FlatCAM/locale/en/LC_MESSAGES/strings.po

# SOME DESCRIPTIVE TITLE.
# Copyright (C) YEAR ORGANIZATION
# FIRST AUTHOR <EMAIL@ADDRESS>, YEAR.
#
msgid ""
msgstr ""
"Project-Id-Version: \n"
"POT-Creation-Date: 2020-11-03 16:54+0200\n"
"PO-Revision-Date: 2020-11-03 16:54+0200\n"
"Last-Translator: \n"
"Language-Team: \n"
"Language: en\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Generated-By: pygettext.py 1.5\n"
"X-Generator: Poedit 2.4.1\n"
"Plural-Forms: nplurals=2; plural=(n != 1);\n"
"X-Poedit-Basepath: ../../..\n"
"X-Poedit-SearchPath-0: .\n"
"X-Poedit-SearchPathExcluded-0: build\n"
"X-Poedit-SearchPathExcluded-1: doc\n"
"X-Poedit-SearchPathExcluded-2: tests\n"

#: Bookmark.py:57 Bookmark.py:84
msgid "Title"
msgstr "Title"

#: Bookmark.py:58 Bookmark.py:88
msgid "Web Link"
msgstr "Web Link"

#: Bookmark.py:62
msgid ""
"Index.\n"
"The rows in gray color will populate the Bookmarks menu.\n"
"The number of gray colored rows is set in Preferences."
msgstr ""
"Index.\n"
"The rows in gray color will populate the Bookmarks menu.\n"
"The number of gray colored rows is set in Preferences."

#: Bookmark.py:66
msgid ""
"Description of the link that is set as an menu action.\n"
"Try to keep it short because it is installed as a menu item."
msgstr ""
"Description of the link that is set as an menu action.\n"
"Try to keep it short because it is installed as a menu item."

#: Bookmark.py:69
msgid "Web Link. E.g: https://your_website.org "
msgstr "Web Link. E.g: https://your_website.org "

#: Bookmark.py:78
msgid "New Bookmark"
msgstr "New Bookmark"

#: Bookmark.py:97
msgid "Add Entry"
msgstr "Add Entry"

#: Bookmark.py:98
msgid "Remove Entry"
msgstr "Remove Entry"

#: Bookmark.py:99
msgid "Export List"
msgstr "Export List"

#: Bookmark.py:100
msgid "Import List"
msgstr "Import List"

#: Bookmark.py:190
msgid "Title entry is empty."
msgstr "Title entry is empty."

#: Bookmark.py:199
msgid "Web link entry is empty."
msgstr "Web link entry is empty."

#: Bookmark.py:207
msgid "Either the Title or the Weblink already in the table."
msgstr "Either the Title or the Weblink already in the table."

#: Bookmark.py:227
msgid "Bookmark added."
msgstr "Bookmark added."

#: Bookmark.py:243 app_Main.py:3407 app_Main.py:3449
msgid "Backup Site"
msgstr "Backup Site"

#: Bookmark.py:244
msgid "This bookmark can not be removed"
msgstr "This bookmark can not be removed"

#: Bookmark.py:275
msgid "Bookmark removed."
msgstr "Bookmark removed."

#: Bookmark.py:291
msgid "Export Bookmarks"
msgstr "Export Bookmarks"

#: Bookmark.py:293 appGUI/MainGUI.py:591
msgid "Bookmarks"
msgstr "Bookmarks"

#: Bookmark.py:300 Bookmark.py:342 appDatabase.py:2111 appDatabase.py:2157
#: appEditors/AppExcEditor.py:1203 appEditors/AppExcEditor.py:1271
#: appEditors/AppTextEditor.py:259 appGUI/MainGUI.py:3015
#: appGUI/MainGUI.py:3237 appGUI/MainGUI.py:3452
#: appObjects/FlatCAMCNCJob.py:1757 appObjects/ObjectCollection.py:126
#: appTools/ToolCorners.py:332 appTools/ToolFilm.py:242
#: appTools/ToolFilm.py:390 appTools/ToolImage.py:111 appTools/ToolMove.py:269
#: appTools/ToolPcbWizard.py:189 appTools/ToolPcbWizard.py:212
#: appTools/ToolQRCode.py:531 appTools/ToolQRCode.py:580 app_Main.py:1785
#: app_Main.py:2801 app_Main.py:4534 app_Main.py:8323 app_Main.py:8362
#: app_Main.py:8406 app_Main.py:8432 app_Main.py:8472 app_Main.py:8497
#: app_Main.py:8553 app_Main.py:8591 app_Main.py:8637 app_Main.py:8679
#: app_Main.py:8721 app_Main.py:8762 app_Main.py:8804 app_Main.py:8849
#: app_Main.py:8910 app_Main.py:8942 app_Main.py:8972 app_Main.py:9147
#: app_Main.py:9184 app_Main.py:9227 app_Main.py:9301 app_Main.py:9357
#: app_Main.py:9624 app_Main.py:9659
msgid "Cancelled."
msgstr "Cancelled."

#: Bookmark.py:308 appDatabase.py:2119 appEditors/AppTextEditor.py:314
#: appObjects/FlatCAMCNCJob.py:1679 appObjects/FlatCAMCNCJob.py:1871
#: appObjects/FlatCAMCNCJob.py:2333 appTools/ToolFilm.py:589
#: appTools/ToolFilm.py:839 appTools/ToolSolderPaste.py:1098 app_Main.py:2809
#: app_Main.py:9594 app_Main.py:9802 app_Main.py:9937 app_Main.py:10003
#: app_Main.py:10757
msgid ""
"Permission denied, saving not possible.\n"
"Most likely another app is holding the file open and not accessible."
msgstr ""
"Permission denied, saving not possible.\n"
"Most likely another app is holding the file open and not accessible."

#: Bookmark.py:319 Bookmark.py:349
msgid "Could not load bookmarks file."
msgstr "Could not load bookmarks file."

#: Bookmark.py:329
msgid "Failed to write bookmarks to file."
msgstr "Failed to write bookmarks to file."

#: Bookmark.py:331
msgid "Exported bookmarks to"
msgstr "Exported bookmarks to"

#: Bookmark.py:337
msgid "Import Bookmarks"
msgstr "Import Bookmarks"

#: Bookmark.py:356
msgid "Imported Bookmarks from"
msgstr "Imported Bookmarks from"

#: appCommon/Common.py:46
msgid "The user requested a graceful exit of the current task."
msgstr "The user requested a graceful exit of the current task."

#: appCommon/Common.py:293 appTools/ToolCopperThieving.py:347
#: appTools/ToolIsolation.py:1532 appTools/ToolNCC.py:1469
msgid "Click the start point of the area."
msgstr "Click the start point of the area."

#: appCommon/Common.py:352 appTools/ToolNCC.py:1528 appTools/ToolPaint.py:1219
msgid "Click the end point of the area."
msgstr "Click the end point of the area."

#: appCommon/Common.py:358 appCommon/Common.py:460
#: appTools/ToolCopperThieving.py:391 appTools/ToolIsolation.py:2446
#: appTools/ToolIsolation.py:2498 appTools/ToolNCC.py:1534
#: appTools/ToolNCC.py:1586 appTools/ToolPaint.py:1225
#: appTools/ToolPaint.py:1276
msgid "Zone added. Click to start adding next zone or right click to finish."
msgstr "Zone added. Click to start adding next zone or right click to finish."

#: appCommon/Common.py:405 appEditors/AppGeoEditor.py:2362
#: appTools/ToolIsolation.py:2469 appTools/ToolNCC.py:1557
#: appTools/ToolPaint.py:1247
msgid "Click on next Point or click right mouse button to complete ..."
msgstr "Click on next Point or click right mouse button to complete ..."

#: appCommon/Common.py:491
msgid "Exclusion areas added. Checking overlap with the object geometry ..."
msgstr "Exclusion areas added. Checking overlap with the object geometry ..."

#: appCommon/Common.py:497
msgid "Failed. Exclusion areas intersects the object geometry ..."
msgstr "Failed. Exclusion areas intersects the object geometry ..."

#: appCommon/Common.py:500
msgid "Exclusion areas added."
msgstr "Exclusion areas added."

#: appCommon/Common.py:509 appCommon/Common.py:642 appCommon/Common.py:704
msgid "Generate the CNC Job object."
msgstr "Generate the CNC Job object."

#: appCommon/Common.py:509
msgid "With Exclusion areas."
msgstr "With Exclusion areas."

#: appCommon/Common.py:544
msgid "Cancelled. Area exclusion drawing was interrupted."
msgstr "Cancelled. Area exclusion drawing was interrupted."

#: appCommon/Common.py:652 appCommon/Common.py:707
msgid "All exclusion zones deleted."
msgstr "All exclusion zones deleted."

#: appCommon/Common.py:693
msgid "Selected exclusion zones deleted."
msgstr "Selected exclusion zones deleted."

#: appDatabase.py:44
msgid "ID"
msgstr "ID"

#: appDatabase.py:44
msgid "Tool Name"
msgstr "Tool Name"

#: appDatabase.py:82
msgid "Tool Description"
msgstr "Tool Description"

#: appDatabase.py:95
msgid "Milling Parameters"
msgstr "Milling Parameters"

#: appDatabase.py:108
msgid "NCC Parameters"
msgstr "NCC Parameters"

#: appDatabase.py:121
msgid "Paint Parameters"
msgstr "Paint Parameters"

#: appDatabase.py:134
msgid "Isolation Parameters"
msgstr "Isolation Parameters"

#: appDatabase.py:147
msgid "Drilling Parameters"
msgstr "Drilling Parameters"

#: appDatabase.py:160
msgid "Cutout Parameters"
msgstr "Cutout Parameters"

#: appDatabase.py:210 appEditors/AppGeoEditor.py:3297 appGUI/ObjectUI.py:219
#: appGUI/ObjectUI.py:570 appGUI/ObjectUI.py:894 appGUI/ObjectUI.py:1901
#: appGUI/ObjectUI.py:2718 appGUI/ObjectUI.py:2785
#: appTools/ToolCalibration.py:929 appTools/ToolFiducials.py:710
#: app_Main.py:7559
msgid "Name"
msgstr "Name"

#: appDatabase.py:212
msgid ""
"Tool name.\n"
"This is not used in the app, it's function\n"
"is to serve as a note for the user."
msgstr ""
"Tool name.\n"
"This is not used in the app, it's function\n"
"is to serve as a note for the user."

#: appDatabase.py:223 appEditors/AppExcEditor.py:2573
#: appEditors/AppExcEditor.py:3735 appGUI/ObjectUI.py:666
#: appObjects/FlatCAMExcellon.py:905 appObjects/FlatCAMExcellon.py:1005
#: appObjects/FlatCAMObj.py:719 appObjects/FlatCAMObj.py:782
#: appTools/ToolDrilling.py:1762 appTools/ToolDrilling.py:1827
#: appTools/ToolDrilling.py:2065 appTools/ToolIsolation.py:3127
#: appTools/ToolMilling.py:1071 appTools/ToolMilling.py:1175
#: appTools/ToolMilling.py:1360 appTools/ToolMilling.py:1670
#: appTools/ToolNCC.py:3998 appTools/ToolPaint.py:2831
#: appTools/ToolPcbWizard.py:404 appTools/ToolProperties.py:413
#: appTools/ToolProperties.py:476 appTools/ToolSolderPaste.py:1167
#: tclCommands/TclCommandDrillcncjob.py:195
msgid "Diameter"
msgstr "Diameter"

#: appDatabase.py:225
msgid "Tool Diameter."
msgstr "Tool Diameter."

#: appDatabase.py:236
msgid "Diameter Tolerance"
msgstr "Diameter Tolerance"

#: appDatabase.py:238
msgid ""
"Tool tolerance. This tool will be used if the desired tool diameter\n"
"is within the tolerance specified here."
msgstr ""
"Tool tolerance. This tool will be used if the desired tool diameter\n"
"is within the tolerance specified here."

#: appDatabase.py:244
msgid "Min"
msgstr "Min"

#: appDatabase.py:246
msgid "Set the tool tolerance minimum."
msgstr "Set the tool tolerance minimum."

#: appDatabase.py:258
msgid "Max"
msgstr "Max"

#: appDatabase.py:260
msgid "Set the tool tolerance maximum."
msgstr "Set the tool tolerance maximum."

#: appDatabase.py:272 appDatabase.py:590
#: appGUI/preferences/excellon/ExcellonOptPrefGroupUI.py:46
#: appTools/ToolMilling.py:1738 appTools/ToolNCC.py:4163
msgid "Operation"
msgstr "Operation"

#: appDatabase.py:274
msgid "The kind of Application Tool where this tool is to be used."
msgstr "The kind of Application Tool where this tool is to be used."

#: appDatabase.py:278 appDatabase.py:1786 appDatabase.py:2192
#: appGUI/MainGUI.py:1414 app_Main.py:7557
msgid "General"
msgstr "General"

#: appDatabase.py:278 appDatabase.py:2195
#: appGUI/preferences/excellon/ExcellonOptPrefGroupUI.py:55
#: appTools/ToolMilling.py:1747
msgid "Milling"
msgstr "Milling"

#: appDatabase.py:278 appDatabase.py:2200
#: appGUI/preferences/excellon/ExcellonOptPrefGroupUI.py:54
#: appTools/ToolMilling.py:1746
msgid "Drilling"
msgstr "Drilling"

#: appDatabase.py:278 appDatabase.py:600 appDatabase.py:2208
#: appTools/ToolNCC.py:4173
msgid "Isolation"
msgstr "Isolation"

#: appDatabase.py:278 appDatabase.py:2216 appEditors/AppGeoEditor.py:531
#: appGUI/MainGUI.py:1621 appTools/ToolPaint.py:747
msgid "Paint"
msgstr "Paint"

#: appDatabase.py:278 appDatabase.py:2224 appTools/ToolNCC.py:1148
msgid "NCC"
msgstr "NCC"

#: appDatabase.py:278 appDatabase.py:2232 appTools/ToolCutOut.py:328
msgid "Cutout"
msgstr "Cutout"

#: appDatabase.py:294
#: appGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:218
#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:419
#: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:303
#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:322
#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:284
#: appTools/ToolIsolation.py:3530 appTools/ToolNCC.py:4451
#: appTools/ToolPaint.py:3152
msgid "Shape"
msgstr "Shape"

#: appDatabase.py:296
msgid ""
"Tool Shape. \n"
"Can be:\n"
"C1 ... C4 = circular tool with x flutes\n"
"B = ball tip milling tool\n"
"V = v-shape milling tool"
msgstr ""
"Tool Shape. \n"
"Can be:\n"
"C1 ... C4 = circular tool with x flutes\n"
"B = ball tip milling tool\n"
"V = v-shape milling tool"

#: appDatabase.py:310
msgid "V-Dia"
msgstr "V-Dia"

#: appDatabase.py:312
msgid ""
"V-Dia.\n"
"Diameter of the tip for V-Shape Tools."
msgstr ""
"V-Dia.\n"
"Diameter of the tip for V-Shape Tools."

#: appDatabase.py:324
msgid "V-Angle"
msgstr "V-Angle"

#: appDatabase.py:326
msgid ""
"V-Agle.\n"
"Angle at the tip for the V-Shape Tools."
msgstr ""
"V-Agle.\n"
"Angle at the tip for the V-Shape Tools."

#: appDatabase.py:343 appGUI/preferences/tools/ToolsISOPrefGroupUI.py:70
#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:53
#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:60
#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:70
msgid "Tool Type"
msgstr "Tool Type"

#: appDatabase.py:345
msgid ""
"Tool Type.\n"
"Can be:\n"
"Iso = isolation cut\n"
"Rough = rough cut, low feedrate, multiple passes\n"
"Finish = finishing cut, high feedrate"
msgstr ""
"Tool Type.\n"
"Can be:\n"
"Iso = isolation cut\n"
"Rough = rough cut, low feedrate, multiple passes\n"
"Finish = finishing cut, high feedrate"

#: appDatabase.py:359 appGUI/ObjectUI.py:1057
msgid "Tool Offset"
msgstr "Tool Offset"

#: appDatabase.py:361
msgid ""
"Tool Offset.\n"
"Can be of a few types:\n"
"Path = zero offset\n"
"In = offset inside by half of tool diameter\n"
"Out = offset outside by half of tool diameter\n"
"Custom = custom offset using the Custom Offset value"
msgstr ""
"Tool Offset.\n"
"Can be of a few types:\n"
"Path = zero offset\n"
"In = offset inside by half of tool diameter\n"
"Out = offset outside by half of tool diameter\n"
"Custom = custom offset using the Custom Offset value"

#: appDatabase.py:376
msgid "Custom Offset"
msgstr "Custom Offset"

#: appDatabase.py:378
msgid ""
"Custom Offset.\n"
"A value to be used as offset from the current path."
msgstr ""
"Custom Offset.\n"
"A value to be used as offset from the current path."

#: appDatabase.py:395 appDatabase.py:920 appEditors/appGCodeEditor.py:698
#: appGUI/ObjectUI.py:1202 appGUI/ObjectUI.py:2044
#: appGUI/preferences/geometry/GeometryOptPrefGroupUI.py:49
#: appGUI/preferences/tools/ToolsCalculatorsPrefGroupUI.py:78
#: appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:58
#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:57
#: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:115
#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:98
#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:103
#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:111
#: appTools/ToolCalculators.py:280 appTools/ToolCutOut.py:2121
#: appTools/ToolDrilling.py:2143 appTools/ToolMilling.py:1793
msgid "Cut Z"
msgstr "Cut Z"

#: appDatabase.py:397
msgid ""
"Cutting Depth.\n"
"The depth at which to cut into material."
msgstr ""
"Cutting Depth.\n"
"The depth at which to cut into material."

#: appDatabase.py:409 appDatabase.py:957
msgid "MultiDepth"
msgstr "MultiDepth"

#: appDatabase.py:411
msgid ""
"Multi Depth.\n"
"Selecting this will allow cutting in multiple passes,\n"
"each pass adding a DPP parameter depth."
msgstr ""
"Multi Depth.\n"
"Selecting this will allow cutting in multiple passes,\n"
"each pass adding a DPP parameter depth."

#: appDatabase.py:422 appDatabase.py:973
msgid "DPP"
msgstr "DPP"

#: appDatabase.py:424 appDatabase.py:975
msgid ""
"DPP. Depth per Pass.\n"
"The value used to cut into material on each pass."
msgstr ""
"DPP. Depth per Pass.\n"
"The value used to cut into material on each pass."

#: appDatabase.py:436 appDatabase.py:989 appGUI/ObjectUI.py:1249
#: appGUI/ObjectUI.py:1652
#: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:198
#: appGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:280
#: appGUI/preferences/geometry/GeometryOptPrefGroupUI.py:102
#: appGUI/preferences/tools/Tools2CalPrefGroupUI.py:61
#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:98
#: appObjects/FlatCAMGeometry.py:1967 appTools/ToolCalibration.py:769
#: appTools/ToolDrilling.py:1294 appTools/ToolDrilling.py:2189
#: appTools/ToolMilling.py:1291 appTools/ToolMilling.py:1839
msgid "Travel Z"
msgstr "Travel Z"

#: appDatabase.py:438
msgid ""
"Clearance Height.\n"
"Height at which the milling bit will travel between cuts,\n"
"above the surface of the material, avoiding all fixtures."
msgstr ""
"Clearance Height.\n"
"Height at which the milling bit will travel between cuts,\n"
"above the surface of the material, avoiding all fixtures."

#: appDatabase.py:451
msgid "ExtraCut"
msgstr "ExtraCut"

#: appDatabase.py:453
msgid ""
"Extra Cut.\n"
"If checked, after a isolation is finished an extra cut\n"
"will be added where the start and end of isolation meet\n"
"such as that this point is covered by this extra cut to\n"
"ensure a complete isolation."
msgstr ""
"Extra Cut.\n"
"If checked, after a isolation is finished an extra cut\n"
"will be added where the start and end of isolation meet\n"
"such as that this point is covered by this extra cut to\n"
"ensure a complete isolation."

#: appDatabase.py:466
msgid "E-Cut Length"
msgstr "E-Cut Length"

#: appDatabase.py:468
msgid ""
"Extra Cut length.\n"
"If checked, after a isolation is finished an extra cut\n"
"will be added where the start and end of isolation meet\n"
"such as that this point is covered by this extra cut to\n"
"ensure a complete isolation. This is the length of\n"
"the extra cut."
msgstr ""
"Extra Cut length.\n"
"If checked, after a isolation is finished an extra cut\n"
"will be added where the start and end of isolation meet\n"
"such as that this point is covered by this extra cut to\n"
"ensure a complete isolation. This is the length of\n"
"the extra cut."

#: appDatabase.py:489 appGUI/ObjectUI.py:1268
#: appGUI/preferences/geometry/GeometryOptPrefGroupUI.py:186
#: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:148
#: appTools/ToolMilling.py:1860 appTools/ToolSolderPaste.py:1326
msgid "Feedrate X-Y"
msgstr "Feedrate X-Y"

#: appDatabase.py:491
msgid ""
"Feedrate X-Y. Feedrate\n"
"The speed on XY plane used while cutting into material."
msgstr ""
"Feedrate X-Y. Feedrate\n"
"The speed on XY plane used while cutting into material."

#: appDatabase.py:503 appDatabase.py:1015 appGUI/ObjectUI.py:1282
#: appGUI/preferences/geometry/GeometryOptPrefGroupUI.py:201
#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:171
#: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:161
#: appTools/ToolDrilling.py:2210 appTools/ToolMilling.py:1875
#: appTools/ToolSolderPaste.py:1338
msgid "Feedrate Z"
msgstr "Feedrate Z"

#: appDatabase.py:505
msgid ""
"Feedrate Z\n"
"The speed on Z plane."
msgstr ""
"Feedrate Z\n"
"The speed on Z plane."

#: appDatabase.py:517
msgid "FR Rapids"
msgstr "FR Rapids"

#: appDatabase.py:519
msgid ""
"FR Rapids. Feedrate Rapids\n"
"Speed used while moving as fast as possible.\n"
"This is used only by some devices that can't use\n"
"the G0 g-code command. Mostly 3D printers."
msgstr ""
"FR Rapids. Feedrate Rapids\n"
"Speed used while moving as fast as possible.\n"
"This is used only by some devices that can't use\n"
"the G0 g-code command. Mostly 3D printers."

#: appDatabase.py:538 appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:186
msgid "Spindle Speed"
msgstr "Spindle Speed"

#: appDatabase.py:540
msgid ""
"Spindle Speed.\n"
"If it's left empty it will not be used.\n"
"The speed of the spindle in RPM."
msgstr ""
"Spindle Speed.\n"
"If it's left empty it will not be used.\n"
"The speed of the spindle in RPM."

#: appDatabase.py:553 appDatabase.py:1070 appGUI/ObjectUI.py:1356
#: appTools/ToolDrilling.py:2264 appTools/ToolMilling.py:1957
msgid "Dwell"
msgstr "Dwell"

#: appDatabase.py:555 appDatabase.py:1072
msgid ""
"Dwell.\n"
"Check this if a delay is needed to allow\n"
"the spindle motor to reach its set speed."
msgstr ""
"Dwell.\n"
"Check this if a delay is needed to allow\n"
"the spindle motor to reach its set speed."

#: appDatabase.py:566 appDatabase.py:1083
msgid "Dwelltime"
msgstr "Dwelltime"

#: appDatabase.py:568 appDatabase.py:1085
msgid ""
"Dwell Time.\n"
"A delay used to allow the motor spindle reach its set speed."
msgstr ""
"Dwell Time.\n"
"A delay used to allow the motor spindle reach its set speed."

#: appDatabase.py:592 appTools/ToolNCC.py:4165
msgid ""
"The 'Operation' can be:\n"
"- Isolation -> will ensure that the non-copper clearing is always complete.\n"
"If it's not successful then the non-copper clearing will fail, too.\n"
"- Clear -> the regular non-copper clearing."
msgstr ""
"The 'Operation' can be:\n"
"- Isolation -> will ensure that the non-copper clearing is always complete.\n"
"If it's not successful then the non-copper clearing will fail, too.\n"
"- Clear -> the regular non-copper clearing."

#: appDatabase.py:599 appEditors/AppGerberEditor.py:2832
#: appTools/ToolNCC.py:4172
msgid "Clear"
msgstr "Clear"

#: appDatabase.py:608 appDatabase.py:854
#: appGUI/preferences/excellon/ExcellonOptPrefGroupUI.py:62
#: appGUI/preferences/geometry/GeometryEditorPrefGroupUI.py:56
#: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:182
#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:137
#: appTools/ToolIsolation.py:3309 appTools/ToolMilling.py:1760
#: appTools/ToolNCC.py:4181
msgid "Milling Type"
msgstr "Milling Type"

#: appDatabase.py:610 appDatabase.py:618 appDatabase.py:856 appDatabase.py:864
#: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:184
#: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:192
#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:139
#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:147
#: appTools/ToolIsolation.py:3311 appTools/ToolIsolation.py:3319
#: appTools/ToolNCC.py:4183 appTools/ToolNCC.py:4191
msgid ""
"Milling type when the selected tool is of type: 'iso_op':\n"
"- climb / best for precision milling and to reduce tool usage\n"
"- conventional / useful when there is no backlash compensation"
msgstr ""
"Milling type when the selected tool is of type: 'iso_op':\n"
"- climb / best for precision milling and to reduce tool usage\n"
"- conventional / useful when there is no backlash compensation"

#: appDatabase.py:615 appDatabase.py:861
#: appGUI/preferences/geometry/GeometryEditorPrefGroupUI.py:62
#: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:189
#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:144
#: appTools/ToolIsolation.py:3316 appTools/ToolNCC.py:4188
msgid "Climb"
msgstr "Climb"

#: appDatabase.py:616 appDatabase.py:862
#: appGUI/preferences/geometry/GeometryEditorPrefGroupUI.py:63
#: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:190
#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:145
#: appTools/ToolIsolation.py:3317 appTools/ToolNCC.py:4189
msgid "Conventional"
msgstr "Conventional"

#: appDatabase.py:628 appDatabase.py:737 appDatabase.py:839 appDatabase.py:1113
#: appEditors/AppGeoEditor.py:453 appGUI/ObjectUI.py:1694
#: appGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:319
#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:251
#: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:167
#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:182
#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:161
#: appTools/ToolDrilling.py:2312 appTools/ToolIsolation.py:3294
#: appTools/ToolNCC.py:4204 appTools/ToolPaint.py:2973
msgid "Overlap"
msgstr "Overlap"

#: appDatabase.py:630 appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:184
#: appTools/ToolNCC.py:4206
msgid ""
"How much (percentage) of the tool width to overlap each tool pass.\n"
"Adjust the value starting with lower values\n"
"and increasing it if areas that should be cleared are still \n"
"not cleared.\n"
"Lower values = faster processing, faster execution on CNC.\n"
"Higher values = slow processing and slow execution on CNC\n"
"due of too many paths."
msgstr ""
"How much (percentage) of the tool width to overlap each tool pass.\n"
"Adjust the value starting with lower values\n"
"and increasing it if areas that should be cleared are still \n"
"not cleared.\n"
"Lower values = faster processing, faster execution on CNC.\n"
"Higher values = slow processing and slow execution on CNC\n"
"due of too many paths."

#: appDatabase.py:649 appDatabase.py:1157 appEditors/AppGeoEditor.py:473
#: appGUI/ObjectUI.py:1681
#: appGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:307
#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:72
#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:242
#: appGUI/preferences/tools/Tools2FiducialsPrefGroupUI.py:59
#: appGUI/preferences/tools/Tools2InvertPrefGroupUI.py:45
#: appGUI/preferences/tools/Tools2InvertPrefGroupUI.py:53
#: appGUI/preferences/tools/ToolsCornersPrefGroupUI.py:70
#: appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:115
#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:202
#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:181
#: appTools/ToolCopperThieving.py:1284 appTools/ToolCopperThieving.py:1560
#: appTools/ToolCorners.py:587 appTools/ToolCutOut.py:2174
#: appTools/ToolFiducials.py:815 appTools/ToolInvertGerber.py:231
#: appTools/ToolInvertGerber.py:239 appTools/ToolNCC.py:4248
#: appTools/ToolNCC.py:4351
msgid "Margin"
msgstr "Margin"

#: appDatabase.py:651 appGUI/ObjectUI.py:1683
#: appGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:309
#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:74
#: appGUI/preferences/tools/Tools2FiducialsPrefGroupUI.py:61
#: appGUI/preferences/tools/Tools2FiducialsPrefGroupUI.py:125
#: appGUI/preferences/tools/ToolsCornersPrefGroupUI.py:72
#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:204
#: appTools/ToolCopperThieving.py:1286 appTools/ToolCorners.py:589
#: appTools/ToolFiducials.py:817 appTools/ToolNCC.py:4250
#: appTools/ToolNCC.py:4353
msgid "Bounding box margin."
msgstr "Bounding box margin."

#: appDatabase.py:662 appDatabase.py:773 appEditors/AppGeoEditor.py:487
#: appGUI/ObjectUI.py:1709 appGUI/ObjectUI.py:2209
#: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:85
#: appGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:333
#: appGUI/preferences/tools/Tools2EDrillsPrefGroupUI.py:105
#: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:106
#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:215
#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:196
#: appTools/ToolExtractDrills.py:521 appTools/ToolNCC.py:4225
#: appTools/ToolPaint.py:3009 appTools/ToolPunchGerber.py:1118
msgid "Method"
msgstr "Method"

#: appDatabase.py:664 appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:217
#: appTools/ToolNCC.py:4227
msgid ""
"Algorithm for copper clearing:\n"
"- Standard: Fixed step inwards.\n"
"- Seed-based: Outwards from seed.\n"
"- Line-based: Parallel lines."
msgstr ""
"Algorithm for copper clearing:\n"
"- Standard: Fixed step inwards.\n"
"- Seed-based: Outwards from seed.\n"
"- Line-based: Parallel lines."

#: appDatabase.py:672 appDatabase.py:787 appEditors/AppGeoEditor.py:501
#: appGUI/ObjectUI.py:1719
#: appGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:343
#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:230
#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:215
#: appTools/ToolNCC.py:4240 appTools/ToolPaint.py:3023
#: tclCommands/TclCommandPaint.py:125
msgid "Standard"
msgstr "Standard"

#: appDatabase.py:672 appDatabase.py:787 appEditors/AppGeoEditor.py:501
#: appEditors/AppGeoEditor.py:571 appEditors/AppGeoEditor.py:5136
#: appGUI/ObjectUI.py:1719
#: appGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:343
#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:230
#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:215
#: appTools/ToolNCC.py:4240 appTools/ToolPaint.py:3023
#: tclCommands/TclCommandPaint.py:127
msgid "Seed"
msgstr "Seed"

#: appDatabase.py:672 appDatabase.py:787 appEditors/AppGeoEditor.py:501
#: appEditors/AppGeoEditor.py:5140 appGUI/ObjectUI.py:1719
#: appGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:343
#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:230
#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:215
#: appTools/ToolNCC.py:4240 appTools/ToolPaint.py:3023
#: tclCommands/TclCommandPaint.py:129
msgid "Lines"
msgstr "Lines"

#: appDatabase.py:672 appDatabase.py:787
#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:230
#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:215
#: appTools/ToolNCC.py:4240 appTools/ToolPaint.py:3023
#: tclCommands/TclCommandPaint.py:133
msgid "Combo"
msgstr "Combo"

#: appDatabase.py:680 appDatabase.py:798 appEditors/AppGeoEditor.py:508
#: appGUI/ObjectUI.py:2294 appGUI/ObjectUI.py:2317
#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:237
#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:222
#: appObjects/FlatCAMCNCJob.py:1310 appObjects/FlatCAMCNCJob.py:1332
#: appTools/ToolNCC.py:4261 appTools/ToolNCC.py:4364 appTools/ToolPaint.py:3034
msgid "Connect"
msgstr "Connect"

#: appDatabase.py:684 appDatabase.py:801 appEditors/AppGeoEditor.py:510
#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:239
#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:224
#: appTools/ToolNCC.py:4265 appTools/ToolNCC.py:4366 appTools/ToolPaint.py:3037
msgid ""
"Draw lines between resulting\n"
"segments to minimize tool lifts."
msgstr ""
"Draw lines between resulting\n"
"segments to minimize tool lifts."

#: appDatabase.py:690 appDatabase.py:805 appEditors/AppGeoEditor.py:518
#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:246
#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:230
#: appTools/ToolNCC.py:4271 appTools/ToolNCC.py:4372 appTools/ToolPaint.py:3041
msgid "Contour"
msgstr "Contour"

#: appDatabase.py:694 appDatabase.py:808 appEditors/AppGeoEditor.py:520
#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:248
#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:232
#: appTools/ToolNCC.py:4275 appTools/ToolNCC.py:4374 appTools/ToolPaint.py:3044
msgid ""
"Cut around the perimeter of the polygon\n"
"to trim rough edges."
msgstr ""
"Cut around the perimeter of the polygon\n"
"to trim rough edges."

#: appDatabase.py:700 appDatabase.py:758 appEditors/AppGeoEditor.py:614
#: appEditors/AppGerberEditor.py:5384 appEditors/appGCodeEditor.py:687
#: appGUI/ObjectUI.py:143 appGUI/ObjectUI.py:999 appGUI/ObjectUI.py:2034
#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:255
#: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:183
#: appTools/ToolEtchCompensation.py:417 appTools/ToolEtchCompensation.py:425
#: appTools/ToolNCC.py:4281 appTools/ToolNCC.py:4380 appTools/ToolPaint.py:2994
#: appTools/ToolPaint.py:3090 appTools/ToolTransform.py:517
msgid "Offset"
msgstr "Offset"

#: appDatabase.py:704 appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:257
#: appTools/ToolNCC.py:4285 appTools/ToolNCC.py:4382
msgid ""
"If used, it will add an offset to the copper features.\n"
"The copper clearing will finish to a distance\n"
"from the copper features.\n"
"The value can be between 0 and 10 FlatCAM units."
msgstr ""
"If used, it will add an offset to the copper features.\n"
"The copper clearing will finish to a distance\n"
"from the copper features.\n"
"The value can be between 0 and 10 FlatCAM units."

#: appDatabase.py:739 appEditors/AppGeoEditor.py:455
#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:163
#: appTools/ToolPaint.py:2975
msgid ""
"How much (percentage) of the tool width to overlap each tool pass.\n"
"Adjust the value starting with lower values\n"
"and increasing it if areas that should be painted are still \n"
"not painted.\n"
"Lower values = faster processing, faster execution on CNC.\n"
"Higher values = slow processing and slow execution on CNC\n"
"due of too many paths."
msgstr ""
"How much (percentage) of the tool width to overlap each tool pass.\n"
"Adjust the value starting with lower values\n"
"and increasing it if areas that should be painted are still \n"
"not painted.\n"
"Lower values = faster processing, faster execution on CNC.\n"
"Higher values = slow processing and slow execution on CNC\n"
"due of too many paths."

#: appDatabase.py:760 appEditors/AppGeoEditor.py:475
#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:183
#: appTools/ToolPaint.py:2996 appTools/ToolPaint.py:3092
msgid ""
"Distance by which to avoid\n"
"the edges of the polygon to\n"
"be painted."
msgstr ""
"Distance by which to avoid\n"
"the edges of the polygon to\n"
"be painted."

#: appDatabase.py:775 appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:198
#: appTools/ToolPaint.py:3011
msgid ""
"Algorithm for painting:\n"
"- Standard: Fixed step inwards.\n"
"- Seed-based: Outwards from seed.\n"
"- Line-based: Parallel lines.\n"
"- Laser-lines: Active only for Gerber objects.\n"
"Will create lines that follow the traces.\n"
"- Combo: In case of failure a new method will be picked from the above\n"
"in the order specified."
msgstr ""
"Algorithm for painting:\n"
"- Standard: Fixed step inwards.\n"
"- Seed-based: Outwards from seed.\n"
"- Line-based: Parallel lines.\n"
"- Laser-lines: Active only for Gerber objects.\n"
"Will create lines that follow the traces.\n"
"- Combo: In case of failure a new method will be picked from the above\n"
"in the order specified."

#: appDatabase.py:787 appDatabase.py:789
#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:215
#: appTools/ToolPaint.py:154 appTools/ToolPaint.py:550
#: appTools/ToolPaint.py:3023 appTools/ToolPaint.py:3025
#: tclCommands/TclCommandPaint.py:131
msgid "Laser_lines"
msgstr "Laser_lines"

#: appDatabase.py:826 appGUI/preferences/tools/ToolsISOPrefGroupUI.py:154
#: appTools/ToolIsolation.py:3281
msgid "Passes"
msgstr "Passes"

#: appDatabase.py:828 appGUI/preferences/tools/ToolsISOPrefGroupUI.py:156
#: appTools/ToolIsolation.py:3283
msgid ""
"Width of the isolation gap in\n"
"number (integer) of tool widths."
msgstr ""
"Width of the isolation gap in\n"
"number (integer) of tool widths."

#: appDatabase.py:841 appGUI/ObjectUI.py:1696
#: appGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:321
#: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:169
#: appTools/ToolIsolation.py:3296
msgid "How much (percentage) of the tool width to overlap each tool pass."
msgstr "How much (percentage) of the tool width to overlap each tool pass."

#: appDatabase.py:874 appGUI/ObjectUI.py:234
#: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:201
#: appTools/ToolIsolation.py:3329
msgid "Follow"
msgstr "Follow"

#: appDatabase.py:876 appDatabase.py:882 appGUI/ObjectUI.py:235
#: appGUI/preferences/gerber/GerberAdvOptPrefGroupUI.py:45
#: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:203
#: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:209
#: appTools/ToolIsolation.py:3331 appTools/ToolIsolation.py:3337
msgid ""
"Generate a 'Follow' geometry.\n"
"This means that it will cut through\n"
"the middle of the trace."
msgstr ""
"Generate a 'Follow' geometry.\n"
"This means that it will cut through\n"
"the middle of the trace."

#: appDatabase.py:891 appGUI/preferences/tools/ToolsISOPrefGroupUI.py:218
#: appTools/ToolIsolation.py:3346
msgid "Isolation Type"
msgstr "Isolation Type"

#: appDatabase.py:893 appGUI/preferences/tools/ToolsISOPrefGroupUI.py:220
#: appTools/ToolIsolation.py:3348
msgid ""
"Choose how the isolation will be executed:\n"
"- 'Full' -> complete isolation of polygons\n"
"- 'Ext' -> will isolate only on the outside\n"
"- 'Int' -> will isolate only on the inside\n"
"'Exterior' isolation is almost always possible\n"
"(with the right tool) but 'Interior'\n"
"isolation can be done only when there is an opening\n"
"inside of the polygon (e.g polygon is a 'doughnut' shape)."
msgstr ""
"Choose how the isolation will be executed:\n"
"- 'Full' -> complete isolation of polygons\n"
"- 'Ext' -> will isolate only on the outside\n"
"- 'Int' -> will isolate only on the inside\n"
"'Exterior' isolation is almost always possible\n"
"(with the right tool) but 'Interior'\n"
"isolation can be done only when there is an opening\n"
"inside of the polygon (e.g polygon is a 'doughnut' shape)."

#: appDatabase.py:902 appGUI/preferences/gerber/GerberAdvOptPrefGroupUI.py:72
#: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:229
#: appTools/ToolIsolation.py:3357
msgid "Full"
msgstr "Full"

#: appDatabase.py:903 appGUI/preferences/tools/ToolsISOPrefGroupUI.py:230
#: appTools/ToolIsolation.py:3358
msgid "Ext"
msgstr "Ext"

#: appDatabase.py:904 appGUI/preferences/tools/ToolsISOPrefGroupUI.py:231
#: appTools/ToolIsolation.py:3359
msgid "Int"
msgstr "Int"

#: appDatabase.py:922 appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:59
#: appTools/ToolDrilling.py:2145 appTools/ToolMilling.py:1795
msgid ""
"Drill depth (negative)\n"
"below the copper surface."
msgstr ""
"Drill depth (negative)\n"
"below the copper surface."

#: appDatabase.py:941 appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:284
#: appTools/ToolDrilling.py:2288 appTools/ToolMilling.py:1980
msgid "Offset Z"
msgstr "Offset Z"

#: appDatabase.py:943 appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:286
#: appTools/ToolDrilling.py:2290 appTools/ToolMilling.py:1982
msgid ""
"Some drill bits (the larger ones) need to drill deeper\n"
"to create the desired exit hole diameter due of the tip shape.\n"
"The value here can compensate the Cut Z parameter."
msgstr ""
"Some drill bits (the larger ones) need to drill deeper\n"
"to create the desired exit hole diameter due of the tip shape.\n"
"The value here can compensate the Cut Z parameter."

#: appDatabase.py:960 appGUI/ObjectUI.py:1226
#: appGUI/preferences/geometry/GeometryOptPrefGroupUI.py:72
#: appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:82
#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:80
#: appTools/ToolCutOut.py:2145 appTools/ToolDrilling.py:2167
#: appTools/ToolMilling.py:1817
msgid ""
"Use multiple passes to limit\n"
"the cut depth in each pass. Will\n"
"cut multiple times until Cut Z is\n"
"reached."
msgstr ""
"Use multiple passes to limit\n"
"the cut depth in each pass. Will\n"
"cut multiple times until Cut Z is\n"
"reached."

#: appDatabase.py:982 appGUI/ObjectUI.py:1240
#: appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:94
#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:92
#: appTools/ToolCutOut.py:2159 appTools/ToolDrilling.py:2180
#: appTools/ToolMilling.py:1830
msgid "Depth of each pass (positive)."
msgstr "Depth of each pass (positive)."

#: appDatabase.py:991 appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:100
#: appTools/ToolDrilling.py:2191 appTools/ToolMilling.py:1841
msgid ""
"Tool height when travelling\n"
"across the XY plane."
msgstr ""
"Tool height when travelling\n"
"across the XY plane."

#: appDatabase.py:1017 appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:173
#: appTools/ToolDrilling.py:2212 appTools/ToolMilling.py:1877
msgid ""
"Tool speed while drilling\n"
"(in units per minute).\n"
"So called 'Plunge' feedrate.\n"
"This is for linear move G01."
msgstr ""
"Tool speed while drilling\n"
"(in units per minute).\n"
"So called 'Plunge' feedrate.\n"
"This is for linear move G01."

#: appDatabase.py:1032 appGUI/ObjectUI.py:1297
#: appGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:67
#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:318
#: appTools/ToolDrilling.py:2227 appTools/ToolMilling.py:1892
msgid "Feedrate Rapids"
msgstr "Feedrate Rapids"

#: appDatabase.py:1034 appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:320
#: appTools/ToolDrilling.py:2229 appTools/ToolMilling.py:1894
msgid ""
"Tool speed while drilling\n"
"(in units per minute).\n"
"This is for the rapid move G00.\n"
"It is useful only for Marlin,\n"
"ignore for any other cases."
msgstr ""
"Tool speed while drilling\n"
"(in units per minute).\n"
"This is for the rapid move G00.\n"
"It is useful only for Marlin,\n"
"ignore for any other cases."

#: appDatabase.py:1055 appGUI/ObjectUI.py:1340
#: appGUI/preferences/geometry/GeometryOptPrefGroupUI.py:217
#: appObjects/FlatCAMGeometry.py:1983 appTools/ToolDrilling.py:1310
#: appTools/ToolDrilling.py:2249 appTools/ToolMilling.py:1307
#: appTools/ToolMilling.py:1942
msgid "Spindle speed"
msgstr "Spindle speed"

#: appDatabase.py:1057 appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:188
#: appTools/ToolDrilling.py:2251 appTools/ToolMilling.py:1944
msgid ""
"Speed of the spindle\n"
"in RPM (optional)"
msgstr ""
"Speed of the spindle\n"
"in RPM (optional)"

#: appDatabase.py:1102 appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:244
#: appTools/ToolDrilling.py:2304
msgid "Drill slots"
msgstr "Drill slots"

#: appDatabase.py:1104 appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:246
#: appTools/ToolDrilling.py:2306
msgid "If the selected tool has slots then they will be drilled."
msgstr "If the selected tool has slots then they will be drilled."

#: appDatabase.py:1115 appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:253
#: appTools/ToolDrilling.py:2314
msgid ""
"How much (percentage) of the tool diameter to overlap previous drill hole."
msgstr ""
"How much (percentage) of the tool diameter to overlap previous drill hole."

#: appDatabase.py:1129 appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:265
#: appTools/ToolDrilling.py:2328
msgid "Last drill"
msgstr "Last drill"

#: appDatabase.py:1131 appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:267
#: appTools/ToolDrilling.py:2330
msgid ""
"If the slot length is not completely covered by drill holes,\n"
"add a drill hole on the slot end point."
msgstr ""
"If the slot length is not completely covered by drill holes,\n"
"add a drill hole on the slot end point."

#: appDatabase.py:1159 appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:117
#: appTools/ToolCutOut.py:2176
msgid ""
"Margin over bounds. A positive value here\n"
"will make the cutout of the PCB further from\n"
"the actual PCB border"
msgstr ""
"Margin over bounds. A positive value here\n"
"will make the cutout of the PCB further from\n"
"the actual PCB border"

#: appDatabase.py:1171 appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:131
#: appTools/ToolCutOut.py:2184
msgid "Gap size"
msgstr "Gap size"

#: appDatabase.py:1173 appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:133
#: appTools/ToolCutOut.py:2186
msgid ""
"The size of the bridge gaps in the cutout\n"
"used to keep the board connected to\n"
"the surrounding material (the one \n"
"from which the PCB is cutout)."
msgstr ""
"The size of the bridge gaps in the cutout\n"
"used to keep the board connected to\n"
"the surrounding material (the one \n"
"from which the PCB is cutout)."

#: appDatabase.py:1182 appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:148
#: appTools/ToolCutOut.py:2199
msgid "Gap type"
msgstr "Gap type"

#: appDatabase.py:1184 appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:150
#: appTools/ToolCutOut.py:2201
msgid ""
"The type of gap:\n"
"- Bridge -> the cutout will be interrupted by bridges\n"
"- Thin -> same as 'bridge' but it will be thinner by partially milling the "
"gap\n"
"- M-Bites -> 'Mouse Bites' - same as 'bridge' but covered with drill holes"
msgstr ""
"The type of gap:\n"
"- Bridge -> the cutout will be interrupted by bridges\n"
"- Thin -> same as 'bridge' but it will be thinner by partially milling the "
"gap\n"
"- M-Bites -> 'Mouse Bites' - same as 'bridge' but covered with drill holes"

#: appDatabase.py:1192 appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:158
#: appTools/ToolCutOut.py:2209
msgid "Bridge"
msgstr "Bridge"

#: appDatabase.py:1193 appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:159
#: appTools/ToolCutOut.py:2210
msgid "Thin"
msgstr "Thin"

#: appDatabase.py:1204 appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:169
#: appTools/ToolCutOut.py:2220
msgid "Depth"
msgstr "Depth"

#: appDatabase.py:1206 appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:171
#: appTools/ToolCutOut.py:2222
msgid ""
"The depth until the milling is done\n"
"in order to thin the gaps."
msgstr ""
"The depth until the milling is done\n"
"in order to thin the gaps."

#: appDatabase.py:1223 appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:43
#: appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:186
#: appTools/ToolCalculators.py:289 appTools/ToolCutOut.py:2237
msgid "Tool Diameter"
msgstr "Tool Diameter"

#: appDatabase.py:1225 appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:188
#: appTools/ToolCutOut.py:2239
msgid "The drill hole diameter when doing mouse bites."
msgstr "The drill hole diameter when doing mouse bites."

#: appDatabase.py:1236
#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:164
#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:193
#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:222
#: appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:198
#: appTools/ToolCopperThieving.py:1431 appTools/ToolCopperThieving.py:1471
#: appTools/ToolCopperThieving.py:1511 appTools/ToolCutOut.py:2249
msgid "Spacing"
msgstr "Spacing"

#: appDatabase.py:1238 appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:200
#: appTools/ToolCutOut.py:2251
msgid "The spacing between drill holes when doing mouse bites."
msgstr "The spacing between drill holes when doing mouse bites."

#: appDatabase.py:1257 appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:233
#: appTools/ToolCutOut.py:2051
msgid "Convex Shape"
msgstr "Convex Shape"

#: appDatabase.py:1260 appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:235
#: appTools/ToolCutOut.py:2053 appTools/ToolCutOut.py:2058
msgid ""
"Create a convex shape surrounding the entire PCB.\n"
"Used only if the source object type is Gerber."
msgstr ""
"Create a convex shape surrounding the entire PCB.\n"
"Used only if the source object type is Gerber."

#: appDatabase.py:1268 appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:209
#: appTools/ToolCutOut.py:2280
msgid "Gaps"
msgstr "Gaps"

#: appDatabase.py:1270 appTools/ToolCutOut.py:2282
msgid ""
"Number of gaps used for the Automatic cutout.\n"
"There can be maximum 8 bridges/gaps.\n"
"The choices are:\n"
"- None  - no gaps\n"
"- lr    - left + right\n"
"- tb    - top + bottom\n"
"- 4     - left + right +top + bottom\n"
"- 2lr   - 2*left + 2*right\n"
"- 2tb  - 2*top + 2*bottom\n"
"- 8     - 2*left + 2*right +2*top + 2*bottom"
msgstr ""
"Number of gaps used for the Automatic cutout.\n"
"There can be maximum 8 bridges/gaps.\n"
"The choices are:\n"
"- None  - no gaps\n"
"- lr    - left + right\n"
"- tb    - top + bottom\n"
"- 4     - left + right +top + bottom\n"
"- 2lr   - 2*left + 2*right\n"
"- 2tb  - 2*top + 2*bottom\n"
"- 8     - 2*left + 2*right +2*top + 2*bottom"

#: appDatabase.py:1307
msgid "Add Tool in DB"
msgstr "Add Tool in DB"

#: appDatabase.py:1310
msgid ""
"Add a new tool in the Tools Database.\n"
"It will be used in the Geometry UI.\n"
"You can edit it after it is added."
msgstr ""
"Add a new tool in the Tools Database.\n"
"It will be used in the Geometry UI.\n"
"You can edit it after it is added."

#: appDatabase.py:1324
msgid "Delete Tool from DB"
msgstr "Delete Tool from DB"

#: appDatabase.py:1327
msgid "Remove a selection of tools in the Tools Database."
msgstr "Remove a selection of tools in the Tools Database."

#: appDatabase.py:1331
msgid "Export DB"
msgstr "Export DB"

#: appDatabase.py:1334
msgid "Save the Tools Database to a custom text file."
msgstr "Save the Tools Database to a custom text file."

#: appDatabase.py:1338
msgid "Import DB"
msgstr "Import DB"

#: appDatabase.py:1341
msgid "Load the Tools Database information's from a custom text file."
msgstr "Load the Tools Database information's from a custom text file."

#: appDatabase.py:1345
msgid "Save DB"
msgstr "Save DB"

#: appDatabase.py:1348
msgid "Save the Tools Database information's."
msgstr "Save the Tools Database information's."

#: appDatabase.py:1352
msgid "Transfer the Tool"
msgstr "Transfer the Tool"

#: appDatabase.py:1354
msgid ""
"Insert a new tool in the Tools Table of the\n"
"object/application tool after selecting a tool\n"
"in the Tools Database."
msgstr ""
"Insert a new tool in the Tools Table of the\n"
"object/application tool after selecting a tool\n"
"in the Tools Database."

#: appDatabase.py:1367 appGUI/MainGUI.py:1553
#: appGUI/preferences/PreferencesUIManager.py:949 app_Main.py:2500
#: app_Main.py:3527 app_Main.py:4471 app_Main.py:4724 app_Main.py:8998
msgid "Cancel"
msgstr "Cancel"

#: appDatabase.py:1380 appDatabase.py:1391 appEditors/AppExcEditor.py:4220
#: appEditors/AppExcEditor.py:4231 appEditors/appGCodeEditor.py:770
#: appEditors/appGCodeEditor.py:781 appGUI/ObjectUI.py:163
#: appGUI/ObjectUI.py:174 appTool.py:280 appTool.py:291
#: appTools/ToolAlignObjects.py:517 appTools/ToolAlignObjects.py:528
#: appTools/ToolCalculators.py:519 appTools/ToolCalculators.py:530
#: appTools/ToolCalibration.py:1395 appTools/ToolCalibration.py:1406
#: appTools/ToolCopperThieving.py:1716 appTools/ToolCopperThieving.py:1727
#: appTools/ToolCorners.py:675 appTools/ToolCorners.py:686
#: appTools/ToolCutOut.py:2454 appTools/ToolCutOut.py:2465
#: appTools/ToolDblSided.py:964 appTools/ToolDblSided.py:975
#: appTools/ToolDistance.py:660 appTools/ToolDistance.py:671
#: appTools/ToolDistanceMin.py:324 appTools/ToolDistanceMin.py:335
#: appTools/ToolDrilling.py:2666 appTools/ToolDrilling.py:2677
#: appTools/ToolEtchCompensation.py:477 appTools/ToolEtchCompensation.py:488
#: appTools/ToolExtractDrills.py:729 appTools/ToolExtractDrills.py:740
#: appTools/ToolFiducials.py:980 appTools/ToolFiducials.py:991
#: appTools/ToolFilm.py:1458 appTools/ToolFilm.py:1469
#: appTools/ToolImage.py:321 appTools/ToolImage.py:332
#: appTools/ToolInvertGerber.py:302 appTools/ToolInvertGerber.py:313
#: appTools/ToolIsolation.py:3599 appTools/ToolIsolation.py:3610
#: appTools/ToolMilling.py:2341 appTools/ToolMilling.py:2352
#: appTools/ToolNCC.py:4616 appTools/ToolNCC.py:4627
#: appTools/ToolOptimal.py:615 appTools/ToolOptimal.py:626
#: appTools/ToolPaint.py:3256 appTools/ToolPaint.py:3267
#: appTools/ToolPanelize.py:916 appTools/ToolPanelize.py:927
#: appTools/ToolPcbWizard.py:488 appTools/ToolPcbWizard.py:499
#: appTools/ToolPunchGerber.py:1337 appTools/ToolPunchGerber.py:1348
#: appTools/ToolQRCode.py:930 appTools/ToolQRCode.py:941
#: appTools/ToolRulesCheck.py:1664 appTools/ToolRulesCheck.py:1675
#: appTools/ToolSolderPaste.py:1576 appTools/ToolSolderPaste.py:1587
#: appTools/ToolSub.py:825 appTools/ToolSub.py:836
#: appTools/ToolTransform.py:964 appTools/ToolTransform.py:975
msgid "Edited value is out of range"
msgstr "Edited value is out of range"

#: appDatabase.py:1386 appDatabase.py:1393 appEditors/AppExcEditor.py:4226
#: appEditors/AppExcEditor.py:4233 appEditors/appGCodeEditor.py:776
#: appEditors/appGCodeEditor.py:783 appGUI/ObjectUI.py:169
#: appGUI/ObjectUI.py:176 appTool.py:286 appTool.py:293
#: appTools/ToolAlignObjects.py:523 appTools/ToolAlignObjects.py:530
#: appTools/ToolCalculators.py:525 appTools/ToolCalculators.py:532
#: appTools/ToolCalibration.py:1401 appTools/ToolCalibration.py:1408
#: appTools/ToolCopperThieving.py:1722 appTools/ToolCopperThieving.py:1729
#: appTools/ToolCorners.py:681 appTools/ToolCorners.py:688
#: appTools/ToolCutOut.py:2460 appTools/ToolCutOut.py:2467
#: appTools/ToolDblSided.py:970 appTools/ToolDblSided.py:977
#: appTools/ToolDistance.py:666 appTools/ToolDistance.py:673
#: appTools/ToolDistanceMin.py:330 appTools/ToolDistanceMin.py:337
#: appTools/ToolDrilling.py:2672 appTools/ToolDrilling.py:2679
#: appTools/ToolEtchCompensation.py:483 appTools/ToolEtchCompensation.py:490
#: appTools/ToolExtractDrills.py:735 appTools/ToolExtractDrills.py:742
#: appTools/ToolFiducials.py:986 appTools/ToolFiducials.py:993
#: appTools/ToolFilm.py:1464 appTools/ToolFilm.py:1471
#: appTools/ToolImage.py:327 appTools/ToolImage.py:334
#: appTools/ToolInvertGerber.py:308 appTools/ToolInvertGerber.py:315
#: appTools/ToolIsolation.py:3605 appTools/ToolIsolation.py:3612
#: appTools/ToolMilling.py:2347 appTools/ToolMilling.py:2354
#: appTools/ToolNCC.py:4622 appTools/ToolNCC.py:4629
#: appTools/ToolOptimal.py:621 appTools/ToolOptimal.py:628
#: appTools/ToolPaint.py:3262 appTools/ToolPaint.py:3269
#: appTools/ToolPanelize.py:922 appTools/ToolPanelize.py:929
#: appTools/ToolPcbWizard.py:494 appTools/ToolPcbWizard.py:501
#: appTools/ToolPunchGerber.py:1343 appTools/ToolPunchGerber.py:1350
#: appTools/ToolQRCode.py:936 appTools/ToolQRCode.py:943
#: appTools/ToolRulesCheck.py:1670 appTools/ToolRulesCheck.py:1677
#: appTools/ToolSolderPaste.py:1582 appTools/ToolSolderPaste.py:1589
#: appTools/ToolSub.py:831 appTools/ToolSub.py:838
#: appTools/ToolTransform.py:970 appTools/ToolTransform.py:977
msgid "Edited value is within limits."
msgstr "Edited value is within limits."

#: appDatabase.py:1647
msgid "Add to DB"
msgstr "Add to DB"

#: appDatabase.py:1650
msgid "Copy from DB"
msgstr "Copy from DB"

#: appDatabase.py:1653
msgid "Delete from DB"
msgstr "Delete from DB"

#: appDatabase.py:1658 appTranslation.py:209 app_Main.py:3521 app_Main.py:8992
msgid "Save changes"
msgstr "Save changes"

#: appDatabase.py:1727 appDatabase.py:2186 appDatabase.py:2605
#: appDatabase.py:2617 appGUI/MainGUI.py:490 appObjects/FlatCAMGeometry.py:1239
#: appTools/ToolCutOut.py:467 appTools/ToolCutOut.py:489
#: appTools/ToolCutOut.py:530 appTools/ToolIsolation.py:2676
#: appTools/ToolIsolation.py:2686 appTools/ToolIsolation.py:2770
#: appTools/ToolNCC.py:3816 appTools/ToolNCC.py:3826 appTools/ToolNCC.py:3906
#: appTools/ToolPaint.py:2632 appTools/ToolPaint.py:2642
#: appTools/ToolPaint.py:2731 app_Main.py:5851 app_Main.py:5888
#: app_Main.py:5920 app_Main.py:5931 app_Main.py:5940 app_Main.py:5950
msgid "Tools Database"
msgstr "Tools Database"

#: appDatabase.py:1738 appDatabase.py:2130 appDatabase.py:2164
#: appObjects/FlatCAMGeometry.py:1052 appTools/ToolCutOut.py:294
#: appTools/ToolDrilling.py:895 appTools/ToolIsolation.py:1167
#: appTools/ToolNCC.py:1113 appTools/ToolPaint.py:713 app_Main.py:5847
msgid "Could not load Tools DB file."
msgstr "Could not load Tools DB file."

#: appDatabase.py:1746 appDatabase.py:2172 appObjects/FlatCAMGeometry.py:1063
#: appTools/ToolCutOut.py:305 appTools/ToolDrilling.py:903
#: appTools/ToolIsolation.py:1178 appTools/ToolNCC.py:1124
#: appTools/ToolPaint.py:724
msgid "Failed to parse Tools DB file."
msgstr "Failed to parse Tools DB file."

#: appDatabase.py:1749 appDatabase.py:2175
msgid "Loaded Tools DB from"
msgstr "Loaded Tools DB from"

#: appDatabase.py:2029
msgid "Tool added to DB."
msgstr "Tool added to DB."

#: appDatabase.py:2062
msgid "Tool copied from Tools DB."
msgstr "Tool copied from Tools DB."

#: appDatabase.py:2089
msgid "Tool removed from Tools DB."
msgstr "Tool removed from Tools DB."

#: appDatabase.py:2102
msgid "Export Tools Database"
msgstr "Export Tools Database"

#: appDatabase.py:2104
msgid "Tools_Database"
msgstr "Tools_Database"

#: appDatabase.py:2141 appDatabase.py:2144 appDatabase.py:2247
msgid "Failed to write Tools DB to file."
msgstr "Failed to write Tools DB to file."

#: appDatabase.py:2147
msgid "Exported Tools DB to"
msgstr "Exported Tools DB to"

#: appDatabase.py:2154
msgid "Import FlatCAM Tools DB"
msgstr "Import FlatCAM Tools DB"

#: appDatabase.py:2251
msgid "Saved Tools DB."
msgstr "Saved Tools DB."

#: appDatabase.py:2424
msgid ""
"To change tool properties select only one tool. Tools currently selected"
msgstr ""
"To change tool properties select only one tool. Tools currently selected"

#: appDatabase.py:2581
msgid "No Tool/row selected in the Tools Database table"
msgstr "No Tool/row selected in the Tools Database table"

#: appDatabase.py:2585 appTools/ToolDrilling.py:907
msgid "Tools DB empty."
msgstr "Tools DB empty."

#: appDatabase.py:2612
msgid "Tools in Tools Database edited but not saved."
msgstr "Tools in Tools Database edited but not saved."

#: appDatabase.py:2621
msgid "Cancelled adding tool from DB."
msgstr "Cancelled adding tool from DB."

#: appEditors/AppExcEditor.py:231 appEditors/AppExcEditor.py:255
#: appEditors/AppExcEditor.py:349 appEditors/AppExcEditor.py:566
#: appEditors/AppExcEditor.py:769 appEditors/AppGerberEditor.py:246
#: appEditors/AppGerberEditor.py:253
msgid "Click to place ..."
msgstr "Click to place ..."

#: appEditors/AppExcEditor.py:239
msgid "To add a drill first select a tool"
msgstr "To add a drill first select a tool"

#: appEditors/AppExcEditor.py:303 appEditors/AppExcEditor.py:535
#: appEditors/AppExcEditor.py:739 appEditors/AppExcEditor.py:1062
#: appEditors/AppExcEditor.py:1291 appEditors/AppExcEditor.py:1394
#: appEditors/AppExcEditor.py:1505 appEditors/AppExcEditor.py:3125
#: appEditors/AppExcEditor.py:3132 appEditors/AppGeoEditor.py:4256
#: appEditors/AppGeoEditor.py:4270 appEditors/AppGerberEditor.py:1097
#: appEditors/AppGerberEditor.py:1337 appEditors/AppGerberEditor.py:1536
#: appEditors/AppGerberEditor.py:1818 appEditors/AppGerberEditor.py:4688
#: appEditors/AppGerberEditor.py:4705 appGUI/MainGUI.py:2996
#: appGUI/MainGUI.py:3008 appTools/ToolAlignObjects.py:253
#: appTools/ToolAlignObjects.py:275 app_Main.py:5092 app_Main.py:5246
#: tclCommands/TclCommandPanelize.py:296 tclCommands/TclCommandPanelize.py:305
msgid "Done."
msgstr "Done."

#: appEditors/AppExcEditor.py:357
msgid "To add an Drill Array first select a tool in Tool Table"
msgstr "To add an Drill Array first select a tool in Tool Table"

#: appEditors/AppExcEditor.py:373 appEditors/AppExcEditor.py:595
#: appEditors/AppExcEditor.py:816 appEditors/AppExcEditor.py:1362
#: appEditors/AppGerberEditor.py:477 appEditors/AppGerberEditor.py:1996
#: appEditors/AppGerberEditor.py:2026 appGUI/MainGUI.py:3607
msgid "Click on target location ..."
msgstr "Click on target location ..."

#: appEditors/AppExcEditor.py:392
msgid "Click on the Drill Circular Array Start position"
msgstr "Click on the Drill Circular Array Start position"

#: appEditors/AppExcEditor.py:414 appEditors/AppExcEditor.py:857
#: appEditors/AppGerberEditor.py:522
msgid "The value is not Float. Check for comma instead of dot separator."
msgstr "The value is not Float. Check for comma instead of dot separator."

#: appEditors/AppExcEditor.py:418
msgid "The value is mistyped. Check the value"
msgstr "The value is mistyped. Check the value"

#: appEditors/AppExcEditor.py:517
msgid "Too many drills for the selected spacing angle."
msgstr "Too many drills for the selected spacing angle."

#: appEditors/AppExcEditor.py:574
msgid "To add a slot first select a tool"
msgstr "To add a slot first select a tool"

#: appEditors/AppExcEditor.py:634 appEditors/AppExcEditor.py:641
#: appEditors/AppExcEditor.py:922 appEditors/AppExcEditor.py:929
msgid "Value is missing or wrong format. Add it and retry."
msgstr "Value is missing or wrong format. Add it and retry."

#: appEditors/AppExcEditor.py:777
msgid "To add an Slot Array first select a tool in Tool Table"
msgstr "To add an Slot Array first select a tool in Tool Table"

#: appEditors/AppExcEditor.py:835
msgid "Click on the Slot Circular Array Start position"
msgstr "Click on the Slot Circular Array Start position"

#: appEditors/AppExcEditor.py:860 appEditors/AppGerberEditor.py:525
msgid "The value is mistyped. Check the value."
msgstr "The value is mistyped. Check the value."

#: appEditors/AppExcEditor.py:1039
msgid "Too many Slots for the selected spacing angle."
msgstr "Too many Slots for the selected spacing angle."

#: appEditors/AppExcEditor.py:1084
msgid "Click on the Drill(s) to resize ..."
msgstr "Click on the Drill(s) to resize ..."

#: appEditors/AppExcEditor.py:1114
msgid "Resize drill(s) failed. Please enter a diameter for resize."
msgstr "Resize drill(s) failed. Please enter a diameter for resize."

#: appEditors/AppExcEditor.py:1293 appEditors/AppExcEditor.py:1346
#: appEditors/AppExcEditor.py:1357 appGUI/MainGUI.py:3613
msgid "Cancelled. Nothing selected."
msgstr "Cancelled. Nothing selected."

#: appEditors/AppExcEditor.py:1350 appEditors/AppGerberEditor.py:1998
msgid "Click on reference location ..."
msgstr "Click on reference location ..."

#: appEditors/AppExcEditor.py:1908 appObjects/FlatCAMExcellon.py:330
#: appTools/ToolDrilling.py:571 appTools/ToolMilling.py:494
msgid "Total Drills"
msgstr "Total Drills"

#: appEditors/AppExcEditor.py:1940 appObjects/FlatCAMExcellon.py:364
#: appTools/ToolDrilling.py:598 appTools/ToolMilling.py:521
msgid "Total Slots"
msgstr "Total Slots"

#: appEditors/AppExcEditor.py:2014 appObjects/FlatCAMGeometry.py:725
#: appObjects/FlatCAMGeometry.py:1384 appObjects/FlatCAMGeometry.py:2136
#: appObjects/FlatCAMGeometry.py:2888 appTools/ToolIsolation.py:1348
#: appTools/ToolIsolation.py:1800 appTools/ToolNCC.py:1299
#: appTools/ToolNCC.py:1437 appTools/ToolPaint.py:898
#: appTools/ToolPaint.py:1036 appTools/ToolPaint.py:1749
#: appTools/ToolSolderPaste.py:455 appTools/ToolSolderPaste.py:527
msgid "Wrong value format entered, use a number."
msgstr "Wrong value format entered, use a number."

#: appEditors/AppExcEditor.py:2025
msgid ""
"Tool already in the original or actual tool list.\n"
"Save and reedit Excellon if you need to add this tool. "
msgstr ""
"Tool already in the original or actual tool list.\n"
"Save and reedit Excellon if you need to add this tool. "

#: appEditors/AppExcEditor.py:2033 appGUI/MainGUI.py:3649
msgid "Added new tool with dia"
msgstr "Added new tool with dia"

#: appEditors/AppExcEditor.py:2067
msgid "Select a tool in Tool Table"
msgstr "Select a tool in Tool Table"

#: appEditors/AppExcEditor.py:2097
msgid "Deleted tool with diameter"
msgstr "Deleted tool with diameter"

#: appEditors/AppExcEditor.py:2244
msgid "Done. Tool edit completed."
msgstr "Done. Tool edit completed."

#: appEditors/AppExcEditor.py:2860
msgid "There are no Tools definitions in the file. Aborting Excellon creation."
msgstr ""
"There are no Tools definitions in the file. Aborting Excellon creation."

#: appEditors/AppExcEditor.py:2864
msgid "An internal error has ocurred. See Shell.\n"
msgstr "An internal error has ocurred. See Shell.\n"

#: appEditors/AppExcEditor.py:2869
msgid "Creating Excellon."
msgstr "Creating Excellon."

#: appEditors/AppExcEditor.py:2883
msgid "Excellon editing finished."
msgstr "Excellon editing finished."

#: appEditors/AppExcEditor.py:2899
msgid "Cancelled. There is no Tool/Drill selected"
msgstr "Cancelled. There is no Tool/Drill selected"

#: appEditors/AppExcEditor.py:3494
msgid "Done. Drill(s) deleted."
msgstr "Done. Drill(s) deleted."

#: appEditors/AppExcEditor.py:3567 appEditors/AppExcEditor.py:3577
#: appEditors/AppGerberEditor.py:5136
msgid "Click on the circular array Center position"
msgstr "Click on the circular array Center position"

#: appEditors/AppExcEditor.py:3708 appGUI/MainGUI.py:706 appGUI/ObjectUI.py:579
#: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:26
msgid "Excellon Editor"
msgstr "Excellon Editor"

#: appEditors/AppExcEditor.py:3715 appEditors/AppGerberEditor.py:2552
#: appEditors/appGCodeEditor.py:669
msgid "Name:"
msgstr "Name:"

#: appEditors/AppExcEditor.py:3721 appGUI/ObjectUI.py:620
#: appGUI/ObjectUI.py:967 appTools/ToolIsolation.py:3115
#: appTools/ToolNCC.py:3986 appTools/ToolPaint.py:2818
#: appTools/ToolSolderPaste.py:1156
msgid "Tools Table"
msgstr "Tools Table"

#: appEditors/AppExcEditor.py:3723 appGUI/ObjectUI.py:622
msgid ""
"Tools in this Excellon object\n"
"when are used for drilling."
msgstr ""
"Tools in this Excellon object\n"
"when are used for drilling."

#: appEditors/AppExcEditor.py:3744
msgid "Convert Slots"
msgstr "Convert Slots"

#: appEditors/AppExcEditor.py:3746
msgid "Convert the slots in the selected tools to drills."
msgstr "Convert the slots in the selected tools to drills."

#: appEditors/AppExcEditor.py:3756
msgid "Add/Delete Tool"
msgstr "Add/Delete Tool"

#: appEditors/AppExcEditor.py:3758
msgid ""
"Add/Delete a tool to the tool list\n"
"for this Excellon object."
msgstr ""
"Add/Delete a tool to the tool list\n"
"for this Excellon object."

#: appEditors/AppExcEditor.py:3768 appGUI/ObjectUI.py:1082
#: appGUI/ObjectUI.py:1639
#: appGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:268
#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:130
#: appTools/ToolCutOut.py:2077 appTools/ToolIsolation.py:3196
#: appTools/ToolNCC.py:4079 appTools/ToolNCC.py:4090 appTools/ToolPaint.py:2900
msgid "Tool Dia"
msgstr "Tool Dia"

#: appEditors/AppExcEditor.py:3770 appGUI/ObjectUI.py:1084
#: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:57
#: appTools/ToolIsolation.py:3198 appTools/ToolNCC.py:4081
msgid "Diameter for the new tool"
msgstr "Diameter for the new tool"

#: appEditors/AppExcEditor.py:3780
msgid "Add Tool"
msgstr "Add Tool"

#: appEditors/AppExcEditor.py:3782
msgid ""
"Add a new tool to the tool list\n"
"with the diameter specified above."
msgstr ""
"Add a new tool to the tool list\n"
"with the diameter specified above."

#: appEditors/AppExcEditor.py:3794
msgid "Delete Tool"
msgstr "Delete Tool"

#: appEditors/AppExcEditor.py:3796
msgid ""
"Delete a tool in the tool list\n"
"by selecting a row in the tool table."
msgstr ""
"Delete a tool in the tool list\n"
"by selecting a row in the tool table."

#: appEditors/AppExcEditor.py:3814 appGUI/MainGUI.py:4800
msgid "Resize Drill(s)"
msgstr "Resize Drill(s)"

#: appEditors/AppExcEditor.py:3816
msgid "Resize a drill or a selection of drills."
msgstr "Resize a drill or a selection of drills."

#: appEditors/AppExcEditor.py:3823
msgid "Resize Dia"
msgstr "Resize Dia"

#: appEditors/AppExcEditor.py:3825
msgid "Diameter to resize to."
msgstr "Diameter to resize to."

#: appEditors/AppExcEditor.py:3838
msgid "Resize"
msgstr "Resize"

#: appEditors/AppExcEditor.py:3840
msgid "Resize drill(s)"
msgstr "Resize drill(s)"

#: appEditors/AppExcEditor.py:3865 appGUI/MainGUI.py:711 appGUI/MainGUI.py:1679
#: appGUI/MainGUI.py:4794
msgid "Add Drill Array"
msgstr "Add Drill Array"

#: appEditors/AppExcEditor.py:3867
msgid "Add an array of drills (linear or circular array)"
msgstr "Add an array of drills (linear or circular array)"

#: appEditors/AppExcEditor.py:3873
msgid ""
"Select the type of drills array to create.\n"
"It can be Linear X(Y) or Circular"
msgstr ""
"Select the type of drills array to create.\n"
"It can be Linear X(Y) or Circular"

#: appEditors/AppExcEditor.py:3876 appEditors/AppExcEditor.py:4090
#: appEditors/AppGerberEditor.py:2865
msgid "Linear"
msgstr "Linear"

#: appEditors/AppExcEditor.py:3877 appEditors/AppExcEditor.py:4091
#: appEditors/AppGerberEditor.py:2866
#: appGUI/preferences/tools/Tools2EDrillsPrefGroupUI.py:52
#: appGUI/preferences/tools/Tools2EDrillsPrefGroupUI.py:149
#: appGUI/preferences/tools/Tools2FiducialsPrefGroupUI.py:107
#: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:52
#: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:151
#: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:78
#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:61
#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:68
#: appTools/ToolExtractDrills.py:471 appTools/ToolExtractDrills.py:589
#: appTools/ToolFiducials.py:863 appTools/ToolPunchGerber.py:1044
#: appTools/ToolPunchGerber.py:1201
msgid "Circular"
msgstr "Circular"

#: appEditors/AppExcEditor.py:3885
#: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:68
msgid "Nr of drills"
msgstr "Nr of drills"

#: appEditors/AppExcEditor.py:3886
#: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:70
msgid "Specify how many drills to be in the array."
msgstr "Specify how many drills to be in the array."

#: appEditors/AppExcEditor.py:3904 appEditors/AppExcEditor.py:3954
#: appEditors/AppExcEditor.py:4026 appEditors/AppExcEditor.py:4119
#: appEditors/AppExcEditor.py:4170 appEditors/AppGerberEditor.py:1632
#: appEditors/AppGerberEditor.py:2894 appEditors/AppGerberEditor.py:2943
#: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:178
msgid "Direction"
msgstr "Direction"

#: appEditors/AppExcEditor.py:3906 appEditors/AppExcEditor.py:4121
#: appEditors/AppGerberEditor.py:2896
#: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:86
#: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:234
#: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:123
msgid ""
"Direction on which the linear array is oriented:\n"
"- 'X' - horizontal axis \n"
"- 'Y' - vertical axis or \n"
"- 'Angle' - a custom angle for the array inclination"
msgstr ""
"Direction on which the linear array is oriented:\n"
"- 'X' - horizontal axis \n"
"- 'Y' - vertical axis or \n"
"- 'Angle' - a custom angle for the array inclination"

#: appEditors/AppExcEditor.py:3913 appEditors/AppExcEditor.py:4035
#: appEditors/AppExcEditor.py:4128 appEditors/AppGerberEditor.py:2903
#: appGUI/GUIElements.py:4245 appGUI/MainGUI.py:478 appGUI/MainGUI.py:671
#: appGUI/MainGUI.py:4432 appGUI/MainGUI.py:4698
#: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:92
#: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:187
#: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:240
#: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:129
#: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:197
#: appTools/ToolFilm.py:1107
msgid "X"
msgstr "X"

#: appEditors/AppExcEditor.py:3914 appEditors/AppExcEditor.py:4036
#: appEditors/AppExcEditor.py:4129 appEditors/AppGerberEditor.py:2904
#: appGUI/GUIElements.py:4252 appGUI/MainGUI.py:481 appGUI/MainGUI.py:4433
#: appGUI/MainGUI.py:4699
#: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:93
#: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:188
#: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:241
#: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:130
#: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:198
#: appTools/ToolFilm.py:1108
msgid "Y"
msgstr "Y"

#: appEditors/AppExcEditor.py:3915 appEditors/AppExcEditor.py:3932
#: appEditors/AppExcEditor.py:3966 appEditors/AppExcEditor.py:4037
#: appEditors/AppExcEditor.py:4041 appEditors/AppExcEditor.py:4130
#: appEditors/AppExcEditor.py:4148 appEditors/AppExcEditor.py:4182
#: appEditors/AppGeoEditor.py:686 appEditors/AppGerberEditor.py:2905
#: appEditors/AppGerberEditor.py:2922 appEditors/AppGerberEditor.py:2958
#: appEditors/AppGerberEditor.py:5456
#: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:94
#: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:113
#: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:189
#: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:194
#: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:242
#: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:263
#: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:131
#: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:149
#: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:96
#: appTools/ToolDistance.py:627 appTools/ToolDistanceMin.py:256
#: appTools/ToolTransform.py:617
msgid "Angle"
msgstr "Angle"

#: appEditors/AppExcEditor.py:3919 appEditors/AppExcEditor.py:4134
#: appEditors/AppGerberEditor.py:2909
#: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:100
#: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:248
#: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:137
msgid "Pitch"
msgstr "Pitch"

#: appEditors/AppExcEditor.py:3921 appEditors/AppExcEditor.py:4136
#: appEditors/AppGerberEditor.py:2911
#: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:102
#: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:250
#: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:139
msgid "Pitch = Distance between elements of the array."
msgstr "Pitch = Distance between elements of the array."

#: appEditors/AppExcEditor.py:3934 appEditors/AppExcEditor.py:4150
msgid ""
"Angle at which the linear array is placed.\n"
"The precision is of max 2 decimals.\n"
"Min value is: -360 degrees.\n"
"Max value is:  360.00 degrees."
msgstr ""
"Angle at which the linear array is placed.\n"
"The precision is of max 2 decimals.\n"
"Min value is: -360 degrees.\n"
"Max value is:  360.00 degrees."

#: appEditors/AppExcEditor.py:3955 appEditors/AppExcEditor.py:4171
#: appEditors/AppGerberEditor.py:2945
msgid ""
"Direction for circular array.Can be CW = clockwise or CCW = counter "
"clockwise."
msgstr ""
"Direction for circular array.Can be CW = clockwise or CCW = counter "
"clockwise."

#: appEditors/AppExcEditor.py:3962 appEditors/AppExcEditor.py:4178
#: appEditors/AppGerberEditor.py:2953
#: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:136
#: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:286
#: appGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:145
#: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:171
#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:367
msgid "CW"
msgstr "CW"

#: appEditors/AppExcEditor.py:3963 appEditors/AppExcEditor.py:4179
#: appEditors/AppGerberEditor.py:2954
#: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:137
#: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:287
#: appGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:146
#: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:172
#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:368
msgid "CCW"
msgstr "CCW"

#: appEditors/AppExcEditor.py:3967 appEditors/AppExcEditor.py:4183
#: appEditors/AppGerberEditor.py:2960
#: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:115
#: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:145
#: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:265
#: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:295
#: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:151
#: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:180
msgid "Angle at which each element in circular array is placed."
msgstr "Angle at which each element in circular array is placed."

#: appEditors/AppExcEditor.py:4001
msgid "Slot Parameters"
msgstr "Slot Parameters"

#: appEditors/AppExcEditor.py:4003
msgid ""
"Parameters for adding a slot (hole with oval shape)\n"
"either single or as an part of an array."
msgstr ""
"Parameters for adding a slot (hole with oval shape)\n"
"either single or as an part of an array."

#: appEditors/AppExcEditor.py:4012
#: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:162
#: appGUI/preferences/tools/ToolsCornersPrefGroupUI.py:83
#: appObjects/FlatCAMObj.py:877 appTools/ToolCorners.py:574
#: appTools/ToolProperties.py:571
msgid "Length"
msgstr "Length"

#: appEditors/AppExcEditor.py:4014
#: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:164
msgid "Length = The length of the slot."
msgstr "Length = The length of the slot."

#: appEditors/AppExcEditor.py:4028
#: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:180
msgid ""
"Direction on which the slot is oriented:\n"
"- 'X' - horizontal axis \n"
"- 'Y' - vertical axis or \n"
"- 'Angle' - a custom angle for the slot inclination"
msgstr ""
"Direction on which the slot is oriented:\n"
"- 'X' - horizontal axis \n"
"- 'Y' - vertical axis or \n"
"- 'Angle' - a custom angle for the slot inclination"

#: appEditors/AppExcEditor.py:4043
msgid ""
"Angle at which the slot is placed.\n"
"The precision is of max 2 decimals.\n"
"Min value is: -360 degrees.\n"
"Max value is:  360.00 degrees."
msgstr ""
"Angle at which the slot is placed.\n"
"The precision is of max 2 decimals.\n"
"Min value is: -360 degrees.\n"
"Max value is:  360.00 degrees."

#: appEditors/AppExcEditor.py:4076
msgid "Slot Array Parameters"
msgstr "Slot Array Parameters"

#: appEditors/AppExcEditor.py:4078
msgid "Parameters for the array of slots (linear or circular array)"
msgstr "Parameters for the array of slots (linear or circular array)"

#: appEditors/AppExcEditor.py:4087
msgid ""
"Select the type of slot array to create.\n"
"It can be Linear X(Y) or Circular"
msgstr ""
"Select the type of slot array to create.\n"
"It can be Linear X(Y) or Circular"

#: appEditors/AppExcEditor.py:4099
#: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:219
msgid "Nr of slots"
msgstr "Nr of slots"

#: appEditors/AppExcEditor.py:4100
#: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:221
msgid "Specify how many slots to be in the array."
msgstr "Specify how many slots to be in the array."

#: appEditors/AppExcEditor.py:4203 appEditors/AppGeoEditor.py:3311
#: appEditors/AppGerberEditor.py:2982 appEditors/appGCodeEditor.py:753
#: appGUI/MainGUI.py:346 appGUI/MainGUI.py:1696 app_Main.py:2494
msgid "Exit Editor"
msgstr "Exit Editor"

#: appEditors/AppExcEditor.py:4206 appEditors/AppGeoEditor.py:3314
#: appEditors/AppGerberEditor.py:2985 appEditors/appGCodeEditor.py:756
msgid "Exit from Editor."
msgstr "Exit from Editor."

#: appEditors/AppGeoEditor.py:52
msgid "Buffer Selection"
msgstr "Buffer Selection"

#: appEditors/AppGeoEditor.py:87
msgid "Buffer distance:"
msgstr "Buffer distance:"

#: appEditors/AppGeoEditor.py:88
msgid "Buffer corner:"
msgstr "Buffer corner:"

#: appEditors/AppGeoEditor.py:90
msgid ""
"There are 3 types of corners:\n"
" - 'Round': the corner is rounded for exterior buffer.\n"
" - 'Square': the corner is met in a sharp angle for exterior buffer.\n"
" - 'Beveled': the corner is a line that directly connects the features "
"meeting in the corner"
msgstr ""
"There are 3 types of corners:\n"
" - 'Round': the corner is rounded for exterior buffer.\n"
" - 'Square': the corner is met in a sharp angle for exterior buffer.\n"
" - 'Beveled': the corner is a line that directly connects the features "
"meeting in the corner"

#: appEditors/AppGeoEditor.py:96 appEditors/AppGerberEditor.py:2721
msgid "Round"
msgstr "Round"

#: appEditors/AppGeoEditor.py:97 appEditors/AppGerberEditor.py:2722
#: appGUI/ObjectUI.py:1603
#: appGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:223
#: appGUI/preferences/tools/Tools2EDrillsPrefGroupUI.py:68
#: appGUI/preferences/tools/Tools2EDrillsPrefGroupUI.py:175
#: appGUI/preferences/tools/Tools2InvertPrefGroupUI.py:68
#: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:68
#: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:177
#: appGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:143
#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:424
#: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:308
#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:327
#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:289
#: appTools/ToolDrilling.py:2588 appTools/ToolExtractDrills.py:487
#: appTools/ToolExtractDrills.py:615 appTools/ToolInvertGerber.py:254
#: appTools/ToolIsolation.py:3535 appTools/ToolMilling.py:2264
#: appTools/ToolNCC.py:4456 appTools/ToolPaint.py:3157
#: appTools/ToolPunchGerber.py:1060 appTools/ToolPunchGerber.py:1227
#: appTools/ToolQRCode.py:795
msgid "Square"
msgstr "Square"

#: appEditors/AppGeoEditor.py:98 appEditors/AppGerberEditor.py:2723
msgid "Beveled"
msgstr "Beveled"

#: appEditors/AppGeoEditor.py:105
msgid "Buffer Interior"
msgstr "Buffer Interior"

#: appEditors/AppGeoEditor.py:107
msgid "Buffer Exterior"
msgstr "Buffer Exterior"

#: appEditors/AppGeoEditor.py:113
msgid "Full Buffer"
msgstr "Full Buffer"

#: appEditors/AppGeoEditor.py:134 appEditors/AppGeoEditor.py:2969
#: appGUI/MainGUI.py:687 appGUI/MainGUI.py:4682
#: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:191
msgid "Buffer Tool"
msgstr "Buffer Tool"

#: appEditors/AppGeoEditor.py:146 appEditors/AppGeoEditor.py:163
#: appEditors/AppGeoEditor.py:180 appEditors/AppGeoEditor.py:2988
#: appEditors/AppGeoEditor.py:3016 appEditors/AppGeoEditor.py:3044
#: appEditors/AppGerberEditor.py:5189
msgid "Buffer distance value is missing or wrong format. Add it and retry."
msgstr "Buffer distance value is missing or wrong format. Add it and retry."

#: appEditors/AppGeoEditor.py:197
msgid "Text Input Tool"
msgstr "Text Input Tool"

#: appEditors/AppGeoEditor.py:244
msgid "Font"
msgstr "Font"

#: appEditors/AppGeoEditor.py:316 appEditors/AppGerberEditor.py:2578
#: appEditors/AppGerberEditor.py:4034 appGUI/ObjectUI.py:316
#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:103
#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:180
#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:209
#: appGUI/preferences/tools/Tools2FiducialsPrefGroupUI.py:43
#: appTools/ToolCopperThieving.py:1458 appTools/ToolCopperThieving.py:1498
#: appTools/ToolFiducials.py:799 appTools/ToolPunchGerber.py:1088
msgid "Size"
msgstr "Size"

#: appEditors/AppGeoEditor.py:325 appGUI/MainGUI.py:1617
msgid "Text"
msgstr "Text"

#: appEditors/AppGeoEditor.py:331 appGUI/MainGUI.py:1537
msgid "Apply"
msgstr "Apply"

#: appEditors/AppGeoEditor.py:351
msgid "Text Tool"
msgstr "Text Tool"

#: appEditors/AppGeoEditor.py:407 appGUI/MainGUI.py:576 appGUI/MainGUI.py:1360
#: appGUI/ObjectUI.py:1161 appObjects/FlatCAMExcellon.py:883
#: appObjects/FlatCAMGeometry.py:962 appTools/ToolDrilling.py:711
#: appTools/ToolDrilling.py:1033 appTools/ToolDrilling.py:2116
#: appTools/ToolIsolation.py:698 appTools/ToolIsolation.py:3271
#: appTools/ToolMilling.py:790 appTools/ToolMilling.py:1046
#: appTools/ToolMilling.py:1711 appTools/ToolNCC.py:329
#: appTools/ToolNCC.py:2383 appTools/ToolNCC.py:4153 appTools/ToolPaint.py:302
#: appTools/ToolPaint.py:2958 app_Main.py:2088 app_Main.py:2515
#: app_Main.py:2621
msgid "Tool"
msgstr "Tool"

#: appEditors/AppGeoEditor.py:415 appEditors/AppGeoEditor.py:549
#: appGUI/MainGUI.py:691 appGUI/MainGUI.py:1050 appGUI/MainGUI.py:2219
#: appGUI/ObjectUI.py:1808 appTools/ToolPaint.py:226 appTools/ToolPaint.py:2748
msgid "Paint Tool"
msgstr "Paint Tool"

#: appEditors/AppGeoEditor.py:441
msgid "Tool dia"
msgstr "Tool dia"

#: appEditors/AppGeoEditor.py:443
msgid "Diameter of the tool to be used in the operation."
msgstr "Diameter of the tool to be used in the operation."

#: appEditors/AppGeoEditor.py:489
msgid ""
"Algorithm to paint the polygons:\n"
"- Standard: Fixed step inwards.\n"
"- Seed-based: Outwards from seed.\n"
"- Line-based: Parallel lines."
msgstr ""
"Algorithm to paint the polygons:\n"
"- Standard: Fixed step inwards.\n"
"- Seed-based: Outwards from seed.\n"
"- Line-based: Parallel lines."

#: appEditors/AppGeoEditor.py:585 appEditors/AppGeoEditor.py:1074
#: appEditors/AppGeoEditor.py:2976 appEditors/AppGeoEditor.py:3004
#: appEditors/AppGeoEditor.py:3032 appEditors/AppGeoEditor.py:4413
#: appEditors/AppGerberEditor.py:5844
msgid "Cancelled. No shape selected."
msgstr "Cancelled. No shape selected."

#: appEditors/AppGeoEditor.py:598 appEditors/AppGeoEditor.py:2994
#: appEditors/AppGeoEditor.py:3022 appEditors/AppGeoEditor.py:3050
#: appGUI/preferences/geometry/GeometryGenPrefGroupUI.py:71
#: appObjects/FlatCAMObj.py:495 appTools/ToolProperties.py:113
#: appTools/ToolProperties.py:161
msgid "Tools"
msgstr "Tools"

#: appEditors/AppGeoEditor.py:609 appEditors/AppGeoEditor.py:1038
#: appEditors/AppGerberEditor.py:5379 appEditors/AppGerberEditor.py:5808
#: appGUI/MainGUI.py:695 appGUI/MainGUI.py:1075 appGUI/MainGUI.py:2244
#: appTools/ToolTransform.py:85
msgid "Transform Tool"
msgstr "Transform Tool"

#: appEditors/AppGeoEditor.py:610 appEditors/AppGeoEditor.py:702
#: appEditors/AppGerberEditor.py:5380 appEditors/AppGerberEditor.py:5472
#: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:88
#: appTools/ToolTransform.py:513 appTools/ToolTransform.py:633
msgid "Rotate"
msgstr "Rotate"

#: appEditors/AppGeoEditor.py:611 appEditors/AppGerberEditor.py:5381
#: appTools/ToolTransform.py:514
msgid "Skew/Shear"
msgstr "Skew/Shear"

#: appEditors/AppGeoEditor.py:612 appEditors/AppGerberEditor.py:2770
#: appEditors/AppGerberEditor.py:5382 appGUI/MainGUI.py:776
#: appGUI/MainGUI.py:1197 appGUI/MainGUI.py:1664 appGUI/MainGUI.py:2366
#: appGUI/MainGUI.py:4935 appGUI/ObjectUI.py:125
#: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:147
#: appTools/ToolTransform.py:515
msgid "Scale"
msgstr "Scale"

#: appEditors/AppGeoEditor.py:613 appEditors/AppGerberEditor.py:5383
#: appTools/ToolTransform.py:516
msgid "Mirror (Flip)"
msgstr "Mirror (Flip)"

#: appEditors/AppGeoEditor.py:615 appEditors/AppGerberEditor.py:2730
#: appEditors/AppGerberEditor.py:5385 appGUI/MainGUI.py:773
#: appGUI/MainGUI.py:1195 appGUI/MainGUI.py:1619 appGUI/MainGUI.py:1662
#: appGUI/MainGUI.py:2364 appGUI/MainGUI.py:4926
#: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:212
#: appTools/ToolTransform.py:518
msgid "Buffer"
msgstr "Buffer"

#: appEditors/AppGeoEditor.py:646 appEditors/AppGerberEditor.py:5416
#: appGUI/GUIElements.py:3674
#: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:169
#: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:44
#: appTools/ToolDblSided.py:684 appTools/ToolDblSided.py:860
#: appTools/ToolFilm.py:1064 appTools/ToolTransform.py:547
msgid "Reference"
msgstr "Reference"

#: appEditors/AppGeoEditor.py:648 appEditors/AppGerberEditor.py:5418
msgid ""
"The reference point for Rotate, Skew, Scale, Mirror.\n"
"Can be:\n"
"- Origin -> it is the 0, 0 point\n"
"- Selection -> the center of the bounding box of the selected objects\n"
"- Point -> a custom point defined by X,Y coordinates\n"
"- Min Selection -> the point (minx, miny) of the bounding box of the "
"selection"
msgstr ""
"The reference point for Rotate, Skew, Scale, Mirror.\n"
"Can be:\n"
"- Origin -> it is the 0, 0 point\n"
"- Selection -> the center of the bounding box of the selected objects\n"
"- Point -> a custom point defined by X,Y coordinates\n"
"- Min Selection -> the point (minx, miny) of the bounding box of the "
"selection"

#: appEditors/AppGeoEditor.py:656 appEditors/AppGerberEditor.py:5426
#: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:54
#: appTools/ToolCalibration.py:126 appTools/ToolCalibration.py:127
#: appTools/ToolTransform.py:557
msgid "Origin"
msgstr "Origin"

#: appEditors/AppGeoEditor.py:656 appEditors/AppGeoEditor.py:1047
#: appEditors/AppGerberEditor.py:5426 appEditors/AppGerberEditor.py:5817
#: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:250
#: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:285
#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:311
#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:256
#: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:54
#: appTools/ToolIsolation.py:3473 appTools/ToolNCC.py:4412
#: appTools/ToolPaint.py:3104 appTools/ToolTransform.py:557 defaults.py:572
msgid "Selection"
msgstr "Selection"

#: appEditors/AppGeoEditor.py:656 appEditors/AppGerberEditor.py:5426
#: appGUI/preferences/tools/Tools2sidedPrefGroupUI.py:85
#: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:54
#: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:60
#: appTools/ToolDblSided.py:695 appTools/ToolTransform.py:557
msgid "Point"
msgstr "Point"

#: appEditors/AppGeoEditor.py:656 appEditors/AppGerberEditor.py:5426
msgid "Minimum"
msgstr "Minimum"

#: appEditors/AppGeoEditor.py:662 appEditors/AppGeoEditor.py:958
#: appEditors/AppGerberEditor.py:5432 appEditors/AppGerberEditor.py:5728
#: appGUI/preferences/tools/Tools2EDrillsPrefGroupUI.py:131
#: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:133
#: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:243
#: appTools/ToolExtractDrills.py:557 appTools/ToolExtractDrills.py:668
#: appTools/ToolPunchGerber.py:1166 appTools/ToolPunchGerber.py:1276
#: appTools/ToolTransform.py:563 appTools/ToolTransform.py:889 app_Main.py:8036
msgid "Value"
msgstr "Value"

#: appEditors/AppGeoEditor.py:664 appEditors/AppGerberEditor.py:5434
#: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:62
#: appTools/ToolTransform.py:565
msgid "A point of reference in format X,Y."
msgstr "A point of reference in format X,Y."

#: appEditors/AppGeoEditor.py:671 appEditors/AppGerberEditor.py:2673
#: appEditors/AppGerberEditor.py:5441 appGUI/ObjectUI.py:2375
#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:288
#: appTools/ToolCopperThieving.py:1666 appTools/ToolDblSided.py:709
#: appTools/ToolDblSided.py:897 appTools/ToolNCC.py:63
#: appTools/ToolPaint.py:137 appTools/ToolSolderPaste.py:160
#: appTools/ToolSolderPaste.py:1204 appTools/ToolTransform.py:572
#: app_Main.py:6294
msgid "Add"
msgstr "Add"

#: appEditors/AppGeoEditor.py:673 appEditors/AppGerberEditor.py:5443
#: appTools/ToolTransform.py:574
msgid "Add point coordinates from clipboard."
msgstr "Add point coordinates from clipboard."

#: appEditors/AppGeoEditor.py:688 appEditors/AppGerberEditor.py:5458
#: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:98
#: appTools/ToolTransform.py:619
msgid ""
"Angle for Rotation action, in degrees.\n"
"Float number between -360 and 359.\n"
"Positive numbers for CW motion.\n"
"Negative numbers for CCW motion."
msgstr ""
"Angle for Rotation action, in degrees.\n"
"Float number between -360 and 359.\n"
"Positive numbers for CW motion.\n"
"Negative numbers for CCW motion."

#: appEditors/AppGeoEditor.py:704 appEditors/AppGerberEditor.py:5474
#: appTools/ToolTransform.py:635
msgid ""
"Rotate the selected object(s).\n"
"The point of reference is the middle of\n"
"the bounding box for all selected objects."
msgstr ""
"Rotate the selected object(s).\n"
"The point of reference is the middle of\n"
"the bounding box for all selected objects."

#: appEditors/AppGeoEditor.py:724 appEditors/AppGeoEditor.py:786
#: appEditors/AppGerberEditor.py:5494 appEditors/AppGerberEditor.py:5556
#: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:112
#: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:151
#: appTools/ToolTransform.py:655 appTools/ToolTransform.py:717
msgid "Link"
msgstr "Link"

#: appEditors/AppGeoEditor.py:726 appEditors/AppGeoEditor.py:788
#: appEditors/AppGerberEditor.py:5496 appEditors/AppGerberEditor.py:5558
#: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:114
#: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:153
#: appTools/ToolTransform.py:657 appTools/ToolTransform.py:719
msgid "Link the Y entry to X entry and copy its content."
msgstr "Link the Y entry to X entry and copy its content."

#: appEditors/AppGeoEditor.py:731 appEditors/AppGerberEditor.py:5501
#: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:151
#: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:124
#: appTools/ToolFilm.py:1046 appTools/ToolTransform.py:662
msgid "X angle"
msgstr "X angle"

#: appEditors/AppGeoEditor.py:733 appEditors/AppGeoEditor.py:754
#: appEditors/AppGerberEditor.py:5503 appEditors/AppGerberEditor.py:5524
#: appTools/ToolTransform.py:664 appTools/ToolTransform.py:685
msgid ""
"Angle for Skew action, in degrees.\n"
"Float number between -360 and 360."
msgstr ""
"Angle for Skew action, in degrees.\n"
"Float number between -360 and 360."

#: appEditors/AppGeoEditor.py:741 appEditors/AppGerberEditor.py:5511
#: appTools/ToolTransform.py:672
msgid "Skew X"
msgstr "Skew X"

#: appEditors/AppGeoEditor.py:743 appEditors/AppGeoEditor.py:764
#: appEditors/AppGerberEditor.py:5513 appEditors/AppGerberEditor.py:5534
#: appTools/ToolTransform.py:674 appTools/ToolTransform.py:695
msgid ""
"Skew/shear the selected object(s).\n"
"The point of reference is the middle of\n"
"the bounding box for all selected objects."
msgstr ""
"Skew/shear the selected object(s).\n"
"The point of reference is the middle of\n"
"the bounding box for all selected objects."

#: appEditors/AppGeoEditor.py:752 appEditors/AppGerberEditor.py:5522
#: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:160
#: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:138
#: appTools/ToolFilm.py:1055 appTools/ToolTransform.py:683
msgid "Y angle"
msgstr "Y angle"

#: appEditors/AppGeoEditor.py:762 appEditors/AppGerberEditor.py:5532
#: appTools/ToolTransform.py:693
msgid "Skew Y"
msgstr "Skew Y"

#: appEditors/AppGeoEditor.py:793 appEditors/AppGerberEditor.py:5563
#: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:120
#: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:162
#: appTools/ToolFilm.py:1002 appTools/ToolTransform.py:724
msgid "X factor"
msgstr "X factor"

#: appEditors/AppGeoEditor.py:795 appEditors/AppGerberEditor.py:5565
#: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:164
#: appTools/ToolTransform.py:726
msgid "Factor for scaling on X axis."
msgstr "Factor for scaling on X axis."

#: appEditors/AppGeoEditor.py:802 appEditors/AppGerberEditor.py:5572
#: appTools/ToolTransform.py:733
msgid "Scale X"
msgstr "Scale X"

#: appEditors/AppGeoEditor.py:804 appEditors/AppGeoEditor.py:824
#: appEditors/AppGerberEditor.py:5574 appEditors/AppGerberEditor.py:5594
#: appTools/ToolTransform.py:735 appTools/ToolTransform.py:755
msgid ""
"Scale the selected object(s).\n"
"The point of reference depends on \n"
"the Scale reference checkbox state."
msgstr ""
"Scale the selected object(s).\n"
"The point of reference depends on \n"
"the Scale reference checkbox state."

#: appEditors/AppGeoEditor.py:813 appEditors/AppGerberEditor.py:5583
#: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:129
#: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:175
#: appTools/ToolFilm.py:1011 appTools/ToolTransform.py:744
msgid "Y factor"
msgstr "Y factor"

#: appEditors/AppGeoEditor.py:815 appEditors/AppGerberEditor.py:5585
#: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:177
#: appTools/ToolTransform.py:746
msgid "Factor for scaling on Y axis."
msgstr "Factor for scaling on Y axis."

#: appEditors/AppGeoEditor.py:822 appEditors/AppGerberEditor.py:5592
#: appTools/ToolTransform.py:753
msgid "Scale Y"
msgstr "Scale Y"

#: appEditors/AppGeoEditor.py:849 appEditors/AppGerberEditor.py:5619
#: appTools/ToolTransform.py:780
msgid "Flip on X"
msgstr "Flip on X"

#: appEditors/AppGeoEditor.py:851 appEditors/AppGeoEditor.py:856
#: appEditors/AppGerberEditor.py:5621 appEditors/AppGerberEditor.py:5626
#: appTools/ToolTransform.py:782 appTools/ToolTransform.py:787
msgid "Flip the selected object(s) over the X axis."
msgstr "Flip the selected object(s) over the X axis."

#: appEditors/AppGeoEditor.py:854 appEditors/AppGerberEditor.py:5624
#: appTools/ToolTransform.py:785
msgid "Flip on Y"
msgstr "Flip on Y"

#: appEditors/AppGeoEditor.py:874 appEditors/AppGerberEditor.py:5644
#: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:191
#: appTools/ToolTransform.py:805
msgid "X val"
msgstr "X val"

#: appEditors/AppGeoEditor.py:876 appEditors/AppGerberEditor.py:5646
#: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:193
#: appTools/ToolTransform.py:807
msgid "Distance to offset on X axis. In current units."
msgstr "Distance to offset on X axis. In current units."

#: appEditors/AppGeoEditor.py:883 appEditors/AppGerberEditor.py:5653
#: appTools/ToolTransform.py:814
msgid "Offset X"
msgstr "Offset X"

#: appEditors/AppGeoEditor.py:885 appEditors/AppGeoEditor.py:905
#: appEditors/AppGerberEditor.py:5655 appEditors/AppGerberEditor.py:5675
#: appTools/ToolTransform.py:816 appTools/ToolTransform.py:836
msgid ""
"Offset the selected object(s).\n"
"The point of reference is the middle of\n"
"the bounding box for all selected objects.\n"
msgstr ""
"Offset the selected object(s).\n"
"The point of reference is the middle of\n"
"the bounding box for all selected objects.\n"

#: appEditors/AppGeoEditor.py:894 appEditors/AppGerberEditor.py:5664
#: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:204
#: appTools/ToolTransform.py:825
msgid "Y val"
msgstr "Y val"

#: appEditors/AppGeoEditor.py:896 appEditors/AppGerberEditor.py:5666
#: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:206
#: appTools/ToolTransform.py:827
msgid "Distance to offset on Y axis. In current units."
msgstr "Distance to offset on Y axis. In current units."

#: appEditors/AppGeoEditor.py:903 appEditors/AppGerberEditor.py:5673
#: appTools/ToolTransform.py:834
msgid "Offset Y"
msgstr "Offset Y"

#: appEditors/AppGeoEditor.py:923 appEditors/AppGerberEditor.py:5693
#: appGUI/ObjectUI.py:462 appGUI/ObjectUI.py:499
#: appGUI/preferences/tools/Tools2InvertPrefGroupUI.py:67
#: appGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:142
#: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:216
#: appTools/ToolInvertGerber.py:253 appTools/ToolQRCode.py:794
#: appTools/ToolTransform.py:854
msgid "Rounded"
msgstr "Rounded"

#: appEditors/AppGeoEditor.py:925 appEditors/AppGerberEditor.py:5695
#: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:218
#: appTools/ToolTransform.py:856
msgid ""
"If checked then the buffer will surround the buffered shape,\n"
"every corner will be rounded.\n"
"If not checked then the buffer will follow the exact geometry\n"
"of the buffered shape."
msgstr ""
"If checked then the buffer will surround the buffered shape,\n"
"every corner will be rounded.\n"
"If not checked then the buffer will follow the exact geometry\n"
"of the buffered shape."

#: appEditors/AppGeoEditor.py:933 appEditors/AppGerberEditor.py:5703
#: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:226
#: appTools/ToolDistance.py:409 appTools/ToolDistanceMin.py:199
#: appTools/ToolTransform.py:864
msgid "Distance"
msgstr "Distance"

#: appEditors/AppGeoEditor.py:935 appEditors/AppGerberEditor.py:5705
#: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:228
#: appTools/ToolTransform.py:866
msgid ""
"A positive value will create the effect of dilation,\n"
"while a negative value will create the effect of erosion.\n"
"Each geometry element of the object will be increased\n"
"or decreased with the 'distance'."
msgstr ""
"A positive value will create the effect of dilation,\n"
"while a negative value will create the effect of erosion.\n"
"Each geometry element of the object will be increased\n"
"or decreased with the 'distance'."

#: appEditors/AppGeoEditor.py:947 appEditors/AppGerberEditor.py:5717
#: appTools/ToolTransform.py:878
msgid "Buffer D"
msgstr "Buffer D"

#: appEditors/AppGeoEditor.py:949 appEditors/AppGerberEditor.py:5719
#: appTools/ToolTransform.py:880
msgid ""
"Create the buffer effect on each geometry,\n"
"element from the selected object, using the distance."
msgstr ""
"Create the buffer effect on each geometry,\n"
"element from the selected object, using the distance."

#: appEditors/AppGeoEditor.py:960 appEditors/AppGerberEditor.py:5730
#: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:245
#: appTools/ToolTransform.py:891
msgid ""
"A positive value will create the effect of dilation,\n"
"while a negative value will create the effect of erosion.\n"
"Each geometry element of the object will be increased\n"
"or decreased to fit the 'Value'. Value is a percentage\n"
"of the initial dimension."
msgstr ""
"A positive value will create the effect of dilation,\n"
"while a negative value will create the effect of erosion.\n"
"Each geometry element of the object will be increased\n"
"or decreased to fit the 'Value'. Value is a percentage\n"
"of the initial dimension."

#: appEditors/AppGeoEditor.py:973 appEditors/AppGerberEditor.py:5743
#: appTools/ToolTransform.py:904
msgid "Buffer F"
msgstr "Buffer F"

#: appEditors/AppGeoEditor.py:975 appEditors/AppGerberEditor.py:5745
#: appTools/ToolTransform.py:906
msgid ""
"Create the buffer effect on each geometry,\n"
"element from the selected object, using the factor."
msgstr ""
"Create the buffer effect on each geometry,\n"
"element from the selected object, using the factor."

#: appEditors/AppGeoEditor.py:1046 appEditors/AppGerberEditor.py:5816
#: appGUI/ObjectUI.py:1557 appGUI/preferences/tools/Tools2CalPrefGroupUI.py:48
#: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:54
#: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:70
#: appTools/ToolCalibration.py:881 appTools/ToolDrilling.py:2540
#: appTools/ToolFilm.py:935 appTools/ToolMilling.py:2218
#: appTools/ToolNCC.py:3975 appTools/ToolPaint.py:2806
#: appTools/ToolPanelize.py:698 appTools/ToolTransform.py:557
msgid "Object"
msgstr "Object"

#: appEditors/AppGeoEditor.py:1110 appEditors/AppGeoEditor.py:1133
#: appEditors/AppGeoEditor.py:1279 appEditors/AppGeoEditor.py:1304
#: appEditors/AppGeoEditor.py:1339 appEditors/AppGeoEditor.py:1374
#: appEditors/AppGeoEditor.py:1405 appEditors/AppGerberEditor.py:5880
#: appEditors/AppGerberEditor.py:5903 appEditors/AppGerberEditor.py:6048
#: appEditors/AppGerberEditor.py:6081 appEditors/AppGerberEditor.py:6124
#: appEditors/AppGerberEditor.py:6165 appEditors/AppGerberEditor.py:6201
msgid "No shape selected."
msgstr "No shape selected."

#: appEditors/AppGeoEditor.py:1118 appEditors/AppGerberEditor.py:5888
#: appTools/ToolTransform.py:150
msgid "Incorrect format for Point value. Needs format X,Y"
msgstr "Incorrect format for Point value. Needs format X,Y"

#: appEditors/AppGeoEditor.py:1143 appEditors/AppGerberEditor.py:5913
#: appTools/ToolTransform.py:167
msgid "Rotate transformation can not be done for a value of 0."
msgstr "Rotate transformation can not be done for a value of 0."

#: appEditors/AppGeoEditor.py:1201 appEditors/AppGeoEditor.py:1222
#: appEditors/AppGerberEditor.py:5971 appEditors/AppGerberEditor.py:5992
#: appTools/ToolTransform.py:225 appTools/ToolTransform.py:246
msgid "Scale transformation can not be done for a factor of 0 or 1."
msgstr "Scale transformation can not be done for a factor of 0 or 1."

#: appEditors/AppGeoEditor.py:1235 appEditors/AppGeoEditor.py:1244
#: appEditors/AppGerberEditor.py:6005 appEditors/AppGerberEditor.py:6014
#: appTools/ToolTransform.py:259 appTools/ToolTransform.py:268
msgid "Offset transformation can not be done for a value of 0."
msgstr "Offset transformation can not be done for a value of 0."

#: appEditors/AppGeoEditor.py:1274 appEditors/AppGerberEditor.py:6051
#: appTools/ToolTransform.py:296
msgid "Appying Rotate"
msgstr "Appying Rotate"

#: appEditors/AppGeoEditor.py:1287 appEditors/AppGerberEditor.py:6063
msgid "Done. Rotate completed."
msgstr "Done. Rotate completed."

#: appEditors/AppGeoEditor.py:1289
msgid "Rotation action was not executed"
msgstr "Rotation action was not executed"

#: appEditors/AppGeoEditor.py:1307 appEditors/AppGerberEditor.py:6084
#: appTools/ToolTransform.py:322
msgid "Applying Flip"
msgstr "Applying Flip"

#: appEditors/AppGeoEditor.py:1315 appEditors/AppGerberEditor.py:6096
#: appTools/ToolTransform.py:339
msgid "Flip on the Y axis done"
msgstr "Flip on the Y axis done"

#: appEditors/AppGeoEditor.py:1318 appEditors/AppGerberEditor.py:6104
#: appTools/ToolTransform.py:348
msgid "Flip on the X axis done"
msgstr "Flip on the X axis done"

#: appEditors/AppGeoEditor.py:1322
msgid "Flip action was not executed"
msgstr "Flip action was not executed"

#: appEditors/AppGeoEditor.py:1342 appEditors/AppGerberEditor.py:6127
#: appTools/ToolTransform.py:369
msgid "Applying Skew"
msgstr "Applying Skew"

#: appEditors/AppGeoEditor.py:1351 appEditors/AppGerberEditor.py:6143
msgid "Skew on the X axis done"
msgstr "Skew on the X axis done"

#: appEditors/AppGeoEditor.py:1353 appEditors/AppGerberEditor.py:6145
msgid "Skew on the Y axis done"
msgstr "Skew on the Y axis done"

#: appEditors/AppGeoEditor.py:1356
msgid "Skew action was not executed"
msgstr "Skew action was not executed"

#: appEditors/AppGeoEditor.py:1377 appEditors/AppGerberEditor.py:6168
#: appTools/ToolTransform.py:396
msgid "Applying Scale"
msgstr "Applying Scale"

#: appEditors/AppGeoEditor.py:1386 appEditors/AppGerberEditor.py:6181
msgid "Scale on the X axis done"
msgstr "Scale on the X axis done"

#: appEditors/AppGeoEditor.py:1388 appEditors/AppGerberEditor.py:6183
msgid "Scale on the Y axis done"
msgstr "Scale on the Y axis done"

#: appEditors/AppGeoEditor.py:1390
msgid "Scale action was not executed"
msgstr "Scale action was not executed"

#: appEditors/AppGeoEditor.py:1408 appEditors/AppGerberEditor.py:6204
#: appTools/ToolTransform.py:424
msgid "Applying Offset"
msgstr "Applying Offset"

#: appEditors/AppGeoEditor.py:1418 appEditors/AppGerberEditor.py:6225
msgid "Offset on the X axis done"
msgstr "Offset on the X axis done"

#: appEditors/AppGeoEditor.py:1420 appEditors/AppGerberEditor.py:6227
msgid "Offset on the Y axis done"
msgstr "Offset on the Y axis done"

#: appEditors/AppGeoEditor.py:1423
msgid "Offset action was not executed"
msgstr "Offset action was not executed"

#: appEditors/AppGeoEditor.py:1430 appEditors/AppGerberEditor.py:6237
msgid "No shape selected"
msgstr "No shape selected"

#: appEditors/AppGeoEditor.py:1433 appEditors/AppGerberEditor.py:6240
#: appTools/ToolTransform.py:453
msgid "Applying Buffer"
msgstr "Applying Buffer"

#: appEditors/AppGeoEditor.py:1440 appEditors/AppGerberEditor.py:6262
#: appTools/ToolTransform.py:474
msgid "Buffer done"
msgstr "Buffer done"

#: appEditors/AppGeoEditor.py:1444 appEditors/AppGerberEditor.py:6266
#: appTools/ToolTransform.py:443 appTools/ToolTransform.py:478
msgid "Action was not executed, due of"
msgstr "Action was not executed, due of"

#: appEditors/AppGeoEditor.py:1448 appEditors/AppGerberEditor.py:6270
msgid "Rotate ..."
msgstr "Rotate ..."

#: appEditors/AppGeoEditor.py:1449 appEditors/AppGeoEditor.py:1501
#: appEditors/AppGeoEditor.py:1517 appEditors/AppGerberEditor.py:6271
#: appEditors/AppGerberEditor.py:6323 appEditors/AppGerberEditor.py:6339
msgid "Enter an Angle Value (degrees)"
msgstr "Enter an Angle Value (degrees)"

#: appEditors/AppGeoEditor.py:1458 appEditors/AppGerberEditor.py:6280
msgid "Geometry shape rotate done"
msgstr "Geometry shape rotate done"

#: appEditors/AppGeoEditor.py:1461 appEditors/AppGerberEditor.py:6283
msgid "Geometry shape rotate cancelled"
msgstr "Geometry shape rotate cancelled"

#: appEditors/AppGeoEditor.py:1466 appEditors/AppGerberEditor.py:6288
msgid "Offset on X axis ..."
msgstr "Offset on X axis ..."

#: appEditors/AppGeoEditor.py:1467 appEditors/AppGeoEditor.py:1485
#: appEditors/AppGerberEditor.py:6289 appEditors/AppGerberEditor.py:6307
msgid "Enter a distance Value"
msgstr "Enter a distance Value"

#: appEditors/AppGeoEditor.py:1476 appEditors/AppGerberEditor.py:6298
msgid "Geometry shape offset on X axis done"
msgstr "Geometry shape offset on X axis done"

#: appEditors/AppGeoEditor.py:1479 appEditors/AppGerberEditor.py:6301
msgid "Geometry shape offset X cancelled"
msgstr "Geometry shape offset X cancelled"

#: appEditors/AppGeoEditor.py:1484 appEditors/AppGerberEditor.py:6306
msgid "Offset on Y axis ..."
msgstr "Offset on Y axis ..."

#: appEditors/AppGeoEditor.py:1494 appEditors/AppGerberEditor.py:6316
msgid "Geometry shape offset on Y axis done"
msgstr "Geometry shape offset on Y axis done"

#: appEditors/AppGeoEditor.py:1497
msgid "Geometry shape offset on Y axis canceled"
msgstr "Geometry shape offset on Y axis canceled"

#: appEditors/AppGeoEditor.py:1500 appEditors/AppGerberEditor.py:6322
msgid "Skew on X axis ..."
msgstr "Skew on X axis ..."

#: appEditors/AppGeoEditor.py:1510 appEditors/AppGerberEditor.py:6332
msgid "Geometry shape skew on X axis done"
msgstr "Geometry shape skew on X axis done"

#: appEditors/AppGeoEditor.py:1513
msgid "Geometry shape skew on X axis canceled"
msgstr "Geometry shape skew on X axis canceled"

#: appEditors/AppGeoEditor.py:1516 appEditors/AppGerberEditor.py:6338
msgid "Skew on Y axis ..."
msgstr "Skew on Y axis ..."

#: appEditors/AppGeoEditor.py:1526 appEditors/AppGerberEditor.py:6348
msgid "Geometry shape skew on Y axis done"
msgstr "Geometry shape skew on Y axis done"

#: appEditors/AppGeoEditor.py:1529
msgid "Geometry shape skew on Y axis canceled"
msgstr "Geometry shape skew on Y axis canceled"

#: appEditors/AppGeoEditor.py:1960 appEditors/AppGeoEditor.py:2031
#: appEditors/AppGerberEditor.py:1483 appEditors/AppGerberEditor.py:1561
msgid "Click on Center point ..."
msgstr "Click on Center point ..."

#: appEditors/AppGeoEditor.py:1973 appEditors/AppGerberEditor.py:1493
msgid "Click on Perimeter point to complete ..."
msgstr "Click on Perimeter point to complete ..."

#: appEditors/AppGeoEditor.py:2005
msgid "Done. Adding Circle completed."
msgstr "Done. Adding Circle completed."

#: appEditors/AppGeoEditor.py:2059 appEditors/AppGerberEditor.py:1607
msgid "Click on Start point ..."
msgstr "Click on Start point ..."

#: appEditors/AppGeoEditor.py:2061 appEditors/AppGerberEditor.py:1609
msgid "Click on Point3 ..."
msgstr "Click on Point3 ..."

#: appEditors/AppGeoEditor.py:2063 appEditors/AppGerberEditor.py:1611
msgid "Click on Stop point ..."
msgstr "Click on Stop point ..."

#: appEditors/AppGeoEditor.py:2068 appEditors/AppGerberEditor.py:1616
msgid "Click on Stop point to complete ..."
msgstr "Click on Stop point to complete ..."

#: appEditors/AppGeoEditor.py:2070 appEditors/AppGerberEditor.py:1618
msgid "Click on Point2 to complete ..."
msgstr "Click on Point2 to complete ..."

#: appEditors/AppGeoEditor.py:2072 appEditors/AppGerberEditor.py:1620
msgid "Click on Center point to complete ..."
msgstr "Click on Center point to complete ..."

#: appEditors/AppGeoEditor.py:2084
#, python-format
msgid "Direction: %s"
msgstr "Direction: %s"

#: appEditors/AppGeoEditor.py:2098 appEditors/AppGerberEditor.py:1646
msgid "Mode: Start -> Stop -> Center. Click on Start point ..."
msgstr "Mode: Start -> Stop -> Center. Click on Start point ..."

#: appEditors/AppGeoEditor.py:2101 appEditors/AppGerberEditor.py:1649
msgid "Mode: Point1 -> Point3 -> Point2. Click on Point1 ..."
msgstr "Mode: Point1 -> Point3 -> Point2. Click on Point1 ..."

#: appEditors/AppGeoEditor.py:2104 appEditors/AppGerberEditor.py:1652
msgid "Mode: Center -> Start -> Stop. Click on Center point ..."
msgstr "Mode: Center -> Start -> Stop. Click on Center point ..."

#: appEditors/AppGeoEditor.py:2245
msgid "Done. Arc completed."
msgstr "Done. Arc completed."

#: appEditors/AppGeoEditor.py:2276 appEditors/AppGeoEditor.py:2349
msgid "Click on 1st corner ..."
msgstr "Click on 1st corner ..."

#: appEditors/AppGeoEditor.py:2288
msgid "Click on opposite corner to complete ..."
msgstr "Click on opposite corner to complete ..."

#: appEditors/AppGeoEditor.py:2318
msgid "Done. Rectangle completed."
msgstr "Done. Rectangle completed."

#: appEditors/AppGeoEditor.py:2393
msgid "Done. Polygon completed."
msgstr "Done. Polygon completed."

#: appEditors/AppGeoEditor.py:2407 appEditors/AppGeoEditor.py:2472
#: appEditors/AppGerberEditor.py:1114 appEditors/AppGerberEditor.py:1347
msgid "Backtracked one point ..."
msgstr "Backtracked one point ..."

#: appEditors/AppGeoEditor.py:2450
msgid "Done. Path completed."
msgstr "Done. Path completed."

#: appEditors/AppGeoEditor.py:2609
msgid "No shape selected. Select a shape to explode"
msgstr "No shape selected. Select a shape to explode"

#: appEditors/AppGeoEditor.py:2642
msgid "Done. Polygons exploded into lines."
msgstr "Done. Polygons exploded into lines."

#: appEditors/AppGeoEditor.py:2674
msgid "MOVE: No shape selected. Select a shape to move"
msgstr "MOVE: No shape selected. Select a shape to move"

#: appEditors/AppGeoEditor.py:2677 appEditors/AppGeoEditor.py:2697
msgid " MOVE: Click on reference point ..."
msgstr " MOVE: Click on reference point ..."

#: appEditors/AppGeoEditor.py:2682
msgid " Click on destination point ..."
msgstr " Click on destination point ..."

#: appEditors/AppGeoEditor.py:2712 appEditors/AppGerberEditor.py:2430
#: appEditors/AppGerberEditor.py:4435 appObjects/FlatCAMGeometry.py:2564
#: appTools/ToolOptimal.py:145 appTools/ToolPanelize.py:613
#: appTools/ToolProperties.py:195 appTools/ToolQRCode.py:167
#: appTools/ToolSolderPaste.py:670 appTools/ToolSolderPaste.py:959
#: appTools/ToolSub.py:197 app_Main.py:7923 tclCommands/TclCommandOpenSVG.py:77
#: tclCommands/TclCommandPanelize.py:291
msgid "Working ..."
msgstr "Working ..."

#: appEditors/AppGeoEditor.py:2722
msgid "Done. Geometry(s) Move completed."
msgstr "Done. Geometry(s) Move completed."

#: appEditors/AppGeoEditor.py:2855
msgid "Done. Geometry(s) Copy completed."
msgstr "Done. Geometry(s) Copy completed."

#: appEditors/AppGeoEditor.py:2886 appEditors/AppGerberEditor.py:911
msgid "Click on 1st point ..."
msgstr "Click on 1st point ..."

#: appEditors/AppGeoEditor.py:2910
msgid ""
"Font not supported. Only Regular, Bold, Italic and BoldItalic are supported. "
"Error"
msgstr ""
"Font not supported. Only Regular, Bold, Italic and BoldItalic are supported. "
"Error"

#: appEditors/AppGeoEditor.py:2918
msgid "No text to add."
msgstr "No text to add."

#: appEditors/AppGeoEditor.py:2928
msgid " Done. Adding Text completed."
msgstr " Done. Adding Text completed."

#: appEditors/AppGeoEditor.py:2965
msgid "Create buffer geometry ..."
msgstr "Create buffer geometry ..."

#: appEditors/AppGeoEditor.py:3000 appEditors/AppGerberEditor.py:5233
msgid "Done. Buffer Tool completed."
msgstr "Done. Buffer Tool completed."

#: appEditors/AppGeoEditor.py:3028
msgid "Done. Buffer Int Tool completed."
msgstr "Done. Buffer Int Tool completed."

#: appEditors/AppGeoEditor.py:3056
msgid "Done. Buffer Ext Tool completed."
msgstr "Done. Buffer Ext Tool completed."

#: appEditors/AppGeoEditor.py:3105 appEditors/AppGerberEditor.py:2211
msgid "Select a shape to act as deletion area ..."
msgstr "Select a shape to act as deletion area ..."

#: appEditors/AppGeoEditor.py:3107 appEditors/AppGeoEditor.py:3133
#: appEditors/AppGeoEditor.py:3139 appEditors/AppGerberEditor.py:2213
msgid "Click to pick-up the erase shape..."
msgstr "Click to pick-up the erase shape..."

#: appEditors/AppGeoEditor.py:3143 appEditors/AppGerberEditor.py:2272
msgid "Click to erase ..."
msgstr "Click to erase ..."

#: appEditors/AppGeoEditor.py:3172 appEditors/AppGerberEditor.py:2305
msgid "Done. Eraser tool action completed."
msgstr "Done. Eraser tool action completed."

#: appEditors/AppGeoEditor.py:3222
msgid "Create Paint geometry ..."
msgstr "Create Paint geometry ..."

#: appEditors/AppGeoEditor.py:3235 appEditors/AppGerberEditor.py:2497
msgid "Shape transformations ..."
msgstr "Shape transformations ..."

#: appEditors/AppGeoEditor.py:3291 appGUI/ObjectUI.py:901
#: appGUI/preferences/geometry/GeometryEditorPrefGroupUI.py:27
msgid "Geometry Editor"
msgstr "Geometry Editor"

#: appEditors/AppGeoEditor.py:3297 appEditors/AppGerberEditor.py:2578
#: appEditors/AppGerberEditor.py:4034 appEditors/appGCodeEditor.py:687
#: appGUI/ObjectUI.py:316 appGUI/ObjectUI.py:999 appGUI/ObjectUI.py:2034
#: appGUI/preferences/tools/ToolsCornersPrefGroupUI.py:42
#: appTools/ToolCorners.py:546 appTools/ToolCutOut.py:2030
#: appTools/ToolDblSided.py:522 appTools/ToolPunchGerber.py:1088
#: appTools/ToolTransform.py:579
msgid "Type"
msgstr "Type"

#: appEditors/AppGeoEditor.py:3585
msgid "Ring"
msgstr "Ring"

#: appEditors/AppGeoEditor.py:3587
msgid "Line"
msgstr "Line"

#: appEditors/AppGeoEditor.py:3589 appGUI/MainGUI.py:1611
#: appGUI/ObjectUI.py:1604
#: appGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:224
#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:425
#: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:309
#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:328
#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:290
#: appTools/ToolDrilling.py:2589 appTools/ToolIsolation.py:3536
#: appTools/ToolMilling.py:2265 appTools/ToolNCC.py:4457
#: appTools/ToolPaint.py:3158
msgid "Polygon"
msgstr "Polygon"

#: appEditors/AppGeoEditor.py:3591
msgid "Multi-Line"
msgstr "Multi-Line"

#: appEditors/AppGeoEditor.py:3593
msgid "Multi-Polygon"
msgstr "Multi-Polygon"

#: appEditors/AppGeoEditor.py:3600
msgid "Geo Elem"
msgstr "Geo Elem"

#: appEditors/AppGeoEditor.py:4050
msgid "Grid Snap enabled."
msgstr "Grid Snap enabled."

#: appEditors/AppGeoEditor.py:4055
msgid "Grid Snap disabled."
msgstr "Grid Snap disabled."

#: appEditors/AppGeoEditor.py:4420 appGUI/MainGUI.py:3331
#: appGUI/MainGUI.py:3377 appGUI/MainGUI.py:3395 appGUI/MainGUI.py:3539
#: appGUI/MainGUI.py:3578 appGUI/MainGUI.py:3590
msgid "Click on target point."
msgstr "Click on target point."

#: appEditors/AppGeoEditor.py:4702
msgid "Editing MultiGeo Geometry, tool"
msgstr "Editing MultiGeo Geometry, tool"

#: appEditors/AppGeoEditor.py:4704 appTools/ToolNCC.py:2385
msgid "with diameter"
msgstr "with diameter"

#: appEditors/AppGeoEditor.py:4807 appEditors/AppGeoEditor.py:4842
msgid "A selection of at least 2 geo items is required to do Intersection."
msgstr "A selection of at least 2 geo items is required to do Intersection."

#: appEditors/AppGeoEditor.py:4928 appEditors/AppGeoEditor.py:5032
msgid ""
"Negative buffer value is not accepted. Use Buffer interior to generate an "
"'inside' shape"
msgstr ""
"Negative buffer value is not accepted. Use Buffer interior to generate an "
"'inside' shape"

#: appEditors/AppGeoEditor.py:4938 appEditors/AppGeoEditor.py:4991
#: appEditors/AppGeoEditor.py:5041
msgid "Nothing selected for buffering."
msgstr "Nothing selected for buffering."

#: appEditors/AppGeoEditor.py:4943 appEditors/AppGeoEditor.py:4995
#: appEditors/AppGeoEditor.py:5046
msgid "Invalid distance for buffering."
msgstr "Invalid distance for buffering."

#: appEditors/AppGeoEditor.py:4967 appEditors/AppGeoEditor.py:5066
msgid "Failed, the result is empty. Choose a different buffer value."
msgstr "Failed, the result is empty. Choose a different buffer value."

#: appEditors/AppGeoEditor.py:4978
msgid "Full buffer geometry created."
msgstr "Full buffer geometry created."

#: appEditors/AppGeoEditor.py:4984
msgid "Negative buffer value is not accepted."
msgstr "Negative buffer value is not accepted."

#: appEditors/AppGeoEditor.py:5015
msgid "Failed, the result is empty. Choose a smaller buffer value."
msgstr "Failed, the result is empty. Choose a smaller buffer value."

#: appEditors/AppGeoEditor.py:5025
msgid "Interior buffer geometry created."
msgstr "Interior buffer geometry created."

#: appEditors/AppGeoEditor.py:5076
msgid "Exterior buffer geometry created."
msgstr "Exterior buffer geometry created."

#: appEditors/AppGeoEditor.py:5082
#, python-format
msgid "Could not do Paint. Overlap value has to be less than 100%%."
msgstr "Could not do Paint. Overlap value has to be less than 100%%."

#: appEditors/AppGeoEditor.py:5089
msgid "Nothing selected for painting."
msgstr "Nothing selected for painting."

#: appEditors/AppGeoEditor.py:5095
msgid "Invalid value for"
msgstr "Invalid value for"

#: appEditors/AppGeoEditor.py:5154
msgid ""
"Could not do Paint. Try a different combination of parameters. Or a "
"different method of Paint"
msgstr ""
"Could not do Paint. Try a different combination of parameters. Or a "
"different method of Paint"

#: appEditors/AppGeoEditor.py:5165
msgid "Paint done."
msgstr "Paint done."

#: appEditors/AppGerberEditor.py:211 appEditors/AppGerberEditor.py:415
#: appEditors/AppGerberEditor.py:880 appEditors/AppGerberEditor.py:1189
#: appEditors/AppGerberEditor.py:1461 appEditors/AppGerberEditor.py:1578
msgid "You need to preselect a aperture in the Aperture Table that has a size."
msgstr ""
"You need to preselect a aperture in the Aperture Table that has a size."

#: appEditors/AppGerberEditor.py:223 appEditors/AppGerberEditor.py:424
msgid "Aperture size is zero. It needs to be greater than zero."
msgstr "Aperture size is zero. It needs to be greater than zero."

#: appEditors/AppGerberEditor.py:376 appEditors/AppGerberEditor.py:690
msgid ""
"Incompatible aperture type. Select an aperture with type 'C', 'R' or 'O'."
msgstr ""
"Incompatible aperture type. Select an aperture with type 'C', 'R' or 'O'."

#: appEditors/AppGerberEditor.py:388
msgid "Done. Adding Pad completed."
msgstr "Done. Adding Pad completed."

#: appEditors/AppGerberEditor.py:496
msgid "Click on the Pad Circular Array Start position"
msgstr "Click on the Pad Circular Array Start position"

#: appEditors/AppGerberEditor.py:716
msgid "Too many Pads for the selected spacing angle."
msgstr "Too many Pads for the selected spacing angle."

#: appEditors/AppGerberEditor.py:739
msgid "Done. Pad Array added."
msgstr "Done. Pad Array added."

#: appEditors/AppGerberEditor.py:764
msgid "Select shape(s) and then click ..."
msgstr "Select shape(s) and then click ..."

#: appEditors/AppGerberEditor.py:776
msgid "Failed. Nothing selected."
msgstr "Failed. Nothing selected."

#: appEditors/AppGerberEditor.py:792
msgid ""
"Failed. Poligonize works only on geometries belonging to the same aperture."
msgstr ""
"Failed. Poligonize works only on geometries belonging to the same aperture."

#: appEditors/AppGerberEditor.py:841
msgid "Done. Poligonize completed."
msgstr "Done. Poligonize completed."

#: appEditors/AppGerberEditor.py:909 appEditors/AppGerberEditor.py:1131
#: appEditors/AppGerberEditor.py:1155
msgid "Corner Mode 1: 45 degrees ..."
msgstr "Corner Mode 1: 45 degrees ..."

#: appEditors/AppGerberEditor.py:921 appEditors/AppGerberEditor.py:1244
msgid "Click on next Point or click Right mouse button to complete ..."
msgstr "Click on next Point or click Right mouse button to complete ..."

#: appEditors/AppGerberEditor.py:1119 appEditors/AppGerberEditor.py:1152
msgid "Corner Mode 2: Reverse 45 degrees ..."
msgstr "Corner Mode 2: Reverse 45 degrees ..."

#: appEditors/AppGerberEditor.py:1122 appEditors/AppGerberEditor.py:1149
msgid "Corner Mode 3: 90 degrees ..."
msgstr "Corner Mode 3: 90 degrees ..."

#: appEditors/AppGerberEditor.py:1125 appEditors/AppGerberEditor.py:1146
msgid "Corner Mode 4: Reverse 90 degrees ..."
msgstr "Corner Mode 4: Reverse 90 degrees ..."

#: appEditors/AppGerberEditor.py:1128 appEditors/AppGerberEditor.py:1143
msgid "Corner Mode 5: Free angle ..."
msgstr "Corner Mode 5: Free angle ..."

#: appEditors/AppGerberEditor.py:1218 appEditors/AppGerberEditor.py:1383
#: appEditors/AppGerberEditor.py:1422
msgid "Track Mode 1: 45 degrees ..."
msgstr "Track Mode 1: 45 degrees ..."

#: appEditors/AppGerberEditor.py:1363 appEditors/AppGerberEditor.py:1417
msgid "Track Mode 2: Reverse 45 degrees ..."
msgstr "Track Mode 2: Reverse 45 degrees ..."

#: appEditors/AppGerberEditor.py:1368 appEditors/AppGerberEditor.py:1412
msgid "Track Mode 3: 90 degrees ..."
msgstr "Track Mode 3: 90 degrees ..."

#: appEditors/AppGerberEditor.py:1373 appEditors/AppGerberEditor.py:1407
msgid "Track Mode 4: Reverse 90 degrees ..."
msgstr "Track Mode 4: Reverse 90 degrees ..."

#: appEditors/AppGerberEditor.py:1378 appEditors/AppGerberEditor.py:1402
msgid "Track Mode 5: Free angle ..."
msgstr "Track Mode 5: Free angle ..."

#: appEditors/AppGerberEditor.py:1839
msgid "Scale the selected Gerber apertures ..."
msgstr "Scale the selected Gerber apertures ..."

#: appEditors/AppGerberEditor.py:1881
msgid "Buffer the selected apertures ..."
msgstr "Buffer the selected apertures ..."

#: appEditors/AppGerberEditor.py:1923
msgid "Mark polygon areas in the edited Gerber ..."
msgstr "Mark polygon areas in the edited Gerber ..."

#: appEditors/AppGerberEditor.py:1989
msgid "Nothing selected to move"
msgstr "Nothing selected to move"

#: appEditors/AppGerberEditor.py:2114
msgid "Done. Apertures Move completed."
msgstr "Done. Apertures Move completed."

#: appEditors/AppGerberEditor.py:2195
msgid "Done. Apertures copied."
msgstr "Done. Apertures copied."

#: appEditors/AppGerberEditor.py:2545 appGUI/MainGUI.py:745
#: appGUI/MainGUI.py:1642 appGUI/ObjectUI.py:241
#: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:27
msgid "Gerber Editor"
msgstr "Gerber Editor"

#: appEditors/AppGerberEditor.py:2565 appGUI/ObjectUI.py:281
#: appObjects/FlatCAMObj.py:492 appTools/ToolProperties.py:158
msgid "Apertures"
msgstr "Apertures"

#: appEditors/AppGerberEditor.py:2567 appGUI/ObjectUI.py:283
msgid "Apertures Table for the Gerber Object."
msgstr "Apertures Table for the Gerber Object."

#: appEditors/AppGerberEditor.py:2578 appEditors/AppGerberEditor.py:4034
#: appGUI/ObjectUI.py:316 appTools/ToolPunchGerber.py:1088
msgid "Code"
msgstr "Code"

#: appEditors/AppGerberEditor.py:2578 appEditors/AppGerberEditor.py:4034
#: appGUI/ObjectUI.py:316
msgid "Dim"
msgstr "Dim"

#: appEditors/AppGerberEditor.py:2583 appGUI/ObjectUI.py:320
msgid "Index"
msgstr "Index"

#: appEditors/AppGerberEditor.py:2585 appEditors/AppGerberEditor.py:2614
#: appGUI/ObjectUI.py:322 appTools/ToolPunchGerber.py:1095
msgid "Aperture Code"
msgstr "Aperture Code"

#: appEditors/AppGerberEditor.py:2587 appGUI/ObjectUI.py:324
#: appTools/ToolPunchGerber.py:1097
msgid "Type of aperture: circular, rectangle, macros etc"
msgstr "Type of aperture: circular, rectangle, macros etc"

#: appEditors/AppGerberEditor.py:2589 appGUI/ObjectUI.py:326
#: appTools/ToolPunchGerber.py:1099
msgid "Aperture Size:"
msgstr "Aperture Size:"

#: appEditors/AppGerberEditor.py:2591 appGUI/ObjectUI.py:328
msgid ""
"Aperture Dimensions:\n"
" - (width, height) for R, O type.\n"
" - (dia, nVertices) for P type"
msgstr ""
"Aperture Dimensions:\n"
" - (width, height) for R, O type.\n"
" - (dia, nVertices) for P type"

#: appEditors/AppGerberEditor.py:2615
#: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:58
msgid "Code for the new aperture"
msgstr "Code for the new aperture"

#: appEditors/AppGerberEditor.py:2624
msgid "Aperture Size"
msgstr "Aperture Size"

#: appEditors/AppGerberEditor.py:2626
msgid ""
"Size for the new aperture.\n"
"If aperture type is 'R' or 'O' then\n"
"this value is automatically\n"
"calculated as:\n"
"sqrt(width**2 + height**2)"
msgstr ""
"Size for the new aperture.\n"
"If aperture type is 'R' or 'O' then\n"
"this value is automatically\n"
"calculated as:\n"
"sqrt(width**2 + height**2)"

#: appEditors/AppGerberEditor.py:2640
msgid "Aperture Type"
msgstr "Aperture Type"

#: appEditors/AppGerberEditor.py:2642
msgid ""
"Select the type of new aperture. Can be:\n"
"C = circular\n"
"R = rectangular\n"
"O = oblong"
msgstr ""
"Select the type of new aperture. Can be:\n"
"C = circular\n"
"R = rectangular\n"
"O = oblong"

#: appEditors/AppGerberEditor.py:2653
msgid "Aperture Dim"
msgstr "Aperture Dim"

#: appEditors/AppGerberEditor.py:2655
msgid ""
"Dimensions for the new aperture.\n"
"Active only for rectangular apertures (type R).\n"
"The format is (width, height)"
msgstr ""
"Dimensions for the new aperture.\n"
"Active only for rectangular apertures (type R).\n"
"The format is (width, height)"

#: appEditors/AppGerberEditor.py:2664
msgid "Add/Delete Aperture"
msgstr "Add/Delete Aperture"

#: appEditors/AppGerberEditor.py:2666
msgid "Add/Delete an aperture in the aperture table"
msgstr "Add/Delete an aperture in the aperture table"

#: appEditors/AppGerberEditor.py:2675
msgid "Add a new aperture to the aperture list."
msgstr "Add a new aperture to the aperture list."

#: appEditors/AppGerberEditor.py:2678 appEditors/AppGerberEditor.py:2826
#: appGUI/GUIElements.py:325 appGUI/GUIElements.py:1012
#: appGUI/GUIElements.py:1397 appGUI/GUIElements.py:1602
#: appGUI/GUIElements.py:1935 appGUI/MainGUI.py:423 appGUI/MainGUI.py:734
#: appGUI/MainGUI.py:793 appGUI/MainGUI.py:872 appGUI/MainGUI.py:991
#: appGUI/MainGUI.py:1208 appGUI/MainGUI.py:1692 appGUI/MainGUI.py:2163
#: appGUI/MainGUI.py:2376 appGUI/MainGUI.py:4938 appGUI/ObjectUI.py:1125
#: appObjects/FlatCAMGeometry.py:578 appTools/ToolIsolation.py:71
#: appTools/ToolIsolation.py:3255 appTools/ToolNCC.py:69
#: appTools/ToolNCC.py:4137 appTools/ToolPaint.py:143
#: appTools/ToolPaint.py:2944 appTools/ToolSolderPaste.py:163
#: appTools/ToolSolderPaste.py:1210 app_Main.py:6296
msgid "Delete"
msgstr "Delete"

#: appEditors/AppGerberEditor.py:2680
msgid "Delete a aperture in the aperture list"
msgstr "Delete a aperture in the aperture list"

#: appEditors/AppGerberEditor.py:2697
msgid "Buffer Aperture"
msgstr "Buffer Aperture"

#: appEditors/AppGerberEditor.py:2699
msgid "Buffer a aperture in the aperture list"
msgstr "Buffer a aperture in the aperture list"

#: appEditors/AppGerberEditor.py:2712
#: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:195
msgid "Buffer distance"
msgstr "Buffer distance"

#: appEditors/AppGerberEditor.py:2713
msgid "Buffer corner"
msgstr "Buffer corner"

#: appEditors/AppGerberEditor.py:2715
msgid ""
"There are 3 types of corners:\n"
" - 'Round': the corner is rounded.\n"
" - 'Square': the corner is met in a sharp angle.\n"
" - 'Beveled': the corner is a line that directly connects the features "
"meeting in the corner"
msgstr ""
"There are 3 types of corners:\n"
" - 'Round': the corner is rounded.\n"
" - 'Square': the corner is met in a sharp angle.\n"
" - 'Beveled': the corner is a line that directly connects the features "
"meeting in the corner"

#: appEditors/AppGerberEditor.py:2745
msgid "Scale Aperture"
msgstr "Scale Aperture"

#: appEditors/AppGerberEditor.py:2747
msgid "Scale a aperture in the aperture list"
msgstr "Scale a aperture in the aperture list"

#: appEditors/AppGerberEditor.py:2755
#: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:210
msgid "Scale factor"
msgstr "Scale factor"

#: appEditors/AppGerberEditor.py:2757
msgid ""
"The factor by which to scale the selected aperture.\n"
"Values can be between 0.0000 and 999.9999"
msgstr ""
"The factor by which to scale the selected aperture.\n"
"Values can be between 0.0000 and 999.9999"

#: appEditors/AppGerberEditor.py:2785
msgid "Mark polygons"
msgstr "Mark polygons"

#: appEditors/AppGerberEditor.py:2787
msgid "Mark the polygon areas."
msgstr "Mark the polygon areas."

#: appEditors/AppGerberEditor.py:2795
msgid "Area UPPER threshold"
msgstr "Area UPPER threshold"

#: appEditors/AppGerberEditor.py:2797
msgid ""
"The threshold value, all areas less than this are marked.\n"
"Can have a value between 0.0000 and 10000.0000"
msgstr ""
"The threshold value, all areas less than this are marked.\n"
"Can have a value between 0.0000 and 10000.0000"

#: appEditors/AppGerberEditor.py:2804
msgid "Area LOWER threshold"
msgstr "Area LOWER threshold"

#: appEditors/AppGerberEditor.py:2806
msgid ""
"The threshold value, all areas more than this are marked.\n"
"Can have a value between 0.0000 and 10000.0000"
msgstr ""
"The threshold value, all areas more than this are marked.\n"
"Can have a value between 0.0000 and 10000.0000"

#: appEditors/AppGerberEditor.py:2820
msgid "Mark"
msgstr "Mark"

#: appEditors/AppGerberEditor.py:2822
msgid "Mark the polygons that fit within limits."
msgstr "Mark the polygons that fit within limits."

#: appEditors/AppGerberEditor.py:2828
msgid "Delete all the marked polygons."
msgstr "Delete all the marked polygons."

#: appEditors/AppGerberEditor.py:2834
msgid "Clear all the markings."
msgstr "Clear all the markings."

#: appEditors/AppGerberEditor.py:2854 appGUI/MainGUI.py:753
#: appGUI/MainGUI.py:1180 appGUI/MainGUI.py:2349 appGUI/MainGUI.py:4925
msgid "Add Pad Array"
msgstr "Add Pad Array"

#: appEditors/AppGerberEditor.py:2856
msgid "Add an array of pads (linear or circular array)"
msgstr "Add an array of pads (linear or circular array)"

#: appEditors/AppGerberEditor.py:2862
msgid ""
"Select the type of pads array to create.\n"
"It can be Linear X(Y) or Circular"
msgstr ""
"Select the type of pads array to create.\n"
"It can be Linear X(Y) or Circular"

#: appEditors/AppGerberEditor.py:2873
#: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:95
msgid "Nr of pads"
msgstr "Nr of pads"

#: appEditors/AppGerberEditor.py:2875
#: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:97
msgid "Specify how many pads to be in the array."
msgstr "Specify how many pads to be in the array."

#: appEditors/AppGerberEditor.py:2924
msgid ""
"Angle at which the linear array is placed.\n"
"The precision is of max 2 decimals.\n"
"Min value is: -359.99 degrees.\n"
"Max value is:  360.00 degrees."
msgstr ""
"Angle at which the linear array is placed.\n"
"The precision is of max 2 decimals.\n"
"Min value is: -359.99 degrees.\n"
"Max value is:  360.00 degrees."

#: appEditors/AppGerberEditor.py:3424 appEditors/AppGerberEditor.py:3428
msgid "Aperture code value is missing or wrong format. Add it and retry."
msgstr "Aperture code value is missing or wrong format. Add it and retry."

#: appEditors/AppGerberEditor.py:3464
msgid ""
"Aperture dimensions value is missing or wrong format. Add it in format "
"(width, height) and retry."
msgstr ""
"Aperture dimensions value is missing or wrong format. Add it in format "
"(width, height) and retry."

#: appEditors/AppGerberEditor.py:3477
msgid "Aperture size value is missing or wrong format. Add it and retry."
msgstr "Aperture size value is missing or wrong format. Add it and retry."

#: appEditors/AppGerberEditor.py:3488
msgid "Aperture already in the aperture table."
msgstr "Aperture already in the aperture table."

#: appEditors/AppGerberEditor.py:3495
msgid "Added new aperture with code"
msgstr "Added new aperture with code"

#: appEditors/AppGerberEditor.py:3527
msgid " Select an aperture in Aperture Table"
msgstr " Select an aperture in Aperture Table"

#: appEditors/AppGerberEditor.py:3535
msgid "Select an aperture in Aperture Table -->"
msgstr "Select an aperture in Aperture Table -->"

#: appEditors/AppGerberEditor.py:3549
msgid "Deleted aperture with code"
msgstr "Deleted aperture with code"

#: appEditors/AppGerberEditor.py:3617
msgid "Dimensions need two float values separated by comma."
msgstr "Dimensions need two float values separated by comma."

#: appEditors/AppGerberEditor.py:3626
msgid "Dimensions edited."
msgstr "Dimensions edited."

#: appEditors/AppGerberEditor.py:4148
msgid "Loading"
msgstr "Loading"

#: appEditors/AppGerberEditor.py:4278
msgid "Setting up the UI"
msgstr "Setting up the UI"

#: appEditors/AppGerberEditor.py:4279
msgid "Adding geometry finished. Preparing the GUI"
msgstr "Adding geometry finished. Preparing the GUI"

#: appEditors/AppGerberEditor.py:4288
msgid "Finished loading the Gerber object into the editor."
msgstr "Finished loading the Gerber object into the editor."

#: appEditors/AppGerberEditor.py:4425
msgid ""
"There are no Aperture definitions in the file. Aborting Gerber creation."
msgstr ""
"There are no Aperture definitions in the file. Aborting Gerber creation."

#: appEditors/AppGerberEditor.py:4427 appObjects/AppObject.py:164
#: appObjects/FlatCAMGeometry.py:2078 appParsers/ParseExcellon.py:972
#: appTools/ToolPcbWizard.py:318 app_Main.py:7709 app_Main.py:10173
#: app_Main.py:10233 app_Main.py:10364 app_Main.py:10429
msgid "An internal error has occurred. See shell.\n"
msgstr "An internal error has occurred. See shell.\n"

#: appEditors/AppGerberEditor.py:4447
msgid "Done. Gerber editing finished."
msgstr "Done. Gerber editing finished."

#: appEditors/AppGerberEditor.py:4463
msgid "Cancelled. No aperture is selected"
msgstr "Cancelled. No aperture is selected"

#: appEditors/AppGerberEditor.py:4618 app_Main.py:6634
msgid "Coordinates copied to clipboard."
msgstr "Coordinates copied to clipboard."

#: appEditors/AppGerberEditor.py:4923
#: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:339
#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:341
#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:303
#: appObjects/AppObject.py:452 appObjects/FlatCAMCNCJob.py:1894
#: appObjects/FlatCAMGerber.py:995 appObjects/FlatCAMObj.py:266
#: appObjects/FlatCAMObj.py:297 appObjects/FlatCAMObj.py:313
#: appObjects/FlatCAMObj.py:393 appTools/ToolCopperThieving.py:1115
#: appTools/ToolCorners.py:419 appTools/ToolFiducials.py:563
#: appTools/ToolMove.py:229 appTools/ToolQRCode.py:466 app_Main.py:4813
msgid "Plotting"
msgstr "Plotting"

#: appEditors/AppGerberEditor.py:5065
msgid "Failed. No aperture geometry is selected."
msgstr "Failed. No aperture geometry is selected."

#: appEditors/AppGerberEditor.py:5074 appEditors/AppGerberEditor.py:5345
msgid "Done. Apertures geometry deleted."
msgstr "Done. Apertures geometry deleted."

#: appEditors/AppGerberEditor.py:5217
msgid "No aperture to buffer. Select at least one aperture and try again."
msgstr "No aperture to buffer. Select at least one aperture and try again."

#: appEditors/AppGerberEditor.py:5229 appTools/ToolCopperThieving.py:306
#: appTools/ToolCopperThieving.py:907 appTools/ToolCopperThieving.py:1104
#: appTools/ToolCorners.py:146 appTools/ToolCorners.py:413
#: appTools/ToolCutOut.py:779 appTools/ToolCutOut.py:905
#: appTools/ToolCutOut.py:1128 appTools/ToolCutOut.py:1278
#: appTools/ToolFiducials.py:240 appTools/ToolFiducials.py:492
#: appTools/ToolFiducials.py:540 appTools/ToolFiducials.py:554 camlib.py:5286
#: camlib.py:5682
msgid "Failed."
msgstr "Failed."

#: appEditors/AppGerberEditor.py:5248
msgid "Scale factor value is missing or wrong format. Add it and retry."
msgstr "Scale factor value is missing or wrong format. Add it and retry."

#: appEditors/AppGerberEditor.py:5280
msgid "No aperture to scale. Select at least one aperture and try again."
msgstr "No aperture to scale. Select at least one aperture and try again."

#: appEditors/AppGerberEditor.py:5296
msgid "Done. Scale Tool completed."
msgstr "Done. Scale Tool completed."

#: appEditors/AppGerberEditor.py:5334
msgid "Polygons marked."
msgstr "Polygons marked."

#: appEditors/AppGerberEditor.py:5337
msgid "No polygons were marked. None fit within the limits."
msgstr "No polygons were marked. None fit within the limits."

#: appEditors/AppGerberEditor.py:6065
msgid "Rotation action was not executed."
msgstr "Rotation action was not executed."

#: appEditors/AppGerberEditor.py:6107 app_Main.py:6050 app_Main.py:6097
msgid "Flip action was not executed."
msgstr "Flip action was not executed."

#: appEditors/AppGerberEditor.py:6147
msgid "Skew action was not executed."
msgstr "Skew action was not executed."

#: appEditors/AppGerberEditor.py:6186
msgid "Scale action was not executed."
msgstr "Scale action was not executed."

#: appEditors/AppGerberEditor.py:6230
msgid "Offset action was not executed."
msgstr "Offset action was not executed."

#: appEditors/AppGerberEditor.py:6319
msgid "Geometry shape offset Y cancelled"
msgstr "Geometry shape offset Y cancelled"

#: appEditors/AppGerberEditor.py:6335
msgid "Geometry shape skew X cancelled"
msgstr "Geometry shape skew X cancelled"

#: appEditors/AppGerberEditor.py:6351
msgid "Geometry shape skew Y cancelled"
msgstr "Geometry shape skew Y cancelled"

#: appEditors/AppTextEditor.py:84
msgid "Find"
msgstr "Find"

#: appEditors/AppTextEditor.py:86
msgid "Will search and highlight in yellow the string in the Find box."
msgstr "Will search and highlight in yellow the string in the Find box."

#: appEditors/AppTextEditor.py:91
msgid "Find box. Enter here the strings to be searched in the text."
msgstr "Find box. Enter here the strings to be searched in the text."

#: appEditors/AppTextEditor.py:95
msgid "Replace With"
msgstr "Replace With"

#: appEditors/AppTextEditor.py:97
msgid ""
"Will replace the string from the Find box with the one in the Replace box."
msgstr ""
"Will replace the string from the Find box with the one in the Replace box."

#: appEditors/AppTextEditor.py:102
msgid "String to replace the one in the Find box throughout the text."
msgstr "String to replace the one in the Find box throughout the text."

#: appEditors/AppTextEditor.py:106 appGUI/GUIElements.py:4273
#: appGUI/ObjectUI.py:1889 appGUI/preferences/cncjob/CNCJobOptPrefGroupUI.py:61
#: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:295
#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:278
#: appTools/ToolIsolation.py:3483 appTools/ToolPaint.py:3116
#: tclCommands/TclCommandPaint.py:162
msgid "All"
msgstr "All"

#: appEditors/AppTextEditor.py:107
msgid ""
"When checked it will replace all instances in the 'Find' box\n"
"with the text in the 'Replace' box.."
msgstr ""
"When checked it will replace all instances in the 'Find' box\n"
"with the text in the 'Replace' box.."

#: appEditors/AppTextEditor.py:120
msgid "Save changes internally."
msgstr "Save changes internally."

#: appEditors/AppTextEditor.py:127
msgid "Open a OS standard Preview Print window."
msgstr "Open a OS standard Preview Print window."

#: appEditors/AppTextEditor.py:133
msgid "Open a OS standard Print window."
msgstr "Open a OS standard Print window."

#: appEditors/AppTextEditor.py:139
msgid "Will open a text file in the editor."
msgstr "Will open a text file in the editor."

#: appEditors/AppTextEditor.py:145
msgid "Will save the text in the editor into a file."
msgstr "Will save the text in the editor into a file."

#: appEditors/AppTextEditor.py:149
msgid "Run"
msgstr "Run"

#: appEditors/AppTextEditor.py:150
msgid "Will run the TCL commands found in the text file, one by one."
msgstr "Will run the TCL commands found in the text file, one by one."

#: appEditors/AppTextEditor.py:218 appEditors/appGCodeEditor.py:599
msgid "Open file"
msgstr "Open file"

#: appEditors/AppTextEditor.py:249 appEditors/AppTextEditor.py:255
#: appObjects/FlatCAMCNCJob.py:1651 appObjects/FlatCAMCNCJob.py:1657
#: appObjects/FlatCAMCNCJob.py:1843 appObjects/FlatCAMCNCJob.py:1849
#: appObjects/FlatCAMCNCJob.py:1923 appObjects/FlatCAMCNCJob.py:1929
#: appTools/ToolSolderPaste.py:1063 app_Main.py:7091 app_Main.py:7097
msgid "Export Code ..."
msgstr "Export Code ..."

#: appEditors/AppTextEditor.py:310 appObjects/FlatCAMCNCJob.py:1675
#: appObjects/FlatCAMCNCJob.py:1867 appObjects/FlatCAMCNCJob.py:2329
#: appTools/ToolSolderPaste.py:1094
msgid "No such file or directory"
msgstr "No such file or directory"

#: appEditors/AppTextEditor.py:322 appObjects/FlatCAMCNCJob.py:2343
msgid "Saved to"
msgstr "Saved to"

#: appEditors/appGCodeEditor.py:71 app_Main.py:7253
msgid "Code Editor"
msgstr "Code Editor"

#: appEditors/appGCodeEditor.py:141 appEditors/appGCodeEditor.py:233
msgid "All GCode"
msgstr "All GCode"

#: appEditors/appGCodeEditor.py:147 appEditors/appGCodeEditor.py:239
msgid "Header GCode"
msgstr "Header GCode"

#: appEditors/appGCodeEditor.py:153 appEditors/appGCodeEditor.py:245
msgid "Start GCode"
msgstr "Start GCode"

#: appEditors/appGCodeEditor.py:574 appObjects/FlatCAMCNCJob.py:2022
#: appTools/ToolCalibration.py:447
msgid "Loaded Machine Code into Code Editor"
msgstr "Loaded Machine Code into Code Editor"

#: appEditors/appGCodeEditor.py:662 appGUI/ObjectUI.py:1909
msgid "GCode Editor"
msgstr "GCode Editor"

#: appEditors/appGCodeEditor.py:687 appEditors/appGCodeEditor.py:698
#: appGUI/ObjectUI.py:999 appGUI/ObjectUI.py:2034 appGUI/ObjectUI.py:2044
#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:151
#: appTools/ToolCopperThieving.py:1418
msgid "Dia"
msgstr "Dia"

#: appEditors/appGCodeEditor.py:687 appGUI/ObjectUI.py:999
#: appGUI/ObjectUI.py:2034 appTools/ToolIsolation.py:3127
#: appTools/ToolNCC.py:3998 appTools/ToolPaint.py:2831
msgid "TT"
msgstr "TT"

#: appEditors/appGCodeEditor.py:698 appGUI/ObjectUI.py:666
#: appGUI/ObjectUI.py:2044
#: appGUI/preferences/excellon/ExcellonOptPrefGroupUI.py:71
#: appObjects/FlatCAMObj.py:499 appTools/ToolDrilling.py:2065
#: appTools/ToolMilling.py:1670 appTools/ToolMilling.py:1769
#: appTools/ToolProperties.py:165
msgid "Drills"
msgstr "Drills"

#: appEditors/appGCodeEditor.py:698 appGUI/ObjectUI.py:666
#: appGUI/ObjectUI.py:2044
#: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:158
#: appGUI/preferences/excellon/ExcellonOptPrefGroupUI.py:72
#: appObjects/FlatCAMObj.py:501 appTools/ToolDrilling.py:2065
#: appTools/ToolMilling.py:1670 appTools/ToolMilling.py:1770
#: appTools/ToolProperties.py:167
msgid "Slots"
msgstr "Slots"

#: appEditors/appGCodeEditor.py:707 appEditors/appGCodeEditor.py:729
msgid "CNC Code Snippet"
msgstr "CNC Code Snippet"

#: appEditors/appGCodeEditor.py:709 appEditors/appGCodeEditor.py:731
msgid "Code snippet defined in Preferences."
msgstr "Code snippet defined in Preferences."

#: appEditors/appGCodeEditor.py:715 appEditors/appGCodeEditor.py:737
msgid ""
"Type here any G-Code commands you would\n"
"like to insert at the cursor location."
msgstr ""
"Type here any G-Code commands you would\n"
"like to insert at the cursor location."

#: appEditors/appGCodeEditor.py:721 appEditors/appGCodeEditor.py:743
msgid "Insert Code"
msgstr "Insert Code"

#: appEditors/appGCodeEditor.py:724 appEditors/appGCodeEditor.py:746
msgid "Insert the code above at the cursor location."
msgstr "Insert the code above at the cursor location."

#: appGUI/GUIElements.py:290 appGUI/GUIElements.py:977
#: appGUI/GUIElements.py:1362 appGUI/GUIElements.py:1567
#: appGUI/GUIElements.py:1900
msgid "Undo"
msgstr "Undo"

#: appGUI/GUIElements.py:290 appGUI/GUIElements.py:977
#: appGUI/GUIElements.py:1362 appGUI/GUIElements.py:1567
#: appGUI/GUIElements.py:1900
msgid "Ctrl+Z"
msgstr "Ctrl+Z"

#: appGUI/GUIElements.py:297 appGUI/GUIElements.py:984
#: appGUI/GUIElements.py:1369 appGUI/GUIElements.py:1574
#: appGUI/GUIElements.py:1907
msgid "Redo"
msgstr "Redo"

#: appGUI/GUIElements.py:297 appGUI/GUIElements.py:984
#: appGUI/GUIElements.py:1369 appGUI/GUIElements.py:1574
#: appGUI/GUIElements.py:1907
msgid "Ctrl+Y"
msgstr "Ctrl+Y"

#: appGUI/GUIElements.py:306 appGUI/GUIElements.py:993
#: appGUI/GUIElements.py:1378 appGUI/GUIElements.py:1583
#: appGUI/GUIElements.py:1916 appGUI/MainGUI.py:1633 appGUI/ObjectUI.py:1891
#: appGUI/preferences/cncjob/CNCJobOptPrefGroupUI.py:63
msgid "Cut"
msgstr "Cut"

#: appGUI/GUIElements.py:306 appGUI/GUIElements.py:993
#: appGUI/GUIElements.py:1378 appGUI/GUIElements.py:1583
#: appGUI/GUIElements.py:1916 appGUI/MainGUI.py:4708
msgid "Ctrl+X"
msgstr "Ctrl+X"

#: appGUI/GUIElements.py:313 appGUI/GUIElements.py:1000
#: appGUI/GUIElements.py:1385 appGUI/GUIElements.py:1590
#: appGUI/GUIElements.py:1923 appGUI/GUIElements.py:3736 appGUI/MainGUI.py:417
#: appGUI/MainGUI.py:731 appGUI/MainGUI.py:790 appGUI/MainGUI.py:870
#: appGUI/MainGUI.py:989 appGUI/MainGUI.py:1206 appGUI/MainGUI.py:1690
#: appGUI/MainGUI.py:2161 appGUI/MainGUI.py:2374 appGUI/MainGUI.py:4927
#: appObjects/FlatCAMGeometry.py:575 appTools/ToolPanelize.py:326
#: appTools/ToolPanelize.py:352 appTools/ToolPanelize.py:449
#: appTools/ToolPanelize.py:478 appTools/ToolPanelize.py:539
msgid "Copy"
msgstr "Copy"

#: appGUI/GUIElements.py:313 appGUI/GUIElements.py:1000
#: appGUI/GUIElements.py:1385 appGUI/GUIElements.py:1590
#: appGUI/GUIElements.py:1923 appGUI/GUIElements.py:3736 appGUI/MainGUI.py:417
#: appGUI/MainGUI.py:4439
msgid "Ctrl+C"
msgstr "Ctrl+C"

#: appGUI/GUIElements.py:320 appGUI/GUIElements.py:1007
#: appGUI/GUIElements.py:1392 appGUI/GUIElements.py:1597
#: appGUI/GUIElements.py:1930
msgid "Paste"
msgstr "Paste"

#: appGUI/GUIElements.py:320 appGUI/GUIElements.py:1007
#: appGUI/GUIElements.py:1392 appGUI/GUIElements.py:1597
#: appGUI/GUIElements.py:1930
msgid "Ctrl+V"
msgstr "Ctrl+V"

#: appGUI/GUIElements.py:325 appGUI/GUIElements.py:1012
#: appGUI/GUIElements.py:1397 appGUI/GUIElements.py:1602
#: appGUI/GUIElements.py:1935 appGUI/GUIElements.py:3754 appGUI/MainGUI.py:4507
#: appGUI/MainGUI.py:4508 appGUI/MainGUI.py:4712 appGUI/MainGUI.py:4804
#: appGUI/MainGUI.py:4805 appGUI/MainGUI.py:4938 appGUI/MainGUI.py:4939
msgid "Del"
msgstr "Del"

#: appGUI/GUIElements.py:332 appGUI/GUIElements.py:1019
#: appGUI/GUIElements.py:1404 appGUI/GUIElements.py:1609
#: appGUI/GUIElements.py:1942 appGUI/GUIElements.py:3744 appGUI/MainGUI.py:448
#: appGUI/MainGUI.py:568 appGUI/MainGUI.py:4438
#: appObjects/ObjectCollection.py:1128 appObjects/ObjectCollection.py:1175
msgid "Select All"
msgstr "Select All"

#: appGUI/GUIElements.py:332 appGUI/GUIElements.py:1019
#: appGUI/GUIElements.py:1404 appGUI/GUIElements.py:1609
#: appGUI/GUIElements.py:1942 appGUI/GUIElements.py:3744 appGUI/MainGUI.py:448
#: appGUI/MainGUI.py:4438
msgid "Ctrl+A"
msgstr "Ctrl+A"

#: appGUI/GUIElements.py:1026 appGUI/GUIElements.py:1411
msgid "Step Up"
msgstr "Step Up"

#: appGUI/GUIElements.py:1031 appGUI/GUIElements.py:1416
msgid "Step Down"
msgstr "Step Down"

#: appGUI/GUIElements.py:3676
msgid ""
"The reference can be:\n"
"- Absolute -> the reference point is point (0,0)\n"
"- Relative -> the reference point is the mouse position before Jump"
msgstr ""
"The reference can be:\n"
"- Absolute -> the reference point is point (0,0)\n"
"- Relative -> the reference point is the mouse position before Jump"

#: appGUI/GUIElements.py:3681
msgid "Abs"
msgstr "Abs"

#: appGUI/GUIElements.py:3682
msgid "Relative"
msgstr "Relative"

#: appGUI/GUIElements.py:3692
msgid "Location"
msgstr "Location"

#: appGUI/GUIElements.py:3694
msgid ""
"The Location value is a tuple (x,y).\n"
"If the reference is Absolute then the Jump will be at the position (x,y).\n"
"If the reference is Relative then the Jump will be at the (x,y) distance\n"
"from the current mouse location point."
msgstr ""
"The Location value is a tuple (x,y).\n"
"If the reference is Absolute then the Jump will be at the position (x,y).\n"
"If the reference is Relative then the Jump will be at the (x,y) distance\n"
"from the current mouse location point."

#: appGUI/GUIElements.py:3749
msgid "Save Log"
msgstr "Save Log"

#: appGUI/GUIElements.py:3749 appGUI/MainGUI.py:164 appGUI/MainGUI.py:346
#: appGUI/MainGUI.py:4448 appGUI/MainGUI.py:4707 appGUI/MainGUI.py:4807
#: appGUI/MainGUI.py:4943
msgid "Ctrl+S"
msgstr "Ctrl+S"

#: appGUI/GUIElements.py:3754
msgid "Clear All"
msgstr "Clear All"

#: appGUI/GUIElements.py:3801 appTools/ToolShell.py:299
msgid "Type >help< to get started"
msgstr "Type >help< to get started"

#: appGUI/GUIElements.py:4168 appGUI/GUIElements.py:4185
msgid "Jog the Y axis."
msgstr "Jog the Y axis."

#: appGUI/GUIElements.py:4176
msgid "Move to Origin."
msgstr "Move to Origin."

#: appGUI/GUIElements.py:4193 appGUI/GUIElements.py:4201
msgid "Jog the X axis."
msgstr "Jog the X axis."

#: appGUI/GUIElements.py:4211 appGUI/GUIElements.py:4221
msgid "Jog the Z axis."
msgstr "Jog the Z axis."

#: appGUI/GUIElements.py:4247
msgid "Zero the CNC X axes at current position."
msgstr "Zero the CNC X axes at current position."

#: appGUI/GUIElements.py:4255
msgid "Zero the CNC Y axes at current position."
msgstr "Zero the CNC Y axes at current position."

#: appGUI/GUIElements.py:4260
msgid "Z"
msgstr "Z"

#: appGUI/GUIElements.py:4263
msgid "Zero the CNC Z axes at current position."
msgstr "Zero the CNC Z axes at current position."

#: appGUI/GUIElements.py:4267
msgid "Do Home"
msgstr "Do Home"

#: appGUI/GUIElements.py:4269
msgid "Perform a homing cycle on all axis."
msgstr "Perform a homing cycle on all axis."

#: appGUI/GUIElements.py:4277
msgid "Zero all CNC axes at current position."
msgstr "Zero all CNC axes at current position."

#: appGUI/GUIElements.py:4432 appGUI/GUIElements.py:4441
msgid "Idle."
msgstr "Idle."

#: appGUI/GUIElements.py:4474
msgid "Application started ..."
msgstr "Application started ..."

#: appGUI/GUIElements.py:4475
msgid "Hello!"
msgstr "Hello!"

#: appGUI/GUIElements.py:4522 appGUI/MainGUI.py:1033 appGUI/MainGUI.py:2202
msgid "Run Script ..."
msgstr "Run Script ..."

#: appGUI/GUIElements.py:4524 appGUI/MainGUI.py:199
msgid ""
"Will run the opened Tcl Script thus\n"
"enabling the automation of certain\n"
"functions of FlatCAM."
msgstr ""
"Will run the opened Tcl Script thus\n"
"enabling the automation of certain\n"
"functions of FlatCAM."

#: appGUI/GUIElements.py:4533 appGUI/MainGUI.py:121
#: appTools/ToolPcbWizard.py:390 appTools/ToolPcbWizard.py:397
msgid "Open"
msgstr "Open"

#: appGUI/GUIElements.py:4537
msgid "Open Project ..."
msgstr "Open Project ..."

#: appGUI/GUIElements.py:4543
msgid "Open &Gerber ...\tCtrl+G"
msgstr "Open &Gerber ...\tCtrl+G"

#: appGUI/GUIElements.py:4548
msgid "Open &Excellon ...\tCtrl+E"
msgstr "Open &Excellon ...\tCtrl+E"

#: appGUI/GUIElements.py:4553
msgid "Open G-&Code ..."
msgstr "Open G-&Code ..."

#: appGUI/GUIElements.py:4563 appGUI/MainGUI.py:330
msgid "Exit"
msgstr "Exit"

#: appGUI/MainGUI.py:70 appGUI/MainGUI.py:72 appGUI/MainGUI.py:1572
msgid "Toggle Panel"
msgstr "Toggle Panel"

#: appGUI/MainGUI.py:82
msgid "File"
msgstr "File"

#: appGUI/MainGUI.py:87 appGUI/MainGUI.py:4444
msgid "New Project"
msgstr "New Project"

#: appGUI/MainGUI.py:87 appGUI/MainGUI.py:4444
msgid "Ctrl+N"
msgstr "Ctrl+N"

#: appGUI/MainGUI.py:89
msgid "Will create a new, blank project"
msgstr "Will create a new, blank project"

#: appGUI/MainGUI.py:94 appGUI/MainGUI.py:1576 appGUI/ObjectUI.py:2367
msgid "New"
msgstr "New"

#: appGUI/MainGUI.py:98 appGUI/MainGUI.py:1578
#: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:78
#: appObjects/ObjectCollection.py:234 appTools/ToolCalibration.py:171
#: appTools/ToolCalibration.py:1326 appTools/ToolCalibration.py:1343
#: appTools/ToolCopperThieving.py:165 appTools/ToolCopperThieving.py:1340
#: appTools/ToolCopperThieving.py:1354 appTools/ToolCutOut.py:2027
#: appTools/ToolDblSided.py:529 appTools/ToolDblSided.py:771
#: appTools/ToolFilm.py:933 appTools/ToolFilm.py:956 appTools/ToolImage.py:135
#: appTools/ToolImage.py:190 appTools/ToolIsolation.py:3443
#: appTools/ToolIsolation.py:3496 appTools/ToolNCC.py:3961
#: appTools/ToolNCC.py:4431 appTools/ToolPaint.py:3132
#: appTools/ToolPanelize.py:148 appTools/ToolPanelize.py:168
#: appTools/ToolPanelize.py:716 appTools/ToolTransform.py:126
#: appTools/ToolTransform.py:587
msgid "Geometry"
msgstr "Geometry"

#: appGUI/MainGUI.py:98 appGUI/MainGUI.py:648 appGUI/MainGUI.py:759
#: appGUI/MainGUI.py:4424 appGUI/MainGUI.py:4691 appGUI/MainGUI.py:4932
msgid "N"
msgstr "N"

#: appGUI/MainGUI.py:100
msgid "Will create a new, empty Geometry Object."
msgstr "Will create a new, empty Geometry Object."

#: appGUI/MainGUI.py:103
#: appGUI/preferences/tools/ToolsPanelizePrefGroupUI.py:97
#: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:76
#: appObjects/ObjectCollection.py:232 appTools/ToolAlignObjects.py:398
#: appTools/ToolAlignObjects.py:434 appTools/ToolCalibration.py:163
#: appTools/ToolCalibration.py:171 appTools/ToolCalibration.py:891
#: appTools/ToolCalibration.py:1326 appTools/ToolCalibration.py:1343
#: appTools/ToolCopperThieving.py:165 appTools/ToolCopperThieving.py:1340
#: appTools/ToolCopperThieving.py:1354 appTools/ToolCutOut.py:2026
#: appTools/ToolDblSided.py:528 appTools/ToolDblSided.py:769
#: appTools/ToolFilm.py:932 appTools/ToolFilm.py:955 appTools/ToolImage.py:116
#: appTools/ToolImage.py:137 appTools/ToolImage.py:190
#: appTools/ToolIsolation.py:3444 appTools/ToolIsolation.py:3496
#: appTools/ToolNCC.py:3962 appTools/ToolNCC.py:4431 appTools/ToolPaint.py:3132
#: appTools/ToolPanelize.py:148 appTools/ToolPanelize.py:168
#: appTools/ToolPanelize.py:716 appTools/ToolPanelize.py:810
#: appTools/ToolTransform.py:126 appTools/ToolTransform.py:585 defaults.py:573
msgid "Gerber"
msgstr "Gerber"

#: appGUI/MainGUI.py:103 appGUI/MainGUI.py:687 appGUI/MainGUI.py:773
#: appGUI/MainGUI.py:4418 appGUI/MainGUI.py:4682 appGUI/MainGUI.py:4926
msgid "B"
msgstr "B"

#: appGUI/MainGUI.py:105
msgid "Will create a new, empty Gerber Object."
msgstr "Will create a new, empty Gerber Object."

#: appGUI/MainGUI.py:108 appGUI/MainGUI.py:1582
#: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:99
#: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:77
#: appObjects/ObjectCollection.py:233 appTools/ToolAlignObjects.py:399
#: appTools/ToolAlignObjects.py:435 appTools/ToolCalibration.py:163
#: appTools/ToolCalibration.py:171 appTools/ToolCalibration.py:892
#: appTools/ToolCalibration.py:1326 appTools/ToolCalibration.py:1343
#: appTools/ToolCopperThieving.py:165 appTools/ToolCopperThieving.py:1340
#: appTools/ToolCopperThieving.py:1354 appTools/ToolDblSided.py:530
#: appTools/ToolDblSided.py:728 appTools/ToolDblSided.py:770
#: appTools/ToolFilm.py:1211 appTools/ToolIsolation.py:3496
#: appTools/ToolNCC.py:4431 appTools/ToolPaint.py:3132
#: appTools/ToolPanelize.py:148 appTools/ToolPunchGerber.py:1128
#: appTools/ToolPunchGerber.py:1143 appTools/ToolTransform.py:126
#: appTools/ToolTransform.py:586
msgid "Excellon"
msgstr "Excellon"

#: appGUI/MainGUI.py:108 appGUI/MainGUI.py:4422
msgid "L"
msgstr "L"

#: appGUI/MainGUI.py:110
msgid "Will create a new, empty Excellon Object."
msgstr "Will create a new, empty Excellon Object."

#: appGUI/MainGUI.py:115 appObjects/ObjectCollection.py:237
msgid "Document"
msgstr "Document"

#: appGUI/MainGUI.py:115 appGUI/MainGUI.py:714 appGUI/MainGUI.py:770
#: appGUI/MainGUI.py:4684 appGUI/MainGUI.py:4796 appGUI/MainGUI.py:4928
msgid "D"
msgstr "D"

#: appGUI/MainGUI.py:117
msgid "Will create a new, empty Document Object."
msgstr "Will create a new, empty Document Object."

#: appGUI/MainGUI.py:126 appGUI/MainGUI.py:4445 app_Main.py:8424
#: app_Main.py:8427
msgid "Open Project"
msgstr "Open Project"

#: appGUI/MainGUI.py:126 appGUI/MainGUI.py:4445
msgid "Ctrl+O"
msgstr "Ctrl+O"

#: appGUI/MainGUI.py:133 appGUI/MainGUI.py:969 appGUI/MainGUI.py:2140
#: app_Main.py:8304 app_Main.py:8309
msgid "Open Gerber"
msgstr "Open Gerber"

#: appGUI/MainGUI.py:133 appGUI/MainGUI.py:4442
msgid "Ctrl+G"
msgstr "Ctrl+G"

#: appGUI/MainGUI.py:138 appGUI/MainGUI.py:971 appGUI/MainGUI.py:2142
#: app_Main.py:8344 app_Main.py:8349
msgid "Open Excellon"
msgstr "Open Excellon"

#: appGUI/MainGUI.py:138 appGUI/MainGUI.py:782 appGUI/MainGUI.py:4441
#: appGUI/MainGUI.py:4942
msgid "Ctrl+E"
msgstr "Ctrl+E"

#: appGUI/MainGUI.py:143 app_Main.py:8387 app_Main.py:8392
msgid "Open G-Code"
msgstr "Open G-Code"

#: appGUI/MainGUI.py:150
msgid "Open Config"
msgstr "Open Config"

#: appGUI/MainGUI.py:155
msgid "Recent projects"
msgstr "Recent projects"

#: appGUI/MainGUI.py:157
msgid "Recent files"
msgstr "Recent files"

#: appGUI/MainGUI.py:160 appGUI/MainGUI.py:874 appGUI/MainGUI.py:1545
msgid "Save"
msgstr "Save"

#: appGUI/MainGUI.py:164 appGUI/MainGUI.py:4448
msgid "Save Project"
msgstr "Save Project"

#: appGUI/MainGUI.py:170 appGUI/MainGUI.py:4499
msgid "Save Project As"
msgstr "Save Project As"

#: appGUI/MainGUI.py:170 appGUI/MainGUI.py:4499
msgid "Ctrl+Shift+S"
msgstr "Ctrl+Shift+S"

#: appGUI/MainGUI.py:185
msgid "Scripting"
msgstr "Scripting"

#: appGUI/MainGUI.py:189
msgid "New Script"
msgstr "New Script"

#: appGUI/MainGUI.py:191
msgid "Open Script"
msgstr "Open Script"

#: appGUI/MainGUI.py:194
msgid "Open Example"
msgstr "Open Example"

#: appGUI/MainGUI.py:197
msgid "Run Script"
msgstr "Run Script"

#: appGUI/MainGUI.py:197 appGUI/MainGUI.py:4461
msgid "Shift+S"
msgstr "Shift+S"

#: appGUI/MainGUI.py:214
msgid "Import"
msgstr "Import"

#: appGUI/MainGUI.py:217
msgid "SVG as Geometry Object"
msgstr "SVG as Geometry Object"

#: appGUI/MainGUI.py:221
msgid "SVG as Gerber Object"
msgstr "SVG as Gerber Object"

#: appGUI/MainGUI.py:227
msgid "DXF as Geometry Object"
msgstr "DXF as Geometry Object"

#: appGUI/MainGUI.py:231
msgid "DXF as Gerber Object"
msgstr "DXF as Gerber Object"

#: appGUI/MainGUI.py:236
msgid "HPGL2 as Geometry Object"
msgstr "HPGL2 as Geometry Object"

#: appGUI/MainGUI.py:242
msgid "Export"
msgstr "Export"

#: appGUI/MainGUI.py:247 appTools/ToolQRCode.py:569 appTools/ToolQRCode.py:574
#: app_Main.py:8542 app_Main.py:8547
msgid "Export SVG"
msgstr "Export SVG"

#: appGUI/MainGUI.py:252 app_Main.py:8899 app_Main.py:8904
msgid "Export DXF"
msgstr "Export DXF"

#: appGUI/MainGUI.py:259 appTools/ToolQRCode.py:520 appTools/ToolQRCode.py:525
msgid "Export PNG"
msgstr "Export PNG"

#: appGUI/MainGUI.py:261
msgid ""
"Will export an image in PNG format,\n"
"the saved image will contain the visual \n"
"information currently in FlatCAM Plot Area."
msgstr ""
"Will export an image in PNG format,\n"
"the saved image will contain the visual \n"
"information currently in FlatCAM Plot Area."

#: appGUI/MainGUI.py:271 app_Main.py:8793 app_Main.py:8798
msgid "Export Excellon"
msgstr "Export Excellon"

#: appGUI/MainGUI.py:273
msgid ""
"Will export an Excellon Object as Excellon file,\n"
"the coordinates format, the file units and zeros\n"
"are set in Preferences -> Excellon Export."
msgstr ""
"Will export an Excellon Object as Excellon file,\n"
"the coordinates format, the file units and zeros\n"
"are set in Preferences -> Excellon Export."

#: appGUI/MainGUI.py:281 app_Main.py:8838 app_Main.py:8843
msgid "Export Gerber"
msgstr "Export Gerber"

#: appGUI/MainGUI.py:283
msgid ""
"Will export an Gerber Object as Gerber file,\n"
"the coordinates format, the file units and zeros\n"
"are set in Preferences -> Gerber Export."
msgstr ""
"Will export an Gerber Object as Gerber file,\n"
"the coordinates format, the file units and zeros\n"
"are set in Preferences -> Gerber Export."

#: appGUI/MainGUI.py:293
msgid "Backup"
msgstr "Backup"

#: appGUI/MainGUI.py:298
msgid "Import Preferences from file"
msgstr "Import Preferences from file"

#: appGUI/MainGUI.py:305
msgid "Export Preferences to file"
msgstr "Export Preferences to file"

#: appGUI/MainGUI.py:314 appGUI/preferences/PreferencesUIManager.py:1191
msgid "Save Preferences"
msgstr "Save Preferences"

#: appGUI/MainGUI.py:321 appGUI/MainGUI.py:4446
msgid "Print (PDF)"
msgstr "Print (PDF)"

#: appGUI/MainGUI.py:321 appGUI/MainGUI.py:4446
msgid "Ctrl+P"
msgstr "Ctrl+P"

#: appGUI/MainGUI.py:338 appGUI/MainGUI.py:868 appGUI/MainGUI.py:1694
msgid "Edit"
msgstr "Edit"

#: appGUI/MainGUI.py:343
msgid "Edit Object"
msgstr "Edit Object"

#: appGUI/MainGUI.py:343 appGUI/MainGUI.py:663 appGUI/MainGUI.py:767
#: appGUI/MainGUI.py:4419 appGUI/MainGUI.py:4685 appGUI/MainGUI.py:4929
msgid "E"
msgstr "E"

#: appGUI/MainGUI.py:356
msgid "Conversion"
msgstr "Conversion"

#: appGUI/MainGUI.py:360
msgid "Convert Single to MultiGeo"
msgstr "Convert Single to MultiGeo"

#: appGUI/MainGUI.py:362
msgid ""
"Will convert a Geometry object from single_geometry type\n"
"to a multi_geometry type."
msgstr ""
"Will convert a Geometry object from single_geometry type\n"
"to a multi_geometry type."

#: appGUI/MainGUI.py:367
msgid "Convert Multi to SingleGeo"
msgstr "Convert Multi to SingleGeo"

#: appGUI/MainGUI.py:369
msgid ""
"Will convert a Geometry object from multi_geometry type\n"
"to a single_geometry type."
msgstr ""
"Will convert a Geometry object from multi_geometry type\n"
"to a single_geometry type."

#: appGUI/MainGUI.py:376
msgid "Convert Any to Geo"
msgstr "Convert Any to Geo"

#: appGUI/MainGUI.py:379
msgid "Convert Any to Gerber"
msgstr "Convert Any to Gerber"

#: appGUI/MainGUI.py:382
msgid "Convert Any to Excellon"
msgstr "Convert Any to Excellon"

#: appGUI/MainGUI.py:387
msgid "Join Objects"
msgstr "Join Objects"

#: appGUI/MainGUI.py:390
msgid "Join Geo/Gerber/Exc -> Geo"
msgstr "Join Geo/Gerber/Exc -> Geo"

#: appGUI/MainGUI.py:392
msgid ""
"Merge a selection of objects, which can be of type:\n"
"- Gerber\n"
"- Excellon\n"
"- Geometry\n"
"into a new combo Geometry object."
msgstr ""
"Merge a selection of objects, which can be of type:\n"
"- Gerber\n"
"- Excellon\n"
"- Geometry\n"
"into a new combo Geometry object."

#: appGUI/MainGUI.py:400
msgid "Join Excellon(s) -> Excellon"
msgstr "Join Excellon(s) -> Excellon"

#: appGUI/MainGUI.py:402
msgid "Merge a selection of Excellon objects into a new combo Excellon object."
msgstr ""
"Merge a selection of Excellon objects into a new combo Excellon object."

#: appGUI/MainGUI.py:406
msgid "Join Gerber(s) -> Gerber"
msgstr "Join Gerber(s) -> Gerber"

#: appGUI/MainGUI.py:408
msgid "Merge a selection of Gerber objects into a new combo Gerber object."
msgstr "Merge a selection of Gerber objects into a new combo Gerber object."

#: appGUI/MainGUI.py:423 appGUI/MainGUI.py:679 appGUI/MainGUI.py:734
#: appGUI/MainGUI.py:793
msgid "DEL"
msgstr "DEL"

#: appGUI/MainGUI.py:429 appGUI/MainGUI.py:998 appGUI/MainGUI.py:2170
#: appGUI/MainGUI.py:4425
msgid "Set Origin"
msgstr "Set Origin"

#: appGUI/MainGUI.py:429 appGUI/MainGUI.py:636 appGUI/MainGUI.py:4425
#: appGUI/MainGUI.py:4692
msgid "O"
msgstr "O"

#: appGUI/MainGUI.py:432 appGUI/MainGUI.py:1000 appGUI/MainGUI.py:2172
msgid "Move to Origin"
msgstr "Move to Origin"

#: appGUI/MainGUI.py:432
msgid "Shift+O"
msgstr "Shift+O"

#: appGUI/MainGUI.py:436 appGUI/MainGUI.py:1003 appGUI/MainGUI.py:2174
msgid "Jump to Location"
msgstr "Jump to Location"

#: appGUI/MainGUI.py:436 appGUI/MainGUI.py:4421 appGUI/MainGUI.py:4687
#: appGUI/MainGUI.py:4797 appGUI/MainGUI.py:4930
msgid "J"
msgstr "J"

#: appGUI/MainGUI.py:439 appGUI/MainGUI.py:1005 appGUI/MainGUI.py:2176
#: appGUI/MainGUI.py:4457
msgid "Locate in Object"
msgstr "Locate in Object"

#: appGUI/MainGUI.py:439 appGUI/MainGUI.py:4457
msgid "Shift+J"
msgstr "Shift+J"

#: appGUI/MainGUI.py:445 app_Main.py:4463
msgid "Toggle Units"
msgstr "Toggle Units"

#: appGUI/MainGUI.py:445 appGUI/MainGUI.py:719 appGUI/MainGUI.py:4426
#: appGUI/MainGUI.py:4799
msgid "Q"
msgstr "Q"

#: appGUI/MainGUI.py:454 appGUI/MainGUI.py:1263
#: appGUI/preferences/PreferencesUIManager.py:916
#: appGUI/preferences/PreferencesUIManager.py:1009
#: appGUI/preferences/PreferencesUIManager.py:1037
#: appGUI/preferences/PreferencesUIManager.py:1142 app_Main.py:5739
#: app_Main.py:5744 app_Main.py:5759
msgid "Preferences"
msgstr "Preferences"

#: appGUI/MainGUI.py:454 appGUI/MainGUI.py:4459
msgid "Shift+P"
msgstr "Shift+P"

#: appGUI/MainGUI.py:460 appObjects/FlatCAMObj.py:488
#: appTools/ToolProperties.py:154
msgid "Options"
msgstr "Options"

#: appGUI/MainGUI.py:463
msgid "Rotate Selection"
msgstr "Rotate Selection"

#: appGUI/MainGUI.py:463
msgid "Shift+(R)"
msgstr "Shift+(R)"

#: appGUI/MainGUI.py:469 appGUI/MainGUI.py:4463
msgid "Skew on X axis"
msgstr "Skew on X axis"

#: appGUI/MainGUI.py:469 appGUI/MainGUI.py:4463 appGUI/MainGUI.py:4701
msgid "Shift+X"
msgstr "Shift+X"

#: appGUI/MainGUI.py:472 appGUI/MainGUI.py:4464
msgid "Skew on Y axis"
msgstr "Skew on Y axis"

#: appGUI/MainGUI.py:472 appGUI/MainGUI.py:4464 appGUI/MainGUI.py:4702
msgid "Shift+Y"
msgstr "Shift+Y"

#: appGUI/MainGUI.py:478
msgid "Flip on X axis"
msgstr "Flip on X axis"

#: appGUI/MainGUI.py:481
msgid "Flip on Y axis"
msgstr "Flip on Y axis"

#: appGUI/MainGUI.py:487
msgid "View source"
msgstr "View source"

#: appGUI/MainGUI.py:487 appGUI/MainGUI.py:4484
msgid "Alt+S"
msgstr "Alt+S"

#: appGUI/MainGUI.py:490 appGUI/MainGUI.py:4440
msgid "Ctrl+D"
msgstr "Ctrl+D"

#: appGUI/MainGUI.py:497 appGUI/MainGUI.py:1592
msgid "View"
msgstr "View"

#: appGUI/MainGUI.py:500 appGUI/MainGUI.py:4489
msgid "Enable all"
msgstr "Enable all"

#: appGUI/MainGUI.py:500 appGUI/MainGUI.py:4489
msgid "Alt+1"
msgstr "Alt+1"

#: appGUI/MainGUI.py:503 appGUI/MainGUI.py:4490
msgid "Disable all"
msgstr "Disable all"

#: appGUI/MainGUI.py:503 appGUI/MainGUI.py:4490
msgid "Alt+2"
msgstr "Alt+2"

#: appGUI/MainGUI.py:506
msgid "Enable non-selected"
msgstr "Enable non-selected"

#: appGUI/MainGUI.py:506 appGUI/MainGUI.py:4491
msgid "Alt+3"
msgstr "Alt+3"

#: appGUI/MainGUI.py:509
msgid "Disable non-selected"
msgstr "Disable non-selected"

#: appGUI/MainGUI.py:509 appGUI/MainGUI.py:4492
msgid "Alt+4"
msgstr "Alt+4"

#: appGUI/MainGUI.py:515 appGUI/MainGUI.py:1019 appGUI/MainGUI.py:1594
#: appGUI/MainGUI.py:2190 appGUI/MainGUI.py:4431
msgid "Zoom Fit"
msgstr "Zoom Fit"

#: appGUI/MainGUI.py:515 appGUI/MainGUI.py:4431
msgid "V"
msgstr "V"

#: appGUI/MainGUI.py:518 appGUI/MainGUI.py:1015 appGUI/MainGUI.py:2186
#: appGUI/MainGUI.py:4435
msgid "Zoom In"
msgstr "Zoom In"

#: appGUI/MainGUI.py:518 appGUI/MainGUI.py:4435
msgid "="
msgstr "="

#: appGUI/MainGUI.py:521 appGUI/MainGUI.py:1017 appGUI/MainGUI.py:2188
#: appGUI/MainGUI.py:4434
msgid "Zoom Out"
msgstr "Zoom Out"

#: appGUI/MainGUI.py:521 appGUI/MainGUI.py:4434
msgid "-"
msgstr "-"

#: appGUI/MainGUI.py:527
msgid "Redraw All"
msgstr "Redraw All"

#: appGUI/MainGUI.py:527 appGUI/MainGUI.py:4506
msgid "F5"
msgstr "F5"

#: appGUI/MainGUI.py:532 appGUI/MainGUI.py:4454
msgid "Toggle Code Editor"
msgstr "Toggle Code Editor"

#: appGUI/MainGUI.py:532 appGUI/MainGUI.py:4454
msgid "Shift+E"
msgstr "Shift+E"

#: appGUI/MainGUI.py:536
msgid "Toggle FullScreen"
msgstr "Toggle FullScreen"

#: appGUI/MainGUI.py:536 appGUI/MainGUI.py:4493
msgid "Alt+F10"
msgstr "Alt+F10"

#: appGUI/MainGUI.py:539 appGUI/MainGUI.py:4449
msgid "Toggle Plot Area"
msgstr "Toggle Plot Area"

#: appGUI/MainGUI.py:539 appGUI/MainGUI.py:4449
msgid "Ctrl+F10"
msgstr "Ctrl+F10"

#: appGUI/MainGUI.py:542
msgid "Toggle Project/Properties/Tool"
msgstr "Toggle Project/Properties/Tool"

#: appGUI/MainGUI.py:542 appGUI/MainGUI.py:4509
msgid "`"
msgstr "`"

#: appGUI/MainGUI.py:547
msgid "Toggle Grid Snap"
msgstr "Toggle Grid Snap"

#: appGUI/MainGUI.py:547 appGUI/MainGUI.py:4420
msgid "G"
msgstr "G"

#: appGUI/MainGUI.py:550 appGUI/MainGUI.py:4455
msgid "Toggle Grid Lines"
msgstr "Toggle Grid Lines"

#: appGUI/MainGUI.py:550 appGUI/MainGUI.py:4455
msgid "Shift+G"
msgstr "Shift+G"

#: appGUI/MainGUI.py:553
msgid "Toggle Axis"
msgstr "Toggle Axis"

#: appGUI/MainGUI.py:553 appGUI/MainGUI.py:4452
msgid "Shift+A"
msgstr "Shift+A"

#: appGUI/MainGUI.py:556
msgid "Toggle Workspace"
msgstr "Toggle Workspace"

#: appGUI/MainGUI.py:556 appGUI/MainGUI.py:4462
msgid "Shift+W"
msgstr "Shift+W"

#: appGUI/MainGUI.py:559 appGUI/MainGUI.py:4456
msgid "Toggle HUD"
msgstr "Toggle HUD"

#: appGUI/MainGUI.py:559 appGUI/MainGUI.py:4456
msgid "Shift+H"
msgstr "Shift+H"

#: appGUI/MainGUI.py:564
msgid "Objects"
msgstr "Objects"

#: appGUI/MainGUI.py:571 appObjects/ObjectCollection.py:1132
#: appObjects/ObjectCollection.py:1179
msgid "Deselect All"
msgstr "Deselect All"

#: appGUI/MainGUI.py:580 appGUI/MainGUI.py:1027 appGUI/MainGUI.py:1269
#: appGUI/MainGUI.py:2196
msgid "Command Line"
msgstr "Command Line"

#: appGUI/MainGUI.py:580 appGUI/MainGUI.py:666 appGUI/MainGUI.py:776
#: appGUI/MainGUI.py:4429 appGUI/MainGUI.py:4695 appGUI/MainGUI.py:4935
msgid "S"
msgstr "S"

#: appGUI/MainGUI.py:585
msgid "Help"
msgstr "Help"

#: appGUI/MainGUI.py:588
msgid "Online Help"
msgstr "Online Help"

#: appGUI/MainGUI.py:588 appGUI/MainGUI.py:4504
msgid "F1"
msgstr "F1"

#: appGUI/MainGUI.py:595 app_Main.py:3463 app_Main.py:3472
msgid "Bookmarks Manager"
msgstr "Bookmarks Manager"

#: appGUI/MainGUI.py:600
msgid "Report a bug"
msgstr "Report a bug"

#: appGUI/MainGUI.py:604
msgid "Excellon Specification"
msgstr "Excellon Specification"

#: appGUI/MainGUI.py:607
msgid "Gerber Specification"
msgstr "Gerber Specification"

#: appGUI/MainGUI.py:613
msgid "Shortcuts List"
msgstr "Shortcuts List"

#: appGUI/MainGUI.py:613 appGUI/MainGUI.py:4414
msgid "F3"
msgstr "F3"

#: appGUI/MainGUI.py:616
msgid "YouTube Channel"
msgstr "YouTube Channel"

#: appGUI/MainGUI.py:616 appGUI/MainGUI.py:4505
msgid "F4"
msgstr "F4"

#: appGUI/MainGUI.py:622 app_Main.py:3241
msgid "How To"
msgstr "How To"

#: appGUI/MainGUI.py:626 app_Main.py:2913
msgid "About"
msgstr "About"

#: appGUI/MainGUI.py:631 appGUI/MainGUI.py:1602
msgid "Geo Editor"
msgstr "Geo Editor"

#: appGUI/MainGUI.py:636 appGUI/MainGUI.py:1126 appGUI/MainGUI.py:2295
msgid "Add Circle"
msgstr "Add Circle"

#: appGUI/MainGUI.py:640 appGUI/MainGUI.py:1128 appGUI/MainGUI.py:2297
msgid "Add Arc"
msgstr "Add Arc"

#: appGUI/MainGUI.py:640 appGUI/MainGUI.py:711 appGUI/MainGUI.py:753
#: appGUI/MainGUI.py:4681 appGUI/MainGUI.py:4794 appGUI/MainGUI.py:4925
msgid "A"
msgstr "A"

#: appGUI/MainGUI.py:644 appGUI/MainGUI.py:1130 appGUI/MainGUI.py:2299
msgid "Add Rectangle"
msgstr "Add Rectangle"

#: appGUI/MainGUI.py:644 appGUI/MainGUI.py:727 appGUI/MainGUI.py:4428
#: appGUI/MainGUI.py:4694 appGUI/MainGUI.py:4800 appGUI/MainGUI.py:4934
msgid "R"
msgstr "R"

#: appGUI/MainGUI.py:648 appGUI/MainGUI.py:1136 appGUI/MainGUI.py:2305
msgid "Add Polygon"
msgstr "Add Polygon"

#: appGUI/MainGUI.py:652 appGUI/MainGUI.py:1134 appGUI/MainGUI.py:2303
msgid "Add Path"
msgstr "Add Path"

#: appGUI/MainGUI.py:652 appGUI/MainGUI.py:750 appGUI/MainGUI.py:4427
#: appGUI/MainGUI.py:4693 appGUI/MainGUI.py:4933 appGUI/ObjectUI.py:2034
#: appGUI/ObjectUI.py:2045
msgid "P"
msgstr "P"

#: appGUI/MainGUI.py:656 appGUI/MainGUI.py:1139 appGUI/MainGUI.py:2308
msgid "Add Text"
msgstr "Add Text"

#: appGUI/MainGUI.py:656 appGUI/MainGUI.py:756 appGUI/MainGUI.py:4430
#: appGUI/MainGUI.py:4696 appGUI/MainGUI.py:4801 appGUI/MainGUI.py:4936
#: appGUI/MainGUI.py:4937
msgid "T"
msgstr "T"

#: appGUI/MainGUI.py:660 appGUI/MainGUI.py:1149 appGUI/MainGUI.py:2318
msgid "Polygon Union"
msgstr "Polygon Union"

#: appGUI/MainGUI.py:660 appGUI/MainGUI.py:4697
msgid "U"
msgstr "U"

#: appGUI/MainGUI.py:663 appGUI/MainGUI.py:1154 appGUI/MainGUI.py:2323
msgid "Polygon Intersection"
msgstr "Polygon Intersection"

#: appGUI/MainGUI.py:666 appGUI/MainGUI.py:1156 appGUI/MainGUI.py:2325
msgid "Polygon Subtraction"
msgstr "Polygon Subtraction"

#: appGUI/MainGUI.py:671 appGUI/MainGUI.py:1160 appGUI/MainGUI.py:2329
msgid "Cut Path"
msgstr "Cut Path"

#: appGUI/MainGUI.py:676
msgid "Copy Geom"
msgstr "Copy Geom"

#: appGUI/MainGUI.py:676 appGUI/MainGUI.py:731 appGUI/MainGUI.py:790
#: appGUI/MainGUI.py:4683 appGUI/MainGUI.py:4795 appGUI/MainGUI.py:4927
msgid "C"
msgstr "C"

#: appGUI/MainGUI.py:679 appGUI/MainGUI.py:2333 appGUI/MainGUI.py:4712
msgid "Delete Shape"
msgstr "Delete Shape"

#: appGUI/MainGUI.py:684 appGUI/MainGUI.py:798 appGUI/MainGUI.py:1213
#: appGUI/MainGUI.py:1639 appGUI/MainGUI.py:1701 appGUI/MainGUI.py:2381
#: appGUI/MainGUI.py:4931 appTools/ToolMove.py:27
msgid "Move"
msgstr "Move"

#: appGUI/MainGUI.py:684 appGUI/MainGUI.py:740 appGUI/MainGUI.py:798
#: appGUI/MainGUI.py:4423 appGUI/MainGUI.py:4689 appGUI/MainGUI.py:4690
#: appGUI/MainGUI.py:4798 appGUI/MainGUI.py:4931
msgid "M"
msgstr "M"

#: appGUI/MainGUI.py:691 appGUI/MainGUI.py:4686
msgid "I"
msgstr "I"

#: appGUI/MainGUI.py:695 appGUI/MainGUI.py:785 appGUI/MainGUI.py:4483
#: appGUI/MainGUI.py:4703 appGUI/MainGUI.py:4946
msgid "Alt+R"
msgstr "Alt+R"

#: appGUI/MainGUI.py:700 appGUI/MainGUI.py:4688
msgid "Toggle Corner Snap"
msgstr "Toggle Corner Snap"

#: appGUI/MainGUI.py:700 appGUI/MainGUI.py:4688
msgid "K"
msgstr "K"

#: appGUI/MainGUI.py:714 appGUI/MainGUI.py:1677 appGUI/MainGUI.py:4796
msgid "Add Drill"
msgstr "Add Drill"

#: appGUI/MainGUI.py:719 appGUI/MainGUI.py:1106 appGUI/MainGUI.py:1684
#: appGUI/MainGUI.py:2277 appGUI/MainGUI.py:4799
msgid "Add Slot Array"
msgstr "Add Slot Array"

#: appGUI/MainGUI.py:722 appGUI/MainGUI.py:1104 appGUI/MainGUI.py:1682
#: appGUI/MainGUI.py:2275 appGUI/MainGUI.py:4802
msgid "Add Slot"
msgstr "Add Slot"

#: appGUI/MainGUI.py:722 appGUI/MainGUI.py:4802
msgid "W"
msgstr "W"

#: appGUI/MainGUI.py:727
msgid "Resize Drill(S)"
msgstr "Resize Drill(S)"

#: appGUI/MainGUI.py:740 appGUI/MainGUI.py:4798
msgid "Move Drill(s)"
msgstr "Move Drill(s)"

#: appGUI/MainGUI.py:750 appGUI/MainGUI.py:1178 appGUI/MainGUI.py:2347
#: appGUI/MainGUI.py:4933
msgid "Add Pad"
msgstr "Add Pad"

#: appGUI/MainGUI.py:756 appGUI/MainGUI.py:1182 appGUI/MainGUI.py:2351
#: appGUI/MainGUI.py:4936
msgid "Add Track"
msgstr "Add Track"

#: appGUI/MainGUI.py:759 appGUI/MainGUI.py:1184 appGUI/MainGUI.py:2353
#: appGUI/MainGUI.py:4932
msgid "Add Region"
msgstr "Add Region"

#: appGUI/MainGUI.py:764 appGUI/MainGUI.py:1186 appGUI/MainGUI.py:1654
#: appGUI/MainGUI.py:2355
msgid "Poligonize"
msgstr "Poligonize"

#: appGUI/MainGUI.py:764 appGUI/MainGUI.py:4479 appGUI/MainGUI.py:4945
msgid "Alt+N"
msgstr "Alt+N"

#: appGUI/MainGUI.py:767 appGUI/MainGUI.py:4929
msgid "Add SemiDisc"
msgstr "Add SemiDisc"

#: appGUI/MainGUI.py:770 appGUI/MainGUI.py:4928
msgid "Add Disc"
msgstr "Add Disc"

#: appGUI/MainGUI.py:779 appGUI/MainGUI.py:1199 appGUI/MainGUI.py:1666
#: appGUI/MainGUI.py:2368
msgid "Mark Area"
msgstr "Mark Area"

#: appGUI/MainGUI.py:779 appGUI/MainGUI.py:4467 appGUI/MainGUI.py:4944
msgid "Alt+A"
msgstr "Alt+A"

#: appGUI/MainGUI.py:782 appGUI/MainGUI.py:1145 appGUI/MainGUI.py:1202
#: appGUI/MainGUI.py:1623 appGUI/MainGUI.py:1668 appGUI/MainGUI.py:2314
#: appGUI/MainGUI.py:2370
msgid "Eraser"
msgstr "Eraser"

#: appGUI/MainGUI.py:785 app_Main.py:6120 app_Main.py:6172 app_Main.py:6210
msgid "Transform"
msgstr "Transform"

#: appGUI/MainGUI.py:815
msgid "Enable Plot"
msgstr "Enable Plot"

#: appGUI/MainGUI.py:817
msgid "Disable Plot"
msgstr "Disable Plot"

#: appGUI/MainGUI.py:821
msgid "Set Color"
msgstr "Set Color"

#: appGUI/MainGUI.py:824 app_Main.py:7978
msgid "Red"
msgstr "Red"

#: appGUI/MainGUI.py:827 app_Main.py:7980
msgid "Blue"
msgstr "Blue"

#: appGUI/MainGUI.py:830 app_Main.py:7983
msgid "Yellow"
msgstr "Yellow"

#: appGUI/MainGUI.py:833 app_Main.py:7985
msgid "Green"
msgstr "Green"

#: appGUI/MainGUI.py:836 app_Main.py:7987
msgid "Purple"
msgstr "Purple"

#: appGUI/MainGUI.py:839 app_Main.py:7989
msgid "Brown"
msgstr "Brown"

#: appGUI/MainGUI.py:842 app_Main.py:7991 app_Main.py:8051
msgid "White"
msgstr "White"

#: appGUI/MainGUI.py:845 app_Main.py:7993
msgid "Black"
msgstr "Black"

#: appGUI/MainGUI.py:850 app_Main.py:7996
msgid "Custom"
msgstr "Custom"

#: appGUI/MainGUI.py:855 app_Main.py:8030
msgid "Opacity"
msgstr "Opacity"

#: appGUI/MainGUI.py:858 app_Main.py:8006
msgid "Default"
msgstr "Default"

#: appGUI/MainGUI.py:863
msgid "Generate CNC"
msgstr "Generate CNC"

#: appGUI/MainGUI.py:865
msgid "View Source"
msgstr "View Source"

#: appGUI/MainGUI.py:878 appGUI/MainGUI.py:1351 appGUI/MainGUI.py:1703
#: appTools/ToolProperties.py:31 app_Main.py:2449 app_Main.py:2682
msgid "Properties"
msgstr "Properties"

#: appGUI/MainGUI.py:907
msgid "File Toolbar"
msgstr "File Toolbar"

#: appGUI/MainGUI.py:911
msgid "Edit Toolbar"
msgstr "Edit Toolbar"

#: appGUI/MainGUI.py:915
msgid "View Toolbar"
msgstr "View Toolbar"

#: appGUI/MainGUI.py:919
msgid "Shell Toolbar"
msgstr "Shell Toolbar"

#: appGUI/MainGUI.py:923
msgid "Tools Toolbar"
msgstr "Tools Toolbar"

#: appGUI/MainGUI.py:927
msgid "Excellon Editor Toolbar"
msgstr "Excellon Editor Toolbar"

#: appGUI/MainGUI.py:933
msgid "Geometry Editor Toolbar"
msgstr "Geometry Editor Toolbar"

#: appGUI/MainGUI.py:937
msgid "Gerber Editor Toolbar"
msgstr "Gerber Editor Toolbar"

#: appGUI/MainGUI.py:942 appGUI/MainGUI.py:2013
msgid "Delta Coordinates Toolbar"
msgstr "Delta Coordinates Toolbar"

#: appGUI/MainGUI.py:945 appGUI/MainGUI.py:2021
msgid "Coordinates Toolbar"
msgstr "Coordinates Toolbar"

#: appGUI/MainGUI.py:948 appGUI/MainGUI.py:2029
msgid "Grid Toolbar"
msgstr "Grid Toolbar"

#: appGUI/MainGUI.py:957 appGUI/MainGUI.py:2037
msgid "Status Toolbar"
msgstr "Status Toolbar"

#: appGUI/MainGUI.py:974 appGUI/MainGUI.py:2145
msgid "Open project"
msgstr "Open project"

#: appGUI/MainGUI.py:976 appGUI/MainGUI.py:2147
msgid "Save project"
msgstr "Save project"

#: appGUI/MainGUI.py:982 appGUI/MainGUI.py:2153 app_Main.py:2452
#: app_Main.py:2680
msgid "Editor"
msgstr "Editor"

#: appGUI/MainGUI.py:984 appGUI/MainGUI.py:2156
msgid "Save Object and close the Editor"
msgstr "Save Object and close the Editor"

#: appGUI/MainGUI.py:994 appGUI/MainGUI.py:2166 appGUI/MainGUI.py:4443
#: appGUI/MainGUI.py:4706 appTools/ToolDistance.py:100
#: appTools/ToolDistance.py:545
msgid "Distance Tool"
msgstr "Distance Tool"

#: appGUI/MainGUI.py:996 appGUI/MainGUI.py:2168
msgid "Distance Min Tool"
msgstr "Distance Min Tool"

#: appGUI/MainGUI.py:1011 appGUI/MainGUI.py:1598 appGUI/MainGUI.py:2182
msgid "Replot"
msgstr "Replot"

#: appGUI/MainGUI.py:1013 appGUI/MainGUI.py:2184
msgid "Clear plot"
msgstr "Clear plot"

#: appGUI/MainGUI.py:1029 appGUI/MainGUI.py:2198
msgid "New Script ..."
msgstr "New Script ..."

#: appGUI/MainGUI.py:1031 appGUI/MainGUI.py:2200
msgid "Open Script ..."
msgstr "Open Script ..."

#: appGUI/MainGUI.py:1039 appGUI/MainGUI.py:2208
msgid "2Sided Tool"
msgstr "2Sided Tool"

#: appGUI/MainGUI.py:1041 appGUI/MainGUI.py:2210 appGUI/MainGUI.py:4467
msgid "Align Objects Tool"
msgstr "Align Objects Tool"

#: appGUI/MainGUI.py:1043 appGUI/MainGUI.py:2212 appGUI/MainGUI.py:4470
#: appTools/ToolExtractDrills.py:98
msgid "Extract Drills Tool"
msgstr "Extract Drills Tool"

#: appGUI/MainGUI.py:1046 appGUI/MainGUI.py:2215 appGUI/ObjectUI.py:387
#: appTools/ToolCutOut.py:156 appTools/ToolCutOut.py:2069
msgid "Cutout Tool"
msgstr "Cutout Tool"

#: appGUI/MainGUI.py:1048 appGUI/MainGUI.py:2217 appGUI/ObjectUI.py:372
#: appGUI/ObjectUI.py:1824 appTools/ToolNCC.py:202
msgid "NCC Tool"
msgstr "NCC Tool"

#: appGUI/MainGUI.py:1052 appGUI/MainGUI.py:2221 appGUI/MainGUI.py:4474
#: appTools/ToolIsolation.py:192 appTools/ToolIsolation.py:3043
msgid "Isolation Tool"
msgstr "Isolation Tool"

#: appGUI/MainGUI.py:1054 appGUI/MainGUI.py:2223 appGUI/ObjectUI.py:721
#: appTools/ToolDrilling.py:245 appTools/ToolDrilling.py:1979
#: appTools/ToolMilling.py:169
msgid "Drilling Tool"
msgstr "Drilling Tool"

#: appGUI/MainGUI.py:1058 appGUI/MainGUI.py:2227
msgid "Panel Tool"
msgstr "Panel Tool"

#: appGUI/MainGUI.py:1060 appGUI/MainGUI.py:2229 appTools/ToolFilm.py:110
msgid "Film Tool"
msgstr "Film Tool"

#: appGUI/MainGUI.py:1062 appGUI/MainGUI.py:2231
#: appTools/ToolSolderPaste.py:116
msgid "SolderPaste Tool"
msgstr "SolderPaste Tool"

#: appGUI/MainGUI.py:1064 appGUI/MainGUI.py:2233 appGUI/MainGUI.py:4486
#: appTools/ToolSub.py:648
msgid "Subtract Tool"
msgstr "Subtract Tool"

#: appGUI/MainGUI.py:1066 appGUI/MainGUI.py:2235 appTools/ToolRulesCheck.py:115
msgid "Rules Tool"
msgstr "Rules Tool"

#: appGUI/MainGUI.py:1068 appGUI/MainGUI.py:2237 appGUI/MainGUI.py:4480
#: appTools/ToolOptimal.py:103 appTools/ToolOptimal.py:390
msgid "Optimal Tool"
msgstr "Optimal Tool"

#: appGUI/MainGUI.py:1073 appGUI/MainGUI.py:2242 appGUI/MainGUI.py:4468
msgid "Calculators Tool"
msgstr "Calculators Tool"

#: appGUI/MainGUI.py:1077 appGUI/MainGUI.py:2246 appGUI/MainGUI.py:4482
#: appTools/ToolQRCode.py:114 appTools/ToolQRCode.py:635
msgid "QRCode Tool"
msgstr "QRCode Tool"

#: appGUI/MainGUI.py:1079 appGUI/MainGUI.py:2248 appGUI/MainGUI.py:4475
#: appTools/ToolCopperThieving.py:126 appTools/ToolCopperThieving.py:1211
msgid "Copper Thieving Tool"
msgstr "Copper Thieving Tool"

#: appGUI/MainGUI.py:1082 appGUI/MainGUI.py:2251 appGUI/MainGUI.py:4471
#: appTools/ToolFiducials.py:117 appTools/ToolFiducials.py:677
msgid "Fiducials Tool"
msgstr "Fiducials Tool"

#: appGUI/MainGUI.py:1084 appGUI/MainGUI.py:2253
#: appTools/ToolCalibration.py:115 appTools/ToolCalibration.py:735
msgid "Calibration Tool"
msgstr "Calibration Tool"

#: appGUI/MainGUI.py:1086 appGUI/MainGUI.py:2255 appGUI/MainGUI.py:4473
msgid "Punch Gerber Tool"
msgstr "Punch Gerber Tool"

#: appGUI/MainGUI.py:1088 appGUI/MainGUI.py:2257 appGUI/MainGUI.py:4472
#: appTools/ToolInvertGerber.py:172
msgid "Invert Gerber Tool"
msgstr "Invert Gerber Tool"

#: appGUI/MainGUI.py:1090 appGUI/MainGUI.py:2259 appGUI/MainGUI.py:4478
#: appTools/ToolCorners.py:455
msgid "Corner Markers Tool"
msgstr "Corner Markers Tool"

#: appGUI/MainGUI.py:1092 appGUI/MainGUI.py:2261
#: appTools/ToolEtchCompensation.py:80 appTools/ToolEtchCompensation.py:251
msgid "Etch Compensation Tool"
msgstr "Etch Compensation Tool"

#: appGUI/MainGUI.py:1098 appGUI/MainGUI.py:1124 appGUI/MainGUI.py:1176
#: appGUI/MainGUI.py:2267 appGUI/MainGUI.py:2345
msgid "Select"
msgstr "Select"

#: appGUI/MainGUI.py:1100 appGUI/MainGUI.py:2269
msgid "Add Drill Hole"
msgstr "Add Drill Hole"

#: appGUI/MainGUI.py:1102 appGUI/MainGUI.py:2271
msgid "Add Drill Hole Array"
msgstr "Add Drill Hole Array"

#: appGUI/MainGUI.py:1108 appGUI/MainGUI.py:1687 appGUI/MainGUI.py:2273
msgid "Resize Drill"
msgstr "Resize Drill"

#: appGUI/MainGUI.py:1112 appGUI/MainGUI.py:2281
msgid "Copy Drill"
msgstr "Copy Drill"

#: appGUI/MainGUI.py:1114 appGUI/MainGUI.py:2283
msgid "Delete Drill"
msgstr "Delete Drill"

#: appGUI/MainGUI.py:1118 appGUI/MainGUI.py:2287
msgid "Move Drill"
msgstr "Move Drill"

#: appGUI/MainGUI.py:1141 appGUI/MainGUI.py:2310
msgid "Add Buffer"
msgstr "Add Buffer"

#: appGUI/MainGUI.py:1143 appGUI/MainGUI.py:2312
msgid "Paint Shape"
msgstr "Paint Shape"

#: appGUI/MainGUI.py:1151 appGUI/MainGUI.py:2320
msgid "Polygon Explode"
msgstr "Polygon Explode"

#: appGUI/MainGUI.py:1162
msgid "Copy Shape(s)"
msgstr "Copy Shape(s)"

#: appGUI/MainGUI.py:1165
msgid "Delete Shape '-'"
msgstr "Delete Shape '-'"

#: appGUI/MainGUI.py:1167 appGUI/MainGUI.py:1210 appGUI/MainGUI.py:1635
#: appGUI/MainGUI.py:1672 appGUI/MainGUI.py:2335 appGUI/MainGUI.py:2378
#: appGUI/ObjectUI.py:109 appGUI/ObjectUI.py:152
msgid "Transformations"
msgstr "Transformations"

#: appGUI/MainGUI.py:1170
msgid "Move Objects "
msgstr "Move Objects "

#: appGUI/MainGUI.py:1189 appGUI/MainGUI.py:1656 appGUI/MainGUI.py:2358
msgid "SemiDisc"
msgstr "SemiDisc"

#: appGUI/MainGUI.py:1191 appGUI/MainGUI.py:1658 appGUI/MainGUI.py:2360
msgid "Disc"
msgstr "Disc"

#: appGUI/MainGUI.py:1221
msgid "Snap to grid"
msgstr "Snap to grid"

#: appGUI/MainGUI.py:1224
msgid "Grid X snapping distance"
msgstr "Grid X snapping distance"

#: appGUI/MainGUI.py:1229
msgid ""
"When active, value on Grid_X\n"
"is copied to the Grid_Y value."
msgstr ""
"When active, value on Grid_X\n"
"is copied to the Grid_Y value."

#: appGUI/MainGUI.py:1236
msgid "Grid Y snapping distance"
msgstr "Grid Y snapping distance"

#: appGUI/MainGUI.py:1243
msgid "Snap to corner"
msgstr "Snap to corner"

#: appGUI/MainGUI.py:1247 appGUI/preferences/general/GeneralAPPSetGroupUI.py:78
msgid "Max. magnet distance"
msgstr "Max. magnet distance"

#: appGUI/MainGUI.py:1257
msgid "Toggle the display of axis on canvas"
msgstr "Toggle the display of axis on canvas"

#: appGUI/MainGUI.py:1275
msgid "HUD (Heads up display)"
msgstr "HUD (Heads up display)"

#: appGUI/MainGUI.py:1281 appGUI/preferences/general/GeneralAPPSetGroupUI.py:97
msgid ""
"Draw a delimiting rectangle on canvas.\n"
"The purpose is to illustrate the limits for our work."
msgstr ""
"Draw a delimiting rectangle on canvas.\n"
"The purpose is to illustrate the limits for our work."

#: appGUI/MainGUI.py:1294
msgid ""
"Relative measurement.\n"
"Reference is last click position"
msgstr ""
"Relative measurement.\n"
"Reference is last click position"

#: appGUI/MainGUI.py:1302
msgid ""
"Absolute measurement.\n"
"Reference is (X=0, Y= 0) position"
msgstr ""
"Absolute measurement.\n"
"Reference is (X=0, Y= 0) position"

#: appGUI/MainGUI.py:1309
msgid "TCL Shell"
msgstr "TCL Shell"

#: appGUI/MainGUI.py:1336 appGUI/MainGUI.py:1585 app_Main.py:2455
#: app_Main.py:2685 app_Main.py:9290
msgid "Project"
msgstr "Project"

#: appGUI/MainGUI.py:1379 appGUI/MainGUI.py:1387 appGUI/MainGUI.py:3934
#: appGUI/MainGUI.py:3940 app_Main.py:2693 app_Main.py:9098
msgid "Plot Area"
msgstr "Plot Area"

#: appGUI/MainGUI.py:1429 appTools/ToolCopperThieving.py:1243
#: appTools/ToolCorners.py:475 appTools/ToolEtchCompensation.py:291
#: appTools/ToolExtractDrills.py:454 appTools/ToolFiducials.py:902
#: appTools/ToolInvertGerber.py:212 appTools/ToolIsolation.py:3091
#: appTools/ToolOptimal.py:421 appTools/ToolPunchGerber.py:1010
#: appTools/ToolQRCode.py:666 appTools/ToolRulesCheck.py:1171
#: appTools/ToolSolderPaste.py:1144 appTools/ToolSub.py:694
msgid "GERBER"
msgstr "GERBER"

#: appGUI/MainGUI.py:1439 appTools/ToolDrilling.py:2032
#: appTools/ToolMilling.py:1637 appTools/ToolRulesCheck.py:1309
msgid "EXCELLON"
msgstr "EXCELLON"

#: appGUI/MainGUI.py:1449 appTools/ToolSub.py:747
msgid "GEOMETRY"
msgstr "GEOMETRY"

#: appGUI/MainGUI.py:1459
msgid "CNC-JOB"
msgstr "CNC-JOB"

#: appGUI/MainGUI.py:1468 appGUI/ObjectUI.py:353 appGUI/ObjectUI.py:717
#: appGUI/ObjectUI.py:1785
msgid "TOOLS"
msgstr "TOOLS"

#: appGUI/MainGUI.py:1477
msgid "TOOLS 2"
msgstr "TOOLS 2"

#: appGUI/MainGUI.py:1487
msgid "UTILITIES"
msgstr "UTILITIES"

#: appGUI/MainGUI.py:1503
#: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:201
msgid "Restore Defaults"
msgstr "Restore Defaults"

#: appGUI/MainGUI.py:1507
msgid ""
"Restore the entire set of default values\n"
"to the initial values loaded after first launch."
msgstr ""
"Restore the entire set of default values\n"
"to the initial values loaded after first launch."

#: appGUI/MainGUI.py:1512
msgid "Open Pref Folder"
msgstr "Open Pref Folder"

#: appGUI/MainGUI.py:1516
msgid "Open the folder where FlatCAM save the preferences files."
msgstr "Open the folder where FlatCAM save the preferences files."

#: appGUI/MainGUI.py:1520 appGUI/MainGUI.py:2110
msgid "Clear GUI Settings"
msgstr "Clear GUI Settings"

#: appGUI/MainGUI.py:1525
msgid ""
"Clear the GUI settings for FlatCAM,\n"
"such as: layout, gui state, style, hdpi support etc."
msgstr ""
"Clear the GUI settings for FlatCAM,\n"
"such as: layout, gui state, style, hdpi support etc."

#: appGUI/MainGUI.py:1540
msgid "Apply the current preferences without saving to a file."
msgstr "Apply the current preferences without saving to a file."

#: appGUI/MainGUI.py:1548
msgid ""
"Save the current settings in the 'current_defaults' file\n"
"which is the file storing the working default preferences."
msgstr ""
"Save the current settings in the 'current_defaults' file\n"
"which is the file storing the working default preferences."

#: appGUI/MainGUI.py:1556
msgid "Will not save the changes and will close the preferences window."
msgstr "Will not save the changes and will close the preferences window."

#: appGUI/MainGUI.py:1570
msgid "Toggle Visibility"
msgstr "Toggle Visibility"

#: appGUI/MainGUI.py:1589
msgid "Grids"
msgstr "Grids"

#: appGUI/MainGUI.py:1596
msgid "Clear Plot"
msgstr "Clear Plot"

#: appGUI/MainGUI.py:1604
msgid "Path"
msgstr "Path"

#: appGUI/MainGUI.py:1606
msgid "Rectangle"
msgstr "Rectangle"

#: appGUI/MainGUI.py:1609
msgid "Circle"
msgstr "Circle"

#: appGUI/MainGUI.py:1613
msgid "Arc"
msgstr "Arc"

#: appGUI/MainGUI.py:1627
msgid "Union"
msgstr "Union"

#: appGUI/MainGUI.py:1629
msgid "Intersection"
msgstr "Intersection"

#: appGUI/MainGUI.py:1631
msgid "Subtraction"
msgstr "Subtraction"

#: appGUI/MainGUI.py:1644
msgid "Pad"
msgstr "Pad"

#: appGUI/MainGUI.py:1646
msgid "Pad Array"
msgstr "Pad Array"

#: appGUI/MainGUI.py:1650
msgid "Track"
msgstr "Track"

#: appGUI/MainGUI.py:1652
msgid "Region"
msgstr "Region"

#: appGUI/MainGUI.py:1675
msgid "Exc Editor"
msgstr "Exc Editor"

#: appGUI/MainGUI.py:1727
msgid "Application units"
msgstr "Application units"

#: appGUI/MainGUI.py:1822
msgid "Lock Toolbars"
msgstr "Lock Toolbars"

#: appGUI/MainGUI.py:1990
msgid "Detachable Tabs"
msgstr "Detachable Tabs"

#: appGUI/MainGUI.py:2090
msgid "FlatCAM Preferences Folder opened."
msgstr "FlatCAM Preferences Folder opened."

#: appGUI/MainGUI.py:2109
msgid "Are you sure you want to delete the GUI Settings? \n"
msgstr "Are you sure you want to delete the GUI Settings? \n"

#: appGUI/MainGUI.py:2114 appGUI/preferences/PreferencesUIManager.py:948
#: appGUI/preferences/PreferencesUIManager.py:1195 appTranslation.py:111
#: appTranslation.py:213 app_Main.py:2498 app_Main.py:3525 app_Main.py:5980
#: app_Main.py:8996
msgid "Yes"
msgstr "Yes"

#: appGUI/MainGUI.py:2115 appGUI/preferences/PreferencesUIManager.py:1196
#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:49
#: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:62
#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:164
#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:148
#: appTools/ToolDrilling.py:2090 appTools/ToolIsolation.py:3171
#: appTools/ToolMilling.py:1695 appTools/ToolNCC.py:4048
#: appTools/ToolPaint.py:2869 appTranslation.py:112 appTranslation.py:214
#: app_Main.py:2499 app_Main.py:3526 app_Main.py:5981 app_Main.py:8997
msgid "No"
msgstr "No"

#: appGUI/MainGUI.py:2293
msgid "Select 'Esc'"
msgstr "Select 'Esc'"

#: appGUI/MainGUI.py:2331
msgid "Copy Objects"
msgstr "Copy Objects"

#: appGUI/MainGUI.py:2339
msgid "Move Objects"
msgstr "Move Objects"

#: appGUI/MainGUI.py:2933
msgid ""
"Please first select a geometry item to be cutted\n"
"then select the geometry item that will be cutted\n"
"out of the first item. In the end press ~X~ key or\n"
"the toolbar button."
msgstr ""
"Please first select a geometry item to be cutted\n"
"then select the geometry item that will be cutted\n"
"out of the first item. In the end press ~X~ key or\n"
"the toolbar button."

#: appGUI/MainGUI.py:2940 appGUI/MainGUI.py:3104 appGUI/MainGUI.py:3151
#: appGUI/MainGUI.py:3173
msgid "Warning"
msgstr "Warning"

#: appGUI/MainGUI.py:3099
msgid ""
"Please select geometry items \n"
"on which to perform Intersection Tool."
msgstr ""
"Please select geometry items \n"
"on which to perform Intersection Tool."

#: appGUI/MainGUI.py:3146
msgid ""
"Please select geometry items \n"
"on which to perform Substraction Tool."
msgstr ""
"Please select geometry items \n"
"on which to perform Substraction Tool."

#: appGUI/MainGUI.py:3168
msgid ""
"Please select geometry items \n"
"on which to perform union."
msgstr ""
"Please select geometry items \n"
"on which to perform union."

#: appGUI/MainGUI.py:3253 appGUI/MainGUI.py:3468
msgid "Cancelled. Nothing selected to delete."
msgstr "Cancelled. Nothing selected to delete."

#: appGUI/MainGUI.py:3337 appGUI/MainGUI.py:3584
msgid "Cancelled. Nothing selected to copy."
msgstr "Cancelled. Nothing selected to copy."

#: appGUI/MainGUI.py:3383
msgid "Cancelled. Nothing selected to move."
msgstr "Cancelled. Nothing selected to move."

#: appGUI/MainGUI.py:3639
msgid "New Tool ..."
msgstr "New Tool ..."

#: appGUI/MainGUI.py:3640 appTools/ToolIsolation.py:789 appTools/ToolNCC.py:460
#: appTools/ToolPaint.py:385 appTools/ToolSolderPaste.py:123 app_Main.py:4612
msgid "Enter a Tool Diameter"
msgstr "Enter a Tool Diameter"

#: appGUI/MainGUI.py:3652
msgid "Adding Tool cancelled ..."
msgstr "Adding Tool cancelled ..."

#: appGUI/MainGUI.py:3682
msgid "Distance Tool exit..."
msgstr "Distance Tool exit..."

#: appGUI/MainGUI.py:3862 app_Main.py:3513
msgid "Application is saving the project. Please wait ..."
msgstr "Application is saving the project. Please wait ..."

#: appGUI/MainGUI.py:4001
msgid "Shell enabled."
msgstr "Shell enabled."

#: appGUI/MainGUI.py:4004
msgid "Shell disabled."
msgstr "Shell disabled."

#: appGUI/MainGUI.py:4018
msgid "<b>Shortcut Key List</b>"
msgstr "<b>Shortcut Key List</b>"

#: appGUI/MainGUI.py:4413
msgid "General Shortcut list"
msgstr "General Shortcut list"

#: appGUI/MainGUI.py:4414
msgid "SHOW SHORTCUT LIST"
msgstr "SHOW SHORTCUT LIST"

#: appGUI/MainGUI.py:4415
msgid "1"
msgstr "1"

#: appGUI/MainGUI.py:4415
msgid "Switch to Project Tab"
msgstr "Switch to Project Tab"

#: appGUI/MainGUI.py:4416
msgid "2"
msgstr "2"

#: appGUI/MainGUI.py:4416
msgid "Switch to Selected Tab"
msgstr "Switch to Selected Tab"

#: appGUI/MainGUI.py:4417
msgid "3"
msgstr "3"

#: appGUI/MainGUI.py:4417
msgid "Switch to Tool Tab"
msgstr "Switch to Tool Tab"

#: appGUI/MainGUI.py:4418
msgid "New Gerber"
msgstr "New Gerber"

#: appGUI/MainGUI.py:4419
msgid "Edit Object (if selected)"
msgstr "Edit Object (if selected)"

#: appGUI/MainGUI.py:4420 app_Main.py:6282
msgid "Grid On/Off"
msgstr "Grid On/Off"

#: appGUI/MainGUI.py:4421
msgid "Jump to Coordinates"
msgstr "Jump to Coordinates"

#: appGUI/MainGUI.py:4422
msgid "New Excellon"
msgstr "New Excellon"

#: appGUI/MainGUI.py:4423
msgid "Move Obj"
msgstr "Move Obj"

#: appGUI/MainGUI.py:4424
msgid "New Geometry"
msgstr "New Geometry"

#: appGUI/MainGUI.py:4426
msgid "Change Units"
msgstr "Change Units"

#: appGUI/MainGUI.py:4427
msgid "Open Properties Tool"
msgstr "Open Properties Tool"

#: appGUI/MainGUI.py:4428
msgid "Rotate by 90 degree CW"
msgstr "Rotate by 90 degree CW"

#: appGUI/MainGUI.py:4429
msgid "Shell Toggle"
msgstr "Shell Toggle"

#: appGUI/MainGUI.py:4430
msgid ""
"Add a Tool (when in Geometry Selected Tab or in Tools NCC or Tools Paint)"
msgstr ""
"Add a Tool (when in Geometry Selected Tab or in Tools NCC or Tools Paint)"

#: appGUI/MainGUI.py:4432
msgid "Flip on X_axis"
msgstr "Flip on X_axis"

#: appGUI/MainGUI.py:4433
msgid "Flip on Y_axis"
msgstr "Flip on Y_axis"

#: appGUI/MainGUI.py:4439
msgid "Copy Obj"
msgstr "Copy Obj"

#: appGUI/MainGUI.py:4440
msgid "Open Tools Database"
msgstr "Open Tools Database"

#: appGUI/MainGUI.py:4441
msgid "Open Excellon File"
msgstr "Open Excellon File"

#: appGUI/MainGUI.py:4442
msgid "Open Gerber File"
msgstr "Open Gerber File"

#: appGUI/MainGUI.py:4443 appGUI/MainGUI.py:4706
msgid "Ctrl+M"
msgstr "Ctrl+M"

#: appGUI/MainGUI.py:4447
msgid "Ctrl+Q"
msgstr "Ctrl+Q"

#: appGUI/MainGUI.py:4447 appTools/ToolPDF.py:41
msgid "PDF Import Tool"
msgstr "PDF Import Tool"

#: appGUI/MainGUI.py:4452
msgid "Toggle the axis"
msgstr "Toggle the axis"

#: appGUI/MainGUI.py:4453
msgid "Shift+C"
msgstr "Shift+C"

#: appGUI/MainGUI.py:4453
msgid "Copy Obj_Name"
msgstr "Copy Obj_Name"

#: appGUI/MainGUI.py:4458 appGUI/MainGUI.py:4700 appGUI/MainGUI.py:4803
#: appGUI/MainGUI.py:4941
msgid "Shift+M"
msgstr "Shift+M"

#: appGUI/MainGUI.py:4458 appGUI/MainGUI.py:4700 appGUI/MainGUI.py:4803
#: appGUI/MainGUI.py:4941
msgid "Distance Minimum Tool"
msgstr "Distance Minimum Tool"

#: appGUI/MainGUI.py:4459
msgid "Open Preferences Window"
msgstr "Open Preferences Window"

#: appGUI/MainGUI.py:4460
msgid "Shift+R"
msgstr "Shift+R"

#: appGUI/MainGUI.py:4460
msgid "Rotate by 90 degree CCW"
msgstr "Rotate by 90 degree CCW"

#: appGUI/MainGUI.py:4461
msgid "Run a Script"
msgstr "Run a Script"

#: appGUI/MainGUI.py:4462
msgid "Toggle the workspace"
msgstr "Toggle the workspace"

#: appGUI/MainGUI.py:4468
msgid "Alt+C"
msgstr "Alt+C"

#: appGUI/MainGUI.py:4469
msgid "Alt+D"
msgstr "Alt+D"

#: appGUI/MainGUI.py:4469
msgid "2-Sided PCB Tool"
msgstr "2-Sided PCB Tool"

#: appGUI/MainGUI.py:4470
msgid "Alt+E"
msgstr "Alt+E"

#: appGUI/MainGUI.py:4471
msgid "Alt+F"
msgstr "Alt+F"

#: appGUI/MainGUI.py:4472
msgid "Alt+G"
msgstr "Alt+G"

#: appGUI/MainGUI.py:4473
msgid "Alt+H"
msgstr "Alt+H"

#: appGUI/MainGUI.py:4474
msgid "Alt+I"
msgstr "Alt+I"

#: appGUI/MainGUI.py:4475
msgid "Alt+J"
msgstr "Alt+J"

#: appGUI/MainGUI.py:4476
msgid "Alt+K"
msgstr "Alt+K"

#: appGUI/MainGUI.py:4476
msgid "Solder Paste Dispensing Tool"
msgstr "Solder Paste Dispensing Tool"

#: appGUI/MainGUI.py:4477
msgid "Alt+L"
msgstr "Alt+L"

#: appGUI/MainGUI.py:4477
msgid "Film PCB Tool"
msgstr "Film PCB Tool"

#: appGUI/MainGUI.py:4478
msgid "Alt+M"
msgstr "Alt+M"

#: appGUI/MainGUI.py:4479
msgid "Non-Copper Clearing Tool"
msgstr "Non-Copper Clearing Tool"

#: appGUI/MainGUI.py:4480
msgid "Alt+O"
msgstr "Alt+O"

#: appGUI/MainGUI.py:4481
msgid "Alt+P"
msgstr "Alt+P"

#: appGUI/MainGUI.py:4481
msgid "Paint Area Tool"
msgstr "Paint Area Tool"

#: appGUI/MainGUI.py:4482
msgid "Alt+Q"
msgstr "Alt+Q"

#: appGUI/MainGUI.py:4483
msgid "Rules Check Tool"
msgstr "Rules Check Tool"

#: appGUI/MainGUI.py:4484
msgid "View File Source"
msgstr "View File Source"

#: appGUI/MainGUI.py:4485
msgid "Alt+T"
msgstr "Alt+T"

#: appGUI/MainGUI.py:4485
msgid "Transformations Tool"
msgstr "Transformations Tool"

#: appGUI/MainGUI.py:4486
msgid "Alt+W"
msgstr "Alt+W"

#: appGUI/MainGUI.py:4487 appGUI/MainGUI.py:4704
msgid "Alt+X"
msgstr "Alt+X"

#: appGUI/MainGUI.py:4487
msgid "Cutout PCB Tool"
msgstr "Cutout PCB Tool"

#: appGUI/MainGUI.py:4488
msgid "Alt+Z"
msgstr "Alt+Z"

#: appGUI/MainGUI.py:4488 appTools/ToolPanelize.py:36
#: appTools/ToolPanelize.py:635
msgid "Panelize PCB"
msgstr "Panelize PCB"

#: appGUI/MainGUI.py:4491
msgid "Enable Non-selected Objects"
msgstr "Enable Non-selected Objects"

#: appGUI/MainGUI.py:4492
msgid "Disable Non-selected Objects"
msgstr "Disable Non-selected Objects"

#: appGUI/MainGUI.py:4493
msgid "Toggle Full Screen"
msgstr "Toggle Full Screen"

#: appGUI/MainGUI.py:4496
msgid "Ctrl+Alt+X"
msgstr "Ctrl+Alt+X"

#: appGUI/MainGUI.py:4496
msgid "Abort current task (gracefully)"
msgstr "Abort current task (gracefully)"

#: appGUI/MainGUI.py:4500
msgid "Ctrl+Shift+V"
msgstr "Ctrl+Shift+V"

#: appGUI/MainGUI.py:4500
msgid ""
"Paste Special. Will convert a Windows path style to the one required in Tcl "
"Shell"
msgstr ""
"Paste Special. Will convert a Windows path style to the one required in Tcl "
"Shell"

#: appGUI/MainGUI.py:4504
msgid "Open Online Manual"
msgstr "Open Online Manual"

#: appGUI/MainGUI.py:4505
msgid "Open Online Tutorials"
msgstr "Open Online Tutorials"

#: appGUI/MainGUI.py:4506
msgid "Refresh Plots"
msgstr "Refresh Plots"

#: appGUI/MainGUI.py:4507 appTools/ToolSolderPaste.py:71
msgid "Delete Object"
msgstr "Delete Object"

#: appGUI/MainGUI.py:4508
msgid "Alternate: Delete Tool"
msgstr "Alternate: Delete Tool"

#: appGUI/MainGUI.py:4509
msgid "(left to Key_1)Toggle Notebook Area (Left Side)"
msgstr "(left to Key_1)Toggle Notebook Area (Left Side)"

#: appGUI/MainGUI.py:4510
msgid "SPACE"
msgstr "SPACE"

#: appGUI/MainGUI.py:4510
msgid "En(Dis)able Obj Plot"
msgstr "En(Dis)able Obj Plot"

#: appGUI/MainGUI.py:4511 appGUI/MainGUI.py:4711 appGUI/MainGUI.py:4940
msgid "ESC"
msgstr "ESC"

#: appGUI/MainGUI.py:4511
msgid "Deselects all objects"
msgstr "Deselects all objects"

#: appGUI/MainGUI.py:4525
msgid "Editor Shortcut list"
msgstr "Editor Shortcut list"

#: appGUI/MainGUI.py:4680
msgid "GEOMETRY EDITOR"
msgstr "GEOMETRY EDITOR"

#: appGUI/MainGUI.py:4681
msgid "Draw an Arc"
msgstr "Draw an Arc"

#: appGUI/MainGUI.py:4683
msgid "Copy Geo Item"
msgstr "Copy Geo Item"

#: appGUI/MainGUI.py:4684
msgid "Within Add Arc will toogle the ARC direction: CW or CCW"
msgstr "Within Add Arc will toogle the ARC direction: CW or CCW"

#: appGUI/MainGUI.py:4685
msgid "Polygon Intersection Tool"
msgstr "Polygon Intersection Tool"

#: appGUI/MainGUI.py:4686
msgid "Geo Paint Tool"
msgstr "Geo Paint Tool"

#: appGUI/MainGUI.py:4687 appGUI/MainGUI.py:4797 appGUI/MainGUI.py:4930
msgid "Jump to Location (x, y)"
msgstr "Jump to Location (x, y)"

#: appGUI/MainGUI.py:4689
msgid "Move Geo Item"
msgstr "Move Geo Item"

#: appGUI/MainGUI.py:4690
msgid "Within Add Arc will cycle through the ARC modes"
msgstr "Within Add Arc will cycle through the ARC modes"

#: appGUI/MainGUI.py:4691
msgid "Draw a Polygon"
msgstr "Draw a Polygon"

#: appGUI/MainGUI.py:4692
msgid "Draw a Circle"
msgstr "Draw a Circle"

#: appGUI/MainGUI.py:4693
msgid "Draw a Path"
msgstr "Draw a Path"

#: appGUI/MainGUI.py:4694
msgid "Draw Rectangle"
msgstr "Draw Rectangle"

#: appGUI/MainGUI.py:4695
msgid "Polygon Subtraction Tool"
msgstr "Polygon Subtraction Tool"

#: appGUI/MainGUI.py:4696
msgid "Add Text Tool"
msgstr "Add Text Tool"

#: appGUI/MainGUI.py:4697
msgid "Polygon Union Tool"
msgstr "Polygon Union Tool"

#: appGUI/MainGUI.py:4698
msgid "Flip shape on X axis"
msgstr "Flip shape on X axis"

#: appGUI/MainGUI.py:4699
msgid "Flip shape on Y axis"
msgstr "Flip shape on Y axis"

#: appGUI/MainGUI.py:4701
msgid "Skew shape on X axis"
msgstr "Skew shape on X axis"

#: appGUI/MainGUI.py:4702
msgid "Skew shape on Y axis"
msgstr "Skew shape on Y axis"

#: appGUI/MainGUI.py:4703
msgid "Editor Transformation Tool"
msgstr "Editor Transformation Tool"

#: appGUI/MainGUI.py:4704
msgid "Offset shape on X axis"
msgstr "Offset shape on X axis"

#: appGUI/MainGUI.py:4705
msgid "Alt+Y"
msgstr "Alt+Y"

#: appGUI/MainGUI.py:4705
msgid "Offset shape on Y axis"
msgstr "Offset shape on Y axis"

#: appGUI/MainGUI.py:4707 appGUI/MainGUI.py:4807 appGUI/MainGUI.py:4943
msgid "Save Object and Exit Editor"
msgstr "Save Object and Exit Editor"

#: appGUI/MainGUI.py:4708
msgid "Polygon Cut Tool"
msgstr "Polygon Cut Tool"

#: appGUI/MainGUI.py:4709
msgid "Space"
msgstr "Space"

#: appGUI/MainGUI.py:4709
msgid "Rotate Geometry"
msgstr "Rotate Geometry"

#: appGUI/MainGUI.py:4710
msgid "ENTER"
msgstr "ENTER"

#: appGUI/MainGUI.py:4710
msgid "Finish drawing for certain tools"
msgstr "Finish drawing for certain tools"

#: appGUI/MainGUI.py:4711 appGUI/MainGUI.py:4806 appGUI/MainGUI.py:4940
msgid "Abort and return to Select"
msgstr "Abort and return to Select"

#: appGUI/MainGUI.py:4793
msgid "EXCELLON EDITOR"
msgstr "EXCELLON EDITOR"

#: appGUI/MainGUI.py:4795
msgid "Copy Drill(s)"
msgstr "Copy Drill(s)"

#: appGUI/MainGUI.py:4801
msgid "Add a new Tool"
msgstr "Add a new Tool"

#: appGUI/MainGUI.py:4804
msgid "Delete Drill(s)"
msgstr "Delete Drill(s)"

#: appGUI/MainGUI.py:4805
msgid "Alternate: Delete Tool(s)"
msgstr "Alternate: Delete Tool(s)"

#: appGUI/MainGUI.py:4806
msgid "Esc"
msgstr "Esc"

#: appGUI/MainGUI.py:4924
msgid "GERBER EDITOR"
msgstr "GERBER EDITOR"

#: appGUI/MainGUI.py:4934
msgid "Within Track & Region Tools will cycle in REVERSE the bend modes"
msgstr "Within Track & Region Tools will cycle in REVERSE the bend modes"

#: appGUI/MainGUI.py:4937
msgid "Within Track & Region Tools will cycle FORWARD the bend modes"
msgstr "Within Track & Region Tools will cycle FORWARD the bend modes"

#: appGUI/MainGUI.py:4939
msgid "Alternate: Delete Apertures"
msgstr "Alternate: Delete Apertures"

#: appGUI/MainGUI.py:4942
msgid "Eraser Tool"
msgstr "Eraser Tool"

#: appGUI/MainGUI.py:4944
#: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:221
msgid "Mark Area Tool"
msgstr "Mark Area Tool"

#: appGUI/MainGUI.py:4945
msgid "Poligonize Tool"
msgstr "Poligonize Tool"

#: appGUI/MainGUI.py:4946
msgid "Transformation Tool"
msgstr "Transformation Tool"

#: appGUI/ObjectUI.py:38
msgid "App Object"
msgstr "App Object"

#: appGUI/ObjectUI.py:78 appTools/ToolDrilling.py:2015
#: appTools/ToolIsolation.py:3080 appTools/ToolMilling.py:1620
msgid ""
"BASIC is suitable for a beginner. Many parameters\n"
"are hidden from the user in this mode.\n"
"ADVANCED mode will make available all parameters.\n"
"\n"
"To change the application LEVEL, go to:\n"
"Edit -> Preferences -> General and check:\n"
"'APP. LEVEL' radio button."
msgstr ""
"BASIC is suitable for a beginner. Many parameters\n"
"are hidden from the user in this mode.\n"
"ADVANCED mode will make available all parameters.\n"
"\n"
"To change the application LEVEL, go to:\n"
"Edit -> Preferences -> General and check:\n"
"'APP. LEVEL' radio button."

#: appGUI/ObjectUI.py:111 appGUI/ObjectUI.py:155
msgid "Geometrical transformations of the current object."
msgstr "Geometrical transformations of the current object."

#: appGUI/ObjectUI.py:120
msgid ""
"Factor by which to multiply\n"
"geometric features of this object.\n"
"Expressions are allowed. E.g: 1/25.4"
msgstr ""
"Factor by which to multiply\n"
"geometric features of this object.\n"
"Expressions are allowed. E.g: 1/25.4"

#: appGUI/ObjectUI.py:127
msgid "Perform scaling operation."
msgstr "Perform scaling operation."

#: appGUI/ObjectUI.py:138
msgid ""
"Amount by which to move the object\n"
"in the x and y axes in (x, y) format.\n"
"Expressions are allowed. E.g: (1/3.2, 0.5*3)"
msgstr ""
"Amount by which to move the object\n"
"in the x and y axes in (x, y) format.\n"
"Expressions are allowed. E.g: (1/3.2, 0.5*3)"

#: appGUI/ObjectUI.py:145
msgid "Perform the offset operation."
msgstr "Perform the offset operation."

#: appGUI/ObjectUI.py:188
msgid "Gerber Object"
msgstr "Gerber Object"

#: appGUI/ObjectUI.py:197 appGUI/ObjectUI.py:549 appGUI/ObjectUI.py:877
#: appGUI/ObjectUI.py:1878 appGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:30
#: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:33
#: appGUI/preferences/geometry/GeometryGenPrefGroupUI.py:33
#: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:31
msgid "Plot Options"
msgstr "Plot Options"

#: appGUI/ObjectUI.py:202 appGUI/ObjectUI.py:552
#: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:47
#: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:45
#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:132
#: appTools/ToolCopperThieving.py:1388
msgid "Solid"
msgstr "Solid"

#: appGUI/ObjectUI.py:204 appGUI/preferences/gerber/GerberGenPrefGroupUI.py:47
msgid "Solid color polygons."
msgstr "Solid color polygons."

#: appGUI/ObjectUI.py:209 appGUI/ObjectUI.py:558 appGUI/ObjectUI.py:883
msgid "Multi-Color"
msgstr "Multi-Color"

#: appGUI/ObjectUI.py:211 appGUI/ObjectUI.py:560 appGUI/ObjectUI.py:885
#: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:56
#: appGUI/preferences/geometry/GeometryGenPrefGroupUI.py:49
#: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:54
msgid "Draw polygons in different colors."
msgstr "Draw polygons in different colors."

#: appGUI/ObjectUI.py:226 appGUI/ObjectUI.py:634
#: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:40
#: appGUI/preferences/geometry/GeometryGenPrefGroupUI.py:40
#: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:38
msgid "Plot"
msgstr "Plot"

#: appGUI/ObjectUI.py:227 appGUI/ObjectUI.py:636 appGUI/ObjectUI.py:988
#: appGUI/ObjectUI.py:2023 appGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:41
#: appGUI/preferences/geometry/GeometryGenPrefGroupUI.py:42
#: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:40
msgid "Plot (show) this object."
msgstr "Plot (show) this object."

#: appGUI/ObjectUI.py:244
msgid "Edit an Gerber object."
msgstr "Edit an Gerber object."

#: appGUI/ObjectUI.py:255 appGUI/ObjectUI.py:594 appGUI/ObjectUI.py:916
#: appGUI/ObjectUI.py:1924
msgid "PROPERTIES"
msgstr "PROPERTIES"

#: appGUI/ObjectUI.py:257 appGUI/ObjectUI.py:596 appGUI/ObjectUI.py:918
#: appGUI/ObjectUI.py:1926
msgid "Show the Properties."
msgstr "Show the Properties."

#: appGUI/ObjectUI.py:291 appGUI/ObjectUI.py:629
#: appGUI/preferences/excellon/ExcellonAdvOptPrefGroupUI.py:50
#: appGUI/preferences/gerber/GerberAdvOptPrefGroupUI.py:54
msgid "Toggle the display of the Tools Table."
msgstr "Toggle the display of the Tools Table."

#: appGUI/ObjectUI.py:300
msgid "Mark All"
msgstr "Mark All"

#: appGUI/ObjectUI.py:302
msgid ""
"When checked it will display all the apertures.\n"
"When unchecked, it will delete all mark shapes\n"
"that are drawn on canvas."
msgstr ""
"When checked it will display all the apertures.\n"
"When unchecked, it will delete all mark shapes\n"
"that are drawn on canvas."

#: appGUI/ObjectUI.py:332 appTools/ToolPunchGerber.py:1101
msgid "Mark the aperture instances on canvas."
msgstr "Mark the aperture instances on canvas."

#: appGUI/ObjectUI.py:339 appTools/ToolIsolation.py:3570
msgid "Buffer Solid Geometry"
msgstr "Buffer Solid Geometry"

#: appGUI/ObjectUI.py:341 appTools/ToolIsolation.py:3572
msgid ""
"This button is shown only when the Gerber file\n"
"is loaded without buffering.\n"
"Clicking this will create the buffered geometry\n"
"required for isolation."
msgstr ""
"This button is shown only when the Gerber file\n"
"is loaded without buffering.\n"
"Clicking this will create the buffered geometry\n"
"required for isolation."

#: appGUI/ObjectUI.py:357
msgid "Isolation Routing"
msgstr "Isolation Routing"

#: appGUI/ObjectUI.py:360 appGUI/preferences/tools/ToolsISOPrefGroupUI.py:32
#: appTools/ToolIsolation.py:3070
msgid ""
"Create a Geometry object with\n"
"toolpaths to cut around polygons."
msgstr ""
"Create a Geometry object with\n"
"toolpaths to cut around polygons."

#: appGUI/ObjectUI.py:375 appGUI/ObjectUI.py:1827 appTools/ToolNCC.py:4483
msgid ""
"Create the Geometry Object\n"
"for non-copper routing."
msgstr ""
"Create the Geometry Object\n"
"for non-copper routing."

#: appGUI/ObjectUI.py:390
msgid ""
"Generate the geometry for\n"
"the board cutout."
msgstr ""
"Generate the geometry for\n"
"the board cutout."

#: appGUI/ObjectUI.py:407 appGUI/ObjectUI.py:756
msgid "UTILTIES"
msgstr "UTILTIES"

#: appGUI/ObjectUI.py:409 appGUI/ObjectUI.py:758
msgid "Show the Utilties."
msgstr "Show the Utilties."

#: appGUI/ObjectUI.py:433 appGUI/preferences/gerber/GerberOptPrefGroupUI.py:32
msgid "Non-copper regions"
msgstr "Non-copper regions"

#: appGUI/ObjectUI.py:435 appGUI/preferences/gerber/GerberOptPrefGroupUI.py:34
msgid ""
"Create polygons covering the\n"
"areas without copper on the PCB.\n"
"Equivalent to the inverse of this\n"
"object. Can be used to remove all\n"
"copper from a specified region."
msgstr ""
"Create polygons covering the\n"
"areas without copper on the PCB.\n"
"Equivalent to the inverse of this\n"
"object. Can be used to remove all\n"
"copper from a specified region."

#: appGUI/ObjectUI.py:445 appGUI/ObjectUI.py:486
#: appGUI/preferences/gerber/GerberOptPrefGroupUI.py:46
#: appGUI/preferences/gerber/GerberOptPrefGroupUI.py:79
msgid "Boundary Margin"
msgstr "Boundary Margin"

#: appGUI/ObjectUI.py:447 appGUI/preferences/gerber/GerberOptPrefGroupUI.py:48
msgid ""
"Specify the edge of the PCB\n"
"by drawing a box around all\n"
"objects with this minimum\n"
"distance."
msgstr ""
"Specify the edge of the PCB\n"
"by drawing a box around all\n"
"objects with this minimum\n"
"distance."

#: appGUI/ObjectUI.py:464 appGUI/preferences/gerber/GerberOptPrefGroupUI.py:63
msgid "Resulting geometry will have rounded corners."
msgstr "Resulting geometry will have rounded corners."

#: appGUI/ObjectUI.py:467 appGUI/ObjectUI.py:507 appTools/ToolCutOut.py:2304
#: appTools/ToolCutOut.py:2319 appTools/ToolIsolation.py:3549
#: appTools/ToolNCC.py:4480 appTools/ToolPaint.py:3167
msgid "Generate Geometry"
msgstr "Generate Geometry"

#: appGUI/ObjectUI.py:478 appGUI/preferences/gerber/GerberOptPrefGroupUI.py:73
#: appGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:137
#: appTools/ToolPanelize.py:699 appTools/ToolQRCode.py:789
msgid "Bounding Box"
msgstr "Bounding Box"

#: appGUI/ObjectUI.py:480
msgid ""
"Create a geometry surrounding the Gerber object.\n"
"Square shape."
msgstr ""
"Create a geometry surrounding the Gerber object.\n"
"Square shape."

#: appGUI/ObjectUI.py:488 appGUI/preferences/gerber/GerberOptPrefGroupUI.py:81
msgid ""
"Distance of the edges of the box\n"
"to the nearest polygon."
msgstr ""
"Distance of the edges of the box\n"
"to the nearest polygon."

#: appGUI/ObjectUI.py:501 appGUI/preferences/gerber/GerberOptPrefGroupUI.py:94
msgid ""
"If the bounding box is \n"
"to have rounded corners\n"
"their radius is equal to\n"
"the margin."
msgstr ""
"If the bounding box is \n"
"to have rounded corners\n"
"their radius is equal to\n"
"the margin."

#: appGUI/ObjectUI.py:510
msgid "Generate the Geometry object."
msgstr "Generate the Geometry object."

#: appGUI/ObjectUI.py:537
msgid "Excellon Object"
msgstr "Excellon Object"

#: appGUI/ObjectUI.py:554
msgid "Solid circles."
msgstr "Solid circles."

#: appGUI/ObjectUI.py:583
msgid "Edit an Excellon object."
msgstr "Edit an Excellon object."

#: appGUI/ObjectUI.py:671 appTools/ToolDrilling.py:2067
#: appTools/ToolMilling.py:1672
msgid ""
"This is the Tool Number.\n"
"When ToolChange is checked, on toolchange event this value\n"
"will be showed as a T1, T2 ... Tn in the Machine Code.\n"
"\n"
"Here the tools are selected for G-code generation."
msgstr ""
"This is the Tool Number.\n"
"When ToolChange is checked, on toolchange event this value\n"
"will be showed as a T1, T2 ... Tn in the Machine Code.\n"
"\n"
"Here the tools are selected for G-code generation."

#: appGUI/ObjectUI.py:676 appGUI/ObjectUI.py:1012 appTools/ToolDrilling.py:2072
#: appTools/ToolMilling.py:1677 appTools/ToolPaint.py:2845
msgid ""
"Tool Diameter. It's value (in current FlatCAM units) \n"
"is the cut width into the material."
msgstr ""
"Tool Diameter. It's value (in current FlatCAM units) \n"
"is the cut width into the material."

#: appGUI/ObjectUI.py:679 appTools/ToolDrilling.py:2075
#: appTools/ToolMilling.py:1680
msgid ""
"The number of Drill holes. Holes that are drilled with\n"
"a drill bit."
msgstr ""
"The number of Drill holes. Holes that are drilled with\n"
"a drill bit."

#: appGUI/ObjectUI.py:682 appTools/ToolDrilling.py:2078
#: appTools/ToolMilling.py:1683
msgid ""
"The number of Slot holes. Holes that are created by\n"
"milling them with an endmill bit."
msgstr ""
"The number of Slot holes. Holes that are created by\n"
"milling them with an endmill bit."

#: appGUI/ObjectUI.py:685
msgid "Show the color of the drill holes when using multi-color."
msgstr "Show the color of the drill holes when using multi-color."

#: appGUI/ObjectUI.py:687
msgid ""
"Toggle display of the drills for the current tool.\n"
"This does not select the tools for G-code generation."
msgstr ""
"Toggle display of the drills for the current tool.\n"
"This does not select the tools for G-code generation."

#: appGUI/ObjectUI.py:696
#: appGUI/preferences/excellon/ExcellonAdvOptPrefGroupUI.py:55
msgid "Auto load from DB"
msgstr "Auto load from DB"

#: appGUI/ObjectUI.py:698
#: appGUI/preferences/excellon/ExcellonAdvOptPrefGroupUI.py:57
msgid ""
"Automatic replacement of the tools from related application tools\n"
"with tools from DB that have a close diameter value."
msgstr ""
"Automatic replacement of the tools from related application tools\n"
"with tools from DB that have a close diameter value."

#: appGUI/ObjectUI.py:724
msgid "Generate GCode out of drill holes in an Excellon object."
msgstr "Generate GCode out of drill holes in an Excellon object."

#: appGUI/ObjectUI.py:735 appGUI/ObjectUI.py:1792
msgid "Milling Tool"
msgstr "Milling Tool"

#: appGUI/ObjectUI.py:738
msgid "Generate a Geometry for milling drills or slots in an Excellon object."
msgstr "Generate a Geometry for milling drills or slots in an Excellon object."

#: appGUI/ObjectUI.py:782
msgid "Milling Geometry"
msgstr "Milling Geometry"

#: appGUI/ObjectUI.py:784
msgid ""
"Create Geometry for milling holes.\n"
"Select from the Tools Table above the hole dias to be\n"
"milled. Use the # column to make the selection."
msgstr ""
"Create Geometry for milling holes.\n"
"Select from the Tools Table above the hole dias to be\n"
"milled. Use the # column to make the selection."

#: appGUI/ObjectUI.py:790
#: appGUI/preferences/excellon/ExcellonOptPrefGroupUI.py:80
#: appTools/ToolMilling.py:1779
msgid "Milling Diameter"
msgstr "Milling Diameter"

#: appGUI/ObjectUI.py:792
#: appGUI/preferences/excellon/ExcellonOptPrefGroupUI.py:101
msgid "Diameter of the cutting tool."
msgstr "Diameter of the cutting tool."

#: appGUI/ObjectUI.py:802
msgid "Mill Drills"
msgstr "Mill Drills"

#: appGUI/ObjectUI.py:804
msgid ""
"Create the Geometry Object\n"
"for milling drills."
msgstr ""
"Create the Geometry Object\n"
"for milling drills."

#: appGUI/ObjectUI.py:822
msgid "Mill Slots"
msgstr "Mill Slots"

#: appGUI/ObjectUI.py:824
msgid ""
"Create the Geometry Object\n"
"for milling slots."
msgstr ""
"Create the Geometry Object\n"
"for milling slots."

#: appGUI/ObjectUI.py:866
msgid "Geometry Object"
msgstr "Geometry Object"

#: appGUI/ObjectUI.py:905
msgid "Edit an Geometry object."
msgstr "Edit an Geometry object."

#: appGUI/ObjectUI.py:969
msgid ""
"Tools in this Geometry object used for cutting.\n"
"The 'Offset' entry will set an offset for the cut.\n"
"'Offset' can be inside, outside, on path (none) and custom.\n"
"'Type' entry is only informative and it allow to know the \n"
"intent of using the current tool. \n"
"It can be Rough(ing), Finish(ing) or Iso(lation).\n"
"The 'Tool type'(TT) can be circular with 1 to 4 teeths(C1..C4),\n"
"ball(B), or V-Shaped(V). \n"
"When V-shaped is selected the 'Type' entry is automatically \n"
"set to Isolation, the CutZ parameter in the UI form is\n"
"grayed out and Cut Z is automatically calculated from the newly \n"
"showed UI form entries named V-Tip Dia and V-Tip Angle."
msgstr ""
"Tools in this Geometry object used for cutting.\n"
"The 'Offset' entry will set an offset for the cut.\n"
"'Offset' can be inside, outside, on path (none) and custom.\n"
"'Type' entry is only informative and it allow to know the \n"
"intent of using the current tool. \n"
"It can be Rough(ing), Finish(ing) or Iso(lation).\n"
"The 'Tool type'(TT) can be circular with 1 to 4 teeths(C1..C4),\n"
"ball(B), or V-Shaped(V). \n"
"When V-shaped is selected the 'Type' entry is automatically \n"
"set to Isolation, the CutZ parameter in the UI form is\n"
"grayed out and Cut Z is automatically calculated from the newly \n"
"showed UI form entries named V-Tip Dia and V-Tip Angle."

#: appGUI/ObjectUI.py:986 appGUI/ObjectUI.py:2021
#: appGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:40
msgid "Plot Object"
msgstr "Plot Object"

#: appGUI/ObjectUI.py:1006
msgid ""
"This is the Tool Number.\n"
"When ToolChange is checked, on toolchange event this value\n"
"will be showed as a T1, T2 ... Tn"
msgstr ""
"This is the Tool Number.\n"
"When ToolChange is checked, on toolchange event this value\n"
"will be showed as a T1, T2 ... Tn"

#: appGUI/ObjectUI.py:1017
msgid ""
"The value for the Offset can be:\n"
"- Path -> There is no offset, the tool cut will be done through the geometry "
"line.\n"
"- In(side) -> The tool cut will follow the geometry inside. It will create a "
"'pocket'.\n"
"- Out(side) -> The tool cut will follow the geometry line on the outside."
msgstr ""
"The value for the Offset can be:\n"
"- Path -> There is no offset, the tool cut will be done through the geometry "
"line.\n"
"- In(side) -> The tool cut will follow the geometry inside. It will create a "
"'pocket'.\n"
"- Out(side) -> The tool cut will follow the geometry line on the outside."

#: appGUI/ObjectUI.py:1024
msgid ""
"The (Operation) Type has only informative value. Usually the UI form "
"values \n"
"are choose based on the operation type and this will serve as a reminder.\n"
"Can be 'Roughing', 'Finishing' or 'Isolation'.\n"
"For Roughing we may choose a lower Feedrate and multiDepth cut.\n"
"For Finishing we may choose a higher Feedrate, without multiDepth.\n"
"For Isolation we need a lower Feedrate as it use a milling bit with a fine "
"tip."
msgstr ""
"The (Operation) Type has only informative value. Usually the UI form "
"values \n"
"are choose based on the operation type and this will serve as a reminder.\n"
"Can be 'Roughing', 'Finishing' or 'Isolation'.\n"
"For Roughing we may choose a lower Feedrate and multiDepth cut.\n"
"For Finishing we may choose a higher Feedrate, without multiDepth.\n"
"For Isolation we need a lower Feedrate as it use a milling bit with a fine "
"tip."

#: appGUI/ObjectUI.py:1033
msgid ""
"The Tool Type (TT) can be:\n"
"- Circular with 1 ... 4 teeth -> it is informative only. Being circular the "
"cut width in material\n"
"is exactly the tool diameter.\n"
"- Ball -> informative only and make reference to the Ball type endmill.\n"
"- V-Shape -> it will disable Z-Cut parameter in the UI form and enable two "
"additional UI form\n"
"fields: V-Tip Dia and V-Tip Angle. Adjusting those two values will adjust "
"the Z-Cut parameter such\n"
"as the cut width into material will be equal with the value in the Tool "
"Diameter column of this table.\n"
"Choosing the V-Shape Tool Type automatically will select the Operation Type "
"as Isolation."
msgstr ""
"The Tool Type (TT) can be:\n"
"- Circular with 1 ... 4 teeth -> it is informative only. Being circular the "
"cut width in material\n"
"is exactly the tool diameter.\n"
"- Ball -> informative only and make reference to the Ball type endmill.\n"
"- V-Shape -> it will disable Z-Cut parameter in the UI form and enable two "
"additional UI form\n"
"fields: V-Tip Dia and V-Tip Angle. Adjusting those two values will adjust "
"the Z-Cut parameter such\n"
"as the cut width into material will be equal with the value in the Tool "
"Diameter column of this table.\n"
"Choosing the V-Shape Tool Type automatically will select the Operation Type "
"as Isolation."

#: appGUI/ObjectUI.py:1045
msgid ""
"Plot column. It is visible only for MultiGeo geometries, meaning geometries "
"that holds the geometry\n"
"data into the tools. For those geometries, deleting the tool will delete the "
"geometry data also,\n"
"so be WARNED. From the checkboxes on each row it can be enabled/disabled the "
"plot on canvas\n"
"for the corresponding tool."
msgstr ""
"Plot column. It is visible only for MultiGeo geometries, meaning geometries "
"that holds the geometry\n"
"data into the tools. For those geometries, deleting the tool will delete the "
"geometry data also,\n"
"so be WARNED. From the checkboxes on each row it can be enabled/disabled the "
"plot on canvas\n"
"for the corresponding tool."

#: appGUI/ObjectUI.py:1060
msgid ""
"The value to offset the cut when \n"
"the Offset type selected is 'Offset'.\n"
"The value can be positive for 'outside'\n"
"cut and negative for 'inside' cut."
msgstr ""
"The value to offset the cut when \n"
"the Offset type selected is 'Offset'.\n"
"The value can be positive for 'outside'\n"
"cut and negative for 'inside' cut."

#: appGUI/ObjectUI.py:1079 appTools/ToolIsolation.py:3192
#: appTools/ToolNCC.py:66 appTools/ToolNCC.py:4075 appTools/ToolPaint.py:140
#: appTools/ToolPaint.py:2896
msgid "Add from DB"
msgstr "Add from DB"

#: appGUI/ObjectUI.py:1096 appTools/ToolCutOut.py:2088
#: appTools/ToolIsolation.py:61 appTools/ToolIsolation.py:3227
#: appTools/ToolNCC.py:4109 appTools/ToolPaint.py:2916
msgid "Search and Add"
msgstr "Search and Add"

#: appGUI/ObjectUI.py:1099
msgid ""
"Add a new tool to the Tool Table\n"
"with the diameter specified above."
msgstr ""
"Add a new tool to the Tool Table\n"
"with the diameter specified above."

#: appGUI/ObjectUI.py:1103 appObjects/FlatCAMGeometry.py:572
#: appTools/ToolCutOut.py:2100 appTools/ToolIsolation.py:66
#: appTools/ToolIsolation.py:3238 appTools/ToolNCC.py:4120
#: appTools/ToolPaint.py:2927
msgid "Pick from DB"
msgstr "Pick from DB"

#: appGUI/ObjectUI.py:1106 appTools/ToolCutOut.py:2103
#: appTools/ToolIsolation.py:3241 appTools/ToolNCC.py:4123
#: appTools/ToolPaint.py:2930
msgid ""
"Add a new tool to the Tool Table\n"
"from the Tools Database.\n"
"Tools database administration in in:\n"
"Menu: Options -> Tools Database"
msgstr ""
"Add a new tool to the Tool Table\n"
"from the Tools Database.\n"
"Tools database administration in in:\n"
"Menu: Options -> Tools Database"

#: appGUI/ObjectUI.py:1128
msgid ""
"Delete a selection of tools in the Tool Table\n"
"by first selecting a row in the Tool Table."
msgstr ""
"Delete a selection of tools in the Tool Table\n"
"by first selecting a row in the Tool Table."

#: appGUI/ObjectUI.py:1161 appObjects/FlatCAMGeometry.py:404
#: appObjects/FlatCAMGeometry.py:898 appObjects/FlatCAMGeometry.py:903
#: appObjects/FlatCAMGeometry.py:937 appObjects/FlatCAMGeometry.py:962
#: appObjects/FlatCAMGeometry.py:966 appTools/ToolDrilling.py:705
#: appTools/ToolDrilling.py:711 appTools/ToolDrilling.py:754
#: appTools/ToolDrilling.py:983 appTools/ToolDrilling.py:990
#: appTools/ToolDrilling.py:1021 appTools/ToolDrilling.py:1033
#: appTools/ToolDrilling.py:1037 appTools/ToolDrilling.py:2116
#: appTools/ToolIsolation.py:532 appTools/ToolIsolation.py:640
#: appTools/ToolIsolation.py:645 appTools/ToolIsolation.py:675
#: appTools/ToolIsolation.py:698 appTools/ToolIsolation.py:711
#: appTools/ToolIsolation.py:3271 appTools/ToolMilling.py:628
#: appTools/ToolMilling.py:744 appTools/ToolMilling.py:749
#: appTools/ToolMilling.py:779 appTools/ToolMilling.py:790
#: appTools/ToolMilling.py:794 appTools/ToolMilling.py:1711
#: appTools/ToolNCC.py:271 appTools/ToolNCC.py:276 appTools/ToolNCC.py:306
#: appTools/ToolNCC.py:329 appTools/ToolNCC.py:342 appTools/ToolNCC.py:729
#: appTools/ToolNCC.py:4153 appTools/ToolPaint.py:245 appTools/ToolPaint.py:250
#: appTools/ToolPaint.py:280 appTools/ToolPaint.py:302
#: appTools/ToolPaint.py:314 appTools/ToolPaint.py:664
#: appTools/ToolPaint.py:2958
msgid "Parameters for"
msgstr "Parameters for"

#: appGUI/ObjectUI.py:1164 appTools/ToolDrilling.py:2119
#: appTools/ToolIsolation.py:3274 appTools/ToolMilling.py:1714
#: appTools/ToolNCC.py:4156 appTools/ToolPaint.py:2961
msgid ""
"The data used for creating GCode.\n"
"Each tool store it's own set of such data."
msgstr ""
"The data used for creating GCode.\n"
"Each tool store it's own set of such data."

#: appGUI/ObjectUI.py:1171 appGUI/preferences/tools/ToolsISOPrefGroupUI.py:89
#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:72
#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:76
#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:83
msgid "V-Tip Dia"
msgstr "V-Tip Dia"

#: appGUI/ObjectUI.py:1174 appGUI/preferences/tools/ToolsISOPrefGroupUI.py:91
#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:74
#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:78
msgid "The tip diameter for V-Shape Tool"
msgstr "The tip diameter for V-Shape Tool"

#: appGUI/ObjectUI.py:1186 appGUI/preferences/tools/ToolsISOPrefGroupUI.py:101
#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:84
#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:89
#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:97
msgid "V-Tip Angle"
msgstr "V-Tip Angle"

#: appGUI/ObjectUI.py:1189 appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:86
#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:91
msgid ""
"The tip angle for V-Shape Tool.\n"
"In degree."
msgstr ""
"The tip angle for V-Shape Tool.\n"
"In degree."

#: appGUI/ObjectUI.py:1205
#: appGUI/preferences/geometry/GeometryOptPrefGroupUI.py:51
#: appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:61
#: appObjects/FlatCAMGeometry.py:1530 appTools/ToolCutOut.py:2124
msgid ""
"Cutting depth (negative)\n"
"below the copper surface."
msgstr ""
"Cutting depth (negative)\n"
"below the copper surface."

#: appGUI/ObjectUI.py:1223
#: appGUI/preferences/geometry/GeometryOptPrefGroupUI.py:69
#: appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:79
#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:77
#: appTools/ToolCutOut.py:2142 appTools/ToolDrilling.py:2164
#: appTools/ToolMilling.py:1814
msgid "Multi-Depth"
msgstr "Multi-Depth"

#: appGUI/ObjectUI.py:1251 appGUI/ObjectUI.py:1654
#: appGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:282
#: appGUI/preferences/geometry/GeometryOptPrefGroupUI.py:104
msgid ""
"Height of the tool when\n"
"moving without cutting."
msgstr ""
"Height of the tool when\n"
"moving without cutting."

#: appGUI/ObjectUI.py:1270
#: appGUI/preferences/geometry/GeometryOptPrefGroupUI.py:188
#: appTools/ToolMilling.py:1862
msgid ""
"Cutting speed in the XY\n"
"plane in units per minute"
msgstr ""
"Cutting speed in the XY\n"
"plane in units per minute"

#: appGUI/ObjectUI.py:1284
#: appGUI/preferences/geometry/GeometryOptPrefGroupUI.py:203
msgid ""
"Cutting speed in the XY\n"
"plane in units per minute.\n"
"It is called also Plunge."
msgstr ""
"Cutting speed in the XY\n"
"plane in units per minute.\n"
"It is called also Plunge."

#: appGUI/ObjectUI.py:1299
#: appGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:69
msgid ""
"Cutting speed in the XY plane\n"
"(in units per minute).\n"
"This is for the rapid move G00.\n"
"It is useful only for Marlin,\n"
"ignore for any other cases."
msgstr ""
"Cutting speed in the XY plane\n"
"(in units per minute).\n"
"This is for the rapid move G00.\n"
"It is useful only for Marlin,\n"
"ignore for any other cases."

#: appGUI/ObjectUI.py:1317
#: appGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:85
#: appTools/ToolMilling.py:1914
msgid "Re-cut"
msgstr "Re-cut"

#: appGUI/ObjectUI.py:1319 appGUI/ObjectUI.py:1331
#: appGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:87
#: appGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:99
#: appTools/ToolMilling.py:1916 appTools/ToolMilling.py:1929
msgid ""
"In order to remove possible\n"
"copper leftovers where first cut\n"
"meet with last cut, we generate an\n"
"extended cut over the first cut section."
msgstr ""
"In order to remove possible\n"
"copper leftovers where first cut\n"
"meet with last cut, we generate an\n"
"extended cut over the first cut section."

#: appGUI/ObjectUI.py:1343
#: appGUI/preferences/geometry/GeometryOptPrefGroupUI.py:220
msgid ""
"Speed of the spindle in RPM (optional).\n"
"If LASER preprocessor is used,\n"
"this value is the power of laser."
msgstr ""
"Speed of the spindle in RPM (optional).\n"
"If LASER preprocessor is used,\n"
"this value is the power of laser."

#: appGUI/ObjectUI.py:1359
#: appGUI/preferences/geometry/GeometryOptPrefGroupUI.py:235
#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:202
#: appTools/ToolDrilling.py:2266 appTools/ToolMilling.py:1959
msgid ""
"Pause to allow the spindle to reach its\n"
"speed before cutting."
msgstr ""
"Pause to allow the spindle to reach its\n"
"speed before cutting."

#: appGUI/ObjectUI.py:1369
#: appGUI/preferences/geometry/GeometryOptPrefGroupUI.py:240
#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:210
#: appTools/ToolDrilling.py:2278 appTools/ToolMilling.py:1970
msgid "Number of time units for spindle to dwell."
msgstr "Number of time units for spindle to dwell."

#: appGUI/ObjectUI.py:1377 appGUI/ObjectUI.py:2165
#: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:131
#: appGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:108
#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:334
#: appTools/ToolDrilling.py:2461 appTools/ToolMilling.py:2129
msgid "Probe Z depth"
msgstr "Probe Z depth"

#: appGUI/ObjectUI.py:1379 appGUI/ObjectUI.py:2167
#: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:133
#: appGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:110
#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:336
#: appTools/ToolDrilling.py:2463 appTools/ToolMilling.py:2131
msgid ""
"The maximum depth that the probe is allowed\n"
"to probe. Negative value, in current units."
msgstr ""
"The maximum depth that the probe is allowed\n"
"to probe. Negative value, in current units."

#: appGUI/ObjectUI.py:1394
#: appGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:123
#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:347
#: appTools/ToolDrilling.py:2480 appTools/ToolMilling.py:2148
msgid "Feedrate Probe"
msgstr "Feedrate Probe"

#: appGUI/ObjectUI.py:1396 appGUI/ObjectUI.py:2180
#: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:146
#: appGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:125
#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:349
#: appTools/ToolDrilling.py:2482 appTools/ToolMilling.py:2150
msgid "The feedrate used while the probe is probing."
msgstr "The feedrate used while the probe is probing."

#: appGUI/ObjectUI.py:1423 appTools/ToolDrilling.py:2364
#: appTools/ToolIsolation.py:3370 appTools/ToolMilling.py:2042
#: appTools/ToolNCC.py:4314 appTools/ToolPaint.py:3056
msgid "Apply parameters to all tools"
msgstr "Apply parameters to all tools"

#: appGUI/ObjectUI.py:1426 appTools/ToolDrilling.py:2367
#: appTools/ToolIsolation.py:3373 appTools/ToolMilling.py:2045
#: appTools/ToolNCC.py:4317 appTools/ToolPaint.py:3059
msgid ""
"The parameters in the current form will be applied\n"
"on all the tools from the Tool Table."
msgstr ""
"The parameters in the current form will be applied\n"
"on all the tools from the Tool Table."

#: appGUI/ObjectUI.py:1437 appTools/ToolDrilling.py:2378
#: appTools/ToolIsolation.py:3384 appTools/ToolMilling.py:2056
#: appTools/ToolNCC.py:4328 appTools/ToolPaint.py:3070
msgid "Common Parameters"
msgstr "Common Parameters"

#: appGUI/ObjectUI.py:1439 appTools/ToolDrilling.py:2380
#: appTools/ToolIsolation.py:3386 appTools/ToolMilling.py:2058
#: appTools/ToolNCC.py:4330 appTools/ToolPaint.py:3072
msgid "Parameters that are common for all tools."
msgstr "Parameters that are common for all tools."

#: appGUI/ObjectUI.py:1444 appTools/ToolDrilling.py:2394
#: appTools/ToolMilling.py:2063
msgid "Tool change Z"
msgstr "Tool change Z"

#: appGUI/ObjectUI.py:1447
#: appGUI/preferences/geometry/GeometryOptPrefGroupUI.py:125
msgid ""
"Include tool-change sequence\n"
"in the Machine Code (Pause for tool change)."
msgstr ""
"Include tool-change sequence\n"
"in the Machine Code (Pause for tool change)."

#: appGUI/ObjectUI.py:1455
#: appGUI/preferences/geometry/GeometryOptPrefGroupUI.py:135
#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:126
#: appTools/ToolDrilling.py:2396 appTools/ToolMilling.py:2072
msgid ""
"Z-axis position (height) for\n"
"tool change."
msgstr ""
"Z-axis position (height) for\n"
"tool change."

#: appGUI/ObjectUI.py:1483
#: appGUI/preferences/geometry/GeometryOptPrefGroupUI.py:154
#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:142
#: appTools/ToolDrilling.py:2427 appTools/ToolMilling.py:2098
msgid "End move Z"
msgstr "End move Z"

#: appGUI/ObjectUI.py:1485
#: appGUI/preferences/geometry/GeometryOptPrefGroupUI.py:156
#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:144
#: appTools/ToolDrilling.py:2429 appTools/ToolMilling.py:2100
msgid ""
"Height of the tool after\n"
"the last move at the end of the job."
msgstr ""
"Height of the tool after\n"
"the last move at the end of the job."

#: appGUI/ObjectUI.py:1502
#: appGUI/preferences/geometry/GeometryOptPrefGroupUI.py:174
#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:159
#: appTools/ToolDrilling.py:2447 appTools/ToolMilling.py:2117
msgid "End move X,Y"
msgstr "End move X,Y"

#: appGUI/ObjectUI.py:1504
#: appGUI/preferences/geometry/GeometryOptPrefGroupUI.py:176
#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:161
#: appTools/ToolDrilling.py:2449 appTools/ToolMilling.py:2119
msgid ""
"End move X,Y position. In format (x,y).\n"
"If no value is entered then there is no move\n"
"on X,Y plane at the end of the job."
msgstr ""
"End move X,Y position. In format (x,y).\n"
"If no value is entered then there is no move\n"
"on X,Y plane at the end of the job."

#: appGUI/ObjectUI.py:1509 appTools/ToolDrilling.py:2454
#: appTools/ToolMilling.py:2124
msgid "X,Y coordinates"
msgstr "X,Y coordinates"

#: appGUI/ObjectUI.py:1515
#: appGUI/preferences/geometry/GeometryOptPrefGroupUI.py:255
#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:221
#: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:237
#: appTools/ToolDrilling.py:2498 appTools/ToolSolderPaste.py:1408
msgid "Preprocessor"
msgstr "Preprocessor"

#: appGUI/ObjectUI.py:1517
#: appGUI/preferences/geometry/GeometryOptPrefGroupUI.py:257
msgid ""
"The Preprocessor file that dictates\n"
"the Machine Code (like GCode, RML, HPGL) output."
msgstr ""
"The Preprocessor file that dictates\n"
"the Machine Code (like GCode, RML, HPGL) output."

#: appGUI/ObjectUI.py:1533 appTools/ToolDrilling.py:2515
#: appTools/ToolMilling.py:2194
msgid "Add exclusion areas"
msgstr "Add exclusion areas"

#: appGUI/ObjectUI.py:1536
#: appGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:210
#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:411
#: appTools/ToolDrilling.py:2518 appTools/ToolMilling.py:2197
msgid ""
"Include exclusion areas.\n"
"In those areas the travel of the tools\n"
"is forbidden."
msgstr ""
"Include exclusion areas.\n"
"In those areas the travel of the tools\n"
"is forbidden."

#: appGUI/ObjectUI.py:1557 appGUI/ObjectUI.py:1576
#: appGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:230
#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:431
#: appTools/ToolDrilling.py:2540 appTools/ToolDrilling.py:2559
#: appTools/ToolMilling.py:2218 appTools/ToolMilling.py:2237
msgid "Strategy"
msgstr "Strategy"

#: appGUI/ObjectUI.py:1557 appGUI/ObjectUI.py:1588
#: appGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:242
#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:443
#: appTools/ToolDrilling.py:2540 appTools/ToolDrilling.py:2572
#: appTools/ToolMilling.py:2218 appTools/ToolMilling.py:2249
msgid "Over Z"
msgstr "Over Z"

#: appGUI/ObjectUI.py:1559 appTools/ToolDrilling.py:2542
#: appTools/ToolMilling.py:2220
msgid "This is the Area ID."
msgstr "This is the Area ID."

#: appGUI/ObjectUI.py:1561 appTools/ToolDrilling.py:2544
#: appTools/ToolMilling.py:2222
msgid "Type of the object where the exclusion area was added."
msgstr "Type of the object where the exclusion area was added."

#: appGUI/ObjectUI.py:1563 appTools/ToolDrilling.py:2546
#: appTools/ToolMilling.py:2224
msgid ""
"The strategy used for exclusion area. Go around the exclusion areas or over "
"it."
msgstr ""
"The strategy used for exclusion area. Go around the exclusion areas or over "
"it."

#: appGUI/ObjectUI.py:1565 appTools/ToolDrilling.py:2548
#: appTools/ToolMilling.py:2226
msgid ""
"If the strategy is to go over the area then this is the height at which the "
"tool will go to avoid the exclusion area."
msgstr ""
"If the strategy is to go over the area then this is the height at which the "
"tool will go to avoid the exclusion area."

#: appGUI/ObjectUI.py:1577
#: appGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:231
#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:432
#: appTools/ToolDrilling.py:2560 appTools/ToolMilling.py:2238
msgid ""
"The strategy followed when encountering an exclusion area.\n"
"Can be:\n"
"- Over -> when encountering the area, the tool will go to a set height\n"
"- Around -> will avoid the exclusion area by going around the area"
msgstr ""
"The strategy followed when encountering an exclusion area.\n"
"Can be:\n"
"- Over -> when encountering the area, the tool will go to a set height\n"
"- Around -> will avoid the exclusion area by going around the area"

#: appGUI/ObjectUI.py:1581
#: appGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:235
#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:436
#: appTools/ToolDrilling.py:2564 appTools/ToolMilling.py:2242
msgid "Over"
msgstr "Over"

#: appGUI/ObjectUI.py:1582
#: appGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:236
#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:437
#: appTools/ToolDrilling.py:2565 appTools/ToolMilling.py:2243
msgid "Around"
msgstr "Around"

#: appGUI/ObjectUI.py:1589
#: appGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:243
#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:444
#: appTools/ToolDrilling.py:2573 appTools/ToolMilling.py:2250
msgid ""
"The height Z to which the tool will rise in order to avoid\n"
"an interdiction area."
msgstr ""
"The height Z to which the tool will rise in order to avoid\n"
"an interdiction area."

#: appGUI/ObjectUI.py:1599 appTools/ToolDrilling.py:2584
#: appTools/ToolMilling.py:2260
msgid "Add area:"
msgstr "Add area:"

#: appGUI/ObjectUI.py:1600 appTools/ToolDrilling.py:2585
#: appTools/ToolMilling.py:2261
msgid "Add an Exclusion Area."
msgstr "Add an Exclusion Area."

#: appGUI/ObjectUI.py:1606
#: appGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:220
#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:421
#: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:305
#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:324
#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:286
#: appTools/ToolDrilling.py:2591 appTools/ToolIsolation.py:3532
#: appTools/ToolMilling.py:2267 appTools/ToolNCC.py:4453
#: appTools/ToolPaint.py:3154
msgid "The kind of selection shape used for area selection."
msgstr "The kind of selection shape used for area selection."

#: appGUI/ObjectUI.py:1616
#: appGUI/preferences/utilities/AutoCompletePrefGroupUI.py:32
#: appGUI/preferences/utilities/FAExcPrefGroupUI.py:42
#: appGUI/preferences/utilities/FAGcoPrefGroupUI.py:32
#: appGUI/preferences/utilities/FAGrbPrefGroupUI.py:32
#: appTools/ToolDrilling.py:2602 appTools/ToolMilling.py:2277
msgid "Delete All"
msgstr "Delete All"

#: appGUI/ObjectUI.py:1617 appTools/ToolDrilling.py:2603
#: appTools/ToolMilling.py:2278
msgid "Delete all exclusion areas."
msgstr "Delete all exclusion areas."

#: appGUI/ObjectUI.py:1620 appTools/ToolDrilling.py:2606
#: appTools/ToolMilling.py:2281
msgid "Delete Selected"
msgstr "Delete Selected"

#: appGUI/ObjectUI.py:1621 appTools/ToolDrilling.py:2607
#: appTools/ToolMilling.py:2282
msgid "Delete all exclusion areas that are selected in the table."
msgstr "Delete all exclusion areas that are selected in the table."

#: appGUI/ObjectUI.py:1631
#: appGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:261
msgid "Add Polish"
msgstr "Add Polish"

#: appGUI/ObjectUI.py:1633
#: appGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:263
msgid ""
"Will add a Paint section at the end of the GCode.\n"
"A metallic brush will clean the material after milling."
msgstr ""
"Will add a Paint section at the end of the GCode.\n"
"A metallic brush will clean the material after milling."

#: appGUI/ObjectUI.py:1641
#: appGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:270
msgid "Diameter for the polishing tool."
msgstr "Diameter for the polishing tool."

#: appGUI/ObjectUI.py:1667
#: appGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:294
msgid "Pressure"
msgstr "Pressure"

#: appGUI/ObjectUI.py:1669
#: appGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:296
msgid ""
"Negative value. The higher the absolute value\n"
"the stronger the pressure of the brush on the material."
msgstr ""
"Negative value. The higher the absolute value\n"
"the stronger the pressure of the brush on the material."

#: appGUI/ObjectUI.py:1711
#: appGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:335
msgid ""
"Algorithm for polishing:\n"
"- Standard: Fixed step inwards.\n"
"- Seed-based: Outwards from seed.\n"
"- Line-based: Parallel lines."
msgstr ""
"Algorithm for polishing:\n"
"- Standard: Fixed step inwards.\n"
"- Seed-based: Outwards from seed.\n"
"- Line-based: Parallel lines."

#: appGUI/ObjectUI.py:1763 appGUI/ObjectUI.py:1766
#: appTools/ToolDrilling.py:2629 appTools/ToolMilling.py:2304
msgid "Generate CNCJob object"
msgstr "Generate CNCJob object"

#: appGUI/ObjectUI.py:1768
msgid ""
"Add / Select at least one tool in the tool-table.\n"
"Click the # header to select all, or Ctrl + LMB\n"
"for custom selection of tools."
msgstr ""
"Add / Select at least one tool in the tool-table.\n"
"Click the # header to select all, or Ctrl + LMB\n"
"for custom selection of tools."

#: appGUI/ObjectUI.py:1787
msgid "Launch Paint Tool in Tools Tab."
msgstr "Launch Paint Tool in Tools Tab."

#: appGUI/ObjectUI.py:1795
msgid "Generate a CNCJob by milling a Geometry."
msgstr "Generate a CNCJob by milling a Geometry."

#: appGUI/ObjectUI.py:1811 appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:35
msgid ""
"Creates tool paths to cover the\n"
"whole area of a polygon."
msgstr ""
"Creates tool paths to cover the\n"
"whole area of a polygon."

#: appGUI/ObjectUI.py:1865
msgid "CNC Job Object"
msgstr "CNC Job Object"

#: appGUI/ObjectUI.py:1881 appGUI/preferences/cncjob/CNCJobOptPrefGroupUI.py:54
msgid ""
"This selects the kind of geometries on the canvas to plot.\n"
"Those can be either of type 'Travel' which means the moves\n"
"above the work piece or it can be of type 'Cut',\n"
"which means the moves that cut into the material."
msgstr ""
"This selects the kind of geometries on the canvas to plot.\n"
"Those can be either of type 'Travel' which means the moves\n"
"above the work piece or it can be of type 'Cut',\n"
"which means the moves that cut into the material."

#: appGUI/ObjectUI.py:1890 appGUI/preferences/cncjob/CNCJobOptPrefGroupUI.py:62
msgid "Travel"
msgstr "Travel"

#: appGUI/ObjectUI.py:1913
msgid "Edit an GCode object."
msgstr "Edit an GCode object."

#: appGUI/ObjectUI.py:1950 appGUI/preferences/cncjob/CNCJobOptPrefGroupUI.py:71
msgid "Display Annotation"
msgstr "Display Annotation"

#: appGUI/ObjectUI.py:1952 appGUI/preferences/cncjob/CNCJobOptPrefGroupUI.py:73
msgid ""
"This selects if to display text annotation on the plot.\n"
"When checked it will display numbers in order for each end\n"
"of a travel line."
msgstr ""
"This selects if to display text annotation on the plot.\n"
"When checked it will display numbers in order for each end\n"
"of a travel line."

#: appGUI/ObjectUI.py:1964 appObjects/FlatCAMObj.py:864
#: appTools/ToolProperties.py:558
msgid "Travelled distance"
msgstr "Travelled distance"

#: appGUI/ObjectUI.py:1966
msgid ""
"This is the total travelled distance on X-Y plane.\n"
"In current units."
msgstr ""
"This is the total travelled distance on X-Y plane.\n"
"In current units."

#: appGUI/ObjectUI.py:1977
msgid "Estimated time"
msgstr "Estimated time"

#: appGUI/ObjectUI.py:1979
msgid ""
"This is the estimated time to do the routing/drilling,\n"
"without the time spent in ToolChange events."
msgstr ""
"This is the estimated time to do the routing/drilling,\n"
"without the time spent in ToolChange events."

#: appGUI/ObjectUI.py:2003
msgid "CNC Tools Table"
msgstr "CNC Tools Table"

#: appGUI/ObjectUI.py:2006
msgid ""
"Tools in this CNCJob object used for cutting.\n"
"The tool diameter is used for plotting on canvas.\n"
"The 'Offset' entry will set an offset for the cut.\n"
"'Offset' can be inside, outside, on path (none) and custom.\n"
"'Type' entry is only informative and it allow to know the \n"
"intent of using the current tool. \n"
"It can be Rough(ing), Finish(ing) or Iso(lation).\n"
"The 'Tool type'(TT) can be circular with 1 to 4 teeths(C1..C4),\n"
"ball(B), or V-Shaped(V)."
msgstr ""
"Tools in this CNCJob object used for cutting.\n"
"The tool diameter is used for plotting on canvas.\n"
"The 'Offset' entry will set an offset for the cut.\n"
"'Offset' can be inside, outside, on path (none) and custom.\n"
"'Type' entry is only informative and it allow to know the \n"
"intent of using the current tool. \n"
"It can be Rough(ing), Finish(ing) or Iso(lation).\n"
"The 'Tool type'(TT) can be circular with 1 to 4 teeths(C1..C4),\n"
"ball(B), or V-Shaped(V)."

#: appGUI/ObjectUI.py:2055
msgid "Update Plot"
msgstr "Update Plot"

#: appGUI/ObjectUI.py:2057
msgid "Update the plot."
msgstr "Update the plot."

#: appGUI/ObjectUI.py:2067
msgid "Use CNC Code Snippets"
msgstr "Use CNC Code Snippets"

#: appGUI/ObjectUI.py:2069
msgid ""
"When selected, it will include CNC Code snippets (append and prepend)\n"
"defined in the Preferences."
msgstr ""
"When selected, it will include CNC Code snippets (append and prepend)\n"
"defined in the Preferences."

#: appGUI/ObjectUI.py:2075
#: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:64
msgid "Autolevelling"
msgstr "Autolevelling"

#: appGUI/ObjectUI.py:2078
msgid "Enable the autolevelling feature."
msgstr "Enable the autolevelling feature."

#: appGUI/ObjectUI.py:2106
msgid "Probe Points Table"
msgstr "Probe Points Table"

#: appGUI/ObjectUI.py:2107
msgid "Generate GCode that will obtain the height map"
msgstr "Generate GCode that will obtain the height map"

#: appGUI/ObjectUI.py:2109
msgid "Show"
msgstr "Show"

#: appGUI/ObjectUI.py:2110
msgid "Toggle the display of the Probe Points table."
msgstr "Toggle the display of the Probe Points table."

#: appGUI/ObjectUI.py:2123
msgid "X-Y Coordinates"
msgstr "X-Y Coordinates"

#: appGUI/ObjectUI.py:2123
msgid "Height"
msgstr "Height"

#: appGUI/ObjectUI.py:2127
msgid "Plot probing points"
msgstr "Plot probing points"

#: appGUI/ObjectUI.py:2129
msgid ""
"Plot the probing points in the table.\n"
"If a Voronoi method is used then\n"
"the Voronoi areas are also plotted."
msgstr ""
"Plot the probing points in the table.\n"
"If a Voronoi method is used then\n"
"the Voronoi areas are also plotted."

#: appGUI/ObjectUI.py:2144
msgid "Probe GCode Generation"
msgstr "Probe GCode Generation"

#: appGUI/ObjectUI.py:2146
msgid ""
"Will create a GCode which will be sent to the controller,\n"
"either through a file or directly, with the intent to get the height map\n"
"that is to modify the original GCode to level the cutting height."
msgstr ""
"Will create a GCode which will be sent to the controller,\n"
"either through a file or directly, with the intent to get the height map\n"
"that is to modify the original GCode to level the cutting height."

#: appGUI/ObjectUI.py:2153
#: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:119
msgid "Probe Z travel"
msgstr "Probe Z travel"

#: appGUI/ObjectUI.py:2155
#: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:121
msgid "The safe Z for probe travelling between probe points."
msgstr "The safe Z for probe travelling between probe points."

#: appGUI/ObjectUI.py:2178
#: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:144
msgid "Probe Feedrate"
msgstr "Probe Feedrate"

#: appGUI/ObjectUI.py:2195
#: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:71
msgid "Mode"
msgstr "Mode"

#: appGUI/ObjectUI.py:2196
#: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:72
msgid ""
"Choose a mode for height map generation.\n"
"- Manual: will pick a selection of probe points by clicking on canvas\n"
"- Grid: will automatically generate a grid of probe points"
msgstr ""
"Choose a mode for height map generation.\n"
"- Manual: will pick a selection of probe points by clicking on canvas\n"
"- Grid: will automatically generate a grid of probe points"

#: appGUI/ObjectUI.py:2202
#: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:78
#: appGUI/preferences/tools/Tools2FiducialsPrefGroupUI.py:74
#: appTools/ToolCutOut.py:2341 appTools/ToolFiducials.py:830
msgid "Manual"
msgstr "Manual"

#: appGUI/ObjectUI.py:2203
#: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:79 app_Main.py:7565
msgid "Grid"
msgstr "Grid"

#: appGUI/ObjectUI.py:2210
#: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:86
msgid ""
"Choose a method for approximation of heights from autolevelling data.\n"
"- Voronoi: will generate a Voronoi diagram\n"
"- Bilinear: will use bilinear interpolation. Usable only for grid mode."
msgstr ""
"Choose a method for approximation of heights from autolevelling data.\n"
"- Voronoi: will generate a Voronoi diagram\n"
"- Bilinear: will use bilinear interpolation. Usable only for grid mode."

#: appGUI/ObjectUI.py:2216
#: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:92
msgid "Voronoi"
msgstr "Voronoi"

#: appGUI/ObjectUI.py:2217
#: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:93
msgid "Bilinear"
msgstr "Bilinear"

#: appGUI/ObjectUI.py:2230
#: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:101
#: appGUI/preferences/tools/ToolsPanelizePrefGroupUI.py:77
#: appTools/ToolPanelize.py:788
msgid "Columns"
msgstr "Columns"

#: appGUI/ObjectUI.py:2232
#: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:103
msgid "The number of grid columns."
msgstr "The number of grid columns."

#: appGUI/ObjectUI.py:2241
#: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:111
#: appGUI/preferences/tools/ToolsPanelizePrefGroupUI.py:89
#: appTools/ToolPanelize.py:798
msgid "Rows"
msgstr "Rows"

#: appGUI/ObjectUI.py:2243
#: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:113
msgid "The number of grid rows."
msgstr "The number of grid rows."

#: appGUI/ObjectUI.py:2248
msgid "Add Probe Points"
msgstr "Add Probe Points"

#: appGUI/ObjectUI.py:2256
#: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:160
msgid "Controller"
msgstr "Controller"

#: appGUI/ObjectUI.py:2258
#: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:162
msgid ""
"The kind of controller for which to generate\n"
"height map gcode."
msgstr ""
"The kind of controller for which to generate\n"
"height map gcode."

#: appGUI/ObjectUI.py:2304 appGUI/ObjectUI.py:2319
#: appObjects/FlatCAMCNCJob.py:1312 appObjects/FlatCAMCNCJob.py:1334
msgid "Control"
msgstr "Control"

#: appGUI/ObjectUI.py:2314 appGUI/ObjectUI.py:2321
#: appObjects/FlatCAMCNCJob.py:1314 appObjects/FlatCAMCNCJob.py:1336
msgid "Sender"
msgstr "Sender"

#: appGUI/ObjectUI.py:2335
msgid "COM list"
msgstr "COM list"

#: appGUI/ObjectUI.py:2337 appGUI/ObjectUI.py:2352
msgid "Lists the available serial ports."
msgstr "Lists the available serial ports."

#: appGUI/ObjectUI.py:2341
msgid "Search"
msgstr "Search"

#: appGUI/ObjectUI.py:2343
msgid "Search for the available serial ports."
msgstr "Search for the available serial ports."

#: appGUI/ObjectUI.py:2350
msgid "Baud rates"
msgstr "Baud rates"

#: appGUI/ObjectUI.py:2369
msgid "New, custom baudrate."
msgstr "New, custom baudrate."

#: appGUI/ObjectUI.py:2377
msgid "Add the specified custom baudrate to the list."
msgstr "Add the specified custom baudrate to the list."

#: appGUI/ObjectUI.py:2383
msgid "Delete selected baudrate"
msgstr "Delete selected baudrate"

#: appGUI/ObjectUI.py:2387
msgid "Reset"
msgstr "Reset"

#: appGUI/ObjectUI.py:2389
msgid "Software reset of the controller."
msgstr "Software reset of the controller."

#: appGUI/ObjectUI.py:2395 appObjects/FlatCAMCNCJob.py:1328
msgid "Disconnected"
msgstr "Disconnected"

#: appGUI/ObjectUI.py:2397
msgid "Connect to the selected port with the selected baud rate."
msgstr "Connect to the selected port with the selected baud rate."

#: appGUI/ObjectUI.py:2422
msgid "Jog"
msgstr "Jog"

#: appGUI/ObjectUI.py:2430
msgid "Zero Axes"
msgstr "Zero Axes"

#: appGUI/ObjectUI.py:2463
msgid "Pause/Resume"
msgstr "Pause/Resume"

#: appGUI/ObjectUI.py:2485
#: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:172
msgid "Step"
msgstr "Step"

#: appGUI/ObjectUI.py:2487
#: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:174
msgid "Each jog action will move the axes with this value."
msgstr "Each jog action will move the axes with this value."

#: appGUI/ObjectUI.py:2499
#: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:185
#: appGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:89
#: appObjects/FlatCAMObj.py:831 appTools/ToolProperties.py:525
msgid "Feedrate"
msgstr "Feedrate"

#: appGUI/ObjectUI.py:2501
#: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:187
msgid "Feedrate when jogging."
msgstr "Feedrate when jogging."

#: appGUI/ObjectUI.py:2521
msgid "Send Command"
msgstr "Send Command"

#: appGUI/ObjectUI.py:2523 appGUI/ObjectUI.py:2533
msgid "Send a custom command to GRBL."
msgstr "Send a custom command to GRBL."

#: appGUI/ObjectUI.py:2528
msgid "Type GRBL command ..."
msgstr "Type GRBL command ..."

#: appGUI/ObjectUI.py:2531
msgid "Send"
msgstr "Send"

#: appGUI/ObjectUI.py:2539
msgid "Get Config parameter"
msgstr "Get Config parameter"

#: appGUI/ObjectUI.py:2541
msgid "A GRBL configuration parameter."
msgstr "A GRBL configuration parameter."

#: appGUI/ObjectUI.py:2546
msgid "Type GRBL parameter ..."
msgstr "Type GRBL parameter ..."

#: appGUI/ObjectUI.py:2549
msgid "Get"
msgstr "Get"

#: appGUI/ObjectUI.py:2551
msgid "Get the value of a specified GRBL parameter."
msgstr "Get the value of a specified GRBL parameter."

#: appGUI/ObjectUI.py:2559
msgid "Get Report"
msgstr "Get Report"

#: appGUI/ObjectUI.py:2561
msgid "Print in shell the GRBL report."
msgstr "Print in shell the GRBL report."

#: appGUI/ObjectUI.py:2567
msgid "Apply AutoLevelling"
msgstr "Apply AutoLevelling"

#: appGUI/ObjectUI.py:2569
msgid ""
"Will send the probing GCode to the GRBL controller,\n"
"wait for the Z probing data and then apply this data\n"
"over the original GCode therefore doing autolevelling."
msgstr ""
"Will send the probing GCode to the GRBL controller,\n"
"wait for the Z probing data and then apply this data\n"
"over the original GCode therefore doing autolevelling."

#: appGUI/ObjectUI.py:2578
msgid "Will save the GRBL height map."
msgstr "Will save the GRBL height map."

#: appGUI/ObjectUI.py:2588
msgid "Save Probing GCode"
msgstr "Save Probing GCode"

#: appGUI/ObjectUI.py:2590
msgid "Will save the probing GCode."
msgstr "Will save the probing GCode."

#: appGUI/ObjectUI.py:2599
msgid "View/Edit the probing GCode."
msgstr "View/Edit the probing GCode."

#: appGUI/ObjectUI.py:2606 appObjects/FlatCAMCNCJob.py:1747
#: appObjects/FlatCAMCNCJob.py:1751
msgid "Import Height Map"
msgstr "Import Height Map"

#: appGUI/ObjectUI.py:2608
msgid ""
"Import the file that has the Z heights\n"
"obtained through probing and then apply this data\n"
"over the original GCode therefore\n"
"doing autolevelling."
msgstr ""
"Import the file that has the Z heights\n"
"obtained through probing and then apply this data\n"
"over the original GCode therefore\n"
"doing autolevelling."

#: appGUI/ObjectUI.py:2626
msgid "Export CNC Code"
msgstr "Export CNC Code"

#: appGUI/ObjectUI.py:2628
#: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:37
#: appGUI/preferences/cncjob/CNCJobOptPrefGroupUI.py:33
msgid ""
"Export and save G-Code to\n"
"make this object to a file."
msgstr ""
"Export and save G-Code to\n"
"make this object to a file."

#: appGUI/ObjectUI.py:2637
msgid "Save CNC Code"
msgstr "Save CNC Code"

#: appGUI/ObjectUI.py:2640
msgid ""
"Opens dialog to save G-Code\n"
"file."
msgstr ""
"Opens dialog to save G-Code\n"
"file."

#: appGUI/ObjectUI.py:2647
msgid "Review CNC Code."
msgstr "Review CNC Code."

#: appGUI/ObjectUI.py:2708
msgid "Script Object"
msgstr "Script Object"

#: appGUI/ObjectUI.py:2728 appGUI/ObjectUI.py:2802
msgid "Auto Completer"
msgstr "Auto Completer"

#: appGUI/ObjectUI.py:2730
msgid "This selects if the auto completer is enabled in the Script Editor."
msgstr "This selects if the auto completer is enabled in the Script Editor."

#: appGUI/ObjectUI.py:2775
msgid "Document Object"
msgstr "Document Object"

#: appGUI/ObjectUI.py:2804
msgid "This selects if the auto completer is enabled in the Document Editor."
msgstr "This selects if the auto completer is enabled in the Document Editor."

#: appGUI/ObjectUI.py:2822
msgid "Font Type"
msgstr "Font Type"

#: appGUI/ObjectUI.py:2839
#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:189
msgid "Font Size"
msgstr "Font Size"

#: appGUI/ObjectUI.py:2875
msgid "Alignment"
msgstr "Alignment"

#: appGUI/ObjectUI.py:2880
msgid "Align Left"
msgstr "Align Left"

#: appGUI/ObjectUI.py:2885 app_Main.py:5130
msgid "Center"
msgstr "Center"

#: appGUI/ObjectUI.py:2890
msgid "Align Right"
msgstr "Align Right"

#: appGUI/ObjectUI.py:2895
msgid "Justify"
msgstr "Justify"

#: appGUI/ObjectUI.py:2902
msgid "Font Color"
msgstr "Font Color"

#: appGUI/ObjectUI.py:2904
msgid "Set the font color for the selected text"
msgstr "Set the font color for the selected text"

#: appGUI/ObjectUI.py:2918
msgid "Selection Color"
msgstr "Selection Color"

#: appGUI/ObjectUI.py:2920
msgid "Set the selection color when doing text selection."
msgstr "Set the selection color when doing text selection."

#: appGUI/ObjectUI.py:2934
msgid "Tab Size"
msgstr "Tab Size"

#: appGUI/ObjectUI.py:2936
msgid "Set the tab size. In pixels. Default value is 80 pixels."
msgstr "Set the tab size. In pixels. Default value is 80 pixels."

#: appGUI/PlotCanvas.py:238 appGUI/PlotCanvasLegacy.py:355
msgid "Axis enabled."
msgstr "Axis enabled."

#: appGUI/PlotCanvas.py:246 appGUI/PlotCanvasLegacy.py:364
msgid "Axis disabled."
msgstr "Axis disabled."

#: appGUI/PlotCanvas.py:265 appGUI/PlotCanvasLegacy.py:385
msgid "HUD enabled."
msgstr "HUD enabled."

#: appGUI/PlotCanvas.py:274 appGUI/PlotCanvasLegacy.py:392
msgid "HUD disabled."
msgstr "HUD disabled."

#: appGUI/PlotCanvas.py:284 appGUI/PlotCanvasLegacy.py:467
msgid "Grid enabled."
msgstr "Grid enabled."

#: appGUI/PlotCanvas.py:290 appGUI/PlotCanvasLegacy.py:477
msgid "Grid disabled."
msgstr "Grid disabled."

#: appGUI/PlotCanvasLegacy.py:1548
msgid ""
"Could not annotate due of a difference between the number of text elements "
"and the number of text positions."
msgstr ""
"Could not annotate due of a difference between the number of text elements "
"and the number of text positions."

#: appGUI/preferences/PreferencesUIManager.py:923
msgid "Preferences applied."
msgstr "Preferences applied."

#: appGUI/preferences/PreferencesUIManager.py:943
msgid "Are you sure you want to continue?"
msgstr "Are you sure you want to continue?"

#: appGUI/preferences/PreferencesUIManager.py:944
msgid "Application will restart"
msgstr "Application will restart"

#: appGUI/preferences/PreferencesUIManager.py:1042
msgid "Preferences closed without saving."
msgstr "Preferences closed without saving."

#: appGUI/preferences/PreferencesUIManager.py:1054
msgid "Preferences default values are restored."
msgstr "Preferences default values are restored."

#: appGUI/preferences/PreferencesUIManager.py:1085 app_Main.py:2833
#: app_Main.py:9670
msgid "Failed to write defaults to file."
msgstr "Failed to write defaults to file."

#: appGUI/preferences/PreferencesUIManager.py:1089
#: appGUI/preferences/PreferencesUIManager.py:1204
msgid "Preferences saved."
msgstr "Preferences saved."

#: appGUI/preferences/PreferencesUIManager.py:1139
msgid "Preferences edited but not saved."
msgstr "Preferences edited but not saved."

#: appGUI/preferences/PreferencesUIManager.py:1189
msgid ""
"One or more values are changed.\n"
"Do you want to save the Preferences?"
msgstr ""
"One or more values are changed.\n"
"Do you want to save the Preferences?"

#: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:27
msgid "CNC Job Adv. Options"
msgstr "CNC Job Adv. Options"

#: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:35
#: appGUI/preferences/cncjob/CNCJobEditorPrefGroupUI.py:31
#: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:30
#: appGUI/preferences/geometry/GeometryEditorPrefGroupUI.py:31
#: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:31
#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:37
#: appGUI/preferences/tools/Tools2CalPrefGroupUI.py:36
#: appGUI/preferences/tools/Tools2EDrillsPrefGroupUI.py:36
#: appGUI/preferences/tools/Tools2FiducialsPrefGroupUI.py:36
#: appGUI/preferences/tools/Tools2InvertPrefGroupUI.py:31
#: appGUI/preferences/tools/Tools2OptimalPrefGroupUI.py:31
#: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:36
#: appGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:31
#: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:30
#: appGUI/preferences/tools/Tools2sidedPrefGroupUI.py:31
#: appGUI/preferences/tools/ToolsCornersPrefGroupUI.py:35
#: appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:32
#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:31
#: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:31
#: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:30
#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:31
#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:33
#: appGUI/preferences/tools/ToolsPanelizePrefGroupUI.py:31
#: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:31
#: appGUI/preferences/tools/ToolsSubPrefGroupUI.py:31
#: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:31
#: appTools/ToolCalibration.py:762 appTools/ToolCopperThieving.py:1262
#: appTools/ToolCorners.py:539 appTools/ToolEtchCompensation.py:356
#: appTools/ToolFiducials.py:792 appTools/ToolInvertGerber.py:225
#: appTools/ToolQRCode.py:702
msgid "Parameters"
msgstr "Parameters"

#: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:43
msgid "Annotation Size"
msgstr "Annotation Size"

#: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:45
msgid "The font size of the annotation text. In pixels."
msgstr "The font size of the annotation text. In pixels."

#: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:54
msgid "Annotation Color"
msgstr "Annotation Color"

#: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:56
msgid "Set the font color for the annotation texts."
msgstr "Set the font color for the annotation texts."

#: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:66
msgid "Parameters for the autolevelling."
msgstr "Parameters for the autolevelling."

#: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:200
msgid "Safe height (Z) distance when jogging to origin."
msgstr "Safe height (Z) distance when jogging to origin."

#: appGUI/preferences/cncjob/CNCJobEditorPrefGroupUI.py:27
msgid "CNC Job Editor"
msgstr "CNC Job Editor"

#: appGUI/preferences/cncjob/CNCJobEditorPrefGroupUI.py:33
#: appGUI/preferences/geometry/GeometryEditorPrefGroupUI.py:33
msgid "A list of Editor parameters."
msgstr "A list of Editor parameters."

#: appGUI/preferences/cncjob/CNCJobEditorPrefGroupUI.py:46
msgid "Prepend to G-Code"
msgstr "Prepend to G-Code"

#: appGUI/preferences/cncjob/CNCJobEditorPrefGroupUI.py:48
msgid ""
"Type here any G-Code commands you would\n"
"like to add at the beginning of the G-Code file."
msgstr ""
"Type here any G-Code commands you would\n"
"like to add at the beginning of the G-Code file."

#: appGUI/preferences/cncjob/CNCJobEditorPrefGroupUI.py:55
msgid ""
"Type here any G-Code commands you would like to add at the beginning of the "
"G-Code file."
msgstr ""
"Type here any G-Code commands you would like to add at the beginning of the "
"G-Code file."

#: appGUI/preferences/cncjob/CNCJobEditorPrefGroupUI.py:62
msgid "Append to G-Code"
msgstr "Append to G-Code"

#: appGUI/preferences/cncjob/CNCJobEditorPrefGroupUI.py:64
msgid ""
"Type here any G-Code commands you would\n"
"like to append to the generated file.\n"
"I.e.: M2 (End of program)"
msgstr ""
"Type here any G-Code commands you would\n"
"like to append to the generated file.\n"
"I.e.: M2 (End of program)"

#: appGUI/preferences/cncjob/CNCJobEditorPrefGroupUI.py:72
msgid ""
"Type here any G-Code commands you would like to append to the generated "
"file.\n"
"I.e.: M2 (End of program)"
msgstr ""
"Type here any G-Code commands you would like to append to the generated "
"file.\n"
"I.e.: M2 (End of program)"

#: appGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:26
msgid "CNC Job General"
msgstr "CNC Job General"

#: appGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:47
#: appGUI/preferences/geometry/GeometryGenPrefGroupUI.py:59
#: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:59
#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:45
msgid "Circle Steps"
msgstr "Circle Steps"

#: appGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:49
msgid ""
"The number of circle steps for <b>GCode</b> \n"
"circle and arc shapes linear approximation."
msgstr ""
"The number of circle steps for <b>GCode</b> \n"
"circle and arc shapes linear approximation."

#: appGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:58
msgid "Travel dia"
msgstr "Travel dia"

#: appGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:60
msgid ""
"The width of the travel lines to be\n"
"rendered in the plot."
msgstr ""
"The width of the travel lines to be\n"
"rendered in the plot."

#: appGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:73
msgid "G-code Decimals"
msgstr "G-code Decimals"

#: appGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:76
#: appTools/ToolFiducials.py:711
msgid "Coordinates"
msgstr "Coordinates"

#: appGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:78
msgid ""
"The number of decimals to be used for \n"
"the X, Y, Z coordinates in CNC code (GCODE, etc.)"
msgstr ""
"The number of decimals to be used for \n"
"the X, Y, Z coordinates in CNC code (GCODE, etc.)"

#: appGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:91
msgid ""
"The number of decimals to be used for \n"
"the Feedrate parameter in CNC code (GCODE, etc.)"
msgstr ""
"The number of decimals to be used for \n"
"the Feedrate parameter in CNC code (GCODE, etc.)"

#: appGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:102
msgid "Coordinates type"
msgstr "Coordinates type"

#: appGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:104
msgid ""
"The type of coordinates to be used in Gcode.\n"
"Can be:\n"
"- Absolute G90 -> the reference is the origin x=0, y=0\n"
"- Incremental G91 -> the reference is the previous position"
msgstr ""
"The type of coordinates to be used in Gcode.\n"
"Can be:\n"
"- Absolute G90 -> the reference is the origin x=0, y=0\n"
"- Incremental G91 -> the reference is the previous position"

#: appGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:110
msgid "Absolute G90"
msgstr "Absolute G90"

#: appGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:111
msgid "Incremental G91"
msgstr "Incremental G91"

#: appGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:121
msgid "Force Windows style line-ending"
msgstr "Force Windows style line-ending"

#: appGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:123
msgid ""
"When checked will force a Windows style line-ending\n"
"(\\r\\n) on non-Windows OS's."
msgstr ""
"When checked will force a Windows style line-ending\n"
"(\\r\\n) on non-Windows OS's."

#: appGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:135
msgid "Travel Line Color"
msgstr "Travel Line Color"

#: appGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:139
#: appGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:180
#: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:275
#: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:154
#: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:195
#: appGUI/preferences/geometry/GeometryGenPrefGroupUI.py:158
#: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:169
#: appTools/ToolRulesCheck.py:1296
msgid "Outline"
msgstr "Outline"

#: appGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:141
msgid "Set the travel line color for plotted objects."
msgstr "Set the travel line color for plotted objects."

#: appGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:149
#: appGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:190
#: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:285
#: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:163
#: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:205
#: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:179
msgid "Fill"
msgstr "Fill"

#: appGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:151
#: appGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:192
#: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:287
#: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:181
msgid ""
"Set the fill color for plotted objects.\n"
"First 6 digits are the color and the last 2\n"
"digits are for alpha (transparency) level."
msgstr ""
"Set the fill color for plotted objects.\n"
"First 6 digits are the color and the last 2\n"
"digits are for alpha (transparency) level."

#: appGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:161
#: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:297
#: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:176
#: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:218
#: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:191
msgid "Alpha"
msgstr "Alpha"

#: appGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:163
#: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:299
#: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:193
msgid "Set the fill transparency for plotted objects."
msgstr "Set the fill transparency for plotted objects."

#: appGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:176
#: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:271
#: appGUI/preferences/geometry/GeometryGenPrefGroupUI.py:154
#: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:165
msgid "Object Color"
msgstr "Object Color"

#: appGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:182
msgid "Set the color for plotted objects."
msgstr "Set the color for plotted objects."

#: appGUI/preferences/cncjob/CNCJobOptPrefGroupUI.py:27
msgid "CNC Job Options"
msgstr "CNC Job Options"

#: appGUI/preferences/cncjob/CNCJobOptPrefGroupUI.py:31
msgid "Export G-Code"
msgstr "Export G-Code"

#: appGUI/preferences/cncjob/CNCJobOptPrefGroupUI.py:52
msgid "Plot kind"
msgstr "Plot kind"

#: appGUI/preferences/excellon/ExcellonAdvOptPrefGroupUI.py:27
msgid "Excellon Adv. Options"
msgstr "Excellon Adv. Options"

#: appGUI/preferences/excellon/ExcellonAdvOptPrefGroupUI.py:34
#: appGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:34
#: appGUI/preferences/gerber/GerberAdvOptPrefGroupUI.py:31
#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:277
msgid "Advanced Options"
msgstr "Advanced Options"

#: appGUI/preferences/excellon/ExcellonAdvOptPrefGroupUI.py:36
msgid ""
"A list of Excellon advanced parameters.\n"
"Those parameters are available only for\n"
"Advanced App. Level."
msgstr ""
"A list of Excellon advanced parameters.\n"
"Those parameters are available only for\n"
"Advanced App. Level."

#: appGUI/preferences/excellon/ExcellonAdvOptPrefGroupUI.py:48
#: appGUI/preferences/gerber/GerberAdvOptPrefGroupUI.py:52
msgid "Table Show/Hide"
msgstr "Table Show/Hide"

#: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:32
msgid "A list of Excellon Editor parameters."
msgstr "A list of Excellon Editor parameters."

#: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:40
#: appGUI/preferences/geometry/GeometryEditorPrefGroupUI.py:41
#: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:41
#: appGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:172
msgid "Selection limit"
msgstr "Selection limit"

#: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:42
msgid ""
"Set the number of selected Excellon geometry\n"
"items above which the utility geometry\n"
"becomes just a selection rectangle.\n"
"Increases the performance when moving a\n"
"large number of geometric elements."
msgstr ""
"Set the number of selected Excellon geometry\n"
"items above which the utility geometry\n"
"becomes just a selection rectangle.\n"
"Increases the performance when moving a\n"
"large number of geometric elements."

#: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:55
#: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:134
#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:117
#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:121
msgid "New Dia"
msgstr "New Dia"

#: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:80
msgid "Linear Drill Array"
msgstr "Linear Drill Array"

#: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:84
#: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:232
#: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:121
msgid "Linear Direction"
msgstr "Linear Direction"

#: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:126
msgid "Circular Drill Array"
msgstr "Circular Drill Array"

#: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:130
#: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:280
#: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:165
msgid "Circular Direction"
msgstr "Circular Direction"

#: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:132
#: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:282
#: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:167
msgid ""
"Direction for circular array.\n"
"Can be CW = clockwise or CCW = counter clockwise."
msgstr ""
"Direction for circular array.\n"
"Can be CW = clockwise or CCW = counter clockwise."

#: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:143
#: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:293
#: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:178
msgid "Circular Angle"
msgstr "Circular Angle"

#: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:196
msgid ""
"Angle at which the slot is placed.\n"
"The precision is of max 2 decimals.\n"
"Min value is: -359.99 degrees.\n"
"Max value is:  360.00 degrees."
msgstr ""
"Angle at which the slot is placed.\n"
"The precision is of max 2 decimals.\n"
"Min value is: -359.99 degrees.\n"
"Max value is:  360.00 degrees."

#: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:215
msgid "Linear Slot Array"
msgstr "Linear Slot Array"

#: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:276
msgid "Circular Slot Array"
msgstr "Circular Slot Array"

#: appGUI/preferences/excellon/ExcellonExpPrefGroupUI.py:26
msgid "Excellon Export"
msgstr "Excellon Export"

#: appGUI/preferences/excellon/ExcellonExpPrefGroupUI.py:30
#: appGUI/preferences/gerber/GerberExpPrefGroupUI.py:31
msgid "Export Options"
msgstr "Export Options"

#: appGUI/preferences/excellon/ExcellonExpPrefGroupUI.py:32
msgid ""
"The parameters set here are used in the file exported\n"
"when using the File -> Export -> Export Excellon menu entry."
msgstr ""
"The parameters set here are used in the file exported\n"
"when using the File -> Export -> Export Excellon menu entry."

#: appGUI/preferences/excellon/ExcellonExpPrefGroupUI.py:41
#: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:172
#: appGUI/preferences/general/GeneralAppPrefGroupUI.py:39
#: appGUI/preferences/gerber/GerberExpPrefGroupUI.py:42
#: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:82
#: appTools/ToolDistance.py:563 appTools/ToolDistanceMin.py:237
#: appTools/ToolPcbWizard.py:455 appTools/ToolProperties.py:153
msgid "Units"
msgstr "Units"

#: appGUI/preferences/excellon/ExcellonExpPrefGroupUI.py:43
#: appGUI/preferences/excellon/ExcellonExpPrefGroupUI.py:49
msgid "The units used in the Excellon file."
msgstr "The units used in the Excellon file."

#: appGUI/preferences/excellon/ExcellonExpPrefGroupUI.py:46
#: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:96
#: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:182
#: appGUI/preferences/gerber/GerberExpPrefGroupUI.py:47
#: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:87
#: appTools/ToolCalculators.py:227 appTools/ToolPcbWizard.py:453
msgid "INCH"
msgstr "INCH"

#: appGUI/preferences/excellon/ExcellonExpPrefGroupUI.py:47
#: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:183
#: appGUI/preferences/general/GeneralAppPrefGroupUI.py:43
#: appGUI/preferences/gerber/GerberExpPrefGroupUI.py:48
#: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:88
#: appTools/ToolCalculators.py:228 appTools/ToolPcbWizard.py:454
msgid "MM"
msgstr "MM"

#: appGUI/preferences/excellon/ExcellonExpPrefGroupUI.py:55
#: appGUI/preferences/gerber/GerberExpPrefGroupUI.py:56
msgid "Int/Decimals"
msgstr "Int/Decimals"

#: appGUI/preferences/excellon/ExcellonExpPrefGroupUI.py:57
msgid ""
"The NC drill files, usually named Excellon files\n"
"are files that can be found in different formats.\n"
"Here we set the format used when the provided\n"
"coordinates are not using period."
msgstr ""
"The NC drill files, usually named Excellon files\n"
"are files that can be found in different formats.\n"
"Here we set the format used when the provided\n"
"coordinates are not using period."

#: appGUI/preferences/excellon/ExcellonExpPrefGroupUI.py:69
#: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:104
#: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:133
msgid ""
"This numbers signify the number of digits in\n"
"the whole part of Excellon coordinates."
msgstr ""
"This numbers signify the number of digits in\n"
"the whole part of Excellon coordinates."

#: appGUI/preferences/excellon/ExcellonExpPrefGroupUI.py:82
#: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:117
#: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:146
msgid ""
"This numbers signify the number of digits in\n"
"the decimal part of Excellon coordinates."
msgstr ""
"This numbers signify the number of digits in\n"
"the decimal part of Excellon coordinates."

#: appGUI/preferences/excellon/ExcellonExpPrefGroupUI.py:91
msgid "Format"
msgstr "Format"

#: appGUI/preferences/excellon/ExcellonExpPrefGroupUI.py:93
#: appGUI/preferences/excellon/ExcellonExpPrefGroupUI.py:103
msgid ""
"Select the kind of coordinates format used.\n"
"Coordinates can be saved with decimal point or without.\n"
"When there is no decimal point, it is required to specify\n"
"the number of digits for integer part and the number of decimals.\n"
"Also it will have to be specified if LZ = leading zeros are kept\n"
"or TZ = trailing zeros are kept."
msgstr ""
"Select the kind of coordinates format used.\n"
"Coordinates can be saved with decimal point or without.\n"
"When there is no decimal point, it is required to specify\n"
"the number of digits for integer part and the number of decimals.\n"
"Also it will have to be specified if LZ = leading zeros are kept\n"
"or TZ = trailing zeros are kept."

#: appGUI/preferences/excellon/ExcellonExpPrefGroupUI.py:100
msgid "Decimal"
msgstr "Decimal"

#: appGUI/preferences/excellon/ExcellonExpPrefGroupUI.py:101
msgid "No-Decimal"
msgstr "No-Decimal"

#: appGUI/preferences/excellon/ExcellonExpPrefGroupUI.py:114
#: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:154
#: appGUI/preferences/gerber/GerberExpPrefGroupUI.py:96
#: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:97
msgid "Zeros"
msgstr "Zeros"

#: appGUI/preferences/excellon/ExcellonExpPrefGroupUI.py:117
msgid ""
"This sets the type of Excellon zeros.\n"
"If LZ then Leading Zeros are kept and\n"
"Trailing Zeros are removed.\n"
"If TZ is checked then Trailing Zeros are kept\n"
"and Leading Zeros are removed."
msgstr ""
"This sets the type of Excellon zeros.\n"
"If LZ then Leading Zeros are kept and\n"
"Trailing Zeros are removed.\n"
"If TZ is checked then Trailing Zeros are kept\n"
"and Leading Zeros are removed."

#: appGUI/preferences/excellon/ExcellonExpPrefGroupUI.py:124
#: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:167
#: appGUI/preferences/gerber/GerberExpPrefGroupUI.py:106
#: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:107
#: appTools/ToolPcbWizard.py:439
msgid "LZ"
msgstr "LZ"

#: appGUI/preferences/excellon/ExcellonExpPrefGroupUI.py:125
#: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:168
#: appGUI/preferences/gerber/GerberExpPrefGroupUI.py:107
#: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:108
#: appTools/ToolPcbWizard.py:440
msgid "TZ"
msgstr "TZ"

#: appGUI/preferences/excellon/ExcellonExpPrefGroupUI.py:127
msgid ""
"This sets the default type of Excellon zeros.\n"
"If LZ then Leading Zeros are kept and\n"
"Trailing Zeros are removed.\n"
"If TZ is checked then Trailing Zeros are kept\n"
"and Leading Zeros are removed."
msgstr ""
"This sets the default type of Excellon zeros.\n"
"If LZ then Leading Zeros are kept and\n"
"Trailing Zeros are removed.\n"
"If TZ is checked then Trailing Zeros are kept\n"
"and Leading Zeros are removed."

#: appGUI/preferences/excellon/ExcellonExpPrefGroupUI.py:137
msgid "Slot type"
msgstr "Slot type"

#: appGUI/preferences/excellon/ExcellonExpPrefGroupUI.py:140
#: appGUI/preferences/excellon/ExcellonExpPrefGroupUI.py:150
msgid ""
"This sets how the slots will be exported.\n"
"If ROUTED then the slots will be routed\n"
"using M15/M16 commands.\n"
"If DRILLED(G85) the slots will be exported\n"
"using the Drilled slot command (G85)."
msgstr ""
"This sets how the slots will be exported.\n"
"If ROUTED then the slots will be routed\n"
"using M15/M16 commands.\n"
"If DRILLED(G85) the slots will be exported\n"
"using the Drilled slot command (G85)."

#: appGUI/preferences/excellon/ExcellonExpPrefGroupUI.py:147
msgid "Routed"
msgstr "Routed"

#: appGUI/preferences/excellon/ExcellonExpPrefGroupUI.py:148
msgid "Drilled(G85)"
msgstr "Drilled(G85)"

#: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:29
msgid "Excellon General"
msgstr "Excellon General"

#: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:54
#: appGUI/preferences/geometry/GeometryGenPrefGroupUI.py:47
#: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:52
msgid "M-Color"
msgstr "M-Color"

#: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:71
msgid "Excellon Format"
msgstr "Excellon Format"

#: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:73
msgid ""
"The NC drill files, usually named Excellon files\n"
"are files that can be found in different formats.\n"
"Here we set the format used when the provided\n"
"coordinates are not using period.\n"
"\n"
"Possible presets:\n"
"\n"
"PROTEUS 3:3 MM LZ\n"
"DipTrace 5:2 MM TZ\n"
"DipTrace 4:3 MM LZ\n"
"\n"
"EAGLE 3:3 MM TZ\n"
"EAGLE 4:3 MM TZ\n"
"EAGLE 2:5 INCH TZ\n"
"EAGLE 3:5 INCH TZ\n"
"\n"
"ALTIUM 2:4 INCH LZ\n"
"Sprint Layout 2:4 INCH LZ\n"
"KiCAD 3:5 INCH TZ"
msgstr ""
"The NC drill files, usually named Excellon files\n"
"are files that can be found in different formats.\n"
"Here we set the format used when the provided\n"
"coordinates are not using period.\n"
"\n"
"Possible presets:\n"
"\n"
"PROTEUS 3:3 MM LZ\n"
"DipTrace 5:2 MM TZ\n"
"DipTrace 4:3 MM LZ\n"
"\n"
"EAGLE 3:3 MM TZ\n"
"EAGLE 4:3 MM TZ\n"
"EAGLE 2:5 INCH TZ\n"
"EAGLE 3:5 INCH TZ\n"
"\n"
"ALTIUM 2:4 INCH LZ\n"
"Sprint Layout 2:4 INCH LZ\n"
"KiCAD 3:5 INCH TZ"

#: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:97
msgid "Default values for INCH are 2:4"
msgstr "Default values for INCH are 2:4"

#: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:125
msgid "METRIC"
msgstr "METRIC"

#: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:126
msgid "Default values for METRIC are 3:3"
msgstr "Default values for METRIC are 3:3"

#: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:157
msgid ""
"This sets the type of Excellon zeros.\n"
"If LZ then Leading Zeros are kept and\n"
"Trailing Zeros are removed.\n"
"If TZ is checked then Trailing Zeros are kept\n"
"and Leading Zeros are removed.\n"
"\n"
"This is used when there is no information\n"
"stored in the Excellon file."
msgstr ""
"This sets the type of Excellon zeros.\n"
"If LZ then Leading Zeros are kept and\n"
"Trailing Zeros are removed.\n"
"If TZ is checked then Trailing Zeros are kept\n"
"and Leading Zeros are removed.\n"
"\n"
"This is used when there is no information\n"
"stored in the Excellon file."

#: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:175
msgid ""
"This sets the default units of Excellon files.\n"
"If it is not detected in the parsed file the value here\n"
"will be used.Some Excellon files don't have an header\n"
"therefore this parameter will be used."
msgstr ""
"This sets the default units of Excellon files.\n"
"If it is not detected in the parsed file the value here\n"
"will be used.Some Excellon files don't have an header\n"
"therefore this parameter will be used."

#: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:185
msgid ""
"This sets the units of Excellon files.\n"
"Some Excellon files don't have an header\n"
"therefore this parameter will be used."
msgstr ""
"This sets the units of Excellon files.\n"
"Some Excellon files don't have an header\n"
"therefore this parameter will be used."

#: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:193
msgid "Update Export settings"
msgstr "Update Export settings"

#: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:210
#: appGUI/preferences/geometry/GeometryGenPrefGroupUI.py:91
#: appGUI/preferences/tools/ToolsPanelizePrefGroupUI.py:110
#: appTools/ToolPanelize.py:822
msgid "Path Optimization"
msgstr "Path Optimization"

#: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:213
#: appGUI/preferences/geometry/GeometryGenPrefGroupUI.py:94
msgid "Algorithm:"
msgstr "Algorithm:"

#: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:215
msgid ""
"This sets the optimization type for the Excellon drill path.\n"
"If <<MetaHeuristic>> is checked then Google OR-Tools algorithm with\n"
"MetaHeuristic Guided Local Path is used. Default search time is 3sec.\n"
"If <<Basic>> is checked then Google OR-Tools Basic algorithm is used.\n"
"If <<TSA>> is checked then Travelling Salesman algorithm is used for\n"
"drill path optimization.\n"
"\n"
"Some options are disabled when the application works in 32bit mode."
msgstr ""
"This sets the optimization type for the Excellon drill path.\n"
"If <<MetaHeuristic>> is checked then Google OR-Tools algorithm with\n"
"MetaHeuristic Guided Local Path is used. Default search time is 3sec.\n"
"If <<Basic>> is checked then Google OR-Tools Basic algorithm is used.\n"
"If <<TSA>> is checked then Travelling Salesman algorithm is used for\n"
"drill path optimization.\n"
"\n"
"Some options are disabled when the application works in 32bit mode."

#: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:225
#: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:310
#: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:314
#: appGUI/preferences/geometry/GeometryGenPrefGroupUI.py:109
#: appGUI/preferences/geometry/GeometryGenPrefGroupUI.py:171
#: appGUI/preferences/geometry/GeometryGenPrefGroupUI.py:175
msgid "MetaHeuristic"
msgstr "MetaHeuristic"

#: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:226
#: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:310
#: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:314
#: appGUI/preferences/general/GeneralAppPrefGroupUI.py:104
#: appGUI/preferences/geometry/GeometryGenPrefGroupUI.py:110
#: appGUI/preferences/geometry/GeometryGenPrefGroupUI.py:171
#: appGUI/preferences/geometry/GeometryGenPrefGroupUI.py:175
#: appObjects/FlatCAMExcellon.py:151 appObjects/FlatCAMGeometry.py:583
#: appObjects/FlatCAMGerber.py:172 appTools/ToolDrilling.py:306
#: appTools/ToolIsolation.py:247 appTools/ToolMilling.py:294
msgid "Basic"
msgstr "Basic"

#: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:227
#: appGUI/preferences/geometry/GeometryGenPrefGroupUI.py:111
msgid "TSA"
msgstr "TSA"

#: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:233
#: appGUI/preferences/geometry/GeometryGenPrefGroupUI.py:117
#: appGUI/preferences/geometry/GeometryOptPrefGroupUI.py:238
#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:209
msgid "Duration"
msgstr "Duration"

#: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:236
#: appGUI/preferences/geometry/GeometryGenPrefGroupUI.py:119
msgid ""
"When OR-Tools Metaheuristic (MH) is enabled there is a\n"
"maximum threshold for how much time is spent doing the\n"
"path optimization. This max duration is set here.\n"
"In seconds."
msgstr ""
"When OR-Tools Metaheuristic (MH) is enabled there is a\n"
"maximum threshold for how much time is spent doing the\n"
"path optimization. This max duration is set here.\n"
"In seconds."

#: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:255
#: appGUI/preferences/geometry/GeometryGenPrefGroupUI.py:138
msgid "Join Option"
msgstr "Join Option"

#: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:258
#: appGUI/preferences/geometry/GeometryGenPrefGroupUI.py:141
msgid "Fuse Tools"
msgstr "Fuse Tools"

#: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:260
#: appGUI/preferences/geometry/GeometryGenPrefGroupUI.py:143
msgid ""
"When checked, the tools will be merged\n"
"but only if they share some of their attributes."
msgstr ""
"When checked, the tools will be merged\n"
"but only if they share some of their attributes."

#: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:277
#: appGUI/preferences/geometry/GeometryGenPrefGroupUI.py:160
#: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:171
msgid "Set the line color for plotted objects."
msgstr "Set the line color for plotted objects."

#: appGUI/preferences/excellon/ExcellonOptPrefGroupUI.py:29
msgid "Excellon Options"
msgstr "Excellon Options"

#: appGUI/preferences/excellon/ExcellonOptPrefGroupUI.py:33
#: appGUI/preferences/geometry/GeometryOptPrefGroupUI.py:35
msgid "Create CNC Job"
msgstr "Create CNC Job"

#: appGUI/preferences/excellon/ExcellonOptPrefGroupUI.py:35
msgid ""
"Parameters used to create a CNC Job object\n"
"for this drill object."
msgstr ""
"Parameters used to create a CNC Job object\n"
"for this drill object."

#: appGUI/preferences/excellon/ExcellonOptPrefGroupUI.py:48
#: appTools/ToolMilling.py:1740
msgid ""
"Operation type:\n"
"- Drilling -> will drill the drills/slots associated with this tool\n"
"- Milling -> will mill the drills/slots"
msgstr ""
"Operation type:\n"
"- Drilling -> will drill the drills/slots associated with this tool\n"
"- Milling -> will mill the drills/slots"

#: appGUI/preferences/excellon/ExcellonOptPrefGroupUI.py:64
#: appTools/ToolMilling.py:1762
msgid ""
"Milling type:\n"
"- Drills -> will mill the drills associated with this tool\n"
"- Slots -> will mill the slots associated with this tool\n"
"- Both -> will mill both drills and mills or whatever is available"
msgstr ""
"Milling type:\n"
"- Drills -> will mill the drills associated with this tool\n"
"- Slots -> will mill the slots associated with this tool\n"
"- Both -> will mill both drills and mills or whatever is available"

#: appGUI/preferences/excellon/ExcellonOptPrefGroupUI.py:73
#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:293
#: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:199
#: appTools/ToolCopperThieving.py:1671 appTools/ToolFilm.py:1109
#: appTools/ToolMilling.py:1771
msgid "Both"
msgstr "Both"

#: appGUI/preferences/excellon/ExcellonOptPrefGroupUI.py:82
#: appTools/ToolMilling.py:1781
msgid "The diameter of the tool who will do the milling"
msgstr "The diameter of the tool who will do the milling"

#: appGUI/preferences/excellon/ExcellonOptPrefGroupUI.py:93
msgid "Mill Holes"
msgstr "Mill Holes"

#: appGUI/preferences/excellon/ExcellonOptPrefGroupUI.py:95
msgid "Create Geometry for milling holes."
msgstr "Create Geometry for milling holes."

#: appGUI/preferences/excellon/ExcellonOptPrefGroupUI.py:99
msgid "Drill Tool dia"
msgstr "Drill Tool dia"

#: appGUI/preferences/excellon/ExcellonOptPrefGroupUI.py:110
msgid "Slot Tool dia"
msgstr "Slot Tool dia"

#: appGUI/preferences/excellon/ExcellonOptPrefGroupUI.py:112
msgid ""
"Diameter of the cutting tool\n"
"when milling slots."
msgstr ""
"Diameter of the cutting tool\n"
"when milling slots."

#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:28
#: appGUI/preferences/general/GeneralAppSettingsGroupUI.py:74
msgid "App Settings"
msgstr "App Settings"

#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:49
msgid "Grid Settings"
msgstr "Grid Settings"

#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:53 app_Main.py:7573
msgid "X value"
msgstr "X value"

#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:55
msgid "This is the Grid snap value on X axis."
msgstr "This is the Grid snap value on X axis."

#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:65 app_Main.py:7576
msgid "Y value"
msgstr "Y value"

#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:67
msgid "This is the Grid snap value on Y axis."
msgstr "This is the Grid snap value on Y axis."

#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:77
msgid "Snap Max"
msgstr "Snap Max"

#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:92
msgid "Workspace Settings"
msgstr "Workspace Settings"

#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:95
msgid "Active"
msgstr "Active"

#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:105
msgid ""
"Select the type of rectangle to be used on canvas,\n"
"as valid workspace."
msgstr ""
"Select the type of rectangle to be used on canvas,\n"
"as valid workspace."

#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:171
msgid "Orientation"
msgstr "Orientation"

#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:172
#: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:228
#: appTools/ToolFilm.py:1274
msgid ""
"Can be:\n"
"- Portrait\n"
"- Landscape"
msgstr ""
"Can be:\n"
"- Portrait\n"
"- Landscape"

#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:176
#: appGUI/preferences/general/GeneralAppSettingsGroupUI.py:168
#: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:232
#: appTools/ToolFilm.py:1278 app_Main.py:7593
msgid "Portrait"
msgstr "Portrait"

#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:177
#: appGUI/preferences/general/GeneralAppSettingsGroupUI.py:169
#: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:233
#: appTools/ToolFilm.py:1279 app_Main.py:7595
msgid "Landscape"
msgstr "Landscape"

#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:193
msgid "Notebook"
msgstr "Notebook"

#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:195
msgid ""
"This sets the font size for the elements found in the Notebook.\n"
"The notebook is the collapsible area in the left side of the GUI,\n"
"and include the Project, Selected and Tool tabs."
msgstr ""
"This sets the font size for the elements found in the Notebook.\n"
"The notebook is the collapsible area in the left side of the GUI,\n"
"and include the Project, Selected and Tool tabs."

#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:214
#: appTools/ToolDblSided.py:669 appTools/ToolDblSided.py:843 app_Main.py:7581
msgid "Axis"
msgstr "Axis"

#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:216
msgid "This sets the font size for canvas axis."
msgstr "This sets the font size for canvas axis."

#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:233
msgid "Textbox"
msgstr "Textbox"

#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:235
msgid ""
"This sets the font size for the Textbox GUI\n"
"elements that are used in the application."
msgstr ""
"This sets the font size for the Textbox GUI\n"
"elements that are used in the application."

#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:253 app_Main.py:7598
msgid "HUD"
msgstr "HUD"

#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:255
msgid "This sets the font size for the Heads Up Display."
msgstr "This sets the font size for the Heads Up Display."

#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:280
msgid "Mouse Settings"
msgstr "Mouse Settings"

#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:284
msgid "Cursor Shape"
msgstr "Cursor Shape"

#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:286
msgid ""
"Choose a mouse cursor shape.\n"
"- Small -> with a customizable size.\n"
"- Big -> Infinite lines"
msgstr ""
"Choose a mouse cursor shape.\n"
"- Small -> with a customizable size.\n"
"- Big -> Infinite lines"

#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:292
#: appGUI/preferences/general/GeneralAppSettingsGroupUI.py:207
msgid "Small"
msgstr "Small"

#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:293
#: appGUI/preferences/general/GeneralAppSettingsGroupUI.py:208
msgid "Big"
msgstr "Big"

#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:300
msgid "Cursor Size"
msgstr "Cursor Size"

#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:302
msgid "Set the size of the mouse cursor, in pixels."
msgstr "Set the size of the mouse cursor, in pixels."

#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:313
msgid "Cursor Width"
msgstr "Cursor Width"

#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:315
msgid "Set the line width of the mouse cursor, in pixels."
msgstr "Set the line width of the mouse cursor, in pixels."

#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:326
#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:333
msgid "Cursor Color"
msgstr "Cursor Color"

#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:328
msgid "Check this box to color mouse cursor."
msgstr "Check this box to color mouse cursor."

#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:335
msgid "Set the color of the mouse cursor."
msgstr "Set the color of the mouse cursor."

#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:350
msgid "Pan Button"
msgstr "Pan Button"

#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:352
msgid ""
"Select the mouse button to use for panning:\n"
"- MMB --> Middle Mouse Button\n"
"- RMB --> Right Mouse Button"
msgstr ""
"Select the mouse button to use for panning:\n"
"- MMB --> Middle Mouse Button\n"
"- RMB --> Right Mouse Button"

#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:356
#: appGUI/preferences/general/GeneralAppSettingsGroupUI.py:240
msgid "MMB"
msgstr "MMB"

#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:357
#: appGUI/preferences/general/GeneralAppSettingsGroupUI.py:241
msgid "RMB"
msgstr "RMB"

#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:363
msgid "Multiple Selection"
msgstr "Multiple Selection"

#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:365
msgid "Select the key used for multiple selection."
msgstr "Select the key used for multiple selection."

#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:367
#: appGUI/preferences/general/GeneralAppSettingsGroupUI.py:247
msgid "CTRL"
msgstr "CTRL"

#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:368
#: appGUI/preferences/general/GeneralAppSettingsGroupUI.py:248
msgid "SHIFT"
msgstr "SHIFT"

#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:379
msgid "Delete object confirmation"
msgstr "Delete object confirmation"

#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:381
msgid ""
"When checked the application will ask for user confirmation\n"
"whenever the Delete object(s) event is triggered, either by\n"
"menu shortcut or key shortcut."
msgstr ""
"When checked the application will ask for user confirmation\n"
"whenever the Delete object(s) event is triggered, either by\n"
"menu shortcut or key shortcut."

#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:387
msgid "Allow Edit"
msgstr "Allow Edit"

#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:389
msgid ""
"When checked, the user can edit the object names in the Project Tab\n"
"by clicking on the object name. Active after restart."
msgstr ""
"When checked, the user can edit the object names in the Project Tab\n"
"by clicking on the object name. Active after restart."

#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:395
msgid "\"Open\" behavior"
msgstr "\"Open\" behavior"

#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:397
msgid ""
"When checked the path for the last saved file is used when saving files,\n"
"and the path for the last opened file is used when opening files.\n"
"\n"
"When unchecked the path for opening files is the one used last: either the\n"
"path for saving files or the path for opening files."
msgstr ""
"When checked the path for the last saved file is used when saving files,\n"
"and the path for the last opened file is used when opening files.\n"
"\n"
"When unchecked the path for opening files is the one used last: either the\n"
"path for saving files or the path for opening files."

#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:406
msgid "Enable ToolTips"
msgstr "Enable ToolTips"

#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:408
msgid ""
"Check this box if you want to have toolTips displayed\n"
"when hovering with mouse over items throughout the App."
msgstr ""
"Check this box if you want to have toolTips displayed\n"
"when hovering with mouse over items throughout the App."

#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:415
msgid "Allow Machinist Unsafe Settings"
msgstr "Allow Machinist Unsafe Settings"

#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:417
msgid ""
"If checked, some of the application settings will be allowed\n"
"to have values that are usually unsafe to use.\n"
"Like Z travel negative values or Z Cut positive values.\n"
"It will applied at the next application start.\n"
"<<WARNING>>: Don't change this unless you know what you are doing !!!"
msgstr ""
"If checked, some of the application settings will be allowed\n"
"to have values that are usually unsafe to use.\n"
"Like Z travel negative values or Z Cut positive values.\n"
"It will applied at the next application start.\n"
"<<WARNING>>: Don't change this unless you know what you are doing !!!"

#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:429
msgid "Bookmarks limit"
msgstr "Bookmarks limit"

#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:431
msgid ""
"The maximum number of bookmarks that may be installed in the menu.\n"
"The number of bookmarks in the bookmark manager may be greater\n"
"but the menu will hold only so much."
msgstr ""
"The maximum number of bookmarks that may be installed in the menu.\n"
"The number of bookmarks in the bookmark manager may be greater\n"
"but the menu will hold only so much."

#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:440
msgid "Activity Icon"
msgstr "Activity Icon"

#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:442
msgid "Select the GIF that show activity when FlatCAM is active."
msgstr "Select the GIF that show activity when FlatCAM is active."

#: appGUI/preferences/general/GeneralAppPrefGroupUI.py:29
msgid "App Preferences"
msgstr "App Preferences"

#: appGUI/preferences/general/GeneralAppPrefGroupUI.py:40
msgid ""
"The default value for FlatCAM units.\n"
"Whatever is selected here is set every time\n"
"FlatCAM is started."
msgstr ""
"The default value for FlatCAM units.\n"
"Whatever is selected here is set every time\n"
"FlatCAM is started."

#: appGUI/preferences/general/GeneralAppPrefGroupUI.py:44
msgid "IN"
msgstr "IN"

#: appGUI/preferences/general/GeneralAppPrefGroupUI.py:50
msgid "Precision MM"
msgstr "Precision MM"

#: appGUI/preferences/general/GeneralAppPrefGroupUI.py:52
msgid ""
"The number of decimals used throughout the application\n"
"when the set units are in METRIC system.\n"
"Any change here require an application restart."
msgstr ""
"The number of decimals used throughout the application\n"
"when the set units are in METRIC system.\n"
"Any change here require an application restart."

#: appGUI/preferences/general/GeneralAppPrefGroupUI.py:64
msgid "Precision INCH"
msgstr "Precision INCH"

#: appGUI/preferences/general/GeneralAppPrefGroupUI.py:66
msgid ""
"The number of decimals used throughout the application\n"
"when the set units are in INCH system.\n"
"Any change here require an application restart."
msgstr ""
"The number of decimals used throughout the application\n"
"when the set units are in INCH system.\n"
"Any change here require an application restart."

#: appGUI/preferences/general/GeneralAppPrefGroupUI.py:78
msgid "Graphic Engine"
msgstr "Graphic Engine"

#: appGUI/preferences/general/GeneralAppPrefGroupUI.py:79
msgid ""
"Choose what graphic engine to use in FlatCAM.\n"
"Legacy(2D) -> reduced functionality, slow performance but enhanced "
"compatibility.\n"
"OpenGL(3D) -> full functionality, high performance\n"
"Some graphic cards are too old and do not work in OpenGL(3D) mode, like:\n"
"Intel HD3000 or older. In this case the plot area will be black therefore\n"
"use the Legacy(2D) mode."
msgstr ""
"Choose what graphic engine to use in FlatCAM.\n"
"Legacy(2D) -> reduced functionality, slow performance but enhanced "
"compatibility.\n"
"OpenGL(3D) -> full functionality, high performance\n"
"Some graphic cards are too old and do not work in OpenGL(3D) mode, like:\n"
"Intel HD3000 or older. In this case the plot area will be black therefore\n"
"use the Legacy(2D) mode."

#: appGUI/preferences/general/GeneralAppPrefGroupUI.py:85
msgid "Legacy(2D)"
msgstr "Legacy(2D)"

#: appGUI/preferences/general/GeneralAppPrefGroupUI.py:86
msgid "OpenGL(3D)"
msgstr "OpenGL(3D)"

#: appGUI/preferences/general/GeneralAppPrefGroupUI.py:98
msgid "APPLICATION LEVEL"
msgstr "APPLICATION LEVEL"

#: appGUI/preferences/general/GeneralAppPrefGroupUI.py:99
msgid ""
"Choose the default level of usage for FlatCAM.\n"
"BASIC level -> reduced functionality, best for beginner's.\n"
"ADVANCED level -> full functionality.\n"
"\n"
"The choice here will influence the parameters in\n"
"the Selected Tab for all kinds of FlatCAM objects."
msgstr ""
"Choose the default level of usage for FlatCAM.\n"
"BASIC level -> reduced functionality, best for beginner's.\n"
"ADVANCED level -> full functionality.\n"
"\n"
"The choice here will influence the parameters in\n"
"the Selected Tab for all kinds of FlatCAM objects."

#: appGUI/preferences/general/GeneralAppPrefGroupUI.py:105
#: appObjects/FlatCAMExcellon.py:160 appObjects/FlatCAMGeometry.py:603
#: appObjects/FlatCAMGerber.py:180 appTools/ToolDrilling.py:310
#: appTools/ToolIsolation.py:274 appTools/ToolMilling.py:305
msgid "Advanced"
msgstr "Advanced"

#: appGUI/preferences/general/GeneralAppPrefGroupUI.py:111
msgid "Portable app"
msgstr "Portable app"

#: appGUI/preferences/general/GeneralAppPrefGroupUI.py:112
msgid ""
"Choose if the application should run as portable.\n"
"\n"
"If Checked the application will run portable,\n"
"which means that the preferences files will be saved\n"
"in the application folder, in the lib\\config subfolder."
msgstr ""
"Choose if the application should run as portable.\n"
"\n"
"If Checked the application will run portable,\n"
"which means that the preferences files will be saved\n"
"in the application folder, in the lib\\config subfolder."

#: appGUI/preferences/general/GeneralAppPrefGroupUI.py:125
msgid "Languages"
msgstr "Languages"

#: appGUI/preferences/general/GeneralAppPrefGroupUI.py:126
msgid "Set the language used throughout FlatCAM."
msgstr "Set the language used throughout FlatCAM."

#: appGUI/preferences/general/GeneralAppPrefGroupUI.py:132
msgid "Apply Language"
msgstr "Apply Language"

#: appGUI/preferences/general/GeneralAppPrefGroupUI.py:133
msgid ""
"Set the language used throughout FlatCAM.\n"
"The app will restart after click."
msgstr ""
"Set the language used throughout FlatCAM.\n"
"The app will restart after click."

#: appGUI/preferences/general/GeneralAppPrefGroupUI.py:147
msgid "Startup Settings"
msgstr "Startup Settings"

#: appGUI/preferences/general/GeneralAppPrefGroupUI.py:151
msgid "Splash Screen"
msgstr "Splash Screen"

#: appGUI/preferences/general/GeneralAppPrefGroupUI.py:153
msgid "Enable display of the splash screen at application startup."
msgstr "Enable display of the splash screen at application startup."

#: appGUI/preferences/general/GeneralAppPrefGroupUI.py:165
msgid "Sys Tray Icon"
msgstr "Sys Tray Icon"

#: appGUI/preferences/general/GeneralAppPrefGroupUI.py:167
msgid "Enable display of FlatCAM icon in Sys Tray."
msgstr "Enable display of FlatCAM icon in Sys Tray."

#: appGUI/preferences/general/GeneralAppPrefGroupUI.py:172
msgid "Show Shell"
msgstr "Show Shell"

#: appGUI/preferences/general/GeneralAppPrefGroupUI.py:174
msgid ""
"Check this box if you want the shell to\n"
"start automatically at startup."
msgstr ""
"Check this box if you want the shell to\n"
"start automatically at startup."

#: appGUI/preferences/general/GeneralAppPrefGroupUI.py:181
msgid "Show Project"
msgstr "Show Project"

#: appGUI/preferences/general/GeneralAppPrefGroupUI.py:183
msgid ""
"Check this box if you want the project/selected/tool tab area to\n"
"to be shown automatically at startup."
msgstr ""
"Check this box if you want the project/selected/tool tab area to\n"
"to be shown automatically at startup."

#: appGUI/preferences/general/GeneralAppPrefGroupUI.py:189
msgid "Version Check"
msgstr "Version Check"

#: appGUI/preferences/general/GeneralAppPrefGroupUI.py:191
msgid ""
"Check this box if you want to check\n"
"for a new version automatically at startup."
msgstr ""
"Check this box if you want to check\n"
"for a new version automatically at startup."

#: appGUI/preferences/general/GeneralAppPrefGroupUI.py:198
msgid "Send Statistics"
msgstr "Send Statistics"

#: appGUI/preferences/general/GeneralAppPrefGroupUI.py:200
msgid ""
"Check this box if you agree to send anonymous\n"
"stats automatically at startup, to help improve FlatCAM."
msgstr ""
"Check this box if you agree to send anonymous\n"
"stats automatically at startup, to help improve FlatCAM."

#: appGUI/preferences/general/GeneralAppPrefGroupUI.py:214
msgid "Workers number"
msgstr "Workers number"

#: appGUI/preferences/general/GeneralAppPrefGroupUI.py:216
msgid ""
"The number of Qthreads made available to the App.\n"
"A bigger number may finish the jobs more quickly but\n"
"depending on your computer speed, may make the App\n"
"unresponsive. Can have a value between 2 and 16.\n"
"Default value is 2.\n"
"After change, it will be applied at next App start."
msgstr ""
"The number of Qthreads made available to the App.\n"
"A bigger number may finish the jobs more quickly but\n"
"depending on your computer speed, may make the App\n"
"unresponsive. Can have a value between 2 and 16.\n"
"Default value is 2.\n"
"After change, it will be applied at next App start."

#: appGUI/preferences/general/GeneralAppPrefGroupUI.py:230
msgid "Geo Tolerance"
msgstr "Geo Tolerance"

#: appGUI/preferences/general/GeneralAppPrefGroupUI.py:232
msgid ""
"This value can counter the effect of the Circle Steps\n"
"parameter. Default value is 0.005.\n"
"A lower value will increase the detail both in image\n"
"and in Gcode for the circles, with a higher cost in\n"
"performance. Higher value will provide more\n"
"performance at the expense of level of detail."
msgstr ""
"This value can counter the effect of the Circle Steps\n"
"parameter. Default value is 0.005.\n"
"A lower value will increase the detail both in image\n"
"and in Gcode for the circles, with a higher cost in\n"
"performance. Higher value will provide more\n"
"performance at the expense of level of detail."

#: appGUI/preferences/general/GeneralAppPrefGroupUI.py:252
msgid "Save Settings"
msgstr "Save Settings"

#: appGUI/preferences/general/GeneralAppPrefGroupUI.py:256
msgid "Save Compressed Project"
msgstr "Save Compressed Project"

#: appGUI/preferences/general/GeneralAppPrefGroupUI.py:258
msgid ""
"Whether to save a compressed or uncompressed project.\n"
"When checked it will save a compressed FlatCAM project."
msgstr ""
"Whether to save a compressed or uncompressed project.\n"
"When checked it will save a compressed FlatCAM project."

#: appGUI/preferences/general/GeneralAppPrefGroupUI.py:267
msgid "Compression"
msgstr "Compression"

#: appGUI/preferences/general/GeneralAppPrefGroupUI.py:269
msgid ""
"The level of compression used when saving\n"
"a FlatCAM project. Higher value means better compression\n"
"but require more RAM usage and more processing time."
msgstr ""
"The level of compression used when saving\n"
"a FlatCAM project. Higher value means better compression\n"
"but require more RAM usage and more processing time."

#: appGUI/preferences/general/GeneralAppPrefGroupUI.py:280
msgid "Enable Auto Save"
msgstr "Enable Auto Save"

#: appGUI/preferences/general/GeneralAppPrefGroupUI.py:282
msgid ""
"Check to enable the autosave feature.\n"
"When enabled, the application will try to save a project\n"
"at the set interval."
msgstr ""
"Check to enable the autosave feature.\n"
"When enabled, the application will try to save a project\n"
"at the set interval."

#: appGUI/preferences/general/GeneralAppPrefGroupUI.py:292
msgid "Interval"
msgstr "Interval"

#: appGUI/preferences/general/GeneralAppPrefGroupUI.py:294
msgid ""
"Time interval for autosaving. In milliseconds.\n"
"The application will try to save periodically but only\n"
"if the project was saved manually at least once.\n"
"While active, some operations may block this feature."
msgstr ""
"Time interval for autosaving. In milliseconds.\n"
"The application will try to save periodically but only\n"
"if the project was saved manually at least once.\n"
"While active, some operations may block this feature."

#: appGUI/preferences/general/GeneralAppPrefGroupUI.py:310
msgid "Text to PDF parameters"
msgstr "Text to PDF parameters"

#: appGUI/preferences/general/GeneralAppPrefGroupUI.py:312
msgid "Used when saving text in Code Editor or in FlatCAM Document objects."
msgstr "Used when saving text in Code Editor or in FlatCAM Document objects."

#: appGUI/preferences/general/GeneralAppPrefGroupUI.py:321
msgid "Top Margin"
msgstr "Top Margin"

#: appGUI/preferences/general/GeneralAppPrefGroupUI.py:323
msgid "Distance between text body and the top of the PDF file."
msgstr "Distance between text body and the top of the PDF file."

#: appGUI/preferences/general/GeneralAppPrefGroupUI.py:334
msgid "Bottom Margin"
msgstr "Bottom Margin"

#: appGUI/preferences/general/GeneralAppPrefGroupUI.py:336
msgid "Distance between text body and the bottom of the PDF file."
msgstr "Distance between text body and the bottom of the PDF file."

#: appGUI/preferences/general/GeneralAppPrefGroupUI.py:347
msgid "Left Margin"
msgstr "Left Margin"

#: appGUI/preferences/general/GeneralAppPrefGroupUI.py:349
msgid "Distance between text body and the left of the PDF file."
msgstr "Distance between text body and the left of the PDF file."

#: appGUI/preferences/general/GeneralAppPrefGroupUI.py:360
msgid "Right Margin"
msgstr "Right Margin"

#: appGUI/preferences/general/GeneralAppPrefGroupUI.py:362
msgid "Distance between text body and the right of the PDF file."
msgstr "Distance between text body and the right of the PDF file."

#: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:26
msgid "GUI Preferences"
msgstr "GUI Preferences"

#: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:36
msgid "Theme"
msgstr "Theme"

#: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:38
msgid ""
"Select a theme for the application.\n"
"It will theme the plot area."
msgstr ""
"Select a theme for the application.\n"
"It will theme the plot area."

#: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:43
msgid "Light"
msgstr "Light"

#: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:44
msgid "Dark"
msgstr "Dark"

#: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:51
msgid "Use Gray Icons"
msgstr "Use Gray Icons"

#: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:53
msgid ""
"Check this box to use a set of icons with\n"
"a lighter (gray) color. To be used when a\n"
"full dark theme is applied."
msgstr ""
"Check this box to use a set of icons with\n"
"a lighter (gray) color. To be used when a\n"
"full dark theme is applied."

#: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:73
msgid "Layout"
msgstr "Layout"

#: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:75
msgid ""
"Select a layout for the application.\n"
"It is applied immediately."
msgstr ""
"Select a layout for the application.\n"
"It is applied immediately."

#: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:95
msgid "Style"
msgstr "Style"

#: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:97
msgid ""
"Select a style for the application.\n"
"It will be applied at the next app start."
msgstr ""
"Select a style for the application.\n"
"It will be applied at the next app start."

#: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:111
msgid "HDPI Support"
msgstr "HDPI Support"

#: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:113
msgid ""
"Enable High DPI support for the application.\n"
"It will be applied at the next app start."
msgstr ""
"Enable High DPI support for the application.\n"
"It will be applied at the next app start."

#: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:127
msgid "Hover Shape"
msgstr "Hover Shape"

#: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:129
msgid ""
"Enable display of a hover shape for the application objects.\n"
"It is displayed whenever the mouse cursor is hovering\n"
"over any kind of not-selected object."
msgstr ""
"Enable display of a hover shape for the application objects.\n"
"It is displayed whenever the mouse cursor is hovering\n"
"over any kind of not-selected object."

#: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:136
msgid "Selection Shape"
msgstr "Selection Shape"

#: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:138
msgid ""
"Enable the display of a selection shape for the application objects.\n"
"It is displayed whenever the mouse selects an object\n"
"either by clicking or dragging mouse from left to right or\n"
"right to left."
msgstr ""
"Enable the display of a selection shape for the application objects.\n"
"It is displayed whenever the mouse selects an object\n"
"either by clicking or dragging mouse from left to right or\n"
"right to left."

#: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:151
msgid "Left-Right Selection Color"
msgstr "Left-Right Selection Color"

#: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:156
msgid "Set the line color for the 'left to right' selection box."
msgstr "Set the line color for the 'left to right' selection box."

#: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:165
msgid ""
"Set the fill color for the selection box\n"
"in case that the selection is done from left to right.\n"
"First 6 digits are the color and the last 2\n"
"digits are for alpha (transparency) level."
msgstr ""
"Set the fill color for the selection box\n"
"in case that the selection is done from left to right.\n"
"First 6 digits are the color and the last 2\n"
"digits are for alpha (transparency) level."

#: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:178
msgid "Set the fill transparency for the 'left to right' selection box."
msgstr "Set the fill transparency for the 'left to right' selection box."

#: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:191
msgid "Right-Left Selection Color"
msgstr "Right-Left Selection Color"

#: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:197
msgid "Set the line color for the 'right to left' selection box."
msgstr "Set the line color for the 'right to left' selection box."

#: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:207
msgid ""
"Set the fill color for the selection box\n"
"in case that the selection is done from right to left.\n"
"First 6 digits are the color and the last 2\n"
"digits are for alpha (transparency) level."
msgstr ""
"Set the fill color for the selection box\n"
"in case that the selection is done from right to left.\n"
"First 6 digits are the color and the last 2\n"
"digits are for alpha (transparency) level."

#: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:220
msgid "Set the fill transparency for selection 'right to left' box."
msgstr "Set the fill transparency for selection 'right to left' box."

#: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:236
msgid "Editor Color"
msgstr "Editor Color"

#: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:240
msgid "Drawing"
msgstr "Drawing"

#: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:242
msgid "Set the color for the shape."
msgstr "Set the color for the shape."

#: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:252
msgid "Set the color of the shape when selected."
msgstr "Set the color of the shape when selected."

#: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:268
msgid "Project Items Color"
msgstr "Project Items Color"

#: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:272
msgid "Enabled"
msgstr "Enabled"

#: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:274
msgid "Set the color of the items in Project Tab Tree."
msgstr "Set the color of the items in Project Tab Tree."

#: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:281
msgid "Disabled"
msgstr "Disabled"

#: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:283
msgid ""
"Set the color of the items in Project Tab Tree,\n"
"for the case when the items are disabled."
msgstr ""
"Set the color of the items in Project Tab Tree,\n"
"for the case when the items are disabled."

#: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:292
msgid "Project AutoHide"
msgstr "Project AutoHide"

#: appGUI/preferences/general/GeneralGUIPrefGroupUI.py:294
msgid ""
"Check this box if you want the project/selected/tool tab area to\n"
"hide automatically when there are no objects loaded and\n"
"to show whenever a new object is created."
msgstr ""
"Check this box if you want the project/selected/tool tab area to\n"
"hide automatically when there are no objects loaded and\n"
"to show whenever a new object is created."

#: appGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:28
msgid "Geometry Adv. Options"
msgstr "Geometry Adv. Options"

#: appGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:36
msgid ""
"A list of Geometry advanced parameters.\n"
"Those parameters are available only for\n"
"Advanced App. Level."
msgstr ""
"A list of Geometry advanced parameters.\n"
"Those parameters are available only for\n"
"Advanced App. Level."

#: appGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:46
#: appGUI/preferences/tools/Tools2CalPrefGroupUI.py:112
#: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:134
#: appTools/ToolCalibration.py:820 appTools/ToolSolderPaste.py:1313
msgid "Toolchange X-Y"
msgstr "Toolchange X-Y"

#: appGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:48
#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:299
msgid "Toolchange X,Y position."
msgstr "Toolchange X,Y position."

#: appGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:56
#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:307
#: appTools/ToolDrilling.py:2415 appTools/ToolMilling.py:2087
msgid "Start Z"
msgstr "Start Z"

#: appGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:58
msgid ""
"Height of the tool just after starting the work.\n"
"Delete the value if you don't need this feature."
msgstr ""
"Height of the tool just after starting the work.\n"
"Delete the value if you don't need this feature."

#: appGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:137
#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:359
msgid "Spindle direction"
msgstr "Spindle direction"

#: appGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:139
#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:361
msgid ""
"This sets the direction that the spindle is rotating.\n"
"It can be either:\n"
"- CW = clockwise or\n"
"- CCW = counter clockwise"
msgstr ""
"This sets the direction that the spindle is rotating.\n"
"It can be either:\n"
"- CW = clockwise or\n"
"- CCW = counter clockwise"

#: appGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:151
#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:372
msgid "Fast Plunge"
msgstr "Fast Plunge"

#: appGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:153
#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:374
msgid ""
"By checking this, the vertical move from\n"
"Z_Toolchange to Z_move is done with G0,\n"
"meaning the fastest speed available.\n"
"WARNING: the move is done at Toolchange X,Y coords."
msgstr ""
"By checking this, the vertical move from\n"
"Z_Toolchange to Z_move is done with G0,\n"
"meaning the fastest speed available.\n"
"WARNING: the move is done at Toolchange X,Y coords."

#: appGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:161
msgid "Segment X size"
msgstr "Segment X size"

#: appGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:163
msgid ""
"The size of the trace segment on the X axis.\n"
"Useful for auto-leveling.\n"
"A value of 0 means no segmentation on the X axis."
msgstr ""
"The size of the trace segment on the X axis.\n"
"Useful for auto-leveling.\n"
"A value of 0 means no segmentation on the X axis."

#: appGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:177
msgid "Segment Y size"
msgstr "Segment Y size"

#: appGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:179
msgid ""
"The size of the trace segment on the Y axis.\n"
"Useful for auto-leveling.\n"
"A value of 0 means no segmentation on the Y axis."
msgstr ""
"The size of the trace segment on the Y axis.\n"
"Useful for auto-leveling.\n"
"A value of 0 means no segmentation on the Y axis."

#: appGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:200
#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:401
msgid "Area Exclusion"
msgstr "Area Exclusion"

#: appGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:202
#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:403
msgid "Area exclusion parameters."
msgstr "Area exclusion parameters."

#: appGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:207
#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:408
msgid "Exclusion areas"
msgstr "Exclusion areas"

#: appGUI/preferences/geometry/GeometryEditorPrefGroupUI.py:43
#: appGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:174
msgid ""
"Set the number of selected geometry\n"
"items above which the utility geometry\n"
"becomes just a selection rectangle.\n"
"Increases the performance when moving a\n"
"large number of geometric elements."
msgstr ""
"Set the number of selected geometry\n"
"items above which the utility geometry\n"
"becomes just a selection rectangle.\n"
"Increases the performance when moving a\n"
"large number of geometric elements."

#: appGUI/preferences/geometry/GeometryEditorPrefGroupUI.py:58
msgid ""
"Milling type:\n"
"- climb / best for precision milling and to reduce tool usage\n"
"- conventional / useful when there is no backlash compensation"
msgstr ""
"Milling type:\n"
"- climb / best for precision milling and to reduce tool usage\n"
"- conventional / useful when there is no backlash compensation"

#: appGUI/preferences/geometry/GeometryGenPrefGroupUI.py:29
msgid "Geometry General"
msgstr "Geometry General"

#: appGUI/preferences/geometry/GeometryGenPrefGroupUI.py:61
msgid ""
"The number of circle steps for <b>Geometry</b> \n"
"circle and arc shapes linear approximation."
msgstr ""
"The number of circle steps for <b>Geometry</b> \n"
"circle and arc shapes linear approximation."

#: appGUI/preferences/geometry/GeometryGenPrefGroupUI.py:75
#: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:41
#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:41
#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:46
#: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:42
msgid "Tools Dia"
msgstr "Tools Dia"

#: appGUI/preferences/geometry/GeometryGenPrefGroupUI.py:77
#: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:108
#: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:43
#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:43
#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:48
#: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:44
msgid ""
"Diameters of the tools, separated by comma.\n"
"The value of the diameter has to use the dot decimals separator.\n"
"Valid values: 0.3, 1.0"
msgstr ""
"Diameters of the tools, separated by comma.\n"
"The value of the diameter has to use the dot decimals separator.\n"
"Valid values: 0.3, 1.0"

#: appGUI/preferences/geometry/GeometryGenPrefGroupUI.py:96
msgid ""
"This sets the path optimization algorithm.\n"
"- Rtre -> Rtree algorithm\n"
"- MetaHeuristic -> Google OR-Tools algorithm with\n"
"MetaHeuristic Guided Local Path is used. Default search time is 3sec.\n"
"- Basic -> Using Google OR-Tools Basic algorithm\n"
"- TSA -> Using Travelling Salesman algorithm\n"
"\n"
"Some options are disabled when the application works in 32bit mode."
msgstr ""
"This sets the path optimization algorithm.\n"
"- Rtre -> Rtree algorithm\n"
"- MetaHeuristic -> Google OR-Tools algorithm with\n"
"MetaHeuristic Guided Local Path is used. Default search time is 3sec.\n"
"- Basic -> Using Google OR-Tools Basic algorithm\n"
"- TSA -> Using Travelling Salesman algorithm\n"
"\n"
"Some options are disabled when the application works in 32bit mode."

#: appGUI/preferences/geometry/GeometryGenPrefGroupUI.py:108
msgid "Rtree"
msgstr "Rtree"

#: appGUI/preferences/geometry/GeometryOptPrefGroupUI.py:29
msgid "Geometry Options"
msgstr "Geometry Options"

#: appGUI/preferences/geometry/GeometryOptPrefGroupUI.py:37
msgid ""
"Create a CNC Job object\n"
"tracing the contours of this\n"
"Geometry object."
msgstr ""
"Create a CNC Job object\n"
"tracing the contours of this\n"
"Geometry object."

#: appGUI/preferences/geometry/GeometryOptPrefGroupUI.py:81
msgid "Depth/Pass"
msgstr "Depth/Pass"

#: appGUI/preferences/geometry/GeometryOptPrefGroupUI.py:83
msgid ""
"The depth to cut on each pass,\n"
"when multidepth is enabled.\n"
"It has positive value although\n"
"it is a fraction from the depth\n"
"which has negative value."
msgstr ""
"The depth to cut on each pass,\n"
"when multidepth is enabled.\n"
"It has positive value although\n"
"it is a fraction from the depth\n"
"which has negative value."

#: appGUI/preferences/geometry/GeometryOptPrefGroupUI.py:122
#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:116
#: appTools/ToolDrilling.py:2385
msgid "Tool change"
msgstr "Tool change"

#: appGUI/preferences/geometry/GeometryOptPrefGroupUI.py:132
#: appGUI/preferences/tools/Tools2CalPrefGroupUI.py:98
#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:124
#: appTools/ToolCalibration.py:806
msgid "Toolchange Z"
msgstr "Toolchange Z"

#: appGUI/preferences/geometry/GeometryOptPrefGroupUI.py:233
#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:200
msgid "Enable Dwell"
msgstr "Enable Dwell"

#: appGUI/preferences/gerber/GerberAdvOptPrefGroupUI.py:27
msgid "Gerber Adv. Options"
msgstr "Gerber Adv. Options"

#: appGUI/preferences/gerber/GerberAdvOptPrefGroupUI.py:33
msgid ""
"A list of Gerber advanced parameters.\n"
"Those parameters are available only for\n"
"Advanced App. Level."
msgstr ""
"A list of Gerber advanced parameters.\n"
"Those parameters are available only for\n"
"Advanced App. Level."

#: appGUI/preferences/gerber/GerberAdvOptPrefGroupUI.py:43
msgid "\"Follow\""
msgstr "\"Follow\""

#: appGUI/preferences/gerber/GerberAdvOptPrefGroupUI.py:64
#: appObjects/FlatCAMGerber.py:368 appTools/ToolCopperThieving.py:575
#: appTools/ToolCopperThieving.py:778 appTools/ToolCopperThieving.py:791
#: appTools/ToolIsolation.py:1449 appTools/ToolNCC.py:1896
#: appTools/ToolNCC.py:1923 appTools/ToolNCC.py:2031 appTools/ToolNCC.py:2044
#: appTools/ToolNCC.py:2946 appTools/ToolNCC.py:3051 appTools/ToolNCC.py:3066
#: appTools/ToolNCC.py:3333 appTools/ToolNCC.py:3434 appTools/ToolNCC.py:3449
#: camlib.py:1113
msgid "Buffering"
msgstr "Buffering"

#: appGUI/preferences/gerber/GerberAdvOptPrefGroupUI.py:66
msgid ""
"Buffering type:\n"
"- None --> best performance, fast file loading but no so good display\n"
"- Full --> slow file loading but good visuals. This is the default.\n"
"<<WARNING>>: Don't change this unless you know what you are doing !!!"
msgstr ""
"Buffering type:\n"
"- None --> best performance, fast file loading but no so good display\n"
"- Full --> slow file loading but good visuals. This is the default.\n"
"<<WARNING>>: Don't change this unless you know what you are doing !!!"

#: appGUI/preferences/gerber/GerberAdvOptPrefGroupUI.py:71
#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:296
#: appGUI/preferences/tools/Tools2FiducialsPrefGroupUI.py:88
#: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:196
#: appObjects/FlatCAMObj.py:755 appObjects/FlatCAMObj.py:758
#: appObjects/FlatCAMObj.py:761 appObjects/FlatCAMObj.py:789
#: appObjects/FlatCAMObj.py:796 appObjects/FlatCAMObj.py:799
#: appTools/ToolCopperThieving.py:1674 appTools/ToolFiducials.py:844
#: appTools/ToolFilm.py:1106 appTools/ToolProperties.py:449
#: appTools/ToolProperties.py:452 appTools/ToolProperties.py:455
#: appTools/ToolProperties.py:483 appTools/ToolProperties.py:490
#: appTools/ToolProperties.py:493
msgid "None"
msgstr "None"

#: appGUI/preferences/gerber/GerberAdvOptPrefGroupUI.py:77
msgid "Delayed Buffering"
msgstr "Delayed Buffering"

#: appGUI/preferences/gerber/GerberAdvOptPrefGroupUI.py:79
msgid "When checked it will do the buffering in background."
msgstr "When checked it will do the buffering in background."

#: appGUI/preferences/gerber/GerberAdvOptPrefGroupUI.py:84
msgid "Simplify"
msgstr "Simplify"

#: appGUI/preferences/gerber/GerberAdvOptPrefGroupUI.py:86
msgid ""
"When checked all the Gerber polygons will be\n"
"loaded with simplification having a set tolerance.\n"
"<<WARNING>>: Don't change this unless you know what you are doing !!!"
msgstr ""
"When checked all the Gerber polygons will be\n"
"loaded with simplification having a set tolerance.\n"
"<<WARNING>>: Don't change this unless you know what you are doing !!!"

#: appGUI/preferences/gerber/GerberAdvOptPrefGroupUI.py:93
msgid "Tolerance"
msgstr "Tolerance"

#: appGUI/preferences/gerber/GerberAdvOptPrefGroupUI.py:94
msgid "Tolerance for polygon simplification."
msgstr "Tolerance for polygon simplification."

#: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:33
msgid "A list of Gerber Editor parameters."
msgstr "A list of Gerber Editor parameters."

#: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:43
msgid ""
"Set the number of selected Gerber geometry\n"
"items above which the utility geometry\n"
"becomes just a selection rectangle.\n"
"Increases the performance when moving a\n"
"large number of geometric elements."
msgstr ""
"Set the number of selected Gerber geometry\n"
"items above which the utility geometry\n"
"becomes just a selection rectangle.\n"
"Increases the performance when moving a\n"
"large number of geometric elements."

#: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:56
msgid "New Aperture code"
msgstr "New Aperture code"

#: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:69
msgid "New Aperture size"
msgstr "New Aperture size"

#: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:71
msgid "Size for the new aperture"
msgstr "Size for the new aperture"

#: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:82
msgid "New Aperture type"
msgstr "New Aperture type"

#: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:84
msgid ""
"Type for the new aperture.\n"
"Can be 'C', 'R' or 'O'."
msgstr ""
"Type for the new aperture.\n"
"Can be 'C', 'R' or 'O'."

#: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:106
msgid "Aperture Dimensions"
msgstr "Aperture Dimensions"

#: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:117
msgid "Linear Pad Array"
msgstr "Linear Pad Array"

#: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:161
msgid "Circular Pad Array"
msgstr "Circular Pad Array"

#: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:197
msgid "Distance at which to buffer the Gerber element."
msgstr "Distance at which to buffer the Gerber element."

#: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:206
msgid "Scale Tool"
msgstr "Scale Tool"

#: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:212
msgid "Factor to scale the Gerber element."
msgstr "Factor to scale the Gerber element."

#: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:225
msgid "Threshold low"
msgstr "Threshold low"

#: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:227
msgid "Threshold value under which the apertures are not marked."
msgstr "Threshold value under which the apertures are not marked."

#: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:237
msgid "Threshold high"
msgstr "Threshold high"

#: appGUI/preferences/gerber/GerberEditorPrefGroupUI.py:239
msgid "Threshold value over which the apertures are not marked."
msgstr "Threshold value over which the apertures are not marked."

#: appGUI/preferences/gerber/GerberExpPrefGroupUI.py:27
msgid "Gerber Export"
msgstr "Gerber Export"

#: appGUI/preferences/gerber/GerberExpPrefGroupUI.py:33
msgid ""
"The parameters set here are used in the file exported\n"
"when using the File -> Export -> Export Gerber menu entry."
msgstr ""
"The parameters set here are used in the file exported\n"
"when using the File -> Export -> Export Gerber menu entry."

#: appGUI/preferences/gerber/GerberExpPrefGroupUI.py:44
#: appGUI/preferences/gerber/GerberExpPrefGroupUI.py:50
#: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:84
#: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:90
msgid "The units used in the Gerber file."
msgstr "The units used in the Gerber file."

#: appGUI/preferences/gerber/GerberExpPrefGroupUI.py:58
msgid ""
"The number of digits in the whole part of the number\n"
"and in the fractional part of the number."
msgstr ""
"The number of digits in the whole part of the number\n"
"and in the fractional part of the number."

#: appGUI/preferences/gerber/GerberExpPrefGroupUI.py:71
msgid ""
"This numbers signify the number of digits in\n"
"the whole part of Gerber coordinates."
msgstr ""
"This numbers signify the number of digits in\n"
"the whole part of Gerber coordinates."

#: appGUI/preferences/gerber/GerberExpPrefGroupUI.py:87
msgid ""
"This numbers signify the number of digits in\n"
"the decimal part of Gerber coordinates."
msgstr ""
"This numbers signify the number of digits in\n"
"the decimal part of Gerber coordinates."

#: appGUI/preferences/gerber/GerberExpPrefGroupUI.py:99
#: appGUI/preferences/gerber/GerberExpPrefGroupUI.py:109
#: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:100
#: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:110
msgid ""
"This sets the type of Gerber zeros.\n"
"If LZ then Leading Zeros are removed and\n"
"Trailing Zeros are kept.\n"
"If TZ is checked then Trailing Zeros are removed\n"
"and Leading Zeros are kept."
msgstr ""
"This sets the type of Gerber zeros.\n"
"If LZ then Leading Zeros are removed and\n"
"Trailing Zeros are kept.\n"
"If TZ is checked then Trailing Zeros are removed\n"
"and Leading Zeros are kept."

#: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:27
msgid "Gerber General"
msgstr "Gerber General"

#: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:61
msgid ""
"The number of circle steps for Gerber \n"
"circular aperture linear approximation."
msgstr ""
"The number of circle steps for Gerber \n"
"circular aperture linear approximation."

#: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:73
msgid "Default Values"
msgstr "Default Values"

#: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:75
msgid ""
"Those values will be used as fallback values\n"
"in case that they are not found in the Gerber file."
msgstr ""
"Those values will be used as fallback values\n"
"in case that they are not found in the Gerber file."

#: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:126
msgid "Clean Apertures"
msgstr "Clean Apertures"

#: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:128
msgid ""
"Will remove apertures that do not have geometry\n"
"thus lowering the number of apertures in the Gerber object."
msgstr ""
"Will remove apertures that do not have geometry\n"
"thus lowering the number of apertures in the Gerber object."

#: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:134
msgid "Polarity change buffer"
msgstr "Polarity change buffer"

#: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:136
msgid ""
"Will apply extra buffering for the\n"
"solid geometry when we have polarity changes.\n"
"May help loading Gerber files that otherwise\n"
"do not load correctly."
msgstr ""
"Will apply extra buffering for the\n"
"solid geometry when we have polarity changes.\n"
"May help loading Gerber files that otherwise\n"
"do not load correctly."

#: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:144
msgid "Store colors"
msgstr "Store colors"

#: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:146
msgid ""
"It will store the set colors for Gerber objects.\n"
"Those will be used each time the application is started."
msgstr ""
"It will store the set colors for Gerber objects.\n"
"Those will be used each time the application is started."

#: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:152
msgid "Clear Colors"
msgstr "Clear Colors"

#: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:155
msgid "Reset the colors associated with Gerber objects."
msgstr "Reset the colors associated with Gerber objects."

#: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:229
msgid "Stored colors for Gerber objects are deleted."
msgstr "Stored colors for Gerber objects are deleted."

#: appGUI/preferences/gerber/GerberOptPrefGroupUI.py:29
msgid "Gerber Options"
msgstr "Gerber Options"

#: appGUI/preferences/gerber/GerberOptPrefGroupUI.py:61
#: appGUI/preferences/gerber/GerberOptPrefGroupUI.py:92
msgid "Rounded Geo"
msgstr "Rounded Geo"

#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:27
msgid "Copper Thieving Tool Options"
msgstr "Copper Thieving Tool Options"

#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:39
msgid ""
"A tool to generate a Copper Thieving that can be added\n"
"to a selected Gerber file."
msgstr ""
"A tool to generate a Copper Thieving that can be added\n"
"to a selected Gerber file."

#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:47
msgid "Number of steps (lines) used to interpolate circles."
msgstr "Number of steps (lines) used to interpolate circles."

#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:57
#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:274
#: appTools/ToolCopperThieving.py:1269 appTools/ToolCopperThieving.py:1630
msgid "Clearance"
msgstr "Clearance"

#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:59
msgid ""
"This set the distance between the copper Thieving components\n"
"(the polygon fill may be split in multiple polygons)\n"
"and the copper traces in the Gerber file."
msgstr ""
"This set the distance between the copper Thieving components\n"
"(the polygon fill may be split in multiple polygons)\n"
"and the copper traces in the Gerber file."

#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:85
#: appGUI/preferences/tools/ToolsCalculatorsPrefGroupUI.py:119
#: appTools/ToolCalculators.py:342 appTools/ToolCalculators.py:385
#: appTools/ToolCopperThieving.py:1298
msgid "Area"
msgstr "Area"

#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:87
#: appTools/ToolCopperThieving.py:1300
msgid "Thieving areas with area less then this value will not be added."
msgstr "Thieving areas with area less then this value will not be added."

#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:99
#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:309
#: appTools/ToolCopperThieving.py:1321 appTools/ToolNCC.py:4408
msgid "Itself"
msgstr "Itself"

#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:100
#: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:295
#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:309
#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:278
#: appTools/ToolCopperThieving.py:1322 appTools/ToolIsolation.py:3483
#: appTools/ToolNCC.py:4408 appTools/ToolPaint.py:3116
msgid "Area Selection"
msgstr "Area Selection"

#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:101
#: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:295
#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:309
#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:278
#: appTools/ToolCopperThieving.py:1323 appTools/ToolDblSided.py:761
#: appTools/ToolIsolation.py:3483 appTools/ToolNCC.py:4408
#: appTools/ToolPaint.py:3116 tclCommands/TclCommandPaint.py:166
msgid "Reference Object"
msgstr "Reference Object"

#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:103
#: appTools/ToolCopperThieving.py:1325
msgid "Reference:"
msgstr "Reference:"

#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:105
msgid ""
"- 'Itself' - the copper Thieving extent is based on the object extent.\n"
"- 'Area Selection' - left mouse click to start selection of the area to be "
"filled.\n"
"- 'Reference Object' - will do copper thieving within the area specified by "
"another object."
msgstr ""
"- 'Itself' - the copper Thieving extent is based on the object extent.\n"
"- 'Area Selection' - left mouse click to start selection of the area to be "
"filled.\n"
"- 'Reference Object' - will do copper thieving within the area specified by "
"another object."

#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:114
#: appGUI/preferences/tools/Tools2EDrillsPrefGroupUI.py:76
#: appGUI/preferences/tools/Tools2EDrillsPrefGroupUI.py:188
#: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:76
#: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:190
#: appTools/ToolCopperThieving.py:1372 appTools/ToolExtractDrills.py:495
#: appTools/ToolExtractDrills.py:628 appTools/ToolPunchGerber.py:1068
#: appTools/ToolPunchGerber.py:1240
msgid "Rectangular"
msgstr "Rectangular"

#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:115
#: appTools/ToolCopperThieving.py:1373
msgid "Minimal"
msgstr "Minimal"

#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:117
#: appTools/ToolCopperThieving.py:1366 appTools/ToolFilm.py:958
msgid "Box Type:"
msgstr "Box Type:"

#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:119
#: appTools/ToolCopperThieving.py:1368
msgid ""
"- 'Rectangular' - the bounding box will be of rectangular shape.\n"
"- 'Minimal' - the bounding box will be the convex hull shape."
msgstr ""
"- 'Rectangular' - the bounding box will be of rectangular shape.\n"
"- 'Minimal' - the bounding box will be the convex hull shape."

#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:133
#: appTools/ToolCopperThieving.py:1389
msgid "Dots Grid"
msgstr "Dots Grid"

#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:134
#: appTools/ToolCopperThieving.py:1390
msgid "Squares Grid"
msgstr "Squares Grid"

#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:135
#: appTools/ToolCopperThieving.py:1391
msgid "Lines Grid"
msgstr "Lines Grid"

#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:137
#: appTools/ToolCopperThieving.py:1393
msgid "Fill Type:"
msgstr "Fill Type:"

#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:139
#: appTools/ToolCopperThieving.py:1395
msgid ""
"- 'Solid' - copper thieving will be a solid polygon.\n"
"- 'Dots Grid' - the empty area will be filled with a pattern of dots.\n"
"- 'Squares Grid' - the empty area will be filled with a pattern of squares.\n"
"- 'Lines Grid' - the empty area will be filled with a pattern of lines."
msgstr ""
"- 'Solid' - copper thieving will be a solid polygon.\n"
"- 'Dots Grid' - the empty area will be filled with a pattern of dots.\n"
"- 'Squares Grid' - the empty area will be filled with a pattern of squares.\n"
"- 'Lines Grid' - the empty area will be filled with a pattern of lines."

#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:147
#: appTools/ToolCopperThieving.py:1414
msgid "Dots Grid Parameters"
msgstr "Dots Grid Parameters"

#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:153
#: appTools/ToolCopperThieving.py:1420
msgid "Dot diameter in Dots Grid."
msgstr "Dot diameter in Dots Grid."

#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:166
#: appTools/ToolCopperThieving.py:1433
msgid "Distance between each two dots in Dots Grid."
msgstr "Distance between each two dots in Dots Grid."

#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:176
#: appTools/ToolCopperThieving.py:1454
msgid "Squares Grid Parameters"
msgstr "Squares Grid Parameters"

#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:182
#: appTools/ToolCopperThieving.py:1460
msgid "Square side size in Squares Grid."
msgstr "Square side size in Squares Grid."

#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:195
#: appTools/ToolCopperThieving.py:1473
msgid "Distance between each two squares in Squares Grid."
msgstr "Distance between each two squares in Squares Grid."

#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:205
#: appTools/ToolCopperThieving.py:1494
msgid "Lines Grid Parameters"
msgstr "Lines Grid Parameters"

#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:211
#: appTools/ToolCopperThieving.py:1500
msgid "Line thickness size in Lines Grid."
msgstr "Line thickness size in Lines Grid."

#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:224
#: appTools/ToolCopperThieving.py:1513
msgid "Distance between each two lines in Lines Grid."
msgstr "Distance between each two lines in Lines Grid."

#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:234
#: appTools/ToolCopperThieving.py:1552
msgid "Robber Bar Parameters"
msgstr "Robber Bar Parameters"

#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:236
#: appTools/ToolCopperThieving.py:1554
msgid ""
"Parameters used for the robber bar.\n"
"Robber bar = copper border to help in pattern hole plating."
msgstr ""
"Parameters used for the robber bar.\n"
"Robber bar = copper border to help in pattern hole plating."

#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:244
#: appTools/ToolCopperThieving.py:1562
msgid "Bounding box margin for robber bar."
msgstr "Bounding box margin for robber bar."

#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:255
#: appGUI/preferences/tools/ToolsCornersPrefGroupUI.py:56
#: appTools/ToolCopperThieving.py:1573 appTools/ToolCorners.py:560
#: appTools/ToolEtchCompensation.py:370
msgid "Thickness"
msgstr "Thickness"

#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:257
#: appTools/ToolCopperThieving.py:1575
msgid "The robber bar thickness."
msgstr "The robber bar thickness."

#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:267
#: appTools/ToolCopperThieving.py:1607
msgid "Pattern Plating Mask"
msgstr "Pattern Plating Mask"

#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:269
#: appTools/ToolCopperThieving.py:1609
msgid "Generate a mask for pattern plating."
msgstr "Generate a mask for pattern plating."

#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:276
#: appTools/ToolCopperThieving.py:1632
msgid ""
"The distance between the possible copper thieving elements\n"
"and/or robber bar and the actual openings in the mask."
msgstr ""
"The distance between the possible copper thieving elements\n"
"and/or robber bar and the actual openings in the mask."

#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:290
#: appTools/ToolCopperThieving.py:1668
msgid "Choose which additional geometry to include, if available."
msgstr "Choose which additional geometry to include, if available."

#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:294
#: appTools/ToolCopperThieving.py:499 appTools/ToolCopperThieving.py:503
#: appTools/ToolCopperThieving.py:565 appTools/ToolCopperThieving.py:1672
msgid "Thieving"
msgstr "Thieving"

#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:295
#: appTools/ToolCopperThieving.py:1673
msgid "Robber bar"
msgstr "Robber bar"

#: appGUI/preferences/tools/Tools2CalPrefGroupUI.py:27
msgid "Calibration Tool Options"
msgstr "Calibration Tool Options"

#: appGUI/preferences/tools/Tools2CalPrefGroupUI.py:38
#: appGUI/preferences/tools/Tools2EDrillsPrefGroupUI.py:38
#: appGUI/preferences/tools/Tools2FiducialsPrefGroupUI.py:38
#: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:38
#: appGUI/preferences/tools/ToolsCornersPrefGroupUI.py:37
#: appTools/ToolCopperThieving.py:1264 appTools/ToolCorners.py:541
#: appTools/ToolFiducials.py:794
msgid "Parameters used for this tool."
msgstr "Parameters used for this tool."

#: appGUI/preferences/tools/Tools2CalPrefGroupUI.py:43
#: appTools/ToolCalibration.py:876
msgid "Source Type"
msgstr "Source Type"

#: appGUI/preferences/tools/Tools2CalPrefGroupUI.py:44
#: appTools/ToolCalibration.py:877
msgid ""
"The source of calibration points.\n"
"It can be:\n"
"- Object -> click a hole geo for Excellon or a pad for Gerber\n"
"- Free -> click freely on canvas to acquire the calibration points"
msgstr ""
"The source of calibration points.\n"
"It can be:\n"
"- Object -> click a hole geo for Excellon or a pad for Gerber\n"
"- Free -> click freely on canvas to acquire the calibration points"

#: appGUI/preferences/tools/Tools2CalPrefGroupUI.py:49
#: appTools/ToolCalibration.py:882
msgid "Free"
msgstr "Free"

#: appGUI/preferences/tools/Tools2CalPrefGroupUI.py:63
#: appTools/ToolCalibration.py:771
msgid "Height (Z) for travelling between the points."
msgstr "Height (Z) for travelling between the points."

#: appGUI/preferences/tools/Tools2CalPrefGroupUI.py:75
#: appTools/ToolCalibration.py:783
msgid "Verification Z"
msgstr "Verification Z"

#: appGUI/preferences/tools/Tools2CalPrefGroupUI.py:77
#: appTools/ToolCalibration.py:785
msgid "Height (Z) for checking the point."
msgstr "Height (Z) for checking the point."

#: appGUI/preferences/tools/Tools2CalPrefGroupUI.py:89
#: appTools/ToolCalibration.py:797
msgid "Zero Z tool"
msgstr "Zero Z tool"

#: appGUI/preferences/tools/Tools2CalPrefGroupUI.py:91
#: appTools/ToolCalibration.py:799
msgid ""
"Include a sequence to zero the height (Z)\n"
"of the verification tool."
msgstr ""
"Include a sequence to zero the height (Z)\n"
"of the verification tool."

#: appGUI/preferences/tools/Tools2CalPrefGroupUI.py:100
#: appTools/ToolCalibration.py:808
msgid "Height (Z) for mounting the verification probe."
msgstr "Height (Z) for mounting the verification probe."

#: appGUI/preferences/tools/Tools2CalPrefGroupUI.py:114
#: appTools/ToolCalibration.py:822
msgid ""
"Toolchange X,Y position.\n"
"If no value is entered then the current\n"
"(x, y) point will be used,"
msgstr ""
"Toolchange X,Y position.\n"
"If no value is entered then the current\n"
"(x, y) point will be used,"

#: appGUI/preferences/tools/Tools2CalPrefGroupUI.py:125
#: appTools/ToolCalibration.py:848
msgid "Second point"
msgstr "Second point"

#: appGUI/preferences/tools/Tools2CalPrefGroupUI.py:127
#: appTools/ToolCalibration.py:850
msgid ""
"Second point in the Gcode verification can be:\n"
"- top-left -> the user will align the PCB vertically\n"
"- bottom-right -> the user will align the PCB horizontally"
msgstr ""
"Second point in the Gcode verification can be:\n"
"- top-left -> the user will align the PCB vertically\n"
"- bottom-right -> the user will align the PCB horizontally"

#: appGUI/preferences/tools/Tools2CalPrefGroupUI.py:131
#: appTools/ToolCalibration.py:854 app_Main.py:5127
msgid "Top-Left"
msgstr "Top-Left"

#: appGUI/preferences/tools/Tools2CalPrefGroupUI.py:132
#: appTools/ToolCalibration.py:855 app_Main.py:5128
msgid "Bottom-Right"
msgstr "Bottom-Right"

#: appGUI/preferences/tools/Tools2EDrillsPrefGroupUI.py:27
msgid "Extract Drills Options"
msgstr "Extract Drills Options"

#: appGUI/preferences/tools/Tools2EDrillsPrefGroupUI.py:42
#: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:42
#: appTools/ToolExtractDrills.py:461 appTools/ToolPunchGerber.py:1021
msgid "Processed Pads Type"
msgstr "Processed Pads Type"

#: appGUI/preferences/tools/Tools2EDrillsPrefGroupUI.py:44
#: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:44
#: appTools/ToolExtractDrills.py:463 appTools/ToolPunchGerber.py:1023
msgid ""
"The type of pads shape to be processed.\n"
"If the PCB has many SMD pads with rectangular pads,\n"
"disable the Rectangular aperture."
msgstr ""
"The type of pads shape to be processed.\n"
"If the PCB has many SMD pads with rectangular pads,\n"
"disable the Rectangular aperture."

#: appGUI/preferences/tools/Tools2EDrillsPrefGroupUI.py:54
#: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:54
#: appTools/ToolExtractDrills.py:473 appTools/ToolPunchGerber.py:1046
msgid "Process Circular Pads."
msgstr "Process Circular Pads."

#: appGUI/preferences/tools/Tools2EDrillsPrefGroupUI.py:60
#: appGUI/preferences/tools/Tools2EDrillsPrefGroupUI.py:162
#: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:60
#: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:164
#: appTools/ToolExtractDrills.py:479 appTools/ToolExtractDrills.py:602
#: appTools/ToolPunchGerber.py:1052 appTools/ToolPunchGerber.py:1214
msgid "Oblong"
msgstr "Oblong"

#: appGUI/preferences/tools/Tools2EDrillsPrefGroupUI.py:62
#: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:62
#: appTools/ToolExtractDrills.py:481 appTools/ToolPunchGerber.py:1054
msgid "Process Oblong Pads."
msgstr "Process Oblong Pads."

#: appGUI/preferences/tools/Tools2EDrillsPrefGroupUI.py:70
#: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:70
#: appTools/ToolExtractDrills.py:489 appTools/ToolPunchGerber.py:1062
msgid "Process Square Pads."
msgstr "Process Square Pads."

#: appGUI/preferences/tools/Tools2EDrillsPrefGroupUI.py:78
#: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:78
#: appTools/ToolExtractDrills.py:497 appTools/ToolPunchGerber.py:1070
msgid "Process Rectangular Pads."
msgstr "Process Rectangular Pads."

#: appGUI/preferences/tools/Tools2EDrillsPrefGroupUI.py:84
#: appGUI/preferences/tools/Tools2EDrillsPrefGroupUI.py:201
#: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:84
#: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:203
#: appObjects/FlatCAMObj.py:505 appTools/ToolExtractDrills.py:503
#: appTools/ToolExtractDrills.py:641 appTools/ToolProperties.py:171
#: appTools/ToolPunchGerber.py:1076 appTools/ToolPunchGerber.py:1253
msgid "Others"
msgstr "Others"

#: appGUI/preferences/tools/Tools2EDrillsPrefGroupUI.py:86
#: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:86
#: appTools/ToolExtractDrills.py:505 appTools/ToolPunchGerber.py:1078
msgid "Process pads not in the categories above."
msgstr "Process pads not in the categories above."

#: appGUI/preferences/tools/Tools2EDrillsPrefGroupUI.py:99
#: appGUI/preferences/tools/Tools2EDrillsPrefGroupUI.py:123
#: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:100
#: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:125
#: appTools/ToolExtractDrills.py:532 appTools/ToolExtractDrills.py:549
#: appTools/ToolPunchGerber.py:1129 appTools/ToolPunchGerber.py:1158
msgid "Fixed Diameter"
msgstr "Fixed Diameter"

#: appGUI/preferences/tools/Tools2EDrillsPrefGroupUI.py:100
#: appGUI/preferences/tools/Tools2EDrillsPrefGroupUI.py:140
#: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:101
#: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:142
#: appTools/ToolExtractDrills.py:534 appTools/ToolExtractDrills.py:580
#: appTools/ToolPunchGerber.py:1131 appTools/ToolPunchGerber.py:1186
msgid "Fixed Annular Ring"
msgstr "Fixed Annular Ring"

#: appGUI/preferences/tools/Tools2EDrillsPrefGroupUI.py:101
#: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:102
#: appTools/ToolExtractDrills.py:533 appTools/ToolPunchGerber.py:1130
msgid "Proportional"
msgstr "Proportional"

#: appGUI/preferences/tools/Tools2EDrillsPrefGroupUI.py:107
#: appTools/ToolExtractDrills.py:523
msgid ""
"The method for processing pads. Can be:\n"
"- Fixed Diameter -> all holes will have a set size\n"
"- Fixed Annular Ring -> all holes will have a set annular ring\n"
"- Proportional -> each hole size will be a fraction of the pad size"
msgstr ""
"The method for processing pads. Can be:\n"
"- Fixed Diameter -> all holes will have a set size\n"
"- Fixed Annular Ring -> all holes will have a set annular ring\n"
"- Proportional -> each hole size will be a fraction of the pad size"

#: appGUI/preferences/tools/Tools2EDrillsPrefGroupUI.py:133
#: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:135
#: appTools/ToolExtractDrills.py:559 appTools/ToolPunchGerber.py:1168
msgid "Fixed hole diameter."
msgstr "Fixed hole diameter."

#: appGUI/preferences/tools/Tools2EDrillsPrefGroupUI.py:142
#: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:144
#: appTools/ToolExtractDrills.py:582 appTools/ToolPunchGerber.py:1188
msgid ""
"The size of annular ring.\n"
"The copper sliver between the hole exterior\n"
"and the margin of the copper pad."
msgstr ""
"The size of annular ring.\n"
"The copper sliver between the hole exterior\n"
"and the margin of the copper pad."

#: appGUI/preferences/tools/Tools2EDrillsPrefGroupUI.py:151
#: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:153
#: appTools/ToolExtractDrills.py:591 appTools/ToolPunchGerber.py:1203
msgid "The size of annular ring for circular pads."
msgstr "The size of annular ring for circular pads."

#: appGUI/preferences/tools/Tools2EDrillsPrefGroupUI.py:164
#: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:166
#: appTools/ToolExtractDrills.py:604 appTools/ToolPunchGerber.py:1216
msgid "The size of annular ring for oblong pads."
msgstr "The size of annular ring for oblong pads."

#: appGUI/preferences/tools/Tools2EDrillsPrefGroupUI.py:177
#: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:179
#: appTools/ToolExtractDrills.py:617 appTools/ToolPunchGerber.py:1229
msgid "The size of annular ring for square pads."
msgstr "The size of annular ring for square pads."

#: appGUI/preferences/tools/Tools2EDrillsPrefGroupUI.py:190
#: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:192
#: appTools/ToolExtractDrills.py:630 appTools/ToolPunchGerber.py:1242
msgid "The size of annular ring for rectangular pads."
msgstr "The size of annular ring for rectangular pads."

#: appGUI/preferences/tools/Tools2EDrillsPrefGroupUI.py:203
#: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:205
#: appTools/ToolExtractDrills.py:643 appTools/ToolPunchGerber.py:1255
msgid "The size of annular ring for other pads."
msgstr "The size of annular ring for other pads."

#: appGUI/preferences/tools/Tools2EDrillsPrefGroupUI.py:213
#: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:215
#: appTools/ToolExtractDrills.py:659 appTools/ToolPunchGerber.py:1267
msgid "Proportional Diameter"
msgstr "Proportional Diameter"

#: appGUI/preferences/tools/Tools2EDrillsPrefGroupUI.py:222
#: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:224
msgid "Factor"
msgstr "Factor"

#: appGUI/preferences/tools/Tools2EDrillsPrefGroupUI.py:224
#: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:226
#: appTools/ToolExtractDrills.py:670 appTools/ToolPunchGerber.py:1278
msgid ""
"Proportional Diameter.\n"
"The hole diameter will be a fraction of the pad size."
msgstr ""
"Proportional Diameter.\n"
"The hole diameter will be a fraction of the pad size."

#: appGUI/preferences/tools/Tools2FiducialsPrefGroupUI.py:27
msgid "Fiducials Tool Options"
msgstr "Fiducials Tool Options"

#: appGUI/preferences/tools/Tools2FiducialsPrefGroupUI.py:45
#: appTools/ToolFiducials.py:801
msgid ""
"This set the fiducial diameter if fiducial type is circular,\n"
"otherwise is the size of the fiducial.\n"
"The soldermask opening is double than that."
msgstr ""
"This set the fiducial diameter if fiducial type is circular,\n"
"otherwise is the size of the fiducial.\n"
"The soldermask opening is double than that."

#: appGUI/preferences/tools/Tools2FiducialsPrefGroupUI.py:73
#: appTools/ToolFiducials.py:829
msgid "Auto"
msgstr "Auto"

#: appGUI/preferences/tools/Tools2FiducialsPrefGroupUI.py:76
#: appTools/ToolFiducials.py:832
msgid "Mode:"
msgstr "Mode:"

#: appGUI/preferences/tools/Tools2FiducialsPrefGroupUI.py:78
msgid ""
"- 'Auto' - automatic placement of fiducials in the corners of the bounding "
"box.\n"
"- 'Manual' - manual placement of fiducials."
msgstr ""
"- 'Auto' - automatic placement of fiducials in the corners of the bounding "
"box.\n"
"- 'Manual' - manual placement of fiducials."

#: appGUI/preferences/tools/Tools2FiducialsPrefGroupUI.py:86
#: appTools/ToolFiducials.py:842
msgid "Up"
msgstr "Up"

#: appGUI/preferences/tools/Tools2FiducialsPrefGroupUI.py:87
#: appTools/ToolFiducials.py:843
msgid "Down"
msgstr "Down"

#: appGUI/preferences/tools/Tools2FiducialsPrefGroupUI.py:90
#: appTools/ToolFiducials.py:846
msgid "Second fiducial"
msgstr "Second fiducial"

#: appGUI/preferences/tools/Tools2FiducialsPrefGroupUI.py:92
#: appTools/ToolFiducials.py:848
msgid ""
"The position for the second fiducial.\n"
"- 'Up' - the order is: bottom-left, top-left, top-right.\n"
"- 'Down' - the order is: bottom-left, bottom-right, top-right.\n"
"- 'None' - there is no second fiducial. The order is: bottom-left, top-right."
msgstr ""
"The position for the second fiducial.\n"
"- 'Up' - the order is: bottom-left, top-left, top-right.\n"
"- 'Down' - the order is: bottom-left, bottom-right, top-right.\n"
"- 'None' - there is no second fiducial. The order is: bottom-left, top-right."

#: appGUI/preferences/tools/Tools2FiducialsPrefGroupUI.py:108
#: appGUI/preferences/tools/ToolsCornersPrefGroupUI.py:49
#: appTools/ToolCorners.py:553 appTools/ToolFiducials.py:864
msgid "Cross"
msgstr "Cross"

#: appGUI/preferences/tools/Tools2FiducialsPrefGroupUI.py:109
#: appTools/ToolFiducials.py:865
msgid "Chess"
msgstr "Chess"

#: appGUI/preferences/tools/Tools2FiducialsPrefGroupUI.py:112
#: appTools/ToolFiducials.py:867
msgid "Fiducial Type"
msgstr "Fiducial Type"

#: appGUI/preferences/tools/Tools2FiducialsPrefGroupUI.py:114
#: appTools/ToolFiducials.py:869
msgid ""
"The type of fiducial.\n"
"- 'Circular' - this is the regular fiducial.\n"
"- 'Cross' - cross lines fiducial.\n"
"- 'Chess' - chess pattern fiducial."
msgstr ""
"The type of fiducial.\n"
"- 'Circular' - this is the regular fiducial.\n"
"- 'Cross' - cross lines fiducial.\n"
"- 'Chess' - chess pattern fiducial."

#: appGUI/preferences/tools/Tools2FiducialsPrefGroupUI.py:123
#: appTools/ToolFiducials.py:878
msgid "Line thickness"
msgstr "Line thickness"

#: appGUI/preferences/tools/Tools2InvertPrefGroupUI.py:27
msgid "Invert Gerber Tool Options"
msgstr "Invert Gerber Tool Options"

#: appGUI/preferences/tools/Tools2InvertPrefGroupUI.py:33
msgid ""
"A tool to invert Gerber geometry from positive to negative\n"
"and in revers."
msgstr ""
"A tool to invert Gerber geometry from positive to negative\n"
"and in revers."

#: appGUI/preferences/tools/Tools2InvertPrefGroupUI.py:47
#: appTools/ToolInvertGerber.py:233
msgid ""
"Distance by which to avoid\n"
"the edges of the Gerber object."
msgstr ""
"Distance by which to avoid\n"
"the edges of the Gerber object."

#: appGUI/preferences/tools/Tools2InvertPrefGroupUI.py:58
#: appTools/ToolInvertGerber.py:244
msgid "Lines Join Style"
msgstr "Lines Join Style"

#: appGUI/preferences/tools/Tools2InvertPrefGroupUI.py:60
#: appTools/ToolInvertGerber.py:246
msgid ""
"The way that the lines in the object outline will be joined.\n"
"Can be:\n"
"- rounded -> an arc is added between two joining lines\n"
"- square -> the lines meet in 90 degrees angle\n"
"- bevel -> the lines are joined by a third line"
msgstr ""
"The way that the lines in the object outline will be joined.\n"
"Can be:\n"
"- rounded -> an arc is added between two joining lines\n"
"- square -> the lines meet in 90 degrees angle\n"
"- bevel -> the lines are joined by a third line"

#: appGUI/preferences/tools/Tools2InvertPrefGroupUI.py:69
#: appTools/ToolInvertGerber.py:255
msgid "Bevel"
msgstr "Bevel"

#: appGUI/preferences/tools/Tools2OptimalPrefGroupUI.py:27
msgid "Optimal Tool Options"
msgstr "Optimal Tool Options"

#: appGUI/preferences/tools/Tools2OptimalPrefGroupUI.py:33
msgid ""
"A tool to find the minimum distance between\n"
"every two Gerber geometric elements"
msgstr ""
"A tool to find the minimum distance between\n"
"every two Gerber geometric elements"

#: appGUI/preferences/tools/Tools2OptimalPrefGroupUI.py:48
#: appTools/ToolOptimal.py:434
msgid "Precision"
msgstr "Precision"

#: appGUI/preferences/tools/Tools2OptimalPrefGroupUI.py:50
msgid "Number of decimals for the distances and coordinates in this tool."
msgstr "Number of decimals for the distances and coordinates in this tool."

#: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:27
msgid "Punch Gerber Options"
msgstr "Punch Gerber Options"

#: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:108
#: appTools/ToolPunchGerber.py:1120
msgid ""
"The punch hole source can be:\n"
"- Excellon Object-> the Excellon object drills center will serve as "
"reference.\n"
"- Fixed Diameter -> will try to use the pads center as reference adding "
"fixed diameter holes.\n"
"- Fixed Annular Ring -> will try to keep a set annular ring.\n"
"- Proportional -> will make a Gerber punch hole having the diameter a "
"percentage of the pad diameter."
msgstr ""
"The punch hole source can be:\n"
"- Excellon Object-> the Excellon object drills center will serve as "
"reference.\n"
"- Fixed Diameter -> will try to use the pads center as reference adding "
"fixed diameter holes.\n"
"- Fixed Annular Ring -> will try to keep a set annular ring.\n"
"- Proportional -> will make a Gerber punch hole having the diameter a "
"percentage of the pad diameter."

#: appGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:27
msgid "QRCode Tool Options"
msgstr "QRCode Tool Options"

#: appGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:33
msgid ""
"A tool to create a QRCode that can be inserted\n"
"into a selected Gerber file, or it can be exported as a file."
msgstr ""
"A tool to create a QRCode that can be inserted\n"
"into a selected Gerber file, or it can be exported as a file."

#: appGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:45
#: appTools/ToolQRCode.py:709 app_Main.py:7561
msgid "Version"
msgstr "Version"

#: appGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:47
#: appTools/ToolQRCode.py:711
msgid ""
"QRCode version can have values from 1 (21x21 boxes)\n"
"to 40 (177x177 boxes)."
msgstr ""
"QRCode version can have values from 1 (21x21 boxes)\n"
"to 40 (177x177 boxes)."

#: appGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:58
#: appTools/ToolQRCode.py:722
msgid "Error correction"
msgstr "Error correction"

#: appGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:60
#: appGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:71
#: appTools/ToolQRCode.py:724 appTools/ToolQRCode.py:735
#, python-format
msgid ""
"Parameter that controls the error correction used for the QR Code.\n"
"L = maximum 7%% errors can be corrected\n"
"M = maximum 15%% errors can be corrected\n"
"Q = maximum 25%% errors can be corrected\n"
"H = maximum 30%% errors can be corrected."
msgstr ""
"Parameter that controls the error correction used for the QR Code.\n"
"L = maximum 7%% errors can be corrected\n"
"M = maximum 15%% errors can be corrected\n"
"Q = maximum 25%% errors can be corrected\n"
"H = maximum 30%% errors can be corrected."

#: appGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:81
#: appTools/ToolQRCode.py:745
msgid "Box Size"
msgstr "Box Size"

#: appGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:83
#: appTools/ToolQRCode.py:747
msgid ""
"Box size control the overall size of the QRcode\n"
"by adjusting the size of each box in the code."
msgstr ""
"Box size control the overall size of the QRcode\n"
"by adjusting the size of each box in the code."

#: appGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:94
#: appTools/ToolQRCode.py:758
msgid "Border Size"
msgstr "Border Size"

#: appGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:96
#: appTools/ToolQRCode.py:760
msgid ""
"Size of the QRCode border. How many boxes thick is the border.\n"
"Default value is 4. The width of the clearance around the QRCode."
msgstr ""
"Size of the QRCode border. How many boxes thick is the border.\n"
"Default value is 4. The width of the clearance around the QRCode."

#: appGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:107
#: appTools/ToolQRCode.py:680
msgid "QRCode Data"
msgstr "QRCode Data"

#: appGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:109
#: appTools/ToolQRCode.py:682
msgid "QRCode Data. Alphanumeric text to be encoded in the QRCode."
msgstr "QRCode Data. Alphanumeric text to be encoded in the QRCode."

#: appGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:113
#: appTools/ToolQRCode.py:686
msgid "Add here the text to be included in the QRCode..."
msgstr "Add here the text to be included in the QRCode..."

#: appGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:119
#: appTools/ToolQRCode.py:771
msgid "Polarity"
msgstr "Polarity"

#: appGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:121
#: appTools/ToolQRCode.py:773
msgid ""
"Choose the polarity of the QRCode.\n"
"It can be drawn in a negative way (squares are clear)\n"
"or in a positive way (squares are opaque)."
msgstr ""
"Choose the polarity of the QRCode.\n"
"It can be drawn in a negative way (squares are clear)\n"
"or in a positive way (squares are opaque)."

#: appGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:125
#: appTools/ToolFilm.py:1148 appTools/ToolQRCode.py:777
msgid "Negative"
msgstr "Negative"

#: appGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:126
#: appTools/ToolFilm.py:1147 appTools/ToolQRCode.py:778
msgid "Positive"
msgstr "Positive"

#: appGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:128
#: appTools/ToolQRCode.py:780
msgid ""
"Choose the type of QRCode to be created.\n"
"If added on a Silkscreen Gerber file the QRCode may\n"
"be added as positive. If it is added to a Copper Gerber\n"
"file then perhaps the QRCode can be added as negative."
msgstr ""
"Choose the type of QRCode to be created.\n"
"If added on a Silkscreen Gerber file the QRCode may\n"
"be added as positive. If it is added to a Copper Gerber\n"
"file then perhaps the QRCode can be added as negative."

#: appGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:139
#: appGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:145
#: appTools/ToolQRCode.py:791 appTools/ToolQRCode.py:797
msgid ""
"The bounding box, meaning the empty space that surrounds\n"
"the QRCode geometry, can have a rounded or a square shape."
msgstr ""
"The bounding box, meaning the empty space that surrounds\n"
"the QRCode geometry, can have a rounded or a square shape."

#: appGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:152
#: appTools/ToolQRCode.py:825
msgid "Fill Color"
msgstr "Fill Color"

#: appGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:154
#: appTools/ToolQRCode.py:827
msgid "Set the QRCode fill color (squares color)."
msgstr "Set the QRCode fill color (squares color)."

#: appGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:162
#: appTools/ToolQRCode.py:849
msgid "Back Color"
msgstr "Back Color"

#: appGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:164
#: appTools/ToolQRCode.py:851
msgid "Set the QRCode background color."
msgstr "Set the QRCode background color."

#: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:27
msgid "Check Rules Tool Options"
msgstr "Check Rules Tool Options"

#: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:32
msgid ""
"A tool to check if Gerber files are within a set\n"
"of Manufacturing Rules."
msgstr ""
"A tool to check if Gerber files are within a set\n"
"of Manufacturing Rules."

#: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:42
#: appTools/ToolRulesCheck.py:428 appTools/ToolRulesCheck.py:1375
msgid "Trace Size"
msgstr "Trace Size"

#: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:44
#: appTools/ToolRulesCheck.py:1377
msgid "This checks if the minimum size for traces is met."
msgstr "This checks if the minimum size for traces is met."

#: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:54
#: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:74
#: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:94
#: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:114
#: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:134
#: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:154
#: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:174
#: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:194
#: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:216
#: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:236
#: appTools/ToolRulesCheck.py:1387 appTools/ToolRulesCheck.py:1409
#: appTools/ToolRulesCheck.py:1432 appTools/ToolRulesCheck.py:1455
#: appTools/ToolRulesCheck.py:1478 appTools/ToolRulesCheck.py:1501
#: appTools/ToolRulesCheck.py:1524 appTools/ToolRulesCheck.py:1547
#: appTools/ToolRulesCheck.py:1572 appTools/ToolRulesCheck.py:1595
msgid "Min value"
msgstr "Min value"

#: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:56
#: appTools/ToolRulesCheck.py:1389
msgid "Minimum acceptable trace size."
msgstr "Minimum acceptable trace size."

#: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:61
#: appTools/ToolRulesCheck.py:659 appTools/ToolRulesCheck.py:689
#: appTools/ToolRulesCheck.py:1396
msgid "Copper to Copper clearance"
msgstr "Copper to Copper clearance"

#: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:63
#: appTools/ToolRulesCheck.py:1398
msgid ""
"This checks if the minimum clearance between copper\n"
"features is met."
msgstr ""
"This checks if the minimum clearance between copper\n"
"features is met."

#: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:76
#: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:96
#: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:116
#: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:136
#: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:156
#: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:176
#: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:238
#: appTools/ToolRulesCheck.py:1411 appTools/ToolRulesCheck.py:1434
#: appTools/ToolRulesCheck.py:1457 appTools/ToolRulesCheck.py:1480
#: appTools/ToolRulesCheck.py:1503 appTools/ToolRulesCheck.py:1526
#: appTools/ToolRulesCheck.py:1574
msgid "Minimum acceptable clearance value."
msgstr "Minimum acceptable clearance value."

#: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:81
#: appTools/ToolRulesCheck.py:719 appTools/ToolRulesCheck.py:725
#: appTools/ToolRulesCheck.py:738 appTools/ToolRulesCheck.py:745
#: appTools/ToolRulesCheck.py:1419
msgid "Copper to Outline clearance"
msgstr "Copper to Outline clearance"

#: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:83
#: appTools/ToolRulesCheck.py:1421
msgid ""
"This checks if the minimum clearance between copper\n"
"features and the outline is met."
msgstr ""
"This checks if the minimum clearance between copper\n"
"features and the outline is met."

#: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:101
#: appTools/ToolRulesCheck.py:1442
msgid "Silk to Silk Clearance"
msgstr "Silk to Silk Clearance"

#: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:103
#: appTools/ToolRulesCheck.py:1444
msgid ""
"This checks if the minimum clearance between silkscreen\n"
"features and silkscreen features is met."
msgstr ""
"This checks if the minimum clearance between silkscreen\n"
"features and silkscreen features is met."

#: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:121
#: appTools/ToolRulesCheck.py:828 appTools/ToolRulesCheck.py:834
#: appTools/ToolRulesCheck.py:852 appTools/ToolRulesCheck.py:1465
msgid "Silk to Solder Mask Clearance"
msgstr "Silk to Solder Mask Clearance"

#: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:123
#: appTools/ToolRulesCheck.py:1467
msgid ""
"This checks if the minimum clearance between silkscreen\n"
"features and soldermask features is met."
msgstr ""
"This checks if the minimum clearance between silkscreen\n"
"features and soldermask features is met."

#: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:141
#: appTools/ToolRulesCheck.py:882 appTools/ToolRulesCheck.py:888
#: appTools/ToolRulesCheck.py:902 appTools/ToolRulesCheck.py:909
#: appTools/ToolRulesCheck.py:1488
msgid "Silk to Outline Clearance"
msgstr "Silk to Outline Clearance"

#: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:143
#: appTools/ToolRulesCheck.py:1490
msgid ""
"This checks if the minimum clearance between silk\n"
"features and the outline is met."
msgstr ""
"This checks if the minimum clearance between silk\n"
"features and the outline is met."

#: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:161
#: appTools/ToolRulesCheck.py:920 appTools/ToolRulesCheck.py:947
#: appTools/ToolRulesCheck.py:1511
msgid "Minimum Solder Mask Sliver"
msgstr "Minimum Solder Mask Sliver"

#: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:163
#: appTools/ToolRulesCheck.py:1513
msgid ""
"This checks if the minimum clearance between soldermask\n"
"features and soldermask features is met."
msgstr ""
"This checks if the minimum clearance between soldermask\n"
"features and soldermask features is met."

#: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:181
#: appTools/ToolRulesCheck.py:985 appTools/ToolRulesCheck.py:991
#: appTools/ToolRulesCheck.py:1007 appTools/ToolRulesCheck.py:1014
#: appTools/ToolRulesCheck.py:1534
msgid "Minimum Annular Ring"
msgstr "Minimum Annular Ring"

#: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:183
#: appTools/ToolRulesCheck.py:1536
msgid ""
"This checks if the minimum copper ring left by drilling\n"
"a hole into a pad is met."
msgstr ""
"This checks if the minimum copper ring left by drilling\n"
"a hole into a pad is met."

#: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:196
#: appTools/ToolRulesCheck.py:1549
msgid "Minimum acceptable ring value."
msgstr "Minimum acceptable ring value."

#: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:203
#: appTools/ToolRulesCheck.py:372 appTools/ToolRulesCheck.py:1559
msgid "Hole to Hole Clearance"
msgstr "Hole to Hole Clearance"

#: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:205
#: appTools/ToolRulesCheck.py:1561
msgid ""
"This checks if the minimum clearance between a drill hole\n"
"and another drill hole is met."
msgstr ""
"This checks if the minimum clearance between a drill hole\n"
"and another drill hole is met."

#: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:218
#: appTools/ToolRulesCheck.py:1597
msgid "Minimum acceptable drill size."
msgstr "Minimum acceptable drill size."

#: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:223
#: appTools/ToolRulesCheck.py:346 appTools/ToolRulesCheck.py:1582
msgid "Hole Size"
msgstr "Hole Size"

#: appGUI/preferences/tools/Tools2RulesCheckPrefGroupUI.py:225
#: appTools/ToolRulesCheck.py:1584
msgid ""
"This checks if the drill holes\n"
"sizes are above the threshold."
msgstr ""
"This checks if the drill holes\n"
"sizes are above the threshold."

#: appGUI/preferences/tools/Tools2sidedPrefGroupUI.py:27
msgid "2Sided Tool Options"
msgstr "2Sided Tool Options"

#: appGUI/preferences/tools/Tools2sidedPrefGroupUI.py:33
msgid ""
"A tool to help in creating a double sided\n"
"PCB using alignment holes."
msgstr ""
"A tool to help in creating a double sided\n"
"PCB using alignment holes."

#: appGUI/preferences/tools/Tools2sidedPrefGroupUI.py:47
msgid "Drill dia"
msgstr "Drill dia"

#: appGUI/preferences/tools/Tools2sidedPrefGroupUI.py:49
#: appTools/ToolDblSided.py:829 appTools/ToolDblSided.py:834
msgid "Diameter of the drill for the alignment holes."
msgstr "Diameter of the drill for the alignment holes."

#: appGUI/preferences/tools/Tools2sidedPrefGroupUI.py:56
msgid "Align Axis"
msgstr "Align Axis"

#: appGUI/preferences/tools/Tools2sidedPrefGroupUI.py:58
#: appGUI/preferences/tools/Tools2sidedPrefGroupUI.py:71
#: appTools/ToolDblSided.py:670 appTools/ToolDblSided.py:845
msgid "Mirror vertically (X) or horizontally (Y)."
msgstr "Mirror vertically (X) or horizontally (Y)."

#: appGUI/preferences/tools/Tools2sidedPrefGroupUI.py:69
msgid "Mirror Axis:"
msgstr "Mirror Axis:"

#: appGUI/preferences/tools/Tools2sidedPrefGroupUI.py:86
#: appTools/ToolDblSided.py:696
msgid "Box"
msgstr "Box"

#: appGUI/preferences/tools/Tools2sidedPrefGroupUI.py:87
#: appTools/ToolDblSided.py:697
msgid "Hole Snap"
msgstr "Hole Snap"

#: appGUI/preferences/tools/Tools2sidedPrefGroupUI.py:90
msgid "Axis Ref"
msgstr "Axis Ref"

#: appGUI/preferences/tools/Tools2sidedPrefGroupUI.py:92
msgid ""
"The coordinates used as reference for the mirror operation.\n"
"Can be:\n"
"- Point -> a set of coordinates (x,y) around which the object is mirrored\n"
"- Box -> a set of coordinates (x, y) obtained from the center of the\n"
"bounding box of another object selected below\n"
"- Hole Snap-> a point defined by the center of a drill hone in a Excellon "
"object"
msgstr ""
"The coordinates used as reference for the mirror operation.\n"
"Can be:\n"
"- Point -> a set of coordinates (x,y) around which the object is mirrored\n"
"- Box -> a set of coordinates (x, y) obtained from the center of the\n"
"bounding box of another object selected below\n"
"- Hole Snap-> a point defined by the center of a drill hone in a Excellon "
"object"

#: appGUI/preferences/tools/ToolsCalculatorsPrefGroupUI.py:27
msgid "Calculators Tool Options"
msgstr "Calculators Tool Options"

#: appGUI/preferences/tools/ToolsCalculatorsPrefGroupUI.py:31
#: appTools/ToolCalculators.py:191
msgid "V-Shape Tool Calculator"
msgstr "V-Shape Tool Calculator"

#: appGUI/preferences/tools/ToolsCalculatorsPrefGroupUI.py:33
msgid ""
"Calculate the tool diameter for a given V-shape tool,\n"
"having the tip diameter, tip angle and\n"
"depth-of-cut as parameters."
msgstr ""
"Calculate the tool diameter for a given V-shape tool,\n"
"having the tip diameter, tip angle and\n"
"depth-of-cut as parameters."

#: appGUI/preferences/tools/ToolsCalculatorsPrefGroupUI.py:50
#: appTools/ToolCalculators.py:260
msgid "Tip Diameter"
msgstr "Tip Diameter"

#: appGUI/preferences/tools/ToolsCalculatorsPrefGroupUI.py:52
#: appTools/ToolCalculators.py:268
msgid ""
"This is the tool tip diameter.\n"
"It is specified by manufacturer."
msgstr ""
"This is the tool tip diameter.\n"
"It is specified by manufacturer."

#: appGUI/preferences/tools/ToolsCalculatorsPrefGroupUI.py:64
#: appTools/ToolCalculators.py:271
msgid "Tip Angle"
msgstr "Tip Angle"

#: appGUI/preferences/tools/ToolsCalculatorsPrefGroupUI.py:66
msgid ""
"This is the angle on the tip of the tool.\n"
"It is specified by manufacturer."
msgstr ""
"This is the angle on the tip of the tool.\n"
"It is specified by manufacturer."

#: appGUI/preferences/tools/ToolsCalculatorsPrefGroupUI.py:80
msgid ""
"This is depth to cut into material.\n"
"In the CNCJob object it is the CutZ parameter."
msgstr ""
"This is depth to cut into material.\n"
"In the CNCJob object it is the CutZ parameter."

#: appGUI/preferences/tools/ToolsCalculatorsPrefGroupUI.py:87
#: appTools/ToolCalculators.py:193
msgid "ElectroPlating Calculator"
msgstr "ElectroPlating Calculator"

#: appGUI/preferences/tools/ToolsCalculatorsPrefGroupUI.py:89
#: appTools/ToolCalculators.py:324
msgid ""
"This calculator is useful for those who plate the via/pad/drill holes,\n"
"using a method like graphite ink or calcium hypophosphite ink or palladium "
"chloride."
msgstr ""
"This calculator is useful for those who plate the via/pad/drill holes,\n"
"using a method like graphite ink or calcium hypophosphite ink or palladium "
"chloride."

#: appGUI/preferences/tools/ToolsCalculatorsPrefGroupUI.py:100
#: appTools/ToolCalculators.py:349
msgid "Board Length"
msgstr "Board Length"

#: appGUI/preferences/tools/ToolsCalculatorsPrefGroupUI.py:102
#: appTools/ToolCalculators.py:350
msgid "This is the board length. In centimeters."
msgstr "This is the board length. In centimeters."

#: appGUI/preferences/tools/ToolsCalculatorsPrefGroupUI.py:112
#: appTools/ToolCalculators.py:367
msgid "Board Width"
msgstr "Board Width"

#: appGUI/preferences/tools/ToolsCalculatorsPrefGroupUI.py:114
#: appTools/ToolCalculators.py:368
msgid "This is the board width.In centimeters."
msgstr "This is the board width.In centimeters."

#: appGUI/preferences/tools/ToolsCalculatorsPrefGroupUI.py:120
#: appTools/ToolCalculators.py:386
msgid "This is the board area."
msgstr "This is the board area."

#: appGUI/preferences/tools/ToolsCalculatorsPrefGroupUI.py:130
#: appTools/ToolCalculators.py:408
msgid "Current Density"
msgstr "Current Density"

#: appGUI/preferences/tools/ToolsCalculatorsPrefGroupUI.py:136
#: appTools/ToolCalculators.py:409
msgid ""
"Current density to pass through the board. \n"
"In Amps per Square Feet ASF."
msgstr ""
"Current density to pass through the board. \n"
"In Amps per Square Feet ASF."

#: appGUI/preferences/tools/ToolsCalculatorsPrefGroupUI.py:142
#: appTools/ToolCalculators.py:428
msgid "Copper Growth"
msgstr "Copper Growth"

#: appGUI/preferences/tools/ToolsCalculatorsPrefGroupUI.py:148
#: appTools/ToolCalculators.py:429
msgid ""
"How thick the copper growth is intended to be.\n"
"In microns."
msgstr ""
"How thick the copper growth is intended to be.\n"
"In microns."

#: appGUI/preferences/tools/ToolsCornersPrefGroupUI.py:27
msgid "Corner Markers Options"
msgstr "Corner Markers Options"

#: appGUI/preferences/tools/ToolsCornersPrefGroupUI.py:44
#: appTools/ToolCorners.py:548
msgid "Shape of the marker."
msgstr "Shape of the marker."

#: appGUI/preferences/tools/ToolsCornersPrefGroupUI.py:48
#: appTools/ToolCorners.py:552
msgid "Semi-Cross"
msgstr "Semi-Cross"

#: appGUI/preferences/tools/ToolsCornersPrefGroupUI.py:58
#: appTools/ToolCorners.py:562
msgid "The thickness of the line that makes the corner marker."
msgstr "The thickness of the line that makes the corner marker."

#: appGUI/preferences/tools/ToolsCornersPrefGroupUI.py:85
#: appTools/ToolCorners.py:576
msgid "The length of the line that makes the corner marker."
msgstr "The length of the line that makes the corner marker."

#: appGUI/preferences/tools/ToolsCornersPrefGroupUI.py:96
#: appTools/ToolCorners.py:628 appTools/ToolDblSided.py:827
msgid "Drill Dia"
msgstr "Drill Dia"

#: appGUI/preferences/tools/ToolsCornersPrefGroupUI.py:98
#: appTools/ToolCorners.py:630
msgid "Drill Diameter"
msgstr "Drill Diameter"

#: appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:28
msgid "Cutout Tool Options"
msgstr "Cutout Tool Options"

#: appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:34
msgid ""
"Create toolpaths to cut around\n"
"the PCB and separate it from\n"
"the original board."
msgstr ""
"Create toolpaths to cut around\n"
"the PCB and separate it from\n"
"the original board."

#: appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:45
#: appTools/ToolCutOut.py:2079
msgid ""
"Diameter of the tool used to cutout\n"
"the PCB shape out of the surrounding material."
msgstr ""
"Diameter of the tool used to cutout\n"
"the PCB shape out of the surrounding material."

#: appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:100
msgid "Object kind"
msgstr "Object kind"

#: appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:102
#: appTools/ToolCutOut.py:2012
msgid ""
"Choice of what kind the object we want to cutout is.<BR>- <B>Single</B>: "
"contain a single PCB Gerber outline object.<BR>- <B>Panel</B>: a panel PCB "
"Gerber object, which is made\n"
"out of many individual PCB outlines."
msgstr ""
"Choice of what kind the object we want to cutout is.<BR>- <B>Single</B>: "
"contain a single PCB Gerber outline object.<BR>- <B>Panel</B>: a panel PCB "
"Gerber object, which is made\n"
"out of many individual PCB outlines."

#: appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:109
#: appTools/ToolCutOut.py:2018
msgid "Single"
msgstr "Single"

#: appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:110
#: appTools/ToolCutOut.py:2019
msgid "Panel"
msgstr "Panel"

#: appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:211
msgid ""
"Number of gaps used for the cutout.\n"
"There can be maximum 8 bridges/gaps.\n"
"The choices are:\n"
"- None  - no gaps\n"
"- lr    - left + right\n"
"- tb    - top + bottom\n"
"- 4     - left + right +top + bottom\n"
"- 2lr   - 2*left + 2*right\n"
"- 2tb  - 2*top + 2*bottom\n"
"- 8     - 2*left + 2*right +2*top + 2*bottom"
msgstr ""
"Number of gaps used for the cutout.\n"
"There can be maximum 8 bridges/gaps.\n"
"The choices are:\n"
"- None  - no gaps\n"
"- lr    - left + right\n"
"- tb    - top + bottom\n"
"- 4     - left + right +top + bottom\n"
"- 2lr   - 2*left + 2*right\n"
"- 2tb  - 2*top + 2*bottom\n"
"- 8     - 2*left + 2*right +2*top + 2*bottom"

#: appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:240
#: appTools/ToolCutOut.py:2350
msgid "Big cursor"
msgstr "Big cursor"

#: appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:242
#: appTools/ToolCutOut.py:2352
msgid "Use a big cursor when adding manual gaps."
msgstr "Use a big cursor when adding manual gaps."

#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:27
msgid "Drilling Tool Options"
msgstr "Drilling Tool Options"

#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:33
#: appTools/ToolDrilling.py:2006 appTools/ToolMilling.py:1611
msgid "Create CNCJob with toolpaths for drilling or milling holes."
msgstr "Create CNCJob with toolpaths for drilling or milling holes."

#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:41
#: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:54
#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:156
#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:140
#: appTools/ToolDrilling.py:2082 appTools/ToolIsolation.py:3163
#: appTools/ToolMilling.py:1687 appTools/ToolNCC.py:4040
#: appTools/ToolPaint.py:2861
msgid "Tool order"
msgstr "Tool order"

#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:42
#: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:55
#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:157
#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:167
#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:141
#: appTools/ToolDrilling.py:2083 appTools/ToolIsolation.py:3164
#: appTools/ToolMilling.py:1688 appTools/ToolNCC.py:4041
#: appTools/ToolNCC.py:4051 appTools/ToolPaint.py:2862
#: appTools/ToolPaint.py:2872
msgid ""
"This set the way that the tools in the tools table are used.\n"
"'No' --> means that the used order is the one in the tool table\n"
"'Forward' --> means that the tools will be ordered from small to big\n"
"'Reverse' --> means that the tools will ordered from big to small\n"
"\n"
"WARNING: using rest machining will automatically set the order\n"
"in reverse and disable this control."
msgstr ""
"This set the way that the tools in the tools table are used.\n"
"'No' --> means that the used order is the one in the tool table\n"
"'Forward' --> means that the tools will be ordered from small to big\n"
"'Reverse' --> means that the tools will ordered from big to small\n"
"\n"
"WARNING: using rest machining will automatically set the order\n"
"in reverse and disable this control."

#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:50
#: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:63
#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:165
#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:149
#: appTools/ToolDrilling.py:2091 appTools/ToolIsolation.py:3172
#: appTools/ToolMilling.py:1696 appTools/ToolNCC.py:4049
#: appTools/ToolPaint.py:2870
msgid "Forward"
msgstr "Forward"

#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:51
#: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:64
#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:166
#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:150
#: appTools/ToolDrilling.py:2092 appTools/ToolIsolation.py:3173
#: appTools/ToolMilling.py:1697 appTools/ToolNCC.py:4050
#: appTools/ToolPaint.py:2871
msgid "Reverse"
msgstr "Reverse"

#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:118
#: appTools/ToolDrilling.py:2387 appTools/ToolMilling.py:2065
msgid ""
"Include tool-change sequence\n"
"in G-Code (Pause for tool change)."
msgstr ""
"Include tool-change sequence\n"
"in G-Code (Pause for tool change)."

#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:223
msgid ""
"The preprocessor JSON file that dictates\n"
"Gcode output."
msgstr ""
"The preprocessor JSON file that dictates\n"
"Gcode output."

#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:240
msgid "Drilling Slots"
msgstr "Drilling Slots"

#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:279
msgid "A list of advanced parameters."
msgstr "A list of advanced parameters."

#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:297
msgid "Toolchange X,Y"
msgstr "Toolchange X,Y"

#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:309
#: appTools/ToolDrilling.py:2417 appTools/ToolMilling.py:2089
msgid ""
"Height of the tool just after start.\n"
"Delete the value if you don't need this feature."
msgstr ""
"Height of the tool just after start.\n"
"Delete the value if you don't need this feature."

#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:381
msgid "Fast Retract"
msgstr "Fast Retract"

#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:383
msgid ""
"Exit hole strategy.\n"
" - When uncheked, while exiting the drilled hole the drill bit\n"
"will travel slow, with set feedrate (G1), up to zero depth and then\n"
"travel as fast as possible (G0) to the Z Move (travel height).\n"
" - When checked the travel from Z cut (cut depth) to Z_move\n"
"(travel height) is done as fast as possible (G0) in one move."
msgstr ""
"Exit hole strategy.\n"
" - When uncheked, while exiting the drilled hole the drill bit\n"
"will travel slow, with set feedrate (G1), up to zero depth and then\n"
"travel as fast as possible (G0) to the Z Move (travel height).\n"
" - When checked the travel from Z cut (cut depth) to Z_move\n"
"(travel height) is done as fast as possible (G0) in one move."

#: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:27
msgid "Film Tool Options"
msgstr "Film Tool Options"

#: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:33
msgid ""
"Create a PCB film from a Gerber or Geometry object.\n"
"The file is saved in SVG format."
msgstr ""
"Create a PCB film from a Gerber or Geometry object.\n"
"The file is saved in SVG format."

#: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:43
msgid "Film Type"
msgstr "Film Type"

#: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:45
#: appTools/ToolFilm.py:1152
msgid ""
"Generate a Positive black film or a Negative film.\n"
"Positive means that it will print the features\n"
"with black on a white canvas.\n"
"Negative means that it will print the features\n"
"with white on a black canvas.\n"
"The Film format is SVG."
msgstr ""
"Generate a Positive black film or a Negative film.\n"
"Positive means that it will print the features\n"
"with black on a white canvas.\n"
"Negative means that it will print the features\n"
"with white on a black canvas.\n"
"The Film format is SVG."

#: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:56
msgid "Film Color"
msgstr "Film Color"

#: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:58
msgid "Set the film color when positive film is selected."
msgstr "Set the film color when positive film is selected."

#: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:71
#: appTools/ToolFilm.py:1168
msgid "Border"
msgstr "Border"

#: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:73
#: appTools/ToolFilm.py:1170
msgid ""
"Specify a border around the object.\n"
"Only for negative film.\n"
"It helps if we use as a Box Object the same \n"
"object as in Film Object. It will create a thick\n"
"black bar around the actual print allowing for a\n"
"better delimitation of the outline features which are of\n"
"white color like the rest and which may confound with the\n"
"surroundings if not for this border."
msgstr ""
"Specify a border around the object.\n"
"Only for negative film.\n"
"It helps if we use as a Box Object the same \n"
"object as in Film Object. It will create a thick\n"
"black bar around the actual print allowing for a\n"
"better delimitation of the outline features which are of\n"
"white color like the rest and which may confound with the\n"
"surroundings if not for this border."

#: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:90
#: appTools/ToolFilm.py:1137
msgid "Scale Stroke"
msgstr "Scale Stroke"

#: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:92
#: appTools/ToolFilm.py:1139
msgid ""
"Scale the line stroke thickness of each feature in the SVG file.\n"
"It means that the line that envelope each SVG feature will be thicker or "
"thinner,\n"
"therefore the fine features may be more affected by this parameter."
msgstr ""
"Scale the line stroke thickness of each feature in the SVG file.\n"
"It means that the line that envelope each SVG feature will be thicker or "
"thinner,\n"
"therefore the fine features may be more affected by this parameter."

#: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:99 appTools/ToolFilm.py:981
msgid "Film Adjustments"
msgstr "Film Adjustments"

#: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:101
#: appTools/ToolFilm.py:983
msgid ""
"Sometime the printers will distort the print shape, especially the Laser "
"types.\n"
"This section provide the tools to compensate for the print distortions."
msgstr ""
"Sometime the printers will distort the print shape, especially the Laser "
"types.\n"
"This section provide the tools to compensate for the print distortions."

#: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:108
#: appTools/ToolFilm.py:990
msgid "Scale Film geometry"
msgstr "Scale Film geometry"

#: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:110
#: appTools/ToolFilm.py:992
msgid ""
"A value greater than 1 will stretch the film\n"
"while a value less than 1 will jolt it."
msgstr ""
"A value greater than 1 will stretch the film\n"
"while a value less than 1 will jolt it."

#: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:139
#: appTools/ToolFilm.py:1034
msgid "Skew Film geometry"
msgstr "Skew Film geometry"

#: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:141
#: appTools/ToolFilm.py:1036
msgid ""
"Positive values will skew to the right\n"
"while negative values will skew to the left."
msgstr ""
"Positive values will skew to the right\n"
"while negative values will skew to the left."

#: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:171
#: appTools/ToolFilm.py:1066
msgid ""
"The reference point to be used as origin for the skew.\n"
"It can be one of the four points of the geometry bounding box."
msgstr ""
"The reference point to be used as origin for the skew.\n"
"It can be one of the four points of the geometry bounding box."

#: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:174
#: appTools/ToolCorners.py:512 appTools/ToolFiducials.py:723
#: appTools/ToolFilm.py:1069
msgid "Bottom Left"
msgstr "Bottom Left"

#: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:175
#: appTools/ToolCorners.py:504 appTools/ToolFilm.py:1070
msgid "Top Left"
msgstr "Top Left"

#: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:176
#: appTools/ToolCorners.py:516 appTools/ToolFilm.py:1071
msgid "Bottom Right"
msgstr "Bottom Right"

#: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:177
#: appTools/ToolFilm.py:1072
msgid "Top right"
msgstr "Top right"

#: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:185
#: appTools/ToolFilm.py:1095
msgid "Mirror Film geometry"
msgstr "Mirror Film geometry"

#: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:187
#: appTools/ToolFilm.py:1097
msgid "Mirror the film geometry on the selected axis or on both."
msgstr "Mirror the film geometry on the selected axis or on both."

#: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:201
#: appTools/ToolFilm.py:1111
msgid "Mirror axis"
msgstr "Mirror axis"

#: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:211
#: appTools/ToolFilm.py:1257
msgid "SVG"
msgstr "SVG"

#: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:212
#: appTools/ToolFilm.py:1258
msgid "PNG"
msgstr "PNG"

#: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:213
#: appTools/ToolFilm.py:1259
msgid "PDF"
msgstr "PDF"

#: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:216
#: appTools/ToolFilm.py:1150 appTools/ToolFilm.py:1262
msgid "Film Type:"
msgstr "Film Type:"

#: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:218
#: appTools/ToolFilm.py:1264
msgid ""
"The file type of the saved film. Can be:\n"
"- 'SVG' -> open-source vectorial format\n"
"- 'PNG' -> raster image\n"
"- 'PDF' -> portable document format"
msgstr ""
"The file type of the saved film. Can be:\n"
"- 'SVG' -> open-source vectorial format\n"
"- 'PNG' -> raster image\n"
"- 'PDF' -> portable document format"

#: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:227
#: appTools/ToolFilm.py:1273
msgid "Page Orientation"
msgstr "Page Orientation"

#: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:240
#: appTools/ToolFilm.py:1286
msgid "Page Size"
msgstr "Page Size"

#: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:241
#: appTools/ToolFilm.py:1287
msgid "A selection of standard ISO 216 page sizes."
msgstr "A selection of standard ISO 216 page sizes."

#: appGUI/preferences/tools/ToolsFilmPrefGroupUI.py:308
#: appTools/ToolFilm.py:1356
msgid "Default value is 96 DPI. Change this value to scale the PNG file."
msgstr "Default value is 96 DPI. Change this value to scale the PNG file."

#: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:26
msgid "Isolation Tool Options"
msgstr "Isolation Tool Options"

#: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:48
#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:49
#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:55
msgid "Comma separated values"
msgstr "Comma separated values"

#: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:72
#: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:80
#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:55
#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:63
#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:62
msgid ""
"Default tool type:\n"
"- 'V-shape'\n"
"- Circular"
msgstr ""
"Default tool type:\n"
"- 'V-shape'\n"
"- Circular"

#: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:77
#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:60
#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:67
msgid "V-shape"
msgstr "V-shape"

#: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:103
msgid ""
"The tip angle for V-Shape Tool.\n"
"In degrees."
msgstr ""
"The tip angle for V-Shape Tool.\n"
"In degrees."

#: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:117
#: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:126
#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:100
#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:109
msgid ""
"Depth of cut into material. Negative value.\n"
"In FlatCAM units."
msgstr ""
"Depth of cut into material. Negative value.\n"
"In FlatCAM units."

#: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:136
#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:119
#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:123
#: appTools/ToolPaint.py:2902
msgid ""
"Diameter for the new tool to add in the Tool Table.\n"
"If the tool is V-shape type then this value is automatically\n"
"calculated from the other parameters."
msgstr ""
"Diameter for the new tool to add in the Tool Table.\n"
"If the tool is V-shape type then this value is automatically\n"
"calculated from the other parameters."

#: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:243
#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:288
#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:242
#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:243
#: appTools/ToolIsolation.py:3391 appTools/ToolNCC.py:4335
#: appTools/ToolPaint.py:3076
msgid "Rest"
msgstr "Rest"

#: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:246
#: appTools/ToolIsolation.py:3394
msgid ""
"If checked, use 'rest machining'.\n"
"Basically it will isolate outside PCB features,\n"
"using the biggest tool and continue with the next tools,\n"
"from bigger to smaller, to isolate the copper features that\n"
"could not be cleared by previous tool, until there is\n"
"no more copper features to isolate or there are no more tools.\n"
"If not checked, use the standard algorithm."
msgstr ""
"If checked, use 'rest machining'.\n"
"Basically it will isolate outside PCB features,\n"
"using the biggest tool and continue with the next tools,\n"
"from bigger to smaller, to isolate the copper features that\n"
"could not be cleared by previous tool, until there is\n"
"no more copper features to isolate or there are no more tools.\n"
"If not checked, use the standard algorithm."

#: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:258
#: appTools/ToolIsolation.py:3416
msgid "Combine"
msgstr "Combine"

#: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:260
#: appTools/ToolIsolation.py:3418
msgid "Combine all passes into one object"
msgstr "Combine all passes into one object"

#: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:267
#: appTools/ToolIsolation.py:3435
msgid "Except"
msgstr "Except"

#: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:268
#: appTools/ToolIsolation.py:3436
msgid ""
"When the isolation geometry is generated,\n"
"by checking this, the area of the object below\n"
"will be subtracted from the isolation geometry."
msgstr ""
"When the isolation geometry is generated,\n"
"by checking this, the area of the object below\n"
"will be subtracted from the isolation geometry."

#: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:275
#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:350
#: appTools/ToolIsolation.py:3425 appTools/ToolNCC.py:4466
msgid "Check validity"
msgstr "Check validity"

#: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:277
#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:352
#: appTools/ToolIsolation.py:3427 appTools/ToolNCC.py:4468
msgid ""
"If checked then the tools diameters are verified\n"
"if they will provide a complete isolation."
msgstr ""
"If checked then the tools diameters are verified\n"
"if they will provide a complete isolation."

#: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:287
#: appTools/ToolIsolation.py:3475
msgid ""
"Isolation scope. Choose what to isolate:\n"
"- 'All' -> Isolate all the polygons in the object\n"
"- 'Area Selection' -> Isolate polygons within a selection area.\n"
"- 'Polygon Selection' -> Isolate a selection of polygons.\n"
"- 'Reference Object' - will process the area specified by another object."
msgstr ""
"Isolation scope. Choose what to isolate:\n"
"- 'All' -> Isolate all the polygons in the object\n"
"- 'Area Selection' -> Isolate polygons within a selection area.\n"
"- 'Polygon Selection' -> Isolate a selection of polygons.\n"
"- 'Reference Object' - will process the area specified by another object."

#: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:295
#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:278
#: appTools/ToolIsolation.py:3483 appTools/ToolPaint.py:3116
#: tclCommands/TclCommandPaint.py:164
msgid "Polygon Selection"
msgstr "Polygon Selection"

#: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:315
#: appTools/ToolIsolation.py:3519
msgid "Interiors"
msgstr "Interiors"

#: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:317
#: appTools/ToolIsolation.py:3521
msgid ""
"When checked the user can select interiors of a polygon.\n"
"(holes in the polygon)."
msgstr ""
"When checked the user can select interiors of a polygon.\n"
"(holes in the polygon)."

#: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:322
#: appTools/ToolIsolation.py:3406
msgid "Forced Rest"
msgstr "Forced Rest"

#: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:324
#: appTools/ToolIsolation.py:3408
msgid ""
"When checked the isolation will be done with the current tool even if\n"
"interiors of a polygon (holes in the polygon) could not be isolated.\n"
"Works when 'rest machining' is used."
msgstr ""
"When checked the isolation will be done with the current tool even if\n"
"interiors of a polygon (holes in the polygon) could not be isolated.\n"
"Works when 'rest machining' is used."

#: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:337
#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:339
#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:301
msgid "Normal"
msgstr "Normal"

#: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:338
#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:340
#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:302
msgid "Progressive"
msgstr "Progressive"

#: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:341
#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:343
#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:305
msgid ""
"- 'Normal' -  normal plotting, done at the end of the job\n"
"- 'Progressive' - each shape is plotted after it is generated"
msgstr ""
"- 'Normal' -  normal plotting, done at the end of the job\n"
"- 'Progressive' - each shape is plotted after it is generated"

#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:27
msgid "NCC Tool Options"
msgstr "NCC Tool Options"

#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:33
msgid ""
"Create a Geometry object with\n"
"toolpaths to cut all non-copper regions."
msgstr ""
"Create a Geometry object with\n"
"toolpaths to cut all non-copper regions."

#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:266
msgid "Offset value"
msgstr "Offset value"

#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:268
msgid ""
"If used, it will add an offset to the copper features.\n"
"The copper clearing will finish to a distance\n"
"from the copper features.\n"
"The value can be between 0.0 and 9999.9 FlatCAM units."
msgstr ""
"If used, it will add an offset to the copper features.\n"
"The copper clearing will finish to a distance\n"
"from the copper features.\n"
"The value can be between 0.0 and 9999.9 FlatCAM units."

#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:290 appTools/ToolNCC.py:4339
msgid ""
"If checked, use 'rest machining'.\n"
"Basically it will clear copper outside PCB features,\n"
"using the biggest tool and continue with the next tools,\n"
"from bigger to smaller, to clear areas of copper that\n"
"could not be cleared by previous tool, until there is\n"
"no more copper to clear or there are no more tools.\n"
"If not checked, use the standard algorithm."
msgstr ""
"If checked, use 'rest machining'.\n"
"Basically it will clear copper outside PCB features,\n"
"using the biggest tool and continue with the next tools,\n"
"from bigger to smaller, to clear areas of copper that\n"
"could not be cleared by previous tool, until there is\n"
"no more copper to clear or there are no more tools.\n"
"If not checked, use the standard algorithm."

#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:313 appTools/ToolNCC.py:4414
msgid ""
"Selection of area to be processed.\n"
"- 'Itself' - the processing extent is based on the object that is "
"processed.\n"
" - 'Area Selection' - left mouse click to start selection of the area to be "
"processed.\n"
"- 'Reference Object' - will process the area specified by another object."
msgstr ""
"Selection of area to be processed.\n"
"- 'Itself' - the processing extent is based on the object that is "
"processed.\n"
" - 'Area Selection' - left mouse click to start selection of the area to be "
"processed.\n"
"- 'Reference Object' - will process the area specified by another object."

#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:27
msgid "Paint Tool Options"
msgstr "Paint Tool Options"

#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:105
#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:114
msgid ""
"Depth of cut into material. Negative value.\n"
"In application units."
msgstr ""
"Depth of cut into material. Negative value.\n"
"In application units."

#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:245
#: appTools/ToolPaint.py:3079
msgid ""
"If checked, use 'rest machining'.\n"
"Basically it will clear copper outside PCB features,\n"
"using the biggest tool and continue with the next tools,\n"
"from bigger to smaller, to clear areas of copper that\n"
"could not be cleared by previous tool, until there is\n"
"no more copper to clear or there are no more tools.\n"
"\n"
"If not checked, use the standard algorithm."
msgstr ""
"If checked, use 'rest machining'.\n"
"Basically it will clear copper outside PCB features,\n"
"using the biggest tool and continue with the next tools,\n"
"from bigger to smaller, to clear areas of copper that\n"
"could not be cleared by previous tool, until there is\n"
"no more copper to clear or there are no more tools.\n"
"\n"
"If not checked, use the standard algorithm."

#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:258
#: appTools/ToolPaint.py:3106
msgid ""
"Selection of area to be processed.\n"
"- 'Polygon Selection' - left mouse click to add/remove polygons to be "
"processed.\n"
"- 'Area Selection' - left mouse click to start selection of the area to be "
"processed.\n"
"Keeping a modifier key pressed (CTRL or SHIFT) will allow to add multiple "
"areas.\n"
"- 'All Polygons' - the process will start after click.\n"
"- 'Reference Object' - will process the area specified by another object."
msgstr ""
"Selection of area to be processed.\n"
"- 'Polygon Selection' - left mouse click to add/remove polygons to be "
"processed.\n"
"- 'Area Selection' - left mouse click to start selection of the area to be "
"processed.\n"
"Keeping a modifier key pressed (CTRL or SHIFT) will allow to add multiple "
"areas.\n"
"- 'All Polygons' - the process will start after click.\n"
"- 'Reference Object' - will process the area specified by another object."

#: appGUI/preferences/tools/ToolsPanelizePrefGroupUI.py:27
msgid "Panelize Tool Options"
msgstr "Panelize Tool Options"

#: appGUI/preferences/tools/ToolsPanelizePrefGroupUI.py:33
msgid ""
"Create an object that contains an array of (x, y) elements,\n"
"each element is a copy of the source object spaced\n"
"at a X distance, Y distance of each other."
msgstr ""
"Create an object that contains an array of (x, y) elements,\n"
"each element is a copy of the source object spaced\n"
"at a X distance, Y distance of each other."

#: appGUI/preferences/tools/ToolsPanelizePrefGroupUI.py:50
#: appTools/ToolPanelize.py:765
msgid "Spacing cols"
msgstr "Spacing cols"

#: appGUI/preferences/tools/ToolsPanelizePrefGroupUI.py:52
#: appTools/ToolPanelize.py:767
msgid ""
"Spacing between columns of the desired panel.\n"
"In current units."
msgstr ""
"Spacing between columns of the desired panel.\n"
"In current units."

#: appGUI/preferences/tools/ToolsPanelizePrefGroupUI.py:64
#: appTools/ToolPanelize.py:777
msgid "Spacing rows"
msgstr "Spacing rows"

#: appGUI/preferences/tools/ToolsPanelizePrefGroupUI.py:66
#: appTools/ToolPanelize.py:779
msgid ""
"Spacing between rows of the desired panel.\n"
"In current units."
msgstr ""
"Spacing between rows of the desired panel.\n"
"In current units."

#: appGUI/preferences/tools/ToolsPanelizePrefGroupUI.py:79
#: appTools/ToolPanelize.py:790
msgid "Number of columns of the desired panel"
msgstr "Number of columns of the desired panel"

#: appGUI/preferences/tools/ToolsPanelizePrefGroupUI.py:91
#: appTools/ToolPanelize.py:800
msgid "Number of rows of the desired panel"
msgstr "Number of rows of the desired panel"

#: appGUI/preferences/tools/ToolsPanelizePrefGroupUI.py:98
#: appTools/ToolPanelize.py:811
msgid "Geo"
msgstr "Geo"

#: appGUI/preferences/tools/ToolsPanelizePrefGroupUI.py:99
#: appTools/ToolPanelize.py:812
msgid "Panel Type"
msgstr "Panel Type"

#: appGUI/preferences/tools/ToolsPanelizePrefGroupUI.py:101
msgid ""
"Choose the type of object for the panel object:\n"
"- Gerber\n"
"- Geometry"
msgstr ""
"Choose the type of object for the panel object:\n"
"- Gerber\n"
"- Geometry"

#: appGUI/preferences/tools/ToolsPanelizePrefGroupUI.py:112
#: appTools/ToolPanelize.py:824
msgid ""
"Active only for Geometry panel type.\n"
"When checked the application will find\n"
"any two overlapping Line elements in the panel\n"
"and will remove the overlapping parts, keeping only one of them."
msgstr ""
"Active only for Geometry panel type.\n"
"When checked the application will find\n"
"any two overlapping Line elements in the panel\n"
"and will remove the overlapping parts, keeping only one of them."

#: appGUI/preferences/tools/ToolsPanelizePrefGroupUI.py:120
msgid "Constrain within"
msgstr "Constrain within"

#: appGUI/preferences/tools/ToolsPanelizePrefGroupUI.py:122
#: appTools/ToolPanelize.py:834
msgid ""
"Area define by DX and DY within to constrain the panel.\n"
"DX and DY values are in current units.\n"
"Regardless of how many columns and rows are desired,\n"
"the final panel will have as many columns and rows as\n"
"they fit completely within selected area."
msgstr ""
"Area define by DX and DY within to constrain the panel.\n"
"DX and DY values are in current units.\n"
"Regardless of how many columns and rows are desired,\n"
"the final panel will have as many columns and rows as\n"
"they fit completely within selected area."

#: appGUI/preferences/tools/ToolsPanelizePrefGroupUI.py:135
#: appTools/ToolPanelize.py:846
msgid "Width (DX)"
msgstr "Width (DX)"

#: appGUI/preferences/tools/ToolsPanelizePrefGroupUI.py:137
#: appTools/ToolPanelize.py:848
msgid ""
"The width (DX) within which the panel must fit.\n"
"In current units."
msgstr ""
"The width (DX) within which the panel must fit.\n"
"In current units."

#: appGUI/preferences/tools/ToolsPanelizePrefGroupUI.py:148
#: appTools/ToolPanelize.py:857
msgid "Height (DY)"
msgstr "Height (DY)"

#: appGUI/preferences/tools/ToolsPanelizePrefGroupUI.py:150
#: appTools/ToolPanelize.py:859
msgid ""
"The height (DY)within which the panel must fit.\n"
"In current units."
msgstr ""
"The height (DY)within which the panel must fit.\n"
"In current units."

#: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:27
msgid "SolderPaste Tool Options"
msgstr "SolderPaste Tool Options"

#: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:33
msgid ""
"A tool to create GCode for dispensing\n"
"solder paste onto a PCB."
msgstr ""
"A tool to create GCode for dispensing\n"
"solder paste onto a PCB."

#: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:54
msgid "New Nozzle Dia"
msgstr "New Nozzle Dia"

#: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:56
#: appTools/ToolSolderPaste.py:1189
msgid "Diameter for the new Nozzle tool to add in the Tool Table"
msgstr "Diameter for the new Nozzle tool to add in the Tool Table"

#: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:72
#: appTools/ToolSolderPaste.py:1256
msgid "Z Dispense Start"
msgstr "Z Dispense Start"

#: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:74
#: appTools/ToolSolderPaste.py:1258
msgid "The height (Z) when solder paste dispensing starts."
msgstr "The height (Z) when solder paste dispensing starts."

#: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:85
#: appTools/ToolSolderPaste.py:1268
msgid "Z Dispense"
msgstr "Z Dispense"

#: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:87
#: appTools/ToolSolderPaste.py:1270
msgid "The height (Z) when doing solder paste dispensing."
msgstr "The height (Z) when doing solder paste dispensing."

#: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:98
#: appTools/ToolSolderPaste.py:1280
msgid "Z Dispense Stop"
msgstr "Z Dispense Stop"

#: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:100
#: appTools/ToolSolderPaste.py:1282
msgid "The height (Z) when solder paste dispensing stops."
msgstr "The height (Z) when solder paste dispensing stops."

#: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:111
#: appTools/ToolSolderPaste.py:1292
msgid "Z Travel"
msgstr "Z Travel"

#: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:113
#: appTools/ToolSolderPaste.py:1294
msgid ""
"The height (Z) for travel between pads\n"
"(without dispensing solder paste)."
msgstr ""
"The height (Z) for travel between pads\n"
"(without dispensing solder paste)."

#: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:125
#: appTools/ToolSolderPaste.py:1305
msgid "Z Toolchange"
msgstr "Z Toolchange"

#: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:127
#: appTools/ToolSolderPaste.py:1307
msgid "The height (Z) for tool (nozzle) change."
msgstr "The height (Z) for tool (nozzle) change."

#: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:136
#: appTools/ToolSolderPaste.py:1315
msgid ""
"The X,Y location for tool (nozzle) change.\n"
"The format is (x, y) where x and y are real numbers."
msgstr ""
"The X,Y location for tool (nozzle) change.\n"
"The format is (x, y) where x and y are real numbers."

#: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:150
#: appTools/ToolSolderPaste.py:1328
msgid "Feedrate (speed) while moving on the X-Y plane."
msgstr "Feedrate (speed) while moving on the X-Y plane."

#: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:163
#: appTools/ToolSolderPaste.py:1340
msgid ""
"Feedrate (speed) while moving vertically\n"
"(on Z plane)."
msgstr ""
"Feedrate (speed) while moving vertically\n"
"(on Z plane)."

#: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:175
#: appTools/ToolSolderPaste.py:1351
msgid "Feedrate Z Dispense"
msgstr "Feedrate Z Dispense"

#: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:177
msgid ""
"Feedrate (speed) while moving up vertically\n"
"to Dispense position (on Z plane)."
msgstr ""
"Feedrate (speed) while moving up vertically\n"
"to Dispense position (on Z plane)."

#: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:188
#: appTools/ToolSolderPaste.py:1363
msgid "Spindle Speed FWD"
msgstr "Spindle Speed FWD"

#: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:190
#: appTools/ToolSolderPaste.py:1365
msgid ""
"The dispenser speed while pushing solder paste\n"
"through the dispenser nozzle."
msgstr ""
"The dispenser speed while pushing solder paste\n"
"through the dispenser nozzle."

#: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:202
#: appTools/ToolSolderPaste.py:1376
msgid "Dwell FWD"
msgstr "Dwell FWD"

#: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:204
#: appTools/ToolSolderPaste.py:1378
msgid "Pause after solder dispensing."
msgstr "Pause after solder dispensing."

#: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:214
#: appTools/ToolSolderPaste.py:1387
msgid "Spindle Speed REV"
msgstr "Spindle Speed REV"

#: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:216
#: appTools/ToolSolderPaste.py:1389
msgid ""
"The dispenser speed while retracting solder paste\n"
"through the dispenser nozzle."
msgstr ""
"The dispenser speed while retracting solder paste\n"
"through the dispenser nozzle."

#: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:228
#: appTools/ToolSolderPaste.py:1400
msgid "Dwell REV"
msgstr "Dwell REV"

#: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:230
#: appTools/ToolSolderPaste.py:1402
msgid ""
"Pause after solder paste dispenser retracted,\n"
"to allow pressure equilibrium."
msgstr ""
"Pause after solder paste dispenser retracted,\n"
"to allow pressure equilibrium."

#: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:239
#: appTools/ToolSolderPaste.py:1410
msgid "Files that control the GCode generation."
msgstr "Files that control the GCode generation."

#: appGUI/preferences/tools/ToolsSubPrefGroupUI.py:27
msgid "Substractor Tool Options"
msgstr "Substractor Tool Options"

#: appGUI/preferences/tools/ToolsSubPrefGroupUI.py:33
msgid ""
"A tool to substract one Gerber or Geometry object\n"
"from another of the same type."
msgstr ""
"A tool to substract one Gerber or Geometry object\n"
"from another of the same type."

#: appGUI/preferences/tools/ToolsSubPrefGroupUI.py:38 appTools/ToolSub.py:783
msgid "Close paths"
msgstr "Close paths"

#: appGUI/preferences/tools/ToolsSubPrefGroupUI.py:39
msgid ""
"Checking this will close the paths cut by the Geometry substractor object."
msgstr ""
"Checking this will close the paths cut by the Geometry substractor object."

#: appGUI/preferences/tools/ToolsSubPrefGroupUI.py:42 appTools/ToolSub.py:680
msgid "Delete source"
msgstr "Delete source"

#: appGUI/preferences/tools/ToolsSubPrefGroupUI.py:44 appTools/ToolSub.py:682
msgid ""
"When checked will delete the source objects\n"
"after a successful operation."
msgstr ""
"When checked will delete the source objects\n"
"after a successful operation."

#: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:27
msgid "Transform Tool Options"
msgstr "Transform Tool Options"

#: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:33
msgid ""
"Various transformations that can be applied\n"
"on a application object."
msgstr ""
"Various transformations that can be applied\n"
"on a application object."

#: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:46
#: appTools/ToolTransform.py:549
msgid ""
"The reference point for Rotate, Skew, Scale, Mirror.\n"
"Can be:\n"
"- Origin -> it is the 0, 0 point\n"
"- Selection -> the center of the bounding box of the selected objects\n"
"- Point -> a custom point defined by X,Y coordinates\n"
"- Object -> the center of the bounding box of a specific object"
msgstr ""
"The reference point for Rotate, Skew, Scale, Mirror.\n"
"Can be:\n"
"- Origin -> it is the 0, 0 point\n"
"- Selection -> the center of the bounding box of the selected objects\n"
"- Point -> a custom point defined by X,Y coordinates\n"
"- Object -> the center of the bounding box of a specific object"

#: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:72
#: appTools/ToolTransform.py:581
msgid "The type of object used as reference."
msgstr "The type of object used as reference."

#: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:107
msgid "Skew"
msgstr "Skew"

#: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:126
#: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:140
#: appTools/ToolCalibration.py:1200 appTools/ToolCalibration.py:1213
msgid ""
"Angle for Skew action, in degrees.\n"
"Float number between -360 and 359."
msgstr ""
"Angle for Skew action, in degrees.\n"
"Float number between -360 and 359."

#: appGUI/preferences/utilities/AutoCompletePrefGroupUI.py:27
msgid "Autocompleter Keywords"
msgstr "Autocompleter Keywords"

#: appGUI/preferences/utilities/AutoCompletePrefGroupUI.py:30
#: appGUI/preferences/utilities/FAExcPrefGroupUI.py:40
#: appGUI/preferences/utilities/FAGcoPrefGroupUI.py:30
#: appGUI/preferences/utilities/FAGrbPrefGroupUI.py:30
msgid "Restore"
msgstr "Restore"

#: appGUI/preferences/utilities/AutoCompletePrefGroupUI.py:31
msgid "Restore the autocompleter keywords list to the default state."
msgstr "Restore the autocompleter keywords list to the default state."

#: appGUI/preferences/utilities/AutoCompletePrefGroupUI.py:33
msgid "Delete all autocompleter keywords from the list."
msgstr "Delete all autocompleter keywords from the list."

#: appGUI/preferences/utilities/AutoCompletePrefGroupUI.py:41
msgid "Keywords list"
msgstr "Keywords list"

#: appGUI/preferences/utilities/AutoCompletePrefGroupUI.py:43
msgid ""
"List of keywords used by\n"
"the autocompleter in FlatCAM.\n"
"The autocompleter is installed\n"
"in the Code Editor and for the Tcl Shell."
msgstr ""
"List of keywords used by\n"
"the autocompleter in FlatCAM.\n"
"The autocompleter is installed\n"
"in the Code Editor and for the Tcl Shell."

#: appGUI/preferences/utilities/AutoCompletePrefGroupUI.py:64
#: appGUI/preferences/utilities/FAExcPrefGroupUI.py:73
#: appGUI/preferences/utilities/FAGcoPrefGroupUI.py:63
#: appGUI/preferences/utilities/FAGrbPrefGroupUI.py:62
msgid "Extension"
msgstr "Extension"

#: appGUI/preferences/utilities/AutoCompletePrefGroupUI.py:65
msgid "A keyword to be added or deleted to the list."
msgstr "A keyword to be added or deleted to the list."

#: appGUI/preferences/utilities/AutoCompletePrefGroupUI.py:73
msgid "Add keyword"
msgstr "Add keyword"

#: appGUI/preferences/utilities/AutoCompletePrefGroupUI.py:74
msgid "Add a keyword to the list"
msgstr "Add a keyword to the list"

#: appGUI/preferences/utilities/AutoCompletePrefGroupUI.py:75
msgid "Delete keyword"
msgstr "Delete keyword"

#: appGUI/preferences/utilities/AutoCompletePrefGroupUI.py:76
msgid "Delete a keyword from the list"
msgstr "Delete a keyword from the list"

#: appGUI/preferences/utilities/FAExcPrefGroupUI.py:27
msgid "Excellon File associations"
msgstr "Excellon File associations"

#: appGUI/preferences/utilities/FAExcPrefGroupUI.py:41
#: appGUI/preferences/utilities/FAGcoPrefGroupUI.py:31
#: appGUI/preferences/utilities/FAGrbPrefGroupUI.py:31
msgid "Restore the extension list to the default state."
msgstr "Restore the extension list to the default state."

#: appGUI/preferences/utilities/FAExcPrefGroupUI.py:43
#: appGUI/preferences/utilities/FAGcoPrefGroupUI.py:33
#: appGUI/preferences/utilities/FAGrbPrefGroupUI.py:33
msgid "Delete all extensions from the list."
msgstr "Delete all extensions from the list."

#: appGUI/preferences/utilities/FAExcPrefGroupUI.py:51
#: appGUI/preferences/utilities/FAGcoPrefGroupUI.py:41
#: appGUI/preferences/utilities/FAGrbPrefGroupUI.py:41
msgid "Extensions list"
msgstr "Extensions list"

#: appGUI/preferences/utilities/FAExcPrefGroupUI.py:53
#: appGUI/preferences/utilities/FAGcoPrefGroupUI.py:43
#: appGUI/preferences/utilities/FAGrbPrefGroupUI.py:43
msgid ""
"List of file extensions to be\n"
"associated with FlatCAM."
msgstr ""
"List of file extensions to be\n"
"associated with FlatCAM."

#: appGUI/preferences/utilities/FAExcPrefGroupUI.py:74
#: appGUI/preferences/utilities/FAGcoPrefGroupUI.py:64
#: appGUI/preferences/utilities/FAGrbPrefGroupUI.py:63
msgid "A file extension to be added or deleted to the list."
msgstr "A file extension to be added or deleted to the list."

#: appGUI/preferences/utilities/FAExcPrefGroupUI.py:82
#: appGUI/preferences/utilities/FAGcoPrefGroupUI.py:72
#: appGUI/preferences/utilities/FAGrbPrefGroupUI.py:71
msgid "Add Extension"
msgstr "Add Extension"

#: appGUI/preferences/utilities/FAExcPrefGroupUI.py:83
#: appGUI/preferences/utilities/FAGcoPrefGroupUI.py:73
#: appGUI/preferences/utilities/FAGrbPrefGroupUI.py:72
msgid "Add a file extension to the list"
msgstr "Add a file extension to the list"

#: appGUI/preferences/utilities/FAExcPrefGroupUI.py:84
#: appGUI/preferences/utilities/FAGcoPrefGroupUI.py:74
#: appGUI/preferences/utilities/FAGrbPrefGroupUI.py:73
msgid "Delete Extension"
msgstr "Delete Extension"

#: appGUI/preferences/utilities/FAExcPrefGroupUI.py:85
#: appGUI/preferences/utilities/FAGcoPrefGroupUI.py:75
#: appGUI/preferences/utilities/FAGrbPrefGroupUI.py:74
msgid "Delete a file extension from the list"
msgstr "Delete a file extension from the list"

#: appGUI/preferences/utilities/FAExcPrefGroupUI.py:92
#: appGUI/preferences/utilities/FAGcoPrefGroupUI.py:82
#: appGUI/preferences/utilities/FAGrbPrefGroupUI.py:81
msgid "Apply Association"
msgstr "Apply Association"

#: appGUI/preferences/utilities/FAExcPrefGroupUI.py:93
#: appGUI/preferences/utilities/FAGcoPrefGroupUI.py:83
#: appGUI/preferences/utilities/FAGrbPrefGroupUI.py:82
msgid ""
"Apply the file associations between\n"
"FlatCAM and the files with above extensions.\n"
"They will be active after next logon.\n"
"This work only in Windows."
msgstr ""
"Apply the file associations between\n"
"FlatCAM and the files with above extensions.\n"
"They will be active after next logon.\n"
"This work only in Windows."

#: appGUI/preferences/utilities/FAGcoPrefGroupUI.py:27
msgid "GCode File associations"
msgstr "GCode File associations"

#: appGUI/preferences/utilities/FAGrbPrefGroupUI.py:27
msgid "Gerber File associations"
msgstr "Gerber File associations"

#: appObjects/AppObject.py:165
#, python-brace-format
msgid ""
"Object ({kind}) failed because: {error} \n"
"\n"
msgstr ""
"Object ({kind}) failed because: {error} \n"
"\n"

#: appObjects/AppObject.py:184
msgid "Converting units to "
msgstr "Converting units to "

#: appObjects/AppObject.py:313
msgid "CREATE A NEW FLATCAM TCL SCRIPT"
msgstr "CREATE A NEW FLATCAM TCL SCRIPT"

#: appObjects/AppObject.py:314
msgid "TCL Tutorial is here"
msgstr "TCL Tutorial is here"

#: appObjects/AppObject.py:316
msgid "FlatCAM commands list"
msgstr "FlatCAM commands list"

#: appObjects/AppObject.py:317
msgid ""
"Type >help< followed by Run Code for a list of FlatCAM Tcl Commands "
"(displayed in Tcl Shell)."
msgstr ""
"Type >help< followed by Run Code for a list of FlatCAM Tcl Commands "
"(displayed in Tcl Shell)."

#: appObjects/AppObject.py:371 appObjects/AppObject.py:377
#: appObjects/AppObject.py:383 appObjects/AppObject.py:389
#: appObjects/AppObject.py:395 appObjects/AppObject.py:401
msgid "created/selected"
msgstr "created/selected"

#: appObjects/FlatCAMCNCJob.py:647 appObjects/FlatCAMDocument.py:71
#: appObjects/FlatCAMScript.py:81
msgid "<span style=\"color:green;\"><b>Basic</b></span>"
msgstr "<span style=\"color:green;\"><b>Basic</b></span>"

#: appObjects/FlatCAMCNCJob.py:654 appObjects/FlatCAMDocument.py:75
#: appObjects/FlatCAMScript.py:85
msgid "<span style=\"color:red;\"><b>Advanced</b></span>"
msgstr "<span style=\"color:red;\"><b>Advanced</b></span>"

#: appObjects/FlatCAMCNCJob.py:790 appObjects/FlatCAMCNCJob.py:1068
msgid ""
"Voronoi function can not be loaded.\n"
"Shapely >= 1.8 is required"
msgstr ""
"Voronoi function can not be loaded.\n"
"Shapely >= 1.8 is required"

#: appObjects/FlatCAMCNCJob.py:818
msgid "Click on canvas to add a Probe Point..."
msgstr "Click on canvas to add a Probe Point..."

#: appObjects/FlatCAMCNCJob.py:1014
msgid "Point is not within the object area. Choose another point."
msgstr "Point is not within the object area. Choose another point."

#: appObjects/FlatCAMCNCJob.py:1034
msgid ""
"Added a Probe Point... Click again to add another or right click to "
"finish ..."
msgstr ""
"Added a Probe Point... Click again to add another or right click to "
"finish ..."

#: appObjects/FlatCAMCNCJob.py:1056
msgid "Finished adding Probe Points..."
msgstr "Finished adding Probe Points..."

#: appObjects/FlatCAMCNCJob.py:1270
msgid "COM list updated ..."
msgstr "COM list updated ..."

#: appObjects/FlatCAMCNCJob.py:1306
msgid "Connected"
msgstr "Connected"

#: appObjects/FlatCAMCNCJob.py:1317
msgid "Port connected"
msgstr "Port connected"

#: appObjects/FlatCAMCNCJob.py:1321
msgid "Could not connect to GRBL on port"
msgstr "Could not connect to GRBL on port"

#: appObjects/FlatCAMCNCJob.py:1338
msgid "Port is connected. Disconnecting"
msgstr "Port is connected. Disconnecting"

#: appObjects/FlatCAMCNCJob.py:1340
msgid "Could not connect to port"
msgstr "Could not connect to port"

#: appObjects/FlatCAMCNCJob.py:1370 appObjects/FlatCAMCNCJob.py:1802
msgid "Sending GCode..."
msgstr "Sending GCode..."

#: appObjects/FlatCAMCNCJob.py:1499
msgid "GRBL is doing a home cycle."
msgstr "GRBL is doing a home cycle."

#: appObjects/FlatCAMCNCJob.py:1505
msgid "GRBL software reset was sent."
msgstr "GRBL software reset was sent."

#: appObjects/FlatCAMCNCJob.py:1513
msgid "GRBL resumed."
msgstr "GRBL resumed."

#: appObjects/FlatCAMCNCJob.py:1517
msgid "GRBL paused."
msgstr "GRBL paused."

#: appObjects/FlatCAMCNCJob.py:1661 appObjects/FlatCAMCNCJob.py:1853
#: appObjects/FlatCAMCNCJob.py:1940 appTools/ToolSolderPaste.py:1067
msgid "Export cancelled ..."
msgstr "Export cancelled ..."

#: appObjects/FlatCAMCNCJob.py:1685 appObjects/FlatCAMCNCJob.py:1975
#: appObjects/FlatCAMScript.py:133 app_Main.py:7178
msgid "Loading..."
msgstr "Loading..."

#: appObjects/FlatCAMCNCJob.py:1689
msgid "There is nothing to view"
msgstr "There is nothing to view"

#: appObjects/FlatCAMCNCJob.py:1695
msgid "Code Viewer"
msgstr "Code Viewer"

#: appObjects/FlatCAMCNCJob.py:1733
msgid "Loaded Machine Code into Code Viewer"
msgstr "Loaded Machine Code into Code Viewer"

#: appObjects/FlatCAMCNCJob.py:1778
msgid "Failed to open height map file"
msgstr "Failed to open height map file"

#: appObjects/FlatCAMCNCJob.py:1828
msgid "Finished probing. Doing the autolevelling."
msgstr "Finished probing. Doing the autolevelling."

#: appObjects/FlatCAMCNCJob.py:1833
msgid "Sending probing GCode to the GRBL controller."
msgstr "Sending probing GCode to the GRBL controller."

#: appObjects/FlatCAMCNCJob.py:1876
msgid "Empty GRBL heightmap."
msgstr "Empty GRBL heightmap."

#: appObjects/FlatCAMCNCJob.py:1880
msgid "Finished autolevelling."
msgstr "Finished autolevelling."

#: appObjects/FlatCAMCNCJob.py:1966
msgid "File saved to"
msgstr "File saved to"

#: appObjects/FlatCAMCNCJob.py:1989
msgid "Code Review"
msgstr "Code Review"

#: appObjects/FlatCAMCNCJob.py:2172
msgid "This CNCJob object can't be processed because it is a"
msgstr "This CNCJob object can't be processed because it is a"

#: appObjects/FlatCAMCNCJob.py:2174
msgid "CNCJob object"
msgstr "CNCJob object"

#: appObjects/FlatCAMDocument.py:173
msgid "Document Editor"
msgstr "Document Editor"

#: appObjects/FlatCAMExcellon.py:877 appObjects/FlatCAMExcellon.py:985
#: appTools/ToolDrilling.py:1612 appTools/ToolMilling.py:1038
#: appTools/ToolMilling.py:1154 appTools/ToolMilling.py:1340
msgid "Please select one or more tools from the list and try again."
msgstr "Please select one or more tools from the list and try again."

#: appObjects/FlatCAMExcellon.py:882 appTools/ToolMilling.py:1045
msgid "Milling tool for DRILLS is larger than hole size. Cancelled."
msgstr "Milling tool for DRILLS is larger than hole size. Cancelled."

#: appObjects/FlatCAMExcellon.py:905 appObjects/FlatCAMExcellon.py:1005
#: appTools/ToolDrilling.py:1762 appTools/ToolDrilling.py:1827
#: appTools/ToolMilling.py:1071 appTools/ToolMilling.py:1175
#: appTools/ToolMilling.py:1360 tclCommands/TclCommandDrillcncjob.py:195
msgid "Tool_nr"
msgstr "Tool_nr"

#: appObjects/FlatCAMExcellon.py:905 appObjects/FlatCAMExcellon.py:1005
#: appTools/ToolDrilling.py:1762 appTools/ToolDrilling.py:1827
#: appTools/ToolMilling.py:1071 appTools/ToolMilling.py:1175
#: appTools/ToolMilling.py:1360 tclCommands/TclCommandDrillcncjob.py:195
msgid "Drills_Nr"
msgstr "Drills_Nr"

#: appObjects/FlatCAMExcellon.py:905 appObjects/FlatCAMExcellon.py:1005
#: appTools/ToolDrilling.py:1762 appTools/ToolDrilling.py:1827
#: appTools/ToolMilling.py:1071 appTools/ToolMilling.py:1175
#: appTools/ToolMilling.py:1360 tclCommands/TclCommandDrillcncjob.py:195
msgid "Slots_Nr"
msgstr "Slots_Nr"

#: appObjects/FlatCAMExcellon.py:994 appTools/ToolMilling.py:1163
msgid "Milling tool for SLOTS is larger than hole size. Cancelled."
msgstr "Milling tool for SLOTS is larger than hole size. Cancelled."

#: appObjects/FlatCAMGeometry.py:404 appObjects/FlatCAMGeometry.py:903
#: appObjects/FlatCAMGeometry.py:966 appTools/ToolDrilling.py:705
#: appTools/ToolDrilling.py:990 appTools/ToolDrilling.py:1037
#: appTools/ToolIsolation.py:532 appTools/ToolIsolation.py:645
#: appTools/ToolIsolation.py:711 appTools/ToolMilling.py:628
#: appTools/ToolMilling.py:749 appTools/ToolMilling.py:794
#: appTools/ToolNCC.py:276 appTools/ToolNCC.py:342 appTools/ToolNCC.py:729
#: appTools/ToolPaint.py:250 appTools/ToolPaint.py:314
#: appTools/ToolPaint.py:664
msgid "Multiple Tools"
msgstr "Multiple Tools"

#: appObjects/FlatCAMGeometry.py:898 appObjects/FlatCAMGeometry.py:937
#: appTools/ToolDrilling.py:754 appTools/ToolDrilling.py:983
#: appTools/ToolDrilling.py:1021 appTools/ToolIsolation.py:640
#: appTools/ToolIsolation.py:675 appTools/ToolMilling.py:744
#: appTools/ToolMilling.py:779 appTools/ToolNCC.py:271 appTools/ToolNCC.py:306
#: appTools/ToolPaint.py:245 appTools/ToolPaint.py:280 app_Main.py:2389
msgid "No Tool Selected"
msgstr "No Tool Selected"

#: appObjects/FlatCAMGeometry.py:1040 appTools/ToolCutOut.py:281
#: appTools/ToolIsolation.py:805 appTools/ToolIsolation.py:1149
#: appTools/ToolIsolation.py:1281 appTools/ToolNCC.py:476
#: appTools/ToolNCC.py:1094 appTools/ToolNCC.py:1232 appTools/ToolPaint.py:394
#: appTools/ToolPaint.py:695 appTools/ToolPaint.py:832
#: appTools/ToolSolderPaste.py:131 appTools/ToolSolderPaste.py:464
#: app_Main.py:4621
msgid "Please enter a tool diameter with non-zero value, in Float format."
msgstr "Please enter a tool diameter with non-zero value, in Float format."

#: appObjects/FlatCAMGeometry.py:1115 appTools/ToolCutOut.py:357
#: appTools/ToolIsolation.py:1230 appTools/ToolNCC.py:1177
#: appTools/ToolPaint.py:776
msgid "Tool not in Tools Database. Adding a default tool."
msgstr "Tool not in Tools Database. Adding a default tool."

#: appObjects/FlatCAMGeometry.py:1122 appTools/ToolCutOut.py:364
#: appTools/ToolDrilling.py:955 appTools/ToolIsolation.py:1237
#: appTools/ToolNCC.py:1184 appTools/ToolPaint.py:784
msgid ""
"Cancelled.\n"
"Multiple tools for one tool diameter found in Tools Database."
msgstr ""
"Cancelled.\n"
"Multiple tools for one tool diameter found in Tools Database."

#: appObjects/FlatCAMGeometry.py:1155 appTools/ToolIsolation.py:1272
#: appTools/ToolNCC.py:1219 appTools/ToolPaint.py:819
msgid "New tool added to Tool Table from Tools Database."
msgstr "New tool added to Tool Table from Tools Database."

#: appObjects/FlatCAMGeometry.py:1222
msgid "Tool added in Tool Table."
msgstr "Tool added in Tool Table."

#: appObjects/FlatCAMGeometry.py:1333 appObjects/FlatCAMGeometry.py:1342
msgid "Failed. Select a tool to copy."
msgstr "Failed. Select a tool to copy."

#: appObjects/FlatCAMGeometry.py:1371
msgid "Tool was copied in Tool Table."
msgstr "Tool was copied in Tool Table."

#: appObjects/FlatCAMGeometry.py:1401
msgid "Tool was edited in Tool Table."
msgstr "Tool was edited in Tool Table."

#: appObjects/FlatCAMGeometry.py:1434 appObjects/FlatCAMGeometry.py:1443
msgid "Failed. Select a tool to delete."
msgstr "Failed. Select a tool to delete."

#: appObjects/FlatCAMGeometry.py:1467
msgid "Tool was deleted in Tool Table."
msgstr "Tool was deleted in Tool Table."

#: appObjects/FlatCAMGeometry.py:1504 appObjects/FlatCAMGeometry.py:1513
msgid ""
"Disabled because the tool is V-shape.\n"
"For V-shape tools the depth of cut is\n"
"calculated from other parameters like:\n"
"- 'V-tip Angle' -> angle at the tip of the tool\n"
"- 'V-tip Dia' -> diameter at the tip of the tool \n"
"- Tool Dia -> 'Dia' column found in the Tool Table\n"
"NB: a value of zero means that Tool Dia = 'V-tip Dia'"
msgstr ""
"Disabled because the tool is V-shape.\n"
"For V-shape tools the depth of cut is\n"
"calculated from other parameters like:\n"
"- 'V-tip Angle' -> angle at the tip of the tool\n"
"- 'V-tip Dia' -> diameter at the tip of the tool \n"
"- Tool Dia -> 'Dia' column found in the Tool Table\n"
"NB: a value of zero means that Tool Dia = 'V-tip Dia'"

#: appObjects/FlatCAMGeometry.py:1932 appTools/ToolDrilling.py:1256
#: appTools/ToolMilling.py:1256
msgid "Focus Z"
msgstr "Focus Z"

#: appObjects/FlatCAMGeometry.py:1951 appTools/ToolDrilling.py:1278
#: appTools/ToolMilling.py:1275
msgid "Laser Power"
msgstr "Laser Power"

#: appObjects/FlatCAMGeometry.py:2004
msgid "This Geometry can't be processed because it is"
msgstr "This Geometry can't be processed because it is"

#: appObjects/FlatCAMGeometry.py:2004
msgid "geometry"
msgstr "geometry"

#: appObjects/FlatCAMGeometry.py:2041
msgid "Failed. No tool selected in the tool table ..."
msgstr "Failed. No tool selected in the tool table ..."

#: appObjects/FlatCAMGeometry.py:2142 appObjects/FlatCAMGeometry.py:2300
msgid ""
"Tool Offset is selected in Tool Table but no value is provided.\n"
"Add a Tool Offset or change the Offset Type."
msgstr ""
"Tool Offset is selected in Tool Table but no value is provided.\n"
"Add a Tool Offset or change the Offset Type."

#: appObjects/FlatCAMGeometry.py:2215 appObjects/FlatCAMGeometry.py:2363
msgid "G-Code parsing in progress..."
msgstr "G-Code parsing in progress..."

#: appObjects/FlatCAMGeometry.py:2217 appObjects/FlatCAMGeometry.py:2365
msgid "G-Code parsing finished..."
msgstr "G-Code parsing finished..."

#: appObjects/FlatCAMGeometry.py:2224
msgid "Finished G-Code processing"
msgstr "Finished G-Code processing"

#: appObjects/FlatCAMGeometry.py:2226 appObjects/FlatCAMGeometry.py:2376
msgid "G-Code processing failed with error"
msgstr "G-Code processing failed with error"

#: appObjects/FlatCAMGeometry.py:2270 appTools/ToolSolderPaste.py:866
msgid "Cancelled. Empty file, it has no geometry"
msgstr "Cancelled. Empty file, it has no geometry"

#: appObjects/FlatCAMGeometry.py:2374 appObjects/FlatCAMGeometry.py:2545
msgid "Finished G-Code processing..."
msgstr "Finished G-Code processing..."

#: appObjects/FlatCAMGeometry.py:2393 appObjects/FlatCAMGeometry.py:2398
#: appObjects/FlatCAMGeometry.py:2550 appTools/ToolDrilling.py:1960
#: appTools/ToolMilling.py:1417
msgid "Generating CNC Code"
msgstr "Generating CNC Code"

#: appObjects/FlatCAMGeometry.py:2396 appObjects/FlatCAMGeometry.py:2401
#: appObjects/FlatCAMGeometry.py:2552
msgid "CNCjob created"
msgstr "CNCjob created"

#: appObjects/FlatCAMGeometry.py:2585
msgid "Polish"
msgstr "Polish"

#: appObjects/FlatCAMGeometry.py:2635 appTools/ToolPaint.py:1699
msgid "Geometry could not be painted completely"
msgstr "Geometry could not be painted completely"

#: appObjects/FlatCAMGeometry.py:2643 appTools/ToolPaint.py:1862
#: appTools/ToolPaint.py:2071
msgid ""
"Could not do Paint. Try a different combination of parameters. Or a "
"different strategy of paint"
msgstr ""
"Could not do Paint. Try a different combination of parameters. Or a "
"different strategy of paint"

#: appObjects/FlatCAMGeometry.py:2673 appObjects/FlatCAMGeometry.py:2682
#: appParsers/ParseGerber.py:1950 appParsers/ParseGerber.py:1960
msgid "Scale factor has to be a number: integer or float."
msgstr "Scale factor has to be a number: integer or float."

#: appObjects/FlatCAMGeometry.py:2745
msgid "Geometry Scale done."
msgstr "Geometry Scale done."

#: appObjects/FlatCAMGeometry.py:2762 appParsers/ParseGerber.py:2076
msgid ""
"An (x,y) pair of values are needed. Probable you entered only one value in "
"the Offset field."
msgstr ""
"An (x,y) pair of values are needed. Probable you entered only one value in "
"the Offset field."

#: appObjects/FlatCAMGeometry.py:2818
msgid "Geometry Offset done."
msgstr "Geometry Offset done."

#: appObjects/FlatCAMGeometry.py:2847
msgid ""
"The Toolchange X,Y field in Edit -> Preferences has to be in the format (x, "
"y)\n"
"but now there is only one value, not two."
msgstr ""
"The Toolchange X,Y field in Edit -> Preferences has to be in the format (x, "
"y)\n"
"but now there is only one value, not two."

#: appObjects/FlatCAMGeometry.py:2950 appTools/ToolDrilling.py:1376
#: appTools/ToolMilling.py:1488
msgid "Delete failed. There are no exclusion areas to delete."
msgstr "Delete failed. There are no exclusion areas to delete."

#: appObjects/FlatCAMGeometry.py:2967 appTools/ToolDrilling.py:1393
#: appTools/ToolMilling.py:1505
msgid "Delete failed. Nothing is selected."
msgstr "Delete failed. Nothing is selected."

#: appObjects/FlatCAMGerber.py:365 appTools/ToolIsolation.py:1433
msgid "Buffering solid geometry"
msgstr "Buffering solid geometry"

#: appObjects/FlatCAMGerber.py:372 appTools/ToolIsolation.py:1455
msgid "Done"
msgstr "Done"

#: appObjects/FlatCAMGerber.py:398 appObjects/FlatCAMGerber.py:424
msgid "Operation could not be done."
msgstr "Operation could not be done."

#: appObjects/FlatCAMGerber.py:556 appObjects/FlatCAMGerber.py:633
#: appTools/ToolIsolation.py:1679 appTools/ToolIsolation.py:2049
#: appTools/ToolNCC.py:1959 appTools/ToolNCC.py:2980 appTools/ToolNCC.py:3360
msgid "Isolation geometry could not be generated."
msgstr "Isolation geometry could not be generated."

#: appObjects/FlatCAMGerber.py:583 appObjects/FlatCAMGerber.py:711
#: appTools/ToolIsolation.py:1745 appTools/ToolIsolation.py:1941
#: appTools/ToolIsolation.py:2133
msgid "Isolation geometry created"
msgstr "Isolation geometry created"

#: appObjects/FlatCAMObj.py:252
msgid "Name changed from"
msgstr "Name changed from"

#: appObjects/FlatCAMObj.py:252
msgid "to"
msgstr "to"

#: appObjects/FlatCAMObj.py:263
msgid "Offsetting..."
msgstr "Offsetting..."

#: appObjects/FlatCAMObj.py:277 appObjects/FlatCAMObj.py:282
msgid "Scaling could not be executed."
msgstr "Scaling could not be executed."

#: appObjects/FlatCAMObj.py:286 appObjects/FlatCAMObj.py:294
msgid "Scale done."
msgstr "Scale done."

#: appObjects/FlatCAMObj.py:292
msgid "Scaling..."
msgstr "Scaling..."

#: appObjects/FlatCAMObj.py:310
msgid "Skewing..."
msgstr "Skewing..."

#: appObjects/FlatCAMObj.py:487 appTools/ToolCalculators.py:341
#: appTools/ToolProperties.py:152
msgid "Dimensions"
msgstr "Dimensions"

#: appObjects/FlatCAMObj.py:510
msgid "Calculating dimensions ... Please wait."
msgstr "Calculating dimensions ... Please wait."

#: appObjects/FlatCAMObj.py:724 appObjects/FlatCAMObj.py:792
#: appTools/ToolProperties.py:418 appTools/ToolProperties.py:486
msgid "Drills number"
msgstr "Drills number"

#: appObjects/FlatCAMObj.py:725 appObjects/FlatCAMObj.py:794
#: appTools/ToolProperties.py:419 appTools/ToolProperties.py:488
msgid "Slots number"
msgstr "Slots number"

#: appObjects/FlatCAMObj.py:727 appTools/ToolProperties.py:421
msgid "Drills total number:"
msgstr "Drills total number:"

#: appObjects/FlatCAMObj.py:728 appTools/ToolProperties.py:422
msgid "Slots total number:"
msgstr "Slots total number:"

#: appObjects/FlatCAMObj.py:755 appObjects/FlatCAMObj.py:758
#: appObjects/FlatCAMObj.py:761 appObjects/FlatCAMObj.py:789
#: appObjects/FlatCAMObj.py:796 appObjects/FlatCAMObj.py:799
#: appTools/ToolProperties.py:449 appTools/ToolProperties.py:452
#: appTools/ToolProperties.py:455 appTools/ToolProperties.py:483
#: appTools/ToolProperties.py:490 appTools/ToolProperties.py:493
msgid "Present"
msgstr "Present"

#: appObjects/FlatCAMObj.py:756 appObjects/FlatCAMObj.py:790
#: appTools/ToolProperties.py:450 appTools/ToolProperties.py:484
msgid "Solid Geometry"
msgstr "Solid Geometry"

#: appObjects/FlatCAMObj.py:759 appObjects/FlatCAMObj.py:797
#: appTools/ToolProperties.py:453 appTools/ToolProperties.py:491
msgid "GCode Text"
msgstr "GCode Text"

#: appObjects/FlatCAMObj.py:762 appObjects/FlatCAMObj.py:800
#: appTools/ToolProperties.py:456 appTools/ToolProperties.py:494
msgid "GCode Geometry"
msgstr "GCode Geometry"

#: appObjects/FlatCAMObj.py:770 appObjects/FlatCAMObj.py:843
#: appTools/ToolProperties.py:464 appTools/ToolProperties.py:537
msgid "Tool Data"
msgstr "Tool Data"

#: appObjects/FlatCAMObj.py:807 appTools/ToolProperties.py:501
msgid "Depth of Cut"
msgstr "Depth of Cut"

#: appObjects/FlatCAMObj.py:819 appTools/ToolProperties.py:513
msgid "Clearance Height"
msgstr "Clearance Height"

#: appObjects/FlatCAMObj.py:857 appTools/ToolProperties.py:551
msgid "Routing time"
msgstr "Routing time"

#: appObjects/FlatCAMObj.py:882 appTools/ToolProperties.py:576
msgid "Width"
msgstr "Width"

#: appObjects/FlatCAMObj.py:888 appObjects/FlatCAMObj.py:896
#: appTools/ToolProperties.py:582 appTools/ToolProperties.py:590
msgid "Box Area"
msgstr "Box Area"

#: appObjects/FlatCAMObj.py:891 appObjects/FlatCAMObj.py:899
#: appTools/ToolProperties.py:585 appTools/ToolProperties.py:593
msgid "Convex_Hull Area"
msgstr "Convex_Hull Area"

#: appObjects/FlatCAMObj.py:906 appObjects/FlatCAMObj.py:909
#: appTools/ToolProperties.py:600 appTools/ToolProperties.py:603
msgid "Copper Area"
msgstr "Copper Area"

#: appObjects/FlatCAMScript.py:159
msgid "Script Editor"
msgstr "Script Editor"

#: appObjects/ObjectCollection.py:236
msgid "Script"
msgstr "Script"

#: appObjects/ObjectCollection.py:519
#, python-brace-format
msgid "Object renamed from <b>{old}</b> to <b>{new}</b>"
msgstr "Object renamed from <b>{old}</b> to <b>{new}</b>"

#: appObjects/ObjectCollection.py:933 appObjects/ObjectCollection.py:939
#: appObjects/ObjectCollection.py:945 appObjects/ObjectCollection.py:951
#: appObjects/ObjectCollection.py:957 appObjects/ObjectCollection.py:963
#: app_Main.py:6882 app_Main.py:6888 app_Main.py:6894 app_Main.py:6900
msgid "selected"
msgstr "selected"

#: appObjects/ObjectCollection.py:994
msgid "Cause of error"
msgstr "Cause of error"

#: appObjects/ObjectCollection.py:1195
msgid "All objects are selected."
msgstr "All objects are selected."

#: appObjects/ObjectCollection.py:1205
msgid "Objects selection is cleared."
msgstr "Objects selection is cleared."

#: appParsers/ParseExcellon.py:292
msgid "This is GCODE mark"
msgstr "This is GCODE mark"

#: appParsers/ParseExcellon.py:436
msgid ""
"No tool diameter info's. See shell.\n"
"A tool change event: T"
msgstr ""
"No tool diameter info's. See shell.\n"
"A tool change event: T"

#: appParsers/ParseExcellon.py:439
msgid ""
"was found but the Excellon file have no informations regarding the tool "
"diameters therefore the application will try to load it by using some 'fake' "
"diameters.\n"
"The user needs to edit the resulting Excellon object and change the "
"diameters to reflect the real diameters."
msgstr ""
"was found but the Excellon file have no informations regarding the tool "
"diameters therefore the application will try to load it by using some 'fake' "
"diameters.\n"
"The user needs to edit the resulting Excellon object and change the "
"diameters to reflect the real diameters."

#: appParsers/ParseExcellon.py:975
msgid ""
"Excellon Parser error.\n"
"Parsing Failed. Line"
msgstr ""
"Excellon Parser error.\n"
"Parsing Failed. Line"

#: appParsers/ParseFont.py:305
msgid "Font not supported, try another one."
msgstr "Font not supported, try another one."

#: appParsers/ParseGerber.py:424
msgid "Gerber processing. Parsing"
msgstr "Gerber processing. Parsing"

#: appParsers/ParseGerber.py:424 appParsers/ParseHPGL2.py:201
msgid "lines"
msgstr "lines"

#: appParsers/ParseGerber.py:1035 appParsers/ParseGerber.py:1135
#: appParsers/ParseHPGL2.py:294 appParsers/ParseHPGL2.py:308
#: appParsers/ParseHPGL2.py:327 appParsers/ParseHPGL2.py:351
#: appParsers/ParseHPGL2.py:386
msgid "Coordinates missing, line ignored"
msgstr "Coordinates missing, line ignored"

#: appParsers/ParseGerber.py:1037 appParsers/ParseGerber.py:1137
msgid "GERBER file might be CORRUPT. Check the file !!!"
msgstr "GERBER file might be CORRUPT. Check the file !!!"

#: appParsers/ParseGerber.py:1091
msgid ""
"Region does not have enough points. File will be processed but there are "
"parser errors. Line number"
msgstr ""
"Region does not have enough points. File will be processed but there are "
"parser errors. Line number"

#: appParsers/ParseGerber.py:1521 appParsers/ParseHPGL2.py:421
msgid "Gerber processing. Joining polygons"
msgstr "Gerber processing. Joining polygons"

#: appParsers/ParseGerber.py:1539
msgid "Gerber processing. Applying Gerber polarity."
msgstr "Gerber processing. Applying Gerber polarity."

#: appParsers/ParseGerber.py:1599
msgid "Gerber Line"
msgstr "Gerber Line"

#: appParsers/ParseGerber.py:1599
msgid "Gerber Line Content"
msgstr "Gerber Line Content"

#: appParsers/ParseGerber.py:1601
msgid "Gerber Parser ERROR"
msgstr "Gerber Parser ERROR"

#: appParsers/ParseGerber.py:2040
msgid "Gerber Scale done."
msgstr "Gerber Scale done."

#: appParsers/ParseGerber.py:2132
msgid "Gerber Offset done."
msgstr "Gerber Offset done."

#: appParsers/ParseGerber.py:2208
msgid "Gerber Mirror done."
msgstr "Gerber Mirror done."

#: appParsers/ParseGerber.py:2282
msgid "Gerber Skew done."
msgstr "Gerber Skew done."

#: appParsers/ParseGerber.py:2344
msgid "Gerber Rotate done."
msgstr "Gerber Rotate done."

#: appParsers/ParseGerber.py:2501
msgid "Gerber Buffer done."
msgstr "Gerber Buffer done."

#: appParsers/ParseHPGL2.py:201
msgid "HPGL2 processing. Parsing"
msgstr "HPGL2 processing. Parsing"

#: appParsers/ParseHPGL2.py:433
msgid "HPGL2 Line"
msgstr "HPGL2 Line"

#: appParsers/ParseHPGL2.py:433
msgid "HPGL2 Line Content"
msgstr "HPGL2 Line Content"

#: appParsers/ParseHPGL2.py:434
msgid "HPGL2 Parser ERROR"
msgstr "HPGL2 Parser ERROR"

#: appProcess.py:172
msgid "processes running."
msgstr "processes running."

#: appTools/ToolAlignObjects.py:32 appTools/ToolAlignObjects.py:360
msgid "Align Objects"
msgstr "Align Objects"

#: appTools/ToolAlignObjects.py:104
msgid "Align Tool"
msgstr "Align Tool"

#: appTools/ToolAlignObjects.py:149
msgid "There is no aligned FlatCAM object selected..."
msgstr "There is no aligned FlatCAM object selected..."

#: appTools/ToolAlignObjects.py:159
msgid "There is no aligner FlatCAM object selected..."
msgstr "There is no aligner FlatCAM object selected..."

#: appTools/ToolAlignObjects.py:181 appTools/ToolAlignObjects.py:245
msgid "First Point"
msgstr "First Point"

#: appTools/ToolAlignObjects.py:181 appTools/ToolAlignObjects.py:260
msgid "Click on the START point."
msgstr "Click on the START point."

#: appTools/ToolAlignObjects.py:240 appTools/ToolCalibration.py:276
#: appTools/ToolDblSided.py:288
msgid "Cancelled by user request."
msgstr "Cancelled by user request."

#: appTools/ToolAlignObjects.py:245 appTools/ToolAlignObjects.py:267
msgid "Click on the DESTINATION point."
msgstr "Click on the DESTINATION point."

#: appTools/ToolAlignObjects.py:245 appTools/ToolAlignObjects.py:260
#: appTools/ToolAlignObjects.py:267
msgid "Or right click to cancel."
msgstr "Or right click to cancel."

#: appTools/ToolAlignObjects.py:260 appTools/ToolAlignObjects.py:267
#: appTools/ToolFiducials.py:747
msgid "Second Point"
msgstr "Second Point"

#: appTools/ToolAlignObjects.py:386
msgid "MOVING object"
msgstr "MOVING object"

#: appTools/ToolAlignObjects.py:390
msgid ""
"Specify the type of object to be aligned.\n"
"It can be of type: Gerber or Excellon.\n"
"The selection here decide the type of objects that will be\n"
"in the Object combobox."
msgstr ""
"Specify the type of object to be aligned.\n"
"It can be of type: Gerber or Excellon.\n"
"The selection here decide the type of objects that will be\n"
"in the Object combobox."

#: appTools/ToolAlignObjects.py:411
msgid "Object to be aligned."
msgstr "Object to be aligned."

#: appTools/ToolAlignObjects.py:423
msgid "DESTINATION object"
msgstr "DESTINATION object"

#: appTools/ToolAlignObjects.py:425
msgid ""
"Specify the type of object to be aligned to.\n"
"It can be of type: Gerber or Excellon.\n"
"The selection here decide the type of objects that will be\n"
"in the Object combobox."
msgstr ""
"Specify the type of object to be aligned to.\n"
"It can be of type: Gerber or Excellon.\n"
"The selection here decide the type of objects that will be\n"
"in the Object combobox."

#: appTools/ToolAlignObjects.py:447
msgid "Object to be aligned to. Aligner."
msgstr "Object to be aligned to. Aligner."

#: appTools/ToolAlignObjects.py:460
msgid "Alignment Type"
msgstr "Alignment Type"

#: appTools/ToolAlignObjects.py:462
msgid ""
"The type of alignment can be:\n"
"- Single Point -> it require a single point of sync, the action will be a "
"translation\n"
"- Dual Point -> it require two points of sync, the action will be "
"translation followed by rotation"
msgstr ""
"The type of alignment can be:\n"
"- Single Point -> it require a single point of sync, the action will be a "
"translation\n"
"- Dual Point -> it require two points of sync, the action will be "
"translation followed by rotation"

#: appTools/ToolAlignObjects.py:468
msgid "Single Point"
msgstr "Single Point"

#: appTools/ToolAlignObjects.py:469
msgid "Dual Point"
msgstr "Dual Point"

#: appTools/ToolAlignObjects.py:481
msgid "Align Object"
msgstr "Align Object"

#: appTools/ToolAlignObjects.py:484
msgid ""
"Align the specified object to the aligner object.\n"
"If only one point is used then it assumes translation.\n"
"If tho points are used it assume translation and rotation."
msgstr ""
"Align the specified object to the aligner object.\n"
"If only one point is used then it assumes translation.\n"
"If tho points are used it assume translation and rotation."

#: appTools/ToolAlignObjects.py:499 appTools/ToolCalculators.py:501
#: appTools/ToolCalibration.py:1378 appTools/ToolCopperThieving.py:1698
#: appTools/ToolCorners.py:657 appTools/ToolCutOut.py:2411
#: appTools/ToolDblSided.py:946 appTools/ToolDrilling.py:2649
#: appTools/ToolEtchCompensation.py:459 appTools/ToolExtractDrills.py:699
#: appTools/ToolFiducials.py:962 appTools/ToolFilm.py:1387
#: appTools/ToolInvertGerber.py:284 appTools/ToolIsolation.py:3582
#: appTools/ToolMilling.py:2324 appTools/ToolNCC.py:4496
#: appTools/ToolOptimal.py:594 appTools/ToolPaint.py:3183
#: appTools/ToolPanelize.py:891 appTools/ToolPunchGerber.py:1308
#: appTools/ToolQRCode.py:912 appTools/ToolRulesCheck.py:1627
#: appTools/ToolSolderPaste.py:1558 appTools/ToolSub.py:807
#: appTools/ToolTransform.py:920
msgid "Reset Tool"
msgstr "Reset Tool"

#: appTools/ToolAlignObjects.py:502 appTools/ToolCalculators.py:504
#: appTools/ToolCalibration.py:1381 appTools/ToolCopperThieving.py:1701
#: appTools/ToolCorners.py:660 appTools/ToolCutOut.py:2414
#: appTools/ToolDblSided.py:949 appTools/ToolDrilling.py:2652
#: appTools/ToolEtchCompensation.py:462 appTools/ToolExtractDrills.py:702
#: appTools/ToolFiducials.py:965 appTools/ToolFilm.py:1390
#: appTools/ToolInvertGerber.py:287 appTools/ToolIsolation.py:3585
#: appTools/ToolMilling.py:2327 appTools/ToolNCC.py:4499
#: appTools/ToolOptimal.py:597 appTools/ToolPaint.py:3186
#: appTools/ToolPanelize.py:894 appTools/ToolPunchGerber.py:1311
#: appTools/ToolQRCode.py:915 appTools/ToolRulesCheck.py:1630
#: appTools/ToolSolderPaste.py:1561 appTools/ToolSub.py:810
#: appTools/ToolTransform.py:923
msgid "Will reset the tool parameters."
msgstr "Will reset the tool parameters."

#: appTools/ToolCalculators.py:79
msgid "Calc. Tool"
msgstr "Calc. Tool"

#: appTools/ToolCalculators.py:190
msgid "Calculators"
msgstr "Calculators"

#: appTools/ToolCalculators.py:192
msgid "Units Calculator"
msgstr "Units Calculator"

#: appTools/ToolCalculators.py:236
msgid "Here you enter the value to be converted from INCH to MM"
msgstr "Here you enter the value to be converted from INCH to MM"

#: appTools/ToolCalculators.py:241
msgid "Here you enter the value to be converted from MM to INCH"
msgstr "Here you enter the value to be converted from MM to INCH"

#: appTools/ToolCalculators.py:277
msgid ""
"This is the angle of the tip of the tool.\n"
"It is specified by manufacturer."
msgstr ""
"This is the angle of the tip of the tool.\n"
"It is specified by manufacturer."

#: appTools/ToolCalculators.py:286
msgid ""
"This is the depth to cut into the material.\n"
"In the CNCJob is the CutZ parameter."
msgstr ""
"This is the depth to cut into the material.\n"
"In the CNCJob is the CutZ parameter."

#: appTools/ToolCalculators.py:294
msgid ""
"This is the tool diameter to be entered into\n"
"FlatCAM Gerber section.\n"
"In the CNCJob section it is called >Tool dia<."
msgstr ""
"This is the tool diameter to be entered into\n"
"FlatCAM Gerber section.\n"
"In the CNCJob section it is called >Tool dia<."

#: appTools/ToolCalculators.py:305 appTools/ToolCalculators.py:490
msgid "Calculate"
msgstr "Calculate"

#: appTools/ToolCalculators.py:309
msgid ""
"Calculate either the Cut Z or the effective tool diameter,\n"
"  depending on which is desired and which is known. "
msgstr ""
"Calculate either the Cut Z or the effective tool diameter,\n"
"  depending on which is desired and which is known. "

#: appTools/ToolCalculators.py:336
msgid "Area Calculation"
msgstr "Area Calculation"

#: appTools/ToolCalculators.py:338
msgid "Choose how to calculate the board area."
msgstr "Choose how to calculate the board area."

#: appTools/ToolCalculators.py:356 appTools/ToolCalculators.py:374
#: appTools/ToolCalculators.py:392
msgid "cm"
msgstr "cm"

#: appTools/ToolCalculators.py:437
msgid "um"
msgstr "um"

#: appTools/ToolCalculators.py:448
msgid "Current Value"
msgstr "Current Value"

#: appTools/ToolCalculators.py:449
msgid ""
"This is the current intensity value\n"
"to be set on the Power Supply. In Amps."
msgstr ""
"This is the current intensity value\n"
"to be set on the Power Supply. In Amps."

#: appTools/ToolCalculators.py:469
msgid "Time"
msgstr "Time"

#: appTools/ToolCalculators.py:470
msgid ""
"This is the calculated time required for the procedure.\n"
"In minutes."
msgstr ""
"This is the calculated time required for the procedure.\n"
"In minutes."

#: appTools/ToolCalculators.py:493
msgid ""
"Calculate the current intensity value and the procedure time,\n"
"depending on the parameters above"
msgstr ""
"Calculate the current intensity value and the procedure time,\n"
"depending on the parameters above"

#: appTools/ToolCalibration.py:156
msgid "Tool initialized"
msgstr "Tool initialized"

#: appTools/ToolCalibration.py:194
msgid "There is no source FlatCAM object selected..."
msgstr "There is no source FlatCAM object selected..."

#: appTools/ToolCalibration.py:215
msgid "Get First calibration point. Bottom Left..."
msgstr "Get First calibration point. Bottom Left..."

#: appTools/ToolCalibration.py:282
msgid "Get Second calibration point. Bottom Right (Top Left)..."
msgstr "Get Second calibration point. Bottom Right (Top Left)..."

#: appTools/ToolCalibration.py:286
msgid "Get Third calibration point. Top Left (Bottom Right)..."
msgstr "Get Third calibration point. Top Left (Bottom Right)..."

#: appTools/ToolCalibration.py:290
msgid "Get Forth calibration point. Top Right..."
msgstr "Get Forth calibration point. Top Right..."

#: appTools/ToolCalibration.py:294
msgid "Done. All four points have been acquired."
msgstr "Done. All four points have been acquired."

#: appTools/ToolCalibration.py:325
msgid "Verification GCode for FlatCAM Calibration Tool"
msgstr "Verification GCode for FlatCAM Calibration Tool"

#: appTools/ToolCalibration.py:337 appTools/ToolCalibration.py:423
msgid "Gcode Viewer"
msgstr "Gcode Viewer"

#: appTools/ToolCalibration.py:353
msgid "Cancelled. Four points are needed for GCode generation."
msgstr "Cancelled. Four points are needed for GCode generation."

#: appTools/ToolCalibration.py:603 appTools/ToolCalibration.py:699
msgid "There is no FlatCAM object selected..."
msgstr "There is no FlatCAM object selected..."

#: appTools/ToolCalibration.py:764
msgid "Parameters used when creating the GCode in this tool."
msgstr "Parameters used when creating the GCode in this tool."

#: appTools/ToolCalibration.py:868
msgid "STEP 1: Acquire Calibration Points"
msgstr "STEP 1: Acquire Calibration Points"

#: appTools/ToolCalibration.py:870
msgid ""
"Pick four points by clicking on canvas.\n"
"Those four points should be in the four\n"
"(as much as possible) corners of the object."
msgstr ""
"Pick four points by clicking on canvas.\n"
"Those four points should be in the four\n"
"(as much as possible) corners of the object."

#: appTools/ToolCalibration.py:888 appTools/ToolImage.py:195
#: appTools/ToolPanelize.py:677 appTools/ToolProperties.py:176
msgid "Object Type"
msgstr "Object Type"

#: appTools/ToolCalibration.py:905
msgid "Source object selection"
msgstr "Source object selection"

#: appTools/ToolCalibration.py:907
msgid "FlatCAM Object to be used as a source for reference points."
msgstr "FlatCAM Object to be used as a source for reference points."

#: appTools/ToolCalibration.py:913
msgid "Calibration Points"
msgstr "Calibration Points"

#: appTools/ToolCalibration.py:915
msgid ""
"Contain the expected calibration points and the\n"
"ones measured."
msgstr ""
"Contain the expected calibration points and the\n"
"ones measured."

#: appTools/ToolCalibration.py:930 appTools/ToolSub.py:705
#: appTools/ToolSub.py:758
msgid "Target"
msgstr "Target"

#: appTools/ToolCalibration.py:931
msgid "Found Delta"
msgstr "Found Delta"

#: appTools/ToolCalibration.py:943
msgid "Bot Left X"
msgstr "Bot Left X"

#: appTools/ToolCalibration.py:952
msgid "Bot Left Y"
msgstr "Bot Left Y"

#: appTools/ToolCalibration.py:970
msgid "Bot Right X"
msgstr "Bot Right X"

#: appTools/ToolCalibration.py:980
msgid "Bot Right Y"
msgstr "Bot Right Y"

#: appTools/ToolCalibration.py:995
msgid "Top Left X"
msgstr "Top Left X"

#: appTools/ToolCalibration.py:1004
msgid "Top Left Y"
msgstr "Top Left Y"

#: appTools/ToolCalibration.py:1019
msgid "Top Right X"
msgstr "Top Right X"

#: appTools/ToolCalibration.py:1029
msgid "Top Right Y"
msgstr "Top Right Y"

#: appTools/ToolCalibration.py:1062
msgid "Get Points"
msgstr "Get Points"

#: appTools/ToolCalibration.py:1064
msgid ""
"Pick four points by clicking on canvas if the source choice\n"
"is 'free' or inside the object geometry if the source is 'object'.\n"
"Those four points should be in the four squares of\n"
"the object."
msgstr ""
"Pick four points by clicking on canvas if the source choice\n"
"is 'free' or inside the object geometry if the source is 'object'.\n"
"Those four points should be in the four squares of\n"
"the object."

#: appTools/ToolCalibration.py:1085
msgid "STEP 2: Verification GCode"
msgstr "STEP 2: Verification GCode"

#: appTools/ToolCalibration.py:1087 appTools/ToolCalibration.py:1100
msgid ""
"Generate GCode file to locate and align the PCB by using\n"
"the four points acquired above.\n"
"The points sequence is:\n"
"- first point -> set the origin\n"
"- second point -> alignment point. Can be: top-left or bottom-right.\n"
"- third point -> check point. Can be: top-left or bottom-right.\n"
"- forth point -> final verification point. Just for evaluation."
msgstr ""
"Generate GCode file to locate and align the PCB by using\n"
"the four points acquired above.\n"
"The points sequence is:\n"
"- first point -> set the origin\n"
"- second point -> alignment point. Can be: top-left or bottom-right.\n"
"- third point -> check point. Can be: top-left or bottom-right.\n"
"- forth point -> final verification point. Just for evaluation."

#: appTools/ToolCalibration.py:1098 appTools/ToolSolderPaste.py:1421
msgid "Generate GCode"
msgstr "Generate GCode"

#: appTools/ToolCalibration.py:1124
msgid "STEP 3: Adjustments"
msgstr "STEP 3: Adjustments"

#: appTools/ToolCalibration.py:1126 appTools/ToolCalibration.py:1135
msgid ""
"Calculate Scale and Skew factors based on the differences (delta)\n"
"found when checking the PCB pattern. The differences must be filled\n"
"in the fields Found (Delta)."
msgstr ""
"Calculate Scale and Skew factors based on the differences (delta)\n"
"found when checking the PCB pattern. The differences must be filled\n"
"in the fields Found (Delta)."

#: appTools/ToolCalibration.py:1133
msgid "Calculate Factors"
msgstr "Calculate Factors"

#: appTools/ToolCalibration.py:1155
msgid "STEP 4: Adjusted GCode"
msgstr "STEP 4: Adjusted GCode"

#: appTools/ToolCalibration.py:1157
msgid ""
"Generate verification GCode file adjusted with\n"
"the factors above."
msgstr ""
"Generate verification GCode file adjusted with\n"
"the factors above."

#: appTools/ToolCalibration.py:1162
msgid "Scale Factor X:"
msgstr "Scale Factor X:"

#: appTools/ToolCalibration.py:1164
msgid "Factor for Scale action over X axis."
msgstr "Factor for Scale action over X axis."

#: appTools/ToolCalibration.py:1174
msgid "Scale Factor Y:"
msgstr "Scale Factor Y:"

#: appTools/ToolCalibration.py:1176
msgid "Factor for Scale action over Y axis."
msgstr "Factor for Scale action over Y axis."

#: appTools/ToolCalibration.py:1186
msgid "Apply Scale Factors"
msgstr "Apply Scale Factors"

#: appTools/ToolCalibration.py:1188
msgid "Apply Scale factors on the calibration points."
msgstr "Apply Scale factors on the calibration points."

#: appTools/ToolCalibration.py:1198
msgid "Skew Angle X:"
msgstr "Skew Angle X:"

#: appTools/ToolCalibration.py:1211
msgid "Skew Angle Y:"
msgstr "Skew Angle Y:"

#: appTools/ToolCalibration.py:1224
msgid "Apply Skew Factors"
msgstr "Apply Skew Factors"

#: appTools/ToolCalibration.py:1226
msgid "Apply Skew factors on the calibration points."
msgstr "Apply Skew factors on the calibration points."

#: appTools/ToolCalibration.py:1295
msgid "Generate Adjusted GCode"
msgstr "Generate Adjusted GCode"

#: appTools/ToolCalibration.py:1297
msgid ""
"Generate verification GCode file adjusted with\n"
"the factors set above.\n"
"The GCode parameters can be readjusted\n"
"before clicking this button."
msgstr ""
"Generate verification GCode file adjusted with\n"
"the factors set above.\n"
"The GCode parameters can be readjusted\n"
"before clicking this button."

#: appTools/ToolCalibration.py:1318
msgid "STEP 5: Calibrate FlatCAM Objects"
msgstr "STEP 5: Calibrate FlatCAM Objects"

#: appTools/ToolCalibration.py:1320
msgid ""
"Adjust the FlatCAM objects\n"
"with the factors determined and verified above."
msgstr ""
"Adjust the FlatCAM objects\n"
"with the factors determined and verified above."

#: appTools/ToolCalibration.py:1332
msgid "Adjusted object type"
msgstr "Adjusted object type"

#: appTools/ToolCalibration.py:1333
msgid "Type of the FlatCAM Object to be adjusted."
msgstr "Type of the FlatCAM Object to be adjusted."

#: appTools/ToolCalibration.py:1346
msgid "Adjusted object selection"
msgstr "Adjusted object selection"

#: appTools/ToolCalibration.py:1348
msgid "The FlatCAM Object to be adjusted."
msgstr "The FlatCAM Object to be adjusted."

#: appTools/ToolCalibration.py:1355
msgid "Calibrate"
msgstr "Calibrate"

#: appTools/ToolCalibration.py:1357
msgid ""
"Adjust (scale and/or skew) the objects\n"
"with the factors determined above."
msgstr ""
"Adjust (scale and/or skew) the objects\n"
"with the factors determined above."

#: appTools/ToolCopperThieving.py:186 appTools/ToolCopperThieving.py:211
msgid "Lines Grid works only for 'itself' reference ..."
msgstr "Lines Grid works only for 'itself' reference ..."

#: appTools/ToolCopperThieving.py:197
msgid "Solid fill selected."
msgstr "Solid fill selected."

#: appTools/ToolCopperThieving.py:202
msgid "Dots grid fill selected."
msgstr "Dots grid fill selected."

#: appTools/ToolCopperThieving.py:207
msgid "Squares grid fill selected."
msgstr "Squares grid fill selected."

#: appTools/ToolCopperThieving.py:229 appTools/ToolCopperThieving.py:327
#: appTools/ToolCopperThieving.py:946 appTools/ToolCorners.py:127
#: appTools/ToolCorners.py:350 appTools/ToolDblSided.py:307
#: appTools/ToolExtractDrills.py:141 appTools/ToolFiducials.py:191
#: appTools/ToolFiducials.py:482 appTools/ToolOptimal.py:138
#: appTools/ToolPunchGerber.py:381 appTools/ToolQRCode.py:158
msgid "There is no Gerber object loaded ..."
msgstr "There is no Gerber object loaded ..."

#: appTools/ToolCopperThieving.py:242 appTools/ToolCopperThieving.py:847
msgid "Append geometry"
msgstr "Append geometry"

#: appTools/ToolCopperThieving.py:297 appTools/ToolCopperThieving.py:898
#: appTools/ToolCopperThieving.py:1091
msgid "Append source file"
msgstr "Append source file"

#: appTools/ToolCopperThieving.py:310 appTools/ToolCopperThieving.py:911
msgid "Copper Thieving Tool done."
msgstr "Copper Thieving Tool done."

#: appTools/ToolCopperThieving.py:337 appTools/ToolCopperThieving.py:357
#: appTools/ToolCutOut.py:551 appTools/ToolCutOut.py:927
#: appTools/ToolDrilling.py:726 appTools/ToolDrilling.py:1582
#: appTools/ToolEtchCompensation.py:152 appTools/ToolInvertGerber.py:99
#: appTools/ToolIsolation.py:972 appTools/ToolIsolation.py:1037
#: appTools/ToolIsolation.py:1441 appTools/ToolIsolation.py:1468
#: appTools/ToolMilling.py:424 appTools/ToolMilling.py:639
#: appTools/ToolMilling.py:1322 appTools/ToolNCC.py:909 appTools/ToolNCC.py:978
#: appTools/ToolNCC.py:1410 appTools/ToolNCC.py:1460 appTools/ToolNCC.py:1493
#: appTools/ToolPaint.py:1095 appTools/ToolPanelize.py:192
#: appTools/ToolPanelize.py:206 appTools/ToolSub.py:163 appTools/ToolSub.py:181
#: appTools/ToolSub.py:391 appTools/ToolSub.py:404
#: tclCommands/TclCommandCopperClear.py:97 tclCommands/TclCommandPaint.py:99
msgid "Could not retrieve object"
msgstr "Could not retrieve object"

#: appTools/ToolCopperThieving.py:385
msgid "Click the end point of the filling area."
msgstr "Click the end point of the filling area."

#: appTools/ToolCopperThieving.py:510
msgid "Copper Thieving Tool started. Reading parameters."
msgstr "Copper Thieving Tool started. Reading parameters."

#: appTools/ToolCopperThieving.py:536
msgid "Copper Thieving Tool. Preparing isolation polygons."
msgstr "Copper Thieving Tool. Preparing isolation polygons."

#: appTools/ToolCopperThieving.py:582
msgid "Copper Thieving Tool. Preparing areas to fill with copper."
msgstr "Copper Thieving Tool. Preparing areas to fill with copper."

#: appTools/ToolCopperThieving.py:593 appTools/ToolFilm.py:639
#: appTools/ToolFilm.py:883 appTools/ToolRulesCheck.py:627
msgid "Working..."
msgstr "Working..."

#: appTools/ToolCopperThieving.py:626
msgid "Geometry not supported for bounding box"
msgstr "Geometry not supported for bounding box"

#: appTools/ToolCopperThieving.py:632 appTools/ToolNCC.py:1784
#: appTools/ToolNCC.py:1839 appTools/ToolNCC.py:2833 appTools/ToolPaint.py:2468
msgid "No object available."
msgstr "No object available."

#: appTools/ToolCopperThieving.py:669 appTools/ToolNCC.py:1809
#: appTools/ToolNCC.py:1862 appTools/ToolNCC.py:2875
msgid "The reference object type is not supported."
msgstr "The reference object type is not supported."

#: appTools/ToolCopperThieving.py:674
msgid "Copper Thieving Tool. Appending new geometry and buffering."
msgstr "Copper Thieving Tool. Appending new geometry and buffering."

#: appTools/ToolCopperThieving.py:710
msgid "Create geometry"
msgstr "Create geometry"

#: appTools/ToolCopperThieving.py:922 appTools/ToolCopperThieving.py:926
msgid "P-Plating Mask"
msgstr "P-Plating Mask"

#: appTools/ToolCopperThieving.py:949
msgid "Append PP-M geometry"
msgstr "Append PP-M geometry"

#: appTools/ToolCopperThieving.py:1111
msgid "Generating Pattern Plating Mask done."
msgstr "Generating Pattern Plating Mask done."

#: appTools/ToolCopperThieving.py:1154
msgid "Copper Thieving Tool exit."
msgstr "Copper Thieving Tool exit."

#: appTools/ToolCopperThieving.py:1245 appTools/ToolFiducials.py:904
msgid "Gerber Object to which will be added a copper thieving."
msgstr "Gerber Object to which will be added a copper thieving."

#: appTools/ToolCopperThieving.py:1271
msgid ""
"This set the distance between the copper thieving components\n"
"(the polygon fill may be split in multiple polygons)\n"
"and the copper traces in the Gerber file."
msgstr ""
"This set the distance between the copper thieving components\n"
"(the polygon fill may be split in multiple polygons)\n"
"and the copper traces in the Gerber file."

#: appTools/ToolCopperThieving.py:1309 appTools/ToolCopperThieving.py:1657
msgid "mm"
msgstr "mm"

#: appTools/ToolCopperThieving.py:1311 appTools/ToolCopperThieving.py:1659
msgid "in"
msgstr "in"

#: appTools/ToolCopperThieving.py:1327
msgid ""
"- 'Itself' - the copper thieving extent is based on the object extent.\n"
"- 'Area Selection' - left mouse click to start selection of the area to be "
"filled.\n"
"- 'Reference Object' - will do copper thieving within the area specified by "
"another object."
msgstr ""
"- 'Itself' - the copper thieving extent is based on the object extent.\n"
"- 'Area Selection' - left mouse click to start selection of the area to be "
"filled.\n"
"- 'Reference Object' - will do copper thieving within the area specified by "
"another object."

#: appTools/ToolCopperThieving.py:1334 appTools/ToolIsolation.py:3490
#: appTools/ToolNCC.py:4425 appTools/ToolPaint.py:3126
msgid "Ref. Type"
msgstr "Ref. Type"

#: appTools/ToolCopperThieving.py:1336
msgid ""
"The type of FlatCAM object to be used as copper thieving reference.\n"
"It can be Gerber, Excellon or Geometry."
msgstr ""
"The type of FlatCAM object to be used as copper thieving reference.\n"
"It can be Gerber, Excellon or Geometry."

#: appTools/ToolCopperThieving.py:1345 appTools/ToolIsolation.py:3501
#: appTools/ToolNCC.py:4435 appTools/ToolPaint.py:3136
msgid "Ref. Object"
msgstr "Ref. Object"

#: appTools/ToolCopperThieving.py:1347 appTools/ToolIsolation.py:3503
#: appTools/ToolNCC.py:4437 appTools/ToolPaint.py:3138
msgid "The FlatCAM object to be used as non copper clearing reference."
msgstr "The FlatCAM object to be used as non copper clearing reference."

#: appTools/ToolCopperThieving.py:1524
msgid "Insert Copper thieving"
msgstr "Insert Copper thieving"

#: appTools/ToolCopperThieving.py:1527
msgid ""
"Will add a polygon (may be split in multiple parts)\n"
"that will surround the actual Gerber traces at a certain distance."
msgstr ""
"Will add a polygon (may be split in multiple parts)\n"
"that will surround the actual Gerber traces at a certain distance."

#: appTools/ToolCopperThieving.py:1586
msgid "Insert Robber Bar"
msgstr "Insert Robber Bar"

#: appTools/ToolCopperThieving.py:1589
msgid ""
"Will add a polygon with a defined thickness\n"
"that will surround the actual Gerber object\n"
"at a certain distance.\n"
"Required when doing holes pattern plating."
msgstr ""
"Will add a polygon with a defined thickness\n"
"that will surround the actual Gerber object\n"
"at a certain distance.\n"
"Required when doing holes pattern plating."

#: appTools/ToolCopperThieving.py:1613
msgid "Select Soldermask object"
msgstr "Select Soldermask object"

#: appTools/ToolCopperThieving.py:1615
msgid ""
"Gerber Object with the soldermask.\n"
"It will be used as a base for\n"
"the pattern plating mask."
msgstr ""
"Gerber Object with the soldermask.\n"
"It will be used as a base for\n"
"the pattern plating mask."

#: appTools/ToolCopperThieving.py:1644
msgid "Plated area"
msgstr "Plated area"

#: appTools/ToolCopperThieving.py:1646
msgid ""
"The area to be plated by pattern plating.\n"
"Basically is made from the openings in the plating mask.\n"
"\n"
"<<WARNING>> - the calculated area is actually a bit larger\n"
"due of the fact that the soldermask openings are by design\n"
"a bit larger than the copper pads, and this area is\n"
"calculated from the soldermask openings."
msgstr ""
"The area to be plated by pattern plating.\n"
"Basically is made from the openings in the plating mask.\n"
"\n"
"<<WARNING>> - the calculated area is actually a bit larger\n"
"due of the fact that the soldermask openings are by design\n"
"a bit larger than the copper pads, and this area is\n"
"calculated from the soldermask openings."

#: appTools/ToolCopperThieving.py:1680
msgid "Generate pattern plating mask"
msgstr "Generate pattern plating mask"

#: appTools/ToolCopperThieving.py:1683
msgid ""
"Will add to the soldermask gerber geometry\n"
"the geometries of the copper thieving and/or\n"
"the robber bar if those were generated."
msgstr ""
"Will add to the soldermask gerber geometry\n"
"the geometries of the copper thieving and/or\n"
"the robber bar if those were generated."

#: appTools/ToolCorners.py:92
msgid "Corners Tool"
msgstr "Corners Tool"

#: appTools/ToolCorners.py:168 appTools/ToolCorners.py:355
msgid "Please select at least a location"
msgstr "Please select at least a location"

#: appTools/ToolCorners.py:332
msgid "The tool diameter is zero."
msgstr "The tool diameter is zero."

#: appTools/ToolCorners.py:415
msgid "Excellon object with corner drills created."
msgstr "Excellon object with corner drills created."

#: appTools/ToolCorners.py:450
msgid "A Gerber object with corner markers was created."
msgstr "A Gerber object with corner markers was created."

#: appTools/ToolCorners.py:477
msgid "The Gerber object to which will be added corner markers."
msgstr "The Gerber object to which will be added corner markers."

#: appTools/ToolCorners.py:493
msgid "Locations"
msgstr "Locations"

#: appTools/ToolCorners.py:495
msgid "Locations where to place corner markers."
msgstr "Locations where to place corner markers."

#: appTools/ToolCorners.py:508 appTools/ToolFiducials.py:735
msgid "Top Right"
msgstr "Top Right"

#: appTools/ToolCorners.py:525
msgid "Toggle ALL"
msgstr "Toggle ALL"

#: appTools/ToolCorners.py:605
msgid "Add Marker"
msgstr "Add Marker"

#: appTools/ToolCorners.py:608
msgid "Will add corner markers to the selected Gerber file."
msgstr "Will add corner markers to the selected Gerber file."

#: appTools/ToolCorners.py:624
msgid "Drills in Corners"
msgstr "Drills in Corners"

#: appTools/ToolCorners.py:641 appTools/ToolDblSided.py:928
msgid "Create Excellon Object"
msgstr "Create Excellon Object"

#: appTools/ToolCorners.py:644
msgid "Will add drill holes in the center of the markers."
msgstr "Will add drill holes in the center of the markers."

#: appTools/ToolCutOut.py:388
msgid "Updated tool from Tools Database."
msgstr "Updated tool from Tools Database."

#: appTools/ToolCutOut.py:457
msgid "Default tool added."
msgstr "Default tool added."

#: appTools/ToolCutOut.py:471 appTools/ToolIsolation.py:2680
#: appTools/ToolNCC.py:3820 appTools/ToolPaint.py:2636 app_Main.py:5924
#: app_Main.py:5944
msgid "Selected tool can't be used here. Pick another."
msgstr "Selected tool can't be used here. Pick another."

#: appTools/ToolCutOut.py:494
msgid "Tool updated from Tools Database."
msgstr "Tool updated from Tools Database."

#: appTools/ToolCutOut.py:556
msgid ""
"There is no object selected for Cutout.\n"
"Select one and try again."
msgstr ""
"There is no object selected for Cutout.\n"
"Select one and try again."

#: appTools/ToolCutOut.py:562 appTools/ToolCutOut.py:936
#: appTools/ToolCutOut.py:1314 appTools/ToolCutOut.py:1445
#: tclCommands/TclCommandGeoCutout.py:184
msgid "Tool Diameter is zero value. Change it to a positive real number."
msgstr "Tool Diameter is zero value. Change it to a positive real number."

#: appTools/ToolCutOut.py:575 appTools/ToolCutOut.py:950
msgid "Number of gaps value is missing. Add it and retry."
msgstr "Number of gaps value is missing. Add it and retry."

#: appTools/ToolCutOut.py:580 appTools/ToolCutOut.py:954
msgid ""
"Gaps value can be only one of: 'None', 'lr', 'tb', '2lr', '2tb', 4 or 8. "
"Fill in a correct value and retry. "
msgstr ""
"Gaps value can be only one of: 'None', 'lr', 'tb', '2lr', '2tb', 4 or 8. "
"Fill in a correct value and retry. "

#: appTools/ToolCutOut.py:901 appTools/ToolCutOut.py:1274
#: appTools/ToolCutOut.py:1632
msgid "Mouse bites failed."
msgstr "Mouse bites failed."

#: appTools/ToolCutOut.py:909
msgid "Any form CutOut operation finished."
msgstr "Any form CutOut operation finished."

#: appTools/ToolCutOut.py:931 appTools/ToolDrilling.py:1586
#: appTools/ToolEtchCompensation.py:158 appTools/ToolInvertGerber.py:105
#: appTools/ToolIsolation.py:976 appTools/ToolIsolation.py:1041
#: appTools/ToolIsolation.py:1445 appTools/ToolIsolation.py:1472
#: appTools/ToolMilling.py:1326 appTools/ToolNCC.py:913 appTools/ToolNCC.py:982
#: appTools/ToolNCC.py:1414 appTools/ToolPaint.py:1012
#: appTools/ToolPanelize.py:197 tclCommands/TclCommandBbox.py:71
#: tclCommands/TclCommandNregions.py:71
msgid "Object not found"
msgstr "Object not found"

#: appTools/ToolCutOut.py:1124 appTools/ToolCutOut.py:1197
msgid "Rectangular cutout with negative margin is not possible."
msgstr "Rectangular cutout with negative margin is not possible."

#: appTools/ToolCutOut.py:1282
msgid "Rectangular CutOut operation finished."
msgstr "Rectangular CutOut operation finished."

#: appTools/ToolCutOut.py:1298 appTools/ToolCutOut.py:1330
msgid "Could not retrieve Geometry object"
msgstr "Could not retrieve Geometry object"

#: appTools/ToolCutOut.py:1303 appTools/ToolCutOut.py:1358
msgid "Geometry object for manual cutout not found"
msgstr "Geometry object for manual cutout not found"

#: appTools/ToolCutOut.py:1306
msgid ""
"Click on the selected geometry object perimeter to create a bridge gap ..."
msgstr ""
"Click on the selected geometry object perimeter to create a bridge gap ..."

#: appTools/ToolCutOut.py:1394
msgid "No tool in the Geometry object."
msgstr "No tool in the Geometry object."

#: appTools/ToolCutOut.py:1415
msgid ""
"Added manual Bridge Gap. Left click to add another or right click to finish."
msgstr ""
"Added manual Bridge Gap. Left click to add another or right click to finish."

#: appTools/ToolCutOut.py:1427
msgid "Could not retrieve Gerber object"
msgstr "Could not retrieve Gerber object"

#: appTools/ToolCutOut.py:1432
msgid ""
"There is no Gerber object selected for Cutout.\n"
"Select one and try again."
msgstr ""
"There is no Gerber object selected for Cutout.\n"
"Select one and try again."

#: appTools/ToolCutOut.py:1438
msgid ""
"The selected object has to be of Gerber type.\n"
"Select a Gerber file and try again."
msgstr ""
"The selected object has to be of Gerber type.\n"
"Select a Gerber file and try again."

#: appTools/ToolCutOut.py:1473
msgid "Geometry not supported for cutout"
msgstr "Geometry not supported for cutout"

#: appTools/ToolCutOut.py:1545
msgid "Making manual bridge gap..."
msgstr "Making manual bridge gap..."

#: appTools/ToolCutOut.py:1636
msgid "Finished manual adding of gaps."
msgstr "Finished manual adding of gaps."

#: appTools/ToolCutOut.py:1978
msgid "Cutout PCB"
msgstr "Cutout PCB"

#: appTools/ToolCutOut.py:2004 appTools/ToolDblSided.py:516
#: appTools/ToolPanelize.py:653
msgid "Source Object"
msgstr "Source Object"

#: appTools/ToolCutOut.py:2005
msgid "Object to be cutout"
msgstr "Object to be cutout"

#: appTools/ToolCutOut.py:2010
msgid "Kind"
msgstr "Kind"

#: appTools/ToolCutOut.py:2032
msgid ""
"Specify the type of object to be cutout.\n"
"It can be of type: Gerber or Geometry.\n"
"What is selected here will dictate the kind\n"
"of objects that will populate the 'Object' combobox."
msgstr ""
"Specify the type of object to be cutout.\n"
"It can be of type: Gerber or Geometry.\n"
"What is selected here will dictate the kind\n"
"of objects that will populate the 'Object' combobox."

#: appTools/ToolCutOut.py:2091 appTools/ToolIsolation.py:3230
#: appTools/ToolNCC.py:4112 appTools/ToolPaint.py:2919
msgid ""
"Add a new tool to the Tool Table\n"
"with the diameter specified above.\n"
"This is done by a background search\n"
"in the Tools Database. If nothing is found\n"
"in the Tools DB then a default tool is added."
msgstr ""
"Add a new tool to the Tool Table\n"
"with the diameter specified above.\n"
"This is done by a background search\n"
"in the Tools Database. If nothing is found\n"
"in the Tools DB then a default tool is added."

#: appTools/ToolCutOut.py:2117
msgid "Tool Parameters"
msgstr "Tool Parameters"

#: appTools/ToolCutOut.py:2266
msgid "Automatic"
msgstr "Automatic"

#: appTools/ToolCutOut.py:2266 appTools/ToolCutOut.py:2341
msgid "Bridge Gaps"
msgstr "Bridge Gaps"

#: appTools/ToolCutOut.py:2268
msgid "This section handle creation of automatic bridge gaps."
msgstr "This section handle creation of automatic bridge gaps."

#: appTools/ToolCutOut.py:2307
msgid ""
"Cutout the selected object.\n"
"The cutout shape can be of any shape.\n"
"Useful when the PCB has a non-rectangular shape."
msgstr ""
"Cutout the selected object.\n"
"The cutout shape can be of any shape.\n"
"Useful when the PCB has a non-rectangular shape."

#: appTools/ToolCutOut.py:2322
msgid ""
"Cutout the selected object.\n"
"The resulting cutout shape is\n"
"always a rectangle shape and it will be\n"
"the bounding box of the Object."
msgstr ""
"Cutout the selected object.\n"
"The resulting cutout shape is\n"
"always a rectangle shape and it will be\n"
"the bounding box of the Object."

#: appTools/ToolCutOut.py:2343
msgid ""
"This section handle creation of manual bridge gaps.\n"
"This is done by mouse clicking on the perimeter of the\n"
"Geometry object that is used as a cutout object. "
msgstr ""
"This section handle creation of manual bridge gaps.\n"
"This is done by mouse clicking on the perimeter of the\n"
"Geometry object that is used as a cutout object. "

#: appTools/ToolCutOut.py:2359
msgid "Generate Manual Geometry"
msgstr "Generate Manual Geometry"

#: appTools/ToolCutOut.py:2362
msgid ""
"If the object to be cutout is a Gerber\n"
"first create a Geometry that surrounds it,\n"
"to be used as the cutout, if one doesn't exist yet.\n"
"Select the source Gerber file in the top object combobox."
msgstr ""
"If the object to be cutout is a Gerber\n"
"first create a Geometry that surrounds it,\n"
"to be used as the cutout, if one doesn't exist yet.\n"
"Select the source Gerber file in the top object combobox."

#: appTools/ToolCutOut.py:2382
msgid "Manual cutout Geometry"
msgstr "Manual cutout Geometry"

#: appTools/ToolCutOut.py:2384
msgid "Geometry object used to create the manual cutout."
msgstr "Geometry object used to create the manual cutout."

#: appTools/ToolCutOut.py:2391
msgid "Manual Add Bridge Gaps"
msgstr "Manual Add Bridge Gaps"

#: appTools/ToolCutOut.py:2394
msgid ""
"Use the left mouse button (LMB) click\n"
"to create a bridge gap to separate the PCB from\n"
"the surrounding material.\n"
"The LMB click has to be done on the perimeter of\n"
"the Geometry object used as a cutout geometry."
msgstr ""
"Use the left mouse button (LMB) click\n"
"to create a bridge gap to separate the PCB from\n"
"the surrounding material.\n"
"The LMB click has to be done on the perimeter of\n"
"the Geometry object used as a cutout geometry."

#: appTools/ToolDblSided.py:107
msgid "2-Sided Tool"
msgstr "2-Sided Tool"

#: appTools/ToolDblSided.py:160
msgid ""
"'Point' reference is selected and 'Point' coordinates are missing. Add them "
"and retry."
msgstr ""
"'Point' reference is selected and 'Point' coordinates are missing. Add them "
"and retry."

#: appTools/ToolDblSided.py:169
msgid "There is no Box reference object loaded. Load one and retry."
msgstr "There is no Box reference object loaded. Load one and retry."

#: appTools/ToolDblSided.py:181
msgid "No value or wrong format in Drill Dia entry. Add it and retry."
msgstr "No value or wrong format in Drill Dia entry. Add it and retry."

#: appTools/ToolDblSided.py:193
msgid "There are no Alignment Drill Coordinates to use. Add them and retry."
msgstr "There are no Alignment Drill Coordinates to use. Add them and retry."

#: appTools/ToolDblSided.py:212
msgid "Alignment Drills"
msgstr "Alignment Drills"

#: appTools/ToolDblSided.py:216
msgid "Excellon object with alignment drills created..."
msgstr "Excellon object with alignment drills created..."

#: appTools/ToolDblSided.py:227 appTools/ToolPunchGerber.py:405
msgid "There is no Excellon object loaded ..."
msgstr "There is no Excellon object loaded ..."

#: appTools/ToolDblSided.py:239
msgid "Click on canvas within the desired Excellon drill hole"
msgstr "Click on canvas within the desired Excellon drill hole"

#: appTools/ToolDblSided.py:283
msgid "Mirror reference point set."
msgstr "Mirror reference point set."

#: appTools/ToolDblSided.py:311
msgid "Only Gerber, Excellon and Geometry objects can be mirrored."
msgstr "Only Gerber, Excellon and Geometry objects can be mirrored."

#: appTools/ToolDblSided.py:323
msgid "There is no Box object loaded ..."
msgstr "There is no Box object loaded ..."

#: appTools/ToolDblSided.py:333
msgid ""
"There are no Point coordinates in the Point field. Add coords and try "
"again ..."
msgstr ""
"There are no Point coordinates in the Point field. Add coords and try "
"again ..."

#: appTools/ToolDblSided.py:340 camlib.py:2401
msgid "Object was mirrored"
msgstr "Object was mirrored"

#: appTools/ToolDblSided.py:406 app_Main.py:4766 app_Main.py:4921
msgid "Failed. No object(s) selected..."
msgstr "Failed. No object(s) selected..."

#: appTools/ToolDblSided.py:490
msgid "2-Sided PCB"
msgstr "2-Sided PCB"

#: appTools/ToolDblSided.py:517
msgid "Objects to be mirrored"
msgstr "Objects to be mirrored"

#: appTools/ToolDblSided.py:524
msgid "Select the type of application object to be processed in this tool."
msgstr "Select the type of application object to be processed in this tool."

#: appTools/ToolDblSided.py:558
msgid "Bounds Values"
msgstr "Bounds Values"

#: appTools/ToolDblSided.py:560
msgid ""
"Select on canvas the object(s)\n"
"for which to calculate bounds values."
msgstr ""
"Select on canvas the object(s)\n"
"for which to calculate bounds values."

#: appTools/ToolDblSided.py:570
msgid "X min"
msgstr "X min"

#: appTools/ToolDblSided.py:572 appTools/ToolDblSided.py:586
msgid "Minimum location."
msgstr "Minimum location."

#: appTools/ToolDblSided.py:584
msgid "Y min"
msgstr "Y min"

#: appTools/ToolDblSided.py:598
msgid "X max"
msgstr "X max"

#: appTools/ToolDblSided.py:600 appTools/ToolDblSided.py:614
msgid "Maximum location."
msgstr "Maximum location."

#: appTools/ToolDblSided.py:612
msgid "Y max"
msgstr "Y max"

#: appTools/ToolDblSided.py:623
msgid "Center point coordinates"
msgstr "Center point coordinates"

#: appTools/ToolDblSided.py:625
msgid "Centroid"
msgstr "Centroid"

#: appTools/ToolDblSided.py:627
msgid ""
"The center point location for the rectangular\n"
"bounding shape. Centroid. Format is (x, y)."
msgstr ""
"The center point location for the rectangular\n"
"bounding shape. Centroid. Format is (x, y)."

#: appTools/ToolDblSided.py:636
msgid "Calculate Bounds Values"
msgstr "Calculate Bounds Values"

#: appTools/ToolDblSided.py:638
msgid ""
"Calculate the enveloping rectangular shape coordinates,\n"
"for the selection of objects.\n"
"The envelope shape is parallel with the X, Y axis."
msgstr ""
"Calculate the enveloping rectangular shape coordinates,\n"
"for the selection of objects.\n"
"The envelope shape is parallel with the X, Y axis."

#: appTools/ToolDblSided.py:663
msgid "Mirror Operation"
msgstr "Mirror Operation"

#: appTools/ToolDblSided.py:664
msgid "Parameters for the mirror operation"
msgstr "Parameters for the mirror operation"

#: appTools/ToolDblSided.py:686
msgid ""
"The coordinates used as reference for the mirror operation.\n"
"Can be:\n"
"- Point -> a set of coordinates (x,y) around which the object is mirrored\n"
"- Box -> a set of coordinates (x, y) obtained from the center of the\n"
"bounding box of another object selected below\n"
"- Hole Snap -> a point defined by the center of a drill hole in a Excellon "
"object"
msgstr ""
"The coordinates used as reference for the mirror operation.\n"
"Can be:\n"
"- Point -> a set of coordinates (x,y) around which the object is mirrored\n"
"- Box -> a set of coordinates (x, y) obtained from the center of the\n"
"bounding box of another object selected below\n"
"- Hole Snap -> a point defined by the center of a drill hole in a Excellon "
"object"

#: appTools/ToolDblSided.py:706
msgid "Point coordinates"
msgstr "Point coordinates"

#: appTools/ToolDblSided.py:712
msgid ""
"Add the coordinates in format <b>(x, y)</b> through which the mirroring "
"axis\n"
" selected in 'MIRROR AXIS' pass.\n"
"The (x, y) coordinates are captured by pressing SHIFT key\n"
"and left mouse button click on canvas or you can enter the coordinates "
"manually."
msgstr ""
"Add the coordinates in format <b>(x, y)</b> through which the mirroring "
"axis\n"
" selected in 'MIRROR AXIS' pass.\n"
"The (x, y) coordinates are captured by pressing SHIFT key\n"
"and left mouse button click on canvas or you can enter the coordinates "
"manually."

#: appTools/ToolDblSided.py:730
msgid "Object that holds holes that can be picked as reference for mirroring."
msgstr "Object that holds holes that can be picked as reference for mirroring."

#: appTools/ToolDblSided.py:745
msgid "Pick hole"
msgstr "Pick hole"

#: appTools/ToolDblSided.py:747
msgid ""
"Click inside a drill hole that belong to the selected Excellon object,\n"
"and the hole center coordinates will be copied to the Point field."
msgstr ""
"Click inside a drill hole that belong to the selected Excellon object,\n"
"and the hole center coordinates will be copied to the Point field."

#: appTools/ToolDblSided.py:763
msgid ""
"It can be of type: Gerber or Excellon or Geometry.\n"
"The coordinates of the center of the bounding box are used\n"
"as reference for mirror operation."
msgstr ""
"It can be of type: Gerber or Excellon or Geometry.\n"
"The coordinates of the center of the bounding box are used\n"
"as reference for mirror operation."

#: appTools/ToolDblSided.py:789
msgid "Mirror"
msgstr "Mirror"

#: appTools/ToolDblSided.py:792
msgid ""
"Mirrors (flips) the specified object around \n"
"the specified axis. Does not create a new \n"
"object, but modifies it."
msgstr ""
"Mirrors (flips) the specified object around \n"
"the specified axis. Does not create a new \n"
"object, but modifies it."

#: appTools/ToolDblSided.py:818
msgid "PCB Alignment"
msgstr "PCB Alignment"

#: appTools/ToolDblSided.py:820 appTools/ToolDblSided.py:931
msgid ""
"Creates an Excellon Object containing the\n"
"specified alignment holes and their mirror\n"
"images."
msgstr ""
"Creates an Excellon Object containing the\n"
"specified alignment holes and their mirror\n"
"images."

#: appTools/ToolDblSided.py:862 appTools/ToolDblSided.py:869
msgid ""
"The reference point used to create the second alignment drill\n"
"from the first alignment drill, by doing mirror.\n"
"It can be modified in the Mirror Parameters -> Reference section"
msgstr ""
"The reference point used to create the second alignment drill\n"
"from the first alignment drill, by doing mirror.\n"
"It can be modified in the Mirror Parameters -> Reference section"

#: appTools/ToolDblSided.py:882
msgid "Alignment Drill Coordinates"
msgstr "Alignment Drill Coordinates"

#: appTools/ToolDblSided.py:884
msgid ""
"Alignment holes (x1, y1), (x2, y2), ... on one side of the mirror axis. For "
"each set of (x, y) coordinates\n"
"entered here, a pair of drills will be created:\n"
"\n"
"- one drill at the coordinates from the field\n"
"- one drill in mirror position over the axis selected above in the 'Align "
"Axis'."
msgstr ""
"Alignment holes (x1, y1), (x2, y2), ... on one side of the mirror axis. For "
"each set of (x, y) coordinates\n"
"entered here, a pair of drills will be created:\n"
"\n"
"- one drill at the coordinates from the field\n"
"- one drill in mirror position over the axis selected above in the 'Align "
"Axis'."

#: appTools/ToolDblSided.py:892
msgid "Drill coordinates"
msgstr "Drill coordinates"

#: appTools/ToolDblSided.py:900
msgid ""
"Add alignment drill holes coordinates in the format: (x1, y1), (x2, "
"y2), ... \n"
"on one side of the alignment axis.\n"
"\n"
"The coordinates set can be obtained:\n"
"- press SHIFT key and left mouse clicking on canvas. Then click Add.\n"
"- press SHIFT key and left mouse clicking on canvas. Then Ctrl+V in the "
"field.\n"
"- press SHIFT key and left mouse clicking on canvas. Then RMB click in the "
"field and click Paste.\n"
"- by entering the coords manually in the format: (x1, y1), (x2, y2), ..."
msgstr ""
"Add alignment drill holes coordinates in the format: (x1, y1), (x2, "
"y2), ... \n"
"on one side of the alignment axis.\n"
"\n"
"The coordinates set can be obtained:\n"
"- press SHIFT key and left mouse clicking on canvas. Then click Add.\n"
"- press SHIFT key and left mouse clicking on canvas. Then Ctrl+V in the "
"field.\n"
"- press SHIFT key and left mouse clicking on canvas. Then RMB click in the "
"field and click Paste.\n"
"- by entering the coords manually in the format: (x1, y1), (x2, y2), ..."

#: appTools/ToolDblSided.py:915
msgid "Delete Last"
msgstr "Delete Last"

#: appTools/ToolDblSided.py:918
msgid "Delete the last coordinates tuple in the list."
msgstr "Delete the last coordinates tuple in the list."

#: appTools/ToolDistance.py:177
msgid "Working"
msgstr "Working"

#: appTools/ToolDistance.py:182
msgid "MEASURING: Click on the Start point ..."
msgstr "MEASURING: Click on the Start point ..."

#: appTools/ToolDistance.py:242 appTools/ToolDistance.py:649
#: appTools/ToolDistanceMin.py:302
msgid "Measure"
msgstr "Measure"

#: appTools/ToolDistance.py:292
msgid "Distance Tool finished."
msgstr "Distance Tool finished."

#: appTools/ToolDistance.py:364
msgid "Pads overlapped. Aborting."
msgstr "Pads overlapped. Aborting."

#: appTools/ToolDistance.py:393
msgid "Distance Tool cancelled."
msgstr "Distance Tool cancelled."

#: appTools/ToolDistance.py:398
msgid "MEASURING: Click on the Destination point ..."
msgstr "MEASURING: Click on the Destination point ..."

#: appTools/ToolDistance.py:407 appTools/ToolDistanceMin.py:197
msgid "MEASURING"
msgstr "MEASURING"

#: appTools/ToolDistance.py:408 appTools/ToolDistanceMin.py:198
msgid "Result"
msgstr "Result"

#: appTools/ToolDistance.py:564 appTools/ToolDistanceMin.py:238
msgid "Those are the units in which the distance is measured."
msgstr "Those are the units in which the distance is measured."

#: appTools/ToolDistance.py:565 appTools/ToolDistanceMin.py:239
msgid "METRIC (mm)"
msgstr "METRIC (mm)"

#: appTools/ToolDistance.py:565 appTools/ToolDistanceMin.py:239
msgid "INCH (in)"
msgstr "INCH (in)"

#: appTools/ToolDistance.py:571
msgid "Snap to center"
msgstr "Snap to center"

#: appTools/ToolDistance.py:573
msgid ""
"Mouse cursor will snap to the center of the pad/drill\n"
"when it is hovering over the geometry of the pad/drill."
msgstr ""
"Mouse cursor will snap to the center of the pad/drill\n"
"when it is hovering over the geometry of the pad/drill."

#: appTools/ToolDistance.py:583
msgid "Start Coords"
msgstr "Start Coords"

#: appTools/ToolDistance.py:584 appTools/ToolDistance.py:589
msgid "This is measuring Start point coordinates."
msgstr "This is measuring Start point coordinates."

#: appTools/ToolDistance.py:594
msgid "Stop Coords"
msgstr "Stop Coords"

#: appTools/ToolDistance.py:595 appTools/ToolDistance.py:600
msgid "This is the measuring Stop point coordinates."
msgstr "This is the measuring Stop point coordinates."

#: appTools/ToolDistance.py:605 appTools/ToolDistanceMin.py:250
msgid "Dx"
msgstr "Dx"

#: appTools/ToolDistance.py:606 appTools/ToolDistance.py:611
#: appTools/ToolDistanceMin.py:251 appTools/ToolDistanceMin.py:280
msgid "This is the distance measured over the X axis."
msgstr "This is the distance measured over the X axis."

#: appTools/ToolDistance.py:616 appTools/ToolDistanceMin.py:253
msgid "Dy"
msgstr "Dy"

#: appTools/ToolDistance.py:617 appTools/ToolDistance.py:622
#: appTools/ToolDistanceMin.py:254 appTools/ToolDistanceMin.py:285
msgid "This is the distance measured over the Y axis."
msgstr "This is the distance measured over the Y axis."

#: appTools/ToolDistance.py:628 appTools/ToolDistance.py:633
#: appTools/ToolDistanceMin.py:257 appTools/ToolDistanceMin.py:290
msgid "This is orientation angle of the measuring line."
msgstr "This is orientation angle of the measuring line."

#: appTools/ToolDistance.py:638 appTools/ToolDistanceMin.py:259
msgid "DISTANCE"
msgstr "DISTANCE"

#: appTools/ToolDistance.py:639 appTools/ToolDistance.py:644
msgid "This is the point to point Euclidian distance."
msgstr "This is the point to point Euclidian distance."

#: appTools/ToolDistanceMin.py:56 appTools/ToolDistanceMin.py:221
msgid "Minimum Distance Tool"
msgstr "Minimum Distance Tool"

#: appTools/ToolDistanceMin.py:67
msgid ""
"Select two objects and no more, to measure the distance between them ..."
msgstr ""
"Select two objects and no more, to measure the distance between them ..."

#: appTools/ToolDistanceMin.py:108 appTools/ToolDistanceMin.py:129
#: appTools/ToolDistanceMin.py:138 appTools/ToolDistanceMin.py:159
msgid "Select two objects and no more. Currently the selection has objects: "
msgstr "Select two objects and no more. Currently the selection has objects: "

#: appTools/ToolDistanceMin.py:206
msgid "Objects intersects or touch at"
msgstr "Objects intersects or touch at"

#: appTools/ToolDistanceMin.py:212
msgid "Jumped to the half point between the two selected objects"
msgstr "Jumped to the half point between the two selected objects"

#: appTools/ToolDistanceMin.py:242
msgid "First object point"
msgstr "First object point"

#: appTools/ToolDistanceMin.py:243 appTools/ToolDistanceMin.py:268
msgid ""
"This is first object point coordinates.\n"
"This is the start point for measuring distance."
msgstr ""
"This is first object point coordinates.\n"
"This is the start point for measuring distance."

#: appTools/ToolDistanceMin.py:246
msgid "Second object point"
msgstr "Second object point"

#: appTools/ToolDistanceMin.py:247 appTools/ToolDistanceMin.py:274
msgid ""
"This is second object point coordinates.\n"
"This is the end point for measuring distance."
msgstr ""
"This is second object point coordinates.\n"
"This is the end point for measuring distance."

#: appTools/ToolDistanceMin.py:260 appTools/ToolDistanceMin.py:295
msgid "This is the point to point Euclidean distance."
msgstr "This is the point to point Euclidean distance."

#: appTools/ToolDistanceMin.py:262
msgid "Half Point"
msgstr "Half Point"

#: appTools/ToolDistanceMin.py:263 appTools/ToolDistanceMin.py:300
msgid "This is the middle point of the point to point Euclidean distance."
msgstr "This is the middle point of the point to point Euclidean distance."

#: appTools/ToolDistanceMin.py:305
msgid "Jump to Half Point"
msgstr "Jump to Half Point"

#: appTools/ToolDrilling.py:1195 appTools/ToolIsolation.py:779
#: appTools/ToolMilling.py:962 appTools/ToolNCC.py:449
#: appTools/ToolPaint.py:379
msgid "Current Tool parameters were applied to all tools."
msgstr "Current Tool parameters were applied to all tools."

#: appTools/ToolDrilling.py:1600 camlib.py:4078
msgid "The loaded Excellon file has no drills"
msgstr "The loaded Excellon file has no drills"

#: appTools/ToolDrilling.py:1645 camlib.py:3996
msgid "Creating a list of points to drill..."
msgstr "Creating a list of points to drill..."

#: appTools/ToolDrilling.py:1652 camlib.py:4025
msgid "Failed. Drill points inside the exclusion zones."
msgstr "Failed. Drill points inside the exclusion zones."

#: appTools/ToolDrilling.py:1668 camlib.py:4068 camlib.py:5462 camlib.py:5871
msgid "Starting G-Code"
msgstr "Starting G-Code"

#: appTools/ToolDrilling.py:1673 appTools/ToolMilling.py:1355
msgid "Generating Excellon CNCJob..."
msgstr "Generating Excellon CNCJob..."

#: appTools/ToolDrilling.py:1791 camlib.py:3213 camlib.py:3643 camlib.py:5729
msgid "The Toolchange X,Y format has to be (x, y)."
msgstr "The Toolchange X,Y format has to be (x, y)."

#: appTools/ToolDrilling.py:2034 appTools/ToolMilling.py:1639
msgid "Excellon object for drilling/milling operation."
msgstr "Excellon object for drilling/milling operation."

#: appTools/ToolDrilling.py:2098
msgid "Search DB"
msgstr "Search DB"

#: appTools/ToolDrilling.py:2101
msgid ""
"Will search and try to replace the tools from Tools Table\n"
"with tools from DB that have a close diameter value."
msgstr ""
"Will search and try to replace the tools from Tools Table\n"
"with tools from DB that have a close diameter value."

#: appTools/ToolDrilling.py:2500 appTools/ToolMilling.py:2168
msgid ""
"The preprocessor JSON file that dictates\n"
"Gcode output for Excellon Objects."
msgstr ""
"The preprocessor JSON file that dictates\n"
"Gcode output for Excellon Objects."

#: appTools/ToolDrilling.py:2632 appTools/ToolMilling.py:2307
msgid ""
"Generate the CNC Job.\n"
"If milling then an additional Geometry object will be created.\n"
"Add / Select at least one tool in the tool-table.\n"
"Click the # header to select all, or Ctrl + LMB\n"
"for custom selection of tools."
msgstr ""
"Generate the CNC Job.\n"
"If milling then an additional Geometry object will be created.\n"
"Add / Select at least one tool in the tool-table.\n"
"Click the # header to select all, or Ctrl + LMB\n"
"for custom selection of tools."

#: appTools/ToolEtchCompensation.py:293 appTools/ToolInvertGerber.py:214
msgid "Gerber object that will be inverted."
msgstr "Gerber object that will be inverted."

#: appTools/ToolEtchCompensation.py:304
msgid "Utilities"
msgstr "Utilities"

#: appTools/ToolEtchCompensation.py:305
msgid "Conversion utilities"
msgstr "Conversion utilities"

#: appTools/ToolEtchCompensation.py:310
msgid "Oz to Microns"
msgstr "Oz to Microns"

#: appTools/ToolEtchCompensation.py:312
msgid ""
"Will convert from oz thickness to microns [um].\n"
"Can use formulas with operators: /, *, +, -, %, .\n"
"The real numbers use the dot decimals separator."
msgstr ""
"Will convert from oz thickness to microns [um].\n"
"Can use formulas with operators: /, *, +, -, %, .\n"
"The real numbers use the dot decimals separator."

#: appTools/ToolEtchCompensation.py:321
msgid "Oz value"
msgstr "Oz value"

#: appTools/ToolEtchCompensation.py:323 appTools/ToolEtchCompensation.py:344
msgid "Microns value"
msgstr "Microns value"

#: appTools/ToolEtchCompensation.py:331
msgid "Mils to Microns"
msgstr "Mils to Microns"

#: appTools/ToolEtchCompensation.py:333
msgid ""
"Will convert from mils to microns [um].\n"
"Can use formulas with operators: /, *, +, -, %, .\n"
"The real numbers use the dot decimals separator."
msgstr ""
"Will convert from mils to microns [um].\n"
"Can use formulas with operators: /, *, +, -, %, .\n"
"The real numbers use the dot decimals separator."

#: appTools/ToolEtchCompensation.py:342
msgid "Mils value"
msgstr "Mils value"

#: appTools/ToolEtchCompensation.py:357 appTools/ToolInvertGerber.py:226
msgid "Parameters for this tool"
msgstr "Parameters for this tool"

#: appTools/ToolEtchCompensation.py:362
msgid "Copper Thickness"
msgstr "Copper Thickness"

#: appTools/ToolEtchCompensation.py:364
msgid ""
"The thickness of the copper foil.\n"
"In microns [um]."
msgstr ""
"The thickness of the copper foil.\n"
"In microns [um]."

#: appTools/ToolEtchCompensation.py:375
msgid "Ratio"
msgstr "Ratio"

#: appTools/ToolEtchCompensation.py:377
msgid ""
"The ratio of lateral etch versus depth etch.\n"
"Can be:\n"
"- custom -> the user will enter a custom value\n"
"- preselection -> value which depends on a selection of etchants"
msgstr ""
"The ratio of lateral etch versus depth etch.\n"
"Can be:\n"
"- custom -> the user will enter a custom value\n"
"- preselection -> value which depends on a selection of etchants"

#: appTools/ToolEtchCompensation.py:383
msgid "Etch Factor"
msgstr "Etch Factor"

#: appTools/ToolEtchCompensation.py:384
msgid "Etchants list"
msgstr "Etchants list"

#: appTools/ToolEtchCompensation.py:385
msgid "Manual offset"
msgstr "Manual offset"

#: appTools/ToolEtchCompensation.py:392 appTools/ToolEtchCompensation.py:397
msgid "Etchants"
msgstr "Etchants"

#: appTools/ToolEtchCompensation.py:394
msgid "A list of etchants."
msgstr "A list of etchants."

#: appTools/ToolEtchCompensation.py:398
msgid "Alkaline baths"
msgstr "Alkaline baths"

#: appTools/ToolEtchCompensation.py:404
msgid "Etch factor"
msgstr "Etch factor"

#: appTools/ToolEtchCompensation.py:406
msgid ""
"The ratio between depth etch and lateral etch .\n"
"Accepts real numbers and formulas using the operators: /,*,+,-,%"
msgstr ""
"The ratio between depth etch and lateral etch .\n"
"Accepts real numbers and formulas using the operators: /,*,+,-,%"

#: appTools/ToolEtchCompensation.py:410
msgid "Real number or formula"
msgstr "Real number or formula"

#: appTools/ToolEtchCompensation.py:411
msgid "Etch_factor"
msgstr "Etch_factor"

#: appTools/ToolEtchCompensation.py:419
msgid ""
"Value with which to increase or decrease (buffer)\n"
"the copper features. In microns [um]."
msgstr ""
"Value with which to increase or decrease (buffer)\n"
"the copper features. In microns [um]."

#: appTools/ToolEtchCompensation.py:443
msgid "Compensate"
msgstr "Compensate"

#: appTools/ToolEtchCompensation.py:446
msgid ""
"Will increase the copper features thickness to compensate the lateral etch."
msgstr ""
"Will increase the copper features thickness to compensate the lateral etch."

#: appTools/ToolExtractDrills.py:189 appTools/ToolExtractDrills.py:279
#: appTools/ToolExtractDrills.py:369
msgid "No drills extracted. Try different parameters."
msgstr "No drills extracted. Try different parameters."

#: appTools/ToolExtractDrills.py:421 appTools/ToolExtractDrills.py:683
msgid "Extract Drills"
msgstr "Extract Drills"

#: appTools/ToolExtractDrills.py:455
msgid "Gerber from which to extract drill holes"
msgstr "Gerber from which to extract drill holes"

#: appTools/ToolExtractDrills.py:686
msgid "Extract drills from a given Gerber file."
msgstr "Extract drills from a given Gerber file."

#: appTools/ToolFiducials.py:245
msgid "Click to add first Fiducial. Bottom Left..."
msgstr "Click to add first Fiducial. Bottom Left..."

#: appTools/ToolFiducials.py:524
msgid "Click to add the last fiducial. Top Right..."
msgstr "Click to add the last fiducial. Top Right..."

#: appTools/ToolFiducials.py:529
msgid "Click to add the second fiducial. Top Left or Bottom Right..."
msgstr "Click to add the second fiducial. Top Left or Bottom Right..."

#: appTools/ToolFiducials.py:532 appTools/ToolFiducials.py:546
msgid "Done. All fiducials have been added."
msgstr "Done. All fiducials have been added."

#: appTools/ToolFiducials.py:625
msgid "Fiducials Tool exit."
msgstr "Fiducials Tool exit."

#: appTools/ToolFiducials.py:696
msgid "Fiducials Coordinates"
msgstr "Fiducials Coordinates"

#: appTools/ToolFiducials.py:698
msgid ""
"A table with the fiducial points coordinates,\n"
"in the format (x, y)."
msgstr ""
"A table with the fiducial points coordinates,\n"
"in the format (x, y)."

#: appTools/ToolFiducials.py:834
msgid ""
"- 'Auto' - automatic placement of fiducials in the corners of the bounding "
"box.\n"
" - 'Manual' - manual placement of fiducials."
msgstr ""
"- 'Auto' - automatic placement of fiducials in the corners of the bounding "
"box.\n"
" - 'Manual' - manual placement of fiducials."

#: appTools/ToolFiducials.py:880
msgid "Thickness of the line that makes the fiducial."
msgstr "Thickness of the line that makes the fiducial."

#: appTools/ToolFiducials.py:911
msgid "Add Fiducial"
msgstr "Add Fiducial"

#: appTools/ToolFiducials.py:914
msgid "Will add a polygon on the copper layer to serve as fiducial."
msgstr "Will add a polygon on the copper layer to serve as fiducial."

#: appTools/ToolFiducials.py:930
msgid "Soldermask Gerber"
msgstr "Soldermask Gerber"

#: appTools/ToolFiducials.py:932
msgid "The Soldermask Gerber object."
msgstr "The Soldermask Gerber object."

#: appTools/ToolFiducials.py:944
msgid "Add Soldermask Opening"
msgstr "Add Soldermask Opening"

#: appTools/ToolFiducials.py:946
msgid ""
"Will add a polygon on the soldermask layer\n"
"to serve as fiducial opening.\n"
"The diameter is always double of the diameter\n"
"for the copper fiducial."
msgstr ""
"Will add a polygon on the soldermask layer\n"
"to serve as fiducial opening.\n"
"The diameter is always double of the diameter\n"
"for the copper fiducial."

#: appTools/ToolFilm.py:160
msgid "No FlatCAM object selected. Load an object for Film and retry."
msgstr "No FlatCAM object selected. Load an object for Film and retry."

#: appTools/ToolFilm.py:167
msgid "No FlatCAM object selected. Load an object for Box and retry."
msgstr "No FlatCAM object selected. Load an object for Box and retry."

#: appTools/ToolFilm.py:171
msgid "No FlatCAM object selected."
msgstr "No FlatCAM object selected."

#: appTools/ToolFilm.py:182
msgid "Generating Film ..."
msgstr "Generating Film ..."

#: appTools/ToolFilm.py:231 appTools/ToolFilm.py:236
msgid "Export positive film"
msgstr "Export positive film"

#: appTools/ToolFilm.py:270
msgid ""
"No Excellon object selected. Load an object for punching reference and retry."
msgstr ""
"No Excellon object selected. Load an object for punching reference and retry."

#: appTools/ToolFilm.py:294
msgid ""
" Could not generate punched hole film because the punch hole sizeis bigger "
"than some of the apertures in the Gerber object."
msgstr ""
" Could not generate punched hole film because the punch hole sizeis bigger "
"than some of the apertures in the Gerber object."

#: appTools/ToolFilm.py:306
msgid ""
"Could not generate punched hole film because the punch hole sizeis bigger "
"than some of the apertures in the Gerber object."
msgstr ""
"Could not generate punched hole film because the punch hole sizeis bigger "
"than some of the apertures in the Gerber object."

#: appTools/ToolFilm.py:324
msgid ""
"Could not generate punched hole film because the newly created object "
"geometry is the same as the one in the source object geometry..."
msgstr ""
"Could not generate punched hole film because the newly created object "
"geometry is the same as the one in the source object geometry..."

#: appTools/ToolFilm.py:379 appTools/ToolFilm.py:384
msgid "Export negative film"
msgstr "Export negative film"

#: appTools/ToolFilm.py:444 appTools/ToolFilm.py:698
#: appTools/ToolPanelize.py:210
msgid "No object Box. Using instead"
msgstr "No object Box. Using instead"

#: appTools/ToolFilm.py:635 appTools/ToolFilm.py:879
msgid "Film file exported to"
msgstr "Film file exported to"

#: appTools/ToolFilm.py:905
msgid "Film PCB"
msgstr "Film PCB"

#: appTools/ToolFilm.py:937
msgid ""
"Specify the type of object for which to create the film.\n"
"The object can be of type: Gerber or Geometry.\n"
"The selection here decide the type of objects that will be\n"
"in the Film Object combobox."
msgstr ""
"Specify the type of object for which to create the film.\n"
"The object can be of type: Gerber or Geometry.\n"
"The selection here decide the type of objects that will be\n"
"in the Film Object combobox."

#: appTools/ToolFilm.py:960
msgid ""
"Specify the type of object to be used as an container for\n"
"film creation. It can be: Gerber or Geometry type.The selection here decide "
"the type of objects that will be\n"
"in the Box Object combobox."
msgstr ""
"Specify the type of object to be used as an container for\n"
"film creation. It can be: Gerber or Geometry type.The selection here decide "
"the type of objects that will be\n"
"in the Box Object combobox."

#: appTools/ToolFilm.py:1127
msgid "Film Parameters"
msgstr "Film Parameters"

#: appTools/ToolFilm.py:1186
msgid "Punch drill holes"
msgstr "Punch drill holes"

#: appTools/ToolFilm.py:1187
msgid ""
"When checked the generated film will have holes in pads when\n"
"the generated film is positive. This is done to help drilling,\n"
"when done manually."
msgstr ""
"When checked the generated film will have holes in pads when\n"
"the generated film is positive. This is done to help drilling,\n"
"when done manually."

#: appTools/ToolFilm.py:1205
msgid "Source"
msgstr "Source"

#: appTools/ToolFilm.py:1207
msgid ""
"The punch hole source can be:\n"
"- Excellon -> an Excellon holes center will serve as reference.\n"
"- Pad Center -> will try to use the pads center as reference."
msgstr ""
"The punch hole source can be:\n"
"- Excellon -> an Excellon holes center will serve as reference.\n"
"- Pad Center -> will try to use the pads center as reference."

#: appTools/ToolFilm.py:1212
msgid "Pad center"
msgstr "Pad center"

#: appTools/ToolFilm.py:1217
msgid "Excellon Obj"
msgstr "Excellon Obj"

#: appTools/ToolFilm.py:1219
msgid ""
"Remove the geometry of Excellon from the Film to create the holes in pads."
msgstr ""
"Remove the geometry of Excellon from the Film to create the holes in pads."

#: appTools/ToolFilm.py:1233
msgid "Punch Size"
msgstr "Punch Size"

#: appTools/ToolFilm.py:1234
msgid "The value here will control how big is the punch hole in the pads."
msgstr "The value here will control how big is the punch hole in the pads."

#: appTools/ToolFilm.py:1368
msgid "Save Film"
msgstr "Save Film"

#: appTools/ToolFilm.py:1371
msgid ""
"Create a Film for the selected object, within\n"
"the specified box. Does not create a new \n"
" FlatCAM object, but directly save it in the\n"
"selected format."
msgstr ""
"Create a Film for the selected object, within\n"
"the specified box. Does not create a new \n"
" FlatCAM object, but directly save it in the\n"
"selected format."

#: appTools/ToolFilm.py:1453
msgid ""
"Using the Pad center does not work on Geometry objects. Only a Gerber object "
"has pads."
msgstr ""
"Using the Pad center does not work on Geometry objects. Only a Gerber object "
"has pads."

#: appTools/ToolImage.py:65
msgid "Image Tool"
msgstr "Image Tool"

#: appTools/ToolImage.py:94 appTools/ToolImage.py:97
msgid "Import IMAGE"
msgstr "Import IMAGE"

#: appTools/ToolImage.py:141 app_Main.py:10056 app_Main.py:10106
msgid ""
"Not supported type is picked as parameter. Only Geometry and Gerber are "
"supported"
msgstr ""
"Not supported type is picked as parameter. Only Geometry and Gerber are "
"supported"

#: appTools/ToolImage.py:149 appTools/ToolPcbWizard.py:336
msgid "Importing"
msgstr "Importing"

#: appTools/ToolImage.py:161 appTools/ToolPDF.py:155 app_Main.py:10070
#: app_Main.py:10125 app_Main.py:10203 app_Main.py:10266 app_Main.py:10332
#: app_Main.py:10397 app_Main.py:10454
msgid "Opened"
msgstr "Opened"

#: appTools/ToolImage.py:166
msgid "Image as Object"
msgstr "Image as Object"

#: appTools/ToolImage.py:197
msgid ""
"Specify the type of object to create from the image.\n"
"It can be of type: Gerber or Geometry."
msgstr ""
"Specify the type of object to create from the image.\n"
"It can be of type: Gerber or Geometry."

#: appTools/ToolImage.py:206
msgid "DPI value"
msgstr "DPI value"

#: appTools/ToolImage.py:207
msgid "Specify a DPI value for the image."
msgstr "Specify a DPI value for the image."

#: appTools/ToolImage.py:213
msgid "Level of detail"
msgstr "Level of detail"

#: appTools/ToolImage.py:222
msgid "Image type"
msgstr "Image type"

#: appTools/ToolImage.py:224
msgid ""
"Choose a method for the image interpretation.\n"
"B/W means a black & white image. Color means a colored image."
msgstr ""
"Choose a method for the image interpretation.\n"
"B/W means a black & white image. Color means a colored image."

#: appTools/ToolImage.py:233 appTools/ToolImage.py:248
#: appTools/ToolImage.py:261 appTools/ToolImage.py:274
msgid "Mask value"
msgstr "Mask value"

#: appTools/ToolImage.py:235
msgid ""
"Mask for monochrome image.\n"
"Takes values between [0 ... 255].\n"
"Decides the level of details to include\n"
"in the resulting geometry.\n"
"0 means no detail and 255 means everything \n"
"(which is totally black)."
msgstr ""
"Mask for monochrome image.\n"
"Takes values between [0 ... 255].\n"
"Decides the level of details to include\n"
"in the resulting geometry.\n"
"0 means no detail and 255 means everything \n"
"(which is totally black)."

#: appTools/ToolImage.py:250
msgid ""
"Mask for RED color.\n"
"Takes values between [0 ... 255].\n"
"Decides the level of details to include\n"
"in the resulting geometry."
msgstr ""
"Mask for RED color.\n"
"Takes values between [0 ... 255].\n"
"Decides the level of details to include\n"
"in the resulting geometry."

#: appTools/ToolImage.py:263
msgid ""
"Mask for GREEN color.\n"
"Takes values between [0 ... 255].\n"
"Decides the level of details to include\n"
"in the resulting geometry."
msgstr ""
"Mask for GREEN color.\n"
"Takes values between [0 ... 255].\n"
"Decides the level of details to include\n"
"in the resulting geometry."

#: appTools/ToolImage.py:276
msgid ""
"Mask for BLUE color.\n"
"Takes values between [0 ... 255].\n"
"Decides the level of details to include\n"
"in the resulting geometry."
msgstr ""
"Mask for BLUE color.\n"
"Takes values between [0 ... 255].\n"
"Decides the level of details to include\n"
"in the resulting geometry."

#: appTools/ToolImage.py:284
msgid "Import image"
msgstr "Import image"

#: appTools/ToolImage.py:286
msgid "Open a image of raster type and then import it in FlatCAM."
msgstr "Open a image of raster type and then import it in FlatCAM."

#: appTools/ToolInvertGerber.py:75
msgid "Invert Tool"
msgstr "Invert Tool"

#: appTools/ToolInvertGerber.py:266
msgid "Invert Gerber"
msgstr "Invert Gerber"

#: appTools/ToolInvertGerber.py:269
msgid ""
"Will invert the Gerber object: areas that have copper\n"
"will be empty of copper and previous empty area will be\n"
"filled with copper."
msgstr ""
"Will invert the Gerber object: areas that have copper\n"
"will be empty of copper and previous empty area will be\n"
"filled with copper."

#: appTools/ToolIsolation.py:788 appTools/ToolNCC.py:459
#: appTools/ToolPaint.py:384 appTools/ToolSolderPaste.py:122 app_Main.py:4611
msgid "New Tool"
msgstr "New Tool"

#: appTools/ToolIsolation.py:810 appTools/ToolNCC.py:481
#: appTools/ToolPaint.py:398 appTools/ToolSolderPaste.py:135 app_Main.py:4625
msgid "Adding Tool cancelled"
msgstr "Adding Tool cancelled"

#: appTools/ToolIsolation.py:931 appTools/ToolIsolation.py:1070
#: appTools/ToolNCC.py:868 appTools/ToolNCC.py:1012 appTools/ToolOptimal.py:179
msgid ""
"The Gerber object has one Polygon as geometry.\n"
"There are no distances between geometry elements to be found."
msgstr ""
"The Gerber object has one Polygon as geometry.\n"
"There are no distances between geometry elements to be found."

#: appTools/ToolIsolation.py:963 appTools/ToolIsolation.py:1028
#: appTools/ToolNCC.py:900 appTools/ToolNCC.py:969
#| msgid "NCC Tool. Checking tools for validity."
msgid "Checking tools for validity."
msgstr "Checking tools for validity."

#: appTools/ToolIsolation.py:980 appTools/ToolIsolation.py:1045
#: appTools/ToolNCC.py:917 appTools/ToolNCC.py:986
#| msgid "Working ..."
msgid "Checking ..."
msgstr "Checking ..."

#: appTools/ToolIsolation.py:1006 appTools/ToolIsolation.py:1604
#: appTools/ToolIsolation.py:1805 appTools/ToolIsolation.py:1992
#: appTools/ToolNCC.py:942 appTools/ToolNCC.py:1448 appTools/ToolPaint.py:1040
#: appTools/ToolPaint.py:1753
msgid "There are no tools selected in the Tool Table."
msgstr "There are no tools selected in the Tool Table."

#: appTools/ToolIsolation.py:1014
msgid ""
"Incomplete isolation. At least one tool could not do a complete isolation."
msgstr ""
"Incomplete isolation. At least one tool could not do a complete isolation."

#: appTools/ToolIsolation.py:1116 appTools/ToolNCC.py:1057
msgid "Optimal tool diameter found"
msgstr "Optimal tool diameter found"

#: appTools/ToolIsolation.py:1157 appTools/ToolIsolation.py:1244
#: appTools/ToolIsolation.py:1302 appTools/ToolIsolation.py:2729
#: appTools/ToolNCC.py:1103 appTools/ToolNCC.py:1191 appTools/ToolNCC.py:1253
#: appTools/ToolNCC.py:3869 appTools/ToolPaint.py:703 appTools/ToolPaint.py:791
#: appTools/ToolPaint.py:853 appTools/ToolPaint.py:2692
#: appTools/ToolSolderPaste.py:488
msgid "Cancelled. Tool already in Tool Table."
msgstr "Cancelled. Tool already in Tool Table."

#: appTools/ToolIsolation.py:1332 appTools/ToolNCC.py:1283
#: appTools/ToolPaint.py:882
msgid "Default tool added to Tool Table."
msgstr "Default tool added to Tool Table."

#: appTools/ToolIsolation.py:1358 appTools/ToolNCC.py:1309
#: appTools/ToolPaint.py:907
msgid "Tool from Tool Table was edited."
msgstr "Tool from Tool Table was edited."

#: appTools/ToolIsolation.py:1371 appTools/ToolNCC.py:1322
#: appTools/ToolPaint.py:920 appTools/ToolSolderPaste.py:548
msgid "Cancelled. New diameter value is already in the Tool Table."
msgstr "Cancelled. New diameter value is already in the Tool Table."

#: appTools/ToolIsolation.py:1422 appTools/ToolNCC.py:1373
#: appTools/ToolPaint.py:970
msgid "Delete failed. Select a tool to delete."
msgstr "Delete failed. Select a tool to delete."

#: appTools/ToolIsolation.py:1428 appTools/ToolNCC.py:1379
#: appTools/ToolPaint.py:976
msgid "Tool(s) deleted from Tool Table."
msgstr "Tool(s) deleted from Tool Table."

#: appTools/ToolIsolation.py:1479
msgid "Isolating ..."
msgstr "Isolating ..."

#: appTools/ToolIsolation.py:1499
msgid "Following geometry was generated"
msgstr "Following geometry was generated"

#: appTools/ToolIsolation.py:1514
msgid "Failed to create Follow Geometry with tool diameter"
msgstr "Failed to create Follow Geometry with tool diameter"

#: appTools/ToolIsolation.py:1517
msgid "Follow Geometry was created with tool diameter"
msgstr "Follow Geometry was created with tool diameter"

#: appTools/ToolIsolation.py:1558
msgid "Click on a polygon to isolate it."
msgstr "Click on a polygon to isolate it."

#: appTools/ToolIsolation.py:1686 appTools/ToolIsolation.py:1709
#: appTools/ToolIsolation.py:1865 appTools/ToolIsolation.py:2061
msgid "Subtracting Geo"
msgstr "Subtracting Geo"

#: appTools/ToolIsolation.py:1690 appTools/ToolIsolation.py:1869
#: appTools/ToolIsolation.py:2065
msgid "Intersecting Geo"
msgstr "Intersecting Geo"

#: appTools/ToolIsolation.py:1741 appTools/ToolIsolation.py:1938
#: appTools/ToolIsolation.py:2130
msgid "Empty Geometry in"
msgstr "Empty Geometry in"

#: appTools/ToolIsolation.py:1947
msgid ""
"Partial failure. The geometry was processed with all tools.\n"
"But there are still not-isolated geometry elements. Try to include a tool "
"with smaller diameter."
msgstr ""
"Partial failure. The geometry was processed with all tools.\n"
"But there are still not-isolated geometry elements. Try to include a tool "
"with smaller diameter."

#: appTools/ToolIsolation.py:1950
msgid ""
"The following are coordinates for the copper features that could not be "
"isolated:"
msgstr ""
"The following are coordinates for the copper features that could not be "
"isolated:"

#: appTools/ToolIsolation.py:2294 appTools/ToolIsolation.py:2407
#: appTools/ToolPaint.py:1135
msgid "Added polygon"
msgstr "Added polygon"

#: appTools/ToolIsolation.py:2295 appTools/ToolIsolation.py:2409
msgid "Click to add next polygon or right click to start isolation."
msgstr "Click to add next polygon or right click to start isolation."

#: appTools/ToolIsolation.py:2307 appTools/ToolPaint.py:1149
msgid "Removed polygon"
msgstr "Removed polygon"

#: appTools/ToolIsolation.py:2308
msgid "Click to add/remove next polygon or right click to start isolation."
msgstr "Click to add/remove next polygon or right click to start isolation."

#: appTools/ToolIsolation.py:2313 appTools/ToolPaint.py:1155
msgid "No polygon detected under click position."
msgstr "No polygon detected under click position."

#: appTools/ToolIsolation.py:2343 appTools/ToolPaint.py:1185
msgid "List of single polygons is empty. Aborting."
msgstr "List of single polygons is empty. Aborting."

#: appTools/ToolIsolation.py:2412
msgid "No polygon in selection."
msgstr "No polygon in selection."

#: appTools/ToolIsolation.py:2440
msgid "Click the end point of the paint area."
msgstr "Click the end point of the paint area."

#: appTools/ToolIsolation.py:2693 appTools/ToolNCC.py:3833
#: appTools/ToolPaint.py:2649 app_Main.py:5935 app_Main.py:5954
msgid "Tool from DB added in Tool Table."
msgstr "Tool from DB added in Tool Table."

#: appTools/ToolIsolation.py:2747 appTools/ToolNCC.py:3886
#: appTools/ToolPaint.py:2709
msgid "New tool added to Tool Table."
msgstr "New tool added to Tool Table."

#: appTools/ToolIsolation.py:3093
msgid "Gerber object for isolation routing."
msgstr "Gerber object for isolation routing."

#: appTools/ToolIsolation.py:3117 appTools/ToolNCC.py:3988
msgid ""
"Tools pool from which the algorithm\n"
"will pick the ones used for copper clearing."
msgstr ""
"Tools pool from which the algorithm\n"
"will pick the ones used for copper clearing."

#: appTools/ToolIsolation.py:3133
msgid ""
"This is the Tool Number.\n"
"Isolation routing will start with the tool with the biggest \n"
"diameter, continuing until there are no more tools.\n"
"Only tools that create Isolation geometry will still be present\n"
"in the resulting geometry. This is because with some tools\n"
"this function will not be able to create routing geometry."
msgstr ""
"This is the Tool Number.\n"
"Isolation routing will start with the tool with the biggest \n"
"diameter, continuing until there are no more tools.\n"
"Only tools that create Isolation geometry will still be present\n"
"in the resulting geometry. This is because with some tools\n"
"this function will not be able to create routing geometry."

#: appTools/ToolIsolation.py:3141 appTools/ToolNCC.py:4012
msgid ""
"Tool Diameter. It's value (in current FlatCAM units)\n"
"is the cut width into the material."
msgstr ""
"Tool Diameter. It's value (in current FlatCAM units)\n"
"is the cut width into the material."

#: appTools/ToolIsolation.py:3145 appTools/ToolNCC.py:4016
msgid ""
"The Tool Type (TT) can be:\n"
"- Circular with 1 ... 4 teeth -> it is informative only. Being circular,\n"
"the cut width in material is exactly the tool diameter.\n"
"- Ball -> informative only and make reference to the Ball type endmill.\n"
"- V-Shape -> it will disable Z-Cut parameter in the resulting geometry UI "
"form\n"
"and enable two additional UI form fields in the resulting geometry: V-Tip "
"Dia and\n"
"V-Tip Angle. Adjusting those two values will adjust the Z-Cut parameter "
"such\n"
"as the cut width into material will be equal with the value in the Tool "
"Diameter\n"
"column of this table.\n"
"Choosing the 'V-Shape' Tool Type automatically will select the Operation "
"Type\n"
"in the resulting geometry as Isolation."
msgstr ""
"The Tool Type (TT) can be:\n"
"- Circular with 1 ... 4 teeth -> it is informative only. Being circular,\n"
"the cut width in material is exactly the tool diameter.\n"
"- Ball -> informative only and make reference to the Ball type endmill.\n"
"- V-Shape -> it will disable Z-Cut parameter in the resulting geometry UI "
"form\n"
"and enable two additional UI form fields in the resulting geometry: V-Tip "
"Dia and\n"
"V-Tip Angle. Adjusting those two values will adjust the Z-Cut parameter "
"such\n"
"as the cut width into material will be equal with the value in the Tool "
"Diameter\n"
"column of this table.\n"
"Choosing the 'V-Shape' Tool Type automatically will select the Operation "
"Type\n"
"in the resulting geometry as Isolation."

#: appTools/ToolIsolation.py:3213 appTools/ToolNCC.py:4096
msgid "Optimal"
msgstr "Optimal"

#: appTools/ToolIsolation.py:3217 appTools/ToolNCC.py:4100
msgid ""
"Find a tool diameter that is guaranteed\n"
"to do a complete isolation."
msgstr ""
"Find a tool diameter that is guaranteed\n"
"to do a complete isolation."

#: appTools/ToolIsolation.py:3258 appTools/ToolNCC.py:4140
#: appTools/ToolPaint.py:2947 appTools/ToolSolderPaste.py:1212
msgid ""
"Delete a selection of tools in the Tool Table\n"
"by first selecting a row(s) in the Tool Table."
msgstr ""
"Delete a selection of tools in the Tool Table\n"
"by first selecting a row(s) in the Tool Table."

#: appTools/ToolIsolation.py:3446
msgid ""
"Specify the type of object to be excepted from isolation.\n"
"It can be of type: Gerber or Geometry.\n"
"What is selected here will dictate the kind\n"
"of objects that will populate the 'Object' combobox."
msgstr ""
"Specify the type of object to be excepted from isolation.\n"
"It can be of type: Gerber or Geometry.\n"
"What is selected here will dictate the kind\n"
"of objects that will populate the 'Object' combobox."

#: appTools/ToolIsolation.py:3456
msgid "Object whose area will be removed from isolation geometry."
msgstr "Object whose area will be removed from isolation geometry."

#: appTools/ToolIsolation.py:3492 appTools/ToolNCC.py:4427
msgid ""
"The type of FlatCAM object to be used as non copper clearing reference.\n"
"It can be Gerber, Excellon or Geometry."
msgstr ""
"The type of FlatCAM object to be used as non copper clearing reference.\n"
"It can be Gerber, Excellon or Geometry."

#: appTools/ToolIsolation.py:3558
msgid ""
"Create a Geometry object with toolpaths to cut \n"
"isolation outside, inside or on both sides of the\n"
"object. For a Gerber object outside means outside\n"
"of the Gerber feature and inside means inside of\n"
"the Gerber feature, if possible at all. This means\n"
"that only if the Gerber feature has openings inside, they\n"
"will be isolated. If what is wanted is to cut isolation\n"
"inside the actual Gerber feature, use a negative tool\n"
"diameter above."
msgstr ""
"Create a Geometry object with toolpaths to cut \n"
"isolation outside, inside or on both sides of the\n"
"object. For a Gerber object outside means outside\n"
"of the Gerber feature and inside means inside of\n"
"the Gerber feature, if possible at all. This means\n"
"that only if the Gerber feature has openings inside, they\n"
"will be isolated. If what is wanted is to cut isolation\n"
"inside the actual Gerber feature, use a negative tool\n"
"diameter above."

#: appTools/ToolMilling.py:1064
msgid "Generating drills milling geometry..."
msgstr "Generating drills milling geometry..."

#: appTools/ToolMilling.py:1169
msgid "Generating slot milling geometry..."
msgstr "Generating slot milling geometry..."

#: appTools/ToolMilling.py:1584
msgid "Milling Holes Tool"
msgstr "Milling Holes Tool"

#: appTools/ToolMilling.py:2166
msgid "Preprocessor E"
msgstr "Preprocessor E"

#: appTools/ToolMilling.py:2178
msgid "Preprocessor G"
msgstr "Preprocessor G"

#: appTools/ToolMilling.py:2180
msgid ""
"The preprocessor JSON file that dictates\n"
"Gcode output for Geometry (Milling) Objects."
msgstr ""
"The preprocessor JSON file that dictates\n"
"Gcode output for Geometry (Milling) Objects."

#: appTools/ToolMove.py:102
msgid "MOVE: Click on the Start point ..."
msgstr "MOVE: Click on the Start point ..."

#: appTools/ToolMove.py:113
msgid "Cancelled. No object(s) to move."
msgstr "Cancelled. No object(s) to move."

#: appTools/ToolMove.py:140
msgid "MOVE: Click on the Destination point ..."
msgstr "MOVE: Click on the Destination point ..."

#: appTools/ToolMove.py:163
msgid "Moving ..."
msgstr "Moving ..."

#: appTools/ToolMove.py:166
msgid "No object(s) selected."
msgstr "No object(s) selected."

#: appTools/ToolMove.py:221
msgid "Error when mouse left click."
msgstr "Error when mouse left click."

#: appTools/ToolNCC.py:954
msgid ""
"Incomplete isolation. None of the selected tools could do a complete "
"isolation."
msgstr ""
"Incomplete isolation. None of the selected tools could do a complete "
"isolation."

#: appTools/ToolNCC.py:957
msgid "At least one of the selected tools can do a complete isolation."
msgstr "At least one of the selected tools can do a complete isolation."

#: appTools/ToolNCC.py:1827 appTools/ToolNCC.py:2805
msgid "NCC Tool. Preparing non-copper polygons."
msgstr "NCC Tool. Preparing non-copper polygons."

#: appTools/ToolNCC.py:1887 appTools/ToolNCC.py:2933
msgid "NCC Tool. Calculate 'empty' area."
msgstr "NCC Tool. Calculate 'empty' area."

#: appTools/ToolNCC.py:1898 appTools/ToolNCC.py:1927 appTools/ToolNCC.py:2033
#: appTools/ToolNCC.py:2046 appTools/ToolNCC.py:2948 appTools/ToolNCC.py:3053
#: appTools/ToolNCC.py:3068 appTools/ToolNCC.py:3335 appTools/ToolNCC.py:3436
#: appTools/ToolNCC.py:3451
msgid "Buffering finished"
msgstr "Buffering finished"

#: appTools/ToolNCC.py:1902 appTools/ToolNCC.py:1931 appTools/ToolNCC.py:2037
#: appTools/ToolNCC.py:2049 appTools/ToolNCC.py:2956 appTools/ToolNCC.py:3075
#: appTools/ToolNCC.py:3342 appTools/ToolNCC.py:3458
msgid "Could not get the extent of the area to be non copper cleared."
msgstr "Could not get the extent of the area to be non copper cleared."

#: appTools/ToolNCC.py:1910 appTools/ToolNCC.py:2060 appTools/ToolNCC.py:3086
msgid "NCC Tool. Finished calculation of 'empty' area."
msgstr "NCC Tool. Finished calculation of 'empty' area."

#: appTools/ToolNCC.py:1963 appTools/ToolNCC.py:2983 appTools/ToolNCC.py:3060
#: appTools/ToolNCC.py:3362 appTools/ToolNCC.py:3443
msgid ""
"Isolation geometry is broken. Margin is less than isolation tool diameter."
msgstr ""
"Isolation geometry is broken. Margin is less than isolation tool diameter."

#: appTools/ToolNCC.py:2053 appTools/ToolNCC.py:3079 appTools/ToolNCC.py:3461
msgid "The selected object is not suitable for copper clearing."
msgstr "The selected object is not suitable for copper clearing."

#: appTools/ToolNCC.py:2103
msgid "Clearing the polygon with the method: lines."
msgstr "Clearing the polygon with the method: lines."

#: appTools/ToolNCC.py:2113
msgid "Failed. Clearing the polygon with the method: seed."
msgstr "Failed. Clearing the polygon with the method: seed."

#: appTools/ToolNCC.py:2122
msgid "Failed. Clearing the polygon with the method: standard."
msgstr "Failed. Clearing the polygon with the method: standard."

#: appTools/ToolNCC.py:2138
msgid "Polygon could not be cleared. Location:"
msgstr "Polygon could not be cleared. Location:"

#: appTools/ToolNCC.py:2170 appTools/ToolNCC.py:2172 appTools/ToolNCC.py:2754
#: appTools/ToolNCC.py:2756
msgid "Non-Copper clearing ..."
msgstr "Non-Copper clearing ..."

#: appTools/ToolNCC.py:2191
msgid ""
"There is no copper clearing tool in the selection and at least one is needed."
msgstr ""
"There is no copper clearing tool in the selection and at least one is needed."

#: appTools/ToolNCC.py:2206 appTools/ToolNCC.py:2901
msgid ""
"NCC Tool. Finished non-copper polygons. Normal copper clearing task started."
msgstr ""
"NCC Tool. Finished non-copper polygons. Normal copper clearing task started."

#: appTools/ToolNCC.py:2234 appTools/ToolNCC.py:2464
msgid "NCC Tool failed creating bounding box."
msgstr "NCC Tool failed creating bounding box."

#: appTools/ToolNCC.py:2254 appTools/ToolNCC.py:2507 appTools/ToolNCC.py:3100
#: appTools/ToolNCC.py:3486
msgid "NCC Tool clearing with tool diameter"
msgstr "NCC Tool clearing with tool diameter"

#: appTools/ToolNCC.py:2254 appTools/ToolNCC.py:2507 appTools/ToolNCC.py:3100
#: appTools/ToolNCC.py:3486
msgid "started."
msgstr "started."

#: appTools/ToolNCC.py:2382
msgid "Could not use the tool for copper clear."
msgstr "Could not use the tool for copper clear."

#: appTools/ToolNCC.py:2404 appTools/ToolNCC.py:3261
msgid ""
"There is no NCC Geometry in the file.\n"
"Usually it means that the tool diameter is too big for the painted "
"geometry.\n"
"Change the painting parameters and try again."
msgstr ""
"There is no NCC Geometry in the file.\n"
"Usually it means that the tool diameter is too big for the painted "
"geometry.\n"
"Change the painting parameters and try again."

#: appTools/ToolNCC.py:2414 appTools/ToolNCC.py:3270
msgid "NCC Tool clear all done."
msgstr "NCC Tool clear all done."

#: appTools/ToolNCC.py:2417 appTools/ToolNCC.py:3273
msgid "NCC Tool clear all done but the copper features isolation is broken for"
msgstr ""
"NCC Tool clear all done but the copper features isolation is broken for"

#: appTools/ToolNCC.py:2419 appTools/ToolNCC.py:2669 appTools/ToolNCC.py:3275
#: appTools/ToolNCC.py:3658
msgid "tools"
msgstr "tools"

#: appTools/ToolNCC.py:2446
msgid "NCC Tool. Rest machining copper clearing task started."
msgstr "NCC Tool. Rest machining copper clearing task started."

#: appTools/ToolNCC.py:2665 appTools/ToolNCC.py:3654
msgid "NCC Tool Rest Machining clear all done."
msgstr "NCC Tool Rest Machining clear all done."

#: appTools/ToolNCC.py:2668 appTools/ToolNCC.py:3657
msgid ""
"NCC Tool Rest Machining clear all done but the copper features isolation is "
"broken for"
msgstr ""
"NCC Tool Rest Machining clear all done but the copper features isolation is "
"broken for"

#: appTools/ToolNCC.py:2766
msgid "NCC Tool started. Reading parameters."
msgstr "NCC Tool started. Reading parameters."

#: appTools/ToolNCC.py:3760
msgid ""
"Try to use the Buffering Type = Full in Preferences -> Gerber General. "
"Reload the Gerber file after this change."
msgstr ""
"Try to use the Buffering Type = Full in Preferences -> Gerber General. "
"Reload the Gerber file after this change."

#: appTools/ToolNCC.py:3923
msgid "Non-Copper Clearing"
msgstr "Non-Copper Clearing"

#: appTools/ToolNCC.py:3952 appTools/ToolPaint.py:2783
msgid "Obj Type"
msgstr "Obj Type"

#: appTools/ToolNCC.py:3954
msgid ""
"Specify the type of object to be cleared of excess copper.\n"
"It can be of type: Gerber or Geometry.\n"
"What is selected here will dictate the kind\n"
"of objects that will populate the 'Object' combobox."
msgstr ""
"Specify the type of object to be cleared of excess copper.\n"
"It can be of type: Gerber or Geometry.\n"
"What is selected here will dictate the kind\n"
"of objects that will populate the 'Object' combobox."

#: appTools/ToolNCC.py:3976
msgid "Object to be cleared of excess copper."
msgstr "Object to be cleared of excess copper."

#: appTools/ToolNCC.py:4004
msgid ""
"This is the Tool Number.\n"
"Non copper clearing will start with the tool with the biggest \n"
"diameter, continuing until there are no more tools.\n"
"Only tools that create NCC clearing geometry will still be present\n"
"in the resulting geometry. This is because with some tools\n"
"this function will not be able to create painting geometry."
msgstr ""
"This is the Tool Number.\n"
"Non copper clearing will start with the tool with the biggest \n"
"diameter, continuing until there are no more tools.\n"
"Only tools that create NCC clearing geometry will still be present\n"
"in the resulting geometry. This is because with some tools\n"
"this function will not be able to create painting geometry."

#: appTools/ToolOptimal.py:142
msgid "Only Gerber objects can be evaluated."
msgstr "Only Gerber objects can be evaluated."

#: appTools/ToolOptimal.py:148
msgid ""
"Optimal Tool. Started to search for the minimum distance between copper "
"features."
msgstr ""
"Optimal Tool. Started to search for the minimum distance between copper "
"features."

#: appTools/ToolOptimal.py:158
msgid "Optimal Tool. Parsing geometry for aperture"
msgstr "Optimal Tool. Parsing geometry for aperture"

#: appTools/ToolOptimal.py:169
msgid "Optimal Tool. Creating a buffer for the object geometry."
msgstr "Optimal Tool. Creating a buffer for the object geometry."

#: appTools/ToolOptimal.py:184
msgid ""
"Optimal Tool. Finding the distances between each two elements. Iterations"
msgstr ""
"Optimal Tool. Finding the distances between each two elements. Iterations"

#: appTools/ToolOptimal.py:218
msgid "Optimal Tool. Finding the minimum distance."
msgstr "Optimal Tool. Finding the minimum distance."

#: appTools/ToolOptimal.py:234
msgid "Optimal Tool. Finished successfully."
msgstr "Optimal Tool. Finished successfully."

#: appTools/ToolOptimal.py:435
msgid "Number of decimals kept for found distances."
msgstr "Number of decimals kept for found distances."

#: appTools/ToolOptimal.py:443
msgid "Minimum distance"
msgstr "Minimum distance"

#: appTools/ToolOptimal.py:444
msgid "Display minimum distance between copper features."
msgstr "Display minimum distance between copper features."

#: appTools/ToolOptimal.py:448
msgid "Determined"
msgstr "Determined"

#: appTools/ToolOptimal.py:462
msgid "Occurring"
msgstr "Occurring"

#: appTools/ToolOptimal.py:463
msgid "How many times this minimum is found."
msgstr "How many times this minimum is found."

#: appTools/ToolOptimal.py:469
msgid "Minimum points coordinates"
msgstr "Minimum points coordinates"

#: appTools/ToolOptimal.py:470 appTools/ToolOptimal.py:476
msgid "Coordinates for points where minimum distance was found."
msgstr "Coordinates for points where minimum distance was found."

#: appTools/ToolOptimal.py:489 appTools/ToolOptimal.py:565
msgid "Jump to selected position"
msgstr "Jump to selected position"

#: appTools/ToolOptimal.py:491 appTools/ToolOptimal.py:567
msgid ""
"Select a position in the Locations text box and then\n"
"click this button."
msgstr ""
"Select a position in the Locations text box and then\n"
"click this button."

#: appTools/ToolOptimal.py:499
msgid "Other distances"
msgstr "Other distances"

#: appTools/ToolOptimal.py:500
msgid ""
"Will display other distances in the Gerber file ordered from\n"
"the minimum to the maximum, not including the absolute minimum."
msgstr ""
"Will display other distances in the Gerber file ordered from\n"
"the minimum to the maximum, not including the absolute minimum."

#: appTools/ToolOptimal.py:505
msgid "Other distances points coordinates"
msgstr "Other distances points coordinates"

#: appTools/ToolOptimal.py:506 appTools/ToolOptimal.py:520
#: appTools/ToolOptimal.py:527 appTools/ToolOptimal.py:544
#: appTools/ToolOptimal.py:551
msgid ""
"Other distances and the coordinates for points\n"
"where the distance was found."
msgstr ""
"Other distances and the coordinates for points\n"
"where the distance was found."

#: appTools/ToolOptimal.py:519
msgid "Gerber distances"
msgstr "Gerber distances"

#: appTools/ToolOptimal.py:543
msgid "Points coordinates"
msgstr "Points coordinates"

#: appTools/ToolOptimal.py:575
msgid "Find Minimum"
msgstr "Find Minimum"

#: appTools/ToolOptimal.py:578
msgid ""
"Calculate the minimum distance between copper features,\n"
"this will allow the determination of the right tool to\n"
"use for isolation or copper clearing."
msgstr ""
"Calculate the minimum distance between copper features,\n"
"this will allow the determination of the right tool to\n"
"use for isolation or copper clearing."

#: appTools/ToolPDF.py:91 appTools/ToolPDF.py:95
msgid "Open PDF"
msgstr "Open PDF"

#: appTools/ToolPDF.py:98
msgid "Open PDF cancelled"
msgstr "Open PDF cancelled"

#: appTools/ToolPDF.py:123
msgid "Parsing ..."
msgstr "Parsing ..."

#: appTools/ToolPDF.py:139 app_Main.py:10297
msgid "Failed to open"
msgstr "Failed to open"

#: appTools/ToolPDF.py:208 appTools/ToolPcbWizard.py:331 app_Main.py:10246
msgid "No geometry found in file"
msgstr "No geometry found in file"

#: appTools/ToolPDF.py:211 appTools/ToolPDF.py:284
#, python-format
msgid "Rendering PDF layer #%d ..."
msgstr "Rendering PDF layer #%d ..."

#: appTools/ToolPDF.py:215 appTools/ToolPDF.py:288
msgid "Open PDF file failed."
msgstr "Open PDF file failed."

#: appTools/ToolPDF.py:220 appTools/ToolPDF.py:293
msgid "Rendered"
msgstr "Rendered"

#: appTools/ToolPaint.py:1008
#, python-format
msgid "Could not retrieve object: %s"
msgstr "Could not retrieve object: %s"

#: appTools/ToolPaint.py:1018
msgid "Can't do Paint on MultiGeo geometries"
msgstr "Can't do Paint on MultiGeo geometries"

#: appTools/ToolPaint.py:1055
msgid "Click on a polygon to paint it."
msgstr "Click on a polygon to paint it."

#: appTools/ToolPaint.py:1071
msgid "Click the start point of the paint area."
msgstr "Click the start point of the paint area."

#: appTools/ToolPaint.py:1137
msgid "Click to add next polygon or right click to start painting."
msgstr "Click to add next polygon or right click to start painting."

#: appTools/ToolPaint.py:1150
msgid "Click to add/remove next polygon or right click to start painting."
msgstr "Click to add/remove next polygon or right click to start painting."

#: appTools/ToolPaint.py:1660
msgid "Painting polygon with method: lines."
msgstr "Painting polygon with method: lines."

#: appTools/ToolPaint.py:1672
msgid "Failed. Painting polygon with method: seed."
msgstr "Failed. Painting polygon with method: seed."

#: appTools/ToolPaint.py:1683
msgid "Failed. Painting polygon with method: standard."
msgstr "Failed. Painting polygon with method: standard."

#: appTools/ToolPaint.py:1773 appTools/ToolPaint.py:1960
msgid "Painting with tool diameter = "
msgstr "Painting with tool diameter = "

#: appTools/ToolPaint.py:1776 appTools/ToolPaint.py:1963
msgid "started"
msgstr "started"

#: appTools/ToolPaint.py:1802 appTools/ToolPaint.py:1950
msgid "Margin parameter too big. Tool is not used"
msgstr "Margin parameter too big. Tool is not used"

#: appTools/ToolPaint.py:1917 appTools/ToolPaint.py:2142
msgid ""
"There is no Painting Geometry in the file.\n"
"Usually it means that the tool diameter is too big for the painted "
"geometry.\n"
"Change the painting parameters and try again."
msgstr ""
"There is no Painting Geometry in the file.\n"
"Usually it means that the tool diameter is too big for the painted "
"geometry.\n"
"Change the painting parameters and try again."

#: appTools/ToolPaint.py:2185
msgid "Paint failed."
msgstr "Paint failed."

#: appTools/ToolPaint.py:2191
msgid "Paint Done."
msgstr "Paint Done."

#: appTools/ToolPaint.py:2196
msgid "Painting ..."
msgstr "Painting ..."

#: appTools/ToolPaint.py:2230 appTools/ToolPaint.py:2235
#: appTools/ToolPaint.py:2243 appTools/ToolPaint.py:2332
#: appTools/ToolPaint.py:2335 appTools/ToolPaint.py:2343
#: appTools/ToolPaint.py:2413 appTools/ToolPaint.py:2418
#: appTools/ToolPaint.py:2424
msgid "Paint Tool."
msgstr "Paint Tool."

#: appTools/ToolPaint.py:2231 appTools/ToolPaint.py:2235
#: appTools/ToolPaint.py:2243
msgid "Normal painting polygon task started."
msgstr "Normal painting polygon task started."

#: appTools/ToolPaint.py:2232 appTools/ToolPaint.py:2332
#: appTools/ToolPaint.py:2415
msgid "Buffering geometry..."
msgstr "Buffering geometry..."

#: appTools/ToolPaint.py:2257 appTools/ToolPaint.py:2350
#: appTools/ToolPaint.py:2432
msgid "No polygon found."
msgstr "No polygon found."

#: appTools/ToolPaint.py:2332 appTools/ToolPaint.py:2335
#: appTools/ToolPaint.py:2343
msgid "Paint all polygons task started."
msgstr "Paint all polygons task started."

#: appTools/ToolPaint.py:2414 appTools/ToolPaint.py:2418
#: appTools/ToolPaint.py:2424
msgid "Painting area task started."
msgstr "Painting area task started."

#: appTools/ToolPaint.py:2785
msgid ""
"Specify the type of object to be painted.\n"
"It can be of type: Gerber or Geometry.\n"
"What is selected here will dictate the kind\n"
"of objects that will populate the 'Object' combobox."
msgstr ""
"Specify the type of object to be painted.\n"
"It can be of type: Gerber or Geometry.\n"
"What is selected here will dictate the kind\n"
"of objects that will populate the 'Object' combobox."

#: appTools/ToolPaint.py:2807
msgid "Object to be painted."
msgstr "Object to be painted."

#: appTools/ToolPaint.py:2820
msgid ""
"Tools pool from which the algorithm\n"
"will pick the ones used for painting."
msgstr ""
"Tools pool from which the algorithm\n"
"will pick the ones used for painting."

#: appTools/ToolPaint.py:2837
msgid ""
"This is the Tool Number.\n"
"Painting will start with the tool with the biggest diameter,\n"
"continuing until there are no more tools.\n"
"Only tools that create painting geometry will still be present\n"
"in the resulting geometry. This is because with some tools\n"
"this function will not be able to create painting geometry."
msgstr ""
"This is the Tool Number.\n"
"Painting will start with the tool with the biggest diameter,\n"
"continuing until there are no more tools.\n"
"Only tools that create painting geometry will still be present\n"
"in the resulting geometry. This is because with some tools\n"
"this function will not be able to create painting geometry."

#: appTools/ToolPaint.py:2849
msgid ""
"The Tool Type (TT) can be:\n"
"- Circular -> it is informative only. Being circular,\n"
"the cut width in material is exactly the tool diameter.\n"
"- Ball -> informative only and make reference to the Ball type endmill.\n"
"- V-Shape -> it will disable Z-Cut parameter in the resulting geometry UI "
"form\n"
"and enable two additional UI form fields in the resulting geometry: V-Tip "
"Dia and\n"
"V-Tip Angle. Adjusting those two values will adjust the Z-Cut parameter "
"such\n"
"as the cut width into material will be equal with the value in the Tool "
"Diameter\n"
"column of this table.\n"
"Choosing the 'V-Shape' Tool Type automatically will select the Operation "
"Type\n"
"in the resulting geometry as Isolation."
msgstr ""
"The Tool Type (TT) can be:\n"
"- Circular -> it is informative only. Being circular,\n"
"the cut width in material is exactly the tool diameter.\n"
"- Ball -> informative only and make reference to the Ball type endmill.\n"
"- V-Shape -> it will disable Z-Cut parameter in the resulting geometry UI "
"form\n"
"and enable two additional UI form fields in the resulting geometry: V-Tip "
"Dia and\n"
"V-Tip Angle. Adjusting those two values will adjust the Z-Cut parameter "
"such\n"
"as the cut width into material will be equal with the value in the Tool "
"Diameter\n"
"column of this table.\n"
"Choosing the 'V-Shape' Tool Type automatically will select the Operation "
"Type\n"
"in the resulting geometry as Isolation."

#: appTools/ToolPaint.py:3128
msgid ""
"The type of FlatCAM object to be used as paint reference.\n"
"It can be Gerber, Excellon or Geometry."
msgstr ""
"The type of FlatCAM object to be used as paint reference.\n"
"It can be Gerber, Excellon or Geometry."

#: appTools/ToolPaint.py:3170
msgid "Create a Geometry Object which paints the polygons."
msgstr "Create a Geometry Object which paints the polygons."

#: appTools/ToolPanelize.py:90
msgid "Panel. Tool"
msgstr "Panel. Tool"

#: appTools/ToolPanelize.py:237
msgid "Columns or Rows are zero value. Change them to a positive integer."
msgstr "Columns or Rows are zero value. Change them to a positive integer."

#: appTools/ToolPanelize.py:276
msgid "Generating panel ... "
msgstr "Generating panel ... "

#: appTools/ToolPanelize.py:363 appTools/ToolPanelize.py:585
msgid "Generating panel ... Adding the source code."
msgstr "Generating panel ... Adding the source code."

#: appTools/ToolPanelize.py:551
msgid "Optimizing the overlapping paths."
msgstr "Optimizing the overlapping paths."

#: appTools/ToolPanelize.py:583
msgid "Optimization complete."
msgstr "Optimization complete."

#: appTools/ToolPanelize.py:597
msgid "Generating panel... Spawning copies"
msgstr "Generating panel... Spawning copies"

#: appTools/ToolPanelize.py:606
msgid "Panel done..."
msgstr "Panel done..."

#: appTools/ToolPanelize.py:609
#, python-brace-format
msgid ""
"{text} Too big for the constrain area. Final panel has {col} columns and "
"{row} rows"
msgstr ""
"{text} Too big for the constrain area. Final panel has {col} columns and "
"{row} rows"

#: appTools/ToolPanelize.py:618
msgid "Panel created successfully."
msgstr "Panel created successfully."

#: appTools/ToolPanelize.py:655
msgid ""
"Specify the type of object to be panelized\n"
"It can be of type: Gerber, Excellon or Geometry.\n"
"The selection here decide the type of objects that will be\n"
"in the Object combobox."
msgstr ""
"Specify the type of object to be panelized\n"
"It can be of type: Gerber, Excellon or Geometry.\n"
"The selection here decide the type of objects that will be\n"
"in the Object combobox."

#: appTools/ToolPanelize.py:688
msgid ""
"Object to be panelized. This means that it will\n"
"be duplicated in an array of rows and columns."
msgstr ""
"Object to be panelized. This means that it will\n"
"be duplicated in an array of rows and columns."

#: appTools/ToolPanelize.py:700
msgid "Penelization Reference"
msgstr "Penelization Reference"

#: appTools/ToolPanelize.py:702
msgid ""
"Choose the reference for panelization:\n"
"- Object = the bounding box of a different object\n"
"- Bounding Box = the bounding box of the object to be panelized\n"
"\n"
"The reference is useful when doing panelization for more than one\n"
"object. The spacings (really offsets) will be applied in reference\n"
"to this reference object therefore maintaining the panelized\n"
"objects in sync."
msgstr ""
"Choose the reference for panelization:\n"
"- Object = the bounding box of a different object\n"
"- Bounding Box = the bounding box of the object to be panelized\n"
"\n"
"The reference is useful when doing panelization for more than one\n"
"object. The spacings (really offsets) will be applied in reference\n"
"to this reference object therefore maintaining the panelized\n"
"objects in sync."

#: appTools/ToolPanelize.py:723
msgid "Box Type"
msgstr "Box Type"

#: appTools/ToolPanelize.py:725
msgid ""
"Specify the type of object to be used as an container for\n"
"panelization. It can be: Gerber or Geometry type.\n"
"The selection here decide the type of objects that will be\n"
"in the Box Object combobox."
msgstr ""
"Specify the type of object to be used as an container for\n"
"panelization. It can be: Gerber or Geometry type.\n"
"The selection here decide the type of objects that will be\n"
"in the Box Object combobox."

#: appTools/ToolPanelize.py:739
msgid ""
"The actual object that is used as container for the\n"
" selected object that is to be panelized."
msgstr ""
"The actual object that is used as container for the\n"
" selected object that is to be panelized."

#: appTools/ToolPanelize.py:749
msgid "Panel Data"
msgstr "Panel Data"

#: appTools/ToolPanelize.py:751
msgid ""
"This informations will shape the resulting panel.\n"
"The number of rows and columns will set how many\n"
"duplicates of the original geometry will be generated.\n"
"\n"
"The spacings will set the distance between any two\n"
"elements of the panel array."
msgstr ""
"This informations will shape the resulting panel.\n"
"The number of rows and columns will set how many\n"
"duplicates of the original geometry will be generated.\n"
"\n"
"The spacings will set the distance between any two\n"
"elements of the panel array."

#: appTools/ToolPanelize.py:814
msgid ""
"Choose the type of object for the panel object:\n"
"- Geometry\n"
"- Gerber"
msgstr ""
"Choose the type of object for the panel object:\n"
"- Geometry\n"
"- Gerber"

#: appTools/ToolPanelize.py:832
msgid "Constrain panel within"
msgstr "Constrain panel within"

#: appTools/ToolPanelize.py:873
msgid "Panelize Object"
msgstr "Panelize Object"

#: appTools/ToolPanelize.py:876 appTools/ToolRulesCheck.py:1612
msgid ""
"Panelize the specified object around the specified box.\n"
"In other words it creates multiple copies of the source object,\n"
"arranged in a 2D array of rows and columns."
msgstr ""
"Panelize the specified object around the specified box.\n"
"In other words it creates multiple copies of the source object,\n"
"arranged in a 2D array of rows and columns."

#: appTools/ToolPcbWizard.py:93
msgid "PCBWizard Tool"
msgstr "PCBWizard Tool"

#: appTools/ToolPcbWizard.py:179 appTools/ToolPcbWizard.py:183
msgid "Load PcbWizard Excellon file"
msgstr "Load PcbWizard Excellon file"

#: appTools/ToolPcbWizard.py:202 appTools/ToolPcbWizard.py:206
msgid "Load PcbWizard INF file"
msgstr "Load PcbWizard INF file"

#: appTools/ToolPcbWizard.py:254
msgid ""
"The INF file does not contain the tool table.\n"
"Try to open the Excellon file from File -> Open -> Excellon\n"
"and edit the drill diameters manually."
msgstr ""
"The INF file does not contain the tool table.\n"
"Try to open the Excellon file from File -> Open -> Excellon\n"
"and edit the drill diameters manually."

#: appTools/ToolPcbWizard.py:274
msgid "PcbWizard .INF file loaded."
msgstr "PcbWizard .INF file loaded."

#: appTools/ToolPcbWizard.py:278
msgid "Main PcbWizard Excellon file loaded."
msgstr "Main PcbWizard Excellon file loaded."

#: appTools/ToolPcbWizard.py:310 app_Main.py:10226
msgid "This is not Excellon file."
msgstr "This is not Excellon file."

#: appTools/ToolPcbWizard.py:313
msgid "Cannot parse file"
msgstr "Cannot parse file"

#: appTools/ToolPcbWizard.py:343
msgid "Import Excellon file failed."
msgstr "Import Excellon file failed."

#: appTools/ToolPcbWizard.py:350
msgid "Imported"
msgstr "Imported"

#: appTools/ToolPcbWizard.py:353
msgid "Excellon merging is in progress. Please wait..."
msgstr "Excellon merging is in progress. Please wait..."

#: appTools/ToolPcbWizard.py:355
msgid "The imported Excellon file is empty."
msgstr "The imported Excellon file is empty."

#: appTools/ToolPcbWizard.py:360
msgid "PcbWizard Import Tool"
msgstr "PcbWizard Import Tool"

#: appTools/ToolPcbWizard.py:379
msgid "Load files"
msgstr "Load files"

#: appTools/ToolPcbWizard.py:385
msgid "Excellon file"
msgstr "Excellon file"

#: appTools/ToolPcbWizard.py:387
msgid ""
"Load the Excellon file.\n"
"Usually it has a .DRL extension"
msgstr ""
"Load the Excellon file.\n"
"Usually it has a .DRL extension"

#: appTools/ToolPcbWizard.py:393
msgid "INF file"
msgstr "INF file"

#: appTools/ToolPcbWizard.py:395
msgid "Load the INF file."
msgstr "Load the INF file."

#: appTools/ToolPcbWizard.py:407
msgid "Tool Number"
msgstr "Tool Number"

#: appTools/ToolPcbWizard.py:409
msgid "Tool diameter in file units."
msgstr "Tool diameter in file units."

#: appTools/ToolPcbWizard.py:415
msgid "Excellon format"
msgstr "Excellon format"

#: appTools/ToolPcbWizard.py:423
msgid "Int. digits"
msgstr "Int. digits"

#: appTools/ToolPcbWizard.py:425
msgid "The number of digits for the integral part of the coordinates."
msgstr "The number of digits for the integral part of the coordinates."

#: appTools/ToolPcbWizard.py:432
msgid "Frac. digits"
msgstr "Frac. digits"

#: appTools/ToolPcbWizard.py:434
msgid "The number of digits for the fractional part of the coordinates."
msgstr "The number of digits for the fractional part of the coordinates."

#: appTools/ToolPcbWizard.py:441
msgid "No Suppression"
msgstr "No Suppression"

#: appTools/ToolPcbWizard.py:442
msgid "Zeros supp."
msgstr "Zeros supp."

#: appTools/ToolPcbWizard.py:444
msgid ""
"The type of zeros suppression used.\n"
"Can be of type:\n"
"- LZ = leading zeros are kept\n"
"- TZ = trailing zeros are kept\n"
"- No Suppression = no zero suppression"
msgstr ""
"The type of zeros suppression used.\n"
"Can be of type:\n"
"- LZ = leading zeros are kept\n"
"- TZ = trailing zeros are kept\n"
"- No Suppression = no zero suppression"

#: appTools/ToolPcbWizard.py:457
msgid ""
"The type of units that the coordinates and tool\n"
"diameters are using. Can be INCH or MM."
msgstr ""
"The type of units that the coordinates and tool\n"
"diameters are using. Can be INCH or MM."

#: appTools/ToolPcbWizard.py:464
msgid "Import Excellon"
msgstr "Import Excellon"

#: appTools/ToolPcbWizard.py:466
msgid ""
"Import in FlatCAM an Excellon file\n"
"that store it's information's in 2 files.\n"
"One usually has .DRL extension while\n"
"the other has .INF extension."
msgstr ""
"Import in FlatCAM an Excellon file\n"
"that store it's information's in 2 files.\n"
"One usually has .DRL extension while\n"
"the other has .INF extension."

#: appTools/ToolProperties.py:112 appTools/ToolTransform.py:142
#: app_Main.py:5107 app_Main.py:8511 app_Main.py:8613 app_Main.py:8655
#: app_Main.py:8697 app_Main.py:8739 app_Main.py:8780 app_Main.py:8825
#: app_Main.py:8870 app_Main.py:9333 app_Main.py:9337
msgid "No object selected."
msgstr "No object selected."

#: appTools/ToolProperties.py:127
msgid "Object Properties are displayed."
msgstr "Object Properties are displayed."

#: appTools/ToolProperties.py:132
msgid "Properties Tool"
msgstr "Properties Tool"

#: appTools/ToolProperties.py:149
msgid "TYPE"
msgstr "TYPE"

#: appTools/ToolProperties.py:150
msgid "NAME"
msgstr "NAME"

#: appTools/ToolProperties.py:180
msgid "Geo Type"
msgstr "Geo Type"

#: appTools/ToolProperties.py:183
msgid "Single-Geo"
msgstr "Single-Geo"

#: appTools/ToolProperties.py:184
msgid "Multi-Geo"
msgstr "Multi-Geo"

#: appTools/ToolProperties.py:338 appTools/ToolProperties.py:342
#: appTools/ToolProperties.py:344
msgid "Inch"
msgstr "Inch"

#: appTools/ToolProperties.py:338 appTools/ToolProperties.py:343
#: appTools/ToolProperties.py:345
msgid "Metric"
msgstr "Metric"

#: appTools/ToolPunchGerber.py:142
msgid "Punch Tool"
msgstr "Punch Tool"

#: appTools/ToolPunchGerber.py:509
msgid "The value of the fixed diameter is 0.0. Aborting."
msgstr "The value of the fixed diameter is 0.0. Aborting."

#: appTools/ToolPunchGerber.py:512
msgid ""
"Could not generate punched hole Gerber because the punch hole size is bigger "
"than some of the apertures in the Gerber object."
msgstr ""
"Could not generate punched hole Gerber because the punch hole size is bigger "
"than some of the apertures in the Gerber object."

#: appTools/ToolPunchGerber.py:585
msgid ""
"Could not generate punched hole Gerber because the newly created object "
"geometry is the same as the one in the source object geometry..."
msgstr ""
"Could not generate punched hole Gerber because the newly created object "
"geometry is the same as the one in the source object geometry..."

#: appTools/ToolPunchGerber.py:976 appTools/ToolPunchGerber.py:1291
msgid "Punch Gerber"
msgstr "Punch Gerber"

#: appTools/ToolPunchGerber.py:1011
msgid "Gerber into which to punch holes"
msgstr "Gerber into which to punch holes"

#: appTools/ToolPunchGerber.py:1040
msgid "ALL"
msgstr "ALL"

#: appTools/ToolPunchGerber.py:1145
msgid ""
"Remove the geometry of Excellon from the Gerber to create the holes in pads."
msgstr ""
"Remove the geometry of Excellon from the Gerber to create the holes in pads."

#: appTools/ToolPunchGerber.py:1294
msgid ""
"Create a Gerber object from the selected object, within\n"
"the specified box."
msgstr ""
"Create a Gerber object from the selected object, within\n"
"the specified box."

#: appTools/ToolQRCode.py:147 appTools/ToolQRCode.py:488
#: appTools/ToolQRCode.py:539
msgid "Cancelled. There is no QRCode Data in the text box."
msgstr "Cancelled. There is no QRCode Data in the text box."

#: appTools/ToolQRCode.py:206
msgid "Click on the Destination point ..."
msgstr "Click on the Destination point ..."

#: appTools/ToolQRCode.py:324
msgid "QRCode Tool done."
msgstr "QRCode Tool done."

#: appTools/ToolQRCode.py:668
msgid "Gerber Object to which the QRCode will be added."
msgstr "Gerber Object to which the QRCode will be added."

#: appTools/ToolQRCode.py:704
msgid "The parameters used to shape the QRCode."
msgstr "The parameters used to shape the QRCode."

#: appTools/ToolQRCode.py:804
msgid "Export QRCode"
msgstr "Export QRCode"

#: appTools/ToolQRCode.py:806
msgid ""
"Show a set of controls allowing to export the QRCode\n"
"to a SVG file or an PNG file."
msgstr ""
"Show a set of controls allowing to export the QRCode\n"
"to a SVG file or an PNG file."

#: appTools/ToolQRCode.py:845
msgid "Transparent back color"
msgstr "Transparent back color"

#: appTools/ToolQRCode.py:870
msgid "Export QRCode SVG"
msgstr "Export QRCode SVG"

#: appTools/ToolQRCode.py:872
msgid "Export a SVG file with the QRCode content."
msgstr "Export a SVG file with the QRCode content."

#: appTools/ToolQRCode.py:883
msgid "Export QRCode PNG"
msgstr "Export QRCode PNG"

#: appTools/ToolQRCode.py:885
msgid "Export a PNG image file with the QRCode content."
msgstr "Export a PNG image file with the QRCode content."

#: appTools/ToolQRCode.py:896
msgid "Insert QRCode"
msgstr "Insert QRCode"

#: appTools/ToolQRCode.py:899
msgid "Create the QRCode object."
msgstr "Create the QRCode object."

#: appTools/ToolRulesCheck.py:660 appTools/ToolRulesCheck.py:720
#: appTools/ToolRulesCheck.py:757 appTools/ToolRulesCheck.py:829
#: appTools/ToolRulesCheck.py:883 appTools/ToolRulesCheck.py:921
#: appTools/ToolRulesCheck.py:986
msgid "Value is not valid."
msgstr "Value is not valid."

#: appTools/ToolRulesCheck.py:674
msgid "TOP -> Copper to Copper clearance"
msgstr "TOP -> Copper to Copper clearance"

#: appTools/ToolRulesCheck.py:685
msgid "BOTTOM -> Copper to Copper clearance"
msgstr "BOTTOM -> Copper to Copper clearance"

#: appTools/ToolRulesCheck.py:690 appTools/ToolRulesCheck.py:784
#: appTools/ToolRulesCheck.py:948
msgid ""
"At least one Gerber object has to be selected for this rule but none is "
"selected."
msgstr ""
"At least one Gerber object has to be selected for this rule but none is "
"selected."

#: appTools/ToolRulesCheck.py:726
msgid ""
"One of the copper Gerber objects or the Outline Gerber object is not valid."
msgstr ""
"One of the copper Gerber objects or the Outline Gerber object is not valid."

#: appTools/ToolRulesCheck.py:739 appTools/ToolRulesCheck.py:903
msgid ""
"Outline Gerber object presence is mandatory for this rule but it is not "
"selected."
msgstr ""
"Outline Gerber object presence is mandatory for this rule but it is not "
"selected."

#: appTools/ToolRulesCheck.py:756 appTools/ToolRulesCheck.py:783
msgid "Silk to Silk clearance"
msgstr "Silk to Silk clearance"

#: appTools/ToolRulesCheck.py:769
msgid "TOP -> Silk to Silk clearance"
msgstr "TOP -> Silk to Silk clearance"

#: appTools/ToolRulesCheck.py:779
msgid "BOTTOM -> Silk to Silk clearance"
msgstr "BOTTOM -> Silk to Silk clearance"

#: appTools/ToolRulesCheck.py:835
msgid "One or more of the Gerber objects is not valid."
msgstr "One or more of the Gerber objects is not valid."

#: appTools/ToolRulesCheck.py:843
msgid "TOP -> Silk to Solder Mask Clearance"
msgstr "TOP -> Silk to Solder Mask Clearance"

#: appTools/ToolRulesCheck.py:849
msgid "BOTTOM -> Silk to Solder Mask Clearance"
msgstr "BOTTOM -> Silk to Solder Mask Clearance"

#: appTools/ToolRulesCheck.py:853
msgid ""
"Both Silk and Solder Mask Gerber objects has to be either both Top or both "
"Bottom."
msgstr ""
"Both Silk and Solder Mask Gerber objects has to be either both Top or both "
"Bottom."

#: appTools/ToolRulesCheck.py:889
msgid ""
"One of the Silk Gerber objects or the Outline Gerber object is not valid."
msgstr ""
"One of the Silk Gerber objects or the Outline Gerber object is not valid."

#: appTools/ToolRulesCheck.py:933
msgid "TOP -> Minimum Solder Mask Sliver"
msgstr "TOP -> Minimum Solder Mask Sliver"

#: appTools/ToolRulesCheck.py:943
msgid "BOTTOM -> Minimum Solder Mask Sliver"
msgstr "BOTTOM -> Minimum Solder Mask Sliver"

#: appTools/ToolRulesCheck.py:992
msgid "One of the Copper Gerber objects or the Excellon objects is not valid."
msgstr "One of the Copper Gerber objects or the Excellon objects is not valid."

#: appTools/ToolRulesCheck.py:1008
msgid ""
"Excellon object presence is mandatory for this rule but none is selected."
msgstr ""
"Excellon object presence is mandatory for this rule but none is selected."

#: appTools/ToolRulesCheck.py:1086 appTools/ToolRulesCheck.py:1099
#: appTools/ToolRulesCheck.py:1110 appTools/ToolRulesCheck.py:1123
msgid "STATUS"
msgstr "STATUS"

#: appTools/ToolRulesCheck.py:1089 appTools/ToolRulesCheck.py:1113
msgid "FAILED"
msgstr "FAILED"

#: appTools/ToolRulesCheck.py:1102 appTools/ToolRulesCheck.py:1126
msgid "PASSED"
msgstr "PASSED"

#: appTools/ToolRulesCheck.py:1103 appTools/ToolRulesCheck.py:1127
msgid "Violations: There are no violations for the current rule."
msgstr "Violations: There are no violations for the current rule."

#: appTools/ToolRulesCheck.py:1145
msgid "Check Rules"
msgstr "Check Rules"

#: appTools/ToolRulesCheck.py:1173
msgid "Gerber objects for which to check rules."
msgstr "Gerber objects for which to check rules."

#: appTools/ToolRulesCheck.py:1188
msgid "Top"
msgstr "Top"

#: appTools/ToolRulesCheck.py:1190
msgid "The Top Gerber Copper object for which rules are checked."
msgstr "The Top Gerber Copper object for which rules are checked."

#: appTools/ToolRulesCheck.py:1206
msgid "Bottom"
msgstr "Bottom"

#: appTools/ToolRulesCheck.py:1208
msgid "The Bottom Gerber Copper object for which rules are checked."
msgstr "The Bottom Gerber Copper object for which rules are checked."

#: appTools/ToolRulesCheck.py:1224
msgid "SM Top"
msgstr "SM Top"

#: appTools/ToolRulesCheck.py:1226
msgid "The Top Gerber Solder Mask object for which rules are checked."
msgstr "The Top Gerber Solder Mask object for which rules are checked."

#: appTools/ToolRulesCheck.py:1242
msgid "SM Bottom"
msgstr "SM Bottom"

#: appTools/ToolRulesCheck.py:1244
msgid "The Bottom Gerber Solder Mask object for which rules are checked."
msgstr "The Bottom Gerber Solder Mask object for which rules are checked."

#: appTools/ToolRulesCheck.py:1260
msgid "Silk Top"
msgstr "Silk Top"

#: appTools/ToolRulesCheck.py:1262
msgid "The Top Gerber Silkscreen object for which rules are checked."
msgstr "The Top Gerber Silkscreen object for which rules are checked."

#: appTools/ToolRulesCheck.py:1278
msgid "Silk Bottom"
msgstr "Silk Bottom"

#: appTools/ToolRulesCheck.py:1280
msgid "The Bottom Gerber Silkscreen object for which rules are checked."
msgstr "The Bottom Gerber Silkscreen object for which rules are checked."

#: appTools/ToolRulesCheck.py:1298
msgid "The Gerber Outline (Cutout) object for which rules are checked."
msgstr "The Gerber Outline (Cutout) object for which rules are checked."

#: appTools/ToolRulesCheck.py:1311
msgid "Excellon objects for which to check rules."
msgstr "Excellon objects for which to check rules."

#: appTools/ToolRulesCheck.py:1323
msgid "Excellon 1"
msgstr "Excellon 1"

#: appTools/ToolRulesCheck.py:1325
msgid ""
"Excellon object for which to check rules.\n"
"Holds the plated holes or a general Excellon file content."
msgstr ""
"Excellon object for which to check rules.\n"
"Holds the plated holes or a general Excellon file content."

#: appTools/ToolRulesCheck.py:1342
msgid "Excellon 2"
msgstr "Excellon 2"

#: appTools/ToolRulesCheck.py:1344
msgid ""
"Excellon object for which to check rules.\n"
"Holds the non-plated holes."
msgstr ""
"Excellon object for which to check rules.\n"
"Holds the non-plated holes."

#: appTools/ToolRulesCheck.py:1357
msgid "All Rules"
msgstr "All Rules"

#: appTools/ToolRulesCheck.py:1359
msgid "This check/uncheck all the rules below."
msgstr "This check/uncheck all the rules below."

#: appTools/ToolRulesCheck.py:1609
msgid "Run Rules Check"
msgstr "Run Rules Check"

#: appTools/ToolShell.py:59
msgid "Clear the text."
msgstr "Clear the text."

#: appTools/ToolShell.py:94 appTools/ToolShell.py:96
msgid "...processing..."
msgstr "...processing..."

#: appTools/ToolShell.py:296
msgid "FlatCAM Shell"
msgstr "FlatCAM Shell"

#: appTools/ToolSolderPaste.py:459
msgid "Please enter a tool diameter to add, in Float format."
msgstr "Please enter a tool diameter to add, in Float format."

#: appTools/ToolSolderPaste.py:493
msgid "New Nozzle tool added to Tool Table."
msgstr "New Nozzle tool added to Tool Table."

#: appTools/ToolSolderPaste.py:535
msgid "Nozzle tool from Tool Table was edited."
msgstr "Nozzle tool from Tool Table was edited."

#: appTools/ToolSolderPaste.py:593
msgid "Delete failed. Select a Nozzle tool to delete."
msgstr "Delete failed. Select a Nozzle tool to delete."

#: appTools/ToolSolderPaste.py:598
msgid "Nozzle tool(s) deleted from Tool Table."
msgstr "Nozzle tool(s) deleted from Tool Table."

#: appTools/ToolSolderPaste.py:652
msgid "No SolderPaste mask Gerber object loaded."
msgstr "No SolderPaste mask Gerber object loaded."

#: appTools/ToolSolderPaste.py:683
msgid "No Nozzle tools in the tool table."
msgstr "No Nozzle tools in the tool table."

#: appTools/ToolSolderPaste.py:809
msgid "Cancelled. Empty file, it has no geometry..."
msgstr "Cancelled. Empty file, it has no geometry..."

#: appTools/ToolSolderPaste.py:812
msgid "Solder Paste geometry generated successfully"
msgstr "Solder Paste geometry generated successfully"

#: appTools/ToolSolderPaste.py:819
msgid "Some or all pads have no solder due of inadequate nozzle diameters..."
msgstr "Some or all pads have no solder due of inadequate nozzle diameters..."

#: appTools/ToolSolderPaste.py:833
msgid "Generating Solder Paste dispensing geometry..."
msgstr "Generating Solder Paste dispensing geometry..."

#: appTools/ToolSolderPaste.py:852
msgid "There is no Geometry object available."
msgstr "There is no Geometry object available."

#: appTools/ToolSolderPaste.py:857
msgid "This Geometry can't be processed. NOT a solder_paste_tool geometry."
msgstr "This Geometry can't be processed. NOT a solder_paste_tool geometry."

#: appTools/ToolSolderPaste.py:893
msgid "An internal error has ocurred. See shell.\n"
msgstr "An internal error has ocurred. See shell.\n"

#: appTools/ToolSolderPaste.py:962
msgid "ToolSolderPaste CNCjob created"
msgstr "ToolSolderPaste CNCjob created"

#: appTools/ToolSolderPaste.py:981
msgid "SP GCode Editor"
msgstr "SP GCode Editor"

#: appTools/ToolSolderPaste.py:993 appTools/ToolSolderPaste.py:998
#: appTools/ToolSolderPaste.py:1047
msgid ""
"This CNCJob object can't be processed. NOT a solder_paste_tool CNCJob object."
msgstr ""
"This CNCJob object can't be processed. NOT a solder_paste_tool CNCJob object."

#: appTools/ToolSolderPaste.py:1022
msgid "No Gcode in the object"
msgstr "No Gcode in the object"

#: appTools/ToolSolderPaste.py:1057
msgid "Export GCode ..."
msgstr "Export GCode ..."

#: appTools/ToolSolderPaste.py:1105
msgid "Solder paste dispenser GCode file saved to"
msgstr "Solder paste dispenser GCode file saved to"

#: appTools/ToolSolderPaste.py:1115
msgid "Solder Paste Tool"
msgstr "Solder Paste Tool"

#: appTools/ToolSolderPaste.py:1145
msgid "Gerber Solderpaste object."
msgstr "Gerber Solderpaste object."

#: appTools/ToolSolderPaste.py:1158
msgid ""
"Tools pool from which the algorithm\n"
"will pick the ones used for dispensing solder paste."
msgstr ""
"Tools pool from which the algorithm\n"
"will pick the ones used for dispensing solder paste."

#: appTools/ToolSolderPaste.py:1173
msgid ""
"This is the Tool Number.\n"
"The solder dispensing will start with the tool with the biggest \n"
"diameter, continuing until there are no more Nozzle tools.\n"
"If there are no longer tools but there are still pads not covered\n"
" with solder paste, the app will issue a warning message box."
msgstr ""
"This is the Tool Number.\n"
"The solder dispensing will start with the tool with the biggest \n"
"diameter, continuing until there are no more Nozzle tools.\n"
"If there are no longer tools but there are still pads not covered\n"
" with solder paste, the app will issue a warning message box."

#: appTools/ToolSolderPaste.py:1180
msgid ""
"Nozzle tool Diameter. It's value (in current FlatCAM units)\n"
"is the width of the solder paste dispensed."
msgstr ""
"Nozzle tool Diameter. It's value (in current FlatCAM units)\n"
"is the width of the solder paste dispensed."

#: appTools/ToolSolderPaste.py:1187
msgid "New Nozzle Tool"
msgstr "New Nozzle Tool"

#: appTools/ToolSolderPaste.py:1206
msgid ""
"Add a new nozzle tool to the Tool Table\n"
"with the diameter specified above."
msgstr ""
"Add a new nozzle tool to the Tool Table\n"
"with the diameter specified above."

#: appTools/ToolSolderPaste.py:1228
msgid "STEP 1"
msgstr "STEP 1"

#: appTools/ToolSolderPaste.py:1230
msgid ""
"First step is to select a number of nozzle tools for usage\n"
"and then optionally modify the GCode parameters below."
msgstr ""
"First step is to select a number of nozzle tools for usage\n"
"and then optionally modify the GCode parameters below."

#: appTools/ToolSolderPaste.py:1233
msgid ""
"Select tools.\n"
"Modify parameters."
msgstr ""
"Select tools.\n"
"Modify parameters."

#: appTools/ToolSolderPaste.py:1353
msgid ""
"Feedrate (speed) while moving up vertically\n"
" to Dispense position (on Z plane)."
msgstr ""
"Feedrate (speed) while moving up vertically\n"
" to Dispense position (on Z plane)."

#: appTools/ToolSolderPaste.py:1423
msgid ""
"Generate GCode for Solder Paste dispensing\n"
"on PCB pads."
msgstr ""
"Generate GCode for Solder Paste dispensing\n"
"on PCB pads."

#: appTools/ToolSolderPaste.py:1444
msgid "STEP 2"
msgstr "STEP 2"

#: appTools/ToolSolderPaste.py:1446
msgid ""
"Second step is to create a solder paste dispensing\n"
"geometry out of an Solder Paste Mask Gerber file."
msgstr ""
"Second step is to create a solder paste dispensing\n"
"geometry out of an Solder Paste Mask Gerber file."

#: appTools/ToolSolderPaste.py:1450
msgid "Generate Geo"
msgstr "Generate Geo"

#: appTools/ToolSolderPaste.py:1452
msgid "Generate solder paste dispensing geometry."
msgstr "Generate solder paste dispensing geometry."

#: appTools/ToolSolderPaste.py:1475
msgid "Geo Result"
msgstr "Geo Result"

#: appTools/ToolSolderPaste.py:1477
msgid ""
"Geometry Solder Paste object.\n"
"The name of the object has to end in:\n"
"'_solderpaste' as a protection."
msgstr ""
"Geometry Solder Paste object.\n"
"The name of the object has to end in:\n"
"'_solderpaste' as a protection."

#: appTools/ToolSolderPaste.py:1486
msgid "STEP 3"
msgstr "STEP 3"

#: appTools/ToolSolderPaste.py:1488
msgid ""
"Third step is to select a solder paste dispensing geometry,\n"
"and then generate a CNCJob object.\n"
"\n"
"REMEMBER: if you want to create a CNCJob with new parameters,\n"
"first you need to generate a geometry with those new params,\n"
"and only after that you can generate an updated CNCJob."
msgstr ""
"Third step is to select a solder paste dispensing geometry,\n"
"and then generate a CNCJob object.\n"
"\n"
"REMEMBER: if you want to create a CNCJob with new parameters,\n"
"first you need to generate a geometry with those new params,\n"
"and only after that you can generate an updated CNCJob."

#: appTools/ToolSolderPaste.py:1509
msgid "CNC Result"
msgstr "CNC Result"

#: appTools/ToolSolderPaste.py:1511
msgid ""
"CNCJob Solder paste object.\n"
"In order to enable the GCode save section,\n"
"the name of the object has to end in:\n"
"'_solderpaste' as a protection."
msgstr ""
"CNCJob Solder paste object.\n"
"In order to enable the GCode save section,\n"
"the name of the object has to end in:\n"
"'_solderpaste' as a protection."

#: appTools/ToolSolderPaste.py:1521
msgid "View GCode"
msgstr "View GCode"

#: appTools/ToolSolderPaste.py:1523
msgid ""
"View the generated GCode for Solder Paste dispensing\n"
"on PCB pads."
msgstr ""
"View the generated GCode for Solder Paste dispensing\n"
"on PCB pads."

#: appTools/ToolSolderPaste.py:1533
msgid "Save GCode"
msgstr "Save GCode"

#: appTools/ToolSolderPaste.py:1535
msgid ""
"Save the generated GCode for Solder Paste dispensing\n"
"on PCB pads, to a file."
msgstr ""
"Save the generated GCode for Solder Paste dispensing\n"
"on PCB pads, to a file."

#: appTools/ToolSolderPaste.py:1545
msgid "STEP 4"
msgstr "STEP 4"

#: appTools/ToolSolderPaste.py:1547
msgid ""
"Fourth step (and last) is to select a CNCJob made from \n"
"a solder paste dispensing geometry, and then view/save it's GCode."
msgstr ""
"Fourth step (and last) is to select a CNCJob made from \n"
"a solder paste dispensing geometry, and then view/save it's GCode."

#: appTools/ToolSub.py:126
msgid "Sub Tool"
msgstr "Sub Tool"

#: appTools/ToolSub.py:151 appTools/ToolSub.py:383
msgid "No Target object loaded."
msgstr "No Target object loaded."

#: appTools/ToolSub.py:154
msgid "Loading geometry from Gerber objects."
msgstr "Loading geometry from Gerber objects."

#: appTools/ToolSub.py:171 appTools/ToolSub.py:396
msgid "No Subtractor object loaded."
msgstr "No Subtractor object loaded."

#: appTools/ToolSub.py:221
msgid "Finished parsing geometry for aperture"
msgstr "Finished parsing geometry for aperture"

#: appTools/ToolSub.py:223
msgid "Subtraction aperture processing finished."
msgstr "Subtraction aperture processing finished."

#: appTools/ToolSub.py:353 appTools/ToolSub.py:547
msgid "New object ..."
msgstr "New object ..."

#: appTools/ToolSub.py:356 appTools/ToolSub.py:550 appTools/ToolSub.py:632
msgid "Generating new object failed."
msgstr "Generating new object failed."

#: appTools/ToolSub.py:360 appTools/ToolSub.py:555
msgid "Created"
msgstr "Created"

#: appTools/ToolSub.py:409
msgid "Currently, the Subtractor geometry cannot be of type Multigeo."
msgstr "Currently, the Subtractor geometry cannot be of type Multigeo."

#: appTools/ToolSub.py:449
msgid "Parsing solid_geometry ..."
msgstr "Parsing solid_geometry ..."

#: appTools/ToolSub.py:451
msgid "Parsing solid_geometry for tool"
msgstr "Parsing solid_geometry for tool"

#: appTools/ToolSub.py:707
msgid ""
"Gerber object from which to subtract\n"
"the subtractor Gerber object."
msgstr ""
"Gerber object from which to subtract\n"
"the subtractor Gerber object."

#: appTools/ToolSub.py:721 appTools/ToolSub.py:774
msgid "Subtractor"
msgstr "Subtractor"

#: appTools/ToolSub.py:723
msgid ""
"Gerber object that will be subtracted\n"
"from the target Gerber object."
msgstr ""
"Gerber object that will be subtracted\n"
"from the target Gerber object."

#: appTools/ToolSub.py:730
msgid "Subtract Gerber"
msgstr "Subtract Gerber"

#: appTools/ToolSub.py:733
msgid ""
"Will remove the area occupied by the subtractor\n"
"Gerber from the Target Gerber.\n"
"Can be used to remove the overlapping silkscreen\n"
"over the soldermask."
msgstr ""
"Will remove the area occupied by the subtractor\n"
"Gerber from the Target Gerber.\n"
"Can be used to remove the overlapping silkscreen\n"
"over the soldermask."

#: appTools/ToolSub.py:760
msgid ""
"Geometry object from which to subtract\n"
"the subtractor Geometry object."
msgstr ""
"Geometry object from which to subtract\n"
"the subtractor Geometry object."

#: appTools/ToolSub.py:776
msgid ""
"Geometry object that will be subtracted\n"
"from the target Geometry object."
msgstr ""
"Geometry object that will be subtracted\n"
"from the target Geometry object."

#: appTools/ToolSub.py:784
msgid ""
"Checking this will close the paths cut by the Geometry subtractor object."
msgstr ""
"Checking this will close the paths cut by the Geometry subtractor object."

#: appTools/ToolSub.py:788
msgid "Subtract Geometry"
msgstr "Subtract Geometry"

#: appTools/ToolSub.py:791
msgid ""
"Will remove the area occupied by the subtractor\n"
"Geometry from the Target Geometry."
msgstr ""
"Will remove the area occupied by the subtractor\n"
"Geometry from the Target Geometry."

#: appTools/ToolTransform.py:293
msgid "No object selected. Please Select an object to rotate!"
msgstr "No object selected. Please Select an object to rotate!"

#: appTools/ToolTransform.py:301
msgid "CNCJob objects can't be rotated."
msgstr "CNCJob objects can't be rotated."

#: appTools/ToolTransform.py:309
msgid "Rotate done"
msgstr "Rotate done"

#: appTools/ToolTransform.py:312 appTools/ToolTransform.py:353
#: appTools/ToolTransform.py:386 appTools/ToolTransform.py:414
msgid "Due of"
msgstr "Due of"

#: appTools/ToolTransform.py:312 appTools/ToolTransform.py:353
#: appTools/ToolTransform.py:386 appTools/ToolTransform.py:414
msgid "action was not executed."
msgstr "action was not executed."

#: appTools/ToolTransform.py:319
msgid "No object selected. Please Select an object to flip"
msgstr "No object selected. Please Select an object to flip"

#: appTools/ToolTransform.py:329
msgid "CNCJob objects can't be mirrored/flipped."
msgstr "CNCJob objects can't be mirrored/flipped."

#: appTools/ToolTransform.py:361
msgid "Skew transformation can not be done for 0, 90 and 180 degrees."
msgstr "Skew transformation can not be done for 0, 90 and 180 degrees."

#: appTools/ToolTransform.py:366
msgid "No object selected. Please Select an object to shear/skew!"
msgstr "No object selected. Please Select an object to shear/skew!"

#: appTools/ToolTransform.py:375
msgid "CNCJob objects can't be skewed."
msgstr "CNCJob objects can't be skewed."

#: appTools/ToolTransform.py:383
msgid "Skew on the"
msgstr "Skew on the"

#: appTools/ToolTransform.py:383 appTools/ToolTransform.py:411
#: appTools/ToolTransform.py:441
msgid "axis done"
msgstr "axis done"

#: appTools/ToolTransform.py:393
msgid "No object selected. Please Select an object to scale!"
msgstr "No object selected. Please Select an object to scale!"

#: appTools/ToolTransform.py:402
msgid "CNCJob objects can't be scaled."
msgstr "CNCJob objects can't be scaled."

#: appTools/ToolTransform.py:411
msgid "Scale on the"
msgstr "Scale on the"

#: appTools/ToolTransform.py:421
msgid "No object selected. Please Select an object to offset!"
msgstr "No object selected. Please Select an object to offset!"

#: appTools/ToolTransform.py:428
msgid "CNCJob objects can't be offset."
msgstr "CNCJob objects can't be offset."

#: appTools/ToolTransform.py:441
msgid "Offset on the"
msgstr "Offset on the"

#: appTools/ToolTransform.py:450
msgid "No object selected. Please Select an object to buffer!"
msgstr "No object selected. Please Select an object to buffer!"

#: appTools/ToolTransform.py:457
msgid "CNCJob objects can't be buffered."
msgstr "CNCJob objects can't be buffered."

#: appTools/ToolTransform.py:512
msgid "Object Transform"
msgstr "Object Transform"

#: appTools/ToolTransform.py:603
msgid ""
"The object used as reference.\n"
"The used point is the center of it's bounding box."
msgstr ""
"The object used as reference.\n"
"The used point is the center of it's bounding box."

#: appTranslation.py:104
msgid "The application will restart."
msgstr "The application will restart."

#: appTranslation.py:106
msgid "Are you sure do you want to change the current language to"
msgstr "Are you sure do you want to change the current language to"

#: appTranslation.py:107
msgid "Apply Language ..."
msgstr "Apply Language ..."

#: appTranslation.py:206 app_Main.py:3518
msgid ""
"There are files/objects modified in FlatCAM. \n"
"Do you want to Save the project?"
msgstr ""
"There are files/objects modified in FlatCAM. \n"
"Do you want to Save the project?"

#: app_Main.py:500
msgid "The application is initializing ..."
msgstr "The application is initializing ..."

#: app_Main.py:644
msgid "Could not find the Language files. The App strings are missing."
msgstr "Could not find the Language files. The App strings are missing."

#: app_Main.py:716
msgid ""
"The application is initializing ...\n"
"Canvas initialization started."
msgstr ""
"The application is initializing ...\n"
"Canvas initialization started."

#: app_Main.py:736
msgid ""
"The application is initializing ...\n"
"Canvas initialization started.\n"
"Canvas initialization finished in"
msgstr ""
"The application is initializing ...\n"
"Canvas initialization started.\n"
"Canvas initialization finished in"

#: app_Main.py:1271 app_Main.py:9104
msgid "New Project - Not saved"
msgstr "New Project - Not saved"

#: app_Main.py:1734
msgid ""
"Found old default preferences files. Please reboot the application to update."
msgstr ""
"Found old default preferences files. Please reboot the application to update."

#: app_Main.py:1801
msgid "Open Config file failed."
msgstr "Open Config file failed."

#: app_Main.py:1816
msgid "Open Script file failed."
msgstr "Open Script file failed."

#: app_Main.py:1842
msgid "Open Excellon file failed."
msgstr "Open Excellon file failed."

#: app_Main.py:1855
msgid "Open GCode file failed."
msgstr "Open GCode file failed."

#: app_Main.py:1868
msgid "Open Gerber file failed."
msgstr "Open Gerber file failed."

#: app_Main.py:2369
msgid "Select a Geometry, Gerber, Excellon or CNCJob Object to edit."
msgstr "Select a Geometry, Gerber, Excellon or CNCJob Object to edit."

#: app_Main.py:2384
msgid ""
"Simultaneous editing of tools geometry in a MultiGeo Geometry is not "
"possible.\n"
"Edit only one geometry at a time."
msgstr ""
"Simultaneous editing of tools geometry in a MultiGeo Geometry is not "
"possible.\n"
"Edit only one geometry at a time."

#: app_Main.py:2469
msgid "EDITOR Area"
msgstr "EDITOR Area"

#: app_Main.py:2472
msgid "Editor is activated ..."
msgstr "Editor is activated ..."

#: app_Main.py:2493
msgid "Do you want to save the edited object?"
msgstr "Do you want to save the edited object?"

#: app_Main.py:2534
msgid "Object empty after edit."
msgstr "Object empty after edit."

#: app_Main.py:2539 app_Main.py:2557 app_Main.py:2588 app_Main.py:2604
msgid "Editor exited. Editor content saved."
msgstr "Editor exited. Editor content saved."

#: app_Main.py:2608 app_Main.py:2648
msgid "Select a Gerber, Geometry, Excellon or CNCJob Object to update."
msgstr "Select a Gerber, Geometry, Excellon or CNCJob Object to update."

#: app_Main.py:2611
msgid "is updated, returning to App..."
msgstr "is updated, returning to App..."

#: app_Main.py:2623
msgid "Editor exited. Editor content was not saved."
msgstr "Editor exited. Editor content was not saved."

#: app_Main.py:2671
msgid "Select a Gerber, Geometry or Excellon Object to update."
msgstr "Select a Gerber, Geometry or Excellon Object to update."

#: app_Main.py:2789 app_Main.py:2795
msgid "Save to file"
msgstr "Save to file"

#: app_Main.py:2820
msgid "Could not load the file."
msgstr "Could not load the file."

#: app_Main.py:2836
msgid "Exported file to"
msgstr "Exported file to"

#: app_Main.py:2873
msgid "Failed to open recent files file for writing."
msgstr "Failed to open recent files file for writing."

#: app_Main.py:2884
msgid "Failed to open recent projects file for writing."
msgstr "Failed to open recent projects file for writing."

#: app_Main.py:2939
msgid "2D Computer-Aided Printed Circuit Board Manufacturing"
msgstr "2D Computer-Aided Printed Circuit Board Manufacturing"

#: app_Main.py:2940
msgid "Development"
msgstr "Development"

#: app_Main.py:2941
msgid "DOWNLOAD"
msgstr "DOWNLOAD"

#: app_Main.py:2942
msgid "Issue tracker"
msgstr "Issue tracker"

#: app_Main.py:2946 app_Main.py:3325 app_Main.py:3498
msgid "Close"
msgstr "Close"

#: app_Main.py:2961
msgid "Licensed under the MIT license"
msgstr "Licensed under the MIT license"

#: app_Main.py:2970
msgid ""
"Permission is hereby granted, free of charge, to any person obtaining a "
"copy\n"
"of this software and associated documentation files (the \"Software\"), to "
"deal\n"
"in the Software without restriction, including without limitation the "
"rights\n"
"to use, copy, modify, merge, publish, distribute, sublicense, and/or sell\n"
"copies of the Software, and to permit persons to whom the Software is\n"
"furnished to do so, subject to the following conditions:\n"
"\n"
"The above copyright notice and this permission notice shall be included in\n"
"all copies or substantial portions of the Software.\n"
"\n"
"THE SOFTWARE IS PROVIDED \"AS IS\", WITHOUT WARRANTY OF ANY KIND, EXPRESS "
"OR\n"
"IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,\n"
"FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE\n"
"AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER\n"
"LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING "
"FROM,\n"
"OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN\n"
"THE SOFTWARE."
msgstr ""
"Permission is hereby granted, free of charge, to any person obtaining a "
"copy\n"
"of this software and associated documentation files (the \"Software\"), to "
"deal\n"
"in the Software without restriction, including without limitation the "
"rights\n"
"to use, copy, modify, merge, publish, distribute, sublicense, and/or sell\n"
"copies of the Software, and to permit persons to whom the Software is\n"
"furnished to do so, subject to the following conditions:\n"
"\n"
"The above copyright notice and this permission notice shall be included in\n"
"all copies or substantial portions of the Software.\n"
"\n"
"THE SOFTWARE IS PROVIDED \"AS IS\", WITHOUT WARRANTY OF ANY KIND, EXPRESS "
"OR\n"
"IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,\n"
"FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE\n"
"AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER\n"
"LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING "
"FROM,\n"
"OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN\n"
"THE SOFTWARE."

#: app_Main.py:2992
msgid ""
"Some of the icons used are from the following sources:<br><div>Icons by <a "
"href=\"https://www.flaticon.com/authors/freepik\" title=\"Freepik\">Freepik</"
"a> from <a href=\"https://www.flaticon.com/\"             title=\"Flaticon"
"\">www.flaticon.com</a></div><div>Icons by <a target=\"_blank\" href="
"\"https://icons8.com\">Icons8</a></div>Icons by <a href=\"http://www."
"onlinewebfonts.com\">oNline Web Fonts</a><div>Icons by <a href=\"https://www."
"flaticon.com/authors/pixel-perfect\" title=\"Pixel perfect\">Pixel perfect</"
"a> from <a href=\"https://www.flaticon.com/\" title=\"Flaticon\">www."
"flaticon.com</a></div>"
msgstr ""
"Some of the icons used are from the following sources:<br><div>Icons by <a "
"href=\"https://www.flaticon.com/authors/freepik\" title=\"Freepik\">Freepik</"
"a> from <a href=\"https://www.flaticon.com/\"             title=\"Flaticon"
"\">www.flaticon.com</a></div><div>Icons by <a target=\"_blank\" href="
"\"https://icons8.com\">Icons8</a></div>Icons by <a href=\"http://www."
"onlinewebfonts.com\">oNline Web Fonts</a><div>Icons by <a href=\"https://www."
"flaticon.com/authors/pixel-perfect\" title=\"Pixel perfect\">Pixel perfect</"
"a> from <a href=\"https://www.flaticon.com/\" title=\"Flaticon\">www."
"flaticon.com</a></div>"

#: app_Main.py:3028
msgid "Splash"
msgstr "Splash"

#: app_Main.py:3034
msgid "Programmers"
msgstr "Programmers"

#: app_Main.py:3040
msgid "Translators"
msgstr "Translators"

#: app_Main.py:3046
msgid "License"
msgstr "License"

#: app_Main.py:3052
msgid "Attributions"
msgstr "Attributions"

#: app_Main.py:3075
msgid "Programmer"
msgstr "Programmer"

#: app_Main.py:3076
msgid "Status"
msgstr "Status"

#: app_Main.py:3077 app_Main.py:3157
msgid "E-mail"
msgstr "E-mail"

#: app_Main.py:3080
msgid "Program Author"
msgstr "Program Author"

#: app_Main.py:3085
msgid "BETA Maintainer >= 2019"
msgstr "BETA Maintainer >= 2019"

#: app_Main.py:3154
msgid "Language"
msgstr "Language"

#: app_Main.py:3155
msgid "Translator"
msgstr "Translator"

#: app_Main.py:3156
msgid "Corrections"
msgstr "Corrections"

#: app_Main.py:3293
#, python-format
msgid "This program is %s and free in a very wide meaning of the word."
msgstr "This program is %s and free in a very wide meaning of the word."

#: app_Main.py:3294
msgid "Yet it cannot evolve without <b>contributions</b>."
msgstr "Yet it cannot evolve without <b>contributions</b>."

#: app_Main.py:3295
msgid "If you want to see this application grow and become better and better"
msgstr "If you want to see this application grow and become better and better"

#: app_Main.py:3296
msgid "you can <b>contribute</b> to the development yourself by:"
msgstr "you can <b>contribute</b> to the development yourself by:"

#: app_Main.py:3297
msgid "Pull Requests on the Bitbucket repository, if you are a developer"
msgstr "Pull Requests on the Bitbucket repository, if you are a developer"

#: app_Main.py:3299
msgid "Bug Reports by providing the steps required to reproduce the bug"
msgstr "Bug Reports by providing the steps required to reproduce the bug"

#: app_Main.py:3301
msgid "If you like what you have seen so far ..."
msgstr "If you like what you have seen so far ..."

#: app_Main.py:3302
msgid "Donations are NOT required."
msgstr "Donations are NOT required."

#: app_Main.py:3302
msgid "But they are welcomed"
msgstr "But they are welcomed"

#: app_Main.py:3333
msgid "Contribute"
msgstr "Contribute"

#: app_Main.py:3356
msgid "Links Exchange"
msgstr "Links Exchange"

#: app_Main.py:3368 app_Main.py:3387
msgid "Soon ..."
msgstr "Soon ..."

#: app_Main.py:3375
msgid "How To's"
msgstr "How To's"

#: app_Main.py:3487
msgid ""
"This entry will resolve to another website if:\n"
"\n"
"1. FlatCAM.org website is down\n"
"2. Someone forked FlatCAM project and wants to point\n"
"to his own website\n"
"\n"
"If you can't get any informations about the application\n"
"use the YouTube channel link from the Help menu."
msgstr ""
"This entry will resolve to another website if:\n"
"\n"
"1. FlatCAM.org website is down\n"
"2. Someone forked FlatCAM project and wants to point\n"
"to his own website\n"
"\n"
"If you can't get any informations about the application\n"
"use the YouTube channel link from the Help menu."

#: app_Main.py:3494
msgid "Alternative website"
msgstr "Alternative website"

#: app_Main.py:3836
msgid "Selected Excellon file extensions registered with FlatCAM."
msgstr "Selected Excellon file extensions registered with FlatCAM."

#: app_Main.py:3853
msgid "Selected GCode file extensions registered with FlatCAM."
msgstr "Selected GCode file extensions registered with FlatCAM."

#: app_Main.py:3869
msgid "Selected Gerber file extensions registered with FlatCAM."
msgstr "Selected Gerber file extensions registered with FlatCAM."

#: app_Main.py:4057 app_Main.py:4118 app_Main.py:4148
msgid "At least two objects are required for join. Objects currently selected"
msgstr "At least two objects are required for join. Objects currently selected"

#: app_Main.py:4066
msgid ""
"Failed join. The Geometry objects are of different types.\n"
"At least one is MultiGeo type and the other is SingleGeo type. A possibility "
"is to convert from one to another and retry joining \n"
"but in the case of converting from MultiGeo to SingleGeo, informations may "
"be lost and the result may not be what was expected. \n"
"Check the generated GCODE."
msgstr ""
"Failed join. The Geometry objects are of different types.\n"
"At least one is MultiGeo type and the other is SingleGeo type. A possibility "
"is to convert from one to another and retry joining \n"
"but in the case of converting from MultiGeo to SingleGeo, informations may "
"be lost and the result may not be what was expected. \n"
"Check the generated GCODE."

#: app_Main.py:4080 app_Main.py:4090
msgid "Geometry merging finished"
msgstr "Geometry merging finished"

#: app_Main.py:4113
msgid "Failed. Excellon joining works only on Excellon objects."
msgstr "Failed. Excellon joining works only on Excellon objects."

#: app_Main.py:4125
msgid "Excellon merging finished"
msgstr "Excellon merging finished"

#: app_Main.py:4143
msgid "Failed. Gerber joining works only on Gerber objects."
msgstr "Failed. Gerber joining works only on Gerber objects."

#: app_Main.py:4153
msgid "Gerber merging finished"
msgstr "Gerber merging finished"

#: app_Main.py:4173 app_Main.py:4210
msgid "Failed. Select a Geometry Object and try again."
msgstr "Failed. Select a Geometry Object and try again."

#: app_Main.py:4177 app_Main.py:4215
msgid "Expected a GeometryObject, got"
msgstr "Expected a GeometryObject, got"

#: app_Main.py:4192
msgid "A Geometry object was converted to MultiGeo type."
msgstr "A Geometry object was converted to MultiGeo type."

#: app_Main.py:4230
msgid "A Geometry object was converted to SingleGeo type."
msgstr "A Geometry object was converted to SingleGeo type."

#: app_Main.py:4467
msgid ""
"Changing the units of the project\n"
"will scale all objects.\n"
"\n"
"Do you want to continue?"
msgstr ""
"Changing the units of the project\n"
"will scale all objects.\n"
"\n"
"Do you want to continue?"

#: app_Main.py:4470 app_Main.py:4634 app_Main.py:4723 app_Main.py:8517
#: app_Main.py:8532 app_Main.py:8876 app_Main.py:8888
msgid "Ok"
msgstr "Ok"

#: app_Main.py:4520
msgid "Converted units to"
msgstr "Converted units to"

#: app_Main.py:4560
msgid "Workspace enabled."
msgstr "Workspace enabled."

#: app_Main.py:4563
msgid "Workspace disabled."
msgstr "Workspace disabled."

#: app_Main.py:4628
msgid ""
"Adding Tool works only when Advanced is checked.\n"
"Go to Preferences -> General - Show Advanced Options."
msgstr ""
"Adding Tool works only when Advanced is checked.\n"
"Go to Preferences -> General - Show Advanced Options."

#: app_Main.py:4716
msgid "Delete objects"
msgstr "Delete objects"

#: app_Main.py:4721
msgid ""
"Are you sure you want to permanently delete\n"
"the selected objects?"
msgstr ""
"Are you sure you want to permanently delete\n"
"the selected objects?"

#: app_Main.py:4764
msgid "Object(s) deleted"
msgstr "Object(s) deleted"

#: app_Main.py:4768
msgid "Save the work in Editor and try again ..."
msgstr "Save the work in Editor and try again ..."

#: app_Main.py:4797
msgid "Object deleted"
msgstr "Object deleted"

#: app_Main.py:4824
msgid "Click to set the origin ..."
msgstr "Click to set the origin ..."

#: app_Main.py:4846
msgid "Setting Origin..."
msgstr "Setting Origin..."

#: app_Main.py:4859 app_Main.py:4961
msgid "Origin set"
msgstr "Origin set"

#: app_Main.py:4876
msgid "Origin coordinates specified but incomplete."
msgstr "Origin coordinates specified but incomplete."

#: app_Main.py:4917
msgid "Moving to Origin..."
msgstr "Moving to Origin..."

#: app_Main.py:4998
msgid "Jump to ..."
msgstr "Jump to ..."

#: app_Main.py:4999
msgid "Enter the coordinates in format X,Y:"
msgstr "Enter the coordinates in format X,Y:"

#: app_Main.py:5009
msgid "Wrong coordinates. Enter coordinates in format: X,Y"
msgstr "Wrong coordinates. Enter coordinates in format: X,Y"

#: app_Main.py:5126
msgid "Bottom-Left"
msgstr "Bottom-Left"

#: app_Main.py:5129
msgid "Top-Right"
msgstr "Top-Right"

#: app_Main.py:5150
msgid "Locate ..."
msgstr "Locate ..."

#: app_Main.py:5436 app_Main.py:5514 app_Main.py:5684
msgid "No object is selected. Select an object and try again."
msgstr "No object is selected. Select an object and try again."

#: app_Main.py:5710
msgid ""
"Aborting. The current task will be gracefully closed as soon as possible..."
msgstr ""
"Aborting. The current task will be gracefully closed as soon as possible..."

#: app_Main.py:5716
msgid "The current task was gracefully closed on user request..."
msgstr "The current task was gracefully closed on user request..."

#: app_Main.py:5956
msgid "Adding tool from DB is not allowed for this object."
msgstr "Adding tool from DB is not allowed for this object."

#: app_Main.py:5974
msgid ""
"One or more Tools are edited.\n"
"Do you want to update the Tools Database?"
msgstr ""
"One or more Tools are edited.\n"
"Do you want to update the Tools Database?"

#: app_Main.py:5976
msgid "Save Tools Database"
msgstr "Save Tools Database"

#: app_Main.py:6022
msgid "No object selected to Flip on Y axis."
msgstr "No object selected to Flip on Y axis."

#: app_Main.py:6048
msgid "Flip on Y axis done."
msgstr "Flip on Y axis done."

#: app_Main.py:6069
msgid "No object selected to Flip on X axis."
msgstr "No object selected to Flip on X axis."

#: app_Main.py:6095
msgid "Flip on X axis done."
msgstr "Flip on X axis done."

#: app_Main.py:6117
msgid "No object selected to Rotate."
msgstr "No object selected to Rotate."

#: app_Main.py:6120 app_Main.py:6172 app_Main.py:6210
msgid "Enter the Angle value:"
msgstr "Enter the Angle value:"

#: app_Main.py:6151
msgid "Rotation done."
msgstr "Rotation done."

#: app_Main.py:6153
msgid "Rotation movement was not executed."
msgstr "Rotation movement was not executed."

#: app_Main.py:6170
msgid "No object selected to Skew/Shear on X axis."
msgstr "No object selected to Skew/Shear on X axis."

#: app_Main.py:6192
msgid "Skew on X axis done."
msgstr "Skew on X axis done."

#: app_Main.py:6208
msgid "No object selected to Skew/Shear on Y axis."
msgstr "No object selected to Skew/Shear on Y axis."

#: app_Main.py:6230
msgid "Skew on Y axis done."
msgstr "Skew on Y axis done."

#: app_Main.py:6312
msgid "New Grid ..."
msgstr "New Grid ..."

#: app_Main.py:6313
msgid "Enter a Grid Value:"
msgstr "Enter a Grid Value:"

#: app_Main.py:6322 app_Main.py:6347
msgid "Please enter a grid value with non-zero value, in Float format."
msgstr "Please enter a grid value with non-zero value, in Float format."

#: app_Main.py:6327
msgid "New Grid added"
msgstr "New Grid added"

#: app_Main.py:6329
msgid "Grid already exists"
msgstr "Grid already exists"

#: app_Main.py:6331
msgid "Adding New Grid cancelled"
msgstr "Adding New Grid cancelled"

#: app_Main.py:6353
msgid " Grid Value does not exist"
msgstr " Grid Value does not exist"

#: app_Main.py:6355
msgid "Grid Value deleted"
msgstr "Grid Value deleted"

#: app_Main.py:6357
msgid "Delete Grid value cancelled"
msgstr "Delete Grid value cancelled"

#: app_Main.py:6363
msgid "Key Shortcut List"
msgstr "Key Shortcut List"

#: app_Main.py:6400
msgid " No object selected to copy it's name"
msgstr " No object selected to copy it's name"

#: app_Main.py:6404
msgid "Name copied on clipboard ..."
msgstr "Name copied on clipboard ..."

#: app_Main.py:7170 app_Main.py:7174
msgid "Select an Gerber or Excellon file to view it's source file."
msgstr "Select an Gerber or Excellon file to view it's source file."

#: app_Main.py:7177
msgid "Viewing the source code of the selected object."
msgstr "Viewing the source code of the selected object."

#: app_Main.py:7191
msgid "Source Editor"
msgstr "Source Editor"

#: app_Main.py:7227 app_Main.py:7234
msgid "There is no selected object for which to see it's source file code."
msgstr "There is no selected object for which to see it's source file code."

#: app_Main.py:7242
msgid "Failed to load the source code for the selected object"
msgstr "Failed to load the source code for the selected object"

#: app_Main.py:7275
msgid "Go to Line ..."
msgstr "Go to Line ..."

#: app_Main.py:7276
msgid "Line:"
msgstr "Line:"

#: app_Main.py:7306
msgid "Redrawing all objects"
msgstr "Redrawing all objects"

#: app_Main.py:7394
msgid "Failed to load recent item list."
msgstr "Failed to load recent item list."

#: app_Main.py:7401
msgid "Failed to parse recent item list."
msgstr "Failed to parse recent item list."

#: app_Main.py:7411
msgid "Failed to load recent projects item list."
msgstr "Failed to load recent projects item list."

#: app_Main.py:7418
msgid "Failed to parse recent project item list."
msgstr "Failed to parse recent project item list."

#: app_Main.py:7479
msgid "Clear Recent projects"
msgstr "Clear Recent projects"

#: app_Main.py:7503
msgid "Clear Recent files"
msgstr "Clear Recent files"

#: app_Main.py:7559
msgid "FlatCAM Evo"
msgstr "FlatCAM Evo"

#: app_Main.py:7563
msgid "Release date"
msgstr "Release date"

#: app_Main.py:7567
msgid "Displayed"
msgstr "Displayed"

#: app_Main.py:7570
msgid "Snap"
msgstr "Snap"

#: app_Main.py:7579
msgid "Canvas"
msgstr "Canvas"

#: app_Main.py:7584
msgid "Workspace active"
msgstr "Workspace active"

#: app_Main.py:7588
msgid "Workspace size"
msgstr "Workspace size"

#: app_Main.py:7592
msgid "Workspace orientation"
msgstr "Workspace orientation"

#: app_Main.py:7654
msgid "Failed checking for latest version. Could not connect."
msgstr "Failed checking for latest version. Could not connect."

#: app_Main.py:7661
msgid "Could not parse information about latest version."
msgstr "Could not parse information about latest version."

#: app_Main.py:7671
msgid "FlatCAM is up to date!"
msgstr "FlatCAM is up to date!"

#: app_Main.py:7676
msgid "Newer Version Available"
msgstr "Newer Version Available"

#: app_Main.py:7678
msgid "There is a newer version of FlatCAM available for download:"
msgstr "There is a newer version of FlatCAM available for download:"

#: app_Main.py:7682
msgid "info"
msgstr "info"

#: app_Main.py:7710
msgid ""
"OpenGL canvas initialization failed. HW or HW configuration not supported."
"Change the graphic engine to Legacy(2D) in Edit -> Preferences -> General "
"tab.\n"
"\n"
msgstr ""
"OpenGL canvas initialization failed. HW or HW configuration not supported."
"Change the graphic engine to Legacy(2D) in Edit -> Preferences -> General "
"tab.\n"
"\n"

#: app_Main.py:7787
msgid "All plots disabled."
msgstr "All plots disabled."

#: app_Main.py:7793
msgid "All non selected plots disabled."
msgstr "All non selected plots disabled."

#: app_Main.py:7799
msgid "All plots enabled."
msgstr "All plots enabled."

#: app_Main.py:7805
msgid "All non selected plots enabled."
msgstr "All non selected plots enabled."

#: app_Main.py:7811
msgid "Selected plots enabled..."
msgstr "Selected plots enabled..."

#: app_Main.py:7819
msgid "Selected plots disabled..."
msgstr "Selected plots disabled..."

#: app_Main.py:7853
msgid "Enabling plots ..."
msgstr "Enabling plots ..."

#: app_Main.py:7900
msgid "Disabling plots ..."
msgstr "Disabling plots ..."

#: app_Main.py:8036
msgid "Set alpha level ..."
msgstr "Set alpha level ..."

#: app_Main.py:8315 app_Main.py:8354 app_Main.py:8398 app_Main.py:8464
#: app_Main.py:9205 app_Main.py:10467 app_Main.py:10529
msgid ""
"Canvas initialization started.\n"
"Canvas initialization finished in"
msgstr ""
"Canvas initialization started.\n"
"Canvas initialization finished in"

#: app_Main.py:8318
msgid "Opening Gerber file."
msgstr "Opening Gerber file."

#: app_Main.py:8357
msgid "Opening Excellon file."
msgstr "Opening Excellon file."

#: app_Main.py:8401
msgid "Opening G-Code file."
msgstr "Opening G-Code file."

#: app_Main.py:8455 app_Main.py:8459
msgid "Open HPGL2"
msgstr "Open HPGL2"

#: app_Main.py:8467
msgid "Opening HPGL2 file."
msgstr "Opening HPGL2 file."

#: app_Main.py:8490 app_Main.py:8493
msgid "Open Configuration File"
msgstr "Open Configuration File"

#: app_Main.py:8512 app_Main.py:8871
msgid "Please Select a Geometry object to export"
msgstr "Please Select a Geometry object to export"

#: app_Main.py:8527
msgid "Only Geometry, Gerber and CNCJob objects can be used."
msgstr "Only Geometry, Gerber and CNCJob objects can be used."

#: app_Main.py:8574
msgid "Data must be a 3D array with last dimension 3 or 4"
msgstr "Data must be a 3D array with last dimension 3 or 4"

#: app_Main.py:8580 app_Main.py:8585
msgid "Export PNG Image"
msgstr "Export PNG Image"

#: app_Main.py:8618 app_Main.py:8830
msgid "Failed. Only Gerber objects can be saved as Gerber files..."
msgstr "Failed. Only Gerber objects can be saved as Gerber files..."

#: app_Main.py:8631
msgid "Save Gerber source file"
msgstr "Save Gerber source file"

#: app_Main.py:8660
msgid "Failed. Only Script objects can be saved as TCL Script files..."
msgstr "Failed. Only Script objects can be saved as TCL Script files..."

#: app_Main.py:8673
msgid "Save Script source file"
msgstr "Save Script source file"

#: app_Main.py:8702
msgid "Failed. Only Document objects can be saved as Document files..."
msgstr "Failed. Only Document objects can be saved as Document files..."

#: app_Main.py:8715
msgid "Save Document source file"
msgstr "Save Document source file"

#: app_Main.py:8744 app_Main.py:8785 app_Main.py:9711
msgid "Failed. Only Excellon objects can be saved as Excellon files..."
msgstr "Failed. Only Excellon objects can be saved as Excellon files..."

#: app_Main.py:8752 app_Main.py:8757
msgid "Save Excellon source file"
msgstr "Save Excellon source file"

#: app_Main.py:8883
msgid "Only Geometry objects can be used."
msgstr "Only Geometry objects can be used."

#: app_Main.py:8929 app_Main.py:8933
msgid "Import SVG"
msgstr "Import SVG"

#: app_Main.py:8959 app_Main.py:8963
msgid "Import DXF"
msgstr "Import DXF"

#: app_Main.py:8989
msgid ""
"There are files/objects opened in FlatCAM.\n"
"Creating a New project will delete them.\n"
"Do you want to Save the project?"
msgstr ""
"There are files/objects opened in FlatCAM.\n"
"Creating a New project will delete them.\n"
"Do you want to Save the project?"

#: app_Main.py:9012
msgid "New Project created"
msgstr "New Project created"

#: app_Main.py:9114
msgid "New TCL script file created in Code Editor."
msgstr "New TCL script file created in Code Editor."

#: app_Main.py:9141 app_Main.py:9143 app_Main.py:9178 app_Main.py:9180
msgid "Open TCL script"
msgstr "Open TCL script"

#: app_Main.py:9207
msgid "Executing ScriptObject file."
msgstr "Executing ScriptObject file."

#: app_Main.py:9215 app_Main.py:9219
msgid "Run TCL script"
msgstr "Run TCL script"

#: app_Main.py:9242
msgid "TCL script file opened in Code Editor and executed."
msgstr "TCL script file opened in Code Editor and executed."

#: app_Main.py:9288 app_Main.py:9295
msgid "Save Project As ..."
msgstr "Save Project As ..."

#: app_Main.py:9330
msgid "FlatCAM objects print"
msgstr "FlatCAM objects print"

#: app_Main.py:9343 app_Main.py:9351
msgid "Save Object as PDF ..."
msgstr "Save Object as PDF ..."

#: app_Main.py:9361
msgid "Printing PDF ..."
msgstr "Printing PDF ..."

#: app_Main.py:9536
msgid "PDF file saved to"
msgstr "PDF file saved to"

#: app_Main.py:9558 app_Main.py:9818 app_Main.py:9952 app_Main.py:10019
msgid "Exporting ..."
msgstr "Exporting ..."

#: app_Main.py:9601
msgid "SVG file exported to"
msgstr "SVG file exported to"

#: app_Main.py:9616 app_Main.py:9620
msgid "Import FlatCAM Preferences"
msgstr "Import FlatCAM Preferences"

#: app_Main.py:9631
msgid "Imported Defaults from"
msgstr "Imported Defaults from"

#: app_Main.py:9650 app_Main.py:9656
msgid "Export FlatCAM Preferences"
msgstr "Export FlatCAM Preferences"

#: app_Main.py:9676
msgid "Exported preferences to"
msgstr "Exported preferences to"

#: app_Main.py:9809
msgid "Excellon file exported to"
msgstr "Excellon file exported to"

#: app_Main.py:9823 app_Main.py:9830
msgid "Could not export Excellon file."
msgstr "Could not export Excellon file."

#: app_Main.py:9944
msgid "Gerber file exported to"
msgstr "Gerber file exported to"

#: app_Main.py:9957 app_Main.py:9964
msgid "Could not export file."
msgstr "Could not export file."

#: app_Main.py:10010
msgid "DXF file exported to"
msgstr "DXF file exported to"

#: app_Main.py:10024 app_Main.py:10031
msgid "Could not export DXF file."
msgstr "Could not export DXF file."

#: app_Main.py:10072 app_Main.py:10127 tclCommands/TclCommandImportSvg.py:76
msgid "Importing ..."
msgstr "Importing ..."

#: app_Main.py:10080 app_Main.py:10135
msgid "Import failed."
msgstr "Import failed."

#: app_Main.py:10165 app_Main.py:10356 app_Main.py:10421
msgid "Failed to open file"
msgstr "Failed to open file"

#: app_Main.py:10168 app_Main.py:10359 app_Main.py:10424
msgid "Failed to parse file"
msgstr "Failed to parse file"

#: app_Main.py:10180
msgid "Object is not Gerber file or empty. Aborting object creation."
msgstr "Object is not Gerber file or empty. Aborting object creation."

#: app_Main.py:10185 app_Main.py:10249 app_Main.py:10309 app_Main.py:10383
#: app_Main.py:10436 tclCommands/TclCommandOpenDXF.py:81
msgid "Opening ..."
msgstr "Opening ..."

#: app_Main.py:10196
msgid "Open Gerber failed. Probable not a Gerber file."
msgstr "Open Gerber failed. Probable not a Gerber file."

#: app_Main.py:10229
msgid "Cannot open file"
msgstr "Cannot open file"

#: app_Main.py:10259
msgid "Open Excellon file failed. Probable not an Excellon file."
msgstr "Open Excellon file failed. Probable not an Excellon file."

#: app_Main.py:10291
msgid "Reading GCode file"
msgstr "Reading GCode file"

#: app_Main.py:10304
msgid "This is not GCODE"
msgstr "This is not GCODE"

#: app_Main.py:10322
msgid ""
"Failed to create CNCJob Object. Probable not a GCode file. Try to load it "
"from File menu.\n"
" Attempting to create a FlatCAM CNCJob Object from G-Code file failed during "
"processing"
msgstr ""
"Failed to create CNCJob Object. Probable not a GCode file. Try to load it "
"from File menu.\n"
" Attempting to create a FlatCAM CNCJob Object from G-Code file failed during "
"processing"

#: app_Main.py:10378
msgid "Object is not HPGL2 file or empty. Aborting object creation."
msgstr "Object is not HPGL2 file or empty. Aborting object creation."

#: app_Main.py:10390
msgid " Open HPGL2 failed. Probable not a HPGL2 file."
msgstr " Open HPGL2 failed. Probable not a HPGL2 file."

#: app_Main.py:10416
msgid "TCL script file opened in Code Editor."
msgstr "TCL script file opened in Code Editor."

#: app_Main.py:10447
msgid "Failed to open TCL Script."
msgstr "Failed to open TCL Script."

#: app_Main.py:10470
msgid "Opening FlatCAM Config file."
msgstr "Opening FlatCAM Config file."

#: app_Main.py:10497
msgid "Failed to open config file"
msgstr "Failed to open config file"

#: app_Main.py:10526
msgid "Loading Project ... Please Wait ..."
msgstr "Loading Project ... Please Wait ..."

#: app_Main.py:10532
msgid "Opening FlatCAM Project file."
msgstr "Opening FlatCAM Project file."

#: app_Main.py:10547 app_Main.py:10551 app_Main.py:10569
msgid "Failed to open project file"
msgstr "Failed to open project file"

#: app_Main.py:10609
msgid "Loading Project ... restoring"
msgstr "Loading Project ... restoring"

#: app_Main.py:10613
msgid "Project loaded from"
msgstr "Project loaded from"

#: app_Main.py:10645
msgid "Saving Project ..."
msgstr "Saving Project ..."

#: app_Main.py:10667 app_Main.py:10703
msgid "Project saved to"
msgstr "Project saved to"

#: app_Main.py:10674
msgid "The object is used by another application."
msgstr "The object is used by another application."

#: app_Main.py:10688
msgid "Failed to verify project file"
msgstr "Failed to verify project file"

#: app_Main.py:10688 app_Main.py:10696 app_Main.py:10706
msgid "Retry to save it."
msgstr "Retry to save it."

#: app_Main.py:10696 app_Main.py:10706
msgid "Failed to parse saved project file"
msgstr "Failed to parse saved project file"

#: app_Main.py:10742
msgid "Save cancelled because source file is empty. Try to export the file."
msgstr "Save cancelled because source file is empty. Try to export the file."

#: assets/linux/flatcam-beta.desktop:3
msgid "FlatCAM Beta"
msgstr "FlatCAM Beta"

#: assets/linux/flatcam-beta.desktop:8
msgid "G-Code from GERBERS"
msgstr "G-Code from GERBERS"

#: camlib.py:707
msgid "self.solid_geometry is neither BaseGeometry or list."
msgstr "self.solid_geometry is neither BaseGeometry or list."

#: camlib.py:1100
msgid "Pass"
msgstr "Pass"

#: camlib.py:1122
msgid "Get Exteriors"
msgstr "Get Exteriors"

#: camlib.py:1125
msgid "Get Interiors"
msgstr "Get Interiors"

#: camlib.py:2403
msgid "Failed to mirror. No object selected"
msgstr "Failed to mirror. No object selected"

#: camlib.py:2468
msgid "Object was rotated"
msgstr "Object was rotated"

#: camlib.py:2470
msgid "Failed to rotate. No object selected"
msgstr "Failed to rotate. No object selected"

#: camlib.py:2536
msgid "Object was skewed"
msgstr "Object was skewed"

#: camlib.py:2538
msgid "Failed to skew. No object selected"
msgstr "Failed to skew. No object selected"

#: camlib.py:2614
msgid "Object was buffered"
msgstr "Object was buffered"

#: camlib.py:2616
msgid "Failed to buffer. No object selected"
msgstr "Failed to buffer. No object selected"

#: camlib.py:2865
msgid "There is no such parameter"
msgstr "There is no such parameter"

#: camlib.py:3072 camlib.py:5401 camlib.py:5801
msgid "Indexing geometry before generating G-Code..."
msgstr "Indexing geometry before generating G-Code..."

#: camlib.py:3102 camlib.py:4124 camlib.py:4360
msgid ""
"The Cut Z parameter has positive value. It is the depth value to drill into "
"material.\n"
"The Cut Z parameter needs to have a negative value, assuming it is a typo "
"therefore the app will convert the value to negative. Check the resulting "
"CNC code (Gcode etc)."
msgstr ""
"The Cut Z parameter has positive value. It is the depth value to drill into "
"material.\n"
"The Cut Z parameter needs to have a negative value, assuming it is a typo "
"therefore the app will convert the value to negative. Check the resulting "
"CNC code (Gcode etc)."

#: camlib.py:3109
msgid "The Cut Z parameter is zero. There will be no cut, aborting"
msgstr "The Cut Z parameter is zero. There will be no cut, aborting"

#: camlib.py:3238 camlib.py:3623
msgid "The End X,Y format has to be (x, y)."
msgstr "The End X,Y format has to be (x, y)."

#: camlib.py:3314 camlib.py:3714 camlib.py:4208 camlib.py:4441 camlib.py:5475
#: camlib.py:5882
msgid "Starting G-Code for tool with diameter"
msgstr "Starting G-Code for tool with diameter"

#: camlib.py:3438 camlib.py:4329 camlib.py:4562 camlib.py:6823
msgid "G91 coordinates not implemented"
msgstr "G91 coordinates not implemented"

#: camlib.py:3447
msgid "Finished G-Code generation for tool:"
msgstr "Finished G-Code generation for tool:"

#: camlib.py:3543 camlib.py:5347 camlib.py:5742
msgid ""
"Cut_Z parameter is None or zero. Most likely a bad combinations of other "
"parameters."
msgstr ""
"Cut_Z parameter is None or zero. Most likely a bad combinations of other "
"parameters."

#: camlib.py:3551 camlib.py:5356 camlib.py:5751
msgid ""
"The Cut Z parameter has positive value. It is the depth value to cut into "
"material.\n"
"The Cut Z parameter needs to have a negative value, assuming it is a typo "
"therefore the app will convert the value to negative.Check the resulting CNC "
"code (Gcode etc)."
msgstr ""
"The Cut Z parameter has positive value. It is the depth value to cut into "
"material.\n"
"The Cut Z parameter needs to have a negative value, assuming it is a typo "
"therefore the app will convert the value to negative.Check the resulting CNC "
"code (Gcode etc)."

#: camlib.py:3559 camlib.py:4134 camlib.py:4370 camlib.py:5364 camlib.py:5759
msgid "The Cut Z parameter is zero. There will be no cut, skipping file"
msgstr "The Cut Z parameter is zero. There will be no cut, skipping file"

#: camlib.py:3564 camlib.py:5369 camlib.py:5765
msgid "Travel Z parameter is None or zero."
msgstr "Travel Z parameter is None or zero."

#: camlib.py:3569 camlib.py:5374 camlib.py:5770
msgid ""
"The Travel Z parameter has negative value. It is the height value to travel "
"between cuts.\n"
"The Z Travel parameter needs to have a positive value, assuming it is a typo "
"therefore the app will convert the value to positive.Check the resulting CNC "
"code (Gcode etc)."
msgstr ""
"The Travel Z parameter has negative value. It is the height value to travel "
"between cuts.\n"
"The Z Travel parameter needs to have a positive value, assuming it is a typo "
"therefore the app will convert the value to positive.Check the resulting CNC "
"code (Gcode etc)."

#: camlib.py:3577 camlib.py:5382 camlib.py:5778
msgid "The Z Travel parameter is zero. This is dangerous, skipping file"
msgstr "The Z Travel parameter is zero. This is dangerous, skipping file"

#: camlib.py:3821 camlib.py:5548 camlib.py:5958
msgid "Finished G-Code generation"
msgstr "Finished G-Code generation"

#: camlib.py:3821 camlib.py:5548
msgid "paths traced"
msgstr "paths traced"

#: camlib.py:3878
msgid ""
"The Toolchange X,Y field in Edit -> Preferences has to be in the format (x, "
"y) \n"
"but now there is only one value, not two. "
msgstr ""
"The Toolchange X,Y field in Edit -> Preferences has to be in the format (x, "
"y) \n"
"but now there is only one value, not two. "

#: camlib.py:3890 camlib.py:5310 camlib.py:5709
msgid ""
"The End Move X,Y field in Edit -> Preferences has to be in the format (x, y) "
"but now there is only one value, not two."
msgstr ""
"The End Move X,Y field in Edit -> Preferences has to be in the format (x, y) "
"but now there is only one value, not two."

#: camlib.py:5216
msgid "Finished G-Code generation..."
msgstr "Finished G-Code generation..."

#: camlib.py:5333
msgid ""
"The Toolchange X,Y field in Edit -> Preferences has to be in the format (x, "
"y) \n"
"but now there is only one value, not two."
msgstr ""
"The Toolchange X,Y field in Edit -> Preferences has to be in the format (x, "
"y) \n"
"but now there is only one value, not two."

#: camlib.py:5600
msgid ""
"Trying to generate a CNC Job from a Geometry object without solid_geometry."
msgstr ""
"Trying to generate a CNC Job from a Geometry object without solid_geometry."

#: camlib.py:5642
msgid ""
"The Tool Offset value is too negative to use for the current_geometry.\n"
"Raise the value (in module) and try again."
msgstr ""
"The Tool Offset value is too negative to use for the current_geometry.\n"
"Raise the value (in module) and try again."

#: camlib.py:5958
msgid " paths traced."
msgstr " paths traced."

#: camlib.py:5986
msgid "There is no tool data in the SolderPaste geometry."
msgstr "There is no tool data in the SolderPaste geometry."

#: camlib.py:6076
msgid "Finished SolderPaste G-Code generation"
msgstr "Finished SolderPaste G-Code generation"

#: camlib.py:6076
msgid "paths traced."
msgstr "paths traced."

#: camlib.py:6400
msgid "Parsing GCode file. Number of lines"
msgstr "Parsing GCode file. Number of lines"

#: camlib.py:6512
msgid "Creating Geometry from the parsed GCode file. "
msgstr "Creating Geometry from the parsed GCode file. "

#: camlib.py:6569
msgid "Parsing GCode file for tool diameter"
msgstr "Parsing GCode file for tool diameter"

#: camlib.py:6570
msgid "Number of lines"
msgstr "Number of lines"

#: camlib.py:6659
msgid "Creating Geometry from the parsed GCode file for tool diameter"
msgstr "Creating Geometry from the parsed GCode file for tool diameter"

#: camlib.py:7093 camlib.py:7241 camlib.py:7410
msgid "G91 coordinates not implemented ..."
msgstr "G91 coordinates not implemented ..."

#: defaults.py:870
msgid "Could not load defaults file."
msgstr "Could not load defaults file."

#: defaults.py:883
msgid "Failed to parse defaults file."
msgstr "Failed to parse defaults file."

#: tclCommands/TclCommandBbox.py:75 tclCommands/TclCommandNregions.py:74
msgid "Expected GerberObject or GeometryObject, got"
msgstr "Expected GerberObject or GeometryObject, got"

#: tclCommands/TclCommandBounds.py:67 tclCommands/TclCommandBounds.py:71
msgid "Expected a list of objects names separated by comma. Got"
msgstr "Expected a list of objects names separated by comma. Got"

#: tclCommands/TclCommandBounds.py:81
msgid "TclCommand Bounds done."
msgstr "TclCommand Bounds done."

#: tclCommands/TclCommandCopperClear.py:281 tclCommands/TclCommandPaint.py:285
#: tclCommands/TclCommandScale.py:81
msgid "Could not retrieve box object"
msgstr "Could not retrieve box object"

#: tclCommands/TclCommandCopperClear.py:304
msgid "Expected either -box <value> or -all."
msgstr "Expected either -box <value> or -all."

#: tclCommands/TclCommandGeoCutout.py:147
msgid ""
"The name of the object for which cutout is done is missing. Add it and retry."
msgstr ""
"The name of the object for which cutout is done is missing. Add it and retry."

#: tclCommands/TclCommandGeoCutout.py:189
msgid "Gaps value can be only one of: 'lr', 'tb', '2lr', '2tb', 4 or 8."
msgstr "Gaps value can be only one of: 'lr', 'tb', '2lr', '2tb', 4 or 8."

#: tclCommands/TclCommandGeoCutout.py:301
#: tclCommands/TclCommandGeoCutout.py:356
msgid "Any-form Cutout operation finished."
msgstr "Any-form Cutout operation finished."

#: tclCommands/TclCommandGeoCutout.py:362
msgid "Cancelled. Object type is not supported."
msgstr "Cancelled. Object type is not supported."

#: tclCommands/TclCommandHelp.py:75
msgid "Available commands:"
msgstr "Available commands:"

#: tclCommands/TclCommandHelp.py:115
msgid "Type help <command_name> for usage."
msgstr "Type help <command_name> for usage."

#: tclCommands/TclCommandHelp.py:115
msgid "Example: help open_gerber"
msgstr "Example: help open_gerber"

#: tclCommands/TclCommandPaint.py:250 tclCommands/TclCommandPaint.py:256
msgid "Expected a tuple value like -single 3.2,0.1."
msgstr "Expected a tuple value like -single 3.2,0.1."

#: tclCommands/TclCommandPaint.py:278
msgid "Expected -box <value>."
msgstr "Expected -box <value>."

#: tclCommands/TclCommandPaint.py:299
msgid ""
"None of the following args: 'box', 'single', 'all' were used.\n"
"Paint failed."
msgstr ""
"None of the following args: 'box', 'single', 'all' were used.\n"
"Paint failed."

#: tclCommands/TclCommandScale.py:106
msgid ""
"Expected -origin <origin> or -origin <min_bounds> or -origin <center> or - "
"origin 3.0,4.2."
msgstr ""
"Expected -origin <origin> or -origin <min_bounds> or -origin <center> or - "
"origin 3.0,4.2."

#: tclCommands/TclCommandScale.py:118
msgid "Expected -x <value> -y <value>."
msgstr "Expected -x <value> -y <value>."

#: tclCommands/TclCommandSetOrigin.py:95
msgid "Expected a pair of (x, y) coordinates. Got"
msgstr "Expected a pair of (x, y) coordinates. Got"

#: tclCommands/TclCommandSetOrigin.py:101
msgid "Origin set by offsetting all loaded objects with "
msgstr "Origin set by offsetting all loaded objects with "

#: tclCommands/TclCommandSubtractRectangle.py:62
msgid "No Geometry name in args. Provide a name and try again."
msgstr "No Geometry name in args. Provide a name and try again."

#~| msgid "Opening G-Code."
#~ msgid "Opening G-..."
#~ msgstr "Opening G-..."

#~ msgid "Iso"
#~ msgstr "Iso"

#~ msgid "Rough"
#~ msgstr "Rough"

#~ msgid "Finish"
#~ msgstr "Finish"

#~ msgid "Loading Gerber into Editor"
#~ msgstr "Loading Gerber into Editor"

#~ msgid "Creating Gerber."
#~ msgstr "Creating Gerber."

#~ msgid "Plotting..."
#~ msgstr "Plotting..."

#~ msgid "Plotting Apertures"
#~ msgstr "Plotting Apertures"

#~ msgid "Importing Image"
#~ msgstr "Importing Image"

#~ msgid "Parsing PDF file ..."
#~ msgstr "Parsing PDF file ..."

#~ msgid "Importing Excellon."
#~ msgstr "Importing Excellon."

#~ msgid "Generating QRCode geometry"
#~ msgstr "Generating QRCode geometry"

#~ msgid "Creating Solder Paste dispensing geometry."
#~ msgstr "Creating Solder Paste dispensing geometry."

#~ msgid "Generating new object ..."
#~ msgstr "Generating new object ..."

#~ msgid "Printing PDF ... Please wait."
#~ msgstr "Printing PDF ... Please wait."

#~ msgid "Exporting Excellon"
#~ msgstr "Exporting Excellon"

#~ msgid "Exporting Gerber"
#~ msgstr "Exporting Gerber"

#~ msgid "Exporting DXF"
#~ msgstr "Exporting DXF"

#~ msgid "Importing DXF"
#~ msgstr "Importing DXF"

#~ msgid "Opening Gerber"
#~ msgstr "Opening Gerber"

#~ msgid "Opening Excellon."
#~ msgstr "Opening Excellon."

#~ msgid "Opening HPGL2"
#~ msgstr "Opening HPGL2"

#~ msgid "Opening TCL Script..."
#~ msgstr "Opening TCL Script..."

#~ msgid "Saving FlatCAM Project"
#~ msgstr "Saving FlatCAM Project"

#~ msgid "To add an Pad Array first select a aperture in Aperture Table"
#~ msgstr "To add an Pad Array first select a aperture in Aperture Table"

#~ msgid "Close Editor"
#~ msgstr "Close Editor"

#~ msgid "Corners Tool exit."
#~ msgstr "Corners Tool exit."

#~ msgid "Done. Drill added."
#~ msgstr "Done. Drill added."

#~ msgid "Done. Drill Array added."
#~ msgstr "Done. Drill Array added."

#~ msgid "Done. Adding Slot completed."
#~ msgstr "Done. Adding Slot completed."

#~ msgid "Done. Slot Array added."
#~ msgstr "Done. Slot Array added."

#~ msgid "Done. Drill/Slot Resize completed."
#~ msgstr "Done. Drill/Slot Resize completed."

#~ msgid "Cancelled. No drills/slots selected for resize ..."
#~ msgstr "Cancelled. No drills/slots selected for resize ..."

#~ msgid "Done. Drill(s) Move completed."
#~ msgstr "Done. Drill(s) Move completed."

#~ msgid "Done. Drill(s) copied."
#~ msgstr "Done. Drill(s) copied."

#~ msgid "If checked will delete the source objects."
#~ msgstr "If checked will delete the source objects."

#~ msgid ""
#~ "G-code does not have a G94 code.\n"
#~ "Append Code snippet will not be used.."
#~ msgstr ""
#~ "G-code does not have a G94 code.\n"
#~ "Append Code snippet will not be used.."

#~ msgid ""
#~ "Copy a selection of tools in the Tool Table\n"
#~ "by first selecting a row in the Tool Table."
#~ msgstr ""
#~ "Copy a selection of tools in the Tool Table\n"
#~ "by first selecting a row in the Tool Table."

#~ msgid "Add from Tool DB"
#~ msgstr "Add from Tool DB"

#~ msgid ">Excellon Editor<"
#~ msgstr ">Excellon Editor<"

#~ msgid ">Gerber Editor<"
#~ msgstr ">Gerber Editor<"

#~ msgid "New Project ...\tCtrl+N"
#~ msgstr "New Project ...\tCtrl+N"

#~ msgid "Geometry\tN"
#~ msgstr "Geometry\tN"

#~ msgid "Gerber\tB"
#~ msgstr "Gerber\tB"

#~ msgid "Excellon\tL"
#~ msgstr "Excellon\tL"

#~ msgid "Open Gerber ...\tCtrl+G"
#~ msgstr "Open Gerber ...\tCtrl+G"

#~ msgid "Open Excellon ...\tCtrl+E"
#~ msgstr "Open Excellon ...\tCtrl+E"

#~ msgid "Open G-Code ..."
#~ msgstr "Open G-Code ..."

#~ msgid "Save Project ...\tCtrl+S"
#~ msgstr "Save Project ...\tCtrl+S"

#~ msgid "Save Project As ...\tCtrl+Shift+S"
#~ msgstr "Save Project As ...\tCtrl+Shift+S"

#~ msgid "Export SVG ..."
#~ msgstr "Export SVG ..."

#~ msgid "Export DXF ..."
#~ msgstr "Export DXF ..."

#~ msgid "Export PNG ..."
#~ msgstr "Export PNG ..."

#~ msgid "Export Excellon ..."
#~ msgstr "Export Excellon ..."

#~ msgid "Export Gerber ..."
#~ msgstr "Export Gerber ..."

#~ msgid "Close Editor\tCtrl+S"
#~ msgstr "Close Editor\tCtrl+S"

#~ msgid "Delete\tDEL"
#~ msgstr "Delete\tDEL"

#~ msgid "Set Origin\tO"
#~ msgstr "Set Origin\tO"

#~ msgid "Move to Origin\tShift+O"
#~ msgstr "Move to Origin\tShift+O"

#~ msgid "Jump to Location\tJ"
#~ msgstr "Jump to Location\tJ"

#~ msgid "Locate in Object\tShift+J"
#~ msgstr "Locate in Object\tShift+J"

#~ msgid "Toggle Units\tQ"
#~ msgstr "Toggle Units\tQ"

#~ msgid "Select All\tCtrl+A"
#~ msgstr "Select All\tCtrl+A"

#~ msgid "Preferences\tShift+P"
#~ msgstr "Preferences\tShift+P"

#~ msgid "Skew on X axis\tShift+X"
#~ msgstr "Skew on X axis\tShift+X"

#~ msgid "Skew on Y axis\tShift+Y"
#~ msgstr "Skew on Y axis\tShift+Y"

#~ msgid "View source\tAlt+S"
#~ msgstr "View source\tAlt+S"

#~ msgid "Tools DataBase\tCtrl+D"
#~ msgstr "Tools DataBase\tCtrl+D"

#~ msgid "Enable all plots\tAlt+1"
#~ msgstr "Enable all plots\tAlt+1"

#~ msgid "Disable all plots\tAlt+2"
#~ msgstr "Disable all plots\tAlt+2"

#~ msgid "Zoom Fit\tV"
#~ msgstr "Zoom Fit\tV"

#~ msgid "Zoom In\t="
#~ msgstr "Zoom In\t="

#~ msgid "Zoom Out\t-"
#~ msgstr "Zoom Out\t-"

#~ msgid "Toggle Code Editor\tShift+E"
#~ msgstr "Toggle Code Editor\tShift+E"

#~ msgid "Toggle FullScreen\tAlt+F10"
#~ msgstr "Toggle FullScreen\tAlt+F10"

#~ msgid "Toggle Plot Area\tCtrl+F10"
#~ msgstr "Toggle Plot Area\tCtrl+F10"

#~| msgid "Toggle Grid Lines\tAlt+G"
#~ msgid "Toggle Grid Lines\tShift+G"
#~ msgstr "Toggle Grid Lines\tShift+G"

#~| msgid "Toggle Axis\tShift+G"
#~ msgid "Toggle Axis\tShift+A"
#~ msgstr "Toggle Axis\tShift+A"

#~ msgid "Toggle Workspace\tShift+W"
#~ msgstr "Toggle Workspace\tShift+W"

#~| msgid "Toggle HUD\tAlt+H"
#~ msgid "Toggle HUD\tShift+H"
#~ msgstr "Toggle HUD\tShift+H"

#~ msgid "Command Line\tS"
#~ msgstr "Command Line\tS"

#~ msgid "Shortcuts List\tF3"
#~ msgstr "Shortcuts List\tF3"

#~ msgid "About FlatCAM"
#~ msgstr "About FlatCAM"

#~ msgid "Add Circle\tO"
#~ msgstr "Add Circle\tO"

#~ msgid "Add Arc\tA"
#~ msgstr "Add Arc\tA"

#~ msgid "Add Rectangle\tR"
#~ msgstr "Add Rectangle\tR"

#~ msgid "Add Polygon\tN"
#~ msgstr "Add Polygon\tN"

#~ msgid "Add Path\tP"
#~ msgstr "Add Path\tP"

#~ msgid "Add Text\tT"
#~ msgstr "Add Text\tT"

#~ msgid "Polygon Union\tU"
#~ msgstr "Polygon Union\tU"

#~ msgid "Polygon Intersection\tE"
#~ msgstr "Polygon Intersection\tE"

#~ msgid "Polygon Subtraction\tS"
#~ msgstr "Polygon Subtraction\tS"

#~ msgid "Cut Path\tX"
#~ msgstr "Cut Path\tX"

#~ msgid "Delete Shape\tDEL"
#~ msgstr "Delete Shape\tDEL"

#~ msgid "Move\tM"
#~ msgstr "Move\tM"

#~ msgid "Buffer Tool\tB"
#~ msgstr "Buffer Tool\tB"

#~ msgid "Paint Tool\tI"
#~ msgstr "Paint Tool\tI"

#~ msgid "Transform Tool\tAlt+R"
#~ msgstr "Transform Tool\tAlt+R"

#~ msgid "Toggle Corner Snap\tK"
#~ msgstr "Toggle Corner Snap\tK"

#~ msgid "Add Drill Array\tA"
#~ msgstr "Add Drill Array\tA"

#~ msgid "Add Drill\tD"
#~ msgstr "Add Drill\tD"

#~ msgid "Add Slot Array\tQ"
#~ msgstr "Add Slot Array\tQ"

#~ msgid "Add Slot\tW"
#~ msgstr "Add Slot\tW"

#~ msgid "Copy\tC"
#~ msgstr "Copy\tC"

#~ msgid "Move Drill(s)\tM"
#~ msgstr "Move Drill(s)\tM"

#~ msgid "Add Pad\tP"
#~ msgstr "Add Pad\tP"

#~ msgid "Add Pad Array\tA"
#~ msgstr "Add Pad Array\tA"

#~ msgid "Add Track\tT"
#~ msgstr "Add Track\tT"

#~ msgid "Add Region\tN"
#~ msgstr "Add Region\tN"

#~ msgid "Poligonize\tAlt+N"
#~ msgstr "Poligonize\tAlt+N"

#~ msgid "Add SemiDisc\tE"
#~ msgstr "Add SemiDisc\tE"

#~ msgid "Add Disc\tD"
#~ msgstr "Add Disc\tD"

#~ msgid "Buffer\tB"
#~ msgstr "Buffer\tB"

#~ msgid "Scale\tS"
#~ msgstr "Scale\tS"

#~ msgid "Mark Area\tAlt+A"
#~ msgstr "Mark Area\tAlt+A"

#~ msgid "Transform\tAlt+R"
#~ msgstr "Transform\tAlt+R"

#~ msgid "Enable all Plots"
#~ msgstr "Enable all Plots"

#~ msgid "<b>Parameters:</b>"
#~ msgstr "<b>Parameters:</b>"

#~ msgid "Important Information's"
#~ msgstr "Important Information's"

#~ msgid ""
#~ "Tool tolerance. If there is a tool in the targeted tools table with\n"
#~ "the value within the limits then this tool from DB will be used."
#~ msgstr ""
#~ "Tool tolerance. If there is a tool in the targeted tools table with\n"
#~ "the value within the limits then this tool from DB will be used."

#~ msgid "Generate CNCJob object."
#~ msgstr "Generate CNCJob object."

#~ msgid "Select a Gerber, Geometry, Excellon or CNCJobObject to update."
#~ msgstr "Select a Gerber, Geometry, Excellon or CNCJobObject to update."

#~ msgid "Print Preview"
#~ msgstr "Print Preview"

#~ msgid "Print Code"
#~ msgstr "Print Code"

#~ msgid "Find in Code"
#~ msgstr "Find in Code"

#~ msgid "Copy All"
#~ msgstr "Copy All"

#~ msgid "Will copy all the text in the Code Editor to the clipboard."
#~ msgstr "Will copy all the text in the Code Editor to the clipboard."

#~ msgid "Open Code"
#~ msgstr "Open Code"

#~ msgid "Save Code"
#~ msgstr "Save Code"

#~ msgid "Run Code"
#~ msgstr "Run Code"

#~ msgid "Content copied to clipboard ..."
#~ msgstr "Content copied to clipboard ..."

#~ msgid "Add Geometry Tool in DB"
#~ msgstr "Add Geometry Tool in DB"

#~ msgid ""
#~ "Add a new tool in the Tools Table of the\n"
#~ "active Geometry object after selecting a tool\n"
#~ "in the Tools Database."
#~ msgstr ""
#~ "Add a new tool in the Tools Table of the\n"
#~ "active Geometry object after selecting a tool\n"
#~ "in the Tools Database."

#~ msgid "Tool Shape"
#~ msgstr "Tool Shape"

#~ msgid "FR Z"
#~ msgstr "FR Z"

#~ msgid "Toolchange"
#~ msgstr "Toolchange"

#~ msgid "Toolchange XY"
#~ msgstr "Toolchange XY"

#~ msgid "End Z"
#~ msgstr "End Z"

#~ msgid "Tool Index."
#~ msgstr "Tool Index."

#~ msgid ""
#~ "FR. Feedrate\n"
#~ "The speed on XY plane used while cutting into material."
#~ msgstr ""
#~ "FR. Feedrate\n"
#~ "The speed on XY plane used while cutting into material."

#~ msgid ""
#~ "FR Z. Feedrate Z\n"
#~ "The speed on Z plane."
#~ msgstr ""
#~ "FR Z. Feedrate Z\n"
#~ "The speed on Z plane."

#~ msgid ""
#~ "Preprocessor.\n"
#~ "A selection of files that will alter the generated G-code\n"
#~ "to fit for a number of use cases."
#~ msgstr ""
#~ "Preprocessor.\n"
#~ "A selection of files that will alter the generated G-code\n"
#~ "to fit for a number of use cases."

#~ msgid ""
#~ "Toolchange.\n"
#~ "It will create a toolchange event.\n"
#~ "The kind of toolchange is determined by\n"
#~ "the preprocessor file."
#~ msgstr ""
#~ "Toolchange.\n"
#~ "It will create a toolchange event.\n"
#~ "The kind of toolchange is determined by\n"
#~ "the preprocessor file."

#~ msgid ""
#~ "Toolchange XY.\n"
#~ "A set of coordinates in the format (x, y).\n"
#~ "Will determine the cartesian position of the point\n"
#~ "where the tool change event take place."
#~ msgstr ""
#~ "Toolchange XY.\n"
#~ "A set of coordinates in the format (x, y).\n"
#~ "Will determine the cartesian position of the point\n"
#~ "where the tool change event take place."

#~ msgid ""
#~ "Toolchange Z.\n"
#~ "The position on Z plane where the tool change event take place."
#~ msgstr ""
#~ "Toolchange Z.\n"
#~ "The position on Z plane where the tool change event take place."

#~ msgid ""
#~ "Start Z.\n"
#~ "If it's left empty it will not be used.\n"
#~ "A position on Z plane to move immediately after job start."
#~ msgstr ""
#~ "Start Z.\n"
#~ "If it's left empty it will not be used.\n"
#~ "A position on Z plane to move immediately after job start."

#~ msgid ""
#~ "End Z.\n"
#~ "A position on Z plane to move immediately after job stop."
#~ msgstr ""
#~ "End Z.\n"
#~ "A position on Z plane to move immediately after job stop."

#~ msgid "&New"
#~ msgstr "&New"

#~ msgid "Open &Project ..."
#~ msgstr "Open &Project ..."

#~ msgid "E&xit"
#~ msgstr "E&xit"

#~ msgid "&Delete\tDEL"
#~ msgstr "&Delete\tDEL"

#~ msgid "&Delete"
#~ msgstr "&Delete"

#~ msgid "&Replot"
#~ msgstr "&Replot"

#~ msgid "&Command Line"
#~ msgstr "&Command Line"

#~ msgid "&Cutout Tool"
#~ msgstr "&Cutout Tool"

#~ msgid "Connect:"
#~ msgstr "Connect:"

#~ msgid "Contour:"
#~ msgstr "Contour:"

#~ msgid ""
#~ "Create the Geometry Object\n"
#~ "for milling DRILLS toolpaths."
#~ msgstr ""
#~ "Create the Geometry Object\n"
#~ "for milling DRILLS toolpaths."

#~ msgid ""
#~ "Area exclusion parameters.\n"
#~ "Those parameters are available only for\n"
#~ "Advanced App. Level."
#~ msgstr ""
#~ "Area exclusion parameters.\n"
#~ "Those parameters are available only for\n"
#~ "Advanced App. Level."

#, fuzzy
#~| msgid ""
#~| "Merge a selection of Excellon objects into a new combo Excellon object."
#~ msgid "Generate GCode out of slot holes in an Excellon object."
#~ msgstr ""
#~ "Merge a selection of Excellon objects into a new combo Excellon object."

#~ msgid "No selected tools in Tool Table."
#~ msgstr "No selected tools in Tool Table."

#, fuzzy
#~| msgid "Selected Tab - Choose an Item from Project Tab"
#~ msgid "Properties Tab - Choose an Item from Project Tab"
#~ msgstr "Selected Tab - Choose an Item from Project Tab"

#~ msgid "Details"
#~ msgstr "Details"

#~ msgid "The normal flow when working with the application is the following:"
#~ msgstr "The normal flow when working with the application is the following:"

#~ msgid ""
#~ "Load/Import a Gerber, Excellon, Gcode, DXF, Raster Image or SVG file into "
#~ "the application using either the toolbars, key shortcuts or even dragging "
#~ "and dropping the files on the GUI."
#~ msgstr ""
#~ "Load/Import a Gerber, Excellon, Gcode, DXF, Raster Image or SVG file into "
#~ "the application using either the toolbars, key shortcuts or even dragging "
#~ "and dropping the files on the GUI."

#~ msgid ""
#~ "You can also load a project by double clicking on the project file, drag "
#~ "and drop of the file into the GUI or through the menu (or toolbar) "
#~ "actions offered within the app."
#~ msgstr ""
#~ "You can also load a project by double clicking on the project file, drag "
#~ "and drop of the file into the GUI or through the menu (or toolbar) "
#~ "actions offered within the app."

#, fuzzy
#~| msgid ""
#~| "Once an object is available in the Project Tab, by selecting it and then "
#~| "focusing on SELECTED TAB (more simpler is to double click the object "
#~| "name in the Project Tab, SELECTED TAB will be updated with the object "
#~| "properties according to its kind: Gerber, Excellon, Geometry or CNCJob "
#~| "object."
#~ msgid ""
#~ "Once an object is available in the Project Tab, by selecting it and then "
#~ "focusing on Properties TAB (more simpler is to double click the object "
#~ "name in the Project Tab, Properties TAB will be updated with the object "
#~ "properties according to its kind: Gerber, Excellon, Geometry or CNCJob "
#~ "object."
#~ msgstr ""
#~ "Once an object is available in the Project Tab, by selecting it and then "
#~ "focusing on SELECTED TAB (more simpler is to double click the object name "
#~ "in the Project Tab, SELECTED TAB will be updated with the object "
#~ "properties according to its kind: Gerber, Excellon, Geometry or CNCJob "
#~ "object."

#, fuzzy
#~| msgid ""
#~| "If the selection of the object is done on the canvas by single click "
#~| "instead, and the SELECTED TAB is in focus, again the object properties "
#~| "will be displayed into the Selected Tab. Alternatively, double clicking "
#~| "on the object on the canvas will bring the SELECTED TAB and populate it "
#~| "even if it was out of focus."
#~ msgid ""
#~ "If the selection of the object is done on the canvas by single click "
#~ "instead, and the Properties TAB is in focus, again the object properties "
#~ "will be displayed into the Properties Tab. Alternatively, double clicking "
#~ "on the object on the canvas will bring the Properties TAB and populate it "
#~ "even if it was out of focus."
#~ msgstr ""
#~ "If the selection of the object is done on the canvas by single click "
#~ "instead, and the SELECTED TAB is in focus, again the object properties "
#~ "will be displayed into the Selected Tab. Alternatively, double clicking "
#~ "on the object on the canvas will bring the SELECTED TAB and populate it "
#~ "even if it was out of focus."

#~ msgid ""
#~ "You can change the parameters in this screen and the flow direction is "
#~ "like this:"
#~ msgstr ""
#~ "You can change the parameters in this screen and the flow direction is "
#~ "like this:"

#~ msgid ""
#~ "Gerber/Excellon Object --> Change Parameter --> Generate Geometry --> "
#~ "Geometry Object --> Add tools (change param in Selected Tab) --> Generate "
#~ "CNCJob --> CNCJob Object --> Verify GCode (through Edit CNC Code) and/or "
#~ "append/prepend to GCode (again, done in SELECTED TAB) --> Save GCode."
#~ msgstr ""
#~ "Gerber/Excellon Object --> Change Parameter --> Generate Geometry --> "
#~ "Geometry Object --> Add tools (change param in Selected Tab) --> Generate "
#~ "CNCJob --> CNCJob Object --> Verify GCode (through Edit CNC Code) and/or "
#~ "append/prepend to GCode (again, done in SELECTED TAB) --> Save GCode."

#~ msgid ""
#~ "A list of key shortcuts is available through an menu entry in Help --> "
#~ "Shortcuts List or through its own key shortcut: <b>F3</b>."
#~ msgstr ""
#~ "A list of key shortcuts is available through an menu entry in Help --> "
#~ "Shortcuts List or through its own key shortcut: <b>F3</b>."

#~ msgid "Selected"
#~ msgstr "Selected"

#~ msgid ""
#~ "Cutout operation cannot be done on a multi-geo Geometry.\n"
#~ "Optionally, this Multi-geo Geometry can be converted to Single-geo "
#~ "Geometry,\n"
#~ "and after that perform Cutout."
#~ msgstr ""
#~ "Cutout operation cannot be done on a multi-geo Geometry.\n"
#~ "Optionally, this Multi-geo Geometry can be converted to Single-geo "
#~ "Geometry,\n"
#~ "and after that perform Cutout."

#~ msgid "Generating Film ... Please wait."
#~ msgstr "Generating Film ... Please wait."

#, fuzzy
#~| msgid "Minimal"
#~ msgid "Find Optimal"
#~ msgstr "Minimal"

#~ msgid "Basic Geo Parameters"
#~ msgstr "Basic Geo Parameters"

#~ msgid "Advanced Geo Parameters"
#~ msgstr "Advanced Geo Parameters"

#~ msgid "ReadMe?"
#~ msgstr "ReadMe?"

#~ msgid ""
#~ "Toggle the display of the Gerber Apertures Table.\n"
#~ "When unchecked, it will delete all mark shapes\n"
#~ "that are drawn on canvas."
#~ msgstr ""
#~ "Toggle the display of the Gerber Apertures Table.\n"
#~ "When unchecked, it will delete all mark shapes\n"
#~ "that are drawn on canvas."

#~ msgid ""
#~ "Generate the CNC Job.\n"
#~ "If milling then an additional Geometry object will be created"
#~ msgstr ""
#~ "Generate the CNC Job.\n"
#~ "If milling then an additional Geometry object will be created"

#~ msgid "Travelled dist."
#~ msgstr "Travelled dist."

#~ msgid "Prepend to CNC Code"
#~ msgstr "Prepend to CNC Code"

#~ msgid "Append to CNC Code"
#~ msgstr "Append to CNC Code"

#~ msgid "Toolchange G-Code"
#~ msgstr "Toolchange G-Code"

#~ msgid ""
#~ "Type here any G-Code commands you would\n"
#~ "like to be executed when Toolchange event is encountered.\n"
#~ "This will constitute a Custom Toolchange GCode,\n"
#~ "or a Toolchange Macro.\n"
#~ "The FlatCAM variables are surrounded by '%' symbol.\n"
#~ "\n"
#~ "WARNING: it can be used only with a preprocessor file\n"
#~ "that has 'toolchange_custom' in it's name and this is built\n"
#~ "having as template the 'Toolchange Custom' posprocessor file."
#~ msgstr ""
#~ "Type here any G-Code commands you would\n"
#~ "like to be executed when Toolchange event is encountered.\n"
#~ "This will constitute a Custom Toolchange GCode,\n"
#~ "or a Toolchange Macro.\n"
#~ "The FlatCAM variables are surrounded by '%' symbol.\n"
#~ "\n"
#~ "WARNING: it can be used only with a preprocessor file\n"
#~ "that has 'toolchange_custom' in it's name and this is built\n"
#~ "having as template the 'Toolchange Custom' posprocessor file."

#~ msgid ""
#~ "Type here any G-Code commands you would\n"
#~ "like to be executed when Toolchange event is encountered.\n"
#~ "This will constitute a Custom Toolchange GCode,\n"
#~ "or a Toolchange Macro.\n"
#~ "The FlatCAM variables are surrounded by '%' symbol.\n"
#~ "WARNING: it can be used only with a preprocessor file\n"
#~ "that has 'toolchange_custom' in it's name."
#~ msgstr ""
#~ "Type here any G-Code commands you would\n"
#~ "like to be executed when Toolchange event is encountered.\n"
#~ "This will constitute a Custom Toolchange GCode,\n"
#~ "or a Toolchange Macro.\n"
#~ "The FlatCAM variables are surrounded by '%' symbol.\n"
#~ "WARNING: it can be used only with a preprocessor file\n"
#~ "that has 'toolchange_custom' in it's name."

#~ msgid "Use Toolchange Macro"
#~ msgstr "Use Toolchange Macro"

#~ msgid ""
#~ "Check this box if you want to use\n"
#~ "a Custom Toolchange GCode (macro)."
#~ msgstr ""
#~ "Check this box if you want to use\n"
#~ "a Custom Toolchange GCode (macro)."

#~ msgid ""
#~ "A list of the FlatCAM variables that can be used\n"
#~ "in the Toolchange event.\n"
#~ "They have to be surrounded by the '%' symbol"
#~ msgstr ""
#~ "A list of the FlatCAM variables that can be used\n"
#~ "in the Toolchange event.\n"
#~ "They have to be surrounded by the '%' symbol"

#~ msgid "FlatCAM CNC parameters"
#~ msgstr "FlatCAM CNC parameters"

#~ msgid "tool number"
#~ msgstr "tool number"

#~ msgid "tool diameter"
#~ msgstr "tool diameter"

#~ msgid "for Excellon, total number of drills"
#~ msgstr "for Excellon, total number of drills"

#~ msgid "X coord for Toolchange"
#~ msgstr "X coord for Toolchange"

#~ msgid "Y coord for Toolchange"
#~ msgstr "Y coord for Toolchange"

#~ msgid "Z coord for Toolchange"
#~ msgstr "Z coord for Toolchange"

#~ msgid "depth where to cut"
#~ msgstr "depth where to cut"

#~ msgid "height where to travel"
#~ msgstr "height where to travel"

#~ msgid "the step value for multidepth cut"
#~ msgstr "the step value for multidepth cut"

#~ msgid "the value for the spindle speed"
#~ msgstr "the value for the spindle speed"

#~ msgid "time to dwell to allow the spindle to reach it's set RPM"
#~ msgstr "time to dwell to allow the spindle to reach it's set RPM"

#~ msgid ""
#~ "Opens TAB to view/modify/print G-Code\n"
#~ "file."
#~ msgstr ""
#~ "Opens TAB to view/modify/print G-Code\n"
#~ "file."

#~ msgid ""
#~ "Type here any G-Code commands you would like to be executed when "
#~ "Toolchange event is encountered.\n"
#~ "This will constitute a Custom Toolchange GCode, or a Toolchange Macro.\n"
#~ "The FlatCAM variables are surrounded by '%' symbol.\n"
#~ "WARNING: it can be used only with a preprocessor file that has "
#~ "'toolchange_custom' in it's name."
#~ msgstr ""
#~ "Type here any G-Code commands you would like to be executed when "
#~ "Toolchange event is encountered.\n"
#~ "This will constitute a Custom Toolchange GCode, or a Toolchange Macro.\n"
#~ "The FlatCAM variables are surrounded by '%' symbol.\n"
#~ "WARNING: it can be used only with a preprocessor file that has "
#~ "'toolchange_custom' in it's name."

#~ msgid "Z depth for the cut"
#~ msgstr "Z depth for the cut"

#~ msgid "Z height for travel"
#~ msgstr "Z height for travel"

#~ msgid "dwelltime = time to dwell to allow the spindle to reach it's set RPM"
#~ msgstr ""
#~ "dwelltime = time to dwell to allow the spindle to reach it's set RPM"

#~ msgid "Excellon Optimization"
#~ msgstr "Excellon Optimization"

#~ msgid "Gcode"
#~ msgstr "Gcode"

#~ msgid ""
#~ "Choose what to use for GCode generation:\n"
#~ "'Drills', 'Slots' or 'Both'.\n"
#~ "When choosing 'Slots' or 'Both', slots will be\n"
#~ "converted to drills."
#~ msgstr ""
#~ "Choose what to use for GCode generation:\n"
#~ "'Drills', 'Slots' or 'Both'.\n"
#~ "When choosing 'Slots' or 'Both', slots will be\n"
#~ "converted to drills."

#~ msgid "Display Hover Shape"
#~ msgstr "Display Hover Shape"

#~ msgid "A list of Geometry Editor parameters."
#~ msgstr "A list of Geometry Editor parameters."

#~ msgid ""
#~ "Toggle the display of the Gerber Apertures Table.\n"
#~ "Also, on hide, it will delete all mark shapes\n"
#~ "that are drawn on canvas."
#~ msgstr ""
#~ "Toggle the display of the Gerber Apertures Table.\n"
#~ "Also, on hide, it will delete all mark shapes\n"
#~ "that are drawn on canvas."

#~ msgid ""
#~ "The axis should pass through a <b>point</b> or cut\n"
#~ " a specified <b>box</b> (in a FlatCAM object) through \n"
#~ "the center."
#~ msgstr ""
#~ "The axis should pass through a <b>point</b> or cut\n"
#~ " a specified <b>box</b> (in a FlatCAM object) through \n"
#~ "the center."

#~ msgid ""
#~ "G-code does not have a G94 code and we will not include the code in the "
#~ "'Prepend to GCode' text box"
#~ msgstr ""
#~ "G-code does not have a G94 code and we will not include the code in the "
#~ "'Prepend to GCode' text box"

#~ msgid "Cancelled. The Toolchange Custom code is enabled but it's empty."
#~ msgstr "Cancelled. The Toolchange Custom code is enabled but it's empty."

#~ msgid "Toolchange G-code was replaced by a custom code."
#~ msgstr "Toolchange G-code was replaced by a custom code."

#~ msgid ""
#~ "The used preprocessor file has to have in it's name: 'toolchange_custom'"
#~ msgstr ""
#~ "The used preprocessor file has to have in it's name: 'toolchange_custom'"

#~ msgid "There is no preprocessor file."
#~ msgstr "There is no preprocessor file."

#~ msgid ""
#~ "Excellon.create_geometry() -> a drill location was skipped due of not "
#~ "having a tool associated.\n"
#~ "Check the resulting GCode."
#~ msgstr ""
#~ "Excellon.create_geometry() -> a drill location was skipped due of not "
#~ "having a tool associated.\n"
#~ "Check the resulting GCode."

#~ msgid "A. Automatic Bridge Gaps"
#~ msgstr "A. Automatic Bridge Gaps"

#~ msgid "Generate Freeform Geometry"
#~ msgstr "Generate Freeform Geometry"

#~ msgid "Generate Rectangular Geometry"
#~ msgstr "Generate Rectangular Geometry"

#~ msgid "Added manual Bridge Gap."
#~ msgstr "Added manual Bridge Gap."

#~ msgid "Gerber to be mirrored"
#~ msgstr "Gerber to be mirrored"

#~ msgid "Excellon Object to be mirrored."
#~ msgstr "Excellon Object to be mirrored."

#~ msgid "Geometry Obj to be mirrored."
#~ msgstr "Geometry Obj to be mirrored."

#~ msgid "Mirror Parameters"
#~ msgstr "Mirror Parameters"

#~ msgid "Mirror Axis"
#~ msgstr "Mirror Axis"

#~ msgid "was mirrored"
#~ msgstr "was mirrored"

#~ msgid "There is no Geometry object loaded ..."
#~ msgstr "There is no Geometry object loaded ..."

#~ msgid "Image to PCB"
#~ msgstr "Image to PCB"

#~ msgid "Generate Isolation Geometry"
#~ msgstr "Generate Isolation Geometry"

#~ msgid "Wrong Tool Dia value format entered, use a number."
#~ msgstr "Wrong Tool Dia value format entered, use a number."

#~ msgid ""
#~ "- 'Area Selection' - left mouse click to start selection of the area to "
#~ "be painted.\n"
#~ "Keeping a modifier key pressed (CTRL or SHIFT) will allow to add multiple "
#~ "areas.\n"
#~ "- 'All Polygons' - the Paint will start after click.\n"
#~ "- 'Reference Object' -  will do non copper clearing within the area\n"
#~ "specified by another object."
#~ msgstr ""
#~ "- 'Area Selection' - left mouse click to start selection of the area to "
#~ "be painted.\n"
#~ "Keeping a modifier key pressed (CTRL or SHIFT) will allow to add multiple "
#~ "areas.\n"
#~ "- 'All Polygons' - the Paint will start after click.\n"
#~ "- 'Reference Object' -  will do non copper clearing within the area\n"
#~ "specified by another object."

#~ msgid "Paint Single failed."
#~ msgstr "Paint Single failed."

#~ msgid "Paint Single Done."
#~ msgstr "Paint Single Done."

#~ msgid "Polygon Paint started ..."
#~ msgstr "Polygon Paint started ..."

#~ msgid "Painting polygons..."
#~ msgstr "Painting polygons..."

#~ msgid "Paint All Done."
#~ msgstr "Paint All Done."

#~ msgid "Paint All with Rest-Machining done."
#~ msgstr "Paint All with Rest-Machining done."

#~ msgid "Paint Poly All Done."
#~ msgstr "Paint Poly All Done."

#~ msgid "Paint Area Done."
#~ msgstr "Paint Area Done."

#~ msgid "Paint Area failed."
#~ msgstr "Paint Area failed."

#~ msgid "Paint Poly Area Done."
#~ msgstr "Paint Poly Area Done."

#~ msgid "Import 2-file Excellon"
#~ msgstr "Import 2-file Excellon"

#~ msgid "Data"
#~ msgstr "Data"

#~ msgid "If you like or use this program you can make a donation"
#~ msgstr "If you like or use this program you can make a donation"

#, python-format
#~ msgid ""
#~ "You don't have to make a donation %s, and it is totally optional but:"
#~ msgstr ""
#~ "You don't have to make a donation %s, and it is totally optional but:"

#~ msgid "it will be welcomed with joy"
#~ msgstr "it will be welcomed with joy"

#~ msgid "it will give me a reason to continue"
#~ msgstr "it will give me a reason to continue"

#~ msgid "Could not export Gerber file."
#~ msgstr "Could not export Gerber file."

#~ msgid "Expected a Geometry, got"
#~ msgstr "Expected a Geometry, got"

#~ msgid "Angle:"
#~ msgstr "Angle:"

#~ msgid ""
#~ "Rotate the selected shape(s).\n"
#~ "The point of reference is the middle of\n"
#~ "the bounding box for all selected shapes."
#~ msgstr ""
#~ "Rotate the selected shape(s).\n"
#~ "The point of reference is the middle of\n"
#~ "the bounding box for all selected shapes."

#~ msgid "Angle X:"
#~ msgstr "Angle X:"

#~ msgid ""
#~ "Skew/shear the selected shape(s).\n"
#~ "The point of reference is the middle of\n"
#~ "the bounding box for all selected shapes."
#~ msgstr ""
#~ "Skew/shear the selected shape(s).\n"
#~ "The point of reference is the middle of\n"
#~ "the bounding box for all selected shapes."

#~ msgid "Angle Y:"
#~ msgstr "Angle Y:"

#~ msgid "Factor X:"
#~ msgstr "Factor X:"

#~ msgid ""
#~ "Scale the selected shape(s).\n"
#~ "The point of reference depends on \n"
#~ "the Scale reference checkbox state."
#~ msgstr ""
#~ "Scale the selected shape(s).\n"
#~ "The point of reference depends on \n"
#~ "the Scale reference checkbox state."

#~ msgid "Factor Y:"
#~ msgstr "Factor Y:"

#~ msgid ""
#~ "Scale the selected shape(s)\n"
#~ "using the Scale Factor X for both axis."
#~ msgstr ""
#~ "Scale the selected shape(s)\n"
#~ "using the Scale Factor X for both axis."

#~ msgid "Scale Reference"
#~ msgstr "Scale Reference"

#~ msgid ""
#~ "Scale the selected shape(s)\n"
#~ "using the origin reference when checked,\n"
#~ "and the center of the biggest bounding box\n"
#~ "of the selected shapes when unchecked."
#~ msgstr ""
#~ "Scale the selected shape(s)\n"
#~ "using the origin reference when checked,\n"
#~ "and the center of the biggest bounding box\n"
#~ "of the selected shapes when unchecked."

#~ msgid "Value X:"
#~ msgstr "Value X:"

#~ msgid "Value for Offset action on X axis."
#~ msgstr "Value for Offset action on X axis."

#~ msgid ""
#~ "Offset the selected shape(s).\n"
#~ "The point of reference is the middle of\n"
#~ "the bounding box for all selected shapes.\n"
#~ msgstr ""
#~ "Offset the selected shape(s).\n"
#~ "The point of reference is the middle of\n"
#~ "the bounding box for all selected shapes.\n"

#~ msgid "Value Y:"
#~ msgstr "Value Y:"

#~ msgid "Value for Offset action on Y axis."
#~ msgstr "Value for Offset action on Y axis."

#~ msgid ""
#~ "Flip the selected shape(s) over the X axis.\n"
#~ "Does not create a new shape."
#~ msgstr ""
#~ "Flip the selected shape(s) over the X axis.\n"
#~ "Does not create a new shape."

#~ msgid "Ref Pt"
#~ msgstr "Ref Pt"

#~ msgid ""
#~ "Flip the selected shape(s)\n"
#~ "around the point in Point Entry Field.\n"
#~ "\n"
#~ "The point coordinates can be captured by\n"
#~ "left click on canvas together with pressing\n"
#~ "SHIFT key. \n"
#~ "Then click Add button to insert coordinates.\n"
#~ "Or enter the coords in format (x, y) in the\n"
#~ "Point Entry field and click Flip on X(Y)"
#~ msgstr ""
#~ "Flip the selected shape(s)\n"
#~ "around the point in Point Entry Field.\n"
#~ "\n"
#~ "The point coordinates can be captured by\n"
#~ "left click on canvas together with pressing\n"
#~ "SHIFT key. \n"
#~ "Then click Add button to insert coordinates.\n"
#~ "Or enter the coords in format (x, y) in the\n"
#~ "Point Entry field and click Flip on X(Y)"

#~ msgid "Point:"
#~ msgstr "Point:"

#~ msgid ""
#~ "Coordinates in format (x, y) used as reference for mirroring.\n"
#~ "The 'x' in (x, y) will be used when using Flip on X and\n"
#~ "the 'y' in (x, y) will be used when using Flip on Y."
#~ msgstr ""
#~ "Coordinates in format (x, y) used as reference for mirroring.\n"
#~ "The 'x' in (x, y) will be used when using Flip on X and\n"
#~ "the 'y' in (x, y) will be used when using Flip on Y."

#~ msgid ""
#~ "The point coordinates can be captured by\n"
#~ "left click on canvas together with pressing\n"
#~ "SHIFT key. Then click Add button to insert."
#~ msgstr ""
#~ "The point coordinates can be captured by\n"
#~ "left click on canvas together with pressing\n"
#~ "SHIFT key. Then click Add button to insert."

#~ msgid "No shape selected. Please Select a shape to rotate!"
#~ msgstr "No shape selected. Please Select a shape to rotate!"

#~ msgid "No shape selected. Please Select a shape to flip!"
#~ msgstr "No shape selected. Please Select a shape to flip!"

#~ msgid "No shape selected. Please Select a shape to shear/skew!"
#~ msgstr "No shape selected. Please Select a shape to shear/skew!"

#~ msgid "No shape selected. Please Select a shape to scale!"
#~ msgstr "No shape selected. Please Select a shape to scale!"

#~ msgid "No shape selected. Please Select a shape to offset!"
#~ msgstr "No shape selected. Please Select a shape to offset!"

#~ msgid ""
#~ "Scale the selected object(s)\n"
#~ "using the Scale_X factor for both axis."
#~ msgstr ""
#~ "Scale the selected object(s)\n"
#~ "using the Scale_X factor for both axis."

#~ msgid ""
#~ "Scale the selected object(s)\n"
#~ "using the origin reference when checked,\n"
#~ "and the center of the biggest bounding box\n"
#~ "of the selected objects when unchecked."
#~ msgstr ""
#~ "Scale the selected object(s)\n"
#~ "using the origin reference when checked,\n"
#~ "and the center of the biggest bounding box\n"
#~ "of the selected objects when unchecked."

#~ msgid "Mirror Reference"
#~ msgstr "Mirror Reference"

#~ msgid ""
#~ "Flip the selected object(s)\n"
#~ "around the point in Point Entry Field.\n"
#~ "\n"
#~ "The point coordinates can be captured by\n"
#~ "left click on canvas together with pressing\n"
#~ "SHIFT key. \n"
#~ "Then click Add button to insert coordinates.\n"
#~ "Or enter the coords in format (x, y) in the\n"
#~ "Point Entry field and click Flip on X(Y)"
#~ msgstr ""
#~ "Flip the selected object(s)\n"
#~ "around the point in Point Entry Field.\n"
#~ "\n"
#~ "The point coordinates can be captured by\n"
#~ "left click on canvas together with pressing\n"
#~ "SHIFT key. \n"
#~ "Then click Add button to insert coordinates.\n"
#~ "Or enter the coords in format (x, y) in the\n"
#~ "Point Entry field and click Flip on X(Y)"

#~ msgid ""
#~ "Coordinates in format (x, y) used as reference for mirroring.\n"
#~ "The 'x' in (x, y) will be used when using Flip on X and\n"
#~ "the 'y' in (x, y) will be used when using Flip on Y and"
#~ msgstr ""
#~ "Coordinates in format (x, y) used as reference for mirroring.\n"
#~ "The 'x' in (x, y) will be used when using Flip on X and\n"
#~ "the 'y' in (x, y) will be used when using Flip on Y and"

#~ msgid "Ref. Point"
#~ msgstr "Ref. Point"

#~ msgid "FlatCAM Object"
#~ msgstr "FlatCAM Object"

#~ msgid ""
#~ "Choose which tool to use for Gerber isolation:\n"
#~ "'Circular' or 'V-shape'.\n"
#~ "When the 'V-shape' is selected then the tool\n"
#~ "diameter will depend on the chosen cut depth."
#~ msgstr ""
#~ "Choose which tool to use for Gerber isolation:\n"
#~ "'Circular' or 'V-shape'.\n"
#~ "When the 'V-shape' is selected then the tool\n"
#~ "diameter will depend on the chosen cut depth."

#~ msgid "V-Shape"
#~ msgstr "V-Shape"

#~ msgid ""
#~ "Diameter of the cutting tool.\n"
#~ "If you want to have an isolation path\n"
#~ "inside the actual shape of the Gerber\n"
#~ "feature, use a negative value for\n"
#~ "this parameter."
#~ msgstr ""
#~ "Diameter of the cutting tool.\n"
#~ "If you want to have an isolation path\n"
#~ "inside the actual shape of the Gerber\n"
#~ "feature, use a negative value for\n"
#~ "this parameter."

#~ msgid "Pass overlap"
#~ msgstr "Pass overlap"

#~ msgid "Scope"
#~ msgstr "Scope"

#~ msgid "Clear N-copper"
#~ msgstr "Clear N-copper"

#~ msgid "Board cutout"
#~ msgstr "Board cutout"

#~ msgid ""
#~ "Add a new tool to the Tool Table\n"
#~ "with the specified diameter."
#~ msgstr ""
#~ "Add a new tool to the Tool Table\n"
#~ "with the specified diameter."

#~ msgid "Excellon Object Color"
#~ msgstr "Excellon Object Color"

#~ msgid "Geometry Object Color"
#~ msgstr "Geometry Object Color"

#~ msgid "Exterior"
#~ msgstr "Exterior"

#~ msgid "Gerber Object Color"
#~ msgstr "Gerber Object Color"

#~ msgid "Combine Passes"
#~ msgstr "Combine Passes"

#~ msgid "Rest Machining"
#~ msgstr "Rest Machining"

#~ msgid "NCC Plotting"
#~ msgstr "NCC Plotting"

#~ msgid "All Polygons"
#~ msgstr "All Polygons"

#~ msgid "Paint Plotting"
#~ msgstr "Paint Plotting"

#~ msgid ""
#~ "- 'Normal' -  normal plotting, done at the end of the Paint job\n"
#~ "- 'Progressive' - after each shape is generated it will be plotted."
#~ msgstr ""
#~ "- 'Normal' -  normal plotting, done at the end of the Paint job\n"
#~ "- 'Progressive' - after each shape is generated it will be plotted."

#~ msgid "Export Machine Code ..."
#~ msgstr "Export Machine Code ..."

#~ msgid "Export Machine Code cancelled ..."
#~ msgstr "Export Machine Code cancelled ..."

#~ msgid "Machine Code file saved to"
#~ msgstr "Machine Code file saved to"

#~ msgid "GCode Parameters"
#~ msgstr "GCode Parameters"

#~| msgid "Selection"
#~ msgid "PreSelection"
#~ msgstr "PreSelection"

#~ msgid "Copper Gerber"
#~ msgstr "Copper Gerber"

#~ msgid "QRCode Parameters"
#~ msgstr "QRCode Parameters"

#~ msgid "Gerber Files"
#~ msgstr "Gerber Files"

#~ msgid "Excellon Objects"
#~ msgstr "Excellon Objects"

#~ msgid "Gerber Solder paste object.                        "
#~ msgstr "Gerber Solder paste object.                        "

#~ msgid "Gerber Objects"
#~ msgstr "Gerber Objects"

#~ msgid "Geometry Objects"
#~ msgstr "Geometry Objects"

#~ msgid "Processing geometry from Subtractor Gerber object."
#~ msgstr "Processing geometry from Subtractor Gerber object."

#~ msgid "Parsing geometry for aperture"
#~ msgstr "Parsing geometry for aperture"

#~ msgid "Export FlatCAM Bookmarks"
#~ msgstr "Export FlatCAM Bookmarks"

#~ msgid "Import FlatCAM Bookmarks"
#~ msgstr "Import FlatCAM Bookmarks"

#~ msgid "Unifying Geometry from parsed Geometry segments"
#~ msgstr "Unifying Geometry from parsed Geometry segments"

#~ msgid "./assets/icon.png"
#~ msgstr "./assets/icon.png"

#~ msgid "New Blank Geometry"
#~ msgstr "New Blank Geometry"

#~ msgid "New Blank Gerber"
#~ msgstr "New Blank Gerber"

#~ msgid "New Blank Excellon"
#~ msgstr "New Blank Excellon"

#~| msgid "Clearance"
#~ msgid "Clear areas"
#~ msgstr "Clear areas"

#~ msgid "Apply Theme"
#~ msgstr "Apply Theme"

#~ msgid ""
#~ "Select a theme for FlatCAM.\n"
#~ "It will theme the plot area.\n"
#~ "The application will restart after change."
#~ msgstr ""
#~ "Select a theme for FlatCAM.\n"
#~ "It will theme the plot area.\n"
#~ "The application will restart after change."

#~ msgid "Film Object"
#~ msgstr "Film Object"

#~ msgid "Object for which to create the film."
#~ msgstr "Object for which to create the film."

#~ msgid "Box Object"
#~ msgstr "Box Object"

#~ msgid ""
#~ "The actual object that is used as container for the\n"
#~ " selected object for which we create the film.\n"
#~ "Usually it is the PCB outline but it can be also the\n"
#~ "same object for which the film is created."
#~ msgstr ""
#~ "The actual object that is used as container for the\n"
#~ " selected object for which we create the film.\n"
#~ "Usually it is the PCB outline but it can be also the\n"
#~ "same object for which the film is created."

#~ msgid "Expected -x <value> and -y <value>."
#~ msgstr "Expected -x <value> and -y <value>."

#~ msgid "Could not load factory defaults file."
#~ msgstr "Could not load factory defaults file."

#~ msgid "Failed to parse factory defaults file."
#~ msgstr "Failed to parse factory defaults file."

#~ msgid "Could not load preferences file."
#~ msgstr "Could not load preferences file."

#~ msgid "Failed to write factory defaults to file."
#~ msgstr "Failed to write factory defaults to file."

#~ msgid "Factory defaults saved."
#~ msgstr "Factory defaults saved."

#~ msgid ""
#~ "The Tool Type (TT) can be:<BR>- <B>Circular</B> with 1 ... 4 teeth -> it "
#~ "is informative only. Being circular, <BR>the cut width in material is "
#~ "exactly the tool diameter.<BR>- <B>Ball</B> -> informative only and make "
#~ "reference to the Ball type endmill.<BR>- <B>V-Shape</B> -> it will "
#~ "disable de Z-Cut parameter in the resulting geometry UI form and enable "
#~ "two additional UI form fields in the resulting geometry: V-Tip Dia and V-"
#~ "Tip Angle. Adjusting those two values will adjust the Z-Cut parameter "
#~ "such as the cut width into material will be equal with the value in the "
#~ "Tool Diameter column of this table.<BR>Choosing the <B>V-Shape</B> Tool "
#~ "Type automatically will select the Operation Type in the resulting "
#~ "geometry as Isolation."
#~ msgstr ""
#~ "The Tool Type (TT) can be:<BR>- <B>Circular</B> with 1 ... 4 teeth -> it "
#~ "is informative only. Being circular, <BR>the cut width in material is "
#~ "exactly the tool diameter.<BR>- <B>Ball</B> -> informative only and make "
#~ "reference to the Ball type endmill.<BR>- <B>V-Shape</B> -> it will "
#~ "disable de Z-Cut parameter in the resulting geometry UI form and enable "
#~ "two additional UI form fields in the resulting geometry: V-Tip Dia and V-"
#~ "Tip Angle. Adjusting those two values will adjust the Z-Cut parameter "
#~ "such as the cut width into material will be equal with the value in the "
#~ "Tool Diameter column of this table.<BR>Choosing the <B>V-Shape</B> Tool "
#~ "Type automatically will select the Operation Type in the resulting "
#~ "geometry as Isolation."

#~ msgid "e_fr_probe"
#~ msgstr "e_fr_probe"

#~ msgid ""
#~ " Could not generate punched hole Gerber because the punch hole sizeis "
#~ "bigger than some of the apertures in the Gerber object."
#~ msgstr ""
#~ " Could not generate punched hole Gerber because the punch hole sizeis "
#~ "bigger than some of the apertures in the Gerber object."

#~ msgid "Paint Tool. Normal painting all task started."
#~ msgstr "Paint Tool. Normal painting all task started."

#~ msgid "Rest machining painting all task started."
#~ msgstr "Rest machining painting all task started."

#~| msgid "Painting polygon at location"
#~ msgid "Painting polygons with method: lines."
#~ msgstr "Painting polygons with method: lines."

#~| msgid "Normal painting polygon task started."
#~ msgid "Failed. Painting polygons with method: seed."
#~ msgstr "Failed. Painting polygons with method: seed."

#~| msgid "Normal painting polygon task started."
#~ msgid "Failed. Painting polygons with method: standard."
#~ msgstr "Failed. Painting polygons with method: standard."

#~ msgid ""
#~ "Could not do Paint All. Try a different combination of parameters. Or a "
#~ "different Method of paint"
#~ msgstr ""
#~ "Could not do Paint All. Try a different combination of parameters. Or a "
#~ "different Method of paint"

#~| msgid "Paint Tool. Normal painting all task started."
#~ msgid "Paint Tool. Normal painting area task started."
#~ msgstr "Paint Tool. Normal painting area task started."

#~ msgid "Rest machining painting area task started."
#~ msgstr "Rest machining painting area task started."

#~ msgid "Executing Tcl Script ..."
#~ msgstr "Executing Tcl Script ..."

#~ msgid "Open cancelled."
#~ msgstr "Open cancelled."

#~ msgid "Preferences default restore was cancelled."
#~ msgstr "Preferences default restore was cancelled."

#~ msgid "FlatCAM preferences import cancelled."
#~ msgstr "FlatCAM preferences import cancelled."

#~ msgid "FlatCAM preferences export cancelled."
#~ msgstr "FlatCAM preferences export cancelled."

#~ msgid "Multigeo. Geometry merging finished"
#~ msgstr "Multigeo. Geometry merging finished"

#~ msgid "Units conversion cancelled."
#~ msgstr "Units conversion cancelled."

#~ msgid "Open Gerber cancelled."
#~ msgstr "Open Gerber cancelled."

#~ msgid " Open Excellon cancelled."
#~ msgstr " Open Excellon cancelled."

#~ msgid "Open G-Code cancelled."
#~ msgstr "Open G-Code cancelled."

#~ msgid "Open Project cancelled."
#~ msgstr "Open Project cancelled."

#~ msgid "Open HPGL2 file cancelled."
#~ msgstr "Open HPGL2 file cancelled."

#~ msgid "Open Config cancelled."
#~ msgstr "Open Config cancelled."

#~ msgid " Export SVG cancelled."
#~ msgstr " Export SVG cancelled."

#~ msgid "No object selected. Please select an Gerber object to export."
#~ msgstr "No object selected. Please select an Gerber object to export."

#~ msgid "Save Gerber source file cancelled."
#~ msgstr "Save Gerber source file cancelled."

#~ msgid "No object selected. Please select an Script object to export."
#~ msgstr "No object selected. Please select an Script object to export."

#~ msgid "Save Script source file cancelled."
#~ msgstr "Save Script source file cancelled."

#~ msgid "No object selected. Please select an Document object to export."
#~ msgstr "No object selected. Please select an Document object to export."

#~ msgid "Save Document source file cancelled."
#~ msgstr "Save Document source file cancelled."

#~ msgid "No object selected. Please select an Excellon object to export."
#~ msgstr "No object selected. Please select an Excellon object to export."

#~ msgid "Saving Excellon source file cancelled."
#~ msgstr "Saving Excellon source file cancelled."

#~ msgid "No object selected. Please Select an Excellon object to export."
#~ msgstr "No object selected. Please Select an Excellon object to export."

#~ msgid "Export Excellon cancelled."
#~ msgstr "Export Excellon cancelled."

#~ msgid "No object selected. Please Select an Gerber object to export."
#~ msgstr "No object selected. Please Select an Gerber object to export."

#~ msgid "Export Gerber cancelled."
#~ msgstr "Export Gerber cancelled."

#~ msgid "Export DXF cancelled."
#~ msgstr "Export DXF cancelled."

#~ msgid "Open SVG cancelled."
#~ msgstr "Open SVG cancelled."

#~ msgid "Open DXF cancelled."
#~ msgstr "Open DXF cancelled."

#~ msgid "Open TCL script cancelled."
#~ msgstr "Open TCL script cancelled."

#~ msgid "Run TCL script cancelled."
#~ msgstr "Run TCL script cancelled."

#~ msgid "Save Project cancelled."
#~ msgstr "Save Project cancelled."

#~ msgid "Save Object PDF cancelled."
#~ msgstr "Save Object PDF cancelled."

#~ msgid "FlatCAM bookmarks export cancelled."
#~ msgstr "FlatCAM bookmarks export cancelled."

#~ msgid "FlatCAM bookmarks import cancelled."
#~ msgstr "FlatCAM bookmarks import cancelled."

#~ msgid "FlatCAM Tools DB export cancelled."
#~ msgstr "FlatCAM Tools DB export cancelled."

#~ msgid "FlatCAM Tools DB import cancelled."
#~ msgstr "FlatCAM Tools DB import cancelled."

#~ msgid ""
#~ "Wrong value format for self.defaults[\"z_pdepth\"] or self."
#~ "options[\"z_pdepth\"]"
#~ msgstr ""
#~ "Wrong value format for self.defaults[\"z_pdepth\"] or self."
#~ "options[\"z_pdepth\"]"

#~ msgid ""
#~ "Wrong value format for self.defaults[\"feedrate_probe\"] or self."
#~ "options[\"feedrate_probe\"]"
#~ msgstr ""
#~ "Wrong value format for self.defaults[\"feedrate_probe\"] or self."
#~ "options[\"feedrate_probe\"]"

#~ msgid "Starting G-Code..."
#~ msgstr "Starting G-Code..."

#~ msgid ""
#~ "Algorithm to paint the polygon:<BR><B>Standard</B>: Fixed step inwards."
#~ "<BR><B>Seed-based</B>: Outwards from seed."
#~ msgstr ""
#~ "Algorithm to paint the polygon:<BR><B>Standard</B>: Fixed step inwards."
#~ "<BR><B>Seed-based</B>: Outwards from seed."

#~ msgid "Seed-based"
#~ msgstr "Seed-based"

#~ msgid "Straight lines"
#~ msgstr "Straight lines"

#~ msgid "Paint cancelled. No shape selected."
#~ msgstr "Paint cancelled. No shape selected."

#~ msgid "Transformation cancelled. No shape selected."
#~ msgstr "Transformation cancelled. No shape selected."

#~ msgid "Buffer cancelled. No shape selected."
#~ msgstr "Buffer cancelled. No shape selected."

#~ msgid "Export Code cancelled."
#~ msgstr "Export Code cancelled."

#~ msgid "Save Project C&opy ..."
#~ msgstr "Save Project C&opy ..."

#~ msgid "Change the size of the object."
#~ msgstr "Change the size of the object."

#~ msgid "Change the position of this object."
#~ msgstr "Change the position of this object."

#~ msgid "Vector"
#~ msgstr "Vector"

#~ msgid ""
#~ "Create a CNC Job object\n"
#~ "for this drill object."
#~ msgstr ""
#~ "Create a CNC Job object\n"
#~ "for this drill object."

#~ msgid ""
#~ "Choose what to use for GCode generation:\n"
#~ "'Drills', 'Slots' or 'Both'.\n"
#~ "When choosing 'Slots' or 'Both', slots will be\n"
#~ "converted to a series of drills."
#~ msgstr ""
#~ "Choose what to use for GCode generation:\n"
#~ "'Drills', 'Slots' or 'Both'.\n"
#~ "When choosing 'Slots' or 'Both', slots will be\n"
#~ "converted to a series of drills."

#~ msgid "Generate the CNC Job."
#~ msgstr "Generate the CNC Job."

#~ msgid "Add Tool from DataBase"
#~ msgstr "Add Tool from DataBase"

#~ msgid "Select a theme for FlatCAM."
#~ msgstr "Select a theme for FlatCAM."

#~ msgid "Conv."
#~ msgstr "Conv."

#~ msgid "Diameters of the cutting tools, separated by ','"
#~ msgstr "Diameters of the cutting tools, separated by ','"

#~ msgid "Tools dia"
#~ msgstr "Tools dia"

#~ msgid "The new tool diameter (cut width) to add in the tool table."
#~ msgstr "The new tool diameter (cut width) to add in the tool table."

#~ msgid ""
#~ "Algorithm for non-copper clearing:<BR><B>Standard</B>: Fixed step inwards."
#~ "<BR><B>Seed-based</B>: Outwards from seed.<BR><B>Line-based</B>: Parallel "
#~ "lines."
#~ msgstr ""
#~ "Algorithm for non-copper clearing:<BR><B>Standard</B>: Fixed step inwards."
#~ "<BR><B>Seed-based</B>: Outwards from seed.<BR><B>Line-based</B>: Parallel "
#~ "lines."

#~ msgid "Ref"
#~ msgstr "Ref"

#~ msgid ""
#~ "- 'Itself' -  the non copper clearing extent\n"
#~ "is based on the object that is copper cleared.\n"
#~ "- 'Area Selection' - left mouse click to start selection of the area to "
#~ "be painted.\n"
#~ "Keeping a modifier key pressed (CTRL or SHIFT) will allow to add multiple "
#~ "areas.\n"
#~ "- 'Reference Object' -  will do non copper clearing within the area\n"
#~ "specified by another object."
#~ msgstr ""
#~ "- 'Itself' -  the non copper clearing extent\n"
#~ "is based on the object that is copper cleared.\n"
#~ "- 'Area Selection' - left mouse click to start selection of the area to "
#~ "be painted.\n"
#~ "Keeping a modifier key pressed (CTRL or SHIFT) will allow to add multiple "
#~ "areas.\n"
#~ "- 'Reference Object' -  will do non copper clearing within the area\n"
#~ "specified by another object."

#~ msgid "Sel"
#~ msgstr "Sel"

#~ msgid "Diameters of nozzle tools, separated by ','"
#~ msgstr "Diameters of nozzle tools, separated by ','"

#~ msgid "Reference Gerber"
#~ msgstr "Reference Gerber"

#~ msgid "Reference Excellon"
#~ msgstr "Reference Excellon"

#~ msgid "Reference Geometry"
#~ msgstr "Reference Geometry"

#~ msgid "Point/Box Reference"
#~ msgstr "Point/Box Reference"

#~ msgid ""
#~ "If 'Point' is selected above it store the coordinates (x, y) through "
#~ "which\n"
#~ "the mirroring axis passes.\n"
#~ "If 'Box' is selected above, select here a FlatCAM object (Gerber, Exc or "
#~ "Geo).\n"
#~ "Through the center of this object pass the mirroring axis selected above."
#~ msgstr ""
#~ "If 'Point' is selected above it store the coordinates (x, y) through "
#~ "which\n"
#~ "the mirroring axis passes.\n"
#~ "If 'Box' is selected above, select here a FlatCAM object (Gerber, Exc or "
#~ "Geo).\n"
#~ "Through the center of this object pass the mirroring axis selected above."

#~ msgid ""
#~ "'Point' coordinates missing. Using Origin (0, 0) as mirroring reference."
#~ msgstr ""
#~ "'Point' coordinates missing. Using Origin (0, 0) as mirroring reference."

#~ msgid "Export positive film cancelled."
#~ msgstr "Export positive film cancelled."

#~ msgid "Export negative film cancelled."
#~ msgstr "Export negative film cancelled."

#~ msgid "Move action cancelled."
#~ msgstr "Move action cancelled."

#~ msgid "Create Paint Geometry"
#~ msgstr "Create Paint Geometry"

#~ msgid "Paint Tool. Reading parameters."
#~ msgstr "Paint Tool. Reading parameters."

#~ msgid "Properties Tool was not displayed. No object selected."
#~ msgstr "Properties Tool was not displayed. No object selected."

#~ msgid " Export PNG cancelled."
#~ msgstr " Export PNG cancelled."

#~ msgid "Adding Nozzle tool cancelled. Tool already in Tool Table."
#~ msgstr "Adding Nozzle tool cancelled. Tool already in Tool Table."

#~ msgid ""
#~ "None of the following args: 'ref', 'all' were found or none was set to "
#~ "1.\n"
#~ "Copper clearing failed."
#~ msgstr ""
#~ "None of the following args: 'ref', 'all' were found or none was set to "
#~ "1.\n"
#~ "Copper clearing failed."

#~ msgid "PostProcessor"
#~ msgstr "PostProcessor"

#~ msgid "Default <b>Zeros</b>"
#~ msgstr "Default <b>Zeros</b>"

#~ msgid ""
#~ "This sets the default type of Excellon zeros.\n"
#~ "If it is not detected in the parsed file the value here\n"
#~ "will be used.If LZ then Leading Zeros are kept and\n"
#~ "Trailing Zeros are removed.\n"
#~ "If TZ is checked then Trailing Zeros are kept\n"
#~ "and Leading Zeros are removed."
#~ msgstr ""
#~ "This sets the default type of Excellon zeros.\n"
#~ "If it is not detected in the parsed file the value here\n"
#~ "will be used.If LZ then Leading Zeros are kept and\n"
#~ "Trailing Zeros are removed.\n"
#~ "If TZ is checked then Trailing Zeros are kept\n"
#~ "and Leading Zeros are removed."

#~ msgid "Default <b>Units</b>"
#~ msgstr "Default <b>Units</b>"

#~ msgid "Coordinates decimals"
#~ msgstr "Coordinates decimals"

#~ msgid "Feedrate decimals"
#~ msgstr "Feedrate decimals"

#~ msgid "Rest M."
#~ msgstr "Rest M."

#~ msgid "Convex Sh."
#~ msgstr "Convex Sh."

#~ msgid "Add Tool to Tools DB"
#~ msgstr "Add Tool to Tools DB"

#~ msgid "Remove Tool from Tools DB"
#~ msgstr "Remove Tool from Tools DB"

#~ msgid "Export Tool DB"
#~ msgstr "Export Tool DB"

#~ msgid "Import Tool DB"
#~ msgstr "Import Tool DB"

#~ msgid "Please enter the desired tool diameter in Float format."
#~ msgstr "Please enter the desired tool diameter in Float format."

#~ msgid "Default Tool added. Wrong value format entered."
#~ msgstr "Default Tool added. Wrong value format entered."

#~ msgid "Import Preferences"
#~ msgstr "Import Preferences"

#~ msgid ""
#~ "Import a full set of FlatCAM settings from a file\n"
#~ "previously saved on HDD.\n"
#~ "\n"
#~ "FlatCAM automatically save a 'factory_defaults' file\n"
#~ "on the first start. Do not delete that file."
#~ msgstr ""
#~ "Import a full set of FlatCAM settings from a file\n"
#~ "previously saved on HDD.\n"
#~ "\n"
#~ "FlatCAM automatically save a 'factory_defaults' file\n"
#~ "on the first start. Do not delete that file."

#~ msgid "Export Preferences"
#~ msgstr "Export Preferences"

#~ msgid ""
#~ "Export a full set of FlatCAM settings in a file\n"
#~ "that is saved on HDD."
#~ msgstr ""
#~ "Export a full set of FlatCAM settings in a file\n"
#~ "that is saved on HDD."

#~ msgid "Start move Z"
#~ msgstr "Start move Z"

#~ msgid "Grid X value"
#~ msgstr "Grid X value"

#~ msgid "Grid Y value"
#~ msgstr "Grid Y value"

#~ msgid "Wk. size"
#~ msgstr "Wk. size"

#~ msgid "Sel. Fill"
#~ msgstr "Sel. Fill"

#~ msgid "Sel. Line"
#~ msgstr "Sel. Line"

#~ msgid "Sel2. Fill"
#~ msgstr "Sel2. Fill"

#~ msgid "Sel2. Line"
#~ msgstr "Sel2. Line"

#~ msgid "Editor Draw Sel."
#~ msgstr "Editor Draw Sel."

#~ msgid "Proj. Dis. Items"
#~ msgstr "Proj. Dis. Items"

#~ msgid "Sel. Shape"
#~ msgstr "Sel. Shape"

#~ msgid "NB Font Size"
#~ msgstr "NB Font Size"

#~ msgid "Axis Font Size"
#~ msgstr "Axis Font Size"

#~ msgid "Textbox Font Size"
#~ msgstr "Textbox Font Size"

#~ msgid "Shell at StartUp"
#~ msgstr "Shell at StartUp"

#~ msgid "Project at StartUp"
#~ msgstr "Project at StartUp"

#~ msgid "Mouse Cursor"
#~ msgstr "Mouse Cursor"

#~ msgid ""
#~ "Set the language used throughout FlatCAM.\n"
#~ "The app will restart after click.Windows: When FlatCAM is installed in "
#~ "Program Files\n"
#~ "directory, it is possible that the app will not\n"
#~ "restart after the button is clicked due of Windows\n"
#~ "security features. In this case the language will be\n"
#~ "applied at the next app start."
#~ msgstr ""
#~ "Set the language used throughout FlatCAM.\n"
#~ "The app will restart after click.Windows: When FlatCAM is installed in "
#~ "Program Files\n"
#~ "directory, it is possible that the app will not\n"
#~ "restart after the button is clicked due of Windows\n"
#~ "security features. In this case the language will be\n"
#~ "applied at the next app start."

#~ msgid "G-code does not have a units code: either G20 or G21"
#~ msgstr "G-code does not have a units code: either G20 or G21"

#, python-brace-format
#~ msgid ""
#~ "[selected] {kind} created/selected: <span style=\"color:{color};\">{name}"
#~ "</span>"
#~ msgstr ""
#~ "[selected] {kind} created/selected: <span style=\"color:{color};\">{name}"
#~ "</span>"

#, python-brace-format
#~ msgid "[selected]<span style=\"color:{color};\">{name}</span> selected"
#~ msgstr "[selected]<span style=\"color:{color};\">{name}</span> selected"

#, python-brace-format
#~ msgid "{l_save}/Project_{date}"
#~ msgstr "{l_save}/Project_{date}"

#, python-brace-format
#~| msgid "{l_save}/Project_{date}"
#~ msgid "{l_save}/{obj_name}_{date}"
#~ msgstr "{l_save}/{obj_name}_{date}"

#, python-format
#~ msgid ""
#~ "How much (fraction) of the tool width to overlap each tool pass.\n"
#~ "Example:\n"
#~ "A value here of 0.25 means 25%% from the tool diameter found above.\n"
#~ "\n"
#~ "Adjust the value starting with lower values\n"
#~ "and increasing it if areas that should be painted are still \n"
#~ "not painted.\n"
#~ "Lower values = faster processing, faster execution on CNC.\n"
#~ "Higher values = slow processing and slow execution on CNC\n"
#~ "due of too many paths."
#~ msgstr ""
#~ "How much (fraction) of the tool width to overlap each tool pass.\n"
#~ "Example:\n"
#~ "A value here of 0.25 means 25%% from the tool diameter found above.\n"
#~ "\n"
#~ "Adjust the value starting with lower values\n"
#~ "and increasing it if areas that should be painted are still \n"
#~ "not painted.\n"
#~ "Lower values = faster processing, faster execution on CNC.\n"
#~ "Higher values = slow processing and slow execution on CNC\n"
#~ "due of too many paths."

#~ msgid ""
#~ "Type here any G-Code commands you would like to append to the generated "
#~ "file. I.e.: M2 (End of program)"
#~ msgstr ""
#~ "Type here any G-Code commands you would like to append to the generated "
#~ "file. I.e.: M2 (End of program)"

#~ msgid ""
#~ "Can be:\n"
#~ "- Portrait\n"
#~ "- Lanscape"
#~ msgstr ""
#~ "Can be:\n"
#~ "- Portrait\n"
#~ "- Lanscape"

#~ msgid ""
#~ "- 'Rectangular' - the bounding box will be of rectangular shape.\n"
#~ " - 'Minimal' - the bounding box will be the convex hull shape."
#~ msgstr ""
#~ "- 'Rectangular' - the bounding box will be of rectangular shape.\n"
#~ " - 'Minimal' - the bounding box will be the convex hull shape."

#~ msgid ""
#~ "- 'Solid' - copper thieving will be a solid polygon.\n"
#~ " - 'Dots Grid' - the empty area will be filled with a pattern of dots.\n"
#~ "- 'Squares Grid' - the empty area will be filled with a pattern of "
#~ "squares.\n"
#~ "- 'Lines Grid' - the empty area will be filled with a pattern of lines."
#~ msgstr ""
#~ "- 'Solid' - copper thieving will be a solid polygon.\n"
#~ " - 'Dots Grid' - the empty area will be filled with a pattern of dots.\n"
#~ "- 'Squares Grid' - the empty area will be filled with a pattern of "
#~ "squares.\n"
#~ "- 'Lines Grid' - the empty area will be filled with a pattern of lines."

#~ msgid "Calibrate Tool"
#~ msgstr "Calibrate Tool"

#, python-brace-format
#~ msgid "MEASURING: Result D(x) = {d_x} | D(y) = {d_y} | Distance = {d_z}"
#~ msgstr "MEASURING: Result D(x) = {d_x} | D(y) = {d_y} | Distance = {d_z}"

#~ msgid "Paint Area"
#~ msgstr "Paint Area"

#~ msgid ""
#~ "Generate GCode file to locate and align the PCB by using\n"
#~ "the four points acquired above."
#~ msgstr ""
#~ "Generate GCode file to locate and align the PCB by using\n"
#~ "the four points acquired above."

#~ msgid "Axis Ref:"
#~ msgstr "Axis Ref:"

#~ msgid "Change project units ..."
#~ msgstr "Change project units ..."

#~ msgid "Tool diameter value is missing or wrong format. Add it and retry."
#~ msgstr "Tool diameter value is missing or wrong format. Add it and retry."

#~ msgid "Overlap value is missing or wrong format. Add it and retry."
#~ msgstr "Overlap value is missing or wrong format. Add it and retry."

#~ msgid "Margin distance value is missing or wrong format. Add it and retry."
#~ msgstr "Margin distance value is missing or wrong format. Add it and retry."

#, python-format
#~ msgid ""
#~ "How much (fraction) of the tool width to overlap each tool pass.\n"
#~ "Example:\n"
#~ "A value here of 0.25 means an overlap of 25%% from the tool diameter "
#~ "found above."
#~ msgstr ""
#~ "How much (fraction) of the tool width to overlap each tool pass.\n"
#~ "Example:\n"
#~ "A value here of 0.25 means an overlap of 25%% from the tool diameter "
#~ "found above."

#~ msgid "Feed Rate X-Y"
#~ msgstr "Feed Rate X-Y"

#~ msgid "Feed Rate Z"
#~ msgstr "Feed Rate Z"

#~ msgid "Feed Rate Rapids"
#~ msgstr "Feed Rate Rapids"

#~ msgid "Generate"
#~ msgstr "Generate"

#~| msgid "STEP 1"
#~ msgid "STEP 5"
#~ msgstr "STEP 5"

#~| msgid "Calc. Tool"
#~ msgid "Cal Exc Tool"
#~ msgstr "Cal Exc Tool"

#~ msgid "Object to be cutout.                        "
#~ msgstr "Object to be cutout.                        "

#~ msgid "Margin:"
#~ msgstr "Margin:"

#~ msgid "Gap size:"
#~ msgstr "Gap size:"

#~ msgid ""
#~ "The cutout shape can be of ny shape.\n"
#~ "Useful when the PCB has a non-rectangular shape."
#~ msgstr ""
#~ "The cutout shape can be of ny shape.\n"
#~ "Useful when the PCB has a non-rectangular shape."

#~ msgid ""
#~ "The resulting cutout shape is\n"
#~ "always a rectangle shape and it will be\n"
#~ "the bounding box of the Object."
#~ msgstr ""
#~ "The resulting cutout shape is\n"
#~ "always a rectangle shape and it will be\n"
#~ "the bounding box of the Object."

#~ msgid "Geo Obj"
#~ msgstr "Geo Obj"

#~ msgid ""
#~ "Use the left mouse button (LMB) click\n"
#~ "to create a bridge gap to separate the PCB from\n"
#~ "the surrounding material."
#~ msgstr ""
#~ "Use the left mouse button (LMB) click\n"
#~ "to create a bridge gap to separate the PCB from\n"
#~ "the surrounding material."

#~ msgid "Generate Gap"
#~ msgstr "Generate Gap"

#~ msgid "Resets all the fields."
#~ msgstr "Resets all the fields."

#~ msgid "Overlap value must be between 0 (inclusive) and 1 (exclusive), "
#~ msgstr "Overlap value must be between 0 (inclusive) and 1 (exclusive), "

#~ msgid "Overlap value must be between 0 (inclusive) and 1 (exclusive)"
#~ msgstr "Overlap value must be between 0 (inclusive) and 1 (exclusive)"

#~ msgid "Click inside the desired polygon."
#~ msgstr "Click inside the desired polygon."

#~ msgid ""
#~ "#\n"
#~ "# CREATE A NEW FLATCAM TCL SCRIPT\n"
#~ "# TCL Tutorial here: https://www.tcl.tk/man/tcl8.5/tutorial/tcltutorial."
#~ "html\n"
#~ "#\n"
#~ "\n"
#~ "# FlatCAM commands list:\n"
#~ "# AddCircle, AddPolygon, AddPolyline, AddRectangle, AlignDrill, "
#~ "AlignDrillGrid, ClearShell, ClearCopper,\n"
#~ "# Cncjob, Cutout, Delete, Drillcncjob, ExportGcode, ExportSVG, Exteriors, "
#~ "GeoCutout, GeoUnion, GetNames,\n"
#~ "# GetSys, ImportSvg, Interiors, Isolate, Follow, JoinExcellon, "
#~ "JoinGeometry, ListSys, MillDrills,\n"
#~ "# MillSlots, Mirror, New, NewGeometry, Offset, OpenExcellon, OpenGCode, "
#~ "OpenGerber, OpenProject,\n"
#~ "# Options, Paint, Panelize, Plot, SaveProject, SaveSys, Scale, SetActive, "
#~ "SetSys, Skew, SubtractPoly,\n"
#~ "# SubtractRectangle, Version, WriteGCode\n"
#~ "#\n"
#~ "\n"
#~ msgstr ""
#~ "#\n"
#~ "# CREATE A NEW FLATCAM TCL SCRIPT\n"
#~ "# TCL Tutorial here: https://www.tcl.tk/man/tcl8.5/tutorial/tcltutorial."
#~ "html\n"
#~ "#\n"
#~ "\n"
#~ "# FlatCAM commands list:\n"
#~ "# AddCircle, AddPolygon, AddPolyline, AddRectangle, AlignDrill, "
#~ "AlignDrillGrid, ClearShell, ClearCopper,\n"
#~ "# Cncjob, Cutout, Delete, Drillcncjob, ExportGcode, ExportSVG, Exteriors, "
#~ "GeoCutout, GeoUnion, GetNames,\n"
#~ "# GetSys, ImportSvg, Interiors, Isolate, Follow, JoinExcellon, "
#~ "JoinGeometry, ListSys, MillDrills,\n"
#~ "# MillSlots, Mirror, New, NewGeometry, Offset, OpenExcellon, OpenGCode, "
#~ "OpenGerber, OpenProject,\n"
#~ "# Options, Paint, Panelize, Plot, SaveProject, SaveSys, Scale, SetActive, "
#~ "SetSys, Skew, SubtractPoly,\n"
#~ "# SubtractRectangle, Version, WriteGCode\n"
#~ "#\n"
#~ "\n"

#~ msgid "Export G-Code ..."
#~ msgstr "Export G-Code ..."

#~ msgid "&View"
#~ msgstr "&View"

#~ msgid "&Tool"
#~ msgstr "&Tool"

#~ msgid "APP.  DEFAULTS"
#~ msgstr "APP.  DEFAULTS"

#~ msgid "PROJ. OPTIONS "
#~ msgstr "PROJ. OPTIONS "

#~ msgid "FULL Geo"
#~ msgstr "FULL Geo"

#~ msgid ""
#~ "Create the Geometry Object\n"
#~ "for isolation routing. It contains both\n"
#~ "the interiors and exteriors geometry."
#~ msgstr ""
#~ "Create the Geometry Object\n"
#~ "for isolation routing. It contains both\n"
#~ "the interiors and exteriors geometry."

#~ msgid "Ext Geo"
#~ msgstr "Ext Geo"

#~ msgid ""
#~ "Create the Geometry Object\n"
#~ "for isolation routing containing\n"
#~ "only the exteriors geometry."
#~ msgstr ""
#~ "Create the Geometry Object\n"
#~ "for isolation routing containing\n"
#~ "only the exteriors geometry."

#~ msgid "Int Geo"
#~ msgstr "Int Geo"

#~ msgid ""
#~ "Create the Geometry Object\n"
#~ "for isolation routing containing\n"
#~ "only the interiors geometry."
#~ msgstr ""
#~ "Create the Geometry Object\n"
#~ "for isolation routing containing\n"
#~ "only the interiors geometry."

#~ msgid ""
#~ "Select from the Tools Table above\n"
#~ "the hole dias that are to be drilled.\n"
#~ "Use the # column to make the selection."
#~ msgstr ""
#~ "Select from the Tools Table above\n"
#~ "the hole dias that are to be drilled.\n"
#~ "Use the # column to make the selection."

#~ msgid "Wk. format"
#~ msgstr "Wk. format"

#~ msgid "y_toolchange = Y coord for Toolchange"
#~ msgstr "y_toolchange = Y coord for Toolchange"

#~ msgid "Ref."
#~ msgstr "Ref."

#~ msgid "Gerber   Reference Box Object"
#~ msgstr "Gerber   Reference Box Object"

#~ msgid "Excellon Reference Box Object"
#~ msgstr "Excellon Reference Box Object"

#~ msgid "Geometry Reference Box Object"
#~ msgstr "Geometry Reference Box Object"

#~ msgid "{l_save}/FlatCAM_Bookmarks_{date}"
#~ msgstr "{l_save}/FlatCAM_Bookmarks_{date}"

#~ msgid "Could not load bookamrks file."
#~ msgstr "Could not load bookamrks file."

#~ msgid "&Help"
#~ msgstr "&Help"

#~ msgid "tool = tool number"
#~ msgstr "tool = tool number"

#~ msgid "t_drills = for Excellon, total number of drills"
#~ msgstr "t_drills = for Excellon, total number of drills"

#~ msgid "x_toolchange = X coord for Toolchange"
#~ msgstr "x_toolchange = X coord for Toolchange"

#~ msgid "z_toolchange = Z coord for Toolchange"
#~ msgstr "z_toolchange = Z coord for Toolchange"

#~ msgid "z_depthpercut = the step value for multidepth cut"
#~ msgstr "z_depthpercut = the step value for multidepth cut"

#~ msgid "spindlesspeed = the value for the spindle speed"
#~ msgstr "spindlesspeed = the value for the spindle speed"

#~ msgid "Rotate Angle"
#~ msgstr "Rotate Angle"

#~ msgid "Skew_X angle"
#~ msgstr "Skew_X angle"

#~ msgid "Skew_Y angle"
#~ msgstr "Skew_Y angle"

#~ msgid "Scale_Y factor"
#~ msgstr "Scale_Y factor"

#~ msgid "Offset_X val"
#~ msgstr "Offset_X val"

#~ msgid "Offset_Y val"
#~ msgstr "Offset_Y val"

#~ msgid " Mirror Ref. Point"
#~ msgstr " Mirror Ref. Point"

#~ msgid "The Gerber Copper Bottom file for which rules are checked."
#~ msgstr "The Gerber Copper Bottom file for which rules are checked."

#~ msgid "The Gerber Silkscreen Bottom file for which rules are checked."
#~ msgstr "The Gerber Silkscreen Bottom file for which rules are checked."

#~| msgid "Excellon file"
#~ msgid "Excellon Files"
#~ msgstr "Excellon Files"

#~ msgid "There are no polygons to mark area."
#~ msgstr "There are no polygons to mark area."

#~ msgid "&Edit"
#~ msgstr "&Edit"

#~ msgid "&Options"
#~ msgstr "&Options"

#~ msgid "Measurement Tool"
#~ msgstr "Measurement Tool"

#~ msgid "Margin value is missing or wrong format. Add it and retry."
#~ msgstr "Margin value is missing or wrong format. Add it and retry."

#~ msgid "Gap size value is missing or wrong format. Add it and retry."
#~ msgstr "Gap size value is missing or wrong format. Add it and retry."

#~ msgid "Measurement"
#~ msgstr "Measurement"

#~ msgid "Meas. Tool"
#~ msgstr "Meas. Tool"

#~ msgid "Not available with the current Graphic Engine Legacy(2D)."
#~ msgstr "Not available with the current Graphic Engine Legacy(2D)."

#~ msgid "ToolMove.on_left_click()"
#~ msgstr "ToolMove.on_left_click()"

#~ msgid "on_paint_button_click"
#~ msgstr "on_paint_button_click"

#~ msgid "PaintTool.paint_poly()"
#~ msgstr "PaintTool.paint_poly()"

#~ msgid "ToolSolderPaste.on_view_gcode()"
#~ msgstr "ToolSolderPaste.on_view_gcode()"

#~ msgid "App.on_fileopenscript() -->"
#~ msgstr "App.on_fileopenscript() -->"

#~ msgid "<span style=\"color:green;\"><b>%s</b></span>"
#~ msgstr "<span style=\"color:green;\"><b>%s</b></span>"

#~ msgid "<span style=\"color:red;\"><b>%s</b></span>"
#~ msgstr "<span style=\"color:red;\"><b>%s</b></span>"

#~ msgid "FlatCAMObj.GeometryObject.mtool_gen_cncjob() -->"
#~ msgstr "FlatCAMObj.GeometryObject.mtool_gen_cncjob() -->"

#~ msgid "FlatCAMCNNJob.on_review_code_click() -->"
#~ msgstr "FlatCAMCNNJob.on_review_code_click() -->"

#~ msgid ""
#~ "toolbars, key shortcuts or even dragging and dropping the files on the GUI"
#~ msgstr ""
#~ "toolbars, key shortcuts or even dragging and dropping the files on the GUI"

#~ msgid ""
#~ "You can also load a FlatCAM project by double clicking on the project "
#~ "file, drag"
#~ msgstr ""
#~ "You can also load a FlatCAM project by double clicking on the project "
#~ "file, drag"

#~ msgid ""
#~ "Once an object is available in the Project Tab, by selecting it and then "
#~ "focusing on"
#~ msgstr ""
#~ "Once an object is available in the Project Tab, by selecting it and then "
#~ "focusing on"

#~ msgid "SELECTED TAB"
#~ msgstr "SELECTED TAB"

#~ msgid "more simpler is to double click the object name in the Project Tab"
#~ msgstr "more simpler is to double click the object name in the Project Tab"

#~ msgid "will be updated with the object properties according to"
#~ msgstr "will be updated with the object properties according to"

#~ msgid "kind: Gerber, Excellon, Geometry or CNCJob object"
#~ msgstr "kind: Gerber, Excellon, Geometry or CNCJob object"

#~ msgid ""
#~ "If the selection of the object is done on the canvas by single click "
#~ "instead, and the"
#~ msgstr ""
#~ "If the selection of the object is done on the canvas by single click "
#~ "instead, and the"

#~ msgid "and populate it even if it was out of focus"
#~ msgstr "and populate it even if it was out of focus"

#~ msgid "Gerber/Excellon Object"
#~ msgstr "Gerber/Excellon Object"

#~ msgid "Add tools (change param in Selected Tab)"
#~ msgstr "Add tools (change param in Selected Tab)"

#~ msgid "Generate CNCJob"
#~ msgstr "Generate CNCJob"

#~ msgid ""
#~ "Verify GCode (through Edit CNC Code) and/or append/prepend to GCode "
#~ "(again, done in"
#~ msgstr ""
#~ "Verify GCode (through Edit CNC Code) and/or append/prepend to GCode "
#~ "(again, done in"

#~ msgid "or through"
#~ msgstr "or through"

#~ msgid "own key shortcut"
#~ msgstr "own key shortcut"

#~ msgid "polygons"
#~ msgstr "polygons"

#~ msgid "geo"
#~ msgstr "geo"

#~ msgid "Stop"
#~ msgstr "Stop"

#~ msgid "Spawning copies"
#~ msgstr "Spawning copies"

#~ msgid "Parsing tool"
#~ msgstr "Parsing tool"

#~ msgid ""
#~ " Wrong value format for self.defaults[\"feedrate_probe\"] or self."
#~ "options[\"feedrate_probe\"]"
#~ msgstr ""
#~ " Wrong value format for self.defaults[\"feedrate_probe\"] or self."
#~ "options[\"feedrate_probe\"]"

#~ msgid "Wrong optimization type selected."
#~ msgstr "Wrong optimization type selected."

#~ msgid "FILE ASSOCIATIONS"
#~ msgstr "FILE ASSOCIATIONS"

#~ msgid "MH"
#~ msgstr "MH"

#~ msgid "Feedrate (Plunge)"
#~ msgstr "Feedrate (Plunge)"

#~ msgid ""
#~ "Parameters used to create a CNC Job object\n"
#~ "for this drill object that are shown when App Level is Advanced."
#~ msgstr ""
#~ "Parameters used to create a CNC Job object\n"
#~ "for this drill object that are shown when App Level is Advanced."

#~ msgid ""
#~ "Parameters to create a CNC Job object\n"
#~ "tracing the contours of a Geometry object."
#~ msgstr ""
#~ "Parameters to create a CNC Job object\n"
#~ "tracing the contours of a Geometry object."

#~ msgid "Manufacturing"
#~ msgstr "Manufacturing"

#~ msgid "Function"
#~ msgstr "Function"

#~ msgid ""
#~ "Juan Pablo Caram <BR><BR>Denis Hayrullin<BR>Kamil Sopko<BR>Marius "
#~ "Stanciu<BR>Matthieu Berthomé<BR><Br>and many others found <a href = "
#~ "\"https://bitbucket.org/jpcgt/flatcam/pull-requests/?state=MERGED\">here."
#~ "</a><BR><BR>"
#~ msgstr ""
#~ "Juan Pablo Caram <BR><BR>Denis Hayrullin<BR>Kamil Sopko<BR>Marius "
#~ "Stanciu<BR>Matthieu Berthomé<BR><Br>and many others found <a href = "
#~ "\"https://bitbucket.org/jpcgt/flatcam/pull-requests/?state=MERGED\">here."
#~ "</a><BR><BR>"

#~ msgid ""
#~ "\n"
#~ "<p><span style=\"font-size:{tsize}px\"><strong>Selected Tab - Choose an "
#~ "Item from Project Tab</strong></span></p>\n"
#~ "\n"
#~ "<p><span style=\"font-size:{fsize}px\"><strong>Details</strong>:<br />\n"
#~ "The normal flow when working in FlatCAM is the following:</span></p>\n"
#~ "\n"
#~ "<ol>\n"
#~ "\t<li><span style=\"font-size:{fsize}px\">Loat/Import a Gerber, Excellon, "
#~ "Gcode, DXF, Raster Image or SVG file into FlatCAM using either the "
#~ "menu&#39;s, toolbars, key shortcuts or even dragging and dropping the "
#~ "files on the GUI.<br />\n"
#~ "\t<br />\n"
#~ "\tYou can also load a <strong>FlatCAM project</strong> by double clicking "
#~ "on the project file, drag &amp; drop of the file into the FLATCAM GUI or "
#~ "through the menu/toolbar links offered within the app.</span><br />\n"
#~ "\t&nbsp;</li>\n"
#~ "\t<li><span style=\"font-size:{fsize}px\">Once an object is available in "
#~ "the Project Tab, by selecting it and then focusing on <strong>SELECTED "
#~ "TAB </strong>(more simpler is to double click the object name in the "
#~ "Project Tab), <strong>SELECTED TAB </strong>will be updated with the "
#~ "object properties according to it&#39;s kind: Gerber, Excellon, Geometry "
#~ "or CNCJob object.<br />\n"
#~ "\t<br />\n"
#~ "\tIf the selection of the object is done on the canvas by single click "
#~ "instead, and the <strong>SELECTED TAB</strong> is in focus, again the "
#~ "object properties will be displayed into the Selected Tab. Alternatively, "
#~ "double clicking on the object on the canvas will bring the "
#~ "<strong>SELECTED TAB</strong> and populate it even if it was out of focus."
#~ "<br />\n"
#~ "\t<br />\n"
#~ "\tYou can change the parameters in this screen and the flow direction is "
#~ "like this:<br />\n"
#~ "\t<br />\n"
#~ "\t<strong>Gerber/Excellon Object</strong> -&gt; Change Param -&gt; "
#~ "Generate Geometry -&gt;<strong> Geometry Object </strong>-&gt; Add tools "
#~ "(change param in Selected Tab) -&gt; Generate CNCJob -&gt;<strong> CNCJob "
#~ "Object </strong>-&gt; Verify GCode (through Edit CNC Code) and/or append/"
#~ "prepend to GCode (again, done in <strong>SELECTED TAB)&nbsp;</strong>-"
#~ "&gt; Save GCode</span></li>\n"
#~ "</ol>\n"
#~ "\n"
#~ "<p><span style=\"font-size:{fsize}px\">A list of key shortcuts is "
#~ "available through an menu entry in <strong>Help -&gt; Shortcuts List</"
#~ "strong>&nbsp;or through it&#39;s own key shortcut: <strong>F3</strong>.</"
#~ "span></p>\n"
#~ "\n"
#~ "        "
#~ msgstr ""
#~ "\n"
#~ "<p><span style=\"font-size:{tsize}px\"><strong>Selected Tab - Choose an "
#~ "Item from Project Tab</strong></span></p>\n"
#~ "\n"
#~ "<p><span style=\"font-size:{fsize}px\"><strong>Details</strong>:<br />\n"
#~ "The normal flow when working in FlatCAM is the following:</span></p>\n"
#~ "\n"
#~ "<ol>\n"
#~ "\t<li><span style=\"font-size:{fsize}px\">Loat/Import a Gerber, Excellon, "
#~ "Gcode, DXF, Raster Image or SVG file into FlatCAM using either the "
#~ "menu&#39;s, toolbars, key shortcuts or even dragging and dropping the "
#~ "files on the GUI.<br />\n"
#~ "\t<br />\n"
#~ "\tYou can also load a <strong>FlatCAM project</strong> by double clicking "
#~ "on the project file, drag &amp; drop of the file into the FLATCAM GUI or "
#~ "through the menu/toolbar links offered within the app.</span><br />\n"
#~ "\t&nbsp;</li>\n"
#~ "\t<li><span style=\"font-size:{fsize}px\">Once an object is available in "
#~ "the Project Tab, by selecting it and then focusing on <strong>SELECTED "
#~ "TAB </strong>(more simpler is to double click the object name in the "
#~ "Project Tab), <strong>SELECTED TAB </strong>will be updated with the "
#~ "object properties according to it&#39;s kind: Gerber, Excellon, Geometry "
#~ "or CNCJob object.<br />\n"
#~ "\t<br />\n"
#~ "\tIf the selection of the object is done on the canvas by single click "
#~ "instead, and the <strong>SELECTED TAB</strong> is in focus, again the "
#~ "object properties will be displayed into the Selected Tab. Alternatively, "
#~ "double clicking on the object on the canvas will bring the "
#~ "<strong>SELECTED TAB</strong> and populate it even if it was out of focus."
#~ "<br />\n"
#~ "\t<br />\n"
#~ "\tYou can change the parameters in this screen and the flow direction is "
#~ "like this:<br />\n"
#~ "\t<br />\n"
#~ "\t<strong>Gerber/Excellon Object</strong> -&gt; Change Param -&gt; "
#~ "Generate Geometry -&gt;<strong> Geometry Object </strong>-&gt; Add tools "
#~ "(change param in Selected Tab) -&gt; Generate CNCJob -&gt;<strong> CNCJob "
#~ "Object </strong>-&gt; Verify GCode (through Edit CNC Code) and/or append/"
#~ "prepend to GCode (again, done in <strong>SELECTED TAB)&nbsp;</strong>-"
#~ "&gt; Save GCode</span></li>\n"
#~ "</ol>\n"
#~ "\n"
#~ "<p><span style=\"font-size:{fsize}px\">A list of key shortcuts is "
#~ "available through an menu entry in <strong>Help -&gt; Shortcuts List</"
#~ "strong>&nbsp;or through it&#39;s own key shortcut: <strong>F3</strong>.</"
#~ "span></p>\n"
#~ "\n"
#~ "        "

#~ msgid "Run Script ...\tShift+S"
#~ msgstr "Run Script ...\tShift+S"

#~| msgid ""
#~| "<font size=8><B>FlatCAM</B></font><BR>Version {version} {beta} ({date}) "
#~| "- {arch} <BR><BR>2D Computer-Aided Printed Circuit "
#~| "Board<BR>Manufacturing.<BR><BR>(c) 2014-2019 <B>Juan Pablo Caram</"
#~| "B><BR><BR><B> Main Contributors:</B><BR>Denis Hayrullin<BR>Kamil "
#~| "Sopko<BR>Marius Stanciu<BR>Matthieu Berthomé<BR>and many others found <a "
#~| "href = \"https://bitbucket.org/jpcgt/flatcam/pull-requests/?state=MERGED"
#~| "\">here.</a><BR><BR>Development is done <a href = \"https://bitbucket."
#~| "org/jpcgt/flatcam/src/Beta/\">here.</a><BR>DOWNLOAD area <a href = "
#~| "\"https://bitbucket.org/jpcgt/flatcam/downloads/\">here.</a><BR>"
#~ msgid ""
#~ "<font size=8><B>FlatCAM</B></font><BR>Version {version} {beta} ({date}) - "
#~ "{arch} <BR><BR>2D Computer-Aided Printed Circuit Board<BR>Manufacturing."
#~ "<BR><BR><B> License: </B><BR>Licensed under MIT license (2014 - "
#~ "2019)<BR>by (c)Juan Pablo Caram <BR><BR><B> Programmers:</B><BR>Denis "
#~ "Hayrullin<BR>Kamil Sopko<BR>Marius Stanciu<BR>Matthieu Berthomé<BR>and "
#~ "many others found <a href = \"https://bitbucket.org/jpcgt/flatcam/pull-"
#~ "requests/?state=MERGED\">here.</a><BR><BR><B>Development</B> is done <a "
#~ "href = \"https://bitbucket.org/jpcgt/flatcam/src/Beta/\">here.</"
#~ "a><BR><b>DOWNLOAD</B> area <a href = \"https://bitbucket.org/jpcgt/"
#~ "flatcam/downloads/\">here.</a><BR>"
#~ msgstr ""
#~ "<font size=8><B>FlatCAM</B></font><BR>Version {version} {beta} ({date}) - "
#~ "{arch} <BR><BR>2D Computer-Aided Printed Circuit Board<BR>Manufacturing."
#~ "<BR><BR><B> License: </B><BR>Licensed under MIT license (2014 - "
#~ "2019)<BR>by (c)Juan Pablo Caram <BR><BR><B> Programmers:</B><BR>Denis "
#~ "Hayrullin<BR>Kamil Sopko<BR>Marius Stanciu<BR>Matthieu Berthomé<BR>and "
#~ "many others found <a href = \"https://bitbucket.org/jpcgt/flatcam/pull-"
#~ "requests/?state=MERGED\">here.</a><BR><BR><B>Development</B> is done <a "
#~ "href = \"https://bitbucket.org/jpcgt/flatcam/src/Beta/\">here.</"
#~ "a><BR><b>DOWNLOAD</B> area <a href = \"https://bitbucket.org/jpcgt/"
#~ "flatcam/downloads/\">here.</a><BR>"

#~| msgid "[ERROR_NOTCL] Expected a GeometryObject, got %s"
#~ msgid "Expected a GeometryObject, got %s"
#~ msgstr "Expected a GeometryObject, got %s"

#~ msgid "Saved to: %s"
#~ msgstr "Saved to: %s"

#~ msgid "[WARNING_NOTCL] Adding Tool cancelled ..."
#~ msgstr "[WARNING_NOTCL] Adding Tool cancelled ..."

#~ msgid "%s"
#~ msgstr "%s"

#~| msgid "[ERROR]App.on_view_source() -->%s"
#~ msgid "App.on_view_source() -->"
#~ msgstr "App.on_view_source() -->"

#~ msgid "[success] Name changed from {old} to {new}"
#~ msgstr "[success] Name changed from {old} to {new}"

#~| msgid ""
#~| "[ERROR_NOTCL] Failed.\n"
#~| "%s"
#~ msgid "[ERROR_NOTCL] %s"
#~ msgstr "[ERROR_NOTCL] %s"

#~ msgid "Editor %s"
#~ msgstr "Editor %s"

#~ msgid "[success] Done. Path completed."
#~ msgstr "[success] Done. Path completed."

#~ msgid "[success] Paint done."
#~ msgstr "[success] Paint done."

#~| msgid ""
#~| "<b>General Shortcut list</b><br>\n"
#~| "            <table border=\"0\" cellpadding=\"0\" cellspacing=\"0\" "
#~| "style=\"width:283px\">\n"
#~| "                <tbody>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\" width=\"89\"><strong>F3</"
#~| "strong></td>\n"
#~| "                        <td width=\"194\"><span style=\"color:"
#~| "#006400\"><strong>&nbsp;SHOW SHORTCUT LIST</strong></span></td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\">&nbsp;</td>\n"
#~| "                        <td>&nbsp;</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>1</strong></td>\n"
#~| "                        <td>&nbsp;Switch to Project Tab</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>2</strong></td>\n"
#~| "                        <td>&nbsp;Switch to Selected Tab</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>3</strong></td>\n"
#~| "                        <td>&nbsp;Switch to Tool Tab</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\">&nbsp;</td>\n"
#~| "                        <td>&nbsp;</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>B</strong></td>\n"
#~| "                        <td>&nbsp;New Gerber</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>E</strong></td>\n"
#~| "                        <td>&nbsp;Edit Object (if selected)</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>G</strong></td>\n"
#~| "                        <td>&nbsp;Grid On/Off</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>J</strong></td>\n"
#~| "                        <td>&nbsp;Jump to Coordinates</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>L</strong></td>\n"
#~| "                        <td>&nbsp;New Excellon</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>M</strong></td>\n"
#~| "                        <td>&nbsp;Move Obj</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>N</strong></td>\n"
#~| "                        <td>&nbsp;New Geometry</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>O</strong></td>\n"
#~| "                        <td>&nbsp;Set Origin</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>Q</strong></td>\n"
#~| "                        <td>&nbsp;Change Units</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>P</strong></td>\n"
#~| "                        <td>&nbsp;Open Properties Tool</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>R</strong></td>\n"
#~| "                        <td>&nbsp;Rotate by 90 degree CW</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>S</strong></td>\n"
#~| "                        <td>&nbsp;Shell Toggle</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>T</strong></td>\n"
#~| "                        <td>&nbsp;Add a Tool (when in Geometry Selected "
#~| "Tab or in Tools NCC or Tools Paint)</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>V</strong></td>\n"
#~| "                        <td>&nbsp;Zoom Fit</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>X</strong></td>\n"
#~| "                        <td>&nbsp;Flip on X_axis</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>Y</strong></td>\n"
#~| "                        <td>&nbsp;Flip on Y_axis</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>&#39;-&#39;</strong></"
#~| "td>\n"
#~| "                        <td>&nbsp;Zoom Out</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>&#39;=&#39;</strong></"
#~| "td>\n"
#~| "                        <td>&nbsp;Zoom In</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\">&nbsp;</td>\n"
#~| "                        <td>&nbsp;</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>Ctrl+A</strong></td>\n"
#~| "                        <td>&nbsp;Select All</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>Ctrl+C</strong></td>\n"
#~| "                        <td>&nbsp;Copy Obj</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>Ctrl+E</strong></td>\n"
#~| "                        <td>&nbsp;Open Excellon File</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>Ctrl+G</strong></td>\n"
#~| "                        <td>&nbsp;Open Gerber File</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>Ctrl+N</strong></td>\n"
#~| "                        <td>&nbsp;New Project</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>Ctrl+M</strong></td>\n"
#~| "                        <td>&nbsp;Measurement Tool</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>Ctrl+O</strong></td>\n"
#~| "                        <td>&nbsp;Open Project</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>Ctrl+S</strong></td>\n"
#~| "                        <td>&nbsp;Save Project As</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>Ctrl+F10</strong></"
#~| "td>\n"
#~| "                        <td>&nbsp;Toggle Plot Area</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\">&nbsp;</td>\n"
#~| "                        <td>&nbsp;</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>Shift+C</strong></td>\n"
#~| "                        <td>&nbsp;Copy Obj_Name</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>Shift+E</strong></td>\n"
#~| "                        <td>&nbsp;Toggle Code Editor</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>Shift+G</strong></td>\n"
#~| "                        <td>&nbsp;Toggle the axis</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>Shift+P</strong></td>\n"
#~| "                        <td>&nbsp;Open Preferences Window</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>Shift+R</strong></td>\n"
#~| "                        <td>&nbsp;Rotate by 90 degree CCW</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>Shift+S</strong></td>\n"
#~| "                        <td>&nbsp;Run a Script</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>Shift+W</strong></td>\n"
#~| "                        <td>&nbsp;Toggle the workspace</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>Shift+X</strong></td>\n"
#~| "                        <td>&nbsp;Skew on X axis</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>Shift+Y</strong></td>\n"
#~| "                        <td>&nbsp;Skew on Y axis</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\">&nbsp;</td>\n"
#~| "                        <td>&nbsp;</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>Alt+C</strong></td>\n"
#~| "                        <td>&nbsp;Calculators Tool</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>Alt+D</strong></td>\n"
#~| "                        <td>&nbsp;2-Sided PCB Tool</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>Alt+K</strong></td>\n"
#~| "                        <td>&nbsp;Solder Paste Dispensing Tool</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>Alt+L</strong></td>\n"
#~| "                        <td>&nbsp;Film PCB Tool</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>Alt+N</strong></td>\n"
#~| "                        <td>&nbsp;Non-Copper Clearing Tool</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>Alt+P</strong></td>\n"
#~| "                        <td>&nbsp;Paint Area Tool</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>Alt+Q</strong></td>\n"
#~| "                        <td>&nbsp;PDF Import Tool</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>Alt+R</strong></td>\n"
#~| "                        <td>&nbsp;Transformations Tool</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>Alt+S</strong></td>\n"
#~| "                        <td>&nbsp;View File Source</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>Alt+U</strong></td>\n"
#~| "                        <td>&nbsp;Cutout PCB Tool</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>Alt+1</strong></td>\n"
#~| "                        <td>&nbsp;Enable all Plots</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>Alt+2</strong></td>\n"
#~| "                        <td>&nbsp;Disable all Plots</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>Alt+3</strong></td>\n"
#~| "                        <td>&nbsp;Disable Non-selected Plots</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>Alt+F10</strong></td>\n"
#~| "                        <td>&nbsp;Toggle Full Screen</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\">&nbsp;</td>\n"
#~| "                        <td>&nbsp;</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>F1</strong></td>\n"
#~| "                        <td>&nbsp;Open Online Manual</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>F4</strong></td>\n"
#~| "                        <td>&nbsp;Open Online Tutorials</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>Del</strong></td>\n"
#~| "                        <td>&nbsp;Delete Object</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>Del</strong></td>\n"
#~| "                        <td>&nbsp;Alternate: Delete Tool</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>'`'</strong></td>\n"
#~| "                        <td>&nbsp;(left to Key_1)Toogle Notebook Area "
#~| "(Left Side)</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>SPACE</strong></td>\n"
#~| "                        <td>&nbsp;En(Dis)able Obj Plot</td>\n"
#~| "                    </tr>\n"
#~| "                    <tr height=\"20\">\n"
#~| "                        <td height=\"20\"><strong>Escape</strong></td>\n"
#~| "                        <td>&nbsp;Deselects all objects</td>\n"
#~| "                    </tr>\n"
#~| "                </tbody>\n"
#~| "            </table>\n"
#~| "    \n"
#~| "            "
#~ msgid ""
#~ "<b>General Shortcut list</b><br>\n"
#~ "            <table border=\"0\" cellpadding=\"0\" cellspacing=\"0\" style="
#~ "\"width:283px\">\n"
#~ "                <tbody>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\" width=\"89\"><strong>F3</"
#~ "strong></td>\n"
#~ "                        <td width=\"194\"><span style=\"color:"
#~ "#006400\"><strong>&nbsp;SHOW SHORTCUT LIST</strong></span></td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>1</strong></td>\n"
#~ "                        <td>&nbsp;Switch to Project Tab</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>2</strong></td>\n"
#~ "                        <td>&nbsp;Switch to Selected Tab</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>3</strong></td>\n"
#~ "                        <td>&nbsp;Switch to Tool Tab</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>B</strong></td>\n"
#~ "                        <td>&nbsp;New Gerber</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>E</strong></td>\n"
#~ "                        <td>&nbsp;Edit Object (if selected)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>G</strong></td>\n"
#~ "                        <td>&nbsp;Grid On/Off</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>J</strong></td>\n"
#~ "                        <td>&nbsp;Jump to Coordinates</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>L</strong></td>\n"
#~ "                        <td>&nbsp;New Excellon</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>M</strong></td>\n"
#~ "                        <td>&nbsp;Move Obj</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>N</strong></td>\n"
#~ "                        <td>&nbsp;New Geometry</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>O</strong></td>\n"
#~ "                        <td>&nbsp;Set Origin</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Q</strong></td>\n"
#~ "                        <td>&nbsp;Change Units</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>P</strong></td>\n"
#~ "                        <td>&nbsp;Open Properties Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>R</strong></td>\n"
#~ "                        <td>&nbsp;Rotate by 90 degree CW</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>S</strong></td>\n"
#~ "                        <td>&nbsp;Shell Toggle</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>T</strong></td>\n"
#~ "                        <td>&nbsp;Add a Tool (when in Geometry Selected "
#~ "Tab or in Tools NCC or Tools Paint)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>V</strong></td>\n"
#~ "                        <td>&nbsp;Zoom Fit</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>X</strong></td>\n"
#~ "                        <td>&nbsp;Flip on X_axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Y</strong></td>\n"
#~ "                        <td>&nbsp;Flip on Y_axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>&#39;-&#39;</strong></"
#~ "td>\n"
#~ "                        <td>&nbsp;Zoom Out</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>&#39;=&#39;</strong></"
#~ "td>\n"
#~ "                        <td>&nbsp;Zoom In</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Ctrl+A</strong></td>\n"
#~ "                        <td>&nbsp;Select All</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Ctrl+C</strong></td>\n"
#~ "                        <td>&nbsp;Copy Obj</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Ctrl+E</strong></td>\n"
#~ "                        <td>&nbsp;Open Excellon File</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Ctrl+G</strong></td>\n"
#~ "                        <td>&nbsp;Open Gerber File</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Ctrl+N</strong></td>\n"
#~ "                        <td>&nbsp;New Project</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Ctrl+M</strong></td>\n"
#~ "                        <td>&nbsp;Measurement Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Ctrl+O</strong></td>\n"
#~ "                        <td>&nbsp;Open Project</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Ctrl+S</strong></td>\n"
#~ "                        <td>&nbsp;Save Project As</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Ctrl+F10</strong></td>\n"
#~ "                        <td>&nbsp;Toggle Plot Area</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Shift+C</strong></td>\n"
#~ "                        <td>&nbsp;Copy Obj_Name</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Shift+E</strong></td>\n"
#~ "                        <td>&nbsp;Toggle Code Editor</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Shift+G</strong></td>\n"
#~ "                        <td>&nbsp;Toggle the axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Shift+P</strong></td>\n"
#~ "                        <td>&nbsp;Open Preferences Window</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Shift+R</strong></td>\n"
#~ "                        <td>&nbsp;Rotate by 90 degree CCW</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Shift+S</strong></td>\n"
#~ "                        <td>&nbsp;Run a Script</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Shift+W</strong></td>\n"
#~ "                        <td>&nbsp;Toggle the workspace</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Shift+X</strong></td>\n"
#~ "                        <td>&nbsp;Skew on X axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Shift+Y</strong></td>\n"
#~ "                        <td>&nbsp;Skew on Y axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Alt+C</strong></td>\n"
#~ "                        <td>&nbsp;Calculators Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Alt+D</strong></td>\n"
#~ "                        <td>&nbsp;2-Sided PCB Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Alt+K</strong></td>\n"
#~ "                        <td>&nbsp;Solder Paste Dispensing Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Alt+L</strong></td>\n"
#~ "                        <td>&nbsp;Film PCB Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Alt+N</strong></td>\n"
#~ "                        <td>&nbsp;Non-Copper Clearing Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Alt+P</strong></td>\n"
#~ "                        <td>&nbsp;Paint Area Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Alt+Q</strong></td>\n"
#~ "                        <td>&nbsp;PDF Import Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Alt+R</strong></td>\n"
#~ "                        <td>&nbsp;Transformations Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Alt+S</strong></td>\n"
#~ "                        <td>&nbsp;View File Source</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Alt+U</strong></td>\n"
#~ "                        <td>&nbsp;Cutout PCB Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Alt+1</strong></td>\n"
#~ "                        <td>&nbsp;Enable all Plots</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Alt+2</strong></td>\n"
#~ "                        <td>&nbsp;Disable all Plots</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Alt+3</strong></td>\n"
#~ "                        <td>&nbsp;Disable Non-selected Plots</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Alt+F10</strong></td>\n"
#~ "                        <td>&nbsp;Toggle Full Screen</td>\n"
#~ "                    </tr>                 \n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Ctrl+Alt+X</strong></"
#~ "td>\n"
#~ "                        <td>&nbsp;Abort current task (gracefully)</td>\n"
#~ "                    </tr>                    \n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>F1</strong></td>\n"
#~ "                        <td>&nbsp;Open Online Manual</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>F4</strong></td>\n"
#~ "                        <td>&nbsp;Open Online Tutorials</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Del</strong></td>\n"
#~ "                        <td>&nbsp;Delete Object</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Del</strong></td>\n"
#~ "                        <td>&nbsp;Alternate: Delete Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>'`'</strong></td>\n"
#~ "                        <td>&nbsp;(left to Key_1)Toogle Notebook Area "
#~ "(Left Side)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>SPACE</strong></td>\n"
#~ "                        <td>&nbsp;En(Dis)able Obj Plot</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Escape</strong></td>\n"
#~ "                        <td>&nbsp;Deselects all objects</td>\n"
#~ "                    </tr>\n"
#~ "                </tbody>\n"
#~ "            </table>\n"
#~ "    \n"
#~ "            "
#~ msgstr ""
#~ "<b>General Shortcut list</b><br>\n"
#~ "            <table border=\"0\" cellpadding=\"0\" cellspacing=\"0\" style="
#~ "\"width:283px\">\n"
#~ "                <tbody>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\" width=\"89\"><strong>F3</"
#~ "strong></td>\n"
#~ "                        <td width=\"194\"><span style=\"color:"
#~ "#006400\"><strong>&nbsp;SHOW SHORTCUT LIST</strong></span></td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>1</strong></td>\n"
#~ "                        <td>&nbsp;Switch to Project Tab</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>2</strong></td>\n"
#~ "                        <td>&nbsp;Switch to Selected Tab</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>3</strong></td>\n"
#~ "                        <td>&nbsp;Switch to Tool Tab</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>B</strong></td>\n"
#~ "                        <td>&nbsp;New Gerber</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>E</strong></td>\n"
#~ "                        <td>&nbsp;Edit Object (if selected)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>G</strong></td>\n"
#~ "                        <td>&nbsp;Grid On/Off</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>J</strong></td>\n"
#~ "                        <td>&nbsp;Jump to Coordinates</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>L</strong></td>\n"
#~ "                        <td>&nbsp;New Excellon</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>M</strong></td>\n"
#~ "                        <td>&nbsp;Move Obj</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>N</strong></td>\n"
#~ "                        <td>&nbsp;New Geometry</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>O</strong></td>\n"
#~ "                        <td>&nbsp;Set Origin</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Q</strong></td>\n"
#~ "                        <td>&nbsp;Change Units</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>P</strong></td>\n"
#~ "                        <td>&nbsp;Open Properties Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>R</strong></td>\n"
#~ "                        <td>&nbsp;Rotate by 90 degree CW</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>S</strong></td>\n"
#~ "                        <td>&nbsp;Shell Toggle</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>T</strong></td>\n"
#~ "                        <td>&nbsp;Add a Tool (when in Geometry Selected "
#~ "Tab or in Tools NCC or Tools Paint)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>V</strong></td>\n"
#~ "                        <td>&nbsp;Zoom Fit</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>X</strong></td>\n"
#~ "                        <td>&nbsp;Flip on X_axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Y</strong></td>\n"
#~ "                        <td>&nbsp;Flip on Y_axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>&#39;-&#39;</strong></"
#~ "td>\n"
#~ "                        <td>&nbsp;Zoom Out</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>&#39;=&#39;</strong></"
#~ "td>\n"
#~ "                        <td>&nbsp;Zoom In</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Ctrl+A</strong></td>\n"
#~ "                        <td>&nbsp;Select All</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Ctrl+C</strong></td>\n"
#~ "                        <td>&nbsp;Copy Obj</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Ctrl+E</strong></td>\n"
#~ "                        <td>&nbsp;Open Excellon File</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Ctrl+G</strong></td>\n"
#~ "                        <td>&nbsp;Open Gerber File</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Ctrl+N</strong></td>\n"
#~ "                        <td>&nbsp;New Project</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Ctrl+M</strong></td>\n"
#~ "                        <td>&nbsp;Measurement Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Ctrl+O</strong></td>\n"
#~ "                        <td>&nbsp;Open Project</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Ctrl+S</strong></td>\n"
#~ "                        <td>&nbsp;Save Project As</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Ctrl+F10</strong></td>\n"
#~ "                        <td>&nbsp;Toggle Plot Area</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Shift+C</strong></td>\n"
#~ "                        <td>&nbsp;Copy Obj_Name</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Shift+E</strong></td>\n"
#~ "                        <td>&nbsp;Toggle Code Editor</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Shift+G</strong></td>\n"
#~ "                        <td>&nbsp;Toggle the axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Shift+P</strong></td>\n"
#~ "                        <td>&nbsp;Open Preferences Window</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Shift+R</strong></td>\n"
#~ "                        <td>&nbsp;Rotate by 90 degree CCW</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Shift+S</strong></td>\n"
#~ "                        <td>&nbsp;Run a Script</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Shift+W</strong></td>\n"
#~ "                        <td>&nbsp;Toggle the workspace</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Shift+X</strong></td>\n"
#~ "                        <td>&nbsp;Skew on X axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Shift+Y</strong></td>\n"
#~ "                        <td>&nbsp;Skew on Y axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Alt+C</strong></td>\n"
#~ "                        <td>&nbsp;Calculators Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Alt+D</strong></td>\n"
#~ "                        <td>&nbsp;2-Sided PCB Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Alt+K</strong></td>\n"
#~ "                        <td>&nbsp;Solder Paste Dispensing Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Alt+L</strong></td>\n"
#~ "                        <td>&nbsp;Film PCB Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Alt+N</strong></td>\n"
#~ "                        <td>&nbsp;Non-Copper Clearing Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Alt+P</strong></td>\n"
#~ "                        <td>&nbsp;Paint Area Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Alt+Q</strong></td>\n"
#~ "                        <td>&nbsp;PDF Import Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Alt+R</strong></td>\n"
#~ "                        <td>&nbsp;Transformations Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Alt+S</strong></td>\n"
#~ "                        <td>&nbsp;View File Source</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Alt+U</strong></td>\n"
#~ "                        <td>&nbsp;Cutout PCB Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Alt+1</strong></td>\n"
#~ "                        <td>&nbsp;Enable all Plots</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Alt+2</strong></td>\n"
#~ "                        <td>&nbsp;Disable all Plots</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Alt+3</strong></td>\n"
#~ "                        <td>&nbsp;Disable Non-selected Plots</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Alt+F10</strong></td>\n"
#~ "                        <td>&nbsp;Toggle Full Screen</td>\n"
#~ "                    </tr>                 \n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Ctrl+Alt+X</strong></"
#~ "td>\n"
#~ "                        <td>&nbsp;Abort current task (gracefully)</td>\n"
#~ "                    </tr>                    \n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>F1</strong></td>\n"
#~ "                        <td>&nbsp;Open Online Manual</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>F4</strong></td>\n"
#~ "                        <td>&nbsp;Open Online Tutorials</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Del</strong></td>\n"
#~ "                        <td>&nbsp;Delete Object</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Del</strong></td>\n"
#~ "                        <td>&nbsp;Alternate: Delete Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>'`'</strong></td>\n"
#~ "                        <td>&nbsp;(left to Key_1)Toogle Notebook Area "
#~ "(Left Side)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>SPACE</strong></td>\n"
#~ "                        <td>&nbsp;En(Dis)able Obj Plot</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Escape</strong></td>\n"
#~ "                        <td>&nbsp;Deselects all objects</td>\n"
#~ "                    </tr>\n"
#~ "                </tbody>\n"
#~ "            </table>\n"
#~ "    \n"
#~ "            "

#~ msgid ""
#~ "<b>Editor Shortcut list</b><br>\n"
#~ "            <br>\n"
#~ "            <strong><span style=\"color:#0000ff\">GEOMETRY EDITOR</span></"
#~ "strong><br>\n"
#~ "    \n"
#~ "            <table border=\"0\" cellpadding=\"0\" cellspacing=\"0\" style="
#~ "\"width:283px\">\n"
#~ "                <tbody>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\" width=\"89\"><strong>A</"
#~ "strong></td>\n"
#~ "                        <td width=\"194\">&nbsp;Draw an Arc</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>B</strong></td>\n"
#~ "                        <td>&nbsp;Buffer Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>C</strong></td>\n"
#~ "                        <td>&nbsp;Copy Geo Item</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>D</strong></td>\n"
#~ "                        <td>&nbsp;Within Add Arc will toogle the ARC "
#~ "direction: CW or CCW</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>E</strong></td>\n"
#~ "                        <td>&nbsp;Polygon Intersection Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>I</strong></td>\n"
#~ "                        <td>&nbsp;Paint Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>J</strong></td>\n"
#~ "                        <td>&nbsp;Jump to Location (x, y)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>K</strong></td>\n"
#~ "                        <td>&nbsp;Toggle Corner Snap</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>M</strong></td>\n"
#~ "                        <td>&nbsp;Move Geo Item</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>M</strong></td>\n"
#~ "                        <td>&nbsp;Within Add Arc will cycle through the "
#~ "ARC modes</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>N</strong></td>\n"
#~ "                        <td>&nbsp;Draw a Polygon</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>O</strong></td>\n"
#~ "                        <td>&nbsp;Draw a Circle</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>P</strong></td>\n"
#~ "                        <td>&nbsp;Draw a Path</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>R</strong></td>\n"
#~ "                        <td>&nbsp;Draw Rectangle</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>S</strong></td>\n"
#~ "                        <td>&nbsp;Polygon Substraction Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>T</strong></td>\n"
#~ "                        <td>&nbsp;Add Text Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>U</strong></td>\n"
#~ "                        <td>&nbsp;Polygon Union Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>X</strong></td>\n"
#~ "                        <td>&nbsp;Flip shape on X axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Y</strong></td>\n"
#~ "                        <td>&nbsp;Flip shape on Y axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Shift+X</strong></td>\n"
#~ "                        <td>&nbsp;Skew shape on X axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Shift+Y</strong></td>\n"
#~ "                        <td>&nbsp;Skew shape on Y axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Alt+R</strong></td>\n"
#~ "                        <td>&nbsp;Editor Transformation Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Alt+X</strong></td>\n"
#~ "                        <td>&nbsp;Offset shape on X axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Alt+Y</strong></td>\n"
#~ "                        <td>&nbsp;Offset shape on Y axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Ctrl+M</strong></td>\n"
#~ "                        <td>&nbsp;Measurement Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Ctrl+S</strong></td>\n"
#~ "                        <td>&nbsp;Save Object and Exit Editor</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Ctrl+X</strong></td>\n"
#~ "                        <td>&nbsp;Polygon Cut Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Space</strong></td>\n"
#~ "                        <td>&nbsp;Rotate Geometry</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ENTER</strong></td>\n"
#~ "                        <td>&nbsp;Finish drawing for certain tools</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ESC</strong></td>\n"
#~ "                        <td>&nbsp;Abort and return to Select</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Del</strong></td>\n"
#~ "                        <td>&nbsp;Delete Shape</td>\n"
#~ "                    </tr>\n"
#~ "                </tbody>\n"
#~ "            </table>\n"
#~ "            <br>\n"
#~ "            <br>\n"
#~ "            <strong><span style=\"color:#ff0000\">EXCELLON EDITOR</span></"
#~ "strong><br>\n"
#~ "            <table border=\"0\" cellpadding=\"0\" cellspacing=\"0\" style="
#~ "\"width:283px\">\n"
#~ "                <tbody>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\" width=\"89\"><strong>A</"
#~ "strong></td>\n"
#~ "                        <td width=\"194\">&nbsp;Add Drill Array</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>C</strong></td>\n"
#~ "                        <td>&nbsp;Copy Drill(s)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>D</strong></td>\n"
#~ "                        <td>&nbsp;Add Drill</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>J</strong></td>\n"
#~ "                        <td>&nbsp;Jump to Location (x, y)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>M</strong></td>\n"
#~ "                        <td>&nbsp;Move Drill(s)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\" width=\"89\"><strong>Q</"
#~ "strong></td>\n"
#~ "                        <td width=\"194\">&nbsp;Add Slot Array</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>R</strong></td>\n"
#~ "                        <td>&nbsp;Resize Drill(s)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>T</strong></td>\n"
#~ "                        <td>&nbsp;Add a new Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\" width=\"89\"><strong>W</"
#~ "strong></td>\n"
#~ "                        <td width=\"194\">&nbsp;Add Slot</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Del</strong></td>\n"
#~ "                        <td>&nbsp;Delete Drill(s)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Del</strong></td>\n"
#~ "                        <td>&nbsp;Alternate: Delete Tool(s)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ESC</strong></td>\n"
#~ "                        <td>&nbsp;Abort and return to Select</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Ctrl+S</strong></td>\n"
#~ "                        <td>&nbsp;Save Object and Exit Editor</td>\n"
#~ "                    </tr>\n"
#~ "                </tbody>\n"
#~ "            </table>\n"
#~ "            <br>\n"
#~ "            <br>\n"
#~ "            <strong><span style=\"color:#00ff00\">GERBER EDITOR</span></"
#~ "strong><br>\n"
#~ "            <table border=\"0\" cellpadding=\"0\" cellspacing=\"0\" style="
#~ "\"width:283px\">\n"
#~ "                <tbody>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\" width=\"89\"><strong>A</"
#~ "strong></td>\n"
#~ "                        <td width=\"194\">&nbsp;Add Pad Array</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>B</strong></td>\n"
#~ "                        <td>&nbsp;Buffer</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>C</strong></td>\n"
#~ "                        <td>&nbsp;Copy</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>D</strong></td>\n"
#~ "                        <td>&nbsp;Add Disc</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>E</strong></td>\n"
#~ "                        <td>&nbsp;Add SemiDisc</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>J</strong></td>\n"
#~ "                        <td>&nbsp;Jump to Location (x, y)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>M</strong></td>\n"
#~ "                        <td>&nbsp;Move</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>N</strong></td>\n"
#~ "                        <td>&nbsp;Add Region</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>P</strong></td>\n"
#~ "                        <td>&nbsp;Add Pad</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>R</strong></td>\n"
#~ "                        <td>&nbsp;Within Track & Region Tools will cycle "
#~ "in REVERSE the bend modes</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>S</strong></td>\n"
#~ "                        <td>&nbsp;Scale</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>T</strong></td>\n"
#~ "                        <td>&nbsp;Add Track</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>T</strong></td>\n"
#~ "                        <td>&nbsp;Within Track & Region Tools will cycle "
#~ "FORWARD the bend modes</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Del</strong></td>\n"
#~ "                        <td>&nbsp;Delete</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Del</strong></td>\n"
#~ "                        <td>&nbsp;Alternate: Delete Apertures</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ESC</strong></td>\n"
#~ "                        <td>&nbsp;Abort and return to Select</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Ctrl+E</strong></td>\n"
#~ "                        <td>&nbsp;Eraser Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Ctrl+S</strong></td>\n"
#~ "                        <td>&nbsp;Save Object and Exit Editor</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                     <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Alt+A</strong></td>\n"
#~ "                        <td>&nbsp;Mark Area Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Alt+N</strong></td>\n"
#~ "                        <td>&nbsp;Poligonize Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Alt+R</strong></td>\n"
#~ "                        <td>&nbsp;Transformation Tool</td>\n"
#~ "                    </tr>\n"
#~ "                </tbody>\n"
#~ "            </table>\n"
#~ "                    "
#~ msgstr ""
#~ "<b>Editor Shortcut list</b><br>\n"
#~ "            <br>\n"
#~ "            <strong><span style=\"color:#0000ff\">GEOMETRY EDITOR</span></"
#~ "strong><br>\n"
#~ "    \n"
#~ "            <table border=\"0\" cellpadding=\"0\" cellspacing=\"0\" style="
#~ "\"width:283px\">\n"
#~ "                <tbody>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\" width=\"89\"><strong>A</"
#~ "strong></td>\n"
#~ "                        <td width=\"194\">&nbsp;Draw an Arc</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>B</strong></td>\n"
#~ "                        <td>&nbsp;Buffer Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>C</strong></td>\n"
#~ "                        <td>&nbsp;Copy Geo Item</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>D</strong></td>\n"
#~ "                        <td>&nbsp;Within Add Arc will toogle the ARC "
#~ "direction: CW or CCW</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>E</strong></td>\n"
#~ "                        <td>&nbsp;Polygon Intersection Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>I</strong></td>\n"
#~ "                        <td>&nbsp;Paint Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>J</strong></td>\n"
#~ "                        <td>&nbsp;Jump to Location (x, y)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>K</strong></td>\n"
#~ "                        <td>&nbsp;Toggle Corner Snap</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>M</strong></td>\n"
#~ "                        <td>&nbsp;Move Geo Item</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>M</strong></td>\n"
#~ "                        <td>&nbsp;Within Add Arc will cycle through the "
#~ "ARC modes</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>N</strong></td>\n"
#~ "                        <td>&nbsp;Draw a Polygon</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>O</strong></td>\n"
#~ "                        <td>&nbsp;Draw a Circle</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>P</strong></td>\n"
#~ "                        <td>&nbsp;Draw a Path</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>R</strong></td>\n"
#~ "                        <td>&nbsp;Draw Rectangle</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>S</strong></td>\n"
#~ "                        <td>&nbsp;Polygon Substraction Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>T</strong></td>\n"
#~ "                        <td>&nbsp;Add Text Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>U</strong></td>\n"
#~ "                        <td>&nbsp;Polygon Union Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>X</strong></td>\n"
#~ "                        <td>&nbsp;Flip shape on X axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Y</strong></td>\n"
#~ "                        <td>&nbsp;Flip shape on Y axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Shift+X</strong></td>\n"
#~ "                        <td>&nbsp;Skew shape on X axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Shift+Y</strong></td>\n"
#~ "                        <td>&nbsp;Skew shape on Y axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Alt+R</strong></td>\n"
#~ "                        <td>&nbsp;Editor Transformation Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Alt+X</strong></td>\n"
#~ "                        <td>&nbsp;Offset shape on X axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Alt+Y</strong></td>\n"
#~ "                        <td>&nbsp;Offset shape on Y axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Ctrl+M</strong></td>\n"
#~ "                        <td>&nbsp;Measurement Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Ctrl+S</strong></td>\n"
#~ "                        <td>&nbsp;Save Object and Exit Editor</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Ctrl+X</strong></td>\n"
#~ "                        <td>&nbsp;Polygon Cut Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Space</strong></td>\n"
#~ "                        <td>&nbsp;Rotate Geometry</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ENTER</strong></td>\n"
#~ "                        <td>&nbsp;Finish drawing for certain tools</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ESC</strong></td>\n"
#~ "                        <td>&nbsp;Abort and return to Select</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Del</strong></td>\n"
#~ "                        <td>&nbsp;Delete Shape</td>\n"
#~ "                    </tr>\n"
#~ "                </tbody>\n"
#~ "            </table>\n"
#~ "            <br>\n"
#~ "            <br>\n"
#~ "            <strong><span style=\"color:#ff0000\">EXCELLON EDITOR</span></"
#~ "strong><br>\n"
#~ "            <table border=\"0\" cellpadding=\"0\" cellspacing=\"0\" style="
#~ "\"width:283px\">\n"
#~ "                <tbody>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\" width=\"89\"><strong>A</"
#~ "strong></td>\n"
#~ "                        <td width=\"194\">&nbsp;Add Drill Array</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>C</strong></td>\n"
#~ "                        <td>&nbsp;Copy Drill(s)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>D</strong></td>\n"
#~ "                        <td>&nbsp;Add Drill</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>J</strong></td>\n"
#~ "                        <td>&nbsp;Jump to Location (x, y)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>M</strong></td>\n"
#~ "                        <td>&nbsp;Move Drill(s)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\" width=\"89\"><strong>Q</"
#~ "strong></td>\n"
#~ "                        <td width=\"194\">&nbsp;Add Slot Array</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>R</strong></td>\n"
#~ "                        <td>&nbsp;Resize Drill(s)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>T</strong></td>\n"
#~ "                        <td>&nbsp;Add a new Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\" width=\"89\"><strong>W</"
#~ "strong></td>\n"
#~ "                        <td width=\"194\">&nbsp;Add Slot</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Del</strong></td>\n"
#~ "                        <td>&nbsp;Delete Drill(s)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Del</strong></td>\n"
#~ "                        <td>&nbsp;Alternate: Delete Tool(s)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ESC</strong></td>\n"
#~ "                        <td>&nbsp;Abort and return to Select</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Ctrl+S</strong></td>\n"
#~ "                        <td>&nbsp;Save Object and Exit Editor</td>\n"
#~ "                    </tr>\n"
#~ "                </tbody>\n"
#~ "            </table>\n"
#~ "            <br>\n"
#~ "            <br>\n"
#~ "            <strong><span style=\"color:#00ff00\">GERBER EDITOR</span></"
#~ "strong><br>\n"
#~ "            <table border=\"0\" cellpadding=\"0\" cellspacing=\"0\" style="
#~ "\"width:283px\">\n"
#~ "                <tbody>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\" width=\"89\"><strong>A</"
#~ "strong></td>\n"
#~ "                        <td width=\"194\">&nbsp;Add Pad Array</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>B</strong></td>\n"
#~ "                        <td>&nbsp;Buffer</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>C</strong></td>\n"
#~ "                        <td>&nbsp;Copy</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>D</strong></td>\n"
#~ "                        <td>&nbsp;Add Disc</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>E</strong></td>\n"
#~ "                        <td>&nbsp;Add SemiDisc</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>J</strong></td>\n"
#~ "                        <td>&nbsp;Jump to Location (x, y)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>M</strong></td>\n"
#~ "                        <td>&nbsp;Move</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>N</strong></td>\n"
#~ "                        <td>&nbsp;Add Region</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>P</strong></td>\n"
#~ "                        <td>&nbsp;Add Pad</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>R</strong></td>\n"
#~ "                        <td>&nbsp;Within Track & Region Tools will cycle "
#~ "in REVERSE the bend modes</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>S</strong></td>\n"
#~ "                        <td>&nbsp;Scale</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>T</strong></td>\n"
#~ "                        <td>&nbsp;Add Track</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>T</strong></td>\n"
#~ "                        <td>&nbsp;Within Track & Region Tools will cycle "
#~ "FORWARD the bend modes</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Del</strong></td>\n"
#~ "                        <td>&nbsp;Delete</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Del</strong></td>\n"
#~ "                        <td>&nbsp;Alternate: Delete Apertures</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ESC</strong></td>\n"
#~ "                        <td>&nbsp;Abort and return to Select</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Ctrl+E</strong></td>\n"
#~ "                        <td>&nbsp;Eraser Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Ctrl+S</strong></td>\n"
#~ "                        <td>&nbsp;Save Object and Exit Editor</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                     <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Alt+A</strong></td>\n"
#~ "                        <td>&nbsp;Mark Area Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Alt+N</strong></td>\n"
#~ "                        <td>&nbsp;Poligonize Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Alt+R</strong></td>\n"
#~ "                        <td>&nbsp;Transformation Tool</td>\n"
#~ "                    </tr>\n"
#~ "                </tbody>\n"
#~ "            </table>\n"
#~ "                    "

#~ msgid "[success] Done."
#~ msgstr "[success] Done."

#~ msgid "[WARNING_NOTCL] Cancelled."
#~ msgstr "[WARNING_NOTCL] Cancelled."

#~ msgid "[success] Added new tool with dia: {dia} {units}"
#~ msgstr "[success] Added new tool with dia: {dia} {units}"

#~ msgid "[WARNING_NOTCL] Application is saving the project. Please wait ..."
#~ msgstr "[WARNING_NOTCL] Application is saving the project. Please wait ..."

#~ msgid "<b>%s:</b>"
#~ msgstr "<b>%s:</b>"

#~ msgid "%s:"
#~ msgstr "%s:"

#~| msgid "[ERROR_NOTCL] Object not found: %s"
#~ msgid "Object not found: %s"
#~ msgstr "Object not found: %s"

#~ msgid "[success] Opened: %s"
#~ msgstr "[success] Opened: %s"

#~ msgid "[success] Paint All Done."
#~ msgstr "[success] Paint All Done."

#~| msgid ""
#~| "[ERROR] Could not do Paint All. Try a different combination of "
#~| "parameters. Or a different Method of paint\n"
#~| "%s"
#~ msgid ""
#~ "Could not do Paint All. Try a different combination of parameters. Or a "
#~ "different Method of paint\n"
#~ "%s"
#~ msgstr ""
#~ "Could not do Paint All. Try a different combination of parameters. Or a "
#~ "different Method of paint\n"
#~ "%s"

#~| msgid "[success] Paint All Done."
#~ msgid "[success] Paint Area Done."
#~ msgstr "[success] Paint Area Done."

#~ msgid "Generating panel ... Please wait."
#~ msgstr "Generating panel ... Please wait."

#~ msgid "...processing... [%s]"
#~ msgstr "...processing... [%s]"

#~ msgid "Parsing aperture %s geometry ..."
#~ msgstr "Parsing aperture %s geometry ..."

#~ msgid "[success] Skew on the %s axis done ..."
#~ msgstr "[success] Skew on the %s axis done ..."

#~ msgid "[ERROR_NOTCL] Could not load defaults file."
#~ msgstr "[ERROR_NOTCL] Could not load defaults file."

#~ msgid "[ERROR_NOTCL] Failed to parse defaults file."
#~ msgstr "[ERROR_NOTCL] Failed to parse defaults file."

#~ msgid "[ERROR_NOTCL] An internal error has ocurred. See shell.\n"
#~ msgstr "[ERROR_NOTCL] An internal error has ocurred. See shell.\n"

#~ msgid "[success] Defaults saved."
#~ msgstr "[success] Defaults saved."

#~ msgid "[success] Converted units to %s"
#~ msgstr "[success] Converted units to %s"

#~ msgid "[WARNING_NOTCL] Export Code cancelled."
#~ msgstr "[WARNING_NOTCL] Export Code cancelled."

#~ msgid "[success] Origin set ..."
#~ msgstr "[success] Origin set ..."

#~ msgid "[success] Skew on X axis done."
#~ msgstr "[success] Skew on X axis done."

#~ msgid "[success] Skew on Y axis done."
#~ msgstr "[success] Skew on Y axis done."

#~ msgid "[success] New Grid added ..."
#~ msgstr "[success] New Grid added ..."

#~ msgid "[WARNING_NOTCL] Open Gerber cancelled."
#~ msgstr "[WARNING_NOTCL] Open Gerber cancelled."

#~ msgid "[WARNING_NOTCL] Open G-Code cancelled."
#~ msgstr "[WARNING_NOTCL] Open G-Code cancelled."

#~ msgid "[WARNING_NOTCL] Open Project cancelled."
#~ msgstr "[WARNING_NOTCL] Open Project cancelled."

#~ msgid "[WARNING_NOTCL] Open Config cancelled."
#~ msgstr "[WARNING_NOTCL] Open Config cancelled."

#~ msgid "[WARNING_NOTCL] No object selected."
#~ msgstr "[WARNING_NOTCL] No object selected."

#~ msgid "[WARNING_NOTCL] Export SVG cancelled."
#~ msgstr "[WARNING_NOTCL] Export SVG cancelled."

#~ msgid "[WARNING_NOTCL] Export Excellon cancelled."
#~ msgstr "[WARNING_NOTCL] Export Excellon cancelled."

#~ msgid "[WARNING_NOTCL] Export Gerber cancelled."
#~ msgstr "[WARNING_NOTCL] Export Gerber cancelled."

#~ msgid "[WARNING_NOTCL] Export DXF cancelled."
#~ msgstr "[WARNING_NOTCL] Export DXF cancelled."

#~ msgid "[WARNING_NOTCL] Open SVG cancelled."
#~ msgstr "[WARNING_NOTCL] Open SVG cancelled."

#~ msgid "[WARNING_NOTCL] Open DXF cancelled."
#~ msgstr "[WARNING_NOTCL] Open DXF cancelled."

#~ msgid "[WARNING_NOTCL] No object Box. Using instead %s"
#~ msgstr "[WARNING_NOTCL] No object Box. Using instead %s"

#~ msgid "[ERROR_NOTCL] Failed to parse file: {name}. {error}"
#~ msgstr "[ERROR_NOTCL] Failed to parse file: {name}. {error}"

#~ msgid "[ERROR_NOTCL] An internal error has occurred. See shell.\n"
#~ msgstr "[ERROR_NOTCL] An internal error has occurred. See shell.\n"

#~ msgid "[ERROR_NOTCL] Failed to verify project file: %s. Retry to save it."
#~ msgstr "[ERROR_NOTCL] Failed to verify project file: %s. Retry to save it."

#~ msgid ""
#~ "[ERROR_NOTCL] Failed to parse saved project file: %s. Retry to save it."
#~ msgstr ""
#~ "[ERROR_NOTCL] Failed to parse saved project file: %s. Retry to save it."

#~ msgid "[ERROR_NOTCL] Failed to save project file: %s. Retry to save it."
#~ msgstr "[ERROR_NOTCL] Failed to save project file: %s. Retry to save it."

#~ msgid "[ERROR_NOTCL] Wrong value format entered, use a number."
#~ msgstr "[ERROR_NOTCL] Wrong value format entered, use a number."

#~ msgid "[ERROR_NOTCL] Cancelled. Empty file, it has no geometry..."
#~ msgstr "[ERROR_NOTCL] Cancelled. Empty file, it has no geometry..."

#~ msgid "[WARNING_NOTCL] Export Machine Code cancelled ..."
#~ msgstr "[WARNING_NOTCL] Export Machine Code cancelled ..."

#~ msgid "[WARNING_NOTCL] No such file or directory"
#~ msgstr "[WARNING_NOTCL] No such file or directory"

#~ msgid "[ERROR_NOTCL] The value is mistyped. Check the value. %s"
#~ msgstr "[ERROR_NOTCL] The value is mistyped. Check the value. %s"

#~ msgid "[ERROR_NOTCL] Cancelled."
#~ msgstr "[ERROR_NOTCL] Cancelled."

#~ msgid "Tool Dia:"
#~ msgstr "Tool Dia:"

#~ msgid "Nr of drills:"
#~ msgstr "Nr of drills:"

#~ msgid "Direction:"
#~ msgstr "Direction:"

#~ msgid "Pitch:"
#~ msgstr "Pitch:"

#~ msgid "Length:"
#~ msgstr "Length:"

#~ msgid "Nr of slots:"
#~ msgstr "Nr of slots:"

#~ msgid "[success] Deleted tool with dia: {del_dia} {units}"
#~ msgstr "[success] Deleted tool with dia: {del_dia} {units}"

#~ msgid "Tool dia:"
#~ msgstr "Tool dia:"

#~ msgid "Overlap Rate:"
#~ msgstr "Overlap Rate:"

#~ msgid "Method:"
#~ msgstr "Method:"

#~ msgid "[ERROR_NOTCL] Wrong value format entered for Rotate, use a number."
#~ msgstr "[ERROR_NOTCL] Wrong value format entered for Rotate, use a number."

#~ msgid "[ERROR_NOTCL] Wrong value format entered for Skew X, use a number."
#~ msgstr "[ERROR_NOTCL] Wrong value format entered for Skew X, use a number."

#~ msgid "[ERROR_NOTCL] Wrong value format entered for Skew Y, use a number."
#~ msgstr "[ERROR_NOTCL] Wrong value format entered for Skew Y, use a number."

#~ msgid "[ERROR_NOTCL] Wrong value format entered for Scale X, use a number."
#~ msgstr "[ERROR_NOTCL] Wrong value format entered for Scale X, use a number."

#~ msgid "[ERROR_NOTCL] Wrong value format entered for Scale Y, use a number."
#~ msgstr "[ERROR_NOTCL] Wrong value format entered for Scale Y, use a number."

#~ msgid "[ERROR_NOTCL] Wrong value format entered for Offset X, use a number."
#~ msgstr ""
#~ "[ERROR_NOTCL] Wrong value format entered for Offset X, use a number."

#~ msgid "[ERROR_NOTCL] Wrong value format entered for Offset Y, use a number."
#~ msgstr ""
#~ "[ERROR_NOTCL] Wrong value format entered for Offset Y, use a number."

#~ msgid "[success] Flip on the Y axis done ..."
#~ msgstr "[success] Flip on the Y axis done ..."

#~ msgid "[success] Flip on the X axis done ..."
#~ msgstr "[success] Flip on the X axis done ..."

#~ msgid "[success] Offset on the %s axis done ..."
#~ msgstr "[success] Offset on the %s axis done ..."

#~ msgid ""
#~ "[WARNING_NOTCL] Editing MultiGeo Geometry, tool: {tool} with diameter: "
#~ "{dia}"
#~ msgstr ""
#~ "[WARNING_NOTCL] Editing MultiGeo Geometry, tool: {tool} with diameter: "
#~ "{dia}"

#~ msgid "Clear GUI Settings:"
#~ msgstr "Clear GUI Settings:"

#~ msgid "Duration:"
#~ msgstr "Duration:"

#~ msgid "Fast Plunge:"
#~ msgstr "Fast Plunge:"

#~ msgid "Linear Dir.:"
#~ msgstr "Linear Dir.:"

#~ msgid "Plot kind:"
#~ msgstr "Plot kind:"

#~ msgid ""
#~ "Select from the Tools Table above\n"
#~ "the tools you want to include."
#~ msgstr ""
#~ "Select from the Tools Table above\n"
#~ "the tools you want to include."

#~ msgid ""
#~ "[WARNING_NOTCL] Tool Diameter is zero value. Change it to a positive real "
#~ "number."
#~ msgstr ""
#~ "[WARNING_NOTCL] Tool Diameter is zero value. Change it to a positive real "
#~ "number."

#~ msgid "[success] Gerber %s was mirrored..."
#~ msgstr "[success] Gerber %s was mirrored..."

#~ msgid "[success] Excellon %s was mirrored..."
#~ msgstr "[success] Excellon %s was mirrored..."

#~ msgid "[success] Geometry %s was mirrored..."
#~ msgstr "[success] Geometry %s was mirrored..."

#~ msgid "[WARNING_NOTCL] No object(s) selected."
#~ msgstr "[WARNING_NOTCL] No object(s) selected."

#~ msgid "[success] %s object was moved ..."
#~ msgstr "[success] %s object was moved ..."

#~ msgid "[WARNING_NOTCL] Object(s) not selected"
#~ msgstr "[WARNING_NOTCL] Object(s) not selected"

#~ msgid "[WARNING_NOTCL] Buffering ..."
#~ msgstr "[WARNING_NOTCL] Buffering ..."

#~ msgid "[success] Non-Copper Clearing with ToolDia = %s started."
#~ msgstr "[success] Non-Copper Clearing with ToolDia = %s started."

#~ msgid "[ERROR_NOTCL] NCCTool.clear_non_copper() --> %s"
#~ msgstr "[ERROR_NOTCL] NCCTool.clear_non_copper() --> %s"

#~ msgid "[success] NCC Tool finished."
#~ msgstr "[success] NCC Tool finished."

#~ msgid ""
#~ "[WARNING_NOTCL] NCC Tool finished but some PCB features could not be "
#~ "cleared. Check the result."
#~ msgstr ""
#~ "[WARNING_NOTCL] NCC Tool finished but some PCB features could not be "
#~ "cleared. Check the result."

#~ msgid "[success] Non-Copper Rest Clearing with ToolDia = %s started."
#~ msgstr "[success] Non-Copper Rest Clearing with ToolDia = %s started."

#~ msgid "[ERROR_NOTCL] NCCTool.clear_non_copper_rest() --> %s"
#~ msgstr "[ERROR_NOTCL] NCCTool.clear_non_copper_rest() --> %s"

#~ msgid ""
#~ "[ERROR_NOTCL] NCC Tool finished but could not clear the object with "
#~ "current settings."
#~ msgstr ""
#~ "[ERROR_NOTCL] NCC Tool finished but could not clear the object with "
#~ "current settings."

#~ msgid "[WARNING_NOTCL] Open PDF cancelled."
#~ msgstr "[WARNING_NOTCL] Open PDF cancelled."

#~ msgid "[ERROR_NOTCL] Open PDF file failed."
#~ msgstr "[ERROR_NOTCL] Open PDF file failed."

#~ msgid "[success] Rendered: %s"
#~ msgstr "[success] Rendered: %s"

#~ msgid ""
#~ "How to select the polygons to paint.<BR>Options:<BR>- <B>Single Polygons</"
#~ "B>: left mouse click on the polygon to be painted.<BR>- <B>Area "
#~ "Selection</B>: left mouse click to start selection of the area to be "
#~ "painted.<BR>- <B>All Polygons</B>: paint all polygons.<BR>- <B>Reference "
#~ "Object</B>: paint an area described by an external reference object."
#~ msgstr ""
#~ "How to select the polygons to paint.<BR>Options:<BR>- <B>Single Polygons</"
#~ "B>: left mouse click on the polygon to be painted.<BR>- <B>Area "
#~ "Selection</B>: left mouse click to start selection of the area to be "
#~ "painted.<BR>- <B>All Polygons</B>: paint all polygons.<BR>- <B>Reference "
#~ "Object</B>: paint an area described by an external reference object."

#~ msgid ""
#~ "[ERROR_NOTCL] There is no Painting Geometry in the file.\n"
#~ "Usually it means that the tool diameter is too big for the painted "
#~ "geometry.\n"
#~ "Change the painting parameters and try again."
#~ msgstr ""
#~ "[ERROR_NOTCL] There is no Painting Geometry in the file.\n"
#~ "Usually it means that the tool diameter is too big for the painted "
#~ "geometry.\n"
#~ "Change the painting parameters and try again."

#~ msgid "[WARNING_NOTCL]No object Box. Using instead %s"
#~ msgstr "[WARNING_NOTCL]No object Box. Using instead %s"

#~ msgid "[success] Imported: %s"
#~ msgstr "[success] Imported: %s"

#~ msgid "[ERROR_NOTCL] Generating new object failed."
#~ msgstr "[ERROR_NOTCL] Generating new object failed."

#~ msgid "[success] Created: %s"
#~ msgstr "[success] Created: %s"

#~ msgid "[success] Rotate done ..."
#~ msgstr "[success] Rotate done ..."

#~ msgid ""
#~ "When choosing the 'Itself' option the non copper clearing extent\n"
#~ "is based on the object that is copper cleared.\n"
#~ " Choosing the 'Box' option will do non copper clearing within the box\n"
#~ "specified by another object different than the one that is copper cleared."
#~ msgstr ""
#~ "When choosing the 'Itself' option the non copper clearing extent\n"
#~ "is based on the object that is copper cleared.\n"
#~ " Choosing the 'Box' option will do non copper clearing within the box\n"
#~ "specified by another object different than the one that is copper cleared."

#~ msgid ""
#~ "How to select the polygons to paint.<BR>Options:<BR>- <B>Single</B>: left "
#~ "mouse click on the polygon to be painted.<BR>- <B>Area</B>: left mouse "
#~ "click to start selection of the area to be painted.<BR>- <B>All</B>: "
#~ "paint all polygons.<BR>- <B>Ref</B>: paint an area described by an "
#~ "external reference object."
#~ msgstr ""
#~ "How to select the polygons to paint.<BR>Options:<BR>- <B>Single</B>: left "
#~ "mouse click on the polygon to be painted.<BR>- <B>Area</B>: left mouse "
#~ "click to start selection of the area to be painted.<BR>- <B>All</B>: "
#~ "paint all polygons.<BR>- <B>Ref</B>: paint an area described by an "
#~ "external reference object."

#~ msgid "Geometry object to be painted.                        "
#~ msgstr "Geometry object to be painted.                        "

#~ msgid ""
#~ "After clicking here, click inside<BR>the polygon you wish to be painted "
#~ "if <B>Single</B> is selected.<BR>If <B>Area</B> is selected, then the "
#~ "selection of the area to be painted<BR>will be initiated by a first click "
#~ "and finished by the second mouse click.<BR>If <B>All</B>  is selected "
#~ "then the Paint will start after click.<BR>If <B>Ref</B>  is selected then "
#~ "the Paint will start after click,<BR>and the painted area will be "
#~ "described by a selected object.<BR>A new Geometry object with the tool "
#~ "paths will be created."
#~ msgstr ""
#~ "After clicking here, click inside<BR>the polygon you wish to be painted "
#~ "if <B>Single</B> is selected.<BR>If <B>Area</B> is selected, then the "
#~ "selection of the area to be painted<BR>will be initiated by a first click "
#~ "and finished by the second mouse click.<BR>If <B>All</B>  is selected "
#~ "then the Paint will start after click.<BR>If <B>Ref</B>  is selected then "
#~ "the Paint will start after click,<BR>and the painted area will be "
#~ "described by a selected object.<BR>A new Geometry object with the tool "
#~ "paths will be created."

#~ msgid "<b>Apertures:</b>"
#~ msgstr "<b>Apertures:</b>"

#~ msgid "Aperture Code:"
#~ msgstr "Aperture Code:"

#~ msgid "<b>Languages:</b>"
#~ msgstr "<b>Languages:</b>"

#~ msgid "Width (# passes):"
#~ msgstr "Width (# passes):"

#~| msgid "<b>Clear non-copper:</b>"
#~ msgid "Clear non-copper"
#~ msgstr "Clear non-copper"

#~ msgid "Rounded corners"
#~ msgstr "Rounded corners"

#~ msgid ""
#~ "Creates a Geometry objects with polygons\n"
#~ "covering the copper-free areas of the PCB."
#~ msgstr ""
#~ "Creates a Geometry objects with polygons\n"
#~ "covering the copper-free areas of the PCB."

#~ msgid "<b>Bounding Box:</b>"
#~ msgstr "<b>Bounding Box:</b>"

#~ msgid "<b>Units</b>:"
#~ msgstr "<b>Units</b>:"

#~ msgid "<b>Zeros</b>:"
#~ msgstr "<b>Zeros</b>:"

#~ msgid "INCH:"
#~ msgstr "INCH:"

#~ msgid "Tool change:"
#~ msgstr "Tool change:"

#~ msgid "Toolchange Z position."
#~ msgstr "Toolchange Z position."

#~ msgid ""
#~ "Tool speed while drilling\n"
#~ "(in units per minute)."
#~ msgstr ""
#~ "Tool speed while drilling\n"
#~ "(in units per minute)."

#~ msgid "<b>Gcode:    </b>"
#~ msgstr "<b>Gcode:    </b>"

#~ msgid "Offset Z:"
#~ msgstr "Offset Z:"

#~ msgid "<b>Slots:</b>"
#~ msgstr "<b>Slots:</b>"

#~ msgid "<b>Create CNC Job:</b>"
#~ msgstr "<b>Create CNC Job:</b>"

#~ msgid "Multidepth"
#~ msgstr "Multidepth"

#~ msgid "Multidepth usage: True or False."
#~ msgstr "Multidepth usage: True or False."

#~ msgid ""
#~ "The preprocessor file that dictates\n"
#~ "Machine Code output."
#~ msgstr ""
#~ "The preprocessor file that dictates\n"
#~ "Machine Code output."

#~ msgid "Display Annotation:"
#~ msgstr "Display Annotation:"

#~ msgid ""
#~ "Type here any G-Code commands you would\n"
#~ "like to be executed when Toolchange event is encountered.\n"
#~ "This will constitute a Custom Toolchange GCode,\n"
#~ "or a Toolchange Macro."
#~ msgstr ""
#~ "Type here any G-Code commands you would\n"
#~ "like to be executed when Toolchange event is encountered.\n"
#~ "This will constitute a Custom Toolchange GCode,\n"
#~ "or a Toolchange Macro."

#~ msgid ""
#~ "If checked, use 'rest machining'.\n"
#~ "Basically it will clear copper outside PCB features,\n"
#~ "using the biggest tool and continue with the next tools,\n"
#~ "from bigger to smaller, to clear areas of copper that\n"
#~ "could not be cleared by previous tool.\n"
#~ "If not checked, use the standard algorithm."
#~ msgstr ""
#~ "If checked, use 'rest machining'.\n"
#~ "Basically it will clear copper outside PCB features,\n"
#~ "using the biggest tool and continue with the next tools,\n"
#~ "from bigger to smaller, to clear areas of copper that\n"
#~ "could not be cleared by previous tool.\n"
#~ "If not checked, use the standard algorithm."

#~ msgid "Offset:"
#~ msgstr "Offset:"

#~ msgid ""
#~ "Distance from objects at which\n"
#~ "to draw the cutout."
#~ msgstr ""
#~ "Distance from objects at which\n"
#~ "to draw the cutout."

#~ msgid ""
#~ "Size of the gaps in the toolpath\n"
#~ "that will remain to hold the\n"
#~ "board in place."
#~ msgstr ""
#~ "Size of the gaps in the toolpath\n"
#~ "that will remain to hold the\n"
#~ "board in place."

#~ msgid "Create a convex shape surrounding the entire PCB."
#~ msgstr "Create a convex shape surrounding the entire PCB."

#~ msgid ""
#~ "The axis should pass through a <b>point</b> or cut\n"
#~ " a specified <b>box</b> (in a Geometry object) in \n"
#~ "the middle."
#~ msgstr ""
#~ "The axis should pass through a <b>point</b> or cut\n"
#~ " a specified <b>box</b> (in a Geometry object) in \n"
#~ "the middle."

#~ msgid "Panel Type:"
#~ msgstr "Panel Type:"

#~ msgid "Tip angle:"
#~ msgstr "Tip angle:"

#~ msgid "Angle for rotation. In degrees."
#~ msgstr "Angle for rotation. In degrees."

#~ msgid "Angle for Skew/Shear on X axis. In degrees."
#~ msgstr "Angle for Skew/Shear on X axis. In degrees."

#~ msgid "Angle for Skew/Shear on Y axis. In degrees."
#~ msgstr "Angle for Skew/Shear on Y axis. In degrees."

#~ msgid "XY Toolchange:"
#~ msgstr "XY Toolchange:"

#~ msgid "PostProcessors:"
#~ msgstr "PostProcessors:"

#~ msgid "<b>Scale:</b>"
#~ msgstr "<b>Scale:</b>"

#~ msgid "<b>Offset:</b>"
#~ msgstr "<b>Offset:</b>"

#~ msgid "<b>Tools Table</b>"
#~ msgstr "<b>Tools Table</b>"

#~ msgid ""
#~ "Tool height just before starting the work.\n"
#~ "Delete the value if you don't need this feature."
#~ msgstr ""
#~ "Tool height just before starting the work.\n"
#~ "Delete the value if you don't need this feature."

#~ msgid ""
#~ "Z-axis position (height) for\n"
#~ "the last move."
#~ msgstr ""
#~ "Z-axis position (height) for\n"
#~ "the last move."

#~ msgid ""
#~ "The json file that dictates\n"
#~ "gcode output."
#~ msgstr ""
#~ "The json file that dictates\n"
#~ "gcode output."

#~ msgid "<b>Type:    </b>"
#~ msgstr "<b>Type:    </b>"

#~ msgid "Drills Tool dia:"
#~ msgstr "Drills Tool dia:"

#~ msgid "Slots Tool dia:"
#~ msgstr "Slots Tool dia:"

#~ msgid "<b>Tool Dia:</b>"
#~ msgstr "<b>Tool Dia:</b>"

#~ msgid "<b>Tool Data</b>"
#~ msgstr "<b>Tool Data</b>"

#~ msgid ""
#~ "This is the height (Z) at which the CNC\n"
#~ "will go as the last move."
#~ msgstr ""
#~ "This is the height (Z) at which the CNC\n"
#~ "will go as the last move."

#~ msgid "Feed Rate Z (Plunge):"
#~ msgstr "Feed Rate Z (Plunge):"

#~ msgid ""
#~ "Cutting speed in the Z\n"
#~ "plane in units per minute"
#~ msgstr ""
#~ "Cutting speed in the Z\n"
#~ "plane in units per minute"

#~ msgid ""
#~ "Cutting speed in the XY\n"
#~ "plane in units per minute\n"
#~ "(in units per minute).\n"
#~ "This is for the rapid move G00.\n"
#~ "It is useful only for Marlin,\n"
#~ "ignore for any other cases."
#~ msgstr ""
#~ "Cutting speed in the XY\n"
#~ "plane in units per minute\n"
#~ "(in units per minute).\n"
#~ "This is for the rapid move G00.\n"
#~ "It is useful only for Marlin,\n"
#~ "ignore for any other cases."

#~ msgid "Cut over 1st pt"
#~ msgstr "Cut over 1st pt"

#~ msgid "<b>Paint Area:</b>"
#~ msgstr "<b>Paint Area:</b>"

#~ msgid "<b>CNC Tools Table</b>"
#~ msgstr "<b>CNC Tools Table</b>"

#~ msgid ""
#~ "Type here any G-Code commands you would\n"
#~ "like to add to the beginning of the generated file."
#~ msgstr ""
#~ "Type here any G-Code commands you would\n"
#~ "like to add to the beginning of the generated file."

#~ msgid ""
#~ "This is the diameter of the tool tip.\n"
#~ "The manufacturer specifies it."
#~ msgstr ""
#~ "This is the diameter of the tool tip.\n"
#~ "The manufacturer specifies it."

#~ msgid "Object:"
#~ msgstr "Object:"

#~ msgid "Units:"
#~ msgstr "Units:"

#~ msgid ""
#~ "- 'Itself': the non copper clearing extent\n"
#~ "is based on the object that is copper cleared.\n"
#~ " - 'Box': will do non copper clearing within the box\n"
#~ "specified by the object selected in the Ref. Object combobox."
#~ msgstr ""
#~ "- 'Itself': the non copper clearing extent\n"
#~ "is based on the object that is copper cleared.\n"
#~ " - 'Box': will do non copper clearing within the box\n"
#~ "specified by the object selected in the Ref. Object combobox."

#~ msgid "Geometry:"
#~ msgstr "Geometry:"

#~ msgid ""
#~ "Scale the selected object(s)\n"
#~ "using the Scale Factor X for both axis."
#~ msgstr ""
#~ "Scale the selected object(s)\n"
#~ "using the Scale Factor X for both axis."

#~ msgid "<b>Excellon Format:</b>"
#~ msgstr "<b>Excellon Format:</b>"

#~ msgid "<b>Tools:</b>"
#~ msgstr "<b>Tools:</b>"

#~ msgid "<b>Export G-Code:</b>"
#~ msgstr "<b>Export G-Code:</b>"

#~ msgid "How to select the polygons to paint."
#~ msgstr "How to select the polygons to paint."

#~ msgid "<b>V-Shape Tool Calculator:</b>"
#~ msgstr "<b>V-Shape Tool Calculator:</b>"

#~ msgid "<b>ElectroPlating Calculator:</b>"
#~ msgstr "<b>ElectroPlating Calculator:</b>"

#~ msgid "<b>Name:</b>"
#~ msgstr "<b>Name:</b>"

#~ msgid "<b>Plot kind:</b>"
#~ msgstr "<b>Plot kind:</b>"

#~ msgid "<b>Display Annotation:</b>"
#~ msgstr "<b>Display Annotation:</b>"

#~ msgid "<b>GERBER:</b>"
#~ msgstr "<b>GERBER:</b>"

#~ msgid "<b>EXCELLON:</b>"
#~ msgstr "<b>EXCELLON:</b>"

#~ msgid "<b>GEOMETRY</b>:"
#~ msgstr "<b>GEOMETRY</b>:"

#~ msgid "<b>Panel Type:</b>"
#~ msgstr "<b>Panel Type:</b>"

#~ msgid "<b>Excellon format:</b>"
#~ msgstr "<b>Excellon format:</b>"

#~ msgid "<b>Gerber Objects</b>"
#~ msgstr "<b>Gerber Objects</b>"

#~ msgid "<b>Geometry Objects</b>"
#~ msgstr "<b>Geometry Objects</b>"

#~ msgid "Save &Defaults"
#~ msgstr "Save &Defaults"

#~ msgid "Tool dia:                   "
#~ msgstr "Tool dia:                   "

#~ msgid ""
#~ "The diameter of the cutting\n"
#~ "tool.."
#~ msgstr ""
#~ "The diameter of the cutting\n"
#~ "tool.."

#~ msgid "[WARNING_NOTCL] Move cancelled. No shape selected."
#~ msgstr "[WARNING_NOTCL] Move cancelled. No shape selected."

#~ msgid "Copy as &Geom"
#~ msgstr "Copy as &Geom"

#~ msgid ""
#~ "Change the size of the selected apertures.\n"
#~ "Factor by which to multiply\n"
#~ "geometric features of this object."
#~ msgstr ""
#~ "Change the size of the selected apertures.\n"
#~ "Factor by which to multiply\n"
#~ "geometric features of this object."

#~ msgid "Ap. Buffer Factor:"
#~ msgstr "Ap. Buffer Factor:"

#~ msgid ""
#~ "Change the size of the selected apertures.\n"
#~ "Factor by which to expand/shrink\n"
#~ "geometric features of this object."
#~ msgstr ""
#~ "Change the size of the selected apertures.\n"
#~ "Factor by which to expand/shrink\n"
#~ "geometric features of this object."

#~ msgid "Out"
#~ msgstr "Out"

#~ msgid "Pos"
#~ msgstr "Pos"

#~ msgid "Neg"
#~ msgstr "Neg"

#~ msgid "Solid   "
#~ msgstr "Solid   "

#~ msgid "M-Color   "
#~ msgstr "M-Color   "

#~ msgid "Click on CENTER ..."
#~ msgstr "Click on CENTER ..."

#~ msgid "[success] Done. Region completed."
#~ msgstr "[success] Done. Region completed."

#~ msgid "Del Aperture:"
#~ msgstr "Del Aperture:"

#~ msgid ""
#~ "Delete a aperture in the aperture list.\n"
#~ "It will delete also the associated geometry."
#~ msgstr ""
#~ "Delete a aperture in the aperture list.\n"
#~ "It will delete also the associated geometry."

#~ msgid "Save && Close Edit"
#~ msgstr "Save && Close Edit"

#~ msgid ""
#~ "<b>Editor Shortcut list</b><br>\n"
#~ "            <br>\n"
#~ "            <strong><span style=\"color:#0000ff\">GEOMETRY EDITOR</span></"
#~ "strong><br>\n"
#~ "    \n"
#~ "            <table border=\"0\" cellpadding=\"0\" cellspacing=\"0\" style="
#~ "\"width:283px\">\n"
#~ "                <tbody>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\" width=\"89\"><strong>A</"
#~ "strong></td>\n"
#~ "                        <td width=\"194\">&nbsp;Draw an Arc</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>B</strong></td>\n"
#~ "                        <td>&nbsp;Buffer Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>C</strong></td>\n"
#~ "                        <td>&nbsp;Copy Geo Item</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>E</strong></td>\n"
#~ "                        <td>&nbsp;Polygon Intersection Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>I</strong></td>\n"
#~ "                        <td>&nbsp;Paint Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>J</strong></td>\n"
#~ "                        <td>&nbsp;Jump to Location (x, y)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>K</strong></td>\n"
#~ "                        <td>&nbsp;Toggle Corner Snap</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>M</strong></td>\n"
#~ "                        <td>&nbsp;Move Geo Item</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>N</strong></td>\n"
#~ "                        <td>&nbsp;Draw a Polygon</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>O</strong></td>\n"
#~ "                        <td>&nbsp;Draw a Circle</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>P</strong></td>\n"
#~ "                        <td>&nbsp;Draw a Path</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>R</strong></td>\n"
#~ "                        <td>&nbsp;Draw Rectangle</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>S</strong></td>\n"
#~ "                        <td>&nbsp;Polygon Substraction Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>T</strong></td>\n"
#~ "                        <td>&nbsp;Add Text Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>U</strong></td>\n"
#~ "                        <td>&nbsp;Polygon Union Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>X</strong></td>\n"
#~ "                        <td>&nbsp;Flip shape on X axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Y</strong></td>\n"
#~ "                        <td>&nbsp;Flip shape on Y axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Shift+X</strong></td>\n"
#~ "                        <td>&nbsp;Skew shape on X axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Shift+Y</strong></td>\n"
#~ "                        <td>&nbsp;Skew shape on Y axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Alt+R</strong></td>\n"
#~ "                        <td>&nbsp;Editor Transformation Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Alt+X</strong></td>\n"
#~ "                        <td>&nbsp;Offset shape on X axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Alt+Y</strong></td>\n"
#~ "                        <td>&nbsp;Offset shape on Y axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Ctrl+M</strong></td>\n"
#~ "                        <td>&nbsp;Measurement Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Ctrl+S</strong></td>\n"
#~ "                        <td>&nbsp;Save Object and Exit Editor</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Ctrl+X</strong></td>\n"
#~ "                        <td>&nbsp;Polygon Cut Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Space</strong></td>\n"
#~ "                        <td>&nbsp;Rotate Geometry</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ENTER</strong></td>\n"
#~ "                        <td>&nbsp;Finish drawing for certain tools</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ESC</strong></td>\n"
#~ "                        <td>&nbsp;Abort and return to Select</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Del</strong></td>\n"
#~ "                        <td>&nbsp;Delete Shape</td>\n"
#~ "                    </tr>\n"
#~ "                </tbody>\n"
#~ "            </table>\n"
#~ "            <br>\n"
#~ "            <br>\n"
#~ "            <strong><span style=\"color:#ff0000\">EXCELLON EDITOR</span></"
#~ "strong><br>\n"
#~ "            <table border=\"0\" cellpadding=\"0\" cellspacing=\"0\" style="
#~ "\"width:283px\">\n"
#~ "                <tbody>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\" width=\"89\"><strong>A</"
#~ "strong></td>\n"
#~ "                        <td width=\"194\">&nbsp;Add Drill Array</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>C</strong></td>\n"
#~ "                        <td>&nbsp;Copy Drill(s)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>D</strong></td>\n"
#~ "                        <td>&nbsp;Add Drill</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>J</strong></td>\n"
#~ "                        <td>&nbsp;Jump to Location (x, y)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>M</strong></td>\n"
#~ "                        <td>&nbsp;Move Drill(s)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>R</strong></td>\n"
#~ "                        <td>&nbsp;Resize Drill(s)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>T</strong></td>\n"
#~ "                        <td>&nbsp;Add a new Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Del</strong></td>\n"
#~ "                        <td>&nbsp;Delete Drill(s)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Del</strong></td>\n"
#~ "                        <td>&nbsp;Alternate: Delete Tool(s)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ESC</strong></td>\n"
#~ "                        <td>&nbsp;Abort and return to Select</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Ctrl+S</strong></td>\n"
#~ "                        <td>&nbsp;Save Object and Exit Editor</td>\n"
#~ "                    </tr>\n"
#~ "                </tbody>\n"
#~ "            </table>\n"
#~ "                    "
#~ msgstr ""
#~ "<b>Editor Shortcut list</b><br>\n"
#~ "            <br>\n"
#~ "            <strong><span style=\"color:#0000ff\">GEOMETRY EDITOR</span></"
#~ "strong><br>\n"
#~ "    \n"
#~ "            <table border=\"0\" cellpadding=\"0\" cellspacing=\"0\" style="
#~ "\"width:283px\">\n"
#~ "                <tbody>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\" width=\"89\"><strong>A</"
#~ "strong></td>\n"
#~ "                        <td width=\"194\">&nbsp;Draw an Arc</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>B</strong></td>\n"
#~ "                        <td>&nbsp;Buffer Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>C</strong></td>\n"
#~ "                        <td>&nbsp;Copy Geo Item</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>E</strong></td>\n"
#~ "                        <td>&nbsp;Polygon Intersection Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>I</strong></td>\n"
#~ "                        <td>&nbsp;Paint Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>J</strong></td>\n"
#~ "                        <td>&nbsp;Jump to Location (x, y)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>K</strong></td>\n"
#~ "                        <td>&nbsp;Toggle Corner Snap</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>M</strong></td>\n"
#~ "                        <td>&nbsp;Move Geo Item</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>N</strong></td>\n"
#~ "                        <td>&nbsp;Draw a Polygon</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>O</strong></td>\n"
#~ "                        <td>&nbsp;Draw a Circle</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>P</strong></td>\n"
#~ "                        <td>&nbsp;Draw a Path</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>R</strong></td>\n"
#~ "                        <td>&nbsp;Draw Rectangle</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>S</strong></td>\n"
#~ "                        <td>&nbsp;Polygon Substraction Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>T</strong></td>\n"
#~ "                        <td>&nbsp;Add Text Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>U</strong></td>\n"
#~ "                        <td>&nbsp;Polygon Union Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>X</strong></td>\n"
#~ "                        <td>&nbsp;Flip shape on X axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Y</strong></td>\n"
#~ "                        <td>&nbsp;Flip shape on Y axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Shift+X</strong></td>\n"
#~ "                        <td>&nbsp;Skew shape on X axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Shift+Y</strong></td>\n"
#~ "                        <td>&nbsp;Skew shape on Y axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Alt+R</strong></td>\n"
#~ "                        <td>&nbsp;Editor Transformation Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Alt+X</strong></td>\n"
#~ "                        <td>&nbsp;Offset shape on X axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Alt+Y</strong></td>\n"
#~ "                        <td>&nbsp;Offset shape on Y axis</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Ctrl+M</strong></td>\n"
#~ "                        <td>&nbsp;Measurement Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Ctrl+S</strong></td>\n"
#~ "                        <td>&nbsp;Save Object and Exit Editor</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Ctrl+X</strong></td>\n"
#~ "                        <td>&nbsp;Polygon Cut Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Space</strong></td>\n"
#~ "                        <td>&nbsp;Rotate Geometry</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ENTER</strong></td>\n"
#~ "                        <td>&nbsp;Finish drawing for certain tools</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ESC</strong></td>\n"
#~ "                        <td>&nbsp;Abort and return to Select</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Del</strong></td>\n"
#~ "                        <td>&nbsp;Delete Shape</td>\n"
#~ "                    </tr>\n"
#~ "                </tbody>\n"
#~ "            </table>\n"
#~ "            <br>\n"
#~ "            <br>\n"
#~ "            <strong><span style=\"color:#ff0000\">EXCELLON EDITOR</span></"
#~ "strong><br>\n"
#~ "            <table border=\"0\" cellpadding=\"0\" cellspacing=\"0\" style="
#~ "\"width:283px\">\n"
#~ "                <tbody>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\" width=\"89\"><strong>A</"
#~ "strong></td>\n"
#~ "                        <td width=\"194\">&nbsp;Add Drill Array</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>C</strong></td>\n"
#~ "                        <td>&nbsp;Copy Drill(s)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>D</strong></td>\n"
#~ "                        <td>&nbsp;Add Drill</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>J</strong></td>\n"
#~ "                        <td>&nbsp;Jump to Location (x, y)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>M</strong></td>\n"
#~ "                        <td>&nbsp;Move Drill(s)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>R</strong></td>\n"
#~ "                        <td>&nbsp;Resize Drill(s)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>T</strong></td>\n"
#~ "                        <td>&nbsp;Add a new Tool</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Del</strong></td>\n"
#~ "                        <td>&nbsp;Delete Drill(s)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Del</strong></td>\n"
#~ "                        <td>&nbsp;Alternate: Delete Tool(s)</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\">&nbsp;</td>\n"
#~ "                        <td>&nbsp;</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>ESC</strong></td>\n"
#~ "                        <td>&nbsp;Abort and return to Select</td>\n"
#~ "                    </tr>\n"
#~ "                    <tr height=\"20\">\n"
#~ "                        <td height=\"20\"><strong>Ctrl+S</strong></td>\n"
#~ "                        <td>&nbsp;Save Object and Exit Editor</td>\n"
#~ "                    </tr>\n"
#~ "                </tbody>\n"
#~ "            </table>\n"
#~ "                    "

#~ msgid "[ERROR_NOTCL]Could not load defaults file."
#~ msgstr "[ERROR_NOTCL]Could not load defaults file."

#~ msgid ""
#~ "[ERROR_NOTCL] The aperture scale factor value is missing or wrong format."
#~ msgstr ""
#~ "[ERROR_NOTCL] The aperture scale factor value is missing or wrong format."

#~ msgid "[WARNING_NOTCL]Export Machine Code cancelled ..."
#~ msgstr "[WARNING_NOTCL]Export Machine Code cancelled ..."

#~ msgid "[success] GUI settings deleted ..."
#~ msgstr "[success] GUI settings deleted ..."

#~ msgid "Buffer Factor:"
#~ msgstr "Buffer Factor:"

#~ msgid "<b>Generate new Gerber Object:</b>"
#~ msgstr "<b>Generate new Gerber Object:</b>"

#~ msgid "Will generate a new Gerber object from the changed apertures."
#~ msgstr "Will generate a new Gerber object from the changed apertures."

#~ msgid ""
#~ "Will generate a new Gerber object from the changed apertures.\n"
#~ "This new object can then be isolated etc."
#~ msgstr ""
#~ "Will generate a new Gerber object from the changed apertures.\n"
#~ "This new object can then be isolated etc."

#~ msgid "[success]Offset on the %s axis done ..."
#~ msgstr "[success]Offset on the %s axis done ..."

#~ msgid ""
#~ "How much (fraction) of the tool width to overlap each tool pass.\n"
#~ "Example:\n"
#~ "A value here of 0.25 means 25\\% from the tool diameter found above.\n"
#~ "\n"
#~ "Adjust the value starting with lower values\n"
#~ "and increasing it if areas that should be painted are still \n"
#~ "not painted.\n"
#~ "Lower values = faster processing, faster execution on PCB.\n"
#~ "Higher values = slow processing and slow execution on CNC\n"
#~ "due of too many paths."
#~ msgstr ""
#~ "How much (fraction) of the tool width to overlap each tool pass.\n"
#~ "Example:\n"
#~ "A value here of 0.25 means 25\\% from the tool diameter found above.\n"
#~ "\n"
#~ "Adjust the value starting with lower values\n"
#~ "and increasing it if areas that should be painted are still \n"
#~ "not painted.\n"
#~ "Lower values = faster processing, faster execution on PCB.\n"
#~ "Higher values = slow processing and slow execution on CNC\n"
#~ "due of too many paths."

#~| msgid "z_toolchange = Z coord for Toolchange"
#~ msgid "z_move = Z coord for Toolchange"
#~ msgstr "z_move = Z coord for Toolchange"

#~ msgid "%s/Project_%s"
#~ msgstr "%s/Project_%s"

#~ msgid "tool_tab"
#~ msgstr "tool_tab"