FlatCAM/locale/en/LC_MESSAGES/strings.po

# SOME DESCRIPTIVE TITLE.
# Copyright (C) YEAR ORGANIZATION
# FIRST AUTHOR <EMAIL@ADDRESS>, YEAR.
#
msgid ""
msgstr ""
"Project-Id-Version: \n"
"POT-Creation-Date: 2019-09-20 01:31+0300\n"
"PO-Revision-Date: 2019-09-20 01:31+0300\n"
"Last-Translator: \n"
"Language-Team: \n"
"Language: en\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Generated-By: pygettext.py 1.5\n"
"X-Generator: Poedit 2.2.3\n"
"Plural-Forms: nplurals=2; plural=(n != 1);\n"
"X-Poedit-Basepath: ../../..\n"
"X-Poedit-SearchPath-0: .\n"
"X-Poedit-SearchPathExcluded-0: build\n"
"X-Poedit-SearchPathExcluded-1: doc\n"
"X-Poedit-SearchPathExcluded-2: tests\n"

#: FlatCAMApp.py:402
msgid "FlatCAM is initializing ..."
msgstr "FlatCAM is initializing ..."

#: FlatCAMApp.py:1224
msgid "Could not find the Language files. The App strings are missing."
msgstr "Could not find the Language files. The App strings are missing."

#: FlatCAMApp.py:1588
msgid ""
"FlatCAM is initializing ...\n"
"Canvas initialization started."
msgstr ""
"FlatCAM is initializing ...\n"
"Canvas initialization started."

#: FlatCAMApp.py:1601
msgid ""
"FlatCAM is initializing ...\n"
"Canvas initialization started.\n"
"Canvas initialization finished in"
msgstr ""
"FlatCAM is initializing ...\n"
"Canvas initialization started.\n"
"Canvas initialization finished in"

#: FlatCAMApp.py:1821
msgid "Detachable Tabs"
msgstr "Detachable Tabs"

#: FlatCAMApp.py:2305
msgid ""
"Open Source Software - Type help to get started\n"
"\n"
msgstr ""
"Open Source Software - Type help to get started\n"
"\n"

#: FlatCAMApp.py:2501 FlatCAMApp.py:8129
msgid "New Project - Not saved"
msgstr "New Project - Not saved"

#: FlatCAMApp.py:2574 FlatCAMApp.py:8183 FlatCAMApp.py:8219 FlatCAMApp.py:8259
#: FlatCAMApp.py:8946 FlatCAMApp.py:10135 FlatCAMApp.py:10188
#| msgid ""
#| "FlatCAM is initializing ...\n"
#| "Canvas initialization started.\n"
#| "Canvas initialization finished in"
msgid ""
"Canvas initialization started.\n"
"Canvas initialization finished in"
msgstr ""
"Canvas initialization started.\n"
"Canvas initialization finished in"

#: FlatCAMApp.py:2576
#| msgid "Run Script ..."
msgid "Executing Tcl Script ..."
msgstr "Executing Tcl Script ..."

#: FlatCAMApp.py:2630 ObjectCollection.py:80 flatcamTools/ToolImage.py:218
#: flatcamTools/ToolPcbWizard.py:301 flatcamTools/ToolPcbWizard.py:324
msgid "Open cancelled."
msgstr "Open cancelled."

#: FlatCAMApp.py:2646
msgid "Open Config file failed."
msgstr "Open Config file failed."

#: FlatCAMApp.py:2661
msgid "Open Script file failed."
msgstr "Open Script file failed."

#: FlatCAMApp.py:2687
msgid "Open Excellon file failed."
msgstr "Open Excellon file failed."

#: FlatCAMApp.py:2701
msgid "Open GCode file failed."
msgstr "Open GCode file failed."

#: FlatCAMApp.py:2714
msgid "Open Gerber file failed."
msgstr "Open Gerber file failed."

#: FlatCAMApp.py:2986
msgid "Select a Geometry, Gerber or Excellon Object to edit."
msgstr "Select a Geometry, Gerber or Excellon Object to edit."

#: FlatCAMApp.py:3000
msgid ""
"Simultanoeus editing of tools geometry in a MultiGeo Geometry is not "
"possible.\n"
"Edit only one geometry at a time."
msgstr ""
"Simultanoeus editing of tools geometry in a MultiGeo Geometry is not "
"possible.\n"
"Edit only one geometry at a time."

#: FlatCAMApp.py:3055
msgid "Editor is activated ..."
msgstr "Editor is activated ..."

#: FlatCAMApp.py:3073
msgid "Do you want to save the edited object?"
msgstr "Do you want to save the edited object?"

#: FlatCAMApp.py:3074 flatcamGUI/FlatCAMGUI.py:1791
msgid "Close Editor"
msgstr "Close Editor"

#: FlatCAMApp.py:3077 FlatCAMApp.py:4534 FlatCAMApp.py:7130 FlatCAMApp.py:8036
#: FlatCAMTranslation.py:96 FlatCAMTranslation.py:169
#: flatcamGUI/PreferencesUI.py:817
msgid "Yes"
msgstr "Yes"

#: FlatCAMApp.py:3078 FlatCAMApp.py:4535 FlatCAMApp.py:7131 FlatCAMApp.py:8037
#: FlatCAMTranslation.py:97 FlatCAMTranslation.py:170
#: flatcamGUI/PreferencesUI.py:818 flatcamGUI/PreferencesUI.py:3347
#: flatcamGUI/PreferencesUI.py:3711 flatcamTools/ToolNonCopperClear.py:171
#: flatcamTools/ToolPaint.py:144
msgid "No"
msgstr "No"

#: FlatCAMApp.py:3079 FlatCAMApp.py:4536 FlatCAMApp.py:5405 FlatCAMApp.py:6625
#: FlatCAMApp.py:8038
msgid "Cancel"
msgstr "Cancel"

#: FlatCAMApp.py:3107
msgid "Object empty after edit."
msgstr "Object empty after edit."

#: FlatCAMApp.py:3130 FlatCAMApp.py:3151 FlatCAMApp.py:3164
msgid "Select a Gerber, Geometry or Excellon Object to update."
msgstr "Select a Gerber, Geometry or Excellon Object to update."

#: FlatCAMApp.py:3134
msgid "is updated, returning to App..."
msgstr "is updated, returning to App..."

#: FlatCAMApp.py:3529 FlatCAMApp.py:3583 FlatCAMApp.py:4394
msgid "Could not load defaults file."
msgstr "Could not load defaults file."

#: FlatCAMApp.py:3542 FlatCAMApp.py:3592 FlatCAMApp.py:4404
msgid "Failed to parse defaults file."
msgstr "Failed to parse defaults file."

#: FlatCAMApp.py:3563 FlatCAMApp.py:3567
msgid "Import FlatCAM Preferences"
msgstr "Import FlatCAM Preferences"

#: FlatCAMApp.py:3574
msgid "FlatCAM preferences import cancelled."
msgstr "FlatCAM preferences import cancelled."

#: FlatCAMApp.py:3597
msgid "Imported Defaults from"
msgstr "Imported Defaults from"

#: FlatCAMApp.py:3617 FlatCAMApp.py:3622
msgid "Export FlatCAM Preferences"
msgstr "Export FlatCAM Preferences"

#: FlatCAMApp.py:3630
msgid "FlatCAM preferences export cancelled."
msgstr "FlatCAM preferences export cancelled."

#: FlatCAMApp.py:3639 FlatCAMApp.py:6390 FlatCAMApp.py:9127 FlatCAMApp.py:9238
#: FlatCAMApp.py:9363 FlatCAMApp.py:9422 FlatCAMApp.py:9540 FlatCAMApp.py:9679
#: FlatCAMObj.py:6073 flatcamTools/ToolSolderPaste.py:1428
msgid ""
"Permission denied, saving not possible.\n"
"Most likely another app is holding the file open and not accessible."
msgstr ""
"Permission denied, saving not possible.\n"
"Most likely another app is holding the file open and not accessible."

#: FlatCAMApp.py:3652
msgid "Could not load preferences file."
msgstr "Could not load preferences file."

#: FlatCAMApp.py:3672 FlatCAMApp.py:4451
msgid "Failed to write defaults to file."
msgstr "Failed to write defaults to file."

#: FlatCAMApp.py:3678
msgid "Exported preferences to"
msgstr "Exported preferences to"

#: FlatCAMApp.py:3695
msgid "FlatCAM Preferences Folder opened."
msgstr "FlatCAM Preferences Folder opened."

#: FlatCAMApp.py:3768
msgid "Failed to open recent files file for writing."
msgstr "Failed to open recent files file for writing."

#: FlatCAMApp.py:3779
msgid "Failed to open recent projects file for writing."
msgstr "Failed to open recent projects file for writing."

#: FlatCAMApp.py:3862 camlib.py:4896 flatcamTools/ToolSolderPaste.py:1214
msgid "An internal error has ocurred. See shell.\n"
msgstr "An internal error has ocurred. See shell.\n"

#: FlatCAMApp.py:3863
#, python-brace-format
msgid ""
"Object ({kind}) failed because: {error} \n"
"\n"
msgstr ""
"Object ({kind}) failed because: {error} \n"
"\n"

#: FlatCAMApp.py:3884
msgid "Converting units to "
msgstr "Converting units to "

#: FlatCAMApp.py:3980 FlatCAMApp.py:3983 FlatCAMApp.py:3986 FlatCAMApp.py:3989
#, python-brace-format
msgid ""
"[selected] {kind} created/selected: <span style=\"color:{color};\">{name}</"
"span>"
msgstr ""
"[selected] {kind} created/selected: <span style=\"color:{color};\">{name}</"
"span>"

#: FlatCAMApp.py:4006 FlatCAMApp.py:6693 FlatCAMObj.py:228 FlatCAMObj.py:243
#: FlatCAMObj.py:259 FlatCAMObj.py:339 flatcamTools/ToolMove.py:187
msgid "Plotting"
msgstr "Plotting"

#: FlatCAMApp.py:4100 flatcamGUI/FlatCAMGUI.py:414
msgid "About FlatCAM"
msgstr "About FlatCAM"

#: FlatCAMApp.py:4129
msgid "2D Computer-Aided Printed Circuit Board Manufacturing"
msgstr "2D Computer-Aided Printed Circuit Board Manufacturing"

#: FlatCAMApp.py:4130
msgid "Development"
msgstr "Development"

#: FlatCAMApp.py:4131
msgid "DOWNLOAD"
msgstr "DOWNLOAD"

#: FlatCAMApp.py:4132
msgid "Issue tracker"
msgstr "Issue tracker"

#: FlatCAMApp.py:4136
msgid "Close"
msgstr "Close"

#: FlatCAMApp.py:4151
msgid ""
"(c) Copyright 2014 Juan Pablo Caram.\n"
"\n"
"Licensed under the MIT license:\n"
"http://www.opensource.org/licenses/mit-license.php\n"
"\n"
"Permission is hereby granted, free of charge, to any person obtaining a "
"copy\n"
"of this software and associated documentation files (the \"Software\"), to "
"deal\n"
"in the Software without restriction, including without limitation the "
"rights\n"
"to use, copy, modify, merge, publish, distribute, sublicense, and/or sell\n"
"copies of the Software, and to permit persons to whom the Software is\n"
" furnished to do so, subject to the following conditions:\n"
"\n"
"The above copyright notice and this permission notice shall be included in\n"
"all copies or substantial portions of the Software.\n"
"\n"
"THE SOFTWARE IS PROVIDED \"AS IS\", WITHOUT WARRANTY OF ANY KIND, EXPRESS "
"OR\n"
"IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,\n"
"FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE\n"
"AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER\n"
"LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING "
"FROM,\n"
"OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN\n"
"THE SOFTWARE."
msgstr ""
"(c) Copyright 2014 Juan Pablo Caram.\n"
"\n"
"Licensed under the MIT license:\n"
"http://www.opensource.org/licenses/mit-license.php\n"
"\n"
"Permission is hereby granted, free of charge, to any person obtaining a "
"copy\n"
"of this software and associated documentation files (the \"Software\"), to "
"deal\n"
"in the Software without restriction, including without limitation the "
"rights\n"
"to use, copy, modify, merge, publish, distribute, sublicense, and/or sell\n"
"copies of the Software, and to permit persons to whom the Software is\n"
" furnished to do so, subject to the following conditions:\n"
"\n"
"The above copyright notice and this permission notice shall be included in\n"
"all copies or substantial portions of the Software.\n"
"\n"
"THE SOFTWARE IS PROVIDED \"AS IS\", WITHOUT WARRANTY OF ANY KIND, EXPRESS "
"OR\n"
"IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,\n"
"FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE\n"
"AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER\n"
"LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING "
"FROM,\n"
"OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN\n"
"THE SOFTWARE."

#: FlatCAMApp.py:4198
msgid "Splash"
msgstr "Splash"

#: FlatCAMApp.py:4204
msgid "Programmers"
msgstr "Programmers"

#: FlatCAMApp.py:4210
msgid "Translators"
msgstr "Translators"

#: FlatCAMApp.py:4216
msgid "License"
msgstr "License"

#: FlatCAMApp.py:4237
msgid "Programmer"
msgstr "Programmer"

#: FlatCAMApp.py:4238
msgid "Status"
msgstr "Status"

#: FlatCAMApp.py:4240
msgid "Program Author"
msgstr "Program Author"

#: FlatCAMApp.py:4244
msgid "Maintainer >=2019"
msgstr "Maintainer >=2019"

#: FlatCAMApp.py:4299
msgid "Language"
msgstr "Language"

#: FlatCAMApp.py:4300
msgid "Translator"
msgstr "Translator"

#: FlatCAMApp.py:4301
msgid "E-mail"
msgstr "E-mail"

#: FlatCAMApp.py:4456 FlatCAMApp.py:7140
msgid "Preferences saved."
msgstr "Preferences saved."

#: FlatCAMApp.py:4484
msgid "Could not load factory defaults file."
msgstr "Could not load factory defaults file."

#: FlatCAMApp.py:4494
msgid "Failed to parse factory defaults file."
msgstr "Failed to parse factory defaults file."

#: FlatCAMApp.py:4509
msgid "Failed to write factory defaults to file."
msgstr "Failed to write factory defaults to file."

#: FlatCAMApp.py:4513
msgid "Factory defaults saved."
msgstr "Factory defaults saved."

#: FlatCAMApp.py:4524 flatcamGUI/FlatCAMGUI.py:3428
msgid "Application is saving the project. Please wait ..."
msgstr "Application is saving the project. Please wait ..."

#: FlatCAMApp.py:4529 FlatCAMTranslation.py:164
msgid ""
"There are files/objects modified in FlatCAM. \n"
"Do you want to Save the project?"
msgstr ""
"There are files/objects modified in FlatCAM. \n"
"Do you want to Save the project?"

#: FlatCAMApp.py:4532 FlatCAMApp.py:8034 FlatCAMTranslation.py:167
msgid "Save changes"
msgstr "Save changes"

#: FlatCAMApp.py:4762
msgid "Selected Excellon file extensions registered with FlatCAM."
msgstr "Selected Excellon file extensions registered with FlatCAM."

#: FlatCAMApp.py:4784
msgid "Selected GCode file extensions registered with FlatCAM."
msgstr "Selected GCode file extensions registered with FlatCAM."

#: FlatCAMApp.py:4806
msgid "Selected Gerber file extensions registered with FlatCAM."
msgstr "Selected Gerber file extensions registered with FlatCAM."

#: FlatCAMApp.py:4972 FlatCAMApp.py:5028 FlatCAMApp.py:5056
msgid "At least two objects are required for join. Objects currently selected"
msgstr "At least two objects are required for join. Objects currently selected"

#: FlatCAMApp.py:4981
msgid ""
"Failed join. The Geometry objects are of different types.\n"
"At least one is MultiGeo type and the other is SingleGeo type. A possibility "
"is to convert from one to another and retry joining \n"
"but in the case of converting from MultiGeo to SingleGeo, informations may "
"be lost and the result may not be what was expected. \n"
"Check the generated GCODE."
msgstr ""
"Failed join. The Geometry objects are of different types.\n"
"At least one is MultiGeo type and the other is SingleGeo type. A possibility "
"is to convert from one to another and retry joining \n"
"but in the case of converting from MultiGeo to SingleGeo, informations may "
"be lost and the result may not be what was expected. \n"
"Check the generated GCODE."

#: FlatCAMApp.py:5023
msgid "Failed. Excellon joining works only on Excellon objects."
msgstr "Failed. Excellon joining works only on Excellon objects."

#: FlatCAMApp.py:5051
msgid "Failed. Gerber joining works only on Gerber objects."
msgstr "Failed. Gerber joining works only on Gerber objects."

#: FlatCAMApp.py:5081 FlatCAMApp.py:5118
msgid "Failed. Select a Geometry Object and try again."
msgstr "Failed. Select a Geometry Object and try again."

#: FlatCAMApp.py:5086 FlatCAMApp.py:5123
msgid "Expected a FlatCAMGeometry, got"
msgstr "Expected a FlatCAMGeometry, got"

#: FlatCAMApp.py:5100
msgid "A Geometry object was converted to MultiGeo type."
msgstr "A Geometry object was converted to MultiGeo type."

#: FlatCAMApp.py:5138
msgid "A Geometry object was converted to SingleGeo type."
msgstr "A Geometry object was converted to SingleGeo type."

#: FlatCAMApp.py:5399
msgid "Toggle Units"
msgstr "Toggle Units"

#: FlatCAMApp.py:5401
msgid "Change project units ..."
msgstr "Change project units ..."

#: FlatCAMApp.py:5402
msgid ""
"Changing the units of the project causes all geometrical properties of all "
"objects to be scaled accordingly.\n"
"Continue?"
msgstr ""
"Changing the units of the project causes all geometrical properties of all "
"objects to be scaled accordingly.\n"
"Continue?"

#: FlatCAMApp.py:5404 FlatCAMApp.py:6519 FlatCAMApp.py:6624 FlatCAMApp.py:8343
#: FlatCAMApp.py:8357 FlatCAMApp.py:8612 FlatCAMApp.py:8623
msgid "Ok"
msgstr "Ok"

#: FlatCAMApp.py:5453
msgid "Converted units to"
msgstr "Converted units to"

#: FlatCAMApp.py:5465
msgid " Units conversion cancelled."
msgstr " Units conversion cancelled."

#: FlatCAMApp.py:6336
msgid "Open file"
msgstr "Open file"

#: FlatCAMApp.py:6367 FlatCAMApp.py:6372
msgid "Export G-Code ..."
msgstr "Export G-Code ..."

#: FlatCAMApp.py:6376
msgid "Export Code cancelled."
msgstr "Export Code cancelled."

#: FlatCAMApp.py:6386 FlatCAMObj.py:6069 flatcamTools/ToolSolderPaste.py:1424
msgid "No such file or directory"
msgstr "No such file or directory"

#: FlatCAMApp.py:6398 FlatCAMObj.py:6083
msgid "Saved to"
msgstr "Saved to"

#: FlatCAMApp.py:6507 FlatCAMApp.py:6540 FlatCAMApp.py:6551 FlatCAMApp.py:6562
#: flatcamTools/ToolNonCopperClear.py:919 flatcamTools/ToolSolderPaste.py:774
msgid "Please enter a tool diameter with non-zero value, in Float format."
msgstr "Please enter a tool diameter with non-zero value, in Float format."

#: FlatCAMApp.py:6512 FlatCAMApp.py:6545 FlatCAMApp.py:6556 FlatCAMApp.py:6567
msgid "Adding Tool cancelled"
msgstr "Adding Tool cancelled"

#: FlatCAMApp.py:6515
msgid ""
"Adding Tool works only when Advanced is checked.\n"
"Go to Preferences -> General - Show Advanced Options."
msgstr ""
"Adding Tool works only when Advanced is checked.\n"
"Go to Preferences -> General - Show Advanced Options."

#: FlatCAMApp.py:6619
msgid "Delete objects"
msgstr "Delete objects"

#: FlatCAMApp.py:6622
msgid ""
"Are you sure you want to permanently delete\n"
"the selected objects?"
msgstr ""
"Are you sure you want to permanently delete\n"
"the selected objects?"

#: FlatCAMApp.py:6653
msgid "Object(s) deleted"
msgstr "Object(s) deleted"

#: FlatCAMApp.py:6657
msgid "Failed. No object(s) selected..."
msgstr "Failed. No object(s) selected..."

#: FlatCAMApp.py:6659
msgid "Save the work in Editor and try again ..."
msgstr "Save the work in Editor and try again ..."

#: FlatCAMApp.py:6677
msgid "Object deleted"
msgstr "Object deleted"

#: FlatCAMApp.py:6701
msgid "Click to set the origin ..."
msgstr "Click to set the origin ..."

#: FlatCAMApp.py:6725
msgid "Setting Origin..."
msgstr "Setting Origin..."

#: FlatCAMApp.py:6737
msgid "Origin set"
msgstr "Origin set"

#: FlatCAMApp.py:6752
msgid "Jump to ..."
msgstr "Jump to ..."

#: FlatCAMApp.py:6753
msgid "Enter the coordinates in format X,Y:"
msgstr "Enter the coordinates in format X,Y:"

#: FlatCAMApp.py:6760
msgid "Wrong coordinates. Enter coordinates in format: X,Y"
msgstr "Wrong coordinates. Enter coordinates in format: X,Y"

#: FlatCAMApp.py:6779 flatcamEditors/FlatCAMExcEditor.py:3446
#: flatcamEditors/FlatCAMExcEditor.py:3454
#: flatcamEditors/FlatCAMGeoEditor.py:3792
#: flatcamEditors/FlatCAMGeoEditor.py:3807
#: flatcamEditors/FlatCAMGrbEditor.py:1067
#: flatcamEditors/FlatCAMGrbEditor.py:1171
#: flatcamEditors/FlatCAMGrbEditor.py:1445
#: flatcamEditors/FlatCAMGrbEditor.py:1703
#: flatcamEditors/FlatCAMGrbEditor.py:4221
#: flatcamEditors/FlatCAMGrbEditor.py:4236 flatcamGUI/FlatCAMGUI.py:2664
#: flatcamGUI/FlatCAMGUI.py:2676
msgid "Done."
msgstr "Done."

#: FlatCAMApp.py:6913 FlatCAMApp.py:6981
msgid "No object is selected. Select an object and try again."
msgstr "No object is selected. Select an object and try again."

#: FlatCAMApp.py:7001
msgid ""
"Aborting. The current task will be gracefully closed as soon as possible..."
msgstr ""
"Aborting. The current task will be gracefully closed as soon as possible..."

#: FlatCAMApp.py:7007
msgid "The current task was gracefully closed on user request..."
msgstr "The current task was gracefully closed on user request..."

#: FlatCAMApp.py:7024 flatcamGUI/GUIElements.py:1443
msgid "Preferences"
msgstr "Preferences"

#: FlatCAMApp.py:7091
msgid "Preferences edited but not saved."
msgstr "Preferences edited but not saved."

#: FlatCAMApp.py:7125
msgid ""
"One or more values are changed.\n"
"Do you want to save the Preferences?"
msgstr ""
"One or more values are changed.\n"
"Do you want to save the Preferences?"

#: FlatCAMApp.py:7127 flatcamGUI/FlatCAMGUI.py:192
#: flatcamGUI/FlatCAMGUI.py:1001
msgid "Save Preferences"
msgstr "Save Preferences"

#: FlatCAMApp.py:7156
msgid "No object selected to Flip on Y axis."
msgstr "No object selected to Flip on Y axis."

#: FlatCAMApp.py:7182
msgid "Flip on Y axis done."
msgstr "Flip on Y axis done."

#: FlatCAMApp.py:7185 FlatCAMApp.py:7228
#: flatcamEditors/FlatCAMGrbEditor.py:5660
msgid "Flip action was not executed."
msgstr "Flip action was not executed."

#: FlatCAMApp.py:7199
msgid "No object selected to Flip on X axis."
msgstr "No object selected to Flip on X axis."

#: FlatCAMApp.py:7225
msgid "Flip on X axis done."
msgstr "Flip on X axis done."

#: FlatCAMApp.py:7242
msgid "No object selected to Rotate."
msgstr "No object selected to Rotate."

#: FlatCAMApp.py:7245 FlatCAMApp.py:7293 FlatCAMApp.py:7326
msgid "Transform"
msgstr "Transform"

#: FlatCAMApp.py:7245 FlatCAMApp.py:7293 FlatCAMApp.py:7326
msgid "Enter the Angle value:"
msgstr "Enter the Angle value:"

#: FlatCAMApp.py:7276
msgid "Rotation done."
msgstr "Rotation done."

#: FlatCAMApp.py:7279
msgid "Rotation movement was not executed."
msgstr "Rotation movement was not executed."

#: FlatCAMApp.py:7291
msgid "No object selected to Skew/Shear on X axis."
msgstr "No object selected to Skew/Shear on X axis."

#: FlatCAMApp.py:7313
msgid "Skew on X axis done."
msgstr "Skew on X axis done."

#: FlatCAMApp.py:7324
msgid "No object selected to Skew/Shear on Y axis."
msgstr "No object selected to Skew/Shear on Y axis."

#: FlatCAMApp.py:7346
msgid "Skew on Y axis done."
msgstr "Skew on Y axis done."

#: FlatCAMApp.py:7397 flatcamGUI/FlatCAMGUI.py:1319
msgid "Grid On/Off"
msgstr "Grid On/Off"

#: FlatCAMApp.py:7410 flatcamEditors/FlatCAMGeoEditor.py:941
#: flatcamEditors/FlatCAMGrbEditor.py:2477
#: flatcamEditors/FlatCAMGrbEditor.py:5170 flatcamGUI/ObjectUI.py:1058
#: flatcamTools/ToolDblSided.py:160 flatcamTools/ToolDblSided.py:207
#: flatcamTools/ToolNonCopperClear.py:237 flatcamTools/ToolPaint.py:176
#: flatcamTools/ToolSolderPaste.py:115 flatcamTools/ToolSolderPaste.py:483
#: flatcamTools/ToolTransform.py:338
msgid "Add"
msgstr "Add"

#: FlatCAMApp.py:7411 FlatCAMObj.py:3601
#: flatcamEditors/FlatCAMGrbEditor.py:2482 flatcamGUI/FlatCAMGUI.py:552
#: flatcamGUI/FlatCAMGUI.py:760 flatcamGUI/FlatCAMGUI.py:1694
#: flatcamGUI/FlatCAMGUI.py:1789 flatcamGUI/FlatCAMGUI.py:2194
#: flatcamGUI/ObjectUI.py:1074 flatcamTools/ToolNonCopperClear.py:249
#: flatcamTools/ToolPaint.py:188 flatcamTools/ToolSolderPaste.py:121
#: flatcamTools/ToolSolderPaste.py:485
msgid "Delete"
msgstr "Delete"

#: FlatCAMApp.py:7424
msgid "New Grid ..."
msgstr "New Grid ..."

#: FlatCAMApp.py:7425
msgid "Enter a Grid Value:"
msgstr "Enter a Grid Value:"

#: FlatCAMApp.py:7433 FlatCAMApp.py:7460
msgid "Please enter a grid value with non-zero value, in Float format."
msgstr "Please enter a grid value with non-zero value, in Float format."

#: FlatCAMApp.py:7439
msgid "New Grid added"
msgstr "New Grid added"

#: FlatCAMApp.py:7442
msgid "Grid already exists"
msgstr "Grid already exists"

#: FlatCAMApp.py:7445
msgid "Adding New Grid cancelled"
msgstr "Adding New Grid cancelled"

#: FlatCAMApp.py:7467
msgid " Grid Value does not exist"
msgstr " Grid Value does not exist"

#: FlatCAMApp.py:7470
msgid "Grid Value deleted"
msgstr "Grid Value deleted"

#: FlatCAMApp.py:7473
msgid "Delete Grid value cancelled"
msgstr "Delete Grid value cancelled"

#: FlatCAMApp.py:7479
msgid "Key Shortcut List"
msgstr "Key Shortcut List"

#: FlatCAMApp.py:7513
msgid " No object selected to copy it's name"
msgstr " No object selected to copy it's name"

#: FlatCAMApp.py:7517
msgid "Name copied on clipboard ..."
msgstr "Name copied on clipboard ..."

#: FlatCAMApp.py:7560 flatcamEditors/FlatCAMGrbEditor.py:4161
msgid "Coordinates copied to clipboard."
msgstr "Coordinates copied to clipboard."

#: FlatCAMApp.py:7815 FlatCAMApp.py:7819 FlatCAMApp.py:7823 FlatCAMApp.py:7827
#: FlatCAMApp.py:7843 FlatCAMApp.py:7847 FlatCAMApp.py:7851 FlatCAMApp.py:7855
#: FlatCAMApp.py:7895 FlatCAMApp.py:7898 FlatCAMApp.py:7901 FlatCAMApp.py:7904
#: ObjectCollection.py:725 ObjectCollection.py:728 ObjectCollection.py:731
#: ObjectCollection.py:734
#, python-brace-format
msgid "[selected]<span style=\"color:{color};\">{name}</span> selected"
msgstr "[selected]<span style=\"color:{color};\">{name}</span> selected"

#: FlatCAMApp.py:8031
msgid ""
"There are files/objects opened in FlatCAM.\n"
"Creating a New project will delete them.\n"
"Do you want to Save the project?"
msgstr ""
"There are files/objects opened in FlatCAM.\n"
"Creating a New project will delete them.\n"
"Do you want to Save the project?"

#: FlatCAMApp.py:8053
msgid "New Project created"
msgstr "New Project created"

#: FlatCAMApp.py:8174 FlatCAMApp.py:8178 flatcamGUI/FlatCAMGUI.py:635
#: flatcamGUI/FlatCAMGUI.py:2067
msgid "Open Gerber"
msgstr "Open Gerber"

#: FlatCAMApp.py:8185
#| msgid "Open Gerber File"
msgid "Opening Gerber file."
msgstr "Opening Gerber file."

#: FlatCAMApp.py:8191
msgid "Open Gerber cancelled."
msgstr "Open Gerber cancelled."

#: FlatCAMApp.py:8211 FlatCAMApp.py:8215 flatcamGUI/FlatCAMGUI.py:636
#: flatcamGUI/FlatCAMGUI.py:2068
msgid "Open Excellon"
msgstr "Open Excellon"

#: FlatCAMApp.py:8221
#| msgid "Opening Excellon."
msgid "Opening Excellon file."
msgstr "Opening Excellon file."

#: FlatCAMApp.py:8227
msgid " Open Excellon cancelled."
msgstr " Open Excellon cancelled."

#: FlatCAMApp.py:8250 FlatCAMApp.py:8254
msgid "Open G-Code"
msgstr "Open G-Code"

#: FlatCAMApp.py:8261
#| msgid "Opening G-Code."
msgid "Opening G-Code file."
msgstr "Opening G-Code file."

#: FlatCAMApp.py:8267
msgid "Open G-Code cancelled."
msgstr "Open G-Code cancelled."

#: FlatCAMApp.py:8284 FlatCAMApp.py:8287 flatcamGUI/FlatCAMGUI.py:1325
msgid "Open Project"
msgstr "Open Project"

#: FlatCAMApp.py:8296
msgid "Open Project cancelled."
msgstr "Open Project cancelled."

#: FlatCAMApp.py:8315 FlatCAMApp.py:8318
msgid "Open Configuration File"
msgstr "Open Configuration File"

#: FlatCAMApp.py:8323
msgid "Open Config cancelled."
msgstr "Open Config cancelled."

#: FlatCAMApp.py:8339 FlatCAMApp.py:8608 FlatCAMApp.py:11235
#: FlatCAMApp.py:11256 FlatCAMApp.py:11278 FlatCAMApp.py:11301
msgid "No object selected."
msgstr "No object selected."

#: FlatCAMApp.py:8340 FlatCAMApp.py:8609
msgid "Please Select a Geometry object to export"
msgstr "Please Select a Geometry object to export"

#: FlatCAMApp.py:8354
msgid "Only Geometry, Gerber and CNCJob objects can be used."
msgstr "Only Geometry, Gerber and CNCJob objects can be used."

#: FlatCAMApp.py:8367 FlatCAMApp.py:8371
msgid "Export SVG"
msgstr "Export SVG"

#: FlatCAMApp.py:8377
msgid " Export SVG cancelled."
msgstr " Export SVG cancelled."

#: FlatCAMApp.py:8397
msgid "Data must be a 3D array with last dimension 3 or 4"
msgstr "Data must be a 3D array with last dimension 3 or 4"

#: FlatCAMApp.py:8403 FlatCAMApp.py:8407
msgid "Export PNG Image"
msgstr "Export PNG Image"

#: FlatCAMApp.py:8412
msgid "Export PNG cancelled."
msgstr "Export PNG cancelled."

#: FlatCAMApp.py:8432
msgid "No object selected. Please select an Gerber object to export."
msgstr "No object selected. Please select an Gerber object to export."

#: FlatCAMApp.py:8438 FlatCAMApp.py:8570
msgid "Failed. Only Gerber objects can be saved as Gerber files..."
msgstr "Failed. Only Gerber objects can be saved as Gerber files..."

#: FlatCAMApp.py:8450
msgid "Save Gerber source file"
msgstr "Save Gerber source file"

#: FlatCAMApp.py:8456
msgid "Save Gerber source file cancelled."
msgstr "Save Gerber source file cancelled."

#: FlatCAMApp.py:8476
msgid "No object selected. Please select an Excellon object to export."
msgstr "No object selected. Please select an Excellon object to export."

#: FlatCAMApp.py:8482 FlatCAMApp.py:8526
msgid "Failed. Only Excellon objects can be saved as Excellon files..."
msgstr "Failed. Only Excellon objects can be saved as Excellon files..."

#: FlatCAMApp.py:8490 FlatCAMApp.py:8494
msgid "Save Excellon source file"
msgstr "Save Excellon source file"

#: FlatCAMApp.py:8500
msgid "Saving Excellon source file cancelled."
msgstr "Saving Excellon source file cancelled."

#: FlatCAMApp.py:8520
msgid "No object selected. Please Select an Excellon object to export."
msgstr "No object selected. Please Select an Excellon object to export."

#: FlatCAMApp.py:8534 FlatCAMApp.py:8538
msgid "Export Excellon"
msgstr "Export Excellon"

#: FlatCAMApp.py:8544
msgid "Export Excellon cancelled."
msgstr "Export Excellon cancelled."

#: FlatCAMApp.py:8564
msgid "No object selected. Please Select an Gerber object to export."
msgstr "No object selected. Please Select an Gerber object to export."

#: FlatCAMApp.py:8578 FlatCAMApp.py:8582
msgid "Export Gerber"
msgstr "Export Gerber"

#: FlatCAMApp.py:8588
msgid "Export Gerber cancelled."
msgstr "Export Gerber cancelled."

#: FlatCAMApp.py:8620
msgid "Only Geometry objects can be used."
msgstr "Only Geometry objects can be used."

#: FlatCAMApp.py:8634 FlatCAMApp.py:8638
msgid "Export DXF"
msgstr "Export DXF"

#: FlatCAMApp.py:8645
msgid "Export DXF cancelled."
msgstr "Export DXF cancelled."

#: FlatCAMApp.py:8665 FlatCAMApp.py:8668
msgid "Import SVG"
msgstr "Import SVG"

#: FlatCAMApp.py:8678
msgid "Open SVG cancelled."
msgstr "Open SVG cancelled."

#: FlatCAMApp.py:8697 FlatCAMApp.py:8701
msgid "Import DXF"
msgstr "Import DXF"

#: FlatCAMApp.py:8711
msgid "Open DXF cancelled."
msgstr "Open DXF cancelled."

#: FlatCAMApp.py:8758
msgid "Viewing the source code of the selected object."
msgstr "Viewing the source code of the selected object."

#: FlatCAMApp.py:8759
msgid "Loading..."
msgstr "Loading..."

#: FlatCAMApp.py:8766
msgid "Select an Gerber or Excellon file to view it's source file."
msgstr "Select an Gerber or Excellon file to view it's source file."

#: FlatCAMApp.py:8778
msgid "Source Editor"
msgstr "Source Editor"

#: FlatCAMApp.py:8793 FlatCAMApp.py:8800
msgid "There is no selected object for which to see it's source file code."
msgstr "There is no selected object for which to see it's source file code."

#: FlatCAMApp.py:8812
msgid "Failed to load the source code for the selected object"
msgstr "Failed to load the source code for the selected object"

#: FlatCAMApp.py:8826 FlatCAMApp.py:10141 FlatCAMObj.py:5852
#: flatcamTools/ToolSolderPaste.py:1304
msgid "Code Editor"
msgstr "Code Editor"

#: FlatCAMApp.py:8844
msgid "New TCL script file created in Code Editor."
msgstr "New TCL script file created in Code Editor."

#: FlatCAMApp.py:8847
msgid "Script Editor"
msgstr "Script Editor"

#: FlatCAMApp.py:8850
msgid ""
"#\n"
"# CREATE A NEW FLATCAM TCL SCRIPT\n"
"# TCL Tutorial here: https://www.tcl.tk/man/tcl8.5/tutorial/tcltutorial."
"html\n"
"#\n"
"\n"
"# FlatCAM commands list:\n"
"# AddCircle, AddPolygon, AddPolyline, AddRectangle, AlignDrill, "
"AlignDrillGrid, ClearShell, ClearCopper,\n"
"# Cncjob, Cutout, Delete, Drillcncjob, ExportGcode, ExportSVG, Exteriors, "
"GeoCutout, GeoUnion, GetNames,\n"
"# GetSys, ImportSvg, Interiors, Isolate, Follow, JoinExcellon, JoinGeometry, "
"ListSys, MillDrills,\n"
"# MillSlots, Mirror, New, NewGeometry, Offset, OpenExcellon, OpenGCode, "
"OpenGerber, OpenProject,\n"
"# Options, Paint, Panelize, Plot, SaveProject, SaveSys, Scale, SetActive, "
"SetSys, Skew, SubtractPoly,\n"
"# SubtractRectangle, Version, WriteGCode\n"
"#\n"
"\n"
msgstr ""
"#\n"
"# CREATE A NEW FLATCAM TCL SCRIPT\n"
"# TCL Tutorial here: https://www.tcl.tk/man/tcl8.5/tutorial/tcltutorial."
"html\n"
"#\n"
"\n"
"# FlatCAM commands list:\n"
"# AddCircle, AddPolygon, AddPolyline, AddRectangle, AlignDrill, "
"AlignDrillGrid, ClearShell, ClearCopper,\n"
"# Cncjob, Cutout, Delete, Drillcncjob, ExportGcode, ExportSVG, Exteriors, "
"GeoCutout, GeoUnion, GetNames,\n"
"# GetSys, ImportSvg, Interiors, Isolate, Follow, JoinExcellon, JoinGeometry, "
"ListSys, MillDrills,\n"
"# MillSlots, Mirror, New, NewGeometry, Offset, OpenExcellon, OpenGCode, "
"OpenGerber, OpenProject,\n"
"# Options, Paint, Panelize, Plot, SaveProject, SaveSys, Scale, SetActive, "
"SetSys, Skew, SubtractPoly,\n"
"# SubtractRectangle, Version, WriteGCode\n"
"#\n"
"\n"

#: FlatCAMApp.py:8889 FlatCAMApp.py:8892
msgid "Open TCL script"
msgstr "Open TCL script"

#: FlatCAMApp.py:8902
msgid "Open TCL script cancelled."
msgstr "Open TCL script cancelled."

#: FlatCAMApp.py:8916
msgid "App.on_fileopenscript() -->"
msgstr "App.on_fileopenscript() -->"

#: FlatCAMApp.py:8924
#| msgid "Loaded Machine Code into Code Editor"
msgid "TCL script file opened in Code Editor."
msgstr "TCL script file opened in Code Editor."

#: FlatCAMApp.py:8948
msgid "Executing FlatCAMScript file."
msgstr "Executing FlatCAMScript file."

#: FlatCAMApp.py:8955 FlatCAMApp.py:8958
msgid "Run TCL script"
msgstr "Run TCL script"

#: FlatCAMApp.py:8968
msgid "Run TCL script cancelled."
msgstr "Run TCL script cancelled."

#: FlatCAMApp.py:8984
msgid "TCL script file opened in Code Editor and executed."
msgstr "TCL script file opened in Code Editor and executed."

#: FlatCAMApp.py:9035 FlatCAMApp.py:9039
msgid "Save Project As ..."
msgstr "Save Project As ..."

#: FlatCAMApp.py:9036
#, python-brace-format
msgid "{l_save}/Project_{date}"
msgstr "{l_save}/Project_{date}"

#: FlatCAMApp.py:9045
msgid "Save Project cancelled."
msgstr "Save Project cancelled."

#: FlatCAMApp.py:9093
msgid "Exporting SVG"
msgstr "Exporting SVG"

#: FlatCAMApp.py:9135 FlatCAMApp.py:9246 FlatCAMApp.py:9372
msgid "SVG file exported to"
msgstr "SVG file exported to"

#: FlatCAMApp.py:9170 FlatCAMApp.py:9295 flatcamTools/ToolPanelize.py:381
msgid "No object Box. Using instead"
msgstr "No object Box. Using instead"

#: FlatCAMApp.py:9249 FlatCAMApp.py:9375
msgid "Generating Film ... Please wait."
msgstr "Generating Film ... Please wait."

#: FlatCAMApp.py:9548
msgid "Excellon file exported to"
msgstr "Excellon file exported to"

#: FlatCAMApp.py:9557
msgid "Exporting Excellon"
msgstr "Exporting Excellon"

#: FlatCAMApp.py:9563 FlatCAMApp.py:9571
msgid "Could not export Excellon file."
msgstr "Could not export Excellon file."

#: FlatCAMApp.py:9687
msgid "Gerber file exported to"
msgstr "Gerber file exported to"

#: FlatCAMApp.py:9695
msgid "Exporting Gerber"
msgstr "Exporting Gerber"

#: FlatCAMApp.py:9701 FlatCAMApp.py:9709
msgid "Could not export Gerber file."
msgstr "Could not export Gerber file."

#: FlatCAMApp.py:9754
msgid "DXF file exported to"
msgstr "DXF file exported to"

#: FlatCAMApp.py:9760
msgid "Exporting DXF"
msgstr "Exporting DXF"

#: FlatCAMApp.py:9766 FlatCAMApp.py:9774
msgid "Could not export DXF file."
msgstr "Could not export DXF file."

#: FlatCAMApp.py:9795 FlatCAMApp.py:9839 FlatCAMApp.py:9885
msgid ""
"Not supported type is picked as parameter. Only Geometry and Gerber are "
"supported"
msgstr ""
"Not supported type is picked as parameter. Only Geometry and Gerber are "
"supported"

#: FlatCAMApp.py:9805
msgid "Importing SVG"
msgstr "Importing SVG"

#: FlatCAMApp.py:9817 FlatCAMApp.py:9861 FlatCAMApp.py:9906 FlatCAMApp.py:9987
#: FlatCAMApp.py:10054 FlatCAMApp.py:10121 flatcamTools/ToolPDF.py:220
msgid "Opened"
msgstr "Opened"

#: FlatCAMApp.py:9849
msgid "Importing DXF"
msgstr "Importing DXF"

#: FlatCAMApp.py:9893
msgid "Importing Image"
msgstr "Importing Image"

#: FlatCAMApp.py:9936
msgid "Failed to open file"
msgstr "Failed to open file"

#: FlatCAMApp.py:9941
msgid "Failed to parse file"
msgstr "Failed to parse file"

#: FlatCAMApp.py:9948 FlatCAMApp.py:10022 FlatCAMObj.py:4566
#: flatcamEditors/FlatCAMGrbEditor.py:3976 flatcamTools/ToolPcbWizard.py:437
msgid "An internal error has occurred. See shell.\n"
msgstr "An internal error has occurred. See shell.\n"

#: FlatCAMApp.py:9958
msgid "Object is not Gerber file or empty. Aborting object creation."
msgstr "Object is not Gerber file or empty. Aborting object creation."

#: FlatCAMApp.py:9966
msgid "Opening Gerber"
msgstr "Opening Gerber"

#: FlatCAMApp.py:9977
msgid " Open Gerber failed. Probable not a Gerber file."
msgstr " Open Gerber failed. Probable not a Gerber file."

#: FlatCAMApp.py:10012 flatcamTools/ToolPcbWizard.py:427
msgid "This is not Excellon file."
msgstr "This is not Excellon file."

#: FlatCAMApp.py:10016
msgid "Cannot open file"
msgstr "Cannot open file"

#: FlatCAMApp.py:10036 flatcamTools/ToolPDF.py:270
#: flatcamTools/ToolPcbWizard.py:451
msgid "No geometry found in file"
msgstr "No geometry found in file"

#: FlatCAMApp.py:10039
msgid "Opening Excellon."
msgstr "Opening Excellon."

#: FlatCAMApp.py:10046
msgid "Open Excellon file failed. Probable not an Excellon file."
msgstr "Open Excellon file failed. Probable not an Excellon file."

#: FlatCAMApp.py:10085
msgid "Failed to open"
msgstr "Failed to open"

#: FlatCAMApp.py:10096
msgid "This is not GCODE"
msgstr "This is not GCODE"

#: FlatCAMApp.py:10102
msgid "Opening G-Code."
msgstr "Opening G-Code."

#: FlatCAMApp.py:10111
msgid ""
"Failed to create CNCJob Object. Probable not a GCode file.\n"
" Attempting to create a FlatCAM CNCJob Object from G-Code file failed during "
"processing"
msgstr ""
"Failed to create CNCJob Object. Probable not a GCode file.\n"
" Attempting to create a FlatCAM CNCJob Object from G-Code file failed during "
"processing"

#: FlatCAMApp.py:10137
#| msgid "Open Config file failed."
msgid "Opening FlatCAM Config file."
msgstr "Opening FlatCAM Config file."

#: FlatCAMApp.py:10159
msgid "Failed to open config file"
msgstr "Failed to open config file"

#: FlatCAMApp.py:10185
msgid "Loading Project ... Please Wait ..."
msgstr "Loading Project ... Please Wait ..."

#: FlatCAMApp.py:10190
#| msgid "Saving FlatCAM Project"
msgid "Opening FlatCAM Project file."
msgstr "Opening FlatCAM Project file."

#: FlatCAMApp.py:10200 FlatCAMApp.py:10218
msgid "Failed to open project file"
msgstr "Failed to open project file"

#: FlatCAMApp.py:10252
msgid "Loading Project ... restoring"
msgstr "Loading Project ... restoring"

#: FlatCAMApp.py:10261
msgid "Project loaded from"
msgstr "Project loaded from"

#: FlatCAMApp.py:10334
#| msgid "Deselects all objects"
msgid "Redrawing all objects"
msgstr "Redrawing all objects"

#: FlatCAMApp.py:10366
msgid "Available commands:\n"
msgstr "Available commands:\n"

#: FlatCAMApp.py:10368
msgid ""
"\n"
"\n"
"Type help <command_name> for usage.\n"
" Example: help open_gerber"
msgstr ""
"\n"
"\n"
"Type help <command_name> for usage.\n"
" Example: help open_gerber"

#: FlatCAMApp.py:10518
msgid "Shows list of commands."
msgstr "Shows list of commands."

#: FlatCAMApp.py:10576
msgid "Failed to load recent item list."
msgstr "Failed to load recent item list."

#: FlatCAMApp.py:10584
msgid "Failed to parse recent item list."
msgstr "Failed to parse recent item list."

#: FlatCAMApp.py:10595
msgid "Failed to load recent projects item list."
msgstr "Failed to load recent projects item list."

#: FlatCAMApp.py:10603
msgid "Failed to parse recent project item list."
msgstr "Failed to parse recent project item list."

#: FlatCAMApp.py:10662 FlatCAMApp.py:10685
msgid "Clear Recent files"
msgstr "Clear Recent files"

#: FlatCAMApp.py:10702 flatcamGUI/FlatCAMGUI.py:1018
msgid "<b>Shortcut Key List</b>"
msgstr "<b>Shortcut Key List</b>"

#: FlatCAMApp.py:10776
msgid "Selected Tab - Choose an Item from Project Tab"
msgstr "Selected Tab - Choose an Item from Project Tab"

#: FlatCAMApp.py:10776
msgid "Details"
msgstr "Details"

#: FlatCAMApp.py:10777
msgid "The normal flow when working in FlatCAM is the following"
msgstr "The normal flow when working in FlatCAM is the following"

#: FlatCAMApp.py:10778
msgid ""
"Load/Import a Gerber, Excellon, Gcode, DXF, Raster Image or SVG file into "
"FlatCAM using either the"
msgstr ""
"Load/Import a Gerber, Excellon, Gcode, DXF, Raster Image or SVG file into "
"FlatCAM using either the"

#: FlatCAMApp.py:10779
msgid ""
"toolbars, key shortcuts or even dragging and dropping the files on the GUI"
msgstr ""
"toolbars, key shortcuts or even dragging and dropping the files on the GUI"

#: FlatCAMApp.py:10780
msgid ""
"You can also load a FlatCAM project by double clicking on the project file, "
"drag"
msgstr ""
"You can also load a FlatCAM project by double clicking on the project file, "
"drag"

#: FlatCAMApp.py:10781
msgid ""
"drop of the file into the FLATCAM GUI or through the menu/toolbar links "
"offered within the app"
msgstr ""
"drop of the file into the FLATCAM GUI or through the menu/toolbar links "
"offered within the app"

#: FlatCAMApp.py:10782
msgid ""
"Once an object is available in the Project Tab, by selecting it and then "
"focusing on"
msgstr ""
"Once an object is available in the Project Tab, by selecting it and then "
"focusing on"

#: FlatCAMApp.py:10783 FlatCAMApp.py:10784 FlatCAMApp.py:10787
#: FlatCAMApp.py:10790 FlatCAMApp.py:10794
msgid "SELECTED TAB"
msgstr "SELECTED TAB"

#: FlatCAMApp.py:10783
msgid "more simpler is to double click the object name in the Project Tab"
msgstr "more simpler is to double click the object name in the Project Tab"

#: FlatCAMApp.py:10784
msgid "will be updated with the object properties according to"
msgstr "will be updated with the object properties according to"

#: FlatCAMApp.py:10785
msgid "kind: Gerber, Excellon, Geometry or CNCJob object"
msgstr "kind: Gerber, Excellon, Geometry or CNCJob object"

#: FlatCAMApp.py:10786
msgid ""
"If the selection of the object is done on the canvas by single click "
"instead, and the"
msgstr ""
"If the selection of the object is done on the canvas by single click "
"instead, and the"

#: FlatCAMApp.py:10788
msgid ""
"is in focus, again the object properties will be displayed into the Selected "
"Tab. Alternatively, double clicking on the object on the canvas will bring "
"the"
msgstr ""
"is in focus, again the object properties will be displayed into the Selected "
"Tab. Alternatively, double clicking on the object on the canvas will bring "
"the"

#: FlatCAMApp.py:10790
msgid "and populate it even if it was out of focus"
msgstr "and populate it even if it was out of focus"

#: FlatCAMApp.py:10791
msgid ""
"You can change the parameters in this screen and the flow direction is like "
"this"
msgstr ""
"You can change the parameters in this screen and the flow direction is like "
"this"

#: FlatCAMApp.py:10792
msgid "Gerber/Excellon Object"
msgstr "Gerber/Excellon Object"

#: FlatCAMApp.py:10792
msgid "Change Parameter"
msgstr "Change Parameter"

#: FlatCAMApp.py:10792 flatcamTools/ToolNonCopperClear.py:444
msgid "Generate Geometry"
msgstr "Generate Geometry"

#: FlatCAMApp.py:10792 flatcamGUI/ObjectUI.py:895
msgid "Geometry Object"
msgstr "Geometry Object"

#: FlatCAMApp.py:10793
msgid "Add tools (change param in Selected Tab)"
msgstr "Add tools (change param in Selected Tab)"

#: FlatCAMApp.py:10793
msgid "Generate CNCJob"
msgstr "Generate CNCJob"

#: FlatCAMApp.py:10793
msgid "CNCJob Object"
msgstr "CNCJob Object"

#: FlatCAMApp.py:10794
msgid ""
"Verify GCode (through Edit CNC Code) and/or append/prepend to GCode (again, "
"done in"
msgstr ""
"Verify GCode (through Edit CNC Code) and/or append/prepend to GCode (again, "
"done in"

#: FlatCAMApp.py:10795 flatcamTools/ToolSolderPaste.py:375
msgid "Save GCode"
msgstr "Save GCode"

#: FlatCAMApp.py:10795
msgid "A list of key shortcuts is available through an menu entry in"
msgstr "A list of key shortcuts is available through an menu entry in"

#: FlatCAMApp.py:10795
msgid "Help"
msgstr "Help"

#: FlatCAMApp.py:10796
msgid "Shortcuts List"
msgstr "Shortcuts List"

#: FlatCAMApp.py:10796
msgid "or through"
msgstr "or through"

#: FlatCAMApp.py:10796
msgid "own key shortcut"
msgstr "own key shortcut"

#: FlatCAMApp.py:10854
msgid "Failed checking for latest version. Could not connect."
msgstr "Failed checking for latest version. Could not connect."

#: FlatCAMApp.py:10862
msgid "Could not parse information about latest version."
msgstr "Could not parse information about latest version."

#: FlatCAMApp.py:10873
msgid "FlatCAM is up to date!"
msgstr "FlatCAM is up to date!"

#: FlatCAMApp.py:10878
msgid "Newer Version Available"
msgstr "Newer Version Available"

#: FlatCAMApp.py:10879
msgid ""
"There is a newer version of FlatCAM available for download:\n"
"\n"
msgstr ""
"There is a newer version of FlatCAM available for download:\n"
"\n"

#: FlatCAMApp.py:10881
msgid "info"
msgstr "info"

#: FlatCAMApp.py:10936
msgid "All plots disabled."
msgstr "All plots disabled."

#: FlatCAMApp.py:10943
msgid "All non selected plots disabled."
msgstr "All non selected plots disabled."

#: FlatCAMApp.py:10950
msgid "All plots enabled."
msgstr "All plots enabled."

#: FlatCAMApp.py:10957
msgid "Selected plots enabled..."
msgstr "Selected plots enabled..."

#: FlatCAMApp.py:10966
msgid "Selected plots disabled..."
msgstr "Selected plots disabled..."

#: FlatCAMApp.py:10984
msgid "Enabling plots ..."
msgstr "Enabling plots ..."

#: FlatCAMApp.py:11023
msgid "Disabling plots ..."
msgstr "Disabling plots ..."

#: FlatCAMApp.py:11045
msgid "Working ..."
msgstr "Working ..."

#: FlatCAMApp.py:11084
msgid "Saving FlatCAM Project"
msgstr "Saving FlatCAM Project"

#: FlatCAMApp.py:11106 FlatCAMApp.py:11144
msgid "Project saved to"
msgstr "Project saved to"

#: FlatCAMApp.py:11126
msgid "Failed to verify project file"
msgstr "Failed to verify project file"

#: FlatCAMApp.py:11126 FlatCAMApp.py:11135 FlatCAMApp.py:11147
msgid "Retry to save it."
msgstr "Retry to save it."

#: FlatCAMApp.py:11135 FlatCAMApp.py:11147
msgid "Failed to parse saved project file"
msgstr "Failed to parse saved project file"

#: FlatCAMApp.py:11358
msgid "The user requested a graceful exit of the current task."
msgstr "The user requested a graceful exit of the current task."

#: FlatCAMObj.py:214
msgid "Name changed from"
msgstr "Name changed from"

#: FlatCAMObj.py:214
msgid "to"
msgstr "to"

#: FlatCAMObj.py:225
msgid "Offsetting..."
msgstr "Offsetting..."

#: FlatCAMObj.py:240
msgid "Scaling..."
msgstr "Scaling..."

#: FlatCAMObj.py:256
msgid "Skewing..."
msgstr "Skewing..."

#: FlatCAMObj.py:603 FlatCAMObj.py:2328 FlatCAMObj.py:3606
#: flatcamGUI/PreferencesUI.py:856 flatcamGUI/PreferencesUI.py:1808
msgid "Basic"
msgstr "Basic"

#: FlatCAMObj.py:603 FlatCAMObj.py:2328 FlatCAMObj.py:3606
#, python-format
#| msgid "<span style=\"color:green;\"><b>Basic</b></span>"
msgid "<span style=\"color:green;\"><b>%s</b></span>"
msgstr "<span style=\"color:green;\"><b>%s</b></span>"

#: FlatCAMObj.py:616 FlatCAMObj.py:2342 FlatCAMObj.py:3628
#: flatcamGUI/PreferencesUI.py:857
msgid "Advanced"
msgstr "Advanced"

#: FlatCAMObj.py:616 FlatCAMObj.py:2342 FlatCAMObj.py:3628
#, python-format
#| msgid "<span style=\"color:green;\"><b>Basic</b></span>"
msgid "<span style=\"color:red;\"><b>%s</b></span>"
msgstr "<span style=\"color:red;\"><b>%s</b></span>"

#: FlatCAMObj.py:805
msgid "Buffering solid geometry"
msgstr "Buffering solid geometry"

#: FlatCAMObj.py:808 camlib.py:604 flatcamGUI/PreferencesUI.py:1256
#: flatcamTools/ToolNonCopperClear.py:1541
#: flatcamTools/ToolNonCopperClear.py:1635
#: flatcamTools/ToolNonCopperClear.py:1647
#: flatcamTools/ToolNonCopperClear.py:1874
#: flatcamTools/ToolNonCopperClear.py:1966
#: flatcamTools/ToolNonCopperClear.py:1978
msgid "Buffering"
msgstr "Buffering"

#: FlatCAMObj.py:814
msgid "Done"
msgstr "Done"

#: FlatCAMObj.py:855 FlatCAMObj.py:871 FlatCAMObj.py:888
msgid "Isolating..."
msgstr "Isolating..."

#: FlatCAMObj.py:1092 FlatCAMObj.py:1208
#: flatcamTools/ToolNonCopperClear.py:1570
#: flatcamTools/ToolNonCopperClear.py:1898
msgid "Isolation geometry could not be generated."
msgstr "Isolation geometry could not be generated."

#: FlatCAMObj.py:1129 FlatCAMObj.py:3296 FlatCAMObj.py:3563 FlatCAMObj.py:3839
msgid "Rough"
msgstr "Rough"

#: FlatCAMObj.py:1154 FlatCAMObj.py:1231
msgid "Isolation geometry created"
msgstr "Isolation geometry created"

#: FlatCAMObj.py:1163 FlatCAMObj.py:1238
msgid "Subtracting Geo"
msgstr "Subtracting Geo"

#: FlatCAMObj.py:1417
msgid "Plotting Apertures"
msgstr "Plotting Apertures"

#: FlatCAMObj.py:2156 flatcamEditors/FlatCAMExcEditor.py:2309
msgid "Total Drills"
msgstr "Total Drills"

#: FlatCAMObj.py:2188 flatcamEditors/FlatCAMExcEditor.py:2341
msgid "Total Slots"
msgstr "Total Slots"

#: FlatCAMObj.py:2400 FlatCAMObj.py:3679 FlatCAMObj.py:3973 FlatCAMObj.py:4164
#: FlatCAMObj.py:4175 FlatCAMObj.py:4293 FlatCAMObj.py:4501 FlatCAMObj.py:4623
#: FlatCAMObj.py:4786 FlatCAMObj.py:5305
#: flatcamEditors/FlatCAMExcEditor.py:2416
#: flatcamEditors/FlatCAMGeoEditor.py:1081
#: flatcamEditors/FlatCAMGeoEditor.py:1118
#: flatcamEditors/FlatCAMGeoEditor.py:1139
#: flatcamEditors/FlatCAMGeoEditor.py:1160
#: flatcamEditors/FlatCAMGeoEditor.py:1197
#: flatcamEditors/FlatCAMGeoEditor.py:1229
#: flatcamEditors/FlatCAMGeoEditor.py:1250
#: flatcamEditors/FlatCAMGrbEditor.py:5319
#: flatcamEditors/FlatCAMGrbEditor.py:5362
#: flatcamEditors/FlatCAMGrbEditor.py:5389
#: flatcamEditors/FlatCAMGrbEditor.py:5416
#: flatcamEditors/FlatCAMGrbEditor.py:5457
#: flatcamEditors/FlatCAMGrbEditor.py:5495
#: flatcamEditors/FlatCAMGrbEditor.py:5521 flatcamTools/ToolCalculators.py:311
#: flatcamTools/ToolCalculators.py:322 flatcamTools/ToolCalculators.py:334
#: flatcamTools/ToolCalculators.py:349 flatcamTools/ToolCalculators.py:362
#: flatcamTools/ToolCalculators.py:376 flatcamTools/ToolCalculators.py:387
#: flatcamTools/ToolCalculators.py:398 flatcamTools/ToolCalculators.py:409
#: flatcamTools/ToolFilm.py:248 flatcamTools/ToolFilm.py:254
#: flatcamTools/ToolNonCopperClear.py:866
#: flatcamTools/ToolNonCopperClear.py:877
#: flatcamTools/ToolNonCopperClear.py:887
#: flatcamTools/ToolNonCopperClear.py:905
#: flatcamTools/ToolNonCopperClear.py:984
#: flatcamTools/ToolNonCopperClear.py:1066
#: flatcamTools/ToolNonCopperClear.py:1349
#: flatcamTools/ToolNonCopperClear.py:1381 flatcamTools/ToolPaint.py:703
#: flatcamTools/ToolPaint.py:778 flatcamTools/ToolPaint.py:926
#: flatcamTools/ToolPaint.py:980 flatcamTools/ToolPaint.py:1231
#: flatcamTools/ToolPaint.py:1507 flatcamTools/ToolPaint.py:1982
#: flatcamTools/ToolPanelize.py:397 flatcamTools/ToolPanelize.py:409
#: flatcamTools/ToolPanelize.py:422 flatcamTools/ToolPanelize.py:435
#: flatcamTools/ToolPanelize.py:447 flatcamTools/ToolPanelize.py:458
#: flatcamTools/ToolSolderPaste.py:764 flatcamTools/ToolSolderPaste.py:839
#: flatcamTools/ToolTransform.py:474 flatcamTools/ToolTransform.py:508
#: flatcamTools/ToolTransform.py:526 flatcamTools/ToolTransform.py:544
#: flatcamTools/ToolTransform.py:578 flatcamTools/ToolTransform.py:607
#: flatcamTools/ToolTransform.py:625
msgid "Wrong value format entered, use a number."
msgstr "Wrong value format entered, use a number."

#: FlatCAMObj.py:2641 FlatCAMObj.py:2733 FlatCAMObj.py:2854
msgid "Please select one or more tools from the list and try again."
msgstr "Please select one or more tools from the list and try again."

#: FlatCAMObj.py:2647
msgid "Milling tool for DRILLS is larger than hole size. Cancelled."
msgstr "Milling tool for DRILLS is larger than hole size. Cancelled."

#: FlatCAMObj.py:2662 FlatCAMObj.py:2755 FlatCAMObj.py:2873
msgid "Tool_nr"
msgstr "Tool_nr"

#: FlatCAMObj.py:2662 FlatCAMObj.py:2755 FlatCAMObj.py:2873
#: flatcamEditors/FlatCAMExcEditor.py:1500
#: flatcamEditors/FlatCAMExcEditor.py:3132 flatcamGUI/ObjectUI.py:617
#: flatcamTools/ToolNonCopperClear.py:107 flatcamTools/ToolPaint.py:106
#: flatcamTools/ToolPcbWizard.py:76 flatcamTools/ToolSolderPaste.py:81
msgid "Diameter"
msgstr "Diameter"

#: FlatCAMObj.py:2662 FlatCAMObj.py:2755 FlatCAMObj.py:2873
msgid "Drills_Nr"
msgstr "Drills_Nr"

#: FlatCAMObj.py:2662 FlatCAMObj.py:2755 FlatCAMObj.py:2873
msgid "Slots_Nr"
msgstr "Slots_Nr"

#: FlatCAMObj.py:2742
msgid "Milling tool for SLOTS is larger than hole size. Cancelled."
msgstr "Milling tool for SLOTS is larger than hole size. Cancelled."

#: FlatCAMObj.py:2914 FlatCAMObj.py:4999
msgid ""
"Wrong value format for self.defaults[\"z_pdepth\"] or self.options[\"z_pdepth"
"\"]"
msgstr ""
"Wrong value format for self.defaults[\"z_pdepth\"] or self.options[\"z_pdepth"
"\"]"

#: FlatCAMObj.py:2925 FlatCAMObj.py:5010
msgid ""
"Wrong value format for self.defaults[\"feedrate_probe\"] or self."
"options[\"feedrate_probe\"]"
msgstr ""
"Wrong value format for self.defaults[\"feedrate_probe\"] or self."
"options[\"feedrate_probe\"]"

#: FlatCAMObj.py:2955 FlatCAMObj.py:4885 FlatCAMObj.py:4891 FlatCAMObj.py:5045
msgid "Generating CNC Code"
msgstr "Generating CNC Code"

#: FlatCAMObj.py:2981 camlib.py:5749 camlib.py:6733
msgid ""
"The Toolchange X,Y field in Edit -> Preferences has to be in the format (x, "
"y) \n"
"but now there is only one value, not two. "
msgstr ""
"The Toolchange X,Y field in Edit -> Preferences has to be in the format (x, "
"y) \n"
"but now there is only one value, not two. "

#: FlatCAMObj.py:3296 FlatCAMObj.py:4215 FlatCAMObj.py:4216 FlatCAMObj.py:4225
msgid "Iso"
msgstr "Iso"

#: FlatCAMObj.py:3296
msgid "Finish"
msgstr "Finish"

#: FlatCAMObj.py:3599 flatcamGUI/FlatCAMGUI.py:551 flatcamGUI/FlatCAMGUI.py:758
#: flatcamGUI/FlatCAMGUI.py:1691 flatcamGUI/FlatCAMGUI.py:1788
#: flatcamGUI/FlatCAMGUI.py:2192 flatcamGUI/ObjectUI.py:1066
#: flatcamTools/ToolPanelize.py:540 flatcamTools/ToolPanelize.py:567
#: flatcamTools/ToolPanelize.py:667 flatcamTools/ToolPanelize.py:701
#: flatcamTools/ToolPanelize.py:766
msgid "Copy"
msgstr "Copy"

#: FlatCAMObj.py:3810
msgid "Please enter the desired tool diameter in Float format."
msgstr "Please enter the desired tool diameter in Float format."

#: FlatCAMObj.py:3884
msgid "Tool added in Tool Table."
msgstr "Tool added in Tool Table."

#: FlatCAMObj.py:3888
msgid "Default Tool added. Wrong value format entered."
msgstr "Default Tool added. Wrong value format entered."

#: FlatCAMObj.py:3921 FlatCAMObj.py:3930
msgid "Failed. Select a tool to copy."
msgstr "Failed. Select a tool to copy."

#: FlatCAMObj.py:3958
msgid "Tool was copied in Tool Table."
msgstr "Tool was copied in Tool Table."

#: FlatCAMObj.py:3988
msgid "Tool was edited in Tool Table."
msgstr "Tool was edited in Tool Table."

#: FlatCAMObj.py:4017 FlatCAMObj.py:4026
msgid "Failed. Select a tool to delete."
msgstr "Failed. Select a tool to delete."

#: FlatCAMObj.py:4049
msgid "Tool was deleted in Tool Table."
msgstr "Tool was deleted in Tool Table."

#: FlatCAMObj.py:4481
msgid "This Geometry can't be processed because it is"
msgstr "This Geometry can't be processed because it is"

#: FlatCAMObj.py:4483 flatcamTools/ToolSub.py:314 flatcamTools/ToolSub.py:523
msgid "geometry"
msgstr "geometry"

#: FlatCAMObj.py:4526
msgid "Failed. No tool selected in the tool table ..."
msgstr "Failed. No tool selected in the tool table ..."

#: FlatCAMObj.py:4567
msgid "FlatCAMObj.FlatCAMGeometry.mtool_gen_cncjob() -->"
msgstr "FlatCAMObj.FlatCAMGeometry.mtool_gen_cncjob() -->"

#: FlatCAMObj.py:4628 FlatCAMObj.py:4792
msgid ""
"Tool Offset is selected in Tool Table but no value is provided.\n"
"Add a Tool Offset or change the Offset Type."
msgstr ""
"Tool Offset is selected in Tool Table but no value is provided.\n"
"Add a Tool Offset or change the Offset Type."

#: FlatCAMObj.py:4693 FlatCAMObj.py:4852
msgid "G-Code parsing in progress..."
msgstr "G-Code parsing in progress..."

#: FlatCAMObj.py:4695 FlatCAMObj.py:4854
msgid "G-Code parsing finished..."
msgstr "G-Code parsing finished..."

#: FlatCAMObj.py:4703
msgid "Finished G-Code processing"
msgstr "Finished G-Code processing"

#: FlatCAMObj.py:4705 FlatCAMObj.py:4866
msgid "G-Code processing failed with error"
msgstr "G-Code processing failed with error"

#: FlatCAMObj.py:4753 flatcamTools/ToolSolderPaste.py:1187
msgid "Cancelled. Empty file, it has no geometry"
msgstr "Cancelled. Empty file, it has no geometry"

#: FlatCAMObj.py:4864 FlatCAMObj.py:5038
msgid "Finished G-Code processing..."
msgstr "Finished G-Code processing..."

#: FlatCAMObj.py:4888 FlatCAMObj.py:4894 FlatCAMObj.py:5048
msgid "CNCjob created"
msgstr "CNCjob created"

#: FlatCAMObj.py:5080 FlatCAMObj.py:5090 camlib.py:3671 camlib.py:3681
msgid "Scale factor has to be a number: integer or float."
msgstr "Scale factor has to be a number: integer or float."

#: FlatCAMObj.py:5164
msgid "Geometry Scale done."
msgstr "Geometry Scale done."

#: FlatCAMObj.py:5181 camlib.py:3775
msgid ""
"An (x,y) pair of values are needed. Probable you entered only one value in "
"the Offset field."
msgstr ""
"An (x,y) pair of values are needed. Probable you entered only one value in "
"the Offset field."

#: FlatCAMObj.py:5235
msgid "Geometry Offset done."
msgstr "Geometry Offset done."

#: FlatCAMObj.py:5264
msgid ""
"The Toolchange X,Y field in Edit -> Preferences has to be in the format (x, "
"y)\n"
"but now there is only one value, not two."
msgstr ""
"The Toolchange X,Y field in Edit -> Preferences has to be in the format (x, "
"y)\n"
"but now there is only one value, not two."

#: FlatCAMObj.py:5737
msgid "<span style=\"color:green;\"><b>Basic</b></span>"
msgstr "<span style=\"color:green;\"><b>Basic</b></span>"

#: FlatCAMObj.py:5743
msgid "<span style=\"color:red;\"><b>Advanced</b></span>"
msgstr "<span style=\"color:red;\"><b>Advanced</b></span>"

#: FlatCAMObj.py:5786
msgid "Plotting..."
msgstr "Plotting..."

#: FlatCAMObj.py:5810 FlatCAMObj.py:5815 flatcamTools/ToolSolderPaste.py:1393
msgid "Export Machine Code ..."
msgstr "Export Machine Code ..."

#: FlatCAMObj.py:5821 flatcamTools/ToolSolderPaste.py:1397
msgid "Export Machine Code cancelled ..."
msgstr "Export Machine Code cancelled ..."

#: FlatCAMObj.py:5839
msgid "Machine Code file saved to"
msgstr "Machine Code file saved to"

#: FlatCAMObj.py:5864
msgid "FlatCAMCNNJob.on_edit_code_click() -->"
msgstr "FlatCAMCNNJob.on_edit_code_click() -->"

#: FlatCAMObj.py:5872
msgid "Loaded Machine Code into Code Editor"
msgstr "Loaded Machine Code into Code Editor"

#: FlatCAMObj.py:5984
msgid "This CNCJob object can't be processed because it is a"
msgstr "This CNCJob object can't be processed because it is a"

#: FlatCAMObj.py:5986
msgid "CNCJob object"
msgstr "CNCJob object"

#: FlatCAMObj.py:6038
msgid "G-code does not have a units code: either G20 or G21"
msgstr "G-code does not have a units code: either G20 or G21"

#: FlatCAMObj.py:6050
msgid "Cancelled. The Toolchange Custom code is enabled but it's empty."
msgstr "Cancelled. The Toolchange Custom code is enabled but it's empty."

#: FlatCAMObj.py:6056
msgid "Toolchange G-code was replaced by a custom code."
msgstr "Toolchange G-code was replaced by a custom code."

#: FlatCAMObj.py:6093 FlatCAMObj.py:6103
msgid ""
"The used postprocessor file has to have in it's name: 'toolchange_custom'"
msgstr ""
"The used postprocessor file has to have in it's name: 'toolchange_custom'"

#: FlatCAMObj.py:6107
msgid "There is no postprocessor file."
msgstr "There is no postprocessor file."

#: FlatCAMProcess.py:172
msgid "processes running."
msgstr "processes running."

#: FlatCAMTranslation.py:91
msgid "The application will restart."
msgstr "The application will restart."

#: FlatCAMTranslation.py:93
msgid "Are you sure do you want to change the current language to"
msgstr "Are you sure do you want to change the current language to"

#: FlatCAMTranslation.py:94
msgid "Apply Language ..."
msgstr "Apply Language ..."

#: ObjectCollection.py:426
#, python-brace-format
msgid "Object renamed from <b>{old}</b> to <b>{new}</b>"
msgstr "Object renamed from <b>{old}</b> to <b>{new}</b>"

#: ObjectCollection.py:766
msgid "Cause of error"
msgstr "Cause of error"

#: camlib.py:215
msgid "self.solid_geometry is neither BaseGeometry or list."
msgstr "self.solid_geometry is neither BaseGeometry or list."

#: camlib.py:594
msgid "Pass"
msgstr "Pass"

#: camlib.py:614
msgid "Get Exteriors"
msgstr "Get Exteriors"

#: camlib.py:617
msgid "Get Interiors"
msgstr "Get Interiors"

#: camlib.py:1539
msgid "Object was mirrored"
msgstr "Object was mirrored"

#: camlib.py:1542
msgid "Failed to mirror. No object selected"
msgstr "Failed to mirror. No object selected"

#: camlib.py:1611
msgid "Object was rotated"
msgstr "Object was rotated"

#: camlib.py:1614
msgid "Failed to rotate. No object selected"
msgstr "Failed to rotate. No object selected"

#: camlib.py:1682
msgid "Object was skewed"
msgstr "Object was skewed"

#: camlib.py:1685
msgid "Failed to skew. No object selected"
msgstr "Failed to skew. No object selected"

#: camlib.py:2462
msgid "Gerber processing. Parsing"
msgstr "Gerber processing. Parsing"

#: camlib.py:2462
msgid "lines"
msgstr "lines"

#: camlib.py:2983 camlib.py:3079
msgid "Coordinates missing, line ignored"
msgstr "Coordinates missing, line ignored"

#: camlib.py:2985 camlib.py:3081
msgid "GERBER file might be CORRUPT. Check the file !!!"
msgstr "GERBER file might be CORRUPT. Check the file !!!"

#: camlib.py:3035
msgid ""
"Region does not have enough points. File will be processed but there are "
"parser errors. Line number"
msgstr ""
"Region does not have enough points. File will be processed but there are "
"parser errors. Line number"

#: camlib.py:3433
msgid "Gerber processing. Joining"
msgstr "Gerber processing. Joining"

#: camlib.py:3433
msgid "polygons"
msgstr "polygons"

#: camlib.py:3450
msgid "Gerber processing. Applying Gerber polarity."
msgstr "Gerber processing. Applying Gerber polarity."

#: camlib.py:3489
msgid "Gerber Line"
msgstr "Gerber Line"

#: camlib.py:3489
msgid "Gerber Line Content"
msgstr "Gerber Line Content"

#: camlib.py:3491
msgid "Gerber Parser ERROR"
msgstr "Gerber Parser ERROR"

#: camlib.py:3739
msgid "Gerber Scale done."
msgstr "Gerber Scale done."

#: camlib.py:3829
msgid "Gerber Offset done."
msgstr "Gerber Offset done."

#: camlib.py:3906
msgid "Gerber Mirror done."
msgstr "Gerber Mirror done."

#: camlib.py:3975
msgid "Gerber Skew done."
msgstr "Gerber Skew done."

#: camlib.py:4036
msgid "Gerber Rotate done."
msgstr "Gerber Rotate done."

#: camlib.py:4323
msgid "This is GCODE mark"
msgstr "This is GCODE mark"

#: camlib.py:4439
msgid ""
"No tool diameter info's. See shell.\n"
"A tool change event: T"
msgstr ""
"No tool diameter info's. See shell.\n"
"A tool change event: T"

#: camlib.py:4442
msgid ""
"was found but the Excellon file have no informations regarding the tool "
"diameters therefore the application will try to load it by using some 'fake' "
"diameters.\n"
"The user needs to edit the resulting Excellon object and change the "
"diameters to reflect the real diameters."
msgstr ""
"was found but the Excellon file have no informations regarding the tool "
"diameters therefore the application will try to load it by using some 'fake' "
"diameters.\n"
"The user needs to edit the resulting Excellon object and change the "
"diameters to reflect the real diameters."

#: camlib.py:4897
#, python-brace-format
msgid ""
"{e_code} Excellon Parser error.\n"
"Parsing Failed. Line {l_nr}: {line}\n"
msgstr ""
"{e_code} Excellon Parser error.\n"
"Parsing Failed. Line {l_nr}: {line}\n"

#: camlib.py:4980
msgid ""
"Excellon.create_geometry() -> a drill location was skipped due of not having "
"a tool associated.\n"
"Check the resulting GCode."
msgstr ""
"Excellon.create_geometry() -> a drill location was skipped due of not having "
"a tool associated.\n"
"Check the resulting GCode."

#: camlib.py:5654
msgid "There is no such parameter"
msgstr "There is no such parameter"

#: camlib.py:5726
msgid ""
"The Cut Z parameter has positive value. It is the depth value to drill into "
"material.\n"
"The Cut Z parameter needs to have a negative value, assuming it is a typo "
"therefore the app will convert the value to negative. Check the resulting "
"CNC code (Gcode etc)."
msgstr ""
"The Cut Z parameter has positive value. It is the depth value to drill into "
"material.\n"
"The Cut Z parameter needs to have a negative value, assuming it is a typo "
"therefore the app will convert the value to negative. Check the resulting "
"CNC code (Gcode etc)."

#: camlib.py:5734 camlib.py:6409 camlib.py:6759
msgid "The Cut Z parameter is zero. There will be no cut, skipping file"
msgstr "The Cut Z parameter is zero. There will be no cut, skipping file"

#: camlib.py:5786
msgid "Creating a list of points to drill..."
msgstr "Creating a list of points to drill..."

#: camlib.py:5869
msgid "Starting G-Code"
msgstr "Starting G-Code"

#: camlib.py:5967 camlib.py:6114 camlib.py:6219 camlib.py:6525 camlib.py:6873
msgid "Starting G-Code for tool with diameter"
msgstr "Starting G-Code for tool with diameter"

#: camlib.py:6024 camlib.py:6171 camlib.py:6277
msgid "G91 coordinates not implemented"
msgstr "G91 coordinates not implemented"

#: camlib.py:6030 camlib.py:6177 camlib.py:6283
msgid "The loaded Excellon file has no drills"
msgstr "The loaded Excellon file has no drills"

#: camlib.py:6305
msgid "Finished G-Code generation..."
msgstr "Finished G-Code generation..."

#: camlib.py:6382
msgid ""
"The Toolchange X,Y field in Edit -> Preferences has to be in the format (x, "
"y) \n"
"but now there is only one value, not two."
msgstr ""
"The Toolchange X,Y field in Edit -> Preferences has to be in the format (x, "
"y) \n"
"but now there is only one value, not two."

#: camlib.py:6395 camlib.py:6745
msgid ""
"Cut_Z parameter is None or zero. Most likely a bad combinations of other "
"parameters."
msgstr ""
"Cut_Z parameter is None or zero. Most likely a bad combinations of other "
"parameters."

#: camlib.py:6401 camlib.py:6751
msgid ""
"The Cut Z parameter has positive value. It is the depth value to cut into "
"material.\n"
"The Cut Z parameter needs to have a negative value, assuming it is a typo "
"therefore the app will convert the value to negative.Check the resulting CNC "
"code (Gcode etc)."
msgstr ""
"The Cut Z parameter has positive value. It is the depth value to cut into "
"material.\n"
"The Cut Z parameter needs to have a negative value, assuming it is a typo "
"therefore the app will convert the value to negative.Check the resulting CNC "
"code (Gcode etc)."

#: camlib.py:6419 camlib.py:6765
msgid "Travel Z parameter is None or zero."
msgstr "Travel Z parameter is None or zero."

#: camlib.py:6424 camlib.py:6770
msgid ""
"The Travel Z parameter has negative value. It is the height value to travel "
"between cuts.\n"
"The Z Travel parameter needs to have a positive value, assuming it is a typo "
"therefore the app will convert the value to positive.Check the resulting CNC "
"code (Gcode etc)."
msgstr ""
"The Travel Z parameter has negative value. It is the height value to travel "
"between cuts.\n"
"The Z Travel parameter needs to have a positive value, assuming it is a typo "
"therefore the app will convert the value to positive.Check the resulting CNC "
"code (Gcode etc)."

#: camlib.py:6432 camlib.py:6778
msgid "The Z Travel parameter is zero. This is dangerous, skipping file"
msgstr "The Z Travel parameter is zero. This is dangerous, skipping file"

#: camlib.py:6447 camlib.py:6797
msgid "Indexing geometry before generating G-Code..."
msgstr "Indexing geometry before generating G-Code..."

#: camlib.py:6508 camlib.py:6859
msgid "Starting G-Code..."
msgstr "Starting G-Code..."

#: camlib.py:6595 camlib.py:6943
msgid "Finished G-Code generation"
msgstr "Finished G-Code generation"

#: camlib.py:6597
msgid "paths traced"
msgstr "paths traced"

#: camlib.py:6633
msgid "Expected a Geometry, got"
msgstr "Expected a Geometry, got"

#: camlib.py:6640
msgid ""
"Trying to generate a CNC Job from a Geometry object without solid_geometry."
msgstr ""
"Trying to generate a CNC Job from a Geometry object without solid_geometry."

#: camlib.py:6680
msgid ""
"The Tool Offset value is too negative to use for the current_geometry.\n"
"Raise the value (in module) and try again."
msgstr ""
"The Tool Offset value is too negative to use for the current_geometry.\n"
"Raise the value (in module) and try again."

#: camlib.py:6945
msgid " paths traced."
msgstr " paths traced."

#: camlib.py:6974
msgid "There is no tool data in the SolderPaste geometry."
msgstr "There is no tool data in the SolderPaste geometry."

#: camlib.py:7061
msgid "Finished SolderPste G-Code generation"
msgstr "Finished SolderPste G-Code generation"

#: camlib.py:7063
msgid "paths traced."
msgstr "paths traced."

#: camlib.py:7536 camlib.py:7814 camlib.py:7917 camlib.py:7964
msgid "G91 coordinates not implemented ..."
msgstr "G91 coordinates not implemented ..."

#: flatcamEditors/FlatCAMExcEditor.py:45 flatcamEditors/FlatCAMExcEditor.py:70
#: flatcamEditors/FlatCAMExcEditor.py:152
#: flatcamEditors/FlatCAMExcEditor.py:356
#: flatcamEditors/FlatCAMExcEditor.py:548
#: flatcamEditors/FlatCAMGrbEditor.py:238
#: flatcamEditors/FlatCAMGrbEditor.py:243
msgid "Click to place ..."
msgstr "Click to place ..."

#: flatcamEditors/FlatCAMExcEditor.py:54
msgid "To add a drill first select a tool"
msgstr "To add a drill first select a tool"

#: flatcamEditors/FlatCAMExcEditor.py:117
msgid "Done. Drill added."
msgstr "Done. Drill added."

#: flatcamEditors/FlatCAMExcEditor.py:160
msgid "To add an Drill Array first select a tool in Tool Table"
msgstr "To add an Drill Array first select a tool in Tool Table"

#: flatcamEditors/FlatCAMExcEditor.py:176
#: flatcamEditors/FlatCAMExcEditor.py:386
#: flatcamEditors/FlatCAMExcEditor.py:596
#: flatcamEditors/FlatCAMExcEditor.py:1098
#: flatcamEditors/FlatCAMExcEditor.py:1123
#: flatcamEditors/FlatCAMGrbEditor.py:462
#: flatcamEditors/FlatCAMGrbEditor.py:1859
#: flatcamEditors/FlatCAMGrbEditor.py:1887
msgid "Click on target location ..."
msgstr "Click on target location ..."

#: flatcamEditors/FlatCAMExcEditor.py:193
msgid "Click on the Drill Circular Array Start position"
msgstr "Click on the Drill Circular Array Start position"

#: flatcamEditors/FlatCAMExcEditor.py:215
#: flatcamEditors/FlatCAMExcEditor.py:635
#: flatcamEditors/FlatCAMGrbEditor.py:505
msgid "The value is not Float. Check for comma instead of dot separator."
msgstr "The value is not Float. Check for comma instead of dot separator."

#: flatcamEditors/FlatCAMExcEditor.py:219
msgid "The value is mistyped. Check the value"
msgstr "The value is mistyped. Check the value"

#: flatcamEditors/FlatCAMExcEditor.py:318
msgid "Too many drills for the selected spacing angle."
msgstr "Too many drills for the selected spacing angle."

#: flatcamEditors/FlatCAMExcEditor.py:336
msgid "Done. Drill Array added."
msgstr "Done. Drill Array added."

#: flatcamEditors/FlatCAMExcEditor.py:365
msgid "To add a slot first select a tool"
msgstr "To add a slot first select a tool"

#: flatcamEditors/FlatCAMExcEditor.py:423
#: flatcamEditors/FlatCAMExcEditor.py:430
#: flatcamEditors/FlatCAMExcEditor.py:701
#: flatcamEditors/FlatCAMExcEditor.py:708
msgid "Value is missing or wrong format. Add it and retry."
msgstr "Value is missing or wrong format. Add it and retry."

#: flatcamEditors/FlatCAMExcEditor.py:529
msgid "Done. Adding Slot completed."
msgstr "Done. Adding Slot completed."

#: flatcamEditors/FlatCAMExcEditor.py:556
msgid "To add an Slot Array first select a tool in Tool Table"
msgstr "To add an Slot Array first select a tool in Tool Table"

#: flatcamEditors/FlatCAMExcEditor.py:613
msgid "Click on the Slot Circular Array Start position"
msgstr "Click on the Slot Circular Array Start position"

#: flatcamEditors/FlatCAMExcEditor.py:639
#: flatcamEditors/FlatCAMGrbEditor.py:509
msgid "The value is mistyped. Check the value."
msgstr "The value is mistyped. Check the value."

#: flatcamEditors/FlatCAMExcEditor.py:818
msgid "Too many Slots for the selected spacing angle."
msgstr "Too many Slots for the selected spacing angle."

#: flatcamEditors/FlatCAMExcEditor.py:841
msgid "Done. Slot Array added."
msgstr "Done. Slot Array added."

#: flatcamEditors/FlatCAMExcEditor.py:858
msgid "Click on the Drill(s) to resize ..."
msgstr "Click on the Drill(s) to resize ..."

#: flatcamEditors/FlatCAMExcEditor.py:888
msgid "Resize drill(s) failed. Please enter a diameter for resize."
msgstr "Resize drill(s) failed. Please enter a diameter for resize."

#: flatcamEditors/FlatCAMExcEditor.py:978
#: flatcamEditors/FlatCAMExcEditor.py:1048 flatcamGUI/FlatCAMGUI.py:2685
#: flatcamGUI/FlatCAMGUI.py:2893 flatcamGUI/FlatCAMGUI.py:3107
msgid "Cancelled."
msgstr "Cancelled."

#: flatcamEditors/FlatCAMExcEditor.py:1069
msgid "Done. Drill/Slot Resize completed."
msgstr "Done. Drill/Slot Resize completed."

#: flatcamEditors/FlatCAMExcEditor.py:1072
msgid "Cancelled. No drills/slots selected for resize ..."
msgstr "Cancelled. No drills/slots selected for resize ..."

#: flatcamEditors/FlatCAMExcEditor.py:1100
#: flatcamEditors/FlatCAMGrbEditor.py:1861
msgid "Click on reference location ..."
msgstr "Click on reference location ..."

#: flatcamEditors/FlatCAMExcEditor.py:1156
msgid "Done. Drill(s) Move completed."
msgstr "Done. Drill(s) Move completed."

#: flatcamEditors/FlatCAMExcEditor.py:1254
msgid "Done. Drill(s) copied."
msgstr "Done. Drill(s) copied."

#: flatcamEditors/FlatCAMExcEditor.py:1473 flatcamGUI/PreferencesUI.py:2315
msgid "Excellon Editor"
msgstr "Excellon Editor"

#: flatcamEditors/FlatCAMExcEditor.py:1480
#: flatcamEditors/FlatCAMGrbEditor.py:2361
msgid "Name:"
msgstr "Name:"

#: flatcamEditors/FlatCAMExcEditor.py:1486 flatcamGUI/ObjectUI.py:597
#: flatcamGUI/ObjectUI.py:924 flatcamTools/ToolNonCopperClear.py:96
#: flatcamTools/ToolPaint.py:95 flatcamTools/ToolSolderPaste.py:70
msgid "Tools Table"
msgstr "Tools Table"

#: flatcamEditors/FlatCAMExcEditor.py:1488 flatcamGUI/ObjectUI.py:599
msgid ""
"Tools in this Excellon object\n"
"when are used for drilling."
msgstr ""
"Tools in this Excellon object\n"
"when are used for drilling."

#: flatcamEditors/FlatCAMExcEditor.py:1508
msgid "Add/Delete Tool"
msgstr "Add/Delete Tool"

#: flatcamEditors/FlatCAMExcEditor.py:1510
msgid ""
"Add/Delete a tool to the tool list\n"
"for this Excellon object."
msgstr ""
"Add/Delete a tool to the tool list\n"
"for this Excellon object."

#: flatcamEditors/FlatCAMExcEditor.py:1518 flatcamGUI/ObjectUI.py:1042
#: flatcamTools/ToolNonCopperClear.py:212 flatcamTools/ToolPaint.py:162
msgid "Tool Dia"
msgstr "Tool Dia"

#: flatcamEditors/FlatCAMExcEditor.py:1520 flatcamGUI/ObjectUI.py:1045
#: flatcamGUI/PreferencesUI.py:2344
msgid "Diameter for the new tool"
msgstr "Diameter for the new tool"

#: flatcamEditors/FlatCAMExcEditor.py:1528
msgid "Add Tool"
msgstr "Add Tool"

#: flatcamEditors/FlatCAMExcEditor.py:1530
msgid ""
"Add a new tool to the tool list\n"
"with the diameter specified above."
msgstr ""
"Add a new tool to the tool list\n"
"with the diameter specified above."

#: flatcamEditors/FlatCAMExcEditor.py:1542
msgid "Delete Tool"
msgstr "Delete Tool"

#: flatcamEditors/FlatCAMExcEditor.py:1544
msgid ""
"Delete a tool in the tool list\n"
"by selecting a row in the tool table."
msgstr ""
"Delete a tool in the tool list\n"
"by selecting a row in the tool table."

#: flatcamEditors/FlatCAMExcEditor.py:1562 flatcamGUI/FlatCAMGUI.py:1581
msgid "Resize Drill(s)"
msgstr "Resize Drill(s)"

#: flatcamEditors/FlatCAMExcEditor.py:1564
msgid "Resize a drill or a selection of drills."
msgstr "Resize a drill or a selection of drills."

#: flatcamEditors/FlatCAMExcEditor.py:1571
msgid "Resize Dia"
msgstr "Resize Dia"

#: flatcamEditors/FlatCAMExcEditor.py:1573
msgid "Diameter to resize to."
msgstr "Diameter to resize to."

#: flatcamEditors/FlatCAMExcEditor.py:1581
msgid "Resize"
msgstr "Resize"

#: flatcamEditors/FlatCAMExcEditor.py:1583
msgid "Resize drill(s)"
msgstr "Resize drill(s)"

#: flatcamEditors/FlatCAMExcEditor.py:1608 flatcamGUI/FlatCAMGUI.py:1580
#: flatcamGUI/FlatCAMGUI.py:1780
msgid "Add Drill Array"
msgstr "Add Drill Array"

#: flatcamEditors/FlatCAMExcEditor.py:1610
msgid "Add an array of drills (linear or circular array)"
msgstr "Add an array of drills (linear or circular array)"

#: flatcamEditors/FlatCAMExcEditor.py:1616
msgid ""
"Select the type of drills array to create.\n"
"It can be Linear X(Y) or Circular"
msgstr ""
"Select the type of drills array to create.\n"
"It can be Linear X(Y) or Circular"

#: flatcamEditors/FlatCAMExcEditor.py:1619
#: flatcamEditors/FlatCAMExcEditor.py:1821
#: flatcamEditors/FlatCAMGrbEditor.py:2647
msgid "Linear"
msgstr "Linear"

#: flatcamEditors/FlatCAMExcEditor.py:1620
#: flatcamEditors/FlatCAMExcEditor.py:1822
#: flatcamEditors/FlatCAMGrbEditor.py:2648 flatcamGUI/PreferencesUI.py:3290
#: flatcamTools/ToolNonCopperClear.py:203
msgid "Circular"
msgstr "Circular"

#: flatcamEditors/FlatCAMExcEditor.py:1628 flatcamGUI/PreferencesUI.py:2354
msgid "Nr of drills"
msgstr "Nr of drills"

#: flatcamEditors/FlatCAMExcEditor.py:1629 flatcamGUI/PreferencesUI.py:2356
msgid "Specify how many drills to be in the array."
msgstr "Specify how many drills to be in the array."

#: flatcamEditors/FlatCAMExcEditor.py:1646
#: flatcamEditors/FlatCAMExcEditor.py:1693
#: flatcamEditors/FlatCAMExcEditor.py:1757
#: flatcamEditors/FlatCAMExcEditor.py:1848
#: flatcamEditors/FlatCAMExcEditor.py:1895
#: flatcamEditors/FlatCAMGrbEditor.py:1523
#: flatcamEditors/FlatCAMGrbEditor.py:2674
#: flatcamEditors/FlatCAMGrbEditor.py:2719 flatcamGUI/PreferencesUI.py:2448
msgid "Direction"
msgstr "Direction"

#: flatcamEditors/FlatCAMExcEditor.py:1648
#: flatcamEditors/FlatCAMExcEditor.py:1850
#: flatcamEditors/FlatCAMGrbEditor.py:2676 flatcamGUI/PreferencesUI.py:1504
#: flatcamGUI/PreferencesUI.py:2371 flatcamGUI/PreferencesUI.py:2502
msgid ""
"Direction on which the linear array is oriented:\n"
"- 'X' - horizontal axis \n"
"- 'Y' - vertical axis or \n"
"- 'Angle' - a custom angle for the array inclination"
msgstr ""
"Direction on which the linear array is oriented:\n"
"- 'X' - horizontal axis \n"
"- 'Y' - vertical axis or \n"
"- 'Angle' - a custom angle for the array inclination"

#: flatcamEditors/FlatCAMExcEditor.py:1655
#: flatcamEditors/FlatCAMExcEditor.py:1766
#: flatcamEditors/FlatCAMExcEditor.py:1857
#: flatcamEditors/FlatCAMGrbEditor.py:2683 flatcamGUI/PreferencesUI.py:1510
#: flatcamGUI/PreferencesUI.py:2377 flatcamGUI/PreferencesUI.py:2457
#: flatcamGUI/PreferencesUI.py:2508
msgid "X"
msgstr "X"

#: flatcamEditors/FlatCAMExcEditor.py:1656
#: flatcamEditors/FlatCAMExcEditor.py:1767
#: flatcamEditors/FlatCAMExcEditor.py:1858
#: flatcamEditors/FlatCAMGrbEditor.py:2684 flatcamGUI/PreferencesUI.py:1511
#: flatcamGUI/PreferencesUI.py:2378 flatcamGUI/PreferencesUI.py:2458
#: flatcamGUI/PreferencesUI.py:2509
msgid "Y"
msgstr "Y"

#: flatcamEditors/FlatCAMExcEditor.py:1657
#: flatcamEditors/FlatCAMExcEditor.py:1671
#: flatcamEditors/FlatCAMExcEditor.py:1705
#: flatcamEditors/FlatCAMExcEditor.py:1768
#: flatcamEditors/FlatCAMExcEditor.py:1772
#: flatcamEditors/FlatCAMExcEditor.py:1859
#: flatcamEditors/FlatCAMExcEditor.py:1873
#: flatcamEditors/FlatCAMExcEditor.py:1907
#: flatcamEditors/FlatCAMGrbEditor.py:2685
#: flatcamEditors/FlatCAMGrbEditor.py:2698
#: flatcamEditors/FlatCAMGrbEditor.py:2734 flatcamGUI/PreferencesUI.py:1512
#: flatcamGUI/PreferencesUI.py:1529 flatcamGUI/PreferencesUI.py:2379
#: flatcamGUI/PreferencesUI.py:2396 flatcamGUI/PreferencesUI.py:2459
#: flatcamGUI/PreferencesUI.py:2464 flatcamGUI/PreferencesUI.py:2510
#: flatcamGUI/PreferencesUI.py:2527 flatcamTools/ToolTransform.py:68
msgid "Angle"
msgstr "Angle"

#: flatcamEditors/FlatCAMExcEditor.py:1661
#: flatcamEditors/FlatCAMExcEditor.py:1863
#: flatcamEditors/FlatCAMGrbEditor.py:2689 flatcamGUI/PreferencesUI.py:1518
#: flatcamGUI/PreferencesUI.py:2385 flatcamGUI/PreferencesUI.py:2516
msgid "Pitch"
msgstr "Pitch"

#: flatcamEditors/FlatCAMExcEditor.py:1663
#: flatcamEditors/FlatCAMExcEditor.py:1865
#: flatcamEditors/FlatCAMGrbEditor.py:2691 flatcamGUI/PreferencesUI.py:1520
#: flatcamGUI/PreferencesUI.py:2387 flatcamGUI/PreferencesUI.py:2518
msgid "Pitch = Distance between elements of the array."
msgstr "Pitch = Distance between elements of the array."

#: flatcamEditors/FlatCAMExcEditor.py:1673
#: flatcamEditors/FlatCAMExcEditor.py:1875
#: flatcamEditors/FlatCAMGrbEditor.py:2700
msgid ""
"Angle at which the linear array is placed.\n"
"The precision is of max 2 decimals.\n"
"Min value is: -359.99 degrees.\n"
"Max value is:  360.00 degrees."
msgstr ""
"Angle at which the linear array is placed.\n"
"The precision is of max 2 decimals.\n"
"Min value is: -359.99 degrees.\n"
"Max value is:  360.00 degrees."

#: flatcamEditors/FlatCAMExcEditor.py:1694
#: flatcamEditors/FlatCAMExcEditor.py:1896
#: flatcamEditors/FlatCAMGrbEditor.py:2721
msgid ""
"Direction for circular array.Can be CW = clockwise or CCW = counter "
"clockwise."
msgstr ""
"Direction for circular array.Can be CW = clockwise or CCW = counter "
"clockwise."

#: flatcamEditors/FlatCAMExcEditor.py:1701
#: flatcamEditors/FlatCAMExcEditor.py:1903
#: flatcamEditors/FlatCAMGrbEditor.py:2729 flatcamGUI/PreferencesUI.py:1548
#: flatcamGUI/PreferencesUI.py:2128 flatcamGUI/PreferencesUI.py:2415
#: flatcamGUI/PreferencesUI.py:2546 flatcamGUI/PreferencesUI.py:2871
msgid "CW"
msgstr "CW"

#: flatcamEditors/FlatCAMExcEditor.py:1702
#: flatcamEditors/FlatCAMExcEditor.py:1904
#: flatcamEditors/FlatCAMGrbEditor.py:2730 flatcamGUI/PreferencesUI.py:1549
#: flatcamGUI/PreferencesUI.py:2129 flatcamGUI/PreferencesUI.py:2416
#: flatcamGUI/PreferencesUI.py:2547 flatcamGUI/PreferencesUI.py:2872
msgid "CCW"
msgstr "CCW"

#: flatcamEditors/FlatCAMExcEditor.py:1706
#: flatcamEditors/FlatCAMExcEditor.py:1908
#: flatcamEditors/FlatCAMGrbEditor.py:2736 flatcamGUI/PreferencesUI.py:1531
#: flatcamGUI/PreferencesUI.py:1557 flatcamGUI/PreferencesUI.py:2398
#: flatcamGUI/PreferencesUI.py:2424 flatcamGUI/PreferencesUI.py:2529
#: flatcamGUI/PreferencesUI.py:2555
msgid "Angle at which each element in circular array is placed."
msgstr "Angle at which each element in circular array is placed."

#: flatcamEditors/FlatCAMExcEditor.py:1736
msgid "Slot Parameters"
msgstr "Slot Parameters"

#: flatcamEditors/FlatCAMExcEditor.py:1738
msgid ""
"Parameters for adding a slot (hole with oval shape)\n"
"either single or as an part of an array."
msgstr ""
"Parameters for adding a slot (hole with oval shape)\n"
"either single or as an part of an array."

#: flatcamEditors/FlatCAMExcEditor.py:1747 flatcamGUI/PreferencesUI.py:2437
#: flatcamTools/ToolProperties.py:350
msgid "Length"
msgstr "Length"

#: flatcamEditors/FlatCAMExcEditor.py:1749 flatcamGUI/PreferencesUI.py:2439
msgid "Length = The length of the slot."
msgstr "Length = The length of the slot."

#: flatcamEditors/FlatCAMExcEditor.py:1759 flatcamGUI/PreferencesUI.py:2450
msgid ""
"Direction on which the slot is oriented:\n"
"- 'X' - horizontal axis \n"
"- 'Y' - vertical axis or \n"
"- 'Angle' - a custom angle for the slot inclination"
msgstr ""
"Direction on which the slot is oriented:\n"
"- 'X' - horizontal axis \n"
"- 'Y' - vertical axis or \n"
"- 'Angle' - a custom angle for the slot inclination"

#: flatcamEditors/FlatCAMExcEditor.py:1774 flatcamGUI/PreferencesUI.py:2466
msgid ""
"Angle at which the slot is placed.\n"
"The precision is of max 2 decimals.\n"
"Min value is: -359.99 degrees.\n"
"Max value is:  360.00 degrees."
msgstr ""
"Angle at which the slot is placed.\n"
"The precision is of max 2 decimals.\n"
"Min value is: -359.99 degrees.\n"
"Max value is:  360.00 degrees."

#: flatcamEditors/FlatCAMExcEditor.py:1807
msgid "Slot Array Parameters"
msgstr "Slot Array Parameters"

#: flatcamEditors/FlatCAMExcEditor.py:1809
msgid "Parameters for the array of slots (linear or circular array)"
msgstr "Parameters for the array of slots (linear or circular array)"

#: flatcamEditors/FlatCAMExcEditor.py:1818
msgid ""
"Select the type of slot array to create.\n"
"It can be Linear X(Y) or Circular"
msgstr ""
"Select the type of slot array to create.\n"
"It can be Linear X(Y) or Circular"

#: flatcamEditors/FlatCAMExcEditor.py:1830 flatcamGUI/PreferencesUI.py:2488
msgid "Nr of slots"
msgstr "Nr of slots"

#: flatcamEditors/FlatCAMExcEditor.py:1831 flatcamGUI/PreferencesUI.py:2490
msgid "Specify how many slots to be in the array."
msgstr "Specify how many slots to be in the array."

#: flatcamEditors/FlatCAMExcEditor.py:2428
msgid ""
"Tool already in the original or actual tool list.\n"
"Save and reedit Excellon if you need to add this tool. "
msgstr ""
"Tool already in the original or actual tool list.\n"
"Save and reedit Excellon if you need to add this tool. "

#: flatcamEditors/FlatCAMExcEditor.py:2437 flatcamGUI/FlatCAMGUI.py:3276
msgid "Added new tool with dia"
msgstr "Added new tool with dia"

#: flatcamEditors/FlatCAMExcEditor.py:2469
msgid "Select a tool in Tool Table"
msgstr "Select a tool in Tool Table"

#: flatcamEditors/FlatCAMExcEditor.py:2502
msgid "Deleted tool with diameter"
msgstr "Deleted tool with diameter"

#: flatcamEditors/FlatCAMExcEditor.py:2652
msgid "Done. Tool edit completed."
msgstr "Done. Tool edit completed."

#: flatcamEditors/FlatCAMExcEditor.py:3186
msgid "There are no Tools definitions in the file. Aborting Excellon creation."
msgstr ""
"There are no Tools definitions in the file. Aborting Excellon creation."

#: flatcamEditors/FlatCAMExcEditor.py:3190
msgid "An internal error has ocurred. See Shell.\n"
msgstr "An internal error has ocurred. See Shell.\n"

#: flatcamEditors/FlatCAMExcEditor.py:3198
msgid "Creating Excellon."
msgstr "Creating Excellon."

#: flatcamEditors/FlatCAMExcEditor.py:3208
msgid "Excellon editing finished."
msgstr "Excellon editing finished."

#: flatcamEditors/FlatCAMExcEditor.py:3226
msgid "Cancelled. There is no Tool/Drill selected"
msgstr "Cancelled. There is no Tool/Drill selected"

#: flatcamEditors/FlatCAMExcEditor.py:3811
msgid "Done. Drill(s) deleted."
msgstr "Done. Drill(s) deleted."

#: flatcamEditors/FlatCAMExcEditor.py:3883
#: flatcamEditors/FlatCAMExcEditor.py:3893
#: flatcamEditors/FlatCAMGrbEditor.py:4612
msgid "Click on the circular array Center position"
msgstr "Click on the circular array Center position"

#: flatcamEditors/FlatCAMGeoEditor.py:82
msgid "Buffer distance:"
msgstr "Buffer distance:"

#: flatcamEditors/FlatCAMGeoEditor.py:83
msgid "Buffer corner:"
msgstr "Buffer corner:"

#: flatcamEditors/FlatCAMGeoEditor.py:85
msgid ""
"There are 3 types of corners:\n"
" - 'Round': the corner is rounded for exterior buffer.\n"
" - 'Square:' the corner is met in a sharp angle for exterior buffer.\n"
" - 'Beveled:' the corner is a line that directly connects the features "
"meeting in the corner"
msgstr ""
"There are 3 types of corners:\n"
" - 'Round': the corner is rounded for exterior buffer.\n"
" - 'Square:' the corner is met in a sharp angle for exterior buffer.\n"
" - 'Beveled:' the corner is a line that directly connects the features "
"meeting in the corner"

#: flatcamEditors/FlatCAMGeoEditor.py:91
#: flatcamEditors/FlatCAMGrbEditor.py:2522
msgid "Round"
msgstr "Round"

#: flatcamEditors/FlatCAMGeoEditor.py:92
#: flatcamEditors/FlatCAMGrbEditor.py:2523
msgid "Square"
msgstr "Square"

#: flatcamEditors/FlatCAMGeoEditor.py:93
#: flatcamEditors/FlatCAMGrbEditor.py:2524
msgid "Beveled"
msgstr "Beveled"

#: flatcamEditors/FlatCAMGeoEditor.py:100
msgid "Buffer Interior"
msgstr "Buffer Interior"

#: flatcamEditors/FlatCAMGeoEditor.py:102
msgid "Buffer Exterior"
msgstr "Buffer Exterior"

#: flatcamEditors/FlatCAMGeoEditor.py:108
msgid "Full Buffer"
msgstr "Full Buffer"

#: flatcamEditors/FlatCAMGeoEditor.py:129
#: flatcamEditors/FlatCAMGeoEditor.py:2721 flatcamGUI/FlatCAMGUI.py:1499
#: flatcamGUI/PreferencesUI.py:1564
msgid "Buffer Tool"
msgstr "Buffer Tool"

#: flatcamEditors/FlatCAMGeoEditor.py:141
#: flatcamEditors/FlatCAMGeoEditor.py:158
#: flatcamEditors/FlatCAMGeoEditor.py:175
#: flatcamEditors/FlatCAMGeoEditor.py:2741
#: flatcamEditors/FlatCAMGeoEditor.py:2771
#: flatcamEditors/FlatCAMGeoEditor.py:2801
#: flatcamEditors/FlatCAMGrbEditor.py:4665
msgid "Buffer distance value is missing or wrong format. Add it and retry."
msgstr "Buffer distance value is missing or wrong format. Add it and retry."

#: flatcamEditors/FlatCAMGeoEditor.py:345
msgid "Text Tool"
msgstr "Text Tool"

#: flatcamEditors/FlatCAMGeoEditor.py:403 flatcamGUI/FlatCAMGUI.py:838
msgid "Tool"
msgstr "Tool"

#: flatcamEditors/FlatCAMGeoEditor.py:434 flatcamGUI/ObjectUI.py:264
#: flatcamGUI/PreferencesUI.py:1104 flatcamGUI/PreferencesUI.py:2601
#: flatcamGUI/PreferencesUI.py:3533 flatcamGUI/PreferencesUI.py:3693
#: flatcamTools/ToolCutOut.py:91
msgid "Tool dia"
msgstr "Tool dia"

#: flatcamEditors/FlatCAMGeoEditor.py:436 flatcamGUI/PreferencesUI.py:3695
msgid ""
"Diameter of the tool to\n"
"be used in the operation."
msgstr ""
"Diameter of the tool to\n"
"be used in the operation."

#: flatcamEditors/FlatCAMGeoEditor.py:445 flatcamGUI/PreferencesUI.py:3375
#: flatcamGUI/PreferencesUI.py:3724 flatcamTools/ToolNonCopperClear.py:283
#: flatcamTools/ToolPaint.py:205
msgid "Overlap Rate"
msgstr "Overlap Rate"

#: flatcamEditors/FlatCAMGeoEditor.py:447 flatcamGUI/PreferencesUI.py:3726
#: flatcamTools/ToolPaint.py:207
#, python-format
msgid ""
"How much (fraction) of the tool width to overlap each tool pass.\n"
"Example:\n"
"A value here of 0.25 means 25%% from the tool diameter found above.\n"
"\n"
"Adjust the value starting with lower values\n"
"and increasing it if areas that should be painted are still \n"
"not painted.\n"
"Lower values = faster processing, faster execution on PCB.\n"
"Higher values = slow processing and slow execution on CNC\n"
"due of too many paths."
msgstr ""
"How much (fraction) of the tool width to overlap each tool pass.\n"
"Example:\n"
"A value here of 0.25 means 25%% from the tool diameter found above.\n"
"\n"
"Adjust the value starting with lower values\n"
"and increasing it if areas that should be painted are still \n"
"not painted.\n"
"Lower values = faster processing, faster execution on PCB.\n"
"Higher values = slow processing and slow execution on CNC\n"
"due of too many paths."

#: flatcamEditors/FlatCAMGeoEditor.py:463 flatcamGUI/PreferencesUI.py:3396
#: flatcamGUI/PreferencesUI.py:3557 flatcamGUI/PreferencesUI.py:3745
#: flatcamTools/ToolNonCopperClear.py:303 flatcamTools/ToolPaint.py:226
msgid "Margin"
msgstr "Margin"

#: flatcamEditors/FlatCAMGeoEditor.py:465 flatcamGUI/PreferencesUI.py:3747
#: flatcamTools/ToolPaint.py:228
msgid ""
"Distance by which to avoid\n"
"the edges of the polygon to\n"
"be painted."
msgstr ""
"Distance by which to avoid\n"
"the edges of the polygon to\n"
"be painted."

#: flatcamEditors/FlatCAMGeoEditor.py:474 flatcamGUI/PreferencesUI.py:3405
#: flatcamGUI/PreferencesUI.py:3756 flatcamTools/ToolNonCopperClear.py:312
#: flatcamTools/ToolPaint.py:237
msgid "Method"
msgstr "Method"

#: flatcamEditors/FlatCAMGeoEditor.py:476
msgid ""
"Algorithm to paint the polygon:<BR><B>Standard</B>: Fixed step inwards."
"<BR><B>Seed-based</B>: Outwards from seed."
msgstr ""
"Algorithm to paint the polygon:<BR><B>Standard</B>: Fixed step inwards."
"<BR><B>Seed-based</B>: Outwards from seed."

#: flatcamEditors/FlatCAMGeoEditor.py:482 flatcamGUI/PreferencesUI.py:3414
#: flatcamGUI/PreferencesUI.py:3765 flatcamTools/ToolNonCopperClear.py:321
#: flatcamTools/ToolPaint.py:246
msgid "Standard"
msgstr "Standard"

#: flatcamEditors/FlatCAMGeoEditor.py:483 flatcamGUI/PreferencesUI.py:3415
#: flatcamGUI/PreferencesUI.py:3766 flatcamTools/ToolNonCopperClear.py:322
#: flatcamTools/ToolPaint.py:247
msgid "Seed-based"
msgstr "Seed-based"

#: flatcamEditors/FlatCAMGeoEditor.py:484 flatcamGUI/PreferencesUI.py:3416
#: flatcamGUI/PreferencesUI.py:3767 flatcamTools/ToolNonCopperClear.py:323
#: flatcamTools/ToolPaint.py:248
msgid "Straight lines"
msgstr "Straight lines"

#: flatcamEditors/FlatCAMGeoEditor.py:489
msgid "Connect:"
msgstr "Connect:"

#: flatcamEditors/FlatCAMGeoEditor.py:491 flatcamGUI/PreferencesUI.py:3423
#: flatcamGUI/PreferencesUI.py:3774 flatcamTools/ToolNonCopperClear.py:330
#: flatcamTools/ToolPaint.py:255
msgid ""
"Draw lines between resulting\n"
"segments to minimize tool lifts."
msgstr ""
"Draw lines between resulting\n"
"segments to minimize tool lifts."

#: flatcamEditors/FlatCAMGeoEditor.py:498
msgid "Contour:"
msgstr "Contour:"

#: flatcamEditors/FlatCAMGeoEditor.py:500 flatcamGUI/PreferencesUI.py:3433
#: flatcamGUI/PreferencesUI.py:3784 flatcamTools/ToolNonCopperClear.py:339
#: flatcamTools/ToolPaint.py:264
msgid ""
"Cut around the perimeter of the polygon\n"
"to trim rough edges."
msgstr ""
"Cut around the perimeter of the polygon\n"
"to trim rough edges."

#: flatcamEditors/FlatCAMGeoEditor.py:511 flatcamGUI/FlatCAMGUI.py:1743
msgid "Paint"
msgstr "Paint"

#: flatcamEditors/FlatCAMGeoEditor.py:529 flatcamGUI/FlatCAMGUI.py:673
#: flatcamGUI/FlatCAMGUI.py:2104 flatcamGUI/ObjectUI.py:1365
#: flatcamTools/ToolPaint.py:25 flatcamTools/ToolPaint.py:452
msgid "Paint Tool"
msgstr "Paint Tool"

#: flatcamEditors/FlatCAMGeoEditor.py:566
msgid "Paint cancelled. No shape selected."
msgstr "Paint cancelled. No shape selected."

#: flatcamEditors/FlatCAMGeoEditor.py:578 flatcamTools/ToolCutOut.py:387
#: flatcamTools/ToolCutOut.py:585 flatcamTools/ToolCutOut.py:755
#: flatcamTools/ToolCutOut.py:849 flatcamTools/ToolDblSided.py:367
msgid "Tool diameter value is missing or wrong format. Add it and retry."
msgstr "Tool diameter value is missing or wrong format. Add it and retry."

#: flatcamEditors/FlatCAMGeoEditor.py:589
msgid "Overlap value is missing or wrong format. Add it and retry."
msgstr "Overlap value is missing or wrong format. Add it and retry."

#: flatcamEditors/FlatCAMGeoEditor.py:601
msgid "Margin distance value is missing or wrong format. Add it and retry."
msgstr "Margin distance value is missing or wrong format. Add it and retry."

#: flatcamEditors/FlatCAMGeoEditor.py:609
#: flatcamEditors/FlatCAMGeoEditor.py:2747
#: flatcamEditors/FlatCAMGeoEditor.py:2777
#: flatcamEditors/FlatCAMGeoEditor.py:2807 flatcamGUI/PreferencesUI.py:2597
#: flatcamTools/ToolProperties.py:113 flatcamTools/ToolProperties.py:139
msgid "Tools"
msgstr "Tools"

#: flatcamEditors/FlatCAMGeoEditor.py:620
#: flatcamEditors/FlatCAMGeoEditor.py:994
#: flatcamEditors/FlatCAMGrbEditor.py:4848
#: flatcamEditors/FlatCAMGrbEditor.py:5233 flatcamGUI/FlatCAMGUI.py:684
#: flatcamGUI/FlatCAMGUI.py:2117 flatcamTools/ToolTransform.py:403
msgid "Transform Tool"
msgstr "Transform Tool"

#: flatcamEditors/FlatCAMGeoEditor.py:621
#: flatcamEditors/FlatCAMGeoEditor.py:683
#: flatcamEditors/FlatCAMGrbEditor.py:4849
#: flatcamEditors/FlatCAMGrbEditor.py:4911 flatcamTools/ToolTransform.py:24
#: flatcamTools/ToolTransform.py:82
msgid "Rotate"
msgstr "Rotate"

#: flatcamEditors/FlatCAMGeoEditor.py:622
#: flatcamEditors/FlatCAMGrbEditor.py:4850 flatcamTools/ToolTransform.py:25
msgid "Skew/Shear"
msgstr "Skew/Shear"

#: flatcamEditors/FlatCAMGeoEditor.py:623
#: flatcamEditors/FlatCAMGrbEditor.py:2569
#: flatcamEditors/FlatCAMGrbEditor.py:4851 flatcamGUI/FlatCAMGUI.py:751
#: flatcamGUI/FlatCAMGUI.py:1693 flatcamGUI/FlatCAMGUI.py:1770
#: flatcamGUI/FlatCAMGUI.py:2186 flatcamGUI/ObjectUI.py:79
#: flatcamGUI/ObjectUI.py:100 flatcamTools/ToolTransform.py:26
msgid "Scale"
msgstr "Scale"

#: flatcamEditors/FlatCAMGeoEditor.py:624
#: flatcamEditors/FlatCAMGrbEditor.py:4852 flatcamTools/ToolTransform.py:27
msgid "Mirror (Flip)"
msgstr "Mirror (Flip)"

#: flatcamEditors/FlatCAMGeoEditor.py:625
#: flatcamEditors/FlatCAMGrbEditor.py:4853 flatcamGUI/ObjectUI.py:108
#: flatcamGUI/ObjectUI.py:127 flatcamGUI/ObjectUI.py:957
#: flatcamGUI/ObjectUI.py:1522 flatcamGUI/PreferencesUI.py:3456
#: flatcamTools/ToolNonCopperClear.py:361 flatcamTools/ToolTransform.py:28
msgid "Offset"
msgstr "Offset"

#: flatcamEditors/FlatCAMGeoEditor.py:637
#: flatcamEditors/FlatCAMGrbEditor.py:4865 flatcamGUI/FlatCAMGUI.py:646
#: flatcamGUI/FlatCAMGUI.py:2077
msgid "Editor"
msgstr "Editor"

#: flatcamEditors/FlatCAMGeoEditor.py:669
#: flatcamEditors/FlatCAMGrbEditor.py:4897
msgid "Angle:"
msgstr "Angle:"

#: flatcamEditors/FlatCAMGeoEditor.py:671
#: flatcamEditors/FlatCAMGrbEditor.py:4899 flatcamGUI/PreferencesUI.py:4126
#: flatcamTools/ToolTransform.py:70
msgid ""
"Angle for Rotation action, in degrees.\n"
"Float number between -360 and 359.\n"
"Positive numbers for CW motion.\n"
"Negative numbers for CCW motion."
msgstr ""
"Angle for Rotation action, in degrees.\n"
"Float number between -360 and 359.\n"
"Positive numbers for CW motion.\n"
"Negative numbers for CCW motion."

#: flatcamEditors/FlatCAMGeoEditor.py:685
#: flatcamEditors/FlatCAMGrbEditor.py:4913
msgid ""
"Rotate the selected shape(s).\n"
"The point of reference is the middle of\n"
"the bounding box for all selected shapes."
msgstr ""
"Rotate the selected shape(s).\n"
"The point of reference is the middle of\n"
"the bounding box for all selected shapes."

#: flatcamEditors/FlatCAMGeoEditor.py:708
#: flatcamEditors/FlatCAMGrbEditor.py:4936
msgid "Angle X:"
msgstr "Angle X:"

#: flatcamEditors/FlatCAMGeoEditor.py:710
#: flatcamEditors/FlatCAMGeoEditor.py:728
#: flatcamEditors/FlatCAMGrbEditor.py:4938
#: flatcamEditors/FlatCAMGrbEditor.py:4956 flatcamGUI/PreferencesUI.py:4138
#: flatcamGUI/PreferencesUI.py:4148 flatcamTools/ToolTransform.py:109
#: flatcamTools/ToolTransform.py:127
msgid ""
"Angle for Skew action, in degrees.\n"
"Float number between -360 and 359."
msgstr ""
"Angle for Skew action, in degrees.\n"
"Float number between -360 and 359."

#: flatcamEditors/FlatCAMGeoEditor.py:719
#: flatcamEditors/FlatCAMGrbEditor.py:4947 flatcamTools/ToolTransform.py:118
msgid "Skew X"
msgstr "Skew X"

#: flatcamEditors/FlatCAMGeoEditor.py:721
#: flatcamEditors/FlatCAMGeoEditor.py:739
#: flatcamEditors/FlatCAMGrbEditor.py:4949
#: flatcamEditors/FlatCAMGrbEditor.py:4967
msgid ""
"Skew/shear the selected shape(s).\n"
"The point of reference is the middle of\n"
"the bounding box for all selected shapes."
msgstr ""
"Skew/shear the selected shape(s).\n"
"The point of reference is the middle of\n"
"the bounding box for all selected shapes."

#: flatcamEditors/FlatCAMGeoEditor.py:726
#: flatcamEditors/FlatCAMGrbEditor.py:4954
msgid "Angle Y:"
msgstr "Angle Y:"

#: flatcamEditors/FlatCAMGeoEditor.py:737
#: flatcamEditors/FlatCAMGrbEditor.py:4965 flatcamTools/ToolTransform.py:136
msgid "Skew Y"
msgstr "Skew Y"

#: flatcamEditors/FlatCAMGeoEditor.py:765
#: flatcamEditors/FlatCAMGrbEditor.py:4993
msgid "Factor X:"
msgstr "Factor X:"

#: flatcamEditors/FlatCAMGeoEditor.py:767
#: flatcamEditors/FlatCAMGrbEditor.py:4995
msgid "Factor for Scale action over X axis."
msgstr "Factor for Scale action over X axis."

#: flatcamEditors/FlatCAMGeoEditor.py:775
#: flatcamEditors/FlatCAMGrbEditor.py:5003 flatcamTools/ToolTransform.py:174
msgid "Scale X"
msgstr "Scale X"

#: flatcamEditors/FlatCAMGeoEditor.py:777
#: flatcamEditors/FlatCAMGeoEditor.py:794
#: flatcamEditors/FlatCAMGrbEditor.py:5005
#: flatcamEditors/FlatCAMGrbEditor.py:5022
msgid ""
"Scale the selected shape(s).\n"
"The point of reference depends on \n"
"the Scale reference checkbox state."
msgstr ""
"Scale the selected shape(s).\n"
"The point of reference depends on \n"
"the Scale reference checkbox state."

#: flatcamEditors/FlatCAMGeoEditor.py:782
#: flatcamEditors/FlatCAMGrbEditor.py:5010
msgid "Factor Y:"
msgstr "Factor Y:"

#: flatcamEditors/FlatCAMGeoEditor.py:784
#: flatcamEditors/FlatCAMGrbEditor.py:5012
msgid "Factor for Scale action over Y axis."
msgstr "Factor for Scale action over Y axis."

#: flatcamEditors/FlatCAMGeoEditor.py:792
#: flatcamEditors/FlatCAMGrbEditor.py:5020 flatcamTools/ToolTransform.py:191
msgid "Scale Y"
msgstr "Scale Y"

#: flatcamEditors/FlatCAMGeoEditor.py:801
#: flatcamEditors/FlatCAMGrbEditor.py:5029 flatcamGUI/PreferencesUI.py:4173
#: flatcamTools/ToolTransform.py:200
msgid "Link"
msgstr "Link"

#: flatcamEditors/FlatCAMGeoEditor.py:803
#: flatcamEditors/FlatCAMGrbEditor.py:5031
msgid ""
"Scale the selected shape(s)\n"
"using the Scale Factor X for both axis."
msgstr ""
"Scale the selected shape(s)\n"
"using the Scale Factor X for both axis."

#: flatcamEditors/FlatCAMGeoEditor.py:809
#: flatcamEditors/FlatCAMGrbEditor.py:5037 flatcamGUI/PreferencesUI.py:4181
#: flatcamTools/ToolTransform.py:209
msgid "Scale Reference"
msgstr "Scale Reference"

#: flatcamEditors/FlatCAMGeoEditor.py:811
#: flatcamEditors/FlatCAMGrbEditor.py:5039
msgid ""
"Scale the selected shape(s)\n"
"using the origin reference when checked,\n"
"and the center of the biggest bounding box\n"
"of the selected shapes when unchecked."
msgstr ""
"Scale the selected shape(s)\n"
"using the origin reference when checked,\n"
"and the center of the biggest bounding box\n"
"of the selected shapes when unchecked."

#: flatcamEditors/FlatCAMGeoEditor.py:839
#: flatcamEditors/FlatCAMGrbEditor.py:5068
msgid "Value X:"
msgstr "Value X:"

#: flatcamEditors/FlatCAMGeoEditor.py:841
#: flatcamEditors/FlatCAMGrbEditor.py:5070
msgid "Value for Offset action on X axis."
msgstr "Value for Offset action on X axis."

#: flatcamEditors/FlatCAMGeoEditor.py:849
#: flatcamEditors/FlatCAMGrbEditor.py:5078 flatcamTools/ToolTransform.py:249
msgid "Offset X"
msgstr "Offset X"

#: flatcamEditors/FlatCAMGeoEditor.py:851
#: flatcamEditors/FlatCAMGeoEditor.py:869
#: flatcamEditors/FlatCAMGrbEditor.py:5080
#: flatcamEditors/FlatCAMGrbEditor.py:5098
msgid ""
"Offset the selected shape(s).\n"
"The point of reference is the middle of\n"
"the bounding box for all selected shapes.\n"
msgstr ""
"Offset the selected shape(s).\n"
"The point of reference is the middle of\n"
"the bounding box for all selected shapes.\n"

#: flatcamEditors/FlatCAMGeoEditor.py:857
#: flatcamEditors/FlatCAMGrbEditor.py:5086
msgid "Value Y:"
msgstr "Value Y:"

#: flatcamEditors/FlatCAMGeoEditor.py:859
#: flatcamEditors/FlatCAMGrbEditor.py:5088
msgid "Value for Offset action on Y axis."
msgstr "Value for Offset action on Y axis."

#: flatcamEditors/FlatCAMGeoEditor.py:867
#: flatcamEditors/FlatCAMGrbEditor.py:5096 flatcamTools/ToolTransform.py:266
msgid "Offset Y"
msgstr "Offset Y"

#: flatcamEditors/FlatCAMGeoEditor.py:898
#: flatcamEditors/FlatCAMGrbEditor.py:5127 flatcamTools/ToolTransform.py:296
msgid "Flip on X"
msgstr "Flip on X"

#: flatcamEditors/FlatCAMGeoEditor.py:900
#: flatcamEditors/FlatCAMGeoEditor.py:908
#: flatcamEditors/FlatCAMGrbEditor.py:5129
#: flatcamEditors/FlatCAMGrbEditor.py:5137
msgid ""
"Flip the selected shape(s) over the X axis.\n"
"Does not create a new shape."
msgstr ""
"Flip the selected shape(s) over the X axis.\n"
"Does not create a new shape."

#: flatcamEditors/FlatCAMGeoEditor.py:906
#: flatcamEditors/FlatCAMGrbEditor.py:5135 flatcamTools/ToolTransform.py:304
msgid "Flip on Y"
msgstr "Flip on Y"

#: flatcamEditors/FlatCAMGeoEditor.py:915
#: flatcamEditors/FlatCAMGrbEditor.py:5144
msgid "Ref Pt"
msgstr "Ref Pt"

#: flatcamEditors/FlatCAMGeoEditor.py:917
#: flatcamEditors/FlatCAMGrbEditor.py:5146
msgid ""
"Flip the selected shape(s)\n"
"around the point in Point Entry Field.\n"
"\n"
"The point coordinates can be captured by\n"
"left click on canvas together with pressing\n"
"SHIFT key. \n"
"Then click Add button to insert coordinates.\n"
"Or enter the coords in format (x, y) in the\n"
"Point Entry field and click Flip on X(Y)"
msgstr ""
"Flip the selected shape(s)\n"
"around the point in Point Entry Field.\n"
"\n"
"The point coordinates can be captured by\n"
"left click on canvas together with pressing\n"
"SHIFT key. \n"
"Then click Add button to insert coordinates.\n"
"Or enter the coords in format (x, y) in the\n"
"Point Entry field and click Flip on X(Y)"

#: flatcamEditors/FlatCAMGeoEditor.py:929
#: flatcamEditors/FlatCAMGrbEditor.py:5158
msgid "Point:"
msgstr "Point:"

#: flatcamEditors/FlatCAMGeoEditor.py:931
#: flatcamEditors/FlatCAMGrbEditor.py:5160
msgid ""
"Coordinates in format (x, y) used as reference for mirroring.\n"
"The 'x' in (x, y) will be used when using Flip on X and\n"
"the 'y' in (x, y) will be used when using Flip on Y."
msgstr ""
"Coordinates in format (x, y) used as reference for mirroring.\n"
"The 'x' in (x, y) will be used when using Flip on X and\n"
"the 'y' in (x, y) will be used when using Flip on Y."

#: flatcamEditors/FlatCAMGeoEditor.py:943
#: flatcamEditors/FlatCAMGrbEditor.py:5172 flatcamTools/ToolTransform.py:340
msgid ""
"The point coordinates can be captured by\n"
"left click on canvas together with pressing\n"
"SHIFT key. Then click Add button to insert."
msgstr ""
"The point coordinates can be captured by\n"
"left click on canvas together with pressing\n"
"SHIFT key. Then click Add button to insert."

#: flatcamEditors/FlatCAMGeoEditor.py:1059
#: flatcamEditors/FlatCAMGrbEditor.py:5298
msgid "Transformation cancelled. No shape selected."
msgstr "Transformation cancelled. No shape selected."

#: flatcamEditors/FlatCAMGeoEditor.py:1268
#: flatcamEditors/FlatCAMGrbEditor.py:5544
msgid "No shape selected. Please Select a shape to rotate!"
msgstr "No shape selected. Please Select a shape to rotate!"

#: flatcamEditors/FlatCAMGeoEditor.py:1271
#: flatcamEditors/FlatCAMGrbEditor.py:5547 flatcamTools/ToolTransform.py:646
msgid "Appying Rotate"
msgstr "Appying Rotate"

#: flatcamEditors/FlatCAMGeoEditor.py:1300
#: flatcamEditors/FlatCAMGrbEditor.py:5581
msgid "Done. Rotate completed."
msgstr "Done. Rotate completed."

#: flatcamEditors/FlatCAMGeoEditor.py:1306
msgid "Rotation action was not executed"
msgstr "Rotation action was not executed"

#: flatcamEditors/FlatCAMGeoEditor.py:1318
#: flatcamEditors/FlatCAMGrbEditor.py:5602
msgid "No shape selected. Please Select a shape to flip!"
msgstr "No shape selected. Please Select a shape to flip!"

#: flatcamEditors/FlatCAMGeoEditor.py:1321
#: flatcamEditors/FlatCAMGrbEditor.py:5605 flatcamTools/ToolTransform.py:699
msgid "Applying Flip"
msgstr "Applying Flip"

#: flatcamEditors/FlatCAMGeoEditor.py:1352
#: flatcamEditors/FlatCAMGrbEditor.py:5645 flatcamTools/ToolTransform.py:742
msgid "Flip on the Y axis done"
msgstr "Flip on the Y axis done"

#: flatcamEditors/FlatCAMGeoEditor.py:1356
#: flatcamEditors/FlatCAMGrbEditor.py:5654 flatcamTools/ToolTransform.py:752
msgid "Flip on the X axis done"
msgstr "Flip on the X axis done"

#: flatcamEditors/FlatCAMGeoEditor.py:1367
msgid "Flip action was not executed"
msgstr "Flip action was not executed"

#: flatcamEditors/FlatCAMGeoEditor.py:1377
#: flatcamEditors/FlatCAMGrbEditor.py:5676
msgid "No shape selected. Please Select a shape to shear/skew!"
msgstr "No shape selected. Please Select a shape to shear/skew!"

#: flatcamEditors/FlatCAMGeoEditor.py:1380
#: flatcamEditors/FlatCAMGrbEditor.py:5679 flatcamTools/ToolTransform.py:772
msgid "Applying Skew"
msgstr "Applying Skew"

#: flatcamEditors/FlatCAMGeoEditor.py:1406
#: flatcamEditors/FlatCAMGrbEditor.py:5716
msgid "Skew on the X axis done"
msgstr "Skew on the X axis done"

#: flatcamEditors/FlatCAMGeoEditor.py:1409
#: flatcamEditors/FlatCAMGrbEditor.py:5719
msgid "Skew on the Y axis done"
msgstr "Skew on the Y axis done"

#: flatcamEditors/FlatCAMGeoEditor.py:1414
msgid "Skew action was not executed"
msgstr "Skew action was not executed"

#: flatcamEditors/FlatCAMGeoEditor.py:1426
#: flatcamEditors/FlatCAMGrbEditor.py:5744
msgid "No shape selected. Please Select a shape to scale!"
msgstr "No shape selected. Please Select a shape to scale!"

#: flatcamEditors/FlatCAMGeoEditor.py:1429
#: flatcamEditors/FlatCAMGrbEditor.py:5747 flatcamTools/ToolTransform.py:824
msgid "Applying Scale"
msgstr "Applying Scale"

#: flatcamEditors/FlatCAMGeoEditor.py:1464
#: flatcamEditors/FlatCAMGrbEditor.py:5787
msgid "Scale on the X axis done"
msgstr "Scale on the X axis done"

#: flatcamEditors/FlatCAMGeoEditor.py:1467
#: flatcamEditors/FlatCAMGrbEditor.py:5790
msgid "Scale on the Y axis done"
msgstr "Scale on the Y axis done"

#: flatcamEditors/FlatCAMGeoEditor.py:1471
msgid "Scale action was not executed"
msgstr "Scale action was not executed"

#: flatcamEditors/FlatCAMGeoEditor.py:1481
#: flatcamEditors/FlatCAMGrbEditor.py:5808
msgid "No shape selected. Please Select a shape to offset!"
msgstr "No shape selected. Please Select a shape to offset!"

#: flatcamEditors/FlatCAMGeoEditor.py:1484
#: flatcamEditors/FlatCAMGrbEditor.py:5811 flatcamTools/ToolTransform.py:879
msgid "Applying Offset"
msgstr "Applying Offset"

#: flatcamEditors/FlatCAMGeoEditor.py:1497
#: flatcamEditors/FlatCAMGrbEditor.py:5835
msgid "Offset on the X axis done"
msgstr "Offset on the X axis done"

#: flatcamEditors/FlatCAMGeoEditor.py:1500
#: flatcamEditors/FlatCAMGrbEditor.py:5838
msgid "Offset on the Y axis done"
msgstr "Offset on the Y axis done"

#: flatcamEditors/FlatCAMGeoEditor.py:1505
msgid "Offset action was not executed"
msgstr "Offset action was not executed"

#: flatcamEditors/FlatCAMGeoEditor.py:1509
#: flatcamEditors/FlatCAMGrbEditor.py:5847
msgid "Rotate ..."
msgstr "Rotate ..."

#: flatcamEditors/FlatCAMGeoEditor.py:1510
#: flatcamEditors/FlatCAMGeoEditor.py:1565
#: flatcamEditors/FlatCAMGeoEditor.py:1582
#: flatcamEditors/FlatCAMGrbEditor.py:5848
#: flatcamEditors/FlatCAMGrbEditor.py:5903
#: flatcamEditors/FlatCAMGrbEditor.py:5920
msgid "Enter an Angle Value (degrees)"
msgstr "Enter an Angle Value (degrees)"

#: flatcamEditors/FlatCAMGeoEditor.py:1519
#: flatcamEditors/FlatCAMGrbEditor.py:5857
msgid "Geometry shape rotate done"
msgstr "Geometry shape rotate done"

#: flatcamEditors/FlatCAMGeoEditor.py:1523
#: flatcamEditors/FlatCAMGrbEditor.py:5861
msgid "Geometry shape rotate cancelled"
msgstr "Geometry shape rotate cancelled"

#: flatcamEditors/FlatCAMGeoEditor.py:1528
#: flatcamEditors/FlatCAMGrbEditor.py:5866
msgid "Offset on X axis ..."
msgstr "Offset on X axis ..."

#: flatcamEditors/FlatCAMGeoEditor.py:1529
#: flatcamEditors/FlatCAMGeoEditor.py:1548
#: flatcamEditors/FlatCAMGrbEditor.py:5867
#: flatcamEditors/FlatCAMGrbEditor.py:5886
msgid "Enter a distance Value"
msgstr "Enter a distance Value"

#: flatcamEditors/FlatCAMGeoEditor.py:1538
#: flatcamEditors/FlatCAMGrbEditor.py:5876
msgid "Geometry shape offset on X axis done"
msgstr "Geometry shape offset on X axis done"

#: flatcamEditors/FlatCAMGeoEditor.py:1542
#: flatcamEditors/FlatCAMGrbEditor.py:5880
msgid "Geometry shape offset X cancelled"
msgstr "Geometry shape offset X cancelled"

#: flatcamEditors/FlatCAMGeoEditor.py:1547
#: flatcamEditors/FlatCAMGrbEditor.py:5885
msgid "Offset on Y axis ..."
msgstr "Offset on Y axis ..."

#: flatcamEditors/FlatCAMGeoEditor.py:1557
#: flatcamEditors/FlatCAMGrbEditor.py:5895
msgid "Geometry shape offset on Y axis done"
msgstr "Geometry shape offset on Y axis done"

#: flatcamEditors/FlatCAMGeoEditor.py:1561
msgid "Geometry shape offset on Y axis canceled"
msgstr "Geometry shape offset on Y axis canceled"

#: flatcamEditors/FlatCAMGeoEditor.py:1564
#: flatcamEditors/FlatCAMGrbEditor.py:5902
msgid "Skew on X axis ..."
msgstr "Skew on X axis ..."

#: flatcamEditors/FlatCAMGeoEditor.py:1574
#: flatcamEditors/FlatCAMGrbEditor.py:5912
msgid "Geometry shape skew on X axis done"
msgstr "Geometry shape skew on X axis done"

#: flatcamEditors/FlatCAMGeoEditor.py:1578
msgid "Geometry shape skew on X axis canceled"
msgstr "Geometry shape skew on X axis canceled"

#: flatcamEditors/FlatCAMGeoEditor.py:1581
#: flatcamEditors/FlatCAMGrbEditor.py:5919
msgid "Skew on Y axis ..."
msgstr "Skew on Y axis ..."

#: flatcamEditors/FlatCAMGeoEditor.py:1591
#: flatcamEditors/FlatCAMGrbEditor.py:5929
msgid "Geometry shape skew on Y axis done"
msgstr "Geometry shape skew on Y axis done"

#: flatcamEditors/FlatCAMGeoEditor.py:1595
msgid "Geometry shape skew on Y axis canceled"
msgstr "Geometry shape skew on Y axis canceled"

#: flatcamEditors/FlatCAMGeoEditor.py:1959
#: flatcamEditors/FlatCAMGeoEditor.py:2011
#: flatcamEditors/FlatCAMGrbEditor.py:1396
#: flatcamEditors/FlatCAMGrbEditor.py:1466
msgid "Click on Center point ..."
msgstr "Click on Center point ..."

#: flatcamEditors/FlatCAMGeoEditor.py:1966
#: flatcamEditors/FlatCAMGrbEditor.py:1404
msgid "Click on Perimeter point to complete ..."
msgstr "Click on Perimeter point to complete ..."

#: flatcamEditors/FlatCAMGeoEditor.py:1996
msgid "Done. Adding Circle completed."
msgstr "Done. Adding Circle completed."

#: flatcamEditors/FlatCAMGeoEditor.py:2031
#: flatcamEditors/FlatCAMGrbEditor.py:1498
msgid "Click on Start point ..."
msgstr "Click on Start point ..."

#: flatcamEditors/FlatCAMGeoEditor.py:2033
#: flatcamEditors/FlatCAMGrbEditor.py:1500
msgid "Click on Point3 ..."
msgstr "Click on Point3 ..."

#: flatcamEditors/FlatCAMGeoEditor.py:2035
#: flatcamEditors/FlatCAMGrbEditor.py:1502
msgid "Click on Stop point ..."
msgstr "Click on Stop point ..."

#: flatcamEditors/FlatCAMGeoEditor.py:2040
#: flatcamEditors/FlatCAMGrbEditor.py:1507
msgid "Click on Stop point to complete ..."
msgstr "Click on Stop point to complete ..."

#: flatcamEditors/FlatCAMGeoEditor.py:2042
#: flatcamEditors/FlatCAMGrbEditor.py:1509
msgid "Click on Point2 to complete ..."
msgstr "Click on Point2 to complete ..."

#: flatcamEditors/FlatCAMGeoEditor.py:2044
#: flatcamEditors/FlatCAMGrbEditor.py:1511
msgid "Click on Center point to complete ..."
msgstr "Click on Center point to complete ..."

#: flatcamEditors/FlatCAMGeoEditor.py:2056
#, python-format
msgid "Direction: %s"
msgstr "Direction: %s"

#: flatcamEditors/FlatCAMGeoEditor.py:2066
#: flatcamEditors/FlatCAMGrbEditor.py:1533
msgid "Mode: Start -> Stop -> Center. Click on Start point ..."
msgstr "Mode: Start -> Stop -> Center. Click on Start point ..."

#: flatcamEditors/FlatCAMGeoEditor.py:2069
#: flatcamEditors/FlatCAMGrbEditor.py:1536
msgid "Mode: Point1 -> Point3 -> Point2. Click on Point1 ..."
msgstr "Mode: Point1 -> Point3 -> Point2. Click on Point1 ..."

#: flatcamEditors/FlatCAMGeoEditor.py:2072
#: flatcamEditors/FlatCAMGrbEditor.py:1539
msgid "Mode: Center -> Start -> Stop. Click on Center point ..."
msgstr "Mode: Center -> Start -> Stop. Click on Center point ..."

#: flatcamEditors/FlatCAMGeoEditor.py:2211
msgid "Done. Arc completed."
msgstr "Done. Arc completed."

#: flatcamEditors/FlatCAMGeoEditor.py:2230
#: flatcamEditors/FlatCAMGeoEditor.py:2284
#: flatcamEditors/FlatCAMGeoEditor.py:2657
msgid "Click on 1st corner ..."
msgstr "Click on 1st corner ..."

#: flatcamEditors/FlatCAMGeoEditor.py:2236
msgid "Click on opposite corner to complete ..."
msgstr "Click on opposite corner to complete ..."

#: flatcamEditors/FlatCAMGeoEditor.py:2265
msgid "Done. Rectangle completed."
msgstr "Done. Rectangle completed."

#: flatcamEditors/FlatCAMGeoEditor.py:2291
msgid "Click on next Point or click right mouse button to complete ..."
msgstr "Click on next Point or click right mouse button to complete ..."

#: flatcamEditors/FlatCAMGeoEditor.py:2320
msgid "Done. Polygon completed."
msgstr "Done. Polygon completed."

#: flatcamEditors/FlatCAMGeoEditor.py:2330
#: flatcamEditors/FlatCAMGeoEditor.py:2376
#: flatcamEditors/FlatCAMGrbEditor.py:1085
#: flatcamEditors/FlatCAMGrbEditor.py:1287
msgid "Backtracked one point ..."
msgstr "Backtracked one point ..."

#: flatcamEditors/FlatCAMGeoEditor.py:2358
msgid "Done. Path completed."
msgstr "Done. Path completed."

#: flatcamEditors/FlatCAMGeoEditor.py:2476
msgid "MOVE: No shape selected. Select a shape to move"
msgstr "MOVE: No shape selected. Select a shape to move"

#: flatcamEditors/FlatCAMGeoEditor.py:2478
#: flatcamEditors/FlatCAMGeoEditor.py:2490
msgid " MOVE: Click on reference point ..."
msgstr " MOVE: Click on reference point ..."

#: flatcamEditors/FlatCAMGeoEditor.py:2481
msgid " Click on destination point ..."
msgstr " Click on destination point ..."

#: flatcamEditors/FlatCAMGeoEditor.py:2516
msgid "Done. Geometry(s) Move completed."
msgstr "Done. Geometry(s) Move completed."

#: flatcamEditors/FlatCAMGeoEditor.py:2637
msgid "Done. Geometry(s) Copy completed."
msgstr "Done. Geometry(s) Copy completed."

#: flatcamEditors/FlatCAMGeoEditor.py:2674
msgid ""
"Font not supported. Only Regular, Bold, Italic and BoldItalic are supported. "
"Error"
msgstr ""
"Font not supported. Only Regular, Bold, Italic and BoldItalic are supported. "
"Error"

#: flatcamEditors/FlatCAMGeoEditor.py:2682
msgid "No text to add."
msgstr "No text to add."

#: flatcamEditors/FlatCAMGeoEditor.py:2689
msgid " Done. Adding Text completed."
msgstr " Done. Adding Text completed."

#: flatcamEditors/FlatCAMGeoEditor.py:2717
msgid "Create buffer geometry ..."
msgstr "Create buffer geometry ..."

#: flatcamEditors/FlatCAMGeoEditor.py:2729
#: flatcamEditors/FlatCAMGeoEditor.py:2759
#: flatcamEditors/FlatCAMGeoEditor.py:2789
msgid "Buffer cancelled. No shape selected."
msgstr "Buffer cancelled. No shape selected."

#: flatcamEditors/FlatCAMGeoEditor.py:2754
#: flatcamEditors/FlatCAMGrbEditor.py:4710
msgid "Done. Buffer Tool completed."
msgstr "Done. Buffer Tool completed."

#: flatcamEditors/FlatCAMGeoEditor.py:2784
msgid "Done. Buffer Int Tool completed."
msgstr "Done. Buffer Int Tool completed."

#: flatcamEditors/FlatCAMGeoEditor.py:2814
msgid "Done. Buffer Ext Tool completed."
msgstr "Done. Buffer Ext Tool completed."

#: flatcamEditors/FlatCAMGeoEditor.py:2849
#: flatcamEditors/FlatCAMGrbEditor.py:2068
msgid "Select a shape to act as deletion area ..."
msgstr "Select a shape to act as deletion area ..."

#: flatcamEditors/FlatCAMGeoEditor.py:2851
#: flatcamEditors/FlatCAMGeoEditor.py:2870
#: flatcamEditors/FlatCAMGeoEditor.py:2876
#: flatcamEditors/FlatCAMGrbEditor.py:2070
msgid "Click to pick-up the erase shape..."
msgstr "Click to pick-up the erase shape..."

#: flatcamEditors/FlatCAMGeoEditor.py:2880
#: flatcamEditors/FlatCAMGrbEditor.py:2127
msgid "Click to erase ..."
msgstr "Click to erase ..."

#: flatcamEditors/FlatCAMGeoEditor.py:2910
#: flatcamEditors/FlatCAMGrbEditor.py:2161
msgid "Done. Eraser tool action completed."
msgstr "Done. Eraser tool action completed."

#: flatcamEditors/FlatCAMGeoEditor.py:2953
msgid "Create Paint geometry ..."
msgstr "Create Paint geometry ..."

#: flatcamEditors/FlatCAMGeoEditor.py:2967
#: flatcamEditors/FlatCAMGrbEditor.py:2312
msgid "Shape transformations ..."
msgstr "Shape transformations ..."

#: flatcamEditors/FlatCAMGeoEditor.py:3546
msgid "Editing MultiGeo Geometry, tool"
msgstr "Editing MultiGeo Geometry, tool"

#: flatcamEditors/FlatCAMGeoEditor.py:3548
msgid "with diameter"
msgstr "with diameter"

#: flatcamEditors/FlatCAMGeoEditor.py:3925
msgid "Copy cancelled. No shape selected."
msgstr "Copy cancelled. No shape selected."

#: flatcamEditors/FlatCAMGeoEditor.py:3932 flatcamGUI/FlatCAMGUI.py:2988
#: flatcamGUI/FlatCAMGUI.py:3035 flatcamGUI/FlatCAMGUI.py:3054
#: flatcamGUI/FlatCAMGUI.py:3186 flatcamGUI/FlatCAMGUI.py:3199
#: flatcamGUI/FlatCAMGUI.py:3233 flatcamGUI/FlatCAMGUI.py:3295
msgid "Click on target point."
msgstr "Click on target point."

#: flatcamEditors/FlatCAMGeoEditor.py:4176
#: flatcamEditors/FlatCAMGeoEditor.py:4211
msgid "A selection of at least 2 geo items is required to do Intersection."
msgstr "A selection of at least 2 geo items is required to do Intersection."

#: flatcamEditors/FlatCAMGeoEditor.py:4297
#: flatcamEditors/FlatCAMGeoEditor.py:4406
msgid ""
"Negative buffer value is not accepted. Use Buffer interior to generate an "
"'inside' shape"
msgstr ""
"Negative buffer value is not accepted. Use Buffer interior to generate an "
"'inside' shape"

#: flatcamEditors/FlatCAMGeoEditor.py:4307
#: flatcamEditors/FlatCAMGeoEditor.py:4363
#: flatcamEditors/FlatCAMGeoEditor.py:4415
msgid "Nothing selected for buffering."
msgstr "Nothing selected for buffering."

#: flatcamEditors/FlatCAMGeoEditor.py:4312
#: flatcamEditors/FlatCAMGeoEditor.py:4368
#: flatcamEditors/FlatCAMGeoEditor.py:4420
msgid "Invalid distance for buffering."
msgstr "Invalid distance for buffering."

#: flatcamEditors/FlatCAMGeoEditor.py:4336
#: flatcamEditors/FlatCAMGeoEditor.py:4440
msgid "Failed, the result is empty. Choose a different buffer value."
msgstr "Failed, the result is empty. Choose a different buffer value."

#: flatcamEditors/FlatCAMGeoEditor.py:4347
msgid "Full buffer geometry created."
msgstr "Full buffer geometry created."

#: flatcamEditors/FlatCAMGeoEditor.py:4354
msgid "Negative buffer value is not accepted."
msgstr "Negative buffer value is not accepted."

#: flatcamEditors/FlatCAMGeoEditor.py:4388
msgid "Failed, the result is empty. Choose a smaller buffer value."
msgstr "Failed, the result is empty. Choose a smaller buffer value."

#: flatcamEditors/FlatCAMGeoEditor.py:4399
msgid "Interior buffer geometry created."
msgstr "Interior buffer geometry created."

#: flatcamEditors/FlatCAMGeoEditor.py:4451
msgid "Exterior buffer geometry created."
msgstr "Exterior buffer geometry created."

#: flatcamEditors/FlatCAMGeoEditor.py:4516
msgid "Nothing selected for painting."
msgstr "Nothing selected for painting."

#: flatcamEditors/FlatCAMGeoEditor.py:4523
msgid "Invalid value for"
msgstr "Invalid value for"

#: flatcamEditors/FlatCAMGeoEditor.py:4529
#, python-format
msgid "Could not do Paint. Overlap value has to be less than 1.00 (100%%)."
msgstr "Could not do Paint. Overlap value has to be less than 1.00 (100%%)."

#: flatcamEditors/FlatCAMGeoEditor.py:4588
msgid ""
"Could not do Paint. Try a different combination of parameters. Or a "
"different method of Paint"
msgstr ""
"Could not do Paint. Try a different combination of parameters. Or a "
"different method of Paint"

#: flatcamEditors/FlatCAMGeoEditor.py:4602
msgid "Paint done."
msgstr "Paint done."

#: flatcamEditors/FlatCAMGrbEditor.py:208
msgid "To add an Pad first select a aperture in Aperture Table"
msgstr "To add an Pad first select a aperture in Aperture Table"

#: flatcamEditors/FlatCAMGrbEditor.py:215
#: flatcamEditors/FlatCAMGrbEditor.py:409
msgid "Aperture size is zero. It needs to be greater than zero."
msgstr "Aperture size is zero. It needs to be greater than zero."

#: flatcamEditors/FlatCAMGrbEditor.py:366
#: flatcamEditors/FlatCAMGrbEditor.py:674
msgid ""
"Incompatible aperture type. Select an aperture with type 'C', 'R' or 'O'."
msgstr ""
"Incompatible aperture type. Select an aperture with type 'C', 'R' or 'O'."

#: flatcamEditors/FlatCAMGrbEditor.py:379
msgid "Done. Adding Pad completed."
msgstr "Done. Adding Pad completed."

#: flatcamEditors/FlatCAMGrbEditor.py:401
msgid "To add an Pad Array first select a aperture in Aperture Table"
msgstr "To add an Pad Array first select a aperture in Aperture Table"

#: flatcamEditors/FlatCAMGrbEditor.py:479
msgid "Click on the Pad Circular Array Start position"
msgstr "Click on the Pad Circular Array Start position"

#: flatcamEditors/FlatCAMGrbEditor.py:700
msgid "Too many Pads for the selected spacing angle."
msgstr "Too many Pads for the selected spacing angle."

#: flatcamEditors/FlatCAMGrbEditor.py:723
msgid "Done. Pad Array added."
msgstr "Done. Pad Array added."

#: flatcamEditors/FlatCAMGrbEditor.py:744
msgid "Select shape(s) and then click ..."
msgstr "Select shape(s) and then click ..."

#: flatcamEditors/FlatCAMGrbEditor.py:756
msgid "Failed. Nothing selected."
msgstr "Failed. Nothing selected."

#: flatcamEditors/FlatCAMGrbEditor.py:772
msgid ""
"Failed. Poligonize works only on geometries belonging to the same aperture."
msgstr ""
"Failed. Poligonize works only on geometries belonging to the same aperture."

#: flatcamEditors/FlatCAMGrbEditor.py:826
msgid "Done. Poligonize completed."
msgstr "Done. Poligonize completed."

#: flatcamEditors/FlatCAMGrbEditor.py:879
#: flatcamEditors/FlatCAMGrbEditor.py:1102
#: flatcamEditors/FlatCAMGrbEditor.py:1126
msgid "Corner Mode 1: 45 degrees ..."
msgstr "Corner Mode 1: 45 degrees ..."

#: flatcamEditors/FlatCAMGrbEditor.py:881
msgid "Click on 1st point ..."
msgstr "Click on 1st point ..."

#: flatcamEditors/FlatCAMGrbEditor.py:891
#: flatcamEditors/FlatCAMGrbEditor.py:1202
msgid "Click on next Point or click Right mouse button to complete ..."
msgstr "Click on next Point or click Right mouse button to complete ..."

#: flatcamEditors/FlatCAMGrbEditor.py:1090
#: flatcamEditors/FlatCAMGrbEditor.py:1123
msgid "Corner Mode 2: Reverse 45 degrees ..."
msgstr "Corner Mode 2: Reverse 45 degrees ..."

#: flatcamEditors/FlatCAMGrbEditor.py:1093
#: flatcamEditors/FlatCAMGrbEditor.py:1120
msgid "Corner Mode 3: 90 degrees ..."
msgstr "Corner Mode 3: 90 degrees ..."

#: flatcamEditors/FlatCAMGrbEditor.py:1096
#: flatcamEditors/FlatCAMGrbEditor.py:1117
msgid "Corner Mode 4: Reverse 90 degrees ..."
msgstr "Corner Mode 4: Reverse 90 degrees ..."

#: flatcamEditors/FlatCAMGrbEditor.py:1099
#: flatcamEditors/FlatCAMGrbEditor.py:1114
msgid "Corner Mode 5: Free angle ..."
msgstr "Corner Mode 5: Free angle ..."

#: flatcamEditors/FlatCAMGrbEditor.py:1153
#: flatcamEditors/FlatCAMGrbEditor.py:1319
#: flatcamEditors/FlatCAMGrbEditor.py:1358
msgid "Track Mode 1: 45 degrees ..."
msgstr "Track Mode 1: 45 degrees ..."

#: flatcamEditors/FlatCAMGrbEditor.py:1299
#: flatcamEditors/FlatCAMGrbEditor.py:1353
msgid "Track Mode 2: Reverse 45 degrees ..."
msgstr "Track Mode 2: Reverse 45 degrees ..."

#: flatcamEditors/FlatCAMGrbEditor.py:1304
#: flatcamEditors/FlatCAMGrbEditor.py:1348
msgid "Track Mode 3: 90 degrees ..."
msgstr "Track Mode 3: 90 degrees ..."

#: flatcamEditors/FlatCAMGrbEditor.py:1309
#: flatcamEditors/FlatCAMGrbEditor.py:1343
msgid "Track Mode 4: Reverse 90 degrees ..."
msgstr "Track Mode 4: Reverse 90 degrees ..."

#: flatcamEditors/FlatCAMGrbEditor.py:1314
#: flatcamEditors/FlatCAMGrbEditor.py:1338
msgid "Track Mode 5: Free angle ..."
msgstr "Track Mode 5: Free angle ..."

#: flatcamEditors/FlatCAMGrbEditor.py:1720
msgid "Scale the selected Gerber apertures ..."
msgstr "Scale the selected Gerber apertures ..."

#: flatcamEditors/FlatCAMGrbEditor.py:1762
msgid "Buffer the selected apertures ..."
msgstr "Buffer the selected apertures ..."

#: flatcamEditors/FlatCAMGrbEditor.py:1804
msgid "Mark polygon areas in the edited Gerber ..."
msgstr "Mark polygon areas in the edited Gerber ..."

#: flatcamEditors/FlatCAMGrbEditor.py:1852
msgid "Nothing selected to move"
msgstr "Nothing selected to move"

#: flatcamEditors/FlatCAMGrbEditor.py:1976
msgid "Done. Apertures Move completed."
msgstr "Done. Apertures Move completed."

#: flatcamEditors/FlatCAMGrbEditor.py:2053
msgid "Done. Apertures copied."
msgstr "Done. Apertures copied."

#: flatcamEditors/FlatCAMGrbEditor.py:2354 flatcamGUI/FlatCAMGUI.py:1756
#: flatcamGUI/PreferencesUI.py:1416
msgid "Gerber Editor"
msgstr "Gerber Editor"

#: flatcamEditors/FlatCAMGrbEditor.py:2374 flatcamGUI/ObjectUI.py:192
#: flatcamTools/ToolProperties.py:137
msgid "Apertures"
msgstr "Apertures"

#: flatcamEditors/FlatCAMGrbEditor.py:2376 flatcamGUI/ObjectUI.py:194
msgid "Apertures Table for the Gerber Object."
msgstr "Apertures Table for the Gerber Object."

#: flatcamEditors/FlatCAMGrbEditor.py:2387
#: flatcamEditors/FlatCAMGrbEditor.py:3854 flatcamGUI/ObjectUI.py:227
msgid "Code"
msgstr "Code"

#: flatcamEditors/FlatCAMGrbEditor.py:2387
#: flatcamEditors/FlatCAMGrbEditor.py:3854 flatcamGUI/ObjectUI.py:227
#: flatcamGUI/ObjectUI.py:957 flatcamGUI/ObjectUI.py:1522
msgid "Type"
msgstr "Type"

#: flatcamEditors/FlatCAMGrbEditor.py:2387
#: flatcamEditors/FlatCAMGrbEditor.py:3854 flatcamGUI/ObjectUI.py:227
msgid "Size"
msgstr "Size"

#: flatcamEditors/FlatCAMGrbEditor.py:2387
#: flatcamEditors/FlatCAMGrbEditor.py:3854 flatcamGUI/ObjectUI.py:227
msgid "Dim"
msgstr "Dim"

#: flatcamEditors/FlatCAMGrbEditor.py:2391 flatcamGUI/ObjectUI.py:231
msgid "Index"
msgstr "Index"

#: flatcamEditors/FlatCAMGrbEditor.py:2393
#: flatcamEditors/FlatCAMGrbEditor.py:2420 flatcamGUI/ObjectUI.py:233
msgid "Aperture Code"
msgstr "Aperture Code"

#: flatcamEditors/FlatCAMGrbEditor.py:2395 flatcamGUI/ObjectUI.py:235
msgid "Type of aperture: circular, rectangle, macros etc"
msgstr "Type of aperture: circular, rectangle, macros etc"

#: flatcamEditors/FlatCAMGrbEditor.py:2397 flatcamGUI/ObjectUI.py:237
msgid "Aperture Size:"
msgstr "Aperture Size:"

#: flatcamEditors/FlatCAMGrbEditor.py:2399 flatcamGUI/ObjectUI.py:239
msgid ""
"Aperture Dimensions:\n"
" - (width, height) for R, O type.\n"
" - (dia, nVertices) for P type"
msgstr ""
"Aperture Dimensions:\n"
" - (width, height) for R, O type.\n"
" - (dia, nVertices) for P type"

#: flatcamEditors/FlatCAMGrbEditor.py:2422 flatcamGUI/PreferencesUI.py:1445
msgid "Code for the new aperture"
msgstr "Code for the new aperture"

#: flatcamEditors/FlatCAMGrbEditor.py:2430
msgid "Aperture Size"
msgstr "Aperture Size"

#: flatcamEditors/FlatCAMGrbEditor.py:2432
msgid ""
"Size for the new aperture.\n"
"If aperture type is 'R' or 'O' then\n"
"this value is automatically\n"
"calculated as:\n"
"sqrt(width**2 + height**2)"
msgstr ""
"Size for the new aperture.\n"
"If aperture type is 'R' or 'O' then\n"
"this value is automatically\n"
"calculated as:\n"
"sqrt(width**2 + height**2)"

#: flatcamEditors/FlatCAMGrbEditor.py:2444
msgid "Aperture Type"
msgstr "Aperture Type"

#: flatcamEditors/FlatCAMGrbEditor.py:2446
msgid ""
"Select the type of new aperture. Can be:\n"
"C = circular\n"
"R = rectangular\n"
"O = oblong"
msgstr ""
"Select the type of new aperture. Can be:\n"
"C = circular\n"
"R = rectangular\n"
"O = oblong"

#: flatcamEditors/FlatCAMGrbEditor.py:2457
msgid "Aperture Dim"
msgstr "Aperture Dim"

#: flatcamEditors/FlatCAMGrbEditor.py:2459
msgid ""
"Dimensions for the new aperture.\n"
"Active only for rectangular apertures (type R).\n"
"The format is (width, height)"
msgstr ""
"Dimensions for the new aperture.\n"
"Active only for rectangular apertures (type R).\n"
"The format is (width, height)"

#: flatcamEditors/FlatCAMGrbEditor.py:2468
msgid "Add/Delete Aperture"
msgstr "Add/Delete Aperture"

#: flatcamEditors/FlatCAMGrbEditor.py:2470
msgid "Add/Delete an aperture in the aperture table"
msgstr "Add/Delete an aperture in the aperture table"

#: flatcamEditors/FlatCAMGrbEditor.py:2479
msgid "Add a new aperture to the aperture list."
msgstr "Add a new aperture to the aperture list."

#: flatcamEditors/FlatCAMGrbEditor.py:2484
msgid "Delete a aperture in the aperture list"
msgstr "Delete a aperture in the aperture list"

#: flatcamEditors/FlatCAMGrbEditor.py:2501
msgid "Buffer Aperture"
msgstr "Buffer Aperture"

#: flatcamEditors/FlatCAMGrbEditor.py:2503
msgid "Buffer a aperture in the aperture list"
msgstr "Buffer a aperture in the aperture list"

#: flatcamEditors/FlatCAMGrbEditor.py:2513 flatcamGUI/PreferencesUI.py:1568
msgid "Buffer distance"
msgstr "Buffer distance"

#: flatcamEditors/FlatCAMGrbEditor.py:2514
msgid "Buffer corner"
msgstr "Buffer corner"

#: flatcamEditors/FlatCAMGrbEditor.py:2516
msgid ""
"There are 3 types of corners:\n"
" - 'Round': the corner is rounded.\n"
" - 'Square:' the corner is met in a sharp angle.\n"
" - 'Beveled:' the corner is a line that directly connects the features "
"meeting in the corner"
msgstr ""
"There are 3 types of corners:\n"
" - 'Round': the corner is rounded.\n"
" - 'Square:' the corner is met in a sharp angle.\n"
" - 'Beveled:' the corner is a line that directly connects the features "
"meeting in the corner"

#: flatcamEditors/FlatCAMGrbEditor.py:2531 flatcamGUI/FlatCAMGUI.py:750
#: flatcamGUI/FlatCAMGUI.py:1691 flatcamGUI/FlatCAMGUI.py:1742
#: flatcamGUI/FlatCAMGUI.py:1769 flatcamGUI/FlatCAMGUI.py:2185
msgid "Buffer"
msgstr "Buffer"

#: flatcamEditors/FlatCAMGrbEditor.py:2546
msgid "Scale Aperture"
msgstr "Scale Aperture"

#: flatcamEditors/FlatCAMGrbEditor.py:2548
msgid "Scale a aperture in the aperture list"
msgstr "Scale a aperture in the aperture list"

#: flatcamEditors/FlatCAMGrbEditor.py:2556 flatcamGUI/PreferencesUI.py:1581
msgid "Scale factor"
msgstr "Scale factor"

#: flatcamEditors/FlatCAMGrbEditor.py:2558
msgid ""
"The factor by which to scale the selected aperture.\n"
"Values can be between 0.0000 and 999.9999"
msgstr ""
"The factor by which to scale the selected aperture.\n"
"Values can be between 0.0000 and 999.9999"

#: flatcamEditors/FlatCAMGrbEditor.py:2584
msgid "Mark polygon areas"
msgstr "Mark polygon areas"

#: flatcamEditors/FlatCAMGrbEditor.py:2586
msgid "Mark the polygon areas."
msgstr "Mark the polygon areas."

#: flatcamEditors/FlatCAMGrbEditor.py:2594
msgid "Area UPPER threshold"
msgstr "Area UPPER threshold"

#: flatcamEditors/FlatCAMGrbEditor.py:2596
msgid ""
"The threshold value, all areas less than this are marked.\n"
"Can have a value between 0.0000 and 9999.9999"
msgstr ""
"The threshold value, all areas less than this are marked.\n"
"Can have a value between 0.0000 and 9999.9999"

#: flatcamEditors/FlatCAMGrbEditor.py:2602
msgid "Area LOWER threshold"
msgstr "Area LOWER threshold"

#: flatcamEditors/FlatCAMGrbEditor.py:2604
msgid ""
"The threshold value, all areas more than this are marked.\n"
"Can have a value between 0.0000 and 9999.9999"
msgstr ""
"The threshold value, all areas more than this are marked.\n"
"Can have a value between 0.0000 and 9999.9999"

#: flatcamEditors/FlatCAMGrbEditor.py:2617
msgid "Go"
msgstr "Go"

#: flatcamEditors/FlatCAMGrbEditor.py:2636 flatcamGUI/FlatCAMGUI.py:740
#: flatcamGUI/FlatCAMGUI.py:1691 flatcamGUI/FlatCAMGUI.py:2175
msgid "Add Pad Array"
msgstr "Add Pad Array"

#: flatcamEditors/FlatCAMGrbEditor.py:2638
msgid "Add an array of pads (linear or circular array)"
msgstr "Add an array of pads (linear or circular array)"

#: flatcamEditors/FlatCAMGrbEditor.py:2644
msgid ""
"Select the type of pads array to create.\n"
"It can be Linear X(Y) or Circular"
msgstr ""
"Select the type of pads array to create.\n"
"It can be Linear X(Y) or Circular"

#: flatcamEditors/FlatCAMGrbEditor.py:2655 flatcamGUI/PreferencesUI.py:1480
msgid "Nr of pads"
msgstr "Nr of pads"

#: flatcamEditors/FlatCAMGrbEditor.py:2657 flatcamGUI/PreferencesUI.py:1482
msgid "Specify how many pads to be in the array."
msgstr "Specify how many pads to be in the array."

#: flatcamEditors/FlatCAMGrbEditor.py:3153
#: flatcamEditors/FlatCAMGrbEditor.py:3157
msgid "Aperture code value is missing or wrong format. Add it and retry."
msgstr "Aperture code value is missing or wrong format. Add it and retry."

#: flatcamEditors/FlatCAMGrbEditor.py:3193
msgid ""
"Aperture dimensions value is missing or wrong format. Add it in format "
"(width, height) and retry."
msgstr ""
"Aperture dimensions value is missing or wrong format. Add it in format "
"(width, height) and retry."

#: flatcamEditors/FlatCAMGrbEditor.py:3206
msgid "Aperture size value is missing or wrong format. Add it and retry."
msgstr "Aperture size value is missing or wrong format. Add it and retry."

#: flatcamEditors/FlatCAMGrbEditor.py:3217
msgid "Aperture already in the aperture table."
msgstr "Aperture already in the aperture table."

#: flatcamEditors/FlatCAMGrbEditor.py:3225
msgid "Added new aperture with code"
msgstr "Added new aperture with code"

#: flatcamEditors/FlatCAMGrbEditor.py:3254
msgid " Select an aperture in Aperture Table"
msgstr " Select an aperture in Aperture Table"

#: flatcamEditors/FlatCAMGrbEditor.py:3261
msgid "Select an aperture in Aperture Table -->"
msgstr "Select an aperture in Aperture Table -->"

#: flatcamEditors/FlatCAMGrbEditor.py:3285
msgid "Deleted aperture with code"
msgstr "Deleted aperture with code"

#: flatcamEditors/FlatCAMGrbEditor.py:3780
msgid "Adding aperture"
msgstr "Adding aperture"

#: flatcamEditors/FlatCAMGrbEditor.py:3780
msgid "geo"
msgstr "geo"

#: flatcamEditors/FlatCAMGrbEditor.py:3973
msgid ""
"There are no Aperture definitions in the file. Aborting Gerber creation."
msgstr ""
"There are no Aperture definitions in the file. Aborting Gerber creation."

#: flatcamEditors/FlatCAMGrbEditor.py:3983
msgid "Creating Gerber."
msgstr "Creating Gerber."

#: flatcamEditors/FlatCAMGrbEditor.py:3992
msgid "Done. Gerber editing finished."
msgstr "Done. Gerber editing finished."

#: flatcamEditors/FlatCAMGrbEditor.py:4009
msgid "Cancelled. No aperture is selected"
msgstr "Cancelled. No aperture is selected"

#: flatcamEditors/FlatCAMGrbEditor.py:4541
msgid "Failed. No aperture geometry is selected."
msgstr "Failed. No aperture geometry is selected."

#: flatcamEditors/FlatCAMGrbEditor.py:4550
msgid "Done. Apertures geometry deleted."
msgstr "Done. Apertures geometry deleted."

#: flatcamEditors/FlatCAMGrbEditor.py:4693
msgid "No aperture to buffer. Select at least one aperture and try again."
msgstr "No aperture to buffer. Select at least one aperture and try again."

#: flatcamEditors/FlatCAMGrbEditor.py:4706
msgid "Failed."
msgstr "Failed."

#: flatcamEditors/FlatCAMGrbEditor.py:4725
msgid "Scale factor value is missing or wrong format. Add it and retry."
msgstr "Scale factor value is missing or wrong format. Add it and retry."

#: flatcamEditors/FlatCAMGrbEditor.py:4757
msgid "No aperture to scale. Select at least one aperture and try again."
msgstr "No aperture to scale. Select at least one aperture and try again."

#: flatcamEditors/FlatCAMGrbEditor.py:4773
msgid "Done. Scale Tool completed."
msgstr "Done. Scale Tool completed."

#: flatcamEditors/FlatCAMGrbEditor.py:4811
msgid "Polygon areas marked."
msgstr "Polygon areas marked."

#: flatcamEditors/FlatCAMGrbEditor.py:4814
msgid "There are no polygons to mark area."
msgstr "There are no polygons to mark area."

#: flatcamEditors/FlatCAMGrbEditor.py:5585
msgid "Rotation action was not executed."
msgstr "Rotation action was not executed."

#: flatcamEditors/FlatCAMGrbEditor.py:5724
msgid "Skew action was not executed."
msgstr "Skew action was not executed."

#: flatcamEditors/FlatCAMGrbEditor.py:5794
msgid "Scale action was not executed."
msgstr "Scale action was not executed."

#: flatcamEditors/FlatCAMGrbEditor.py:5843
msgid "Offset action was not executed."
msgstr "Offset action was not executed."

#: flatcamEditors/FlatCAMGrbEditor.py:5899
msgid "Geometry shape offset Y cancelled"
msgstr "Geometry shape offset Y cancelled"

#: flatcamEditors/FlatCAMGrbEditor.py:5916
msgid "Geometry shape skew X cancelled"
msgstr "Geometry shape skew X cancelled"

#: flatcamEditors/FlatCAMGrbEditor.py:5933
msgid "Geometry shape skew Y cancelled"
msgstr "Geometry shape skew Y cancelled"

#: flatcamGUI/FlatCAMGUI.py:46
msgid "&File"
msgstr "&File"

#: flatcamGUI/FlatCAMGUI.py:51
msgid "&New Project ...\tCTRL+N"
msgstr "&New Project ...\tCTRL+N"

#: flatcamGUI/FlatCAMGUI.py:53
msgid "Will create a new, blank project"
msgstr "Will create a new, blank project"

#: flatcamGUI/FlatCAMGUI.py:58
msgid "&New"
msgstr "&New"

#: flatcamGUI/FlatCAMGUI.py:61
msgid "Geometry\tN"
msgstr "Geometry\tN"

#: flatcamGUI/FlatCAMGUI.py:63
msgid "Will create a new, empty Geometry Object."
msgstr "Will create a new, empty Geometry Object."

#: flatcamGUI/FlatCAMGUI.py:65
msgid "Gerber\tB"
msgstr "Gerber\tB"

#: flatcamGUI/FlatCAMGUI.py:67
msgid "Will create a new, empty Gerber Object."
msgstr "Will create a new, empty Gerber Object."

#: flatcamGUI/FlatCAMGUI.py:69
msgid "Excellon\tL"
msgstr "Excellon\tL"

#: flatcamGUI/FlatCAMGUI.py:71
msgid "Will create a new, empty Excellon Object."
msgstr "Will create a new, empty Excellon Object."

#: flatcamGUI/FlatCAMGUI.py:74 flatcamGUI/FlatCAMGUI.py:3547
#: flatcamTools/ToolPcbWizard.py:62 flatcamTools/ToolPcbWizard.py:69
msgid "Open"
msgstr "Open"

#: flatcamGUI/FlatCAMGUI.py:78
msgid "Open &Project ..."
msgstr "Open &Project ..."

#: flatcamGUI/FlatCAMGUI.py:84 flatcamGUI/FlatCAMGUI.py:3556
msgid "Open &Gerber ...\tCTRL+G"
msgstr "Open &Gerber ...\tCTRL+G"

#: flatcamGUI/FlatCAMGUI.py:89 flatcamGUI/FlatCAMGUI.py:3561
msgid "Open &Excellon ...\tCTRL+E"
msgstr "Open &Excellon ...\tCTRL+E"

#: flatcamGUI/FlatCAMGUI.py:93 flatcamGUI/FlatCAMGUI.py:3565
msgid "Open G-&Code ..."
msgstr "Open G-&Code ..."

#: flatcamGUI/FlatCAMGUI.py:99
msgid "Open Config ..."
msgstr "Open Config ..."

#: flatcamGUI/FlatCAMGUI.py:103
msgid "Recent projects"
msgstr "Recent projects"

#: flatcamGUI/FlatCAMGUI.py:104
msgid "Recent files"
msgstr "Recent files"

#: flatcamGUI/FlatCAMGUI.py:110
msgid "Scripting"
msgstr "Scripting"

#: flatcamGUI/FlatCAMGUI.py:113 flatcamGUI/FlatCAMGUI.py:665
#: flatcamGUI/FlatCAMGUI.py:2096
msgid "New Script ..."
msgstr "New Script ..."

#: flatcamGUI/FlatCAMGUI.py:114 flatcamGUI/FlatCAMGUI.py:666
#: flatcamGUI/FlatCAMGUI.py:2097
msgid "Open Script ..."
msgstr "Open Script ..."

#: flatcamGUI/FlatCAMGUI.py:116 flatcamGUI/FlatCAMGUI.py:667
#: flatcamGUI/FlatCAMGUI.py:2098 flatcamGUI/FlatCAMGUI.py:3536
msgid "Run Script ..."
msgstr "Run Script ..."

#: flatcamGUI/FlatCAMGUI.py:118 flatcamGUI/FlatCAMGUI.py:3538
msgid ""
"Will run the opened Tcl Script thus\n"
"enabling the automation of certain\n"
"functions of FlatCAM."
msgstr ""
"Will run the opened Tcl Script thus\n"
"enabling the automation of certain\n"
"functions of FlatCAM."

#: flatcamGUI/FlatCAMGUI.py:131
msgid "Import"
msgstr "Import"

#: flatcamGUI/FlatCAMGUI.py:133
msgid "&SVG as Geometry Object ..."
msgstr "&SVG as Geometry Object ..."

#: flatcamGUI/FlatCAMGUI.py:136
msgid "&SVG as Gerber Object ..."
msgstr "&SVG as Gerber Object ..."

#: flatcamGUI/FlatCAMGUI.py:141
msgid "&DXF as Geometry Object ..."
msgstr "&DXF as Geometry Object ..."

#: flatcamGUI/FlatCAMGUI.py:144
msgid "&DXF as Gerber Object ..."
msgstr "&DXF as Gerber Object ..."

#: flatcamGUI/FlatCAMGUI.py:149
msgid "Export"
msgstr "Export"

#: flatcamGUI/FlatCAMGUI.py:152
msgid "Export &SVG ..."
msgstr "Export &SVG ..."

#: flatcamGUI/FlatCAMGUI.py:155
msgid "Export DXF ..."
msgstr "Export DXF ..."

#: flatcamGUI/FlatCAMGUI.py:160
msgid "Export &PNG ..."
msgstr "Export &PNG ..."

#: flatcamGUI/FlatCAMGUI.py:162
msgid ""
"Will export an image in PNG format,\n"
"the saved image will contain the visual \n"
"information currently in FlatCAM Plot Area."
msgstr ""
"Will export an image in PNG format,\n"
"the saved image will contain the visual \n"
"information currently in FlatCAM Plot Area."

#: flatcamGUI/FlatCAMGUI.py:171
msgid "Export &Excellon ..."
msgstr "Export &Excellon ..."

#: flatcamGUI/FlatCAMGUI.py:173
msgid ""
"Will export an Excellon Object as Excellon file,\n"
"the coordinates format, the file units and zeros\n"
"are set in Preferences -> Excellon Export."
msgstr ""
"Will export an Excellon Object as Excellon file,\n"
"the coordinates format, the file units and zeros\n"
"are set in Preferences -> Excellon Export."

#: flatcamGUI/FlatCAMGUI.py:180
msgid "Export &Gerber ..."
msgstr "Export &Gerber ..."

#: flatcamGUI/FlatCAMGUI.py:182
msgid ""
"Will export an Gerber Object as Gerber file,\n"
"the coordinates format, the file units and zeros\n"
"are set in Preferences -> Gerber Export."
msgstr ""
"Will export an Gerber Object as Gerber file,\n"
"the coordinates format, the file units and zeros\n"
"are set in Preferences -> Gerber Export."

#: flatcamGUI/FlatCAMGUI.py:198
msgid "Backup"
msgstr "Backup"

#: flatcamGUI/FlatCAMGUI.py:202
msgid "Import Preferences from file ..."
msgstr "Import Preferences from file ..."

#: flatcamGUI/FlatCAMGUI.py:207
msgid "Export Preferences to file ..."
msgstr "Export Preferences to file ..."

#: flatcamGUI/FlatCAMGUI.py:213 flatcamGUI/FlatCAMGUI.py:553
msgid "Save"
msgstr "Save"

#: flatcamGUI/FlatCAMGUI.py:216
msgid "&Save Project ..."
msgstr "&Save Project ..."

#: flatcamGUI/FlatCAMGUI.py:221
msgid "Save Project &As ...\tCTRL+S"
msgstr "Save Project &As ...\tCTRL+S"

#: flatcamGUI/FlatCAMGUI.py:226
msgid "Save Project C&opy ..."
msgstr "Save Project C&opy ..."

#: flatcamGUI/FlatCAMGUI.py:233
msgid "E&xit"
msgstr "E&xit"

#: flatcamGUI/FlatCAMGUI.py:239
msgid "&Edit"
msgstr "&Edit"

#: flatcamGUI/FlatCAMGUI.py:242
msgid "Edit Object\tE"
msgstr "Edit Object\tE"

#: flatcamGUI/FlatCAMGUI.py:243
msgid "Close Editor\tCTRL+S"
msgstr "Close Editor\tCTRL+S"

#: flatcamGUI/FlatCAMGUI.py:251
msgid "Conversion"
msgstr "Conversion"

#: flatcamGUI/FlatCAMGUI.py:253
msgid "&Join Geo/Gerber/Exc -> Geo"
msgstr "&Join Geo/Gerber/Exc -> Geo"

#: flatcamGUI/FlatCAMGUI.py:255
msgid ""
"Merge a selection of objects, which can be of type:\n"
"- Gerber\n"
"- Excellon\n"
"- Geometry\n"
"into a new combo Geometry object."
msgstr ""
"Merge a selection of objects, which can be of type:\n"
"- Gerber\n"
"- Excellon\n"
"- Geometry\n"
"into a new combo Geometry object."

#: flatcamGUI/FlatCAMGUI.py:262
msgid "Join Excellon(s) -> Excellon"
msgstr "Join Excellon(s) -> Excellon"

#: flatcamGUI/FlatCAMGUI.py:264
msgid "Merge a selection of Excellon objects into a new combo Excellon object."
msgstr ""
"Merge a selection of Excellon objects into a new combo Excellon object."

#: flatcamGUI/FlatCAMGUI.py:267
msgid "Join Gerber(s) -> Gerber"
msgstr "Join Gerber(s) -> Gerber"

#: flatcamGUI/FlatCAMGUI.py:269
msgid "Merge a selection of Gerber objects into a new combo Gerber object."
msgstr "Merge a selection of Gerber objects into a new combo Gerber object."

#: flatcamGUI/FlatCAMGUI.py:274
msgid "Convert Single to MultiGeo"
msgstr "Convert Single to MultiGeo"

#: flatcamGUI/FlatCAMGUI.py:276
msgid ""
"Will convert a Geometry object from single_geometry type\n"
"to a multi_geometry type."
msgstr ""
"Will convert a Geometry object from single_geometry type\n"
"to a multi_geometry type."

#: flatcamGUI/FlatCAMGUI.py:280
msgid "Convert Multi to SingleGeo"
msgstr "Convert Multi to SingleGeo"

#: flatcamGUI/FlatCAMGUI.py:282
msgid ""
"Will convert a Geometry object from multi_geometry type\n"
"to a single_geometry type."
msgstr ""
"Will convert a Geometry object from multi_geometry type\n"
"to a single_geometry type."

#: flatcamGUI/FlatCAMGUI.py:288
msgid "Convert Any to Geo"
msgstr "Convert Any to Geo"

#: flatcamGUI/FlatCAMGUI.py:290
msgid "Convert Any to Gerber"
msgstr "Convert Any to Gerber"

#: flatcamGUI/FlatCAMGUI.py:295
msgid "&Copy\tCTRL+C"
msgstr "&Copy\tCTRL+C"

#: flatcamGUI/FlatCAMGUI.py:299
msgid "&Delete\tDEL"
msgstr "&Delete\tDEL"

#: flatcamGUI/FlatCAMGUI.py:303
msgid "Se&t Origin\tO"
msgstr "Se&t Origin\tO"

#: flatcamGUI/FlatCAMGUI.py:304
msgid "Jump to Location\tJ"
msgstr "Jump to Location\tJ"

#: flatcamGUI/FlatCAMGUI.py:309
msgid "Toggle Units\tQ"
msgstr "Toggle Units\tQ"

#: flatcamGUI/FlatCAMGUI.py:310
msgid "&Select All\tCTRL+A"
msgstr "&Select All\tCTRL+A"

#: flatcamGUI/FlatCAMGUI.py:314
msgid "&Preferences\tSHIFT+P"
msgstr "&Preferences\tSHIFT+P"

#: flatcamGUI/FlatCAMGUI.py:317
msgid "&Options"
msgstr "&Options"

#: flatcamGUI/FlatCAMGUI.py:332
msgid "&Rotate Selection\tSHIFT+(R)"
msgstr "&Rotate Selection\tSHIFT+(R)"

#: flatcamGUI/FlatCAMGUI.py:337
msgid "&Skew on X axis\tSHIFT+X"
msgstr "&Skew on X axis\tSHIFT+X"

#: flatcamGUI/FlatCAMGUI.py:339
msgid "S&kew on Y axis\tSHIFT+Y"
msgstr "S&kew on Y axis\tSHIFT+Y"

#: flatcamGUI/FlatCAMGUI.py:344
msgid "Flip on &X axis\tX"
msgstr "Flip on &X axis\tX"

#: flatcamGUI/FlatCAMGUI.py:346
msgid "Flip on &Y axis\tY"
msgstr "Flip on &Y axis\tY"

#: flatcamGUI/FlatCAMGUI.py:351
msgid "View source\tALT+S"
msgstr "View source\tALT+S"

#: flatcamGUI/FlatCAMGUI.py:356
msgid "&View"
msgstr "&View"

#: flatcamGUI/FlatCAMGUI.py:357
msgid "Enable all plots\tALT+1"
msgstr "Enable all plots\tALT+1"

#: flatcamGUI/FlatCAMGUI.py:359
msgid "Disable all plots\tALT+2"
msgstr "Disable all plots\tALT+2"

#: flatcamGUI/FlatCAMGUI.py:361
msgid "Disable non-selected\tALT+3"
msgstr "Disable non-selected\tALT+3"

#: flatcamGUI/FlatCAMGUI.py:364
msgid "&Zoom Fit\tV"
msgstr "&Zoom Fit\tV"

#: flatcamGUI/FlatCAMGUI.py:365
msgid "&Zoom In\t="
msgstr "&Zoom In\t="

#: flatcamGUI/FlatCAMGUI.py:366
msgid "&Zoom Out\t-"
msgstr "&Zoom Out\t-"

#: flatcamGUI/FlatCAMGUI.py:370
msgid "Redraw All\tF5"
msgstr "Redraw All\tF5"

#: flatcamGUI/FlatCAMGUI.py:374
msgid "Toggle Code Editor\tCTRL+E"
msgstr "Toggle Code Editor\tCTRL+E"

#: flatcamGUI/FlatCAMGUI.py:377
msgid "&Toggle FullScreen\tALT+F10"
msgstr "&Toggle FullScreen\tALT+F10"

#: flatcamGUI/FlatCAMGUI.py:379
msgid "&Toggle Plot Area\tCTRL+F10"
msgstr "&Toggle Plot Area\tCTRL+F10"

#: flatcamGUI/FlatCAMGUI.py:381
msgid "&Toggle Project/Sel/Tool\t`"
msgstr "&Toggle Project/Sel/Tool\t`"

#: flatcamGUI/FlatCAMGUI.py:384
msgid "&Toggle Grid Snap\tG"
msgstr "&Toggle Grid Snap\tG"

#: flatcamGUI/FlatCAMGUI.py:386
msgid "&Toggle Axis\tSHIFT+G"
msgstr "&Toggle Axis\tSHIFT+G"

#: flatcamGUI/FlatCAMGUI.py:389
msgid "Toggle Workspace\tSHIFT+W"
msgstr "Toggle Workspace\tSHIFT+W"

#: flatcamGUI/FlatCAMGUI.py:392
msgid "&Tool"
msgstr "&Tool"

#: flatcamGUI/FlatCAMGUI.py:394
msgid "&Command Line\tS"
msgstr "&Command Line\tS"

#: flatcamGUI/FlatCAMGUI.py:397
msgid "&Help"
msgstr "&Help"

#: flatcamGUI/FlatCAMGUI.py:398
msgid "Online Help\tF1"
msgstr "Online Help\tF1"

#: flatcamGUI/FlatCAMGUI.py:399
msgid "FlatCAM.org"
msgstr "FlatCAM.org"

#: flatcamGUI/FlatCAMGUI.py:401
msgid "Report a bug"
msgstr "Report a bug"

#: flatcamGUI/FlatCAMGUI.py:404
#| msgid "Excellon Optimization"
msgid "Excellon Specification"
msgstr "Excellon Specification"

#: flatcamGUI/FlatCAMGUI.py:406
#| msgid "Gerber Options"
msgid "Gerber Specification"
msgstr "Gerber Specification"

#: flatcamGUI/FlatCAMGUI.py:411
msgid "Shortcuts List\tF3"
msgstr "Shortcuts List\tF3"

#: flatcamGUI/FlatCAMGUI.py:412
msgid "YouTube Channel\tF4"
msgstr "YouTube Channel\tF4"

#: flatcamGUI/FlatCAMGUI.py:421
msgid "Add Circle\tO"
msgstr "Add Circle\tO"

#: flatcamGUI/FlatCAMGUI.py:423
msgid "Add Arc\tA"
msgstr "Add Arc\tA"

#: flatcamGUI/FlatCAMGUI.py:426
msgid "Add Rectangle\tR"
msgstr "Add Rectangle\tR"

#: flatcamGUI/FlatCAMGUI.py:429
msgid "Add Polygon\tN"
msgstr "Add Polygon\tN"

#: flatcamGUI/FlatCAMGUI.py:431
msgid "Add Path\tP"
msgstr "Add Path\tP"

#: flatcamGUI/FlatCAMGUI.py:433
msgid "Add Text\tT"
msgstr "Add Text\tT"

#: flatcamGUI/FlatCAMGUI.py:436
msgid "Polygon Union\tU"
msgstr "Polygon Union\tU"

#: flatcamGUI/FlatCAMGUI.py:438
msgid "Polygon Intersection\tE"
msgstr "Polygon Intersection\tE"

#: flatcamGUI/FlatCAMGUI.py:440
msgid "Polygon Subtraction\tS"
msgstr "Polygon Subtraction\tS"

#: flatcamGUI/FlatCAMGUI.py:444
msgid "Cut Path\tX"
msgstr "Cut Path\tX"

#: flatcamGUI/FlatCAMGUI.py:446
msgid "Copy Geom\tC"
msgstr "Copy Geom\tC"

#: flatcamGUI/FlatCAMGUI.py:448
msgid "Delete Shape\tDEL"
msgstr "Delete Shape\tDEL"

#: flatcamGUI/FlatCAMGUI.py:451 flatcamGUI/FlatCAMGUI.py:528
msgid "Move\tM"
msgstr "Move\tM"

#: flatcamGUI/FlatCAMGUI.py:453
msgid "Buffer Tool\tB"
msgstr "Buffer Tool\tB"

#: flatcamGUI/FlatCAMGUI.py:456
msgid "Paint Tool\tI"
msgstr "Paint Tool\tI"

#: flatcamGUI/FlatCAMGUI.py:459
msgid "Transform Tool\tALT+R"
msgstr "Transform Tool\tALT+R"

#: flatcamGUI/FlatCAMGUI.py:463
msgid "Toggle Corner Snap\tK"
msgstr "Toggle Corner Snap\tK"

#: flatcamGUI/FlatCAMGUI.py:466
msgid ">Excellon Editor<"
msgstr ">Excellon Editor<"

#: flatcamGUI/FlatCAMGUI.py:470
msgid "Add Drill Array\tA"
msgstr "Add Drill Array\tA"

#: flatcamGUI/FlatCAMGUI.py:472
msgid "Add Drill\tD"
msgstr "Add Drill\tD"

#: flatcamGUI/FlatCAMGUI.py:476
msgid "Add Slot Array\tQ"
msgstr "Add Slot Array\tQ"

#: flatcamGUI/FlatCAMGUI.py:478
msgid "Add Slot\tW"
msgstr "Add Slot\tW"

#: flatcamGUI/FlatCAMGUI.py:482
msgid "Resize Drill(S)\tR"
msgstr "Resize Drill(S)\tR"

#: flatcamGUI/FlatCAMGUI.py:484 flatcamGUI/FlatCAMGUI.py:523
msgid "Copy\tC"
msgstr "Copy\tC"

#: flatcamGUI/FlatCAMGUI.py:486 flatcamGUI/FlatCAMGUI.py:525
msgid "Delete\tDEL"
msgstr "Delete\tDEL"

#: flatcamGUI/FlatCAMGUI.py:491
msgid "Move Drill(s)\tM"
msgstr "Move Drill(s)\tM"

#: flatcamGUI/FlatCAMGUI.py:494
msgid ">Gerber Editor<"
msgstr ">Gerber Editor<"

#: flatcamGUI/FlatCAMGUI.py:498
msgid "Add Pad\tP"
msgstr "Add Pad\tP"

#: flatcamGUI/FlatCAMGUI.py:500
msgid "Add Pad Array\tA"
msgstr "Add Pad Array\tA"

#: flatcamGUI/FlatCAMGUI.py:502
msgid "Add Track\tT"
msgstr "Add Track\tT"

#: flatcamGUI/FlatCAMGUI.py:504
msgid "Add Region\tN"
msgstr "Add Region\tN"

#: flatcamGUI/FlatCAMGUI.py:508
msgid "Poligonize\tALT+N"
msgstr "Poligonize\tALT+N"

#: flatcamGUI/FlatCAMGUI.py:510
msgid "Add SemiDisc\tE"
msgstr "Add SemiDisc\tE"

#: flatcamGUI/FlatCAMGUI.py:511
msgid "Add Disc\tD"
msgstr "Add Disc\tD"

#: flatcamGUI/FlatCAMGUI.py:513
msgid "Buffer\tB"
msgstr "Buffer\tB"

#: flatcamGUI/FlatCAMGUI.py:514
msgid "Scale\tS"
msgstr "Scale\tS"

#: flatcamGUI/FlatCAMGUI.py:516
msgid "Mark Area\tALT+A"
msgstr "Mark Area\tALT+A"

#: flatcamGUI/FlatCAMGUI.py:518
msgid "Eraser\tCTRL+E"
msgstr "Eraser\tCTRL+E"

#: flatcamGUI/FlatCAMGUI.py:520
msgid "Transform\tALT+R"
msgstr "Transform\tALT+R"

#: flatcamGUI/FlatCAMGUI.py:544
msgid "Enable Plot"
msgstr "Enable Plot"

#: flatcamGUI/FlatCAMGUI.py:545
msgid "Disable Plot"
msgstr "Disable Plot"

#: flatcamGUI/FlatCAMGUI.py:547
msgid "Generate CNC"
msgstr "Generate CNC"

#: flatcamGUI/FlatCAMGUI.py:548
msgid "View Source"
msgstr "View Source"

#: flatcamGUI/FlatCAMGUI.py:550 flatcamGUI/FlatCAMGUI.py:1790
msgid "Edit"
msgstr "Edit"

#: flatcamGUI/FlatCAMGUI.py:556 flatcamGUI/FlatCAMGUI.py:1796
#: flatcamTools/ToolProperties.py:24
msgid "Properties"
msgstr "Properties"

#: flatcamGUI/FlatCAMGUI.py:585
msgid "File Toolbar"
msgstr "File Toolbar"

#: flatcamGUI/FlatCAMGUI.py:589
msgid "Edit Toolbar"
msgstr "Edit Toolbar"

#: flatcamGUI/FlatCAMGUI.py:593
msgid "View Toolbar"
msgstr "View Toolbar"

#: flatcamGUI/FlatCAMGUI.py:597
msgid "Shell Toolbar"
msgstr "Shell Toolbar"

#: flatcamGUI/FlatCAMGUI.py:601
msgid "Tools Toolbar"
msgstr "Tools Toolbar"

#: flatcamGUI/FlatCAMGUI.py:605
msgid "Excellon Editor Toolbar"
msgstr "Excellon Editor Toolbar"

#: flatcamGUI/FlatCAMGUI.py:611
msgid "Geometry Editor Toolbar"
msgstr "Geometry Editor Toolbar"

#: flatcamGUI/FlatCAMGUI.py:615
msgid "Gerber Editor Toolbar"
msgstr "Gerber Editor Toolbar"

#: flatcamGUI/FlatCAMGUI.py:619
msgid "Grid Toolbar"
msgstr "Grid Toolbar"

#: flatcamGUI/FlatCAMGUI.py:638 flatcamGUI/FlatCAMGUI.py:2070
msgid "Open project"
msgstr "Open project"

#: flatcamGUI/FlatCAMGUI.py:639 flatcamGUI/FlatCAMGUI.py:2071
msgid "Save project"
msgstr "Save project"

#: flatcamGUI/FlatCAMGUI.py:642 flatcamGUI/FlatCAMGUI.py:2074
msgid "New Blank Geometry"
msgstr "New Blank Geometry"

#: flatcamGUI/FlatCAMGUI.py:643
msgid "New Blank Gerber"
msgstr "New Blank Gerber"

#: flatcamGUI/FlatCAMGUI.py:644 flatcamGUI/FlatCAMGUI.py:2075
msgid "New Blank Excellon"
msgstr "New Blank Excellon"

#: flatcamGUI/FlatCAMGUI.py:648 flatcamGUI/FlatCAMGUI.py:2079
msgid "Save Object and close the Editor"
msgstr "Save Object and close the Editor"

#: flatcamGUI/FlatCAMGUI.py:652 flatcamGUI/FlatCAMGUI.py:2083
msgid "&Delete"
msgstr "&Delete"

#: flatcamGUI/FlatCAMGUI.py:655 flatcamGUI/FlatCAMGUI.py:2086
msgid "&Replot"
msgstr "&Replot"

#: flatcamGUI/FlatCAMGUI.py:656 flatcamGUI/FlatCAMGUI.py:2087
msgid "&Clear plot"
msgstr "&Clear plot"

#: flatcamGUI/FlatCAMGUI.py:657 flatcamGUI/FlatCAMGUI.py:1323
#: flatcamGUI/FlatCAMGUI.py:2088
msgid "Zoom In"
msgstr "Zoom In"

#: flatcamGUI/FlatCAMGUI.py:658 flatcamGUI/FlatCAMGUI.py:1323
#: flatcamGUI/FlatCAMGUI.py:2089
msgid "Zoom Out"
msgstr "Zoom Out"

#: flatcamGUI/FlatCAMGUI.py:659 flatcamGUI/FlatCAMGUI.py:1322
#: flatcamGUI/FlatCAMGUI.py:1727 flatcamGUI/FlatCAMGUI.py:2090
msgid "Zoom Fit"
msgstr "Zoom Fit"

#: flatcamGUI/FlatCAMGUI.py:664 flatcamGUI/FlatCAMGUI.py:2095
msgid "&Command Line"
msgstr "&Command Line"

#: flatcamGUI/FlatCAMGUI.py:670 flatcamGUI/FlatCAMGUI.py:2101
msgid "2Sided Tool"
msgstr "2Sided Tool"

#: flatcamGUI/FlatCAMGUI.py:671 flatcamGUI/FlatCAMGUI.py:2102
msgid "&Cutout Tool"
msgstr "&Cutout Tool"

#: flatcamGUI/FlatCAMGUI.py:672 flatcamGUI/FlatCAMGUI.py:2103
#: flatcamGUI/ObjectUI.py:456 flatcamTools/ToolNonCopperClear.py:535
msgid "NCC Tool"
msgstr "NCC Tool"

#: flatcamGUI/FlatCAMGUI.py:676 flatcamGUI/FlatCAMGUI.py:2107
msgid "Panel Tool"
msgstr "Panel Tool"

#: flatcamGUI/FlatCAMGUI.py:677 flatcamGUI/FlatCAMGUI.py:2108
#: flatcamTools/ToolFilm.py:209
msgid "Film Tool"
msgstr "Film Tool"

#: flatcamGUI/FlatCAMGUI.py:678 flatcamGUI/FlatCAMGUI.py:2110
#: flatcamTools/ToolSolderPaste.py:455
msgid "SolderPaste Tool"
msgstr "SolderPaste Tool"

#: flatcamGUI/FlatCAMGUI.py:679 flatcamGUI/FlatCAMGUI.py:2111
#: flatcamTools/ToolSub.py:28
msgid "Substract Tool"
msgstr "Substract Tool"

#: flatcamGUI/FlatCAMGUI.py:683 flatcamGUI/FlatCAMGUI.py:1328
#: flatcamGUI/FlatCAMGUI.py:2116
msgid "Calculators Tool"
msgstr "Calculators Tool"

#: flatcamGUI/FlatCAMGUI.py:687 flatcamGUI/FlatCAMGUI.py:704
#: flatcamGUI/FlatCAMGUI.py:738 flatcamGUI/FlatCAMGUI.py:2120
#: flatcamGUI/FlatCAMGUI.py:2173
msgid "Select"
msgstr "Select"

#: flatcamGUI/FlatCAMGUI.py:688 flatcamGUI/FlatCAMGUI.py:2121
msgid "Add Drill Hole"
msgstr "Add Drill Hole"

#: flatcamGUI/FlatCAMGUI.py:690 flatcamGUI/FlatCAMGUI.py:2123
msgid "Add Drill Hole Array"
msgstr "Add Drill Hole Array"

#: flatcamGUI/FlatCAMGUI.py:691 flatcamGUI/FlatCAMGUI.py:1582
#: flatcamGUI/FlatCAMGUI.py:1782 flatcamGUI/FlatCAMGUI.py:2125
msgid "Add Slot"
msgstr "Add Slot"

#: flatcamGUI/FlatCAMGUI.py:693 flatcamGUI/FlatCAMGUI.py:1581
#: flatcamGUI/FlatCAMGUI.py:1783 flatcamGUI/FlatCAMGUI.py:2127
msgid "Add Slot Array"
msgstr "Add Slot Array"

#: flatcamGUI/FlatCAMGUI.py:694 flatcamGUI/FlatCAMGUI.py:1785
#: flatcamGUI/FlatCAMGUI.py:2124
msgid "Resize Drill"
msgstr "Resize Drill"

#: flatcamGUI/FlatCAMGUI.py:697 flatcamGUI/FlatCAMGUI.py:2130
msgid "Copy Drill"
msgstr "Copy Drill"

#: flatcamGUI/FlatCAMGUI.py:698 flatcamGUI/FlatCAMGUI.py:2132
msgid "Delete Drill"
msgstr "Delete Drill"

#: flatcamGUI/FlatCAMGUI.py:701 flatcamGUI/FlatCAMGUI.py:2135
msgid "Move Drill"
msgstr "Move Drill"

#: flatcamGUI/FlatCAMGUI.py:705 flatcamGUI/FlatCAMGUI.py:2139
msgid "Add Circle"
msgstr "Add Circle"

#: flatcamGUI/FlatCAMGUI.py:706 flatcamGUI/FlatCAMGUI.py:2140
msgid "Add Arc"
msgstr "Add Arc"

#: flatcamGUI/FlatCAMGUI.py:708 flatcamGUI/FlatCAMGUI.py:2142
msgid "Add Rectangle"
msgstr "Add Rectangle"

#: flatcamGUI/FlatCAMGUI.py:711 flatcamGUI/FlatCAMGUI.py:2145
msgid "Add Path"
msgstr "Add Path"

#: flatcamGUI/FlatCAMGUI.py:712 flatcamGUI/FlatCAMGUI.py:2147
msgid "Add Polygon"
msgstr "Add Polygon"

#: flatcamGUI/FlatCAMGUI.py:714 flatcamGUI/FlatCAMGUI.py:2149
msgid "Add Text"
msgstr "Add Text"

#: flatcamGUI/FlatCAMGUI.py:715 flatcamGUI/FlatCAMGUI.py:2150
msgid "Add Buffer"
msgstr "Add Buffer"

#: flatcamGUI/FlatCAMGUI.py:716 flatcamGUI/FlatCAMGUI.py:2151
msgid "Paint Shape"
msgstr "Paint Shape"

#: flatcamGUI/FlatCAMGUI.py:717 flatcamGUI/FlatCAMGUI.py:755
#: flatcamGUI/FlatCAMGUI.py:1744 flatcamGUI/FlatCAMGUI.py:1772
#: flatcamGUI/FlatCAMGUI.py:2152 flatcamGUI/FlatCAMGUI.py:2189
msgid "Eraser"
msgstr "Eraser"

#: flatcamGUI/FlatCAMGUI.py:720 flatcamGUI/FlatCAMGUI.py:2155
msgid "Polygon Union"
msgstr "Polygon Union"

#: flatcamGUI/FlatCAMGUI.py:722 flatcamGUI/FlatCAMGUI.py:2157
msgid "Polygon Intersection"
msgstr "Polygon Intersection"

#: flatcamGUI/FlatCAMGUI.py:724 flatcamGUI/FlatCAMGUI.py:2159
msgid "Polygon Subtraction"
msgstr "Polygon Subtraction"

#: flatcamGUI/FlatCAMGUI.py:727 flatcamGUI/FlatCAMGUI.py:2162
msgid "Cut Path"
msgstr "Cut Path"

#: flatcamGUI/FlatCAMGUI.py:728
msgid "Copy Shape(s)"
msgstr "Copy Shape(s)"

#: flatcamGUI/FlatCAMGUI.py:731
msgid "Delete Shape '-'"
msgstr "Delete Shape '-'"

#: flatcamGUI/FlatCAMGUI.py:733 flatcamGUI/FlatCAMGUI.py:762
#: flatcamGUI/FlatCAMGUI.py:1751 flatcamGUI/FlatCAMGUI.py:1776
#: flatcamGUI/FlatCAMGUI.py:2167 flatcamGUI/FlatCAMGUI.py:2196
msgid "Transformations"
msgstr "Transformations"

#: flatcamGUI/FlatCAMGUI.py:735
msgid "Move Objects "
msgstr "Move Objects "

#: flatcamGUI/FlatCAMGUI.py:739 flatcamGUI/FlatCAMGUI.py:1692
#: flatcamGUI/FlatCAMGUI.py:2174
msgid "Add Pad"
msgstr "Add Pad"

#: flatcamGUI/FlatCAMGUI.py:741 flatcamGUI/FlatCAMGUI.py:1693
#: flatcamGUI/FlatCAMGUI.py:2176
msgid "Add Track"
msgstr "Add Track"

#: flatcamGUI/FlatCAMGUI.py:742 flatcamGUI/FlatCAMGUI.py:1692
#: flatcamGUI/FlatCAMGUI.py:2177
msgid "Add Region"
msgstr "Add Region"

#: flatcamGUI/FlatCAMGUI.py:744 flatcamGUI/FlatCAMGUI.py:1764
#: flatcamGUI/FlatCAMGUI.py:2179
msgid "Poligonize"
msgstr "Poligonize"

#: flatcamGUI/FlatCAMGUI.py:746 flatcamGUI/FlatCAMGUI.py:1765
#: flatcamGUI/FlatCAMGUI.py:2181
msgid "SemiDisc"
msgstr "SemiDisc"

#: flatcamGUI/FlatCAMGUI.py:747 flatcamGUI/FlatCAMGUI.py:1766
#: flatcamGUI/FlatCAMGUI.py:2182
msgid "Disc"
msgstr "Disc"

#: flatcamGUI/FlatCAMGUI.py:753 flatcamGUI/FlatCAMGUI.py:1771
#: flatcamGUI/FlatCAMGUI.py:2188
msgid "Mark Area"
msgstr "Mark Area"

#: flatcamGUI/FlatCAMGUI.py:764 flatcamGUI/FlatCAMGUI.py:1692
#: flatcamGUI/FlatCAMGUI.py:1754 flatcamGUI/FlatCAMGUI.py:1795
#: flatcamGUI/FlatCAMGUI.py:2198 flatcamTools/ToolMove.py:26
msgid "Move"
msgstr "Move"

#: flatcamGUI/FlatCAMGUI.py:770 flatcamGUI/FlatCAMGUI.py:2204
msgid "Snap to grid"
msgstr "Snap to grid"

#: flatcamGUI/FlatCAMGUI.py:773 flatcamGUI/FlatCAMGUI.py:2207
msgid "Grid X snapping distance"
msgstr "Grid X snapping distance"

#: flatcamGUI/FlatCAMGUI.py:778 flatcamGUI/FlatCAMGUI.py:2212
msgid "Grid Y snapping distance"
msgstr "Grid Y snapping distance"

#: flatcamGUI/FlatCAMGUI.py:784 flatcamGUI/FlatCAMGUI.py:2218
msgid ""
"When active, value on Grid_X\n"
"is copied to the Grid_Y value."
msgstr ""
"When active, value on Grid_X\n"
"is copied to the Grid_Y value."

#: flatcamGUI/FlatCAMGUI.py:790 flatcamGUI/FlatCAMGUI.py:2224
msgid "Snap to corner"
msgstr "Snap to corner"

#: flatcamGUI/FlatCAMGUI.py:794 flatcamGUI/FlatCAMGUI.py:2228
#: flatcamGUI/PreferencesUI.py:278
msgid "Max. magnet distance"
msgstr "Max. magnet distance"

#: flatcamGUI/FlatCAMGUI.py:821 flatcamGUI/FlatCAMGUI.py:1721
msgid "Project"
msgstr "Project"

#: flatcamGUI/FlatCAMGUI.py:831
msgid "Selected"
msgstr "Selected"

#: flatcamGUI/FlatCAMGUI.py:850 flatcamGUI/FlatCAMGUI.py:858
msgid "Plot Area"
msgstr "Plot Area"

#: flatcamGUI/FlatCAMGUI.py:884
msgid "General"
msgstr "General"

#: flatcamGUI/FlatCAMGUI.py:893
msgid "APP.  DEFAULTS"
msgstr "APP.  DEFAULTS"

#: flatcamGUI/FlatCAMGUI.py:894
msgid "PROJ. OPTIONS "
msgstr "PROJ. OPTIONS "

#: flatcamGUI/FlatCAMGUI.py:906 flatcamTools/ToolDblSided.py:47
msgid "GERBER"
msgstr "GERBER"

#: flatcamGUI/FlatCAMGUI.py:916 flatcamTools/ToolDblSided.py:71
msgid "EXCELLON"
msgstr "EXCELLON"

#: flatcamGUI/FlatCAMGUI.py:926 flatcamTools/ToolDblSided.py:95
msgid "GEOMETRY"
msgstr "GEOMETRY"

#: flatcamGUI/FlatCAMGUI.py:936
msgid "CNC-JOB"
msgstr "CNC-JOB"

#: flatcamGUI/FlatCAMGUI.py:945 flatcamGUI/ObjectUI.py:445
msgid "TOOLS"
msgstr "TOOLS"

#: flatcamGUI/FlatCAMGUI.py:955
msgid "UTILITIES"
msgstr "UTILITIES"

#: flatcamGUI/FlatCAMGUI.py:972
msgid "Import Preferences"
msgstr "Import Preferences"

#: flatcamGUI/FlatCAMGUI.py:975
msgid ""
"Import a full set of FlatCAM settings from a file\n"
"previously saved on HDD.\n"
"\n"
"FlatCAM automatically save a 'factory_defaults' file\n"
"on the first start. Do not delete that file."
msgstr ""
"Import a full set of FlatCAM settings from a file\n"
"previously saved on HDD.\n"
"\n"
"FlatCAM automatically save a 'factory_defaults' file\n"
"on the first start. Do not delete that file."

#: flatcamGUI/FlatCAMGUI.py:982
msgid "Export Preferences"
msgstr "Export Preferences"

#: flatcamGUI/FlatCAMGUI.py:985
msgid ""
"Export a full set of FlatCAM settings in a file\n"
"that is saved on HDD."
msgstr ""
"Export a full set of FlatCAM settings in a file\n"
"that is saved on HDD."

#: flatcamGUI/FlatCAMGUI.py:990
msgid "Open Pref Folder"
msgstr "Open Pref Folder"

#: flatcamGUI/FlatCAMGUI.py:993
msgid "Open the folder where FlatCAM save the preferences files."
msgstr "Open the folder where FlatCAM save the preferences files."

#: flatcamGUI/FlatCAMGUI.py:1004
msgid ""
"Save the current settings in the 'current_defaults' file\n"
"which is the file storing the working default preferences."
msgstr ""
"Save the current settings in the 'current_defaults' file\n"
"which is the file storing the working default preferences."

#: flatcamGUI/FlatCAMGUI.py:1317
msgid "SHOW SHORTCUT LIST"
msgstr "SHOW SHORTCUT LIST"

#: flatcamGUI/FlatCAMGUI.py:1317
msgid "Switch to Project Tab"
msgstr "Switch to Project Tab"

#: flatcamGUI/FlatCAMGUI.py:1317
msgid "Switch to Selected Tab"
msgstr "Switch to Selected Tab"

#: flatcamGUI/FlatCAMGUI.py:1318
msgid "Switch to Tool Tab"
msgstr "Switch to Tool Tab"

#: flatcamGUI/FlatCAMGUI.py:1319
msgid "New Gerber"
msgstr "New Gerber"

#: flatcamGUI/FlatCAMGUI.py:1319
msgid "Edit Object (if selected)"
msgstr "Edit Object (if selected)"

#: flatcamGUI/FlatCAMGUI.py:1319
msgid "Jump to Coordinates"
msgstr "Jump to Coordinates"

#: flatcamGUI/FlatCAMGUI.py:1320
msgid "New Excellon"
msgstr "New Excellon"

#: flatcamGUI/FlatCAMGUI.py:1320
msgid "Move Obj"
msgstr "Move Obj"

#: flatcamGUI/FlatCAMGUI.py:1320
msgid "New Geometry"
msgstr "New Geometry"

#: flatcamGUI/FlatCAMGUI.py:1320
msgid "Set Origin"
msgstr "Set Origin"

#: flatcamGUI/FlatCAMGUI.py:1320
msgid "Change Units"
msgstr "Change Units"

#: flatcamGUI/FlatCAMGUI.py:1321
msgid "Open Properties Tool"
msgstr "Open Properties Tool"

#: flatcamGUI/FlatCAMGUI.py:1321
msgid "Rotate by 90 degree CW"
msgstr "Rotate by 90 degree CW"

#: flatcamGUI/FlatCAMGUI.py:1321
msgid "Shell Toggle"
msgstr "Shell Toggle"

#: flatcamGUI/FlatCAMGUI.py:1322
msgid ""
"Add a Tool (when in Geometry Selected Tab or in Tools NCC or Tools Paint)"
msgstr ""
"Add a Tool (when in Geometry Selected Tab or in Tools NCC or Tools Paint)"

#: flatcamGUI/FlatCAMGUI.py:1323
msgid "Flip on X_axis"
msgstr "Flip on X_axis"

#: flatcamGUI/FlatCAMGUI.py:1323
msgid "Flip on Y_axis"
msgstr "Flip on Y_axis"

#: flatcamGUI/FlatCAMGUI.py:1323
msgid "Select All"
msgstr "Select All"

#: flatcamGUI/FlatCAMGUI.py:1323
msgid "Copy Obj"
msgstr "Copy Obj"

#: flatcamGUI/FlatCAMGUI.py:1324
msgid "Open Excellon File"
msgstr "Open Excellon File"

#: flatcamGUI/FlatCAMGUI.py:1324
msgid "Open Gerber File"
msgstr "Open Gerber File"

#: flatcamGUI/FlatCAMGUI.py:1324
msgid "New Project"
msgstr "New Project"

#: flatcamGUI/FlatCAMGUI.py:1324 flatcamGUI/FlatCAMGUI.py:1506
msgid "Measurement Tool"
msgstr "Measurement Tool"

#: flatcamGUI/FlatCAMGUI.py:1325
msgid "Save Project As"
msgstr "Save Project As"

#: flatcamGUI/FlatCAMGUI.py:1325
msgid "Toggle Plot Area"
msgstr "Toggle Plot Area"

#: flatcamGUI/FlatCAMGUI.py:1325
msgid "Copy Obj_Name"
msgstr "Copy Obj_Name"

#: flatcamGUI/FlatCAMGUI.py:1326
msgid "Toggle Code Editor"
msgstr "Toggle Code Editor"

#: flatcamGUI/FlatCAMGUI.py:1326
msgid "Toggle the axis"
msgstr "Toggle the axis"

#: flatcamGUI/FlatCAMGUI.py:1326
msgid "Open Preferences Window"
msgstr "Open Preferences Window"

#: flatcamGUI/FlatCAMGUI.py:1327
msgid "Rotate by 90 degree CCW"
msgstr "Rotate by 90 degree CCW"

#: flatcamGUI/FlatCAMGUI.py:1327
msgid "Run a Script"
msgstr "Run a Script"

#: flatcamGUI/FlatCAMGUI.py:1327
msgid "Toggle the workspace"
msgstr "Toggle the workspace"

#: flatcamGUI/FlatCAMGUI.py:1327
msgid "Skew on X axis"
msgstr "Skew on X axis"

#: flatcamGUI/FlatCAMGUI.py:1328
msgid "Skew on Y axis"
msgstr "Skew on Y axis"

#: flatcamGUI/FlatCAMGUI.py:1328
msgid "2-Sided PCB Tool"
msgstr "2-Sided PCB Tool"

#: flatcamGUI/FlatCAMGUI.py:1328
msgid "Solder Paste Dispensing Tool"
msgstr "Solder Paste Dispensing Tool"

#: flatcamGUI/FlatCAMGUI.py:1329
msgid "Film PCB Tool"
msgstr "Film PCB Tool"

#: flatcamGUI/FlatCAMGUI.py:1329
msgid "Non-Copper Clearing Tool"
msgstr "Non-Copper Clearing Tool"

#: flatcamGUI/FlatCAMGUI.py:1330
msgid "Paint Area Tool"
msgstr "Paint Area Tool"

#: flatcamGUI/FlatCAMGUI.py:1330 flatcamTools/ToolPDF.py:38
msgid "PDF Import Tool"
msgstr "PDF Import Tool"

#: flatcamGUI/FlatCAMGUI.py:1330
msgid "Transformations Tool"
msgstr "Transformations Tool"

#: flatcamGUI/FlatCAMGUI.py:1330
msgid "View File Source"
msgstr "View File Source"

#: flatcamGUI/FlatCAMGUI.py:1331
msgid "Cutout PCB Tool"
msgstr "Cutout PCB Tool"

#: flatcamGUI/FlatCAMGUI.py:1331
msgid "Enable all Plots"
msgstr "Enable all Plots"

#: flatcamGUI/FlatCAMGUI.py:1331
msgid "Disable all Plots"
msgstr "Disable all Plots"

#: flatcamGUI/FlatCAMGUI.py:1331
msgid "Disable Non-selected Plots"
msgstr "Disable Non-selected Plots"

#: flatcamGUI/FlatCAMGUI.py:1332
msgid "Toggle Full Screen"
msgstr "Toggle Full Screen"

#: flatcamGUI/FlatCAMGUI.py:1332
msgid "Abort current task (gracefully)"
msgstr "Abort current task (gracefully)"

#: flatcamGUI/FlatCAMGUI.py:1332
msgid "Open Online Manual"
msgstr "Open Online Manual"

#: flatcamGUI/FlatCAMGUI.py:1333
msgid "Open Online Tutorials"
msgstr "Open Online Tutorials"

#: flatcamGUI/FlatCAMGUI.py:1333
msgid "Refresh Plots"
msgstr "Refresh Plots"

#: flatcamGUI/FlatCAMGUI.py:1333 flatcamTools/ToolSolderPaste.py:412
msgid "Delete Object"
msgstr "Delete Object"

#: flatcamGUI/FlatCAMGUI.py:1333
msgid "Alternate: Delete Tool"
msgstr "Alternate: Delete Tool"

#: flatcamGUI/FlatCAMGUI.py:1334
msgid "(left to Key_1)Toogle Notebook Area (Left Side)"
msgstr "(left to Key_1)Toogle Notebook Area (Left Side)"

#: flatcamGUI/FlatCAMGUI.py:1334
msgid "En(Dis)able Obj Plot"
msgstr "En(Dis)able Obj Plot"

#: flatcamGUI/FlatCAMGUI.py:1335
msgid "Deselects all objects"
msgstr "Deselects all objects"

#: flatcamGUI/FlatCAMGUI.py:1349
msgid "Editor Shortcut list"
msgstr "Editor Shortcut list"

#: flatcamGUI/FlatCAMGUI.py:1499
msgid "GEOMETRY EDITOR"
msgstr "GEOMETRY EDITOR"

#: flatcamGUI/FlatCAMGUI.py:1499
msgid "Draw an Arc"
msgstr "Draw an Arc"

#: flatcamGUI/FlatCAMGUI.py:1499
msgid "Copy Geo Item"
msgstr "Copy Geo Item"

#: flatcamGUI/FlatCAMGUI.py:1500
msgid "Within Add Arc will toogle the ARC direction: CW or CCW"
msgstr "Within Add Arc will toogle the ARC direction: CW or CCW"

#: flatcamGUI/FlatCAMGUI.py:1500
msgid "Polygon Intersection Tool"
msgstr "Polygon Intersection Tool"

#: flatcamGUI/FlatCAMGUI.py:1501
msgid "Geo Paint Tool"
msgstr "Geo Paint Tool"

#: flatcamGUI/FlatCAMGUI.py:1501 flatcamGUI/FlatCAMGUI.py:1581
#: flatcamGUI/FlatCAMGUI.py:1692
msgid "Jump to Location (x, y)"
msgstr "Jump to Location (x, y)"

#: flatcamGUI/FlatCAMGUI.py:1501
msgid "Toggle Corner Snap"
msgstr "Toggle Corner Snap"

#: flatcamGUI/FlatCAMGUI.py:1501
msgid "Move Geo Item"
msgstr "Move Geo Item"

#: flatcamGUI/FlatCAMGUI.py:1502
msgid "Within Add Arc will cycle through the ARC modes"
msgstr "Within Add Arc will cycle through the ARC modes"

#: flatcamGUI/FlatCAMGUI.py:1502
msgid "Draw a Polygon"
msgstr "Draw a Polygon"

#: flatcamGUI/FlatCAMGUI.py:1502
msgid "Draw a Circle"
msgstr "Draw a Circle"

#: flatcamGUI/FlatCAMGUI.py:1503
msgid "Draw a Path"
msgstr "Draw a Path"

#: flatcamGUI/FlatCAMGUI.py:1503
msgid "Draw Rectangle"
msgstr "Draw Rectangle"

#: flatcamGUI/FlatCAMGUI.py:1503
msgid "Polygon Subtraction Tool"
msgstr "Polygon Subtraction Tool"

#: flatcamGUI/FlatCAMGUI.py:1503
msgid "Add Text Tool"
msgstr "Add Text Tool"

#: flatcamGUI/FlatCAMGUI.py:1504
msgid "Polygon Union Tool"
msgstr "Polygon Union Tool"

#: flatcamGUI/FlatCAMGUI.py:1504
msgid "Flip shape on X axis"
msgstr "Flip shape on X axis"

#: flatcamGUI/FlatCAMGUI.py:1504
msgid "Flip shape on Y axis"
msgstr "Flip shape on Y axis"

#: flatcamGUI/FlatCAMGUI.py:1504
msgid "Skew shape on X axis"
msgstr "Skew shape on X axis"

#: flatcamGUI/FlatCAMGUI.py:1505
msgid "Skew shape on Y axis"
msgstr "Skew shape on Y axis"

#: flatcamGUI/FlatCAMGUI.py:1505
msgid "Editor Transformation Tool"
msgstr "Editor Transformation Tool"

#: flatcamGUI/FlatCAMGUI.py:1505
msgid "Offset shape on X axis"
msgstr "Offset shape on X axis"

#: flatcamGUI/FlatCAMGUI.py:1506
msgid "Offset shape on Y axis"
msgstr "Offset shape on Y axis"

#: flatcamGUI/FlatCAMGUI.py:1506 flatcamGUI/FlatCAMGUI.py:1583
#: flatcamGUI/FlatCAMGUI.py:1696
msgid "Save Object and Exit Editor"
msgstr "Save Object and Exit Editor"

#: flatcamGUI/FlatCAMGUI.py:1506
msgid "Polygon Cut Tool"
msgstr "Polygon Cut Tool"

#: flatcamGUI/FlatCAMGUI.py:1507
msgid "Rotate Geometry"
msgstr "Rotate Geometry"

#: flatcamGUI/FlatCAMGUI.py:1507
msgid "Finish drawing for certain tools"
msgstr "Finish drawing for certain tools"

#: flatcamGUI/FlatCAMGUI.py:1507 flatcamGUI/FlatCAMGUI.py:1583
#: flatcamGUI/FlatCAMGUI.py:1695
msgid "Abort and return to Select"
msgstr "Abort and return to Select"

#: flatcamGUI/FlatCAMGUI.py:1508 flatcamGUI/FlatCAMGUI.py:2165
msgid "Delete Shape"
msgstr "Delete Shape"

#: flatcamGUI/FlatCAMGUI.py:1580
msgid "EXCELLON EDITOR"
msgstr "EXCELLON EDITOR"

#: flatcamGUI/FlatCAMGUI.py:1580
msgid "Copy Drill(s)"
msgstr "Copy Drill(s)"

#: flatcamGUI/FlatCAMGUI.py:1580 flatcamGUI/FlatCAMGUI.py:1779
msgid "Add Drill"
msgstr "Add Drill"

#: flatcamGUI/FlatCAMGUI.py:1581
msgid "Move Drill(s)"
msgstr "Move Drill(s)"

#: flatcamGUI/FlatCAMGUI.py:1582
msgid "Add a new Tool"
msgstr "Add a new Tool"

#: flatcamGUI/FlatCAMGUI.py:1582
msgid "Delete Drill(s)"
msgstr "Delete Drill(s)"

#: flatcamGUI/FlatCAMGUI.py:1582
msgid "Alternate: Delete Tool(s)"
msgstr "Alternate: Delete Tool(s)"

#: flatcamGUI/FlatCAMGUI.py:1691
msgid "GERBER EDITOR"
msgstr "GERBER EDITOR"

#: flatcamGUI/FlatCAMGUI.py:1691
msgid "Add Disc"
msgstr "Add Disc"

#: flatcamGUI/FlatCAMGUI.py:1691
msgid "Add SemiDisc"
msgstr "Add SemiDisc"

#: flatcamGUI/FlatCAMGUI.py:1693
msgid "Within Track & Region Tools will cycle in REVERSE the bend modes"
msgstr "Within Track & Region Tools will cycle in REVERSE the bend modes"

#: flatcamGUI/FlatCAMGUI.py:1694
msgid "Within Track & Region Tools will cycle FORWARD the bend modes"
msgstr "Within Track & Region Tools will cycle FORWARD the bend modes"

#: flatcamGUI/FlatCAMGUI.py:1695
msgid "Alternate: Delete Apertures"
msgstr "Alternate: Delete Apertures"

#: flatcamGUI/FlatCAMGUI.py:1695
msgid "Eraser Tool"
msgstr "Eraser Tool"

#: flatcamGUI/FlatCAMGUI.py:1696 flatcamGUI/PreferencesUI.py:1590
msgid "Mark Area Tool"
msgstr "Mark Area Tool"

#: flatcamGUI/FlatCAMGUI.py:1696
msgid "Poligonize Tool"
msgstr "Poligonize Tool"

#: flatcamGUI/FlatCAMGUI.py:1696
msgid "Transformation Tool"
msgstr "Transformation Tool"

#: flatcamGUI/FlatCAMGUI.py:1712
msgid "Toggle Visibility"
msgstr "Toggle Visibility"

#: flatcamGUI/FlatCAMGUI.py:1713
msgid "Toggle Panel"
msgstr "Toggle Panel"

#: flatcamGUI/FlatCAMGUI.py:1716
msgid "New"
msgstr "New"

#: flatcamGUI/FlatCAMGUI.py:1717
msgid "Geometry"
msgstr "Geometry"

#: flatcamGUI/FlatCAMGUI.py:1719
msgid "Excellon"
msgstr "Excellon"

#: flatcamGUI/FlatCAMGUI.py:1724
msgid "Grids"
msgstr "Grids"

#: flatcamGUI/FlatCAMGUI.py:1726
msgid "View"
msgstr "View"

#: flatcamGUI/FlatCAMGUI.py:1728
msgid "Clear Plot"
msgstr "Clear Plot"

#: flatcamGUI/FlatCAMGUI.py:1729
msgid "Replot"
msgstr "Replot"

#: flatcamGUI/FlatCAMGUI.py:1732
msgid "Geo Editor"
msgstr "Geo Editor"

#: flatcamGUI/FlatCAMGUI.py:1733
msgid "Path"
msgstr "Path"

#: flatcamGUI/FlatCAMGUI.py:1734
msgid "Rectangle"
msgstr "Rectangle"

#: flatcamGUI/FlatCAMGUI.py:1736
msgid "Circle"
msgstr "Circle"

#: flatcamGUI/FlatCAMGUI.py:1737
msgid "Polygon"
msgstr "Polygon"

#: flatcamGUI/FlatCAMGUI.py:1738
msgid "Arc"
msgstr "Arc"

#: flatcamGUI/FlatCAMGUI.py:1741
msgid "Text"
msgstr "Text"

#: flatcamGUI/FlatCAMGUI.py:1747
msgid "Union"
msgstr "Union"

#: flatcamGUI/FlatCAMGUI.py:1748
msgid "Intersection"
msgstr "Intersection"

#: flatcamGUI/FlatCAMGUI.py:1749
msgid "Substraction"
msgstr "Substraction"

#: flatcamGUI/FlatCAMGUI.py:1750 flatcamGUI/ObjectUI.py:1414
#: flatcamGUI/PreferencesUI.py:2981
msgid "Cut"
msgstr "Cut"

#: flatcamGUI/FlatCAMGUI.py:1757
msgid "Pad"
msgstr "Pad"

#: flatcamGUI/FlatCAMGUI.py:1758
msgid "Pad Array"
msgstr "Pad Array"

#: flatcamGUI/FlatCAMGUI.py:1761
msgid "Track"
msgstr "Track"

#: flatcamGUI/FlatCAMGUI.py:1762
msgid "Region"
msgstr "Region"

#: flatcamGUI/FlatCAMGUI.py:1778
msgid "Exc Editor"
msgstr "Exc Editor"

#: flatcamGUI/FlatCAMGUI.py:1828
msgid "Print Preview"
msgstr "Print Preview"

#: flatcamGUI/FlatCAMGUI.py:1829
msgid "Open a OS standard Preview Print window."
msgstr "Open a OS standard Preview Print window."

#: flatcamGUI/FlatCAMGUI.py:1830
msgid "Print Code"
msgstr "Print Code"

#: flatcamGUI/FlatCAMGUI.py:1831
msgid "Open a OS standard Print window."
msgstr "Open a OS standard Print window."

#: flatcamGUI/FlatCAMGUI.py:1833
msgid "Find in Code"
msgstr "Find in Code"

#: flatcamGUI/FlatCAMGUI.py:1834
msgid "Will search and highlight in yellow the string in the Find box."
msgstr "Will search and highlight in yellow the string in the Find box."

#: flatcamGUI/FlatCAMGUI.py:1840
msgid "Find box. Enter here the strings to be searched in the text."
msgstr "Find box. Enter here the strings to be searched in the text."

#: flatcamGUI/FlatCAMGUI.py:1842
msgid "Replace With"
msgstr "Replace With"

#: flatcamGUI/FlatCAMGUI.py:1843
msgid ""
"Will replace the string from the Find box with the one in the Replace box."
msgstr ""
"Will replace the string from the Find box with the one in the Replace box."

#: flatcamGUI/FlatCAMGUI.py:1847
msgid "String to replace the one in the Find box throughout the text."
msgstr "String to replace the one in the Find box throughout the text."

#: flatcamGUI/FlatCAMGUI.py:1849 flatcamGUI/ObjectUI.py:1412
#: flatcamGUI/PreferencesUI.py:2979 flatcamGUI/PreferencesUI.py:3804
msgid "All"
msgstr "All"

#: flatcamGUI/FlatCAMGUI.py:1850
msgid ""
"When checked it will replace all instances in the 'Find' box\n"
"with the text in the 'Replace' box.."
msgstr ""
"When checked it will replace all instances in the 'Find' box\n"
"with the text in the 'Replace' box.."

#: flatcamGUI/FlatCAMGUI.py:1853
msgid "Open Code"
msgstr "Open Code"

#: flatcamGUI/FlatCAMGUI.py:1854
msgid "Will open a text file in the editor."
msgstr "Will open a text file in the editor."

#: flatcamGUI/FlatCAMGUI.py:1856
msgid "Save Code"
msgstr "Save Code"

#: flatcamGUI/FlatCAMGUI.py:1857
msgid "Will save the text in the editor into a file."
msgstr "Will save the text in the editor into a file."

#: flatcamGUI/FlatCAMGUI.py:1859
msgid "Run Code"
msgstr "Run Code"

#: flatcamGUI/FlatCAMGUI.py:1860
msgid "Will run the TCL commands found in the text file, one by one."
msgstr "Will run the TCL commands found in the text file, one by one."

#: flatcamGUI/FlatCAMGUI.py:1898
msgid ""
"Relative neasurement.\n"
"Reference is last click position"
msgstr ""
"Relative neasurement.\n"
"Reference is last click position"

#: flatcamGUI/FlatCAMGUI.py:1904
msgid ""
"Absolute neasurement.\n"
"Reference is (X=0, Y= 0) position"
msgstr ""
"Absolute neasurement.\n"
"Reference is (X=0, Y= 0) position"

#: flatcamGUI/FlatCAMGUI.py:2030
msgid "Lock Toolbars"
msgstr "Lock Toolbars"

#: flatcamGUI/FlatCAMGUI.py:2138
msgid "Select 'Esc'"
msgstr "Select 'Esc'"

#: flatcamGUI/FlatCAMGUI.py:2163
msgid "Copy Objects"
msgstr "Copy Objects"

#: flatcamGUI/FlatCAMGUI.py:2170
msgid "Move Objects"
msgstr "Move Objects"

#: flatcamGUI/FlatCAMGUI.py:2610
msgid ""
"Please first select a geometry item to be cutted\n"
"then select the geometry item that will be cutted\n"
"out of the first item. In the end press ~X~ key or\n"
"the toolbar button."
msgstr ""
"Please first select a geometry item to be cutted\n"
"then select the geometry item that will be cutted\n"
"out of the first item. In the end press ~X~ key or\n"
"the toolbar button."

#: flatcamGUI/FlatCAMGUI.py:2617 flatcamGUI/FlatCAMGUI.py:2755
#: flatcamGUI/FlatCAMGUI.py:2814 flatcamGUI/FlatCAMGUI.py:2834
msgid "Warning"
msgstr "Warning"

#: flatcamGUI/FlatCAMGUI.py:2750
msgid ""
"Please select geometry items \n"
"on which to perform Intersection Tool."
msgstr ""
"Please select geometry items \n"
"on which to perform Intersection Tool."

#: flatcamGUI/FlatCAMGUI.py:2809
msgid ""
"Please select geometry items \n"
"on which to perform Substraction Tool."
msgstr ""
"Please select geometry items \n"
"on which to perform Substraction Tool."

#: flatcamGUI/FlatCAMGUI.py:2829
msgid ""
"Please select geometry items \n"
"on which to perform union."
msgstr ""
"Please select geometry items \n"
"on which to perform union."

#: flatcamGUI/FlatCAMGUI.py:2910 flatcamGUI/FlatCAMGUI.py:3125
msgid "Cancelled. Nothing selected to delete."
msgstr "Cancelled. Nothing selected to delete."

#: flatcamGUI/FlatCAMGUI.py:2995 flatcamGUI/FlatCAMGUI.py:3193
msgid "Cancelled. Nothing selected to copy."
msgstr "Cancelled. Nothing selected to copy."

#: flatcamGUI/FlatCAMGUI.py:3042 flatcamGUI/FlatCAMGUI.py:3240
msgid "Cancelled. Nothing selected to move."
msgstr "Cancelled. Nothing selected to move."

#: flatcamGUI/FlatCAMGUI.py:3266
msgid "New Tool ..."
msgstr "New Tool ..."

#: flatcamGUI/FlatCAMGUI.py:3267
msgid "Enter a Tool Diameter"
msgstr "Enter a Tool Diameter"

#: flatcamGUI/FlatCAMGUI.py:3283
msgid "Adding Tool cancelled ..."
msgstr "Adding Tool cancelled ..."

#: flatcamGUI/FlatCAMGUI.py:3326
msgid "Measurement Tool exit..."
msgstr "Measurement Tool exit..."

#: flatcamGUI/FlatCAMGUI.py:3463 flatcamGUI/FlatCAMGUI.py:3470
msgid "Idle."
msgstr "Idle."

#: flatcamGUI/FlatCAMGUI.py:3496
msgid "Application started ..."
msgstr "Application started ..."

#: flatcamGUI/FlatCAMGUI.py:3497
msgid "Hello!"
msgstr "Hello!"

#: flatcamGUI/FlatCAMGUI.py:3550
#| msgid "Open &Project ..."
msgid "Open Project ..."
msgstr "Open Project ..."

#: flatcamGUI/FlatCAMGUI.py:3575
msgid "Exit"
msgstr "Exit"

#: flatcamGUI/ObjectUI.py:33
msgid "FlatCAM Object"
msgstr "FlatCAM Object"

#: flatcamGUI/ObjectUI.py:58
msgid ""
"BASIC is suitable for a beginner. Many parameters\n"
"are hidden from the user in this mode.\n"
"ADVANCED mode will make available all parameters.\n"
"\n"
"To change the application LEVEL, go to:\n"
"Edit -> Preferences -> General and check:\n"
"'APP. LEVEL' radio button."
msgstr ""
"BASIC is suitable for a beginner. Many parameters\n"
"are hidden from the user in this mode.\n"
"ADVANCED mode will make available all parameters.\n"
"\n"
"To change the application LEVEL, go to:\n"
"Edit -> Preferences -> General and check:\n"
"'APP. LEVEL' radio button."

#: flatcamGUI/ObjectUI.py:81
msgid "Change the size of the object."
msgstr "Change the size of the object."

#: flatcamGUI/ObjectUI.py:89
msgid "Factor"
msgstr "Factor"

#: flatcamGUI/ObjectUI.py:91
msgid ""
"Factor by which to multiply\n"
"geometric features of this object."
msgstr ""
"Factor by which to multiply\n"
"geometric features of this object."

#: flatcamGUI/ObjectUI.py:102
msgid "Perform scaling operation."
msgstr "Perform scaling operation."

#: flatcamGUI/ObjectUI.py:110
msgid "Change the position of this object."
msgstr "Change the position of this object."

#: flatcamGUI/ObjectUI.py:117
msgid "Vector"
msgstr "Vector"

#: flatcamGUI/ObjectUI.py:119
msgid ""
"Amount by which to move the object\n"
"in the x and y axes in (x, y) format."
msgstr ""
"Amount by which to move the object\n"
"in the x and y axes in (x, y) format."

#: flatcamGUI/ObjectUI.py:129
msgid "Perform the offset operation."
msgstr "Perform the offset operation."

#: flatcamGUI/ObjectUI.py:143
msgid "Gerber Object"
msgstr "Gerber Object"

#: flatcamGUI/ObjectUI.py:150 flatcamGUI/ObjectUI.py:566
#: flatcamGUI/ObjectUI.py:899 flatcamGUI/ObjectUI.py:1398
#: flatcamGUI/PreferencesUI.py:1045 flatcamGUI/PreferencesUI.py:1625
#: flatcamGUI/PreferencesUI.py:2573 flatcamGUI/PreferencesUI.py:2955
msgid "Plot Options"
msgstr "Plot Options"

#: flatcamGUI/ObjectUI.py:156 flatcamGUI/ObjectUI.py:567
#: flatcamGUI/PreferencesUI.py:1052 flatcamGUI/PreferencesUI.py:1637
msgid "Solid"
msgstr "Solid"

#: flatcamGUI/ObjectUI.py:158 flatcamGUI/PreferencesUI.py:1054
msgid "Solid color polygons."
msgstr "Solid color polygons."

#: flatcamGUI/ObjectUI.py:164 flatcamGUI/PreferencesUI.py:1059
msgid "M-Color"
msgstr "M-Color"

#: flatcamGUI/ObjectUI.py:166 flatcamGUI/PreferencesUI.py:1061
msgid "Draw polygons in different colors."
msgstr "Draw polygons in different colors."

#: flatcamGUI/ObjectUI.py:172 flatcamGUI/ObjectUI.py:605
#: flatcamGUI/PreferencesUI.py:1066 flatcamGUI/PreferencesUI.py:1631
#: flatcamGUI/PreferencesUI.py:2577
msgid "Plot"
msgstr "Plot"

#: flatcamGUI/ObjectUI.py:174 flatcamGUI/ObjectUI.py:607
#: flatcamGUI/ObjectUI.py:945 flatcamGUI/ObjectUI.py:1508
#: flatcamGUI/PreferencesUI.py:1068 flatcamGUI/PreferencesUI.py:2579
#: flatcamGUI/PreferencesUI.py:2966
msgid "Plot (show) this object."
msgstr "Plot (show) this object."

#: flatcamGUI/ObjectUI.py:182 flatcamGUI/ObjectUI.py:578
#: flatcamGUI/ObjectUI.py:905 flatcamGUI/ObjectUI.py:1428
msgid "Name"
msgstr "Name"

#: flatcamGUI/ObjectUI.py:203
msgid ""
"Toggle the display of the Gerber Apertures Table.\n"
"When unchecked, it will delete all mark shapes\n"
"that are drawn on canvas."
msgstr ""
"Toggle the display of the Gerber Apertures Table.\n"
"When unchecked, it will delete all mark shapes\n"
"that are drawn on canvas."

#: flatcamGUI/ObjectUI.py:213
msgid "Mark All"
msgstr "Mark All"

#: flatcamGUI/ObjectUI.py:215
msgid ""
"When checked it will display all the apertures.\n"
"When unchecked, it will delete all mark shapes\n"
"that are drawn on canvas."
msgstr ""
"When checked it will display all the apertures.\n"
"When unchecked, it will delete all mark shapes\n"
"that are drawn on canvas."

#: flatcamGUI/ObjectUI.py:243
msgid "Mark the aperture instances on canvas."
msgstr "Mark the aperture instances on canvas."

#: flatcamGUI/ObjectUI.py:250 flatcamGUI/PreferencesUI.py:1093
msgid "Isolation Routing"
msgstr "Isolation Routing"

#: flatcamGUI/ObjectUI.py:252 flatcamGUI/PreferencesUI.py:1095
msgid ""
"Create a Geometry object with\n"
"toolpaths to cut outside polygons."
msgstr ""
"Create a Geometry object with\n"
"toolpaths to cut outside polygons."

#: flatcamGUI/ObjectUI.py:266
msgid ""
"Diameter of the cutting tool.\n"
"If you want to have an isolation path\n"
"inside the actual shape of the Gerber\n"
"feature, use a negative value for\n"
"this parameter."
msgstr ""
"Diameter of the cutting tool.\n"
"If you want to have an isolation path\n"
"inside the actual shape of the Gerber\n"
"feature, use a negative value for\n"
"this parameter."

#: flatcamGUI/ObjectUI.py:277 flatcamGUI/PreferencesUI.py:1113
msgid "# Passes"
msgstr "# Passes"

#: flatcamGUI/ObjectUI.py:279 flatcamGUI/PreferencesUI.py:1115
msgid ""
"Width of the isolation gap in\n"
"number (integer) of tool widths."
msgstr ""
"Width of the isolation gap in\n"
"number (integer) of tool widths."

#: flatcamGUI/ObjectUI.py:288 flatcamGUI/PreferencesUI.py:1124
msgid "Pass overlap"
msgstr "Pass overlap"

#: flatcamGUI/ObjectUI.py:290 flatcamGUI/PreferencesUI.py:1126
#, python-format
msgid ""
"How much (fraction) of the tool width to overlap each tool pass.\n"
"Example:\n"
"A value here of 0.25 means an overlap of 25%% from the tool diameter found "
"above."
msgstr ""
"How much (fraction) of the tool width to overlap each tool pass.\n"
"Example:\n"
"A value here of 0.25 means an overlap of 25%% from the tool diameter found "
"above."

#: flatcamGUI/ObjectUI.py:304 flatcamGUI/PreferencesUI.py:1139
#: flatcamGUI/PreferencesUI.py:3320 flatcamTools/ToolNonCopperClear.py:147
msgid "Milling Type"
msgstr "Milling Type"

#: flatcamGUI/ObjectUI.py:306 flatcamGUI/PreferencesUI.py:1141
msgid ""
"Milling type:\n"
"- climb / best for precision milling and to reduce tool usage\n"
"- conventional / useful when there is no backlash compensation"
msgstr ""
"Milling type:\n"
"- climb / best for precision milling and to reduce tool usage\n"
"- conventional / useful when there is no backlash compensation"

#: flatcamGUI/ObjectUI.py:310 flatcamGUI/PreferencesUI.py:1146
#: flatcamGUI/PreferencesUI.py:3327 flatcamTools/ToolNonCopperClear.py:154
msgid "Climb"
msgstr "Climb"

#: flatcamGUI/ObjectUI.py:311 flatcamGUI/PreferencesUI.py:1147
#: flatcamGUI/PreferencesUI.py:3328 flatcamTools/ToolNonCopperClear.py:155
msgid "Conv."
msgstr "Conv."

#: flatcamGUI/ObjectUI.py:316 flatcamGUI/PreferencesUI.py:1151
msgid "Combine Passes"
msgstr "Combine Passes"

#: flatcamGUI/ObjectUI.py:318 flatcamGUI/PreferencesUI.py:1153
msgid "Combine all passes into one object"
msgstr "Combine all passes into one object"

#: flatcamGUI/ObjectUI.py:322 flatcamGUI/PreferencesUI.py:1237
msgid "\"Follow\""
msgstr "\"Follow\""

#: flatcamGUI/ObjectUI.py:323 flatcamGUI/PreferencesUI.py:1239
msgid ""
"Generate a 'Follow' geometry.\n"
"This means that it will cut through\n"
"the middle of the trace."
msgstr ""
"Generate a 'Follow' geometry.\n"
"This means that it will cut through\n"
"the middle of the trace."

#: flatcamGUI/ObjectUI.py:328
msgid "Except"
msgstr "Except"

#: flatcamGUI/ObjectUI.py:329
msgid ""
"When the isolation geometry is generated,\n"
"by checking this, the area of the object bellow\n"
"will be subtracted from the isolation geometry."
msgstr ""
"When the isolation geometry is generated,\n"
"by checking this, the area of the object bellow\n"
"will be subtracted from the isolation geometry."

#: flatcamGUI/ObjectUI.py:354 flatcamTools/ToolCutOut.py:53
#: flatcamTools/ToolNonCopperClear.py:69 flatcamTools/ToolPaint.py:68
msgid "Obj Type"
msgstr "Obj Type"

#: flatcamGUI/ObjectUI.py:356
msgid ""
"Specify the type of object to be excepted from isolation.\n"
"It can be of type: Gerber or Geometry.\n"
"What is selected here will dictate the kind\n"
"of objects that will populate the 'Object' combobox."
msgstr ""
"Specify the type of object to be excepted from isolation.\n"
"It can be of type: Gerber or Geometry.\n"
"What is selected here will dictate the kind\n"
"of objects that will populate the 'Object' combobox."

#: flatcamGUI/ObjectUI.py:369 flatcamTools/ToolCutOut.py:69
#: flatcamTools/ToolNonCopperClear.py:87 flatcamTools/ToolPaint.py:86
#: flatcamTools/ToolPanelize.py:71 flatcamTools/ToolPanelize.py:84
msgid "Object"
msgstr "Object"

#: flatcamGUI/ObjectUI.py:370
msgid "Object whose area will be removed from isolation geometry."
msgstr "Object whose area will be removed from isolation geometry."

#: flatcamGUI/ObjectUI.py:374
msgid "Generate Isolation Geometry"
msgstr "Generate Isolation Geometry"

#: flatcamGUI/ObjectUI.py:376
msgid ""
"Create a Geometry object with toolpaths to cut \n"
"isolation outside, inside or on both sides of the\n"
"object. For a Gerber object outside means outside\n"
"of the Gerber feature and inside means inside of\n"
"the Gerber feature, if possible at all. This means\n"
"that only if the Gerber feature has openings inside, they\n"
"will be isolated. If what is wanted is to cut isolation\n"
"inside the actual Gerber feature, use a negative tool\n"
"diameter above."
msgstr ""
"Create a Geometry object with toolpaths to cut \n"
"isolation outside, inside or on both sides of the\n"
"object. For a Gerber object outside means outside\n"
"of the Gerber feature and inside means inside of\n"
"the Gerber feature, if possible at all. This means\n"
"that only if the Gerber feature has openings inside, they\n"
"will be isolated. If what is wanted is to cut isolation\n"
"inside the actual Gerber feature, use a negative tool\n"
"diameter above."

#: flatcamGUI/ObjectUI.py:388
msgid "Buffer Solid Geometry"
msgstr "Buffer Solid Geometry"

#: flatcamGUI/ObjectUI.py:390
msgid ""
"This button is shown only when the Gerber file\n"
"is loaded without buffering.\n"
"Clicking this will create the buffered geometry\n"
"required for isolation."
msgstr ""
"This button is shown only when the Gerber file\n"
"is loaded without buffering.\n"
"Clicking this will create the buffered geometry\n"
"required for isolation."

#: flatcamGUI/ObjectUI.py:397
msgid "FULL Geo"
msgstr "FULL Geo"

#: flatcamGUI/ObjectUI.py:399
msgid ""
"Create the Geometry Object\n"
"for isolation routing. It contains both\n"
"the interiors and exteriors geometry."
msgstr ""
"Create the Geometry Object\n"
"for isolation routing. It contains both\n"
"the interiors and exteriors geometry."

#: flatcamGUI/ObjectUI.py:408
msgid "Ext Geo"
msgstr "Ext Geo"

#: flatcamGUI/ObjectUI.py:410
msgid ""
"Create the Geometry Object\n"
"for isolation routing containing\n"
"only the exteriors geometry."
msgstr ""
"Create the Geometry Object\n"
"for isolation routing containing\n"
"only the exteriors geometry."

#: flatcamGUI/ObjectUI.py:417
msgid "Int Geo"
msgstr "Int Geo"

#: flatcamGUI/ObjectUI.py:419
msgid ""
"Create the Geometry Object\n"
"for isolation routing containing\n"
"only the interiors geometry."
msgstr ""
"Create the Geometry Object\n"
"for isolation routing containing\n"
"only the interiors geometry."

#: flatcamGUI/ObjectUI.py:449
msgid "Clear N-copper"
msgstr "Clear N-copper"

#: flatcamGUI/ObjectUI.py:451 flatcamGUI/PreferencesUI.py:3265
msgid ""
"Create a Geometry object with\n"
"toolpaths to cut all non-copper regions."
msgstr ""
"Create a Geometry object with\n"
"toolpaths to cut all non-copper regions."

#: flatcamGUI/ObjectUI.py:458 flatcamTools/ToolNonCopperClear.py:446
msgid ""
"Create the Geometry Object\n"
"for non-copper routing."
msgstr ""
"Create the Geometry Object\n"
"for non-copper routing."

#: flatcamGUI/ObjectUI.py:465
msgid "Board cutout"
msgstr "Board cutout"

#: flatcamGUI/ObjectUI.py:467 flatcamGUI/PreferencesUI.py:3524
msgid ""
"Create toolpaths to cut around\n"
"the PCB and separate it from\n"
"the original board."
msgstr ""
"Create toolpaths to cut around\n"
"the PCB and separate it from\n"
"the original board."

#: flatcamGUI/ObjectUI.py:472 flatcamTools/ToolCutOut.py:343
msgid "Cutout Tool"
msgstr "Cutout Tool"

#: flatcamGUI/ObjectUI.py:474
msgid ""
"Generate the geometry for\n"
"the board cutout."
msgstr ""
"Generate the geometry for\n"
"the board cutout."

#: flatcamGUI/ObjectUI.py:481 flatcamGUI/PreferencesUI.py:1158
msgid "Non-copper regions"
msgstr "Non-copper regions"

#: flatcamGUI/ObjectUI.py:483 flatcamGUI/PreferencesUI.py:1160
msgid ""
"Create polygons covering the\n"
"areas without copper on the PCB.\n"
"Equivalent to the inverse of this\n"
"object. Can be used to remove all\n"
"copper from a specified region."
msgstr ""
"Create polygons covering the\n"
"areas without copper on the PCB.\n"
"Equivalent to the inverse of this\n"
"object. Can be used to remove all\n"
"copper from a specified region."

#: flatcamGUI/ObjectUI.py:493 flatcamGUI/ObjectUI.py:525
#: flatcamGUI/PreferencesUI.py:1172 flatcamGUI/PreferencesUI.py:1197
msgid "Boundary Margin"
msgstr "Boundary Margin"

#: flatcamGUI/ObjectUI.py:495 flatcamGUI/PreferencesUI.py:1174
msgid ""
"Specify the edge of the PCB\n"
"by drawing a box around all\n"
"objects with this minimum\n"
"distance."
msgstr ""
"Specify the edge of the PCB\n"
"by drawing a box around all\n"
"objects with this minimum\n"
"distance."

#: flatcamGUI/ObjectUI.py:506 flatcamGUI/ObjectUI.py:535
#: flatcamGUI/PreferencesUI.py:1184 flatcamGUI/PreferencesUI.py:1206
msgid "Rounded Geo"
msgstr "Rounded Geo"

#: flatcamGUI/ObjectUI.py:508 flatcamGUI/PreferencesUI.py:1186
msgid "Resulting geometry will have rounded corners."
msgstr "Resulting geometry will have rounded corners."

#: flatcamGUI/ObjectUI.py:512 flatcamGUI/ObjectUI.py:544
#: flatcamTools/ToolCutOut.py:183 flatcamTools/ToolCutOut.py:203
#: flatcamTools/ToolCutOut.py:254 flatcamTools/ToolSolderPaste.py:127
msgid "Generate Geo"
msgstr "Generate Geo"

#: flatcamGUI/ObjectUI.py:517 flatcamGUI/PreferencesUI.py:1191
#: flatcamTools/ToolPanelize.py:85
msgid "Bounding Box"
msgstr "Bounding Box"

#: flatcamGUI/ObjectUI.py:519
msgid ""
"Create a geometry surrounding the Gerber object.\n"
"Square shape."
msgstr ""
"Create a geometry surrounding the Gerber object.\n"
"Square shape."

#: flatcamGUI/ObjectUI.py:527 flatcamGUI/PreferencesUI.py:1199
msgid ""
"Distance of the edges of the box\n"
"to the nearest polygon."
msgstr ""
"Distance of the edges of the box\n"
"to the nearest polygon."

#: flatcamGUI/ObjectUI.py:537 flatcamGUI/PreferencesUI.py:1208
msgid ""
"If the bounding box is \n"
"to have rounded corners\n"
"their radius is equal to\n"
"the margin."
msgstr ""
"If the bounding box is \n"
"to have rounded corners\n"
"their radius is equal to\n"
"the margin."

#: flatcamGUI/ObjectUI.py:546
msgid "Generate the Geometry object."
msgstr "Generate the Geometry object."

#: flatcamGUI/ObjectUI.py:558
msgid "Excellon Object"
msgstr "Excellon Object"

#: flatcamGUI/ObjectUI.py:569
msgid "Solid circles."
msgstr "Solid circles."

#: flatcamGUI/ObjectUI.py:617
msgid "Drills"
msgstr "Drills"

#: flatcamGUI/ObjectUI.py:617 flatcamGUI/PreferencesUI.py:2433
msgid "Slots"
msgstr "Slots"

#: flatcamGUI/ObjectUI.py:618 flatcamGUI/PreferencesUI.py:2061
msgid "Offset Z"
msgstr "Offset Z"

#: flatcamGUI/ObjectUI.py:622
msgid ""
"This is the Tool Number.\n"
"When ToolChange is checked, on toolchange event this value\n"
"will be showed as a T1, T2 ... Tn in the Machine Code.\n"
"\n"
"Here the tools are selected for G-code generation."
msgstr ""
"This is the Tool Number.\n"
"When ToolChange is checked, on toolchange event this value\n"
"will be showed as a T1, T2 ... Tn in the Machine Code.\n"
"\n"
"Here the tools are selected for G-code generation."

#: flatcamGUI/ObjectUI.py:627 flatcamGUI/ObjectUI.py:970
#: flatcamTools/ToolPaint.py:120
msgid ""
"Tool Diameter. It's value (in current FlatCAM units) \n"
"is the cut width into the material."
msgstr ""
"Tool Diameter. It's value (in current FlatCAM units) \n"
"is the cut width into the material."

#: flatcamGUI/ObjectUI.py:630
msgid ""
"The number of Drill holes. Holes that are drilled with\n"
"a drill bit."
msgstr ""
"The number of Drill holes. Holes that are drilled with\n"
"a drill bit."

#: flatcamGUI/ObjectUI.py:633
msgid ""
"The number of Slot holes. Holes that are created by\n"
"milling them with an endmill bit."
msgstr ""
"The number of Slot holes. Holes that are created by\n"
"milling them with an endmill bit."

#: flatcamGUI/ObjectUI.py:636 flatcamGUI/PreferencesUI.py:2063
msgid ""
"Some drill bits (the larger ones) need to drill deeper\n"
"to create the desired exit hole diameter due of the tip shape.\n"
"The value here can compensate the Cut Z parameter."
msgstr ""
"Some drill bits (the larger ones) need to drill deeper\n"
"to create the desired exit hole diameter due of the tip shape.\n"
"The value here can compensate the Cut Z parameter."

#: flatcamGUI/ObjectUI.py:640
msgid ""
"Toggle display of the drills for the current tool.\n"
"This does not select the tools for G-code generation."
msgstr ""
"Toggle display of the drills for the current tool.\n"
"This does not select the tools for G-code generation."

#: flatcamGUI/ObjectUI.py:647 flatcamGUI/PreferencesUI.py:1873
#: flatcamGUI/PreferencesUI.py:2622
msgid "Create CNC Job"
msgstr "Create CNC Job"

#: flatcamGUI/ObjectUI.py:649
msgid ""
"Create a CNC Job object\n"
"for this drill object."
msgstr ""
"Create a CNC Job object\n"
"for this drill object."

#: flatcamGUI/ObjectUI.py:658 flatcamGUI/ObjectUI.py:1137
#: flatcamGUI/PreferencesUI.py:1884 flatcamGUI/PreferencesUI.py:2634
#: flatcamGUI/PreferencesUI.py:3360 flatcamGUI/PreferencesUI.py:4048
#: flatcamTools/ToolCalculators.py:107 flatcamTools/ToolNonCopperClear.py:269
msgid "Cut Z"
msgstr "Cut Z"

#: flatcamGUI/ObjectUI.py:660 flatcamGUI/PreferencesUI.py:1886
msgid ""
"Drill depth (negative)\n"
"below the copper surface."
msgstr ""
"Drill depth (negative)\n"
"below the copper surface."

#: flatcamGUI/ObjectUI.py:668 flatcamGUI/ObjectUI.py:1171
#: flatcamGUI/PreferencesUI.py:1894 flatcamGUI/PreferencesUI.py:2672
msgid "Travel Z"
msgstr "Travel Z"

#: flatcamGUI/ObjectUI.py:670 flatcamGUI/PreferencesUI.py:1896
msgid ""
"Tool height when travelling\n"
"across the XY plane."
msgstr ""
"Tool height when travelling\n"
"across the XY plane."

#: flatcamGUI/ObjectUI.py:678 flatcamGUI/ObjectUI.py:1189
#: flatcamGUI/PreferencesUI.py:1904 flatcamGUI/PreferencesUI.py:2682
msgid "Tool change"
msgstr "Tool change"

#: flatcamGUI/ObjectUI.py:680 flatcamGUI/PreferencesUI.py:1906
msgid ""
"Include tool-change sequence\n"
"in G-Code (Pause for tool change)."
msgstr ""
"Include tool-change sequence\n"
"in G-Code (Pause for tool change)."

#: flatcamGUI/ObjectUI.py:686 flatcamGUI/ObjectUI.py:1182
msgid "Tool change Z"
msgstr "Tool change Z"

#: flatcamGUI/ObjectUI.py:688 flatcamGUI/ObjectUI.py:1185
#: flatcamGUI/PreferencesUI.py:1915 flatcamGUI/PreferencesUI.py:2697
msgid ""
"Z-axis position (height) for\n"
"tool change."
msgstr ""
"Z-axis position (height) for\n"
"tool change."

#: flatcamGUI/ObjectUI.py:697 flatcamGUI/PreferencesUI.py:2078
#: flatcamGUI/PreferencesUI.py:2811
msgid "Start move Z"
msgstr "Start move Z"

#: flatcamGUI/ObjectUI.py:699 flatcamGUI/PreferencesUI.py:2080
msgid ""
"Height of the tool just after start.\n"
"Delete the value if you don't need this feature."
msgstr ""
"Height of the tool just after start.\n"
"Delete the value if you don't need this feature."

#: flatcamGUI/ObjectUI.py:707 flatcamGUI/ObjectUI.py:1215
#: flatcamGUI/PreferencesUI.py:1923 flatcamGUI/PreferencesUI.py:2706
msgid "End move Z"
msgstr "End move Z"

#: flatcamGUI/ObjectUI.py:709 flatcamGUI/ObjectUI.py:1217
#: flatcamGUI/PreferencesUI.py:1925 flatcamGUI/PreferencesUI.py:2708
msgid ""
"Height of the tool after\n"
"the last move at the end of the job."
msgstr ""
"Height of the tool after\n"
"the last move at the end of the job."

#: flatcamGUI/ObjectUI.py:717 flatcamGUI/PreferencesUI.py:1933
#: flatcamGUI/PreferencesUI.py:4339 flatcamTools/ToolSolderPaste.py:224
msgid "Feedrate Z"
msgstr "Feedrate Z"

#: flatcamGUI/ObjectUI.py:719 flatcamGUI/PreferencesUI.py:1935
#| msgid ""
#| "Tool speed while drilling\n"
#| "(in units per minute).\n"
#| "This is for linear move G01."
msgid ""
"Tool speed while drilling\n"
"(in units per minute).\n"
"So called 'Plunge' feedrate.\n"
"This is for linear move G01."
msgstr ""
"Tool speed while drilling\n"
"(in units per minute).\n"
"So called 'Plunge' feedrate.\n"
"This is for linear move G01."

#: flatcamGUI/ObjectUI.py:729 flatcamGUI/PreferencesUI.py:2088
msgid "Feedrate Rapids"
msgstr "Feedrate Rapids"

#: flatcamGUI/ObjectUI.py:731 flatcamGUI/PreferencesUI.py:2090
msgid ""
"Tool speed while drilling\n"
"(in units per minute).\n"
"This is for the rapid move G00.\n"
"It is useful only for Marlin,\n"
"ignore for any other cases."
msgstr ""
"Tool speed while drilling\n"
"(in units per minute).\n"
"This is for the rapid move G00.\n"
"It is useful only for Marlin,\n"
"ignore for any other cases."

#: flatcamGUI/ObjectUI.py:745 flatcamGUI/ObjectUI.py:1272
#: flatcamGUI/PreferencesUI.py:2737
msgid "Spindle speed"
msgstr "Spindle speed"

#: flatcamGUI/ObjectUI.py:747 flatcamGUI/PreferencesUI.py:1947
msgid ""
"Speed of the spindle\n"
"in RPM (optional)"
msgstr ""
"Speed of the spindle\n"
"in RPM (optional)"

#: flatcamGUI/ObjectUI.py:755 flatcamGUI/ObjectUI.py:1285
#: flatcamGUI/PreferencesUI.py:1955 flatcamGUI/PreferencesUI.py:2750
msgid "Dwell"
msgstr "Dwell"

#: flatcamGUI/ObjectUI.py:757 flatcamGUI/ObjectUI.py:1288
#: flatcamGUI/PreferencesUI.py:1957 flatcamGUI/PreferencesUI.py:2752
msgid ""
"Pause to allow the spindle to reach its\n"
"speed before cutting."
msgstr ""
"Pause to allow the spindle to reach its\n"
"speed before cutting."

#: flatcamGUI/ObjectUI.py:762 flatcamGUI/ObjectUI.py:1294
#: flatcamGUI/PreferencesUI.py:1962 flatcamGUI/PreferencesUI.py:2757
msgid "Number of time units for spindle to dwell."
msgstr "Number of time units for spindle to dwell."

#: flatcamGUI/ObjectUI.py:770 flatcamGUI/PreferencesUI.py:1975
#: flatcamGUI/PreferencesUI.py:2767
msgid "Postprocessor"
msgstr "Postprocessor"

#: flatcamGUI/ObjectUI.py:772 flatcamGUI/PreferencesUI.py:1977
msgid ""
"The postprocessor JSON file that dictates\n"
"Gcode output."
msgstr ""
"The postprocessor JSON file that dictates\n"
"Gcode output."

#: flatcamGUI/ObjectUI.py:781 flatcamGUI/ObjectUI.py:1313
#: flatcamGUI/PreferencesUI.py:2101 flatcamGUI/PreferencesUI.py:2844
msgid "Probe Z depth"
msgstr "Probe Z depth"

#: flatcamGUI/ObjectUI.py:783 flatcamGUI/ObjectUI.py:1315
#: flatcamGUI/PreferencesUI.py:2103 flatcamGUI/PreferencesUI.py:2846
msgid ""
"The maximum depth that the probe is allowed\n"
"to probe. Negative value, in current units."
msgstr ""
"The maximum depth that the probe is allowed\n"
"to probe. Negative value, in current units."

#: flatcamGUI/ObjectUI.py:793 flatcamGUI/ObjectUI.py:1325
#: flatcamGUI/PreferencesUI.py:2111 flatcamGUI/PreferencesUI.py:2854
msgid "Feedrate Probe"
msgstr "Feedrate Probe"

#: flatcamGUI/ObjectUI.py:795 flatcamGUI/ObjectUI.py:1327
#: flatcamGUI/PreferencesUI.py:2113 flatcamGUI/PreferencesUI.py:2856
msgid "The feedrate used while the probe is probing."
msgstr "The feedrate used while the probe is probing."

#: flatcamGUI/ObjectUI.py:804
msgid ""
"Select from the Tools Table above\n"
"the hole dias that are to be drilled.\n"
"Use the # column to make the selection."
msgstr ""
"Select from the Tools Table above\n"
"the hole dias that are to be drilled.\n"
"Use the # column to make the selection."

#: flatcamGUI/ObjectUI.py:812 flatcamGUI/PreferencesUI.py:1986
msgid "Gcode"
msgstr "Gcode"

#: flatcamGUI/ObjectUI.py:814
msgid ""
"Choose what to use for GCode generation:\n"
"'Drills', 'Slots' or 'Both'.\n"
"When choosing 'Slots' or 'Both', slots will be\n"
"converted to a series of drills."
msgstr ""
"Choose what to use for GCode generation:\n"
"'Drills', 'Slots' or 'Both'.\n"
"When choosing 'Slots' or 'Both', slots will be\n"
"converted to a series of drills."

#: flatcamGUI/ObjectUI.py:829
msgid "Create Drills GCode"
msgstr "Create Drills GCode"

#: flatcamGUI/ObjectUI.py:831
msgid "Generate the CNC Job."
msgstr "Generate the CNC Job."

#: flatcamGUI/ObjectUI.py:836 flatcamGUI/PreferencesUI.py:2004
msgid "Mill Holes"
msgstr "Mill Holes"

#: flatcamGUI/ObjectUI.py:838 flatcamGUI/PreferencesUI.py:2006
msgid "Create Geometry for milling holes."
msgstr "Create Geometry for milling holes."

#: flatcamGUI/ObjectUI.py:843
msgid ""
"Select from the Tools Table above\n"
"the hole dias that are to be milled.\n"
"Use the # column to make the selection."
msgstr ""
"Select from the Tools Table above\n"
"the hole dias that are to be milled.\n"
"Use the # column to make the selection."

#: flatcamGUI/ObjectUI.py:851 flatcamGUI/PreferencesUI.py:2010
msgid "Drill Tool dia"
msgstr "Drill Tool dia"

#: flatcamGUI/ObjectUI.py:853 flatcamGUI/PreferencesUI.py:1106
#: flatcamGUI/PreferencesUI.py:2012
msgid "Diameter of the cutting tool."
msgstr "Diameter of the cutting tool."

#: flatcamGUI/ObjectUI.py:858
msgid "Mill Drills Geo"
msgstr "Mill Drills Geo"

#: flatcamGUI/ObjectUI.py:860
msgid ""
"Create the Geometry Object\n"
"for milling DRILLS toolpaths."
msgstr ""
"Create the Geometry Object\n"
"for milling DRILLS toolpaths."

#: flatcamGUI/ObjectUI.py:867 flatcamGUI/PreferencesUI.py:2017
msgid "Slot Tool dia"
msgstr "Slot Tool dia"

#: flatcamGUI/ObjectUI.py:869 flatcamGUI/PreferencesUI.py:2019
msgid ""
"Diameter of the cutting tool\n"
"when milling slots."
msgstr ""
"Diameter of the cutting tool\n"
"when milling slots."

#: flatcamGUI/ObjectUI.py:875
msgid "Mill Slots Geo"
msgstr "Mill Slots Geo"

#: flatcamGUI/ObjectUI.py:877
msgid ""
"Create the Geometry Object\n"
"for milling SLOTS toolpaths."
msgstr ""
"Create the Geometry Object\n"
"for milling SLOTS toolpaths."

#: flatcamGUI/ObjectUI.py:926
msgid ""
"Tools in this Geometry object used for cutting.\n"
"The 'Offset' entry will set an offset for the cut.\n"
"'Offset' can be inside, outside, on path (none) and custom.\n"
"'Type' entry is only informative and it allow to know the \n"
"intent of using the current tool. \n"
"It can be Rough(ing), Finish(ing) or Iso(lation).\n"
"The 'Tool type'(TT) can be circular with 1 to 4 teeths(C1..C4),\n"
"ball(B), or V-Shaped(V). \n"
"When V-shaped is selected the 'Type' entry is automatically \n"
"set to Isolation, the CutZ parameter in the UI form is\n"
"grayed out and Cut Z is automatically calculated from the newly \n"
"showed UI form entries named V-Tip Dia and V-Tip Angle."
msgstr ""
"Tools in this Geometry object used for cutting.\n"
"The 'Offset' entry will set an offset for the cut.\n"
"'Offset' can be inside, outside, on path (none) and custom.\n"
"'Type' entry is only informative and it allow to know the \n"
"intent of using the current tool. \n"
"It can be Rough(ing), Finish(ing) or Iso(lation).\n"
"The 'Tool type'(TT) can be circular with 1 to 4 teeths(C1..C4),\n"
"ball(B), or V-Shaped(V). \n"
"When V-shaped is selected the 'Type' entry is automatically \n"
"set to Isolation, the CutZ parameter in the UI form is\n"
"grayed out and Cut Z is automatically calculated from the newly \n"
"showed UI form entries named V-Tip Dia and V-Tip Angle."

#: flatcamGUI/ObjectUI.py:943 flatcamGUI/ObjectUI.py:1506
#: flatcamGUI/PreferencesUI.py:2965
msgid "Plot Object"
msgstr "Plot Object"

#: flatcamGUI/ObjectUI.py:957 flatcamGUI/ObjectUI.py:1522
msgid "Dia"
msgstr "Dia"

#: flatcamGUI/ObjectUI.py:957 flatcamGUI/ObjectUI.py:1522
#: flatcamTools/ToolNonCopperClear.py:107 flatcamTools/ToolPaint.py:106
msgid "TT"
msgstr "TT"

#: flatcamGUI/ObjectUI.py:964
msgid ""
"This is the Tool Number.\n"
"When ToolChange is checked, on toolchange event this value\n"
"will be showed as a T1, T2 ... Tn"
msgstr ""
"This is the Tool Number.\n"
"When ToolChange is checked, on toolchange event this value\n"
"will be showed as a T1, T2 ... Tn"

#: flatcamGUI/ObjectUI.py:975
msgid ""
"The value for the Offset can be:\n"
"- Path -> There is no offset, the tool cut will be done through the geometry "
"line.\n"
"- In(side) -> The tool cut will follow the geometry inside. It will create a "
"'pocket'.\n"
"- Out(side) -> The tool cut will follow the geometry line on the outside."
msgstr ""
"The value for the Offset can be:\n"
"- Path -> There is no offset, the tool cut will be done through the geometry "
"line.\n"
"- In(side) -> The tool cut will follow the geometry inside. It will create a "
"'pocket'.\n"
"- Out(side) -> The tool cut will follow the geometry line on the outside."

#: flatcamGUI/ObjectUI.py:982
msgid ""
"The (Operation) Type has only informative value. Usually the UI form "
"values \n"
"are choose based on the operation type and this will serve as a reminder.\n"
"Can be 'Roughing', 'Finishing' or 'Isolation'.\n"
"For Roughing we may choose a lower Feedrate and multiDepth cut.\n"
"For Finishing we may choose a higher Feedrate, without multiDepth.\n"
"For Isolation we need a lower Feedrate as it use a milling bit with a fine "
"tip."
msgstr ""
"The (Operation) Type has only informative value. Usually the UI form "
"values \n"
"are choose based on the operation type and this will serve as a reminder.\n"
"Can be 'Roughing', 'Finishing' or 'Isolation'.\n"
"For Roughing we may choose a lower Feedrate and multiDepth cut.\n"
"For Finishing we may choose a higher Feedrate, without multiDepth.\n"
"For Isolation we need a lower Feedrate as it use a milling bit with a fine "
"tip."

#: flatcamGUI/ObjectUI.py:991
msgid ""
"The Tool Type (TT) can be:\n"
"- Circular with 1 ... 4 teeth -> it is informative only. Being circular the "
"cut width in material\n"
"is exactly the tool diameter.\n"
"- Ball -> informative only and make reference to the Ball type endmill.\n"
"- V-Shape -> it will disable de Z-Cut parameter in the UI form and enable "
"two additional UI form\n"
"fields: V-Tip Dia and V-Tip Angle. Adjusting those two values will adjust "
"the Z-Cut parameter such\n"
"as the cut width into material will be equal with the value in the Tool "
"Diameter column of this table.\n"
"Choosing the V-Shape Tool Type automatically will select the Operation Type "
"as Isolation."
msgstr ""
"The Tool Type (TT) can be:\n"
"- Circular with 1 ... 4 teeth -> it is informative only. Being circular the "
"cut width in material\n"
"is exactly the tool diameter.\n"
"- Ball -> informative only and make reference to the Ball type endmill.\n"
"- V-Shape -> it will disable de Z-Cut parameter in the UI form and enable "
"two additional UI form\n"
"fields: V-Tip Dia and V-Tip Angle. Adjusting those two values will adjust "
"the Z-Cut parameter such\n"
"as the cut width into material will be equal with the value in the Tool "
"Diameter column of this table.\n"
"Choosing the V-Shape Tool Type automatically will select the Operation Type "
"as Isolation."

#: flatcamGUI/ObjectUI.py:1003
msgid ""
"Plot column. It is visible only for MultiGeo geometries, meaning geometries "
"that holds the geometry\n"
"data into the tools. For those geometries, deleting the tool will delete the "
"geometry data also,\n"
"so be WARNED. From the checkboxes on each row it can be enabled/disabled the "
"plot on canvas\n"
"for the corresponding tool."
msgstr ""
"Plot column. It is visible only for MultiGeo geometries, meaning geometries "
"that holds the geometry\n"
"data into the tools. For those geometries, deleting the tool will delete the "
"geometry data also,\n"
"so be WARNED. From the checkboxes on each row it can be enabled/disabled the "
"plot on canvas\n"
"for the corresponding tool."

#: flatcamGUI/ObjectUI.py:1016
msgid "Tool Offset"
msgstr "Tool Offset"

#: flatcamGUI/ObjectUI.py:1019
msgid ""
"The value to offset the cut when \n"
"the Offset type selected is 'Offset'.\n"
"The value can be positive for 'outside'\n"
"cut and negative for 'inside' cut."
msgstr ""
"The value to offset the cut when \n"
"the Offset type selected is 'Offset'.\n"
"The value can be positive for 'outside'\n"
"cut and negative for 'inside' cut."

#: flatcamGUI/ObjectUI.py:1061 flatcamTools/ToolNonCopperClear.py:239
#: flatcamTools/ToolPaint.py:178
msgid ""
"Add a new tool to the Tool Table\n"
"with the diameter specified above."
msgstr ""
"Add a new tool to the Tool Table\n"
"with the diameter specified above."

#: flatcamGUI/ObjectUI.py:1069
msgid ""
"Copy a selection of tools in the Tool Table\n"
"by first selecting a row in the Tool Table."
msgstr ""
"Copy a selection of tools in the Tool Table\n"
"by first selecting a row in the Tool Table."

#: flatcamGUI/ObjectUI.py:1077
msgid ""
"Delete a selection of tools in the Tool Table\n"
"by first selecting a row in the Tool Table."
msgstr ""
"Delete a selection of tools in the Tool Table\n"
"by first selecting a row in the Tool Table."

#: flatcamGUI/ObjectUI.py:1093
msgid "Tool Data"
msgstr "Tool Data"

#: flatcamGUI/ObjectUI.py:1096
msgid ""
"The data used for creating GCode.\n"
"Each tool store it's own set of such data."
msgstr ""
"The data used for creating GCode.\n"
"Each tool store it's own set of such data."

#: flatcamGUI/ObjectUI.py:1114 flatcamGUI/PreferencesUI.py:3301
#: flatcamTools/ToolNonCopperClear.py:220
msgid "V-Tip Dia"
msgstr "V-Tip Dia"

#: flatcamGUI/ObjectUI.py:1117 flatcamGUI/PreferencesUI.py:3303
#: flatcamTools/ToolNonCopperClear.py:222
msgid "The tip diameter for V-Shape Tool"
msgstr "The tip diameter for V-Shape Tool"

#: flatcamGUI/ObjectUI.py:1125 flatcamGUI/PreferencesUI.py:3310
#: flatcamTools/ToolNonCopperClear.py:227
msgid "V-Tip Angle"
msgstr "V-Tip Angle"

#: flatcamGUI/ObjectUI.py:1128 flatcamGUI/PreferencesUI.py:3312
#: flatcamTools/ToolNonCopperClear.py:229
msgid ""
"The tip angle for V-Shape Tool.\n"
"In degree."
msgstr ""
"The tip angle for V-Shape Tool.\n"
"In degree."

#: flatcamGUI/ObjectUI.py:1140 flatcamGUI/PreferencesUI.py:2636
msgid ""
"Cutting depth (negative)\n"
"below the copper surface."
msgstr ""
"Cutting depth (negative)\n"
"below the copper surface."

#: flatcamGUI/ObjectUI.py:1149 flatcamGUI/PreferencesUI.py:2644
msgid "Multi-Depth"
msgstr "Multi-Depth"

#: flatcamGUI/ObjectUI.py:1152 flatcamGUI/PreferencesUI.py:2647
msgid ""
"Use multiple passes to limit\n"
"the cut depth in each pass. Will\n"
"cut multiple times until Cut Z is\n"
"reached."
msgstr ""
"Use multiple passes to limit\n"
"the cut depth in each pass. Will\n"
"cut multiple times until Cut Z is\n"
"reached."

#: flatcamGUI/ObjectUI.py:1163
msgid "Depth of each pass (positive)."
msgstr "Depth of each pass (positive)."

#: flatcamGUI/ObjectUI.py:1173 flatcamGUI/PreferencesUI.py:2674
msgid ""
"Height of the tool when\n"
"moving without cutting."
msgstr ""
"Height of the tool when\n"
"moving without cutting."

#: flatcamGUI/ObjectUI.py:1192 flatcamGUI/PreferencesUI.py:2685
msgid ""
"Include tool-change sequence\n"
"in the Machine Code (Pause for tool change)."
msgstr ""
"Include tool-change sequence\n"
"in the Machine Code (Pause for tool change)."

#: flatcamGUI/ObjectUI.py:1225 flatcamGUI/PreferencesUI.py:2716
msgid "Feed Rate X-Y"
msgstr "Feed Rate X-Y"

#: flatcamGUI/ObjectUI.py:1227 flatcamGUI/PreferencesUI.py:2718
msgid ""
"Cutting speed in the XY\n"
"plane in units per minute"
msgstr ""
"Cutting speed in the XY\n"
"plane in units per minute"

#: flatcamGUI/ObjectUI.py:1235 flatcamGUI/PreferencesUI.py:2726
msgid "Feed Rate Z"
msgstr "Feed Rate Z"

#: flatcamGUI/ObjectUI.py:1237 flatcamGUI/PreferencesUI.py:2728
msgid ""
"Cutting speed in the XY\n"
"plane in units per minute.\n"
"It is called also Plunge."
msgstr ""
"Cutting speed in the XY\n"
"plane in units per minute.\n"
"It is called also Plunge."

#: flatcamGUI/ObjectUI.py:1246 flatcamGUI/PreferencesUI.py:2821
msgid "Feed Rate Rapids"
msgstr "Feed Rate Rapids"

#: flatcamGUI/ObjectUI.py:1248 flatcamGUI/PreferencesUI.py:2823
msgid ""
"Cutting speed in the XY plane\n"
"(in units per minute).\n"
"This is for the rapid move G00.\n"
"It is useful only for Marlin,\n"
"ignore for any other cases."
msgstr ""
"Cutting speed in the XY plane\n"
"(in units per minute).\n"
"This is for the rapid move G00.\n"
"It is useful only for Marlin,\n"
"ignore for any other cases."

#: flatcamGUI/ObjectUI.py:1262 flatcamGUI/PreferencesUI.py:2834
msgid "Re-cut 1st pt."
msgstr "Re-cut 1st pt."

#: flatcamGUI/ObjectUI.py:1264 flatcamGUI/PreferencesUI.py:2836
msgid ""
"In order to remove possible\n"
"copper leftovers where first cut\n"
"meet with last cut, we generate an\n"
"extended cut over the first cut section."
msgstr ""
"In order to remove possible\n"
"copper leftovers where first cut\n"
"meet with last cut, we generate an\n"
"extended cut over the first cut section."

#: flatcamGUI/ObjectUI.py:1275 flatcamGUI/PreferencesUI.py:2740
msgid ""
"Speed of the spindle in RPM (optional).\n"
"If LASER postprocessor is used,\n"
"this value is the power of laser."
msgstr ""
"Speed of the spindle in RPM (optional).\n"
"If LASER postprocessor is used,\n"
"this value is the power of laser."

#: flatcamGUI/ObjectUI.py:1302 flatcamGUI/PreferencesUI.py:4397
#: flatcamTools/ToolSolderPaste.py:276
msgid "PostProcessor"
msgstr "PostProcessor"

#: flatcamGUI/ObjectUI.py:1304 flatcamGUI/PreferencesUI.py:2769
msgid ""
"The Postprocessor file that dictates\n"
"the Machine Code (like GCode, RML, HPGL) output."
msgstr ""
"The Postprocessor file that dictates\n"
"the Machine Code (like GCode, RML, HPGL) output."

#: flatcamGUI/ObjectUI.py:1337
msgid ""
"Add at least one tool in the tool-table.\n"
"Click the header to select all, or Ctrl + LMB\n"
"for custom selection of tools."
msgstr ""
"Add at least one tool in the tool-table.\n"
"Click the header to select all, or Ctrl + LMB\n"
"for custom selection of tools."

#: flatcamGUI/ObjectUI.py:1344
msgid "Generate"
msgstr "Generate"

#: flatcamGUI/ObjectUI.py:1346
msgid "Generate the CNC Job object."
msgstr "Generate the CNC Job object."

#: flatcamGUI/ObjectUI.py:1353
msgid "Paint Area"
msgstr "Paint Area"

#: flatcamGUI/ObjectUI.py:1356 flatcamGUI/PreferencesUI.py:3682
msgid ""
"Creates tool paths to cover the\n"
"whole area of a polygon (remove\n"
"all copper). You will be asked\n"
"to click on the desired polygon."
msgstr ""
"Creates tool paths to cover the\n"
"whole area of a polygon (remove\n"
"all copper). You will be asked\n"
"to click on the desired polygon."

#: flatcamGUI/ObjectUI.py:1367
msgid "Launch Paint Tool in Tools Tab."
msgstr "Launch Paint Tool in Tools Tab."

#: flatcamGUI/ObjectUI.py:1383
msgid "CNC Job Object"
msgstr "CNC Job Object"

#: flatcamGUI/ObjectUI.py:1401 flatcamGUI/PreferencesUI.py:2970
msgid "Plot kind"
msgstr "Plot kind"

#: flatcamGUI/ObjectUI.py:1404 flatcamGUI/PreferencesUI.py:2972
msgid ""
"This selects the kind of geometries on the canvas to plot.\n"
"Those can be either of type 'Travel' which means the moves\n"
"above the work piece or it can be of type 'Cut',\n"
"which means the moves that cut into the material."
msgstr ""
"This selects the kind of geometries on the canvas to plot.\n"
"Those can be either of type 'Travel' which means the moves\n"
"above the work piece or it can be of type 'Cut',\n"
"which means the moves that cut into the material."

#: flatcamGUI/ObjectUI.py:1413 flatcamGUI/PreferencesUI.py:2980
msgid "Travel"
msgstr "Travel"

#: flatcamGUI/ObjectUI.py:1417 flatcamGUI/PreferencesUI.py:2989
msgid "Display Annotation"
msgstr "Display Annotation"

#: flatcamGUI/ObjectUI.py:1419 flatcamGUI/PreferencesUI.py:2991
msgid ""
"This selects if to display text annotation on the plot.\n"
"When checked it will display numbers in order for each end\n"
"of a travel line."
msgstr ""
"This selects if to display text annotation on the plot.\n"
"When checked it will display numbers in order for each end\n"
"of a travel line."

#: flatcamGUI/ObjectUI.py:1434
msgid "Travelled dist."
msgstr "Travelled dist."

#: flatcamGUI/ObjectUI.py:1436 flatcamGUI/ObjectUI.py:1441
msgid ""
"This is the total travelled distance on X-Y plane.\n"
"In current units."
msgstr ""
"This is the total travelled distance on X-Y plane.\n"
"In current units."

#: flatcamGUI/ObjectUI.py:1446
msgid "Estimated time"
msgstr "Estimated time"

#: flatcamGUI/ObjectUI.py:1448 flatcamGUI/ObjectUI.py:1453
msgid ""
"This is the estimated time to do the routing/drilling,\n"
"without the time spent in ToolChange events."
msgstr ""
"This is the estimated time to do the routing/drilling,\n"
"without the time spent in ToolChange events."

#: flatcamGUI/ObjectUI.py:1488
msgid "CNC Tools Table"
msgstr "CNC Tools Table"

#: flatcamGUI/ObjectUI.py:1491
msgid ""
"Tools in this CNCJob object used for cutting.\n"
"The tool diameter is used for plotting on canvas.\n"
"The 'Offset' entry will set an offset for the cut.\n"
"'Offset' can be inside, outside, on path (none) and custom.\n"
"'Type' entry is only informative and it allow to know the \n"
"intent of using the current tool. \n"
"It can be Rough(ing), Finish(ing) or Iso(lation).\n"
"The 'Tool type'(TT) can be circular with 1 to 4 teeths(C1..C4),\n"
"ball(B), or V-Shaped(V)."
msgstr ""
"Tools in this CNCJob object used for cutting.\n"
"The tool diameter is used for plotting on canvas.\n"
"The 'Offset' entry will set an offset for the cut.\n"
"'Offset' can be inside, outside, on path (none) and custom.\n"
"'Type' entry is only informative and it allow to know the \n"
"intent of using the current tool. \n"
"It can be Rough(ing), Finish(ing) or Iso(lation).\n"
"The 'Tool type'(TT) can be circular with 1 to 4 teeths(C1..C4),\n"
"ball(B), or V-Shaped(V)."

#: flatcamGUI/ObjectUI.py:1523
msgid "P"
msgstr "P"

#: flatcamGUI/ObjectUI.py:1529
msgid "Update Plot"
msgstr "Update Plot"

#: flatcamGUI/ObjectUI.py:1531
msgid "Update the plot."
msgstr "Update the plot."

#: flatcamGUI/ObjectUI.py:1538 flatcamGUI/PreferencesUI.py:3128
msgid "Export CNC Code"
msgstr "Export CNC Code"

#: flatcamGUI/ObjectUI.py:1540 flatcamGUI/PreferencesUI.py:3079
#: flatcamGUI/PreferencesUI.py:3130
msgid ""
"Export and save G-Code to\n"
"make this object to a file."
msgstr ""
"Export and save G-Code to\n"
"make this object to a file."

#: flatcamGUI/ObjectUI.py:1546
msgid "Prepend to CNC Code"
msgstr "Prepend to CNC Code"

#: flatcamGUI/ObjectUI.py:1548 flatcamGUI/PreferencesUI.py:3095
msgid ""
"Type here any G-Code commands you would\n"
"like to add at the beginning of the G-Code file."
msgstr ""
"Type here any G-Code commands you would\n"
"like to add at the beginning of the G-Code file."

#: flatcamGUI/ObjectUI.py:1557
msgid "Append to CNC Code"
msgstr "Append to CNC Code"

#: flatcamGUI/ObjectUI.py:1559 flatcamGUI/PreferencesUI.py:3107
msgid ""
"Type here any G-Code commands you would\n"
"like to append to the generated file.\n"
"I.e.: M2 (End of program)"
msgstr ""
"Type here any G-Code commands you would\n"
"like to append to the generated file.\n"
"I.e.: M2 (End of program)"

#: flatcamGUI/ObjectUI.py:1576 flatcamGUI/PreferencesUI.py:3136
msgid "Toolchange G-Code"
msgstr "Toolchange G-Code"

#: flatcamGUI/ObjectUI.py:1579 flatcamGUI/PreferencesUI.py:3139
msgid ""
"Type here any G-Code commands you would\n"
"like to be executed when Toolchange event is encountered.\n"
"This will constitute a Custom Toolchange GCode,\n"
"or a Toolchange Macro.\n"
"The FlatCAM variables are surrounded by '%' symbol.\n"
"\n"
"WARNING: it can be used only with a postprocessor file\n"
"that has 'toolchange_custom' in it's name and this is built\n"
"having as template the 'Toolchange Custom' posprocessor file."
msgstr ""
"Type here any G-Code commands you would\n"
"like to be executed when Toolchange event is encountered.\n"
"This will constitute a Custom Toolchange GCode,\n"
"or a Toolchange Macro.\n"
"The FlatCAM variables are surrounded by '%' symbol.\n"
"\n"
"WARNING: it can be used only with a postprocessor file\n"
"that has 'toolchange_custom' in it's name and this is built\n"
"having as template the 'Toolchange Custom' posprocessor file."

#: flatcamGUI/ObjectUI.py:1598 flatcamGUI/PreferencesUI.py:3167
msgid "Use Toolchange Macro"
msgstr "Use Toolchange Macro"

#: flatcamGUI/ObjectUI.py:1600 flatcamGUI/PreferencesUI.py:3169
msgid ""
"Check this box if you want to use\n"
"a Custom Toolchange GCode (macro)."
msgstr ""
"Check this box if you want to use\n"
"a Custom Toolchange GCode (macro)."

#: flatcamGUI/ObjectUI.py:1608 flatcamGUI/PreferencesUI.py:3181
msgid ""
"A list of the FlatCAM variables that can be used\n"
"in the Toolchange event.\n"
"They have to be surrounded by the '%' symbol"
msgstr ""
"A list of the FlatCAM variables that can be used\n"
"in the Toolchange event.\n"
"They have to be surrounded by the '%' symbol"

#: flatcamGUI/ObjectUI.py:1615 flatcamGUI/PreferencesUI.py:1419
#: flatcamGUI/PreferencesUI.py:2318 flatcamGUI/PreferencesUI.py:2921
#: flatcamGUI/PreferencesUI.py:3188 flatcamGUI/PreferencesUI.py:3263
#: flatcamGUI/PreferencesUI.py:3522 flatcamGUI/PreferencesUI.py:3621
#: flatcamGUI/PreferencesUI.py:3832 flatcamGUI/PreferencesUI.py:3913
#: flatcamGUI/PreferencesUI.py:4112 flatcamGUI/PreferencesUI.py:4244
#: flatcamGUI/PreferencesUI.py:4417 flatcamTools/ToolNonCopperClear.py:265
msgid "Parameters"
msgstr "Parameters"

#: flatcamGUI/ObjectUI.py:1618 flatcamGUI/PreferencesUI.py:3191
msgid "FlatCAM CNC parameters"
msgstr "FlatCAM CNC parameters"

#: flatcamGUI/ObjectUI.py:1619 flatcamGUI/PreferencesUI.py:3192
msgid "tool = tool number"
msgstr "tool = tool number"

#: flatcamGUI/ObjectUI.py:1620 flatcamGUI/PreferencesUI.py:3193
msgid "tooldia = tool diameter"
msgstr "tooldia = tool diameter"

#: flatcamGUI/ObjectUI.py:1621 flatcamGUI/PreferencesUI.py:3194
msgid "t_drills = for Excellon, total number of drills"
msgstr "t_drills = for Excellon, total number of drills"

#: flatcamGUI/ObjectUI.py:1622 flatcamGUI/PreferencesUI.py:3195
msgid "x_toolchange = X coord for Toolchange"
msgstr "x_toolchange = X coord for Toolchange"

#: flatcamGUI/ObjectUI.py:1623 flatcamGUI/PreferencesUI.py:3196
msgid "y_toolchange = Y coord for Toolchange"
msgstr "y_toolchange = Y coord for Toolchange"

#: flatcamGUI/ObjectUI.py:1624 flatcamGUI/PreferencesUI.py:3197
msgid "z_toolchange = Z coord for Toolchange"
msgstr "z_toolchange = Z coord for Toolchange"

#: flatcamGUI/ObjectUI.py:1625
msgid "z_cut = depth where to cut"
msgstr "z_cut = depth where to cut"

#: flatcamGUI/ObjectUI.py:1626
msgid "z_move = height where to travel"
msgstr "z_move = height where to travel"

#: flatcamGUI/ObjectUI.py:1627 flatcamGUI/PreferencesUI.py:3200
msgid "z_depthpercut = the step value for multidepth cut"
msgstr "z_depthpercut = the step value for multidepth cut"

#: flatcamGUI/ObjectUI.py:1628 flatcamGUI/PreferencesUI.py:3201
msgid "spindlesspeed = the value for the spindle speed"
msgstr "spindlesspeed = the value for the spindle speed"

#: flatcamGUI/ObjectUI.py:1629 flatcamGUI/PreferencesUI.py:3203
msgid "dwelltime = time to dwell to allow the spindle to reach it's set RPM"
msgstr "dwelltime = time to dwell to allow the spindle to reach it's set RPM"

#: flatcamGUI/ObjectUI.py:1645
msgid "View CNC Code"
msgstr "View CNC Code"

#: flatcamGUI/ObjectUI.py:1647
msgid ""
"Opens TAB to view/modify/print G-Code\n"
"file."
msgstr ""
"Opens TAB to view/modify/print G-Code\n"
"file."

#: flatcamGUI/ObjectUI.py:1652
msgid "Save CNC Code"
msgstr "Save CNC Code"

#: flatcamGUI/ObjectUI.py:1654
msgid ""
"Opens dialog to save G-Code\n"
"file."
msgstr ""
"Opens dialog to save G-Code\n"
"file."

#: flatcamGUI/PreferencesUI.py:257
msgid "GUI Preferences"
msgstr "GUI Preferences"

#: flatcamGUI/PreferencesUI.py:263
msgid "Grid X value"
msgstr "Grid X value"

#: flatcamGUI/PreferencesUI.py:265
msgid "This is the Grid snap value on X axis."
msgstr "This is the Grid snap value on X axis."

#: flatcamGUI/PreferencesUI.py:270
msgid "Grid Y value"
msgstr "Grid Y value"

#: flatcamGUI/PreferencesUI.py:272
msgid "This is the Grid snap value on Y axis."
msgstr "This is the Grid snap value on Y axis."

#: flatcamGUI/PreferencesUI.py:277
msgid "Snap Max"
msgstr "Snap Max"

#: flatcamGUI/PreferencesUI.py:282
msgid "Workspace"
msgstr "Workspace"

#: flatcamGUI/PreferencesUI.py:284
msgid ""
"Draw a delimiting rectangle on canvas.\n"
"The purpose is to illustrate the limits for our work."
msgstr ""
"Draw a delimiting rectangle on canvas.\n"
"The purpose is to illustrate the limits for our work."

#: flatcamGUI/PreferencesUI.py:287
msgid "Wk. format"
msgstr "Wk. format"

#: flatcamGUI/PreferencesUI.py:289
msgid ""
"Select the type of rectangle to be used on canvas,\n"
"as valid workspace."
msgstr ""
"Select the type of rectangle to be used on canvas,\n"
"as valid workspace."

#: flatcamGUI/PreferencesUI.py:302
msgid "Plot Fill"
msgstr "Plot Fill"

#: flatcamGUI/PreferencesUI.py:304
msgid ""
"Set the fill color for plotted objects.\n"
"First 6 digits are the color and the last 2\n"
"digits are for alpha (transparency) level."
msgstr ""
"Set the fill color for plotted objects.\n"
"First 6 digits are the color and the last 2\n"
"digits are for alpha (transparency) level."

#: flatcamGUI/PreferencesUI.py:318 flatcamGUI/PreferencesUI.py:368
#: flatcamGUI/PreferencesUI.py:418
msgid "Alpha Level"
msgstr "Alpha Level"

#: flatcamGUI/PreferencesUI.py:320
msgid "Set the fill transparency for plotted objects."
msgstr "Set the fill transparency for plotted objects."

#: flatcamGUI/PreferencesUI.py:337
msgid "Plot Line"
msgstr "Plot Line"

#: flatcamGUI/PreferencesUI.py:339
msgid "Set the line color for plotted objects."
msgstr "Set the line color for plotted objects."

#: flatcamGUI/PreferencesUI.py:351
msgid "Sel. Fill"
msgstr "Sel. Fill"

#: flatcamGUI/PreferencesUI.py:353
msgid ""
"Set the fill color for the selection box\n"
"in case that the selection is done from left to right.\n"
"First 6 digits are the color and the last 2\n"
"digits are for alpha (transparency) level."
msgstr ""
"Set the fill color for the selection box\n"
"in case that the selection is done from left to right.\n"
"First 6 digits are the color and the last 2\n"
"digits are for alpha (transparency) level."

#: flatcamGUI/PreferencesUI.py:370
msgid "Set the fill transparency for the 'left to right' selection box."
msgstr "Set the fill transparency for the 'left to right' selection box."

#: flatcamGUI/PreferencesUI.py:387
msgid "Sel. Line"
msgstr "Sel. Line"

#: flatcamGUI/PreferencesUI.py:389
msgid "Set the line color for the 'left to right' selection box."
msgstr "Set the line color for the 'left to right' selection box."

#: flatcamGUI/PreferencesUI.py:401
msgid "Sel2. Fill"
msgstr "Sel2. Fill"

#: flatcamGUI/PreferencesUI.py:403
msgid ""
"Set the fill color for the selection box\n"
"in case that the selection is done from right to left.\n"
"First 6 digits are the color and the last 2\n"
"digits are for alpha (transparency) level."
msgstr ""
"Set the fill color for the selection box\n"
"in case that the selection is done from right to left.\n"
"First 6 digits are the color and the last 2\n"
"digits are for alpha (transparency) level."

#: flatcamGUI/PreferencesUI.py:420
msgid "Set the fill transparency for selection 'right to left' box."
msgstr "Set the fill transparency for selection 'right to left' box."

#: flatcamGUI/PreferencesUI.py:437
msgid "Sel2. Line"
msgstr "Sel2. Line"

#: flatcamGUI/PreferencesUI.py:439
msgid "Set the line color for the 'right to left' selection box."
msgstr "Set the line color for the 'right to left' selection box."

#: flatcamGUI/PreferencesUI.py:451
msgid "Editor Draw"
msgstr "Editor Draw"

#: flatcamGUI/PreferencesUI.py:453
msgid "Set the color for the shape."
msgstr "Set the color for the shape."

#: flatcamGUI/PreferencesUI.py:465
msgid "Editor Draw Sel."
msgstr "Editor Draw Sel."

#: flatcamGUI/PreferencesUI.py:467
msgid "Set the color of the shape when selected."
msgstr "Set the color of the shape when selected."

#: flatcamGUI/PreferencesUI.py:479
msgid "Project Items"
msgstr "Project Items"

#: flatcamGUI/PreferencesUI.py:481
msgid "Set the color of the items in Project Tab Tree."
msgstr "Set the color of the items in Project Tab Tree."

#: flatcamGUI/PreferencesUI.py:492
msgid "Proj. Dis. Items"
msgstr "Proj. Dis. Items"

#: flatcamGUI/PreferencesUI.py:494
msgid ""
"Set the color of the items in Project Tab Tree,\n"
"for the case when the items are disabled."
msgstr ""
"Set the color of the items in Project Tab Tree,\n"
"for the case when the items are disabled."

#: flatcamGUI/PreferencesUI.py:507
msgid "Activity Icon"
msgstr "Activity Icon"

#: flatcamGUI/PreferencesUI.py:509
msgid "Select the GIF that show activity when FlatCAM is active."
msgstr "Select the GIF that show activity when FlatCAM is active."

#: flatcamGUI/PreferencesUI.py:555
msgid "GUI Settings"
msgstr "GUI Settings"

#: flatcamGUI/PreferencesUI.py:561
msgid "Layout"
msgstr "Layout"

#: flatcamGUI/PreferencesUI.py:563
msgid ""
"Select an layout for FlatCAM.\n"
"It is applied immediately."
msgstr ""
"Select an layout for FlatCAM.\n"
"It is applied immediately."

#: flatcamGUI/PreferencesUI.py:579
msgid "Style"
msgstr "Style"

#: flatcamGUI/PreferencesUI.py:581
msgid ""
"Select an style for FlatCAM.\n"
"It will be applied at the next app start."
msgstr ""
"Select an style for FlatCAM.\n"
"It will be applied at the next app start."

#: flatcamGUI/PreferencesUI.py:592
msgid "HDPI Support"
msgstr "HDPI Support"

#: flatcamGUI/PreferencesUI.py:594
msgid ""
"Enable High DPI support for FlatCAM.\n"
"It will be applied at the next app start."
msgstr ""
"Enable High DPI support for FlatCAM.\n"
"It will be applied at the next app start."

#: flatcamGUI/PreferencesUI.py:607 flatcamGUI/PreferencesUI.py:815
msgid "Clear GUI Settings"
msgstr "Clear GUI Settings"

#: flatcamGUI/PreferencesUI.py:609
msgid ""
"Clear the GUI settings for FlatCAM,\n"
"such as: layout, gui state, style, hdpi support etc."
msgstr ""
"Clear the GUI settings for FlatCAM,\n"
"such as: layout, gui state, style, hdpi support etc."

#: flatcamGUI/PreferencesUI.py:612
msgid "Clear"
msgstr "Clear"

#: flatcamGUI/PreferencesUI.py:616
msgid "Hover Shape"
msgstr "Hover Shape"

#: flatcamGUI/PreferencesUI.py:618
msgid ""
"Enable display of a hover shape for FlatCAM objects.\n"
"It is displayed whenever the mouse cursor is hovering\n"
"over any kind of not-selected object."
msgstr ""
"Enable display of a hover shape for FlatCAM objects.\n"
"It is displayed whenever the mouse cursor is hovering\n"
"over any kind of not-selected object."

#: flatcamGUI/PreferencesUI.py:625
msgid "Sel. Shape"
msgstr "Sel. Shape"

#: flatcamGUI/PreferencesUI.py:627
msgid ""
"Enable the display of a selection shape for FlatCAM objects.\n"
"It is displayed whenever the mouse selects an object\n"
"either by clicking or dragging mouse from left to right or\n"
"right to left."
msgstr ""
"Enable the display of a selection shape for FlatCAM objects.\n"
"It is displayed whenever the mouse selects an object\n"
"either by clicking or dragging mouse from left to right or\n"
"right to left."

#: flatcamGUI/PreferencesUI.py:635
msgid "NB Font Size"
msgstr "NB Font Size"

#: flatcamGUI/PreferencesUI.py:637
msgid ""
"This sets the font size for the elements found in the Notebook.\n"
"The notebook is the collapsible area in the left side of the GUI,\n"
"and include the Project, Selected and Tool tabs."
msgstr ""
"This sets the font size for the elements found in the Notebook.\n"
"The notebook is the collapsible area in the left side of the GUI,\n"
"and include the Project, Selected and Tool tabs."

#: flatcamGUI/PreferencesUI.py:653
msgid "Axis Font Size"
msgstr "Axis Font Size"

#: flatcamGUI/PreferencesUI.py:655
msgid "This sets the font size for canvas axis."
msgstr "This sets the font size for canvas axis."

#: flatcamGUI/PreferencesUI.py:669
#| msgid "Axis Font Size"
msgid "Textbox Font Size"
msgstr "Textbox Font Size"

#: flatcamGUI/PreferencesUI.py:671
msgid ""
"This sets the font size for the Textbox GUI\n"
"elements that are used in FlatCAM."
msgstr ""
"This sets the font size for the Textbox GUI\n"
"elements that are used in FlatCAM."

#: flatcamGUI/PreferencesUI.py:689
msgid "Splash Screen"
msgstr "Splash Screen"

#: flatcamGUI/PreferencesUI.py:691
msgid "Enable display of the splash screen at application startup."
msgstr "Enable display of the splash screen at application startup."

#: flatcamGUI/PreferencesUI.py:701
msgid "Sys Tray Icon"
msgstr "Sys Tray Icon"

#: flatcamGUI/PreferencesUI.py:703
msgid "Enable display of FlatCAM icon in Sys Tray."
msgstr "Enable display of FlatCAM icon in Sys Tray."

#: flatcamGUI/PreferencesUI.py:708
msgid "Shell at StartUp"
msgstr "Shell at StartUp"

#: flatcamGUI/PreferencesUI.py:710 flatcamGUI/PreferencesUI.py:715
msgid ""
"Check this box if you want the shell to\n"
"start automatically at startup."
msgstr ""
"Check this box if you want the shell to\n"
"start automatically at startup."

#: flatcamGUI/PreferencesUI.py:720
msgid "Project at StartUp"
msgstr "Project at StartUp"

#: flatcamGUI/PreferencesUI.py:722 flatcamGUI/PreferencesUI.py:727
msgid ""
"Check this box if you want the project/selected/tool tab area to\n"
"to be shown automatically at startup."
msgstr ""
"Check this box if you want the project/selected/tool tab area to\n"
"to be shown automatically at startup."

#: flatcamGUI/PreferencesUI.py:732
msgid "Project AutoHide"
msgstr "Project AutoHide"

#: flatcamGUI/PreferencesUI.py:734 flatcamGUI/PreferencesUI.py:740
msgid ""
"Check this box if you want the project/selected/tool tab area to\n"
"hide automatically when there are no objects loaded and\n"
"to show whenever a new object is created."
msgstr ""
"Check this box if you want the project/selected/tool tab area to\n"
"hide automatically when there are no objects loaded and\n"
"to show whenever a new object is created."

#: flatcamGUI/PreferencesUI.py:746
msgid "Enable ToolTips"
msgstr "Enable ToolTips"

#: flatcamGUI/PreferencesUI.py:748 flatcamGUI/PreferencesUI.py:753
msgid ""
"Check this box if you want to have toolTips displayed\n"
"when hovering with mouse over items throughout the App."
msgstr ""
"Check this box if you want to have toolTips displayed\n"
"when hovering with mouse over items throughout the App."

#: flatcamGUI/PreferencesUI.py:784
msgid "Delete object confirmation"
msgstr "Delete object confirmation"

#: flatcamGUI/PreferencesUI.py:786
msgid ""
"When checked the application will ask for user confirmation\n"
"whenever the Delete object(s) event is triggered, either by\n"
"menu shortcut or key shortcut."
msgstr ""
"When checked the application will ask for user confirmation\n"
"whenever the Delete object(s) event is triggered, either by\n"
"menu shortcut or key shortcut."

#: flatcamGUI/PreferencesUI.py:812
msgid "Are you sure you want to delete the GUI Settings? \n"
msgstr "Are you sure you want to delete the GUI Settings? \n"

#: flatcamGUI/PreferencesUI.py:836
msgid "App Preferences"
msgstr "App Preferences"

#: flatcamGUI/PreferencesUI.py:842 flatcamGUI/PreferencesUI.py:1336
#: flatcamGUI/PreferencesUI.py:2179 flatcamTools/ToolMeasurement.py:43
#: flatcamTools/ToolPcbWizard.py:127 flatcamTools/ToolProperties.py:133
msgid "Units"
msgstr "Units"

#: flatcamGUI/PreferencesUI.py:843
msgid ""
"The default value for FlatCAM units.\n"
"Whatever is selected here is set every time\n"
"FLatCAM is started."
msgstr ""
"The default value for FlatCAM units.\n"
"Whatever is selected here is set every time\n"
"FLatCAM is started."

#: flatcamGUI/PreferencesUI.py:846
msgid "IN"
msgstr "IN"

#: flatcamGUI/PreferencesUI.py:847 flatcamGUI/PreferencesUI.py:1342
#: flatcamGUI/PreferencesUI.py:1774 flatcamGUI/PreferencesUI.py:2185
#: flatcamTools/ToolCalculators.py:61 flatcamTools/ToolPcbWizard.py:126
msgid "MM"
msgstr "MM"

#: flatcamGUI/PreferencesUI.py:850
msgid "APP. LEVEL"
msgstr "APP. LEVEL"

#: flatcamGUI/PreferencesUI.py:851
msgid ""
"Choose the default level of usage for FlatCAM.\n"
"BASIC level -> reduced functionality, best for beginner's.\n"
"ADVANCED level -> full functionality.\n"
"\n"
"The choice here will influence the parameters in\n"
"the Selected Tab for all kinds of FlatCAM objects."
msgstr ""
"Choose the default level of usage for FlatCAM.\n"
"BASIC level -> reduced functionality, best for beginner's.\n"
"ADVANCED level -> full functionality.\n"
"\n"
"The choice here will influence the parameters in\n"
"the Selected Tab for all kinds of FlatCAM objects."

#: flatcamGUI/PreferencesUI.py:860
msgid "Portable app"
msgstr "Portable app"

#: flatcamGUI/PreferencesUI.py:861
msgid ""
"Choose if the application should run as portable.\n"
"\n"
"If Checked the application will run portable,\n"
"which means that the preferences files will be saved\n"
"in the application folder, in the lib\\config subfolder."
msgstr ""
"Choose if the application should run as portable.\n"
"\n"
"If Checked the application will run portable,\n"
"which means that the preferences files will be saved\n"
"in the application folder, in the lib\\config subfolder."

#: flatcamGUI/PreferencesUI.py:868
msgid "Languages"
msgstr "Languages"

#: flatcamGUI/PreferencesUI.py:869
msgid "Set the language used throughout FlatCAM."
msgstr "Set the language used throughout FlatCAM."

#: flatcamGUI/PreferencesUI.py:872
msgid "Apply Language"
msgstr "Apply Language"

#: flatcamGUI/PreferencesUI.py:873
msgid ""
"Set the language used throughout FlatCAM.\n"
"The app will restart after click.Windows: When FlatCAM is installed in "
"Program Files\n"
"directory, it is possible that the app will not\n"
"restart after the button is clicked due of Windows\n"
"security features. In this case the language will be\n"
"applied at the next app start."
msgstr ""
"Set the language used throughout FlatCAM.\n"
"The app will restart after click.Windows: When FlatCAM is installed in "
"Program Files\n"
"directory, it is possible that the app will not\n"
"restart after the button is clicked due of Windows\n"
"security features. In this case the language will be\n"
"applied at the next app start."

#: flatcamGUI/PreferencesUI.py:882
msgid "Version Check"
msgstr "Version Check"

#: flatcamGUI/PreferencesUI.py:884 flatcamGUI/PreferencesUI.py:889
msgid ""
"Check this box if you want to check\n"
"for a new version automatically at startup."
msgstr ""
"Check this box if you want to check\n"
"for a new version automatically at startup."

#: flatcamGUI/PreferencesUI.py:894
msgid "Send Stats"
msgstr "Send Stats"

#: flatcamGUI/PreferencesUI.py:896 flatcamGUI/PreferencesUI.py:901
msgid ""
"Check this box if you agree to send anonymous\n"
"stats automatically at startup, to help improve FlatCAM."
msgstr ""
"Check this box if you agree to send anonymous\n"
"stats automatically at startup, to help improve FlatCAM."

#: flatcamGUI/PreferencesUI.py:908
msgid "Pan Button"
msgstr "Pan Button"

#: flatcamGUI/PreferencesUI.py:909
msgid ""
"Select the mouse button to use for panning:\n"
"- MMB --> Middle Mouse Button\n"
"- RMB --> Right Mouse Button"
msgstr ""
"Select the mouse button to use for panning:\n"
"- MMB --> Middle Mouse Button\n"
"- RMB --> Right Mouse Button"

#: flatcamGUI/PreferencesUI.py:912
msgid "MMB"
msgstr "MMB"

#: flatcamGUI/PreferencesUI.py:913
msgid "RMB"
msgstr "RMB"

#: flatcamGUI/PreferencesUI.py:916
msgid "Multiple Sel"
msgstr "Multiple Sel"

#: flatcamGUI/PreferencesUI.py:917
msgid "Select the key used for multiple selection."
msgstr "Select the key used for multiple selection."

#: flatcamGUI/PreferencesUI.py:918
msgid "CTRL"
msgstr "CTRL"

#: flatcamGUI/PreferencesUI.py:919
msgid "SHIFT"
msgstr "SHIFT"

#: flatcamGUI/PreferencesUI.py:922
msgid "Workers number"
msgstr "Workers number"

#: flatcamGUI/PreferencesUI.py:924 flatcamGUI/PreferencesUI.py:933
msgid ""
"The number of Qthreads made available to the App.\n"
"A bigger number may finish the jobs more quickly but\n"
"depending on your computer speed, may make the App\n"
"unresponsive. Can have a value between 2 and 16.\n"
"Default value is 2.\n"
"After change, it will be applied at next App start."
msgstr ""
"The number of Qthreads made available to the App.\n"
"A bigger number may finish the jobs more quickly but\n"
"depending on your computer speed, may make the App\n"
"unresponsive. Can have a value between 2 and 16.\n"
"Default value is 2.\n"
"After change, it will be applied at next App start."

#: flatcamGUI/PreferencesUI.py:943
msgid "Geo Tolerance"
msgstr "Geo Tolerance"

#: flatcamGUI/PreferencesUI.py:945 flatcamGUI/PreferencesUI.py:954
msgid ""
"This value can counter the effect of the Circle Steps\n"
"parameter. Default value is 0.01.\n"
"A lower value will increase the detail both in image\n"
"and in Gcode for the circles, with a higher cost in\n"
"performance. Higher value will provide more\n"
"performance at the expense of level of detail."
msgstr ""
"This value can counter the effect of the Circle Steps\n"
"parameter. Default value is 0.01.\n"
"A lower value will increase the detail both in image\n"
"and in Gcode for the circles, with a higher cost in\n"
"performance. Higher value will provide more\n"
"performance at the expense of level of detail."

#: flatcamGUI/PreferencesUI.py:989
msgid "\"Open\" behavior"
msgstr "\"Open\" behavior"

#: flatcamGUI/PreferencesUI.py:991
msgid ""
"When checked the path for the last saved file is used when saving files,\n"
"and the path for the last opened file is used when opening files.\n"
"\n"
"When unchecked the path for opening files is the one used last: either the\n"
"path for saving files or the path for opening files."
msgstr ""
"When checked the path for the last saved file is used when saving files,\n"
"and the path for the last opened file is used when opening files.\n"
"\n"
"When unchecked the path for opening files is the one used last: either the\n"
"path for saving files or the path for opening files."

#: flatcamGUI/PreferencesUI.py:1000
msgid "Save Compressed Project"
msgstr "Save Compressed Project"

#: flatcamGUI/PreferencesUI.py:1002
msgid ""
"Whether to save a compressed or uncompressed project.\n"
"When checked it will save a compressed FlatCAM project."
msgstr ""
"Whether to save a compressed or uncompressed project.\n"
"When checked it will save a compressed FlatCAM project."

#: flatcamGUI/PreferencesUI.py:1013
msgid "Compression Level"
msgstr "Compression Level"

#: flatcamGUI/PreferencesUI.py:1015
msgid ""
"The level of compression used when saving\n"
"a FlatCAM project. Higher value means better compression\n"
"but require more RAM usage and more processing time."
msgstr ""
"The level of compression used when saving\n"
"a FlatCAM project. Higher value means better compression\n"
"but require more RAM usage and more processing time."

#: flatcamGUI/PreferencesUI.py:1042
msgid "Gerber General"
msgstr "Gerber General"

#: flatcamGUI/PreferencesUI.py:1073 flatcamGUI/PreferencesUI.py:2587
#: flatcamGUI/PreferencesUI.py:3005
msgid "Circle Steps"
msgstr "Circle Steps"

#: flatcamGUI/PreferencesUI.py:1075
msgid ""
"The number of circle steps for Gerber \n"
"circular aperture linear approximation."
msgstr ""
"The number of circle steps for Gerber \n"
"circular aperture linear approximation."

#: flatcamGUI/PreferencesUI.py:1090
msgid "Gerber Options"
msgstr "Gerber Options"

#: flatcamGUI/PreferencesUI.py:1222
msgid "Gerber Adv. Options"
msgstr "Gerber Adv. Options"

#: flatcamGUI/PreferencesUI.py:1225 flatcamGUI/PreferencesUI.py:2050
#: flatcamGUI/PreferencesUI.py:2790
msgid "Advanced Options"
msgstr "Advanced Options"

#: flatcamGUI/PreferencesUI.py:1227
msgid ""
"A list of Gerber advanced parameters.\n"
"Those parameters are available only for\n"
"Advanced App. Level."
msgstr ""
"A list of Gerber advanced parameters.\n"
"Those parameters are available only for\n"
"Advanced App. Level."

#: flatcamGUI/PreferencesUI.py:1246
msgid "Table Show/Hide"
msgstr "Table Show/Hide"

#: flatcamGUI/PreferencesUI.py:1248
msgid ""
"Toggle the display of the Gerber Apertures Table.\n"
"Also, on hide, it will delete all mark shapes\n"
"that are drawn on canvas."
msgstr ""
"Toggle the display of the Gerber Apertures Table.\n"
"Also, on hide, it will delete all mark shapes\n"
"that are drawn on canvas."

#: flatcamGUI/PreferencesUI.py:1258
msgid ""
"Buffering type:\n"
"- None --> best performance, fast file loading but no so good display\n"
"- Full --> slow file loading but good visuals. This is the default.\n"
"<<WARNING>>: Don't change this unless you know what you are doing !!!"
msgstr ""
"Buffering type:\n"
"- None --> best performance, fast file loading but no so good display\n"
"- Full --> slow file loading but good visuals. This is the default.\n"
"<<WARNING>>: Don't change this unless you know what you are doing !!!"

#: flatcamGUI/PreferencesUI.py:1263 flatcamTools/ToolProperties.py:298
#: flatcamTools/ToolProperties.py:312 flatcamTools/ToolProperties.py:315
#: flatcamTools/ToolProperties.py:318
msgid "None"
msgstr "None"

#: flatcamGUI/PreferencesUI.py:1264
msgid "Full"
msgstr "Full"

#: flatcamGUI/PreferencesUI.py:1269
msgid "Simplify"
msgstr "Simplify"

#: flatcamGUI/PreferencesUI.py:1270
msgid ""
"When checked all the Gerber polygons will be\n"
"loaded with simplification having a set tolerance."
msgstr ""
"When checked all the Gerber polygons will be\n"
"loaded with simplification having a set tolerance."

#: flatcamGUI/PreferencesUI.py:1275
msgid "Tolerance"
msgstr "Tolerance"

#: flatcamGUI/PreferencesUI.py:1276
msgid "Tolerance for poligon simplification."
msgstr "Tolerance for poligon simplification."

#: flatcamGUI/PreferencesUI.py:1322
msgid "Gerber Export"
msgstr "Gerber Export"

#: flatcamGUI/PreferencesUI.py:1325 flatcamGUI/PreferencesUI.py:2168
msgid "Export Options"
msgstr "Export Options"

#: flatcamGUI/PreferencesUI.py:1327
msgid ""
"The parameters set here are used in the file exported\n"
"when using the File -> Export -> Export Gerber menu entry."
msgstr ""
"The parameters set here are used in the file exported\n"
"when using the File -> Export -> Export Gerber menu entry."

#: flatcamGUI/PreferencesUI.py:1338 flatcamGUI/PreferencesUI.py:1344
msgid "The units used in the Gerber file."
msgstr "The units used in the Gerber file."

#: flatcamGUI/PreferencesUI.py:1341 flatcamGUI/PreferencesUI.py:1671
#: flatcamGUI/PreferencesUI.py:1773 flatcamGUI/PreferencesUI.py:2184
#: flatcamTools/ToolCalculators.py:60 flatcamTools/ToolPcbWizard.py:125
msgid "INCH"
msgstr "INCH"

#: flatcamGUI/PreferencesUI.py:1350 flatcamGUI/PreferencesUI.py:2193
msgid "Int/Decimals"
msgstr "Int/Decimals"

#: flatcamGUI/PreferencesUI.py:1352
msgid ""
"The number of digits in the whole part of the number\n"
"and in the fractional part of the number."
msgstr ""
"The number of digits in the whole part of the number\n"
"and in the fractional part of the number."

#: flatcamGUI/PreferencesUI.py:1363
msgid ""
"This numbers signify the number of digits in\n"
"the whole part of Gerber coordinates."
msgstr ""
"This numbers signify the number of digits in\n"
"the whole part of Gerber coordinates."

#: flatcamGUI/PreferencesUI.py:1377
msgid ""
"This numbers signify the number of digits in\n"
"the decimal part of Gerber coordinates."
msgstr ""
"This numbers signify the number of digits in\n"
"the decimal part of Gerber coordinates."

#: flatcamGUI/PreferencesUI.py:1386 flatcamGUI/PreferencesUI.py:2254
msgid "Zeros"
msgstr "Zeros"

#: flatcamGUI/PreferencesUI.py:1389 flatcamGUI/PreferencesUI.py:1399
msgid ""
"This sets the type of Gerber zeros.\n"
"If LZ then Leading Zeros are removed and\n"
"Trailing Zeros are kept.\n"
"If TZ is checked then Trailing Zeros are removed\n"
"and Leading Zeros are kept."
msgstr ""
"This sets the type of Gerber zeros.\n"
"If LZ then Leading Zeros are removed and\n"
"Trailing Zeros are kept.\n"
"If TZ is checked then Trailing Zeros are removed\n"
"and Leading Zeros are kept."

#: flatcamGUI/PreferencesUI.py:1396 flatcamGUI/PreferencesUI.py:1749
#: flatcamGUI/PreferencesUI.py:2264 flatcamTools/ToolPcbWizard.py:111
msgid "LZ"
msgstr "LZ"

#: flatcamGUI/PreferencesUI.py:1397 flatcamGUI/PreferencesUI.py:1750
#: flatcamGUI/PreferencesUI.py:2265 flatcamTools/ToolPcbWizard.py:112
msgid "TZ"
msgstr "TZ"

#: flatcamGUI/PreferencesUI.py:1421
msgid "A list of Gerber Editor parameters."
msgstr "A list of Gerber Editor parameters."

#: flatcamGUI/PreferencesUI.py:1429 flatcamGUI/PreferencesUI.py:2328
#: flatcamGUI/PreferencesUI.py:2931
msgid "Selection limit"
msgstr "Selection limit"

#: flatcamGUI/PreferencesUI.py:1431
msgid ""
"Set the number of selected Gerber geometry\n"
"items above which the utility geometry\n"
"becomes just a selection rectangle.\n"
"Increases the performance when moving a\n"
"large number of geometric elements."
msgstr ""
"Set the number of selected Gerber geometry\n"
"items above which the utility geometry\n"
"becomes just a selection rectangle.\n"
"Increases the performance when moving a\n"
"large number of geometric elements."

#: flatcamGUI/PreferencesUI.py:1443
msgid "New Aperture code"
msgstr "New Aperture code"

#: flatcamGUI/PreferencesUI.py:1455
msgid "New Aperture size"
msgstr "New Aperture size"

#: flatcamGUI/PreferencesUI.py:1457
msgid "Size for the new aperture"
msgstr "Size for the new aperture"

#: flatcamGUI/PreferencesUI.py:1467
msgid "New Aperture type"
msgstr "New Aperture type"

#: flatcamGUI/PreferencesUI.py:1469
msgid ""
"Type for the new aperture.\n"
"Can be 'C', 'R' or 'O'."
msgstr ""
"Type for the new aperture.\n"
"Can be 'C', 'R' or 'O'."

#: flatcamGUI/PreferencesUI.py:1490
msgid "Aperture Dimensions"
msgstr "Aperture Dimensions"

#: flatcamGUI/PreferencesUI.py:1492 flatcamGUI/PreferencesUI.py:2603
#: flatcamGUI/PreferencesUI.py:3275
msgid "Diameters of the cutting tools, separated by ','"
msgstr "Diameters of the cutting tools, separated by ','"

#: flatcamGUI/PreferencesUI.py:1498
msgid "Linear Pad Array"
msgstr "Linear Pad Array"

#: flatcamGUI/PreferencesUI.py:1502 flatcamGUI/PreferencesUI.py:2369
#: flatcamGUI/PreferencesUI.py:2500
msgid "Linear Dir."
msgstr "Linear Dir."

#: flatcamGUI/PreferencesUI.py:1538
msgid "Circular Pad Array"
msgstr "Circular Pad Array"

#: flatcamGUI/PreferencesUI.py:1542 flatcamGUI/PreferencesUI.py:2409
#: flatcamGUI/PreferencesUI.py:2540
msgid "Circular Dir."
msgstr "Circular Dir."

#: flatcamGUI/PreferencesUI.py:1544 flatcamGUI/PreferencesUI.py:2411
#: flatcamGUI/PreferencesUI.py:2542
msgid ""
"Direction for circular array.\n"
"Can be CW = clockwise or CCW = counter clockwise."
msgstr ""
"Direction for circular array.\n"
"Can be CW = clockwise or CCW = counter clockwise."

#: flatcamGUI/PreferencesUI.py:1555 flatcamGUI/PreferencesUI.py:2422
#: flatcamGUI/PreferencesUI.py:2553
msgid "Circ. Angle"
msgstr "Circ. Angle"

#: flatcamGUI/PreferencesUI.py:1570
msgid "Distance at which to buffer the Gerber element."
msgstr "Distance at which to buffer the Gerber element."

#: flatcamGUI/PreferencesUI.py:1577
msgid "Scale Tool"
msgstr "Scale Tool"

#: flatcamGUI/PreferencesUI.py:1583
msgid "Factor to scale the Gerber element."
msgstr "Factor to scale the Gerber element."

#: flatcamGUI/PreferencesUI.py:1594 flatcamGUI/PreferencesUI.py:1604
msgid "Threshold low"
msgstr "Threshold low"

#: flatcamGUI/PreferencesUI.py:1596
msgid "Threshold value under which the apertures are not marked."
msgstr "Threshold value under which the apertures are not marked."

#: flatcamGUI/PreferencesUI.py:1606
msgid "Threshold value over which the apertures are not marked."
msgstr "Threshold value over which the apertures are not marked."

#: flatcamGUI/PreferencesUI.py:1622
msgid "Excellon General"
msgstr "Excellon General"

#: flatcamGUI/PreferencesUI.py:1644
msgid "Excellon Format"
msgstr "Excellon Format"

#: flatcamGUI/PreferencesUI.py:1646
msgid ""
"The NC drill files, usually named Excellon files\n"
"are files that can be found in different formats.\n"
"Here we set the format used when the provided\n"
"coordinates are not using period.\n"
"\n"
"Possible presets:\n"
"\n"
"PROTEUS 3:3 MM LZ\n"
"DipTrace 5:2 MM TZ\n"
"DipTrace 4:3 MM LZ\n"
"\n"
"EAGLE 3:3 MM TZ\n"
"EAGLE 4:3 MM TZ\n"
"EAGLE 2:5 INCH TZ\n"
"EAGLE 3:5 INCH TZ\n"
"\n"
"ALTIUM 2:4 INCH LZ\n"
"Sprint Layout 2:4 INCH LZ\n"
"KiCAD 3:5 INCH TZ"
msgstr ""
"The NC drill files, usually named Excellon files\n"
"are files that can be found in different formats.\n"
"Here we set the format used when the provided\n"
"coordinates are not using period.\n"
"\n"
"Possible presets:\n"
"\n"
"PROTEUS 3:3 MM LZ\n"
"DipTrace 5:2 MM TZ\n"
"DipTrace 4:3 MM LZ\n"
"\n"
"EAGLE 3:3 MM TZ\n"
"EAGLE 4:3 MM TZ\n"
"EAGLE 2:5 INCH TZ\n"
"EAGLE 3:5 INCH TZ\n"
"\n"
"ALTIUM 2:4 INCH LZ\n"
"Sprint Layout 2:4 INCH LZ\n"
"KiCAD 3:5 INCH TZ"

#: flatcamGUI/PreferencesUI.py:1674
msgid "Default values for INCH are 2:4"
msgstr "Default values for INCH are 2:4"

#: flatcamGUI/PreferencesUI.py:1682 flatcamGUI/PreferencesUI.py:1715
#: flatcamGUI/PreferencesUI.py:2208
msgid ""
"This numbers signify the number of digits in\n"
"the whole part of Excellon coordinates."
msgstr ""
"This numbers signify the number of digits in\n"
"the whole part of Excellon coordinates."

#: flatcamGUI/PreferencesUI.py:1696 flatcamGUI/PreferencesUI.py:1729
#: flatcamGUI/PreferencesUI.py:2222
msgid ""
"This numbers signify the number of digits in\n"
"the decimal part of Excellon coordinates."
msgstr ""
"This numbers signify the number of digits in\n"
"the decimal part of Excellon coordinates."

#: flatcamGUI/PreferencesUI.py:1704
msgid "METRIC"
msgstr "METRIC"

#: flatcamGUI/PreferencesUI.py:1707
msgid "Default values for METRIC are 3:3"
msgstr "Default values for METRIC are 3:3"

#: flatcamGUI/PreferencesUI.py:1738
msgid "Default <b>Zeros</b>"
msgstr "Default <b>Zeros</b>"

#: flatcamGUI/PreferencesUI.py:1741 flatcamGUI/PreferencesUI.py:2257
msgid ""
"This sets the type of Excellon zeros.\n"
"If LZ then Leading Zeros are kept and\n"
"Trailing Zeros are removed.\n"
"If TZ is checked then Trailing Zeros are kept\n"
"and Leading Zeros are removed."
msgstr ""
"This sets the type of Excellon zeros.\n"
"If LZ then Leading Zeros are kept and\n"
"Trailing Zeros are removed.\n"
"If TZ is checked then Trailing Zeros are kept\n"
"and Leading Zeros are removed."

#: flatcamGUI/PreferencesUI.py:1752
msgid ""
"This sets the default type of Excellon zeros.\n"
"If it is not detected in the parsed file the value here\n"
"will be used.If LZ then Leading Zeros are kept and\n"
"Trailing Zeros are removed.\n"
"If TZ is checked then Trailing Zeros are kept\n"
"and Leading Zeros are removed."
msgstr ""
"This sets the default type of Excellon zeros.\n"
"If it is not detected in the parsed file the value here\n"
"will be used.If LZ then Leading Zeros are kept and\n"
"Trailing Zeros are removed.\n"
"If TZ is checked then Trailing Zeros are kept\n"
"and Leading Zeros are removed."

#: flatcamGUI/PreferencesUI.py:1762
msgid "Default <b>Units</b>"
msgstr "Default <b>Units</b>"

#: flatcamGUI/PreferencesUI.py:1765
msgid ""
"This sets the default units of Excellon files.\n"
"If it is not detected in the parsed file the value here\n"
"will be used.Some Excellon files don't have an header\n"
"therefore this parameter will be used."
msgstr ""
"This sets the default units of Excellon files.\n"
"If it is not detected in the parsed file the value here\n"
"will be used.Some Excellon files don't have an header\n"
"therefore this parameter will be used."

#: flatcamGUI/PreferencesUI.py:1776
msgid ""
"This sets the units of Excellon files.\n"
"Some Excellon files don't have an header\n"
"therefore this parameter will be used."
msgstr ""
"This sets the units of Excellon files.\n"
"Some Excellon files don't have an header\n"
"therefore this parameter will be used."

#: flatcamGUI/PreferencesUI.py:1782
msgid "Update Export settings"
msgstr "Update Export settings"

#: flatcamGUI/PreferencesUI.py:1790
msgid "Excellon Optimization"
msgstr "Excellon Optimization"

#: flatcamGUI/PreferencesUI.py:1793
#| msgid "Algorithm:   "
msgid "Algorithm:"
msgstr "Algorithm:"

#: flatcamGUI/PreferencesUI.py:1795 flatcamGUI/PreferencesUI.py:1812
#| msgid ""
#| "This sets the optimization type for the Excellon drill path.\n"
#| "If MH is checked then Google OR-Tools algorithm with MetaHeuristic\n"
#| "Guided Local Path is used. Default search time is 3sec.\n"
#| "Use set_sys excellon_search_time value Tcl Command to set other values.\n"
#| "If Basic is checked then Google OR-Tools Basic algorithm is used.\n"
#| "\n"
#| "If DISABLED, then FlatCAM works in 32bit mode and it uses \n"
#| "Travelling Salesman algorithm for path optimization."
msgid ""
"This sets the optimization type for the Excellon drill path.\n"
"If <<MetaHeuristic>> is checked then Google OR-Tools algorithm with\n"
"MetaHeuristic Guided Local Path is used. Default search time is 3sec.\n"
"If <<Basic>> is checked then Google OR-Tools Basic algorithm is used.\n"
"If <<TSA>> is checked then Travelling Salesman algorithm is used for\n"
"drill path optimization.\n"
"\n"
"If this control is disabled, then FlatCAM works in 32bit mode and it uses\n"
"Travelling Salesman algorithm for path optimization."
msgstr ""
"This sets the optimization type for the Excellon drill path.\n"
"If <<MetaHeuristic>> is checked then Google OR-Tools algorithm with\n"
"MetaHeuristic Guided Local Path is used. Default search time is 3sec.\n"
"If <<Basic>> is checked then Google OR-Tools Basic algorithm is used.\n"
"If <<TSA>> is checked then Travelling Salesman algorithm is used for\n"
"drill path optimization.\n"
"\n"
"If this control is disabled, then FlatCAM works in 32bit mode and it uses\n"
"Travelling Salesman algorithm for path optimization."

#: flatcamGUI/PreferencesUI.py:1807
msgid "MetaHeuristic"
msgstr "MetaHeuristic"

#: flatcamGUI/PreferencesUI.py:1809
msgid "TSA"
msgstr "TSA"

#: flatcamGUI/PreferencesUI.py:1824
msgid "Optimization Time"
msgstr "Optimization Time"

#: flatcamGUI/PreferencesUI.py:1827
msgid ""
"When OR-Tools Metaheuristic (MH) is enabled there is a\n"
"maximum threshold for how much time is spent doing the\n"
"path optimization. This max duration is set here.\n"
"In seconds."
msgstr ""
"When OR-Tools Metaheuristic (MH) is enabled there is a\n"
"maximum threshold for how much time is spent doing the\n"
"path optimization. This max duration is set here.\n"
"In seconds."

#: flatcamGUI/PreferencesUI.py:1870
msgid "Excellon Options"
msgstr "Excellon Options"

#: flatcamGUI/PreferencesUI.py:1875
msgid ""
"Parameters used to create a CNC Job object\n"
"for this drill object."
msgstr ""
"Parameters used to create a CNC Job object\n"
"for this drill object."

#: flatcamGUI/PreferencesUI.py:1913 flatcamGUI/PreferencesUI.py:2694
msgid "Toolchange Z"
msgstr "Toolchange Z"

#: flatcamGUI/PreferencesUI.py:1945
msgid "Spindle Speed"
msgstr "Spindle Speed"

#: flatcamGUI/PreferencesUI.py:1960 flatcamGUI/PreferencesUI.py:2755
msgid "Duration"
msgstr "Duration"

#: flatcamGUI/PreferencesUI.py:1988
msgid ""
"Choose what to use for GCode generation:\n"
"'Drills', 'Slots' or 'Both'.\n"
"When choosing 'Slots' or 'Both', slots will be\n"
"converted to drills."
msgstr ""
"Choose what to use for GCode generation:\n"
"'Drills', 'Slots' or 'Both'.\n"
"When choosing 'Slots' or 'Both', slots will be\n"
"converted to drills."

#: flatcamGUI/PreferencesUI.py:2031
msgid "Defaults"
msgstr "Defaults"

#: flatcamGUI/PreferencesUI.py:2044
msgid "Excellon Adv. Options"
msgstr "Excellon Adv. Options"

#: flatcamGUI/PreferencesUI.py:2052
#| msgid ""
#| "A list of Gerber advanced parameters.\n"
#| "Those parameters are available only for\n"
#| "Advanced App. Level."
msgid ""
"A list of Excellon advanced parameters.\n"
"Those parameters are available only for\n"
"Advanced App. Level."
msgstr ""
"A list of Excellon advanced parameters.\n"
"Those parameters are available only for\n"
"Advanced App. Level."

#: flatcamGUI/PreferencesUI.py:2070
msgid "Toolchange X,Y"
msgstr "Toolchange X,Y"

#: flatcamGUI/PreferencesUI.py:2072 flatcamGUI/PreferencesUI.py:2804
msgid "Toolchange X,Y position."
msgstr "Toolchange X,Y position."

#: flatcamGUI/PreferencesUI.py:2120 flatcamGUI/PreferencesUI.py:2863
msgid "Spindle dir."
msgstr "Spindle dir."

#: flatcamGUI/PreferencesUI.py:2122 flatcamGUI/PreferencesUI.py:2865
msgid ""
"This sets the direction that the spindle is rotating.\n"
"It can be either:\n"
"- CW = clockwise or\n"
"- CCW = counter clockwise"
msgstr ""
"This sets the direction that the spindle is rotating.\n"
"It can be either:\n"
"- CW = clockwise or\n"
"- CCW = counter clockwise"

#: flatcamGUI/PreferencesUI.py:2133 flatcamGUI/PreferencesUI.py:2877
msgid "Fast Plunge"
msgstr "Fast Plunge"

#: flatcamGUI/PreferencesUI.py:2135 flatcamGUI/PreferencesUI.py:2879
msgid ""
"By checking this, the vertical move from\n"
"Z_Toolchange to Z_move is done with G0,\n"
"meaning the fastest speed available.\n"
"WARNING: the move is done at Toolchange X,Y coords."
msgstr ""
"By checking this, the vertical move from\n"
"Z_Toolchange to Z_move is done with G0,\n"
"meaning the fastest speed available.\n"
"WARNING: the move is done at Toolchange X,Y coords."

#: flatcamGUI/PreferencesUI.py:2144
msgid "Fast Retract"
msgstr "Fast Retract"

#: flatcamGUI/PreferencesUI.py:2146
msgid ""
"Exit hole strategy.\n"
" - When uncheked, while exiting the drilled hole the drill bit\n"
"will travel slow, with set feedrate (G1), up to zero depth and then\n"
"travel as fast as possible (G0) to the Z Move (travel height).\n"
" - When checked the travel from Z cut (cut depth) to Z_move\n"
"(travel height) is done as fast as possible (G0) in one move."
msgstr ""
"Exit hole strategy.\n"
" - When uncheked, while exiting the drilled hole the drill bit\n"
"will travel slow, with set feedrate (G1), up to zero depth and then\n"
"travel as fast as possible (G0) to the Z Move (travel height).\n"
" - When checked the travel from Z cut (cut depth) to Z_move\n"
"(travel height) is done as fast as possible (G0) in one move."

#: flatcamGUI/PreferencesUI.py:2165
msgid "Excellon Export"
msgstr "Excellon Export"

#: flatcamGUI/PreferencesUI.py:2170
msgid ""
"The parameters set here are used in the file exported\n"
"when using the File -> Export -> Export Excellon menu entry."
msgstr ""
"The parameters set here are used in the file exported\n"
"when using the File -> Export -> Export Excellon menu entry."

#: flatcamGUI/PreferencesUI.py:2181 flatcamGUI/PreferencesUI.py:2187
msgid "The units used in the Excellon file."
msgstr "The units used in the Excellon file."

#: flatcamGUI/PreferencesUI.py:2195
msgid ""
"The NC drill files, usually named Excellon files\n"
"are files that can be found in different formats.\n"
"Here we set the format used when the provided\n"
"coordinates are not using period."
msgstr ""
"The NC drill files, usually named Excellon files\n"
"are files that can be found in different formats.\n"
"Here we set the format used when the provided\n"
"coordinates are not using period."

#: flatcamGUI/PreferencesUI.py:2231
msgid "Format"
msgstr "Format"

#: flatcamGUI/PreferencesUI.py:2233 flatcamGUI/PreferencesUI.py:2243
msgid ""
"Select the kind of coordinates format used.\n"
"Coordinates can be saved with decimal point or without.\n"
"When there is no decimal point, it is required to specify\n"
"the number of digits for integer part and the number of decimals.\n"
"Also it will have to be specified if LZ = leading zeros are kept\n"
"or TZ = trailing zeros are kept."
msgstr ""
"Select the kind of coordinates format used.\n"
"Coordinates can be saved with decimal point or without.\n"
"When there is no decimal point, it is required to specify\n"
"the number of digits for integer part and the number of decimals.\n"
"Also it will have to be specified if LZ = leading zeros are kept\n"
"or TZ = trailing zeros are kept."

#: flatcamGUI/PreferencesUI.py:2240
msgid "Decimal"
msgstr "Decimal"

#: flatcamGUI/PreferencesUI.py:2241
msgid "No-Decimal"
msgstr "No-Decimal"

#: flatcamGUI/PreferencesUI.py:2267
msgid ""
"This sets the default type of Excellon zeros.\n"
"If LZ then Leading Zeros are kept and\n"
"Trailing Zeros are removed.\n"
"If TZ is checked then Trailing Zeros are kept\n"
"and Leading Zeros are removed."
msgstr ""
"This sets the default type of Excellon zeros.\n"
"If LZ then Leading Zeros are kept and\n"
"Trailing Zeros are removed.\n"
"If TZ is checked then Trailing Zeros are kept\n"
"and Leading Zeros are removed."

#: flatcamGUI/PreferencesUI.py:2277
msgid "Slot type"
msgstr "Slot type"

#: flatcamGUI/PreferencesUI.py:2280 flatcamGUI/PreferencesUI.py:2290
msgid ""
"This sets how the slots will be exported.\n"
"If ROUTED then the slots will be routed\n"
"using M15/M16 commands.\n"
"If DRILLED(G85) the slots will be exported\n"
"using the Drilled slot command (G85)."
msgstr ""
"This sets how the slots will be exported.\n"
"If ROUTED then the slots will be routed\n"
"using M15/M16 commands.\n"
"If DRILLED(G85) the slots will be exported\n"
"using the Drilled slot command (G85)."

#: flatcamGUI/PreferencesUI.py:2287
msgid "Routed"
msgstr "Routed"

#: flatcamGUI/PreferencesUI.py:2288
msgid "Drilled(G85)"
msgstr "Drilled(G85)"

#: flatcamGUI/PreferencesUI.py:2320
msgid "A list of Excellon Editor parameters."
msgstr "A list of Excellon Editor parameters."

#: flatcamGUI/PreferencesUI.py:2330
msgid ""
"Set the number of selected Excellon geometry\n"
"items above which the utility geometry\n"
"becomes just a selection rectangle.\n"
"Increases the performance when moving a\n"
"large number of geometric elements."
msgstr ""
"Set the number of selected Excellon geometry\n"
"items above which the utility geometry\n"
"becomes just a selection rectangle.\n"
"Increases the performance when moving a\n"
"large number of geometric elements."

#: flatcamGUI/PreferencesUI.py:2342
msgid "New Tool Dia"
msgstr "New Tool Dia"

#: flatcamGUI/PreferencesUI.py:2365
msgid "Linear Drill Array"
msgstr "Linear Drill Array"

#: flatcamGUI/PreferencesUI.py:2405
msgid "Circular Drill Array"
msgstr "Circular Drill Array"

#: flatcamGUI/PreferencesUI.py:2484
msgid "Linear Slot Array"
msgstr "Linear Slot Array"

#: flatcamGUI/PreferencesUI.py:2536
msgid "Circular Slot Array"
msgstr "Circular Slot Array"

#: flatcamGUI/PreferencesUI.py:2570
msgid "Geometry General"
msgstr "Geometry General"

#: flatcamGUI/PreferencesUI.py:2589
msgid ""
"The number of circle steps for <b>Geometry</b> \n"
"circle and arc shapes linear approximation."
msgstr ""
"The number of circle steps for <b>Geometry</b> \n"
"circle and arc shapes linear approximation."

#: flatcamGUI/PreferencesUI.py:2617
msgid "Geometry Options"
msgstr "Geometry Options"

#: flatcamGUI/PreferencesUI.py:2624
msgid ""
"Create a CNC Job object\n"
"tracing the contours of this\n"
"Geometry object."
msgstr ""
"Create a CNC Job object\n"
"tracing the contours of this\n"
"Geometry object."

#: flatcamGUI/PreferencesUI.py:2656
msgid "Depth/Pass"
msgstr "Depth/Pass"

#: flatcamGUI/PreferencesUI.py:2658
msgid ""
"The depth to cut on each pass,\n"
"when multidepth is enabled.\n"
"It has positive value although\n"
"it is a fraction from the depth\n"
"which has negative value."
msgstr ""
"The depth to cut on each pass,\n"
"when multidepth is enabled.\n"
"It has positive value although\n"
"it is a fraction from the depth\n"
"which has negative value."

#: flatcamGUI/PreferencesUI.py:2785
msgid "Geometry Adv. Options"
msgstr "Geometry Adv. Options"

#: flatcamGUI/PreferencesUI.py:2792
#| msgid ""
#| "A list of Gerber advanced parameters.\n"
#| "Those parameters are available only for\n"
#| "Advanced App. Level."
msgid ""
"A list of Geometry advanced parameters.\n"
"Those parameters are available only for\n"
"Advanced App. Level."
msgstr ""
"A list of Geometry advanced parameters.\n"
"Those parameters are available only for\n"
"Advanced App. Level."

#: flatcamGUI/PreferencesUI.py:2802 flatcamGUI/PreferencesUI.py:4320
#: flatcamTools/ToolSolderPaste.py:207
msgid "Toolchange X-Y"
msgstr "Toolchange X-Y"

#: flatcamGUI/PreferencesUI.py:2813
msgid ""
"Height of the tool just after starting the work.\n"
"Delete the value if you don't need this feature."
msgstr ""
"Height of the tool just after starting the work.\n"
"Delete the value if you don't need this feature."

#: flatcamGUI/PreferencesUI.py:2889
msgid "Seg. X size"
msgstr "Seg. X size"

#: flatcamGUI/PreferencesUI.py:2891
msgid ""
"The size of the trace segment on the X axis.\n"
"Useful for auto-leveling.\n"
"A value of 0 means no segmentation on the X axis."
msgstr ""
"The size of the trace segment on the X axis.\n"
"Useful for auto-leveling.\n"
"A value of 0 means no segmentation on the X axis."

#: flatcamGUI/PreferencesUI.py:2900
msgid "Seg. Y size"
msgstr "Seg. Y size"

#: flatcamGUI/PreferencesUI.py:2902
msgid ""
"The size of the trace segment on the Y axis.\n"
"Useful for auto-leveling.\n"
"A value of 0 means no segmentation on the Y axis."
msgstr ""
"The size of the trace segment on the Y axis.\n"
"Useful for auto-leveling.\n"
"A value of 0 means no segmentation on the Y axis."

#: flatcamGUI/PreferencesUI.py:2918
msgid "Geometry Editor"
msgstr "Geometry Editor"

#: flatcamGUI/PreferencesUI.py:2923
msgid "A list of Geometry Editor parameters."
msgstr "A list of Geometry Editor parameters."

#: flatcamGUI/PreferencesUI.py:2933
msgid ""
"Set the number of selected geometry\n"
"items above which the utility geometry\n"
"becomes just a selection rectangle.\n"
"Increases the performance when moving a\n"
"large number of geometric elements."
msgstr ""
"Set the number of selected geometry\n"
"items above which the utility geometry\n"
"becomes just a selection rectangle.\n"
"Increases the performance when moving a\n"
"large number of geometric elements."

#: flatcamGUI/PreferencesUI.py:2952
msgid "CNC Job General"
msgstr "CNC Job General"

#: flatcamGUI/PreferencesUI.py:3007
msgid ""
"The number of circle steps for <b>GCode</b> \n"
"circle and arc shapes linear approximation."
msgstr ""
"The number of circle steps for <b>GCode</b> \n"
"circle and arc shapes linear approximation."

#: flatcamGUI/PreferencesUI.py:3015
msgid "Travel dia"
msgstr "Travel dia"

#: flatcamGUI/PreferencesUI.py:3017
msgid ""
"The width of the travel lines to be\n"
"rendered in the plot."
msgstr ""
"The width of the travel lines to be\n"
"rendered in the plot."

#: flatcamGUI/PreferencesUI.py:3028
msgid "Coordinates decimals"
msgstr "Coordinates decimals"

#: flatcamGUI/PreferencesUI.py:3030
msgid ""
"The number of decimals to be used for \n"
"the X, Y, Z coordinates in CNC code (GCODE, etc.)"
msgstr ""
"The number of decimals to be used for \n"
"the X, Y, Z coordinates in CNC code (GCODE, etc.)"

#: flatcamGUI/PreferencesUI.py:3038
msgid "Feedrate decimals"
msgstr "Feedrate decimals"

#: flatcamGUI/PreferencesUI.py:3040
msgid ""
"The number of decimals to be used for \n"
"the Feedrate parameter in CNC code (GCODE, etc.)"
msgstr ""
"The number of decimals to be used for \n"
"the Feedrate parameter in CNC code (GCODE, etc.)"

#: flatcamGUI/PreferencesUI.py:3048
msgid "Coordinates type"
msgstr "Coordinates type"

#: flatcamGUI/PreferencesUI.py:3050
msgid ""
"The type of coordinates to be used in Gcode.\n"
"Can be:\n"
"- Absolute G90 -> the reference is the origin x=0, y=0\n"
"- Incremental G91 -> the reference is the previous position"
msgstr ""
"The type of coordinates to be used in Gcode.\n"
"Can be:\n"
"- Absolute G90 -> the reference is the origin x=0, y=0\n"
"- Incremental G91 -> the reference is the previous position"

#: flatcamGUI/PreferencesUI.py:3056
msgid "Absolute G90"
msgstr "Absolute G90"

#: flatcamGUI/PreferencesUI.py:3057
msgid "Incremental G91"
msgstr "Incremental G91"

#: flatcamGUI/PreferencesUI.py:3074
msgid "CNC Job Options"
msgstr "CNC Job Options"

#: flatcamGUI/PreferencesUI.py:3077
msgid "Export G-Code"
msgstr "Export G-Code"

#: flatcamGUI/PreferencesUI.py:3093
msgid "Prepend to G-Code"
msgstr "Prepend to G-Code"

#: flatcamGUI/PreferencesUI.py:3105
msgid "Append to G-Code"
msgstr "Append to G-Code"

#: flatcamGUI/PreferencesUI.py:3125
msgid "CNC Job Adv. Options"
msgstr "CNC Job Adv. Options"

#: flatcamGUI/PreferencesUI.py:3198
msgid "z_cut = Z depth for the cut"
msgstr "z_cut = Z depth for the cut"

#: flatcamGUI/PreferencesUI.py:3199
msgid "z_move = Z height for travel"
msgstr "z_move = Z height for travel"

#: flatcamGUI/PreferencesUI.py:3222
msgid "Annotation Size"
msgstr "Annotation Size"

#: flatcamGUI/PreferencesUI.py:3224
msgid "The font size of the annotation text. In pixels."
msgstr "The font size of the annotation text. In pixels."

#: flatcamGUI/PreferencesUI.py:3232
msgid "Annotation Color"
msgstr "Annotation Color"

#: flatcamGUI/PreferencesUI.py:3234
msgid "Set the font color for the annotation texts."
msgstr "Set the font color for the annotation texts."

#: flatcamGUI/PreferencesUI.py:3260
msgid "NCC Tool Options"
msgstr "NCC Tool Options"

#: flatcamGUI/PreferencesUI.py:3273 flatcamGUI/PreferencesUI.py:4255
msgid "Tools dia"
msgstr "Tools dia"

#: flatcamGUI/PreferencesUI.py:3282 flatcamTools/ToolNonCopperClear.py:195
msgid "Tool Type"
msgstr "Tool Type"

#: flatcamGUI/PreferencesUI.py:3284 flatcamGUI/PreferencesUI.py:3292
#: flatcamTools/ToolNonCopperClear.py:197
#: flatcamTools/ToolNonCopperClear.py:205
msgid ""
"Default tool type:\n"
"- 'V-shape'\n"
"- Circular"
msgstr ""
"Default tool type:\n"
"- 'V-shape'\n"
"- Circular"

#: flatcamGUI/PreferencesUI.py:3289 flatcamTools/ToolNonCopperClear.py:202
msgid "V-shape"
msgstr "V-shape"

#: flatcamGUI/PreferencesUI.py:3322 flatcamGUI/PreferencesUI.py:3330
#: flatcamTools/ToolNonCopperClear.py:149
#: flatcamTools/ToolNonCopperClear.py:157
msgid ""
"Milling type when the selected tool is of type: 'iso_op':\n"
"- climb / best for precision milling and to reduce tool usage\n"
"- conventional / useful when there is no backlash compensation"
msgstr ""
"Milling type when the selected tool is of type: 'iso_op':\n"
"- climb / best for precision milling and to reduce tool usage\n"
"- conventional / useful when there is no backlash compensation"

#: flatcamGUI/PreferencesUI.py:3339 flatcamGUI/PreferencesUI.py:3703
#: flatcamTools/ToolNonCopperClear.py:163 flatcamTools/ToolPaint.py:136
msgid "Tool order"
msgstr "Tool order"

#: flatcamGUI/PreferencesUI.py:3340 flatcamGUI/PreferencesUI.py:3350
#: flatcamGUI/PreferencesUI.py:3704 flatcamGUI/PreferencesUI.py:3714
#: flatcamTools/ToolNonCopperClear.py:164
#: flatcamTools/ToolNonCopperClear.py:174 flatcamTools/ToolPaint.py:137
#: flatcamTools/ToolPaint.py:147
msgid ""
"This set the way that the tools in the tools table are used.\n"
"'No' --> means that the used order is the one in the tool table\n"
"'Forward' --> means that the tools will be ordered from small to big\n"
"'Reverse' --> menas that the tools will ordered from big to small\n"
"\n"
"WARNING: using rest machining will automatically set the order\n"
"in reverse and disable this control."
msgstr ""
"This set the way that the tools in the tools table are used.\n"
"'No' --> means that the used order is the one in the tool table\n"
"'Forward' --> means that the tools will be ordered from small to big\n"
"'Reverse' --> menas that the tools will ordered from big to small\n"
"\n"
"WARNING: using rest machining will automatically set the order\n"
"in reverse and disable this control."

#: flatcamGUI/PreferencesUI.py:3348 flatcamGUI/PreferencesUI.py:3712
#: flatcamTools/ToolNonCopperClear.py:172 flatcamTools/ToolPaint.py:145
msgid "Forward"
msgstr "Forward"

#: flatcamGUI/PreferencesUI.py:3349 flatcamGUI/PreferencesUI.py:3713
#: flatcamTools/ToolNonCopperClear.py:173 flatcamTools/ToolPaint.py:146
msgid "Reverse"
msgstr "Reverse"

#: flatcamGUI/PreferencesUI.py:3362 flatcamGUI/PreferencesUI.py:3367
#: flatcamTools/ToolNonCopperClear.py:271
#: flatcamTools/ToolNonCopperClear.py:276
msgid ""
"Depth of cut into material. Negative value.\n"
"In FlatCAM units."
msgstr ""
"Depth of cut into material. Negative value.\n"
"In FlatCAM units."

#: flatcamGUI/PreferencesUI.py:3377 flatcamTools/ToolNonCopperClear.py:285
#, python-format
msgid ""
"How much (fraction) of the tool width to overlap each tool pass.\n"
"Example:\n"
"A value here of 0.25 means 25%% from the tool diameter found above.\n"
"\n"
"Adjust the value starting with lower values\n"
"and increasing it if areas that should be cleared are still \n"
"not cleared.\n"
"Lower values = faster processing, faster execution on PCB.\n"
"Higher values = slow processing and slow execution on CNC\n"
"due of too many paths."
msgstr ""
"How much (fraction) of the tool width to overlap each tool pass.\n"
"Example:\n"
"A value here of 0.25 means 25%% from the tool diameter found above.\n"
"\n"
"Adjust the value starting with lower values\n"
"and increasing it if areas that should be cleared are still \n"
"not cleared.\n"
"Lower values = faster processing, faster execution on PCB.\n"
"Higher values = slow processing and slow execution on CNC\n"
"due of too many paths."

#: flatcamGUI/PreferencesUI.py:3398 flatcamTools/ToolNonCopperClear.py:305
msgid "Bounding box margin."
msgstr "Bounding box margin."

#: flatcamGUI/PreferencesUI.py:3407 flatcamGUI/PreferencesUI.py:3758
#: flatcamTools/ToolNonCopperClear.py:314
msgid ""
"Algorithm for non-copper clearing:<BR><B>Standard</B>: Fixed step inwards."
"<BR><B>Seed-based</B>: Outwards from seed.<BR><B>Line-based</B>: Parallel "
"lines."
msgstr ""
"Algorithm for non-copper clearing:<BR><B>Standard</B>: Fixed step inwards."
"<BR><B>Seed-based</B>: Outwards from seed.<BR><B>Line-based</B>: Parallel "
"lines."

#: flatcamGUI/PreferencesUI.py:3421 flatcamGUI/PreferencesUI.py:3772
#: flatcamTools/ToolNonCopperClear.py:328 flatcamTools/ToolPaint.py:253
msgid "Connect"
msgstr "Connect"

#: flatcamGUI/PreferencesUI.py:3431 flatcamGUI/PreferencesUI.py:3782
#: flatcamTools/ToolNonCopperClear.py:337 flatcamTools/ToolPaint.py:262
msgid "Contour"
msgstr "Contour"

#: flatcamGUI/PreferencesUI.py:3441 flatcamTools/ToolNonCopperClear.py:346
#: flatcamTools/ToolPaint.py:271
msgid "Rest M."
msgstr "Rest M."

#: flatcamGUI/PreferencesUI.py:3443 flatcamTools/ToolNonCopperClear.py:348
msgid ""
"If checked, use 'rest machining'.\n"
"Basically it will clear copper outside PCB features,\n"
"using the biggest tool and continue with the next tools,\n"
"from bigger to smaller, to clear areas of copper that\n"
"could not be cleared by previous tool, until there is\n"
"no more copper to clear or there are no more tools.\n"
"If not checked, use the standard algorithm."
msgstr ""
"If checked, use 'rest machining'.\n"
"Basically it will clear copper outside PCB features,\n"
"using the biggest tool and continue with the next tools,\n"
"from bigger to smaller, to clear areas of copper that\n"
"could not be cleared by previous tool, until there is\n"
"no more copper to clear or there are no more tools.\n"
"If not checked, use the standard algorithm."

#: flatcamGUI/PreferencesUI.py:3458 flatcamGUI/PreferencesUI.py:3470
#: flatcamTools/ToolNonCopperClear.py:363
#: flatcamTools/ToolNonCopperClear.py:375
msgid ""
"If used, it will add an offset to the copper features.\n"
"The copper clearing will finish to a distance\n"
"from the copper features.\n"
"The value can be between 0 and 10 FlatCAM units."
msgstr ""
"If used, it will add an offset to the copper features.\n"
"The copper clearing will finish to a distance\n"
"from the copper features.\n"
"The value can be between 0 and 10 FlatCAM units."

#: flatcamGUI/PreferencesUI.py:3468 flatcamTools/ToolNonCopperClear.py:373
msgid "Offset value"
msgstr "Offset value"

#: flatcamGUI/PreferencesUI.py:3485 flatcamTools/ToolNonCopperClear.py:399
msgid "Itself"
msgstr "Itself"

#: flatcamGUI/PreferencesUI.py:3486 flatcamGUI/PreferencesUI.py:3803
msgid "Area"
msgstr "Area"

#: flatcamGUI/PreferencesUI.py:3487
msgid "Ref"
msgstr "Ref"

#: flatcamGUI/PreferencesUI.py:3488
msgid "Reference"
msgstr "Reference"

#: flatcamGUI/PreferencesUI.py:3490 flatcamTools/ToolNonCopperClear.py:405
msgid ""
"- 'Itself' -  the non copper clearing extent\n"
"is based on the object that is copper cleared.\n"
" - 'Area Selection' - left mouse click to start selection of the area to be "
"painted.\n"
"Keeping a modifier key pressed (CTRL or SHIFT) will allow to add multiple "
"areas.\n"
"- 'Reference Object' -  will do non copper clearing within the area\n"
"specified by another object."
msgstr ""
"- 'Itself' -  the non copper clearing extent\n"
"is based on the object that is copper cleared.\n"
" - 'Area Selection' - left mouse click to start selection of the area to be "
"painted.\n"
"Keeping a modifier key pressed (CTRL or SHIFT) will allow to add multiple "
"areas.\n"
"- 'Reference Object' -  will do non copper clearing within the area\n"
"specified by another object."

#: flatcamGUI/PreferencesUI.py:3501 flatcamGUI/PreferencesUI.py:3811
msgid "Normal"
msgstr "Normal"

#: flatcamGUI/PreferencesUI.py:3502 flatcamGUI/PreferencesUI.py:3812
msgid "Progressive"
msgstr "Progressive"

#: flatcamGUI/PreferencesUI.py:3503
msgid "NCC Plotting"
msgstr "NCC Plotting"

#: flatcamGUI/PreferencesUI.py:3505
msgid ""
"- 'Normal' -  normal plotting, done at the end of the NCC job\n"
"- 'Progressive' - after each shape is generated it will be plotted."
msgstr ""
"- 'Normal' -  normal plotting, done at the end of the NCC job\n"
"- 'Progressive' - after each shape is generated it will be plotted."

#: flatcamGUI/PreferencesUI.py:3519
msgid "Cutout Tool Options"
msgstr "Cutout Tool Options"

#: flatcamGUI/PreferencesUI.py:3535 flatcamTools/ToolCutOut.py:93
msgid ""
"Diameter of the tool used to cutout\n"
"the PCB shape out of the surrounding material."
msgstr ""
"Diameter of the tool used to cutout\n"
"the PCB shape out of the surrounding material."

#: flatcamGUI/PreferencesUI.py:3543 flatcamTools/ToolCutOut.py:76
msgid "Obj kind"
msgstr "Obj kind"

#: flatcamGUI/PreferencesUI.py:3545 flatcamTools/ToolCutOut.py:78
msgid ""
"Choice of what kind the object we want to cutout is.<BR>- <B>Single</B>: "
"contain a single PCB Gerber outline object.<BR>- <B>Panel</B>: a panel PCB "
"Gerber object, which is made\n"
"out of many individual PCB outlines."
msgstr ""
"Choice of what kind the object we want to cutout is.<BR>- <B>Single</B>: "
"contain a single PCB Gerber outline object.<BR>- <B>Panel</B>: a panel PCB "
"Gerber object, which is made\n"
"out of many individual PCB outlines."

#: flatcamGUI/PreferencesUI.py:3552 flatcamGUI/PreferencesUI.py:3802
#: flatcamTools/ToolCutOut.py:84
msgid "Single"
msgstr "Single"

#: flatcamGUI/PreferencesUI.py:3553 flatcamTools/ToolCutOut.py:85
msgid "Panel"
msgstr "Panel"

#: flatcamGUI/PreferencesUI.py:3559 flatcamTools/ToolCutOut.py:102
msgid ""
"Margin over bounds. A positive value here\n"
"will make the cutout of the PCB further from\n"
"the actual PCB border"
msgstr ""
"Margin over bounds. A positive value here\n"
"will make the cutout of the PCB further from\n"
"the actual PCB border"

#: flatcamGUI/PreferencesUI.py:3567
msgid "Gap size"
msgstr "Gap size"

#: flatcamGUI/PreferencesUI.py:3569 flatcamTools/ToolCutOut.py:112
msgid ""
"The size of the bridge gaps in the cutout\n"
"used to keep the board connected to\n"
"the surrounding material (the one \n"
"from which the PCB is cutout)."
msgstr ""
"The size of the bridge gaps in the cutout\n"
"used to keep the board connected to\n"
"the surrounding material (the one \n"
"from which the PCB is cutout)."

#: flatcamGUI/PreferencesUI.py:3578 flatcamTools/ToolCutOut.py:148
msgid "Gaps"
msgstr "Gaps"

#: flatcamGUI/PreferencesUI.py:3580
msgid ""
"Number of gaps used for the cutout.\n"
"There can be maximum 8 bridges/gaps.\n"
"The choices are:\n"
"- None  - no gaps\n"
"- lr    - left + right\n"
"- tb    - top + bottom\n"
"- 4     - left + right +top + bottom\n"
"- 2lr   - 2*left + 2*right\n"
"- 2tb  - 2*top + 2*bottom\n"
"- 8     - 2*left + 2*right +2*top + 2*bottom"
msgstr ""
"Number of gaps used for the cutout.\n"
"There can be maximum 8 bridges/gaps.\n"
"The choices are:\n"
"- None  - no gaps\n"
"- lr    - left + right\n"
"- tb    - top + bottom\n"
"- 4     - left + right +top + bottom\n"
"- 2lr   - 2*left + 2*right\n"
"- 2tb  - 2*top + 2*bottom\n"
"- 8     - 2*left + 2*right +2*top + 2*bottom"

#: flatcamGUI/PreferencesUI.py:3602 flatcamTools/ToolCutOut.py:129
msgid "Convex Sh."
msgstr "Convex Sh."

#: flatcamGUI/PreferencesUI.py:3604 flatcamTools/ToolCutOut.py:131
msgid ""
"Create a convex shape surrounding the entire PCB.\n"
"Used only if the source object type is Gerber."
msgstr ""
"Create a convex shape surrounding the entire PCB.\n"
"Used only if the source object type is Gerber."

#: flatcamGUI/PreferencesUI.py:3618
msgid "2Sided Tool Options"
msgstr "2Sided Tool Options"

#: flatcamGUI/PreferencesUI.py:3623
msgid ""
"A tool to help in creating a double sided\n"
"PCB using alignment holes."
msgstr ""
"A tool to help in creating a double sided\n"
"PCB using alignment holes."

#: flatcamGUI/PreferencesUI.py:3633 flatcamTools/ToolDblSided.py:234
msgid "Drill dia"
msgstr "Drill dia"

#: flatcamGUI/PreferencesUI.py:3635 flatcamTools/ToolDblSided.py:225
#: flatcamTools/ToolDblSided.py:236
msgid "Diameter of the drill for the alignment holes."
msgstr "Diameter of the drill for the alignment holes."

#: flatcamGUI/PreferencesUI.py:3644 flatcamTools/ToolDblSided.py:120
msgid "Mirror Axis:"
msgstr "Mirror Axis:"

#: flatcamGUI/PreferencesUI.py:3646 flatcamTools/ToolDblSided.py:122
msgid "Mirror vertically (X) or horizontally (Y)."
msgstr "Mirror vertically (X) or horizontally (Y)."

#: flatcamGUI/PreferencesUI.py:3655 flatcamTools/ToolDblSided.py:131
msgid "Point"
msgstr "Point"

#: flatcamGUI/PreferencesUI.py:3656 flatcamTools/ToolDblSided.py:132
msgid "Box"
msgstr "Box"

#: flatcamGUI/PreferencesUI.py:3657
msgid "Axis Ref"
msgstr "Axis Ref"

#: flatcamGUI/PreferencesUI.py:3659 flatcamTools/ToolDblSided.py:135
msgid ""
"The axis should pass through a <b>point</b> or cut\n"
" a specified <b>box</b> (in a FlatCAM object) through \n"
"the center."
msgstr ""
"The axis should pass through a <b>point</b> or cut\n"
" a specified <b>box</b> (in a FlatCAM object) through \n"
"the center."

#: flatcamGUI/PreferencesUI.py:3675
msgid "Paint Tool Options"
msgstr "Paint Tool Options"

#: flatcamGUI/PreferencesUI.py:3680
msgid "<b>Parameters:</b>"
msgstr "<b>Parameters:</b>"

#: flatcamGUI/PreferencesUI.py:3792 flatcamTools/ToolPaint.py:286
msgid "Selection"
msgstr "Selection"

#: flatcamGUI/PreferencesUI.py:3794 flatcamTools/ToolPaint.py:288
#: flatcamTools/ToolPaint.py:304
msgid ""
"How to select Polygons to be painted.\n"
"\n"
"- 'Area Selection' - left mouse click to start selection of the area to be "
"painted.\n"
"Keeping a modifier key pressed (CTRL or SHIFT) will allow to add multiple "
"areas.\n"
"- 'All Polygons' - the Paint will start after click.\n"
"- 'Reference Object' -  will do non copper clearing within the area\n"
"specified by another object."
msgstr ""
"How to select Polygons to be painted.\n"
"\n"
"- 'Area Selection' - left mouse click to start selection of the area to be "
"painted.\n"
"Keeping a modifier key pressed (CTRL or SHIFT) will allow to add multiple "
"areas.\n"
"- 'All Polygons' - the Paint will start after click.\n"
"- 'Reference Object' -  will do non copper clearing within the area\n"
"specified by another object."

#: flatcamGUI/PreferencesUI.py:3805
msgid "Ref."
msgstr "Ref."

#: flatcamGUI/PreferencesUI.py:3813
msgid "Paint Plotting"
msgstr "Paint Plotting"

#: flatcamGUI/PreferencesUI.py:3815
msgid ""
"- 'Normal' -  normal plotting, done at the end of the Paint job\n"
"- 'Progressive' - after each shape is generated it will be plotted."
msgstr ""
"- 'Normal' -  normal plotting, done at the end of the Paint job\n"
"- 'Progressive' - after each shape is generated it will be plotted."

#: flatcamGUI/PreferencesUI.py:3829
msgid "Film Tool Options"
msgstr "Film Tool Options"

#: flatcamGUI/PreferencesUI.py:3834
msgid ""
"Create a PCB film from a Gerber or Geometry\n"
"FlatCAM object.\n"
"The file is saved in SVG format."
msgstr ""
"Create a PCB film from a Gerber or Geometry\n"
"FlatCAM object.\n"
"The file is saved in SVG format."

#: flatcamGUI/PreferencesUI.py:3845
msgid "Film Type"
msgstr "Film Type"

#: flatcamGUI/PreferencesUI.py:3847 flatcamTools/ToolFilm.py:118
msgid ""
"Generate a Positive black film or a Negative film.\n"
"Positive means that it will print the features\n"
"with black on a white canvas.\n"
"Negative means that it will print the features\n"
"with white on a black canvas.\n"
"The Film format is SVG."
msgstr ""
"Generate a Positive black film or a Negative film.\n"
"Positive means that it will print the features\n"
"with black on a white canvas.\n"
"Negative means that it will print the features\n"
"with white on a black canvas.\n"
"The Film format is SVG."

#: flatcamGUI/PreferencesUI.py:3858
#| msgid "Film Tool"
msgid "Film Color"
msgstr "Film Color"

#: flatcamGUI/PreferencesUI.py:3860
#| msgid "Set the color of the shape when selected."
msgid "Set the film color when positive film is selected."
msgstr "Set the film color when positive film is selected."

#: flatcamGUI/PreferencesUI.py:3878 flatcamTools/ToolFilm.py:130
msgid "Border"
msgstr "Border"

#: flatcamGUI/PreferencesUI.py:3880 flatcamTools/ToolFilm.py:132
msgid ""
"Specify a border around the object.\n"
"Only for negative film.\n"
"It helps if we use as a Box Object the same \n"
"object as in Film Object. It will create a thick\n"
"black bar around the actual print allowing for a\n"
"better delimitation of the outline features which are of\n"
"white color like the rest and which may confound with the\n"
"surroundings if not for this border."
msgstr ""
"Specify a border around the object.\n"
"Only for negative film.\n"
"It helps if we use as a Box Object the same \n"
"object as in Film Object. It will create a thick\n"
"black bar around the actual print allowing for a\n"
"better delimitation of the outline features which are of\n"
"white color like the rest and which may confound with the\n"
"surroundings if not for this border."

#: flatcamGUI/PreferencesUI.py:3893 flatcamTools/ToolFilm.py:144
msgid "Scale Stroke"
msgstr "Scale Stroke"

#: flatcamGUI/PreferencesUI.py:3895 flatcamTools/ToolFilm.py:146
msgid ""
"Scale the line stroke thickness of each feature in the SVG file.\n"
"It means that the line that envelope each SVG feature will be thicker or "
"thinner,\n"
"therefore the fine features may be more affected by this parameter."
msgstr ""
"Scale the line stroke thickness of each feature in the SVG file.\n"
"It means that the line that envelope each SVG feature will be thicker or "
"thinner,\n"
"therefore the fine features may be more affected by this parameter."

#: flatcamGUI/PreferencesUI.py:3910
msgid "Panelize Tool Options"
msgstr "Panelize Tool Options"

#: flatcamGUI/PreferencesUI.py:3915
msgid ""
"Create an object that contains an array of (x, y) elements,\n"
"each element is a copy of the source object spaced\n"
"at a X distance, Y distance of each other."
msgstr ""
"Create an object that contains an array of (x, y) elements,\n"
"each element is a copy of the source object spaced\n"
"at a X distance, Y distance of each other."

#: flatcamGUI/PreferencesUI.py:3926 flatcamTools/ToolPanelize.py:147
msgid "Spacing cols"
msgstr "Spacing cols"

#: flatcamGUI/PreferencesUI.py:3928 flatcamTools/ToolPanelize.py:149
msgid ""
"Spacing between columns of the desired panel.\n"
"In current units."
msgstr ""
"Spacing between columns of the desired panel.\n"
"In current units."

#: flatcamGUI/PreferencesUI.py:3936 flatcamTools/ToolPanelize.py:156
msgid "Spacing rows"
msgstr "Spacing rows"

#: flatcamGUI/PreferencesUI.py:3938 flatcamTools/ToolPanelize.py:158
msgid ""
"Spacing between rows of the desired panel.\n"
"In current units."
msgstr ""
"Spacing between rows of the desired panel.\n"
"In current units."

#: flatcamGUI/PreferencesUI.py:3946 flatcamTools/ToolPanelize.py:165
msgid "Columns"
msgstr "Columns"

#: flatcamGUI/PreferencesUI.py:3948 flatcamTools/ToolPanelize.py:167
msgid "Number of columns of the desired panel"
msgstr "Number of columns of the desired panel"

#: flatcamGUI/PreferencesUI.py:3955 flatcamTools/ToolPanelize.py:173
msgid "Rows"
msgstr "Rows"

#: flatcamGUI/PreferencesUI.py:3957 flatcamTools/ToolPanelize.py:175
msgid "Number of rows of the desired panel"
msgstr "Number of rows of the desired panel"

#: flatcamGUI/PreferencesUI.py:3963 flatcamTools/ToolPanelize.py:181
msgid "Gerber"
msgstr "Gerber"

#: flatcamGUI/PreferencesUI.py:3964 flatcamTools/ToolPanelize.py:182
msgid "Geo"
msgstr "Geo"

#: flatcamGUI/PreferencesUI.py:3965 flatcamTools/ToolPanelize.py:183
msgid "Panel Type"
msgstr "Panel Type"

#: flatcamGUI/PreferencesUI.py:3967
msgid ""
"Choose the type of object for the panel object:\n"
"- Gerber\n"
"- Geometry"
msgstr ""
"Choose the type of object for the panel object:\n"
"- Gerber\n"
"- Geometry"

#: flatcamGUI/PreferencesUI.py:3976
msgid "Constrain within"
msgstr "Constrain within"

#: flatcamGUI/PreferencesUI.py:3978 flatcamTools/ToolPanelize.py:195
msgid ""
"Area define by DX and DY within to constrain the panel.\n"
"DX and DY values are in current units.\n"
"Regardless of how many columns and rows are desired,\n"
"the final panel will have as many columns and rows as\n"
"they fit completely within selected area."
msgstr ""
"Area define by DX and DY within to constrain the panel.\n"
"DX and DY values are in current units.\n"
"Regardless of how many columns and rows are desired,\n"
"the final panel will have as many columns and rows as\n"
"they fit completely within selected area."

#: flatcamGUI/PreferencesUI.py:3987 flatcamTools/ToolPanelize.py:204
msgid "Width (DX)"
msgstr "Width (DX)"

#: flatcamGUI/PreferencesUI.py:3989 flatcamTools/ToolPanelize.py:206
msgid ""
"The width (DX) within which the panel must fit.\n"
"In current units."
msgstr ""
"The width (DX) within which the panel must fit.\n"
"In current units."

#: flatcamGUI/PreferencesUI.py:3996 flatcamTools/ToolPanelize.py:212
msgid "Height (DY)"
msgstr "Height (DY)"

#: flatcamGUI/PreferencesUI.py:3998 flatcamTools/ToolPanelize.py:214
msgid ""
"The height (DY)within which the panel must fit.\n"
"In current units."
msgstr ""
"The height (DY)within which the panel must fit.\n"
"In current units."

#: flatcamGUI/PreferencesUI.py:4012
msgid "Calculators Tool Options"
msgstr "Calculators Tool Options"

#: flatcamGUI/PreferencesUI.py:4015 flatcamTools/ToolCalculators.py:25
msgid "V-Shape Tool Calculator"
msgstr "V-Shape Tool Calculator"

#: flatcamGUI/PreferencesUI.py:4017
msgid ""
"Calculate the tool diameter for a given V-shape tool,\n"
"having the tip diameter, tip angle and\n"
"depth-of-cut as parameters."
msgstr ""
"Calculate the tool diameter for a given V-shape tool,\n"
"having the tip diameter, tip angle and\n"
"depth-of-cut as parameters."

#: flatcamGUI/PreferencesUI.py:4028 flatcamTools/ToolCalculators.py:92
msgid "Tip Diameter"
msgstr "Tip Diameter"

#: flatcamGUI/PreferencesUI.py:4030 flatcamTools/ToolCalculators.py:97
msgid ""
"This is the tool tip diameter.\n"
"It is specified by manufacturer."
msgstr ""
"This is the tool tip diameter.\n"
"It is specified by manufacturer."

#: flatcamGUI/PreferencesUI.py:4038 flatcamTools/ToolCalculators.py:100
msgid "Tip Angle"
msgstr "Tip Angle"

#: flatcamGUI/PreferencesUI.py:4040
msgid ""
"This is the angle on the tip of the tool.\n"
"It is specified by manufacturer."
msgstr ""
"This is the angle on the tip of the tool.\n"
"It is specified by manufacturer."

#: flatcamGUI/PreferencesUI.py:4050
msgid ""
"This is depth to cut into material.\n"
"In the CNCJob object it is the CutZ parameter."
msgstr ""
"This is depth to cut into material.\n"
"In the CNCJob object it is the CutZ parameter."

#: flatcamGUI/PreferencesUI.py:4057 flatcamTools/ToolCalculators.py:27
msgid "ElectroPlating Calculator"
msgstr "ElectroPlating Calculator"

#: flatcamGUI/PreferencesUI.py:4059 flatcamTools/ToolCalculators.py:149
msgid ""
"This calculator is useful for those who plate the via/pad/drill holes,\n"
"using a method like grahite ink or calcium hypophosphite ink or palladium "
"chloride."
msgstr ""
"This calculator is useful for those who plate the via/pad/drill holes,\n"
"using a method like grahite ink or calcium hypophosphite ink or palladium "
"chloride."

#: flatcamGUI/PreferencesUI.py:4069 flatcamTools/ToolCalculators.py:158
msgid "Board Length"
msgstr "Board Length"

#: flatcamGUI/PreferencesUI.py:4071 flatcamTools/ToolCalculators.py:162
msgid "This is the board length. In centimeters."
msgstr "This is the board length. In centimeters."

#: flatcamGUI/PreferencesUI.py:4077 flatcamTools/ToolCalculators.py:164
msgid "Board Width"
msgstr "Board Width"

#: flatcamGUI/PreferencesUI.py:4079 flatcamTools/ToolCalculators.py:168
msgid "This is the board width.In centimeters."
msgstr "This is the board width.In centimeters."

#: flatcamGUI/PreferencesUI.py:4084 flatcamTools/ToolCalculators.py:170
msgid "Current Density"
msgstr "Current Density"

#: flatcamGUI/PreferencesUI.py:4087 flatcamTools/ToolCalculators.py:174
msgid ""
"Current density to pass through the board. \n"
"In Amps per Square Feet ASF."
msgstr ""
"Current density to pass through the board. \n"
"In Amps per Square Feet ASF."

#: flatcamGUI/PreferencesUI.py:4093 flatcamTools/ToolCalculators.py:177
msgid "Copper Growth"
msgstr "Copper Growth"

#: flatcamGUI/PreferencesUI.py:4096 flatcamTools/ToolCalculators.py:181
msgid ""
"How thick the copper growth is intended to be.\n"
"In microns."
msgstr ""
"How thick the copper growth is intended to be.\n"
"In microns."

#: flatcamGUI/PreferencesUI.py:4109
msgid "Transform Tool Options"
msgstr "Transform Tool Options"

#: flatcamGUI/PreferencesUI.py:4114
msgid ""
"Various transformations that can be applied\n"
"on a FlatCAM object."
msgstr ""
"Various transformations that can be applied\n"
"on a FlatCAM object."

#: flatcamGUI/PreferencesUI.py:4124
msgid "Rotate Angle"
msgstr "Rotate Angle"

#: flatcamGUI/PreferencesUI.py:4136 flatcamTools/ToolTransform.py:107
msgid "Skew_X angle"
msgstr "Skew_X angle"

#: flatcamGUI/PreferencesUI.py:4146 flatcamTools/ToolTransform.py:125
msgid "Skew_Y angle"
msgstr "Skew_Y angle"

#: flatcamGUI/PreferencesUI.py:4156 flatcamTools/ToolTransform.py:164
msgid "Scale_X factor"
msgstr "Scale_X factor"

#: flatcamGUI/PreferencesUI.py:4158 flatcamTools/ToolTransform.py:166
msgid "Factor for scaling on X axis."
msgstr "Factor for scaling on X axis."

#: flatcamGUI/PreferencesUI.py:4165 flatcamTools/ToolTransform.py:181
msgid "Scale_Y factor"
msgstr "Scale_Y factor"

#: flatcamGUI/PreferencesUI.py:4167 flatcamTools/ToolTransform.py:183
msgid "Factor for scaling on Y axis."
msgstr "Factor for scaling on Y axis."

#: flatcamGUI/PreferencesUI.py:4175 flatcamTools/ToolTransform.py:202
msgid ""
"Scale the selected object(s)\n"
"using the Scale_X factor for both axis."
msgstr ""
"Scale the selected object(s)\n"
"using the Scale_X factor for both axis."

#: flatcamGUI/PreferencesUI.py:4183 flatcamTools/ToolTransform.py:211
msgid ""
"Scale the selected object(s)\n"
"using the origin reference when checked,\n"
"and the center of the biggest bounding box\n"
"of the selected objects when unchecked."
msgstr ""
"Scale the selected object(s)\n"
"using the origin reference when checked,\n"
"and the center of the biggest bounding box\n"
"of the selected objects when unchecked."

#: flatcamGUI/PreferencesUI.py:4192 flatcamTools/ToolTransform.py:239
msgid "Offset_X val"
msgstr "Offset_X val"

#: flatcamGUI/PreferencesUI.py:4194 flatcamTools/ToolTransform.py:241
msgid "Distance to offset on X axis. In current units."
msgstr "Distance to offset on X axis. In current units."

#: flatcamGUI/PreferencesUI.py:4201 flatcamTools/ToolTransform.py:256
msgid "Offset_Y val"
msgstr "Offset_Y val"

#: flatcamGUI/PreferencesUI.py:4203 flatcamTools/ToolTransform.py:258
msgid "Distance to offset on Y axis. In current units."
msgstr "Distance to offset on Y axis. In current units."

#: flatcamGUI/PreferencesUI.py:4209 flatcamTools/ToolTransform.py:313
msgid "Mirror Reference"
msgstr "Mirror Reference"

#: flatcamGUI/PreferencesUI.py:4211 flatcamTools/ToolTransform.py:315
msgid ""
"Flip the selected object(s)\n"
"around the point in Point Entry Field.\n"
"\n"
"The point coordinates can be captured by\n"
"left click on canvas together with pressing\n"
"SHIFT key. \n"
"Then click Add button to insert coordinates.\n"
"Or enter the coords in format (x, y) in the\n"
"Point Entry field and click Flip on X(Y)"
msgstr ""
"Flip the selected object(s)\n"
"around the point in Point Entry Field.\n"
"\n"
"The point coordinates can be captured by\n"
"left click on canvas together with pressing\n"
"SHIFT key. \n"
"Then click Add button to insert coordinates.\n"
"Or enter the coords in format (x, y) in the\n"
"Point Entry field and click Flip on X(Y)"

#: flatcamGUI/PreferencesUI.py:4222 flatcamTools/ToolTransform.py:326
msgid " Mirror Ref. Point"
msgstr " Mirror Ref. Point"

#: flatcamGUI/PreferencesUI.py:4224 flatcamTools/ToolTransform.py:328
msgid ""
"Coordinates in format (x, y) used as reference for mirroring.\n"
"The 'x' in (x, y) will be used when using Flip on X and\n"
"the 'y' in (x, y) will be used when using Flip on Y and"
msgstr ""
"Coordinates in format (x, y) used as reference for mirroring.\n"
"The 'x' in (x, y) will be used when using Flip on X and\n"
"the 'y' in (x, y) will be used when using Flip on Y and"

#: flatcamGUI/PreferencesUI.py:4241
msgid "SolderPaste Tool Options"
msgstr "SolderPaste Tool Options"

#: flatcamGUI/PreferencesUI.py:4246
msgid ""
"A tool to create GCode for dispensing\n"
"solder paste onto a PCB."
msgstr ""
"A tool to create GCode for dispensing\n"
"solder paste onto a PCB."

#: flatcamGUI/PreferencesUI.py:4257
msgid "Diameters of nozzle tools, separated by ','"
msgstr "Diameters of nozzle tools, separated by ','"

#: flatcamGUI/PreferencesUI.py:4264
msgid "New Nozzle Dia"
msgstr "New Nozzle Dia"

#: flatcamGUI/PreferencesUI.py:4266 flatcamTools/ToolSolderPaste.py:103
msgid "Diameter for the new Nozzle tool to add in the Tool Table"
msgstr "Diameter for the new Nozzle tool to add in the Tool Table"

#: flatcamGUI/PreferencesUI.py:4274 flatcamTools/ToolSolderPaste.py:166
msgid "Z Dispense Start"
msgstr "Z Dispense Start"

#: flatcamGUI/PreferencesUI.py:4276 flatcamTools/ToolSolderPaste.py:168
msgid "The height (Z) when solder paste dispensing starts."
msgstr "The height (Z) when solder paste dispensing starts."

#: flatcamGUI/PreferencesUI.py:4283 flatcamTools/ToolSolderPaste.py:174
msgid "Z Dispense"
msgstr "Z Dispense"

#: flatcamGUI/PreferencesUI.py:4285 flatcamTools/ToolSolderPaste.py:176
msgid "The height (Z) when doing solder paste dispensing."
msgstr "The height (Z) when doing solder paste dispensing."

#: flatcamGUI/PreferencesUI.py:4292 flatcamTools/ToolSolderPaste.py:182
msgid "Z Dispense Stop"
msgstr "Z Dispense Stop"

#: flatcamGUI/PreferencesUI.py:4294 flatcamTools/ToolSolderPaste.py:184
msgid "The height (Z) when solder paste dispensing stops."
msgstr "The height (Z) when solder paste dispensing stops."

#: flatcamGUI/PreferencesUI.py:4301 flatcamTools/ToolSolderPaste.py:190
msgid "Z Travel"
msgstr "Z Travel"

#: flatcamGUI/PreferencesUI.py:4303 flatcamTools/ToolSolderPaste.py:192
msgid ""
"The height (Z) for travel between pads\n"
"(without dispensing solder paste)."
msgstr ""
"The height (Z) for travel between pads\n"
"(without dispensing solder paste)."

#: flatcamGUI/PreferencesUI.py:4311 flatcamTools/ToolSolderPaste.py:199
msgid "Z Toolchange"
msgstr "Z Toolchange"

#: flatcamGUI/PreferencesUI.py:4313 flatcamTools/ToolSolderPaste.py:201
msgid "The height (Z) for tool (nozzle) change."
msgstr "The height (Z) for tool (nozzle) change."

#: flatcamGUI/PreferencesUI.py:4322 flatcamTools/ToolSolderPaste.py:209
msgid ""
"The X,Y location for tool (nozzle) change.\n"
"The format is (x, y) where x and y are real numbers."
msgstr ""
"The X,Y location for tool (nozzle) change.\n"
"The format is (x, y) where x and y are real numbers."

#: flatcamGUI/PreferencesUI.py:4330 flatcamTools/ToolSolderPaste.py:216
msgid "Feedrate X-Y"
msgstr "Feedrate X-Y"

#: flatcamGUI/PreferencesUI.py:4332 flatcamTools/ToolSolderPaste.py:218
msgid "Feedrate (speed) while moving on the X-Y plane."
msgstr "Feedrate (speed) while moving on the X-Y plane."

#: flatcamGUI/PreferencesUI.py:4341 flatcamTools/ToolSolderPaste.py:226
msgid ""
"Feedrate (speed) while moving vertically\n"
"(on Z plane)."
msgstr ""
"Feedrate (speed) while moving vertically\n"
"(on Z plane)."

#: flatcamGUI/PreferencesUI.py:4349 flatcamTools/ToolSolderPaste.py:233
msgid "Feedrate Z Dispense"
msgstr "Feedrate Z Dispense"

#: flatcamGUI/PreferencesUI.py:4351
msgid ""
"Feedrate (speed) while moving up vertically\n"
"to Dispense position (on Z plane)."
msgstr ""
"Feedrate (speed) while moving up vertically\n"
"to Dispense position (on Z plane)."

#: flatcamGUI/PreferencesUI.py:4359 flatcamTools/ToolSolderPaste.py:242
msgid "Spindle Speed FWD"
msgstr "Spindle Speed FWD"

#: flatcamGUI/PreferencesUI.py:4361 flatcamTools/ToolSolderPaste.py:244
msgid ""
"The dispenser speed while pushing solder paste\n"
"through the dispenser nozzle."
msgstr ""
"The dispenser speed while pushing solder paste\n"
"through the dispenser nozzle."

#: flatcamGUI/PreferencesUI.py:4369 flatcamTools/ToolSolderPaste.py:251
msgid "Dwell FWD"
msgstr "Dwell FWD"

#: flatcamGUI/PreferencesUI.py:4371 flatcamTools/ToolSolderPaste.py:253
msgid "Pause after solder dispensing."
msgstr "Pause after solder dispensing."

#: flatcamGUI/PreferencesUI.py:4378 flatcamTools/ToolSolderPaste.py:259
msgid "Spindle Speed REV"
msgstr "Spindle Speed REV"

#: flatcamGUI/PreferencesUI.py:4380 flatcamTools/ToolSolderPaste.py:261
msgid ""
"The dispenser speed while retracting solder paste\n"
"through the dispenser nozzle."
msgstr ""
"The dispenser speed while retracting solder paste\n"
"through the dispenser nozzle."

#: flatcamGUI/PreferencesUI.py:4388 flatcamTools/ToolSolderPaste.py:268
msgid "Dwell REV"
msgstr "Dwell REV"

#: flatcamGUI/PreferencesUI.py:4390 flatcamTools/ToolSolderPaste.py:270
msgid ""
"Pause after solder paste dispenser retracted,\n"
"to allow pressure equilibrium."
msgstr ""
"Pause after solder paste dispenser retracted,\n"
"to allow pressure equilibrium."

#: flatcamGUI/PreferencesUI.py:4399 flatcamTools/ToolSolderPaste.py:278
msgid "Files that control the GCode generation."
msgstr "Files that control the GCode generation."

#: flatcamGUI/PreferencesUI.py:4414
msgid "Substractor Tool Options"
msgstr "Substractor Tool Options"

#: flatcamGUI/PreferencesUI.py:4419
msgid ""
"A tool to substract one Gerber or Geometry object\n"
"from another of the same type."
msgstr ""
"A tool to substract one Gerber or Geometry object\n"
"from another of the same type."

#: flatcamGUI/PreferencesUI.py:4424 flatcamTools/ToolSub.py:135
msgid "Close paths"
msgstr "Close paths"

#: flatcamGUI/PreferencesUI.py:4425 flatcamTools/ToolSub.py:136
msgid ""
"Checking this will close the paths cut by the Geometry substractor object."
msgstr ""
"Checking this will close the paths cut by the Geometry substractor object."

#: flatcamGUI/PreferencesUI.py:4436
msgid "Excellon File associations"
msgstr "Excellon File associations"

#: flatcamGUI/PreferencesUI.py:4448 flatcamGUI/PreferencesUI.py:4520
#: flatcamGUI/PreferencesUI.py:4589 flatcamGUI/PreferencesUI.py:4658
msgid "Restore"
msgstr "Restore"

#: flatcamGUI/PreferencesUI.py:4449 flatcamGUI/PreferencesUI.py:4521
#: flatcamGUI/PreferencesUI.py:4590
msgid "Restore the extension list to the default state."
msgstr "Restore the extension list to the default state."

#: flatcamGUI/PreferencesUI.py:4450 flatcamGUI/PreferencesUI.py:4522
#: flatcamGUI/PreferencesUI.py:4591 flatcamGUI/PreferencesUI.py:4660
#| msgid "Delete Drill"
msgid "Delete All"
msgstr "Delete All"

#: flatcamGUI/PreferencesUI.py:4451 flatcamGUI/PreferencesUI.py:4523
#: flatcamGUI/PreferencesUI.py:4592
#| msgid "Delete a aperture in the aperture list"
msgid "Delete all extensions from the list."
msgstr "Delete all extensions from the list."

#: flatcamGUI/PreferencesUI.py:4459 flatcamGUI/PreferencesUI.py:4531
#: flatcamGUI/PreferencesUI.py:4600
msgid "Extensions list"
msgstr "Extensions list"

#: flatcamGUI/PreferencesUI.py:4461 flatcamGUI/PreferencesUI.py:4533
#: flatcamGUI/PreferencesUI.py:4602
msgid ""
"List of file extensions to be\n"
"associated with FlatCAM."
msgstr ""
"List of file extensions to be\n"
"associated with FlatCAM."

#: flatcamGUI/PreferencesUI.py:4481 flatcamGUI/PreferencesUI.py:4553
#: flatcamGUI/PreferencesUI.py:4621 flatcamGUI/PreferencesUI.py:4692
#| msgid "Extensions list"
msgid "Extension"
msgstr "Extension"

#: flatcamGUI/PreferencesUI.py:4482 flatcamGUI/PreferencesUI.py:4554
#: flatcamGUI/PreferencesUI.py:4622
#| msgid ""
#| "List of file extensions to be\n"
#| "associated with FlatCAM."
msgid "A file extension to be added or deleted to the list."
msgstr "A file extension to be added or deleted to the list."

#: flatcamGUI/PreferencesUI.py:4490 flatcamGUI/PreferencesUI.py:4562
#: flatcamGUI/PreferencesUI.py:4630
#| msgid "Add Region"
msgid "Add Extension"
msgstr "Add Extension"

#: flatcamGUI/PreferencesUI.py:4491 flatcamGUI/PreferencesUI.py:4563
#: flatcamGUI/PreferencesUI.py:4631
#| msgid "Add a new aperture to the aperture list."
msgid "Add a file extension to the list"
msgstr "Add a file extension to the list"

#: flatcamGUI/PreferencesUI.py:4492 flatcamGUI/PreferencesUI.py:4564
#: flatcamGUI/PreferencesUI.py:4632
#| msgid "Get Exteriors"
msgid "Delete Extension"
msgstr "Delete Extension"

#: flatcamGUI/PreferencesUI.py:4493 flatcamGUI/PreferencesUI.py:4565
#: flatcamGUI/PreferencesUI.py:4633
#| msgid "Selected GCode file extensions registered with FlatCAM."
msgid "Delete a file extension from the list"
msgstr "Delete a file extension from the list"

#: flatcamGUI/PreferencesUI.py:4500 flatcamGUI/PreferencesUI.py:4572
#: flatcamGUI/PreferencesUI.py:4640
#| msgid "Display Annotation"
msgid "Apply Association"
msgstr "Apply Association"

#: flatcamGUI/PreferencesUI.py:4501 flatcamGUI/PreferencesUI.py:4573
#: flatcamGUI/PreferencesUI.py:4641
msgid ""
"Apply the file associations between\n"
"FlatCAM and the files with above extensions.\n"
"They will be active after next logon.\n"
"This work only in Windows."
msgstr ""
"Apply the file associations between\n"
"FlatCAM and the files with above extensions.\n"
"They will be active after next logon.\n"
"This work only in Windows."

#: flatcamGUI/PreferencesUI.py:4518
msgid "GCode File associations"
msgstr "GCode File associations"

#: flatcamGUI/PreferencesUI.py:4587
msgid "Gerber File associations"
msgstr "Gerber File associations"

#: flatcamGUI/PreferencesUI.py:4656
msgid "Autocompleter Keywords"
msgstr "Autocompleter Keywords"

#: flatcamGUI/PreferencesUI.py:4659
msgid "Restore the autocompleter keywords list to the default state."
msgstr "Restore the autocompleter keywords list to the default state."

#: flatcamGUI/PreferencesUI.py:4661
msgid "Delete all autocompleter keywords from the list."
msgstr "Delete all autocompleter keywords from the list."

#: flatcamGUI/PreferencesUI.py:4669
msgid "Keywords list"
msgstr "Keywords list"

#: flatcamGUI/PreferencesUI.py:4671
msgid ""
"List of keywords used by\n"
"the autocompleter in FlatCAM.\n"
"The autocompleter is installed\n"
"in the Code Editor and for the Tcl Shell."
msgstr ""
"List of keywords used by\n"
"the autocompleter in FlatCAM.\n"
"The autocompleter is installed\n"
"in the Code Editor and for the Tcl Shell."

#: flatcamGUI/PreferencesUI.py:4693
msgid "A keyword to be added or deleted to the list."
msgstr "A keyword to be added or deleted to the list."

#: flatcamGUI/PreferencesUI.py:4701
msgid "Add keyword"
msgstr "Add keyword"

#: flatcamGUI/PreferencesUI.py:4702
#| msgid "Add an aperture to the aperture list"
msgid "Add a keyword to the list"
msgstr "Add a keyword to the list"

#: flatcamGUI/PreferencesUI.py:4703
#| msgid "Delete Tool"
msgid "Delete keyword"
msgstr "Delete keyword"

#: flatcamGUI/PreferencesUI.py:4704
#| msgid "Delete a aperture in the aperture list"
msgid "Delete a keyword from the list"
msgstr "Delete a keyword from the list"

#: flatcamParsers/ParseFont.py:305
msgid "Font not supported, try another one."
msgstr "Font not supported, try another one."

#: flatcamTools/ToolCalculators.py:24
msgid "Calculators"
msgstr "Calculators"

#: flatcamTools/ToolCalculators.py:26
msgid "Units Calculator"
msgstr "Units Calculator"

#: flatcamTools/ToolCalculators.py:68
msgid "Here you enter the value to be converted from INCH to MM"
msgstr "Here you enter the value to be converted from INCH to MM"

#: flatcamTools/ToolCalculators.py:73
msgid "Here you enter the value to be converted from MM to INCH"
msgstr "Here you enter the value to be converted from MM to INCH"

#: flatcamTools/ToolCalculators.py:104
msgid ""
"This is the angle of the tip of the tool.\n"
"It is specified by manufacturer."
msgstr ""
"This is the angle of the tip of the tool.\n"
"It is specified by manufacturer."

#: flatcamTools/ToolCalculators.py:111
msgid ""
"This is the depth to cut into the material.\n"
"In the CNCJob is the CutZ parameter."
msgstr ""
"This is the depth to cut into the material.\n"
"In the CNCJob is the CutZ parameter."

#: flatcamTools/ToolCalculators.py:114
msgid "Tool Diameter"
msgstr "Tool Diameter"

#: flatcamTools/ToolCalculators.py:118
msgid ""
"This is the tool diameter to be entered into\n"
"FlatCAM Gerber section.\n"
"In the CNCJob section it is called >Tool dia<."
msgstr ""
"This is the tool diameter to be entered into\n"
"FlatCAM Gerber section.\n"
"In the CNCJob section it is called >Tool dia<."

#: flatcamTools/ToolCalculators.py:129 flatcamTools/ToolCalculators.py:210
msgid "Calculate"
msgstr "Calculate"

#: flatcamTools/ToolCalculators.py:132
msgid ""
"Calculate either the Cut Z or the effective tool diameter,\n"
"  depending on which is desired and which is known. "
msgstr ""
"Calculate either the Cut Z or the effective tool diameter,\n"
"  depending on which is desired and which is known. "

#: flatcamTools/ToolCalculators.py:186
msgid "Current Value"
msgstr "Current Value"

#: flatcamTools/ToolCalculators.py:190
msgid ""
"This is the current intensity value\n"
"to be set on the Power Supply. In Amps."
msgstr ""
"This is the current intensity value\n"
"to be set on the Power Supply. In Amps."

#: flatcamTools/ToolCalculators.py:194
msgid "Time"
msgstr "Time"

#: flatcamTools/ToolCalculators.py:198
msgid ""
"This is the calculated time required for the procedure.\n"
"In minutes."
msgstr ""
"This is the calculated time required for the procedure.\n"
"In minutes."

#: flatcamTools/ToolCalculators.py:213
msgid ""
"Calculate the current intensity value and the procedure time,\n"
"depending on the parameters above"
msgstr ""
"Calculate the current intensity value and the procedure time,\n"
"depending on the parameters above"

#: flatcamTools/ToolCalculators.py:262
msgid "Calc. Tool"
msgstr "Calc. Tool"

#: flatcamTools/ToolCutOut.py:18
msgid "Cutout PCB"
msgstr "Cutout PCB"

#: flatcamTools/ToolCutOut.py:55
msgid ""
"Specify the type of object to be cutout.\n"
"It can be of type: Gerber or Geometry.\n"
"What is selected here will dictate the kind\n"
"of objects that will populate the 'Object' combobox."
msgstr ""
"Specify the type of object to be cutout.\n"
"It can be of type: Gerber or Geometry.\n"
"What is selected here will dictate the kind\n"
"of objects that will populate the 'Object' combobox."

#: flatcamTools/ToolCutOut.py:71
msgid "Object to be cutout.                        "
msgstr "Object to be cutout.                        "

#: flatcamTools/ToolCutOut.py:100
msgid "Margin:"
msgstr "Margin:"

#: flatcamTools/ToolCutOut.py:110
msgid "Gap size:"
msgstr "Gap size:"

#: flatcamTools/ToolCutOut.py:137
msgid "A. Automatic Bridge Gaps"
msgstr "A. Automatic Bridge Gaps"

#: flatcamTools/ToolCutOut.py:139
msgid "This section handle creation of automatic bridge gaps."
msgstr "This section handle creation of automatic bridge gaps."

#: flatcamTools/ToolCutOut.py:150
msgid ""
"Number of gaps used for the Automatic cutout.\n"
"There can be maximum 8 bridges/gaps.\n"
"The choices are:\n"
"- None  - no gaps\n"
"- lr    - left + right\n"
"- tb    - top + bottom\n"
"- 4     - left + right +top + bottom\n"
"- 2lr   - 2*left + 2*right\n"
"- 2tb  - 2*top + 2*bottom\n"
"- 8     - 2*left + 2*right +2*top + 2*bottom"
msgstr ""
"Number of gaps used for the Automatic cutout.\n"
"There can be maximum 8 bridges/gaps.\n"
"The choices are:\n"
"- None  - no gaps\n"
"- lr    - left + right\n"
"- tb    - top + bottom\n"
"- 4     - left + right +top + bottom\n"
"- 2lr   - 2*left + 2*right\n"
"- 2tb  - 2*top + 2*bottom\n"
"- 8     - 2*left + 2*right +2*top + 2*bottom"

#: flatcamTools/ToolCutOut.py:174
msgid "FreeForm"
msgstr "FreeForm"

#: flatcamTools/ToolCutOut.py:176
msgid ""
"The cutout shape can be of ny shape.\n"
"Useful when the PCB has a non-rectangular shape."
msgstr ""
"The cutout shape can be of ny shape.\n"
"Useful when the PCB has a non-rectangular shape."

#: flatcamTools/ToolCutOut.py:185
msgid ""
"Cutout the selected object.\n"
"The cutout shape can be of any shape.\n"
"Useful when the PCB has a non-rectangular shape."
msgstr ""
"Cutout the selected object.\n"
"The cutout shape can be of any shape.\n"
"Useful when the PCB has a non-rectangular shape."

#: flatcamTools/ToolCutOut.py:194
msgid "Rectangular"
msgstr "Rectangular"

#: flatcamTools/ToolCutOut.py:196
msgid ""
"The resulting cutout shape is\n"
"always a rectangle shape and it will be\n"
"the bounding box of the Object."
msgstr ""
"The resulting cutout shape is\n"
"always a rectangle shape and it will be\n"
"the bounding box of the Object."

#: flatcamTools/ToolCutOut.py:205
msgid ""
"Cutout the selected object.\n"
"The resulting cutout shape is\n"
"always a rectangle shape and it will be\n"
"the bounding box of the Object."
msgstr ""
"Cutout the selected object.\n"
"The resulting cutout shape is\n"
"always a rectangle shape and it will be\n"
"the bounding box of the Object."

#: flatcamTools/ToolCutOut.py:213
msgid "B. Manual Bridge Gaps"
msgstr "B. Manual Bridge Gaps"

#: flatcamTools/ToolCutOut.py:215
msgid ""
"This section handle creation of manual bridge gaps.\n"
"This is done by mouse clicking on the perimeter of the\n"
"Geometry object that is used as a cutout object. "
msgstr ""
"This section handle creation of manual bridge gaps.\n"
"This is done by mouse clicking on the perimeter of the\n"
"Geometry object that is used as a cutout object. "

#: flatcamTools/ToolCutOut.py:231
msgid "Geo Obj"
msgstr "Geo Obj"

#: flatcamTools/ToolCutOut.py:233
msgid "Geometry object used to create the manual cutout."
msgstr "Geometry object used to create the manual cutout."

#: flatcamTools/ToolCutOut.py:244
msgid "Manual Geo"
msgstr "Manual Geo"

#: flatcamTools/ToolCutOut.py:246 flatcamTools/ToolCutOut.py:256
msgid ""
"If the object to be cutout is a Gerber\n"
"first create a Geometry that surrounds it,\n"
"to be used as the cutout, if one doesn't exist yet.\n"
"Select the source Gerber file in the top object combobox."
msgstr ""
"If the object to be cutout is a Gerber\n"
"first create a Geometry that surrounds it,\n"
"to be used as the cutout, if one doesn't exist yet.\n"
"Select the source Gerber file in the top object combobox."

#: flatcamTools/ToolCutOut.py:266
msgid "Manual Add Bridge Gaps"
msgstr "Manual Add Bridge Gaps"

#: flatcamTools/ToolCutOut.py:268
msgid ""
"Use the left mouse button (LMB) click\n"
"to create a bridge gap to separate the PCB from\n"
"the surrounding material."
msgstr ""
"Use the left mouse button (LMB) click\n"
"to create a bridge gap to separate the PCB from\n"
"the surrounding material."

#: flatcamTools/ToolCutOut.py:275
msgid "Generate Gap"
msgstr "Generate Gap"

#: flatcamTools/ToolCutOut.py:277
msgid ""
"Use the left mouse button (LMB) click\n"
"to create a bridge gap to separate the PCB from\n"
"the surrounding material.\n"
"The LMB click has to be done on the perimeter of\n"
"the Geometry object used as a cutout geometry."
msgstr ""
"Use the left mouse button (LMB) click\n"
"to create a bridge gap to separate the PCB from\n"
"the surrounding material.\n"
"The LMB click has to be done on the perimeter of\n"
"the Geometry object used as a cutout geometry."

#: flatcamTools/ToolCutOut.py:371 flatcamTools/ToolCutOut.py:571
#: flatcamTools/ToolNonCopperClear.py:1087
#: flatcamTools/ToolNonCopperClear.py:1128
#: flatcamTools/ToolNonCopperClear.py:1269 flatcamTools/ToolPaint.py:1153
#: flatcamTools/ToolPanelize.py:359 flatcamTools/ToolPanelize.py:376
#: flatcamTools/ToolSub.py:254 flatcamTools/ToolSub.py:269
#: flatcamTools/ToolSub.py:456 flatcamTools/ToolSub.py:471
#: tclCommands/TclCommandCopperClear.py:131
#: tclCommands/TclCommandCopperClear.py:207 tclCommands/TclCommandPaint.py:133
msgid "Could not retrieve object"
msgstr "Could not retrieve object"

#: flatcamTools/ToolCutOut.py:376
msgid ""
"There is no object selected for Cutout.\n"
"Select one and try again."
msgstr ""
"There is no object selected for Cutout.\n"
"Select one and try again."

#: flatcamTools/ToolCutOut.py:392 flatcamTools/ToolCutOut.py:590
#: flatcamTools/ToolCutOut.py:760 flatcamTools/ToolCutOut.py:854
msgid "Tool Diameter is zero value. Change it to a positive real number."
msgstr "Tool Diameter is zero value. Change it to a positive real number."

#: flatcamTools/ToolCutOut.py:408 flatcamTools/ToolCutOut.py:606
#: flatcamTools/ToolCutOut.py:870
msgid "Margin value is missing or wrong format. Add it and retry."
msgstr "Margin value is missing or wrong format. Add it and retry."

#: flatcamTools/ToolCutOut.py:419 flatcamTools/ToolCutOut.py:617
#: flatcamTools/ToolCutOut.py:771
msgid "Gap size value is missing or wrong format. Add it and retry."
msgstr "Gap size value is missing or wrong format. Add it and retry."

#: flatcamTools/ToolCutOut.py:425 flatcamTools/ToolCutOut.py:624
msgid "Number of gaps value is missing. Add it and retry."
msgstr "Number of gaps value is missing. Add it and retry."

#: flatcamTools/ToolCutOut.py:430 flatcamTools/ToolCutOut.py:628
msgid ""
"Gaps value can be only one of: 'None', 'lr', 'tb', '2lr', '2tb', 4 or 8. "
"Fill in a correct value and retry. "
msgstr ""
"Gaps value can be only one of: 'None', 'lr', 'tb', '2lr', '2tb', 4 or 8. "
"Fill in a correct value and retry. "

#: flatcamTools/ToolCutOut.py:435 flatcamTools/ToolCutOut.py:634
msgid ""
"Cutout operation cannot be done on a multi-geo Geometry.\n"
"Optionally, this Multi-geo Geometry can be converted to Single-geo "
"Geometry,\n"
"and after that perform Cutout."
msgstr ""
"Cutout operation cannot be done on a multi-geo Geometry.\n"
"Optionally, this Multi-geo Geometry can be converted to Single-geo "
"Geometry,\n"
"and after that perform Cutout."

#: flatcamTools/ToolCutOut.py:554 flatcamTools/ToolCutOut.py:739
msgid "Any form CutOut operation finished."
msgstr "Any form CutOut operation finished."

#: flatcamTools/ToolCutOut.py:575 flatcamTools/ToolNonCopperClear.py:1091
#: flatcamTools/ToolPaint.py:955 flatcamTools/ToolPanelize.py:366
#: tclCommands/TclCommandBbox.py:66 tclCommands/TclCommandNregions.py:65
msgid "Object not found"
msgstr "Object not found"

#: flatcamTools/ToolCutOut.py:744
msgid ""
"Click on the selected geometry object perimeter to create a bridge gap ..."
msgstr ""
"Click on the selected geometry object perimeter to create a bridge gap ..."

#: flatcamTools/ToolCutOut.py:780 flatcamTools/ToolCutOut.py:799
msgid "Could not retrieve Geometry object"
msgstr "Could not retrieve Geometry object"

#: flatcamTools/ToolCutOut.py:804
msgid "Geometry object for manual cutout not found"
msgstr "Geometry object for manual cutout not found"

#: flatcamTools/ToolCutOut.py:814
msgid "Added manual Bridge Gap."
msgstr "Added manual Bridge Gap."

#: flatcamTools/ToolCutOut.py:826
msgid "Could not retrieve Gerber object"
msgstr "Could not retrieve Gerber object"

#: flatcamTools/ToolCutOut.py:831
msgid ""
"There is no Gerber object selected for Cutout.\n"
"Select one and try again."
msgstr ""
"There is no Gerber object selected for Cutout.\n"
"Select one and try again."

#: flatcamTools/ToolCutOut.py:837
msgid ""
"The selected object has to be of Gerber type.\n"
"Select a Gerber file and try again."
msgstr ""
"The selected object has to be of Gerber type.\n"
"Select a Gerber file and try again."

#: flatcamTools/ToolCutOut.py:892
msgid "Geometry not supported for cutout"
msgstr "Geometry not supported for cutout"

#: flatcamTools/ToolCutOut.py:928
msgid "Making manual bridge gap..."
msgstr "Making manual bridge gap..."

#: flatcamTools/ToolDblSided.py:18
msgid "2-Sided PCB"
msgstr "2-Sided PCB"

#: flatcamTools/ToolDblSided.py:52 flatcamTools/ToolDblSided.py:76
#: flatcamTools/ToolDblSided.py:100
msgid "Mirror"
msgstr "Mirror"

#: flatcamTools/ToolDblSided.py:54 flatcamTools/ToolDblSided.py:78
#: flatcamTools/ToolDblSided.py:102
msgid ""
"Mirrors (flips) the specified object around \n"
"the specified axis. Does not create a new \n"
"object, but modifies it."
msgstr ""
"Mirrors (flips) the specified object around \n"
"the specified axis. Does not create a new \n"
"object, but modifies it."

#: flatcamTools/ToolDblSided.py:73
msgid "Excellon Object to be mirrored."
msgstr "Excellon Object to be mirrored."

#: flatcamTools/ToolDblSided.py:97
msgid "Geometry Obj to be mirrored."
msgstr "Geometry Obj to be mirrored."

#: flatcamTools/ToolDblSided.py:133
msgid "Axis Ref:"
msgstr "Axis Ref:"

#: flatcamTools/ToolDblSided.py:152
msgid "Point/Box Reference"
msgstr "Point/Box Reference"

#: flatcamTools/ToolDblSided.py:154
msgid ""
"If 'Point' is selected above it store the coordinates (x, y) through which\n"
"the mirroring axis passes.\n"
"If 'Box' is selected above, select here a FlatCAM object (Gerber, Exc or "
"Geo).\n"
"Through the center of this object pass the mirroring axis selected above."
msgstr ""
"If 'Point' is selected above it store the coordinates (x, y) through which\n"
"the mirroring axis passes.\n"
"If 'Box' is selected above, select here a FlatCAM object (Gerber, Exc or "
"Geo).\n"
"Through the center of this object pass the mirroring axis selected above."

#: flatcamTools/ToolDblSided.py:162
msgid ""
"Add the coordinates in format <b>(x, y)</b> through which the mirroring "
"axis \n"
" selected in 'MIRROR AXIS' pass.\n"
"The (x, y) coordinates are captured by pressing SHIFT key\n"
"and left mouse button click on canvas or you can enter the coords manually."
msgstr ""
"Add the coordinates in format <b>(x, y)</b> through which the mirroring "
"axis \n"
" selected in 'MIRROR AXIS' pass.\n"
"The (x, y) coordinates are captured by pressing SHIFT key\n"
"and left mouse button click on canvas or you can enter the coords manually."

#: flatcamTools/ToolDblSided.py:182 flatcamTools/ToolNonCopperClear.py:424
#: flatcamTools/ToolPaint.py:322
msgid "Gerber   Reference Box Object"
msgstr "Gerber   Reference Box Object"

#: flatcamTools/ToolDblSided.py:183 flatcamTools/ToolNonCopperClear.py:425
#: flatcamTools/ToolPaint.py:323
msgid "Excellon Reference Box Object"
msgstr "Excellon Reference Box Object"

#: flatcamTools/ToolDblSided.py:184 flatcamTools/ToolNonCopperClear.py:426
#: flatcamTools/ToolPaint.py:324
msgid "Geometry Reference Box Object"
msgstr "Geometry Reference Box Object"

#: flatcamTools/ToolDblSided.py:192
msgid "Alignment Drill Coordinates"
msgstr "Alignment Drill Coordinates"

#: flatcamTools/ToolDblSided.py:194
msgid ""
"Alignment holes (x1, y1), (x2, y2), ... on one side of the mirror axis. For "
"each set of (x, y) coordinates\n"
"entered here, a pair of drills will be created:\n"
"\n"
"- one drill at the coordinates from the field\n"
"- one drill in mirror position over the axis selected above in the 'Mirror "
"Axis'."
msgstr ""
"Alignment holes (x1, y1), (x2, y2), ... on one side of the mirror axis. For "
"each set of (x, y) coordinates\n"
"entered here, a pair of drills will be created:\n"
"\n"
"- one drill at the coordinates from the field\n"
"- one drill in mirror position over the axis selected above in the 'Mirror "
"Axis'."

#: flatcamTools/ToolDblSided.py:209
msgid ""
"Add alignment drill holes coords in the format: (x1, y1), (x2, y2), ... \n"
"on one side of the mirror axis.\n"
"\n"
"The coordinates set can be obtained:\n"
"- press SHIFT key and left mouse clicking on canvas. Then click Add.\n"
"- press SHIFT key and left mouse clicking on canvas. Then CTRL+V in the "
"field.\n"
"- press SHIFT key and left mouse clicking on canvas. Then RMB click in the "
"field and click Paste.\n"
"- by entering the coords manually in the format: (x1, y1), (x2, y2), ..."
msgstr ""
"Add alignment drill holes coords in the format: (x1, y1), (x2, y2), ... \n"
"on one side of the mirror axis.\n"
"\n"
"The coordinates set can be obtained:\n"
"- press SHIFT key and left mouse clicking on canvas. Then click Add.\n"
"- press SHIFT key and left mouse clicking on canvas. Then CTRL+V in the "
"field.\n"
"- press SHIFT key and left mouse clicking on canvas. Then RMB click in the "
"field and click Paste.\n"
"- by entering the coords manually in the format: (x1, y1), (x2, y2), ..."

#: flatcamTools/ToolDblSided.py:223
msgid "Alignment Drill Diameter"
msgstr "Alignment Drill Diameter"

#: flatcamTools/ToolDblSided.py:246
msgid "Create Excellon Object"
msgstr "Create Excellon Object"

#: flatcamTools/ToolDblSided.py:248
msgid ""
"Creates an Excellon Object containing the\n"
"specified alignment holes and their mirror\n"
"images."
msgstr ""
"Creates an Excellon Object containing the\n"
"specified alignment holes and their mirror\n"
"images."

#: flatcamTools/ToolDblSided.py:254
msgid "Reset"
msgstr "Reset"

#: flatcamTools/ToolDblSided.py:256
msgid "Resets all the fields."
msgstr "Resets all the fields."

#: flatcamTools/ToolDblSided.py:306
msgid "2-Sided Tool"
msgstr "2-Sided Tool"

#: flatcamTools/ToolDblSided.py:331
msgid ""
"'Point' reference is selected and 'Point' coordinates are missing. Add them "
"and retry."
msgstr ""
"'Point' reference is selected and 'Point' coordinates are missing. Add them "
"and retry."

#: flatcamTools/ToolDblSided.py:350
msgid "There is no Box reference object loaded. Load one and retry."
msgstr "There is no Box reference object loaded. Load one and retry."

#: flatcamTools/ToolDblSided.py:373
msgid "No value or wrong format in Drill Dia entry. Add it and retry."
msgstr "No value or wrong format in Drill Dia entry. Add it and retry."

#: flatcamTools/ToolDblSided.py:380
msgid "There are no Alignment Drill Coordinates to use. Add them and retry."
msgstr "There are no Alignment Drill Coordinates to use. Add them and retry."

#: flatcamTools/ToolDblSided.py:403
msgid "Excellon object with alignment drills created..."
msgstr "Excellon object with alignment drills created..."

#: flatcamTools/ToolDblSided.py:412
msgid "There is no Gerber object loaded ..."
msgstr "There is no Gerber object loaded ..."

#: flatcamTools/ToolDblSided.py:416 flatcamTools/ToolDblSided.py:459
#: flatcamTools/ToolDblSided.py:503
msgid "Only Gerber, Excellon and Geometry objects can be mirrored."
msgstr "Only Gerber, Excellon and Geometry objects can be mirrored."

#: flatcamTools/ToolDblSided.py:426
msgid ""
"'Point' coordinates missing. Using Origin (0, 0) as mirroring reference."
msgstr ""
"'Point' coordinates missing. Using Origin (0, 0) as mirroring reference."

#: flatcamTools/ToolDblSided.py:436 flatcamTools/ToolDblSided.py:480
#: flatcamTools/ToolDblSided.py:517
msgid "There is no Box object loaded ..."
msgstr "There is no Box object loaded ..."

#: flatcamTools/ToolDblSided.py:446 flatcamTools/ToolDblSided.py:490
#: flatcamTools/ToolDblSided.py:527
msgid "was mirrored"
msgstr "was mirrored"

#: flatcamTools/ToolDblSided.py:455
msgid "There is no Excellon object loaded ..."
msgstr "There is no Excellon object loaded ..."

#: flatcamTools/ToolDblSided.py:470
msgid ""
"There are no Point coordinates in the Point field. Add coords and try "
"again ..."
msgstr ""
"There are no Point coordinates in the Point field. Add coords and try "
"again ..."

#: flatcamTools/ToolDblSided.py:499
msgid "There is no Geometry object loaded ..."
msgstr "There is no Geometry object loaded ..."

#: flatcamTools/ToolFilm.py:25
msgid "Film PCB"
msgstr "Film PCB"

#: flatcamTools/ToolFilm.py:56 flatcamTools/ToolImage.py:53
#: flatcamTools/ToolPanelize.py:56 flatcamTools/ToolProperties.py:143
msgid "Object Type"
msgstr "Object Type"

#: flatcamTools/ToolFilm.py:58
msgid ""
"Specify the type of object for which to create the film.\n"
"The object can be of type: Gerber or Geometry.\n"
"The selection here decide the type of objects that will be\n"
"in the Film Object combobox."
msgstr ""
"Specify the type of object for which to create the film.\n"
"The object can be of type: Gerber or Geometry.\n"
"The selection here decide the type of objects that will be\n"
"in the Film Object combobox."

#: flatcamTools/ToolFilm.py:71
msgid "Film Object"
msgstr "Film Object"

#: flatcamTools/ToolFilm.py:73
msgid "Object for which to create the film."
msgstr "Object for which to create the film."

#: flatcamTools/ToolFilm.py:89
msgid "Box Type:"
msgstr "Box Type:"

#: flatcamTools/ToolFilm.py:91
msgid ""
"Specify the type of object to be used as an container for\n"
"film creation. It can be: Gerber or Geometry type.The selection here decide "
"the type of objects that will be\n"
"in the Box Object combobox."
msgstr ""
"Specify the type of object to be used as an container for\n"
"film creation. It can be: Gerber or Geometry type.The selection here decide "
"the type of objects that will be\n"
"in the Box Object combobox."

#: flatcamTools/ToolFilm.py:104 flatcamTools/ToolPanelize.py:126
msgid "Box Object"
msgstr "Box Object"

#: flatcamTools/ToolFilm.py:106
msgid ""
"The actual object that is used a container for the\n"
" selected object for which we create the film.\n"
"Usually it is the PCB outline but it can be also the\n"
"same object for which the film is created."
msgstr ""
"The actual object that is used a container for the\n"
" selected object for which we create the film.\n"
"Usually it is the PCB outline but it can be also the\n"
"same object for which the film is created."

#: flatcamTools/ToolFilm.py:114
msgid "Positive"
msgstr "Positive"

#: flatcamTools/ToolFilm.py:115
msgid "Negative"
msgstr "Negative"

#: flatcamTools/ToolFilm.py:116
msgid "Film Type:"
msgstr "Film Type:"

#: flatcamTools/ToolFilm.py:157
msgid "Save Film"
msgstr "Save Film"

#: flatcamTools/ToolFilm.py:159
msgid ""
"Create a Film for the selected object, within\n"
"the specified box. Does not create a new \n"
" FlatCAM object, but directly save it in SVG format\n"
"which can be opened with Inkscape."
msgstr ""
"Create a Film for the selected object, within\n"
"the specified box. Does not create a new \n"
" FlatCAM object, but directly save it in SVG format\n"
"which can be opened with Inkscape."

#: flatcamTools/ToolFilm.py:231
msgid "No FlatCAM object selected. Load an object for Film and retry."
msgstr "No FlatCAM object selected. Load an object for Film and retry."

#: flatcamTools/ToolFilm.py:238
msgid "No FlatCAM object selected. Load an object for Box and retry."
msgstr "No FlatCAM object selected. Load an object for Box and retry."

#: flatcamTools/ToolFilm.py:260
msgid "Generating Film ..."
msgstr "Generating Film ..."

#: flatcamTools/ToolFilm.py:265 flatcamTools/ToolFilm.py:269
msgid "Export SVG positive"
msgstr "Export SVG positive"

#: flatcamTools/ToolFilm.py:274
msgid "Export SVG positive cancelled."
msgstr "Export SVG positive cancelled."

#: flatcamTools/ToolFilm.py:281 flatcamTools/ToolFilm.py:285
msgid "Export SVG negative"
msgstr "Export SVG negative"

#: flatcamTools/ToolFilm.py:290
msgid "Export SVG negative cancelled."
msgstr "Export SVG negative cancelled."

#: flatcamTools/ToolImage.py:25
msgid "Image as Object"
msgstr "Image as Object"

#: flatcamTools/ToolImage.py:31
msgid "Image to PCB"
msgstr "Image to PCB"

#: flatcamTools/ToolImage.py:55
msgid ""
"Specify the type of object to create from the image.\n"
"It can be of type: Gerber or Geometry."
msgstr ""
"Specify the type of object to create from the image.\n"
"It can be of type: Gerber or Geometry."

#: flatcamTools/ToolImage.py:63
msgid "DPI value"
msgstr "DPI value"

#: flatcamTools/ToolImage.py:65
msgid "Specify a DPI value for the image."
msgstr "Specify a DPI value for the image."

#: flatcamTools/ToolImage.py:72
msgid "Level of detail"
msgstr "Level of detail"

#: flatcamTools/ToolImage.py:81
msgid "Image type"
msgstr "Image type"

#: flatcamTools/ToolImage.py:83
msgid ""
"Choose a method for the image interpretation.\n"
"B/W means a black & white image. Color means a colored image."
msgstr ""
"Choose a method for the image interpretation.\n"
"B/W means a black & white image. Color means a colored image."

#: flatcamTools/ToolImage.py:90 flatcamTools/ToolImage.py:103
#: flatcamTools/ToolImage.py:114 flatcamTools/ToolImage.py:125
msgid "Mask value"
msgstr "Mask value"

#: flatcamTools/ToolImage.py:92
msgid ""
"Mask for monochrome image.\n"
"Takes values between [0 ... 255].\n"
"Decides the level of details to include\n"
"in the resulting geometry.\n"
"0 means no detail and 255 means everything \n"
"(which is totally black)."
msgstr ""
"Mask for monochrome image.\n"
"Takes values between [0 ... 255].\n"
"Decides the level of details to include\n"
"in the resulting geometry.\n"
"0 means no detail and 255 means everything \n"
"(which is totally black)."

#: flatcamTools/ToolImage.py:105
msgid ""
"Mask for RED color.\n"
"Takes values between [0 ... 255].\n"
"Decides the level of details to include\n"
"in the resulting geometry."
msgstr ""
"Mask for RED color.\n"
"Takes values between [0 ... 255].\n"
"Decides the level of details to include\n"
"in the resulting geometry."

#: flatcamTools/ToolImage.py:116
msgid ""
"Mask for GREEN color.\n"
"Takes values between [0 ... 255].\n"
"Decides the level of details to include\n"
"in the resulting geometry."
msgstr ""
"Mask for GREEN color.\n"
"Takes values between [0 ... 255].\n"
"Decides the level of details to include\n"
"in the resulting geometry."

#: flatcamTools/ToolImage.py:127
msgid ""
"Mask for BLUE color.\n"
"Takes values between [0 ... 255].\n"
"Decides the level of details to include\n"
"in the resulting geometry."
msgstr ""
"Mask for BLUE color.\n"
"Takes values between [0 ... 255].\n"
"Decides the level of details to include\n"
"in the resulting geometry."

#: flatcamTools/ToolImage.py:139
msgid "Import image"
msgstr "Import image"

#: flatcamTools/ToolImage.py:141
msgid "Open a image of raster type and then import it in FlatCAM."
msgstr "Open a image of raster type and then import it in FlatCAM."

#: flatcamTools/ToolImage.py:175
msgid "Image Tool"
msgstr "Image Tool"

#: flatcamTools/ToolImage.py:205 flatcamTools/ToolImage.py:208
msgid "Import IMAGE"
msgstr "Import IMAGE"

#: flatcamTools/ToolMeasurement.py:26
msgid "Measurement"
msgstr "Measurement"

#: flatcamTools/ToolMeasurement.py:44
msgid "Those are the units in which the distance is measured."
msgstr "Those are the units in which the distance is measured."

#: flatcamTools/ToolMeasurement.py:45
msgid "METRIC (mm)"
msgstr "METRIC (mm)"

#: flatcamTools/ToolMeasurement.py:45
msgid "INCH (in)"
msgstr "INCH (in)"

#: flatcamTools/ToolMeasurement.py:48
msgid "Start"
msgstr "Start"

#: flatcamTools/ToolMeasurement.py:48 flatcamTools/ToolMeasurement.py:51
msgid "Coords"
msgstr "Coords"

#: flatcamTools/ToolMeasurement.py:49 flatcamTools/ToolMeasurement.py:65
msgid "This is measuring Start point coordinates."
msgstr "This is measuring Start point coordinates."

#: flatcamTools/ToolMeasurement.py:51
msgid "Stop"
msgstr "Stop"

#: flatcamTools/ToolMeasurement.py:52 flatcamTools/ToolMeasurement.py:69
msgid "This is the measuring Stop point coordinates."
msgstr "This is the measuring Stop point coordinates."

#: flatcamTools/ToolMeasurement.py:54
msgid "Dx"
msgstr "Dx"

#: flatcamTools/ToolMeasurement.py:55 flatcamTools/ToolMeasurement.py:73
msgid "This is the distance measured over the X axis."
msgstr "This is the distance measured over the X axis."

#: flatcamTools/ToolMeasurement.py:57
msgid "Dy"
msgstr "Dy"

#: flatcamTools/ToolMeasurement.py:58 flatcamTools/ToolMeasurement.py:77
msgid "This is the distance measured over the Y axis."
msgstr "This is the distance measured over the Y axis."

#: flatcamTools/ToolMeasurement.py:60
msgid "DISTANCE"
msgstr "DISTANCE"

#: flatcamTools/ToolMeasurement.py:61 flatcamTools/ToolMeasurement.py:81
msgid "This is the point to point Euclidian distance."
msgstr "This is the point to point Euclidian distance."

#: flatcamTools/ToolMeasurement.py:83
msgid "Measure"
msgstr "Measure"

#: flatcamTools/ToolMeasurement.py:131
msgid "Meas. Tool"
msgstr "Meas. Tool"

#: flatcamTools/ToolMeasurement.py:176
msgid "MEASURING: Click on the Start point ..."
msgstr "MEASURING: Click on the Start point ..."

#: flatcamTools/ToolMeasurement.py:269
msgid "MEASURING: Click on the Destination point ..."
msgstr "MEASURING: Click on the Destination point ..."

#: flatcamTools/ToolMeasurement.py:277
#, python-brace-format
msgid "MEASURING: Result D(x) = {d_x} | D(y) = {d_y} | Distance = {d_z}"
msgstr "MEASURING: Result D(x) = {d_x} | D(y) = {d_y} | Distance = {d_z}"

#: flatcamTools/ToolMove.py:84
msgid "MOVE: Click on the Start point ..."
msgstr "MOVE: Click on the Start point ..."

#: flatcamTools/ToolMove.py:91
msgid "MOVE action cancelled. No object(s) to move."
msgstr "MOVE action cancelled. No object(s) to move."

#: flatcamTools/ToolMove.py:113
msgid "MOVE: Click on the Destination point ..."
msgstr "MOVE: Click on the Destination point ..."

#: flatcamTools/ToolMove.py:134
msgid "Moving..."
msgstr "Moving..."

#: flatcamTools/ToolMove.py:137
msgid "No object(s) selected."
msgstr "No object(s) selected."

#: flatcamTools/ToolMove.py:162
msgid "ToolMove.on_left_click()"
msgstr "ToolMove.on_left_click()"

#: flatcamTools/ToolMove.py:179
msgid "ToolMove.on_left_click() --> Error when mouse left click."
msgstr "ToolMove.on_left_click() --> Error when mouse left click."

#: flatcamTools/ToolMove.py:215
msgid "Move action cancelled."
msgstr "Move action cancelled."

#: flatcamTools/ToolMove.py:227
msgid "Object(s) not selected"
msgstr "Object(s) not selected"

#: flatcamTools/ToolNonCopperClear.py:26
msgid "Non-Copper Clearing"
msgstr "Non-Copper Clearing"

#: flatcamTools/ToolNonCopperClear.py:71
msgid ""
"Specify the type of object to be cleared of excess copper.\n"
"It can be of type: Gerber or Geometry.\n"
"What is selected here will dictate the kind\n"
"of objects that will populate the 'Object' combobox."
msgstr ""
"Specify the type of object to be cleared of excess copper.\n"
"It can be of type: Gerber or Geometry.\n"
"What is selected here will dictate the kind\n"
"of objects that will populate the 'Object' combobox."

#: flatcamTools/ToolNonCopperClear.py:88
msgid "Object to be cleared of excess copper."
msgstr "Object to be cleared of excess copper."

#: flatcamTools/ToolNonCopperClear.py:98
msgid ""
"Tools pool from which the algorithm\n"
"will pick the ones used for copper clearing."
msgstr ""
"Tools pool from which the algorithm\n"
"will pick the ones used for copper clearing."

#: flatcamTools/ToolNonCopperClear.py:107
msgid "Operation"
msgstr "Operation"

#: flatcamTools/ToolNonCopperClear.py:113
msgid ""
"This is the Tool Number.\n"
"Non copper clearing will start with the tool with the biggest \n"
"diameter, continuing until there are no more tools.\n"
"Only tools that create NCC clearing geometry will still be present\n"
"in the resulting geometry. This is because with some tools\n"
"this function will not be able to create painting geometry."
msgstr ""
"This is the Tool Number.\n"
"Non copper clearing will start with the tool with the biggest \n"
"diameter, continuing until there are no more tools.\n"
"Only tools that create NCC clearing geometry will still be present\n"
"in the resulting geometry. This is because with some tools\n"
"this function will not be able to create painting geometry."

#: flatcamTools/ToolNonCopperClear.py:121
msgid ""
"Tool Diameter. It's value (in current FlatCAM units)\n"
"is the cut width into the material."
msgstr ""
"Tool Diameter. It's value (in current FlatCAM units)\n"
"is the cut width into the material."

#: flatcamTools/ToolNonCopperClear.py:125
msgid ""
"The Tool Type (TT) can be:\n"
"- Circular with 1 ... 4 teeth -> it is informative only. Being circular,\n"
"the cut width in material is exactly the tool diameter.\n"
"- Ball -> informative only and make reference to the Ball type endmill.\n"
"- V-Shape -> it will disable de Z-Cut parameter in the resulting geometry UI "
"form\n"
"and enable two additional UI form fields in the resulting geometry: V-Tip "
"Dia and\n"
"V-Tip Angle. Adjusting those two values will adjust the Z-Cut parameter "
"such\n"
"as the cut width into material will be equal with the value in the Tool "
"Diameter\n"
"column of this table.\n"
"Choosing the 'V-Shape' Tool Type automatically will select the Operation "
"Type\n"
"in the resulting geometry as Isolation."
msgstr ""
"The Tool Type (TT) can be:\n"
"- Circular with 1 ... 4 teeth -> it is informative only. Being circular,\n"
"the cut width in material is exactly the tool diameter.\n"
"- Ball -> informative only and make reference to the Ball type endmill.\n"
"- V-Shape -> it will disable de Z-Cut parameter in the resulting geometry UI "
"form\n"
"and enable two additional UI form fields in the resulting geometry: V-Tip "
"Dia and\n"
"V-Tip Angle. Adjusting those two values will adjust the Z-Cut parameter "
"such\n"
"as the cut width into material will be equal with the value in the Tool "
"Diameter\n"
"column of this table.\n"
"Choosing the 'V-Shape' Tool Type automatically will select the Operation "
"Type\n"
"in the resulting geometry as Isolation."

#: flatcamTools/ToolNonCopperClear.py:138
msgid ""
"The 'Operation' can be:\n"
"- Isolation -> will ensure that the non-copper clearing is always complete.\n"
"If it's not successful then the non-copper clearing will fail, too.\n"
"- Clear -> the regular non-copper clearing."
msgstr ""
"The 'Operation' can be:\n"
"- Isolation -> will ensure that the non-copper clearing is always complete.\n"
"If it's not successful then the non-copper clearing will fail, too.\n"
"- Clear -> the regular non-copper clearing."

#: flatcamTools/ToolNonCopperClear.py:191
msgid "Tool Selection"
msgstr "Tool Selection"

#: flatcamTools/ToolNonCopperClear.py:214
msgid "Diameter for the new tool to add in the Tool Table"
msgstr "Diameter for the new tool to add in the Tool Table"

#: flatcamTools/ToolNonCopperClear.py:251 flatcamTools/ToolPaint.py:190
#: flatcamTools/ToolSolderPaste.py:123
msgid ""
"Delete a selection of tools in the Tool Table\n"
"by first selecting a row(s) in the Tool Table."
msgstr ""
"Delete a selection of tools in the Tool Table\n"
"by first selecting a row(s) in the Tool Table."

#: flatcamTools/ToolNonCopperClear.py:400 flatcamTools/ToolPaint.py:299
msgid "Area Selection"
msgstr "Area Selection"

#: flatcamTools/ToolNonCopperClear.py:401 flatcamTools/ToolPaint.py:301
msgid "Reference Object"
msgstr "Reference Object"

#: flatcamTools/ToolNonCopperClear.py:403
msgid "Reference:"
msgstr "Reference:"

#: flatcamTools/ToolNonCopperClear.py:418 flatcamTools/ToolPaint.py:316
msgid "Ref. Type"
msgstr "Ref. Type"

#: flatcamTools/ToolNonCopperClear.py:420
msgid ""
"The type of FlatCAM object to be used as non copper clearing reference.\n"
"It can be Gerber, Excellon or Geometry."
msgstr ""
"The type of FlatCAM object to be used as non copper clearing reference.\n"
"It can be Gerber, Excellon or Geometry."

#: flatcamTools/ToolNonCopperClear.py:429 flatcamTools/ToolPaint.py:327
msgid "Ref. Object"
msgstr "Ref. Object"

#: flatcamTools/ToolNonCopperClear.py:431 flatcamTools/ToolPaint.py:329
msgid "The FlatCAM object to be used as non copper clearing reference."
msgstr "The FlatCAM object to be used as non copper clearing reference."

#: flatcamTools/ToolNonCopperClear.py:910 flatcamTools/ToolPaint.py:709
#: flatcamTools/ToolSolderPaste.py:769
msgid "Please enter a tool diameter to add, in Float format."
msgstr "Please enter a tool diameter to add, in Float format."

#: flatcamTools/ToolNonCopperClear.py:944 flatcamTools/ToolPaint.py:734
msgid "Adding tool cancelled. Tool already in Tool Table."
msgstr "Adding tool cancelled. Tool already in Tool Table."

#: flatcamTools/ToolNonCopperClear.py:949 flatcamTools/ToolPaint.py:740
msgid "New tool added to Tool Table."
msgstr "New tool added to Tool Table."

#: flatcamTools/ToolNonCopperClear.py:993 flatcamTools/ToolPaint.py:786
msgid "Tool from Tool Table was edited."
msgstr "Tool from Tool Table was edited."

#: flatcamTools/ToolNonCopperClear.py:1004 flatcamTools/ToolPaint.py:798
#: flatcamTools/ToolSolderPaste.py:860
msgid "Edit cancelled. New diameter value is already in the Tool Table."
msgstr "Edit cancelled. New diameter value is already in the Tool Table."

#: flatcamTools/ToolNonCopperClear.py:1044 flatcamTools/ToolPaint.py:896
msgid "Delete failed. Select a tool to delete."
msgstr "Delete failed. Select a tool to delete."

#: flatcamTools/ToolNonCopperClear.py:1049 flatcamTools/ToolPaint.py:902
msgid "Tool(s) deleted from Tool Table."
msgstr "Tool(s) deleted from Tool Table."

#: flatcamTools/ToolNonCopperClear.py:1057 flatcamTools/ToolPaint.py:910
msgid "on_paint_button_click"
msgstr "on_paint_button_click"

#: flatcamTools/ToolNonCopperClear.py:1071
msgid "Overlap value must be between 0 (inclusive) and 1 (exclusive), "
msgstr "Overlap value must be between 0 (inclusive) and 1 (exclusive), "

#: flatcamTools/ToolNonCopperClear.py:1107
msgid "Wrong Tool Dia value format entered, use a number."
msgstr "Wrong Tool Dia value format entered, use a number."

#: flatcamTools/ToolNonCopperClear.py:1116 flatcamTools/ToolPaint.py:985
msgid "No selected tools in Tool Table."
msgstr "No selected tools in Tool Table."

#: flatcamTools/ToolNonCopperClear.py:1141
msgid "Click the start point of the area."
msgstr "Click the start point of the area."

#: flatcamTools/ToolNonCopperClear.py:1152 flatcamTools/ToolPaint.py:1041
msgid "Click the end point of the paint area."
msgstr "Click the end point of the paint area."

#: flatcamTools/ToolNonCopperClear.py:1158 flatcamTools/ToolPaint.py:1047
msgid "Zone added. Click to start adding next zone or right click to finish."
msgstr "Zone added. Click to start adding next zone or right click to finish."

#: flatcamTools/ToolNonCopperClear.py:1326
msgid "Non-Copper clearing ..."
msgstr "Non-Copper clearing ..."

#: flatcamTools/ToolNonCopperClear.py:1335
msgid "NCC Tool started. Reading parameters."
msgstr "NCC Tool started. Reading parameters."

#: flatcamTools/ToolNonCopperClear.py:1405
msgid "NCC Tool. Preparing non-copper polygons."
msgstr "NCC Tool. Preparing non-copper polygons."

#: flatcamTools/ToolNonCopperClear.py:1433 flatcamTools/ToolPaint.py:2452
msgid "No object available."
msgstr "No object available."

#: flatcamTools/ToolNonCopperClear.py:1475
msgid "The reference object type is not supported."
msgstr "The reference object type is not supported."

#: flatcamTools/ToolNonCopperClear.py:1497
msgid ""
"NCC Tool. Finished non-copper polygons. Normal copper clearing task started."
msgstr ""
"NCC Tool. Finished non-copper polygons. Normal copper clearing task started."

#: flatcamTools/ToolNonCopperClear.py:1529
msgid "NCC Tool. Calculate 'empty' area."
msgstr "NCC Tool. Calculate 'empty' area."

#: flatcamTools/ToolNonCopperClear.py:1544
#: flatcamTools/ToolNonCopperClear.py:1638
#: flatcamTools/ToolNonCopperClear.py:1650
#: flatcamTools/ToolNonCopperClear.py:1877
#: flatcamTools/ToolNonCopperClear.py:1969
#: flatcamTools/ToolNonCopperClear.py:1981
msgid "Buffering finished"
msgstr "Buffering finished"

#: flatcamTools/ToolNonCopperClear.py:1657
#: flatcamTools/ToolNonCopperClear.py:1987
msgid "The selected object is not suitable for copper clearing."
msgstr "The selected object is not suitable for copper clearing."

#: flatcamTools/ToolNonCopperClear.py:1662
#: flatcamTools/ToolNonCopperClear.py:1992
msgid "Could not get the extent of the area to be non copper cleared."
msgstr "Could not get the extent of the area to be non copper cleared."

#: flatcamTools/ToolNonCopperClear.py:1669
msgid "NCC Tool. Finished calculation of 'empty' area."
msgstr "NCC Tool. Finished calculation of 'empty' area."

#: flatcamTools/ToolNonCopperClear.py:1679
#: flatcamTools/ToolNonCopperClear.py:2017
msgid "NCC Tool clearing with tool diameter = "
msgstr "NCC Tool clearing with tool diameter = "

#: flatcamTools/ToolNonCopperClear.py:1682
#: flatcamTools/ToolNonCopperClear.py:2020
msgid "started."
msgstr "started."

#: flatcamTools/ToolNonCopperClear.py:1820 flatcamTools/ToolPaint.py:1418
#: flatcamTools/ToolPaint.py:1753 flatcamTools/ToolPaint.py:1901
#: flatcamTools/ToolPaint.py:2219 flatcamTools/ToolPaint.py:2371
msgid ""
"There is no Painting Geometry in the file.\n"
"Usually it means that the tool diameter is too big for the painted "
"geometry.\n"
"Change the painting parameters and try again."
msgstr ""
"There is no Painting Geometry in the file.\n"
"Usually it means that the tool diameter is too big for the painted "
"geometry.\n"
"Change the painting parameters and try again."

#: flatcamTools/ToolNonCopperClear.py:1830
msgid "NCC Tool clear all done."
msgstr "NCC Tool clear all done."

#: flatcamTools/ToolNonCopperClear.py:1832
msgid "NCC Tool clear all done but the copper features isolation is broken for"
msgstr ""
"NCC Tool clear all done but the copper features isolation is broken for"

#: flatcamTools/ToolNonCopperClear.py:1835
#: flatcamTools/ToolNonCopperClear.py:2183
msgid "tools"
msgstr "tools"

#: flatcamTools/ToolNonCopperClear.py:2179
msgid "NCC Tool Rest Machining clear all done."
msgstr "NCC Tool Rest Machining clear all done."

#: flatcamTools/ToolNonCopperClear.py:2182
msgid ""
"NCC Tool Rest Machining clear all done but the copper features isolation is "
"broken for"
msgstr ""
"NCC Tool Rest Machining clear all done but the copper features isolation is "
"broken for"

#: flatcamTools/ToolNonCopperClear.py:2609
msgid ""
"Try to use the Buffering Type = Full in Preferences -> Gerber General. "
"Reload the Gerber file after this change."
msgstr ""
"Try to use the Buffering Type = Full in Preferences -> Gerber General. "
"Reload the Gerber file after this change."

#: flatcamTools/ToolPDF.py:152 flatcamTools/ToolPDF.py:156
msgid "Open PDF"
msgstr "Open PDF"

#: flatcamTools/ToolPDF.py:159
msgid "Open PDF cancelled"
msgstr "Open PDF cancelled"

#: flatcamTools/ToolPDF.py:190
msgid "Parsing PDF file ..."
msgstr "Parsing PDF file ..."

#: flatcamTools/ToolPDF.py:273 flatcamTools/ToolPDF.py:348
#, python-format
msgid "Rendering PDF layer #%d ..."
msgstr "Rendering PDF layer #%d ..."

#: flatcamTools/ToolPDF.py:278 flatcamTools/ToolPDF.py:353
msgid "Open PDF file failed."
msgstr "Open PDF file failed."

#: flatcamTools/ToolPDF.py:284 flatcamTools/ToolPDF.py:358
msgid "Rendered"
msgstr "Rendered"

#: flatcamTools/ToolPaint.py:70
msgid ""
"Specify the type of object to be painted.\n"
"It can be of type: Gerber or Geometry.\n"
"What is selected here will dictate the kind\n"
"of objects that will populate the 'Object' combobox."
msgstr ""
"Specify the type of object to be painted.\n"
"It can be of type: Gerber or Geometry.\n"
"What is selected here will dictate the kind\n"
"of objects that will populate the 'Object' combobox."

#: flatcamTools/ToolPaint.py:87
msgid "Object to be painted."
msgstr "Object to be painted."

#: flatcamTools/ToolPaint.py:97
msgid ""
"Tools pool from which the algorithm\n"
"will pick the ones used for painting."
msgstr ""
"Tools pool from which the algorithm\n"
"will pick the ones used for painting."

#: flatcamTools/ToolPaint.py:112
msgid ""
"This is the Tool Number.\n"
"Painting will start with the tool with the biggest diameter,\n"
"continuing until there are no more tools.\n"
"Only tools that create painting geometry will still be present\n"
"in the resulting geometry. This is because with some tools\n"
"this function will not be able to create painting geometry."
msgstr ""
"This is the Tool Number.\n"
"Painting will start with the tool with the biggest diameter,\n"
"continuing until there are no more tools.\n"
"Only tools that create painting geometry will still be present\n"
"in the resulting geometry. This is because with some tools\n"
"this function will not be able to create painting geometry."

#: flatcamTools/ToolPaint.py:124
msgid ""
"The Tool Type (TT) can be:<BR>- <B>Circular</B> with 1 ... 4 teeth -> it is "
"informative only. Being circular, <BR>the cut width in material is exactly "
"the tool diameter.<BR>- <B>Ball</B> -> informative only and make reference "
"to the Ball type endmill.<BR>- <B>V-Shape</B> -> it will disable de Z-Cut "
"parameter in the resulting geometry UI form and enable two additional UI "
"form fields in the resulting geometry: V-Tip Dia and V-Tip Angle. Adjusting "
"those two values will adjust the Z-Cut parameter such as the cut width into "
"material will be equal with the value in the Tool Diameter column of this "
"table.<BR>Choosing the <B>V-Shape</B> Tool Type automatically will select "
"the Operation Type in the resulting geometry as Isolation."
msgstr ""
"The Tool Type (TT) can be:<BR>- <B>Circular</B> with 1 ... 4 teeth -> it is "
"informative only. Being circular, <BR>the cut width in material is exactly "
"the tool diameter.<BR>- <B>Ball</B> -> informative only and make reference "
"to the Ball type endmill.<BR>- <B>V-Shape</B> -> it will disable de Z-Cut "
"parameter in the resulting geometry UI form and enable two additional UI "
"form fields in the resulting geometry: V-Tip Dia and V-Tip Angle. Adjusting "
"those two values will adjust the Z-Cut parameter such as the cut width into "
"material will be equal with the value in the Tool Diameter column of this "
"table.<BR>Choosing the <B>V-Shape</B> Tool Type automatically will select "
"the Operation Type in the resulting geometry as Isolation."

#: flatcamTools/ToolPaint.py:164
msgid "Diameter for the new tool."
msgstr "Diameter for the new tool."

#: flatcamTools/ToolPaint.py:239
msgid ""
"Algorithm for painting:\n"
"- Standard: Fixed step inwards.\n"
"- Seed-based: Outwards from seed.\n"
"- Line-based: Parallel lines."
msgstr ""
"Algorithm for painting:\n"
"- Standard: Fixed step inwards.\n"
"- Seed-based: Outwards from seed.\n"
"- Line-based: Parallel lines."

#: flatcamTools/ToolPaint.py:273
msgid ""
"If checked, use 'rest machining'.\n"
"Basically it will clear copper outside PCB features,\n"
"using the biggest tool and continue with the next tools,\n"
"from bigger to smaller, to clear areas of copper that\n"
"could not be cleared by previous tool, until there is\n"
"no more copper to clear or there are no more tools.\n"
"\n"
"If not checked, use the standard algorithm."
msgstr ""
"If checked, use 'rest machining'.\n"
"Basically it will clear copper outside PCB features,\n"
"using the biggest tool and continue with the next tools,\n"
"from bigger to smaller, to clear areas of copper that\n"
"could not be cleared by previous tool, until there is\n"
"no more copper to clear or there are no more tools.\n"
"\n"
"If not checked, use the standard algorithm."

#: flatcamTools/ToolPaint.py:298
msgid "Single Polygon"
msgstr "Single Polygon"

#: flatcamTools/ToolPaint.py:300
msgid "All Polygons"
msgstr "All Polygons"

#: flatcamTools/ToolPaint.py:318
msgid ""
"The type of FlatCAM object to be used as paint reference.\n"
"It can be Gerber, Excellon or Geometry."
msgstr ""
"The type of FlatCAM object to be used as paint reference.\n"
"It can be Gerber, Excellon or Geometry."

#: flatcamTools/ToolPaint.py:343
msgid "Create Paint Geometry"
msgstr "Create Paint Geometry"

#: flatcamTools/ToolPaint.py:345
msgid ""
"- 'Area Selection' - left mouse click to start selection of the area to be "
"painted.\n"
"Keeping a modifier key pressed (CTRL or SHIFT) will allow to add multiple "
"areas.\n"
"- 'All Polygons' - the Paint will start after click.\n"
"- 'Reference Object' -  will do non copper clearing within the area\n"
"specified by another object."
msgstr ""
"- 'Area Selection' - left mouse click to start selection of the area to be "
"painted.\n"
"Keeping a modifier key pressed (CTRL or SHIFT) will allow to add multiple "
"areas.\n"
"- 'All Polygons' - the Paint will start after click.\n"
"- 'Reference Object' -  will do non copper clearing within the area\n"
"specified by another object."

#: flatcamTools/ToolPaint.py:916
msgid "Paint Tool. Reading parameters."
msgstr "Paint Tool. Reading parameters."

#: flatcamTools/ToolPaint.py:931
msgid "Overlap value must be between 0 (inclusive) and 1 (exclusive)"
msgstr "Overlap value must be between 0 (inclusive) and 1 (exclusive)"

#: flatcamTools/ToolPaint.py:935 flatcamTools/ToolPaint.py:998
msgid "Click inside the desired polygon."
msgstr "Click inside the desired polygon."

#: flatcamTools/ToolPaint.py:949
#, python-format
msgid "Could not retrieve object: %s"
msgstr "Could not retrieve object: %s"

#: flatcamTools/ToolPaint.py:963
msgid "Can't do Paint on MultiGeo geometries"
msgstr "Can't do Paint on MultiGeo geometries"

#: flatcamTools/ToolPaint.py:1007 flatcamTools/ToolPaint.py:1245
msgid "Painting polygon..."
msgstr "Painting polygon..."

#: flatcamTools/ToolPaint.py:1029
msgid "Click the start point of the paint area."
msgstr "Click the start point of the paint area."

#: flatcamTools/ToolPaint.py:1203 flatcamTools/ToolPaint.py:1206
#: flatcamTools/ToolPaint.py:1208
msgid "Paint Tool. Normal painting polygon task started."
msgstr "Paint Tool. Normal painting polygon task started."

#: flatcamTools/ToolPaint.py:1204 flatcamTools/ToolPaint.py:1599
#: flatcamTools/ToolPaint.py:1774 flatcamTools/ToolPaint.py:2061
#: flatcamTools/ToolPaint.py:2240
msgid "Buffering geometry..."
msgstr "Buffering geometry..."

#: flatcamTools/ToolPaint.py:1242
msgid "No polygon found."
msgstr "No polygon found."

#: flatcamTools/ToolPaint.py:1246
msgid "Paint Tool. Painting polygon at location"
msgstr "Paint Tool. Painting polygon at location"

#: flatcamTools/ToolPaint.py:1329
msgid "Geometry could not be painted completely"
msgstr "Geometry could not be painted completely"

#: flatcamTools/ToolPaint.py:1374
msgid ""
"Could not do Paint. Try a different combination of parameters. Or a "
"different strategy of paint"
msgstr ""
"Could not do Paint. Try a different combination of parameters. Or a "
"different strategy of paint"

#: flatcamTools/ToolPaint.py:1423
msgid "Paint Single Done."
msgstr "Paint Single Done."

#: flatcamTools/ToolPaint.py:1448
msgid "PaintTool.paint_poly()"
msgstr "PaintTool.paint_poly()"

#: flatcamTools/ToolPaint.py:1455 flatcamTools/ToolPaint.py:1929
#: flatcamTools/ToolPaint.py:2399
msgid "Polygon Paint started ..."
msgstr "Polygon Paint started ..."

#: flatcamTools/ToolPaint.py:1516 flatcamTools/ToolPaint.py:1991
msgid "Painting polygons..."
msgstr "Painting polygons..."

#: flatcamTools/ToolPaint.py:1598 flatcamTools/ToolPaint.py:1601
#: flatcamTools/ToolPaint.py:1603
msgid "Paint Tool. Normal painting all task started."
msgstr "Paint Tool. Normal painting all task started."

#: flatcamTools/ToolPaint.py:1637 flatcamTools/ToolPaint.py:1807
#: flatcamTools/ToolPaint.py:2106 flatcamTools/ToolPaint.py:2280
msgid "Painting with tool diameter = "
msgstr "Painting with tool diameter = "

#: flatcamTools/ToolPaint.py:1640 flatcamTools/ToolPaint.py:1810
#: flatcamTools/ToolPaint.py:2109 flatcamTools/ToolPaint.py:2283
msgid "started"
msgstr "started"

#: flatcamTools/ToolPaint.py:1702 flatcamTools/ToolPaint.py:1856
#: flatcamTools/ToolPaint.py:2169 flatcamTools/ToolPaint.py:2327
msgid ""
"Could not do Paint All. Try a different combination of parameters. Or a "
"different Method of paint"
msgstr ""
"Could not do Paint All. Try a different combination of parameters. Or a "
"different Method of paint"

#: flatcamTools/ToolPaint.py:1762
msgid "Paint All Done."
msgstr "Paint All Done."

#: flatcamTools/ToolPaint.py:1773 flatcamTools/ToolPaint.py:1776
#: flatcamTools/ToolPaint.py:1778
msgid "Paint Tool. Rest machining painting all task started."
msgstr "Paint Tool. Rest machining painting all task started."

#: flatcamTools/ToolPaint.py:1910 flatcamTools/ToolPaint.py:2380
msgid "Paint All with Rest-Machining done."
msgstr "Paint All with Rest-Machining done."

#: flatcamTools/ToolPaint.py:2060 flatcamTools/ToolPaint.py:2063
#: flatcamTools/ToolPaint.py:2065
msgid "Paint Tool. Normal painting area task started."
msgstr "Paint Tool. Normal painting area task started."

#: flatcamTools/ToolPaint.py:2228
msgid "Paint Area Done."
msgstr "Paint Area Done."

#: flatcamTools/ToolPaint.py:2239 flatcamTools/ToolPaint.py:2242
#: flatcamTools/ToolPaint.py:2244
msgid "Paint Tool. Rest machining painting area task started."
msgstr "Paint Tool. Rest machining painting area task started."

#: flatcamTools/ToolPanelize.py:25
msgid "Panelize PCB"
msgstr "Panelize PCB"

#: flatcamTools/ToolPanelize.py:58
msgid ""
"Specify the type of object to be panelized\n"
"It can be of type: Gerber, Excellon or Geometry.\n"
"The selection here decide the type of objects that will be\n"
"in the Object combobox."
msgstr ""
"Specify the type of object to be panelized\n"
"It can be of type: Gerber, Excellon or Geometry.\n"
"The selection here decide the type of objects that will be\n"
"in the Object combobox."

#: flatcamTools/ToolPanelize.py:73
msgid ""
"Object to be panelized. This means that it will\n"
"be duplicated in an array of rows and columns."
msgstr ""
"Object to be panelized. This means that it will\n"
"be duplicated in an array of rows and columns."

#: flatcamTools/ToolPanelize.py:86
msgid "Penelization Reference"
msgstr "Penelization Reference"

#: flatcamTools/ToolPanelize.py:88
msgid ""
"Choose the reference for panelization:\n"
"- Object = the bounding box of a different object\n"
"- Bounding Box = the bounding box of the object to be panelized\n"
"\n"
"The reference is useful when doing panelization for more than one\n"
"object. The spacings (really offsets) will be applied in reference\n"
"to this reference object therefore maintaining the panelized\n"
"objects in sync."
msgstr ""
"Choose the reference for panelization:\n"
"- Object = the bounding box of a different object\n"
"- Bounding Box = the bounding box of the object to be panelized\n"
"\n"
"The reference is useful when doing panelization for more than one\n"
"object. The spacings (really offsets) will be applied in reference\n"
"to this reference object therefore maintaining the panelized\n"
"objects in sync."

#: flatcamTools/ToolPanelize.py:111
msgid "Box Type"
msgstr "Box Type"

#: flatcamTools/ToolPanelize.py:113
msgid ""
"Specify the type of object to be used as an container for\n"
"panelization. It can be: Gerber or Geometry type.\n"
"The selection here decide the type of objects that will be\n"
"in the Box Object combobox."
msgstr ""
"Specify the type of object to be used as an container for\n"
"panelization. It can be: Gerber or Geometry type.\n"
"The selection here decide the type of objects that will be\n"
"in the Box Object combobox."

#: flatcamTools/ToolPanelize.py:128
msgid ""
"The actual object that is used a container for the\n"
" selected object that is to be panelized."
msgstr ""
"The actual object that is used a container for the\n"
" selected object that is to be panelized."

#: flatcamTools/ToolPanelize.py:134
msgid "Panel Data"
msgstr "Panel Data"

#: flatcamTools/ToolPanelize.py:136
msgid ""
"This informations will shape the resulting panel.\n"
"The number of rows and columns will set how many\n"
"duplicates of the original geometry will be generated.\n"
"\n"
"The spacings will set the distance between any two\n"
"elements of the panel array."
msgstr ""
"This informations will shape the resulting panel.\n"
"The number of rows and columns will set how many\n"
"duplicates of the original geometry will be generated.\n"
"\n"
"The spacings will set the distance between any two\n"
"elements of the panel array."

#: flatcamTools/ToolPanelize.py:185
msgid ""
"Choose the type of object for the panel object:\n"
"- Geometry\n"
"- Gerber"
msgstr ""
"Choose the type of object for the panel object:\n"
"- Geometry\n"
"- Gerber"

#: flatcamTools/ToolPanelize.py:193
msgid "Constrain panel within"
msgstr "Constrain panel within"

#: flatcamTools/ToolPanelize.py:227
msgid "Panelize Object"
msgstr "Panelize Object"

#: flatcamTools/ToolPanelize.py:229
msgid ""
"Panelize the specified object around the specified box.\n"
"In other words it creates multiple copies of the source object,\n"
"arranged in a 2D array of rows and columns."
msgstr ""
"Panelize the specified object around the specified box.\n"
"In other words it creates multiple copies of the source object,\n"
"arranged in a 2D array of rows and columns."

#: flatcamTools/ToolPanelize.py:277
msgid "Panel. Tool"
msgstr "Panel. Tool"

#: flatcamTools/ToolPanelize.py:465
msgid "Columns or Rows are zero value. Change them to a positive integer."
msgstr "Columns or Rows are zero value. Change them to a positive integer."

#: flatcamTools/ToolPanelize.py:490
msgid "Generating panel ... "
msgstr "Generating panel ... "

#: flatcamTools/ToolPanelize.py:776 flatcamTools/ToolPanelize.py:788
msgid "Generating panel ..."
msgstr "Generating panel ..."

#: flatcamTools/ToolPanelize.py:776
msgid "Adding the Gerber code."
msgstr "Adding the Gerber code."

#: flatcamTools/ToolPanelize.py:788
msgid "Spawning copies"
msgstr "Spawning copies"

#: flatcamTools/ToolPanelize.py:798
msgid "Panel done..."
msgstr "Panel done..."

#: flatcamTools/ToolPanelize.py:801
#, python-brace-format
msgid ""
"{text} Too big for the constrain area. Final panel has {col} columns and "
"{row} rows"
msgstr ""
"{text} Too big for the constrain area. Final panel has {col} columns and "
"{row} rows"

#: flatcamTools/ToolPanelize.py:805
msgid "Working..."
msgstr "Working..."

#: flatcamTools/ToolPanelize.py:810
msgid "Panel created successfully."
msgstr "Panel created successfully."

#: flatcamTools/ToolPcbWizard.py:32
msgid "PcbWizard Import Tool"
msgstr "PcbWizard Import Tool"

#: flatcamTools/ToolPcbWizard.py:40
msgid "Import 2-file Excellon"
msgstr "Import 2-file Excellon"

#: flatcamTools/ToolPcbWizard.py:51
msgid "Load files"
msgstr "Load files"

#: flatcamTools/ToolPcbWizard.py:57
msgid "Excellon file"
msgstr "Excellon file"

#: flatcamTools/ToolPcbWizard.py:59
msgid ""
"Load the Excellon file.\n"
"Usually it has a .DRL extension"
msgstr ""
"Load the Excellon file.\n"
"Usually it has a .DRL extension"

#: flatcamTools/ToolPcbWizard.py:65
msgid "INF file"
msgstr "INF file"

#: flatcamTools/ToolPcbWizard.py:67
msgid "Load the INF file."
msgstr "Load the INF file."

#: flatcamTools/ToolPcbWizard.py:79
msgid "Tool Number"
msgstr "Tool Number"

#: flatcamTools/ToolPcbWizard.py:81
msgid "Tool diameter in file units."
msgstr "Tool diameter in file units."

#: flatcamTools/ToolPcbWizard.py:87
msgid "Excellon format"
msgstr "Excellon format"

#: flatcamTools/ToolPcbWizard.py:95
msgid "Int. digits"
msgstr "Int. digits"

#: flatcamTools/ToolPcbWizard.py:97
msgid "The number of digits for the integral part of the coordinates."
msgstr "The number of digits for the integral part of the coordinates."

#: flatcamTools/ToolPcbWizard.py:104
msgid "Frac. digits"
msgstr "Frac. digits"

#: flatcamTools/ToolPcbWizard.py:106
msgid "The number of digits for the fractional part of the coordinates."
msgstr "The number of digits for the fractional part of the coordinates."

#: flatcamTools/ToolPcbWizard.py:113
msgid "No Suppression"
msgstr "No Suppression"

#: flatcamTools/ToolPcbWizard.py:114
msgid "Zeros supp."
msgstr "Zeros supp."

#: flatcamTools/ToolPcbWizard.py:116
msgid ""
"The type of zeros suppression used.\n"
"Can be of type:\n"
"- LZ = leading zeros are kept\n"
"- TZ = trailing zeros are kept\n"
"- No Suppression = no zero suppression"
msgstr ""
"The type of zeros suppression used.\n"
"Can be of type:\n"
"- LZ = leading zeros are kept\n"
"- TZ = trailing zeros are kept\n"
"- No Suppression = no zero suppression"

#: flatcamTools/ToolPcbWizard.py:129
msgid ""
"The type of units that the coordinates and tool\n"
"diameters are using. Can be INCH or MM."
msgstr ""
"The type of units that the coordinates and tool\n"
"diameters are using. Can be INCH or MM."

#: flatcamTools/ToolPcbWizard.py:136
msgid "Import Excellon"
msgstr "Import Excellon"

#: flatcamTools/ToolPcbWizard.py:138
msgid ""
"Import in FlatCAM an Excellon file\n"
"that store it's information's in 2 files.\n"
"One usually has .DRL extension while\n"
"the other has .INF extension."
msgstr ""
"Import in FlatCAM an Excellon file\n"
"that store it's information's in 2 files.\n"
"One usually has .DRL extension while\n"
"the other has .INF extension."

#: flatcamTools/ToolPcbWizard.py:197
msgid "PCBWizard Tool"
msgstr "PCBWizard Tool"

#: flatcamTools/ToolPcbWizard.py:291 flatcamTools/ToolPcbWizard.py:295
msgid "Load PcbWizard Excellon file"
msgstr "Load PcbWizard Excellon file"

#: flatcamTools/ToolPcbWizard.py:314 flatcamTools/ToolPcbWizard.py:318
msgid "Load PcbWizard INF file"
msgstr "Load PcbWizard INF file"

#: flatcamTools/ToolPcbWizard.py:366
msgid ""
"The INF file does not contain the tool table.\n"
"Try to open the Excellon file from File -> Open -> Excellon\n"
"and edit the drill diameters manually."
msgstr ""
"The INF file does not contain the tool table.\n"
"Try to open the Excellon file from File -> Open -> Excellon\n"
"and edit the drill diameters manually."

#: flatcamTools/ToolPcbWizard.py:387
msgid "PcbWizard .INF file loaded."
msgstr "PcbWizard .INF file loaded."

#: flatcamTools/ToolPcbWizard.py:392
msgid "Main PcbWizard Excellon file loaded."
msgstr "Main PcbWizard Excellon file loaded."

#: flatcamTools/ToolPcbWizard.py:431
msgid "Cannot parse file"
msgstr "Cannot parse file"

#: flatcamTools/ToolPcbWizard.py:456
msgid "Importing Excellon."
msgstr "Importing Excellon."

#: flatcamTools/ToolPcbWizard.py:463
msgid "Import Excellon file failed."
msgstr "Import Excellon file failed."

#: flatcamTools/ToolPcbWizard.py:471
msgid "Imported"
msgstr "Imported"

#: flatcamTools/ToolPcbWizard.py:475
msgid "Excellon merging is in progress. Please wait..."
msgstr "Excellon merging is in progress. Please wait..."

#: flatcamTools/ToolPcbWizard.py:478
msgid "The imported Excellon file is None."
msgstr "The imported Excellon file is None."

#: flatcamTools/ToolProperties.py:112
msgid "Properties Tool was not displayed. No object selected."
msgstr "Properties Tool was not displayed. No object selected."

#: flatcamTools/ToolProperties.py:120
msgid "Object Properties are displayed."
msgstr "Object Properties are displayed."

#: flatcamTools/ToolProperties.py:121
msgid "Properties Tool"
msgstr "Properties Tool"

#: flatcamTools/ToolProperties.py:130
msgid "TYPE"
msgstr "TYPE"

#: flatcamTools/ToolProperties.py:131
msgid "NAME"
msgstr "NAME"

#: flatcamTools/ToolProperties.py:132
msgid "Dimensions"
msgstr "Dimensions"

#: flatcamTools/ToolProperties.py:135
msgid "Options"
msgstr "Options"

#: flatcamTools/ToolProperties.py:146
msgid "Geo Type"
msgstr "Geo Type"

#: flatcamTools/ToolProperties.py:147
msgid "Single-Geo"
msgstr "Single-Geo"

#: flatcamTools/ToolProperties.py:147
msgid "Multi-Geo"
msgstr "Multi-Geo"

#: flatcamTools/ToolProperties.py:155
msgid "Calculating dimensions ... Please wait."
msgstr "Calculating dimensions ... Please wait."

#: flatcamTools/ToolProperties.py:246
msgid "Inch"
msgstr "Inch"

#: flatcamTools/ToolProperties.py:247
msgid "Metric"
msgstr "Metric"

#: flatcamTools/ToolProperties.py:298 flatcamTools/ToolProperties.py:312
#: flatcamTools/ToolProperties.py:315 flatcamTools/ToolProperties.py:318
msgid "Present"
msgstr "Present"

#: flatcamTools/ToolProperties.py:352
msgid "Width"
msgstr "Width"

#: flatcamTools/ToolProperties.py:357 flatcamTools/ToolProperties.py:361
msgid "Box Area"
msgstr "Box Area"

#: flatcamTools/ToolProperties.py:358 flatcamTools/ToolProperties.py:362
msgid "Convex_Hull Area"
msgstr "Convex_Hull Area"

#: flatcamTools/ToolShell.py:70 flatcamTools/ToolShell.py:72
msgid "...proccessing..."
msgstr "...proccessing..."

#: flatcamTools/ToolSolderPaste.py:37
msgid "Solder Paste Tool"
msgstr "Solder Paste Tool"

#: flatcamTools/ToolSolderPaste.py:65
msgid "Gerber Solder paste object.                        "
msgstr "Gerber Solder paste object.                        "

#: flatcamTools/ToolSolderPaste.py:72
msgid ""
"Tools pool from which the algorithm\n"
"will pick the ones used for dispensing solder paste."
msgstr ""
"Tools pool from which the algorithm\n"
"will pick the ones used for dispensing solder paste."

#: flatcamTools/ToolSolderPaste.py:87
msgid ""
"This is the Tool Number.\n"
"The solder dispensing will start with the tool with the biggest \n"
"diameter, continuing until there are no more Nozzle tools.\n"
"If there are no longer tools but there are still pads not covered\n"
" with solder paste, the app will issue a warning message box."
msgstr ""
"This is the Tool Number.\n"
"The solder dispensing will start with the tool with the biggest \n"
"diameter, continuing until there are no more Nozzle tools.\n"
"If there are no longer tools but there are still pads not covered\n"
" with solder paste, the app will issue a warning message box."

#: flatcamTools/ToolSolderPaste.py:94
msgid ""
"Nozzle tool Diameter. It's value (in current FlatCAM units)\n"
"is the width of the solder paste dispensed."
msgstr ""
"Nozzle tool Diameter. It's value (in current FlatCAM units)\n"
"is the width of the solder paste dispensed."

#: flatcamTools/ToolSolderPaste.py:101
msgid "New Nozzle Tool"
msgstr "New Nozzle Tool"

#: flatcamTools/ToolSolderPaste.py:117
msgid ""
"Add a new nozzle tool to the Tool Table\n"
"with the diameter specified above."
msgstr ""
"Add a new nozzle tool to the Tool Table\n"
"with the diameter specified above."

#: flatcamTools/ToolSolderPaste.py:129
msgid "Generate solder paste dispensing geometry."
msgstr "Generate solder paste dispensing geometry."

#: flatcamTools/ToolSolderPaste.py:142
msgid "STEP 1"
msgstr "STEP 1"

#: flatcamTools/ToolSolderPaste.py:144
msgid ""
"First step is to select a number of nozzle tools for usage\n"
"and then optionally modify the GCode parameters bellow."
msgstr ""
"First step is to select a number of nozzle tools for usage\n"
"and then optionally modify the GCode parameters bellow."

#: flatcamTools/ToolSolderPaste.py:147
msgid ""
"Select tools.\n"
"Modify parameters."
msgstr ""
"Select tools.\n"
"Modify parameters."

#: flatcamTools/ToolSolderPaste.py:235
msgid ""
"Feedrate (speed) while moving up vertically\n"
" to Dispense position (on Z plane)."
msgstr ""
"Feedrate (speed) while moving up vertically\n"
" to Dispense position (on Z plane)."

#: flatcamTools/ToolSolderPaste.py:289
msgid "Generate GCode"
msgstr "Generate GCode"

#: flatcamTools/ToolSolderPaste.py:291
msgid ""
"Generate GCode for Solder Paste dispensing\n"
"on PCB pads."
msgstr ""
"Generate GCode for Solder Paste dispensing\n"
"on PCB pads."

#: flatcamTools/ToolSolderPaste.py:306
msgid "STEP 2"
msgstr "STEP 2"

#: flatcamTools/ToolSolderPaste.py:308
msgid ""
"Second step is to create a solder paste dispensing\n"
"geometry out of an Solder Paste Mask Gerber file."
msgstr ""
"Second step is to create a solder paste dispensing\n"
"geometry out of an Solder Paste Mask Gerber file."

#: flatcamTools/ToolSolderPaste.py:324
msgid "Geo Result"
msgstr "Geo Result"

#: flatcamTools/ToolSolderPaste.py:326
msgid ""
"Geometry Solder Paste object.\n"
"The name of the object has to end in:\n"
"'_solderpaste' as a protection."
msgstr ""
"Geometry Solder Paste object.\n"
"The name of the object has to end in:\n"
"'_solderpaste' as a protection."

#: flatcamTools/ToolSolderPaste.py:335
msgid "STEP 3"
msgstr "STEP 3"

#: flatcamTools/ToolSolderPaste.py:337
msgid ""
"Third step is to select a solder paste dispensing geometry,\n"
"and then generate a CNCJob object.\n"
"\n"
"REMEMBER: if you want to create a CNCJob with new parameters,\n"
"first you need to generate a geometry with those new params,\n"
"and only after that you can generate an updated CNCJob."
msgstr ""
"Third step is to select a solder paste dispensing geometry,\n"
"and then generate a CNCJob object.\n"
"\n"
"REMEMBER: if you want to create a CNCJob with new parameters,\n"
"first you need to generate a geometry with those new params,\n"
"and only after that you can generate an updated CNCJob."

#: flatcamTools/ToolSolderPaste.py:357
msgid "CNC Result"
msgstr "CNC Result"

#: flatcamTools/ToolSolderPaste.py:359
msgid ""
"CNCJob Solder paste object.\n"
"In order to enable the GCode save section,\n"
"the name of the object has to end in:\n"
"'_solderpaste' as a protection."
msgstr ""
"CNCJob Solder paste object.\n"
"In order to enable the GCode save section,\n"
"the name of the object has to end in:\n"
"'_solderpaste' as a protection."

#: flatcamTools/ToolSolderPaste.py:369
msgid "View GCode"
msgstr "View GCode"

#: flatcamTools/ToolSolderPaste.py:371
msgid ""
"View the generated GCode for Solder Paste dispensing\n"
"on PCB pads."
msgstr ""
"View the generated GCode for Solder Paste dispensing\n"
"on PCB pads."

#: flatcamTools/ToolSolderPaste.py:377
msgid ""
"Save the generated GCode for Solder Paste dispensing\n"
"on PCB pads, to a file."
msgstr ""
"Save the generated GCode for Solder Paste dispensing\n"
"on PCB pads, to a file."

#: flatcamTools/ToolSolderPaste.py:381
msgid "STEP 4"
msgstr "STEP 4"

#: flatcamTools/ToolSolderPaste.py:383
msgid ""
"Fourth step (and last) is to select a CNCJob made from \n"
"a solder paste dispensing geometry, and then view/save it's GCode."
msgstr ""
"Fourth step (and last) is to select a CNCJob made from \n"
"a solder paste dispensing geometry, and then view/save it's GCode."

#: flatcamTools/ToolSolderPaste.py:799
msgid "Adding Nozzle tool cancelled. Tool already in Tool Table."
msgstr "Adding Nozzle tool cancelled. Tool already in Tool Table."

#: flatcamTools/ToolSolderPaste.py:805
msgid "New Nozzle tool added to Tool Table."
msgstr "New Nozzle tool added to Tool Table."

#: flatcamTools/ToolSolderPaste.py:848
msgid "Nozzle tool from Tool Table was edited."
msgstr "Nozzle tool from Tool Table was edited."

#: flatcamTools/ToolSolderPaste.py:906
msgid "Delete failed. Select a Nozzle tool to delete."
msgstr "Delete failed. Select a Nozzle tool to delete."

#: flatcamTools/ToolSolderPaste.py:912
msgid "Nozzle tool(s) deleted from Tool Table."
msgstr "Nozzle tool(s) deleted from Tool Table."

#: flatcamTools/ToolSolderPaste.py:968
msgid "No SolderPaste mask Gerber object loaded."
msgstr "No SolderPaste mask Gerber object loaded."

#: flatcamTools/ToolSolderPaste.py:986
msgid "Creating Solder Paste dispensing geometry."
msgstr "Creating Solder Paste dispensing geometry."

#: flatcamTools/ToolSolderPaste.py:999
msgid "No Nozzle tools in the tool table."
msgstr "No Nozzle tools in the tool table."

#: flatcamTools/ToolSolderPaste.py:1126
msgid "Cancelled. Empty file, it has no geometry..."
msgstr "Cancelled. Empty file, it has no geometry..."

#: flatcamTools/ToolSolderPaste.py:1130
msgid "Solder Paste geometry generated successfully"
msgstr "Solder Paste geometry generated successfully"

#: flatcamTools/ToolSolderPaste.py:1137
msgid "Some or all pads have no solder due of inadequate nozzle diameters..."
msgstr "Some or all pads have no solder due of inadequate nozzle diameters..."

#: flatcamTools/ToolSolderPaste.py:1151
msgid "Generating Solder Paste dispensing geometry..."
msgstr "Generating Solder Paste dispensing geometry..."

#: flatcamTools/ToolSolderPaste.py:1172
msgid "There is no Geometry object available."
msgstr "There is no Geometry object available."

#: flatcamTools/ToolSolderPaste.py:1177
msgid "This Geometry can't be processed. NOT a solder_paste_tool geometry."
msgstr "This Geometry can't be processed. NOT a solder_paste_tool geometry."

#: flatcamTools/ToolSolderPaste.py:1285
msgid "ToolSolderPaste CNCjob created"
msgstr "ToolSolderPaste CNCjob created"

#: flatcamTools/ToolSolderPaste.py:1318 flatcamTools/ToolSolderPaste.py:1323
#: flatcamTools/ToolSolderPaste.py:1378
msgid ""
"This CNCJob object can't be processed. NOT a solder_paste_tool CNCJob object."
msgstr ""
"This CNCJob object can't be processed. NOT a solder_paste_tool CNCJob object."

#: flatcamTools/ToolSolderPaste.py:1348
msgid "No Gcode in the object"
msgstr "No Gcode in the object"

#: flatcamTools/ToolSolderPaste.py:1358
msgid "ToolSolderPaste.on_view_gcode()"
msgstr "ToolSolderPaste.on_view_gcode()"

#: flatcamTools/ToolSolderPaste.py:1388
msgid "Export GCode ..."
msgstr "Export GCode ..."

#: flatcamTools/ToolSolderPaste.py:1436
msgid "Solder paste dispenser GCode file saved to"
msgstr "Solder paste dispenser GCode file saved to"

#: flatcamTools/ToolSub.py:57
msgid "Gerber Objects"
msgstr "Gerber Objects"

#: flatcamTools/ToolSub.py:66 flatcamTools/ToolSub.py:112
msgid "Target"
msgstr "Target"

#: flatcamTools/ToolSub.py:68
msgid ""
"Gerber object from which to substract\n"
"the substractor Gerber object."
msgstr ""
"Gerber object from which to substract\n"
"the substractor Gerber object."

#: flatcamTools/ToolSub.py:80 flatcamTools/ToolSub.py:126
msgid "Substractor"
msgstr "Substractor"

#: flatcamTools/ToolSub.py:82
msgid ""
"Gerber object that will be substracted\n"
"from the target Gerber object."
msgstr ""
"Gerber object that will be substracted\n"
"from the target Gerber object."

#: flatcamTools/ToolSub.py:89
msgid "Substract Gerber"
msgstr "Substract Gerber"

#: flatcamTools/ToolSub.py:91
msgid ""
"Will remove the area occupied by the substractor\n"
"Gerber from the Target Gerber.\n"
"Can be used to remove the overlapping silkscreen\n"
"over the soldermask."
msgstr ""
"Will remove the area occupied by the substractor\n"
"Gerber from the Target Gerber.\n"
"Can be used to remove the overlapping silkscreen\n"
"over the soldermask."

#: flatcamTools/ToolSub.py:103
msgid "Geometry Objects"
msgstr "Geometry Objects"

#: flatcamTools/ToolSub.py:114
msgid ""
"Geometry object from which to substract\n"
"the substractor Geometry object."
msgstr ""
"Geometry object from which to substract\n"
"the substractor Geometry object."

#: flatcamTools/ToolSub.py:128
msgid ""
"Geometry object that will be substracted\n"
"from the target Geometry object."
msgstr ""
"Geometry object that will be substracted\n"
"from the target Geometry object."

#: flatcamTools/ToolSub.py:139
msgid "Substract Geometry"
msgstr "Substract Geometry"

#: flatcamTools/ToolSub.py:141
msgid ""
"Will remove the area occupied by the substractor\n"
"Geometry from the Target Geometry."
msgstr ""
"Will remove the area occupied by the substractor\n"
"Geometry from the Target Geometry."

#: flatcamTools/ToolSub.py:228
msgid "Sub Tool"
msgstr "Sub Tool"

#: flatcamTools/ToolSub.py:245 flatcamTools/ToolSub.py:447
msgid "No Target object loaded."
msgstr "No Target object loaded."

#: flatcamTools/ToolSub.py:260 flatcamTools/ToolSub.py:462
msgid "No Substractor object loaded."
msgstr "No Substractor object loaded."

#: flatcamTools/ToolSub.py:314
msgid "Parsing aperture"
msgstr "Parsing aperture"

#: flatcamTools/ToolSub.py:416 flatcamTools/ToolSub.py:619
msgid "Generating new object ..."
msgstr "Generating new object ..."

#: flatcamTools/ToolSub.py:420 flatcamTools/ToolSub.py:623
#: flatcamTools/ToolSub.py:704
msgid "Generating new object failed."
msgstr "Generating new object failed."

#: flatcamTools/ToolSub.py:425 flatcamTools/ToolSub.py:629
msgid "Created"
msgstr "Created"

#: flatcamTools/ToolSub.py:476
msgid "Currently, the Substractor geometry cannot be of type Multigeo."
msgstr "Currently, the Substractor geometry cannot be of type Multigeo."

#: flatcamTools/ToolSub.py:521
msgid "Parsing solid_geometry ..."
msgstr "Parsing solid_geometry ..."

#: flatcamTools/ToolSub.py:523
msgid "Parsing tool"
msgstr "Parsing tool"

#: flatcamTools/ToolTransform.py:23
msgid "Object Transform"
msgstr "Object Transform"

#: flatcamTools/ToolTransform.py:84
msgid ""
"Rotate the selected object(s).\n"
"The point of reference is the middle of\n"
"the bounding box for all selected objects."
msgstr ""
"Rotate the selected object(s).\n"
"The point of reference is the middle of\n"
"the bounding box for all selected objects."

#: flatcamTools/ToolTransform.py:120 flatcamTools/ToolTransform.py:138
msgid ""
"Skew/shear the selected object(s).\n"
"The point of reference is the middle of\n"
"the bounding box for all selected objects."
msgstr ""
"Skew/shear the selected object(s).\n"
"The point of reference is the middle of\n"
"the bounding box for all selected objects."

#: flatcamTools/ToolTransform.py:176 flatcamTools/ToolTransform.py:193
msgid ""
"Scale the selected object(s).\n"
"The point of reference depends on \n"
"the Scale reference checkbox state."
msgstr ""
"Scale the selected object(s).\n"
"The point of reference depends on \n"
"the Scale reference checkbox state."

#: flatcamTools/ToolTransform.py:251 flatcamTools/ToolTransform.py:268
msgid ""
"Offset the selected object(s).\n"
"The point of reference is the middle of\n"
"the bounding box for all selected objects.\n"
msgstr ""
"Offset the selected object(s).\n"
"The point of reference is the middle of\n"
"the bounding box for all selected objects.\n"

#: flatcamTools/ToolTransform.py:298 flatcamTools/ToolTransform.py:306
msgid ""
"Flip the selected object(s) over the X axis.\n"
"Does not create a new object.\n"
" "
msgstr ""
"Flip the selected object(s) over the X axis.\n"
"Does not create a new object.\n"
" "

#: flatcamTools/ToolTransform.py:643
msgid "No object selected. Please Select an object to rotate!"
msgstr "No object selected. Please Select an object to rotate!"

#: flatcamTools/ToolTransform.py:671
msgid "CNCJob objects can't be rotated."
msgstr "CNCJob objects can't be rotated."

#: flatcamTools/ToolTransform.py:679
msgid "Rotate done"
msgstr "Rotate done"

#: flatcamTools/ToolTransform.py:684 flatcamTools/ToolTransform.py:759
#: flatcamTools/ToolTransform.py:809 flatcamTools/ToolTransform.py:868
#: flatcamTools/ToolTransform.py:904
msgid "Due of"
msgstr "Due of"

#: flatcamTools/ToolTransform.py:684 flatcamTools/ToolTransform.py:759
#: flatcamTools/ToolTransform.py:809 flatcamTools/ToolTransform.py:868
#: flatcamTools/ToolTransform.py:904
msgid "action was not executed."
msgstr "action was not executed."

#: flatcamTools/ToolTransform.py:696
msgid "No object selected. Please Select an object to flip"
msgstr "No object selected. Please Select an object to flip"

#: flatcamTools/ToolTransform.py:731
msgid "CNCJob objects can't be mirrored/flipped."
msgstr "CNCJob objects can't be mirrored/flipped."

#: flatcamTools/ToolTransform.py:769
msgid "No object selected. Please Select an object to shear/skew!"
msgstr "No object selected. Please Select an object to shear/skew!"

#: flatcamTools/ToolTransform.py:791
msgid "CNCJob objects can't be skewed."
msgstr "CNCJob objects can't be skewed."

#: flatcamTools/ToolTransform.py:804
msgid "Skew on the"
msgstr "Skew on the"

#: flatcamTools/ToolTransform.py:804 flatcamTools/ToolTransform.py:864
#: flatcamTools/ToolTransform.py:899
msgid "axis done"
msgstr "axis done"

#: flatcamTools/ToolTransform.py:821
msgid "No object selected. Please Select an object to scale!"
msgstr "No object selected. Please Select an object to scale!"

#: flatcamTools/ToolTransform.py:854
msgid "CNCJob objects can't be scaled."
msgstr "CNCJob objects can't be scaled."

#: flatcamTools/ToolTransform.py:864
msgid "Scale on the"
msgstr "Scale on the"

#: flatcamTools/ToolTransform.py:876
msgid "No object selected. Please Select an object to offset!"
msgstr "No object selected. Please Select an object to offset!"

#: flatcamTools/ToolTransform.py:885
msgid "CNCJob objects can't be offset."
msgstr "CNCJob objects can't be offset."

#: flatcamTools/ToolTransform.py:899
msgid "Offset on the"
msgstr "Offset on the"

#: tclCommands/TclCommandBbox.py:70 tclCommands/TclCommandNregions.py:68
msgid "Expected FlatCAMGerber or FlatCAMGeometry, got"
msgstr "Expected FlatCAMGerber or FlatCAMGeometry, got"

#: tclCommands/TclCommandCopperClear.py:236 tclCommands/TclCommandPaint.py:235
msgid "Expected -box <value>."
msgstr "Expected -box <value>."

#: tclCommands/TclCommandCopperClear.py:245 tclCommands/TclCommandPaint.py:244
#: tclCommands/TclCommandScale.py:63
msgid "Could not retrieve box object"
msgstr "Could not retrieve box object"

#: tclCommands/TclCommandCopperClear.py:267
msgid ""
"None of the following args: 'ref', 'all' were found or none was set to 1.\n"
"Copper clearing failed."
msgstr ""
"None of the following args: 'ref', 'all' were found or none was set to 1.\n"
"Copper clearing failed."

#: tclCommands/TclCommandPaint.py:212
msgid "Expected -x <value> and -y <value>."
msgstr "Expected -x <value> and -y <value>."

#: tclCommands/TclCommandPaint.py:263
msgid ""
"There was none of the following args: 'ref', 'single', 'all'.\n"
"Paint failed."
msgstr ""
"There was none of the following args: 'ref', 'single', 'all'.\n"
"Paint failed."

#: tclCommands/TclCommandScale.py:83
msgid "Expected -origin <origin> or -origin <min_bounds> or -origin <center>."
msgstr "Expected -origin <origin> or -origin <min_bounds> or -origin <center>."

#: tclCommands/TclCommandScale.py:92
msgid "Expected -x <value> -y <value>."
msgstr "Expected -x <value> -y <value>."

#: tclCommands/TclCommandSubtractRectangle.py:49
msgid "No Geometry name in args. Provide a name and try again."
msgstr "No Geometry name in args. Provide a name and try again."

#~ msgid ""
#~ " Wrong value format for self.defaults[\"feedrate_probe\"] or self."
#~ "options[\"feedrate_probe\"]"
#~ msgstr ""
#~ " Wrong value format for self.defaults[\"feedrate_probe\"] or self."
#~ "options[\"feedrate_probe\"]"

#~ msgid "Wrong optimization type selected."
#~ msgstr "Wrong optimization type selected."

#~ msgid "FILE ASSOCIATIONS"
#~ msgstr "FILE ASSOCIATIONS"

#~ msgid "Advanced Param."
#~ msgstr "Advanced Param."

#~ msgid "MH"
#~ msgstr "MH"

#~ msgid "Feedrate (Plunge)"
#~ msgstr "Feedrate (Plunge)"

#~ msgid ""
#~ "Parameters used to create a CNC Job object\n"
#~ "for this drill object that are shown when App Level is Advanced."
#~ msgstr ""
#~ "Parameters used to create a CNC Job object\n"
#~ "for this drill object that are shown when App Level is Advanced."

#~ msgid ""
#~ "Parameters to create a CNC Job object\n"
#~ "tracing the contours of a Geometry object."
#~ msgstr ""
#~ "Parameters to create a CNC Job object\n"
#~ "tracing the contours of a Geometry object."

#~ msgid "Manufacturing"
#~ msgstr "Manufacturing"

#~ msgid "Function"
#~ msgstr "Function"

#~ msgid ""
#~ "Juan Pablo Caram <BR><BR>Denis Hayrullin<BR>Kamil Sopko<BR>Marius "
#~ "Stanciu<BR>Matthieu Berthomé<BR><Br>and many others found <a href = "
#~ "\"https://bitbucket.org/jpcgt/flatcam/pull-requests/?state=MERGED\">here."
#~ "</a><BR><BR>"
#~ msgstr ""
#~ "Juan Pablo Caram <BR><BR>Denis Hayrullin<BR>Kamil Sopko<BR>Marius "
#~ "Stanciu<BR>Matthieu Berthomé<BR><Br>and many others found <a href = "
#~ "\"https://bitbucket.org/jpcgt/flatcam/pull-requests/?state=MERGED\">here."
#~ "</a><BR><BR>"

#~ msgid ""
#~ "\n"
#~ "<p><span style=\"font-size:{tsize}px\"><strong>Selected Tab - Choose an "
#~ "Item from Project Tab</strong></span></p>\n"
#~ "\n"
#~ "<p><span style=\"font-size:{fsize}px\"><strong>Details</strong>:<br />\n"
#~ "The normal flow when working in FlatCAM is the following:</span></p>\n"
#~ "\n"
#~ "<ol>\n"
#~ "\t<li><span style=\"font-size:{fsize}px\">Loat/Import a Gerber, Excellon, "
#~ "Gcode, DXF, Raster Image or SVG file into FlatCAM using either the "
#~ "menu&#39;s, toolbars, key shortcuts or even dragging and dropping the "
#~ "files on the GUI.<br />\n"
#~ "\t<br />\n"
#~ "\tYou can also load a <strong>FlatCAM project</strong> by double clicking "
#~ "on the project file, drag &amp; drop of the file into the FLATCAM GUI or "
#~ "through the menu/toolbar links offered within the app.</span><br />\n"
#~ "\t&nbsp;</li>\n"
#~ "\t<li><span style=\"font-size:{fsize}px\">Once an object is available in "
#~ "the Project Tab, by selecting it and then focusing on <strong>SELECTED "
#~ "TAB </strong>(more simpler is to double click the object name in the "
#~ "Project Tab), <strong>SELECTED TAB </strong>will be updated with the "
#~ "object properties according to it&#39;s kind: Gerber, Excellon, Geometry "
#~ "or CNCJob object.<br />\n"
#~ "\t<br />\n"
#~ "\tIf the selection of the object is done on the canvas by single click "
#~ "instead, and the <strong>SELECTED TAB</strong> is in focus, again the "
#~ "object properties will be displayed into the Selected Tab. Alternatively, "
#~ "double clicking on the object on the canvas will bring the "
#~ "<strong>SELECTED TAB</strong> and populate it even if it was out of focus."
#~ "<br />\n"
#~ "\t<br />\n"
#~ "\tYou can change the parameters in this screen and the flow direction is "
#~ "like this:<br />\n"
#~ "\t<br />\n"
#~ "\t<strong>Gerber/Excellon Object</strong> -&gt; Change Param -&gt; "
#~ "Generate Geometry -&gt;<strong> Geometry Object </strong>-&gt; Add tools "
#~ "(change param in Selected Tab) -&gt; Generate CNCJob -&gt;<strong> CNCJob "
#~ "Object </strong>-&gt; Verify GCode (through Edit CNC Code) and/or append/"
#~ "prepend to GCode (again, done in <strong>SELECTED TAB)&nbsp;</strong>-"
#~ "&gt; Save GCode</span></li>\n"
#~ "</ol>\n"
#~ "\n"
#~ "<p><span style=\"font-size:{fsize}px\">A list of key shortcuts is "
#~ "available through an menu entry in <strong>Help -&gt; Shortcuts List</"
#~ "strong>&nbsp;or through it&#39;s own key shortcut: <strong>F3</strong>.</"
#~ "span></p>\n"
#~ "\n"
#~ "        "
#~ msgstr ""
#~ "\n"
#~ "<p><span style=\"font-size:{tsize}px\"><strong>Selected Tab - Choose an "
#~ "Item from Project Tab</strong></span></p>\n"
#~ "\n"
#~ "<p><span style=\"font-size:{fsize}px\"><strong>Details</strong>:<br />\n"
#~ "The normal flow when working in FlatCAM is the following:</span></p>\n"
#~ "\n"
#~ "<ol>\n"
#~ "\t<li><span style=\"font-size:{fsize}px\">Loat/Import a Gerber, Excellon, "
#~ "Gcode, DXF, Raster Image or SVG file into FlatCAM using either the "
#~ "menu&#39;s, toolbars, key shortcuts or even dragging and dropping the "
#~ "files on the GUI.<br />\n"
#~ "\t<br />\n"
#~ "\tYou can also load a <strong>FlatCAM project</strong> by double clicking "
#~ "on the project file, drag &amp; drop of the file into the FLATCAM GUI or "
#~ "through the menu/toolbar links offered within the app.</span><br />\n"
#~ "\t&nbsp;</li>\n"
#~ "\t<li><span style=\"font-size:{fsize}px\">Once an object is available in "
#~ "the Project Tab, by selecting it and then focusing on <strong>SELECTED "
#~ "TAB </strong>(more simpler is to double click the object name in the "
#~ "Project Tab), <strong>SELECTED TAB </strong>will be updated with the "
#~ "object properties according to it&#39;s kind: Gerber, Excellon, Geometry "
#~ "or CNCJob object.<br />\n"
#~ "\t<br />\n"
#~ "\tIf the selection of the object is done on the canvas by single click "
#~ "instead, and the <strong>SELECTED TAB</strong> is in focus, again the "
#~ "object properties will be displayed into the Selected Tab. Alternatively, "
#~ "double clicking on the object on the canvas will bring the "
#~ "<strong>SELECTED TAB</strong> and populate it even if it was out of focus."
#~ "<br />\n"
#~ "\t<br />\n"
#~ "\tYou can change the parameters in this screen and the flow direction is "
#~ "like this:<br />\n"
#~ "\t<br />\n"
#~ "\t<strong>Gerber/Excellon Object</strong> -&gt; Change Param -&gt; "
#~ "Generate Geometry -&gt;<strong> Geometry Object </strong>-&gt; Add tools "
#~ "(change param in Selected Tab) -&gt; Generate CNCJob -&gt;<strong> CNCJob "
#~ "Object </strong>-&gt; Verify GCode (through Edit CNC Code) and/or append/"
#~ "prepend to GCode (again, done in <strong>SELECTED TAB)&nbsp;</strong>-"
#~ "&gt; Save GCode</span></li>\n"
#~ "</ol>\n"
#~ "\n"
#~ "<p><span style=\"font-size:{fsize}px\">A list of key shortcuts is "
#~ "available through an menu entry in <strong>Help -&gt; Shortcuts List</"
#~ "strong>&nbsp;or through it&#39;s own key shortcut: <strong>F3</strong>.</"
#~ "span></p>\n"
#~ "\n"
#~ "        "

#~ msgid "Run Script ...\tSHIFT+S"
#~ msgstr "Run Script ...\tSHIFT+S"

#~| msgid ""
#~| "<font size=8><B>FlatCAM</B></font><BR>Version {version} {beta} ({date}) "
#~| "- {arch} <BR><BR>2D Computer-Aided Printed Circuit "
#~| "Board<BR>Manufacturing.<BR><BR>(c) 2014-2019 <B>Juan Pablo Caram</"
#~| "B><BR><BR><B> Main Contributors:</B><BR>Denis Hayrullin<BR>Kamil "
#~| "Sopko<BR>Marius Stanciu<BR>Matthieu Berthomé<BR>and many others found <a "
#~| "href = \"https://bitbucket.org/jpcgt/flatcam/pull-requests/?state=MERGED"
#~| "\">here.</a><BR><BR>Development is done <a href = \"https://bitbucket."
#~| "org/jpcgt/flatcam/src/Beta/\">here.</a><BR>DOWNLOAD area <a href = "
#~| "\"https://bitbucket.org/jpcgt/flatcam/downloads/\">here.</a><BR>"
#~ msgid ""
#~ "<font size=8><B>FlatCAM</B></font><BR>Version {version} {beta} ({date}) - "
#~ "{arch} <BR><BR>2D Computer-Aided Printed Circuit Board<BR>Manufacturing."
#~ "<BR><BR><B> License: </B><BR>Licensed under MIT license (2014 - "
#~ "2019)<BR>by (c)Juan Pablo Caram <BR><BR><B> Programmers:</B><BR>Denis "
#~ "Hayrullin<BR>Kamil Sopko<BR>Marius Stanciu<BR>Matthieu Berthomé<BR>and "
#~ "many others found <a href = \"https://bitbucket.org/jpcgt/flatcam/pull-"
#~ "requests/?state=MERGED\">here.</a><BR><BR><B>Development</B> is done <a "
#~ "href = \"https://bitbucket.org/jpcgt/flatcam/src/Beta/\">here.</"
#~ "a><BR><b>DOWNLOAD</B> area <a href = \"https://bitbucket.org/jpcgt/"
#~ "flatcam/downloads/\">here.</a><BR>"
#~ msgstr ""
#~ "<font size=8><B>FlatCAM</B></font><BR>Version {version} {beta} ({date}) - "
#~ "{arch} <BR><BR>2D Computer-Aided Printed Circuit Board<BR>Manufacturing."
#~ "<BR><BR><B> License: </B><BR>Licensed under MIT license (2014 - "
#~ "2019)<BR>by (c)Juan Pablo Caram <BR><BR><B> Programmers:</B><BR>Denis "
#~ "Hayrullin<BR>Kamil Sopko<BR>Marius Stanciu<BR>Matthieu Berthomé<BR>and "
#~ "many others found <a href = \"https://bitbucket.org/jpcgt/flatcam/pull-"
#~ "requests/?state=MERGED\">here.</a><BR><BR><B>Development</B> is done <a "
#~ "href = \"https://bitbucket.org/jpcgt/flatcam/src/Beta/\">here.</"
#~ "a><BR><b>DOWNLOAD</B> area <a href = \"https://bitbucket.org/jpcgt/"
#~ "flatcam/downloads/\">here.</a><BR>"

#~| msgid "[ERROR_NOTCL] Expected a FlatCAMGeometry, got %s"
#~ msgid "Expected a FlatCAMGeometry, got %s"
#~ msgstr "Expected a FlatCAMGeometry, got %s"

#~ msgid "Saved to: %s"
#~ msgstr "Saved to: %s"

#~ msgid "[WARNING_NOTCL] Adding Tool cancelled ..."
#~ msgstr "[WARNING_NOTCL] Adding Tool cancelled ..."

#~ msgid "%s"
#~ msgstr "%s"

#~| msgid "[ERROR]App.on_view_source() -->%s"
#~ msgid "App.on_view_source() -->"
#~ msgstr "App.on_view_source() -->"

#~ msgid "[success] Name changed from {old} to {new}"
#~ msgstr "[success] Name changed from {old} to {new}"

#~| msgid ""
#~| "[ERROR_NOTCL] Failed.\n"
#~| "%s"
#~ msgid "[ERROR_NOTCL] %s"
#~ msgstr "[ERROR_NOTCL] %s"

#~ msgid "Editor %s"
#~ msgstr "Editor %s"

#~ msgid "[success] Done. Path completed."
#~ msgstr "[success] Done. Path completed."

#~ msgid "[success] Paint done."
#~ msgstr "[success] Paint done."

#~ msgid "About"
#~ msgstr "About"

#~| msgid ""
#~| "<b>General Shortcut list</b><br>\n"
#~| "            <table border=\"0\" cellpadding=\"0\" cellspacing=\"0\" "
#~| "style=\"width:283px\">\n"
#~| "                <tbody>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\" width=\"89\"><strong>F3</"
#~| "strong></td>\n"
#~| "                        <td width=\"194\"><span style=\"color:"
#~| "#006400\"><strong>&nbsp;SHOW SHORTCUT LIST</strong></span></td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\">&nbsp;</td>\n"
#~| "                        <td>&nbsp;</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>1</strong></td>\n"
#~| "                        <td>&nbsp;Switch to Project Tab</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>2</strong></td>\n"
#~| "                        <td>&nbsp;Switch to Selected Tab</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>3</strong></td>\n"
#~| "                        <td>&nbsp;Switch to Tool Tab</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\">&nbsp;</td>\n"
#~| "                        <td>&nbsp;</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>B</strong></td>\n"
#~| "                        <td>&nbsp;New Gerber</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>E</strong></td>\n"
#~| "                        <td>&nbsp;Edit Object (if selected)</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>G</strong></td>\n"
#~| "                        <td>&nbsp;Grid On/Off</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>J</strong></td>\n"
#~| "                        <td>&nbsp;Jump to Coordinates</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>L</strong></td>\n"
#~| "                        <td>&nbsp;New Excellon</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>M</strong></td>\n"
#~| "                        <td>&nbsp;Move Obj</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>N</strong></td>\n"
#~| "                        <td>&nbsp;New Geometry</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>O</strong></td>\n"
#~| "                        <td>&nbsp;Set Origin</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>Q</strong></td>\n"
#~| "                        <td>&nbsp;Change Units</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>P</strong></td>\n"
#~| "                        <td>&nbsp;Open Properties Tool</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>R</strong></td>\n"
#~| "                        <td>&nbsp;Rotate by 90 degree CW</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>S</strong></td>\n"
#~| "                        <td>&nbsp;Shell Toggle</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>T</strong></td>\n"
#~| "                        <td>&nbsp;Add a Tool (when in Geometry Selected "
#~| "Tab or in Tools NCC or Tools Paint)</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>V</strong></td>\n"
#~| "                        <td>&nbsp;Zoom Fit</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>X</strong></td>\n"
#~| "                        <td>&nbsp;Flip on X_axis</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>Y</strong></td>\n"
#~| "                        <td>&nbsp;Flip on Y_axis</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>&#39;-&#39;</strong></"
#~| "td>\n"
#~| "                        <td>&nbsp;Zoom Out</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>&#39;=&#39;</strong></"
#~| "td>\n"
#~| "                        <td>&nbsp;Zoom In</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\">&nbsp;</td>\n"
#~| "                        <td>&nbsp;</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>CTRL+A</strong></td>\n"
#~| "                        <td>&nbsp;Select All</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>CTRL+C</strong></td>\n"
#~| "                        <td>&nbsp;Copy Obj</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>CTRL+E</strong></td>\n"
#~| "                        <td>&nbsp;Open Excellon File</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>CTRL+G</strong></td>\n"
#~| "                        <td>&nbsp;Open Gerber File</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>CTRL+N</strong></td>\n"
#~| "                        <td>&nbsp;New Project</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>CTRL+M</strong></td>\n"
#~| "                        <td>&nbsp;Measurement Tool</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>CTRL+O</strong></td>\n"
#~| "                        <td>&nbsp;Open Project</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>CTRL+S</strong></td>\n"
#~| "                        <td>&nbsp;Save Project As</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>CTRL+F10</strong></"
#~| "td>\n"
#~| "                        <td>&nbsp;Toggle Plot Area</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\">&nbsp;</td>\n"
#~| "                        <td>&nbsp;</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>SHIFT+C</strong></td>\n"
#~| "                        <td>&nbsp;Copy Obj_Name</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>SHIFT+E</strong></td>\n"
#~| "                        <td>&nbsp;Toggle Code Editor</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>SHIFT+G</strong></td>\n"
#~| "                        <td>&nbsp;Toggle the axis</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>SHIFT+P</strong></td>\n"
#~| "                        <td>&nbsp;Open Preferences Window</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>SHIFT+R</strong></td>\n"
#~| "                        <td>&nbsp;Rotate by 90 degree CCW</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>SHIFT+S</strong></td>\n"
#~| "                        <td>&nbsp;Run a Script</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>SHIFT+W</strong></td>\n"
#~| "                        <td>&nbsp;Toggle the workspace</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>SHIFT+X</strong></td>\n"
#~| "                        <td>&nbsp;Skew on X axis</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>SHIFT+Y</strong></td>\n"
#~| "                        <td>&nbsp;Skew on Y axis</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\">&nbsp;</td>\n"
#~| "                        <td>&nbsp;</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>ALT+C</strong></td>\n"
#~| "                        <td>&nbsp;Calculators Tool</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>ALT+D</strong></td>\n"
#~| "                        <td>&nbsp;2-Sided PCB Tool</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>ALT+K</strong></td>\n"
#~| "                        <td>&nbsp;Solder Paste Dispensing Tool</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>ALT+L</strong></td>\n"
#~| "                        <td>&nbsp;Film PCB Tool</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>ALT+N</strong></td>\n"
#~| "                        <td>&nbsp;Non-Copper Clearing Tool</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>ALT+P</strong></td>\n"
#~| "                        <td>&nbsp;Paint Area Tool</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>ALT+Q</strong></td>\n"
#~| "                        <td>&nbsp;PDF Import Tool</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>ALT+R</strong></td>\n"
#~| "                        <td>&nbsp;Transformations Tool</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>ALT+S</strong></td>\n"
#~| "                        <td>&nbsp;View File Source</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>ALT+U</strong></td>\n"
#~| "                        <td>&nbsp;Cutout PCB Tool</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>ALT+1</strong></td>\n"
#~| "                        <td>&nbsp;Enable all Plots</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>ALT+2</strong></td>\n"
#~| "                        <td>&nbsp;Disable all Plots</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>ALT+3</strong></td>\n"
#~| "                        <td>&nbsp;Disable Non-selected Plots</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>ALT+F10</strong></td>\n"
#~| "                        <td>&nbsp;Toggle Full Screen</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\">&nbsp;</td>\n"
#~| "                        <td>&nbsp;</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>F1</strong></td>\n"
#~| "                        <td>&nbsp;Open Online Manual</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>F4</strong></td>\n"
#~| "                        <td>&nbsp;Open Online Tutorials</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>Del</strong></td>\n"
#~| "                        <td>&nbsp;Delete Object</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>Del</strong></td>\n"
#~| "                        <td>&nbsp;Alternate: Delete Tool</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>'`'</strong></td>\n"
#~| "                        <td>&nbsp;(left to Key_1)Toogle Notebook Area "
#~| "(Left Side)</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>SPACE</strong></td>\n"
#~| "                        <td>&nbsp;En(Dis)able Obj Plot</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>Escape</strong></td>\n"
#~| "                        <td>&nbsp;Deselects all objects</td>\n"
#~| "                    </tr>\n"
#~| "                </tbody>\n"
#~| "            </table>\n"
#~| "    \n"
#~| "            "
#~ msgid ""
#~ "<b>General Shortcut list</b><br>\n"
#~ "            <table border=\"0\" cellpadding=\"0\" cellspacing=\"0\" style="
#~ "\"width:283px\">\n"
#~ "                <tbody>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\" width=\"89\"><strong>F3</"
#~ "strong></td>\n"
#~ "                        <td width=\"194\"><span style=\"color:"
#~ "#006400\"><strong>&nbsp;SHOW SHORTCUT LIST</strong></span></td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>1</strong></td>\n"
#~ "                        <td>&nbsp;Switch to Project Tab</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>2</strong></td>\n"
#~ "                        <td>&nbsp;Switch to Selected Tab</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>3</strong></td>\n"
#~ "                        <td>&nbsp;Switch to Tool Tab</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>B</strong></td>\n"
#~ "                        <td>&nbsp;New Gerber</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>E</strong></td>\n"
#~ "                        <td>&nbsp;Edit Object (if selected)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>G</strong></td>\n"
#~ "                        <td>&nbsp;Grid On/Off</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>J</strong></td>\n"
#~ "                        <td>&nbsp;Jump to Coordinates</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>L</strong></td>\n"
#~ "                        <td>&nbsp;New Excellon</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>M</strong></td>\n"
#~ "                        <td>&nbsp;Move Obj</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>N</strong></td>\n"
#~ "                        <td>&nbsp;New Geometry</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>O</strong></td>\n"
#~ "                        <td>&nbsp;Set Origin</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Q</strong></td>\n"
#~ "                        <td>&nbsp;Change Units</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>P</strong></td>\n"
#~ "                        <td>&nbsp;Open Properties Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>R</strong></td>\n"
#~ "                        <td>&nbsp;Rotate by 90 degree CW</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>S</strong></td>\n"
#~ "                        <td>&nbsp;Shell Toggle</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>T</strong></td>\n"
#~ "                        <td>&nbsp;Add a Tool (when in Geometry Selected "
#~ "Tab or in Tools NCC or Tools Paint)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>V</strong></td>\n"
#~ "                        <td>&nbsp;Zoom Fit</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>X</strong></td>\n"
#~ "                        <td>&nbsp;Flip on X_axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Y</strong></td>\n"
#~ "                        <td>&nbsp;Flip on Y_axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>&#39;-&#39;</strong></"
#~ "td>\n"
#~ "                        <td>&nbsp;Zoom Out</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>&#39;=&#39;</strong></"
#~ "td>\n"
#~ "                        <td>&nbsp;Zoom In</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>CTRL+A</strong></td>\n"
#~ "                        <td>&nbsp;Select All</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>CTRL+C</strong></td>\n"
#~ "                        <td>&nbsp;Copy Obj</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>CTRL+E</strong></td>\n"
#~ "                        <td>&nbsp;Open Excellon File</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>CTRL+G</strong></td>\n"
#~ "                        <td>&nbsp;Open Gerber File</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>CTRL+N</strong></td>\n"
#~ "                        <td>&nbsp;New Project</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>CTRL+M</strong></td>\n"
#~ "                        <td>&nbsp;Measurement Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>CTRL+O</strong></td>\n"
#~ "                        <td>&nbsp;Open Project</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>CTRL+S</strong></td>\n"
#~ "                        <td>&nbsp;Save Project As</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>CTRL+F10</strong></td>\n"
#~ "                        <td>&nbsp;Toggle Plot Area</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>SHIFT+C</strong></td>\n"
#~ "                        <td>&nbsp;Copy Obj_Name</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>SHIFT+E</strong></td>\n"
#~ "                        <td>&nbsp;Toggle Code Editor</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>SHIFT+G</strong></td>\n"
#~ "                        <td>&nbsp;Toggle the axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>SHIFT+P</strong></td>\n"
#~ "                        <td>&nbsp;Open Preferences Window</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>SHIFT+R</strong></td>\n"
#~ "                        <td>&nbsp;Rotate by 90 degree CCW</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>SHIFT+S</strong></td>\n"
#~ "                        <td>&nbsp;Run a Script</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>SHIFT+W</strong></td>\n"
#~ "                        <td>&nbsp;Toggle the workspace</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>SHIFT+X</strong></td>\n"
#~ "                        <td>&nbsp;Skew on X axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>SHIFT+Y</strong></td>\n"
#~ "                        <td>&nbsp;Skew on Y axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+C</strong></td>\n"
#~ "                        <td>&nbsp;Calculators Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+D</strong></td>\n"
#~ "                        <td>&nbsp;2-Sided PCB Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+K</strong></td>\n"
#~ "                        <td>&nbsp;Solder Paste Dispensing Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+L</strong></td>\n"
#~ "                        <td>&nbsp;Film PCB Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+N</strong></td>\n"
#~ "                        <td>&nbsp;Non-Copper Clearing Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+P</strong></td>\n"
#~ "                        <td>&nbsp;Paint Area Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+Q</strong></td>\n"
#~ "                        <td>&nbsp;PDF Import Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+R</strong></td>\n"
#~ "                        <td>&nbsp;Transformations Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+S</strong></td>\n"
#~ "                        <td>&nbsp;View File Source</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+U</strong></td>\n"
#~ "                        <td>&nbsp;Cutout PCB Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+1</strong></td>\n"
#~ "                        <td>&nbsp;Enable all Plots</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+2</strong></td>\n"
#~ "                        <td>&nbsp;Disable all Plots</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+3</strong></td>\n"
#~ "                        <td>&nbsp;Disable Non-selected Plots</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+F10</strong></td>\n"
#~ "                        <td>&nbsp;Toggle Full Screen</td>\n"
#~ "                    </tr>                 \n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>CTRL+ALT+X</strong></"
#~ "td>\n"
#~ "                        <td>&nbsp;Abort current task (gracefully)</td>\n"
#~ "                    </tr>                    \n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>F1</strong></td>\n"
#~ "                        <td>&nbsp;Open Online Manual</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>F4</strong></td>\n"
#~ "                        <td>&nbsp;Open Online Tutorials</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Del</strong></td>\n"
#~ "                        <td>&nbsp;Delete Object</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Del</strong></td>\n"
#~ "                        <td>&nbsp;Alternate: Delete Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>'`'</strong></td>\n"
#~ "                        <td>&nbsp;(left to Key_1)Toogle Notebook Area "
#~ "(Left Side)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>SPACE</strong></td>\n"
#~ "                        <td>&nbsp;En(Dis)able Obj Plot</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Escape</strong></td>\n"
#~ "                        <td>&nbsp;Deselects all objects</td>\n"
#~ "                    </tr>\n"
#~ "                </tbody>\n"
#~ "            </table>\n"
#~ "    \n"
#~ "            "
#~ msgstr ""
#~ "<b>General Shortcut list</b><br>\n"
#~ "            <table border=\"0\" cellpadding=\"0\" cellspacing=\"0\" style="
#~ "\"width:283px\">\n"
#~ "                <tbody>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\" width=\"89\"><strong>F3</"
#~ "strong></td>\n"
#~ "                        <td width=\"194\"><span style=\"color:"
#~ "#006400\"><strong>&nbsp;SHOW SHORTCUT LIST</strong></span></td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>1</strong></td>\n"
#~ "                        <td>&nbsp;Switch to Project Tab</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>2</strong></td>\n"
#~ "                        <td>&nbsp;Switch to Selected Tab</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>3</strong></td>\n"
#~ "                        <td>&nbsp;Switch to Tool Tab</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>B</strong></td>\n"
#~ "                        <td>&nbsp;New Gerber</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>E</strong></td>\n"
#~ "                        <td>&nbsp;Edit Object (if selected)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>G</strong></td>\n"
#~ "                        <td>&nbsp;Grid On/Off</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>J</strong></td>\n"
#~ "                        <td>&nbsp;Jump to Coordinates</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>L</strong></td>\n"
#~ "                        <td>&nbsp;New Excellon</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>M</strong></td>\n"
#~ "                        <td>&nbsp;Move Obj</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>N</strong></td>\n"
#~ "                        <td>&nbsp;New Geometry</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>O</strong></td>\n"
#~ "                        <td>&nbsp;Set Origin</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Q</strong></td>\n"
#~ "                        <td>&nbsp;Change Units</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>P</strong></td>\n"
#~ "                        <td>&nbsp;Open Properties Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>R</strong></td>\n"
#~ "                        <td>&nbsp;Rotate by 90 degree CW</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>S</strong></td>\n"
#~ "                        <td>&nbsp;Shell Toggle</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>T</strong></td>\n"
#~ "                        <td>&nbsp;Add a Tool (when in Geometry Selected "
#~ "Tab or in Tools NCC or Tools Paint)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>V</strong></td>\n"
#~ "                        <td>&nbsp;Zoom Fit</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>X</strong></td>\n"
#~ "                        <td>&nbsp;Flip on X_axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Y</strong></td>\n"
#~ "                        <td>&nbsp;Flip on Y_axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>&#39;-&#39;</strong></"
#~ "td>\n"
#~ "                        <td>&nbsp;Zoom Out</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>&#39;=&#39;</strong></"
#~ "td>\n"
#~ "                        <td>&nbsp;Zoom In</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>CTRL+A</strong></td>\n"
#~ "                        <td>&nbsp;Select All</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>CTRL+C</strong></td>\n"
#~ "                        <td>&nbsp;Copy Obj</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>CTRL+E</strong></td>\n"
#~ "                        <td>&nbsp;Open Excellon File</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>CTRL+G</strong></td>\n"
#~ "                        <td>&nbsp;Open Gerber File</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>CTRL+N</strong></td>\n"
#~ "                        <td>&nbsp;New Project</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>CTRL+M</strong></td>\n"
#~ "                        <td>&nbsp;Measurement Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>CTRL+O</strong></td>\n"
#~ "                        <td>&nbsp;Open Project</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>CTRL+S</strong></td>\n"
#~ "                        <td>&nbsp;Save Project As</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>CTRL+F10</strong></td>\n"
#~ "                        <td>&nbsp;Toggle Plot Area</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>SHIFT+C</strong></td>\n"
#~ "                        <td>&nbsp;Copy Obj_Name</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>SHIFT+E</strong></td>\n"
#~ "                        <td>&nbsp;Toggle Code Editor</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>SHIFT+G</strong></td>\n"
#~ "                        <td>&nbsp;Toggle the axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>SHIFT+P</strong></td>\n"
#~ "                        <td>&nbsp;Open Preferences Window</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>SHIFT+R</strong></td>\n"
#~ "                        <td>&nbsp;Rotate by 90 degree CCW</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>SHIFT+S</strong></td>\n"
#~ "                        <td>&nbsp;Run a Script</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>SHIFT+W</strong></td>\n"
#~ "                        <td>&nbsp;Toggle the workspace</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>SHIFT+X</strong></td>\n"
#~ "                        <td>&nbsp;Skew on X axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>SHIFT+Y</strong></td>\n"
#~ "                        <td>&nbsp;Skew on Y axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+C</strong></td>\n"
#~ "                        <td>&nbsp;Calculators Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+D</strong></td>\n"
#~ "                        <td>&nbsp;2-Sided PCB Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+K</strong></td>\n"
#~ "                        <td>&nbsp;Solder Paste Dispensing Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+L</strong></td>\n"
#~ "                        <td>&nbsp;Film PCB Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+N</strong></td>\n"
#~ "                        <td>&nbsp;Non-Copper Clearing Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+P</strong></td>\n"
#~ "                        <td>&nbsp;Paint Area Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+Q</strong></td>\n"
#~ "                        <td>&nbsp;PDF Import Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+R</strong></td>\n"
#~ "                        <td>&nbsp;Transformations Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+S</strong></td>\n"
#~ "                        <td>&nbsp;View File Source</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+U</strong></td>\n"
#~ "                        <td>&nbsp;Cutout PCB Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+1</strong></td>\n"
#~ "                        <td>&nbsp;Enable all Plots</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+2</strong></td>\n"
#~ "                        <td>&nbsp;Disable all Plots</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+3</strong></td>\n"
#~ "                        <td>&nbsp;Disable Non-selected Plots</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+F10</strong></td>\n"
#~ "                        <td>&nbsp;Toggle Full Screen</td>\n"
#~ "                    </tr>                 \n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>CTRL+ALT+X</strong></"
#~ "td>\n"
#~ "                        <td>&nbsp;Abort current task (gracefully)</td>\n"
#~ "                    </tr>                    \n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>F1</strong></td>\n"
#~ "                        <td>&nbsp;Open Online Manual</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>F4</strong></td>\n"
#~ "                        <td>&nbsp;Open Online Tutorials</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Del</strong></td>\n"
#~ "                        <td>&nbsp;Delete Object</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Del</strong></td>\n"
#~ "                        <td>&nbsp;Alternate: Delete Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>'`'</strong></td>\n"
#~ "                        <td>&nbsp;(left to Key_1)Toogle Notebook Area "
#~ "(Left Side)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>SPACE</strong></td>\n"
#~ "                        <td>&nbsp;En(Dis)able Obj Plot</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Escape</strong></td>\n"
#~ "                        <td>&nbsp;Deselects all objects</td>\n"
#~ "                    </tr>\n"
#~ "                </tbody>\n"
#~ "            </table>\n"
#~ "    \n"
#~ "            "

#~ msgid ""
#~ "<b>Editor Shortcut list</b><br>\n"
#~ "            <br>\n"
#~ "            <strong><span style=\"color:#0000ff\">GEOMETRY EDITOR</span></"
#~ "strong><br>\n"
#~ "    \n"
#~ "            <table border=\"0\" cellpadding=\"0\" cellspacing=\"0\" style="
#~ "\"width:283px\">\n"
#~ "                <tbody>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\" width=\"89\"><strong>A</"
#~ "strong></td>\n"
#~ "                        <td width=\"194\">&nbsp;Draw an Arc</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>B</strong></td>\n"
#~ "                        <td>&nbsp;Buffer Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>C</strong></td>\n"
#~ "                        <td>&nbsp;Copy Geo Item</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>D</strong></td>\n"
#~ "                        <td>&nbsp;Within Add Arc will toogle the ARC "
#~ "direction: CW or CCW</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>E</strong></td>\n"
#~ "                        <td>&nbsp;Polygon Intersection Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>I</strong></td>\n"
#~ "                        <td>&nbsp;Paint Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>J</strong></td>\n"
#~ "                        <td>&nbsp;Jump to Location (x, y)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>K</strong></td>\n"
#~ "                        <td>&nbsp;Toggle Corner Snap</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>M</strong></td>\n"
#~ "                        <td>&nbsp;Move Geo Item</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>M</strong></td>\n"
#~ "                        <td>&nbsp;Within Add Arc will cycle through the "
#~ "ARC modes</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>N</strong></td>\n"
#~ "                        <td>&nbsp;Draw a Polygon</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>O</strong></td>\n"
#~ "                        <td>&nbsp;Draw a Circle</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>P</strong></td>\n"
#~ "                        <td>&nbsp;Draw a Path</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>R</strong></td>\n"
#~ "                        <td>&nbsp;Draw Rectangle</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>S</strong></td>\n"
#~ "                        <td>&nbsp;Polygon Substraction Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>T</strong></td>\n"
#~ "                        <td>&nbsp;Add Text Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>U</strong></td>\n"
#~ "                        <td>&nbsp;Polygon Union Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>X</strong></td>\n"
#~ "                        <td>&nbsp;Flip shape on X axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Y</strong></td>\n"
#~ "                        <td>&nbsp;Flip shape on Y axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>SHIFT+X</strong></td>\n"
#~ "                        <td>&nbsp;Skew shape on X axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>SHIFT+Y</strong></td>\n"
#~ "                        <td>&nbsp;Skew shape on Y axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+R</strong></td>\n"
#~ "                        <td>&nbsp;Editor Transformation Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+X</strong></td>\n"
#~ "                        <td>&nbsp;Offset shape on X axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+Y</strong></td>\n"
#~ "                        <td>&nbsp;Offset shape on Y axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>CTRL+M</strong></td>\n"
#~ "                        <td>&nbsp;Measurement Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>CTRL+S</strong></td>\n"
#~ "                        <td>&nbsp;Save Object and Exit Editor</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>CTRL+X</strong></td>\n"
#~ "                        <td>&nbsp;Polygon Cut Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Space</strong></td>\n"
#~ "                        <td>&nbsp;Rotate Geometry</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ENTER</strong></td>\n"
#~ "                        <td>&nbsp;Finish drawing for certain tools</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ESC</strong></td>\n"
#~ "                        <td>&nbsp;Abort and return to Select</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Del</strong></td>\n"
#~ "                        <td>&nbsp;Delete Shape</td>\n"
#~ "                    </tr>\n"
#~ "                </tbody>\n"
#~ "            </table>\n"
#~ "            <br>\n"
#~ "            <br>\n"
#~ "            <strong><span style=\"color:#ff0000\">EXCELLON EDITOR</span></"
#~ "strong><br>\n"
#~ "            <table border=\"0\" cellpadding=\"0\" cellspacing=\"0\" style="
#~ "\"width:283px\">\n"
#~ "                <tbody>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\" width=\"89\"><strong>A</"
#~ "strong></td>\n"
#~ "                        <td width=\"194\">&nbsp;Add Drill Array</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>C</strong></td>\n"
#~ "                        <td>&nbsp;Copy Drill(s)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>D</strong></td>\n"
#~ "                        <td>&nbsp;Add Drill</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>J</strong></td>\n"
#~ "                        <td>&nbsp;Jump to Location (x, y)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>M</strong></td>\n"
#~ "                        <td>&nbsp;Move Drill(s)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\" width=\"89\"><strong>Q</"
#~ "strong></td>\n"
#~ "                        <td width=\"194\">&nbsp;Add Slot Array</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>R</strong></td>\n"
#~ "                        <td>&nbsp;Resize Drill(s)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>T</strong></td>\n"
#~ "                        <td>&nbsp;Add a new Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\" width=\"89\"><strong>W</"
#~ "strong></td>\n"
#~ "                        <td width=\"194\">&nbsp;Add Slot</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Del</strong></td>\n"
#~ "                        <td>&nbsp;Delete Drill(s)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Del</strong></td>\n"
#~ "                        <td>&nbsp;Alternate: Delete Tool(s)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ESC</strong></td>\n"
#~ "                        <td>&nbsp;Abort and return to Select</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>CTRL+S</strong></td>\n"
#~ "                        <td>&nbsp;Save Object and Exit Editor</td>\n"
#~ "                    </tr>\n"
#~ "                </tbody>\n"
#~ "            </table>\n"
#~ "            <br>\n"
#~ "            <br>\n"
#~ "            <strong><span style=\"color:#00ff00\">GERBER EDITOR</span></"
#~ "strong><br>\n"
#~ "            <table border=\"0\" cellpadding=\"0\" cellspacing=\"0\" style="
#~ "\"width:283px\">\n"
#~ "                <tbody>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\" width=\"89\"><strong>A</"
#~ "strong></td>\n"
#~ "                        <td width=\"194\">&nbsp;Add Pad Array</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>B</strong></td>\n"
#~ "                        <td>&nbsp;Buffer</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>C</strong></td>\n"
#~ "                        <td>&nbsp;Copy</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>D</strong></td>\n"
#~ "                        <td>&nbsp;Add Disc</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>E</strong></td>\n"
#~ "                        <td>&nbsp;Add SemiDisc</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>J</strong></td>\n"
#~ "                        <td>&nbsp;Jump to Location (x, y)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>M</strong></td>\n"
#~ "                        <td>&nbsp;Move</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>N</strong></td>\n"
#~ "                        <td>&nbsp;Add Region</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>P</strong></td>\n"
#~ "                        <td>&nbsp;Add Pad</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>R</strong></td>\n"
#~ "                        <td>&nbsp;Within Track & Region Tools will cycle "
#~ "in REVERSE the bend modes</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>S</strong></td>\n"
#~ "                        <td>&nbsp;Scale</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>T</strong></td>\n"
#~ "                        <td>&nbsp;Add Track</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>T</strong></td>\n"
#~ "                        <td>&nbsp;Within Track & Region Tools will cycle "
#~ "FORWARD the bend modes</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Del</strong></td>\n"
#~ "                        <td>&nbsp;Delete</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Del</strong></td>\n"
#~ "                        <td>&nbsp;Alternate: Delete Apertures</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ESC</strong></td>\n"
#~ "                        <td>&nbsp;Abort and return to Select</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>CTRL+E</strong></td>\n"
#~ "                        <td>&nbsp;Eraser Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>CTRL+S</strong></td>\n"
#~ "                        <td>&nbsp;Save Object and Exit Editor</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                     <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+A</strong></td>\n"
#~ "                        <td>&nbsp;Mark Area Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+N</strong></td>\n"
#~ "                        <td>&nbsp;Poligonize Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+R</strong></td>\n"
#~ "                        <td>&nbsp;Transformation Tool</td>\n"
#~ "                    </tr>\n"
#~ "                </tbody>\n"
#~ "            </table>\n"
#~ "                    "
#~ msgstr ""
#~ "<b>Editor Shortcut list</b><br>\n"
#~ "            <br>\n"
#~ "            <strong><span style=\"color:#0000ff\">GEOMETRY EDITOR</span></"
#~ "strong><br>\n"
#~ "    \n"
#~ "            <table border=\"0\" cellpadding=\"0\" cellspacing=\"0\" style="
#~ "\"width:283px\">\n"
#~ "                <tbody>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\" width=\"89\"><strong>A</"
#~ "strong></td>\n"
#~ "                        <td width=\"194\">&nbsp;Draw an Arc</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>B</strong></td>\n"
#~ "                        <td>&nbsp;Buffer Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>C</strong></td>\n"
#~ "                        <td>&nbsp;Copy Geo Item</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>D</strong></td>\n"
#~ "                        <td>&nbsp;Within Add Arc will toogle the ARC "
#~ "direction: CW or CCW</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>E</strong></td>\n"
#~ "                        <td>&nbsp;Polygon Intersection Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>I</strong></td>\n"
#~ "                        <td>&nbsp;Paint Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>J</strong></td>\n"
#~ "                        <td>&nbsp;Jump to Location (x, y)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>K</strong></td>\n"
#~ "                        <td>&nbsp;Toggle Corner Snap</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>M</strong></td>\n"
#~ "                        <td>&nbsp;Move Geo Item</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>M</strong></td>\n"
#~ "                        <td>&nbsp;Within Add Arc will cycle through the "
#~ "ARC modes</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>N</strong></td>\n"
#~ "                        <td>&nbsp;Draw a Polygon</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>O</strong></td>\n"
#~ "                        <td>&nbsp;Draw a Circle</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>P</strong></td>\n"
#~ "                        <td>&nbsp;Draw a Path</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>R</strong></td>\n"
#~ "                        <td>&nbsp;Draw Rectangle</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>S</strong></td>\n"
#~ "                        <td>&nbsp;Polygon Substraction Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>T</strong></td>\n"
#~ "                        <td>&nbsp;Add Text Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>U</strong></td>\n"
#~ "                        <td>&nbsp;Polygon Union Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>X</strong></td>\n"
#~ "                        <td>&nbsp;Flip shape on X axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Y</strong></td>\n"
#~ "                        <td>&nbsp;Flip shape on Y axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>SHIFT+X</strong></td>\n"
#~ "                        <td>&nbsp;Skew shape on X axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>SHIFT+Y</strong></td>\n"
#~ "                        <td>&nbsp;Skew shape on Y axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+R</strong></td>\n"
#~ "                        <td>&nbsp;Editor Transformation Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+X</strong></td>\n"
#~ "                        <td>&nbsp;Offset shape on X axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+Y</strong></td>\n"
#~ "                        <td>&nbsp;Offset shape on Y axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>CTRL+M</strong></td>\n"
#~ "                        <td>&nbsp;Measurement Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>CTRL+S</strong></td>\n"
#~ "                        <td>&nbsp;Save Object and Exit Editor</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>CTRL+X</strong></td>\n"
#~ "                        <td>&nbsp;Polygon Cut Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Space</strong></td>\n"
#~ "                        <td>&nbsp;Rotate Geometry</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ENTER</strong></td>\n"
#~ "                        <td>&nbsp;Finish drawing for certain tools</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ESC</strong></td>\n"
#~ "                        <td>&nbsp;Abort and return to Select</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Del</strong></td>\n"
#~ "                        <td>&nbsp;Delete Shape</td>\n"
#~ "                    </tr>\n"
#~ "                </tbody>\n"
#~ "            </table>\n"
#~ "            <br>\n"
#~ "            <br>\n"
#~ "            <strong><span style=\"color:#ff0000\">EXCELLON EDITOR</span></"
#~ "strong><br>\n"
#~ "            <table border=\"0\" cellpadding=\"0\" cellspacing=\"0\" style="
#~ "\"width:283px\">\n"
#~ "                <tbody>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\" width=\"89\"><strong>A</"
#~ "strong></td>\n"
#~ "                        <td width=\"194\">&nbsp;Add Drill Array</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>C</strong></td>\n"
#~ "                        <td>&nbsp;Copy Drill(s)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>D</strong></td>\n"
#~ "                        <td>&nbsp;Add Drill</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>J</strong></td>\n"
#~ "                        <td>&nbsp;Jump to Location (x, y)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>M</strong></td>\n"
#~ "                        <td>&nbsp;Move Drill(s)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\" width=\"89\"><strong>Q</"
#~ "strong></td>\n"
#~ "                        <td width=\"194\">&nbsp;Add Slot Array</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>R</strong></td>\n"
#~ "                        <td>&nbsp;Resize Drill(s)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>T</strong></td>\n"
#~ "                        <td>&nbsp;Add a new Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\" width=\"89\"><strong>W</"
#~ "strong></td>\n"
#~ "                        <td width=\"194\">&nbsp;Add Slot</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Del</strong></td>\n"
#~ "                        <td>&nbsp;Delete Drill(s)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Del</strong></td>\n"
#~ "                        <td>&nbsp;Alternate: Delete Tool(s)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ESC</strong></td>\n"
#~ "                        <td>&nbsp;Abort and return to Select</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>CTRL+S</strong></td>\n"
#~ "                        <td>&nbsp;Save Object and Exit Editor</td>\n"
#~ "                    </tr>\n"
#~ "                </tbody>\n"
#~ "            </table>\n"
#~ "            <br>\n"
#~ "            <br>\n"
#~ "            <strong><span style=\"color:#00ff00\">GERBER EDITOR</span></"
#~ "strong><br>\n"
#~ "            <table border=\"0\" cellpadding=\"0\" cellspacing=\"0\" style="
#~ "\"width:283px\">\n"
#~ "                <tbody>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\" width=\"89\"><strong>A</"
#~ "strong></td>\n"
#~ "                        <td width=\"194\">&nbsp;Add Pad Array</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>B</strong></td>\n"
#~ "                        <td>&nbsp;Buffer</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>C</strong></td>\n"
#~ "                        <td>&nbsp;Copy</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>D</strong></td>\n"
#~ "                        <td>&nbsp;Add Disc</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>E</strong></td>\n"
#~ "                        <td>&nbsp;Add SemiDisc</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>J</strong></td>\n"
#~ "                        <td>&nbsp;Jump to Location (x, y)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>M</strong></td>\n"
#~ "                        <td>&nbsp;Move</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>N</strong></td>\n"
#~ "                        <td>&nbsp;Add Region</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>P</strong></td>\n"
#~ "                        <td>&nbsp;Add Pad</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>R</strong></td>\n"
#~ "                        <td>&nbsp;Within Track & Region Tools will cycle "
#~ "in REVERSE the bend modes</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>S</strong></td>\n"
#~ "                        <td>&nbsp;Scale</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>T</strong></td>\n"
#~ "                        <td>&nbsp;Add Track</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>T</strong></td>\n"
#~ "                        <td>&nbsp;Within Track & Region Tools will cycle "
#~ "FORWARD the bend modes</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Del</strong></td>\n"
#~ "                        <td>&nbsp;Delete</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Del</strong></td>\n"
#~ "                        <td>&nbsp;Alternate: Delete Apertures</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ESC</strong></td>\n"
#~ "                        <td>&nbsp;Abort and return to Select</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>CTRL+E</strong></td>\n"
#~ "                        <td>&nbsp;Eraser Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>CTRL+S</strong></td>\n"
#~ "                        <td>&nbsp;Save Object and Exit Editor</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                     <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+A</strong></td>\n"
#~ "                        <td>&nbsp;Mark Area Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+N</strong></td>\n"
#~ "                        <td>&nbsp;Poligonize Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+R</strong></td>\n"
#~ "                        <td>&nbsp;Transformation Tool</td>\n"
#~ "                    </tr>\n"
#~ "                </tbody>\n"
#~ "            </table>\n"
#~ "                    "

#~ msgid "[success] Done."
#~ msgstr "[success] Done."

#~ msgid "[WARNING_NOTCL] Cancelled."
#~ msgstr "[WARNING_NOTCL] Cancelled."

#~ msgid "[success] Added new tool with dia: {dia} {units}"
#~ msgstr "[success] Added new tool with dia: {dia} {units}"

#~ msgid "[WARNING_NOTCL] Application is saving the project. Please wait ..."
#~ msgstr "[WARNING_NOTCL] Application is saving the project. Please wait ..."

#~ msgid "<b>%s:</b>"
#~ msgstr "<b>%s:</b>"

#~ msgid "%s:"
#~ msgstr "%s:"

#~| msgid "[ERROR_NOTCL] Object not found: %s"
#~ msgid "Object not found: %s"
#~ msgstr "Object not found: %s"

#~ msgid "[success] Opened: %s"
#~ msgstr "[success] Opened: %s"

#~ msgid "[success] Paint All Done."
#~ msgstr "[success] Paint All Done."

#~| msgid ""
#~| "[ERROR] Could not do Paint All. Try a different combination of "
#~| "parameters. Or a different Method of paint\n"
#~| "%s"
#~ msgid ""
#~ "Could not do Paint All. Try a different combination of parameters. Or a "
#~ "different Method of paint\n"
#~ "%s"
#~ msgstr ""
#~ "Could not do Paint All. Try a different combination of parameters. Or a "
#~ "different Method of paint\n"
#~ "%s"

#~| msgid "[success] Paint All Done."
#~ msgid "[success] Paint Area Done."
#~ msgstr "[success] Paint Area Done."

#~ msgid "Generating panel ... Please wait."
#~ msgstr "Generating panel ... Please wait."

#~ msgid "...proccessing... [%s]"
#~ msgstr "...proccessing... [%s]"

#~ msgid "Parsing aperture %s geometry ..."
#~ msgstr "Parsing aperture %s geometry ..."

#~ msgid "[success] Skew on the %s axis done ..."
#~ msgstr "[success] Skew on the %s axis done ..."

#~ msgid "[ERROR_NOTCL] Could not load defaults file."
#~ msgstr "[ERROR_NOTCL] Could not load defaults file."

#~ msgid "[ERROR_NOTCL] Failed to parse defaults file."
#~ msgstr "[ERROR_NOTCL] Failed to parse defaults file."

#~ msgid "[ERROR_NOTCL] An internal error has ocurred. See shell.\n"
#~ msgstr "[ERROR_NOTCL] An internal error has ocurred. See shell.\n"

#~ msgid "[success] Defaults saved."
#~ msgstr "[success] Defaults saved."

#~ msgid "[success] Converted units to %s"
#~ msgstr "[success] Converted units to %s"

#~ msgid "[WARNING_NOTCL] Export Code cancelled."
#~ msgstr "[WARNING_NOTCL] Export Code cancelled."

#~ msgid "[success] Origin set ..."
#~ msgstr "[success] Origin set ..."

#~ msgid "[success] Skew on X axis done."
#~ msgstr "[success] Skew on X axis done."

#~ msgid "[success] Skew on Y axis done."
#~ msgstr "[success] Skew on Y axis done."

#~ msgid "[success] New Grid added ..."
#~ msgstr "[success] New Grid added ..."

#~ msgid "[WARNING_NOTCL] Open Gerber cancelled."
#~ msgstr "[WARNING_NOTCL] Open Gerber cancelled."

#~ msgid "[WARNING_NOTCL] Open G-Code cancelled."
#~ msgstr "[WARNING_NOTCL] Open G-Code cancelled."

#~ msgid "[WARNING_NOTCL] Open Project cancelled."
#~ msgstr "[WARNING_NOTCL] Open Project cancelled."

#~ msgid "[WARNING_NOTCL] Open Config cancelled."
#~ msgstr "[WARNING_NOTCL] Open Config cancelled."

#~ msgid "[WARNING_NOTCL] No object selected."
#~ msgstr "[WARNING_NOTCL] No object selected."

#~ msgid "[WARNING_NOTCL] Export SVG cancelled."
#~ msgstr "[WARNING_NOTCL] Export SVG cancelled."

#~ msgid "[WARNING_NOTCL] Export Excellon cancelled."
#~ msgstr "[WARNING_NOTCL] Export Excellon cancelled."

#~ msgid "[WARNING_NOTCL] Export Gerber cancelled."
#~ msgstr "[WARNING_NOTCL] Export Gerber cancelled."

#~ msgid "[WARNING_NOTCL] Export DXF cancelled."
#~ msgstr "[WARNING_NOTCL] Export DXF cancelled."

#~ msgid "[WARNING_NOTCL] Open SVG cancelled."
#~ msgstr "[WARNING_NOTCL] Open SVG cancelled."

#~ msgid "[WARNING_NOTCL] Open DXF cancelled."
#~ msgstr "[WARNING_NOTCL] Open DXF cancelled."

#~ msgid "[WARNING_NOTCL] No object Box. Using instead %s"
#~ msgstr "[WARNING_NOTCL] No object Box. Using instead %s"

#~ msgid "[ERROR_NOTCL] Failed to parse file: {name}. {error}"
#~ msgstr "[ERROR_NOTCL] Failed to parse file: {name}. {error}"

#~ msgid "[ERROR_NOTCL] An internal error has occurred. See shell.\n"
#~ msgstr "[ERROR_NOTCL] An internal error has occurred. See shell.\n"

#~ msgid "[ERROR_NOTCL] Failed to verify project file: %s. Retry to save it."
#~ msgstr "[ERROR_NOTCL] Failed to verify project file: %s. Retry to save it."

#~ msgid ""
#~ "[ERROR_NOTCL] Failed to parse saved project file: %s. Retry to save it."
#~ msgstr ""
#~ "[ERROR_NOTCL] Failed to parse saved project file: %s. Retry to save it."

#~ msgid "[ERROR_NOTCL] Failed to save project file: %s. Retry to save it."
#~ msgstr "[ERROR_NOTCL] Failed to save project file: %s. Retry to save it."

#~ msgid "[ERROR_NOTCL] Wrong value format entered, use a number."
#~ msgstr "[ERROR_NOTCL] Wrong value format entered, use a number."

#~ msgid "[ERROR_NOTCL] Cancelled. Empty file, it has no geometry..."
#~ msgstr "[ERROR_NOTCL] Cancelled. Empty file, it has no geometry..."

#~ msgid "[WARNING_NOTCL] Export Machine Code cancelled ..."
#~ msgstr "[WARNING_NOTCL] Export Machine Code cancelled ..."

#~ msgid "[WARNING_NOTCL] No such file or directory"
#~ msgstr "[WARNING_NOTCL] No such file or directory"

#~ msgid "[ERROR_NOTCL] The value is mistyped. Check the value. %s"
#~ msgstr "[ERROR_NOTCL] The value is mistyped. Check the value. %s"

#~ msgid "[ERROR_NOTCL] Cancelled."
#~ msgstr "[ERROR_NOTCL] Cancelled."

#~ msgid "Tool Dia:"
#~ msgstr "Tool Dia:"

#~ msgid "Nr of drills:"
#~ msgstr "Nr of drills:"

#~ msgid "Direction:"
#~ msgstr "Direction:"

#~ msgid "Pitch:"
#~ msgstr "Pitch:"

#~ msgid "Length:"
#~ msgstr "Length:"

#~ msgid "Nr of slots:"
#~ msgstr "Nr of slots:"

#~ msgid "[success] Deleted tool with dia: {del_dia} {units}"
#~ msgstr "[success] Deleted tool with dia: {del_dia} {units}"

#~ msgid "Tool dia:"
#~ msgstr "Tool dia:"

#~ msgid "Overlap Rate:"
#~ msgstr "Overlap Rate:"

#~ msgid "Method:"
#~ msgstr "Method:"

#~ msgid "[ERROR_NOTCL] Wrong value format entered for Rotate, use a number."
#~ msgstr "[ERROR_NOTCL] Wrong value format entered for Rotate, use a number."

#~ msgid "[ERROR_NOTCL] Wrong value format entered for Skew X, use a number."
#~ msgstr "[ERROR_NOTCL] Wrong value format entered for Skew X, use a number."

#~ msgid "[ERROR_NOTCL] Wrong value format entered for Skew Y, use a number."
#~ msgstr "[ERROR_NOTCL] Wrong value format entered for Skew Y, use a number."

#~ msgid "[ERROR_NOTCL] Wrong value format entered for Scale X, use a number."
#~ msgstr "[ERROR_NOTCL] Wrong value format entered for Scale X, use a number."

#~ msgid "[ERROR_NOTCL] Wrong value format entered for Scale Y, use a number."
#~ msgstr "[ERROR_NOTCL] Wrong value format entered for Scale Y, use a number."

#~ msgid "[ERROR_NOTCL] Wrong value format entered for Offset X, use a number."
#~ msgstr ""
#~ "[ERROR_NOTCL] Wrong value format entered for Offset X, use a number."

#~ msgid "[ERROR_NOTCL] Wrong value format entered for Offset Y, use a number."
#~ msgstr ""
#~ "[ERROR_NOTCL] Wrong value format entered for Offset Y, use a number."

#~ msgid "[success] Flip on the Y axis done ..."
#~ msgstr "[success] Flip on the Y axis done ..."

#~ msgid "[success] Flip on the X axis done ..."
#~ msgstr "[success] Flip on the X axis done ..."

#~ msgid "[success] Offset on the %s axis done ..."
#~ msgstr "[success] Offset on the %s axis done ..."

#~ msgid ""
#~ "[WARNING_NOTCL] Editing MultiGeo Geometry, tool: {tool} with diameter: "
#~ "{dia}"
#~ msgstr ""
#~ "[WARNING_NOTCL] Editing MultiGeo Geometry, tool: {tool} with diameter: "
#~ "{dia}"

#~ msgid "Clear GUI Settings:"
#~ msgstr "Clear GUI Settings:"

#~ msgid "Duration:"
#~ msgstr "Duration:"

#~ msgid "Fast Plunge:"
#~ msgstr "Fast Plunge:"

#~ msgid "Linear Dir.:"
#~ msgstr "Linear Dir.:"

#~ msgid "Plot kind:"
#~ msgstr "Plot kind:"

#~ msgid ""
#~ "Select from the Tools Table above\n"
#~ "the tools you want to include."
#~ msgstr ""
#~ "Select from the Tools Table above\n"
#~ "the tools you want to include."

#~ msgid ""
#~ "[WARNING_NOTCL] Tool Diameter is zero value. Change it to a positive real "
#~ "number."
#~ msgstr ""
#~ "[WARNING_NOTCL] Tool Diameter is zero value. Change it to a positive real "
#~ "number."

#~ msgid "[success] Gerber %s was mirrored..."
#~ msgstr "[success] Gerber %s was mirrored..."

#~ msgid "[success] Excellon %s was mirrored..."
#~ msgstr "[success] Excellon %s was mirrored..."

#~ msgid "[success] Geometry %s was mirrored..."
#~ msgstr "[success] Geometry %s was mirrored..."

#~ msgid "[WARNING_NOTCL] No object(s) selected."
#~ msgstr "[WARNING_NOTCL] No object(s) selected."

#~ msgid "[success] %s object was moved ..."
#~ msgstr "[success] %s object was moved ..."

#~ msgid "[WARNING_NOTCL] Object(s) not selected"
#~ msgstr "[WARNING_NOTCL] Object(s) not selected"

#~ msgid "[WARNING_NOTCL] Buffering ..."
#~ msgstr "[WARNING_NOTCL] Buffering ..."

#~ msgid "[success] Non-Copper Clearing with ToolDia = %s started."
#~ msgstr "[success] Non-Copper Clearing with ToolDia = %s started."

#~ msgid "[ERROR_NOTCL] NCCTool.clear_non_copper() --> %s"
#~ msgstr "[ERROR_NOTCL] NCCTool.clear_non_copper() --> %s"

#~ msgid "[success] NCC Tool finished."
#~ msgstr "[success] NCC Tool finished."

#~ msgid ""
#~ "[WARNING_NOTCL] NCC Tool finished but some PCB features could not be "
#~ "cleared. Check the result."
#~ msgstr ""
#~ "[WARNING_NOTCL] NCC Tool finished but some PCB features could not be "
#~ "cleared. Check the result."

#~ msgid "[success] Non-Copper Rest Clearing with ToolDia = %s started."
#~ msgstr "[success] Non-Copper Rest Clearing with ToolDia = %s started."

#~ msgid "[ERROR_NOTCL] NCCTool.clear_non_copper_rest() --> %s"
#~ msgstr "[ERROR_NOTCL] NCCTool.clear_non_copper_rest() --> %s"

#~ msgid ""
#~ "[ERROR_NOTCL] NCC Tool finished but could not clear the object with "
#~ "current settings."
#~ msgstr ""
#~ "[ERROR_NOTCL] NCC Tool finished but could not clear the object with "
#~ "current settings."

#~ msgid "[WARNING_NOTCL] Open PDF cancelled."
#~ msgstr "[WARNING_NOTCL] Open PDF cancelled."

#~ msgid "[ERROR_NOTCL] Open PDF file failed."
#~ msgstr "[ERROR_NOTCL] Open PDF file failed."

#~ msgid "[success] Rendered: %s"
#~ msgstr "[success] Rendered: %s"

#~ msgid ""
#~ "How to select the polygons to paint.<BR>Options:<BR>- <B>Single Polygons</"
#~ "B>: left mouse click on the polygon to be painted.<BR>- <B>Area "
#~ "Selection</B>: left mouse click to start selection of the area to be "
#~ "painted.<BR>- <B>All Polygons</B>: paint all polygons.<BR>- <B>Reference "
#~ "Object</B>: paint an area described by an external reference object."
#~ msgstr ""
#~ "How to select the polygons to paint.<BR>Options:<BR>- <B>Single Polygons</"
#~ "B>: left mouse click on the polygon to be painted.<BR>- <B>Area "
#~ "Selection</B>: left mouse click to start selection of the area to be "
#~ "painted.<BR>- <B>All Polygons</B>: paint all polygons.<BR>- <B>Reference "
#~ "Object</B>: paint an area described by an external reference object."

#~ msgid ""
#~ "[ERROR_NOTCL] There is no Painting Geometry in the file.\n"
#~ "Usually it means that the tool diameter is too big for the painted "
#~ "geometry.\n"
#~ "Change the painting parameters and try again."
#~ msgstr ""
#~ "[ERROR_NOTCL] There is no Painting Geometry in the file.\n"
#~ "Usually it means that the tool diameter is too big for the painted "
#~ "geometry.\n"
#~ "Change the painting parameters and try again."

#~ msgid "[WARNING_NOTCL]No object Box. Using instead %s"
#~ msgstr "[WARNING_NOTCL]No object Box. Using instead %s"

#~ msgid "[success] Imported: %s"
#~ msgstr "[success] Imported: %s"

#~ msgid "[ERROR_NOTCL] Generating new object failed."
#~ msgstr "[ERROR_NOTCL] Generating new object failed."

#~ msgid "[success] Created: %s"
#~ msgstr "[success] Created: %s"

#~ msgid "[success] Rotate done ..."
#~ msgstr "[success] Rotate done ..."

#~ msgid ""
#~ "When choosing the 'Itself' option the non copper clearing extent\n"
#~ "is based on the object that is copper cleared.\n"
#~ " Choosing the 'Box' option will do non copper clearing within the box\n"
#~ "specified by another object different than the one that is copper cleared."
#~ msgstr ""
#~ "When choosing the 'Itself' option the non copper clearing extent\n"
#~ "is based on the object that is copper cleared.\n"
#~ " Choosing the 'Box' option will do non copper clearing within the box\n"
#~ "specified by another object different than the one that is copper cleared."

#~ msgid ""
#~ "How to select the polygons to paint.<BR>Options:<BR>- <B>Single</B>: left "
#~ "mouse click on the polygon to be painted.<BR>- <B>Area</B>: left mouse "
#~ "click to start selection of the area to be painted.<BR>- <B>All</B>: "
#~ "paint all polygons.<BR>- <B>Ref</B>: paint an area described by an "
#~ "external reference object."
#~ msgstr ""
#~ "How to select the polygons to paint.<BR>Options:<BR>- <B>Single</B>: left "
#~ "mouse click on the polygon to be painted.<BR>- <B>Area</B>: left mouse "
#~ "click to start selection of the area to be painted.<BR>- <B>All</B>: "
#~ "paint all polygons.<BR>- <B>Ref</B>: paint an area described by an "
#~ "external reference object."

#~ msgid "Geometry object to be painted.                        "
#~ msgstr "Geometry object to be painted.                        "

#~ msgid ""
#~ "After clicking here, click inside<BR>the polygon you wish to be painted "
#~ "if <B>Single</B> is selected.<BR>If <B>Area</B> is selected, then the "
#~ "selection of the area to be painted<BR>will be initiated by a first click "
#~ "and finished by the second mouse click.<BR>If <B>All</B>  is selected "
#~ "then the Paint will start after click.<BR>If <B>Ref</B>  is selected then "
#~ "the Paint will start after click,<BR>and the painted area will be "
#~ "described by a selected object.<BR>A new Geometry object with the tool "
#~ "paths will be created."
#~ msgstr ""
#~ "After clicking here, click inside<BR>the polygon you wish to be painted "
#~ "if <B>Single</B> is selected.<BR>If <B>Area</B> is selected, then the "
#~ "selection of the area to be painted<BR>will be initiated by a first click "
#~ "and finished by the second mouse click.<BR>If <B>All</B>  is selected "
#~ "then the Paint will start after click.<BR>If <B>Ref</B>  is selected then "
#~ "the Paint will start after click,<BR>and the painted area will be "
#~ "described by a selected object.<BR>A new Geometry object with the tool "
#~ "paths will be created."

#~ msgid "<b>Apertures:</b>"
#~ msgstr "<b>Apertures:</b>"

#~ msgid "Aperture Code:"
#~ msgstr "Aperture Code:"

#~ msgid "<b>Languages:</b>"
#~ msgstr "<b>Languages:</b>"

#~ msgid "Width (# passes):"
#~ msgstr "Width (# passes):"

#~| msgid "<b>Clear non-copper:</b>"
#~ msgid "Clear non-copper"
#~ msgstr "Clear non-copper"

#~ msgid "Rounded corners"
#~ msgstr "Rounded corners"

#~ msgid ""
#~ "Creates a Geometry objects with polygons\n"
#~ "covering the copper-free areas of the PCB."
#~ msgstr ""
#~ "Creates a Geometry objects with polygons\n"
#~ "covering the copper-free areas of the PCB."

#~ msgid "<b>Bounding Box:</b>"
#~ msgstr "<b>Bounding Box:</b>"

#~ msgid "<b>Units</b>:"
#~ msgstr "<b>Units</b>:"

#~ msgid "<b>Zeros</b>:"
#~ msgstr "<b>Zeros</b>:"

#~ msgid "INCH:"
#~ msgstr "INCH:"

#~ msgid "Tool change:"
#~ msgstr "Tool change:"

#~ msgid "Toolchange Z position."
#~ msgstr "Toolchange Z position."

#~ msgid "Feedrate:"
#~ msgstr "Feedrate:"

#~ msgid ""
#~ "Tool speed while drilling\n"
#~ "(in units per minute)."
#~ msgstr ""
#~ "Tool speed while drilling\n"
#~ "(in units per minute)."

#~ msgid "<b>Gcode:    </b>"
#~ msgstr "<b>Gcode:    </b>"

#~ msgid "Offset Z:"
#~ msgstr "Offset Z:"

#~ msgid "<b>Slots:</b>"
#~ msgstr "<b>Slots:</b>"

#~ msgid "<b>Create CNC Job:</b>"
#~ msgstr "<b>Create CNC Job:</b>"

#~ msgid "Multidepth"
#~ msgstr "Multidepth"

#~ msgid "Multidepth usage: True or False."
#~ msgstr "Multidepth usage: True or False."

#~ msgid ""
#~ "The postprocessor file that dictates\n"
#~ "Machine Code output."
#~ msgstr ""
#~ "The postprocessor file that dictates\n"
#~ "Machine Code output."

#~ msgid "Display Annotation:"
#~ msgstr "Display Annotation:"

#~ msgid ""
#~ "Type here any G-Code commands you would\n"
#~ "like to be executed when Toolchange event is encountered.\n"
#~ "This will constitute a Custom Toolchange GCode,\n"
#~ "or a Toolchange Macro."
#~ msgstr ""
#~ "Type here any G-Code commands you would\n"
#~ "like to be executed when Toolchange event is encountered.\n"
#~ "This will constitute a Custom Toolchange GCode,\n"
#~ "or a Toolchange Macro."

#~ msgid ""
#~ "If checked, use 'rest machining'.\n"
#~ "Basically it will clear copper outside PCB features,\n"
#~ "using the biggest tool and continue with the next tools,\n"
#~ "from bigger to smaller, to clear areas of copper that\n"
#~ "could not be cleared by previous tool.\n"
#~ "If not checked, use the standard algorithm."
#~ msgstr ""
#~ "If checked, use 'rest machining'.\n"
#~ "Basically it will clear copper outside PCB features,\n"
#~ "using the biggest tool and continue with the next tools,\n"
#~ "from bigger to smaller, to clear areas of copper that\n"
#~ "could not be cleared by previous tool.\n"
#~ "If not checked, use the standard algorithm."

#~ msgid "Offset:"
#~ msgstr "Offset:"

#~ msgid ""
#~ "Distance from objects at which\n"
#~ "to draw the cutout."
#~ msgstr ""
#~ "Distance from objects at which\n"
#~ "to draw the cutout."

#~ msgid ""
#~ "Size of the gaps in the toolpath\n"
#~ "that will remain to hold the\n"
#~ "board in place."
#~ msgstr ""
#~ "Size of the gaps in the toolpath\n"
#~ "that will remain to hold the\n"
#~ "board in place."

#~ msgid "Create a convex shape surrounding the entire PCB."
#~ msgstr "Create a convex shape surrounding the entire PCB."

#~ msgid ""
#~ "The axis should pass through a <b>point</b> or cut\n"
#~ " a specified <b>box</b> (in a Geometry object) in \n"
#~ "the middle."
#~ msgstr ""
#~ "The axis should pass through a <b>point</b> or cut\n"
#~ " a specified <b>box</b> (in a Geometry object) in \n"
#~ "the middle."

#~ msgid ""
#~ "How much (fraction) of the tool\n"
#~ "width to overlap each tool pass."
#~ msgstr ""
#~ "How much (fraction) of the tool\n"
#~ "width to overlap each tool pass."

#~ msgid "Panel Type:"
#~ msgstr "Panel Type:"

#~ msgid "Tip angle:"
#~ msgstr "Tip angle:"

#~ msgid "Angle for rotation. In degrees."
#~ msgstr "Angle for rotation. In degrees."

#~ msgid "Angle for Skew/Shear on X axis. In degrees."
#~ msgstr "Angle for Skew/Shear on X axis. In degrees."

#~ msgid "Angle for Skew/Shear on Y axis. In degrees."
#~ msgstr "Angle for Skew/Shear on Y axis. In degrees."

#~ msgid "XY Toolchange:"
#~ msgstr "XY Toolchange:"

#~ msgid "PostProcessors:"
#~ msgstr "PostProcessors:"

#~ msgid "<b>Scale:</b>"
#~ msgstr "<b>Scale:</b>"

#~ msgid "<b>Offset:</b>"
#~ msgstr "<b>Offset:</b>"

#~ msgid "Combine"
#~ msgstr "Combine"

#~ msgid "<b>Tools Table</b>"
#~ msgstr "<b>Tools Table</b>"

#~ msgid ""
#~ "Tool height just before starting the work.\n"
#~ "Delete the value if you don't need this feature."
#~ msgstr ""
#~ "Tool height just before starting the work.\n"
#~ "Delete the value if you don't need this feature."

#~ msgid ""
#~ "Z-axis position (height) for\n"
#~ "the last move."
#~ msgstr ""
#~ "Z-axis position (height) for\n"
#~ "the last move."

#~ msgid ""
#~ "The json file that dictates\n"
#~ "gcode output."
#~ msgstr ""
#~ "The json file that dictates\n"
#~ "gcode output."

#~ msgid "<b>Type:    </b>"
#~ msgstr "<b>Type:    </b>"

#~ msgid "Drills Tool dia:"
#~ msgstr "Drills Tool dia:"

#~ msgid "Slots Tool dia:"
#~ msgstr "Slots Tool dia:"

#~ msgid "<b>Tool Dia:</b>"
#~ msgstr "<b>Tool Dia:</b>"

#~ msgid "<b>Tool Data</b>"
#~ msgstr "<b>Tool Data</b>"

#~ msgid ""
#~ "This is the height (Z) at which the CNC\n"
#~ "will go as the last move."
#~ msgstr ""
#~ "This is the height (Z) at which the CNC\n"
#~ "will go as the last move."

#~ msgid "Feed Rate Z (Plunge):"
#~ msgstr "Feed Rate Z (Plunge):"

#~ msgid ""
#~ "Cutting speed in the Z\n"
#~ "plane in units per minute"
#~ msgstr ""
#~ "Cutting speed in the Z\n"
#~ "plane in units per minute"

#~ msgid ""
#~ "Cutting speed in the XY\n"
#~ "plane in units per minute\n"
#~ "(in units per minute).\n"
#~ "This is for the rapid move G00.\n"
#~ "It is useful only for Marlin,\n"
#~ "ignore for any other cases."
#~ msgstr ""
#~ "Cutting speed in the XY\n"
#~ "plane in units per minute\n"
#~ "(in units per minute).\n"
#~ "This is for the rapid move G00.\n"
#~ "It is useful only for Marlin,\n"
#~ "ignore for any other cases."

#~ msgid "Cut over 1st pt"
#~ msgstr "Cut over 1st pt"

#~ msgid "<b>Paint Area:</b>"
#~ msgstr "<b>Paint Area:</b>"

#~ msgid "<b>CNC Tools Table</b>"
#~ msgstr "<b>CNC Tools Table</b>"

#~ msgid ""
#~ "Type here any G-Code commands you would\n"
#~ "like to add to the beginning of the generated file."
#~ msgstr ""
#~ "Type here any G-Code commands you would\n"
#~ "like to add to the beginning of the generated file."

#~ msgid ""
#~ "This is the diameter of the tool tip.\n"
#~ "The manufacturer specifies it."
#~ msgstr ""
#~ "This is the diameter of the tool tip.\n"
#~ "The manufacturer specifies it."

#~ msgid "Object:"
#~ msgstr "Object:"

#~ msgid "Units:"
#~ msgstr "Units:"

#~ msgid ""
#~ "- 'Itself': the non copper clearing extent\n"
#~ "is based on the object that is copper cleared.\n"
#~ " - 'Box': will do non copper clearing within the box\n"
#~ "specified by the object selected in the Ref. Object combobox."
#~ msgstr ""
#~ "- 'Itself': the non copper clearing extent\n"
#~ "is based on the object that is copper cleared.\n"
#~ " - 'Box': will do non copper clearing within the box\n"
#~ "specified by the object selected in the Ref. Object combobox."

#~ msgid "Geometry:"
#~ msgstr "Geometry:"

#~ msgid ""
#~ "Scale the selected object(s)\n"
#~ "using the Scale Factor X for both axis."
#~ msgstr ""
#~ "Scale the selected object(s)\n"
#~ "using the Scale Factor X for both axis."

#~ msgid "<b>Excellon Format:</b>"
#~ msgstr "<b>Excellon Format:</b>"

#~ msgid "<b>Tools:</b>"
#~ msgstr "<b>Tools:</b>"

#~ msgid "<b>Export G-Code:</b>"
#~ msgstr "<b>Export G-Code:</b>"

#~ msgid "How to select the polygons to paint."
#~ msgstr "How to select the polygons to paint."

#~ msgid "<b>V-Shape Tool Calculator:</b>"
#~ msgstr "<b>V-Shape Tool Calculator:</b>"

#~ msgid "<b>ElectroPlating Calculator:</b>"
#~ msgstr "<b>ElectroPlating Calculator:</b>"

#~ msgid "<b>Name:</b>"
#~ msgstr "<b>Name:</b>"

#~ msgid "<b>Plot kind:</b>"
#~ msgstr "<b>Plot kind:</b>"

#~ msgid "<b>Display Annotation:</b>"
#~ msgstr "<b>Display Annotation:</b>"

#~ msgid "<b>GERBER:</b>"
#~ msgstr "<b>GERBER:</b>"

#~ msgid "<b>EXCELLON:</b>"
#~ msgstr "<b>EXCELLON:</b>"

#~ msgid "<b>GEOMETRY</b>:"
#~ msgstr "<b>GEOMETRY</b>:"

#~ msgid "<b>Panel Type:</b>"
#~ msgstr "<b>Panel Type:</b>"

#~ msgid "<b>Excellon format:</b>"
#~ msgstr "<b>Excellon format:</b>"

#~ msgid "<b>Gerber Objects</b>"
#~ msgstr "<b>Gerber Objects</b>"

#~ msgid "<b>Geometry Objects</b>"
#~ msgstr "<b>Geometry Objects</b>"

#~ msgid "Save &Defaults"
#~ msgstr "Save &Defaults"

#~ msgid "Line"
#~ msgstr "Line"

#~ msgid "Tool dia:                   "
#~ msgstr "Tool dia:                   "

#~ msgid ""
#~ "The diameter of the cutting\n"
#~ "tool.."
#~ msgstr ""
#~ "The diameter of the cutting\n"
#~ "tool.."

#~ msgid "Disable"
#~ msgstr "Disable"

#~ msgid "[WARNING_NOTCL] Move cancelled. No shape selected."
#~ msgstr "[WARNING_NOTCL] Move cancelled. No shape selected."

#~ msgid "Click on the Destination point..."
#~ msgstr "Click on the Destination point..."

#~ msgid "Copy as &Geom"
#~ msgstr "Copy as &Geom"

#~ msgid "Ap. Scale Factor:"
#~ msgstr "Ap. Scale Factor:"

#~ msgid ""
#~ "Change the size of the selected apertures.\n"
#~ "Factor by which to multiply\n"
#~ "geometric features of this object."
#~ msgstr ""
#~ "Change the size of the selected apertures.\n"
#~ "Factor by which to multiply\n"
#~ "geometric features of this object."

#~ msgid "Ap. Buffer Factor:"
#~ msgstr "Ap. Buffer Factor:"

#~ msgid ""
#~ "Change the size of the selected apertures.\n"
#~ "Factor by which to expand/shrink\n"
#~ "geometric features of this object."
#~ msgstr ""
#~ "Change the size of the selected apertures.\n"
#~ "Factor by which to expand/shrink\n"
#~ "geometric features of this object."

#~ msgid "In"
#~ msgstr "In"

#~ msgid "Out"
#~ msgstr "Out"

#~ msgid "Custom"
#~ msgstr "Custom"

#~ msgid "Both"
#~ msgstr "Both"

#~ msgid "Pos"
#~ msgstr "Pos"

#~ msgid "Neg"
#~ msgstr "Neg"

#~ msgid "Solid   "
#~ msgstr "Solid   "

#~ msgid "M-Color   "
#~ msgstr "M-Color   "

#~ msgid "Click on CENTER ..."
#~ msgstr "Click on CENTER ..."

#~ msgid "[success] Done. Region completed."
#~ msgstr "[success] Done. Region completed."

#~ msgid "Del Aperture:"
#~ msgstr "Del Aperture:"

#~ msgid ""
#~ "Delete a aperture in the aperture list.\n"
#~ "It will delete also the associated geometry."
#~ msgstr ""
#~ "Delete a aperture in the aperture list.\n"
#~ "It will delete also the associated geometry."

#~ msgid "Save && Close Edit"
#~ msgstr "Save && Close Edit"

#~ msgid ""
#~ "<b>Editor Shortcut list</b><br>\n"
#~ "            <br>\n"
#~ "            <strong><span style=\"color:#0000ff\">GEOMETRY EDITOR</span></"
#~ "strong><br>\n"
#~ "    \n"
#~ "            <table border=\"0\" cellpadding=\"0\" cellspacing=\"0\" style="
#~ "\"width:283px\">\n"
#~ "                <tbody>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\" width=\"89\"><strong>A</"
#~ "strong></td>\n"
#~ "                        <td width=\"194\">&nbsp;Draw an Arc</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>B</strong></td>\n"
#~ "                        <td>&nbsp;Buffer Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>C</strong></td>\n"
#~ "                        <td>&nbsp;Copy Geo Item</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>E</strong></td>\n"
#~ "                        <td>&nbsp;Polygon Intersection Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>I</strong></td>\n"
#~ "                        <td>&nbsp;Paint Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>J</strong></td>\n"
#~ "                        <td>&nbsp;Jump to Location (x, y)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>K</strong></td>\n"
#~ "                        <td>&nbsp;Toggle Corner Snap</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>M</strong></td>\n"
#~ "                        <td>&nbsp;Move Geo Item</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>N</strong></td>\n"
#~ "                        <td>&nbsp;Draw a Polygon</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>O</strong></td>\n"
#~ "                        <td>&nbsp;Draw a Circle</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>P</strong></td>\n"
#~ "                        <td>&nbsp;Draw a Path</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>R</strong></td>\n"
#~ "                        <td>&nbsp;Draw Rectangle</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>S</strong></td>\n"
#~ "                        <td>&nbsp;Polygon Substraction Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>T</strong></td>\n"
#~ "                        <td>&nbsp;Add Text Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>U</strong></td>\n"
#~ "                        <td>&nbsp;Polygon Union Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>X</strong></td>\n"
#~ "                        <td>&nbsp;Flip shape on X axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Y</strong></td>\n"
#~ "                        <td>&nbsp;Flip shape on Y axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>SHIFT+X</strong></td>\n"
#~ "                        <td>&nbsp;Skew shape on X axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>SHIFT+Y</strong></td>\n"
#~ "                        <td>&nbsp;Skew shape on Y axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+R</strong></td>\n"
#~ "                        <td>&nbsp;Editor Transformation Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+X</strong></td>\n"
#~ "                        <td>&nbsp;Offset shape on X axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+Y</strong></td>\n"
#~ "                        <td>&nbsp;Offset shape on Y axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>CTRL+M</strong></td>\n"
#~ "                        <td>&nbsp;Measurement Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>CTRL+S</strong></td>\n"
#~ "                        <td>&nbsp;Save Object and Exit Editor</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>CTRL+X</strong></td>\n"
#~ "                        <td>&nbsp;Polygon Cut Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Space</strong></td>\n"
#~ "                        <td>&nbsp;Rotate Geometry</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ENTER</strong></td>\n"
#~ "                        <td>&nbsp;Finish drawing for certain tools</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ESC</strong></td>\n"
#~ "                        <td>&nbsp;Abort and return to Select</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Del</strong></td>\n"
#~ "                        <td>&nbsp;Delete Shape</td>\n"
#~ "                    </tr>\n"
#~ "                </tbody>\n"
#~ "            </table>\n"
#~ "            <br>\n"
#~ "            <br>\n"
#~ "            <strong><span style=\"color:#ff0000\">EXCELLON EDITOR</span></"
#~ "strong><br>\n"
#~ "            <table border=\"0\" cellpadding=\"0\" cellspacing=\"0\" style="
#~ "\"width:283px\">\n"
#~ "                <tbody>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\" width=\"89\"><strong>A</"
#~ "strong></td>\n"
#~ "                        <td width=\"194\">&nbsp;Add Drill Array</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>C</strong></td>\n"
#~ "                        <td>&nbsp;Copy Drill(s)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>D</strong></td>\n"
#~ "                        <td>&nbsp;Add Drill</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>J</strong></td>\n"
#~ "                        <td>&nbsp;Jump to Location (x, y)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>M</strong></td>\n"
#~ "                        <td>&nbsp;Move Drill(s)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>R</strong></td>\n"
#~ "                        <td>&nbsp;Resize Drill(s)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>T</strong></td>\n"
#~ "                        <td>&nbsp;Add a new Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Del</strong></td>\n"
#~ "                        <td>&nbsp;Delete Drill(s)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Del</strong></td>\n"
#~ "                        <td>&nbsp;Alternate: Delete Tool(s)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ESC</strong></td>\n"
#~ "                        <td>&nbsp;Abort and return to Select</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>CTRL+S</strong></td>\n"
#~ "                        <td>&nbsp;Save Object and Exit Editor</td>\n"
#~ "                    </tr>\n"
#~ "                </tbody>\n"
#~ "            </table>\n"
#~ "                    "
#~ msgstr ""
#~ "<b>Editor Shortcut list</b><br>\n"
#~ "            <br>\n"
#~ "            <strong><span style=\"color:#0000ff\">GEOMETRY EDITOR</span></"
#~ "strong><br>\n"
#~ "    \n"
#~ "            <table border=\"0\" cellpadding=\"0\" cellspacing=\"0\" style="
#~ "\"width:283px\">\n"
#~ "                <tbody>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\" width=\"89\"><strong>A</"
#~ "strong></td>\n"
#~ "                        <td width=\"194\">&nbsp;Draw an Arc</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>B</strong></td>\n"
#~ "                        <td>&nbsp;Buffer Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>C</strong></td>\n"
#~ "                        <td>&nbsp;Copy Geo Item</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>E</strong></td>\n"
#~ "                        <td>&nbsp;Polygon Intersection Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>I</strong></td>\n"
#~ "                        <td>&nbsp;Paint Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>J</strong></td>\n"
#~ "                        <td>&nbsp;Jump to Location (x, y)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>K</strong></td>\n"
#~ "                        <td>&nbsp;Toggle Corner Snap</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>M</strong></td>\n"
#~ "                        <td>&nbsp;Move Geo Item</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>N</strong></td>\n"
#~ "                        <td>&nbsp;Draw a Polygon</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>O</strong></td>\n"
#~ "                        <td>&nbsp;Draw a Circle</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>P</strong></td>\n"
#~ "                        <td>&nbsp;Draw a Path</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>R</strong></td>\n"
#~ "                        <td>&nbsp;Draw Rectangle</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>S</strong></td>\n"
#~ "                        <td>&nbsp;Polygon Substraction Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>T</strong></td>\n"
#~ "                        <td>&nbsp;Add Text Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>U</strong></td>\n"
#~ "                        <td>&nbsp;Polygon Union Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>X</strong></td>\n"
#~ "                        <td>&nbsp;Flip shape on X axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Y</strong></td>\n"
#~ "                        <td>&nbsp;Flip shape on Y axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>SHIFT+X</strong></td>\n"
#~ "                        <td>&nbsp;Skew shape on X axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>SHIFT+Y</strong></td>\n"
#~ "                        <td>&nbsp;Skew shape on Y axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+R</strong></td>\n"
#~ "                        <td>&nbsp;Editor Transformation Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+X</strong></td>\n"
#~ "                        <td>&nbsp;Offset shape on X axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ALT+Y</strong></td>\n"
#~ "                        <td>&nbsp;Offset shape on Y axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>CTRL+M</strong></td>\n"
#~ "                        <td>&nbsp;Measurement Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>CTRL+S</strong></td>\n"
#~ "                        <td>&nbsp;Save Object and Exit Editor</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>CTRL+X</strong></td>\n"
#~ "                        <td>&nbsp;Polygon Cut Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Space</strong></td>\n"
#~ "                        <td>&nbsp;Rotate Geometry</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ENTER</strong></td>\n"
#~ "                        <td>&nbsp;Finish drawing for certain tools</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ESC</strong></td>\n"
#~ "                        <td>&nbsp;Abort and return to Select</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Del</strong></td>\n"
#~ "                        <td>&nbsp;Delete Shape</td>\n"
#~ "                    </tr>\n"
#~ "                </tbody>\n"
#~ "            </table>\n"
#~ "            <br>\n"
#~ "            <br>\n"
#~ "            <strong><span style=\"color:#ff0000\">EXCELLON EDITOR</span></"
#~ "strong><br>\n"
#~ "            <table border=\"0\" cellpadding=\"0\" cellspacing=\"0\" style="
#~ "\"width:283px\">\n"
#~ "                <tbody>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\" width=\"89\"><strong>A</"
#~ "strong></td>\n"
#~ "                        <td width=\"194\">&nbsp;Add Drill Array</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>C</strong></td>\n"
#~ "                        <td>&nbsp;Copy Drill(s)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>D</strong></td>\n"
#~ "                        <td>&nbsp;Add Drill</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>J</strong></td>\n"
#~ "                        <td>&nbsp;Jump to Location (x, y)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>M</strong></td>\n"
#~ "                        <td>&nbsp;Move Drill(s)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>R</strong></td>\n"
#~ "                        <td>&nbsp;Resize Drill(s)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>T</strong></td>\n"
#~ "                        <td>&nbsp;Add a new Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Del</strong></td>\n"
#~ "                        <td>&nbsp;Delete Drill(s)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Del</strong></td>\n"
#~ "                        <td>&nbsp;Alternate: Delete Tool(s)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ESC</strong></td>\n"
#~ "                        <td>&nbsp;Abort and return to Select</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>CTRL+S</strong></td>\n"
#~ "                        <td>&nbsp;Save Object and Exit Editor</td>\n"
#~ "                    </tr>\n"
#~ "                </tbody>\n"
#~ "            </table>\n"
#~ "                    "

#~ msgid "[ERROR_NOTCL]Could not load defaults file."
#~ msgstr "[ERROR_NOTCL]Could not load defaults file."

#~ msgid ""
#~ "[ERROR_NOTCL] The aperture scale factor value is missing or wrong format."
#~ msgstr ""
#~ "[ERROR_NOTCL] The aperture scale factor value is missing or wrong format."

#~ msgid "[WARNING_NOTCL]Export Machine Code cancelled ..."
#~ msgstr "[WARNING_NOTCL]Export Machine Code cancelled ..."

#~ msgid "[success] GUI settings deleted ..."
#~ msgstr "[success] GUI settings deleted ..."

#~ msgid "Scale Factor:"
#~ msgstr "Scale Factor:"

#~ msgid "Buffer Factor:"
#~ msgstr "Buffer Factor:"

#~ msgid "<b>Generate new Gerber Object:</b>"
#~ msgstr "<b>Generate new Gerber Object:</b>"

#~ msgid "Will generate a new Gerber object from the changed apertures."
#~ msgstr "Will generate a new Gerber object from the changed apertures."

#~ msgid ""
#~ "Will generate a new Gerber object from the changed apertures.\n"
#~ "This new object can then be isolated etc."
#~ msgstr ""
#~ "Will generate a new Gerber object from the changed apertures.\n"
#~ "This new object can then be isolated etc."

#~ msgid "[success]Offset on the %s axis done ..."
#~ msgstr "[success]Offset on the %s axis done ..."

#~ msgid ""
#~ "How much (fraction) of the tool width to overlap each tool pass.\n"
#~ "Example:\n"
#~ "A value here of 0.25 means 25\\% from the tool diameter found above.\n"
#~ "\n"
#~ "Adjust the value starting with lower values\n"
#~ "and increasing it if areas that should be painted are still \n"
#~ "not painted.\n"
#~ "Lower values = faster processing, faster execution on PCB.\n"
#~ "Higher values = slow processing and slow execution on CNC\n"
#~ "due of too many paths."
#~ msgstr ""
#~ "How much (fraction) of the tool width to overlap each tool pass.\n"
#~ "Example:\n"
#~ "A value here of 0.25 means 25\\% from the tool diameter found above.\n"
#~ "\n"
#~ "Adjust the value starting with lower values\n"
#~ "and increasing it if areas that should be painted are still \n"
#~ "not painted.\n"
#~ "Lower values = faster processing, faster execution on PCB.\n"
#~ "Higher values = slow processing and slow execution on CNC\n"
#~ "due of too many paths."

#~| msgid "z_toolchange = Z coord for Toolchange"
#~ msgid "z_cut = Z coord for Toolchange"
#~ msgstr "z_cut = Z coord for Toolchange"

#~| msgid "z_toolchange = Z coord for Toolchange"
#~ msgid "z_move = Z coord for Toolchange"
#~ msgstr "z_move = Z coord for Toolchange"

#~ msgid "%s/Project_%s"
#~ msgstr "%s/Project_%s"

#~ msgid "tool_tab"
#~ msgstr "tool_tab"