamEditors/FlatCAMExcEditor.py:1695
#: flatcamEditors/FlatCAMExcEditor.py:1897
#: flatcamEditors/FlatCAMGrbEditor.py:2758
msgid ""
"Direction for circular array.Can be CW = clockwise or CCW = counter "
"clockwise."
msgstr ""
"Direction for circular array.Can be CW = clockwise or CCW = counter "
"clockwise."

#: flatcamEditors/FlatCAMExcEditor.py:1702
#: flatcamEditors/FlatCAMExcEditor.py:1904
#: flatcamEditors/FlatCAMGrbEditor.py:2766 flatcamGUI/PreferencesUI.py:1714
#: flatcamGUI/PreferencesUI.py:2294 flatcamGUI/PreferencesUI.py:2581
#: flatcamGUI/PreferencesUI.py:2712 flatcamGUI/PreferencesUI.py:3037
msgid "CW"
msgstr "CW"

#: flatcamEditors/FlatCAMExcEditor.py:1703
#: flatcamEditors/FlatCAMExcEditor.py:1905
#: flatcamEditors/FlatCAMGrbEditor.py:2767 flatcamGUI/PreferencesUI.py:1715
#: flatcamGUI/PreferencesUI.py:2295 flatcamGUI/PreferencesUI.py:2582
#: flatcamGUI/PreferencesUI.py:2713 flatcamGUI/PreferencesUI.py:3038
msgid "CCW"
msgstr "CCW"

#: flatcamEditors/FlatCAMExcEditor.py:1707
#: flatcamEditors/FlatCAMExcEditor.py:1909
#: flatcamEditors/FlatCAMGrbEditor.py:2773 flatcamGUI/PreferencesUI.py:1697
#: flatcamGUI/PreferencesUI.py:1723 flatcamGUI/PreferencesUI.py:2564
#: flatcamGUI/PreferencesUI.py:2590 flatcamGUI/PreferencesUI.py:2695
#: flatcamGUI/PreferencesUI.py:2721
msgid "Angle at which each element in circular array is placed."
msgstr "Angle at which each element in circular array is placed."

#: flatcamEditors/FlatCAMExcEditor.py:1737
msgid "Slot Parameters"
msgstr "Slot Parameters"

#: flatcamEditors/FlatCAMExcEditor.py:1739
msgid ""
"Parameters for adding a slot (hole with oval shape)\n"
"either single or as an part of an array."
msgstr ""
"Parameters for adding a slot (hole with oval shape)\n"
"either single or as an part of an array."

#: flatcamEditors/FlatCAMExcEditor.py:1748 flatcamGUI/PreferencesUI.py:2603
#: flatcamTools/ToolProperties.py:350
msgid "Length"
msgstr "Length"

#: flatcamEditors/FlatCAMExcEditor.py:1750 flatcamGUI/PreferencesUI.py:2605
msgid "Length = The length of the slot."
msgstr "Length = The length of the slot."

#: flatcamEditors/FlatCAMExcEditor.py:1760 flatcamGUI/PreferencesUI.py:2616
msgid ""
"Direction on which the slot is oriented:\n"
"- 'X' - horizontal axis \n"
"- 'Y' - vertical axis or \n"
"- 'Angle' - a custom angle for the slot inclination"
msgstr ""
"Direction on which the slot is oriented:\n"
"- 'X' - horizontal axis \n"
"- 'Y' - vertical axis or \n"
"- 'Angle' - a custom angle for the slot inclination"

#: flatcamEditors/FlatCAMExcEditor.py:1775 flatcamGUI/PreferencesUI.py:2632
msgid ""
"Angle at which the slot is placed.\n"
"The precision is of max 2 decimals.\n"
"Min value is: -359.99 degrees.\n"
"Max value is:  360.00 degrees."
msgstr ""
"Angle at which the slot is placed.\n"
"The precision is of max 2 decimals.\n"
"Min value is: -359.99 degrees.\n"
"Max value is:  360.00 degrees."

#: flatcamEditors/FlatCAMExcEditor.py:1808
msgid "Slot Array Parameters"
msgstr "Slot Array Parameters"

#: flatcamEditors/FlatCAMExcEditor.py:1810
msgid "Parameters for the array of slots (linear or circular array)"
msgstr "Parameters for the array of slots (linear or circular array)"

#: flatcamEditors/FlatCAMExcEditor.py:1819
msgid ""
"Select the type of slot array to create.\n"
"It can be Linear X(Y) or Circular"
msgstr ""
"Select the type of slot array to create.\n"
"It can be Linear X(Y) or Circular"

#: flatcamEditors/FlatCAMExcEditor.py:1831 flatcamGUI/PreferencesUI.py:2654
msgid "Nr of slots"
msgstr "Nr of slots"

#: flatcamEditors/FlatCAMExcEditor.py:1832 flatcamGUI/PreferencesUI.py:2656
msgid "Specify how many slots to be in the array."
msgstr "Specify how many slots to be in the array."

#: flatcamEditors/FlatCAMExcEditor.py:2439
msgid ""
"Tool already in the original or actual tool list.\n"
"Save and reedit Excellon if you need to add this tool. "
msgstr ""
"Tool already in the original or actual tool list.\n"
"Save and reedit Excellon if you need to add this tool. "

#: flatcamEditors/FlatCAMExcEditor.py:2448 flatcamGUI/FlatCAMGUI.py:3349
msgid "Added new tool with dia"
msgstr "Added new tool with dia"

#: flatcamEditors/FlatCAMExcEditor.py:2482
msgid "Select a tool in Tool Table"
msgstr "Select a tool in Tool Table"

#: flatcamEditors/FlatCAMExcEditor.py:2515
msgid "Deleted tool with diameter"
msgstr "Deleted tool with diameter"

#: flatcamEditors/FlatCAMExcEditor.py:2665
msgid "Done. Tool edit completed."
msgstr "Done. Tool edit completed."

#: flatcamEditors/FlatCAMExcEditor.py:3211
msgid "There are no Tools definitions in the file. Aborting Excellon creation."
msgstr ""
"There are no Tools definitions in the file. Aborting Excellon creation."

#: flatcamEditors/FlatCAMExcEditor.py:3215
msgid "An internal error has ocurred. See Shell.\n"
msgstr "An internal error has ocurred. See Shell.\n"

#: flatcamEditors/FlatCAMExcEditor.py:3221
msgid "Creating Excellon."
msgstr "Creating Excellon."

#: flatcamEditors/FlatCAMExcEditor.py:3235
msgid "Excellon editing finished."
msgstr "Excellon editing finished."

#: flatcamEditors/FlatCAMExcEditor.py:3253
msgid "Cancelled. There is no Tool/Drill selected"
msgstr "Cancelled. There is no Tool/Drill selected"

#: flatcamEditors/FlatCAMExcEditor.py:3861
msgid "Done. Drill(s) deleted."
msgstr "Done. Drill(s) deleted."

#: flatcamEditors/FlatCAMExcEditor.py:3933
#: flatcamEditors/FlatCAMExcEditor.py:3943
#: flatcamEditors/FlatCAMGrbEditor.py:4703
msgid "Click on the circular array Center position"
msgstr "Click on the circular array Center position"

#: flatcamEditors/FlatCAMGeoEditor.py:83
msgid "Buffer distance:"
msgstr "Buffer distance:"

#: flatcamEditors/FlatCAMGeoEditor.py:84
msgid "Buffer corner:"
msgstr "Buffer corner:"

#: flatcamEditors/FlatCAMGeoEditor.py:86
msgid ""
"There are 3 types of corners:\n"
" - 'Round': the corner is rounded for exterior buffer.\n"
" - 'Square:' the corner is met in a sharp angle for exterior buffer.\n"
" - 'Beveled:' the corner is a line that directly connects the features "
"meeting in the corner"
msgstr ""
"There are 3 types of corners:\n"
" - 'Round': the corner is rounded for exterior buffer.\n"
" - 'Square:' the corner is met in a sharp angle for exterior buffer.\n"
" - 'Beveled:' the corner is a line that directly connects the features "
"meeting in the corner"

#: flatcamEditors/FlatCAMGeoEditor.py:92
#: flatcamEditors/FlatCAMGrbEditor.py:2542
msgid "Round"
msgstr "Round"

#: flatcamEditors/FlatCAMGeoEditor.py:93
#: flatcamEditors/FlatCAMGrbEditor.py:2543
msgid "Square"
msgstr "Square"

#: flatcamEditors/FlatCAMGeoEditor.py:94
#: flatcamEditors/FlatCAMGrbEditor.py:2544
msgid "Beveled"
msgstr "Beveled"

#: flatcamEditors/FlatCAMGeoEditor.py:101
msgid "Buffer Interior"
msgstr "Buffer Interior"

#: flatcamEditors/FlatCAMGeoEditor.py:103
msgid "Buffer Exterior"
msgstr "Buffer Exterior"

#: flatcamEditors/FlatCAMGeoEditor.py:109
msgid "Full Buffer"
msgstr "Full Buffer"

#: flatcamEditors/FlatCAMGeoEditor.py:130
#: flatcamEditors/FlatCAMGeoEditor.py:2777 flatcamGUI/FlatCAMGUI.py:1584
#: flatcamGUI/PreferencesUI.py:1730
msgid "Buffer Tool"
msgstr "Buffer Tool"

#: flatcamEditors/FlatCAMGeoEditor.py:142
#: flatcamEditors/FlatCAMGeoEditor.py:159
#: flatcamEditors/FlatCAMGeoEditor.py:176
#: flatcamEditors/FlatCAMGeoEditor.py:2797
#: flatcamEditors/FlatCAMGeoEditor.py:2827
#: flatcamEditors/FlatCAMGeoEditor.py:2857
#: flatcamEditors/FlatCAMGrbEditor.py:4756
msgid "Buffer distance value is missing or wrong format. Add it and retry."
msgstr "Buffer distance value is missing or wrong format. Add it and retry."

#: flatcamEditors/FlatCAMGeoEditor.py:239
msgid "Font"
msgstr "Font"

#: flatcamEditors/FlatCAMGeoEditor.py:320 flatcamGUI/FlatCAMGUI.py:1845
msgid "Text"
msgstr "Text"

#: flatcamEditors/FlatCAMGeoEditor.py:346
msgid "Text Tool"
msgstr "Text Tool"

#: flatcamEditors/FlatCAMGeoEditor.py:404 flatcamGUI/FlatCAMGUI.py:899
msgid "Tool"
msgstr "Tool"

#: flatcamEditors/FlatCAMGeoEditor.py:435 flatcamGUI/ObjectUI.py:318
#: flatcamGUI/PreferencesUI.py:1239 flatcamGUI/PreferencesUI.py:2767
#: flatcamGUI/PreferencesUI.py:3715 flatcamGUI/PreferencesUI.py:3875
#: flatcamTools/ToolCutOut.py:94
msgid "Tool dia"
msgstr "Tool dia"

#: flatcamEditors/FlatCAMGeoEditor.py:437 flatcamGUI/PreferencesUI.py:3877
msgid ""
"Diameter of the tool to\n"
"be used in the operation."
msgstr ""
"Diameter of the tool to\n"
"be used in the operation."

#: flatcamEditors/FlatCAMGeoEditor.py:446 flatcamGUI/PreferencesUI.py:3557
#: flatcamGUI/PreferencesUI.py:3906 flatcamTools/ToolNonCopperClear.py:295
#: flatcamTools/ToolPaint.py:203
msgid "Overlap Rate"
msgstr "Overlap Rate"

#: flatcamEditors/FlatCAMGeoEditor.py:448 flatcamGUI/PreferencesUI.py:3908
#: flatcamTools/ToolPaint.py:205
#, python-format
msgid ""
"How much (fraction) of the tool width to overlap each tool pass.\n"
"Example:\n"
"A value here of 0.25 means 25%% from the tool diameter found above.\n"
"\n"
"Adjust the value starting with lower values\n"
"and increasing it if areas that should be painted are still \n"
"not painted.\n"
"Lower values = faster processing, faster execution on PCB.\n"
"Higher values = slow processing and slow execution on CNC\n"
"due of too many paths."
msgstr ""
"How much (fraction) of the tool width to overlap each tool pass.\n"
"Example:\n"
"A value here of 0.25 means 25%% from the tool diameter found above.\n"
"\n"
"Adjust the value starting with lower values\n"
"and increasing it if areas that should be painted are still \n"
"not painted.\n"
"Lower values = faster processing, faster execution on PCB.\n"
"Higher values = slow processing and slow execution on CNC\n"
"due of too many paths."

#: flatcamEditors/FlatCAMGeoEditor.py:464 flatcamGUI/PreferencesUI.py:3578
#: flatcamGUI/PreferencesUI.py:3739 flatcamGUI/PreferencesUI.py:3927
#: flatcamTools/ToolNonCopperClear.py:315 flatcamTools/ToolPaint.py:224
msgid "Margin"
msgstr "Margin"

#: flatcamEditors/FlatCAMGeoEditor.py:466 flatcamGUI/PreferencesUI.py:3929
#: flatcamTools/ToolPaint.py:226
msgid ""
"Distance by which to avoid\n"
"the edges of the polygon to\n"
"be painted."
msgstr ""
"Distance by which to avoid\n"
"the edges of the polygon to\n"
"be painted."

#: flatcamEditors/FlatCAMGeoEditor.py:475 flatcamGUI/PreferencesUI.py:3587
#: flatcamGUI/PreferencesUI.py:3938 flatcamTools/ToolNonCopperClear.py:326
#: flatcamTools/ToolPaint.py:237
msgid "Method"
msgstr "Method"

#: flatcamEditors/FlatCAMGeoEditor.py:477
msgid ""
"Algorithm to paint the polygon:<BR><B>Standard</B>: Fixed step inwards."
"<BR><B>Seed-based</B>: Outwards from seed."
msgstr ""
"Algorithm to paint the polygon:<BR><B>Standard</B>: Fixed step inwards."
"<BR><B>Seed-based</B>: Outwards from seed."

#: flatcamEditors/FlatCAMGeoEditor.py:483 flatcamGUI/PreferencesUI.py:3596
#: flatcamGUI/PreferencesUI.py:3947 flatcamTools/ToolNonCopperClear.py:335
#: flatcamTools/ToolPaint.py:246
msgid "Standard"
msgstr "Standard"

#: flatcamEditors/FlatCAMGeoEditor.py:484 flatcamGUI/PreferencesUI.py:3597
#: flatcamGUI/PreferencesUI.py:3948 flatcamTools/ToolNonCopperClear.py:336
#: flatcamTools/ToolPaint.py:247
msgid "Seed-based"
msgstr "Seed-based"

#: flatcamEditors/FlatCAMGeoEditor.py:485 flatcamGUI/PreferencesUI.py:3598
#: flatcamGUI/PreferencesUI.py:3949 flatcamTools/ToolNonCopperClear.py:337
#: flatcamTools/ToolPaint.py:248
msgid "Straight lines"
msgstr "Straight lines"

#: flatcamEditors/FlatCAMGeoEditor.py:490
msgid "Connect:"
msgstr "Connect:"

#: flatcamEditors/FlatCAMGeoEditor.py:492 flatcamGUI/PreferencesUI.py:3605
#: flatcamGUI/PreferencesUI.py:3956 flatcamTools/ToolNonCopperClear.py:344
#: flatcamTools/ToolPaint.py:255
msgid ""
"Draw lines between resulting\n"
"segments to minimize tool lifts."
msgstr ""
"Draw lines between resulting\n"
"segments to minimize tool lifts."

#: flatcamEditors/FlatCAMGeoEditor.py:499
msgid "Contour:"
msgstr "Contour:"

#: flatcamEditors/FlatCAMGeoEditor.py:501 flatcamGUI/PreferencesUI.py:3615
#: flatcamGUI/PreferencesUI.py:3966 flatcamTools/ToolNonCopperClear.py:353
#: flatcamTools/ToolPaint.py:264
msgid ""
"Cut around the perimeter of the polygon\n"
"to trim rough edges."
msgstr ""
"Cut around the perimeter of the polygon\n"
"to trim rough edges."

#: flatcamEditors/FlatCAMGeoEditor.py:512 flatcamGUI/FlatCAMGUI.py:1847
msgid "Paint"
msgstr "Paint"

#: flatcamEditors/FlatCAMGeoEditor.py:530 flatcamGUI/FlatCAMGUI.py:724
#: flatcamGUI/FlatCAMGUI.py:2127 flatcamGUI/ObjectUI.py:1421
#: flatcamTools/ToolPaint.py:25 flatcamTools/ToolPaint.py:492
msgid "Paint Tool"
msgstr "Paint Tool"

#: flatcamEditors/FlatCAMGeoEditor.py:567
msgid "Paint cancelled. No shape selected."
msgstr "Paint cancelled. No shape selected."

#: flatcamEditors/FlatCAMGeoEditor.py:579 flatcamTools/ToolDblSided.py:373
msgid "Tool diameter value is missing or wrong format. Add it and retry."
msgstr "Tool diameter value is missing or wrong format. Add it and retry."

#: flatcamEditors/FlatCAMGeoEditor.py:590
msgid "Overlap value is missing or wrong format. Add it and retry."
msgstr "Overlap value is missing or wrong format. Add it and retry."

#: flatcamEditors/FlatCAMGeoEditor.py:602
msgid "Margin distance value is missing or wrong format. Add it and retry."
msgstr "Margin distance value is missing or wrong format. Add it and retry."

#: flatcamEditors/FlatCAMGeoEditor.py:610
#: flatcamEditors/FlatCAMGeoEditor.py:2803
#: flatcamEditors/FlatCAMGeoEditor.py:2833
#: flatcamEditors/FlatCAMGeoEditor.py:2863 flatcamGUI/PreferencesUI.py:2763
#: flatcamTools/ToolProperties.py:113 flatcamTools/ToolProperties.py:139
msgid "Tools"
msgstr "Tools"

#: flatcamEditors/FlatCAMGeoEditor.py:621
#: flatcamEditors/FlatCAMGeoEditor.py:995
#: flatcamEditors/FlatCAMGrbEditor.py:4947
#: flatcamEditors/FlatCAMGrbEditor.py:5332 flatcamGUI/FlatCAMGUI.py:737
#: flatcamGUI/FlatCAMGUI.py:2140 flatcamTools/ToolTransform.py:370
msgid "Transform Tool"
msgstr "Transform Tool"

#: flatcamEditors/FlatCAMGeoEditor.py:622
#: flatcamEditors/FlatCAMGeoEditor.py:684
#: flatcamEditors/FlatCAMGrbEditor.py:4948
#: flatcamEditors/FlatCAMGrbEditor.py:5010 flatcamTools/ToolTransform.py:24
#: flatcamTools/ToolTransform.py:78
msgid "Rotate"
msgstr "Rotate"

#: flatcamEditors/FlatCAMGeoEditor.py:623
#: flatcamEditors/FlatCAMGrbEditor.py:4949 flatcamTools/ToolTransform.py:25
msgid "Skew/Shear"
msgstr "Skew/Shear"

#: flatcamEditors/FlatCAMGeoEditor.py:624
#: flatcamEditors/FlatCAMGrbEditor.py:2589
#: flatcamEditors/FlatCAMGrbEditor.py:4950 flatcamGUI/FlatCAMGUI.py:812
#: flatcamGUI/FlatCAMGUI.py:1796 flatcamGUI/FlatCAMGUI.py:1874
#: flatcamGUI/FlatCAMGUI.py:2211 flatcamGUI/ObjectUI.py:80
#: flatcamGUI/ObjectUI.py:101 flatcamTools/ToolTransform.py:26
msgid "Scale"
msgstr "Scale"

#: flatcamEditors/FlatCAMGeoEditor.py:625
#: flatcamEditors/FlatCAMGrbEditor.py:4951 flatcamTools/ToolTransform.py:27
msgid "Mirror (Flip)"
msgstr "Mirror (Flip)"

#: flatcamEditors/FlatCAMGeoEditor.py:626
#: flatcamEditors/FlatCAMGrbEditor.py:4952 flatcamGUI/ObjectUI.py:109
#: flatcamGUI/ObjectUI.py:128 flatcamGUI/ObjectUI.py:1013
#: flatcamGUI/ObjectUI.py:1578 flatcamGUI/PreferencesUI.py:3638
#: flatcamTools/ToolNonCopperClear.py:375 flatcamTools/ToolTransform.py:28
msgid "Offset"
msgstr "Offset"

#: flatcamEditors/FlatCAMGeoEditor.py:638
#: flatcamEditors/FlatCAMGrbEditor.py:4964 flatcamGUI/FlatCAMGUI.py:684
#: flatcamGUI/FlatCAMGUI.py:2094
msgid "Editor"
msgstr "Editor"

#: flatcamEditors/FlatCAMGeoEditor.py:670
#: flatcamEditors/FlatCAMGrbEditor.py:4996
msgid "Angle:"
msgstr "Angle:"

#: flatcamEditors/FlatCAMGeoEditor.py:672
#: flatcamEditors/FlatCAMGrbEditor.py:4998 flatcamGUI/PreferencesUI.py:4308
#: flatcamTools/ToolTransform.py:63
msgid ""
"Angle for Rotation action, in degrees.\n"
"Float number between -360 and 359.\n"
"Positive numbers for CW motion.\n"
"Negative numbers for CCW motion."
msgstr ""
"Angle for Rotation action, in degrees.\n"
"Float number between -360 and 359.\n"
"Positive numbers for CW motion.\n"
"Negative numbers for CCW motion."

#: flatcamEditors/FlatCAMGeoEditor.py:686
#: flatcamEditors/FlatCAMGrbEditor.py:5012
msgid ""
"Rotate the selected shape(s).\n"
"The point of reference is the middle of\n"
"the bounding box for all selected shapes."
msgstr ""
"Rotate the selected shape(s).\n"
"The point of reference is the middle of\n"
"the bounding box for all selected shapes."

#: flatcamEditors/FlatCAMGeoEditor.py:709
#: flatcamEditors/FlatCAMGrbEditor.py:5035
msgid "Angle X:"
msgstr "Angle X:"

#: flatcamEditors/FlatCAMGeoEditor.py:711
#: flatcamEditors/FlatCAMGeoEditor.py:729
#: flatcamEditors/FlatCAMGrbEditor.py:5037
#: flatcamEditors/FlatCAMGrbEditor.py:5055 flatcamGUI/PreferencesUI.py:4320
#: flatcamGUI/PreferencesUI.py:4330
msgid ""
"Angle for Skew action, in degrees.\n"
"Float number between -360 and 359."
msgstr ""
"Angle for Skew action, in degrees.\n"
"Float number between -360 and 359."

#: flatcamEditors/FlatCAMGeoEditor.py:720
#: flatcamEditors/FlatCAMGrbEditor.py:5046 flatcamTools/ToolTransform.py:107
msgid "Skew X"
msgstr "Skew X"

#: flatcamEditors/FlatCAMGeoEditor.py:722
#: flatcamEditors/FlatCAMGeoEditor.py:740
#: flatcamEditors/FlatCAMGrbEditor.py:5048
#: flatcamEditors/FlatCAMGrbEditor.py:5066
msgid ""
"Skew/shear the selected shape(s).\n"
"The point of reference is the middle of\n"
"the bounding box for all selected shapes."
msgstr ""
"Skew/shear the selected shape(s).\n"
"The point of reference is the middle of\n"
"the bounding box for all selected shapes."

#: flatcamEditors/FlatCAMGeoEditor.py:727
#: flatcamEditors/FlatCAMGrbEditor.py:5053
msgid "Angle Y:"
msgstr "Angle Y:"

#: flatcamEditors/FlatCAMGeoEditor.py:738
#: flatcamEditors/FlatCAMGrbEditor.py:5064 flatcamTools/ToolTransform.py:129
msgid "Skew Y"
msgstr "Skew Y"

#: flatcamEditors/FlatCAMGeoEditor.py:766
#: flatcamEditors/FlatCAMGrbEditor.py:5092
msgid "Factor X:"
msgstr "Factor X:"

#: flatcamEditors/FlatCAMGeoEditor.py:768
#: flatcamEditors/FlatCAMGrbEditor.py:5094
msgid "Factor for Scale action over X axis."
msgstr "Factor for Scale action over X axis."

#: flatcamEditors/FlatCAMGeoEditor.py:776
#: flatcamEditors/FlatCAMGrbEditor.py:5102 flatcamTools/ToolTransform.py:156
msgid "Scale X"
msgstr "Scale X"

#: flatcamEditors/FlatCAMGeoEditor.py:778
#: flatcamEditors/FlatCAMGeoEditor.py:795
#: flatcamEditors/FlatCAMGrbEditor.py:5104
#: flatcamEditors/FlatCAMGrbEditor.py:5121
msgid ""
"Scale the selected shape(s).\n"
"The point of reference depends on \n"
"the Scale reference checkbox state."
msgstr ""
"Scale the selected shape(s).\n"
"The point of reference depends on \n"
"the Scale reference checkbox state."

#: flatcamEditors/FlatCAMGeoEditor.py:783
#: flatcamEditors/FlatCAMGrbEditor.py:5109
msgid "Factor Y:"
msgstr "Factor Y:"

#: flatcamEditors/FlatCAMGeoEditor.py:785
#: flatcamEditors/FlatCAMGrbEditor.py:5111
msgid "Factor for Scale action over Y axis."
msgstr "Factor for Scale action over Y axis."

#: flatcamEditors/FlatCAMGeoEditor.py:793
#: flatcamEditors/FlatCAMGrbEditor.py:5119 flatcamTools/ToolTransform.py:177
msgid "Scale Y"
msgstr "Scale Y"

#: flatcamEditors/FlatCAMGeoEditor.py:802
#: flatcamEditors/FlatCAMGrbEditor.py:5128 flatcamGUI/PreferencesUI.py:4355
#: flatcamTools/ToolTransform.py:190
msgid "Link"
msgstr "Link"

#: flatcamEditors/FlatCAMGeoEditor.py:804
#: flatcamEditors/FlatCAMGrbEditor.py:5130
msgid ""
"Scale the selected shape(s)\n"
"using the Scale Factor X for both axis."
msgstr ""
"Scale the selected shape(s)\n"
"using the Scale Factor X for both axis."

#: flatcamEditors/FlatCAMGeoEditor.py:810
#: flatcamEditors/FlatCAMGrbEditor.py:5136 flatcamGUI/PreferencesUI.py:4363
#: flatcamTools/ToolTransform.py:198
msgid "Scale Reference"
msgstr "Scale Reference"

#: flatcamEditors/FlatCAMGeoEditor.py:812
#: flatcamEditors/FlatCAMGrbEditor.py:5138
msgid ""
"Scale the selected shape(s)\n"
"using the origin reference when checked,\n"
"and the center of the biggest bounding box\n"
"of the selected shapes when unchecked."
msgstr ""
"Scale the selected shape(s)\n"
"using the origin reference when checked,\n"
"and the center of the biggest bounding box\n"
"of the selected shapes when unchecked."

#: flatcamEditors/FlatCAMGeoEditor.py:840
#: flatcamEditors/FlatCAMGrbEditor.py:5167
msgid "Value X:"
msgstr "Value X:"

#: flatcamEditors/FlatCAMGeoEditor.py:842
#: flatcamEditors/FlatCAMGrbEditor.py:5169
msgid "Value for Offset action on X axis."
msgstr "Value for Offset action on X axis."

#: flatcamEditors/FlatCAMGeoEditor.py:850
#: flatcamEditors/FlatCAMGrbEditor.py:5177 flatcamTools/ToolTransform.py:225
msgid "Offset X"
msgstr "Offset X"

#: flatcamEditors/FlatCAMGeoEditor.py:852
#: flatcamEditors/FlatCAMGeoEditor.py:870
#: flatcamEditors/FlatCAMGrbEditor.py:5179
#: flatcamEditors/FlatCAMGrbEditor.py:5197
msgid ""
"Offset the selected shape(s).\n"
"The point of reference is the middle of\n"
"the bounding box for all selected shapes.\n"
msgstr ""
"Offset the selected shape(s).\n"
"The point of reference is the middle of\n"
"the bounding box for all selected shapes.\n"

#: flatcamEditors/FlatCAMGeoEditor.py:858
#: flatcamEditors/FlatCAMGrbEditor.py:5185
msgid "Value Y:"
msgstr "Value Y:"

#: flatcamEditors/FlatCAMGeoEditor.py:860
#: flatcamEditors/FlatCAMGrbEditor.py:5187
msgid "Value for Offset action on Y axis."
msgstr "Value for Offset action on Y axis."

#: flatcamEditors/FlatCAMGeoEditor.py:868
#: flatcamEditors/FlatCAMGrbEditor.py:5195 flatcamTools/ToolTransform.py:246
msgid "Offset Y"
msgstr "Offset Y"

#: flatcamEditors/FlatCAMGeoEditor.py:899
#: flatcamEditors/FlatCAMGrbEditor.py:5226 flatcamTools/ToolTransform.py:264
msgid "Flip on X"
msgstr "Flip on X"

#: flatcamEditors/FlatCAMGeoEditor.py:901
#: flatcamEditors/FlatCAMGeoEditor.py:909
#: flatcamEditors/FlatCAMGrbEditor.py:5228
#: flatcamEditors/FlatCAMGrbEditor.py:5236
msgid ""
"Flip the selected shape(s) over the X axis.\n"
"Does not create a new shape."
msgstr ""
"Flip the selected shape(s) over the X axis.\n"
"Does not create a new shape."

#: flatcamEditors/FlatCAMGeoEditor.py:907
#: flatcamEditors/FlatCAMGrbEditor.py:5234 flatcamTools/ToolTransform.py:270
msgid "Flip on Y"
msgstr "Flip on Y"

#: flatcamEditors/FlatCAMGeoEditor.py:916
#: flatcamEditors/FlatCAMGrbEditor.py:5243
msgid "Ref Pt"
msgstr "Ref Pt"

#: flatcamEditors/FlatCAMGeoEditor.py:918
#: flatcamEditors/FlatCAMGrbEditor.py:5245
msgid ""
"Flip the selected shape(s)\n"
"around the point in Point Entry Field.\n"
"\n"
"The point coordinates can be captured by\n"
"left click on canvas together with pressing\n"
"SHIFT key. \n"
"Then click Add button to insert coordinates.\n"
"Or enter the coords in format (x, y) in the\n"
"Point Entry field and click Flip on X(Y)"
msgstr ""
"Flip the selected shape(s)\n"
"around the point in Point Entry Field.\n"
"\n"
"The point coordinates can be captured by\n"
"left click on canvas together with pressing\n"
"SHIFT key. \n"
"Then click Add button to insert coordinates.\n"
"Or enter the coords in format (x, y) in the\n"
"Point Entry field and click Flip on X(Y)"

#: flatcamEditors/FlatCAMGeoEditor.py:930
#: flatcamEditors/FlatCAMGrbEditor.py:5257
msgid "Point:"
msgstr "Point:"

#: flatcamEditors/FlatCAMGeoEditor.py:932
#: flatcamEditors/FlatCAMGrbEditor.py:5259 flatcamTools/ToolTransform.py:299
msgid ""
"Coordinates in format (x, y) used as reference for mirroring.\n"
"The 'x' in (x, y) will be used when using Flip on X and\n"
"the 'y' in (x, y) will be used when using Flip on Y."
msgstr ""
"Coordinates in format (x, y) used as reference for mirroring.\n"
"The 'x' in (x, y) will be used when using Flip on X and\n"
"the 'y' in (x, y) will be used when using Flip on Y."

#: flatcamEditors/FlatCAMGeoEditor.py:944
#: flatcamEditors/FlatCAMGrbEditor.py:5271 flatcamTools/ToolTransform.py:310
msgid ""
"The point coordinates can be captured by\n"
"left click on canvas together with pressing\n"
"SHIFT key. Then click Add button to insert."
msgstr ""
"The point coordinates can be captured by\n"
"left click on canvas together with pressing\n"
"SHIFT key. Then click Add button to insert."

#: flatcamEditors/FlatCAMGeoEditor.py:1060
#: flatcamEditors/FlatCAMGrbEditor.py:5397
msgid "Transformation cancelled. No shape selected."
msgstr "Transformation cancelled. No shape selected."

#: flatcamEditors/FlatCAMGeoEditor.py:1269
#: flatcamEditors/FlatCAMGrbEditor.py:5643
msgid "No shape selected. Please Select a shape to rotate!"
msgstr "No shape selected. Please Select a shape to rotate!"

#: flatcamEditors/FlatCAMGeoEditor.py:1272
#: flatcamEditors/FlatCAMGrbEditor.py:5646 flatcamTools/ToolTransform.py:544
msgid "Appying Rotate"
msgstr "Appying Rotate"

#: flatcamEditors/FlatCAMGeoEditor.py:1301
#: flatcamEditors/FlatCAMGrbEditor.py:5680
msgid "Done. Rotate completed."
msgstr "Done. Rotate completed."

#: flatcamEditors/FlatCAMGeoEditor.py:1307
msgid "Rotation action was not executed"
msgstr "Rotation action was not executed"

#: flatcamEditors/FlatCAMGeoEditor.py:1319
#: flatcamEditors/FlatCAMGrbEditor.py:5701
msgid "No shape selected. Please Select a shape to flip!"
msgstr "No shape selected. Please Select a shape to flip!"

#: flatcamEditors/FlatCAMGeoEditor.py:1322
#: flatcamEditors/FlatCAMGrbEditor.py:5704 flatcamTools/ToolTransform.py:597
msgid "Applying Flip"
msgstr "Applying Flip"

#: flatcamEditors/FlatCAMGeoEditor.py:1353
#: flatcamEditors/FlatCAMGrbEditor.py:5744 flatcamTools/ToolTransform.py:640
msgid "Flip on the Y axis done"
msgstr "Flip on the Y axis done"

#: flatcamEditors/FlatCAMGeoEditor.py:1357
#: flatcamEditors/FlatCAMGrbEditor.py:5753 flatcamTools/ToolTransform.py:650
msgid "Flip on the X axis done"
msgstr "Flip on the X axis done"

#: flatcamEditors/FlatCAMGeoEditor.py:1368
msgid "Flip action was not executed"
msgstr "Flip action was not executed"

#: flatcamEditors/FlatCAMGeoEditor.py:1378
#: flatcamEditors/FlatCAMGrbEditor.py:5775
msgid "No shape selected. Please Select a shape to shear/skew!"
msgstr "No shape selected. Please Select a shape to shear/skew!"

#: flatcamEditors/FlatCAMGeoEditor.py:1381
#: flatcamEditors/FlatCAMGrbEditor.py:5778 flatcamTools/ToolTransform.py:675
msgid "Applying Skew"
msgstr "Applying Skew"

#: flatcamEditors/FlatCAMGeoEditor.py:1407
#: flatcamEditors/FlatCAMGrbEditor.py:5815
msgid "Skew on the X axis done"
msgstr "Skew on the X axis done"

#: flatcamEditors/FlatCAMGeoEditor.py:1410
#: flatcamEditors/FlatCAMGrbEditor.py:5818
msgid "Skew on the Y axis done"
msgstr "Skew on the Y axis done"

#: flatcamEditors/FlatCAMGeoEditor.py:1415
msgid "Skew action was not executed"
msgstr "Skew action was not executed"

#: flatcamEditors/FlatCAMGeoEditor.py:1427
#: flatcamEditors/FlatCAMGrbEditor.py:5843
msgid "No shape selected. Please Select a shape to scale!"
msgstr "No shape selected. Please Select a shape to scale!"

#: flatcamEditors/FlatCAMGeoEditor.py:1430
#: flatcamEditors/FlatCAMGrbEditor.py:5846 flatcamTools/ToolTransform.py:727
msgid "Applying Scale"
msgstr "Applying Scale"

#: flatcamEditors/FlatCAMGeoEditor.py:1465
#: flatcamEditors/FlatCAMGrbEditor.py:5886
msgid "Scale on the X axis done"
msgstr "Scale on the X axis done"

#: flatcamEditors/FlatCAMGeoEditor.py:1468
#: flatcamEditors/FlatCAMGrbEditor.py:5889
msgid "Scale on the Y axis done"
msgstr "Scale on the Y axis done"

#: flatcamEditors/FlatCAMGeoEditor.py:1472
msgid "Scale action was not executed"
msgstr "Scale action was not executed"

#: flatcamEditors/FlatCAMGeoEditor.py:1482
#: flatcamEditors/FlatCAMGrbEditor.py:5907
msgid "No shape selected. Please Select a shape to offset!"
msgstr "No shape selected. Please Select a shape to offset!"

#: flatcamEditors/FlatCAMGeoEditor.py:1485
#: flatcamEditors/FlatCAMGrbEditor.py:5910 flatcamTools/ToolTransform.py:782
msgid "Applying Offset"
msgstr "Applying Offset"

#: flatcamEditors/FlatCAMGeoEditor.py:1498
#: flatcamEditors/FlatCAMGrbEditor.py:5934
msgid "Offset on the X axis done"
msgstr "Offset on the X axis done"

#: flatcamEditors/FlatCAMGeoEditor.py:1501
#: flatcamEditors/FlatCAMGrbEditor.py:5937
msgid "Offset on the Y axis done"
msgstr "Offset on the Y axis done"

#: flatcamEditors/FlatCAMGeoEditor.py:1506
msgid "Offset action was not executed"
msgstr "Offset action was not executed"

#: flatcamEditors/FlatCAMGeoEditor.py:1510
#: flatcamEditors/FlatCAMGrbEditor.py:5946
msgid "Rotate ..."
msgstr "Rotate ..."

#: flatcamEditors/FlatCAMGeoEditor.py:1511
#: flatcamEditors/FlatCAMGeoEditor.py:1566
#: flatcamEditors/FlatCAMGeoEditor.py:1583
#: flatcamEditors/FlatCAMGrbEditor.py:5947
#: flatcamEditors/FlatCAMGrbEditor.py:6002
#: flatcamEditors/FlatCAMGrbEditor.py:6019
msgid "Enter an Angle Value (degrees)"
msgstr "Enter an Angle Value (degrees)"

#: flatcamEditors/FlatCAMGeoEditor.py:1520
#: flatcamEditors/FlatCAMGrbEditor.py:5956
msgid "Geometry shape rotate done"
msgstr "Geometry shape rotate done"

#: flatcamEditors/FlatCAMGeoEditor.py:1524
#: flatcamEditors/FlatCAMGrbEditor.py:5960
msgid "Geometry shape rotate cancelled"
msgstr "Geometry shape rotate cancelled"

#: flatcamEditors/FlatCAMGeoEditor.py:1529
#: flatcamEditors/FlatCAMGrbEditor.py:5965
msgid "Offset on X axis ..."
msgstr "Offset on X axis ..."

#: flatcamEditors/FlatCAMGeoEditor.py:1530
#: flatcamEditors/FlatCAMGeoEditor.py:1549
#: flatcamEditors/FlatCAMGrbEditor.py:5966
#: flatcamEditors/FlatCAMGrbEditor.py:5985
msgid "Enter a distance Value"
msgstr "Enter a distance Value"

#: flatcamEditors/FlatCAMGeoEditor.py:1539
#: flatcamEditors/FlatCAMGrbEditor.py:5975
msgid "Geometry shape offset on X axis done"
msgstr "Geometry shape offset on X axis done"

#: flatcamEditors/FlatCAMGeoEditor.py:1543
#: flatcamEditors/FlatCAMGrbEditor.py:5979
msgid "Geometry shape offset X cancelled"
msgstr "Geometry shape offset X cancelled"

#: flatcamEditors/FlatCAMGeoEditor.py:1548
#: flatcamEditors/FlatCAMGrbEditor.py:5984
msgid "Offset on Y axis ..."
msgstr "Offset on Y axis ..."

#: flatcamEditors/FlatCAMGeoEditor.py:1558
#: flatcamEditors/FlatCAMGrbEditor.py:5994
msgid "Geometry shape offset on Y axis done"
msgstr "Geometry shape offset on Y axis done"

#: flatcamEditors/FlatCAMGeoEditor.py:1562
msgid "Geometry shape offset on Y axis canceled"
msgstr "Geometry shape offset on Y axis canceled"

#: flatcamEditors/FlatCAMGeoEditor.py:1565
#: flatcamEditors/FlatCAMGrbEditor.py:6001
msgid "Skew on X axis ..."
msgstr "Skew on X axis ..."

#: flatcamEditors/FlatCAMGeoEditor.py:1575
#: flatcamEditors/FlatCAMGrbEditor.py:6011
msgid "Geometry shape skew on X axis done"
msgstr "Geometry shape skew on X axis done"

#: flatcamEditors/FlatCAMGeoEditor.py:1579
msgid "Geometry shape skew on X axis canceled"
msgstr "Geometry shape skew on X axis canceled"

#: flatcamEditors/FlatCAMGeoEditor.py:1582
#: flatcamEditors/FlatCAMGrbEditor.py:6018
msgid "Skew on Y axis ..."
msgstr "Skew on Y axis ..."

#: flatcamEditors/FlatCAMGeoEditor.py:1592
#: flatcamEditors/FlatCAMGrbEditor.py:6028
msgid "Geometry shape skew on Y axis done"
msgstr "Geometry shape skew on Y axis done"

#: flatcamEditors/FlatCAMGeoEditor.py:1596
msgid "Geometry shape skew on Y axis canceled"
msgstr "Geometry shape skew on Y axis canceled"

#: flatcamEditors/FlatCAMGeoEditor.py:1960
#: flatcamEditors/FlatCAMGeoEditor.py:2012
#: flatcamEditors/FlatCAMGrbEditor.py:1397
#: flatcamEditors/FlatCAMGrbEditor.py:1467
msgid "Click on Center point ..."
msgstr "Click on Center point ..."

#: flatcamEditors/FlatCAMGeoEditor.py:1967
#: flatcamEditors/FlatCAMGrbEditor.py:1405
msgid "Click on Perimeter point to complete ..."
msgstr "Click on Perimeter point to complete ..."

#: flatcamEditors/FlatCAMGeoEditor.py:1997
msgid "Done. Adding Circle completed."
msgstr "Done. Adding Circle completed."

#: flatcamEditors/FlatCAMGeoEditor.py:2032
#: flatcamEditors/FlatCAMGrbEditor.py:1499
msgid "Click on Start point ..."
msgstr "Click on Start point ..."

#: flatcamEditors/FlatCAMGeoEditor.py:2034
#: flatcamEditors/FlatCAMGrbEditor.py:1501
msgid "Click on Point3 ..."
msgstr "Click on Point3 ..."

#: flatcamEditors/FlatCAMGeoEditor.py:2036
#: flatcamEditors/FlatCAMGrbEditor.py:1503
msgid "Click on Stop point ..."
msgstr "Click on Stop point ..."

#: flatcamEditors/FlatCAMGeoEditor.py:2041
#: flatcamEditors/FlatCAMGrbEditor.py:1508
msgid "Click on Stop point to complete ..."
msgstr "Click on Stop point to complete ..."

#: flatcamEditors/FlatCAMGeoEditor.py:2043
#: flatcamEditors/FlatCAMGrbEditor.py:1510
msgid "Click on Point2 to complete ..."
msgstr "Click on Point2 to complete ..."

#: flatcamEditors/FlatCAMGeoEditor.py:2045
#: flatcamEditors/FlatCAMGrbEditor.py:1512
msgid "Click on Center point to complete ..."
msgstr "Click on Center point to complete ..."

#: flatcamEditors/FlatCAMGeoEditor.py:2057
#, python-format
msgid "Direction: %s"
msgstr "Direction: %s"

#: flatcamEditors/FlatCAMGeoEditor.py:2067
#: flatcamEditors/FlatCAMGrbEditor.py:1534
msgid "Mode: Start -> Stop -> Center. Click on Start point ..."
msgstr "Mode: Start -> Stop -> Center. Click on Start point ..."

#: flatcamEditors/FlatCAMGeoEditor.py:2070
#: flatcamEditors/FlatCAMGrbEditor.py:1537
msgid "Mode: Point1 -> Point3 -> Point2. Click on Point1 ..."
msgstr "Mode: Point1 -> Point3 -> Point2. Click on Point1 ..."

#: flatcamEditors/FlatCAMGeoEditor.py:2073
#: flatcamEditors/FlatCAMGrbEditor.py:1540
msgid "Mode: Center -> Start -> Stop. Click on Center point ..."
msgstr "Mode: Center -> Start -> Stop. Click on Center point ..."

#: flatcamEditors/FlatCAMGeoEditor.py:2212
msgid "Done. Arc completed."
msgstr "Done. Arc completed."

#: flatcamEditors/FlatCAMGeoEditor.py:2231
#: flatcamEditors/FlatCAMGeoEditor.py:2285
#: flatcamEditors/FlatCAMGeoEditor.py:2713
msgid "Click on 1st corner ..."
msgstr "Click on 1st corner ..."

#: flatcamEditors/FlatCAMGeoEditor.py:2237
msgid "Click on opposite corner to complete ..."
msgstr "Click on opposite corner to complete ..."

#: flatcamEditors/FlatCAMGeoEditor.py:2266
msgid "Done. Rectangle completed."
msgstr "Done. Rectangle completed."

#: flatcamEditors/FlatCAMGeoEditor.py:2292
msgid "Click on next Point or click right mouse button to complete ..."
msgstr "Click on next Point or click right mouse button to complete ..."

#: flatcamEditors/FlatCAMGeoEditor.py:2321
msgid "Done. Polygon completed."
msgstr "Done. Polygon completed."

#: flatcamEditors/FlatCAMGeoEditor.py:2331
#: flatcamEditors/FlatCAMGeoEditor.py:2377
#: flatcamEditors/FlatCAMGrbEditor.py:1086
#: flatcamEditors/FlatCAMGrbEditor.py:1288
msgid "Backtracked one point ..."
msgstr "Backtracked one point ..."

#: flatcamEditors/FlatCAMGeoEditor.py:2359
msgid "Done. Path completed."
msgstr "Done. Path completed."

#: flatcamEditors/FlatCAMGeoEditor.py:2477
#| msgid "MOVE: No shape selected. Select a shape to move"
msgid "No shape selected. Select a shape to explode"
msgstr "No shape selected. Select a shape to explode"

#: flatcamEditors/FlatCAMGeoEditor.py:2510
#| msgid "Done. Polygon completed."
msgid "Done. Polygons exploded into lines."
msgstr "Done. Polygons exploded into lines."

#: flatcamEditors/FlatCAMGeoEditor.py:2532
msgid "MOVE: No shape selected. Select a shape to move"
msgstr "MOVE: No shape selected. Select a shape to move"

#: flatcamEditors/FlatCAMGeoEditor.py:2534
#: flatcamEditors/FlatCAMGeoEditor.py:2546
msgid " MOVE: Click on reference point ..."
msgstr " MOVE: Click on reference point ..."

#: flatcamEditors/FlatCAMGeoEditor.py:2537
msgid " Click on destination point ..."
msgstr " Click on destination point ..."

#: flatcamEditors/FlatCAMGeoEditor.py:2572
msgid "Done. Geometry(s) Move completed."
msgstr "Done. Geometry(s) Move completed."

#: flatcamEditors/FlatCAMGeoEditor.py:2693
msgid "Done. Geometry(s) Copy completed."
msgstr "Done. Geometry(s) Copy completed."

#: flatcamEditors/FlatCAMGeoEditor.py:2730
msgid ""
"Font not supported. Only Regular, Bold, Italic and BoldItalic are supported. "
"Error"
msgstr ""
"Font not supported. Only Regular, Bold, Italic and BoldItalic are supported. "
"Error"

#: flatcamEditors/FlatCAMGeoEditor.py:2738
msgid "No text to add."
msgstr "No text to add."

#: flatcamEditors/FlatCAMGeoEditor.py:2745
msgid " Done. Adding Text completed."
msgstr " Done. Adding Text completed."

#: flatcamEditors/FlatCAMGeoEditor.py:2773
msgid "Create buffer geometry ..."
msgstr "Create buffer geometry ..."

#: flatcamEditors/FlatCAMGeoEditor.py:2785
#: flatcamEditors/FlatCAMGeoEditor.py:2815
#: flatcamEditors/FlatCAMGeoEditor.py:2845
msgid "Buffer cancelled. No shape selected."
msgstr "Buffer cancelled. No shape selected."

#: flatcamEditors/FlatCAMGeoEditor.py:2810
#: flatcamEditors/FlatCAMGrbEditor.py:4801
msgid "Done. Buffer Tool completed."
msgstr "Done. Buffer Tool completed."

#: flatcamEditors/FlatCAMGeoEditor.py:2840
msgid "Done. Buffer Int Tool completed."
msgstr "Done. Buffer Int Tool completed."

#: flatcamEditors/FlatCAMGeoEditor.py:2870
msgid "Done. Buffer Ext Tool completed."
msgstr "Done. Buffer Ext Tool completed."

#: flatcamEditors/FlatCAMGeoEditor.py:2905
#: flatcamEditors/FlatCAMGrbEditor.py:2087
msgid "Select a shape to act as deletion area ..."
msgstr "Select a shape to act as deletion area ..."

#: flatcamEditors/FlatCAMGeoEditor.py:2907
#: flatcamEditors/FlatCAMGeoEditor.py:2926
#: flatcamEditors/FlatCAMGeoEditor.py:2932
#: flatcamEditors/FlatCAMGrbEditor.py:2089
msgid "Click to pick-up the erase shape..."
msgstr "Click to pick-up the erase shape..."

#: flatcamEditors/FlatCAMGeoEditor.py:2936
#: flatcamEditors/FlatCAMGrbEditor.py:2146
msgid "Click to erase ..."
msgstr "Click to erase ..."

#: flatcamEditors/FlatCAMGeoEditor.py:2966
#: flatcamEditors/FlatCAMGrbEditor.py:2180
msgid "Done. Eraser tool action completed."
msgstr "Done. Eraser tool action completed."

#: flatcamEditors/FlatCAMGeoEditor.py:3009
msgid "Create Paint geometry ..."
msgstr "Create Paint geometry ..."

#: flatcamEditors/FlatCAMGeoEditor.py:3023
#: flatcamEditors/FlatCAMGrbEditor.py:2331
msgid "Shape transformations ..."
msgstr "Shape transformations ..."

#: flatcamEditors/FlatCAMGeoEditor.py:3644
msgid "Editing MultiGeo Geometry, tool"
msgstr "Editing MultiGeo Geometry, tool"

#: flatcamEditors/FlatCAMGeoEditor.py:3646
msgid "with diameter"
msgstr "with diameter"

#: flatcamEditors/FlatCAMGeoEditor.py:4048
msgid "Copy cancelled. No shape selected."
msgstr "Copy cancelled. No shape selected."

#: flatcamEditors/FlatCAMGeoEditor.py:4055 flatcamGUI/FlatCAMGUI.py:3058
#: flatcamGUI/FlatCAMGUI.py:3105 flatcamGUI/FlatCAMGUI.py:3124
#: flatcamGUI/FlatCAMGUI.py:3259 flatcamGUI/FlatCAMGUI.py:3272
#: flatcamGUI/FlatCAMGUI.py:3306 flatcamGUI/FlatCAMGUI.py:3368
msgid "Click on target point."
msgstr "Click on target point."

#: flatcamEditors/FlatCAMGeoEditor.py:4345
#: flatcamEditors/FlatCAMGeoEditor.py:4380
msgid "A selection of at least 2 geo items is required to do Intersection."
msgstr "A selection of at least 2 geo items is required to do Intersection."

#: flatcamEditors/FlatCAMGeoEditor.py:4466
#: flatcamEditors/FlatCAMGeoEditor.py:4575
msgid ""
"Negative buffer value is not accepted. Use Buffer interior to generate an "
"'inside' shape"
msgstr ""
"Negative buffer value is not accepted. Use Buffer interior to generate an "
"'inside' shape"

#: flatcamEditors/FlatCAMGeoEditor.py:4476
#: flatcamEditors/FlatCAMGeoEditor.py:4532
#: flatcamEditors/FlatCAMGeoEditor.py:4584
msgid "Nothing selected for buffering."
msgstr "Nothing selected for buffering."

#: flatcamEditors/FlatCAMGeoEditor.py:4481
#: flatcamEditors/FlatCAMGeoEditor.py:4537
#: flatcamEditors/FlatCAMGeoEditor.py:4589
msgid "Invalid distance for buffering."
msgstr "Invalid distance for buffering."

#: flatcamEditors/FlatCAMGeoEditor.py:4505
#: flatcamEditors/FlatCAMGeoEditor.py:4609
msgid "Failed, the result is empty. Choose a different buffer value."
msgstr "Failed, the result is empty. Choose a different buffer value."

#: flatcamEditors/FlatCAMGeoEditor.py:4516
msgid "Full buffer geometry created."
msgstr "Full buffer geometry created."

#: flatcamEditors/FlatCAMGeoEditor.py:4523
msgid "Negative buffer value is not accepted."
msgstr "Negative buffer value is not accepted."

#: flatcamEditors/FlatCAMGeoEditor.py:4557
msgid "Failed, the result is empty. Choose a smaller buffer value."
msgstr "Failed, the result is empty. Choose a smaller buffer value."

#: flatcamEditors/FlatCAMGeoEditor.py:4568
msgid "Interior buffer geometry created."
msgstr "Interior buffer geometry created."

#: flatcamEditors/FlatCAMGeoEditor.py:4620
msgid "Exterior buffer geometry created."
msgstr "Exterior buffer geometry created."

#: flatcamEditors/FlatCAMGeoEditor.py:4685
msgid "Nothing selected for painting."
msgstr "Nothing selected for painting."

#: flatcamEditors/FlatCAMGeoEditor.py:4692
msgid "Invalid value for"
msgstr "Invalid value for"

#: flatcamEditors/FlatCAMGeoEditor.py:4698
#, python-format
msgid "Could not do Paint. Overlap value has to be less than 1.00 (100%%)."
msgstr "Could not do Paint. Overlap value has to be less than 1.00 (100%%)."

#: flatcamEditors/FlatCAMGeoEditor.py:4757
msgid ""
"Could not do Paint. Try a different combination of parameters. Or a "
"different method of Paint"
msgstr ""
"Could not do Paint. Try a different combination of parameters. Or a "
"different method of Paint"

#: flatcamEditors/FlatCAMGeoEditor.py:4771
msgid "Paint done."
msgstr "Paint done."

#: flatcamEditors/FlatCAMGrbEditor.py:209
msgid "To add an Pad first select a aperture in Aperture Table"
msgstr "To add an Pad first select a aperture in Aperture Table"

#: flatcamEditors/FlatCAMGrbEditor.py:216
#: flatcamEditors/FlatCAMGrbEditor.py:410
msgid "Aperture size is zero. It needs to be greater than zero."
msgstr "Aperture size is zero. It needs to be greater than zero."

#: flatcamEditors/FlatCAMGrbEditor.py:367
#: flatcamEditors/FlatCAMGrbEditor.py:675
msgid ""
"Incompatible aperture type. Select an aperture with type 'C', 'R' or 'O'."
msgstr ""
"Incompatible aperture type. Select an aperture with type 'C', 'R' or 'O'."

#: flatcamEditors/FlatCAMGrbEditor.py:380
msgid "Done. Adding Pad completed."
msgstr "Done. Adding Pad completed."

#: flatcamEditors/FlatCAMGrbEditor.py:402
msgid "To add an Pad Array first select a aperture in Aperture Table"
msgstr "To add an Pad Array first select a aperture in Aperture Table"

#: flatcamEditors/FlatCAMGrbEditor.py:480
msgid "Click on the Pad Circular Array Start position"
msgstr "Click on the Pad Circular Array Start position"

#: flatcamEditors/FlatCAMGrbEditor.py:701
msgid "Too many Pads for the selected spacing angle."
msgstr "Too many Pads for the selected spacing angle."

#: flatcamEditors/FlatCAMGrbEditor.py:724
msgid "Done. Pad Array added."
msgstr "Done. Pad Array added."

#: flatcamEditors/FlatCAMGrbEditor.py:745
msgid "Select shape(s) and then click ..."
msgstr "Select shape(s) and then click ..."

#: flatcamEditors/FlatCAMGrbEditor.py:757
msgid "Failed. Nothing selected."
msgstr "Failed. Nothing selected."

#: flatcamEditors/FlatCAMGrbEditor.py:773
msgid ""
"Failed. Poligonize works only on geometries belonging to the same aperture."
msgstr ""
"Failed. Poligonize works only on geometries belonging to the same aperture."

#: flatcamEditors/FlatCAMGrbEditor.py:827
msgid "Done. Poligonize completed."
msgstr "Done. Poligonize completed."

#: flatcamEditors/FlatCAMGrbEditor.py:880
#: flatcamEditors/FlatCAMGrbEditor.py:1103
#: flatcamEditors/FlatCAMGrbEditor.py:1127
msgid "Corner Mode 1: 45 degrees ..."
msgstr "Corner Mode 1: 45 degrees ..."

#: flatcamEditors/FlatCAMGrbEditor.py:882
msgid "Click on 1st point ..."
msgstr "Click on 1st point ..."

#: flatcamEditors/FlatCAMGrbEditor.py:892
#: flatcamEditors/FlatCAMGrbEditor.py:1203
msgid "Click on next Point or click Right mouse button to complete ..."
msgstr "Click on next Point or click Right mouse button to complete ..."

#: flatcamEditors/FlatCAMGrbEditor.py:1091
#: flatcamEditors/FlatCAMGrbEditor.py:1124
msgid "Corner Mode 2: Reverse 45 degrees ..."
msgstr "Corner Mode 2: Reverse 45 degrees ..."

#: flatcamEditors/FlatCAMGrbEditor.py:1094
#: flatcamEditors/FlatCAMGrbEditor.py:1121
msgid "Corner Mode 3: 90 degrees ..."
msgstr "Corner Mode 3: 90 degrees ..."

#: flatcamEditors/FlatCAMGrbEditor.py:1097
#: flatcamEditors/FlatCAMGrbEditor.py:1118
msgid "Corner Mode 4: Reverse 90 degrees ..."
msgstr "Corner Mode 4: Reverse 90 degrees ..."

#: flatcamEditors/FlatCAMGrbEditor.py:1100
#: flatcamEditors/FlatCAMGrbEditor.py:1115
msgid "Corner Mode 5: Free angle ..."
msgstr "Corner Mode 5: Free angle ..."

#: flatcamEditors/FlatCAMGrbEditor.py:1154
#: flatcamEditors/FlatCAMGrbEditor.py:1320
#: flatcamEditors/FlatCAMGrbEditor.py:1359
msgid "Track Mode 1: 45 degrees ..."
msgstr "Track Mode 1: 45 degrees ..."

#: flatcamEditors/FlatCAMGrbEditor.py:1300
#: flatcamEditors/FlatCAMGrbEditor.py:1354
msgid "Track Mode 2: Reverse 45 degrees ..."
msgstr "Track Mode 2: Reverse 45 degrees ..."

#: flatcamEditors/FlatCAMGrbEditor.py:1305
#: flatcamEditors/FlatCAMGrbEditor.py:1349
msgid "Track Mode 3: 90 degrees ..."
msgstr "Track Mode 3: 90 degrees ..."

#: flatcamEditors/FlatCAMGrbEditor.py:1310
#: flatcamEditors/FlatCAMGrbEditor.py:1344
msgid "Track Mode 4: Reverse 90 degrees ..."
msgstr "Track Mode 4: Reverse 90 degrees ..."

#: flatcamEditors/FlatCAMGrbEditor.py:1315
#: flatcamEditors/FlatCAMGrbEditor.py:1339
msgid "Track Mode 5: Free angle ..."
msgstr "Track Mode 5: Free angle ..."

#: flatcamEditors/FlatCAMGrbEditor.py:1721
msgid "Scale the selected Gerber apertures ..."
msgstr "Scale the selected Gerber apertures ..."

#: flatcamEditors/FlatCAMGrbEditor.py:1763
msgid "Buffer the selected apertures ..."
msgstr "Buffer the selected apertures ..."

#: flatcamEditors/FlatCAMGrbEditor.py:1805
msgid "Mark polygon areas in the edited Gerber ..."
msgstr "Mark polygon areas in the edited Gerber ..."

#: flatcamEditors/FlatCAMGrbEditor.py:1871
msgid "Nothing selected to move"
msgstr "Nothing selected to move"

#: flatcamEditors/FlatCAMGrbEditor.py:1995
msgid "Done. Apertures Move completed."
msgstr "Done. Apertures Move completed."

#: flatcamEditors/FlatCAMGrbEditor.py:2072
msgid "Done. Apertures copied."
msgstr "Done. Apertures copied."

#: flatcamEditors/FlatCAMGrbEditor.py:2374 flatcamGUI/FlatCAMGUI.py:1860
#: flatcamGUI/PreferencesUI.py:1582
msgid "Gerber Editor"
msgstr "Gerber Editor"

#: flatcamEditors/FlatCAMGrbEditor.py:2394 flatcamGUI/ObjectUI.py:193
#: flatcamTools/ToolProperties.py:137
msgid "Apertures"
msgstr "Apertures"

#: flatcamEditors/FlatCAMGrbEditor.py:2396 flatcamGUI/ObjectUI.py:195
msgid "Apertures Table for the Gerber Object."
msgstr "Apertures Table for the Gerber Object."

#: flatcamEditors/FlatCAMGrbEditor.py:2407
#: flatcamEditors/FlatCAMGrbEditor.py:3735 flatcamGUI/ObjectUI.py:228
msgid "Code"
msgstr "Code"

#: flatcamEditors/FlatCAMGrbEditor.py:2407
#: flatcamEditors/FlatCAMGrbEditor.py:3735 flatcamGUI/ObjectUI.py:228
#: flatcamGUI/ObjectUI.py:1013 flatcamGUI/ObjectUI.py:1578
msgid "Type"
msgstr "Type"

#: flatcamEditors/FlatCAMGrbEditor.py:2407
#: flatcamEditors/FlatCAMGrbEditor.py:3735 flatcamGUI/ObjectUI.py:228
msgid "Size"
msgstr "Size"

#: flatcamEditors/FlatCAMGrbEditor.py:2407
#: flatcamEditors/FlatCAMGrbEditor.py:3735 flatcamGUI/ObjectUI.py:228
msgid "Dim"
msgstr "Dim"

#: flatcamEditors/FlatCAMGrbEditor.py:2411 flatcamGUI/ObjectUI.py:232
msgid "Index"
msgstr "Index"

#: flatcamEditors/FlatCAMGrbEditor.py:2413
#: flatcamEditors/FlatCAMGrbEditor.py:2440 flatcamGUI/ObjectUI.py:234
msgid "Aperture Code"
msgstr "Aperture Code"

#: flatcamEditors/FlatCAMGrbEditor.py:2415 flatcamGUI/ObjectUI.py:236
msgid "Type of aperture: circular, rectangle, macros etc"
msgstr "Type of aperture: circular, rectangle, macros etc"

#: flatcamEditors/FlatCAMGrbEditor.py:2417 flatcamGUI/ObjectUI.py:238
msgid "Aperture Size:"
msgstr "Aperture Size:"

#: flatcamEditors/FlatCAMGrbEditor.py:2419 flatcamGUI/ObjectUI.py:240
msgid ""
"Aperture Dimensions:\n"
" - (width, height) for R, O type.\n"
" - (dia, nVertices) for P type"
msgstr ""
"Aperture Dimensions:\n"
" - (width, height) for R, O type.\n"
" - (dia, nVertices) for P type"

#: flatcamEditors/FlatCAMGrbEditor.py:2442 flatcamGUI/PreferencesUI.py:1611
msgid "Code for the new aperture"
msgstr "Code for the new aperture"

#: flatcamEditors/FlatCAMGrbEditor.py:2450
msgid "Aperture Size"
msgstr "Aperture Size"

#: flatcamEditors/FlatCAMGrbEditor.py:2452
msgid ""
"Size for the new aperture.\n"
"If aperture type is 'R' or 'O' then\n"
"this value is automatically\n"
"calculated as:\n"
"sqrt(width**2 + height**2)"
msgstr ""
"Size for the new aperture.\n"
"If aperture type is 'R' or 'O' then\n"
"this value is automatically\n"
"calculated as:\n"
"sqrt(width**2 + height**2)"

#: flatcamEditors/FlatCAMGrbEditor.py:2464
msgid "Aperture Type"
msgstr "Aperture Type"

#: flatcamEditors/FlatCAMGrbEditor.py:2466
msgid ""
"Select the type of new aperture. Can be:\n"
"C = circular\n"
"R = rectangular\n"
"O = oblong"
msgstr ""
"Select the type of new aperture. Can be:\n"
"C = circular\n"
"R = rectangular\n"
"O = oblong"

#: flatcamEditors/FlatCAMGrbEditor.py:2477
msgid "Aperture Dim"
msgstr "Aperture Dim"

#: flatcamEditors/FlatCAMGrbEditor.py:2479
msgid ""
"Dimensions for the new aperture.\n"
"Active only for rectangular apertures (type R).\n"
"The format is (width, height)"
msgstr ""
"Dimensions for the new aperture.\n"
"Active only for rectangular apertures (type R).\n"
"The format is (width, height)"

#: flatcamEditors/FlatCAMGrbEditor.py:2488
msgid "Add/Delete Aperture"
msgstr "Add/Delete Aperture"

#: flatcamEditors/FlatCAMGrbEditor.py:2490
msgid "Add/Delete an aperture in the aperture table"
msgstr "Add/Delete an aperture in the aperture table"

#: flatcamEditors/FlatCAMGrbEditor.py:2499
msgid "Add a new aperture to the aperture list."
msgstr "Add a new aperture to the aperture list."

#: flatcamEditors/FlatCAMGrbEditor.py:2504
msgid "Delete a aperture in the aperture list"
msgstr "Delete a aperture in the aperture list"

#: flatcamEditors/FlatCAMGrbEditor.py:2521
msgid "Buffer Aperture"
msgstr "Buffer Aperture"

#: flatcamEditors/FlatCAMGrbEditor.py:2523
msgid "Buffer a aperture in the aperture list"
msgstr "Buffer a aperture in the aperture list"

#: flatcamEditors/FlatCAMGrbEditor.py:2533 flatcamGUI/PreferencesUI.py:1734
msgid "Buffer distance"
msgstr "Buffer distance"

#: flatcamEditors/FlatCAMGrbEditor.py:2534
msgid "Buffer corner"
msgstr "Buffer corner"

#: flatcamEditors/FlatCAMGrbEditor.py:2536
msgid ""
"There are 3 types of corners:\n"
" - 'Round': the corner is rounded.\n"
" - 'Square:' the corner is met in a sharp angle.\n"
" - 'Beveled:' the corner is a line that directly connects the features "
"meeting in the corner"
msgstr ""
"There are 3 types of corners:\n"
" - 'Round': the corner is rounded.\n"
" - 'Square:' the corner is met in a sharp angle.\n"
" - 'Beveled:' the corner is a line that directly connects the features "
"meeting in the corner"

#: flatcamEditors/FlatCAMGrbEditor.py:2551 flatcamGUI/FlatCAMGUI.py:811
#: flatcamGUI/FlatCAMGUI.py:1794 flatcamGUI/FlatCAMGUI.py:1846
#: flatcamGUI/FlatCAMGUI.py:1873 flatcamGUI/FlatCAMGUI.py:2210
msgid "Buffer"
msgstr "Buffer"

#: flatcamEditors/FlatCAMGrbEditor.py:2566
msgid "Scale Aperture"
msgstr "Scale Aperture"

#: flatcamEditors/FlatCAMGrbEditor.py:2568
msgid "Scale a aperture in the aperture list"
msgstr "Scale a aperture in the aperture list"

#: flatcamEditors/FlatCAMGrbEditor.py:2576 flatcamGUI/PreferencesUI.py:1747
msgid "Scale factor"
msgstr "Scale factor"

#: flatcamEditors/FlatCAMGrbEditor.py:2578
msgid ""
"The factor by which to scale the selected aperture.\n"
"Values can be between 0.0000 and 999.9999"
msgstr ""
"The factor by which to scale the selected aperture.\n"
"Values can be between 0.0000 and 999.9999"

#: flatcamEditors/FlatCAMGrbEditor.py:2604
#| msgid "Mark polygon areas"
msgid "Mark polygons"
msgstr "Mark polygons"

#: flatcamEditors/FlatCAMGrbEditor.py:2606
msgid "Mark the polygon areas."
msgstr "Mark the polygon areas."

#: flatcamEditors/FlatCAMGrbEditor.py:2614
msgid "Area UPPER threshold"
msgstr "Area UPPER threshold"

#: flatcamEditors/FlatCAMGrbEditor.py:2616
msgid ""
"The threshold value, all areas less than this are marked.\n"
"Can have a value between 0.0000 and 9999.9999"
msgstr ""
"The threshold value, all areas less than this are marked.\n"
"Can have a value between 0.0000 and 9999.9999"

#: flatcamEditors/FlatCAMGrbEditor.py:2623
msgid "Area LOWER threshold"
msgstr "Area LOWER threshold"

#: flatcamEditors/FlatCAMGrbEditor.py:2625
msgid ""
"The threshold value, all areas more than this are marked.\n"
"Can have a value between 0.0000 and 9999.9999"
msgstr ""
"The threshold value, all areas more than this are marked.\n"
"Can have a value between 0.0000 and 9999.9999"

#: flatcamEditors/FlatCAMGrbEditor.py:2639
#| msgid "Mark All"
msgid "Mark"
msgstr "Mark"

#: flatcamEditors/FlatCAMGrbEditor.py:2641
#| msgid "Mark the polygon areas."
msgid "Mark the polygons that fit within limits."
msgstr "Mark the polygons that fit within limits."

#: flatcamEditors/FlatCAMGrbEditor.py:2647
#| msgid "Resets all the fields."
msgid "Delete all the marked polygons."
msgstr "Delete all the marked polygons."

#: flatcamEditors/FlatCAMGrbEditor.py:2651 flatcamGUI/PreferencesUI.py:642
msgid "Clear"
msgstr "Clear"

#: flatcamEditors/FlatCAMGrbEditor.py:2653
msgid "Clear all the markings."
msgstr "Clear all the markings."

#: flatcamEditors/FlatCAMGrbEditor.py:2673 flatcamGUI/FlatCAMGUI.py:801
#: flatcamGUI/FlatCAMGUI.py:1794 flatcamGUI/FlatCAMGUI.py:2200
msgid "Add Pad Array"
msgstr "Add Pad Array"

#: flatcamEditors/FlatCAMGrbEditor.py:2675
msgid "Add an array of pads (linear or circular array)"
msgstr "Add an array of pads (linear or circular array)"

#: flatcamEditors/FlatCAMGrbEditor.py:2681
msgid ""
"Select the type of pads array to create.\n"
"It can be Linear X(Y) or Circular"
msgstr ""
"Select the type of pads array to create.\n"
"It can be Linear X(Y) or Circular"

#: flatcamEditors/FlatCAMGrbEditor.py:2692 flatcamGUI/PreferencesUI.py:1646
msgid "Nr of pads"
msgstr "Nr of pads"

#: flatcamEditors/FlatCAMGrbEditor.py:2694 flatcamGUI/PreferencesUI.py:1648
msgid "Specify how many pads to be in the array."
msgstr "Specify how many pads to be in the array."

#: flatcamEditors/FlatCAMGrbEditor.py:3216
#: flatcamEditors/FlatCAMGrbEditor.py:3220
msgid "Aperture code value is missing or wrong format. Add it and retry."
msgstr "Aperture code value is missing or wrong format. Add it and retry."

#: flatcamEditors/FlatCAMGrbEditor.py:3256
msgid ""
"Aperture dimensions value is missing or wrong format. Add it in format "
"(width, height) and retry."
msgstr ""
"Aperture dimensions value is missing or wrong format. Add it in format "
"(width, height) and retry."

#: flatcamEditors/FlatCAMGrbEditor.py:3269
msgid "Aperture size value is missing or wrong format. Add it and retry."
msgstr "Aperture size value is missing or wrong format. Add it and retry."

#: flatcamEditors/FlatCAMGrbEditor.py:3280
msgid "Aperture already in the aperture table."
msgstr "Aperture already in the aperture table."

#: flatcamEditors/FlatCAMGrbEditor.py:3288
msgid "Added new aperture with code"
msgstr "Added new aperture with code"

#: flatcamEditors/FlatCAMGrbEditor.py:3317
msgid " Select an aperture in Aperture Table"
msgstr " Select an aperture in Aperture Table"

#: flatcamEditors/FlatCAMGrbEditor.py:3324
msgid "Select an aperture in Aperture Table -->"
msgstr "Select an aperture in Aperture Table -->"

#: flatcamEditors/FlatCAMGrbEditor.py:3348
msgid "Deleted aperture with code"
msgstr "Deleted aperture with code"

#: flatcamEditors/FlatCAMGrbEditor.py:3861
msgid "Adding geometry for aperture"
msgstr "Adding geometry for aperture"

#: flatcamEditors/FlatCAMGrbEditor.py:4044
msgid ""
"There are no Aperture definitions in the file. Aborting Gerber creation."
msgstr ""
"There are no Aperture definitions in the file. Aborting Gerber creation."

#: flatcamEditors/FlatCAMGrbEditor.py:4054
msgid "Creating Gerber."
msgstr "Creating Gerber."

#: flatcamEditors/FlatCAMGrbEditor.py:4063
msgid "Done. Gerber editing finished."
msgstr "Done. Gerber editing finished."

#: flatcamEditors/FlatCAMGrbEditor.py:4080
msgid "Cancelled. No aperture is selected"
msgstr "Cancelled. No aperture is selected"

#: flatcamEditors/FlatCAMGrbEditor.py:4632
msgid "Failed. No aperture geometry is selected."
msgstr "Failed. No aperture geometry is selected."

#: flatcamEditors/FlatCAMGrbEditor.py:4641
#: flatcamEditors/FlatCAMGrbEditor.py:4913
msgid "Done. Apertures geometry deleted."
msgstr "Done. Apertures geometry deleted."

#: flatcamEditors/FlatCAMGrbEditor.py:4784
msgid "No aperture to buffer. Select at least one aperture and try again."
msgstr "No aperture to buffer. Select at least one aperture and try again."

#: flatcamEditors/FlatCAMGrbEditor.py:4797
msgid "Failed."
msgstr "Failed."

#: flatcamEditors/FlatCAMGrbEditor.py:4816
msgid "Scale factor value is missing or wrong format. Add it and retry."
msgstr "Scale factor value is missing or wrong format. Add it and retry."

#: flatcamEditors/FlatCAMGrbEditor.py:4848
msgid "No aperture to scale. Select at least one aperture and try again."
msgstr "No aperture to scale. Select at least one aperture and try again."

#: flatcamEditors/FlatCAMGrbEditor.py:4864
msgid "Done. Scale Tool completed."
msgstr "Done. Scale Tool completed."

#: flatcamEditors/FlatCAMGrbEditor.py:4902
#| msgid "Polygon areas marked."
msgid "Polygons marked."
msgstr "Polygons marked."

#: flatcamEditors/FlatCAMGrbEditor.py:4905
msgid "No polygons were marked. None fit within the limits."
msgstr "No polygons were marked. None fit within the limits."

#: flatcamEditors/FlatCAMGrbEditor.py:5684
msgid "Rotation action was not executed."
msgstr "Rotation action was not executed."

#: flatcamEditors/FlatCAMGrbEditor.py:5823
msgid "Skew action was not executed."
msgstr "Skew action was not executed."

#: flatcamEditors/FlatCAMGrbEditor.py:5893
msgid "Scale action was not executed."
msgstr "Scale action was not executed."

#: flatcamEditors/FlatCAMGrbEditor.py:5942
msgid "Offset action was not executed."
msgstr "Offset action was not executed."

#: flatcamEditors/FlatCAMGrbEditor.py:5998
msgid "Geometry shape offset Y cancelled"
msgstr "Geometry shape offset Y cancelled"

#: flatcamEditors/FlatCAMGrbEditor.py:6015
msgid "Geometry shape skew X cancelled"
msgstr "Geometry shape skew X cancelled"

#: flatcamEditors/FlatCAMGrbEditor.py:6032
msgid "Geometry shape skew Y cancelled"
msgstr "Geometry shape skew Y cancelled"

#: flatcamEditors/FlatCAMTextEditor.py:47
msgid "Print Preview"
msgstr "Print Preview"

#: flatcamEditors/FlatCAMTextEditor.py:48
msgid "Open a OS standard Preview Print window."
msgstr "Open a OS standard Preview Print window."

#: flatcamEditors/FlatCAMTextEditor.py:51
msgid "Print Code"
msgstr "Print Code"

#: flatcamEditors/FlatCAMTextEditor.py:52
msgid "Open a OS standard Print window."
msgstr "Open a OS standard Print window."

#: flatcamEditors/FlatCAMTextEditor.py:54
msgid "Find in Code"
msgstr "Find in Code"

#: flatcamEditors/FlatCAMTextEditor.py:55
msgid "Will search and highlight in yellow the string in the Find box."
msgstr "Will search and highlight in yellow the string in the Find box."

#: flatcamEditors/FlatCAMTextEditor.py:59
msgid "Find box. Enter here the strings to be searched in the text."
msgstr "Find box. Enter here the strings to be searched in the text."

#: flatcamEditors/FlatCAMTextEditor.py:61
msgid "Replace With"
msgstr "Replace With"

#: flatcamEditors/FlatCAMTextEditor.py:62
msgid ""
"Will replace the string from the Find box with the one in the Replace box."
msgstr ""
"Will replace the string from the Find box with the one in the Replace box."

#: flatcamEditors/FlatCAMTextEditor.py:66
msgid "String to replace the one in the Find box throughout the text."
msgstr "String to replace the one in the Find box throughout the text."

#: flatcamEditors/FlatCAMTextEditor.py:68 flatcamGUI/ObjectUI.py:1468
#: flatcamGUI/PreferencesUI.py:3157 flatcamGUI/PreferencesUI.py:3986
msgid "All"
msgstr "All"

#: flatcamEditors/FlatCAMTextEditor.py:69
msgid ""
"When checked it will replace all instances in the 'Find' box\n"
"with the text in the 'Replace' box.."
msgstr ""
"When checked it will replace all instances in the 'Find' box\n"
"with the text in the 'Replace' box.."

#: flatcamEditors/FlatCAMTextEditor.py:72
msgid "Copy All"
msgstr "Copy All"

#: flatcamEditors/FlatCAMTextEditor.py:73
msgid "Will copy all the text in the Code Editor to the clipboard."
msgstr "Will copy all the text in the Code Editor to the clipboard."

#: flatcamEditors/FlatCAMTextEditor.py:76
msgid "Open Code"
msgstr "Open Code"

#: flatcamEditors/FlatCAMTextEditor.py:77
msgid "Will open a text file in the editor."
msgstr "Will open a text file in the editor."

#: flatcamEditors/FlatCAMTextEditor.py:79
msgid "Save Code"
msgstr "Save Code"

#: flatcamEditors/FlatCAMTextEditor.py:80
msgid "Will save the text in the editor into a file."
msgstr "Will save the text in the editor into a file."

#: flatcamEditors/FlatCAMTextEditor.py:82
msgid "Run Code"
msgstr "Run Code"

#: flatcamEditors/FlatCAMTextEditor.py:83
msgid "Will run the TCL commands found in the text file, one by one."
msgstr "Will run the TCL commands found in the text file, one by one."

#: flatcamEditors/FlatCAMTextEditor.py:158
msgid "Open file"
msgstr "Open file"

#: flatcamEditors/FlatCAMTextEditor.py:189
#: flatcamEditors/FlatCAMTextEditor.py:194
msgid "Export G-Code ..."
msgstr "Export G-Code ..."

#: flatcamEditors/FlatCAMTextEditor.py:197
msgid "Export Code cancelled."
msgstr "Export Code cancelled."

#: flatcamEditors/FlatCAMTextEditor.py:264
msgid "Code Editor content copied to clipboard ..."
msgstr "Code Editor content copied to clipboard ..."

#: flatcamGUI/FlatCAMGUI.py:55
#| msgid "&File"
msgid "File"
msgstr "File"

#: flatcamGUI/FlatCAMGUI.py:60
msgid "&New Project ...\tCTRL+N"
msgstr "&New Project ...\tCTRL+N"

#: flatcamGUI/FlatCAMGUI.py:62
msgid "Will create a new, blank project"
msgstr "Will create a new, blank project"

#: flatcamGUI/FlatCAMGUI.py:67
msgid "&New"
msgstr "&New"

#: flatcamGUI/FlatCAMGUI.py:70
msgid "Geometry\tN"
msgstr "Geometry\tN"

#: flatcamGUI/FlatCAMGUI.py:72
msgid "Will create a new, empty Geometry Object."
msgstr "Will create a new, empty Geometry Object."

#: flatcamGUI/FlatCAMGUI.py:74
msgid "Gerber\tB"
msgstr "Gerber\tB"

#: flatcamGUI/FlatCAMGUI.py:76
msgid "Will create a new, empty Gerber Object."
msgstr "Will create a new, empty Gerber Object."

#: flatcamGUI/FlatCAMGUI.py:78
msgid "Excellon\tL"
msgstr "Excellon\tL"

#: flatcamGUI/FlatCAMGUI.py:80
msgid "Will create a new, empty Excellon Object."
msgstr "Will create a new, empty Excellon Object."

#: flatcamGUI/FlatCAMGUI.py:84
msgid "Document\tD"
msgstr "Document\tD"

#: flatcamGUI/FlatCAMGUI.py:86
#| msgid "Will create a new, empty Geometry Object."
msgid "Will create a new, empty Document Object."
msgstr "Will create a new, empty Document Object."

#: flatcamGUI/FlatCAMGUI.py:89 flatcamGUI/FlatCAMGUI.py:3633
#: flatcamTools/ToolPcbWizard.py:62 flatcamTools/ToolPcbWizard.py:69
msgid "Open"
msgstr "Open"

#: flatcamGUI/FlatCAMGUI.py:93
msgid "Open &Project ..."
msgstr "Open &Project ..."

#: flatcamGUI/FlatCAMGUI.py:99 flatcamGUI/FlatCAMGUI.py:3642
msgid "Open &Gerber ...\tCTRL+G"
msgstr "Open &Gerber ...\tCTRL+G"

#: flatcamGUI/FlatCAMGUI.py:104 flatcamGUI/FlatCAMGUI.py:3647
msgid "Open &Excellon ...\tCTRL+E"
msgstr "Open &Excellon ...\tCTRL+E"

#: flatcamGUI/FlatCAMGUI.py:108 flatcamGUI/FlatCAMGUI.py:3651
msgid "Open G-&Code ..."
msgstr "Open G-&Code ..."

#: flatcamGUI/FlatCAMGUI.py:114
msgid "Open Config ..."
msgstr "Open Config ..."

#: flatcamGUI/FlatCAMGUI.py:118
msgid "Recent projects"
msgstr "Recent projects"

#: flatcamGUI/FlatCAMGUI.py:119
msgid "Recent files"
msgstr "Recent files"

#: flatcamGUI/FlatCAMGUI.py:125
msgid "Scripting"
msgstr "Scripting"

#: flatcamGUI/FlatCAMGUI.py:128 flatcamGUI/FlatCAMGUI.py:714
#: flatcamGUI/FlatCAMGUI.py:2119
msgid "New Script ..."
msgstr "New Script ..."

#: flatcamGUI/FlatCAMGUI.py:129 flatcamGUI/FlatCAMGUI.py:715
#: flatcamGUI/FlatCAMGUI.py:2120
msgid "Open Script ..."
msgstr "Open Script ..."

#: flatcamGUI/FlatCAMGUI.py:131 flatcamGUI/FlatCAMGUI.py:716
#: flatcamGUI/FlatCAMGUI.py:2121 flatcamGUI/FlatCAMGUI.py:3622
msgid "Run Script ..."
msgstr "Run Script ..."

#: flatcamGUI/FlatCAMGUI.py:133 flatcamGUI/FlatCAMGUI.py:3624
msgid ""
"Will run the opened Tcl Script thus\n"
"enabling the automation of certain\n"
"functions of FlatCAM."
msgstr ""
"Will run the opened Tcl Script thus\n"
"enabling the automation of certain\n"
"functions of FlatCAM."

#: flatcamGUI/FlatCAMGUI.py:146
msgid "Import"
msgstr "Import"

#: flatcamGUI/FlatCAMGUI.py:148
msgid "&SVG as Geometry Object ..."
msgstr "&SVG as Geometry Object ..."

#: flatcamGUI/FlatCAMGUI.py:151
msgid "&SVG as Gerber Object ..."
msgstr "&SVG as Gerber Object ..."

#: flatcamGUI/FlatCAMGUI.py:156
msgid "&DXF as Geometry Object ..."
msgstr "&DXF as Geometry Object ..."

#: flatcamGUI/FlatCAMGUI.py:159
msgid "&DXF as Gerber Object ..."
msgstr "&DXF as Gerber Object ..."

#: flatcamGUI/FlatCAMGUI.py:164
msgid "Export"
msgstr "Export"

#: flatcamGUI/FlatCAMGUI.py:167
msgid "Export &SVG ..."
msgstr "Export &SVG ..."

#: flatcamGUI/FlatCAMGUI.py:170
msgid "Export DXF ..."
msgstr "Export DXF ..."

#: flatcamGUI/FlatCAMGUI.py:175
msgid "Export &PNG ..."
msgstr "Export &PNG ..."

#: flatcamGUI/FlatCAMGUI.py:177
msgid ""
"Will export an image in PNG format,\n"
"the saved image will contain the visual \n"
"information currently in FlatCAM Plot Area."
msgstr ""
"Will export an image in PNG format,\n"
"the saved image will contain the visual \n"
"information currently in FlatCAM Plot Area."

#: flatcamGUI/FlatCAMGUI.py:186
msgid "Export &Excellon ..."
msgstr "Export &Excellon ..."

#: flatcamGUI/FlatCAMGUI.py:188
msgid ""
"Will export an Excellon Object as Excellon file,\n"
"the coordinates format, the file units and zeros\n"
"are set in Preferences -> Excellon Export."
msgstr ""
"Will export an Excellon Object as Excellon file,\n"
"the coordinates format, the file units and zeros\n"
"are set in Preferences -> Excellon Export."

#: flatcamGUI/FlatCAMGUI.py:195
msgid "Export &Gerber ..."
msgstr "Export &Gerber ..."

#: flatcamGUI/FlatCAMGUI.py:197
msgid ""
"Will export an Gerber Object as Gerber file,\n"
"the coordinates format, the file units and zeros\n"
"are set in Preferences -> Gerber Export."
msgstr ""
"Will export an Gerber Object as Gerber file,\n"
"the coordinates format, the file units and zeros\n"
"are set in Preferences -> Gerber Export."

#: flatcamGUI/FlatCAMGUI.py:213
msgid "Backup"
msgstr "Backup"

#: flatcamGUI/FlatCAMGUI.py:217
msgid "Import Preferences from file ..."
msgstr "Import Preferences from file ..."

#: flatcamGUI/FlatCAMGUI.py:222
msgid "Export Preferences to file ..."
msgstr "Export Preferences to file ..."

#: flatcamGUI/FlatCAMGUI.py:228 flatcamGUI/FlatCAMGUI.py:587
msgid "Save"
msgstr "Save"

#: flatcamGUI/FlatCAMGUI.py:231
msgid "&Save Project ..."
msgstr "&Save Project ..."

#: flatcamGUI/FlatCAMGUI.py:236
msgid "Save Project &As ...\tCTRL+S"
msgstr "Save Project &As ...\tCTRL+S"

#: flatcamGUI/FlatCAMGUI.py:241
msgid "Save Project C&opy ..."
msgstr "Save Project C&opy ..."

#: flatcamGUI/FlatCAMGUI.py:248
msgid "E&xit"
msgstr "E&xit"

#: flatcamGUI/FlatCAMGUI.py:256 flatcamGUI/FlatCAMGUI.py:584
#: flatcamGUI/FlatCAMGUI.py:1894
msgid "Edit"
msgstr "Edit"

#: flatcamGUI/FlatCAMGUI.py:259
msgid "Edit Object\tE"
msgstr "Edit Object\tE"

#: flatcamGUI/FlatCAMGUI.py:260
msgid "Close Editor\tCTRL+S"
msgstr "Close Editor\tCTRL+S"

#: flatcamGUI/FlatCAMGUI.py:268
msgid "Conversion"
msgstr "Conversion"

#: flatcamGUI/FlatCAMGUI.py:270
msgid "&Join Geo/Gerber/Exc -> Geo"
msgstr "&Join Geo/Gerber/Exc -> Geo"

#: flatcamGUI/FlatCAMGUI.py:272
msgid ""
"Merge a selection of objects, which can be of type:\n"
"- Gerber\n"
"- Excellon\n"
"- Geometry\n"
"into a new combo Geometry object."
msgstr ""
"Merge a selection of objects, which can be of type:\n"
"- Gerber\n"
"- Excellon\n"
"- Geometry\n"
"into a new combo Geometry object."

#: flatcamGUI/FlatCAMGUI.py:279
msgid "Join Excellon(s) -> Excellon"
msgstr "Join Excellon(s) -> Excellon"

#: flatcamGUI/FlatCAMGUI.py:281
msgid "Merge a selection of Excellon objects into a new combo Excellon object."
msgstr ""
"Merge a selection of Excellon objects into a new combo Excellon object."

#: flatcamGUI/FlatCAMGUI.py:284
msgid "Join Gerber(s) -> Gerber"
msgstr "Join Gerber(s) -> Gerber"

#: flatcamGUI/FlatCAMGUI.py:286
msgid "Merge a selection of Gerber objects into a new combo Gerber object."
msgstr "Merge a selection of Gerber objects into a new combo Gerber object."

#: flatcamGUI/FlatCAMGUI.py:291
msgid "Convert Single to MultiGeo"
msgstr "Convert Single to MultiGeo"

#: flatcamGUI/FlatCAMGUI.py:293
msgid ""
"Will convert a Geometry object from single_geometry type\n"
"to a multi_geometry type."
msgstr ""
"Will convert a Geometry object from single_geometry type\n"
"to a multi_geometry type."

#: flatcamGUI/FlatCAMGUI.py:297
msgid "Convert Multi to SingleGeo"
msgstr "Convert Multi to SingleGeo"

#: flatcamGUI/FlatCAMGUI.py:299
msgid ""
"Will convert a Geometry object from multi_geometry type\n"
"to a single_geometry type."
msgstr ""
"Will convert a Geometry object from multi_geometry type\n"
"to a single_geometry type."

#: flatcamGUI/FlatCAMGUI.py:305
msgid "Convert Any to Geo"
msgstr "Convert Any to Geo"

#: flatcamGUI/FlatCAMGUI.py:307
msgid "Convert Any to Gerber"
msgstr "Convert Any to Gerber"

#: flatcamGUI/FlatCAMGUI.py:312
msgid "&Copy\tCTRL+C"
msgstr "&Copy\tCTRL+C"

#: flatcamGUI/FlatCAMGUI.py:316
msgid "&Delete\tDEL"
msgstr "&Delete\tDEL"

#: flatcamGUI/FlatCAMGUI.py:320
msgid "Se&t Origin\tO"
msgstr "Se&t Origin\tO"

#: flatcamGUI/FlatCAMGUI.py:321
msgid "Jump to Location\tJ"
msgstr "Jump to Location\tJ"

#: flatcamGUI/FlatCAMGUI.py:326
msgid "Toggle Units\tQ"
msgstr "Toggle Units\tQ"

#: flatcamGUI/FlatCAMGUI.py:327
msgid "&Select All\tCTRL+A"
msgstr "&Select All\tCTRL+A"

#: flatcamGUI/FlatCAMGUI.py:331
msgid "&Preferences\tSHIFT+P"
msgstr "&Preferences\tSHIFT+P"

#: flatcamGUI/FlatCAMGUI.py:334 flatcamTools/ToolProperties.py:135
msgid "Options"
msgstr "Options"

#: flatcamGUI/FlatCAMGUI.py:349
msgid "&Rotate Selection\tSHIFT+(R)"
msgstr "&Rotate Selection\tSHIFT+(R)"

#: flatcamGUI/FlatCAMGUI.py:354
msgid "&Skew on X axis\tSHIFT+X"
msgstr "&Skew on X axis\tSHIFT+X"

#: flatcamGUI/FlatCAMGUI.py:356
msgid "S&kew on Y axis\tSHIFT+Y"
msgstr "S&kew on Y axis\tSHIFT+Y"

#: flatcamGUI/FlatCAMGUI.py:361
msgid "Flip on &X axis\tX"
msgstr "Flip on &X axis\tX"

#: flatcamGUI/FlatCAMGUI.py:363
msgid "Flip on &Y axis\tY"
msgstr "Flip on &Y axis\tY"

#: flatcamGUI/FlatCAMGUI.py:368
msgid "View source\tALT+S"
msgstr "View source\tALT+S"

#: flatcamGUI/FlatCAMGUI.py:375
msgid "&View"
msgstr "&View"

#: flatcamGUI/FlatCAMGUI.py:376
msgid "Enable all plots\tALT+1"
msgstr "Enable all plots\tALT+1"

#: flatcamGUI/FlatCAMGUI.py:378
msgid "Disable all plots\tALT+2"
msgstr "Disable all plots\tALT+2"

#: flatcamGUI/FlatCAMGUI.py:380
msgid "Disable non-selected\tALT+3"
msgstr "Disable non-selected\tALT+3"

#: flatcamGUI/FlatCAMGUI.py:383
msgid "&Zoom Fit\tV"
msgstr "&Zoom Fit\tV"

#: flatcamGUI/FlatCAMGUI.py:384
msgid "&Zoom In\t="
msgstr "&Zoom In\t="

#: flatcamGUI/FlatCAMGUI.py:385
msgid "&Zoom Out\t-"
msgstr "&Zoom Out\t-"

#: flatcamGUI/FlatCAMGUI.py:389
msgid "Redraw All\tF5"
msgstr "Redraw All\tF5"

#: flatcamGUI/FlatCAMGUI.py:393
msgid "Toggle Code Editor\tCTRL+E"
msgstr "Toggle Code Editor\tCTRL+E"

#: flatcamGUI/FlatCAMGUI.py:396
msgid "&Toggle FullScreen\tALT+F10"
msgstr "&Toggle FullScreen\tALT+F10"

#: flatcamGUI/FlatCAMGUI.py:398
msgid "&Toggle Plot Area\tCTRL+F10"
msgstr "&Toggle Plot Area\tCTRL+F10"

#: flatcamGUI/FlatCAMGUI.py:400
msgid "&Toggle Project/Sel/Tool\t`"
msgstr "&Toggle Project/Sel/Tool\t`"

#: flatcamGUI/FlatCAMGUI.py:403
msgid "&Toggle Grid Snap\tG"
msgstr "&Toggle Grid Snap\tG"

#: flatcamGUI/FlatCAMGUI.py:405
msgid "&Toggle Axis\tSHIFT+G"
msgstr "&Toggle Axis\tSHIFT+G"

#: flatcamGUI/FlatCAMGUI.py:408
msgid "Toggle Workspace\tSHIFT+W"
msgstr "Toggle Workspace\tSHIFT+W"

#: flatcamGUI/FlatCAMGUI.py:413
#| msgid "Object"
msgid "Objects"
msgstr "Objects"

#: flatcamGUI/FlatCAMGUI.py:418
msgid "&Tool"
msgstr "&Tool"

#: flatcamGUI/FlatCAMGUI.py:420
msgid "&Command Line\tS"
msgstr "&Command Line\tS"

#: flatcamGUI/FlatCAMGUI.py:425
msgid "&Help"
msgstr "&Help"

#: flatcamGUI/FlatCAMGUI.py:426
msgid "Online Help\tF1"
msgstr "Online Help\tF1"

#: flatcamGUI/FlatCAMGUI.py:427
msgid "FlatCAM.org"
msgstr "FlatCAM.org"

#: flatcamGUI/FlatCAMGUI.py:429
msgid "Report a bug"
msgstr "Report a bug"

#: flatcamGUI/FlatCAMGUI.py:432
msgid "Excellon Specification"
msgstr "Excellon Specification"

#: flatcamGUI/FlatCAMGUI.py:434
msgid "Gerber Specification"
msgstr "Gerber Specification"

#: flatcamGUI/FlatCAMGUI.py:439
msgid "Shortcuts List\tF3"
msgstr "Shortcuts List\tF3"

#: flatcamGUI/FlatCAMGUI.py:440
msgid "YouTube Channel\tF4"
msgstr "YouTube Channel\tF4"

#: flatcamGUI/FlatCAMGUI.py:451
msgid "Add Circle\tO"
msgstr "Add Circle\tO"

#: flatcamGUI/FlatCAMGUI.py:453
msgid "Add Arc\tA"
msgstr "Add Arc\tA"

#: flatcamGUI/FlatCAMGUI.py:456
msgid "Add Rectangle\tR"
msgstr "Add Rectangle\tR"

#: flatcamGUI/FlatCAMGUI.py:459
msgid "Add Polygon\tN"
msgstr "Add Polygon\tN"

#: flatcamGUI/FlatCAMGUI.py:461
msgid "Add Path\tP"
msgstr "Add Path\tP"

#: flatcamGUI/FlatCAMGUI.py:463
msgid "Add Text\tT"
msgstr "Add Text\tT"

#: flatcamGUI/FlatCAMGUI.py:466
msgid "Polygon Union\tU"
msgstr "Polygon Union\tU"

#: flatcamGUI/FlatCAMGUI.py:468
msgid "Polygon Intersection\tE"
msgstr "Polygon Intersection\tE"

#: flatcamGUI/FlatCAMGUI.py:470
msgid "Polygon Subtraction\tS"
msgstr "Polygon Subtraction\tS"

#: flatcamGUI/FlatCAMGUI.py:474
msgid "Cut Path\tX"
msgstr "Cut Path\tX"

#: flatcamGUI/FlatCAMGUI.py:476
msgid "Copy Geom\tC"
msgstr "Copy Geom\tC"

#: flatcamGUI/FlatCAMGUI.py:478
msgid "Delete Shape\tDEL"
msgstr "Delete Shape\tDEL"

#: flatcamGUI/FlatCAMGUI.py:481 flatcamGUI/FlatCAMGUI.py:563
msgid "Move\tM"
msgstr "Move\tM"

#: flatcamGUI/FlatCAMGUI.py:483
msgid "Buffer Tool\tB"
msgstr "Buffer Tool\tB"

#: flatcamGUI/FlatCAMGUI.py:486
msgid "Paint Tool\tI"
msgstr "Paint Tool\tI"

#: flatcamGUI/FlatCAMGUI.py:489
msgid "Transform Tool\tALT+R"
msgstr "Transform Tool\tALT+R"

#: flatcamGUI/FlatCAMGUI.py:493
msgid "Toggle Corner Snap\tK"
msgstr "Toggle Corner Snap\tK"

#: flatcamGUI/FlatCAMGUI.py:499
msgid ">Excellon Editor<"
msgstr ">Excellon Editor<"

#: flatcamGUI/FlatCAMGUI.py:503
msgid "Add Drill Array\tA"
msgstr "Add Drill Array\tA"

#: flatcamGUI/FlatCAMGUI.py:505
msgid "Add Drill\tD"
msgstr "Add Drill\tD"

#: flatcamGUI/FlatCAMGUI.py:509
msgid "Add Slot Array\tQ"
msgstr "Add Slot Array\tQ"

#: flatcamGUI/FlatCAMGUI.py:511
msgid "Add Slot\tW"
msgstr "Add Slot\tW"

#: flatcamGUI/FlatCAMGUI.py:515
msgid "Resize Drill(S)\tR"
msgstr "Resize Drill(S)\tR"

#: flatcamGUI/FlatCAMGUI.py:517 flatcamGUI/FlatCAMGUI.py:558
msgid "Copy\tC"
msgstr "Copy\tC"

#: flatcamGUI/FlatCAMGUI.py:519 flatcamGUI/FlatCAMGUI.py:560
msgid "Delete\tDEL"
msgstr "Delete\tDEL"

#: flatcamGUI/FlatCAMGUI.py:524
msgid "Move Drill(s)\tM"
msgstr "Move Drill(s)\tM"

#: flatcamGUI/FlatCAMGUI.py:529
msgid ">Gerber Editor<"
msgstr ">Gerber Editor<"

#: flatcamGUI/FlatCAMGUI.py:533
msgid "Add Pad\tP"
msgstr "Add Pad\tP"

#: flatcamGUI/FlatCAMGUI.py:535
msgid "Add Pad Array\tA"
msgstr "Add Pad Array\tA"

#: flatcamGUI/FlatCAMGUI.py:537
msgid "Add Track\tT"
msgstr "Add Track\tT"

#: flatcamGUI/FlatCAMGUI.py:539
msgid "Add Region\tN"
msgstr "Add Region\tN"

#: flatcamGUI/FlatCAMGUI.py:543
msgid "Poligonize\tALT+N"
msgstr "Poligonize\tALT+N"

#: flatcamGUI/FlatCAMGUI.py:545
msgid "Add SemiDisc\tE"
msgstr "Add SemiDisc\tE"

#: flatcamGUI/FlatCAMGUI.py:546
msgid "Add Disc\tD"
msgstr "Add Disc\tD"

#: flatcamGUI/FlatCAMGUI.py:548
msgid "Buffer\tB"
msgstr "Buffer\tB"

#: flatcamGUI/FlatCAMGUI.py:549
msgid "Scale\tS"
msgstr "Scale\tS"

#: flatcamGUI/FlatCAMGUI.py:551
msgid "Mark Area\tALT+A"
msgstr "Mark Area\tALT+A"

#: flatcamGUI/FlatCAMGUI.py:553
msgid "Eraser\tCTRL+E"
msgstr "Eraser\tCTRL+E"

#: flatcamGUI/FlatCAMGUI.py:555
msgid "Transform\tALT+R"
msgstr "Transform\tALT+R"

#: flatcamGUI/FlatCAMGUI.py:578
msgid "Enable Plot"
msgstr "Enable Plot"

#: flatcamGUI/FlatCAMGUI.py:579
msgid "Disable Plot"
msgstr "Disable Plot"

#: flatcamGUI/FlatCAMGUI.py:581
msgid "Generate CNC"
msgstr "Generate CNC"

#: flatcamGUI/FlatCAMGUI.py:582
msgid "View Source"
msgstr "View Source"

#: flatcamGUI/FlatCAMGUI.py:590 flatcamGUI/FlatCAMGUI.py:1900
#: flatcamTools/ToolProperties.py:24
msgid "Properties"
msgstr "Properties"

#: flatcamGUI/FlatCAMGUI.py:619
msgid "File Toolbar"
msgstr "File Toolbar"

#: flatcamGUI/FlatCAMGUI.py:623
msgid "Edit Toolbar"
msgstr "Edit Toolbar"

#: flatcamGUI/FlatCAMGUI.py:627
msgid "View Toolbar"
msgstr "View Toolbar"

#: flatcamGUI/FlatCAMGUI.py:631
msgid "Shell Toolbar"
msgstr "Shell Toolbar"

#: flatcamGUI/FlatCAMGUI.py:635
msgid "Tools Toolbar"
msgstr "Tools Toolbar"

#: flatcamGUI/FlatCAMGUI.py:639
msgid "Excellon Editor Toolbar"
msgstr "Excellon Editor Toolbar"

#: flatcamGUI/FlatCAMGUI.py:645
msgid "Geometry Editor Toolbar"
msgstr "Geometry Editor Toolbar"

#: flatcamGUI/FlatCAMGUI.py:649
msgid "Gerber Editor Toolbar"
msgstr "Gerber Editor Toolbar"

#: flatcamGUI/FlatCAMGUI.py:653
msgid "Grid Toolbar"
msgstr "Grid Toolbar"

#: flatcamGUI/FlatCAMGUI.py:674 flatcamGUI/FlatCAMGUI.py:2087
msgid "Open project"
msgstr "Open project"

#: flatcamGUI/FlatCAMGUI.py:675 flatcamGUI/FlatCAMGUI.py:2088
msgid "Save project"
msgstr "Save project"

#: flatcamGUI/FlatCAMGUI.py:680 flatcamGUI/FlatCAMGUI.py:2091
msgid "New Blank Geometry"
msgstr "New Blank Geometry"

#: flatcamGUI/FlatCAMGUI.py:681
msgid "New Blank Gerber"
msgstr "New Blank Gerber"

#: flatcamGUI/FlatCAMGUI.py:682 flatcamGUI/FlatCAMGUI.py:2092
msgid "New Blank Excellon"
msgstr "New Blank Excellon"

#: flatcamGUI/FlatCAMGUI.py:686 flatcamGUI/FlatCAMGUI.py:2096
msgid "Save Object and close the Editor"
msgstr "Save Object and close the Editor"

#: flatcamGUI/FlatCAMGUI.py:690 flatcamGUI/FlatCAMGUI.py:2100
msgid "&Delete"
msgstr "&Delete"

#: flatcamGUI/FlatCAMGUI.py:692 flatcamGUI/FlatCAMGUI.py:1403
#: flatcamGUI/FlatCAMGUI.py:1591 flatcamGUI/FlatCAMGUI.py:2102
#: flatcamTools/ToolDistance.py:26 flatcamTools/ToolDistance.py:156
#| msgid "Panel Tool"
msgid "Distance Tool"
msgstr "Distance Tool"

#: flatcamGUI/FlatCAMGUI.py:694 flatcamGUI/FlatCAMGUI.py:2104
msgid "Distance Min Tool"
msgstr "Distance Min Tool"

#: flatcamGUI/FlatCAMGUI.py:695 flatcamGUI/FlatCAMGUI.py:1399
#: flatcamGUI/FlatCAMGUI.py:2105
msgid "Set Origin"
msgstr "Set Origin"

#: flatcamGUI/FlatCAMGUI.py:696 flatcamGUI/FlatCAMGUI.py:2106
#| msgid "Jump to Location\tJ"
msgid "Jump to Location"
msgstr "Jump to Location"

#: flatcamGUI/FlatCAMGUI.py:702 flatcamGUI/FlatCAMGUI.py:2109
msgid "&Replot"
msgstr "&Replot"

#: flatcamGUI/FlatCAMGUI.py:703 flatcamGUI/FlatCAMGUI.py:2110
msgid "&Clear plot"
msgstr "&Clear plot"

#: flatcamGUI/FlatCAMGUI.py:704 flatcamGUI/FlatCAMGUI.py:1402
#: flatcamGUI/FlatCAMGUI.py:2111
msgid "Zoom In"
msgstr "Zoom In"

#: flatcamGUI/FlatCAMGUI.py:705 flatcamGUI/FlatCAMGUI.py:1402
#: flatcamGUI/FlatCAMGUI.py:2112
msgid "Zoom Out"
msgstr "Zoom Out"

#: flatcamGUI/FlatCAMGUI.py:706 flatcamGUI/FlatCAMGUI.py:1401
#: flatcamGUI/FlatCAMGUI.py:1831 flatcamGUI/FlatCAMGUI.py:2113
msgid "Zoom Fit"
msgstr "Zoom Fit"

#: flatcamGUI/FlatCAMGUI.py:713 flatcamGUI/FlatCAMGUI.py:2118
msgid "&Command Line"
msgstr "&Command Line"

#: flatcamGUI/FlatCAMGUI.py:721 flatcamGUI/FlatCAMGUI.py:2124
msgid "2Sided Tool"
msgstr "2Sided Tool"

#: flatcamGUI/FlatCAMGUI.py:722 flatcamGUI/ObjectUI.py:528
#: flatcamTools/ToolCutOut.py:355
msgid "Cutout Tool"
msgstr "Cutout Tool"

#: flatcamGUI/FlatCAMGUI.py:723 flatcamGUI/FlatCAMGUI.py:2126
#: flatcamGUI/ObjectUI.py:512 flatcamTools/ToolNonCopperClear.py:590
msgid "NCC Tool"
msgstr "NCC Tool"

#: flatcamGUI/FlatCAMGUI.py:727 flatcamGUI/FlatCAMGUI.py:2130
msgid "Panel Tool"
msgstr "Panel Tool"

#: flatcamGUI/FlatCAMGUI.py:728 flatcamGUI/FlatCAMGUI.py:2131
#: flatcamTools/ToolFilm.py:291
msgid "Film Tool"
msgstr "Film Tool"

#: flatcamGUI/FlatCAMGUI.py:729 flatcamGUI/FlatCAMGUI.py:2133
#: flatcamTools/ToolSolderPaste.py:458
msgid "SolderPaste Tool"
msgstr "SolderPaste Tool"

#: flatcamGUI/FlatCAMGUI.py:730 flatcamGUI/FlatCAMGUI.py:2134
#: flatcamTools/ToolSub.py:28
msgid "Substract Tool"
msgstr "Substract Tool"

#: flatcamGUI/FlatCAMGUI.py:731 flatcamTools/ToolRulesCheck.py:540
#| msgid "Scale Tool"
msgid "Rules Tool"
msgstr "Rules Tool"

#: flatcamGUI/FlatCAMGUI.py:732 flatcamGUI/FlatCAMGUI.py:1409
#: flatcamTools/ToolOptimal.py:27 flatcamTools/ToolOptimal.py:271
#| msgid "Film Tool"
msgid "Optimal Tool"
msgstr "Optimal Tool"

#: flatcamGUI/FlatCAMGUI.py:736 flatcamGUI/FlatCAMGUI.py:1407
#: flatcamGUI/FlatCAMGUI.py:2139
msgid "Calculators Tool"
msgstr "Calculators Tool"

#: flatcamGUI/FlatCAMGUI.py:742 flatcamGUI/FlatCAMGUI.py:761
#: flatcamGUI/FlatCAMGUI.py:799 flatcamGUI/FlatCAMGUI.py:2143
#: flatcamGUI/FlatCAMGUI.py:2198
msgid "Select"
msgstr "Select"

#: flatcamGUI/FlatCAMGUI.py:743 flatcamGUI/FlatCAMGUI.py:2144
msgid "Add Drill Hole"
msgstr "Add Drill Hole"

#: flatcamGUI/FlatCAMGUI.py:745 flatcamGUI/FlatCAMGUI.py:2146
msgid "Add Drill Hole Array"
msgstr "Add Drill Hole Array"

#: flatcamGUI/FlatCAMGUI.py:746 flatcamGUI/FlatCAMGUI.py:1676
#: flatcamGUI/FlatCAMGUI.py:1886 flatcamGUI/FlatCAMGUI.py:2148
msgid "Add Slot"
msgstr "Add Slot"

#: flatcamGUI/FlatCAMGUI.py:748 flatcamGUI/FlatCAMGUI.py:1675
#: flatcamGUI/FlatCAMGUI.py:1887 flatcamGUI/FlatCAMGUI.py:2150
msgid "Add Slot Array"
msgstr "Add Slot Array"

#: flatcamGUI/FlatCAMGUI.py:749 flatcamGUI/FlatCAMGUI.py:1889
#: flatcamGUI/FlatCAMGUI.py:2147
msgid "Resize Drill"
msgstr "Resize Drill"

#: flatcamGUI/FlatCAMGUI.py:752 flatcamGUI/FlatCAMGUI.py:2153
msgid "Copy Drill"
msgstr "Copy Drill"

#: flatcamGUI/FlatCAMGUI.py:753 flatcamGUI/FlatCAMGUI.py:2155
msgid "Delete Drill"
msgstr "Delete Drill"

#: flatcamGUI/FlatCAMGUI.py:756 flatcamGUI/FlatCAMGUI.py:2158
msgid "Move Drill"
msgstr "Move Drill"

#: flatcamGUI/FlatCAMGUI.py:762 flatcamGUI/FlatCAMGUI.py:2162
msgid "Add Circle"
msgstr "Add Circle"

#: flatcamGUI/FlatCAMGUI.py:763 flatcamGUI/FlatCAMGUI.py:2163
msgid "Add Arc"
msgstr "Add Arc"

#: flatcamGUI/FlatCAMGUI.py:765 flatcamGUI/FlatCAMGUI.py:2165
msgid "Add Rectangle"
msgstr "Add Rectangle"

#: flatcamGUI/FlatCAMGUI.py:768 flatcamGUI/FlatCAMGUI.py:2168
msgid "Add Path"
msgstr "Add Path"

#: flatcamGUI/FlatCAMGUI.py:769 flatcamGUI/FlatCAMGUI.py:2170
msgid "Add Polygon"
msgstr "Add Polygon"

#: flatcamGUI/FlatCAMGUI.py:771 flatcamGUI/FlatCAMGUI.py:2172
msgid "Add Text"
msgstr "Add Text"

#: flatcamGUI/FlatCAMGUI.py:772 flatcamGUI/FlatCAMGUI.py:2173
msgid "Add Buffer"
msgstr "Add Buffer"

#: flatcamGUI/FlatCAMGUI.py:773 flatcamGUI/FlatCAMGUI.py:2174
msgid "Paint Shape"
msgstr "Paint Shape"

#: flatcamGUI/FlatCAMGUI.py:774 flatcamGUI/FlatCAMGUI.py:816
#: flatcamGUI/FlatCAMGUI.py:1848 flatcamGUI/FlatCAMGUI.py:1876
#: flatcamGUI/FlatCAMGUI.py:2175 flatcamGUI/FlatCAMGUI.py:2214
msgid "Eraser"
msgstr "Eraser"

#: flatcamGUI/FlatCAMGUI.py:777 flatcamGUI/FlatCAMGUI.py:2178
msgid "Polygon Union"
msgstr "Polygon Union"

#: flatcamGUI/FlatCAMGUI.py:778 flatcamGUI/FlatCAMGUI.py:2179
#| msgid "Polygon Union"
msgid "Polygon Explode"
msgstr "Polygon Explode"

#: flatcamGUI/FlatCAMGUI.py:781 flatcamGUI/FlatCAMGUI.py:2182
msgid "Polygon Intersection"
msgstr "Polygon Intersection"

#: flatcamGUI/FlatCAMGUI.py:783 flatcamGUI/FlatCAMGUI.py:2184
msgid "Polygon Subtraction"
msgstr "Polygon Subtraction"

#: flatcamGUI/FlatCAMGUI.py:786 flatcamGUI/FlatCAMGUI.py:2187
msgid "Cut Path"
msgstr "Cut Path"

#: flatcamGUI/FlatCAMGUI.py:787
msgid "Copy Shape(s)"
msgstr "Copy Shape(s)"

#: flatcamGUI/FlatCAMGUI.py:790
msgid "Delete Shape '-'"
msgstr "Delete Shape '-'"

#: flatcamGUI/FlatCAMGUI.py:792 flatcamGUI/FlatCAMGUI.py:823
#: flatcamGUI/FlatCAMGUI.py:1855 flatcamGUI/FlatCAMGUI.py:1880
#: flatcamGUI/FlatCAMGUI.py:2192 flatcamGUI/FlatCAMGUI.py:2221
msgid "Transformations"
msgstr "Transformations"

#: flatcamGUI/FlatCAMGUI.py:794
msgid "Move Objects "
msgstr "Move Objects "

#: flatcamGUI/FlatCAMGUI.py:800 flatcamGUI/FlatCAMGUI.py:1795
#: flatcamGUI/FlatCAMGUI.py:2199
msgid "Add Pad"
msgstr "Add Pad"

#: flatcamGUI/FlatCAMGUI.py:802 flatcamGUI/FlatCAMGUI.py:1796
#: flatcamGUI/FlatCAMGUI.py:2201
msgid "Add Track"
msgstr "Add Track"

#: flatcamGUI/FlatCAMGUI.py:803 flatcamGUI/FlatCAMGUI.py:1795
#: flatcamGUI/FlatCAMGUI.py:2202
msgid "Add Region"
msgstr "Add Region"

#: flatcamGUI/FlatCAMGUI.py:805 flatcamGUI/FlatCAMGUI.py:1868
#: flatcamGUI/FlatCAMGUI.py:2204
msgid "Poligonize"
msgstr "Poligonize"

#: flatcamGUI/FlatCAMGUI.py:807 flatcamGUI/FlatCAMGUI.py:1869
#: flatcamGUI/FlatCAMGUI.py:2206
msgid "SemiDisc"
msgstr "SemiDisc"

#: flatcamGUI/FlatCAMGUI.py:808 flatcamGUI/FlatCAMGUI.py:1870
#: flatcamGUI/FlatCAMGUI.py:2207
msgid "Disc"
msgstr "Disc"

#: flatcamGUI/FlatCAMGUI.py:814 flatcamGUI/FlatCAMGUI.py:1875
#: flatcamGUI/FlatCAMGUI.py:2213
msgid "Mark Area"
msgstr "Mark Area"

#: flatcamGUI/FlatCAMGUI.py:825 flatcamGUI/FlatCAMGUI.py:1795
#: flatcamGUI/FlatCAMGUI.py:1858 flatcamGUI/FlatCAMGUI.py:1899
#: flatcamGUI/FlatCAMGUI.py:2223 flatcamTools/ToolMove.py:26
msgid "Move"
msgstr "Move"

#: flatcamGUI/FlatCAMGUI.py:832 flatcamGUI/FlatCAMGUI.py:2229
msgid "Snap to grid"
msgstr "Snap to grid"

#: flatcamGUI/FlatCAMGUI.py:835 flatcamGUI/FlatCAMGUI.py:2232
msgid "Grid X snapping distance"
msgstr "Grid X snapping distance"

#: flatcamGUI/FlatCAMGUI.py:840 flatcamGUI/FlatCAMGUI.py:2237
msgid "Grid Y snapping distance"
msgstr "Grid Y snapping distance"

#: flatcamGUI/FlatCAMGUI.py:846 flatcamGUI/FlatCAMGUI.py:2243
msgid ""
"When active, value on Grid_X\n"
"is copied to the Grid_Y value."
msgstr ""
"When active, value on Grid_X\n"
"is copied to the Grid_Y value."

#: flatcamGUI/FlatCAMGUI.py:852 flatcamGUI/FlatCAMGUI.py:2249
msgid "Snap to corner"
msgstr "Snap to corner"

#: flatcamGUI/FlatCAMGUI.py:856 flatcamGUI/FlatCAMGUI.py:2253
#: flatcamGUI/PreferencesUI.py:278
msgid "Max. magnet distance"
msgstr "Max. magnet distance"

#: flatcamGUI/FlatCAMGUI.py:878 flatcamGUI/FlatCAMGUI.py:1825
msgid "Project"
msgstr "Project"

#: flatcamGUI/FlatCAMGUI.py:890
msgid "Selected"
msgstr "Selected"

#: flatcamGUI/FlatCAMGUI.py:917 flatcamGUI/FlatCAMGUI.py:925
msgid "Plot Area"
msgstr "Plot Area"

#: flatcamGUI/FlatCAMGUI.py:951
msgid "General"
msgstr "General"

#: flatcamGUI/FlatCAMGUI.py:960
msgid "APP.  DEFAULTS"
msgstr "APP.  DEFAULTS"

#: flatcamGUI/FlatCAMGUI.py:961
msgid "PROJ. OPTIONS "
msgstr "PROJ. OPTIONS "

#: flatcamGUI/FlatCAMGUI.py:973 flatcamTools/ToolDblSided.py:48
#: flatcamTools/ToolOptimal.py:64
msgid "GERBER"
msgstr "GERBER"

#: flatcamGUI/FlatCAMGUI.py:983 flatcamTools/ToolDblSided.py:72
msgid "EXCELLON"
msgstr "EXCELLON"

#: flatcamGUI/FlatCAMGUI.py:993 flatcamTools/ToolDblSided.py:96
msgid "GEOMETRY"
msgstr "GEOMETRY"

#: flatcamGUI/FlatCAMGUI.py:1003
msgid "CNC-JOB"
msgstr "CNC-JOB"

#: flatcamGUI/FlatCAMGUI.py:1012 flatcamGUI/ObjectUI.py:501
msgid "TOOLS"
msgstr "TOOLS"

#: flatcamGUI/FlatCAMGUI.py:1022
msgid "UTILITIES"
msgstr "UTILITIES"

#: flatcamGUI/FlatCAMGUI.py:1039
msgid "Import Preferences"
msgstr "Import Preferences"

#: flatcamGUI/FlatCAMGUI.py:1042
msgid ""
"Import a full set of FlatCAM settings from a file\n"
"previously saved on HDD.\n"
"\n"
"FlatCAM automatically save a 'factory_defaults' file\n"
"on the first start. Do not delete that file."
msgstr ""
"Import a full set of FlatCAM settings from a file\n"
"previously saved on HDD.\n"
"\n"
"FlatCAM automatically save a 'factory_defaults' file\n"
"on the first start. Do not delete that file."

#: flatcamGUI/FlatCAMGUI.py:1049
msgid "Export Preferences"
msgstr "Export Preferences"

#: flatcamGUI/FlatCAMGUI.py:1052
msgid ""
"Export a full set of FlatCAM settings in a file\n"
"that is saved on HDD."
msgstr ""
"Export a full set of FlatCAM settings in a file\n"
"that is saved on HDD."

#: flatcamGUI/FlatCAMGUI.py:1057
msgid "Open Pref Folder"
msgstr "Open Pref Folder"

#: flatcamGUI/FlatCAMGUI.py:1060
msgid "Open the folder where FlatCAM save the preferences files."
msgstr "Open the folder where FlatCAM save the preferences files."

#: flatcamGUI/FlatCAMGUI.py:1071
msgid ""
"Save the current settings in the 'current_defaults' file\n"
"which is the file storing the working default preferences."
msgstr ""
"Save the current settings in the 'current_defaults' file\n"
"which is the file storing the working default preferences."

#: flatcamGUI/FlatCAMGUI.py:1396
msgid "SHOW SHORTCUT LIST"
msgstr "SHOW SHORTCUT LIST"

#: flatcamGUI/FlatCAMGUI.py:1396
msgid "Switch to Project Tab"
msgstr "Switch to Project Tab"

#: flatcamGUI/FlatCAMGUI.py:1396
msgid "Switch to Selected Tab"
msgstr "Switch to Selected Tab"

#: flatcamGUI/FlatCAMGUI.py:1397
msgid "Switch to Tool Tab"
msgstr "Switch to Tool Tab"

#: flatcamGUI/FlatCAMGUI.py:1398
msgid "New Gerber"
msgstr "New Gerber"

#: flatcamGUI/FlatCAMGUI.py:1398
msgid "Edit Object (if selected)"
msgstr "Edit Object (if selected)"

#: flatcamGUI/FlatCAMGUI.py:1398
msgid "Jump to Coordinates"
msgstr "Jump to Coordinates"

#: flatcamGUI/FlatCAMGUI.py:1399
msgid "New Excellon"
msgstr "New Excellon"

#: flatcamGUI/FlatCAMGUI.py:1399
msgid "Move Obj"
msgstr "Move Obj"

#: flatcamGUI/FlatCAMGUI.py:1399
msgid "New Geometry"
msgstr "New Geometry"

#: flatcamGUI/FlatCAMGUI.py:1399
msgid "Change Units"
msgstr "Change Units"

#: flatcamGUI/FlatCAMGUI.py:1400
msgid "Open Properties Tool"
msgstr "Open Properties Tool"

#: flatcamGUI/FlatCAMGUI.py:1400
msgid "Rotate by 90 degree CW"
msgstr "Rotate by 90 degree CW"

#: flatcamGUI/FlatCAMGUI.py:1400
msgid "Shell Toggle"
msgstr "Shell Toggle"

#: flatcamGUI/FlatCAMGUI.py:1401
msgid ""
"Add a Tool (when in Geometry Selected Tab or in Tools NCC or Tools Paint)"
msgstr ""
"Add a Tool (when in Geometry Selected Tab or in Tools NCC or Tools Paint)"

#: flatcamGUI/FlatCAMGUI.py:1402
msgid "Flip on X_axis"
msgstr "Flip on X_axis"

#: flatcamGUI/FlatCAMGUI.py:1402
msgid "Flip on Y_axis"
msgstr "Flip on Y_axis"

#: flatcamGUI/FlatCAMGUI.py:1402
msgid "Select All"
msgstr "Select All"

#: flatcamGUI/FlatCAMGUI.py:1402
msgid "Copy Obj"
msgstr "Copy Obj"

#: flatcamGUI/FlatCAMGUI.py:1403
msgid "Open Excellon File"
msgstr "Open Excellon File"

#: flatcamGUI/FlatCAMGUI.py:1403
msgid "Open Gerber File"
msgstr "Open Gerber File"

#: flatcamGUI/FlatCAMGUI.py:1403
msgid "New Project"
msgstr "New Project"

#: flatcamGUI/FlatCAMGUI.py:1404
msgid "Save Project As"
msgstr "Save Project As"

#: flatcamGUI/FlatCAMGUI.py:1404
msgid "Toggle Plot Area"
msgstr "Toggle Plot Area"

#: flatcamGUI/FlatCAMGUI.py:1404
msgid "Copy Obj_Name"
msgstr "Copy Obj_Name"

#: flatcamGUI/FlatCAMGUI.py:1405
msgid "Toggle Code Editor"
msgstr "Toggle Code Editor"

#: flatcamGUI/FlatCAMGUI.py:1405
msgid "Toggle the axis"
msgstr "Toggle the axis"

#: flatcamGUI/FlatCAMGUI.py:1405 flatcamGUI/FlatCAMGUI.py:1589
#: flatcamGUI/FlatCAMGUI.py:1676 flatcamGUI/FlatCAMGUI.py:1798
msgid "Distance Minimum Tool"
msgstr "Distance Minimum Tool"

#: flatcamGUI/FlatCAMGUI.py:1405
msgid "Open Preferences Window"
msgstr "Open Preferences Window"

#: flatcamGUI/FlatCAMGUI.py:1406
msgid "Rotate by 90 degree CCW"
msgstr "Rotate by 90 degree CCW"

#: flatcamGUI/FlatCAMGUI.py:1406
msgid "Run a Script"
msgstr "Run a Script"

#: flatcamGUI/FlatCAMGUI.py:1406
msgid "Toggle the workspace"
msgstr "Toggle the workspace"

#: flatcamGUI/FlatCAMGUI.py:1406
msgid "Skew on X axis"
msgstr "Skew on X axis"

#: flatcamGUI/FlatCAMGUI.py:1407
msgid "Skew on Y axis"
msgstr "Skew on Y axis"

#: flatcamGUI/FlatCAMGUI.py:1407
msgid "2-Sided PCB Tool"
msgstr "2-Sided PCB Tool"

#: flatcamGUI/FlatCAMGUI.py:1407
msgid "Transformations Tool"
msgstr "Transformations Tool"

#: flatcamGUI/FlatCAMGUI.py:1408
msgid "Solder Paste Dispensing Tool"
msgstr "Solder Paste Dispensing Tool"

#: flatcamGUI/FlatCAMGUI.py:1409
msgid "Film PCB Tool"
msgstr "Film PCB Tool"

#: flatcamGUI/FlatCAMGUI.py:1409
msgid "Non-Copper Clearing Tool"
msgstr "Non-Copper Clearing Tool"

#: flatcamGUI/FlatCAMGUI.py:1410
msgid "Paint Area Tool"
msgstr "Paint Area Tool"

#: flatcamGUI/FlatCAMGUI.py:1410 flatcamTools/ToolPDF.py:38
msgid "PDF Import Tool"
msgstr "PDF Import Tool"

#: flatcamGUI/FlatCAMGUI.py:1410
msgid "Rules Check Tool"
msgstr "Rules Check Tool"

#: flatcamGUI/FlatCAMGUI.py:1411
msgid "View File Source"
msgstr "View File Source"

#: flatcamGUI/FlatCAMGUI.py:1412
msgid "Cutout PCB Tool"
msgstr "Cutout PCB Tool"

#: flatcamGUI/FlatCAMGUI.py:1412
msgid "Enable all Plots"
msgstr "Enable all Plots"

#: flatcamGUI/FlatCAMGUI.py:1412
msgid "Disable all Plots"
msgstr "Disable all Plots"

#: flatcamGUI/FlatCAMGUI.py:1412
msgid "Disable Non-selected Plots"
msgstr "Disable Non-selected Plots"

#: flatcamGUI/FlatCAMGUI.py:1413
msgid "Toggle Full Screen"
msgstr "Toggle Full Screen"

#: flatcamGUI/FlatCAMGUI.py:1413
msgid "Abort current task (gracefully)"
msgstr "Abort current task (gracefully)"

#: flatcamGUI/FlatCAMGUI.py:1413
msgid "Open Online Manual"
msgstr "Open Online Manual"

#: flatcamGUI/FlatCAMGUI.py:1414
msgid "Open Online Tutorials"
msgstr "Open Online Tutorials"

#: flatcamGUI/FlatCAMGUI.py:1414
msgid "Refresh Plots"
msgstr "Refresh Plots"

#: flatcamGUI/FlatCAMGUI.py:1414 flatcamTools/ToolSolderPaste.py:415
msgid "Delete Object"
msgstr "Delete Object"

#: flatcamGUI/FlatCAMGUI.py:1414
msgid "Alternate: Delete Tool"
msgstr "Alternate: Delete Tool"

#: flatcamGUI/FlatCAMGUI.py:1415
msgid "(left to Key_1)Toogle Notebook Area (Left Side)"
msgstr "(left to Key_1)Toogle Notebook Area (Left Side)"

#: flatcamGUI/FlatCAMGUI.py:1415
msgid "En(Dis)able Obj Plot"
msgstr "En(Dis)able Obj Plot"

#: flatcamGUI/FlatCAMGUI.py:1416
msgid "Deselects all objects"
msgstr "Deselects all objects"

#: flatcamGUI/FlatCAMGUI.py:1430
msgid "Editor Shortcut list"
msgstr "Editor Shortcut list"

#: flatcamGUI/FlatCAMGUI.py:1584
msgid "GEOMETRY EDITOR"
msgstr "GEOMETRY EDITOR"

#: flatcamGUI/FlatCAMGUI.py:1584
msgid "Draw an Arc"
msgstr "Draw an Arc"

#: flatcamGUI/FlatCAMGUI.py:1584
msgid "Copy Geo Item"
msgstr "Copy Geo Item"

#: flatcamGUI/FlatCAMGUI.py:1585
msgid "Within Add Arc will toogle the ARC direction: CW or CCW"
msgstr "Within Add Arc will toogle the ARC direction: CW or CCW"

#: flatcamGUI/FlatCAMGUI.py:1585
msgid "Polygon Intersection Tool"
msgstr "Polygon Intersection Tool"

#: flatcamGUI/FlatCAMGUI.py:1586
msgid "Geo Paint Tool"
msgstr "Geo Paint Tool"

#: flatcamGUI/FlatCAMGUI.py:1586 flatcamGUI/FlatCAMGUI.py:1675
#: flatcamGUI/FlatCAMGUI.py:1795
msgid "Jump to Location (x, y)"
msgstr "Jump to Location (x, y)"

#: flatcamGUI/FlatCAMGUI.py:1586
msgid "Toggle Corner Snap"
msgstr "Toggle Corner Snap"

#: flatcamGUI/FlatCAMGUI.py:1586
msgid "Move Geo Item"
msgstr "Move Geo Item"

#: flatcamGUI/FlatCAMGUI.py:1587
msgid "Within Add Arc will cycle through the ARC modes"
msgstr "Within Add Arc will cycle through the ARC modes"

#: flatcamGUI/FlatCAMGUI.py:1587
msgid "Draw a Polygon"
msgstr "Draw a Polygon"

#: flatcamGUI/FlatCAMGUI.py:1587
msgid "Draw a Circle"
msgstr "Draw a Circle"

#: flatcamGUI/FlatCAMGUI.py:1588
msgid "Draw a Path"
msgstr "Draw a Path"

#: flatcamGUI/FlatCAMGUI.py:1588
msgid "Draw Rectangle"
msgstr "Draw Rectangle"

#: flatcamGUI/FlatCAMGUI.py:1588
msgid "Polygon Subtraction Tool"
msgstr "Polygon Subtraction Tool"

#: flatcamGUI/FlatCAMGUI.py:1588
msgid "Add Text Tool"
msgstr "Add Text Tool"

#: flatcamGUI/FlatCAMGUI.py:1589
msgid "Polygon Union Tool"
msgstr "Polygon Union Tool"

#: flatcamGUI/FlatCAMGUI.py:1589
msgid "Flip shape on X axis"
msgstr "Flip shape on X axis"

#: flatcamGUI/FlatCAMGUI.py:1589
msgid "Flip shape on Y axis"
msgstr "Flip shape on Y axis"

#: flatcamGUI/FlatCAMGUI.py:1590
msgid "Skew shape on X axis"
msgstr "Skew shape on X axis"

#: flatcamGUI/FlatCAMGUI.py:1590
msgid "Skew shape on Y axis"
msgstr "Skew shape on Y axis"

#: flatcamGUI/FlatCAMGUI.py:1590
msgid "Editor Transformation Tool"
msgstr "Editor Transformation Tool"

#: flatcamGUI/FlatCAMGUI.py:1591
msgid "Offset shape on X axis"
msgstr "Offset shape on X axis"

#: flatcamGUI/FlatCAMGUI.py:1591
msgid "Offset shape on Y axis"
msgstr "Offset shape on Y axis"

#: flatcamGUI/FlatCAMGUI.py:1592 flatcamGUI/FlatCAMGUI.py:1678
#: flatcamGUI/FlatCAMGUI.py:1800
msgid "Save Object and Exit Editor"
msgstr "Save Object and Exit Editor"

#: flatcamGUI/FlatCAMGUI.py:1592
msgid "Polygon Cut Tool"
msgstr "Polygon Cut Tool"

#: flatcamGUI/FlatCAMGUI.py:1593
msgid "Rotate Geometry"
msgstr "Rotate Geometry"

#: flatcamGUI/FlatCAMGUI.py:1593
msgid "Finish drawing for certain tools"
msgstr "Finish drawing for certain tools"

#: flatcamGUI/FlatCAMGUI.py:1593 flatcamGUI/FlatCAMGUI.py:1678
#: flatcamGUI/FlatCAMGUI.py:1798
msgid "Abort and return to Select"
msgstr "Abort and return to Select"

#: flatcamGUI/FlatCAMGUI.py:1594 flatcamGUI/FlatCAMGUI.py:2190
msgid "Delete Shape"
msgstr "Delete Shape"

#: flatcamGUI/FlatCAMGUI.py:1674
msgid "EXCELLON EDITOR"
msgstr "EXCELLON EDITOR"

#: flatcamGUI/FlatCAMGUI.py:1674
msgid "Copy Drill(s)"
msgstr "Copy Drill(s)"

#: flatcamGUI/FlatCAMGUI.py:1674 flatcamGUI/FlatCAMGUI.py:1883
msgid "Add Drill"
msgstr "Add Drill"

#: flatcamGUI/FlatCAMGUI.py:1675
msgid "Move Drill(s)"
msgstr "Move Drill(s)"

#: flatcamGUI/FlatCAMGUI.py:1676
msgid "Add a new Tool"
msgstr "Add a new Tool"

#: flatcamGUI/FlatCAMGUI.py:1677
msgid "Delete Drill(s)"
msgstr "Delete Drill(s)"

#: flatcamGUI/FlatCAMGUI.py:1677
msgid "Alternate: Delete Tool(s)"
msgstr "Alternate: Delete Tool(s)"

#: flatcamGUI/FlatCAMGUI.py:1794
msgid "GERBER EDITOR"
msgstr "GERBER EDITOR"

#: flatcamGUI/FlatCAMGUI.py:1794
msgid "Add Disc"
msgstr "Add Disc"

#: flatcamGUI/FlatCAMGUI.py:1794
msgid "Add SemiDisc"
msgstr "Add SemiDisc"

#: flatcamGUI/FlatCAMGUI.py:1796
msgid "Within Track & Region Tools will cycle in REVERSE the bend modes"
msgstr "Within Track & Region Tools will cycle in REVERSE the bend modes"

#: flatcamGUI/FlatCAMGUI.py:1797
msgid "Within Track & Region Tools will cycle FORWARD the bend modes"
msgstr "Within Track & Region Tools will cycle FORWARD the bend modes"

#: flatcamGUI/FlatCAMGUI.py:1798
msgid "Alternate: Delete Apertures"
msgstr "Alternate: Delete Apertures"

#: flatcamGUI/FlatCAMGUI.py:1799
msgid "Eraser Tool"
msgstr "Eraser Tool"

#: flatcamGUI/FlatCAMGUI.py:1800 flatcamGUI/PreferencesUI.py:1756
msgid "Mark Area Tool"
msgstr "Mark Area Tool"

#: flatcamGUI/FlatCAMGUI.py:1800
msgid "Poligonize Tool"
msgstr "Poligonize Tool"

#: flatcamGUI/FlatCAMGUI.py:1800
msgid "Transformation Tool"
msgstr "Transformation Tool"

#: flatcamGUI/FlatCAMGUI.py:1816
msgid "Toggle Visibility"
msgstr "Toggle Visibility"

#: flatcamGUI/FlatCAMGUI.py:1817
msgid "Toggle Panel"
msgstr "Toggle Panel"

#: flatcamGUI/FlatCAMGUI.py:1820
msgid "New"
msgstr "New"

#: flatcamGUI/FlatCAMGUI.py:1821
msgid "Geometry"
msgstr "Geometry"

#: flatcamGUI/FlatCAMGUI.py:1823 flatcamTools/ToolFilm.py:201
msgid "Excellon"
msgstr "Excellon"

#: flatcamGUI/FlatCAMGUI.py:1828
msgid "Grids"
msgstr "Grids"

#: flatcamGUI/FlatCAMGUI.py:1830
msgid "View"
msgstr "View"

#: flatcamGUI/FlatCAMGUI.py:1832
msgid "Clear Plot"
msgstr "Clear Plot"

#: flatcamGUI/FlatCAMGUI.py:1833
msgid "Replot"
msgstr "Replot"

#: flatcamGUI/FlatCAMGUI.py:1836
msgid "Geo Editor"
msgstr "Geo Editor"

#: flatcamGUI/FlatCAMGUI.py:1837
msgid "Path"
msgstr "Path"

#: flatcamGUI/FlatCAMGUI.py:1838
msgid "Rectangle"
msgstr "Rectangle"

#: flatcamGUI/FlatCAMGUI.py:1840
msgid "Circle"
msgstr "Circle"

#: flatcamGUI/FlatCAMGUI.py:1841
msgid "Polygon"
msgstr "Polygon"

#: flatcamGUI/FlatCAMGUI.py:1842
msgid "Arc"
msgstr "Arc"

#: flatcamGUI/FlatCAMGUI.py:1851
msgid "Union"
msgstr "Union"

#: flatcamGUI/FlatCAMGUI.py:1852
msgid "Intersection"
msgstr "Intersection"

#: flatcamGUI/FlatCAMGUI.py:1853
msgid "Substraction"
msgstr "Substraction"

#: flatcamGUI/FlatCAMGUI.py:1854 flatcamGUI/ObjectUI.py:1470
#: flatcamGUI/PreferencesUI.py:3159
msgid "Cut"
msgstr "Cut"

#: flatcamGUI/FlatCAMGUI.py:1861
msgid "Pad"
msgstr "Pad"

#: flatcamGUI/FlatCAMGUI.py:1862
msgid "Pad Array"
msgstr "Pad Array"

#: flatcamGUI/FlatCAMGUI.py:1865
msgid "Track"
msgstr "Track"

#: flatcamGUI/FlatCAMGUI.py:1866
msgid "Region"
msgstr "Region"

#: flatcamGUI/FlatCAMGUI.py:1882
msgid "Exc Editor"
msgstr "Exc Editor"

#: flatcamGUI/FlatCAMGUI.py:1912
msgid ""
"Relative neasurement.\n"
"Reference is last click position"
msgstr ""
"Relative neasurement.\n"
"Reference is last click position"

#: flatcamGUI/FlatCAMGUI.py:1918
msgid ""
"Absolute neasurement.\n"
"Reference is (X=0, Y= 0) position"
msgstr ""
"Absolute neasurement.\n"
"Reference is (X=0, Y= 0) position"

#: flatcamGUI/FlatCAMGUI.py:2033
msgid "Lock Toolbars"
msgstr "Lock Toolbars"

#: flatcamGUI/FlatCAMGUI.py:2125
msgid "&Cutout Tool"
msgstr "&Cutout Tool"

#: flatcamGUI/FlatCAMGUI.py:2161
msgid "Select 'Esc'"
msgstr "Select 'Esc'"

#: flatcamGUI/FlatCAMGUI.py:2188
msgid "Copy Objects"
msgstr "Copy Objects"

#: flatcamGUI/FlatCAMGUI.py:2195
msgid "Move Objects"
msgstr "Move Objects"

#: flatcamGUI/FlatCAMGUI.py:2672
msgid ""
"Please first select a geometry item to be cutted\n"
"then select the geometry item that will be cutted\n"
"out of the first item. In the end press ~X~ key or\n"
"the toolbar button."
msgstr ""
"Please first select a geometry item to be cutted\n"
"then select the geometry item that will be cutted\n"
"out of the first item. In the end press ~X~ key or\n"
"the toolbar button."

#: flatcamGUI/FlatCAMGUI.py:2679 flatcamGUI/FlatCAMGUI.py:2822
#: flatcamGUI/FlatCAMGUI.py:2881 flatcamGUI/FlatCAMGUI.py:2901
msgid "Warning"
msgstr "Warning"

#: flatcamGUI/FlatCAMGUI.py:2817
msgid ""
"Please select geometry items \n"
"on which to perform Intersection Tool."
msgstr ""
"Please select geometry items \n"
"on which to perform Intersection Tool."

#: flatcamGUI/FlatCAMGUI.py:2876
msgid ""
"Please select geometry items \n"
"on which to perform Substraction Tool."
msgstr ""
"Please select geometry items \n"
"on which to perform Substraction Tool."

#: flatcamGUI/FlatCAMGUI.py:2896
msgid ""
"Please select geometry items \n"
"on which to perform union."
msgstr ""
"Please select geometry items \n"
"on which to perform union."

#: flatcamGUI/FlatCAMGUI.py:2980 flatcamGUI/FlatCAMGUI.py:3198
msgid "Cancelled. Nothing selected to delete."
msgstr "Cancelled. Nothing selected to delete."

#: flatcamGUI/FlatCAMGUI.py:3065 flatcamGUI/FlatCAMGUI.py:3266
msgid "Cancelled. Nothing selected to copy."
msgstr "Cancelled. Nothing selected to copy."

#: flatcamGUI/FlatCAMGUI.py:3112 flatcamGUI/FlatCAMGUI.py:3313
msgid "Cancelled. Nothing selected to move."
msgstr "Cancelled. Nothing selected to move."

#: flatcamGUI/FlatCAMGUI.py:3339
msgid "New Tool ..."
msgstr "New Tool ..."

#: flatcamGUI/FlatCAMGUI.py:3340 flatcamTools/ToolNonCopperClear.py:541
#: flatcamTools/ToolPaint.py:453 flatcamTools/ToolSolderPaste.py:465
msgid "Enter a Tool Diameter"
msgstr "Enter a Tool Diameter"

#: flatcamGUI/FlatCAMGUI.py:3356
msgid "Adding Tool cancelled ..."
msgstr "Adding Tool cancelled ..."

#: flatcamGUI/FlatCAMGUI.py:3399
#| msgid "Measurement Tool exit..."
msgid "Distance Tool exit..."
msgstr "Distance Tool exit..."

#: flatcamGUI/FlatCAMGUI.py:3543 flatcamGUI/FlatCAMGUI.py:3550
msgid "Idle."
msgstr "Idle."

#: flatcamGUI/FlatCAMGUI.py:3579
msgid "Application started ..."
msgstr "Application started ..."

#: flatcamGUI/FlatCAMGUI.py:3580
msgid "Hello!"
msgstr "Hello!"

#: flatcamGUI/FlatCAMGUI.py:3636
msgid "Open Project ..."
msgstr "Open Project ..."

#: flatcamGUI/FlatCAMGUI.py:3661
msgid "Exit"
msgstr "Exit"

#: flatcamGUI/ObjectUI.py:34
msgid "FlatCAM Object"
msgstr "FlatCAM Object"

#: flatcamGUI/ObjectUI.py:59
msgid ""
"BASIC is suitable for a beginner. Many parameters\n"
"are hidden from the user in this mode.\n"
"ADVANCED mode will make available all parameters.\n"
"\n"
"To change the application LEVEL, go to:\n"
"Edit -> Preferences -> General and check:\n"
"'APP. LEVEL' radio button."
msgstr ""
"BASIC is suitable for a beginner. Many parameters\n"
"are hidden from the user in this mode.\n"
"ADVANCED mode will make available all parameters.\n"
"\n"
"To change the application LEVEL, go to:\n"
"Edit -> Preferences -> General and check:\n"
"'APP. LEVEL' radio button."

#: flatcamGUI/ObjectUI.py:82
msgid "Change the size of the object."
msgstr "Change the size of the object."

#: flatcamGUI/ObjectUI.py:90
msgid "Factor"
msgstr "Factor"

#: flatcamGUI/ObjectUI.py:92
msgid ""
"Factor by which to multiply\n"
"geometric features of this object."
msgstr ""
"Factor by which to multiply\n"
"geometric features of this object."

#: flatcamGUI/ObjectUI.py:103
msgid "Perform scaling operation."
msgstr "Perform scaling operation."

#: flatcamGUI/ObjectUI.py:111
msgid "Change the position of this object."
msgstr "Change the position of this object."

#: flatcamGUI/ObjectUI.py:118
msgid "Vector"
msgstr "Vector"

#: flatcamGUI/ObjectUI.py:120
msgid ""
"Amount by which to move the object\n"
"in the x and y axes in (x, y) format."
msgstr ""
"Amount by which to move the object\n"
"in the x and y axes in (x, y) format."

#: flatcamGUI/ObjectUI.py:130
msgid "Perform the offset operation."
msgstr "Perform the offset operation."

#: flatcamGUI/ObjectUI.py:144
msgid "Gerber Object"
msgstr "Gerber Object"

#: flatcamGUI/ObjectUI.py:151 flatcamGUI/ObjectUI.py:622
#: flatcamGUI/ObjectUI.py:955 flatcamGUI/ObjectUI.py:1454
#: flatcamGUI/PreferencesUI.py:1130 flatcamGUI/PreferencesUI.py:1791
#: flatcamGUI/PreferencesUI.py:2739 flatcamGUI/PreferencesUI.py:3133
msgid "Plot Options"
msgstr "Plot Options"

#: flatcamGUI/ObjectUI.py:157 flatcamGUI/ObjectUI.py:623
#: flatcamGUI/PreferencesUI.py:1137 flatcamGUI/PreferencesUI.py:1803
msgid "Solid"
msgstr "Solid"

#: flatcamGUI/ObjectUI.py:159 flatcamGUI/PreferencesUI.py:1139
msgid "Solid color polygons."
msgstr "Solid color polygons."

#: flatcamGUI/ObjectUI.py:165 flatcamGUI/PreferencesUI.py:1144
msgid "M-Color"
msgstr "M-Color"

#: flatcamGUI/ObjectUI.py:167 flatcamGUI/PreferencesUI.py:1146
msgid "Draw polygons in different colors."
msgstr "Draw polygons in different colors."

#: flatcamGUI/ObjectUI.py:173 flatcamGUI/ObjectUI.py:661
#: flatcamGUI/PreferencesUI.py:1151 flatcamGUI/PreferencesUI.py:1797
#: flatcamGUI/PreferencesUI.py:2743
msgid "Plot"
msgstr "Plot"

#: flatcamGUI/ObjectUI.py:175 flatcamGUI/ObjectUI.py:663
#: flatcamGUI/ObjectUI.py:1001 flatcamGUI/ObjectUI.py:1564
#: flatcamGUI/PreferencesUI.py:1153 flatcamGUI/PreferencesUI.py:2745
#: flatcamGUI/PreferencesUI.py:3144
msgid "Plot (show) this object."
msgstr "Plot (show) this object."

#: flatcamGUI/ObjectUI.py:183 flatcamGUI/ObjectUI.py:634
#: flatcamGUI/ObjectUI.py:961 flatcamGUI/ObjectUI.py:1484
#: flatcamGUI/ObjectUI.py:1739 flatcamGUI/ObjectUI.py:1791
msgid "Name"
msgstr "Name"

#: flatcamGUI/ObjectUI.py:204
msgid ""
"Toggle the display of the Gerber Apertures Table.\n"
"When unchecked, it will delete all mark shapes\n"
"that are drawn on canvas."
msgstr ""
"Toggle the display of the Gerber Apertures Table.\n"
"When unchecked, it will delete all mark shapes\n"
"that are drawn on canvas."

#: flatcamGUI/ObjectUI.py:214
msgid "Mark All"
msgstr "Mark All"

#: flatcamGUI/ObjectUI.py:216
msgid ""
"When checked it will display all the apertures.\n"
"When unchecked, it will delete all mark shapes\n"
"that are drawn on canvas."
msgstr ""
"When checked it will display all the apertures.\n"
"When unchecked, it will delete all mark shapes\n"
"that are drawn on canvas."

#: flatcamGUI/ObjectUI.py:244
msgid "Mark the aperture instances on canvas."
msgstr "Mark the aperture instances on canvas."

#: flatcamGUI/ObjectUI.py:251 flatcamGUI/PreferencesUI.py:1228
msgid "Isolation Routing"
msgstr "Isolation Routing"

#: flatcamGUI/ObjectUI.py:253 flatcamGUI/PreferencesUI.py:1230
msgid ""
"Create a Geometry object with\n"
"toolpaths to cut outside polygons."
msgstr ""
"Create a Geometry object with\n"
"toolpaths to cut outside polygons."

#: flatcamGUI/ObjectUI.py:266 flatcamGUI/PreferencesUI.py:1391
#: flatcamGUI/PreferencesUI.py:3464 flatcamTools/ToolNonCopperClear.py:196
msgid "Tool Type"
msgstr "Tool Type"

#: flatcamGUI/ObjectUI.py:268 flatcamGUI/PreferencesUI.py:1393
msgid ""
"Choose what tool to use for Gerber isolation:\n"
"'Circular' or 'V-shape'.\n"
"When the 'V-shape' is selected then the tool\n"
"diameter will depend on the chosen cut depth."
msgstr ""
"Choose what tool to use for Gerber isolation:\n"
"'Circular' or 'V-shape'.\n"
"When the 'V-shape' is selected then the tool\n"
"diameter will depend on the chosen cut depth."

#: flatcamGUI/ObjectUI.py:280 flatcamGUI/ObjectUI.py:1170
#: flatcamGUI/PreferencesUI.py:1405 flatcamGUI/PreferencesUI.py:3483
#: flatcamTools/ToolNonCopperClear.py:223
msgid "V-Tip Dia"
msgstr "V-Tip Dia"

#: flatcamGUI/ObjectUI.py:282 flatcamGUI/ObjectUI.py:1173
#: flatcamGUI/PreferencesUI.py:1407 flatcamGUI/PreferencesUI.py:3485
#: flatcamTools/ToolNonCopperClear.py:225
msgid "The tip diameter for V-Shape Tool"
msgstr "The tip diameter for V-Shape Tool"

#: flatcamGUI/ObjectUI.py:292 flatcamGUI/ObjectUI.py:1181
#: flatcamGUI/PreferencesUI.py:1417 flatcamGUI/PreferencesUI.py:3492
#: flatcamTools/ToolNonCopperClear.py:233
msgid "V-Tip Angle"
msgstr "V-Tip Angle"

#: flatcamGUI/ObjectUI.py:294 flatcamGUI/ObjectUI.py:1184
#: flatcamGUI/PreferencesUI.py:1419 flatcamGUI/PreferencesUI.py:3494
#: flatcamTools/ToolNonCopperClear.py:235
msgid ""
"The tip angle for V-Shape Tool.\n"
"In degree."
msgstr ""
"The tip angle for V-Shape Tool.\n"
"In degree."

#: flatcamGUI/ObjectUI.py:305 flatcamGUI/ObjectUI.py:714
#: flatcamGUI/ObjectUI.py:1193 flatcamGUI/PreferencesUI.py:1430
#: flatcamGUI/PreferencesUI.py:2050 flatcamGUI/PreferencesUI.py:2800
#: flatcamGUI/PreferencesUI.py:3542 flatcamGUI/PreferencesUI.py:4230
#: flatcamTools/ToolCalculators.py:110 flatcamTools/ToolNonCopperClear.py:278
msgid "Cut Z"
msgstr "Cut Z"

#: flatcamGUI/ObjectUI.py:307 flatcamGUI/ObjectUI.py:1196
#: flatcamGUI/PreferencesUI.py:1432 flatcamGUI/PreferencesUI.py:2802
msgid ""
"Cutting depth (negative)\n"
"below the copper surface."
msgstr ""
"Cutting depth (negative)\n"
"below the copper surface."

#: flatcamGUI/ObjectUI.py:320
msgid ""
"Diameter of the cutting tool.\n"
"If you want to have an isolation path\n"
"inside the actual shape of the Gerber\n"
"feature, use a negative value for\n"
"this parameter."
msgstr ""
"Diameter of the cutting tool.\n"
"If you want to have an isolation path\n"
"inside the actual shape of the Gerber\n"
"feature, use a negative value for\n"
"this parameter."

#: flatcamGUI/ObjectUI.py:332 flatcamGUI/PreferencesUI.py:1248
msgid "# Passes"
msgstr "# Passes"

#: flatcamGUI/ObjectUI.py:334 flatcamGUI/PreferencesUI.py:1250
msgid ""
"Width of the isolation gap in\n"
"number (integer) of tool widths."
msgstr ""
"Width of the isolation gap in\n"
"number (integer) of tool widths."

#: flatcamGUI/ObjectUI.py:344 flatcamGUI/PreferencesUI.py:1259
msgid "Pass overlap"
msgstr "Pass overlap"

#: flatcamGUI/ObjectUI.py:346 flatcamGUI/PreferencesUI.py:1261
#, python-format
msgid ""
"How much (fraction) of the tool width to overlap each tool pass.\n"
"Example:\n"
"A value here of 0.25 means an overlap of 25%% from the tool diameter found "
"above."
msgstr ""
"How much (fraction) of the tool width to overlap each tool pass.\n"
"Example:\n"
"A value here of 0.25 means an overlap of 25%% from the tool diameter found "
"above."

#: flatcamGUI/ObjectUI.py:360 flatcamGUI/PreferencesUI.py:1274
#: flatcamGUI/PreferencesUI.py:3111 flatcamGUI/PreferencesUI.py:3502
#: flatcamTools/ToolNonCopperClear.py:148
msgid "Milling Type"
msgstr "Milling Type"

#: flatcamGUI/ObjectUI.py:362 flatcamGUI/PreferencesUI.py:1276
#: flatcamGUI/PreferencesUI.py:3113
msgid ""
"Milling type:\n"
"- climb / best for precision milling and to reduce tool usage\n"
"- conventional / useful when there is no backlash compensation"
msgstr ""
"Milling type:\n"
"- climb / best for precision milling and to reduce tool usage\n"
"- conventional / useful when there is no backlash compensation"

#: flatcamGUI/ObjectUI.py:366 flatcamGUI/PreferencesUI.py:1281
#: flatcamGUI/PreferencesUI.py:3117 flatcamGUI/PreferencesUI.py:3509
#: flatcamTools/ToolNonCopperClear.py:155
msgid "Climb"
msgstr "Climb"

#: flatcamGUI/ObjectUI.py:367 flatcamGUI/PreferencesUI.py:1282
#: flatcamGUI/PreferencesUI.py:3118 flatcamGUI/PreferencesUI.py:3510
#: flatcamTools/ToolNonCopperClear.py:156
msgid "Conv."
msgstr "Conv."

#: flatcamGUI/ObjectUI.py:372 flatcamGUI/PreferencesUI.py:1286
msgid "Combine Passes"
msgstr "Combine Passes"

#: flatcamGUI/ObjectUI.py:374 flatcamGUI/PreferencesUI.py:1288
msgid "Combine all passes into one object"
msgstr "Combine all passes into one object"

#: flatcamGUI/ObjectUI.py:378 flatcamGUI/PreferencesUI.py:1372
msgid "\"Follow\""
msgstr "\"Follow\""

#: flatcamGUI/ObjectUI.py:379 flatcamGUI/PreferencesUI.py:1374
msgid ""
"Generate a 'Follow' geometry.\n"
"This means that it will cut through\n"
"the middle of the trace."
msgstr ""
"Generate a 'Follow' geometry.\n"
"This means that it will cut through\n"
"the middle of the trace."

#: flatcamGUI/ObjectUI.py:384
msgid "Except"
msgstr "Except"

#: flatcamGUI/ObjectUI.py:385
msgid ""
"When the isolation geometry is generated,\n"
"by checking this, the area of the object bellow\n"
"will be subtracted from the isolation geometry."
msgstr ""
"When the isolation geometry is generated,\n"
"by checking this, the area of the object bellow\n"
"will be subtracted from the isolation geometry."

#: flatcamGUI/ObjectUI.py:410 flatcamTools/ToolCutOut.py:54
#: flatcamTools/ToolNonCopperClear.py:70 flatcamTools/ToolPaint.py:69
msgid "Obj Type"
msgstr "Obj Type"

#: flatcamGUI/ObjectUI.py:412
msgid ""
"Specify the type of object to be excepted from isolation.\n"
"It can be of type: Gerber or Geometry.\n"
"What is selected here will dictate the kind\n"
"of objects that will populate the 'Object' combobox."
msgstr ""
"Specify the type of object to be excepted from isolation.\n"
"It can be of type: Gerber or Geometry.\n"
"What is selected here will dictate the kind\n"
"of objects that will populate the 'Object' combobox."

#: flatcamGUI/ObjectUI.py:425 flatcamTools/ToolCutOut.py:70
#: flatcamTools/ToolNonCopperClear.py:88 flatcamTools/ToolPaint.py:87
#: flatcamTools/ToolPanelize.py:71 flatcamTools/ToolPanelize.py:84
msgid "Object"
msgstr "Object"

#: flatcamGUI/ObjectUI.py:426
msgid "Object whose area will be removed from isolation geometry."
msgstr "Object whose area will be removed from isolation geometry."

#: flatcamGUI/ObjectUI.py:430
msgid "Generate Isolation Geometry"
msgstr "Generate Isolation Geometry"

#: flatcamGUI/ObjectUI.py:432
msgid ""
"Create a Geometry object with toolpaths to cut \n"
"isolation outside, inside or on both sides of the\n"
"object. For a Gerber object outside means outside\n"
"of the Gerber feature and inside means inside of\n"
"the Gerber feature, if possible at all. This means\n"
"that only if the Gerber feature has openings inside, they\n"
"will be isolated. If what is wanted is to cut isolation\n"
"inside the actual Gerber feature, use a negative tool\n"
"diameter above."
msgstr ""
"Create a Geometry object with toolpaths to cut \n"
"isolation outside, inside or on both sides of the\n"
"object. For a Gerber object outside means outside\n"
"of the Gerber feature and inside means inside of\n"
"the Gerber feature, if possible at all. This means\n"
"that only if the Gerber feature has openings inside, they\n"
"will be isolated. If what is wanted is to cut isolation\n"
"inside the actual Gerber feature, use a negative tool\n"
"diameter above."

#: flatcamGUI/ObjectUI.py:444
msgid "Buffer Solid Geometry"
msgstr "Buffer Solid Geometry"

#: flatcamGUI/ObjectUI.py:446
msgid ""
"This button is shown only when the Gerber file\n"
"is loaded without buffering.\n"
"Clicking this will create the buffered geometry\n"
"required for isolation."
msgstr ""
"This button is shown only when the Gerber file\n"
"is loaded without buffering.\n"
"Clicking this will create the buffered geometry\n"
"required for isolation."

#: flatcamGUI/ObjectUI.py:453
msgid "FULL Geo"
msgstr "FULL Geo"

#: flatcamGUI/ObjectUI.py:455
msgid ""
"Create the Geometry Object\n"
"for isolation routing. It contains both\n"
"the interiors and exteriors geometry."
msgstr ""
"Create the Geometry Object\n"
"for isolation routing. It contains both\n"
"the interiors and exteriors geometry."

#: flatcamGUI/ObjectUI.py:464
msgid "Ext Geo"
msgstr "Ext Geo"

#: flatcamGUI/ObjectUI.py:466
msgid ""
"Create the Geometry Object\n"
"for isolation routing containing\n"
"only the exteriors geometry."
msgstr ""
"Create the Geometry Object\n"
"for isolation routing containing\n"
"only the exteriors geometry."

#: flatcamGUI/ObjectUI.py:473
msgid "Int Geo"
msgstr "Int Geo"

#: flatcamGUI/ObjectUI.py:475
msgid ""
"Create the Geometry Object\n"
"for isolation routing containing\n"
"only the interiors geometry."
msgstr ""
"Create the Geometry Object\n"
"for isolation routing containing\n"
"only the interiors geometry."

#: flatcamGUI/ObjectUI.py:505
msgid "Clear N-copper"
msgstr "Clear N-copper"

#: flatcamGUI/ObjectUI.py:507 flatcamGUI/PreferencesUI.py:3447
msgid ""
"Create a Geometry object with\n"
"toolpaths to cut all non-copper regions."
msgstr ""
"Create a Geometry object with\n"
"toolpaths to cut all non-copper regions."

#: flatcamGUI/ObjectUI.py:514 flatcamTools/ToolNonCopperClear.py:460
msgid ""
"Create the Geometry Object\n"
"for non-copper routing."
msgstr ""
"Create the Geometry Object\n"
"for non-copper routing."

#: flatcamGUI/ObjectUI.py:521
msgid "Board cutout"
msgstr "Board cutout"

#: flatcamGUI/ObjectUI.py:523 flatcamGUI/PreferencesUI.py:3706
msgid ""
"Create toolpaths to cut around\n"
"the PCB and separate it from\n"
"the original board."
msgstr ""
"Create toolpaths to cut around\n"
"the PCB and separate it from\n"
"the original board."

#: flatcamGUI/ObjectUI.py:530
msgid ""
"Generate the geometry for\n"
"the board cutout."
msgstr ""
"Generate the geometry for\n"
"the board cutout."

#: flatcamGUI/ObjectUI.py:537 flatcamGUI/PreferencesUI.py:1293
msgid "Non-copper regions"
msgstr "Non-copper regions"

#: flatcamGUI/ObjectUI.py:539 flatcamGUI/PreferencesUI.py:1295
msgid ""
"Create polygons covering the\n"
"areas without copper on the PCB.\n"
"Equivalent to the inverse of this\n"
"object. Can be used to remove all\n"
"copper from a specified region."
msgstr ""
"Create polygons covering the\n"
"areas without copper on the PCB.\n"
"Equivalent to the inverse of this\n"
"object. Can be used to remove all\n"
"copper from a specified region."

#: flatcamGUI/ObjectUI.py:549 flatcamGUI/ObjectUI.py:581
#: flatcamGUI/PreferencesUI.py:1307 flatcamGUI/PreferencesUI.py:1332
msgid "Boundary Margin"
msgstr "Boundary Margin"

#: flatcamGUI/ObjectUI.py:551 flatcamGUI/PreferencesUI.py:1309
msgid ""
"Specify the edge of the PCB\n"
"by drawing a box around all\n"
"objects with this minimum\n"
"distance."
msgstr ""
"Specify the edge of the PCB\n"
"by drawing a box around all\n"
"objects with this minimum\n"
"distance."

#: flatcamGUI/ObjectUI.py:562 flatcamGUI/ObjectUI.py:591
#: flatcamGUI/PreferencesUI.py:1319 flatcamGUI/PreferencesUI.py:1341
msgid "Rounded Geo"
msgstr "Rounded Geo"

#: flatcamGUI/ObjectUI.py:564 flatcamGUI/PreferencesUI.py:1321
msgid "Resulting geometry will have rounded corners."
msgstr "Resulting geometry will have rounded corners."

#: flatcamGUI/ObjectUI.py:568 flatcamGUI/ObjectUI.py:600
#: flatcamTools/ToolCutOut.py:190 flatcamTools/ToolCutOut.py:210
#: flatcamTools/ToolCutOut.py:261 flatcamTools/ToolSolderPaste.py:127
msgid "Generate Geo"
msgstr "Generate Geo"

#: flatcamGUI/ObjectUI.py:573 flatcamGUI/PreferencesUI.py:1326
#: flatcamTools/ToolPanelize.py:85
msgid "Bounding Box"
msgstr "Bounding Box"

#: flatcamGUI/ObjectUI.py:575
msgid ""
"Create a geometry surrounding the Gerber object.\n"
"Square shape."
msgstr ""
"Create a geometry surrounding the Gerber object.\n"
"Square shape."

#: flatcamGUI/ObjectUI.py:583 flatcamGUI/PreferencesUI.py:1334
msgid ""
"Distance of the edges of the box\n"
"to the nearest polygon."
msgstr ""
"Distance of the edges of the box\n"
"to the nearest polygon."

#: flatcamGUI/ObjectUI.py:593 flatcamGUI/PreferencesUI.py:1343
msgid ""
"If the bounding box is \n"
"to have rounded corners\n"
"their radius is equal to\n"
"the margin."
msgstr ""
"If the bounding box is \n"
"to have rounded corners\n"
"their radius is equal to\n"
"the margin."

#: flatcamGUI/ObjectUI.py:602
msgid "Generate the Geometry object."
msgstr "Generate the Geometry object."

#: flatcamGUI/ObjectUI.py:614
msgid "Excellon Object"
msgstr "Excellon Object"

#: flatcamGUI/ObjectUI.py:625
msgid "Solid circles."
msgstr "Solid circles."

#: flatcamGUI/ObjectUI.py:673
msgid "Drills"
msgstr "Drills"

#: flatcamGUI/ObjectUI.py:673 flatcamGUI/PreferencesUI.py:2599
msgid "Slots"
msgstr "Slots"

#: flatcamGUI/ObjectUI.py:674 flatcamGUI/PreferencesUI.py:2227
msgid "Offset Z"
msgstr "Offset Z"

#: flatcamGUI/ObjectUI.py:678
msgid ""
"This is the Tool Number.\n"
"When ToolChange is checked, on toolchange event this value\n"
"will be showed as a T1, T2 ... Tn in the Machine Code.\n"
"\n"
"Here the tools are selected for G-code generation."
msgstr ""
"This is the Tool Number.\n"
"When ToolChange is checked, on toolchange event this value\n"
"will be showed as a T1, T2 ... Tn in the Machine Code.\n"
"\n"
"Here the tools are selected for G-code generation."

#: flatcamGUI/ObjectUI.py:683 flatcamGUI/ObjectUI.py:1026
#: flatcamTools/ToolPaint.py:121
msgid ""
"Tool Diameter. It's value (in current FlatCAM units) \n"
"is the cut width into the material."
msgstr ""
"Tool Diameter. It's value (in current FlatCAM units) \n"
"is the cut width into the material."

#: flatcamGUI/ObjectUI.py:686
msgid ""
"The number of Drill holes. Holes that are drilled with\n"
"a drill bit."
msgstr ""
"The number of Drill holes. Holes that are drilled with\n"
"a drill bit."

#: flatcamGUI/ObjectUI.py:689
msgid ""
"The number of Slot holes. Holes that are created by\n"
"milling them with an endmill bit."
msgstr ""
"The number of Slot holes. Holes that are created by\n"
"milling them with an endmill bit."

#: flatcamGUI/ObjectUI.py:692 flatcamGUI/PreferencesUI.py:2229
msgid ""
"Some drill bits (the larger ones) need to drill deeper\n"
"to create the desired exit hole diameter due of the tip shape.\n"
"The value here can compensate the Cut Z parameter."
msgstr ""
"Some drill bits (the larger ones) need to drill deeper\n"
"to create the desired exit hole diameter due of the tip shape.\n"
"The value here can compensate the Cut Z parameter."

#: flatcamGUI/ObjectUI.py:696
msgid ""
"Toggle display of the drills for the current tool.\n"
"This does not select the tools for G-code generation."
msgstr ""
"Toggle display of the drills for the current tool.\n"
"This does not select the tools for G-code generation."

#: flatcamGUI/ObjectUI.py:703 flatcamGUI/PreferencesUI.py:2039
#: flatcamGUI/PreferencesUI.py:2788
msgid "Create CNC Job"
msgstr "Create CNC Job"

#: flatcamGUI/ObjectUI.py:705
msgid ""
"Create a CNC Job object\n"
"for this drill object."
msgstr ""
"Create a CNC Job object\n"
"for this drill object."

#: flatcamGUI/ObjectUI.py:716 flatcamGUI/PreferencesUI.py:2052
msgid ""
"Drill depth (negative)\n"
"below the copper surface."
msgstr ""
"Drill depth (negative)\n"
"below the copper surface."

#: flatcamGUI/ObjectUI.py:724 flatcamGUI/ObjectUI.py:1227
#: flatcamGUI/PreferencesUI.py:2060 flatcamGUI/PreferencesUI.py:2838
msgid "Travel Z"
msgstr "Travel Z"

#: flatcamGUI/ObjectUI.py:726 flatcamGUI/PreferencesUI.py:2062
msgid ""
"Tool height when travelling\n"
"across the XY plane."
msgstr ""
"Tool height when travelling\n"
"across the XY plane."

#: flatcamGUI/ObjectUI.py:734 flatcamGUI/ObjectUI.py:1245
#: flatcamGUI/PreferencesUI.py:2070 flatcamGUI/PreferencesUI.py:2848
msgid "Tool change"
msgstr "Tool change"

#: flatcamGUI/ObjectUI.py:736 flatcamGUI/PreferencesUI.py:2072
msgid ""
"Include tool-change sequence\n"
"in G-Code (Pause for tool change)."
msgstr ""
"Include tool-change sequence\n"
"in G-Code (Pause for tool change)."

#: flatcamGUI/ObjectUI.py:742 flatcamGUI/ObjectUI.py:1238
msgid "Tool change Z"
msgstr "Tool change Z"

#: flatcamGUI/ObjectUI.py:744 flatcamGUI/ObjectUI.py:1241
#: flatcamGUI/PreferencesUI.py:2081 flatcamGUI/PreferencesUI.py:2863
msgid ""
"Z-axis position (height) for\n"
"tool change."
msgstr ""
"Z-axis position (height) for\n"
"tool change."

#: flatcamGUI/ObjectUI.py:753 flatcamGUI/PreferencesUI.py:2244
#: flatcamGUI/PreferencesUI.py:2977
msgid "Start move Z"
msgstr "Start move Z"

#: flatcamGUI/ObjectUI.py:755 flatcamGUI/PreferencesUI.py:2246
msgid ""
"Height of the tool just after start.\n"
"Delete the value if you don't need this feature."
msgstr ""
"Height of the tool just after start.\n"
"Delete the value if you don't need this feature."

#: flatcamGUI/ObjectUI.py:763 flatcamGUI/ObjectUI.py:1271
#: flatcamGUI/PreferencesUI.py:2089 flatcamGUI/PreferencesUI.py:2872
msgid "End move Z"
msgstr "End move Z"

#: flatcamGUI/ObjectUI.py:765 flatcamGUI/ObjectUI.py:1273
#: flatcamGUI/PreferencesUI.py:2091 flatcamGUI/PreferencesUI.py:2874
msgid ""
"Height of the tool after\n"
"the last move at the end of the job."
msgstr ""
"Height of the tool after\n"
"the last move at the end of the job."

#: flatcamGUI/ObjectUI.py:773 flatcamGUI/PreferencesUI.py:2099
#: flatcamGUI/PreferencesUI.py:4521 flatcamTools/ToolSolderPaste.py:224
msgid "Feedrate Z"
msgstr "Feedrate Z"

#: flatcamGUI/ObjectUI.py:775 flatcamGUI/PreferencesUI.py:2101
msgid ""
"Tool speed while drilling\n"
"(in units per minute).\n"
"So called 'Plunge' feedrate.\n"
"This is for linear move G01."
msgstr ""
"Tool speed while drilling\n"
"(in units per minute).\n"
"So called 'Plunge' feedrate.\n"
"This is for linear move G01."

#: flatcamGUI/ObjectUI.py:785 flatcamGUI/PreferencesUI.py:2254
msgid "Feedrate Rapids"
msgstr "Feedrate Rapids"

#: flatcamGUI/ObjectUI.py:787 flatcamGUI/PreferencesUI.py:2256
msgid ""
"Tool speed while drilling\n"
"(in units per minute).\n"
"This is for the rapid move G00.\n"
"It is useful only for Marlin,\n"
"ignore for any other cases."
msgstr ""
"Tool speed while drilling\n"
"(in units per minute).\n"
"This is for the rapid move G00.\n"
"It is useful only for Marlin,\n"
"ignore for any other cases."

#: flatcamGUI/ObjectUI.py:801 flatcamGUI/ObjectUI.py:1328
#: flatcamGUI/PreferencesUI.py:2903
msgid "Spindle speed"
msgstr "Spindle speed"

#: flatcamGUI/ObjectUI.py:803 flatcamGUI/PreferencesUI.py:2113
msgid ""
"Speed of the spindle\n"
"in RPM (optional)"
msgstr ""
"Speed of the spindle\n"
"in RPM (optional)"

#: flatcamGUI/ObjectUI.py:811 flatcamGUI/ObjectUI.py:1341
#: flatcamGUI/PreferencesUI.py:2121 flatcamGUI/PreferencesUI.py:2916
msgid "Dwell"
msgstr "Dwell"

#: flatcamGUI/ObjectUI.py:813 flatcamGUI/ObjectUI.py:1344
#: flatcamGUI/PreferencesUI.py:2123 flatcamGUI/PreferencesUI.py:2918
msgid ""
"Pause to allow the spindle to reach its\n"
"speed before cutting."
msgstr ""
"Pause to allow the spindle to reach its\n"
"speed before cutting."

#: flatcamGUI/ObjectUI.py:818 flatcamGUI/ObjectUI.py:1350
#: flatcamGUI/PreferencesUI.py:2128 flatcamGUI/PreferencesUI.py:2923
msgid "Number of time units for spindle to dwell."
msgstr "Number of time units for spindle to dwell."

#: flatcamGUI/ObjectUI.py:826 flatcamGUI/PreferencesUI.py:2141
#: flatcamGUI/PreferencesUI.py:2933
msgid "Postprocessor"
msgstr "Postprocessor"

#: flatcamGUI/ObjectUI.py:828 flatcamGUI/PreferencesUI.py:2143
msgid ""
"The postprocessor JSON file that dictates\n"
"Gcode output."
msgstr ""
"The postprocessor JSON file that dictates\n"
"Gcode output."

#: flatcamGUI/ObjectUI.py:837 flatcamGUI/ObjectUI.py:1369
#: flatcamGUI/PreferencesUI.py:2267 flatcamGUI/PreferencesUI.py:3010
msgid "Probe Z depth"
msgstr "Probe Z depth"

#: flatcamGUI/ObjectUI.py:839 flatcamGUI/ObjectUI.py:1371
#: flatcamGUI/PreferencesUI.py:2269 flatcamGUI/PreferencesUI.py:3012
msgid ""
"The maximum depth that the probe is allowed\n"
"to probe. Negative value, in current units."
msgstr ""
"The maximum depth that the probe is allowed\n"
"to probe. Negative value, in current units."

#: flatcamGUI/ObjectUI.py:849 flatcamGUI/ObjectUI.py:1381
#: flatcamGUI/PreferencesUI.py:2277 flatcamGUI/PreferencesUI.py:3020
msgid "Feedrate Probe"
msgstr "Feedrate Probe"

#: flatcamGUI/ObjectUI.py:851 flatcamGUI/ObjectUI.py:1383
#: flatcamGUI/PreferencesUI.py:2279 flatcamGUI/PreferencesUI.py:3022
msgid "The feedrate used while the probe is probing."
msgstr "The feedrate used while the probe is probing."

#: flatcamGUI/ObjectUI.py:860
msgid ""
"Select from the Tools Table above\n"
"the hole dias that are to be drilled.\n"
"Use the # column to make the selection."
msgstr ""
"Select from the Tools Table above\n"
"the hole dias that are to be drilled.\n"
"Use the # column to make the selection."

#: flatcamGUI/ObjectUI.py:868 flatcamGUI/PreferencesUI.py:2152
msgid "Gcode"
msgstr "Gcode"

#: flatcamGUI/ObjectUI.py:870
msgid ""
"Choose what to use for GCode generation:\n"
"'Drills', 'Slots' or 'Both'.\n"
"When choosing 'Slots' or 'Both', slots will be\n"
"converted to a series of drills."
msgstr ""
"Choose what to use for GCode generation:\n"
"'Drills', 'Slots' or 'Both'.\n"
"When choosing 'Slots' or 'Both', slots will be\n"
"converted to a series of drills."

#: flatcamGUI/ObjectUI.py:885
msgid "Create Drills GCode"
msgstr "Create Drills GCode"

#: flatcamGUI/ObjectUI.py:887
msgid "Generate the CNC Job."
msgstr "Generate the CNC Job."

#: flatcamGUI/ObjectUI.py:892 flatcamGUI/PreferencesUI.py:2170
msgid "Mill Holes"
msgstr "Mill Holes"

#: flatcamGUI/ObjectUI.py:894 flatcamGUI/PreferencesUI.py:2172
msgid "Create Geometry for milling holes."
msgstr "Create Geometry for milling holes."

#: flatcamGUI/ObjectUI.py:899
msgid ""
"Select from the Tools Table above\n"
"the hole dias that are to be milled.\n"
"Use the # column to make the selection."
msgstr ""
"Select from the Tools Table above\n"
"the hole dias that are to be milled.\n"
"Use the # column to make the selection."

#: flatcamGUI/ObjectUI.py:907 flatcamGUI/PreferencesUI.py:2176
msgid "Drill Tool dia"
msgstr "Drill Tool dia"

#: flatcamGUI/ObjectUI.py:909 flatcamGUI/PreferencesUI.py:1241
#: flatcamGUI/PreferencesUI.py:2178
msgid "Diameter of the cutting tool."
msgstr "Diameter of the cutting tool."

#: flatcamGUI/ObjectUI.py:914
msgid "Mill Drills Geo"
msgstr "Mill Drills Geo"

#: flatcamGUI/ObjectUI.py:916
msgid ""
"Create the Geometry Object\n"
"for milling DRILLS toolpaths."
msgstr ""
"Create the Geometry Object\n"
"for milling DRILLS toolpaths."

#: flatcamGUI/ObjectUI.py:923 flatcamGUI/PreferencesUI.py:2183
msgid "Slot Tool dia"
msgstr "Slot Tool dia"

#: flatcamGUI/ObjectUI.py:925 flatcamGUI/PreferencesUI.py:2185
msgid ""
"Diameter of the cutting tool\n"
"when milling slots."
msgstr ""
"Diameter of the cutting tool\n"
"when milling slots."

#: flatcamGUI/ObjectUI.py:931
msgid "Mill Slots Geo"
msgstr "Mill Slots Geo"

#: flatcamGUI/ObjectUI.py:933
msgid ""
"Create the Geometry Object\n"
"for milling SLOTS toolpaths."
msgstr ""
"Create the Geometry Object\n"
"for milling SLOTS toolpaths."

#: flatcamGUI/ObjectUI.py:951
msgid "Geometry Object"
msgstr "Geometry Object"

#: flatcamGUI/ObjectUI.py:982
msgid ""
"Tools in this Geometry object used for cutting.\n"
"The 'Offset' entry will set an offset for the cut.\n"
"'Offset' can be inside, outside, on path (none) and custom.\n"
"'Type' entry is only informative and it allow to know the \n"
"intent of using the current tool. \n"
"It can be Rough(ing), Finish(ing) or Iso(lation).\n"
"The 'Tool type'(TT) can be circular with 1 to 4 teeths(C1..C4),\n"
"ball(B), or V-Shaped(V). \n"
"When V-shaped is selected the 'Type' entry is automatically \n"
"set to Isolation, the CutZ parameter in the UI form is\n"
"grayed out and Cut Z is automatically calculated from the newly \n"
"showed UI form entries named V-Tip Dia and V-Tip Angle."
msgstr ""
"Tools in this Geometry object used for cutting.\n"
"The 'Offset' entry will set an offset for the cut.\n"
"'Offset' can be inside, outside, on path (none) and custom.\n"
"'Type' entry is only informative and it allow to know the \n"
"intent of using the current tool. \n"
"It can be Rough(ing), Finish(ing) or Iso(lation).\n"
"The 'Tool type'(TT) can be circular with 1 to 4 teeths(C1..C4),\n"
"ball(B), or V-Shaped(V). \n"
"When V-shaped is selected the 'Type' entry is automatically \n"
"set to Isolation, the CutZ parameter in the UI form is\n"
"grayed out and Cut Z is automatically calculated from the newly \n"
"showed UI form entries named V-Tip Dia and V-Tip Angle."

#: flatcamGUI/ObjectUI.py:999 flatcamGUI/ObjectUI.py:1562
#: flatcamGUI/PreferencesUI.py:3143
msgid "Plot Object"
msgstr "Plot Object"

#: flatcamGUI/ObjectUI.py:1013 flatcamGUI/ObjectUI.py:1578
msgid "Dia"
msgstr "Dia"

#: flatcamGUI/ObjectUI.py:1013 flatcamGUI/ObjectUI.py:1578
#: flatcamTools/ToolNonCopperClear.py:108 flatcamTools/ToolPaint.py:107
msgid "TT"
msgstr "TT"

#: flatcamGUI/ObjectUI.py:1020
msgid ""
"This is the Tool Number.\n"
"When ToolChange is checked, on toolchange event this value\n"
"will be showed as a T1, T2 ... Tn"
msgstr ""
"This is the Tool Number.\n"
"When ToolChange is checked, on toolchange event this value\n"
"will be showed as a T1, T2 ... Tn"

#: flatcamGUI/ObjectUI.py:1031
msgid ""
"The value for the Offset can be:\n"
"- Path -> There is no offset, the tool cut will be done through the geometry "
"line.\n"
"- In(side) -> The tool cut will follow the geometry inside. It will create a "
"'pocket'.\n"
"- Out(side) -> The tool cut will follow the geometry line on the outside."
msgstr ""
"The value for the Offset can be:\n"
"- Path -> There is no offset, the tool cut will be done through the geometry "
"line.\n"
"- In(side) -> The tool cut will follow the geometry inside. It will create a "
"'pocket'.\n"
"- Out(side) -> The tool cut will follow the geometry line on the outside."

#: flatcamGUI/ObjectUI.py:1038
msgid ""
"The (Operation) Type has only informative value. Usually the UI form "
"values \n"
"are choose based on the operation type and this will serve as a reminder.\n"
"Can be 'Roughing', 'Finishing' or 'Isolation'.\n"
"For Roughing we may choose a lower Feedrate and multiDepth cut.\n"
"For Finishing we may choose a higher Feedrate, without multiDepth.\n"
"For Isolation we need a lower Feedrate as it use a milling bit with a fine "
"tip."
msgstr ""
"The (Operation) Type has only informative value. Usually the UI form "
"values \n"
"are choose based on the operation type and this will serve as a reminder.\n"
"Can be 'Roughing', 'Finishing' or 'Isolation'.\n"
"For Roughing we may choose a lower Feedrate and multiDepth cut.\n"
"For Finishing we may choose a higher Feedrate, without multiDepth.\n"
"For Isolation we need a lower Feedrate as it use a milling bit with a fine "
"tip."

#: flatcamGUI/ObjectUI.py:1047
msgid ""
"The Tool Type (TT) can be:\n"
"- Circular with 1 ... 4 teeth -> it is informative only. Being circular the "
"cut width in material\n"
"is exactly the tool diameter.\n"
"- Ball -> informative only and make reference to the Ball type endmill.\n"
"- V-Shape -> it will disable de Z-Cut parameter in the UI form and enable "
"two additional UI form\n"
"fields: V-Tip Dia and V-Tip Angle. Adjusting those two values will adjust "
"the Z-Cut parameter such\n"
"as the cut width into material will be equal with the value in the Tool "
"Diameter column of this table.\n"
"Choosing the V-Shape Tool Type automatically will select the Operation Type "
"as Isolation."
msgstr ""
"The Tool Type (TT) can be:\n"
"- Circular with 1 ... 4 teeth -> it is informative only. Being circular the "
"cut width in material\n"
"is exactly the tool diameter.\n"
"- Ball -> informative only and make reference to the Ball type endmill.\n"
"- V-Shape -> it will disable de Z-Cut parameter in the UI form and enable "
"two additional UI form\n"
"fields: V-Tip Dia and V-Tip Angle. Adjusting those two values will adjust "
"the Z-Cut parameter such\n"
"as the cut width into material will be equal with the value in the Tool "
"Diameter column of this table.\n"
"Choosing the V-Shape Tool Type automatically will select the Operation Type "
"as Isolation."

#: flatcamGUI/ObjectUI.py:1059
msgid ""
"Plot column. It is visible only for MultiGeo geometries, meaning geometries "
"that holds the geometry\n"
"data into the tools. For those geometries, deleting the tool will delete the "
"geometry data also,\n"
"so be WARNED. From the checkboxes on each row it can be enabled/disabled the "
"plot on canvas\n"
"for the corresponding tool."
msgstr ""
"Plot column. It is visible only for MultiGeo geometries, meaning geometries "
"that holds the geometry\n"
"data into the tools. For those geometries, deleting the tool will delete the "
"geometry data also,\n"
"so be WARNED. From the checkboxes on each row it can be enabled/disabled the "
"plot on canvas\n"
"for the corresponding tool."

#: flatcamGUI/ObjectUI.py:1072
msgid "Tool Offset"
msgstr "Tool Offset"

#: flatcamGUI/ObjectUI.py:1075
msgid ""
"The value to offset the cut when \n"
"the Offset type selected is 'Offset'.\n"
"The value can be positive for 'outside'\n"
"cut and negative for 'inside' cut."
msgstr ""
"The value to offset the cut when \n"
"the Offset type selected is 'Offset'.\n"
"The value can be positive for 'outside'\n"
"cut and negative for 'inside' cut."

#: flatcamGUI/ObjectUI.py:1117 flatcamTools/ToolNonCopperClear.py:248
#: flatcamTools/ToolPaint.py:174
msgid ""
"Add a new tool to the Tool Table\n"
"with the diameter specified above."
msgstr ""
"Add a new tool to the Tool Table\n"
"with the diameter specified above."

#: flatcamGUI/ObjectUI.py:1125
msgid ""
"Copy a selection of tools in the Tool Table\n"
"by first selecting a row in the Tool Table."
msgstr ""
"Copy a selection of tools in the Tool Table\n"
"by first selecting a row in the Tool Table."

#: flatcamGUI/ObjectUI.py:1133
msgid ""
"Delete a selection of tools in the Tool Table\n"
"by first selecting a row in the Tool Table."
msgstr ""
"Delete a selection of tools in the Tool Table\n"
"by first selecting a row in the Tool Table."

#: flatcamGUI/ObjectUI.py:1149
msgid "Tool Data"
msgstr "Tool Data"

#: flatcamGUI/ObjectUI.py:1152
msgid ""
"The data used for creating GCode.\n"
"Each tool store it's own set of such data."
msgstr ""
"The data used for creating GCode.\n"
"Each tool store it's own set of such data."

#: flatcamGUI/ObjectUI.py:1205 flatcamGUI/PreferencesUI.py:2810
msgid "Multi-Depth"
msgstr "Multi-Depth"

#: flatcamGUI/ObjectUI.py:1208 flatcamGUI/PreferencesUI.py:2813
msgid ""
"Use multiple passes to limit\n"
"the cut depth in each pass. Will\n"
"cut multiple times until Cut Z is\n"
"reached."
msgstr ""
"Use multiple passes to limit\n"
"the cut depth in each pass. Will\n"
"cut multiple times until Cut Z is\n"
"reached."

#: flatcamGUI/ObjectUI.py:1219
msgid "Depth of each pass (positive)."
msgstr "Depth of each pass (positive)."

#: flatcamGUI/ObjectUI.py:1229 flatcamGUI/PreferencesUI.py:2840
msgid ""
"Height of the tool when\n"
"moving without cutting."
msgstr ""
"Height of the tool when\n"
"moving without cutting."

#: flatcamGUI/ObjectUI.py:1248 flatcamGUI/PreferencesUI.py:2851
msgid ""
"Include tool-change sequence\n"
"in the Machine Code (Pause for tool change)."
msgstr ""
"Include tool-change sequence\n"
"in the Machine Code (Pause for tool change)."

#: flatcamGUI/ObjectUI.py:1281 flatcamGUI/PreferencesUI.py:2882
msgid "Feed Rate X-Y"
msgstr "Feed Rate X-Y"

#: flatcamGUI/ObjectUI.py:1283 flatcamGUI/PreferencesUI.py:2884
msgid ""
"Cutting speed in the XY\n"
"plane in units per minute"
msgstr ""
"Cutting speed in the XY\n"
"plane in units per minute"

#: flatcamGUI/ObjectUI.py:1291 flatcamGUI/PreferencesUI.py:2892
msgid "Feed Rate Z"
msgstr "Feed Rate Z"

#: flatcamGUI/ObjectUI.py:1293 flatcamGUI/PreferencesUI.py:2894
msgid ""
"Cutting speed in the XY\n"
"plane in units per minute.\n"
"It is called also Plunge."
msgstr ""
"Cutting speed in the XY\n"
"plane in units per minute.\n"
"It is called also Plunge."

#: flatcamGUI/ObjectUI.py:1302 flatcamGUI/PreferencesUI.py:2987
msgid "Feed Rate Rapids"
msgstr "Feed Rate Rapids"

#: flatcamGUI/ObjectUI.py:1304 flatcamGUI/PreferencesUI.py:2989
msgid ""
"Cutting speed in the XY plane\n"
"(in units per minute).\n"
"This is for the rapid move G00.\n"
"It is useful only for Marlin,\n"
"ignore for any other cases."
msgstr ""
"Cutting speed in the XY plane\n"
"(in units per minute).\n"
"This is for the rapid move G00.\n"
"It is useful only for Marlin,\n"
"ignore for any other cases."

#: flatcamGUI/ObjectUI.py:1318 flatcamGUI/PreferencesUI.py:3000
msgid "Re-cut 1st pt."
msgstr "Re-cut 1st pt."

#: flatcamGUI/ObjectUI.py:1320 flatcamGUI/PreferencesUI.py:3002
msgid ""
"In order to remove possible\n"
"copper leftovers where first cut\n"
"meet with last cut, we generate an\n"
"extended cut over the first cut section."
msgstr ""
"In order to remove possible\n"
"copper leftovers where first cut\n"
"meet with last cut, we generate an\n"
"extended cut over the first cut section."

#: flatcamGUI/ObjectUI.py:1331 flatcamGUI/PreferencesUI.py:2906
msgid ""
"Speed of the spindle in RPM (optional).\n"
"If LASER postprocessor is used,\n"
"this value is the power of laser."
msgstr ""
"Speed of the spindle in RPM (optional).\n"
"If LASER postprocessor is used,\n"
"this value is the power of laser."

#: flatcamGUI/ObjectUI.py:1358 flatcamGUI/PreferencesUI.py:4579
#: flatcamTools/ToolSolderPaste.py:276
msgid "PostProcessor"
msgstr "PostProcessor"

#: flatcamGUI/ObjectUI.py:1360 flatcamGUI/PreferencesUI.py:2935
msgid ""
"The Postprocessor file that dictates\n"
"the Machine Code (like GCode, RML, HPGL) output."
msgstr ""
"The Postprocessor file that dictates\n"
"the Machine Code (like GCode, RML, HPGL) output."

#: flatcamGUI/ObjectUI.py:1393
msgid ""
"Add at least one tool in the tool-table.\n"
"Click the header to select all, or Ctrl + LMB\n"
"for custom selection of tools."
msgstr ""
"Add at least one tool in the tool-table.\n"
"Click the header to select all, or Ctrl + LMB\n"
"for custom selection of tools."

#: flatcamGUI/ObjectUI.py:1400
msgid "Generate"
msgstr "Generate"

#: flatcamGUI/ObjectUI.py:1402
msgid "Generate the CNC Job object."
msgstr "Generate the CNC Job object."

#: flatcamGUI/ObjectUI.py:1409
msgid "Paint Area"
msgstr "Paint Area"

#: flatcamGUI/ObjectUI.py:1412 flatcamGUI/PreferencesUI.py:3864
msgid ""
"Creates tool paths to cover the\n"
"whole area of a polygon (remove\n"
"all copper). You will be asked\n"
"to click on the desired polygon."
msgstr ""
"Creates tool paths to cover the\n"
"whole area of a polygon (remove\n"
"all copper). You will be asked\n"
"to click on the desired polygon."

#: flatcamGUI/ObjectUI.py:1423
msgid "Launch Paint Tool in Tools Tab."
msgstr "Launch Paint Tool in Tools Tab."

#: flatcamGUI/ObjectUI.py:1439
msgid "CNC Job Object"
msgstr "CNC Job Object"

#: flatcamGUI/ObjectUI.py:1457 flatcamGUI/PreferencesUI.py:3148
msgid "Plot kind"
msgstr "Plot kind"

#: flatcamGUI/ObjectUI.py:1460 flatcamGUI/PreferencesUI.py:3150
msgid ""
"This selects the kind of geometries on the canvas to plot.\n"
"Those can be either of type 'Travel' which means the moves\n"
"above the work piece or it can be of type 'Cut',\n"
"which means the moves that cut into the material."
msgstr ""
"This selects the kind of geometries on the canvas to plot.\n"
"Those can be either of type 'Travel' which means the moves\n"
"above the work piece or it can be of type 'Cut',\n"
"which means the moves that cut into the material."

#: flatcamGUI/ObjectUI.py:1469 flatcamGUI/PreferencesUI.py:3158
msgid "Travel"
msgstr "Travel"

#: flatcamGUI/ObjectUI.py:1473 flatcamGUI/PreferencesUI.py:3167
msgid "Display Annotation"
msgstr "Display Annotation"

#: flatcamGUI/ObjectUI.py:1475 flatcamGUI/PreferencesUI.py:3169
msgid ""
"This selects if to display text annotation on the plot.\n"
"When checked it will display numbers in order for each end\n"
"of a travel line."
msgstr ""
"This selects if to display text annotation on the plot.\n"
"When checked it will display numbers in order for each end\n"
"of a travel line."

#: flatcamGUI/ObjectUI.py:1490
msgid "Travelled dist."
msgstr "Travelled dist."

#: flatcamGUI/ObjectUI.py:1492 flatcamGUI/ObjectUI.py:1497
msgid ""
"This is the total travelled distance on X-Y plane.\n"
"In current units."
msgstr ""
"This is the total travelled distance on X-Y plane.\n"
"In current units."

#: flatcamGUI/ObjectUI.py:1502
msgid "Estimated time"
msgstr "Estimated time"

#: flatcamGUI/ObjectUI.py:1504 flatcamGUI/ObjectUI.py:1509
msgid ""
"This is the estimated time to do the routing/drilling,\n"
"without the time spent in ToolChange events."
msgstr ""
"This is the estimated time to do the routing/drilling,\n"
"without the time spent in ToolChange events."

#: flatcamGUI/ObjectUI.py:1544
msgid "CNC Tools Table"
msgstr "CNC Tools Table"

#: flatcamGUI/ObjectUI.py:1547
msgid ""
"Tools in this CNCJob object used for cutting.\n"
"The tool diameter is used for plotting on canvas.\n"
"The 'Offset' entry will set an offset for the cut.\n"
"'Offset' can be inside, outside, on path (none) and custom.\n"
"'Type' entry is only informative and it allow to know the \n"
"intent of using the current tool. \n"
"It can be Rough(ing), Finish(ing) or Iso(lation).\n"
"The 'Tool type'(TT) can be circular with 1 to 4 teeths(C1..C4),\n"
"ball(B), or V-Shaped(V)."
msgstr ""
"Tools in this CNCJob object used for cutting.\n"
"The tool diameter is used for plotting on canvas.\n"
"The 'Offset' entry will set an offset for the cut.\n"
"'Offset' can be inside, outside, on path (none) and custom.\n"
"'Type' entry is only informative and it allow to know the \n"
"intent of using the current tool. \n"
"It can be Rough(ing), Finish(ing) or Iso(lation).\n"
"The 'Tool type'(TT) can be circular with 1 to 4 teeths(C1..C4),\n"
"ball(B), or V-Shaped(V)."

#: flatcamGUI/ObjectUI.py:1579
msgid "P"
msgstr "P"

#: flatcamGUI/ObjectUI.py:1585
msgid "Update Plot"
msgstr "Update Plot"

#: flatcamGUI/ObjectUI.py:1587
msgid "Update the plot."
msgstr "Update the plot."

#: flatcamGUI/ObjectUI.py:1594 flatcamGUI/PreferencesUI.py:3306
msgid "Export CNC Code"
msgstr "Export CNC Code"

#: flatcamGUI/ObjectUI.py:1596 flatcamGUI/PreferencesUI.py:3257
#: flatcamGUI/PreferencesUI.py:3308
msgid ""
"Export and save G-Code to\n"
"make this object to a file."
msgstr ""
"Export and save G-Code to\n"
"make this object to a file."

#: flatcamGUI/ObjectUI.py:1602
msgid "Prepend to CNC Code"
msgstr "Prepend to CNC Code"

#: flatcamGUI/ObjectUI.py:1604 flatcamGUI/PreferencesUI.py:3273
msgid ""
"Type here any G-Code commands you would\n"
"like to add at the beginning of the G-Code file."
msgstr ""
"Type here any G-Code commands you would\n"
"like to add at the beginning of the G-Code file."

#: flatcamGUI/ObjectUI.py:1613
msgid "Append to CNC Code"
msgstr "Append to CNC Code"

#: flatcamGUI/ObjectUI.py:1615 flatcamGUI/PreferencesUI.py:3285
msgid ""
"Type here any G-Code commands you would\n"
"like to append to the generated file.\n"
"I.e.: M2 (End of program)"
msgstr ""
"Type here any G-Code commands you would\n"
"like to append to the generated file.\n"
"I.e.: M2 (End of program)"

#: flatcamGUI/ObjectUI.py:1632 flatcamGUI/PreferencesUI.py:3314
msgid "Toolchange G-Code"
msgstr "Toolchange G-Code"

#: flatcamGUI/ObjectUI.py:1635 flatcamGUI/PreferencesUI.py:3317
msgid ""
"Type here any G-Code commands you would\n"
"like to be executed when Toolchange event is encountered.\n"
"This will constitute a Custom Toolchange GCode,\n"
"or a Toolchange Macro.\n"
"The FlatCAM variables are surrounded by '%' symbol.\n"
"\n"
"WARNING: it can be used only with a postprocessor file\n"
"that has 'toolchange_custom' in it's name and this is built\n"
"having as template the 'Toolchange Custom' posprocessor file."
msgstr ""
"Type here any G-Code commands you would\n"
"like to be executed when Toolchange event is encountered.\n"
"This will constitute a Custom Toolchange GCode,\n"
"or a Toolchange Macro.\n"
"The FlatCAM variables are surrounded by '%' symbol.\n"
"\n"
"WARNING: it can be used only with a postprocessor file\n"
"that has 'toolchange_custom' in it's name and this is built\n"
"having as template the 'Toolchange Custom' posprocessor file."

#: flatcamGUI/ObjectUI.py:1654 flatcamGUI/PreferencesUI.py:3345
msgid "Use Toolchange Macro"
msgstr "Use Toolchange Macro"

#: flatcamGUI/ObjectUI.py:1656 flatcamGUI/PreferencesUI.py:3347
msgid ""
"Check this box if you want to use\n"
"a Custom Toolchange GCode (macro)."
msgstr ""
"Check this box if you want to use\n"
"a Custom Toolchange GCode (macro)."

#: flatcamGUI/ObjectUI.py:1664 flatcamGUI/PreferencesUI.py:3359
msgid ""
"A list of the FlatCAM variables that can be used\n"
"in the Toolchange event.\n"
"They have to be surrounded by the '%' symbol"
msgstr ""
"A list of the FlatCAM variables that can be used\n"
"in the Toolchange event.\n"
"They have to be surrounded by the '%' symbol"

#: flatcamGUI/ObjectUI.py:1671 flatcamGUI/PreferencesUI.py:1585
#: flatcamGUI/PreferencesUI.py:2484 flatcamGUI/PreferencesUI.py:3087
#: flatcamGUI/PreferencesUI.py:3366 flatcamGUI/PreferencesUI.py:3445
#: flatcamGUI/PreferencesUI.py:3704 flatcamGUI/PreferencesUI.py:3803
#: flatcamGUI/PreferencesUI.py:4014 flatcamGUI/PreferencesUI.py:4095
#: flatcamGUI/PreferencesUI.py:4294 flatcamGUI/PreferencesUI.py:4426
#: flatcamGUI/PreferencesUI.py:4599 flatcamTools/ToolNonCopperClear.py:274
msgid "Parameters"
msgstr "Parameters"

#: flatcamGUI/ObjectUI.py:1674 flatcamGUI/PreferencesUI.py:3369
msgid "FlatCAM CNC parameters"
msgstr "FlatCAM CNC parameters"

#: flatcamGUI/ObjectUI.py:1675
msgid "tool = tool number"
msgstr "tool = tool number"

#: flatcamGUI/ObjectUI.py:1676
msgid "tooldia = tool diameter"
msgstr "tooldia = tool diameter"

#: flatcamGUI/ObjectUI.py:1677
msgid "t_drills = for Excellon, total number of drills"
msgstr "t_drills = for Excellon, total number of drills"

#: flatcamGUI/ObjectUI.py:1678
msgid "x_toolchange = X coord for Toolchange"
msgstr "x_toolchange = X coord for Toolchange"

#: flatcamGUI/ObjectUI.py:1679 flatcamGUI/PreferencesUI.py:3375
msgid "y_toolchange = Y coord for Toolchange"
msgstr "y_toolchange = Y coord for Toolchange"

#: flatcamGUI/ObjectUI.py:1680
msgid "z_toolchange = Z coord for Toolchange"
msgstr "z_toolchange = Z coord for Toolchange"

#: flatcamGUI/ObjectUI.py:1681
msgid "z_cut = depth where to cut"
msgstr "z_cut = depth where to cut"

#: flatcamGUI/ObjectUI.py:1682
msgid "z_move = height where to travel"
msgstr "z_move = height where to travel"

#: flatcamGUI/ObjectUI.py:1683
msgid "z_depthpercut = the step value for multidepth cut"
msgstr "z_depthpercut = the step value for multidepth cut"

#: flatcamGUI/ObjectUI.py:1684
msgid "spindlesspeed = the value for the spindle speed"
msgstr "spindlesspeed = the value for the spindle speed"

#: flatcamGUI/ObjectUI.py:1685 flatcamGUI/PreferencesUI.py:3385
msgid "dwelltime = time to dwell to allow the spindle to reach it's set RPM"
msgstr "dwelltime = time to dwell to allow the spindle to reach it's set RPM"

#: flatcamGUI/ObjectUI.py:1701
msgid "View CNC Code"
msgstr "View CNC Code"

#: flatcamGUI/ObjectUI.py:1703
msgid ""
"Opens TAB to view/modify/print G-Code\n"
"file."
msgstr ""
"Opens TAB to view/modify/print G-Code\n"
"file."

#: flatcamGUI/ObjectUI.py:1708
msgid "Save CNC Code"
msgstr "Save CNC Code"

#: flatcamGUI/ObjectUI.py:1710
msgid ""
"Opens dialog to save G-Code\n"
"file."
msgstr ""
"Opens dialog to save G-Code\n"
"file."

#: flatcamGUI/ObjectUI.py:1730
#| msgid "Edit Object\tE"
msgid "Script Object"
msgstr "Script Object"

#: flatcamGUI/ObjectUI.py:1749 flatcamGUI/ObjectUI.py:1808
#| msgid "Autocompleter Keywords"
msgid "Auto Completer"
msgstr "Auto Completer"

#: flatcamGUI/ObjectUI.py:1751
msgid "This selects if the auto completer is enabled in the Script Editor."
msgstr "This selects if the auto completer is enabled in the Script Editor."

#: flatcamGUI/ObjectUI.py:1782
#| msgid "Geometry Object"
msgid "Document Object"
msgstr "Document Object"

#: flatcamGUI/ObjectUI.py:1810
msgid "This selects if the auto completer is enabled in the Document Editor."
msgstr "This selects if the auto completer is enabled in the Document Editor."

#: flatcamGUI/ObjectUI.py:1828
#| msgid "Box Type"
msgid "Font Type"
msgstr "Font Type"

#: flatcamGUI/ObjectUI.py:1845
#| msgid "NB Font Size"
msgid "Font Size"
msgstr "Font Size"

#: flatcamGUI/ObjectUI.py:1881
msgid "Alignment"
msgstr "Alignment"

#: flatcamGUI/ObjectUI.py:1886
msgid "Align Left"
msgstr "Align Left"

#: flatcamGUI/ObjectUI.py:1891
msgid "Center"
msgstr "Center"

#: flatcamGUI/ObjectUI.py:1896
msgid "Align Right"
msgstr "Align Right"

#: flatcamGUI/ObjectUI.py:1901
msgid "Justify"
msgstr "Justify"

#: flatcamGUI/ObjectUI.py:1908
#| msgid "Film Color"
msgid "Font Color"
msgstr "Font Color"

#: flatcamGUI/ObjectUI.py:1910
#| msgid "Set the font color for the annotation texts."
msgid "Set the font color for the selected text"
msgstr "Set the font color for the selected text"

#: flatcamGUI/ObjectUI.py:1924
#| msgid "Selection"
msgid "Selection Color"
msgstr "Selection Color"

#: flatcamGUI/ObjectUI.py:1926
#| msgid "Set the line color for the 'right to left' selection box."
msgid "Set the selection color when doing text selection."
msgstr "Set the selection color when doing text selection."

#: flatcamGUI/ObjectUI.py:1940
#| msgid "Size"
msgid "Tab Size"
msgstr "Tab Size"

#: flatcamGUI/ObjectUI.py:1942
msgid "Set the tab size. In pixels. Default value is 80 pixels."
msgstr "Set the tab size. In pixels. Default value is 80 pixels."

#: flatcamGUI/PlotCanvasLegacy.py:1082
msgid ""
"Could not annotate due of a difference between the number of text elements "
"and the number of text positions."
msgstr ""
"Could not annotate due of a difference between the number of text elements "
"and the number of text positions."

#: flatcamGUI/PreferencesUI.py:257
msgid "GUI Preferences"
msgstr "GUI Preferences"

#: flatcamGUI/PreferencesUI.py:263
msgid "Grid X value"
msgstr "Grid X value"

#: flatcamGUI/PreferencesUI.py:265
msgid "This is the Grid snap value on X axis."
msgstr "This is the Grid snap value on X axis."

#: flatcamGUI/PreferencesUI.py:270
msgid "Grid Y value"
msgstr "Grid Y value"

#: flatcamGUI/PreferencesUI.py:272
msgid "This is the Grid snap value on Y axis."
msgstr "This is the Grid snap value on Y axis."

#: flatcamGUI/PreferencesUI.py:277
msgid "Snap Max"
msgstr "Snap Max"

#: flatcamGUI/PreferencesUI.py:282
msgid "Workspace"
msgstr "Workspace"

#: flatcamGUI/PreferencesUI.py:284
msgid ""
"Draw a delimiting rectangle on canvas.\n"
"The purpose is to illustrate the limits for our work."
msgstr ""
"Draw a delimiting rectangle on canvas.\n"
"The purpose is to illustrate the limits for our work."

#: flatcamGUI/PreferencesUI.py:287
msgid "Wk. format"
msgstr "Wk. format"

#: flatcamGUI/PreferencesUI.py:289
msgid ""
"Select the type of rectangle to be used on canvas,\n"
"as valid workspace."
msgstr ""
"Select the type of rectangle to be used on canvas,\n"
"as valid workspace."

#: flatcamGUI/PreferencesUI.py:302
msgid "Plot Fill"
msgstr "Plot Fill"

#: flatcamGUI/PreferencesUI.py:304
msgid ""
"Set the fill color for plotted objects.\n"
"First 6 digits are the color and the last 2\n"
"digits are for alpha (transparency) level."
msgstr ""
"Set the fill color for plotted objects.\n"
"First 6 digits are the color and the last 2\n"
"digits are for alpha (transparency) level."

#: flatcamGUI/PreferencesUI.py:318 flatcamGUI/PreferencesUI.py:368
#: flatcamGUI/PreferencesUI.py:418
msgid "Alpha Level"
msgstr "Alpha Level"

#: flatcamGUI/PreferencesUI.py:320
msgid "Set the fill transparency for plotted objects."
msgstr "Set the fill transparency for plotted objects."

#: flatcamGUI/PreferencesUI.py:337
msgid "Plot Line"
msgstr "Plot Line"

#: flatcamGUI/PreferencesUI.py:339
msgid "Set the line color for plotted objects."
msgstr "Set the line color for plotted objects."

#: flatcamGUI/PreferencesUI.py:351
msgid "Sel. Fill"
msgstr "Sel. Fill"

#: flatcamGUI/PreferencesUI.py:353
msgid ""
"Set the fill color for the selection box\n"
"in case that the selection is done from left to right.\n"
"First 6 digits are the color and the last 2\n"
"digits are for alpha (transparency) level."
msgstr ""
"Set the fill color for the selection box\n"
"in case that the selection is done from left to right.\n"
"First 6 digits are the color and the last 2\n"
"digits are for alpha (transparency) level."

#: flatcamGUI/PreferencesUI.py:370
msgid "Set the fill transparency for the 'left to right' selection box."
msgstr "Set the fill transparency for the 'left to right' selection box."

#: flatcamGUI/PreferencesUI.py:387
msgid "Sel. Line"
msgstr "Sel. Line"

#: flatcamGUI/PreferencesUI.py:389
msgid "Set the line color for the 'left to right' selection box."
msgstr "Set the line color for the 'left to right' selection box."

#: flatcamGUI/PreferencesUI.py:401
msgid "Sel2. Fill"
msgstr "Sel2. Fill"

#: flatcamGUI/PreferencesUI.py:403
msgid ""
"Set the fill color for the selection box\n"
"in case that the selection is done from right to left.\n"
"First 6 digits are the color and the last 2\n"
"digits are for alpha (transparency) level."
msgstr ""
"Set the fill color for the selection box\n"
"in case that the selection is done from right to left.\n"
"First 6 digits are the color and the last 2\n"
"digits are for alpha (transparency) level."

#: flatcamGUI/PreferencesUI.py:420
msgid "Set the fill transparency for selection 'right to left' box."
msgstr "Set the fill transparency for selection 'right to left' box."

#: flatcamGUI/PreferencesUI.py:437
msgid "Sel2. Line"
msgstr "Sel2. Line"

#: flatcamGUI/PreferencesUI.py:439
msgid "Set the line color for the 'right to left' selection box."
msgstr "Set the line color for the 'right to left' selection box."

#: flatcamGUI/PreferencesUI.py:451
msgid "Editor Draw"
msgstr "Editor Draw"

#: flatcamGUI/PreferencesUI.py:453
msgid "Set the color for the shape."
msgstr "Set the color for the shape."

#: flatcamGUI/PreferencesUI.py:465
msgid "Editor Draw Sel."
msgstr "Editor Draw Sel."

#: flatcamGUI/PreferencesUI.py:467
msgid "Set the color of the shape when selected."
msgstr "Set the color of the shape when selected."

#: flatcamGUI/PreferencesUI.py:479
msgid "Project Items"
msgstr "Project Items"

#: flatcamGUI/PreferencesUI.py:481
msgid "Set the color of the items in Project Tab Tree."
msgstr "Set the color of the items in Project Tab Tree."

#: flatcamGUI/PreferencesUI.py:492
msgid "Proj. Dis. Items"
msgstr "Proj. Dis. Items"

#: flatcamGUI/PreferencesUI.py:494
msgid ""
"Set the color of the items in Project Tab Tree,\n"
"for the case when the items are disabled."
msgstr ""
"Set the color of the items in Project Tab Tree,\n"
"for the case when the items are disabled."

#: flatcamGUI/PreferencesUI.py:507
msgid "Activity Icon"
msgstr "Activity Icon"

#: flatcamGUI/PreferencesUI.py:509
msgid "Select the GIF that show activity when FlatCAM is active."
msgstr "Select the GIF that show activity when FlatCAM is active."

#: flatcamGUI/PreferencesUI.py:555
msgid "GUI Settings"
msgstr "GUI Settings"

#: flatcamGUI/PreferencesUI.py:568
msgid "Theme"
msgstr "Theme"

#: flatcamGUI/PreferencesUI.py:570
#| msgid ""
#| "Select an style for FlatCAM.\n"
#| "It will be applied at the next app start."
msgid ""
"Select a theme for FlatCAM.\n"
"The application will restart after change."
msgstr ""
"Select a theme for FlatCAM.\n"
"The application will restart after change."

#: flatcamGUI/PreferencesUI.py:574
msgid "White"
msgstr "White"

#: flatcamGUI/PreferencesUI.py:575
msgid "Dark"
msgstr "Dark"

#: flatcamGUI/PreferencesUI.py:582
msgid "Layout"
msgstr "Layout"

#: flatcamGUI/PreferencesUI.py:584
msgid ""
"Select an layout for FlatCAM.\n"
"It is applied immediately."
msgstr ""
"Select an layout for FlatCAM.\n"
"It is applied immediately."

#: flatcamGUI/PreferencesUI.py:603
msgid "Style"
msgstr "Style"

#: flatcamGUI/PreferencesUI.py:605
msgid ""
"Select an style for FlatCAM.\n"
"It will be applied at the next app start."
msgstr ""
"Select an style for FlatCAM.\n"
"It will be applied at the next app start."

#: flatcamGUI/PreferencesUI.py:619
msgid "HDPI Support"
msgstr "HDPI Support"

#: flatcamGUI/PreferencesUI.py:621
msgid ""
"Enable High DPI support for FlatCAM.\n"
"It will be applied at the next app start."
msgstr ""
"Enable High DPI support for FlatCAM.\n"
"It will be applied at the next app start."

#: flatcamGUI/PreferencesUI.py:637 flatcamGUI/PreferencesUI.py:887
msgid "Clear GUI Settings"
msgstr "Clear GUI Settings"

#: flatcamGUI/PreferencesUI.py:639
msgid ""
"Clear the GUI settings for FlatCAM,\n"
"such as: layout, gui state, style, hdpi support etc."
msgstr ""
"Clear the GUI settings for FlatCAM,\n"
"such as: layout, gui state, style, hdpi support etc."

#: flatcamGUI/PreferencesUI.py:649
msgid "Hover Shape"
msgstr "Hover Shape"

#: flatcamGUI/PreferencesUI.py:651
msgid ""
"Enable display of a hover shape for FlatCAM objects.\n"
"It is displayed whenever the mouse cursor is hovering\n"
"over any kind of not-selected object."
msgstr ""
"Enable display of a hover shape for FlatCAM objects.\n"
"It is displayed whenever the mouse cursor is hovering\n"
"over any kind of not-selected object."

#: flatcamGUI/PreferencesUI.py:661
msgid "Sel. Shape"
msgstr "Sel. Shape"

#: flatcamGUI/PreferencesUI.py:663
msgid ""
"Enable the display of a selection shape for FlatCAM objects.\n"
"It is displayed whenever the mouse selects an object\n"
"either by clicking or dragging mouse from left to right or\n"
"right to left."
msgstr ""
"Enable the display of a selection shape for FlatCAM objects.\n"
"It is displayed whenever the mouse selects an object\n"
"either by clicking or dragging mouse from left to right or\n"
"right to left."

#: flatcamGUI/PreferencesUI.py:676
msgid "NB Font Size"
msgstr "NB Font Size"

#: flatcamGUI/PreferencesUI.py:678
msgid ""
"This sets the font size for the elements found in the Notebook.\n"
"The notebook is the collapsible area in the left side of the GUI,\n"
"and include the Project, Selected and Tool tabs."
msgstr ""
"This sets the font size for the elements found in the Notebook.\n"
"The notebook is the collapsible area in the left side of the GUI,\n"
"and include the Project, Selected and Tool tabs."

#: flatcamGUI/PreferencesUI.py:697
msgid "Axis Font Size"
msgstr "Axis Font Size"

#: flatcamGUI/PreferencesUI.py:699
msgid "This sets the font size for canvas axis."
msgstr "This sets the font size for canvas axis."

#: flatcamGUI/PreferencesUI.py:716
msgid "Textbox Font Size"
msgstr "Textbox Font Size"

#: flatcamGUI/PreferencesUI.py:718
msgid ""
"This sets the font size for the Textbox GUI\n"
"elements that are used in FlatCAM."
msgstr ""
"This sets the font size for the Textbox GUI\n"
"elements that are used in FlatCAM."

#: flatcamGUI/PreferencesUI.py:739
msgid "Splash Screen"
msgstr "Splash Screen"

#: flatcamGUI/PreferencesUI.py:741
msgid "Enable display of the splash screen at application startup."
msgstr "Enable display of the splash screen at application startup."

#: flatcamGUI/PreferencesUI.py:754
msgid "Sys Tray Icon"
msgstr "Sys Tray Icon"

#: flatcamGUI/PreferencesUI.py:756
msgid "Enable display of FlatCAM icon in Sys Tray."
msgstr "Enable display of FlatCAM icon in Sys Tray."

#: flatcamGUI/PreferencesUI.py:764
msgid "Shell at StartUp"
msgstr "Shell at StartUp"

#: flatcamGUI/PreferencesUI.py:766 flatcamGUI/PreferencesUI.py:771
msgid ""
"Check this box if you want the shell to\n"
"start automatically at startup."
msgstr ""
"Check this box if you want the shell to\n"
"start automatically at startup."

#: flatcamGUI/PreferencesUI.py:779
msgid "Project at StartUp"
msgstr "Project at StartUp"

#: flatcamGUI/PreferencesUI.py:781 flatcamGUI/PreferencesUI.py:786
msgid ""
"Check this box if you want the project/selected/tool tab area to\n"
"to be shown automatically at startup."
msgstr ""
"Check this box if you want the project/selected/tool tab area to\n"
"to be shown automatically at startup."

#: flatcamGUI/PreferencesUI.py:794
msgid "Project AutoHide"
msgstr "Project AutoHide"

#: flatcamGUI/PreferencesUI.py:796 flatcamGUI/PreferencesUI.py:802
msgid ""
"Check this box if you want the project/selected/tool tab area to\n"
"hide automatically when there are no objects loaded and\n"
"to show whenever a new object is created."
msgstr ""
"Check this box if you want the project/selected/tool tab area to\n"
"hide automatically when there are no objects loaded and\n"
"to show whenever a new object is created."

#: flatcamGUI/PreferencesUI.py:813
msgid "Enable ToolTips"
msgstr "Enable ToolTips"

#: flatcamGUI/PreferencesUI.py:815 flatcamGUI/PreferencesUI.py:820
msgid ""
"Check this box if you want to have toolTips displayed\n"
"when hovering with mouse over items throughout the App."
msgstr ""
"Check this box if you want to have toolTips displayed\n"
"when hovering with mouse over items throughout the App."

#: flatcamGUI/PreferencesUI.py:828
msgid "Mouse Cursor"
msgstr "Mouse Cursor"

#: flatcamGUI/PreferencesUI.py:830
msgid ""
"Choose a mouse cursor shape.\n"
"- Small -> with a customizable size.\n"
"- Big -> Infinite lines"
msgstr ""
"Choose a mouse cursor shape.\n"
"- Small -> with a customizable size.\n"
"- Big -> Infinite lines"

#: flatcamGUI/PreferencesUI.py:836
msgid "Small"
msgstr "Small"

#: flatcamGUI/PreferencesUI.py:837
msgid "Big"
msgstr "Big"

#: flatcamGUI/PreferencesUI.py:843
msgid "Mouse Cursor Size"
msgstr "Mouse Cursor Size"

#: flatcamGUI/PreferencesUI.py:845
#| msgid "The font size of the annotation text. In pixels."
msgid "Set the size of the mouse cursor, in pixels."
msgstr "Set the size of the mouse cursor, in pixels."

#: flatcamGUI/PreferencesUI.py:856
msgid "Delete object confirmation"
msgstr "Delete object confirmation"

#: flatcamGUI/PreferencesUI.py:858
msgid ""
"When checked the application will ask for user confirmation\n"
"whenever the Delete object(s) event is triggered, either by\n"
"menu shortcut or key shortcut."
msgstr ""
"When checked the application will ask for user confirmation\n"
"whenever the Delete object(s) event is triggered, either by\n"
"menu shortcut or key shortcut."

#: flatcamGUI/PreferencesUI.py:884
msgid "Are you sure you want to delete the GUI Settings? \n"
msgstr "Are you sure you want to delete the GUI Settings? \n"

#: flatcamGUI/PreferencesUI.py:908
msgid "App Preferences"
msgstr "App Preferences"

#: flatcamGUI/PreferencesUI.py:914 flatcamGUI/PreferencesUI.py:1179
#: flatcamGUI/PreferencesUI.py:1502 flatcamGUI/PreferencesUI.py:2345
#: flatcamTools/ToolDistance.py:43 flatcamTools/ToolDistanceMin.py:45
#: flatcamTools/ToolPcbWizard.py:127 flatcamTools/ToolProperties.py:133
msgid "Units"
msgstr "Units"

#: flatcamGUI/PreferencesUI.py:915
msgid ""
"The default value for FlatCAM units.\n"
"Whatever is selected here is set every time\n"
"FLatCAM is started."
msgstr ""
"The default value for FlatCAM units.\n"
"Whatever is selected here is set every time\n"
"FLatCAM is started."

#: flatcamGUI/PreferencesUI.py:918
msgid "IN"
msgstr "IN"

#: flatcamGUI/PreferencesUI.py:919 flatcamGUI/PreferencesUI.py:1185
#: flatcamGUI/PreferencesUI.py:1508 flatcamGUI/PreferencesUI.py:1940
#: flatcamGUI/PreferencesUI.py:2351 flatcamTools/ToolCalculators.py:62
#: flatcamTools/ToolPcbWizard.py:126
msgid "MM"
msgstr "MM"

#: flatcamGUI/PreferencesUI.py:922
msgid "Graphic Engine"
msgstr "Graphic Engine"

#: flatcamGUI/PreferencesUI.py:923
msgid ""
"Choose what graphic engine to use in FlatCAM.\n"
"Legacy(2D) -> reduced functionality, slow performance but enhanced "
"compatibility.\n"
"OpenGL(3D) -> full functionality, high performance\n"
"Some graphic cards are too old and do not work in OpenGL(3D) mode, like:\n"
"Intel HD3000 or older. In this case the plot area will be black therefore\n"
"use the Legacy(2D) mode."
msgstr ""
"Choose what graphic engine to use in FlatCAM.\n"
"Legacy(2D) -> reduced functionality, slow performance but enhanced "
"compatibility.\n"
"OpenGL(3D) -> full functionality, high performance\n"
"Some graphic cards are too old and do not work in OpenGL(3D) mode, like:\n"
"Intel HD3000 or older. In this case the plot area will be black therefore\n"
"use the Legacy(2D) mode."

#: flatcamGUI/PreferencesUI.py:929
msgid "Legacy(2D)"
msgstr "Legacy(2D)"

#: flatcamGUI/PreferencesUI.py:930
msgid "OpenGL(3D)"
msgstr "OpenGL(3D)"

#: flatcamGUI/PreferencesUI.py:933
msgid "APP. LEVEL"
msgstr "APP. LEVEL"

#: flatcamGUI/PreferencesUI.py:934
msgid ""
"Choose the default level of usage for FlatCAM.\n"
"BASIC level -> reduced functionality, best for beginner's.\n"
"ADVANCED level -> full functionality.\n"
"\n"
"The choice here will influence the parameters in\n"
"the Selected Tab for all kinds of FlatCAM objects."
msgstr ""
"Choose the default level of usage for FlatCAM.\n"
"BASIC level -> reduced functionality, best for beginner's.\n"
"ADVANCED level -> full functionality.\n"
"\n"
"The choice here will influence the parameters in\n"
"the Selected Tab for all kinds of FlatCAM objects."

#: flatcamGUI/PreferencesUI.py:943
msgid "Portable app"
msgstr "Portable app"

#: flatcamGUI/PreferencesUI.py:944
msgid ""
"Choose if the application should run as portable.\n"
"\n"
"If Checked the application will run portable,\n"
"which means that the preferences files will be saved\n"
"in the application folder, in the lib\\config subfolder."
msgstr ""
"Choose if the application should run as portable.\n"
"\n"
"If Checked the application will run portable,\n"
"which means that the preferences files will be saved\n"
"in the application folder, in the lib\\config subfolder."

#: flatcamGUI/PreferencesUI.py:951
msgid "Languages"
msgstr "Languages"

#: flatcamGUI/PreferencesUI.py:952
msgid "Set the language used throughout FlatCAM."
msgstr "Set the language used throughout FlatCAM."

#: flatcamGUI/PreferencesUI.py:955
msgid "Apply Language"
msgstr "Apply Language"

#: flatcamGUI/PreferencesUI.py:956
msgid ""
"Set the language used throughout FlatCAM.\n"
"The app will restart after click.Windows: When FlatCAM is installed in "
"Program Files\n"
"directory, it is possible that the app will not\n"
"restart after the button is clicked due of Windows\n"
"security features. In this case the language will be\n"
"applied at the next app start."
msgstr ""
"Set the language used throughout FlatCAM.\n"
"The app will restart after click.Windows: When FlatCAM is installed in "
"Program Files\n"
"directory, it is possible that the app will not\n"
"restart after the button is clicked due of Windows\n"
"security features. In this case the language will be\n"
"applied at the next app start."

#: flatcamGUI/PreferencesUI.py:965
msgid "Version Check"
msgstr "Version Check"

#: flatcamGUI/PreferencesUI.py:967 flatcamGUI/PreferencesUI.py:972
msgid ""
"Check this box if you want to check\n"
"for a new version automatically at startup."
msgstr ""
"Check this box if you want to check\n"
"for a new version automatically at startup."

#: flatcamGUI/PreferencesUI.py:977
msgid "Send Stats"
msgstr "Send Stats"

#: flatcamGUI/PreferencesUI.py:979 flatcamGUI/PreferencesUI.py:984
msgid ""
"Check this box if you agree to send anonymous\n"
"stats automatically at startup, to help improve FlatCAM."
msgstr ""
"Check this box if you agree to send anonymous\n"
"stats automatically at startup, to help improve FlatCAM."

#: flatcamGUI/PreferencesUI.py:991
msgid "Pan Button"
msgstr "Pan Button"

#: flatcamGUI/PreferencesUI.py:992
msgid ""
"Select the mouse button to use for panning:\n"
"- MMB --> Middle Mouse Button\n"
"- RMB --> Right Mouse Button"
msgstr ""
"Select the mouse button to use for panning:\n"
"- MMB --> Middle Mouse Button\n"
"- RMB --> Right Mouse Button"

#: flatcamGUI/PreferencesUI.py:995
msgid "MMB"
msgstr "MMB"

#: flatcamGUI/PreferencesUI.py:996
msgid "RMB"
msgstr "RMB"

#: flatcamGUI/PreferencesUI.py:999
msgid "Multiple Sel"
msgstr "Multiple Sel"

#: flatcamGUI/PreferencesUI.py:1000
msgid "Select the key used for multiple selection."
msgstr "Select the key used for multiple selection."

#: flatcamGUI/PreferencesUI.py:1001
msgid "CTRL"
msgstr "CTRL"

#: flatcamGUI/PreferencesUI.py:1002
msgid "SHIFT"
msgstr "SHIFT"

#: flatcamGUI/PreferencesUI.py:1005
msgid "Workers number"
msgstr "Workers number"

#: flatcamGUI/PreferencesUI.py:1007 flatcamGUI/PreferencesUI.py:1016
msgid ""
"The number of Qthreads made available to the App.\n"
"A bigger number may finish the jobs more quickly but\n"
"depending on your computer speed, may make the App\n"
"unresponsive. Can have a value between 2 and 16.\n"
"Default value is 2.\n"
"After change, it will be applied at next App start."
msgstr ""
"The number of Qthreads made available to the App.\n"
"A bigger number may finish the jobs more quickly but\n"
"depending on your computer speed, may make the App\n"
"unresponsive. Can have a value between 2 and 16.\n"
"Default value is 2.\n"
"After change, it will be applied at next App start."

#: flatcamGUI/PreferencesUI.py:1026
msgid "Geo Tolerance"
msgstr "Geo Tolerance"

#: flatcamGUI/PreferencesUI.py:1028 flatcamGUI/PreferencesUI.py:1037
msgid ""
"This value can counter the effect of the Circle Steps\n"
"parameter. Default value is 0.01.\n"
"A lower value will increase the detail both in image\n"
"and in Gcode for the circles, with a higher cost in\n"
"performance. Higher value will provide more\n"
"performance at the expense of level of detail."
msgstr ""
"This value can counter the effect of the Circle Steps\n"
"parameter. Default value is 0.01.\n"
"A lower value will increase the detail both in image\n"
"and in Gcode for the circles, with a higher cost in\n"
"performance. Higher value will provide more\n"
"performance at the expense of level of detail."

#: flatcamGUI/PreferencesUI.py:1074
msgid "\"Open\" behavior"
msgstr "\"Open\" behavior"

#: flatcamGUI/PreferencesUI.py:1076
msgid ""
"When checked the path for the last saved file is used when saving files,\n"
"and the path for the last opened file is used when opening files.\n"
"\n"
"When unchecked the path for opening files is the one used last: either the\n"
"path for saving files or the path for opening files."
msgstr ""
"When checked the path for the last saved file is used when saving files,\n"
"and the path for the last opened file is used when opening files.\n"
"\n"
"When unchecked the path for opening files is the one used last: either the\n"
"path for saving files or the path for opening files."

#: flatcamGUI/PreferencesUI.py:1085
msgid "Save Compressed Project"
msgstr "Save Compressed Project"

#: flatcamGUI/PreferencesUI.py:1087
msgid ""
"Whether to save a compressed or uncompressed project.\n"
"When checked it will save a compressed FlatCAM project."
msgstr ""
"Whether to save a compressed or uncompressed project.\n"
"When checked it will save a compressed FlatCAM project."

#: flatcamGUI/PreferencesUI.py:1098
msgid "Compression Level"
msgstr "Compression Level"

#: flatcamGUI/PreferencesUI.py:1100
msgid ""
"The level of compression used when saving\n"
"a FlatCAM project. Higher value means better compression\n"
"but require more RAM usage and more processing time."
msgstr ""
"The level of compression used when saving\n"
"a FlatCAM project. Higher value means better compression\n"
"but require more RAM usage and more processing time."

#: flatcamGUI/PreferencesUI.py:1127
msgid "Gerber General"
msgstr "Gerber General"

#: flatcamGUI/PreferencesUI.py:1158 flatcamGUI/PreferencesUI.py:2753
#: flatcamGUI/PreferencesUI.py:3183
msgid "Circle Steps"
msgstr "Circle Steps"

#: flatcamGUI/PreferencesUI.py:1160
msgid ""
"The number of circle steps for Gerber \n"
"circular aperture linear approximation."
msgstr ""
"The number of circle steps for Gerber \n"
"circular aperture linear approximation."

#: flatcamGUI/PreferencesUI.py:1170
#| msgid "Defaults"
msgid "Default Values"
msgstr "Default Values"

#: flatcamGUI/PreferencesUI.py:1172
msgid ""
"Those values will be used as fallback values\n"
"in case that they are not found in the Gerber file."
msgstr ""
"Those values will be used as fallback values\n"
"in case that they are not found in the Gerber file."

#: flatcamGUI/PreferencesUI.py:1181 flatcamGUI/PreferencesUI.py:1187
#: flatcamGUI/PreferencesUI.py:1504 flatcamGUI/PreferencesUI.py:1510
msgid "The units used in the Gerber file."
msgstr "The units used in the Gerber file."

#: flatcamGUI/PreferencesUI.py:1184 flatcamGUI/PreferencesUI.py:1507
#: flatcamGUI/PreferencesUI.py:1837 flatcamGUI/PreferencesUI.py:1939
#: flatcamGUI/PreferencesUI.py:2350 flatcamTools/ToolCalculators.py:61
#: flatcamTools/ToolPcbWizard.py:125
msgid "INCH"
msgstr "INCH"

#: flatcamGUI/PreferencesUI.py:1194 flatcamGUI/PreferencesUI.py:1552
#: flatcamGUI/PreferencesUI.py:2420
msgid "Zeros"
msgstr "Zeros"

#: flatcamGUI/PreferencesUI.py:1197 flatcamGUI/PreferencesUI.py:1207
#: flatcamGUI/PreferencesUI.py:1555 flatcamGUI/PreferencesUI.py:1565
msgid ""
"This sets the type of Gerber zeros.\n"
"If LZ then Leading Zeros are removed and\n"
"Trailing Zeros are kept.\n"
"If TZ is checked then Trailing Zeros are removed\n"
"and Leading Zeros are kept."
msgstr ""
"This sets the type of Gerber zeros.\n"
"If LZ then Leading Zeros are removed and\n"
"Trailing Zeros are kept.\n"
"If TZ is checked then Trailing Zeros are removed\n"
"and Leading Zeros are kept."

#: flatcamGUI/PreferencesUI.py:1204 flatcamGUI/PreferencesUI.py:1562
#: flatcamGUI/PreferencesUI.py:1915 flatcamGUI/PreferencesUI.py:2430
#: flatcamTools/ToolPcbWizard.py:111
msgid "LZ"
msgstr "LZ"

#: flatcamGUI/PreferencesUI.py:1205 flatcamGUI/PreferencesUI.py:1563
#: flatcamGUI/PreferencesUI.py:1916 flatcamGUI/PreferencesUI.py:2431
#: flatcamTools/ToolPcbWizard.py:112
msgid "TZ"
msgstr "TZ"

#: flatcamGUI/PreferencesUI.py:1225
msgid "Gerber Options"
msgstr "Gerber Options"

#: flatcamGUI/PreferencesUI.py:1357
msgid "Gerber Adv. Options"
msgstr "Gerber Adv. Options"

#: flatcamGUI/PreferencesUI.py:1360 flatcamGUI/PreferencesUI.py:2216
#: flatcamGUI/PreferencesUI.py:2956
msgid "Advanced Options"
msgstr "Advanced Options"

#: flatcamGUI/PreferencesUI.py:1362
msgid ""
"A list of Gerber advanced parameters.\n"
"Those parameters are available only for\n"
"Advanced App. Level."
msgstr ""
"A list of Gerber advanced parameters.\n"
"Those parameters are available only for\n"
"Advanced App. Level."

#: flatcamGUI/PreferencesUI.py:1381
msgid "Table Show/Hide"
msgstr "Table Show/Hide"

#: flatcamGUI/PreferencesUI.py:1383
msgid ""
"Toggle the display of the Gerber Apertures Table.\n"
"Also, on hide, it will delete all mark shapes\n"
"that are drawn on canvas."
msgstr ""
"Toggle the display of the Gerber Apertures Table.\n"
"Also, on hide, it will delete all mark shapes\n"
"that are drawn on canvas."

#: flatcamGUI/PreferencesUI.py:1445
msgid ""
"Buffering type:\n"
"- None --> best performance, fast file loading but no so good display\n"
"- Full --> slow file loading but good visuals. This is the default.\n"
"<<WARNING>>: Don't change this unless you know what you are doing !!!"
msgstr ""
"Buffering type:\n"
"- None --> best performance, fast file loading but no so good display\n"
"- Full --> slow file loading but good visuals. This is the default.\n"
"<<WARNING>>: Don't change this unless you know what you are doing !!!"

#: flatcamGUI/PreferencesUI.py:1450 flatcamTools/ToolProperties.py:298
#: flatcamTools/ToolProperties.py:312 flatcamTools/ToolProperties.py:315
#: flatcamTools/ToolProperties.py:318
msgid "None"
msgstr "None"

#: flatcamGUI/PreferencesUI.py:1451
msgid "Full"
msgstr "Full"

#: flatcamGUI/PreferencesUI.py:1456
msgid "Simplify"
msgstr "Simplify"

#: flatcamGUI/PreferencesUI.py:1458
#| msgid ""
#| "When checked all the Gerber polygons will be\n"
#| "loaded with simplification having a set tolerance."
msgid ""
"When checked all the Gerber polygons will be\n"
"loaded with simplification having a set tolerance.\n"
"<<WARNING>>: Don't change this unless you know what you are doing !!!"
msgstr ""
"When checked all the Gerber polygons will be\n"
"loaded with simplification having a set tolerance.\n"
"<<WARNING>>: Don't change this unless you know what you are doing !!!"

#: flatcamGUI/PreferencesUI.py:1465
msgid "Tolerance"
msgstr "Tolerance"

#: flatcamGUI/PreferencesUI.py:1466
#| msgid "Tolerance for poligon simplification."
msgid "Tolerance for polygon simplification."
msgstr "Tolerance for polygon simplification."

#: flatcamGUI/PreferencesUI.py:1488
msgid "Gerber Export"
msgstr "Gerber Export"

#: flatcamGUI/PreferencesUI.py:1491 flatcamGUI/PreferencesUI.py:2334
msgid "Export Options"
msgstr "Export Options"

#: flatcamGUI/PreferencesUI.py:1493
msgid ""
"The parameters set here are used in the file exported\n"
"when using the File -> Export -> Export Gerber menu entry."
msgstr ""
"The parameters set here are used in the file exported\n"
"when using the File -> Export -> Export Gerber menu entry."

#: flatcamGUI/PreferencesUI.py:1516 flatcamGUI/PreferencesUI.py:2359
msgid "Int/Decimals"
msgstr "Int/Decimals"

#: flatcamGUI/PreferencesUI.py:1518
msgid ""
"The number of digits in the whole part of the number\n"
"and in the fractional part of the number."
msgstr ""
"The number of digits in the whole part of the number\n"
"and in the fractional part of the number."

#: flatcamGUI/PreferencesUI.py:1529
msgid ""
"This numbers signify the number of digits in\n"
"the whole part of Gerber coordinates."
msgstr ""
"This numbers signify the number of digits in\n"
"the whole part of Gerber coordinates."

#: flatcamGUI/PreferencesUI.py:1543
msgid ""
"This numbers signify the number of digits in\n"
"the decimal part of Gerber coordinates."
msgstr ""
"This numbers signify the number of digits in\n"
"the decimal part of Gerber coordinates."

#: flatcamGUI/PreferencesUI.py:1587
msgid "A list of Gerber Editor parameters."
msgstr "A list of Gerber Editor parameters."

#: flatcamGUI/PreferencesUI.py:1595 flatcamGUI/PreferencesUI.py:2494
#: flatcamGUI/PreferencesUI.py:3097
msgid "Selection limit"
msgstr "Selection limit"

#: flatcamGUI/PreferencesUI.py:1597
msgid ""
"Set the number of selected Gerber geometry\n"
"items above which the utility geometry\n"
"becomes just a selection rectangle.\n"
"Increases the performance when moving a\n"
"large number of geometric elements."
msgstr ""
"Set the number of selected Gerber geometry\n"
"items above which the utility geometry\n"
"becomes just a selection rectangle.\n"
"Increases the performance when moving a\n"
"large number of geometric elements."

#: flatcamGUI/PreferencesUI.py:1609
msgid "New Aperture code"
msgstr "New Aperture code"

#: flatcamGUI/PreferencesUI.py:1621
msgid "New Aperture size"
msgstr "New Aperture size"

#: flatcamGUI/PreferencesUI.py:1623
msgid "Size for the new aperture"
msgstr "Size for the new aperture"

#: flatcamGUI/PreferencesUI.py:1633
msgid "New Aperture type"
msgstr "New Aperture type"

#: flatcamGUI/PreferencesUI.py:1635
msgid ""
"Type for the new aperture.\n"
"Can be 'C', 'R' or 'O'."
msgstr ""
"Type for the new aperture.\n"
"Can be 'C', 'R' or 'O'."

#: flatcamGUI/PreferencesUI.py:1656
msgid "Aperture Dimensions"
msgstr "Aperture Dimensions"

#: flatcamGUI/PreferencesUI.py:1658 flatcamGUI/PreferencesUI.py:2769
#: flatcamGUI/PreferencesUI.py:3457
msgid "Diameters of the cutting tools, separated by ','"
msgstr "Diameters of the cutting tools, separated by ','"

#: flatcamGUI/PreferencesUI.py:1664
msgid "Linear Pad Array"
msgstr "Linear Pad Array"

#: flatcamGUI/PreferencesUI.py:1668 flatcamGUI/PreferencesUI.py:2535
#: flatcamGUI/PreferencesUI.py:2666
msgid "Linear Dir."
msgstr "Linear Dir."

#: flatcamGUI/PreferencesUI.py:1704
msgid "Circular Pad Array"
msgstr "Circular Pad Array"

#: flatcamGUI/PreferencesUI.py:1708 flatcamGUI/PreferencesUI.py:2575
#: flatcamGUI/PreferencesUI.py:2706
msgid "Circular Dir."
msgstr "Circular Dir."

#: flatcamGUI/PreferencesUI.py:1710 flatcamGUI/PreferencesUI.py:2577
#: flatcamGUI/PreferencesUI.py:2708
msgid ""
"Direction for circular array.\n"
"Can be CW = clockwise or CCW = counter clockwise."
msgstr ""
"Direction for circular array.\n"
"Can be CW = clockwise or CCW = counter clockwise."

#: flatcamGUI/PreferencesUI.py:1721 flatcamGUI/PreferencesUI.py:2588
#: flatcamGUI/PreferencesUI.py:2719
msgid "Circ. Angle"
msgstr "Circ. Angle"

#: flatcamGUI/PreferencesUI.py:1736
msgid "Distance at which to buffer the Gerber element."
msgstr "Distance at which to buffer the Gerber element."

#: flatcamGUI/PreferencesUI.py:1743
msgid "Scale Tool"
msgstr "Scale Tool"

#: flatcamGUI/PreferencesUI.py:1749
msgid "Factor to scale the Gerber element."
msgstr "Factor to scale the Gerber element."

#: flatcamGUI/PreferencesUI.py:1760
msgid "Threshold low"
msgstr "Threshold low"

#: flatcamGUI/PreferencesUI.py:1762
msgid "Threshold value under which the apertures are not marked."
msgstr "Threshold value under which the apertures are not marked."

#: flatcamGUI/PreferencesUI.py:1770
msgid "Threshold high"
msgstr "Threshold high"

#: flatcamGUI/PreferencesUI.py:1772
msgid "Threshold value over which the apertures are not marked."
msgstr "Threshold value over which the apertures are not marked."

#: flatcamGUI/PreferencesUI.py:1788
msgid "Excellon General"
msgstr "Excellon General"

#: flatcamGUI/PreferencesUI.py:1810
msgid "Excellon Format"
msgstr "Excellon Format"

#: flatcamGUI/PreferencesUI.py:1812
msgid ""
"The NC drill files, usually named Excellon files\n"
"are files that can be found in different formats.\n"
"Here we set the format used when the provided\n"
"coordinates are not using period.\n"
"\n"
"Possible presets:\n"
"\n"
"PROTEUS 3:3 MM LZ\n"
"DipTrace 5:2 MM TZ\n"
"DipTrace 4:3 MM LZ\n"
"\n"
"EAGLE 3:3 MM TZ\n"
"EAGLE 4:3 MM TZ\n"
"EAGLE 2:5 INCH TZ\n"
"EAGLE 3:5 INCH TZ\n"
"\n"
"ALTIUM 2:4 INCH LZ\n"
"Sprint Layout 2:4 INCH LZ\n"
"KiCAD 3:5 INCH TZ"
msgstr ""
"The NC drill files, usually named Excellon files\n"
"are files that can be found in different formats.\n"
"Here we set the format used when the provided\n"
"coordinates are not using period.\n"
"\n"
"Possible presets:\n"
"\n"
"PROTEUS 3:3 MM LZ\n"
"DipTrace 5:2 MM TZ\n"
"DipTrace 4:3 MM LZ\n"
"\n"
"EAGLE 3:3 MM TZ\n"
"EAGLE 4:3 MM TZ\n"
"EAGLE 2:5 INCH TZ\n"
"EAGLE 3:5 INCH TZ\n"
"\n"
"ALTIUM 2:4 INCH LZ\n"
"Sprint Layout 2:4 INCH LZ\n"
"KiCAD 3:5 INCH TZ"

#: flatcamGUI/PreferencesUI.py:1840
msgid "Default values for INCH are 2:4"
msgstr "Default values for INCH are 2:4"

#: flatcamGUI/PreferencesUI.py:1848 flatcamGUI/PreferencesUI.py:1881
#: flatcamGUI/PreferencesUI.py:2374
msgid ""
"This numbers signify the number of digits in\n"
"the whole part of Excellon coordinates."
msgstr ""
"This numbers signify the number of digits in\n"
"the whole part of Excellon coordinates."

#: flatcamGUI/PreferencesUI.py:1862 flatcamGUI/PreferencesUI.py:1895
#: flatcamGUI/PreferencesUI.py:2388
msgid ""
"This numbers signify the number of digits in\n"
"the decimal part of Excellon coordinates."
msgstr ""
"This numbers signify the number of digits in\n"
"the decimal part of Excellon coordinates."

#: flatcamGUI/PreferencesUI.py:1870
msgid "METRIC"
msgstr "METRIC"

#: flatcamGUI/PreferencesUI.py:1873
msgid "Default values for METRIC are 3:3"
msgstr "Default values for METRIC are 3:3"

#: flatcamGUI/PreferencesUI.py:1904
msgid "Default <b>Zeros</b>"
msgstr "Default <b>Zeros</b>"

#: flatcamGUI/PreferencesUI.py:1907 flatcamGUI/PreferencesUI.py:2423
msgid ""
"This sets the type of Excellon zeros.\n"
"If LZ then Leading Zeros are kept and\n"
"Trailing Zeros are removed.\n"
"If TZ is checked then Trailing Zeros are kept\n"
"and Leading Zeros are removed."
msgstr ""
"This sets the type of Excellon zeros.\n"
"If LZ then Leading Zeros are kept and\n"
"Trailing Zeros are removed.\n"
"If TZ is checked then Trailing Zeros are kept\n"
"and Leading Zeros are removed."

#: flatcamGUI/PreferencesUI.py:1918
msgid ""
"This sets the default type of Excellon zeros.\n"
"If it is not detected in the parsed file the value here\n"
"will be used.If LZ then Leading Zeros are kept and\n"
"Trailing Zeros are removed.\n"
"If TZ is checked then Trailing Zeros are kept\n"
"and Leading Zeros are removed."
msgstr ""
"This sets the default type of Excellon zeros.\n"
"If it is not detected in the parsed file the value here\n"
"will be used.If LZ then Leading Zeros are kept and\n"
"Trailing Zeros are removed.\n"
"If TZ is checked then Trailing Zeros are kept\n"
"and Leading Zeros are removed."

#: flatcamGUI/PreferencesUI.py:1928
msgid "Default <b>Units</b>"
msgstr "Default <b>Units</b>"

#: flatcamGUI/PreferencesUI.py:1931
msgid ""
"This sets the default units of Excellon files.\n"
"If it is not detected in the parsed file the value here\n"
"will be used.Some Excellon files don't have an header\n"
"therefore this parameter will be used."
msgstr ""
"This sets the default units of Excellon files.\n"
"If it is not detected in the parsed file the value here\n"
"will be used.Some Excellon files don't have an header\n"
"therefore this parameter will be used."

#: flatcamGUI/PreferencesUI.py:1942
msgid ""
"This sets the units of Excellon files.\n"
"Some Excellon files don't have an header\n"
"therefore this parameter will be used."
msgstr ""
"This sets the units of Excellon files.\n"
"Some Excellon files don't have an header\n"
"therefore this parameter will be used."

#: flatcamGUI/PreferencesUI.py:1948
msgid "Update Export settings"
msgstr "Update Export settings"

#: flatcamGUI/PreferencesUI.py:1956
msgid "Excellon Optimization"
msgstr "Excellon Optimization"

#: flatcamGUI/PreferencesUI.py:1959
msgid "Algorithm:"
msgstr "Algorithm:"

#: flatcamGUI/PreferencesUI.py:1961 flatcamGUI/PreferencesUI.py:1978
msgid ""
"This sets the optimization type for the Excellon drill path.\n"
"If <<MetaHeuristic>> is checked then Google OR-Tools algorithm with\n"
"MetaHeuristic Guided Local Path is used. Default search time is 3sec.\n"
"If <<Basic>> is checked then Google OR-Tools Basic algorithm is used.\n"
"If <<TSA>> is checked then Travelling Salesman algorithm is used for\n"
"drill path optimization.\n"
"\n"
"If this control is disabled, then FlatCAM works in 32bit mode and it uses\n"
"Travelling Salesman algorithm for path optimization."
msgstr ""
"This sets the optimization type for the Excellon drill path.\n"
"If <<MetaHeuristic>> is checked then Google OR-Tools algorithm with\n"
"MetaHeuristic Guided Local Path is used. Default search time is 3sec.\n"
"If <<Basic>> is checked then Google OR-Tools Basic algorithm is used.\n"
"If <<TSA>> is checked then Travelling Salesman algorithm is used for\n"
"drill path optimization.\n"
"\n"
"If this control is disabled, then FlatCAM works in 32bit mode and it uses\n"
"Travelling Salesman algorithm for path optimization."

#: flatcamGUI/PreferencesUI.py:1973
msgid "MetaHeuristic"
msgstr "MetaHeuristic"

#: flatcamGUI/PreferencesUI.py:1975
msgid "TSA"
msgstr "TSA"

#: flatcamGUI/PreferencesUI.py:1990
msgid "Optimization Time"
msgstr "Optimization Time"

#: flatcamGUI/PreferencesUI.py:1993
msgid ""
"When OR-Tools Metaheuristic (MH) is enabled there is a\n"
"maximum threshold for how much time is spent doing the\n"
"path optimization. This max duration is set here.\n"
"In seconds."
msgstr ""
"When OR-Tools Metaheuristic (MH) is enabled there is a\n"
"maximum threshold for how much time is spent doing the\n"
"path optimization. This max duration is set here.\n"
"In seconds."

#: flatcamGUI/PreferencesUI.py:2036
msgid "Excellon Options"
msgstr "Excellon Options"

#: flatcamGUI/PreferencesUI.py:2041
msgid ""
"Parameters used to create a CNC Job object\n"
"for this drill object."
msgstr ""
"Parameters used to create a CNC Job object\n"
"for this drill object."

#: flatcamGUI/PreferencesUI.py:2079 flatcamGUI/PreferencesUI.py:2860
msgid "Toolchange Z"
msgstr "Toolchange Z"

#: flatcamGUI/PreferencesUI.py:2111
msgid "Spindle Speed"
msgstr "Spindle Speed"

#: flatcamGUI/PreferencesUI.py:2126 flatcamGUI/PreferencesUI.py:2921
msgid "Duration"
msgstr "Duration"

#: flatcamGUI/PreferencesUI.py:2154
msgid ""
"Choose what to use for GCode generation:\n"
"'Drills', 'Slots' or 'Both'.\n"
"When choosing 'Slots' or 'Both', slots will be\n"
"converted to drills."
msgstr ""
"Choose what to use for GCode generation:\n"
"'Drills', 'Slots' or 'Both'.\n"
"When choosing 'Slots' or 'Both', slots will be\n"
"converted to drills."

#: flatcamGUI/PreferencesUI.py:2197
msgid "Defaults"
msgstr "Defaults"

#: flatcamGUI/PreferencesUI.py:2210
msgid "Excellon Adv. Options"
msgstr "Excellon Adv. Options"

#: flatcamGUI/PreferencesUI.py:2218
msgid ""
"A list of Excellon advanced parameters.\n"
"Those parameters are available only for\n"
"Advanced App. Level."
msgstr ""
"A list of Excellon advanced parameters.\n"
"Those parameters are available only for\n"
"Advanced App. Level."

#: flatcamGUI/PreferencesUI.py:2236
msgid "Toolchange X,Y"
msgstr "Toolchange X,Y"

#: flatcamGUI/PreferencesUI.py:2238 flatcamGUI/PreferencesUI.py:2970
msgid "Toolchange X,Y position."
msgstr "Toolchange X,Y position."

#: flatcamGUI/PreferencesUI.py:2286 flatcamGUI/PreferencesUI.py:3029
msgid "Spindle dir."
msgstr "Spindle dir."

#: flatcamGUI/PreferencesUI.py:2288 flatcamGUI/PreferencesUI.py:3031
msgid ""
"This sets the direction that the spindle is rotating.\n"
"It can be either:\n"
"- CW = clockwise or\n"
"- CCW = counter clockwise"
msgstr ""
"This sets the direction that the spindle is rotating.\n"
"It can be either:\n"
"- CW = clockwise or\n"
"- CCW = counter clockwise"

#: flatcamGUI/PreferencesUI.py:2299 flatcamGUI/PreferencesUI.py:3043
msgid "Fast Plunge"
msgstr "Fast Plunge"

#: flatcamGUI/PreferencesUI.py:2301 flatcamGUI/PreferencesUI.py:3045
msgid ""
"By checking this, the vertical move from\n"
"Z_Toolchange to Z_move is done with G0,\n"
"meaning the fastest speed available.\n"
"WARNING: the move is done at Toolchange X,Y coords."
msgstr ""
"By checking this, the vertical move from\n"
"Z_Toolchange to Z_move is done with G0,\n"
"meaning the fastest speed available.\n"
"WARNING: the move is done at Toolchange X,Y coords."

#: flatcamGUI/PreferencesUI.py:2310
msgid "Fast Retract"
msgstr "Fast Retract"

#: flatcamGUI/PreferencesUI.py:2312
msgid ""
"Exit hole strategy.\n"
" - When uncheked, while exiting the drilled hole the drill bit\n"
"will travel slow, with set feedrate (G1), up to zero depth and then\n"
"travel as fast as possible (G0) to the Z Move (travel height).\n"
" - When checked the travel from Z cut (cut depth) to Z_move\n"
"(travel height) is done as fast as possible (G0) in one move."
msgstr ""
"Exit hole strategy.\n"
" - When uncheked, while exiting the drilled hole the drill bit\n"
"will travel slow, with set feedrate (G1), up to zero depth and then\n"
"travel as fast as possible (G0) to the Z Move (travel height).\n"
" - When checked the travel from Z cut (cut depth) to Z_move\n"
"(travel height) is done as fast as possible (G0) in one move."

#: flatcamGUI/PreferencesUI.py:2331
msgid "Excellon Export"
msgstr "Excellon Export"

#: flatcamGUI/PreferencesUI.py:2336
msgid ""
"The parameters set here are used in the file exported\n"
"when using the File -> Export -> Export Excellon menu entry."
msgstr ""
"The parameters set here are used in the file exported\n"
"when using the File -> Export -> Export Excellon menu entry."

#: flatcamGUI/PreferencesUI.py:2347 flatcamGUI/PreferencesUI.py:2353
msgid "The units used in the Excellon file."
msgstr "The units used in the Excellon file."

#: flatcamGUI/PreferencesUI.py:2361
msgid ""
"The NC drill files, usually named Excellon files\n"
"are files that can be found in different formats.\n"
"Here we set the format used when the provided\n"
"coordinates are not using period."
msgstr ""
"The NC drill files, usually named Excellon files\n"
"are files that can be found in different formats.\n"
"Here we set the format used when the provided\n"
"coordinates are not using period."

#: flatcamGUI/PreferencesUI.py:2397
msgid "Format"
msgstr "Format"

#: flatcamGUI/PreferencesUI.py:2399 flatcamGUI/PreferencesUI.py:2409
msgid ""
"Select the kind of coordinates format used.\n"
"Coordinates can be saved with decimal point or without.\n"
"When there is no decimal point, it is required to specify\n"
"the number of digits for integer part and the number of decimals.\n"
"Also it will have to be specified if LZ = leading zeros are kept\n"
"or TZ = trailing zeros are kept."
msgstr ""
"Select the kind of coordinates format used.\n"
"Coordinates can be saved with decimal point or without.\n"
"When there is no decimal point, it is required to specify\n"
"the number of digits for integer part and the number of decimals.\n"
"Also it will have to be specified if LZ = leading zeros are kept\n"
"or TZ = trailing zeros are kept."

#: flatcamGUI/PreferencesUI.py:2406
msgid "Decimal"
msgstr "Decimal"

#: flatcamGUI/PreferencesUI.py:2407
msgid "No-Decimal"
msgstr "No-Decimal"

#: flatcamGUI/PreferencesUI.py:2433
msgid ""
"This sets the default type of Excellon zeros.\n"
"If LZ then Leading Zeros are kept and\n"
"Trailing Zeros are removed.\n"
"If TZ is checked then Trailing Zeros are kept\n"
"and Leading Zeros are removed."
msgstr ""
"This sets the default type of Excellon zeros.\n"
"If LZ then Leading Zeros are kept and\n"
"Trailing Zeros are removed.\n"
"If TZ is checked then Trailing Zeros are kept\n"
"and Leading Zeros are removed."

#: flatcamGUI/PreferencesUI.py:2443
msgid "Slot type"
msgstr "Slot type"

#: flatcamGUI/PreferencesUI.py:2446 flatcamGUI/PreferencesUI.py:2456
msgid ""
"This sets how the slots will be exported.\n"
"If ROUTED then the slots will be routed\n"
"using M15/M16 commands.\n"
"If DRILLED(G85) the slots will be exported\n"
"using the Drilled slot command (G85)."
msgstr ""
"This sets how the slots will be exported.\n"
"If ROUTED then the slots will be routed\n"
"using M15/M16 commands.\n"
"If DRILLED(G85) the slots will be exported\n"
"using the Drilled slot command (G85)."

#: flatcamGUI/PreferencesUI.py:2453
msgid "Routed"
msgstr "Routed"

#: flatcamGUI/PreferencesUI.py:2454
msgid "Drilled(G85)"
msgstr "Drilled(G85)"

#: flatcamGUI/PreferencesUI.py:2486
msgid "A list of Excellon Editor parameters."
msgstr "A list of Excellon Editor parameters."

#: flatcamGUI/PreferencesUI.py:2496
msgid ""
"Set the number of selected Excellon geometry\n"
"items above which the utility geometry\n"
"becomes just a selection rectangle.\n"
"Increases the performance when moving a\n"
"large number of geometric elements."
msgstr ""
"Set the number of selected Excellon geometry\n"
"items above which the utility geometry\n"
"becomes just a selection rectangle.\n"
"Increases the performance when moving a\n"
"large number of geometric elements."

#: flatcamGUI/PreferencesUI.py:2508
msgid "New Tool Dia"
msgstr "New Tool Dia"

#: flatcamGUI/PreferencesUI.py:2531
msgid "Linear Drill Array"
msgstr "Linear Drill Array"

#: flatcamGUI/PreferencesUI.py:2571
msgid "Circular Drill Array"
msgstr "Circular Drill Array"

#: flatcamGUI/PreferencesUI.py:2650
msgid "Linear Slot Array"
msgstr "Linear Slot Array"

#: flatcamGUI/PreferencesUI.py:2702
msgid "Circular Slot Array"
msgstr "Circular Slot Array"

#: flatcamGUI/PreferencesUI.py:2736
msgid "Geometry General"
msgstr "Geometry General"

#: flatcamGUI/PreferencesUI.py:2755
msgid ""
"The number of circle steps for <b>Geometry</b> \n"
"circle and arc shapes linear approximation."
msgstr ""
"The number of circle steps for <b>Geometry</b> \n"
"circle and arc shapes linear approximation."

#: flatcamGUI/PreferencesUI.py:2783
msgid "Geometry Options"
msgstr "Geometry Options"

#: flatcamGUI/PreferencesUI.py:2790
msgid ""
"Create a CNC Job object\n"
"tracing the contours of this\n"
"Geometry object."
msgstr ""
"Create a CNC Job object\n"
"tracing the contours of this\n"
"Geometry object."

#: flatcamGUI/PreferencesUI.py:2822
msgid "Depth/Pass"
msgstr "Depth/Pass"

#: flatcamGUI/PreferencesUI.py:2824
msgid ""
"The depth to cut on each pass,\n"
"when multidepth is enabled.\n"
"It has positive value although\n"
"it is a fraction from the depth\n"
"which has negative value."
msgstr ""
"The depth to cut on each pass,\n"
"when multidepth is enabled.\n"
"It has positive value although\n"
"it is a fraction from the depth\n"
"which has negative value."

#: flatcamGUI/PreferencesUI.py:2951
msgid "Geometry Adv. Options"
msgstr "Geometry Adv. Options"

#: flatcamGUI/PreferencesUI.py:2958
msgid ""
"A list of Geometry advanced parameters.\n"
"Those parameters are available only for\n"
"Advanced App. Level."
msgstr ""
"A list of Geometry advanced parameters.\n"
"Those parameters are available only for\n"
"Advanced App. Level."

#: flatcamGUI/PreferencesUI.py:2968 flatcamGUI/PreferencesUI.py:4502
#: flatcamTools/ToolSolderPaste.py:207
msgid "Toolchange X-Y"
msgstr "Toolchange X-Y"

#: flatcamGUI/PreferencesUI.py:2979
msgid ""
"Height of the tool just after starting the work.\n"
"Delete the value if you don't need this feature."
msgstr ""
"Height of the tool just after starting the work.\n"
"Delete the value if you don't need this feature."

#: flatcamGUI/PreferencesUI.py:3055
msgid "Seg. X size"
msgstr "Seg. X size"

#: flatcamGUI/PreferencesUI.py:3057
msgid ""
"The size of the trace segment on the X axis.\n"
"Useful for auto-leveling.\n"
"A value of 0 means no segmentation on the X axis."
msgstr ""
"The size of the trace segment on the X axis.\n"
"Useful for auto-leveling.\n"
"A value of 0 means no segmentation on the X axis."

#: flatcamGUI/PreferencesUI.py:3066
msgid "Seg. Y size"
msgstr "Seg. Y size"

#: flatcamGUI/PreferencesUI.py:3068
msgid ""
"The size of the trace segment on the Y axis.\n"
"Useful for auto-leveling.\n"
"A value of 0 means no segmentation on the Y axis."
msgstr ""
"The size of the trace segment on the Y axis.\n"
"Useful for auto-leveling.\n"
"A value of 0 means no segmentation on the Y axis."

#: flatcamGUI/PreferencesUI.py:3084
msgid "Geometry Editor"
msgstr "Geometry Editor"

#: flatcamGUI/PreferencesUI.py:3089
msgid "A list of Geometry Editor parameters."
msgstr "A list of Geometry Editor parameters."

#: flatcamGUI/PreferencesUI.py:3099
msgid ""
"Set the number of selected geometry\n"
"items above which the utility geometry\n"
"becomes just a selection rectangle.\n"
"Increases the performance when moving a\n"
"large number of geometric elements."
msgstr ""
"Set the number of selected geometry\n"
"items above which the utility geometry\n"
"becomes just a selection rectangle.\n"
"Increases the performance when moving a\n"
"large number of geometric elements."

#: flatcamGUI/PreferencesUI.py:3130
msgid "CNC Job General"
msgstr "CNC Job General"

#: flatcamGUI/PreferencesUI.py:3185
msgid ""
"The number of circle steps for <b>GCode</b> \n"
"circle and arc shapes linear approximation."
msgstr ""
"The number of circle steps for <b>GCode</b> \n"
"circle and arc shapes linear approximation."

#: flatcamGUI/PreferencesUI.py:3193
msgid "Travel dia"
msgstr "Travel dia"

#: flatcamGUI/PreferencesUI.py:3195
msgid ""
"The width of the travel lines to be\n"
"rendered in the plot."
msgstr ""
"The width of the travel lines to be\n"
"rendered in the plot."

#: flatcamGUI/PreferencesUI.py:3206
msgid "Coordinates decimals"
msgstr "Coordinates decimals"

#: flatcamGUI/PreferencesUI.py:3208
msgid ""
"The number of decimals to be used for \n"
"the X, Y, Z coordinates in CNC code (GCODE, etc.)"
msgstr ""
"The number of decimals to be used for \n"
"the X, Y, Z coordinates in CNC code (GCODE, etc.)"

#: flatcamGUI/PreferencesUI.py:3216
msgid "Feedrate decimals"
msgstr "Feedrate decimals"

#: flatcamGUI/PreferencesUI.py:3218
msgid ""
"The number of decimals to be used for \n"
"the Feedrate parameter in CNC code (GCODE, etc.)"
msgstr ""
"The number of decimals to be used for \n"
"the Feedrate parameter in CNC code (GCODE, etc.)"

#: flatcamGUI/PreferencesUI.py:3226
msgid "Coordinates type"
msgstr "Coordinates type"

#: flatcamGUI/PreferencesUI.py:3228
msgid ""
"The type of coordinates to be used in Gcode.\n"
"Can be:\n"
"- Absolute G90 -> the reference is the origin x=0, y=0\n"
"- Incremental G91 -> the reference is the previous position"
msgstr ""
"The type of coordinates to be used in Gcode.\n"
"Can be:\n"
"- Absolute G90 -> the reference is the origin x=0, y=0\n"
"- Incremental G91 -> the reference is the previous position"

#: flatcamGUI/PreferencesUI.py:3234
msgid "Absolute G90"
msgstr "Absolute G90"

#: flatcamGUI/PreferencesUI.py:3235
msgid "Incremental G91"
msgstr "Incremental G91"

#: flatcamGUI/PreferencesUI.py:3252
msgid "CNC Job Options"
msgstr "CNC Job Options"

#: flatcamGUI/PreferencesUI.py:3255
msgid "Export G-Code"
msgstr "Export G-Code"

#: flatcamGUI/PreferencesUI.py:3271
msgid "Prepend to G-Code"
msgstr "Prepend to G-Code"

#: flatcamGUI/PreferencesUI.py:3283
msgid "Append to G-Code"
msgstr "Append to G-Code"

#: flatcamGUI/PreferencesUI.py:3303
msgid "CNC Job Adv. Options"
msgstr "CNC Job Adv. Options"

#: flatcamGUI/PreferencesUI.py:3370
msgid "tool number"
msgstr "tool number"

#: flatcamGUI/PreferencesUI.py:3371
msgid "tool diameter"
msgstr "tool diameter"

#: flatcamGUI/PreferencesUI.py:3372
msgid "for Excellon, total number of drills"
msgstr "for Excellon, total number of drills"

#: flatcamGUI/PreferencesUI.py:3374
msgid "X coord for Toolchange"
msgstr "X coord for Toolchange"

#: flatcamGUI/PreferencesUI.py:3377
msgid "Z coord for Toolchange"
msgstr "Z coord for Toolchange"

#: flatcamGUI/PreferencesUI.py:3378
msgid "Z depth for the cut"
msgstr "Z depth for the cut"

#: flatcamGUI/PreferencesUI.py:3379
msgid "Z height for travel"
msgstr "Z height for travel"

#: flatcamGUI/PreferencesUI.py:3380
msgid "the step value for multidepth cut"
msgstr "the step value for multidepth cut"

#: flatcamGUI/PreferencesUI.py:3382
msgid "the value for the spindle speed"
msgstr "the value for the spindle speed"

#: flatcamGUI/PreferencesUI.py:3404
msgid "Annotation Size"
msgstr "Annotation Size"

#: flatcamGUI/PreferencesUI.py:3406
msgid "The font size of the annotation text. In pixels."
msgstr "The font size of the annotation text. In pixels."

#: flatcamGUI/PreferencesUI.py:3414
msgid "Annotation Color"
msgstr "Annotation Color"

#: flatcamGUI/PreferencesUI.py:3416
msgid "Set the font color for the annotation texts."
msgstr "Set the font color for the annotation texts."

#: flatcamGUI/PreferencesUI.py:3442
msgid "NCC Tool Options"
msgstr "NCC Tool Options"

#: flatcamGUI/PreferencesUI.py:3455 flatcamGUI/PreferencesUI.py:4437
msgid "Tools dia"
msgstr "Tools dia"

#: flatcamGUI/PreferencesUI.py:3466 flatcamGUI/PreferencesUI.py:3474
#: flatcamTools/ToolNonCopperClear.py:198
#: flatcamTools/ToolNonCopperClear.py:206
msgid ""
"Default tool type:\n"
"- 'V-shape'\n"
"- Circular"
msgstr ""
"Default tool type:\n"
"- 'V-shape'\n"
"- Circular"

#: flatcamGUI/PreferencesUI.py:3471 flatcamTools/ToolNonCopperClear.py:203
msgid "V-shape"
msgstr "V-shape"

#: flatcamGUI/PreferencesUI.py:3504 flatcamGUI/PreferencesUI.py:3512
#: flatcamTools/ToolNonCopperClear.py:150
#: flatcamTools/ToolNonCopperClear.py:158
msgid ""
"Milling type when the selected tool is of type: 'iso_op':\n"
"- climb / best for precision milling and to reduce tool usage\n"
"- conventional / useful when there is no backlash compensation"
msgstr ""
"Milling type when the selected tool is of type: 'iso_op':\n"
"- climb / best for precision milling and to reduce tool usage\n"
"- conventional / useful when there is no backlash compensation"

#: flatcamGUI/PreferencesUI.py:3521 flatcamGUI/PreferencesUI.py:3885
#: flatcamTools/ToolNonCopperClear.py:164 flatcamTools/ToolPaint.py:137
msgid "Tool order"
msgstr "Tool order"

#: flatcamGUI/PreferencesUI.py:3522 flatcamGUI/PreferencesUI.py:3532
#: flatcamGUI/PreferencesUI.py:3886 flatcamGUI/PreferencesUI.py:3896
#: flatcamTools/ToolNonCopperClear.py:165
#: flatcamTools/ToolNonCopperClear.py:175 flatcamTools/ToolPaint.py:138
#: flatcamTools/ToolPaint.py:148
msgid ""
"This set the way that the tools in the tools table are used.\n"
"'No' --> means that the used order is the one in the tool table\n"
"'Forward' --> means that the tools will be ordered from small to big\n"
"'Reverse' --> menas that the tools will ordered from big to small\n"
"\n"
"WARNING: using rest machining will automatically set the order\n"
"in reverse and disable this control."
msgstr ""
"This set the way that the tools in the tools table are used.\n"
"'No' --> means that the used order is the one in the tool table\n"
"'Forward' --> means that the tools will be ordered from small to big\n"
"'Reverse' --> menas that the tools will ordered from big to small\n"
"\n"
"WARNING: using rest machining will automatically set the order\n"
"in reverse and disable this control."

#: flatcamGUI/PreferencesUI.py:3530 flatcamGUI/PreferencesUI.py:3894
#: flatcamTools/ToolNonCopperClear.py:173 flatcamTools/ToolPaint.py:146
msgid "Forward"
msgstr "Forward"

#: flatcamGUI/PreferencesUI.py:3531 flatcamGUI/PreferencesUI.py:3895
#: flatcamTools/ToolNonCopperClear.py:174 flatcamTools/ToolPaint.py:147
msgid "Reverse"
msgstr "Reverse"

#: flatcamGUI/PreferencesUI.py:3544 flatcamGUI/PreferencesUI.py:3549
#: flatcamTools/ToolNonCopperClear.py:280
#: flatcamTools/ToolNonCopperClear.py:288
msgid ""
"Depth of cut into material. Negative value.\n"
"In FlatCAM units."
msgstr ""
"Depth of cut into material. Negative value.\n"
"In FlatCAM units."

#: flatcamGUI/PreferencesUI.py:3559 flatcamTools/ToolNonCopperClear.py:297
#, python-format
msgid ""
"How much (fraction) of the tool width to overlap each tool pass.\n"
"Example:\n"
"A value here of 0.25 means 25%% from the tool diameter found above.\n"
"\n"
"Adjust the value starting with lower values\n"
"and increasing it if areas that should be cleared are still \n"
"not cleared.\n"
"Lower values = faster processing, faster execution on PCB.\n"
"Higher values = slow processing and slow execution on CNC\n"
"due of too many paths."
msgstr ""
"How much (fraction) of the tool width to overlap each tool pass.\n"
"Example:\n"
"A value here of 0.25 means 25%% from the tool diameter found above.\n"
"\n"
"Adjust the value starting with lower values\n"
"and increasing it if areas that should be cleared are still \n"
"not cleared.\n"
"Lower values = faster processing, faster execution on PCB.\n"
"Higher values = slow processing and slow execution on CNC\n"
"due of too many paths."

#: flatcamGUI/PreferencesUI.py:3580 flatcamTools/ToolNonCopperClear.py:317
msgid "Bounding box margin."
msgstr "Bounding box margin."

#: flatcamGUI/PreferencesUI.py:3589 flatcamGUI/PreferencesUI.py:3940
#: flatcamTools/ToolNonCopperClear.py:328
msgid ""
"Algorithm for non-copper clearing:<BR><B>Standard</B>: Fixed step inwards."
"<BR><B>Seed-based</B>: Outwards from seed.<BR><B>Line-based</B>: Parallel "
"lines."
msgstr ""
"Algorithm for non-copper clearing:<BR><B>Standard</B>: Fixed step inwards."
"<BR><B>Seed-based</B>: Outwards from seed.<BR><B>Line-based</B>: Parallel "
"lines."

#: flatcamGUI/PreferencesUI.py:3603 flatcamGUI/PreferencesUI.py:3954
#: flatcamTools/ToolNonCopperClear.py:342 flatcamTools/ToolPaint.py:253
msgid "Connect"
msgstr "Connect"

#: flatcamGUI/PreferencesUI.py:3613 flatcamGUI/PreferencesUI.py:3964
#: flatcamTools/ToolNonCopperClear.py:351 flatcamTools/ToolPaint.py:262
msgid "Contour"
msgstr "Contour"

#: flatcamGUI/PreferencesUI.py:3623 flatcamTools/ToolNonCopperClear.py:360
#: flatcamTools/ToolPaint.py:271
msgid "Rest M."
msgstr "Rest M."

#: flatcamGUI/PreferencesUI.py:3625 flatcamTools/ToolNonCopperClear.py:362
msgid ""
"If checked, use 'rest machining'.\n"
"Basically it will clear copper outside PCB features,\n"
"using the biggest tool and continue with the next tools,\n"
"from bigger to smaller, to clear areas of copper that\n"
"could not be cleared by previous tool, until there is\n"
"no more copper to clear or there are no more tools.\n"
"If not checked, use the standard algorithm."
msgstr ""
"If checked, use 'rest machining'.\n"
"Basically it will clear copper outside PCB features,\n"
"using the biggest tool and continue with the next tools,\n"
"from bigger to smaller, to clear areas of copper that\n"
"could not be cleared by previous tool, until there is\n"
"no more copper to clear or there are no more tools.\n"
"If not checked, use the standard algorithm."

#: flatcamGUI/PreferencesUI.py:3640 flatcamGUI/PreferencesUI.py:3652
#: flatcamTools/ToolNonCopperClear.py:377
#: flatcamTools/ToolNonCopperClear.py:389
msgid ""
"If used, it will add an offset to the copper features.\n"
"The copper clearing will finish to a distance\n"
"from the copper features.\n"
"The value can be between 0 and 10 FlatCAM units."
msgstr ""
"If used, it will add an offset to the copper features.\n"
"The copper clearing will finish to a distance\n"
"from the copper features.\n"
"The value can be between 0 and 10 FlatCAM units."

#: flatcamGUI/PreferencesUI.py:3650 flatcamTools/ToolNonCopperClear.py:387
msgid "Offset value"
msgstr "Offset value"

#: flatcamGUI/PreferencesUI.py:3667 flatcamTools/ToolNonCopperClear.py:413
msgid "Itself"
msgstr "Itself"

#: flatcamGUI/PreferencesUI.py:3668 flatcamGUI/PreferencesUI.py:3985
msgid "Area"
msgstr "Area"

#: flatcamGUI/PreferencesUI.py:3669
msgid "Ref"
msgstr "Ref"

#: flatcamGUI/PreferencesUI.py:3670
msgid "Reference"
msgstr "Reference"

#: flatcamGUI/PreferencesUI.py:3672 flatcamTools/ToolNonCopperClear.py:419
msgid ""
"- 'Itself' -  the non copper clearing extent\n"
"is based on the object that is copper cleared.\n"
" - 'Area Selection' - left mouse click to start selection of the area to be "
"painted.\n"
"Keeping a modifier key pressed (CTRL or SHIFT) will allow to add multiple "
"areas.\n"
"- 'Reference Object' -  will do non copper clearing within the area\n"
"specified by another object."
msgstr ""
"- 'Itself' -  the non copper clearing extent\n"
"is based on the object that is copper cleared.\n"
" - 'Area Selection' - left mouse click to start selection of the area to be "
"painted.\n"
"Keeping a modifier key pressed (CTRL or SHIFT) will allow to add multiple "
"areas.\n"
"- 'Reference Object' -  will do non copper clearing within the area\n"
"specified by another object."

#: flatcamGUI/PreferencesUI.py:3683 flatcamGUI/PreferencesUI.py:3993
msgid "Normal"
msgstr "Normal"

#: flatcamGUI/PreferencesUI.py:3684 flatcamGUI/PreferencesUI.py:3994
msgid "Progressive"
msgstr "Progressive"

#: flatcamGUI/PreferencesUI.py:3685
msgid "NCC Plotting"
msgstr "NCC Plotting"

#: flatcamGUI/PreferencesUI.py:3687
msgid ""
"- 'Normal' -  normal plotting, done at the end of the NCC job\n"
"- 'Progressive' - after each shape is generated it will be plotted."
msgstr ""
"- 'Normal' -  normal plotting, done at the end of the NCC job\n"
"- 'Progressive' - after each shape is generated it will be plotted."

#: flatcamGUI/PreferencesUI.py:3701
msgid "Cutout Tool Options"
msgstr "Cutout Tool Options"

#: flatcamGUI/PreferencesUI.py:3717 flatcamTools/ToolCutOut.py:96
msgid ""
"Diameter of the tool used to cutout\n"
"the PCB shape out of the surrounding material."
msgstr ""
"Diameter of the tool used to cutout\n"
"the PCB shape out of the surrounding material."

#: flatcamGUI/PreferencesUI.py:3725 flatcamTools/ToolCutOut.py:77
msgid "Obj kind"
msgstr "Obj kind"

#: flatcamGUI/PreferencesUI.py:3727 flatcamTools/ToolCutOut.py:79
msgid ""
"Choice of what kind the object we want to cutout is.<BR>- <B>Single</B>: "
"contain a single PCB Gerber outline object.<BR>- <B>Panel</B>: a panel PCB "
"Gerber object, which is made\n"
"out of many individual PCB outlines."
msgstr ""
"Choice of what kind the object we want to cutout is.<BR>- <B>Single</B>: "
"contain a single PCB Gerber outline object.<BR>- <B>Panel</B>: a panel PCB "
"Gerber object, which is made\n"
"out of many individual PCB outlines."

#: flatcamGUI/PreferencesUI.py:3734 flatcamGUI/PreferencesUI.py:3984
#: flatcamTools/ToolCutOut.py:85
msgid "Single"
msgstr "Single"

#: flatcamGUI/PreferencesUI.py:3735 flatcamTools/ToolCutOut.py:86
msgid "Panel"
msgstr "Panel"

#: flatcamGUI/PreferencesUI.py:3741 flatcamTools/ToolCutOut.py:107
msgid ""
"Margin over bounds. A positive value here\n"
"will make the cutout of the PCB further from\n"
"the actual PCB border"
msgstr ""
"Margin over bounds. A positive value here\n"
"will make the cutout of the PCB further from\n"
"the actual PCB border"

#: flatcamGUI/PreferencesUI.py:3749
msgid "Gap size"
msgstr "Gap size"

#: flatcamGUI/PreferencesUI.py:3751 flatcamTools/ToolCutOut.py:119
msgid ""
"The size of the bridge gaps in the cutout\n"
"used to keep the board connected to\n"
"the surrounding material (the one \n"
"from which the PCB is cutout)."
msgstr ""
"The size of the bridge gaps in the cutout\n"
"used to keep the board connected to\n"
"the surrounding material (the one \n"
"from which the PCB is cutout)."

#: flatcamGUI/PreferencesUI.py:3760 flatcamTools/ToolCutOut.py:155
msgid "Gaps"
msgstr "Gaps"

#: flatcamGUI/PreferencesUI.py:3762
msgid ""
"Number of gaps used for the cutout.\n"
"There can be maximum 8 bridges/gaps.\n"
"The choices are:\n"
"- None  - no gaps\n"
"- lr    - left + right\n"
"- tb    - top + bottom\n"
"- 4     - left + right +top + bottom\n"
"- 2lr   - 2*left + 2*right\n"
"- 2tb  - 2*top + 2*bottom\n"
"- 8     - 2*left + 2*right +2*top + 2*bottom"
msgstr ""
"Number of gaps used for the cutout.\n"
"There can be maximum 8 bridges/gaps.\n"
"The choices are:\n"
"- None  - no gaps\n"
"- lr    - left + right\n"
"- tb    - top + bottom\n"
"- 4     - left + right +top + bottom\n"
"- 2lr   - 2*left + 2*right\n"
"- 2tb  - 2*top + 2*bottom\n"
"- 8     - 2*left + 2*right +2*top + 2*bottom"

#: flatcamGUI/PreferencesUI.py:3784 flatcamTools/ToolCutOut.py:136
msgid "Convex Sh."
msgstr "Convex Sh."

#: flatcamGUI/PreferencesUI.py:3786 flatcamTools/ToolCutOut.py:138
msgid ""
"Create a convex shape surrounding the entire PCB.\n"
"Used only if the source object type is Gerber."
msgstr ""
"Create a convex shape surrounding the entire PCB.\n"
"Used only if the source object type is Gerber."

#: flatcamGUI/PreferencesUI.py:3800
msgid "2Sided Tool Options"
msgstr "2Sided Tool Options"

#: flatcamGUI/PreferencesUI.py:3805
msgid ""
"A tool to help in creating a double sided\n"
"PCB using alignment holes."
msgstr ""
"A tool to help in creating a double sided\n"
"PCB using alignment holes."

#: flatcamGUI/PreferencesUI.py:3815 flatcamTools/ToolDblSided.py:240
msgid "Drill dia"
msgstr "Drill dia"

#: flatcamGUI/PreferencesUI.py:3817 flatcamTools/ToolDblSided.py:231
#: flatcamTools/ToolDblSided.py:242
msgid "Diameter of the drill for the alignment holes."
msgstr "Diameter of the drill for the alignment holes."

#: flatcamGUI/PreferencesUI.py:3826 flatcamTools/ToolDblSided.py:121
msgid "Mirror Axis:"
msgstr "Mirror Axis:"

#: flatcamGUI/PreferencesUI.py:3828 flatcamTools/ToolDblSided.py:123
msgid "Mirror vertically (X) or horizontally (Y)."
msgstr "Mirror vertically (X) or horizontally (Y)."

#: flatcamGUI/PreferencesUI.py:3837 flatcamTools/ToolDblSided.py:132
msgid "Point"
msgstr "Point"

#: flatcamGUI/PreferencesUI.py:3838 flatcamTools/ToolDblSided.py:133
msgid "Box"
msgstr "Box"

#: flatcamGUI/PreferencesUI.py:3839
msgid "Axis Ref"
msgstr "Axis Ref"

#: flatcamGUI/PreferencesUI.py:3841 flatcamTools/ToolDblSided.py:136
msgid ""
"The axis should pass through a <b>point</b> or cut\n"
" a specified <b>box</b> (in a FlatCAM object) through \n"
"the center."
msgstr ""
"The axis should pass through a <b>point</b> or cut\n"
" a specified <b>box</b> (in a FlatCAM object) through \n"
"the center."

#: flatcamGUI/PreferencesUI.py:3857
msgid "Paint Tool Options"
msgstr "Paint Tool Options"

#: flatcamGUI/PreferencesUI.py:3862
msgid "<b>Parameters:</b>"
msgstr "<b>Parameters:</b>"

#: flatcamGUI/PreferencesUI.py:3974 flatcamTools/ToolPaint.py:286
msgid "Selection"
msgstr "Selection"

#: flatcamGUI/PreferencesUI.py:3976 flatcamTools/ToolPaint.py:288
#: flatcamTools/ToolPaint.py:304
msgid ""
"How to select Polygons to be painted.\n"
"\n"
"- 'Area Selection' - left mouse click to start selection of the area to be "
"painted.\n"
"Keeping a modifier key pressed (CTRL or SHIFT) will allow to add multiple "
"areas.\n"
"- 'All Polygons' - the Paint will start after click.\n"
"- 'Reference Object' -  will do non copper clearing within the area\n"
"specified by another object."
msgstr ""
"How to select Polygons to be painted.\n"
"\n"
"- 'Area Selection' - left mouse click to start selection of the area to be "
"painted.\n"
"Keeping a modifier key pressed (CTRL or SHIFT) will allow to add multiple "
"areas.\n"
"- 'All Polygons' - the Paint will start after click.\n"
"- 'Reference Object' -  will do non copper clearing within the area\n"
"specified by another object."

#: flatcamGUI/PreferencesUI.py:3987
msgid "Ref."
msgstr "Ref."

#: flatcamGUI/PreferencesUI.py:3995
msgid "Paint Plotting"
msgstr "Paint Plotting"

#: flatcamGUI/PreferencesUI.py:3997
msgid ""
"- 'Normal' -  normal plotting, done at the end of the Paint job\n"
"- 'Progressive' - after each shape is generated it will be plotted."
msgstr ""
"- 'Normal' -  normal plotting, done at the end of the Paint job\n"
"- 'Progressive' - after each shape is generated it will be plotted."

#: flatcamGUI/PreferencesUI.py:4011
msgid "Film Tool Options"
msgstr "Film Tool Options"

#: flatcamGUI/PreferencesUI.py:4016
msgid ""
"Create a PCB film from a Gerber or Geometry\n"
"FlatCAM object.\n"
"The file is saved in SVG format."
msgstr ""
"Create a PCB film from a Gerber or Geometry\n"
"FlatCAM object.\n"
"The file is saved in SVG format."

#: flatcamGUI/PreferencesUI.py:4027
msgid "Film Type"
msgstr "Film Type"

#: flatcamGUI/PreferencesUI.py:4029 flatcamTools/ToolFilm.py:145
msgid ""
"Generate a Positive black film or a Negative film.\n"
"Positive means that it will print the features\n"
"with black on a white canvas.\n"
"Negative means that it will print the features\n"
"with white on a black canvas.\n"
"The Film format is SVG."
msgstr ""
"Generate a Positive black film or a Negative film.\n"
"Positive means that it will print the features\n"
"with black on a white canvas.\n"
"Negative means that it will print the features\n"
"with white on a black canvas.\n"
"The Film format is SVG."

#: flatcamGUI/PreferencesUI.py:4040
msgid "Film Color"
msgstr "Film Color"

#: flatcamGUI/PreferencesUI.py:4042
msgid "Set the film color when positive film is selected."
msgstr "Set the film color when positive film is selected."

#: flatcamGUI/PreferencesUI.py:4060 flatcamTools/ToolFilm.py:158
msgid "Border"
msgstr "Border"

#: flatcamGUI/PreferencesUI.py:4062 flatcamTools/ToolFilm.py:160
msgid ""
"Specify a border around the object.\n"
"Only for negative film.\n"
"It helps if we use as a Box Object the same \n"
"object as in Film Object. It will create a thick\n"
"black bar around the actual print allowing for a\n"
"better delimitation of the outline features which are of\n"
"white color like the rest and which may confound with the\n"
"surroundings if not for this border."
msgstr ""
"Specify a border around the object.\n"
"Only for negative film.\n"
"It helps if we use as a Box Object the same \n"
"object as in Film Object. It will create a thick\n"
"black bar around the actual print allowing for a\n"
"better delimitation of the outline features which are of\n"
"white color like the rest and which may confound with the\n"
"surroundings if not for this border."

#: flatcamGUI/PreferencesUI.py:4075 flatcamTools/ToolFilm.py:128
msgid "Scale Stroke"
msgstr "Scale Stroke"

#: flatcamGUI/PreferencesUI.py:4077 flatcamTools/ToolFilm.py:130
msgid ""
"Scale the line stroke thickness of each feature in the SVG file.\n"
"It means that the line that envelope each SVG feature will be thicker or "
"thinner,\n"
"therefore the fine features may be more affected by this parameter."
msgstr ""
"Scale the line stroke thickness of each feature in the SVG file.\n"
"It means that the line that envelope each SVG feature will be thicker or "
"thinner,\n"
"therefore the fine features may be more affected by this parameter."

#: flatcamGUI/PreferencesUI.py:4092
msgid "Panelize Tool Options"
msgstr "Panelize Tool Options"

#: flatcamGUI/PreferencesUI.py:4097
msgid ""
"Create an object that contains an array of (x, y) elements,\n"
"each element is a copy of the source object spaced\n"
"at a X distance, Y distance of each other."
msgstr ""
"Create an object that contains an array of (x, y) elements,\n"
"each element is a copy of the source object spaced\n"
"at a X distance, Y distance of each other."

#: flatcamGUI/PreferencesUI.py:4108 flatcamTools/ToolPanelize.py:147
msgid "Spacing cols"
msgstr "Spacing cols"

#: flatcamGUI/PreferencesUI.py:4110 flatcamTools/ToolPanelize.py:149
msgid ""
"Spacing between columns of the desired panel.\n"
"In current units."
msgstr ""
"Spacing between columns of the desired panel.\n"
"In current units."

#: flatcamGUI/PreferencesUI.py:4118 flatcamTools/ToolPanelize.py:156
msgid "Spacing rows"
msgstr "Spacing rows"

#: flatcamGUI/PreferencesUI.py:4120 flatcamTools/ToolPanelize.py:158
msgid ""
"Spacing between rows of the desired panel.\n"
"In current units."
msgstr ""
"Spacing between rows of the desired panel.\n"
"In current units."

#: flatcamGUI/PreferencesUI.py:4128 flatcamTools/ToolPanelize.py:165
msgid "Columns"
msgstr "Columns"

#: flatcamGUI/PreferencesUI.py:4130 flatcamTools/ToolPanelize.py:167
msgid "Number of columns of the desired panel"
msgstr "Number of columns of the desired panel"

#: flatcamGUI/PreferencesUI.py:4137 flatcamTools/ToolPanelize.py:173
msgid "Rows"
msgstr "Rows"

#: flatcamGUI/PreferencesUI.py:4139 flatcamTools/ToolPanelize.py:175
msgid "Number of rows of the desired panel"
msgstr "Number of rows of the desired panel"

#: flatcamGUI/PreferencesUI.py:4145 flatcamTools/ToolPanelize.py:181
msgid "Gerber"
msgstr "Gerber"

#: flatcamGUI/PreferencesUI.py:4146 flatcamTools/ToolPanelize.py:182
msgid "Geo"
msgstr "Geo"

#: flatcamGUI/PreferencesUI.py:4147 flatcamTools/ToolPanelize.py:183
msgid "Panel Type"
msgstr "Panel Type"

#: flatcamGUI/PreferencesUI.py:4149
msgid ""
"Choose the type of object for the panel object:\n"
"- Gerber\n"
"- Geometry"
msgstr ""
"Choose the type of object for the panel object:\n"
"- Gerber\n"
"- Geometry"

#: flatcamGUI/PreferencesUI.py:4158
msgid "Constrain within"
msgstr "Constrain within"

#: flatcamGUI/PreferencesUI.py:4160 flatcamTools/ToolPanelize.py:195
msgid ""
"Area define by DX and DY within to constrain the panel.\n"
"DX and DY values are in current units.\n"
"Regardless of how many columns and rows are desired,\n"
"the final panel will have as many columns and rows as\n"
"they fit completely within selected area."
msgstr ""
"Area define by DX and DY within to constrain the panel.\n"
"DX and DY values are in current units.\n"
"Regardless of how many columns and rows are desired,\n"
"the final panel will have as many columns and rows as\n"
"they fit completely within selected area."

#: flatcamGUI/PreferencesUI.py:4169 flatcamTools/ToolPanelize.py:204
msgid "Width (DX)"
msgstr "Width (DX)"

#: flatcamGUI/PreferencesUI.py:4171 flatcamTools/ToolPanelize.py:206
msgid ""
"The width (DX) within which the panel must fit.\n"
"In current units."
msgstr ""
"The width (DX) within which the panel must fit.\n"
"In current units."

#: flatcamGUI/PreferencesUI.py:4178 flatcamTools/ToolPanelize.py:212
msgid "Height (DY)"
msgstr "Height (DY)"

#: flatcamGUI/PreferencesUI.py:4180 flatcamTools/ToolPanelize.py:214
msgid ""
"The height (DY)within which the panel must fit.\n"
"In current units."
msgstr ""
"The height (DY)within which the panel must fit.\n"
"In current units."

#: flatcamGUI/PreferencesUI.py:4194
msgid "Calculators Tool Options"
msgstr "Calculators Tool Options"

#: flatcamGUI/PreferencesUI.py:4197 flatcamTools/ToolCalculators.py:25
msgid "V-Shape Tool Calculator"
msgstr "V-Shape Tool Calculator"

#: flatcamGUI/PreferencesUI.py:4199
msgid ""
"Calculate the tool diameter for a given V-shape tool,\n"
"having the tip diameter, tip angle and\n"
"depth-of-cut as parameters."
msgstr ""
"Calculate the tool diameter for a given V-shape tool,\n"
"having the tip diameter, tip angle and\n"
"depth-of-cut as parameters."

#: flatcamGUI/PreferencesUI.py:4210 flatcamTools/ToolCalculators.py:94
msgid "Tip Diameter"
msgstr "Tip Diameter"

#: flatcamGUI/PreferencesUI.py:4212 flatcamTools/ToolCalculators.py:100
msgid ""
"This is the tool tip diameter.\n"
"It is specified by manufacturer."
msgstr ""
"This is the tool tip diameter.\n"
"It is specified by manufacturer."

#: flatcamGUI/PreferencesUI.py:4220 flatcamTools/ToolCalculators.py:103
msgid "Tip Angle"
msgstr "Tip Angle"

#: flatcamGUI/PreferencesUI.py:4222
msgid ""
"This is the angle on the tip of the tool.\n"
"It is specified by manufacturer."
msgstr ""
"This is the angle on the tip of the tool.\n"
"It is specified by manufacturer."

#: flatcamGUI/PreferencesUI.py:4232
msgid ""
"This is depth to cut into material.\n"
"In the CNCJob object it is the CutZ parameter."
msgstr ""
"This is depth to cut into material.\n"
"In the CNCJob object it is the CutZ parameter."

#: flatcamGUI/PreferencesUI.py:4239 flatcamTools/ToolCalculators.py:27
msgid "ElectroPlating Calculator"
msgstr "ElectroPlating Calculator"

#: flatcamGUI/PreferencesUI.py:4241 flatcamTools/ToolCalculators.py:154
msgid ""
"This calculator is useful for those who plate the via/pad/drill holes,\n"
"using a method like grahite ink or calcium hypophosphite ink or palladium "
"chloride."
msgstr ""
"This calculator is useful for those who plate the via/pad/drill holes,\n"
"using a method like grahite ink or calcium hypophosphite ink or palladium "
"chloride."

#: flatcamGUI/PreferencesUI.py:4251 flatcamTools/ToolCalculators.py:163
msgid "Board Length"
msgstr "Board Length"

#: flatcamGUI/PreferencesUI.py:4253 flatcamTools/ToolCalculators.py:168
msgid "This is the board length. In centimeters."
msgstr "This is the board length. In centimeters."

#: flatcamGUI/PreferencesUI.py:4259 flatcamTools/ToolCalculators.py:170
msgid "Board Width"
msgstr "Board Width"

#: flatcamGUI/PreferencesUI.py:4261 flatcamTools/ToolCalculators.py:175
msgid "This is the board width.In centimeters."
msgstr "This is the board width.In centimeters."

#: flatcamGUI/PreferencesUI.py:4266 flatcamTools/ToolCalculators.py:177
msgid "Current Density"
msgstr "Current Density"

#: flatcamGUI/PreferencesUI.py:4269 flatcamTools/ToolCalculators.py:182
msgid ""
"Current density to pass through the board. \n"
"In Amps per Square Feet ASF."
msgstr ""
"Current density to pass through the board. \n"
"In Amps per Square Feet ASF."

#: flatcamGUI/PreferencesUI.py:4275 flatcamTools/ToolCalculators.py:185
msgid "Copper Growth"
msgstr "Copper Growth"

#: flatcamGUI/PreferencesUI.py:4278 flatcamTools/ToolCalculators.py:190
msgid ""
"How thick the copper growth is intended to be.\n"
"In microns."
msgstr ""
"How thick the copper growth is intended to be.\n"
"In microns."

#: flatcamGUI/PreferencesUI.py:4291
msgid "Transform Tool Options"
msgstr "Transform Tool Options"

#: flatcamGUI/PreferencesUI.py:4296
msgid ""
"Various transformations that can be applied\n"
"on a FlatCAM object."
msgstr ""
"Various transformations that can be applied\n"
"on a FlatCAM object."

#: flatcamGUI/PreferencesUI.py:4306
msgid "Rotate Angle"
msgstr "Rotate Angle"

#: flatcamGUI/PreferencesUI.py:4318
msgid "Skew_X angle"
msgstr "Skew_X angle"

#: flatcamGUI/PreferencesUI.py:4328
msgid "Skew_Y angle"
msgstr "Skew_Y angle"

#: flatcamGUI/PreferencesUI.py:4338
msgid "Scale_X factor"
msgstr "Scale_X factor"

#: flatcamGUI/PreferencesUI.py:4340 flatcamTools/ToolTransform.py:148
msgid "Factor for scaling on X axis."
msgstr "Factor for scaling on X axis."

#: flatcamGUI/PreferencesUI.py:4347
msgid "Scale_Y factor"
msgstr "Scale_Y factor"

#: flatcamGUI/PreferencesUI.py:4349 flatcamTools/ToolTransform.py:169
msgid "Factor for scaling on Y axis."
msgstr "Factor for scaling on Y axis."

#: flatcamGUI/PreferencesUI.py:4357 flatcamTools/ToolTransform.py:192
msgid ""
"Scale the selected object(s)\n"
"using the Scale_X factor for both axis."
msgstr ""
"Scale the selected object(s)\n"
"using the Scale_X factor for both axis."

#: flatcamGUI/PreferencesUI.py:4365 flatcamTools/ToolTransform.py:200
msgid ""
"Scale the selected object(s)\n"
"using the origin reference when checked,\n"
"and the center of the biggest bounding box\n"
"of the selected objects when unchecked."
msgstr ""
"Scale the selected object(s)\n"
"using the origin reference when checked,\n"
"and the center of the biggest bounding box\n"
"of the selected objects when unchecked."

#: flatcamGUI/PreferencesUI.py:4374
msgid "Offset_X val"
msgstr "Offset_X val"

#: flatcamGUI/PreferencesUI.py:4376 flatcamTools/ToolTransform.py:217
msgid "Distance to offset on X axis. In current units."
msgstr "Distance to offset on X axis. In current units."

#: flatcamGUI/PreferencesUI.py:4383
msgid "Offset_Y val"
msgstr "Offset_Y val"

#: flatcamGUI/PreferencesUI.py:4385 flatcamTools/ToolTransform.py:238
msgid "Distance to offset on Y axis. In current units."
msgstr "Distance to offset on Y axis. In current units."

#: flatcamGUI/PreferencesUI.py:4391 flatcamTools/ToolTransform.py:283
msgid "Mirror Reference"
msgstr "Mirror Reference"

#: flatcamGUI/PreferencesUI.py:4393 flatcamTools/ToolTransform.py:285
msgid ""
"Flip the selected object(s)\n"
"around the point in Point Entry Field.\n"
"\n"
"The point coordinates can be captured by\n"
"left click on canvas together with pressing\n"
"SHIFT key. \n"
"Then click Add button to insert coordinates.\n"
"Or enter the coords in format (x, y) in the\n"
"Point Entry field and click Flip on X(Y)"
msgstr ""
"Flip the selected object(s)\n"
"around the point in Point Entry Field.\n"
"\n"
"The point coordinates can be captured by\n"
"left click on canvas together with pressing\n"
"SHIFT key. \n"
"Then click Add button to insert coordinates.\n"
"Or enter the coords in format (x, y) in the\n"
"Point Entry field and click Flip on X(Y)"

#: flatcamGUI/PreferencesUI.py:4404
msgid " Mirror Ref. Point"
msgstr " Mirror Ref. Point"

#: flatcamGUI/PreferencesUI.py:4406
msgid ""
"Coordinates in format (x, y) used as reference for mirroring.\n"
"The 'x' in (x, y) will be used when using Flip on X and\n"
"the 'y' in (x, y) will be used when using Flip on Y and"
msgstr ""
"Coordinates in format (x, y) used as reference for mirroring.\n"
"The 'x' in (x, y) will be used when using Flip on X and\n"
"the 'y' in (x, y) will be used when using Flip on Y and"

#: flatcamGUI/PreferencesUI.py:4423
msgid "SolderPaste Tool Options"
msgstr "SolderPaste Tool Options"

#: flatcamGUI/PreferencesUI.py:4428
msgid ""
"A tool to create GCode for dispensing\n"
"solder paste onto a PCB."
msgstr ""
"A tool to create GCode for dispensing\n"
"solder paste onto a PCB."

#: flatcamGUI/PreferencesUI.py:4439
msgid "Diameters of nozzle tools, separated by ','"
msgstr "Diameters of nozzle tools, separated by ','"

#: flatcamGUI/PreferencesUI.py:4446
msgid "New Nozzle Dia"
msgstr "New Nozzle Dia"

#: flatcamGUI/PreferencesUI.py:4448 flatcamTools/ToolSolderPaste.py:103
msgid "Diameter for the new Nozzle tool to add in the Tool Table"
msgstr "Diameter for the new Nozzle tool to add in the Tool Table"

#: flatcamGUI/PreferencesUI.py:4456 flatcamTools/ToolSolderPaste.py:166
msgid "Z Dispense Start"
msgstr "Z Dispense Start"

#: flatcamGUI/PreferencesUI.py:4458 flatcamTools/ToolSolderPaste.py:168
msgid "The height (Z) when solder paste dispensing starts."
msgstr "The height (Z) when solder paste dispensing starts."

#: flatcamGUI/PreferencesUI.py:4465 flatcamTools/ToolSolderPaste.py:174
msgid "Z Dispense"
msgstr "Z Dispense"

#: flatcamGUI/PreferencesUI.py:4467 flatcamTools/ToolSolderPaste.py:176
msgid "The height (Z) when doing solder paste dispensing."
msgstr "The height (Z) when doing solder paste dispensing."

#: flatcamGUI/PreferencesUI.py:4474 flatcamTools/ToolSolderPaste.py:182
msgid "Z Dispense Stop"
msgstr "Z Dispense Stop"

#: flatcamGUI/PreferencesUI.py:4476 flatcamTools/ToolSolderPaste.py:184
msgid "The height (Z) when solder paste dispensing stops."
msgstr "The height (Z) when solder paste dispensing stops."

#: flatcamGUI/PreferencesUI.py:4483 flatcamTools/ToolSolderPaste.py:190
msgid "Z Travel"
msgstr "Z Travel"

#: flatcamGUI/PreferencesUI.py:4485 flatcamTools/ToolSolderPaste.py:192
msgid ""
"The height (Z) for travel between pads\n"
"(without dispensing solder paste)."
msgstr ""
"The height (Z) for travel between pads\n"
"(without dispensing solder paste)."

#: flatcamGUI/PreferencesUI.py:4493 flatcamTools/ToolSolderPaste.py:199
msgid "Z Toolchange"
msgstr "Z Toolchange"

#: flatcamGUI/PreferencesUI.py:4495 flatcamTools/ToolSolderPaste.py:201
msgid "The height (Z) for tool (nozzle) change."
msgstr "The height (Z) for tool (nozzle) change."

#: flatcamGUI/PreferencesUI.py:4504 flatcamTools/ToolSolderPaste.py:209
msgid ""
"The X,Y location for tool (nozzle) change.\n"
"The format is (x, y) where x and y are real numbers."
msgstr ""
"The X,Y location for tool (nozzle) change.\n"
"The format is (x, y) where x and y are real numbers."

#: flatcamGUI/PreferencesUI.py:4512 flatcamTools/ToolSolderPaste.py:216
msgid "Feedrate X-Y"
msgstr "Feedrate X-Y"

#: flatcamGUI/PreferencesUI.py:4514 flatcamTools/ToolSolderPaste.py:218
msgid "Feedrate (speed) while moving on the X-Y plane."
msgstr "Feedrate (speed) while moving on the X-Y plane."

#: flatcamGUI/PreferencesUI.py:4523 flatcamTools/ToolSolderPaste.py:226
msgid ""
"Feedrate (speed) while moving vertically\n"
"(on Z plane)."
msgstr ""
"Feedrate (speed) while moving vertically\n"
"(on Z plane)."

#: flatcamGUI/PreferencesUI.py:4531 flatcamTools/ToolSolderPaste.py:233
msgid "Feedrate Z Dispense"
msgstr "Feedrate Z Dispense"

#: flatcamGUI/PreferencesUI.py:4533
msgid ""
"Feedrate (speed) while moving up vertically\n"
"to Dispense position (on Z plane)."
msgstr ""
"Feedrate (speed) while moving up vertically\n"
"to Dispense position (on Z plane)."

#: flatcamGUI/PreferencesUI.py:4541 flatcamTools/ToolSolderPaste.py:242
msgid "Spindle Speed FWD"
msgstr "Spindle Speed FWD"

#: flatcamGUI/PreferencesUI.py:4543 flatcamTools/ToolSolderPaste.py:244
msgid ""
"The dispenser speed while pushing solder paste\n"
"through the dispenser nozzle."
msgstr ""
"The dispenser speed while pushing solder paste\n"
"through the dispenser nozzle."

#: flatcamGUI/PreferencesUI.py:4551 flatcamTools/ToolSolderPaste.py:251
msgid "Dwell FWD"
msgstr "Dwell FWD"

#: flatcamGUI/PreferencesUI.py:4553 flatcamTools/ToolSolderPaste.py:253
msgid "Pause after solder dispensing."
msgstr "Pause after solder dispensing."

#: flatcamGUI/PreferencesUI.py:4560 flatcamTools/ToolSolderPaste.py:259
msgid "Spindle Speed REV"
msgstr "Spindle Speed REV"

#: flatcamGUI/PreferencesUI.py:4562 flatcamTools/ToolSolderPaste.py:261
msgid ""
"The dispenser speed while retracting solder paste\n"
"through the dispenser nozzle."
msgstr ""
"The dispenser speed while retracting solder paste\n"
"through the dispenser nozzle."

#: flatcamGUI/PreferencesUI.py:4570 flatcamTools/ToolSolderPaste.py:268
msgid "Dwell REV"
msgstr "Dwell REV"

#: flatcamGUI/PreferencesUI.py:4572 flatcamTools/ToolSolderPaste.py:270
msgid ""
"Pause after solder paste dispenser retracted,\n"
"to allow pressure equilibrium."
msgstr ""
"Pause after solder paste dispenser retracted,\n"
"to allow pressure equilibrium."

#: flatcamGUI/PreferencesUI.py:4581 flatcamTools/ToolSolderPaste.py:278
msgid "Files that control the GCode generation."
msgstr "Files that control the GCode generation."

#: flatcamGUI/PreferencesUI.py:4596
msgid "Substractor Tool Options"
msgstr "Substractor Tool Options"

#: flatcamGUI/PreferencesUI.py:4601
msgid ""
"A tool to substract one Gerber or Geometry object\n"
"from another of the same type."
msgstr ""
"A tool to substract one Gerber or Geometry object\n"
"from another of the same type."

#: flatcamGUI/PreferencesUI.py:4606 flatcamTools/ToolSub.py:135
msgid "Close paths"
msgstr "Close paths"

#: flatcamGUI/PreferencesUI.py:4607 flatcamTools/ToolSub.py:136
msgid ""
"Checking this will close the paths cut by the Geometry substractor object."
msgstr ""
"Checking this will close the paths cut by the Geometry substractor object."

#: flatcamGUI/PreferencesUI.py:4618
msgid "Excellon File associations"
msgstr "Excellon File associations"

#: flatcamGUI/PreferencesUI.py:4630 flatcamGUI/PreferencesUI.py:4702
#: flatcamGUI/PreferencesUI.py:4771 flatcamGUI/PreferencesUI.py:4840
msgid "Restore"
msgstr "Restore"

#: flatcamGUI/PreferencesUI.py:4631 flatcamGUI/PreferencesUI.py:4703
#: flatcamGUI/PreferencesUI.py:4772
msgid "Restore the extension list to the default state."
msgstr "Restore the extension list to the default state."

#: flatcamGUI/PreferencesUI.py:4632 flatcamGUI/PreferencesUI.py:4704
#: flatcamGUI/PreferencesUI.py:4773 flatcamGUI/PreferencesUI.py:4842
msgid "Delete All"
msgstr "Delete All"

#: flatcamGUI/PreferencesUI.py:4633 flatcamGUI/PreferencesUI.py:4705
#: flatcamGUI/PreferencesUI.py:4774
msgid "Delete all extensions from the list."
msgstr "Delete all extensions from the list."

#: flatcamGUI/PreferencesUI.py:4641 flatcamGUI/PreferencesUI.py:4713
#: flatcamGUI/PreferencesUI.py:4782
msgid "Extensions list"
msgstr "Extensions list"

#: flatcamGUI/PreferencesUI.py:4643 flatcamGUI/PreferencesUI.py:4715
#: flatcamGUI/PreferencesUI.py:4784
msgid ""
"List of file extensions to be\n"
"associated with FlatCAM."
msgstr ""
"List of file extensions to be\n"
"associated with FlatCAM."

#: flatcamGUI/PreferencesUI.py:4663 flatcamGUI/PreferencesUI.py:4735
#: flatcamGUI/PreferencesUI.py:4803 flatcamGUI/PreferencesUI.py:4874
msgid "Extension"
msgstr "Extension"

#: flatcamGUI/PreferencesUI.py:4664 flatcamGUI/PreferencesUI.py:4736
#: flatcamGUI/PreferencesUI.py:4804
msgid "A file extension to be added or deleted to the list."
msgstr "A file extension to be added or deleted to the list."

#: flatcamGUI/PreferencesUI.py:4672 flatcamGUI/PreferencesUI.py:4744
#: flatcamGUI/PreferencesUI.py:4812
msgid "Add Extension"
msgstr "Add Extension"

#: flatcamGUI/PreferencesUI.py:4673 flatcamGUI/PreferencesUI.py:4745
#: flatcamGUI/PreferencesUI.py:4813
msgid "Add a file extension to the list"
msgstr "Add a file extension to the list"

#: flatcamGUI/PreferencesUI.py:4674 flatcamGUI/PreferencesUI.py:4746
#: flatcamGUI/PreferencesUI.py:4814
msgid "Delete Extension"
msgstr "Delete Extension"

#: flatcamGUI/PreferencesUI.py:4675 flatcamGUI/PreferencesUI.py:4747
#: flatcamGUI/PreferencesUI.py:4815
msgid "Delete a file extension from the list"
msgstr "Delete a file extension from the list"

#: flatcamGUI/PreferencesUI.py:4682 flatcamGUI/PreferencesUI.py:4754
#: flatcamGUI/PreferencesUI.py:4822
msgid "Apply Association"
msgstr "Apply Association"

#: flatcamGUI/PreferencesUI.py:4683 flatcamGUI/PreferencesUI.py:4755
#: flatcamGUI/PreferencesUI.py:4823
msgid ""
"Apply the file associations between\n"
"FlatCAM and the files with above extensions.\n"
"They will be active after next logon.\n"
"This work only in Windows."
msgstr ""
"Apply the file associations between\n"
"FlatCAM and the files with above extensions.\n"
"They will be active after next logon.\n"
"This work only in Windows."

#: flatcamGUI/PreferencesUI.py:4700
msgid "GCode File associations"
msgstr "GCode File associations"

#: flatcamGUI/PreferencesUI.py:4769
msgid "Gerber File associations"
msgstr "Gerber File associations"

#: flatcamGUI/PreferencesUI.py:4838
msgid "Autocompleter Keywords"
msgstr "Autocompleter Keywords"

#: flatcamGUI/PreferencesUI.py:4841
msgid "Restore the autocompleter keywords list to the default state."
msgstr "Restore the autocompleter keywords list to the default state."

#: flatcamGUI/PreferencesUI.py:4843
msgid "Delete all autocompleter keywords from the list."
msgstr "Delete all autocompleter keywords from the list."

#: flatcamGUI/PreferencesUI.py:4851
msgid "Keywords list"
msgstr "Keywords list"

#: flatcamGUI/PreferencesUI.py:4853
msgid ""
"List of keywords used by\n"
"the autocompleter in FlatCAM.\n"
"The autocompleter is installed\n"
"in the Code Editor and for the Tcl Shell."
msgstr ""
"List of keywords used by\n"
"the autocompleter in FlatCAM.\n"
"The autocompleter is installed\n"
"in the Code Editor and for the Tcl Shell."

#: flatcamGUI/PreferencesUI.py:4875
msgid "A keyword to be added or deleted to the list."
msgstr "A keyword to be added or deleted to the list."

#: flatcamGUI/PreferencesUI.py:4883
msgid "Add keyword"
msgstr "Add keyword"

#: flatcamGUI/PreferencesUI.py:4884
msgid "Add a keyword to the list"
msgstr "Add a keyword to the list"

#: flatcamGUI/PreferencesUI.py:4885
msgid "Delete keyword"
msgstr "Delete keyword"

#: flatcamGUI/PreferencesUI.py:4886
msgid "Delete a keyword from the list"
msgstr "Delete a keyword from the list"

#: flatcamParsers/ParseExcellon.py:295
msgid "This is GCODE mark"
msgstr "This is GCODE mark"

#: flatcamParsers/ParseExcellon.py:411
msgid ""
"No tool diameter info's. See shell.\n"
"A tool change event: T"
msgstr ""
"No tool diameter info's. See shell.\n"
"A tool change event: T"

#: flatcamParsers/ParseExcellon.py:414
msgid ""
"was found but the Excellon file have no informations regarding the tool "
"diameters therefore the application will try to load it by using some 'fake' "
"diameters.\n"
"The user needs to edit the resulting Excellon object and change the "
"diameters to reflect the real diameters."
msgstr ""
"was found but the Excellon file have no informations regarding the tool "
"diameters therefore the application will try to load it by using some 'fake' "
"diameters.\n"
"The user needs to edit the resulting Excellon object and change the "
"diameters to reflect the real diameters."

#: flatcamParsers/ParseExcellon.py:869
#, python-brace-format
msgid ""
"{e_code} Excellon Parser error.\n"
"Parsing Failed. Line {l_nr}: {line}\n"
msgstr ""
"{e_code} Excellon Parser error.\n"
"Parsing Failed. Line {l_nr}: {line}\n"

#: flatcamParsers/ParseExcellon.py:952
msgid ""
"Excellon.create_geometry() -> a drill location was skipped due of not having "
"a tool associated.\n"
"Check the resulting GCode."
msgstr ""
"Excellon.create_geometry() -> a drill location was skipped due of not having "
"a tool associated.\n"
"Check the resulting GCode."

#: flatcamParsers/ParseFont.py:305
msgid "Font not supported, try another one."
msgstr "Font not supported, try another one."

#: flatcamParsers/ParseGerber.py:400
msgid "Gerber processing. Parsing"
msgstr "Gerber processing. Parsing"

#: flatcamParsers/ParseGerber.py:400
msgid "lines"
msgstr "lines"

#: flatcamParsers/ParseGerber.py:925 flatcamParsers/ParseGerber.py:1020
msgid "Coordinates missing, line ignored"
msgstr "Coordinates missing, line ignored"

#: flatcamParsers/ParseGerber.py:927 flatcamParsers/ParseGerber.py:1022
msgid "GERBER file might be CORRUPT. Check the file !!!"
msgstr "GERBER file might be CORRUPT. Check the file !!!"

#: flatcamParsers/ParseGerber.py:976
msgid ""
"Region does not have enough points. File will be processed but there are "
"parser errors. Line number"
msgstr ""
"Region does not have enough points. File will be processed but there are "
"parser errors. Line number"

#: flatcamParsers/ParseGerber.py:1374
msgid "Gerber processing. Joining polygons"
msgstr "Gerber processing. Joining polygons"

#: flatcamParsers/ParseGerber.py:1391
msgid "Gerber processing. Applying Gerber polarity."
msgstr "Gerber processing. Applying Gerber polarity."

#: flatcamParsers/ParseGerber.py:1430
msgid "Gerber Line"
msgstr "Gerber Line"

#: flatcamParsers/ParseGerber.py:1430
msgid "Gerber Line Content"
msgstr "Gerber Line Content"

#: flatcamParsers/ParseGerber.py:1432
msgid "Gerber Parser ERROR"
msgstr "Gerber Parser ERROR"

#: flatcamParsers/ParseGerber.py:1681
msgid "Gerber Scale done."
msgstr "Gerber Scale done."

#: flatcamParsers/ParseGerber.py:1771
msgid "Gerber Offset done."
msgstr "Gerber Offset done."

#: flatcamParsers/ParseGerber.py:1848
msgid "Gerber Mirror done."
msgstr "Gerber Mirror done."

#: flatcamParsers/ParseGerber.py:1920
msgid "Gerber Skew done."
msgstr "Gerber Skew done."

#: flatcamParsers/ParseGerber.py:1981
msgid "Gerber Rotate done."
msgstr "Gerber Rotate done."

#: flatcamTools/ToolCalculators.py:24
msgid "Calculators"
msgstr "Calculators"

#: flatcamTools/ToolCalculators.py:26
msgid "Units Calculator"
msgstr "Units Calculator"

#: flatcamTools/ToolCalculators.py:70
msgid "Here you enter the value to be converted from INCH to MM"
msgstr "Here you enter the value to be converted from INCH to MM"

#: flatcamTools/ToolCalculators.py:75
msgid "Here you enter the value to be converted from MM to INCH"
msgstr "Here you enter the value to be converted from MM to INCH"

#: flatcamTools/ToolCalculators.py:107
msgid ""
"This is the angle of the tip of the tool.\n"
"It is specified by manufacturer."
msgstr ""
"This is the angle of the tip of the tool.\n"
"It is specified by manufacturer."

#: flatcamTools/ToolCalculators.py:116
msgid ""
"This is the depth to cut into the material.\n"
"In the CNCJob is the CutZ parameter."
msgstr ""
"This is the depth to cut into the material.\n"
"In the CNCJob is the CutZ parameter."

#: flatcamTools/ToolCalculators.py:119
msgid "Tool Diameter"
msgstr "Tool Diameter"

#: flatcamTools/ToolCalculators.py:124
msgid ""
"This is the tool diameter to be entered into\n"
"FlatCAM Gerber section.\n"
"In the CNCJob section it is called >Tool dia<."
msgstr ""
"This is the tool diameter to be entered into\n"
"FlatCAM Gerber section.\n"
"In the CNCJob section it is called >Tool dia<."

#: flatcamTools/ToolCalculators.py:135 flatcamTools/ToolCalculators.py:221
msgid "Calculate"
msgstr "Calculate"

#: flatcamTools/ToolCalculators.py:138
msgid ""
"Calculate either the Cut Z or the effective tool diameter,\n"
"  depending on which is desired and which is known. "
msgstr ""
"Calculate either the Cut Z or the effective tool diameter,\n"
"  depending on which is desired and which is known. "

#: flatcamTools/ToolCalculators.py:195
msgid "Current Value"
msgstr "Current Value"

#: flatcamTools/ToolCalculators.py:200
msgid ""
"This is the current intensity value\n"
"to be set on the Power Supply. In Amps."
msgstr ""
"This is the current intensity value\n"
"to be set on the Power Supply. In Amps."

#: flatcamTools/ToolCalculators.py:204
msgid "Time"
msgstr "Time"

#: flatcamTools/ToolCalculators.py:209
msgid ""
"This is the calculated time required for the procedure.\n"
"In minutes."
msgstr ""
"This is the calculated time required for the procedure.\n"
"In minutes."

#: flatcamTools/ToolCalculators.py:224
msgid ""
"Calculate the current intensity value and the procedure time,\n"
"depending on the parameters above"
msgstr ""
"Calculate the current intensity value and the procedure time,\n"
"depending on the parameters above"

#: flatcamTools/ToolCalculators.py:271
msgid "Calc. Tool"
msgstr "Calc. Tool"

#: flatcamTools/ToolCutOut.py:18
msgid "Cutout PCB"
msgstr "Cutout PCB"

#: flatcamTools/ToolCutOut.py:56
msgid ""
"Specify the type of object to be cutout.\n"
"It can be of type: Gerber or Geometry.\n"
"What is selected here will dictate the kind\n"
"of objects that will populate the 'Object' combobox."
msgstr ""
"Specify the type of object to be cutout.\n"
"It can be of type: Gerber or Geometry.\n"
"What is selected here will dictate the kind\n"
"of objects that will populate the 'Object' combobox."

#: flatcamTools/ToolCutOut.py:72
msgid "Object to be cutout.                        "
msgstr "Object to be cutout.                        "

#: flatcamTools/ToolCutOut.py:105
msgid "Margin:"
msgstr "Margin:"

#: flatcamTools/ToolCutOut.py:117
msgid "Gap size:"
msgstr "Gap size:"

#: flatcamTools/ToolCutOut.py:144
msgid "A. Automatic Bridge Gaps"
msgstr "A. Automatic Bridge Gaps"

#: flatcamTools/ToolCutOut.py:146
msgid "This section handle creation of automatic bridge gaps."
msgstr "This section handle creation of automatic bridge gaps."

#: flatcamTools/ToolCutOut.py:157
msgid ""
"Number of gaps used for the Automatic cutout.\n"
"There can be maximum 8 bridges/gaps.\n"
"The choices are:\n"
"- None  - no gaps\n"
"- lr    - left + right\n"
"- tb    - top + bottom\n"
"- 4     - left + right +top + bottom\n"
"- 2lr   - 2*left + 2*right\n"
"- 2tb  - 2*top + 2*bottom\n"
"- 8     - 2*left + 2*right +2*top + 2*bottom"
msgstr ""
"Number of gaps used for the Automatic cutout.\n"
"There can be maximum 8 bridges/gaps.\n"
"The choices are:\n"
"- None  - no gaps\n"
"- lr    - left + right\n"
"- tb    - top + bottom\n"
"- 4     - left + right +top + bottom\n"
"- 2lr   - 2*left + 2*right\n"
"- 2tb  - 2*top + 2*bottom\n"
"- 8     - 2*left + 2*right +2*top + 2*bottom"

#: flatcamTools/ToolCutOut.py:181
msgid "FreeForm"
msgstr "FreeForm"

#: flatcamTools/ToolCutOut.py:183
msgid ""
"The cutout shape can be of ny shape.\n"
"Useful when the PCB has a non-rectangular shape."
msgstr ""
"The cutout shape can be of ny shape.\n"
"Useful when the PCB has a non-rectangular shape."

#: flatcamTools/ToolCutOut.py:192
msgid ""
"Cutout the selected object.\n"
"The cutout shape can be of any shape.\n"
"Useful when the PCB has a non-rectangular shape."
msgstr ""
"Cutout the selected object.\n"
"The cutout shape can be of any shape.\n"
"Useful when the PCB has a non-rectangular shape."

#: flatcamTools/ToolCutOut.py:201
msgid "Rectangular"
msgstr "Rectangular"

#: flatcamTools/ToolCutOut.py:203
msgid ""
"The resulting cutout shape is\n"
"always a rectangle shape and it will be\n"
"the bounding box of the Object."
msgstr ""
"The resulting cutout shape is\n"
"always a rectangle shape and it will be\n"
"the bounding box of the Object."

#: flatcamTools/ToolCutOut.py:212
msgid ""
"Cutout the selected object.\n"
"The resulting cutout shape is\n"
"always a rectangle shape and it will be\n"
"the bounding box of the Object."
msgstr ""
"Cutout the selected object.\n"
"The resulting cutout shape is\n"
"always a rectangle shape and it will be\n"
"the bounding box of the Object."

#: flatcamTools/ToolCutOut.py:220
msgid "B. Manual Bridge Gaps"
msgstr "B. Manual Bridge Gaps"

#: flatcamTools/ToolCutOut.py:222
msgid ""
"This section handle creation of manual bridge gaps.\n"
"This is done by mouse clicking on the perimeter of the\n"
"Geometry object that is used as a cutout object. "
msgstr ""
"This section handle creation of manual bridge gaps.\n"
"This is done by mouse clicking on the perimeter of the\n"
"Geometry object that is used as a cutout object. "

#: flatcamTools/ToolCutOut.py:238
msgid "Geo Obj"
msgstr "Geo Obj"

#: flatcamTools/ToolCutOut.py:240
msgid "Geometry object used to create the manual cutout."
msgstr "Geometry object used to create the manual cutout."

#: flatcamTools/ToolCutOut.py:251
msgid "Manual Geo"
msgstr "Manual Geo"

#: flatcamTools/ToolCutOut.py:253 flatcamTools/ToolCutOut.py:263
msgid ""
"If the object to be cutout is a Gerber\n"
"first create a Geometry that surrounds it,\n"
"to be used as the cutout, if one doesn't exist yet.\n"
"Select the source Gerber file in the top object combobox."
msgstr ""
"If the object to be cutout is a Gerber\n"
"first create a Geometry that surrounds it,\n"
"to be used as the cutout, if one doesn't exist yet.\n"
"Select the source Gerber file in the top object combobox."

#: flatcamTools/ToolCutOut.py:273
msgid "Manual Add Bridge Gaps"
msgstr "Manual Add Bridge Gaps"

#: flatcamTools/ToolCutOut.py:275
msgid ""
"Use the left mouse button (LMB) click\n"
"to create a bridge gap to separate the PCB from\n"
"the surrounding material."
msgstr ""
"Use the left mouse button (LMB) click\n"
"to create a bridge gap to separate the PCB from\n"
"the surrounding material."

#: flatcamTools/ToolCutOut.py:282
msgid "Generate Gap"
msgstr "Generate Gap"

#: flatcamTools/ToolCutOut.py:284
msgid ""
"Use the left mouse button (LMB) click\n"
"to create a bridge gap to separate the PCB from\n"
"the surrounding material.\n"
"The LMB click has to be done on the perimeter of\n"
"the Geometry object used as a cutout geometry."
msgstr ""
"Use the left mouse button (LMB) click\n"
"to create a bridge gap to separate the PCB from\n"
"the surrounding material.\n"
"The LMB click has to be done on the perimeter of\n"
"the Geometry object used as a cutout geometry."

#: flatcamTools/ToolCutOut.py:383 flatcamTools/ToolCutOut.py:554
#: flatcamTools/ToolNonCopperClear.py:1147
#: flatcamTools/ToolNonCopperClear.py:1188
#: flatcamTools/ToolNonCopperClear.py:1220 flatcamTools/ToolPaint.py:1083
#: flatcamTools/ToolPanelize.py:359 flatcamTools/ToolPanelize.py:376
#: flatcamTools/ToolSub.py:254 flatcamTools/ToolSub.py:269
#: flatcamTools/ToolSub.py:456 flatcamTools/ToolSub.py:471
#: tclCommands/TclCommandCopperClear.py:131
#: tclCommands/TclCommandCopperClear.py:208 tclCommands/TclCommandPaint.py:133
msgid "Could not retrieve object"
msgstr "Could not retrieve object"

#: flatcamTools/ToolCutOut.py:388
msgid ""
"There is no object selected for Cutout.\n"
"Select one and try again."
msgstr ""
"There is no object selected for Cutout.\n"
"Select one and try again."

#: flatcamTools/ToolCutOut.py:394 flatcamTools/ToolCutOut.py:563
#: flatcamTools/ToolCutOut.py:704 flatcamTools/ToolCutOut.py:786
msgid "Tool Diameter is zero value. Change it to a positive real number."
msgstr "Tool Diameter is zero value. Change it to a positive real number."

#: flatcamTools/ToolCutOut.py:408 flatcamTools/ToolCutOut.py:578
msgid "Number of gaps value is missing. Add it and retry."
msgstr "Number of gaps value is missing. Add it and retry."

#: flatcamTools/ToolCutOut.py:413 flatcamTools/ToolCutOut.py:582
msgid ""
"Gaps value can be only one of: 'None', 'lr', 'tb', '2lr', '2tb', 4 or 8. "
"Fill in a correct value and retry. "
msgstr ""
"Gaps value can be only one of: 'None', 'lr', 'tb', '2lr', '2tb', 4 or 8. "
"Fill in a correct value and retry. "

#: flatcamTools/ToolCutOut.py:418 flatcamTools/ToolCutOut.py:588
msgid ""
"Cutout operation cannot be done on a multi-geo Geometry.\n"
"Optionally, this Multi-geo Geometry can be converted to Single-geo "
"Geometry,\n"
"and after that perform Cutout."
msgstr ""
"Cutout operation cannot be done on a multi-geo Geometry.\n"
"Optionally, this Multi-geo Geometry can be converted to Single-geo "
"Geometry,\n"
"and after that perform Cutout."

#: flatcamTools/ToolCutOut.py:537 flatcamTools/ToolCutOut.py:693
msgid "Any form CutOut operation finished."
msgstr "Any form CutOut operation finished."

#: flatcamTools/ToolCutOut.py:558 flatcamTools/ToolNonCopperClear.py:1151
#: flatcamTools/ToolPaint.py:979 flatcamTools/ToolPanelize.py:366
#: tclCommands/TclCommandBbox.py:66 tclCommands/TclCommandNregions.py:65
msgid "Object not found"
msgstr "Object not found"

#: flatcamTools/ToolCutOut.py:698
msgid ""
"Click on the selected geometry object perimeter to create a bridge gap ..."
msgstr ""
"Click on the selected geometry object perimeter to create a bridge gap ..."

#: flatcamTools/ToolCutOut.py:715 flatcamTools/ToolCutOut.py:741
msgid "Could not retrieve Geometry object"
msgstr "Could not retrieve Geometry object"

#: flatcamTools/ToolCutOut.py:746
msgid "Geometry object for manual cutout not found"
msgstr "Geometry object for manual cutout not found"

#: flatcamTools/ToolCutOut.py:756
msgid "Added manual Bridge Gap."
msgstr "Added manual Bridge Gap."

#: flatcamTools/ToolCutOut.py:768
msgid "Could not retrieve Gerber object"
msgstr "Could not retrieve Gerber object"

#: flatcamTools/ToolCutOut.py:773
msgid ""
"There is no Gerber object selected for Cutout.\n"
"Select one and try again."
msgstr ""
"There is no Gerber object selected for Cutout.\n"
"Select one and try again."

#: flatcamTools/ToolCutOut.py:779
msgid ""
"The selected object has to be of Gerber type.\n"
"Select a Gerber file and try again."
msgstr ""
"The selected object has to be of Gerber type.\n"
"Select a Gerber file and try again."

#: flatcamTools/ToolCutOut.py:814
msgid "Geometry not supported for cutout"
msgstr "Geometry not supported for cutout"

#: flatcamTools/ToolCutOut.py:866
msgid "Making manual bridge gap..."
msgstr "Making manual bridge gap..."

#: flatcamTools/ToolDblSided.py:18
msgid "2-Sided PCB"
msgstr "2-Sided PCB"

#: flatcamTools/ToolDblSided.py:53 flatcamTools/ToolDblSided.py:77
#: flatcamTools/ToolDblSided.py:101
msgid "Mirror"
msgstr "Mirror"

#: flatcamTools/ToolDblSided.py:55 flatcamTools/ToolDblSided.py:79
#: flatcamTools/ToolDblSided.py:103
msgid ""
"Mirrors (flips) the specified object around \n"
"the specified axis. Does not create a new \n"
"object, but modifies it."
msgstr ""
"Mirrors (flips) the specified object around \n"
"the specified axis. Does not create a new \n"
"object, but modifies it."

#: flatcamTools/ToolDblSided.py:74
msgid "Excellon Object to be mirrored."
msgstr "Excellon Object to be mirrored."

#: flatcamTools/ToolDblSided.py:98
msgid "Geometry Obj to be mirrored."
msgstr "Geometry Obj to be mirrored."

#: flatcamTools/ToolDblSided.py:134
msgid "Axis Ref:"
msgstr "Axis Ref:"

#: flatcamTools/ToolDblSided.py:153
msgid "Point/Box Reference"
msgstr "Point/Box Reference"

#: flatcamTools/ToolDblSided.py:155
msgid ""
"If 'Point' is selected above it store the coordinates (x, y) through which\n"
"the mirroring axis passes.\n"
"If 'Box' is selected above, select here a FlatCAM object (Gerber, Exc or "
"Geo).\n"
"Through the center of this object pass the mirroring axis selected above."
msgstr ""
"If 'Point' is selected above it store the coordinates (x, y) through which\n"
"the mirroring axis passes.\n"
"If 'Box' is selected above, select here a FlatCAM object (Gerber, Exc or "
"Geo).\n"
"Through the center of this object pass the mirroring axis selected above."

#: flatcamTools/ToolDblSided.py:163
msgid ""
"Add the coordinates in format <b>(x, y)</b> through which the mirroring "
"axis \n"
" selected in 'MIRROR AXIS' pass.\n"
"The (x, y) coordinates are captured by pressing SHIFT key\n"
"and left mouse button click on canvas or you can enter the coords manually."
msgstr ""
"Add the coordinates in format <b>(x, y)</b> through which the mirroring "
"axis \n"
" selected in 'MIRROR AXIS' pass.\n"
"The (x, y) coordinates are captured by pressing SHIFT key\n"
"and left mouse button click on canvas or you can enter the coords manually."

#: flatcamTools/ToolDblSided.py:183 flatcamTools/ToolNonCopperClear.py:438
#: flatcamTools/ToolPaint.py:322
msgid "Gerber   Reference Box Object"
msgstr "Gerber   Reference Box Object"

#: flatcamTools/ToolDblSided.py:184 flatcamTools/ToolNonCopperClear.py:439
#: flatcamTools/ToolPaint.py:323
msgid "Excellon Reference Box Object"
msgstr "Excellon Reference Box Object"

#: flatcamTools/ToolDblSided.py:185 flatcamTools/ToolNonCopperClear.py:440
#: flatcamTools/ToolPaint.py:324
msgid "Geometry Reference Box Object"
msgstr "Geometry Reference Box Object"

#: flatcamTools/ToolDblSided.py:193
msgid "Alignment Drill Coordinates"
msgstr "Alignment Drill Coordinates"

#: flatcamTools/ToolDblSided.py:195
msgid ""
"Alignment holes (x1, y1), (x2, y2), ... on one side of the mirror axis. For "
"each set of (x, y) coordinates\n"
"entered here, a pair of drills will be created:\n"
"\n"
"- one drill at the coordinates from the field\n"
"- one drill in mirror position over the axis selected above in the 'Mirror "
"Axis'."
msgstr ""
"Alignment holes (x1, y1), (x2, y2), ... on one side of the mirror axis. For "
"each set of (x, y) coordinates\n"
"entered here, a pair of drills will be created:\n"
"\n"
"- one drill at the coordinates from the field\n"
"- one drill in mirror position over the axis selected above in the 'Mirror "
"Axis'."

#: flatcamTools/ToolDblSided.py:210
msgid ""
"Add alignment drill holes coords in the format: (x1, y1), (x2, y2), ... \n"
"on one side of the mirror axis.\n"
"\n"
"The coordinates set can be obtained:\n"
"- press SHIFT key and left mouse clicking on canvas. Then click Add.\n"
"- press SHIFT key and left mouse clicking on canvas. Then CTRL+V in the "
"field.\n"
"- press SHIFT key and left mouse clicking on canvas. Then RMB click in the "
"field and click Paste.\n"
"- by entering the coords manually in the format: (x1, y1), (x2, y2), ..."
msgstr ""
"Add alignment drill holes coords in the format: (x1, y1), (x2, y2), ... \n"
"on one side of the mirror axis.\n"
"\n"
"The coordinates set can be obtained:\n"
"- press SHIFT key and left mouse clicking on canvas. Then click Add.\n"
"- press SHIFT key and left mouse clicking on canvas. Then CTRL+V in the "
"field.\n"
"- press SHIFT key and left mouse clicking on canvas. Then RMB click in the "
"field and click Paste.\n"
"- by entering the coords manually in the format: (x1, y1), (x2, y2), ..."

#: flatcamTools/ToolDblSided.py:229
msgid "Alignment Drill Diameter"
msgstr "Alignment Drill Diameter"

#: flatcamTools/ToolDblSided.py:252
msgid "Create Excellon Object"
msgstr "Create Excellon Object"

#: flatcamTools/ToolDblSided.py:254
msgid ""
"Creates an Excellon Object containing the\n"
"specified alignment holes and their mirror\n"
"images."
msgstr ""
"Creates an Excellon Object containing the\n"
"specified alignment holes and their mirror\n"
"images."

#: flatcamTools/ToolDblSided.py:260
msgid "Reset"
msgstr "Reset"

#: flatcamTools/ToolDblSided.py:262
msgid "Resets all the fields."
msgstr "Resets all the fields."

#: flatcamTools/ToolDblSided.py:312
msgid "2-Sided Tool"
msgstr "2-Sided Tool"

#: flatcamTools/ToolDblSided.py:337
msgid ""
"'Point' reference is selected and 'Point' coordinates are missing. Add them "
"and retry."
msgstr ""
"'Point' reference is selected and 'Point' coordinates are missing. Add them "
"and retry."

#: flatcamTools/ToolDblSided.py:356
msgid "There is no Box reference object loaded. Load one and retry."
msgstr "There is no Box reference object loaded. Load one and retry."

#: flatcamTools/ToolDblSided.py:379
msgid "No value or wrong format in Drill Dia entry. Add it and retry."
msgstr "No value or wrong format in Drill Dia entry. Add it and retry."

#: flatcamTools/ToolDblSided.py:386
msgid "There are no Alignment Drill Coordinates to use. Add them and retry."
msgstr "There are no Alignment Drill Coordinates to use. Add them and retry."

#: flatcamTools/ToolDblSided.py:409
msgid "Excellon object with alignment drills created..."
msgstr "Excellon object with alignment drills created..."

#: flatcamTools/ToolDblSided.py:418 flatcamTools/ToolOptimal.py:303
msgid "There is no Gerber object loaded ..."
msgstr "There is no Gerber object loaded ..."

#: flatcamTools/ToolDblSided.py:422 flatcamTools/ToolDblSided.py:465
#: flatcamTools/ToolDblSided.py:509
msgid "Only Gerber, Excellon and Geometry objects can be mirrored."
msgstr "Only Gerber, Excellon and Geometry objects can be mirrored."

#: flatcamTools/ToolDblSided.py:432
msgid ""
"'Point' coordinates missing. Using Origin (0, 0) as mirroring reference."
msgstr ""
"'Point' coordinates missing. Using Origin (0, 0) as mirroring reference."

#: flatcamTools/ToolDblSided.py:442 flatcamTools/ToolDblSided.py:486
#: flatcamTools/ToolDblSided.py:523
msgid "There is no Box object loaded ..."
msgstr "There is no Box object loaded ..."

#: flatcamTools/ToolDblSided.py:452 flatcamTools/ToolDblSided.py:496
#: flatcamTools/ToolDblSided.py:533
msgid "was mirrored"
msgstr "was mirrored"

#: flatcamTools/ToolDblSided.py:461
msgid "There is no Excellon object loaded ..."
msgstr "There is no Excellon object loaded ..."

#: flatcamTools/ToolDblSided.py:476
msgid ""
"There are no Point coordinates in the Point field. Add coords and try "
"again ..."
msgstr ""
"There are no Point coordinates in the Point field. Add coords and try "
"again ..."

#: flatcamTools/ToolDblSided.py:505
msgid "There is no Geometry object loaded ..."
msgstr "There is no Geometry object loaded ..."

#: flatcamTools/ToolDistance.py:44 flatcamTools/ToolDistanceMin.py:46
msgid "Those are the units in which the distance is measured."
msgstr "Those are the units in which the distance is measured."

#: flatcamTools/ToolDistance.py:45 flatcamTools/ToolDistanceMin.py:47
msgid "METRIC (mm)"
msgstr "METRIC (mm)"

#: flatcamTools/ToolDistance.py:45 flatcamTools/ToolDistanceMin.py:47
msgid "INCH (in)"
msgstr "INCH (in)"

#: flatcamTools/ToolDistance.py:48
msgid "Start Coords"
msgstr "Start Coords"

#: flatcamTools/ToolDistance.py:49 flatcamTools/ToolDistance.py:69
msgid "This is measuring Start point coordinates."
msgstr "This is measuring Start point coordinates."

#: flatcamTools/ToolDistance.py:51
msgid "Stop Coords"
msgstr "Stop Coords"

#: flatcamTools/ToolDistance.py:52 flatcamTools/ToolDistance.py:74
msgid "This is the measuring Stop point coordinates."
msgstr "This is the measuring Stop point coordinates."

#: flatcamTools/ToolDistance.py:54 flatcamTools/ToolDistanceMin.py:58
msgid "Dx"
msgstr "Dx"

#: flatcamTools/ToolDistance.py:55 flatcamTools/ToolDistance.py:79
#: flatcamTools/ToolDistanceMin.py:59 flatcamTools/ToolDistanceMin.py:88
msgid "This is the distance measured over the X axis."
msgstr "This is the distance measured over the X axis."

#: flatcamTools/ToolDistance.py:57 flatcamTools/ToolDistanceMin.py:61
msgid "Dy"
msgstr "Dy"

#: flatcamTools/ToolDistance.py:58 flatcamTools/ToolDistance.py:84
#: flatcamTools/ToolDistanceMin.py:62 flatcamTools/ToolDistanceMin.py:93
msgid "This is the distance measured over the Y axis."
msgstr "This is the distance measured over the Y axis."

#: flatcamTools/ToolDistance.py:61 flatcamTools/ToolDistance.py:89
#: flatcamTools/ToolDistanceMin.py:65 flatcamTools/ToolDistanceMin.py:98
msgid "This is orientation angle of the measuring line."
msgstr "This is orientation angle of the measuring line."

#: flatcamTools/ToolDistance.py:63 flatcamTools/ToolDistanceMin.py:67
msgid "DISTANCE"
msgstr "DISTANCE"

#: flatcamTools/ToolDistance.py:64 flatcamTools/ToolDistance.py:94
msgid "This is the point to point Euclidian distance."
msgstr "This is the point to point Euclidian distance."

#: flatcamTools/ToolDistance.py:96 flatcamTools/ToolDistanceMin.py:110
msgid "Measure"
msgstr "Measure"

#: flatcamTools/ToolDistance.py:202
msgid "MEASURING: Click on the Start point ..."
msgstr "MEASURING: Click on the Start point ..."

#: flatcamTools/ToolDistance.py:335
msgid "MEASURING: Click on the Destination point ..."
msgstr "MEASURING: Click on the Destination point ..."

#: flatcamTools/ToolDistance.py:342 flatcamTools/ToolDistanceMin.py:278
#, python-brace-format
msgid "MEASURING: Result D(x) = {d_x} | D(y) = {d_y} | Distance = {d_z}"
msgstr "MEASURING: Result D(x) = {d_x} | D(y) = {d_y} | Distance = {d_z}"

#: flatcamTools/ToolDistanceMin.py:28 flatcamTools/ToolDistanceMin.py:149
msgid "Minimum Distance Tool"
msgstr "Minimum Distance Tool"

#: flatcamTools/ToolDistanceMin.py:50
msgid "First object point"
msgstr "First object point"

#: flatcamTools/ToolDistanceMin.py:51 flatcamTools/ToolDistanceMin.py:76
msgid ""
"This is first object point coordinates.\n"
"This is the start point for measuring distance."
msgstr ""
"This is first object point coordinates.\n"
"This is the start point for measuring distance."

#: flatcamTools/ToolDistanceMin.py:54
msgid "Second object point"
msgstr "Second object point"

#: flatcamTools/ToolDistanceMin.py:55 flatcamTools/ToolDistanceMin.py:82
msgid ""
"This is second object point coordinates.\n"
"This is the end point for measuring distance."
msgstr ""
"This is second object point coordinates.\n"
"This is the end point for measuring distance."

#: flatcamTools/ToolDistanceMin.py:68 flatcamTools/ToolDistanceMin.py:103
#| msgid "This is the point to point Euclidian distance."
msgid "This is the point to point Euclidean distance."
msgstr "This is the point to point Euclidean distance."

#: flatcamTools/ToolDistanceMin.py:70
#| msgid "Point"
msgid "Half Point"
msgstr "Half Point"

#: flatcamTools/ToolDistanceMin.py:71 flatcamTools/ToolDistanceMin.py:108
#| msgid "This is the point to point Euclidian distance."
msgid "This is the middle point of the point to point Euclidean distance."
msgstr "This is the middle point of the point to point Euclidean distance."

#: flatcamTools/ToolDistanceMin.py:113
#| msgid "Jump to Coordinates"
msgid "Jump to Half Point"
msgstr "Jump to Half Point"

#: flatcamTools/ToolDistanceMin.py:160
msgid ""
"Select two objects and no more, to measure the distance between them ..."
msgstr ""
"Select two objects and no more, to measure the distance between them ..."

#: flatcamTools/ToolDistanceMin.py:201 flatcamTools/ToolDistanceMin.py:211
#: flatcamTools/ToolDistanceMin.py:220 flatcamTools/ToolDistanceMin.py:241
msgid "Select two objects and no more. Currently the selection has objects: "
msgstr "Select two objects and no more. Currently the selection has objects: "

#: flatcamTools/ToolDistanceMin.py:285
msgid "Objects intersects or touch at"
msgstr "Objects intersects or touch at"

#: flatcamTools/ToolDistanceMin.py:291
msgid "Jumped to the half point between the two selected objects"
msgstr "Jumped to the half point between the two selected objects"

#: flatcamTools/ToolFilm.py:29
msgid "Film PCB"
msgstr "Film PCB"

#: flatcamTools/ToolFilm.py:63 flatcamTools/ToolImage.py:53
#: flatcamTools/ToolPanelize.py:56 flatcamTools/ToolProperties.py:143
msgid "Object Type"
msgstr "Object Type"

#: flatcamTools/ToolFilm.py:65
msgid ""
"Specify the type of object for which to create the film.\n"
"The object can be of type: Gerber or Geometry.\n"
"The selection here decide the type of objects that will be\n"
"in the Film Object combobox."
msgstr ""
"Specify the type of object for which to create the film.\n"
"The object can be of type: Gerber or Geometry.\n"
"The selection here decide the type of objects that will be\n"
"in the Film Object combobox."

#: flatcamTools/ToolFilm.py:79
msgid "Film Object"
msgstr "Film Object"

#: flatcamTools/ToolFilm.py:81
msgid "Object for which to create the film."
msgstr "Object for which to create the film."

#: flatcamTools/ToolFilm.py:98
msgid "Box Type:"
msgstr "Box Type:"

#: flatcamTools/ToolFilm.py:100
msgid ""
"Specify the type of object to be used as an container for\n"
"film creation. It can be: Gerber or Geometry type.The selection here decide "
"the type of objects that will be\n"
"in the Box Object combobox."
msgstr ""
"Specify the type of object to be used as an container for\n"
"film creation. It can be: Gerber or Geometry type.The selection here decide "
"the type of objects that will be\n"
"in the Box Object combobox."

#: flatcamTools/ToolFilm.py:114 flatcamTools/ToolPanelize.py:126
msgid "Box Object"
msgstr "Box Object"

#: flatcamTools/ToolFilm.py:116
msgid ""
"The actual object that is used a container for the\n"
" selected object for which we create the film.\n"
"Usually it is the PCB outline but it can be also the\n"
"same object for which the film is created."
msgstr ""
"The actual object that is used a container for the\n"
" selected object for which we create the film.\n"
"Usually it is the PCB outline but it can be also the\n"
"same object for which the film is created."

#: flatcamTools/ToolFilm.py:140
msgid "Positive"
msgstr "Positive"

#: flatcamTools/ToolFilm.py:141
msgid "Negative"
msgstr "Negative"

#: flatcamTools/ToolFilm.py:143
msgid "Film Type:"
msgstr "Film Type:"

#: flatcamTools/ToolFilm.py:176
msgid "Punch drill holes"
msgstr "Punch drill holes"

#: flatcamTools/ToolFilm.py:177
msgid ""
"When checked the generated film will have holes in pads when\n"
"the generated film is positive. This is done to help drilling,\n"
"when done manually."
msgstr ""
"When checked the generated film will have holes in pads when\n"
"the generated film is positive. This is done to help drilling,\n"
"when done manually."

#: flatcamTools/ToolFilm.py:195
#| msgid "View Source"
msgid "Source"
msgstr "Source"

#: flatcamTools/ToolFilm.py:197
msgid ""
"The punch hole source can be:\n"
"- Excellon -> an Excellon holes center will serve as reference.\n"
"- Pad Center -> will try to use the pads center as reference."
msgstr ""
"The punch hole source can be:\n"
"- Excellon -> an Excellon holes center will serve as reference.\n"
"- Pad Center -> will try to use the pads center as reference."

#: flatcamTools/ToolFilm.py:202
msgid "Pad center"
msgstr "Pad center"

#: flatcamTools/ToolFilm.py:207
#| msgid "Excellon Object"
msgid "Excellon Obj"
msgstr "Excellon Obj"

#: flatcamTools/ToolFilm.py:209
msgid ""
"Remove the geometry of Excellon from the Film to create tge holes in pads."
msgstr ""
"Remove the geometry of Excellon from the Film to create tge holes in pads."

#: flatcamTools/ToolFilm.py:221
msgid "Punch Size"
msgstr "Punch Size"

#: flatcamTools/ToolFilm.py:222
msgid "The value here will control how big is the punch hole in the pads."
msgstr "The value here will control how big is the punch hole in the pads."

#: flatcamTools/ToolFilm.py:236
msgid "Save Film"
msgstr "Save Film"

#: flatcamTools/ToolFilm.py:238
msgid ""
"Create a Film for the selected object, within\n"
"the specified box. Does not create a new \n"
" FlatCAM object, but directly save it in SVG format\n"
"which can be opened with Inkscape."
msgstr ""
"Create a Film for the selected object, within\n"
"the specified box. Does not create a new \n"
" FlatCAM object, but directly save it in SVG format\n"
"which can be opened with Inkscape."

#: flatcamTools/ToolFilm.py:339
msgid ""
"Using the Pad center does not work on Geometry objects. Only a Gerber object "
"has pads."
msgstr ""
"Using the Pad center does not work on Geometry objects. Only a Gerber object "
"has pads."

#: flatcamTools/ToolFilm.py:349
msgid "No FlatCAM object selected. Load an object for Film and retry."
msgstr "No FlatCAM object selected. Load an object for Film and retry."

#: flatcamTools/ToolFilm.py:356
msgid "No FlatCAM object selected. Load an object for Box and retry."
msgstr "No FlatCAM object selected. Load an object for Box and retry."

#: flatcamTools/ToolFilm.py:367
msgid "Generating Film ..."
msgstr "Generating Film ..."

#: flatcamTools/ToolFilm.py:382 flatcamTools/ToolFilm.py:386
msgid "Export SVG positive"
msgstr "Export SVG positive"

#: flatcamTools/ToolFilm.py:391
msgid "Export SVG positive cancelled."
msgstr "Export SVG positive cancelled."

#: flatcamTools/ToolFilm.py:407
#| msgid "No FlatCAM object selected. Load an object for Film and retry."
msgid ""
"No Excellon object selected. Load an object for punching reference and retry."
msgstr ""
"No Excellon object selected. Load an object for punching reference and retry."

#: flatcamTools/ToolFilm.py:431
msgid ""
" Could not generate punched hole film because the punch hole sizeis bigger "
"than some of the apertures in the Gerber object."
msgstr ""
" Could not generate punched hole film because the punch hole sizeis bigger "
"than some of the apertures in the Gerber object."

#: flatcamTools/ToolFilm.py:443
msgid ""
"Could not generate punched hole film because the punch hole sizeis bigger "
"than some of the apertures in the Gerber object."
msgstr ""
"Could not generate punched hole film because the punch hole sizeis bigger "
"than some of the apertures in the Gerber object."

#: flatcamTools/ToolFilm.py:461
msgid ""
"Could not generate punched hole film because the newly created object "
"geometry is the same as the one in the source object geometry..."
msgstr ""
"Could not generate punched hole film because the newly created object "
"geometry is the same as the one in the source object geometry..."

#: flatcamTools/ToolFilm.py:483 flatcamTools/ToolFilm.py:487
msgid "Export SVG negative"
msgstr "Export SVG negative"

#: flatcamTools/ToolFilm.py:492
msgid "Export SVG negative cancelled."
msgstr "Export SVG negative cancelled."

#: flatcamTools/ToolImage.py:25
msgid "Image as Object"
msgstr "Image as Object"

#: flatcamTools/ToolImage.py:31
msgid "Image to PCB"
msgstr "Image to PCB"

#: flatcamTools/ToolImage.py:55
msgid ""
"Specify the type of object to create from the image.\n"
"It can be of type: Gerber or Geometry."
msgstr ""
"Specify the type of object to create from the image.\n"
"It can be of type: Gerber or Geometry."

#: flatcamTools/ToolImage.py:63
msgid "DPI value"
msgstr "DPI value"

#: flatcamTools/ToolImage.py:64
msgid "Specify a DPI value for the image."
msgstr "Specify a DPI value for the image."

#: flatcamTools/ToolImage.py:70
msgid "Level of detail"
msgstr "Level of detail"

#: flatcamTools/ToolImage.py:79
msgid "Image type"
msgstr "Image type"

#: flatcamTools/ToolImage.py:81
msgid ""
"Choose a method for the image interpretation.\n"
"B/W means a black & white image. Color means a colored image."
msgstr ""
"Choose a method for the image interpretation.\n"
"B/W means a black & white image. Color means a colored image."

#: flatcamTools/ToolImage.py:90 flatcamTools/ToolImage.py:105
#: flatcamTools/ToolImage.py:118 flatcamTools/ToolImage.py:131
msgid "Mask value"
msgstr "Mask value"

#: flatcamTools/ToolImage.py:92
msgid ""
"Mask for monochrome image.\n"
"Takes values between [0 ... 255].\n"
"Decides the level of details to include\n"
"in the resulting geometry.\n"
"0 means no detail and 255 means everything \n"
"(which is totally black)."
msgstr ""
"Mask for monochrome image.\n"
"Takes values between [0 ... 255].\n"
"Decides the level of details to include\n"
"in the resulting geometry.\n"
"0 means no detail and 255 means everything \n"
"(which is totally black)."

#: flatcamTools/ToolImage.py:107
msgid ""
"Mask for RED color.\n"
"Takes values between [0 ... 255].\n"
"Decides the level of details to include\n"
"in the resulting geometry."
msgstr ""
"Mask for RED color.\n"
"Takes values between [0 ... 255].\n"
"Decides the level of details to include\n"
"in the resulting geometry."

#: flatcamTools/ToolImage.py:120
msgid ""
"Mask for GREEN color.\n"
"Takes values between [0 ... 255].\n"
"Decides the level of details to include\n"
"in the resulting geometry."
msgstr ""
"Mask for GREEN color.\n"
"Takes values between [0 ... 255].\n"
"Decides the level of details to include\n"
"in the resulting geometry."

#: flatcamTools/ToolImage.py:133
msgid ""
"Mask for BLUE color.\n"
"Takes values between [0 ... 255].\n"
"Decides the level of details to include\n"
"in the resulting geometry."
msgstr ""
"Mask for BLUE color.\n"
"Takes values between [0 ... 255].\n"
"Decides the level of details to include\n"
"in the resulting geometry."

#: flatcamTools/ToolImage.py:141
msgid "Import image"
msgstr "Import image"

#: flatcamTools/ToolImage.py:143
msgid "Open a image of raster type and then import it in FlatCAM."
msgstr "Open a image of raster type and then import it in FlatCAM."

#: flatcamTools/ToolImage.py:177
msgid "Image Tool"
msgstr "Image Tool"

#: flatcamTools/ToolImage.py:207 flatcamTools/ToolImage.py:210
msgid "Import IMAGE"
msgstr "Import IMAGE"

#: flatcamTools/ToolMove.py:94
msgid "MOVE: Click on the Start point ..."
msgstr "MOVE: Click on the Start point ..."

#: flatcamTools/ToolMove.py:101
msgid "MOVE action cancelled. No object(s) to move."
msgstr "MOVE action cancelled. No object(s) to move."

#: flatcamTools/ToolMove.py:128
msgid "MOVE: Click on the Destination point ..."
msgstr "MOVE: Click on the Destination point ..."

#: flatcamTools/ToolMove.py:149
msgid "Moving..."
msgstr "Moving..."

#: flatcamTools/ToolMove.py:152
msgid "No object(s) selected."
msgstr "No object(s) selected."

#: flatcamTools/ToolMove.py:199
msgid "Error when mouse left click."
msgstr "Error when mouse left click."

#: flatcamTools/ToolMove.py:247
msgid "Move action cancelled."
msgstr "Move action cancelled."

#: flatcamTools/ToolMove.py:259
msgid "Object(s) not selected"
msgstr "Object(s) not selected"

#: flatcamTools/ToolNonCopperClear.py:26
msgid "Non-Copper Clearing"
msgstr "Non-Copper Clearing"

#: flatcamTools/ToolNonCopperClear.py:72
msgid ""
"Specify the type of object to be cleared of excess copper.\n"
"It can be of type: Gerber or Geometry.\n"
"What is selected here will dictate the kind\n"
"of objects that will populate the 'Object' combobox."
msgstr ""
"Specify the type of object to be cleared of excess copper.\n"
"It can be of type: Gerber or Geometry.\n"
"What is selected here will dictate the kind\n"
"of objects that will populate the 'Object' combobox."

#: flatcamTools/ToolNonCopperClear.py:89
msgid "Object to be cleared of excess copper."
msgstr "Object to be cleared of excess copper."

#: flatcamTools/ToolNonCopperClear.py:99
msgid ""
"Tools pool from which the algorithm\n"
"will pick the ones used for copper clearing."
msgstr ""
"Tools pool from which the algorithm\n"
"will pick the ones used for copper clearing."

#: flatcamTools/ToolNonCopperClear.py:108
msgid "Operation"
msgstr "Operation"

#: flatcamTools/ToolNonCopperClear.py:114
msgid ""
"This is the Tool Number.\n"
"Non copper clearing will start with the tool with the biggest \n"
"diameter, continuing until there are no more tools.\n"
"Only tools that create NCC clearing geometry will still be present\n"
"in the resulting geometry. This is because with some tools\n"
"this function will not be able to create painting geometry."
msgstr ""
"This is the Tool Number.\n"
"Non copper clearing will start with the tool with the biggest \n"
"diameter, continuing until there are no more tools.\n"
"Only tools that create NCC clearing geometry will still be present\n"
"in the resulting geometry. This is because with some tools\n"
"this function will not be able to create painting geometry."

#: flatcamTools/ToolNonCopperClear.py:122
msgid ""
"Tool Diameter. It's value (in current FlatCAM units)\n"
"is the cut width into the material."
msgstr ""
"Tool Diameter. It's value (in current FlatCAM units)\n"
"is the cut width into the material."

#: flatcamTools/ToolNonCopperClear.py:126
msgid ""
"The Tool Type (TT) can be:\n"
"- Circular with 1 ... 4 teeth -> it is informative only. Being circular,\n"
"the cut width in material is exactly the tool diameter.\n"
"- Ball -> informative only and make reference to the Ball type endmill.\n"
"- V-Shape -> it will disable de Z-Cut parameter in the resulting geometry UI "
"form\n"
"and enable two additional UI form fields in the resulting geometry: V-Tip "
"Dia and\n"
"V-Tip Angle. Adjusting those two values will adjust the Z-Cut parameter "
"such\n"
"as the cut width into material will be equal with the value in the Tool "
"Diameter\n"
"column of this table.\n"
"Choosing the 'V-Shape' Tool Type automatically will select the Operation "
"Type\n"
"in the resulting geometry as Isolation."
msgstr ""
"The Tool Type (TT) can be:\n"
"- Circular with 1 ... 4 teeth -> it is informative only. Being circular,\n"
"the cut width in material is exactly the tool diameter.\n"
"- Ball -> informative only and make reference to the Ball type endmill.\n"
"- V-Shape -> it will disable de Z-Cut parameter in the resulting geometry UI "
"form\n"
"and enable two additional UI form fields in the resulting geometry: V-Tip "
"Dia and\n"
"V-Tip Angle. Adjusting those two values will adjust the Z-Cut parameter "
"such\n"
"as the cut width into material will be equal with the value in the Tool "
"Diameter\n"
"column of this table.\n"
"Choosing the 'V-Shape' Tool Type automatically will select the Operation "
"Type\n"
"in the resulting geometry as Isolation."

#: flatcamTools/ToolNonCopperClear.py:139
msgid ""
"The 'Operation' can be:\n"
"- Isolation -> will ensure that the non-copper clearing is always complete.\n"
"If it's not successful then the non-copper clearing will fail, too.\n"
"- Clear -> the regular non-copper clearing."
msgstr ""
"The 'Operation' can be:\n"
"- Isolation -> will ensure that the non-copper clearing is always complete.\n"
"If it's not successful then the non-copper clearing will fail, too.\n"
"- Clear -> the regular non-copper clearing."

#: flatcamTools/ToolNonCopperClear.py:192
msgid "Tool Selection"
msgstr "Tool Selection"

#: flatcamTools/ToolNonCopperClear.py:215
msgid "Diameter for the new tool to add in the Tool Table"
msgstr "Diameter for the new tool to add in the Tool Table"

#: flatcamTools/ToolNonCopperClear.py:260 flatcamTools/ToolPaint.py:186
#: flatcamTools/ToolSolderPaste.py:123
msgid ""
"Delete a selection of tools in the Tool Table\n"
"by first selecting a row(s) in the Tool Table."
msgstr ""
"Delete a selection of tools in the Tool Table\n"
"by first selecting a row(s) in the Tool Table."

#: flatcamTools/ToolNonCopperClear.py:414 flatcamTools/ToolPaint.py:299
msgid "Area Selection"
msgstr "Area Selection"

#: flatcamTools/ToolNonCopperClear.py:415 flatcamTools/ToolPaint.py:301
msgid "Reference Object"
msgstr "Reference Object"

#: flatcamTools/ToolNonCopperClear.py:417
msgid "Reference:"
msgstr "Reference:"

#: flatcamTools/ToolNonCopperClear.py:432 flatcamTools/ToolPaint.py:316
msgid "Ref. Type"
msgstr "Ref. Type"

#: flatcamTools/ToolNonCopperClear.py:434
msgid ""
"The type of FlatCAM object to be used as non copper clearing reference.\n"
"It can be Gerber, Excellon or Geometry."
msgstr ""
"The type of FlatCAM object to be used as non copper clearing reference.\n"
"It can be Gerber, Excellon or Geometry."

#: flatcamTools/ToolNonCopperClear.py:443 flatcamTools/ToolPaint.py:327
msgid "Ref. Object"
msgstr "Ref. Object"

#: flatcamTools/ToolNonCopperClear.py:445 flatcamTools/ToolPaint.py:329
msgid "The FlatCAM object to be used as non copper clearing reference."
msgstr "The FlatCAM object to be used as non copper clearing reference."

#: flatcamTools/ToolNonCopperClear.py:458
msgid "Generate Geometry"
msgstr "Generate Geometry"

#: flatcamTools/ToolNonCopperClear.py:540 flatcamTools/ToolPaint.py:452
#: flatcamTools/ToolSolderPaste.py:464
#| msgid "New Tool ..."
msgid "New Tool"
msgstr "New Tool"

#: flatcamTools/ToolNonCopperClear.py:972 flatcamTools/ToolPaint.py:733
#: flatcamTools/ToolSolderPaste.py:795
msgid "Please enter a tool diameter to add, in Float format."
msgstr "Please enter a tool diameter to add, in Float format."

#: flatcamTools/ToolNonCopperClear.py:1004 flatcamTools/ToolPaint.py:758
msgid "Adding tool cancelled. Tool already in Tool Table."
msgstr "Adding tool cancelled. Tool already in Tool Table."

#: flatcamTools/ToolNonCopperClear.py:1009 flatcamTools/ToolPaint.py:764
msgid "New tool added to Tool Table."
msgstr "New tool added to Tool Table."

#: flatcamTools/ToolNonCopperClear.py:1053 flatcamTools/ToolPaint.py:810
msgid "Tool from Tool Table was edited."
msgstr "Tool from Tool Table was edited."

#: flatcamTools/ToolNonCopperClear.py:1064 flatcamTools/ToolPaint.py:822
#: flatcamTools/ToolSolderPaste.py:886
msgid "Edit cancelled. New diameter value is already in the Tool Table."
msgstr "Edit cancelled. New diameter value is already in the Tool Table."

#: flatcamTools/ToolNonCopperClear.py:1104 flatcamTools/ToolPaint.py:920
msgid "Delete failed. Select a tool to delete."
msgstr "Delete failed. Select a tool to delete."

#: flatcamTools/ToolNonCopperClear.py:1109 flatcamTools/ToolPaint.py:926
msgid "Tool(s) deleted from Tool Table."
msgstr "Tool(s) deleted from Tool Table."

#: flatcamTools/ToolNonCopperClear.py:1131
msgid "Overlap value must be between 0 (inclusive) and 1 (exclusive), "
msgstr "Overlap value must be between 0 (inclusive) and 1 (exclusive), "

#: flatcamTools/ToolNonCopperClear.py:1167
msgid "Wrong Tool Dia value format entered, use a number."
msgstr "Wrong Tool Dia value format entered, use a number."

#: flatcamTools/ToolNonCopperClear.py:1176 flatcamTools/ToolPaint.py:1009
msgid "No selected tools in Tool Table."
msgstr "No selected tools in Tool Table."

#: flatcamTools/ToolNonCopperClear.py:1201
msgid "Click the start point of the area."
msgstr "Click the start point of the area."

#: flatcamTools/ToolNonCopperClear.py:1251 flatcamTools/ToolPaint.py:1119
msgid "Click the end point of the paint area."
msgstr "Click the end point of the paint area."

#: flatcamTools/ToolNonCopperClear.py:1257 flatcamTools/ToolPaint.py:1125
msgid "Zone added. Click to start adding next zone or right click to finish."
msgstr "Zone added. Click to start adding next zone or right click to finish."

#: flatcamTools/ToolNonCopperClear.py:1397
msgid "Non-Copper clearing ..."
msgstr "Non-Copper clearing ..."

#: flatcamTools/ToolNonCopperClear.py:1406
msgid "NCC Tool started. Reading parameters."
msgstr "NCC Tool started. Reading parameters."

#: flatcamTools/ToolNonCopperClear.py:1476
msgid "NCC Tool. Preparing non-copper polygons."
msgstr "NCC Tool. Preparing non-copper polygons."

#: flatcamTools/ToolNonCopperClear.py:1504 flatcamTools/ToolPaint.py:2519
msgid "No object available."
msgstr "No object available."

#: flatcamTools/ToolNonCopperClear.py:1546
msgid "The reference object type is not supported."
msgstr "The reference object type is not supported."

#: flatcamTools/ToolNonCopperClear.py:1568
msgid ""
"NCC Tool. Finished non-copper polygons. Normal copper clearing task started."
msgstr ""
"NCC Tool. Finished non-copper polygons. Normal copper clearing task started."

#: flatcamTools/ToolNonCopperClear.py:1600
msgid "NCC Tool. Calculate 'empty' area."
msgstr "NCC Tool. Calculate 'empty' area."

#: flatcamTools/ToolNonCopperClear.py:1615
#: flatcamTools/ToolNonCopperClear.py:1710
#: flatcamTools/ToolNonCopperClear.py:1722
#: flatcamTools/ToolNonCopperClear.py:1950
#: flatcamTools/ToolNonCopperClear.py:2043
#: flatcamTools/ToolNonCopperClear.py:2055
msgid "Buffering finished"
msgstr "Buffering finished"

#: flatcamTools/ToolNonCopperClear.py:1729
#: flatcamTools/ToolNonCopperClear.py:2061
msgid "The selected object is not suitable for copper clearing."
msgstr "The selected object is not suitable for copper clearing."

#: flatcamTools/ToolNonCopperClear.py:1734
#: flatcamTools/ToolNonCopperClear.py:2066
msgid "Could not get the extent of the area to be non copper cleared."
msgstr "Could not get the extent of the area to be non copper cleared."

#: flatcamTools/ToolNonCopperClear.py:1741
msgid "NCC Tool. Finished calculation of 'empty' area."
msgstr "NCC Tool. Finished calculation of 'empty' area."

#: flatcamTools/ToolNonCopperClear.py:1751
#: flatcamTools/ToolNonCopperClear.py:2091
msgid "NCC Tool clearing with tool diameter = "
msgstr "NCC Tool clearing with tool diameter = "

#: flatcamTools/ToolNonCopperClear.py:1754
#: flatcamTools/ToolNonCopperClear.py:2094
msgid "started."
msgstr "started."

#: flatcamTools/ToolNonCopperClear.py:1893 flatcamTools/ToolPaint.py:1478
#: flatcamTools/ToolPaint.py:1813 flatcamTools/ToolPaint.py:1963
#: flatcamTools/ToolPaint.py:2284 flatcamTools/ToolPaint.py:2438
msgid ""
"There is no Painting Geometry in the file.\n"
"Usually it means that the tool diameter is too big for the painted "
"geometry.\n"
"Change the painting parameters and try again."
msgstr ""
"There is no Painting Geometry in the file.\n"
"Usually it means that the tool diameter is too big for the painted "
"geometry.\n"
"Change the painting parameters and try again."

#: flatcamTools/ToolNonCopperClear.py:1903
msgid "NCC Tool clear all done."
msgstr "NCC Tool clear all done."

#: flatcamTools/ToolNonCopperClear.py:1905
msgid "NCC Tool clear all done but the copper features isolation is broken for"
msgstr ""
"NCC Tool clear all done but the copper features isolation is broken for"

#: flatcamTools/ToolNonCopperClear.py:1908
#: flatcamTools/ToolNonCopperClear.py:2258
msgid "tools"
msgstr "tools"

#: flatcamTools/ToolNonCopperClear.py:2254
msgid "NCC Tool Rest Machining clear all done."
msgstr "NCC Tool Rest Machining clear all done."

#: flatcamTools/ToolNonCopperClear.py:2257
msgid ""
"NCC Tool Rest Machining clear all done but the copper features isolation is "
"broken for"
msgstr ""
"NCC Tool Rest Machining clear all done but the copper features isolation is "
"broken for"

#: flatcamTools/ToolNonCopperClear.py:2684
msgid ""
"Try to use the Buffering Type = Full in Preferences -> Gerber General. "
"Reload the Gerber file after this change."
msgstr ""
"Try to use the Buffering Type = Full in Preferences -> Gerber General. "
"Reload the Gerber file after this change."

#: flatcamTools/ToolOptimal.py:71
msgid "Precision"
msgstr "Precision"

#: flatcamTools/ToolOptimal.py:72
msgid "Number of decimals kept for found distances."
msgstr "Number of decimals kept for found distances."

#: flatcamTools/ToolOptimal.py:80
#| msgid "Buffer distance"
msgid "Minimum distance"
msgstr "Minimum distance"

#: flatcamTools/ToolOptimal.py:81
msgid "Display minimum distance between copper features."
msgstr "Display minimum distance between copper features."

#: flatcamTools/ToolOptimal.py:85
msgid "Determined"
msgstr "Determined"

#: flatcamTools/ToolOptimal.py:99
msgid "Occurring"
msgstr "Occurring"

#: flatcamTools/ToolOptimal.py:100
msgid "How many times this minimum is found."
msgstr "How many times this minimum is found."

#: flatcamTools/ToolOptimal.py:106
#| msgid "Jump to Coordinates"
msgid "Minimum points coordinates"
msgstr "Minimum points coordinates"

#: flatcamTools/ToolOptimal.py:107
msgid "Coordinates for points where minimum distance was found."
msgstr "Coordinates for points where minimum distance was found."

#: flatcamTools/ToolOptimal.py:123 flatcamTools/ToolOptimal.py:191
#| msgid "Jump to Location\tJ"
msgid "Jump to selected position"
msgstr "Jump to selected position"

#: flatcamTools/ToolOptimal.py:125 flatcamTools/ToolOptimal.py:193
msgid ""
"Select a position in the Locations text box and then\n"
"click this button."
msgstr ""
"Select a position in the Locations text box and then\n"
"click this button."

#: flatcamTools/ToolOptimal.py:133
#| msgid "Buffer distance"
msgid "Other distances"
msgstr "Other distances"

#: flatcamTools/ToolOptimal.py:134
msgid ""
"Will display other distances in the Gerber file ordered from\n"
"the minimum to the maximum, not including the absolute minimum."
msgstr ""
"Will display other distances in the Gerber file ordered from\n"
"the minimum to the maximum, not including the absolute minimum."

#: flatcamTools/ToolOptimal.py:139
#| msgid "This is the measuring Stop point coordinates."
msgid "Other distances points coordinates"
msgstr "Other distances points coordinates"

#: flatcamTools/ToolOptimal.py:140 flatcamTools/ToolOptimal.py:154
#: flatcamTools/ToolOptimal.py:174
msgid ""
"Other distances and the coordinates for points\n"
"where the distance was found."
msgstr ""
"Other distances and the coordinates for points\n"
"where the distance was found."

#: flatcamTools/ToolOptimal.py:153
#| msgid "Gerber Line"
msgid "Gerber distances"
msgstr "Gerber distances"

#: flatcamTools/ToolOptimal.py:173
#| msgid "Jump to Coordinates"
msgid "Points coordinates"
msgstr "Points coordinates"

#: flatcamTools/ToolOptimal.py:201
msgid "Find Minimum"
msgstr "Find Minimum"

#: flatcamTools/ToolOptimal.py:203
msgid ""
"Calculate the minimum distance between copper features,\n"
"this will allow the determination of the right tool to\n"
"use for isolation or copper clearing."
msgstr ""
"Calculate the minimum distance between copper features,\n"
"this will allow the determination of the right tool to\n"
"use for isolation or copper clearing."

#: flatcamTools/ToolOptimal.py:307
#| msgid "Only Geometry objects can be used."
msgid "Only Gerber objects can be evaluated."
msgstr "Only Gerber objects can be evaluated."

#: flatcamTools/ToolOptimal.py:310 flatcamTools/ToolPanelize.py:748
#: flatcamTools/ToolRulesCheck.py:955
msgid "Working..."
msgstr "Working..."

#: flatcamTools/ToolOptimal.py:313
msgid ""
"Optimal Tool. Started to search for the minimum distance between copper "
"features."
msgstr ""
"Optimal Tool. Started to search for the minimum distance between copper "
"features."

#: flatcamTools/ToolOptimal.py:323
#| msgid "Parsing geometry for aperture"
msgid "Optimal Tool. Parsing geometry for aperture"
msgstr "Optimal Tool. Parsing geometry for aperture"

#: flatcamTools/ToolOptimal.py:334
msgid "Optimal Tool. Creating a buffer for the object geometry."
msgstr "Optimal Tool. Creating a buffer for the object geometry."

#: flatcamTools/ToolOptimal.py:344
msgid ""
"The Gerber object has one Polygon as geometry.\n"
"There are no distances between geometry elements to be found."
msgstr ""
"The Gerber object has one Polygon as geometry.\n"
"There are no distances between geometry elements to be found."

#: flatcamTools/ToolOptimal.py:349
msgid ""
"Optimal Tool. Finding the distances between each two elements. Iterations"
msgstr ""
"Optimal Tool. Finding the distances between each two elements. Iterations"

#: flatcamTools/ToolOptimal.py:384
msgid "Optimal Tool. Finding the minimum distance."
msgstr "Optimal Tool. Finding the minimum distance."

#: flatcamTools/ToolOptimal.py:400
#| msgid "Panel created successfully."
msgid "Optimal Tool. Finished successfully."
msgstr "Optimal Tool. Finished successfully."

#: flatcamTools/ToolPDF.py:152 flatcamTools/ToolPDF.py:156
msgid "Open PDF"
msgstr "Open PDF"

#: flatcamTools/ToolPDF.py:159
msgid "Open PDF cancelled"
msgstr "Open PDF cancelled"

#: flatcamTools/ToolPDF.py:190
msgid "Parsing PDF file ..."
msgstr "Parsing PDF file ..."

#: flatcamTools/ToolPDF.py:273 flatcamTools/ToolPDF.py:348
#, python-format
msgid "Rendering PDF layer #%d ..."
msgstr "Rendering PDF layer #%d ..."

#: flatcamTools/ToolPDF.py:278 flatcamTools/ToolPDF.py:353
msgid "Open PDF file failed."
msgstr "Open PDF file failed."

#: flatcamTools/ToolPDF.py:284 flatcamTools/ToolPDF.py:358
msgid "Rendered"
msgstr "Rendered"

#: flatcamTools/ToolPaint.py:71
msgid ""
"Specify the type of object to be painted.\n"
"It can be of type: Gerber or Geometry.\n"
"What is selected here will dictate the kind\n"
"of objects that will populate the 'Object' combobox."
msgstr ""
"Specify the type of object to be painted.\n"
"It can be of type: Gerber or Geometry.\n"
"What is selected here will dictate the kind\n"
"of objects that will populate the 'Object' combobox."

#: flatcamTools/ToolPaint.py:88
msgid "Object to be painted."
msgstr "Object to be painted."

#: flatcamTools/ToolPaint.py:98
msgid ""
"Tools pool from which the algorithm\n"
"will pick the ones used for painting."
msgstr ""
"Tools pool from which the algorithm\n"
"will pick the ones used for painting."

#: flatcamTools/ToolPaint.py:113
msgid ""
"This is the Tool Number.\n"
"Painting will start with the tool with the biggest diameter,\n"
"continuing until there are no more tools.\n"
"Only tools that create painting geometry will still be present\n"
"in the resulting geometry. This is because with some tools\n"
"this function will not be able to create painting geometry."
msgstr ""
"This is the Tool Number.\n"
"Painting will start with the tool with the biggest diameter,\n"
"continuing until there are no more tools.\n"
"Only tools that create painting geometry will still be present\n"
"in the resulting geometry. This is because with some tools\n"
"this function will not be able to create painting geometry."

#: flatcamTools/ToolPaint.py:125
msgid ""
"The Tool Type (TT) can be:<BR>- <B>Circular</B> with 1 ... 4 teeth -> it is "
"informative only. Being circular, <BR>the cut width in material is exactly "
"the tool diameter.<BR>- <B>Ball</B> -> informative only and make reference "
"to the Ball type endmill.<BR>- <B>V-Shape</B> -> it will disable de Z-Cut "
"parameter in the resulting geometry UI form and enable two additional UI "
"form fields in the resulting geometry: V-Tip Dia and V-Tip Angle. Adjusting "
"those two values will adjust the Z-Cut parameter such as the cut width into "
"material will be equal with the value in the Tool Diameter column of this "
"table.<BR>Choosing the <B>V-Shape</B> Tool Type automatically will select "
"the Operation Type in the resulting geometry as Isolation."
msgstr ""
"The Tool Type (TT) can be:<BR>- <B>Circular</B> with 1 ... 4 teeth -> it is "
"informative only. Being circular, <BR>the cut width in material is exactly "
"the tool diameter.<BR>- <B>Ball</B> -> informative only and make reference "
"to the Ball type endmill.<BR>- <B>V-Shape</B> -> it will disable de Z-Cut "
"parameter in the resulting geometry UI form and enable two additional UI "
"form fields in the resulting geometry: V-Tip Dia and V-Tip Angle. Adjusting "
"those two values will adjust the Z-Cut parameter such as the cut width into "
"material will be equal with the value in the Tool Diameter column of this "
"table.<BR>Choosing the <B>V-Shape</B> Tool Type automatically will select "
"the Operation Type in the resulting geometry as Isolation."

#: flatcamTools/ToolPaint.py:162
msgid "Diameter for the new tool."
msgstr "Diameter for the new tool."

#: flatcamTools/ToolPaint.py:239
msgid ""
"Algorithm for painting:\n"
"- Standard: Fixed step inwards.\n"
"- Seed-based: Outwards from seed.\n"
"- Line-based: Parallel lines."
msgstr ""
"Algorithm for painting:\n"
"- Standard: Fixed step inwards.\n"
"- Seed-based: Outwards from seed.\n"
"- Line-based: Parallel lines."

#: flatcamTools/ToolPaint.py:273
msgid ""
"If checked, use 'rest machining'.\n"
"Basically it will clear copper outside PCB features,\n"
"using the biggest tool and continue with the next tools,\n"
"from bigger to smaller, to clear areas of copper that\n"
"could not be cleared by previous tool, until there is\n"
"no more copper to clear or there are no more tools.\n"
"\n"
"If not checked, use the standard algorithm."
msgstr ""
"If checked, use 'rest machining'.\n"
"Basically it will clear copper outside PCB features,\n"
"using the biggest tool and continue with the next tools,\n"
"from bigger to smaller, to clear areas of copper that\n"
"could not be cleared by previous tool, until there is\n"
"no more copper to clear or there are no more tools.\n"
"\n"
"If not checked, use the standard algorithm."

#: flatcamTools/ToolPaint.py:298
msgid "Single Polygon"
msgstr "Single Polygon"

#: flatcamTools/ToolPaint.py:300
msgid "All Polygons"
msgstr "All Polygons"

#: flatcamTools/ToolPaint.py:318
msgid ""
"The type of FlatCAM object to be used as paint reference.\n"
"It can be Gerber, Excellon or Geometry."
msgstr ""
"The type of FlatCAM object to be used as paint reference.\n"
"It can be Gerber, Excellon or Geometry."

#: flatcamTools/ToolPaint.py:343
msgid "Create Paint Geometry"
msgstr "Create Paint Geometry"

#: flatcamTools/ToolPaint.py:345
msgid ""
"- 'Area Selection' - left mouse click to start selection of the area to be "
"painted.\n"
"Keeping a modifier key pressed (CTRL or SHIFT) will allow to add multiple "
"areas.\n"
"- 'All Polygons' - the Paint will start after click.\n"
"- 'Reference Object' -  will do non copper clearing within the area\n"
"specified by another object."
msgstr ""
"- 'Area Selection' - left mouse click to start selection of the area to be "
"painted.\n"
"Keeping a modifier key pressed (CTRL or SHIFT) will allow to add multiple "
"areas.\n"
"- 'All Polygons' - the Paint will start after click.\n"
"- 'Reference Object' -  will do non copper clearing within the area\n"
"specified by another object."

#: flatcamTools/ToolPaint.py:940
msgid "Paint Tool. Reading parameters."
msgstr "Paint Tool. Reading parameters."

#: flatcamTools/ToolPaint.py:955
msgid "Overlap value must be between 0 (inclusive) and 1 (exclusive)"
msgstr "Overlap value must be between 0 (inclusive) and 1 (exclusive)"

#: flatcamTools/ToolPaint.py:959 flatcamTools/ToolPaint.py:1022
msgid "Click inside the desired polygon."
msgstr "Click inside the desired polygon."

#: flatcamTools/ToolPaint.py:973
#, python-format
msgid "Could not retrieve object: %s"
msgstr "Could not retrieve object: %s"

#: flatcamTools/ToolPaint.py:987
msgid "Can't do Paint on MultiGeo geometries"
msgstr "Can't do Paint on MultiGeo geometries"

#: flatcamTools/ToolPaint.py:1031 flatcamTools/ToolPaint.py:1304
msgid "Painting polygon..."
msgstr "Painting polygon..."

#: flatcamTools/ToolPaint.py:1062
msgid "Click the start point of the paint area."
msgstr "Click the start point of the paint area."

#: flatcamTools/ToolPaint.py:1260 flatcamTools/ToolPaint.py:1264
#: flatcamTools/ToolPaint.py:1267 flatcamTools/ToolPaint.py:1306
#: flatcamTools/ToolPaint.py:1833 flatcamTools/ToolPaint.py:1837
#: flatcamTools/ToolPaint.py:1840 flatcamTools/ToolPaint.py:2122
#: flatcamTools/ToolPaint.py:2127 flatcamTools/ToolPaint.py:2130
#: flatcamTools/ToolPaint.py:2304 flatcamTools/ToolPaint.py:2311
msgid "Paint Tool."
msgstr "Paint Tool."

#: flatcamTools/ToolPaint.py:1260 flatcamTools/ToolPaint.py:1264
#: flatcamTools/ToolPaint.py:1267
msgid "Normal painting polygon task started."
msgstr "Normal painting polygon task started."

#: flatcamTools/ToolPaint.py:1261 flatcamTools/ToolPaint.py:1659
#: flatcamTools/ToolPaint.py:1834 flatcamTools/ToolPaint.py:2124
#: flatcamTools/ToolPaint.py:2306
msgid "Buffering geometry..."
msgstr "Buffering geometry..."

#: flatcamTools/ToolPaint.py:1301
msgid "No polygon found."
msgstr "No polygon found."

#: flatcamTools/ToolPaint.py:1306
msgid "Painting polygon at location"
msgstr "Painting polygon at location"

#: flatcamTools/ToolPaint.py:1389
msgid "Geometry could not be painted completely"
msgstr "Geometry could not be painted completely"

#: flatcamTools/ToolPaint.py:1434
msgid ""
"Could not do Paint. Try a different combination of parameters. Or a "
"different strategy of paint"
msgstr ""
"Could not do Paint. Try a different combination of parameters. Or a "
"different strategy of paint"

#: flatcamTools/ToolPaint.py:1483
msgid "Paint Single Done."
msgstr "Paint Single Done."

#: flatcamTools/ToolPaint.py:1515 flatcamTools/ToolPaint.py:1991
#: flatcamTools/ToolPaint.py:2466
msgid "Polygon Paint started ..."
msgstr "Polygon Paint started ..."

#: flatcamTools/ToolPaint.py:1576 flatcamTools/ToolPaint.py:2053
msgid "Painting polygons..."
msgstr "Painting polygons..."

#: flatcamTools/ToolPaint.py:1658 flatcamTools/ToolPaint.py:1661
#: flatcamTools/ToolPaint.py:1663
msgid "Paint Tool. Normal painting all task started."
msgstr "Paint Tool. Normal painting all task started."

#: flatcamTools/ToolPaint.py:1697 flatcamTools/ToolPaint.py:1869
#: flatcamTools/ToolPaint.py:2171 flatcamTools/ToolPaint.py:2347
msgid "Painting with tool diameter = "
msgstr "Painting with tool diameter = "

#: flatcamTools/ToolPaint.py:1700 flatcamTools/ToolPaint.py:1872
#: flatcamTools/ToolPaint.py:2174 flatcamTools/ToolPaint.py:2350
msgid "started"
msgstr "started"

#: flatcamTools/ToolPaint.py:1762 flatcamTools/ToolPaint.py:1918
#: flatcamTools/ToolPaint.py:2234 flatcamTools/ToolPaint.py:2394
msgid ""
"Could not do Paint All. Try a different combination of parameters. Or a "
"different Method of paint"
msgstr ""
"Could not do Paint All. Try a different combination of parameters. Or a "
"different Method of paint"

#: flatcamTools/ToolPaint.py:1822
msgid "Paint All Done."
msgstr "Paint All Done."

#: flatcamTools/ToolPaint.py:1833 flatcamTools/ToolPaint.py:1837
#: flatcamTools/ToolPaint.py:1840
msgid "Rest machining painting all task started."
msgstr "Rest machining painting all task started."

#: flatcamTools/ToolPaint.py:1972 flatcamTools/ToolPaint.py:2447
msgid "Paint All with Rest-Machining done."
msgstr "Paint All with Rest-Machining done."

#: flatcamTools/ToolPaint.py:2123 flatcamTools/ToolPaint.py:2127
#: flatcamTools/ToolPaint.py:2130
msgid "Normal painting area task started."
msgstr "Normal painting area task started."

#: flatcamTools/ToolPaint.py:2293
msgid "Paint Area Done."
msgstr "Paint Area Done."

#: flatcamTools/ToolPaint.py:2305 flatcamTools/ToolPaint.py:2311
msgid "Rest machining painting area task started."
msgstr "Rest machining painting area task started."

#: flatcamTools/ToolPaint.py:2308
msgid "Paint Tool. Rest machining painting area task started."
msgstr "Paint Tool. Rest machining painting area task started."

#: flatcamTools/ToolPanelize.py:25
msgid "Panelize PCB"
msgstr "Panelize PCB"

#: flatcamTools/ToolPanelize.py:58
msgid ""
"Specify the type of object to be panelized\n"
"It can be of type: Gerber, Excellon or Geometry.\n"
"The selection here decide the type of objects that will be\n"
"in the Object combobox."
msgstr ""
"Specify the type of object to be panelized\n"
"It can be of type: Gerber, Excellon or Geometry.\n"
"The selection here decide the type of objects that will be\n"
"in the Object combobox."

#: flatcamTools/ToolPanelize.py:73 flatcamTools/ToolRulesCheck.py:196
#: flatcamTools/ToolRulesCheck.py:210
msgid ""
"Object to be panelized. This means that it will\n"
"be duplicated in an array of rows and columns."
msgstr ""
"Object to be panelized. This means that it will\n"
"be duplicated in an array of rows and columns."

#: flatcamTools/ToolPanelize.py:86
msgid "Penelization Reference"
msgstr "Penelization Reference"

#: flatcamTools/ToolPanelize.py:88
msgid ""
"Choose the reference for panelization:\n"
"- Object = the bounding box of a different object\n"
"- Bounding Box = the bounding box of the object to be panelized\n"
"\n"
"The reference is useful when doing panelization for more than one\n"
"object. The spacings (really offsets) will be applied in reference\n"
"to this reference object therefore maintaining the panelized\n"
"objects in sync."
msgstr ""
"Choose the reference for panelization:\n"
"- Object = the bounding box of a different object\n"
"- Bounding Box = the bounding box of the object to be panelized\n"
"\n"
"The reference is useful when doing panelization for more than one\n"
"object. The spacings (really offsets) will be applied in reference\n"
"to this reference object therefore maintaining the panelized\n"
"objects in sync."

#: flatcamTools/ToolPanelize.py:111
msgid "Box Type"
msgstr "Box Type"

#: flatcamTools/ToolPanelize.py:113
msgid ""
"Specify the type of object to be used as an container for\n"
"panelization. It can be: Gerber or Geometry type.\n"
"The selection here decide the type of objects that will be\n"
"in the Box Object combobox."
msgstr ""
"Specify the type of object to be used as an container for\n"
"panelization. It can be: Gerber or Geometry type.\n"
"The selection here decide the type of objects that will be\n"
"in the Box Object combobox."

#: flatcamTools/ToolPanelize.py:128
msgid ""
"The actual object that is used a container for the\n"
" selected object that is to be panelized."
msgstr ""
"The actual object that is used a container for the\n"
" selected object that is to be panelized."

#: flatcamTools/ToolPanelize.py:134
msgid "Panel Data"
msgstr "Panel Data"

#: flatcamTools/ToolPanelize.py:136
msgid ""
"This informations will shape the resulting panel.\n"
"The number of rows and columns will set how many\n"
"duplicates of the original geometry will be generated.\n"
"\n"
"The spacings will set the distance between any two\n"
"elements of the panel array."
msgstr ""
"This informations will shape the resulting panel.\n"
"The number of rows and columns will set how many\n"
"duplicates of the original geometry will be generated.\n"
"\n"
"The spacings will set the distance between any two\n"
"elements of the panel array."

#: flatcamTools/ToolPanelize.py:185
msgid ""
"Choose the type of object for the panel object:\n"
"- Geometry\n"
"- Gerber"
msgstr ""
"Choose the type of object for the panel object:\n"
"- Geometry\n"
"- Gerber"

#: flatcamTools/ToolPanelize.py:193
msgid "Constrain panel within"
msgstr "Constrain panel within"

#: flatcamTools/ToolPanelize.py:227
msgid "Panelize Object"
msgstr "Panelize Object"

#: flatcamTools/ToolPanelize.py:229 flatcamTools/ToolRulesCheck.py:447
msgid ""
"Panelize the specified object around the specified box.\n"
"In other words it creates multiple copies of the source object,\n"
"arranged in a 2D array of rows and columns."
msgstr ""
"Panelize the specified object around the specified box.\n"
"In other words it creates multiple copies of the source object,\n"
"arranged in a 2D array of rows and columns."

#: flatcamTools/ToolPanelize.py:277
msgid "Panel. Tool"
msgstr "Panel. Tool"

#: flatcamTools/ToolPanelize.py:408
msgid "Columns or Rows are zero value. Change them to a positive integer."
msgstr "Columns or Rows are zero value. Change them to a positive integer."

#: flatcamTools/ToolPanelize.py:433
msgid "Generating panel ... "
msgstr "Generating panel ... "

#: flatcamTools/ToolPanelize.py:719
msgid "Generating panel ... Adding the Gerber code."
msgstr "Generating panel ... Adding the Gerber code."

#: flatcamTools/ToolPanelize.py:731
msgid "Generating panel... Spawning copies"
msgstr "Generating panel... Spawning copies"

#: flatcamTools/ToolPanelize.py:741
msgid "Panel done..."
msgstr "Panel done..."

#: flatcamTools/ToolPanelize.py:744
#, python-brace-format
msgid ""
"{text} Too big for the constrain area. Final panel has {col} columns and "
"{row} rows"
msgstr ""
"{text} Too big for the constrain area. Final panel has {col} columns and "
"{row} rows"

#: flatcamTools/ToolPanelize.py:753
msgid "Panel created successfully."
msgstr "Panel created successfully."

#: flatcamTools/ToolPcbWizard.py:32
msgid "PcbWizard Import Tool"
msgstr "PcbWizard Import Tool"

#: flatcamTools/ToolPcbWizard.py:40
msgid "Import 2-file Excellon"
msgstr "Import 2-file Excellon"

#: flatcamTools/ToolPcbWizard.py:51
msgid "Load files"
msgstr "Load files"

#: flatcamTools/ToolPcbWizard.py:57
msgid "Excellon file"
msgstr "Excellon file"

#: flatcamTools/ToolPcbWizard.py:59
msgid ""
"Load the Excellon file.\n"
"Usually it has a .DRL extension"
msgstr ""
"Load the Excellon file.\n"
"Usually it has a .DRL extension"

#: flatcamTools/ToolPcbWizard.py:65
msgid "INF file"
msgstr "INF file"

#: flatcamTools/ToolPcbWizard.py:67
msgid "Load the INF file."
msgstr "Load the INF file."

#: flatcamTools/ToolPcbWizard.py:79
msgid "Tool Number"
msgstr "Tool Number"

#: flatcamTools/ToolPcbWizard.py:81
msgid "Tool diameter in file units."
msgstr "Tool diameter in file units."

#: flatcamTools/ToolPcbWizard.py:87
msgid "Excellon format"
msgstr "Excellon format"

#: flatcamTools/ToolPcbWizard.py:95
msgid "Int. digits"
msgstr "Int. digits"

#: flatcamTools/ToolPcbWizard.py:97
msgid "The number of digits for the integral part of the coordinates."
msgstr "The number of digits for the integral part of the coordinates."

#: flatcamTools/ToolPcbWizard.py:104
msgid "Frac. digits"
msgstr "Frac. digits"

#: flatcamTools/ToolPcbWizard.py:106
msgid "The number of digits for the fractional part of the coordinates."
msgstr "The number of digits for the fractional part of the coordinates."

#: flatcamTools/ToolPcbWizard.py:113
msgid "No Suppression"
msgstr "No Suppression"

#: flatcamTools/ToolPcbWizard.py:114
msgid "Zeros supp."
msgstr "Zeros supp."

#: flatcamTools/ToolPcbWizard.py:116
msgid ""
"The type of zeros suppression used.\n"
"Can be of type:\n"
"- LZ = leading zeros are kept\n"
"- TZ = trailing zeros are kept\n"
"- No Suppression = no zero suppression"
msgstr ""
"The type of zeros suppression used.\n"
"Can be of type:\n"
"- LZ = leading zeros are kept\n"
"- TZ = trailing zeros are kept\n"
"- No Suppression = no zero suppression"

#: flatcamTools/ToolPcbWizard.py:129
msgid ""
"The type of units that the coordinates and tool\n"
"diameters are using. Can be INCH or MM."
msgstr ""
"The type of units that the coordinates and tool\n"
"diameters are using. Can be INCH or MM."

#: flatcamTools/ToolPcbWizard.py:136
msgid "Import Excellon"
msgstr "Import Excellon"

#: flatcamTools/ToolPcbWizard.py:138
msgid ""
"Import in FlatCAM an Excellon file\n"
"that store it's information's in 2 files.\n"
"One usually has .DRL extension while\n"
"the other has .INF extension."
msgstr ""
"Import in FlatCAM an Excellon file\n"
"that store it's information's in 2 files.\n"
"One usually has .DRL extension while\n"
"the other has .INF extension."

#: flatcamTools/ToolPcbWizard.py:197
msgid "PCBWizard Tool"
msgstr "PCBWizard Tool"

#: flatcamTools/ToolPcbWizard.py:291 flatcamTools/ToolPcbWizard.py:295
msgid "Load PcbWizard Excellon file"
msgstr "Load PcbWizard Excellon file"

#: flatcamTools/ToolPcbWizard.py:314 flatcamTools/ToolPcbWizard.py:318
msgid "Load PcbWizard INF file"
msgstr "Load PcbWizard INF file"

#: flatcamTools/ToolPcbWizard.py:366
msgid ""
"The INF file does not contain the tool table.\n"
"Try to open the Excellon file from File -> Open -> Excellon\n"
"and edit the drill diameters manually."
msgstr ""
"The INF file does not contain the tool table.\n"
"Try to open the Excellon file from File -> Open -> Excellon\n"
"and edit the drill diameters manually."

#: flatcamTools/ToolPcbWizard.py:387
msgid "PcbWizard .INF file loaded."
msgstr "PcbWizard .INF file loaded."

#: flatcamTools/ToolPcbWizard.py:392
msgid "Main PcbWizard Excellon file loaded."
msgstr "Main PcbWizard Excellon file loaded."

#: flatcamTools/ToolPcbWizard.py:431
msgid "Cannot parse file"
msgstr "Cannot parse file"

#: flatcamTools/ToolPcbWizard.py:456
msgid "Importing Excellon."
msgstr "Importing Excellon."

#: flatcamTools/ToolPcbWizard.py:463
msgid "Import Excellon file failed."
msgstr "Import Excellon file failed."

#: flatcamTools/ToolPcbWizard.py:471
msgid "Imported"
msgstr "Imported"

#: flatcamTools/ToolPcbWizard.py:475
msgid "Excellon merging is in progress. Please wait..."
msgstr "Excellon merging is in progress. Please wait..."

#: flatcamTools/ToolPcbWizard.py:478
msgid "The imported Excellon file is None."
msgstr "The imported Excellon file is None."

#: flatcamTools/ToolProperties.py:112
msgid "Properties Tool was not displayed. No object selected."
msgstr "Properties Tool was not displayed. No object selected."

#: flatcamTools/ToolProperties.py:120
msgid "Object Properties are displayed."
msgstr "Object Properties are displayed."

#: flatcamTools/ToolProperties.py:121
msgid "Properties Tool"
msgstr "Properties Tool"

#: flatcamTools/ToolProperties.py:130
msgid "TYPE"
msgstr "TYPE"

#: flatcamTools/ToolProperties.py:131
msgid "NAME"
msgstr "NAME"

#: flatcamTools/ToolProperties.py:132
msgid "Dimensions"
msgstr "Dimensions"

#: flatcamTools/ToolProperties.py:146
msgid "Geo Type"
msgstr "Geo Type"

#: flatcamTools/ToolProperties.py:147
msgid "Single-Geo"
msgstr "Single-Geo"

#: flatcamTools/ToolProperties.py:147
msgid "Multi-Geo"
msgstr "Multi-Geo"

#: flatcamTools/ToolProperties.py:155
msgid "Calculating dimensions ... Please wait."
msgstr "Calculating dimensions ... Please wait."

#: flatcamTools/ToolProperties.py:246
msgid "Inch"
msgstr "Inch"

#: flatcamTools/ToolProperties.py:247
msgid "Metric"
msgstr "Metric"

#: flatcamTools/ToolProperties.py:298 flatcamTools/ToolProperties.py:312
#: flatcamTools/ToolProperties.py:315 flatcamTools/ToolProperties.py:318
msgid "Present"
msgstr "Present"

#: flatcamTools/ToolProperties.py:352
msgid "Width"
msgstr "Width"

#: flatcamTools/ToolProperties.py:357 flatcamTools/ToolProperties.py:361
msgid "Box Area"
msgstr "Box Area"

#: flatcamTools/ToolProperties.py:358 flatcamTools/ToolProperties.py:362
msgid "Convex_Hull Area"
msgstr "Convex_Hull Area"

#: flatcamTools/ToolRulesCheck.py:29
msgid "Check Rules"
msgstr "Check Rules"

#: flatcamTools/ToolRulesCheck.py:52
#| msgid "Open Gerber File"
msgid "Gerber Files"
msgstr "Gerber Files"

#: flatcamTools/ToolRulesCheck.py:54
msgid "Gerber files for which to check rules."
msgstr "Gerber files for which to check rules."

#: flatcamTools/ToolRulesCheck.py:65
msgid "Top"
msgstr "Top"

#: flatcamTools/ToolRulesCheck.py:67
msgid "The Gerber Copper Top file for which rules are checked."
msgstr "The Gerber Copper Top file for which rules are checked."

#: flatcamTools/ToolRulesCheck.py:78
msgid "Bottom"
msgstr "Bottom"

#: flatcamTools/ToolRulesCheck.py:80
msgid "The Gerber Copper Bottom file for which rules are checked."
msgstr "The Gerber Copper Bottom file for which rules are checked."

#: flatcamTools/ToolRulesCheck.py:91
msgid "SM Top"
msgstr "SM Top"

#: flatcamTools/ToolRulesCheck.py:93 flatcamTools/ToolRulesCheck.py:106
msgid "The Gerber Solder Mask Top file for which rules are checked."
msgstr "The Gerber Solder Mask Top file for which rules are checked."

#: flatcamTools/ToolRulesCheck.py:104
msgid "SM Bottom"
msgstr "SM Bottom"

#: flatcamTools/ToolRulesCheck.py:117
msgid "Silk Top"
msgstr "Silk Top"

#: flatcamTools/ToolRulesCheck.py:119
msgid "The Gerber Silkscreen Top file for which rules are checked."
msgstr "The Gerber Silkscreen Top file for which rules are checked."

#: flatcamTools/ToolRulesCheck.py:130
msgid "Silk Bottom"
msgstr "Silk Bottom"

#: flatcamTools/ToolRulesCheck.py:132
msgid "The Gerber Silkscreen Bottom file for which rules are checked."
msgstr "The Gerber Silkscreen Bottom file for which rules are checked."

#: flatcamTools/ToolRulesCheck.py:143
#| msgid "lines"
msgid "Outline"
msgstr "Outline"

#: flatcamTools/ToolRulesCheck.py:145
msgid "The Gerber Outline (Cutout) file for which rules are checked."
msgstr "The Gerber Outline (Cutout) file for which rules are checked."

#: flatcamTools/ToolRulesCheck.py:183
#| msgid "Excellon file"
msgid "Excellon Files"
msgstr "Excellon Files"

#: flatcamTools/ToolRulesCheck.py:185
msgid "Excellon files for which to check rules."
msgstr "Excellon files for which to check rules."

#: flatcamTools/ToolRulesCheck.py:194
#| msgid "Excellon"
msgid "Excellon 1"
msgstr "Excellon 1"

#: flatcamTools/ToolRulesCheck.py:208
#| msgid "Excellon"
msgid "Excellon 2"
msgstr "Excellon 2"

#: flatcamTools/ToolRulesCheck.py:233
msgid "All Rules"
msgstr "All Rules"

#: flatcamTools/ToolRulesCheck.py:235
msgid "This check/uncheck all the rules below."
msgstr "This check/uncheck all the rules below."

#: flatcamTools/ToolRulesCheck.py:251 flatcamTools/ToolRulesCheck.py:798
#| msgid "Aperture Size"
msgid "Trace Size"
msgstr "Trace Size"

#: flatcamTools/ToolRulesCheck.py:253
#| msgid "This sets the font size for canvas axis."
msgid "This checks if the minimum size for traces is met."
msgstr "This checks if the minimum size for traces is met."

#: flatcamTools/ToolRulesCheck.py:259 flatcamTools/ToolRulesCheck.py:277
#: flatcamTools/ToolRulesCheck.py:296 flatcamTools/ToolRulesCheck.py:315
#: flatcamTools/ToolRulesCheck.py:334 flatcamTools/ToolRulesCheck.py:353
#: flatcamTools/ToolRulesCheck.py:372 flatcamTools/ToolRulesCheck.py:391
#: flatcamTools/ToolRulesCheck.py:412 flatcamTools/ToolRulesCheck.py:431
#| msgid "Mask value"
msgid "Min value"
msgstr "Min value"

#: flatcamTools/ToolRulesCheck.py:261 flatcamTools/ToolRulesCheck.py:279
#: flatcamTools/ToolRulesCheck.py:298 flatcamTools/ToolRulesCheck.py:317
#: flatcamTools/ToolRulesCheck.py:336 flatcamTools/ToolRulesCheck.py:355
#: flatcamTools/ToolRulesCheck.py:374 flatcamTools/ToolRulesCheck.py:414
#: flatcamTools/ToolRulesCheck.py:433
msgid "Minimum acceptable clearance value."
msgstr "Minimum acceptable clearance value."

#: flatcamTools/ToolRulesCheck.py:268 flatcamTools/ToolRulesCheck.py:986
#: flatcamTools/ToolRulesCheck.py:1013
msgid "Copper to Copper clearance"
msgstr "Copper to Copper clearance"

#: flatcamTools/ToolRulesCheck.py:270
msgid ""
"This checks if the minimum clearance between copper\n"
"features is met."
msgstr ""
"This checks if the minimum clearance between copper\n"
"features is met."

#: flatcamTools/ToolRulesCheck.py:287 flatcamTools/ToolRulesCheck.py:1043
#: flatcamTools/ToolRulesCheck.py:1049 flatcamTools/ToolRulesCheck.py:1062
#: flatcamTools/ToolRulesCheck.py:1069
msgid "Copper to Outline clearance"
msgstr "Copper to Outline clearance"

#: flatcamTools/ToolRulesCheck.py:289
msgid ""
"This checks if the minimum clearance between copper\n"
"features and the outline is met."
msgstr ""
"This checks if the minimum clearance between copper\n"
"features and the outline is met."

#: flatcamTools/ToolRulesCheck.py:306
msgid "Silk to Silk Clearance"
msgstr "Silk to Silk Clearance"

#: flatcamTools/ToolRulesCheck.py:308
msgid ""
"This checks if the minimum clearance between silkscreen\n"
"features and silkscreen features is met."
msgstr ""
"This checks if the minimum clearance between silkscreen\n"
"features and silkscreen features is met."

#: flatcamTools/ToolRulesCheck.py:325 flatcamTools/ToolRulesCheck.py:1152
#: flatcamTools/ToolRulesCheck.py:1158 flatcamTools/ToolRulesCheck.py:1176
msgid "Silk to Solder Mask Clearance"
msgstr "Silk to Solder Mask Clearance"

#: flatcamTools/ToolRulesCheck.py:327
msgid ""
"This checks if the minimum clearance between silkscreen\n"
"features and soldermask features is met."
msgstr ""
"This checks if the minimum clearance between silkscreen\n"
"features and soldermask features is met."

#: flatcamTools/ToolRulesCheck.py:344 flatcamTools/ToolRulesCheck.py:1206
#: flatcamTools/ToolRulesCheck.py:1212 flatcamTools/ToolRulesCheck.py:1226
#: flatcamTools/ToolRulesCheck.py:1233
msgid "Silk to Outline Clearance"
msgstr "Silk to Outline Clearance"

#: flatcamTools/ToolRulesCheck.py:346
msgid ""
"This checks if the minimum clearance between silk\n"
"features and the outline is met."
msgstr ""
"This checks if the minimum clearance between silk\n"
"features and the outline is met."

#: flatcamTools/ToolRulesCheck.py:363 flatcamTools/ToolRulesCheck.py:1244
#: flatcamTools/ToolRulesCheck.py:1271
msgid "Minimum Solder Mask Sliver"
msgstr "Minimum Solder Mask Sliver"

#: flatcamTools/ToolRulesCheck.py:365
msgid ""
"This checks if the minimum clearance between soldermask\n"
"features and soldermask features is met."
msgstr ""
"This checks if the minimum clearance between soldermask\n"
"features and soldermask features is met."

#: flatcamTools/ToolRulesCheck.py:382 flatcamTools/ToolRulesCheck.py:1309
#: flatcamTools/ToolRulesCheck.py:1315 flatcamTools/ToolRulesCheck.py:1331
#: flatcamTools/ToolRulesCheck.py:1338
msgid "Minimum Annular Ring"
msgstr "Minimum Annular Ring"

#: flatcamTools/ToolRulesCheck.py:384
msgid ""
"This checks if the minimum copper ring left by drilling\n"
"a hole into a pad is met."
msgstr ""
"This checks if the minimum copper ring left by drilling\n"
"a hole into a pad is met."

#: flatcamTools/ToolRulesCheck.py:393
msgid "Minimum acceptable ring value."
msgstr "Minimum acceptable ring value."

#: flatcamTools/ToolRulesCheck.py:403 flatcamTools/ToolRulesCheck.py:744
#| msgid "Geo Tolerance"
msgid "Hole to Hole Clearance"
msgstr "Hole to Hole Clearance"

#: flatcamTools/ToolRulesCheck.py:405
msgid ""
"This checks if the minimum clearance between a drill hole\n"
"and another drill hole is met."
msgstr ""
"This checks if the minimum clearance between a drill hole\n"
"and another drill hole is met."

#: flatcamTools/ToolRulesCheck.py:422 flatcamTools/ToolRulesCheck.py:719
#| msgid "Size"
msgid "Hole Size"
msgstr "Hole Size"

#: flatcamTools/ToolRulesCheck.py:424
msgid ""
"This checks if the drill holes\n"
"sizes are above the threshold."
msgstr ""
"This checks if the drill holes\n"
"sizes are above the threshold."

#: flatcamTools/ToolRulesCheck.py:445
msgid "Run Rules Check"
msgstr "Run Rules Check"

#: flatcamTools/ToolRulesCheck.py:987 flatcamTools/ToolRulesCheck.py:1044
#: flatcamTools/ToolRulesCheck.py:1081 flatcamTools/ToolRulesCheck.py:1153
#: flatcamTools/ToolRulesCheck.py:1207 flatcamTools/ToolRulesCheck.py:1245
#: flatcamTools/ToolRulesCheck.py:1310
msgid "Value is not valid."
msgstr "Value is not valid."

#: flatcamTools/ToolRulesCheck.py:999
msgid "TOP: Copper to Copper clearance"
msgstr "TOP: Copper to Copper clearance"

#: flatcamTools/ToolRulesCheck.py:1009
msgid "BOTTOM: Copper to Copper clearance"
msgstr "BOTTOM: Copper to Copper clearance"

#: flatcamTools/ToolRulesCheck.py:1014 flatcamTools/ToolRulesCheck.py:1108
#: flatcamTools/ToolRulesCheck.py:1272
msgid ""
"At least one Gerber object has to be selected for this rule but none is "
"selected."
msgstr ""
"At least one Gerber object has to be selected for this rule but none is "
"selected."

#: flatcamTools/ToolRulesCheck.py:1050
msgid ""
"One of the copper Gerber objects or the Outline Gerber object is not valid."
msgstr ""
"One of the copper Gerber objects or the Outline Gerber object is not valid."

#: flatcamTools/ToolRulesCheck.py:1063 flatcamTools/ToolRulesCheck.py:1227
msgid ""
"Outline Gerber object presence is mandatory for this rule but it is not "
"selected."
msgstr ""
"Outline Gerber object presence is mandatory for this rule but it is not "
"selected."

#: flatcamTools/ToolRulesCheck.py:1080 flatcamTools/ToolRulesCheck.py:1107
msgid "Silk to Silk clearance"
msgstr "Silk to Silk clearance"

#: flatcamTools/ToolRulesCheck.py:1093
msgid "TOP: Silk to Silk clearance"
msgstr "TOP: Silk to Silk clearance"

#: flatcamTools/ToolRulesCheck.py:1103
msgid "BOTTOM: Silk to Silk clearance"
msgstr "BOTTOM: Silk to Silk clearance"

#: flatcamTools/ToolRulesCheck.py:1159
msgid "One or more of the Gerber objects is not valid."
msgstr "One or more of the Gerber objects is not valid."

#: flatcamTools/ToolRulesCheck.py:1167
msgid "TOP: Silk to Solder Mask Clearance"
msgstr "TOP: Silk to Solder Mask Clearance"

#: flatcamTools/ToolRulesCheck.py:1173
msgid "BOTTOM: Silk to Solder Mask Clearance"
msgstr "BOTTOM: Silk to Solder Mask Clearance"

#: flatcamTools/ToolRulesCheck.py:1177
msgid ""
"Both Silk and Solder Mask Gerber objects has to be either both Top or both "
"Bottom."
msgstr ""
"Both Silk and Solder Mask Gerber objects has to be either both Top or both "
"Bottom."

#: flatcamTools/ToolRulesCheck.py:1213
msgid ""
"One of the Silk Gerber objects or the Outline Gerber object is not valid."
msgstr ""
"One of the Silk Gerber objects or the Outline Gerber object is not valid."

#: flatcamTools/ToolRulesCheck.py:1257
msgid "TOP: Minimum Solder Mask Sliver"
msgstr "TOP: Minimum Solder Mask Sliver"

#: flatcamTools/ToolRulesCheck.py:1267
msgid "BOTTOM: Minimum Solder Mask Sliver"
msgstr "BOTTOM: Minimum Solder Mask Sliver"

#: flatcamTools/ToolRulesCheck.py:1316
#| msgid "Select a Geometry, Gerber or Excellon Object to edit."
msgid "One of the Copper Gerber objects or the Excellon objects is not valid."
msgstr "One of the Copper Gerber objects or the Excellon objects is not valid."

#: flatcamTools/ToolRulesCheck.py:1332
msgid ""
"Excellon object presence is mandatory for this rule but none is selected."
msgstr ""
"Excellon object presence is mandatory for this rule but none is selected."

#: flatcamTools/ToolRulesCheck.py:1403 flatcamTools/ToolRulesCheck.py:1412
msgid "STATUS"
msgstr "STATUS"

#: flatcamTools/ToolRulesCheck.py:1405
msgid "FAILED"
msgstr "FAILED"

#: flatcamTools/ToolRulesCheck.py:1414
msgid "PASSED"
msgstr "PASSED"

#: flatcamTools/ToolRulesCheck.py:1415
msgid "Violations: There are no violations for the current rule."
msgstr "Violations: There are no violations for the current rule."

#: flatcamTools/ToolShell.py:70 flatcamTools/ToolShell.py:72
msgid "...proccessing..."
msgstr "...proccessing..."

#: flatcamTools/ToolSolderPaste.py:37
msgid "Solder Paste Tool"
msgstr "Solder Paste Tool"

#: flatcamTools/ToolSolderPaste.py:65
msgid "Gerber Solder paste object.                        "
msgstr "Gerber Solder paste object.                        "

#: flatcamTools/ToolSolderPaste.py:72
msgid ""
"Tools pool from which the algorithm\n"
"will pick the ones used for dispensing solder paste."
msgstr ""
"Tools pool from which the algorithm\n"
"will pick the ones used for dispensing solder paste."

#: flatcamTools/ToolSolderPaste.py:87
msgid ""
"This is the Tool Number.\n"
"The solder dispensing will start with the tool with the biggest \n"
"diameter, continuing until there are no more Nozzle tools.\n"
"If there are no longer tools but there are still pads not covered\n"
" with solder paste, the app will issue a warning message box."
msgstr ""
"This is the Tool Number.\n"
"The solder dispensing will start with the tool with the biggest \n"
"diameter, continuing until there are no more Nozzle tools.\n"
"If there are no longer tools but there are still pads not covered\n"
" with solder paste, the app will issue a warning message box."

#: flatcamTools/ToolSolderPaste.py:94
msgid ""
"Nozzle tool Diameter. It's value (in current FlatCAM units)\n"
"is the width of the solder paste dispensed."
msgstr ""
"Nozzle tool Diameter. It's value (in current FlatCAM units)\n"
"is the width of the solder paste dispensed."

#: flatcamTools/ToolSolderPaste.py:101
msgid "New Nozzle Tool"
msgstr "New Nozzle Tool"

#: flatcamTools/ToolSolderPaste.py:117
msgid ""
"Add a new nozzle tool to the Tool Table\n"
"with the diameter specified above."
msgstr ""
"Add a new nozzle tool to the Tool Table\n"
"with the diameter specified above."

#: flatcamTools/ToolSolderPaste.py:129
msgid "Generate solder paste dispensing geometry."
msgstr "Generate solder paste dispensing geometry."

#: flatcamTools/ToolSolderPaste.py:142
msgid "STEP 1"
msgstr "STEP 1"

#: flatcamTools/ToolSolderPaste.py:144
msgid ""
"First step is to select a number of nozzle tools for usage\n"
"and then optionally modify the GCode parameters bellow."
msgstr ""
"First step is to select a number of nozzle tools for usage\n"
"and then optionally modify the GCode parameters bellow."

#: flatcamTools/ToolSolderPaste.py:147
msgid ""
"Select tools.\n"
"Modify parameters."
msgstr ""
"Select tools.\n"
"Modify parameters."

#: flatcamTools/ToolSolderPaste.py:235
msgid ""
"Feedrate (speed) while moving up vertically\n"
" to Dispense position (on Z plane)."
msgstr ""
"Feedrate (speed) while moving up vertically\n"
" to Dispense position (on Z plane)."

#: flatcamTools/ToolSolderPaste.py:289
msgid "Generate GCode"
msgstr "Generate GCode"

#: flatcamTools/ToolSolderPaste.py:291
msgid ""
"Generate GCode for Solder Paste dispensing\n"
"on PCB pads."
msgstr ""
"Generate GCode for Solder Paste dispensing\n"
"on PCB pads."

#: flatcamTools/ToolSolderPaste.py:306
msgid "STEP 2"
msgstr "STEP 2"

#: flatcamTools/ToolSolderPaste.py:308
msgid ""
"Second step is to create a solder paste dispensing\n"
"geometry out of an Solder Paste Mask Gerber file."
msgstr ""
"Second step is to create a solder paste dispensing\n"
"geometry out of an Solder Paste Mask Gerber file."

#: flatcamTools/ToolSolderPaste.py:324
msgid "Geo Result"
msgstr "Geo Result"

#: flatcamTools/ToolSolderPaste.py:326
msgid ""
"Geometry Solder Paste object.\n"
"The name of the object has to end in:\n"
"'_solderpaste' as a protection."
msgstr ""
"Geometry Solder Paste object.\n"
"The name of the object has to end in:\n"
"'_solderpaste' as a protection."

#: flatcamTools/ToolSolderPaste.py:335
msgid "STEP 3"
msgstr "STEP 3"

#: flatcamTools/ToolSolderPaste.py:337
msgid ""
"Third step is to select a solder paste dispensing geometry,\n"
"and then generate a CNCJob object.\n"
"\n"
"REMEMBER: if you want to create a CNCJob with new parameters,\n"
"first you need to generate a geometry with those new params,\n"
"and only after that you can generate an updated CNCJob."
msgstr ""
"Third step is to select a solder paste dispensing geometry,\n"
"and then generate a CNCJob object.\n"
"\n"
"REMEMBER: if you want to create a CNCJob with new parameters,\n"
"first you need to generate a geometry with those new params,\n"
"and only after that you can generate an updated CNCJob."

#: flatcamTools/ToolSolderPaste.py:357
msgid "CNC Result"
msgstr "CNC Result"

#: flatcamTools/ToolSolderPaste.py:359
msgid ""
"CNCJob Solder paste object.\n"
"In order to enable the GCode save section,\n"
"the name of the object has to end in:\n"
"'_solderpaste' as a protection."
msgstr ""
"CNCJob Solder paste object.\n"
"In order to enable the GCode save section,\n"
"the name of the object has to end in:\n"
"'_solderpaste' as a protection."

#: flatcamTools/ToolSolderPaste.py:369
msgid "View GCode"
msgstr "View GCode"

#: flatcamTools/ToolSolderPaste.py:371
msgid ""
"View the generated GCode for Solder Paste dispensing\n"
"on PCB pads."
msgstr ""
"View the generated GCode for Solder Paste dispensing\n"
"on PCB pads."

#: flatcamTools/ToolSolderPaste.py:375
msgid "Save GCode"
msgstr "Save GCode"

#: flatcamTools/ToolSolderPaste.py:377
msgid ""
"Save the generated GCode for Solder Paste dispensing\n"
"on PCB pads, to a file."
msgstr ""
"Save the generated GCode for Solder Paste dispensing\n"
"on PCB pads, to a file."

#: flatcamTools/ToolSolderPaste.py:381
msgid "STEP 4"
msgstr "STEP 4"

#: flatcamTools/ToolSolderPaste.py:383
msgid ""
"Fourth step (and last) is to select a CNCJob made from \n"
"a solder paste dispensing geometry, and then view/save it's GCode."
msgstr ""
"Fourth step (and last) is to select a CNCJob made from \n"
"a solder paste dispensing geometry, and then view/save it's GCode."

#: flatcamTools/ToolSolderPaste.py:825
msgid "Adding Nozzle tool cancelled. Tool already in Tool Table."
msgstr "Adding Nozzle tool cancelled. Tool already in Tool Table."

#: flatcamTools/ToolSolderPaste.py:831
msgid "New Nozzle tool added to Tool Table."
msgstr "New Nozzle tool added to Tool Table."

#: flatcamTools/ToolSolderPaste.py:874
msgid "Nozzle tool from Tool Table was edited."
msgstr "Nozzle tool from Tool Table was edited."

#: flatcamTools/ToolSolderPaste.py:932
msgid "Delete failed. Select a Nozzle tool to delete."
msgstr "Delete failed. Select a Nozzle tool to delete."

#: flatcamTools/ToolSolderPaste.py:938
msgid "Nozzle tool(s) deleted from Tool Table."
msgstr "Nozzle tool(s) deleted from Tool Table."

#: flatcamTools/ToolSolderPaste.py:994
msgid "No SolderPaste mask Gerber object loaded."
msgstr "No SolderPaste mask Gerber object loaded."

#: flatcamTools/ToolSolderPaste.py:1012
msgid "Creating Solder Paste dispensing geometry."
msgstr "Creating Solder Paste dispensing geometry."

#: flatcamTools/ToolSolderPaste.py:1025
msgid "No Nozzle tools in the tool table."
msgstr "No Nozzle tools in the tool table."

#: flatcamTools/ToolSolderPaste.py:1152
msgid "Cancelled. Empty file, it has no geometry..."
msgstr "Cancelled. Empty file, it has no geometry..."

#: flatcamTools/ToolSolderPaste.py:1156
msgid "Solder Paste geometry generated successfully"
msgstr "Solder Paste geometry generated successfully"

#: flatcamTools/ToolSolderPaste.py:1163
msgid "Some or all pads have no solder due of inadequate nozzle diameters..."
msgstr "Some or all pads have no solder due of inadequate nozzle diameters..."

#: flatcamTools/ToolSolderPaste.py:1177
msgid "Generating Solder Paste dispensing geometry..."
msgstr "Generating Solder Paste dispensing geometry..."

#: flatcamTools/ToolSolderPaste.py:1198
msgid "There is no Geometry object available."
msgstr "There is no Geometry object available."

#: flatcamTools/ToolSolderPaste.py:1203
msgid "This Geometry can't be processed. NOT a solder_paste_tool geometry."
msgstr "This Geometry can't be processed. NOT a solder_paste_tool geometry."

#: flatcamTools/ToolSolderPaste.py:1311
msgid "ToolSolderPaste CNCjob created"
msgstr "ToolSolderPaste CNCjob created"

#: flatcamTools/ToolSolderPaste.py:1344 flatcamTools/ToolSolderPaste.py:1349
#: flatcamTools/ToolSolderPaste.py:1404
msgid ""
"This CNCJob object can't be processed. NOT a solder_paste_tool CNCJob object."
msgstr ""
"This CNCJob object can't be processed. NOT a solder_paste_tool CNCJob object."

#: flatcamTools/ToolSolderPaste.py:1374
msgid "No Gcode in the object"
msgstr "No Gcode in the object"

#: flatcamTools/ToolSolderPaste.py:1414
msgid "Export GCode ..."
msgstr "Export GCode ..."

#: flatcamTools/ToolSolderPaste.py:1462
msgid "Solder paste dispenser GCode file saved to"
msgstr "Solder paste dispenser GCode file saved to"

#: flatcamTools/ToolSub.py:57
msgid "Gerber Objects"
msgstr "Gerber Objects"

#: flatcamTools/ToolSub.py:66 flatcamTools/ToolSub.py:112
msgid "Target"
msgstr "Target"

#: flatcamTools/ToolSub.py:68
msgid ""
"Gerber object from which to substract\n"
"the substractor Gerber object."
msgstr ""
"Gerber object from which to substract\n"
"the substractor Gerber object."

#: flatcamTools/ToolSub.py:80 flatcamTools/ToolSub.py:126
msgid "Substractor"
msgstr "Substractor"

#: flatcamTools/ToolSub.py:82
msgid ""
"Gerber object that will be substracted\n"
"from the target Gerber object."
msgstr ""
"Gerber object that will be substracted\n"
"from the target Gerber object."

#: flatcamTools/ToolSub.py:89
msgid "Substract Gerber"
msgstr "Substract Gerber"

#: flatcamTools/ToolSub.py:91
msgid ""
"Will remove the area occupied by the substractor\n"
"Gerber from the Target Gerber.\n"
"Can be used to remove the overlapping silkscreen\n"
"over the soldermask."
msgstr ""
"Will remove the area occupied by the substractor\n"
"Gerber from the Target Gerber.\n"
"Can be used to remove the overlapping silkscreen\n"
"over the soldermask."

#: flatcamTools/ToolSub.py:103
msgid "Geometry Objects"
msgstr "Geometry Objects"

#: flatcamTools/ToolSub.py:114
msgid ""
"Geometry object from which to substract\n"
"the substractor Geometry object."
msgstr ""
"Geometry object from which to substract\n"
"the substractor Geometry object."

#: flatcamTools/ToolSub.py:128
msgid ""
"Geometry object that will be substracted\n"
"from the target Geometry object."
msgstr ""
"Geometry object that will be substracted\n"
"from the target Geometry object."

#: flatcamTools/ToolSub.py:139
msgid "Substract Geometry"
msgstr "Substract Geometry"

#: flatcamTools/ToolSub.py:141
msgid ""
"Will remove the area occupied by the substractor\n"
"Geometry from the Target Geometry."
msgstr ""
"Will remove the area occupied by the substractor\n"
"Geometry from the Target Geometry."

#: flatcamTools/ToolSub.py:228
msgid "Sub Tool"
msgstr "Sub Tool"

#: flatcamTools/ToolSub.py:245 flatcamTools/ToolSub.py:447
msgid "No Target object loaded."
msgstr "No Target object loaded."

#: flatcamTools/ToolSub.py:260 flatcamTools/ToolSub.py:462
msgid "No Substractor object loaded."
msgstr "No Substractor object loaded."

#: flatcamTools/ToolSub.py:314
msgid "Parsing geometry for aperture"
msgstr "Parsing geometry for aperture"

#: flatcamTools/ToolSub.py:416 flatcamTools/ToolSub.py:619
msgid "Generating new object ..."
msgstr "Generating new object ..."

#: flatcamTools/ToolSub.py:420 flatcamTools/ToolSub.py:623
#: flatcamTools/ToolSub.py:704
msgid "Generating new object failed."
msgstr "Generating new object failed."

#: flatcamTools/ToolSub.py:425 flatcamTools/ToolSub.py:629
msgid "Created"
msgstr "Created"

#: flatcamTools/ToolSub.py:476
msgid "Currently, the Substractor geometry cannot be of type Multigeo."
msgstr "Currently, the Substractor geometry cannot be of type Multigeo."

#: flatcamTools/ToolSub.py:521
msgid "Parsing solid_geometry ..."
msgstr "Parsing solid_geometry ..."

#: flatcamTools/ToolSub.py:523
msgid "Parsing solid_geometry for tool"
msgstr "Parsing solid_geometry for tool"

#: flatcamTools/ToolTransform.py:23
msgid "Object Transform"
msgstr "Object Transform"

#: flatcamTools/ToolTransform.py:80
msgid ""
"Rotate the selected object(s).\n"
"The point of reference is the middle of\n"
"the bounding box for all selected objects."
msgstr ""
"Rotate the selected object(s).\n"
"The point of reference is the middle of\n"
"the bounding box for all selected objects."

#: flatcamTools/ToolTransform.py:96
#| msgid "Skew_X angle"
msgid "X angle"
msgstr "X angle"

#: flatcamTools/ToolTransform.py:98 flatcamTools/ToolTransform.py:120
#| msgid ""
#| "Angle for Skew action, in degrees.\n"
#| "Float number between -360 and 359."
msgid ""
"Angle for Skew action, in degrees.\n"
"Float number between -360 and 360."
msgstr ""
"Angle for Skew action, in degrees.\n"
"Float number between -360 and 360."

#: flatcamTools/ToolTransform.py:109 flatcamTools/ToolTransform.py:131
msgid ""
"Skew/shear the selected object(s).\n"
"The point of reference is the middle of\n"
"the bounding box for all selected objects."
msgstr ""
"Skew/shear the selected object(s).\n"
"The point of reference is the middle of\n"
"the bounding box for all selected objects."

#: flatcamTools/ToolTransform.py:118
#| msgid "Skew_Y angle"
msgid "Y angle"
msgstr "Y angle"

#: flatcamTools/ToolTransform.py:146
#| msgid "Scale_X factor"
msgid "X factor"
msgstr "X factor"

#: flatcamTools/ToolTransform.py:158 flatcamTools/ToolTransform.py:179
msgid ""
"Scale the selected object(s).\n"
"The point of reference depends on \n"
"the Scale reference checkbox state."
msgstr ""
"Scale the selected object(s).\n"
"The point of reference depends on \n"
"the Scale reference checkbox state."

#: flatcamTools/ToolTransform.py:167
#| msgid "Scale_Y factor"
msgid "Y factor"
msgstr "Y factor"

#: flatcamTools/ToolTransform.py:215
msgid "X val"
msgstr "X val"

#: flatcamTools/ToolTransform.py:227 flatcamTools/ToolTransform.py:248
msgid ""
"Offset the selected object(s).\n"
"The point of reference is the middle of\n"
"the bounding box for all selected objects.\n"
msgstr ""
"Offset the selected object(s).\n"
"The point of reference is the middle of\n"
"the bounding box for all selected objects.\n"

#: flatcamTools/ToolTransform.py:236
msgid "Y val"
msgstr "Y val"

#: flatcamTools/ToolTransform.py:266 flatcamTools/ToolTransform.py:272
#| msgid ""
#| "Flip the selected object(s) over the X axis.\n"
#| "Does not create a new object.\n"
#| " "
msgid "Flip the selected object(s) over the X axis."
msgstr "Flip the selected object(s) over the X axis."

#: flatcamTools/ToolTransform.py:297
#| msgid " Mirror Ref. Point"
msgid "Ref. Point"
msgstr "Ref. Point"

#: flatcamTools/ToolTransform.py:436
msgid "Rotate transformation can not be done for a value of 0."
msgstr "Rotate transformation can not be done for a value of 0."

#: flatcamTools/ToolTransform.py:475 flatcamTools/ToolTransform.py:498
msgid "Scale transformation can not be done for a factor of 0 or 1."
msgstr "Scale transformation can not be done for a factor of 0 or 1."

#: flatcamTools/ToolTransform.py:514 flatcamTools/ToolTransform.py:525
msgid "Offset transformation can not be done for a value of 0."
msgstr "Offset transformation can not be done for a value of 0."

#: flatcamTools/ToolTransform.py:541
msgid "No object selected. Please Select an object to rotate!"
msgstr "No object selected. Please Select an object to rotate!"

#: flatcamTools/ToolTransform.py:569
msgid "CNCJob objects can't be rotated."
msgstr "CNCJob objects can't be rotated."

#: flatcamTools/ToolTransform.py:577
msgid "Rotate done"
msgstr "Rotate done"

#: flatcamTools/ToolTransform.py:582 flatcamTools/ToolTransform.py:657
#: flatcamTools/ToolTransform.py:712 flatcamTools/ToolTransform.py:771
#: flatcamTools/ToolTransform.py:807
msgid "Due of"
msgstr "Due of"

#: flatcamTools/ToolTransform.py:582 flatcamTools/ToolTransform.py:657
#: flatcamTools/ToolTransform.py:712 flatcamTools/ToolTransform.py:771
#: flatcamTools/ToolTransform.py:807
msgid "action was not executed."
msgstr "action was not executed."

#: flatcamTools/ToolTransform.py:594
msgid "No object selected. Please Select an object to flip"
msgstr "No object selected. Please Select an object to flip"

#: flatcamTools/ToolTransform.py:629
msgid "CNCJob objects can't be mirrored/flipped."
msgstr "CNCJob objects can't be mirrored/flipped."

#: flatcamTools/ToolTransform.py:667
msgid "Skew transformation can not be done for 0, 90 and 180 degrees."
msgstr "Skew transformation can not be done for 0, 90 and 180 degrees."

#: flatcamTools/ToolTransform.py:672
msgid "No object selected. Please Select an object to shear/skew!"
msgstr "No object selected. Please Select an object to shear/skew!"

#: flatcamTools/ToolTransform.py:694
msgid "CNCJob objects can't be skewed."
msgstr "CNCJob objects can't be skewed."

#: flatcamTools/ToolTransform.py:707
msgid "Skew on the"
msgstr "Skew on the"

#: flatcamTools/ToolTransform.py:707 flatcamTools/ToolTransform.py:767
#: flatcamTools/ToolTransform.py:802
msgid "axis done"
msgstr "axis done"

#: flatcamTools/ToolTransform.py:724
msgid "No object selected. Please Select an object to scale!"
msgstr "No object selected. Please Select an object to scale!"

#: flatcamTools/ToolTransform.py:757
msgid "CNCJob objects can't be scaled."
msgstr "CNCJob objects can't be scaled."

#: flatcamTools/ToolTransform.py:767
msgid "Scale on the"
msgstr "Scale on the"

#: flatcamTools/ToolTransform.py:779
msgid "No object selected. Please Select an object to offset!"
msgstr "No object selected. Please Select an object to offset!"

#: flatcamTools/ToolTransform.py:788
msgid "CNCJob objects can't be offset."
msgstr "CNCJob objects can't be offset."

#: flatcamTools/ToolTransform.py:802
msgid "Offset on the"
msgstr "Offset on the"

#: tclCommands/TclCommandBbox.py:70 tclCommands/TclCommandNregions.py:68
msgid "Expected FlatCAMGerber or FlatCAMGeometry, got"
msgstr "Expected FlatCAMGerber or FlatCAMGeometry, got"

#: tclCommands/TclCommandBounds.py:64 tclCommands/TclCommandBounds.py:68
msgid "Expected a list of objects names separated by comma. Got"
msgstr "Expected a list of objects names separated by comma. Got"

#: tclCommands/TclCommandBounds.py:79
msgid "TclCommand Bounds done."
msgstr "TclCommand Bounds done."

#: tclCommands/TclCommandCopperClear.py:237 tclCommands/TclCommandPaint.py:235
msgid "Expected -box <value>."
msgstr "Expected -box <value>."

#: tclCommands/TclCommandCopperClear.py:246 tclCommands/TclCommandPaint.py:244
#: tclCommands/TclCommandScale.py:63
msgid "Could not retrieve box object"
msgstr "Could not retrieve box object"

#: tclCommands/TclCommandCopperClear.py:268
msgid ""
"None of the following args: 'ref', 'all' were found or none was set to 1.\n"
"Copper clearing failed."
msgstr ""
"None of the following args: 'ref', 'all' were found or none was set to 1.\n"
"Copper clearing failed."

#: tclCommands/TclCommandPaint.py:212
msgid "Expected -x <value> and -y <value>."
msgstr "Expected -x <value> and -y <value>."

#: tclCommands/TclCommandPaint.py:263
msgid ""
"There was none of the following args: 'ref', 'single', 'all'.\n"
"Paint failed."
msgstr ""
"There was none of the following args: 'ref', 'single', 'all'.\n"
"Paint failed."

#: tclCommands/TclCommandScale.py:83
msgid "Expected -origin <origin> or -origin <min_bounds> or -origin <center>."
msgstr "Expected -origin <origin> or -origin <min_bounds> or -origin <center>."

#: tclCommands/TclCommandScale.py:92
msgid "Expected -x <value> -y <value>."
msgstr "Expected -x <value> -y <value>."

#: tclCommands/TclCommandSetOrigin.py:80
msgid "Expected a pair of (x, y) coordinates. Got"
msgstr "Expected a pair of (x, y) coordinates. Got"

#: tclCommands/TclCommandSetOrigin.py:87
msgid "Origin set by offsetting all loaded objects with "
msgstr "Origin set by offsetting all loaded objects with "

#: tclCommands/TclCommandSubtractRectangle.py:49
msgid "No Geometry name in args. Provide a name and try again."
msgstr "No Geometry name in args. Provide a name and try again."

#~ msgid "Go"
#~ msgstr "Go"

#~ msgid "There are no polygons to mark area."
#~ msgstr "There are no polygons to mark area."

#~ msgid "&Edit"
#~ msgstr "&Edit"

#~ msgid "&Options"
#~ msgstr "&Options"

#~ msgid "Measurement Tool"
#~ msgstr "Measurement Tool"

#~ msgid "Margin value is missing or wrong format. Add it and retry."
#~ msgstr "Margin value is missing or wrong format. Add it and retry."

#~ msgid "Gap size value is missing or wrong format. Add it and retry."
#~ msgstr "Gap size value is missing or wrong format. Add it and retry."

#~ msgid "Measurement"
#~ msgstr "Measurement"

#~ msgid "Meas. Tool"
#~ msgstr "Meas. Tool"

#~ msgid "Not available with the current Graphic Engine Legacy(2D)."
#~ msgstr "Not available with the current Graphic Engine Legacy(2D)."

#~ msgid "ToolMove.on_left_click()"
#~ msgstr "ToolMove.on_left_click()"

#~ msgid "on_paint_button_click"
#~ msgstr "on_paint_button_click"

#~ msgid "PaintTool.paint_poly()"
#~ msgstr "PaintTool.paint_poly()"

#~ msgid "ToolSolderPaste.on_view_gcode()"
#~ msgstr "ToolSolderPaste.on_view_gcode()"

#~ msgid "App.on_fileopenscript() -->"
#~ msgstr "App.on_fileopenscript() -->"

#~ msgid "<span style=\"color:green;\"><b>%s</b></span>"
#~ msgstr "<span style=\"color:green;\"><b>%s</b></span>"

#~ msgid "<span style=\"color:red;\"><b>%s</b></span>"
#~ msgstr "<span style=\"color:red;\"><b>%s</b></span>"

#~ msgid "FlatCAMObj.FlatCAMGeometry.mtool_gen_cncjob() -->"
#~ msgstr "FlatCAMObj.FlatCAMGeometry.mtool_gen_cncjob() -->"

#~ msgid "FlatCAMCNNJob.on_edit_code_click() -->"
#~ msgstr "FlatCAMCNNJob.on_edit_code_click() -->"

#~ msgid ""
#~ "toolbars, key shortcuts or even dragging and dropping the files on the GUI"
#~ msgstr ""
#~ "toolbars, key shortcuts or even dragging and dropping the files on the GUI"

#~ msgid ""
#~ "You can also load a FlatCAM project by double clicking on the project "
#~ "file, drag"
#~ msgstr ""
#~ "You can also load a FlatCAM project by double clicking on the project "
#~ "file, drag"

#~ msgid ""
#~ "Once an object is available in the Project Tab, by selecting it and then "
#~ "focusing on"
#~ msgstr ""
#~ "Once an object is available in the Project Tab, by selecting it and then "
#~ "focusing on"

#~ msgid "SELECTED TAB"
#~ msgstr "SELECTED TAB"

#~ msgid "more simpler is to double click the object name in the Project Tab"
#~ msgstr "more simpler is to double click the object name in the Project Tab"

#~ msgid "will be updated with the object properties according to"
#~ msgstr "will be updated with the object properties according to"

#~ msgid "kind: Gerber, Excellon, Geometry or CNCJob object"
#~ msgstr "kind: Gerber, Excellon, Geometry or CNCJob object"

#~ msgid ""
#~ "If the selection of the object is done on the canvas by single click "
#~ "instead, and the"
#~ msgstr ""
#~ "If the selection of the object is done on the canvas by single click "
#~ "instead, and the"

#~ msgid "and populate it even if it was out of focus"
#~ msgstr "and populate it even if it was out of focus"

#~ msgid "Gerber/Excellon Object"
#~ msgstr "Gerber/Excellon Object"

#~ msgid "Change Parameter"
#~ msgstr "Change Parameter"

#~ msgid "Add tools (change param in Selected Tab)"
#~ msgstr "Add tools (change param in Selected Tab)"

#~ msgid "Generate CNCJob"
#~ msgstr "Generate CNCJob"

#~ msgid "CNCJob Object"
#~ msgstr "CNCJob Object"

#~ msgid ""
#~ "Verify GCode (through Edit CNC Code) and/or append/prepend to GCode "
#~ "(again, done in"
#~ msgstr ""
#~ "Verify GCode (through Edit CNC Code) and/or append/prepend to GCode "
#~ "(again, done in"

#~ msgid "Help"
#~ msgstr "Help"

#~ msgid "Shortcuts List"
#~ msgstr "Shortcuts List"

#~ msgid "or through"
#~ msgstr "or through"

#~ msgid "own key shortcut"
#~ msgstr "own key shortcut"

#~ msgid "polygons"
#~ msgstr "polygons"

#~ msgid "geo"
#~ msgstr "geo"

#~ msgid "Start"
#~ msgstr "Start"

#~ msgid "Stop"
#~ msgstr "Stop"

#~ msgid "Generating panel ..."
#~ msgstr "Generating panel ..."

#~ msgid "Spawning copies"
#~ msgstr "Spawning copies"

#~ msgid "Parsing tool"
#~ msgstr "Parsing tool"

#~ msgid ""
#~ " Wrong value format for self.defaults[\"feedrate_probe\"] or self."
#~ "options[\"feedrate_probe\"]"
#~ msgstr ""
#~ " Wrong value format for self.defaults[\"feedrate_probe\"] or self."
#~ "options[\"feedrate_probe\"]"

#~ msgid "Wrong optimization type selected."
#~ msgstr "Wrong optimization type selected."

#~ msgid "FILE ASSOCIATIONS"
#~ msgstr "FILE ASSOCIATIONS"

#~ msgid "Advanced Param."
#~ msgstr "Advanced Param."

#~ msgid "MH"
#~ msgstr "MH"

#~ msgid "Feedrate (Plunge)"
#~ msgstr "Feedrate (Plunge)"

#~ msgid ""
#~ "Parameters used to create a CNC Job object\n"
#~ "for this drill object that are shown when App Level is Advanced."
#~ msgstr ""
#~ "Parameters used to create a CNC Job object\n"
#~ "for this drill object that are shown when App Level is Advanced."

#~ msgid ""
#~ "Parameters to create a CNC Job object\n"
#~ "tracing the contours of a Geometry object."
#~ msgstr ""
#~ "Parameters to create a CNC Job object\n"
#~ "tracing the contours of a Geometry object."

#~ msgid "Manufacturing"
#~ msgstr "Manufacturing"

#~ msgid "Function"
#~ msgstr "Function"

#~ msgid ""
#~ "Juan Pablo Caram <BR><BR>Denis Hayrullin<BR>Kamil Sopko<BR>Marius "
#~ "Stanciu<BR>Matthieu Berthomé<BR><Br>and many others found <a href = "
#~ "\"https://bitbucket.org/jpcgt/flatcam/pull-requests/?state=MERGED\">here."
#~ "</a><BR><BR>"
#~ msgstr ""
#~ "Juan Pablo Caram <BR><BR>Denis Hayrullin<BR>Kamil Sopko<BR>Marius "
#~ "Stanciu<BR>Matthieu Berthomé<BR><Br>and many others found <a href = "
#~ "\"https://bitbucket.org/jpcgt/flatcam/pull-requests/?state=MERGED\">here."
#~ "</a><BR><BR>"

#~ msgid ""
#~ "\n"
#~ "<p><span style=\"font-size:{tsize}px\"><strong>Selected Tab - Choose an "
#~ "Item from Project Tab</strong></span></p>\n"
#~ "\n"
#~ "<p><span style=\"font-size:{fsize}px\"><strong>Details</strong>:<br />\n"
#~ "The normal flow when working in FlatCAM is the following:</span></p>\n"
#~ "\n"
#~ "<ol>\n"
#~ "\t<li><span style=\"font-size:{fsize}px\">Loat/Import a Gerber, Excellon, "
#~ "Gcode, DXF, Raster Image or SVG file into FlatCAM using either the "
#~ "menu&#39;s, toolbars, key shortcuts or even dragging and dropping the "
#~ "files on the GUI.<br />\n"
#~ "\t<br />\n"
#~ "\tYou can also load a <strong>FlatCAM project</strong> by double clicking "
#~ "on the project file, drag &amp; drop of the file into the FLATCAM GUI or "
#~ "through the menu/toolbar links offered within the app.</span><br />\n"
#~ "\t&nbsp;</li>\n"
#~ "\t<li><span style=\"font-size:{fsize}px\">Once an object is available in "
#~ "the Project Tab, by selecting it and then focusing on <strong>SELECTED "
#~ "TAB </strong>(more simpler is to double click the object name in the "
#~ "Project Tab), <strong>SELECTED TAB </strong>will be updated with the "
#~ "object properties according to it&#39;s kind: Gerber, Excellon, Geometry "
#~ "or CNCJob object.<br />\n"
#~ "\t<br />\n"
#~ "\tIf the selection of the object is done on the canvas by single click "
#~ "instead, and the <strong>SELECTED TAB</strong> is in focus, again the "
#~ "object properties will be displayed into the Selected Tab. Alternatively, "
#~ "double clicking on the object on the canvas will bring the "
#~ "<strong>SELECTED TAB</strong> and populate it even if it was out of focus."
#~ "<br />\n"
#~ "\t<br />\n"
#~ "\tYou can change the parameters in this screen and the flow direction is "
#~ "like this:<br />\n"
#~ "\t<br />\n"
#~ "\t<strong>Gerber/Excellon Object</strong> -&gt; Change Param -&gt; "
#~ "Generate Geometry -&gt;<strong> Geometry Object </strong>-&gt; Add tools "
#~ "(change param in Selected Tab) -&gt; Generate CNCJob -&gt;<strong> CNCJob "
#~ "Object </strong>-&gt; Verify GCode (through Edit CNC Code) and/or append/"
#~ "prepend to GCode (again, done in <strong>SELECTED TAB)&nbsp;</strong>-"
#~ "&gt; Save GCode</span></li>\n"
#~ "</ol>\n"
#~ "\n"
#~ "<p><span style=\"font-size:{fsize}px\">A list of key shortcuts is "
#~ "available through an menu entry in <strong>Help -&gt; Shortcuts List</"
#~ "strong>&nbsp;or through it&#39;s own key shortcut: <strong>F3</strong>.</"
#~ "span></p>\n"
#~ "\n"
#~ "        "
#~ msgstr ""
#~ "\n"
#~ "<p><span style=\"font-size:{tsize}px\"><strong>Selected Tab - Choose an "
#~ "Item from Project Tab</strong></span></p>\n"
#~ "\n"
#~ "<p><span style=\"font-size:{fsize}px\"><strong>Details</strong>:<br />\n"
#~ "The normal flow when working in FlatCAM is the following:</span></p>\n"
#~ "\n"
#~ "<ol>\n"
#~ "\t<li><span style=\"font-size:{fsize}px\">Loat/Import a Gerber, Excellon, "
#~ "Gcode, DXF, Raster Image or SVG file into FlatCAM using either the "
#~ "menu&#39;s, toolbars, key shortcuts or even dragging and dropping the "
#~ "files on the GUI.<br />\n"
#~ "\t<br />\n"
#~ "\tYou can also load a <strong>FlatCAM project</strong> by double clicking "
#~ "on the project file, drag &amp; drop of the file into the FLATCAM GUI or "
#~ "through the menu/toolbar links offered within the app.</span><br />\n"
#~ "\t&nbsp;</li>\n"
#~ "\t<li><span style=\"font-size:{fsize}px\">Once an object is available in "
#~ "the Project Tab, by selecting it and then focusing on <strong>SELECTED "
#~ "TAB </strong>(more simpler is to double click the object name in the "
#~ "Project Tab), <strong>SELECTED TAB </strong>will be updated with the "
#~ "object properties according to it&#39;s kind: Gerber, Excellon, Geometry "
#~ "or CNCJob object.<br />\n"
#~ "\t<br />\n"
#~ "\tIf the selection of the object is done on the canvas by single click "
#~ "instead, and the <strong>SELECTED TAB</strong> is in focus, again the "
#~ "object properties will be displayed into the Selected Tab. Alternatively, "
#~ "double clicking on the object on the canvas will bring the "
#~ "<strong>SELECTED TAB</strong> and populate it even if it was out of focus."
#~ "<br />\n"
#~ "\t<br />\n"
#~ "\tYou can change the parameters in this screen and the flow direction is "
#~ "like this:<br />\n"
#~ "\t<br />\n"
#~ "\t<strong>Gerber/Excellon Object</strong> -&gt; Change Param -&gt; "
#~ "Generate Geometry -&gt;<strong> Geometry Object </strong>-&gt; Add tools "
#~ "(change param in Selected Tab) -&gt; Generate CNCJob -&gt;<strong> CNCJob "
#~ "Object </strong>-&gt; Verify GCode (through Edit CNC Code) and/or append/"
#~ "prepend to GCode (again, done in <strong>SELECTED TAB)&nbsp;</strong>-"
#~ "&gt; Save GCode</span></li>\n"
#~ "</ol>\n"
#~ "\n"
#~ "<p><span style=\"font-size:{fsize}px\">A list of key shortcuts is "
#~ "available through an menu entry in <strong>Help -&gt; Shortcuts List</"
#~ "strong>&nbsp;or through it&#39;s own key shortcut: <strong>F3</strong>.</"
#~ "span></p>\n"
#~ "\n"
#~ "        "

#~ msgid "Run Script ...\tSHIFT+S"
#~ msgstr "Run Script ...\tSHIFT+S"

#~| msgid ""
#~| "<font size=8><B>FlatCAM</B></font><BR>Version {version} {beta} ({date}) "
#~| "- {arch} <BR><BR>2D Computer-Aided Printed Circuit "
#~| "Board<BR>Manufacturing.<BR><BR>(c) 2014-2019 <B>Juan Pablo Caram</"
#~| "B><BR><BR><B> Main Contributors:</B><BR>Denis Hayrullin<BR>Kamil "
#~| "Sopko<BR>Marius Stanciu<BR>Matthieu Berthomé<BR>and many others found <a "
#~| "href = \"https://bitbucket.org/jpcgt/flatcam/pull-requests/?state=MERGED"
#~| "\">here.</a><BR><BR>Development is done <a href = \"https://bitbucket."
#~| "org/jpcgt/flatcam/src/Beta/\">here.</a><BR>DOWNLOAD area <a href = "
#~| "\"https://bitbucket.org/jpcgt/flatcam/downloads/\">here.</a><BR>"
#~ msgid ""
#~ "<font size=8><B>FlatCAM</B></font><BR>Version {version} {beta} ({date}) - "
#~ "{arch} <BR><BR>2D Computer-Aided Printed Circuit Board<BR>Manufacturing."
#~ "<BR><BR><B> License: </B><BR>Licensed under MIT license (2014 - "
#~ "2019)<BR>by (c)Juan Pablo Caram <BR><BR><B> Programmers:</B><BR>Denis "
#~ "Hayrullin<BR>Kamil Sopko<BR>Marius Stanciu<BR>Matthieu Berthomé<BR>and "
#~ "many others found <a href = \"https://bitbucket.org/jpcgt/flatcam/pull-"
#~ "requests/?state=MERGED\">here.</a><BR><BR><B>Development</B> is done <a "
#~ "href = \"https://bitbucket.org/jpcgt/flatcam/src/Beta/\">here.</"
#~ "a><BR><b>DOWNLOAD</B> area <a href = \"https://bitbucket.org/jpcgt/"
#~ "flatcam/downloads/\">here.</a><BR>"
#~ msgstr ""
#~ "<font size=8><B>FlatCAM</B></font><BR>Version {version} {beta} ({date}) - "
#~ "{arch} <BR><BR>2D Computer-Aided Printed Circuit Board<BR>Manufacturing."
#~ "<BR><BR><B> License: </B><BR>Licensed under MIT license (2014 - "
#~ "2019)<BR>by (c)Juan Pablo Caram <BR><BR><B> Programmers:</B><BR>Denis "
#~ "Hayrullin<BR>Kamil Sopko<BR>Marius Stanciu<BR>Matthieu Berthomé<BR>and "
#~ "many others found <a href = \"https://bitbucket.org/jpcgt/flatcam/pull-"
#~ "requests/?state=MERGED\">here.</a><BR><BR><B>Development</B> is done <a "
#~ "href = \"https://bitbucket.org/jpcgt/flatcam/src/Beta/\">here.</"
#~ "a><BR><b>DOWNLOAD</B> area <a href = \"https://bitbucket.org/jpcgt/"
#~ "flatcam/downloads/\">here.</a><BR>"

#~| msgid "[ERROR_NOTCL] Expected a FlatCAMGeometry, got %s"
#~ msgid "Expected a FlatCAMGeometry, got %s"
#~ msgstr "Expected a FlatCAMGeometry, got %s"

#~ msgid "Saved to: %s"
#~ msgstr "Saved to: %s"

#~ msgid "[WARNING_NOTCL] Adding Tool cancelled ..."
#~ msgstr "[WARNING_NOTCL] Adding Tool cancelled ..."

#~ msgid "%s"
#~ msgstr "%s"

#~| msgid "[ERROR]App.on_view_source() -->%s"
#~ msgid "App.on_view_source() -->"
#~ msgstr "App.on_view_source() -->"

#~ msgid "[success] Name changed from {old} to {new}"
#~ msgstr "[success] Name changed from {old} to {new}"

#~| msgid ""
#~| "[ERROR_NOTCL] Failed.\n"
#~| "%s"
#~ msgid "[ERROR_NOTCL] %s"
#~ msgstr "[ERROR_NOTCL] %s"

#~ msgid "Editor %s"
#~ msgstr "Editor %s"

#~ msgid "[success] Done. Path completed."
#~ msgstr "[success] Done. Path completed."

#~ msgid "[success] Paint done."
#~ msgstr "[success] Paint done."

#~ msgid "About"
#~ msgstr "About"

#~| msgid ""
#~| "<b>General Shortcut list</b><br>\n"
#~| "            <table border=\"0\" cellpadding=\"0\" cellspacing=\"0\" "
#~| "style=\"width:283px\">\n"
#~| "                <tbody>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\" width=\"89\"><strong>F3</"
#~| "strong></td>\n"
#~| "                        <td width=\"194\"><span style=\"color:"
#~| "#006400\"><strong>&nbsp;SHOW SHORTCUT LIST</strong></span></td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\">&nbsp;</td>\n"
#~| "                        <td>&nbsp;</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>1</strong></td>\n"
#~| "                        <td>&nbsp;Switch to Project Tab</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>2</strong></td>\n"
#~| "                        <td>&nbsp;Switch to Selected Tab</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>3</strong></td>\n"
#~| "                        <td>&nbsp;Switch to Tool Tab</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\">&nbsp;</td>\n"
#~| "                        <td>&nbsp;</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>B</strong></td>\n"
#~| "                        <td>&nbsp;New Gerber</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>E</strong></td>\n"
#~| "                        <td>&nbsp;Edit Object (if selected)</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>G</strong></td>\n"
#~| "                        <td>&nbsp;Grid On/Off</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>J</strong></td>\n"
#~| "                        <td>&nbsp;Jump to Coordinates</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>L</strong></td>\n"
#~| "                        <td>&nbsp;New Excellon</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>M</strong></td>\n"
#~| "                        <td>&nbsp;Move Obj</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>N</strong></td>\n"
#~| "                        <td>&nbsp;New Geometry</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>O</strong></td>\n"
#~| "                        <td>&nbsp;Set Origin</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>Q</strong></td>\n"
#~| "                        <td>&nbsp;Change Units</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>P</strong></td>\n"
#~| "                        <td>&nbsp;Open Properties Tool</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>R</strong></td>\n"
#~| "                        <td>&nbsp;Rotate by 90 degree CW</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>S</strong></td>\n"
#~| "                        <td>&nbsp;Shell Toggle</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>T</strong></td>\n"
#~| "                        <td>&nbsp;Add a Tool (when in Geometry Selected "
#~| "Tab or in Tools NCC or Tools Paint)</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>V</strong></td>\n"
#~| "                        <td>&nbsp;Zoom Fit</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>X</strong></td>\n"
#~| "                        <td>&nbsp;Flip on X_axis</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>Y</strong></td>\n"
#~| "                        <td>&nbsp;Flip on Y_axis</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>&#39;-&#39;</strong></"
#~| "td>\n"
#~| "                        <td>&nbsp;Zoom Out</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>&#39;=&#39;</strong></"
#~| "td>\n"
#~| "                        <td>&nbsp;Zoom In</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\">&nbsp;</td>\n"
#~| "                        <td>&nbsp;</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>CTRL+A</strong></td>\n"
#~| "                        <td>&nbsp;Select All</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>CTRL+C</strong></td>\n"
#~| "                        <td>&nbsp;Copy Obj</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>CTRL+E</strong></td>\n"
#~| "                        <td>&nbsp;Open Excellon File</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>CTRL+G</strong></td>\n"
#~| "                        <td>&nbsp;Open Gerber File</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>CTRL+N</strong></td>\n"
#~| "                        <td>&nbsp;New Project</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>CTRL+M</strong></td>\n"
#~| "                        <td>&nbsp;Measurement Tool</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>CTRL+O</strong></td>\n"
#~| "                        <td>&nbsp;Open Project</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>CTRL+S</strong></td>\n"
#~| "                        <td>&nbsp;Save Project As</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>CTRL+F10</strong></"
#~| "td>\n"
#~| "                        <td>&nbsp;Toggle Plot Area</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\">&nbsp;</td>\n"
#~| "                        <td>&nbsp;</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>SHIFT+C</strong></td>\n"
#~| "                        <td>&nbsp;Copy Obj_Name</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>SHIFT+E</strong></td>\n"
#~| "                        <td>&nbsp;Toggle Code Editor</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>SHIFT+G</strong></td>\n"
#~| "                        <td>&nbsp;Toggle the axis</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>SHIFT+P</strong></td>\n"
#~| "                        <td>&nbsp;Open Preferences Window</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>SHIFT+R</strong></td>\n"
#~| "                        <td>&nbsp;Rotate by 90 degree CCW</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>SHIFT+S</strong></td>\n"
#~| "                        <td>&nbsp;Run a Script</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>SHIFT+W</strong></td>\n"
#~| "                        <td>&nbsp;Toggle the workspace</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>SHIFT+X</strong></td>\n"
#~| "                        <td>&nbsp;Skew on X axis</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>SHIFT+Y</strong></td>\n"
#~| "                        <td>&nbsp;Skew on Y axis</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\">&nbsp;</td>\n"
#~| "                        <td>&nbsp;</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>ALT+C</strong></td>\n"
#~| "                        <td>&nbsp;Calculators Tool</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>ALT+D</strong></td>\n"
#~| "                        <td>&nbsp;2-Sided PCB Tool</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>ALT+K</strong></td>\n"
#~| "                        <td>&nbsp;Solder Paste Dispensing Tool</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>ALT+L</strong></td>\n"
#~| "                        <td>&nbsp;Film PCB Tool</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>ALT+N</strong></td>\n"
#~| "                        <td>&nbsp;Non-Copper Clearing Tool</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>ALT+P</strong></td>\n"
#~| "                        <td>&nbsp;Paint Area Tool</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>ALT+Q</strong></td>\n"
#~| "                        <td>&nbsp;PDF Import Tool</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>ALT+R</strong></td>\n"
#~| "                        <td>&nbsp;Transformations Tool</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>ALT+S</strong></td>\n"
#~| "                        <td>&nbsp;View File Source</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>ALT+U</strong></td>\n"
#~| "                        <td>&nbsp;Cutout PCB Tool</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>ALT+1</strong></td>\n"
#~| "                        <td>&nbsp;Enable all Plots</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>ALT+2</strong></td>\n"
#~| "                        <td>&nbsp;Disable all Plots</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>ALT+3</strong></td>\n"
#~| "                        <td>&nbsp;Disable Non-selected Plots</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>ALT+F10</strong></td>\n"
#~| "                        <td>&nbsp;Toggle Full Screen</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\">&nbsp;</td>\n"
#~| "                        <td>&nbsp;</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>F1</strong></td>\n"
#~| "                        <td>&nbsp;Open Online Manual</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>F4</strong></td>\n"
#~| "                        <td>&nbsp;Open Online Tutorials</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>Del</strong></td>\n"
#~| "                        <td>&nbsp;Delete Object</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>Del</strong></td>\n"
#~| "                        <td>&nbsp;Alternate: Delete Tool</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>'`'</strong></td>\n"
#~| "                        <td>&nbsp;(left to Key_1)Toogle Notebook Area "
#~| "(Left Side)</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>SPACE</strong></td>\n"
#~| "                        <td>&nbsp;En(Dis)able Obj Plot</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>Escape</strong></td>\n"
#~| "                        <td>&nbsp;Deselects all objects</td>\n"
#~| "                    </tr>\n"
#~| "                </tbody>\n"
#~| "            </table>\n"
#~| "    \n"
#~| "            "
#~ msgid ""
#~ "<b>General Shortcut list</b><br>\n"
#~ "            <table border=\"0\" cellpadding=\"0\" cellspacing=\"0\" style="
#~ "\"width:283px\">\n"
#~ "                <tbody>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\" width=\"89\"><strong>F3</"
#~ "strong></td>\n"
#~ "                        <td width=\"194\"><span style=\"color:"
#~ "#006400\"><strong>&nbsp;SHOW SHORTCUT LIST</strong></span></td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>1</strong></td>\n"
#~ "                        <td>&nbsp;Switch to Project Tab</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>2</strong></td>\n"
#~ "                        <td>&nbsp;Switch to Selected Tab</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>3</strong></td>\n"
#~ "                        <td>&nbsp;Switch to Tool Tab</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>B</strong></td>\n"
#~ "                        <td>&nbsp;New Gerber</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>E</strong></td>\n"
#~ "                        <td>&nbsp;Edit Object (if selected)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>G</strong></td>\n"
#~ "                        <td>&nbsp;Grid On/Off</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>J</strong></td>\n"
#~ "                        <td>&nbsp;Jump to Coordinates</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>L</strong></td>\n"
#~ "                        <td>&nbsp;New Excellon</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>M</strong></td>\n"
#~ "                        <td>&nbsp;Move Obj</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>N</strong></td>\n"
#~ "                        <td>&nbsp;New Geometry</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>O</strong></td>\n"
#~ "                        <td>&nbsp;Set Origin</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Q</strong></td>\n"
#~ "                        <td>&nbsp;Change Units</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>P</strong></td>\n"
#~ "                        <td>&nbsp;Open Properties Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>R</strong></td>\n"
#~ "                        <td>&nbsp;Rotate by 90 degree CW</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>S</strong></td>\n"
#~ "                        <td>&nbsp;Shell Toggle</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>T</strong></td>\n"
#~ "                        <td>&nbsp;Add a Tool (when in Geometry Selected "
#~ "Tab or in Tools NCC or Tools Paint)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>V</strong></td>\n"
#~ "                        <td>&nbsp;Zoom Fit</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>X</strong></td>\n"
#~ "                        <td>&nbsp;Flip on X_axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Y</strong></td>\n"
#~ "                        <td>&nbsp;Flip on Y_axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>&#39;-&#39;</strong></"
#~ "td>\n"
#~ "                        <td>&nbsp;Zoom Out</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>&#39;=&#39;</strong></"
#~ "td>\n"
#~ "                        <td>&nbsp;Zoom In</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>CTRL+A</strong></td>\n"
#~ "                        <td>&nbsp;Select All</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>CTRL+C</strong></td>\n"
#~ "                        <td>&nbsp;Copy Obj</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>CTRL+E</strong></td>\n"
#~ "                        <td>&nbsp;Open Excellon File</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>CTRL+G</strong></td>\n"
#~ "                        <td>&nbsp;Open Gerber File</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>CTRL+N</strong></td>\n"
#~ "                        <td>&nbsp;New Project</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>CTRL+M</strong></td>\n"
#~ "                        <td>&nbsp;Measurement Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>CTRL+O</strong></td>\n"
#~ "                        <td>&nbsp;Open Project</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>CTRL+S</strong></td>\n"
#~ "                        <td>&nbsp;Save Project As</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>CTRL+F10</strong></td>\n"
#~ "                        <td>&nbsp;Toggle Plot Area</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>SHIFT+C</strong></td>\n"
#~ "                        <td>&nbsp;Copy Obj_Name</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>SHIFT+E</strong></td>\n"
#~ "                        <td>&nbsp;Toggle Code Editor</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>SHIFT+G</strong></td>\n"
#~ "                        <td>&nbsp;Toggle the axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>SHIFT+P</strong></td>\n"
#~ "                        <td>&nbsp;Open Preferences Window</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>SHIFT+R</strong></td>\n"
#~ "                        <td>&nbsp;Rotate by 90 degree CCW</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>SHIFT+S</strong></td>\n"
#~ "                        <td>&nbsp;Run a Script</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>SHIFT+W</strong></td>\n"
#~ "                        <td>&nbsp;Toggle the workspace</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>SHIFT+X</strong></td>\n"
#~ "                        <td>&nbsp;Skew on X axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>SHIFT+Y</strong></td>\n"
#~ "                        <td>&nbsp;Skew on Y axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+C</strong></td>\n"
#~ "                        <td>&nbsp;Calculators Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+D</strong></td>\n"
#~ "                        <td>&nbsp;2-Sided PCB Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+K</strong></td>\n"
#~ "                        <td>&nbsp;Solder Paste Dispensing Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+L</strong></td>\n"
#~ "                        <td>&nbsp;Film PCB Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+N</strong></td>\n"
#~ "                        <td>&nbsp;Non-Copper Clearing Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+P</strong></td>\n"
#~ "                        <td>&nbsp;Paint Area Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+Q</strong></td>\n"
#~ "                        <td>&nbsp;PDF Import Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+R</strong></td>\n"
#~ "                        <td>&nbsp;Transformations Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+S</strong></td>\n"
#~ "                        <td>&nbsp;View File Source</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+U</strong></td>\n"
#~ "                        <td>&nbsp;Cutout PCB Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+1</strong></td>\n"
#~ "                        <td>&nbsp;Enable all Plots</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+2</strong></td>\n"
#~ "                        <td>&nbsp;Disable all Plots</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+3</strong></td>\n"
#~ "                        <td>&nbsp;Disable Non-selected Plots</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+F10</strong></td>\n"
#~ "                        <td>&nbsp;Toggle Full Screen</td>\n"
#~ "                    </tr>                 \n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>CTRL+ALT+X</strong></"
#~ "td>\n"
#~ "                        <td>&nbsp;Abort current task (gracefully)</td>\n"
#~ "                    </tr>                    \n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>F1</strong></td>\n"
#~ "                        <td>&nbsp;Open Online Manual</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>F4</strong></td>\n"
#~ "                        <td>&nbsp;Open Online Tutorials</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Del</strong></td>\n"
#~ "                        <td>&nbsp;Delete Object</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Del</strong></td>\n"
#~ "                        <td>&nbsp;Alternate: Delete Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>'`'</strong></td>\n"
#~ "                        <td>&nbsp;(left to Key_1)Toogle Notebook Area "
#~ "(Left Side)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>SPACE</strong></td>\n"
#~ "                        <td>&nbsp;En(Dis)able Obj Plot</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Escape</strong></td>\n"
#~ "                        <td>&nbsp;Deselects all objects</td>\n"
#~ "                    </tr>\n"
#~ "                </tbody>\n"
#~ "            </table>\n"
#~ "    \n"
#~ "            "
#~ msgstr ""
#~ "<b>General Shortcut list</b><br>\n"
#~ "            <table border=\"0\" cellpadding=\"0\" cellspacing=\"0\" style="
#~ "\"width:283px\">\n"
#~ "                <tbody>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\" width=\"89\"><strong>F3</"
#~ "strong></td>\n"
#~ "                        <td width=\"194\"><span style=\"color:"
#~ "#006400\"><strong>&nbsp;SHOW SHORTCUT LIST</strong></span></td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>1</strong></td>\n"
#~ "                        <td>&nbsp;Switch to Project Tab</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>2</strong></td>\n"
#~ "                        <td>&nbsp;Switch to Selected Tab</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>3</strong></td>\n"
#~ "                        <td>&nbsp;Switch to Tool Tab</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>B</strong></td>\n"
#~ "                        <td>&nbsp;New Gerber</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>E</strong></td>\n"
#~ "                        <td>&nbsp;Edit Object (if selected)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>G</strong></td>\n"
#~ "                        <td>&nbsp;Grid On/Off</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>J</strong></td>\n"
#~ "                        <td>&nbsp;Jump to Coordinates</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>L</strong></td>\n"
#~ "                        <td>&nbsp;New Excellon</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>M</strong></td>\n"
#~ "                        <td>&nbsp;Move Obj</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>N</strong></td>\n"
#~ "                        <td>&nbsp;New Geometry</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>O</strong></td>\n"
#~ "                        <td>&nbsp;Set Origin</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Q</strong></td>\n"
#~ "                        <td>&nbsp;Change Units</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>P</strong></td>\n"
#~ "                        <td>&nbsp;Open Properties Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>R</strong></td>\n"
#~ "                        <td>&nbsp;Rotate by 90 degree CW</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>S</strong></td>\n"
#~ "                        <td>&nbsp;Shell Toggle</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>T</strong></td>\n"
#~ "                        <td>&nbsp;Add a Tool (when in Geometry Selected "
#~ "Tab or in Tools NCC or Tools Paint)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>V</strong></td>\n"
#~ "                        <td>&nbsp;Zoom Fit</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>X</strong></td>\n"
#~ "                        <td>&nbsp;Flip on X_axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Y</strong></td>\n"
#~ "                        <td>&nbsp;Flip on Y_axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>&#39;-&#39;</strong></"
#~ "td>\n"
#~ "                        <td>&nbsp;Zoom Out</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>&#39;=&#39;</strong></"
#~ "td>\n"
#~ "                        <td>&nbsp;Zoom In</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>CTRL+A</strong></td>\n"
#~ "                        <td>&nbsp;Select All</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>CTRL+C</strong></td>\n"
#~ "                        <td>&nbsp;Copy Obj</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>CTRL+E</strong></td>\n"
#~ "                        <td>&nbsp;Open Excellon File</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>CTRL+G</strong></td>\n"
#~ "                        <td>&nbsp;Open Gerber File</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>CTRL+N</strong></td>\n"
#~ "                        <td>&nbsp;New Project</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>CTRL+M</strong></td>\n"
#~ "                        <td>&nbsp;Measurement Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>CTRL+O</strong></td>\n"
#~ "                        <td>&nbsp;Open Project</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>CTRL+S</strong></td>\n"
#~ "                        <td>&nbsp;Save Project As</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>CTRL+F10</strong></td>\n"
#~ "                        <td>&nbsp;Toggle Plot Area</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>SHIFT+C</strong></td>\n"
#~ "                        <td>&nbsp;Copy Obj_Name</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>SHIFT+E</strong></td>\n"
#~ "                        <td>&nbsp;Toggle Code Editor</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>SHIFT+G</strong></td>\n"
#~ "                        <td>&nbsp;Toggle the axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>SHIFT+P</strong></td>\n"
#~ "                        <td>&nbsp;Open Preferences Window</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>SHIFT+R</strong></td>\n"
#~ "                        <td>&nbsp;Rotate by 90 degree CCW</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>SHIFT+S</strong></td>\n"
#~ "                        <td>&nbsp;Run a Script</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>SHIFT+W</strong></td>\n"
#~ "                        <td>&nbsp;Toggle the workspace</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>SHIFT+X</strong></td>\n"
#~ "                        <td>&nbsp;Skew on X axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>SHIFT+Y</strong></td>\n"
#~ "                        <td>&nbsp;Skew on Y axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+C</strong></td>\n"
#~ "                        <td>&nbsp;Calculators Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+D</strong></td>\n"
#~ "                        <td>&nbsp;2-Sided PCB Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+K</strong></td>\n"
#~ "                        <td>&nbsp;Solder Paste Dispensing Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+L</strong></td>\n"
#~ "                        <td>&nbsp;Film PCB Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+N</strong></td>\n"
#~ "                        <td>&nbsp;Non-Copper Clearing Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+P</strong></td>\n"
#~ "                        <td>&nbsp;Paint Area Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+Q</strong></td>\n"
#~ "                        <td>&nbsp;PDF Import Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+R</strong></td>\n"
#~ "                        <td>&nbsp;Transformations Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+S</strong></td>\n"
#~ "                        <td>&nbsp;View File Source</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+U</strong></td>\n"
#~ "                        <td>&nbsp;Cutout PCB Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+1</strong></td>\n"
#~ "                        <td>&nbsp;Enable all Plots</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+2</strong></td>\n"
#~ "                        <td>&nbsp;Disable all Plots</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+3</strong></td>\n"
#~ "                        <td>&nbsp;Disable Non-selected Plots</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+F10</strong></td>\n"
#~ "                        <td>&nbsp;Toggle Full Screen</td>\n"
#~ "                    </tr>                 \n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>CTRL+ALT+X</strong></"
#~ "td>\n"
#~ "                        <td>&nbsp;Abort current task (gracefully)</td>\n"
#~ "                    </tr>                    \n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>F1</strong></td>\n"
#~ "                        <td>&nbsp;Open Online Manual</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>F4</strong></td>\n"
#~ "                        <td>&nbsp;Open Online Tutorials</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Del</strong></td>\n"
#~ "                        <td>&nbsp;Delete Object</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Del</strong></td>\n"
#~ "                        <td>&nbsp;Alternate: Delete Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>'`'</strong></td>\n"
#~ "                        <td>&nbsp;(left to Key_1)Toogle Notebook Area "
#~ "(Left Side)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>SPACE</strong></td>\n"
#~ "                        <td>&nbsp;En(Dis)able Obj Plot</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Escape</strong></td>\n"
#~ "                        <td>&nbsp;Deselects all objects</td>\n"
#~ "                    </tr>\n"
#~ "                </tbody>\n"
#~ "            </table>\n"
#~ "    \n"
#~ "            "

#~ msgid ""
#~ "<b>Editor Shortcut list</b><br>\n"
#~ "            <br>\n"
#~ "            <strong><span style=\"color:#0000ff\">GEOMETRY EDITOR</span></"
#~ "strong><br>\n"
#~ "    \n"
#~ "            <table border=\"0\" cellpadding=\"0\" cellspacing=\"0\" style="
#~ "\"width:283px\">\n"
#~ "                <tbody>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\" width=\"89\"><strong>A</"
#~ "strong></td>\n"
#~ "                        <td width=\"194\">&nbsp;Draw an Arc</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>B</strong></td>\n"
#~ "                        <td>&nbsp;Buffer Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>C</strong></td>\n"
#~ "                        <td>&nbsp;Copy Geo Item</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>D</strong></td>\n"
#~ "                        <td>&nbsp;Within Add Arc will toogle the ARC "
#~ "direction: CW or CCW</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>E</strong></td>\n"
#~ "                        <td>&nbsp;Polygon Intersection Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>I</strong></td>\n"
#~ "                        <td>&nbsp;Paint Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>J</strong></td>\n"
#~ "                        <td>&nbsp;Jump to Location (x, y)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>K</strong></td>\n"
#~ "                        <td>&nbsp;Toggle Corner Snap</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>M</strong></td>\n"
#~ "                        <td>&nbsp;Move Geo Item</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>M</strong></td>\n"
#~ "                        <td>&nbsp;Within Add Arc will cycle through the "
#~ "ARC modes</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>N</strong></td>\n"
#~ "                        <td>&nbsp;Draw a Polygon</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>O</strong></td>\n"
#~ "                        <td>&nbsp;Draw a Circle</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>P</strong></td>\n"
#~ "                        <td>&nbsp;Draw a Path</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>R</strong></td>\n"
#~ "                        <td>&nbsp;Draw Rectangle</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>S</strong></td>\n"
#~ "                        <td>&nbsp;Polygon Substraction Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>T</strong></td>\n"
#~ "                        <td>&nbsp;Add Text Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>U</strong></td>\n"
#~ "                        <td>&nbsp;Polygon Union Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>X</strong></td>\n"
#~ "                        <td>&nbsp;Flip shape on X axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Y</strong></td>\n"
#~ "                        <td>&nbsp;Flip shape on Y axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>SHIFT+X</strong></td>\n"
#~ "                        <td>&nbsp;Skew shape on X axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>SHIFT+Y</strong></td>\n"
#~ "                        <td>&nbsp;Skew shape on Y axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+R</strong></td>\n"
#~ "                        <td>&nbsp;Editor Transformation Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+X</strong></td>\n"
#~ "                        <td>&nbsp;Offset shape on X axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+Y</strong></td>\n"
#~ "                        <td>&nbsp;Offset shape on Y axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>CTRL+M</strong></td>\n"
#~ "                        <td>&nbsp;Measurement Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>CTRL+S</strong></td>\n"
#~ "                        <td>&nbsp;Save Object and Exit Editor</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>CTRL+X</strong></td>\n"
#~ "                        <td>&nbsp;Polygon Cut Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Space</strong></td>\n"
#~ "                        <td>&nbsp;Rotate Geometry</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ENTER</strong></td>\n"
#~ "                        <td>&nbsp;Finish drawing for certain tools</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ESC</strong></td>\n"
#~ "                        <td>&nbsp;Abort and return to Select</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Del</strong></td>\n"
#~ "                        <td>&nbsp;Delete Shape</td>\n"
#~ "                    </tr>\n"
#~ "                </tbody>\n"
#~ "            </table>\n"
#~ "            <br>\n"
#~ "            <br>\n"
#~ "            <strong><span style=\"color:#ff0000\">EXCELLON EDITOR</span></"
#~ "strong><br>\n"
#~ "            <table border=\"0\" cellpadding=\"0\" cellspacing=\"0\" style="
#~ "\"width:283px\">\n"
#~ "                <tbody>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\" width=\"89\"><strong>A</"
#~ "strong></td>\n"
#~ "                        <td width=\"194\">&nbsp;Add Drill Array</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>C</strong></td>\n"
#~ "                        <td>&nbsp;Copy Drill(s)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>D</strong></td>\n"
#~ "                        <td>&nbsp;Add Drill</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>J</strong></td>\n"
#~ "                        <td>&nbsp;Jump to Location (x, y)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>M</strong></td>\n"
#~ "                        <td>&nbsp;Move Drill(s)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\" width=\"89\"><strong>Q</"
#~ "strong></td>\n"
#~ "                        <td width=\"194\">&nbsp;Add Slot Array</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>R</strong></td>\n"
#~ "                        <td>&nbsp;Resize Drill(s)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>T</strong></td>\n"
#~ "                        <td>&nbsp;Add a new Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\" width=\"89\"><strong>W</"
#~ "strong></td>\n"
#~ "                        <td width=\"194\">&nbsp;Add Slot</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Del</strong></td>\n"
#~ "                        <td>&nbsp;Delete Drill(s)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Del</strong></td>\n"
#~ "                        <td>&nbsp;Alternate: Delete Tool(s)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ESC</strong></td>\n"
#~ "                        <td>&nbsp;Abort and return to Select</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>CTRL+S</strong></td>\n"
#~ "                        <td>&nbsp;Save Object and Exit Editor</td>\n"
#~ "                    </tr>\n"
#~ "                </tbody>\n"
#~ "            </table>\n"
#~ "            <br>\n"
#~ "            <br>\n"
#~ "            <strong><span style=\"color:#00ff00\">GERBER EDITOR</span></"
#~ "strong><br>\n"
#~ "            <table border=\"0\" cellpadding=\"0\" cellspacing=\"0\" style="
#~ "\"width:283px\">\n"
#~ "                <tbody>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\" width=\"89\"><strong>A</"
#~ "strong></td>\n"
#~ "                        <td width=\"194\">&nbsp;Add Pad Array</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>B</strong></td>\n"
#~ "                        <td>&nbsp;Buffer</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>C</strong></td>\n"
#~ "                        <td>&nbsp;Copy</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>D</strong></td>\n"
#~ "                        <td>&nbsp;Add Disc</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>E</strong></td>\n"
#~ "                        <td>&nbsp;Add SemiDisc</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>J</strong></td>\n"
#~ "                        <td>&nbsp;Jump to Location (x, y)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>M</strong></td>\n"
#~ "                        <td>&nbsp;Move</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>N</strong></td>\n"
#~ "                        <td>&nbsp;Add Region</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>P</strong></td>\n"
#~ "                        <td>&nbsp;Add Pad</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>R</strong></td>\n"
#~ "                        <td>&nbsp;Within Track & Region Tools will cycle "
#~ "in REVERSE the bend modes</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>S</strong></td>\n"
#~ "                        <td>&nbsp;Scale</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>T</strong></td>\n"
#~ "                        <td>&nbsp;Add Track</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>T</strong></td>\n"
#~ "                        <td>&nbsp;Within Track & Region Tools will cycle "
#~ "FORWARD the bend modes</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Del</strong></td>\n"
#~ "                        <td>&nbsp;Delete</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Del</strong></td>\n"
#~ "                        <td>&nbsp;Alternate: Delete Apertures</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ESC</strong></td>\n"
#~ "                        <td>&nbsp;Abort and return to Select</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>CTRL+E</strong></td>\n"
#~ "                        <td>&nbsp;Eraser Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>CTRL+S</strong></td>\n"
#~ "                        <td>&nbsp;Save Object and Exit Editor</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                     <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+A</strong></td>\n"
#~ "                        <td>&nbsp;Mark Area Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+N</strong></td>\n"
#~ "                        <td>&nbsp;Poligonize Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+R</strong></td>\n"
#~ "                        <td>&nbsp;Transformation Tool</td>\n"
#~ "                    </tr>\n"
#~ "                </tbody>\n"
#~ "            </table>\n"
#~ "                    "
#~ msgstr ""
#~ "<b>Editor Shortcut list</b><br>\n"
#~ "            <br>\n"
#~ "            <strong><span style=\"color:#0000ff\">GEOMETRY EDITOR</span></"
#~ "strong><br>\n"
#~ "    \n"
#~ "            <table border=\"0\" cellpadding=\"0\" cellspacing=\"0\" style="
#~ "\"width:283px\">\n"
#~ "                <tbody>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\" width=\"89\"><strong>A</"
#~ "strong></td>\n"
#~ "                        <td width=\"194\">&nbsp;Draw an Arc</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>B</strong></td>\n"
#~ "                        <td>&nbsp;Buffer Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>C</strong></td>\n"
#~ "                        <td>&nbsp;Copy Geo Item</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>D</strong></td>\n"
#~ "                        <td>&nbsp;Within Add Arc will toogle the ARC "
#~ "direction: CW or CCW</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>E</strong></td>\n"
#~ "                        <td>&nbsp;Polygon Intersection Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>I</strong></td>\n"
#~ "                        <td>&nbsp;Paint Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>J</strong></td>\n"
#~ "                        <td>&nbsp;Jump to Location (x, y)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>K</strong></td>\n"
#~ "                        <td>&nbsp;Toggle Corner Snap</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>M</strong></td>\n"
#~ "                        <td>&nbsp;Move Geo Item</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>M</strong></td>\n"
#~ "                        <td>&nbsp;Within Add Arc will cycle through the "
#~ "ARC modes</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>N</strong></td>\n"
#~ "                        <td>&nbsp;Draw a Polygon</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>O</strong></td>\n"
#~ "                        <td>&nbsp;Draw a Circle</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>P</strong></td>\n"
#~ "                        <td>&nbsp;Draw a Path</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>R</strong></td>\n"
#~ "                        <td>&nbsp;Draw Rectangle</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>S</strong></td>\n"
#~ "                        <td>&nbsp;Polygon Substraction Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>T</strong></td>\n"
#~ "                        <td>&nbsp;Add Text Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>U</strong></td>\n"
#~ "                        <td>&nbsp;Polygon Union Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>X</strong></td>\n"
#~ "                        <td>&nbsp;Flip shape on X axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Y</strong></td>\n"
#~ "                        <td>&nbsp;Flip shape on Y axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>SHIFT+X</strong></td>\n"
#~ "                        <td>&nbsp;Skew shape on X axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>SHIFT+Y</strong></td>\n"
#~ "                        <td>&nbsp;Skew shape on Y axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+R</strong></td>\n"
#~ "                        <td>&nbsp;Editor Transformation Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+X</strong></td>\n"
#~ "                        <td>&nbsp;Offset shape on X axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+Y</strong></td>\n"
#~ "                        <td>&nbsp;Offset shape on Y axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>CTRL+M</strong></td>\n"
#~ "                        <td>&nbsp;Measurement Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>CTRL+S</strong></td>\n"
#~ "                        <td>&nbsp;Save Object and Exit Editor</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>CTRL+X</strong></td>\n"
#~ "                        <td>&nbsp;Polygon Cut Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Space</strong></td>\n"
#~ "                        <td>&nbsp;Rotate Geometry</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ENTER</strong></td>\n"
#~ "                        <td>&nbsp;Finish drawing for certain tools</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ESC</strong></td>\n"
#~ "                        <td>&nbsp;Abort and return to Select</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Del</strong></td>\n"
#~ "                        <td>&nbsp;Delete Shape</td>\n"
#~ "                    </tr>\n"
#~ "                </tbody>\n"
#~ "            </table>\n"
#~ "            <br>\n"
#~ "            <br>\n"
#~ "            <strong><span style=\"color:#ff0000\">EXCELLON EDITOR</span></"
#~ "strong><br>\n"
#~ "            <table border=\"0\" cellpadding=\"0\" cellspacing=\"0\" style="
#~ "\"width:283px\">\n"
#~ "                <tbody>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\" width=\"89\"><strong>A</"
#~ "strong></td>\n"
#~ "                        <td width=\"194\">&nbsp;Add Drill Array</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>C</strong></td>\n"
#~ "                        <td>&nbsp;Copy Drill(s)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>D</strong></td>\n"
#~ "                        <td>&nbsp;Add Drill</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>J</strong></td>\n"
#~ "                        <td>&nbsp;Jump to Location (x, y)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>M</strong></td>\n"
#~ "                        <td>&nbsp;Move Drill(s)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\" width=\"89\"><strong>Q</"
#~ "strong></td>\n"
#~ "                        <td width=\"194\">&nbsp;Add Slot Array</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>R</strong></td>\n"
#~ "                        <td>&nbsp;Resize Drill(s)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>T</strong></td>\n"
#~ "                        <td>&nbsp;Add a new Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\" width=\"89\"><strong>W</"
#~ "strong></td>\n"
#~ "                        <td width=\"194\">&nbsp;Add Slot</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Del</strong></td>\n"
#~ "                        <td>&nbsp;Delete Drill(s)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Del</strong></td>\n"
#~ "                        <td>&nbsp;Alternate: Delete Tool(s)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ESC</strong></td>\n"
#~ "                        <td>&nbsp;Abort and return to Select</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>CTRL+S</strong></td>\n"
#~ "                        <td>&nbsp;Save Object and Exit Editor</td>\n"
#~ "                    </tr>\n"
#~ "                </tbody>\n"
#~ "            </table>\n"
#~ "            <br>\n"
#~ "            <br>\n"
#~ "            <strong><span style=\"color:#00ff00\">GERBER EDITOR</span></"
#~ "strong><br>\n"
#~ "            <table border=\"0\" cellpadding=\"0\" cellspacing=\"0\" style="
#~ "\"width:283px\">\n"
#~ "                <tbody>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\" width=\"89\"><strong>A</"
#~ "strong></td>\n"
#~ "                        <td width=\"194\">&nbsp;Add Pad Array</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>B</strong></td>\n"
#~ "                        <td>&nbsp;Buffer</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>C</strong></td>\n"
#~ "                        <td>&nbsp;Copy</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>D</strong></td>\n"
#~ "                        <td>&nbsp;Add Disc</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>E</strong></td>\n"
#~ "                        <td>&nbsp;Add SemiDisc</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>J</strong></td>\n"
#~ "                        <td>&nbsp;Jump to Location (x, y)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>M</strong></td>\n"
#~ "                        <td>&nbsp;Move</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>N</strong></td>\n"
#~ "                        <td>&nbsp;Add Region</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>P</strong></td>\n"
#~ "                        <td>&nbsp;Add Pad</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>R</strong></td>\n"
#~ "                        <td>&nbsp;Within Track & Region Tools will cycle "
#~ "in REVERSE the bend modes</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>S</strong></td>\n"
#~ "                        <td>&nbsp;Scale</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>T</strong></td>\n"
#~ "                        <td>&nbsp;Add Track</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>T</strong></td>\n"
#~ "                        <td>&nbsp;Within Track & Region Tools will cycle "
#~ "FORWARD the bend modes</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Del</strong></td>\n"
#~ "                        <td>&nbsp;Delete</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Del</strong></td>\n"
#~ "                        <td>&nbsp;Alternate: Delete Apertures</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ESC</strong></td>\n"
#~ "                        <td>&nbsp;Abort and return to Select</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>CTRL+E</strong></td>\n"
#~ "                        <td>&nbsp;Eraser Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>CTRL+S</strong></td>\n"
#~ "                        <td>&nbsp;Save Object and Exit Editor</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                     <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+A</strong></td>\n"
#~ "                        <td>&nbsp;Mark Area Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+N</strong></td>\n"
#~ "                        <td>&nbsp;Poligonize Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+R</strong></td>\n"
#~ "                        <td>&nbsp;Transformation Tool</td>\n"
#~ "                    </tr>\n"
#~ "                </tbody>\n"
#~ "            </table>\n"
#~ "                    "

#~ msgid "[success] Done."
#~ msgstr "[success] Done."

#~ msgid "[WARNING_NOTCL] Cancelled."
#~ msgstr "[WARNING_NOTCL] Cancelled."

#~ msgid "[success] Added new tool with dia: {dia} {units}"
#~ msgstr "[success] Added new tool with dia: {dia} {units}"

#~ msgid "[WARNING_NOTCL] Application is saving the project. Please wait ..."
#~ msgstr "[WARNING_NOTCL] Application is saving the project. Please wait ..."

#~ msgid "<b>%s:</b>"
#~ msgstr "<b>%s:</b>"

#~ msgid "%s:"
#~ msgstr "%s:"

#~| msgid "[ERROR_NOTCL] Object not found: %s"
#~ msgid "Object not found: %s"
#~ msgstr "Object not found: %s"

#~ msgid "[success] Opened: %s"
#~ msgstr "[success] Opened: %s"

#~ msgid "[success] Paint All Done."
#~ msgstr "[success] Paint All Done."

#~| msgid ""
#~| "[ERROR] Could not do Paint All. Try a different combination of "
#~| "parameters. Or a different Method of paint\n"
#~| "%s"
#~ msgid ""
#~ "Could not do Paint All. Try a different combination of parameters. Or a "
#~ "different Method of paint\n"
#~ "%s"
#~ msgstr ""
#~ "Could not do Paint All. Try a different combination of parameters. Or a "
#~ "different Method of paint\n"
#~ "%s"

#~| msgid "[success] Paint All Done."
#~ msgid "[success] Paint Area Done."
#~ msgstr "[success] Paint Area Done."

#~ msgid "Generating panel ... Please wait."
#~ msgstr "Generating panel ... Please wait."

#~ msgid "...proccessing... [%s]"
#~ msgstr "...proccessing... [%s]"

#~ msgid "Parsing aperture %s geometry ..."
#~ msgstr "Parsing aperture %s geometry ..."

#~ msgid "[success] Skew on the %s axis done ..."
#~ msgstr "[success] Skew on the %s axis done ..."

#~ msgid "[ERROR_NOTCL] Could not load defaults file."
#~ msgstr "[ERROR_NOTCL] Could not load defaults file."

#~ msgid "[ERROR_NOTCL] Failed to parse defaults file."
#~ msgstr "[ERROR_NOTCL] Failed to parse defaults file."

#~ msgid "[ERROR_NOTCL] An internal error has ocurred. See shell.\n"
#~ msgstr "[ERROR_NOTCL] An internal error has ocurred. See shell.\n"

#~ msgid "[success] Defaults saved."
#~ msgstr "[success] Defaults saved."

#~ msgid "[success] Converted units to %s"
#~ msgstr "[success] Converted units to %s"

#~ msgid "[WARNING_NOTCL] Export Code cancelled."
#~ msgstr "[WARNING_NOTCL] Export Code cancelled."

#~ msgid "[success] Origin set ..."
#~ msgstr "[success] Origin set ..."

#~ msgid "[success] Skew on X axis done."
#~ msgstr "[success] Skew on X axis done."

#~ msgid "[success] Skew on Y axis done."
#~ msgstr "[success] Skew on Y axis done."

#~ msgid "[success] New Grid added ..."
#~ msgstr "[success] New Grid added ..."

#~ msgid "[WARNING_NOTCL] Open Gerber cancelled."
#~ msgstr "[WARNING_NOTCL] Open Gerber cancelled."

#~ msgid "[WARNING_NOTCL] Open G-Code cancelled."
#~ msgstr "[WARNING_NOTCL] Open G-Code cancelled."

#~ msgid "[WARNING_NOTCL] Open Project cancelled."
#~ msgstr "[WARNING_NOTCL] Open Project cancelled."

#~ msgid "[WARNING_NOTCL] Open Config cancelled."
#~ msgstr "[WARNING_NOTCL] Open Config cancelled."

#~ msgid "[WARNING_NOTCL] No object selected."
#~ msgstr "[WARNING_NOTCL] No object selected."

#~ msgid "[WARNING_NOTCL] Export SVG cancelled."
#~ msgstr "[WARNING_NOTCL] Export SVG cancelled."

#~ msgid "[WARNING_NOTCL] Export Excellon cancelled."
#~ msgstr "[WARNING_NOTCL] Export Excellon cancelled."

#~ msgid "[WARNING_NOTCL] Export Gerber cancelled."
#~ msgstr "[WARNING_NOTCL] Export Gerber cancelled."

#~ msgid "[WARNING_NOTCL] Export DXF cancelled."
#~ msgstr "[WARNING_NOTCL] Export DXF cancelled."

#~ msgid "[WARNING_NOTCL] Open SVG cancelled."
#~ msgstr "[WARNING_NOTCL] Open SVG cancelled."

#~ msgid "[WARNING_NOTCL] Open DXF cancelled."
#~ msgstr "[WARNING_NOTCL] Open DXF cancelled."

#~ msgid "[WARNING_NOTCL] No object Box. Using instead %s"
#~ msgstr "[WARNING_NOTCL] No object Box. Using instead %s"

#~ msgid "[ERROR_NOTCL] Failed to parse file: {name}. {error}"
#~ msgstr "[ERROR_NOTCL] Failed to parse file: {name}. {error}"

#~ msgid "[ERROR_NOTCL] An internal error has occurred. See shell.\n"
#~ msgstr "[ERROR_NOTCL] An internal error has occurred. See shell.\n"

#~ msgid "[ERROR_NOTCL] Failed to verify project file: %s. Retry to save it."
#~ msgstr "[ERROR_NOTCL] Failed to verify project file: %s. Retry to save it."

#~ msgid ""
#~ "[ERROR_NOTCL] Failed to parse saved project file: %s. Retry to save it."
#~ msgstr ""
#~ "[ERROR_NOTCL] Failed to parse saved project file: %s. Retry to save it."

#~ msgid "[ERROR_NOTCL] Failed to save project file: %s. Retry to save it."
#~ msgstr "[ERROR_NOTCL] Failed to save project file: %s. Retry to save it."

#~ msgid "[ERROR_NOTCL] Wrong value format entered, use a number."
#~ msgstr "[ERROR_NOTCL] Wrong value format entered, use a number."

#~ msgid "[ERROR_NOTCL] Cancelled. Empty file, it has no geometry..."
#~ msgstr "[ERROR_NOTCL] Cancelled. Empty file, it has no geometry..."

#~ msgid "[WARNING_NOTCL] Export Machine Code cancelled ..."
#~ msgstr "[WARNING_NOTCL] Export Machine Code cancelled ..."

#~ msgid "[WARNING_NOTCL] No such file or directory"
#~ msgstr "[WARNING_NOTCL] No such file or directory"

#~ msgid "[ERROR_NOTCL] The value is mistyped. Check the value. %s"
#~ msgstr "[ERROR_NOTCL] The value is mistyped. Check the value. %s"

#~ msgid "[ERROR_NOTCL] Cancelled."
#~ msgstr "[ERROR_NOTCL] Cancelled."

#~ msgid "Tool Dia:"
#~ msgstr "Tool Dia:"

#~ msgid "Nr of drills:"
#~ msgstr "Nr of drills:"

#~ msgid "Direction:"
#~ msgstr "Direction:"

#~ msgid "Pitch:"
#~ msgstr "Pitch:"

#~ msgid "Length:"
#~ msgstr "Length:"

#~ msgid "Nr of slots:"
#~ msgstr "Nr of slots:"

#~ msgid "[success] Deleted tool with dia: {del_dia} {units}"
#~ msgstr "[success] Deleted tool with dia: {del_dia} {units}"

#~ msgid "Tool dia:"
#~ msgstr "Tool dia:"

#~ msgid "Overlap Rate:"
#~ msgstr "Overlap Rate:"

#~ msgid "Method:"
#~ msgstr "Method:"

#~ msgid "[ERROR_NOTCL] Wrong value format entered for Rotate, use a number."
#~ msgstr "[ERROR_NOTCL] Wrong value format entered for Rotate, use a number."

#~ msgid "[ERROR_NOTCL] Wrong value format entered for Skew X, use a number."
#~ msgstr "[ERROR_NOTCL] Wrong value format entered for Skew X, use a number."

#~ msgid "[ERROR_NOTCL] Wrong value format entered for Skew Y, use a number."
#~ msgstr "[ERROR_NOTCL] Wrong value format entered for Skew Y, use a number."

#~ msgid "[ERROR_NOTCL] Wrong value format entered for Scale X, use a number."
#~ msgstr "[ERROR_NOTCL] Wrong value format entered for Scale X, use a number."

#~ msgid "[ERROR_NOTCL] Wrong value format entered for Scale Y, use a number."
#~ msgstr "[ERROR_NOTCL] Wrong value format entered for Scale Y, use a number."

#~ msgid "[ERROR_NOTCL] Wrong value format entered for Offset X, use a number."
#~ msgstr ""
#~ "[ERROR_NOTCL] Wrong value format entered for Offset X, use a number."

#~ msgid "[ERROR_NOTCL] Wrong value format entered for Offset Y, use a number."
#~ msgstr ""
#~ "[ERROR_NOTCL] Wrong value format entered for Offset Y, use a number."

#~ msgid "[success] Flip on the Y axis done ..."
#~ msgstr "[success] Flip on the Y axis done ..."

#~ msgid "[success] Flip on the X axis done ..."
#~ msgstr "[success] Flip on the X axis done ..."

#~ msgid "[success] Offset on the %s axis done ..."
#~ msgstr "[success] Offset on the %s axis done ..."

#~ msgid ""
#~ "[WARNING_NOTCL] Editing MultiGeo Geometry, tool: {tool} with diameter: "
#~ "{dia}"
#~ msgstr ""
#~ "[WARNING_NOTCL] Editing MultiGeo Geometry, tool: {tool} with diameter: "
#~ "{dia}"

#~ msgid "Clear GUI Settings:"
#~ msgstr "Clear GUI Settings:"

#~ msgid "Duration:"
#~ msgstr "Duration:"

#~ msgid "Fast Plunge:"
#~ msgstr "Fast Plunge:"

#~ msgid "Linear Dir.:"
#~ msgstr "Linear Dir.:"

#~ msgid "Plot kind:"
#~ msgstr "Plot kind:"

#~ msgid ""
#~ "Select from the Tools Table above\n"
#~ "the tools you want to include."
#~ msgstr ""
#~ "Select from the Tools Table above\n"
#~ "the tools you want to include."

#~ msgid ""
#~ "[WARNING_NOTCL] Tool Diameter is zero value. Change it to a positive real "
#~ "number."
#~ msgstr ""
#~ "[WARNING_NOTCL] Tool Diameter is zero value. Change it to a positive real "
#~ "number."

#~ msgid "[success] Gerber %s was mirrored..."
#~ msgstr "[success] Gerber %s was mirrored..."

#~ msgid "[success] Excellon %s was mirrored..."
#~ msgstr "[success] Excellon %s was mirrored..."

#~ msgid "[success] Geometry %s was mirrored..."
#~ msgstr "[success] Geometry %s was mirrored..."

#~ msgid "[WARNING_NOTCL] No object(s) selected."
#~ msgstr "[WARNING_NOTCL] No object(s) selected."

#~ msgid "[success] %s object was moved ..."
#~ msgstr "[success] %s object was moved ..."

#~ msgid "[WARNING_NOTCL] Object(s) not selected"
#~ msgstr "[WARNING_NOTCL] Object(s) not selected"

#~ msgid "[WARNING_NOTCL] Buffering ..."
#~ msgstr "[WARNING_NOTCL] Buffering ..."

#~ msgid "[success] Non-Copper Clearing with ToolDia = %s started."
#~ msgstr "[success] Non-Copper Clearing with ToolDia = %s started."

#~ msgid "[ERROR_NOTCL] NCCTool.clear_non_copper() --> %s"
#~ msgstr "[ERROR_NOTCL] NCCTool.clear_non_copper() --> %s"

#~ msgid "[success] NCC Tool finished."
#~ msgstr "[success] NCC Tool finished."

#~ msgid ""
#~ "[WARNING_NOTCL] NCC Tool finished but some PCB features could not be "
#~ "cleared. Check the result."
#~ msgstr ""
#~ "[WARNING_NOTCL] NCC Tool finished but some PCB features could not be "
#~ "cleared. Check the result."

#~ msgid "[success] Non-Copper Rest Clearing with ToolDia = %s started."
#~ msgstr "[success] Non-Copper Rest Clearing with ToolDia = %s started."

#~ msgid "[ERROR_NOTCL] NCCTool.clear_non_copper_rest() --> %s"
#~ msgstr "[ERROR_NOTCL] NCCTool.clear_non_copper_rest() --> %s"

#~ msgid ""
#~ "[ERROR_NOTCL] NCC Tool finished but could not clear the object with "
#~ "current settings."
#~ msgstr ""
#~ "[ERROR_NOTCL] NCC Tool finished but could not clear the object with "
#~ "current settings."

#~ msgid "[WARNING_NOTCL] Open PDF cancelled."
#~ msgstr "[WARNING_NOTCL] Open PDF cancelled."

#~ msgid "[ERROR_NOTCL] Open PDF file failed."
#~ msgstr "[ERROR_NOTCL] Open PDF file failed."

#~ msgid "[success] Rendered: %s"
#~ msgstr "[success] Rendered: %s"

#~ msgid ""
#~ "How to select the polygons to paint.<BR>Options:<BR>- <B>Single Polygons</"
#~ "B>: left mouse click on the polygon to be painted.<BR>- <B>Area "
#~ "Selection</B>: left mouse click to start selection of the area to be "
#~ "painted.<BR>- <B>All Polygons</B>: paint all polygons.<BR>- <B>Reference "
#~ "Object</B>: paint an area described by an external reference object."
#~ msgstr ""
#~ "How to select the polygons to paint.<BR>Options:<BR>- <B>Single Polygons</"
#~ "B>: left mouse click on the polygon to be painted.<BR>- <B>Area "
#~ "Selection</B>: left mouse click to start selection of the area to be "
#~ "painted.<BR>- <B>All Polygons</B>: paint all polygons.<BR>- <B>Reference "
#~ "Object</B>: paint an area described by an external reference object."

#~ msgid ""
#~ "[ERROR_NOTCL] There is no Painting Geometry in the file.\n"
#~ "Usually it means that the tool diameter is too big for the painted "
#~ "geometry.\n"
#~ "Change the painting parameters and try again."
#~ msgstr ""
#~ "[ERROR_NOTCL] There is no Painting Geometry in the file.\n"
#~ "Usually it means that the tool diameter is too big for the painted "
#~ "geometry.\n"
#~ "Change the painting parameters and try again."

#~ msgid "[WARNING_NOTCL]No object Box. Using instead %s"
#~ msgstr "[WARNING_NOTCL]No object Box. Using instead %s"

#~ msgid "[success] Imported: %s"
#~ msgstr "[success] Imported: %s"

#~ msgid "[ERROR_NOTCL] Generating new object failed."
#~ msgstr "[ERROR_NOTCL] Generating new object failed."

#~ msgid "[success] Created: %s"
#~ msgstr "[success] Created: %s"

#~ msgid "[success] Rotate done ..."
#~ msgstr "[success] Rotate done ..."

#~ msgid ""
#~ "When choosing the 'Itself' option the non copper clearing extent\n"
#~ "is based on the object that is copper cleared.\n"
#~ " Choosing the 'Box' option will do non copper clearing within the box\n"
#~ "specified by another object different than the one that is copper cleared."
#~ msgstr ""
#~ "When choosing the 'Itself' option the non copper clearing extent\n"
#~ "is based on the object that is copper cleared.\n"
#~ " Choosing the 'Box' option will do non copper clearing within the box\n"
#~ "specified by another object different than the one that is copper cleared."

#~ msgid ""
#~ "How to select the polygons to paint.<BR>Options:<BR>- <B>Single</B>: left "
#~ "mouse click on the polygon to be painted.<BR>- <B>Area</B>: left mouse "
#~ "click to start selection of the area to be painted.<BR>- <B>All</B>: "
#~ "paint all polygons.<BR>- <B>Ref</B>: paint an area described by an "
#~ "external reference object."
#~ msgstr ""
#~ "How to select the polygons to paint.<BR>Options:<BR>- <B>Single</B>: left "
#~ "mouse click on the polygon to be painted.<BR>- <B>Area</B>: left mouse "
#~ "click to start selection of the area to be painted.<BR>- <B>All</B>: "
#~ "paint all polygons.<BR>- <B>Ref</B>: paint an area described by an "
#~ "external reference object."

#~ msgid "Geometry object to be painted.                        "
#~ msgstr "Geometry object to be painted.                        "

#~ msgid ""
#~ "After clicking here, click inside<BR>the polygon you wish to be painted "
#~ "if <B>Single</B> is selected.<BR>If <B>Area</B> is selected, then the "
#~ "selection of the area to be painted<BR>will be initiated by a first click "
#~ "and finished by the second mouse click.<BR>If <B>All</B>  is selected "
#~ "then the Paint will start after click.<BR>If <B>Ref</B>  is selected then "
#~ "the Paint will start after click,<BR>and the painted area will be "
#~ "described by a selected object.<BR>A new Geometry object with the tool "
#~ "paths will be created."
#~ msgstr ""
#~ "After clicking here, click inside<BR>the polygon you wish to be painted "
#~ "if <B>Single</B> is selected.<BR>If <B>Area</B> is selected, then the "
#~ "selection of the area to be painted<BR>will be initiated by a first click "
#~ "and finished by the second mouse click.<BR>If <B>All</B>  is selected "
#~ "then the Paint will start after click.<BR>If <B>Ref</B>  is selected then "
#~ "the Paint will start after click,<BR>and the painted area will be "
#~ "described by a selected object.<BR>A new Geometry object with the tool "
#~ "paths will be created."

#~ msgid "<b>Apertures:</b>"
#~ msgstr "<b>Apertures:</b>"

#~ msgid "Aperture Code:"
#~ msgstr "Aperture Code:"

#~ msgid "<b>Languages:</b>"
#~ msgstr "<b>Languages:</b>"

#~ msgid "Width (# passes):"
#~ msgstr "Width (# passes):"

#~| msgid "<b>Clear non-copper:</b>"
#~ msgid "Clear non-copper"
#~ msgstr "Clear non-copper"

#~ msgid "Rounded corners"
#~ msgstr "Rounded corners"

#~ msgid ""
#~ "Creates a Geometry objects with polygons\n"
#~ "covering the copper-free areas of the PCB."
#~ msgstr ""
#~ "Creates a Geometry objects with polygons\n"
#~ "covering the copper-free areas of the PCB."

#~ msgid "<b>Bounding Box:</b>"
#~ msgstr "<b>Bounding Box:</b>"

#~ msgid "<b>Units</b>:"
#~ msgstr "<b>Units</b>:"

#~ msgid "<b>Zeros</b>:"
#~ msgstr "<b>Zeros</b>:"

#~ msgid "INCH:"
#~ msgstr "INCH:"

#~ msgid "Tool change:"
#~ msgstr "Tool change:"

#~ msgid "Toolchange Z position."
#~ msgstr "Toolchange Z position."

#~ msgid "Feedrate:"
#~ msgstr "Feedrate:"

#~ msgid ""
#~ "Tool speed while drilling\n"
#~ "(in units per minute)."
#~ msgstr ""
#~ "Tool speed while drilling\n"
#~ "(in units per minute)."

#~ msgid "<b>Gcode:    </b>"
#~ msgstr "<b>Gcode:    </b>"

#~ msgid "Offset Z:"
#~ msgstr "Offset Z:"

#~ msgid "<b>Slots:</b>"
#~ msgstr "<b>Slots:</b>"

#~ msgid "<b>Create CNC Job:</b>"
#~ msgstr "<b>Create CNC Job:</b>"

#~ msgid "Multidepth"
#~ msgstr "Multidepth"

#~ msgid "Multidepth usage: True or False."
#~ msgstr "Multidepth usage: True or False."

#~ msgid ""
#~ "The postprocessor file that dictates\n"
#~ "Machine Code output."
#~ msgstr ""
#~ "The postprocessor file that dictates\n"
#~ "Machine Code output."

#~ msgid "Display Annotation:"
#~ msgstr "Display Annotation:"

#~ msgid ""
#~ "Type here any G-Code commands you would\n"
#~ "like to be executed when Toolchange event is encountered.\n"
#~ "This will constitute a Custom Toolchange GCode,\n"
#~ "or a Toolchange Macro."
#~ msgstr ""
#~ "Type here any G-Code commands you would\n"
#~ "like to be executed when Toolchange event is encountered.\n"
#~ "This will constitute a Custom Toolchange GCode,\n"
#~ "or a Toolchange Macro."

#~ msgid ""
#~ "If checked, use 'rest machining'.\n"
#~ "Basically it will clear copper outside PCB features,\n"
#~ "using the biggest tool and continue with the next tools,\n"
#~ "from bigger to smaller, to clear areas of copper that\n"
#~ "could not be cleared by previous tool.\n"
#~ "If not checked, use the standard algorithm."
#~ msgstr ""
#~ "If checked, use 'rest machining'.\n"
#~ "Basically it will clear copper outside PCB features,\n"
#~ "using the biggest tool and continue with the next tools,\n"
#~ "from bigger to smaller, to clear areas of copper that\n"
#~ "could not be cleared by previous tool.\n"
#~ "If not checked, use the standard algorithm."

#~ msgid "Offset:"
#~ msgstr "Offset:"

#~ msgid ""
#~ "Distance from objects at which\n"
#~ "to draw the cutout."
#~ msgstr ""
#~ "Distance from objects at which\n"
#~ "to draw the cutout."

#~ msgid ""
#~ "Size of the gaps in the toolpath\n"
#~ "that will remain to hold the\n"
#~ "board in place."
#~ msgstr ""
#~ "Size of the gaps in the toolpath\n"
#~ "that will remain to hold the\n"
#~ "board in place."

#~ msgid "Create a convex shape surrounding the entire PCB."
#~ msgstr "Create a convex shape surrounding the entire PCB."

#~ msgid ""
#~ "The axis should pass through a <b>point</b> or cut\n"
#~ " a specified <b>box</b> (in a Geometry object) in \n"
#~ "the middle."
#~ msgstr ""
#~ "The axis should pass through a <b>point</b> or cut\n"
#~ " a specified <b>box</b> (in a Geometry object) in \n"
#~ "the middle."

#~ msgid ""
#~ "How much (fraction) of the tool\n"
#~ "width to overlap each tool pass."
#~ msgstr ""
#~ "How much (fraction) of the tool\n"
#~ "width to overlap each tool pass."

#~ msgid "Panel Type:"
#~ msgstr "Panel Type:"

#~ msgid "Tip angle:"
#~ msgstr "Tip angle:"

#~ msgid "Angle for rotation. In degrees."
#~ msgstr "Angle for rotation. In degrees."

#~ msgid "Angle for Skew/Shear on X axis. In degrees."
#~ msgstr "Angle for Skew/Shear on X axis. In degrees."

#~ msgid "Angle for Skew/Shear on Y axis. In degrees."
#~ msgstr "Angle for Skew/Shear on Y axis. In degrees."

#~ msgid "XY Toolchange:"
#~ msgstr "XY Toolchange:"

#~ msgid "PostProcessors:"
#~ msgstr "PostProcessors:"

#~ msgid "<b>Scale:</b>"
#~ msgstr "<b>Scale:</b>"

#~ msgid "<b>Offset:</b>"
#~ msgstr "<b>Offset:</b>"

#~ msgid "Combine"
#~ msgstr "Combine"

#~ msgid "<b>Tools Table</b>"
#~ msgstr "<b>Tools Table</b>"

#~ msgid ""
#~ "Tool height just before starting the work.\n"
#~ "Delete the value if you don't need this feature."
#~ msgstr ""
#~ "Tool height just before starting the work.\n"
#~ "Delete the value if you don't need this feature."

#~ msgid ""
#~ "Z-axis position (height) for\n"
#~ "the last move."
#~ msgstr ""
#~ "Z-axis position (height) for\n"
#~ "the last move."

#~ msgid ""
#~ "The json file that dictates\n"
#~ "gcode output."
#~ msgstr ""
#~ "The json file that dictates\n"
#~ "gcode output."

#~ msgid "<b>Type:    </b>"
#~ msgstr "<b>Type:    </b>"

#~ msgid "Drills Tool dia:"
#~ msgstr "Drills Tool dia:"

#~ msgid "Slots Tool dia:"
#~ msgstr "Slots Tool dia:"

#~ msgid "<b>Tool Dia:</b>"
#~ msgstr "<b>Tool Dia:</b>"

#~ msgid "<b>Tool Data</b>"
#~ msgstr "<b>Tool Data</b>"

#~ msgid ""
#~ "This is the height (Z) at which the CNC\n"
#~ "will go as the last move."
#~ msgstr ""
#~ "This is the height (Z) at which the CNC\n"
#~ "will go as the last move."

#~ msgid "Feed Rate Z (Plunge):"
#~ msgstr "Feed Rate Z (Plunge):"

#~ msgid ""
#~ "Cutting speed in the Z\n"
#~ "plane in units per minute"
#~ msgstr ""
#~ "Cutting speed in the Z\n"
#~ "plane in units per minute"

#~ msgid ""
#~ "Cutting speed in the XY\n"
#~ "plane in units per minute\n"
#~ "(in units per minute).\n"
#~ "This is for the rapid move G00.\n"
#~ "It is useful only for Marlin,\n"
#~ "ignore for any other cases."
#~ msgstr ""
#~ "Cutting speed in the XY\n"
#~ "plane in units per minute\n"
#~ "(in units per minute).\n"
#~ "This is for the rapid move G00.\n"
#~ "It is useful only for Marlin,\n"
#~ "ignore for any other cases."

#~ msgid "Cut over 1st pt"
#~ msgstr "Cut over 1st pt"

#~ msgid "<b>Paint Area:</b>"
#~ msgstr "<b>Paint Area:</b>"

#~ msgid "<b>CNC Tools Table</b>"
#~ msgstr "<b>CNC Tools Table</b>"

#~ msgid ""
#~ "Type here any G-Code commands you would\n"
#~ "like to add to the beginning of the generated file."
#~ msgstr ""
#~ "Type here any G-Code commands you would\n"
#~ "like to add to the beginning of the generated file."

#~ msgid ""
#~ "This is the diameter of the tool tip.\n"
#~ "The manufacturer specifies it."
#~ msgstr ""
#~ "This is the diameter of the tool tip.\n"
#~ "The manufacturer specifies it."

#~ msgid "Object:"
#~ msgstr "Object:"

#~ msgid "Units:"
#~ msgstr "Units:"

#~ msgid ""
#~ "- 'Itself': the non copper clearing extent\n"
#~ "is based on the object that is copper cleared.\n"
#~ " - 'Box': will do non copper clearing within the box\n"
#~ "specified by the object selected in the Ref. Object combobox."
#~ msgstr ""
#~ "- 'Itself': the non copper clearing extent\n"
#~ "is based on the object that is copper cleared.\n"
#~ " - 'Box': will do non copper clearing within the box\n"
#~ "specified by the object selected in the Ref. Object combobox."

#~ msgid "Geometry:"
#~ msgstr "Geometry:"

#~ msgid ""
#~ "Scale the selected object(s)\n"
#~ "using the Scale Factor X for both axis."
#~ msgstr ""
#~ "Scale the selected object(s)\n"
#~ "using the Scale Factor X for both axis."

#~ msgid "<b>Excellon Format:</b>"
#~ msgstr "<b>Excellon Format:</b>"

#~ msgid "<b>Tools:</b>"
#~ msgstr "<b>Tools:</b>"

#~ msgid "<b>Export G-Code:</b>"
#~ msgstr "<b>Export G-Code:</b>"

#~ msgid "How to select the polygons to paint."
#~ msgstr "How to select the polygons to paint."

#~ msgid "<b>V-Shape Tool Calculator:</b>"
#~ msgstr "<b>V-Shape Tool Calculator:</b>"

#~ msgid "<b>ElectroPlating Calculator:</b>"
#~ msgstr "<b>ElectroPlating Calculator:</b>"

#~ msgid "<b>Name:</b>"
#~ msgstr "<b>Name:</b>"

#~ msgid "<b>Plot kind:</b>"
#~ msgstr "<b>Plot kind:</b>"

#~ msgid "<b>Display Annotation:</b>"
#~ msgstr "<b>Display Annotation:</b>"

#~ msgid "<b>GERBER:</b>"
#~ msgstr "<b>GERBER:</b>"

#~ msgid "<b>EXCELLON:</b>"
#~ msgstr "<b>EXCELLON:</b>"

#~ msgid "<b>GEOMETRY</b>:"
#~ msgstr "<b>GEOMETRY</b>:"

#~ msgid "<b>Panel Type:</b>"
#~ msgstr "<b>Panel Type:</b>"

#~ msgid "<b>Excellon format:</b>"
#~ msgstr "<b>Excellon format:</b>"

#~ msgid "<b>Gerber Objects</b>"
#~ msgstr "<b>Gerber Objects</b>"

#~ msgid "<b>Geometry Objects</b>"
#~ msgstr "<b>Geometry Objects</b>"

#~ msgid "Save &Defaults"
#~ msgstr "Save &Defaults"

#~ msgid "Line"
#~ msgstr "Line"

#~ msgid "Tool dia:                   "
#~ msgstr "Tool dia:                   "

#~ msgid ""
#~ "The diameter of the cutting\n"
#~ "tool.."
#~ msgstr ""
#~ "The diameter of the cutting\n"
#~ "tool.."

#~ msgid "Disable"
#~ msgstr "Disable"

#~ msgid "[WARNING_NOTCL] Move cancelled. No shape selected."
#~ msgstr "[WARNING_NOTCL] Move cancelled. No shape selected."

#~ msgid "Click on the Destination point..."
#~ msgstr "Click on the Destination point..."

#~ msgid "Copy as &Geom"
#~ msgstr "Copy as &Geom"

#~ msgid "Ap. Scale Factor:"
#~ msgstr "Ap. Scale Factor:"

#~ msgid ""
#~ "Change the size of the selected apertures.\n"
#~ "Factor by which to multiply\n"
#~ "geometric features of this object."
#~ msgstr ""
#~ "Change the size of the selected apertures.\n"
#~ "Factor by which to multiply\n"
#~ "geometric features of this object."

#~ msgid "Ap. Buffer Factor:"
#~ msgstr "Ap. Buffer Factor:"

#~ msgid ""
#~ "Change the size of the selected apertures.\n"
#~ "Factor by which to expand/shrink\n"
#~ "geometric features of this object."
#~ msgstr ""
#~ "Change the size of the selected apertures.\n"
#~ "Factor by which to expand/shrink\n"
#~ "geometric features of this object."

#~ msgid "In"
#~ msgstr "In"

#~ msgid "Out"
#~ msgstr "Out"

#~ msgid "Custom"
#~ msgstr "Custom"

#~ msgid "Both"
#~ msgstr "Both"

#~ msgid "Pos"
#~ msgstr "Pos"

#~ msgid "Neg"
#~ msgstr "Neg"

#~ msgid "Solid   "
#~ msgstr "Solid   "

#~ msgid "M-Color   "
#~ msgstr "M-Color   "

#~ msgid "Click on CENTER ..."
#~ msgstr "Click on CENTER ..."

#~ msgid "[success] Done. Region completed."
#~ msgstr "[success] Done. Region completed."

#~ msgid "Del Aperture:"
#~ msgstr "Del Aperture:"

#~ msgid ""
#~ "Delete a aperture in the aperture list.\n"
#~ "It will delete also the associated geometry."
#~ msgstr ""
#~ "Delete a aperture in the aperture list.\n"
#~ "It will delete also the associated geometry."

#~ msgid "Save && Close Edit"
#~ msgstr "Save && Close Edit"

#~ msgid ""
#~ "<b>Editor Shortcut list</b><br>\n"
#~ "            <br>\n"
#~ "            <strong><span style=\"color:#0000ff\">GEOMETRY EDITOR</span></"
#~ "strong><br>\n"
#~ "    \n"
#~ "            <table border=\"0\" cellpadding=\"0\" cellspacing=\"0\" style="
#~ "\"width:283px\">\n"
#~ "                <tbody>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\" width=\"89\"><strong>A</"
#~ "strong></td>\n"
#~ "                        <td width=\"194\">&nbsp;Draw an Arc</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>B</strong></td>\n"
#~ "                        <td>&nbsp;Buffer Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>C</strong></td>\n"
#~ "                        <td>&nbsp;Copy Geo Item</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>E</strong></td>\n"
#~ "                        <td>&nbsp;Polygon Intersection Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>I</strong></td>\n"
#~ "                        <td>&nbsp;Paint Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>J</strong></td>\n"
#~ "                        <td>&nbsp;Jump to Location (x, y)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>K</strong></td>\n"
#~ "                        <td>&nbsp;Toggle Corner Snap</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>M</strong></td>\n"
#~ "                        <td>&nbsp;Move Geo Item</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>N</strong></td>\n"
#~ "                        <td>&nbsp;Draw a Polygon</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>O</strong></td>\n"
#~ "                        <td>&nbsp;Draw a Circle</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>P</strong></td>\n"
#~ "                        <td>&nbsp;Draw a Path</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>R</strong></td>\n"
#~ "                        <td>&nbsp;Draw Rectangle</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>S</strong></td>\n"
#~ "                        <td>&nbsp;Polygon Substraction Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>T</strong></td>\n"
#~ "                        <td>&nbsp;Add Text Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>U</strong></td>\n"
#~ "                        <td>&nbsp;Polygon Union Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>X</strong></td>\n"
#~ "                        <td>&nbsp;Flip shape on X axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Y</strong></td>\n"
#~ "                        <td>&nbsp;Flip shape on Y axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>SHIFT+X</strong></td>\n"
#~ "                        <td>&nbsp;Skew shape on X axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>SHIFT+Y</strong></td>\n"
#~ "                        <td>&nbsp;Skew shape on Y axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+R</strong></td>\n"
#~ "                        <td>&nbsp;Editor Transformation Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+X</strong></td>\n"
#~ "                        <td>&nbsp;Offset shape on X axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+Y</strong></td>\n"
#~ "                        <td>&nbsp;Offset shape on Y axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>CTRL+M</strong></td>\n"
#~ "                        <td>&nbsp;Measurement Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>CTRL+S</strong></td>\n"
#~ "                        <td>&nbsp;Save Object and Exit Editor</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>CTRL+X</strong></td>\n"
#~ "                        <td>&nbsp;Polygon Cut Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Space</strong></td>\n"
#~ "                        <td>&nbsp;Rotate Geometry</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ENTER</strong></td>\n"
#~ "                        <td>&nbsp;Finish drawing for certain tools</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ESC</strong></td>\n"
#~ "                        <td>&nbsp;Abort and return to Select</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Del</strong></td>\n"
#~ "                        <td>&nbsp;Delete Shape</td>\n"
#~ "                    </tr>\n"
#~ "                </tbody>\n"
#~ "            </table>\n"
#~ "            <br>\n"
#~ "            <br>\n"
#~ "            <strong><span style=\"color:#ff0000\">EXCELLON EDITOR</span></"
#~ "strong><br>\n"
#~ "            <table border=\"0\" cellpadding=\"0\" cellspacing=\"0\" style="
#~ "\"width:283px\">\n"
#~ "                <tbody>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\" width=\"89\"><strong>A</"
#~ "strong></td>\n"
#~ "                        <td width=\"194\">&nbsp;Add Drill Array</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>C</strong></td>\n"
#~ "                        <td>&nbsp;Copy Drill(s)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>D</strong></td>\n"
#~ "                        <td>&nbsp;Add Drill</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>J</strong></td>\n"
#~ "                        <td>&nbsp;Jump to Location (x, y)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>M</strong></td>\n"
#~ "                        <td>&nbsp;Move Drill(s)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>R</strong></td>\n"
#~ "                        <td>&nbsp;Resize Drill(s)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>T</strong></td>\n"
#~ "                        <td>&nbsp;Add a new Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Del</strong></td>\n"
#~ "                        <td>&nbsp;Delete Drill(s)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Del</strong></td>\n"
#~ "                        <td>&nbsp;Alternate: Delete Tool(s)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ESC</strong></td>\n"
#~ "                        <td>&nbsp;Abort and return to Select</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>CTRL+S</strong></td>\n"
#~ "                        <td>&nbsp;Save Object and Exit Editor</td>\n"
#~ "                    </tr>\n"
#~ "                </tbody>\n"
#~ "            </table>\n"
#~ "                    "
#~ msgstr ""
#~ "<b>Editor Shortcut list</b><br>\n"
#~ "            <br>\n"
#~ "            <strong><span style=\"color:#0000ff\">GEOMETRY EDITOR</span></"
#~ "strong><br>\n"
#~ "    \n"
#~ "            <table border=\"0\" cellpadding=\"0\" cellspacing=\"0\" style="
#~ "\"width:283px\">\n"
#~ "                <tbody>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\" width=\"89\"><strong>A</"
#~ "strong></td>\n"
#~ "                        <td width=\"194\">&nbsp;Draw an Arc</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>B</strong></td>\n"
#~ "                        <td>&nbsp;Buffer Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>C</strong></td>\n"
#~ "                        <td>&nbsp;Copy Geo Item</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>E</strong></td>\n"
#~ "                        <td>&nbsp;Polygon Intersection Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>I</strong></td>\n"
#~ "                        <td>&nbsp;Paint Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>J</strong></td>\n"
#~ "                        <td>&nbsp;Jump to Location (x, y)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>K</strong></td>\n"
#~ "                        <td>&nbsp;Toggle Corner Snap</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>M</strong></td>\n"
#~ "                        <td>&nbsp;Move Geo Item</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>N</strong></td>\n"
#~ "                        <td>&nbsp;Draw a Polygon</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>O</strong></td>\n"
#~ "                        <td>&nbsp;Draw a Circle</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>P</strong></td>\n"
#~ "                        <td>&nbsp;Draw a Path</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>R</strong></td>\n"
#~ "                        <td>&nbsp;Draw Rectangle</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>S</strong></td>\n"
#~ "                        <td>&nbsp;Polygon Substraction Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>T</strong></td>\n"
#~ "                        <td>&nbsp;Add Text Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>U</strong></td>\n"
#~ "                        <td>&nbsp;Polygon Union Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>X</strong></td>\n"
#~ "                        <td>&nbsp;Flip shape on X axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Y</strong></td>\n"
#~ "                        <td>&nbsp;Flip shape on Y axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>SHIFT+X</strong></td>\n"
#~ "                        <td>&nbsp;Skew shape on X axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>SHIFT+Y</strong></td>\n"
#~ "                        <td>&nbsp;Skew shape on Y axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+R</strong></td>\n"
#~ "                        <td>&nbsp;Editor Transformation Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+X</strong></td>\n"
#~ "                        <td>&nbsp;Offset shape on X axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+Y</strong></td>\n"
#~ "                        <td>&nbsp;Offset shape on Y axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>CTRL+M</strong></td>\n"
#~ "                        <td>&nbsp;Measurement Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>CTRL+S</strong></td>\n"
#~ "                        <td>&nbsp;Save Object and Exit Editor</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>CTRL+X</strong></td>\n"
#~ "                        <td>&nbsp;Polygon Cut Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Space</strong></td>\n"
#~ "                        <td>&nbsp;Rotate Geometry</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ENTER</strong></td>\n"
#~ "                        <td>&nbsp;Finish drawing for certain tools</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ESC</strong></td>\n"
#~ "                        <td>&nbsp;Abort and return to Select</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Del</strong></td>\n"
#~ "                        <td>&nbsp;Delete Shape</td>\n"
#~ "                    </tr>\n"
#~ "                </tbody>\n"
#~ "            </table>\n"
#~ "            <br>\n"
#~ "            <br>\n"
#~ "            <strong><span style=\"color:#ff0000\">EXCELLON EDITOR</span></"
#~ "strong><br>\n"
#~ "            <table border=\"0\" cellpadding=\"0\" cellspacing=\"0\" style="
#~ "\"width:283px\">\n"
#~ "                <tbody>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\" width=\"89\"><strong>A</"
#~ "strong></td>\n"
#~ "                        <td width=\"194\">&nbsp;Add Drill Array</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>C</strong></td>\n"
#~ "                        <td>&nbsp;Copy Drill(s)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>D</strong></td>\n"
#~ "                        <td>&nbsp;Add Drill</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>J</strong></td>\n"
#~ "                        <td>&nbsp;Jump to Location (x, y)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>M</strong></td>\n"
#~ "                        <td>&nbsp;Move Drill(s)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>R</strong></td>\n"
#~ "                        <td>&nbsp;Resize Drill(s)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>T</strong></td>\n"
#~ "                        <td>&nbsp;Add a new Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Del</strong></td>\n"
#~ "                        <td>&nbsp;Delete Drill(s)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Del</strong></td>\n"
#~ "                        <td>&nbsp;Alternate: Delete Tool(s)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ESC</strong></td>\n"
#~ "                        <td>&nbsp;Abort and return to Select</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>CTRL+S</strong></td>\n"
#~ "                        <td>&nbsp;Save Object and Exit Editor</td>\n"
#~ "                    </tr>\n"
#~ "                </tbody>\n"
#~ "            </table>\n"
#~ "                    "

#~ msgid "[ERROR_NOTCL]Could not load defaults file."
#~ msgstr "[ERROR_NOTCL]Could not load defaults file."

#~ msgid ""
#~ "[ERROR_NOTCL] The aperture scale factor value is missing or wrong format."
#~ msgstr ""
#~ "[ERROR_NOTCL] The aperture scale factor value is missing or wrong format."

#~ msgid "[WARNING_NOTCL]Export Machine Code cancelled ..."
#~ msgstr "[WARNING_NOTCL]Export Machine Code cancelled ..."

#~ msgid "[success] GUI settings deleted ..."
#~ msgstr "[success] GUI settings deleted ..."

#~ msgid "Scale Factor:"
#~ msgstr "Scale Factor:"

#~ msgid "Buffer Factor:"
#~ msgstr "Buffer Factor:"

#~ msgid "<b>Generate new Gerber Object:</b>"
#~ msgstr "<b>Generate new Gerber Object:</b>"

#~ msgid "Will generate a new Gerber object from the changed apertures."
#~ msgstr "Will generate a new Gerber object from the changed apertures."

#~ msgid ""
#~ "Will generate a new Gerber object from the changed apertures.\n"
#~ "This new object can then be isolated etc."
#~ msgstr ""
#~ "Will generate a new Gerber object from the changed apertures.\n"
#~ "This new object can then be isolated etc."

#~ msgid "[success]Offset on the %s axis done ..."
#~ msgstr "[success]Offset on the %s axis done ..."

#~ msgid ""
#~ "How much (fraction) of the tool width to overlap each tool pass.\n"
#~ "Example:\n"
#~ "A value here of 0.25 means 25\\% from the tool diameter found above.\n"
#~ "\n"
#~ "Adjust the value starting with lower values\n"
#~ "and increasing it if areas that should be painted are still \n"
#~ "not painted.\n"
#~ "Lower values = faster processing, faster execution on PCB.\n"
#~ "Higher values = slow processing and slow execution on CNC\n"
#~ "due of too many paths."
#~ msgstr ""
#~ "How much (fraction) of the tool width to overlap each tool pass.\n"
#~ "Example:\n"
#~ "A value here of 0.25 means 25\\% from the tool diameter found above.\n"
#~ "\n"
#~ "Adjust the value starting with lower values\n"
#~ "and increasing it if areas that should be painted are still \n"
#~ "not painted.\n"
#~ "Lower values = faster processing, faster execution on PCB.\n"
#~ "Higher values = slow processing and slow execution on CNC\n"
#~ "due of too many paths."

#~| msgid "z_toolchange = Z coord for Toolchange"
#~ msgid "z_move = Z coord for Toolchange"
#~ msgstr "z_move = Z coord for Toolchange"

#~ msgid "%s/Project_%s"
#~ msgstr "%s/Project_%s"

#~ msgid "tool_tab"
#~ msgstr "tool_tab"